diff --git a/README b/README
index d530cae..c1deff6 100644
--- a/README
+++ b/README
@@ -9,10 +9,14 @@ Download
 
 Version number of snmpbuilder with same with zabbix version for that it works.
 
-SnmpBuilder 1.8.1
+SnmpBuilder 3.2
+
+WARNING! 
+This version is ported to zabbix 3.2 and IS NOT COMPATIBLE with zabbix 1.x/2.x. I wasn't tested it on zabbix 3.0, though. Mikhail Vasilyev.
 
 Change log:
 
+    * Ported to zabbix 3.2
     * Fix undefined index warnings.
     * Include danrog's fix for non-numeric indexes.
     * From 1.8.1, zabbix not accept specified chars in key name. So I must replace them with underscore.
@@ -34,27 +38,59 @@ I try my best to not patch Zabbix's code, but still did a little to integrate th
 
 define('MIBS_ALL_PATH', '/home/zabbix/public_html/snmp_builder/mibs:/usr/share/snmp/mibs');
 
-* Open include/menu.inc.php. At line 203, insert a piece of code
-
-                                  array('url'=>'snmp_builder.php',
-						'label'=>'SNMP Builder'
-					),
-
-Like this:
-
-		                      'label'=>S_NOTIFICATIONS
-					),
-				array('url'=>'locales.php',
-						'label'=>S_LOCALES
-					),
-				array('url'=>'snmp_builder.php',
-						'label'=>'SNMP Builder'
-					),
-				array('url'=>'instal.php',
-						'label'=>S_INSTALLATION,
-						'sub_pages'=>array('setup.php','warning.php')
-					)
-				)
+* Open include/menu.inc.php.
+
+Find function zbx_construct_menu and add the following "page" in "config" section of $zbx_menu structure:
+(as for the moment of this writing, it's about line 222):
+
+                                [
+                                        'url' => 'snmp_builder.php',
+                                        'label' => 'SNMP Builder'
+                                ],
+
+So the code would look like this:
+
+                                [
+                                        'url' => 'hosts.php',
+                                        'label' => _('Hosts'),
+                                        'sub_pages' => [
+                                                'items.php',
+                                                'triggers.php',
+                                                'graphs.php',
+                                                'applications.php',
+                                                'tr_logform.php',
+                                                'tr_testexpr.php',
+                                                'popup_trexpr.php',
+                                                'host_discovery.php',
+                                                'disc_prototypes.php',
+                                                'trigger_prototypes.php',
+                                                'host_prototypes.php',
+                                                'httpconf.php',
+                                                'popup_httpstep.php'
+                                        ]
+                                ],
+                                [
+                                        'url' => 'snmp_builder.php',
+                                        'label' => 'SNMP Builder'
+                                ],
+                                [
+                                        'url' => 'maintenance.php',
+                                        'label' => _('Maintenance')
+                                ],
+
+(you actually can choose, where to put this item in menu of zabbix. My decision is to put it into "Configuration" menu 
+between "Hosts" and "Maintainance" entries )
+
+
+
+* Open jsLoader.php. Add some values to $availableJScripts to make lines around line 51 look array like this:
+
+$availableJScripts = [
+        // snmp_builder
+        '../snmp_builder/Tree.js' => '',
+        '../snmp_builder/snmp_builder.js' => '',
+        '../snmp_builder/DynTable.js' => '',
+        // /snmp_builder
 
 It for integrate snmp_builder.php as a menu item under Administration tab and between Locales and Install menu. In fact, you can add it in any place.
 
diff --git a/snmp_builder.php b/snmp_builder.php
index c3e1c32..ecd8375 100644
--- a/snmp_builder.php
+++ b/snmp_builder.php
@@ -23,7 +23,7 @@
 ?>
 <?php
 
-define('MIBS_ALL_PATH', '/home/zabbix/public_html/snmp_builder/mibs:/usr/share/snmp/mibs');
+define('MIBS_ALL_PATH', '/var/www/html/zabbix/snmp_builder/mibs:/usr/share/snmp/mibs');
 
 require_once('include/config.inc.php');
 
@@ -231,52 +231,54 @@
 			// From 1.8.1 zabbix not accept special char in key, :( so we must replace them with underscore
 			$newkey = preg_replace('/[^0-9a-zA-Z_\.]/','_',$oid[0]);
 			
-			$item = array(
+			$item = [
 				'description'	=> $oid[0],
+                                'name'                  => $oid[0],
 				'key_'			=> $newkey,
 				'hostid'		=> $templateid,
 				'delay'		=> $oid[4],
-				'history'		=> 90,
+				'history'		=> 90*3600,
 				'status'		=> ITEM_STATUS_ACTIVE,
 				'type'			=> ITEM_TYPE_SNMPV2C,
 				'snmp_community'=> $community,
 				'snmp_oid'		=> $oid_num,
 				'value_type'	=> $value_type,
-				'trapper_hosts'	=> null,
-				'snmp_port'		=> null,
+//				'trapper_hosts'	=> null,
+//// //				'snmp_port'		=> null,
 				'units'			=> $oid[3],
 				'multiplier'	=> $multiplier,
 				'delta'			=> $delta,
-				'snmpv3_securityname'	=> null,
+/*				'snmpv3_securityname'	=> null,
 				'snmpv3_securitylevel'	=> null,
 				'snmpv3_authpassphrase'	=> null,
-				'snmpv3_privpassphrase'	=> null,
+				'snmpv3_privpassphrase'	=> null, */
 				'formula'			=> $oid[5],
-				'trends'			=> null,
+/*				'trends'			=> null,
 				'logtimefmt'		=> null,
-				'valuemapid'		=> null,
+				'valuemapid'		=> null,*/
 				'delay_flex'		=> null,
-				'authtype'		=> null,
+/*				'authtype'		=> null,
 				'username'		=> null,
 				'password'		=> null,
 				'publickey'		=> null,
 				'privatekey'		=> null,
 				'params'			=> null,
-				'ipmi_sensor'		=> null,
-				'data_type'		=> $data_type);
+				'ipmi_sensor'		=> null, */
+				'data_type'		=> $data_type];
 				
 			array_push($items, $item);
 
 		}
 		
 		
-		foreach ($items as $item)
-		{
+#		foreach ($items as $item)
+#		{
 			DBstart();
 			$itemid = false;
-			$itemid = add_item($item);
+			$itemid = API::Item()->create($items);
+                        
 			$result = DBend($itemid);
-		}
+#		}
 		
 		
 		
@@ -322,7 +324,7 @@
 	}
 	
 	$form->addItem(array('MIB:'.SPACE,$cmbMibs,SPACE));
-	
+	$form->addItem((new CTag('br')));
 	// server textbox
 	$ipbServer = new CTextBox('server_ip',$server_ip);
 	$form->addItem(array('Server:'.SPACE,$ipbServer,SPACE));
@@ -331,7 +333,9 @@
 	$tbCommunity = new CTextBox('community',$community);
 	$form->addItem(array('Community:'.SPACE,$tbCommunity ,SPACE));
 	
-	$snmp_wdgt->addHeader('SNMP Builder', $form);
+	#$snmp_wdgt->addHeader('SNMP Builder', $form);
+	$snmp_wdgt->setTitle('SNMP Builder');
+        $snmp_wdgt->setControls($form);
 	
 	//Body
 	$outer_table = new CTable();
@@ -344,23 +348,20 @@
 	//Left panel
 	$left_tab = new CTable();
 	//Oid tree
-	$oid_tree_w = new CWidget();
-	$oid_tree_w->setClass('header');
-	$oid_tree_w->addHeader("Oid Tree");
+	$oid_tree_w = new CColHeader("Oid Tree");
 	
 	$oid_tree_div = new CDiv();
 	$oid_tree_div->setAttribute("id","oidtree");
 	
 	$oid_tree_container = new CDiv($oid_tree_div);
-	$oid_tree_container->addStyle("overflow: auto; background-color: rgb(255, 255, 255); height: 300px; width: 300px;");
+        $oid_tree_container->addClass(ZBX_STYLE_TREEVIEW);
+	$oid_tree_container->addStyle("overflow: auto; height: 300px; width: 300px;");
 	
 	$oid_tree_w->addItem($oid_tree_container);
 	$left_tab->addRow($oid_tree_w);
 	
 	//Oid description
-	$oid_info_w = new CWidget();
-	$oid_info_w->setClass('header');
-	$oid_info_w->addHeader("Information");
+	$oid_info_w = new CColHeader("Information");
 	
 	$oid_info_div = new CDiv();
 	$oid_info_div->setAttribute("id","oidinfo");
@@ -371,9 +372,9 @@
 	//Right panel
 	$right_tab = new CTable();
 	//Oidview
-	$oid_view_w = new CWidget();
-	$oid_view_w->setClass('header');
-	$oid_view_w->addHeader(array("Oid View - click to view as table:",new CCheckBox('viewtype','no','onViewType()',1)));
+	$oid_view_w = (new CColHeader(
+                        ( (new CCheckBox('viewtype'))->onClick('onViewType()') ) ));
+//	$oid_view_w->addHeader(array("Oid View - click to view as table:",));
 	
 	
 	$oid_view_div =  new CDiv();
@@ -381,11 +382,8 @@
 	$oid_view_div ->addStyle("overflow: auto; max-height: 250px; width: 800px");
 	$oid_view_w->addItem($oid_view_div);
 	$right_tab->addRow($oid_view_w);
-	
 	//Itemlist
-	$item_list_w = new CWidget();
-	$item_list_w->setClass('header');
-	$item_list_w->addHeader("Item List");
+	$item_list_w = new CColHeader('Item List');
 	
 	$item_list_div = new CDiv();
 	$item_list_div->setAttribute("id","itemlist");
@@ -394,16 +392,13 @@
 	$right_tab->addRow($item_list_w);
 	
 	//Action srow
-	$action_w= new CWidget();
-	$action_w->setClass('header');
-	
-	$action_w->addHeader(array(new CButton('save','Save','javascript: onSaveItems()'), SPACE, new CButton('clear','Clear List','javascript: onClearItems()')));
-	//$action_div = new CDiv();
-	//$action_w->addItem($action_div);
-	$right_tab->addRow($action_w);
-	
+        
+	$action_w= (new CButton('save',_('Save')))->addStyle("margin: 10px;")->onClick('onSaveItems()');
+	$action_c= (new CButton('clear',_('Clear')))->addStyle("margin: 10px;")->onClick('onClearItems()');
+
+	$right_tab->addRow([[],[$action_w,$action_c ]]);
+
 	// Left panel
-	
 	$td_l = new CCol($left_tab);
 	$td_l->setAttribute('valign','top');
 	$td_l->setAttribute('width','300px');
@@ -561,11 +556,20 @@ function get_templates()
 			'nopermissions' => 1
 		);
 	$template = array();
-	foreach (CTemplate::get($options) as $key => $value)
+        $templateget = API::Template()->get([
+               'output' => ['templateid', 'name'],
+               'preservekeys' => true
+        ]);
+
+#	foreach (CTemplate::get($options) as $key => $value)
+#	{
+#		array_push($template, array('key' => $key, 'host' => $value['host']));
+#	}
+#	
+	foreach ($templateget as $key => $value)
 	{
-		array_push($template, array('key' => $key, 'host' => $value['host']));
+		array_push($template, array('key' => $key, 'host' => $value['name']));
 	}
-	
 	return $template;
 	
 }
diff --git a/snmp_builder/DynTable.js b/snmp_builder/DynTable.js
index ccb58f4..b99a74c 100644
--- a/snmp_builder/DynTable.js
+++ b/snmp_builder/DynTable.js
@@ -93,7 +93,7 @@ DynTable.prototype = {
 	
 	createTable : function(){
 		this.container.update();
-		this.container.insert({ top: '<table class= "tableinfo" cellspacing="1" cellpadding="3" id="dyntable-'+this.element+'"></table>' });
+		this.container.insert({ top: '<table class= "list-table" cellspacing="1" cellpadding="3" id="dyntable-'+this.element+'"></table>' });
 		this.table = $('dyntable-'+this.element);
 		this.tbody = new Element('tbody');
 		this.table.insert({top: this.tbody});
@@ -163,4 +163,4 @@ DynTable.prototype = {
 			this.tbody.insert({ bottom: row });
 		}
 	}
-};
\ No newline at end of file
+};
diff --git a/snmp_builder/Tree.js b/snmp_builder/Tree.js
index e2f5bc4..447c83a 100644
--- a/snmp_builder/Tree.js
+++ b/snmp_builder/Tree.js
@@ -3392,9 +3392,13 @@ TafelTreeBaseBranch.prototype = {
 		if (this.objDrag) {
 			this.objDrag.destroy();
 		}
-		Droppables.remove(this.txt);
+//		Droppables.remove(this.txt);
 		for (var i = 0; i < this.children.length; i++) {
+                    try {
 			this.children[i].removeDragDrop();
+                    } catch (err) {
+                        console.log(err.message);
+                    };
 		}
 	},
 	
@@ -3978,9 +3982,9 @@ TafelTreeBaseBranch.prototype = {
 				Element.addClassName(this.txt, this.tree.classDrag);
 			}
 		}
-		if (this.struct.acceptdrop) {
+/*		if (this.struct.acceptdrop) {
 			Droppables.add(this.txt, {hoverclass: this.tree.classDragOver, onDrop: this.setDrop.bindAsEventListener(this)});
-		}
+		}*/
 		if (this.struct.tooltip) {
 			Event.observe(event, 'mouseover', this.evt_showTooltip.bindAsEventListener(this), false);
 			Event.observe(event, 'mouseout', this.evt_hideTooltip.bindAsEventListener(this), false);
@@ -5871,4 +5875,4 @@ function TafelTreeInitBase (ev) {
 	}
 };
 
-Event.observe(window, 'load', TafelTreeInitBase, false);
\ No newline at end of file
+Event.observe(window, 'load', TafelTreeInitBase, false);
diff --git a/snmp_builder/mibs/ACCOUNTING-CONTROL-MIB.mib b/snmp_builder/mibs/ACCOUNTING-CONTROL-MIB.mib
new file mode 100644
index 0000000..5f4843c
--- /dev/null
+++ b/snmp_builder/mibs/ACCOUNTING-CONTROL-MIB.mib
@@ -0,0 +1,768 @@
+ACCOUNTING-CONTROL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    mib-2, Integer32                              FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, TestAndIncr,
+    DisplayString, TruthValue                     FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                                                  FROM SNMPv2-CONF
+    ifIndex                                       FROM IF-MIB;
+
+accountingControlMIB MODULE-IDENTITY
+    LAST-UPDATED "9809281000Z"
+    ORGANIZATION "IETF AToM MIB Working Group"
+    CONTACT-INFO "Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive,
+                  San Jose CA 95134-1706.
+                  Phone: +1 408 526 5260
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module for managing the collection and storage of
+            accounting information for connections in a connection-
+            oriented network such as ATM."
+    ::= { mib-2 60 }
+
+acctngMIBObjects       OBJECT IDENTIFIER ::= { accountingControlMIB 1 }
+
+acctngSelectionControl OBJECT IDENTIFIER ::= { acctngMIBObjects 1 }
+acctngFileControl      OBJECT IDENTIFIER ::= { acctngMIBObjects 2 }
+acctngInterfaceControl OBJECT IDENTIFIER ::= { acctngMIBObjects 3 }
+acctngTrapControl      OBJECT IDENTIFIER ::= { acctngMIBObjects 4 }
+
+-- Textual Conventions
+
+DataCollectionSubtree ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The subtree component of a (subtree, list) tuple.  Such a
+            (subtree, list) tuple defines a set of objects and their
+            values to be collected as accounting data for a connection.
+            The subtree specifies a single OBJECT IDENTIFIER value such
+            that each object in the set is named by the subtree value
+
+            appended with a single additional sub-identifier."
+    SYNTAX       OBJECT IDENTIFIER
+
+DataCollectionList ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The list component of a (subtree, list) tuple.  Such a
+            (subtree, list) tuple defines a set of objects and their
+            values to be collected as accounting data for a connection.
+            The subtree specifies a single OBJECT IDENTIFIER value such
+            that each object in the set is named by the subtree value
+            appended with a single additional sub-identifier.  The list
+            specifies a set of data items, where the presence of an item
+            in the list indicates that the item is (to be) present in
+            the data collected for a connection; the absence of an item
+            from the list indicates that the item is not (to be) present
+            in the data collected for a connection.  Each data item is
+            represented by an integer which when appended (as as
+            additional sub-identifier) to the OBJECT IDENTIFIER value of
+            the subtree identified by the tuple, is the name of an
+            object defining that data item (its description and its
+            syntax).
+
+            The list is specified as an OCTET STRING in which each data
+            item is represented by a single bit, where data items 1
+            through 8 are represented by the bits in the first octet,
+            data items 9 through 16 by the bits in the second octet,
+            etc.  In each octet, the lowest numbered data item is
+            represented by the most significant bit, and the highest
+            numbered data item by the least significant bit.  A data
+            item is present in the list when its bit is set, and absent
+            when its bit is reset.  If the length of an OCTET STRING
+            value is too short to represent one or more data items
+            defined in a subtree, then those data items are absent from
+            the set identified by the tuple of that subtree and that
+            OCTET STRING value."
+    SYNTAX       OCTET STRING (SIZE(0..8))
+
+FileIndex ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An arbitrary integer value identifying a file into which
+            accounting data is being collected."
+    SYNTAX       Integer32 (1..65535)
+
+-- The Accounting Information Selection table
+
+acctngSelectionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AcctngSelectionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of accounting information selection entries.
+
+            Note that additions, modifications and deletions of entries
+            in this table can occur at any time, but such changes only
+            take effect on the next occasion when collection begins into
+            a new file.  Thus, between modification and the next 'swap',
+            the content of this table does not reflect the current
+            selection."
+    ::= { acctngSelectionControl 1 }
+
+acctngSelectionEntry OBJECT-TYPE
+    SYNTAX      AcctngSelectionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry identifying an (subtree, list) tuple used to
+            select a set of accounting information which is to be
+            collected."
+    INDEX   { acctngSelectionIndex }
+    ::= { acctngSelectionTable 1 }
+
+AcctngSelectionEntry ::=
+    SEQUENCE {
+        acctngSelectionIndex     Integer32,
+        acctngSelectionSubtree   DataCollectionSubtree,
+        acctngSelectionList      DataCollectionList,
+        acctngSelectionFile      FileIndex,
+        acctngSelectionType      BITS,
+        acctngSelectionRowStatus RowStatus
+    }
+
+acctngSelectionIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary integer value which uniquely identifies a
+            tuple stored in this table.  This value is required to be
+            the permanent 'handle' for an entry in this table for as
+            long as that entry exists, including across restarts and
+            power outages."
+    ::= { acctngSelectionEntry 1 }
+
+acctngSelectionSubtree OBJECT-TYPE
+    SYNTAX      DataCollectionSubtree
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The combination of acctngSelectionSubtree and
+            acctngSelectionList specifies one (subtree, list) tuple
+            which is to be collected."
+    ::= { acctngSelectionEntry 2 }
+
+acctngSelectionList OBJECT-TYPE
+    SYNTAX      DataCollectionList
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The combination of acctngSelectionSubtree and
+            acctngSelectionList specifies one (subtree, list) tuple
+            which is to be collected."
+    ::= { acctngSelectionEntry 3 }
+
+acctngSelectionFile OBJECT-TYPE
+    SYNTAX      FileIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An indication of the file into which the accounting
+            information identified by this entry is to be stored.  If
+            there is no conceptual row in the acctngFileTable for which
+            the value of acctngFileIndex has the same value as this
+            object, then the information selected by this entry is not
+            collected."
+    ::= { acctngSelectionEntry 4 }
+
+acctngSelectionType OBJECT-TYPE
+    SYNTAX      BITS { svcIncoming(0),
+                       svcOutgoing(1),
+                       svpIncoming(2),
+                       svpOutgoing(3),
+                       pvc(4),
+                       pvp(5),
+                       spvcOriginator(6),
+                       spvcTarget(7),
+                       spvpOriginator(8),
+                       spvpTarget(9) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "Indicates the types of connections for which the
+
+            information selected by this entry are to be collected."
+    DEFVAL      { { svcIncoming, svcOutgoing,
+                    svpIncoming, svpOutgoing } }
+    ::= { acctngSelectionEntry 5 }
+
+acctngSelectionRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this conceptual row.  An agent may refuse to
+            create new conceptual rows and/or modify existing conceptual
+            rows, if such creation/modification would cause multiple
+            rows to have the same values of acctngSelectionSubtree and
+            acctngSelectionList.
+
+            A conceptual row can not have the status of 'active' until
+            values have been assigned to the acctngSelectionSubtree,
+            acctngSelectionList and acctngSelectionFile columnar objects
+            within that row.
+
+            An agent must not refuse to change the values of the
+            acctngSelectionSubtree, acctngSelectionList and
+            acctngSelectionFile columnar objects within a conceptual row
+            even while that row's status is 'active'.  Similarly, an
+            agent must not refuse to destroy an existing conceptual row
+            while the file referenced by that row's instance of
+            acctngSelectionFile is in active use, i.e., while the
+            corresponding instance of acctngFileRowStatus has the value
+            'active'.  However, such changes only take effect upon the
+            next occasion when collection begins into a new (version of
+            the) file."
+    ::= { acctngSelectionEntry 6 }
+
+-- The Accounting File table
+
+acctngFileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AcctngFileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of files into which accounting information is to be
+            stored."
+    ::= { acctngFileControl 1 }
+
+acctngFileEntry OBJECT-TYPE
+    SYNTAX      AcctngFileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry identifying a file into which accounting
+            information is to be collected."
+    INDEX   { acctngFileIndex }
+    ::= { acctngFileTable 1 }
+
+AcctngFileEntry ::=
+    SEQUENCE {
+        acctngFileIndex                 FileIndex,
+        acctngFileName                  DisplayString,
+        acctngFileNameSuffix            DisplayString,
+        acctngFileDescription           DisplayString,
+        acctngFileCommand               INTEGER,
+        acctngFileMaximumSize           Integer32,
+        acctngFileCurrentSize           Integer32,
+        acctngFileFormat                INTEGER,
+        acctngFileCollectMode           BITS,
+        acctngFileCollectFailedAttempts BITS,
+        acctngFileInterval              Integer32,
+        acctngFileMinAge                Integer32,
+        acctngFileRowStatus             RowStatus
+    }
+
+acctngFileIndex OBJECT-TYPE
+    SYNTAX      FileIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A unique value identifying a file into which accounting
+            data is to be stored.  This value is required to be the
+            permanent 'handle' for an entry in this table for as long as
+            that entry exists, including across restarts and power
+            outages."
+    ::= { acctngFileEntry 1 }
+
+acctngFileName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The name of the file into which accounting data is to be
+            stored.  If files are named using suffixes, then the name of
+            the current file is the concatenation of acctngFileName and
+            acctngFileNameSuffix.
+
+            An agent will respond with an error (e.g., 'wrongValue') to
+            a management set operation which attempts to modify the
+
+            value of this object to the same value as already held by
+            another instance of acctngFileName.  An agent will also
+            respond with an error (e.g., 'wrongValue') if the new value
+            is invalid for use as a file name on the local file system
+            (e.g., many file systems do not support white space embedded
+            in file names).
+
+            The value of this object can not be modified while the
+            corresponding instance of acctngFileRowStatus is 'active'."
+    ::= { acctngFileEntry 2 }
+
+acctngFileNameSuffix OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..8))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The suffix, if any, of the name of a file into which
+            accounting data is currently being stored.  If suffixes are
+            not used, then the value of this object is the zero-length
+            string.  Note that if a separator, such as a period, is used
+            in appending the suffix to the file name, then that
+            separator appears as the first character of this value."
+    ::= { acctngFileEntry 3 }
+
+acctngFileDescription OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The textual description of the accounting data which will
+            be stored (on the next occasion) when header information is
+            stored in the file.  The value of this object may be
+            modified at any time."
+    DEFVAL      { "" }
+    ::= { acctngFileEntry 4 }
+
+acctngFileCommand OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    -- the following two values are states:
+                    -- they may be read but not written
+                    idle(1),
+                    cmdInProgress(2),
+                    -- the following two values are actions:
+                    -- they may be written, but are never read
+                    swapToNewFile(3),
+                    collectNow(4)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "A control object for the collection of accounting data.
+            When read the value is either 'idle' or 'cmdInProgress'.
+            Writing a value is only allowed when the current value is
+            'idle'.  When a value is successfully written, the value
+            changes to 'cmdInProgress' until completion of the action,
+            at which time the value reverts to 'idle'.  Actions are
+            invoked by writing the following values:
+
+               'swapToNewFile' - the collection of data into the current
+                      file is terminated, and collection continues into
+                      a new (version of the) file.
+
+               'collectNow' - the agent creates and stores a connection
+                      record into the current file for each active
+                      connection having a type matching
+                      acctngSelectionType and an age greater than
+                      acctngFileMinAge."
+    DEFVAL      { idle }
+    ::= { acctngFileEntry 5 }
+
+acctngFileMaximumSize OBJECT-TYPE
+    SYNTAX      Integer32 (100..2147483647)
+    UNITS       "bytes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The maximum size of the file (including header
+            information).  When the file of collected data reaches this
+            size, either the agent automatically swaps to a new version
+            (i.e., a new value acctngFileNameSuffix) of the file, or new
+            records are discarded.  Since a file must contain an
+            integral number of connection records, the actual maximum
+            size of the file may be just less OR Just greater than the
+            value of this object.
+
+            The value of this object can not be modified while the
+            corresponding instance of acctngFileRowStatus is 'active'.
+            The largest value of the maximum file size in some agents
+            will be less than 2147483647 bytes."
+    DEFVAL      { 5000000 }
+    ::= { acctngFileEntry 6 }
+
+acctngFileCurrentSize OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current size of the file into which data is currently
+            being collected, including header information."
+    ::= { acctngFileEntry 7 }
+
+acctngFileFormat OBJECT-TYPE
+    SYNTAX      INTEGER { other(1), ber(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An indication of the format in which the accounting data is
+            to be stored in the file.  If the value is modified, the new
+            value takes effect after the next 'swap' to a new file.  The
+            value ber(2) indicates the standard format."
+    DEFVAL      { ber }
+    ::= { acctngFileEntry 8 }
+
+acctngFileCollectMode OBJECT-TYPE
+    SYNTAX      BITS { onRelease(0), periodically(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An indication of when accounting data is to be written into
+            this file.  Note that in addition to the occasions indicated
+            by the value of this object, an agent always writes
+            information on appropriate connections to the file when the
+            corresponding instance of acctngFileCommand is set to
+            'collectNow'.
+
+              - 'onRelease' - whenever a connection (or possibly,
+                      connection attempt) is terminated, either through
+                      a Release message or through management removal,
+                      information on that connection is written.
+
+              - 'periodically' - information on appropriate connections
+                      is written on the expiry of a periodic timer,
+            This value may be modified at any time."
+    DEFVAL      { { onRelease } }
+    ::= { acctngFileEntry 9 }
+
+acctngFileCollectFailedAttempts OBJECT-TYPE
+    SYNTAX      BITS { soft(0), regular(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether connection data is to be collected
+
+            for failed connection attempts when the value of the
+            corresponding instance of acctngFileCollectMode includes
+            'onRelease'.  The individual values have the following
+            meaning:
+
+              'soft' - indicates that connection data is to be collected
+            for failed Soft PVCs/PVPs which originate or terminate at
+            the relevant interface.
+
+              'regular' - indicates that connection data is to be
+            collected for failed SVCs, including Soft PVCs/PVPs not
+            originating or terminating at the relevant interface.
+
+            This value may be modified at any time."
+    DEFVAL      { { soft, regular } }
+    ::= { acctngFileEntry 10 }
+
+acctngFileInterval OBJECT-TYPE
+    SYNTAX      Integer32 (60..86400)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The number of seconds between the periodic collections of
+            accounting data when the value of the corresponding instance
+            of acctngFileCollectMode includes 'periodically'.  Some
+            agents may impose restrictions on the range of this
+            interval.  This value may be modified at any time."
+    DEFVAL     { 3600 }
+    ::= { acctngFileEntry 11 }
+
+acctngFileMinAge OBJECT-TYPE
+    SYNTAX      Integer32 (60..86400)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The minimum age of a connection, as used to determine the
+            set of connections for which data is to be collected at the
+            periodic intervals and/or when acctngFileCommand is set to
+            'collectNow'.  The age of a connection is the elapsed time
+            since it was last installed.
+
+            When the periodic interval expires for a file or when
+            acctngFileCommand is set to 'collectNow', accounting data is
+            collected and stored in the file for each connection having
+            a type matching acctngSelectionType and whose age at that
+            time is greater than the value of acctngFileMinAge
+
+            associated with the file.  This value may be modified at any
+            time."
+    DEFVAL     { 3600 }
+    ::= { acctngFileEntry 12 }
+
+acctngFileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this conceptual row.
+
+            This object can not be set to 'active' until a value has
+            been assigned to the corresponding instance of
+            acctngFileName.  Collection of data into the file does not
+            begin until this object has the value 'active' and one or
+            more (active) instances of acctngSelectionFile refer to it.
+            If this value is modified after a collection has begun,
+            collection into this file terminates and a new (or new
+            version of the) file is immediately made ready for future
+            collection (as if acctngFileCommand had been set to
+            'swapToNewFile'), but collection into the new (or new
+            version of the) file does not begin until the value is
+            subsequently set back to active."
+    ::= { acctngFileEntry 13 }
+
+-- Overall Control
+
+acctngAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "A control object to indicate the administratively desired
+            state of the collection of accounting records across all
+            interfaces.
+
+            Modifying the value of acctngAdminStatus to 'disabled' does
+            not remove or change the current configuration as
+            represented by the active rows in the acctngSelectionTable,
+            acctngFileTable and acctngInterfaceTable tables."
+    ::= { acctngInterfaceControl 1 }
+
+acctngOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A status object to indicate the operational state of the
+            collection of accounting records across all interfaces.
+
+            When the value of acctngAdminStatus is modified to be
+            'enabled', the value of this object will change to 'enabled'
+            providing it is possible to begin collecting accounting
+            records.
+
+            When the value of acctngAdminStatus is modified to be
+            'disabled', the value of this object will change to
+            'disabled' as soon as the collection of accounting records
+            has terminated."
+    ::= { acctngInterfaceControl 2 }
+
+acctngProtection OBJECT-TYPE
+    SYNTAX      TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "A control object to protect against duplication of control
+            commands.  Over some transport/network protocols, it is
+            possible for SNMP messages to get duplicated.  Such
+            duplication, if it occurred at just the wrong time could
+            cause serious disruption to the collection and retrieval of
+            accounting data, e.g., if a SNMP message setting
+            acctngFileCommand to 'swapToNewFile' were to be duplicated,
+            a whole file of accounting data could be lost.
+
+            To protect against such duplication, a management
+            application should retrieve the value of this object, and
+            include in the Set operation needing protection, a variable
+            binding which sets this object to the retrieved value."
+    ::= { acctngInterfaceControl 3 }
+
+acctngAgentMode OBJECT-TYPE
+    SYNTAX      INTEGER { swapOnCommand(1), swapOnFull(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the behaviour mode of the agent when a
+            file becomes full:
+
+               'swapOnCommand' - the agent does not automatically swap
+                      to a new file; rather, it discards newly collected
+                      data until a management application subsequently
+                      instructs it to swap to a new file.
+
+               'swapOnFull' - the agent terminates collection into the
+
+                      current file as and when that file becomes full."
+    ::= { acctngInterfaceControl 4 }
+
+--  Per-interface control table
+
+acctngInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AcctngInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table controlling the collection of accounting data on
+            specific interfaces of the switch."
+    ::= { acctngInterfaceControl 5 }
+
+acctngInterfaceEntry OBJECT-TYPE
+    SYNTAX      AcctngInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry which controls whether accounting data is to be
+            collected on an interface.  The types of interfaces which
+            are represented in this table is implementation-specific."
+    INDEX   { ifIndex }
+    ::= { acctngInterfaceTable 1 }
+
+AcctngInterfaceEntry ::=
+    SEQUENCE {
+        acctngInterfaceEnable     TruthValue
+    }
+
+acctngInterfaceEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Indicates whether the collection of accounting data is
+            enabled on this interface."
+    ::= { acctngInterfaceEntry 1 }
+
+-- Objects for controlling the use of Notifications
+
+acctngControlTrapThreshold OBJECT-TYPE
+    SYNTAX      INTEGER (0..99)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "A percentage of the maximum file size at which a 'nearly-
+
+            full' trap is generated.  The value of 0 indicates that no
+            'nearly-full' trap is to be generated."
+    ::= { acctngTrapControl 1 }
+
+acctngControlTrapEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether the acctngFileNearlyFull and
+            acctngFileFull traps are enabled."
+    ::= { acctngTrapControl 2 }
+
+-- notifications
+
+acctngNotifications OBJECT IDENTIFIER ::= { accountingControlMIB 2 }
+
+acctngNotifyPrefix OBJECT IDENTIFIER ::= { acctngNotifications 0 }
+
+acctngFileNearlyFull NOTIFICATION-TYPE
+    OBJECTS     { acctngFileName,
+                  acctngFileMaximumSize,
+                  acctngControlTrapThreshold,
+                  acctngFileNameSuffix }
+    STATUS      current
+    DESCRIPTION
+            "An indication that the size of the file into which
+            accounting information is currently being collected has
+            exceeded the threshold percentage of its maximum file size.
+            This notification is generated only at the time of the
+            transition from not-exceeding to exceeding."
+    ::= { acctngNotifyPrefix 1 }
+
+acctngFileFull NOTIFICATION-TYPE
+    OBJECTS     { acctngFileName,
+                  acctngFileMaximumSize,
+                  acctngFileNameSuffix }
+    STATUS      current
+    DESCRIPTION
+            "An indication that the size of the file into which
+            accounting information is currently being collected has
+            transistioned to its maximum file size.  This notification
+            is generated (for all values of acctngAgentMode) at the time
+            of the transition from not-full to full.  If acctngAgentMode
+            has the value 'swapOnCommand', it is also generated
+            periodically thereafter until such time as collection of
+
+            data is no longer inhibited by the file full condition."
+    ::= { acctngNotifyPrefix 2 }
+
+-- conformance information
+
+acctngConformance OBJECT IDENTIFIER ::= { accountingControlMIB 3 }
+acctngGroups      OBJECT IDENTIFIER ::= { acctngConformance 1 }
+acctngCompliances OBJECT IDENTIFIER ::= { acctngConformance 2 }
+
+acctngCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for switches which implement the
+            Accounting Control MIB."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { acctngBasicGroup,
+                           acctngNotificationsGroup }
+
+        OBJECT      acctngSelectionType
+        SYNTAX      BITS { svcIncoming(0), svcOutgoing(1) }
+        DESCRIPTION "The minimal requirement is collection for SVCs."
+
+        OBJECT      acctngSelectionRowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT      acctngFileName
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT      acctngFileCommand
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT      acctngFileFormat
+        SYNTAX      INTEGER { ber(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION "Only the standard format is required, and write
+                    access is not required."
+
+        OBJECT      acctngFileMaximumSize
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT      acctngFileCollectMode
+        SYNTAX      BITS { onRelease(0) }
+        MIN-ACCESS  read-only
+        DESCRIPTION "The minimal requirement is for collection on
+                    connection release."
+
+        OBJECT      acctngFileInterval
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT      acctngFileCollectFailedAttempts
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT      acctngFileRowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION "Write access is not required."
+    ::= { acctngCompliances 1 }
+
+-- units of conformance
+
+acctngBasicGroup    OBJECT-GROUP
+    OBJECTS { acctngSelectionSubtree, acctngSelectionList,
+              acctngSelectionFile, acctngSelectionType,
+              acctngSelectionRowStatus, acctngFileName,
+              acctngFileNameSuffix, acctngFileDescription,
+              acctngFileCommand, acctngFileMaximumSize,
+              acctngFileCurrentSize, acctngFileRowStatus,
+              acctngFileFormat, acctngFileCollectMode,
+              acctngFileCollectFailedAttempts, acctngFileInterval,
+              acctngFileMinAge,
+              acctngAdminStatus, acctngOperStatus,
+              acctngProtection, acctngAgentMode,
+              acctngInterfaceEnable,
+              acctngControlTrapThreshold,
+              acctngControlTrapEnable
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing control of the basic
+            collection of accounting data for connection-oriented
+            networks."
+    ::= { acctngGroups 1 }
+
+acctngNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { acctngFileNearlyFull, acctngFileFull }
+    STATUS        current
+    DESCRIPTION
+            "The notifications of events relating to controlling the
+            collection of accounting data."
+    ::= { acctngGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/ADSL-LINE-EXT-MIB.mib b/snmp_builder/mibs/ADSL-LINE-EXT-MIB.mib
new file mode 100644
index 0000000..a89c248
--- /dev/null
+++ b/snmp_builder/mibs/ADSL-LINE-EXT-MIB.mib
@@ -0,0 +1,1169 @@
+ADSL-LINE-EXT-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+      Counter32,
+      Integer32,
+      NOTIFICATION-TYPE,
+      MODULE-IDENTITY,
+      OBJECT-TYPE                       FROM SNMPv2-SMI
+      MODULE-COMPLIANCE, OBJECT-GROUP,
+      NOTIFICATION-GROUP                FROM SNMPv2-CONF
+      TEXTUAL-CONVENTION                FROM SNMPv2-TC
+      PerfCurrentCount,
+      PerfIntervalCount                 FROM PerfHist-TC-MIB
+      AdslPerfCurrDayCount,
+      AdslPerfPrevDayCount              FROM ADSL-TC-MIB
+      SnmpAdminString                   FROM SNMP-FRAMEWORK-MIB
+      adslLineAlarmConfProfileEntry,
+      adslLineConfProfileEntry,
+      adslAturIntervalEntry,
+      adslAturPerfDataEntry,
+      adslAtucIntervalEntry,
+      adslAtucPerfDataEntry,
+      adslLineEntry,
+      adslMIB                           FROM ADSL-LINE-MIB
+      ;
+
+   adslExtMIB MODULE-IDENTITY
+
+   LAST-UPDATED "200212100000Z"  -- 10 Dec 2002
+
+   ORGANIZATION "IETF ADSL MIB Working Group"
+
+   CONTACT-INFO
+         "
+          Faye Ly
+          Pedestal Networks
+          6503 Dumbarton Circle,
+          Fremont, CA 94555
+          Tel: +1 510-578-0158
+          Fax: +1 510-744-5152
+          E-Mail: faye@pedestalnetworks.com
+
+          Gregory Bathrick
+          Nokia Networks
+          2235 Mercury Way,
+          Fax: +1 707-535-7300
+          E-Mail: greg.bathrick@nokia.com
+
+          General Discussion:adslmib@ietf.org
+          To Subscribe: https://www1.ietf.org/mailman/listinfo/adslmib
+          Archive: https://www1.ietf.org/mailman/listinfo/adslmib
+          "
+   DESCRIPTION
+           "Copyright (C) The Internet Society (2002). This version of
+           this MIB module is part of RFC 3440; see the RFC itself for
+           full legal notices.
+
+           This MIB Module is a supplement to the ADSL-LINE-MIB
+           [RFC2662]."
+
+   REVISION     "200212100000Z"  -- 10 dec 2002
+   DESCRIPTION  "Initial Version, published as RFC 3440. This MIB
+                 module supplements the ADSL-LINE-MIB [RFC2662]."
+          ::= { adslMIB 3 }
+
+       adslExtMibObjects  OBJECT IDENTIFIER ::= { adslExtMIB 1 }
+
+       AdslTransmissionModeType ::= TEXTUAL-CONVENTION
+           STATUS       current
+           DESCRIPTION
+               "A set of ADSL line transmission modes, with one bit
+                per mode.  The notes (F) and (L) denote Full-Rate
+                and G.Lite respectively:
+                  Bit 00 : Regional Std. (ANSI T1.413) (F)
+                  Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
+                  Bit 02 : G.992.1 POTS non-overlapped (F)
+                  Bit 03 : G.992.1 POTS overlapped (F)
+                  Bit 04 : G.992.1 ISDN non-overlapped (F)
+                  Bit 05 : G.992.1 ISDN overlapped (F)
+                  Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
+                  Bit 07 : G.992.1 TCM-ISDN overlapped (F)
+                  Bit 08 : G.992.2 POTS non-overlapped (L)
+                  Bit 09 : G.992.2 POTS overlapped (L)
+                  Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
+                  Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
+                  Bit 12 : G.992.1 TCM-ISDN symmetric (F)
+               "
+           SYNTAX      BITS {
+               ansit1413(0),
+               etsi(1),
+               q9921PotsNonOverlapped(2),
+               q9921PotsOverlapped(3),
+               q9921IsdnNonOverlapped(4),
+               q9921isdnOverlapped(5),
+               q9921tcmIsdnNonOverlapped(6),
+               q9921tcmIsdnOverlapped(7),
+               q9922potsNonOverlapeed(8),
+               q9922potsOverlapped(9),
+               q9922tcmIsdnNonOverlapped(10),
+               q9922tcmIsdnOverlapped(11),
+               q9921tcmIsdnSymmetric(12)
+           }
+
+         adslLineExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslLineExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "This table is an extension of RFC 2662.  It
+                  contains ADSL line configuration and
+                  monitoring information. This includes the ADSL
+                  line's capabilities and actual ADSL transmission
+                  system."
+         ::= { adslExtMibObjects 17 }
+
+         adslLineExtEntry   OBJECT-TYPE
+             SYNTAX          AdslLineExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "An entry extends the adslLineEntry defined in
+                  [RFC2662].  Each entry corresponds to an ADSL
+                  line."
+             AUGMENTS { adslLineEntry }
+         ::= { adslLineExtTable 1 }
+
+         AdslLineExtEntry ::=
+             SEQUENCE {
+             adslLineTransAtucCap        AdslTransmissionModeType,
+             adslLineTransAtucConfig     AdslTransmissionModeType,
+             adslLineTransAtucActual     AdslTransmissionModeType,
+             adslLineGlitePowerState     INTEGER,
+             adslLineConfProfileDualLite SnmpAdminString
+             }
+
+         adslLineTransAtucCap OBJECT-TYPE
+             SYNTAX      AdslTransmissionModeType
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The transmission modes, represented by a
+                  bitmask that the ATU-C is capable of
+                  supporting.  The modes available are limited
+                  by the design of the equipment."
+             REFERENCE "Section 7.3.2 ITU G.997.1"
+         ::= { adslLineExtEntry 1 }
+
+         adslLineTransAtucConfig OBJECT-TYPE
+             SYNTAX      AdslTransmissionModeType
+             MAX-ACCESS  read-write
+             STATUS      current
+             DESCRIPTION
+                 "The transmission modes, represented by a bitmask,
+                  currently enabled by the ATU-C.  The manager can
+                  only set those modes that are supported by the
+
+                  ATU-C.  An ATU-C's supported modes are provided by
+                  AdslLineTransAtucCap."
+             REFERENCE "Section 7.3.2 ITU G.997.1"
+         ::= { adslLineExtEntry 2 }
+
+         adslLineTransAtucActual OBJECT-TYPE
+             SYNTAX      AdslTransmissionModeType
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The actual transmission mode of the ATU-C.
+                  During ADSL line initialization, the ADSL
+                  Transceiver Unit - Remote terminal end (ATU-R)
+                  will determine the mode used for the link.
+                  This value will be limited a single transmission
+                  mode that is a subset of those modes enabled
+                  by the ATU-C and denoted by
+                  adslLineTransAtucConfig. After an initialization
+                  has occurred, its mode is saved as the 'Current'
+                  mode and is persistence should the link go
+                  down. This object returns 0 (i.e. BITS with no
+                  mode bit set) if the mode is not known."
+             REFERENCE "Section 7.3.2 ITU G.997.1 "
+         ::= { adslLineExtEntry 3 }
+
+         adslLineGlitePowerState OBJECT-TYPE
+             SYNTAX      INTEGER {
+                         none(1),
+                         l0(2),          -- L0 Power on
+                         l1(3),          -- L1 Power on but reduced
+                         l3(4)           -- L3 Power off
+                         }
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object specifies the power
+                  state of this interface.  L0 is power on, L1 is
+                  power on but reduced and L3 is power off.  Power
+                  state cannot be configured by an operator but it
+                  can be viewed via the ifOperStatus object for the
+                  managed ADSL interface.  The value of the object
+                  ifOperStatus is set to down(2) if the ADSL
+                  interface is in power state L3 and is set to up(1)
+                  if the ADSL line interface is in power state L0 or
+                  L1. If the object adslLineTransAtucActual is set to
+                  a G.992.2 (G.Lite)-type transmission mode, the
+                  value of this object will be one of the valid power
+                  states: L0(2), L1(3), or L3(4).  Otherwise, its
+
+                  value will be none(1)."
+         ::= { adslLineExtEntry 4 }
+
+         adslLineConfProfileDualLite OBJECT-TYPE
+             SYNTAX SnmpAdminString
+             MAX-ACCESS  read-write
+             STATUS current
+             DESCRIPTION
+                 "This object extends the definition an ADSL line and
+                  associated channels (when applicable) for cases
+                  when it is configured in dual mode, and operating
+                  in a G.Lite-type mode as denoted by
+                  adslLineTransAtucActual.  Dual mode exists when the
+                  object, adslLineTransAtucConfig, is configured with
+                  one or more full-rate modes and one or more G.Lite
+                  modes simultaneously.
+
+                  When 'dynamic' profiles are implemented, the value
+                  of object is equal to the index of the applicable
+                  row in the ADSL Line Configuration Profile Table,
+                  AdslLineConfProfileTable defined in ADSL-MIB
+                  [RFC2662].
+
+                  In the case when dual-mode has not been enabled,
+                  the value of the object will be equal to the value
+                  of the object adslLineConfProfile [RFC2662].
+
+                  When `static' profiles are implemented, in much
+                  like the case of the object,
+                  adslLineConfProfileName [RFC2662], this object's
+                  value will need to algorithmically represent the
+                  characteristics of the line.  In this case, the
+                  value of the line's ifIndex plus a value indicating
+                  the line mode type (e.g., G.Lite, Full-rate) will
+                  be used. Therefore, the profile's name is a string
+                  concatenating the ifIndex and one of the follow
+                  values: Full or Lite. This string will be
+                  fixed-length (i.e., 14) with leading zero(s).  For
+                  example, the profile name for ifIndex that equals
+                  '15' and is a full rate line, it will be
+                  '0000000015Full'."
+             REFERENCE "Section 5.4 Profiles, RFC 2662"
+         ::= { adslLineExtEntry 5 }
+
+         adslAtucPerfDataExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslAtucPerfDataExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "This table extends adslAtucPerfDataTable [RFC2662]
+                  with additional ADSL physical line counter
+                  information such as unavailable seconds-line and
+                  severely errored seconds-line."
+         ::= { adslExtMibObjects 18 }
+
+         adslAtucPerfDataExtEntry   OBJECT-TYPE
+             SYNTAX          AdslAtucPerfDataExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "An entry extends the adslAtucPerfDataEntry defined
+                  in [RFC2662].  Each entry corresponds to an ADSL
+                  line."
+         AUGMENTS { adslAtucPerfDataEntry }
+         ::= { adslAtucPerfDataExtTable 1 }
+
+         AdslAtucPerfDataExtEntry ::=
+             SEQUENCE {
+             adslAtucPerfStatFastR            Counter32,
+             adslAtucPerfStatFailedFastR      Counter32,
+             adslAtucPerfStatSesL             Counter32,
+             adslAtucPerfStatUasL             Counter32,
+             adslAtucPerfCurr15MinFastR       PerfCurrentCount,
+             adslAtucPerfCurr15MinFailedFastR PerfCurrentCount,
+             adslAtucPerfCurr15MinSesL        PerfCurrentCount,
+             adslAtucPerfCurr15MinUasL        PerfCurrentCount,
+             adslAtucPerfCurr1DayFastR        AdslPerfCurrDayCount,
+             adslAtucPerfCurr1DayFailedFastR  AdslPerfCurrDayCount,
+             adslAtucPerfCurr1DaySesL         AdslPerfCurrDayCount,
+             adslAtucPerfCurr1DayUasL         AdslPerfCurrDayCount,
+             adslAtucPerfPrev1DayFastR        AdslPerfPrevDayCount,
+             adslAtucPerfPrev1DayFailedFastR  AdslPerfPrevDayCount,
+             adslAtucPerfPrev1DaySesL         AdslPerfPrevDayCount,
+             adslAtucPerfPrev1DayUasL         AdslPerfPrevDayCount
+         }
+
+         adslAtucPerfStatFastR OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "line retrains"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object reports the count of
+                  the number of fast line bs since last
+                  agent reset."
+             REFERENCE "ITU G.997.1 Section 7.4.15.1 "
+         ::= { adslAtucPerfDataExtEntry 1 }
+
+         adslAtucPerfStatFailedFastR OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "line retrains"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object reports the count of
+                  the number of failed fast line retrains since
+                  last agent reset."
+             REFERENCE "ITU G.997.1 Section 7.4.15.2 "
+         ::= { adslAtucPerfDataExtEntry 2 }
+
+         adslAtucPerfStatSesL OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object reports the count of
+                  the number of severely errored seconds-line since
+                  last agent reset."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
+         ::= { adslAtucPerfDataExtEntry 3 }
+
+         adslAtucPerfStatUasL OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object reports the count of
+                  the number of unavailable seconds-line since
+                  last agent reset."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
+         ::= { adslAtucPerfDataExtEntry 4 }
+
+         adslAtucPerfCurr15MinFastR OBJECT-TYPE
+             SYNTAX      PerfCurrentCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current 15-minute interval,
+                  adslAtucPerfCurr15MinFastR reports the current
+                  number of seconds during which there have been
+
+                  fast retrains."
+             REFERENCE "ITU G.997.1 Section 7.4.15.1 "
+         ::= { adslAtucPerfDataExtEntry 5 }
+
+         adslAtucPerfCurr15MinFailedFastR   OBJECT-TYPE
+             SYNTAX      PerfCurrentCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current 15-minute interval,
+                  adslAtucPerfCurr15MinFailedFastR reports the
+                  current number of seconds during which there
+                  have been failed fast retrains."
+             REFERENCE "ITU G.997.1 Section 7.4.15.2 "
+         ::= { adslAtucPerfDataExtEntry 6 }
+
+         adslAtucPerfCurr15MinSesL OBJECT-TYPE
+             SYNTAX      PerfCurrentCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current 15-minute interval,
+                  adslAtucPerfCurr15MinSesL reports the current
+                  number of seconds during which there have been
+                  severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
+         ::= { adslAtucPerfDataExtEntry 7 }
+
+         adslAtucPerfCurr15MinUasL   OBJECT-TYPE
+             SYNTAX      PerfCurrentCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current 15-minute interval,
+                  adslAtucPerfCurr15MinUasL reports the current
+                  number of seconds during which there have been
+                  unavailable seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
+         ::= { adslAtucPerfDataExtEntry 8 }
+
+         adslAtucPerfCurr1DayFastR    OBJECT-TYPE
+             SYNTAX      AdslPerfCurrDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current day as measured by
+                  adslAtucPerfCurr1DayTimeElapsed [RFC2662],
+                  adslAtucPerfCurr1DayFastR reports the number
+                  of seconds during which there have been
+                  fast retrains."
+             REFERENCE "ITU G.997.1 Section 7.4.15.1 "
+         ::= { adslAtucPerfDataExtEntry 9 }
+
+         adslAtucPerfCurr1DayFailedFastR    OBJECT-TYPE
+             SYNTAX      AdslPerfCurrDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current day as measured by
+                  adslAtucPerfCurr1DayTimeElapsed [RFC2662],
+                  adslAtucPerfCurr1DayFailedFastR reports the
+                  number of seconds during which there have been
+                  failed fast retrains."
+             REFERENCE "ITU G.997.1 Section 7.4.15.2 "
+         ::= { adslAtucPerfDataExtEntry 10 }
+
+         adslAtucPerfCurr1DaySesL    OBJECT-TYPE
+             SYNTAX      AdslPerfCurrDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current day as measured by
+                  adslAtucPerfCurr1DayTimeElapsed [RFC2662],
+                  adslAtucPerfCurr1DaySesL reports the
+                  number of seconds during which there have been
+                  severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
+         ::= { adslAtucPerfDataExtEntry 11 }
+
+         adslAtucPerfCurr1DayUasL    OBJECT-TYPE
+             SYNTAX      AdslPerfCurrDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current day as measured by
+                  adslAtucPerfCurr1DayTimeElapsed [RFC2662],
+                  adslAtucPerfCurr1DayUasL reports the
+                  number of seconds during which there have been
+                  unavailable seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
+         ::= { adslAtucPerfDataExtEntry 12 }
+
+         adslAtucPerfPrev1DayFastR     OBJECT-TYPE
+             SYNTAX      AdslPerfPrevDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the previous day, adslAtucPerfPrev1DayFastR
+                  reports the number of seconds during which there
+                  were fast retrains."
+             REFERENCE "ITU G.997.1 Section 7.4.15.1 "
+         ::= { adslAtucPerfDataExtEntry 13 }
+
+         adslAtucPerfPrev1DayFailedFastR OBJECT-TYPE
+             SYNTAX      AdslPerfPrevDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the previous day,
+                  adslAtucPerfPrev1DayFailedFastR reports the number
+                  of seconds during which there were failed fast
+                  retrains."
+             REFERENCE "ITU G.997.1 Section 7.4.15.2 "
+         ::= { adslAtucPerfDataExtEntry 14 }
+
+         adslAtucPerfPrev1DaySesL     OBJECT-TYPE
+             SYNTAX      AdslPerfPrevDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the previous day, adslAtucPerfPrev1DaySesL
+                  reports the number of seconds during which there
+                  were severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
+         ::= { adslAtucPerfDataExtEntry 15 }
+
+         adslAtucPerfPrev1DayUasL OBJECT-TYPE
+             SYNTAX      AdslPerfPrevDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the previous day, adslAtucPerfPrev1DayUasL
+                  reports the number of seconds during which there
+
+                  were unavailable seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.9 "
+         ::= { adslAtucPerfDataExtEntry 16 }
+
+         adslAtucIntervalExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslAtucIntervalExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "This table provides one row for each ATU-C
+                  performance data collection interval for
+                  ADSL physical interfaces whose
+                  IfEntries' ifType is equal to adsl(94)."
+         ::= { adslExtMibObjects 19 }
+
+         adslAtucIntervalExtEntry   OBJECT-TYPE
+             SYNTAX          AdslAtucIntervalExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION     "An entry in the
+                              adslAtucIntervalExtTable."
+             AUGMENTS        { adslAtucIntervalEntry }
+         ::= { adslAtucIntervalExtTable 1 }
+
+         AdslAtucIntervalExtEntry ::=
+             SEQUENCE {
+             adslAtucIntervalFastR            PerfIntervalCount,
+             adslAtucIntervalFailedFastR      PerfIntervalCount,
+             adslAtucIntervalSesL             PerfIntervalCount,
+             adslAtucIntervalUasL             PerfIntervalCount
+             }
+
+         adslAtucIntervalFastR OBJECT-TYPE
+             SYNTAX      PerfIntervalCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current interval, adslAtucIntervalFastR
+                  reports the current number of seconds during which
+                  there have been fast retrains."
+         ::= { adslAtucIntervalExtEntry 1 }
+
+         adslAtucIntervalFailedFastR OBJECT-TYPE
+             SYNTAX      PerfIntervalCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the each interval, adslAtucIntervalFailedFastR
+                  reports the number of seconds during which
+                  there have been failed fast retrains."
+         ::= { adslAtucIntervalExtEntry 2 }
+
+         adslAtucIntervalSesL OBJECT-TYPE
+             SYNTAX      PerfIntervalCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the each interval, adslAtucIntervalSesL
+                  reports the number of seconds during which
+                  there have been severely errored seconds-line."
+         ::= { adslAtucIntervalExtEntry 3 }
+
+         adslAtucIntervalUasL OBJECT-TYPE
+             SYNTAX      PerfIntervalCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the each interval, adslAtucIntervalUasL
+                  reports the number of seconds during which
+                  there have been unavailable seconds-line."
+         ::= { adslAtucIntervalExtEntry 4 }
+
+         adslAturPerfDataExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslAturPerfDataExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "This table contains ADSL physical line counters
+                  not defined in the adslAturPerfDataTable
+                  from the ADSL-LINE-MIB [RFC2662]."
+         ::= { adslExtMibObjects 20 }
+
+         adslAturPerfDataExtEntry   OBJECT-TYPE
+             SYNTAX          AdslAturPerfDataExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "An entry extends the adslAturPerfDataEntry defined
+                  in [RFC2662].  Each entry corresponds to an ADSL
+                  line."
+             AUGMENTS { adslAturPerfDataEntry }
+         ::= { adslAturPerfDataExtTable 1 }
+
+         AdslAturPerfDataExtEntry ::=
+             SEQUENCE {
+             adslAturPerfStatSesL             Counter32,
+             adslAturPerfStatUasL             Counter32,
+             adslAturPerfCurr15MinSesL        PerfCurrentCount,
+             adslAturPerfCurr15MinUasL        PerfCurrentCount,
+             adslAturPerfCurr1DaySesL         AdslPerfCurrDayCount,
+             adslAturPerfCurr1DayUasL         AdslPerfCurrDayCount,
+             adslAturPerfPrev1DaySesL         AdslPerfPrevDayCount,
+             adslAturPerfPrev1DayUasL         AdslPerfPrevDayCount
+         }
+
+         adslAturPerfStatSesL OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object reports the count of
+                  severely errored second-line since the last agent
+                  reset."
+             REFERENCE "ITU G.997.1 Section 7.2.1.1.7 "
+         ::= { adslAturPerfDataExtEntry 1 }
+
+         adslAturPerfStatUasL OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "The value of this object reports the count of
+                  unavailable seconds-line since the last agent
+                  reset."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
+         ::= { adslAturPerfDataExtEntry 2 }
+
+         adslAturPerfCurr15MinSesL OBJECT-TYPE
+             SYNTAX      PerfCurrentCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current 15-minute interval,
+                  adslAturPerfCurr15MinSesL reports the current
+                  number of seconds during which there have been
+                  severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.7 "
+         ::= { adslAturPerfDataExtEntry 3 }
+
+         adslAturPerfCurr15MinUasL   OBJECT-TYPE
+             SYNTAX      PerfCurrentCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current 15-minute interval,
+                  adslAturPerfCurr15MinUasL reports the current
+                  number of seconds during which there have been
+                  available seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
+         ::= { adslAturPerfDataExtEntry 4 }
+
+         adslAturPerfCurr1DaySesL    OBJECT-TYPE
+             SYNTAX      AdslPerfCurrDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current day as measured by
+                  adslAturPerfCurr1DayTimeElapsed [RFC2662],
+                  adslAturPerfCurr1DaySesL reports the
+                  number of seconds during which there have been
+                  severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.7 "
+         ::= { adslAturPerfDataExtEntry 5 }
+
+         adslAturPerfCurr1DayUasL    OBJECT-TYPE
+             SYNTAX      AdslPerfCurrDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the current day as measured by
+                  adslAturPerfCurr1DayTimeElapsed [RFC2662],
+                  adslAturPerfCurr1DayUasL reports the
+                  number of seconds during which there have been
+                  unavailable seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
+         ::= { adslAturPerfDataExtEntry 6 }
+
+         adslAturPerfPrev1DaySesL     OBJECT-TYPE
+             SYNTAX      AdslPerfPrevDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the previous day, adslAturPerfPrev1DaySesL
+                  reports the number of seconds during which there
+                  were severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.7 "
+         ::= { adslAturPerfDataExtEntry 7 }
+
+         adslAturPerfPrev1DayUasL OBJECT-TYPE
+             SYNTAX      AdslPerfPrevDayCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the previous day, adslAturPerfPrev1DayUasL
+                  reports the number of seconds during which there
+                  were severely errored seconds-line."
+             REFERENCE "ITU G.997.1 Section 7.2.1.2.9 "
+         ::= { adslAturPerfDataExtEntry 8 }
+
+         adslAturIntervalExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslAturIntervalExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "This table provides one row for each ATU-R
+                  performance data collection interval for
+                  ADSL physical interfaces whose
+                  IfEntries' ifType is equal to adsl(94)."
+         ::= { adslExtMibObjects 21 }
+
+         adslAturIntervalExtEntry   OBJECT-TYPE
+             SYNTAX          AdslAturIntervalExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION     "An entry in the
+                              adslAturIntervalExtTable."
+             AUGMENTS        { adslAturIntervalEntry }
+         ::= { adslAturIntervalExtTable 1 }
+
+         AdslAturIntervalExtEntry ::=
+             SEQUENCE {
+             adslAturIntervalSesL             PerfIntervalCount,
+             adslAturIntervalUasL             PerfIntervalCount
+             }
+
+         adslAturIntervalSesL OBJECT-TYPE
+             SYNTAX      PerfIntervalCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the each interval, adslAturIntervalSesL
+                  reports the number of seconds during which
+                  there have been severely errored seconds-line."
+         ::= { adslAturIntervalExtEntry 1 }
+
+         adslAturIntervalUasL OBJECT-TYPE
+             SYNTAX      PerfIntervalCount
+             UNITS       "seconds"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                 "For the each interval, adslAturIntervalUasL
+                  reports the number of seconds during which
+                  there have been unavailable seconds-line."
+         ::= { adslAturIntervalExtEntry 2 }
+
+         adslConfProfileExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslConfProfileExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "The adslConfProfileExtTable extends the ADSL line
+                  profile configuration information in the
+                  adslLineConfProfileTable from the ADSL-LINE-MIB
+                  [RFC2662] by adding the ability to configure the
+                  ADSL physical line mode."
+         ::= { adslExtMibObjects 22 }
+
+         adslConfProfileExtEntry   OBJECT-TYPE
+             SYNTAX          AdslConfProfileExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "An entry extends the adslLineConfProfileEntry
+                  defined in [RFC2662].  Each entry corresponds to an
+                  ADSL line profile."
+             AUGMENTS { adslLineConfProfileEntry }
+         ::= { adslConfProfileExtTable 1 }
+
+         AdslConfProfileExtEntry ::=
+             SEQUENCE {
+                 adslConfProfileLineType  INTEGER
+             }
+
+         adslConfProfileLineType OBJECT-TYPE
+             SYNTAX      INTEGER {
+                 noChannel (1),        -- no channels exist
+                 fastOnly (2),         -- only fast channel exists
+                 interleavedOnly (3),  -- only interleaved channel
+                                       -- exist
+                 fastOrInterleaved (4),-- either fast or interleaved
+                                       -- channels can exist, but
+                                       -- only one at any time
+                 fastAndInterleaved (5)-- both the fast channel and
+                                       -- the interleaved channel
+                                       -- exist
+                 }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                 "This object is used to configure the ADSL physical
+                  line mode.  It has following valid values:
+
+                  noChannel(1), when no channels exist.
+                  fastOnly(2), when only fast channel exists.
+                  interleavedOnly(3), when only interleaved channel
+                      exist.
+                  fastOrInterleaved(4), when either fast or
+                      interleaved channels can exist, but only one
+                      at any time.
+                  fastAndInterleaved(5), when both the fast channel
+                      and the interleaved channel exist.
+
+                  In the case when no value has been set, the default
+                  Value is noChannel(1).
+                  "
+             DEFVAL { fastOnly }
+         ::= { adslConfProfileExtEntry 1 }
+
+         adslAlarmConfProfileExtTable   OBJECT-TYPE
+             SYNTAX          SEQUENCE OF AdslAlarmConfProfileExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "This table extends the
+                  adslLineAlarmConfProfileTable and provides
+                  threshold parameters for all the counters defined
+                  in this MIB module."
+         ::= { adslExtMibObjects 23 }
+
+         adslAlarmConfProfileExtEntry   OBJECT-TYPE
+             SYNTAX          AdslAlarmConfProfileExtEntry
+             MAX-ACCESS      not-accessible
+             STATUS          current
+             DESCRIPTION
+                 "An entry extends the adslLineAlarmConfProfileTable
+                  defined in [RFC2662].  Each entry corresponds to
+                  an ADSL alarm profile."
+             AUGMENTS { adslLineAlarmConfProfileEntry }
+         ::= { adslAlarmConfProfileExtTable 1 }
+
+         AdslAlarmConfProfileExtEntry ::=
+             SEQUENCE {
+             adslAtucThreshold15MinFailedFastR     Integer32,
+             adslAtucThreshold15MinSesL            Integer32,
+             adslAtucThreshold15MinUasL            Integer32,
+             adslAturThreshold15MinSesL            Integer32,
+             adslAturThreshold15MinUasL            Integer32
+         }
+
+         adslAtucThreshold15MinFailedFastR   OBJECT-TYPE
+             SYNTAX      Integer32(0..900)
+             UNITS       "seconds"
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                 "The first time the value of the corresponding
+                  instance of adslAtucPerfCurr15MinFailedFastR
+                  reaches or exceeds this value within a given
+                  15-minute performance data collection period,
+                  an adslAtucFailedFastRThreshTrap  notification
+                  will be generated. The value '0' will disable
+                  the notification. The default value of this
+                  object is '0'."
+             DEFVAL { 0 }
+         ::= { adslAlarmConfProfileExtEntry 1 }
+
+         adslAtucThreshold15MinSesL OBJECT-TYPE
+             SYNTAX      Integer32(0..900)
+             UNITS       "seconds"
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                 "The first time the value of the corresponding
+                  instance of adslAtucPerf15MinSesL reaches or
+                  exceeds this value within a given 15-minute
+                  performance data collection period, an
+                  adslAtucSesLThreshTrap notification will be
+                  generated. The value '0' will disable the
+                  notification.  The default value of this
+                  object is '0'."
+             DEFVAL { 0 }
+         ::= { adslAlarmConfProfileExtEntry 2 }
+
+         adslAtucThreshold15MinUasL OBJECT-TYPE
+             SYNTAX      Integer32(0..900)
+             UNITS       "seconds"
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                 "The first time the value of the corresponding
+                  instance of adslAtucPerf15MinUasL reaches or
+                  exceeds this value within a given 15-minute
+                  performance data collection period, an
+                  adslAtucUasLThreshTrap notification will be
+                  generated. The value '0' will disable the
+                  notification.  The default value of this
+                  object is '0'."
+             DEFVAL { 0 }
+         ::= { adslAlarmConfProfileExtEntry 3 }
+
+         adslAturThreshold15MinSesL OBJECT-TYPE
+             SYNTAX      Integer32(0..900)
+             UNITS       "seconds"
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                 "The first time the value of the corresponding
+                  instance of adslAturPerf15MinSesL reaches or
+                  exceeds this value within a given 15-minute
+                  performance data collection period, an
+                  adslAturSesLThreshTrap notification will be
+                  generated. The value '0' will disable the
+                  notification.  The default value of this
+                  object is '0'."
+             DEFVAL { 0 }
+         ::= { adslAlarmConfProfileExtEntry 4 }
+
+         adslAturThreshold15MinUasL OBJECT-TYPE
+             SYNTAX      Integer32(0..900)
+             UNITS       "seconds"
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                 "The first time the value of the corresponding
+                  instance of adslAturPerf15MinUasL reaches or
+                  exceeds this value within a given 15-minute
+                  performance data collection period, an
+
+                  adslAturUasLThreshTrap notification will be
+                  generated. The value '0' will disable the
+                  notification.  The default value of this
+                  object is '0'."
+             DEFVAL { 0 }
+         ::= { adslAlarmConfProfileExtEntry 5 }
+
+  --   definitions
+
+   adslExtTraps OBJECT IDENTIFIER ::= { adslExtMibObjects 24 }
+
+   adslExtAtucTraps OBJECT IDENTIFIER ::= { adslExtTraps 1 }
+
+   adslExtAtucTrapsPrefix OBJECT IDENTIFIER ::= { adslExtAtucTraps 0 }
+
+         adslAtucFailedFastRThreshTrap      NOTIFICATION-TYPE
+             OBJECTS { adslAtucPerfCurr15MinFailedFastR }
+             STATUS  current
+             DESCRIPTION
+                 "Failed Fast Retrains 15-minute threshold reached."
+         ::= { adslExtAtucTrapsPrefix 1 }
+
+         adslAtucSesLThreshTrap      NOTIFICATION-TYPE
+             OBJECTS { adslAtucPerfCurr15MinSesL }
+             STATUS  current
+             DESCRIPTION
+                 "Severely errored seconds-line 15-minute threshold
+                  reached."
+         ::= { adslExtAtucTrapsPrefix 2 }
+
+         adslAtucUasLThreshTrap      NOTIFICATION-TYPE
+             OBJECTS { adslAtucPerfCurr15MinUasL }
+             STATUS  current
+             DESCRIPTION
+                 "Unavailable seconds-line 15-minute threshold
+                  reached."
+         ::= { adslExtAtucTrapsPrefix 3 }
+
+   adslExtAturTraps OBJECT IDENTIFIER ::= { adslExtTraps 2 }
+
+   adslExtAturTrapsPrefix OBJECT IDENTIFIER ::= { adslExtAturTraps 0 }
+
+         adslAturSesLThreshTrap      NOTIFICATION-TYPE
+             OBJECTS { adslAturPerfCurr15MinSesL }
+             STATUS  current
+             DESCRIPTION
+                 "Severely errored seconds-line 15-minute threshold
+                  reached."
+         ::= { adslExtAturTrapsPrefix 1 }
+
+         adslAturUasLThreshTrap      NOTIFICATION-TYPE
+             OBJECTS { adslAturPerfCurr15MinUasL }
+             STATUS  current
+             DESCRIPTION
+                 "Unavailable seconds-line 15-minute threshold
+                  reached."
+         ::= { adslExtAturTrapsPrefix 2 }
+
+   -- conformance information
+
+   adslExtConformance OBJECT IDENTIFIER ::= { adslExtMIB 2 }
+
+   adslExtGroups OBJECT IDENTIFIER ::= { adslExtConformance 1 }
+   adslExtCompliances OBJECT IDENTIFIER ::= { adslExtConformance 2 }
+
+         -- ATU-C agent compliance statements
+
+         adslExtLineMibAtucCompliance MODULE-COMPLIANCE
+             STATUS  current
+             DESCRIPTION
+                 "The compliance statement for SNMP entities which
+                  represent ADSL ATU-C interfaces."
+
+             MODULE  -- this module
+             MANDATORY-GROUPS
+                {
+                adslExtLineGroup,
+                adslExtLineConfProfileControlGroup,
+                adslExtLineAlarmConfProfileGroup
+                }
+
+             GROUP       adslExtAtucPhysPerfCounterGroup
+             DESCRIPTION
+                 "This group is optional.  Implementations which
+                  require continuous ATU-C physical event counters
+                  should implement this group."
+
+             GROUP       adslExtAturPhysPerfCounterGroup
+             DESCRIPTION
+                 "This group is optional.  Implementations which
+                  require continuous ATU-R physical event counters
+                  should implement this group."
+
+             GROUP   adslExtNotificationsGroup
+             DESCRIPTION
+           "This group is optional.  Implementations which
+                  support TCA (Threshold Crossing Alert) should
+                  implement this group."
+
+             OBJECT      adslAtucThreshold15MinFailedFastR
+             MIN-ACCESS  read-write
+             DESCRIPTION
+                 "Read-write access is applicable only when
+                  static profiles as defined in ADSL Line MIB
+                  [RFC2662] are implemented."
+
+             OBJECT      adslAtucThreshold15MinSesL
+             MIN-ACCESS  read-write
+             DESCRIPTION
+                 "Read-write access is applicable only when
+                  static profiles as defined in ADSL Line MIB
+                  [RFC2662] are implemented."
+
+             OBJECT      adslAtucThreshold15MinUasL
+             MIN-ACCESS  read-write
+             DESCRIPTION
+                 "Read-write access is applicable only when
+                  static profiles as defined in ADSL Line MIB
+                  [RFC2662] are implemented."
+
+             OBJECT      adslAturThreshold15MinSesL
+             MIN-ACCESS  read-write
+             DESCRIPTION
+                 "Read-write access is applicable only when
+                  static profiles as defined in ADSL Line MIB
+                  [RFC2662] are implemented."
+
+             OBJECT      adslAturThreshold15MinUasL
+             MIN-ACCESS  read-write
+             DESCRIPTION
+                 "Read-write access is applicable only when
+                  static profiles as defined in ADSL Line MIB
+                  [RFC2662] are implemented."
+
+             OBJECT      adslLineConfProfileDualLite
+             MIN-ACCESS  read-only
+             DESCRIPTION
+                 "Read-only access is applicable only when
+                  static profiles as defined in ADSL Line MIB
+                  [RFC2662] are implemented."
+         ::= { adslExtCompliances 1 }
+
+         -- units of conformance
+         adslExtLineGroup    OBJECT-GROUP
+             OBJECTS {
+                 adslLineConfProfileDualLite,
+                 adslLineTransAtucCap,
+                 adslLineTransAtucConfig,
+                 adslLineTransAtucActual,
+                 adslLineGlitePowerState
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing extended
+                 configuration information about an ADSL Line."
+         ::= { adslExtGroups 1 }
+
+         adslExtAtucPhysPerfCounterGroup OBJECT-GROUP
+             OBJECTS {
+                 adslAtucPerfStatFastR,
+                 adslAtucPerfStatFailedFastR,
+                 adslAtucPerfCurr15MinFastR,
+                 adslAtucPerfCurr15MinFailedFastR,
+                 adslAtucPerfCurr1DayFastR,
+                 adslAtucPerfCurr1DayFailedFastR,
+                 adslAtucPerfPrev1DayFastR,
+                 adslAtucPerfPrev1DayFailedFastR,
+                 adslAtucPerfStatSesL,
+                 adslAtucPerfStatUasL,
+                 adslAtucPerfCurr15MinSesL,
+                 adslAtucPerfCurr15MinUasL,
+                 adslAtucPerfCurr1DaySesL,
+                 adslAtucPerfCurr1DayUasL,
+                 adslAtucPerfPrev1DaySesL,
+                 adslAtucPerfPrev1DayUasL,
+                 adslAtucIntervalFastR,
+                 adslAtucIntervalFailedFastR,
+                 adslAtucIntervalSesL,
+                 adslAtucIntervalUasL
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing raw performance
+                 counts on an ADSL Line (ATU-C end)."
+         ::= { adslExtGroups 2 }
+
+         adslExtAturPhysPerfCounterGroup OBJECT-GROUP
+             OBJECTS {
+
+                 adslAturPerfStatSesL,
+                 adslAturPerfStatUasL,
+                 adslAturPerfCurr15MinSesL,
+                 adslAturPerfCurr15MinUasL,
+                 adslAturPerfCurr1DaySesL,
+                 adslAturPerfCurr1DayUasL,
+                 adslAturPerfPrev1DaySesL,
+                 adslAturPerfPrev1DayUasL,
+                 adslAturIntervalSesL, adslAturIntervalUasL
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing raw performance
+                 counts on an ADSL Line (ATU-C end)."
+         ::= { adslExtGroups 3 }
+
+         adslExtLineConfProfileControlGroup OBJECT-GROUP
+             OBJECTS {
+                 adslConfProfileLineType
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing profile
+                 control for the ADSL system."
+         ::= { adslExtGroups 4 }
+
+         adslExtLineAlarmConfProfileGroup OBJECT-GROUP
+             OBJECTS {
+                    adslAtucThreshold15MinFailedFastR,
+                    adslAtucThreshold15MinSesL,
+                    adslAtucThreshold15MinUasL,
+                    adslAturThreshold15MinSesL,
+                    adslAturThreshold15MinUasL
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing alarm profile
+                 control for the ADSL system."
+         ::= { adslExtGroups 5 }
+
+         adslExtNotificationsGroup NOTIFICATION-GROUP
+             NOTIFICATIONS {
+                 adslAtucFailedFastRThreshTrap,
+                 adslAtucSesLThreshTrap,
+                 adslAtucUasLThreshTrap,
+                 adslAturSesLThreshTrap,
+                 adslAturUasLThreshTrap
+             }
+             STATUS        current
+             DESCRIPTION
+                 "The collection of ADSL extension notifications."
+            ::= { adslExtGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/ADSL-LINE-MIB.mib b/snmp_builder/mibs/ADSL-LINE-MIB.mib
new file mode 100644
index 0000000..34c9f80
--- /dev/null
+++ b/snmp_builder/mibs/ADSL-LINE-MIB.mib
@@ -0,0 +1,4327 @@
+ADSL-LINE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Counter32, Gauge32,
+    NOTIFICATION-TYPE,
+    transmission, Unsigned32          FROM SNMPv2-SMI
+    RowStatus,
+    TruthValue, VariablePointer       FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                FROM SNMPv2-CONF
+    ifIndex                           FROM IF-MIB
+    PerfCurrentCount,
+    PerfIntervalCount                 FROM PerfHist-TC-MIB
+
+    SnmpAdminString                   FROM SNMP-FRAMEWORK-MIB
+    AdslPerfCurrDayCount,
+    AdslPerfPrevDayCount,
+    AdslPerfTimeElapsed,
+    AdslLineCodingType                FROM ADSL-TC-MIB
+    ;
+
+adslMIB MODULE-IDENTITY
+
+LAST-UPDATED "9908190000Z"
+
+ORGANIZATION "IETF ADSL MIB Working Group"
+
+CONTACT-INFO
+    "
+    Gregory Bathrick
+    AG Communication Systems
+    A Subsidiary of Lucent Technologies
+    2500 W Utopia Rd.
+    Phoenix, AZ 85027 USA
+    Tel: +1 602-582-7679
+    Fax: +1 602-582-7697
+    E-mail: bathricg@agcs.com
+
+    Faye Ly
+    Copper Mountain Networks
+    Norcal Office
+    2470 Embarcadero Way
+    Palo Alto, CA 94303
+    Tel: +1 650-858-8500
+    Fax: +1 650-858-8085
+    E-Mail: faye@coppermountain.com
+
+    (ADSL Forum input only)
+    John Burgess
+    Predictive Systems, Inc.
+    25A Vreeland Rd.
+    Florham Park, NJ 07932 USA
+    Tel: +1 973-301-5610
+    Fax: +1 973-301-5699
+    E-mail: jtburgess@predictive.com
+
+    IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
+    "
+DESCRIPTION
+    "The MIB module defining objects for the management of a pair of
+    ADSL modems at each end of the ADSL line.  Each such line has
+
+    an entry in an ifTable which may include multiple modem lines.
+    An agent may reside at either end of the ADSL line however the
+    MIB is designed to require no management communication between
+    them beyond that inherent in the low-level ADSL line protocol.
+    The agent may monitor and control this protocol for its needs.
+
+    ADSL lines may support optional Fast or Interleaved channels.
+    If these are supported, additional entries corresponding to the
+    supported channels must be created in the ifTable. Thus an ADSL
+    line that supports both channels will have three entries in the
+    ifTable, one for each physical, fast, and interleaved, whose
+    ifType values are equal to adsl(94), fast(125), and
+    interleaved(124), respectively. The ifStackTable is used to
+    represent the relationship between the entries.
+
+    Naming Conventions:
+              Atuc -- (ATUC) modem at near (Central) end of line
+              Atur -- (ATUR) modem at Remote end of line
+              Curr -- Current
+              Prev -- Previous
+              Atn -- Attenuation
+              ES  -- Errored Second.
+              LCS -- Line Code Specific
+              Lof -- Loss of Frame
+              Lol -- Loss of Link
+              Los -- Loss of Signal
+              Lpr -- Loss of Power
+              xxxs-- interval of Seconds in which xxx occurs
+                      (e.g., xxx=Lof, Los, Lpr)
+              Max -- Maximum
+              Mgn -- Margin
+              Min -- Minimum
+              Psd -- Power Spectral Density
+              Snr -- Signal to Noise Ratio
+              Tx  -- Transmit
+              Blks-- Blocks, a data unit, see
+                     adslAtuXChanCrcBlockLength
+      "
+      --  Revision history
+      REVISION     "9908190000Z"  -- 19 August 1999, midnight
+      DESCRIPTION  "Initial Version, published as RFC 2662"
+::= { transmission 94 }
+
+adslLineMib OBJECT IDENTIFIER ::= { adslMIB 1 }
+
+adslMibObjects OBJECT IDENTIFIER ::= { adslLineMib 1 }
+
+-- objects
+      adslLineTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslLineEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table includes common attributes describing
+              both ends of the line.  It is required for all ADSL
+              physical interfaces.  ADSL physical interfaces are
+              those ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 1 }
+
+      adslLineEntry   OBJECT-TYPE
+          SYNTAX          AdslLineEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in adslLineTable."
+          INDEX           { ifIndex }
+      ::= { adslLineTable 1 }
+
+      AdslLineEntry ::=
+          SEQUENCE {
+          adslLineCoding           AdslLineCodingType,
+          adslLineType             INTEGER,
+          adslLineSpecific         VariablePointer,
+          adslLineConfProfile      SnmpAdminString,
+          adslLineAlarmConfProfile SnmpAdminString
+          }
+
+      adslLineCoding OBJECT-TYPE
+          SYNTAX      AdslLineCodingType
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Specifies the ADSL coding type used on this
+              line."
+      ::= { adslLineEntry 1 }
+
+     adslLineType OBJECT-TYPE
+          SYNTAX      INTEGER {
+              noChannel (1),        -- no channels exist
+              fastOnly (2),         -- fast channel exists only
+              interleavedOnly (3),  -- interleaved channel exists
+                                    -- only
+              fastOrInterleaved (4),-- either fast or interleaved
+                                    -- channels can exist, but
+                                    -- only one at any time
+              fastAndInterleaved (5)-- both fast or interleaved
+
+                                    -- channels exist
+          }
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Defines the type of ADSL physical line
+              entity that exists, by defining whether and how
+              the line is channelized.  If the line is channelized,
+              the value will be other than noChannel(1).  This
+              object defines which channel type(s) are supported.
+
+              In the case that the line is channelized, the manager
+              can use the ifStackTable to determine the ifIndex for
+              the associated channel(s)."
+      ::= { adslLineEntry 2 }
+
+      adslLineSpecific OBJECT-TYPE
+          SYNTAX      VariablePointer
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "OID instance in vendor-specific MIB. The Instance may
+              be used to determine shelf/slot/port of the ATUC
+              interface in a DSLAM."
+      ::= { adslLineEntry 3 }
+
+     adslLineConfProfile OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (1..32))
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+              "The value of this object identifies the row
+              in the ADSL Line Configuration Profile Table,
+              (adslLineConfProfileTable), which applies for this
+              ADSL line, and channels if applicable.
+
+              For `dynamic' mode, in the case which the
+              configuration profile has not been set, the
+              value will be set to `DEFVAL'.
+
+              If the implementator of this MIB has chosen not
+              to implement `dynamic assignment' of profiles, this
+              object's MIN-ACCESS is read-only."
+      ::= { adslLineEntry 4 }
+
+     adslLineAlarmConfProfile OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (1..32))
+          MAX-ACCESS  read-write
+          STATUS      current
+          DESCRIPTION
+              "The value of this object identifies the row
+              in the ADSL Line Alarm Configuration Profile Table,
+              (adslLineAlarmConfProfileTable), which applies to this
+              ADSL line, and channels if applicable.
+
+              For `dynamic' mode, in the case which the
+              alarm profile has not been set, the
+              value will be set to `DEFVAL'.
+
+              If the implementator of this MIB has chosen not
+              to implement `dynamic assignment' of profiles, this
+              object's MIN-ACCESS is read-only."
+      ::= { adslLineEntry 5 }
+
+      adslAtucPhysTable       OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAtucPhysEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUC.
+              Each row contains the Physical Layer Parameters
+              table for that ATUC. ADSL physical interfaces are
+              those ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 2 }
+
+      adslAtucPhysEntry       OBJECT-TYPE
+          SYNTAX          AdslAtucPhysEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAtucPhysTable."
+          INDEX           { ifIndex }
+      ::= { adslAtucPhysTable 1 }
+
+      AdslAtucPhysEntry ::=
+          SEQUENCE {
+          adslAtucInvSerialNumber         SnmpAdminString,
+          adslAtucInvVendorID             SnmpAdminString,
+          adslAtucInvVersionNumber        SnmpAdminString,
+          adslAtucCurrSnrMgn              INTEGER,
+          adslAtucCurrAtn                 Gauge32,
+          adslAtucCurrStatus              BITS,
+          adslAtucCurrOutputPwr           INTEGER,
+          adslAtucCurrAttainableRate      Gauge32
+          }
+
+      -- inventory group
+
+      --
+      -- These items should describe the lowest level identifiable
+      -- component, be it a stand-alone modem, a card in a rack,
+      -- a child-board, etc.
+      --
+      adslAtucInvSerialNumber OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (0..32))
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The vendor specific string that identifies the
+              vendor equipment."
+      ::= { adslAtucPhysEntry 1 }
+
+      adslAtucInvVendorID OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (0..16))
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The vendor ID code is a copy of the binary
+              vendor identification field defined by the
+              PHY[10] and expressed as readable characters."
+          REFERENCE "ANSI T1.413[10]"
+      ::= { adslAtucPhysEntry 2 }
+
+      adslAtucInvVersionNumber OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (0..16))
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The vendor specific version number sent by this ATU
+              as part of the initialization messages.  It is a copy
+              of the binary version number field defined by the
+              PHY[10] and expressed as readable characters."
+          REFERENCE "ANSI T1.413[10]"
+      ::= { adslAtucPhysEntry 3 }
+
+      -- current status group
+      --
+      adslAtucCurrSnrMgn OBJECT-TYPE
+          SYNTAX      INTEGER (-640..640)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Noise Margin as seen by this ATU with respect to its
+              received signal in tenth dB."
+      ::= { adslAtucPhysEntry 4 }
+
+      adslAtucCurrAtn OBJECT-TYPE
+          SYNTAX      Gauge32(0..630)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Measured difference in the total power transmitted by
+              the peer ATU and the total power received by this ATU."
+      ::= { adslAtucPhysEntry 5 }
+
+     adslAtucCurrStatus OBJECT-TYPE
+          SYNTAX      BITS {
+                            noDefect(0),
+                            lossOfFraming(1),
+                            lossOfSignal(2),
+                            lossOfPower(3),
+                            lossOfSignalQuality(4),
+                            lossOfLink(5),
+                            dataInitFailure(6),
+                            configInitFailure(7),
+                            protocolInitFailure(8),
+                            noPeerAtuPresent(9)
+                           }
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Indicates current state of the ATUC line.  This is a
+              bit-map of possible conditions.  The various bit
+              positions are:
+
+       0      noDefect             There no defects on the line
+
+       1      lossOfFraming        ATUC failure due to not
+                                   receiving valid frame.
+
+       2      lossOfSignal         ATUC failure due to not
+                                   receiving signal.
+
+       3      lossOfPower          ATUC failure due to loss of
+                                   power.
+                                   Note: the Agent may still
+                                   function.
+
+       4      lossOfSignalQuality  Loss of Signal Quality is
+                                   declared when the Noise Margin
+                                   falls below the Minimum Noise
+
+                                   Margin, or the bit-error-rate
+                                   exceeds 10^-7.
+
+       5      lossOfLink           ATUC failure due to inability
+                                   to link with ATUR.
+
+       6      dataInitFailure      ATUC failure during
+                                   initialization due to bit
+                                   errors corrupting startup
+                                   exchange data.
+
+       7      configInitFailure    ATUC failure during
+                                   initialization due to peer
+                                   ATU not able to support
+                                   requested configuration
+
+       8      protocolInitFailure  ATUC failure during
+                                   initialization due to
+                                   incompatible protocol used by
+                                   the peer ATU.
+
+       9      noPeerAtuPresent     ATUC failure during
+                                   initialization due to no
+                                   activation sequence detected
+                                   from peer ATU.
+
+              This is intended to supplement ifOperStatus."
+      ::= { adslAtucPhysEntry 6 }
+
+      adslAtucCurrOutputPwr OBJECT-TYPE
+          SYNTAX      INTEGER (-310..310)
+          UNITS       "tenth dBm"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Measured total output power transmitted by this ATU.
+              This is the measurement that was reported during
+              the last activation sequence."
+      ::= { adslAtucPhysEntry 7 }
+
+      adslAtucCurrAttainableRate OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "bps"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Indicates the maximum currently attainable data rate
+              by the ATU.  This value will be equal or greater than
+
+              the current line rate."
+      ::= { adslAtucPhysEntry 8 }
+
+      adslAturPhysTable        OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAturPhysEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUR
+              Each row contains the Physical Layer Parameters
+              table for that ATUR. ADSL physical interfaces are
+              those ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 3 }
+
+      adslAturPhysEntry       OBJECT-TYPE
+          SYNTAX          AdslAturPhysEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAturPhysTable."
+          INDEX           { ifIndex }
+      ::= { adslAturPhysTable 1 }
+
+      AdslAturPhysEntry ::=
+          SEQUENCE {
+          adslAturInvSerialNumber         SnmpAdminString,
+          adslAturInvVendorID             SnmpAdminString,
+          adslAturInvVersionNumber        SnmpAdminString,
+          adslAturCurrSnrMgn              INTEGER,
+          adslAturCurrAtn                 Gauge32,
+          adslAturCurrStatus              BITS,
+          adslAturCurrOutputPwr           INTEGER,
+          adslAturCurrAttainableRate      Gauge32
+          }
+
+      -- inventory group
+      --
+      adslAturInvSerialNumber OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (0..32))
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The vendor specific string that identifies the
+              vendor equipment."
+      ::= { adslAturPhysEntry 1 }
+
+      adslAturInvVendorID OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (0..16))
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The vendor ID code is a copy of the binary
+              vendor identification field defined by the
+              PHY[10] and expressed as readable characters."
+          REFERENCE "ANSI T1.413"
+      ::= { adslAturPhysEntry 2 }
+
+      adslAturInvVersionNumber OBJECT-TYPE
+          SYNTAX      SnmpAdminString (SIZE (0..16))
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The vendor specific version number sent by this ATU
+              as part of the initialization messages.  It is a copy
+              of the binary version number field defined by the
+              PHY[10] and expressed as readable characters."
+          REFERENCE "ANSI T1.413"
+      ::= { adslAturPhysEntry 3 }
+
+      -- current status group
+      --
+      adslAturCurrSnrMgn OBJECT-TYPE
+          SYNTAX      INTEGER (-640..640)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Noise Margin as seen by this ATU with respect to its
+              received signal in tenth dB."
+      ::= { adslAturPhysEntry 4 }
+
+      adslAturCurrAtn OBJECT-TYPE
+          SYNTAX      Gauge32(0..630)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Measured difference in the total power transmitted by
+              the peer ATU and the total power received by this ATU."
+      ::= { adslAturPhysEntry 5 }
+
+     adslAturCurrStatus OBJECT-TYPE
+          SYNTAX     BITS {
+                           noDefect(0),
+                           lossOfFraming(1),
+                           lossOfSignal(2),
+                           lossOfPower(3),
+                           lossOfSignalQuality(4)
+                          }
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Indicates current state of the ATUR line.  This is a
+              bit-map of possible conditions.  Due to the isolation
+              of the ATUR when line problems occur, many state
+              conditions like loss of power, loss of quality signal,
+              and initialization errors,  can not be determined.
+              While trouble shooting ATUR, also use object,
+              adslAtucCurrStatus.  The various bit positions are:
+
+       0      noDefect             There no defects on the line
+
+       1      lossOfFraming        ATUR failure due to not
+                                   receiving valid frame
+
+       2      lossOfSignal         ATUR failure due to not
+                                   receiving signal
+
+       3      lossOfPower          ATUR failure due to loss of
+                                   power
+
+       4      lossOfSignalQuality  Loss of Signal Quality is
+                                   declared when the Noise Margin
+                                   falls below the Minimum Noise
+                                   Margin, or the
+                                   bit-error-rate exceeds 10^-7.
+
+              This is intended to supplement ifOperStatus."
+      ::= { adslAturPhysEntry 6 }
+
+      adslAturCurrOutputPwr OBJECT-TYPE
+          SYNTAX      INTEGER (-310..310)
+          UNITS       "tenth dBm"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Measured total output power transmitted by this ATU.
+              This is the measurement that was reported during
+              the last activation sequence."
+      ::= { adslAturPhysEntry 7 }
+
+      adslAturCurrAttainableRate OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "bps"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Indicates the maximum currently attainable data rate
+              by the ATU.  This value will be equal or greater than
+              the current line rate."
+      ::= { adslAturPhysEntry 8 }
+
+      adslAtucChanTable       OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAtucChanEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUC channel.
+              ADSL channel interfaces are those ifEntries
+              where ifType is equal to adslInterleave(124)
+              or adslFast(125)."
+      ::= { adslMibObjects 4 }
+
+      adslAtucChanEntry       OBJECT-TYPE
+          SYNTAX          AdslAtucChanEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAtucChanTable."
+          INDEX           { ifIndex }
+      ::= { adslAtucChanTable 1 }
+
+      AdslAtucChanEntry ::=
+          SEQUENCE {
+          adslAtucChanInterleaveDelay     Gauge32,
+          adslAtucChanCurrTxRate          Gauge32,
+          adslAtucChanPrevTxRate          Gauge32,
+          adslAtucChanCrcBlockLength      Gauge32
+          }
+
+      -- current group
+      --
+      adslAtucChanInterleaveDelay OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "milli-seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Interleave Delay for this channel.
+
+              Interleave delay applies only to the
+              interleave channel and defines the mapping
+              (relative spacing) between subsequent input
+              bytes at the interleaver input and their placement
+
+              in the bit stream at the interleaver output.
+              Larger numbers provide greater separation between
+              consecutive input bytes in the output bit stream
+              allowing for improved impulse noise immunity at
+              the expense of payload latency.
+
+              In the case where the ifType is Fast(125), use
+              noSuchObject."
+      ::= { adslAtucChanEntry 1 }
+
+      adslAtucChanCurrTxRate  OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "bps"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Actual transmit rate on this channel."
+      ::= { adslAtucChanEntry 2 }
+
+      adslAtucChanPrevTxRate OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS        "bps"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The rate at the time of the last
+              adslAtucRateChangeTrap event. It is also set at
+              initialization to prevent a trap being sent.
+
+              Rate changes less than adslAtucThresh(*)RateDown
+              or less than adslAtucThresh(*)RateUp will not
+              cause a trap or cause this object to change.
+              (*) == Fast or Interleave.
+              See AdslLineAlarmConfProfileEntry."
+      ::= { adslAtucChanEntry 3 }
+
+      adslAtucChanCrcBlockLength OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS        "byte"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Indicates the length of the channel data-block
+              on which the CRC operates.  Refer to Line Code
+              Specific MIBs, [11] and [12] for more
+              information."
+      ::= { adslAtucChanEntry 4 }
+
+     adslAturChanTable       OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAturChanEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUR channel.
+              ADSL channel interfaces are those ifEntries
+              where ifType is equal to adslInterleave(124)
+              or adslFast(125)."
+      ::= { adslMibObjects 5 }
+
+      adslAturChanEntry       OBJECT-TYPE
+          SYNTAX          AdslAturChanEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAturChanTable."
+          INDEX           { ifIndex }
+      ::= { adslAturChanTable 1 }
+
+      AdslAturChanEntry ::=
+          SEQUENCE {
+          adslAturChanInterleaveDelay     Gauge32,
+          adslAturChanCurrTxRate          Gauge32,
+          adslAturChanPrevTxRate          Gauge32,
+          adslAturChanCrcBlockLength      Gauge32
+          }
+
+      -- current group
+      --
+      adslAturChanInterleaveDelay OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "milli-seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Interleave Delay for this channel.
+
+              Interleave delay applies only to the
+              interleave channel and defines the mapping
+              (relative spacing) between subsequent input
+              bytes at the interleaver input and their placement
+              in the bit stream at the interleaver output.
+              Larger numbers provide greater separation between
+              consecutive input bytes in the output bit stream
+              allowing for improved impulse noise immunity at
+              the expense of payload latency.
+
+              In the case where the ifType is Fast(125), use
+
+              noSuchObject."
+      ::= { adslAturChanEntry 1 }
+
+      adslAturChanCurrTxRate  OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "bps"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Actual transmit rate on this channel."
+      ::= { adslAturChanEntry 2 }
+
+      adslAturChanPrevTxRate OBJECT-TYPE
+          SYNTAX      Gauge32
+          UNITS       "bps"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+             "The rate at the time of the last
+              adslAturRateChangeTrap event. It is also set at
+              initialization to prevent a trap being sent.
+              Rate changes less than adslAturThresh(*)RateDown
+              or less than adslAturThresh(*)RateUp will not
+              cause a trap or cause this object to change.
+              (*) == Fast or Interleave.
+              See AdslLineAlarmConfProfileEntry."
+      ::= { adslAturChanEntry 3 }
+
+      adslAturChanCrcBlockLength OBJECT-TYPE
+          SYNTAX      Gauge32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Indicates the length of the channel data-block
+              on which the CRC operates.  Refer to Line Code
+              Specific MIBs, [11] and [12] for more
+              information."
+      ::= { adslAturChanEntry 4 }
+
+      adslAtucPerfDataTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAtucPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUC.
+              ADSL physical interfaces are
+              those ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 6 }
+
+      adslAtucPerfDataEntry       OBJECT-TYPE
+          SYNTAX          AdslAtucPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in adslAtucPerfDataTable."
+          INDEX           { ifIndex }
+      ::= { adslAtucPerfDataTable 1 }
+
+      AdslAtucPerfDataEntry ::=
+          SEQUENCE {
+          adslAtucPerfLofs                 Counter32,
+          adslAtucPerfLoss                 Counter32,
+          adslAtucPerfLols                 Counter32,
+          adslAtucPerfLprs                 Counter32,
+          adslAtucPerfESs                  Counter32,
+          adslAtucPerfInits                Counter32,
+          adslAtucPerfValidIntervals       INTEGER,
+          adslAtucPerfInvalidIntervals     INTEGER,
+          adslAtucPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
+          adslAtucPerfCurr15MinLofs        PerfCurrentCount,
+          adslAtucPerfCurr15MinLoss        PerfCurrentCount,
+          adslAtucPerfCurr15MinLols        PerfCurrentCount,
+          adslAtucPerfCurr15MinLprs        PerfCurrentCount,
+          adslAtucPerfCurr15MinESs         PerfCurrentCount,
+          adslAtucPerfCurr15MinInits       PerfCurrentCount,
+          adslAtucPerfCurr1DayTimeElapsed  AdslPerfTimeElapsed,
+          adslAtucPerfCurr1DayLofs         AdslPerfCurrDayCount,
+          adslAtucPerfCurr1DayLoss         AdslPerfCurrDayCount,
+          adslAtucPerfCurr1DayLols         AdslPerfCurrDayCount,
+          adslAtucPerfCurr1DayLprs         AdslPerfCurrDayCount,
+          adslAtucPerfCurr1DayESs          AdslPerfCurrDayCount,
+          adslAtucPerfCurr1DayInits        AdslPerfCurrDayCount,
+          adslAtucPerfPrev1DayMoniSecs     INTEGER,
+          adslAtucPerfPrev1DayLofs         AdslPerfPrevDayCount,
+          adslAtucPerfPrev1DayLoss         AdslPerfPrevDayCount,
+          adslAtucPerfPrev1DayLols         AdslPerfPrevDayCount,
+          adslAtucPerfPrev1DayLprs         AdslPerfPrevDayCount,
+          adslAtucPerfPrev1DayESs          AdslPerfPrevDayCount,
+          adslAtucPerfPrev1DayInits        AdslPerfPrevDayCount
+          }
+
+      -- Event Counters
+      --
+      -- Also see adslAtucIntervalTable for 15 minute interval
+      -- elapsed counters.
+      --
+      adslAtucPerfLofs OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Framing failures since
+              agent reset."
+      ::= { adslAtucPerfDataEntry 1 }
+
+      adslAtucPerfLoss  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Signal failures since
+              agent reset."
+      ::= { adslAtucPerfDataEntry 2 }
+
+      adslAtucPerfLols OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Link failures since
+              agent reset."
+      ::= { adslAtucPerfDataEntry 3 }
+
+      adslAtucPerfLprs OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Power failures since
+              agent reset."
+      ::= { adslAtucPerfDataEntry 4 }
+
+      adslAtucPerfESs OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Errored Seconds since agent
+              reset.  The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAtucPerfDataEntry 5 }
+
+      adslAtucPerfInits OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the line initialization attempts since
+              agent reset. Includes both successful and failed
+              attempts."
+      ::= { adslAtucPerfDataEntry 6 }
+
+      -- general 15 min interval information
+      --
+
+      adslAtucPerfValidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of previous 15-minute intervals in the
+              interval table for which data was collected.  Given
+              that <n> is the maximum # of intervals supported.
+              The value will be <n> unless the measurement was
+              (re-)started within the last (<n>*15) minutes, in which
+              case the value will be the number of complete 15
+              minute intervals for which the agent has at least
+              some data. In certain cases (e.g., in the case
+              where the agent is a proxy) it is possible that some
+              intervals are unavailable.  In this case, this
+              interval is the maximum interval number for
+              which data is available."
+      ::= { adslAtucPerfDataEntry 7 }
+
+      adslAtucPerfInvalidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of intervals in the range from
+              0 to the value of adslAtucPerfValidIntervals
+              for which no data is available. This object
+              will typically be zero except in cases where
+              the data for some intervals are not available
+              (e.g., in proxy situations)."
+      ::= { adslAtucPerfDataEntry 8 }
+
+      -- 15 min current performance group
+      --
+      adslAtucPerfCurr15MinTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..899)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Total elapsed seconds in this interval."
+      ::= { adslAtucPerfDataEntry 9 }
+
+      adslAtucPerfCurr15MinLofs OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Framing."
+      ::= { adslAtucPerfDataEntry 10 }
+
+      adslAtucPerfCurr15MinLoss  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Signal."
+      ::= { adslAtucPerfDataEntry 11 }
+
+      adslAtucPerfCurr15MinLols  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Link."
+      ::= { adslAtucPerfDataEntry 12 }
+
+      adslAtucPerfCurr15MinLprs  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Power."
+      ::= { adslAtucPerfDataEntry 13 }
+
+      adslAtucPerfCurr15MinESs OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds in the current 15 minute
+              interval.  The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAtucPerfDataEntry 14 }
+
+      adslAtucPerfCurr15MinInits  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the line initialization attempts in the
+              current 15 minute interval. Includes both successful
+              and failed attempts."
+      ::= { adslAtucPerfDataEntry 15 }
+
+      -- 1-day current and previous performance group
+      --
+      adslAtucPerfCurr1DayTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..86399)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Number of seconds that have elapsed since the
+              beginning of the current 1-day interval."
+      ::= { adslAtucPerfDataEntry 16 }
+
+      adslAtucPerfCurr1DayLofs  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss of
+              Framing during the current day as measured by
+              adslAtucPerfCurr1DayTimeElapsed."
+      ::= { adslAtucPerfDataEntry 17 }
+
+      adslAtucPerfCurr1DayLoss  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss of
+              Signal during the current day as measured by
+              adslAtucPerfCurr1DayTimeElapsed."
+      ::= { adslAtucPerfDataEntry 18 }
+
+      adslAtucPerfCurr1DayLols  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss of
+              Link during the current day as measured by
+              adslAtucPerfCurr1DayTimeElapsed."
+      ::= { adslAtucPerfDataEntry 19 }
+
+      adslAtucPerfCurr1DayLprs  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss of
+              Power during the current day as measured by
+              adslAtucPerfCurr1DayTimeElapsed."
+      ::= { adslAtucPerfDataEntry 20 }
+
+      adslAtucPerfCurr1DayESs OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds during the current day as
+              measured by adslAtucPerfCurr1DayTimeElapsed.
+              The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAtucPerfDataEntry 21 }
+
+      adslAtucPerfCurr1DayInits  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the line initialization attempts in the
+              day as measured by adslAtucPerfCurr1DayTimeElapsed.
+              Includes both successful and failed attempts."
+      ::= { adslAtucPerfDataEntry 22 }
+
+      adslAtucPerfPrev1DayMoniSecs OBJECT-TYPE
+          SYNTAX      INTEGER(0..86400)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The amount of time in the previous 1-day interval
+              over which the performance monitoring information
+              is actually counted. This value will be the same as
+              the interval duration except in a situation where
+              performance monitoring data could not be collected
+              for any reason."
+      ::= { adslAtucPerfDataEntry 23 }
+
+      adslAtucPerfPrev1DayLofs  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Framing within the most recent previous
+              1-day period."
+      ::= { adslAtucPerfDataEntry 24 }
+
+      adslAtucPerfPrev1DayLoss  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Signal within the most recent previous
+              1-day period."
+      ::= { adslAtucPerfDataEntry 25 }
+
+      adslAtucPerfPrev1DayLols  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Link within the most recent previous
+              1-day period."
+      ::= { adslAtucPerfDataEntry 26 }
+
+      adslAtucPerfPrev1DayLprs  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Power within the most recent previous
+              1-day period."
+      ::= { adslAtucPerfDataEntry 27 }
+
+      adslAtucPerfPrev1DayESs OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds within the most recent
+              previous 1-day period. The errored second parameter is
+              a count of one-second intervals containing one or more
+              crc anomalies, or one or more los or sef defects."
+      ::= { adslAtucPerfDataEntry 28 }
+
+      adslAtucPerfPrev1DayInits  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the line initialization attempts in the most
+              recent previous 1-day period. Includes both successful
+              and failed attempts."
+      ::= { adslAtucPerfDataEntry 29 }
+
+      adslAturPerfDataTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAturPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUR.
+              ADSL physical interfaces are
+              those ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 7 }
+
+      adslAturPerfDataEntry       OBJECT-TYPE
+          SYNTAX          AdslAturPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in adslAturPerfDataTable."
+          INDEX           { ifIndex }
+      ::= { adslAturPerfDataTable 1 }
+
+      AdslAturPerfDataEntry ::=
+          SEQUENCE {
+          adslAturPerfLofs                 Counter32,
+          adslAturPerfLoss                 Counter32,
+          adslAturPerfLprs                 Counter32,
+          adslAturPerfESs                  Counter32,
+          adslAturPerfValidIntervals       INTEGER,
+          adslAturPerfInvalidIntervals     INTEGER,
+          adslAturPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
+          adslAturPerfCurr15MinLofs        PerfCurrentCount,
+          adslAturPerfCurr15MinLoss        PerfCurrentCount,
+          adslAturPerfCurr15MinLprs        PerfCurrentCount,
+          adslAturPerfCurr15MinESs         PerfCurrentCount,
+          adslAturPerfCurr1DayTimeElapsed  AdslPerfTimeElapsed,
+          adslAturPerfCurr1DayLofs         AdslPerfCurrDayCount,
+          adslAturPerfCurr1DayLoss         AdslPerfCurrDayCount,
+          adslAturPerfCurr1DayLprs         AdslPerfCurrDayCount,
+          adslAturPerfCurr1DayESs          AdslPerfCurrDayCount,
+          adslAturPerfPrev1DayMoniSecs     INTEGER,
+          adslAturPerfPrev1DayLofs         AdslPerfPrevDayCount,
+          adslAturPerfPrev1DayLoss         AdslPerfPrevDayCount,
+          adslAturPerfPrev1DayLprs         AdslPerfPrevDayCount,
+          adslAturPerfPrev1DayESs          AdslPerfPrevDayCount
+          }
+
+      -- Event (Raw) Counters
+      --
+      -- Also see adslAturIntervalTable for 15 minute interval
+      -- elapsed counters.
+      --
+      adslAturPerfLofs OBJECT-TYPE
+          SYNTAX      Counter32
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Framing failures since
+              agent reset."
+      ::= { adslAturPerfDataEntry 1 }
+
+      adslAturPerfLoss  OBJECT-TYPE
+          SYNTAX      Counter32
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Signal failures since
+              agent reset."
+      ::= { adslAturPerfDataEntry 2 }
+
+     adslAturPerfLprs  OBJECT-TYPE
+          SYNTAX      Counter32
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Loss of Power failures since
+              agent reset."
+      ::= { adslAturPerfDataEntry 3 }
+
+      adslAturPerfESs  OBJECT-TYPE
+          SYNTAX      Counter32
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of Errored Seconds since agent
+              reset.  The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAturPerfDataEntry 4 }
+
+      -- general 15 min interval information
+      --
+      adslAturPerfValidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of previous 15-minute intervals in the
+              interval table for which data was collected.  Given
+              that <n> is the maximum # of intervals supported.
+              The value will be <n> unless the measurement was
+              (re-)started within the last (<n>*15) minutes, in which
+              case the value will be the number of complete 15
+              minute intervals for which the agent has at least
+              some data. In certain cases (e.g., in the case
+              where the agent is a proxy) it is possible that some
+              intervals are unavailable.  In this case, this
+              interval is the maximum interval number for
+              which data is available."
+      ::= { adslAturPerfDataEntry 5 }
+
+      adslAturPerfInvalidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of intervals in the range from
+              0 to the value of adslAturPerfValidIntervals
+              for which no data is available. This object
+              will typically be zero except in cases where
+              the data for some intervals are not available
+              (e.g., in proxy situations)."
+      ::= { adslAturPerfDataEntry 6 }
+
+      -- 15 min current performance group
+      --
+      adslAturPerfCurr15MinTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..899)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Total elapsed seconds in this interval."
+      ::= { adslAturPerfDataEntry 7 }
+
+      adslAturPerfCurr15MinLofs OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Framing."
+      ::= { adslAturPerfDataEntry 8 }
+
+      adslAturPerfCurr15MinLoss  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Signal."
+      ::= { adslAturPerfDataEntry 9 }
+
+      adslAturPerfCurr15MinLprs  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the current 15 minute interval
+              when there was Loss of Power."
+      ::= { adslAturPerfDataEntry 10 }
+
+      adslAturPerfCurr15MinESs OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+             "Count of Errored Seconds in the current 15 minute
+             interval.  The errored second parameter is a count of
+             one-second intervals containing one or more crc
+             anomalies, or one or more los or sef defects."
+      ::= { adslAturPerfDataEntry 11 }
+
+      -- 1-day current and previous performance group
+      --
+      adslAturPerfCurr1DayTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..86399)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Number of seconds that have elapsed since the
+              beginning of the current 1-day interval."
+      ::= { adslAturPerfDataEntry 12 }
+
+      adslAturPerfCurr1DayLofs  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss
+              of Framing during the current day as measured by
+              adslAturPerfCurr1DayTimeElapsed."
+      ::= { adslAturPerfDataEntry 13 }
+
+      adslAturPerfCurr1DayLoss  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss
+              of Signal during the current day as measured by
+              adslAturPerfCurr1DayTimeElapsed."
+      ::= { adslAturPerfDataEntry 14 }
+
+      adslAturPerfCurr1DayLprs  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the number of seconds when there was Loss
+              of Power during the current day as measured by
+              adslAturPerfCurr1DayTimeElapsed."
+      ::= { adslAturPerfDataEntry 15 }
+
+ adslAturPerfCurr1DayESs OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds during the current day as
+              measured by adslAturPerfCurr1DayTimeElapsed.
+              The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAturPerfDataEntry 16 }
+
+      adslAturPerfPrev1DayMoniSecs OBJECT-TYPE
+          SYNTAX      INTEGER(0..86400)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The amount of time in the previous 1-day interval
+              over which the performance monitoring information
+              is actually counted. This value will be the same as
+              the interval duration except in a situation where
+              performance monitoring data could not be collected
+              for any reason."
+      ::= { adslAturPerfDataEntry 17 }
+
+      adslAturPerfPrev1DayLofs  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Framing within the most recent previous
+              1-day period."
+      ::= { adslAturPerfDataEntry 18 }
+
+      adslAturPerfPrev1DayLoss  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Signal within the most recent previous
+              1-day period."
+      ::= { adslAturPerfDataEntry 19 }
+
+      adslAturPerfPrev1DayLprs  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Power within the most recent previous
+              1-day period."
+      ::= { adslAturPerfDataEntry 20 }
+
+      adslAturPerfPrev1DayESs OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds within the most recent
+              previous 1-day period. The errored second parameter is
+              a count of one-second intervals containing one or more
+              crc anomalies, or one or more los or sef defects."
+      ::= { adslAturPerfDataEntry 21 }
+
+      adslAtucIntervalTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAtucIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUC
+              performance data collection interval.
+              ADSL physical interfaces are
+
+              those ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 8 }
+
+      adslAtucIntervalEntry   OBJECT-TYPE
+          SYNTAX          AdslAtucIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAtucIntervalTable."
+          INDEX           { ifIndex, adslAtucIntervalNumber }
+      ::= { adslAtucIntervalTable 1 }
+
+      AdslAtucIntervalEntry ::=
+          SEQUENCE {
+          adslAtucIntervalNumber          INTEGER,
+          adslAtucIntervalLofs            PerfIntervalCount,
+          adslAtucIntervalLoss            PerfIntervalCount,
+          adslAtucIntervalLols            PerfIntervalCount,
+          adslAtucIntervalLprs            PerfIntervalCount,
+          adslAtucIntervalESs             PerfIntervalCount,
+          adslAtucIntervalInits           PerfIntervalCount,
+          adslAtucIntervalValidData       TruthValue
+          }
+
+      adslAtucIntervalNumber OBJECT-TYPE
+          SYNTAX      INTEGER(1..96)
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "Performance Data Interval number 1 is the
+              the most recent previous interval; interval
+              96 is 24 hours ago.  Intervals 2..96 are
+              optional."
+      ::= { adslAtucIntervalEntry 1 }
+
+      adslAtucIntervalLofs OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was Loss
+              of Framing."
+      ::= { adslAtucIntervalEntry 2 }
+
+      adslAtucIntervalLoss  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was Loss
+              of Signal."
+      ::= { adslAtucIntervalEntry 3 }
+
+      adslAtucIntervalLols  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was Loss
+              of Link."
+      ::= { adslAtucIntervalEntry 4 }
+
+      adslAtucIntervalLprs  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was Loss
+              of Power."
+      ::= { adslAtucIntervalEntry 5 }
+
+      adslAtucIntervalESs OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds in the interval.
+              The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAtucIntervalEntry 6 }
+
+      adslAtucIntervalInits  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of the line initialization attempts
+              during the interval. Includes both successful
+              and failed attempts."
+      ::= { adslAtucIntervalEntry 7 }
+
+      adslAtucIntervalValidData OBJECT-TYPE
+          SYNTAX TruthValue
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+              "This variable indicates if the data for this
+              interval is valid."
+      ::= { adslAtucIntervalEntry 8 }
+
+      adslAturIntervalTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAturIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUR
+              performance data collection interval.
+              ADSL physical interfaces are those
+              ifEntries where ifType is equal to adsl(94)."
+      ::= { adslMibObjects 9 }
+
+      adslAturIntervalEntry   OBJECT-TYPE
+          SYNTAX          AdslAturIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAturIntervalTable."
+          INDEX           { ifIndex, adslAturIntervalNumber }
+      ::= { adslAturIntervalTable 1 }
+
+      AdslAturIntervalEntry ::=
+          SEQUENCE {
+          adslAturIntervalNumber          INTEGER,
+          adslAturIntervalLofs            PerfIntervalCount,
+          adslAturIntervalLoss            PerfIntervalCount,
+          adslAturIntervalLprs            PerfIntervalCount,
+          adslAturIntervalESs             PerfIntervalCount,
+          adslAturIntervalValidData       TruthValue
+          }
+
+      adslAturIntervalNumber OBJECT-TYPE
+          SYNTAX      INTEGER(1..96)
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "Performance Data Interval number 1 is the
+              the most recent previous interval; interval
+              96 is 24 hours ago.  Intervals 2..96 are
+              optional."
+      ::= { adslAturIntervalEntry 1 }
+
+      adslAturIntervalLofs OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Framing."
+      ::= { adslAturIntervalEntry 2 }
+
+      adslAturIntervalLoss  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Signal."
+      ::= { adslAturIntervalEntry 3 }
+
+      adslAturIntervalLprs  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of seconds in the interval when there was
+              Loss of Power."
+      ::= { adslAturIntervalEntry 4 }
+
+      adslAturIntervalESs OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of Errored Seconds in the interval.
+              The errored second parameter is a count of
+              one-second intervals containing one or more crc
+              anomalies, or one or more los or sef defects."
+      ::= { adslAturIntervalEntry 5 }
+
+      adslAturIntervalValidData OBJECT-TYPE
+          SYNTAX TruthValue
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+              "This variable indicates if the data for this
+
+              interval is valid."
+      ::= { adslAturIntervalEntry 6 }
+
+      adslAtucChanPerfDataTable       OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAtucChanPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUC channel.
+              ADSL channel interfaces are those ifEntries
+              where ifType is equal to adslInterleave(124)
+              or adslFast(125)."
+      ::= { adslMibObjects 10 }
+
+      adslAtucChanPerfDataEntry       OBJECT-TYPE
+          SYNTAX          AdslAtucChanPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in adslAtucChanPerfDataTable."
+          INDEX           { ifIndex }
+      ::= { adslAtucChanPerfDataTable 1 }
+
+      AdslAtucChanPerfDataEntry ::=
+       SEQUENCE {
+       adslAtucChanReceivedBlks                 Counter32,
+       adslAtucChanTransmittedBlks              Counter32,
+       adslAtucChanCorrectedBlks                Counter32,
+       adslAtucChanUncorrectBlks                Counter32,
+       adslAtucChanPerfValidIntervals           INTEGER,
+       adslAtucChanPerfInvalidIntervals         INTEGER,
+       adslAtucChanPerfCurr15MinTimeElapsed     AdslPerfTimeElapsed,
+       adslAtucChanPerfCurr15MinReceivedBlks    PerfCurrentCount,
+       adslAtucChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
+       adslAtucChanPerfCurr15MinCorrectedBlks   PerfCurrentCount,
+       adslAtucChanPerfCurr15MinUncorrectBlks   PerfCurrentCount,
+       adslAtucChanPerfCurr1DayTimeElapsed      AdslPerfTimeElapsed,
+       adslAtucChanPerfCurr1DayReceivedBlks     AdslPerfCurrDayCount,
+       adslAtucChanPerfCurr1DayTransmittedBlks  AdslPerfCurrDayCount,
+       adslAtucChanPerfCurr1DayCorrectedBlks    AdslPerfCurrDayCount,
+       adslAtucChanPerfCurr1DayUncorrectBlks    AdslPerfCurrDayCount,
+       adslAtucChanPerfPrev1DayMoniSecs         INTEGER,
+       adslAtucChanPerfPrev1DayReceivedBlks     AdslPerfPrevDayCount,
+       adslAtucChanPerfPrev1DayTransmittedBlks  AdslPerfPrevDayCount,
+       adslAtucChanPerfPrev1DayCorrectedBlks    AdslPerfPrevDayCount,
+       adslAtucChanPerfPrev1DayUncorrectBlks    AdslPerfPrevDayCount
+      }
+      -- performance group
+
+      --
+      -- Note: block is intended to be the length of the channel
+      --       data-block on which the CRC operates. See
+      --       adslAtucChanCrcBlockLength for more information.
+      --
+      adslAtucChanReceivedBlks OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this channel
+              since agent reset."
+      ::= { adslAtucChanPerfDataEntry 1 }
+
+      adslAtucChanTransmittedBlks  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel since agent reset."
+      ::= { adslAtucChanPerfDataEntry 2 }
+
+      adslAtucChanCorrectedBlks  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected since agent reset.  These blocks are passed
+              on as good data."
+      ::= { adslAtucChanPerfDataEntry 3 }
+
+      adslAtucChanUncorrectBlks  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors since agent reset."
+      ::= { adslAtucChanPerfDataEntry 4 }
+
+      -- general 15 min interval information
+      --
+      adslAtucChanPerfValidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of previous 15-minute intervals in the
+              interval table for which data was collected.  Given
+              that <n> is the maximum # of intervals supported.
+              The value will be <n> unless the measurement was
+              (re-)started within the last (<n>*15) minutes, in which
+              case the value will be the number of complete 15
+              minute intervals for which the agent has at least
+              some data. In certain cases (e.g., in the case
+              where the agent is a proxy) it is possible that some
+              intervals are unavailable.  In this case, this
+              interval is the maximum interval number for
+              which data is available."
+      ::= { adslAtucChanPerfDataEntry 5 }
+
+      adslAtucChanPerfInvalidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of intervals in the range from
+              0 to the value of adslAtucChanPerfValidIntervals
+              for which no data is available. This object
+              will typically be zero except in cases where
+              the data for some intervals are not available
+              (e.g., in proxy situations)."
+      ::= { adslAtucChanPerfDataEntry 6 }
+
+      -- 15 min current performance group
+      --
+      adslAtucChanPerfCurr15MinTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..899)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Total elapsed seconds in this interval."
+      ::= { adslAtucChanPerfDataEntry 7 }
+
+      adslAtucChanPerfCurr15MinReceivedBlks OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this channel
+              within the current 15 minute interval."
+      ::= { adslAtucChanPerfDataEntry 8 }
+
+      adslAtucChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel within the current 15 minute interval."
+      ::= { adslAtucChanPerfDataEntry 9 }
+
+      adslAtucChanPerfCurr15MinCorrectedBlks  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel within the current 15 minute
+              interval."
+      ::= { adslAtucChanPerfDataEntry 10 }
+
+      adslAtucChanPerfCurr15MinUncorrectBlks  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel within the current 15 minute
+              interval."
+      ::= { adslAtucChanPerfDataEntry 11 }
+
+      -- 1-day current and previous performance group
+      --
+      adslAtucChanPerfCurr1DayTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..86399)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Number of seconds that have elapsed since the
+              beginning of the current 1-day interval."
+      ::= { adslAtucChanPerfDataEntry 12 }
+
+      adslAtucChanPerfCurr1DayReceivedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this
+              channel during the current day as measured by
+
+              adslAtucChanPerfCurr1DayTimeElapsed."
+      ::= { adslAtucChanPerfDataEntry 13 }
+
+      adslAtucChanPerfCurr1DayTransmittedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel during the current day as measured by
+              adslAtucChanPerfCurr1DayTimeElapsed."
+      ::= { adslAtucChanPerfDataEntry 14 }
+
+      adslAtucChanPerfCurr1DayCorrectedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel during the current day as
+              measured by adslAtucChanPerfCurr1DayTimeElapsed."
+      ::= { adslAtucChanPerfDataEntry 15 }
+
+      adslAtucChanPerfCurr1DayUncorrectBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel during the current day as
+              measured by adslAtucChanPerfCurr1DayTimeElapsed."
+      ::= { adslAtucChanPerfDataEntry 16 }
+
+      adslAtucChanPerfPrev1DayMoniSecs OBJECT-TYPE
+          SYNTAX      INTEGER(0..86400)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The amount of time in the previous 1-day interval
+              over which the performance monitoring information
+              is actually counted. This value will be the same as
+              the interval duration except in a situation where
+              performance monitoring data could not be collected
+              for any reason."
+      ::= { adslAtucChanPerfDataEntry 17 }
+
+      adslAtucChanPerfPrev1DayReceivedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this
+              channel within the most recent previous 1-day
+              period."
+      ::= { adslAtucChanPerfDataEntry 18 }
+
+      adslAtucChanPerfPrev1DayTransmittedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel within the most recent previous 1-day
+              period."
+      ::= { adslAtucChanPerfDataEntry 19 }
+
+      adslAtucChanPerfPrev1DayCorrectedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel within the most recent
+              previous 1-day period."
+      ::= { adslAtucChanPerfDataEntry 20 }
+
+      adslAtucChanPerfPrev1DayUncorrectBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel within the most recent previous
+              1-day period."
+      ::= { adslAtucChanPerfDataEntry 21 }
+
+      adslAturChanPerfDataTable       OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAturChanPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUR channel.
+              ADSL channel interfaces are those ifEntries
+              where ifType is equal to adslInterleave(124)
+              or adslFast(125)."
+      ::= { adslMibObjects 11 }
+
+      adslAturChanPerfDataEntry       OBJECT-TYPE
+          SYNTAX          AdslAturChanPerfDataEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in adslAturChanPerfDataTable."
+          INDEX           { ifIndex }
+      ::= { adslAturChanPerfDataTable 1 }
+
+      AdslAturChanPerfDataEntry ::=
+       SEQUENCE {
+       adslAturChanReceivedBlks                 Counter32,
+       adslAturChanTransmittedBlks              Counter32,
+       adslAturChanCorrectedBlks                Counter32,
+       adslAturChanUncorrectBlks                Counter32,
+       adslAturChanPerfValidIntervals           INTEGER,
+       adslAturChanPerfInvalidIntervals         INTEGER,
+       adslAturChanPerfCurr15MinTimeElapsed     AdslPerfTimeElapsed,
+       adslAturChanPerfCurr15MinReceivedBlks    PerfCurrentCount,
+       adslAturChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
+       adslAturChanPerfCurr15MinCorrectedBlks   PerfCurrentCount,
+       adslAturChanPerfCurr15MinUncorrectBlks   PerfCurrentCount,
+       adslAturChanPerfCurr1DayTimeElapsed      AdslPerfTimeElapsed,
+       adslAturChanPerfCurr1DayReceivedBlks     AdslPerfCurrDayCount,
+       adslAturChanPerfCurr1DayTransmittedBlks  AdslPerfCurrDayCount,
+       adslAturChanPerfCurr1DayCorrectedBlks    AdslPerfCurrDayCount,
+       adslAturChanPerfCurr1DayUncorrectBlks    AdslPerfCurrDayCount,
+       adslAturChanPerfPrev1DayMoniSecs         INTEGER,
+       adslAturChanPerfPrev1DayReceivedBlks     AdslPerfPrevDayCount,
+       adslAturChanPerfPrev1DayTransmittedBlks  AdslPerfPrevDayCount,
+       adslAturChanPerfPrev1DayCorrectedBlks    AdslPerfPrevDayCount,
+       adslAturChanPerfPrev1DayUncorrectBlks    AdslPerfPrevDayCount
+       }
+      -- performance group
+      --
+      -- Note: block is intended to be the length of the channel
+      --       data-block on which the CRC operates. See
+      --       adslAturChanCrcBlockLength for more information.
+      --
+      adslAturChanReceivedBlks OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this channel
+              since agent reset."
+      ::= { adslAturChanPerfDataEntry 1 }
+
+      adslAturChanTransmittedBlks  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel since agent reset."
+      ::= { adslAturChanPerfDataEntry 2 }
+
+      adslAturChanCorrectedBlks  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected since agent reset.  These blocks are passed
+              on as good data."
+      ::= { adslAturChanPerfDataEntry 3 }
+
+      adslAturChanUncorrectBlks  OBJECT-TYPE
+          SYNTAX      Counter32
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors since agent reset."
+      ::= { adslAturChanPerfDataEntry 4 }
+
+      -- general 15 min interval information
+      --
+      adslAturChanPerfValidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of previous 15-minute intervals in the
+              interval table for which data was collected.  Given
+              that <n> is the maximum # of intervals supported.
+              The value will be <n> unless the measurement was
+              (re-)started within the last (<n>*15) minutes, in which
+              case the value will be the number of complete 15
+              minute intervals for which the agent has at least
+              some data. In certain cases (e.g., in the case
+              where the agent is a proxy) it is possible that some
+              intervals are unavailable.  In this case, this
+              interval is the maximum interval number for
+              which data is available."
+      ::= { adslAturChanPerfDataEntry 5 }
+
+      adslAturChanPerfInvalidIntervals OBJECT-TYPE
+          SYNTAX      INTEGER(0..96)
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The number of intervals in the range from
+              0 to the value of adslAturChanPerfValidIntervals
+              for which no data is available. This object
+              will typically be zero except in cases where
+              the data for some intervals are not available
+              (e.g., in proxy situations)."
+      ::= { adslAturChanPerfDataEntry 6 }
+
+      -- 15 min current performance group
+      --
+      adslAturChanPerfCurr15MinTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..899)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Total elapsed seconds in this interval.
+              A full interval is 900 seconds."
+      ::= { adslAturChanPerfDataEntry 7 }
+
+      adslAturChanPerfCurr15MinReceivedBlks OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this
+              channel within the current 15 minute interval."
+      ::= { adslAturChanPerfDataEntry 8 }
+
+      adslAturChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel within the current 15 minute interval."
+      ::= { adslAturChanPerfDataEntry 9 }
+
+      adslAturChanPerfCurr15MinCorrectedBlks  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel within the current 15 minute
+              interval."
+      ::= { adslAturChanPerfDataEntry 10 }
+
+      adslAturChanPerfCurr15MinUncorrectBlks  OBJECT-TYPE
+          SYNTAX      PerfCurrentCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel within the current 15 minute
+              interval."
+      ::= { adslAturChanPerfDataEntry 11 }
+
+      -- 1-day current and previous performance group
+      --
+      adslAturChanPerfCurr1DayTimeElapsed OBJECT-TYPE
+          SYNTAX      AdslPerfTimeElapsed(0..86399)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Number of seconds that have elapsed since the
+              beginning of the current 1-day interval."
+      ::= { adslAturChanPerfDataEntry 12 }
+
+      adslAturChanPerfCurr1DayReceivedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this
+              channel during the current day as measured by
+              adslAturChanPerfCurr1DayTimeElapsed."
+      ::= { adslAturChanPerfDataEntry 13 }
+
+      adslAturChanPerfCurr1DayTransmittedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel during the current day as measured by
+              adslAturChanPerfCurr1DayTimeElapsed."
+      ::= { adslAturChanPerfDataEntry 14 }
+
+      adslAturChanPerfCurr1DayCorrectedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel during the current day as
+              measured by adslAturChanPerfCurr1DayTimeElapsed."
+      ::= { adslAturChanPerfDataEntry 15 }
+
+      adslAturChanPerfCurr1DayUncorrectBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfCurrDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel during the current day as
+              measured by adslAturChanPerfCurr1DayTimeElapsed."
+      ::= { adslAturChanPerfDataEntry 16 }
+
+      adslAturChanPerfPrev1DayMoniSecs OBJECT-TYPE
+          SYNTAX      INTEGER(0..86400)
+          UNITS       "seconds"
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "The amount of time in the previous 1-day interval
+              over which the performance monitoring information
+              is actually counted. This value will be the same as
+              the interval duration except in a situation where
+              performance monitoring data could not be collected
+              for any reason."
+      ::= { adslAturChanPerfDataEntry 17 }
+
+      adslAturChanPerfPrev1DayReceivedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this
+              channel within the most recent previous 1-day
+              period."
+      ::= { adslAturChanPerfDataEntry 18 }
+
+      adslAturChanPerfPrev1DayTransmittedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel within the most recent previous 1-day
+              period."
+      ::= { adslAturChanPerfDataEntry 19 }
+
+      adslAturChanPerfPrev1DayCorrectedBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel within the most recent
+              previous 1-day period."
+      ::= { adslAturChanPerfDataEntry 20 }
+
+      adslAturChanPerfPrev1DayUncorrectBlks  OBJECT-TYPE
+          SYNTAX      AdslPerfPrevDayCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel within the most recent previous
+              1-day period."
+      ::= { adslAturChanPerfDataEntry 21 }
+
+      adslAtucChanIntervalTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAtucChanIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUC channel's
+              performance data collection interval.
+              ADSL channel interfaces are those ifEntries
+              where ifType is equal to adslInterleave(124)
+              or adslFast(125)."
+      ::= { adslMibObjects 12 }
+
+      adslAtucChanIntervalEntry   OBJECT-TYPE
+          SYNTAX          AdslAtucChanIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAtucIntervalTable."
+          INDEX           { ifIndex, adslAtucChanIntervalNumber }
+      ::= { adslAtucChanIntervalTable 1 }
+
+      AdslAtucChanIntervalEntry ::=
+          SEQUENCE {
+
+          adslAtucChanIntervalNumber          INTEGER,
+          adslAtucChanIntervalReceivedBlks    PerfIntervalCount,
+          adslAtucChanIntervalTransmittedBlks PerfIntervalCount,
+          adslAtucChanIntervalCorrectedBlks   PerfIntervalCount,
+          adslAtucChanIntervalUncorrectBlks   PerfIntervalCount,
+          adslAtucChanIntervalValidData       TruthValue
+          }
+      adslAtucChanIntervalNumber OBJECT-TYPE
+          SYNTAX      INTEGER(1..96)
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "Performance Data Interval number 1 is the
+              the most recent previous interval; interval
+              96 is 24 hours ago.  Intervals 2..96 are
+              optional."
+      ::= { adslAtucChanIntervalEntry 1 }
+
+      adslAtucChanIntervalReceivedBlks OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this channel
+              during this interval."
+      ::= { adslAtucChanIntervalEntry 2 }
+
+      adslAtucChanIntervalTransmittedBlks  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel during this interval."
+      ::= { adslAtucChanIntervalEntry 3 }
+
+      adslAtucChanIntervalCorrectedBlks  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel during this interval."
+      ::= { adslAtucChanIntervalEntry 4 }
+
+      adslAtucChanIntervalUncorrectBlks  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel during this interval."
+      ::= { adslAtucChanIntervalEntry 5 }
+
+      adslAtucChanIntervalValidData OBJECT-TYPE
+          SYNTAX TruthValue
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+              "This variable indicates if the data for this
+              interval is valid."
+      ::= { adslAtucChanIntervalEntry 6 }
+
+      adslAturChanIntervalTable   OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslAturChanIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table provides one row for each ATUR channel's
+              performance data collection interval.
+              ADSL channel interfaces are those ifEntries
+              where ifType is equal to adslInterleave(124)
+              or adslFast(125)."
+      ::= { adslMibObjects 13 }
+
+      adslAturChanIntervalEntry   OBJECT-TYPE
+          SYNTAX          AdslAturChanIntervalEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION     "An entry in the adslAturIntervalTable."
+          INDEX           { ifIndex, adslAturChanIntervalNumber }
+      ::= { adslAturChanIntervalTable 1 }
+
+      AdslAturChanIntervalEntry ::=
+          SEQUENCE {
+          adslAturChanIntervalNumber               INTEGER,
+          adslAturChanIntervalReceivedBlks         PerfIntervalCount,
+          adslAturChanIntervalTransmittedBlks      PerfIntervalCount,
+          adslAturChanIntervalCorrectedBlks        PerfIntervalCount,
+          adslAturChanIntervalUncorrectBlks        PerfIntervalCount,
+          adslAturChanIntervalValidData            TruthValue
+          }
+      adslAturChanIntervalNumber OBJECT-TYPE
+          SYNTAX      INTEGER(1..96)
+          MAX-ACCESS  not-accessible
+          STATUS      current
+          DESCRIPTION
+              "Performance Data Interval number 1 is the
+              the most recent previous interval; interval
+              96 is 24 hours ago.  Intervals 2..96 are
+              optional."
+      ::= { adslAturChanIntervalEntry 1 }
+
+      adslAturChanIntervalReceivedBlks OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks received on this channel
+              during this interval."
+      ::= { adslAturChanIntervalEntry 2 }
+
+      adslAturChanIntervalTransmittedBlks  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all encoded blocks transmitted on this
+              channel during this interval."
+      ::= { adslAturChanIntervalEntry 3 }
+
+      adslAturChanIntervalCorrectedBlks  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with errors that were
+              corrected on this channel during this interval."
+      ::= { adslAturChanIntervalEntry 4 }
+
+      adslAturChanIntervalUncorrectBlks  OBJECT-TYPE
+          SYNTAX      PerfIntervalCount
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+              "Count of all blocks received with uncorrectable
+              errors on this channel during this interval."
+      ::= { adslAturChanIntervalEntry 5 }
+
+      adslAturChanIntervalValidData OBJECT-TYPE
+          SYNTAX TruthValue
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+              "This variable indicates if the data for this
+              interval is valid."
+      ::= { adslAturChanIntervalEntry 6 }
+
+      -- Profile Group
+      --
+
+      adslLineConfProfileTable    OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslLineConfProfileEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table contains information on the ADSL line
+              configuration.  One entry in this table reflects a
+              profile defined by a manager which can be used to
+              configure the ADSL line."
+      ::= { adslMibObjects 14}
+
+      adslLineConfProfileEntry    OBJECT-TYPE
+          SYNTAX          AdslLineConfProfileEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "Each entry consists of a list of parameters that
+              represents the configuration of an ADSL modem.
+
+              When `dynamic' profiles are implemented, a default
+              profile will always exist.  This profile's name will
+              be set to `DEFVAL' and its parameters will be set
+              to vendor specific values, unless otherwise specified
+              in this document.
+
+              When `static' profiles are implemented, profiles
+              are automaticly created or destroyed as ADSL
+              physical lines are discovered and removed by
+              the system.  The name of the profile will be
+              equivalent to the decimal value of the line's
+              interface index.
+              "
+          INDEX { IMPLIED adslLineConfProfileName}
+      ::= { adslLineConfProfileTable 1}
+
+      AdslLineConfProfileEntry ::=
+          SEQUENCE {
+          adslLineConfProfileName               SnmpAdminString,
+          adslAtucConfRateMode                  INTEGER,
+          adslAtucConfRateChanRatio             INTEGER,
+          adslAtucConfTargetSnrMgn              INTEGER,
+          adslAtucConfMaxSnrMgn                 INTEGER,
+          adslAtucConfMinSnrMgn                 INTEGER,
+          adslAtucConfDownshiftSnrMgn           INTEGER,
+          adslAtucConfUpshiftSnrMgn             INTEGER,
+          adslAtucConfMinUpshiftTime            INTEGER,
+          adslAtucConfMinDownshiftTime          INTEGER,
+          adslAtucChanConfFastMinTxRate         Unsigned32,
+          adslAtucChanConfInterleaveMinTxRate   Unsigned32,
+          adslAtucChanConfFastMaxTxRate         Unsigned32,
+          adslAtucChanConfInterleaveMaxTxRate   Unsigned32,
+          adslAtucChanConfMaxInterleaveDelay    INTEGER,
+          adslAturConfRateMode                  INTEGER,
+          adslAturConfRateChanRatio             INTEGER,
+          adslAturConfTargetSnrMgn              INTEGER,
+          adslAturConfMaxSnrMgn                 INTEGER,
+          adslAturConfMinSnrMgn                 INTEGER,
+          adslAturConfDownshiftSnrMgn           INTEGER,
+          adslAturConfUpshiftSnrMgn             INTEGER,
+          adslAturConfMinUpshiftTime            INTEGER,
+          adslAturConfMinDownshiftTime          INTEGER,
+          adslAturChanConfFastMinTxRate         Unsigned32,
+          adslAturChanConfInterleaveMinTxRate   Unsigned32,
+          adslAturChanConfFastMaxTxRate         Unsigned32,
+          adslAturChanConfInterleaveMaxTxRate   Unsigned32,
+          adslAturChanConfMaxInterleaveDelay    INTEGER,
+          adslLineConfProfileRowStatus          RowStatus
+      }
+
+      adslLineConfProfileName    OBJECT-TYPE
+              SYNTAX          SnmpAdminString (SIZE (1..32))
+              MAX-ACCESS      not-accessible
+              STATUS          current
+              DESCRIPTION
+              "This object is used by the line configuration table
+              in order to identify a row of this table.
+
+              When `dynamic' profiles are implemented, the profile
+              name is user specified.  Also, the system will always
+              provide a default profile whose name is `DEFVAL'.
+
+              When `static' profiles are implemented, there is an
+              one-to-one relationship between each line and its
+              profile.  In which case, the profile name will
+              need to algorithmicly represent the Line's ifIndex.
+              Therefore, the profile's name is a decimalized string
+              of the ifIndex that is fixed-length (i.e., 10) with
+              leading zero(s).  For example, the profile name for
+              ifIndex which equals '15' will be '0000000015'."
+      ::= { adslLineConfProfileEntry 1 }
+
+      adslAtucConfRateMode OBJECT-TYPE
+          SYNTAX      INTEGER {
+              fixed (1),              -- no rate adaptation
+              adaptAtStartup (2),     -- perform rate adaptation
+                                      -- only at initialization
+              adaptAtRuntime (3)      -- perform rate adaptation at
+                                      -- any time
+          }
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Defines what form of transmit rate adaptation is
+              configured on this modem.  See ADSL Forum TR-005 [3]
+              for more information."
+      ::= { adslLineConfProfileEntry 2 }
+
+      adslAtucConfRateChanRatio OBJECT-TYPE
+          SYNTAX      INTEGER(0..100)
+          UNITS        "%"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured allocation ratio of excess transmit
+              bandwidth between fast and interleaved channels.  Only
+              applies when two channel mode and RADSL are supported.
+              Distribute bandwidth on each channel in excess of the
+              corresponding ChanConfMinTxRate so that:
+              adslAtucConfRateChanRatio =
+
+                      [Fast / (Fast + Interleaved)] * 100
+
+              In other words this value is the fast channel
+              percentage."
+      ::= { adslLineConfProfileEntry 3 }
+
+    adslAtucConfTargetSnrMgn OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Target Signal/Noise Margin.
+              This is the Noise Margin the modem must achieve
+              with a BER of 10-7 or better to successfully complete
+              initialization."
+      ::= { adslLineConfProfileEntry 4 }
+
+    adslAtucConfMaxSnrMgn OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Maximum acceptable Signal/Noise Margin.
+              If the Noise Margin is above this the modem should
+              attempt to reduce its power output to optimize its
+              operation."
+      ::= { adslLineConfProfileEntry 5 }
+
+      adslAtucConfMinSnrMgn  OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Minimum acceptable Signal/Noise Margin.
+              If the noise margin falls below this level, the modem
+              should attempt to increase its power output.  If that
+              is not possible the modem will attempt to
+              re-initialize or shut down."
+      ::= { adslLineConfProfileEntry 6 }
+
+      adslAtucConfDownshiftSnrMgn  OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Signal/Noise Margin for rate downshift.
+              If the noise margin falls below this level, the modem
+              should attempt to decrease its transmit rate.  In
+              the case that RADSL mode is not present,
+              the value will be `0'."
+      ::= { adslLineConfProfileEntry 7 }
+
+      adslAtucConfUpshiftSnrMgn  OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Signal/Noise Margin for rate upshift.
+              If the noise margin rises above this level, the modem
+              should attempt to increase its transmit rate.    In
+              the case that RADSL is not present, the value will
+
+              be `0'."
+      ::= { adslLineConfProfileEntry 8 }
+
+      adslAtucConfMinUpshiftTime OBJECT-TYPE
+          SYNTAX      INTEGER(0..16383)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Minimum time that the current margin is above
+              UpshiftSnrMgn before an upshift occurs.
+              In the case that RADSL is not present, the value will
+              be `0'."
+      ::= { adslLineConfProfileEntry 9 }
+     adslAtucConfMinDownshiftTime OBJECT-TYPE
+          SYNTAX      INTEGER(0..16383)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Minimum time that the current margin is below
+              DownshiftSnrMgn before a downshift occurs.
+              In the case that RADSL mode is not present,
+              the value will be `0'."
+      ::= { adslLineConfProfileEntry 10 }
+
+      adslAtucChanConfFastMinTxRate  OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Minimum Transmit rate for `Fast' channels,
+              in bps.  See adslAtucConfRateChanRatio for information
+              regarding RADSL mode and ATUR transmit rate for
+              ATUC receive rates."
+      ::= { adslLineConfProfileEntry 11 }
+
+      adslAtucChanConfInterleaveMinTxRate OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Minimum Transmit rate for `Interleave'
+              channels, in bps.  See adslAtucConfRateChanRatio for
+              information regarding RADSL mode and see
+              ATUR transmit rate for receive rates."
+      ::= { adslLineConfProfileEntry 12 }
+
+      adslAtucChanConfFastMaxTxRate  OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Maximum Transmit rate for `Fast' channels,
+              in bps.  See adslAtucConfRateChanRatio for information
+              regarding RADSL mode and see ATUR transmit rate for
+              ATUC receive rates."
+      ::= { adslLineConfProfileEntry 13 }
+
+      adslAtucChanConfInterleaveMaxTxRate OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Maximum Transmit rate for `Interleave'
+              channels, in bps.  See adslAtucConfRateChanRatio for
+              information regarding RADSL mode and ATUR transmit
+              rate for ATUC receive rates."
+      ::= { adslLineConfProfileEntry 14 }
+
+      adslAtucChanConfMaxInterleaveDelay OBJECT-TYPE
+          SYNTAX      INTEGER(0..255)
+          UNITS        "milli-seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured maximum Interleave Delay for this channel.
+
+              Interleave delay applies only to the interleave channel
+              and defines the mapping (relative spacing) between
+              subsequent input bytes at the interleaver input and
+              their placement in the bit stream at the interleaver
+              output.  Larger numbers provide greater separation
+              between consecutive input bytes in the output bit
+              stream allowing for improved impulse noise immunity
+              at the expense of payload latency."
+      ::= { adslLineConfProfileEntry 15 }
+
+      adslAturConfRateMode OBJECT-TYPE
+          SYNTAX      INTEGER {
+              fixed (1),              -- no rate adaptation
+              adaptAtStartup (2),     -- perform rate adaptation
+
+                                      -- only at initialization
+              adaptAtRuntime (3)      -- perform rate adaptation at
+                                      -- any time
+          }
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Defines what form of transmit rate adaptation is
+              configured on this modem.  See ADSL Forum TR-005 [3]
+              for more information."
+      ::= { adslLineConfProfileEntry 16 }
+
+      adslAturConfRateChanRatio OBJECT-TYPE
+          SYNTAX      INTEGER(0..100)
+          UNITS        "%"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured allocation ratio of excess transmit
+              bandwidth between fast and interleaved channels.  Only
+              applies when two channel mode and RADSL are supported.
+              Distribute bandwidth on each channel in excess of the
+              corresponding ChanConfMinTxRate so that:
+              adslAturConfRateChanRatio =
+
+                      [Fast / (Fast + Interleaved)] * 100
+
+              In other words this value is the fast channel
+              percentage."
+      ::= { adslLineConfProfileEntry 17 }
+
+    adslAturConfTargetSnrMgn OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Target Signal/Noise Margin.
+              This is the Noise Margin the modem must achieve
+              with a BER of 10-7 or better to successfully complete
+              initialization."
+      ::= { adslLineConfProfileEntry 18 }
+
+    adslAturConfMaxSnrMgn OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Maximum acceptable Signal/Noise Margin.
+              If the Noise Margin is above this the modem should
+              attempt to reduce its power output to optimize its
+              operation."
+      ::= { adslLineConfProfileEntry 19 }
+
+     adslAturConfMinSnrMgn  OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Minimum acceptable Signal/Noise Margin.
+              If the noise margin falls below this level, the modem
+              should attempt to increase its power output.  If that
+              is not possible the modem will attempt to
+              re-initialize or shut down."
+      ::= { adslLineConfProfileEntry 20 }
+
+      adslAturConfDownshiftSnrMgn  OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Signal/Noise Margin for rate downshift.
+              If the noise margin falls below this level, the modem
+              should attempt to decrease its transmit rate.
+              In the case that RADSL mode is not present,
+              the value will be `0'."
+      ::= { adslLineConfProfileEntry 21 }
+
+      adslAturConfUpshiftSnrMgn  OBJECT-TYPE
+          SYNTAX      INTEGER (0..310)
+          UNITS       "tenth dB"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Signal/Noise Margin for rate upshift.
+              If the noise margin rises above this level, the modem
+              should attempt to increase its transmit rate.
+              In the case that RADSL is not present,
+              the value will be `0'."
+      ::= { adslLineConfProfileEntry 22 }
+
+      adslAturConfMinUpshiftTime OBJECT-TYPE
+          SYNTAX      INTEGER(0..16383)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Minimum time that the current margin is above
+              UpshiftSnrMgn before an upshift occurs.
+              In the case that RADSL is not present, the value will
+              be `0'."
+      ::= { adslLineConfProfileEntry 23 }
+
+     adslAturConfMinDownshiftTime OBJECT-TYPE
+          SYNTAX      INTEGER(0..16383)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Minimum time that the current margin is below
+              DownshiftSnrMgn before a downshift occurs.
+              In the case that RADSL mode is not present,
+              the value will be `0'."
+      ::= { adslLineConfProfileEntry 24 }
+
+      adslAturChanConfFastMinTxRate  OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Minimum Transmit rate for `Fast' channels,
+              in bps.  See adslAturConfRateChanRatio for information
+              regarding RADSL mode and ATUC transmit rate
+              for ATUR receive rates."
+      ::= { adslLineConfProfileEntry 25 }
+
+      adslAturChanConfInterleaveMinTxRate OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Minimum Transmit rate for `Interleave'
+              channels, in bps.  See adslAturConfRateChanRatio for
+              information regarding RADSL mode and ATUC transmit rate
+              for ATUR receive rates."
+      ::= { adslLineConfProfileEntry 26 }
+
+      adslAturChanConfFastMaxTxRate  OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Maximum Transmit rate for `Fast' channels,
+              in bps.  See adslAturConfRateChanRatio for information
+              regarding RADSL mode and ATUC transmit rate
+              for ATUR receive rates."
+      ::= { adslLineConfProfileEntry 27 }
+
+      adslAturChanConfInterleaveMaxTxRate OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured Maximum Transmit rate for `Interleave'
+              channels, in bps.  See adslAturConfRateChanRatio for
+              information regarding RADSL mode and see
+              ATUC transmit rate for ATUR receive rates."
+      ::= { adslLineConfProfileEntry 28 }
+
+      adslAturChanConfMaxInterleaveDelay OBJECT-TYPE
+          SYNTAX      INTEGER(0..255)
+          UNITS        "milli-seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Configured maximum Interleave Delay for this channel.
+
+              Interleave delay applies only to the interleave channel
+              and defines the mapping (relative spacing) between
+              subsequent input bytes at the interleaver input and
+              their placement in the bit stream at the interleaver
+              output.  Larger numbers provide greater separation
+              between consecutive input bytes in the output bit
+              stream allowing for improved impulse noise immunity
+              at the expense of payload latency."
+      ::= { adslLineConfProfileEntry 29 }
+
+      adslLineConfProfileRowStatus OBJECT-TYPE
+          SYNTAX          RowStatus
+          MAX-ACCESS      read-create
+          STATUS          current
+          DESCRIPTION
+              "This object is used to create a new row or modify or
+              delete an existing row in this table.
+
+              A profile activated by setting this object to
+              `active'.  When `active' is set, the system
+              will validate the profile.
+
+              Before a profile can be deleted or taken out of
+              service, (by setting this object to `destroy' or
+              `outOfService') it must be first unreferenced
+              from all associated lines.
+
+              If the implementator of this MIB has chosen not
+              to implement `dynamic assignment' of profiles, this
+              object's MIN-ACCESS is read-only and its value
+              is always to be `active'."
+      ::= { adslLineConfProfileEntry 30 }
+
+      adslLineAlarmConfProfileTable    OBJECT-TYPE
+          SYNTAX          SEQUENCE OF AdslLineAlarmConfProfileEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This table contains information on the ADSL line
+              configuration.  One entry in this table reflects a
+              profile defined by a manager which can be used to
+              configure the modem for a physical line"
+      ::= { adslMibObjects 15}
+
+      adslLineAlarmConfProfileEntry    OBJECT-TYPE
+          SYNTAX          AdslLineAlarmConfProfileEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "Each entry consists of a list of parameters that
+              represents the configuration of an ADSL modem.
+
+              When `dynamic' profiles are implemented, a default
+              profile will always exist.  This profile's name will
+              be set to `DEFVAL' and its parameters will be set to
+              vendor specific values, unless otherwise specified
+              in this document.
+
+              When `static' profiles are implemented, profiles
+              are automaticly created or destroyed as ADSL
+              physical lines are discovered and removed by
+              the system.  The name of the profile will be
+              equivalent to the decimal value of the line's
+              interface index.
+              "
+          INDEX { IMPLIED adslLineAlarmConfProfileName}
+      ::= { adslLineAlarmConfProfileTable 1}
+
+      AdslLineAlarmConfProfileEntry ::=
+          SEQUENCE {
+          adslLineAlarmConfProfileName          SnmpAdminString,
+          adslAtucThresh15MinLofs               INTEGER,
+          adslAtucThresh15MinLoss               INTEGER,
+          adslAtucThresh15MinLols               INTEGER,
+          adslAtucThresh15MinLprs               INTEGER,
+          adslAtucThresh15MinESs                INTEGER,
+          adslAtucThreshFastRateUp              Unsigned32,
+          adslAtucThreshInterleaveRateUp        Unsigned32,
+          adslAtucThreshFastRateDown            Unsigned32,
+          adslAtucThreshInterleaveRateDown      Unsigned32,
+          adslAtucInitFailureTrapEnable         INTEGER,
+          adslAturThresh15MinLofs               INTEGER,
+          adslAturThresh15MinLoss               INTEGER,
+          adslAturThresh15MinLprs               INTEGER,
+          adslAturThresh15MinESs                INTEGER,
+          adslAturThreshFastRateUp              Unsigned32,
+          adslAturThreshInterleaveRateUp        Unsigned32,
+          adslAturThreshFastRateDown            Unsigned32,
+          adslAturThreshInterleaveRateDown      Unsigned32,
+          adslLineAlarmConfProfileRowStatus     RowStatus
+          }
+
+      adslLineAlarmConfProfileName    OBJECT-TYPE
+          SYNTAX          SnmpAdminString (SIZE (1..32))
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+              "This object is used by the line alarm configuration
+              table in order to identify a row of this table.
+
+              When `dynamic' profiles are implemented, the profile
+              name is user specified.  Also, the system will always
+              provide a default profile whose name is `DEFVAL'.
+
+              When `static' profiles are implemented, there is an
+              one-to-one relationship between each line and its
+              profile.  In which case, the profile name will
+              need to algorithmicly represent the Line's ifIndex.
+              Therefore, the profile's name is a decimalized string
+              of the ifIndex that is fixed-length (i.e., 10) with
+              leading zero(s).  For example, the profile name for
+              ifIndex which equals '15' will be '0000000015'."
+      ::= { adslLineAlarmConfProfileEntry 1}
+
+      adslAtucThresh15MinLofs OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Frame Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAtucPerfLofsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 2}
+
+      adslAtucThresh15MinLoss  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Signal Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAtucPerfLossThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 3}
+
+      adslAtucThresh15MinLols  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Link Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAtucPerfLolsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 4}
+
+      adslAtucThresh15MinLprs  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Power Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAtucPerfLprsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 5}
+
+      adslAtucThresh15MinESs  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Errored Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAtucPerfESsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 6}
+
+      adslAtucThreshFastRateUp OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Fast' channels only.
+              Configured change in rate causing an
+              adslAtucRateChangeTrap. A trap is produced when:
+              ChanCurrTxRate >= ChanPrevTxRate plus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 7}
+
+      adslAtucThreshInterleaveRateUp OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Interleave' channels only.
+              Configured change in rate causing an
+
+              adslAtucRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate >= ChanPrevTxRate plus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 8}
+
+      adslAtucThreshFastRateDown OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Fast' channels only.
+              Configured change in rate causing an
+              adslAtucRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate <= ChanPrevTxRate minus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 9 }
+
+      adslAtucThreshInterleaveRateDown OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Interleave' channels only.
+              Configured change in rate causing an
+              adslAtucRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate <= ChanPrevTxRate minus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 10 }
+
+      adslAtucInitFailureTrapEnable OBJECT-TYPE
+          SYNTAX      INTEGER {
+              enable (1),
+              disable (2)
+          }
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Enables and disables the InitFailureTrap.  This
+              object is defaulted disable(2)."
+      DEFVAL { disable }
+      ::= { adslLineAlarmConfProfileEntry 11 }
+
+      adslAturThresh15MinLofs OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Frame Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAturPerfLofsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 12 }
+
+      adslAturThresh15MinLoss  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Signal Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAturPerfLossThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 13 }
+
+      adslAturThresh15MinLprs  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Loss of Power Seconds
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAturPerfLprsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 14 }
+
+      adslAturThresh15MinESs  OBJECT-TYPE
+          SYNTAX      INTEGER(0..900)
+          UNITS       "seconds"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "The number of Errored Seconds
+
+              encountered by an ADSL interface within any given 15
+              minutes performance data collection period, which
+              causes the SNMP agent to send an
+              adslAturPerfESsThreshTrap.
+              One trap will be sent per interval per interface.
+              A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 15 }
+
+      adslAturThreshFastRateUp OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Fast' channels only.
+              Configured change in rate causing an
+              adslAturRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate >= ChanPrevTxRate plus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 16 }
+
+      adslAturThreshInterleaveRateUp OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Interleave' channels only.
+              configured change in rate causing an
+              adslAturRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate >= ChanPrevTxRate plus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 17 }
+
+      adslAturThreshFastRateDown OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Fast' channels only.
+              Configured change in rate causing an
+              adslAturRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate <= ChanPrevTxRate minus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 18 }
+
+      adslAturThreshInterleaveRateDown OBJECT-TYPE
+          SYNTAX      Unsigned32
+          UNITS       "bps"
+          MAX-ACCESS  read-create
+          STATUS      current
+          DESCRIPTION
+              "Applies to `Interleave' channels only.
+              Configured change in rate causing an
+              adslAturRateChangeTrap.  A trap is produced when:
+              ChanCurrTxRate <= ChanPrevTxRate minus the value of
+              this object. A value of `0' will disable the trap."
+      ::= { adslLineAlarmConfProfileEntry 19 }
+
+      adslLineAlarmConfProfileRowStatus OBJECT-TYPE
+          SYNTAX          RowStatus
+          MAX-ACCESS      read-create
+          STATUS          current
+          DESCRIPTION
+              "This object is used to create a new row or modify or
+              delete an existing row in this table.
+
+              A profile activated by setting this object to
+              `active'.  When `active' is set, the system
+              will validate the profile.
+
+              Before a profile can be deleted or taken out of
+              service, (by setting this object to `destroy' or
+              `outOfService') it must be first unreferenced
+              from all associated lines.
+
+              If the implementator of this MIB has chosen not
+              to implement `dynamic assignment' of profiles, this
+              object's MIN-ACCESS is read-only and its value
+              is always to be `active'."
+      ::= { adslLineAlarmConfProfileEntry 20 }
+
+      -- Line Code Specific Tables
+
+      -- These are place holders for the Line Code Specific MIBs
+      -- once they become available.
+
+      adslLCSMib  OBJECT IDENTIFIER ::= { adslMibObjects 16 }
+
+-- trap definitions
+
+adslTraps OBJECT IDENTIFIER ::= { adslLineMib 2 }
+
+adslAtucTraps OBJECT IDENTIFIER ::= { adslTraps 1 }
+
+      adslAtucPerfLofsThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAtucPerfCurr15MinLofs,
+                    adslAtucThresh15MinLofs }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Framing 15-minute interval threshold reached."
+      ::= { adslAtucTraps 0 1 }
+
+      adslAtucPerfLossThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAtucPerfCurr15MinLoss,
+                    adslAtucThresh15MinLoss }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Signal 15-minute interval threshold reached."
+      ::= { adslAtucTraps 0 2 }
+
+      adslAtucPerfLprsThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAtucPerfCurr15MinLprs,
+                    adslAtucThresh15MinLprs }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Power 15-minute interval threshold reached."
+      ::= { adslAtucTraps 0 3 }
+
+      adslAtucPerfESsThreshTrap       NOTIFICATION-TYPE
+          OBJECTS { adslAtucPerfCurr15MinESs,
+                    adslAtucThresh15MinESs }
+          STATUS  current
+          DESCRIPTION
+              "Errored Second 15-minute interval threshold reached."
+      ::= { adslAtucTraps 0 4 }
+
+      adslAtucRateChangeTrap  NOTIFICATION-TYPE
+          OBJECTS { adslAtucChanCurrTxRate,
+                    adslAtucChanPrevTxRate }
+          STATUS  current
+          DESCRIPTION
+              "The ATUCs transmit rate has changed (RADSL mode only)"
+      ::= { adslAtucTraps 0 5 }
+
+      adslAtucPerfLolsThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAtucPerfCurr15MinLols,
+                    adslAtucThresh15MinLols }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Link 15-minute interval threshold reached."
+      ::= { adslAtucTraps 0 6 }
+
+      adslAtucInitFailureTrap NOTIFICATION-TYPE
+          OBJECTS { adslAtucCurrStatus }
+          STATUS  current
+          DESCRIPTION
+              "ATUC initialization failed. See adslAtucCurrStatus
+              for potential reasons."
+      ::= { adslAtucTraps 0 7 }
+
+adslAturTraps OBJECT IDENTIFIER ::= { adslTraps 2 }
+
+      adslAturPerfLofsThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAturPerfCurr15MinLofs,
+                    adslAturThresh15MinLofs }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Framing 15-minute interval threshold reached."
+      ::= { adslAturTraps 0 1 }
+
+      adslAturPerfLossThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAturPerfCurr15MinLoss,
+                    adslAturThresh15MinLoss }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Signal 15-minute interval threshold reached."
+      ::= { adslAturTraps 0 2 }
+
+      adslAturPerfLprsThreshTrap      NOTIFICATION-TYPE
+          OBJECTS { adslAturPerfCurr15MinLprs,
+                    adslAturThresh15MinLprs }
+          STATUS  current
+          DESCRIPTION
+              "Loss of Power 15-minute interval threshold reached."
+      ::= { adslAturTraps 0 3 }
+
+      adslAturPerfESsThreshTrap       NOTIFICATION-TYPE
+          OBJECTS { adslAturPerfCurr15MinESs,
+                    adslAturThresh15MinESs }
+          STATUS  current
+          DESCRIPTION
+              "Errored Second 15-minute interval threshold reached."
+      ::= { adslAturTraps 0 4 }
+
+      adslAturRateChangeTrap  NOTIFICATION-TYPE
+          OBJECTS { adslAturChanCurrTxRate,
+                    adslAturChanPrevTxRate }
+          STATUS  current
+          DESCRIPTION
+              "The ATURs transmit rate has changed (RADSL mode only)"
+      ::= { adslAturTraps 0 5 }
+
+      -- no adslAturPerfLolsThreshTrap possible { 0 6 }
+
+      -- no adslAturInitFailureTrap possible { 0 7 }
+
+-- conformance information
+
+adslConformance OBJECT IDENTIFIER ::= { adslLineMib 3 }
+
+adslGroups OBJECT IDENTIFIER ::= { adslConformance 1 }
+adslCompliances OBJECT IDENTIFIER ::= { adslConformance 2 }
+
+      -- ATU-C agent compliance statements
+
+      adslLineMibAtucCompliance MODULE-COMPLIANCE
+          STATUS  current
+          DESCRIPTION
+              "The compliance statement for SNMP entities
+               which manage ADSL ATU-C interfaces."
+
+          MODULE  -- this module
+          MANDATORY-GROUPS
+             {
+             adslLineGroup, adslPhysicalGroup, adslChannelGroup,
+             adslAtucPhysPerfIntervalGroup,
+             adslAturPhysPerfIntervalGroup, adslLineConfProfileGroup,
+             adslLineAlarmConfProfileGroup,
+             adslLineConfProfileControlGroup
+             }
+
+          GROUP       adslAtucPhysPerfRawCounterGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require continuous ATU-C physical event counters
+               should implement this group."
+
+          GROUP       adslAturPhysPerfRawCounterGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require continuous ATU-R physical event counters
+               should implement this group."
+
+          GROUP       adslAtucChanPerformanceGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require ATU-C channel block event counters should
+               implement this group."
+
+          GROUP       adslAturChanPerformanceGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require ATU-R channel block event counters should
+               implement this group."
+
+          OBJECT      adslLineConfProfile
+          MIN-ACCESS  read-only
+          DESCRIPTION
+              "Read-only access is applicable when static
+               profiles are implemented."
+
+          OBJECT      adslAtucConfRateMode
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfRateChanRatio
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfTargetSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfMaxSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfMinSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfDownshiftSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfUpshiftSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfMinUpshiftTime
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucConfMinDownshiftTime
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucChanConfFastMinTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucChanConfInterleaveMinTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucChanConfFastMaxTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucChanConfInterleaveMaxTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucChanConfMaxInterleaveDelay
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfRateMode
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfRateChanRatio
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfTargetSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfMaxSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfMinSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfDownshiftSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfUpshiftSnrMgn
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfMinUpshiftTime
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturConfMinDownshiftTime
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturChanConfFastMinTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturChanConfInterleaveMinTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturChanConfFastMaxTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturChanConfInterleaveMaxTxRate
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturChanConfMaxInterleaveDelay
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslLineConfProfileRowStatus
+          MIN-ACCESS  read-only
+          DESCRIPTION
+              "Read-only access is applicable only when static
+               profiles are implemented."
+
+          OBJECT      adslLineAlarmConfProfile
+          MIN-ACCESS  read-only
+          DESCRIPTION
+              "Read-only access is applicable only when static
+               profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinLofs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinLoss
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinLols
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinLprs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinESs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshFastRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshInterleaveRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshFastRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshInterleaveRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucInitFailureTrapEnable
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinLofs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinLoss
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinLprs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinESs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshFastRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshInterleaveRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshFastRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshInterleaveRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslLineAlarmConfProfileRowStatus
+          MIN-ACCESS  read-only
+          DESCRIPTION
+              "Read-only access is applicable only when static
+               profiles are implemented."
+      ::= { adslCompliances 1 }
+
+      -- ATU-R agent compliance statements
+
+      adslLineMibAturCompliance MODULE-COMPLIANCE
+          STATUS  current
+          DESCRIPTION
+              "The compliance statement for SNMP entities
+               which manage ADSL ATU-R interfaces."
+
+          MODULE  -- this module
+          MANDATORY-GROUPS
+              {
+              adslAturLineGroup, adslAturPhysicalGroup,
+              adslAturChannelGroup,
+              adslAturAtucPhysPerfIntervalGroup,
+              adslAturAturPhysPerfIntervalGroup,
+              adslAturLineAlarmConfProfileGroup,
+              adslAturLineConfProfileControlGroup
+              }
+
+          GROUP       adslAturAtucPhysPerfRawCounterGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require continuous ATU-C physical event counters
+               should implement this group."
+
+          GROUP       adslAturAturPhysPerfRawCounterGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+
+               require continuous ATU-R physical event counters
+               should implement this group."
+
+          GROUP       adslAturAtucChanPerformanceGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require ATU-C channel block event counters should
+               implement this group."
+
+          GROUP       adslAturAturChanPerformanceGroup
+          DESCRIPTION
+              "This group is optional.  Implementations which
+               require ATU-R channel block event counters should
+               implement this group."
+
+          OBJECT      adslLineAlarmConfProfile
+          MIN-ACCESS  read-only
+          DESCRIPTION
+              "Read-only access is applicable only when static
+               profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinLofs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinLoss
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThresh15MinESs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshFastRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshInterleaveRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucThreshFastRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAtucInitFailureTrapEnable
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinLofs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinLoss
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinLprs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThresh15MinESs
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshFastRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshInterleaveRateUp
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshFastRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslAturThreshInterleaveRateDown
+          MIN-ACCESS  read-write
+          DESCRIPTION
+              "Read-write access is applicable when
+               static profiles are implemented."
+
+          OBJECT      adslLineAlarmConfProfileRowStatus
+          MIN-ACCESS  read-only
+          DESCRIPTION
+              "Read-only access is applicable only when static
+               profiles are implemented."
+
+          OBJECT     adslAtucCurrStatus
+          SYNTAX   BITS {
+                         noDefect(0),
+                         lossOfFraming(1),
+                         lossOfSignal(2)
+                        }
+          DESCRIPTION
+              "It is allowable to implement only noDefect(0),
+              lossOfFraming(1) and lossOfSignal(2) by the ATU-R
+              agent."
+     ::= { adslCompliances 2 }
+
+      -- units of conformance
+      adslLineGroup    OBJECT-GROUP
+          OBJECTS {
+             adslLineCoding, adslLineType, adslLineSpecific
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing configuration
+              information about an ADSL Line."
+      ::= { adslGroups 1 }
+
+      adslPhysicalGroup    OBJECT-GROUP
+          OBJECTS {
+
+             adslAtucInvSerialNumber, adslAtucInvVendorID,
+             adslAtucInvVersionNumber, adslAtucCurrSnrMgn,
+             adslAtucCurrAtn, adslAtucCurrStatus,
+             adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
+             adslAturInvSerialNumber, adslAturInvVendorID,
+             adslAturInvVersionNumber, adslAturCurrSnrMgn,
+             adslAturCurrAtn, adslAturCurrStatus,
+             adslAturCurrOutputPwr, adslAturCurrAttainableRate
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing physical
+              configuration information of the ADSL Line."
+      ::= { adslGroups 2 }
+
+      adslChannelGroup    OBJECT-GROUP
+          OBJECTS {
+             adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
+             adslAtucChanPrevTxRate, adslAtucChanCrcBlockLength,
+             adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
+             adslAturChanPrevTxRate, adslAturChanCrcBlockLength
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing configuration
+              information about an ADSL channel."
+      ::= { adslGroups 3 }
+
+      adslAtucPhysPerfRawCounterGroup OBJECT-GROUP
+          OBJECTS {
+             adslAtucPerfLofs, adslAtucPerfLoss,
+             adslAtucPerfLols, adslAtucPerfLprs,
+             adslAtucPerfESs, adslAtucPerfInits
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing raw performance
+              counts on an ADSL Line (ATU-C end)."
+      ::= { adslGroups 4 }
+
+      adslAtucPhysPerfIntervalGroup OBJECT-GROUP
+          OBJECTS {
+             adslAtucPerfValidIntervals,
+             adslAtucPerfInvalidIntervals,
+             adslAtucPerfCurr15MinTimeElapsed,
+             adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
+             adslAtucPerfCurr15MinLols, adslAtucPerfCurr15MinLprs,
+             adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
+             adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
+             adslAtucPerfCurr1DayLols, adslAtucPerfCurr1DayLprs,
+             adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
+             adslAtucPerfPrev1DayMoniSecs,
+             adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
+             adslAtucPerfPrev1DayLols, adslAtucPerfPrev1DayLprs,
+             adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
+             adslAtucIntervalLofs, adslAtucIntervalLoss,
+             adslAtucIntervalLols, adslAtucIntervalLprs,
+             adslAtucIntervalESs, adslAtucIntervalInits,
+             adslAtucIntervalValidData
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing current 15-minute,
+              1-day; and previous 1-day performance counts on
+              ADSL Line (ATU-C end) ."
+      ::= { adslGroups 5 }
+
+      adslAturPhysPerfRawCounterGroup OBJECT-GROUP
+          OBJECTS {
+             adslAturPerfLofs, adslAturPerfLoss,
+             adslAturPerfLprs, adslAturPerfESs
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing raw performance
+              counts on an ADSL Line (ATU-R end)."
+      ::= { adslGroups 6 }
+
+      adslAturPhysPerfIntervalGroup OBJECT-GROUP
+          OBJECTS {
+             adslAturPerfValidIntervals,
+             adslAturPerfInvalidIntervals,
+             adslAturPerfCurr15MinTimeElapsed,
+             adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
+             adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
+             adslAturPerfCurr1DayTimeElapsed,
+             adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
+             adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
+             adslAturPerfPrev1DayMoniSecs,
+             adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
+             adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
+             adslAturIntervalLofs,
+             adslAturIntervalLoss, adslAturIntervalLprs,
+             adslAturIntervalESs, adslAturIntervalValidData
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing current 15-minute,
+              1-day; and previous 1-day performance counts on
+              ADSL Line (ATU-R end)."
+      ::= { adslGroups 7 }
+
+      adslAtucChanPerformanceGroup OBJECT-GROUP
+          OBJECTS {
+             adslAtucChanReceivedBlks,
+             adslAtucChanTransmittedBlks,
+             adslAtucChanCorrectedBlks,
+             adslAtucChanUncorrectBlks,
+             adslAtucChanPerfValidIntervals,
+             adslAtucChanPerfInvalidIntervals,
+             adslAtucChanPerfCurr15MinTimeElapsed,
+             adslAtucChanPerfCurr15MinReceivedBlks,
+             adslAtucChanPerfCurr15MinTransmittedBlks,
+             adslAtucChanPerfCurr15MinCorrectedBlks,
+             adslAtucChanPerfCurr15MinUncorrectBlks,
+             adslAtucChanPerfCurr1DayTimeElapsed,
+             adslAtucChanPerfCurr1DayReceivedBlks,
+             adslAtucChanPerfCurr1DayTransmittedBlks,
+             adslAtucChanPerfCurr1DayCorrectedBlks,
+             adslAtucChanPerfCurr1DayUncorrectBlks,
+             adslAtucChanPerfPrev1DayMoniSecs,
+             adslAtucChanPerfPrev1DayReceivedBlks,
+             adslAtucChanPerfPrev1DayTransmittedBlks,
+             adslAtucChanPerfPrev1DayCorrectedBlks,
+             adslAtucChanPerfPrev1DayUncorrectBlks,
+             adslAtucChanIntervalReceivedBlks,
+             adslAtucChanIntervalTransmittedBlks,
+             adslAtucChanIntervalCorrectedBlks,
+             adslAtucChanIntervalUncorrectBlks,
+             adslAtucChanIntervalValidData
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing channel block
+              performance information on an ADSL channel
+              (ATU-C end)."
+      ::= { adslGroups 8 }
+
+      adslAturChanPerformanceGroup OBJECT-GROUP
+          OBJECTS {
+             adslAturChanReceivedBlks,
+             adslAturChanTransmittedBlks,
+             adslAturChanCorrectedBlks,
+             adslAturChanUncorrectBlks,
+             adslAturChanPerfValidIntervals,
+             adslAturChanPerfInvalidIntervals,
+             adslAturChanPerfCurr15MinTimeElapsed,
+             adslAturChanPerfCurr15MinReceivedBlks,
+             adslAturChanPerfCurr15MinTransmittedBlks,
+             adslAturChanPerfCurr15MinCorrectedBlks,
+             adslAturChanPerfCurr15MinUncorrectBlks,
+             adslAturChanPerfCurr1DayTimeElapsed,
+             adslAturChanPerfCurr1DayReceivedBlks,
+             adslAturChanPerfCurr1DayTransmittedBlks,
+             adslAturChanPerfCurr1DayCorrectedBlks,
+             adslAturChanPerfCurr1DayUncorrectBlks,
+             adslAturChanPerfPrev1DayMoniSecs,
+             adslAturChanPerfPrev1DayReceivedBlks,
+             adslAturChanPerfPrev1DayTransmittedBlks,
+             adslAturChanPerfPrev1DayCorrectedBlks,
+             adslAturChanPerfPrev1DayUncorrectBlks,
+             adslAturChanIntervalReceivedBlks,
+             adslAturChanIntervalTransmittedBlks,
+             adslAturChanIntervalCorrectedBlks,
+             adslAturChanIntervalUncorrectBlks,
+             adslAturChanIntervalValidData
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing channel block
+              performance information on an ADSL channel
+              (ATU-C end)."
+      ::= { adslGroups 9 }
+
+      adslLineConfProfileGroup OBJECT-GROUP
+          OBJECTS {
+             adslAtucConfRateMode, adslAtucConfRateChanRatio,
+             adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn,
+             adslAtucConfMinSnrMgn,
+             adslAtucConfDownshiftSnrMgn,
+             adslAtucConfUpshiftSnrMgn,
+             adslAtucConfMinUpshiftTime,
+             adslAtucConfMinDownshiftTime,
+             adslAtucChanConfFastMinTxRate,
+             adslAtucChanConfInterleaveMinTxRate,
+             adslAtucChanConfFastMaxTxRate,
+             adslAtucChanConfInterleaveMaxTxRate,
+             adslAtucChanConfMaxInterleaveDelay,
+             adslAturConfRateMode, adslAturConfRateChanRatio,
+             adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn,
+             adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn,
+             adslAturConfUpshiftSnrMgn,
+             adslAturConfMinUpshiftTime,
+             adslAturConfMinDownshiftTime,
+             adslAturChanConfFastMinTxRate,
+             adslAturChanConfInterleaveMinTxRate,
+             adslAturChanConfFastMaxTxRate,
+             adslAturChanConfInterleaveMaxTxRate,
+             adslAturChanConfMaxInterleaveDelay
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing provisioning
+              information about an ADSL Line."
+      ::= { adslGroups 10 }
+
+      adslLineAlarmConfProfileGroup OBJECT-GROUP
+          OBJECTS {
+             adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
+             adslAtucThresh15MinLols, adslAtucThresh15MinLprs,
+             adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
+             adslAtucThreshInterleaveRateUp,
+             adslAtucThreshFastRateDown,
+             adslAtucThreshInterleaveRateDown,
+             adslAtucInitFailureTrapEnable,
+             adslAturThresh15MinLofs, adslAturThresh15MinLoss,
+             adslAturThresh15MinLprs, adslAturThresh15MinESs,
+             adslAturThreshFastRateUp,
+             adslAturThreshInterleaveRateUp,
+             adslAturThreshFastRateDown,
+             adslAturThreshInterleaveRateDown
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing alarm provisioning
+              information about an ADSL Line."
+      ::= { adslGroups 11 }
+
+      adslLineConfProfileControlGroup OBJECT-GROUP
+          OBJECTS {
+             adslLineConfProfile, adslLineAlarmConfProfile,
+             adslLineConfProfileRowStatus,
+             adslLineAlarmConfProfileRowStatus
+             }
+          STATUS     current
+          DESCRIPTION
+              "A collection of objects providing profile
+              control for the ADSL system."
+      ::= { adslGroups 12 }
+
+      adslNotificationsGroup NOTIFICATION-GROUP
+          NOTIFICATIONS {
+             adslAtucPerfLofsThreshTrap,
+             adslAtucPerfLossThreshTrap,
+             adslAtucPerfLprsThreshTrap,
+             adslAtucPerfESsThreshTrap,
+             adslAtucRateChangeTrap,
+             adslAtucPerfLolsThreshTrap,
+             adslAtucInitFailureTrap,
+             adslAturPerfLofsThreshTrap,
+             adslAturPerfLossThreshTrap,
+             adslAturPerfLprsThreshTrap,
+             adslAturPerfESsThreshTrap,
+             adslAturRateChangeTrap
+             }
+          STATUS        current
+          DESCRIPTION
+              "The collection of adsl notifications."
+      ::= { adslGroups 13 }
+
+-- units of conformance for ATU-R agent
+
+         adslAturLineGroup    OBJECT-GROUP
+             OBJECTS {
+                adslLineCoding
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing configuration
+                 information about an ADSL Line on the ATU-R side."
+         ::= { adslGroups 14 }
+
+         adslAturPhysicalGroup    OBJECT-GROUP
+             OBJECTS {
+                adslAtucInvVendorID,
+                adslAtucInvVersionNumber,
+                adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
+                adslAturInvSerialNumber, adslAturInvVendorID,
+                adslAturInvVersionNumber, adslAturCurrSnrMgn,
+                adslAturCurrAtn, adslAturCurrStatus,
+                adslAturCurrOutputPwr, adslAturCurrAttainableRate,
+                adslAtucCurrStatus
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing physical
+                 configuration information of the ADSL Line on the
+                 ATU-R side."
+         ::= { adslGroups 15 }
+
+         adslAturChannelGroup    OBJECT-GROUP
+             OBJECTS {
+                adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
+                adslAtucChanPrevTxRate,
+                adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
+                adslAturChanPrevTxRate, adslAturChanCrcBlockLength
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing configuration
+                information about an ADSL channel on the ATU-R
+                side."
+         ::= { adslGroups 16 }
+
+         adslAturAtucPhysPerfRawCounterGroup OBJECT-GROUP
+             OBJECTS {
+                adslAtucPerfLofs, adslAtucPerfLoss,
+                adslAtucPerfESs, adslAtucPerfInits
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing raw performance
+                counts on an ADSL Line (ATU-C end) provided by the
+                ATU-R agent."
+         ::= { adslGroups 17 }
+
+         adslAturAtucPhysPerfIntervalGroup OBJECT-GROUP
+             OBJECTS {
+                adslAtucPerfValidIntervals,
+                adslAtucPerfInvalidIntervals,
+                adslAtucPerfCurr15MinTimeElapsed,
+                adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
+                adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
+                adslAtucPerfCurr1DayTimeElapsed,
+                adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
+                adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
+                adslAtucPerfPrev1DayMoniSecs,
+                adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
+                adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
+                adslAtucIntervalLofs, adslAtucIntervalLoss,
+                adslAtucIntervalESs, adslAtucIntervalInits,
+                adslAtucIntervalValidData
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing current
+
+                15-minute, 1-day; and previous 1-day performance
+                counts on ADSL Line (ATU-C end) provided by the
+                ATU-R agent."
+         ::= { adslGroups 18 }
+
+         adslAturAturPhysPerfRawCounterGroup OBJECT-GROUP
+             OBJECTS {
+                adslAturPerfLofs, adslAturPerfLoss,
+                adslAturPerfLprs, adslAturPerfESs
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing raw performance
+                counts on an ADSL Line (ATU-R end) provided by the
+                ATU-R agent."
+         ::= { adslGroups 19 }
+
+         adslAturAturPhysPerfIntervalGroup OBJECT-GROUP
+             OBJECTS {
+                adslAturPerfValidIntervals,
+                adslAturPerfInvalidIntervals,
+                adslAturPerfCurr15MinTimeElapsed,
+                adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
+                adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
+                adslAturPerfCurr1DayTimeElapsed,
+                adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
+                adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
+                adslAturPerfPrev1DayMoniSecs,
+                adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
+                adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
+                adslAturIntervalLofs,
+                adslAturIntervalLoss, adslAturIntervalLprs,
+                adslAturIntervalESs, adslAturIntervalValidData
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing current
+                15-minute, 1-day; and previous 1-day performance
+                counts on ADSL Line (ATU-R end) provided by the
+                ATU-R agent."
+         ::= { adslGroups 20 }
+
+         adslAturAtucChanPerformanceGroup OBJECT-GROUP
+             OBJECTS {
+                adslAtucChanReceivedBlks,
+                adslAtucChanTransmittedBlks,
+                adslAtucChanCorrectedBlks,
+                adslAtucChanUncorrectBlks,
+                adslAtucChanPerfCurr15MinTimeElapsed,
+                adslAtucChanPerfCurr15MinReceivedBlks,
+                adslAtucChanPerfCurr15MinTransmittedBlks,
+                adslAtucChanPerfCurr15MinCorrectedBlks,
+                adslAtucChanPerfCurr15MinUncorrectBlks,
+                adslAtucChanPerfCurr1DayTimeElapsed,
+                adslAtucChanPerfCurr1DayReceivedBlks,
+                adslAtucChanPerfCurr1DayTransmittedBlks,
+                adslAtucChanPerfCurr1DayCorrectedBlks,
+                adslAtucChanPerfCurr1DayUncorrectBlks,
+                adslAtucChanPerfPrev1DayMoniSecs,
+                adslAtucChanPerfPrev1DayReceivedBlks,
+                adslAtucChanPerfPrev1DayTransmittedBlks,
+                adslAtucChanPerfPrev1DayCorrectedBlks,
+                adslAtucChanPerfPrev1DayUncorrectBlks,
+                adslAtucChanPerfValidIntervals,
+                adslAtucChanPerfInvalidIntervals,
+                adslAtucChanIntervalReceivedBlks,
+                adslAtucChanIntervalTransmittedBlks,
+                adslAtucChanIntervalCorrectedBlks,
+                adslAtucChanIntervalUncorrectBlks,
+                adslAtucChanIntervalValidData
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing channel block
+                 performance information on an ADSL channel
+                 (ATU-C end) provided by the ATU-R agent."
+         ::= { adslGroups 21 }
+
+         adslAturAturChanPerformanceGroup OBJECT-GROUP
+             OBJECTS {
+                adslAturChanReceivedBlks,
+                adslAturChanTransmittedBlks,
+                adslAturChanCorrectedBlks,
+                adslAturChanUncorrectBlks,
+                adslAturChanPerfValidIntervals,
+                adslAturChanPerfInvalidIntervals,
+                adslAturChanPerfCurr15MinTimeElapsed,
+                adslAturChanPerfCurr15MinReceivedBlks,
+                adslAturChanPerfCurr15MinTransmittedBlks,
+                adslAturChanPerfCurr15MinCorrectedBlks,
+                adslAturChanPerfCurr15MinUncorrectBlks,
+                adslAturChanPerfCurr1DayTimeElapsed,
+                adslAturChanPerfCurr1DayReceivedBlks,
+                adslAturChanPerfCurr1DayTransmittedBlks,
+                adslAturChanPerfCurr1DayCorrectedBlks,
+                adslAturChanPerfCurr1DayUncorrectBlks,
+                adslAturChanPerfPrev1DayMoniSecs,
+                adslAturChanPerfPrev1DayReceivedBlks,
+                adslAturChanPerfPrev1DayTransmittedBlks,
+                adslAturChanPerfPrev1DayCorrectedBlks,
+                adslAturChanPerfPrev1DayUncorrectBlks,
+                adslAturChanIntervalReceivedBlks,
+                adslAturChanIntervalTransmittedBlks,
+                adslAturChanIntervalCorrectedBlks,
+                adslAturChanIntervalUncorrectBlks,
+                adslAturChanIntervalValidData
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing channel block
+                 performance information on an ADSL channel
+                 (ATU-R end) provided by the ATU-R agent."
+         ::= { adslGroups 22 }
+
+         adslAturLineAlarmConfProfileGroup OBJECT-GROUP
+             OBJECTS {
+                adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
+                adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
+                adslAtucThreshInterleaveRateUp,
+                adslAtucThreshFastRateDown,
+                adslAtucThreshInterleaveRateDown,
+                adslAtucInitFailureTrapEnable,
+                adslAturThresh15MinLofs, adslAturThresh15MinLoss,
+                adslAturThresh15MinLprs, adslAturThresh15MinESs,
+                adslAturThreshFastRateUp,
+                adslAturThreshInterleaveRateUp,
+                adslAturThreshFastRateDown,
+                adslAturThreshInterleaveRateDown
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing alarm
+provisioning
+                 information about an ADSL Line provided by the
+                 ATU-R agent."
+         ::= { adslGroups 23 }
+
+         adslAturLineConfProfileControlGroup OBJECT-GROUP
+             OBJECTS {
+                adslLineAlarmConfProfile,
+                adslLineAlarmConfProfileRowStatus
+                }
+             STATUS     current
+             DESCRIPTION
+                 "A collection of objects providing profile
+                 control for the ADSL system by the ATU-R agent."
+         ::= { adslGroups 24 }
+
+         adslAturNotificationsGroup NOTIFICATION-GROUP
+             NOTIFICATIONS {
+                 adslAtucPerfLofsThreshTrap,
+                 adslAtucPerfLossThreshTrap,
+                 adslAtucPerfESsThreshTrap,
+                 adslAtucRateChangeTrap,
+                 adslAturPerfLofsThreshTrap,
+                 adslAturPerfLossThreshTrap,
+                 adslAturPerfLprsThreshTrap,
+                 adslAturPerfESsThreshTrap,
+                 adslAturRateChangeTrap
+                 }
+             STATUS        current
+             DESCRIPTION
+                 "The collection of ADSL notifications implemented by
+                 the ATU-R agent."
+         ::= { adslGroups 25 }
+
+END
diff --git a/snmp_builder/mibs/ADSL-TC-MIB.mib b/snmp_builder/mibs/ADSL-TC-MIB.mib
new file mode 100644
index 0000000..3f0d11c
--- /dev/null
+++ b/snmp_builder/mibs/ADSL-TC-MIB.mib
@@ -0,0 +1,113 @@
+ADSL-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    transmission,
+    MODULE-IDENTITY, Gauge32            FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                  FROM SNMPv2-TC;
+
+adsltcmib MODULE-IDENTITY
+
+LAST-UPDATED "9908190000Z"
+
+ORGANIZATION "IETF ADSL MIB Working Group"
+
+CONTACT-INFO
+    "
+    Gregory Bathrick
+    AG Communication Systems
+    A Subsidiary of Lucent Technologies
+    2500 W Utopia Rd.
+    Phoenix, AZ 85027 USA
+    Tel: +1 602-582-7679
+    Fax: +1 602-582-7697
+    E-mail: bathricg@agcs.com
+
+    Faye Ly
+    Copper Mountain Networks
+    Norcal Office
+    2470 Embarcadero Way
+    Palo Alto, CA 94303
+    Tel: +1 650-858-8500
+    Fax: +1 650-858-8085
+    E-Mail: faye@coppermountain.com
+
+    IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
+    "
+    DESCRIPTION
+        "The MIB module which provides a ADSL
+        Line Coding Textual Convention to be used
+        by ADSL Lines."
+
+    --  Revision history
+    REVISION     "9908190000Z"  -- 19 August 1999, midnight
+    DESCRIPTION  "Initial Version, published as RFC 2662"
+    ::= { transmission 94 2 } -- adslMIB 2
+
+    AdslLineCodingType ::= TEXTUAL-CONVENTION
+        STATUS       current
+        DESCRIPTION
+            "This data type is used as the syntax for the ADSL
+            Line Code."
+        SYNTAX  INTEGER {
+            other(1),-- none of the following
+            dmt (2), -- Discrete MultiTone
+            cap (3), -- Carrierless Amplitude & Phase modulation
+            qam (4)  -- Quadrature Amplitude Modulation
+        }
+
+    AdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "A counter associated with interface performance
+            measurements in a current 1-day (24 hour) measurement
+            interval.
+
+            The value of this counter starts at zero at the
+            beginning of an interval and is increased when
+            associated events occur, until the end of the
+            1-day interval.  At that time the value of the
+            counter is stored in the previous 1-day history
+            interval, if available, and the current interval
+            counter is restarted at zero.
+
+            In the case where the agent has no valid data available
+            for this interval the corresponding object
+            instance is not available and upon a retrieval
+            request a corresponding error message shall be
+            returned to indicate that this instance does
+            not exist (for example, a noSuchName error for
+            SNMPv1 and a noSuchInstance for SNMPv2 GET
+            operation)."
+         SYNTAX  Gauge32
+
+    AdslPerfPrevDayCount ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "A counter associated with interface performance
+            measurements during the most previous 1-day (24 hour)
+            measurement interval.  The value of this counter is
+            equal to the value of the current day counter at
+            the end of its most recent interval.
+
+            In the case where the agent has no valid data available
+            for this interval the corresponding object
+            instance is not available and upon a retrieval
+            request a corresponding error message shall be
+            returned to indicate that this instance does
+            not exist (for example, a noSuchName error for
+            SNMPv1 and a noSuchInstance for SNMPv2 GET
+            operation)."
+        SYNTAX  Gauge32
+
+    AdslPerfTimeElapsed ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "The number of seconds that have elapsed since
+            the beginning of the current measurement period.
+            If, for some reason, such as an adjustment in the
+            system's time-of-day clock, the current interval
+            exceeds the maximum value, the agent will return
+            the maximum value."
+        SYNTAX  Gauge32
+
+END
diff --git a/snmp_builder/mibs/ADSL2-LINE-MIB.mib b/snmp_builder/mibs/ADSL2-LINE-MIB.mib
new file mode 100644
index 0000000..e707019
--- /dev/null
+++ b/snmp_builder/mibs/ADSL2-LINE-MIB.mib
@@ -0,0 +1,5476 @@
+ADSL2-LINE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY,
+   OBJECT-TYPE,
+   transmission,
+   Unsigned32,
+   NOTIFICATION-TYPE,
+   Integer32,
+   Counter32
+      FROM SNMPv2-SMI
+
+   ifIndex
+      FROM IF-MIB
+
+   TruthValue,
+   RowStatus
+      FROM SNMPv2-TC
+
+   SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB
+
+   HCPerfIntervalThreshold,
+   HCPerfTimeElapsed
+      FROM  HC-PerfHist-TC-MIB   -- [RFC3705]
+
+   Adsl2Unit,
+   Adsl2Direction,
+   Adsl2TransmissionModeType,
+   Adsl2RaMode,
+   Adsl2InitResult,
+   Adsl2OperationModes,
+   Adsl2PowerMngState,
+   Adsl2ConfPmsForce,
+   Adsl2LConfProfPmMode,
+   Adsl2LineLdsf,
+   Adsl2LdsfResult,
+   Adsl2SymbolProtection,
+   Adsl2MaxBer,
+   Adsl2ScMaskDs,
+   Adsl2ScMaskUs,
+   Adsl2RfiDs,
+   Adsl2PsdMaskDs,
+   Adsl2PsdMaskUs,
+   Adsl2Tssi,
+   Adsl2LastTransmittedState,
+   Adsl2LineStatus,
+   Adsl2ChAtmStatus,
+   Adsl2ChPtmStatus
+          FROM   ADSL2-LINE-TC-MIB       -- [This document]
+
+   MODULE-COMPLIANCE,
+   OBJECT-GROUP,
+   NOTIFICATION-GROUP
+      FROM SNMPv2-CONF;
+
+adsl2MIB MODULE-IDENTITY
+   LAST-UPDATED "200610040000Z" -- October 4th, 2006
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+   Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+             Chair:     Mike Sneed
+                        Sand Channel Systems
+             Postal:    P.O. Box 37324
+                        Raleigh NC 27627-732
+             Email:     sneedmike@hotmail.com
+             Phone:     +1 206 600 7022
+
+             Co-Chair & Co-editor:
+                        Menachem Dodge
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     mbdodge@ieee.org
+             Phone:     +972 3 926 8421
+
+             Co-editor: Moti Morgenstern
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     moti.morgenstern@ecitele.com
+             Phone:     +972 3 926 6258
+
+             Co-editor: Scott Baillie
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     scott.baillie@nec.com.au
+             Phone:     +61 3 9264 3986
+
+             Co-editor: Umberto Bonollo
+
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     umberto.bonollo@nec.com.au
+             Phone:     +61 3 9264 3385
+            "
+   DESCRIPTION
+        "
+         This document defines a Management Information Base (MIB)
+         module for use with network management protocols in the
+         Internet community for the purpose of managing ADSL, ADSL2,
+         and ADSL2+ lines.  The MIB module described in RFC 2662
+         [RFC2662] describes objects used for managing Asymmetric
+         Bit-Rate DSL (ADSL) interfaces per [T1E1.413], [G.992.1],
+         and [G.992.2].  These object descriptions are based upon the
+         specifications for the ADSL Embedded Operations Channel
+         (EOC) as defined in American National Standards Institute
+         (ANSI) T1E1.413/1995 [T1E1.413] and International
+         Telecommunication Union (ITU-T) G.992.1  [G.992.1] and
+         G.992.2 [G.992.2].
+
+         This document does not obsolete RFC 2662 [RFC2662], but
+         rather provides a more comprehensive management model that
+         includes the ADSL2 and ADSL2+ technologies per G.992.3,
+         G.992.4, and G.992.5 ([G.992.3], [G.992.4], and [G.992.5],
+         respectively).  In addition, objects have been added to
+         improve the management of ADSL, ADSL2, and ADSL2+ lines.
+
+        Additionally, the management framework for New Generation
+        ADSL lines specified by the Digital Subscriber Line Forum
+        (DSLF) has been taken into consideration [TR-90].  That
+        framework is based on ITU-T G.997.1 standard [G.997.1] as
+        well as two amendments: [G.997.1am1] and [G.997.1am2].
+
+        Note that the revised ITU-T G.997.1 standard also refers to
+        the next generation of VDSL technology, known as VDSL2, per
+        ITU-T G.993.2 [G.993.2].  However, managing VDSL2 lines is
+        currently beyond the scope of this document.
+
+        The MIB module is located in the MIB tree under MIB 2
+        transmission, as discussed in the IANA Considerations section
+        of this document.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4706: see the RFC itself for
+        full legal notices."
+
+   REVISION "200610040000Z" -- October 4th, 2006
+   DESCRIPTION "Initial version, published as RFC 4706."
+      ::= { transmission 238 }
+
+  adsl2            OBJECT IDENTIFIER ::= { adsl2MIB 1 }
+  ------------------------------------------------
+  adsl2Line          OBJECT IDENTIFIER ::= { adsl2 1 }
+  adsl2Status        OBJECT IDENTIFIER ::= { adsl2 2 }
+  adsl2Inventory     OBJECT IDENTIFIER ::= { adsl2 3 }
+  adsl2PM            OBJECT IDENTIFIER ::= { adsl2 4 }
+  adsl2Profile       OBJECT IDENTIFIER ::= { adsl2 5 }
+  adsl2Scalar        OBJECT IDENTIFIER ::= { adsl2 6 }
+  adsl2Notifications OBJECT IDENTIFIER ::= { adsl2 0 }
+  adsl2Conformance   OBJECT IDENTIFIER ::= { adsl2 7 }
+  ------------------------------------------------
+  adsl2PMLine      OBJECT IDENTIFIER ::= { adsl2PM 1 }
+  adsl2PMChannel   OBJECT IDENTIFIER ::= { adsl2PM 2 }
+  ------------------------------------------------
+  adsl2ProfileLine      OBJECT IDENTIFIER ::= { adsl2Profile 1 }
+  adsl2ProfileChannel   OBJECT IDENTIFIER ::= { adsl2Profile 2 }
+  adsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { adsl2Profile 3 }
+  ------------------------------------------------
+  adsl2ScalarSC         OBJECT IDENTIFIER ::= { adsl2Scalar 1 }
+  ------------------------------------------------
+
+------------------------------------------------
+--          adsl2LineTable                    --
+------------------------------------------------
+adsl2LineTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2LineEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineTable contains configuration,
+       command, and status parameters of the ADSL2 line.
+       The index of this table is an interface index where the
+       interface has an ifType of adsl2plus(238).
+
+       Several objects in this table MUST be maintained in a
+       persistent manner."
+   ::= { adsl2Line 1 }
+
+adsl2LineEntry  OBJECT-TYPE
+   SYNTAX      Adsl2LineEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineTable contains configuration,
+      commands, and status parameters of the ADSL2 line"
+   INDEX  { ifIndex }
+   ::= { adsl2LineTable 1 }
+
+Adsl2LineEntry  ::=
+   SEQUENCE {
+      adsl2LineCnfgTemplate            SnmpAdminString,
+      adsl2LineAlarmCnfgTemplate       SnmpAdminString,
+      adsl2LineCmndConfPmsf            Adsl2ConfPmsForce,
+      adsl2LineCmndConfLdsf            Adsl2LineLdsf,
+      adsl2LineCmndConfLdsfFailReason  Adsl2LdsfResult,
+      adsl2LineCmndAutomodeColdStart   TruthValue,
+      adsl2LineStatusAtuTransSys       Adsl2TransmissionModeType,
+      adsl2LineStatusPwrMngState       Adsl2PowerMngState,
+      adsl2LineStatusInitResult        Adsl2InitResult,
+      adsl2LineStatusLastStateDs       Adsl2LastTransmittedState,
+      adsl2LineStatusLastStateUs       Adsl2LastTransmittedState,
+      adsl2LineStatusAtur              Adsl2LineStatus,
+      adsl2LineStatusAtuc              Adsl2LineStatus,
+      adsl2LineStatusLnAttenDs         Unsigned32,
+      adsl2LineStatusLnAttenUs         Unsigned32,
+      adsl2LineStatusSigAttenDs        Unsigned32,
+      adsl2LineStatusSigAttenUs        Unsigned32,
+      adsl2LineStatusSnrMarginDs       Integer32,
+      adsl2LineStatusSnrMarginUs       Integer32,
+      adsl2LineStatusAttainableRateDs  Unsigned32,
+      adsl2LineStatusAttainableRateUs  Unsigned32,
+      adsl2LineStatusActPsdDs          Integer32,
+      adsl2LineStatusActPsdUs          Integer32,
+      adsl2LineStatusActAtpDs          Integer32,
+      adsl2LineStatusActAtpUs          Integer32
+   }
+
+adsl2LineCnfgTemplate  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2 Line
+       Configuration Templates Table, (adsl2LineConfTemplateTable),
+       which applies for this ADSL2 line.
+
+       This object MUST be maintained in a persistent manner."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.1.1"
+   DEFVAL       { "DEFVAL" }
+   ::= { adsl2LineEntry 1 }
+
+adsl2LineAlarmCnfgTemplate  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2 Line
+      Alarm Configuration Template Table,
+      (adsl2LineAlarmConfTemplateTable), which applies to this ADSL2
+      line.
+
+      This object MUST be maintained in a persistent manner."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.1.1"
+   DEFVAL       { "DEFVAL" }
+   ::= { adsl2LineEntry 2 }
+
+adsl2LineCmndConfPmsf  OBJECT-TYPE
+   SYNTAX      Adsl2ConfPmsForce
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "Power management state forced.  Defines the line states to be
+       forced by the near-end ATU on this line.  The various possible
+       values are:
+          l3toL0(0),
+          l0toL2(2), or
+          l0orL2toL3(3).
+
+       This object MUST be maintained in a persistent manner."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.3"
+   DEFVAL       { l3toL0 }
+   ::= { adsl2LineEntry 3 }
+
+adsl2LineCmndConfLdsf  OBJECT-TYPE
+   SYNTAX      Adsl2LineLdsf
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "Loop diagnostics mode forced (LDSF).  Defines whether the line
+       should be forced into the loop diagnostics mode by the
+       near-end ATU on this line or only be responsive to loop
+       diagnostics initiated by the far-end ATU.
+
+       This object MUST be maintained in a persistent manner.
+       However, in case the operator forces loop diagnostics mode
+       then the access node should reset the object (inhibit) when
+       loop diagnostics mode procedures are completed."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.8"
+   DEFVAL       { inhibit }
+   ::= { adsl2LineEntry 4 }
+
+adsl2LineCmndConfLdsfFailReason  OBJECT-TYPE
+   SYNTAX      Adsl2LdsfResult
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The status of the recent occasion the Loop diagnostics mode
+       forced (LDSF) was issued for the associated line.  Possible
+       values are:
+          none(1)         - The default value in case LDSF was never
+                            requested for the associated line.
+          success(2)      - The recent command completed
+                            successfully.
+          inProgress(3)   - The Loop Diagnostics process is in
+                            progress.
+          unsupported(4)  - The NE or the line card doesn't support
+                            LDSF.
+          cannotRun(5)    - The NE cannot initiate the command, due
+                            to a nonspecific reason.
+          aborted(6)      - The Loop Diagnostics process aborted.
+          failed(7)       - The Loop Diagnostics process failed.
+          illegalMode(8)  - The NE cannot initiate the command, due
+                            to the specific mode of the relevant
+                            line.
+          adminUp(9)      - The NE cannot initiate the command, as
+                            the relevant line is administratively
+                            'Up'.
+          tableFull(10)   - The NE cannot initiate the command, due
+                            to reaching the maximum number of rows
+                            in the results table.
+          noResources(11) - The NE cannot initiate the command, due
+                            to lack of internal memory resources."
+   DEFVAL       { none }
+   ::= { adsl2LineEntry 5 }
+
+   adsl2LineCmndAutomodeColdStart   OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "Automode cold start forced.  This parameter is defined
+          in order to improve testing of the performance of ATUs
+          supporting automode when it is enabled in the MIB.
+          Change the value of this parameter to 'true' indicates
+          a change in loop conditions applied to the devices under
+          test.  The ATUs shall reset any historical information
+          used for automode and for shortening G.994.1 handshake
+
+          and initialization.
+
+          Automode is the case where multiple operation-modes are
+          enabled through the adsl2LConfProfAtuTransSysEna object
+          in the line configuration profile being used for the
+          ADSL line, and where the selection of the actual
+          operation-mode depends not only on the common
+          capabilities of both ATUs (as exchanged in G.994.1), but
+          also on achievable data rates under given loop
+          conditions.
+
+          This object MUST be maintained in a persistent manner."
+      REFERENCE    "ITU-T G.997.1 (amendment 1), 7.3.1.1.10"
+      DEFVAL       { false }
+      ::= { adsl2LineEntry 6 }
+
+adsl2LineStatusAtuTransSys  OBJECT-TYPE
+   SYNTAX      Adsl2TransmissionModeType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU Transmission System (ATS) in use.
+       It is coded in a bit-map representation with only a single bit
+       set to '1' (the selected coding for the ADSL line).  This
+       parameter may be derived from the handshaking procedures
+       defined in Recommendation G.994.1.  A set of ADSL2 line
+       transmission modes, with one bit per mode."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.1"
+   ::= { adsl2LineEntry 7 }
+
+adsl2LineStatusPwrMngState  OBJECT-TYPE
+   SYNTAX      Adsl2PowerMngState
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The current power management state.  One of four possible
+       power management states:
+          L0 - Synchronized and full transmission (i.e., Showtime).
+          L1 - Low Power with reduced net data rate (G.992.2 only).
+          L2 - Low Power with reduced net data rate (G.992.3 and
+               G.992.4 only).
+          L3 - No power.
+      The various possible values are: l0(1), l1(2), l2(3), or
+      l3(4)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.2"
+      ::= { adsl2LineEntry 8 }
+
+adsl2LineStatusInitResult  OBJECT-TYPE
+   SYNTAX      Adsl2InitResult
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates the result of the last full initialization performed
+       on the line.  It is an enumeration type with the following
+       values: noFail(0), configError(1), configNotFeasible(2),
+       commFail(3), noPeerAtu(4), or otherCause(5)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.3"
+   ::= { adsl2LineEntry 9 }
+
+adsl2LineStatusLastStateDs  OBJECT-TYPE
+   SYNTAX      Adsl2LastTransmittedState
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The last successful transmitted initialization state in
+       the downstream direction in the last full initialization
+       performed on the line."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.4"
+   ::= { adsl2LineEntry 10 }
+
+adsl2LineStatusLastStateUs  OBJECT-TYPE
+   SYNTAX      Adsl2LastTransmittedState
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The last successful transmitted initialization state in the
+       upstream direction in the last full initialization performed
+       on the line."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.5"
+   ::= { adsl2LineEntry 11 }
+
+adsl2LineStatusAtur  OBJECT-TYPE
+   SYNTAX      Adsl2LineStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates current state (existing failures) of the ATU-R.
+       This is a bit-map of possible conditions."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.1.1.2"
+   ::= { adsl2LineEntry 12 }
+
+adsl2LineStatusAtuc  OBJECT-TYPE
+   SYNTAX      Adsl2LineStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates current state (existing failures) of the ATU-C.
+       This is a bit-map of possible conditions."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.1.1.1"
+   ::= { adsl2LineEntry 13 }
+
+adsl2LineStatusLnAttenDs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The measured difference in the total power transmitted by the
+       ATU-C and the total power received by the ATU-R over all sub-
+       carriers during diagnostics mode and initialization.  It
+       ranges from 0 to 1270 units of 0.1 dB (physical values
+       are 0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.6"
+   ::= { adsl2LineEntry 14 }
+
+adsl2LineStatusLnAttenUs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The measured difference in the total power transmitted by the
+       ATU-R and the total power received by the ATU-C over all sub-
+       carriers during diagnostics mode and initialization.
+       It ranges from 0 to 1270 units of 0.1 dB (physical values are
+       0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.7"
+   ::= { adsl2LineEntry 15 }
+
+adsl2LineStatusSigAttenDs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The measured difference in the total power transmitted by the
+       ATU-C and the total power received by the ATU-R over all sub-
+       carriers during Showtime.  It ranges from 0 to 1270 units of
+       0.1 dB (physical values are 0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the
+       signal attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the
+       signal attenuation measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.8"
+   ::= { adsl2LineEntry 16 }
+
+adsl2LineStatusSigAttenUs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The measured difference in the total power transmitted by the
+       ATU-R and the total power received by the ATU-C over all sub-
+       carriers during Showtime.  It ranges from 0 to 1270 units of
+       0.1 dB (physical values are 0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the
+       signal attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the
+       signal attenuation measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.9"
+   ::= { adsl2LineEntry 17 }
+
+adsl2LineStatusSnrMarginDs  OBJECT-TYPE
+   SYNTAX      Integer32 (-640..630 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Downstream SNR Margin is the maximum increase in dB of the
+       noise power received at the ATU-R, such that the BER
+       requirements are met for all downstream bearer channels.  It
+       ranges from -640 to 630 units of 0.1 dB (physical values are
+       -64 to 63 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the
+       SNR Margin is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the
+       SNR Margin measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.10"
+   ::= { adsl2LineEntry 18 }
+
+adsl2LineStatusSnrMarginUs  OBJECT-TYPE
+   SYNTAX      Integer32 (-640..630 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Upstream SNR Margin is the maximum increase in dB of the noise
+       power received at the ATU-C, such that the BER requirements
+       are met for all downstream bearer channels.  It ranges from
+       -640 to 630 units of 0.1 dB (physical values are -64 to
+       63 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the
+       SNR Margin is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the
+       SNR Margin measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.11"
+   ::= { adsl2LineEntry 19 }
+
+adsl2LineStatusAttainableRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Maximum Attainable Data Rate Downstream.
+       The maximum downstream net data rate currently attainable by
+       the ATU-C transmitter and the ATU-R receiver, coded in
+       bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.12"
+   ::= { adsl2LineEntry 20 }
+
+adsl2LineStatusAttainableRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Maximum Attainable Data Rate Upstream.
+       The maximum upstream net data rate currently attainable by the
+       ATU-R transmitter and the ATU-C receiver, coded in
+       bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.13"
+   ::= { adsl2LineEntry 21 }
+
+adsl2LineStatusActPsdDs OBJECT-TYPE
+   SYNTAX      Integer32 (-900..0 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Power Spectrum Density (PSD) Downstream.  The average
+       downstream transmit PSD over the sub-carriers used for
+       downstream.  It ranges from -900 to 0 units of 0.1 dB
+       (physical values are -90 to 0 dBm/Hz).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement
+       is out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.14"
+   ::= { adsl2LineEntry 22 }
+
+adsl2LineStatusActPsdUs OBJECT-TYPE
+   SYNTAX      Integer32 (-900..0 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Power Spectrum Density (PSD) Upstream.  The average
+       upstream transmit PSD over the sub-carriers used for upstream.
+       It ranges from -900 to 0 units of 0.1 dB (physical values
+       are -90 to 0 dBm/Hz).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement
+       is out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.15"
+   ::= { adsl2LineEntry 23 }
+
+adsl2LineStatusActAtpDs  OBJECT-TYPE
+   SYNTAX      Integer32 (-310..310 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Aggregate Transmit Power Downstream.  The total amount
+       of transmit power delivered by the ATU-C at the U-C reference
+       point, at the instant of measurement.  It ranges from -310 to
+       310 units of 0.1 dB (physical values are -31 to 31 dBm).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement
+       is out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.16"
+   ::= { adsl2LineEntry 24 }
+
+adsl2LineStatusActAtpUs  OBJECT-TYPE
+   SYNTAX      Integer32 (-310..310 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Aggregate Transmit Power Upstream.  The total amount of
+       transmit power delivered by the ATU-R at the U-R
+       reference point, at the instant of measurement.  It ranges
+
+       from -310 to 310 units of 0.1 dB (physical values are -31
+       to 31 dBm).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement
+       is out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.17"
+   ::= { adsl2LineEntry 25 }
+
+------------------------------------------------
+--        adsl2ChannelStatusTable             --
+------------------------------------------------
+adsl2ChannelStatusTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2ChannelStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2ChannelStatusTable contains status
+       parameters of the ADSL2 channel.  This table contains live
+       data from equipment."
+   ::= { adsl2Status 1 }
+
+adsl2ChannelStatusEntry  OBJECT-TYPE
+   SYNTAX      Adsl2ChannelStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2ChannelStatusTable contains status
+       parameters of the ADSL2 channel.
+       The index of this table consists of an interface index, where
+       the interface has an ifType value that is applicable
+       for a DSL channel, along with a termination unit."
+   INDEX  { ifIndex, adsl2ChStatusUnit }
+   ::= { adsl2ChannelStatusTable 1 }
+
+Adsl2ChannelStatusEntry  ::=
+   SEQUENCE {
+      adsl2ChStatusUnit                Adsl2Unit,
+      adsl2ChStatusChannelNum          Unsigned32,
+      adsl2ChStatusActDataRate         Unsigned32,
+      adsl2ChStatusPrevDataRate        Unsigned32,
+      adsl2ChStatusActDelay            Unsigned32,
+      adsl2ChStatusAtmStatus           Adsl2ChAtmStatus,
+      adsl2ChStatusPtmStatus           Adsl2ChPtmStatus
+   }
+
+adsl2ChStatusUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit atuc(1) or atur(2)."
+   ::= { adsl2ChannelStatusEntry 1 }
+
+adsl2ChStatusChannelNum  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Provides the bearer channel number associated with this
+       row (i.e., the channel ifIndex).
+       This enables determining the channel configuration profile
+       and the channel thresholds profile applicable for this
+       bearer channel."
+   ::= { adsl2ChannelStatusEntry 2 }
+
+adsl2ChStatusActDataRate  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The actual net data rate that the bearer channel is operating
+       at, if in L0 power management state.  In L1 or L2 states, it
+       relates to the previous L0 state.  The data rate is coded in
+       bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.2.1"
+   ::= { adsl2ChannelStatusEntry 3 }
+
+adsl2ChStatusPrevDataRate  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The previous net data rate that the bearer channel was
+       operating at just before the latest rate change event.  This
+       could be a full or short initialization, fast retrain, DRA or
+       power management transitions, excluding transitions between L0
+       state and L1 or L2 states.  The data rate is coded in
+       bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.2.2"
+   ::= { adsl2ChannelStatusEntry 4 }
+
+adsl2ChStatusActDelay  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..8176)
+   UNITS       "milliseconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The actual one-way interleaving delay introduced by the
+       PMS-TC in the direction of the bearer channel, if in L0
+       power management state.  In L1 or L2 states, it relates to
+       the previous L0 state.  It is coded in ms (rounded to the
+       nearest ms)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.2.3"
+   ::= { adsl2ChannelStatusEntry 5 }
+
+adsl2ChStatusAtmStatus  OBJECT-TYPE
+   SYNTAX      Adsl2ChAtmStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates the current state (existing failures) of the ADSL
+       channel in case its Data Path is ATM.  This is a bit-map of
+       possible conditions.  The various bit positions are:
+          noDefect(0),
+          noCellDelineation(1), or
+          lossOfCellDelineation(2).
+      In the case where the channel is not an ATM Data Path, the
+      object is set to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.1.4"
+   ::= { adsl2ChannelStatusEntry 6 }
+
+adsl2ChStatusPtmStatus  OBJECT-TYPE
+   SYNTAX      Adsl2ChPtmStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates the current state (existing failures) of the ADSL
+       channel in case its Data Path is PTM.  This is a bit-map of
+       possible conditions.  The various bit positions are:
+          noDefect(0), or
+          outOfSync(1).
+      In the case where the channel is not a PTM Data Path, the
+      object is set to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.1.5"
+   ::= { adsl2ChannelStatusEntry 7 }
+
+------------------------------------------------
+--        Scalars that relate to the adsl2SCStatusTable.
+------------------------------------------------
+
+adsl2ScalarSCMaxInterfaces  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This value determines the upper size of adsl2SCStatusTable.
+       The maximum number of entries in adsl2SCStatusTable is equal
+       to two times the value of this attribute."
+   ::= { adsl2ScalarSC 1 }
+
+adsl2ScalarSCAvailInterfaces  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This value determines the amount of space that is
+       currently available in adsl2SCStatusTable.
+       The number of entries available in adsl2SCStatusTable is equal
+       to two times the value of this attribute."
+   ::= { adsl2ScalarSC 2 }
+
+------------------------------------------------
+--        adsl2SCStatusTable                --
+------------------------------------------------
+
+adsl2SCStatusTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2SCStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2SCStatusTable contains status parameters
+       of the ADSL2 sub-carriers.  The following points apply to this
+       table:
+       1.  The main purpose of this table is to hold the results
+           of a DELT.
+       2.  This table also holds parameters obtained at line
+           initialization time.
+       3.  The rows in this table are volatile; that is, they are
+           lost if the SNMP agent is rebooted.
+       4.  Due to the large OCTET STRING attributes in this table,
+           the worst case memory requirements for this table are
+           very high.  The manager may use the row status attribute
+           of this table to delete rows in order to reclaim memory.
+       5.  The manager may create rows in this table.  The SNMP
+           agent may create rows in this table.  Only the manager
+           may delete rows in this table.
+       6.  The maximum number of rows allowable in this table is
+           indicated by the scalar attribute
+           adsl2ScalarSCMaxInterfaces.
+
+           The number of rows available in this table is indicated
+           by the scalar attribute adsl2ScalarSCAvailInterfaces.
+       7.  The SNMP agent is permitted to create rows in this table
+           when a DELT completes successfully or when line
+           initialization occurs.  It is not mandatory for the SNMP
+           agent to create rows in this table; hence, it may be
+           necessary for the manager to create rows in this table
+           before any results can be stored.
+       8.  If the manager attempts to create a row in this table
+           and there are no more rows available, the creation
+           attempt will fail, and the response to the SNMP SET PDU
+           will contain the error noCreation(11).
+       9.  If the SNMP agent attempts to create a row in this table
+           and there are no more rows available, the creation
+           attempt will fail, and the attribute
+           adsl2LineCmndConfLdsfFailReason will indicate the
+           reason for the failure.  The failure reason will be either
+           tableFull(10) or noResources(11).
+       10. An example of use of this table is as follows:
+           Step 1. : The DELT is started by setting the
+                   : adsl2LineCmndConfLdsf from inhibit to force.
+           Step 2. : The DELT completes, and valid data is
+                   : available.
+           Step 3. : The row in the adsl2SCStatusTable where the
+                   : results will be stored does not yet exist so
+                   : the SNMP agent attempts to create the row.
+           Step 4. : Due to a low memory condition, a row in the
+                   : adsl2SCStatusTable table cannot be created at
+                   : this time.
+           Step 5. : The reason for the failure, tableFull(10), is
+                   : indicated in the adsl2LineCmndConfLdsfFailReason
+                   : attribute.
+       11. Another example of use of this table is as follows :
+           Step 1. : The DELT is started by setting the
+                   : adsl2LineCmndConfLdsf from inhibit to force.
+           Step 2. : The DELT completes and valid data is
+                   : available.
+           Step 3. : The row in the adsl2SCStatusTable where the
+                   : results will be stored does not yet exist so
+                   : the SNMP agent attempts to create the row.
+           Step 4. : The row creation is successful.
+           Step 5. : The value of the attribute
+                   : adsl2LineCmndConfLdsfFailReasonreason is set
+                   : to success(2).
+       12. Another example of use of this table is as follows:
+           Step 1. : The manager creates a row in adsl2SCStatusTable
+                   : for a particular ADSL2 line.
+           Step 2. : The DELT is started on the above-mentioned
+
+                   : line by setting the adsl2LineCmndConfLdsf from
+                   : inhibit to force.
+           Step 3. : The DELT completes, and valid data is
+                   : available.
+           Step 4. : The value of the attribute
+                   : adsl2LineCmndConfLdsfFailReasonreason is set
+                   : to success(2)."
+   ::= { adsl2Status 2 }
+
+adsl2SCStatusEntry  OBJECT-TYPE
+   SYNTAX      Adsl2SCStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table Adsl2SCStatusEntry contains status parameters
+       of the ADSL2 sub-carriers.
+       The index of this table is an interface index where the
+       interface has an ifType of adsl2plus(238)."
+   INDEX  { ifIndex, adsl2SCStatusDirection }
+   ::= { adsl2SCStatusTable 1 }
+
+Adsl2SCStatusEntry  ::=
+   SEQUENCE {
+      adsl2SCStatusDirection         Adsl2Direction,
+      adsl2SCStatusMtime             Unsigned32,
+      adsl2SCStatusSnr               OCTET STRING,
+      adsl2SCStatusBitsAlloc         OCTET STRING,
+      adsl2SCStatusGainAlloc         OCTET STRING,
+      adsl2SCStatusTssi              Adsl2Tssi,
+      adsl2SCStatusLinScale          Unsigned32,
+      adsl2SCStatusLinReal           OCTET STRING,
+      adsl2SCStatusLinImg            OCTET STRING,
+      adsl2SCStatusLogMt             Unsigned32,
+      adsl2SCStatusLog               OCTET STRING,
+      adsl2SCStatusQlnMt             Unsigned32,
+      adsl2SCStatusQln               OCTET STRING,
+      adsl2SCStatusLnAtten           Unsigned32,
+      adsl2SCStatusSigAtten          Unsigned32,
+      adsl2SCStatusSnrMargin         Integer32,
+      adsl2SCStatusAttainableRate    Unsigned32,
+      adsl2SCStatusActAtp            Integer32,
+      adsl2SCStatusRowStatus         RowStatus
+   }
+
+adsl2SCStatusDirection  OBJECT-TYPE
+   SYNTAX      Adsl2Direction
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "The direction of the sub-carrier is either
+     upstream or downstream."
+     ::= { adsl2SCStatusEntry 1 }
+
+adsl2SCStatusMtime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "symbols"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "SNR Measurement Time.  The number of symbols used to
+      measure the SNR values on the respective transmission
+      direction.  It should correspond to the value specified in the
+      recommendation (e.g., the number of symbols in 1 second
+      time interval for G.992.3).  This parameter corresponds to
+      1 second in loop diagnostic procedure and should be updated
+      otherwise."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds)
+                 and paragraph 7.5.1.20.3 (SNRMTus)"
+     ::= { adsl2SCStatusEntry 2 }
+
+adsl2SCStatusSnr  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..512))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The SNR Margin per sub-carrier, expressing the ratio between
+      the received signal power and received noise power per
+      subscriber.  It is an array of 512 octets, designed for
+      supporting up to 512 (downstream) sub-carriers.
+      The number of utilized octets on downstream direction depends
+      on NSCds, and on upstream direction it depends on NSCus.  This
+      value is referred to here as NSC.
+      Octet i (0 <= i < NSC) is set to a value in the range 0 to
+      254 to indicate that the respective downstream or upstream sub-
+      carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB
+      (i.e., -32 to 95dB).
+      The special value 255 means that no measurement could be done
+      for the subcarrier because it is out of the PSD mask passband
+      or that the noise PSD is out of range to be represented.
+      Each value in this array is 8 bits wide."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.20.2 (SNRpsds)
+                 and paragraph 7.5.1.20.4 (SNRpsus)"
+     ::= { adsl2SCStatusEntry 3 }
+
+adsl2SCStatusBitsAlloc  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..256))
+   UNITS       "bits"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The bits allocation per sub-carrier.  An array of 256 octets
+      (512 nibbles), designed for supporting up to 512 (downstream)
+      sub-carriers.
+      The number of utilized nibbles on downstream direction depends
+      on NSCds, and on upstream direction it depends on NSCus.  This
+      value is referred to here as NSC.
+      Nibble i (0 <= i < NSC) is set to a value in the range 0
+      to 15 to indicate that the respective downstream or upstream
+      sub-carrier i has the same amount of bits allocation."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds)
+                 and paragraph 7.5.1.21.2 (BITSpsus)"
+     ::= { adsl2SCStatusEntry 4 }
+
+adsl2SCStatusGainAlloc  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..1024))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The gain allocation per sub-carrier.  An array of 512 16-bits
+     values, designed for supporting up to 512 (downstream) sub-
+     carriers.
+     The number of utilized octets on downstream direction depends
+     on NSCds, and on upstream direction it depends on NSCus.  This
+     value is referred to here as NSC.
+     Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate
+     that the respective downstream or upstream sub-carrier i has the
+     same amount of gain value.
+     The gain value is represented as a multiple of 1/512 on a
+     linear scale.  Each value in this array is 16 bits wide and is
+     stored in big endian format."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.21.3 (GAINSpsds)
+                 and paragraph 7.5.1.21.4 (GAINSpsus)"
+     ::= { adsl2SCStatusEntry 5 }
+
+adsl2SCStatusTssi  OBJECT-TYPE
+   SYNTAX      Adsl2Tssi
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The transmit spectrum shaping (TSSi) breakpoints expressed
+     as the set of breakpoints exchanged during G.994.1.
+     Each breakpoint is a pair of values occupying 3 octets with the
+     following structure:
+     First 2 octets - Index of the subcarrier used in the context of
+
+                      the breakpoint.
+     Third octet    - The shaping parameter at the breakpoint.
+     Subcarrier index is an unsigned number in the range 1 to either
+     NSCds (downstream direction) or NSCus (upstream direction).
+     The shaping parameter value is in the range 0 to 127 (units of
+     -0.5dB).  The special value 127 indicates that the subcarrier
+     is not transmitted."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.21.5 (TSSpsds)
+               and paragraph 7.5.1.21.6 (TSSpsus)"
+     ::= { adsl2SCStatusEntry 6 }
+
+adsl2SCStatusLinScale  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The scale factor to be applied to the H(f) linear
+     representation values for the respective transmission direction.
+     This parameter is only available after a loop diagnostic
+     procedure."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.18.1 (HLINSCds)
+               and paragraph 7.5.1.18.5 (HLINSCus)"
+     ::= { adsl2SCStatusEntry 7 }
+
+adsl2SCStatusLinReal  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..1024))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "An array of up to 512 complex H(f) linear representation
+     values in linear scale for the respective transmission
+     direction.  It is designed to support up to 512 (downstream)
+     sub-carriers.
+     The number of utilized values on downstream direction depends
+     on NSCds, and on upstream direction it depends on NSCus.  This
+     value is referred to here as NSC.
+     Each array entry represents the real component [referred to here
+     as a(i)] of Hlin(f = i*Df) value for a particular sub-carrier
+     index i (0 <= i < NSC).
+     Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
+     where scale is Adsl2SubcarrierLinScale and a(i) and b(i)
+     [provided by the Adsl2SubcarrierLinImg object] are in the range
+     (-2^15+1) to (+2^15-1).
+     A special value a(i)=b(i)= -2^15 indicates that no measurement
+     could be done for the subcarrier because it is out of the
+     passband or that the attenuation is out of range to be
+     represented.  This parameter is only available after a loop
+     diagnostic procedure.
+
+     Each value in this array is 16 bits wide and is stored in big
+     endian format."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.18.2 (HLINpsds)
+               and paragraph 7.5.1.18.6 (HLINpsds)"
+     ::= { adsl2SCStatusEntry 8 }
+
+adsl2SCStatusLinImg  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..1024))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "An array of up to 512 complex H(f) linear representation
+     values in linear scale for the respective transmission
+     direction.  It is designed to support up to 512 (downstream)
+     sub-carriers.
+     The number of utilized values on downstream direction depends
+     on NSCds, and on upstream direction it depends on NSCus.  This
+     value is referred to here as NSC.
+     Each array entry represents the imaginary component [referred
+     to here as b(i)] of Hlin(f = i*Df) value for a particular sub-
+     carrier index i (0 <= i < NSC).
+     Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
+     where scale is Adsl2SubcarrierLinScale and a(i) [provided by
+     the Adsl2SubcarrierLinReal object] and b(i) are in the range
+     (-2^15+1) to (+2^15-1).
+     A special value a(i)=b(i)= -2^15 indicates that no measurement
+     could be done for the subcarrier because it is out of the
+     passband or that the attenuation is out of range to be
+     represented.  This parameter is only available after a loop
+     diagnostic procedure.
+     Each value in this array is 16 bits wide and is stored in big
+     endian format."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.18.2 (HLINpsds)
+               and paragraph 7.5.1.18.6 (HLINpsds)"
+     ::= { adsl2SCStatusEntry 9 }
+
+adsl2SCStatusLogMt  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The number of symbols used to measure the H(f) logarithmic
+     measurement values for the respective transmission direction.
+     This parameter should correspond to the value specified in the
+     recommendation (e.g., the number of symbols in 1 second
+     time interval for G.992.3).  This parameter corresponds to 1
+     second in loop diagnostic procedure and should be updated in
+     initialization"
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.18.3 (HLOGMTds)
+               and paragraph 7.5.1.18.7 (HLOGMTus)"
+     ::= { adsl2SCStatusEntry 10 }
+
+adsl2SCStatusLog  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..1024))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "An array of up to 512 real H(f) logarithmic representation
+      values in dB for the respective transmission direction.  It is
+      designed to support up to 512 (downstream) sub-carriers.
+      The number of utilized values on downstream direction depends
+      on NSCds, and on upstream direction it depends on NSCus.  This
+      value is referred to here as NSC.
+      Each array entry represents the real Hlog(f = i*Df) value for a
+      particular sub-carrier index i, (0 <= i < NSC).
+      The real Hlog(f) value is represented as (6-m(i)/10), with m(i)
+      in the range 0 to 1022.  A special value m=1023 indicates that
+      no measurement could be done for the subcarrier because it is
+      out of the passband or that the attenuation is out of range to
+      be represented.  This parameter is applicable in loop
+      diagnostic procedure and initialization.
+      Each value in this array is 16 bits wide and is stored
+      in big endian format."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.18.4 (HLOGpsds)
+               and paragraph 7.5.1.18.8 (HLOGpsus)"
+     ::= { adsl2SCStatusEntry 11 }
+
+adsl2SCStatusQlnMt  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The number of symbols used to measure the Quiet Line Noise
+      values on the respective transmission direction.  This
+      parameter should correspond to the value specified in the
+      recommendation (e.g., the number of symbols in 1 second time
+      interval for G.992.3).  This parameter corresponds to 1 second
+      in loop diagnostic procedure and should be updated in
+      initialization "
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.19.1 (QLNMTds)
+               and paragraph 7.5.1.19.3 (QLNMTus)"
+     ::= { adsl2SCStatusEntry 12 }
+
+adsl2SCStatusQln  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..512))
+   UNITS       "dBm/Hz"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "An array of up to 512 real Quiet Line Noise values in dBm/Hz
+     for the respective transmission direction.  It is designed for
+     up to 512 (downstream) sub-carriers.
+     The number of utilized values on downstream direction depends
+     on NSCds, and on upstream direction it depends on NSCus.  This
+     value is referred to here as NSC.
+     Each array entry represents the QLN(f = i*Df) value for a
+     particular sub-carrier index i, (0 <= i < NSC).
+     The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the
+     range 0 to 254.  A special value n(i)=255 indicates that no
+     measurement could be done for the subcarrier because it is out
+     of the passband or that the noise PSD is out of range to be
+     represented.
+     This parameter is applicable in loop diagnostic procedure and
+     initialization.  Each value in this array is 8 bits wide."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.19.2 (QLNpsds)
+               and paragraph 7.5.1.19.4 (QLNpsus)"
+     ::= { adsl2SCStatusEntry 13 }
+
+adsl2SCStatusLnAtten  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "When referring to the downstream direction, it is the measured
+       difference in the total power transmitted by the ATU-C and the
+       total power received by the ATU-R over all sub-carriers during
+       diagnostics mode.
+       When referring to the upstream direction, it is the measured
+       difference in the total power transmitted by the ATU-R and the
+       total power received by the ATU-C over all sub-carriers during
+       diagnostics mode.
+       It ranges from 0 to 1270 units of 0.1 dB (physical values are
+       0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is unavailable.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once
+       the DELT process is over, the parameter no longer changes
+       until the row is deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.6 (LATNds)
+               and paragraph 7.5.1.7 (LATNus)"
+   ::= { adsl2SCStatusEntry 14 }
+
+adsl2SCStatusSigAtten  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "When referring to the downstream direction, it is the measured
+       difference in the total power transmitted by the
+       ATU-C and the total power received by the ATU-R over all sub-
+       carriers during Showtime after the diagnostics mode.
+       When referring to the upstream direction, it is the measured
+       difference in the total power transmitted by the
+       ATU-R and the total power received by the ATU-C over all sub-
+       carriers during Showtime after the diagnostics mode.
+       It ranges from 0 to 1270 units of 0.1 dB (physical values
+       are 0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the
+       signal attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the
+       signal attenuation measurement is unavailable.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once
+       the DELT process is over, the parameter no longer changes
+       until the row is deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.8 (SATNds)
+               and paragraph 7.5.1.9 (SATNus)"
+   ::= { adsl2SCStatusEntry 15 }
+
+adsl2SCStatusSnrMargin  OBJECT-TYPE
+   SYNTAX      Integer32 (-640..630 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "SNR Margin is the maximum increase in dB of the noise power
+       received at the ATU (ATU-R on downstream direction and ATU-C
+       on upstream direction), such that the BER requirements are met
+       for all bearer channels received at the ATU.  It ranges from
+       -640 to 630 units of 0.1 dB (physical values are -64 to
+       63 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the
+       SNR Margin is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the
+       SNR Margin measurement is currently unavailable.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once
+
+       the DELT process is over, the parameter no longer changes
+       until the row is deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.10 (SNRMds)
+               and paragraph 7.5.1.11 (SNRMus)"
+   ::= { adsl2SCStatusEntry 16 }
+
+adsl2SCStatusAttainableRate  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Maximum Attainable Data Rate.  The maximum net data rate
+       currently attainable by the ATU-C transmitter and ATU-R
+       receiver (when referring to downstream direction) or by the
+       ATU-R transmitter and ATU-C receiver (when referring to
+       upstream direction).  Value is coded in bits/second.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once
+       the DELT process is over, the parameter no longer changes
+       until the row is deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.12 (ATTNDRds)
+               and paragraph 7.5.1.13 (ATTNDRus)"
+   ::= { adsl2SCStatusEntry 17 }
+
+adsl2SCStatusActAtp  OBJECT-TYPE
+   SYNTAX      Integer32
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Aggregate Transmit Power from the ATU (ATU-R on
+       downstream direction and ATU-C on upstream direction), at the
+       instant of measurement.  It ranges from -310 to 310 units of
+       0.1 dB (physical values are -31 to 31 dBm).  A value of all
+       1's indicates the measurement is out of range to be
+       represented.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once
+       the DELT process is over, the parameter no longer changes
+       until the row is deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph 7.5.1.16 (ACTATPds)
+               and paragraph 7.5.1.17 (ACTATPus)"
+   ::= { adsl2SCStatusEntry 18 }
+
+adsl2SCStatusRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Row Status.  The manager may create and delete rows
+       of this table.  Please see the description of
+       adsl2SCStatusTable above for more details."
+   ::= { adsl2SCStatusEntry 19 }
+
+------------------------------------------------
+--        adsl2LineInventoryTable             --
+------------------------------------------------
+adsl2LineInventoryTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2LineInventoryEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineInventoryTable contains inventory of the
+       ADSL2 units."
+   ::= { adsl2Inventory 1 }
+
+adsl2LineInventoryEntry  OBJECT-TYPE
+   SYNTAX      Adsl2LineInventoryEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineInventoryTable contains inventory of the
+       ADSL2 units.
+       The index of this table is an interface index where the
+       interface has an ifType of adsl2plus(238)."
+   INDEX  { ifIndex, adsl2LInvUnit }
+   ::= { adsl2LineInventoryTable 1 }
+
+Adsl2LineInventoryEntry  ::=
+   SEQUENCE {
+      adsl2LInvUnit                      Adsl2Unit,
+      adsl2LInvG994VendorId              OCTET STRING,
+      adsl2LInvSystemVendorId            OCTET STRING,
+      adsl2LInvVersionNumber             OCTET STRING,
+      adsl2LInvSerialNumber              OCTET STRING,
+      adsl2LInvSelfTestResult            Unsigned32,
+      adsl2LInvTransmissionCapabilities  Adsl2TransmissionModeType
+   }
+
+adsl2LInvUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit atuc(1) or atur(2)."
+   ::= { adsl2LineInventoryEntry 1 }
+
+adsl2LInvG994VendorId  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(8))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
+       message.  It consists of 8 binary octets, including a country
+       code followed by a (regionally allocated) provider code, as
+       defined in Recommendation T.35."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.4"
+   ::= { adsl2LineInventoryEntry 2 }
+
+adsl2LInvSystemVendorId  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(8))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU System Vendor ID (identifies the ATU system
+       integrator) as inserted in the Overhead Messages (both ATUs
+       for G.992.3 and G.992.4) or in the Embedded Operations
+       Channel (only ATU-R in G.992.1 and G.992.2).  It consists of
+       8 binary octets, with the same format as used for
+       Adsl2InvG994VendorId."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.4"
+   ::= { adsl2LineInventoryEntry 3 }
+
+adsl2LInvVersionNumber  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..16))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU version number (vendor-specific information) as
+       inserted in the Overhead Messages (both ATUs for G.992.3 and
+       G.992.4) or in the Embedded Operations Channel (only ATU-R in
+       G.992.1 and G.992.2).  It consists of up to 16 binary octets."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.4"
+   ::= { adsl2LineInventoryEntry 4 }
+
+adsl2LInvSerialNumber  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..32))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU serial number (vendor-specific information) as
+       inserted in the Overhead Messages (both ATUs for G.992.3 and
+       G.992.4) or in the Embedded Operations Channel (only ATU-R in
+
+       G.992.1 and G.992.2).  It is vendor-specific information.  It
+       consists of up to 32 ASCII characters."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.4"
+   ::= { adsl2LineInventoryEntry 5 }
+
+adsl2LInvSelfTestResult  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU self-test result, coded as a 32-bit value.  The
+       most significant octet of the result is '0' if the self-test
+       passed, and '1' if the self-test failed.  The interpretation
+       of the other octets is vendor discretionary."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.4"
+   ::= { adsl2LineInventoryEntry 6 }
+
+adsl2LInvTransmissionCapabilities  OBJECT-TYPE
+   SYNTAX      Adsl2TransmissionModeType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU transmission system capability list of the different
+       coding types.  It is coded in a bit-map representation with 1
+       or more bits set.  A bit set to '1' means that the ATU
+       supports the respective coding.  The value may be derived
+       from the handshaking procedures defined in G.994.1.  A set
+       of ADSL2 line transmission modes, with one bit per mode."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.4"
+   ::= { adsl2LineInventoryEntry 7 }
+
+------------------------------------------------
+--        adsl2LineConfTemplateTable          --
+------------------------------------------------
+adsl2LineConfTemplateTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2LineConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineConfTemplateTable contains ADSL2 line
+       configuration templates.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+   ::= { adsl2ProfileLine 1 }
+
+adsl2LineConfTemplateEntry  OBJECT-TYPE
+   SYNTAX      Adsl2LineConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineConfTemplateTable contains the ADSL2 line
+       configuration template.
+       A default template with an index of 'DEFVAL' will
+       always exist, and its parameters will be set to vendor-
+       specific values, unless otherwise specified in this document."
+   INDEX  { adsl2LConfTempTemplateName }
+   ::= { adsl2LineConfTemplateTable 1 }
+
+Adsl2LineConfTemplateEntry  ::=
+   SEQUENCE {
+      adsl2LConfTempTemplateName      SnmpAdminString,
+      adsl2LConfTempLineProfile       SnmpAdminString,
+      adsl2LConfTempChan1ConfProfile  SnmpAdminString,
+      adsl2LConfTempChan1RaRatioDs    Unsigned32,
+      adsl2LConfTempChan1RaRatioUs    Unsigned32,
+      adsl2LConfTempChan2ConfProfile  SnmpAdminString,
+      adsl2LConfTempChan2RaRatioDs    Unsigned32,
+      adsl2LConfTempChan2RaRatioUs    Unsigned32,
+      adsl2LConfTempChan3ConfProfile  SnmpAdminString,
+      adsl2LConfTempChan3RaRatioDs    Unsigned32,
+      adsl2LConfTempChan3RaRatioUs    Unsigned32,
+      adsl2LConfTempChan4ConfProfile  SnmpAdminString,
+      adsl2LConfTempChan4RaRatioDs    Unsigned32,
+      adsl2LConfTempChan4RaRatioUs    Unsigned32,
+      adsl2LConfTempRowStatus         RowStatus
+   }
+
+adsl2LConfTempTemplateName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.1.4"
+   ::= { adsl2LineConfTemplateEntry 1 }
+
+adsl2LConfTempLineProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2 Line
+       Configuration Profile Table, (adsl2LineConfProfTable),
+       which applies for this ADSL2 line."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.1.4"
+   DEFVAL       { "DEFVAL" }
+   ::= { adsl2LineConfTemplateEntry 2 }
+
+adsl2LConfTempChan1ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Configuration Profile Table,
+       (adsl2ChConfProfileTable) that applies to ADSL2 bearer
+       channel #1.  The channel profile name specified here must
+       match the name of an existing row in the
+       adsl2ChConfProfileTable table."
+   DEFVAL       { "DEFVAL" }
+   ::= { adsl2LineConfTemplateEntry 3 }
+
+adsl2LConfTempChan1RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #1 when performing rate
+       adaptation on Downstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the 100 -
+       adsl2LConfTempChan1RaRatioDs is the ratio of excess data
+       rate to be assigned to all other bearer channels on Downstream
+       direction.  The sum of rate adaptation ratios over all bearers
+       on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 100 }
+   ::= { adsl2LineConfTemplateEntry 4 }
+
+adsl2LConfTempChan1RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #1 when performing rate
+       adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the
+
+       100 - adsl2LConfTempChan1RaRatioUs is the ratio of excess
+       data rate to be assigned to all other bearer channels on
+       Upstream direction.  The sum of rate adaptation ratios over
+       all bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 100 }
+   ::= { adsl2LineConfTemplateEntry 5 }
+
+adsl2LConfTempChan2ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Configuration Profile Table
+       (adsl2ChConfProfileTable) that applies to ADSL2 bearer
+       channel #2.  If the channel is unused, then the object is set
+       to a zero-length string.
+       This object may be set to a zero-length string only if
+       adsl2LConfTempChan3ConfProfile contains a zero-length
+       string."
+   DEFVAL       { "" }
+   ::= { adsl2LineConfTemplateEntry 6 }
+
+adsl2LConfTempChan2RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #2 when performing rate
+       adaptation on Downstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the
+       100 - adsl2LConfTempChan2RaRatioDs is the ratio of excess
+       data rate to be assigned to all other bearer channels on
+       Downstream direction.  The sum of rate adaptation ratios
+       over all bearers on the same direction shall be equal to
+       100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 0 }
+   ::= { adsl2LineConfTemplateEntry 7 }
+
+adsl2LConfTempChan2RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #2 when performing rate
+       adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the
+       100 - adsl2LConfTempChan2RaRatioUs is the ratio of excess
+       data rate to be assigned to all other bearer channels on
+       Upstream direction.  The sum of rate adaptation ratios over
+       all bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 0 }
+   ::= { adsl2LineConfTemplateEntry 8 }
+
+adsl2LConfTempChan3ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Configuration Profile Table
+       (adsl2ChConfProfileTable) that applies to ADSL2 bearer
+       channel #3.  If the channel is unused, then the object is set
+       to a zero-length string.
+       This object may be set to a zero-length string only if
+       adsl2LConfTempChan4ConfProfile contains a zero-length
+       string.
+       This object may be set to a non-zero-length string only if
+       adsl2LConfTempChan2ConfProfile contains a non-zero-length
+       string."
+   DEFVAL       { "" }
+   ::= { adsl2LineConfTemplateEntry 9 }
+
+adsl2LConfTempChan3RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #3 when performing rate
+       adaptation on Downstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the 100 -
+       adsl2LConfTempChan3RaRatioDs is the ratio of excess data
+       rate to be assigned to all other bearer channels on Downstream
+
+       direction.  The sum of rate adaptation ratios over all bearers
+       on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 0 }
+   ::= { adsl2LineConfTemplateEntry 10 }
+
+adsl2LConfTempChan3RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #3 when performing rate
+       adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the
+       100 - adsl2LConfTempChan3RaRatioUs is the ratio of excess
+       data rate to be assigned to all other bearer channels on
+       Upstream direction.  The sum of rate adaptation ratios over
+       all bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 0 }
+   ::= { adsl2LineConfTemplateEntry 11 }
+
+adsl2LConfTempChan4ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Configuration Profile Table
+       (adsl2ChConfProfileTable) that applies to ADSL2 bearer
+       channel #4.  If the channel is unused, then the object is set
+       to a zero-length string.
+       This object may be set to a non-zero-length string only if
+       adsl2LConfTempChan3ConfProfile contains a non-zero-length
+       string."
+   DEFVAL       { "" }
+   ::= { adsl2LineConfTemplateEntry 12 }
+
+adsl2LConfTempChan4RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+
+       into account for the bearer channel #4 when performing rate
+       adaptation on Downstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.  Also, the 100 -
+       adsl2LConfTempChan4RaRatioDs is the ratio of
+       excess data rate to be assigned to all other bearer channels.
+       The sum of rate adaptation ratios over all bearers on the same
+       direction shall sum to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 0 }
+   ::= { adsl2LineConfTemplateEntry 13 }
+
+adsl2LConfTempChan4RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in %) that should be taken
+       into account for the bearer channel #4 when performing rate
+       adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over
+       all bearer channels.  Also, the 100 -
+       adsl2LConfTempChan4RaRatioUs is the
+       ratio of excess data rate to be assigned to all other bearer
+       channels.  The sum of rate adaptation ratios over all bearers
+       on the same direction shall sum to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   DEFVAL       { 0 }
+   ::= { adsl2LineConfTemplateEntry 14 }
+
+adsl2LConfTempRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A template is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the template.
+
+      Before a template can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      lines."
+   ::= { adsl2LineConfTemplateEntry 15 }
+
+------------------------------------------
+--        adsl2LineConfProfTable        --
+------------------------------------------
+adsl2LineConfProfTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2LineConfProfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineConfProfTable contains ADSL2 line profile
+       configuration.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+   ::= { adsl2ProfileLine 2 }
+
+adsl2LineConfProfEntry  OBJECT-TYPE
+   SYNTAX      Adsl2LineConfProfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineConfProfTable contains ADSL2 line profile
+       configuration.
+
+       A default profile with an index of 'DEFVAL' will
+       always exist, and its parameters will be set to vendor-
+       specific values, unless otherwise specified in this document."
+   INDEX  { adsl2LConfProfProfileName }
+   ::= { adsl2LineConfProfTable 1 }
+
+Adsl2LineConfProfEntry  ::=
+   SEQUENCE {
+      adsl2LConfProfProfileName          SnmpAdminString,
+      adsl2LConfProfScMaskDs             Adsl2ScMaskDs,
+      adsl2LConfProfScMaskUs             Adsl2ScMaskUs,
+      adsl2LConfProfRfiBandsDs           Adsl2RfiDs,
+      adsl2LConfProfRaModeDs             Adsl2RaMode,
+      adsl2LConfProfRaModeUs             Adsl2RaMode,
+      adsl2LConfProfRaUsNrmDs            Unsigned32,
+      adsl2LConfProfRaUsNrmUs            Unsigned32,
+      adsl2LConfProfRaUsTimeDs           Unsigned32,
+      adsl2LConfProfRaUsTimeUs           Unsigned32,
+      adsl2LConfProfRaDsNrmsDs           Unsigned32,
+      adsl2LConfProfRaDsNrmsUs           Unsigned32,
+      adsl2LConfProfRaDsTimeDs           Unsigned32,
+      adsl2LConfProfRaDsTimeUs           Unsigned32,
+      adsl2LConfProfTargetSnrmDs         Unsigned32,
+      adsl2LConfProfTargetSnrmUs         Unsigned32,
+      adsl2LConfProfMaxSnrmDs            Unsigned32,
+      adsl2LConfProfMaxSnrmUs            Unsigned32,
+      adsl2LConfProfMinSnrmDs            Unsigned32,
+      adsl2LConfProfMinSnrmUs            Unsigned32,
+      adsl2LConfProfMsgMinUs             Unsigned32,
+      adsl2LConfProfMsgMinDs             Unsigned32,
+      adsl2LConfProfAtuTransSysEna       Adsl2TransmissionModeType,
+      adsl2LConfProfPmMode               Adsl2LConfProfPmMode,
+      adsl2LConfProfL0Time               Unsigned32,
+      adsl2LConfProfL2Time               Unsigned32,
+      adsl2LConfProfL2Atpr               Unsigned32,
+      adsl2LConfProfL2Atprt              Unsigned32,
+      adsl2LConfProfRowStatus            RowStatus
+   }
+
+adsl2LConfProfProfileName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+     ::= { adsl2LineConfProfEntry 1 }
+
+adsl2LConfProfScMaskDs  OBJECT-TYPE
+   SYNTAX      Adsl2ScMaskDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Sub-carriers mask.  A bitmap of 512 bits that allows masking
+       up to 512 downstream sub-carriers, depending on NSCds.  If bit
+       i (0 <= i < NSCds) is set to '1', the respective
+       downstream sub-carrier i is masked, and if set to '0', the
+       respective sub-carrier is unmasked.  Note that there should
+       always be unmasked sub-carriers (i.e., the object cannot be
+       all 1's).  Also note that if NSCds < 512, all bits
+       i (NSCds < i <= 512) should be set to '1'."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2.6"
+   ::= { adsl2LineConfProfEntry 2 }
+
+adsl2LConfProfScMaskUs  OBJECT-TYPE
+   SYNTAX      Adsl2ScMaskUs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Sub-carriers mask.  A bitmap of 64 bits that allows masking
+       up to 64 downstream sub-carriers, depending on NSCds.  If
+       bit i (0 <= i < NSCus) is set to '1', the respective
+       upstream sub-carrier i is masked, and if set to '0', the
+       respective sub-carrier is unmasked.  Note that there
+
+       should always be unmasked sub-carriers (i.e., the object
+       cannot be all 1's).  Also note that if NSCus <
+       64, all bits i (NSCus < i <= 64) should be set to '1'."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2.7"
+   ::= { adsl2LineConfProfEntry 3 }
+
+adsl2LConfProfRfiBandsDs  OBJECT-TYPE
+   SYNTAX      Adsl2RfiDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "The subset of downstream PSD mask breakpoints that shall be
+       used to notch an RFI band.
+       The specific interpolation around these points is defined in
+       G.992.5.  It is a bitmap of 512 bits that allows referring to
+       up to 512 downstream sub-carriers, depending on NSCds.  If bit
+       i (0 <= i < NSCds) is set to '1', the respective downstream
+       sub-carrier i is part of a notch filter, and if set to '0',
+       the respective sub-carrier is not part of a notch filter.
+       This information complements the specification provided by
+       adsl2LConfProfPsdMaskDs.
+       Note that if NSCds < 512, all bits i (NSCds<i<512)
+       should be set to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2.9"
+   ::= { adsl2LineConfProfEntry 4 }
+
+adsl2LConfProfRaModeDs  OBJECT-TYPE
+   SYNTAX      Adsl2RaMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The mode of operation of a rate-adaptive ATU-C in the transmit
+       direction.  The parameter can take three values:
+          manual(1),
+          raInit(2), or
+          dynamicRa(3)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.1"
+   DEFVAL       { manual }
+   ::= { adsl2LineConfProfEntry 5 }
+
+adsl2LConfProfRaModeUs  OBJECT-TYPE
+   SYNTAX      Adsl2RaMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The mode of operation of a rate-adaptive ATU-R in the transmit
+       direction.  The parameter can take three values:
+          manual(1),
+          raInit(2), or
+          dynamicRa(3)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.2"
+   DEFVAL       { manual }
+   ::= { adsl2LineConfProfEntry 6 }
+
+adsl2LConfProfRaUsNrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Up-Shift Noise Margin value, to be used when
+       adsl2LConfProfRaModeDs is set to dynamicRa.  If the downstream
+       noise margin is above this value and stays above it for
+       more than the time specified by the adsl2LConfProfRaUsTimeDs,
+       the ATU-R shall attempt to increase the downstream net data
+       rate.  The Downstream Up-Shift Noise Margin ranges from 0 to
+       310 units of 0.1 dB (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.3"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 7 }
+
+adsl2LConfProfRaUsNrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Up-Shift Noise Margin value, to be used when
+       adsl2LConfProfRaModeUs is set to dynamicRa.  If the upstream
+       noise margin is above this value and stays above it for more
+       than the time specified by the adsl2LConfProfRaUsTimeUs, the
+       ATU-C shall attempt to increase the upstream net data rate.
+       The Upstream Up-Shift Noise Margin ranges from 0 to 310 units
+       of 0.1 dB (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.4"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 8 }
+
+adsl2LConfProfRaUsTimeDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Up-Shift Time Interval, to be used when
+       adsl2LConfProfRaModeDs is set to dynamicRa.  The interval of
+
+       time that the downstream noise margin should stay above the
+       Downstream Up-Shift Noise Margin before the ATU-R shall
+       attempt to increase the downstream net data rate.  The time
+       interval ranges from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.5"
+   DEFVAL       { 3600 }
+   ::= { adsl2LineConfProfEntry 9 }
+
+adsl2LConfProfRaUsTimeUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Up-Shift Time Interval, to be used when
+       adsl2LConfProfRaModeUs is set to dynamicRa.  The interval of
+       time the upstream noise margin should stay above the
+       Upstream Up-Shift Noise Margin before the ATU-C shall
+       attempt to increase the upstream net data rate.  The time
+       interval ranges from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.6"
+   DEFVAL       { 3600 }
+   ::= { adsl2LineConfProfEntry 10 }
+
+adsl2LConfProfRaDsNrmsDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Down-Shift Noise Margin value, to be used when
+       adsl2LConfProfRaModeDs is set to dynamicRa.  If the downstream
+       noise margin is below this value and stays below that for more
+       than the time specified by the adsl2LConfProfRaDsTimeDs, the
+       ATU-R shall attempt to decrease the downstream net data rate.
+       The Downstream Down-Shift Noise Margin ranges from 0 to 310
+       units of 0.1 dB (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.7"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 11 }
+
+adsl2LConfProfRaDsNrmsUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Down-Shift Noise Margin value, to be used when
+
+       adsl2LConfProfRaModeUs is set to dynamicRa.  If the upstream
+       noise margin is below this value and stays below that for more
+       than the time specified by the adsl2LConfProfRaDsTimeUs, the
+       ATU-C shall attempt to decrease the upstream net data rate.
+       The Upstream Down-Shift Noise Margin ranges from 0 to 310
+       units of 0.1 dB (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.8"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 12 }
+
+adsl2LConfProfRaDsTimeDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Down-Shift Time Interval, to be used when
+       adsl2LConfProfRaModeDs is set to dynamicRa.  The interval of
+       time the downstream noise margin should stay below the
+       Downstream Down-Shift Noise Margin before the ATU-R shall
+       attempt to decrease the downstream net data rate.  The time
+       interval ranges from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.9"
+   DEFVAL       { 3600 }
+   ::= { adsl2LineConfProfEntry 13 }
+
+adsl2LConfProfRaDsTimeUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Down-Shift Time Interval, to be used when
+       adsl2LConfProfRaModeUs is set to dynamicRa.  The interval of
+       time the upstream noise margin should stay below the Upstream
+       Down-Shift Noise Margin before the ATU-C shall attempt to
+       decrease the upstream net data rate.  The time interval ranges
+       from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.4.10"
+   DEFVAL       { 3600 }
+   ::= { adsl2LineConfProfEntry 14 }
+
+adsl2LConfProfTargetSnrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the ATU-R receiver shall achieve,
+       relative to the BER requirement for each of the downstream
+       bearer channels, to successfully complete initialization.
+       The target noise margin ranges from 0 to 310 units of 0.1 dB
+       (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.3.1"
+   DEFVAL       { 60 }
+   ::= { adsl2LineConfProfEntry 15 }
+
+adsl2LConfProfTargetSnrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the ATU-C receiver shall achieve,
+       relative to the BER requirement for each of the upstream
+       bearer channels, to successfully complete initialization.
+       The target noise margin ranges from 0 to 310 units of 0.1 dB
+       (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.3.2"
+   DEFVAL       { 60 }
+   ::= { adsl2LineConfProfEntry 16 }
+
+adsl2LConfProfMaxSnrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..310 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum Noise Margin the ATU-R receiver shall try to
+       sustain.  If the Noise Margin is above this level, the ATU-R
+       shall request that the ATU-C reduce the ATU-C transmit power
+       to get a noise margin below this limit (if this functionality
+       is supported).  The maximum noise margin ranges from 0 to 310
+       units of 0.1 dB (physical values are 0 to 31 dB).  A value of
+       0x7FFFFFFF (2147483647) means that there is no maximum."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.3.3"
+   DEFVAL       { 310 }
+   ::= { adsl2LineConfProfEntry 17 }
+
+adsl2LConfProfMaxSnrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..310 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum Noise Margin the ATU-C receiver shall try to
+
+       sustain.  If the Noise Margin is above this level, the ATU-C
+       shall request that the ATU-R reduce the ATU-R transmit power
+       to get a noise margin below this limit (if this functionality
+       is supported).  The maximum noise margin ranges from 0 to 310
+       units of 0.1 dB (physical values are 0 to 31 dB).  A value of
+       0x7FFFFFFF (2147483647) means that there is no maximum."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.3.4"
+   DEFVAL       { 310 }
+   ::= { adsl2LineConfProfEntry 18 }
+
+adsl2LConfProfMinSnrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the ATU-R receiver shall tolerate.
+       If the noise margin falls below this level, the ATU-R shall
+       request that the ATU-C increase the ATU-C transmit power.
+       If an increase to ATU-C transmit power is not possible, a
+       loss-of-margin (LOM) defect occurs, the ATU-R shall fail and
+       attempt to reinitialize, and the NMS shall be notified.  The
+       minimum noise margin ranges from 0 to 310 units of
+       0.1 dB (physical values are 0 to 31 dB).  A value of 0 means
+       that there is no minimum."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.3.5"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 19 }
+
+adsl2LConfProfMinSnrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the ATU-C receiver shall tolerate.
+       If the noise margin falls below this level, the ATU-C shall
+       request that the ATU-R increase the ATU-R transmit power.
+       If an increase of ATU-R transmit power is not possible, a
+       loss-of-margin (LOM) defect occurs, the ATU-C shall fail and
+       attempt to reinitialize, and the NMS shall be notified.  The
+       minimum noise margin ranges from 0 to 310 units of
+       0.1 dB (physical values are 0 to 31 dB).  A value of 0 means
+       that there is no minimum."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.3.6"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 20 }
+
+adsl2LConfProfMsgMinUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(4000..63000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Overhead Rate Upstream.  Defines the minimum rate of
+       the message-based overhead that shall be maintained by the ATU
+       in upstream direction.  Expressed in bits per second and
+       ranges from 4000 to 63000 bps."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.5.1"
+   DEFVAL       { 4000 }
+  ::= { adsl2LineConfProfEntry 21 }
+
+adsl2LConfProfMsgMinDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(4000..63000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Overhead Rate Downstream.  Defines the minimum rate of
+       the message-based overhead that shall be maintained by the ATU
+       in downstream direction.  Expressed in bits per second and
+       ranges from 4000 to 63000 bps."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.5.2"
+   DEFVAL       { 4000 }
+   ::= { adsl2LineConfProfEntry 22 }
+
+adsl2LConfProfAtuTransSysEna  OBJECT-TYPE
+   SYNTAX      Adsl2TransmissionModeType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "ATU Transmission System Enabling (ATSE).  A list of the
+       different coding types enabled in this profile.  It is coded
+       in a bit-map representation with 1 or more bits set.  A bit
+       set to  '1' means that the ATUs may apply the respective
+       coding for the ADSL line.  A bit set to '0' means that
+       the ATUs cannot apply the respective coding for the ADSL
+       line.  All 'reserved' bits should be set to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.1"
+   ::= { adsl2LineConfProfEntry 23 }
+
+adsl2LConfProfPmMode  OBJECT-TYPE
+   SYNTAX      Adsl2LConfProfPmMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Power management state Enabling.  Defines the power states the
+       ATU-C or ATU-R may autonomously transition to on this line.
+       The various bit positions are: allowTransitionsToIdle(0) and
+       allowTransitionsToLowPower(1).  A bit with a '1' value means
+       that the ATU is allowed to transit into the respective state,
+       and a '0' value means that the ATU is not allowed
+       to transit into the respective state."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.4"
+   DEFVAL  { { allowTransitionsToIdle, allowTransitionsToLowPower } }
+   ::= { adsl2LineConfProfEntry 24 }
+
+adsl2LConfProfL0Time  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This minimum time (in seconds) between an Exit from the L2
+       state and the next Entry into the L2 state.  It ranges from 0
+       to 255 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.5"
+   DEFVAL       { 255 }
+   ::= { adsl2LineConfProfEntry 25 }
+
+adsl2LConfProfL2Time  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This minimum time (in seconds) between an Entry into the
+      L2 state and the first Power Trim in the L2 state and between
+      two consecutive Power Trims in the L2 State.
+      It ranges from 0 to 255 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.1.6"
+   DEFVAL       { 255 }
+   ::= { adsl2LineConfProfEntry 26 }
+
+adsl2LConfProfL2Atpr  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..31)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum aggregate transmit power reduction (in dB) that
+       can be performed at transition of L0 to L2 state or through a
+       single Power Trim in the L2 state.
+       It ranges from 0 dB to 31 dB."
+   REFERENCE    "ITU-T G.997.1 (amendment 1), 7.3.1.1.7"
+   DEFVAL       { 10 }
+   ::= { adsl2LineConfProfEntry 27 }
+
+adsl2LConfProfL2Atprt  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..31)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The total maximum aggregate transmit power reduction
+      (in dB) that can be performed in an L2 state.  This is the
+      sum of all reductions of L2 Request (i.e., at transition of
+      L0 to L2 state) and Power Trims."
+   REFERENCE    "ITU-T G.997.1 (amendment 1), 7.3.1.1.9"
+   DEFVAL       { 31 }
+   ::= { adsl2LineConfProfEntry 28 }
+
+adsl2LConfProfRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A profile is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the profile.
+
+      Before a profile can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      templates."
+   ::= { adsl2LineConfProfEntry 29 }
+
+------------------------------------------
+--    adsl2LineConfProfModeSpecTable    --
+------------------------------------------
+adsl2LineConfProfModeSpecTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2LineConfProfModeSpecEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineConfProfModeSpecTable extends the
+       ADSL2 line configuration profile by ADSL Mode Specific
+       parameters.
+       A row in this table that has an index of
+
+       adsl2LConfProfAdslMode == defMode(1) is called a
+       'mandatory' row.
+       A row in this table that has an index such that
+       adsl2LConfProfAdslMode is not equal to defMode(1)
+       is called an 'optional' row.
+       When a row in the adsl2LineConfProfTable table
+       (the parent row) is created, the SNMP agent will
+       automatically create a 'mandatory' row in this table.
+       When the parent row is deleted, the SNMP agent will
+       automatically delete all associated rows in this table.
+       Any attempt to delete the 'mandatory' row using the
+       adsl2LConfProfModeSpecRowStatus attribute will be
+       rejected by the SNMP agent.
+       The manager MAY create an 'optional' row in this table
+       using the adsl2LConfProfModeSpecRowStatus attribute if
+       the parent row exists.
+       The manager MAY delete an 'optional' row in this table
+       using the adsl2LConfProfModeSpecRowStatus attribute at
+       any time.
+       If the actual transmission mode of a DSL line does not
+       match one of the 'optional' rows in this table, then
+       the line will use the PSD configuration from the
+       'mandatory' row.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+   ::= { adsl2ProfileLine 3 }
+
+adsl2LineConfProfModeSpecEntry  OBJECT-TYPE
+   SYNTAX      Adsl2LineConfProfModeSpecEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineConfProfModeSpecTable extends the
+       ADSL2 line configuration profile by ADSL Mode Specific
+       parameters."
+   INDEX  { adsl2LConfProfProfileName, adsl2LConfProfAdslMode }
+   ::= { adsl2LineConfProfModeSpecTable 1 }
+
+Adsl2LineConfProfModeSpecEntry  ::=
+   SEQUENCE {
+      adsl2LConfProfAdslMode             Adsl2OperationModes,
+      adsl2LConfProfMaxNomPsdDs          Integer32,
+      adsl2LConfProfMaxNomPsdUs          Integer32,
+      adsl2LConfProfMaxNomAtpDs          Unsigned32,
+      adsl2LConfProfMaxNomAtpUs          Unsigned32,
+      adsl2LConfProfMaxAggRxPwrUs        Integer32,
+      adsl2LConfProfPsdMaskDs            Adsl2PsdMaskDs,
+      adsl2LConfProfPsdMaskUs            Adsl2PsdMaskUs,
+      adsl2LConfProfPsdMaskSelectUs      Unsigned32,
+      adsl2LConfProfModeSpecRowStatus    RowStatus
+   }
+
+adsl2LConfProfAdslMode    OBJECT-TYPE
+   SYNTAX      Adsl2OperationModes
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The ADSL Mode is a way of categorizing the various ADSL
+       transmission modes into groups; each group (ADSL Mode) shares
+       the same PSD configuration.
+       There should be multiple entries in this table for a given
+       line profile in case multiple bits are set in
+       adsl2LConfProfAtuTransSysEna for that profile."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.1.8"
+   ::= { adsl2LineConfProfModeSpecEntry 1 }
+
+adsl2LConfProfMaxNomPsdDs  OBJECT-TYPE
+   SYNTAX      Integer32(-600..-300)
+   UNITS       "0.1 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal transmit PSD in the downstream
+       direction during initialization and Showtime.  It ranges from
+       -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to
+       -30 dBm/Hz)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+   DEFVAL       { -300 }
+  ::= { adsl2LineConfProfModeSpecEntry 2 }
+
+adsl2LConfProfMaxNomPsdUs  OBJECT-TYPE
+   SYNTAX      Integer32(-600..-300)
+   UNITS       "0.1 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal transmit PSD in the upstream direction
+       during initialization and Showtime.  It ranges from -600 to
+       -300 units of 0.1 dBm/Hz (physical values are -60 to
+       -30 dBm/Hz)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+   DEFVAL       { -300 }
+   ::= { adsl2LineConfProfModeSpecEntry 3 }
+
+adsl2LConfProfMaxNomAtpDs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal aggregate transmit power in the
+       downstream direction during initialization and Showtime.  It
+       ranges from 0 to 255 units of 0.1 dBm (physical values are 0
+       to 25.5 dBm)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+   DEFVAL       { 255 }
+   ::= { adsl2LineConfProfModeSpecEntry 4 }
+
+adsl2LConfProfMaxNomAtpUs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal aggregate transmit power in the upstream
+       direction during initialization and Showtime.  It ranges from
+       0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
+       dBm)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+   DEFVAL       { 255 }
+   ::= { adsl2LineConfProfModeSpecEntry 5 }
+
+adsl2LConfProfMaxAggRxPwrUs  OBJECT-TYPE
+   SYNTAX      Integer32(-255..255 | 2147483647)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum upstream aggregate receive power over the relevant
+       set of sub-carriers.  The ATU-C should verify that the
+       upstream power cutback is such that this maximum aggregate
+       receive power value is honored.  It ranges from -255 to 255
+       units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
+       A value of 0x7FFFFFFF (2147483647) means that there is no
+       limit."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+   DEFVAL       { 255 }
+   ::= { adsl2LineConfProfModeSpecEntry 6 }
+
+adsl2LConfProfPsdMaskDs   OBJECT-TYPE
+   SYNTAX      Adsl2PsdMaskDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "The downstream PSD mask applicable at the U-C2 reference
+      point.
+     This parameter is used only for G.992.5, and it may impose PSD
+     restrictions (breakpoints) in addition to the Limit PSD mask
+     defined in G.992.5.
+     This is a string of 32 pairs of values in the following
+     structure:
+     Octets 0+1 - Index of 1st sub-carrier used in the context
+                  of a first breakpoint.
+     Octet 2    - The PSD reduction for the sub-carrier indicated in
+                  octets 0 and 1.
+     Octets 3-5 - Same, for a 2nd breakpoint.
+     Octets 6-8 - Same, for a 3rd breakpoint.
+     This architecture continues until octets 94-95, which are
+     associated with a 32nd breakpoint.
+     Each subcarrier index is an unsigned number in the range 1 to
+     NSCds.  Each PSD reduction value is in the range 0 (0dBm/Hz) to
+     255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.  Valid values are
+     in the range 0 to 190 (0 to -95dBm/Hz).
+     When the number of breakpoints is less than 32, all remaining
+     octets are set to the value 0.  Note that the content of this
+     object should be correlated with the sub-carriers mask and with
+     the RFI setup."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+     ::= { adsl2LineConfProfModeSpecEntry 7 }
+
+adsl2LConfProfPsdMaskUs   OBJECT-TYPE
+   SYNTAX      Adsl2PsdMaskUs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "The upstream PSD mask applicable at the U-R2 reference
+      point.
+     This parameter is used only for G.992.5, and it may impose PSD
+     restrictions (breakpoints) in addition to the Limit PSD mask
+     defined in G.992.5.
+     This is a string of 4 pairs of values in the following
+     structure:
+     Octets 0+1 - Index of 1st sub-carrier used in the context
+                  of a first breakpoint.
+     Octet 2    - The PSD reduction for the sub-carrier indicated in
+                  octets 0 and 1.
+     Octets 3-5 - Same, for a 2nd breakpoint.
+     Octets 6-8 - Same, for a 3rd breakpoint.
+     This architecture continues until octets 9-11, which are
+     associated with a 4th breakpoint.
+     Each subcarrier index is an unsigned number in the range 1 to
+
+     NSCus.  Each PSD reduction value is in the range 0 (0dBm/Hz) to
+     255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.  Valid values are
+     in the range 0 to 190 (0 to -95dBm/Hz).
+     When the number of breakpoints is less than 4, all remaining
+     octets are set to the value 0.  Note that the content of this
+     object should be correlated with the sub-carriers mask and with
+     the RFI setup."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1.2"
+     ::= { adsl2LineConfProfModeSpecEntry 8 }
+
+adsl2LConfProfPsdMaskSelectUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(1..9)
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "The selected upstream PSD mask.  This parameter is used only
+      for annexes J and M of G.992.3 and G.992.5, and the same
+      selection is used for all relevant enabled bits in
+      adsl2LConfProfAtuTransSysEna."
+   REFERENCE    "ITU-T G.997.1 (amendment 1), 7.3.1.2.10"
+   DEFVAL       { 1 }
+    ::= { adsl2LineConfProfModeSpecEntry 9 }
+
+adsl2LConfProfModeSpecRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A profile is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the profile.
+
+      Before a profile can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      templates."
+   ::= { adsl2LineConfProfModeSpecEntry 10 }
+
+------------------------------------------------
+--          adsl2ChConfProfileTable           --
+------------------------------------------------
+adsl2ChConfProfileTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2ChConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2ChConfProfileTable contains ADSL2 channel
+       profile configuration.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+   ::= { adsl2ProfileChannel 1 }
+
+adsl2ChConfProfileEntry  OBJECT-TYPE
+   SYNTAX      Adsl2ChConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2ChConfProfileTable contains ADSL2 channel
+       profile configuration.
+       A default profile with an index of 'DEFVAL' will
+       always exist, and its parameters will be set to vendor-
+       specific values, unless otherwise specified in this document."
+   INDEX  { adsl2ChConfProfProfileName }
+   ::= { adsl2ChConfProfileTable 1 }
+
+Adsl2ChConfProfileEntry  ::=
+   SEQUENCE {
+      adsl2ChConfProfProfileName          SnmpAdminString,
+      adsl2ChConfProfMinDataRateDs        Unsigned32,
+      adsl2ChConfProfMinDataRateUs        Unsigned32,
+      adsl2ChConfProfMinResDataRateDs     Unsigned32,
+      adsl2ChConfProfMinResDataRateUs     Unsigned32,
+      adsl2ChConfProfMaxDataRateDs        Unsigned32,
+      adsl2ChConfProfMaxDataRateUs        Unsigned32,
+      adsl2ChConfProfMinDataRateLowPwrDs  Unsigned32,
+      adsl2ChConfProfMaxDelayDs           Unsigned32,
+      adsl2ChConfProfMaxDelayUs           Unsigned32,
+      adsl2ChConfProfMinProtectionDs      Adsl2SymbolProtection,
+      adsl2ChConfProfMinProtectionUs      Adsl2SymbolProtection,
+      adsl2ChConfProfMaxBerDs             Adsl2MaxBer,
+      adsl2ChConfProfMaxBerUs             Adsl2MaxBer,
+      adsl2ChConfProfUsDataRateDs         Unsigned32,
+      adsl2ChConfProfDsDataRateDs         Unsigned32,
+      adsl2ChConfProfUsDataRateUs         Unsigned32,
+      adsl2ChConfProfDsDataRateUs         Unsigned32,
+      adsl2ChConfProfImaEnabled           TruthValue,
+      adsl2ChConfProfRowStatus            RowStatus
+   }
+
+adsl2ChConfProfProfileName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+   ::= { adsl2ChConfProfileEntry 1 }
+
+adsl2ChConfProfMinDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Data Rate on Downstream direction.  The minimum net
+       data rate for the bearer channel, coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 2 }
+
+adsl2ChConfProfMinDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Data Rate on Upstream direction.  The minimum net data
+       rate for the bearer channel, coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 3 }
+
+adsl2ChConfProfMinResDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Reserved Data Rate on Downstream direction.  The
+       minimum reserved net data rate for the bearer channel, coded
+       in bits/second.  This parameter is used only if the Rate
+       Adaptation Mode in the direction of the bearer channel (i.e.,
+       adsl2LConfProfRaModeDs) is set to dynamicRa."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 4 }
+
+adsl2ChConfProfMinResDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Reserved Data Rate on Upstream direction.  The minimum
+       reserved net data rate for the bearer channel, coded in
+       bits/second.  This parameter is used only if the Rate
+       Adaptation Mode in the direction of the bearer channel (i.e.,
+       adsl2LConfProfRaModeUs) is set to dynamicRa."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 5 }
+
+adsl2ChConfProfMaxDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Data Rate on Downstream direction.  The maximum net
+       data rate for the bearer channel, coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 6 }
+
+adsl2ChConfProfMaxDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Data Rate on Upstream direction.  The maximum net data
+       rate for the bearer channel, coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 7 }
+
+adsl2ChConfProfMinDataRateLowPwrDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Data Rate in Low Power state on Downstream direction.
+       The minimum net data rate for the bearer channel, coded in
+       bits/second, during the low power state (L1 in G.992.2, L2 in
+       G.992.3)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.1"
+   ::= { adsl2ChConfProfileEntry 8 }
+
+adsl2ChConfProfMaxDelayDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..63)
+   UNITS       "milliseconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Interleave Delay on Downstream direction.  The maximum
+       one-way interleaving delay introduced by the PMS-TC on
+       Downstream direction.  The ATUs shall choose the S (factor)
+       and D (depth) values such that the actual one-way interleaving
+       delay (adsl2ChStatusActDelay) is as close as possible to,
+       but less than or equal to, adsl2ChConfProfMaxDelayDs.  The
+       delay is coded in ms, with the value 0 indicating no delay
+       bound is being imposed."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.2"
+   ::= { adsl2ChConfProfileEntry 9 }
+
+adsl2ChConfProfMaxDelayUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..63)
+   UNITS       "milliseconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Interleave Delay on Upstream direction.  The maximum
+       one-way interleaving delay introduced by the PMS-TC on
+       Upstream direction.  The ATUs shall choose the S (factor) and
+       D (depth) values such that the actual one-way interleaving
+       delay (adsl2ChStatusActDelay) is as close as possible to,
+       but less than or equal to, adsl2ChConfProfMaxDelayUs.  The
+       delay is coded in ms, with the value 0 indicating no delay
+       bound is being imposed."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.2"
+   ::= { adsl2ChConfProfileEntry 10 }
+
+adsl2ChConfProfMinProtectionDs  OBJECT-TYPE
+   SYNTAX      Adsl2SymbolProtection
+   UNITS       "symbols"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Impulse Noise Protection on Downstream direction.  The
+       minimum impulse noise protection for the bearer channel,
+       expressed in symbols.  The parameter can take the following
+       values: noProtection (i.e., INP not required), halfSymbol
+       (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps
+       of 1 symbol."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.3"
+   DEFVAL       { noProtection }
+   ::= { adsl2ChConfProfileEntry 11 }
+
+adsl2ChConfProfMinProtectionUs  OBJECT-TYPE
+   SYNTAX      Adsl2SymbolProtection
+   UNITS       "symbols"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Impulse Noise Protection on Upstream direction.  The
+       minimum impulse noise protection for the bearer channel,
+       expressed in symbols.  The parameter can take the following
+       values: noProtection (i.e., INP not required), halfSymbol
+       (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps
+       of 1 symbol."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.3"
+   DEFVAL       { noProtection }
+   ::= { adsl2ChConfProfileEntry 12 }
+
+adsl2ChConfProfMaxBerDs  OBJECT-TYPE
+   SYNTAX      Adsl2MaxBer
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Bit Error Ratio on Downstream direction.  The maximum
+       bit error ratio for the bearer channel.  The parameter can
+       take the following values (for 1E-3, 1E-5 or 1E-7):
+          eminus3(1),
+          eminus5(2), or
+          eminus7(3)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.4"
+   DEFVAL       { eminus5 }
+  ::= { adsl2ChConfProfileEntry 13 }
+
+adsl2ChConfProfMaxBerUs  OBJECT-TYPE
+   SYNTAX      Adsl2MaxBer
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Bit Error Ratio on Upstream direction.  The maximum
+       bit error ratio for the bearer channel.  The parameter can
+       take the following values (for 1E-3, 1E-5 or 1E-7):
+          eminus3(1),
+          eminus5(2), or
+          eminus7(3)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.4"
+   DEFVAL       { eminus5 }
+   ::= { adsl2ChConfProfileEntry 14 }
+
+adsl2ChConfProfUsDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Up shift for downstream direction.  An
+       'Up-shift rate change' event is triggered when the actual
+       downstream data rate exceeds, by more than the threshold, the
+       data rate at the last entry into Showtime.  The parameter is
+       coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.6"
+   ::= { adsl2ChConfProfileEntry 15 }
+
+adsl2ChConfProfDsDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Down-shift for downstream direction.  A
+       'Down-shift rate change' event is triggered when the actual
+       downstream data rate is below the data rate at the last entry
+       into Showtime, by more than the threshold.  The parameter is
+       coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.6"
+   ::= { adsl2ChConfProfileEntry 16 }
+
+adsl2ChConfProfUsDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Up shift for upstream direction.  An
+       'Up-shift rate change' event is triggered when the actual
+       upstream data rate exceeds, by more than the threshold, the
+       data rate at the last entry into Showtime.  The parameter is
+       coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.6"
+   ::= { adsl2ChConfProfileEntry 17 }
+
+adsl2ChConfProfDsDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..200000000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Down-shift for upstream direction.  A
+       'Down-shift rate change' event is triggered when the actual
+       upstream data rate is below the data rate at the last entry
+       into Showtime, by more than the threshold.  The parameter is
+       coded in bits/second."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2.6"
+   ::= { adsl2ChConfProfileEntry 18 }
+
+adsl2ChConfProfImaEnabled  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "IMA Mode Enable.  The parameter enables the IMA operation mode
+       in the ATM Data Path.  Relevant only if the channel is an ATM
+       Data Path.  When in 'enable' state, the ATM data path should
+       comply with the requirements for IMA transmission."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.4.1"
+   DEFVAL       { false }
+ ::= { adsl2ChConfProfileEntry 19 }
+
+adsl2ChConfProfRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A profile is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the profile.
+
+      Before a profile can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      templates."
+   ::= { adsl2ChConfProfileEntry 20 }
+
+------------------------------------------------
+--        adsl2LineAlarmConfTemplateTable          --
+------------------------------------------------
+adsl2LineAlarmConfTemplateTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2LineAlarmConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineAlarmConfTemplateTable contains
+       ADSL2 line configuration templates.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+   ::= { adsl2ProfileAlarmConf 1 }
+
+adsl2LineAlarmConfTemplateEntry  OBJECT-TYPE
+   SYNTAX      Adsl2LineAlarmConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2LineAlarmConfTemplateTable contains ADSL2
+      line PM thresholds templates.
+      A default template with an index of 'DEFVAL' will
+      always exist, and its parameters will be set to vendor-
+      specific values, unless otherwise specified in this
+      document."
+   INDEX  { adsl2LAlarmConfTempTemplateName }
+   ::= { adsl2LineAlarmConfTemplateTable 1 }
+
+Adsl2LineAlarmConfTemplateEntry  ::=
+   SEQUENCE {
+      adsl2LAlarmConfTempTemplateName      SnmpAdminString,
+      adsl2LAlarmConfTempLineProfile       SnmpAdminString,
+      adsl2LAlarmConfTempChan1ConfProfile  SnmpAdminString,
+      adsl2LAlarmConfTempChan2ConfProfile  SnmpAdminString,
+      adsl2LAlarmConfTempChan3ConfProfile  SnmpAdminString,
+      adsl2LAlarmConfTempChan4ConfProfile  SnmpAdminString,
+      adsl2LAlarmConfTempRowStatus         RowStatus
+   }
+
+adsl2LAlarmConfTempTemplateName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+   ::= { adsl2LineAlarmConfTemplateEntry 1 }
+
+adsl2LAlarmConfTempLineProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2 Line
+       Thresholds Configuration Profile Table
+       (adsl2LineAlarmConfProfileTable) that applies to this ADSL2
+       line."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.4.1"
+   DEFVAL       { "DEFVAL" }
+   ::= { adsl2LineAlarmConfTemplateEntry 2 }
+
+adsl2LAlarmConfTempChan1ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Thresholds Configuration Profile Table
+       (adsl2ChAlarmConfProfileTable) that applies for ADSL2
+       bearer channel #1.  The channel profile name specified here
+       must match the name of an existing row in the
+       adsl2ChAlarmConfProfileTable table."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.4.1"
+   DEFVAL       { "DEFVAL" }
+   ::= { adsl2LineAlarmConfTemplateEntry 3 }
+
+adsl2LAlarmConfTempChan2ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Thresholds Configuration Profile Table
+       (adsl2ChAlarmConfProfileTable) that applies for ADSL2
+       bearer channel #2.  The channel profile name specified here
+       must match the name of an existing row in the
+       adsl2ChAlarmConfProfileTable table.  If the channel is unused,
+       then the object is set to a zero-length string."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.4.1"
+   DEFVAL       { "" }
+   ::= { adsl2LineAlarmConfTemplateEntry 4 }
+
+adsl2LAlarmConfTempChan3ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Thresholds Configuration Profile Table
+       (adsl2ChAlarmConfProfileTable) that applies for ADSL2
+       bearer channel #3.  The channel profile name specified here
+       must match the name of an existing row in the
+       adsl2ChAlarmConfProfileTable table.
+       This object may be set to a non-zero-length string only if
+       adsl2LAlarmConfTempChan2ConfProfile contains a non-zero-
+       length string."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.4.1"
+   DEFVAL       { "" }
+   ::= { adsl2LineAlarmConfTemplateEntry 5 }
+
+adsl2LAlarmConfTempChan4ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the ADSL2
+       Channel Thresholds Configuration Profile Table
+       (adsl2ChAlarmConfProfileTable) that applies for ADSL2
+       bearer channel #4.  The channel profile name specified here
+       must match the name of an existing row in the
+       adsl2ChAlarmConfProfileTable table.
+       This object may be set to a non-zero-length string only if
+       adsl2LAlarmConfTempChan3ConfProfile contains a non-zero-
+       length string."
+   REFERENCE    "DSL Forum TR-90, paragraph 5.4.1"
+   DEFVAL       { "" }
+   ::= { adsl2LineAlarmConfTemplateEntry 6 }
+
+adsl2LAlarmConfTempRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A template is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the template.
+
+      Before a template can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      lines."
+   ::= { adsl2LineAlarmConfTemplateEntry 7 }
+
+------------------------------------------------
+--      adsl2LineAlarmConfProfileTable        --
+------------------------------------------------
+
+adsl2LineAlarmConfProfileTable  OBJECT-TYPE
+     SYNTAX      SEQUENCE  OF  Adsl2LineAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "The table adsl2LineAlarmConfProfileTable contains ADSL2
+      line PM thresholds profiles.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+     ::= { adsl2ProfileAlarmConf 2 }
+
+adsl2LineAlarmConfProfileEntry  OBJECT-TYPE
+     SYNTAX      Adsl2LineAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "The table adsl2LineAlarmConfProfileTable contains ADSL2
+      line PM thresholds profiles.
+      A default profile with an index of 'DEFVAL' will
+      always exist, and its parameters will be set to vendor-
+      specific values, unless otherwise specified in this
+      document."
+     INDEX  { adsl2LineAlarmConfProfileName }
+     ::= { adsl2LineAlarmConfProfileTable 1 }
+
+Adsl2LineAlarmConfProfileEntry ::=
+     SEQUENCE {
+     adsl2LineAlarmConfProfileName                SnmpAdminString,
+     adsl2LineAlarmConfProfileAtucThresh15MinFecs
+                                          HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAtucThresh15MinEs
+                                          HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAtucThresh15MinSes
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAtucThresh15MinLoss
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAtucThresh15MinUas
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAturThresh15MinFecs
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAturThresh15MinEs
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAturThresh15MinSes
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAturThresh15MinLoss
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileAturThresh15MinUas
+                                           HCPerfIntervalThreshold,
+     adsl2LineAlarmConfProfileThresh15MinFailedFullInt   Unsigned32,
+     adsl2LineAlarmConfProfileThresh15MinFailedShrtInt   Unsigned32,
+     adsl2LineAlarmConfProfileRowStatus                   RowStatus
+     }
+
+adsl2LineAlarmConfProfileName  OBJECT-TYPE
+     SYNTAX      SnmpAdminString (SIZE(1..32))
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "This object identifies a row in this table."
+     ::= { adsl2LineAlarmConfProfileEntry 1 }
+
+adsl2LineAlarmConfProfileAtucThresh15MinFecs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MFecs counter,
+     when adsl2PMLCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 2 }
+
+adsl2LineAlarmConfProfileAtucThresh15MinEs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MEs counter,
+     when adsl2PMLCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 3 }
+
+adsl2LineAlarmConfProfileAtucThresh15MinSes  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MSes counter,
+     when adsl2PMLCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 4 }
+
+adsl2LineAlarmConfProfileAtucThresh15MinLoss  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MLoss counter,
+     when adsl2PMLCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 5 }
+
+adsl2LineAlarmConfProfileAtucThresh15MinUas  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MUas counter,
+     when adsl2PMLCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 6 }
+
+adsl2LineAlarmConfProfileAturThresh15MinFecs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MFecs counter,
+     when adsl2PMLCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 7 }
+
+adsl2LineAlarmConfProfileAturThresh15MinEs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MEs counter,
+     when adsl2PMLCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 8 }
+
+adsl2LineAlarmConfProfileAturThresh15MinSes  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MSes counter,
+     when adsl2PMLCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 9 }
+
+adsl2LineAlarmConfProfileAturThresh15MinLoss  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MLoss counter,
+     when adsl2PMLCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 10 }
+
+adsl2LineAlarmConfProfileAturThresh15MinUas  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurr15MUas counter,
+     when adsl2PMLCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 11 }
+
+adsl2LineAlarmConfProfileThresh15MinFailedFullInt  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurrInit15MfailedFullInits
+     counter.
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 12 }
+
+adsl2LineAlarmConfProfileThresh15MinFailedShrtInt  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMLCurrInit15MFailedShortInits
+     counter.
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.1"
+   DEFVAL       { 0 }
+     ::= { adsl2LineAlarmConfProfileEntry 13 }
+
+adsl2LineAlarmConfProfileRowStatus  OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A profile is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the profile.
+
+      Before a profile can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      templates."
+     ::= { adsl2LineAlarmConfProfileEntry 14 }
+
+------------------------------------------------
+--      adsl2ChAlarmConfProfileTable        --
+
+------------------------------------------------
+
+adsl2ChAlarmConfProfileTable  OBJECT-TYPE
+     SYNTAX      SEQUENCE  OF  Adsl2ChAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "The table adsl2ChAlarmConfProfileTable contains ADSL2
+      channel PM thresholds profiles.
+
+       Entries in this table MUST be maintained in a
+       persistent manner."
+     ::= { adsl2ProfileAlarmConf 3 }
+
+adsl2ChAlarmConfProfileEntry  OBJECT-TYPE
+     SYNTAX      Adsl2ChAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "The table adsl2ChAlarmConfProfileTable contains ADSL2
+      channel PM thresholds profiles.
+      A default profile with an index of 'DEFVAL' will
+      always exist, and its parameters will be set to vendor-
+      specific values, unless otherwise specified in this document."
+     INDEX  { adsl2ChAlarmConfProfileName }
+     ::= { adsl2ChAlarmConfProfileTable 1 }
+
+Adsl2ChAlarmConfProfileEntry ::=
+     SEQUENCE {
+     adsl2ChAlarmConfProfileName
+                                                     SnmpAdminString,
+     adsl2ChAlarmConfProfileAtucThresh15MinCodingViolations
+                                                     Unsigned32,
+     adsl2ChAlarmConfProfileAtucThresh15MinCorrected Unsigned32,
+     adsl2ChAlarmConfProfileAturThresh15MinCodingViolations
+                                                     Unsigned32,
+     adsl2ChAlarmConfProfileAturThresh15MinCorrected Unsigned32,
+     adsl2ChAlarmConfProfileRowStatus                RowStatus
+     }
+
+adsl2ChAlarmConfProfileName  OBJECT-TYPE
+     SYNTAX      SnmpAdminString (SIZE(1..32))
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "This object identifies a row in this table."
+     ::= { adsl2ChAlarmConfProfileEntry 1 }
+
+adsl2ChAlarmConfProfileAtucThresh15MinCodingViolations OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMChCurr15MCodingViolations
+     counter, when adsl2PMChCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2"
+   DEFVAL       { 0 }
+     ::= { adsl2ChAlarmConfProfileEntry 2 }
+
+adsl2ChAlarmConfProfileAtucThresh15MinCorrected  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMChCurr15MCorrectedBlocks
+     counter, when adsl2PMChCurrUnit is atuc(1).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2"
+   DEFVAL       { 0 }
+     ::= { adsl2ChAlarmConfProfileEntry 3 }
+
+adsl2ChAlarmConfProfileAturThresh15MinCodingViolations  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMChCurr15MCodingViolations
+     counter, when adsl2PMChCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2"
+   DEFVAL       { 0 }
+     ::= { adsl2ChAlarmConfProfileEntry 4 }
+
+adsl2ChAlarmConfProfileAturThresh15MinCorrected  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the adsl2PMChCurr15MCorrectedBlocks
+     counter, when adsl2PMChCurrUnit is atur(2).
+     The value 0 means that no threshold is specified for the
+     associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.3.2"
+   DEFVAL       { 0 }
+     ::= { adsl2ChAlarmConfProfileEntry 5 }
+
+adsl2ChAlarmConfProfileRowStatus  OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+      "This object is used to create a new row or to modify or
+      delete an existing row in this table.
+
+      A profile is activated by setting this object to 'active'.
+      When 'active' is set, the system will validate the profile.
+
+      Before a profile can be deleted or taken out of service
+      (by setting this object to 'destroy' or 'notInService'),
+      it must first be unreferenced from all associated
+      templates."
+     ::= { adsl2ChAlarmConfProfileEntry 6 }
+
+------------------------------------------------
+--          PM line current counters          --
+------------------------------------------------
+adsl2PMLineCurrTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMLineCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineCurrTable contains current Performance
+       Monitoring results of ADSL2 lines."
+   ::= { adsl2PMLine 1 }
+
+adsl2PMLineCurrEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMLineCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineCurrTable contains current Performance
+       Monitoring results of ADSL2 lines.
+       The index of this table consists of an interface index, where
+       the interface has an ifType of adsl2plus(238), along with a
+       termination unit.
+       The PM counters in the table are not reset even when the XTU
+       is reinitialized.  They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   INDEX  { ifIndex, adsl2PMLCurrUnit }
+   ::= { adsl2PMLineCurrTable 1 }
+
+Adsl2PMLineCurrEntry  ::=
+   SEQUENCE {
+      adsl2PMLCurrUnit                    Adsl2Unit,
+      adsl2PMLCurrValidIntervals          Unsigned32,
+      adsl2PMLCurrInvalidIntervals        Unsigned32,
+      adsl2PMLCurr15MTimeElapsed          HCPerfTimeElapsed,
+      adsl2PMLCurr15MFecs                 Counter32,
+      adsl2PMLCurr15MEs                   Counter32,
+      adsl2PMLCurr15MSes                  Counter32,
+      adsl2PMLCurr15MLoss                 Counter32,
+      adsl2PMLCurr15MUas                  Counter32,
+      adsl2PMLCurr1DayValidIntervals      Unsigned32,
+      adsl2PMLCurr1DayInvalidIntervals    Unsigned32,
+      adsl2PMLCurr1DayTimeElapsed         HCPerfTimeElapsed,
+      adsl2PMLCurr1DayFecs                Counter32,
+      adsl2PMLCurr1DayEs                  Counter32,
+      adsl2PMLCurr1DaySes                 Counter32,
+      adsl2PMLCurr1DayLoss                Counter32,
+      adsl2PMLCurr1DayUas                 Counter32
+   }
+
+adsl2PMLCurrUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit atuc(1) or atur(2)."
+   ::= { adsl2PMLineCurrEntry 1 }
+
+adsl2PMLCurrValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Valid intervals."
+   ::= { adsl2PMLineCurrEntry 2 }
+
+adsl2PMLCurrInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Invalid intervals."
+   ::= { adsl2PMLineCurrEntry 3 }
+
+adsl2PMLCurr15MTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds since this PM interval began.
+       Note that the PM counters are not reset even when the XTU
+       is reinitialized.  They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMLineCurrEntry 4 }
+
+adsl2PMLCurr15MFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was at least
+       one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 5 }
+
+adsl2PMLCurr15MEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >=1 OR LPR >= 1
+          ATU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 .
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 6 }
+
+adsl2PMLCurr15MSes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1
+          ATU-R: (FEBE summed over all bearer channels) >= 18 OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 .
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 7 }
+
+adsl2PMLCurr15MLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was LOS (or
+       LOS-FE for ATU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 8 }
+
+adsl2PMLCurr15MUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this
+       interval.  Unavailability begins at the onset of 10
+       contiguous severely-errored seconds, and ends at the
+       onset of 10 contiguous seconds with no severely-errored
+       seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 9 }
+
+adsl2PMLCurr1DayValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Valid intervals."
+   ::= { adsl2PMLineCurrEntry 10 }
+
+adsl2PMLCurr1DayInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Invalid intervals."
+   ::= { adsl2PMLineCurrEntry 11 }
+
+adsl2PMLCurr1DayTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds since this PM interval began.
+       Note that the PM counters are not reset even when the XTU
+       is reinitialized.  They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMLineCurrEntry 12 }
+
+adsl2PMLCurr1DayFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was at least
+       one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 13 }
+
+adsl2PMLCurr1DayEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1
+          ATU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 14 }
+
+adsl2PMLCurr1DaySes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR
+                  LOS >= 1 OR SEF >= 1 OR LPR >= 1
+          ATU-R: (FEBE summed over all bearer channels) >= 18 OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 15 }
+
+adsl2PMLCurr1DayLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was LOS (or
+       LOS-FE for ATU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 16 }
+
+adsl2PMLCurr1DayUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this interval.
+       Unavailability begins at the onset of 10 contiguous severely-
+       errored seconds, and ends at the onset of 10 contiguous
+       seconds with no severely-errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrEntry 17 }
+
+------------------------------------------------
+--          PM line init current counters     --
+------------------------------------------------
+
+adsl2PMLineCurrInitTable   OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMLineCurrInitEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineCurrInitTable contains current
+       initialization counters of the ADSL2 line.
+       The PM counters in the table are not reset even when the XTU
+       is reinitialized.  They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMLine 2 }
+
+adsl2PMLineCurrInitEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMLineCurrInitEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineCurrInitTable contains current
+       initialization counters of the ADSL2 line.
+       The index of this table consists of an interface index, where
+       the interface has an ifType of adsl2plus(238), and a
+       termination unit."
+   INDEX  { ifIndex }
+   ::= { adsl2PMLineCurrInitTable 1 }
+
+Adsl2PMLineCurrInitEntry  ::=
+   SEQUENCE {
+      adsl2PMLCurrInit15MTimeElapsed          Unsigned32,
+      adsl2PMLCurrInit15MFullInits            Unsigned32,
+      adsl2PMLCurrInit15MFailedFullInits      Unsigned32,
+      adsl2PMLCurrInit15MShortInits           Unsigned32,
+      adsl2PMLCurrInit15MFailedShortInits     Unsigned32,
+      adsl2PMLCurrInit1DayTimeElapsed         Unsigned32,
+      adsl2PMLCurrInit1DayFullInits           Unsigned32,
+      adsl2PMLCurrInit1DayFailedFullInits     Unsigned32,
+      adsl2PMLCurrInit1DayShortInits          Unsigned32,
+      adsl2PMLCurrInit1DayFailedShortInits    Unsigned32
+   }
+
+adsl2PMLCurrInit15MTimeElapsed  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds since this PM interval began.
+       Note that the PM counters are not reset even when the XTU
+       is reinitialized.  They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMLineCurrInitEntry 1 }
+
+adsl2PMLCurrInit15MFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 2 }
+
+adsl2PMLCurrInit15MFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 3 }
+
+adsl2PMLCurrInit15MShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 4 }
+
+adsl2PMLCurrInit15MFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 5 }
+
+adsl2PMLCurrInit1DayTimeElapsed  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds since this PM interval began.
+       Note that the PM counters are not reset even when the XTU
+       is reinitialized.  They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMLineCurrInitEntry 6 }
+
+adsl2PMLCurrInit1DayFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 7 }
+
+adsl2PMLCurrInit1DayFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 8 }
+
+adsl2PMLCurrInit1DayShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 9 }
+
+adsl2PMLCurrInit1DayFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineCurrInitEntry 10 }
+
+-------------------------------------------
+--       PM line history 15 Minutes      --
+-------------------------------------------
+adsl2PMLineHist15MinTable    OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMLineHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineHist15MinTable contains PM line history
+      for 15min intervals of the ADSL2 line."
+   ::= { adsl2PMLine 3 }
+
+adsl2PMLineHist15MinEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMLineHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineHist15MinTable contains PM line history
+       for 15min intervals of the ADSL2 line.
+       The index of this table consists of an interface index, where
+       the interface has an ifType of adsl2plus(238), along with a
+       termination unit, and an interval number."
+   INDEX  { ifIndex,
+            adsl2PMLHist15MUnit,
+            adsl2PMLHist15MInterval }
+   ::= { adsl2PMLineHist15MinTable 1 }
+
+Adsl2PMLineHist15MinEntry  ::=
+   SEQUENCE {
+      adsl2PMLHist15MUnit                 Adsl2Unit,
+      adsl2PMLHist15MInterval             Unsigned32,
+      adsl2PMLHist15MMonitoredTime        Unsigned32,
+      adsl2PMLHist15MFecs                 Counter32,
+      adsl2PMLHist15MEs                   Counter32,
+      adsl2PMLHist15MSes                  Counter32,
+      adsl2PMLHist15MLoss                 Counter32,
+      adsl2PMLHist15MUas                  Counter32,
+      adsl2PMLHist15MValidInterval        TruthValue
+   }
+
+adsl2PMLHist15MUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit atuc(1) or atur(2)."
+   ::= { adsl2PMLineHist15MinEntry 1 }
+
+adsl2PMLHist15MInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { adsl2PMLineHist15MinEntry 2 }
+
+adsl2PMLHist15MMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { adsl2PMLineHist15MinEntry 3 }
+
+adsl2PMLHist15MFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was at least
+       one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist15MinEntry 4 }
+
+adsl2PMLHist15MEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1
+          ATU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist15MinEntry 5 }
+
+adsl2PMLHist15MSes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1
+          ATU-R: (FEBE summed over all bearer channels) >= 18 OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist15MinEntry 6 }
+
+adsl2PMLHist15MLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was LOS (or
+       LOS-FE for ATU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist15MinEntry 7 }
+
+adsl2PMLHist15MUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this interval.
+       Unavailability begins at the onset of 10 contiguous severely-
+       errored seconds, and ends at the onset of 10 contiguous
+       seconds with no severely-errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist15MinEntry 8 }
+
+adsl2PMLHist15MValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { adsl2PMLineHist15MinEntry 9 }
+
+---------------------------------------
+--       PM line history 1 Day       --
+---------------------------------------
+adsl2PMLineHist1DayTable     OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMLineHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineHist1DayTable contains PM line history
+       for 24-hour intervals of the ADSL2 line."
+   ::= { adsl2PMLine 4 }
+
+adsl2PMLineHist1DayEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMLineHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineHist1DayTable contains PM line history
+       for 24-hour intervals of the ADSL2 line.
+
+       The index of this table consists of an interface index, where
+       the interface has an ifType of adsl2plus(238), along with a
+       termination unit, and an interval number."
+   INDEX  { ifIndex,
+            adsl2PMLHist1DUnit,
+            adsl2PMLHist1DInterval }
+   ::= { adsl2PMLineHist1DayTable 1 }
+
+Adsl2PMLineHist1DayEntry  ::=
+   SEQUENCE {
+      adsl2PMLHist1DUnit              Adsl2Unit,
+      adsl2PMLHist1DInterval          Unsigned32,
+      adsl2PMLHist1DMonitoredTime     Unsigned32,
+      adsl2PMLHist1DFecs              Counter32,
+      adsl2PMLHist1DEs                Counter32,
+      adsl2PMLHist1DSes               Counter32,
+      adsl2PMLHist1DLoss              Counter32,
+      adsl2PMLHist1DUas               Counter32,
+      adsl2PMLHist1DValidInterval     TruthValue
+   }
+
+adsl2PMLHist1DUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { adsl2PMLineHist1DayEntry 1 }
+
+adsl2PMLHist1DInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { adsl2PMLineHist1DayEntry 2 }
+
+adsl2PMLHist1DMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { adsl2PMLineHist1DayEntry 3 }
+
+adsl2PMLHist1DFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was at least
+       one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist1DayEntry 4 }
+
+adsl2PMLHist1DEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1
+          ATU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist1DayEntry 5 }
+
+adsl2PMLHist1DSes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was:
+          ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR
+                  LOS >= 1 OR SEF >> 1 OR LPR >= 1
+          ATU-R: (FEBE summed over all bearer channels) >= 18 OR
+                  LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist1DayEntry 6 }
+
+adsl2PMLHist1DLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval where there was LOS (or
+       LOS-FE for ATU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist1DayEntry 7 }
+
+adsl2PMLHist1DUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this interval.
+       Unavailability begins at the onset of 10 contiguous severely-
+       errored seconds, and ends at the onset of 10 contiguous
+       seconds with no severely-errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineHist1DayEntry 8 }
+
+adsl2PMLHist1DValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { adsl2PMLineHist1DayEntry 9 }
+
+-------------------------------------------
+--     PM line init history 15 Minutes   --
+-------------------------------------------
+
+adsl2PMLineInitHist15MinTable      OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMLineInitHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineInitHist15MinTable contains PM line
+       initialization history for 15-minute intervals of the ADSL2
+       line."
+   ::= { adsl2PMLine 5 }
+
+adsl2PMLineInitHist15MinEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMLineInitHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineInitHist15MinTable contains PM line
+
+       initialization history for 15 minutes intervals of the ADSL2
+       line.
+       The index of this table consists of an interface index, where
+       the interface has an ifType of adsl2plus(238), and an interval
+       number."
+   INDEX  { ifIndex,
+            adsl2PMLHistInit15MInterval }
+   ::= { adsl2PMLineInitHist15MinTable 1 }
+
+Adsl2PMLineInitHist15MinEntry  ::=
+   SEQUENCE {
+      adsl2PMLHistInit15MInterval              Unsigned32,
+      adsl2PMLHistInit15MMonitoredTime         Unsigned32,
+      adsl2PMLHistInit15MFullInits             Unsigned32,
+      adsl2PMLHistInit15MFailedFullInits       Unsigned32,
+      adsl2PMLHistInit15MShortInits            Unsigned32,
+      adsl2PMLHistInit15MFailedShortInits      Unsigned32,
+      adsl2PMLHistInit15MValidInterval         TruthValue
+   }
+
+adsl2PMLHistInit15MInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { adsl2PMLineInitHist15MinEntry 1 }
+
+adsl2PMLHistInit15MMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { adsl2PMLineInitHist15MinEntry 2 }
+
+adsl2PMLHistInit15MFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist15MinEntry 3 }
+
+adsl2PMLHistInit15MFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist15MinEntry 4 }
+
+adsl2PMLHistInit15MShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist15MinEntry 5 }
+
+adsl2PMLHistInit15MFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist15MinEntry 6 }
+
+adsl2PMLHistInit15MValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { adsl2PMLineInitHist15MinEntry 7 }
+
+-------------------------------------------
+--       PM line init history 1 Day      --
+-------------------------------------------
+adsl2PMLineInitHist1DayTable       OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMLineInitHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineInitHist1DayTable contains PM line
+       initialization history for 24-hour intervals of the ADSL2
+       line."
+   ::= { adsl2PMLine 6 }
+
+adsl2PMLineInitHist1DayEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMLineInitHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMLineInitHist1DayTable contains PM line
+       initialization history for 24-hour intervals of the ADSL2
+       line.
+       The index of this table consists of an interface index, where
+       the interface has an ifType of adsl2plus(238), and an interval
+       number."
+   INDEX  { ifIndex,
+            adsl2PMLHistinit1DInterval }
+   ::= { adsl2PMLineInitHist1DayTable 1 }
+
+Adsl2PMLineInitHist1DayEntry  ::=
+   SEQUENCE {
+      adsl2PMLHistinit1DInterval              Unsigned32,
+      adsl2PMLHistinit1DMonitoredTime         Unsigned32,
+      adsl2PMLHistinit1DFullInits             Unsigned32,
+      adsl2PMLHistinit1DFailedFullInits       Unsigned32,
+      adsl2PMLHistinit1DShortInits            Unsigned32,
+      adsl2PMLHistinit1DFailedShortInits      Unsigned32,
+      adsl2PMLHistinit1DValidInterval         TruthValue
+   }
+
+adsl2PMLHistinit1DInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { adsl2PMLineInitHist1DayEntry 1 }
+
+adsl2PMLHistinit1DMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { adsl2PMLineInitHist1DayEntry 2 }
+
+adsl2PMLHistinit1DFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+    ::= { adsl2PMLineInitHist1DayEntry 3 }
+
+adsl2PMLHistinit1DFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist1DayEntry 4 }
+
+adsl2PMLHistinit1DShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist1DayEntry 5 }
+
+adsl2PMLHistinit1DFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.1"
+   ::= { adsl2PMLineInitHist1DayEntry 6 }
+
+adsl2PMLHistinit1DValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { adsl2PMLineInitHist1DayEntry 7 }
+
+---------------------------------------------------
+--          PM channel current counters          --
+---------------------------------------------------
+adsl2PMChCurrTable        OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMChCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMChCurrTable contains current Performance
+       Monitoring results of the ADSL2 channel.
+       The PM counters in the table are not reset even when the XTU
+       is reinitialized. They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMChannel 1 }
+
+adsl2PMChCurrEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMChCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMChCurrTable contains current Performance
+       Monitoring results of the ADSL2 channel.
+       The index of this table consists of an interface index, where
+       the interface has an ifType value that is applicable
+       for a DSL channel, along with a termination unit."
+   INDEX  { ifIndex, adsl2PMChCurrUnit }
+   ::= { adsl2PMChCurrTable 1 }
+
+Adsl2PMChCurrEntry  ::=
+   SEQUENCE {
+      adsl2PMChCurrUnit                     Adsl2Unit,
+      adsl2PMChCurrValidIntervals           Unsigned32,
+      adsl2PMChCurrInvalidIntervals         Unsigned32,
+      adsl2PMChCurr15MTimeElapsed           HCPerfTimeElapsed,
+      adsl2PMChCurr15MCodingViolations      Unsigned32,
+      adsl2PMChCurr15MCorrectedBlocks       Unsigned32,
+      adsl2PMChCurr1DayValidIntervals       Unsigned32,
+      adsl2PMChCurr1DayInvalidIntervals     Unsigned32,
+      adsl2PMChCurr1DayTimeElapsed          HCPerfTimeElapsed,
+      adsl2PMChCurr1DayCodingViolations     Unsigned32,
+      adsl2PMChCurr1DayCorrectedBlocks      Unsigned32
+   }
+
+adsl2PMChCurrUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+   "The termination unit."
+   ::= { adsl2PMChCurrEntry 1 }
+
+adsl2PMChCurrValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Valid intervals."
+   ::= { adsl2PMChCurrEntry 2 }
+
+adsl2PMChCurrInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Invalid intervals."
+    ::= { adsl2PMChCurrEntry 3 }
+
+adsl2PMChCurr15MTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds since this PM interval began.
+       Note that the PM counters are not reset even when the XTU
+       is reinitialized. They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMChCurrEntry 4 }
+
+adsl2PMChCurr15MCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited
+       during UAS or SES.  If the CRC is applied over multiple
+       channels, then each related CRC-8 (or FEBE) anomaly should
+       increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+  ::= { adsl2PMChCurrEntry 5 }
+
+adsl2PMChCurr15MCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for ATU-R) anomalies (corrected code words)
+       occurring in the channel during the interval.  This parameter
+       is inhibited during UAS or SES.  If the FEC is applied over
+       multiple channels, then each related FEC (or FFEC) anomaly
+       should increment each of the counters related to the
+       individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChCurrEntry 6 }
+
+adsl2PMChCurr1DayValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Valid intervals."
+   ::= { adsl2PMChCurrEntry 7 }
+
+adsl2PMChCurr1DayInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Invalid intervals."
+   ::= { adsl2PMChCurrEntry 8 }
+
+adsl2PMChCurr1DayTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds since this PM interval began.
+       Note that the PM counters are not reset even when the XTU
+       is reinitialized. They are reinitialized only when the
+       agent itself is reset or reinitialized."
+   ::= { adsl2PMChCurrEntry 9 }
+
+adsl2PMChCurr1DayCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited
+       during UAS or SES.  If the CRC is applied over multiple
+       channels, then each related CRC-8 (or FEBE) anomaly should
+
+       increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChCurrEntry 10 }
+
+adsl2PMChCurr1DayCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for ATU-R) anomalies (corrected code words)
+       occurring in the channel during the interval.  This parameter
+       is inhibited during UAS or SES.  If the FEC is applied over
+       multiple channels, then each related FEC (or FFEC) anomaly
+       should increment each of the counters related to the
+       individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChCurrEntry 11 }
+
+-------------------------------------------
+--    PM channel history 15 Minutes      --
+-------------------------------------------
+adsl2PMChHist15MinTable         OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMChHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMChCurrTable contains current Performance
+       Monitoring results of the ADSL2 channel."
+   ::= { adsl2PMChannel 2 }
+
+adsl2PMChHist15MinEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMChHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMChCurrTable contains current Performance
+       Monitoring results of the ADSL2 channel.
+       The index of this table consists of an interface index, where
+       the interface has an ifType value that is applicable
+       for a DSL channel, along with a termination unit, and the
+       interval number."
+   INDEX  { ifIndex,
+            adsl2PMChHist15MUnit,
+            adsl2PMChHist15MInterval }
+   ::= { adsl2PMChHist15MinTable 1 }
+
+Adsl2PMChHist15MinEntry  ::=
+   SEQUENCE {
+      adsl2PMChHist15MUnit                     Adsl2Unit,
+      adsl2PMChHist15MInterval                 Unsigned32,
+      adsl2PMChHist15MMonitoredTime            Unsigned32,
+      adsl2PMChHist15MCodingViolations         Unsigned32,
+      adsl2PMChHist15MCorrectedBlocks          Unsigned32,
+      adsl2PMChHist15MValidInterval            TruthValue
+   }
+
+adsl2PMChHist15MUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { adsl2PMChHist15MinEntry 1 }
+
+adsl2PMChHist15MInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { adsl2PMChHist15MinEntry 2 }
+
+adsl2PMChHist15MMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { adsl2PMChHist15MinEntry 3 }
+
+adsl2PMChHist15MCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited
+       during UAS or SES.  If the CRC is applied over multiple
+       channels, then each related CRC-8 (or FEBE) anomaly should
+       increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChHist15MinEntry 4 }
+
+adsl2PMChHist15MCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for ATU-R) anomalies (corrected code words)
+       occurring in the channel during the interval.  This parameter
+       is inhibited during UAS or SES.  If the FEC is applied over
+       multiple channels, then each related FEC (or FFEC) anomaly
+       should increment each of the counters related to the
+       individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChHist15MinEntry 5 }
+
+adsl2PMChHist15MValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { adsl2PMChHist15MinEntry 6 }
+
+------------------------------------------
+--        PM channel history 1 Day      --
+------------------------------------------
+adsl2PMChHist1DTable         OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Adsl2PMChHist1DEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMChHist1DayTable contains PM channel history
+       for 1-day intervals of ADSL2."
+   ::= { adsl2PMChannel 3 }
+
+adsl2PMChHist1DEntry  OBJECT-TYPE
+   SYNTAX      Adsl2PMChHist1DEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table adsl2PMChHist1DayTable contains PM channel history
+       for 1-day intervals of ADSL2.
+       The index of this table consists of an interface index, where
+       the interface has an ifType value that is applicable
+       for a DSL channel, along with a termination unit, and the
+       interval number."
+   INDEX  { ifIndex,
+            adsl2PMChHist1DUnit,
+            adsl2PMChHist1DInterval }
+   ::= { adsl2PMChHist1DTable 1 }
+
+Adsl2PMChHist1DEntry  ::=
+   SEQUENCE {
+      adsl2PMChHist1DUnit                      Adsl2Unit,
+      adsl2PMChHist1DInterval                  Unsigned32,
+      adsl2PMChHist1DMonitoredTime             Unsigned32,
+      adsl2PMChHist1DCodingViolations          Unsigned32,
+      adsl2PMChHist1DCorrectedBlocks           Unsigned32,
+      adsl2PMChHist1DValidInterval             TruthValue
+   }
+
+adsl2PMChHist1DUnit  OBJECT-TYPE
+   SYNTAX      Adsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+    ::= { adsl2PMChHist1DEntry 1 }
+
+adsl2PMChHist1DInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { adsl2PMChHist1DEntry 2 }
+
+adsl2PMChHist1DMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { adsl2PMChHist1DEntry 3 }
+
+adsl2PMChHist1DCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited
+       during UAS or SES.  If the CRC is applied over multiple
+
+       channels, then each related CRC-8 (or FEBE) anomaly should
+       increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChHist1DEntry 4 }
+
+adsl2PMChHist1DCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for ATU-R) anomalies (corrected code words)
+       occurring in the channel during the interval.  This parameter
+       is inhibited during UAS or SES.  If the FEC is applied over
+       multiple channels, then each related FEC (or FFEC) anomaly
+       should increment each of the counters related to the
+       individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph 7.2.2"
+   ::= { adsl2PMChHist1DEntry 5 }
+
+adsl2PMChHist1DValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { adsl2PMChHist1DEntry 6 }
+
+-------------------------------------------
+--          Notifications Group          --
+-------------------------------------------
+
+adsl2LinePerfFECSThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MFecs,
+   adsl2LineAlarmConfProfileAtucThresh15MinFecs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the FEC seconds threshold
+      has been reached/exceeded for the referred ATU-C."
+   ::= { adsl2Notifications 1 }
+
+adsl2LinePerfFECSThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+
+   adsl2PMLCurr15MFecs,
+   adsl2LineAlarmConfProfileAturThresh15MinFecs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the FEC seconds threshold
+      has been reached/exceeded for the referred ATU-R."
+   ::= { adsl2Notifications 2 }
+
+adsl2LinePerfESThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MEs,
+   adsl2LineAlarmConfProfileAtucThresh15MinEs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the errored seconds threshold
+      has been reached/exceeded for the referred ATU-C."
+   ::= { adsl2Notifications 3 }
+
+adsl2LinePerfESThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MEs,
+   adsl2LineAlarmConfProfileAturThresh15MinEs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the errored seconds threshold
+      has been reached/exceeded for the referred ATU-R."
+   ::= { adsl2Notifications 4 }
+
+adsl2LinePerfSESThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MSes,
+   adsl2LineAlarmConfProfileAtucThresh15MinSes
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the severely-errored seconds
+      threshold has been reached/exceeded for the referred ATU-C."
+   ::= { adsl2Notifications 5 }
+
+adsl2LinePerfSESThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+
+   adsl2PMLCurr15MSes,
+   adsl2LineAlarmConfProfileAturThresh15MinSes
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the severely-errored seconds
+      threshold has been reached/exceeded for the referred ATU-R."
+   ::= { adsl2Notifications 6 }
+
+adsl2LinePerfLOSSThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MLoss,
+   adsl2LineAlarmConfProfileAtucThresh15MinLoss
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the LOS seconds
+      threshold has been reached/exceeded for the referred ATU-C."
+   ::= { adsl2Notifications 7 }
+
+adsl2LinePerfLOSSThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MLoss,
+   adsl2LineAlarmConfProfileAturThresh15MinLoss
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the LOS seconds
+      threshold has been reached/exceeded for the referred ATU-R."
+   ::= { adsl2Notifications 8 }
+
+adsl2LinePerfUASThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurr15MUas,
+   adsl2LineAlarmConfProfileAtucThresh15MinUas
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the unavailable seconds
+      threshold has been reached/exceeded for the referred ATU-C."
+   ::= { adsl2Notifications 9 }
+
+adsl2LinePerfUASThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+
+   adsl2PMLCurr15MUas,
+   adsl2LineAlarmConfProfileAturThresh15MinUas
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the unavailable seconds
+      threshold has been reached/exceeded for the referred ATU-R."
+   ::= { adsl2Notifications 10 }
+
+adsl2LinePerfCodingViolationsThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMChCurr15MCodingViolations,
+   adsl2ChAlarmConfProfileAtucThresh15MinCodingViolations
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the coding violations
+      threshold has been reached/exceeded for the referred ATU-C."
+   ::= { adsl2Notifications 11 }
+
+adsl2LinePerfCodingViolationsThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMChCurr15MCodingViolations,
+   adsl2ChAlarmConfProfileAturThresh15MinCodingViolations
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the coding violations
+      threshold has been reached/exceeded for the referred ATU-R."
+   ::= { adsl2Notifications 12 }
+
+adsl2LinePerfCorrectedThreshAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMChCurr15MCorrectedBlocks,
+   adsl2ChAlarmConfProfileAtucThresh15MinCorrected
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the corrected blocks
+      (FEC events) threshold has been reached/exceeded for the
+      referred ATU-C."
+   ::= { adsl2Notifications 13 }
+
+adsl2LinePerfCorrectedThreshAtur NOTIFICATION-TYPE
+   OBJECTS
+
+   {
+   adsl2PMChCurr15MCorrectedBlocks,
+   adsl2ChAlarmConfProfileAturThresh15MinCorrected
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the corrected blocks
+      (FEC events) threshold has been reached/exceeded for the
+      referred ATU-R."
+   ::= { adsl2Notifications 14 }
+
+adsl2LinePerfFailedFullInitThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurrInit15MFailedFullInits,
+   adsl2LineAlarmConfProfileThresh15MinFailedFullInt
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the failed full
+      initializations threshold has been reached/exceeded for the
+      referred ADSL/ADSL2 or ADSL2+ line."
+   ::= { adsl2Notifications 15 }
+
+adsl2LinePerfFailedShortInitThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2PMLCurrInit15MFailedShortInits,
+   adsl2LineAlarmConfProfileThresh15MinFailedShrtInt
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the failed short
+      initializations threshold has been reached/exceeded for the
+      referred ADSL/ADSL2 or ADSL2+ line."
+   ::= { adsl2Notifications 16 }
+
+adsl2LineStatusChangeAtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2LineStatusAtuc
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that a status change is
+      detected for the referred ATU-C."
+   ::= { adsl2Notifications 17 }
+
+adsl2LineStatusChangeAtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   adsl2LineStatusAtur
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that a status change is
+      detected for the referred ATU-R."
+   ::= { adsl2Notifications 18 }
+
+   -- conformance information
+
+   adsl2Groups OBJECT IDENTIFIER ::= { adsl2Conformance 1 }
+   adsl2Compliances OBJECT IDENTIFIER ::= { adsl2Conformance 2 }
+
+   adsl2LineMibCompliance MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+          "The compliance statement for SNMP entities that
+          manage ADSL/ADSL2 or ADSL2+ interfaces."
+      MODULE  -- this module
+      MANDATORY-GROUPS
+          {
+          adsl2LineGroup,
+          adsl2ChannelStatusGroup,
+          adsl2SCStatusGroup,
+          adsl2LineInventoryGroup,
+          adsl2LineConfTemplateGroup,
+          adsl2LineConfProfGroup,
+          adsl2LineConfProfModeSpecGroup,
+          adsl2ChConfProfileGroup,
+          adsl2LineAlarmConfTemplateGroup,
+          adsl2PMLineCurrGroup,
+          adsl2PMLineCurrInitGroup,
+          adsl2PMLineHist15MinGroup,
+          adsl2PMLineHist1DayGroup,
+          adsl2PMLineInitHist15MinGroup,
+          adsl2PMLineInitHist1DayGroup,
+          adsl2PMChCurrGroup,
+          adsl2PMChHist15MinGroup,
+          adsl2PMChHist1DGroup
+          }
+
+   GROUP  adsl2ChannelStatusAtmGroup
+      DESCRIPTION
+        "The group of status objects required when the data path
+
+        is ATM."
+
+   GROUP  adsl2ChannelStatusPtmGroup
+      DESCRIPTION
+        "The group of status objects required when the data path
+        is PTM."
+
+   GROUP  adsl2LineConfProfRaGroup
+      DESCRIPTION
+        "The group of objects required for controlling the rate-
+        adaptive behavior of the line."
+
+   GROUP  adsl2LineConfProfMsgMinGroup
+      DESCRIPTION
+        "The group of objects required for controlling the rate
+        reserved for Overhead traffic."
+
+   GROUP  adsl2LineAlarmConfProfileGroup
+      DESCRIPTION
+        "The group of objects that define the alarm thresholds
+        on line-level PM counters."
+
+   GROUP  adsl2ChAlarmConfProfileGroup
+      DESCRIPTION
+        "The group of objects that define the alarm thresholds
+        on channel-level PM counters."
+
+   GROUP  adsl2ChConfProfileAtmGroup
+      DESCRIPTION
+        "The group of configuration objects required when the data
+        path is ATM."
+
+   GROUP  adsl2ChConfProfileMinResGroup
+      DESCRIPTION
+        "The group of configuration objects required for the
+        reserved data rate."
+
+   GROUP  adsl2PMLineCurrInitShortGroup
+      DESCRIPTION
+        "The group of PM counters for the current interval's
+        short initializations."
+
+   GROUP  adsl2PMLineInitHist15MinShortGroup
+      DESCRIPTION
+        "The group of PM counters for the previous 15-minute
+        interval's short initializations."
+
+   GROUP  adsl2PMLineInitHist1DayShortGroup
+      DESCRIPTION
+        "The group of PM counters for the previous 24-hour
+        interval's short initializations."
+
+   GROUP  adsl2ScalarSCGroup
+      DESCRIPTION
+        "The group of objects that report the available memory
+        resources for DELT processes."
+
+   GROUP  adsl2ThreshNotificationGroup
+      DESCRIPTION
+        "The group of threshold crossing notifications."
+
+   GROUP  adsl2StatusChangeNotificationGroup
+      DESCRIPTION
+        "The group of status change notifications."
+      ::= { adsl2Compliances 1 }
+
+   -- units of conformance
+
+   adsl2LineGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LineCnfgTemplate,
+          adsl2LineAlarmCnfgTemplate,
+          adsl2LineCmndConfPmsf,
+          adsl2LineCmndConfLdsf,
+          adsl2LineCmndConfLdsfFailReason,
+          adsl2LineCmndAutomodeColdStart,
+          adsl2LineStatusAtuTransSys,
+          adsl2LineStatusPwrMngState,
+          adsl2LineStatusInitResult,
+          adsl2LineStatusLastStateDs,
+          adsl2LineStatusLastStateUs,
+          adsl2LineStatusAtur,
+          adsl2LineStatusAtuc,
+          adsl2LineStatusLnAttenDs,
+          adsl2LineStatusLnAttenUs,
+          adsl2LineStatusSigAttenDs,
+          adsl2LineStatusSigAttenUs,
+          adsl2LineStatusSnrMarginDs,
+          adsl2LineStatusSnrMarginUs,
+          adsl2LineStatusAttainableRateDs,
+          adsl2LineStatusAttainableRateUs,
+          adsl2LineStatusActPsdDs,
+          adsl2LineStatusActPsdUs,
+          adsl2LineStatusActAtpDs,
+          adsl2LineStatusActAtpUs
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of configuration, status, and commands objects
+          on the line level."
+      ::= { adsl2Groups 1 }
+
+   adsl2ChannelStatusGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChStatusChannelNum,
+          adsl2ChStatusActDataRate,
+          adsl2ChStatusPrevDataRate,
+          adsl2ChStatusActDelay
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of status objects on the channel level."
+      ::= { adsl2Groups 2 }
+
+   adsl2ChannelStatusAtmGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChStatusAtmStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of status objects on the data path level
+          when it is ATM."
+      ::= { adsl2Groups 3 }
+
+   adsl2ChannelStatusPtmGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChStatusPtmStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of status objects on the data path level
+          when it is PTM."
+      ::= { adsl2Groups 4 }
+
+   adsl2SCStatusGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2SCStatusMtime,
+          adsl2SCStatusSnr,
+          adsl2SCStatusBitsAlloc,
+          adsl2SCStatusGainAlloc,
+          adsl2SCStatusTssi,
+          adsl2SCStatusLinScale,
+          adsl2SCStatusLinReal,
+          adsl2SCStatusLinImg,
+          adsl2SCStatusLogMt,
+          adsl2SCStatusLog,
+          adsl2SCStatusQlnMt,
+          adsl2SCStatusQln,
+          adsl2SCStatusLnAtten,
+          adsl2SCStatusSigAtten,
+          adsl2SCStatusSnrMargin,
+          adsl2SCStatusAttainableRate,
+          adsl2SCStatusActAtp,
+          adsl2SCStatusRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of status objects on the sub-carrier level.
+          They are updated as a result of a DELT process."
+      ::= { adsl2Groups 5 }
+
+   adsl2LineInventoryGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LInvG994VendorId,
+          adsl2LInvSystemVendorId,
+          adsl2LInvVersionNumber,
+          adsl2LInvSerialNumber,
+          adsl2LInvSelfTestResult,
+          adsl2LInvTransmissionCapabilities
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of inventory objects per XTU."
+      ::= { adsl2Groups 6 }
+
+   adsl2LineConfTemplateGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LConfTempLineProfile,
+          adsl2LConfTempChan1ConfProfile,
+          adsl2LConfTempChan1RaRatioDs,
+          adsl2LConfTempChan1RaRatioUs,
+          adsl2LConfTempChan2ConfProfile,
+          adsl2LConfTempChan2RaRatioDs,
+          adsl2LConfTempChan2RaRatioUs,
+          adsl2LConfTempChan3ConfProfile,
+          adsl2LConfTempChan3RaRatioDs,
+          adsl2LConfTempChan3RaRatioUs,
+          adsl2LConfTempChan4ConfProfile,
+          adsl2LConfTempChan4RaRatioDs,
+          adsl2LConfTempChan4RaRatioUs,
+          adsl2LConfTempRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of objects in a line configuration template."
+      ::= { adsl2Groups 7 }
+
+   adsl2LineConfProfGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LConfProfScMaskDs,
+          adsl2LConfProfScMaskUs,
+          adsl2LConfProfRfiBandsDs,
+          adsl2LConfProfRaModeDs,
+          adsl2LConfProfRaModeUs,
+          adsl2LConfProfTargetSnrmDs,
+          adsl2LConfProfTargetSnrmUs,
+          adsl2LConfProfMaxSnrmDs,
+          adsl2LConfProfMaxSnrmUs,
+          adsl2LConfProfMinSnrmDs,
+          adsl2LConfProfMinSnrmUs,
+          adsl2LConfProfAtuTransSysEna,
+          adsl2LConfProfPmMode,
+          adsl2LConfProfL0Time,
+          adsl2LConfProfL2Time,
+          adsl2LConfProfL2Atpr,
+          adsl2LConfProfL2Atprt,
+          adsl2LConfProfRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of objects in a line configuration profile."
+      ::= { adsl2Groups 8 }
+
+   adsl2LineConfProfRaGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LConfProfRaUsNrmDs,
+          adsl2LConfProfRaUsNrmUs,
+          adsl2LConfProfRaUsTimeDs,
+          adsl2LConfProfRaUsTimeUs,
+          adsl2LConfProfRaDsNrmsDs,
+          adsl2LConfProfRaDsNrmsUs,
+          adsl2LConfProfRaDsTimeDs,
+          adsl2LConfProfRaDsTimeUs
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects required for controlling the rate-
+        adaptive behavior of the line."
+      ::= { adsl2Groups 9 }
+
+   adsl2LineConfProfMsgMinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LConfProfMsgMinUs,
+          adsl2LConfProfMsgMinDs
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects required for controlling the rate
+        reserved for Overhead traffic."
+      ::= { adsl2Groups 10 }
+
+   adsl2LineConfProfModeSpecGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LConfProfMaxNomPsdDs,
+          adsl2LConfProfMaxNomPsdUs,
+          adsl2LConfProfMaxNomAtpDs,
+          adsl2LConfProfMaxNomAtpUs,
+          adsl2LConfProfMaxAggRxPwrUs,
+          adsl2LConfProfPsdMaskDs,
+          adsl2LConfProfPsdMaskUs,
+          adsl2LConfProfPsdMaskSelectUs,
+          adsl2LConfProfModeSpecRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of objects in a line configuration profile
+          that have an instance for each operation mode allowed."
+      ::= { adsl2Groups 11 }
+
+   adsl2ChConfProfileGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChConfProfMinDataRateDs,
+          adsl2ChConfProfMinDataRateUs,
+          adsl2ChConfProfMaxDataRateDs,
+          adsl2ChConfProfMaxDataRateUs,
+          adsl2ChConfProfMinDataRateLowPwrDs,
+          adsl2ChConfProfMaxDelayDs,
+          adsl2ChConfProfMaxDelayUs,
+          adsl2ChConfProfMinProtectionDs,
+          adsl2ChConfProfMinProtectionUs,
+          adsl2ChConfProfMaxBerDs,
+          adsl2ChConfProfMaxBerUs,
+          adsl2ChConfProfUsDataRateDs,
+          adsl2ChConfProfDsDataRateDs,
+          adsl2ChConfProfUsDataRateUs,
+          adsl2ChConfProfDsDataRateUs,
+          adsl2ChConfProfRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a channel configuration profile."
+      ::= { adsl2Groups 12 }
+
+   adsl2ChConfProfileAtmGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChConfProfImaEnabled,
+          adsl2ChStatusAtmStatus
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of configuration objects required when the data
+        path is ATM."
+      ::= { adsl2Groups 13 }
+
+   adsl2ChConfProfileMinResGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChConfProfMinResDataRateDs,
+          adsl2ChConfProfMinResDataRateUs
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of configuration objects required for the
+        reserved data rate."
+      ::= { adsl2Groups 14 }
+
+   adsl2LineAlarmConfTemplateGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LAlarmConfTempLineProfile,
+          adsl2LAlarmConfTempChan1ConfProfile,
+          adsl2LAlarmConfTempChan2ConfProfile,
+          adsl2LAlarmConfTempChan3ConfProfile,
+          adsl2LAlarmConfTempChan4ConfProfile,
+          adsl2LAlarmConfTempRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of objects in a line alarm
+           template."
+      ::= { adsl2Groups 15 }
+
+   adsl2LineAlarmConfProfileGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2LineAlarmConfProfileAtucThresh15MinFecs,
+          adsl2LineAlarmConfProfileAtucThresh15MinEs,
+          adsl2LineAlarmConfProfileAtucThresh15MinSes,
+          adsl2LineAlarmConfProfileAtucThresh15MinLoss,
+          adsl2LineAlarmConfProfileAtucThresh15MinUas,
+          adsl2LineAlarmConfProfileAturThresh15MinFecs,
+          adsl2LineAlarmConfProfileAturThresh15MinEs,
+          adsl2LineAlarmConfProfileAturThresh15MinSes,
+          adsl2LineAlarmConfProfileAturThresh15MinLoss,
+          adsl2LineAlarmConfProfileAturThresh15MinUas,
+          adsl2LineAlarmConfProfileThresh15MinFailedFullInt,
+          adsl2LineAlarmConfProfileThresh15MinFailedShrtInt,
+          adsl2LineAlarmConfProfileRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of objects in a line alarm profile."
+      ::= { adsl2Groups 16 }
+
+   adsl2ChAlarmConfProfileGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ChAlarmConfProfileAtucThresh15MinCodingViolations,
+          adsl2ChAlarmConfProfileAtucThresh15MinCorrected,
+          adsl2ChAlarmConfProfileAturThresh15MinCodingViolations,
+          adsl2ChAlarmConfProfileAturThresh15MinCorrected,
+          adsl2ChAlarmConfProfileRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of objects in a channel alarm profile."
+      ::= { adsl2Groups 17 }
+
+   adsl2PMLineCurrGroup OBJECT-GROUP
+      OBJECTS
+
+          {
+          adsl2PMLCurrValidIntervals,
+          adsl2PMLCurrInvalidIntervals,
+          adsl2PMLCurr15MTimeElapsed,
+          adsl2PMLCurr15MFecs,
+          adsl2PMLCurr15MEs,
+          adsl2PMLCurr15MSes,
+          adsl2PMLCurr15MLoss,
+          adsl2PMLCurr15MUas,
+          adsl2PMLCurr1DayValidIntervals,
+          adsl2PMLCurr1DayInvalidIntervals,
+          adsl2PMLCurr1DayTimeElapsed,
+          adsl2PMLCurr1DayFecs,
+          adsl2PMLCurr1DayEs,
+          adsl2PMLCurr1DaySes,
+          adsl2PMLCurr1DayLoss,
+          adsl2PMLCurr1DayUas
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the line-level
+        counters for current PM intervals."
+      ::= { adsl2Groups 18 }
+
+   adsl2PMLineCurrInitGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLCurrInit15MTimeElapsed,
+          adsl2PMLCurrInit15MFullInits,
+          adsl2PMLCurrInit15MFailedFullInits,
+          adsl2PMLCurrInit1DayTimeElapsed,
+          adsl2PMLCurrInit1DayFullInits,
+          adsl2PMLCurrInit1DayFailedFullInits
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the full
+        initialization counters for current PM intervals."
+      ::= { adsl2Groups 19 }
+
+   adsl2PMLineCurrInitShortGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLCurrInit15MShortInits,
+          adsl2PMLCurrInit15MFailedShortInits,
+          adsl2PMLCurrInit1DayShortInits,
+          adsl2PMLCurrInit1DayFailedShortInits
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the short
+        initialization counters for current PM intervals."
+      ::= { adsl2Groups 20 }
+
+   adsl2PMLineHist15MinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLHist15MMonitoredTime,
+          adsl2PMLHist15MFecs,
+          adsl2PMLHist15MEs,
+          adsl2PMLHist15MSes,
+          adsl2PMLHist15MLoss,
+          adsl2PMLHist15MUas,
+          adsl2PMLHist15MValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of line-level PM counters for the previous
+        15-minute interval."
+      ::= { adsl2Groups 21 }
+
+   adsl2PMLineHist1DayGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLHist1DMonitoredTime,
+          adsl2PMLHist1DFecs,
+          adsl2PMLHist1DEs,
+          adsl2PMLHist1DSes,
+          adsl2PMLHist1DLoss,
+          adsl2PMLHist1DUas,
+          adsl2PMLHist1DValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of line-level PM counters for the previous
+        24-hour interval."
+      ::= { adsl2Groups 22 }
+
+   adsl2PMLineInitHist15MinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLHistInit15MMonitoredTime,
+          adsl2PMLHistInit15MFullInits,
+          adsl2PMLHistInit15MFailedFullInits,
+          adsl2PMLHistInit15MValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of PM counters for the previous 15-minute
+        interval's full initializations."
+      ::= { adsl2Groups 23 }
+
+   adsl2PMLineInitHist15MinShortGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLHistInit15MShortInits,
+          adsl2PMLHistInit15MFailedShortInits
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of PM counters for the previous 15-minute
+        interval's short initializations."
+      ::= { adsl2Groups 24 }
+
+   adsl2PMLineInitHist1DayGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLHistinit1DMonitoredTime,
+          adsl2PMLHistinit1DFullInits,
+          adsl2PMLHistinit1DFailedFullInits,
+          adsl2PMLHistinit1DValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of PM counters for the previous 24-hour
+        interval's full initializations."
+      ::= { adsl2Groups 25 }
+
+   adsl2PMLineInitHist1DayShortGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMLHistinit1DShortInits,
+          adsl2PMLHistinit1DFailedShortInits
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of PM counters for the previous 24-hour
+        interval's short initializations."
+      ::= { adsl2Groups 26 }
+
+   adsl2PMChCurrGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMChCurrValidIntervals,
+          adsl2PMChCurrInvalidIntervals,
+          adsl2PMChCurr15MTimeElapsed,
+          adsl2PMChCurr15MCodingViolations,
+          adsl2PMChCurr15MCorrectedBlocks,
+          adsl2PMChCurr1DayValidIntervals,
+          adsl2PMChCurr1DayInvalidIntervals,
+          adsl2PMChCurr1DayTimeElapsed,
+          adsl2PMChCurr1DayCodingViolations,
+          adsl2PMChCurr1DayCorrectedBlocks
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the channel-level
+        counters for current PM intervals."
+      ::= { adsl2Groups 27 }
+
+   adsl2PMChHist15MinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMChHist15MMonitoredTime,
+          adsl2PMChHist15MCodingViolations,
+          adsl2PMChHist15MCorrectedBlocks,
+          adsl2PMChHist15MValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the channel-level
+        counters for previous 15-minute PM intervals."
+      ::= { adsl2Groups 28 }
+
+   adsl2PMChHist1DGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2PMChHist1DMonitoredTime,
+          adsl2PMChHist1DCodingViolations,
+          adsl2PMChHist1DCorrectedBlocks,
+          adsl2PMChHist1DValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the channel-level
+        counters for previous 24-hour PM intervals."
+      ::= { adsl2Groups 29 }
+
+   adsl2ScalarSCGroup OBJECT-GROUP
+      OBJECTS
+          {
+          adsl2ScalarSCMaxInterfaces,
+          adsl2ScalarSCAvailInterfaces
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the available memory
+        resources for DELT processes."
+      ::= { adsl2Groups 30 }
+
+   adsl2ThreshNotificationGroup NOTIFICATION-GROUP
+      NOTIFICATIONS
+      {
+      adsl2LinePerfFECSThreshAtuc,
+      adsl2LinePerfFECSThreshAtur,
+      adsl2LinePerfESThreshAtuc,
+      adsl2LinePerfESThreshAtur,
+      adsl2LinePerfSESThreshAtuc,
+      adsl2LinePerfSESThreshAtur,
+      adsl2LinePerfLOSSThreshAtuc,
+      adsl2LinePerfLOSSThreshAtur,
+      adsl2LinePerfUASThreshAtuc,
+      adsl2LinePerfUASThreshAtur,
+      adsl2LinePerfCodingViolationsThreshAtuc,
+      adsl2LinePerfCodingViolationsThreshAtur,
+      adsl2LinePerfCorrectedThreshAtuc,
+      adsl2LinePerfCorrectedThreshAtur,
+      adsl2LinePerfFailedFullInitThresh,
+      adsl2LinePerfFailedShortInitThresh
+      }
+      STATUS      current
+      DESCRIPTION
+        "This group supports notifications of significant conditions
+        associated with ADSL/ADSL2/ADSL2+ lines."
+      ::= { adsl2Groups 31 }
+
+   adsl2StatusChangeNotificationGroup NOTIFICATION-GROUP
+      NOTIFICATIONS
+      {
+      adsl2LineStatusChangeAtuc,
+      adsl2LineStatusChangeAtur
+      }
+      STATUS      current
+      DESCRIPTION
+        "This group supports notifications of threshold crossing
+        associated with ADSL/ADSL2/ADSL2+ lines."
+      ::= { adsl2Groups 32 }
+
+END
diff --git a/snmp_builder/mibs/ADSL2-LINE-TC-MIB.mib b/snmp_builder/mibs/ADSL2-LINE-TC-MIB.mib
new file mode 100644
index 0000000..9de8ca1
--- /dev/null
+++ b/snmp_builder/mibs/ADSL2-LINE-TC-MIB.mib
@@ -0,0 +1,729 @@
+ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY,
+   transmission
+      FROM SNMPv2-SMI
+
+   TEXTUAL-CONVENTION
+      FROM SNMPv2-TC;
+
+adsl2TCMIB MODULE-IDENTITY
+   LAST-UPDATED "200610040000Z" -- October 4th, 2006
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+   Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+             Chair:     Mike Sneed
+                        Sand Channel Systems
+             Postal:    P.O. Box 37324
+                        Raleigh NC 27627-732
+             Email:     sneedmike@hotmail.com
+             Phone:     +1 206 600 7022
+
+             Co-Chair & Co-editor:
+                        Menachem Dodge
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     mbdodge@ieee.org
+             Phone:     +972 3 926 8421
+
+             Co-editor: Moti Morgenstern
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     moti.morgenstern@ecitele.com
+             Phone:     +972 3 926 6258
+
+             Co-editor: Scott Baillie
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     scott.baillie@nec.com.au
+             Phone:     +61 3 9264 3986
+
+             Co-editor: Umberto Bonollo
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     umberto.bonollo@nec.com.au
+             Phone:     +61 3 9264 3385
+            "
+   DESCRIPTION
+        "This MIB Module provides Textual Conventions to be
+         used by the ADSL2-LINE-MIB module for the purpose of
+         managing ADSL, ADSL2, and ADSL2+ lines.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4706: see the RFC itself for
+        full legal notices."
+
+   REVISION "200610040000Z" -- October 4th, 2006
+   DESCRIPTION "Initial version, published as RFC 4706."
+      ::= { transmission 238 2 } -- adsl2MIB 2
+
+------------------------------------------------
+--          Textual Conventions               --
+------------------------------------------------
+
+Adsl2Unit ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Identifies a transceiver as being either an ATU-C or
+       an ATU-R.  An ADSL line consists of two transceivers, an ATU-C
+       and an ATU-R.  Attributes with this syntax reference the two
+       sides of a line.  Specified as an INTEGER, the two values
+
+       are:
+
+        atuc(1)  -- Central office ADSL terminal unit (ATU-C).
+        atur(2)  -- Remote ADSL terminal unit (ATU-R)."
+   SYNTAX      INTEGER {
+                  atuc(1),
+                  atur(2)
+               }
+
+Adsl2Direction ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "Identifies the direction of a band as being
+         either upstream or downstream.  Specified as an INTEGER,
+         the two values are:
+          upstream(1), and
+          downstream(2)."
+     SYNTAX INTEGER {
+       upstream(1),
+       downstream(2)
+    }
+
+Adsl2TransmissionModeType ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "A set of ADSL2 line transmission modes, with one bit
+       per mode.  The notes (F) and (L) denote Full-Rate
+       and Lite/splitterless, respectively:
+          Bit 00 : Regional Std. (ANSI T1.413) (F)
+          Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
+          Bit 02 : G.992.1 POTS non-overlapped (F)
+          Bit 03 : G.992.1 POTS overlapped (F)
+          Bit 04 : G.992.1 ISDN non-overlapped (F)
+          Bit 05 : G.992.1 ISDN overlapped (F)
+          Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
+          Bit 07 : G.992.1 TCM-ISDN overlapped (F)
+          Bit 08 : G.992.2 POTS non-overlapped (L)
+          Bit 09 : G.992.2 POTS overlapped (L)
+          Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
+          Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
+          Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1
+          Bit 13-17: Reserved
+          Bit 18 : G.992.3 POTS non-overlapped (F)
+          Bit 19 : G.992.3 POTS overlapped (F)
+          Bit 20 : G.992.3 ISDN non-overlapped (F)
+          Bit 21 : G.992.3 ISDN overlapped (F)
+
+          Bit 22-23: Reserved
+          Bit 24 : G.992.4 POTS non-overlapped (L)
+          Bit 25 : G.992.4 POTS overlapped (L)
+          Bit 26-27: Reserved
+          Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
+          Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
+          Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
+          Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
+          Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
+          Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
+          Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
+                                   wide U/S (F)
+          Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
+                                   narrow U/S(F)
+          Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
+                                   wide U/S (F)
+          Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
+                                   narrow U/S (F)
+          Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
+          Bit 39 : G.992.3 Annex M POTS overlapped (F)
+          Bit 40 : G.992.5 POTS non-overlapped (F)
+          Bit 41 : G.992.5 POTS overlapped (F)
+          Bit 42 : G.992.5 ISDN non-overlapped (F)
+          Bit 43 : G.992.5 ISDN overlapped (F)
+          Bit 44-45: Reserved
+          Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
+          Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
+          Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
+          Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
+          Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
+          Bit 51 : G.992.5 Annex M POTS overlapped (F)
+          Bit 52-55: Reserved"
+   SYNTAX      BITS {
+                  ansit1413(0),
+                  etsi(1),
+                  g9921PotsNonOverlapped(2),
+                  g9921PotsOverlapped(3),
+                  g9921IsdnNonOverlapped(4),
+                  g9921isdnOverlapped(5),
+                  g9921tcmIsdnNonOverlapped(6),
+                  g9921tcmIsdnOverlapped(7),
+                  g9922potsNonOverlapped(8),
+                  g9922potsOverlapped(9),
+                  g9922tcmIsdnNonOverlapped(10),
+                  g9922tcmIsdnOverlapped(11),
+                  g9921tcmIsdnSymmetric(12),
+                  reserved1(13),
+                  reserved2(14),
+                  reserved3(15),
+                  reserved4(16),
+                  reserved5(17),
+                  g9923PotsNonOverlapped(18),
+                  g9923PotsOverlapped(19),
+                  g9923IsdnNonOverlapped(20),
+                  g9923isdnOverlapped(21),
+                  reserved6(22),
+                  reserved7(23),
+                  g9924potsNonOverlapped(24),
+                  g9924potsOverlapped(25),
+                  reserved8(26),
+                  reserved9(27),
+                  g9923AnnexIAllDigNonOverlapped(28),
+                  g9923AnnexIAllDigOverlapped(29),
+                  g9923AnnexJAllDigNonOverlapped(30),
+                  g9923AnnexJAllDigOverlapped(31),
+                  g9924AnnexIAllDigNonOverlapped(32),
+                  g9924AnnexIAllDigOverlapped(33),
+                  g9923AnnexLMode1NonOverlapped(34),
+                  g9923AnnexLMode2NonOverlapped(35),
+                  g9923AnnexLMode3Overlapped(36),
+                  g9923AnnexLMode4Overlapped(37),
+                  g9923AnnexMPotsNonOverlapped(38),
+                  g9923AnnexMPotsOverlapped(39),
+                  g9925PotsNonOverlapped(40),
+                  g9925PotsOverlapped(41),
+                  g9925IsdnNonOverlapped(42),
+                  g9925isdnOverlapped(43),
+                  reserved10(44),
+                  reserved11(45),
+                  g9925AnnexIAllDigNonOverlapped(46),
+                  g9925AnnexIAllDigOverlapped(47),
+                  g9925AnnexJAllDigNonOverlapped(48),
+                  g9925AnnexJAllDigOverlapped(49),
+                  g9925AnnexMPotsNonOverlapped(50),
+                  g9925AnnexMPotsOverlapped(51),
+                  reserved12(52),
+                  reserved13(53),
+                  reserved14(54),
+                  reserved15(55)
+               }
+
+Adsl2RaMode ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Specifies the rate adaptation behavior for the line.
+       The three possible behaviors are:
+
+        manual(1)    - No Rate-Adaptation.  The initialization
+                       process attempts to synchronize to a
+                       specified rate.
+        raInit(2)    - Rate-Adaptation during initialization process
+                       only, which attempts to synchronize to a rate
+                       between minimum and maximum specified values.
+        dynamicRa(3) - Dynamic Rate-Adaptation during initialization
+                       process as well as during SHOWTIME."
+   SYNTAX      INTEGER {
+                  manual(1),
+                  raInit(2),
+                  dynamicRa(3)
+               }
+
+Adsl2InitResult ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Specifies the result of a full initialization attempt; the
+       six possible result values are:
+        noFail(0)            - Successful initialization.
+        configError(1)       - Configuration failure.
+        configNotFeasible(2) - Configuration details not supported.
+        commFail(3)          - Communication failure.
+        noPeerAtu(4)         - Peer ATU not detected.
+        otherCause(5)        - Other initialization failure reason.
+
+       The values used are as defined in ITU-T G.997.1,
+       paragraph 7.5.1.3"
+   SYNTAX      INTEGER {
+                  noFail(0),
+                  configError(1),
+                  configNotFeasible(2),
+                  commFail(3),
+                  noPeerAtu(4),
+                  otherCause(5)
+               }
+
+Adsl2OperationModes ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "The ADSL2 management model specified includes an ADSL Mode
+       attribute that identifies an instance of ADSL Mode-Specific
+       PSD Configuration object in the ADSL Line Profile.  The
+       following classes of ADSL operating mode are defined.
+       The notes (F) and (L) denote Full-Rate and Lite/splitterless
+       respectively:
+
+       +-------+--------------------------------------------------+
+       | Value |         ADSL operation mode description          |
+       +-------+--------------------------------------------------+
+
+           1   - The default/generic PSD configuration.  Default
+                 configuration will be used when no other matching
+                 mode-specific configuration can be found.
+           2   - ADSL family.  The attributes included in the Mode-
+                 Specific PSD Configuration are irrelevant for
+                 ITU-T G.992.1 and G.992.2 ADSL modes.  Hence, it
+                 is possible to map those modes to this generic
+                 class.
+          3-7  - Unused. Reserved for future ITU-T specification.
+           8   - G.992.3 POTS non-overlapped (F)
+           9   - G.992.3 POTS overlapped (F)
+          10   - G.992.3 ISDN non-overlapped (F)
+          11   - G.992.3 ISDN overlapped (F)
+        12-13  - Unused. Reserved for future ITU-T specification.
+          14   - G.992.4 POTS non-overlapped (L)
+          15   - G.992.4 POTS overlapped (L)
+        16-17  - Unused. Reserved for future ITU-T specification.
+          18   - G.992.3 Annex I All-Digital non-overlapped (F)
+          19   - G.992.3 Annex I All-Digital overlapped (F)
+          20   - G.992.3 Annex J All-Digital non-overlapped (F)
+          21   - G.992.3 Annex J All-Digital overlapped (F)
+          22   - G.992.4 Annex I All-Digital non-overlapped (L)
+          23   - G.992.4 Annex I All-Digital overlapped (L)
+          24   - G.992.3 Annex L POTS non-overlapped, mode 1,
+                 wide U/S (F)
+          25   - G.992.3 Annex L POTS non-overlapped, mode 2,
+                 narrow U/S(F)
+          26   - G.992.3 Annex L POTS overlapped, mode 3,
+                 wide U/S (F)
+          27   - G.992.3 Annex L POTS overlapped, mode 4,
+                 narrow U/S (F)
+          28   - G.992.3 Annex M POTS non-overlapped (F)
+          29   - G.992.3 Annex M POTS overlapped (F)
+          30   - G.992.5 POTS non-overlapped (F)
+          31   - G.992.5 POTS overlapped (F)
+          32   - G.992.5 ISDN non-overlapped (F)
+          33   - G.992.5 ISDN overlapped (F)
+        34-35  - Unused. Reserved for future ITU-T specification.
+          36   - G.992.5 Annex I All-Digital non-overlapped (F)
+          37   - G.992.5 Annex I All-Digital overlapped (F)
+          38   - G.992.5 Annex J All-Digital non-overlapped (F)
+          39   - G.992.5 Annex J All-Digital overlapped (F)
+          40   - G.992.5 Annex M POTS non-overlapped (F)
+          41   - G.992.5 Annex M POTS overlapped (F)
+      "
+   SYNTAX      INTEGER {
+                  defMode (1),
+                  adsl(2),
+                  g9923PotsNonOverlapped(8),
+                  g9923PotsOverlapped(9),
+                  g9923IsdnNonOverlapped(10),
+                  g9923isdnOverlapped(11),
+                  g9924potsNonOverlapped(14),
+                  g9924potsOverlapped(15),
+                  g9923AnnexIAllDigNonOverlapped(18),
+                  g9923AnnexIAllDigOverlapped(19),
+                  g9923AnnexJAllDigNonOverlapped(20),
+                  g9923AnnexJAllDigOverlapped(21),
+                  g9924AnnexIAllDigNonOverlapped(22),
+                  g9924AnnexIAllDigOverlapped(23),
+                  g9923AnnexLMode1NonOverlapped(24),
+                  g9923AnnexLMode2NonOverlapped(25),
+                  g9923AnnexLMode3Overlapped(26),
+                  g9923AnnexLMode4Overlapped(27),
+                  g9923AnnexMPotsNonOverlapped(28),
+                  g9923AnnexMPotsOverlapped(29),
+                  g9925PotsNonOverlapped(30),
+                  g9925PotsOverlapped(31),
+                  g9925IsdnNonOverlapped(32),
+                  g9925isdnOverlapped(33),
+                  g9925AnnexIAllDigNonOverlapped(36),
+                  g9925AnnexIAllDigOverlapped(37),
+                  g9925AnnexJAllDigNonOverlapped(38),
+                  g9925AnnexJAllDigOverlapped(39),
+                  g9925AnnexMPotsNonOverlapped(40),
+                  g9925AnnexMPotsOverlapped(41)
+               }
+
+Adsl2PowerMngState ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Attributes with this syntax uniquely identify each power
+       management state defined for the ADSL/ADSL2 or ADSL2+ link.
+       The possible values are:
+         l0(1) - L0 - Full power management state.
+         l1(2) - L1 - Low power management state (for G.992.2).
+         l2(3) - L2 - Low power management state (for G.992.3,
+                      G.992.4, and G.992.5).
+         l3(4) - L3 - Idle power management state."
+   SYNTAX      INTEGER {
+
+                  l0(1),
+                  l1(2),
+                  l2(3),
+                  l3(4)
+               }
+
+Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Attributes with this syntax are configuration parameters
+       that reference the desired power management state for the
+       ADSL/ADSL2 or ADSL2+ link:
+         l3toL0(0)          - Perform a transition from L3 to L0
+                              (Full power management state).
+         l0toL2(2)          - Perform a transition from L0 to L2
+                              (Low power management state).
+         l0orL2toL3(3)      - Perform a transition into L3 (Idle
+                              power management state).
+
+       The values used are as defined in ITU-T G.997.1,
+       paragraph 7.3.1.1.3"
+   SYNTAX      INTEGER {
+                  l3toL0(0),
+                  l0toL2(2),
+                  l0orL2toL3(3)
+               }
+
+Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Attributes with this syntax are configuration parameters
+       that reference the power modes/states into which the ATU-C or
+       ATU-R may autonomously transit.
+
+       It is a BITS structure that allows control of the following
+       transit options:
+        allowTransitionsToIdle(0)     - XTU may autonomously transit
+                                        to idle (L3) state.
+        allowTransitionsToLowPower(1) - XTU may autonomously transit
+                                        to low-power (L2) state."
+   SYNTAX BITS {
+       allowTransitionsToIdle(0),
+       allowTransitionsToLowPower(1)
+     }
+
+Adsl2LineLdsf ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Attributes with this syntax are configuration parameters
+       that control the Loop Diagnostic mode for the ADSL/ADSL2 or
+       ADSL2+ link.  The possible values are:
+         inhibit(0)  - Inhibit Loop Diagnostic mode.
+         force(1)    - Force/Initiate Loop Diagnostic mode.
+
+       The values used are as defined in ITU-T G.997.1,
+       paragraph 7.3.1.1.8"
+   SYNTAX INTEGER {
+       inhibit(0),
+       force(1)
+     }
+
+Adsl2LdsfResult ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "Possible failure reasons associated with performing
+         a Dual Ended Loop Test (DELT) on a DSL line.
+         Possible values are:
+          none(1)         - The default value in case LDSF was never
+                            requested for the associated line.
+          success(2)      - The recent command completed
+                            successfully.
+          inProgress(3)   - The Loop Diagnostics process is in
+                            progress.
+          unsupported(4)  - The NE or the line card doesn't support
+                            LDSF.
+          cannotRun(5)    - The NE cannot initiate the command, due
+                            to a nonspecific reason.
+          aborted(6)      - The Loop Diagnostics process aborted.
+          failed(7)       - The Loop Diagnostics process failed.
+          illegalMode(8)  - The NE cannot initiate the command, due
+                            to the specific mode of the relevant
+                            line.
+          adminUp(9)      - The NE cannot initiate the command, as
+                            the relevant line is administratively
+                            'Up'.
+          tableFull(10)   - The NE cannot initiate the command, due
+                            to reaching the maximum number of rows
+                            in the results table.
+          noResources(11) - The NE cannot initiate the command, due
+                            to lack of internal memory resources."
+     SYNTAX INTEGER {
+          none(1),
+          success(2),
+          inProgress(3),
+          unsupported(4),
+          cannotRun(5),
+          aborted(6),
+          failed(7),
+          illegalMode(8),
+          adminUp(9),
+          tableFull(10),
+          noResources(11)
+     }
+
+Adsl2SymbolProtection ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Attributes with this syntax are configuration parameters
+       that reference the minimum-length impulse noise protection
+       (INP) in terms of number of symbols.  The possible values are:
+       noProtection (i.e., INP not required), halfSymbol (i.e., INP
+       length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol."
+   SYNTAX      INTEGER {
+               noProtection(1),
+               halfSymbol(2),
+               singleSymbol(3),
+               twoSymbols(4),
+               threeSymbols(5),
+               fourSymbols(6),
+               fiveSymbols(7),
+               sixSymbols(8),
+               sevenSymbols(9),
+               eightSymbols(10),
+               nineSymbols(11),
+               tenSymbols(12),
+               elevenSymbols(13),
+               twelveSymbols(14),
+               thirteeSymbols(15),
+               fourteenSymbols(16),
+               fifteenSymbols(17),
+               sixteenSymbols(18)
+             }
+Adsl2MaxBer ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Attributes with this syntax are configuration parameters
+       that reference the maximum Bit Error Rate (BER).
+       The possible values are:
+
+         eminus3(1)   - Maximum BER=E^-3
+
+         eminus5(2)   - Maximum BER=E^-5
+         eminus7(3)   - Maximum BER=E^-7"
+   SYNTAX      INTEGER {
+                  eminus3(1),
+                  eminus5(2),
+                  eminus7(3)
+               }
+
+Adsl2ScMaskDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Each one of the 512 bits in this OCTET
+       STRING array represents the corresponding bin
+       in the downstream direction.  A value of one
+       indicates that the bin is not in use."
+   SYNTAX      OCTET STRING (SIZE(0..64))
+
+Adsl2ScMaskUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Each one of the 64 bits in this OCTET
+      STRING array represents the corresponding bin
+      in the upstream direction.  A value of one
+      indicates that the bin is not in use."
+   SYNTAX      OCTET STRING (SIZE(0..8))
+
+Adsl2RfiDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Each one of the 512 bits in this OCTET
+      STRING array represents the corresponding bin
+      in the downstream direction.  A value of one
+      indicates that the bin is part of a notch
+      filter."
+   SYNTAX      OCTET STRING (SIZE(0..64))
+
+Adsl2PsdMaskDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to
+      32 PSD Mask breakpoints.
+      Each breakpoint occupies 3 octets: The first
+      two octets hold the index of the sub-carrier
+      associated with the breakpoint.  The third octet
+      holds the PSD reduction at the breakpoint from 0
+      (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
+      0.5 dBm/Hz."
+   SYNTAX      OCTET STRING (SIZE(0..96))
+
+Adsl2PsdMaskUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to
+      4 PSD Mask breakpoints.
+      Each breakpoint occupies 3 octets: The first
+      two octets hold the index of the sub-carrier
+      associated with the breakpoint.  The third octet
+      holds the PSD reduction at the breakpoint from 0
+      (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
+      0.5 dBm/Hz."
+   SYNTAX      OCTET STRING (SIZE(0..12))
+
+Adsl2Tssi ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to
+      32 transmit spectrum shaping (TSSi) breakpoints.
+      Each breakpoint occupies 3 octets: The first
+      two octets hold the index of the sub-carrier
+      associated with the breakpoint.  The third octet
+      holds the shaping parameter at the breakpoint.  It
+      is a value from 0 to 127 (units of -0.5 dB).  The
+      special value 127 indicates that the sub-carrier
+      is not transmitted."
+   SYNTAX      OCTET STRING (SIZE(0..96))
+
+Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "This parameter represents the last successfully
+         transmitted initialization state in the last full
+         initialization performed on the line.  States are
+         per the specific xDSL technology and are numbered
+         from 0 (if G.994.1 is used) or 1 (if G.994.1 is
+         not used) up to Showtime."
+     SYNTAX      INTEGER {
+       atucG9941(0),
+       atucQuiet1(1),
+       atucComb1(2),
+       atucQuiet2(3),
+       atucComb2(4),
+       atucIcomb1(5),
+       atucLineprob(6),
+       atucQuiet3(7),
+       atucComb3(8),
+       atucIComb2(9),
+       atucMsgfmt(10),
+       atucMsgpcb(11),
+       atucQuiet4(12),
+       atucReverb1(13),
+       atucTref1(14),
+       atucReverb2(15),
+       atucEct(16),
+       atucReverb3(17),
+       atucTref2(18),
+       atucReverb4(19),
+       atucSegue1(20),
+       atucMsg1(21),
+       atucReverb5(22),
+       atucSegue2(23),
+       atucMedley(24),
+       atucExchmarker(25),
+       atucMsg2(26),
+       atucReverb6(27),
+       atucSegue3(28),
+       atucParams(29),
+       atucReverb7(30),
+       atucSegue4(31),
+       atucShowtime(32),
+       --
+       aturG9941(100),
+       aturQuiet1(101),
+       aturComb1(102),
+       aturQuiet2(103),
+       aturComb2(104),
+       aturIcomb1(105),
+       aturLineprob(106),
+       aturQuiet3(107),
+       aturComb3(108),
+       aturIcomb2(109),
+       aturMsgfmt(110),
+       aturMsgpcb(111),
+       aturReverb1(112),
+       aturQuiet4(113),
+       aturReverb2(114),
+       aturQuiet5(115),
+       aturReverb3(116),
+       aturEct(117),
+       aturReverb4(118),
+       aturSegue1(119),
+       aturReverb5(120),
+       aturSegue2(121),
+       aturMsg1(122),
+       aturMedley(123),
+       aturExchmarker(124),
+       aturMsg2(125),
+       aturReverb6(126),
+       aturSegue3(127),
+       aturParams(128),
+       aturReverb7(129),
+       aturSegue4(130),
+       aturShowtime(131)
+     }
+
+Adsl2LineStatus ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Attributes with this syntax are status parameters
+       that reflect the failure status for a given endpoint of
+       ADSL/ADSL2 or ADSL2+ link.
+
+       This BITS structure can report the following failures:
+
+        noDefect(0)       - This bit position positively reports
+                            that no defect or failure exists.
+        lossOfFrame(1)    - Loss of frame synchronization.
+        lossOfSignal(2)   - Loss of signal.
+        lossOfPower(3)    - Loss of power.  Usually this failure may
+                            be reported for ATU-Rs only.
+        initFailure(4)    - Recent initialization process failed.
+                            Never active on ATU-R."
+   SYNTAX BITS {
+       noDefect(0),
+       lossOfFrame(1),
+       lossOfSignal(2),
+       lossOfPower(3),
+       initFailure(4)
+     }
+
+Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "Attributes with this syntax are status parameters that
+      reflect the failure status for Transmission Convergence (TC)
+      layer of a given ATM interface (data path over an ADSL/ADSL2
+      or ADSL2+ link).
+
+      This BITS structure can report the following failures:
+       noDefect(0)              - This bit position positively
+                                  reports that no defect or failure
+                                  exists.
+       noCellDelineation(1)     - The link was successfully
+
+                                  initialized, but cell delineation
+                                  was never acquired on the
+                                  associated ATM data path.
+       lossOfCellDelineation(2) - Loss of cell delineation on the
+                                  associated ATM data path."
+   SYNTAX BITS {
+       noDefect(0),
+       noCellDelineation(1),
+       lossOfCellDelineation(2)
+     }
+
+Adsl2ChPtmStatus ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "Attributes with this syntax are status parameters that
+      reflect the failure status for a given PTM interface (packet
+      data path over an ADSL/ADSL2 or ADSL2+ link).
+
+      This BITS structure can report the following failures:
+          noDefect(0)     - This bit position positively
+                            reports that no defect or failure exists.
+          outOfSync(1)    - Out of synchronization."
+      SYNTAX BITS {
+          noDefect(0),
+          outOfSync(1)
+     }
+
+END
diff --git a/snmp_builder/mibs/AGENTX-MIB.mib b/snmp_builder/mibs/AGENTX-MIB.mib
new file mode 100644
index 0000000..f9e5acd
--- /dev/null
+++ b/snmp_builder/mibs/AGENTX-MIB.mib
@@ -0,0 +1,527 @@
+AGENTX-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, mib-2
+    FROM SNMPv2-SMI
+ SnmpAdminString
+    FROM SNMP-FRAMEWORK-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+    FROM SNMPv2-CONF
+ TEXTUAL-CONVENTION, TimeStamp, TruthValue, TDomain
+    FROM SNMPv2-TC;
+agentxMIB MODULE-IDENTITY
+ LAST-UPDATED "200001100000Z" -- Midnight 10 January 2000
+ ORGANIZATION "AgentX Working Group"
+ CONTACT-INFO "WG-email:   agentx@dorothy.bmc.com
+               Subscribe:  agentx-request@dorothy.bmc.com
+               WG-email Archive:  ftp://ftp.peer.com/pub/agentx/archives
+               FTP repository:  ftp://ftp.peer.com/pub/agentx
+               http://www.ietf.org/html.charters/agentx-charter.html
+
+               Chair:      Bob Natale
+                           ACE*COMM Corporation
+               Email:      bnatale@acecomm.com
+
+               WG editor:  Mark Ellison
+                           Ellison Software Consulting, Inc.
+               Email:      ellison@world.std.com
+
+               Co-author:  Lauren Heintz
+                           Cisco Systems,
+               EMail:      lheintz@cisco.com
+
+               Co-author:  Smitha Gudur
+                           Independent Consultant
+               Email:      sgudur@hotmail.com
+              "
+ DESCRIPTION    "This is the MIB module for the SNMP Agent Extensibility
+     Protocol (AgentX).  This MIB module will be implemented by
+     the master agent.
+    "
+
+  REVISION     "200001100000Z" -- Midnight 10 January 2000
+ DESCRIPTION
+    "Initial version published as RFC 2742."
+  ::= { mib-2  74 }
+
+ -- Textual Conventions
+
+ AgentxTAddress ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+     "Denotes a transport service address.  This is identical to
+      the TAddress textual convention (SNMPv2-SMI) except that
+      zero-length values are permitted.
+     "
+   SYNTAX       OCTET STRING (SIZE (0..255))
+
+ -- Administrative assignments
+
+ agentxObjects OBJECT IDENTIFIER      ::= { agentxMIB 1 }
+ agentxGeneral OBJECT IDENTIFIER      ::= { agentxObjects 1 }
+ agentxConnection OBJECT IDENTIFIER   ::= { agentxObjects 2 }
+ agentxSession OBJECT IDENTIFIER      ::= { agentxObjects 3 }
+ agentxRegistration OBJECT IDENTIFIER ::= { agentxObjects 4 }
+
+ agentxDefaultTimeout OBJECT-TYPE
+  SYNTAX      INTEGER (0..255)
+  UNITS       "seconds"
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The default length of time, in seconds, that the master
+      agent should allow to elapse after dispatching a message
+      to a session before it regards the subagent as not
+      responding.  This is a system-wide value that may
+      override the timeout value associated with a particular
+      session (agentxSessionTimeout) or a particular registered
+      MIB region (agentxRegTimeout).  If the associated value of
+      agentxSessionTimeout and agentxRegTimeout are zero, or
+      impractical in accordance with implementation-specific
+      procedure of the master agent, the value represented by
+      this object will be the effective timeout value for the
+
+      master agent to await a response to a dispatch from a
+      given subagent.
+     "
+  DEFVAL      { 5 }
+  ::= { agentxGeneral 1 }
+
+ agentxMasterAgentXVer OBJECT-TYPE
+  SYNTAX      INTEGER (1..255)
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The AgentX protocol version supported by this master agent.
+      The current protocol version is 1.  Note that the master agent
+      must also allow interaction with earlier version subagents.
+     "
+  ::= { agentxGeneral 2 }
+
+ --      The AgentX Subagent Connection Group
+
+ agentxConnTableLastChange OBJECT-TYPE
+  SYNTAX      TimeStamp
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The value of sysUpTime when the last row creation or deletion
+      occurred in the agentxConnectionTable.
+     "
+  ::= { agentxConnection 1 }
+
+ agentxConnectionTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF AgentxConnectionEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "The agentxConnectionTable tracks all current AgentX transport
+      connections.  There may be zero, one, or more AgentX sessions
+      carried on a given AgentX connection.
+     "
+   ::= { agentxConnection 2 }
+
+ agentxConnectionEntry OBJECT-TYPE
+   SYNTAX      AgentxConnectionEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An agentxConnectionEntry contains information describing a
+      single AgentX transport connection.  A connection may be
+
+      used to support zero or more AgentX sessions.  An entry is
+      created when a new transport connection is established,
+      and is destroyed when the transport connection is terminated.
+     "
+   INDEX { agentxConnIndex }
+   ::= { agentxConnectionTable 1 }
+
+ AgentxConnectionEntry ::= SEQUENCE {
+          agentxConnIndex            Unsigned32,
+          agentxConnOpenTime         TimeStamp,
+          agentxConnTransportDomain  TDomain,
+          agentxConnTransportAddress AgentxTAddress }
+
+ agentxConnIndex OBJECT-TYPE
+   SYNTAX       Unsigned32 (1..4294967295)
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+     "agentxConnIndex contains the value that uniquely identifies
+      an open transport connection used by this master agent
+      to provide AgentX service.  Values of this index should
+      not be re-used.  The value assigned to a given transport
+      connection is constant for the lifetime of that connection.
+     "
+   ::= { agentxConnectionEntry 1 }
+
+ agentxConnOpenTime OBJECT-TYPE
+   SYNTAX       TimeStamp
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "The value of sysUpTime when this connection was established
+      and, therefore, its value when this entry was added to the table.
+     "
+   ::= { agentxConnectionEntry 2 }
+
+ agentxConnTransportDomain OBJECT-TYPE
+   SYNTAX       TDomain
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "The transport protocol in use for this connection to the
+      subagent.
+     "
+   ::= { agentxConnectionEntry 3 }
+
+ agentxConnTransportAddress OBJECT-TYPE
+   SYNTAX       AgentxTAddress
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "The transport address of the remote (subagent) end of this
+      connection to the master agent.  This object may be zero-length
+      for unix-domain sockets (and possibly other types of transport
+      addresses) since the subagent need not bind a filename to its
+      local socket.
+     "
+   ::= { agentxConnectionEntry 4 }
+
+ -- The AgentX Subagent Session Group
+
+ agentxSessionTableLastChange OBJECT-TYPE
+  SYNTAX      TimeStamp
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The value of sysUpTime when the last row creation or deletion
+      occurred in the agentxSessionTable.
+     "
+  ::= { agentxSession 1 }
+
+ agentxSessionTable OBJECT-TYPE
+  SYNTAX      SEQUENCE OF AgentxSessionEntry
+  MAX-ACCESS  not-accessible
+  STATUS      current
+  DESCRIPTION
+     "A table of AgentX subagent sessions currently in effect.
+     "
+  ::= { agentxSession 2 }
+
+ agentxSessionEntry OBJECT-TYPE
+  SYNTAX      AgentxSessionEntry
+  MAX-ACCESS  not-accessible
+  STATUS      current
+  DESCRIPTION
+     "Information about a single open session between the AgentX
+      master agent and a subagent is contained in this entry.  An
+      entry is created when a new session is successfully established
+      and is destroyed either when the subagent transport connection
+      has terminated or when the subagent session is closed.
+     "
+  INDEX       { agentxConnIndex, agentxSessionIndex }
+  ::= { agentxSessionTable 1 }
+
+ AgentxSessionEntry ::= SEQUENCE {
+  agentxSessionIndex         Unsigned32,
+  agentxSessionObjectID      OBJECT IDENTIFIER,
+  agentxSessionDescr         SnmpAdminString,
+  agentxSessionAdminStatus   INTEGER,
+  agentxSessionOpenTime      TimeStamp,
+  agentxSessionAgentXVer     INTEGER,
+  agentxSessionTimeout       INTEGER
+ }
+
+ agentxSessionIndex OBJECT-TYPE
+  SYNTAX      Unsigned32 (0..4294967295)
+  MAX-ACCESS  not-accessible
+  STATUS      current
+  DESCRIPTION
+     "A unique index for the subagent session.  It is the same as
+      h.sessionID defined in the agentx header.  Note that if
+      a subagent's session with the master agent is closed for
+      any reason its index should not be re-used.
+      A value of zero(0) is specifically allowed in order
+      to be compatible with the definition of h.sessionId.
+     "
+  ::= { agentxSessionEntry 1 }
+
+ agentxSessionObjectID OBJECT-TYPE
+  SYNTAX      OBJECT IDENTIFIER
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "This is taken from the o.id field of the agentx-Open-PDU.
+      This attribute will report a value of '0.0' for subagents
+      not supporting the notion of an AgentX session object
+      identifier.
+     "
+  ::= { agentxSessionEntry 2 }
+
+ agentxSessionDescr OBJECT-TYPE
+  SYNTAX      SnmpAdminString
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "A textual description of the session.  This is analogous to
+      sysDescr defined in the SNMPv2-MIB in RFC 1907 [19] and is
+      taken from the o.descr field of the agentx-Open-PDU.
+      This attribute will report a zero-length string value for
+      subagents not supporting the notion of a session description.
+     "
+  ::= { agentxSessionEntry 3 }
+
+ agentxSessionAdminStatus OBJECT-TYPE
+  SYNTAX      INTEGER {
+                 up(1),
+                 down(2)
+              }
+  MAX-ACCESS  read-write
+  STATUS      current
+  DESCRIPTION
+     "The administrative (desired) status of the session.  Setting
+      the value to 'down(2)' closes the subagent session (with c.reason
+      set to 'reasonByManager').
+     "
+  ::= { agentxSessionEntry 4 }
+
+ agentxSessionOpenTime OBJECT-TYPE
+  SYNTAX      TimeStamp
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The value of sysUpTime when this session was opened and,
+      therefore, its value when this entry was added to the table.
+     "
+  ::= { agentxSessionEntry 5 }
+
+ agentxSessionAgentXVer OBJECT-TYPE
+  SYNTAX      INTEGER (1..255)
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The version of the AgentX protocol supported by the
+      session.  This must be less than or equal to the value of
+      agentxMasterAgentXVer.
+     "
+  ::= { agentxSessionEntry 6 }
+
+ agentxSessionTimeout OBJECT-TYPE
+  SYNTAX     INTEGER (0..255)
+  UNITS      "seconds"
+  MAX-ACCESS read-only
+  STATUS     current
+  DESCRIPTION
+     "The length of time, in seconds, that a master agent should
+      allow to elapse after dispatching a message to this session
+      before it regards the subagent as not responding.  This value
+      is taken from the o.timeout field of the agentx-Open-PDU.
+      This is a session-specific value that may be overridden by
+      values associated with the specific registered MIB regions
+      (see agentxRegTimeout). A value of zero(0) indicates that
+      the master agent's default timeout value should be used
+
+      (see agentxDefaultTimeout).
+     "
+  ::= { agentxSessionEntry 7 }
+
+ -- The AgentX Registration Group
+
+ agentxRegistrationTableLastChange OBJECT-TYPE
+  SYNTAX      TimeStamp
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The value of sysUpTime when the last row creation or deletion
+      occurred in the agentxRegistrationTable.
+     "
+  ::= { agentxRegistration 1 }
+
+ agentxRegistrationTable OBJECT-TYPE
+  SYNTAX      SEQUENCE OF AgentxRegistrationEntry
+  MAX-ACCESS  not-accessible
+  STATUS      current
+  DESCRIPTION
+     "A table of registered regions.
+     "
+  ::= { agentxRegistration 2 }
+
+ agentxRegistrationEntry OBJECT-TYPE
+  SYNTAX      AgentxRegistrationEntry
+  MAX-ACCESS  not-accessible
+  STATUS      current
+  DESCRIPTION
+     "Contains information for a single registered region.  An
+      entry is created when a session  successfully registers a
+      region and is destroyed for any of three reasons: this region
+      is unregistered by the session, the session is closed,
+      or the subagent connection is closed.
+     "
+  INDEX       { agentxConnIndex, agentxSessionIndex, agentxRegIndex }
+  ::= { agentxRegistrationTable 1 }
+
+ AgentxRegistrationEntry ::= SEQUENCE {
+  agentxRegIndex           Unsigned32,
+  agentxRegContext         OCTET STRING,
+  agentxRegStart           OBJECT IDENTIFIER,
+  agentxRegRangeSubId      Unsigned32,
+  agentxRegUpperBound      Unsigned32,
+  agentxRegPriority        Unsigned32,
+  agentxRegTimeout         INTEGER,
+  agentxRegInstance        TruthValue }
+
+ agentxRegIndex OBJECT-TYPE
+  SYNTAX      Unsigned32 (1..4294967295)
+  MAX-ACCESS  not-accessible
+  STATUS      current
+  DESCRIPTION
+     "agentxRegIndex uniquely identifies a registration entry.
+      This value is constant for the lifetime of an entry.
+     "
+  ::= { agentxRegistrationEntry 1 }
+
+ agentxRegContext OBJECT-TYPE
+  SYNTAX      OCTET STRING
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The context in which the session supports the objects in this
+      region.  A zero-length context indicates the default context.
+     "
+  ::= { agentxRegistrationEntry 2 }
+
+ agentxRegStart OBJECT-TYPE
+  SYNTAX      OBJECT IDENTIFIER
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The starting OBJECT IDENTIFIER of this registration entry.  The
+      session identified by agentxSessionIndex implements objects
+      starting at this value (inclusive).  Note that this value could
+      identify an object type, an object instance, or a partial object
+      instance.
+     "
+  ::= { agentxRegistrationEntry 3 }
+
+ agentxRegRangeSubId OBJECT-TYPE
+  SYNTAX      Unsigned32
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "agentxRegRangeSubId is used to specify the range.  This is
+      taken from r.region_subid in the registration PDU.  If the value
+      of this object is zero, no range is specified.  If it is non-zero,
+      it identifies the `nth' sub-identifier in r.region for which
+      this entry's agentxRegUpperBound value is substituted in the
+      OID for purposes of defining the region's upper bound.
+     "
+  ::= { agentxRegistrationEntry 4 }
+
+ agentxRegUpperBound OBJECT-TYPE
+  SYNTAX      Unsigned32
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+    "agentxRegUpperBound represents the upper-bound sub-identifier in
+     a registration.  This is taken from the r.upper_bound in the
+     registration PDU.  If agentxRegRangeSubid (r.region_subid) is
+     zero, this value is also zero and is not used to define an upper
+     bound for this registration.
+    "
+  ::= { agentxRegistrationEntry 5 }
+
+ agentxRegPriority OBJECT-TYPE
+  SYNTAX      Unsigned32
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The registration priority.  Lower values have higher priority.
+      This value is taken from r.priority in the register PDU.
+      Sessions should use the value of 127 for r.priority if a
+      default value is desired.
+     "
+  ::= { agentxRegistrationEntry 6 }
+
+ agentxRegTimeout OBJECT-TYPE
+  SYNTAX      INTEGER (0..255)
+  UNITS       "seconds"
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The timeout value, in seconds, for responses to
+      requests associated with this registered MIB region.
+      A value of zero(0) indicates the default value (indicated
+      by by agentxSessionTimeout or agentxDefaultTimeout) is to
+      be used.  This value is taken from the r.timeout field of
+      the agentx-Register-PDU.
+     "
+  ::= { agentxRegistrationEntry 7 }
+
+ agentxRegInstance OBJECT-TYPE
+  SYNTAX      TruthValue
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+     "The value of agentxRegInstance is `true' for
+      registrations for which the INSTANCE_REGISTRATION
+      was set, and is `false' for all other registrations.
+     "
+  ::= { agentxRegistrationEntry 8 }
+
+ -- Conformance Statements for AgentX
+
+ agentxConformance     OBJECT IDENTIFIER ::= { agentxMIB 2 }
+ agentxMIBGroups       OBJECT IDENTIFIER ::= { agentxConformance 1 }
+ agentxMIBCompliances  OBJECT IDENTIFIER ::= { agentxConformance 2 }
+
+ -- Compliance Statements for AgentX
+
+ agentxMIBCompliance MODULE-COMPLIANCE
+  STATUS      current
+  DESCRIPTION
+     "The compliance statement for SNMP entities that implement the
+      AgentX protocol.  Note that a compliant agent can implement all
+      objects in this MIB module as read-only.
+     "
+  MODULE -- this module
+     MANDATORY-GROUPS  { agentxMIBGroup }
+
+     OBJECT agentxSessionAdminStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required.
+           "
+  ::= { agentxMIBCompliances 1 }
+
+ agentxMIBGroup OBJECT-GROUP
+  OBJECTS {
+     agentxDefaultTimeout,
+     agentxMasterAgentXVer,
+     agentxConnTableLastChange,
+     agentxConnOpenTime,
+     agentxConnTransportDomain,
+     agentxConnTransportAddress,
+     agentxSessionTableLastChange,
+     agentxSessionTimeout,
+     agentxSessionObjectID,
+     agentxSessionDescr,
+     agentxSessionAdminStatus,
+     agentxSessionOpenTime,
+     agentxSessionAgentXVer,
+     agentxRegistrationTableLastChange,
+     agentxRegContext,
+     agentxRegStart,
+     agentxRegRangeSubId,
+     agentxRegUpperBound,
+     agentxRegPriority,
+     agentxRegTimeout,
+     agentxRegInstance
+    }
+  STATUS      current
+  DESCRIPTION
+     "All accessible objects in the AgentX MIB.
+     "
+  ::= { agentxMIBGroups 1 }
+
+ END
diff --git a/snmp_builder/mibs/AGGREGATE-MIB.mib b/snmp_builder/mibs/AGGREGATE-MIB.mib
new file mode 100644
index 0000000..b1b5b45
--- /dev/null
+++ b/snmp_builder/mibs/AGGREGATE-MIB.mib
@@ -0,0 +1,477 @@
+   AGGREGATE-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+      MODULE-IDENTITY,  experimental, Unsigned32,
+      OBJECT-TYPE, Opaque
+                 FROM SNMPv2-SMI
+      OwnerString
+                 FROM RMON-MIB
+      RowStatus, StorageType, TEXTUAL-CONVENTION
+                 FROM SNMPv2-TC
+      MODULE-COMPLIANCE, OBJECT-GROUP
+                 FROM SNMPv2-CONF
+      SnmpAdminString
+                 FROM SNMP-FRAMEWORK-MIB;
+
+  aggrMIB MODULE-IDENTITY
+       LAST-UPDATED "200604270000Z"        --  27th April, 2006
+       ORGANIZATION "Cyber Solutions Inc. NetMan Working Group"
+       CONTACT-INFO
+      "                      Glenn Mansfield Keeni
+                     Postal: Cyber Solutions Inc.
+                             6-6-3, Minami Yoshinari
+                             Aoba-ku, Sendai, Japan 989-3204.
+                        Tel: +81-22-303-4012
+                        Fax: +81-22-303-4015
+                     E-mail: glenn@cysols.com
+
+          Support Group E-mail: mibsupport@cysols.com"
+          DESCRIPTION
+                  "The MIB for servicing aggregate objects.
+
+                   Copyright (C) The Internet Society (2006).  This
+                   version of this MIB module is part of RFC 4498;
+                   see the RFC itself for full legal notices.
+                  "
+          REVISION    "200604270000Z"      -- 27th April, 2006
+          DESCRIPTION "Initial version, published as RFC 4498."
+               ::= { experimental 123 }
+
+   AggrMOErrorStatus ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model the error status of the
+        constituent MO instances.  The error status for a
+        constituent MO instance is given in terms of two elements:
+          o The moIndex, which indicates the position of the MO
+            instance (starting at 1) in the value of the aggregated
+            MO instance.
+          o The moError, which indicates the error that was
+            encountered in fetching that MO instance.
+        The syntax in ASN.1 Notation will be
+        ErrorStatus :: = SEQUENCE {
+           moIndex  Integer32,
+           moError  SnmpPduErrorStatus
+        }
+        AggrMOErrorStatus ::= SEQUENCE OF {
+           ErrorStatus
+        }
+        Note1: The command responder will supply values for all
+               constituent MO instances, in the same order in
+               which the MO instances are specified for the AgMO.
+               If an error is encountered for an MO instance, then
+               the corresponding value will have an ASN.1 value NULL,
+               and an error will be flagged in the corresponding
+               AggrMOErrorStatus object.
+               Only MOs for which errors have been encountered will
+               have their corresponding moIndex and moError values
+               set.
+        Note2: The error code for the component MO instances will be
+               in accordance with the SnmpPduErrorStatus TC defined
+               in the DISMAN-SCHEDULE-MIB [RFC3231].
+        Note3: The command generator will need to know
+               constituent MO instances and their order to correctly
+               interpret AggrMOErrorStatus.
+       "
+     SYNTAX      Opaque (SIZE (0..1024))
+
+   AggrMOValue ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model the aggregate
+        MOs.  It will have a format dependent on the constituent
+        MOs, a sequence of values.  The syntax in ASN.1 Notation will
+        be
+        MOValue :: = SEQUENCE {
+             value ObjectSyntax
+        }
+        where 'value' is the value of a constituent MO instance.
+        AggrMOValue :: = SEQUENCE OF {
+            MOValue
+        }
+
+        Note: The command generator will need to know the
+        constituent MO instances and their order to
+        correctly interpret AggrMOValue."
+     SYNTAX      Opaque (SIZE (0..1024))
+
+   AggrMOCompressedValue ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model the compressed
+        aggregate MOs."
+     SYNTAX      OCTET STRING (SIZE (0..1024))
+
+--
+-- The aggregation control table
+-- There will be a row for each aggregate MO
+--
+   aggrCtlTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AggrCtlEntry
+        MAX-ACCESS  not-accessible
+        STATUS current
+        DESCRIPTION
+          "A table that controls the aggregation of the MOs."
+        ::= {aggrMIB 1}
+
+    aggrCtlEntry OBJECT-TYPE
+        SYNTAX  AggrCtlEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+          "A row of the control table that defines one aggregated
+           MO.
+
+           Entries in this table are required to survive a reboot
+           of the managed entity depending on the value of the
+           corresponding aggrCtlEntryStorageType instance.
+          "
+        INDEX {aggrCtlEntryID }
+        ::= {aggrCtlTable 1 }
+
+    AggrCtlEntry ::= SEQUENCE {
+       aggrCtlEntryID
+                     SnmpAdminString,
+       aggrCtlMOIndex
+                     Unsigned32,
+       aggrCtlMODescr
+                     SnmpAdminString,
+       aggrCtlCompressionAlgorithm
+                     INTEGER,
+       aggrCtlEntryOwner
+                     OwnerString,
+       aggrCtlEntryStorageType
+                     StorageType,
+       aggrCtlEntryStatus
+                     RowStatus
+    }
+
+   aggrCtlEntryID OBJECT-TYPE
+        SYNTAX SnmpAdminString (SIZE(1..32))
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+          "A locally unique, administratively assigned name
+           for this aggregated MO.  It is used as an index to
+           uniquely identify this row in the table."
+        ::= { aggrCtlEntry 1 }
+
+   aggrCtlMOIndex OBJECT-TYPE
+        SYNTAX Unsigned32 (1..2147483647)
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+          "A pointer to a group of MOs identified by aggrMOEntryID
+           in the aggrMOTable.  This is the group of MOs that will
+           be aggregated."
+        ::= { aggrCtlEntry 2 }
+
+   aggrCtlMODescr OBJECT-TYPE
+        SYNTAX SnmpAdminString (SIZE(0..64))
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+          "A textual description of the object that is
+           being aggregated."
+        ::= {aggrCtlEntry 3}
+
+   -- only one compression algorithm is defined as of now.
+   aggrCtlCompressionAlgorithm OBJECT-TYPE
+        SYNTAX INTEGER {
+               none      (1),
+               deflate   (2)
+        }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+          "The compression algorithm that will be used by
+           the agent to compress the value of the aggregated
+           object.
+           The deflate algorithm and corresponding data format
+           specification is described in RFC 1951.  It is
+           compatible with the widely used gzip utility.
+          "
+        REFERENCE
+          "RFC1951 : DEFLATE Compressed Data Format Specification
+           version 1.3
+          "
+        DEFVAL { none }
+        ::= {aggrCtlEntry 4}
+
+   aggrCtlEntryOwner OBJECT-TYPE
+        SYNTAX OwnerString
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+          "The entity that created this entry."
+        ::= {aggrCtlEntry 5}
+
+   aggrCtlEntryStorageType OBJECT-TYPE
+        SYNTAX StorageType
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "This object defines whether the parameters defined in
+            this row are kept in volatile storage and lost upon
+            reboot or backed up by non-volatile (permanent)
+            storage.
+
+            Conceptual rows having the value 'permanent' need not
+            allow write-access to any columnar objects in the row.
+           "
+        ::= {aggrCtlEntry 6}
+
+   aggrCtlEntryStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions.
+            Objects in a row can be modified only when the value of
+            this object in the corresponding conceptual row is not
+            'active'.
+            Thus, to modify one or more of the objects in this
+            conceptual row,
+              a. change the row status to 'notInService',
+              b. change the values of the row, and
+              c. change the row status to 'active'.
+            The aggrCtlEntryStatus may be changed to 'active' if
+            all the MOs in the conceptual row have been assigned
+            valid values.
+           "
+        ::= {aggrCtlEntry 7}
+
+--
+-- The Table of primary(simple) MOs
+--
+   aggrMOTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AggrMOEntry
+        MAX-ACCESS  not-accessible
+        STATUS current
+        DESCRIPTION
+           "The table of primary(simple) MOs that will be aggregated.
+            Each row in this table represents a MO that will be
+            aggregated.  The aggrMOEntryID index is used to identify
+            the group of MOs that will be aggregated.  The
+            aggrMOIndex instance in the corresponding row of the
+            aggrCtlTable will have a value equal to the value of
+            aggrMOEntryID.  The aggrMOEntryMOID index is used to
+            identify an MO in the group.
+           "
+        ::= {aggrMIB 2}
+
+    aggrMOEntry OBJECT-TYPE
+        SYNTAX  AggrMOEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+           "A row of the table that specifies one MO.
+            Entries in this table are required to survive a reboot
+            of the managed entity depending on the value of the
+            corresponding aggrMOEntryStorageType instance.
+           "
+        INDEX { aggrMOEntryID, aggrMOEntryMOID }
+        ::= {aggrMOTable 1 }
+
+    AggrMOEntry ::= SEQUENCE {
+       aggrMOEntryID
+                     Unsigned32,
+       aggrMOEntryMOID
+                     Unsigned32,
+       aggrMOInstance
+                     OBJECT IDENTIFIER,
+       aggrMODescr
+                     SnmpAdminString,
+       aggrMOEntryStorageType
+                     StorageType,
+       aggrMOEntryStatus
+                     RowStatus
+    }
+
+   aggrMOEntryID OBJECT-TYPE
+        SYNTAX Unsigned32 (1..2147483647)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+          "An index uniquely identifying a group of MOs
+           that will be aggregated."
+        ::= { aggrMOEntry 1 }
+
+   aggrMOEntryMOID OBJECT-TYPE
+        SYNTAX Unsigned32 (1..65535)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+          "An index to uniquely identify an MO instance in the
+           group of MO instances that will be aggregated."
+        ::= { aggrMOEntry 2 }
+
+   aggrMOInstance OBJECT-TYPE
+        SYNTAX OBJECT IDENTIFIER
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+          "The OID of the MO instance, the value of which will
+           be sampled by the agent."
+        ::= { aggrMOEntry 3 }
+
+   aggrMODescr OBJECT-TYPE
+        SYNTAX SnmpAdminString (SIZE(0..64))
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "A textual description of the object that will
+            be aggregated."
+        ::= {aggrMOEntry 4}
+
+   aggrMOEntryStorageType OBJECT-TYPE
+        SYNTAX StorageType
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "This object defines whether the parameters defined in
+            this row are kept in volatile storage and lost upon
+            reboot or backed up by non-volatile (permanent)
+            storage.
+            Conceptual rows having the value 'permanent' need not
+            allow write-access to any columnar objects in the row.
+           "
+        ::= {aggrMOEntry 5}
+
+   aggrMOEntryStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions.
+            Objects in a row can be modified only when the value of
+            this object in the corresponding conceptual row is not
+            'active'.
+            Thus, to modify one or more of the objects in this
+            conceptual row,
+              a. change the row status to 'notInService',
+              b. change the values of the row, and
+              c. change the row status to 'active'.
+            The aggrMOEntryStatus may be changed to 'active' iff
+            all the MOs in the conceptual row have been assigned
+            valid values.
+           "
+        ::= {aggrMOEntry 6}
+
+   --
+   -- aggrDataTable: The Table of Data.  Each row represents a Data
+
+   --                set.  aggrCtlEntryID is the key to the table.
+   --                It is used to identify instances of the
+   --                aggregated MO that are present in the table.
+   --
+   aggrDataTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AggrDataEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+           "Each row of this table contains information
+            about an aggregateMO indexed by aggrCtlEntryID."
+        ::= {aggrMIB 3}
+
+   aggrDataEntry OBJECT-TYPE
+        SYNTAX  AggrDataEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+           "Entry containing information pertaining to
+            an aggregate MO."
+        INDEX {aggrCtlEntryID}
+        ::= {aggrDataTable 1 }
+
+   AggrDataEntry ::= SEQUENCE {
+      aggrDataRecord
+                 AggrMOValue,
+      aggrDataRecordCompressed
+                 AggrMOCompressedValue,
+      aggrDataErrorRecord
+                 AggrMOErrorStatus
+      }
+
+   aggrDataRecord OBJECT-TYPE
+        SYNTAX AggrMOValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+          "The snapshot value of the aggregated MO.
+           Note that the access privileges to this object will be
+           governed by the access privileges of the component
+           objects.  Thus, an entity attempting to access an
+           instance of this MO MUST have access rights to all the
+           component instance objects and this MO instance.
+          "
+        ::= { aggrDataEntry 1}
+
+   aggrDataRecordCompressed OBJECT-TYPE
+        SYNTAX AggrMOCompressedValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+          "The compressed value of the aggregated MO.
+           The compression algorithm will depend on the
+           aggrCtlCompressionAlgorithm given in the corresponding
+           aggrCtlEntry.  If the value of the corresponding
+           aggrCtlCompressionAlgorithm is (1) 'none', then the value
+           of all instances of this object will be a string of zero
+           length.
+           Note that the access privileges to this object will be
+           governed by the access privileges of the component
+           objects.  Thus, an entity attempting to access an instance
+           of this MO MUST have access rights to all the component
+           instance objects and this MO instance.
+          "
+        ::= { aggrDataEntry 2}
+
+   aggrDataErrorRecord OBJECT-TYPE
+        SYNTAX AggrMOErrorStatus
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+           "The error status corresponding to the MO instances
+            aggregated in aggrDataRecord (and
+            aggrDataRecordCompressed)."
+        ::= { aggrDataEntry 3}
+
+    -- Conformance information
+   aggrConformance OBJECT IDENTIFIER ::= { aggrMIB 4 }
+   aggrGroups      OBJECT IDENTIFIER ::= { aggrConformance 1 }
+   aggrCompliances OBJECT IDENTIFIER ::= { aggrConformance 2 }
+
+    -- Compliance statements
+   aggrMibCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for SNMP entities
+                 that implement the AGGREGATE-MIB."
+        MODULE  -- this module
+            MANDATORY-GROUPS { aggrMibBasicGroup }
+        ::= { aggrCompliances 1 }
+
+    -- Units of conformance
+   aggrMibBasicGroup    OBJECT-GROUP
+        OBJECTS {
+                   aggrCtlMOIndex,
+                   aggrCtlMODescr,
+                   aggrCtlCompressionAlgorithm,
+                   aggrCtlEntryOwner,
+                   aggrCtlEntryStorageType,
+                   aggrCtlEntryStatus,
+                   aggrMOInstance,
+                   aggrMODescr,
+                   aggrMOEntryStorageType,
+                   aggrMOEntryStatus,
+                   aggrDataRecord,
+                   aggrDataRecordCompressed,
+                   aggrDataErrorRecord
+       }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects for aggregation of MOs."
+        ::= { aggrGroups 1 }
+   END
diff --git a/snmp_builder/mibs/ALARM-MIB.mib b/snmp_builder/mibs/ALARM-MIB.mib
new file mode 100644
index 0000000..f17a411
--- /dev/null
+++ b/snmp_builder/mibs/ALARM-MIB.mib
@@ -0,0 +1,1127 @@
+ALARM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   Integer32, Unsigned32, Gauge32,
+   TimeTicks, Counter32, Counter64,
+   IpAddress, Opaque, mib-2,
+   zeroDotZero
+       FROM SNMPv2-SMI                 -- [RFC2578]
+   DateAndTime,
+   RowStatus, RowPointer,
+   TEXTUAL-CONVENTION
+       FROM SNMPv2-TC                  -- [RFC2579]
+   SnmpAdminString
+       FROM SNMP-FRAMEWORK-MIB         -- [RFC3411]
+   InetAddressType, InetAddress
+       FROM INET-ADDRESS-MIB           -- [RFC3291]
+   MODULE-COMPLIANCE, OBJECT-GROUP,
+   NOTIFICATION-GROUP
+       FROM SNMPv2-CONF                -- [RFC2580]
+   ZeroBasedCounter32
+       FROM RMON2-MIB;                 -- [RFC2021]
+
+  alarmMIB MODULE-IDENTITY
+      LAST-UPDATED "200409090000Z"  -- September 09, 2004
+      ORGANIZATION "IETF Distributed Management Working Group"
+      CONTACT-INFO
+           "WG EMail: disman@ietf.org
+           Subscribe: disman-request@ietf.org
+           http://www.ietf.org/html.charters/disman-charter.html
+
+           Chair:     Randy Presuhn
+                      randy_presuhn@mindspring.com
+
+           Editors:   Sharon Chisholm
+                      Nortel Networks
+                      PO Box 3511 Station C
+                      Ottawa, Ont.  K1Y 4H7
+                      Canada
+                      schishol@nortelnetworks.com
+
+                      Dan Romascanu
+                      Avaya
+                      Atidim Technology Park, Bldg. #3
+                      Tel Aviv, 61131
+                      Israel
+                      Tel: +972-3-645-8414
+                      Email: dromasca@avaya.com"
+      DESCRIPTION
+           "The MIB module describes a generic solution
+           to model alarms and to store the current list
+           of active alarms.
+
+           Copyright (C) The Internet Society (2004).  The
+           initial version of this MIB module was published
+           in RFC 3877.  For full legal notices see the RFC
+           itself.  Supplementary information may be available on:
+           http://www.ietf.org/copyrights/ianamib.html"
+      REVISION    "200409090000Z"  -- September 09, 2004
+      DESCRIPTION
+          "Initial version, published as RFC 3877."
+      ::= { mib-2 118 }
+
+alarmObjects OBJECT IDENTIFIER ::= { alarmMIB 1 }
+
+alarmNotifications OBJECT IDENTIFIER ::= { alarmMIB 0 }
+
+alarmModel OBJECT IDENTIFIER ::= { alarmObjects 1 }
+
+alarmActive  OBJECT IDENTIFIER ::= { alarmObjects 2 }
+
+alarmClear OBJECT IDENTIFIER ::= { alarmObjects 3 }
+
+-- Textual Conventions
+
+ -- ResourceId is intended to be a general textual convention
+ -- that can be used outside of the set of MIBs related to
+ -- Alarm Management.
+
+ResourceId ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "A unique identifier for this resource.
+
+            The type of the resource can be determined by looking
+            at the OID that describes the resource.
+
+            Resources must be identified in a consistent manner.
+            For example, if this resource is an interface, this
+            object MUST point to an ifIndex and if this resource
+            is a physical entity [RFC2737], then this MUST point
+            to an entPhysicalDescr, given that entPhysicalIndex
+            is not accessible.  In general, the value is the
+            name of the instance of the first accessible columnar
+            object in the conceptual row of a table that is
+            meaningful for this resource type, which SHOULD
+            be defined in an IETF standard MIB."
+    SYNTAX         OBJECT IDENTIFIER
+
+ -- LocalSnmpEngineOrZeroLenStr is intended to be a general
+ -- textual convention that can be used outside of the set of
+ -- MIBs related to Alarm Management.
+
+  LocalSnmpEngineOrZeroLenStr ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An SNMP Engine ID or a zero-length string.  The
+           instantiation of this textual convention will provide
+           guidance on when this will be an SNMP Engine ID and
+           when it will be a zero lengths string"
+      SYNTAX         OCTET STRING (SIZE(0 | 5..32))
+
+-- Alarm Model
+
+alarmModelLastChanged  OBJECT-TYPE
+      SYNTAX      TimeTicks
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The value of sysUpTime at the time of the last
+         creation, deletion or modification of an entry in
+         the alarmModelTable.
+
+         If the number and content of entries has been unchanged
+         since the last re-initialization of the local network
+         management subsystem, then the value of this object
+         MUST be zero."
+      ::= { alarmModel 1 }
+
+alarmModelTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF AlarmModelEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "A table of information about possible alarms on the system,
+        and how they have been modelled."
+   ::= { alarmModel 2 }
+
+alarmModelEntry OBJECT-TYPE
+   SYNTAX      AlarmModelEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "Entries appear in this table for each possible alarm state.
+       This table MUST be persistent across system reboots."
+   INDEX       { alarmListName, alarmModelIndex, alarmModelState }
+   ::= { alarmModelTable 1 }
+
+AlarmModelEntry ::= SEQUENCE {
+   alarmModelIndex                 Unsigned32,
+   alarmModelState                 Unsigned32,
+   alarmModelNotificationId        OBJECT IDENTIFIER,
+   alarmModelVarbindIndex          Unsigned32,
+   alarmModelVarbindValue          Integer32,
+   alarmModelDescription           SnmpAdminString,
+   alarmModelSpecificPointer       RowPointer,
+   alarmModelVarbindSubtree        OBJECT IDENTIFIER,
+   alarmModelResourcePrefix        OBJECT IDENTIFIER,
+   alarmModelRowStatus             RowStatus
+   }
+
+alarmModelIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+       "An integer that acts as an alarm Id
+       to uniquely identify each alarm
+       within the named alarm list. "
+   ::= { alarmModelEntry 1 }
+
+alarmModelState OBJECT-TYPE
+   SYNTAX  Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS       current
+   DESCRIPTION
+        "A value of 1 MUST indicate a clear alarm state.
+        The value of this object MUST be less than the
+        alarmModelState of more severe alarm states for
+        this alarm.  The value of this object MUST be more
+        than the alarmModelState of less severe alarm states
+        for this alarm."
+    ::= { alarmModelEntry 2 }
+
+alarmModelNotificationId OBJECT-TYPE
+   SYNTAX      OBJECT IDENTIFIER
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "The NOTIFICATION-TYPE object identifier of this alarm
+       state transition.  If there is no notification associated
+       with this alarm state, the value of this object MUST be
+       '0.0'"
+   DEFVAL { zeroDotZero }
+   ::= { alarmModelEntry 3 }
+
+alarmModelVarbindIndex  OBJECT-TYPE
+   SYNTAX  Unsigned32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+     "The index into the varbind listing of the notification
+     indicated by alarmModelNotificationId which helps
+     signal that the given alarm has changed state.
+     If there is no applicable varbind, the value of this
+     object MUST be zero.
+
+     Note that the value of alarmModelVarbindIndex acknowledges
+     the existence of the first two obligatory varbinds in
+     the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0
+     and snmpTrapOID.0).  That is, a value of 2 refers to
+     the snmpTrapOID.0.
+
+     If the incoming notification is instead an SNMPv1 Trap-PDU,
+     then an appropriate value for sysUpTime.0 or snmpTrapOID.0
+     shall be determined by using the rules in section 3.1 of
+     [RFC3584]"
+     DEFVAL { 0 }
+    ::= { alarmModelEntry 4 }
+
+alarmModelVarbindValue OBJECT-TYPE
+   SYNTAX  Integer32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+     "The value that the varbind indicated by
+     alarmModelVarbindIndex takes to indicate
+     that the alarm has entered this state.
+
+     If alarmModelVarbindIndex has a value of 0, so
+     MUST alarmModelVarbindValue.
+     "
+     DEFVAL { 0 }
+    ::= { alarmModelEntry 5 }
+
+alarmModelDescription OBJECT-TYPE
+    SYNTAX SnmpAdminString
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+      "A brief description of this alarm and state suitable
+      to display to operators."
+   DEFVAL { "" }
+   ::= { alarmModelEntry 6 }
+
+alarmModelSpecificPointer OBJECT-TYPE
+   SYNTAX     RowPointer
+   MAX-ACCESS read-create
+   STATUS     current
+   DESCRIPTION
+     "If no additional, model-specific Alarm MIB is supported by
+      the system the value of this object is `0.0'and attempts
+      to set it to any other value MUST be rejected appropriately.
+
+      When a model-specific Alarm MIB is supported, this object
+      MUST refer to the first accessible object in a corresponding
+      row of the model definition in one of these model-specific
+      MIB and attempts to set this object to { 0 0 } or any other
+      value MUST be rejected appropriately."
+   DEFVAL { zeroDotZero }
+   ::= { alarmModelEntry 7 }
+
+  alarmModelVarbindSubtree  OBJECT-TYPE
+     SYNTAX  OBJECT IDENTIFIER
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+       "The name portion of each VarBind in the notification,
+        in order, is compared to the value of this object.
+        If the name is equal to or a subtree of the value
+        of this object, for purposes of computing the value
+
+        of AlarmActiveResourceID the 'prefix' will be the
+        matching portion, and the 'indexes' will be any
+        remainder.  The examination of varbinds ends with
+        the first match.  If the value of this object is 0.0,
+        then the first varbind, or in the case of v2, the
+        first varbind after the timestamp and the trap
+        OID, will always be matched.
+       "
+      DEFVAL { zeroDotZero }
+     ::= { alarmModelEntry 8 }
+
+  alarmModelResourcePrefix  OBJECT-TYPE
+     SYNTAX  OBJECT IDENTIFIER
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+       "The value of AlarmActiveResourceId is computed
+        by appending any indexes extracted in accordance
+        with the description of alarmModelVarbindSubtree
+        onto the value of this object.  If this object's
+        value is 0.0, then the 'prefix' extracted is used
+        instead.
+       "
+     DEFVAL { zeroDotZero }
+     ::= { alarmModelEntry 9 }
+
+alarmModelRowStatus OBJECT-TYPE
+   SYNTAX     RowStatus
+   MAX-ACCESS read-create
+   STATUS     current
+   DESCRIPTION
+    "Control for creating and deleting entries.  Entries may be
+    modified while active.  Alarms whose alarmModelRowStatus is
+    not active will not appear in either the alarmActiveTable
+    or the alarmClearTable.  Setting this object to notInService
+    cannot be used as an alarm suppression mechanism.  Entries
+    that are notInService will disappear as described in RFC2579.
+
+    This row can not be modified while it is being
+    referenced by a value of alarmActiveModelPointer.  In these
+    cases, an error of `inconsistentValue' will be returned to
+    the manager.
+
+    This entry may be deleted while it is being
+    referenced by a value of alarmActiveModelPointer.  This results
+    in the deletion of this entry and entries in the active alarms
+    referencing this entry via an alarmActiveModelPointer.
+
+    As all read-create objects in this table have a DEFVAL clause,
+    there is no requirement that any object be explicitly set
+    before this row can become active.  Note that a row consisting
+    only of default values is not very meaningful."
+   ::= { alarmModelEntry 10 }
+
+-- Active Alarm Table --
+
+alarmActiveLastChanged  OBJECT-TYPE
+   SYNTAX      TimeTicks
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The value of sysUpTime at the time of the last
+       creation or deletion of an entry in the alarmActiveTable.
+       If the number of entries has been unchanged since the
+       last re-initialization of the local network management
+       subsystem, then this object contains a zero value."
+   ::= { alarmActive 1 }
+
+ alarmActiveOverflow  OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "active alarms"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of active alarms that have not been put into
+         the alarmActiveTable since system restart as a result
+         of extreme resource constraints."
+     ::= { alarmActive 5 }
+
+alarmActiveTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF AlarmActiveEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "A table of Active Alarms entries."
+   ::= { alarmActive 2 }
+
+alarmActiveEntry OBJECT-TYPE
+   SYNTAX      AlarmActiveEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "Entries appear in this table when alarms are raised.  They
+        are removed when the alarm is cleared.
+
+        If under extreme resource constraint the system is unable to
+
+        add any more entries into this table, then the
+        alarmActiveOverflow statistic will be increased by one."
+   INDEX       { alarmListName, alarmActiveDateAndTime,
+                 alarmActiveIndex }
+   ::= { alarmActiveTable 1 }
+
+AlarmActiveEntry ::= SEQUENCE {
+   alarmListName                    SnmpAdminString,
+   alarmActiveDateAndTime           DateAndTime,
+   alarmActiveIndex                 Unsigned32,
+   alarmActiveEngineID              LocalSnmpEngineOrZeroLenStr,
+   alarmActiveEngineAddressType     InetAddressType,
+   alarmActiveEngineAddress         InetAddress,
+   alarmActiveContextName           SnmpAdminString,
+   alarmActiveVariables             Unsigned32,
+   alarmActiveNotificationID        OBJECT IDENTIFIER,
+   alarmActiveResourceId            ResourceId,
+   alarmActiveDescription           SnmpAdminString,
+   alarmActiveLogPointer            RowPointer,
+   alarmActiveModelPointer          RowPointer,
+   alarmActiveSpecificPointer       RowPointer }
+
+alarmListName OBJECT-TYPE
+   SYNTAX     SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+    "The name of the list of alarms.  This SHOULD be the same as
+    nlmLogName if the Notification Log MIB [RFC3014] is supported.
+    This SHOULD be the same as, or contain as a prefix, the
+    applicable snmpNotifyFilterProfileName if the
+    SNMP-NOTIFICATION-MIB DEFINITIONS [RFC3413] is supported.
+
+    An implementation may allow multiple named alarm lists, up to
+    some implementation-specific limit (which may be none).  A
+    zero-length list name is reserved for creation and deletion
+    by the managed system, and MUST be used as the default log
+    name by systems that do not support named alarm lists."
+   ::= { alarmActiveEntry 1 }
+
+alarmActiveDateAndTime OBJECT-TYPE
+   SYNTAX      DateAndTime
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "The local date and time when the error occurred.
+
+       This object facilitates retrieving all instances of
+
+       alarms that have been raised or have changed state
+       since a given point in time.
+
+       Implementations MUST include the offset from UTC,
+       if available.  Implementation in environments in which
+       the UTC offset is not available is NOT RECOMMENDED."
+   ::= { alarmActiveEntry 2 }
+
+alarmActiveIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+       "A strictly monotonically increasing integer which
+       acts as the index of entries within the named alarm
+       list.  It wraps back to 1 after it reaches its
+       maximum value."
+   ::= { alarmActiveEntry 3 }
+
+alarmActiveEngineID OBJECT-TYPE
+   SYNTAX      LocalSnmpEngineOrZeroLenStr
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The identification of the SNMP engine at which the alarm
+        originated.  If the alarm is from an SNMPv1 system this
+        object is a zero length string."
+   ::= { alarmActiveEntry 4 }
+
+alarmActiveEngineAddressType OBJECT-TYPE
+   SYNTAX      InetAddressType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+    "This object indicates what type of address is stored in
+    the alarmActiveEngineAddress object - IPv4, IPv6, DNS, etc."
+   ::= { alarmActiveEntry 5 }
+
+alarmActiveEngineAddress OBJECT-TYPE
+   SYNTAX      InetAddress
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+    "The address of the SNMP engine on which the alarm is
+    occurring.
+
+    This object MUST always be instantiated, even if the list
+    can contain alarms from only one engine."
+   ::= { alarmActiveEntry 6 }
+
+alarmActiveContextName OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The name of the SNMP MIB context from which the alarm came.
+        For SNMPv1 alarms this is the community string from the Trap.
+        Note that care MUST be taken when selecting community
+        strings to ensure that these can be represented as a
+        well-formed SnmpAdminString.  Community or Context names
+        that are not well-formed SnmpAdminStrings will be mapped
+        to zero length strings.
+
+        If the alarm's source SNMP engine is known not to support
+        multiple contexts, this object is a zero length string."
+   ::= { alarmActiveEntry 7 }
+
+alarmActiveVariables OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The number of variables in alarmActiveVariableTable for this
+       alarm."
+   ::= { alarmActiveEntry 8 }
+
+alarmActiveNotificationID OBJECT-TYPE
+   SYNTAX      OBJECT IDENTIFIER
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The NOTIFICATION-TYPE object identifier of the alarm
+       state transition that is occurring."
+   ::= { alarmActiveEntry 9 }
+
+alarmActiveResourceId    OBJECT-TYPE
+   SYNTAX      ResourceId
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This object identifies the resource under alarm.
+
+      If there is no corresponding resource, then
+      the value of this object MUST be 0.0."
+   ::= { alarmActiveEntry 10 }
+
+alarmActiveDescription    OBJECT-TYPE
+   SYNTAX      SnmpAdminString
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This object provides a textual description of the
+      active alarm.  This text is generated dynamically by the
+      notification generator to provide useful information
+      to the human operator.  This information SHOULD
+      provide information allowing the operator to locate
+      the resource for which this alarm is being generated.
+      This information is not intended for consumption by
+      automated tools."
+   ::= { alarmActiveEntry 11 }
+
+alarmActiveLogPointer OBJECT-TYPE
+   SYNTAX     RowPointer
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+       "A pointer to the corresponding row in a
+       notification logging MIB where the state change
+       notification for this active alarm is logged.
+       If no log entry applies to this active alarm,
+       then this object MUST have the value of 0.0"
+   ::= { alarmActiveEntry 12 }
+
+alarmActiveModelPointer OBJECT-TYPE
+   SYNTAX     RowPointer
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+       "A pointer to the corresponding row in the
+       alarmModelTable for this active alarm.  This
+       points not only to the alarm model being
+       instantiated, but also to the specific alarm
+       state that is active."
+   ::= { alarmActiveEntry 13 }
+
+alarmActiveSpecificPointer OBJECT-TYPE
+   SYNTAX     RowPointer
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+     "If no additional, model-specific, Alarm MIB is supported by
+     the system this object is `0.0'.  When a model-specific Alarm
+     MIB is supported, this object is the instance pointer to the
+     specific model-specific active alarm list."
+   ::= { alarmActiveEntry 14 }
+
+-- Active Alarm Variable Table --
+
+alarmActiveVariableTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF AlarmActiveVariableEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "A table of variables to go with active alarm entries."
+   ::= { alarmActive 3 }
+
+alarmActiveVariableEntry OBJECT-TYPE
+   SYNTAX      AlarmActiveVariableEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "Entries appear in this table when there are variables in
+       the varbind list of a corresponding alarm in
+       alarmActiveTable.
+
+       Entries appear in this table as though
+       the trap/notification had been transported using a
+       SNMPv2-Trap-PDU, as defined in [RFC3416] - i.e., the
+       alarmActiveVariableIndex 1 will always be sysUpTime
+       and alarmActiveVariableIndex 2 will always be
+       snmpTrapOID.
+
+       If the incoming notification is instead an SNMPv1 Trap-PDU and
+       the value of alarmModelVarbindIndex is 1 or 2, an appropriate
+       value for sysUpTime.0 or snmpTrapOID.0 shall be determined
+       by using the rules in section 3.1 of [RFC3584]."
+   INDEX   {  alarmListName, alarmActiveIndex,
+              alarmActiveVariableIndex }
+   ::= { alarmActiveVariableTable 1 }
+
+AlarmActiveVariableEntry ::= SEQUENCE {
+   alarmActiveVariableIndex                 Unsigned32,
+   alarmActiveVariableID                    OBJECT IDENTIFIER,
+   alarmActiveVariableValueType             INTEGER,
+   alarmActiveVariableCounter32Val          Counter32,
+   alarmActiveVariableUnsigned32Val         Unsigned32,
+   alarmActiveVariableTimeTicksVal          TimeTicks,
+   alarmActiveVariableInteger32Val          Integer32,
+   alarmActiveVariableOctetStringVal        OCTET STRING,
+   alarmActiveVariableIpAddressVal          IpAddress,
+   alarmActiveVariableOidVal                OBJECT IDENTIFIER,
+   alarmActiveVariableCounter64Val          Counter64,
+   alarmActiveVariableOpaqueVal             Opaque }
+
+alarmActiveVariableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+       "A strictly monotonically increasing integer, starting at
+       1 for a given alarmActiveIndex, for indexing variables
+       within the active alarm variable list. "
+   ::= { alarmActiveVariableEntry 1 }
+
+alarmActiveVariableID OBJECT-TYPE
+   SYNTAX     OBJECT IDENTIFIER
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+       "The alarm variable's object identifier."
+   ::= { alarmActiveVariableEntry 2 }
+
+alarmActiveVariableValueType OBJECT-TYPE
+   SYNTAX      INTEGER {
+         counter32(1),
+         unsigned32(2),
+         timeTicks(3),
+         integer32(4),
+         ipAddress(5),
+         octetString(6),
+         objectId(7),
+         counter64(8),
+         opaque(9)
+         }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The type of the value.  One and only one of the value
+       objects that follow is used for a given row in this table,
+       based on this type."
+   ::= { alarmActiveVariableEntry 3 }
+
+alarmActiveVariableCounter32Val OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'counter32'."
+   ::= { alarmActiveVariableEntry 4 }
+
+alarmActiveVariableUnsigned32Val OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'unsigned32'."
+   ::= { alarmActiveVariableEntry 5 }
+
+alarmActiveVariableTimeTicksVal OBJECT-TYPE
+   SYNTAX      TimeTicks
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'timeTicks'."
+   ::= { alarmActiveVariableEntry 6 }
+
+alarmActiveVariableInteger32Val OBJECT-TYPE
+   SYNTAX      Integer32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'integer32'."
+   ::= { alarmActiveVariableEntry 7 }
+
+alarmActiveVariableOctetStringVal OBJECT-TYPE
+   SYNTAX      OCTET STRING (SIZE(0..65535))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'octetString'."
+   ::= { alarmActiveVariableEntry 8 }
+
+alarmActiveVariableIpAddressVal OBJECT-TYPE
+   SYNTAX      IpAddress
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'ipAddress'."
+   ::= { alarmActiveVariableEntry 9 }
+
+alarmActiveVariableOidVal OBJECT-TYPE
+   SYNTAX      OBJECT IDENTIFIER
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'objectId'."
+   ::= { alarmActiveVariableEntry 10 }
+
+alarmActiveVariableCounter64Val OBJECT-TYPE
+   SYNTAX      Counter64
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'counter64'."
+   ::= { alarmActiveVariableEntry 11 }
+
+alarmActiveVariableOpaqueVal OBJECT-TYPE
+   SYNTAX      Opaque (SIZE(0..65535))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value when alarmActiveVariableType is 'opaque'.
+
+       Note that although RFC2578 [RFC2578] forbids the use
+       of Opaque in 'standard' MIB modules, this particular
+       usage is driven by the need to be able to accurately
+       represent any well-formed notification, and justified
+       by the need for backward compatibility."
+   ::= { alarmActiveVariableEntry 12 }
+
+-- Statistics --
+
+alarmActiveStatsTable  OBJECT-TYPE
+      SYNTAX  SEQUENCE OF AlarmActiveStatsEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "This table represents the alarm statistics
+         information."
+  ::= { alarmActive 4 }
+
+alarmActiveStatsEntry OBJECT-TYPE
+      SYNTAX  AlarmActiveStatsEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "Statistics on the current active alarms."
+      INDEX   { alarmListName }
+  ::= {  alarmActiveStatsTable 1 }
+
+AlarmActiveStatsEntry ::=
+      SEQUENCE {
+           alarmActiveStatsActiveCurrent  Gauge32,
+           alarmActiveStatsActives        ZeroBasedCounter32,
+           alarmActiveStatsLastRaise      TimeTicks,
+           alarmActiveStatsLastClear      TimeTicks
+                }
+
+alarmActiveStatsActiveCurrent OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS  current
+      DESCRIPTION
+         "The total number of currently active alarms on the system."
+       ::= { alarmActiveStatsEntry 1 }
+
+alarmActiveStatsActives OBJECT-TYPE
+      SYNTAX ZeroBasedCounter32
+      MAX-ACCESS read-only
+      STATUS  current
+      DESCRIPTION
+         "The total number of active alarms since system restarted."
+       ::= { alarmActiveStatsEntry 2 }
+
+alarmActiveStatsLastRaise  OBJECT-TYPE
+   SYNTAX      TimeTicks
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The value of sysUpTime at the time of the last
+       alarm raise for this alarm list.
+       If no alarm raises have occurred since the
+       last re-initialization of the local network management
+       subsystem, then this object contains a zero value."
+ ::= { alarmActiveStatsEntry 3 }
+
+alarmActiveStatsLastClear  OBJECT-TYPE
+   SYNTAX      TimeTicks
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The value of sysUpTime at the time of the last
+       alarm clear for this alarm list.
+       If no alarm clears have occurred since the
+       last re-initialization of the local network management
+       subsystem, then this object contains a zero value."
+ ::= { alarmActiveStatsEntry 4 }
+
+-- Alarm Clear
+
+alarmClearMaximum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+   "This object specifies the maximum number of cleared
+   alarms to store in the alarmClearTable.  When this
+   number is reached, the cleared alarms with the
+   earliest clear time will be removed from the table."
+ ::= { alarmClear 1 }
+
+alarmClearTable  OBJECT-TYPE
+      SYNTAX  SEQUENCE OF AlarmClearEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "This table contains information on
+         cleared alarms."
+  ::= { alarmClear 2 }
+
+alarmClearEntry OBJECT-TYPE
+      SYNTAX  AlarmClearEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "Information on a cleared alarm."
+      INDEX   { alarmListName, alarmClearDateAndTime,
+alarmClearIndex }
+  ::= {  alarmClearTable 1 }
+
+AlarmClearEntry ::=
+      SEQUENCE {
+   alarmClearIndex                 Unsigned32,
+   alarmClearDateAndTime           DateAndTime,
+   alarmClearEngineID              LocalSnmpEngineOrZeroLenStr,
+   alarmClearEngineAddressType     InetAddressType,
+   alarmClearEngineAddress         InetAddress,
+   alarmClearContextName           SnmpAdminString,
+   alarmClearNotificationID        OBJECT IDENTIFIER,
+   alarmClearResourceId            ResourceId,
+   alarmClearLogIndex              Unsigned32,
+   alarmClearModelPointer          RowPointer
+   }
+
+alarmClearIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+       "An integer which acts as the index of entries within
+
+       the named alarm list.  It wraps back to 1 after it
+       reaches its maximum value.
+
+       This object has the same value as the alarmActiveIndex that
+       this alarm instance had when it was active."
+   ::= { alarmClearEntry 1 }
+
+alarmClearDateAndTime OBJECT-TYPE
+   SYNTAX      DateAndTime
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "The local date and time when the alarm cleared.
+
+       This object facilitates retrieving all instances of
+       alarms that have been cleared since a given point in time.
+
+       Implementations MUST include the offset from UTC,
+       if available.  Implementation in environments in which
+       the UTC offset is not available is NOT RECOMMENDED."
+   ::= { alarmClearEntry 2 }
+
+alarmClearEngineID OBJECT-TYPE
+   SYNTAX      LocalSnmpEngineOrZeroLenStr
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The identification of the SNMP engine at which the alarm
+        originated.  If the alarm is from an SNMPv1 system this
+        object is a zero length string."
+   ::= { alarmClearEntry 3 }
+
+alarmClearEngineAddressType OBJECT-TYPE
+   SYNTAX      InetAddressType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+    "This object indicates what type of address is stored in
+    the alarmActiveEngineAddress object - IPv4, IPv6, DNS, etc."
+   ::= { alarmClearEntry 4 }
+
+alarmClearEngineAddress OBJECT-TYPE
+   SYNTAX      InetAddress
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+    "The Address of the SNMP engine on which the alarm was
+    occurring.  This is used to identify the source of an SNMPv1
+
+    trap, since an alarmActiveEngineId cannot be extracted from the
+    SNMPv1 trap PDU.
+
+    This object MUST always be instantiated, even if the list
+    can contain alarms from only one engine."
+   ::= { alarmClearEntry 5 }
+
+alarmClearContextName OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The name of the SNMP MIB context from which the alarm came.
+       For SNMPv1 traps this is the community string from the Trap.
+       Note that care needs to be taken when selecting community
+       strings to ensure that these can be represented as a
+       well-formed SnmpAdminString.  Community or Context names
+       that are not well-formed SnmpAdminStrings will be mapped
+       to zero length strings.
+
+       If the alarm's source SNMP engine is known not to support
+       multiple contexts, this object is a zero length string."
+   ::= { alarmClearEntry 6 }
+
+alarmClearNotificationID OBJECT-TYPE
+   SYNTAX      OBJECT IDENTIFIER
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The NOTIFICATION-TYPE object identifier of the alarm
+       clear."
+   ::= { alarmClearEntry 7 }
+
+alarmClearResourceId    OBJECT-TYPE
+   SYNTAX      ResourceId
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This object identifies the resource that was under alarm.
+
+      If there is no corresponding resource, then
+      the value of this object MUST be 0.0."
+   ::= { alarmClearEntry 8 }
+
+alarmClearLogIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (0..4294967295)
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+       "This number MUST be the same as the log index of the
+       applicable row in the notification log MIB, if it exists.
+       If no log index applies to the trap, then this object
+       MUST have the value of 0."
+   ::= { alarmClearEntry 9 }
+
+alarmClearModelPointer OBJECT-TYPE
+   SYNTAX     RowPointer
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+       "A pointer to the corresponding row in the
+       alarmModelTable for this cleared alarm."
+   ::= { alarmClearEntry 10 }
+
+-- Notifications
+
+alarmActiveState NOTIFICATION-TYPE
+ OBJECTS     { alarmActiveModelPointer,
+               alarmActiveResourceId }
+ STATUS      current
+ DESCRIPTION
+    "An instance of the alarm indicated by
+    alarmActiveModelPointer has been raised
+    against the entity indicated by
+    alarmActiveResourceId.
+
+    The agent must throttle the generation of
+    consecutive alarmActiveState traps so that there is at
+    least a two-second gap between traps of this
+    type against the same alarmActiveModelPointer and
+    alarmActiveResourceId.  When traps are throttled,
+    they are dropped, not queued for sending at a future time.
+
+    A management application should periodically check
+    the value of alarmActiveLastChanged to detect any
+    missed alarmActiveState notification-events, e.g.,
+    due to throttling or transmission loss."
+ ::= { alarmNotifications 2 }
+
+alarmClearState NOTIFICATION-TYPE
+   OBJECTS     { alarmActiveModelPointer,
+                 alarmActiveResourceId }
+   STATUS      current
+   DESCRIPTION
+     "An instance of the alarm indicated by
+     alarmActiveModelPointer has been cleared against
+
+     the entity indicated by alarmActiveResourceId.
+
+    The agent must throttle the generation of
+    consecutive alarmActiveClear traps so that there is at
+    least a two-second gap between traps of this
+    type against the same alarmActiveModelPointer and
+    alarmActiveResourceId.  When traps are throttled,
+    they are dropped, not queued for sending at a future time.
+
+    A management application should periodically check
+    the value of alarmActiveLastChanged to detect any
+    missed alarmClearState notification-events, e.g.,
+    due to throttling or transmission loss."
+   ::= { alarmNotifications 3 }
+
+-- Conformance
+
+alarmConformance OBJECT IDENTIFIER ::= { alarmMIB 2 }
+
+alarmCompliances OBJECT IDENTIFIER ::= { alarmConformance 1 }
+
+alarmCompliance MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+          "The compliance statement for systems supporting
+          the Alarm MIB."
+      MODULE -- this module
+          MANDATORY-GROUPS {
+           alarmActiveGroup,
+           alarmModelGroup
+          }
+      GROUP       alarmActiveStatsGroup
+       DESCRIPTION
+           "This group is optional."
+      GROUP       alarmClearGroup
+       DESCRIPTION
+           "This group is optional."
+      GROUP       alarmNotificationsGroup
+       DESCRIPTION
+           "This group is optional."
+   ::= { alarmCompliances 1 }
+
+alarmGroups OBJECT IDENTIFIER ::= { alarmConformance 2 }
+
+alarmModelGroup OBJECT-GROUP
+   OBJECTS {
+       alarmModelLastChanged,
+       alarmModelNotificationId,
+       alarmModelVarbindIndex,
+       alarmModelVarbindValue,
+       alarmModelDescription,
+       alarmModelSpecificPointer,
+       alarmModelVarbindSubtree,
+       alarmModelResourcePrefix,
+       alarmModelRowStatus
+      }
+    STATUS   current
+    DESCRIPTION
+               "Alarm model group."
+    ::= { alarmGroups 1}
+
+alarmActiveGroup OBJECT-GROUP
+        OBJECTS {
+           alarmActiveLastChanged,
+           alarmActiveOverflow,
+           alarmActiveEngineID,
+           alarmActiveEngineAddressType,
+           alarmActiveEngineAddress,
+           alarmActiveContextName,
+           alarmActiveVariables,
+           alarmActiveNotificationID,
+           alarmActiveResourceId,
+           alarmActiveDescription,
+           alarmActiveLogPointer,
+           alarmActiveModelPointer,
+           alarmActiveSpecificPointer,
+           alarmActiveVariableID,
+           alarmActiveVariableValueType,
+           alarmActiveVariableCounter32Val,
+           alarmActiveVariableUnsigned32Val,
+           alarmActiveVariableTimeTicksVal,
+           alarmActiveVariableInteger32Val,
+           alarmActiveVariableOctetStringVal,
+           alarmActiveVariableIpAddressVal,
+           alarmActiveVariableOidVal,
+           alarmActiveVariableCounter64Val,
+           alarmActiveVariableOpaqueVal
+          }
+          STATUS   current
+          DESCRIPTION
+               "Active Alarm list group."
+          ::= { alarmGroups 2}
+
+    alarmActiveStatsGroup  OBJECT-GROUP
+          OBJECTS  {
+                   alarmActiveStatsActives,
+                   alarmActiveStatsActiveCurrent,
+                   alarmActiveStatsLastRaise,
+                   alarmActiveStatsLastClear
+                    }
+          STATUS   current
+          DESCRIPTION
+               "Active alarm summary group."
+          ::= { alarmGroups 3}
+
+alarmClearGroup  OBJECT-GROUP
+          OBJECTS  {
+   alarmClearMaximum,
+   alarmClearEngineID,
+   alarmClearEngineAddressType,
+   alarmClearEngineAddress,
+   alarmClearContextName,
+   alarmClearNotificationID,
+   alarmClearResourceId,
+   alarmClearLogIndex,
+   alarmClearModelPointer
+                    }
+          STATUS   current
+          DESCRIPTION
+               "Cleared alarm group."
+          ::= { alarmGroups 4}
+
+alarmNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS { alarmActiveState, alarmClearState }
+   STATUS        current
+   DESCRIPTION
+           "The collection of notifications that can be used to
+           model alarms for faults lacking pre-existing
+           notification definitions."
+   ::= { alarmGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/APM-MIB.mib b/snmp_builder/mibs/APM-MIB.mib
new file mode 100644
index 0000000..279b7c6
--- /dev/null
+++ b/snmp_builder/mibs/APM-MIB.mib
@@ -0,0 +1,2127 @@
+APM-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    Counter32, Unsigned32                        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, TimeStamp,
+    TimeInterval, TruthValue, DateAndTime,
+    StorageType                                  FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                           FROM SNMPv2-CONF
+    SnmpAdminString                              FROM SNMP-FRAMEWORK-MIB
+    rmon, OwnerString                            FROM RMON-MIB
+    protocolDirLocalIndex                        FROM RMON2-MIB;
+
+--  Application Performance Measurement MIB
+
+apm MODULE-IDENTITY
+    LAST-UPDATED "200402190000Z"  -- February 19, 2004
+    ORGANIZATION "IETF RMON MIB Working Group"
+    CONTACT-INFO
+        "Author:
+                     Steve Waldbusser
+
+             Phone:  +1-650-948-6500
+             Fax :   +1-650-745-0671
+             Email:  waldbusser@nextbeacon.com
+
+         Working Group Chair:
+                     Andy Bierman
+                     Cisco Systems, Inc.
+             Postal: 170 West Tasman Drive
+                     San Jose, CA USA 95134
+                Tel: +1 408 527-3711
+             E-mail: abierman@cisco.com
+
+         Working Group Mailing List: <rmonmib@ietf.org>
+         To subscribe send email to: <rmonmib-request@ietf.org>
+        "
+    DESCRIPTION
+        "The MIB module for measuring application performance
+        as experienced by end-users.
+
+        Copyright (C) The Internet Society (2004). This version of
+        this MIB module is part of RFC 3729; see the RFC itself for
+        full legal notices."
+
+    REVISION "200402190000Z"    -- February 19, 2004
+    DESCRIPTION
+        "The original version of this MIB Module, published as
+        RFC3729."
+    ::= { rmon 23 }
+
+apmMibObjects OBJECT IDENTIFIER ::= { apm 1 }
+apmConformance OBJECT IDENTIFIER ::= { apm 2 }
+apmCompliances    OBJECT IDENTIFIER ::= { apmConformance 1 }
+apmGroups         OBJECT IDENTIFIER ::= { apmConformance 2 }
+
+AppLocalIndex ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "A locally arbitrary unique identifier associated with an
+        application or application verb.
+
+        All objects of type AppLocalIndex are assigned by the agent
+        out of a common number space. In other words, AppLocalIndex
+        values assigned to entries in one table must not overlap with
+        AppLocalIndex values assigned to entries in another
+        table. Further, every protocolDirLocalIndex value registered
+        by the agent automatically assigns the same value out of the
+
+        AppLocalIndex number space.
+
+        For example, if the protocolDirLocalIndex values { 1, 3, 5, 7 }
+        have been assigned, and the apmHttpFilterAppLocalIndex values
+        { 6, 8, 9 } have been assigned:
+
+            - Assignment of new AppLocalIndex values must not use the
+              values { 1, 3, 5, 6, 7, 8, 9 }.
+            - AppLocalIndex values { 1, 3, 5, 7 } are automatically
+              assigned and are associated with the identical value of
+              protocolDirLocalIndex. In particular, an entry in the
+              apmAppDirTable indexed by a value provides further
+              information about a protocol indexed by the same value
+              in the protocolDirTable of RMON2.
+
+        The value for each supported application must remain constant
+        at least from one re-initialization of the entity's network
+        management system to the next re-initialization, except that
+        if an application is deleted and re-created, it must be
+        re-created with a new value that has not been used since the
+        last re-initialization.
+
+        The specific value is meaningful only within a given SNMP
+        entity. An AppLocalIndex value must not be re-used until the
+        next agent restart."
+    SYNTAX       Unsigned32 (1..2147483647)
+
+ProtocolDirNetworkAddress ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "A network level address whose semantics and encoding are
+        specified by an associated protocolDirLocalIndex
+        value. Objects of this type must specify which
+        protocolDirLocalIndex value is used. This value is encoded
+        according to the encoding rules for the identified
+        protocolDirectory entry.
+
+        For example, if the associated protocolDirLocalIndex indicates
+        an encapsulation of ip, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the ip address,
+        in network byte order.
+
+        Objects of this type may allow this value to be the zero
+        length string. If so, they must identify they meaning of this
+        value."
+    SYNTAX        OCTET STRING (SIZE(0..255))
+
+DataSourceOrZero ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "Identifies the source of the data that the associated
+        function is configured to analyze. This source can be any
+        interface on this device.
+
+        In order to identify a particular interface, this
+        object shall identify the instance of the ifIndex
+        object, defined in [4], for the desired interface.
+
+        For example, if an entry were to receive data from
+        interface #1, this object would be set to ifIndex.1.
+
+        If the source of the data isn't an interface or cannot be
+        localized to an interface, this object would be set to 0.0"
+    REFERENCE    "The DataSource textual convention is defined in
+                 RFC 2021 [5]."
+    SYNTAX       OBJECT IDENTIFIER
+
+RmonClientID ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+         "A long-lived unique ID assigned to an end-system. This ID is
+         assigned by the agent using an implementation-specific
+         algorithm.
+
+         Because a client machine may be assigned multiple addresses
+         over any time period it can be difficult to attribute
+         behavior to a particular client based solely on its
+         address. A ClientID may be assigned to provide a more
+         stable handle for referencing that client. The entity that
+         assigns the ClientID may use various implementation
+         techniques to keep track of a client but if the assigning
+         entity is unable to track client address mappings, it may map
+         client identifiers to client addresses rather than to
+         distinct client machines.
+
+         This is named ClientID because it helps to solve a problem
+         seen in network clients (servers usually have well-known,
+         long-lived addresses). However, ClientID's may be assigned to
+         any end-system regardless of its role on the network."
+    SYNTAX      Unsigned32 (0..4294967295)
+
+TransactionAggregationType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Specifies one of 4 different techniques for aggregating
+        transactions.
+
+        The metrics for a single transaction are the responsiveness of
+        the transaction and whether the transaction succeeded (a
+        boolean). When such metrics are aggregated in this MIB Module,
+        these metrics are replaced by averages and distributions of
+        responsiveness and availability. The metrics describing
+        aggregates are constant no matter which type of aggregation is
+        being performed. These metrics may be found in the
+        apmReportTable.
+
+        The flows(1) aggregation is the simplest. All transactions
+        that share common application/server/client 3-tuples are
+        aggregated together, resulting in a set of metrics for all
+        such unique 3-tuples.
+
+        The clients(2) aggregation results in somewhat more
+        aggregation (i.e., fewer resulting records). All transactions
+        that share common application/client tuples are aggregated
+        together, resulting in a set of metrics for all such unique
+        tuples.
+
+        The servers(3) aggregation usually results in still more
+        aggregation (i.e., fewer resulting records). All transactions
+        that share common application/server tuples are aggregated
+        together, resulting in a set of metrics for all such unique
+        tuples.
+
+        The applications(4) aggregation results in the most
+        aggregation (i.e., the fewest resulting records). All
+        transactions that share a common application are aggregated
+        together, resulting in a set of metrics for all such unique
+        applications.
+
+        Note that it is not meaningful to aggregate applications, as
+        different applications have widely varying characteristics. As a
+        result, this set of aggregations is complete."
+    SYNTAX      INTEGER {
+                  flows(1),    -- Least Aggregation
+                  clients(2),
+                  servers(3),
+                  applications(4) -- Most Aggregation
+                }
+
+-- The APM Application Directory Group
+
+-- The Application Directory Table contains a record for every
+
+-- application monitored by this agent. This table is also used to
+-- configure whether or not an application will be measured and which
+-- bucket boundaries will be used for the application.
+--
+-- The bucket boundaries define the break-points between bins of a
+-- histogram analysis for that application. As an example of how this
+-- works, consider an entry representing response-time for http.
+-- If the boundaries are set as follows:
+-- Boundary1: 500 milliseconds
+-- Boundary2: 1 second
+-- Boundary3: 2 seconds
+-- Boundary4: 5
+-- Boundary5: 15
+-- Boundary6: 60
+--
+-- If the following measurements are made (all in milliseconds):
+-- 377, 8645, 1300, 487, 1405, 775, 1115, 850, 945, 1054, 7745, 9380
+--
+-- A report run during this interval would report the following
+-- counts:
+-- Bucket1: 2
+-- Bucket2: 3
+-- Bucket3: 4
+-- Bucket4: 0
+-- Bucket5: 3
+-- Bucket6: 0
+-- Bucket7: 0
+
+apmAppDirTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmAppDirEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The APM MIB directory of applications and application
+        verbs. The agent will populate this table with all
+        applications/verbs of any responsivenessType it has the
+        capability to monitor. Since the agent populates this table
+        with every entry it has the capability to monitor, the
+        entries in this table are read-write, allowing the management
+        station to modify parameters in this table but not to add new
+        entries or delete entries (however, entries may be
+        disabled). If new entries are added to the apmHttpFilterTable
+        or the apmUserDefinedAppTable, the agent will add the
+        corresponding entries to this table.
+
+        It is an implementation-dependent matter as to how the agent
+        sets these default parameters. For example, it may leave
+        certain entries in this table 'off(0)' if the agent developer
+
+        believes that combination will be infrequently used, allowing
+        a manager that needs that capability to set it to 'on(1)'.
+
+        Some applications are registered in the RMON2 protocol
+        directory and some are registered in other tables in this
+        MIB Module. Regardless of where an application is originally
+        registered, it is assigned an AppLocalIndex value that is the
+        primary index for this table.
+
+        The contents of this table affect all reports and exceptions
+        generated by this agent. Accordingly, modification of this
+        table should be performed by a manager acting in the role of
+        administrator. In particular, management software should not
+        require or enforce particular configuration of this table - it
+        should reflect the preferences of the site administrator, not
+        the software author. As a practical matter, this requires
+        management software to allow the administrator to configure
+        the values it will use so that it can be adapted to the site
+        policy."
+    ::= { apmMibObjects 1 }
+
+apmAppDirEntry OBJECT-TYPE
+    SYNTAX      ApmAppDirEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The APM MIB directory of applications and application
+        verbs. An entry will exist in this table for all applications
+        for which application performance measurement is supported."
+    INDEX { apmAppDirAppLocalIndex,
+            apmAppDirResponsivenessType }
+    ::= { apmAppDirTable 1 }
+
+ApmAppDirEntry ::= SEQUENCE {
+    apmAppDirAppLocalIndex            AppLocalIndex,
+    apmAppDirResponsivenessType       INTEGER,
+    apmAppDirConfig                   INTEGER,
+    apmAppDirResponsivenessBoundary1  Unsigned32,
+    apmAppDirResponsivenessBoundary2  Unsigned32,
+    apmAppDirResponsivenessBoundary3  Unsigned32,
+    apmAppDirResponsivenessBoundary4  Unsigned32,
+    apmAppDirResponsivenessBoundary5  Unsigned32,
+    apmAppDirResponsivenessBoundary6  Unsigned32
+}
+
+apmAppDirAppLocalIndex OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The AppLocalIndex assigned for this application Directory
+        entry."
+    ::= { apmAppDirEntry 1 }
+
+apmAppDirResponsivenessType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  transactionOriented(1),
+                  throughputOriented(2),
+                  streamingOriented(3)
+                }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This object describes and configures the agent's support for
+        application performance measurement for this application.
+        There are 3 types of measurements for different types of
+        applications:
+
+        Transaction-Oriented applications have a fairly constant
+        workload to perform for all transactions. The responsiveness
+        metric for transaction-oriented applications is application
+        response time (from first request to final delivery of
+        service) and is measured in milliseconds. This is
+        commonly referred to as end-user response time.
+
+        Throughput-Oriented applications have widely varying workloads
+        based on the nature of the client request. In particular,
+        throughput-oriented applications vary widely in the amount of
+        data that must be transported to satisfy the request. The
+        responsiveness metric for throughput-oriented applications is
+        kilobits per second.
+
+        Streaming-Oriented applications deliver data at a constant
+        metered rate of speed regardless of the responsiveness of the
+        networking and computing infrastructure. This constant rate of
+        speed is generally specified to be below (sometimes well
+        below) the nominal capability of the infrastructure. However,
+        when the infrastructures cannot deliver data at this speed,
+        interruption of service or degradation of service can
+        result. The responsiveness metric for streaming-oriented
+        applications is the ratio of time that the service is degraded
+        or interrupted to the total service time. This metric is
+        measured in parts per million.
+
+        Note that for some applications, measuring more than one
+        responsiveness type may be interesting. For agents that wish
+
+        to support more than one measurement for a application, they
+        will populate this table with multiple entries for that
+        application, one for each type."
+    ::= { apmAppDirEntry 2 }
+
+apmAppDirConfig OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  off(1),
+                  on(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object describes and configures support for application
+        performance measurement for this application.
+
+        If the value of this object is on(2), the agent supports
+        measurement of application performance metrics for this
+        application and is configured to measure such metrics for all
+        APM MIB functions and all interfaces.  If the value of this
+        object is off(1), the agent supports measurement of
+        application performance for this application but is configured
+        to not measure these metrics for any APM MIB functions or
+        interfaces.  Whenever this value changes from on(2) to off(1),
+        the agent shall delete all related entries in all tables in
+        this MIB Module.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 3 }
+
+apmAppDirResponsivenessBoundary1 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The boundary value between bucket1 and bucket 2. If this
+        value is modified, all entries in the apmReportTable must be
+        deleted by the agent.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 4 }
+
+apmAppDirResponsivenessBoundary2 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The boundary value between bucket2 and bucket 3. If this
+
+        value is modified, all entries in the apmReportTable must be
+        deleted by the agent.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 5 }
+
+apmAppDirResponsivenessBoundary3 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The boundary value between bucket3 and bucket 4. If this
+        value is modified, all entries in the apmReportTable must be
+        deleted by the agent.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 6 }
+
+apmAppDirResponsivenessBoundary4 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The boundary value between bucket4 and bucket 5. If this
+        value is modified, all entries in the apmReportTable must be
+        deleted by the agent.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 7 }
+
+apmAppDirResponsivenessBoundary5 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The boundary value between bucket5 and bucket 6. If this
+        value is modified, all entries in the apmReportTable must be
+        deleted by the agent.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 8 }
+
+apmAppDirResponsivenessBoundary6 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The boundary value between bucket6 and bucket 7. If this
+
+        value is modified, all entries in the apmReportTable must be
+        deleted by the agent.
+
+        The value of this object must persist across reboots."
+    ::= { apmAppDirEntry 9 }
+
+-- Scalars related to the Application Directory table
+
+apmBucketBoundaryLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime the last time that any bucket boundary
+        in any appDirEntry was changed. This object can help to
+        determine if two managers are both trying to enforce different
+        configurations of this table."
+    ::= { apmMibObjects 2 }
+
+apmAppDirID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object allows managers to avoid downloading application
+        directory information when the directory is set to a known
+        (usually fixed) configuration.
+
+        If the value of this object isn't 0.0, it signifies
+        that the entire contents of the apmAppDirTable,
+        apmHttpFilterTable, apmUserDefinedAppTable and
+        protocolDirTable are equal to a known state identified
+        by the value of this object. If a manager recognizes this
+        value as identifying a directory configuration it has a local
+        copy of, it may use this local copy rather than downloading
+        these tables. Note that it may have downloaded this local copy
+        (and the ID) from another agent and used this copy for all
+        other agents that advertised the same ID.
+
+        If an agent recognizes that the entire contents of the
+        apmAppDirTable, apmHttpFilterTable,
+        apmUserDefinedAppTable and protocolDirTable are equal to
+        a known state to which an ID has been assigned, it should set
+        this object to that ID.
+
+        In many cases when this feature is used, the application
+        directory information will be in read-only memory and thus the
+        tables may not be modified via SNMP requests. In the event
+
+        that the tables are writable and a modification is made, the
+        agent is responsible for setting this object to 0.0 if it
+        cannot determine that the state is equal to a known state.
+
+        An agent is not obligated to recognize and advertise all such
+        registered states as it may not have knowledge of all states.
+        Thus, a manager may encounter agents whose DirectoryID value
+        is 0.0 even though the contents of the directory were equal to
+        a registered state.
+
+        Note that the contents of those tables includes the
+        protocolDirLocalIndex and appLocalIndex values. In other
+        words, these values can't be assigned randomly on each agent,
+        but must be equal to values that are part of the known
+        state. While it is possible for a manager to download
+        application directory details using SNMP and to set the
+        appropriate directoryID, the manager would need to have some
+        scheme to ensure consistent values of LocalIndex variables
+        from agent to agent. Such schemes are outside the scope of
+        this specification.
+
+        Application directory registrations are unique within an
+        administrative domain.
+
+        Typically these registrations will be made by an agent
+        software developer who will set the application directory
+        tables to a read-only state and assign a DirectoryID to that
+        state. Thus, all agents running this software would share the
+        same DirectoryID. As the application directory might change
+        from one software release to the next, the developer may
+        register different DirectoryID's for each software release.
+
+        A customer could also create a site-wide application directory
+        configuration and assign a DirectoryID to that configuration
+        as long as consistent values of LocalIndex variables can be
+        ensured.
+
+        The value of this object must persist across reboots."
+     ::= { apmMibObjects 3 }
+
+-- APM HTTP Filter Table
+
+-- The HTTP Filter Table creates virtual applications which measure the
+-- performance of certain web pages  or sets of web pages. Some
+-- circumstances where this is particularly useful are:
+--
+--      - An Intranet or ASP scenario where a business application is
+--        running on one or more web pages or scripts.
+
+--        (i.e., /expense/submit.cgi?employeeID=3426&...)
+--      - A web-hosting scenario where one wants to measure the
+--        service level for a particular customer
+--      - An e-commerce scenario where the performance of certain
+--        pages needs to be monitored more closely.
+--        (i.e., shopping cart, shipping, credit card authorization)
+
+apmHttpFilterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmHttpFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that creates virtual applications which measure the
+        performance of certain web pages or sets of web pages.
+
+        When an entry is added to this table, the agent will
+        automatically create one or more entries in the
+        apmAppDirTable (one for each responsivenessType it is
+        capable of measuring).
+
+        Note that when entries exist in this table some HTTP
+        transactions will be summarized twice: in applications
+        represented here as well as the HTTP application. If entries
+        in this table overlap, these transactions may be summarized
+        additional times.
+
+        The contents of this table affect all reports and exceptions
+        generated by this agent. Accordingly, modification of this
+        table should be performed by a manager acting in the role of
+        administrator. In particular, management software should not
+        require or enforce particular configuration of this table - it
+        should reflect the preferences of the site administrator, not
+        the software author."
+    ::= { apmMibObjects 4 }
+
+apmHttpFilterEntry OBJECT-TYPE
+    SYNTAX      ApmHttpFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A virtual application which measure the performance of certain
+        web pages or sets of web pages."
+    INDEX { apmHttpFilterIndex }
+    ::= { apmHttpFilterTable 1 }
+
+ApmHttpFilterEntry ::= SEQUENCE {
+    apmHttpFilterIndex              Unsigned32,
+    apmHttpFilterAppLocalIndex      AppLocalIndex,
+    apmHttpFilterServerProtocol     Unsigned32,
+    apmHttpFilterServerAddress      ProtocolDirNetworkAddress,
+    apmHttpFilterURLPath            OCTET STRING,
+    apmHttpFilterMatchType          INTEGER,
+    apmHttpFilterOwner              OwnerString,
+    apmHttpFilterStorageType        StorageType,
+    apmHttpFilterRowStatus          RowStatus
+}
+
+apmHttpFilterIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        apmHttpFilterTable."
+    ::= { apmHttpFilterEntry 1 }
+
+apmHttpFilterAppLocalIndex OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The AppLocalIndex that represents HTTP transactions
+        that match this entry.
+
+        This object is read-only. A value is created by the agent from
+        an unused AppLocalIndex value when this apmHttpFilterEntry is
+        created."
+    ::= { apmHttpFilterEntry 2 }
+
+apmHttpFilterServerProtocol OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The protocolDirLocalIndex value of the network level protocol
+        of the apmHttpFilterServerAddress."
+    ::= { apmHttpFilterEntry 3 }
+
+apmHttpFilterServerAddress OBJECT-TYPE
+    SYNTAX      ProtocolDirNetworkAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This entry will only represent transactions coming from the
+        network address specified in this object.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated apmHttpFilterServerProtocol object.
+
+        If this object is the zero-length string, then this entry will
+        match one of the addresses represented by the 'host' component
+        of the associated apmHttpFilterURLPath object, where the
+        format if a URL [9] is
+        http://<host>:<port>/<path>?<searchpart>."
+    ::= { apmHttpFilterEntry 4 }
+
+apmHttpFilterURLPath OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..65535))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This entry will only represent HTTP transactions
+        where the URL path component in the request matches this
+        value. This value represents the requested path regardless of
+        any substitution that the server might perform.
+
+        Prior to the matching, the URL is stripped of any server
+        address or DNS name and consists solely of the path name on
+        that server.
+
+        If the length of this object is zero, then this entry will
+        match if the associated apmHttpFilterServerAddress match. If
+        the length of that object is also zero, then this entry will
+        match nothing.
+
+        The value of the associated apmHttpFilterMatchType dictates
+        the type of matching that will be attempted."
+    ::= { apmHttpFilterEntry 5 }
+
+apmHttpFilterMatchType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    exact(1),
+                    stripTrailingSlash(2),
+                    prefix(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The matching algorithm used to compare the URL pathname.
+
+        If the value is exact(1), then the pathname component will be
+        compared with the associated apmHttpFilterURLPath and
+        will only be associated with this entry if it matches exactly.
+
+        If the value is stripTrailingSlash(2), then the pathname
+        component will be compared with the associated
+        apmHttpFilterURLPath and will only be associated with this
+        entry if it matches exactly or if the pathname ends with a '/'
+        symbol and matches apmHttpFilterURLPath if the '/' symbol is
+        removed from the pathname. This option exists for those paths
+        where an optional trailing slash is possible but for which a
+        prefix match would be too broad.
+
+        If the value is prefix(3), then the pathname component will be
+        compared with the associated apmHttpFilterURLPath and will
+        only be associated with this entry if the beginning of the
+        pathname matches every octet of this value. Octets that extend
+        beyond the length of this value are ignored."
+    ::= { apmHttpFilterEntry 6 }
+
+apmHttpFilterOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { apmHttpFilterEntry 7 }
+
+apmHttpFilterStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this apmHttpFilterEntry. If the value of
+        this object is 'permanent', no objects in this row need to be
+        writable."
+    ::= { apmHttpFilterEntry 8 }
+
+apmHttpFilterRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this apmHttpFilterEntry. No objects in this row
+        may be modified while the row's status is 'active'."
+    ::= { apmHttpFilterEntry 9 }
+
+apmHttpIgnoreUnregisteredURLs OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When true, APM measurements of HTTP transactions will only
+        measure transactions relating to URLs that match a filter in
+        the apmHttpFilterTable. Thus, measurements for the HTTP
+        application will present aggregated statistics for
+        URL-matching HTTP transactions and measurements for the HTTP
+        GET application verb will present aggregated statistics for
+        URL-matching HTTP GET transactions.
+
+        This will be used in environments that wish to monitor only
+        targeted URLs and to ignore large volumes of internet web
+        browsing traffic.
+
+        This object affects all APM reports and exceptions generated
+        by this agent. Accordingly, modification of this object should
+        be performed by a manager acting in the role of
+        administrator. In particular, management software should not
+        require or enforce particular configuration of this object -
+        it should reflect the preferences of the site administrator,
+        not the software author.
+
+        The value of this object must persist across reboots."
+    ::= { apmMibObjects 5 }
+
+apmHttp4xxIsFailure OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When true, this agent will recognize HTTP errors in the range
+        of 400 through 499 and will treat them as unavailable
+        transactions. When false or when this object isn't supported,
+        they will be treated as successful transactions.
+
+        This object allows such error pages to be tracked at the
+        possible expense of having user typos treated as poor service
+        on the part of the web server.
+
+        This object affects all reports and exceptions generated by
+        this agent. Accordingly, modification of this object should be
+        performed by a manager acting in the role of administrator. In
+        particular, management software should not require or enforce
+        particular configuration of this object - it should reflect
+        the preferences of the site administrator, not the software
+        author.
+
+        The value of this object must persist across reboots."
+    ::= { apmMibObjects 6 }
+
+-- The APM User-Defined Application Table
+
+-- Many application protocols will never be registered with a
+-- standards body (and thus included in a protocol directory standard)
+-- because they are custom, in-house or proprietary
+-- applications. Nevertheless, implementation strategies exist for
+-- monitoring the end-user experience of these applications.
+--
+-- This read-only table provides a means for the agent to advertise
+-- which user-defined applications it is monitoring and to associate
+-- each with an AppLocalIndex value. It is an implementation-dependent
+-- matter as to how the agent learns how to monitor these
+-- applications.
+
+apmUserDefinedAppTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmUserDefinedAppEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that advertises user-defined applications that the
+        agent is measuring.
+
+        The agent will automatically create one or more entries in the
+        apmAppDirTable (one for each responsivenessType it is
+        capable of measuring) for each entry in this table.
+
+        Note that when entries exist in this table some
+        transactions can be summarized more than once if there is
+        overlap between applications defined here and applications
+        defined in the protocol directory or in the httpFilter table."
+    ::= { apmMibObjects 7 }
+
+apmUserDefinedAppEntry OBJECT-TYPE
+    SYNTAX      ApmUserDefinedAppEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A user-defined application that the agent is measuring, along
+        with its AppLocalIndex assignment.
+
+        The apmAppDirAppLocalIndex value in the index identifies
+        the agent-assigned AppLocalIndex value for this user-defined
+        application."
+    INDEX { apmAppDirAppLocalIndex }
+    ::= { apmUserDefinedAppTable 1 }
+
+ApmUserDefinedAppEntry ::= SEQUENCE {
+    apmUserDefinedAppParentIndex    Unsigned32,
+    apmUserDefinedAppApplication    SnmpAdminString
+}
+
+apmUserDefinedAppParentIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocolDirLocalIndex value of the highest-layer
+        protocol defined in the protocolDirTable that this
+        application is a child of."
+    ::= { apmUserDefinedAppEntry 1 }
+
+apmUserDefinedAppApplication OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A human readable descriptive tag for this application."
+    ::= { apmUserDefinedAppEntry 2 }
+
+-- The APM Name Table
+
+apmNameTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmNameEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A client machine may have multiple addresses during a period
+        of monitoring. The apmNameTable assigns a long-lived
+        identifier to a client and records what addresses were
+        assigned to that client for periods of time. Various
+        implementation techniques exist for tracking this mapping but
+        if an agent is unable to track client address mappings, it may
+        map client identifiers to client addresses rather than to
+        distinct client machines.
+
+        A particular apmNameClientID should be a constant attribute of
+        a particular client. When available, the agent may also record
+        the machine name and/or user name which may be valuable for
+        displaying to humans. The apmNameMachineName and
+        apmNameUserName are relatively constant, changing only if
+        these attributes actually change on the client.
+
+        The agent will store a historical log of these entries, aging
+        out old entries as the log becomes too large. Since this table
+        contains information vital to the interpretation of other
+        tables (e.g., the apmReportTable), the agent should ensure that
+
+        the log doesn't age out entries that would be referenced by
+        data in those tables.
+
+        Note that an entry for a clientID is active from its
+        StartTime until the StartTime of another entry (for the same
+        clientID) that supersedes it, or 'now' if none supersede
+        it. Therefore, if a clientID only has a single entry, it is by
+        definition very new and should never be aged out. No entry for
+        a clientID should be aged out unless it has been updated by a
+        new entry for the client (i.e., with an updated address) and
+        only if the new entry is 'old' enough.
+
+        To determine how old is old enough, compute the maximum value
+        of Interval * (NumReports + 1) of all entries in the
+        apmReportControlTable (the '+ 1' is to allow a reasonable
+        period of time for the report to be downloaded). Then take the
+        larger of this value and the age in seconds of the oldest
+        entry in the current transaction table. If an entry for a
+        clientID is superseded by another entry whose StartTime is
+        more than this many seconds ago, then the older entry may be
+        deleted."
+    ::= { apmMibObjects 8 }
+
+apmNameEntry OBJECT-TYPE
+    SYNTAX      ApmNameEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the APM name table. An entry exists for each
+        period of time that a client has been associated with a
+        particular address.
+
+        The protocolDirLocalIndex value in the index identifies
+        the network layer protocol for the ClientAddress for this
+        entry.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length which exceeds
+        the maximum for the SNMP protocol. Implementations should take
+        care to avoid such combinations."
+    INDEX { apmNameClientID,
+            protocolDirLocalIndex, apmNameClientAddress,
+            apmNameMappingStartTime }
+    ::= { apmNameTable 1 }
+
+ApmNameEntry ::= SEQUENCE {
+    apmNameClientID                  RmonClientID,
+    apmNameClientAddress             ProtocolDirNetworkAddress,
+    apmNameMappingStartTime          DateAndTime,
+    apmNameMachineName               SnmpAdminString,
+    apmNameUserName                  SnmpAdminString
+}
+
+apmNameClientID OBJECT-TYPE
+    SYNTAX      RmonClientID
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A unique ID assigned to the machine represented by this
+         mapping. This ID is assigned by the agent using an
+         implementation-specific algorithm."
+    ::= { apmNameEntry 1 }
+
+apmNameClientAddress OBJECT-TYPE
+    SYNTAX      ProtocolDirNetworkAddress (SIZE(1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network client address for this client when this mapping
+        was active.
+
+        This is represented as an octet string with specific semantics
+        and length as identified by the protocolDirLocalIndex
+        component of the index. This object may not be the zero length
+        string.
+
+        Since this object is an index variable, it is encoded in the
+        index according to the index encoding rules.  For example, if
+        the protocolDirLocalIndex component of the index indicates an
+        encapsulation of ip, this object is encoded as a length octet
+        of 4, followed by the 4 octets of the ip address, in network
+        byte order. Care should be taken to avoid values of this
+        object that, in conjunction with the other index variables,
+        would result in an index longer than SNMP's maximum of 128
+        subidentifiers."
+    ::= { apmNameEntry 2 }
+
+apmNameMappingStartTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The time that the agent first discovered this mapping
+        as active."
+    ::= { apmNameEntry 3 }
+
+apmNameMachineName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The human readable name of the client machine.
+
+        If the client has no machine name or the agent is
+        unable to learn the machine name, this object will be
+        a zero-length string."
+    ::= { apmNameEntry 4 }
+
+apmNameUserName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The human readable name of a human user using the client
+        machine. If more than one user name are available
+        simultaneously, it is an implementation-dependent matter as to
+        which is used here. However, if the user name changes, this
+        object should change to reflect that change.
+
+        Non-human user names like 'root' or 'administrator' aren't
+        intended as values for this object. If the client has no
+        recorded user name or the agent is unable to learn a user
+        name, this object will be a zero-length string."
+    ::= { apmNameEntry 5 }
+
+-- The APM Report Group
+
+apmReportControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmReportControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Parameters that control the creation of a set of reports that
+        aggregate application performance."
+    ::= { apmMibObjects 9 }
+
+apmReportControlEntry OBJECT-TYPE
+    SYNTAX      ApmReportControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apmReportControlTable.
+
+        An example of the indexing of this table is
+
+        apmReportControlInterval.3"
+    INDEX { apmReportControlIndex }
+    ::= { apmReportControlTable 1 }
+
+ApmReportControlEntry ::= SEQUENCE {
+    apmReportControlIndex            Unsigned32,
+    apmReportControlDataSource       DataSourceOrZero,
+    apmReportControlAggregationType  TransactionAggregationType,
+    apmReportControlInterval         Unsigned32,
+    apmReportControlRequestedSize    Unsigned32,
+    apmReportControlGrantedSize      Unsigned32,
+    apmReportControlRequestedReports Unsigned32,
+    apmReportControlGrantedReports   Unsigned32,
+    apmReportControlStartTime        TimeStamp,
+    apmReportControlReportNumber     Unsigned32,
+    apmReportControlDeniedInserts    Counter32,
+    apmReportControlDroppedFrames    Counter32,
+    apmReportControlOwner            OwnerString,
+    apmReportControlStorageType      StorageType,
+    apmReportControlStatus           RowStatus
+}
+
+apmReportControlIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        apmReportControlTable.  Each such entry defines a unique
+        report whose results are placed in the apmReportTable on
+        behalf of this apmReportControlEntry."
+    ::= { apmReportControlEntry 1 }
+
+apmReportControlDataSource OBJECT-TYPE
+    SYNTAX      DataSourceOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of the data for APM Reports generated on
+        behalf of this apmReportControlEntry.
+
+        If the measurement is being performed by a probe, this should
+        be set to interface or port where data was received for
+        analysis. If the measurement isn't being performed by a probe,
+        this should be set to the primary interface over which the
+        measurement is being performed. If the measurement isn't being
+        performed by a probe and there is no primary interface or this
+
+        information isn't known, this object should be set to 0.0.
+
+        This object may not be modified if the associated
+        apmReportControlStatus object is equal to active(1)."
+    ::= { apmReportControlEntry 2 }
+
+apmReportControlAggregationType OBJECT-TYPE
+    SYNTAX      TransactionAggregationType
+            --    INTEGER {
+            --      flows(1),
+            --      clients(2),
+            --      servers(3),
+            --      applications(4)
+            --    }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of aggregation being performed for this set of
+        reports.
+
+        The metrics for a single transaction are the responsiveness of
+        the transaction and whether the transaction succeeded (a
+        boolean). When such metrics are aggregated in this MIB Module,
+        these metrics are replaced by averages and distributions of
+        responsiveness and availability. The metrics describing
+        aggregates are constant no matter which type of aggregation is
+        being performed. These metrics may be found in the
+        apmReportTable.
+
+        The flows(1) aggregation is the simplest. All transactions
+        that share common application/server/client 3-tuples are
+        aggregated together, resulting in a set of metrics for all
+        such unique 3-tuples.
+
+        The clients(2) aggregation results in somewhat more
+        aggregation (i.e., fewer resulting records). All transactions
+        that share common application/client tuples are aggregated
+        together, resulting in a set of metrics for all such unique
+        tuples.
+
+        The servers(3) aggregation usually results in still more
+        aggregation (i.e., fewer resulting records). All transactions
+        that share common application/server tuples are aggregated
+        together, resulting in a set of metrics for all such unique
+        tuples.
+
+        The applications(4) aggregation results in the most
+        aggregation (i.e., the fewest resulting records). All
+
+        transactions that share a common application are aggregated
+        together, resulting in a set of metrics for all such unique
+        applications.
+
+        Note that it is not meaningful to aggregate applications, as
+        different applications have widely varying characteristics.
+        As a result, this set of aggregations is complete.
+
+        This object may not be modified if the associated
+        apmReportControlStatus object is equal to active(1)."
+    ::= { apmReportControlEntry 3 }
+
+apmReportControlInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The interval in seconds over which data is accumulated before
+        being aggregated into a report in the apmReportTable.  All
+        reports with the same apmReportControlIndex will be based on
+        the same interval. This object must be greater than zero.
+
+        Many users desire that these reports be synchronized to within
+        seconds of the beginning of the hour because the results may
+        be correlated more meaningfully to business behavior and so
+        that data from multiple agents is aggregated over the same
+        time periods. Thus management software may take extra effort
+        to synchronize reports to the beginning of the hour and to one
+        another. However, the agent must not allow reports to 'drift'
+        over time as they will quickly become unsynchronized. In
+        particular, if there is any fixed processing delay between
+        reports, the reports should deduct this time from the interval
+        so that reports don't drift.
+
+        This object may not be modified if the associated
+        apmReportControlStatus object is equal to active(1)."
+    DEFVAL { 3600 }
+    ::= { apmReportControlEntry 4 }
+
+apmReportControlRequestedSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of entries requested to be allocated for each
+        report generated on behalf of this entry."
+    ::= { apmReportControlEntry 5 }
+
+apmReportControlGrantedSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of entries per report the agent has allocated
+        based on the requested amount in apmReportControlRequestedSize.
+        Since multiple reports are saved, the total number of entries
+        allocated will be this number multiplied by the value of
+        apmReportControlGrantedReports, or 1 if that object doesn't
+        exist.
+
+        When the associated apmReportControlRequestedSize object is
+        created or modified, the agent should set this object as
+        closely to the requested value as is possible for the
+        particular implementation and available resources. When
+        considering resources available, the agent must consider its
+        ability to allocate this many entries for all reports.
+
+        Note that while the actual number of entries stored in the
+        reports may fluctuate due to changing conditions, the agent
+        must continue to have storage available to satisfy the full
+        report size for all reports when necessary. Further, the agent
+        must not lower this value except as a result of a set to the
+        associated apmReportControlRequestedSize object."
+    ::= { apmReportControlEntry 6 }
+
+apmReportControlRequestedReports OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of saved reports requested to be allocated on
+        behalf of this entry."
+    ::= { apmReportControlEntry 7 }
+
+apmReportControlGrantedReports OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of saved reports the agent has allocated
+        based on the requested amount in
+        apmReportControlRequestedReports. Since each report can have
+        many entries, the total number of entries allocated will be
+        this number multiplied by the value of
+        apmReportControlGrantedSize, or 1 if that object doesn't
+        exist.
+
+        When the associated apmReportControlRequestedReports object is
+        created or modified, the agent should set this object as
+        closely to the requested value as is possible for the
+        particular implementation and available resources. When
+        considering resources available, the agent must consider its
+        ability to allocate this many reports each with the number of
+        entries represented by apmReportControlGrantedSize, or 1 if
+        that object doesn't exist.
+
+        Note that while the storage required for each report may
+        fluctuate due to changing conditions, the agent must continue
+        to have storage available to satisfy the full report size for
+        all reports when necessary. Further, the agent must not lower
+        this value except as a result of a set to the associated
+        apmReportControlRequestedSize object."
+    ::= { apmReportControlEntry 8 }
+
+apmReportControlStartTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when the system began processing the
+        report in progress. Note that the report in progress is not
+        available.
+
+        This object may be used by the management station to figure
+        out the start time for all previous reports saved for this
+        apmReportControlEntry, as reports are started at fixed
+        intervals."
+    ::= { apmReportControlEntry 9 }
+
+apmReportControlReportNumber OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of the report in progress. When an
+        apmReportControlEntry is activated, the first report will be
+        numbered one."
+    ::= { apmReportControlEntry 10 }
+
+apmReportControlDeniedInserts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of failed attempts to add an entry to reports for
+
+        this apmReportControlEntry because the number of entries
+        would have exceeded apmReportControlGrantedSize.
+
+        This number is valuable in determining if enough entries have
+        been allocated for reports in light of fluctuating network
+        usage. Note that since an entry that is denied will often be
+        attempted again, this number will not predict the exact number
+        of additional entries needed, but can be used to understand
+        the relative magnitude of the problem.
+
+        Also note that there is no ordering specified for the entries
+        in the report, thus there are no rules for which entries will
+        be omitted when not enough entries are available. As a
+        consequence, the agent is not required to delete 'least
+        valuable' entries first."
+    ::= { apmReportControlEntry 11 }
+
+apmReportControlDroppedFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of frames which were received by the agent
+        and therefore not accounted for in the *StatsDropEvents, but
+        for which the agent chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the agent
+        is out of some resources and decides to shed load from this
+        collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        This counter is only relevant if this apm report is based on
+        a data source whose collection methodology is based on
+        analyzing network traffic.
+
+        Note that if the apmReportTables are inactive because no
+        applications are enabled in the application directory, this
+        value should be 0.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { apmReportControlEntry 12 }
+
+apmReportControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { apmReportControlEntry 13 }
+
+apmReportControlStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this apmReportControlEntry. If the value
+        of this object is 'permanent', no objects in this row need to
+        be writable."
+    ::= { apmReportControlEntry 14 }
+
+apmReportControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this apmReportControlEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value. The only
+        objects in the entry that may be modified while the entry is
+        in the active state are apmReportControlRequestedSize and
+        apmReportControlRequestedReports.
+
+        If this object is not equal to active(1), all
+        associated entries in the apmReportTable shall be deleted
+        by the agent."
+    ::= { apmReportControlEntry 15 }
+
+-- The APM Report Table
+
+apmReportTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The data resulting from aggregated APM reports. Consult the
+        definition of apmReportControlAggregationType for the
+        definition of the various types of aggregations."
+    ::= { apmMibObjects 10 }
+
+apmReportEntry OBJECT-TYPE
+    SYNTAX      ApmReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apmReportTable.
+        The apmReportControlIndex value in the index identifies the
+        apmReportControlEntry on whose behalf this entry was created.
+        The apmReportIndex value in the index identifies which report
+        (in the series of reports) this entry is a part of.
+        The apmAppDirAppLocalIndex value in the index identifies
+        the common application of the transactions aggregated in this
+        entry.
+        The apmAppDirResponsivenessType value in the index
+        identifies the type of responsiveness metric reported by
+        this entry and uniquely identifies this entry when more
+        than one responsiveness metric is measured for a flow.
+        Entries will only exist in this table for those
+        combinations of AppLocalIndex and ResponsivenessType
+        that are configured 'on(1)'.
+        The protocolDirLocalIndex value in the index identifies
+        the network layer protocol of the apmReportServerAddress.
+        When the associated apmReportControlAggregationType value is
+        equal to applications(4) or clients(2), this
+        protocolDirLocalIndex value will equal 0.
+        The apmReportServerAddress value in the index identifies the
+        network layer address of the server in transactions aggregated
+        in this entry.
+        The apmNameClientID value in the index identifies the
+        client in transactions aggregated in this entry. If the
+        associated apmReportControlAggregationType is equal to
+        applications(4) or servers(3), then this protocolDirLocalIndex
+        value will equal 0.
+
+        An example of the indexing of this entry is
+        apmReportTransactionCount.3.15.3.1.8.4.192.168.1.2.3232235788
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length which exceeds
+        the maximum for the SNMP protocol. Implementations should take
+        care to avoid such combinations."
+    INDEX { apmReportControlIndex, apmReportIndex,
+            apmAppDirAppLocalIndex,
+            apmAppDirResponsivenessType,
+            protocolDirLocalIndex, apmReportServerAddress,
+            apmNameClientID }
+    ::= { apmReportTable 1 }
+
+ApmReportEntry ::= SEQUENCE {
+    apmReportIndex                  Unsigned32,
+    apmReportServerAddress          ProtocolDirNetworkAddress,
+    apmReportTransactionCount       Unsigned32,
+    apmReportSuccessfulTransactions Unsigned32,
+    apmReportResponsivenessMean     Unsigned32,
+    apmReportResponsivenessMin      Unsigned32,
+    apmReportResponsivenessMax      Unsigned32,
+    apmReportResponsivenessB1       Unsigned32,
+    apmReportResponsivenessB2       Unsigned32,
+    apmReportResponsivenessB3       Unsigned32,
+    apmReportResponsivenessB4       Unsigned32,
+    apmReportResponsivenessB5       Unsigned32,
+    apmReportResponsivenessB6       Unsigned32,
+    apmReportResponsivenessB7       Unsigned32
+}
+
+apmReportIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The value of apmReportControlReportNumber for the report to
+        which this entry belongs."
+    ::= { apmReportEntry 1 }
+
+apmReportServerAddress OBJECT-TYPE
+    SYNTAX      ProtocolDirNetworkAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network server address for this apmReportEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the index.
+
+        Since this object is an index variable, it is encoded in the
+        index according to the index encoding rules.  For example, if
+        the protocolDirLocalIndex indicates an encapsulation of ip,
+        this object is encoded as a length octet of 4, followed by the
+        4 octets of the ip address, in network byte order. Care
+        should be taken to avoid values of this object that, in
+        conjunction with the other index variables, would result in an
+        index longer than SNMP's maximum of 128 subidentifiers.
+
+        If the associated apmReportControlAggregationType is equal to
+        applications(4) or clients(2), then this object will be a null
+        string and will be encoded simply as a length octet of 0."
+    ::= { apmReportEntry 2 }
+
+apmReportTransactionCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of transactions aggregated into this record."
+    ::= { apmReportEntry 3 }
+
+apmReportSuccessfulTransactions OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of successful transactions aggregated into
+        this record."
+    ::= { apmReportEntry 4 }
+
+apmReportResponsivenessMean OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The arithmetic mean of the responsiveness metrics for all
+        successful transactions aggregated into this record."
+    ::= { apmReportEntry 5 }
+
+apmReportResponsivenessMin OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The minimum of the responsiveness metrics for all
+        successful transactions aggregated into this record."
+    ::= { apmReportEntry 6 }
+
+apmReportResponsivenessMax OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum of the responsiveness metrics for all
+        successful transactions aggregated into this record."
+    ::= { apmReportEntry 7 }
+
+-- Note that when updating a report entry, a transaction will not be
+-- counted in more than 1 bucket in an entry. It will be counted in
+-- the first bucket that matches, starting with Bucket 1 (B1). Note
+-- that if a transaction matches 2 application types, it will update
+
+-- one bucket in each of 2 entries in this table.
+
+apmReportResponsivenessB1 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness was less than boundary1 value for
+        this application."
+    ::= { apmReportEntry 8 }
+
+apmReportResponsivenessB2 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness did not fall into Bucket 1 and was
+        greater than or equal to the boundary1 value for this
+        application and less than the boundary2 value for this
+        application."
+    ::= { apmReportEntry 9 }
+
+apmReportResponsivenessB3 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness did not fall into Bucket 1 or 2
+        and as greater than or equal to the boundary2 value for this
+        application and less than the boundary3 value for this
+        application."
+    ::= { apmReportEntry 10 }
+
+apmReportResponsivenessB4 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness did not fall into Buckets 1
+        through 3 and was greater than or equal to the boundary3 value
+        for this application and less than the boundary4 value for
+        this application."
+    ::= { apmReportEntry 11 }
+
+apmReportResponsivenessB5 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness did not fall into Buckets 1
+        through 4 and was greater than or equal to the boundary4 value
+        for this application and less than the boundary5 value for
+        this application."
+    ::= { apmReportEntry 12 }
+
+apmReportResponsivenessB6 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness did not fall into Buckets 1
+        through 5 and was greater than or equal to the
+        boundary5 value for this application and less than the
+        boundary6 value for this application."
+    ::= { apmReportEntry 13 }
+
+apmReportResponsivenessB7 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of successful transactions aggregated into this
+        record whose responsiveness did not fall into Buckets 1
+        through 6 and was greater than or equal to the boundary6 value
+        for this application."
+    ::= { apmReportEntry 14 }
+
+-- APM Transaction Table
+
+apmTransactionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmTransactionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains transactions that are currently running
+        or have recently finished."
+    ::= { apmMibObjects 11 }
+
+apmTransactionEntry OBJECT-TYPE
+    SYNTAX      ApmTransactionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apmTransactionTable.
+
+        The apmAppDirAppLocalIndex value in the index identifies
+        the application of the transaction represented by this entry.
+        The apmAppDirResponsivenessType value in the index
+        identifies the type of responsiveness metric reported by
+        this entry and uniquely identifies this entry when more
+        than one responsiveness metric is measured for a flow.
+        Entries will only exist in this table for those
+        combinations of AppLocalIndex and ResponsivenessType
+        that are configured 'on(1)'.
+        The protocolDirLocalIndex value in the index identifies
+        the network layer protocol of the apmTransactionServerAddress.
+        The apmTransactionServerAddress value in the index identifies
+        the network layer address of the server in the transaction
+        represented by this entry.
+        The apmNameClientID value in the index identifies the
+        client in the transaction represented by this entry.
+
+        An example of the indexing of this entry is
+        apmTransactionCount.3.1.8.4.192.168.1.2.3232235788.2987
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length which exceeds
+        the maximum for the SNMP protocol. Implementations should take
+        care to avoid such combinations."
+    INDEX { apmAppDirAppLocalIndex,
+            apmAppDirResponsivenessType,
+            protocolDirLocalIndex, apmTransactionServerAddress,
+            apmNameClientID, apmTransactionID }
+    ::= { apmTransactionTable 1 }
+
+ApmTransactionEntry ::= SEQUENCE {
+    apmTransactionServerAddress      ProtocolDirNetworkAddress,
+    apmTransactionID                 Unsigned32,
+    apmTransactionResponsiveness     Unsigned32,
+    apmTransactionAge                TimeInterval,
+    apmTransactionSuccess            TruthValue
+}
+
+apmTransactionServerAddress OBJECT-TYPE
+    SYNTAX      ProtocolDirNetworkAddress (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network server address for this apmTransactionEntry.
+
+        This is represented as an octet string with specific semantics
+        and length as identified by the protocolDirLocalIndex
+        component of the index. This object may not be the zero length
+        string.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of ip, this object is encoded as a length octet
+        of 4, followed by the 4 octets of the ip address, in network
+        byte order. Care should be taken to avoid values of this
+        object that, in conjunction with the other index variables,
+        would result in an index longer than SNMP's maximum of 128
+        subidentifiers."
+    ::= { apmTransactionEntry 1 }
+
+apmTransactionID OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique value for this transaction amongst other
+        transactions sharing the same application layer protocol and
+        server and client addresses. Implementations may choose to use
+        the value of the client's source port, when possible."
+    ::= { apmTransactionEntry 2 }
+
+apmTransactionResponsiveness OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current value of the responsiveness metric for this
+        transaction. If this transaction has completed, the final
+        value of the metric will be available.
+
+        Note that this value may change over the lifetime of the
+        transaction and it is the final value of this metric that is
+        recorded as the responsiveness of the transaction for use in
+        other APM MIB functions."
+    ::= { apmTransactionEntry 3 }
+
+apmTransactionAge OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If this transaction is still executing, this value shall be
+
+        the length of time since it was started. If it has completed,
+        this value shall be the length of time it was executing."
+    ::= { apmTransactionEntry 4 }
+
+apmTransactionSuccess OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The success of this transaction up to this time. Once a
+        transaction has been marked as failed, it cannot move back
+        into the successful state."
+    ::= { apmTransactionEntry 5 }
+
+apmTransactionsRequestedHistorySize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of completed transactions desired to be
+        retained in the apmTransactionTable. If the agent doesn't have
+        enough resources to retain this many, it will retain as many as
+        possible. Regardless of this value, the agent must attempt to
+        keep records for all current transactions it is monitoring.
+
+        The value of this object must persist across reboots."
+    ::= { apmMibObjects 12 }
+
+-- The APM Exception table
+-- The APM Exception Table creates filters so that a management
+-- station can get immediate notification of a transaction that has
+-- had poor availability or responsiveness.
+--
+-- This function is particularly helpful in unaggregated situations
+-- where the numbers of agents is relatively high and the transaction
+-- rate per agent is relatively low (such as agents for desktops or
+-- dedicated to small workgroups). Polling agents in such an
+-- environment would either cause scalability problems (high rate) or
+-- lead to long notification delays (low rate).
+
+apmExceptionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApmExceptionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table creates filters so that a management station can
+        get immediate notification of a transaction that has had poor
+
+        availability or responsiveness.
+
+        Each apmExceptionEntry is associated with a particular type of
+        transaction and is applied to all transactions of that
+        type. Multiple apmExceptionEntries may be associated with a
+        particular type of transaction. A transaction type is
+        identified by the value of the apmAppDirAppLocalIndex
+        component of the index.
+
+        Because the quality of a transaction is not known until it is
+        completed, these thresholds are only applied after the
+        transaction has completed."
+    ::= { apmMibObjects 13 }
+
+apmExceptionEntry OBJECT-TYPE
+    SYNTAX      ApmExceptionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apmExceptionTable.
+
+        The apmAppDirAppLocalIndex value in the index identifies
+        the application this entry will monitor.
+        The apmAppDirResponsivenessType value in the index
+        identifies the type of responsiveness metric this entry will
+        monitor."
+    INDEX { apmAppDirAppLocalIndex,
+            apmAppDirResponsivenessType, apmExceptionIndex }
+    ::= { apmExceptionTable 1 }
+
+ApmExceptionEntry ::= SEQUENCE {
+    apmExceptionIndex                       Unsigned32,
+    apmExceptionResponsivenessComparison    INTEGER,
+    apmExceptionResponsivenessThreshold     Unsigned32,
+    apmExceptionUnsuccessfulException       INTEGER,
+    apmExceptionResponsivenessEvents        Counter32,
+    apmExceptionUnsuccessfulEvents          Counter32,
+    apmExceptionOwner                       OwnerString,
+    apmExceptionStorageType                 StorageType,
+    apmExceptionStatus                      RowStatus
+}
+
+apmExceptionIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        apmExceptionTable amongst other entries with equivalent index
+        values for apmAppDirAppLocalIndex and
+        apmAppDirResponsivenessType. Each such entry sets up
+        thresholds for a particular measurement of a particular
+        application."
+    ::= { apmExceptionEntry 1 }
+
+apmExceptionResponsivenessComparison OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    none(1),
+                    greater(2),
+                    less(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If this value is greater(2) or less(3), the associated
+        apmExceptionResponsivenessThreshold will be compared to this
+        value and an exception will be created if the responsiveness
+        is greater than the threshold (greater(2)) or less than the
+        threshold (less(3))."
+    ::= { apmExceptionEntry 2 }
+
+apmExceptionResponsivenessThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The threshold that responsiveness metrics are compared to."
+    ::= { apmExceptionEntry 3 }
+
+apmExceptionUnsuccessfulException OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    off(1),
+                    on(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If this value is on(2), an exception will be created if a
+        transaction of the associated type is unsuccessful."
+    ::= { apmExceptionEntry 4 }
+
+apmExceptionResponsivenessEvents OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of responsiveness exceptions generated. This
+        counter will be incremented even if no notification was sent
+        due to notifications not being configured or due to exceeding
+        the apmNotificationMaxRate value."
+    ::= { apmExceptionEntry 5 }
+
+apmExceptionUnsuccessfulEvents OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of unsuccessful exceptions generated. This
+        counter will be incremented even if no notification was sent
+        due to notifications not being configured or due to exceeding
+        the apmNotificationMaxRate value."
+    ::= { apmExceptionEntry 6 }
+
+apmExceptionOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { apmExceptionEntry 7 }
+
+apmExceptionStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The storage type of this apmReportControlEntry. If the value
+        of this object is 'permanent', no objects in this row need to
+        be writable."
+    ::= { apmExceptionEntry 8 }
+
+apmExceptionStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this apmExceptionEntry. The only objects in the
+        entry that may be modified while the entry is in the active
+        state are apmExceptionResponsivenessComparison,
+        apmExceptionResponsivenessThreshold and
+        apmExceptionUnsuccessfulException."
+    ::= { apmExceptionEntry 9 }
+
+apmThroughputExceptionMinTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Because the responsiveness for throughput-oriented
+        transactions is divided by the elapsed time, it can be very
+        sensitive to short-term performance variations for
+        transactions that take a short period of time. For example,
+        when downloading a very short file, a single dropped packet
+        could double or triple the total response time.
+
+        Further, throughput is usually examined for applications that
+        transfer a lot of data, and when doing so it is helpful to
+        conceptualize transaction costs that are proportional to the
+        amount of data separately from those costs that are relatively
+        fixed (i.e., independent of the amount of data).  For very
+        short transactions, these fixed transaction costs (handshake,
+        setup time, authentication, round-trip time) may dominate the
+        total response time for the transaction, resulting in
+        throughput measurements that aren't really proportional to the
+        network's, server's and client's combined data throughput
+        capability.
+
+        This object controls the minimum number of seconds that an
+        throughput-based transaction must exceed before an exception
+        can be generated for it. If this object is set to zero, then
+        all throughput-based transactions are candidates for
+        exceptions.
+
+        The value of this object must persist across reboots."
+    DEFVAL     { 10 }
+    ::= { apmMibObjects 14 }
+
+apmNotificationMaxRate OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of notifications that can be generated
+        from this agent by the apmExceptionTable in any 60 second
+        period.
+
+        The value of this object must persist across reboots."
+    DEFVAL { 1 }
+    ::= { apmMibObjects 15 }
+
+-- APM Notifications
+
+apmNotifications OBJECT IDENTIFIER ::= { apm 0 }
+
+apmTransactionResponsivenessAlarm NOTIFICATION-TYPE
+    OBJECTS     { apmExceptionResponsivenessThreshold,
+                  apmTransactionResponsiveness }
+    STATUS      current
+    DESCRIPTION
+        "Notification sent when a transaction exceeds a threshold
+        defined in the apmException table. The index of the
+        included apmExceptionResponsivenessThreshold object identifies
+        the apmExceptionEntry that specified the threshold. The
+        apmTransactionResponsiveness variable identifies the actual
+        transaction and its responsiveness.
+
+        Agent implementors are urged to include additional data
+        objects in the alarm that may explain the reason for the
+        alarm. It is helpful to include such data in the alarm because
+        it describes the situation at the time the alarm was
+        generated, where polls after the fact may not provide
+        meaningful information. Examples of such information are CPU
+        load, memory utilization, network utilization, and transaction
+        statistics."
+    ::= { apmNotifications 1 }
+
+apmTransactionUnsuccessfulAlarm NOTIFICATION-TYPE
+    OBJECTS     { apmExceptionResponsivenessThreshold }
+    STATUS      current
+    DESCRIPTION
+        "Notification sent when a transaction is unsuccessful.
+        The index of the included apmExceptionResponsivenessThreshold
+        object identifies both the type of the transaction that caused
+        this notification as well as the apmExceptionEntry that
+        specified the threshold.
+
+        Agent implementors are urged to include additional data
+        objects in the alarm that may explain the reason for the
+        alarm. It is helpful to include such data in the alarm because
+        it describes the situation at the time the alarm was
+        generated, where polls after the fact may not provide
+        meaningful information. Examples of such information are CPU
+        load, memory utilization, network utilization, and transaction
+        statistics."
+    ::= { apmNotifications 2 }
+
+apmCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the APM MIB"
+    MODULE  -- this module
+        MANDATORY-GROUPS { apmAppDirGroup, apmReportGroup }
+
+        GROUP apmUserDefinedApplicationsGroup
+          DESCRIPTION
+              "Implementation of the apmUserDefinedApplicationsGroup
+              is optional."
+
+        GROUP apmTransactionGroup
+          DESCRIPTION
+              "Implementation of the apmTransactionGroup is optional."
+
+        GROUP apmExceptionGroup
+          DESCRIPTION
+              "Implementation of the apmExceptionGroup is optional."
+
+        GROUP apmNotificationGroup
+          DESCRIPTION
+              "Implementation of the apmNotificationGroup is optional."
+    ::= { apmCompliances 1 }
+
+apmAppDirGroup OBJECT-GROUP
+    OBJECTS { apmAppDirConfig,
+              apmAppDirResponsivenessBoundary1,
+              apmAppDirResponsivenessBoundary2,
+              apmAppDirResponsivenessBoundary3,
+              apmAppDirResponsivenessBoundary4,
+              apmAppDirResponsivenessBoundary5,
+              apmAppDirResponsivenessBoundary6,
+              apmBucketBoundaryLastChange, apmAppDirID,
+              apmNameMachineName, apmNameUserName }
+    STATUS  current
+    DESCRIPTION
+        "The APM MIB directory of applications and application verbs."
+    ::=  { apmGroups 1 }
+
+apmUserDefinedApplicationsGroup OBJECT-GROUP
+    OBJECTS {     apmHttpFilterAppLocalIndex,
+                  apmHttpFilterServerProtocol,
+                  apmHttpFilterServerAddress, apmHttpFilterURLPath,
+                  apmHttpFilterMatchType, apmHttpFilterOwner,
+                  apmHttpFilterStorageType, apmHttpFilterRowStatus,
+                  apmHttpIgnoreUnregisteredURLs, apmHttp4xxIsFailure,
+                  apmUserDefinedAppParentIndex,
+                  apmUserDefinedAppApplication }
+    STATUS  current
+    DESCRIPTION
+        "Objects used for creating and managing user-defined
+        applications."
+    ::= { apmGroups 2 }
+
+apmReportGroup OBJECT-GROUP
+    OBJECTS { apmReportControlDataSource,
+              apmReportControlAggregationType,
+              apmReportControlInterval,
+              apmReportControlRequestedSize,
+              apmReportControlGrantedSize,
+              apmReportControlRequestedReports,
+              apmReportControlGrantedReports,
+              apmReportControlStartTime,
+              apmReportControlReportNumber,
+              apmReportControlDeniedInserts,
+              apmReportControlDroppedFrames,
+              apmReportControlOwner,
+              apmReportControlStorageType,
+              apmReportControlStatus,
+              apmReportTransactionCount,
+              apmReportSuccessfulTransactions,
+              apmReportResponsivenessMean,
+              apmReportResponsivenessMin,
+              apmReportResponsivenessMax,
+              apmReportResponsivenessB1,
+              apmReportResponsivenessB2,
+              apmReportResponsivenessB3,
+              apmReportResponsivenessB4,
+              apmReportResponsivenessB5,
+              apmReportResponsivenessB6,
+              apmReportResponsivenessB7 }
+    STATUS  current
+    DESCRIPTION
+        "The apm report group controls the creation and retrieval of
+        reports that aggregate application performance."
+    ::=  { apmGroups 3 }
+
+apmTransactionGroup OBJECT-GROUP
+    OBJECTS { apmTransactionResponsiveness,
+              apmTransactionAge, apmTransactionSuccess,
+              apmTransactionsRequestedHistorySize }
+    STATUS  current
+    DESCRIPTION
+        "The apm transaction group contains statistics for
+        individual transactions."
+    ::=  { apmGroups 4 }
+
+apmExceptionGroup OBJECT-GROUP
+    OBJECTS { apmExceptionResponsivenessComparison,
+              apmExceptionResponsivenessThreshold,
+              apmExceptionUnsuccessfulException,
+              apmExceptionResponsivenessEvents,
+              apmExceptionUnsuccessfulEvents,
+              apmExceptionOwner, apmExceptionStorageType,
+              apmExceptionStatus, apmThroughputExceptionMinTime,
+              apmNotificationMaxRate }
+    STATUS  current
+    DESCRIPTION
+        "The apm exception group causes notifications to be sent
+        whenever transactions are detected that had poor availability
+        or responsiveness."
+    ::=  { apmGroups 5 }
+
+apmNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { apmTransactionResponsivenessAlarm,
+                    apmTransactionUnsuccessfulAlarm }
+    STATUS        current
+    DESCRIPTION
+        "Notifications sent by an APM MIB agent."
+    ::= { apmGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/APPC-MIB.mib b/snmp_builder/mibs/APPC-MIB.mib
new file mode 100644
index 0000000..f59317c
--- /dev/null
+++ b/snmp_builder/mibs/APPC-MIB.mib
@@ -0,0 +1,5104 @@
+APPC-MIB DEFINITIONS        ::= BEGIN
+
+IMPORTS
+      DisplayString, InstancePointer, TEXTUAL-CONVENTION, DateAndTime
+                FROM SNMPv2-TC
+
+      mib-2, Counter32, Gauge32, Integer32, TimeTicks,
+      OBJECT-TYPE, MODULE-IDENTITY
+                FROM SNMPv2-SMI
+
+      snanauMIB
+                FROM SNA-NAU-MIB
+
+      MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF;
+
+appcMIB MODULE-IDENTITY
+      LAST-UPDATED  "9512150000Z"
+      ORGANIZATION  "IETF SNA NAU MIB Working Group"
+      CONTACT-INFO
+                "
+                        Michael Allen
+                        Wall Data Inc.
+                        P.O.Box 1120
+                        Duval, WA 98019, USA
+                        Tel:    1 206 844 3505
+                        E-mail: mallen@hq.walldata.com
+
+                        Bob Clouston
+                        Cisco Systems
+                        7025 Kit Creek Road
+                        P.O. Box 14987
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 472 2333
+                        E-mail: clouston@cisco.com
+
+                        Zbigniew Kielczewski
+                        Cisco Systems
+                        3100 Smoketree Court
+                        Raleigh, NC 27604, USA
+                        Tel:    1 919 871 6326
+                        E-mail: zbig@cisco.com
+
+                        William Kwan
+                        Jupiter Technology Inc.
+                        200 Prospect Street
+                        Waltham, MA 02254, USA
+                        Tel:    1 617 894 9300, x423
+                        E-mail: billk@jti.com
+
+                        Bob Moore
+                        IBM Corporation
+                        800 Park Offices Drive
+                        CNMA/664
+                        P.O. Box 12195
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 254 4436
+                        E-mail: remoore@ralvm6.vnet.ibm.com
+                "
+      DESCRIPTION
+          "This is the MIB module for objects used to manage network
+          devices with APPC capabilities."
+::= { snanauMIB 3 }
+
+appcObjects          OBJECT IDENTIFIER ::= { appcMIB 1 }
+  appcGlobal         OBJECT IDENTIFIER ::= { appcObjects 1 }
+  appcLu             OBJECT IDENTIFIER ::= { appcObjects 2 }
+  appcTp             OBJECT IDENTIFIER ::= { appcObjects 3 }
+  appcSession        OBJECT IDENTIFIER ::= { appcObjects 4 }
+  appcConversation   OBJECT IDENTIFIER ::= { appcObjects 5 }
+  appcCPIC           OBJECT IDENTIFIER ::= { appcObjects 6 }
+
+-- *********************************************************************
+-- Objects in this MIB are used to model an SNA device that supports
+-- APPC LUs.
+-- Following is the overall organization of the MIB.
+--
+-- 1.   APPC Global Objects            - global values, defaults,
+--                                       controls (including CNOS)
+-- 2.   APPC Defined Lu Tables         - Admin and Oper
+-- 3.   APPC Defined LU Pair Tables    - Admin and Oper
+-- 4.   APPC Mode Tables               - Admin and Oper
+-- 5.   APPC TP Tables                 - Admin only
+-- 6.   APPC Session Tables            - Active, Stats, History, RTP
+-- 7.   APPC Conversation Table        - Active, History
+-- 8.   APPC CPIC side info            - Admin and Oper
+-- *********************************************************************
+
+-- *********************************************************************
+
+-- Textual Convention
+
+-- ---------------------------------------------------------------------
+SnaSenseData ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "To facilitate their display by a Management Station, sense
+          data objects in the MIB are represented as DisplayStrings of
+          size 8.  Eight '0' characters indicates that no sense data
+          identifying an SNA error condition is available."
+      SYNTAX DisplayString (SIZE (8))
+-- *********************************************************************
+-- APPC Control Objects
+-- ---------------------------------------------------------------------
+-- The following objects allow:
+--    * the collection of APPC Session information counters
+--      to be started and stopped
+--    * the collection of APPC Session RSCVs
+--      to be started and stopped
+--    * the collection of APPC tracing information to be started and
+--      stopped
+--
+-- These objects are for implementations that wish to provide
+-- this level of operational control.  This group is
+-- conditionally mandatory in the conformance section of the MIB.
+--
+-- *********************************************************************
+
+-- *********************************************************************
+-- Control Admin
+--      These objects contain the desired states for the controls.
+--      The actual states are in the Oper objects.
+-- *********************************************************************
+appcCntrlAdminGroup OBJECT IDENTIFIER ::= { appcGlobal 1 }
+
+appcCntrlAdminStat OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Indicates the desired state of statistics collection:
+
+              notActive  collection of counters is not active.
+              active     collection of counters is active.
+
+           When this object is set to notActive, all of the entries are
+           removed from the appcSessStatsTable."
+      ::= { appcCntrlAdminGroup  1 }
+
+appcCntrlAdminRscv OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Indicates the desired state of RSCV information collection:
+              notActive  collection of route selection control vectors
+                         is not active.
+              active     collection of route selection control vectors
+                         is active."
+      ::= { appcCntrlAdminGroup  2 }
+
+appcCntrlAdminTrace OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Indicates the desired state of tracing:
+
+              notActive  collection of tracing information is not active
+              active     collection of tracing information is active"
+      ::= { appcCntrlAdminGroup  3 }
+
+appcCntrlAdminTraceParm OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..128))
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies the parameter to be used in conjunction with
+          activating tracing.  The actual content is implementation
+          dependent."
+      ::= { appcCntrlAdminGroup  4 }
+
+-- *********************************************************************
+
+-- Control Oper
+--      These objects contain the actual states of the controls.
+-- *********************************************************************
+appcCntrlOperGroup OBJECT IDENTIFIER ::= { appcGlobal 2 }
+
+appcCntrlOperStat OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the current collection options in effect:
+
+              notActive  collection of counters is not active.
+              active     collection of counters is active.
+
+          Statistical entries are present in the appcSessStatsTable
+          only when the value of this object is 'active'."
+      ::= { appcCntrlOperGroup 1 }
+
+appcCntrlOperStatTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Time since the appcCntrlOperStat object last changed.
+           This time is in hundreds of a second."
+      ::= { appcCntrlOperGroup 2 }
+
+appcCntrlOperRscv OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the current collection options in effect:
+
+              notActive  collection of route selection control vectors
+                         is not active.
+              active     collection of route selection control vectors
+                         is active."
+      ::= { appcCntrlOperGroup 3 }
+
+appcCntrlOperRscvTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Time since the appcCntrlOperRscv object last changed.
+           This time is in hundreds of a second."
+      ::= { appcCntrlOperGroup 4 }
+
+appcCntrlOperTrace OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the current state of tracing:
+
+              notActive  collection of tracing information is not active.
+              active     collection of tracing information is active."
+      ::= { appcCntrlOperGroup 5 }
+
+appcCntrlOperTraceTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Time since the appcCntrlOperTrace object last changed.
+           This time is in hundreds of a second."
+      ::= { appcCntrlOperGroup 6 }
+
+appcCntrlOperTraceParm OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..128))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the parameter used in conjunction with activating
+           tracing. The actual content is implementation dependent."
+      ::= { appcCntrlOperGroup 7 }
+
+-- ******************************************************************
+
+--
+--    APPC global settings
+--
+-- ******************************************************************
+appcGlobalObjects OBJECT IDENTIFIER ::= { appcGlobal 3 }
+
+appcUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time, in hundredths of a second, since the
+          APPC portion of the system was last reinitialized."
+      ::= { appcGlobalObjects 1 }
+
+appcDefaultModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the mode name to be used under the following
+           conditions:
+
+              When an incoming BIND request contains a mode name not
+              defined at the local node.  The parameters defined for
+              this mode are used for the inbound implicit mode
+              capability.
+
+              When an APPC program issues an [MC_]ALLOCATE,
+              [MC_]SEND_CONVERSATION, or CNOS verb, or when a CPI-C
+              program issues an Allocate (CMALLC) call,
+              specifying a mode name not defined at the local node.  The
+              parameters defined for this mode are used for the outbound
+              implicit mode capability.
+
+           This mode name must match a defined entry in the
+           appcModeAdminTable."
+      ::= { appcGlobalObjects 2 }
+
+appcDefaultLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the local LU that is to serve as the
+          default LU.  This is the default LU to which are routed inbound
+
+          BIND requests that exclude the secondary LU name.  This field
+          is from 1 to 17 characters in length, including a period (.)
+          which separates the NetId from the NAU name if the NetId is
+          present.  This local LU name must match a defined entry in the
+          appcLluAdminTable."
+      ::= { appcGlobalObjects 3 }
+
+appcDefaultImplInbndPlu OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether or not inbound implicit partner LU support
+          is enabled.  The following values are defined:
+
+              no   -  Specifies that inbound implicit partner LU support
+                      is disabled, which means that an incoming bind that
+                      specifies a partner LU that is not defined at the
+                      local node will be rejected.
+
+              yes  -  Specifies that inbound implicit partner LU support
+                      is enabled, which provides the capability to accept
+                      an incoming BIND request that contains a partner LU
+                      name that is not defined at the local node."
+      ::= { appcGlobalObjects 4 }
+
+appcDefaultMaxMcLlSndSize OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum size of a logical record to be used for
+          a mapped conversation when sending data to either the inbound
+          or outbound implicit partner LU.  This size is the maximum
+          number of bytes in a single logical record, as indicated in the
+          LL field of the record.  The default value is 32767.
+
+          Note that this object does not limit the maximum size that an
+          application program can supply on the Send Data call for a
+          mapped conversation."
+      ::= { appcGlobalObjects 5 }
+
+appcDefaultFileSpec OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..80))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The local file specification that is to be searched by the
+           APPC attach manager when no DEFINE_TP verb has been issued
+           for the TP name received on an incoming attach.  In this
+           case, the attach manager will attempt to start a program
+           whose file name is the same as the incoming TP name.  If
+           found, the program is loaded. If not found, the attach is
+           rejected.
+
+           The value '*' indicates that the normal search path for
+           executable programs is to be used for locating an undefined
+           transaction program.
+
+           A null string indicates that there is no default file
+           specification for undefined transaction programs."
+      ::= { appcGlobalObjects 6 }
+
+appcDefaultTpOperation OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),
+                      queuedOperatorStarted(2),
+                      queuedOperatorPreloaded(3),
+                      queuedAmStarted(4),
+                      nonqueuedAmStarted(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies how the program will be started.
+
+              other - Specifies that the default TP operation is none of
+                      the methods specified below. It may be a
+                      product-specific method.
+
+              queuedOperatorStarted - Specifies that one version of the
+                      program will be run at a time.  If an incoming
+                      attach arrives and the program has not been started
+                      yet, APPC will issue a message to the operator to
+                      start the specified program.  Subsequent attaches
+                      that arrive while the program is active will be
+                      queued.
+
+              queuedOperatorPreloaded - Specifies that one version
+
+                      of the program will be run at a time.  If an
+                      incoming attach arrives and the program has not
+                      been started yet, the Attach will be rejected.  The
+                      APPC attach manager determines that a TP has
+                      started upon reception of an APPC RECEIVE_ALLOCATE
+                      verb, or a CPI-C Accept_Conversation (CMACCP) or
+                      Specify_Local_TP_Name (CMSLTP) call.  No message is
+                      sent to the operator.  Subsequent attaches that
+                      arrive while the program is active are queued.
+
+              queuedAmStarted - Specifies that one version of the
+                      program will be run at a time and will be started
+                      by the APPC attach manager.  Subsequent attaches
+                      that arrive while the program is active will be
+                      queued.
+
+              nonqueuedAmStarted - Specifies that multiple copies of
+                      the program will be run at a time and will be
+                      started by the APPC attach manager. "
+      ::= { appcGlobalObjects 7 }
+
+appcDefaultTpConvSecRqd OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether or not conversation security will be used
+          for default TPs.
+
+              no   -  Specifies that the incoming attach does not have to
+                      contain security information.
+              yes  -  Specifies that the incoming attach must contain
+                      valid authentication information (e.g., user ID and
+                      password)."
+      ::= { appcGlobalObjects 8 }
+
+appcLocalCpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the local control point.  This field is
+          from 0 to 17 characters in length, including a period (.) which
+
+          separates the NetId from the NAU name if the NetId is present.
+          A null string indicates that the value is unknown."
+      ::= { appcGlobalObjects 9 }
+
+appcActiveSessions OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the total number of active APPC sessions supported
+          by this implementation.  Sessions for which both LUs are local
+          are counted twice."
+      ::= { appcGlobalObjects 10 }
+
+appcActiveHprSessions OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the total number of active HPR APPC sessions."
+      ::= { appcGlobalObjects 11 }
+
+-- ******************************************************************
+--    APPC CNOS control
+--
+-- This group contains objects for issuing APPC Change-Number-of-Session
+-- (CNOS) commands to a specific mode.  Specifically, the commands
+-- supported are:
+--              INITIALIZE_SESSION_LIMIT
+--              CHANGE_SESSION_LIMIT
+--              RESET_SESSION_LIMIT
+--
+--
+-- ******************************************************************
+appcCnosControl OBJECT IDENTIFIER ::= { appcGlobal 4 }
+
+appcCnosCommand OBJECT-TYPE
+      SYNTAX INTEGER {
+                      initSesslimit(1),
+                      changeSesslimit(2),
+                      resetSesslimit(3)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies the CNOS command or verb to issue.  First set the
+          values of the particular CNOS parameter objects (from the range
+          { appcCnosControl 2 } through { appcCnosControl 8 }) that apply
+          to the CNOS command to be executed, set the three CNOS target
+          objects ({ appcCnosControl 9 } through { appcCnosControl 11 }),
+          then set this object to the command to be executed.
+
+          Here is the list of parameter objects that must be set for each
+          of the CNOS commands:
+
+             INIT_SESSION_LIMIT -
+                appcCnosMaxSessLimit
+                appcCnosMinCwinLimit
+                appcCnosMinClosLimit
+                appcCnosTargetLocLuName
+                appcCnosTargetParLuName
+                appcCnosTargetModeName
+
+             CHANGE_SESSION_LIMIT -
+                appcCnosMaxSessLimit
+                appcCnosMinCwinLimit
+                appcCnosMinClosLimit
+                appcCnosResponsible
+                appcCnosTargetLocLuName
+                appcCnosTargetParLuName
+                appcCnosTargetModeName
+
+             RESET_SESSION_LIMIT -
+                appcCnosResponsible
+                appcCnosDrainPart
+                appcCnosForce
+                appcCnosTargetLocLuName
+                appcCnosTargetParLuName
+                appcCnosTargetModeName
+          "
+      ::= { appcCnosControl 1 }
+
+appcCnosMaxSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum value that the local LU is to use,
+          during CNOS processing, for the session limit.  The local LU,
+          as a target LU, will negotiate a higher session limit it
+          receives in the CNOS request down to this maximum value.  The
+
+          local LU, as a source LU, will restrict the session limit it
+          sends in a CNOS request to a value less than or equal to this
+          maximum value.
+
+           If set (i.e., greater than 0), this overrides the maximum
+           session limit defined in the appcModeAdminTable.
+
+           This parameter should be set to the desired value before
+           setting the command (appcCnosCommand).
+
+           This parameter applies to the INITIALIZE_SESSION_LIMIT and
+           CHANGE_SESSION_LIMIT verbs."
+      DEFVAL { 0 }
+      ::= { appcCnosControl 2 }
+
+appcCnosMinCwinLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies the default minimum contention winner sessions
+          limit.
+
+          This parameter should be set to the desired value before
+          setting the command (appcCnosCommand).
+
+          This parameter applies to the INITIALIZE_SESSION_LIMIT and
+          CHANGE_SESSION_LIMIT verbs."
+      DEFVAL { 0 }
+      ::= { appcCnosControl 3 }
+
+appcCnosMinClosLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies the default minimum contention loser sessions limit.
+
+           This parameter should be set to the desired value before
+           setting the command (appcCnosCommand).
+
+           This parameter applies to the INITIALIZE_SESSION_LIMIT and
+           CHANGE_SESSION_LIMIT verbs."
+      DEFVAL { 0 }
+      ::= { appcCnosControl 4 }
+
+appcCnosDrainSelf OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the local LU is draining its conversations
+          for this mode.  When a mode session limit is reset (via a CNOS
+          RESET_SESSION_LIMIT request), the local LU could be set to
+          process all queued conversations before deactivating all of the
+          sessions (using the SNA Bracket Initiation Stopped or BIS
+          protocol).
+
+          This parameter should be set to the desired value before
+          setting the command (appcCnosCommand).
+
+          This parameter applies only to the RESET_SESSION_LIMIT verb."
+      DEFVAL { no }
+      ::= { appcCnosControl 5 }
+
+appcCnosDrainPart OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the partner LU is draining its conversations
+          for this mode.  When a mode session limit is reset (via a CNOS
+          RESET_SESSION_LIMIT request), the partner LU could be set to
+          process all queued conversations before deactivating all of the
+          sessions (using the SNA Bracket Initiation Stop or BIS
+          protocol).
+
+          This parameter should be set to the desired value before
+          setting the command (appcCnosCommand).
+
+          This parameter applies only to the RESET_SESSION_LIMIT verb."
+      DEFVAL { yes }
+      ::= { appcCnosControl 6 }
+
+appcCnosResponsible OBJECT-TYPE
+      SYNTAX INTEGER {
+                      source(1),
+                      target(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies which LU is responsible for selecting and
+          deactivating sessions as a result of a change that decreases
+          the session limit or the maximum number of contention winner
+          sessions for the source or target LU.  If no session need to be
+          deactivated, this parameter is ignored.
+
+                source  -       specifies that the source (local) LU is
+                                responsible.  The target (partner) LU
+                                cannot negotiate this value.
+                target  -       specifies that the target (partner) LU is
+                                responsible. The target LU can negotiate
+                                this value to source.
+
+           This parameter should be set to the desired value before
+           setting the command (appcCnosCommand).
+
+           This parameter applies to the RESET_SESSION_LIMIT and
+           CHANGE_SESSION_LIMIT verbs."
+      DEFVAL { source }
+      ::= { appcCnosControl 7 }
+
+appcCnosForce OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the local LU should force the resetting of
+          the session limit when certain error conditions occur that
+          prevent the successful exchange of CNOS request and reply.
+
+           This parameter should be set to the desired value before
+
+           setting the command (appcCnosCommand).
+
+           This parameter applies only to the RESET_SESSION_LIMIT verb."
+      DEFVAL { no }
+      ::= { appcCnosControl 8 }
+
+appcCnosTargetLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU to which the CNOS command is
+           to be applied. This field is from 1 to 17 characters in
+           length, including a period (.) which separates the
+           NetId from the NAU name if the NetId is present.
+
+           This object should be set to the desired value before setting
+           the command (appcCnosCommand).
+
+           This parameter applies to all CNOS verbs."
+      ::= { appcCnosControl 9 }
+
+appcCnosTargetParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU to which the CNOS command is
+           to be applied. This field is from 1 to 17 characters in
+           length, including a period (.) which separates the
+           NetId from the NAU name if the NetId is present.
+
+           This object should be set to the desired value before setting
+           the command (appcCnosCommand).
+
+           This parameter applies to all CNOS verbs."
+      ::= { appcCnosControl 10 }
+
+appcCnosTargetModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Specifies the mode name to which the CNOS command is to be
+
+           applied.
+
+           This object should be set to the desired value before setting
+           the command (appcCnosCommand).
+
+           This parameter applies to all CNOS verbs."
+      ::= { appcCnosControl 11 }
+
+-- *********************************************************************
+--    APPC LU information
+-- ---------------------------------------------------------------------
+--  Local LU
+--  Partner LU
+--  Mode
+-- *********************************************************************
+
+-- *********************************************************************
+--  APPC Local LU
+--
+--  The entries in the following tables provide information for
+--  independent and dependent LU 6.2.
+--
+-- *********************************************************************
+
+-- *********************************************************************
+--    APPC Local LU Admin Table
+--    Objects in this table contain default or expected configuration
+--    values for local 6.2 LUs.
+-- *********************************************************************
+
+appcLluAdminTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcLluAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC Local LU Admin Table."
+      ::= { appcLu 1 }
+
+appcLluAdminEntry OBJECT-TYPE
+      SYNTAX AppcLluAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Information about local APPC LUs. "
+      INDEX { appcLluAdminName }
+      ::= { appcLluAdminTable 1 }
+
+AppcLluAdminEntry     ::= SEQUENCE {
+        appcLluAdminName               DisplayString,
+        appcLluAdminDepType            INTEGER,
+        appcLluAdminLocalAddress       OCTET STRING,
+        appcLluAdminSessLimit          Integer32,
+        appcLluAdminBindRspMayQ        INTEGER,
+        appcLluAdminCompression        INTEGER,
+        appcLluAdminInBoundCompLevel   INTEGER,
+        appcLluAdminOutBoundCompLevel  INTEGER,
+        appcLluAdminCompRleBeforeLZ    INTEGER,
+        appcLluAdminAlias              DisplayString
+                     }
+
+appcLluAdminName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the local LU.  This field is from 1 to
+          17 characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present."
+      ::= { appcLluAdminEntry 1 }
+
+appcLluAdminDepType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      dependent(1),
+                      independent(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This value identifies whether the LU is dependent or
+          independent."
+      ::= { appcLluAdminEntry 2 }
+
+appcLluAdminLocalAddress OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The local address for this LU is a byte with a value ranging
+          from 0 to 254.  For dependent LUs, this value ranges from 1 to
+
+          254; for independent LUs this value is always 0."
+      ::= { appcLluAdminEntry 3 }
+
+appcLluAdminSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of sessions supported by this LU."
+      ::= { appcLluAdminEntry 4 }
+
+appcLluAdminBindRspMayQ OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether or not the local LU, as the sender of a BIND
+          request, allows a partner partner LU to delay sending the BIND
+          response if the partner LU cannot process the BIND request
+          immediately."
+      ::= { appcLluAdminEntry 5 }
+
+appcLluAdminCompression OBJECT-TYPE
+      SYNTAX INTEGER {
+                      prohibited(1),
+                      required(2),
+                      negotiable(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether compression is supported. The local LU uses
+           this value for negotiation during session activation
+           (SNA BIND).
+
+              prohibited  -  specifies that no compression is to be used.
+              required    -  specifies that compression is required.
+              negotiable  -  specifies that the usage of compression
+                             is to be negotiated between the LUs. The
+                             level of compression is also negotiated."
+      ::= { appcLluAdminEntry 6 }
+
+appcLluAdminInBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          inbound data.  The local LU uses this value in conjunction with
+          appcLluAdminCompression for negotiation during session
+          activation (SNA BIND).
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger number bits used for the code, the more
+                       storage space is required for the dictionary, but
+                       the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcLluAdminEntry 7 }
+
+appcLluAdminOutBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          outbound data.  The local LU uses this value in conjunction
+          with appcLluAdminCompression for negotiation during session
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcLluAdminEntry 8 }
+
+appcLluAdminCompRleBeforeLZ OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether run-length encoding is to be applied to the
+          data before applying Lempel-Ziv-like compression.  The local LU
+          uses this value for negotiation during session activation (SNA
+          BIND).  This parameter is only supported if LZ compression is
+          used."
+      ::= { appcLluAdminEntry 9 }
+
+appcLluAdminAlias OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A local alias for the local LU.  If not known or
+           not applicable, this object contains a zero-length
+           string."
+      ::= { appcLluAdminEntry 10 }
+
+-- *********************************************************************
+--    APPC Local LU Oper Table
+
+--    Objects in this table contain current operational values, such
+--    as state values or negotiated parameters, for local 6.2 LUs.
+-- *********************************************************************
+
+appcLluOperTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcLluOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC Local LU Operational Table."
+      ::= { appcLu 2 }
+
+appcLluOperEntry OBJECT-TYPE
+      SYNTAX AppcLluOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Information about local APPC LUs."
+      INDEX { appcLluOperName }
+      ::= { appcLluOperTable 1 }
+
+AppcLluOperEntry     ::= SEQUENCE {
+        appcLluOperName               DisplayString,
+        appcLluOperDepType            INTEGER,
+        appcLluOperLocalAddress       OCTET STRING,
+        appcLluOperSessLimit          Integer32,
+        appcLluOperBindRspMayQ        INTEGER,
+        appcLluOperCompression        INTEGER,
+        appcLluOperInBoundCompLevel   INTEGER,
+        appcLluOperOutBoundCompLevel  INTEGER,
+        appcLluOperCompRleBeforeLZ    INTEGER,
+        appcLluOperAlias              DisplayString,
+        appcLluOperActiveSessions     Gauge32
+                     }
+
+appcLluOperName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the local LU.  This field is from 1 to
+          17 characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present."
+      ::= { appcLluOperEntry 1 }
+
+appcLluOperDepType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      dependent(1),
+                      independent(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This value identifies whether the LU is dependent or
+          independent."
+      ::= { appcLluOperEntry 2 }
+
+appcLluOperLocalAddress OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The local address for this LU is a byte with a value ranging
+          from 0 to 254.  For dependent LUs, this value ranges from 1 to
+          254; for independent LUs this value is always 0."
+      ::= { appcLluOperEntry 3 }
+
+appcLluOperSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of sessions supported by this LU."
+      ::= { appcLluOperEntry 4 }
+
+appcLluOperBindRspMayQ OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether or not the local LU, as the sender of a BIND
+          request, allows a partner LU to delay sending the BIND
+          response if the partner LU cannot process the BIND request
+          immediately."
+      ::= { appcLluOperEntry 5 }
+
+appcLluOperCompression OBJECT-TYPE
+      SYNTAX INTEGER {
+                      prohibited(1),
+                      required(2),
+                      negotiable(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether compression is supported.  The local LU uses
+          this value for negotiation during session activation (SNA
+          BIND).
+
+              prohibited  -  specifies that no compression is to be used.
+              required    -  specifies that compression is required.
+              negotiable  -  specifies that the usage of compression
+                             is to be negotiated between the LUs. The
+                             level of compression is also negotiated."
+      ::= { appcLluOperEntry 6 }
+
+appcLluOperInBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          inbound data.  The local LU uses this value in conjunction with
+          appcLluOperCompression for negotiation during session
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcLluOperEntry 7 }
+
+appcLluOperOutBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          outbound data.  The local LU uses this value in conjunction
+          with appcLluAdminCompression for negotiation during session
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcLluOperEntry 8 }
+
+appcLluOperCompRleBeforeLZ OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether run-length encoding is to be applied to the
+          data before applying Lempel-Ziv-like compression.  The local LU
+          uses this value for negotiation during session activation (SNA
+          BIND).  This parameter is only supported if LZ compression is
+          used."
+      ::= { appcLluOperEntry 9 }
+
+appcLluOperAlias OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A local alias for the local LU.  If not known or
+           not applicable, this object contains a zero-length
+           string."
+      ::= { appcLluOperEntry 10 }
+
+appcLluOperActiveSessions OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the total number of active APPC sessions for this
+          LU."
+      ::= { appcLluOperEntry 11 }
+
+-- *********************************************************************
+--    APPC LU Pair Admin Table
+--    Objects in this table contain default or expected configuration
+--    values for 6.2 LU pairs.  An LU pair consists of a local LU and
+--    a partner LU, which may or may not be local.
+-- *********************************************************************
+appcLuPairAdminTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcLuPairAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC Partner LU administrative Table"
+      ::= { appcLu 3 }
+
+appcLuPairAdminEntry OBJECT-TYPE
+      SYNTAX AppcLuPairAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC Partner LU Information Table.
+          It is indexed by the local and partner LU Names."
+      INDEX { appcLuPairAdminLocLuName,
+              appcLuPairAdminParLuName }
+      ::= { appcLuPairAdminTable 1 }
+
+AppcLuPairAdminEntry     ::= SEQUENCE {
+
+      appcLuPairAdminLocLuName       DisplayString,
+      appcLuPairAdminParLuName       DisplayString,
+      appcLuPairAdminParLuAlias      DisplayString,
+      appcLuPairAdminSessLimit       Integer32,
+      appcLuPairAdminSessSec         INTEGER,
+      appcLuPairAdminSecAccept       INTEGER,
+      appcLuPairAdminLinkObjId       InstancePointer,
+      appcLuPairAdminParaSessSup     INTEGER
+
+                     }
+
+appcLuPairAdminLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU to which this partner LU
+           definition applies. This field is from 1 to 17 characters in
+           length, including a period (.) which separates the
+           NetId from the NAU name if the NetId is present.
+
+           The reserved value '*ALL' indicates that the partner LU
+           definition applies to all local LUs, and not just to a single
+           local LU."
+      ::= { appcLuPairAdminEntry 1 }
+
+appcLuPairAdminParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU.
+           This field is from 1 to 17 characters in
+           length, including a period (.) which separates the
+           NetId from the NAU name if the NetId is present."
+      ::= { appcLuPairAdminEntry 2 }
+
+appcLuPairAdminParLuAlias OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A local alias for the partner LU.  If not known or
+           not applicable, this object contains a zero-length
+           string."
+      ::= { appcLuPairAdminEntry 3 }
+
+appcLuPairAdminSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of sessions supported by this partner LU."
+      ::= { appcLuPairAdminEntry 4 }
+
+appcLuPairAdminSessSec OBJECT-TYPE
+      SYNTAX INTEGER {
+                      required(1),
+                      accepted(2),
+                      notAllowed(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the type of session-level security information that
+          a local LU will accept on BIND requests it receives from the
+          partner LU.
+
+          required    -   Specifies that the BIND request must carry
+                          session level verification information that
+                          will be verified upon receipt.
+          accepted    -   Specifies that the BIND request may carry
+                          session level verification information that
+                          will be verified upon receipt.
+          notAllowed  -   Specifies that the BIND request must not carry
+                          session level verification information."
+      ::= { appcLuPairAdminEntry 5 }
+
+appcLuPairAdminSecAccept OBJECT-TYPE
+      SYNTAX INTEGER {
+
+                      none(1),
+                      conversation(2),
+                      alreadyVerified(3),
+                      persistentVerification(4),
+                      aVandpV(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies support for different levels of access security
+           information in ATTACH requests received from this partner LU.
+
+           Possible values are:
+
+                none    -   No access security information will be
+                            accepted on allocation requests (ATTACH) from
+                            this LU.
+                conversation
+                        -   Allocation requests will not be accepted that
+                            include already verified or persistent
+                            verification indicators.  Accept
+                            conversation-level access security
+                            information, which must include both a user
+                            Id and password, and may also include a
+                            profile.
+                alreadyVerified
+                        -   Allocation requests will be accepted that
+                            include already verified indicators.
+                            Persistent verification indicators will not
+                            be accepted.
+                persistentVerification
+                        -   Allocation requests will be accepted that
+                            include persistent verification indicators.
+                            Already verified indicators will not be
+                            accepted.
+                aVandpV -   Allocation requests will be accepted that
+                            include already verified or persistent
+                            verification indicators."
+      ::= { appcLuPairAdminEntry 6 }
+
+appcLuPairAdminLinkObjId OBJECT-TYPE
+      SYNTAX InstancePointer
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the link associated with this partner LU.  This
+          value points to the row in the table containing information on
+
+          the link instance.  (e.g., the sdlcLSAdminTable of the SNA DLC
+          MIB module).  This object may be NULL if the link is not
+          specified or if a link is not applicable (as for APPN-level
+          nodes)."
+      ::= { appcLuPairAdminEntry 7 }
+
+appcLuPairAdminParaSessSup OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Defined Parallel Sessions Supported.
+
+          Indicates whether or not multiple sessions between the partner
+          LU and its associated local LU are permitted.  Parallel session
+          support also indicates that Change Number of Sessions (CNOS)
+          will be used to negotiate session limits between the LUs."
+      ::= { appcLuPairAdminEntry 8 }
+
+-- *********************************************************************
+--    APPC LU Pair Oper Table
+--    Objects in this table contain current operational values, such
+--    as state values or negotiated parameters, for 6.2 LU pairs.
+-- *********************************************************************
+
+appcLuPairOperTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcLuPairOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table of active partner/local LU pairs.  Two entries are
+          present in the table when both LUs in a pair are local."
+      ::= { appcLu 4 }
+
+appcLuPairOperEntry OBJECT-TYPE
+      SYNTAX AppcLuPairOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry representing one partner/local LU pair."
+      INDEX { appcLuPairOperLocLuName,
+              appcLuPairOperParLuName  }
+      ::= { appcLuPairOperTable 1 }
+
+AppcLuPairOperEntry     ::= SEQUENCE {
+    appcLuPairOperLocLuName             DisplayString,
+    appcLuPairOperParLuName             DisplayString,
+    appcLuPairOperParLuAlias            DisplayString,
+    appcLuPairOperSessLimit             Integer32,
+    appcLuPairOperSessSec               INTEGER,
+    appcLuPairOperSecAccept             INTEGER,
+    appcLuPairOperLinkObjId             InstancePointer,
+    appcLuPairOperParaSessSup           INTEGER,
+    appcLuPairOperParaSessSupLS         INTEGER,
+    appcLuPairOperState                 INTEGER
+   }
+
+appcLuPairOperLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU.  This field is from 1 to 17
+          characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present.
+
+          If this object has the same value as appcLluOperName,
+          then the two entries being indexed apply to the same
+          resource (specifically, to the same local LU)."
+      ::= { appcLuPairOperEntry 1 }
+
+appcLuPairOperParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU.
+           This field is from 1 to 17 characters in
+           length, including a period (.) which separates the
+           NetId from the NAU name if the NetId is present."
+      ::= { appcLuPairOperEntry 2 }
+
+appcLuPairOperParLuAlias OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A local alias for the partner LU.  If not known or
+           not applicable, this object contains a zero-length
+           string."
+      ::= { appcLuPairOperEntry 3 }
+
+appcLuPairOperSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of sessions supported by this partner LU."
+      ::= { appcLuPairOperEntry 4 }
+
+appcLuPairOperSessSec OBJECT-TYPE
+      SYNTAX INTEGER {
+                      required(1),
+                      accepted(2),
+                      notAllowed(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the type of security information that a local LU
+          will accept on BIND requests it receives from the partner LU.
+
+          required    -   Specifies that the BIND request must carry
+                          session level verification information that
+                          will be verified upon receipt.
+          accepted    -   Specifies that the BIND request may carry
+                          session level verification information that
+                          will be verified upon receipt.
+          notAllowed  -   Specifies that the BIND request must not carry
+                          session level verification information."
+      ::= { appcLuPairOperEntry 5 }
+
+appcLuPairOperSecAccept OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      conversation(2),
+                      alreadyVerified(3),
+                      persistentVerification(4),
+                      aVandpV(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies support for different levels of security acceptance
+           information in ATTACH requests received from this partner LU.
+
+           Possible values are:
+
+                none    -   No access security information will be
+                            accepted on allocation requests (ATTACH) from
+                            this LU.
+                conversation
+                        -   Allocation requests will not be accepted that
+                            include already verified or persistent
+                            verification indicators.  Accept
+                            conversation-level access security
+                            information, which must include both a user
+                            Id and password, and may also include a
+                            profile.
+                alreadyVerified
+                        -   Allocation requests will be accepted that
+                            include already verified indicators.
+                            Persistent verification indicators will not
+                            be accepted.
+                persistentVerification
+                        -   Allocation requests will be accepted that
+                            include persistent verification indicators.
+                            Already verified indicators will not be
+                            accepted.
+                aVandpV -   Allocation requests will be accepted that
+                            include already verified or persistent
+                            verification indicators."
+      ::= { appcLuPairOperEntry 6 }
+
+appcLuPairOperLinkObjId OBJECT-TYPE
+      SYNTAX InstancePointer
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the link associated with this partner LU.  This
+          value points to the row in the table containing information on
+          the link instance.  (e.g., the sdlcLSAdminTable of the SNA DLC
+          MIB module).  This object may be NULL if the link is not
+          specified or if a link is not applicable (as for APPN-level
+          nodes)."
+      ::= { appcLuPairOperEntry 7 }
+
+appcLuPairOperParaSessSup OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Active Parallel Sessions Supported.
+
+           Indicates whether or not multiple session between the partner
+           LU and its associated local LU are permitted.  Parallel
+           session support also indicates that Change Number of Sessions
+           (CNOS) will be used to negotiate session limits between the
+           LUs."
+      ::= { appcLuPairOperEntry 8 }
+
+appcLuPairOperParaSessSupLS OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Active Parallel Sessions Supported - last starting value.
+
+           This object represents the initial value proposed by the local
+           LU the last time this capability was negotiated, i.e., when
+           the first session was bound between the local LU and its
+           partner."
+      ::= { appcLuPairOperEntry 9 }
+
+appcLuPairOperState OBJECT-TYPE
+      SYNTAX INTEGER {
+                      inactive (1),
+                      active (2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value identifies the current operational state of this LU
+          pair:
+
+                  inactive (1) - no active or pending session exists
+                                 between the LUs.
+                  active (2)   - an active or pending session exists
+
+                                 between the LUs."
+      ::= { appcLuPairOperEntry 10 }
+
+-- *********************************************************************
+--    APPC Mode Admin Table
+--    Objects in this table contain default or expected configuration
+--    values for session modes.
+--    Modes that have active sessions appear in the appcModeOperTable.
+-- *********************************************************************
+appcModeAdminTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcModeAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC Mode Table"
+      ::= { appcLu 5 }
+
+appcModeAdminEntry OBJECT-TYPE
+      SYNTAX AppcModeAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC Mode Information Table."
+      INDEX { appcModeAdminLocLuName,
+              appcModeAdminParLuName,
+              appcModeAdminModeName }
+      ::= { appcModeAdminTable 1 }
+
+AppcModeAdminEntry     ::= SEQUENCE {
+               appcModeAdminLocLuName          DisplayString,
+               appcModeAdminParLuName          DisplayString,
+               appcModeAdminModeName           DisplayString,
+               appcModeAdminCosName            DisplayString,
+               appcModeAdminSessEndTpName      DisplayString,
+               appcModeAdminMaxSessLimit       Integer32,
+               appcModeAdminMinCwinLimit       Integer32,
+               appcModeAdminMinClosLimit       Integer32,
+               appcModeAdminConWinAutoActLmt   Integer32,
+               appcModeAdminRecvPacWinSz       Integer32,
+               appcModeAdminSendPacWinSz       Integer32,
+               appcModeAdminPrefRecvRuSz       Integer32,
+               appcModeAdminPrefSendRuSz       Integer32,
+               appcModeAdminRecvRuSzUpBnd      Integer32,
+               appcModeAdminSendRuSzUpBnd      Integer32,
+               appcModeAdminRecvRuSzLoBnd      Integer32,
+               appcModeAdminSendRuSzLoBnd      Integer32,
+               appcModeAdminSingSessReinit     INTEGER,
+               appcModeAdminCompression        INTEGER,
+               appcModeAdminInBoundCompLevel   INTEGER,
+               appcModeAdminOutBoundCompLevel  INTEGER,
+               appcModeAdminCompRleBeforeLZ    INTEGER,
+               appcModeAdminSyncLvl            INTEGER,
+               appcModeAdminCrypto             INTEGER
+
+                     }
+
+appcModeAdminLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU to which this mode definition
+           applies.  This field is from 1 to 17 characters in length,
+           including a period (.)  which separates the NetId from the
+           NAU name if the NetId is present.
+
+           The reserved value '*ALL' indicates that the mode definition
+           applies to all local LUs for the SNA node identified by
+           appcLocalCpName, and not just to a single local LU."
+      ::= { appcModeAdminEntry 1 }
+
+appcModeAdminParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU to which this mode definition
+           applies.  This field is from 1 to 17 characters in length,
+           including a period (.) which separates the NetId from the
+           NAU name if the NetId is present.
+
+           The reserved value '*ALL' indicates that the mode definition
+           applies to all partner LUs for the SNA node identified by
+           appcModeAdminLocLuName, and not just to a single partner LU."
+      ::= { appcModeAdminEntry 2 }
+
+appcModeAdminModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the mode name. A mode defines the characteristics
+           for a group of sessions. The mode name can be blank (8
+           space characters). "
+      ::= { appcModeAdminEntry 3 }
+
+appcModeAdminCosName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the class of service (COS) name associated with
+           this mode.  If the implementation does not support COS names,
+           a null string is returned."
+      ::= { appcModeAdminEntry 4 }
+
+appcModeAdminSessEndTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the transaction program (TP) to be
+          invoked when a session using this mode is deactivated or ended.
+          If no such TP is defined, this object is a null string.  When
+          the TP name consists entirely of displayable EBCDIC code
+          points, it is mapped directly to the equivalent ASCII display
+          string.  However, registered TP names always have a non-
+          displayable EBCDIC code point (value less than or equal to
+          x'3F') as the first character, so they cannot be directly
+          mapped to an ASCII display string.  These TP names are
+          converted to a display string that is equivalent to a
+          hexadecimal display of the EBCDIC code points.  For example,
+          the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+          ASCII display string '06F1' (including the two single quotes).
+          "
+      ::= { appcModeAdminEntry 5 }
+
+appcModeAdminMaxSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum value that the local LU is to use,
+          during CNOS processing, for the session limit.  The local LU,
+          as a target LU, will negotiate a higher session limit it
+
+          receives in the CNOS request down to this maximum value.  The
+          local LU, as a source LU, will restrict the session limit it
+          sends in a CNOS request to a value less than or equal to this
+          maximum value."
+      ::= { appcModeAdminEntry 6 }
+
+appcModeAdminMinCwinLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the default minimum contention winner sessions
+          limit.  Some implementations internally issue a
+          INITIALIZE_SESSION_LIMIT verb when a Mode is created.  This
+          value is the parameter used for the CNOS processing of that
+          verb.  This parameter is not used when issuing an explicit
+          INITIALIZE_SESSION_LIMIT verb.  The equivalent object in
+          appcCnosCommandTable is used."
+      ::= { appcModeAdminEntry 7 }
+
+appcModeAdminMinClosLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the default minimum contention loser sessions limit.
+          Some implementations internally issue a
+          INITIALIZE_SESSION_LIMIT verb when a Mode is created.  This
+          value is the parameter used for the CNOS processing of that
+          verb.  This is the same as target minimum contention winner
+          sessions.  This parameter is not used when issuing an explicit
+          INITIALIZE_SESSION_LIMIT verb.  The equivalent object in
+          appcCnosCommandTable is used."
+      ::= { appcModeAdminEntry 8 }
+
+appcModeAdminConWinAutoActLmt OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the limit on the number of contention winner
+          sessions to be automatically activated when the minimum number
+          of contention winner sessions increases (as a result of CNOS
+          processing).  The actual number of sessions activated is the
+          lesser of this value and the new minimum number of contention
+          winner sessions.  "
+      ::= { appcModeAdminEntry 9 }
+
+appcModeAdminRecvPacWinSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the size of the receive pacing window. This value is
+           used for negotiation during session activations (SNA BIND).
+
+           The meaning of this value when set to 0 depends on whether
+           adaptive pacing is supported:
+              adaptive pacing        No limit on window size
+              fixed pacing           No pacing is supported"
+      ::= { appcModeAdminEntry 10 }
+
+appcModeAdminSendPacWinSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the size of the send pacing window. This value is
+           used for negotiation during session activations (SNA BIND).
+
+           The meaning of this value when set to 0 depends on whether
+           adaptive pacing is supported:
+              adaptive pacing        No limit on window size
+              fixed pacing           No pacing is supported"
+      ::= { appcModeAdminEntry 11 }
+
+appcModeAdminPrefRecvRuSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the preferred receive RU (Request Unit) size of
+          normal-flow requests on the sessions.  This value must be less
+          than or equal to the value specified in
+          appcModeAdminRecvRuSzUpBnd and greater than or equal to the
+          value specified in appcModeAdminRecvRuSzLoBnd.
+
+           The local LU specifies this value for the receive maximum RU
+           size in session activation (SNA BIND) requests and responses.
+           It will allow negotiation up to the appcModeAdminRecvRuSzUpBnd
+           value or down to the appcModeAdminRecvRuSzLoBnd value."
+      ::= { appcModeAdminEntry 12 }
+
+appcModeAdminPrefSendRuSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the preferred send RU (Request Unit) size of normal-
+          flow requests on the sessions.  This value must be less than or
+          equal to the value specified in appcModeAdminSendRuSzUpBnd and
+          greater than or equal to the value specified in
+          appcModeAdminSendRuSzLoBnd.
+
+           The local LU specifies this value for the send maximum RU
+           size in session activation (SNA BIND) requests and responses.
+           It will allow negotiation up to the appcModeAdminSendRuSzUpBnd
+           value or down to the appcModeAdminSendRuSzLoBnd value."
+      ::= { appcModeAdminEntry 13 }
+
+appcModeAdminRecvRuSzUpBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the upper bound for the maximum receive RU
+           (Request Unit) size of normal-flow requests. This is used
+           for negotiation during session activations (SNA BIND). "
+      ::= { appcModeAdminEntry 14 }
+
+appcModeAdminSendRuSzUpBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the upper bound for the maximum send RU (Request
+          Unit) size of normal-flow requests.  This is used for
+          negotiation during session activations (SNA BIND).  "
+      ::= { appcModeAdminEntry 15 }
+
+appcModeAdminRecvRuSzLoBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the lower bound for the maximum receive RU (Request
+
+          Unit) size of normal-flow requests.  This is used for
+          negotiation during session activations (SNA BIND).  "
+      ::= { appcModeAdminEntry 16 }
+
+appcModeAdminSendRuSzLoBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the lower bound for the maximum send RU (Request
+          Unit) size of normal-flow requests.  This is used for
+          negotiation during session activations (SNA BIND).  "
+      ::= { appcModeAdminEntry 17 }
+
+appcModeAdminSingSessReinit OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notApplicable(1),
+                      operatorControlled(2),
+                      primaryOnly(3),
+                      secondaryOnly(4),
+                      primaryOrSecondary(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the responsibility for session reinitiation of a
+          single session with the partner LU (when the session goes
+          down).  The local LU uses this parameter to specify the session
+          reinitiation responsibility in session activation (SNA BIND)
+          requests and responses.
+
+                notApplicable      - specifies that this parameter has
+                                     no meaning since the value of
+                                     appcLuPairAdminParaSessSup is yes.
+                                     The field in the SNA BIND is
+                                     reserved (set to zero).
+                operatorControlled - specifies that neither LU will
+                                     automatically attempt to reinitiate
+                                     the session.  The operator on either
+                                     side will manually reactivate the
+                                     session.  A contention race (both
+                                     side reinitiating at the same time)
+                                     is won by the LU with the
+                                     lexicographically greater fully-
+                                     qualified LU name.
+                primaryOnly        - specifies that the primary LU will
+
+                                     automatically attempt to reinitiate
+                                     the session.
+                secondaryOnly      - specifies that the secondary LU will
+                                     automatically attempt to reinitiate
+                                     the session.
+                primaryOrSecondary - specifies that either the primary or
+                                     the secondary may automatically
+                                     attempt to reinitiate the session.
+                                     A contention race is handled the
+                                     same way as with operatorControlled.
+          "
+      ::= { appcModeAdminEntry 18 }
+
+appcModeAdminCompression OBJECT-TYPE
+      SYNTAX INTEGER {
+                      prohibited(1),
+                      required(2),
+                      negotiable(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether compression is supported.  The local LU uses
+          this value for negotiation during session activation (SNA
+          BIND).
+
+              prohibited  -  specifies that no compression is to be used.
+              required    -  specifies that compression is required.
+              negotiable  -  specifies that the usage of compression
+                             is to be negotiated between the LUs. The
+                             level of compression is also negotiated."
+      ::= { appcModeAdminEntry 19 }
+
+appcModeAdminInBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          inbound data.  The local LU uses this value in conjunction with
+          appcModeAdminCompression for negotiation during session
+
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcModeAdminEntry 20 }
+
+appcModeAdminOutBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          outbound data.  The local LU uses this value in conjunction
+          with appcModeAdminCompression for negotiation during session
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcModeAdminEntry 21 }
+
+appcModeAdminCompRleBeforeLZ OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether run-length encoding is to be applied to the
+          data before applying Lempel-Ziv-like compression.  The local LU
+          uses this value for negotiation during session activation (SNA
+          BIND).  This parameter is only supported if LZ compression is
+          used."
+      ::= { appcModeAdminEntry 22 }
+
+appcModeAdminSyncLvl OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      noneConfirm(2),
+                      noneConfirmSyncPoint(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the sync level support. This value is used for
+           negotiation during session activations (SNA BIND).
+
+                none                 - No sync level is supported.
+                noneConfirm          - None and Confirm levels supported.
+                noneConfirmSyncPoint - None, Confirm, and Sync Point is
+                                       supported.
+          "
+      ::= { appcModeAdminEntry 23 }
+
+appcModeAdminCrypto OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notSupported(1),
+                      mandatory(2),
+                      selective(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether session-level cryptography is supported.
+           This value is used for negotiation during session activations
+           (SNA BIND).
+                notSupported    -   Specifies session-level cryptography
+                                    is not to be used.
+                mandatory       -   Specifies session-level cryptography
+                                    must be used.
+                selective       -   Specifies session-level cryptography
+                                    is required just on selected requests
+                                    flowing on the sessions."
+      ::= { appcModeAdminEntry 24 }
+
+-- *********************************************************************
+--    APPC Mode Oper Table
+--    Objects in this table contain current operational values, such
+--    as state values or negotiated parameters, for session modes.
+--
+-- *********************************************************************
+appcModeOperTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcModeOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Operational APPC Mode Information.  Two entries are present in
+          the table when both LUs in a pair are local."
+      ::= { appcLu 6 }
+
+appcModeOperEntry OBJECT-TYPE
+      SYNTAX AppcModeOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC mode operational information table.  This entry
+          does not augment the appcModeAdminEntry, but reflects an actual
+          operational mode for a given local LU - partner LU pair."
+      INDEX { appcModeOperLocLuName,
+              appcModeOperParLuName,
+              appcModeOperModeName }
+      ::= { appcModeOperTable 1 }
+
+AppcModeOperEntry     ::= SEQUENCE {
+
+   appcModeOperLocLuName            DisplayString,
+   appcModeOperParLuName            DisplayString,
+   appcModeOperModeName             DisplayString,
+   appcModeOperCosName              DisplayString,
+   appcModeOperSessEndTpName        DisplayString,
+   appcModeOperSessLimit            Integer32,
+   appcModeOperMaxSessLimit         Integer32,
+   appcModeOperMinCwinLimit         Integer32,
+   appcModeOperMinClosLimit         Integer32,
+   appcModeOperConWinAutoActLmt     Integer32,
+   appcModeOperRecvPacWinSz         Integer32,
+   appcModeOperSendPacWinSz         Integer32,
+   appcModeOperPrefRecvRuSz         Integer32,
+   appcModeOperPrefSendRuSz         Integer32,
+   appcModeOperRecvRuSzUpBnd        Integer32,
+   appcModeOperSendRuSzUpBnd        Integer32,
+   appcModeOperRecvRuSzLoBnd        Integer32,
+   appcModeOperSendRuSzLoBnd        Integer32,
+   appcModeOperSingSessReinit       INTEGER,
+   appcModeOperCompression          INTEGER,
+   appcModeOperInBoundCompLevel     INTEGER,
+   appcModeOperOutBoundCompLevel    INTEGER,
+   appcModeOperCompRleBeforeLZ      INTEGER,
+   appcModeOperSyncLvl              INTEGER,
+   appcModeOperCrypto               INTEGER,
+   appcModeOperSyncLvlLastStart     INTEGER,
+   appcModeOperCryptoLastStart      INTEGER,
+   appcModeOperCNOSNeg              INTEGER,
+   appcModeOperActCwin              Gauge32,
+   appcModeOperActClos              Gauge32,
+   appcModeOperPndCwin              Gauge32,
+   appcModeOperPndClos              Gauge32,
+   appcModeOperPtmCwin              Gauge32,
+   appcModeOperPtmClos              Gauge32,
+   appcModeOperDrainSelf            INTEGER,
+   appcModeOperDrainPart            INTEGER
+                     }
+
+appcModeOperLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU.  This field is from 1 to 17
+          characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present.
+
+          If this object has the same value as appcLluOperName,
+          then the two entries being indexed apply to the same
+          resource (specifically, to the same local LU)."
+      ::= { appcModeOperEntry 1 }
+
+appcModeOperParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU.  This field is from 1 to 17
+          characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present.
+
+          If this object has the same value as appcLuPairOperParLuName,
+          then the two entries being indexed apply to the same
+          resource (specifically, to the same partner LU)."
+      ::= { appcModeOperEntry 2 }
+
+appcModeOperModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the mode name. A mode defines the characteristics
+           for a group of sessions. The mode name can be blank (8
+           space characters). "
+      ::= { appcModeOperEntry 3 }
+
+appcModeOperCosName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the class of service (COS) name associated with
+           this mode.  If the implementation does not support COS names,
+           a zero-length string is returned."
+      ::= { appcModeOperEntry 4 }
+
+appcModeOperSessEndTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the transaction program (TP) to be
+          invoked when a session using this mode is deactivated or ended.
+          If the name is NULL, no transaction program is invoked.  When
+          the TP name consists entirely of displayable EBCDIC code
+          points, it is mapped directly to the equivalent ASCII display
+          string.  However, registered TP names always have a non-
+          displayable EBCDIC code point (value less than or equal to
+          x'3F') as the first character, so they cannot be directly
+          mapped to an ASCII display string.  These TP names are
+          converted to a display string that is equivalent to a
+          hexadecimal display of the EBCDIC code points.  For example,
+          the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+          ASCII display string '06F1' (including the two single quotes)."
+      ::= { appcModeOperEntry 5 }
+
+appcModeOperSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the current session limit of this mode as negotiated
+          through APPC CNOS (Change Number of Sessions) processing.
+          Identifies the total number of sessions that can be established
+          between the local and partner LU using this mode."
+      ::= { appcModeOperEntry 6 }
+
+appcModeOperMaxSessLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum value that the local LU is to use,
+          during CNOS processing, for the session limit.  The local LU,
+          as a target LU, will negotiate a higher session limit it
+          receives in the CNOS request down to this maximum value.  The
+          local LU, as a source LU, will restrict the session limit it
+          sends in a CNOS request to a value less than or equal to this
+          maximum value."
+      ::= { appcModeOperEntry 7 }
+
+appcModeOperMinCwinLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the minimum contention winner sessions limit that
+           was negotiated via CNOS processing."
+      ::= { appcModeOperEntry 8 }
+
+appcModeOperMinClosLimit OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the minimum contention loser sessions limit that
+           was negotiated via CNOS processing. This is the same as
+           target minimum contention winner sessions."
+      ::= { appcModeOperEntry 9 }
+
+appcModeOperConWinAutoActLmt OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the limit on the number of contention winner sessions
+          to be automatically activated when the minimum number of
+          contention winner sessions increases (as a result of CNOS
+          processing). The actual number of sessions activated is the
+          lesser of this value and the new minimum number of contention
+          winner sessions. "
+      ::= { appcModeOperEntry 10 }
+
+appcModeOperRecvPacWinSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the size of the receive pacing window. This value is
+           used for negotiation during session activations (SNA BIND).
+
+           The meaning of this value when set to 0 depends on whether
+           adaptive pacing is supported:
+              adaptive pacing   -     No limit on window size
+              fixed pacing      -     No pacing is supported"
+      ::= { appcModeOperEntry 11 }
+
+appcModeOperSendPacWinSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the size of the send pacing window. This value is
+           used for negotiation during session activations (SNA BIND).
+
+           The meaning of this value when set to 0 depends on whether
+           adaptive pacing is supported:
+              adaptive pacing        No limit on window size
+              fixed pacing           No pacing is supported"
+      ::= { appcModeOperEntry 12 }
+
+appcModeOperPrefRecvRuSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the preferred receive RU (Request Unit) size of
+          normal-flow requests on the sessions.  This value must be less
+          than or equal to the value specified in
+          appcModeOperRecvRuSzUpBnd and greater than or equal to the
+          value specified in appcModeOperRecvRuSzLoBnd.
+
+           The local LU specifies this value for the receive maximum RU
+           size in session activation (SNA BIND) requests and responses.
+           It will allow negotiation up to the appcModeOperRecvRuSzUpBnd
+           value or down to the appcModeOperRecvRuSzLoBnd value."
+      ::= { appcModeOperEntry 13 }
+
+appcModeOperPrefSendRuSz OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the preferred send RU (Request Unit) size of normal-
+          flow requests on the sessions.  This value must be less than or
+          equal to the value specified in appcModeOperSendRuSzUpBnd and
+          greater than or equal to the value specified in
+          appcModeOperSendRuSzLoBnd.
+
+           The local LU specifies this value for the send maximum RU
+           size in session activation (SNA BIND) requests and responses.
+           It will allow negotiation up to the appcModeOperSendRuSzUpBnd
+           value or down to the appcModeOperSendRuSzLoBnd value."
+      ::= { appcModeOperEntry 14 }
+
+appcModeOperRecvRuSzUpBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the upper bound for the maximum receive RU
+           (Request Unit) size of normal-flow requests. This is used
+           for negotiation during session activations (SNA BIND). "
+      ::= { appcModeOperEntry 15 }
+
+appcModeOperSendRuSzUpBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the upper bound for the maximum send RU (Request
+          Unit) size of normal-flow requests.  This is used for
+          negotiation during session activations (SNA BIND).  "
+      ::= { appcModeOperEntry 16 }
+
+appcModeOperRecvRuSzLoBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the lower bound for the maximum receive RU
+           (Request Unit) size of normal-flow requests. This is used
+           for negotiation during session activations (SNA BIND). "
+      ::= { appcModeOperEntry 17 }
+
+appcModeOperSendRuSzLoBnd OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the lower bound for the maximum send RU
+           (Request Unit) size of normal-flow requests. This is used
+           for negotiation during session activations (SNA BIND). "
+      ::= { appcModeOperEntry 18 }
+
+appcModeOperSingSessReinit OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notApplicable(1),
+                      operatorControlled(2),
+                      primaryOnly(3),
+                      secondaryOnly(4),
+                      primaryOrSecondary(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the responsibility for session reinitiation of a
+          single session with the partner LU (when the session goes
+          down).  The local LU uses this parameter to specify the session
+          reinitiation responsibility in session activation (SNA BIND)
+          requests and responses.
+
+                notApplicable      - specifies that this parameter has
+                                     no meaning since the value of
+                                     appcLuPairOperParaSessSup is yes.
+                                     The field in the SNA BIND is
+                                     reserved (set to zero).
+                operatorControlled - specifies that neither LU will
+                                     automatically attempt to reinitiate
+                                     the session.  The operator on either
+                                     side will manually reactivate the
+                                     session.  A contention race (both
+                                     side reinitiating at the same time)
+                                     is won by the LU with the
+                                     lexicographically greater fully-
+                                     qualified LU name.
+                primaryOnly        - specifies that the primary LU will
+                                     automatically attempt to reinitiate
+                                     the session.
+                secondaryOnly      - specifies that the secondary LU will
+                                     automatically attempt to reinitiate
+                                     the session.
+                primaryOrSecondary - specifies that either the primary or
+                                     the secondary may automatically
+                                     attempt to reinitiate the session.
+                                     A contention race is handled the
+                                     same way as with operatorControlled.
+          "
+      ::= { appcModeOperEntry 19 }
+
+appcModeOperCompression OBJECT-TYPE
+      SYNTAX INTEGER {
+                      prohibited(1),
+                      required(2),
+                      negotiable(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether compression is supported.  The local LU uses
+          this value for negotiation during session activation (SNA
+          BIND).
+
+              prohibited  -  specifies that no compression is to be used.
+              required    -  specifies that compression is required.
+              negotiable  -  specifies that the usage of compression
+                             is to be negotiated between the LUs. The
+                             level of compression is also negotiated."
+      ::= { appcModeOperEntry 20 }
+
+appcModeOperInBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          inbound data.  The local LU uses this value in conjunction with
+          appcModeOperCompression for negotiation during session
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcModeOperEntry 21 }
+
+appcModeOperOutBoundCompLevel OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      rle(2),
+                      lz9(3),
+                      lz10(4),
+                      lz12(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the maximum level of compression supported for
+          outbound data.  The local LU uses this value in conjunction
+          with appcModeOperCompression for negotiation during session
+          activation (SNA BIND).
+
+              none  -  specifies that no compression is to be used.
+              rle   -  specifies run-length encoding compression
+                       in which a 1 or 2 byte sequence substitution is
+                       used for each repeated run of the same character.
+              lz9   -  specifies Lempel-Ziv-like compression in which
+                       9 bit codes are used to substitute repeated
+                       substrings in the data stream.  These codes are
+                       indices that refer to entries in a common
+                       dictionary generated adaptively at both sender and
+                       receiver as the data flows and compression occurs.
+                       The larger of number bits used for the code, the
+                       more storage space is required for the dictionary,
+                       but the larger the compression ratio.
+              lz10  -  specifies a 10 bit code Lempel-Ziv-like compression.
+              lz12  -  specifies a 12 bit code Lempel-Ziv-like compression."
+      ::= { appcModeOperEntry 22 }
+
+appcModeOperCompRleBeforeLZ OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether run-length encoding is to be applied to the
+          data before applying Lempel-Ziv-like compression.  The local LU
+          uses this value for negotiation during session activation (SNA
+          BIND).  This parameter is only supported if LZ compression is
+          used."
+      ::= { appcModeOperEntry 23 }
+
+appcModeOperSyncLvl OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      noneConfirm(2),
+                      noneConfirmSyncPoint(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the sync level support for sessions involving this
+           LU pair and mode name.
+
+                none             -       No sync level is supported.
+                noneConfirm      -       None and Confirm level supported.
+                noneConfirmSyncPoint -   None, Confirm and Sync Point is
+                                                supported.
+          "
+      ::= { appcModeOperEntry 24 }
+
+appcModeOperCrypto OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notSupported(1),
+                      mandatory(2),
+                      selective(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether session-level cryptography is supported for
+           sessions involving this LU pair and mode name.
+
+                notSupported    -   Specifies session-level cryptography
+                                       is not being used.
+                mandatory       -   Specifies session-level cryptography
+                                       in being used on all requests
+                                       flowing on the sessions.
+                selective       -   Specifies session-level cryptography
+                                       is required just on selected
+                                       requests flowing on the sessions."
+      ::= { appcModeOperEntry 25 }
+
+appcModeOperSyncLvlLastStart OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      noneConfirm(2),
+                      noneConfirmSyncPoint(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the sync level support.  This value represents the
+          initial value proposed by the local LU the last time this
+          capability was negotiated, i.e., when the first session was
+          bound between the local LU and its partner.
+
+                none             -      No sync level is supported.
+                noneConfirm      -      None and Confirm level supported.
+                noneConfirmSyncPoint -  None, Confirm and Sync Point is
+                                            supported.
+          "
+      ::= { appcModeOperEntry 26 }
+
+appcModeOperCryptoLastStart OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notSupported(1),
+                      mandatory(2),
+                      selective(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether session-level cryptography is supported.
+           This value represents the initial value proposed by the local
+           LU the last time this capability was negotiated, i.e., when
+           the first session was bound between the local LU and its
+           partner.
+                notSupported    -   Specifies session-level cryptography
+                                       is not to be used.
+                mandatory       -   Specifies session-level cryptography
+                                       must be used.
+                selective       -   Specifies session-level cryptography
+                                       is required just on selected
+                                       requests flowing on the sessions."
+      ::= { appcModeOperEntry 27 }
+
+appcModeOperCNOSNeg OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether CNOS negotiation is in process.  CNOS
+          negotiation is used to set or change the various session limits
+          for a mode."
+      ::= { appcModeOperEntry 28 }
+
+appcModeOperActCwin OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of active contention winner sessions."
+      ::= { appcModeOperEntry 29 }
+
+appcModeOperActClos OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of active contention loser sessions."
+      ::= { appcModeOperEntry 30 }
+
+appcModeOperPndCwin OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of contention winner sessions that are
+           pending activation."
+      ::= { appcModeOperEntry 31 }
+
+appcModeOperPndClos OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of contention loser sessions that are
+           pending activation."
+      ::= { appcModeOperEntry 32 }
+
+appcModeOperPtmCwin OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of contention winner sessions that are
+           pending termination."
+      ::= { appcModeOperEntry 33 }
+
+appcModeOperPtmClos OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of contention loser sessions that are
+           pending termination."
+      ::= { appcModeOperEntry 34 }
+
+appcModeOperDrainSelf OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the local LU is draining its conversations
+          for this mode.  When a mode session limit is reset (via a CNOS
+          RESET_SESSION_LIMIT request), the local LU could be set to
+          process all queued conversations before deactivating all of the
+          sessions (using the SNA Bracket Initiation Stopped or BIS
+          protocol).  "
+      ::= { appcModeOperEntry 35 }
+
+appcModeOperDrainPart OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the partner LU is draining its conversations
+          for this mode.  When a mode session limit is reset (via a CNOS
+          RESET_SESSION_LIMIT request), the partner LU could be set to
+          process all queued conversations before deactivating all of the
+
+          sessions (using the SNA Bracket Initiation Stop or BIS
+          protocol).  "
+      ::= { appcModeOperEntry 36 }
+
+-- *********************************************************************
+--    APPC TP Admin Table
+--    Objects in this table contain default or expected configuration
+--    values for remotely attachable transaction programs.
+-- *********************************************************************
+appcTpAdminTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcTpAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC Local TP Table"
+      ::= { appcTp 1 }
+
+appcTpAdminEntry OBJECT-TYPE
+      SYNTAX AppcTpAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC Local TP Information Table."
+      INDEX { appcTpAdminLocLuName,
+              appcTpAdminTpName }
+      ::= { appcTpAdminTable 1 }
+
+AppcTpAdminEntry     ::= SEQUENCE {
+       appcTpAdminLocLuName       DisplayString,
+       appcTpAdminTpName          DisplayString,
+       appcTpAdminFileSpec        DisplayString,
+       appcTpAdminStartParm       DisplayString,
+       appcTpAdminTpOperation     INTEGER,
+       appcTpAdminInAttachTimeout Integer32,
+       appcTpAdminRcvAllocTimeout Integer32,
+       appcTpAdminSyncLvl         INTEGER,
+       appcTpAdminInstLmt         Integer32,
+       appcTpAdminStatus          INTEGER,
+       appcTpAdminLongRun         INTEGER,
+       appcTpAdminConvType        INTEGER,
+       appcTpAdminConvDuplex      INTEGER,
+       appcTpAdminConvSecReq      INTEGER,
+       appcTpAdminVerPip          INTEGER,
+       appcTpAdminPipSubNum       Integer32
+
+                     }
+
+appcTpAdminLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU to which this TP definition
+           applies. This field is from 1 to 17 characters in length,
+           including a period (.) which separates the NetId from the NAU
+           name if the NetId is present.
+
+           The reserved value '*ALL' indicates that the TP definition
+           applies to all local LUs, and not just to a single local LU."
+      ::= { appcTpAdminEntry 1 }
+
+appcTpAdminTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..64))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local transaction program name. This name is sent on an
+           ATTACH remote allocation request.
+
+           When the TP name consists entirely of displayable EBCDIC
+           code points, it is mapped directly to the equivalent ASCII
+           display string.  However, registered TP names always have a
+           non-displayable EBCDIC code point (value less than or equal to
+           x'3F') as the first character, so they cannot be directly
+           mapped to an ASCII display string.  These TP names are
+           converted to a display string that is equivalent to a
+           hexadecimal display of the EBCDIC code points.  For example,
+           the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+           ASCII display string '06F1' (including the two single quotes)."
+      ::= { appcTpAdminEntry 2 }
+
+appcTpAdminFileSpec OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..80))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The local file specification of the transaction program.
+          May be a zero-length string if not applicable."
+      ::= { appcTpAdminEntry 3 }
+
+appcTpAdminStartParm OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..128))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A parameter string passed to the transaction program when it
+           is started.  May be a zero-length string if not supported. "
+      ::= { appcTpAdminEntry 4 }
+
+appcTpAdminTpOperation OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),
+                      queuedOperatorStarted(2),
+                      queuedOperatorPreloaded(3),
+                      queuedAmStarted(4),
+                      nonqueuedAmStarted(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies how the program will be started.
+              other - Specifies that the program operation is none of
+                      the methods specified. It may be a
+                      product-specific method.
+
+              queuedOperatorStarted - Specifies that one version of the
+                      program will be run at a time.  If an incoming
+                      attach arrives and the program has not been started
+                      yet, APPC will issue a message to the operator to
+                      start the specified program.  Subsequent attaches
+                      that arrive while the program is active will be
+                      queued.
+
+              queuedOperatorPreloaded - Specifies that one version of the
+                      program will be run at a time.  If an incoming
+                      attach arrives and the program has not been started
+                      yet, the Attach will be rejected.  The APPC attach
+                      manager determines that a TP has started upon
+                      reception of an APPC RECEIVE_ALLOCATE verb, or a
+                      CPI-C Accept_Conversation (CMACCP) or
+                      Specify_Local_TP_Name (CMSLTP) call.  No message is
+                      sent to the operator.  Subsequent attaches that
+                      arrive while the program is active are queued.
+
+              queuedAmStarted - Specifies that one version of the
+                      program will be run at a time and will be started
+                      by the APPC attach manager.  Subsequent attaches
+
+                      that arrive while the program is active will be
+                      queued.
+
+              nonqueuedAmStarted - Specifies that multiple copies of the
+                      program will be run at a time and will be started
+                      by the APPC attach manager."
+      ::= { appcTpAdminEntry 5 }
+
+appcTpAdminInAttachTimeout OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object specifies the number of seconds incoming attaches
+          will be queued waiting for an APPC program to issue a
+          RECEIVE_ALLOCATE verb or for a CPI-C program to issue an
+          Accept_Conversation (CMACCP) call.  This parameter is
+          meaningful only when appcTpAdminTpOperation has one of the
+          following values:
+                     queuedOperatorStarted
+                     queuedOperatorPreloaded
+                     queuedAmStarted
+
+          A value of zero indicates that there is no timeout."
+      ::= { appcTpAdminEntry 6 }
+
+appcTpAdminRcvAllocTimeout OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object specifies the number of seconds an APPC program's
+          RECEIVE_ALLOCATE verb or a CPI-C program's Accept_Conversation
+          (CMACCP) call will wait for an incoming attach to arrive.
+
+          A value of zero indicates that there is no timeout."
+      ::= { appcTpAdminEntry 7 }
+
+appcTpAdminSyncLvl OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      confirm(2),
+                      noneAndConfirm(3),
+                      syncpoint(4),
+                      noneAndSyncpoint(5),
+                      confirmAndSyncpoint(6),
+                      all(7)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the synchronization level or levels that the
+          transaction program supports.  The levels are defined as
+          follows:
+
+               none      - allocation requests indicating a
+                           synchronization level of none are allowed to
+                           start the program.
+               confirm   - allocation requests indicating a
+                           synchronization level of confirm are allowed
+                           to start the program.
+               syncpoint - allocation requests indicating a
+                           synchronization level of sync point are
+                           allowed to start the program."
+      ::= { appcTpAdminEntry 8 }
+
+appcTpAdminInstLmt OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of concurrent instances of this transaction
+           program that will be supported for a local LU.  A value of
+           zero indicates that there is no limit."
+      ::= { appcTpAdminEntry 9 }
+
+appcTpAdminStatus OBJECT-TYPE
+      SYNTAX INTEGER {
+                      enabled(1),
+                      tempDisabled(2),
+                      permDisabled(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the status of the TP relative to starting execution
+          when the local LU receives an allocation (ATTACH) request
+          naming this program.
+
+                enabled         -    the local LU can start the program.
+                tempDisabled    -    the local LU cannot start the
+
+                                     program. The local LU rejects the
+                                     request with an indication that the
+                                     TP is not available but retry is
+                                     possible.
+                permDisabled    -    the local LU cannot start the
+                                     program. The local LU rejects the
+                                     request with an indication that the
+                                     TP is not available and retry is
+                                     not possible."
+      ::= { appcTpAdminEntry 10 }
+
+appcTpAdminLongRun OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this is a long-running transaction program
+          (i.e., one that stays around even after the conversation goes
+          away)."
+      ::= { appcTpAdminEntry 11 }
+
+appcTpAdminConvType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      basic(1),
+                      mapped(2),
+                      basicOrMapped(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the conversation type (basic or mapped) that will be
+          used by the TP.  This value is verified upon receipt of an
+          incoming attach.  The acceptable values are:
+
+                 basic         - Indicates that this transaction program
+                                 supports basic conversations.
+
+                 mapped        - Indicates that this transaction program
+                                 supports mapped conversations.
+
+                 basicOrMapped - Indicates that this transaction program
+                                 supports both basic and mapped
+                                 conversations."
+      ::= { appcTpAdminEntry 12 }
+
+appcTpAdminConvDuplex OBJECT-TYPE
+      SYNTAX INTEGER {
+                      half(1),
+                      full(2),
+                      halfOrFull(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the conversation duplex type (half or full) that
+          will be used by the TP.  This value is verified upon receipt of
+          an incoming attach.  The acceptable values are:
+
+                 half       - Indicates that this transaction program
+                              supports half duplex conversations.
+
+                 full       - Indicates that this transaction program
+                              supports full duplex conversations.
+
+                 halfOrFull - Indicates that this transaction program
+                              supports either half or full duplex
+                              conversations."
+      ::= { appcTpAdminEntry 13 }
+
+appcTpAdminConvSecReq OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether conversation-level security information is
+          required on incoming attaches designating this TP name.
+          Conversation-level security verification is always performed on
+          those requests that include security information.
+
+                 yes - Indicates that conversation-level security
+                       information is required.  ATTACHs designating the
+                       transaction program must carry a user_id and
+                       either a password or an already verified
+                       indicator.
+
+                 no  - Indicates that no security information is
+                       required.  ATTACHs designating the transaction
+
+                       program can omit or include security information."
+      ::= { appcTpAdminEntry 14 }
+
+appcTpAdminVerPip OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the number of PIP (Program Initialization
+           Parameters) subfields should be verified against the number
+           expected (appcTpAdminPipSubNum)."
+      ::= { appcTpAdminEntry 15 }
+
+appcTpAdminPipSubNum OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the number of PIP subfields expected by the TP."
+      ::= { appcTpAdminEntry 16 }
+
+-- *********************************************************************
+-- APPC Active Session Table
+-- ---------------------------------------------------------------------
+-- This table contains information about active APPC sessions.
+-- *********************************************************************
+appcActSessTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcActSessEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table of active APPC sessions.  Two entries are present in the
+          table when both session partners are local."
+      ::= { appcSession 1 }
+
+appcActSessEntry OBJECT-TYPE
+      SYNTAX AppcActSessEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC Session Information Table.  Indexed by LU pair
+          and integer-valued session index."
+      INDEX { appcActSessLocLuName,
+              appcActSessParLuName,
+              appcActSessIndex }
+      ::= { appcActSessTable 1 }
+
+AppcActSessEntry     ::= SEQUENCE {
+      appcActSessLocLuName            DisplayString,
+      appcActSessParLuName            DisplayString,
+      appcActSessIndex                Integer32,
+      appcActSessPcidCpName           DisplayString,
+      appcActSessPcid                 OCTET STRING,
+      appcActSessPluIndicator         INTEGER,
+      appcActSessModeName             DisplayString,
+      appcActSessCosName              DisplayString,
+      appcActSessTransPriority        INTEGER,
+      appcActSessEnhanceSecSup        INTEGER,
+      appcActSessSendPacingType       INTEGER,
+      appcActSessSendRpc              Gauge32,
+      appcActSessSendNxWndwSize       Gauge32,
+      appcActSessRecvPacingType       INTEGER,
+      appcActSessRecvRpc              Gauge32,
+      appcActSessRecvNxWndwSize       Gauge32,
+      appcActSessRscv                 OCTET STRING,
+      appcActSessInUse                INTEGER,
+      appcActSessMaxSndRuSize         INTEGER,
+      appcActSessMaxRcvRuSize         INTEGER,
+      appcActSessSndPacingSize        INTEGER,
+      appcActSessRcvPacingSize        INTEGER,
+      appcActSessOperState            INTEGER,
+      appcActSessUpTime               TimeTicks,
+      appcActSessRtpNceId             OCTET STRING,
+      appcActSessRtpTcid              OCTET STRING,
+      appcActSessLinkIndex            InstancePointer
+                     }
+
+appcActSessLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the local LU for the session.  This
+          field is from 1 to 17 characters in length, including a period
+          (.) which separates the NetId from the NAU name if the NetId is
+
+          present.
+
+          If this object has the same value as appcLluOperName, then the
+          two entries being indexed apply to the same resource
+          (specifically, to the same local LU)."
+      ::= { appcActSessEntry 1 }
+
+appcActSessParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the partner LU for the session.  This
+          field is from 1 to 17 characters in length, including a period
+          (.) which separates the NetId from the NAU name if the NetId is
+          present.
+
+          If this object has the same value as appcLuPairOperParLuName,
+          then the two entries being indexed apply to the same resource
+          (specifically, to the same partner LU)."
+      ::= { appcActSessEntry 2 }
+
+appcActSessIndex OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This value identifies the index of the session, which is
+          unique for this LU pair.  It is recommended that an Agent not
+          reuse the index of a deactivated session for a significant
+          period of time (e.g., one week)."
+      ::= { appcActSessEntry 3 }
+
+appcActSessPcidCpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network-qualified CP name of the node at which the session
+          and PCID originated.  For APPN and LEN nodes, this is either CP
+          name of the APPN node at which the origin LU is located or the
+          CP name of the NN serving the LEN node at which the origin LU
+          is located.  This field is from 3 to 17 characters in length,
+          including a period (.) which separates the NetId from the NAU
+          name.  A null string indicates that the value is unknown."
+      ::= { appcActSessEntry 4 }
+
+appcActSessPcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0|8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The procedure correlation identifier (PCID) of a session.  It
+          is an 8-octet value assigned by the control point providing
+          session services for the primary LU.  A null string indicates
+          that the value is unknown."
+      ::= { appcActSessEntry 5 }
+
+appcActSessPluIndicator OBJECT-TYPE
+      SYNTAX INTEGER {
+                      localLuIsPlu(1),
+                      partnerLuIsPlu(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates which LU is the PLU for this session.  For
+          independent LUs, the PLU (primary LU) is the one that initiated
+          the session (sent BIND), while the SLU (secondary LU) is the
+          one that accepted the session initiation (received BIND).
+
+          The 'local' LU is the one identified by appcLluOperName.
+
+          The 'partner' LU is the one identified by
+          appcLuPairOperParLuName."
+      ::= { appcActSessEntry 6 }
+
+appcActSessModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The mode name used for this session."
+      ::= { appcActSessEntry 7 }
+
+appcActSessCosName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The Class of Service (COS) name used for this session.
+          A null string indicates that the value is unknown."
+      ::= { appcActSessEntry 8 }
+
+appcActSessTransPriority OBJECT-TYPE
+      SYNTAX INTEGER {
+                      unknown(1),
+                      low(2),
+                      medium(3),
+                      high(4),
+                      network(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The transmission priority of this session.
+              1 = unknown priority
+              2 = low priority
+              3 = medium priority
+              4 = high priority
+              5 = network priority
+          "
+      ::= { appcActSessEntry 9 }
+
+appcActSessEnhanceSecSup OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      level1(2),
+                      level2(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Enhanced security supported. Indicates the level of enhanced
+          security support:
+
+             1 = none
+             2 = level 1
+             3 = level 2
+          "
+      ::= { appcActSessEntry 10 }
+
+appcActSessSendPacingType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      fixed(2),
+                      adaptive(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of pacing being used for sending data."
+      ::= { appcActSessEntry 11 }
+
+appcActSessSendRpc OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The send residual pace count.  This represents the number of
+          MUs that can still be sent in the current session window."
+      ::= { appcActSessEntry 12 }
+
+appcActSessSendNxWndwSize OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The size of the next window which will be used to send data."
+      ::= { appcActSessEntry 13 }
+
+appcActSessRecvPacingType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      fixed(2),
+                      adaptive(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of pacing being used for receiving data."
+      ::= { appcActSessEntry 14 }
+
+appcActSessRecvRpc OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The receive residual pace count.  This represents the number
+
+          of MUs that can still be received in the current session
+          window."
+      ::= { appcActSessEntry 15 }
+
+appcActSessRecvNxWndwSize OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The size of the next window which will be used to receive
+          data."
+      ::= { appcActSessEntry 16 }
+appcActSessRscv OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..255))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The route selection control vector (RSCV CV2B) used for this
+          session.  It is present for APPN-level implementations.
+          LEN-level implementations will return a null string.  The
+          internal format of this vector is described in SNA Formats.
+          This object contains an uninterpreted copy of the control
+          vector (including the length and key fields)."
+      ::= { appcActSessEntry 17 }
+
+appcActSessInUse OBJECT-TYPE
+      SYNTAX INTEGER {
+                      no(1),
+                      yes(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the session is currently in use (i.e., in
+           bracket with a conversation)."
+      ::= { appcActSessEntry 18 }
+
+appcActSessMaxSndRuSize OBJECT-TYPE
+      SYNTAX INTEGER (1..8192)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum RU size used on this session for sending RUs."
+      ::= { appcActSessEntry 19 }
+
+appcActSessMaxRcvRuSize OBJECT-TYPE
+      SYNTAX INTEGER (1..8192)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum RU size used on this session for receiving RUs."
+      ::= { appcActSessEntry 20 }
+
+appcActSessSndPacingSize OBJECT-TYPE
+      SYNTAX INTEGER (1..63)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The size of the send pacing window on this session."
+      ::= { appcActSessEntry 21 }
+
+appcActSessRcvPacingSize OBJECT-TYPE
+      SYNTAX INTEGER (1..63)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The size of the receive pacing window on this session."
+      ::= { appcActSessEntry 22 }
+
+appcActSessOperState OBJECT-TYPE
+      SYNTAX INTEGER {
+                      unbound (1),
+                      pendingBind (2),
+                      bound (3),
+                      pendingUnbind (4)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "The value indicates the current operational state of the
+          session.
+
+                  'unbound (1)' - session has been  unbound;
+                        in this state it will be removed from the
+                        session table by the Agent.
+
+                  'pendingBind (2)' - this state has different
+                        meanings for dependent and independent LUs;
+
+                        for dependent LU - waiting for BIND from
+                        the host, for independent LU - waiting for
+                        BIND response.  When a session enters this
+                        state, the corresponding entry in the
+                        session table is created by the Agent.
+
+                  'bound (3)' - session has been successfully bound.
+
+                  'pendingUnbind (4)' - session enters this state
+                        when an UNBIND is sent and before the
+                        rsp(UNBIND) is received.
+
+          Session deactivation:
+
+                  If a session is in the operational state
+                  'bound (3)' then setting the value of this
+                  object to 'unbound (1)' will initiate the
+                  session shutdown.
+
+                  If a session is in the operational state
+                  'pendingBind (2)' then setting the value of this
+                  object to 'unbound (1)' will initiate the session
+                  shutdown.
+
+                  If a session is in the operational state
+                  'pendingUnbind (4)' for an abnormally long period
+                  of time (e.g., three minutes) then setting the value
+                  of this object to 'unbound (1)' will change the
+                  session operational state to 'unbound (1)'. "
+      ::= { appcActSessEntry 23 }
+
+appcActSessUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The length of time the session has been active, measured in
+          hundredths of a second."
+      ::= { appcActSessEntry 24 }
+
+appcActSessRtpNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The local HPR Network Connection Endpoint of the session."
+      ::= { appcActSessEntry 25 }
+
+appcActSessRtpTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0|8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The local RTP connection TCID of the session."
+      ::= { appcActSessEntry 26 }
+
+appcActSessLinkIndex OBJECT-TYPE
+      SYNTAX InstancePointer
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This value identifies the link over which the session passes.
+          This value points to the row in the table containing
+          information on the link instance.  (e.g., the sdlcLSAdminTable
+          of the SNA DLC MIB module).  This object may be NULL if the
+          link is not specified or if a link is not applicable (as for
+          APPN-level nodes)."
+      ::= { appcActSessEntry 27 }
+
+-- ***************************************************************
+-- The following table contains session statistics for APPC sessions.
+-- ***************************************************************
+
+appcSessStatsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcSessStatsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains dynamic statistical information relating
+          to active APPC sessions.  The entries in this table cannot be
+          created by a Management Station.  Two entries are present in
+          the table when both session partners are local.  This table is
+          populated only when the value of appcCntrlOperStat is
+          'active'."
+      ::= { appcSession 2 }
+
+appcSessStatsEntry OBJECT-TYPE
+      SYNTAX AppcSessStatsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Contains statistics information for an APPC session.  Each
+          entry is created by the Agent.  Objects in this table have
+          read-only access.  Each session from appcActSessTable has one
+          entry in this table."
+      INDEX { appcSessStatsLocLuName,
+              appcSessStatsParLuName,
+              appcSessStatsSessIndex }
+      ::= { appcSessStatsTable 1 }
+
+AppcSessStatsEntry ::= SEQUENCE {
+        appcSessStatsLocLuName           DisplayString,
+        appcSessStatsParLuName           DisplayString,
+        appcSessStatsSessIndex           Integer32,
+        appcSessStatsSentFmdBytes        Counter32,
+        appcSessStatsSentNonFmdBytes     Counter32,
+        appcSessStatsRcvdFmdBytes        Counter32,
+        appcSessStatsRcvdNonFmdBytes     Counter32,
+        appcSessStatsSentFmdRus          Counter32,
+        appcSessStatsSentNonFmdRus       Counter32,
+        appcSessStatsRcvdFmdRus          Counter32,
+        appcSessStatsRcvdNonFmdRus       Counter32,
+        appcSessStatsCtrUpTime           TimeTicks
+                     }
+
+appcSessStatsLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the local LU for the session.  This
+          field is from 1 to 17 characters in length, including a period
+          (.) which separates the NetId from the NAU name if the NetId is
+          present.
+
+          If this object has the same value as appcLluOperName, then the
+          two entries being indexed apply to the same resource
+          (specifically, to the same local LU)."
+      ::= { appcSessStatsEntry 1 }
+
+appcSessStatsParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the partner LU for the session.  This
+          field is from 1 to 17 characters in length, including a period
+          (.) which separates the NetId from the NAU name if the NetId is
+          present.
+
+          If this object has the same value as appcLuPairOperParLuName,
+          then the two entries being indexed apply to the same resource
+          (specifically, to the same partner LU)."
+      ::= { appcSessStatsEntry 2 }
+
+appcSessStatsSessIndex OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This value identifies the index of the session, which is
+          unique for this LU pair.  It is recommended that an Agent not
+          reuse the index of a deactivated session for a significant
+          period of time (e.g., one week).
+
+          If this object has the same value as appcActSessIndex for the
+          same LU pair, then the two entries being indexed apply to the
+          same resource (specifically, to the same session)."
+      ::= { appcSessStatsEntry 3 }
+
+appcSessStatsSentFmdBytes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of function management data (FMD) bytes sent by the
+          local LU."
+      ::= { appcSessStatsEntry 4 }
+
+appcSessStatsSentNonFmdBytes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of non-function management data (non-FMD) bytes
+          sent by the local LU."
+      ::= { appcSessStatsEntry 5 }
+
+appcSessStatsRcvdFmdBytes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of function management data (FMD) bytes received by
+          the local LU."
+      ::= { appcSessStatsEntry 6 }
+
+appcSessStatsRcvdNonFmdBytes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of non-function management data (non-FMD) bytes
+          received by the local LU."
+      ::= { appcSessStatsEntry 7 }
+
+appcSessStatsSentFmdRus OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of function management data (FMD) RUs sent by the
+          local LU."
+      ::= { appcSessStatsEntry 8 }
+
+appcSessStatsSentNonFmdRus OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of non-function management data (non-FMD) RUs sent
+          by the local LU."
+      ::= { appcSessStatsEntry 9 }
+
+appcSessStatsRcvdFmdRus OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of function management data (FMD) RUs received by
+          the local LU."
+      ::= { appcSessStatsEntry 10 }
+
+appcSessStatsRcvdNonFmdRus OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of non-function management data (non-FMD) RUs
+          received by the local LU."
+      ::= { appcSessStatsEntry 11 }
+
+appcSessStatsCtrUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The length of time the counters for this session have been
+          active, measured in hundredths of a second."
+      ::= { appcSessStatsEntry 12 }
+
+-- *********************************************************************
+-- APPC Historical Session Table
+-- ---------------------------------------------------------------------
+-- This table contains historical information about APPC sessions that
+-- terminated abnormally.   It is an implementation choice how long to
+-- retain information on a given session.
+-- *********************************************************************
+appcHistSessTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcHistSessEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table of historical information about APPC sessions that
+          terminated abnormally.  Two entries may be present in the table
+          when both session partners are local.  It is an implementation
+          choice how long to retain information about a given session."
+      ::= { appcSession 3 }
+
+appcHistSessEntry OBJECT-TYPE
+      SYNTAX AppcHistSessEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC Session History Table.  This table is indexed by
+          an integer which is continuously incremented until it
+          eventually wraps."
+      INDEX
+             { appcHistSessIndex }
+      ::= { appcHistSessTable 1 }
+
+AppcHistSessEntry     ::= SEQUENCE {
+      appcHistSessIndex           INTEGER,
+      appcHistSessTime            DateAndTime,
+      appcHistSessType            INTEGER,
+      appcHistSessLocLuName       DisplayString,
+      appcHistSessParLuName       DisplayString,
+      appcHistSessModeName        DisplayString,
+      appcHistSessUnbindType      OCTET STRING,
+      appcHistSessSenseData       SnaSenseData,
+      appcHistSessComponentId     DisplayString,
+      appcHistSessDetectModule    DisplayString
+                     }
+
+appcHistSessIndex OBJECT-TYPE
+      SYNTAX INTEGER (0..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table index.  The value of the index begins at zero
+           and is incremented up to a maximum value of 2**31-1
+           (2,147,483,647) before wrapping."
+      ::=  { appcHistSessEntry 1 }
+
+appcHistSessTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time at which the session was either terminated or
+           failed to be established."
+      ::=  { appcHistSessEntry 2 }
+
+appcHistSessType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      recvNegBindRsp(1),
+                      sendNegBindRsp(2),
+                      sessActRejected(3),
+                      unbindSent(4),
+                      unbindReceived(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the type of event that caused the entry to be made:
+
+               recvNegBindRsp  - Received a negative bind response from
+                                 the partner LU.
+               sendNegBindRsp  - Sent a negative bind response to the
+                                 partner LU.
+               sessActRejected - Session activation rejected by the
+                                 partner LU.
+               unbindSent      - Unbind sent to the partner LU.
+               unbindReceived  - Unbind received from the partner LU.
+
+          These event types correspond to the five SNA/MS Alerts
+          LU62001 through LU62005, documented in the SNA Management
+          Services Reference."
+      ::=  { appcHistSessEntry 3 }
+
+appcHistSessLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network-qualified local LU name.  This field is from 3 to
+          17 characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present."
+      ::=  { appcHistSessEntry 4 }
+
+appcHistSessParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network-qualified partner LU name.  This field is from 3
+          to 17 characters in length, including a period (.) which
+          separates the NetId from the NAU name if the NetId is present."
+      ::=  { appcHistSessEntry 5 }
+
+appcHistSessModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The mode name of the session."
+      ::=  { appcHistSessEntry 6 }
+
+appcHistSessUnbindType OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of unbind which terminated the session.  This
+           value is consists of one (1) octet; and its meaning
+           is defined in SNA Formats."
+      ::=  { appcHistSessEntry 7 }
+
+appcHistSessSenseData OBJECT-TYPE
+      SYNTAX SnaSenseData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The sense data associated with the termination of the
+          session, taken from the negative BIND response or UNBIND
+          request."
+      ::=  { appcHistSessEntry 8 }
+
+appcHistSessComponentId OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..32))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The implementation-specific name of the component which
+          detected the problem."
+      ::=  { appcHistSessEntry 9 }
+
+appcHistSessDetectModule OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..32))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The implementation-specific name of the module which
+          detected the problem."
+      ::=  { appcHistSessEntry 10 }
+
+-- *********************************************************************
+-- APPC Session RTP Connection Table
+-- ---------------------------------------------------------------------
+
+-- This table contains information on APPC sessions that are being
+-- transported on RTP connections by High Performance Routing (HPR).
+-- *********************************************************************
+appcSessRtpTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcSessRtpEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "A table indicating how many APPC sessions terminating in this
+          node are transported by each RTP connection."
+      ::= { appcSession 4 }
+
+appcSessRtpEntry OBJECT-TYPE
+      SYNTAX AppcSessRtpEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC session RTP table."
+      INDEX { appcSessRtpNceId,
+              appcSessRtpTcid }
+      ::= { appcSessRtpTable 1 }
+
+AppcSessRtpEntry ::= SEQUENCE {
+      appcSessRtpNceId              OCTET STRING,
+      appcSessRtpTcid               OCTET STRING,
+      appcSessRtpSessions           Gauge32
+                     }
+
+appcSessRtpNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local Network Connection Endpoint of the RTP connection."
+      ::= { appcSessRtpEntry 1 }
+
+appcSessRtpTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local TCID of the RTP connection."
+      ::= { appcSessRtpEntry 2 }
+
+appcSessRtpSessions OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of APPC sessions terminating in this node
+          that are using this RTP connection."
+      ::= { appcSessRtpEntry 3 }
+
+-- *********************************************************************
+--    APPC Active Conversation Table
+--   This table contains information about active APPC conversations.
+-- *********************************************************************
+
+appcActiveConvTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcActiveConvEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table of information about active APPC Conversations.  In this
+          context 'active' means that a conversation is currently
+          associated with a particular session.  Two entries are present
+          in the table when both LUs for the session are local."
+      ::= { appcConversation 1 }
+
+appcActiveConvEntry OBJECT-TYPE
+      SYNTAX AppcActiveConvEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry representing one active APPC Conversation."
+      INDEX { appcActiveConvLocLuName,
+              appcActiveConvParLuName,
+              appcActiveConvSessIndex }
+      ::= { appcActiveConvTable 1}
+
+AppcActiveConvEntry     ::= SEQUENCE {
+           appcActiveConvLocLuName           DisplayString,
+           appcActiveConvParLuName           DisplayString,
+           appcActiveConvSessIndex           Integer32,
+           appcActiveConvId                  OCTET STRING,
+           appcActiveConvState               INTEGER,
+           appcActiveConvType                INTEGER,
+           appcActiveConvCorrelator          OCTET STRING,
+           appcActiveConvSyncLvl             INTEGER,
+           appcActiveConvSource              INTEGER,
+           appcActiveConvDuplex              INTEGER,
+           appcActiveConvUpTime              TimeTicks,
+           appcActiveConvSendBytes           Counter32,
+           appcActiveConvRcvBytes            Counter32,
+           appcActiveConvUserid              DisplayString,
+           appcActiveConvPcidNauName         DisplayString,
+           appcActiveConvPcid                OCTET STRING,
+           appcActiveConvModeName            DisplayString,
+           appcActiveConvLuwIdName           DisplayString,
+           appcActiveConvLuwIdInstance       OCTET STRING,
+           appcActiveConvLuwIdSequence       OCTET STRING,
+           appcActiveConvTpName              DisplayString
+                     }
+
+appcActiveConvLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU for the conversation.  This field
+          is from 1 to 17 characters in length, including a period (.)
+          which separates the NetId from the NAU name if the NetId is
+          present.
+
+          If this object has the same value as appcLluOperName,
+          then the two entries being indexed apply to the same
+          resource (specifically, to the same local LU)."
+      ::= { appcActiveConvEntry 1 }
+
+appcActiveConvParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU for the conversation.  This
+          field is from 1 to 17 characters in length, including a period
+          (.) which separates the NetId from the NAU name if the NetId is
+          present.
+
+          If this object has the same value as appcLuPairOperParLuName,
+          then the two entries being indexed apply to the same
+          resource (specifically, to the same partner LU)."
+      ::= { appcActiveConvEntry 2 }
+
+appcActiveConvSessIndex OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Index of entry in appcActSessTable that is associated with
+          this conversation.  If this object has the same value as
+          appcActSessIndex for the same LU pair, then the two entries
+          being indexed apply to the same resource (specifically, to the
+          same session)."
+      ::= { appcActiveConvEntry 3 }
+
+appcActiveConvId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (4))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The 4-byte ID of the conversation."
+      ::= { appcActiveConvEntry 4 }
+
+appcActiveConvState OBJECT-TYPE
+      SYNTAX INTEGER {
+                      reset(1),
+                      send(2),
+                      receive(3),
+                      confirm(4),
+                      confirmSend(5),
+                      confirmDealloc(6),
+                      pendingDeallocate(7),
+                      pendingPost(8),
+                      sendReceive(9),
+                      sendOnly(10),
+                      receiveOnly(11),
+                      deferReceive(12),
+                      deferDeallocate(13),
+                      syncpoint(14),
+                      syncpointSend(15),
+                      syncpointDeallocate(16),
+                      backoutRequired(17)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the state of the conversation at the instant when
+          the information was retrieved.  The values are:
+
+              reset
+                        The conversation is reset (i.e., deallocated).
+              send
+                        The conversation can send data.  This value also
+                        is returned if the conversation is in
+                        Send-Pending state.
+              receive
+                        The conversation can receive data.
+              confirm
+                        The conversation has received a confirm
+                        indicator.  It can issue an [MC_]CONFIRMED or
+                        [MC_]SEND_ERROR verb to change state.  It will
+                        continue in Receive state if an [MC_]CONFIRMED
+                        verb is issued.
+              confirmSend
+                        The conversation is in Confirm state and changes
+                        to Send state when an [MC_]CONFIRMED verb is
+                        issued.
+              confirmDealloc
+                        The conversation is in Confirm state and becomes
+                        inactive when an [MC_]CONFIRMED verb is issued.
+              pendingDeallocate
+                        The conversation is in Pending-Deallocate state
+                        while it waits for (MC_)DEALLOCATE TYPE
+                        (sync_level) to complete.
+              pendingPost
+                        The conversation is in Pending-Post state while
+                        it waits for the [MC_]RECEIVE_AND_POST verb to
+                        complete its receive function.
+              sendReceive
+                        The full-duplex conversation can send or receive
+                        data.
+              sendOnly
+                        The full-duplex conversation can send data, but
+                        it does not have permission to receive data,
+                        because the partner TP has already deallocated
+                        its side of the conversation.
+              receiveOnly
+                        The full-duplex conversation can receive data,
+                        but it does not have permission to send data,
+                        because it has already deallocated its side of
+                        the conversation.
+              deferReceive
+                        Waiting for a successful SYNCPT verb operation to
+                        go into the receive state.
+              deferDeallocate
+                        Waiting for a successful SYNCPT verb operation to
+                        go into the reset state.
+
+              syncpoint
+                        Need to response to a SYNCPT verb issued.  After
+                        successful operation, the next state will be
+                        receive.
+              syncpointSend
+                        Need to response to a SYNCPT verb issued.  After
+                        successful operation, the next state will be
+                        send.
+              syncpointDeallocate
+                        Need to response to a SYNCPT verb issued.  After
+                        successful operation, the next state will be
+                        reset.
+              backoutRequired
+                        TP must execute a BACKOUT verb to backout the
+                        transaction."
+      ::= { appcActiveConvEntry 5 }
+
+appcActiveConvType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      basic(1),
+                      mapped(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the type of conversation.  The values are:
+
+              basic
+                        Indicates that this conversation supports
+                        basic verbs.
+
+              mapped
+                        Indicates that this conversation supports
+                        mapped verbs."
+      ::= { appcActiveConvEntry 6 }
+
+appcActiveConvCorrelator OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This is an 8-byte identifier that the source LU assigns to the
+          conversation; the source LU is the one that sent the allocation
+          request.  The conversation correlator is included on the
+          allocation request.  The conversation correlator uniquely
+
+          identifies a conversation, from among all conversations,
+          between the local and partner LUs.  It may be used, for
+          example, during problem determination associated with a
+          conversation.  A length of 0 indicates that no conversation
+          correlator is defined."
+      ::= { appcActiveConvEntry 7 }
+
+appcActiveConvSyncLvl OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      confirm(2),
+                      syncpt(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the highest sync level support for the conversation.
+          The values are:
+
+                none
+                        Indicates that no sync-level processing can be
+                        performed on this conversation. The
+                        transaction program does not issue verbs or
+                        recognize any returned parameters
+                        relating to any sync-level function.
+
+                confirm
+                        Indicates that confirmation processing can be
+                        performed on this conversation.  The
+                        transaction program can issue verbs and
+                        recognize returned parameters relating to
+                        confirmation.
+
+                syncpt
+                        Indicates that syncpt and confirmation processing
+                        can be performed on this conversation. The
+                        transaction program can issue verbs and recognize
+                        returned parameters relating to syncpt and
+                        confirmation."
+      ::= { appcActiveConvEntry 8 }
+
+appcActiveConvSource OBJECT-TYPE
+      SYNTAX INTEGER {
+                      localLu(1),
+                      partnerLu(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the local or partner LU is the source of the
+          conversation, that is, which LU started the conversation by
+          sending the allocation request.
+
+               localLu
+                        The local LU is the source of the conversation,
+                        and the partner LU is the target of the
+                        conversation.
+
+               partnerLu
+                        The partner LU is the source of the
+                        conversation, and the local LU is the target of
+                        the conversation."
+      ::= { appcActiveConvEntry 9 }
+
+appcActiveConvDuplex OBJECT-TYPE
+      SYNTAX INTEGER {
+                      half(1),
+                      full(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the conversation duplex style in effect for the
+          conversation.
+
+            half        Indicates that information can be transferred in
+                        both directions, but only in one direction at a
+                        time.
+
+            full        Indicates that information can be transferred in
+                        both directions at the same time."
+      ::= { appcActiveConvEntry 10 }
+
+appcActiveConvUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The length of time since the conversation started, measured in
+          hundredths of a second."
+      ::= { appcActiveConvEntry 11 }
+
+appcActiveConvSendBytes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the number of bytes that was sent on the
+          conversation.  The count includes all SNA RU bytes sent,
+          including those in the FMH-5 (Attach), FMH-7 (Error
+          Description), SIGNAL, LUSTAT, and SNA responses; it does not
+          include SNA TH and RH bytes."
+      ::= { appcActiveConvEntry 12 }
+
+appcActiveConvRcvBytes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the number of bytes that was received on the
+          conversation.  The count includes all SNA RU bytes sent,
+          including those in the FMH-5 (Attach), FMH-7 (Error
+          Description), SIGNAL, LUSTAT, and SNA responses; it does not
+          include SNA TH and RH bytes."
+      ::= { appcActiveConvEntry 13 }
+
+appcActiveConvUserid OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The user ID that the initiating program provided in the
+          incoming attach."
+      ::= { appcActiveConvEntry 14 }
+
+appcActiveConvPcidNauName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network-qualified NAU name of the
+           node at which the session and PCID originated.  For APPN
+           and LEN nodes, this is either CP name of the APPN node at
+           which the origin LU is located or the CP name of the
+           NN serving the LEN node at which the origin LU is
+           located.  This field is from 3 to 17 characters in
+           length, including a period (.) which separates the
+
+           NetId from the NAU name.  A null string indicates
+           that the value is unknown."
+      ::= { appcActiveConvEntry 15 }
+
+appcActiveConvPcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0|8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The procedure correlation identifier (PCID) of the session.
+          It is an 8-octet value assigned by the control point providing
+          session services for the primary LU.  A null string indicates
+          that the value is unknown."
+      ::= { appcActiveConvEntry 16 }
+
+appcActiveConvModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The Mode Name used for this conversation.
+           This is a 1-8 character name."
+      ::= { appcActiveConvEntry 17 }
+
+appcActiveConvLuwIdName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the LU that initiated the logical unit of work
+           that is associated with this active TP. This field is from
+           1 to 17 characters in length, including a period (.) which
+           separates the NetId from the LU name if the NetId is present."
+      ::= { appcActiveConvEntry 18 }
+
+appcActiveConvLuwIdInstance OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..6))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The instance identifier for the logical unit of work."
+      ::= { appcActiveConvEntry 19 }
+
+appcActiveConvLuwIdSequence OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..2))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The sequence identifier for the logical unit of work."
+      ::= { appcActiveConvEntry 20 }
+
+appcActiveConvTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The transaction program name which started this conversation.
+          This name could either be from a FMH5 ATTACH for a remotely
+          started conversation, otherwise it could the name of the local
+          TP if available.
+
+          When the TP name consists entirely of displayable EBCDIC code
+          points, it is mapped directly to the equivalent ASCII display
+          string.  However, registered TP names always have a non-
+          displayable EBCDIC code point (value less than or equal to
+          x'3F') as the first character, so they cannot be directly
+          mapped to an ASCII display string.  These TP names are
+          converted to a display string that is equivalent to a
+          hexadecimal display of the EBCDIC code points.  For example,
+          the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+          ASCII display string '06F1' (including the two single quotes).
+
+          This name is NULL if the conversation is started locally
+          (i.e., not with a FMH5 ATTACH)."
+      ::= { appcActiveConvEntry 21 }
+
+-- *********************************************************************
+--    APPC Historical Conversation Table
+--    This table contains historical information about APPC
+--    conversations that ended abnormally.  It is an implementation
+--    choice how long to retain information on a given conversation.
+-- *********************************************************************
+
+appcHistConvTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcHistConvEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table of historical information about APPC Conversations that
+
+          ended in error.  Possible categories of error conditions that
+          could be saved in this table are:
+
+                - allocation errors,
+                - deallocate abend,
+                - program errors, and
+                - service errors."
+      ::= { appcConversation 2 }
+
+appcHistConvEntry OBJECT-TYPE
+      SYNTAX AppcHistConvEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+           "Entry representing one APPC Conversation."
+      INDEX
+             { appcHistConvIndex  }
+      ::= { appcHistConvTable 1}
+
+AppcHistConvEntry     ::= SEQUENCE {
+      appcHistConvIndex           Integer32,
+      appcHistConvEndTime         DateAndTime,
+      appcHistConvLocLuName       DisplayString,
+      appcHistConvParLuName       DisplayString,
+      appcHistConvTpName          DisplayString,
+      appcHistConvPcidNauName     DisplayString,
+      appcHistConvPcid            OCTET STRING,
+      appcHistConvSenseData       SnaSenseData,
+      appcHistConvLogData         OCTET STRING,
+      appcHistConvEndedBy         INTEGER
+                     }
+
+appcHistConvIndex OBJECT-TYPE
+      SYNTAX Integer32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Index for entry in Conversation table.  This value identifies
+          the unique index of the conversation.  It is recommended that
+          an Agent not reuse the index of a deactivated conversation for
+          a significant period of time (e.g. one week)."
+      ::= { appcHistConvEntry 1 }
+
+appcHistConvEndTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time at which the conversation ended."
+      ::= { appcHistConvEntry 2 }
+
+appcHistConvLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The name of the local LU for this conversation.  This field is
+          from 1 to 17 characters in length, including a period (.) which
+          separates the NetId from the NAU name if the NetId is present."
+      ::= { appcHistConvEntry 3 }
+
+appcHistConvParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU for the conversation.  This
+          field is from 1 to 17 characters in length, including a period
+          (.) which separates the NetId from the NAU name if the NetId is
+          present."
+      ::= { appcHistConvEntry 4 }
+
+appcHistConvTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The transaction program name which started this conversation.
+          This name could either be from a FMH5 ATTACH for a remotely
+          started conversation, otherwise it could the name of the local
+          TP if available.
+
+          When the TP name consists entirely of displayable EBCDIC code
+          points, it is mapped directly to the equivalent ASCII display
+          string.  However, registered TP names always have a non-
+          displayable EBCDIC code point (value less than or equal to
+          x'3F') as the first character, so they cannot be directly
+          mapped to an ASCII display string.  These TP names are
+          converted to a display string that is equivalent to a
+
+          hexadecimal display of the EBCDIC code points.  For example,
+          the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+          ASCII display string '06F1' (including the two single quotes).
+
+          This name is NULL if the conversation is started locally
+          (i.e., not with a FMH5 ATTACH)."
+      ::= { appcHistConvEntry 5 }
+
+appcHistConvPcidNauName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network-qualified NAU name of the
+           node at which the session and PCID originated.  For APPN
+           and LEN nodes, this is either CP name of the APPN node at
+           which the origin LU is located or the CP name of the
+           NN serving the LEN node at which the origin LU is
+           located.  This field is from 3 to 17 characters in
+           length, including a period (.) which separates the
+           NetId from the NAU name.  A null string indicates that the
+           value is unknown."
+      ::= { appcHistConvEntry 6 }
+
+appcHistConvPcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0|8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+         "The procedure correlation identifier (PCID) of the session.
+         It is an 8-octet value assigned by the control point providing
+         session services for the primary LU.  A null string indicates
+         that the value is unknown."
+      ::= { appcHistConvEntry 7 }
+
+appcHistConvSenseData OBJECT-TYPE
+      SYNTAX SnaSenseData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The sense data associated with the action that ended this
+          conversation, e.g., FMH-7 or UNBIND."
+      ::= { appcHistConvEntry 8 }
+
+appcHistConvLogData OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..32))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The first 32 bytes of the data portion of the Log Data GDS
+          Variable that is associated with the last FMH-7 that occurred
+          on this conversation.  If there was no Log Data GDS Variable
+          associated with the FMH-7, this object is null.
+
+          This object reflects only the data portion of the Log Data
+          GDS Variable (i.e. not the LL or GDS Id)."
+      ::= { appcHistConvEntry 9 }
+
+appcHistConvEndedBy OBJECT-TYPE
+      SYNTAX INTEGER {
+                      localLu(1),
+                      partnerLu(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates which LU ended the conversation."
+      ::= { appcHistConvEntry 10 }
+
+-- *********************************************************************
+--    APPC CPIC Admin Table
+--    Objects in this table contain default or expected configuration
+--    values for CPI-C side information.
+-- *********************************************************************
+appcCpicAdminTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcCpicAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC CPI-C side information table."
+      ::= { appcCPIC 1 }
+
+appcCpicAdminEntry OBJECT-TYPE
+      SYNTAX AppcCpicAdminEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC CPI-C side information Table."
+      INDEX { appcCpicAdminLocLuName,
+              appcCpicAdminSymbDestName }
+      ::= { appcCpicAdminTable 1 }
+
+AppcCpicAdminEntry ::= SEQUENCE {
+          appcCpicAdminLocLuName          DisplayString,
+          appcCpicAdminSymbDestName       DisplayString,
+          appcCpicAdminParLuAlias         DisplayString,
+          appcCpicAdminParLuName          DisplayString,
+          appcCpicAdminModeName           DisplayString,
+          appcCpicAdminTpNameType         INTEGER,
+          appcCpicAdminTpName             DisplayString,
+          appcCpicAdminUserid             DisplayString,
+          appcCpicAdminSecurity           INTEGER
+                     }
+
+appcCpicAdminLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU to which this CPI-C side
+          information definition applies.  This field is from 1 to 17
+          characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present.
+
+          The reserved value '*ALL' indicates that the definition applies
+          to all local LUs, and not just to a single local LU."
+      ::= { appcCpicAdminEntry 1 }
+
+appcCpicAdminSymbDestName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the symbolic destination name used by CPI-C
+          applications to identify this definition."
+      ::= { appcCpicAdminEntry 2 }
+
+appcCpicAdminParLuAlias OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A local alias for the partner LU.  If not known or
+
+           not applicable, this object contains a zero-length
+           string."
+      ::= { appcCpicAdminEntry 3 }
+
+appcCpicAdminParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU.  This field is from 1 to 17
+          characters in length, including a period (.)  which separates
+          the NetId from the NAU name if the NetId is present."
+      ::= { appcCpicAdminEntry 4 }
+
+appcCpicAdminModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the mode name.  A mode defines the characteristics
+          for a group of sessions.  The mode name can be blank (8 space
+          characters)."
+      ::= { appcCpicAdminEntry 5 }
+
+appcCpicAdminTpNameType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      normal(1),
+                      snaServiceTp(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the TP name in appcCpicAdminTpName
+          identifies a normal TP or an SNA service TP.  In this context,
+          a normal TP is one with a name consisting only of displayable
+          characters, while an SNA service TP has a name containing
+          octets that do not map to displayable characters."
+      ::= { appcCpicAdminEntry 6 }
+
+appcCpicAdminTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the partner TP to be used when a CPI-C
+           application initiates a conversation specifying this side
+           information entry.
+
+           Display convention
+
+              When the TP name consists entirely of displayable EBCDIC
+              code points, it is mapped directly to the equivalent ASCII
+              display string.  However, registered TP names always have a
+              non-displayable EBCDIC code point (value less than or equal
+              to x'3F') as the first character, so they cannot be
+              directly mapped to an ASCII display string.  These TP names
+              are converted to a display string that is equivalent to a
+              hexadecimal display of the EBCDIC code points.  For
+              example, the 2-byte TP name x'06F1' (CNOS) is converted to
+              the 6-byte ASCII display string '06F1' (including the two
+              single quotes)."
+      ::= { appcCpicAdminEntry 7 }
+
+appcCpicAdminUserid OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The security userid, if any, associated with the side
+          information definition."
+      ::= { appcCpicAdminEntry 8 }
+
+appcCpicAdminSecurity OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      same(2),
+                      pgm(3),
+                      pgmStrong(4),
+                      distributed(5),
+                      mutual(6)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the security information to be used for allocating
+          the conversation.
+
+            none        - No security information.
+            same        - Use the security environment currently
+                          associated with this TP.
+            pgm         - Use the program-supplied user_id and password.
+            pgmStrong   - Use the program-supplied user_id and password.
+                          The local LU will insure that the password is
+                          not exposed in clear-text form on the physical
+                          network.
+            distributed - Use the security environment and a distributed
+                          security system to generate the authentication
+                          information for this request.  If distributed
+                          security tokens cannot be generated, then fail
+                          the conversation.
+            mutual      - Authenticate both the user to the destination
+                          system and the destination system to the user."
+      ::= { appcCpicAdminEntry 9 }
+
+-- *********************************************************************
+--    APPC CPIC Oper Table
+--    Objects in this table contain current operational values, such
+--    as state values or negotiated parameters, for CPI-C side
+--    information.
+-- *********************************************************************
+
+appcCpicOperTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppcCpicOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPC CPI-C side information operational table."
+      ::= { appcCPIC 2 }
+
+appcCpicOperEntry OBJECT-TYPE
+      SYNTAX AppcCpicOperEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of APPC CPI-C side information Table."
+      INDEX { appcCpicOperLocLuName,
+              appcCpicOperSymbDestName }
+      ::= { appcCpicOperTable 1 }
+
+AppcCpicOperEntry ::= SEQUENCE {
+          appcCpicOperLocLuName          DisplayString,
+          appcCpicOperSymbDestName       DisplayString,
+          appcCpicOperParLuAlias         DisplayString,
+          appcCpicOperParLuName          DisplayString,
+          appcCpicOperModeName           DisplayString,
+          appcCpicOperTpNameType         INTEGER,
+          appcCpicOperTpName             DisplayString,
+          appcCpicOperUserid             DisplayString,
+          appcCpicOperSecurity           INTEGER
+                     }
+
+appcCpicOperLocLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the local LU to which this CPI-C side
+          information definition applies.  This field is from 1 to 17
+          characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present.
+
+          The reserved value '*ALL' indicates that the definition applies
+          to all local LUs, and not just to a single local LU."
+      ::= { appcCpicOperEntry 1 }
+
+appcCpicOperSymbDestName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Specifies the symbolic destination name used by CPI-C
+          applications to identify this definition."
+      ::= { appcCpicOperEntry 2 }
+
+appcCpicOperParLuAlias OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A local alias for the partner LU.  If not known or not
+          applicable, this object contains a zero-length string."
+      ::= { appcCpicOperEntry 3 }
+
+appcCpicOperParLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the partner LU.  This field is from 1 to 17
+          characters in length, including a period (.) which separates
+          the NetId from the NAU name if the NetId is present."
+      ::= { appcCpicOperEntry 4 }
+
+appcCpicOperModeName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the mode name.  A mode defines the characteristics
+          for a group of sessions.  The mode name can be blank (8 space
+          characters)."
+      ::= { appcCpicOperEntry 5 }
+
+appcCpicOperTpNameType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      normal(1),
+                      snaServiceTp(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies whether the TP name in appcCpicOperTpName identifies
+          a normal TP or an SNA service TP.  In this context, a normal TP
+          is one with a name consisting only of displayable characters,
+          while an SNA service TP has a name containing octets that do
+          not map to displayable characters."
+      ::= { appcCpicOperEntry 6 }
+
+appcCpicOperTpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the name of the partner TP to be used when a CPI-C
+          application initiates a conversation specifying this side
+          information entry.
+
+          Display convention
+
+              When the TP name consists entirely of displayable EBCDIC
+              code points, it is mapped directly to the equivalent ASCII
+              display string.  However, registered TP names always have
+              a non-displayable EBCDIC code point (value less than or
+              equal to x'3F') as the first character, so they cannot be
+              directly mapped to an ASCII display string.  These TP
+              names are converted to a display string that is equivalent
+              to a hexadecimal display of the EBCDIC code points.  For
+              example, the 2-byte TP name x'06F1' (CNOS) is converted to
+              the 6-byte ASCII display string '06F1' (including the two
+              single quotes)."
+      ::= { appcCpicOperEntry 7 }
+
+appcCpicOperUserid OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The security userid, if any, associated with the active side
+          information definition."
+      ::= { appcCpicOperEntry 8 }
+
+appcCpicOperSecurity OBJECT-TYPE
+      SYNTAX INTEGER {
+                      none(1),
+                      same(2),
+                      pgm(3),
+                      pgmStrong(4),
+                      distributed(5),
+                      mutual(6)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the security information to be used for allocating
+          the conversation.
+
+            none        - No security information.
+            same        - Use the security environment currently
+                          associated with this TP.
+            pgm         - Use the program-supplied user_id and password.
+            pgmStrong   - Use the program-supplied user_id and password.
+                          The local LU will insure that the password is
+                          not exposed in clear-text form on the physical
+
+                          network.
+            distributed - Use the security environment and a distributed
+                          security system to generate the authentication
+                          information for this request.  If distributed
+                          security tokens cannot be generated, then fail
+                          the conversation.
+            mutual      - Authenticate both the user to the destination
+                          system and the destination system to the user."
+      ::= { appcCpicOperEntry 9 }
+
+-- ***************************************************************
+-- Conformance information
+-- ***************************************************************
+
+appcConformance       OBJECT IDENTIFIER ::= {appcMIB 2 }
+
+appcCompliances       OBJECT IDENTIFIER ::= {appcConformance 1 }
+appcGroups            OBJECT IDENTIFIER ::= {appcConformance 2 }
+
+-- Compliance statements
+appcCompliance  MODULE-COMPLIANCE
+      STATUS current
+      DESCRIPTION
+          "The compliance statement for the SNMPv2 entities which
+          implement the APPC MIB."
+
+      MODULE  -- this module
+
+--    Unconditionally mandatory groups
+      MANDATORY-GROUPS  {
+                        appcGlobalConfGroup,
+                        appcLluConfGroup,
+                        appcParLuConfGroup,
+                        appcModeConfGroup,
+                        appcTpConfGroup,
+                        appcSessionConfGroup
+                }
+
+--    Conditionally mandatory groups
+      GROUP  appcControlConfGroup
+        DESCRIPTION
+            "The appcControlConfGroup is mandatory only for those
+            entities which implement activation and deactivation of
+            specific controls such as statistics collecting and
+            counting."
+
+      GROUP  appcCnosConfGroup
+        DESCRIPTION
+            "The appcCnosConfGroup is mandatory only for those entities
+            which implement CNOS.  "
+
+      GROUP  appcCpicConfGroup
+        DESCRIPTION
+            "The appcCpicConfGroup is mandatory only for those entities
+            which implement CPI-C.  "
+
+      GROUP  appcConversationConfGroup
+        DESCRIPTION
+            "The appcConversationConfGroup is mandatory only for those
+            entities which implement session endpoints for non-control
+            APPC sessions."
+
+--    MIN-ACCESS for objects
+        OBJECT appcActSessOperState
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "An implementation is not required to support session
+            deactivation via this object."
+      ::= {appcCompliances 1 }
+
+-- Units of conformance
+appcGlobalConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcUpTime,
+                appcDefaultModeName,
+                appcDefaultLuName,
+                appcDefaultImplInbndPlu,
+                appcDefaultMaxMcLlSndSize,
+                appcDefaultFileSpec,
+                appcDefaultTpOperation,
+                appcDefaultTpConvSecRqd,
+                appcLocalCpName,
+                appcActiveSessions,
+                appcActiveHprSessions
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          global information and defaults."
+      ::= { appcGroups 1 }
+
+appcLluConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcLluAdminDepType,
+                appcLluAdminLocalAddress,
+                appcLluAdminSessLimit,
+                appcLluAdminBindRspMayQ,
+                appcLluAdminCompression,
+                appcLluAdminInBoundCompLevel,
+                appcLluAdminOutBoundCompLevel,
+                appcLluAdminCompRleBeforeLZ,
+                appcLluAdminAlias,
+                appcLluOperDepType,
+                appcLluOperLocalAddress,
+                appcLluOperSessLimit,
+                appcLluOperBindRspMayQ,
+                appcLluOperCompression,
+                appcLluOperInBoundCompLevel,
+                appcLluOperOutBoundCompLevel,
+                appcLluOperCompRleBeforeLZ,
+                appcLluOperAlias,
+                appcLluOperActiveSessions
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          local LU6.2s."
+      ::= { appcGroups 2 }
+
+appcParLuConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcLuPairAdminParLuAlias,
+                appcLuPairAdminSessLimit,
+                appcLuPairAdminSessSec,
+                appcLuPairAdminSecAccept,
+                appcLuPairAdminLinkObjId,
+                appcLuPairAdminParaSessSup,
+                appcLuPairOperParLuAlias,
+                appcLuPairOperSessLimit,
+                appcLuPairOperSessSec,
+                appcLuPairOperSecAccept,
+                appcLuPairOperLinkObjId,
+                appcLuPairOperParaSessSup,
+                appcLuPairOperParaSessSupLS,
+                appcLuPairOperState
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          partner LUs."
+      ::= { appcGroups 3 }
+
+appcModeConfGroup OBJECT-GROUP
+      OBJECTS  {
+               appcModeAdminCosName,
+               appcModeAdminSessEndTpName,
+               appcModeAdminMaxSessLimit,
+               appcModeAdminMinCwinLimit,
+               appcModeAdminMinClosLimit,
+               appcModeAdminConWinAutoActLmt,
+               appcModeAdminRecvPacWinSz,
+               appcModeAdminSendPacWinSz,
+               appcModeAdminPrefRecvRuSz,
+               appcModeAdminPrefSendRuSz,
+               appcModeAdminRecvRuSzUpBnd,
+               appcModeAdminSendRuSzUpBnd,
+               appcModeAdminRecvRuSzLoBnd,
+               appcModeAdminSendRuSzLoBnd,
+               appcModeAdminSingSessReinit,
+               appcModeAdminCompression,
+               appcModeAdminInBoundCompLevel,
+               appcModeAdminOutBoundCompLevel,
+               appcModeAdminCompRleBeforeLZ,
+               appcModeAdminSyncLvl,
+               appcModeAdminCrypto,
+               appcModeOperCosName,
+               appcModeOperSessEndTpName,
+               appcModeOperSessLimit,
+               appcModeOperMaxSessLimit,
+               appcModeOperMinCwinLimit,
+               appcModeOperMinClosLimit,
+               appcModeOperConWinAutoActLmt,
+               appcModeOperRecvPacWinSz,
+               appcModeOperSendPacWinSz,
+               appcModeOperPrefRecvRuSz,
+               appcModeOperPrefSendRuSz,
+               appcModeOperRecvRuSzUpBnd,
+               appcModeOperSendRuSzUpBnd,
+               appcModeOperRecvRuSzLoBnd,
+               appcModeOperSendRuSzLoBnd,
+               appcModeOperSingSessReinit,
+               appcModeOperCompression,
+               appcModeOperInBoundCompLevel,
+               appcModeOperOutBoundCompLevel,
+               appcModeOperCompRleBeforeLZ,
+               appcModeOperSyncLvl,
+               appcModeOperCrypto,
+               appcModeOperSyncLvlLastStart,
+               appcModeOperCryptoLastStart,
+               appcModeOperCNOSNeg,
+               appcModeOperActCwin,
+               appcModeOperActClos,
+               appcModeOperPndCwin,
+               appcModeOperPndClos,
+               appcModeOperPtmCwin,
+               appcModeOperPtmClos,
+               appcModeOperDrainSelf,
+               appcModeOperDrainPart
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          modes."
+      ::= { appcGroups 4 }
+
+appcTpConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcTpAdminFileSpec,
+                appcTpAdminStartParm,
+                appcTpAdminTpOperation,
+                appcTpAdminInAttachTimeout,
+                appcTpAdminRcvAllocTimeout,
+                appcTpAdminSyncLvl,
+                appcTpAdminInstLmt,
+                appcTpAdminStatus,
+                appcTpAdminLongRun,
+                appcTpAdminConvType,
+                appcTpAdminConvDuplex,
+                appcTpAdminConvSecReq,
+                appcTpAdminVerPip,
+                appcTpAdminPipSubNum
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          Transaction Programs."
+      ::= { appcGroups 5 }
+
+appcSessionConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcActSessPcidCpName,
+                appcActSessPcid,
+                appcActSessPluIndicator,
+                appcActSessModeName,
+                appcActSessCosName,
+                appcActSessTransPriority,
+                appcActSessEnhanceSecSup,
+                appcActSessSendPacingType,
+                appcActSessSendRpc,
+                appcActSessSendNxWndwSize,
+                appcActSessRecvPacingType,
+                appcActSessRecvRpc,
+                appcActSessRecvNxWndwSize,
+                appcActSessRscv,
+                appcActSessInUse,
+                appcActSessMaxSndRuSize,
+                appcActSessMaxRcvRuSize,
+                appcActSessSndPacingSize,
+                appcActSessRcvPacingSize,
+                appcActSessOperState,
+                appcActSessUpTime,
+                appcActSessRtpNceId,
+                appcActSessRtpTcid,
+                appcActSessLinkIndex,
+                appcSessStatsSentFmdBytes,
+                appcSessStatsSentNonFmdBytes,
+                appcSessStatsRcvdFmdBytes,
+                appcSessStatsRcvdNonFmdBytes,
+                appcSessStatsSentFmdRus,
+                appcSessStatsSentNonFmdRus,
+                appcSessStatsRcvdFmdRus,
+                appcSessStatsRcvdNonFmdRus,
+                appcSessStatsCtrUpTime,
+                appcHistSessTime,
+                appcHistSessType,
+                appcHistSessLocLuName,
+                appcHistSessParLuName,
+                appcHistSessModeName,
+                appcHistSessUnbindType,
+                appcHistSessSenseData,
+                appcHistSessComponentId,
+                appcHistSessDetectModule,
+                appcSessRtpSessions
+
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          LU6.2 sessions."
+      ::= { appcGroups 6 }
+
+appcControlConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcCntrlAdminStat,
+                appcCntrlAdminRscv,
+                appcCntrlAdminTrace,
+                appcCntrlAdminTraceParm,
+                appcCntrlOperStat,
+                appcCntrlOperStatTime,
+                appcCntrlOperRscv,
+                appcCntrlOperRscvTime,
+                appcCntrlOperTrace,
+                appcCntrlOperTraceTime,
+                appcCntrlOperTraceParm
+
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          control."
+      ::= { appcGroups 7 }
+
+appcCnosConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcCnosCommand,
+                appcCnosMaxSessLimit,
+                appcCnosMinCwinLimit,
+                appcCnosMinClosLimit,
+                appcCnosDrainSelf,
+                appcCnosDrainPart,
+                appcCnosResponsible,
+                appcCnosForce,
+                appcCnosTargetLocLuName,
+                appcCnosTargetParLuName,
+                appcCnosTargetModeName
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          CNOS processing."
+      ::= { appcGroups 8 }
+
+appcCpicConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcCpicAdminParLuAlias,
+                appcCpicAdminParLuName,
+                appcCpicAdminModeName,
+                appcCpicAdminTpNameType,
+                appcCpicAdminTpName,
+                appcCpicAdminUserid,
+                appcCpicAdminSecurity,
+                appcCpicOperParLuAlias,
+                appcCpicOperParLuName,
+                appcCpicOperModeName,
+                appcCpicOperTpNameType,
+                appcCpicOperTpName,
+                appcCpicOperUserid,
+                appcCpicOperSecurity
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          CPI-C side information."
+      ::= { appcGroups 9 }
+
+appcConversationConfGroup OBJECT-GROUP
+      OBJECTS  {
+                appcActiveConvId,
+                appcActiveConvState,
+                appcActiveConvType,
+                appcActiveConvCorrelator,
+                appcActiveConvSyncLvl,
+                appcActiveConvSource,
+                appcActiveConvDuplex,
+                appcActiveConvUpTime,
+                appcActiveConvSendBytes,
+                appcActiveConvRcvBytes,
+                appcActiveConvUserid,
+                appcActiveConvPcidNauName,
+                appcActiveConvPcid,
+                appcActiveConvModeName,
+                appcActiveConvLuwIdName,
+                appcActiveConvLuwIdInstance,
+                appcActiveConvLuwIdSequence,
+                appcActiveConvTpName,
+                appcHistConvEndTime,
+                appcHistConvLocLuName,
+                appcHistConvParLuName,
+                appcHistConvTpName,
+                appcHistConvPcidNauName,
+                appcHistConvPcid,
+                appcHistConvSenseData,
+                appcHistConvLogData,
+                appcHistConvEndedBy
+                }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of APPC
+          conversations."
+      ::= { appcGroups 10 }
+
+-- end of conformance statement
+
+END
diff --git a/snmp_builder/mibs/APPLETALK-MIB.mib b/snmp_builder/mibs/APPLETALK-MIB.mib
new file mode 100644
index 0000000..86639e7
--- /dev/null
+++ b/snmp_builder/mibs/APPLETALK-MIB.mib
@@ -0,0 +1,3398 @@
+APPLETALK-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Counter, IpAddress, TimeTicks
+        FROM RFC1155-SMI
+    DisplayString, mib-2
+        FROM RFC1213-MIB
+    OBJECT-TYPE
+        FROM RFC-1212;
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in RFC-1212.
+
+--  The following reference is used in this MIB:
+--  [Inside AppleTalk]
+--  This refers to Gursharan S. Sidhu, Richard F. Andrews, and
+--  Alan B. Oppenheimer, Inside AppleTalk, Second Edition,
+--  Addison Wesley, (1990).
+
+--  AppleTalk MIB
+
+    appletalk    OBJECT IDENTIFIER ::= { mib-2 13 }
+
+        ATNetworkNumber ::=         -- 2 octets of net number
+                                    -- in network byte order
+                OCTET STRING (SIZE (2))
+
+        DdpNodeAddress ::=          -- 2 octets of net number
+                                    -- in network byte order,
+                                    -- 1 octet of node number
+                OCTET STRING (SIZE (3))
+
+        DdpSocketAddress ::=        -- 2 octets of net number
+                                    -- in network byte order,
+                                    -- 1 octet of node number,
+                                    -- 1 octet of socket number
+                                    -- (0..255)
+                OCTET STRING (SIZE (4))
+
+        ATName ::=              -- 0 to 32 octets of AppleTalk
+                                    -- ASCII [Inside AppleTalk]
+                OCTET STRING (SIZE (0..32))
+
+    llap         OBJECT IDENTIFIER ::= { appletalk 1 }
+    aarp         OBJECT IDENTIFIER ::= { appletalk 2 }
+    atport       OBJECT IDENTIFIER ::= { appletalk 3 }
+    ddp          OBJECT IDENTIFIER ::= { appletalk 4 }
+    rtmp         OBJECT IDENTIFIER ::= { appletalk 5 }
+    kip          OBJECT IDENTIFIER ::= { appletalk 6 }
+    zipRouter    OBJECT IDENTIFIER ::= { appletalk 7 }
+    nbp          OBJECT IDENTIFIER ::= { appletalk 8 }
+    atecho       OBJECT IDENTIFIER ::= { appletalk 9 }
+    atp          OBJECT IDENTIFIER ::= { appletalk 10 }
+    pap          OBJECT IDENTIFIER ::= { appletalk 11 }
+    asp          OBJECT IDENTIFIER ::= { appletalk 12 }
+    adsp         OBJECT IDENTIFIER ::= { appletalk 13 }
+    atportptop   OBJECT IDENTIFIER ::= { appletalk 14 }
+    rtmpStub     OBJECT IDENTIFIER ::= { appletalk 16 }
+    zipEndNode   OBJECT IDENTIFIER ::= { appletalk 17 }
+    perPort  OBJECT IDENTIFIER ::= { appletalk 18 }
+
+-- The LLAP Group
+--
+-- Implementation of this group is mandatory for all
+-- entities that implement LLAP
+--
+-- Notes for the interfaces group
+--
+-- When implementing the Interfaces Group of MIB-II, it is
+-- suggested that the following values be used for any
+-- LocalTalk interfaces:
+--  ifMtu: 600
+--  ifSpeed: 230000
+--  ifPhysAddress: the one octet node number for the
+--      particular interface
+--
+-- Note also that LLAP control packets should not be
+-- included in the Interfaces Group packet or octet
+-- counters.
+
+llapTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF LlapEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The list of LLAP entries."
+    ::= { llap 1 }
+
+llapEntry OBJECT-TYPE
+    SYNTAX LlapEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "An LLAP entry containing objects for the LocalTalk
+        Link Access Protocol for a particular LocalTalk
+        interface.
+
+        As an example, an instance of the llapOutPkts object
+        might be named llapOutPks.1"
+    INDEX { llapIfIndex }
+    ::= { llapTable 1 }
+
+LlapEntry ::= SEQUENCE {
+    llapIfIndex             INTEGER,
+    llapInPkts              Counter,
+    llapOutPkts             Counter,
+    llapInNoHandlers        Counter,
+    llapInLengthErrors      Counter,
+    llapInErrors            Counter,
+    llapCollisions          Counter,
+    llapDefers              Counter,
+    llapNoDataErrors        Counter,
+    llapRandomCTSErrors     Counter,
+    llapFCSErrors           Counter
+}
+
+llapIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The LLAP interface to which this entry pertains.
+        The interface identified by a particular value of
+        this index is the same interface as identified
+        by the same value of ifIndex."
+    ::= { llapEntry 1 }
+
+-- this object has been deprecated because it duplicates the
+-- sum of the MIB-II variables ifInUcastPkts and
+-- ifInNUcastPkts
+
+llapInPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS deprecated
+    DESCRIPTION
+        "The total number of good data packets received on
+        this LocalTalk interface."
+    ::= { llapEntry 2 }
+
+-- this object has been deprecated because it duplicates the
+-- sum of the MIB-II variables ifOutUcastPkts and
+-- ifOutNUcastPkts
+
+llapOutPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS deprecated
+    DESCRIPTION
+        "The total number of data packets transmitted on
+        this LocalTalk interface."
+    ::= { llapEntry 3 }
+
+-- this object has been deprecated because it duplicates the
+-- MIB-II variable ifInUnknownProtos
+
+llapInNoHandlers OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS deprecated
+    DESCRIPTION
+        "The total number of good packets received on this
+        LocalTalk interface for which there was no protocol
+        handler."
+    ::= { llapEntry 4 }
+
+llapInLengthErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of packets received on this LocalTalk
+        interface whose actual length did not match the length
+        in the header."
+    ::= { llapEntry 5 }
+
+-- this object has been deprecated because it duplicates the
+-- MIB-II variable ifInErrors
+
+llapInErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS deprecated
+    DESCRIPTION
+        "The total number of packets containing errors received
+        on this LocalTalk interface."
+    ::= { llapEntry 6 }
+
+llapCollisions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of collisions assumed on this
+        LocalTalk interface due to the lack of a lapCTS reply."
+    ::= { llapEntry 7 }
+
+llapDefers OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of times this LocalTalk interface
+        deferred to other packets."
+    ::= { llapEntry 8 }
+
+llapNoDataErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of times this LocalTalk interface
+        received a lapRTS packet and expected a data packet,
+        but did not receive any data packet."
+    ::= { llapEntry 9 }
+
+llapRandomCTSErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of times this LocalTalk interface
+        received a lapCTS packet that was not solicited by a
+        lapRTS packet."
+    ::= { llapEntry 10 }
+
+llapFCSErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of times this LocalTalk interface
+        received a packet with an FCS (Frame Check Sequence)
+        error."
+    ::= { llapEntry 11 }
+
+-- The AARP Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement AARP
+
+aarpTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AarpEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk Address Translation Table contains an
+        equivalence of AppleTalk Network Addresses to the link
+        layer physical address."
+    ::= { aarp 1 }
+
+aarpEntry OBJECT-TYPE
+    SYNTAX AarpEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "Each entry contains one AppleTalk Network Address to
+        physical address equivalence.
+
+        As an example, an instance of the aarpPhysAddress
+        object might be named aarpPhysAddress.1.0.80.234"
+    INDEX { aarpIfIndex, aarpNetAddress }
+    ::= { aarpTable 1 }
+
+AarpEntry ::= SEQUENCE {
+    aarpIfIndex     INTEGER,
+    aarpPhysAddress OCTET STRING,
+    aarpNetAddress  DdpNodeAddress,
+    aarpStatus      INTEGER
+}
+
+aarpIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The interface on which this entry's equivalence is
+        effective.  The interface identified by a particular
+        value of this index is the same interface as
+        identified by the same value of ifIndex."
+    ::= { aarpEntry 1 }
+
+aarpPhysAddress OBJECT-TYPE
+    SYNTAX OCTET STRING
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The media-dependent physical address."
+    ::= { aarpEntry 2 }
+
+aarpNetAddress OBJECT-TYPE
+    SYNTAX DdpNodeAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk Network Address corresponding to the
+        media-dependent physical address."
+    ::= { aarpEntry 3 }
+
+aarpStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of this AARP entry.
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in the
+        aarpTable.  That is, it effectively disassociates
+        the mapping identified with said entry.  It is an
+        implementation-specific matter as to whether the agent
+        removes an invalidated entry from the table.
+        Accordingly, management stations must be prepared to
+        receive from agents tabular information corresponding
+        to entries not currently in use.  Proper
+        interpretation of such entries requires examination
+        of the relevant aarpStatus object."
+    ::= { aarpEntry 4 }
+
+aarpLookups OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the AARP cache for this entity
+        was searched."
+    ::= { aarp 2 }
+
+aarpHits OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times an entry was searched for and
+        found in the AARP cache for this entity."
+    ::= { aarp 3 }
+
+-- The ATPort Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement AppleTalk ports
+--
+-- Note that to be compliant with this group, all variables
+-- that have read-write access must be implemented as
+-- read-write.
+
+atportTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AtportEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A list of AppleTalk ports for this entity."
+    ::= { atport 1 }
+
+atportEntry OBJECT-TYPE
+    SYNTAX AtportEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The description of one of the AppleTalk
+        ports on this entity.
+
+        As an example, an instance of the atportNetFrom object
+        might be named atportNetFrom.2"
+    INDEX { atportIndex }
+    ::= { atportTable 1 }
+
+AtportEntry ::= SEQUENCE {
+    atportIndex               INTEGER,
+    atportDescr               DisplayString,
+    atportType                INTEGER,
+    atportNetStart            ATNetworkNumber,
+    atportNetEnd              ATNetworkNumber,
+    atportNetAddress          DdpNodeAddress,
+    atportStatus              INTEGER,
+    atportNetConfig           INTEGER,
+    atportZoneConfig          INTEGER,
+    atportZoneDefault         ATName,
+    atportIfIndex             INTEGER,
+    atportNetFrom             DdpNodeAddress,
+    atportZoneFrom            DdpNodeAddress,
+    atportInPkts              Counter,
+    atportOutPkts             Counter,
+    atportHome                INTEGER,
+    atportCurrentZone         ATName,
+    atportConflictPhysAddr    OCTET STRING
+}
+
+atportIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A unique value for each AppleTalk port.
+        Its value is between 1 and the total number of
+        AppleTalk ports.  The value for each port must
+        remain constant at least from the re-initialization
+        of the entity's network management system to the
+        next re-initialization."
+    ::= { atportEntry 1 }
+
+atportDescr OBJECT-TYPE
+    SYNTAX DisplayString
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "A text string containing information about the
+        port.  This string is intended for presentation
+        to a human; it must not contain anything but printable
+        ASCII characters."
+    ::= { atportEntry 2 }
+
+-- Several objects throughout the MIB key off of atportType to
+-- determine the format of OCTET STRING addresses of peers.
+-- The address formats are as follows:
+--     localtalk, ethertalk1, ethertalk2, tokentalk, iptalk,
+--       fdditalk, smdstalk, arctalk, and virtual take the
+--       format of DdpNodeAddress
+--     serialPPP: null OCTET STRING
+--     serialNonstandard: vendor specific
+--     aurp: see AURP MIB to determine format
+--     frameRelay: 32 bit DLCI in network byte order
+--       (OCTET STRING (SIZE (4)))
+--     x25: X121Address (see RFC 1382)
+--     ip: IP address (OCTET STRING (SIZE (4)))
+--     osi: NSAP (OCTET STRING (SIZE (3..20)))
+--     decnetIV: 6 bit area, 10 bit host in network byte order
+--       (OCTET STRING (SIZE (2)))
+--     arap: ???
+--     nonAppleTalk3Com: based on ifType
+--     ipx: 32 bit network number in network byte order
+--       followed by datalink address of host
+--     arns: 32 bit ARNS header
+--     hdlc: DdpNodeAddress or null OCTET STRING
+
+atportType OBJECT-TYPE
+    SYNTAX INTEGER {
+         other(1),       -- none of the following
+         localtalk(2),
+         ethertalk1(3),
+         ethertalk2(4),
+         tokentalk(5),
+         iptalk(6),
+         serialPPP(7),
+         serialNonstandard(8),
+         virtual(9),    -- an internal interface
+         fdditalk(10),
+         arctalk(11),
+         smdstalk(12),
+         aurp(13),
+         frameRelay(14),
+         x25(15),
+         ip(16),
+         osi(17),
+         decnetIV(18),
+         arap(19),
+         isdnInThePacketMode(20),
+         nonAppleTalk3Com(21),
+         ipx(22),
+         arns(23),
+         hdlc(24)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The type of port, distinguished by the protocol
+        immediately below DDP in the protocol stack."
+    ::= { atportEntry 3 }
+
+atportNetStart OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The first AppleTalk network address in the range
+        configured for this port.  If this port is not a
+        native AppleTalk port, this object shall have the
+        value of two octets of zero."
+    ::= { atportEntry 4 }
+
+atportNetEnd OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The last AppleTalk network address in the range
+        configured for this port.  If the network to which
+        this AppleTalk port is connected is a non-extended
+        network, or if it is not a native AppleTalk port,
+        the value for atportNetEnd shall be two octets of
+        zero."
+    ::= { atportEntry 5 }
+
+atportNetAddress OBJECT-TYPE
+    SYNTAX DdpNodeAddress
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk network address configured for this
+        port.  In addition, this value may be used as a hint
+        for an initial node number used during node-finding.
+        If this port is not a native AppleTalk port, this
+        object shall have the value of three octets of zero."
+    ::= { atportEntry 6 }
+
+atportStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+         routing(1), --this port is fully configured & routing
+
+         unconfigured(2),
+         off(3),
+         invalid(4),
+         endNode(5), -- this port is acting as an end node
+         offDueToConflict(6), -- port is off due to
+                      -- configuration conflict
+         other(7) -- none of the states defined above
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The configuration status of this port.
+
+        Setting this object to the value invalid(4) has the
+        effect of invalidating the corresponding entry in the
+        atportTable.  That is, it effectively disassociates the
+        mapping identified with said entry.  It is an
+        implementation-specific matter as to whether the agent
+        removes an invalidated entry from the table.
+        Accordingly, management stations must be prepared to
+        receive from agents tabular information corresponding
+        to entries not currently in use.  Proper
+        interpretation of such entries requires examination
+        of the relevant atportStatus object."
+    ::= { atportEntry 7 }
+
+atportNetConfig OBJECT-TYPE
+    SYNTAX INTEGER {
+        conflictOrientedSeed(1),  -- use configured network
+              -- range even if it conflicts with another
+              -- AppleTalk device
+        garnered(2), -- acquire from another AppleTalk device
+        guessed(3),  -- generate a "random" network range
+        unconfigured(4), -- no other value applies
+        conflictAverseSeed(5),  -- use configured network
+              -- range, but don't come up if it conflicts
+        softSeed(6)  -- attempt to use configured network
+              -- range, but use network range from another
+              -- router if our configuration conflicts
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of the network information for this port.
+        If this port is not a native AppleTalk port, this
+        object shall have the value unconfigured(4)."
+    ::= { atportEntry 8 }
+
+atportZoneConfig OBJECT-TYPE
+    SYNTAX INTEGER {
+        conflictOrientedSeed(1), -- use configured zone
+             -- information even if it conflicts with
+             -- another AppleTalk device
+        garnered(2), -- acquire from another AppleTalk device
+        guessed(3),  -- generate "random" zone information
+        unconfigured(4), -- no other value applies
+        conflictAverseSeed(5),  -- use configured zone
+              -- information, but don't come up if it
+              -- conflicts
+        softSeed(6)  -- attempt to use configured zone
+              -- information, but use zone information
+              -- from another router if our configuration
+              -- conflicts
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of the zone information for this port.
+        If this port is not a native AppleTalk port, this
+        object shall have the value unconfigured(4)."
+    ::= { atportEntry 9 }
+
+atportZoneDefault OBJECT-TYPE
+    SYNTAX ATName
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The name of the default zone for this port.  If
+        this port only has one zone, that zone is
+        represented here. If this port is not a native
+        AppleTalk port, this object shall contain an octet
+        string of zero length.
+
+        When this value is changed in a router, the router
+        must send a zipNotify packet on the associated
+        network."
+    ::= { atportEntry 10 }
+
+atportIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The physical interface associated with this
+        AppleTalk port.  The interface identified by a
+        particular value of this index is the same interface
+
+        as identified by the same value of ifIndex."
+    ::= { atportEntry 11 }
+
+atportNetFrom OBJECT-TYPE
+    SYNTAX DdpNodeAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "When atportNetConfig is set to garnered(2), this
+        variable contains the DDP address of an entity from
+        which the AppleTalk network number was garnered.
+        When atportNetConfig is set to
+        conflictOrientedSeed(1), conflictAverseSeed(5),
+        or softSeed(6), this variable contains the DDP
+        address of an entity which confirmed or supplied our
+        AppleTalk network number, for example by replying to
+        a ZIP GetNetInfo request.
+
+        If atportNetConfig is set to guessed(3) or
+        unconfigured(4), or if the entity has not received
+        any network number confirmation, this variable
+        should be set to three octets of zero."
+    ::= { atportEntry 12 }
+
+atportZoneFrom OBJECT-TYPE
+    SYNTAX DdpNodeAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "When atportZoneConfig is set to garnered(2), this
+        variable contains the DDP address of an entity from
+        which the AppleTalk zone list was garnered.
+
+        When atportZoneConfig is set to
+        conflictOrientedSeed(1), conflictAverseSeed(5), or
+        softSeed(6), this variable contains the DDP address
+        of an entity which confirmed or supplied our
+        AppleTalk zone information, for example by replying
+        to a ZIP GetNetInfo request or a ZIP Query.
+
+        If atportZoneConfig is set to guessed(3) or
+        unconfigured(4), or if the entity has not received
+        any zone confirmation, this variable should be set
+        to three octets of zero."
+    ::= { atportEntry 13 }
+
+atportInPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of packets received by this entity on
+        this port."
+    ::= { atportEntry 14 }
+
+atportOutPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of packets transmitted by this entity on
+        this port."
+    ::= { atportEntry 15 }
+
+atportHome OBJECT-TYPE
+    SYNTAX INTEGER {
+        home(1),
+        notHome(2)
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "An indication of whether or not the entity is
+        homed on this port, that is to say, a port on which
+        the entity could perform NBP registrations for
+        services that it chooses to advertise."
+    ::= { atportEntry 16 }
+
+atportCurrentZone OBJECT-TYPE
+    SYNTAX ATName
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The current zone for the port.  In general, this is
+        the zone name in which services on this port will
+        be registered.  If this port is not a native
+        AppleTalk port, this object shall contain an octet
+        string of zero length.  Note that modifications to
+        this object do not affect the nbpTable."
+    ::= { atportEntry 17 }
+
+atportConflictPhysAddr OBJECT-TYPE
+    SYNTAX OCTET STRING
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The link-layer address of a device which caused
+        this entity to set atportStatus to
+        offDueToConflict(6). If this address is not
+        available, or if the entity has not set atportStatus
+        to offDueToConflict, this object shall be a zero
+        length OCTET STRING."
+    ::= { atportEntry 18 }
+
+-- The atportZoneTable stores information about the zones
+-- associated with each port.  The default zone for each
+-- port is stored in the port's atportZoneDefault variable;
+-- all other zones for the port are listed in this table.
+-- If a port only has one zone, it should be stored in the
+-- port's atportZoneDefault variable, and this table should
+-- be empty.
+--
+-- One of the indexes for this table is atportZoneName.
+-- Even though AppleTalk zone name matches are
+-- case-insensitive, this table will store zone names
+-- regardless of case.  SNMP Get, GetNext and Set operations
+-- are performed on these (potentially) mixed case strings
+-- according to the normal SNMP rules with the following
+-- caveat: in processing a SET request, the agent shall
+-- perform a case-insensitive search and a case-sensitive
+-- search.  If the case-insensitive search matches and the
+-- case-sensitive search does not match, the "equivalent"
+-- zone name exists in another entry with a different
+-- capitalization and the SET request shall fail due
+-- to the name being inconsistent (SNMPv1 should return a
+-- genErr.) This insures that only one version of a zone
+-- name will appear in each agent, at the expense of forcing
+-- a management station to query using that exact name.
+
+atportZoneTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AtportZoneEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of zone information for non-default
+        zones on ports."
+    ::= { atport 2 }
+
+atportZoneEntry OBJECT-TYPE
+    SYNTAX AtportZoneEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "An entry of zone information for a port.
+
+        As an example, an instance of the atportZoneStatus
+        object might be named
+        atportZoneStatus.2.8.84.119.105.108.105.103.104.116"
+    INDEX { atportZonePort, atportZoneName }
+    ::= { atportZoneTable 1 }
+
+AtportZoneEntry ::= SEQUENCE {
+    atportZonePort     INTEGER,
+    atportZoneName     ATName (SIZE (1..32)),
+    atportZoneStatus   INTEGER
+}
+
+atportZonePort OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "An integer representing the port to which this zone
+        belongs. The port identified by a particular value
+        of this object is the same port as identified by the
+        same value of atportIndex."
+    ::= { atportZoneEntry 1 }
+
+atportZoneName OBJECT-TYPE
+    SYNTAX ATName (SIZE (1..32))
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A zone name configured for the AppleTalk port
+        referred to in the corresponding entry of
+        atportZonePort.
+
+        When this value is changed in a router, the router
+        must send a zipNotify packet on the associated
+        network."
+    ::= { atportZoneEntry 2 }
+
+atportZoneStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of this zone entry.
+
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in
+        the atportZoneTable.  That is, it effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant
+        atportZoneStatus object."
+    ::= { atportZoneEntry 3 }
+
+-- The DDP Group
+--
+-- Implementation of this group is mandatory for all
+-- entities that implement DDP
+--
+-- This group consists of DDP variables that would be
+-- implemented by either a router or an end node.  The
+-- following variables are included:
+--     ddpOutRequests
+--     ddpOutShorts
+--     ddpOutLongs
+--     ddpInReceives
+--     ddpInLocalDatagrams
+--     ddpNoProtocolHandlers
+--     ddpTooShortErrors
+--     ddpTooLongErrors
+--     ddpShortDDPErrors
+--     ddpChecksumErrors
+--     ddpListenerTable
+--
+-- Note that the variables in this group are not numbered
+-- sequentially.  This was done so that it was not necessary
+-- to deprecate variables from RFC 1243.
+
+ddpOutRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of DDP datagrams which were
+        supplied to DDP by local DDP clients in requests for
+
+        transmission.  Note that this counter does not
+        include any datagrams counted in ddpForwRequests."
+    ::= { ddp 1 }
+
+ddpOutShorts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of short DDP datagrams which were
+        transmitted from this entity."
+    ::= { ddp 2 }
+
+ddpOutLongs OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of long DDP datagrams which were
+        transmitted from this entity."
+    ::= { ddp 3 }
+
+ddpInReceives OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input datagrams received by
+        DDP, including those received in error."
+    ::= { ddp 4 }
+
+ddpInLocalDatagrams OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams for which
+        this
+        entity was their final DDP destination."
+    ::= { ddp 6 }
+
+ddpNoProtocolHandlers OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of DDP datagrams addressed to this
+        entity that were addressed to an upper layer protocol
+
+        for which no protocol handler existed."
+    ::= { ddp 7 }
+
+ddpTooShortErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams dropped
+        because the received data length was less than the
+        data length specified in the DDP header or the
+        received data length was less than the length of the
+        expected DDP header."
+    ::= { ddp 9 }
+
+ddpTooLongErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams dropped
+        because they exceeded the maximum DDP datagram
+        size."
+    ::= { ddp 10 }
+
+ddpShortDDPErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams dropped
+        because this entity was not their final destination
+        and their type was short DDP."
+    ::= { ddp 12 }
+
+ddpChecksumErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams for which
+        this DDP entity was their final destination, and
+        which were dropped because of a checksum error."
+    ::= { ddp 14 }
+
+ddpListenerTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF DdpListenerEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The ddpListenerTable stores information for each
+        DDP socket that has a listener."
+    ::= { ddp 15 }
+
+ddpListenerEntry OBJECT-TYPE
+    SYNTAX DdpListenerEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "This ddpListenerEntry contains information about a
+        particular socket that has a socket listener.
+
+        As an example, an instance of the ddpListenerStatus
+        object might be named ddpListenerStatus.0.80.220.1"
+    INDEX { ddpListenerAddress }
+    ::= { ddpListenerTable 1 }
+
+DdpListenerEntry ::= SEQUENCE {
+    ddpListenerAddress         DdpSocketAddress,
+    ddpListenerInPkts          Counter,
+    ddpListenerStatus          INTEGER
+}
+
+ddpListenerAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The DDP address that this socket listener is bound
+        to.  If this socket listener isn't bound to a
+        particular address, for instance if it is intended
+        for all interfaces, this object shall have the value
+        of three octets of zero followed by one octet of
+        socket number. The socket number must not equal
+        zero."
+    ::= { ddpListenerEntry 1 }
+
+ddpListenerInPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of packets received for this listener."
+    ::= { ddpListenerEntry 2 }
+
+ddpListenerStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of this socket listener.
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in the
+        ddpListenerTable.  That is, it effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant
+        ddpListenerStatus object."
+    ::= { ddpListenerEntry 3 }
+
+-- The DDP Router Group
+--
+-- Implementation of this group is required for all routers
+-- which implement DDP
+--
+-- This group consists of DDP variables that only a router
+-- would implement.  The following variables are included:
+--     ddpForwRequests
+--     ddpOutNoRoutes
+--     ddpBroadcastErrors
+--     ddpHopCountErrors
+--     ddpForwardingTable
+--
+-- Note that the variables in this group are not numbered
+-- sequentially.  This was done so that variables from
+-- RFC 1243 did not need to be deprecated.
+
+ddpForwRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of input datagrams for which this entity
+        was not their final DDP destination, as a result of
+
+        which an attempt was made to find a route to forward
+        them to that final destination."
+    ::= { ddp 5 }
+
+ddpOutNoRoutes OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of DDP datagrams dropped because a
+        route could not be found to their final destination."
+    ::= { ddp 8 }
+
+ddpBroadcastErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams dropped
+        because this entity was not their final destination
+        and they were addressed to the link level broadcast."
+    ::= { ddp 11 }
+
+ddpHopCountErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams dropped
+        because this entity was not their final destination
+        and their hop count would exceed 15."
+    ::= { ddp 13 }
+
+-- The ddpForwardingTable is a read-only table which shows the
+-- next hop that a datagram will take when being routed to a
+-- specific network.  If a manager wishes to change data in
+-- this table via SNMP, he must change it in the MIB for the
+-- routing protocol itself (by incrementing hop counts,
+-- etc), rather than in this table.  This table is derived
+-- by the managed entity from the information it receives
+-- from the routing protocols that it supports.
+--
+-- This table also shows the routing table from which the next
+-- hop was derived.  When a MIB is written for an AppleTalk
+-- routing protocol, it should include the definition of an
+-- object identifier which will be used in the
+-- ddpForwardingProto variable defined here.  (For example,
+-- a value for RTMP is defined as { ddp-forw-proto-oids 1 }
+
+-- below.)
+--
+-- To look for a specific net N in this table, it is suggested
+-- that the management station perform a get-next query for
+-- ddpForwardingNetEnd.(N-1).  This will retrieve the correct
+-- row if it exists in the table.
+
+ddpForwardingTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF DdpForwardingEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A table of forwarding entries for DDP.  This table
+        contains a route for each AppleTalk network currently
+        known to the entity."
+    ::= { ddp 16 }
+
+ddpForwardingEntry OBJECT-TYPE
+    SYNTAX DdpForwardingEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A forwarding entry for a particular AppleTalk
+        network.
+
+        As an example, an instance of the ddpForwardingPort
+        object might be named ddpForwardingPort.0.90"
+    INDEX { ddpForwardingNetEnd }
+    ::= { ddpForwardingTable 1 }
+
+DdpForwardingEntry ::= SEQUENCE {
+    ddpForwardingNetEnd         ATNetworkNumber,
+    ddpForwardingNetStart       ATNetworkNumber,
+    ddpForwardingNextHop        OCTET STRING,
+    ddpForwardingProto          OBJECT IDENTIFIER,
+    ddpForwardingModifiedTime   TimeTicks,
+    ddpForwardingUseCounts      Counter,
+    ddpForwardingPort           INTEGER
+}
+
+ddpForwardingNetEnd OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The last network number in the network range
+        matched by this forwarding entry.  This will not be
+        zero even if this corresponds to a non-extended
+
+        net."
+    ::= { ddpForwardingEntry 1 }
+
+ddpForwardingNetStart OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The first network number in the network range
+        matched by this forwarding entry."
+    ::= { ddpForwardingEntry 2 }
+
+ddpForwardingNextHop OBJECT-TYPE
+    SYNTAX OCTET STRING
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The next hop in the route to this entry's
+        destination network.  The format of this address can
+        be determined by examinating the atportType
+        corresponding to this entry."
+    ::= { ddpForwardingEntry 3 }
+
+ddpForwardingProto OBJECT-TYPE
+    SYNTAX OBJECT IDENTIFIER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The routing mechanism by which this route was
+        learned."
+    ::= { ddpForwardingEntry 4 }
+
+ddpForwardingModifiedTime OBJECT-TYPE
+    SYNTAX TimeTicks
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The value of sysUpTime at the time of the last
+        modification to this entry.  The initial value of
+        ddpForwardingModified time shall be the value of
+        sysUpTime at the time the entry is created."
+    ::= { ddpForwardingEntry 5 }
+
+ddpForwardingUseCounts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this entry has been used to
+        route a packet to the destination network.  Note
+        that this counter is not cleared when the
+        corresponding ddpForwardingNextHop variable
+        changes."
+   ::= { ddpForwardingEntry 6 }
+
+ddpForwardingPort OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk port through which
+        ddpForwardingNextHop is reached.  The interface
+        identified by a particular value of this variable is
+        the same interface as identified by the same value
+        of atportIndex."
+    ::= { ddpForwardingEntry 7 }
+
+ddpForwProtoOids OBJECT IDENTIFIER ::= { ddp 17 }
+
+-- The value to be assigned to ddpForwardingProto when the
+-- routing protocol is RTMP.
+rtmpRoutingProto OBJECT IDENTIFIER ::= { ddpForwProtoOids 1 }
+
+-- The value to be assigned to ddpForwardingProto when the
+-- routing protocol is KIP.
+kipRoutingProto OBJECT IDENTIFIER ::= { ddpForwProtoOids 2 }
+
+ddpForwardingTableOverflows OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the entity attempted to add an
+        entry to the forwarding table but failed due to
+        overflow."
+    ::= { ddp 18 }
+
+-- The RTMP Group
+--
+-- Implementation of this group is required for all routers
+-- which implement RTMP
+
+rtmpTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RtmpEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A list of Routing Table Maintenance Protocol
+        entries for this entity."
+    ::= { rtmp 1 }
+
+rtmpEntry OBJECT-TYPE
+    SYNTAX RtmpEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The route entry to a particular network range.
+
+        As an example, an instance of the rtmpPort object
+        might be named rtmpPort.0.80"
+    INDEX { rtmpRangeStart }
+    ::= { rtmpTable 1 }
+
+RtmpEntry ::= SEQUENCE {
+    rtmpRangeStart  ATNetworkNumber,
+    rtmpRangeEnd    ATNetworkNumber,
+    rtmpNextHop     OCTET STRING,
+    rtmpType        INTEGER,
+    rtmpPort        INTEGER,
+    rtmpHops        INTEGER,
+    rtmpState       INTEGER
+}
+
+rtmpRangeStart OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The first DDP network address in the network range
+        to which this routing entry pertains.  This is a two
+        octet DDP network address in network byte order."
+    ::= { rtmpEntry 1 }
+
+rtmpRangeEnd OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The last DDP network address in the network range
+        to which this routing entry pertains.  This is a two
+        octet DDP network address in network byte order.  If
+        the network to which this routing entry pertains is
+
+        a non-extended network, the value for rtmpRangeEnd
+        shall be two octets of zero."
+    ::= { rtmpEntry 2 }
+
+rtmpNextHop OBJECT-TYPE
+    SYNTAX OCTET STRING
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The next internet router in the route to this
+        entry's destination network.  The format of this
+        address can be determined by examinating the
+        atportType corresponding to this entry."
+    ::= { rtmpEntry 3 }
+
+rtmpType OBJECT-TYPE
+    SYNTAX INTEGER {
+        other(1),
+        appletalk(2),
+        serialPPP(3),
+        serialNonstandard(4)
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The type of network over which this route points."
+    ::= { rtmpEntry 4 }
+
+rtmpPort OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk port over which this route points.
+        The interface identified by a particular value of
+        this variable is the same interface as identified by
+        the same value of atportIndex."
+    ::= { rtmpEntry 5 }
+
+rtmpHops OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of hops required to reach the
+        destination network to which this routing entry
+        pertains."
+    ::= { rtmpEntry 6 }
+
+rtmpState OBJECT-TYPE
+    SYNTAX INTEGER {
+        good(1),
+        suspect(2),
+        badZero(3),
+        badOne(4),
+        invalid(5)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of the information contained in this
+        route entry.
+
+        Setting this object to the value invalid(5) has the
+        effect of invalidating the corresponding entry in
+        the rtmpTable.  That is, it  effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant rtmpState
+        object."
+    ::= { rtmpEntry 7 }
+
+rtmpInDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of good RTMP data packets
+        received by this entity."
+    ::= { rtmp 2 }
+
+rtmpOutDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of RTMP packets sent by this
+        entity."
+    ::= { rtmp 3 }
+
+rtmpInRequestPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of good RTMP Request packets
+        received by this entity."
+    ::= { rtmp 4 }
+
+rtmpNextIREqualChanges OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of times RTMP changes the
+        Next Internet Router in a routing entry because the
+        hop count advertised in a routing tuple was equal to
+        the current hop count for a particular network."
+    ::= { rtmp 5 }
+
+rtmpNextIRLessChanges OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of times RTMP changes the
+        Next Internet Router in a routing entry because the
+        hop count advertised in a routing tuple was less
+        than the current hop count for a particular network."
+    ::= { rtmp 6 }
+
+rtmpRouteDeletes OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of times RTMP deletes a route
+        because it was aged out of the table.  This can help
+        to detect routing problems."
+    ::= { rtmp 7 }
+
+rtmpRoutingTableOverflows OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times RTMP attempted to add a route
+        to the RTMP table but failed due to lack of space."
+    ::= { rtmp 8 }
+
+-- The RTMP Stub Group
+--
+-- Implementation of this group is mandatory for all
+-- entities that implement RTMP
+--
+-- It is intended that this group be implemented by routers
+-- and end nodes.
+
+rtmpOutRequestPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of RTMP Request packets sent
+        by this entity."
+    ::= { rtmpStub 1 }
+
+rtmpInVersionMismatches OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of RTMP packets received by
+        this entity that were rejected due to a version
+        mismatch."
+    ::= { rtmpStub 2 }
+
+rtmpInErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of RTMP packets received by
+        this entity that were rejected for an error other
+        than version mismatch."
+    ::= { rtmpStub 3 }
+
+-- The KIP Group
+--
+-- Implementation of this group is mandatory for all
+-- entities that implement KIP
+
+kipTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF KipEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of routing information for KIP networks."
+    ::= { kip 1 }
+
+kipEntry OBJECT-TYPE
+    SYNTAX KipEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "An entry in the routing table for KIP networks.
+
+        As an example, an instance of the kipCore object
+        might be named kipCore.0.80"
+    INDEX { kipNetStart }
+    ::= { kipTable 1 }
+
+KipEntry ::= SEQUENCE {
+    kipNetStart     ATNetworkNumber,
+    kipNetEnd       ATNetworkNumber,
+    kipNextHop      IpAddress,
+    kipHopCount     INTEGER,
+    kipBCastAddr    IpAddress,
+    kipCore         INTEGER,
+    kipType         INTEGER,
+    kipState        INTEGER,
+    kipShare        INTEGER,
+    kipFrom         IpAddress
+}
+
+kipNetStart OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The first AppleTalk network address in the range
+        for this routing entry.  This address is a two octet
+        DDP network address in network byte order."
+    ::= { kipEntry 1 }
+
+kipNetEnd OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The last AppleTalk network address in the range for
+        this routing entry.  This address is a two octet DDP
+        network address in network byte order.  If the
+        network to which this AppleTalk port is connected is
+        a non-extended network, the value for kipNetEnd
+
+        shall be two octets of zero."
+    ::= { kipEntry 2 }
+
+kipNextHop OBJECT-TYPE
+    SYNTAX IpAddress
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The IP address of the next hop in the route to this
+        entry's destination network."
+    ::= { kipEntry 3 }
+
+kipHopCount OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The number of hops required to reach the destination
+        network to which this entry pertains."
+    ::= { kipEntry 4 }
+
+kipBCastAddr OBJECT-TYPE
+    SYNTAX IpAddress
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The form of the IP address used to broadcast on this
+        network."
+    ::= { kipEntry 5 }
+
+kipCore OBJECT-TYPE
+    SYNTAX INTEGER {
+         core(1),
+         notcore(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of kipNextHop as a core gateway."
+    ::= { kipEntry 6 }
+
+kipType OBJECT-TYPE
+    SYNTAX INTEGER {
+         kipRouter(1),
+         net(2),
+         host(3),
+         other(4),
+         async(5)
+
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The type of the entity that this route points to."
+    ::= { kipEntry 7 }
+
+kipState OBJECT-TYPE
+    SYNTAX INTEGER {
+         configured(1),  -- this entry is not aged
+         learned(2),
+         invalid(3)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The state of this network entry.
+
+        Setting this object to the value invalid(3) has the
+        effect of invalidating the corresponding entry in the
+        kipTable.  That is, it  effectively disassociates the
+        mapping identified with said entry.  It is an
+        implementation-specific matter as to whether the agent
+        removes an invalidated entry from the table.
+        Accordingly, management stations must be prepared to
+        receive from agents tabular information corresponding
+        to entries not currently in use.  Proper
+        interpretation of such entries requires examination
+        of the relevant kipState object."
+    ::= { kipEntry 8 }
+
+kipShare OBJECT-TYPE
+    SYNTAX INTEGER {
+         shared(1),
+         private(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "If the information in this entry is propagated to
+        other routers as part of the AA routing protocol,
+        the value of this variable is equal to shared(1).
+        Otherwise its value is private(2)."
+    ::= { kipEntry 9 }
+
+kipFrom OBJECT-TYPE
+    SYNTAX IpAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The IP address from which the routing entry was
+        learned via the AA protocol.  If this entry was not
+        created via the AA protocol, it should contain IP
+        address 0.0.0.0."
+    ::= { kipEntry 10 }
+
+-- The ZIP Router Group
+--
+-- Implementation of this group is required for all routers
+-- which implement ZIP
+--
+-- This group consists of ZIP variables that would be
+-- implemented by a router.
+
+zipTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ZipEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of zone information for reachable
+        AppleTalk networks."
+    ::= { zipRouter 1 }
+
+zipEntry OBJECT-TYPE
+    SYNTAX ZipEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "An entry of zone information for a particular zone
+        and network combination.
+
+        As an example, an instance of the zipZoneState object
+        might be named zipZoneState.0.80.4"
+    INDEX { zipZoneNetStart, zipZoneIndex }
+    ::= { zipTable 1 }
+
+ZipEntry ::= SEQUENCE {
+    zipZoneName     ATName,
+    zipZoneIndex    INTEGER,
+    zipZoneNetStart ATNetworkNumber,
+    zipZoneNetEnd   ATNetworkNumber,
+    zipZoneState    INTEGER,
+    zipZoneFrom     OCTET STRING,
+    zipZonePort     INTEGER
+}
+
+zipZoneName OBJECT-TYPE
+    SYNTAX ATName
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The zone name of this entry.  This is stored in
+        Mac ASCII format.  If the full zone list for the
+        entry is not known, the value for zipZoneName shall
+        be a zero length octet string."
+    ::= { zipEntry 1 }
+
+zipZoneIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "An integer that is unique to the zipZoneName that
+        is present in this entry.  For any given zone name,
+        every zipEntry that has an equal zone name will have
+        the same zipZoneIndex.  When a zone name is
+        discovered which is not currently in the table, it
+        will be assigned an index greater than any
+        previously assigned index."
+    ::= { zipEntry 2 }
+
+zipZoneNetStart OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The network that starts the range for this entry.
+        This address is a two octet DDP network address in
+        network byte order."
+    ::= { zipEntry 3 }
+
+zipZoneNetEnd OBJECT-TYPE
+    SYNTAX ATNetworkNumber
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The network that ends the range for this entry.
+        This address is a two octet DDP network address in
+        network byte order.  If the network to which this
+        zip entry pertains is a non-extended network, the
+        value for zipZoneNetEnd shall be two octets of
+        zero."
+    ::= { zipEntry 4 }
+
+zipZoneState OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The state of this zip entry.
+
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in
+        the zipTable.  That is, it  effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant zipZoneState
+        object."
+    ::= { zipEntry 5 }
+
+zipZoneFrom OBJECT-TYPE
+    SYNTAX OCTET STRING
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The address from which this zone name to network
+        number mapping was learned.  The format of this
+        address can be determined by examining the
+        atportType corresponding to this entry.  When this
+        mapping is learned from the entity itself, this
+        object shall have the value of three
+        octets of zero."
+    ::= { zipEntry 6 }
+
+zipZonePort OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk port through which this zone name to
+        network number mapping was learned.  The interface
+        identified by a particular value of this variable is
+        the same interface as identified by the same value
+        of atportIndex."
+    ::= { zipEntry 7 }
+
+zipInZipQueries OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Queries received by this entity."
+    ::= { zipRouter 2 }
+
+zipInZipReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Replies received by this entity."
+    ::= { zipRouter 3 }
+
+zipInZipExtendedReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Extended Replies received by this
+        entity."
+    ::= { zipRouter 4 }
+
+zipZoneConflictErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times a conflict has been detected
+        between this entity's zone information and another
+        entity's zone information."
+    ::= { zipRouter 5 }
+
+zipInObsoletes OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Takedown or ZIP Bringup packets
+        received by this entity.  Note that as the ZIP
+        Takedown and ZIP Bringup packets have been
+        obsoleted, the receipt of one of these packets
+        indicates that a node sent it in error."
+    ::= { zipRouter 6 }
+
+-- The zipRouterNetInfoTable is used to record information
+-- about zipGetNetInfo and zipGetNetInfo Reply packets that
+-- were received on each port for a router.  This table
+-- augments the atportTable.
+
+zipRouterNetInfoTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ZipRouterNetInfoEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of Net Info packets received by each port
+        on this entity."
+    ::= { zipRouter 7 }
+
+zipRouterNetInfoEntry OBJECT-TYPE
+    SYNTAX ZipRouterNetInfoEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The description of the Net Info packets received on
+        a particular port on this entity.  One such entry
+        shall exist for each atport on this router entity.
+
+        As an example, an instance of the zipInGetNetInfos
+        object might be named zipInGetNetInfos.2"
+    INDEX { atportIndex }
+    ::= { zipRouterNetInfoTable 1 }
+
+ZipRouterNetInfoEntry ::= SEQUENCE {
+    zipInGetNetInfos        Counter,
+    zipOutGetNetInfoReplies Counter,
+    zipZoneOutInvalids      Counter,
+    zipAddressInvalids      Counter
+}
+
+zipInGetNetInfos OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP GetNetInfo packets received on
+        this port by this entity."
+    ::= { zipRouterNetInfoEntry 1 }
+
+zipOutGetNetInfoReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP GetNetInfo Reply packets sent out
+        this port by this entity."
+    ::= { zipRouterNetInfoEntry 2 }
+
+zipZoneOutInvalids OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this entity has sent a ZIP
+        GetNetInfo Reply with the zone invalid bit set in
+        response to a GetNetInfo Request with an invalid
+        zone name."
+    ::= { zipRouterNetInfoEntry 3 }
+
+zipAddressInvalids OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this entity had to broadcast a
+        ZIP GetNetInfo Reply because the GetNetInfo Request
+        had an invalid address."
+    ::= { zipRouterNetInfoEntry 4 }
+
+-- The ZIP End Node Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement ZIP
+--
+-- This group consists of ZIP variables that would be
+-- implemented by either a router or an end node.
+
+-- The zipNetInfoTable is used to record information about
+-- zipGetNetInfo and zipGetNetInfo Reply packets that were
+-- received on each port of an entity.  This table augments
+-- the atportTable.
+
+zipNetInfoTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ZipNetInfoEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of Net Info packets received by each port
+        on this entity."
+    ::= { zipEndNode 1 }
+
+zipNetInfoEntry OBJECT-TYPE
+    SYNTAX ZipNetInfoEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The description of the Net Info packets received on
+        a particular port on this entity.  One such entry
+        shall exist for each atport on this entity.
+
+        As an example, an instance of the zipOutGetNetInfos
+        object might be named zipOutGetNetInfos.2"
+    INDEX { atportIndex }
+    ::= { zipNetInfoTable 1 }
+
+ZipNetInfoEntry ::= SEQUENCE {
+    zipOutGetNetInfos       Counter,
+    zipInGetNetInfoReplies  Counter,
+    zipZoneInInvalids       Counter
+}
+
+zipOutGetNetInfos OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP GetNetInfo packets sent out this
+        port by this entity."
+    ::= { zipNetInfoEntry 1 }
+
+zipInGetNetInfoReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP GetNetInfo Reply packets received
+    on this port by this entity."
+    ::= { zipNetInfoEntry 2 }
+
+zipZoneInInvalids OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this entity has received a ZIP
+        GetNetInfo Reply with the zone invalid bit set
+        because the corresponding GetNetInfo Request had an
+        invalid zone name."
+    ::= { zipNetInfoEntry 3 }
+
+zipInErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP packets received by this entity
+        that were rejected for any error."
+    ::= { zipEndNode 2 }
+
+-- The NBP Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement NBP
+
+nbpTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF NbpEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of NBP services registered on this entity."
+    ::= { nbp 1 }
+
+nbpEntry OBJECT-TYPE
+    SYNTAX NbpEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The description of an NBP service registered on this
+        entity.
+
+        As an example, an instance of the nbpZone object
+        might be named nbpZone.2"
+    INDEX { nbpIndex }
+    ::= { nbpTable  1 }
+
+NbpEntry ::= SEQUENCE {
+    nbpIndex        INTEGER,
+    nbpObject       ATName (SIZE (1..32)),
+    nbpType         ATName (SIZE (1..32)),
+    nbpZone         ATName,
+    nbpState        INTEGER,
+    nbpAddress      DdpSocketAddress,
+    nbpEnumerator   INTEGER (0..255)
+}
+
+nbpIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The index of this NBP entry.  This index is unique
+        with respect to the indexes of all other NBP entries,
+        and shall remain constant throughout the lifetime
+        of this object."
+    ::= { nbpEntry 1 }
+
+nbpObject OBJECT-TYPE
+    SYNTAX ATName (SIZE (1..32))
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The name of the service described by this entity.
+        When this variable is changed, the entity should
+        perform an NBP registration using the new nbpObject."
+    ::= { nbpEntry 2 }
+
+nbpType OBJECT-TYPE
+    SYNTAX ATName (SIZE (1..32))
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The type of the service described by this entity.
+        When this variable is changed, the entity should
+        perform an NBP registration using the new nbpType."
+    ::= { nbpEntry 3 }
+
+nbpZone OBJECT-TYPE
+    SYNTAX ATName
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The zone the service described by this entity is
+        registered in.  This must be the actual zone name,
+        without any wildcard characters.  When this variable
+        is changed, the entity should perform an NBP
+        registration using the new nbpZone."
+        ::= { nbpEntry 4 }
+
+nbpState OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        registering(2), -- attempting to register the service
+        registrationFailed(3),
+        invalid(4)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The state of this NBP entry.
+        When the registration for an entry in the nbpTable
+        fails, it is an implementation-specific matter as to
+        how long the entry will remain in the
+        registrationFailed(3) state before moving to the
+        invalid(4) state.  Note that the entry may pass
+        immediately from the registrationFailed state to
+        the invalid state.
+
+        Setting this object to the value invalid(4) has the
+        effect of invalidating the corresponding entry in the
+        nbpTable.  That is, it  effectively disassociates the
+        mapping identified with said entry.  It is an
+        implementation-specific matter as to whether the agent
+        removes an invalidated entry from the table.
+        Accordingly, management stations must be prepared to
+        receive from agents tabular information corresponding
+        to entries not currently in use.  Proper
+        interpretation of such entries requires examination
+        of the relevant nbpState object."
+    ::= { nbpEntry 5 }
+
+nbpAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The DDP network, node, and socket number of this
+        entity. If this is unspecified, for instance if the
+        registration is on all ports of a multiport device,
+        this object shall have the value of three octets of
+        zero, followed by one octet of socket number."
+    ::= { nbpEntry 6 }
+
+nbpEnumerator OBJECT-TYPE
+    SYNTAX INTEGER (0..255)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The enumerator assigned to this entity."
+    ::= { nbpEntry 7 }
+
+nbpInLookUpRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP LookUp Requests received."
+    ::= { nbp 2 }
+
+nbpInLookUpReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP LookUp Replies received."
+    ::= { nbp 3 }
+
+nbpInBroadcastRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP Broadcast Requests received."
+    ::= { nbp 4 }
+
+nbpInForwardRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP Forward Requests received."
+    ::= { nbp 5 }
+
+nbpOutLookUpReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP LookUp Replies sent."
+    ::= { nbp 6 }
+
+nbpRegistrationFailures OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this node experienced a failure
+        in attempting to register an NBP entity."
+    ::= { nbp 7 }
+
+    nbpInErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP packets received by this entity
+        that were rejected for any error."
+    ::= { nbp 8 }
+
+-- The ATEcho Group
+--
+-- Implementation of this group is mandatory for all
+-- entities that implement ATEcho
+
+atechoRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of AppleTalk Echo requests received."
+    ::= { atecho 1 }
+
+atechoReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of AppleTalk Echo replies sent."
+    ::= { atecho 2 }
+
+atechoOutRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The count of AppleTalk Echo requests sent."
+    ::= { atecho 3 }
+
+atechoInReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The count of AppleTalk Echo replies received."
+    ::= { atecho 4 }
+
+-- The ATP Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement ATP
+
+atpInPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ATP packets received by this entity."
+    ::= { atp 1 }
+
+atpOutPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ATP packets sent by this entity."
+    ::= { atp 2 }
+
+atpTRequestRetransmissions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times that a timeout occurred and a
+        Transaction Request packet needed to be
+        retransmitted by this host."
+    ::= { atp 3 }
+
+atpTResponseRetransmissions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times a timeout was detected and a
+        Transaction Response packet needed to be
+        retransmitted by this host."
+    ::= { atp 4 }
+
+atpReleaseTimerExpiredCounts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the release timer expired, as a
+        result of which a Request Control Block had to be
+
+        deleted."
+    ::= { atp 5 }
+
+atpRetryCountExceededs OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the retry count was exceeded,
+        and an error was returned to the client of ATP."
+    ::= { atp 6 }
+
+atpListenerTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AtpListenerEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The atpListenerTable stores information for each ATP
+        socket that has a listener."
+    ::= { atp 7 }
+
+atpListenerEntry OBJECT-TYPE
+    SYNTAX AtpListenerEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "This atpListenerEntry contains information about a
+        particular socket that has a socket listener.
+
+        As an example, an instance of the atpListenerStatus
+        object might be named atpListenerStatus.0.80.220.3"
+    INDEX { atpListenerAddress }
+    ::= { atpListenerTable 1 }
+
+AtpListenerEntry ::= SEQUENCE {
+    atpListenerAddress   DdpSocketAddress,
+    atpListenerStatus    INTEGER
+}
+
+atpListenerAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The DDP address that this socket listener is bound
+        to. If this socket listener isn't bound to a
+        particular address, for instance if it is intended
+        for all interfaces, this object shall have the value
+
+        of three octets of zero followed by one octet of
+        socket number."
+    ::= { atpListenerEntry 1 }
+
+atpListenerStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of this socket.
+
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in
+        the atpListenerTable.  That is, it effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant
+        atpListenerStatus object."
+    ::= { atpListenerEntry 2 }
+
+-- The PAP group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement PAP
+
+papInOpenConns OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of PAP Open Connection requests received
+        by this entity."
+    ::= { pap 1 }
+
+papOutOpenConns OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of PAP Open Connection requests sent by
+        this entity."
+    ::= { pap 2 }
+
+papInDatas OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of PAP Data messages received by
+        this entity."
+    ::= { pap 3 }
+
+papOutDatas OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of PAP Data messages sent by
+        this entity."
+    ::= { pap 4 }
+
+papInCloseConns OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of PAP Close Connection requests
+        received by this entity."
+    ::= { pap 5 }
+
+papOutCloseConns OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of PAP Close Connection requests sent by
+        this entity."
+    ::= { pap 6 }
+
+papTickleTimeoutCloses OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the PAP entity on this node
+        closed a connection because it didn't receive a
+        Tickle message before its timer expired."
+    ::= { pap 7 }
+
+papServerTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PapServerEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A list of servers on this entity that are
+        accessible through the Printer Access Protocol."
+    ::= { pap 8 }
+
+papServerEntry OBJECT-TYPE
+    SYNTAX PapServerEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A set of information about a particular PAP server's
+        configuration and performance.
+
+        As an example, an instance of the papServerStatus
+        object might be named papServerStatus.1"
+    INDEX { papServerIndex }
+    ::= { papServerTable 1 }
+
+PapServerEntry ::= SEQUENCE {
+    papServerIndex                          INTEGER,
+    papServerListeningSocket                DdpSocketAddress,
+    papServerStatus                         DisplayString,
+    papServerCompletedJobs                  Counter,
+    papServerBusyJobs                       INTEGER,
+    papServerFreeJobs                       INTEGER,
+    papServerAuthenticationFailures         Counter,
+    papServerAccountingFailures             Counter,
+    papServerGeneralFailures                Counter,
+    papServerState                          INTEGER,
+    papServerLastStatusMsg                  DisplayString
+}
+
+papServerIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "An unique value for each Printer Access Protocol
+        Server."
+    ::= { papServerEntry 1 }
+
+papServerListeningSocket OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The Server Listening Socket that this PAP server is
+        listening on."
+    ::= { papServerEntry 2 }
+
+papServerStatus OBJECT-TYPE
+    SYNTAX DisplayString
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The status string of this server.  This is the
+        message as it would appear in a PAP Status Reply
+        from this server."
+    ::= { papServerEntry 3 }
+
+papServerCompletedJobs OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of jobs that have been accepted and
+        successfully executed by this server."
+    ::= { papServerEntry 4 }
+
+papServerBusyJobs OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of GetNextJob calls that have accepted
+        and are currently executing a job."
+    ::= { papServerEntry 5 }
+
+papServerFreeJobs OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The minimum number of GetNextJob calls that are
+        currently waiting for a job."
+    ::= { papServerEntry 6 }
+
+papServerAuthenticationFailures OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this PAP server rejected a job
+        because the job was not correctly authenticated."
+    ::= { papServerEntry 7 }
+
+papServerAccountingFailures OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this PAP server rejected a job
+        because the job did not fit some accounting rule,
+        such as exceeding a quota."
+    ::= { papServerEntry 8 }
+
+papServerGeneralFailures OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this PAP server rejected a job
+        for some reason other than authentication or
+        accounting failures."
+    ::= { papServerEntry 9 }
+
+papServerState OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The state of this PAP Server entry.
+
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in
+        the papServerTable.  That is, it  effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant papServerState
+        object."
+    ::= { papServerEntry 10 }
+
+papServerLastStatusMsg OBJECT-TYPE
+    SYNTAX DisplayString
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The last status message that was transmitted by
+        this server."
+    ::= { papServerEntry 11 }
+
+-- The ASP Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement ASP
+
+aspInputTransactions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ASP requests and replies received by
+        this entity.  Note that this is not necessarily the
+        number of packets containing ASP transactions."
+    ::= { asp 1 }
+
+aspOutputTransactions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ASP requests and replies sent by this
+        entity.  Note that this is not necessarily the number
+        of packets containing ASP transactions."
+    ::= { asp 2 }
+
+aspInOpenSessions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ASP Open Session requests and replies
+        received by this entity."
+    ::= { asp 3 }
+
+aspOutOpenSessions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ASP Open Session requests and replies
+        sent by this entity."
+    ::= { asp 4 }
+
+aspInCloseSessions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ASP Close Session requests and replies
+        received by this entity."
+    ::= { asp 5 }
+
+aspOutCloseSessions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ASP Close Session requests and replies
+        sent by this entity."
+   ::= { asp 6 }
+
+aspNoMoreSessionsErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times an error condition was returned
+        because this server implementation could not support
+        another session."
+    ::= { asp 7 }
+
+aspTickleTimeOutCloses OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the ASP entity on this node
+        closed a connection because it didn't receive any
+        messages from the remote end before its timer
+        expired."
+    ::= { asp 8 }
+
+aspConnTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AspConnEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A list of ASP connections on this entity."
+    ::= { asp 9 }
+
+aspConnEntry OBJECT-TYPE
+    SYNTAX AspConnEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A set of information describing an ASP connection.
+
+        As an example, an instance of the aspConnState object
+        might be named
+        aspConnState.0.80.220.135.0.80.239.119.12"
+    INDEX { aspConnLocalAddress, aspConnRemoteAddress,
+            aspConnID }
+    ::= { aspConnTable 1 }
+
+AspConnEntry ::= SEQUENCE {
+    aspConnLocalAddress        DdpSocketAddress,
+    aspConnRemoteAddress       DdpSocketAddress,
+    aspConnID                  INTEGER (1..255),
+    aspConnLastReqNum          INTEGER (1..65535),
+    aspConnServerEnd           INTEGER,
+    aspConnState               INTEGER
+}
+
+aspConnLocalAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The local address of this ASP connection."
+    ::= { aspConnEntry 1 }
+
+aspConnRemoteAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The remote address of this ASP connection.  If
+        this entry is in the listening mode, this object
+        shall have a value of four octets of zero."
+    ::= { aspConnEntry 2 }
+
+aspConnID OBJECT-TYPE
+    SYNTAX INTEGER (1..255)
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The remote Connection ID of this ASP connection.  If
+        this entry is in the listening mode, this object
+        shall have a value of zero."
+    ::= { aspConnEntry 3 }
+
+aspConnLastReqNum  OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The last request number on this ASP connection.  If
+        this entry is in the listening mode, this object
+        shall have a value of zero."
+    ::= { aspConnEntry 4 }
+
+aspConnServerEnd OBJECT-TYPE
+    SYNTAX INTEGER {
+        sss(1), -- Server Session Socket
+        wss(2), -- Workstation Session Socket
+        sls(3)  -- Server Listening Socket
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "Specifies what mode the local session end is in."
+    ::= { aspConnEntry 5 }
+
+aspConnState OBJECT-TYPE
+    SYNTAX INTEGER {
+        open(1),
+        closed(2),
+        invalid(3)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The state of this ASP connection.
+        Setting this object to the value invalid(3) has the
+        effect of invalidating the corresponding entry in the
+        aspConnTable.  That is, it  effectively disassociates
+        the mapping identified with said entry.  It is an
+        implementation-specific matter as to whether the agent
+        removes an invalidated entry from the table.
+
+        Accordingly, management stations must be prepared to
+        receive from agents tabular information corresponding
+        to entries not currently in use.  Proper
+        interpretation of such entries requires examination
+        of the relevant aspConnState object."
+    ::= { aspConnEntry 6 }
+
+-- The ADSP Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement ADSP
+
+adspInPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ADSP packets received by this entity."
+    ::= { adsp 1 }
+
+adspOutPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ADSP packets sent by this entity."
+    ::= { adsp 2 }
+
+adspInOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of data octets contained in ADSP packets
+        received by this entity.  Note that this does not
+        include EOM bits."
+    ::= { adsp 3 }
+
+adspOutOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of data octets contained in ADSP packets
+        sent by this entity.  Note that this does not include
+        EOM bits."
+    ::= { adsp 4 }
+
+adspInDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ADSP data packets this entity has
+        received."
+    ::= { adsp 5 }
+
+adspOutDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ADSP data packets this entity has
+        sent."
+    ::= { adsp 6 }
+
+adspTimeoutErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the ADSP on this entity detected
+        an expired connection timer."
+    ::= { adsp 7 }
+
+adspTimeoutCloseErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times the ADSP on this entity closed a
+        connection because of too many timeouts."
+    ::= { adsp 8 }
+
+adspConnTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AdspConnEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A list of ADSP connections on this entity."
+    ::= { adsp 9 }
+
+adspConnEntry OBJECT-TYPE
+    SYNTAX AdspConnEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A set of information describing an ADSP connection.
+        As an example, an instance of the adspConnState object
+        might be named
+        adspConnState.0.80.220.7.0.80.239.142.31231"
+    INDEX { adspConnLocalAddress, adspConnRemoteAddress,
+            adspConnLocalConnID }
+    ::= { adspConnTable 1 }
+
+AdspConnEntry ::= SEQUENCE {
+    adspConnLocalAddress        DdpSocketAddress,
+    adspConnLocalConnID         INTEGER (0..65535),
+    adspConnRemoteAddress       DdpSocketAddress,
+    adspConnRemoteConnID        INTEGER (0..65535),
+    adspConnState               INTEGER
+}
+
+adspConnLocalAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The local DDP address of this ADSP connection."
+    ::= { adspConnEntry 1 }
+
+adspConnLocalConnID OBJECT-TYPE
+    SYNTAX INTEGER (0..65535)
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The local Connection ID of this ADSP connection.  If
+        this entry specifies an ADSP listener, this value
+        shall be zero."
+    ::= { adspConnEntry 2 }
+
+adspConnRemoteAddress OBJECT-TYPE
+    SYNTAX DdpSocketAddress
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The remote DDP address of this ADSP connection.  If
+        this entry specifies an ADSP listener, this value
+        shall be zero."
+    ::= { adspConnEntry 3 }
+
+adspConnRemoteConnID OBJECT-TYPE
+    SYNTAX INTEGER (0..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The remote Connection ID of this ADSP connection.
+        If this entry specifies an ADSP listener, this value
+        shall be zero."
+    ::= { adspConnEntry 4 }
+
+adspConnState OBJECT-TYPE
+    SYNTAX INTEGER {
+        open(1),
+        localHalfOpen(2),
+        remoteHalfOpen(3),
+        listening(4),
+        closed(5),
+        invalid(6)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The state of this ADSP connection.  The state is
+        open if both ends are established.  If only one end
+        is established, then the state is half-open.  If
+        neither end is established, then the state is
+        closed.  If an ADSP server is listening on a socket
+        and is not yet connected, its state is set to
+        listening, and the adspConnRemoteAddress,
+        adspConnRemoteSocket, adspConnRemoteConnID, and
+        adspConnRemoteWindowSize are all set to zero.
+
+        Setting this object to the value invalid(6) has the
+        effect of invalidating the corresponding entry in
+        the adspConnTable.  That is, it  effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examination of the relevant adspConnState
+        object."
+    ::= { adspConnEntry 5 }
+
+-- The ATPortPtoP Group
+--
+-- Implementation of this group is mandatory for all entities
+-- that implement AppleTalk point-to-point links
+
+atportPtoPTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AtportPtoPEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A list of AppleTalk point-to-point connections for
+        this entity."
+    ::= { atportptop 1 }
+
+atportPtoPEntry OBJECT-TYPE
+    SYNTAX AtportPtoPEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The description of one of the AppleTalk
+        point-to-point connections on this entity.
+
+        As an example, an instance of the
+        atportPtoPRemoteAddress object might be named
+        atportPtoPRemoteAddress.2"
+    INDEX { atportPtoPIndex }
+    ::= { atportPtoPTable 1 }
+
+AtportPtoPEntry ::= SEQUENCE {
+    atportPtoPIndex           INTEGER,
+    atportPtoPProtocol        OBJECT IDENTIFIER,
+    atportPtoPRemoteName      DisplayString,
+    atportPtoPRemoteAddress   OCTET STRING,
+    atportPtoPPortIndex       INTEGER,
+    atportPtoPStatus          INTEGER
+}
+
+atportPtoPIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "A unique value for each AppleTalk point-to-point
+        connection.  Its value is between 1 and the total
+        number of AppleTalk point-to-point connections.  The
+        value for each connection must remain constant at
+        least from the re-initialization of the entity's
+        network management system to the next
+
+        re-initialization."
+    ::= { atportPtoPEntry 1 }
+
+atportPtoPProtocol OBJECT-TYPE
+    SYNTAX OBJECT IDENTIFIER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The protocol type used over the point-to-point
+        connection."
+    ::= { atportPtoPEntry 2 }
+
+atportPtoPRemoteName OBJECT-TYPE
+    SYNTAX DisplayString
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "A text string containing the network node name of the
+        entity at the other end of the point-to-point link.
+        If the name is unknown or undefined, then this
+        string is zero length."
+    ::= { atportPtoPEntry 3 }
+
+atportPtoPRemoteAddress OBJECT-TYPE
+    SYNTAX OCTET STRING
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The network address of the entity at the other end
+        of the point-to-point link in network byte order.
+        The format of this address can be determined
+        by examinating the atportType corresponding to this
+        entry.  If the address is unknown or undefined, then
+        this string is zero length."
+    ::= { atportPtoPEntry 4 }
+
+atportPtoPPortIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The AppleTalk port associated with this
+        point-to-point connection.  The interface identified
+        by a particular value of this index is the same
+        interface as identified by the same value of
+        atportIndex."
+    ::= { atportPtoPEntry 5 }
+
+atportPtoPStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        valid(1),
+        invalid(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+        "The status of this entry in the atportPtoPTable.
+
+        Setting this object to the value invalid(2) has the
+        effect of invalidating the corresponding entry in
+        the atportPtoPTable.  That is, it  effectively
+        disassociates the mapping identified with said
+        entry.  It is an implementation-specific matter as
+        to whether the agent removes an invalidated entry
+        from the table. Accordingly, management stations
+        must be prepared to receive from agents tabular
+        information corresponding to entries not currently
+        in use.  Proper interpretation of such entries
+        requires examinationr of the relevant
+        atportPtoPStatus object."
+    ::= { atportPtoPEntry 6 }
+
+atportPtoPProtoOids OBJECT IDENTIFIER ::= { atportptop 2 }
+
+-- A list of values to be used for the atportPtoPProtocol
+-- variable.
+-- When new protocols are defined, their oids may be defined
+-- in separate MIB documents in different branches of the tree.
+
+pToPProtoOther OBJECT IDENTIFIER ::= { atportPtoPProtoOids 1 }
+pToPProtoAurp OBJECT IDENTIFIER ::= { atportPtoPProtoOids 2 }
+pToPProtoCaymanUdp OBJECT IDENTIFIER ::=
+            { atportPtoPProtoOids 3 }
+pToPProtoAtkvmsDecnetIV OBJECT IDENTIFIER ::=
+            { atportPtoPProtoOids 4 }
+pToPProtoLiaisonUdp OBJECT IDENTIFIER ::=
+            { atportPtoPProtoOids 5 }
+pToPProtoIpx OBJECT IDENTIFIER ::= { atportPtoPProtoOids 6 }
+pToPProtoShivaIp OBJECT IDENTIFIER ::=
+            { atportPtoPProtoOids 7 }
+
+-- The Per Port Counters Group
+--
+-- Implementation of this group is optional.
+
+perPortTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PerPortEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The table of per-port statistics for this entity."
+    ::= { perPort 1 }
+
+perPortEntry OBJECT-TYPE
+    SYNTAX PerPortEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+        "The statistics available for a particular port on
+        this entity.
+
+        As an example, an instance of the perPortAarpInProbes
+        object might be named perPortAarpInProbes.2"
+    INDEX { atportIndex }
+    ::= { perPortTable  1 }
+
+PerPortEntry ::= SEQUENCE {
+    perPortAarpInProbes             Counter,
+    perPortAarpOutProbes            Counter,
+    perPortAarpInReqs               Counter,
+    perPortAarpOutReqs              Counter,
+    perPortAarpInRsps               Counter,
+    perPortAarpOutRsps              Counter,
+    perPortDdpInReceives            Counter,
+    perPortDdpInLocalDatagrams      Counter,
+    perPortDdpNoProtocolHandlers    Counter,
+    perPortDdpTooShortErrors        Counter,
+    perPortDdpTooLongErrors         Counter,
+    perPortDdpChecksumErrors        Counter,
+    perPortDdpForwRequests          Counter,
+    perPortRtmpInDataPkts           Counter,
+    perPortRtmpOutDataPkts          Counter,
+    perPortRtmpInRequestPkts        Counter,
+    perPortRtmpRouteDeletes         Counter,
+    perPortZipInZipQueries          Counter,
+    perPortZipInZipReplies          Counter,
+    perPortZipInZipExtendedReplies  Counter,
+    perPortZipZoneConflictErrors    Counter,
+    perPortZipInErrors              Counter,
+    perPortNbpInLookUpRequests      Counter,
+    perPortNbpInLookUpReplies       Counter,
+    perPortNbpInBroadcastRequests   Counter,
+    perPortNbpInForwardRequests     Counter,
+    perPortNbpOutLookUpReplies      Counter,
+    perPortNbpRegistrationFailures  Counter,
+    perPortNbpInErrors              Counter,
+    perPortEchoRequests             Counter,
+    perPortEchoReplies              Counter
+}
+
+perPortAarpInProbes OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of AARP Probe packets received
+        by this entity on this port."
+    ::= { perPortEntry 1 }
+
+perPortAarpOutProbes OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of AARP Probe packets sent by
+        this entity on this port."
+    ::= { perPortEntry 2 }
+
+perPortAarpInReqs OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of AARP Request packets received
+        by this entity on this port."
+    ::= { perPortEntry 3 }
+
+perPortAarpOutReqs OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of AARP Request packets sent by
+        this entity on this port."
+    ::= { perPortEntry 4 }
+
+perPortAarpInRsps OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of AARP Response packets received
+        by this entity on this port."
+    ::= { perPortEntry 5 }
+
+perPortAarpOutRsps OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of AARP Response packets sent by
+        this entity on this port."
+    ::= { perPortEntry 6 }
+
+perPortDdpInReceives OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input datagrams received by DDP
+        on this port, including those received in error."
+    ::= { perPortEntry 7 }
+
+perPortDdpInLocalDatagrams OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams on this
+        port for which this entity was their final DDP
+        destination."
+    ::= { perPortEntry 8 }
+
+perPortDdpNoProtocolHandlers OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of DDP datagrams addressed to this
+        entity on this port that were addressed to an upper
+        layer protocol for which no protocol handler
+        existed."
+    ::= { perPortEntry 9 }
+
+perPortDdpTooShortErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams on this
+        port dropped because the received data length was
+        less than the data length specified in the DDP
+        header or the received data length was less than the
+        length of the expected DDP header."
+    ::= { perPortEntry 10 }
+
+perPortDdpTooLongErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams on this
+        port dropped because they exceeded the maximum DDP
+        datagram size."
+    ::= { perPortEntry 11 }
+
+perPortDdpChecksumErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The total number of input DDP datagrams on this
+        port for which this DDP entity was their final
+        destination, and which were dropped because of a
+        checksum error." ::= { perPortEntry 12 }
+
+perPortDdpForwRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of input datagrams on this port for
+        which this entity was not their final DDP
+        destination, as a result of which an attempt was
+        made to find a route to forward them to that final
+        destination."
+    ::= { perPortEntry 13 }
+
+perPortRtmpInDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of good RTMP data packets
+        received by this entity on this port."
+    ::= { perPortEntry 14 }
+
+perPortRtmpOutDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of RTMP packets sent by this
+        entity on this port."
+    ::= { perPortEntry 15 }
+
+perPortRtmpInRequestPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of good RTMP Request packets
+        received by this entity on this port."
+    ::= { perPortEntry 16 }
+
+perPortRtmpRouteDeletes OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "A count of the number of times RTMP deletes a route
+        on this port because it was aged out of the table."
+    ::= { perPortEntry 17 }
+
+perPortZipInZipQueries OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Queries received by this entity
+        on this port."
+    ::= { perPortEntry 18 }
+
+perPortZipInZipReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Replies received by this entity
+        on this port."
+    ::= { perPortEntry 19 }
+
+perPortZipInZipExtendedReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP Extended Replies received by this
+        entity on this port."
+    ::= { perPortEntry 20 }
+
+perPortZipZoneConflictErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times a conflict has been detected on
+        this port between this entity's zone information and
+        another entity's zone information."
+    ::= { perPortEntry 21 }
+
+perPortZipInErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of ZIP packets received by this entity
+        on this port that were rejected for any error."
+    ::= { perPortEntry 22 }
+
+perPortNbpInLookUpRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP LookUp Requests received on this
+        port."
+    ::= { perPortEntry 23 }
+
+perPortNbpInLookUpReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP LookUp Replies received on this
+
+        port."
+    ::= { perPortEntry 24 }
+
+perPortNbpInBroadcastRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP Broadcast Requests received on
+        this port."
+    ::= { perPortEntry 25 }
+
+perPortNbpInForwardRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP Forward Requests received on this
+        port."
+    ::= { perPortEntry 26 }
+
+perPortNbpOutLookUpReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP LookUp Replies sent on this port."
+    ::= { perPortEntry 27 }
+
+perPortNbpRegistrationFailures OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of times this node experienced a failure
+        in attempting to register an NBP entity on this
+        port."
+    ::= { perPortEntry 28 }
+
+perPortNbpInErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of NBP packets received by this entity
+        on this port that were rejected for any error."
+    ::= { perPortEntry 29 }
+
+perPortEchoRequests OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The number of AppleTalk Echo requests received on
+        this port."
+    ::= { perPortEntry 30 }
+
+perPortEchoReplies OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+        "The count of AppleTalk Echo replies received on
+        this port."
+    ::= { perPortEntry 31 }
+
+END
diff --git a/snmp_builder/mibs/APPLICATION-MIB.mib b/snmp_builder/mibs/APPLICATION-MIB.mib
new file mode 100644
index 0000000..d6178dc
--- /dev/null
+++ b/snmp_builder/mibs/APPLICATION-MIB.mib
@@ -0,0 +1,2995 @@
+APPLICATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+        Counter64, Counter32, Gauge32,
+        mib-2, Unsigned32, zeroDotZero   FROM SNMPv2-SMI
+
+    DateAndTime, TEXTUAL-CONVENTION,
+        TestAndIncr, TDomain,
+        TimeStamp, TruthValue            FROM SNMPv2-TC
+
+    SnmpAdminString                      FROM SNMP-FRAMEWORK-MIB
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+                                         FROM SNMPv2-CONF
+
+    LongUtf8String, sysApplElmtRunIndex  FROM SYSAPPL-MIB;
+
+applicationMib MODULE-IDENTITY
+    LAST-UPDATED "9811171815Z"
+    ORGANIZATION "Application MIB Working Group"
+    CONTACT-INFO
+       "http://www.ietf.org/html.charters/applmib-charter.html
+
+        Randy Presuhn
+        BMC Software, Inc.
+        965 Stewart Drive
+        Sunnyvale, CA 94086
+        USA
+
+        Telephone: +1 408 616-3100
+        Facsimile: +1 408 616-3101
+        EMail: randy_presuhn@bmc.com
+       "
+    DESCRIPTION
+       "This MIB defines objects representing generic aspects of
+        applications that are of interest to management but typically
+        require instrumentation within managed application elements.
+       "
+    ::= { mib-2 62 }
+
+--
+--      Registration hierarchy for this MIB
+--
+applicationMibObjects OBJECT IDENTIFIER ::=
+                         { applicationMib 1 }
+
+applicationMibConformance OBJECT IDENTIFIER ::=
+                         { applicationMib 2 }
+
+--
+--      Groups defined in this MIB
+--
+applServiceGroup OBJECT IDENTIFIER ::=
+                         { applicationMibObjects 1 }
+
+applChannelGroup OBJECT IDENTIFIER ::=
+                         { applicationMibObjects 2 }
+
+applPastChannelGroup OBJECT IDENTIFIER ::=
+                         { applicationMibObjects 3 }
+
+applElmtRunControlGroup OBJECT IDENTIFIER ::=
+                         { applicationMibObjects 4 }
+
+Unsigned64TC ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "A non-negative 64-bit bit integer, without counter
+         semantics."
+    SYNTAX Counter64
+
+ApplTAddress ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+          "Denotes a transport service address.
+
+          For snmpUDPDomain, an ApplTAddress is 6 octets long,
+          the initial 4 octets containing the IP-address in
+          network-byte order and the last 2 containing the UDP
+          port in network-byte order.  Consult 'Transport Mappings
+          for Version 2 of the Simple Network Management Protocol
+          (SNMPv2)' for further information on snmpUDPDomain."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+-- ****************************************************************
+--
+--      applServiceGroup -
+--
+--      The service-level tables permit the identification of one
+--      or more instances of named services on a system, and the
+--      association of running application elements to services.
+--
+-- ****************************************************************
+
+-- ****************************************************************
+--
+--      The service name to service instance table
+--
+-- ****************************************************************
+
+applSrvNameToSrvInstTable OBJECT-TYPE
+        SYNTAX            SEQUENCE OF ApplSrvNameToSrvInstEntry
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+           "The service name to service instance table uses
+            service name as its primary key, and service instance
+            identifier as its secondary key.  It facilitates the
+            identification and lookup of the instances of a given
+            service in a system."
+        ::= { applServiceGroup 1 }
+
+applSrvNameToSrvInstEntry OBJECT-TYPE
+        SYNTAX            ApplSrvNameToSrvInstEntry
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+           "An applSrvNameToSrvInstEntry identifies an instance of
+            a given service.  The allocation and reservation
+            of unique values for applSrvIndex is an administrative
+            issue.
+
+            An applSrvNameToSrvInstEntry exists for the lifetime of
+            that instance of that service; the index values may not
+            change during that lifetime.  "
+        INDEX { applSrvName, applSrvIndex }
+        ::= { applSrvNameToSrvInstTable 1 }
+
+ApplSrvNameToSrvInstEntry ::= SEQUENCE
+        {
+                applSrvInstQual SnmpAdminString
+        }
+
+applSrvInstQual         OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "The value of applSrcInstQual provides additional
+            information about this particular instance of this
+            service.
+
+            Although not used for indexing purposes, the value of
+            this attribute should be sufficiently unique to be
+            helpful to an administrator in distinguishing among
+            service instances.  "
+        ::= { applSrvNameToSrvInstEntry 1 }
+
+-- ****************************************************************
+--
+--      Service instance to Service Name table
+--
+-- ****************************************************************
+
+applSrvInstToSrvNameTable OBJECT-TYPE
+        SYNTAX            SEQUENCE OF ApplSrvInstToSrvNameEntry
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+           "The service instance to service name table uses
+            service instance identifier as its primary key, and
+            service name as its secondary key.  Given a service
+            instance identifier, it facilitates the lookup of the
+            name of the service being provided."
+        ::= { applServiceGroup 2 }
+
+applSrvInstToSrvNameEntry OBJECT-TYPE
+        SYNTAX            ApplSrvInstToSrvNameEntry
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+           "An applSrvInstToSrvNameEntry maps a service instance
+            identifier back to a service name."
+        INDEX { applSrvIndex, applSrvName }
+        ::= { applSrvInstToSrvNameTable 1 }
+
+ApplSrvInstToSrvNameEntry ::= SEQUENCE
+        {
+                applSrvName     SnmpAdminString
+        }
+
+applSrvName        OBJECT-TYPE
+        SYNTAX     SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+           "The human-readable name of a service.  Where
+            appropriate, as in the case where a service can be
+            identified in terms of a single protocol, the strings
+            should be established names such as those assigned by
+            IANA and found in STD 2 [13], or defined by some other
+            authority.  In some cases private conventions apply
+            and the string should in these cases be consistent
+            with these non-standard conventions.   An applicability
+            statement may specify the service name(s) to be used.
+           "
+        ::= { applSrvInstToSrvNameEntry 1 }
+
+-- ****************************************************************
+--
+--      The service instance to running application element table
+--
+-- ****************************************************************
+
+applSrvInstToRunApplElmtTable OBJECT-TYPE
+        SYNTAX            SEQUENCE OF ApplSrvInstToRunApplElmtEntry
+        MAX-ACCESS            not-accessible
+        STATUS                current
+        DESCRIPTION
+           "The service instance to running application element
+            table uses the service instance identifier as its primary
+            key, and the running application element index as its
+            secondary key.  This facilitates the identification
+
+            of the set of running application elements providing a
+            given instance of a service."
+        ::= { applServiceGroup 3 }
+
+applSrvInstToRunApplElmtEntry OBJECT-TYPE
+        SYNTAX                ApplSrvInstToRunApplElmtEntry
+        MAX-ACCESS            not-accessible
+        STATUS                current
+        DESCRIPTION
+           "An applSrvInstToRunApplElmtEntry identifies a running
+            application element providing an instance of a service.
+            Note that there may be multiple running application
+            elements involved in the provision of an instance of
+            a service."
+        INDEX { applSrvIndex, sysApplElmtRunIndex }
+        ::= { applSrvInstToRunApplElmtTable 1 }
+
+ApplSrvInstToRunApplElmtEntry ::= SEQUENCE
+        {
+                applSrvIndex       Unsigned32
+        }
+
+applSrvIndex        OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..'ffffffff'h)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "An applSrvIndex is the system-unique identifier of
+             an instance of a service.  The value is unique not only
+             across all instances of a given service, but also across
+             all services in a system.
+
+             Re-use of values for this index should be avoided.
+             No two service instances in a given system shall
+             concurrently have the same value for this index.
+
+             The value zero is excluded from the set of permitted
+             values for this index.  This allows other tables to
+             potentially represent things which cannot be associated
+             with a specific service instance.
+            "
+        ::= { applSrvInstToRunApplElmtEntry 1 }
+
+-- ****************************************************************
+--
+--      The running application element to service instance table
+--
+-- ****************************************************************
+
+applRunApplElmtToSrvInstTable OBJECT-TYPE
+        SYNTAX           SEQUENCE OF ApplRunApplElmtToSrvInstEntry
+        MAX-ACCESS            not-accessible
+        STATUS                current
+        DESCRIPTION
+           "The running application element to service instance
+            table uses the running application element index as
+            its primary key and the service instance identifier as
+            its secondary key.  It identifies the set of services
+            provided by a given running application element."
+        ::= { applServiceGroup 4 }
+
+applRunApplElmtToSrvInstEntry OBJECT-TYPE
+        SYNTAX                ApplRunApplElmtToSrvInstEntry
+        MAX-ACCESS            not-accessible
+        STATUS                current
+        DESCRIPTION
+           "An applRunApplElmtToSrvInstEntry serves to identify an
+            instance of a service being provided by a given running
+            application element.  Note that a particular running
+            application element may provide multiple services."
+        INDEX { sysApplElmtRunIndex, applSrvInstance }
+        ::= { applRunApplElmtToSrvInstTable 1 }
+
+ApplRunApplElmtToSrvInstEntry ::= SEQUENCE
+        {
+                applSrvInstance         Unsigned32
+        }
+
+applSrvInstance    OBJECT-TYPE
+        SYNTAX     Unsigned32 (1..'ffffffff'h)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+           "An applSrvInstance is the system-unique identifier of an
+            instance of a service.  The value is unique not only
+            across all instances of a given service, but also across
+            all services.
+
+            Re-use of values for this index should be avoided.
+            No two service instances in a given system shall
+            concurrently have the same value for this index.
+
+            The value zero is excluded from the set of permitted
+            values for this index.  This allows other tables to
+            potentially represent things which cannot be associated
+            with a specific service instance.
+
+            This attribute is semantically identical to
+            applSrvIndex."
+        ::= { applRunApplElmtToSrvInstEntry  1 }
+
+-- ****************************************************************
+--
+--      applChannelGroup - group with tables for I/O
+--
+--      In this group, the common abstraction is the Channel.
+--      Channels are realized as files or connections.
+--      The information flowing on a channel can always be
+--      measured in terms of a byte stream.  Furthermore, for many
+--      channels, this information may also be measured in terms
+--      of transactions.
+--
+--      For all of these tables, the first two indexes determines
+--      whether what is being measured is for a single running
+--      application element or for an instance of a service.
+--
+--      The second index identifies the running application element
+--      or service instance.
+--
+--      The third index is the channel id, which uniquely identifies
+--      a channel within the context of a running application element
+--      or service instance.
+--
+--      Any remaining indexes are table-specific.
+--
+-- ****************************************************************
+
+-- ****************************************************************
+--
+--      applOpenChannelTable - Table of Open Channels
+--
+-- ****************************************************************
+
+applOpenChannelTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF ApplOpenChannelEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+           "The applOpenChannelTable reports information on open
+            channels for running application elements
+            and for service instances.  This table is
+            indexed by applElmtOrSvc, applElmtOrSvcId, and
+            applOpenChannelIndex. This effectively groups all
+            entries for a given running application element
+            or service instance together.  ApplChannelIndex uniquely
+            identifies an open channel (and, consequently, a file
+            or connection) within the context of a particular
+            running application element or service instance.
+
+            Some of the information in this table is available
+            through both sixty-four and thirty-two bit counters.
+            The sixty-four bit counters are not accessible in
+            protocols that do not support this data type."
+        ::= { applChannelGroup 1 }
+
+applOpenChannelEntry OBJECT-TYPE
+        SYNTAX       ApplOpenChannelEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+           "An applOpenChannelEntry indicates that a channel has been
+            opened by this running application element or service
+            instance and is still open.  Note that if a file has been
+            opened multiple times, even by the same process, it will
+            have multiple channel entries."
+        INDEX           { applElmtOrSvc, applElmtOrSvcId,
+                          applOpenChannelIndex }
+        ::= { applOpenChannelTable 1 }
+
+ApplOpenChannelEntry  ::= SEQUENCE
+        {
+                applElmtOrSvc                      INTEGER,
+                applElmtOrSvcId                    Unsigned32,
+                applOpenChannelIndex               Unsigned32,
+                applOpenChannelOpenTime            TimeStamp,
+                applOpenChannelReadRequests        Counter64,
+                applOpenChannelReadRequestsLow     Counter32,
+                applOpenChannelReadFailures        Counter32,
+                applOpenChannelBytesRead           Counter64,
+                applOpenChannelBytesReadLow        Counter32,
+                applOpenChannelLastReadTime        DateAndTime,
+                applOpenChannelWriteRequests       Counter64,
+                applOpenChannelWriteRequestsLow    Counter32,
+                applOpenChannelWriteFailures       Counter32,
+                applOpenChannelBytesWritten        Counter64,
+                applOpenChannelBytesWrittenLow     Counter32,
+                applOpenChannelLastWriteTime       DateAndTime
+        }
+
+applElmtOrSvc      OBJECT-TYPE
+        SYNTAX     INTEGER { service(1),
+                             element(2) }
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+           "The applElmtOrSvc attribute serves as an index for tables
+            that can hold information both for individual running
+            application elements as well as for service instances.
+
+            If the value is service(1), the row contains information
+            gathered at the level of a service.
+
+            If the value is element(2), the row contains information
+            for an individual running application element."
+        ::= { applOpenChannelEntry 1 }
+
+applElmtOrSvcId    OBJECT-TYPE
+        SYNTAX     Unsigned32 (1..'ffffffff'h)
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+           "The applElmtOrSvcId attribute is used as an index in
+            conjunction with the applElmtOrSvc attribute.
+
+            When the value of applElmtOrSvc is service(1), this
+            attribute's value corresponds to that of applSrvIndex,
+            when the value of applElmtOrSvc is element(2), this
+            attribute's value corresponds to sysApplElmtRunIndex."
+        ::= { applOpenChannelEntry 2 }
+
+applOpenChannelIndex OBJECT-TYPE
+        SYNTAX       Unsigned32
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+           "This attribute serves to uniquely identify this open
+            connection in the context of the running application
+            element or service instance.  Where suitable, the
+            application's native descriptor number should be used."
+        ::= { applOpenChannelEntry 3 }
+
+applOpenChannelOpenTime OBJECT-TYPE
+        SYNTAX          TimeStamp
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This attribute records the value of sysUpTime.0
+            when this channel was opened and this entry was added to
+            this table.  This attribute serves as a discontinuity
+            indicator for the counter attributes in this entry
+            and for any corresponding entries in the
+            applOpenConnectionTable, applOpenFileTable, and the
+            applTransactionStreamTable."
+        ::= { applOpenChannelEntry 4 }
+
+applOpenChannelReadRequests OBJECT-TYPE
+        SYNTAX              Counter64
+        UNITS               "read requests"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the number of read requests
+            for this channel.  All read requests for this channel
+            by this entity, regardless of completion status, are
+            included in this count.
+
+            Read requests are counted in terms of system calls,
+            rather than API calls.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 5 }
+
+applOpenChannelReadRequestsLow OBJECT-TYPE
+        SYNTAX                 Counter32
+        UNITS                  "read requests"
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+           "This attribute reports the low thirty-two bits of
+            applOpenChannelReadRequests.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 6 }
+
+applOpenChannelReadFailures OBJECT-TYPE
+        SYNTAX              Counter32
+        UNITS               "failed read requests"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the number of failed read
+            requests.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 7 }
+
+applOpenChannelBytesRead OBJECT-TYPE
+        SYNTAX           Counter64
+        UNITS            "bytes"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "This attribute reports the number of bytes read from
+            this channel.  Only bytes successfully read are included
+            in this count.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 8 }
+
+applOpenChannelBytesReadLow OBJECT-TYPE
+        SYNTAX              Counter32
+        UNITS               "bytes"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two bits
+            of applOpenChannelBytesRead.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 9 }
+
+applOpenChannelLastReadTime OBJECT-TYPE
+        SYNTAX              DateAndTime
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the time of the most recent read
+            request made by this entity, regardless of completion
+            status, for this open channel.
+
+            If no read requests have been made the value of this
+            attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applOpenChannelEntry 10 }
+
+applOpenChannelWriteRequests OBJECT-TYPE
+        SYNTAX               Counter64
+        UNITS                "write requests"
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "This attribute reports the number of write requests for
+            this channel made by this entity.  All write requests
+            for this channel, regardless of completion status, are
+            included in this count.
+
+            Write requests are counted in terms of system calls,
+            rather than API calls.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 11 }
+
+applOpenChannelWriteRequestsLow OBJECT-TYPE
+        SYNTAX                  Counter32
+        UNITS                   "write requests"
+        MAX-ACCESS              read-only
+        STATUS                  current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two bits
+            of applOpenChannelWriteRequests.
+
+            Discontinuities in this counter can be detected
+            by monitoring the applOpenChannelOpenTime value for
+            this entry."
+        ::= { applOpenChannelEntry 12 }
+
+applOpenChannelWriteFailures OBJECT-TYPE
+        SYNTAX               Counter32
+        UNITS                "failed write requests"
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "This attribute reports the number of failed write
+            requests.
+
+            Discontinuities in this counter can be detected
+            by monitoring the applOpenChannelOpenTime value for
+            this entry."
+        ::= { applOpenChannelEntry 13 }
+
+applOpenChannelBytesWritten OBJECT-TYPE
+        SYNTAX              Counter64
+        UNITS               "bytes"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the number of bytes written to
+            this channel.  Only bytes successfully written (without
+            errors reported by the system to the API in use by the
+            application) are included in this count.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 14 }
+
+applOpenChannelBytesWrittenLow OBJECT-TYPE
+        SYNTAX                 Counter32
+        UNITS                  "bytes"
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two bits
+            of applOpenChannelBytesWritten.
+
+            Discontinuities in this counter can be detected by
+            monitoring the applOpenChannelOpenTime value for this
+            entry."
+        ::= { applOpenChannelEntry 15 }
+
+applOpenChannelLastWriteTime OBJECT-TYPE
+        SYNTAX               DateAndTime
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "This attribute reports the time of the most recent write
+            request made by this running application element or
+            service instance, regardless of completion status, for
+            this open channel.
+
+            If no write requests have been made, the value
+            of this attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applOpenChannelEntry 16 }
+
+-- ****************************************************************
+--
+--      applOpenFileTable - Table of Open Files
+--
+-- ****************************************************************
+
+applOpenFileTable  OBJECT-TYPE
+        SYNTAX     SEQUENCE OF ApplOpenFileEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+           "The applOpenFileTable reports information on open files
+            for service instances or application elements.  This
+            table is indexed by applElmtOrSvc and applElmtOrSvcId,
+            effectively grouping all entries for a given running
+            service instance or application element together, and
+            by applOpenChannelIndex, uniquely identifying an open
+            channel (and, consequently, a file) within the context
+            of a particular service instance or application element.
+
+            Elements in this table correspond to elements in the
+            applOpenChannelTable that represent files.  For rows in
+            the applOpenChannelTable that do not represent files,
+            corresponding rows in this table will not exist."
+        ::= { applChannelGroup 2 }
+
+applOpenFileEntry   OBJECT-TYPE
+        SYNTAX      ApplOpenFileEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "An applOpenFileEntry indicates that a file has been
+            opened by this running application element and is
+            still open.  Note that if a file has been opened
+            multiple times, even by the same process, it will have
+            multiple entries."
+        INDEX       { applElmtOrSvc, applElmtOrSvcId,
+                      applOpenChannelIndex }
+        ::= { applOpenFileTable 1 }
+
+ApplOpenFileEntry  ::= SEQUENCE
+        {
+                applOpenFileName                LongUtf8String,
+                applOpenFileSizeHigh            Unsigned32,
+                applOpenFileSizeLow             Unsigned32,
+                applOpenFileMode                INTEGER
+         }
+
+applOpenFileName   OBJECT-TYPE
+        SYNTAX     LongUtf8String
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+          "This attribute reports the name of this open file.
+           Wherever practical, a fully qualified path name should
+           be reported.
+
+           The values 'stdin', 'stdout', and 'stderr' are reserved
+           in accordance with common usage when the fully qualified
+           path name cannot be determined."
+        ::= { applOpenFileEntry 1 }
+
+applOpenFileSizeHigh OBJECT-TYPE
+        SYNTAX       Unsigned32
+        UNITS        "2^32 byte blocks"
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+          "This file's current size in 2^32 byte blocks.
+
+           For example, for a file with a total size of 4,294,967,296
+           bytes, this attribute would have a value of 1; for a file
+           with a total size of 4,294,967,295 bytes this attribute's
+           value would be 0."
+        ::= { applOpenFileEntry 2 }
+
+applOpenFileSizeLow OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "bytes"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "This file's current size modulo 2^32 bytes.
+
+            For example, for a file with a total size of
+            4,294,967,296 bytes this attribute would have a value
+            of 0; for a file with a total size of 4,294,967,295
+            bytes this attribute's value would be 4,294,967,295."
+        ::= { applOpenFileEntry 3 }
+
+applOpenFileMode   OBJECT-TYPE
+        SYNTAX     INTEGER { read(1),
+                             write(2),
+                             readWrite(3) }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+           "This attribute reports the current mode of this file from
+            the perspective of this running application element.
+
+            These values have the following meanings:
+
+                read(1) - file opened for reading only
+                write(2) - file opened for writing only
+                readWrite(3) - file opened for read and write.
+
+            These values correspond to the POSIX/ANSI C library
+            function fopen() 'type' parameter, using the following
+            mappings:
+
+                r -> read(1)
+                w -> write(2)
+                a -> write(2)
+                + -> readWrite(3)
+          "
+        ::= { applOpenFileEntry 4 }
+
+-- ****************************************************************
+--
+--      applOpenConnectionTable - Open Connection Table
+--
+-- ****************************************************************
+
+applOpenConnectionTable OBJECT-TYPE
+        SYNTAX          SEQUENCE OF ApplOpenConnectionEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The applOpenConnectionTable provides information about
+            open and listening connections from the perspective
+            of a running application element or service instance.
+            Entries in this table are indexed by applElmtOrSvc,
+            applElmtOrSvcID, and by applOpenChannelIndex, which
+            serves to uniquely identify each connection in the
+            context of a service instance or running application
+
+            element.
+
+            For each row in this table, a corresponding row will
+            exist in the applOpenChannel table.  For rows in the
+            applOpenChannelTable which do not represent open or
+            listening connections, no corresponding rows will exist
+            in this table."
+        ::= { applChannelGroup 3 }
+
+applOpenConnectionEntry OBJECT-TYPE
+        SYNTAX          ApplOpenConnectionEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An applOpenConnectionEntry indicates that a running
+            application element or service instance has an open
+            connection.  The entry has information describing that
+            connection.
+
+            In the case of a TCP transport, the element
+            applOpenConnectionNearEndAddr and that row's
+            applOpenConnectionFarEndAddr would correspond
+            to a tcpConnEntry.  For a UDP transport, a
+            similar relationship exists with respect to
+            a udpEntry."
+        INDEX           { applElmtOrSvc, applElmtOrSvcId,
+                          applOpenChannelIndex }
+        ::= { applOpenConnectionTable 1 }
+
+ApplOpenConnectionEntry  ::= SEQUENCE
+        {
+                applOpenConnectionTransport     TDomain,
+                applOpenConnectionNearEndAddr   ApplTAddress,
+                applOpenConnectionNearEndpoint  SnmpAdminString,
+                applOpenConnectionFarEndAddr    ApplTAddress,
+                applOpenConnectionFarEndpoint   SnmpAdminString,
+                applOpenConnectionApplication   SnmpAdminString
+        }
+
+applOpenConnectionTransport OBJECT-TYPE
+        SYNTAX              TDomain
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "The applOpenConnectionTransport attribute identifies the
+            transport protocol in use for this connection.  If it is
+            not practical to determine the underlying transport, this
+            attribute's value shall have a value of {0 0}."
+        DEFVAL { zeroDotZero }
+        ::= { applOpenConnectionEntry 1 }
+
+applOpenConnectionNearEndAddr OBJECT-TYPE
+        SYNTAX                ApplTAddress
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applOpenConnectionNearEndAddr attribute reports the
+            transport address and port information for the near end
+            of this connection.
+
+            If the value is not known, the value has a  length
+            of zero."
+        DEFVAL { "" }
+        ::= { applOpenConnectionEntry 2 }
+
+applOpenConnectionNearEndpoint OBJECT-TYPE
+        SYNTAX                 SnmpAdminString
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+           "The applOpenConnectionNearEndpoint attribute reports the
+            fully-qualified domain name and port information for the
+            near end of this connection.
+
+            The format of this attribute for TCP and UDP-based
+            protocols is the fully-qualified domain name immediately
+            followed by a colon which is immediately followed by
+            the decimal representation of the port number.
+
+            If the value is not known, the value has a  length
+            of zero."
+        DEFVAL { "" }
+        ::= { applOpenConnectionEntry 3 }
+
+applOpenConnectionFarEndAddr OBJECT-TYPE
+        SYNTAX               ApplTAddress
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "The applOpenConnectionFarEndAddr attribute reports the
+            transport address and port information for the far end
+            of this connection.
+
+            If not known, as in the case of a connectionless
+            transport, the value of this attribute shall be a
+            zero-length string."
+        DEFVAL { "" }
+        ::= { applOpenConnectionEntry 4 }
+
+applOpenConnectionFarEndpoint OBJECT-TYPE
+        SYNTAX               SnmpAdminString
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "The applOpenConnectionFarEndpoint attribute reports
+            the fully-qualified domain name and port information
+            for the far end of this connection.
+
+            The format of this attribute for TCP and UDP-based
+            protocols is the fully-qualified domain name immediately
+            followed by a colon which is immediately followed by
+            the decimal representation of the port number.
+
+            If not known, as in the case of a connectionless
+            transport, the value of this attribute shall be a
+            zero-length string."
+        DEFVAL { "" }
+        ::= { applOpenConnectionEntry 5 }
+
+applOpenConnectionApplication OBJECT-TYPE
+        SYNTAX                SnmpAdminString
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applOpenConnectionApplication attribute identifies
+            the application layer protocol in use.  If not known,
+            the value of this attribute shall be a zero-length
+            string.
+
+            When possible, protocol names should be those used in
+            the 'ASSIGNED NUMBERS' [13].  For example, an SMTP mail
+            server would use 'SMTP'."
+        DEFVAL { "" }
+        ::= { applOpenConnectionEntry 6 }
+
+-- ****************************************************************
+--
+--      applTransactionStreamTable - common
+--      information for transaction stream monitoring
+--
+-- ****************************************************************
+
+applTransactionStreamTable OBJECT-TYPE
+        SYNTAX             SEQUENCE OF ApplTransactionStreamEntry
+        MAX-ACCESS         not-accessible
+        STATUS             current
+        DESCRIPTION
+           "The applTransactionStreamTable contains common
+            information for transaction statistic accumulation."
+        ::= { applChannelGroup 4 }
+
+applTransactionStreamEntry OBJECT-TYPE
+        SYNTAX             ApplTransactionStreamEntry
+        MAX-ACCESS         not-accessible
+        STATUS             current
+        DESCRIPTION
+           "An applTransactionStreamEntry contains information for
+            a single transaction stream.  A transaction stream
+            can be a network connection, file, or other source
+            of transactions."
+        INDEX           { applElmtOrSvc, applElmtOrSvcId,
+                          applOpenChannelIndex }
+        ::= { applTransactionStreamTable 1 }
+
+ApplTransactionStreamEntry ::= SEQUENCE {
+        applTransactStreamDescr       SnmpAdminString,
+        applTransactStreamUnitOfWork  SnmpAdminString,
+        applTransactStreamInvokes     Counter64,
+        applTransactStreamInvokesLow  Counter32,
+        applTransactStreamInvCumTimes Counter32,
+        applTransactStreamInvRspTimes Counter32,
+        applTransactStreamPerforms    Counter64,
+        applTransactStreamPerformsLow Counter32,
+        applTransactStreamPrfCumTimes Counter32,
+        applTransactStreamPrfRspTimes Counter32 }
+
+applTransactStreamDescr OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "The applTransactStreamDescr attribute provides a
+            human-readable description of this transaction stream.
+
+            If no descriptive information is available, this
+            attribute's value shall be a zero-length string."
+        DEFVAL { "" }
+        ::= { applTransactionStreamEntry 1 }
+
+applTransactStreamUnitOfWork OBJECT-TYPE
+        SYNTAX               SnmpAdminString
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "The applTransactStreamUnitOfWork attribute provides a
+            human-readable definition of what the unit of work is
+            for this transaction stream.
+
+            If no descriptive information is available, this
+            attribute's value shall be a zero-length string."
+        DEFVAL { "" }
+        ::= { applTransactionStreamEntry 2 }
+
+applTransactStreamInvokes OBJECT-TYPE
+        SYNTAX            Counter64
+        UNITS             "transactions"
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+           "Cumulative count of requests / invocations issued.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 3 }
+
+applTransactStreamInvokesLow OBJECT-TYPE
+        SYNTAX               Counter32
+        UNITS                "transactions"
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "This counter corresponds to the low thirty-two
+            bits of applTransactStreamInvokes.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 4 }
+
+applTransactStreamInvCumTimes OBJECT-TYPE
+        SYNTAX                Counter32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applTransactStreamInvCumTimes attribute reports the
+            cumulative sum of the lengths of the intervals measured
+            between the transmission of requests and the receipt of
+            (the first of) the corresponding response(s).
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 5 }
+
+applTransactStreamInvRspTimes OBJECT-TYPE
+        SYNTAX                Counter32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applTransactStreamInvRspTimes attribute reports the
+            cumulative sum of the lengths of the intervals measured
+            between the receipt of the first and last of multiple
+            responses to a request.
+
+            For transaction streams which do not permit multiple
+            responses to a single request, this attribute will be
+            constant.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 6 }
+
+applTransactStreamPerforms OBJECT-TYPE
+        SYNTAX             Counter64
+        UNITS              "transactions"
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+           "Cumulative count of transactions performed.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 7 }
+
+applTransactStreamPerformsLow OBJECT-TYPE
+        SYNTAX                Counter32
+        UNITS                 "transactions"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "This counter reports the low thirty-two bits of
+            applTransactStreamPerforms.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 8 }
+
+applTransactStreamPrfCumTimes OBJECT-TYPE
+        SYNTAX                Counter32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applTransactStreamPrfCumTimes attribute reports the
+            cumulative sum of the interval lengths measured between
+            receipt of requests and the transmission of the
+            corresponding responses.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 9 }
+
+applTransactStreamPrfRspTimes OBJECT-TYPE
+        SYNTAX                Counter32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "For each transaction performed, the elapsed time between
+            when the first response is enqueued and when the last
+            response is enqueued is added to this cumulative sum.
+
+            For single-response protocols, the value of
+            applTransactStreamPrfRspTimes will be constant.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactionStreamEntry 10 }
+
+-- ****************************************************************
+--
+--      applTransactFlowTable
+--
+-- ****************************************************************
+
+applTransactFlowTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF ApplTransactFlowEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "The applTransactFlowTable contains entries, organized by
+            application instance or running application element,
+            direction of flow, and type (request/response) for each
+            open transaction stream.
+
+            The simple model of a transaction used here looks like
+            this:
+
+                invoker  |   Request     | performer
+                         | - - - - - - > |
+                         |               |
+                         |   Response    |
+                         | < - - - - - - |
+                         |               |
+
+            Since in some protocols it is possible for an entity
+            to take on both the invoker and performer roles,
+            information here is accumulated for transmitted and
+            received requests, as well as for transmitted and
+            received responses.  Counts are maintained for both
+            transactions and bytes transferred."
+        ::= { applChannelGroup 5 }
+
+applTransactFlowEntry OBJECT-TYPE
+        SYNTAX        ApplTransactFlowEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "An applTransactFlowEntry reports transaction throughput
+            information for requests or response in a particular
+            direction (transmit / receive) for a transaction stream.
+
+            Entries in this table correspond to those in the
+            applTransactionStreamTable with identical values for the
+            applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex.
+
+            For all counter objects in one of these entries,
+            the corresponding (same value for applElmtOrSvc,
+            applElmtOrSvcId, and applOpenChannelIndex)
+            applOpenChannelOpenTime object serves as a discontinuity
+            indicator.  "
+        INDEX           { applElmtOrSvc,
+                          applElmtOrSvcId,
+                          applOpenChannelIndex,
+                          applTransactFlowDirection,
+                          applTransactFlowReqRsp }
+        ::= { applTransactFlowTable 1 }
+
+ApplTransactFlowEntry ::= SEQUENCE {
+                applTransactFlowDirection INTEGER,
+                applTransactFlowReqRsp    INTEGER,
+                applTransactFlowTrans     Counter64,
+                applTransactFlowTransLow  Counter32,
+                applTransactFlowBytes     Counter64,
+                applTransactFlowBytesLow  Counter32,
+                applTransactFlowTime      DateAndTime }
+
+applTransactFlowDirection OBJECT-TYPE
+        SYNTAX            INTEGER { transmit(1),
+                                    receive(2) }
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+            "The applTransactFlowDirection index serves to identify
+             an entry as containing information pertaining to the
+             transmit (1) or receive (2) flow of a transaction
+             stream."
+        ::= { applTransactFlowEntry 1 }
+
+applTransactFlowReqRsp OBJECT-TYPE
+        SYNTAX         INTEGER { request(1),
+                                 response(2) }
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+           "The value of the applTransactFlowReqRsp index indicates
+            whether this entry contains information on requests
+            (1), or responses (2)."
+        ::= { applTransactFlowEntry 2 }
+
+applTransactFlowTrans OBJECT-TYPE
+        SYNTAX        Counter64
+        UNITS         "transactions"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The applTransactFlowTrans attribute reports the number
+             of request/response transactions (as indicated by
+             the applTransactFlowReqRsp index) received/generated
+             (as indicated by the applTransactFlowDirection index)
+             that this service instance or running application
+             element has processed for this transaction stream.
+
+             Discontinuities in this counter can be detected
+             by monitoring the corresponding instance of
+             applOpenChannelOpenTime."
+        ::= { applTransactFlowEntry 3 }
+
+applTransactFlowTransLow OBJECT-TYPE
+        SYNTAX           Counter32
+        UNITS            "transactions"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+            "This attribute corresponds to the low thirty-two
+             bits of applTransactFlowTrans.
+
+             Discontinuities in this counter can be detected
+             by monitoring the corresponding instance of
+             applOpenChannelOpenTime."
+        ::= { applTransactFlowEntry 4 }
+
+applTransactFlowBytes OBJECT-TYPE
+        SYNTAX        Counter64
+        UNITS         "bytes"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "The applTransactFlowBytes attribute reports the number
+            of request/response (as indicated by the
+            applTransactFlowReqRsp index) bytes received/generated
+            (as indicated by the applTransactFlowDirection index)
+            handled by this application element or service instance
+            on this transaction stream.
+
+            All application layer bytes are included in this count,
+            including any application layer wrappers, headers, or
+            other overhead.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactFlowEntry 5 }
+
+applTransactFlowBytesLow OBJECT-TYPE
+        SYNTAX           Counter32
+        UNITS            "bytes"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two
+            bits of applTransactFlowBytes.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactFlowEntry 6 }
+
+applTransactFlowTime OBJECT-TYPE
+        SYNTAX       DateAndTime
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The applTransactFlowTime attribute records the time of
+            the processing (receipt or transmission as indicated
+            by the applTransactFlowDirection index) by this
+            running application element or service instance of
+            the most recent request/response (as indicated by
+            the applTransactFlowReqRsp index) on this transaction
+            stream.
+
+            If no requests/responses been received/transmitted by
+            this entity over this transaction stream, the value
+            of this attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applTransactFlowEntry 7 }
+
+-- ****************************************************************
+--
+--      applTransactKindTable - transaction statistics broken down
+--      according to the kinds of transactions in each direction
+--      for a transaction stream.
+--
+-- ****************************************************************
+
+applTransactKindTable   OBJECT-TYPE
+        SYNTAX SEQUENCE OF ApplTransactKindEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The applTransactKindTable provides transaction statistics
+            broken down by kinds of transaction.  The definition of
+            the kinds of transactions is specific to the application
+            protocol in use, and may be documented in the form of an
+            applicability statement.  "
+        ::= { applChannelGroup 6 }
+
+applTransactKindEntry OBJECT-TYPE
+        SYNTAX        ApplTransactKindEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "An applTransactKindEntry reports information for a
+            specific service instance or running application
+            element's use of a specific transaction stream in
+            a particular direction in requests or responses
+            (as indicated by the applTransactFlowReqRsp index)
+            broken down by transaction kind, as indicated by the
+            applTransactKind index.
+
+            Discontinuities in any of the counters in an entry can
+            be detected by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        INDEX           { applElmtOrSvc,
+                          applElmtOrSvcId,
+                          applOpenChannelIndex,
+                          applTransactFlowDirection,
+                          applTransactFlowReqRsp,
+                          applTransactKind }
+        ::= { applTransactKindTable 1 }
+
+ApplTransactKindEntry ::= SEQUENCE
+        {
+                applTransactKind                SnmpAdminString,
+                applTransactKindTrans           Counter64,
+                applTransactKindTransLow        Counter32,
+                applTransactKindBytes           Counter64,
+                applTransactKindBytesLow        Counter32,
+                applTransactKindTime            DateAndTime
+        }
+
+applTransactKind   OBJECT-TYPE
+        SYNTAX     SnmpAdminString (SIZE (1 .. 32))
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+           "The applTransactKind index is the human-readable
+            identifier for a particular transaction kind within
+            the context of an application protocol.  The values
+            to be used for a particular protocol may be identified
+            in an applicability statement."
+        ::= { applTransactKindEntry 1 }
+
+applTransactKindTrans OBJECT-TYPE
+        SYNTAX        Counter64
+        UNITS         "transactions"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "The applTransactKindTrans attribute reports the number
+            of request/response (as indicated by the
+            applTransactFlowReqRsp index) transactions
+            received/generated (as indicated by the
+            applTransactFlowDirection index) handled by this
+            application instance or application element on this
+            transaction stream for this transaction kind.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactKindEntry 2 }
+
+applTransactKindTransLow OBJECT-TYPE
+        SYNTAX           Counter32
+        UNITS            "transactions"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "The applTransactKindTransLow attribute reports
+            the low thirty-two bits of applTransactKindTrans.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactKindEntry 3 }
+
+applTransactKindBytes OBJECT-TYPE
+        SYNTAX        Counter64
+        UNITS         "bytes"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "The applTransactKindBytes attribute reports the number
+            of request/response (as indicated by the
+
+            applTransactFlowReqRsp index) bytes received/generated
+            (as indicated by the applTransactFlowDirection index)
+            handled by this application element on this transaction
+            stream for this transaction kind.
+
+            All application layer bytes are included in this count,
+            including any application layer wrappers, headers, or
+            other overhead.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactKindEntry 4 }
+
+applTransactKindBytesLow OBJECT-TYPE
+        SYNTAX           Counter32
+        UNITS            "bytes"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "The applTransactKindBytesLow attribute corresponds
+            to the low thirty-two bits of applTransactKindBytes.
+
+            Discontinuities in this counter can be detected
+            by monitoring the corresponding instance of
+            applOpenChannelOpenTime."
+        ::= { applTransactKindEntry 5 }
+
+applTransactKindTime OBJECT-TYPE
+        SYNTAX       DateAndTime
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The applTransactKindTime attribute records the time of
+            the processing (receipt or transmission as indicated
+            by the applTransactFlowDirection index) by this
+            running application element or service instance of
+            the most recent request/response (as indicated by
+            the applTransactFlowReqRsp index) of this kind of
+            transaction on this transaction stream.
+
+            If no requests/responses of this kind been
+            received/transmitted by this running application element
+            or service instance over this transaction stream, the
+            value of this attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applTransactKindEntry 6 }
+
+-- ****************************************************************
+--
+--      applPastChannelGroup - logged information on former channels.
+--      These tables control the collection of channel history
+--      information and represent the accumulated historical data.
+--
+-- ****************************************************************
+
+applPastChannelControlTable OBJECT-TYPE
+        SYNTAX           SEQUENCE OF ApplPastChannelControlEntry
+        MAX-ACCESS       not-accessible
+        STATUS           current
+        DESCRIPTION
+           "The applPastChannelControlTable controls the
+            accumulation of history information about channels
+            from the perspective of service instances and running
+            application elements.  Entries in this table are indexed
+            by applElmtOrSvc and applElmtOrSvcId, giving control
+            of channel history accumulation at the level of each
+            service instance and running application element."
+        ::= { applPastChannelGroup 1 }
+
+applPastChannelControlEntry OBJECT-TYPE
+        SYNTAX           ApplPastChannelControlEntry
+        MAX-ACCESS       not-accessible
+        STATUS           current
+        DESCRIPTION
+           "An applPastChannelControlEntry provides the ability
+            to control the retention of channel history information
+            by service instances and running application elements."
+        INDEX           { applElmtOrSvc, applElmtOrSvcId }
+        ::= { applPastChannelControlTable 1 }
+
+ApplPastChannelControlEntry  ::= SEQUENCE
+        {
+                applPastChannelControlCollect   INTEGER,
+                applPastChannelControlMaxRows   Unsigned32,
+                applPastChannelControlTimeLimit Unsigned32,
+                applPastChannelControlRemItems  Counter32
+        }
+
+applPastChannelControlCollect OBJECT-TYPE
+        SYNTAX             INTEGER { enabled (1),
+                                     frozen (2),
+                                     disabled (3) }
+        MAX-ACCESS         read-write
+        STATUS             current
+        DESCRIPTION
+           "When the value of applPastChannelControlCollect is
+            'enabled', each time the corresponding running
+            application element or service instance closes
+            an open channel a new entry will be added to the
+            applPastChannelTable.
+
+            When the value of applPastChannelControlCollect
+            is 'frozen', no new entries are added to the
+            applPastChannelTable for this running application
+            element or service instance, and old entries are not
+            aged out.
+
+            When the value of applPastChannelControlCollect
+            is 'disabled', all entries are removed from
+            applPastChannelTable for this running application or
+            service instance, and no new entries are added."
+        DEFVAL { enabled }
+        ::= { applPastChannelControlEntry 1 }
+
+applPastChannelControlMaxRows OBJECT-TYPE
+        SYNTAX             Unsigned32
+        UNITS              "channel history entries"
+        MAX-ACCESS         read-write
+        STATUS             current
+        DESCRIPTION
+           "The maximum number of entries allowed in the
+            applPastChannelTable for this running application element
+            or service instance.  Once the number of rows for this
+            running application element or service instance in the
+            applPastChannelTable reaches this value, when new
+            entries are to be added the management subsystem will
+            make room for them by removing the oldest entries.
+            Entries will be removed on the basis of oldest
+            applPastChannelCloseTime value first."
+        DEFVAL          { 500 }
+        ::= { applPastChannelControlEntry 2 }
+
+applPastChannelControlTimeLimit OBJECT-TYPE
+        SYNTAX               Unsigned32
+        UNITS                "seconds"
+        MAX-ACCESS           read-write
+        STATUS               current
+        DESCRIPTION
+           "The maximum time in seconds which an entry for this
+            running application element or service instance
+            may exist in the applPastChannelTable before it
+            is removed.  Any entry that is older than this value
+            will be removed (aged out) from the table, unless the
+
+            applPastChannelControlCollect is set to 'frozen'.
+
+            Note that an entry may be aged out prior to reaching
+            this time limit if it is the oldest entry in the table
+            and must be removed to make space for a new entry so
+            as to not exceed applPastChannelControlMaxRows, or if the
+            applPastChannelControlCollect is set to 'disabled'."
+        DEFVAL          { 7200 }
+        ::= { applPastChannelControlEntry 3 }
+
+applPastChannelControlRemItems OBJECT-TYPE
+        SYNTAX              Counter32
+        UNITS               "channel history entries"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "The applPastChannelControlRemItems attribute reports the
+            number of applPastChannelControlTable entries for this
+            running application element or service instance that
+            were deleted in order to make room for new history
+            entries.
+
+            This count does NOT include entries deleted for the
+            following reasons:
+                - the corresponding applPastChannelControlCollect
+                  attribute has been set to 'disabled'
+
+                - the entry has been in the table longer that the
+                  time limit indicated by the corresponding
+                  applPastChannelControlTimeLimit.
+          "
+        ::= { applPastChannelControlEntry 4 }
+
+-- ****************************************************************
+--
+--      applPastChannelTable - Table of former channels
+--
+-- ****************************************************************
+
+applPastChannelTable   OBJECT-TYPE
+        SYNTAX         SEQUENCE OF ApplPastChannelEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "The applPastChannelTable provides history information
+            about channels from the perspective of running
+            application elements and service instances.
+
+            Entries in this table are indexed by applElmtOrSvc,
+            applElmtOrSvcId, and by applPastChannelIndex, which
+            serves to uniquely identify each former channel in the
+            context of a running application element or service
+            instance.
+
+            Note that the value of applPastChannelIndex is
+            independent of the value applOpenChannelIndex had when
+            this channel was open.
+
+            Entries for closed channels for a given running
+            application element or service instance can
+            be added to this table only if its entry in the
+            applPastChannelControlTable has the value 'enabled'
+            for the attribute applPastChannelControlCollect.
+
+            Entries for closed channels are removed under the
+            following circumstances:
+
+                - the running application element or service
+                  instance no longer exists
+
+                - the corresponding applPastChannelControlCollect
+                  attribute has been set to 'disabled'
+
+                - the entry has been in the table longer that the
+                  time limit indicated by the corresponding
+                  applPastChannelControlTimeLimit and the value of
+                  applPastChannelControlCollect is not 'frozen'
+
+                - this is the oldest entry for the running
+                  application element or service instance in
+                  question and the addition of a new element would
+                  otherwise cause applPastChannelControlMaxRows to
+                  be exceeded for this running application element
+                  or service instance.
+
+                - a value of applPastChannelIndex has been re-used.
+                  Note that under normal circumstances, this is
+                  unlikely.
+
+            Removal/replacement of an entry under the
+            last two conditions causes the corresponding
+            applPastChannelControlRemItems to be incremented."
+        ::= { applPastChannelGroup 2 }
+
+applPastChannelEntry   OBJECT-TYPE
+        SYNTAX         ApplPastChannelEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+          "An applPastChannelEntry indicates that a running
+           application element or service instance once had an open
+           channel, which is now closed.  The entry has information
+           describing that channel."
+        INDEX       { applElmtOrSvc, applElmtOrSvcId,
+                      applPastChannelIndex }
+        ::= { applPastChannelTable 1 }
+
+ApplPastChannelEntry  ::= SEQUENCE
+        {
+                applPastChannelIndex           Unsigned32,
+                applPastChannelOpenTime        DateAndTime,
+                applPastChannelCloseTime       DateAndTime,
+                applPastChannelReadRequests    Unsigned64TC,
+                applPastChannelReadReqsLow     Unsigned32,
+                applPastChannelReadFailures    Unsigned32,
+                applPastChannelBytesRead       Unsigned64TC,
+                applPastChannelBytesReadLow    Unsigned32,
+                applPastChannelLastReadTime    DateAndTime,
+                applPastChannelWriteRequests   Unsigned64TC,
+                applPastChannelWriteReqsLow    Unsigned32,
+                applPastChannelWriteFailures   Unsigned32,
+                applPastChannelBytesWritten    Unsigned64TC,
+                applPastChannelBytesWritLow    Unsigned32,
+                applPastChannelLastWriteTime   DateAndTime
+        }
+
+applPastChannelIndex      OBJECT-TYPE
+        SYNTAX            Unsigned32 (1..'ffffffff'h)
+        MAX-ACCESS        not-accessible
+        STATUS            current
+        DESCRIPTION
+           "This attribute serves to uniquely identify this closed
+            channel in the context of the running application
+            element or service instance.  This attribute has no
+            other semantics.
+
+            Note that the value of applPastChannelIndex is
+            independent of the value applOpenChannelIndex had when
+            this channel was active.
+
+            In issuing this index value, the implementation must
+            avoid re-issuing an index value which has already been
+
+            assigned to an entry which has not yet been deleted due
+            to age or space considerations.
+
+            The value zero is excluded from the set of permitted
+            values for this index in order to permit other tables to
+            possibly represent information that cannot be associated
+            with a specific entry in this table.  "
+        ::= { applPastChannelEntry 1 }
+
+applPastChannelOpenTime OBJECT-TYPE
+        SYNTAX          DateAndTime
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This attribute records the time when this channel was
+            originally opened.  Note that this information is quite
+            different from applOpenChannelOpenTime, which is used
+            for the detection of counter discontinuities."
+        ::= { applPastChannelEntry 2 }
+
+applPastChannelCloseTime OBJECT-TYPE
+        SYNTAX           DateAndTime
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "This attribute records the time when this channel
+            was closed."
+        ::= { applPastChannelEntry 3 }
+
+applPastChannelReadRequests OBJECT-TYPE
+        SYNTAX              Unsigned64TC
+        UNITS               "read requests"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute records the number of read requests for
+            this channel made by this running application element or
+            service instance.  All read requests for this channel by
+            this running application element or service instance,
+            regardless of completion status, are included in this
+            count.  Read requests are counted in terms of system
+            calls, rather than API calls."
+        ::= { applPastChannelEntry 4 }
+
+applPastChannelReadReqsLow OBJECT-TYPE
+        SYNTAX             Unsigned32
+        UNITS              "read requests"
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two bits
+            of applPastChannelReadRequests."
+        ::= { applPastChannelEntry 5 }
+
+applPastChannelReadFailures OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "failed read requests"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the number of failed read
+            requests."
+        ::= { applPastChannelEntry 6 }
+
+applPastChannelBytesRead OBJECT-TYPE
+        SYNTAX           Unsigned64TC
+        UNITS            "bytes"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "This attribute reports the number of bytes read from this
+            channel by this running application element or service
+            instance.  Only bytes successfully read are included in
+            this count. "
+        ::= { applPastChannelEntry 7 }
+
+applPastChannelBytesReadLow OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "bytes"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two bits
+            of applPastChannelBytesRead."
+        ::= { applPastChannelEntry 8 }
+
+applPastChannelLastReadTime OBJECT-TYPE
+        SYNTAX              DateAndTime
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the time of the most recent read
+            request made by this running application element or
+            service instance regardless of completion status, for
+            this former channel.
+
+            If no read requests have been made , the value of this
+            attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applPastChannelEntry 9 }
+
+applPastChannelWriteRequests OBJECT-TYPE
+        SYNTAX               Unsigned64TC
+        UNITS                "write requests"
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "The applPastChannelWriteRequests attribute reports
+            the number of write requests, regardless of completion
+            status, made by this running application element or
+            service instance for this former channel.
+
+            Write requests are counted in terms of system calls,
+            rather than API calls."
+        ::= { applPastChannelEntry 10 }
+
+applPastChannelWriteReqsLow OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "write requests"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two
+            bits of applPastChannelWriteRequests."
+        ::= { applPastChannelEntry 11 }
+
+applPastChannelWriteFailures OBJECT-TYPE
+        SYNTAX               Unsigned32
+        UNITS                "failed write requests"
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "This attribute reports the number of failed write
+            requests."
+        ::= { applPastChannelEntry 12 }
+
+applPastChannelBytesWritten OBJECT-TYPE
+        SYNTAX              Unsigned64TC
+        UNITS               "bytes"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute reports the number of bytes written to
+            this former channel by this running application element
+            or service instance.  Only bytes successfully written
+            (no errors reported by the API in use by the application)
+            are included in this count."
+        ::= { applPastChannelEntry 13 }
+
+applPastChannelBytesWritLow OBJECT-TYPE
+        SYNTAX              Unsigned32
+        UNITS               "bytes"
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two bits of
+            applPastChannelBytesWritten."
+        ::= { applPastChannelEntry 14 }
+
+applPastChannelLastWriteTime OBJECT-TYPE
+        SYNTAX               DateAndTime
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "The applPastChannelLastWriteTime attribute reports
+            the time of the most recent write request made by
+            this running application element or service instance,
+            regardless of completion status, for this former
+            channel.
+
+            If no write requests have been made the value of this
+            attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applPastChannelEntry 15 }
+
+-- ****************************************************************
+--
+--      applPastFileTable - information specific to former files
+--
+-- ****************************************************************
+
+applPastFileTable  OBJECT-TYPE
+        SYNTAX     SEQUENCE OF ApplPastFileEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+           "The applPastFileTable supplements the
+            applPastChannelTable for entries corresponding to
+            channels which were files.  The indexing structure is
+            identical to applPastChannelTable.  An entry exists in
+            the applPastFileTable only if there is a corresponding
+            (same index values) entry in the applPastChannelTable
+            and if the channel was a file.
+
+            Entries for closed files are removed when the
+            corresponding entries are removed from the
+            applPastChannelTable."
+        ::= { applPastChannelGroup 3 }
+
+applPastFileEntry   OBJECT-TYPE
+        SYNTAX      ApplPastFileEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+          "An applPastFileEntry provides additional, file-specific
+           information to complement the corresponding
+           applPastChannelEntry for a channel which was a file."
+        INDEX       { applElmtOrSvc, applElmtOrSvcId,
+                      applPastChannelIndex }
+        ::= { applPastFileTable 1 }
+
+ApplPastFileEntry ::= SEQUENCE
+        {
+                applPastFileName                LongUtf8String,
+                applPastFileSizeHigh            Unsigned32,
+                applPastFileSizeLow             Unsigned32,
+                applPastFileMode                INTEGER
+        }
+
+applPastFileName   OBJECT-TYPE
+        SYNTAX     LongUtf8String
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+          "This attribute records the last known value of
+           applOpenFileName before the channel was closed."
+        ::= { applPastFileEntry 1 }
+
+applPastFileSizeHigh OBJECT-TYPE
+        SYNTAX       Unsigned32
+        UNITS        "2^32 byte blocks"
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+          "This attribute records the value of applOpenFileSizeHigh
+           at the time this channel was closed.
+
+           For example, for a file with a total size of
+           4,294,967,296 bytes, this attribute would have a value
+           of 1; for a file with a total size of 4,294,967,295
+           bytes this attribute's value would be 0."
+        ::= { applPastFileEntry 2 }
+
+applPastFileSizeLow OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "bytes"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "This attribute records the value of applOpenFileSizeLow
+            at the time this channel was closed.
+
+            For example, for a file with a total size of
+            4,294,967,296 bytes this attribute would have a value
+            of 0; for a file with a total size of 4,294,967,295
+            bytes this attribute's value would be 4,294,967,295."
+        ::= { applPastFileEntry 3 }
+
+applPastFileMode   OBJECT-TYPE
+        SYNTAX     INTEGER { read(1),
+                             write(2),
+                             readWrite(3) }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+           "This attribute records the value of applOpenFileMode
+            at the time this channel was closed.  "
+        ::= { applPastFileEntry 4 }
+
+-- ****************************************************************
+--
+--      applPastConTable - information specific to former connections
+--
+-- ****************************************************************
+
+applPastConTable OBJECT-TYPE
+        SYNTAX    SEQUENCE OF ApplPastConEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+           "The applPastConTable supplements the applPastChannelTable
+            for entries corresponding to channels which were
+            connections.  The indexing structure is identical
+            to applPastChannelTable.  An entry exists in the
+            applPastConTable only if there is a corresponding
+            (same index values) entry in the applPastChannelTable
+            and if the channel was a connection.
+
+            Entries for closed connections are removed when
+            the corresponding entries are removed from the
+            applPastChannelTable."
+        ::= { applPastChannelGroup 4 }
+
+applPastConEntry   OBJECT-TYPE
+        SYNTAX      ApplPastConEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+          "An applPastConEntry provides additional,
+           connection-specific information to complement the
+           corresponding applPastChannelEntry for a channel which
+           was a connection."
+        INDEX       { applElmtOrSvc, applElmtOrSvcId,
+                      applPastChannelIndex }
+        ::= { applPastConTable 1 }
+
+ApplPastConEntry ::= SEQUENCE
+        {
+                applPastConTransport       TDomain,
+                applPastConNearEndAddr     ApplTAddress,
+                applPastConNearEndpoint    SnmpAdminString,
+                applPastConFarEndAddr      ApplTAddress,
+                applPastConFarEndpoint     SnmpAdminString,
+                applPastConApplication     SnmpAdminString
+        }
+
+applPastConTransport OBJECT-TYPE
+        SYNTAX       TDomain
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The applPastConTransport attribute identifies the
+            transport protocol that was in use for this former
+            connection.  If the transport protocol could not be
+            determined, the value { 0 0 } shall be used."
+        DEFVAL { zeroDotZero }
+        ::= { applPastConEntry 1 }
+
+applPastConNearEndAddr OBJECT-TYPE
+        SYNTAX         ApplTAddress
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+           "The applPastConNearEndAddr attribute reports the
+            transport address and port information for the near
+            end of this former connection.
+
+            If the information could not be determined, the value
+            shall be a zero-length string."
+        DEFVAL { "" }
+        ::= { applPastConEntry 2 }
+
+applPastConNearEndpoint OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "The applPastConNearEndpoint attribute reports the
+            fully-qualified domain name and port information for the
+            near end of this former connection.
+
+            The format of this attribute for TCP and UDP-based
+            protocols is the fully-qualified domain name immediately
+            followed by a colon which is immediately followed by
+            the decimal representation of the port number.
+
+            If the information could not be determined, the value
+            shall be a zero-length string."
+        DEFVAL { "" }
+        ::= { applPastConEntry 3 }
+
+applPastConFarEndAddr OBJECT-TYPE
+        SYNTAX        ApplTAddress
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "The applPastConFarEnd attribute reports the transport
+            address and port information for the far end of this
+
+            former connection.
+
+            If not known, as in the case of a connectionless
+            transport, the value of this attribute shall be a
+            zero-length string."
+        DEFVAL { "" }
+        ::= { applPastConEntry 4 }
+
+applPastConFarEndpoint OBJECT-TYPE
+        SYNTAX        SnmpAdminString
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "The applPastConFarEndpoint attribute reports the
+            transport address and port information for the far
+            end of this former connection.
+
+            The format of this attribute for TCP and UDP-based
+            protocols is the fully-qualified domain name immediately
+            followed by a colon which is immediately followed by
+            the decimal representation of the port number.
+
+            If not known, as in the case of a connectionless
+            transport, the value of this attribute shall be a
+            zero-length string."
+        DEFVAL { "" }
+        ::= { applPastConEntry 5 }
+
+applPastConApplication OBJECT-TYPE
+        SYNTAX         SnmpAdminString
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+           "The applPastConApplication attribute identifies the
+            application layer protocol that was in use.  Where
+            possible, the values defined in [13] shall be used.
+            If not known, the value of this attribute shall be a
+            zero-length string."
+        DEFVAL { "" }
+        ::= { applPastConEntry 6 }
+
+-- ****************************************************************
+--
+--      applPastTransStreamTable - historical
+--      information for transaction stream monitoring
+--
+-- ****************************************************************
+
+applPastTransStreamTable OBJECT-TYPE
+        SYNTAX             SEQUENCE OF ApplPastTransStreamEntry
+        MAX-ACCESS         not-accessible
+        STATUS             current
+        DESCRIPTION
+           "The applPastTransStreamTable contains common
+            information for historical transaction statistics."
+        ::= { applPastChannelGroup 5 }
+
+applPastTransStreamEntry OBJECT-TYPE
+        SYNTAX             ApplPastTransStreamEntry
+        MAX-ACCESS         not-accessible
+        STATUS             current
+        DESCRIPTION
+           "An applPastTransStreamEntry contains information for
+            a single former transaction stream.  A transaction
+            stream could have been a network connection, file, or
+            other source of transactions."
+        INDEX           { applElmtOrSvc, applElmtOrSvcId,
+                          applPastChannelIndex }
+        ::= { applPastTransStreamTable 1 }
+
+ApplPastTransStreamEntry ::= SEQUENCE {
+        applPastTransStreamDescr        SnmpAdminString,
+        applPastTransStreamUnitOfWork   SnmpAdminString,
+        applPastTransStreamInvokes      Unsigned64TC,
+        applPastTransStreamInvokesLow   Unsigned32,
+        applPastTransStreamInvCumTimes  Unsigned32,
+        applPastTransStreamInvRspTimes  Unsigned32,
+        applPastTransStreamPerforms     Unsigned64TC,
+        applPastTransStreamPerformsLow  Unsigned32,
+        applPastTransStreamPrfCumTimes  Unsigned32,
+        applPastTransStreamPrfRspTimes  Unsigned32 }
+applPastTransStreamDescr OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "The applPastTransStreamDescr attribute provides a
+            human-readable description of this transaction stream.
+
+            If no descriptive information is available, this
+            attribute's value shall be a zero-length string."
+        DEFVAL { "" }
+        ::= { applPastTransStreamEntry 1 }
+
+applPastTransStreamUnitOfWork OBJECT-TYPE
+        SYNTAX               SnmpAdminString
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "The applPastTransStreamUnitOfWork attribute provides a
+            human-readable definition of what the unit of work is
+            for this transaction stream.
+
+            If no descriptive information is available, this
+            attribute's value shall be a zero-length string."
+        DEFVAL { "" }
+        ::= { applPastTransStreamEntry 2 }
+
+applPastTransStreamInvokes OBJECT-TYPE
+        SYNTAX            Unsigned64TC
+        UNITS             "transactions"
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+           "Cumulative count of requests / invocations issued
+            for this transaction stream when it was active."
+        ::= { applPastTransStreamEntry 3 }
+
+applPastTransStreamInvokesLow OBJECT-TYPE
+        SYNTAX               Unsigned32
+        UNITS                "transactions"
+        MAX-ACCESS           read-only
+        STATUS               current
+        DESCRIPTION
+           "This object corresponds to the low thirty-two
+            bits of applPastTransStreamInvokes."
+        ::= { applPastTransStreamEntry 4 }
+
+applPastTransStreamInvCumTimes OBJECT-TYPE
+        SYNTAX                Unsigned32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applPastTransStreamInvCumTimes attribute reports the
+            cumulative sum of the lengths of the intervals times
+            measured between the transmission of requests and the
+            receipt of (the first of) the corresponding response(s)."
+        ::= { applPastTransStreamEntry 5 }
+
+applPastTransStreamInvRspTimes OBJECT-TYPE
+        SYNTAX                Unsigned32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applPastTransStreamInvRspTimes attribute reports the
+            cumulative sum of the lengths of the intervals measured
+            between the receipt of the first and last of multiple
+            responses to a request.
+
+            For transaction streams which do not permit multiple
+            responses to a single request, this attribute will be
+            zero."
+        ::= { applPastTransStreamEntry 6 }
+
+applPastTransStreamPerforms OBJECT-TYPE
+        SYNTAX             Unsigned64TC
+        UNITS              "transactions"
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+           "Total number of transactions performed."
+        ::= { applPastTransStreamEntry 7 }
+
+applPastTransStreamPerformsLow OBJECT-TYPE
+        SYNTAX                Unsigned32
+        UNITS                 "transactions"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "This objecy reports the low thirty-two bits of
+            applPastTransStreamPerforms."
+        ::= { applPastTransStreamEntry 8 }
+
+applPastTransStreamPrfCumTimes OBJECT-TYPE
+        SYNTAX                Unsigned32
+        UNITS                 "milliseconds"
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applPastTransStreamPrfCumTimes attribute reports the
+            cumulative sum of the lengths of the intervals measured
+            between receipt of requests and the transmission of the
+            corresponding responses."
+        ::= { applPastTransStreamEntry 9 }
+
+applPastTransStreamPrfRspTimes OBJECT-TYPE
+        SYNTAX                 Unsigned32
+        UNITS                  "milliseconds"
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+           "For each transaction performed, the elapsed time between
+            when the first response is enqueued and when the last
+            response is enqueued is added to this cumulative sum.
+
+            For single-response protocols, the value of
+            applPastTransStreamPrfRspTimes will be zero."
+        ::= { applPastTransStreamEntry 10 }
+
+-- ****************************************************************
+--
+--      applPastTransFlowTable
+--
+-- ****************************************************************
+
+applPastTransFlowTable OBJECT-TYPE
+        SYNTAX        SEQUENCE OF ApplPastTransFlowEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "The applPastTransFlowTable contains entries, organized by
+            application instance or running application element,
+            direction of flow, and type (request/response) for each
+            former transaction stream.
+
+            The simple model of a transaction used here looks like
+            this:
+
+                invoker  |   Request     | performer
+                         | - - - - - - > |
+                         |               |
+                         |   Response    |
+                         | < - - - - - - |
+                         |               |
+
+            Since in some protocols it is possible for an entity
+            to take on both the invoker and performer roles,
+            information here is accumulated for transmitted and
+            received requests, as well as for transmitted and
+            received responses.  Counts are maintained for both
+            transactions and bytes transferred."
+        ::= { applPastChannelGroup 6 }
+
+applPastTransFlowEntry OBJECT-TYPE
+        SYNTAX        ApplPastTransFlowEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "An applPastTransFlowEntry records transaction throughput
+            information for requests or response in a particular
+            direction (transmit / receive) for a transaction stream.
+
+            Entries in this table correspond to those in the
+            applPastTransStreamTable with identical values
+            for the applElmtOrSvc, applElmtOrSvcId, and the
+            applPastChannelIndex."
+        INDEX           { applElmtOrSvc,
+                          applElmtOrSvcId,
+                          applPastChannelIndex,
+                          applPastTransFlowDirection,
+                          applPastTransFlowReqRsp }
+        ::= { applPastTransFlowTable 1 }
+
+ApplPastTransFlowEntry ::= SEQUENCE {
+                applPastTransFlowDirection INTEGER,
+                applPastTransFlowReqRsp    INTEGER,
+                applPastTransFlowTrans     Unsigned64TC,
+                applPastTransFlowTransLow  Unsigned32,
+                applPastTransFlowBytes     Unsigned64TC,
+                applPastTransFlowBytesLow  Unsigned32,
+                applPastTransFlowTime      DateAndTime }
+
+applPastTransFlowDirection OBJECT-TYPE
+        SYNTAX             INTEGER { transmit(1),
+                                     receive(2) }
+        MAX-ACCESS         not-accessible
+        STATUS             current
+        DESCRIPTION
+            "The applPastTransFlowDirection index serves
+             to identify an entry as containing information
+             pertaining to the transmit (1) or receive (2) flow
+             of a past transaction stream.  This index corresponds
+             to applTransactFlowDirection."
+        ::= { applPastTransFlowEntry 1 }
+
+applPastTransFlowReqRsp OBJECT-TYPE
+        SYNTAX          INTEGER { request(1),
+                                  response(2) }
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The value of the applPastTransFlowReqRsp index indicates
+            whether this entry contains information on requests
+            (1), or responses (2).  This index corresponds to
+            applTransactFlowReqRsp."
+        ::= { applPastTransFlowEntry 2 }
+
+applPastTransFlowTrans OBJECT-TYPE
+        SYNTAX        Unsigned64TC
+        UNITS         "transactions"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+            "The applPastTransFlowTrans attribute reports the number
+             of request/response (as indicated by the
+             applPastTransFlowReqRsp index) transactions
+             received/generated (as indicated by the
+             applPastTransFlowDirection index) handled on this
+             transaction stream."
+        ::= { applPastTransFlowEntry 3 }
+
+applPastTransFlowTransLow OBJECT-TYPE
+        SYNTAX           Unsigned32
+        UNITS            "transactions"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+            "This attribute corresponds to the low thirty-two
+             bits of applPastTransFlowTrans."
+        ::= { applPastTransFlowEntry 4 }
+
+applPastTransFlowBytes OBJECT-TYPE
+        SYNTAX        Unsigned64TC
+        UNITS         "bytes"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "The applPastTransFlowBytes attribute reports the number
+            of request/response (as indicated by the
+            applPastTransFlowReqRsp index) bytes received/generated
+            (as indicated by the applPastTransFlowDirection index)
+            handled on this transaction stream.
+
+            All application layer bytes are included in this count,
+            including any application layer wrappers, headers, or
+            other overhead."
+        ::= { applPastTransFlowEntry 5 }
+
+applPastTransFlowBytesLow OBJECT-TYPE
+        SYNTAX           Unsigned32
+        UNITS            "bytes"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "This attribute corresponds to the low thirty-two
+            bits of applPastTransFlowBytes."
+        ::= { applPastTransFlowEntry 6 }
+
+applPastTransFlowTime OBJECT-TYPE
+        SYNTAX       DateAndTime
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The applPastTransFlowTime attribute records the time of
+            the processing (receipt or transmission as
+            indicated by the applPastTransFlowDirection index)
+            of the last request/response (as indicated by the
+            applPastTransFlowReqRsp index) on this transaction
+            stream.
+
+            If no requests/responses been received/transmitted by
+            this entity over this transaction stream, the value
+            of this attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applPastTransFlowEntry 7 }
+
+-- ****************************************************************
+--
+--      applPastTransKindTable - transaction statistics broken down
+--      according to the kinds of transactions in each direction
+--      for a transaction stream.
+--
+-- ****************************************************************
+
+applPastTransKindTable   OBJECT-TYPE
+        SYNTAX SEQUENCE OF ApplPastTransKindEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The applPastTransKindTable provides transaction
+            statistics broken down by kinds of transaction.
+            The definition of the kinds of transactions is
+            specific to the application protocol in use, and may be
+            documented in the form of an applicability statement.  "
+        ::= { applPastChannelGroup 7 }
+
+applPastTransKindEntry OBJECT-TYPE
+        SYNTAX        ApplPastTransKindEntry
+        MAX-ACCESS    not-accessible
+        STATUS        current
+        DESCRIPTION
+           "An applPastTransKindEntry reports historical data for a
+            specific service instance or running application
+            element's use of a specific transaction stream in
+            a particular direction in requests or responses
+            (as indicated by the applPastTransFlowReqRsp index)
+            broken down by transaction kind, as indicated by the
+            applPastTransKind index."
+        INDEX           { applElmtOrSvc,
+                          applElmtOrSvcId,
+                          applPastChannelIndex,
+                          applPastTransFlowDirection,
+                          applPastTransFlowReqRsp,
+                          applPastTransKind }
+        ::= { applPastTransKindTable 1 }
+
+ApplPastTransKindEntry ::= SEQUENCE
+        {
+                applPastTransKind                SnmpAdminString,
+                applPastTransKindTrans           Unsigned64TC,
+                applPastTransKindTransLow        Unsigned32,
+                applPastTransKindBytes           Unsigned64TC,
+                applPastTransKindBytesLow        Unsigned32,
+                applPastTransKindTime            DateAndTime
+        }
+
+applPastTransKind   OBJECT-TYPE
+        SYNTAX      SnmpAdminString (SIZE (1 .. 32))
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The applPastTransKind index is the human-readable
+            identifier for a particular transaction kind within
+            the context of an application protocol.  The values
+            to be used for a particular protocol may be identified
+            in an applicability statement.  This index corresponds
+            to applTransactKind."
+        ::= { applPastTransKindEntry 1 }
+
+applPastTransKindTrans OBJECT-TYPE
+        SYNTAX        Unsigned64TC
+        UNITS         "transactions"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "For this transaction stream, this attribute records
+            the total number of transactions of the type
+            identified by the indexes.  The type is characterized
+            according to the receive/transmit direction
+            (applPastTransFlowDirecton), whether it was a request
+            or a response (applPastTransFlowReqRsp), and the
+            protocol-specific transaction kind (applPastTransKind).
+            stream for this transaction kind."
+        ::= { applPastTransKindEntry 2 }
+
+applPastTransKindTransLow OBJECT-TYPE
+        SYNTAX           Unsigned32
+        UNITS            "transactions"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "The applPastTransKindTransLow attribute reports
+            the low thirty-two bits of applPastTransKindTrans."
+        ::= { applPastTransKindEntry 3 }
+
+applPastTransKindBytes OBJECT-TYPE
+        SYNTAX        Unsigned64TC
+        UNITS         "bytes"
+        MAX-ACCESS    read-only
+        STATUS        current
+        DESCRIPTION
+           "For this transaction stream and transaction kind, the
+            applPastTransKindBytes attribute reports the number
+            of bytes received or generated (as indicated by
+            the applPastTransFlowDirection index) in requests or
+            responses (as indicated by the applPastTransFlowReqRsp
+            index).
+
+            All application layer bytes are included in this count,
+            including any application layer wrappers, headers, or
+            other overhead."
+        ::= { applPastTransKindEntry 4 }
+
+applPastTransKindBytesLow OBJECT-TYPE
+        SYNTAX           Unsigned32
+        UNITS            "bytes"
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+           "The applPastTransKindBytesLow attribute corresponds
+            to the low thirty-two bits of applPastTransKindBytes."
+        ::= { applPastTransKindEntry 5 }
+
+applPastTransKindTime OBJECT-TYPE
+        SYNTAX       DateAndTime
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The applPastTransKindTime attribute records the time of
+            the processing (receipt or transmission as
+            indicated by the applPastTransFlowDirection index)
+            of the last request/response (as indicated by the
+            applPastTransFlowReqRsp index) of this kind of
+            transaction on this transaction stream.
+
+            If no requests/responses of this kind were
+            received/transmitted over this transaction stream, the
+            value of this attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applPastTransKindEntry 6 }
+
+-- ****************************************************************
+--
+--      applElmtRunControlGroup - monitor and control running
+--      application elements
+--
+-- ****************************************************************
+
+applElmtRunStatusTable OBJECT-TYPE
+        SYNTAX         SEQUENCE OF ApplElmtRunStatusEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+           "This table provides information on running application
+            elements, complementing information available in the
+            correspondingly indexed sysApplElmtRunTable [31]."
+        ::= { applElmtRunControlGroup 1 }
+
+applElmtRunStatusEntry OBJECT-TYPE
+        SYNTAX         ApplElmtRunStatusEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+          "An applElmtRunStatusEntry contains information to support
+           the control and monitoring of a single running application
+           element."
+        INDEX { sysApplElmtRunIndex }
+        ::= { applElmtRunStatusTable 1 }
+
+ApplElmtRunStatusEntry ::= SEQUENCE {
+        applElmtRunStatusSuspended              TruthValue,
+        applElmtRunStatusHeapUsage              Unsigned32,
+        applElmtRunStatusOpenConnections        Unsigned32,
+        applElmtRunStatusOpenFiles              Gauge32,
+        applElmtRunStatusLastErrorMsg           SnmpAdminString,
+        applElmtRunStatusLastErrorTime          DateAndTime }
+
+applElmtRunStatusSuspended OBJECT-TYPE
+        SYNTAX             TruthValue
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+           "The applElmtRunStatusSuspended attribute reports
+            whether processing by this running application element
+            has been suspended, whether by management request or by
+            other means."
+        ::= { applElmtRunStatusEntry 1 }
+
+applElmtRunStatusHeapUsage OBJECT-TYPE
+        SYNTAX             Unsigned32
+        UNITS              "bytes"
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+           "The applElmtRunStatusHeapUsage reports the current
+            approximate heap usage by this running application
+            element."
+        ::= { applElmtRunStatusEntry 2 }
+
+applElmtRunStatusOpenConnections OBJECT-TYPE
+        SYNTAX                   Unsigned32
+        UNITS                    "connections"
+        MAX-ACCESS               read-only
+        STATUS                   current
+        DESCRIPTION
+           "The applElmtRunStatusOpenConnections attribute reports
+            the current number of open connections in use by this
+            running application element."
+        ::= { applElmtRunStatusEntry 3 }
+
+applElmtRunStatusOpenFiles OBJECT-TYPE
+        SYNTAX             Gauge32
+        UNITS              "files"
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+           "The applElmtRunStatusOpenFiles attribute reports the
+
+            current number of open files in use by this running
+            application element."
+        ::= { applElmtRunStatusEntry 4 }
+
+applElmtRunStatusLastErrorMsg OBJECT-TYPE
+        SYNTAX                SnmpAdminString
+        MAX-ACCESS            read-only
+        STATUS                current
+        DESCRIPTION
+           "The applElmtRunStatusLastErrorMessage attribute reports
+            the most recent error message (typically written to
+            stderr or a system error logging facility) from this
+            running application element.  If no such message has yet
+            been generated, the value of this attribute shall be a
+            zero-length string."
+        DEFVAL { "" }
+        ::= { applElmtRunStatusEntry 5 }
+
+applElmtRunStatusLastErrorTime OBJECT-TYPE
+        SYNTAX                 DateAndTime
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+           "The applElmtRunStatusLastErrorTime attribute reports the
+            time of the most recent error message in
+            applElmtRunStatusLastErrorMsg.
+
+            If no such message has yet been generated, the value
+            of this attribute shall be '0000000000000000'H "
+        DEFVAL { '0000000000000000'H }
+        ::= { applElmtRunStatusEntry 6 }
+
+-- ****************************************************************
+--
+--      applElmtRunControlTable - control running application
+--      elements
+--
+-- ****************************************************************
+
+applElmtRunControlTable OBJECT-TYPE
+        SYNTAX          SEQUENCE OF ApplElmtRunControlEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This table provides the ability to control application
+            elements, complementing information available in the
+            correspondingly indexed sysApplElmtRunTable [31]."
+        ::= { applElmtRunControlGroup 2 }
+
+applElmtRunControlEntry OBJECT-TYPE
+        SYNTAX          ApplElmtRunControlEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An applElmtRunControlEntry contains information to
+           support the control of a single running application
+           element."
+        INDEX { sysApplElmtRunIndex }
+        ::= { applElmtRunControlTable 1 }
+
+ApplElmtRunControlEntry ::= SEQUENCE {
+                applElmtRunControlSuspend       TruthValue,
+                applElmtRunControlReconfigure   TestAndIncr,
+                applElmtRunControlTerminate     TruthValue }
+
+applElmtRunControlSuspend OBJECT-TYPE
+        SYNTAX            TruthValue
+        MAX-ACCESS        read-write
+        STATUS            current
+        DESCRIPTION
+           "Setting this variable to 'true' requests the suspension
+            of processing by this running application element.
+            Setting this variable to 'false' requests that processing
+            be resumed.  The effect, if any, will be reported by the
+            applElmtRunStatusSuspended attribute."
+        DEFVAL { false }
+        ::= { applElmtRunControlEntry 1 }
+
+applElmtRunControlReconfigure OBJECT-TYPE
+        SYNTAX                TestAndIncr
+        MAX-ACCESS            read-write
+        STATUS                current
+        DESCRIPTION
+           "Changing the value of this variable requests that the
+            running application element re-load its configuration
+            (like SIGHUP for many UNIX-based daemons).
+
+            Note that completion of a SET on this object only implies
+            that configuration reload was initiated, not necessarily
+            that the reload has been completed."
+        ::= { applElmtRunControlEntry 2 }
+
+applElmtRunControlTerminate OBJECT-TYPE
+        SYNTAX              TruthValue
+        MAX-ACCESS          read-write
+        STATUS              current
+        DESCRIPTION
+           "Setting the value of applElmtRunControlTerminate to
+            'true' requests that the running application element
+            terminate processing and exit in an orderly manner.
+            This is a 'polite' shutdown request.
+
+            When read, this object's value will be 'false' except
+            when orderly termination is in progress.
+
+            Note that completion of a SET on this object only implies
+            that termination was initiated, not necessarily that the
+            termination has been completed."
+        DEFVAL { false }
+        ::= { applElmtRunControlEntry 3 }
+
+-- ****************************************************************
+--
+--      Conformance requirements
+--
+-- ****************************************************************
+
+applicationMibGroups OBJECT IDENTIFIER ::=
+                        { applicationMibConformance 1}
+
+applicationMonitorGroup OBJECT-GROUP
+    OBJECTS { applSrvInstQual,
+              applSrvName,
+              applSrvIndex,
+              applSrvInstance,
+              applOpenChannelOpenTime,
+              applOpenChannelReadRequestsLow,
+              applOpenChannelReadFailures,
+              applOpenChannelBytesReadLow,
+              applOpenChannelLastReadTime,
+              applOpenChannelWriteRequestsLow,
+              applOpenChannelWriteFailures,
+              applOpenChannelBytesWrittenLow,
+              applOpenChannelLastWriteTime,
+              applOpenFileName,
+              applOpenFileSizeHigh,
+              applOpenFileSizeLow,
+              applOpenFileMode,
+              applOpenConnectionTransport,
+              applOpenConnectionNearEndAddr,
+              applOpenConnectionNearEndpoint,
+              applOpenConnectionFarEndAddr,
+              applOpenConnectionFarEndpoint,
+              applOpenConnectionApplication }
+    STATUS current
+    DESCRIPTION
+        "This group represents the basic capabilities of this MIB."
+    ::= { applicationMibGroups 1 }
+
+applicationFastMonitorGroup OBJECT-GROUP
+    OBJECTS { applOpenChannelReadRequests,
+              applOpenChannelBytesRead,
+              applOpenChannelWriteRequests,
+              applOpenChannelBytesWritten }
+    STATUS current
+    DESCRIPTION
+        "This group comprises 64-bit counters mandatory in
+         high-throughput environments, where 32-bit counters
+         could wrap in less than an hour."
+    ::= { applicationMibGroups 2 }
+
+applicationTransactGroup OBJECT-GROUP
+    OBJECTS { applTransactStreamDescr,
+              applTransactStreamUnitOfWork,
+              applTransactStreamInvokesLow,
+              applTransactStreamInvCumTimes,
+              applTransactStreamInvRspTimes,
+              applTransactStreamPerformsLow,
+              applTransactStreamPrfCumTimes,
+              applTransactStreamPrfRspTimes,
+              applTransactFlowTransLow,
+              applTransactFlowBytesLow,
+              applTransactFlowTime,
+              applTransactKindTransLow,
+              applTransactKindBytesLow,
+              applTransactKindTime }
+    STATUS current
+    DESCRIPTION
+        "This group comprises objects appropriate from monitoring
+         transaction-structured flows."
+    ::= { applicationMibGroups 3 }
+
+applicationFastTransactGroup OBJECT-GROUP
+    OBJECTS { applTransactStreamInvokes,
+              applTransactStreamPerforms,
+              applTransactFlowTrans,
+              applTransactFlowBytes,
+              applTransactKindTrans,
+              applTransactKindBytes }
+    STATUS current
+    DESCRIPTION
+        "This group comprises 64-bit transaction counters required in
+         high-throughput environments, where 32-bit counters could
+         wrap in less than an hour."
+    ::= { applicationMibGroups 4 }
+
+applicationHistoryGroup OBJECT-GROUP
+    OBJECTS { applPastChannelControlCollect,
+              applPastChannelControlMaxRows,
+              applPastChannelControlTimeLimit,
+              applPastChannelControlRemItems,
+              applPastChannelOpenTime,
+              applPastChannelCloseTime,
+              applPastChannelReadReqsLow,
+              applPastChannelReadFailures,
+              applPastChannelBytesReadLow,
+              applPastChannelLastReadTime,
+              applPastChannelWriteReqsLow,
+              applPastChannelWriteFailures,
+              applPastChannelBytesWritLow,
+              applPastChannelLastWriteTime,
+              applPastFileName,
+              applPastFileSizeHigh,
+              applPastFileSizeLow,
+              applPastFileMode,
+              applPastConTransport,
+              applPastConNearEndAddr,
+              applPastConNearEndpoint,
+              applPastConFarEndAddr,
+              applPastConFarEndpoint,
+              applPastConApplication}
+    STATUS current
+    DESCRIPTION
+        "This group models basic historical data."
+    ::= { applicationMibGroups 5 }
+
+applicationFastHistoryGroup OBJECT-GROUP
+    OBJECTS { applPastChannelReadRequests,
+              applPastChannelBytesRead,
+              applPastChannelWriteRequests,
+              applPastChannelBytesWritten}
+    STATUS current
+    DESCRIPTION
+        "This group comprises additional 64-bit objects required
+         for recording historical data in high-volume environments,
+         where a 32-bit integer would be insufficient."
+    ::= { applicationMibGroups 6 }
+
+applicationTransHistoryGroup OBJECT-GROUP
+    OBJECTS { applPastTransStreamDescr,
+              applPastTransStreamUnitOfWork,
+              applPastTransStreamInvokesLow,
+              applPastTransStreamInvCumTimes,
+              applPastTransStreamInvRspTimes,
+              applPastTransStreamPerformsLow,
+              applPastTransStreamPrfCumTimes,
+              applPastTransStreamPrfRspTimes,
+              applPastTransFlowTransLow,
+              applPastTransFlowBytesLow,
+              applPastTransFlowTime,
+              applPastTransKindTransLow,
+              applPastTransKindBytesLow,
+              applPastTransKindTime }
+    STATUS current
+    DESCRIPTION
+        "This group represents historical data for transaction-
+         structured information streams."
+    ::= { applicationMibGroups 7 }
+
+applicationFastTransHistoryGroup OBJECT-GROUP
+    OBJECTS { applPastTransFlowTrans,
+              applPastTransFlowBytes,
+              applPastTransKindTrans,
+              applPastTransKindBytes,
+              applPastTransStreamPerforms,
+              applPastTransStreamInvokes }
+    STATUS current
+    DESCRIPTION
+        "This group contains 64-bit objects required for historical
+         records on high-volume transaction-structured streams,
+         where 32-bit integers would be insufficient."
+    ::= { applicationMibGroups 8 }
+
+applicationRunGroup OBJECT-GROUP
+    OBJECTS { applElmtRunStatusSuspended,
+              applElmtRunStatusHeapUsage,
+              applElmtRunStatusOpenConnections,
+              applElmtRunStatusOpenFiles,
+              applElmtRunStatusLastErrorMsg,
+              applElmtRunStatusLastErrorTime,
+              applElmtRunControlSuspend,
+              applElmtRunControlReconfigure,
+              applElmtRunControlTerminate }
+    STATUS current
+    DESCRIPTION
+        "This group represents extensions to the system application
+         MIB."
+    ::= { applicationMibGroups 9 }
+
+applicationMibCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION "The compliance statement for the application MIB."
+    MODULE
+        MANDATORY-GROUPS { applicationMonitorGroup,
+                           applicationHistoryGroup,
+                           applicationRunGroup }
+
+            OBJECT applPastChannelControlCollect
+                MIN-ACCESS read-only
+                DESCRIPTION
+                    "This object should be limited to read-only
+                     access in environments with inadequate
+                     security."
+
+            OBJECT applPastChannelControlMaxRows
+                MIN-ACCESS read-only
+                DESCRIPTION
+                    "This object should be limited to read-only
+                     access in environments with inadequate
+                     security."
+
+            OBJECT applPastChannelControlTimeLimit
+                MIN-ACCESS read-only
+                DESCRIPTION
+                    "This object should be limited to read-only
+                     access in environments with inadequate
+                     security."
+
+            OBJECT applElmtRunControlSuspend
+                MIN-ACCESS read-only
+                DESCRIPTION
+                    "This object should be limited to read-only
+                     access in environments with inadequate
+                     security."
+
+            OBJECT applElmtRunControlReconfigure
+                MIN-ACCESS read-only
+                DESCRIPTION
+                    "This object should be limited to read-only
+                     access in environments with inadequate
+                     security."
+
+            OBJECT applElmtRunControlTerminate
+                MIN-ACCESS read-only
+                DESCRIPTION
+                    "This object should be limited to read-only
+                     access in environments with inadequate
+                     security."
+
+        GROUP applicationTransactGroup
+        DESCRIPTION
+            "The applicationTransactGroup is required when the
+             information stream processed has a transaction
+             structure. "
+
+        GROUP applicationTransHistoryGroup
+        DESCRIPTION
+            "The applicationTransHistoryGroup must be implemented
+             if applicationTransactGroup and applicationHistoryGroup
+             are implemented."
+
+        GROUP applicationFastMonitorGroup
+        DESCRIPTION
+           "The applicationFastMonitorGroup is mandatory when
+            the applicationMonitorGroup is implemented and its
+            counts group may exceed what can be represented in 32 bits."
+
+        GROUP applicationFastTransactGroup
+        DESCRIPTION
+           "The applicationFastTransactGroup is mandatory when
+            the applicationTransactGroup is implemented and its
+            counts may exceed what can be represented in 32 bits."
+
+        GROUP applicationFastHistoryGroup
+        DESCRIPTION
+           "The applicationFastHistoryGroup is mandatory when
+            the applicationHistoryGroup is implemented and its
+            counts may exceed what can be represented in 32 bits."
+
+        GROUP applicationFastTransHistoryGroup
+        DESCRIPTION
+           "The applicationFastTransHistoryGroup is mandatory when
+            the applicationTransHistoryGroup is implemented and its
+            counts may exceed what can be represented in 32 bits."
+    ::= { applicationMibConformance 2 }
+
+END
diff --git a/snmp_builder/mibs/APPN-DLUR-MIB.mib b/snmp_builder/mibs/APPN-DLUR-MIB.mib
new file mode 100644
index 0000000..eadb685
--- /dev/null
+++ b/snmp_builder/mibs/APPN-DLUR-MIB.mib
@@ -0,0 +1,632 @@
+APPN-DLUR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        DisplayString, TruthValue
+                FROM SNMPv2-TC
+
+        OBJECT-TYPE, MODULE-IDENTITY, Unsigned32
+                FROM SNMPv2-SMI
+
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF
+
+        snanauMIB
+                FROM SNA-NAU-MIB
+
+        SnaControlPointName
+                FROM APPN-MIB;
+
+dlurMIB MODULE-IDENTITY
+        LAST-UPDATED  "9705101500Z"
+        ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN/HPR MIBs SIG"
+        CONTACT-INFO
+                "
+                        Bob Clouston
+                        Cisco Systems
+                        7025 Kit Creek Road
+                        P.O. Box 14987
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 472 2333
+                        E-mail: clouston@cisco.com
+
+                        Bob Moore
+                        IBM Corporation
+                        800 Park Offices Drive
+                        RHJA/664
+                        P.O. Box 12195
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 254 4436
+                        E-mail: remoore@ralvm6.vnet.ibm.com
+                "
+      DESCRIPTION
+                "This is the MIB module for objects used to manage
+                network devices with DLUR capabilities.  This MIB
+                contains information that is useful for managing an APPN
+                product that implements a DLUR (Dependent Logical Unit
+
+                Requester).  The DLUR product has a client/server
+                relationship with an APPN product that implements a DLUS
+                (Dependent Logical Unit Server)."
+::= { snanauMIB 5 }
+-- snanauMIB ::= { mib-2 34 }
+
+-- *********************************************************************
+-- Textual Convention
+-- *********************************************************************
+-- SnaControlPointName is imported from the APPN MIB
+
+-- *********************************************************************
+  dlurObjects OBJECT IDENTIFIER ::= { dlurMIB 1 }
+-- *********************************************************************
+
+dlurNodeInfo OBJECT IDENTIFIER ::= { dlurObjects 1 }
+-- *********************************************************************
+-- DLUR Capabilities of the node
+--
+--  This group represents the capabilities and options of the DLUR
+--  implementation.
+-- *********************************************************************
+dlurNodeCapabilities OBJECT IDENTIFIER ::= { dlurNodeInfo 1 }
+
+dlurNodeCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned network name for the APPN node where
+          this DLUR implementation resides.  If this object has the same
+          value as the appnNodeCpName object in the APPN MIB, then the
+          two objects are referring to the same APPN node."
+      ::= { dlurNodeCapabilities 1 }
+
+dlurReleaseLevel OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (2))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The DLUR release level of this implementation.  This is the
+          value that is encoded in the DLUR/DLUS Capabilites (CV 51).
+          To insure consistent display, this one-byte value is encoded
+          here as two displayable characters that are equivalent to a
+          hexadecimal display.  For example, if the one-byte value as
+
+          encoded in CV51 is X'01', this object will contain the
+          displayable string '01'."
+      ::= { dlurNodeCapabilities 2 }
+
+dlurAnsSupport OBJECT-TYPE
+      SYNTAX INTEGER {
+                     continueOrStop(1),
+                     stopOnly(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Automatic Network Shutdown (ANS) capability of this node.
+
+              -  'continueOrStop' indicates that the DLUR implementation
+                 supports either ANS value (continue or stop) as
+                 specified by the DLUS on ACTPU for each PU.
+
+              -  'stopOnly' indicates that the DLUR implementation only
+                 supports the ANS value of stop.
+
+           ANS = continue means that the DLUR node will keep LU-LU
+           sessions active even if SSCP-PU and SSCP-LU control sessions
+           are interrupted.
+
+           ANS = stop means that LU-LU sessions will be interrupted when
+           the SSCP-PU and SSCP-LU sessions are interrupted."
+      ::= { dlurNodeCapabilities 3 }
+
+dlurMultiSubnetSupport OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indication of whether this DLUR implementation can support
+          CPSVRMGR sessions that cross NetId boundaries."
+      ::= { dlurNodeCapabilities 4 }
+
+dlurDefaultDefPrimDlusName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the defined default primary DLUS for all of
+          the PUs served by this DLUR.  This can be overridden for a
+
+          particular PU by a defined primary DLUS for that PU,
+          represented by the dlurPuDefPrimDlusName object."
+      ::= { dlurNodeCapabilities 5 }
+
+dlurNetworkNameForwardingSupport OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indication of whether this DLUR implementation supports
+          forwarding of Network Name control vectors on ACTPUs and
+          ACTLUs to DLUR-served PUs and their associated LUs.
+
+          This object corresponds to byte 9. bit 3 of cv51."
+      ::= { dlurNodeCapabilities 6 }
+
+dlurNondisDlusDlurSessDeactSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indication of whether this DLUR implementation supports
+          nondisruptive deactivation of its DLUR-DLUS sessions.
+          Upon receiving from a DLUS an UNBIND for the CPSVRMGR pipe
+          with sense data X'08A0 000B', a DLUR that supports this
+          option immediately begins attempting to activate a CPSVRMGR
+          pipe with a DLUS other than the one that sent the UNBIND.
+
+          This object corresponds to byte 9. bit 4 of cv51."
+      ::= { dlurNodeCapabilities 7 }
+
+-- *********************************************************************
+-- DLUR default defined backup DLUS table
+-- *********************************************************************
+
+dlurDefaultDefBackupDlusTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF DlurDefaultDefBackupDlusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains an ordered list of defined backup DLUSs
+          for all of the PUs served by this DLUR.  These can be
+          overridden for a particular PU by a list of defined backup
+          DLUSs for that PU, represented by the
+          dlurPuDefBackupDlusNameTable.  Entries in this table are
+
+          ordered from most preferred default backup DLUS to least
+          preferred."
+      ::= { dlurNodeInfo 2 }
+
+dlurDefaultDefBackupDlusEntry OBJECT-TYPE
+      SYNTAX DlurDefaultDefBackupDlusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by an integer-valued index, which
+          orders the entries from most preferred default backup DLUS
+          to least preferred."
+      INDEX { dlurDefaultDefBackupDlusIndex }
+      ::= { dlurDefaultDefBackupDlusTable 1 }
+
+DlurDefaultDefBackupDlusEntry ::= SEQUENCE {
+      dlurDefaultDefBackupDlusIndex      Unsigned32,
+      dlurDefaultDefBackupDlusName       SnaControlPointName
+                     }
+
+dlurDefaultDefBackupDlusIndex OBJECT-TYPE
+      SYNTAX Unsigned32 (1..4294967295)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Index for this table.  The index values start at 1,
+          which identifies the most preferred default backup DLUS."
+      ::= { dlurDefaultDefBackupDlusEntry 1 }
+
+dlurDefaultDefBackupDlusName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified name of a default backup DLUS for PUs served
+          by this DLUR."
+      ::= { dlurDefaultDefBackupDlusEntry 2 }
+
+-- *********************************************************************
+-- PU Information
+--
+--  The following table carries information about the PUs that this APPN
+--  node is supporting via DLUR.
+
+-- *********************************************************************
+dlurPuInfo OBJECT IDENTIFIER ::= { dlurObjects 2 }
+
+dlurPuTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF DlurPuEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Information about the PUs supported by this DLUR."
+      ::= { dlurPuInfo 1 }
+
+dlurPuEntry OBJECT-TYPE
+      SYNTAX DlurPuEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry in a table of PU information, indexed by PU name."
+      INDEX { dlurPuName  }
+      ::= { dlurPuTable 1 }
+
+DlurPuEntry ::= SEQUENCE {
+      dlurPuName                  DisplayString,
+      dlurPuSscpSuppliedName      DisplayString,
+      dlurPuStatus                INTEGER,
+      dlurPuAnsSupport            INTEGER,
+      dlurPuLocation              INTEGER,
+      dlurPuLsName                DisplayString,
+      dlurPuDlusSessnStatus       INTEGER,
+      dlurPuActiveDlusName        DisplayString,
+      dlurPuDefPrimDlusName       DisplayString
+                     }
+
+dlurPuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Locally administered name of the PU."
+      ::= { dlurPuEntry 1 }
+
+dlurPuSscpSuppliedName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the PU.  This value is supplied to a PU by the
+          SSCP that activated it.  If a value has not been supplied, a
+          zero-length string is returned."
+      ::= { dlurPuEntry 2 }
+
+dlurPuStatus OBJECT-TYPE
+      SYNTAX INTEGER {
+                      reset(1),
+                      pendReqActpuRsp(2),
+                      pendActpu(3),
+                      pendActpuRsp(4),
+                      active(5),
+                      pendLinkact(6),
+                      pendDactpuRsp(7),
+                      pendInop(8),
+                      pendInopActpu(9)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Status of the DLUR-supported PU.  The following values are
+          defined:
+
+             reset(1)           -  reset
+             pendReqActpuRsp(2) -  pending a response from the DLUS
+                                   to a Request ACTPU
+             pendActpu(3)       -  pending an ACTPU from the DLUS
+             pendActpuRsp(4)    -  pending an ACTPU response from the PU
+             active(5)          -  active
+             pendLinkact(6)     -  pending activation of the link to a
+                                   downstream PU
+             pendDactpuRsp(7)   -  pending a DACTPU response from the PU
+             pendInop(8)        -  the CPSVRMGR pipe became inoperative
+                                   while the DLUR was pending an ACTPU
+                                   response from the PU
+             pendInopActpu(9)   -  when the DLUR was in the pendInop
+                                   state, a CPSVRMGR pipe became active
+                                   and a new ACTPU was received over it,
+                                   before a response to the previous
+                                   ACTPU was received from the PU."
+      ::= { dlurPuEntry 3 }
+
+dlurPuAnsSupport OBJECT-TYPE
+      SYNTAX INTEGER {
+
+                     continue(1),
+                     stop(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The Automatic Network Shutdown (ANS) support configured for
+          this PU.  This value (as configured by the network
+          administrator) is sent by DLUS with ACTPU for each PU.
+
+              -  'continue' means that the DLUR node will attempt to keep
+                 LU-LU sessions active even if SSCP-PU and SSCP-LU
+                 control sessions are interrupted.
+
+              -  'stop' means that LU-LU sessions will be interrupted
+                 when the SSCP-PU and SSCP-LU sessions are interrupted."
+      ::= { dlurPuEntry 4 }
+
+dlurPuLocation OBJECT-TYPE
+      SYNTAX INTEGER {
+                      internal(1),
+                      downstream(2) }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Location of the DLUR-support PU:
+              internal(1)   - internal to the APPN node itself (no link)
+              downstream(2) - downstream of the APPN node (connected via
+                              a link)."
+      ::= { dlurPuEntry 5 }
+
+dlurPuLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name of the link station through
+          which a downstream PU is connected to this DLUR.  A zero-length
+          string is returned for internal PUs.  If this object has the
+          same value as the appnLsName object in the APPN MIB, then the
+          two are identifying the same link station."
+      ::= { dlurPuEntry 6 }
+
+dlurPuDlusSessnStatus OBJECT-TYPE
+      SYNTAX INTEGER {
+
+                      reset(1),
+                      pendingActive(2),
+                      active(3),
+                      pendingInactive(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Status of the control session to the DLUS identified in
+          dlurPuActiveDlusName.  This is a combination of the separate
+          states for the contention-winner and contention-loser sessions:
+
+          reset(1)           - none of the cases below
+          pendingActive(2)   - either contention-winner session or
+                               contention-loser session is pending active
+          active(3)          - contention-winner and contention-loser
+                               sessions are both active
+          pendingInactive(4) - either contention-winner session or
+                               contention-loser session is pending
+                               inactive - this test is made AFTER the
+                               'pendingActive' test.
+
+          The following matrix provides a different representation of
+          how the values of this object are related to the individual
+          states of the contention-winner and contention-loser sessions:
+
+               Conwinner
+               | pA | pI | A | X = !(pA | pI | A)
+          C ++++++++++++++++++++++++++++++++++
+          o pA | 2  |  2 | 2 | 2
+          n ++++++++++++++++++++++++++++++++++
+          l pI | 2  |  4 | 4 | 4
+          o ++++++++++++++++++++++++++++++++++
+          s A  | 2  |  4 | 3 | 1
+          e ++++++++++++++++++++++++++++++++++
+          r X  | 2  |  4 | 1 | 1
+            ++++++++++++++++++++++++++++++++++
+          "
+      ::= { dlurPuEntry 7 }
+
+dlurPuActiveDlusName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the active DLUS for this PU.  If its length
+          is not zero, this name follows the SnaControlPointName textual
+
+          convention.  A zero-length string indicates that the PU does
+          not currently have an active DLUS."
+      ::= { dlurPuEntry 8 }
+
+dlurPuDefPrimDlusName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The SNA name of the defined primary DLUS for this PU, if one
+          has been defined.  If present, this name follows the
+          SnaControlPointName textual convention.  A zero-length string
+          indicates that no primary DLUS has been defined for this PU, in
+          which case the global default represented by the
+          dlurDefaultDefPrimDlusName object is used."
+      ::= { dlurPuEntry 9 }
+
+-- *****************************************
+-- Defined backup DLUS table for a PU
+-- *****************************************
+
+dlurPuDefBackupDlusTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF DlurPuDefBackupDlusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains an ordered list of defined backup DLUSs
+          for those PUs served by this DLUR that have their own defined
+          backup DLUSs.  PUs that have no entries in this table use the
+          global default backup DLUSs for the DLUR, represented by the
+          dlurDefaultDefBackupDlusNameTable.  Entries in this table are
+          ordered from most preferred backup DLUS to least preferred for
+          each PU."
+      ::= { dlurPuInfo 2 }
+
+dlurPuDefBackupDlusEntry OBJECT-TYPE
+      SYNTAX DlurPuDefBackupDlusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by PU name and by an integer-valued
+          index, which orders the entries from most preferred backup DLUS
+          for the PU to least preferred."
+      INDEX { dlurPuDefBackupDlusPuName,
+              dlurPuDefBackupDlusIndex }
+      ::= { dlurPuDefBackupDlusTable 1 }
+
+DlurPuDefBackupDlusEntry ::= SEQUENCE {
+      dlurPuDefBackupDlusPuName          DisplayString,
+      dlurPuDefBackupDlusIndex           Unsigned32,
+      dlurPuDefBackupDlusName            SnaControlPointName
+                     }
+
+dlurPuDefBackupDlusPuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Locally administered name of the PU.  If this object has the
+          same value as the dlurPuName object, then the two are
+          identifying the same PU."
+      ::= { dlurPuDefBackupDlusEntry 1 }
+
+dlurPuDefBackupDlusIndex OBJECT-TYPE
+      SYNTAX Unsigned32 (1..4294967295)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Secondary index for this table.  The index values start at 1,
+          which identifies the most preferred backup DLUS for the PU."
+      ::= { dlurPuDefBackupDlusEntry 2 }
+
+dlurPuDefBackupDlusName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified name of a backup DLUS for this PU."
+      ::= { dlurPuDefBackupDlusEntry 3 }
+
+-- *********************************************************************
+--               DLUS Control Sessions (CPSVRMGR Pipes)
+--
+--  This table contains information about DLUS control sessions, also
+--  known as CPSVRMGR pipes.  Although DLUR uses a pair of CPSVRMGR
+--  sessions for communication, for the purpose of status, information
+--  about these two sessions is combined to yield a single status for the
+--  requester/server connection.
+
+-- *********************************************************************
+
+dlurDlusInfo OBJECT IDENTIFIER ::= { dlurObjects 3 }
+
+dlurDlusTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF DlurDlusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+           "Information about DLUS control sessions."
+      ::= { dlurDlusInfo 1}
+
+dlurDlusEntry OBJECT-TYPE
+      SYNTAX DlurDlusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+           "This entry is indexed by the name of the DLUS."
+      INDEX { dlurDlusName }
+      ::= { dlurDlusTable 1 }
+
+DlurDlusEntry ::= SEQUENCE {
+      dlurDlusName          SnaControlPointName,
+      dlurDlusSessnStatus   INTEGER
+                     }
+
+dlurDlusName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The SNA name of a DLUS with which this DLUR currently has a
+          CPSVRMGR pipe established."
+      ::= { dlurDlusEntry 1 }
+
+dlurDlusSessnStatus OBJECT-TYPE
+      SYNTAX INTEGER {
+                      reset(1),
+                      pendingActive(2),
+                      active(3),
+                      pendingInactive(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Status of the CPSVRMGR pipe between the DLUR and this DLUS.
+          This is a combination of the separate states for the
+          contention-winner and contention-loser sessions:
+
+          reset(1)           - none of the cases below
+          pendingActive(2)   - either contention-winner session or
+                               contention-loser session is pending active
+          active(3)          - contention-winner and contention-loser
+                               sessions are both active
+          pendingInactive(4) - either contention-winner session or
+                               contention-loser session is pending
+                               inactive - this test is made AFTER the
+                               'pendingActive' test.
+
+          The following matrix provides a different representation of
+          how the values of this object are related to the individual
+          states of the contention-winner and contention-loser sessions:
+
+               Conwinner
+               | pA | pI | A | X = !(pA | pI | A)
+          C ++++++++++++++++++++++++++++++++++
+          o pA | 2  |  2 | 2 | 2
+          n ++++++++++++++++++++++++++++++++++
+          l pI | 2  |  4 | 4 | 4
+          o ++++++++++++++++++++++++++++++++++
+          s A  | 2  |  4 | 3 | 1
+          e ++++++++++++++++++++++++++++++++++
+          r X  | 2  |  4 | 1 | 1
+            ++++++++++++++++++++++++++++++++++
+          "
+      ::= { dlurDlusEntry 2 }
+
+-- ***************************************************************
+-- Conformance information
+-- ***************************************************************
+
+dlurConformance       OBJECT IDENTIFIER ::= { dlurMIB 2 }
+
+dlurCompliances       OBJECT IDENTIFIER ::= { dlurConformance 1 }
+dlurGroups            OBJECT IDENTIFIER ::= { dlurConformance 2 }
+
+-- Compliance statements
+
+dlurCompliance MODULE-COMPLIANCE
+      STATUS current
+      DESCRIPTION
+          "The compliance statement for the SNMPv2 entities which
+          implement the DLUR MIB."
+
+      MODULE -- this module
+
+--    Unconditionally mandatory groups
+      MANDATORY-GROUPS  { dlurConfGroup }
+      ::= { dlurCompliances 1 }
+
+-- Units of conformance
+dlurConfGroup OBJECT-GROUP
+      OBJECTS {
+               dlurNodeCpName,
+               dlurReleaseLevel,
+               dlurAnsSupport,
+               dlurMultiSubnetSupport,
+               dlurNetworkNameForwardingSupport,
+               dlurNondisDlusDlurSessDeactSup,
+               dlurDefaultDefPrimDlusName,
+               dlurDefaultDefBackupDlusName,
+               dlurPuSscpSuppliedName,
+               dlurPuStatus,
+               dlurPuAnsSupport,
+               dlurPuLocation,
+               dlurPuLsName,
+               dlurPuDlusSessnStatus,
+               dlurPuActiveDlusName,
+               dlurPuDefPrimDlusName,
+               dlurPuDefBackupDlusName,
+               dlurDlusSessnStatus
+              }
+      STATUS current
+      DESCRIPTION
+          "A collection of objects providing information on an
+          implementation of APPN DLUR."
+      ::= { dlurGroups 1 }
+
+-- end of conformance statement
+
+END
diff --git a/snmp_builder/mibs/APPN-MIB.mib b/snmp_builder/mibs/APPN-MIB.mib
new file mode 100644
index 0000000..a103dab
--- /dev/null
+++ b/snmp_builder/mibs/APPN-MIB.mib
@@ -0,0 +1,5611 @@
+APPN-MIB DEFINITIONS          ::= BEGIN
+
+IMPORTS
+
+        IANAifType
+                FROM IANAifType-MIB
+
+        DisplayString, VariablePointer, RowPointer, DateAndTime,
+        TruthValue, TimeStamp, TEXTUAL-CONVENTION
+                FROM SNMPv2-TC
+
+        Counter32, Gauge32, Unsigned32, TimeTicks,
+        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+                FROM SNMPv2-SMI
+
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+
+        snanauMIB
+                FROM SNA-NAU-MIB;
+
+appnMIB MODULE-IDENTITY
+        LAST-UPDATED  "9807151800Z"  -- July 15, 1998
+        ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
+        CONTACT-INFO
+                "
+
+                        Bob Clouston
+                        Cisco Systems
+                        7025 Kit Creek Road
+                        P.O. Box 14987
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 472 2333
+                        E-mail: clouston@cisco.com
+
+                        Bob Moore
+                        IBM Corporation
+                        4205 S. Miami Boulevard
+                        BRQA/501
+                        P.O. Box 12195
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 254 4436
+                        E-mail: remoore@us.ibm.com
+                "
+      DESCRIPTION
+                "This is the MIB module for objects used to
+                 manage network devices with APPN capabilities."
+
+      -- Revision tracking starts with Proposed Standard (RFC 2155)
+      REVISION  "9807151800Z"
+      DESCRIPTION
+                "Minor editorial fixes; new value 'none(5)' added
+                to the enumeration for the appnLocalTgBranchLinkType
+                object."
+
+      REVISION  "9805261800Z"
+      DESCRIPTION
+                "Post-RFC 2155 conformance definitions added,
+                appnNodeLsCounterType and appnNodeBrNn objects
+                added, appnNodeMibVersion object deprecated."
+
+      REVISION  "9707311800Z"
+      DESCRIPTION
+                "Branch network node (Branch Extender) objects added."
+      REVISION  "9703311800Z"
+      DESCRIPTION
+                "MLTG objects added."
+      REVISION  "9703201200Z"
+      DESCRIPTION
+                "RFC 2155 (Proposed Standard)"
+::= { snanauMIB 4 }
+-- snanauMIB ::= { mib-2 34 }
+
+-- *********************************************************************
+-- Textual Conventions
+-- *********************************************************************
+SnaNodeIdentification ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An SNA Node Identification consists of two parts, which
+          together comprise four bytes of hexadecimal data.  In SNA the
+          Node Identification is transported in bytes 2-5 of the XID.
+
+          The block number is the first three digits of the Node
+          Identification.  These 3 hexadecimal digits identify the
+          product.
+
+          The ID number is the last 5 digits of the Node Identification.
+          These 5 hexadecimal digits are administratively defined and
+          combined with the 3-digit block number form the 8-digit Node
+          Identification.  A unique value is required for connections to
+          SNA subarea.  In some implementations, the value 'bbb00000'
+          (where 'bbb' represents a 3-digit block number) is returned to
+          mean that the ID number is not unique on this node.
+
+          An SNA Node Identification is represented as eight
+          ASCII-encoded hexadecimal digits, using the characters '0' -
+          '9' and 'A' - 'F'."
+      SYNTAX OCTET STRING (SIZE (8))
+
+SnaControlPointName ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "A fully qualified SNA control point name, consisting of a 1 to
+          8 character network identifier (NetId), a period ('.'), and a 1
+          to 8 character control point name (CpName).
+
+          The NetId and CpName are constructed from the uppercase letters
+          'A' - 'Z' and the numerics '0' - '9', all encoded in ASCII,
+          with the restriction that the first character of each must be
+          a letter.  Trailing blanks are not allowed.
+
+          Earlier versions of SNA permitted three additional characters
+          in NetIds and CpNames:  '#', '@', and '$'.  While this use of
+          these characters has been retired, a Management Station should
+          still accept them for backward compatibility."
+      SYNTAX OCTET STRING (SIZE (3..17))
+
+SnaClassOfServiceName ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An SNA class-of-service (COS) name, ranging from 1 to 8
+          ASCII characters.  COS names take one of two forms:
+
+             -  a user-defined COS name is constructed from the uppercase
+                letters 'A' - 'Z' and the numerics '0' - '9', with the
+                restriction that the first character of the name must be
+                a letter.
+             -  an SNA-defined user-session COS name begins with the
+                character '#', which is followed by up to seven
+                additional characters from the set of uppercase letters
+                and numerics.
+
+          Trailing blanks are not allowed in either form of COS name.
+
+          A zero-length string indicates that a COS name is not
+          available."
+      SYNTAX OCTET STRING (SIZE (0..8))
+
+SnaModeName ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An SNA mode name, ranging from 1 to 8 ASCII characters.
+          Mode names take one of two forms:
+
+             -  a user-defined mode name is constructed from the
+                uppercase letters 'A' - 'Z' and the numerics '0' - '9',
+                with the restriction that the first character of the name
+                must be a letter.
+             -  an SNA-defined user-session mode name begins with the
+                character '#', which is followed by up to seven
+                additional characters from the set of uppercase letters
+                and numerics.
+
+          Trailing blanks are not allowed in either form of mode name,
+          with the single exception of the all-blank mode name, where
+          a string consisting of 8 blanks is returned.
+
+          A zero-length string indicates that a mode name is not
+          available."
+      SYNTAX OCTET STRING (SIZE (0..8))
+
+SnaSenseData ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "To facilitate their display by a Management Station, sense
+          data objects in the MIB are represented as OCTET STRINGS
+          containing eight ASCII characters.  Eight '0' characters
+          indicates that no sense data identifying an SNA error
+          condition is available.
+
+          An SNA sense data is represented as eight hexadecimal digits,
+          using the characters '0' - '9' and 'A' - 'F'."
+      SYNTAX OCTET STRING (SIZE (8))
+
+DisplayableDlcAddress ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "DLC address of a port or link station, represented as an
+          OCTET STRING containing 0 to 64 ASCII characters.
+          A Management Station should use a value of this type only
+          for display.  The 'real' DLC address, i.e., the sequence of
+          bytes that flow in the DLC header, is often available in a
+          DLC-specific MIB.
+
+          The zero-length string indicates that the DLC address in
+          question is not known to the agent."
+      SYNTAX OCTET STRING (SIZE (0..64))
+
+AppnNodeCounter ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An object providing global statistics for the entire APPN
+          node.  A Management Station can detect discontinuities in this
+          counter by monitoring the appnNodeCounterDisconTime object."
+      SYNTAX Counter32
+
+AppnPortCounter ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An object providing statistics for an APPN port.  A
+          Management Station can detect discontinuities in this counter
+          by monitoring the appnPortCounterDisconTime object."
+      SYNTAX Counter32
+
+AppnLinkStationCounter ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An object providing statistics for an APPN link station.  A
+          Management Station can detect discontinuities in this counter
+          by monitoring the appnLsCounterDisconTime object."
+      SYNTAX Counter32
+
+AppnTopologyEntryTimeLeft ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "Number of days before deletion of this entry from the topology
+          database.  Range is 0-15.  A value of 0 indicates that the
+          entry is either in the process of being deleted, or is being
+          marked for deletion at the next garbage collection cycle."
+      SYNTAX INTEGER (0..15)
+
+AppnTgDlcData ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "DLC-specific data related to a connection network transmission
+          group.  For other TGs, a zero-length string is returned.
+
+          Examples of the type of data returned by an object with this
+          syntax include the following:
+
+                Token-Ring      - MAC/SAP
+                X.25 Switched   - dial digits
+                X.21 Switched   - dial digits
+                Circuit Switch  - dial digits
+
+          This MIB does not specify formats for these or any other types
+          of DLC-specific data.  Formats may, however, be specified in
+          documents related to a particular DLC.
+
+          The contents of an object with this syntax correspond to the
+          contents of the DLC-specific subfields of cv46, documented in
+          (6)."
+      SYNTAX OCTET STRING  (SIZE (0..64))
+
+AppnTgEffectiveCapacity ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "A value representing the effective capacity of a transmission
+          group.  This is an administratively assigned value derived from
+          the link bandwidth and maximum load factor.  It is encoded in
+          the same way as byte 7 of cv47, and represents a floating-point
+          number in units of 300 bits per second."
+      SYNTAX OCTET STRING (SIZE (1))
+
+AppnTgSecurity ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "A value representing the level of security on a transmission
+          group.  A class of service definition includes an indication of
+          the acceptable TG security value(s) for that class of service.
+
+          The following seven values are defined:
+
+            nonsecure(1) -
+                              (X'01'):  none of the values listed below;
+                              for example, satellite-connected or
+                              located in a nonsecure country
+            publicSwitchedNetwork(32) -
+                              (X'20'):  public switched network; secure
+                              in the sense that there is no
+                              predetermined route that traffic will take
+            undergroundCable(64) -
+                              (X'40'):  underground cable; located in a
+                              secure country (as determined by the
+                              network administrator)
+            secureConduit(96) -
+                              (X'60'):  secure conduit, not guarded; for
+                              example, pressurized pipe
+            guardedConduit(128) -
+                              (X'80'):  guarded conduit; protected
+                              against physical tapping
+
+            encrypted(160) -
+                              (X'A0'):  link-level encryption is provided
+            guardedRadiation(192) -
+                              (X'C0'):  guarded conduit containing the
+                              transmission medium; protected against
+                              physical and radiation tapping"
+      SYNTAX INTEGER {
+                     nonsecure(1),               -- X'01'
+                     publicSwitchedNetwork(32),  -- X'20'
+                     undergroundCable(64),       -- X'40'
+                     secureConduit(96),          -- X'60'
+                     guardedConduit(128),        -- X'80'
+                     encrypted(160),             -- X'A0'
+                     guardedRadiation(192)       -- X'C0'
+                     }
+
+AppnTgDelay ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "Relative amount of time that it takes for a signal to travel
+          the length of a logical link.  This time is represented in
+          microseconds, using the same encoding scheme used in cv47 in a
+          topology update.  Some of the more common values, along with
+          their encoded hex values, are:
+
+                     minimum(0),                 X'00'
+                     negligible(384),            X'4C'
+                     terrestrial(9216),          X'71'
+                     packet(147456),             X'91'
+                     long(294912),               X'99'
+                     maximum(2013265920)         X'FF'
+          "
+      SYNTAX OCTET STRING (SIZE (1))
+
+-- *********************************************************************
+  appnObjects             OBJECT IDENTIFIER ::= { appnMIB 1 }
+-- *********************************************************************
+
+-- ******************** The APPN Node Group ****************************
+
+appnNode              OBJECT IDENTIFIER ::= { appnObjects 1 }
+  appnGeneralInfoAndCaps      OBJECT IDENTIFIER ::= { appnNode 1 }
+  appnNnUniqueInfoAndCaps     OBJECT IDENTIFIER ::= { appnNode 2 }
+  appnEnUniqueCaps            OBJECT IDENTIFIER ::= { appnNode 3 }
+  appnPortInformation         OBJECT IDENTIFIER ::= { appnNode 4 }
+
+  appnLinkStationInformation  OBJECT IDENTIFIER ::= { appnNode 5 }
+  appnVrnInfo                 OBJECT IDENTIFIER ::= { appnNode 6 }
+
+-- This group provides global information about an APPN network node,
+-- an APPN end node, an APPN branch network node, or an LEN node.
+
+-- APPN General Information
+-- This section applies to APPN network nodes, end nodes, and branch
+-- network nodes, as well as to LEN end nodes.
+
+appnNodeCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned network name for this node."
+      ::= { appnGeneralInfoAndCaps 1 }
+
+-- appnNodeMibVersion OBJECT-TYPE (deprecated:  moved to end of module)
+
+appnNodeId OBJECT-TYPE
+      SYNTAX SnaNodeIdentification
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This node's Node Identification, which it sends in bytes
+          2-5 of XID."
+      ::= { appnGeneralInfoAndCaps 3 }
+
+appnNodeType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networkNode(1),
+                     endNode(2),
+                     t21len(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Type of APPN node:
+
+                networkNode(1) - APPN network node
+                endNode(2)     - APPN end node
+                t21len(4)      - LEN end node
+
+          Note:  A branch network node SHALL return endNode(2)
+          as the value of this object.  A management application
+
+          can distinguish between a branch network node and an
+          actual end node by retrieving the appnNodeBrNn object."
+      ::= { appnGeneralInfoAndCaps 4 }
+
+appnNodeUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Amount of time (in hundredths of a second) since the APPN node
+          was last reinitialized."
+      ::= { appnGeneralInfoAndCaps 5 }
+
+appnNodeParallelTg OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node supports parallel TGs."
+      ::= { appnGeneralInfoAndCaps 6 }
+
+appnNodeAdaptiveBindPacing OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node supports adaptive bind pacing for
+          dependent LUs."
+      ::= { appnGeneralInfoAndCaps 7 }
+
+appnNodeHprSupport OBJECT-TYPE
+      SYNTAX INTEGER {
+                 noHprSupport(1),
+                 hprBaseOnly(2),
+                 rtpTower(3),
+                 controlFlowsOverRtpTower(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates this node's level of support for high-performance
+          routing (HPR):
+
+             noHprSupport(1)             - no HPR support
+             hprBaseOnly(2)              - HPR base (option set 1400)
+                                           supported
+             rtpTower(3)                 - HPR base and RTP tower
+                                           (option set 1401) supported
+             controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+                                           control flows over RTP
+                                           (option set 1402) supported
+
+          This object corresponds to cv4580, byte 9, bits 3-4."
+      ::= { appnGeneralInfoAndCaps 8 }
+
+appnNodeMaxSessPerRtpConn OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object represents a configuration parameter indicating
+          the maximum number of sessions that the APPN node is to put on
+          any HPR connection.  The value is zero if not applicable."
+      ::= { appnGeneralInfoAndCaps 9 }
+
+appnNodeHprIntRteSetups OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of HPR route setups received for routes
+          passing through this node since the node was last
+          reinitialized."
+      ::= { appnGeneralInfoAndCaps 10 }
+
+appnNodeHprIntRteRejects OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of HPR route setups rejected by this node for
+          routes passing through it since the node was last
+          reinitialized."
+      ::= { appnGeneralInfoAndCaps 11 }
+
+appnNodeHprOrgRteSetups OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of HPR route setups sent for routes
+          originating in this node since the node was last
+          reinitialized."
+      ::= { appnGeneralInfoAndCaps 12 }
+
+appnNodeHprOrgRteRejects OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of HPR route setups rejected by other nodes for
+          routes originating in this node since the node was last
+          reinitialized."
+      ::= { appnGeneralInfoAndCaps 13 }
+
+appnNodeHprEndRteSetups OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of HPR route setups received for routes
+          ending in this node since the node was last reinitialized."
+      ::= { appnGeneralInfoAndCaps 14 }
+
+appnNodeHprEndRteRejects OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of HPR route setups rejected by this node for
+          routes ending in it since the node was last reinitialized."
+      ::= { appnGeneralInfoAndCaps 15 }
+
+appnNodeCounterDisconTime OBJECT-TYPE
+      SYNTAX TimeStamp
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the sysUpTime object the last time the APPN node
+          was reinitialized."
+      ::= { appnGeneralInfoAndCaps 16 }
+
+appnNodeLsCounterType OBJECT-TYPE
+      SYNTAX INTEGER {
+                 other(1),
+                 noAnr(2),
+                 anrForLocalNces(3),
+                 allAnr(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates which ANR traffic, if any, the node includes in the
+          counts returned by the APPN link station counters
+          appnLsInXidBytes, appnLsInMsgBytes, appnLsInXidFrames,
+          appnLsInMsgFrames, appnLsOutXidBytes, appnLsOutMsgBytes,
+          appnLsOutXidFrames, and appnLsOutMsgFrames.  These counters
+          are always incremented for ISR traffic.
+
+          The following values are defined:
+
+             other(1)             - the node does something different
+                                    from all the options listed below
+             noAnr(2)             - the node does not include any ANR
+                                    traffic in these counts
+             anrForLocalNces(3)   - the node includes in these counts
+                                    ANR traffic for RTP connections
+                                    that terminate in this node, but
+                                    not ANR traffic for RTP connections
+                                    that pass through this node without
+                                    terminating in it
+             allAnr(4)            - the node includes all ANR traffic
+                                    in these counts."
+      ::= { appnGeneralInfoAndCaps 17 }
+
+appnNodeBrNn OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node is currently configured as a
+          branch network node.
+
+          Note:  throughout the remainder of this MIB module, branch
+          network node is treated as a third node type, parallel to
+          network node and end node.  This is not how branch network
+          nodes are treated in the base APPN architecture, but it
+
+          increases clarity to do it here."
+      ::= { appnGeneralInfoAndCaps 18 }
+
+-- *********************************************************************
+-- APPN Network Node Information
+-- This section provides global information about an APPN network node.
+-- *********************************************************************
+
+appnNodeNnCentralDirectory OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node supports central directory
+          services.
+
+          This object corresponds to cv4580, byte 8, bit 1."
+      ::= { appnNnUniqueInfoAndCaps 1 }
+
+appnNodeNnTreeCache OBJECT-TYPE
+      SYNTAX INTEGER {
+                     noCache(1),
+                     cacheNoIncrUpdate(2),
+                     cacheWithIncrUpdate(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates this node's level of support for caching of route
+          trees.  Three levels are specified:
+
+             noCache(1)             - caching of route trees is not
+                                      supported
+             cacheNoIncrUpdate(2)   - caching of route trees is
+                                      supported, but without incremental
+                                      updates
+             cacheWithIncrUpdate(3) - caching of route trees with
+                                      incremental updates is supported"
+      ::= { appnNnUniqueInfoAndCaps 2 }
+
+appnNodeNnRouteAddResist OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Route addition resistance.
+
+          This administratively assigned value indicates the relative
+          desirability of using this node for intermediate session
+          traffic.  The value, which can be any integer 0-255, is used
+          in route computation.  The lower the value, the more
+          desirable the node is for intermediate routing.
+
+          This object corresponds to cv4580, byte 6."
+      ::= { appnNnUniqueInfoAndCaps 3 }
+
+appnNodeNnIsr OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node supports intermediate session
+          routing.
+
+          This object corresponds to cv4580, byte 8, bit 2."
+      ::= { appnNnUniqueInfoAndCaps 4 }
+
+appnNodeNnFrsn OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The last flow-reduction sequence number (FRSN) sent by this
+          node in a topology update to an adjacent network node."
+      ::= { appnNnUniqueInfoAndCaps 5 }
+
+appnNodeNnPeriBorderSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node has peripheral border node
+          support.
+
+          This object corresponds to cv4580, byte 9, bit 0."
+      ::= { appnNnUniqueInfoAndCaps 6 }
+
+appnNodeNnInterchangeSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node has interchange node support.
+
+          This object corresponds to cv4580, byte 9, bit 1."
+      ::= { appnNnUniqueInfoAndCaps 7 }
+
+appnNodeNnExteBorderSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node has extended border node support.
+
+          This object corresponds to cv4580, byte 9, bit 2."
+      ::= { appnNnUniqueInfoAndCaps 8 }
+
+appnNodeNnSafeStoreFreq OBJECT-TYPE
+      SYNTAX INTEGER (0..32767)
+      UNITS "TDUs"
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "The topology safe store frequency.
+
+          If this number is not zero, then the topology database is saved
+          each time the total number of topology database updates (TDUs)
+          received by this node increases by this number.  A value of
+          zero indicates that the topology database is not being saved."
+      ::= { appnNnUniqueInfoAndCaps 9 }
+
+appnNodeNnRsn OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Resource sequence number for this node, which it assigns and
+          controls.
+
+          This object corresponds to the numeric value in cv4580, bytes
+          2-5."
+      ::= { appnNnUniqueInfoAndCaps 10 }
+
+appnNodeNnCongested OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node is congested.  Other network nodes
+          stop routing traffic to this node while this flag is on.
+
+          This object corresponds to cv4580, byte 7, bit 0."
+      ::= { appnNnUniqueInfoAndCaps 11 }
+
+appnNodeNnIsrDepleted OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicate whether intermediated session routing resources are
+          depleted.  Other network nodes stop routing traffic through
+          this node while this flag is on.
+
+          This object corresponds to cv4580, byte 7, bit 1."
+      ::= { appnNnUniqueInfoAndCaps 12 }
+
+appnNodeNnQuiescing OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node is quiescing.
+
+          This object corresponds to cv4580, byte 7, bit 5."
+      ::= { appnNnUniqueInfoAndCaps 13 }
+
+appnNodeNnGateway OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node has gateway services support.
+
+          This object corresponds to cv4580, byte 8, bit 0."
+      ::= { appnNnUniqueInfoAndCaps 14 }
+
+-- *********************************************************************
+
+-- APPN End Node Information
+-- This section provides global information about an APPN end node.  Two
+-- of the objects are also implemented by a branch network node.
+-- *********************************************************************
+
+appnNodeEnModeCosMap OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this end node supports mode name to COS name
+          mapping."
+      ::= { appnEnUniqueCaps 1 }
+
+appnNodeEnNnServer OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The fully qualified name of the current NN server for this end
+          node.  An NN server is identified using the format specified in
+          the SnaControlPointName textual convention.  The value is a
+          zero-length string when there is no active NN server.
+
+          A branch network node shall also implement this object."
+      ::= { appnEnUniqueCaps 2 }
+
+appnNodeEnLuSearch OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node is to be searched for LUs as part
+          of a network broadcast search.
+
+          A branch network node shall also implement this object."
+      ::= { appnEnUniqueCaps 3 }
+
+-- *********************************************************************
+-- APPN Port information
+-- This section provides information about an APPN node's ports.
+-- *********************************************************************
+
+appnPortTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnPortEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The Port table describes the configuration and current status
+          of the ports used by APPN.  When it is known to the APPN
+          component, an OBJECT IDENTIFIER pointing to additional
+          information related to the port is included.  This may, but
+          need not, be a RowPointer to an ifTable entry for a DLC
+          interface immediately 'below' the port."
+      ::= { appnPortInformation 1 }
+
+appnPortEntry OBJECT-TYPE
+      SYNTAX AppnPortEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The port name is used as the index to this table."
+      INDEX
+             { appnPortName }
+      ::= { appnPortTable 1 }
+
+AppnPortEntry ::= SEQUENCE {
+      appnPortName                 DisplayString,
+      appnPortCommand              INTEGER,
+      appnPortOperState            INTEGER,
+      appnPortDlcType              IANAifType,
+      appnPortPortType             INTEGER,
+      appnPortSIMRIM               TruthValue,
+      appnPortLsRole               INTEGER,
+      appnPortNegotLs              TruthValue,
+      appnPortDynamicLinkSupport   TruthValue,
+      appnPortMaxRcvBtuSize        INTEGER,
+      appnPortMaxIframeWindow      Gauge32,
+      appnPortDefLsGoodXids        AppnPortCounter,
+      appnPortDefLsBadXids         AppnPortCounter,
+      appnPortDynLsGoodXids        AppnPortCounter,
+      appnPortDynLsBadXids         AppnPortCounter,
+      appnPortSpecific             RowPointer,
+      appnPortDlcLocalAddr         DisplayableDlcAddress,
+      appnPortCounterDisconTime    TimeStamp
+                     }
+
+appnPortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this APPN port."
+      ::= { appnPortEntry 1 }
+
+appnPortCommand OBJECT-TYPE
+      SYNTAX INTEGER {
+                      deactivate(1),
+                      activate(2),
+                      recycle(3),
+                      ready(4)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Object by which a Management Station can activate, deactivate,
+          or recycle (i.e., cause to be deactivated and then immediately
+          activated) a port, by setting the value to activate(1),
+          deactivate(2), or recycle(3), respectively.  The value ready(4)
+          is returned on GET operations until a SET has been processed;
+          after that the value received on the most recent SET is
+          returned."
+      ::= { appnPortEntry 2 }
+
+appnPortOperState OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the current state of this port:
+
+              inactive(1)   - port is inactive
+              pendactive(2) - port is pending active
+              active(3)     - port is active
+              pendinact(4)  - port is pending inactive"
+      ::= { appnPortEntry 3 }
+
+appnPortDlcType OBJECT-TYPE
+      SYNTAX IANAifType
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of DLC interface, distinguished according to the
+          protocol immediately 'below' this layer."
+      ::= { appnPortEntry 4 }
+
+appnPortPortType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     leased(1),
+                     switched(2),
+                     sharedAccessFacilities(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Identifies the type of line used by this port:
+
+              leased(1)                 - leased line
+              switched(2)               - switched line
+              sharedAccessFacilities(3) - shared access facility, such
+                                          as a LAN."
+      ::= { appnPortEntry 5 }
+
+appnPortSIMRIM OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether Set Initialization Mode (SIM) and Receive
+          Initialization Mode (RIM) are supported for this port."
+      ::= { appnPortEntry 6 }
+
+appnPortLsRole OBJECT-TYPE
+      SYNTAX INTEGER {
+                     primary(1),
+                     secondary(2),
+                     negotiable(3),
+                     abm(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "Initial role for link stations activated through this port.
+             The values map to the following settings in the initial XID,
+             where 'ABM' indicates asynchronous balanced mode and 'NRM'
+             indicated normal response mode:
+
+                 primary(1):     ABM support = 0     ( = NRM)
+                                 role = 01           ( = primary)
+                 secondary(2):   ABM support = 0     ( = NRM)
+                                 role = 00           ( = secondary)
+                 negotiable(3):  ABM support = 0     ( = NRM)
+                                 role = 11           ( = negotiable)
+                 abm(4):         ABM support = 1     ( = ABM)
+                                 role = 11           ( = negotiable)"
+      ::= { appnPortEntry 7 }
+
+appnPortNegotLs OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node supports negotiable link stations
+          for this port."
+      ::= { appnPortEntry 8 }
+
+appnPortDynamicLinkSupport OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node allows call-in on this port from
+          nodes not defined locally."
+      ::= { appnPortEntry 9 }
+
+appnPortMaxRcvBtuSize OBJECT-TYPE
+      SYNTAX INTEGER (99..32767)
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum Basic Transmission Unit (BTU) size that a link station
+          on this port can receive.
+
+          This object corresponds to bytes 21-22 of XID3."
+      ::= { appnPortEntry 10 }
+
+appnPortMaxIframeWindow OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "I-frames"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum number of I-frames that can be received by the XID
+          sender before an acknowledgement is received."
+      ::= { appnPortEntry 11 }
+
+appnPortDefLsGoodXids OBJECT-TYPE
+      SYNTAX AppnPortCounter
+      UNITS "XID exchanges"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of successful XID exchanges that have
+          occurred on all defined link stations on this port since the
+          last time this port was started."
+      ::= { appnPortEntry 12 }
+
+appnPortDefLsBadXids OBJECT-TYPE
+      SYNTAX AppnPortCounter
+      UNITS "XID exchanges"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of unsuccessful XID exchanges that have
+          occurred on all defined link stations on this port since the
+          last time this port was started."
+      ::= { appnPortEntry 13 }
+
+appnPortDynLsGoodXids OBJECT-TYPE
+      SYNTAX AppnPortCounter
+      UNITS "XID exchanges"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of successful XID exchanges that have
+          occurred on all dynamic link stations on this port since the
+          last time this port was started."
+      ::= { appnPortEntry 14 }
+
+appnPortDynLsBadXids OBJECT-TYPE
+      SYNTAX AppnPortCounter
+      UNITS "XID exchanges"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of unsuccessful XID exchanges that have
+          occurred on all dynamic link stations on this port since the
+          last time this port was started."
+      ::= { appnPortEntry 15 }
+
+appnPortSpecific OBJECT-TYPE
+      SYNTAX RowPointer
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Identifies the object, e.g., one in a DLC-specific MIB, that
+          can provide additional information related to this port.
+
+          If the agent is unable to identify such an object, the value
+          0.0 is returned."
+      ::= { appnPortEntry 16 }
+
+appnPortDlcLocalAddr OBJECT-TYPE
+      SYNTAX DisplayableDlcAddress
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Local DLC address of this port."
+      ::= { appnPortEntry 17 }
+
+appnPortCounterDisconTime OBJECT-TYPE
+      SYNTAX TimeStamp
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the sysUpTime object the last time the port was
+          started."
+      ::= { appnPortEntry 18 }
+
+-- *********************************************************************
+-- APPN Link Station Information
+-- This section provides information about an APPN node's link stations.
+-- *********************************************************************
+
+appnLsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnLsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains detailed information about the link
+          station configuration and its current status."
+      ::= { appnLinkStationInformation 1 }
+
+appnLsEntry OBJECT-TYPE
+      SYNTAX AppnLsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by the link station name."
+      INDEX
+             { appnLsName }
+      ::= { appnLsTable 1 }
+
+AppnLsEntry ::= SEQUENCE {
+      appnLsName                  DisplayString,
+      appnLsCommand               INTEGER,
+      appnLsOperState             INTEGER,
+      appnLsPortName              DisplayString,
+      appnLsDlcType               IANAifType,
+      appnLsDynamic               TruthValue,
+      appnLsAdjCpName             OCTET STRING,
+      appnLsAdjNodeType           INTEGER,
+      appnLsTgNum                 INTEGER,
+      appnLsLimResource           TruthValue,
+      appnLsActOnDemand           TruthValue,
+      appnLsMigration             TruthValue,
+      appnLsPartnerNodeId         SnaNodeIdentification,
+      appnLsCpCpSessionSupport    TruthValue,
+      appnLsMaxSendBtuSize        INTEGER,
+-- performance data
+      appnLsInXidBytes            AppnLinkStationCounter,
+      appnLsInMsgBytes            AppnLinkStationCounter,
+      appnLsInXidFrames           AppnLinkStationCounter,
+      appnLsInMsgFrames           AppnLinkStationCounter,
+      appnLsOutXidBytes           AppnLinkStationCounter,
+      appnLsOutMsgBytes           AppnLinkStationCounter,
+      appnLsOutXidFrames          AppnLinkStationCounter,
+      appnLsOutMsgFrames          AppnLinkStationCounter,
+-- propagation delay
+      appnLsEchoRsps              AppnLinkStationCounter,
+      appnLsCurrentDelay          Gauge32,
+      appnLsMaxDelay              Gauge32,
+      appnLsMinDelay              Gauge32,
+      appnLsMaxDelayTime          DateAndTime,
+-- XID Statistics
+      appnLsGoodXids              AppnLinkStationCounter,
+      appnLsBadXids               AppnLinkStationCounter,
+-- DLC-specific
+      appnLsSpecific              RowPointer,
+      appnLsActiveTime            Unsigned32,
+      appnLsCurrentStateTime      TimeTicks,
+-- HPR-specific
+      appnLsHprSup                INTEGER,
+      appnLsErrRecoSup            TruthValue,
+      appnLsForAnrLabel           OCTET STRING,
+      appnLsRevAnrLabel           OCTET STRING,
+      appnLsCpCpNceId             OCTET STRING,
+      appnLsRouteNceId            OCTET STRING,
+      appnLsBfNceId               OCTET STRING,
+      appnLsLocalAddr             DisplayableDlcAddress,
+      appnLsRemoteAddr            DisplayableDlcAddress,
+      appnLsRemoteLsName          DisplayString,
+      appnLsCounterDisconTime     TimeStamp,
+      appnLsMltgMember            TruthValue
+                     }
+
+appnLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the link station.
+           The name can be from one to ten characters."
+      ::= { appnLsEntry 1 }
+
+appnLsCommand OBJECT-TYPE
+      SYNTAX INTEGER {
+                      deactivate(1),
+                      activate(2),
+                      recycle(3),
+                      ready(4)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Object by which a Management Station can activate, deactivate,
+          or recycle (i.e., cause to be deactivated and then immediately
+          reactivated) a link station, by setting the value to
+          activate(1), deactivate(2), or recycle(3), respectively.  The
+          value ready(4) is returned on GET operations until a SET has
+          been processed; after that the value received on the most
+          recent SET is returned."
+      ::= { appnLsEntry 2 }
+
+appnLsOperState OBJECT-TYPE
+      SYNTAX INTEGER    {
+          inactive(1),
+          sentConnectOut(2),    -- pending active
+          pendXidExch(3),       -- pending active
+          sendActAs(4),         -- pending active
+          sendSetMode(5),       -- pending active
+          otherPendingActive(6),-- pending active
+          active(7),
+          sentDeactAsOrd(8),    -- pending inactive
+          sentDiscOrd(9),       -- pending inactive
+          sentDiscImmed(10),    -- pending inactive
+          otherPendingInact(11) -- pending inactive
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "State of this link station.  The comments map these more
+          granular states to the 'traditional' four states for SNA
+          resources.  Values (2) through (5) represent the normal
+          progression of states when a link station is being activated.
+          Value (6) represents some other state of a link station in
+          the process of being activated.  Values (8) through (10)
+          represent different ways a link station can be deactivated.
+          Value (11) represents some other state of a link station in
+          the process of being deactivated."
+      ::= { appnLsEntry 3 }
+
+appnLsPortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the port associated with
+
+          this link station.  The name can be from one to ten
+          characters."
+      ::= { appnLsEntry 4 }
+
+appnLsDlcType OBJECT-TYPE
+      SYNTAX IANAifType
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of DLC interface, distinguished according to the
+          protocol immediately 'below' this layer."
+      ::= { appnLsEntry 5 }
+
+appnLsDynamic OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Identifies whether this is a dynamic link station.  Dynamic
+          link stations are created when links that have not been locally
+          defined are established by adjacent nodes."
+      ::= { appnLsEntry 6 }
+
+appnLsAdjCpName OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified name of the adjacent node for this link
+          station.  An adjacent node is identified using the format
+          specified in the SnaControlPointName textual convention.
+
+          The value of this object is determined as follows:
+
+             1. If the adjacent node's name was received on XID, it
+                is returned.
+
+             2. If the adjacent node's name was not received on XID,
+                but a locally-defined value is available, it is
+                returned.
+
+             3. Otherwise a string of length 0 is returned, indicating
+                that no name is known for the adjacent node."
+      ::= { appnLsEntry 7 }
+
+appnLsAdjNodeType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networkNode(1),
+                     endNode(2),
+                     t21len(4),
+                     unknown(255)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Node type of the adjacent node on this link:
+
+                networkNode(1) - APPN network node
+                endNode(2)     - APPN end node
+                t21len(4)      - LEN end node
+                unknown(255)   - the agent does not know the node type
+                                 of the adjacent node
+          "
+      ::= { appnLsEntry 8 }
+
+appnLsTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..256)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number associated with the TG to this link station, with a
+          range from 0 to 256.  A value of 256 indicates that the TG
+          number has not been negotiated and is unknown at this time."
+      ::= { appnLsEntry 9 }
+
+appnLsLimResource OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the link station is a limited resource.  A
+          link station that is a limited resource is deactivated when it
+          is no longer in use."
+      ::= { appnLsEntry 10 }
+
+appnLsActOnDemand OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the link station is activatable on demand.
+
+          Such a link station is reported in the topology as active
+          regardless of its actual state, so that it can be considered in
+          route calculations.  If the link station is inactive and is
+          chosen for a route, it will be activated at that time."
+      ::= { appnLsEntry 11 }
+
+appnLsMigration OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this link station will be used for
+          connections to down-level or migration partners.
+
+          In general, migration nodes do not append their CP names on
+          XID3.  Such nodes:  (1) will not support parallel TGs, (2)
+          should be sent an ACTIVATE PHYSICAL UNIT (ACTPU), provided that
+          the partner supports ACTPUs, and (3) should not be sent
+          segmented BINDs.  However, if this node receives an XID3 with
+          an appended CP name, then the partner node will not be treated
+          as a migration node.
+
+           In the case of DYNAMIC TGs this object should be set to 'no'."
+      ::= { appnLsEntry 12 }
+
+appnLsPartnerNodeId OBJECT-TYPE
+      SYNTAX SnaNodeIdentification
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The partner's Node Identification, from bytes 2-5 of the XID
+          received from the partner.  If this value is not available,
+          then the characters '00000000' are returned."
+      ::= { appnLsEntry 13 }
+
+appnLsCpCpSessionSupport OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether CP-CP sessions are supported by this
+          link station.  For a dynamic link, this object represents
+          the default ('Admin') value."
+      ::= { appnLsEntry 14 }
+
+appnLsMaxSendBtuSize OBJECT-TYPE
+      SYNTAX INTEGER (99..32767)
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Numeric value between 99 and 32767 inclusive indicating the
+          maximum number of bytes in a Basic Transmission Unit (BTU) sent
+          on this link.
+
+          When the link state (returned by the appnLsOperState object) is
+          inactive or pending active, the value configured at this node
+          is returned.  When the link state is active, the value that was
+          negotiated for it is returned.  This negotiated value is the
+          smaller of the value configured at this node and the partner's
+          maximum receive BTU length, received in XID."
+      ::= { appnLsEntry 15 }
+
+appnLsInXidBytes OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of XID bytes received.  All of the bytes in the SNA
+          basic transmission unit (BTU), i.e., all of the bytes in the
+          DLC XID Information Field, are counted."
+      ::= { appnLsEntry 16 }
+
+appnLsInMsgBytes OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of message (I-frame) bytes received.  All of the bytes
+          in the SNA basic transmission unit (BTU), including the
+          transmission header (TH), are counted."
+      ::= { appnLsEntry 17 }
+
+appnLsInXidFrames OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "XID frames"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of XID frames received."
+      ::= { appnLsEntry 18 }
+
+appnLsInMsgFrames OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "I-frames"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of message (I-frame) frames received."
+      ::= { appnLsEntry 19 }
+
+appnLsOutXidBytes OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of XID bytes sent.  All of the bytes in the SNA basic
+          transmission unit (BTU), i.e., all of the bytes in the DLC XID
+          Information Field, are counted."
+      ::= { appnLsEntry 20 }
+
+appnLsOutMsgBytes OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of message (I-frame) bytes sent.  All of the bytes
+          in the SNA basic transmission unit (BTU), including the
+          transmission header (TH), are counted."
+      ::= { appnLsEntry 21 }
+
+appnLsOutXidFrames OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "XID frames"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of XID frames sent."
+      ::= { appnLsEntry 22 }
+
+appnLsOutMsgFrames OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "I-frames"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of message (I-frame) frames sent."
+      ::= { appnLsEntry 23 }
+
+appnLsEchoRsps OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "echo responses"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of echo responses returned from adjacent link station.
+          A response should be returned for each test frame sent by this
+          node.  Test frames are sent to adjacent nodes periodically to
+          verify connectivity and to measure the actual round trip time,
+          that is, the time interval from when the test frame is sent
+          until when the response is received."
+      ::= { appnLsEntry 24 }
+
+appnLsCurrentDelay OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "milliseconds"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time that it took for the last test signal to be sent and
+          returned from this link station to the adjacent link station.
+          This time is represented in milliseconds."
+      ::= { appnLsEntry 25 }
+
+appnLsMaxDelay OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "milliseconds"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The longest time it took for a test signal to be sent and
+          returned from this link station to the adjacent link station.
+
+          This time is represented in milliseconds .
+
+          The value 0 is returned if no test signal has been sent and
+          returned."
+      ::= { appnLsEntry 26 }
+
+appnLsMinDelay OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "milliseconds"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The shortest time it took for a test signal to be sent and
+          returned from this link station to the adjacent link station.
+          This time is represented in milliseconds.
+
+          The value 0 is returned if no test signal has been sent and
+          returned."
+      ::= { appnLsEntry 27 }
+
+appnLsMaxDelayTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time when the longest delay occurred.  This time can be
+          used to identify when this high water mark occurred in relation
+          to other events in the APPN node, for example, the time at
+          which an APPC session was either terminated or failed to be
+          established.  This latter time is available in the
+          appcHistSessTime object in the APPC MIB.
+
+          The value 00000000 is returned if no test signal has been sent
+          and returned."
+      ::= { appnLsEntry 28 }
+
+appnLsGoodXids OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "XID exchanges"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of successful XID exchanges that have
+          occurred on this link station since the time it was started."
+      ::= { appnLsEntry 29 }
+
+appnLsBadXids OBJECT-TYPE
+      SYNTAX AppnLinkStationCounter
+      UNITS "XID exchanges"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The total number of unsuccessful XID exchanges that have
+          occurred on this link station since the time it was started."
+      ::= { appnLsEntry 30 }
+
+appnLsSpecific OBJECT-TYPE
+      SYNTAX RowPointer
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Identifies the object, e.g., one in a DLC-specific MIB, that
+          can provide additional information related to this link
+          station.
+
+          If the agent is unable to identify such an object, the value
+          0.0 is returned."
+      ::= { appnLsEntry 31 }
+
+appnLsActiveTime OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The cumulative amount of time since the node was last
+          reinitialized, measured in hundredths of a second, that this
+          link station has been in the active state.  A zero value
+          indicates that the link station has never been active since
+          the node was last reinitialized."
+      ::= { appnLsEntry 32 }
+
+appnLsCurrentStateTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The amount of time, measured in hundredths of a second, that
+
+          the link station has been in its current state."
+      ::= { appnLsEntry 33 }
+
+appnLsHprSup OBJECT-TYPE
+      SYNTAX INTEGER {
+                 noHprSupport(1),
+                 hprBaseOnly(2),
+                 rtpTower(3),
+                 controlFlowsOverRtpTower(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the level of high performance routing (HPR) support
+          over this link:
+
+             noHprSupport(1)             - no HPR support
+             hprBaseOnly(2)              - HPR base (option set 1400)
+                                           supported
+             rtpTower(3)                 - HPR base and RTP tower
+                                           (option set 1401) supported
+             controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+                                           control flows over RTP
+                                           (option set 1402) supported
+
+          If the link is not active, the defined value is returned."
+      ::= { appnLsEntry 34 }
+
+appnLsErrRecoSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the link station is supporting
+           HPR link-level error recovery."
+      ::= { appnLsEntry 35 }
+
+appnLsForAnrLabel OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The forward Automatic Network Routing (ANR) label for this
+          link station.  If the link does not support HPR or the value is
+          unknown, a zero-length string is returned."
+      ::= { appnLsEntry 36 }
+
+appnLsRevAnrLabel OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The reverse Automatic Network Routing (ANR) label for this
+          link station.  If the link does not support HPR or the value is
+          unknown, a zero-length string is returned."
+      ::= { appnLsEntry 37 }
+
+appnLsCpCpNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network connection endpoint identifier (NCE ID) for CP-CP
+          sessions if this node supports the HPR transport tower, a
+          zero-length string if the value is unknown or not meaningful
+          for this node."
+      ::= { appnLsEntry 38 }
+
+appnLsRouteNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network connection endpoint identifier (NCE ID) for Route
+          Setup if this node supports the HPR transport tower, a zero-
+          length string if the value is unknown or not meaningful for
+          this node."
+      ::= { appnLsEntry 39 }
+
+appnLsBfNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The network connection endpoint identifier (NCE ID) for the
+          APPN/HPR boundary function if this node supports the HPR
+          transport tower, a zero-length string if the value is unknown
+          or not meaningful for this node."
+      ::= { appnLsEntry 40 }
+
+appnLsLocalAddr OBJECT-TYPE
+      SYNTAX DisplayableDlcAddress
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Local address of this link station."
+      ::= { appnLsEntry 41 }
+
+appnLsRemoteAddr OBJECT-TYPE
+      SYNTAX DisplayableDlcAddress
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Address of the remote link station on this link."
+      ::= { appnLsEntry 42 }
+
+appnLsRemoteLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Remote link station discovered from the XID exchange.
+          The name can be from one to ten characters.  A zero-length
+          string indicates that the value is not known."
+      ::= { appnLsEntry 43 }
+
+appnLsCounterDisconTime OBJECT-TYPE
+      SYNTAX TimeStamp
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the sysUpTime object the last time the link
+          station was started."
+      ::= { appnLsEntry 44 }
+
+appnLsMltgMember OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the link is a member of a multi-link TG.  If
+          the link's TG has been brought up as a multi-link TG, then the
+          link is reported as a member of a multi-link TG, even if it is
+
+          currently the only active link in the TG."
+      ::= { appnLsEntry 45 }
+
+--********************************************************************
+-- This table provides information about errors this node encountered
+-- with connections to adjacent nodes.  Entries are added for exceptional
+-- conditions encountered establishing connections, and for exceptional
+-- conditions that resulted in termination of a connection.  It is an
+-- implementation option when entries are removed from this table.
+--********************************************************************
+
+appnLsStatusTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnLsStatusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains information related to exceptional and
+          potentially exceptional conditions that occurred during the
+          activation, XID exchange, and termination of a connection.  No
+          entries are created when these activities proceed normally.
+
+          It is an implementation option when entries are removed from
+          this table."
+      ::= { appnLinkStationInformation 2 }
+
+appnLsStatusEntry OBJECT-TYPE
+      SYNTAX AppnLsStatusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by the LsStatusIndex, which is an
+          integer that is continuously updated until it eventually
+          wraps."
+      INDEX
+             { appnLsStatusIndex }
+      ::= { appnLsStatusTable 1 }
+
+AppnLsStatusEntry ::= SEQUENCE {
+      appnLsStatusIndex              INTEGER,
+      appnLsStatusTime               DateAndTime,
+      appnLsStatusLsName             DisplayString,
+      appnLsStatusCpName             DisplayString,
+      appnLsStatusPartnerId          SnaNodeIdentification,
+      appnLsStatusTgNum              INTEGER,
+      appnLsStatusGeneralSense       SnaSenseData,
+      appnLsStatusRetry              TruthValue,
+      appnLsStatusEndSense           SnaSenseData,
+      appnLsStatusXidLocalSense      SnaSenseData,
+      appnLsStatusXidRemoteSense     SnaSenseData,
+      appnLsStatusXidByteInError     INTEGER,
+      appnLsStatusXidBitInError      INTEGER,
+      appnLsStatusDlcType            IANAifType,
+      appnLsStatusLocalAddr          DisplayableDlcAddress,
+      appnLsStatusRemoteAddr         DisplayableDlcAddress
+                     }
+
+appnLsStatusIndex OBJECT-TYPE
+      SYNTAX INTEGER (0..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table index.  The value of the index begins at zero
+           and is incremented up to a maximum value of 2**31-1
+           (2,147,483,647) before wrapping."
+      ::= { appnLsStatusEntry 1 }
+
+appnLsStatusTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Time when the exception condition occurred.  This time can be
+          used to identify when this event occurred in relation to other
+          events in the APPN node, for example, the time at which an APPC
+          session was either terminated or failed to be established.
+          This latter time is available in the appcHistSessTime object in
+          the APPC MIB."
+      ::= { appnLsStatusEntry 2 }
+
+appnLsStatusLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the link station
+          experiencing the condition."
+      ::= { appnLsStatusEntry 3 }
+
+appnLsStatusCpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified name of the adjacent node for this link
+          station.  An adjacent node is identified using the format
+          specified in the SnaControlPointName textual convention.
+
+          The value of this object is determined as follows:
+
+             1. If the adjacent node's name was received on XID, it
+                is returned.
+
+             2. If the adjacent node's name was not received on XID,
+                but a locally-defined value is available, it is
+                returned.
+
+             3. Otherwise a string of length 0 is returned, indicating
+                that no name is known for the adjacent node."
+      ::= { appnLsStatusEntry 4 }
+
+appnLsStatusPartnerId OBJECT-TYPE
+      SYNTAX SnaNodeIdentification
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The partner's Node Identification, from bytes 2-5 of the XID
+          received from the partner.  If this value is not available,
+          then the characters '00000000' are returned."
+      ::= { appnLsStatusEntry 5 }
+
+appnLsStatusTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..256)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number associated with the TG to this link station, with a
+          range from 0 to 256.  A value of 256 indicates that the TG
+          number was unknown at the time of the failure."
+      ::= { appnLsStatusEntry 6 }
+
+appnLsStatusGeneralSense OBJECT-TYPE
+      SYNTAX SnaSenseData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The error sense data associated with the start sequence of
+          activation of a link up to the beginning of the XID sequence.
+
+          This is the sense data that came from Configuration Services
+          whenever the link did not activate or when it went inactive."
+      ::= { appnLsStatusEntry 7 }
+
+appnLsStatusRetry OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node will retry the start request to
+          activate the link."
+      ::= { appnLsStatusEntry 8 }
+
+appnLsStatusEndSense OBJECT-TYPE
+      SYNTAX SnaSenseData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The sense data associated with the termination of the link
+          connection to adjacent node.
+
+          This is the sense data that came from the DLC layer."
+      ::= { appnLsStatusEntry 9 }
+
+appnLsStatusXidLocalSense OBJECT-TYPE
+      SYNTAX SnaSenseData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The sense data associated with the rejection of the XID.
+
+          This is the sense data that came from the local node (this
+          node) when it built the XID Negotiation Error control vector
+          (cv22) to send to the remote node."
+      ::= { appnLsStatusEntry 10 }
+
+appnLsStatusXidRemoteSense OBJECT-TYPE
+      SYNTAX SnaSenseData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The sense data the adjacent node returned to this node
+          indicating the reason the XID was rejected.
+
+          This is the sense data that came from the remote node in the
+          XID Negotiation Error control vector (cv22) it sent to the
+          local node (this node)."
+      ::= { appnLsStatusEntry 11 }
+
+appnLsStatusXidByteInError OBJECT-TYPE
+      SYNTAX INTEGER (0..65536)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object identifies the actual byte in the XID that caused
+          the error.  The value 65536 indicates that the object has no
+          meaning.
+
+          For values in the range 0-65535, this object corresponds to
+          bytes 2-3 of the XID Negotiation (X'22') control vector."
+      ::= { appnLsStatusEntry 12 }
+
+appnLsStatusXidBitInError OBJECT-TYPE
+      SYNTAX INTEGER (0..8)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object identifies the actual bit in error (0 through 7)
+          within the errored byte of the XID.  The value 8 indicates that
+          this object has no meaning.
+
+          For values in the range 0-7, this object corresponds to byte 4
+          of the XID Negotiation (X'22') control vector."
+      ::= { appnLsStatusEntry 13 }
+
+appnLsStatusDlcType OBJECT-TYPE
+      SYNTAX IANAifType
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of DLC interface, distinguished according to the
+          protocol immediately 'below' this layer."
+      ::= { appnLsStatusEntry 14 }
+
+appnLsStatusLocalAddr OBJECT-TYPE
+      SYNTAX DisplayableDlcAddress
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Local address of this link station."
+      ::= { appnLsStatusEntry 15 }
+
+appnLsStatusRemoteAddr OBJECT-TYPE
+      SYNTAX DisplayableDlcAddress
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Address of the remote link station on this link."
+      ::= { appnLsStatusEntry 16 }
+
+-- *********************************************************************
+-- APPN Virtual Routing Node Information
+-- This section provides information relating a virtual routing node to
+-- an APPN port.
+-- *********************************************************************
+
+appnVrnTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnVrnEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table relates a virtual routing node to an APPN port."
+      ::= { appnVrnInfo 1 }
+
+appnVrnEntry OBJECT-TYPE
+      SYNTAX AppnVrnEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by the virtual routing node name, TG
+          number, and port name.  There will be a matching entry in the
+          appnLocalTgTable to represent status and characteristics of the
+          TG representing each virtual routing node definition."
+      INDEX
+             { appnVrnName, appnVrnTgNum, appnVrnPortName }
+      ::= { appnVrnTable 1 }
+
+AppnVrnEntry ::= SEQUENCE {
+      appnVrnName             SnaControlPointName,
+      appnVrnTgNum            INTEGER,
+      appnVrnPortName         DisplayString
+}
+
+appnVrnName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name of the virtual routing node.
+          This is a fully qualified name, and matches the appnLocalTgDest
+          name in the appnLocalTgTable."
+      ::= { appnVrnEntry 1 }
+
+appnVrnTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Number associated with the transmission group representing
+          this virtual routing node definition."
+      ::= { appnVrnEntry 2 }
+
+appnVrnPortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The name of the port this virtual routing node definition is
+          defined to."
+      ::= { appnVrnEntry 3 }
+
+-- ************** The APPN Topology Group ******************************
+
+appnNn                OBJECT IDENTIFIER ::= { appnObjects 2 }
+appnNnTopo         OBJECT IDENTIFIER ::= { appnNn 1 }
+appnNnTopology     OBJECT IDENTIFIER ::= { appnNn 2 }
+
+-- This group is used to represent the entire APPN network-node topology
+-- including network nodes, virtual routing nodes and all TGs associated
+-- with these nodes, including intersubnetwork TGs (ISTGs) and branch TGs.
+
+--
+-- Network nodes
+-- The APPN topology database consists of information about every APPN
+-- network node in this network node's topology subnetwork.  This
+-- information is learned over time as each network node exchanges
+-- topology information with the network nodes adjacent to it.  The
+-- database consists of information about each node, and information
+-- about all of the transmission groups used by these nodes.
+--
+-- Virtual routing nodes
+-- Information about virtual routing nodes (representing connection
+-- networks) is treated in the same way as information about network
+-- nodes, and is replicated at each network node.  The FRSN, node name,
+-- and node type are the only meaningful fields for a virtual routing
+-- node.  The other node objects return unspecified values.  Each
+-- node that has defined a TG with this virtual routing node as the
+-- destination also defines a TG on this virtual routing node.  There
+-- is a TG record for each node that uses this virtual routing node.
+--
+-- The APPN node table represents node information from the APPN topology
+-- database, with the FRSN and APPN fully qualified CP name serving as
+-- the index.  The FRSN is the agent's relative time stamp of an update
+-- to the network topology database.  After collecting the entire database
+-- once, a management application can issue GET NEXT commands starting
+-- from the last rows it has retrieved from the appnNnTopologyFRTable and
+-- from the appnNnTgTopologyFRTable.  When the response to either of these
+-- GET NEXT commands returns another row of its respective table, this
+-- indicates a change to the agent's topology database.  The management
+-- application can then retrieve only the updates to the table, using
+-- GET NEXT commands starting from the last retrieved node or TG entry.
+--
+-- The format of the actual APPN topology database is as follows:
+--
+-- Node table (entry for each node in network)
+--   TG table (entry for each TG owned by node)
+--
+-- Due to SNMP's ASN.1 limitations, we cannot represent the TG table
+-- within the node table in this way.  We define separate tables for
+-- nodes and TGs, adding the node name to each TG entry to provide a
+-- means of correlating the TG with its originating node.
+
+appnNnTopoMaxNodes OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "node entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum number of node entries allowed in the APPN topology
+
+          database.  It is an implementation choice whether to count only
+          network-node entries, or to count all node entries.  If the
+          number of node entries exceeds this value, APPN will issue an
+          Alert and the node can no longer participate as a network node.
+          The value 0 indicates that the local node has no defined limit,
+          and the number of node entries is bounded only by memory."
+      ::= { appnNnTopo 1 }
+
+appnNnTopoCurNumNodes OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "node entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Current number of node entries in this node's topology
+          database.  It is an implementation choice whether to count only
+          network-node entries, or to count all node entries, but an
+          implementation must make the same choice here that it makes for
+          the appnNnTopoMaxNodes object.  If this value exceeds the
+          maximum number of nodes allowed (appnNnTopoMaxNodes, if that
+          field in not 0), APPN Alert CPDB002 is issued."
+      ::= { appnNnTopo 2 }
+
+appnNnTopoNodePurges OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "node entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Total number of topology node records purged from this node's
+          topology database since the node was last reinitialized."
+      ::= { appnNnTopo 3 }
+
+appnNnTopoTgPurges OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "TG entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Total number of topology TG records purged from this node's
+          topology database since the node was last reinitialized."
+      ::= { appnNnTopo 4 }
+
+appnNnTopoTotalTduWars OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "TDU wars"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of TDU wars detected by this node since its last
+          initialization."
+      ::= { appnNnTopo 5 }
+
+-- APPN network node topology table (using FRSN and name as index)
+
+-- This table describes every APPN network node and virtual routing node
+-- represented in this node's topology database.
+
+appnNnTopologyFRTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnNnTopologyFREntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Portion of the APPN topology database that describes all of
+          the APPN network nodes and virtual routing nodes known to this
+          node."
+      ::= { appnNnTopology 3 }
+
+appnNnTopologyFREntry OBJECT-TYPE
+      SYNTAX AppnNnTopologyFREntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The FRSN and the fully qualified node name are used to index
+          this table."
+      INDEX
+             {appnNnNodeFRFrsn,
+              appnNnNodeFRName}
+      ::= { appnNnTopologyFRTable 1 }
+
+AppnNnTopologyFREntry ::= SEQUENCE {
+      appnNnNodeFRFrsn                     Unsigned32,
+      appnNnNodeFRName                     SnaControlPointName,
+      appnNnNodeFREntryTimeLeft            AppnTopologyEntryTimeLeft,
+      appnNnNodeFRType                     INTEGER,
+      appnNnNodeFRRsn                      Unsigned32,
+      appnNnNodeFRRouteAddResist           INTEGER,
+      appnNnNodeFRCongested                TruthValue,
+      appnNnNodeFRIsrDepleted              TruthValue,
+      appnNnNodeFRQuiescing                TruthValue,
+      appnNnNodeFRGateway                  TruthValue,
+      appnNnNodeFRCentralDirectory         TruthValue,
+      appnNnNodeFRIsr                      TruthValue,
+      appnNnNodeFRGarbageCollect           TruthValue,
+      appnNnNodeFRHprSupport               INTEGER,
+      appnNnNodeFRPeriBorderSup            TruthValue,
+      appnNnNodeFRInterchangeSup           TruthValue,
+      appnNnNodeFRExteBorderSup            TruthValue,
+      appnNnNodeFRBranchAwareness          TruthValue
+}
+
+appnNnNodeFRFrsn OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated with
+          Topology Database Updates (TDUs) and are unique only within
+          each APPN network node.  A TDU can be associated with multiple
+          APPN resources.  This FRSN indicates the last relative time
+          this resource was updated at the agent node."
+      ::= { appnNnTopologyFREntry 1 }
+
+appnNnNodeFRName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned network name that is locally defined
+          at each network node."
+      ::= { appnNnTopologyFREntry 2 }
+
+appnNnNodeFREntryTimeLeft OBJECT-TYPE
+      SYNTAX AppnTopologyEntryTimeLeft
+      UNITS "days"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of days before deletion of this network node entry."
+      ::= { appnNnTopologyFREntry 3 }
+
+appnNnNodeFRType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networkNode(1),
+                     virtualRoutingNode(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Type of APPN node."
+      ::= { appnNnTopologyFREntry 4 }
+
+appnNnNodeFRRsn OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Resource sequence number, which is assigned and controlled by
+          the network node that owns this resource.  An odd number
+          indicates that information about the resource is inconsistent.
+
+          This object corresponds to the numeric value in cv4580, bytes
+          2-5."
+      ::= { appnNnTopologyFREntry 5 }
+
+appnNnNodeFRRouteAddResist OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Route addition resistance.
+
+          This administratively assigned value indicates the relative
+          desirability of using this node for intermediate session
+          traffic.  The value, which can be any integer 0-255, is used
+          in route computation.  The lower the value, the more
+          desirable the node is for intermediate routing.
+
+          This object corresponds to cv4580, byte 6."
+      ::= { appnNnTopologyFREntry 6 }
+
+appnNnNodeFRCongested OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node is congested.  This node is not be
+          included in route selection by other nodes when this congestion
+          exists.
+
+          This object corresponds to cv4580, byte 7, bit 0."
+      ::= { appnNnTopologyFREntry 7 }
+
+appnNnNodeFRIsrDepleted OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether intermediate session routing resources are
+          depleted.  This node is not included in intermediate route
+          selection by other nodes when resources are depleted.
+
+          This object corresponds to cv4580, byte 7, bit 1."
+      ::= { appnNnTopologyFREntry 8 }
+
+appnNnNodeFRQuiescing OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node is quiescing.  This node is not
+          included in route selection by other nodes when the node is
+          quiescing.
+
+          This object corresponds to cv4580, byte 7, bit 5."
+      ::= { appnNnTopologyFREntry 9 }
+
+appnNnNodeFRGateway OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node provide gateway services.
+
+          This object corresponds to cv4580, byte 8, bit 0."
+      ::= { appnNnTopologyFREntry 10 }
+
+appnNnNodeFRCentralDirectory OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node supports central directory
+          services.
+
+          This object corresponds to cv4580, byte 8, bit 1."
+      ::= { appnNnTopologyFREntry 11 }
+
+appnNnNodeFRIsr OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node supports intermediate session
+          routing (ISR).
+
+          This object corresponds to cv4580, byte 8, bit 2."
+      ::= { appnNnTopologyFREntry 12 }
+
+appnNnNodeFRGarbageCollect OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the node has been marked for garbage
+          collection (deletion from the topology database) upon the next
+          garbage collection cycle.
+
+          This object corresponds to cv4580, byte 7, bit 3."
+      ::= { appnNnTopologyFREntry 13 }
+
+appnNnNodeFRHprSupport OBJECT-TYPE
+      SYNTAX INTEGER {
+                 noHprSupport(1),
+                 hprBaseOnly(2),
+                 rtpTower(3),
+                 controlFlowsOverRtpTower(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the node's level of support for high-performance
+          routing (HPR):
+
+             noHprSupport(1)             - no HPR support
+             hprBaseOnly(2)              - HPR base (option set 1400)
+                                           supported
+             rtpTower(3)                 - HPR base and RTP tower
+                                           (option set 1401) supported
+             controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+                                           control flows over RTP
+                                           (option set 1402) supported
+
+          This object corresponds to cv4580, byte 9, bits 3-4."
+      ::= { appnNnTopologyFREntry 14 }
+
+appnNnNodeFRPeriBorderSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node has peripheral border node
+          support.
+
+          This object corresponds to cv4580, byte 9, bit 0."
+      ::= { appnNnTopologyFREntry 15 }
+
+appnNnNodeFRInterchangeSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node has interchange node support.
+
+          This object corresponds to cv4580, byte 9, bit 1."
+      ::= { appnNnTopologyFREntry 16 }
+
+appnNnNodeFRExteBorderSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node has extended border node
+           support.
+
+          This object corresponds to cv4580, byte 9, bit 2."
+      ::= { appnNnTopologyFREntry 17 }
+
+appnNnNodeFRBranchAwareness OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether this node supports branch awareness.
+
+          This object corresponds to cv4580, byte 8, bit 4."
+      ::= { appnNnTopologyFREntry 18 }
+
+--APPN transmission group (TG) table
+
+-- This table describes the TGs associated with all the APPN network
+-- nodes known to this node.   The originating (owning) node for each
+-- TG is repeated here to provide a means of correlating the TGs with
+-- the nodes.
+
+appnNnTgTopologyFRTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnNnTgTopologyFREntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Portion of the APPN topology database that describes all of
+          the APPN transmissions groups between nodes in the database."
+      ::= { appnNnTopology 4 }
+
+appnNnTgTopologyFREntry OBJECT-TYPE
+      SYNTAX AppnNnTgTopologyFREntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by four columns:  FRSN, TG owner fully
+          qualified node name, TG destination fully qualified node name,
+          and TG number."
+      INDEX
+             {appnNnTgFRFrsn,
+              appnNnTgFROwner,
+              appnNnTgFRDest,
+              appnNnTgFRNum}
+      ::= { appnNnTgTopologyFRTable 1 }
+
+AppnNnTgTopologyFREntry ::= SEQUENCE {
+
+      appnNnTgFRFrsn           Unsigned32,
+      appnNnTgFROwner          SnaControlPointName,
+      appnNnTgFRDest           SnaControlPointName,
+      appnNnTgFRNum            INTEGER,
+      appnNnTgFREntryTimeLeft  AppnTopologyEntryTimeLeft,
+      appnNnTgFRDestVirtual    TruthValue,
+      appnNnTgFRDlcData        AppnTgDlcData,
+      appnNnTgFRRsn            Unsigned32,
+      appnNnTgFROperational    TruthValue,
+      appnNnTgFRQuiescing      TruthValue,
+      appnNnTgFRCpCpSession    INTEGER,
+      appnNnTgFREffCap         AppnTgEffectiveCapacity,
+      appnNnTgFRConnCost       INTEGER,
+      appnNnTgFRByteCost       INTEGER,
+      appnNnTgFRSecurity       AppnTgSecurity,
+      appnNnTgFRDelay          AppnTgDelay,
+      appnNnTgFRUsr1           INTEGER,
+      appnNnTgFRUsr2           INTEGER,
+      appnNnTgFRUsr3           INTEGER,
+      appnNnTgFRGarbageCollect TruthValue,
+      appnNnTgFRSubareaNum     Unsigned32,
+      appnNnTgFRHprSup         TruthValue,
+      appnNnTgFRDestHprTrans   TruthValue,
+      appnNnTgFRTypeIndicator  INTEGER,
+      appnNnTgFRIntersubnet    TruthValue,
+      appnNnTgFRMltgLinkType   TruthValue,
+      appnNnTgFRBranchTg       TruthValue
+}
+
+appnNnTgFRFrsn OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated with
+          Topology Database Updates (TDUs) and are unique only within
+          each APPN network node.  A TDU can be associated with multiple
+          APPN resources.  This FRSN indicates the last time this
+          resource was updated at this node."
+      ::= { appnNnTgTopologyFREntry 1 }
+
+appnNnTgFROwner OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the originating node for
+          this TG.  This is the same name specified in the node table."
+      ::= { appnNnTgTopologyFREntry 2 }
+
+appnNnTgFRDest OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned fully qualified network name for the
+          destination node for this TG."
+      ::= { appnNnTgTopologyFREntry 3 }
+
+appnNnTgFRNum OBJECT-TYPE
+      SYNTAX INTEGER  (0..255)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Number associated with this transmission group.  Range is
+          0-255."
+      ::= { appnNnTgTopologyFREntry 4 }
+
+appnNnTgFREntryTimeLeft OBJECT-TYPE
+      SYNTAX AppnTopologyEntryTimeLeft
+      UNITS "days"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of days before deletion of this network node TG entry
+          if it is not operational or has an odd (inconsistent) RSN."
+      ::= { appnNnTgTopologyFREntry 5 }
+
+appnNnTgFRDestVirtual OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the destination node is a virtual routing
+          node."
+      ::= { appnNnTgTopologyFREntry 6 }
+
+appnNnTgFRDlcData OBJECT-TYPE
+      SYNTAX AppnTgDlcData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "DLC-specific data related to a link connection network."
+      ::= { appnNnTgTopologyFREntry 7 }
+
+appnNnTgFRRsn OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Current owning node's resource sequence number for this
+          resource.  An odd number indicates that information about the
+          resource is inconsistent.
+
+          This object corresponds to the numeric value in cv47, bytes
+          2-5"
+      ::= { appnNnTgTopologyFREntry 8 }
+
+appnNnTgFROperational OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is operational.
+
+          This object corresponds to cv47, byte 6, bit 0."
+      ::= { appnNnTgTopologyFREntry 9 }
+
+appnNnTgFRQuiescing OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is quiescing.
+
+          If the TG owner is either an extended border node or a
+          branch-aware network node (indicated, respectively, by
+          the appnNnNodeFRExteBorderSup and appnNnNodeFRBranchAwareness
+          objects in the corresponding appnNnTopologyFREntry), then
+          this indicator is artificially set to TRUE in the APPN
+
+          topology database, to remove the TG from other nodes'
+          route calculations.  A management application can
+          determine whether the TG is actually quiescing by
+          examining its appnLocalTgQuiescing object at the TG owner.
+
+          This object corresponds to cv47, byte 6, bit 2."
+      ::= { appnNnTgTopologyFREntry 10 }
+
+appnNnTgFRCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {
+                     supportedUnknownStatus(1),
+                     supportedActive(2),
+                     notSupported(3),
+                     supportedNotActive(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether CP-CP sessions are supported on this TG, and
+          whether the TG owner's contention-winner session is active on
+          this TG.  Some nodes in the network are not able to
+          differentiate support and status of CP-CP sessions, and thus
+          may report the 'supportedUnknownStatus' value.
+
+          This object corresponds to cv47, byte 6, bits 3-4."
+      ::= { appnNnTgTopologyFREntry 11 }
+
+appnNnTgFREffCap OBJECT-TYPE
+      SYNTAX AppnTgEffectiveCapacity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Effective capacity for this TG."
+      ::= { appnNnTgTopologyFREntry 12 }
+
+appnNnTgFRConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Cost per connect time.
+
+          This is an administratively assigned value representing the
+          relative cost per unit of time to use this TG.  Range is from
+
+          0, which means no cost, to 255, which indicates maximum cost.
+
+          This object corresponds to cv47, byte 13."
+      ::= { appnNnTgTopologyFREntry 13 }
+
+appnNnTgFRByteCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Cost per byte transmitted.
+
+          This is an administratively assigned value representing the
+          relative cost of transmitting a byte over this TG.  Range is
+          from 0, which means no cost, to 255, which indicates maximum
+          cost.
+
+          This object corresponds to cv47, byte 14."
+      ::= { appnNnTgTopologyFREntry 14 }
+
+appnNnTgFRSecurity OBJECT-TYPE
+      SYNTAX AppnTgSecurity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned security level of this TG.
+
+          This object corresponds to cv47, byte 16."
+      ::= { appnNnTgTopologyFREntry 15 }
+
+appnNnTgFRDelay OBJECT-TYPE
+      SYNTAX AppnTgDelay
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned delay associated with this TG.
+
+          This object corresponds to cv47, byte 17."
+      ::= { appnNnTgTopologyFREntry 16 }
+
+appnNnTgFRUsr1 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "First user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG.
+
+          This object corresponds to cv47, byte 19."
+      ::= { appnNnTgTopologyFREntry 17 }
+
+appnNnTgFRUsr2 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Second user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG.
+
+          This object corresponds to cv47, byte 20."
+      ::= { appnNnTgTopologyFREntry 18 }
+
+appnNnTgFRUsr3 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Third user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG.
+
+          This object corresponds to cv47, byte 21."
+      ::= { appnNnTgTopologyFREntry 19 }
+
+appnNnTgFRGarbageCollect OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the TG has been marked for garbage
+          collection (deletion from the topology database) upon the next
+          garbage collection cycle.
+
+          This object corresponds to cv47, byte 6, bit 1."
+      ::= { appnNnTgTopologyFREntry 20 }
+
+appnNnTgFRSubareaNum OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The subarea number associated with this TG.
+
+          This object corresponds to cv4680, bytes m+2 through m+5."
+      ::= { appnNnTgTopologyFREntry 21 }
+
+appnNnTgFRHprSup OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether high performance routing (HPR)
+          is supported over this TG.
+
+          This object corresponds to cv4680, byte m+1, bit 2."
+      ::= { appnNnTgTopologyFREntry 22 }
+
+appnNnTgFRDestHprTrans OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the destination node supports
+          high performance routing (HPR) transport tower.
+
+          This object corresponds to cv4680, byte m+1, bit 7."
+      ::= { appnNnTgTopologyFREntry 23 }
+
+appnNnTgFRTypeIndicator OBJECT-TYPE
+      SYNTAX INTEGER {
+                      unknown(1),
+                      appnOrBfTg(2),
+                      interchangeTg(3),
+                      virtualRouteTg(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the type of the TG.
+
+          This object corresponds to cv4680, byte m+1, bits 3-4."
+      ::= { appnNnTgTopologyFREntry 24 }
+
+appnNnTgFRIntersubnet OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is an intersubnet TG,
+          which defines a border between subnetworks.
+
+          This object corresponds to cv4680, byte m+1, bit 5."
+      ::= { appnNnTgTopologyFREntry 25 }
+
+appnNnTgFRMltgLinkType OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object indicates whether the transmission group is a
+          multi-link TG.  A TG that has been brought up as a multi-link
+          TG is reported as one, even if it currently has only one link
+          active.
+
+          This object corresponds to cv47, byte 6, bit 5."
+      ::= { appnNnTgTopologyFREntry 26 }
+
+appnNnTgFRBranchTg OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is a branch TG
+          (equivalently, whether the destination of the transmission
+          group is a branch network node).
+
+          This object corresponds to cv4680, byte m+1, bit 1."
+      ::= { appnNnTgTopologyFREntry 27 }
+
+-- ************** The APPN Local Topology Group ************************
+-- This MIB Group represents the local topology maintained in
+-- APPN network nodes, end nodes, and branch network nodes.  It consists
+-- of two tables:
+--    - a table containing information about all of the TGs owned
+--      by this node, which is implemented by all node types.
+--    - a table containing all of the information known to this node
+--      about the TGs owned by its end nodes, which is implemented only
+--      by network nodes.
+
+appnLocalTopology     OBJECT IDENTIFIER ::= { appnObjects 3 }
+
+-- APPN Local Transmission Group (TG) table
+-- This table describes the TGs associated with this node only.
+
+appnLocalTgTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnLocalTgEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "TG Table describes all of the TGs owned by this node.  The TG
+          destination can be a virtual node, network node, LEN node, or
+          end node."
+      ::= { appnLocalTopology 1 }
+
+appnLocalTgEntry OBJECT-TYPE
+      SYNTAX AppnLocalTgEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by the destination CpName and the TG
+          number."
+      INDEX
+             {appnLocalTgDest,
+              appnLocalTgNum}
+      ::= { appnLocalTgTable 1 }
+
+AppnLocalTgEntry ::= SEQUENCE {
+
+      appnLocalTgDest             SnaControlPointName,
+      appnLocalTgNum              INTEGER,
+      appnLocalTgDestVirtual      TruthValue,
+      appnLocalTgDlcData          AppnTgDlcData,
+      appnLocalTgPortName         DisplayString,
+      appnLocalTgQuiescing        TruthValue,
+      appnLocalTgOperational      TruthValue,
+      appnLocalTgCpCpSession      INTEGER,
+      appnLocalTgEffCap           AppnTgEffectiveCapacity,
+      appnLocalTgConnCost         INTEGER,
+      appnLocalTgByteCost         INTEGER,
+      appnLocalTgSecurity         AppnTgSecurity,
+      appnLocalTgDelay            AppnTgDelay,
+      appnLocalTgUsr1             INTEGER,
+      appnLocalTgUsr2             INTEGER,
+      appnLocalTgUsr3             INTEGER,
+      appnLocalTgHprSup           INTEGER,
+      appnLocalTgIntersubnet      TruthValue,
+      appnLocalTgMltgLinkType     TruthValue,
+      appnLocalTgBranchLinkType   INTEGER
+                     }
+
+appnLocalTgDest OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name of the destination node for
+          this TG.  This is the fully qualified name of a network node,
+          end node, LEN node, or virtual routing node."
+      ::= { appnLocalTgEntry 1 }
+
+appnLocalTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Number associated with this transmission group."
+      ::= { appnLocalTgEntry 2 }
+
+appnLocalTgDestVirtual OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the destination node for this TG is a
+          virtual routing node."
+      ::= { appnLocalTgEntry 3 }
+
+appnLocalTgDlcData OBJECT-TYPE
+      SYNTAX AppnTgDlcData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "DLC-specific data related to a link connection network."
+      ::= { appnLocalTgEntry 4 }
+
+appnLocalTgPortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..10))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the local port associated
+          with this TG.  A zero-length string indicates that this value
+          is unknown."
+      ::= { appnLocalTgEntry 5 }
+
+appnLocalTgQuiescing OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is quiescing."
+      ::= { appnLocalTgEntry 6 }
+
+appnLocalTgOperational OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is operational."
+      ::= { appnLocalTgEntry 7 }
+
+appnLocalTgCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {
+                     supportedUnknownStatus(1),
+                     supportedActive(2),
+                     notSupported(3),
+                     supportedNotActive(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether CP-CP sessions are supported on this TG, and
+          whether the TG owner's contention-winner session is active on
+          this TG.  Some nodes in the network are not able to
+          differentiate support and status of CP-CP sessions, and thus
+          may report the 'supportedUnknownStatus' value."
+      ::= { appnLocalTgEntry 8 }
+
+appnLocalTgEffCap OBJECT-TYPE
+      SYNTAX AppnTgEffectiveCapacity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Effective capacity for this TG."
+      ::= { appnLocalTgEntry 9 }
+
+appnLocalTgConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Cost per connect time:  a value representing the relative cost
+          per unit of time to use the TG.  Range is from 0, which means
+          no cost, to 255."
+      ::= { appnLocalTgEntry 10 }
+
+appnLocalTgByteCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+          Range is from 0 (lowest cost) to 255."
+      ::= { appnLocalTgEntry 11 }
+
+appnLocalTgSecurity OBJECT-TYPE
+      SYNTAX AppnTgSecurity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned security level of this TG."
+      ::= { appnLocalTgEntry 12 }
+
+appnLocalTgDelay OBJECT-TYPE
+      SYNTAX AppnTgDelay
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned delay associated with this TG."
+      ::= { appnLocalTgEntry 13 }
+
+appnLocalTgUsr1 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "First user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG."
+      ::= { appnLocalTgEntry 14 }
+
+appnLocalTgUsr2 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Second user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG."
+      ::= { appnLocalTgEntry 15 }
+
+appnLocalTgUsr3 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Third user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG."
+      ::= { appnLocalTgEntry 16 }
+
+appnLocalTgHprSup OBJECT-TYPE
+      SYNTAX INTEGER {
+                 noHprSupport(1),
+                 hprBaseOnly(2),
+                 rtpTower(3),
+                 controlFlowsOverRtpTower(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates the level of high performance routing (HPR) support
+          over this TG :
+
+             noHprSupport(1)             - no HPR support
+             hprBaseOnly(2)              - HPR base (option set 1400)
+                                           supported
+             rtpTower(3)                 - HPR base and RTP tower
+                                           (option set 1401) supported
+             controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+                                           control flows over RTP
+                                           (option set 1402) supported"
+      ::= { appnLocalTgEntry 17 }
+
+appnLocalTgIntersubnet OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is an intersubnet TG,
+          which defines a border between subnetworks."
+      ::= { appnLocalTgEntry 18 }
+
+appnLocalTgMltgLinkType OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object indicates whether the transmission group is a
+          multi-link TG.  A TG that has been brought up as a multi-link
+          TG is reported as one, even if it currently has only one link
+          active."
+      ::= { appnLocalTgEntry 19 }
+
+appnLocalTgBranchLinkType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     other(1),
+                     uplink(2),
+                     downlink(3),
+                     downlinkToBranchNetworkNode(4),
+                     none(5),
+                     unknown(255)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Branch link type of this TG:
+             other(1)             = the agent has determined the TG's
+                                    branch link type to be a value other
+                                    than branch uplink or branch
+                                    downlink.  This is the value used
+                                    for a connection network TG owned by
+                                    a branch network node.
+             uplink(2)            = the TG is a branch uplink.
+             downlink(3)          = the TG is a branch downlink to an
+                                    end node.
+             downlinkToBranchNetworkNode(4) = the TG is a branch
+                                    downlink to a cascaded branch
+
+                                    network node.
+             none(5)              = the TG is not a branch TG.
+             unknown(255)         = the agent cannot determine the
+                                    branch link type of the TG."
+      ::= { appnLocalTgEntry 20 }
+
+-- APPN Local End Node Transmission Group (TG) table
+-- This table describes the TGs associated with all of the end nodes
+-- known to this node.
+
+appnLocalEnTgTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnLocalEnTgEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table describing all of the TGs owned by the end nodes known
+          to this node via TG registration.  This node does not represent
+          its own view of the TG on behalf of the partner node in this
+          table.  The TG destination can be a virtual routing node,
+          network node, or end node."
+      ::= { appnLocalTopology 2 }
+
+appnLocalEnTgEntry OBJECT-TYPE
+      SYNTAX AppnLocalEnTgEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table requires multiple indexes to uniquely identify each
+          TG.  They are originating CPname, destination CPname, and the
+          TG number."
+      INDEX
+             {appnLocalEnTgOrigin,
+              appnLocalEnTgDest,
+              appnLocalEnTgNum}
+      ::= { appnLocalEnTgTable 1 }
+
+AppnLocalEnTgEntry ::= SEQUENCE {
+      appnLocalEnTgOrigin        SnaControlPointName,
+      appnLocalEnTgDest          SnaControlPointName,
+      appnLocalEnTgNum           INTEGER,
+      appnLocalEnTgEntryTimeLeft AppnTopologyEntryTimeLeft,
+      appnLocalEnTgDestVirtual   TruthValue,
+      appnLocalEnTgDlcData       AppnTgDlcData,
+      appnLocalEnTgOperational   TruthValue,
+      appnLocalEnTgCpCpSession   INTEGER,
+      appnLocalEnTgEffCap        AppnTgEffectiveCapacity,
+      appnLocalEnTgConnCost      INTEGER,
+      appnLocalEnTgByteCost      INTEGER,
+      appnLocalEnTgSecurity      AppnTgSecurity,
+      appnLocalEnTgDelay         AppnTgDelay,
+      appnLocalEnTgUsr1          INTEGER,
+      appnLocalEnTgUsr2          INTEGER,
+      appnLocalEnTgUsr3          INTEGER,
+      appnLocalEnTgMltgLinkType  TruthValue
+                     }
+
+appnLocalEnTgOrigin OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name of the origin node for this
+          TG.  This is a fully qualified network name."
+      ::= { appnLocalEnTgEntry 1 }
+
+appnLocalEnTgDest OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name of the destination node for
+          this TG.  This is the fully qualified name of a network node,
+          end node, LEN node, or virtual routing node."
+      ::= { appnLocalEnTgEntry 2 }
+
+appnLocalEnTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Number associated with this transmission group."
+      ::= { appnLocalEnTgEntry 3 }
+
+appnLocalEnTgEntryTimeLeft OBJECT-TYPE
+      SYNTAX AppnTopologyEntryTimeLeft
+      UNITS "days"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of days before deletion of this end node TG entry."
+      ::= { appnLocalEnTgEntry 4 }
+
+appnLocalEnTgDestVirtual OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the destination node is a virtual routing
+          node."
+      ::= { appnLocalEnTgEntry 5 }
+
+appnLocalEnTgDlcData OBJECT-TYPE
+      SYNTAX AppnTgDlcData
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "DLC-specific data related to a link connection network."
+      ::= { appnLocalEnTgEntry 6 }
+
+appnLocalEnTgOperational OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether the transmission group is operational."
+      ::= { appnLocalEnTgEntry 7 }
+
+appnLocalEnTgCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {
+                     supportedUnknownStatus(1),
+                     supportedActive(2),
+                     notSupported(3),
+                     supportedNotActive(4)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether CP-CP sessions are supported on this TG, and
+          whether the TG owner's contention-winner session is active on
+          this TG.  Some nodes in the network are not able to
+
+          differentiate support and status of CP-CP sessions, and thus
+          may report the 'supportedUnknownStatus' value."
+      ::= { appnLocalEnTgEntry 8 }
+
+appnLocalEnTgEffCap OBJECT-TYPE
+      SYNTAX AppnTgEffectiveCapacity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Effective capacity for this TG."
+      ::= { appnLocalEnTgEntry 9 }
+
+appnLocalEnTgConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Cost per connect time:  a value representing the relative cost
+          per unit of time to use the TG.  Range is from 0, which means
+          no cost, to 255."
+      ::= { appnLocalEnTgEntry 10 }
+
+appnLocalEnTgByteCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+          Range is from 0, which means no cost, to 255."
+      ::= { appnLocalEnTgEntry 11 }
+
+appnLocalEnTgSecurity OBJECT-TYPE
+      SYNTAX AppnTgSecurity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned security level of this TG."
+      ::= { appnLocalEnTgEntry 12 }
+
+appnLocalEnTgDelay OBJECT-TYPE
+      SYNTAX AppnTgDelay
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "Administratively assigned delay associated with this TG."
+      ::= { appnLocalEnTgEntry 13 }
+
+appnLocalEnTgUsr1 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "First user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG."
+      ::= { appnLocalEnTgEntry 14 }
+
+appnLocalEnTgUsr2 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Second user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG."
+      ::= { appnLocalEnTgEntry 15 }
+
+appnLocalEnTgUsr3 OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Third user-defined TG characteristic for this TG.  This is
+          an administratively assigned value associated with the TG."
+      ::= { appnLocalEnTgEntry 16 }
+
+appnLocalEnTgMltgLinkType OBJECT-TYPE
+      SYNTAX TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object indicates whether the transmission group is a
+          multi-link TG.  A TG that has been brought up as a multi-link
+          TG is reported as one, even if it currently has only one link
+          active."
+      ::= { appnLocalEnTgEntry 17 }
+
+-- ************** The APPN Directory Group *****************************
+
+appnDir               OBJECT IDENTIFIER ::= { appnObjects 4 }
+appnDirPerf  OBJECT IDENTIFIER ::= { appnDir 1 }
+
+-- The APPN Directory Group
+
+-- The APPN Directory Database
+
+-- Each APPN network node and branch network node maintains directories
+-- containing information on which LUs (applications) are available and
+-- where they are located.  LUs can be located in an APPN network node,
+-- in any of its attached end nodes or branch network nodes, or in any
+-- of the nodes below one of its attached branch network nodes.
+
+appnDirMaxCaches OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "directory entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum number of cache entries allowed.  This is an
+          administratively assigned value."
+      ::= { appnDirPerf 1 }
+
+appnDirCurCaches OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "directory entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Current number of cache entries."
+      ::= { appnDirPerf 2 }
+
+appnDirCurHomeEntries OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "directory entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Current number of home entries."
+      ::= { appnDirPerf 3 }
+
+appnDirRegEntries OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "directory entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Current number of registered entries."
+      ::= { appnDirPerf 4 }
+
+appnDirInLocates OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of directed Locates received since the node was last
+          reinitialized."
+      ::= { appnDirPerf 5 }
+
+appnDirInBcastLocates OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of broadcast Locates received since the node was last
+          reinitialized."
+      ::= { appnDirPerf 6 }
+
+appnDirOutLocates OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of directed Locates sent since the node was last
+          reinitialized."
+      ::= { appnDirPerf 7 }
+
+appnDirOutBcastLocates OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of broadcast Locates sent since the node was last
+          reinitialized."
+      ::= { appnDirPerf 8 }
+
+appnDirNotFoundLocates OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of directed Locates returned with a 'not found' since
+          the node was last reinitialized."
+      ::= { appnDirPerf 9 }
+
+appnDirNotFoundBcastLocates OBJECT-TYPE
+      SYNTAX AppnNodeCounter
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of broadcast Locates returned with a 'not found' since
+          the node was last reinitialized."
+      ::= { appnDirPerf 10 }
+
+appnDirLocateOutstands OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "Locate messages"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Current number of outstanding Locates, both directed and
+          broadcast.  This value varies.  A value of zero indicates
+          that no Locates are unanswered."
+      ::= { appnDirPerf 11 }
+
+--APPN Directory table
+
+-- This table contains information about all known LUs.
+
+appnDirTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnDirEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table containing information about all known LUs."
+      ::= { appnDir 2 }
+
+appnDirEntry OBJECT-TYPE
+      SYNTAX AppnDirEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by the LU name."
+      INDEX
+             {appnDirLuName}
+      ::= { appnDirTable 1 }
+
+AppnDirEntry ::= SEQUENCE {
+      appnDirLuName                   DisplayString,
+      appnDirNnServerName             SnaControlPointName,
+      appnDirLuOwnerName              SnaControlPointName,
+      appnDirLuLocation               INTEGER,
+      appnDirType                     INTEGER,
+      appnDirApparentLuOwnerName      DisplayString
+                     }
+appnDirLuName OBJECT-TYPE
+      SYNTAX DisplayString  (SIZE (1..17))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Fully qualified network LU name in the domain of the
+           serving network node.  Entries take one of three forms:
+
+              - Explicit entries do not contain the character '*'.
+              - Partial wildcard entries have the form 'ccc*', where
+                'ccc' represents one to sixteen characters in a
+                legal SNA LuName.
+              - A full wildcard entry consists of the single
+                character '*'"
+      ::= { appnDirEntry 1 }
+
+appnDirNnServerName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified control point (CP) name of the network node
+          server.  For unassociated end node entries, a zero-length
+          string is returned."
+      ::= { appnDirEntry 2 }
+
+appnDirLuOwnerName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified CP name of the node at which the LU is
+          located.  This name is the same as the serving NN name when
+          the LU is located at a network node.  It is also the same as
+          the fully qualified LU name when this is the control point
+          LU for this node."
+      ::= { appnDirEntry 3 }
+
+appnDirLuLocation OBJECT-TYPE
+      SYNTAX INTEGER {
+                     local(1),     --Local
+                     domain(2),    --Domain
+                     xdomain(3)    --Cross Domain
+
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the location of the LU with respect to the local
+          node."
+      ::= { appnDirEntry 4 }
+
+appnDirType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     home(1),      --defined as home entry
+                     cache(2),     --learned over time
+                     registered(3) --registered by end node
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Directory types are:
+            1 - Home
+                  The LU is in the domain of the local node, and the LU
+                  information has been configured at the local node.
+
+            2 - Cache
+                  The LU has previously been located by a broadcast
+                  search, and the location information has been saved.
+
+            3 - Registered
+                  The LU is at an end node that is in the domain
+                  of the local network node.  Registered entries
+                  are registered by the served end node."
+      ::= { appnDirEntry 5 }
+
+appnDirApparentLuOwnerName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Fully qualified CP name of the node at which the LU appears to
+          be located.  This object and the appnDirLuOwnerName object are
+          related as follows:
+
+          Implementations that support this object save in their
+          directory database information about an LU's owning control
+          point that was communicated in two control vectors:
+
+               -  an Associated Resource Entry (X'3C') CV with resource
+                  type X'00F4' (ENCP)
+
+               -  a Real Owning Control Point (X'4A') CV.
+
+          The X'4A' CV is created by a branch network node to preserve
+          the name of the real owning control point for an LU below the
+          branch network node, before it overwrites this name with its
+          own name in the X'3C' CV.  The X'4A' CV is not present for LUs
+          that are not below branch network nodes.
+
+          If the information a node has about an LU's owning CP came only
+          in a X'3C' CV, then the name from the X'3C' is returned in the
+          appnDirLuOwnerName object, and a null string is returned in
+          this object.
+
+          If the information a node has about an LU's owning CP came in
+          both X'3C' and X'4A' CVs, then the name from the X'4A' is
+          returned in the appnDirLuOwnerName object, and the name from
+          the X'3C' (which will be the branch network node's name) is
+          returned in this object."
+      ::= { appnDirEntry 6 }
+
+-- ************** The APPN Class of Service Group **********************
+
+appnCos               OBJECT IDENTIFIER ::= { appnObjects 5 }
+
+-- The APPN Class of Service (COS)
+
+-- Class of Service is a means of expressing the quality of routes and
+-- the transmission priority of traffic that flows on these routes.
+-- The quality of routes is specified by two tables, a COS weight table
+-- for TGs and a COS weight table for nodes.  Values in these COS tables
+-- are administratively assigned at each APPN node, with seven default
+-- tables specified by the APPN architecture.
+-- *********************************************************************
+
+appnCosModeTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnCosModeEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table representing all of the defined mode names for this
+          node.  The table contains the matching COS name for each
+          mode name."
+      ::= { appnCos 1 }
+
+appnCosModeEntry OBJECT-TYPE
+      SYNTAX AppnCosModeEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by the mode name."
+      INDEX
+             {appnCosModeName}
+      ::= { appnCosModeTable 1 }
+
+AppnCosModeEntry ::= SEQUENCE {
+      appnCosModeName     SnaModeName,
+      appnCosModeCosName  SnaClassOfServiceName
+                     }
+
+appnCosModeName OBJECT-TYPE
+      SYNTAX SnaModeName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this mode."
+      ::= { appnCosModeEntry 1 }
+
+appnCosModeCosName OBJECT-TYPE
+      SYNTAX SnaClassOfServiceName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this class of service."
+      ::= { appnCosModeEntry 2 }
+
+-- *********************************************************************
+appnCosNameTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnCosNameEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table mapping all of the defined class-of-service names for
+          this node to their network transmission priorities."
+      ::= { appnCos 2 }
+
+appnCosNameEntry OBJECT-TYPE
+      SYNTAX AppnCosNameEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The COS name is the index to this table."
+      INDEX
+             {appnCosName}
+      ::= { appnCosNameTable 1 }
+
+AppnCosNameEntry ::= SEQUENCE {
+      appnCosName            SnaClassOfServiceName,
+      appnCosTransPriority   INTEGER
+                     }
+
+appnCosName OBJECT-TYPE
+      SYNTAX SnaClassOfServiceName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this class of service."
+      ::= { appnCosNameEntry 1 }
+
+appnCosTransPriority OBJECT-TYPE
+      SYNTAX INTEGER {
+                     low(1),               --X'01'
+                     medium(2),            --X'02'
+                     high(3),              --X'03'
+                     network(4)            --X'04'
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Transmission priority for this class of service:
+
+              low(1)     - (X'01'):  low priority
+              medium(2)  - (X'02'):  medium priority
+              high(3)    - (X'03'):  high priority
+              network(4) - (X'04'):  network priority"
+      ::= { appnCosNameEntry 2 }
+
+-- *********************************************************************
+appnCosNodeRowTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnCosNodeRowEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains all node-row information for all classes
+          of service defined in this node."
+      ::= { appnCos 3 }
+
+appnCosNodeRowEntry OBJECT-TYPE
+      SYNTAX AppnCosNodeRowEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "A node entry for a given class of service."
+      INDEX
+             {appnCosNodeRowName,
+              appnCosNodeRowIndex}
+      ::= { appnCosNodeRowTable 1 }
+
+AppnCosNodeRowEntry ::= SEQUENCE {
+      appnCosNodeRowName                 SnaClassOfServiceName,
+      appnCosNodeRowIndex                INTEGER,
+      appnCosNodeRowWgt                  DisplayString,
+      appnCosNodeRowResistMin            INTEGER,
+      appnCosNodeRowResistMax            INTEGER,
+      appnCosNodeRowMinCongestAllow      INTEGER,
+      appnCosNodeRowMaxCongestAllow      INTEGER
+                     }
+
+appnCosNodeRowName OBJECT-TYPE
+      SYNTAX SnaClassOfServiceName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this class of service."
+      ::= { appnCosNodeRowEntry 1 }
+
+appnCosNodeRowIndex OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Subindex under appnCosNodeRowName, corresponding to a row in
+          the node table for the class of service identified in
+          appnCosNodeRowName.
+
+          For each class of service, this subindex orders rows in the
+          appnCosNodeRowTable in the same order as that used for route
+          calculation in the APPN node."
+      ::= { appnCosNodeRowEntry 2 }
+
+appnCosNodeRowWgt OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Weight to be associated with the nodes that fit the criteria
+          specified by this node row.
+
+          This value can either be a character representation of an
+          integer, or a formula for calculating the weight."
+      ::= { appnCosNodeRowEntry 3 }
+
+appnCosNodeRowResistMin OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum route addition resistance value for this node.
+
+          Range of values is 0-255.  The lower the value, the more
+          desirable the node is for intermediate routing."
+      ::= { appnCosNodeRowEntry 4 }
+
+appnCosNodeRowResistMax OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum route addition resistance value for this node.
+          Range of values is 0-255.  The lower the value, the more
+          desirable the node is for intermediate routing."
+      ::= { appnCosNodeRowEntry 5 }
+
+appnCosNodeRowMinCongestAllow OBJECT-TYPE
+      SYNTAX INTEGER (0..1)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether low congestion will be tolerated.  This
+          object and appnCosNodeRowMaxCongestAllow together delineate a
+          range of acceptable congestion states for a node.  For the
+          ordered pair (minimum congestion allowed, maximum congestion
+          allowed), the values are interpreted as follows:
+
+           - (0,0):  only low congestion is acceptable
+           - (0,1):  either low or high congestion is acceptable
+           - (1,1):  only high congestion is acceptable.
+
+          Note that the combination (1,0) is not defined, since it
+          would identify a range whose lower bound was high congestion
+          and whose upper bound was low congestion."
+      ::= { appnCosNodeRowEntry 6 }
+
+appnCosNodeRowMaxCongestAllow OBJECT-TYPE
+      SYNTAX INTEGER (0..1)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether low congestion will be tolerated.  This
+          object and appnCosNodeRowMinCongestAllow together delineate a
+          range of acceptable congestion states for a node.  For the
+          ordered pair (minimum congestion allowed, maximum congestion
+          allowed), the values are interpreted as follows:
+
+           - (0,0):  only low congestion is acceptable
+           - (0,1):  either low or high congestion is acceptable
+           - (1,1):  only high congestion is acceptable.
+
+          Note that the combination (1,0) is not defined, since it
+          would identify a range whose lower bound was high congestion
+          and whose upper bound was low congestion."
+      ::= { appnCosNodeRowEntry 7 }
+
+-- *********************************************************************
+appnCosTgRowTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnCosTgRowEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table containing all the TG-row information for all classes of
+          service defined in this node."
+      ::= { appnCos 4 }
+
+appnCosTgRowEntry OBJECT-TYPE
+      SYNTAX AppnCosTgRowEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "A TG entry for a given class of service."
+      INDEX
+             {appnCosTgRowName,
+              appnCosTgRowIndex}
+      ::= { appnCosTgRowTable 1 }
+
+AppnCosTgRowEntry ::= SEQUENCE {
+      appnCosTgRowName                  SnaClassOfServiceName,
+      appnCosTgRowIndex                 INTEGER,
+      appnCosTgRowWgt                   DisplayString,
+      appnCosTgRowEffCapMin             AppnTgEffectiveCapacity,
+      appnCosTgRowEffCapMax             AppnTgEffectiveCapacity,
+      appnCosTgRowConnCostMin           INTEGER,
+      appnCosTgRowConnCostMax           INTEGER,
+      appnCosTgRowByteCostMin           INTEGER,
+      appnCosTgRowByteCostMax           INTEGER,
+      appnCosTgRowSecurityMin           AppnTgSecurity,
+      appnCosTgRowSecurityMax           AppnTgSecurity,
+      appnCosTgRowDelayMin              AppnTgDelay,
+      appnCosTgRowDelayMax              AppnTgDelay,
+      appnCosTgRowUsr1Min               INTEGER,
+      appnCosTgRowUsr1Max               INTEGER,
+      appnCosTgRowUsr2Min               INTEGER,
+      appnCosTgRowUsr2Max               INTEGER,
+      appnCosTgRowUsr3Min               INTEGER,
+      appnCosTgRowUsr3Max               INTEGER
+                     }
+
+appnCosTgRowName OBJECT-TYPE
+      SYNTAX SnaClassOfServiceName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this class of service."
+      ::= { appnCosTgRowEntry 1 }
+
+appnCosTgRowIndex OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Subindex under appnCosTgRowName, corresponding to a row in the
+          TG table for the class of service identified in
+          appnCosTgRowName.
+
+          For each class of service, this subindex orders rows in the
+          appnCosTgRowTable in the same order as that used for route
+          calculation in the APPN node."
+      ::= { appnCosTgRowEntry 2 }
+
+appnCosTgRowWgt OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..64))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Weight to be associated with the TGs that fit the criteria
+          specified by this TG row.
+
+          This value can either be a character representation of an
+          integer, or a formula for calculating the weight."
+      ::= { appnCosTgRowEntry 3 }
+
+appnCosTgRowEffCapMin OBJECT-TYPE
+      SYNTAX AppnTgEffectiveCapacity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable capacity for this class of service."
+      ::= { appnCosTgRowEntry 4 }
+
+appnCosTgRowEffCapMax OBJECT-TYPE
+      SYNTAX AppnTgEffectiveCapacity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable capacity for this class of service."
+      ::= { appnCosTgRowEntry 5 }
+
+appnCosTgRowConnCostMin OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable cost per connect time for this class of
+          service.
+
+          Cost per connect time:  a value representing the relative
+          cost per unit of time to use this TG.  Range is from 0, which
+          means no cost, to 255."
+      ::= { appnCosTgRowEntry 6 }
+
+appnCosTgRowConnCostMax OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable cost per connect time for this class of
+          service.
+
+          Cost per connect time:  a value representing the relative
+          cost per unit of time to use this TG.  Range is from 0, which
+          means no cost, to 255."
+      ::= { appnCosTgRowEntry 7 }
+
+appnCosTgRowByteCostMin OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable cost per byte transmitted for this class
+          of service.
+
+          Cost per byte transmitted:  a value representing the relative
+          cost per unit of time to use this TG.  Range is from 0, which
+          means no cost, to 255."
+      ::= { appnCosTgRowEntry 8 }
+
+appnCosTgRowByteCostMax OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable cost per byte transmitted for this class
+          of service.
+
+          Cost per byte transmitted:  a value representing the relative
+          cost of transmitting a byte over this TG.  Range is from 0,
+          which means no cost, to 255."
+      ::= { appnCosTgRowEntry 9 }
+
+appnCosTgRowSecurityMin OBJECT-TYPE
+      SYNTAX AppnTgSecurity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable security for this class of service."
+      ::= { appnCosTgRowEntry 10 }
+
+appnCosTgRowSecurityMax OBJECT-TYPE
+      SYNTAX AppnTgSecurity
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable security for this class of service."
+      ::= { appnCosTgRowEntry 11 }
+
+appnCosTgRowDelayMin OBJECT-TYPE
+      SYNTAX AppnTgDelay
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable propagation delay for this class of
+
+          service."
+      ::= { appnCosTgRowEntry 12 }
+
+appnCosTgRowDelayMax OBJECT-TYPE
+      SYNTAX AppnTgDelay
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable propagation delay for this class of
+          service."
+      ::= { appnCosTgRowEntry 13 }
+
+appnCosTgRowUsr1Min OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable value for this user-defined
+          characteristic."
+      ::= { appnCosTgRowEntry 14 }
+
+appnCosTgRowUsr1Max OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable value for this user-defined
+          characteristic."
+      ::= { appnCosTgRowEntry 15 }
+
+appnCosTgRowUsr2Min OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable value for this user-defined
+          characteristic."
+      ::= { appnCosTgRowEntry 16 }
+
+appnCosTgRowUsr2Max OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable value for this user-defined
+          characteristic."
+      ::= { appnCosTgRowEntry 17 }
+
+appnCosTgRowUsr3Min OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Minimum acceptable value for this user-defined
+          characteristic."
+      ::= { appnCosTgRowEntry 18 }
+
+appnCosTgRowUsr3Max OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Maximum acceptable value for this user-defined
+          characteristic."
+      ::= { appnCosTgRowEntry 19 }
+
+-- *********************************************************************
+-- Intermediate Session Information
+-- *********************************************************************
+appnSessIntermediate  OBJECT IDENTIFIER ::= { appnObjects 6 }
+
+-- *********************************************************************
+-- Intermediate Session Information Global Objects
+-- *********************************************************************
+-- The following simple objects allow the collection of intermediate
+-- session Information to be started and stopped.
+-- *********************************************************************
+appnIsInGlobal OBJECT IDENTIFIER ::= { appnSessIntermediate 1 }
+
+appnIsInGlobeCtrAdminStatus OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2),
+                      ready(3)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Object by which a Management Station can deactivate or
+          activate capture of intermediate-session counts and names, by
+          setting the value to notActive(1) or active(2), respectively.
+          The value ready(3) is returned on GET operations until a SET
+          has been processed; after that the value received on the most
+          recent SET is returned.
+
+          The counts referred to here are the eight objects in the
+          AppnIsInTable, from appnIsInP2SFmdPius through
+          appnIsInS2PNonFmdBytes.  The names are the four objects in this
+          table, from appnIsInPriLuName through appnIsInCosName.
+
+          Setting this object to the following values has the following
+          effects:
+
+              notActive(1)  stop collecting count data.  If a count
+                            is queried, it returns the value 0.
+                            Collection of names may, but need not be,
+                            disabled.
+              active(2)     start collecting count data.  If it is
+                            supported, collection of names is enabled."
+      ::= { appnIsInGlobal 1 }
+
+appnIsInGlobeCtrOperStatus OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether or not the intermediate session counts
+          are active.  The counts referred to here are the eight
+          objects in the AppnIsInTable, from appnIsInP2SFmdPius through
+          appnIsInS2PNonFmdBytes.  These eight counts are of type
+          Unsigned32 rather than Counter32 because when this object
+          enters the notActive state, either because a Management
+          Station has set appnInInGlobeCtrAdminStatus to notActive or
+          because of a locally-initiated transition, the counts are
+          all reset to 0.
+
+          The values for this object are:
+
+              notActive(1):  collection of counts is not active; if it
+                             is queried, a count returns the value 0.
+              active(2):     collection of counts is active."
+      ::= { appnIsInGlobal 2 }
+
+appnIsInGlobeCtrStatusTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time since the appnIsInGlobeCtrOperStatus object last
+          changed, measured in hundredths of a second.  This time can be
+          used to identify when this change occurred in relation to other
+          events in the agent, such as the last time the APPN node was
+          reinitialized."
+      ::= { appnIsInGlobal 3 }
+
+appnIsInGlobeRscv OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Indicates the current route selection control vector (RSCV)
+          collection option in effect, and allows a Management Station to
+          change the option.
+
+          The values for this object are:
+
+             notActive(1): collection of route selection control vectors
+                           is not active.
+             active(2):    collection of route selection control vectors
+                           is active."
+      ::= { appnIsInGlobal 4 }
+
+appnIsInGlobeRscvTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time since the appnIsInGlobeRscv object last changed,
+          measured in hundredths of a second.  This time can be used to
+          identify when this change occurred in relation to other events
+          in the agent, such as the last time the APPN node was
+          reinitialized."
+      ::= { appnIsInGlobal 5 }
+
+appnIsInGlobeActSess OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "sessions"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of currently active intermediate sessions."
+      ::= { appnIsInGlobal 6 }
+
+appnIsInGlobeHprBfActSess OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "sessions"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of currently active HPR intermediate sessions."
+      ::= { appnIsInGlobal 7 }
+
+-- *********************************************************************
+-- Intermediate Session Information Table
+-- *********************************************************************
+-- This table contains information on intermediate sessions
+-- which are currently active.
+-- *********************************************************************
+appnIsInTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnIsInEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Intermediate Session Information Table"
+      ::= { appnSessIntermediate 2 }
+
+appnIsInEntry OBJECT-TYPE
+      SYNTAX AppnIsInEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of Intermediate Session Information Table."
+      INDEX
+             { appnIsInFqCpName,
+               appnIsInPcid }
+      ::= { appnIsInTable 1 }
+
+AppnIsInEntry ::= SEQUENCE {
+      appnIsInFqCpName            SnaControlPointName,
+      appnIsInPcid                OCTET STRING,
+      appnIsInSessState           INTEGER,
+      appnIsInPriLuName           DisplayString,
+      appnIsInSecLuName           DisplayString,
+      appnIsInModeName            SnaModeName,
+      appnIsInCosName             SnaClassOfServiceName,
+      appnIsInTransPriority       INTEGER,
+      appnIsInSessType            INTEGER,
+      appnIsInSessUpTime          TimeTicks,
+      appnIsInCtrUpTime           TimeTicks,
+      appnIsInP2SFmdPius          Unsigned32,
+      appnIsInS2PFmdPius          Unsigned32,
+      appnIsInP2SNonFmdPius       Unsigned32,
+      appnIsInS2PNonFmdPius       Unsigned32,
+      appnIsInP2SFmdBytes         Unsigned32,
+      appnIsInS2PFmdBytes         Unsigned32,
+      appnIsInP2SNonFmdBytes      Unsigned32,
+      appnIsInS2PNonFmdBytes      Unsigned32,
+      appnIsInPsAdjCpName         SnaControlPointName,
+      appnIsInPsAdjTgNum          INTEGER,
+      appnIsInPsSendMaxBtuSize    INTEGER,
+      appnIsInPsSendPacingType    INTEGER,
+      appnIsInPsSendRpc           Gauge32,
+      appnIsInPsSendNxWndwSize    Gauge32,
+      appnIsInPsRecvPacingType    INTEGER,
+      appnIsInPsRecvRpc           Gauge32,
+      appnIsInPsRecvNxWndwSize    Gauge32,
+      appnIsInSsAdjCpName         SnaControlPointName,
+      appnIsInSsAdjTgNum          INTEGER,
+      appnIsInSsSendMaxBtuSize    INTEGER,
+      appnIsInSsSendPacingType    INTEGER,
+      appnIsInSsSendRpc           Gauge32,
+      appnIsInSsSendNxWndwSize    Gauge32,
+      appnIsInSsRecvPacingType    INTEGER,
+      appnIsInSsRecvRpc           Gauge32,
+      appnIsInSsRecvNxWndwSize    Gauge32,
+      appnIsInRouteInfo           OCTET STRING,
+      appnIsInRtpNceId            OCTET STRING,
+      appnIsInRtpTcid             OCTET STRING
+                     }
+
+appnIsInFqCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The network-qualified control point name of the node at which
+          the session and PCID originated.  For APPN and LEN nodes, this
+          is either CP name of the APPN node at which the origin LU is
+          located or the CP name of the NN serving the LEN node at which
+          the origin LU is located.  For resources served by a dependent
+          LU requester (DLUR), it is the name of the owning system
+          services control point (SSCP)."
+      ::= { appnIsInEntry 1 }
+
+appnIsInPcid OBJECT-TYPE
+      SYNTAX OCTET STRING  (SIZE (8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The procedure correlation identifier (PCID) of a session.  It
+          is an 8-byte value assigned by the primary LU."
+      ::= { appnIsInEntry 2 }
+
+appnIsInSessState OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Indicates the state of the session:
+
+              inactive(1)   - session is inactive
+              pendactive(2) - session is pending active
+              active(3)     - session is active
+              pendinact(4)  - session is pending inactive
+
+          Active sessions can be deactivated by setting this object
+          to inactive(1)."
+      ::= { appnIsInEntry 3 }
+
+appnIsInPriLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary LU name of the session.  A zero-length
+          string indicates that this name is not available."
+      ::= { appnIsInEntry 4 }
+
+appnIsInSecLuName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary LU name of the session.  A zero-length
+          string indicates that this name is not available."
+      ::= { appnIsInEntry 5 }
+
+appnIsInModeName OBJECT-TYPE
+      SYNTAX SnaModeName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The mode name used for this session."
+      ::= { appnIsInEntry 6 }
+
+appnIsInCosName OBJECT-TYPE
+      SYNTAX SnaClassOfServiceName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The Class of Service (COS) name used for this session."
+      ::= { appnIsInEntry 7 }
+
+appnIsInTransPriority OBJECT-TYPE
+      SYNTAX INTEGER {
+                     low(1),               --X'01'
+                     medium(2),            --X'02'
+                     high(3),              --X'03'
+                     network(4)            --X'04'
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Transmission priority for this class of service.  Values are:
+
+              low(1)     - (X'01'):  low priority
+              medium(2)  - (X'02'):  medium priority
+              high(3)    - (X'03'):  high priority
+              network(4) - (X'04'):  network priority"
+      ::= { appnIsInEntry 8 }
+
+appnIsInSessType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     unknown(1),
+                     lu62(2),
+                     lu0thru3(3),
+                     lu62dlur(4),
+                     lu0thru3dlur(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The type of intermediate session.  Defined values are
+
+              unknown      The session type is not known.
+
+              lu62         A session between LUs of type 6.2
+                           (as indicated by the LU type in Bind)
+
+              lu0thru3     A session between LUs of type 0, 1, 2, or 3
+                           (as indicated by the LU type in Bind)
+
+              lu62dlur     A session between LUs of type 6.2
+                           (as indicated by the LU type in Bind).
+                           One of the LUs is a dependent LU supported
+                           by the dependent LU requester (DLUR)
+                           function at this node.
+
+              lu0thru3dlur A session between LUs of type 0, 1, 2, or 3
+                           (as indicated by the LU type in Bind)
+                           One of the LUs is a dependent LU supported
+                           by the dependent LU requester (DLUR)
+                           function at this node."
+      ::= { appnIsInEntry 9 }
+
+appnIsInSessUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Length of time the session has been active, measured in
+          hundredths of a second."
+      ::= { appnIsInEntry 10 }
+
+appnIsInCtrUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "hundredths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Length of time the session counters have been active, measured
+          in hundredths of a second."
+      ::= { appnIsInEntry 11 }
+
+appnIsInP2SFmdPius OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "path information units (PIUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of function management data (FMD) path information
+          units (PIUs) sent from the Primary LU to the Secondary LU since
+          the counts were last activated."
+      ::= { appnIsInEntry 12 }
+
+appnIsInS2PFmdPius OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "path information units (PIUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of FMD PIUs sent from the Secondary LU to the Primary
+          LU since the counts were last activated."
+      ::= { appnIsInEntry 13 }
+
+appnIsInP2SNonFmdPius OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "path information units (PIUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of non-FMD PIUs sent from the Primary LU to the
+          Secondary LU since the counts were last activated."
+      ::= { appnIsInEntry 14 }
+
+appnIsInS2PNonFmdPius OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "path information units (PIUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of non-FMD PIUs sent from the Secondary LU to the
+          Primary LU since the counts were last activated."
+      ::= { appnIsInEntry 15 }
+
+appnIsInP2SFmdBytes OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of FMD bytes sent from the Primary LU to the Secondary
+          LU since the counts were last activated."
+      ::= { appnIsInEntry 16 }
+
+appnIsInS2PFmdBytes OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of FMD bytes sent from the Secondary LU to the Primary
+          LU since the counts were last activated."
+      ::= { appnIsInEntry 17 }
+
+appnIsInP2SNonFmdBytes OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of non-FMD bytes sent from the Primary LU to the
+          Secondary LU since the counts were last activated."
+      ::= { appnIsInEntry 18 }
+
+appnIsInS2PNonFmdBytes OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of non-FMD bytes sent from the Secondary LU to the
+          Primary LU since the counts were last activated."
+      ::= { appnIsInEntry 19 }
+
+appnIsInPsAdjCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage adjacent CP name of this session.  If the
+          session stage traverses an RTP connection, the CP name of the
+          remote RTP endpoint is returned."
+      ::= { appnIsInEntry 20 }
+
+appnIsInPsAdjTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..300)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage adjacent transmission group (TG) number
+          associated with this session.  If the session stage traverses
+          an RTP connection, the value 256 is returned.
+
+          Values between 257 and 300 are available for other possible
+          TG 'stand-ins' that may be added to APPN in the future."
+      ::= { appnIsInEntry 21 }
+
+appnIsInPsSendMaxBtuSize OBJECT-TYPE
+      SYNTAX INTEGER (99..32767)
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage maximum basic transmission unit (BTU) size
+          for sending data."
+      ::= { appnIsInEntry 22 }
+
+appnIsInPsSendPacingType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     fixed(1),
+                     adaptive(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage type of pacing being used for sending data."
+      ::= { appnIsInEntry 23 }
+
+appnIsInPsSendRpc OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage send residual pace count.  This represents
+          the primary stage number of message units (MUs) that can still
+          be sent in the current session window."
+      ::= { appnIsInEntry 24 }
+
+appnIsInPsSendNxWndwSize OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage size of the next window which will be used
+          to send data."
+      ::= { appnIsInEntry 25 }
+
+appnIsInPsRecvPacingType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     fixed(1),
+                     adaptive(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage type of pacing being used for receiving
+          data."
+      ::= { appnIsInEntry 26 }
+
+appnIsInPsRecvRpc OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage receive residual pace count.  This
+          represents the primary stage number of message units (MUs) that
+          can still be received in the current session window."
+      ::= { appnIsInEntry 27 }
+
+appnIsInPsRecvNxWndwSize OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The primary stage size of the next window which will be used
+          to receive data."
+      ::= { appnIsInEntry 28 }
+
+appnIsInSsAdjCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage adjacent CP name of this session.  If the
+          session stage traverses an RTP connection, the CP name of the
+          remote RTP endpoint is returned."
+      ::= { appnIsInEntry 29 }
+
+appnIsInSsAdjTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..300)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage adjacent transmission group (TG) number
+          associated with this session.  If the session stage traverses
+          an RTP connection, the value 256 is returned.
+
+          Values between 257 and 300 are available for other possible
+          TG 'stand-ins' that may be added to APPN in the future."
+      ::= { appnIsInEntry 30 }
+
+appnIsInSsSendMaxBtuSize OBJECT-TYPE
+      SYNTAX INTEGER (99..32767)
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage maximum basic transmission unit (BTU) size
+          for sending data."
+      ::= { appnIsInEntry 31 }
+
+appnIsInSsSendPacingType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     fixed(1),
+                     adaptive(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage type of pacing being used for sending
+          data."
+      ::= { appnIsInEntry 32 }
+
+appnIsInSsSendRpc OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage send residual pace count.  This represents
+          the secondary stage number of message units (MUs) that can
+          still be sent in the current session window."
+      ::= { appnIsInEntry 33 }
+
+appnIsInSsSendNxWndwSize OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage size of the next window which will be used
+          to send data."
+      ::= { appnIsInEntry 34 }
+
+appnIsInSsRecvPacingType OBJECT-TYPE
+      SYNTAX INTEGER {
+                     fixed(1),
+                     adaptive(2)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage type of pacing being used for receiving
+          data."
+      ::= { appnIsInEntry 35 }
+
+appnIsInSsRecvRpc OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage receive residual pace count.  This
+          represents the secondary stage number of message units (MUs)
+          that can still be received in the current session window."
+      ::= { appnIsInEntry 36 }
+
+appnIsInSsRecvNxWndwSize OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "message units (MUs)"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The secondary stage size of the next window which will be used
+          to receive data."
+      ::= { appnIsInEntry 37 }
+
+appnIsInRouteInfo OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..255))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The route selection control vector (RSCV X'2B') used for this
+          session.  It is present for APPN nodes; but is not present for
+          LEN nodes.  The format of this vector is described in SNA
+          Formats.  If no RSCV is available, a zero-length string is
+          returned."
+      ::= { appnIsInEntry 38 }
+
+appnIsInRtpNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The HPR local Network Connection Endpoint of the session."
+      ::= { appnIsInEntry 39 }
+
+appnIsInRtpTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The RTP connection local TCID of the session."
+      ::= { appnIsInEntry 40 }
+
+-- *********************************************************************
+-- Intermediate Session RTP Table
+-- *********************************************************************
+-- This table contains information on intermediate sessions that are
+-- being transported on Rapid Transport Protocol (RTP) connections by
+-- High Performance Routing (HPR).
+-- *********************************************************************
+appnIsRtpTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF AppnIsRtpEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "A table indicating how many ISR sessions are transported by
+          each RTP connection."
+      ::= { appnSessIntermediate 3 }
+
+appnIsRtpEntry OBJECT-TYPE
+      SYNTAX AppnIsRtpEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of Intermediate Session RTP Table."
+      INDEX
+             { appnIsRtpNceId,
+               appnIsRtpTcid }
+      ::= { appnIsRtpTable 1 }
+
+AppnIsRtpEntry ::= SEQUENCE {
+      appnIsRtpNceId              OCTET STRING,
+      appnIsRtpTcid               OCTET STRING,
+      appnIsRtpSessions           Gauge32
+                     }
+
+appnIsRtpNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local Network Connection Endpoint of the RTP connection."
+      ::= { appnIsRtpEntry  1 }
+
+appnIsRtpTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local TCID of the RTP connection."
+      ::= { appnIsRtpEntry  2 }
+
+appnIsRtpSessions OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "sessions"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The number of intermediate sessions using this RTP
+          connection."
+      ::= { appnIsRtpEntry  3 }
+
+-- *********************************************************************
+  appnTraps               OBJECT IDENTIFIER ::= { appnMIB 2 }
+-- *********************************************************************
+
+alertTrap NOTIFICATION-TYPE
+      OBJECTS  { alertIdNumber, affectedObject }
+      STATUS current
+      DESCRIPTION
+          "This trap carries a 32-bit SNA Management Services (SNA/MS)
+          Alert ID Number, as specified in SNA/MS Formats."
+      ::= { appnTraps 1 }
+
+alertIdNumber OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (4))
+      MAX-ACCESS accessible-for-notify
+      STATUS current
+      DESCRIPTION
+          "A 32-bit SNA Management Services (SNA/MS) Alert ID Number, as
+          specified in SNA/MS Formats."
+      ::= { appnTraps 2 }
+
+affectedObject OBJECT-TYPE
+      SYNTAX VariablePointer
+      MAX-ACCESS accessible-for-notify
+      STATUS current
+      DESCRIPTION
+          "The MIB object associated with the Alert condition, if there
+          is an object associated with it.  If no associated object can
+          be identified, the value 0.0 is passed in the trap."
+      ::= { appnTraps 3 }
+
+-- *********************************************************************
+-- Conformance information
+-- *********************************************************************
+
+appnConformance       OBJECT IDENTIFIER ::= { appnMIB 3 }
+
+appnCompliances       OBJECT IDENTIFIER ::= { appnConformance 1 }
+appnGroups            OBJECT IDENTIFIER ::= { appnConformance 2 }
+
+-- Compliance statements
+
+-- appnCompliance  MODULE-COMPLIANCE (deprecated:  moved to end of module)
+
+appnCompliance2  MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "The compliance statement for the SNMPv2 entities that
+            implement the APPN MIB.
+
+            In the descriptions for the conditionally mandatory groups that
+            follow, the branch network node is treated as a third node type,
+            parallel to network node and end node.  This is not how branch
+            network nodes are treated in the base APPN architecture, but it
+            increases clarity here to do it."
+        MODULE  -- this module
+
+--      Unconditionally mandatory groups
+
+                MANDATORY-GROUPS  {
+                        appnGeneralConfGroup2,
+                        appnPortConfGroup,
+                        appnLinkConfGroup2,
+                        appnLocalTgConfGroup2,
+                        appnDirTableConfGroup2
+                 }
+
+--      Conditionally mandatory groups
+                GROUP  appnNnUniqueConfGroup
+                DESCRIPTION
+                    "The appnNnUniqueConfGroup is mandatory for
+                    network nodes."
+
+                GROUP  appnEnUniqueConfGroup
+                DESCRIPTION
+                    "The appnEnUniqueConfGroup is mandatory for end
+                    nodes."
+
+                GROUP  appnVrnConfGroup
+                DESCRIPTION
+                    "The appnVrnConfGroup is mandatory for network
+                    nodes, end nodes, and branch network nodes that
+                    implement virtual routing node support."
+
+                GROUP  appnNnTopoConfGroup2
+                DESCRIPTION
+                    "The appnNnTopoConfGroup2 is mandatory for
+                    network nodes."
+
+                GROUP  appnLocalEnTopoConfGroup2
+                DESCRIPTION
+                    "The appnLocalEnTopoConfGroup2 is mandatory for
+                    network nodes."
+
+                GROUP  appnLocalDirPerfConfGroup
+                DESCRIPTION
+                    "The appnLocalDirPerfConfGroup is mandatory for
+                    APPN network nodes, end nodes, and branch network
+                    nodes."
+
+                GROUP  appnCosConfGroup
+                DESCRIPTION
+                    "The appnCosConfGroup is mandatory for APPN
+                    network nodes, end nodes, and branch network
+                    nodes."
+
+                GROUP  appnIntSessConfGroup
+                DESCRIPTION
+                    "The appnIntSessConfGroup is mandatory for
+                    network nodes and branch network nodes."
+
+                GROUP  appnHprBaseConfGroup
+                DESCRIPTION
+                    "The appnHprBaseConfGroup is mandatory for nodes
+                    that implement the HPR base (APPN option set 1400)."
+                GROUP  appnHprRtpConfGroup
+                DESCRIPTION
+                    "The appnHprRtpConfGroup is mandatory for nodes
+                    that implement the HPR RTP tower (APPN option set
+                    1401)."
+
+                GROUP  appnHprCtrlFlowsRtpConfGroup
+                DESCRIPTION
+                    "The appnHprCtrlFlowsRtpConfGroup is mandatory for
+                    nodes that implement the HPR Control Flows over
+                    RTP tower (APPN option set 1402)."
+
+                GROUP  appnHprBfConfGroup
+                DESCRIPTION
+                    "The appnHprBfConfGroup is mandatory for nodes
+                    that implement the APPN/HPR boundary function."
+
+                GROUP  appnTrapConfGroup
+                DESCRIPTION
+                    "Traps are optional for all nodes."
+
+                GROUP  appnTrapNotifGroup
+                DESCRIPTION
+                    "Traps are optional for all nodes."
+
+                GROUP  appnBrNnConfGroup
+                DESCRIPTION
+                    "The appnBrNnConfGroup is mandatory for branch
+                    network nodes."
+        ::= { appnCompliances 3 }
+         -- { appnCompliances 2 } is used by the APPN-TRAP-MIB
+
+-- Units of conformance
+appnGeneralConfGroup2  OBJECT-GROUP
+        OBJECTS  {
+                 appnNodeCpName,
+                 appnNodeId,
+                 appnNodeType,
+                 appnNodeUpTime,
+                 appnNodeParallelTg,
+                 appnNodeAdaptiveBindPacing,
+                 appnNodeHprSupport,
+                 appnNodeCounterDisconTime,
+                 appnNodeLsCounterType,
+                 appnNodeBrNn
+
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN general information and capabilities."
+        ::= { appnGroups 26 }
+         -- { appnGroups 21 - 25 } are used by the APPN-TRAP-MIB
+
+appnPortConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnPortCommand,
+                 appnPortOperState,
+                 appnPortDlcType,
+                 appnPortPortType,
+                 appnPortSIMRIM,
+                 appnPortLsRole,
+                 appnPortNegotLs,
+                 appnPortDynamicLinkSupport,
+                 appnPortMaxRcvBtuSize,
+                 appnPortMaxIframeWindow,
+                 appnPortDefLsGoodXids,
+                 appnPortDefLsBadXids,
+                 appnPortDynLsGoodXids,
+                 appnPortDynLsBadXids,
+                 appnPortSpecific,
+                 appnPortDlcLocalAddr,
+                 appnPortCounterDisconTime
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN port information."
+        ::= { appnGroups 2 }
+
+appnLinkConfGroup2  OBJECT-GROUP
+        OBJECTS  {
+                 appnLsCommand,
+                 appnLsOperState,
+                 appnLsPortName,
+                 appnLsDlcType,
+                 appnLsDynamic,
+                 appnLsAdjCpName,
+                 appnLsAdjNodeType,
+                 appnLsTgNum,
+                 appnLsLimResource,
+                 appnLsActOnDemand,
+                 appnLsMigration,
+                 appnLsPartnerNodeId,
+                 appnLsCpCpSessionSupport,
+                 appnLsMaxSendBtuSize,
+                 appnLsInXidBytes,
+                 appnLsInMsgBytes,
+                 appnLsInXidFrames,
+                 appnLsInMsgFrames,
+                 appnLsOutXidBytes,
+                 appnLsOutMsgBytes,
+                 appnLsOutXidFrames,
+                 appnLsOutMsgFrames,
+                 appnLsEchoRsps,
+                 appnLsCurrentDelay,
+                 appnLsMaxDelay,
+                 appnLsMinDelay,
+                 appnLsMaxDelayTime,
+                 appnLsGoodXids,
+                 appnLsBadXids,
+                 appnLsSpecific,
+                 appnLsActiveTime,
+                 appnLsCurrentStateTime,
+                 appnLsHprSup,
+                 appnLsLocalAddr,
+                 appnLsRemoteAddr,
+                 appnLsRemoteLsName,
+                 appnLsStatusTime,
+                 appnLsStatusLsName,
+                 appnLsStatusCpName,
+                 appnLsStatusPartnerId,
+                 appnLsStatusTgNum,
+                 appnLsStatusGeneralSense,
+                 appnLsStatusRetry,
+                 appnLsStatusEndSense,
+                 appnLsStatusXidLocalSense,
+                 appnLsStatusXidRemoteSense,
+                 appnLsStatusXidByteInError,
+                 appnLsStatusXidBitInError,
+                 appnLsStatusDlcType,
+                 appnLsStatusLocalAddr,
+                 appnLsStatusRemoteAddr,
+                 appnLsCounterDisconTime,
+                 appnLsMltgMember
+
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN link information."
+        ::= { appnGroups 27 }
+
+appnLocalTgConfGroup2  OBJECT-GROUP
+        OBJECTS  {
+                 appnLocalTgDestVirtual,
+                 appnLocalTgDlcData,
+                 appnLocalTgPortName,
+                 appnLocalTgQuiescing,
+                 appnLocalTgOperational,
+                 appnLocalTgCpCpSession,
+                 appnLocalTgEffCap,
+                 appnLocalTgConnCost,
+                 appnLocalTgByteCost,
+                 appnLocalTgSecurity,
+                 appnLocalTgDelay,
+                 appnLocalTgUsr1,
+                 appnLocalTgUsr2,
+                 appnLocalTgUsr3,
+                 appnLocalTgHprSup,
+                 appnLocalTgIntersubnet,
+                 appnLocalTgMltgLinkType
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN local TG information."
+        ::= { appnGroups 28 }
+
+appnDirTableConfGroup2  OBJECT-GROUP
+        OBJECTS  {
+                 appnDirNnServerName,
+                 appnDirLuOwnerName,
+                 appnDirLuLocation,
+                 appnDirType,
+                 appnDirApparentLuOwnerName
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of the
+            APPN directory database."
+        ::= { appnGroups 29 }
+
+appnNnUniqueConfGroup  OBJECT-GROUP
+
+        OBJECTS  {
+                 appnNodeNnCentralDirectory,
+                 appnNodeNnTreeCache,
+                 appnNodeNnRouteAddResist,
+                 appnNodeNnIsr,
+                 appnNodeNnFrsn,
+                 appnNodeNnPeriBorderSup,
+                 appnNodeNnInterchangeSup,
+                 appnNodeNnExteBorderSup,
+                 appnNodeNnSafeStoreFreq,
+                 appnNodeNnRsn,
+                 appnNodeNnCongested,
+                 appnNodeNnIsrDepleted,
+                 appnNodeNnQuiescing,
+                 appnNodeNnGateway
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing instrumentation unique
+            to APPN network nodes."
+        ::= { appnGroups 6 }
+
+appnEnUniqueConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnNodeEnModeCosMap,
+                 appnNodeEnNnServer,
+                 appnNodeEnLuSearch
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing instrumentation for
+            APPN end nodes.  Some of these objects also appear in the
+            instrumentation for a branch network node."
+        ::= { appnGroups 7 }
+
+appnVrnConfGroup       OBJECT-GROUP
+        OBJECTS  {
+                 appnVrnPortName
+                 }
+        STATUS  current
+        DESCRIPTION
+            "An object providing the instrumentation for virtual
+            routing node support in an APPN node."
+        ::= { appnGroups 8 }
+
+appnNnTopoConfGroup2    OBJECT-GROUP
+        OBJECTS  {
+                 appnNnTopoMaxNodes,
+                 appnNnTopoCurNumNodes,
+                 appnNnTopoNodePurges,
+                 appnNnTopoTgPurges,
+                 appnNnTopoTotalTduWars,
+                 appnNnNodeFREntryTimeLeft,
+                 appnNnNodeFRType,
+                 appnNnNodeFRRsn,
+                 appnNnNodeFRRouteAddResist,
+                 appnNnNodeFRCongested,
+                 appnNnNodeFRIsrDepleted,
+                 appnNnNodeFRQuiescing,
+                 appnNnNodeFRGateway,
+                 appnNnNodeFRCentralDirectory,
+                 appnNnNodeFRIsr,
+                 appnNnNodeFRGarbageCollect,
+                 appnNnNodeFRHprSupport,
+                 appnNnNodeFRPeriBorderSup,
+                 appnNnNodeFRInterchangeSup,
+                 appnNnNodeFRExteBorderSup,
+                 appnNnNodeFRBranchAwareness,
+                 appnNnTgFREntryTimeLeft,
+                 appnNnTgFRDestVirtual,
+                 appnNnTgFRDlcData,
+                 appnNnTgFRRsn,
+                 appnNnTgFROperational,
+                 appnNnTgFRQuiescing,
+                 appnNnTgFRCpCpSession,
+                 appnNnTgFREffCap,
+                 appnNnTgFRConnCost,
+                 appnNnTgFRByteCost,
+                 appnNnTgFRSecurity,
+                 appnNnTgFRDelay,
+                 appnNnTgFRUsr1,
+                 appnNnTgFRUsr2,
+                 appnNnTgFRUsr3,
+                 appnNnTgFRGarbageCollect,
+                 appnNnTgFRSubareaNum,
+                 appnNnTgFRHprSup,
+                 appnNnTgFRDestHprTrans,
+                 appnNnTgFRTypeIndicator,
+                 appnNnTgFRIntersubnet,
+                 appnNnTgFRMltgLinkType,
+                 appnNnTgFRBranchTg
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnNnTopoConfGroup is mandatory only for network
+            nodes."
+        ::= { appnGroups 30 }
+
+appnLocalEnTopoConfGroup2   OBJECT-GROUP
+        OBJECTS  {
+                 appnLocalEnTgEntryTimeLeft,
+                 appnLocalEnTgDestVirtual,
+                 appnLocalEnTgDlcData,
+                 appnLocalEnTgOperational,
+                 appnLocalEnTgCpCpSession,
+                 appnLocalEnTgEffCap,
+                 appnLocalEnTgConnCost,
+                 appnLocalEnTgByteCost,
+                 appnLocalEnTgSecurity,
+                 appnLocalEnTgDelay,
+                 appnLocalEnTgUsr1,
+                 appnLocalEnTgUsr2,
+                 appnLocalEnTgUsr3,
+                 appnLocalEnTgMltgLinkType
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing the instrumentation
+            of the information that a network node possesses about
+            the end nodes directly attached to it."
+        ::= { appnGroups 31 }
+
+appnLocalDirPerfConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnDirMaxCaches,
+                 appnDirCurCaches,
+                 appnDirCurHomeEntries,
+                 appnDirRegEntries,
+                 appnDirInLocates,
+                 appnDirInBcastLocates,
+                 appnDirOutLocates,
+                 appnDirOutBcastLocates,
+                 appnDirNotFoundLocates,
+                 appnDirNotFoundBcastLocates,
+                 appnDirLocateOutstands
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnLocalDirPerfConfGroup is mandatory only for APPN
+            network nodes and end nodes."
+        ::= { appnGroups 11 }
+
+appnCosConfGroup          OBJECT-GROUP
+        OBJECTS  {
+
+                 appnCosModeCosName,
+                 appnCosTransPriority,
+                 appnCosNodeRowWgt,
+                 appnCosNodeRowResistMin,
+                 appnCosNodeRowResistMax,
+                 appnCosNodeRowMinCongestAllow,
+                 appnCosNodeRowMaxCongestAllow,
+                 appnCosTgRowWgt,
+                 appnCosTgRowEffCapMin,
+                 appnCosTgRowEffCapMax,
+                 appnCosTgRowConnCostMin,
+                 appnCosTgRowConnCostMax,
+                 appnCosTgRowByteCostMin,
+                 appnCosTgRowByteCostMax,
+                 appnCosTgRowSecurityMin,
+                 appnCosTgRowSecurityMax,
+                 appnCosTgRowDelayMin,
+                 appnCosTgRowDelayMax,
+                 appnCosTgRowUsr1Min,
+                 appnCosTgRowUsr1Max,
+                 appnCosTgRowUsr2Min,
+                 appnCosTgRowUsr2Max,
+                 appnCosTgRowUsr3Min,
+                 appnCosTgRowUsr3Max
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnCosConfGroup is mandatory only for APPN network
+            nodes and end nodes."
+        ::= { appnGroups 12 }
+
+appnIntSessConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnIsInGlobeCtrAdminStatus,
+                 appnIsInGlobeCtrOperStatus,
+                 appnIsInGlobeCtrStatusTime,
+                 appnIsInGlobeRscv,
+                 appnIsInGlobeRscvTime,
+                 appnIsInGlobeActSess,
+                 appnIsInSessState,
+                 appnIsInPriLuName,
+                 appnIsInSecLuName,
+                 appnIsInModeName,
+                 appnIsInCosName,
+                 appnIsInTransPriority,
+                 appnIsInSessType,
+                 appnIsInSessUpTime,
+                 appnIsInCtrUpTime,
+                 appnIsInP2SFmdPius,
+                 appnIsInS2PFmdPius,
+                 appnIsInP2SNonFmdPius,
+                 appnIsInS2PNonFmdPius,
+                 appnIsInP2SFmdBytes,
+                 appnIsInS2PFmdBytes,
+                 appnIsInP2SNonFmdBytes,
+                 appnIsInS2PNonFmdBytes,
+                 appnIsInPsAdjCpName,
+                 appnIsInPsAdjTgNum,
+                 appnIsInPsSendMaxBtuSize,
+                 appnIsInPsSendPacingType,
+                 appnIsInPsSendRpc,
+                 appnIsInPsSendNxWndwSize,
+                 appnIsInPsRecvPacingType,
+                 appnIsInPsRecvRpc,
+                 appnIsInPsRecvNxWndwSize,
+                 appnIsInSsAdjCpName,
+                 appnIsInSsAdjTgNum,
+                 appnIsInSsSendMaxBtuSize,
+                 appnIsInSsSendPacingType,
+                 appnIsInSsSendRpc,
+                 appnIsInSsSendNxWndwSize,
+                 appnIsInSsRecvPacingType,
+                 appnIsInSsRecvRpc,
+                 appnIsInSsRecvNxWndwSize,
+                 appnIsInRouteInfo
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnIntSessConfGroup is mandatory only for network
+            nodes."
+        ::= { appnGroups 13 }
+
+appnHprBaseConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnNodeHprIntRteSetups,
+                 appnNodeHprIntRteRejects,
+                 appnLsErrRecoSup,
+                 appnLsForAnrLabel,
+                 appnLsRevAnrLabel
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnHprBaseConfGroup is mandatory only for nodes that
+            implement the HPR base (APPN option set 1400)."
+        ::= { appnGroups 14 }
+
+appnHprRtpConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnNodeMaxSessPerRtpConn,
+                 appnNodeHprOrgRteSetups,
+                 appnNodeHprOrgRteRejects,
+                 appnNodeHprEndRteSetups,
+                 appnNodeHprEndRteRejects,
+                 appnLsBfNceId
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnHprRtpConfGroup is mandatory only for nodes that
+            implement the HPR RTP tower (APPN option set 1401)."
+        ::= { appnGroups 15 }
+
+appnHprCtrlFlowsRtpConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnLsCpCpNceId,
+                 appnLsRouteNceId
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnHprCtrlFlowsRtpConfGroup is mandatory only for nodes
+            that implement the HPR Control Flows over RTP tower (APPN
+            option set 1402)."
+        ::= { appnGroups 16 }
+
+appnHprBfConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnIsInGlobeHprBfActSess,
+                 appnIsInRtpNceId,
+                 appnIsInRtpTcid,
+                 appnIsRtpSessions
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnHprBfConfGroup is mandatory only for nodes that
+            implement the APPN/HPR boundary function."
+        ::= { appnGroups 17 }
+
+appnTrapConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 alertIdNumber,
+                 affectedObject
+                 }
+        STATUS  current
+        DESCRIPTION
+            "The appnTrapConfGroup is optional for all APPN nodes.  Nodes
+
+            implementing this group shall also implement the
+            appnTrapNotifGroup."
+        ::= { appnGroups 18 }
+
+appnTrapNotifGroup    NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                      alertTrap
+                      }
+        STATUS  current
+        DESCRIPTION
+            "The appnTrapNotifGroup is optional for all APPN nodes.
+            Nodes implementing this group shall also implement the
+            appnTrapConfGroup."
+        ::= { appnGroups 19 }
+
+appnBrNnConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnNodeEnNnServer,
+                 appnNodeEnLuSearch,
+                 appnLocalTgBranchLinkType
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing instrumentation for
+            branch network nodes.  Some of these objects also appear
+            in the instrumentation for an end node.
+
+            Note:  A branch network node always returns endNode(2)
+            as the value of the appnNodeType object from the
+            appnGeneralConfGroup2 conformance group."
+        ::= { appnGroups 20 }
+
+-- *********************************************************************
+-- Deprecated definitions
+-- *********************************************************************
+
+appnNodeMibVersion OBJECT-TYPE
+      SYNTAX DisplayString  (SIZE (11))
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+          "The value of LAST-UPDATED from this module's MODULE-IDENTITY
+          macro.  This object gives a Management Station an easy way of
+          determining the level of the MIB supported by an agent.
+
+          Since this object incorporates the Year 2000-unfriendly
+          2-digit year specified in SMI for the LAST-UPDATED field, and
+
+          since it was not found to be particularly useful, it has been
+          deprecated.  No replacement object has been defined."
+      ::= { appnGeneralInfoAndCaps 2 }
+
+appnCompliance  MODULE-COMPLIANCE
+        STATUS  deprecated
+        DESCRIPTION
+            "The compliance statement for the SNMPv2 entities that
+            implement the APPN MIB.
+
+            This is the compliance statement for the RFC 2155-level version
+            of the APPN MIB.  It was deprecated as new objects were added
+            to the MIB for MLTG, branch network node, and other extensions
+            to the APPN architecture."
+        MODULE  -- this module
+
+--      Unconditionally mandatory groups
+                MANDATORY-GROUPS  {
+                        appnGeneralConfGroup,
+                        appnPortConfGroup,
+                        appnLinkConfGroup,
+                        appnLocalTgConfGroup,
+                        appnDirTableConfGroup
+                 }
+
+--      Conditionally mandatory groups
+                GROUP  appnNnUniqueConfGroup
+                DESCRIPTION
+                    "The appnNnUniqueConfGroup is mandatory only for
+                    network nodes."
+
+                GROUP  appnEnUniqueConfGroup
+                DESCRIPTION
+                    "The appnEnUniqueConfGroup is mandatory only for end
+                    nodes."
+
+                GROUP  appnVrnConfGroup
+                DESCRIPTION
+                    "The appnVrnConfGroup is mandatory only for network
+                    nodes and end nodes that implement virtual routing
+                    node support."
+
+                GROUP  appnNnTopoConfGroup
+                DESCRIPTION
+                    "The appnNnTopoConfGroup is mandatory only for
+                    network nodes."
+
+                GROUP  appnLocalEnTopoConfGroup
+                DESCRIPTION
+                    "The appnLocalEnTopoConfGroup is mandatory only for
+                    network nodes."
+
+                GROUP  appnLocalDirPerfConfGroup
+                DESCRIPTION
+                    "The appnLocalDirPerfConfGroup is mandatory only for
+                    APPN network nodes and end nodes."
+
+                GROUP  appnCosConfGroup
+                DESCRIPTION
+                    "The appnCosConfGroup is mandatory only for APPN
+                    network nodes and end nodes."
+
+                GROUP  appnIntSessConfGroup
+                DESCRIPTION
+                    "The appnIntSessConfGroup is mandatory only for
+                    network nodes."
+
+                GROUP  appnHprBaseConfGroup
+                DESCRIPTION
+                    "The appnHprBaseConfGroup is mandatory only for nodes
+                    that implement the HPR base (APPN option set 1400)."
+
+                GROUP  appnHprRtpConfGroup
+                DESCRIPTION
+                    "The appnHprRtpConfGroup is mandatory only for nodes
+                    that implement the HPR RTP tower (APPN option set
+                    1401)."
+                GROUP  appnHprCtrlFlowsRtpConfGroup
+                DESCRIPTION
+                    "The appnHprCtrlFlowsRtpConfGroup is mandatory only
+                    for nodes that implement the HPR Control Flows over
+                    RTP tower (APPN option set 1402)."
+
+                GROUP  appnHprBfConfGroup
+                DESCRIPTION
+                    "The appnHprBfConfGroup is mandatory only for nodes
+                    that implement the APPN/HPR boundary function."
+
+                GROUP  appnTrapConfGroup
+                DESCRIPTION
+                    "Traps are optional for all nodes."
+
+                GROUP  appnTrapNotifGroup
+                DESCRIPTION
+                    "Traps are optional for all nodes."
+        ::= { appnCompliances 1 }
+
+appnGeneralConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnNodeCpName,
+                 appnNodeMibVersion,
+                 appnNodeId,
+                 appnNodeType,
+                 appnNodeUpTime,
+                 appnNodeParallelTg,
+                 appnNodeAdaptiveBindPacing,
+                 appnNodeHprSupport,
+                 appnNodeCounterDisconTime
+                 }
+        STATUS  deprecated
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN general information and capabilities.
+
+            This RFC 2155-level group was deprecated when the
+            appnNodeMibVersion object was removed and the
+            appnNodeLsCounterType and appnNodeBrNn objects were added."
+        ::= { appnGroups 1 }
+
+appnLinkConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnLsCommand,
+                 appnLsOperState,
+                 appnLsPortName,
+                 appnLsDlcType,
+                 appnLsDynamic,
+                 appnLsAdjCpName,
+                 appnLsAdjNodeType,
+                 appnLsTgNum,
+                 appnLsLimResource,
+                 appnLsActOnDemand,
+                 appnLsMigration,
+                 appnLsPartnerNodeId,
+                 appnLsCpCpSessionSupport,
+                 appnLsMaxSendBtuSize,
+                 appnLsInXidBytes,
+                 appnLsInMsgBytes,
+                 appnLsInXidFrames,
+                 appnLsInMsgFrames,
+                 appnLsOutXidBytes,
+                 appnLsOutMsgBytes,
+                 appnLsOutXidFrames,
+                 appnLsOutMsgFrames,
+                 appnLsEchoRsps,
+                 appnLsCurrentDelay,
+                 appnLsMaxDelay,
+                 appnLsMinDelay,
+                 appnLsMaxDelayTime,
+                 appnLsGoodXids,
+                 appnLsBadXids,
+                 appnLsSpecific,
+                 appnLsActiveTime,
+                 appnLsCurrentStateTime,
+                 appnLsHprSup,
+                 appnLsLocalAddr,
+                 appnLsRemoteAddr,
+                 appnLsRemoteLsName,
+                 appnLsStatusTime,
+                 appnLsStatusLsName,
+                 appnLsStatusCpName,
+                 appnLsStatusPartnerId,
+                 appnLsStatusTgNum,
+                 appnLsStatusGeneralSense,
+                 appnLsStatusRetry,
+                 appnLsStatusEndSense,
+                 appnLsStatusXidLocalSense,
+                 appnLsStatusXidRemoteSense,
+                 appnLsStatusXidByteInError,
+                 appnLsStatusXidBitInError,
+                 appnLsStatusDlcType,
+                 appnLsStatusLocalAddr,
+                 appnLsStatusRemoteAddr,
+                 appnLsCounterDisconTime
+                 }
+        STATUS  deprecated
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN link information.
+
+            This RFC 2155-level group was deprecated when the
+            appnLsMltgMember object was added."
+        ::= { appnGroups 3 }
+
+appnLocalTgConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnLocalTgDestVirtual,
+                 appnLocalTgDlcData,
+                 appnLocalTgPortName,
+                 appnLocalTgQuiescing,
+                 appnLocalTgOperational,
+                 appnLocalTgCpCpSession,
+                 appnLocalTgEffCap,
+                 appnLocalTgConnCost,
+                 appnLocalTgByteCost,
+                 appnLocalTgSecurity,
+                 appnLocalTgDelay,
+                 appnLocalTgUsr1,
+                 appnLocalTgUsr2,
+                 appnLocalTgUsr3,
+                 appnLocalTgHprSup,
+                 appnLocalTgIntersubnet
+                 }
+        STATUS  deprecated
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of
+            APPN local TG information.
+
+            This RFC 2155-level group was deprecated when the
+            appnLocalTgMltgLinkType object was added."
+        ::= { appnGroups 4 }
+
+appnDirTableConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                 appnDirNnServerName,
+                 appnDirLuOwnerName,
+                 appnDirLuLocation,
+                 appnDirType
+                 }
+        STATUS  deprecated
+        DESCRIPTION
+            "A collection of objects providing the instrumentation of the
+            APPN directory database.
+
+            This RFC 2155-level group was deprecated when the
+            appnDirApparentLuOwnerName object was added."
+        ::= { appnGroups 5 }
+
+appnNnTopoConfGroup    OBJECT-GROUP
+        OBJECTS  {
+                 appnNnTopoMaxNodes,
+                 appnNnTopoCurNumNodes,
+                 appnNnTopoNodePurges,
+                 appnNnTopoTgPurges,
+                 appnNnTopoTotalTduWars,
+                 appnNnNodeFREntryTimeLeft,
+                 appnNnNodeFRType,
+                 appnNnNodeFRRsn,
+                 appnNnNodeFRRouteAddResist,
+                 appnNnNodeFRCongested,
+                 appnNnNodeFRIsrDepleted,
+                 appnNnNodeFRQuiescing,
+                 appnNnNodeFRGateway,
+                 appnNnNodeFRCentralDirectory,
+                 appnNnNodeFRIsr,
+                 appnNnNodeFRGarbageCollect,
+                 appnNnNodeFRHprSupport,
+                 appnNnNodeFRPeriBorderSup,
+                 appnNnNodeFRInterchangeSup,
+                 appnNnNodeFRExteBorderSup,
+                 appnNnTgFREntryTimeLeft,
+                 appnNnTgFRDestVirtual,
+                 appnNnTgFRDlcData,
+                 appnNnTgFRRsn,
+                 appnNnTgFROperational,
+                 appnNnTgFRQuiescing,
+                 appnNnTgFRCpCpSession,
+                 appnNnTgFREffCap,
+                 appnNnTgFRConnCost,
+                 appnNnTgFRByteCost,
+                 appnNnTgFRSecurity,
+                 appnNnTgFRDelay,
+                 appnNnTgFRUsr1,
+                 appnNnTgFRUsr2,
+                 appnNnTgFRUsr3,
+                 appnNnTgFRGarbageCollect,
+                 appnNnTgFRSubareaNum,
+                 appnNnTgFRHprSup,
+                 appnNnTgFRDestHprTrans,
+                 appnNnTgFRTypeIndicator,
+                 appnNnTgFRIntersubnet
+                 }
+        STATUS  deprecated
+        DESCRIPTION
+            "The appnNnTopoConfGroup is mandatory only for network
+            nodes.
+
+            This RFC 2155-level group was deprecated when the
+            appnNnNodeFRBranchAwareness, appnNnTgFRMltgLinkType, and
+            appnNnFRBranchTg objects were added."
+        ::= { appnGroups 9 }
+
+appnLocalEnTopoConfGroup   OBJECT-GROUP
+        OBJECTS  {
+
+                 appnLocalEnTgEntryTimeLeft,
+                 appnLocalEnTgDestVirtual,
+                 appnLocalEnTgDlcData,
+                 appnLocalEnTgOperational,
+                 appnLocalEnTgCpCpSession,
+                 appnLocalEnTgEffCap,
+                 appnLocalEnTgConnCost,
+                 appnLocalEnTgByteCost,
+                 appnLocalEnTgSecurity,
+                 appnLocalEnTgDelay,
+                 appnLocalEnTgUsr1,
+                 appnLocalEnTgUsr2,
+                 appnLocalEnTgUsr3
+                 }
+        STATUS  deprecated
+        DESCRIPTION
+            "The appnLocalEnTopoConfGroup is mandatory only for network
+            nodes.
+
+            This RFC 2155-level group was deprecated when the
+            appnLocalEnTgMltgLinkType object was added."
+        ::= { appnGroups 10 }
+
+END
diff --git a/snmp_builder/mibs/APPN-TRAP-MIB.mib b/snmp_builder/mibs/APPN-TRAP-MIB.mib
new file mode 100644
index 0000000..3ee3da2
--- /dev/null
+++ b/snmp_builder/mibs/APPN-TRAP-MIB.mib
@@ -0,0 +1,477 @@
+APPN-TRAP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+        Counter32, OBJECT-TYPE, MODULE-IDENTITY,
+        NOTIFICATION-TYPE
+                FROM SNMPv2-SMI
+
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+
+        appnMIB, appnIsInP2SFmdPius, appnIsInS2PFmdPius,
+        appnIsInP2SNonFmdPius, appnIsInS2PNonFmdPius,
+        appnIsInP2SFmdBytes, appnIsInS2PFmdBytes,
+        appnIsInP2SNonFmdBytes, appnIsInS2PNonFmdBytes,
+        appnIsInSessUpTime, appnObjects,
+        appnLocalTgOperational, appnLocalTgCpCpSession,
+        appnPortOperState, appnLsOperState,
+        appnCompliances, appnGroups
+                 FROM APPN-MIB
+
+        dlurDlusSessnStatus
+                 FROM APPN-DLUR-MIB;
+
+appnTrapMIB MODULE-IDENTITY
+        LAST-UPDATED  "9808310000Z" -- August 31, 1998
+        ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
+        CONTACT-INFO
+                "
+                        Bob Clouston
+                        Cisco Systems
+                        7025 Kit Creek Road
+                        P.O. Box 14987
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 472 2333
+                        E-mail: clouston@cisco.com
+
+                        Bob Moore
+                        IBM Corporation
+                        4205 S. Miami Boulevard
+                        BRQA/501
+                        P.O. Box 12195
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 254 4436
+                        E-mail: remoore@us.ibm.com
+                "
+      DESCRIPTION
+                "This MIB module defines notifications to be generated by
+                network devices with APPN capabilities.  It presupposes
+                support for the APPN MIB.  It also presupposes
+                support for the DLUR MIB for implementations
+                that support the DLUR-related groups."
+::= { appnMIB 0 }
+
+-- *********************************************************************
+-- Notifications
+-- *********************************************************************
+
+appnIsrAccountingDataTrap NOTIFICATION-TYPE
+      OBJECTS  {
+                appnIsInP2SFmdPius,
+                appnIsInS2PFmdPius,
+                appnIsInP2SNonFmdPius,
+                appnIsInS2PNonFmdPius,
+                appnIsInP2SFmdBytes,
+                appnIsInS2PFmdBytes,
+                appnIsInP2SNonFmdBytes,
+                appnIsInS2PNonFmdBytes,
+                appnIsInSessUpTime
+               }
+      STATUS current
+      DESCRIPTION
+          "When it has been enabled, this notification is generated by an
+          APPN node whenever an ISR session passing through the node is
+          taken down, regardless of whether the session went down
+          normally or abnormally.  Its purpose is to allow a management
+          application (primarily an accounting application) that is
+          monitoring the ISR counts to receive the final values of these
+          counts, so that the application can properly account for the
+          amounts the counts were incremented since the last time the
+          application polled them.  The appnIsInSessUpTime object
+          provides the total amount of time that the session was active.
+
+          This notification is not a substitute for polling the ISR
+          counts.  In particular, the count values reported in this
+          notification cannot be assumed to be the complete totals for
+          the life of the session, since they may have wrapped while the
+          session was up.
+
+          The session to which the objects in this notification apply is
+          identified by the fully qualified CP name and PCID that make up
+          the table index.  An instance of this notification will contain
+          exactly one instance of each of its objects, and these objects
+          will all belong to the same conceptual row of the
+          appnIsInTable.
+
+          Generation of this notification is controlled by the same
+          object in the APPN MIB, appnIsInGlobeCtrAdminStatus, that
+          controls whether the count objects themselves are being
+          incremented."
+      ::= { appnTrapMIB 1 }
+
+appnLocalTgOperStateChangeTrap NOTIFICATION-TYPE
+      OBJECTS  {
+                appnLocalTgTableChanges,
+                appnLocalTgOperational
+               }
+      STATUS current
+      DESCRIPTION
+          "When it has been enabled, this notification makes it possible
+          for an APPN topology application to get asynchronous
+          notifications of local TG operational state changes,
+          and thus to reduce the frequency with which it polls
+          for these changes.
+
+          This notification is sent whenever there is a change to
+          the appnLocalTgOperational object in a row of the
+          appnLocalTgTable.  This notification is only sent for row
+          creation if the row is created with a value of 'true' for
+          appnLocalTgOperational.  This notification is only sent for
+          row deletion if the last value of appnLocalTgOperational was
+          'true'.  In this case, the value of appnLocalTgOperational
+          in the notification shall be 'false', since the deletion of
+          a row indicates that the TG is no longer operational.
+
+          The notification is more than a simple 'poll me now' indication.
+          It carries both a count of local TG topology changes, and the
+          current operational state itself.  The count of changes allows an
+          application to detect lost notifications, either when polling
+          or upon receiving a subsequent notification, at which point it
+          knows it must retrieve the entire appnLocalTgTable again.
+          This is the same count as used in the appnLocalCpCpStateChangeTrap.
+          A lost notification could indicate a local TG CP-CP session state
+          change or an operational state change.
+
+          Generation of this notification is controlled by the
+          appnTrapControl object."
+      ::= { appnTrapMIB 2 }
+
+appnLocalTgCpCpChangeTrap NOTIFICATION-TYPE
+      OBJECTS  {
+                appnLocalTgTableChanges,
+                appnLocalTgCpCpSession
+               }
+      STATUS current
+      DESCRIPTION
+          "When it has been enabled, this notification makes it possible
+
+          for an APPN topology application to get asynchronous
+          notifications of local TG control-point to control-point (CP-CP)
+          session state changes, and thus to reduce the
+          frequency with which it polls for these changes.
+
+          This notification is sent whenever there is a change to
+          the appnLocalTgCpCpSession object but NOT the
+          appnLocalTgOperational object in a row of the appnLocalTgTable.
+          This notification is never sent for appnLocalTgTable row
+          creation or deletion.
+
+          The notification is more than a simple 'poll me now' indication.
+          It carries both a count of local TG topology changes, and the
+          current CP-CP session state itself.  The count of changes allows
+          an application to detect lost notifications, either when polling
+          or upon receiving a subsequent notification, at which point it
+          knows it must retrieve the entire appnLocalTgTable again.  This
+          is the same count as used in the appnLocalTgOperStateChangeTrap.
+          A lost notification could indicate a local TG CP-CP session
+          state change or an operational state change.
+
+          Generation of this notification is controlled by the
+          appnTrapControl object."
+      ::= { appnTrapMIB 3 }
+
+appnPortOperStateChangeTrap NOTIFICATION-TYPE
+      OBJECTS  {
+                appnPortTableChanges,
+                appnPortOperState
+               }
+      STATUS current
+      DESCRIPTION
+          "When it has been enabled, this notification makes it possible
+          for an APPN topology application to get asynchronous
+          notifications of port operational state changes, and thus to
+          reduce the frequency with which it polls for these changes.
+          This notification is only sent when a appnPortOperState has
+          transitioned to a value of 'active' or 'inactive'.
+
+          This notification is sent whenever there is a appnPortOperState
+          object transition to 'inactive' or 'active' state in the
+          appnPortTable.  This notification is only sent for row creation
+          if the row is created with a value of 'active' for
+          appnPortOperState.  This notification is only sent for
+          row deletion if the last value of appnPortOperState was
+          'active'.  In this case, the value of appnPortOperState
+
+          in the notification shall be 'inactive', since the deletion of
+          a row indicates that the port is no longer active.
+
+          The notification is more than a simple 'poll me now' indication.
+          It carries both a count of port table changes, and the
+          operational state itself.  The count of changes allows an
+          application to detect lost notifications, either when polling
+          or upon receiving a subsequent notification, at which point
+          it knows it must retrieve the entire appnPortTable again.
+
+          Generation of this notification is controlled by the
+          appnTrapControl object."
+      ::= { appnTrapMIB 4 }
+
+appnLsOperStateChangeTrap NOTIFICATION-TYPE
+      OBJECTS  {
+                appnLsTableChanges,
+                appnLsOperState
+               }
+      STATUS current
+      DESCRIPTION
+          "When it has been enabled, this notification makes it possible
+          for an APPN topology application to get asynchronous
+          notifications of link station operational state changes, and
+          thus to reduce the frequency with which it polls for these
+          changes.  This notification is only sent when a appnLsOperState
+          has transitioned to a value of 'active' or 'inactive'.
+
+          This notification is sent whenever there is a appnLsOperState
+          object transition to 'inactive' or 'active' state in the
+          appnLsTable.  This notification is only sent for row creation
+          if the row is created with a value of 'active' for
+          appnLsOperState.  This notification is only sent for
+          row deletion if the last value of appnLsOperState was
+          'active'.  In this case, the value of appnLsOperState
+          in the notification shall be 'inactive', since the deletion of
+          a row indicates that the link station is no longer active.
+
+          The notification is more than a simple 'poll me now' indication.
+          It carries both a count of link station table changes, and the
+          operational state itself.  The count of changes allows an
+          application to detect lost notifications, either when polling
+          or upon receiving a subsequent notification, at which point it
+          knows it must retrieve the entire appnLsTable again.
+
+          Generation of this notification is controlled by the
+          appnTrapControl object."
+      ::= { appnTrapMIB 5 }
+
+dlurDlusStateChangeTrap NOTIFICATION-TYPE
+      OBJECTS  {
+                dlurDlusTableChanges,
+                dlurDlusSessnStatus
+               }
+      STATUS current
+      DESCRIPTION
+          "When it has been enabled, this notification makes it possible
+          for an APPN topology application to get asynchronous
+          notifications of DLUR-DLUS session changes, and thus to reduce
+          the frequency with which it polls for these changes.
+
+          This notification is sent whenever there is a dlurDlusSessnStatus
+          object transition to 'inactive' or 'active' state in the
+          dlurDlusTable.  This notification is only sent for row creation
+          if the row is created with a value of 'active' for
+          dlurDlusSessnStatus.  This notification is only sent for
+          row deletion if the last value of dlurDlusSessnStatus was
+          'active'.  In this case, the value of dlurDlusSessnStatus
+          in the notification shall be 'inactive', since the deletion of
+          a row indicates that the session is no longer active.
+
+          The notification is more than a simple 'poll me now' indication.
+          It carries both a count of DLUR-DLUS table changes, and the
+          session status itself.  The count of changes allows an
+          application to detect lost notifications, either when polling
+          or upon receiving a subsequent notification, at which point it
+          knows it must retrieve the entire dlurDlusTable again.
+
+          Generation of this notification is controlled by the
+          appnTrapControl object."
+      ::= { appnTrapMIB 6 }
+
+-- *********************************************************************
+-- Supporting Objects
+-- *********************************************************************
+
+appnTrapObjects              OBJECT IDENTIFIER ::= { appnObjects 7 }
+
+appnTrapControl OBJECT-TYPE
+      SYNTAX BITS {
+                   appnLocalTgOperStateChangeTrap(0),
+                   appnLocalTgCpCpChangeTrap(1),
+                   appnPortOperStateChangeTrap(2),
+                   appnLsOperStateChangeTrap(3),
+                   dlurDlusStateChangeTrap(4)
+                   -- add other notification types here
+                  }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "An object to turn APPN notification generation on and off.
+          Setting a notification type's bit to 1 enables generation of
+          notifications of that type, subject to further filtering
+          resulting from entries in the snmpNotificationMIB.  Setting
+          this bit to 0 disables generation of notifications of that
+          type.
+
+          Note that generation of the appnIsrAccountingDataTrap is
+          controlled by the appnIsInGlobeCtrAdminStatus object in
+          the APPN MIB:  if counts of intermediate session traffic
+          are being kept at all, then the notification is also enabled."
+      ::= { appnTrapObjects 1 }
+
+appnLocalTgTableChanges OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A count of the number of times a row in the appnLocalTgTable
+          has changed status since the APPN node was last reinitialized.
+          This counter is incremented whenever a condition is detected
+          that would cause a appnLocalTgOperStateChangeTrap or
+          appnLocalTgCpCpChangeTrap notification to be sent, whether
+          or not those notifications are enabled."
+      ::= { appnTrapObjects 2 }
+
+appnPortTableChanges OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A count of the number of times a row in the appnPortTable
+          has changed status since the APPN node was last reinitialized.
+          This counter is incremented whenever a condition is detected
+          that would cause a appnPortOperStateChangeTrap notification
+          to be sent, whether or not this notification is enabled."
+      ::= { appnTrapObjects 3 }
+
+appnLsTableChanges OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A count of the number of times a row in the appnLsTable
+          has changed status since the APPN node was last reinitialized.
+          This counter is incremented whenever a condition is detected
+          that would cause a appnLsOperStateChangeTrap notification
+          to be sent, whether or not this notification is enabled."
+      ::= { appnTrapObjects 4 }
+
+dlurDlusTableChanges OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A count of the number of times a row in the dlurDlusTable
+          has changed status since the APPN node was last reinitialized.
+          This counter is incremented whenever a condition is detected
+          that would cause a dlurDlusStateChangeTrap notification
+          to be sent, whether or not this notification is enabled."
+      ::= { appnTrapObjects 5 }
+
+-- *********************************************************************
+-- Conformance information
+-- *********************************************************************
+
+-- Tie into the conformance structure in the APPN MIB:
+-- appnConformance       OBJECT IDENTIFIER ::= {appnMIB 3 }
+--
+-- appnCompliances       OBJECT IDENTIFIER ::= {appnConformance 1 }
+-- appnGroups            OBJECT IDENTIFIER ::= {appnConformance 2 }
+
+-- Compliance statement
+appnTrapMibCompliance  MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+           "The compliance statement for the SNMP entities that
+           implement the APPN-TRAP-MIB."
+
+       MODULE  -- this module
+
+--     Conditionally mandatory groups
+           GROUP appnTrapMibIsrNotifGroup
+           DESCRIPTION
+               "This group is mandatory for APPN nodes supporting
+               reporting of final ISR counter values via notifications."
+
+           GROUP appnTrapMibTopoConfGroup
+           DESCRIPTION
+               "This group is mandatory for APPN nodes supporting
+               polling reduction for local topology."
+
+           GROUP appnTrapMibTopoNotifGroup
+           DESCRIPTION
+               "This group is mandatory for APPN nodes supporting
+               polling reduction for local topology."
+
+           GROUP appnTrapMibDlurConfGroup
+           DESCRIPTION
+               "This group is mandatory for APPN nodes supporting
+               polling reduction for the dlurDlusTable."
+
+           GROUP appnTrapMibDlurNotifGroup
+           DESCRIPTION
+               "This group is mandatory for APPN nodes supporting
+               polling reduction for the dlurDlusTable."
+
+           OBJECT appnTrapControl
+               MIN-ACCESS  read-only
+               DESCRIPTION
+                   "An agent is not required to support a set to
+                   this object."
+       ::= {appnCompliances 2 }
+
+-- Units of conformance
+appnTrapMibIsrNotifGroup    NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                       appnIsrAccountingDataTrap
+                      }
+        STATUS  current
+        DESCRIPTION
+            "A notification for reporting the final values of the
+            APPN MIB's ISR counters."
+        ::= { appnGroups 21 }
+
+appnTrapMibTopoConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                  appnTrapControl,
+                  appnLocalTgTableChanges,
+                  appnPortTableChanges,
+                  appnLsTableChanges
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects for reducing the polling
+            associated with the local topology tables in the
+            APPN MIB.  Nodes that implement this group SHALL
+            also implement the appnTrapMibTopoNotifGroup."
+        ::= { appnGroups 22 }
+
+appnTrapMibTopoNotifGroup    NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                       appnLocalTgOperStateChangeTrap,
+                       appnLocalTgCpCpChangeTrap,
+                       appnPortOperStateChangeTrap,
+                       appnLsOperStateChangeTrap
+
+                      }
+        STATUS  current
+        DESCRIPTION
+            "A collection of notifications for reducing the polling
+            associated with the local topology tables in the
+            APPN MIB.  Nodes that implement this group SHALL
+            also implement the appnTrapMibTopoConfGroup."
+        ::= { appnGroups 23 }
+
+appnTrapMibDlurConfGroup  OBJECT-GROUP
+        OBJECTS  {
+                  appnTrapControl,
+                  dlurDlusTableChanges
+                 }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects for reducing the polling
+            associated with the dlurDlusTable in the DLUR
+            MIB.  Nodes that implement this group SHALL also
+            implement the appnTrapMibDlurNotifGroup."
+        ::= { appnGroups 24 }
+
+appnTrapMibDlurNotifGroup    NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                       dlurDlusStateChangeTrap
+                      }
+        STATUS  current
+        DESCRIPTION
+            "A notification for reducing the polling associated
+            with the dlurDlusTable in the DLUR MIB.  Nodes that
+            implement this group SHALL also implement the
+            appnTrapMibDlurConfGroup."
+        ::= { appnGroups 25 }
+
+END
diff --git a/snmp_builder/mibs/APS-MIB.mib b/snmp_builder/mibs/APS-MIB.mib
new file mode 100644
index 0000000..b2dd6a3
--- /dev/null
+++ b/snmp_builder/mibs/APS-MIB.mib
@@ -0,0 +1,1659 @@
+APS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE,
+        Gauge32, Counter32, Integer32, transmission
+                FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION, RowStatus,
+        TimeStamp, StorageType
+                FROM SNMPv2-TC
+
+        SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB
+
+        ifIndex, InterfaceIndex
+                FROM IF-MIB
+
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                FROM SNMPv2-CONF;
+
+apsMIB MODULE-IDENTITY
+    LAST-UPDATED        "200302280000Z"  -- February 28, 2003
+    ORGANIZATION        "IETF AToMMIB Working Group"
+    CONTACT-INFO
+        "       Jim Kuhfeld
+                Postal: RedBack Networks. Inc.
+                300 Holger Way
+                San Jose, CA 95134-1362
+                Tel: +1 408 750 5465
+                Email: jkuhfeld@redback.com
+
+                Jeff Johnson
+                Postal: RedBack Networks. Inc.
+                300 Holger Way
+                San Jose, CA 95134-1362
+                Tel: +1 408 750 5460
+                Email: jeff@redback.com
+
+                Michael Thatcher
+                Postal: RedBack Networks. Inc.
+                300 Holger Way
+                San Jose, CA 95134-1362
+                Tel: +1 408 750 5449
+                Email: thatcher@redback.com"
+    DESCRIPTION
+        "This management information module supports the configuration
+         and management of SONET linear APS groups. The definitions and
+         descriptions used in this MIB have been derived from
+         Synchronous Optical Network (SONET) Transport Systems:
+         Common Generic Criteria, GR-253-CORE Issue 3, September 2000,
+         section 5.3. The MIB is also consistent with the Multiplex
+         Section Protection (MSP) protocol as specified in ITU-T
+         Recommendation G.783, Characteristics of synchronous digital
+         hierarchy (SDH) equipment function blocks, Annex A and B.
+
+         Copyright (C) The Internet Society (2003).  This version of
+         this MIB module is part of RFC 3498; see the RFC itself for
+         full legal notices.
+         "
+
+    REVISION      "200302280000Z"  -- February 28, 2003
+    DESCRIPTION
+          "Initial version of this MIB, published as RFC 3498."
+        ::= { transmission 49 }
+
+apsMIBObjects OBJECT IDENTIFIER
+        ::= { apsMIB 1 }
+
+apsMIBNotifications OBJECT IDENTIFIER
+        ::= { apsMIB 2 }
+
+apsMIBConformance OBJECT IDENTIFIER
+        ::= { apsMIB 3 }
+
+ApsK1K2 ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This Textual Convention describes an object that stores
+         a SONET K1 and K2 byte APS protocol field.
+
+         K1 is located in the first octet, K2 is located in
+         the second octet. Bits are numbered from left to right.
+
+         Bits 1-4 of the K1 byte indicate a request.
+
+         1111  Lockout of Protection
+         1110  Forced Switch
+         1101  SF - High Priority
+         1100  SF - Low Priority
+         1011  SD - High Priority
+         1010  SD - Low Priority
+         1001  not used
+         1000  Manual Switch
+         0111  not used
+         0110  Wait-to-Restore
+         0101  not used
+         0100  Exercise
+         0011  not used
+         0010  Reverse Request
+         0001  Do Not Revert
+         0000  No Request
+
+         Bits 5-8 of the K1 byte indicate the channel associated with
+         the request defined in bits 1-4.
+
+         0000 is the Null channel.
+
+         1-14 are working channels.
+         15   is the extra traffic channel
+
+         Bits 1-4 of the K2 byte indicate a channel. The channel is
+         defined with the same syntax as K1 Bits 5-8.
+
+         Bit 5 of the K2 byte indicates the
+         architecture.
+
+         0 if the architecture is 1+1
+         1 if the architecture is 1:n
+
+         Bits 6-8 of the K2 byte indicates the mode.
+
+         000 - 011 are reserved for future use
+         100  indicates the mode is unidirectional
+         101  indicates the mode is bidirectional
+         110  RDI-L
+         111  AIS-L
+        "
+    REFERENCE
+        "Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3,
+        September 2000, 5.3.5."
+    SYNTAX      OCTET STRING (SIZE (2))
+
+ApsSwitchCommand ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "An APS switch command allows a user to perform protection
+         switch actions.
+
+         If the APS switch command cannot be executed because an
+         equal or higher priority request is in effect, an
+         inconsistentValue error is returned.
+
+         The Switch command values are:
+
+         noCmd
+
+         This value should be returned by a read request when no switch
+         command has been written to the object in question since
+         initialization. This value may not be used in a write
+         operation.  If noCmd is used in a write operation a wrongValue
+         error is returned.
+
+         clear
+
+         Clears all of the switch commands listed below for the
+         specified channel.
+
+         lockoutOfProtection
+
+         Prevents any of the working channels from switching to the
+         protection line. The specified channel should be the protection
+         channel, otherwise an inconsistentValue error is returned.
+
+         forcedSwitchWorkToProtect
+
+         Switches the specified working channel to the protection line.
+         If the protection channel is specified an inconsistentValue
+         error is returned.
+
+         forcedSwitchProtectToWork
+
+         Switches the working channel back from the protection
+         line to the working line. The specified channel should be
+         the protection channel, otherwise an inconsistentValue
+         error is returned.
+
+         manualSwitchWorkToProtect
+
+         Switches the specified working channel to the protection line.
+         If the protection channel is specified an inconsistentValue
+         error is returned.
+
+         manualSwitchProtectToWork
+
+         Switches the working channel back from the protection
+         line to the working line. The specified channel should be
+         the protection channel, otherwise an inconsistentValue
+         error is returned.
+
+         exercise
+
+         Exercises the protocol for a protection switch of the specified
+         channel by issuing an Exercise request for that channel and
+         checking the response on the APS channel. "
+    SYNTAX       INTEGER {
+                     noCmd(1),
+                     clear(2),
+                     lockoutOfProtection(3),
+                     forcedSwitchWorkToProtect(4),
+                     forcedSwitchProtectToWork(5),
+                     manualSwitchWorkToProtect(6),
+                     manualSwitchProtectToWork(7),
+                     exercise(8)
+                 }
+
+ApsControlCommand ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "An APS control command applies only to LTE that support the
+         1:n architecture and performs the following actions.
+
+         The Control command values are:
+
+         noCmd
+
+         This value should be returned by a read request when no control
+         command has been written to the object in question since
+         initialization. This value may not be used in a write
+         operation.  If noCmd is used in a write operation a wrongValue
+         error is returned.
+
+         lockoutWorkingChannel
+
+         Prevents the specified working channel from switching to the
+         protection line. If the protection line is specified an
+         inconsistentValue error is returned.
+
+         clearLockoutWorkingChannel
+
+         Clears the lockout a working channel command for the channel
+         specified. If the protection line is specified an
+         inconsistentValue error is returned."
+    SYNTAX       INTEGER {
+                     noCmd(1),
+                     lockoutWorkingChannel(2),
+                     clearLockoutWorkingChannel(3)
+                 }
+
+--
+-- APS Configuration Table
+--
+-- This table supports the addition, configuration and deletion of APS
+-- groups.
+--
+
+apsConfig     OBJECT IDENTIFIER ::= { apsMIBObjects 1 }
+
+apsConfigGroups OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The count of APS groups. This count includes all rows in
+         apsConfigTable, regardless of the value of apsConfigRowStatus."
+    ::= { apsConfig 1 }
+
+apsConfigTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApsConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the APS groups that have been configured
+         on the system."
+    ::= { apsConfig 2 }
+
+apsConfigEntry OBJECT-TYPE
+    SYNTAX      ApsConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apsConfigTable."
+    INDEX { IMPLIED apsConfigName }
+    ::= { apsConfigTable  1 }
+
+ApsConfigEntry ::= SEQUENCE {
+    apsConfigName                  SnmpAdminString,
+    apsConfigRowStatus             RowStatus,
+    apsConfigMode                  INTEGER,
+    apsConfigRevert                INTEGER,
+    apsConfigDirection             INTEGER,
+    apsConfigExtraTraffic          INTEGER,
+    apsConfigSdBerThreshold        Integer32,
+    apsConfigSfBerThreshold        Integer32,
+    apsConfigWaitToRestore         Integer32,
+    apsConfigCreationTime          TimeStamp,
+    apsConfigStorageType           StorageType
+}
+
+apsConfigName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A textual name for the APS group."
+    ::= { apsConfigEntry 1 }
+
+apsConfigRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this APS group entry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value. Also,
+        all associated apsChanConfigEntry rows must represent
+        a set of consecutive channel numbers beginning with
+        0 or 1, depending on the selected architecture.
+
+        When set to notInService changes may be made to apsConfigMode,
+        apsConfigRevert, apsConfigDirection, apsConfigExtraTraffic,
+        apsConfigSdBerThreshold, apsConfigSfBerThreshold,
+        and apsConfigWaitToRestore. Also, associated apsChanConfigTable
+        objects may be added, deleted and modified."
+    ::= { apsConfigEntry 2 }
+
+apsConfigMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                        onePlusOne(1),
+                        oneToN(2),
+                        onePlusOneCompatible(3),
+                        onePlusOneOptimized(4)
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The architecture of the APS group.
+
+        onePlusOne
+
+        The 1+1 architecture permanently bridges the working
+        line to the protection line.
+
+        oneToN
+
+        The 1:n architecture allows one protection channel to
+        protect up to n working channels. When a fault is detected
+        on one of the n working channels that channel is bridged
+        over the protection channel.
+
+        onePlusOneCompatible
+
+        This refers to 1 + 1 bidirectional switching compatible with
+        1:n bidirectional switching as specified in ITU-T
+        Recommendation G.783 (04/97) section A.3.4.1. Since this
+        mode necessitates bidirectional switching, apsConfigDirection
+        must be set to bidirectional whenever onePlusOneCompatible
+        is set.
+
+        onePlusOneOptimized
+
+        This refers to 1 + 1 bidirectional switching optimized
+        for a network using predominantly 1 + 1 bidirectional
+        switching as specified in ITU-T Recommendation G.783 (04/97)
+        section B.1. Since this mode necessitates bidirectional
+        switching, apsConfigDirection must be set to bidirectional
+        whenever onePlusOneOptimized is set.
+
+        This object may not be modified if the associated
+        apsConfigRowStatus object is equal to active(1)."
+    DEFVAL {onePlusOne}
+    ::= { apsConfigEntry 3 }
+
+apsConfigRevert OBJECT-TYPE
+    SYNTAX      INTEGER { nonrevertive(1), revertive(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The revertive mode of the APS group.
+
+        nonrevertive
+
+        Traffic remains on the protection line until another switch
+        request is received.
+
+        revertive
+
+        When the condition that caused a switch to the protection
+        line has been cleared the signal is switched back to the
+        working line. Since switching is revertive with the 1:n
+        architecture, apsConfigRevert must be set to revertive if
+        apsConfigMode is set to oneToN.
+
+        Switching may optionally be revertive with the 1+1 architecture.
+
+        This object may not be modified if the associated
+        apsConfigRowStatus object is equal to active(1). "
+    DEFVAL { nonrevertive }
+    ::= { apsConfigEntry 4 }
+
+apsConfigDirection OBJECT-TYPE
+    SYNTAX      INTEGER { unidirectional(1), bidirectional(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The directional mode of the APS group.
+
+        unidirectional
+
+        The unidirectional mode provides protection in one direction.
+
+        bidirectional
+
+        The bidirectional mode provides protection in both
+        directions.
+
+        This object may not be modified if the associated
+        apsConfigRowStatus object is equal to active(1). "
+    DEFVAL {unidirectional}
+    ::= { apsConfigEntry 5 }
+
+apsConfigExtraTraffic OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This object enables or disables the transfer of extra traffic
+        on the protection channel in a 1:n architecture. This object
+        must be set to disabled if the architecture is 1+1. It may be
+        necessary to disable this in order to interwork with other SONET
+        network elements that don't support extra traffic.
+
+        This object may not be modified if the associated
+        apsConfigRowStatus object is equal to active(1). "
+    DEFVAL { disabled }
+    ::= { apsConfigEntry 6 }
+
+apsConfigSdBerThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (5..9)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Signal Degrade Bit Error Rate.
+
+         The negated value of this number is used as the exponent of
+         10 for computing the threshold value for the Bit Error Rate
+         (BER). For example, a value of 5 indicates a BER threshold of
+         10^-5.
+
+         This object may be modified if the associated
+         apsConfigRowStatus object is equal to active(1)."
+    DEFVAL { 5 }
+    ::= { apsConfigEntry 7 }
+
+apsConfigSfBerThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (3..5)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Signal Failure Bit Error Rate.
+
+         The negated value of this number is used as the exponent of
+         10 for computing the threshold value for the Bit Error Rate
+         (BER). For example, a value of 5 indicates a BER threshold of
+         10^-5.
+
+         This object may be modified if the associated
+         apsConfigRowStatus object is equal to active(1)."
+    DEFVAL { 3 }
+    ::= { apsConfigEntry 8 }
+
+apsConfigWaitToRestore OBJECT-TYPE
+    SYNTAX      Integer32 (0..720)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Wait To Restore period in seconds.
+
+         After clearing of a condition that necessitated an
+         automatic switch, the wait to restore period must elapse
+         before reverting. This is intended to avoid rapid switch
+         oscillations.
+
+         GR-253-CORE specifies a Wait To Restore range of 5 to 12
+         minutes. G.783 defines a 5 to 12 minute Wait To Restore
+         range in section 5.4.1.1.3, but also allows for a shorter
+         WTR period in  Table 2-1,
+         WaitToRestore value (MI_WTRtime: 0..(5)..12 minutes).
+
+         This object may not be modified if the associated
+         apsConfigRowStatus object is equal to active(1)."
+    DEFVAL { 300 }
+    ::= { apsConfigEntry 9 }
+
+apsConfigCreationTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time the row was
+         created"
+    ::= { apsConfigEntry 10 }
+
+apsConfigStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL      { nonVolatile }
+    ::= { apsConfigEntry 11 }
+
+--
+-- APS Status Table
+--
+-- This table provides APS group statistics.
+--
+
+apsStatusTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApsStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table provides status information about APS groups
+         that have been configured on the system."
+    ::= { apsMIBObjects 2 }
+
+apsStatusEntry OBJECT-TYPE
+    SYNTAX      ApsStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apsStatusTable."
+    AUGMENTS { apsConfigEntry }
+    ::= { apsStatusTable  1 }
+
+ApsStatusEntry ::= SEQUENCE {
+    apsStatusK1K2Rcv               ApsK1K2,
+    apsStatusK1K2Trans             ApsK1K2,
+    apsStatusCurrent               BITS,
+    apsStatusModeMismatches        Counter32,
+    apsStatusChannelMismatches     Counter32,
+    apsStatusPSBFs                 Counter32,
+    apsStatusFEPLFs                Counter32,
+    apsStatusSwitchedChannel       Integer32,
+    apsStatusDiscontinuityTime     TimeStamp
+}
+
+apsStatusK1K2Rcv OBJECT-TYPE
+    SYNTAX      ApsK1K2
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current value of the K1 and K2 bytes received on the
+         protection channel."
+    ::= { apsStatusEntry 1 }
+
+apsStatusK1K2Trans OBJECT-TYPE
+    SYNTAX        ApsK1K2
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The current value of the K1 and K2 bytes transmitted on the
+         protection channel."
+    ::= { apsStatusEntry 2 }
+
+apsStatusCurrent OBJECT-TYPE
+    SYNTAX      BITS {
+                  modeMismatch(0),
+                  channelMismatch(1),
+                  psbf(2),
+                  feplf(3),
+                  extraTraffic(4)
+                 }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current status of the APS group.
+
+         modeMismatch
+
+         Modes other than 1+1 unidirectional monitor protection line
+         K2 bit 5, which indicates the architecture and K2 bits
+         6-8, which indicate if the mode is unidirectional or
+         bidirectional. A conflict between the current local mode
+         and the received K2 mode information constitutes a
+         mode mismatch.
+
+         channelMismatch
+
+         This bit indicates a  mismatch between the transmitted K1
+         channel and the received K2 channel has been detected.
+
+         psbf
+
+         This bit indicates a Protection Switch Byte Failure (PSBF) is
+         in effect. This condition occurs when either an inconsistent
+         APS byte or an invalid code is detected. An inconsistent APS
+         byte occurs when no three consecutive K1 bytes of the last 12
+         successive frames are identical, starting with the last frame
+         containing a previously consistent byte. An invalid code occurs
+         when the incoming K1 byte contains an unused code or a code
+         irrelevant for the specific switching operation (e.g., Reverse
+         Request while no switching request is outstanding) in three
+         consecutive frames. An invalid code also occurs when the
+         incoming K1 byte contains an invalid channel number in three
+         consecutive frames.
+
+         feplf
+
+         Modes other than 1+1 unidirectional monitor the K1 byte
+         for Far-End Protection-Line failures. A Far-End
+         Protection-Line defect is declared based on receiving
+         SF on the protection line.
+
+         extraTraffic
+
+         This bit indicates whether extra traffic is currently being
+         accepted on the protection line. "
+    ::= { apsStatusEntry 3 }
+
+apsStatusModeMismatches OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A count of Mode Mismatch conditions.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsStatusDiscontinuityTime."
+    ::= { apsStatusEntry 4 }
+
+apsStatusChannelMismatches OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A count of Channel Mismatch conditions.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsStatusDiscontinuityTime."
+    ::= { apsStatusEntry 5 }
+
+apsStatusPSBFs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A count of Protection Switch Byte Failure conditions.
+         This condition occurs when either an inconsistent APS
+         byte or an invalid code is detected. An inconsistent APS
+         byte occurs when no three consecutive K1 bytes of the last
+         12 successive frames are identical, starting with the last
+         frame containing a previously consistent byte. An invalid
+         code occurs when the incoming K1 byte contains an unused
+         code or a code irrelevant for the specific switching
+         operation (e.g., Reverse Request while no switching request
+         is outstanding) in three consecutive frames. An invalid code
+         also occurs when the incoming K1 byte contains an invalid
+         channel number in three consecutive frames.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsStatusDiscontinuityTime."
+    ::= { apsStatusEntry 6 }
+
+apsStatusFEPLFs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A count of Far-End Protection-Line Failure conditions.
+         This condition is declared based on receiving SF on
+         the protection line in the K1 byte.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsStatusDiscontinuityTime."
+    ::= { apsStatusEntry 7 }
+
+apsStatusSwitchedChannel OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This field is set to the number of the channel that is
+         currently switched to protection. The value 0 indicates no
+         channel is switched to protection. The values 1-14 indicate
+         that working channel is switched to protection."
+    ::= { apsStatusEntry 8 }
+
+apsStatusDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at which
+         any one or more of this APS group's counters suffered a
+         discontinuity.  The relevant counters are the specific
+         instances associated with this APS group of any Counter32
+         object contained in apsStatusTable. If no such
+         discontinuities have occurred since the last re-initialization
+         of the local management subsystem, then this object contains
+         a zero value."
+    ::= { apsStatusEntry 9 }
+
+--
+-- APS Map Group
+--
+-- Lists the SONET LTE interfaces that may be used to create APS groups.
+--
+
+apsMap      OBJECT IDENTIFIER ::= { apsMIBObjects 3 }
+
+apsChanLTEs OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The count of SONET LTE interfaces on the system.
+         Each interface that is included has an ifType value of
+         sonet(39)."
+    ::= { apsMap 1 }
+
+apsMapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApsMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the SONET LTE interfaces on the system.
+         Each interface that is listed has an ifType value of
+         sonet(39)."
+    ::= { apsMap 2 }
+
+apsMapEntry OBJECT-TYPE
+    SYNTAX      ApsMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apsMapTable."
+    INDEX { ifIndex }
+    ::= { apsMapTable  1 }
+
+ApsMapEntry ::= SEQUENCE {
+    apsMapGroupName             SnmpAdminString,
+    apsMapChanNumber            Integer32
+}
+
+apsMapGroupName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A textual name for the APS group which this channel is
+         included in. If the channel is not part of an APS group
+         this value is set to a string of size 0.
+
+         When an instance of apsChanConfigIfIndex is set equal to an
+         instance of ifIndex that has an ifType value of sonet(39),
+         apsMapGroupName is set equal to the corresponding value of
+         apsChanConfigGroupName.
+
+         If an instance of ifIndex that has an ifType value of
+         sonet(39) ceases to be equal to an instance of
+         apsChanConfigIfIndex, either because of a change in the value
+         of apsChanConfigIfIndex, or because of row deletion in the
+         ApsChanConfigTable, apsMapGroupName is set to a string of
+         size 0."
+    ::= { apsMapEntry 2 }
+
+apsMapChanNumber OBJECT-TYPE
+    SYNTAX     Integer32 (-1..14)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This field is set to a unique channel number within an APS
+         group.  The value 0 indicates the null channel. The values
+         1-14 define a working channel. If the SONET LTE is not part
+         of an APS group this value is set to -1.
+
+         When an instance of apsChanConfigIfIndex is set equal to an
+         instance of ifIndex that has an  ifType value of sonet(39),
+         apsMapChanNumber is set equal to the corresponding value of
+         apsChanConfigNumber.
+
+         If an instance of ifIndex that has an  ifType value of
+         sonet(39) ceases to be equal to an instance of
+         apsChanConfigIfIndex, either because of a change in the
+         value of apsChanConfigIfIndex, or because of row deletion
+         in the ApsChanConfigTable, apsMapChanNumber is set to -1."
+    ::= { apsMapEntry 3 }
+
+--
+-- APS Channel Configuration Table
+--
+-- This table supports the addition, configuration and deletion of
+-- channels in APS groups.
+--
+
+apsChanConfigTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApsChanConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the APS channels that have been configured
+         in APS groups."
+    ::= { apsMIBObjects 4 }
+
+apsChanConfigEntry OBJECT-TYPE
+    SYNTAX      ApsChanConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apsChanConfigTable."
+    INDEX {apsChanConfigGroupName, apsChanConfigNumber}
+    ::= { apsChanConfigTable  1 }
+
+ApsChanConfigEntry ::= SEQUENCE {
+    apsChanConfigGroupName             SnmpAdminString,
+    apsChanConfigNumber                Integer32,
+    apsChanConfigRowStatus             RowStatus,
+    apsChanConfigIfIndex               InterfaceIndex,
+    apsChanConfigPriority              INTEGER,
+    apsChanConfigStorageType           StorageType
+}
+
+apsChanConfigGroupName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A textual name for the APS group which this channel is
+         included in."
+    ::= { apsChanConfigEntry 1 }
+
+apsChanConfigNumber OBJECT-TYPE
+    SYNTAX     Integer32 (0..14)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This field is set to a unique channel number within an APS
+         group.  The value 0 indicates the null channel.  The values
+         1-14 define a working channel.
+
+         This field must be assigned a unique number within the group."
+    ::= { apsChanConfigEntry 2 }
+
+apsChanConfigRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this APS channel entry.
+
+         An entry may not exist in the active state unless all
+         objects in the entry have an appropriate value.
+
+         A row in the apsChanConfigTable may not be created,
+         deleted, set to notInService or otherwise modified
+         if the apsChanConfigGroupName value is equal to an
+         apsConfigName value and the associated apsConfigRowStatus
+         object is equal to active. However, if the apsConfigRowStatus
+         object is equal to notInService, a row may be created, deleted
+         or modified. In other words, a channel may not be added,
+         deleted or modified if the group is active.
+
+         A row may be created with an apsChanConfigGroupName value
+         that is not equal to any existing instance of apsConfigName.
+         This action is the initial step in adding a SONET LTE to a
+         new APS group.
+
+         If this object is set to destroy, the associated instance
+         of apsMapGroupName will be set to a string of size 0 and
+         the apsMapChanNumber will be set to -1. The channel status
+         entry will also be deleted by this action.
+
+         apsChanConfigNumber must be set to a unique channel number
+         within the APS group. The value 0 indicates the null channel.
+         The values 1-14 define a working channel. When an attempt is
+         made to set the  corresponding apsConfigRowStatus field to
+         active the apsChanConfigNumber values of all entries with equal
+         apsChanConfigGroupName fields must represent a set of
+         consecutive integer values beginning with 0 or 1, depending on
+         the architecture of the group, and ending with n, where n is
+         greater than or equal to 1 and less than or equal to 14.
+         Otherwise, the error inconsistentValue is returned to the
+         apsConfigRowStatus set attempt."
+    ::= { apsChanConfigEntry 3 }
+
+apsChanConfigIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The Interface Index assigned to a SONET LTE. This is an
+         interface with ifType sonet(39). The value of this object
+         must be unique among all instances of apsChanConfigIfIndex.
+         In other words, a particular SONET LTE can only be configured
+         in one APS group.
+
+         This object cannot be set if the apsChanConfigGroupName
+         instance associated with this row is equal to an instance of
+         apsConfigName and the corresponding apsConfigRowStatus object
+         is set to active.  In other words this value cannot be changed
+         if the APS group is active. However, this value may be changed
+         if the apsConfigRowStatus value is equal to notInService."
+    ::= { apsChanConfigEntry 4 }
+
+apsChanConfigPriority OBJECT-TYPE
+    SYNTAX     INTEGER {low(1), high(2)}
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The priority of the channel.
+
+         This field determines whether high or low priority
+         SD and SF codes are used in K1 requests.
+
+         This field is only applicable if the channel is to be included
+         in a group using the 1:n architecture. It is not applicable if
+         the channel is to be included in a group using the 1+1
+         architecture, and is ignored in that case.
+
+         This object cannot be set if the apsChanConfigGroupName
+         instance associated with this row is equal to an instance of
+         apsConfigName and the corresponding apsConfigRowStatus object
+         is set to active.  In other words this value cannot be changed
+         if the APS group is active.  However, this value may be changed
+         if the apsConfigRowStatus value is equal to notInService."
+    DEFVAL { low }
+    ::= { apsChanConfigEntry 5 }
+
+apsChanConfigStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { apsChanConfigEntry 6 }
+
+--
+-- APS Command Table
+--
+-- This table provides the ability to initiate APS commands.
+--
+
+apsCommandTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApsCommandEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table allows commands to be sent to configured APS
+          groups."
+    ::= { apsMIBObjects 5 }
+
+apsCommandEntry OBJECT-TYPE
+    SYNTAX      ApsCommandEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apsCommandTable. This row exists only
+         if the associated apsConfigEntry is active."
+    INDEX {apsChanConfigGroupName, apsChanConfigNumber}
+    ::= { apsCommandTable  1 }
+
+ApsCommandEntry ::= SEQUENCE {
+    apsCommandSwitch         ApsSwitchCommand,
+    apsCommandControl        ApsControlCommand
+}
+
+apsCommandSwitch OBJECT-TYPE
+    SYNTAX      ApsSwitchCommand
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Allows the initiation of an APS switch command on the
+         APS group and channel specified by the index values.
+
+         When read this object returns the last command written
+         or noCmd if no command has been written to this
+         channel since initialization. The return of the last command
+         written does not imply that this command is currently in
+         effect.  This request may have been preempted by a higher
+         priority local or remote request. In order to determine the
+         current state of the APS group it is necessary to read
+         the objects apsStatusK1K2Rcv and apsStatusK1K2Trans.
+
+         The value lockoutOfProtection should only be applied to the
+         protection line channel since that switch command prevents any
+         of the working channels from switching to the protection line.
+         Following the same logic, forcedSwitchProtectToWork and
+         manualSwitchProtectToWork should only be applied to the
+         protection line channel.
+
+         forcedSwitchWorkToProtect and manualSwitchWorkToProtect
+         should only be applied to a working channel."
+    ::= { apsCommandEntry 1 }
+
+apsCommandControl OBJECT-TYPE
+    SYNTAX      ApsControlCommand
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Allows the initiation of an APS control command on the
+         APS group and channel specified by the index values.
+
+         When read this object returns the last command written or
+         noCmd if no command has been written to this channel since
+         initialization.
+
+         This object does not apply to the protection line."
+    ::= { apsCommandEntry 2 }
+
+--
+-- APS Channel Status Table
+--
+-- This table provides APS channel statistics.
+--
+
+apsChanStatusTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ApsChanStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains status information for all SONET LTE
+         interfaces that are included in APS groups."
+    ::= { apsMIBObjects 6 }
+
+apsChanStatusEntry OBJECT-TYPE
+    SYNTAX      ApsChanStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the apsChanStatusTable."
+    AUGMENTS { apsChanConfigEntry }
+    ::= { apsChanStatusTable  1 }
+
+ApsChanStatusEntry ::= SEQUENCE {
+    apsChanStatusCurrent               BITS,
+    apsChanStatusSignalDegrades        Counter32,
+    apsChanStatusSignalFailures        Counter32,
+    apsChanStatusSwitchovers           Counter32,
+    apsChanStatusLastSwitchover        TimeStamp,
+    apsChanStatusSwitchoverSeconds     Counter32,
+    apsChanStatusDiscontinuityTime     TimeStamp
+}
+
+apsChanStatusCurrent OBJECT-TYPE
+    SYNTAX     BITS {
+               lockedOut(0),
+               sd(1),
+               sf(2),
+               switched(3),
+               wtr(4)
+
+            }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Indicates the current state of the port.
+
+         lockedOut
+
+         This bit, when applied to a working channel, indicates that
+         the channel is prevented from switching to the protection
+         line.  When applied to the null channel, this bit indicates
+         that no working channel may switch to the protection line.
+
+         sd
+
+         A signal degrade condition is in effect.
+
+         sf
+
+         A signal failure condition is in effect.
+
+         switched
+
+         The switched bit is applied to a working channel if that
+         channel is currently switched to the protection line.
+
+         wtr
+
+         A Wait-to-Restore state is in effect."
+    ::= { apsChanStatusEntry 1 }
+
+apsChanStatusSignalDegrades OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A count of Signal Degrade conditions. This condition
+         occurs when the line Bit Error Rate exceeds the currently
+         configured value of the relevant instance of
+         apsConfigSdBerThreshold.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsChanStatusDiscontinuityTime."
+    ::= { apsChanStatusEntry 2 }
+
+apsChanStatusSignalFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A count of Signal Failure conditions that have been
+         detected on the incoming signal. This condition occurs
+         when a loss of signal, loss of frame, AIS-L or a Line
+         bit error rate exceeding the currently configured value of
+         the relevant instance of apsConfigSfBerThreshold.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsChanStatusDiscontinuityTime."
+    ::= { apsChanStatusEntry 3 }
+
+apsChanStatusSwitchovers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "When queried with index value apsChanConfigNumber other than
+         0, this object will return the number of times this channel
+         has switched to the protection line.
+
+         When queried with index value apsChanConfigNumber set to 0,
+         which is the protection line, this object will return the
+         number of times that any working channel has been switched
+         back to the working line from this protection line.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsChanStatusDiscontinuityTime."
+    ::= { apsChanStatusEntry 4 }
+
+apsChanStatusLastSwitchover OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "When queried with index value apsChanConfigNumber other than
+         0, this object will return the value of sysUpTime when this
+         channel last completed a switch to the protection line. If
+
+         this channel has never switched to the protection line, the
+         value 0 will be returned.
+
+         When queried with index value apsChanConfigNumber set to 0,
+         which is the protection line, this object will return the
+         value of sysUpTime the last time that a working channel was
+         switched back to the working line from this protection line.
+         If no working channel has ever switched back to the working
+         line from this protection line, the value 0 will be returned."
+    ::= { apsChanStatusEntry 5 }
+
+apsChanStatusSwitchoverSeconds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The cumulative Protection Switching Duration (PSD) time in
+         seconds. For a working channel, this is the cumulative number
+         of seconds that service was carried on the protection line.
+         For the protection line, this is the cumulative number of
+         seconds that the protection line has been used to carry any
+         working channel traffic. This information is only valid if
+         revertive switching is enabled. The value 0 will be returned
+         otherwise.
+
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         apsChanStatusDiscontinuityTime. For example, if the value
+         of an instance of apsChanStatusSwitchoverSeconds changes
+         from a non-zero value to zero due to revertive switching
+         being disabled, it is expected that the corresponding
+         value of apsChanStatusDiscontinuityTime will be updated
+         to reflect the time of the configuration change.
+         "
+    ::= { apsChanStatusEntry 6 }
+
+apsChanStatusDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at which
+         any one or more of this channel's counters suffered a
+         discontinuity.  The relevant counters are the specific
+         instances associated with this channel of any Counter32
+         object contained in apsChanStatusTable. If no such
+
+         discontinuities have occurred since the last re-initialization
+         of the local management subsystem, then this object contains
+         a zero value."
+    ::= { apsChanStatusEntry 7 }
+
+apsNotificationEnable OBJECT-TYPE
+    SYNTAX     BITS {
+               switchover(0),
+               modeMismatch(1),
+               channelMismatch(2),
+               psbf(3),
+               feplf(4)
+            }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Provides the ability to enable and disable notifications
+         defined in this MIB.
+
+         switchover
+
+         Indicates  apsEventSwitchover notifications
+         should be generated.
+
+         modeMismatch
+
+         Indicates  apsEventModeMismatch notifications
+         should be generated.
+
+         channelMismatch
+
+         Indicates  apsEventChannelMismatch notifications
+         should be generated.
+
+         psbf
+
+         Indicates  apsEventPSBF notifications
+         should be generated.
+
+         feplf
+
+         Indicates  apsEventFEPLF notifications
+         should be generated. "
+    DEFVAL { { } }
+    ::= { apsMIBObjects 7 }
+
+--
+-- APS EVENTS
+
+--
+
+apsNotificationsPrefix OBJECT IDENTIFIER
+        ::= { apsMIBNotifications 0 }
+
+apsEventSwitchover NOTIFICATION-TYPE
+    OBJECTS { apsChanStatusSwitchovers, apsChanStatusCurrent }
+    STATUS  current
+    DESCRIPTION
+        "An apsEventSwitchover notification is sent when the
+        value of an instance of apsChanStatusSwitchovers increments."
+    ::= { apsNotificationsPrefix 1 }
+
+apsEventModeMismatch NOTIFICATION-TYPE
+    OBJECTS { apsStatusModeMismatches, apsStatusCurrent }
+    STATUS  current
+    DESCRIPTION
+        "An apsEventModeMismatch notification is sent when the
+        value of an instance of apsStatusModeMismatches increments."
+    ::= { apsNotificationsPrefix 2 }
+
+apsEventChannelMismatch NOTIFICATION-TYPE
+    OBJECTS { apsStatusChannelMismatches, apsStatusCurrent }
+    STATUS  current
+    DESCRIPTION
+        "An apsEventChannelMismatch notification is sent when the
+        value of an instance of apsStatusChannelMismatches increments."
+    ::= { apsNotificationsPrefix 3 }
+
+apsEventPSBF NOTIFICATION-TYPE
+    OBJECTS { apsStatusPSBFs, apsStatusCurrent }
+    STATUS  current
+    DESCRIPTION
+        "An apsEventPSBF notification is sent when the
+        value of an instance of apsStatusPSBFs increments."
+    ::= { apsNotificationsPrefix 4 }
+
+apsEventFEPLF NOTIFICATION-TYPE
+    OBJECTS { apsStatusFEPLFs, apsStatusCurrent }
+    STATUS  current
+    DESCRIPTION
+        "An apsEventFEPLFs notification is sent when the
+        value of an instance of apsStatusFEPLFs increments."
+    ::= { apsNotificationsPrefix 5 }
+
+-- conformance information
+
+apsGroups      OBJECT IDENTIFIER ::= { apsMIBConformance 1 }
+apsCompliances OBJECT IDENTIFIER ::= { apsMIBConformance 2 }
+
+apsFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "When this MIB is implemented with support for read-create, then
+        such an implementation can claim read/write compliance. Linear
+        APS groups can then be both monitored and configured with this
+        MIB.
+
+        Note that An agent is not required to process SNMP Set Requests
+        that affect multiple control objects within this MIB. This is
+        intended to simplify the processing of Set Requests for the
+        various control tables by eliminating the possibility that a
+        single Set PDU will contain multiple varbinds which are in
+        conflict. "
+
+    MODULE
+    MANDATORY-GROUPS { apsConfigGeneral, apsStatusGeneral,
+                       apsChanGeneral }
+
+        OBJECT  apsConfigRowStatus
+        SYNTAX INTEGER { active(1) }
+        WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
+        DESCRIPTION
+            "Support for createAndWait and notInService is not
+             required."
+
+        OBJECT  apsChanConfigRowStatus
+        SYNTAX INTEGER { active(1) }
+        WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
+        DESCRIPTION
+            "Support for createAndWait and notInService is not
+             required."
+
+        GROUP       apsConfigWtr
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups supporting a configurable
+             WTR period."
+
+        GROUP       apsCommandOnePlusOne
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups implementing the linear
+
+             APS 1+1 architecture and supporting set operations."
+
+       GROUP       apsCommandOneToN
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups implementing the linear
+             APS 1:n architecture and supporting set operations."
+
+       GROUP       apsChanOneToN
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups implementing the linear
+             APS 1:n architecture."
+
+       GROUP       apsTotalsGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations."
+
+       GROUP       apsMapGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations."
+
+       GROUP       apsEventGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations."
+    ::= { apsCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+apsReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "When this MIB is implemented without support for read-create
+         (i.e. in read-only mode), then that implementation can claim
+         read-only compliance. In that case, linear APS groups can be
+         monitored but cannot be configured with this MIB."
+
+    MODULE
+    MANDATORY-GROUPS { apsConfigGeneral, apsStatusGeneral,
+                       apsChanGeneral }
+
+        OBJECT  apsConfigMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigRevert
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigDirection
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigExtraTraffic
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigSdBerThreshold
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigSfBerThreshold
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigWaitToRestore
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsConfigRowStatus
+        SYNTAX  INTEGER { active(1) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and active is the only status
+             that needs to be supported."
+
+        OBJECT  apsConfigStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsChanConfigIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsChanConfigPriority
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsChanConfigRowStatus
+        SYNTAX  INTEGER { active(1) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and active is the only status
+             that needs to be supported."
+
+        OBJECT  apsChanConfigStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT  apsNotificationEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP       apsConfigWtr
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups supporting a configurable
+             WTR period."
+
+        GROUP       apsCommandOnePlusOne
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups implementing the linear
+             APS 1+1 architecture and supporting set operations."
+
+       GROUP       apsCommandOneToN
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups implementing the linear
+             APS 1:n architecture and supporting set operations."
+
+       GROUP       apsChanOneToN
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations. The information is
+             applicable to groups implementing the linear
+             APS 1:n architecture."
+
+       GROUP       apsTotalsGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations."
+
+       GROUP       apsMapGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations."
+
+       GROUP       apsEventGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             linear APS implementations."
+    ::= { apsCompliances 2 }
+
+-- units of conformance
+
+apsConfigGeneral    OBJECT-GROUP
+    OBJECTS
+    {
+        apsConfigMode,
+        apsConfigRevert,
+        apsConfigDirection,
+        apsConfigExtraTraffic,
+        apsConfigSdBerThreshold,
+        apsConfigSfBerThreshold,
+        apsConfigCreationTime,
+        apsConfigRowStatus,
+        apsConfigStorageType,
+        apsNotificationEnable
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of apsConfigTable objects providing configuration
+         information applicable to all linear APS groups."
+    ::= { apsGroups 1 }
+
+apsConfigWtr    OBJECT-GROUP
+    OBJECTS
+    {
+
+        apsConfigWaitToRestore
+    }
+    STATUS  current
+    DESCRIPTION
+        "The apsConfigTable object that provides information which is
+         applicable to groups supporting a configurable WTR period."
+    ::= { apsGroups 2 }
+
+--  If set operations are not supported neither of the following two
+--  groups are implemented. If sets are supported only one of these
+--  groups is implemented for a linear APS group instance.
+
+apsCommandOnePlusOne    OBJECT-GROUP
+    OBJECTS
+    {
+        apsCommandSwitch
+    }
+    STATUS  current
+    DESCRIPTION
+        "The  apsCommandTable object which is applicable to groups
+         implementing the linear APS 1+1 architecture. Also, set
+         operations must be supported."
+    ::= { apsGroups 3 }
+
+apsCommandOneToN    OBJECT-GROUP
+    OBJECTS
+    {
+        apsCommandSwitch,
+        apsCommandControl
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of apsCommandTable objects which are applicable to
+         groups implementing the linear APS 1:n architecture. Also, set
+         operations must be supported."
+    ::= { apsGroups 4 }
+
+apsStatusGeneral    OBJECT-GROUP
+    OBJECTS
+    {
+        apsStatusK1K2Rcv,
+        apsStatusK1K2Trans,
+        apsStatusCurrent,
+        apsStatusModeMismatches,
+        apsStatusChannelMismatches,
+        apsStatusPSBFs,
+        apsStatusFEPLFs,
+        apsStatusSwitchedChannel,
+        apsStatusDiscontinuityTime
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of apsStatusTable objects providing status
+         information applicable to all linear APS groups."
+    ::= { apsGroups 5 }
+
+apsChanGeneral    OBJECT-GROUP
+    OBJECTS
+    {
+        apsChanConfigIfIndex,
+        apsChanConfigRowStatus,
+        apsChanConfigStorageType,
+        apsChanStatusCurrent,
+        apsChanStatusSignalDegrades,
+        apsChanStatusSignalFailures,
+        apsChanStatusSwitchovers,
+        apsChanStatusLastSwitchover,
+        apsChanStatusSwitchoverSeconds,
+        apsChanStatusDiscontinuityTime
+   }
+    STATUS  current
+    DESCRIPTION
+        "A collection of channel objects providing information
+         applicable to all linear APS channels."
+    ::= { apsGroups 6 }
+
+apsChanOneToN    OBJECT-GROUP
+    OBJECTS
+    {
+        apsChanConfigPriority
+    }
+    STATUS  current
+    DESCRIPTION
+        "The apsChanConfigTable object that provides information which
+         is only applicable to groups implementing the linear APS 1:n
+         architecture."
+    ::= { apsGroups 7 }
+
+apsTotalsGroup OBJECT-GROUP
+    OBJECTS
+    {
+        apsConfigGroups,
+        apsChanLTEs
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects providing optional counts of configured
+         APS groups and SONET LTE interfaces."
+    ::= { apsGroups 8 }
+
+apsMapGroup OBJECT-GROUP
+    OBJECTS
+    {
+        apsMapGroupName,
+        apsMapChanNumber
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of apsMapTable objects providing a mapping
+         from sonet(39) InterfaceIndex to group name and channel
+         number for assigned APS channels and a list of unassigned
+         sonet(39) interfaces."
+    ::= { apsGroups 9 }
+
+apsEventGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {apsEventSwitchover, apsEventModeMismatch,
+                   apsEventChannelMismatch, apsEventPSBF,
+                   apsEventFEPLF }
+    STATUS    current
+    DESCRIPTION
+        "A collection of SONET linear APS notifications."
+    ::= { apsGroups 10 }
+
+END
diff --git a/snmp_builder/mibs/ARC-MIB.mib b/snmp_builder/mibs/ARC-MIB.mib
new file mode 100644
index 0000000..c22e91e
--- /dev/null
+++ b/snmp_builder/mibs/ARC-MIB.mib
@@ -0,0 +1,396 @@
+ARC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, mib-2
+          FROM SNMPv2-SMI                           -- [RFC2578]
+  TEXTUAL-CONVENTION, RowStatus, StorageType
+          FROM SNMPv2-TC                            -- [RFC2579]
+  MODULE-COMPLIANCE, OBJECT-GROUP
+          FROM SNMPv2-CONF                          -- [RFC2580]
+  ResourceId
+          FROM ALARM-MIB;                           -- [RFC3877]
+
+arcMibModule MODULE-IDENTITY
+  LAST-UPDATED "200409090000Z"  -- September 09, 2004
+  ORGANIZATION "IETF Distributed Management Working Group"
+  CONTACT-INFO
+       "WG EMail:  disman@ietf.org
+              Subscribe: disman-request@ietf.org
+              http://www.ietf.org/html.charters/disman-charter.html
+
+        Chair:     Randy Presuhn
+                   E-mail: randy_presuhn@mindspring.com
+
+        Editor:    Hing-Kam Lam
+                   Lucent Technologies, 4C-616
+                   101 Crawfords Corner Road
+
+                   Holmdel, NJ 07733
+                   USA
+                   Tel: +1 732 949 8338
+                   E-mail: hklam@lucent.com"
+  DESCRIPTION
+    "The MIB module describes the objects for controlling a resource
+     in reporting alarm conditions that it detects.
+
+     Copyright (C) The Internet Society (2004).  This version
+     of this MIB module is part of RFC 3878;  see the RFC
+     itself for full legal notices."
+
+  REVISION  "200409090000Z"  -- September 09, 2004
+  DESCRIPTION
+       "Initial version, published as RFC 3878."
+  ::={ mib-2 117 }
+
+------------------
+-- TEXTUAL-CONVENTION
+------------------
+
+IANAItuProbableCauseOrZero ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "This TC can take any value of IANAItuProbableCause or 0.
+     IANAItuProbableCause is defined in the IANA-ITU-ALARM-TC
+     module, which is maintained at the IANA web site and
+     published in the Alarm MIB document (see RFC 3877)."
+  REFERENCE
+    "IANA-ITU-ALARM-TC MIB module as maintained at the IANA web site.
+     The initial module was also published in RFC 3877."
+--
+  SYNTAX  INTEGER (0..2147483647)
+
+------------------
+-- MIB Objects
+------------------
+
+arcTimeIntervals   OBJECT IDENTIFIER ::= { arcMibModule 1 }
+arcObjects         OBJECT IDENTIFIER ::= { arcMibModule 2 }
+
+arcTITimeInterval OBJECT-TYPE
+  SYNTAX  Unsigned32
+  UNITS       "seconds"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "This variable indicates the time interval used for the nalmTI
+     state, in units of second.  It is a pre-defined length of time
+     in which the resource will stay in the nalmTI state before
+     transition into the alm state.
+
+     Instances of this object SHOULD persist across agent restarts."
+  ::= { arcTimeIntervals 1 }
+
+arcCDTimeInterval OBJECT-TYPE
+  SYNTAX  Unsigned32
+  UNITS       "seconds"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "This variable indicates the time interval used for the nalmQICD
+     state, in units of second.  It is a pre-defined length of time
+     in which the resource will stay in the nalmQICD state before
+     transition into the alm state after it is problem-free.
+
+     Instances of this object SHOULD persist across agent restarts."
+  ::= { arcTimeIntervals 2 }
+
+arcTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF ArcEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of Alarm Reporting Control (ARC) settings on the system.
+
+     Alarm Reporting Control is a feature that provides an automatic
+     in-service provisioning capability.  Alarm reporting is turned
+     off on a per-resource basis for a selective set of potential
+     alarm conditions to allow sufficient time for customer testing
+     and other maintenance activities in an 'alarm free' state.
+     Once a resource is ready for service, alarm reporting is
+     automatically or manually turned on.
+
+     Functional description and requirements of Alarm Reporting
+     Control are defined in ITU-T Recommendation M.3100 Amendment 3
+     [M.3100 Amd3]."
+  REFERENCE
+        "ITU Recommendation M.3100 Amendment 3, 'Generic Network
+         Information Model', January 2001."
+  ::= { arcObjects 1 }
+
+arcEntry OBJECT-TYPE
+  SYNTAX  ArcEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains information about an ARC setting
+     of a resource in the system.
+
+     Implementation need to be aware that if the total size of
+     arcIndex and arcNotificationId exceeds 114 sub-IDs, then OIDs
+     of column instances in this table will have more than 128
+     sub-IDs and cannot be access using SNMPv1, SNMPv2c, or snmpv3."
+  INDEX  { arcIndex, arcAlarmType, arcNotificationId }
+  ::= { arcTable 1 }
+
+ArcEntry ::=
+  SEQUENCE {
+    arcIndex                      ResourceId,
+    arcAlarmType                  IANAItuProbableCauseOrZero,
+    arcNotificationId             OBJECT IDENTIFIER,
+    arcState                      INTEGER,
+    arcNalmTimeRemaining          Unsigned32,
+    arcRowStatus                  RowStatus,
+    arcStorageType                StorageType
+    }
+
+arcIndex OBJECT-TYPE
+  SYNTAX  ResourceId
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This object uniquely identifies a resource, which is under the
+     arcState's control for the associated arcAlarmType.
+
+     For example, if the resource is an interface, this object will
+     point to an instance of interface, e.g., ifIndex.1."
+  ::= { arcEntry 1 }
+
+arcAlarmType OBJECT-TYPE
+  SYNTAX  IANAItuProbableCauseOrZero
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This object identifies the alarm condition type controlled by the
+     arcState.  It specifies the value 0 or a value of
+     IANAItuProbableCause that is applicable to the resource.
+     IANAItuProbableCause is defined in the IANA-ITU-ALARM-TC
+     module in the Alarm MIB document.
+
+     The value of zero (0) implies any probable causes that are
+     applicable to the resource.  Usually, the applicable probable
+     causes of a resource are specified in the resource-specific mib."
+  ::= { arcEntry 2 }
+
+arcNotificationId OBJECT-TYPE
+  SYNTAX  OBJECT IDENTIFIER
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This object identifies the type of notification to be suppressed.
+     The notification type identified should be the one normally used
+     by the resource for reporting its alarms.  When the value of 0.0 is
+     specified for this object, it implies all applicable notification
+     types."
+  ::= { arcEntry 3 }
+
+arcState OBJECT-TYPE
+  SYNTAX  INTEGER {
+            nalm (1),
+            nalmQI (2),
+            nalmTI (3),
+            nalmQICD (4)
+            }
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Defined in M.3100 Amendment 3 [M.3100 Amd3], there are five
+     ARC states: alm, nalm, nalmQI, nalmQICD, and nalmTI.
+
+        alm:        Alarm reporting is turned on (i.e., is allowed).
+        nalm:       Alarm reporting is turned off (i.e., not allowed).
+        nalmQI:     nalm - Qualified Inhibit. Alarm reporting is
+                    turned off until the managed entity is qualified
+                    problem-free for an optional persistence interval.
+                    Problem-free means that the condition corresponding
+                    to the specified alarm type is cleared.
+        nalmQICD:   nalmQI - Count down.  This is a substate of nalmQI
+                    and performs the persistence timing countdown
+                    function after the managed entity is qualified
+                    problem-free.
+        nalmTI:     nalm - Timed Inhibit.  Alarm reporting is turned
+                    off for a specified time interval.
+
+     alm may transition to nalm, nalmQI or nalmTI by management request.
+
+     nalm may transition to alm, nalmQI or nalmTI by management request.
+
+     nalmQI may transition to nalm or alm by management request.
+
+     nalmQI may transition to alm automatically
+             if qualified problem-free (if nalmQICD is not supported) or
+             if the CD timer expired (if nalmQICD is supported)
+
+     nalmTI may transition to alm or nalm by management request.
+
+     nalmTI may transition to alm automatically if the TI timer expired.
+
+     Further details of ARC state transitions are defined in Figure 3
+     of M.3100 Amd3 [M.3100 Amd3].
+
+     According to the requirements in M.3100 Amd3, a resource
+     supporting the ARC feature shall support the alm state and at
+     least one of the nalm, nalmTI, and nalmQI states. The nalmQICD
+     state is an optional substate of nalmQI.
+
+     The arcState object controls the alarm reporting state of a
+     resource. Note that the state alm (alarm reporting is allowed) is
+     not listed in the enumeration of the value of this object. However,
+     this state is implicitly supported by the mib.
+     Once a resource enters the normal reporting mode (i.e., in the alm
+     state) for the specified alarm type, the corresponding
+     row will be automatically deleted from the arc table.
+     Also the manual setting of arcState to alm can be achieved through
+     setting the RowStatus object to 'destroy'.
+
+     The nalamQICD state is a transitional state from nalmQI to alm. It
+     is optional depending on the resource type and the implementation
+     of the resource.  If it is supported, before the state
+     transitions from nalmQI to alm, a count down period is activated
+     for a duration set by the object arcNalmCDTimeInterval.  When the
+     time is up, the arcState transitions to alm."
+  ::= { arcEntry 4 }
+
+arcNalmTimeRemaining OBJECT-TYPE
+  SYNTAX  Unsigned32
+  UNITS       "seconds"
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This variable indicates the time remaining in the nalmTI state
+     or the nalmQICD state, in units of second.
+
+     At the moment the resource enters the nalmTI state, this variable
+     will have the initial value equal to the value of
+
+     arcNalmTITimeInterval and then starts decrementing as time goes by.
+
+     Similarly at the moment the resource enters the nalmQICD state,
+     this variable will have the initial value equal to the value of
+     arcNalmCDTimeInterval and then starts decrementing as time goes by.
+
+     This variable is read-create and thus will allow the manager to
+     write (extend or shorten), as needed, the remaining time when the
+     resource is in the nalmTI or nalmQICD state.
+
+     If this variable is supported and the resource is currently not in
+     the nalmTI nor nalmQICD state, the value of this variable shall
+     equal to zero."
+  ::= { arcEntry 5 }
+
+arcRowStatus OBJECT-TYPE
+  SYNTAX  RowStatus
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This columnar object is used for creating and deleting a conceptual
+     row of the arcTable.  It is used to create and delete an arc
+     setting.
+
+     Setting RowStatus to createAndGo or createAndWait implies creating
+     a new ARC setting for the specified resource and alarm type.
+     Setting RowStatus to destroy implies removing the ARC setting and
+     thus has the effect of resuming normal reporting behaviour of the
+     resource for the alarm type.
+
+     Only the objects arcState, arcNalmTimeRemaining, and arcRowStatus
+     can be updated when a row is active. All the objects, except
+     arcNalmTimeRemaining, must be set before the row can be activated."
+  ::= { arcEntry 6 }
+
+arcStorageType OBJECT-TYPE
+  SYNTAX       StorageType
+  MAX-ACCESS   read-create
+  STATUS       current
+  DESCRIPTION
+    "The storage type for this conceptual row.
+     Conceptual rows having the value 'permanent' must
+     allow write-access at a minimum to arcState.
+     Note that arcState must allow change by management request.
+     Therefore, no row can be created with 'readOnly'.
+     If a set operation tries to set the value to 'readOnly',
+     then an 'inconsistentValue' error must be returned."
+  DEFVAL      { nonVolatile }
+  ::= { arcEntry 7}
+
+--------------------------
+-- conformance information
+--------------------------
+
+arcConformance OBJECT IDENTIFIER ::= { arcMibModule 3 }
+
+arcCompliances OBJECT IDENTIFIER ::= { arcConformance 1 }
+
+arcCompliance MODULE-COMPLIANCE
+  STATUS  current
+    DESCRIPTION
+      "The compliance statement for systems supporting
+       the ARC MIB module."
+
+  MODULE -- this module
+           MANDATORY-GROUPS {
+            arcSettingGroup
+           }
+
+  OBJECT arcStorageType
+    WRITE-SYNTAX StorageType {
+                         volatile(2),
+                         nonVolatile(3),
+                         permanent(4)
+                         }
+    DESCRIPTION
+      "Support for value 'other' is not required.
+       The arcState object must allow change by management
+       request.  Therefore, no row can be created with
+       'readOnly'."
+
+  GROUP  arcTIGroup
+  DESCRIPTION
+    "This group is REQUIRED for ARC settings
+     that provide the Time Inhibit (TI) function."
+
+  GROUP  arcQICDGroup
+  DESCRIPTION
+    "This group is REQUIRED for ARC settings
+     that provide the Quality Inhibit (QI) Count Down (CD)
+     function."
+  ::= { arcCompliances 1 }
+
+arcGroups OBJECT IDENTIFIER ::= { arcConformance 2 }
+
+arcSettingGroup OBJECT-GROUP
+  OBJECTS {
+          arcState,
+          arcRowStatus,
+          arcStorageType
+          }
+   STATUS   current
+   DESCRIPTION
+     "A collection of objects applicable to
+      basic ARC setting."
+   ::= { arcGroups 1}
+
+arcTIGroup OBJECT-GROUP
+  OBJECTS {
+          arcTITimeInterval,
+          arcNalmTimeRemaining
+          }
+   STATUS   current
+   DESCRIPTION
+     "A collection of objects applicable to
+      ARC setting that support the Time Inhibit (TI)
+      function."
+   ::= { arcGroups 2}
+
+arcQICDGroup OBJECT-GROUP
+  OBJECTS {
+          arcCDTimeInterval,
+          arcNalmTimeRemaining
+          }
+  STATUS   current
+  DESCRIPTION
+    "A collection of objects applicable to
+     ARC setting that support the Quality Inhibit (QI)
+     Count Down (CD) function."
+  ::= { arcGroups 3}
+
+END
diff --git a/snmp_builder/mibs/ATM-ACCOUNTING-INFORMATION-MIB.mib b/snmp_builder/mibs/ATM-ACCOUNTING-INFORMATION-MIB.mib
new file mode 100644
index 0000000..7b9cb9a
--- /dev/null
+++ b/snmp_builder/mibs/ATM-ACCOUNTING-INFORMATION-MIB.mib
@@ -0,0 +1,402 @@
+ATM-ACCOUNTING-INFORMATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+    mib-2, Integer32, Counter64                   FROM SNMPv2-SMI
+    DisplayString, DateAndTime                    FROM SNMPv2-TC
+    AtmAddr                                       FROM ATM-TC-MIB;
+
+atmAccountingInformationMIB MODULE-IDENTITY
+    LAST-UPDATED "9611052000Z"
+    ORGANIZATION "IETF AToM MIB Working Group"
+    CONTACT-INFO "
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive,
+                  San Jose CA 95134-1706.
+                  Phone: +1 408 526 5260
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module for identifying items of accounting
+            information which are applicable to ATM connections."
+    ::= { mib-2 59 }
+
+atmAcctngMIBObjects OBJECT IDENTIFIER ::=
+                                        { atmAccountingInformationMIB 1 }
+
+-- Definitions of objects for use in specifying ATM accounting
+-- data to be collected
+
+atmAcctngDataObjects OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+            "This identifier defines a subtree under which various
+            objects are defined such that a set of objects to be
+            collected as ATM accounting data can be specified as a
+            (subtree, list) tuple using this identifier as the subtree."
+    ::= { atmAcctngMIBObjects 1 }
+
+-- Objects defined under the atmAcctngDataObjects subtree
+--
+-- In each case the semantics of the object are interpreted with
+-- respect to the creation/storage of an accounting record for a
+-- particular connection on a particular interface.
+
+atmAcctngConnectionType OBJECT-TYPE
+    SYNTAX      INTEGER { pvc(1),
+                          pvp(2),
+                          svcIncoming(3),
+                          svcOutgoing(4),
+                          svpIncoming(5),
+                          svpOutgoing(6),
+                          spvcInitiator(7),
+                          spvcTarget(8),
+                          spvpInitiator(9),
+                          spvpTarget(10) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The type of connection."
+    ::= { atmAcctngDataObjects 1 }
+
+atmAcctngCastType OBJECT-TYPE
+    SYNTAX      INTEGER { p2p(1), p2mp(2) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether the connection is point-to-point
+            or point-to-multipoint."
+    ::= { atmAcctngDataObjects 2 }
+
+atmAcctngIfName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A textual name for the interface on which the data for the
+            connection was collected.  If the local SNMP agent supports
+            the object ifName, the value of this object must be
+            identical to that of ifName in the conceptual row of the
+            ifTable corresponding to this interface."
+    ::= { atmAcctngDataObjects 3 }
+
+atmAcctngIfAlias OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The 'alias' name for the interface as specified by a
+            network manager, e.g., via a management set operation to
+            modify the relevant instance of the ifAlias object.  Note
+            that in contrast to ifIndex, ifAlias provides a non-volatile
+            'handle' for the interface, the value of which is retained
+            across agent reboots."
+    ::= { atmAcctngDataObjects 4 }
+
+atmAcctngVpi OBJECT-TYPE
+    SYNTAX      INTEGER (0..4095)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The VPI used for the connection."
+    ::= { atmAcctngDataObjects 5 }
+
+atmAcctngVci OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The VCI used for the connection."
+    ::= { atmAcctngDataObjects 6 }
+
+atmAcctngCallingParty OBJECT-TYPE
+    SYNTAX      AtmAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The connection's calling party.  If unknown (e.g., for a
+            PVC), then the value of this object is the zero-length
+            string."
+    ::= { atmAcctngDataObjects 7 }
+
+atmAcctngCalledParty OBJECT-TYPE
+    SYNTAX      AtmAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The connection's called party.  If unknown (e.g., for a
+            PVC), then the value of this object is the zero-length
+            string."
+    ::= { atmAcctngDataObjects 8 }
+
+atmAcctngCallReference OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..3))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The connection's call reference value (e.g., from Q.2931).
+            If unknown (e.g., for a PVC), then the value of this object
+            is the zero-length string."
+    ::= { atmAcctngDataObjects 9 }
+
+atmAcctngStartTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The time when the connection was established."
+    ::= { atmAcctngDataObjects 10 }
+
+atmAcctngCollectionTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The time at which the data in this record was collected."
+    ::= { atmAcctngDataObjects 11 }
+
+atmAcctngCollectMode OBJECT-TYPE
+    SYNTAX      INTEGER { onRelease(1),
+                          periodically(2),
+                          onCommand(3) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The reason why this connection data was collected."
+    ::= { atmAcctngDataObjects 12 }
+
+atmAcctngReleaseCause OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "If the connection data was collected because of the release
+            of an SVC, then this is the cause code in the Release
+            message for the connection; otherwise, this object has the
+            value zero."
+    ::= { atmAcctngDataObjects 13 }
+
+atmAcctngServiceCategory OBJECT-TYPE
+    SYNTAX      INTEGER { other(1), cbr(2), vbrRt(3), vbrNrt(4),
+                          abr(5), ubr(6), unknown(7) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The connection's service category."
+    ::= { atmAcctngDataObjects 14 }
+
+atmAcctngTransmittedCells OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The number of cells, including OAM cells, transmitted by
+            this switch on this connection."
+    ::= { atmAcctngDataObjects 15 }
+
+atmAcctngTransmittedClp0Cells OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The number of cells with CLP=0, including OAM cells,
+            transmitted by this switch on this connection."
+    ::= { atmAcctngDataObjects 16 }
+
+atmAcctngReceivedCells OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The number of cells, including OAM cells, received by this
+            switch on this connection."
+    ::= { atmAcctngDataObjects 17 }
+
+atmAcctngReceivedClp0Cells OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The number of cells with CLP=0, including OAM cells,
+            received by this switch on this connection."
+    ::= { atmAcctngDataObjects 18 }
+
+atmAcctngTransmitTrafficDescriptorType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The traffic descriptor type (as defined in RFC 1695 and its
+            successors) in the direction in which the switch transmits
+            cells on the connection."
+    REFERENCE
+            "See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and
+            its successors."
+    ::= { atmAcctngDataObjects 19 }
+
+atmAcctngTransmitTrafficDescriptorParam1 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The first traffic descriptor parameter in the direction in
+            which this switch transmits cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngTransmitTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 20 }
+
+atmAcctngTransmitTrafficDescriptorParam2 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The second traffic descriptor parameter in the direction in
+            which this switch transmits cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngTransmitTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 21 }
+
+atmAcctngTransmitTrafficDescriptorParam3 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The third traffic descriptor parameter in the direction in
+            which this switch transmits cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngTransmitTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 22 }
+
+atmAcctngTransmitTrafficDescriptorParam4 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The fourth traffic descriptor parameter in the direction in
+            which this switch transmits cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngTransmitTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 23 }
+
+atmAcctngTransmitTrafficDescriptorParam5 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The fifth traffic descriptor parameter in the direction in
+            which this switch transmits cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngTransmitTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 24 }
+
+atmAcctngReceiveTrafficDescriptorType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The traffic descriptor type (as defined in RFC 1695 and its
+            successors) in the direction in which this switch receives
+            cells on this connection."
+    REFERENCE
+            "See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and
+            its successors."
+    ::= { atmAcctngDataObjects 25 }
+
+atmAcctngReceiveTrafficDescriptorParam1 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The first traffic descriptor parameter in the direction in
+            which this switch receives cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngReceiveTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 26 }
+
+atmAcctngReceiveTrafficDescriptorParam2 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The second traffic descriptor parameter in the direction in
+            which this switch receives cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngReceiveTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 27 }
+
+atmAcctngReceiveTrafficDescriptorParam3 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The third traffic descriptor parameter in the direction in
+            which this switch receives cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngReceiveTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 28 }
+
+atmAcctngReceiveTrafficDescriptorParam4 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The fourth traffic descriptor parameter in the direction in
+            which this switch receives cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngReceiveTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 29 }
+
+atmAcctngReceiveTrafficDescriptorParam5 OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The fifth traffic descriptor parameter in the direction in
+            which this switch receives cells on this connection.
+            Interpretation of this parameter is dependent on the value
+            of atmAcctngReceiveTrafficDescriptorType."
+    ::= { atmAcctngDataObjects 30 }
+
+atmAcctngCallingPartySubAddress OBJECT-TYPE
+    SYNTAX      AtmAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The connection's calling party sub-address.  If the
+            connection has no calling party sub-address, or it's value
+            is unknown, then the value of this object is the zero-length
+            string."
+    ::= { atmAcctngDataObjects 31 }
+
+atmAcctngCalledPartySubAddress OBJECT-TYPE
+    SYNTAX      AtmAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The connection's called party sub-address.  If the
+            connection has no called party sub-address, or it's value is
+            unknown, then the value of this object is the zero-length
+            string."
+    ::= { atmAcctngDataObjects 32 }
+
+atmAcctngRecordCrc16 OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(2))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The value of the CRC-16 checksum (as defined by ISO 3309
+            (HDLC) and/or ITU X.25) calculated over the accounting
+            record containing this object.
+
+            While the mechanism for calculating/encoding the checksum
+            value is specific to the method of encoding the accounting
+            record, an accounting record containing this object is
+            typically generated by initializing the value of this object
+            to the all-zeros string ('0000'H), with the location of
+            these zeros being saved.  After generating the record, the
+            checksum is calculated over the whole connection record and
+            then the all-zeros value is overwritten (at the saved
+            location) by the calculated value of the checksum."
+    ::= { atmAcctngDataObjects 33 }
+
+END
diff --git a/snmp_builder/mibs/ATM-MIB.mib b/snmp_builder/mibs/ATM-MIB.mib
new file mode 100644
index 0000000..7ad2c2c
--- /dev/null
+++ b/snmp_builder/mibs/ATM-MIB.mib
@@ -0,0 +1,2995 @@
+ATM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE,
+   Counter32, Integer32, IpAddress, mib-2
+       FROM SNMPv2-SMI
+   DisplayString, RowStatus, TruthValue
+       FROM SNMPv2-TC
+   MODULE-COMPLIANCE, OBJECT-GROUP
+       FROM SNMPv2-CONF
+   InterfaceIndex, ifIndex
+       FROM IF-MIB
+   AtmAddr, AtmConnKind, AtmConnCastType,
+   AtmServiceCategory, AtmTrafficDescrParamIndex,
+   AtmVpIdentifier, AtmVcIdentifier,
+   AtmVorXAdminStatus, AtmVorXLastChange,
+   AtmVorXOperStatus, atmNoClpNoScr
+       FROM ATM-TC-MIB;
+
+atmMIB MODULE-IDENTITY
+     LAST-UPDATED "9810191200Z"
+     ORGANIZATION "IETF AToM MIB Working Group"
+     CONTACT-INFO
+       "          Kaj Tesink
+         Postal:  Bellcore
+                  331 Newman Springs Road
+                  Red Bank, NJ 07701
+         Tel:     732-758-5254
+         Fax:     732-758-2269
+         E-mail:  kaj@bellcore.com"
+     DESCRIPTION
+      "This is the MIB Module for ATM and AAL5-related
+       objects for managing ATM interfaces, ATM virtual
+
+       links, ATM cross-connects, AAL5 entities, and
+       and AAL5 connections."
+     REVISION      "9810191200Z"
+     DESCRIPTION
+      "The initial revision of this module was published
+       as RFC 1695. Key revisions include:
+       o  Textual Conventions and OBJECT IDENTITIES have
+          been moved to a separate MIB module.
+       o  Applicability of objects to PVCs, SVCs and Soft
+          PVCs has been clarified.
+       o  DEFVAL clauses have been added.
+       o  The relationship of ifIndex values with different
+          layers and sublayers related to ATM has been
+          clarified.
+       o  atmTrafficQosClass has been deprecated
+          and replaced with atmServiceCategory.
+       o  atmInterfaceCurrentMaxVpiBits and
+          atmInterfaceCurrentMaxVciBits have been added with
+          a description on their relationship with other
+          objects.
+       o  atmInterfaceAddressType and atmInterfaceAdminAddress
+          have been deprecated and replaced by
+          atmInterfaceSubscrAddress.
+       o  atmInterfaceTCAlarmState has been clarified.
+       o  atmTrafficDescrParamIndexNext has been introduced
+          in order to provide a manager a free
+          atmTrafficDescrParamIndex value.
+       o  The atmTrafficFrameDiscard capability has been added.
+       o  A connection topology type (atmVpl/VclCastType) and
+          a call control type (atmVpl/VclConnKind) have been
+          added.
+       o  aal2 has been added to atmVccAalType."
+     REVISION      "9406072245Z"
+     DESCRIPTION
+      "The RFC1695 version of this MIB module."
+     ::= { mib-2 37 }
+
+atmMIBObjects  OBJECT IDENTIFIER ::= {atmMIB 1}
+
+-- {atmMIBObjects 1} has been moved to a separate
+-- specification [19].
+
+-- This ATM MIB Module consists of the following tables:
+-- (1) ATM Interface configuration table
+-- (2) ATM Interface DS3 PLCP table
+-- (3) ATM Interface TC Sublayer table
+
+-- (4) Atm Traffic Descriptor table
+-- (5) ATM Interface VPL configuration table
+-- (6) ATM Interface VCL configuration table
+-- (7) ATM VP Cross Connect table (for PVCs)
+-- (8) ATM VC Cross Connect table (for PVCs)
+-- (9) ATM Interface AAL5 VCC performance statistics
+--     table
+
+--    ATM Interface Configuration Parameters Table
+
+-- This table contains ATM specific
+-- configuration information associated with
+-- an ATM interface beyond those
+-- supported using the ifTable.
+
+atmInterfaceConfTable  OBJECT-TYPE
+     SYNTAX         SEQUENCE OF AtmInterfaceConfEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This table contains ATM local interface
+       configuration parameters, one entry per ATM
+       interface port."
+     ::= { atmMIBObjects 2 }
+
+atmInterfaceConfEntry    OBJECT-TYPE
+     SYNTAX         AtmInterfaceConfEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This list contains ATM interface configuration
+       parameters and state variables and is indexed
+       by ifIndex values of ATM interfaces."
+     INDEX { ifIndex }
+     ::= { atmInterfaceConfTable  1}
+
+AtmInterfaceConfEntry    ::= SEQUENCE  {
+     atmInterfaceMaxVpcs             INTEGER,
+     atmInterfaceMaxVccs             INTEGER,
+     atmInterfaceConfVpcs            INTEGER,
+     atmInterfaceConfVccs            INTEGER,
+     atmInterfaceMaxActiveVpiBits    INTEGER,
+     atmInterfaceMaxActiveVciBits    INTEGER,
+     atmInterfaceIlmiVpi             AtmVpIdentifier,
+     atmInterfaceIlmiVci             AtmVcIdentifier,
+     atmInterfaceAddressType         INTEGER,
+     atmInterfaceAdminAddress        AtmAddr,
+     atmInterfaceMyNeighborIpAddress IpAddress,
+     atmInterfaceMyNeighborIfName    DisplayString,
+     atmInterfaceCurrentMaxVpiBits   INTEGER,
+     atmInterfaceCurrentMaxVciBits   INTEGER,
+     atmInterfaceSubscrAddress       AtmAddr
+          }
+
+atmInterfaceMaxVpcs OBJECT-TYPE
+     SYNTAX         INTEGER  (0..4096)
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The maximum number of VPCs (PVPCs and SVPCs)
+       supported at this ATM interface. At the ATM UNI,
+       the maximum number of VPCs (PVPCs and SVPCs)
+       ranges from 0 to 256 only."
+     ::= { atmInterfaceConfEntry 1}
+
+atmInterfaceMaxVccs OBJECT-TYPE
+     SYNTAX         INTEGER  (0..65536)
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The maximum number of VCCs (PVCCs and SVCCs)
+       supported at this ATM interface."
+     ::= { atmInterfaceConfEntry 2}
+
+atmInterfaceConfVpcs  OBJECT-TYPE
+     SYNTAX         INTEGER  (0..4096)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of VPCs (PVPC, Soft PVPC and SVPC)
+       currently in use at this ATM interface.  It includes
+       the number of PVPCs and Soft PVPCs that are configured
+       at the interface, plus the number of SVPCs
+       that are currently  established at the
+       interface.
+
+       At the ATM UNI, the configured number of
+       VPCs (PVPCs and SVPCs) can range from
+       0 to 256 only."
+     ::= { atmInterfaceConfEntry 3}
+
+atmInterfaceConfVccs  OBJECT-TYPE
+     SYNTAX         INTEGER  (0..65536)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of VCCs (PVCC, Soft PVCC and SVCC)
+       currently in use at this ATM interface.  It includes
+       the number of PVCCs and Soft PVCCs that are configured
+       at the interface, plus the number of SVCCs
+       that are currently  established at the
+       interface."
+     ::= { atmInterfaceConfEntry 4}
+
+atmInterfaceMaxActiveVpiBits  OBJECT-TYPE
+     SYNTAX         INTEGER (0..12)
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The  maximum number of active VPI bits
+       configured for use at the ATM interface.
+       At the ATM UNI, the maximum number of active
+       VPI bits configured for use ranges from
+       0 to 8 only."
+     ::= { atmInterfaceConfEntry 5}
+
+atmInterfaceMaxActiveVciBits  OBJECT-TYPE
+     SYNTAX         INTEGER (0..16)
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The maximum number of active VCI bits
+       configured for use at this ATM interface."
+     ::= { atmInterfaceConfEntry 6}
+
+atmInterfaceIlmiVpi OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The VPI value of the VCC supporting
+       the ILMI at this ATM interface.  If the values of
+       atmInterfaceIlmiVpi and atmInterfaceIlmiVci are
+       both equal to zero then the ILMI is not
+       supported at this ATM interface."
+     DEFVAL { 0 }
+     ::= { atmInterfaceConfEntry 7}
+
+atmInterfaceIlmiVci OBJECT-TYPE
+     SYNTAX         AtmVcIdentifier
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The VCI value of the VCC supporting
+       the ILMI at this ATM interface.  If the values of
+       atmInterfaceIlmiVpi and atmInterfaceIlmiVci are
+       both equal to zero then the ILMI is not
+       supported at this ATM interface."
+     DEFVAL { 16 }
+     ::= { atmInterfaceConfEntry 8}
+
+atmInterfaceAddressType  OBJECT-TYPE
+     SYNTAX         INTEGER {
+                       private(1),
+                       nsapE164(2),
+                       nativeE164(3),
+                       other(4)
+                         }
+     MAX-ACCESS     read-only
+     STATUS         deprecated
+     DESCRIPTION
+      "The type of primary ATM address configured
+       for use at this ATM interface."
+     ::= { atmInterfaceConfEntry 9 }
+
+--  The atmInterfaceAdminAddress object has been replaced by
+--  atmInterfaceSubscrAddress.
+
+atmInterfaceAdminAddress OBJECT-TYPE
+     SYNTAX         AtmAddr
+     MAX-ACCESS     read-only
+     STATUS         deprecated
+     DESCRIPTION
+      "The primary address assigned for administrative purposes,
+       for example, an address associated with the
+       service provider side of a public network UNI
+       (thus, the value of this address corresponds
+       with the value of ifPhysAddress at the host side).
+       If this interface has no assigned administrative
+       address, or when the address used for
+       administrative purposes is the same as that used
+       for ifPhysAddress, then this is an octet string of
+       zero length."
+     ::= { atmInterfaceConfEntry 10 }
+
+atmInterfaceMyNeighborIpAddress OBJECT-TYPE
+     SYNTAX         IpAddress
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The IP address of the neighbor system connected to
+       the  far end of this interface, to which a Network
+       Management Station can send SNMP messages, as IP
+       datagrams sent to UDP port 161, in order to access
+       network management information concerning the
+       operation of that system.  Note that the value
+       of this object may be obtained in different ways,
+       e.g., by manual configuration, or through ILMI
+       interaction with the neighbor system."
+     ::= { atmInterfaceConfEntry 11 }
+
+atmInterfaceMyNeighborIfName OBJECT-TYPE
+     SYNTAX         DisplayString
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The textual name of the interface on the neighbor
+       system on the far end of this interface, and to
+       which this interface connects.  If the neighbor
+       system is manageable through SNMP and supports
+       the object ifName, the value of this object must
+       be identical with that of ifName for the ifEntry
+       of the lowest level physical interface
+       for this port.  If this interface does not have a
+       textual name, the value of this object is a zero
+       length string.  Note that the value of this object
+       may be obtained in different ways, e.g., by manual
+       configuration, or through ILMI interaction with
+       the neighbor system."
+     ::= { atmInterfaceConfEntry 12 }
+
+atmInterfaceCurrentMaxVpiBits    OBJECT-TYPE
+     SYNTAX         INTEGER  (0..12)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The maximum number of VPI Bits that may
+       currently be used at this ATM interface.
+       The value is the minimum of
+       atmInterfaceMaxActiveVpiBits, and the
+       atmInterfaceMaxActiveVpiBits of the interface's
+       UNI/NNI peer.
+
+       If the interface does not negotiate with
+       its peer to determine the number of VPI Bits
+       that can be used on the interface, then the
+
+       value of this object must equal
+       atmInterfaceMaxActiveVpiBits."
+     ::= { atmInterfaceConfEntry 13 }
+
+atmInterfaceCurrentMaxVciBits    OBJECT-TYPE
+     SYNTAX         INTEGER  (0..16)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The maximum number of VCI Bits that may
+       currently be used at this ATM interface.
+       The value is the minimum of
+       atmInterfaceMaxActiveVciBits, and the
+       atmInterfaceMaxActiveVciBits of the interface's
+       UNI/NNI peer.
+
+       If the interface does not negotiate with
+       its peer to determine the number of VCI Bits
+       that can be used on the interface, then the
+       value of this object must equal
+       atmInterfaceMaxActiveVciBits."
+     ::= { atmInterfaceConfEntry 14 }
+
+atmInterfaceSubscrAddress OBJECT-TYPE
+     SYNTAX         AtmAddr
+     MAX-ACCESS     read-write
+     STATUS         current
+     DESCRIPTION
+      "The identifier assigned by a service provider
+       to the network side of a public network UNI.
+       If this interface has no assigned service provider
+       address, or for other interfaces this is an octet string
+       of zero length."
+     ::= { atmInterfaceConfEntry 15 }
+
+-- The ATM Interface DS3 PLCP Table
+
+-- This table contains the DS3 PLCP configuration and
+-- state parameters of those ATM interfaces
+-- which use DS3 PLCP for carrying ATM cells over DS3.
+
+atmInterfaceDs3PlcpTable  OBJECT-TYPE
+     SYNTAX       SEQUENCE OF AtmInterfaceDs3PlcpEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+      "This table contains ATM interface DS3 PLCP
+       parameters and state variables, one entry per
+
+       ATM interface port."
+     ::= { atmMIBObjects 3}
+
+atmInterfaceDs3PlcpEntry OBJECT-TYPE
+     SYNTAX         AtmInterfaceDs3PlcpEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This list contains DS3 PLCP parameters and
+       state variables at the ATM interface and is
+       indexed by the ifIndex value of the ATM interface."
+     INDEX    { ifIndex }
+     ::= { atmInterfaceDs3PlcpTable 1}
+
+AtmInterfaceDs3PlcpEntry    ::= SEQUENCE  {
+     atmInterfaceDs3PlcpSEFSs       Counter32,
+     atmInterfaceDs3PlcpAlarmState  INTEGER,
+     atmInterfaceDs3PlcpUASs        Counter32
+       }
+
+atmInterfaceDs3PlcpSEFSs  OBJECT-TYPE
+     SYNTAX         Counter32
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of DS3 PLCP Severely Errored Framing
+       Seconds (SEFS). Each SEFS represents a
+       one-second interval which contains
+       one or more SEF events."
+     ::= { atmInterfaceDs3PlcpEntry 1}
+
+atmInterfaceDs3PlcpAlarmState    OBJECT-TYPE
+     SYNTAX         INTEGER {
+                       noAlarm(1),
+                       receivedFarEndAlarm(2),
+                       incomingLOF(3)
+                            }
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This variable indicates if there is an
+       alarm present for the DS3 PLCP.  The value
+       receivedFarEndAlarm means that the DS3 PLCP
+       has received an incoming Yellow
+       Signal, the value incomingLOF means that
+       the DS3 PLCP has declared a loss of frame (LOF)
+       failure condition, and the value noAlarm
+
+       means that there are no alarms present.
+       Transition from the failure to the no alarm state
+       occurs when no defects (e.g., LOF) are received
+       for more than 10 seconds."
+     ::= { atmInterfaceDs3PlcpEntry 2}
+
+atmInterfaceDs3PlcpUASs  OBJECT-TYPE
+     SYNTAX         Counter32
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The counter associated with the number of
+       Unavailable Seconds encountered by the PLCP."
+     ::= { atmInterfaceDs3PlcpEntry 3}
+
+-- The ATM Interface TC Sublayer Table
+
+-- This table contains TC sublayer configuration and
+-- state parameters of those ATM interfaces
+-- which use TC sublayer for carrying ATM cells over
+-- SONET/SDH or DS3.
+
+atmInterfaceTCTable  OBJECT-TYPE
+     SYNTAX         SEQUENCE OF AtmInterfaceTCEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This table contains ATM interface TC
+       Sublayer parameters and state variables,
+       one entry per ATM interface port."
+     ::= { atmMIBObjects 4}
+
+atmInterfaceTCEntry OBJECT-TYPE
+     SYNTAX         AtmInterfaceTCEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This list contains TC Sublayer parameters
+       and state variables at the ATM interface and is
+       indexed by the ifIndex value of the ATM interface."
+     INDEX  {ifIndex }
+     ::= { atmInterfaceTCTable 1}
+
+AtmInterfaceTCEntry    ::= SEQUENCE  {
+     atmInterfaceOCDEvents      Counter32,
+     atmInterfaceTCAlarmState   INTEGER
+
+       }
+
+atmInterfaceOCDEvents  OBJECT-TYPE
+     SYNTAX         Counter32
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of times the Out of Cell
+       Delineation (OCD) events occur.  If seven
+       consecutive ATM cells have Header Error
+       Control (HEC) violations, an OCD event occurs.
+       A high number of OCD events may indicate a
+       problem with the TC Sublayer."
+     ::= { atmInterfaceTCEntry 1}
+
+atmInterfaceTCAlarmState    OBJECT-TYPE
+     SYNTAX         INTEGER {
+                       noAlarm(1),
+                       lcdFailure(2)
+                             }
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This variable indicates if there is an
+       alarm present for the TC Sublayer.  The value
+       lcdFailure(2) indicates that the TC Sublayer
+       is currently in the Loss of Cell Delineation
+       (LCD) defect maintenance state.  The value
+       noAlarm(1) indicates that the TC Sublayer
+       is currently not in the LCD defect
+       maintenance state."
+      ::= { atmInterfaceTCEntry 2}
+
+--  ATM Traffic Descriptor Parameter Table
+
+-- This table contains a set of self-consistent
+-- ATM traffic parameters including the
+-- ATM traffic service category.
+
+-- The ATM virtual link tables (i.e., VPL and VCL tables)
+-- will use this ATM Traffic Descriptor table
+-- to assign traffic parameters and service category
+-- to the receive and transmit directions of
+-- the ATM virtual links (i.e., VPLs and VCLs).
+-- The ATM VPL or VCL table will indicate a row
+-- in the atmTrafficDescrParamTable
+-- using its atmTrafficDescrParamIndex value.
+
+-- The management application can then compare a set of
+-- ATM traffic parameters with a single value.
+
+-- If no suitable row(s) in the atmTrafficDescrParamTable
+-- exists, the manager must create a new row(s) in this
+-- table. If such a row is created, agent checks the
+-- sanity of that set of ATM traffic parameter values.
+
+-- The manager may use atmTrafficDescrParamIndexNext
+-- in order to obtain a free atmTrafficDescrParamIndex
+-- value.
+
+-- When creating a new row, the parameter values
+-- will be checked for self-consistency.
+-- Predefined/template rows may be supported.
+
+-- A row in the atmTrafficDescrParamTable is deleted
+-- by setting the atmTrafficDescrRowStatus to destroy(6).
+-- The agent will check whether this row is still in use
+-- by any entry of the atmVplTable or atmVclTable.
+-- The agent denies the request if the row is still in
+-- use.
+
+--  The ATM Traffic Descriptor Parameter Table
+
+atmTrafficDescrParamTable    OBJECT-TYPE
+     SYNTAX       SEQUENCE OF AtmTrafficDescrParamEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+      "This table contains information on ATM traffic
+       descriptor type and the associated parameters."
+     ::= { atmMIBObjects 5}
+
+atmTrafficDescrParamEntry    OBJECT-TYPE
+     SYNTAX         AtmTrafficDescrParamEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This list contains ATM traffic descriptor
+       type and the associated parameters."
+     INDEX  {atmTrafficDescrParamIndex}
+     ::= { atmTrafficDescrParamTable 1}
+
+AtmTrafficDescrParamEntry   ::= SEQUENCE  {
+  atmTrafficDescrParamIndex  AtmTrafficDescrParamIndex,
+  atmTrafficDescrType        OBJECT IDENTIFIER,
+  atmTrafficDescrParam1      Integer32,
+  atmTrafficDescrParam2      Integer32,
+  atmTrafficDescrParam3      Integer32,
+  atmTrafficDescrParam4      Integer32,
+  atmTrafficDescrParam5      Integer32,
+  atmTrafficQoSClass         INTEGER,
+  atmTrafficDescrRowStatus   RowStatus,
+  atmServiceCategory         AtmServiceCategory,
+  atmTrafficFrameDiscard     TruthValue
+               }
+
+atmTrafficDescrParamIndex OBJECT-TYPE
+     SYNTAX  AtmTrafficDescrParamIndex (1..2147483647)
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This object is used by the virtual link
+       table (i.e., VPL or VCL table)
+       to identify the row of this table.
+       When creating a new row in the table
+       the value of this index may be obtained
+       by retrieving the value of
+       atmTrafficDescrParamIndexNext."
+     ::= { atmTrafficDescrParamEntry  1}
+
+atmTrafficDescrType OBJECT-TYPE
+     SYNTAX         OBJECT IDENTIFIER
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The value of this object identifies the type
+       of ATM traffic descriptor.
+       The type may indicate no traffic descriptor or
+       traffic descriptor with one or more parameters.
+       These parameters are specified as a parameter
+       vector, in the corresponding instances of the
+       objects:
+           atmTrafficDescrParam1
+           atmTrafficDescrParam2
+           atmTrafficDescrParam3
+           atmTrafficDescrParam4
+           atmTrafficDescrParam5."
+      DEFVAL  { atmNoClpNoScr }
+      ::= { atmTrafficDescrParamEntry 2}
+
+atmTrafficDescrParam1 OBJECT-TYPE
+     SYNTAX         Integer32
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The first parameter of the ATM traffic descriptor
+       used according to the value of
+       atmTrafficDescrType."
+     DEFVAL  { 0 }
+     ::= { atmTrafficDescrParamEntry 3}
+
+atmTrafficDescrParam2 OBJECT-TYPE
+     SYNTAX         Integer32
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The second parameter of the ATM traffic descriptor
+       used according to the value of
+       atmTrafficDescrType."
+     DEFVAL  { 0 }
+     ::= { atmTrafficDescrParamEntry 4}
+
+atmTrafficDescrParam3 OBJECT-TYPE
+     SYNTAX         Integer32
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The third parameter of the ATM traffic descriptor
+       used according to the value of
+       atmTrafficDescrType."
+     DEFVAL  { 0 }
+     ::= { atmTrafficDescrParamEntry 5}
+
+atmTrafficDescrParam4 OBJECT-TYPE
+     SYNTAX         Integer32
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The fourth parameter of the ATM traffic descriptor
+       used according to the value of
+       atmTrafficDescrType."
+     DEFVAL  { 0 }
+     ::= { atmTrafficDescrParamEntry 6}
+
+atmTrafficDescrParam5 OBJECT-TYPE
+     SYNTAX         Integer32
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The fifth parameter of the ATM traffic descriptor
+       used according to the value of
+
+       atmTrafficDescrType."
+     DEFVAL  { 0 }
+     ::= { atmTrafficDescrParamEntry 7}
+
+atmTrafficQoSClass  OBJECT-TYPE
+     SYNTAX         INTEGER (0..255)
+     MAX-ACCESS     read-create
+     STATUS         deprecated
+     DESCRIPTION
+      "The value of this object identifies the QoS Class.
+       Four Service classes have been
+       specified in the ATM Forum UNI Specification:
+       Service Class A: Constant bit rate video and
+                        Circuit emulation
+       Service Class B: Variable bit rate video/audio
+       Service Class C: Connection-oriented data
+       Service Class D: Connectionless data
+       Four QoS classes numbered 1, 2, 3, and 4 have
+       been specified with the aim to support service
+       classes A, B, C, and D respectively.
+       An unspecified QoS Class numbered `0' is used
+       for best effort traffic."
+     DEFVAL  { 0 }
+     ::= { atmTrafficDescrParamEntry 8}
+
+atmTrafficDescrRowStatus  OBJECT-TYPE
+     SYNTAX         RowStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "This object is used to create
+       a new row or modify or delete an
+       existing row in this table."
+     DEFVAL  { active }
+     ::= {atmTrafficDescrParamEntry 9}
+
+atmServiceCategory  OBJECT-TYPE
+     SYNTAX         AtmServiceCategory
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The ATM service category."
+     DEFVAL  { ubr }
+     ::= { atmTrafficDescrParamEntry 10}
+
+atmTrafficFrameDiscard    OBJECT-TYPE
+     SYNTAX       TruthValue
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+      "If set to 'true', this object indicates that the network
+       is requested to treat data for this connection, in the
+       given direction, as frames (e.g. AAL5 CPCS_PDU's) rather
+       than as individual cells.  While the precise
+       implementation is network-specific, this treatment may
+       for example involve discarding entire frames during
+       congestion, rather than a few cells from many frames."
+     DEFVAL { true }
+     ::= { atmTrafficDescrParamEntry 11 }
+
+--  ATM Interface Virtual Path Link (VPL) Table
+
+-- This table contains configuration and state
+-- information of a bi-directional Virtual Path Link
+-- (VPL)
+
+-- This table can be used to create, delete or modify
+-- a VPL that is terminated in an ATM host or switch.
+-- This table can also be used to create, delete or
+-- modify a VPL which is cross-connected to another
+-- VPL.
+
+-- In the example below, the traffic flows on the receive
+-- and transmit directions of the VPLs are characterized
+-- by atmVplReceiveTrafficDescrIndex and
+-- atmVplTransmitTrafficDescrIndex respectively.
+-- The cross-connected VPLs are identified by
+-- atmVplCrossConnectIdentifier.
+
+--           ________________________________
+--           |                              |
+--  VPL      | ATM Host, Switch, or Network |   VPL
+-- receive   |                              |  receive
+-- ========> X                              X <=======
+-- <======== X                              X ========>
+-- transmit  |                              |  transmit
+--           |______________________________|
+
+--  The ATM Interface VPL Table
+
+atmVplTable         OBJECT-TYPE
+     SYNTAX         SEQUENCE OF AtmVplEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The Virtual Path Link (VPL) table.  A
+       bi-directional VPL is modeled as one entry
+       in this table. This table can be used for
+       PVCs, SVCs and Soft PVCs.
+       Entries are not present in this table for
+       the VPIs used by entries in the atmVclTable."
+     ::= { atmMIBObjects 6}
+
+atmVplEntry         OBJECT-TYPE
+     SYNTAX         AtmVplEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "An entry in the VPL table.  This entry is
+       used to model a bi-directional VPL.
+       To create a VPL at an ATM interface,
+       either of the following procedures are used:
+
+       Negotiated VPL establishment
+
+     (1) The management application creates
+         a VPL entry in the atmVplTable
+         by setting atmVplRowStatus to createAndWait(5).
+         This may fail for the following reasons:
+         - The selected VPI value is unavailable,
+         - The selected VPI value is in use.
+         Otherwise, the agent creates a row and
+         reserves the VPI value on that port.
+
+     (2) The manager selects an existing row(s) in the
+         atmTrafficDescrParamTable,
+         thereby, selecting a set of self-consistent
+         ATM traffic parameters and the service category
+         for receive and transmit directions of the VPL.
+
+    (2a) If no suitable row(s) in the
+         atmTrafficDescrParamTable exists,
+         the manager must create a new row(s)
+         in that table.
+
+    (2b) The manager characterizes the VPL's traffic
+         parameters through setting the
+         atmVplReceiveTrafficDescrIndex and the
+
+         atmVplTransmitTrafficDescrIndex values
+         in the VPL table, which point to the rows
+         containing desired ATM traffic parameter values
+         in the atmTrafficDescrParamTable.  The agent
+         will check the availability of resources and
+         may refuse the request.
+         If the transmit and receive service categories
+         are inconsistent, the agent should refuse the
+         request.
+
+     (3) The manager activates the VPL by setting the
+         the atmVplRowStatus to active(1).
+         If this set is successful, the agent has
+         reserved the resources to satisfy the requested
+         traffic parameter values and the service category
+         for that VPL.
+
+     (4) If the VPL terminates a VPC in the ATM host
+         or switch, the manager turns on the
+         atmVplAdminStatus to up(1) to turn the VPL
+         traffic flow on.  Otherwise, the
+         atmVpCrossConnectTable  must be used
+         to cross-connect the VPL to another VPL(s)
+         in an ATM switch or network.
+
+       One-Shot VPL Establishment
+
+       A VPL may also be established in one step by a
+       set-request with all necessary VPL parameter
+       values and atmVplRowStatus set to createAndGo(4).
+
+       In contrast to the negotiated VPL establishment
+       which allows for detailed error checking
+       (i.e., set errors are explicitly linked to
+       particular resource acquisition failures),
+       the one-shot VPL establishment
+       performs the setup on one operation but
+       does not have the advantage of step-wise
+       error checking.
+
+       VPL Retirement
+
+       A VPL is released by setting atmVplRowStatus to
+       destroy(6), and the agent may release all
+       associated resources."
+     INDEX  {ifIndex, atmVplVpi }
+     ::= { atmVplTable  1}
+
+AtmVplEntry    ::= SEQUENCE  {
+     atmVplVpi          AtmVpIdentifier,
+     atmVplAdminStatus  AtmVorXAdminStatus,
+     atmVplOperStatus   AtmVorXOperStatus,
+     atmVplLastChange   AtmVorXLastChange,
+     atmVplReceiveTrafficDescrIndex
+                    AtmTrafficDescrParamIndex,
+     atmVplTransmitTrafficDescrIndex
+                    AtmTrafficDescrParamIndex,
+     atmVplCrossConnectIdentifier INTEGER,
+     atmVplRowStatus    RowStatus,
+     atmVplCastType     AtmConnCastType,
+     atmVplConnKind     AtmConnKind
+        }
+
+atmVplVpi           OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value of the VPL."
+     ::= { atmVplEntry 1}
+
+atmVplAdminStatus   OBJECT-TYPE
+     SYNTAX         AtmVorXAdminStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "This object is instanciated only for a VPL
+       which terminates a VPC (i.e., one which is
+       NOT cross-connected to other VPLs).
+       Its value specifies the desired
+       administrative state of the VPL."
+     DEFVAL { down }
+     ::= { atmVplEntry 2}
+
+atmVplOperStatus    OBJECT-TYPE
+     SYNTAX         AtmVorXOperStatus
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The current operational status of the VPL."
+     ::= { atmVplEntry 3}
+
+atmVplLastChange    OBJECT-TYPE
+     SYNTAX         AtmVorXLastChange
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The value of sysUpTime at the time this
+       VPL entered its current operational state."
+     ::= { atmVplEntry 4 }
+
+atmVplReceiveTrafficDescrIndex  OBJECT-TYPE
+     SYNTAX         AtmTrafficDescrParamIndex
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The value of this object identifies the row
+       in the atmTrafficDescrParamTable which
+       applies to the receive direction of the VPL."
+     DEFVAL { 0 }
+      ::= { atmVplEntry 5}
+
+atmVplTransmitTrafficDescrIndex  OBJECT-TYPE
+     SYNTAX         AtmTrafficDescrParamIndex
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The value of this object identifies the row
+       in the atmTrafficDescrParamTable which
+       applies to the transmit direction of the VPL."
+     DEFVAL { 0 }
+      ::= { atmVplEntry 6}
+
+atmVplCrossConnectIdentifier   OBJECT-TYPE
+     SYNTAX         INTEGER (0..2147483647)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This object is instantiated only for a VPL
+       which is cross-connected to other VPLs
+       that belong to the same VPC.  All such
+       associated VPLs have the same value of this
+       object, and all their cross-connections are
+       identified either by entries that are indexed
+       by the same value of atmVpCrossConnectIndex in
+       the atmVpCrossConnectTable of this MIB module or by
+       the same value of the cross-connect index in
+       the cross-connect table for SVCs and Soft PVCs
+       (defined in a separate MIB module).
+       At no time should entries in these respective
+       cross-connect tables exist simultaneously
+       with the same cross-connect index value.
+
+       The value of this object is initialized by the
+       agent after the associated entries in the
+       atmVpCrossConnectTable have been created."
+     ::= {atmVplEntry 7}
+
+atmVplRowStatus     OBJECT-TYPE
+     SYNTAX         RowStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "This object is used to create, delete
+       or modify a row in this table.
+       To create a new VCL, this object is
+       initially set to 'createAndWait' or
+       'createAndGo'.  This object should not be
+       set to 'active' unless the following columnar
+       objects have been set to their desired value
+       in this row:
+       atmVplReceiveTrafficDescrIndex and
+       atmVplTransmitTrafficDescrIndex.
+       The DESCRIPTION of atmVplEntry provides
+       further guidance to row treatment in this table."
+     DEFVAL { createAndWait }
+     ::= {atmVplEntry 8}
+
+atmVplCastType      OBJECT-TYPE
+     SYNTAX         AtmConnCastType
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The connection topology type."
+     DEFVAL { p2p }
+     ::= {atmVplEntry 9}
+
+atmVplConnKind      OBJECT-TYPE
+     SYNTAX         AtmConnKind
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The use of call control."
+     DEFVAL { pvc }
+     ::= {atmVplEntry 10}
+
+--  ATM Interface Virtual Channel Link (VCL) Table
+
+-- This table contains configuration and state
+-- information of a bi-directional Virtual Channel
+-- Link (VCL) at an ATM interface.
+
+-- This table can be used to create, delete or modify
+-- a VCL that is terminated in an ATM host or switch.
+-- This table can also be
+-- used to create, delete or modify a VCL that is
+-- cross-connected to another VCL.
+
+--  The ATM Interface VCL Table
+
+atmVclTable         OBJECT-TYPE
+     SYNTAX         SEQUENCE OF AtmVclEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The Virtual Channel Link (VCL) table.  A
+       bi-directional VCL is modeled as one entry
+       in this table. This table can be used for
+       PVCs, SVCs and Soft PVCs."
+     ::= { atmMIBObjects 7}
+
+atmVclEntry         OBJECT-TYPE
+     SYNTAX         AtmVclEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "An entry in the VCL table. This entry is
+       used to model a bi-directional VCL.
+       To create a VCL at an ATM interface,
+       either of the following procedures are used:
+
+       Negotiated VCL establishment
+
+     (1) The management application creates
+         a VCL entry in the atmVclTable
+         by setting atmVclRowStatus to createAndWait(5).
+         This may fail for the following reasons:
+         - The selected VPI/VCI values are unavailable,
+         - The selected VPI/VCI values are in use.
+         Otherwise, the agent creates a row and
+         reserves the VPI/VCI values on that port.
+
+     (2) The manager selects an existing row(s) in the
+         atmTrafficDescrParamTable,
+         thereby, selecting a set of self-consistent
+         ATM traffic parameters and the service category
+         for receive and transmit directions of the VCL.
+
+    (2a) If no suitable row(s) in the
+         atmTrafficDescrParamTable exists,
+         the manager must create a new row(s)
+         in that table.
+
+    (2b) The manager characterizes the VCL's traffic
+         parameters through setting the
+         atmVclReceiveTrafficDescrIndex and the
+         atmVclTransmitTrafficDescrIndex values
+         in the VCL table, which point to the rows
+         containing desired ATM traffic parameter values
+         in the atmTrafficDescrParamTable.  The agent
+         will check the availability of resources and
+         may refuse the request.
+         If the transmit and receive service categories
+         are inconsistent, the agent should refuse the
+         request.
+
+     (3) The manager activates the VCL by setting the
+         the atmVclRowStatus to active(1) (for
+         requirements on this activation see the
+         description of atmVclRowStatus).
+         If this set is successful, the agent has
+         reserved the resources to satisfy the requested
+         traffic parameter values and the service category
+         for that VCL.
+     (4) If the VCL terminates a VCC in the ATM host
+         or switch, the manager turns on the
+         atmVclAdminStatus to up(1) to turn the VCL
+         traffic flow on.  Otherwise, the
+         atmVcCrossConnectTable  must be used
+         to cross-connect the VCL to another VCL(s)
+         in an ATM switch or network.
+
+      One-Shot VCL Establishment
+
+      A VCL may also be established in one step by a
+      set-request with all necessary VCL parameter
+      values and atmVclRowStatus set to createAndGo(4).
+
+      In contrast to the negotiated VCL establishment
+      which allows for detailed error checking
+      (i.e., set errors are explicitly linked to
+      particular resource acquisition failures),
+      the one-shot VCL establishment
+      performs the setup on one operation but
+      does not have the advantage of step-wise
+      error checking.
+
+      VCL Retirement
+
+      A VCL is released by setting atmVclRowStatus to
+      destroy(6), and the agent may release all
+      associated resources."
+     INDEX  {ifIndex, atmVclVpi, atmVclVci }
+     ::= { atmVclTable  1}
+
+AtmVclEntry    ::= SEQUENCE  {
+     atmVclVpi                     AtmVpIdentifier,
+     atmVclVci                     AtmVcIdentifier,
+     atmVclAdminStatus             AtmVorXAdminStatus,
+     atmVclOperStatus              AtmVorXOperStatus,
+     atmVclLastChange              AtmVorXLastChange,
+     atmVclReceiveTrafficDescrIndex
+                           AtmTrafficDescrParamIndex,
+     atmVclTransmitTrafficDescrIndex
+                           AtmTrafficDescrParamIndex,
+     atmVccAalType                 INTEGER,
+     atmVccAal5CpcsTransmitSduSize INTEGER,
+     atmVccAal5CpcsReceiveSduSize  INTEGER,
+     atmVccAal5EncapsType          INTEGER,
+     atmVclCrossConnectIdentifier  INTEGER,
+     atmVclRowStatus               RowStatus,
+     atmVclCastType                AtmConnCastType,
+     atmVclConnKind                AtmConnKind
+            }
+
+atmVclVpi           OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value of the VCL."
+     ::= { atmVclEntry 1}
+
+atmVclVci           OBJECT-TYPE
+     SYNTAX         AtmVcIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VCI value of the VCL."
+     ::= { atmVclEntry 2}
+
+atmVclAdminStatus   OBJECT-TYPE
+     SYNTAX         AtmVorXAdminStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "This object is instanciated only for a VCL which
+       terminates a VCC (i.e., one which is NOT
+       cross-connected to other VCLs). Its value
+       specifies the desired administrative state of
+       the VCL."
+     DEFVAL { down }
+     ::= { atmVclEntry 3}
+
+atmVclOperStatus    OBJECT-TYPE
+     SYNTAX         AtmVorXOperStatus
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The current operational status of the VCL."
+     ::= { atmVclEntry 4}
+
+atmVclLastChange    OBJECT-TYPE
+     SYNTAX         AtmVorXLastChange
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The value of sysUpTime at the time this VCL
+       entered its current operational state."
+     ::= { atmVclEntry 5 }
+
+atmVclReceiveTrafficDescrIndex  OBJECT-TYPE
+     SYNTAX         AtmTrafficDescrParamIndex
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The value of this object identifies the row
+       in the ATM Traffic Descriptor Table which
+       applies to the receive direction of this VCL."
+     DEFVAL { 0 }
+      ::= { atmVclEntry 6}
+
+atmVclTransmitTrafficDescrIndex  OBJECT-TYPE
+     SYNTAX         AtmTrafficDescrParamIndex
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The value of this object identifies the row
+       of the ATM Traffic Descriptor Table which applies
+       to the transmit direction of this VCL."
+     DEFVAL { 0 }
+      ::= { atmVclEntry 7}
+
+atmVccAalType       OBJECT-TYPE
+     SYNTAX         INTEGER {
+                       aal1(1),
+                       aal34(2),
+                       aal5(3),
+                       other(4),
+                       unknown(5),
+                       aal2(6)
+                         }
+     MAX-ACCESS    read-create
+     STATUS        current
+     DESCRIPTION
+      "An instance of this object only exists when the
+       local VCL end-point is also the VCC end-point,
+       and AAL is in use.
+       The type of AAL used on this VCC.
+       The AAL type includes AAL1, AAL2, AAL3/4,
+       and AAL5. The other(4) may be user-defined
+       AAL type.  The unknown type indicates that
+       the AAL type cannot be determined."
+     DEFVAL { aal5 }
+     ::= { atmVclEntry 8 }
+
+atmVccAal5CpcsTransmitSduSize OBJECT-TYPE
+     SYNTAX         INTEGER (1..65535)
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "An instance of this object only exists when the
+       local VCL end-point is also the VCC end-point,
+       and AAL5 is in use.
+       The maximum AAL5 CPCS SDU size in octets that is
+       supported on the transmit direction of this VCC."
+     DEFVAL { 9188 }
+           ::= { atmVclEntry 9 }
+
+atmVccAal5CpcsReceiveSduSize OBJECT-TYPE
+     SYNTAX         INTEGER (1..65535)
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "An instance of this object only exists when the
+       local VCL end-point is also the VCC end-point,
+       and AAL5 is in use.
+       The maximum AAL5 CPCS SDU size in octets that is
+       supported on the receive direction of this VCC."
+     DEFVAL { 9188 }
+           ::= { atmVclEntry 10 }
+
+atmVccAal5EncapsType  OBJECT-TYPE
+     SYNTAX         INTEGER {
+                    vcMultiplexRoutedProtocol(1),
+                    vcMultiplexBridgedProtocol8023(2),
+                    vcMultiplexBridgedProtocol8025(3),
+                    vcMultiplexBridgedProtocol8026(4),
+                    vcMultiplexLANemulation8023(5),
+                    vcMultiplexLANemulation8025(6),
+                    llcEncapsulation(7),
+                    multiprotocolFrameRelaySscs(8),
+                    other(9),
+                    unknown(10)
+                       }
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "An instance of this object only exists when the
+       local VCL end-point is also the VCC end-point,
+       and AAL5 is in use.
+       The type of data encapsulation used over
+       the AAL5 SSCS layer. The definitions reference
+       RFC 1483 Multiprotocol Encapsulation
+       over ATM AAL5 and to the ATM Forum
+       LAN Emulation specification."
+     DEFVAL { llcEncapsulation }
+           ::= { atmVclEntry 11 }
+
+atmVclCrossConnectIdentifier   OBJECT-TYPE
+     SYNTAX         INTEGER (0..2147483647)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This object is instantiated only for a VCL
+       which is cross-connected to other VCLs
+       that belong to the same VCC.  All such
+       associated VCLs have the same value of this
+       object, and all their cross-connections are
+       identified either by entries that are indexed
+       by the same value of atmVcCrossConnectIndex in
+       the atmVcCrossConnectTable of this MIB module or by
+       the same value of the cross-connect index in
+       the cross-connect table for SVCs and Soft PVCs
+       (defined in a separate MIB module).
+
+       At no time should entries in these respective
+       cross-connect tables exist simultaneously
+       with the same cross-connect index value.
+
+       The value of this object is initialized by the
+       agent after the associated entries in the
+       atmVcCrossConnectTable have been created."
+     ::= {atmVclEntry 12}
+
+atmVclRowStatus     OBJECT-TYPE
+     SYNTAX         RowStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "This object is used to create, delete or
+       modify a row in this table.  To create
+       a new VCL, this object is initially set
+       to 'createAndWait' or 'createAndGo'.
+       This object should not be
+       set to 'active' unless the following columnar
+       objects have been set to their desired value
+       in this row:
+       atmVclReceiveTrafficDescrIndex,
+       atmVclTransmitTrafficDescrIndex.
+       In addition, if the local VCL end-point
+       is also the VCC end-point:
+       atmVccAalType.
+       In addition, for AAL5 connections only:
+       atmVccAal5CpcsTransmitSduSize,
+       atmVccAal5CpcsReceiveSduSize, and
+       atmVccAal5EncapsType. (The existence
+       of these objects imply the AAL connection type.).
+       The DESCRIPTION of atmVclEntry provides
+       further guidance to row treatment in this table."
+     DEFVAL { createAndWait }
+           ::= {atmVclEntry 13}
+
+atmVclCastType      OBJECT-TYPE
+     SYNTAX         AtmConnCastType
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The connection topology type."
+     DEFVAL { p2p }
+           ::= {atmVclEntry 14}
+
+atmVclConnKind      OBJECT-TYPE
+     SYNTAX         AtmConnKind
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The use of call control."
+     DEFVAL { pvc }
+     ::= {atmVclEntry 15}
+
+--     ATM Virtual Path (VP) Cross Connect Table
+
+-- This table contains configuration and state
+-- information of point-to-point,
+-- point-to-multipoint, or multipoint-to-multipoint
+-- VP cross-connects for PVCs.
+
+-- This table has read-create access and can be used
+-- to cross-connect the VPLs together in an ATM switch
+-- or network. The atmVpCrossConnectIndex
+-- is used to associate the related
+-- VPLs that are cross-connected together.
+
+-- The ATM VP Cross Connect Table
+-- models each bi-directional VPC
+-- cross-connect as a set of entries in
+-- the atmVpCrossConnectTable. A
+-- point-to-point VPC cross-connect is modeled
+-- as one entry; a point-to-multipoint (N leafs) VPC
+-- cross-connect as N entries in this table; and
+-- a multipoint-to-multipoint (N parties) VPC cross-
+-- connect as N(N-1)/2 entries in this table.
+-- In the latter cases, all the N (or N(N-1)/2) entries
+-- are associated with a single VPC cross-connect by
+-- having the same value of atmVpCrossConnectIndex.
+
+--      _________________________________________
+--      |                                       |
+--  Low |         ATM Switch or Network         | High
+--  port|                                       | port
+-- _____|>> from low to high VPC traffic flow >>|______
+--      |<< from high to low VPC traffic flow <<|
+--      |                                       |
+--      |_______________________________________|
+--
+
+-- The terms low and high are chosen to represent
+-- numerical ordering of the two interfaces associated
+-- with a VPC cross-connect. That is, the ATM interface
+-- with the lower value of ifIndex is termed 'low',
+-- while the other ATM interface associated with the
+-- VPC cross-connect is termed 'high'. This terminology
+
+-- is used to provide directional information; for
+-- example, the atmVpCrossConnectL2HOperStatus applies
+-- to the low->high direction, and
+-- atmVpCrossConnectH2LOperStatus applies to the
+-- high->low  direction, as illustrated above.
+
+atmVpCrossConnectIndexNext  OBJECT-TYPE
+     SYNTAX         INTEGER (0..2147483647)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This object contains an appropriate value to
+       be used for atmVpCrossConnectIndex when creating
+       entries in the atmVpCrossConnectTable.  The value
+       0 indicates that no unassigned entries are
+       available. To obtain the atmVpCrossConnectIndex
+       value for a new entry, the manager issues a
+       management protocol retrieval operation to obtain
+       the current value of this object.  After each
+       retrieval, the agent should modify the value to
+       the next unassigned index.
+       After a manager retrieves a value the agent will
+       determine through its local policy when this index
+       value will be made available for reuse."
+     ::= { atmMIBObjects 8 }
+
+--  The ATM VP Cross Connect Table
+
+atmVpCrossConnectTable OBJECT-TYPE
+     SYNTAX         SEQUENCE OF AtmVpCrossConnectEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The ATM VP Cross Connect table for PVCs.
+       An entry in this table models two
+       cross-connected VPLs.
+       Each VPL must have its atmConnKind set
+       to pvc(1)."
+     ::= { atmMIBObjects 9 }
+
+atmVpCrossConnectEntry OBJECT-TYPE
+     SYNTAX         AtmVpCrossConnectEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "An entry in the ATM VP Cross Connect table.
+       This entry is used to model a bi-directional
+       ATM VP cross-connect which cross-connects
+       two VPLs.
+
+       Step-wise Procedures to set up a VP Cross-connect
+
+       Once the entries in the atmVplTable are created,
+       the following procedures are used
+       to cross-connect the VPLs together.
+
+      (1) The manager obtains a unique
+          atmVpCrossConnectIndex by reading the
+          atmVpCrossConnectIndexNext object.
+
+      (2) Next, the manager creates a set of one
+          or more rows in the ATM VP Cross Connect
+          Table, one for each cross-connection between
+          two VPLs.  Each row is indexed by the ATM
+          interface port numbers and VPI values of the
+          two ends of that cross-connection.
+          This set of rows specifies the topology of the
+          VPC cross-connect and is identified by a single
+          value of atmVpCrossConnectIndex.
+
+       Negotiated VP Cross-Connect Establishment
+
+     (2a) The manager creates a row in this table by
+          setting atmVpCrossConnectRowStatus to
+          createAndWait(5).  The agent checks the
+          requested topology and the mutual sanity of
+          the ATM traffic parameters and
+          service categories, i.e., the row creation
+          fails if:
+          - the requested topology is incompatible with
+            associated values of atmVplCastType,
+          - the requested topology is not supported
+            by the agent,
+          - the traffic/service category parameter values
+            associated with the requested row are
+            incompatible with those of already existing
+            rows for this VP cross-connect.
+          [For example, for setting up
+          a point-to-point VP cross-connect, the
+          ATM traffic parameters in the receive direction
+
+          of a VPL at the low end of the cross-connect
+          must equal to the traffic parameters in the
+          transmit direction of the other VPL at the
+          high end of the cross-connect,
+          otherwise, the row creation fails.]
+          The agent also checks for internal errors
+          in building the cross-connect.
+
+          The atmVpCrossConnectIndex values in the
+          corresponding atmVplTable rows are filled
+          in by the agent at this point.
+
+     (2b) The manager promotes the row in the
+          atmVpCrossConnectTable by setting
+          atmVpCrossConnectRowStatus to active(1).  If
+          this set is successful, the agent has reserved
+          the resources specified by the ATM traffic
+          parameter and Service category values
+          for each direction of the VP cross-connect
+          in an ATM switch or network.
+
+      (3) The manager sets the
+          atmVpCrossConnectAdminStatus to up(1) in all
+          rows of this VP cross-connect to turn the
+          traffic flow on.
+
+       One-Shot VP Cross-Connect Establishment
+
+       A VP cross-connect may also be established in
+       one step by a set-request with all necessary
+       parameter values and atmVpCrossConnectRowStatus
+       set to createAndGo(4).
+
+       In contrast to the negotiated VP cross-connect
+       establishment which allows for detailed error
+       checking (i.e., set errors are explicitly linked
+       to particular resource acquisition failures),
+       the one-shot VP cross-connect establishment
+       performs the setup on one operation but does not
+       have the advantage of step-wise error checking.
+
+       VP Cross-Connect Retirement
+
+       A VP cross-connect identified by a particular
+       value of atmVpCrossConnectIndex is released by:
+
+      (1) Setting atmVpCrossConnectRowStatus of all
+
+          rows identified by this value of
+          atmVpCrossConnectIndex to destroy(6).
+          The agent may release all
+          associated resources, and the
+          atmVpCrossConnectIndex values in the
+          corresponding atmVplTable row are removed.
+          Note that a situation when only a subset of
+          the associated rows are deleted corresponds
+          to a VP topology change.
+
+      (2) After deletion of the appropriate
+          atmVpCrossConnectEntries, the manager may
+          set atmVplRowStatus to destroy(6) the
+          associated VPLs.  The agent releases
+          the resources and removes the associated
+          rows in the atmVplTable.
+
+       VP Cross-connect Reconfiguration
+
+       At the discretion of the agent, a VP
+       cross-connect may be reconfigured by
+       adding and/or deleting leafs to/from
+       the VP topology as per the VP cross-connect
+       establishment/retirement procedures.
+       Reconfiguration of traffic/service category parameter
+       values requires release of the VP cross-connect
+       before those parameter values may by changed
+       for individual VPLs."
+     INDEX { atmVpCrossConnectIndex,
+           atmVpCrossConnectLowIfIndex,
+           atmVpCrossConnectLowVpi,
+           atmVpCrossConnectHighIfIndex,
+           atmVpCrossConnectHighVpi }
+     ::= { atmVpCrossConnectTable 1 }
+
+AtmVpCrossConnectEntry ::= SEQUENCE {
+     atmVpCrossConnectIndex          INTEGER,
+     atmVpCrossConnectLowIfIndex     InterfaceIndex,
+     atmVpCrossConnectLowVpi         AtmVpIdentifier,
+     atmVpCrossConnectHighIfIndex    InterfaceIndex,
+     atmVpCrossConnectHighVpi        AtmVpIdentifier,
+     atmVpCrossConnectAdminStatus    AtmVorXAdminStatus,
+     atmVpCrossConnectL2HOperStatus  AtmVorXOperStatus,
+     atmVpCrossConnectH2LOperStatus  AtmVorXOperStatus,
+     atmVpCrossConnectL2HLastChange  AtmVorXLastChange,
+     atmVpCrossConnectH2LLastChange  AtmVorXLastChange,
+     atmVpCrossConnectRowStatus      RowStatus
+             }
+
+atmVpCrossConnectIndex OBJECT-TYPE
+     SYNTAX         INTEGER (1..2147483647)
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "A unique value to identify this VP cross-connect.
+       For each VPL associated with this cross-connect,
+       the agent reports this cross-connect index value
+       in the atmVplCrossConnectIdentifier attribute of
+       the corresponding atmVplTable entries."
+     ::= { atmVpCrossConnectEntry 1 }
+
+atmVpCrossConnectLowIfIndex OBJECT-TYPE
+     SYNTAX         InterfaceIndex
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The ifIndex value of the ATM interface for
+       this VP cross-connect. The term low implies
+       that this ATM interface has the numerically lower
+       ifIndex value than the other ATM interface
+       identified in the same atmVpCrossConnectEntry."
+     ::= { atmVpCrossConnectEntry 2 }
+
+atmVpCrossConnectLowVpi OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value at the ATM interface
+       associated with the VP cross-connect that is
+       identified by atmVpCrossConnectLowIfIndex."
+     ::= { atmVpCrossConnectEntry 3 }
+
+atmVpCrossConnectHighIfIndex OBJECT-TYPE
+     SYNTAX         InterfaceIndex
+     MAX-ACCESS     not-accessible
+     STATUS  current
+     DESCRIPTION
+      "The ifIndex value of the ATM interface for
+       this VP cross-connect. The term high implies that
+       this ATM interface has the numerically higher
+       ifIndex value than the  other ATM interface
+       identified in the same atmVpCrossConnectEntry."
+     ::= { atmVpCrossConnectEntry 4 }
+
+atmVpCrossConnectHighVpi OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value at the ATM interface
+       associated with the VP cross-connect that is
+       identified by atmVpCrossConnectHighIfIndex."
+     ::= { atmVpCrossConnectEntry 5 }
+
+atmVpCrossConnectAdminStatus OBJECT-TYPE
+     SYNTAX         AtmVorXAdminStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The desired administrative status of this
+       bi-directional VP cross-connect."
+     DEFVAL { down }
+     ::= { atmVpCrossConnectEntry 6 }
+
+atmVpCrossConnectL2HOperStatus OBJECT-TYPE
+     SYNTAX         AtmVorXOperStatus
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The operational status of the VP cross-connect
+       in one direction; (i.e., from the low to
+       high direction)."
+     ::= { atmVpCrossConnectEntry 7 }
+
+atmVpCrossConnectH2LOperStatus OBJECT-TYPE
+     SYNTAX         AtmVorXOperStatus
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The operational status of the VP cross-connect
+       in one direction; (i.e., from the high to
+       low direction)."
+     ::= { atmVpCrossConnectEntry 8 }
+
+atmVpCrossConnectL2HLastChange OBJECT-TYPE
+     SYNTAX         AtmVorXLastChange
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The value of sysUpTime at the time this
+       VP cross-connect entered its current operational
+       state in the low to high direction."
+     ::= { atmVpCrossConnectEntry 9 }
+
+atmVpCrossConnectH2LLastChange OBJECT-TYPE
+     SYNTAX         AtmVorXLastChange
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+       "The value of sysUpTime at the time this
+       VP cross-connect entered its current operational
+       in the high to low direction."
+     ::= { atmVpCrossConnectEntry 10 }
+
+atmVpCrossConnectRowStatus OBJECT-TYPE
+     SYNTAX         RowStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The status of this entry in the
+       atmVpCrossConnectTable.  This object is used to
+       create a cross-connect for cross-connecting
+       VPLs which are created using the atmVplTable
+       or to change or delete an existing cross-connect.
+       This object must be initially set
+       to `createAndWait' or 'createAndGo'.
+       To turn on a VP cross-connect,
+       the atmVpCrossConnectAdminStatus
+       is set to `up'."
+     DEFVAL { createAndWait }
+     ::= { atmVpCrossConnectEntry 11 }
+
+--     ATM Virtual Channel (VC) Cross Connect Table
+
+-- This table contains configuration and state
+-- information of point-to-point,
+-- point-to-multipoint or multipoint-to-multipoint
+-- VC cross-connects for PVCs.
+
+-- This table has read-create access and is used
+-- to cross-connect the VCLs together in an ATM switch
+-- or network that belong to a VC connection.
+-- The atmVcCrossConnectIndex is used to associate
+-- the related VCLs that are cross-connected together.
+
+-- The model using step-wise procedures described for setting
+-- up a VP cross-connect is also used for setting up
+-- a VC cross-connect.
+
+atmVcCrossConnectIndexNext  OBJECT-TYPE
+     SYNTAX         INTEGER (0..2147483647)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This object contains an appropriate value to
+       be used for atmVcCrossConnectIndex when creating
+       entries in the atmVcCrossConnectTable.  The value
+       0 indicates that no unassigned entries are
+       available. To obtain the atmVcCrossConnectIndex
+       value for a new entry, the manager issues a
+       management protocol retrieval operation to obtain
+       the current value of this object.  After each
+       retrieval, the agent should modify the value to
+       the next unassigned index.
+       After a manager retrieves a value the agent will
+       determine through its local policy when this index
+       value will be made available for reuse."
+     ::= { atmMIBObjects 10 }
+
+--  The ATM VC Cross Connect Table
+
+atmVcCrossConnectTable OBJECT-TYPE
+     SYNTAX         SEQUENCE OF AtmVcCrossConnectEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The ATM VC Cross Connect table for PVCs.
+       An entry in this table models two
+       cross-connected VCLs.
+       Each VCL must have its atmConnKind set
+       to pvc(1)."
+     ::= { atmMIBObjects 11 }
+
+atmVcCrossConnectEntry OBJECT-TYPE
+     SYNTAX       AtmVcCrossConnectEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+      "An entry in the ATM VC Cross Connect table.
+       This entry is used to model a bi-directional ATM
+       VC cross-connect cross-connecting two end points.
+
+       Step-wise Procedures to set up a VC Cross-connect
+
+       Once the entries in the atmVclTable are created,
+       the following procedures are used
+       to cross-connect the VCLs together to
+       form a VCC segment.
+
+      (1) The manager obtains a unique
+          atmVcCrossConnectIndex by reading the
+          atmVcCrossConnectIndexNext object.
+
+      (2) Next, the manager creates a set of one
+          or more rows in the ATM VC Cross Connect
+          Table, one for each cross-connection between
+          two VCLs.  Each row is indexed by the ATM
+          interface port numbers and VPI/VCI values of
+          the two ends of that cross-connection.
+          This set of rows specifies the topology of the
+          VCC cross-connect and is identified by a single
+          value of atmVcCrossConnectIndex.
+
+       Negotiated VC Cross-Connect Establishment
+
+     (2a) The manager creates a row in this table by
+          setting atmVcCrossConnectRowStatus to
+          createAndWait(5).  The agent checks the
+          requested topology and the mutual sanity of
+          the ATM traffic parameters and
+          service categories, i.e., the row creation
+          fails if:
+          - the requested topology is incompatible with
+            associated values of atmVclCastType,
+          - the requested topology is not supported
+            by the agent,
+          - the traffic/service category parameter values
+            associated with the requested row are
+            incompatible with those of already existing
+            rows for this VC cross-connect.
+          [For example, for setting up
+          a point-to-point VC cross-connect, the
+          ATM traffic parameters in the receive direction
+          of a VCL at the low end of the cross-connect
+          must equal to the traffic parameters in the
+          transmit direction of the other VCL at the
+          high end of the cross-connect,
+          otherwise, the row creation fails.]
+          The agent also checks for internal errors
+          in building the cross-connect.
+
+          The atmVcCrossConnectIndex values in the
+
+          corresponding atmVclTable rows are filled
+          in by the agent at this point.
+
+     (2b) The manager promotes the row in the
+          atmVcCrossConnectTable by setting
+          atmVcCrossConnectRowStatus to active(1).  If
+          this set is successful, the agent has reserved
+          the resources specified by the ATM traffic
+          parameter and Service category values
+          for each direction of the VC cross-connect
+          in an ATM switch or network.
+
+      (3) The manager sets the
+          atmVcCrossConnectAdminStatus to up(1)
+          in all rows of this VC cross-connect to
+          turn the traffic flow on.
+
+       One-Shot VC Cross-Connect Establishment
+
+       A VC cross-connect may also be established in
+       one step by a set-request with all necessary
+       parameter values and atmVcCrossConnectRowStatus
+       set to createAndGo(4).
+
+       In contrast to the negotiated VC cross-connect
+       establishment which allows for detailed error
+       checking i.e., set errors are explicitly linked to
+       particular resource acquisition failures), the
+       one-shot VC cross-connect establishment
+       performs the setup on one operation but does
+       not have the advantage of step-wise error
+       checking.
+
+       VC Cross-Connect Retirement
+
+       A VC cross-connect identified by a particular
+       value of atmVcCrossConnectIndex is released by:
+
+      (1) Setting atmVcCrossConnectRowStatus of all rows
+          identified by this value of
+          atmVcCrossConnectIndex to destroy(6).
+          The agent may release all
+          associated resources, and the
+          atmVcCrossConnectIndex values in the
+          corresponding atmVclTable row are removed.
+          Note that a situation when only a subset of
+          the associated rows are deleted corresponds
+
+          to a VC topology change.
+
+      (2) After deletion of the appropriate
+          atmVcCrossConnectEntries, the manager may
+          set atmVclRowStatus to destroy(6) the
+          associated VCLs.  The agent releases
+          the resources and removes the associated
+          rows in the atmVclTable.
+
+       VC Cross-Connect Reconfiguration
+
+       At the discretion of the agent, a VC
+       cross-connect may be reconfigured by
+       adding and/or deleting leafs to/from
+       the VC topology as per the VC cross-connect
+       establishment/retirement procedures.
+       Reconfiguration of traffic/service category parameter
+       values requires release of the VC cross-connect
+       before those parameter values may by changed
+       for individual VCLs."
+     INDEX { atmVcCrossConnectIndex,
+           atmVcCrossConnectLowIfIndex,
+           atmVcCrossConnectLowVpi,
+           atmVcCrossConnectLowVci,
+           atmVcCrossConnectHighIfIndex,
+           atmVcCrossConnectHighVpi,
+           atmVcCrossConnectHighVci }
+     ::= { atmVcCrossConnectTable 1 }
+
+AtmVcCrossConnectEntry ::= SEQUENCE {
+     atmVcCrossConnectIndex          INTEGER,
+     atmVcCrossConnectLowIfIndex     InterfaceIndex,
+     atmVcCrossConnectLowVpi         AtmVpIdentifier,
+     atmVcCrossConnectLowVci         AtmVcIdentifier,
+     atmVcCrossConnectHighIfIndex    InterfaceIndex,
+     atmVcCrossConnectHighVpi        AtmVpIdentifier,
+     atmVcCrossConnectHighVci        AtmVcIdentifier,
+     atmVcCrossConnectAdminStatus    AtmVorXAdminStatus,
+     atmVcCrossConnectL2HOperStatus  AtmVorXOperStatus,
+     atmVcCrossConnectH2LOperStatus  AtmVorXOperStatus,
+     atmVcCrossConnectL2HLastChange  AtmVorXLastChange,
+     atmVcCrossConnectH2LLastChange  AtmVorXLastChange,
+     atmVcCrossConnectRowStatus      RowStatus
+             }
+
+atmVcCrossConnectIndex OBJECT-TYPE
+     SYNTAX         INTEGER (1..2147483647)
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "A unique value to identify this VC cross-connect.
+       For each VCL associated with this cross-connect,
+       the agent reports this cross-connect index value
+       in the atmVclCrossConnectIdentifier attribute of
+       the corresponding atmVclTable entries."
+     ::= { atmVcCrossConnectEntry 1 }
+
+atmVcCrossConnectLowIfIndex OBJECT-TYPE
+     SYNTAX         InterfaceIndex
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The ifIndex value of the ATM interface for this
+       VC cross-connect. The term low implies
+       that this ATM interface has the numerically lower
+       ifIndex value than the other ATM interface
+       identified in the same atmVcCrossConnectEntry."
+     ::= { atmVcCrossConnectEntry 2 }
+
+atmVcCrossConnectLowVpi OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value at the ATM interface
+       associated with the VC cross-connect that is
+       identified by atmVcCrossConnectLowIfIndex."
+     ::= { atmVcCrossConnectEntry 3 }
+
+atmVcCrossConnectLowVci OBJECT-TYPE
+     SYNTAX         AtmVcIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VCI value at the ATM interface
+       associated with this VC cross-connect that is
+       identified by atmVcCrossConnectLowIfIndex."
+     ::= { atmVcCrossConnectEntry 4 }
+
+atmVcCrossConnectHighIfIndex OBJECT-TYPE
+     SYNTAX         InterfaceIndex
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The ifIndex value for the ATM interface for
+       this VC cross-connect. The term high implies
+
+       that this ATM interface has the numerically higher
+       ifIndex value than the other ATM interface
+       identified in the same atmVcCrossConnectEntry."
+     ::= { atmVcCrossConnectEntry 5 }
+
+atmVcCrossConnectHighVpi OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value at the ATM interface
+       associated with the VC cross-connect that is
+       identified by atmVcCrossConnectHighIfIndex."
+     ::= { atmVcCrossConnectEntry 6 }
+
+atmVcCrossConnectHighVci OBJECT-TYPE
+     SYNTAX         AtmVcIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VCI value at the ATM interface
+       associated with the VC cross-connect that is
+       identified by atmVcCrossConnectHighIfIndex."
+     ::= { atmVcCrossConnectEntry 7 }
+
+atmVcCrossConnectAdminStatus OBJECT-TYPE
+     SYNTAX         AtmVorXAdminStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The desired administrative status of this
+       bi-directional VC cross-connect."
+     DEFVAL { down }
+     ::= { atmVcCrossConnectEntry 8 }
+
+atmVcCrossConnectL2HOperStatus OBJECT-TYPE
+     SYNTAX         AtmVorXOperStatus
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The current operational status of the
+       VC cross-connect in one direction; (i.e.,
+       from the low to high direction)."
+     ::= { atmVcCrossConnectEntry 9 }
+
+atmVcCrossConnectH2LOperStatus OBJECT-TYPE
+     SYNTAX         AtmVorXOperStatus
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The current operational status of the
+       VC cross-connect in one direction; (i.e.,
+       from the high to low direction)."
+     ::= { atmVcCrossConnectEntry 10 }
+
+atmVcCrossConnectL2HLastChange OBJECT-TYPE
+     SYNTAX         AtmVorXLastChange
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The value of sysUpTime at the time this
+       VC cross-connect entered its current
+       operational state in low to high direction."
+     ::= { atmVcCrossConnectEntry 11 }
+
+atmVcCrossConnectH2LLastChange OBJECT-TYPE
+     SYNTAX         AtmVorXLastChange
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The value of sysUpTime at the time this
+       VC cross-connect entered its current
+       operational state in high to low direction."
+     ::= { atmVcCrossConnectEntry 12 }
+
+atmVcCrossConnectRowStatus OBJECT-TYPE
+     SYNTAX         RowStatus
+     MAX-ACCESS     read-create
+     STATUS         current
+     DESCRIPTION
+      "The status of this entry in the
+       atmVcCrossConnectTable.  This object is used to
+       create a new cross-connect for cross-connecting
+       VCLs which are created using the atmVclTable
+       or to change or delete existing cross-connect.
+       This object must be initially set to
+       `createAndWait' or 'createAndGo'.
+       To turn on a VC cross-connect,
+       the atmVcCrossConnectAdminStatus
+       is set to `up'."
+     DEFVAL { createAndWait }
+     ::= { atmVcCrossConnectEntry 13 }
+
+-- AAL5 Virtual Channel Connection Performance Statistics
+
+-- Table
+
+-- This table contains the AAL5
+-- performance statistics of a VCC at the
+-- interface associated with an AAL5 entity in an ATM
+-- host or ATM switch.
+
+aal5VccTable        OBJECT-TYPE
+     SYNTAX         SEQUENCE OF Aal5VccEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This table contains AAL5 VCC performance
+       parameters."
+     ::= { atmMIBObjects 12 }
+
+aal5VccEntry        OBJECT-TYPE
+     SYNTAX         Aal5VccEntry
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "This list contains the AAL5 VCC
+       performance parameters and is indexed
+       by ifIndex values of AAL5 interfaces
+       and the associated VPI/VCI values."
+     INDEX { ifIndex, aal5VccVpi, aal5VccVci }
+     ::= { aal5VccTable 1 }
+
+Aal5VccEntry    ::= SEQUENCE  {
+     aal5VccVpi             AtmVpIdentifier,
+     aal5VccVci             AtmVcIdentifier,
+     aal5VccCrcErrors       Counter32,
+     aal5VccSarTimeOuts     Counter32,
+     aal5VccOverSizedSDUs   Counter32
+          }
+
+aal5VccVpi          OBJECT-TYPE
+     SYNTAX         AtmVpIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VPI value of the AAL5 VCC at the
+       interface identified by the ifIndex."
+     ::= { aal5VccEntry 1 }
+
+aal5VccVci          OBJECT-TYPE
+     SYNTAX         AtmVcIdentifier
+     MAX-ACCESS     not-accessible
+     STATUS         current
+     DESCRIPTION
+      "The VCI value of the AAL5 VCC at the
+       interface identified by the ifIndex."
+     ::= { aal5VccEntry 2 }
+
+aal5VccCrcErrors    OBJECT-TYPE
+     SYNTAX         Counter32
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of AAL5 CPCS PDUs received with
+       CRC-32 errors on this AAL5 VCC at the
+       interface associated with an AAL5 entity."
+     ::= { aal5VccEntry 3 }
+
+aal5VccSarTimeOuts  OBJECT-TYPE
+     SYNTAX         Counter32
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of partially re-assembled AAL5
+       CPCS PDUs which were discarded
+       on this AAL5 VCC at the interface associated
+       with an AAL5 entity because they
+       were not fully re-assembled within the
+       required time period.  If the re-assembly
+       timer is not supported, then this object
+       contains a zero value."
+     ::= { aal5VccEntry 4 }
+
+aal5VccOverSizedSDUs OBJECT-TYPE
+     SYNTAX         Counter32
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "The number of AAL5 CPCS PDUs discarded
+       on this AAL5 VCC at the interface
+       associated with an AAL5 entity because the
+       AAL5 SDUs were too large."
+     ::= { aal5VccEntry 5 }
+
+--
+-- The following object may be used in conjunction with
+-- the atmTrafficDescrParamTable for the creation of
+
+-- new table entries.
+--
+
+atmTrafficDescrParamIndexNext  OBJECT-TYPE
+     SYNTAX         INTEGER (0..2147483647)
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+      "This object contains an appropriate value to
+       be used for atmTrafficDescrParamIndex when
+       creating entries in the
+       atmTrafficDescrParamTable.
+       The value 0 indicates that no unassigned
+       entries are available. To obtain the
+       atmTrafficDescrParamIndex value for a new
+       entry, the manager issues a management
+       protocol retrieval operation to obtain the
+       current value of this object.  After each
+       retrieval, the agent should modify the value
+       to the next unassigned index.
+       After a manager retrieves a value the agent will
+       determine through its local policy when this index
+       value will be made available for reuse."
+     ::= { atmMIBObjects 13 }
+
+-- Conformance Information
+
+atmMIBConformance   OBJECT IDENTIFIER ::= { atmMIB 2 }
+
+atmMIBGroups        OBJECT IDENTIFIER
+                           ::= { atmMIBConformance 1 }
+atmMIBCompliances   OBJECT IDENTIFIER
+                           ::= { atmMIBConformance 2 }
+
+-- Compliance Statements
+
+atmMIBCompliance2    MODULE-COMPLIANCE
+     STATUS         current
+     DESCRIPTION
+       "The compliance statement for SNMP entities
+        including networks which have ATM and
+        AAL5 interfaces."
+
+     MODULE -- this module
+--
+-- ****** Interface and Traffic Descriptor Support ***
+
+--
+       MANDATORY-GROUPS  {atmInterfaceConfGroup2,
+                          atmTrafficDescrGroup2 }
+
+       OBJECT         atmInterfaceMaxVpcs
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMaxVccs
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMaxActiveVpiBits
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required.
+          At the ATM UNI the maximum number of
+          active VPI bits configured for use ranges
+          from 0 to 8 only.
+          Implementations may support smaller ranges."
+       OBJECT         atmInterfaceMaxActiveVciBits
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required.
+          Implementations may support smaller ranges."
+
+       OBJECT         atmInterfaceIlmiVpi
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceIlmiVci
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMyNeighborIpAddress
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMyNeighborIfName
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceSubscrAddress
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParamIndexNext
+       DESCRIPTION
+         "This object is only required for systems
+          that support the creation of entries in
+          the atmTrafficDescrParamTable."
+
+       OBJECT         atmTrafficDescrType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam1
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam2
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam3
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam4
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam5
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmServiceCategory
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrRowStatus
+       SYNTAX         INTEGER {active(1)}
+
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       OBJECT         atmTrafficFrameDiscard
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+--
+-- ****** DS3 PLCP Support **************************
+--
+       GROUP          atmInterfaceDs3PlcpGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement the
+          DS3 PLCP layer."
+--
+-- ****** TC Sublayer Support ********************************
+--
+       GROUP          atmInterfaceTCGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement the
+          TC Sublayer."
+
+--
+-- ****** VPC Support *******************************
+--
+       GROUP          atmVpcTerminationGroup2
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VPLs that terminate VPCs (i.e., ones which
+          are NOT cross-connected to other VPLs)."
+
+       GROUP          atmVplCrossConnectGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VPLs that are not associated with VCLs
+          and are cross-connected to other VPLs
+          for VPCs."
+
+       GROUP          atmVpPvcCrossConnectGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VPLs that are not associated with VCLs
+          and are cross-connected to other VPLs
+          for permanent VPCs (i.e., PVCs).
+          This group is not used to crossconnect
+          a PVC with an SVC to form a Soft PVC."
+
+       OBJECT         atmVplAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplReceiveTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplTransmitTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplRowStatus
+       SYNTAX         INTEGER {active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS      read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       OBJECT         atmVplCastType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplConnKind
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVpCrossConnectAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVpCrossConnectRowStatus
+       SYNTAX         INTEGER {active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+--
+-- ****** VCC Support *******************************
+--
+       GROUP          atmVccTerminationGroup2
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VCLs that terminate VCCs (i.e., ones which
+          are NOT cross-connected to other VCLs)."
+
+       GROUP          atmVclCrossConnectGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VCLs that are cross-connected to other VCLs
+          for VCCs."
+
+       GROUP          atmVcPvcCrossConnectGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VCLs that are cross-connected to other
+          VCLs for permanent VCCs (i.e., PVCs).
+          This group is not used to crossconnect
+          a PVC with an SVC to form a Soft PVC."
+
+       OBJECT         atmVclAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclReceiveTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclTransmitTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVccAalType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclRowStatus
+       SYNTAX         INTEGER {active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       OBJECT         atmVclCastType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclConnKind
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVcCrossConnectAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVcCrossConnectRowStatus
+       SYNTAX         INTEGER { active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+--
+-- ****** AAL5 Support ******************************
+--
+       GROUP          aal5VccGroup
+       DESCRIPTION
+         "This group is mandatory for the
+          AAL5 virtual connections only."
+       OBJECT         atmVccAal5CpcsTransmitSduSize
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVccAal5CpcsReceiveSduSize
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVccAal5EncapsType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+        ::= { atmMIBCompliances 2 }
+
+-- Units of Conformance
+
+atmInterfaceDs3PlcpGroup    OBJECT-GROUP
+       OBJECTS {atmInterfaceDs3PlcpSEFSs,
+           atmInterfaceDs3PlcpAlarmState,
+           atmInterfaceDs3PlcpUASs}
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing information
+           about DS3 PLCP layer at an ATM interface."
+       ::= { atmMIBGroups 3 }
+
+atmInterfaceTCGroup    OBJECT-GROUP
+       OBJECTS { atmInterfaceOCDEvents,
+           atmInterfaceTCAlarmState }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing information
+           about TC sublayer at an ATM interface."
+       ::= { atmMIBGroups 4 }
+
+aal5VccGroup    OBJECT-GROUP
+       OBJECTS {atmVccAal5CpcsTransmitSduSize,
+           atmVccAal5CpcsReceiveSduSize,
+           atmVccAal5EncapsType,
+           aal5VccCrcErrors, aal5VccSarTimeOuts,
+           aal5VccOverSizedSDUs }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing
+           AAL5 configuration and performance statistics
+           of a VCC."
+       ::= { atmMIBGroups 9 }
+
+atmInterfaceConfGroup2    OBJECT-GROUP
+       OBJECTS {
+             atmInterfaceMaxVpcs, atmInterfaceMaxVccs,
+             atmInterfaceConfVpcs, atmInterfaceConfVccs,
+             atmInterfaceMaxActiveVpiBits,
+             atmInterfaceMaxActiveVciBits,
+             atmInterfaceIlmiVpi,
+             atmInterfaceIlmiVci,
+             atmInterfaceMyNeighborIpAddress,
+             atmInterfaceMyNeighborIfName,
+             atmInterfaceCurrentMaxVpiBits,
+             atmInterfaceCurrentMaxVciBits,
+             atmInterfaceSubscrAddress }
+       STATUS     current
+       DESCRIPTION
+         "A collection of objects providing configuration
+          information about an ATM interface."
+       ::= { atmMIBGroups 10 }
+
+atmTrafficDescrGroup2    OBJECT-GROUP
+       OBJECTS {
+           atmTrafficDescrType, atmTrafficDescrParam1,
+           atmTrafficDescrParam2, atmTrafficDescrParam3,
+           atmTrafficDescrParam4, atmTrafficDescrParam5,
+           atmTrafficDescrRowStatus, atmServiceCategory,
+           atmTrafficFrameDiscard,
+           atmTrafficDescrParamIndexNext }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing information
+           about ATM traffic descriptor type and
+           the associated parameters."
+       ::= { atmMIBGroups 11 }
+
+atmVpcTerminationGroup2    OBJECT-GROUP
+       OBJECTS  {atmVplOperStatus, atmVplAdminStatus,
+           atmVplLastChange,
+           atmVplReceiveTrafficDescrIndex,
+           atmVplTransmitTrafficDescrIndex,
+           atmVplRowStatus, atmVplCastType,
+           atmVplConnKind }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing information
+           about a VPL at an ATM interface which
+           terminates a VPC (i.e., one which is NOT
+           cross-connected to other VPLs)."
+       ::= { atmMIBGroups 12 }
+
+atmVccTerminationGroup2    OBJECT-GROUP
+       OBJECTS {atmVclOperStatus, atmVclAdminStatus,
+            atmVclLastChange,
+            atmVclReceiveTrafficDescrIndex,
+            atmVclTransmitTrafficDescrIndex,
+            atmVccAalType, atmVclRowStatus,
+            atmVclCastType, atmVclConnKind }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing information
+           about a VCL at an ATM interface
+           which terminates a VCC (i.e., one which is
+           NOT cross-connected to other VCLs)."
+       ::= { atmMIBGroups 13 }
+
+atmVplCrossConnectGroup    OBJECT-GROUP
+       OBJECTS { atmVplReceiveTrafficDescrIndex,
+           atmVplTransmitTrafficDescrIndex,
+           atmVplOperStatus, atmVplLastChange,
+           atmVplRowStatus,
+           atmVplCastType, atmVplConnKind }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing
+           information about the VPLs that
+           are cross-connected together."
+       ::= { atmMIBGroups 14 }
+
+atmVpPvcCrossConnectGroup    OBJECT-GROUP
+       OBJECTS { atmVpCrossConnectAdminStatus,
+           atmVpCrossConnectL2HOperStatus,
+           atmVpCrossConnectH2LOperStatus,
+           atmVpCrossConnectL2HLastChange,
+           atmVpCrossConnectH2LLastChange,
+           atmVpCrossConnectRowStatus,
+           atmVplCrossConnectIdentifier,
+           atmVpCrossConnectIndexNext }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing
+           information about a VP cross-connect
+
+           for PVCs. These objects are not used
+           for Soft PVCs or SVCs."
+       ::= { atmMIBGroups 15 }
+
+atmVclCrossConnectGroup    OBJECT-GROUP
+       OBJECTS { atmVclReceiveTrafficDescrIndex,
+           atmVclTransmitTrafficDescrIndex,
+           atmVclOperStatus, atmVclLastChange,
+           atmVclRowStatus,
+           atmVclCastType, atmVclConnKind }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing
+           information about the VCLs that
+           are cross-connected together."
+       ::= { atmMIBGroups 16 }
+
+atmVcPvcCrossConnectGroup    OBJECT-GROUP
+       OBJECTS { atmVcCrossConnectAdminStatus,
+           atmVcCrossConnectL2HOperStatus,
+           atmVcCrossConnectH2LOperStatus,
+           atmVcCrossConnectL2HLastChange,
+           atmVcCrossConnectH2LLastChange,
+           atmVcCrossConnectRowStatus,
+           atmVclCrossConnectIdentifier,
+           atmVcCrossConnectIndexNext }
+       STATUS     current
+       DESCRIPTION
+          "A collection of objects providing
+           information about a VC cross-connect
+           for PVCs. These objects are not used
+           for Soft PVCs or SVCs."
+       ::= { atmMIBGroups 17 }
+
+-- Deprecated Definitions - Objects
+
+-- atmInterfaceAddressType
+-- atmTrafficQoSClass
+
+-- Deprecated Definitions - Compliance
+
+atmMIBCompliance    MODULE-COMPLIANCE
+     STATUS         deprecated
+     DESCRIPTION
+       "The compliance statement for SNMP entities
+        including networks which have ATM and
+
+        AAL5 interfaces."
+
+     MODULE -- this module
+       MANDATORY-GROUPS  {atmInterfaceConfGroup,
+                          atmTrafficDescrGroup}
+
+       OBJECT         atmInterfaceMaxVpcs
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMaxVccs
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMaxActiveVpiBits
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMaxActiveVciBits
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceIlmiVpi
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceIlmiVci
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMyNeighborIpAddress
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmInterfaceMyNeighborIfName
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam1
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam2
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam3
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam4
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrParam5
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficQoSClass
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmTrafficDescrRowStatus
+       SYNTAX         INTEGER {active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       GROUP          atmInterfaceDs3PlcpGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement the
+          DS3 PLCP layer."
+
+       GROUP          atmInterfaceTCGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement the
+          TC Sublayer."
+
+       GROUP          atmVpcTerminationGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VPLs that terminate VPCs (i.e., ones which
+          are NOT cross-connected to other VPLs)."
+
+       GROUP          atmVpCrossConnectGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VPLs that are not associated with VCLs
+          and are cross-connected to other VPLs."
+
+       OBJECT         atmVplAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplReceiveTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplTransmitTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVplRowStatus
+       SYNTAX         INTEGER {active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS      read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       OBJECT         atmVpCrossConnectAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVpCrossConnectRowStatus
+       SYNTAX         INTEGER {active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       GROUP          atmVccTerminationGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VCLs that terminate VCCs (i.e., ones which
+          are NOT cross-connected to other VCLs)."
+
+       GROUP          atmVcCrossConnectGroup
+       DESCRIPTION
+         "This group is mandatory only for those
+          ATM interfaces which implement ATM
+          VCLs that are cross-connected to
+          other VCLs."
+
+       OBJECT         atmVclAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclReceiveTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclTransmitTrafficDescrIndex
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVccAalType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVclRowStatus
+       SYNTAX         INTEGER {active(1)}
+
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       OBJECT         atmVcCrossConnectAdminStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVcCrossConnectRowStatus
+       SYNTAX         INTEGER { active(1)}
+                        -- subset of RowStatus
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required, and only one
+          of the six enumerated values for the
+          RowStatus textual convention need be
+          supported, specifically: active(1)."
+
+       GROUP          aal5VccGroup
+       DESCRIPTION
+         "This group is mandatory for the
+          AAL5 virtual connections only."
+
+       OBJECT         atmVccAal5CpcsTransmitSduSize
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVccAal5CpcsReceiveSduSize
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+
+       OBJECT         atmVccAal5EncapsType
+       MIN-ACCESS     read-only
+       DESCRIPTION
+         "Write access is not required."
+        ::= { atmMIBCompliances 1 }
+
+-- Deprecated Definitions - Groups
+
+atmInterfaceConfGroup    OBJECT-GROUP
+       OBJECTS {
+             atmInterfaceMaxVpcs, atmInterfaceMaxVccs,
+             atmInterfaceConfVpcs, atmInterfaceConfVccs,
+             atmInterfaceMaxActiveVpiBits,
+             atmInterfaceMaxActiveVciBits,
+             atmInterfaceIlmiVpi,
+             atmInterfaceIlmiVci,
+             atmInterfaceAddressType,
+             atmInterfaceAdminAddress,
+             atmInterfaceMyNeighborIpAddress,
+             atmInterfaceMyNeighborIfName }
+       STATUS     deprecated
+       DESCRIPTION
+         "A collection of objects providing configuration
+          information about an ATM interface."
+       ::= { atmMIBGroups 1 }
+
+atmTrafficDescrGroup    OBJECT-GROUP
+       OBJECTS {
+           atmTrafficDescrType, atmTrafficDescrParam1,
+           atmTrafficDescrParam2, atmTrafficDescrParam3,
+           atmTrafficDescrParam4, atmTrafficDescrParam5,
+           atmTrafficQoSClass, atmTrafficDescrRowStatus}
+       STATUS     deprecated
+       DESCRIPTION
+          "A collection of objects providing information
+           about ATM traffic descriptor type and
+           the associated parameters."
+       ::= { atmMIBGroups 2 }
+
+atmVpcTerminationGroup    OBJECT-GROUP
+       OBJECTS  {atmVplOperStatus, atmVplAdminStatus,
+           atmVplLastChange,
+           atmVplReceiveTrafficDescrIndex,
+           atmVplTransmitTrafficDescrIndex,
+           atmVplRowStatus }
+       STATUS     deprecated
+       DESCRIPTION
+          "A collection of objects providing
+           information about a VPL at an ATM interface
+           which terminates a VPC
+           (i.e., one which is NOT cross-connected
+           to other VPLs)."
+       ::= { atmMIBGroups 5 }
+
+atmVccTerminationGroup    OBJECT-GROUP
+       OBJECTS {atmVclOperStatus, atmVclAdminStatus,
+           atmVclLastChange,
+            atmVclReceiveTrafficDescrIndex,
+            atmVclTransmitTrafficDescrIndex,
+            atmVccAalType, atmVclRowStatus }
+       STATUS     deprecated
+       DESCRIPTION
+          "A collection of objects providing information
+           about a VCL at an ATM interface
+           which terminates a VCC (i.e., one which is
+           NOT cross-connected to other VCLs)."
+       ::= { atmMIBGroups 6 }
+
+atmVpCrossConnectGroup    OBJECT-GROUP
+       OBJECTS { atmVplReceiveTrafficDescrIndex,
+           atmVplTransmitTrafficDescrIndex,
+           atmVplOperStatus, atmVplRowStatus,
+           atmVpCrossConnectAdminStatus,
+           atmVpCrossConnectL2HOperStatus,
+           atmVpCrossConnectH2LOperStatus,
+           atmVpCrossConnectL2HLastChange,
+           atmVpCrossConnectH2LLastChange,
+           atmVpCrossConnectRowStatus,
+           atmVplCrossConnectIdentifier,
+           atmVpCrossConnectIndexNext }
+       STATUS     deprecated
+       DESCRIPTION
+          "A collection of objects providing
+           information about a VP cross-connect
+           and the associated VPLs that are
+           cross-connected together."
+       ::= { atmMIBGroups 7 }
+
+atmVcCrossConnectGroup    OBJECT-GROUP
+       OBJECTS { atmVclReceiveTrafficDescrIndex,
+           atmVclTransmitTrafficDescrIndex,
+           atmVclOperStatus, atmVclRowStatus,
+           atmVcCrossConnectAdminStatus,
+           atmVcCrossConnectL2HOperStatus,
+           atmVcCrossConnectH2LOperStatus,
+           atmVcCrossConnectL2HLastChange,
+           atmVcCrossConnectH2LLastChange,
+           atmVcCrossConnectRowStatus,
+           atmVclCrossConnectIdentifier,
+           atmVcCrossConnectIndexNext }
+       STATUS     deprecated
+       DESCRIPTION
+          "A collection of objects providing
+           information about a VC cross-connect
+
+           and the associated VCLs that are
+           cross-connected together."
+       ::= { atmMIBGroups 8 }
+
+-- {atmMIB 3} has been used by [19].
+
+END
diff --git a/snmp_builder/mibs/ATM-TC-MIB.mib b/snmp_builder/mibs/ATM-TC-MIB.mib
new file mode 100644
index 0000000..07abd64
--- /dev/null
+++ b/snmp_builder/mibs/ATM-TC-MIB.mib
@@ -0,0 +1,713 @@
+     ATM-TC-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+        MODULE-IDENTITY, OBJECT-IDENTITY,
+        TimeTicks, mib-2
+            FROM SNMPv2-SMI
+        TEXTUAL-CONVENTION
+            FROM SNMPv2-TC;
+
+     atmTCMIB MODULE-IDENTITY
+          LAST-UPDATED "9810190200Z"
+          ORGANIZATION "IETF AToMMIB Working Group"
+          CONTACT-INFO
+            "          Michael Noto
+              Postal:  3Com Corporation
+                       5400 Bayfront Plaza, M/S 3109
+                       Santa Clara, CA 95052
+                       USA
+              Tel:     +1 408 326 2218
+              E-mail:  mike_noto@3com.com
+
+                       Ethan Mickey Spiegel
+
+              Postal:  Cisco Systems
+                       170 W. Tasman Dr.
+                       San Jose, CA 95134
+                       USA
+              Tel:     +1 408 526 6408
+              E-mail:  mspiegel@cisco.com
+
+                       Kaj Tesink
+              Postal:  Bellcore
+                       331 Newman Springs Road
+                       Red Bank, NJ 07701
+                       USA
+              Tel:     +1 732 758 5254
+              Fax:     +1 732 758 4177
+              E-mail:  kaj@bellcore.com"
+          DESCRIPTION
+           "This MIB Module provides Textual Conventions
+           and OBJECT-IDENTITY Objects to be used by
+           ATM systems."
+          ::= { mib-2 37 3 } -- atmMIB 3 (see [3])
+
+     -- The Textual Conventions defined below are organized
+     -- alphabetically
+
+     AtmAddr ::= TEXTUAL-CONVENTION
+             DISPLAY-HINT "1x"
+             STATUS  current
+             DESCRIPTION
+                 "An ATM address. The semantics are implied by
+                 the length. The address types are: - no
+                 address (0 octets) - E.164 (8 octets) - NSAP
+                 (20 octets) In addition, when subaddresses
+                 are used the AtmAddr may represent the
+                 concatenation of address and subaddress. The
+                 associated address types are: - E.164, E.164
+                 (16 octets) - E.164, NSAP (28 octets) - NSAP,
+                 NSAP (40 octets) Address lengths other than
+                 defined in this definition imply address
+                 types defined elsewhere.  Note: The E.164
+                 address is encoded in BCD format."
+            SYNTAX   OCTET STRING (SIZE(0..40))
+
+    AtmConnCastType ::= TEXTUAL-CONVENTION
+            STATUS  current
+            DESCRIPTION
+              "The type of topology of a connection (point-
+
+              to-point, point-to-multipoint). In the case
+              of point-to-multipoint, the orientation of
+              this VPL or VCL in the connection.
+              On a host:
+              - p2mpRoot indicates that the host
+                is the root of the p2mp connection.
+              - p2mpLeaf indicates that the host
+                is a leaf of the p2mp connection.
+              On a switch interface:
+              - p2mpRoot indicates that cells received
+                by the switching fabric from the interface
+                are from the root of the p2mp connection.
+              - p2mpLeaf indicates that cells transmitted
+                to the interface from the switching fabric
+                are to the leaf of the p2mp connection."
+            SYNTAX   INTEGER {
+               p2p(1),
+               p2mpRoot(2),
+               p2mpLeaf(3)
+               }
+
+    AtmConnKind ::= TEXTUAL-CONVENTION
+            STATUS  current
+            DESCRIPTION
+                "The type of call control used for an ATM
+                connection at a particular interface. The use
+                is as follows:
+                   pvc(1)
+                      Virtual link of a PVC. Should not be
+                      used for an PVC/SVC (i.e., Soft PVC)
+                      crossconnect.
+                   svcIncoming(2)
+                      Virtual link established after a
+                      received signaling request to setup
+                      an SVC.
+                   svcOutgoing(3)
+                      Virtual link established after a
+                      transmitted or forwarded signaling
+                      request to setup an SVC.
+                   spvcInitiator(4)
+                      Virtual link at the PVC side of an
+                      SVC/PVC crossconnect, where the
+                      switch is the initiator of the Soft PVC
+                      setup.
+                   spvcTarget(5)
+                      Virtual link at the PVC side of an
+                      SVC/PVC crossconnect, where the
+                      switch is the target of the Soft PVC
+
+                      setup.
+
+                For PVCs, a pvc virtual link is always cross-
+                connected to a pvc virtual link.
+
+                For SVCs, an svcIncoming virtual link is always cross-
+                connected to an svcOutgoing virtual link.
+
+For Soft PVCs, an spvcInitiator is either cross-connected to
+an svcOutgoing or an spvcTarget, and an spvcTarget is either
+cross-connected to an svcIncoming or an spvcInitiator."
+        SYNTAX   INTEGER {
+           pvc(1),
+           svcIncoming(2),
+           svcOutgoing(3),
+           spvcInitiator(4),
+           spvcTarget(5)
+           }
+
+    AtmIlmiNetworkPrefix ::= TEXTUAL-CONVENTION
+        STATUS   current
+        DESCRIPTION
+            "A network prefix used for ILMI address
+            registration.  In the case of ATM endsystem
+            addresses (AESAs), the network prefix is the first
+            13 octets of the address which includes the AFI,
+            IDI, and HO-DSP fields.  In the case of native
+            E.164 addresses, the network prefix is the entire
+            E.164 address encoded in 8 octets, as if it were
+            an E.164 IDP in an ATM endsystem address
+            structure."
+        REFERENCE
+            "ATM Forum, Integrated Local Management Interface
+               (ILMI) Specification, Version 4.0,
+               af-ilmi-0065.000, September 1996, Section 9
+             ATM Forum, ATM User-Network Interface Signalling
+               Specification, Version 4.0 (UNI 4.0),
+               af-sig-0061.000, June 1996, Section 3"
+        SYNTAX   OCTET STRING (SIZE(8|13))
+
+AtmInterfaceType ::= TEXTUAL-CONVENTION
+        STATUS       current
+        DESCRIPTION
+            "The connection setup procedures used for the
+            identified interface.
+
+            Other: Connection setup procedures other than
+               those listed below.
+
+            Auto-configuration:
+               Indicates that the connection setup
+               procedures are to be determined dynamically,
+               or that determination has not yet been
+               completed. One such mechanism is via ATM
+               Forum ILMI auto-configuration procedures.
+
+            ITU-T DSS2:
+            -  ITU-T Recommendation Q.2931, Broadband
+               Integrated Service Digital Network (B-ISDN)
+               Digital Subscriber Signalling System No.2
+               (DSS2) User-Network Interface (UNI) Layer 3
+               Specification for Basic Call/Connection
+               Control (September 1994)
+            -  ITU-T Draft Recommendation Q.2961,
+               B-ISDN DSS 2 Support of Additional Traffic
+               Parameters (May 1995)
+
+            -  ITU-T Draft Recommendation Q.2971,
+               B-ISDN DSS 2 User Network Interface Layer 3
+               Specification for Point-to-multipoint
+               Call/connection Control (May 1995)
+
+            ATM Forum UNI 3.0:
+               ATM Forum, ATM User-Network Interface,
+               Version 3.0 (UNI 3.0) Specification,
+               (1994).
+
+            ATM Forum UNI 3.1:
+               ATM Forum, ATM User-Network Interface,
+               Version 3.1 (UNI 3.1) Specification,
+               (November 1994).
+
+            ATM Forum UNI Signalling 4.0:
+               ATM Forum, ATM User-Network Interface (UNI)
+               Signalling Specification Version 4.0,
+               af-sig-0061.000 (June 1996).
+
+            ATM Forum IISP (based on UNI 3.0 or UNI 3.1) :
+               Interim Inter-switch Signaling Protocol
+               (IISP) Specification, Version 1.0,
+               af-pnni-0026.000, (December 1994).
+
+            ATM Forum PNNI 1.0 :
+               ATM Forum, Private Network-Network Interface
+               Specification, Version 1.0, af-pnni-0055.000,
+               (March 1996).
+
+            ATM Forum B-ICI:
+               ATM Forum, B-ICI Specification, Version 2.0,
+               af-bici-0013.002, (November 1995).
+
+            ATM Forum UNI PVC Only:
+               An ATM Forum compliant UNI with the
+               signalling disabled.
+            ATM Forum NNI PVC Only:
+               An ATM Forum compliant NNI with the
+               signalling disabled."
+        SYNTAX  INTEGER  {
+                  other(1),
+                  autoConfig(2),
+                  ituDss2(3),
+                  atmfUni3Dot0(4),
+                  atmfUni3Dot1(5),
+                  atmfUni4Dot0(6),
+                  atmfIispUni3Dot0(7),
+                  atmfIispUni3Dot1(8),
+                  atmfIispUni4Dot0(9),
+        atmfPnni1Dot0(10),
+        atmfBici2Dot0(11),
+        atmfUniPvcOnly(12),
+        atmfNniPvcOnly(13)  }
+
+AtmServiceCategory ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The service category for a connection."
+        REFERENCE
+            "ATM Forum Traffic Management Specification,
+            Version 4.0, af-tm-0056.000, June 1996."
+        SYNTAX   INTEGER {
+           other(1),   -- none of the following
+           cbr(2),     -- constant bit rate
+           rtVbr(3),   -- real-time variable bit rate
+           nrtVbr(4),  -- non real-time variable bit rate
+           abr(5),     -- available bit rate
+           ubr(6)      -- unspecified bit rate
+           }
+
+AtmSigDescrParamIndex ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value of this object identifies a row in the
+            atmSigDescrParamTable. The value 0 signifies that
+            none of the signalling parameters defined in the
+            atmSigDescrParamTable are applicable."
+        SYNTAX  INTEGER (0..2147483647)
+
+AtmTrafficDescrParamIndex ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value of this object identifies a row in the
+            atmTrafficDescrParamTable.  The value 0 signifies
+            that no row has been identified."
+        SYNTAX  INTEGER (0..2147483647)
+
+AtmVcIdentifier ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The VCI value for a VCL. The maximum VCI value
+            cannot exceed the value allowable by
+            atmInterfaceMaxVciBits defined in ATM-MIB."
+        SYNTAX   INTEGER (0..65535)
+
+AtmVpIdentifier ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The VPI value for a VPL or VCL. The value VPI=0
+            is only allowed for a VCL. For ATM UNIs supporting
+            VPCs the VPI value ranges from 0 to 255.  The VPI
+            value 0 is supported for ATM UNIs conforming to
+            the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs)
+            specification. For ATM UNIs supporting VCCs the
+            VPI value ranges from 0 to 255.  For ATM NNIs the
+            VPI value ranges from 0 to 4095.  The maximum VPI
+            value cannot exceed the value allowable by
+            atmInterfaceMaxVpiBits defined in ATM-MIB."
+        SYNTAX    INTEGER (0..4095)
+
+AtmVorXAdminStatus ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value determines the desired administrative
+            status of a virtual link or cross-connect. The up
+            and down states indicate that the traffic flow is
+            enabled or disabled respectively on the virtual
+            link or cross-connect."
+        SYNTAX   INTEGER {
+           up(1),
+           down(2)
+            }
+
+AtmVorXLastChange ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value of MIB II's sysUpTime at the time a
+            virtual link or cross-connect entered its current
+            operational state. If the current state was
+            entered prior to the last re-initialization of the
+            agent then this object contains a zero value."
+        SYNTAX   TimeTicks
+
+AtmVorXOperStatus ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The value determines the operational status of a
+            virtual link or cross-connect. The up and down
+            states indicate that the traffic flow is enabled
+            or disabled respectively on the virtual link or
+            cross-connect. The unknown state indicates that
+            the state of it cannot be determined. The state
+            will be down or unknown if the supporting ATM
+            interface(s) is down or unknown respectively."
+        SYNTAX   INTEGER {
+           up(1),
+           down(2),
+           unknown(3)
+           }
+
+-- OBJECT-IDENTITIES:
+
+-- The following atmTrafficDescriptorTypes has been moved
+-- from RFC1695 and no longer appear in the revision of
+-- RFC1695[3].
+
+atmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {mib-2 37 1 1}
+                                            -- atmMIBObjects
+                                            -- See [3].
+
+-- All other and new OBJECT IDENTITIES
+-- are defined under the following subtree:
+
+    atmObjectIdentities OBJECT IDENTIFIER ::= {atmTCMIB 1}
+
+-- The following values are defined for use as
+-- possible values of the ATM traffic descriptor type.
+
+atmNoTrafficDescriptor  OBJECT-IDENTITY
+    STATUS  deprecated
+    DESCRIPTION
+        "This identifies the no ATM traffic
+        descriptor type.  Parameters 1, 2, 3, 4,
+        and 5 are not used.  This traffic descriptor
+        type can be used for best effort traffic."
+    ::= {atmTrafficDescriptorTypes 1}
+
+atmNoClpNoScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        and no Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: not used
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 2}
+
+atmClpNoTaggingNoScr  OBJECT-IDENTITY
+    STATUS  deprecated
+    DESCRIPTION
+        "This traffic descriptor is for CLP without
+        tagging and no Sustained Cell Rate.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: peak cell rate in cells/second
+                     for CLP=0 traffic
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used."
+    ::= {atmTrafficDescriptorTypes 3}
+
+atmClpTaggingNoScr  OBJECT-IDENTITY
+    STATUS  deprecated
+    DESCRIPTION
+        "This traffic descriptor is for CLP with
+        tagging and no Sustained Cell Rate.  The use
+        of the parameter vector for this type:
+
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: peak cell rate in cells/second
+                     for CLP=0 traffic, excess
+                     tagged as CLP=1
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used."
+    ::= {atmTrafficDescriptorTypes 4}
+
+atmNoClpScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        with Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 5}
+
+atmClpNoTaggingScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        Sustained Cell Rate and no tagging.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 6}
+
+atmClpTaggingScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        tagging and Sustained Cell Rate.  The use of
+        the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic, excess tagged as
+                     CLP=1
+        Parameter 3: maximum burst size in cells
+        Parameter 4: not used
+        Parameter 5: not used."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 7}
+
+atmClpNoTaggingMcr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        Minimum Cell Rate and no tagging.  The use of
+        the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: minimum cell rate in cells/second
+        Parameter 4: unused
+        Parameter 5: unused."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994."
+    ::= {atmTrafficDescriptorTypes 8}
+
+atmClpTransparentNoScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for the CLP-
+        transparent model and no Sustained Cell Rate.
+        The use of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the CBR.1 conformance
+        definition.
+
+        Connections specifying this traffic descriptor
+        type will be rejected at UNI 3.0 or UNI 3.1
+        interfaces.  For a similar traffic descriptor
+        type that can be accepted at UNI 3.0 and
+        UNI 3.1 interfaces, see atmNoClpNoScr."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 9}
+
+atmClpTransparentScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for the CLP-
+        transparent model with Sustained Cell Rate.
+        The use of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the VBR.1 conformance
+        definition.
+
+        Connections specifying this traffic descriptor
+        type will be rejected at UNI 3.0 or UNI 3.1
+        interfaces.  For a similar traffic descriptor
+        type that can be accepted at UNI 3.0 and
+        UNI 3.1 interfaces, see atmNoClpScr."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 10}
+
+atmNoClpTaggingNoScr  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        with tagging and no Sustained Cell Rate.  The
+        use of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the UBR.2 conformance
+        definition ."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 11}
+
+atmNoClpNoScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        and no Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+
+                     for CLP=0+1 traffic
+        Parameter 2: CDVT in tenths of microseconds
+        Parameter 3: not used
+        Parameter 4: not used
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        CBR connections following the UNI 3.0/3.1
+        conformance definition for PCR CLP=0+1.
+        These CBR connections differ from CBR.1
+        connections in that the CLR objective
+        applies only to the CLP=0 cell flow.
+
+        This traffic descriptor type is also
+        applicable to connections following the UBR.1
+        conformance definition."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 12}
+
+atmNoClpScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for no CLP
+        with Sustained Cell Rate.  The use of the
+        parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable
+        to VBR connections following the UNI 3.0/3.1
+        conformance definition for PCR CLP=0+1 and
+        SCR CLP=0+1.  These VBR connections
+        differ from VBR.1 connections in that
+        the CLR objective applies only to the CLP=0
+        cell flow."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 13}
+
+atmClpNoTaggingScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        Sustained Cell Rate and no tagging.  The use
+        of the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic
+        Parameter 3: maximum burst size in cells
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the VBR.2 conformance
+        definition."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 14}
+
+atmClpTaggingScrCdvt  OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "This traffic descriptor type is for CLP with
+        tagging and Sustained Cell Rate.  The use of
+        the parameter vector for this type:
+        Parameter 1: peak cell rate in cells/second
+                     for CLP=0+1 traffic
+        Parameter 2: sustainable cell rate in cells/second
+                     for CLP=0 traffic, excess tagged as
+                     CLP=1
+        Parameter 3: maximum burst size in cells
+
+        Parameter 4: CDVT in tenths of microseconds
+        Parameter 5: not used.
+
+        This traffic descriptor type is applicable to
+        connections following the VBR.3 conformance
+        definition."
+    REFERENCE
+        "ATM Forum,ATM User-Network Interface,
+           Version 3.0 (UNI 3.0) Specification, 1994.
+         ATM Forum, ATM User-Network Interface,
+           Version 3.1 (UNI 3.1) Specification,
+           November 1994.
+         ATM Forum, Traffic Management Specification,
+           Version 4.0, af-tm-0056.000, June 1996."
+    ::= {atmTrafficDescriptorTypes 15}
+
+END
diff --git a/snmp_builder/mibs/ATM2-MIB.mib b/snmp_builder/mibs/ATM2-MIB.mib
new file mode 100644
index 0000000..01f1c1b
--- /dev/null
+++ b/snmp_builder/mibs/ATM2-MIB.mib
@@ -0,0 +1,3220 @@
+ATM2-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+       Gauge32, Counter32, Integer32
+           FROM SNMPv2-SMI
+       TruthValue, RowStatus, TimeStamp
+           FROM SNMPv2-TC
+       MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+           FROM SNMPv2-CONF
+       SnmpAdminString
+           FROM SNMP-FRAMEWORK-MIB
+       InterfaceIndex, InterfaceIndexOrZero, ifIndex
+           FROM IF-MIB
+       atmMIBObjects, atmInterfaceConfEntry,
+       atmVplEntry, atmVplVpi,
+       atmVclEntry, atmVclVpi, atmVclVci,
+       atmVpCrossConnectEntry, atmVcCrossConnectEntry
+           FROM ATM-MIB
+       AtmAddr, AtmSigDescrParamIndex,
+       AtmInterfaceType, AtmIlmiNetworkPrefix,
+       AtmVcIdentifier, AtmVpIdentifier,
+       AtmTrafficDescrParamIndex
+           FROM ATM-TC-MIB;
+
+   atm2MIB MODULE-IDENTITY
+       LAST-UPDATED "200309230000Z"
+       ORGANIZATION "IETF AToMMIB Working Group"
+       CONTACT-INFO
+         "AToMMIB WG
+             http://www.ietf.org/html.charters/atommib-charter.html
+           Editors:
+                    Faye Ly
+           Postal:  Pedestal Networks
+                    6503 Dumbarton Circle
+                    Fremont, CA 94555
+                    USA
+           Tel:     +1 510 896 2908
+           E-Mail:  faye@pedestalnetworks.com
+
+                    Michael Noto
+           Postal:  Cisco Systems
+                    170 W. Tasman Drive
+                    San Jose, CA 95134-1706
+                    USA
+
+           E-mail:  mnoto@cisco.com
+
+                    Andrew Smith
+           Postal:  Consultant
+
+           E-Mail:  ah_smith@acm.org
+
+                    Ethan Mickey Spiegel
+           Postal:  Cisco Systems
+                    170 W. Tasman Drive
+                    San Jose, CA 95134-1706
+                    USA
+           Tel:     +1 408 526 6408
+           Fax:     +1 408 526 6488
+           E-Mail:  mspiegel@cisco.com
+
+                    Kaj Tesink
+           Postal:  Telcordia Technologies
+                    331 Newman Springs Road
+
+                    Red Bank, NJ 07701
+                    USA
+           Tel:     +1 732 758 5254
+           E-mail:  kaj@research.telcordia.com"
+       DESCRIPTION
+         "Copyright (C) The Internet Society (2003). This version of
+         this MIB module is part of RFC 3606; see the RFC itself for
+         full legal notices.
+
+         This MIB Module is a supplement to the ATM-MIB
+         defined in RFC 2515."
+       REVISION "200309230000Z"
+       DESCRIPTION
+         "Initial version of this MIB, published as RFC 3606."
+         ::= { atmMIBObjects 14 }
+
+   atm2MIBObjects  OBJECT IDENTIFIER ::= {atm2MIB 1}
+
+   atm2MIBTraps OBJECT IDENTIFIER ::= {atm2MIB 2}
+
+   -- This ATM2-MIB Module consists of the following tables,
+   -- plus ATM trap support:
+   --      1. atmSvcVpCrossConnectTable
+   --      2. atmSvcVcCrossConnectTable
+   --      3. atmSigStatTable
+   --      4. atmSigSupportTable
+   --      5. atmSigDescrParamTable
+   --      6. atmIfRegisteredAddrTable
+   --      7. atmVclAddrTable
+   --      8. atmAddrVclTable
+   --      9. atmVplStatTable
+   --      10. atmVplLogicalPortTable
+   --      11. atmVclStatTable
+   --      12. atmAal5VclStatTable
+   --      13. atmVclGenTable
+   --      14. atmInterfaceExtTable
+   --      15. atmIlmiSrvcRegTable
+   --      16. atmIlmiNetworkPrefixTable
+   --      17. atmSwitchAddressTable
+   --      18. atmVpCrossConnectXTable
+   --      19. atmVcCrossConnectXTable
+   --      20. atmCurrentlyFailingPVplTable
+   --      21. atmCurrentlyFailingPVclTable
+
+   -- 1. ATM VPL SVC Cross-Connect Table
+
+   atmSvcVpCrossConnectTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF
+                    AtmSvcVpCrossConnectEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+         "The ATM SVPC Cross-Connect table.  A
+         bi-directional VP cross-connect between two
+         switched VPLs is modeled as one entry in this
+         table.  A Soft PVPC cross-connect, between a
+         soft permanent VPL and a switched VPL, is
+         also modeled as one entry in this table."
+       ::= { atm2MIBObjects 1 }
+
+   atmSvcVpCrossConnectEntry OBJECT-TYPE
+       SYNTAX       AtmSvcVpCrossConnectEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+         "An entry in the ATM SVPC Cross-Connect table.
+         This entry is used to model a bi-directional
+         ATM VP cross-connect between two VPLs."
+       INDEX { atmSvcVpCrossConnectIndex,
+               atmSvcVpCrossConnectLowIfIndex,
+               atmSvcVpCrossConnectLowVpi,
+               atmSvcVpCrossConnectHighIfIndex,
+               atmSvcVpCrossConnectHighVpi }
+       ::= { atmSvcVpCrossConnectTable 1 }
+
+   AtmSvcVpCrossConnectEntry ::= SEQUENCE {
+       atmSvcVpCrossConnectIndex           INTEGER,
+       atmSvcVpCrossConnectLowIfIndex      InterfaceIndex,
+       atmSvcVpCrossConnectLowVpi          AtmVpIdentifier,
+       atmSvcVpCrossConnectHighIfIndex     InterfaceIndex,
+       atmSvcVpCrossConnectHighVpi         AtmVpIdentifier,
+       atmSvcVpCrossConnectCreationTime    TimeStamp,
+       atmSvcVpCrossConnectRowStatus       RowStatus
+                     }
+
+   atmSvcVpCrossConnectIndex OBJECT-TYPE
+       SYNTAX       INTEGER (1..2147483647)
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+         "A unique value to identify this SVPC
+         cross-connect.  For each VP associated
+         with this cross-connect, the agent reports
+         this cross-connect index value in the
+         atmVplCrossConnectIdentifer attribute of the
+
+         corresponding atmVplTable entries."
+       ::= { atmSvcVpCrossConnectEntry 1 }
+
+   atmSvcVpCrossConnectLowIfIndex OBJECT-TYPE
+       SYNTAX       InterfaceIndex
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+         "The value of this object is equal to the
+         ifIndex value of the ATM interface port for this
+         SVPC cross-connect.  The term low implies
+         that this ATM interface has the numerically lower
+         ifIndex value than the other ATM interface
+         identified in the same atmSvcVpCrossConnectEntry."
+       ::= { atmSvcVpCrossConnectEntry 2 }
+
+   atmSvcVpCrossConnectLowVpi OBJECT-TYPE
+       SYNTAX       AtmVpIdentifier
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+         "The value of this object is equal to the VPI
+         value associated with the SVPC cross-connect
+         at the ATM interface that is identified by
+         atmSvcVpCrossConnectLowIfIndex.  The VPI value
+         cannot exceed the number supported by the
+         atmInterfaceCurrentMaxSvpcVpi at the low ATM interface
+         port."
+       ::= { atmSvcVpCrossConnectEntry 3 }
+
+   atmSvcVpCrossConnectHighIfIndex OBJECT-TYPE
+       SYNTAX       InterfaceIndex
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the
+         ifIndex value of the ATM interface port for
+         this SVC VP cross-connect.  The term high
+         implies that this ATM interface has the
+         numerically higher ifIndex value than the
+         other ATM interface identified in the same
+         atmSvcVpCrossConnectEntry."
+       ::= { atmSvcVpCrossConnectEntry 4 }
+
+   atmSvcVpCrossConnectHighVpi OBJECT-TYPE
+       SYNTAX       AtmVpIdentifier
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the VPI
+         value associated with the SVPC cross-connect
+         at the ATM interface that is identified by
+         atmSvcVpCrossConnectHighIfIndex.  The VPI value
+         cannot exceed the number supported by the
+         atmInterfaceCurrentMaxSvpcVpi at the high ATM interface
+         port."
+       ::= { atmSvcVpCrossConnectEntry 5 }
+
+   atmSvcVpCrossConnectCreationTime OBJECT-TYPE
+       SYNTAX       TimeStamp
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+        "The value of the sysUpTime object
+         at the time this bi-directional SVPC
+         cross-connect was created.  If the current
+         state was entered prior to the last
+         re-initialization of the agent, then this
+         object contains a zero value."
+       ::= { atmSvcVpCrossConnectEntry 6 }
+
+   atmSvcVpCrossConnectRowStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object is used to delete rows in the
+            atmSvcVpCrossConnectTable."
+       ::= { atmSvcVpCrossConnectEntry 7 }
+
+   -- 2. ATM VCL SVC Cross-Connect Table
+
+   atmSvcVcCrossConnectTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF AtmSvcVcCrossConnectEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The ATM SVCC Cross-Connect table.  A
+         bi-directional VC cross-connect between two
+         switched VCLs is modeled as one entry in
+         this table.  A Soft PVCC cross-connect,
+         between a soft permanent VCL and a switched
+         VCL, is also modeled as one entry in this
+         table."
+       ::= { atm2MIBObjects 2 }
+
+   atmSvcVcCrossConnectEntry OBJECT-TYPE
+       SYNTAX       AtmSvcVcCrossConnectEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "An entry in the ATM SVCC Cross-Connect table.
+         This entry is used to model a bi-directional ATM
+         VC cross-connect between two VCLs."
+       INDEX { atmSvcVcCrossConnectIndex,
+               atmSvcVcCrossConnectLowIfIndex,
+               atmSvcVcCrossConnectLowVpi,
+               atmSvcVcCrossConnectLowVci,
+               atmSvcVcCrossConnectHighIfIndex,
+               atmSvcVcCrossConnectHighVpi,
+               atmSvcVcCrossConnectHighVci }
+       ::= { atmSvcVcCrossConnectTable 1 }
+
+   AtmSvcVcCrossConnectEntry ::= SEQUENCE {
+       atmSvcVcCrossConnectIndex           INTEGER,
+       atmSvcVcCrossConnectLowIfIndex      InterfaceIndex,
+       atmSvcVcCrossConnectLowVpi          AtmVpIdentifier,
+       atmSvcVcCrossConnectLowVci          AtmVcIdentifier,
+       atmSvcVcCrossConnectHighIfIndex     InterfaceIndex,
+       atmSvcVcCrossConnectHighVpi         AtmVpIdentifier,
+       atmSvcVcCrossConnectHighVci         AtmVcIdentifier,
+       atmSvcVcCrossConnectCreationTime    TimeStamp,
+       atmSvcVcCrossConnectRowStatus       RowStatus
+               }
+
+   atmSvcVcCrossConnectIndex OBJECT-TYPE
+       SYNTAX       INTEGER (1..2147483647)
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "A unique value to identify this SVCC cross-connect.
+         For each VP associated with this cross-connect, the
+         agent reports this cross-connect index value in the
+         atmVclCrossConnectIdentifier attribute of the
+         corresponding atmVplTable entries."
+       ::= { atmSvcVcCrossConnectEntry 1 }
+
+   atmSvcVcCrossConnectLowIfIndex OBJECT-TYPE
+       SYNTAX       InterfaceIndex
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the
+         ifIndex value of the ATM interface port for this
+
+         SVCC cross-connect.  The term low implies that
+         this ATM interface has the numerically lower
+         ifIndex value than the other ATM interface
+         identified in the same atmSvcVcCrossConnectEntry."
+       ::= { atmSvcVcCrossConnectEntry 2 }
+
+   atmSvcVcCrossConnectLowVpi OBJECT-TYPE
+       SYNTAX       AtmVpIdentifier
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the VPI
+         value associated with the SVCC cross-connect
+         at the ATM interface that is identified by
+         atmSvcVcCrossConnectLowIfIndex.  The VPI value
+         cannot exceed the number supported by the
+         atmInterfaceCurrentMaxSvccVpi at the low ATM interface
+         port."
+       ::= { atmSvcVcCrossConnectEntry 3 }
+
+   atmSvcVcCrossConnectLowVci OBJECT-TYPE
+       SYNTAX       AtmVcIdentifier
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the VCI
+         value associated with the SVCC cross-connect
+         at the ATM interface that is identified by
+         atmSvcVcCrossConnectLowIfIndex.  The VCI value
+         cannot exceed the number supported by the
+         atmInterfaceCurrentMaxSvccVci at the low ATM interface
+         port."
+       ::= { atmSvcVcCrossConnectEntry 4 }
+
+   atmSvcVcCrossConnectHighIfIndex OBJECT-TYPE
+       SYNTAX       InterfaceIndex
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the
+         ifIndex value for the ATM interface port for
+         this SVCC cross-connect.  The term high implies
+         that this ATM interface has the numerically
+         higher ifIndex value than the other ATM interface
+         identified in the same atmSvcVcCrossConnectEntry."
+       ::= { atmSvcVcCrossConnectEntry 5 }
+
+   atmSvcVcCrossConnectHighVpi OBJECT-TYPE
+       SYNTAX       AtmVpIdentifier
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the VPI
+         value associated with the SVCC cross-connect
+         at the ATM interface that is identified by
+         atmSvcVcCrossConnectHighIfIndex.  The VPI value
+         cannot exceed the number supported by the
+         atmInterfaceCurrentMaxSvccVpi at the high ATM interface
+         port."
+       ::= { atmSvcVcCrossConnectEntry 6 }
+
+   atmSvcVcCrossConnectHighVci OBJECT-TYPE
+       SYNTAX       AtmVcIdentifier
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "The value of this object is equal to the VCI
+         value associated with the SVCC cross-connect
+         at the ATM interface that is identified by
+         atmSvcVcCrossConnectHighIfIndex.  The VCI value
+         cannot exceed the number supported by the
+         atmInterfaceMaxVciBits at the high ATM interface
+         port."
+       ::= { atmSvcVcCrossConnectEntry 7 }
+
+   atmSvcVcCrossConnectCreationTime OBJECT-TYPE
+       SYNTAX       TimeStamp
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+        "The value of the sysUpTime object
+         at the time this bi-directional SVCC
+         cross-connect was created.  If the current
+         state was entered prior to the last
+         re-initialization of the agent, then this
+         object contains a zero value."
+       ::= { atmSvcVcCrossConnectEntry 8 }
+
+   atmSvcVcCrossConnectRowStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object is used to delete rows in the
+            atmSvcVcCrossConnectTable."
+       ::= { atmSvcVcCrossConnectEntry 9 }
+
+   -- 3. ATM Interface Signalling Statistics Table --
+
+   atmSigStatTable       OBJECT-TYPE
+       SYNTAX       SEQUENCE OF AtmSigStatEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "This table contains ATM interface signalling
+        statistics, one entry per ATM signalling
+        interface."
+       ::= { atm2MIBObjects 3 }
+
+   atmSigStatEntry         OBJECT-TYPE
+       SYNTAX       AtmSigStatEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+        "This list contains signalling statistics variables."
+       INDEX { ifIndex }
+       ::= { atmSigStatTable  1}
+
+   AtmSigStatEntry    ::= SEQUENCE  {
+       atmSigSSCOPConEvents            Counter32,
+       atmSigSSCOPErrdPdus             Counter32,
+       atmSigDetectSetupAttempts       Counter32,
+       atmSigEmitSetupAttempts         Counter32,
+       atmSigDetectUnavailRoutes       Counter32,
+       atmSigEmitUnavailRoutes         Counter32,
+       atmSigDetectUnavailResrcs       Counter32,
+       atmSigEmitUnavailResrcs         Counter32,
+       atmSigDetectCldPtyEvents        Counter32,
+       atmSigEmitCldPtyEvents          Counter32,
+       atmSigDetectMsgErrors           Counter32,
+       atmSigEmitMsgErrors             Counter32,
+       atmSigDetectClgPtyEvents        Counter32,
+       atmSigEmitClgPtyEvents          Counter32,
+       atmSigDetectTimerExpireds       Counter32,
+       atmSigEmitTimerExpireds         Counter32,
+       atmSigDetectRestarts            Counter32,
+       atmSigEmitRestarts              Counter32,
+       atmSigInEstabls                 Counter32,
+       atmSigOutEstabls                Counter32
+            }
+
+   atmSigSSCOPConEvents   OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "SSCOP Connection Events Counter.  This counter counts
+            the sum of the following errors:
+
+            1) SSCOP Connection Disconnect Counter
+
+                The abnormal occurrence of this event is
+                characterized by the expiry of Timer_NO_RESPONSE.
+                (This event is communicated to the layer management
+                with MAA-ERROR code P.  See ITU-T Q.2110.)
+
+             2) SSCOP Connection Initiation Failure
+
+                This condition indicates the inability to establish
+                an SSCOP connection.  This event occurs whenever the
+                number of expiries of the connection control timer
+                (Timer_CC) equals or exceeds the MaxCC, or upon
+                receipt of a connection reject message BGREJ PDU.
+                (This event is communicated to layer management with
+                MAA-ERROR code O.  See ITU-T Q.2110.)
+
+             3) SSCOP Connection Re-Establ/Resynch
+
+                This event occurs upon receipt of a BGN PDU or
+                RS PDU."
+       REFERENCE
+           "ITU-T Recommendation Q.2110, Broadband
+            Integrated Services Digital Network
+            (B-ISDN) - ATM Adaptation Layer - Service
+            Specific Connection Oriented Protocol (SSCOP)
+            Specification, July 1994."
+       ::= { atmSigStatEntry 1}
+
+   atmSigSSCOPErrdPdus   OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "SSCOP Errored PDUs Counter.  This counter counts the
+           sum of the following errors:
+
+           1) Invalid PDUs.
+              These are defined in SSCOP and consist of PDUs
+              with an incorrect length (MAA-ERROR code U), an
+              undefined PDU type code, or that are not 32-bit
+              aligned.
+
+           2) PDUs that result in MAA-ERROR codes and are
+
+              discarded.
+
+           See MAA-ERROR codes A-D, F-M, and Q-T defined in
+           ITU-T Q.2110."
+       REFERENCE
+           "ITU-T Recommendation Q.2110, Broadband
+            Integrated Services Digital Network
+            (B-ISDN) - ATM Adaptation Layer - Service
+            Specific Connection Oriented Protocol (SSCOP)
+            Specification, July 1994."
+       ::= { atmSigStatEntry 2 }
+
+   atmSigDetectSetupAttempts    OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "Call Setup Attempts Counter.  This counter counts
+           the number of call setup attempts (both successful
+           and unsuccessful) detected on this interface."
+       ::= { atmSigStatEntry 3 }
+
+   atmSigEmitSetupAttempts    OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "Call Setup Attempts Counter.  This counter counts
+           the number of call setup attempts (both successful
+           and unsuccessful) transmitted on this interface."
+       ::= { atmSigStatEntry 4 }
+
+   atmSigDetectUnavailRoutes    OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "Number of Route Unavailability detected on this interface.
+           This counter is incremented when a RELEASE, RELEASE COMPLETE
+           (only when not preceded by a RELEASE message for the same
+           call), ADD PARTY REJECT, or STATUS message that
+           contains one of the following cause code values is
+           received (Note: These cause values
+           apply to both UNI3.0 and UNI3.1):
+
+           Cause Value            Meaning
+
+              1            unallocated (unassigned) number
+              2            no route to specified transit network
+              3            no route to destination
+
+           NOTE:  For this counter, RELEASE COMPLETE
+           messages that are a reply to a previous RELEASE
+           message and contain the same cause value, are
+           redundant (for counting purposes) and should not
+           be counted."
+       ::= { atmSigStatEntry 5 }
+
+   atmSigEmitUnavailRoutes    OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "Number of Route Unavailability transmitted from this
+           interface.  This counter is incremented when a RELEASE,
+           RELEASE COMPLETE (only when not preceded by a RELEASE
+           message for the same call), ADD PARTY REJECT, or
+           STATUS message that contains one of the following cause
+           code values is transmitted (Note: These cause values apply
+           to both UNI3.0 and UNI3.1):
+
+           Cause Value            Meaning
+
+              1            unallocated (unassigned) number
+              2            no route to specified transit network
+              3            no route to destination
+
+           NOTE:  For this counter, RELEASE COMPLETE
+           messages that are a reply to a previous RELEASE
+           message and contain the same cause value, are
+           redundant (for counting purposes) and should not
+           be counted."
+       ::= { atmSigStatEntry 6 }
+
+   atmSigDetectUnavailResrcs     OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "Number of Resource Unavailability detected on this
+           interface.  This counter is incremented when a RELEASE,
+           RELEASE COMPLETE (only when not preceded by a RELEASE
+           message for the same call), ADD PARTY REJECT, or
+           STATUS message that contains one of the following
+
+           cause code values is received (Note: These cause
+           values apply to both UNI3.0 and UNI3.1 unless
+           otherwise stated):
+
+           Cause Value          Meaning
+
+              35          requested VPCI/VCI not available
+              37          user cell rate not available (UNI3.1
+                          only)
+              38          network out of order
+              41          temporary failure
+              45          no VPCI/VCI available
+              47          resource unavailable, unspecified
+              49          Quality of Service unavailable
+              51          user cell rate not available (UNI3.0
+                          only)
+              58          bearer capability not presently
+                          available
+              63          Service or option not available,
+                          unspecified
+              92          too many pending add party requests
+
+           NOTE:  For this counter, RELEASE COMPLETE
+           messages that are a reply to a previous RELEASE
+           message and contain the same cause value, are
+           redundant (for counting purposes) and should not
+           be counted."
+       ::= { atmSigStatEntry 7 }
+
+   atmSigEmitUnavailResrcs     OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Number of Resource Unavailability transmitted from this
+          interface.  This counter is incremented when a RELEASE,
+          RELEASE COMPLETE (only when not preceded by a RELEASE message
+          for the same call), ADD PARTY REJECT, or STATUS message that
+          contains one of the following cause code values is transmitted
+          (Note: These cause values apply to both UNI3.0 and UNI3.1
+          unless otherwise stated):
+
+          Cause Value          Meaning
+
+             35          requested VPCI/VCI not available
+             37          user cell rate not available (UNI3.1
+                         only)
+             38          network out of order
+
+             41          temporary failure
+             45          no VPCI/VCI available
+             47          resource unavailable, unspecified
+             49          Quality of Service unavailable
+             51          user cell rate not available (UNI3.0
+                         only)
+             58          bearer capability not presently
+                         available
+             63          Service or option not available,
+                         unspecified
+             92          too many pending add party requests
+
+          NOTE:  For this counter, RELEASE COMPLETE messages that are a
+          reply to a previous RELEASE message and contain the same cause
+          value, are redundant (for counting purposes) and should not be
+          counted."
+      ::= { atmSigStatEntry 8 }
+
+  atmSigDetectCldPtyEvents     OBJECT-TYPE
+      SYNTAX       Counter32
+      MAX-ACCESS   read-only
+      STATUS       current
+      DESCRIPTION
+         "Number of Called Party Responsible For Unsuccessful Call
+         detected on this interface.  This counter is incremented when a
+         RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE
+         message for the same call), ADD PARTY REJECT, or STATUS message
+         that contains one of the following cause code values is
+         received (Note: These cause values apply to both UNI3.0 and
+         UNI3.1):
+
+         Cause Value         Meaning
+
+            17           user busy
+            18           no user responding
+            21           call rejected
+            22           number changed
+            23           user rejects all calls with calling
+                         line identification restriction (CLIR)
+            27           destination out of order
+            31           normal, unspecified
+            88           incompatible destination
+
+         NOTE:  For this counter, RELEASE COMPLETE messages that are a
+         reply to a previous RELEASE message and contain the same cause
+         value, are redundant (for counting purposes) and should not be
+
+         counted.
+
+         Note: Cause Value #30 'response to STATUS ENQUIRY' was not
+         included in this memo since it did not apply to a hard
+         failure."
+     ::= { atmSigStatEntry 9 }
+
+ atmSigEmitCldPtyEvents     OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+        "Number of Called Party Responsible For Unsuccessful Call
+        transmitted from this interface.  This counter is incremented
+        when a RELEASE, RELEASE COMPLETE (only when not preceded by a
+        RELEASE message for the same call), ADD PARTY REJECT, or STATUS
+        message that contains one of the following cause code values is
+        transmitted (Note: These cause values apply to both UNI3.0 and
+        UNI3.1):
+
+        Cause Value         Meaning
+
+           17           user busy
+           18           no user responding
+           21           call rejected
+           22           number changed
+           23           user rejects all calls with calling
+                        line identification restriction (CLIR)
+           27           destination out of order
+           31           normal, unspecified
+           88           incompatible destination
+
+        NOTE:  For this counter, RELEASE COMPLETE messages that are a
+        reply to a previous RELEASE message and contain the same cause
+        value, are redundant (for counting purposes) and should not be
+        counted.
+
+        Note: Cause Value #30 'response to STATUS ENQUIRY' was not
+        included in this memo since it did not apply to a hard failure."
+    ::= { atmSigStatEntry 10 }
+
+atmSigDetectMsgErrors    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Incorrect Messages detected on this interface.  The
+       Incorrect Messages Counter reflects any sort of incorrect
+       information in a message.  This includes:
+
+       - RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
+         and STATUS messages transmitted, that contain any of
+         the Cause values listed below.
+
+       - Ignored messages.  These messages are dropped
+         because the message was so damaged that it could
+         not be further processed.  A list of dropped
+         messages is compiled below:
+
+          1.  Message with invalid protocol discriminator
+
+          2.  Message with errors in the call reference I.E.
+               - Bits 5-8 of the first octet not equal to
+                 '0000'
+               - Bits 1-4 of the first octet indicating a
+                 length other than 3 octets
+               - RELEASE COMPLETE message received with a
+                 call reference that does not relate to a
+                 call active or in progress
+               - SETUP message received with call reference
+                 flag incorrectly set to 1
+               - SETUP message received with a call
+                 reference for a call that is already
+                 active or in progress.
+
+          3.  Message too short
+
+       The following cause values are monitored by this counter (Note:
+       These cause values apply to both UNI3.0 and UNI3.1 unless
+       otherwise stated):
+
+       Cause Value     Meaning
+
+          10     VPCI/VCI unacceptable (UNI3.0 only)
+          36     VPCI/VCI assignment failure (UNI3.1 only)
+          81     invalid call reference value
+          82     identified channel does not exist
+          89     invalid endpoint reference
+          96     mandatory information element is missing
+          97     message type non-existent or not
+                 implemented
+          99     information element non-existent or not
+                 implemented
+
+          100    invalid information element contents
+          101    message not compatible with call state
+          104    incorrect message length
+          111    protocol error, unspecified
+
+          NOTE:  For this counter, RELEASE COMPLETE messages that are
+          a reply to a previous RELEASE message and contain the same
+          cause value, are redundant (for counting purposes) and
+          should not be counted."
+    ::= { atmSigStatEntry 11 }
+
+atmSigEmitMsgErrors    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Incorrect Messages transmitted on this interface.
+       The Incorrect Messages Counter reflects any sort of incorrect
+       information in a message.  This includes:
+
+       - RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
+         and STATUS messages transmitted or
+         received, that contain any of the Cause values
+         listed below.
+
+       - Ignored messages.  These messages are dropped
+         because the message was so damaged that it could
+         not be further processed.  A list of dropped
+         messages is compiled below:
+
+          1.  Message with invalid protocol discriminator
+
+          2.  Message with errors in the call reference I.E.
+               - Bits 5-8 of the first octet not equal to
+                 '0000'
+               - Bits 1-4 of the first octet indicating a
+                 length other than 3 octets
+               - RELEASE COMPLETE message received with a
+                 call reference that does not relate to a
+                 call active or in progress
+               - SETUP message received with call reference
+                 flag incorrectly set to 1
+               - SETUP message received with a call
+                 reference for a call that is already
+                 active or in progress.
+
+          3.  Message too short
+
+       The following cause values are monitored by this counter
+       (Note: These cause values apply to both UNI3.0 and UNI3.1
+       unless otherwise stated):
+
+       Cause Value     Meaning
+
+          10     VPCI/VCI unacceptable (UNI3.0 only)
+          36     VPCI/VCI assignment failure (UNI3.1 only)
+          81     invalid call reference value
+          82     identified channel does not exist
+          89     invalid endpoint reference
+          96     mandatory information element is missing
+          97     message type non-existent or not
+                 implemented
+          99     information element non-existent or not
+                 implemented
+          100    invalid information element contents
+          101    message not compatible with call state
+          104    incorrect message length
+          111    protocol error, unspecified
+
+          NOTE:  For this counter, RELEASE COMPLETE messages that are
+          a reply to a previous RELEASE message and contain the same
+          cause value, are redundant (for counting purposes) and
+          should not be counted."
+    ::= { atmSigStatEntry 12 }
+
+atmSigDetectClgPtyEvents    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Calling Party Events detected on this interface.
+       This counter monitors error events that occur due to the
+       originating user doing something wrong.  This counter is
+       incremented when a RELEASE, RELEASE COMPLETE (only when not
+       preceded by a RELEASE message for the same call), ADD PARTY
+       REJECT, or STATUS message that contains one of the following
+       cause code values is received (Note: These cause values
+       apply to both UNI3.0 and UNI3.1):
+
+       Cause Value     Meaning
+
+          28     invalid number format (address incomplete)
+          43     access information discarded
+          57     bearer capability not authorized
+          65     bearer capability not implemented
+
+          73     unsupported combination of traffic
+                 parameters
+          78     AAL parameters cannot be supported (UNI3.1
+                 only)
+          91     invalid transit network selection
+          93     AAL parameters cannot be supported (UNI3.0
+                 only)
+
+          NOTE:  For this counter, RELEASE COMPLETE messages that
+          are a reply to a previous RELEASE message and contain
+          the same cause value, are redundant (for counting purposes)
+          and should not be counted."
+    ::= { atmSigStatEntry 13 }
+
+atmSigEmitClgPtyEvents    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Calling Party Events transmitted from this interface.
+       This counter monitors error events that occur due to the
+       originating user doing something wrong.  This counter is
+       incremented when a RELEASE, RELEASE COMPLETE (only when not
+       preceded by a RELEASE message for the same call), ADD PARTY
+       REJECT, or STATUS message that contains one of the following
+       cause code values is transmitted (Note: These cause values
+       apply to both UNI3.0 and UNI3.1):
+
+       Cause Value     Meaning
+
+          28     invalid number format (address incomplete)
+          43     access information discarded
+          57     bearer capability not authorized
+          65     bearer capability not implemented
+          73     unsupported combination of traffic
+                 parameters
+          78     AAL parameters cannot be supported (UNI3.1
+                 only)
+          91     invalid transit network selection
+          93     AAL parameters cannot be supported (UNI3.0
+                 only)
+
+          NOTE:  For this counter, RELEASE COMPLETE messages that are
+          a reply to a previous RELEASE message and contain the same
+          cause value, are redundant (for counting purposes) and
+          should not be counted."
+    ::= { atmSigStatEntry 14 }
+
+atmSigDetectTimerExpireds    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Timer Expiries detected on this interface.  The Timer
+       Expiries Counter provides a count of network timer expiries, and
+       to some extent, host or switch timer expiries.  The conditions
+       for incrementing this counter are:
+
+          - Expiry of any network timer
+
+          - Receipt of a RELEASE or RELEASE COMPLETE
+            message with Cause #102, 'recovery on
+            timer expiry'.
+
+          NOTE:  For this counter, RELEASE COMPLETE messages that are
+          a reply to a previous RELEASE message and contain the same
+          cause value, are redundant (for counting purposes) and
+          should not be counted."
+    ::= { atmSigStatEntry 15 }
+
+atmSigEmitTimerExpireds    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Timer Expiries transmitted from this interface.
+       The Timer Expiries Counter provides a count of network timer
+       expiries, and to some extent, host or switch timer expiries.
+       The conditions for incrementing this counter are:
+
+          - Expiry of any network timer
+
+          - Receipt of a RELEASE or RELEASE COMPLETE
+            message with Cause #102, 'recovery on
+            timer expiry'.
+
+       NOTE:  For this counter, RELEASE COMPLETE messages that are a
+       reply to a previous RELEASE message and contain the same cause
+       value, are redundant (for counting purposes) and should not be
+       counted."
+    ::= { atmSigStatEntry 16 }
+
+atmSigDetectRestarts    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Restart Activity errors detected on this interface.
+       The Restart Activity Counter provides a count of host, switch,
+       or network restart activity.  This counter is incremented when
+       receiving a RESTART message."
+    ::= { atmSigStatEntry 17 }
+
+atmSigEmitRestarts    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of Restart Activity errors transmitted from this
+       interface.  The Restart Activity Counter provides a count of
+       host, switch, or network restart activity.  This counter is
+       incremented when transmitting a RESTART message."
+    ::= { atmSigStatEntry 18 }
+
+atmSigInEstabls    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of SVCs established at this signalling entity for
+       incoming connections."
+    ::= { atmSigStatEntry 19 }
+
+atmSigOutEstabls    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of SVCs established at this signalling entity for
+       outgoing connections."
+    ::= { atmSigStatEntry 20 }
+
+  -- 4. ATM Interface Signalling Support Table
+  --
+  -- This table provides information to support
+  -- the signalling process which is used to establish
+  -- ATM Switched Virtual Connections (SVCs).
+
+atmSigSupportTable       OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmSigSupportEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains ATM local interface configuration
+       parameters, one entry per ATM signalling interface."
+    ::= { atm2MIBObjects 4 }
+
+atmSigSupportEntry         OBJECT-TYPE
+    SYNTAX       AtmSigSupportEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This list contains signalling configuration parameters
+       and state variables."
+    INDEX { ifIndex }
+    ::= { atmSigSupportTable  1}
+
+AtmSigSupportEntry    ::= SEQUENCE  {
+    atmSigSupportClgPtyNumDel       INTEGER,
+    atmSigSupportClgPtySubAddr      INTEGER,
+    atmSigSupportCldPtySubAddr      INTEGER,
+    atmSigSupportHiLyrInfo          INTEGER,
+    atmSigSupportLoLyrInfo          INTEGER,
+    atmSigSupportBlliRepeatInd      INTEGER,
+    atmSigSupportAALInfo            INTEGER,
+    atmSigSupportPrefCarrier        OCTET STRING
+}
+
+atmSigSupportClgPtyNumDel     OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object indicates whether the Calling Party Number
+       Information Element is transferred to the called party
+       address.  The value of this object can be:
+
+         - enabled(1)  This Information Element is transferred
+                       to the called party
+
+         - disabled(2) This Information Element is NOT
+                       transferred to the called party."
+    ::= { atmSigSupportEntry 1 }
+
+atmSigSupportClgPtySubAddr   OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object indicates whether to accept and transfer the Calling
+       Party Subaddress Information Element from the calling party to
+       the called party.  Calling party subaddress information shall
+       only be transferred to the called party if calling party number
+       delivery is enabled (i.e., atmSigSupportClgPtyNumDel =
+       'enabled(1)'.  The value of this object can be:
+
+         - enabled(1)  This Information Element is transferred
+                       to the called party
+
+         - disabled(2) This Information Element is NOT
+                       transferred to the called party."
+    ::= { atmSigSupportEntry 2 }
+
+atmSigSupportCldPtySubAddr    OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object indicates whether to accept, transfer, and deliver
+       the Called Party Subaddress Information Element from the calling
+       party to the called party.  The value of this object can be:
+
+         - enabled(1)  This Information Element is transferred
+                       to the called party
+
+         - disabled(2) This Information Element is NOT
+                       transferred to the called party."
+    ::= { atmSigSupportEntry 3 }
+
+atmSigSupportHiLyrInfo     OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object indicates whether to accept, transfer, and deliver
+       the Broadband High Layer Information Element from the calling
+       party to the called party.  The value of this object can be:
+
+         - enabled(1)  This Information Element is transferred
+                       to the called party
+
+         - disabled(2) This Information Element is NOT
+                       transferred to the called party."
+    ::= { atmSigSupportEntry 4 }
+
+atmSigSupportLoLyrInfo     OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object indicates whether to accept, transfer, and deliver
+       the Broadband Low Layer Information Element from the calling
+       party to the called party.  The value of this object can be:
+
+         - enabled(1)  This Information Element is transferred
+                       to the called party
+
+         - disabled(2) This Information Element is NOT
+                       transferred to the called party."
+    ::= { atmSigSupportEntry 5 }
+
+atmSigSupportBlliRepeatInd      OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This object indicates whether to accept, transfer, and deliver
+        the Broadband Repeat Indicator with two or three instances of
+        the Broadband Low Layer Information Element for low layer
+        information selection from the calling party to the called
+        party.  This object's value should always be disabled(2) if
+        the value of atmSigSupportLolyrInfo is disabled(2).
+
+        The value of this object can be:
+
+        - enabled(1)  This Information Element is transferred
+              to the called party
+
+        - disabled(2) This Information Element is NOT
+              transferred to the called party."
+    ::= { atmSigSupportEntry 6 }
+
+atmSigSupportAALInfo     OBJECT-TYPE
+    SYNTAX       INTEGER  { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object indicates whether to accept, transfer, and deliver
+       the ATM Adaptation Layer Parameters Information Element from the
+       calling party to the called party.  The value of this object can
+       be:
+
+         - enabled(1)  This Information Element is transferred
+                       to the called party
+
+         - disabled(2) This Information Element is NOT
+                       transferred to the called party."
+    ::= { atmSigSupportEntry 7 }
+
+atmSigSupportPrefCarrier     OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE(0|4))
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This parameter identifies the carrier to which intercarrier
+       calls originated from this interface are routed when transit
+       network selection information is not provided by the calling
+       party.  If a Carrier Identification Code (CIC) is used the
+       parameter shall contain the CIC.  For three-digit CICs, the first
+       octet shall be '0' and the CIC is contained in the three
+       following octets.  If the preferred carrier feature is not
+       supported the value is a zero-length string."
+    ::= { atmSigSupportEntry 8 }
+
+  -- 5. ATM Signalling Descriptor Parameter Table
+
+    atmSigDescrParamTable     OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmSigDescrParamEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "A table contains signalling capabilities of VCLs except the
+            Traffic Descriptor.  Traffic descriptors are described in
+            the atmTrafficDescrParamTable."
+        REFERENCE
+            "ATM User-Network Interface Specification, Version 3.1 (UNI
+            3.1), September 1994, Section 5.4.5 Variable Length
+            Information Elements."
+        ::= { atm2MIBObjects 5 }
+
+    atmSigDescrParamEntry        OBJECT-TYPE
+        SYNTAX       AtmSigDescrParamEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry in this table represents a
+            set of signalling capabilities that can
+            be applied to a VCL.  There is no requirement
+            for unique entries, except that the index must
+            be unique."
+        INDEX { atmSigDescrParamIndex }
+        ::= { atmSigDescrParamTable 1 }
+
+    AtmSigDescrParamEntry ::=
+        SEQUENCE {
+            atmSigDescrParamIndex
+                                   AtmSigDescrParamIndex,
+            atmSigDescrParamAalType         INTEGER,
+            atmSigDescrParamAalSscsType     INTEGER,
+            atmSigDescrParamBhliType        INTEGER,
+            atmSigDescrParamBhliInfo        OCTET STRING,
+            atmSigDescrParamBbcConnConf     INTEGER,
+            atmSigDescrParamBlliLayer2      INTEGER,
+            atmSigDescrParamBlliLayer3      INTEGER,
+            atmSigDescrParamBlliPktSize     INTEGER,
+            atmSigDescrParamBlliSnapId      INTEGER,
+            atmSigDescrParamBlliOuiPid      OCTET STRING,
+            atmSigDescrParamRowStatus       RowStatus
+        }
+
+    atmSigDescrParamIndex OBJECT-TYPE
+        SYNTAX       AtmSigDescrParamIndex
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "The value of this object is used by the
+            atmVclGenSigDescrIndex object in the atmVclGenTable to
+            identify a row in this table."
+        ::= { atmSigDescrParamEntry 1 }
+
+     atmSigDescrParamAalType OBJECT-TYPE
+         SYNTAX       INTEGER {
+            other(1),       -- not defined
+            aal1(2),        -- AAL type 1
+            aal34(3),       -- AAL type 3/4
+            aal5(4),        -- AAL type 5
+
+            userDefined(5), -- User-Defined AAL
+            aal2(6)         -- AAL type 2
+            }
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "The AAL type.  The value of this object is set to other(1)
+            when not defined."
+         DEFVAL { other }
+         ::= { atmSigDescrParamEntry 2 }
+
+     atmSigDescrParamAalSscsType OBJECT-TYPE
+         SYNTAX       INTEGER {
+            other(1),       -- other, or not used
+            assured(2),     -- Data SSCS based on SSCOP
+                            -- assured operation
+            nonassured(3),  -- Data SSCS based on SSCOP
+                            -- non-assured operation
+            frameRelay(4),  -- frame relay SSCS
+            null(5)         -- null
+
+            }
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "The SSCS type used by this entry."
+         DEFVAL { other }
+         ::= { atmSigDescrParamEntry 3 }
+
+     atmSigDescrParamBhliType OBJECT-TYPE
+         SYNTAX       INTEGER {
+            other(1),         -- not defined
+            iso(2),           -- ISO
+            user(3),          -- User specific
+            hiProfile(4),     -- Higher layer profile
+                              -- this enum applicable to
+                              -- UNI 3.0 only
+            vendorSpecific(5) -- Vender specific
+                              -- application identifier
+            }
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "The Broadband high layer type."
+         DEFVAL { other }
+         ::= { atmSigDescrParamEntry 4 }
+
+     atmSigDescrParamBhliInfo OBJECT-TYPE
+         SYNTAX     OCTET STRING (SIZE(0..8))
+         MAX-ACCESS read-create
+         STATUS     current
+         DESCRIPTION
+            "The Broadband high layer information.  When
+            atmSigDescrParamBhliType is set to iso(2), the value of this
+            object is a zero length string.  When
+            atmSigDescrParamBhliType is set to user(3), the value of
+            this object is an octet string with length ranging from 0 to
+            8.  When atmSigDescrParamBhliType is set to hiProfile(4),
+            the value of this object is a length of 4 octet string
+            containing user to user profile identifier.  When
+            atmSigDescrParamBhliType is set to vendorSpecific(5), the
+            value of this object is a length of 7 octet string, where
+            the most significant 3 octets consist of a globally-
+            administered OUI, and the least significant 4 octets are the
+            vender administered application OUI."
+         DEFVAL { ''H }
+         ::= { atmSigDescrParamEntry 5 }
+
+     atmSigDescrParamBbcConnConf OBJECT-TYPE
+         SYNTAX       INTEGER {
+             ptp(1),   -- point-to-point
+             ptmp(2)   -- point-to-multipoint
+             }
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+             "The Broadband bearer capability user plane connection
+              configuration parameter."
+         DEFVAL { ptp }
+         ::= { atmSigDescrParamEntry 6 }
+
+      atmSigDescrParamBlliLayer2 OBJECT-TYPE
+          SYNTAX       INTEGER {
+             other(1),        -- not specified
+             iso1745(2),      -- Basic mode ISO 1745
+             q921(3),         -- CCITT Recommendation Q.921
+             x25linklayer(4), -- CCITT Recommendation X.25
+                              -- Link Layer
+             x25multilink(5), -- CCITT Recommendation X.25
+                              -- Multilink
+             lapb(6),         -- Extended LAPB; for half
+
+                              -- duplex operation
+             hdlcArm(7),      -- HDLC ARM (ISO 4335)
+             hdlcNrm(8),      -- HDLC NRM (ISO 4335)
+             hdlcAbm(9),      -- HDLC ABM (ISO 4335)
+             iso88022(10),    -- LAN logical link control
+                              -- (ISO 8802/2)
+             x75slp(11),      -- CCITT Recommendation X.75,
+                              -- single link
+                              -- procedure (SLP)
+             q922(12),        -- CCITT Recommendation Q.922
+             userDef(13),     -- User specified
+             iso7776(14)      -- ISO 7776 DTE-DTE operation
+             }
+          MAX-ACCESS   read-create
+          STATUS       current
+          DESCRIPTION
+            "The Broadband low layer information, protocol type of layer
+            2.  The value of this object is other(1) if layer 2 protocol
+            is not used."
+          DEFVAL { other }
+          ::= { atmSigDescrParamEntry 7 }
+
+      atmSigDescrParamBlliLayer3 OBJECT-TYPE
+          SYNTAX       INTEGER {
+             other(1),       -- not specified
+             x25pkt(2),      -- CCITT Recommendation X.25
+                             -- packet layer
+             isoiec8208(3),  -- ISO/IEC 8208 (X.25 packet
+                             -- level protocol for data
+                             -- terminal equipment)
+             x223iso8878(4), -- X.223/ISO 8878
+             isoiec8473(5),  -- ISO/IEC 8473 OSI
+                             -- connectionless
+                             -- mode protocol
+             t70(6),         -- CCITT Recommendation T.70
+                             -- minimum
+                             -- network layer
+             tr9577(7),      -- ISO/IEC TR 9577 Protocol
+                             -- Identification in the
+                             -- network layer
+             userDef(8)      -- user specified
+
+             }
+          MAX-ACCESS   read-create
+          STATUS       current
+          DESCRIPTION
+            "The Broadband low layer information, protocol type of layer
+
+            3.  The value of this object is other(1) if layer 3 protocol
+            is not used."
+          DEFVAL { other }
+          ::= { atmSigDescrParamEntry 8 }
+
+      atmSigDescrParamBlliPktSize OBJECT-TYPE
+          SYNTAX       INTEGER {
+             other(1),        -- not used
+             s16(2),          -- 16 octets
+             s32(3),          -- 32 octets
+             s64(4),          -- 64 octets
+             s128(5),         -- 128 octets
+             s256(6),         -- 256 octets
+             s512(7),         -- 512 octets
+             s1024(8),        -- 1028 octets
+             s2048(9),        -- 2048 octets
+             s4096(10)        -- 4096 octets
+          }
+          MAX-ACCESS   read-create
+          STATUS       current
+          DESCRIPTION
+            "The default packet size defined in B-LLI."
+          DEFVAL { other }
+          ::= { atmSigDescrParamEntry 9 }
+
+      atmSigDescrParamBlliSnapId OBJECT-TYPE
+          SYNTAX       INTEGER {
+             other(1),  -- not used
+             true(2),   -- SNAP ID is 1
+             false(3)   -- SNAP ID is 0
+          }
+          MAX-ACCESS   read-create
+          STATUS       current
+          DESCRIPTION
+            "The SNAP ID used for Broadband low layer protocol layer 3.
+            The value of this object is other(1) if
+            atmSigDescrParamBlliLayer3 is set to other(1)."
+          DEFVAL { other }
+          ::= { atmSigDescrParamEntry 10 }
+
+      atmSigDescrParamBlliOuiPid OBJECT-TYPE
+          SYNTAX       OCTET STRING (SIZE(0|5))
+          MAX-ACCESS   read-create
+          STATUS       current
+          DESCRIPTION
+            "The OUI/PID encoding for Broadband low layer protocol layer
+            3.  The value of this object is a zero length string if
+            atmSigDescrParamBlliLayer3 is set to other(1).  When used,
+            it is always 5 octets with the most significant octet as the
+            OUI Octet 1 and the least significant octet as the PID Octet
+            2."
+          DEFVAL { ''H }
+          ::= { atmSigDescrParamEntry 11 }
+
+       atmSigDescrParamRowStatus OBJECT-TYPE
+           SYNTAX       RowStatus
+           MAX-ACCESS   read-create
+           STATUS       current
+           DESCRIPTION
+            "This object is used to create and delete rows in the
+            atmSigDescrParamTable."
+           ::= { atmSigDescrParamEntry 12 }
+
+  -- 6. ATM Interface Registered Address Table --
+
+atmIfRegisteredAddrTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmIfRegisteredAddrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains a list of ATM addresses that can be used for
+       calls to and from a given interface by a switch or service.  The
+       ATM addresses are either registered by the endsystem via ILMI or
+       statically configured.  This table does not expose PNNI
+       reachability information.  ILMI registered addresses cannot be
+       deleted using this table.  This table only applies to switches
+       and network services."
+    ::= { atm2MIBObjects 6 }
+
+atmIfRegisteredAddrEntry    OBJECT-TYPE
+    SYNTAX       AtmIfRegisteredAddrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the ATM Interface Registered Address table."
+    INDEX { ifIndex, atmIfRegAddrAddress }
+    ::= { atmIfRegisteredAddrTable  1}
+
+AtmIfRegisteredAddrEntry    ::= SEQUENCE  {
+    atmIfRegAddrAddress             AtmAddr,
+    atmIfRegAddrAddressSource       INTEGER,
+    atmIfRegAddrOrgScope            INTEGER,
+    atmIfRegAddrRowStatus           RowStatus
+         }
+
+atmIfRegAddrAddress   OBJECT-TYPE
+    SYNTAX       AtmAddr
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An address registered for a given switch or service interface."
+    ::= { atmIfRegisteredAddrEntry 1}
+
+atmIfRegAddrAddressSource  OBJECT-TYPE
+    SYNTAX       INTEGER  {
+       other(1),
+       static(2),
+       dynamic(3)
+       }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The type of address source for a given ATM Address. The value
+       dynamic(3) is indicated when ILMI is used."
+    ::= { atmIfRegisteredAddrEntry 2}
+
+atmIfRegAddrOrgScope  OBJECT-TYPE
+    SYNTAX       INTEGER {
+        localNetwork(1),
+        localNetworkPlusOne(2),
+        localNetworkPlusTwo(3),
+        siteMinusOne(4),
+        intraSite(5),
+        sitePlusOne(6),
+        organizationMinusOne(7),
+        intraOrganization(8),
+        organizationPlusOne(9),
+        communityMinusOne(10),
+        intraCommunity(11),
+        communityPlusOne(12),
+        regional(13),
+        interRegional(14),
+        global(15)
+    }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object indicates the organizational scope for
+        the referenced address.  The information of the
+        referenced address shall not be distributed outside
+        the indicated scope.   Refer to Annex 5.3 of ATM
+        Forum UNI Signalling 4.0 for guidelines regarding
+        the use of organizational scopes.
+
+        This value cannot be configured for ILMI-registered
+        addresses.
+
+        The default values for organizational scope are
+        localNetwork(1) for ATM group addresses, and
+        global(15) for individual addresses."
+    ::= { atmIfRegisteredAddrEntry 3}
+
+atmIfRegAddrRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This object is used to create and delete rows in the
+       atmIfRegisteredAddrTable.  Rows created dynamically (e.g., ILMI-
+       registered addresses) cannot be deleted using this object."
+    ::= { atmIfRegisteredAddrEntry 4}
+
+  -- 7. ATM VPI/VCI to Address Mapping Table
+
+    atmVclAddrTable  OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmVclAddrEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "This table provides a mapping between the atmVclTable and
+            the ATM called party/calling party address.  This table can
+            be used to retrieve the calling party and called party ATM
+            address pair for a given VCL.  Note that there can be more
+            than one pair of calling party and called party ATM
+            addresses for a VCL in a point to multi-point call."
+        ::= { atm2MIBObjects 7 }
+
+    atmVclAddrEntry    OBJECT-TYPE
+        SYNTAX       AtmVclAddrEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry in this table represents a binding between a VCL
+            and an ATM address associated with this call.  This ATM
+
+            address can be either the called party address or the
+            calling party address.  There can be more than one pair of
+            calling/called party ATM addresses associated with the VCL
+            entry for point to multi-point calls.  Objects
+            atmVclAddrType, and atmVclAddrRowStatus are
+            required during row creation."
+        INDEX  { ifIndex, atmVclVpi, atmVclVci,
+                 atmVclAddrAddr }
+        ::= { atmVclAddrTable 1 }
+
+    AtmVclAddrEntry ::=
+        SEQUENCE {
+            atmVclAddrAddr          AtmAddr,
+            atmVclAddrType          INTEGER,
+            atmVclAddrRowStatus     RowStatus
+        }
+
+    atmVclAddrAddr     OBJECT-TYPE
+        SYNTAX       AtmAddr
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "An ATM address on one end of the VCL.  For SVCs, the agent
+            supplies the value of this object at creation time.  For PVC
+            VCL, the manager can supply the value of this object during
+            or after the PVC VCL creation."
+        ::= { atmVclAddrEntry 1 }
+
+   atmVclAddrType     OBJECT-TYPE
+       SYNTAX       INTEGER {
+           callingParty(1),
+           calledParty(2)
+       }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+            "The type of ATM Address represented by the object
+            atmVclAddrAddr.  Choices are either the calling party ATM
+            address or the called party ATM address."
+       ::= { atmVclAddrEntry 2 }
+
+   atmVclAddrRowStatus     OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+           "This object is used to create or destroy an
+           entry from this table.  Note that the manager entity
+
+           can only destroy the PVC VCLs."
+       ::= { atmVclAddrEntry 3 }
+
+  -- 8. ATM Address to VPI/VCI Mapping Table
+  --
+  -- This table provides an alternative way to access
+  -- a row in the atmVclAddrTable by using
+  -- an ATM address as an index, instead of
+  -- the ifIndex
+
+    atmAddrVclTable   OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmAddrVclEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "This table provides an alternative way to retrieve the
+            atmVclTable.  This table can be used to retrieve the
+            indexing to the atmVclTable by an ATM address."
+        ::= { atm2MIBObjects 8 }
+
+    atmAddrVclEntry    OBJECT-TYPE
+        SYNTAX       AtmAddrVclEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry in this table represents an entry in the
+            atmVclTable of the ATM-MIB by its ATM address.  The ATM
+            address is either the calling or called party ATM address
+            of the call.  Entries in this table are read only.
+            They show up when entries are created in the
+            atmVclAddrTable."
+        REFERENCE
+            "Tesink, K., Editor, Definitions of Managed Objects
+             for ATM Management, RFC 2515, Bell Communications
+             Research, February, 1999."
+        INDEX { atmVclAddrAddr, atmAddrVclAtmIfIndex,
+                atmAddrVclVpi, atmAddrVclVci }
+        ::= { atmAddrVclTable 1 }
+
+    AtmAddrVclEntry ::=
+        SEQUENCE {
+            atmAddrVclAtmIfIndex    InterfaceIndex,
+            atmAddrVclVpi           AtmVpIdentifier,
+            atmAddrVclVci           AtmVcIdentifier,
+            atmAddrVclAddrType      INTEGER
+            }
+
+    atmAddrVclAtmIfIndex     OBJECT-TYPE
+        SYNTAX       InterfaceIndex
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "The interface index of the ATM interface to which this
+             VCL pertains.  This object combined with the
+             atmAddrVclVpi and atmAddrVclVci objects serves as an
+             index to the atmVclTable."
+        ::= { atmAddrVclEntry 1 }
+
+    atmAddrVclVpi     OBJECT-TYPE
+        SYNTAX       AtmVpIdentifier
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "The VPI value of the VCL.  This object combined with the
+            atmAddrVclAtmIfIndex and atmAddrVclVci objects serves as
+            an index to the atmVclTable."
+        ::= { atmAddrVclEntry 2 }
+
+    atmAddrVclVci     OBJECT-TYPE
+        SYNTAX       AtmVcIdentifier
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "The VCI value of the VCL.  This object combined with the
+            atmAddrVclAtmIfIndex and atmAddrVclVpi objects serves as
+            an index to the atmVclTable."
+        ::= { atmAddrVclEntry 3 }
+
+   atmAddrVclAddrType     OBJECT-TYPE
+       SYNTAX       INTEGER {
+           callingParty(1),
+           calledParty(2) }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "The type of ATM Address represented by the object
+            atmVclAddrAddr.  Choices are either calling party address
+            or called party address."
+       ::= { atmAddrVclEntry 4 }
+
+  -- 9. ATM VPL Statistics Table
+
+    atmVplStatTable   OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmVplStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "This table contains all statistics counters per VPL.  It is
+            used to monitor the usage of the VPL in terms of incoming
+            cells and outgoing cells."
+        ::= { atm2MIBObjects 9 }
+
+    atmVplStatEntry    OBJECT-TYPE
+        SYNTAX       AtmVplStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry in this table represents a VPL."
+        INDEX { ifIndex, atmVplVpi }
+        ::= { atmVplStatTable 1 }
+
+    AtmVplStatEntry ::=
+        SEQUENCE {
+            atmVplStatTotalCellIns      Counter32,
+            atmVplStatClp0CellIns       Counter32,
+            atmVplStatTotalDiscards     Counter32,
+            atmVplStatClp0Discards      Counter32,
+            atmVplStatTotalCellOuts     Counter32,
+            atmVplStatClp0CellOuts      Counter32,
+            atmVplStatClp0Tagged        Counter32
+    }
+
+    atmVplStatTotalCellIns OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells received by this VPL
+            including both CLP=0 and CLP=1 cells.  The cells are
+            counted prior to the application of the traffic policing."
+        ::= { atmVplStatEntry 1 }
+
+    atmVplStatClp0CellIns OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The number of valid ATM cells received by this VPL with
+            CLP=0.  The cells are counted prior to the application of
+            the traffic policing."
+        ::= { atmVplStatEntry 2 }
+
+    atmVplStatTotalDiscards OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells discarded by the
+            traffic policing entity.  This includes cells originally
+            received with CLP=0 and CLP=1."
+        ::= { atmVplStatEntry 3 }
+
+    atmVplStatClp0Discards OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells received with CLP=0 and
+            discarded by the traffic policing entity."
+        ::= { atmVplStatEntry 4 }
+
+    atmVplStatTotalCellOuts OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells transmitted  by this
+            VPL.  This includes both CLP=0 and CLP=1 cells."
+        ::= { atmVplStatEntry 5 }
+
+    atmVplStatClp0CellOuts OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells transmitted with CLP=0
+            by this VPL."
+        ::= { atmVplStatEntry 6 }
+
+    atmVplStatClp0Tagged OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells tagged by the traffic
+            policing entity from CLP=0 to CLP=1."
+        ::= { atmVplStatEntry 7 }
+
+  -- 10. ATM Logical Port Configuration Table
+
+    atmVplLogicalPortTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmVplLogicalPortEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Indicates whether the VPL is an ATM Logical Port interface
+            (ifType=80)."
+        ::= { atm2MIBObjects 10 }
+
+    atmVplLogicalPortEntry OBJECT-TYPE
+        SYNTAX       AtmVplLogicalPortEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "An entry with information about the ATM Logical Port
+            interface."
+        AUGMENTS { atmVplEntry }
+        ::= { atmVplLogicalPortTable 1 }
+
+    AtmVplLogicalPortEntry ::=
+        SEQUENCE {
+            atmVplLogicalPortDef        INTEGER,
+            atmVplLogicalPortIndex      InterfaceIndexOrZero
+            }
+
+    atmVplLogicalPortDef   OBJECT-TYPE
+        SYNTAX       INTEGER {
+                        notLogicalIf(1),
+                        isLogicalIf(2)
+                        }
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+            "Indicates whether the VPC at this VPL interface is an ATM
+            Logical Port interface."
+        DEFVAL { notLogicalIf }
+        ::= { atmVplLogicalPortEntry 1 }
+
+    atmVplLogicalPortIndex OBJECT-TYPE
+        SYNTAX       InterfaceIndexOrZero
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The ifTable index of the ATM logical port interface
+            associated with this VPL. The distinguished value of zero
+            indicates that the agent has not (yet) assigned such an
+            ifTable Index. The zero value must be assigned by the agent
+            if the value of atmVplLogicalPortDef is set to notLogicalIf,
+            or if the VPL row is not active."
+        ::= { atmVplLogicalPortEntry 2 }
+
+  -- 11. ATM VCL Statistics Table
+
+    atmVclStatTable   OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmVclStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "This table contains all statistics counters per VCL.  It is
+            used to monitor the usage of the VCL in terms of incoming
+            cells and outgoing cells."
+        ::= { atm2MIBObjects 11 }
+
+    atmVclStatEntry    OBJECT-TYPE
+        SYNTAX       AtmVclStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry in this table represents a VCL."
+        INDEX { ifIndex, atmVclVpi, atmVclVci }
+        ::= { atmVclStatTable 1 }
+
+    AtmVclStatEntry ::=
+        SEQUENCE {
+            atmVclStatTotalCellIns      Counter32,
+            atmVclStatClp0CellIns       Counter32,
+            atmVclStatTotalDiscards     Counter32,
+            atmVclStatClp0Discards      Counter32,
+            atmVclStatTotalCellOuts     Counter32,
+            atmVclStatClp0CellOuts      Counter32,
+            atmVclStatClp0Tagged        Counter32
+        }
+
+    atmVclStatTotalCellIns OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells received by this VCL
+            including both CLP=0 and CLP=1 cells.  The cells are counted
+            prior to the application of the traffic policing."
+        ::= { atmVclStatEntry 1 }
+
+    atmVclStatClp0CellIns OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The number of valid ATM cells received by this VCL with
+            CLP=0.  The cells are counted prior to the application of
+            the traffic policing."
+        ::= { atmVclStatEntry 2 }
+
+    atmVclStatTotalDiscards OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells discarded by the
+            traffic policing entity.  This includes cells originally
+            received with CLP=0 and CLP=1."
+        ::= { atmVclStatEntry 3 }
+
+    atmVclStatClp0Discards OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells received with CLP=0
+             and discarded by the traffic policing entity."
+        ::= { atmVclStatEntry 4 }
+
+    atmVclStatTotalCellOuts OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells transmitted  by this
+            VCL.  This includes both CLP=0 and CLP=1 cells."
+        ::= { atmVclStatEntry 5 }
+
+    atmVclStatClp0CellOuts OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells transmitted with CLP=0
+            by this VCL."
+        ::= { atmVclStatEntry 6 }
+
+    atmVclStatClp0Tagged OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The total number of valid ATM cells tagged by the traffic
+            policing entity from CLP=0 to CLP=1."
+        ::= { atmVclStatEntry 7 }
+
+  -- 12. ATM AAL5 per-VCC Statistics Table
+
+    atmAal5VclStatTable   OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmAal5VclStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "This table provides a collection of objects providing AAL5
+            configuration and performance statistics of a VCL."
+        ::= { atm2MIBObjects 12 }
+
+    atmAal5VclStatEntry    OBJECT-TYPE
+        SYNTAX       AtmAal5VclStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "Each entry in this table represents an AAL5 VCL, and
+             is indexed by ifIndex values of AAL5 interfaces and
+             the associated VPI/VCI values."
+        INDEX { ifIndex, atmVclVpi, atmVclVci }
+        ::= { atmAal5VclStatTable 1 }
+
+    AtmAal5VclStatEntry ::=
+        SEQUENCE {
+           atmAal5VclInPkts        Counter32,
+           atmAal5VclOutPkts       Counter32,
+           atmAal5VclInOctets      Counter32,
+           atmAal5VclOutOctets     Counter32
+        }
+
+    atmAal5VclInPkts      OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The number of AAL5 CPCS PDUs received on the AAL5 VCC at
+            the interface identified by the ifIndex."
+        ::= { atmAal5VclStatEntry 1 }
+
+    atmAal5VclOutPkts   OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The number of AAL5 CPCS PDUs transmitted on the AAL5 VCC
+             at the interface identified by the ifIndex."
+        ::= { atmAal5VclStatEntry 2 }
+
+    atmAal5VclInOctets   OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The number of octets contained in AAL5 CPCS PDUs received
+            on the AAL5 VCC at the interface identified by the ifIndex."
+        ::= { atmAal5VclStatEntry 3 }
+
+    atmAal5VclOutOctets   OBJECT-TYPE
+        SYNTAX       Counter32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The number of octets contained in AAL5 CPCS PDUs
+            transmitted on the AAL5 VCC at the interface identified by
+            the ifIndex."
+        ::= { atmAal5VclStatEntry 4 }
+
+  -- 13. ATM VC General Information Table
+
+    atmVclGenTable OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AtmVclGenEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "General Information for each VC."
+        ::= { atm2MIBObjects 13 }
+
+    atmVclGenEntry OBJECT-TYPE
+        SYNTAX       AtmVclGenEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "An entry with general information about the ATM VC."
+        AUGMENTS { atmVclEntry }
+        ::= { atmVclGenTable 1 }
+
+    AtmVclGenEntry ::=
+        SEQUENCE {
+          atmVclGenSigDescrIndex      AtmSigDescrParamIndex
+        }
+
+    atmVclGenSigDescrIndex   OBJECT-TYPE
+        SYNTAX       AtmSigDescrParamIndex
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+            "The value of this object identifies the row in the ATM
+            Signalling Descriptor Parameter Table which applies to this
+            VCL."
+        ::= { atmVclGenEntry 1 }
+
+  -- 14. ATM Interface Configuration Extension Table
+
+atmInterfaceExtTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmInterfaceExtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains ATM interface configuration and monitoring
+       information not defined in the atmInterfaceConfTable from the
+       ATM-MIB.  This includes the type of connection setup procedures,
+       ILMI information, and information on the VPI/VCI range."
+    REFERENCE
+        "Tesink, K., Editor, Definitions of Managed Objects
+         for ATM Management, RFC 2515, Bell Communications
+         Research, February, 1999."
+    ::= { atm2MIBObjects 14 }
+
+atmInterfaceExtEntry    OBJECT-TYPE
+    SYNTAX       AtmInterfaceExtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry extends the atmInterfaceConfEntry defined in the ATM-
+       MIB.  Each entry corresponds to an ATM interface."
+    REFERENCE
+        "Tesink, K., Editor, Definitions of Managed Objects
+         for ATM Management, RFC 2515, Bell Communications
+         Research, February, 1999."
+    AUGMENTS { atmInterfaceConfEntry }
+    ::= { atmInterfaceExtTable 1 }
+
+AtmInterfaceExtEntry    ::= SEQUENCE  {
+        atmIntfConfigType                   AtmInterfaceType,
+        atmIntfActualType                   AtmInterfaceType,
+        atmIntfConfigSide                   INTEGER,
+        atmIntfActualSide                   INTEGER,
+        atmIntfIlmiAdminStatus              BITS,
+        atmIntfIlmiOperStatus               BITS,
+        atmIntfIlmiFsmState                 INTEGER,
+        atmIntfIlmiEstablishConPollIntvl    Integer32,
+        atmIntfIlmiCheckConPollIntvl        Integer32,
+        atmIntfIlmiConPollInactFactor       Integer32,
+        atmIntfIlmiPublicPrivateIndctr      INTEGER,
+        atmInterfaceConfMaxSvpcVpi          INTEGER,
+        atmInterfaceCurrentMaxSvpcVpi       INTEGER,
+        atmInterfaceConfMaxSvccVpi          INTEGER,
+        atmInterfaceCurrentMaxSvccVpi       INTEGER,
+        atmInterfaceConfMinSvccVci          INTEGER,
+        atmInterfaceCurrentMinSvccVci       INTEGER,
+        atmIntfSigVccRxTrafficDescrIndex
+                                   AtmTrafficDescrParamIndex,
+        atmIntfSigVccTxTrafficDescrIndex
+                                   AtmTrafficDescrParamIndex,
+        atmIntfPvcFailures                  Counter32,
+        atmIntfCurrentlyFailingPVpls        Gauge32,
+        atmIntfCurrentlyFailingPVcls        Gauge32,
+        atmIntfPvcFailuresTrapEnable        TruthValue,
+        atmIntfPvcNotificationInterval      INTEGER,
+        atmIntfLeafSetupFailures            Counter32,
+        atmIntfLeafSetupRequests            Counter32 }
+
+atmIntfConfigType     OBJECT-TYPE
+    SYNTAX       AtmInterfaceType
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The type of connection setup procedures configured for the ATM
+       interface.  Setting this variable to a value of 'other' is not
+       allowed."
+    DEFVAL { autoConfig }
+    ::= { atmInterfaceExtEntry 1 }
+
+atmIntfActualType     OBJECT-TYPE
+    SYNTAX       AtmInterfaceType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The type of connection setup procedures currently being used on
+       the interface.  This may reflect a manually configured value for
+       the interface type, or may be determined by other means such as
+       auto-configuration.  A value of `autoConfig' indicates that
+       auto-configuration was requested but has not yet been completed."
+    ::= { atmInterfaceExtEntry 2 }
+
+atmIntfConfigSide     OBJECT-TYPE
+    SYNTAX       INTEGER  {
+
+                     other(1),
+                     user(2),
+                     network(3) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The configured role of the managed entity as one side of the ATM
+       interface.  This value does not apply when the object
+       atmIntfConfigType is set to `autoConfig', `atmfPnni1Dot0', or
+       `atmfBici2Dot0'."
+    ::= { atmInterfaceExtEntry 3 }
+
+atmIntfActualSide     OBJECT-TYPE
+    SYNTAX       INTEGER  {
+                     other(1),
+                     user(2),
+                     network(3),
+                     symmetric(4) }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The current role used by the managed entity to represent one
+       side of the ATM interface."
+    ::= { atmInterfaceExtEntry 4 }
+
+atmIntfIlmiAdminStatus    OBJECT-TYPE
+    SYNTAX       BITS { ilmi(0),
+                        ilmiAddressRegistration(1),
+                        ilmiConnectivity(2),
+                        ilmiPvcPvpMgmt(3),
+                        ilmiSigVccParamNegotiation(4) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "Indicates which components of ILMI are administratively enabled
+       on this interface.  If the 'ilmi' bit is not set, then no ILMI
+       components are operational.  ILMI components other than auto-
+       configuration that are not represented in the value have their
+       administrative status determined according to the 'ilmi' bit.
+       The ILMI auto-configuration component is enabled/disabled by the
+       atmIntfConfigType object."
+    ::= { atmInterfaceExtEntry 5 }
+
+atmIntfIlmiOperStatus    OBJECT-TYPE
+    SYNTAX       BITS { ilmi(0),
+                        ilmiAddressRegistration(1),
+                        ilmiConnectivity(2),
+                        ilmiPvcPvpMgmt(3),
+                        ilmiSigVccParamNegotiation(4) }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Indicates which components of ILMI are operational on this
+       interface."
+    ::= { atmInterfaceExtEntry 6 }
+
+atmIntfIlmiFsmState    OBJECT-TYPE
+    SYNTAX       INTEGER { stopped(1),
+                           linkFailing(2),
+                           establishing(3),
+                           configuring(4),
+                           retrievingNetworkPrefixes(5),
+                           registeringNetworkPrefixes(6),
+                           retrievingAddresses(7),
+                           registeringAddresses(8),
+                           verifying(9) }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Indicates the state of the ILMI Finite State Machine associated
+       with this interface."
+        REFERENCE
+            "ATM Forum, Integrated Local Management Interface
+             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+             September 1996, Appendix 1"
+    ::= { atmInterfaceExtEntry 7 }
+
+atmIntfIlmiEstablishConPollIntvl    OBJECT-TYPE
+    SYNTAX       Integer32 (1..65535)
+    UNITS        "seconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The amount of time S between successive transmissions of ILMI
+       messages on this interface for the purpose of detecting
+       establishment of ILMI connectivity."
+    REFERENCE
+       "ATM Forum, Integrated Local Management Interface
+        (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+        September 1996, Section 8.3.1"
+    DEFVAL { 1 }
+    ::= { atmInterfaceExtEntry 8 }
+
+atmIntfIlmiCheckConPollIntvl    OBJECT-TYPE
+    SYNTAX       Integer32 (0..65535)
+    UNITS        "seconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The amount of time T between successive transmissions of ILMI
+       messages on this interface for the purpose of detecting loss of
+       ILMI connectivity.  The distinguished value zero disables ILMI
+       connectivity procedures on this interface."
+    REFERENCE
+       "ATM Forum, Integrated Local Management Interface
+        (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+        September 1996, Section 8.3.1"
+    DEFVAL { 5 }
+    ::= { atmInterfaceExtEntry 9 }
+
+atmIntfIlmiConPollInactFactor    OBJECT-TYPE
+    SYNTAX       Integer32 (0..65535)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The number K of consecutive polls on this interface for which no
+       ILMI response message is received before ILMI connectivity is
+       declared lost."
+    REFERENCE
+       "ATM Forum, Integrated Local Management Interface
+        (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
+        September 1996, Section 8.3.1"
+    DEFVAL { 4 }
+    ::= { atmInterfaceExtEntry 10 }
+
+atmIntfIlmiPublicPrivateIndctr    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                           other(1),
+                           public(2),
+                           private(3)
+                           }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "Specifies whether this end of the interface is advertised in
+       ILMI as a device of the `public' or `private' type."
+    DEFVAL { private }
+    ::= { atmInterfaceExtEntry 11 }
+
+atmInterfaceConfMaxSvpcVpi    OBJECT-TYPE
+    SYNTAX       INTEGER  (0..4095)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The maximum VPI that the signalling stack on the ATM interface
+       is configured to support for allocation to switched virtual path
+       connections."
+    ::= { atmInterfaceExtEntry 12 }
+
+atmInterfaceCurrentMaxSvpcVpi    OBJECT-TYPE
+    SYNTAX       INTEGER  (0..4095)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The maximum VPI that the signalling stack on the ATM interface
+       may currently allocate to switched virtual path connections.
+       This value is the minimum of atmInterfaceConfMaxSvpcVpi, and the
+       atmInterfaceMaxSvpcVpi of the interface's UNI/NNI peer.
+
+       If the interface does not negotiate with its peer to determine
+       the maximum VPI that can be allocated to SVPCs on the interface,
+       then the value of this object must equal
+       atmInterfaceConfMaxSvpcVpi. "
+    ::= { atmInterfaceExtEntry 13 }
+
+atmInterfaceConfMaxSvccVpi    OBJECT-TYPE
+    SYNTAX       INTEGER  (0..4095)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The maximum VPI that the signalling stack on the ATM interface
+       is configured to support for allocation to switched virtual
+       channel connections."
+    ::= { atmInterfaceExtEntry 14 }
+
+atmInterfaceCurrentMaxSvccVpi    OBJECT-TYPE
+    SYNTAX       INTEGER  (0..4095)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The maximum VPI that the signalling stack on the ATM interface
+       may currently allocate to switched virtual channel connections.
+       This value is the minimum of atmInterfaceConfMaxSvccVpi, and the
+       atmInterfaceConfMaxSvccVpi of the interface's UNI/NNI peer.
+
+       If the interface does not negotiate with its peer to determine
+       the maximum VPI that can be allocated to SVCCs on the interface,
+       then the value of this object must equal
+       atmInterfaceConfMaxSvccVpi."
+    ::= { atmInterfaceExtEntry 15 }
+
+atmInterfaceConfMinSvccVci    OBJECT-TYPE
+    SYNTAX       INTEGER  (0..65535)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The minimum VCI that the signalling stack on the ATM interface
+       is configured to support for allocation to switched virtual
+       channel connections."
+    ::= { atmInterfaceExtEntry 16 }
+
+atmInterfaceCurrentMinSvccVci    OBJECT-TYPE
+    SYNTAX       INTEGER  (0..65535)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The minimum VCI that the signalling stack on the ATM interface
+       may currently allocate to switched virtual channel connections.
+       This value is the maximum of atmInterfaceConfMinSvccVci, and the
+       atmInterfaceConfMinSvccVci of the interface's UNI/NNI peer.
+       If the interface does not negotiate with its peer to determine
+       the minimum VCI that can be allocated to SVCCs on the interface,
+       then the value of this object must equal
+       atmInterfaceConfMinSvccVci."
+    ::= { atmInterfaceExtEntry 17 }
+
+atmIntfSigVccRxTrafficDescrIndex    OBJECT-TYPE
+    SYNTAX       AtmTrafficDescrParamIndex
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object identifies the row in the atmTrafficDescrParamTable
+       used during ILMI auto-configuration to specify the advertised
+       signalling VCC traffic parameters for the receive direction.
+       The traffic descriptor resulting from ILMI auto-configuration of
+       the signalling VCC is indicated in the atmVclTable."
+    ::= { atmInterfaceExtEntry 18 }
+
+atmIntfSigVccTxTrafficDescrIndex    OBJECT-TYPE
+    SYNTAX       AtmTrafficDescrParamIndex
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "This object identifies the row in the atmTrafficDescrParamTable
+       used during ILMI auto-configuration to specify the advertised
+       signalling VCC traffic parameters for the transmit direction.
+       The traffic descriptor resulting from ILMI auto-configuration of
+       the signalling VCC is indicated in the atmVclTable."
+    ::= { atmInterfaceExtEntry 19 }
+
+atmIntfPvcFailures    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of times the operational status of a PVPL or PVCL on
+       this interface has gone down."
+    ::= { atmInterfaceExtEntry 20 }
+
+atmIntfCurrentlyFailingPVpls    OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The current number of VPLs on this interface for which there is
+       an active row in the atmVplTable having an atmVplConnKind value
+       of `pvc' and an atmVplOperStatus with a value other than `up'."
+    ::= { atmInterfaceExtEntry 21 }
+
+atmIntfCurrentlyFailingPVcls    OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The current number of VCLs on this interface for which there is
+       an active row in the atmVclTable having an atmVclConnKind value
+       of `pvc' and an atmVclOperStatus with a value other than `up'."
+    ::= { atmInterfaceExtEntry 22 }
+
+atmIntfPvcFailuresTrapEnable    OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "Allows the generation of traps in response to PVCL or PVPL
+       failures on this interface."
+    DEFVAL { false }
+    ::= { atmInterfaceExtEntry 23 }
+
+atmIntfPvcNotificationInterval    OBJECT-TYPE
+    SYNTAX       INTEGER (1..3600)
+    UNITS        "seconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+       "The minimum interval between the sending of
+       atmIntfPvcFailuresTrap notifications for this interface."
+    DEFVAL { 30 }
+    ::= { atmInterfaceExtEntry 24 }
+
+atmIntfLeafSetupFailures    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of setup failures.  For root, this is the number of
+       rejected setup requests and for leaf, this is the number of setup
+       failure received."
+    ::= { atmInterfaceExtEntry 25 }
+
+atmIntfLeafSetupRequests    OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "Number of setup requests.  For root, this includes both incoming
+       setup request and root intiated setup requests."
+    ::= { atmInterfaceExtEntry 26 }
+
+  -- 15. ATM ILMI Service Registry Table
+
+atmIlmiSrvcRegTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmIlmiSrvcRegEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains a list of all the ATM network services known
+       by this device.
+
+       The characteristics of these services are made available through
+       the ILMI, using the ILMI general-purpose service registry MIB.
+       These services may be made available to all ATM interfaces
+       (atmIlmiSrvcRegIndex = 0) or to some specific ATM interfaces only
+       (atmIlmiSrvcRegIndex = ATM interface index)."
+    ::= { atm2MIBObjects 15 }
+
+atmIlmiSrvcRegEntry OBJECT-TYPE
+    SYNTAX       AtmIlmiSrvcRegEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Information about a single service provider that is available to
+       the user-side of an adjacent device through the ILMI.
+
+       Implementors need to be aware that if the size of the
+       atmIlmiSrvcRegServiceID exceeds 112 sub-identifiers then OIDs of
+
+       column instances in this table will have more than 128 sub-
+       identifiers and cannot be accessed using SNMPv1, SNMPv2, or
+       SNMPv3."
+    INDEX { atmIlmiSrvcRegIndex,
+            atmIlmiSrvcRegServiceID,
+            atmIlmiSrvcRegAddressIndex }
+    ::= { atmIlmiSrvcRegTable 1 }
+
+AtmIlmiSrvcRegEntry ::= SEQUENCE {
+           atmIlmiSrvcRegIndex             InterfaceIndexOrZero,
+           atmIlmiSrvcRegServiceID         OBJECT IDENTIFIER,
+           atmIlmiSrvcRegAddressIndex      INTEGER,
+           atmIlmiSrvcRegATMAddress        AtmAddr,
+           atmIlmiSrvcRegParm1             OCTET STRING,
+           atmIlmiSrvcRegRowStatus         RowStatus
+           }
+
+atmIlmiSrvcRegIndex OBJECT-TYPE
+    SYNTAX       InterfaceIndexOrZero
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The ATM interface where the service defined in this entry can be
+       made available to an ATM device attached to this interface.
+
+       The value of 0 has a special meaning: when an ATM service is
+       defined in an entry whose atmIlmiSrvcRegIndex is zero, the ATM
+       service is available to ATM devices connected to any ATM
+       interface.  (default value(s)).
+
+       When the user-side of an adjacent device queries the content of
+       the ILMI service registry MIB (using the ILMI protocol), the
+       local network-side responds with the ATM services defined in
+       atmIlmiSrvcRegTable entries, provided that these entries are
+       indexed by:
+
+       - the corresponding ifIndex value (atmIlmiSrvcRegIndex
+         equal to the ifIndex of the interface to which the
+         adjacent device is connected) - zero (atmIlmiSrvcRegIndex=0)."
+    ::= { atmIlmiSrvcRegEntry 1 }
+
+atmIlmiSrvcRegServiceID OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This is the service identifier which uniquely identifies the
+
+       type of service at the address provided in the table.  The object
+       identifiers for the LAN Emulation Configuration Server (LECS) and
+       the ATM Name Server (ANS) are defined in the ATM Forum ILMI
+       Service Registry MIB.  The object identifiers for the ATMARP
+       Server, the Multicast Address Resolution Server (MARS), and the
+       NHRP Server (NHS) are defined in RFC 2601, RFC 2602, and RFC
+       2603, respectively."
+    ::= { atmIlmiSrvcRegEntry 2 }
+
+atmIlmiSrvcRegAddressIndex OBJECT-TYPE
+    SYNTAX       INTEGER (1..2147483647)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An arbitrary integer to differentiate multiple rows containing
+       different ATM addresses for the same service on the same
+       interface.  This number need NOT be the same as the corresponding
+       ILMI atmfSrvcRegAddressIndex MIB object."
+    ::= { atmIlmiSrvcRegEntry 3 }
+
+atmIlmiSrvcRegATMAddress OBJECT-TYPE
+    SYNTAX       AtmAddr
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This is the full address of the service.  The user-side of the
+       adjacent device may use this address to establish a connection
+       with the service."
+    ::= { atmIlmiSrvcRegEntry 4 }
+
+atmIlmiSrvcRegParm1 OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE(1..255))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "An octet string used according to the value of
+       atmIlmiSrvcRegServiceID."
+    ::= { atmIlmiSrvcRegEntry 5 }
+
+atmIlmiSrvcRegRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This object is used to create or destroy an entry from this
+       table."
+    ::= { atmIlmiSrvcRegEntry 6 }
+
+  -- 16. ILMI Network Prefix Table
+
+atmIlmiNetworkPrefixTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmIlmiNetworkPrefixEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "A table specifying per-interface network prefix(es) supplied by
+       the network side of the UNI during ILMI address registration.
+       When no network prefixes are specified for a particular
+       interface, one or more network prefixes based on the switch
+       address(es) may be used for ILMI address registration."
+    ::= { atm2MIBObjects 16 }
+
+atmIlmiNetworkPrefixEntry OBJECT-TYPE
+    SYNTAX       AtmIlmiNetworkPrefixEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Information about a single network prefix supplied by the
+       network side of the UNI during ILMI address registration.  Note
+       that the index variable atmIlmiNetPrefixPrefix is a variable-
+       length string, and as such the rule for variable-length strings
+       in section 7.7 of RFC 2578 applies."
+    INDEX   { ifIndex,
+              atmIlmiNetPrefixPrefix }
+    ::= { atmIlmiNetworkPrefixTable 1 }
+
+AtmIlmiNetworkPrefixEntry ::=
+    SEQUENCE {
+           atmIlmiNetPrefixPrefix       AtmIlmiNetworkPrefix,
+           atmIlmiNetPrefixRowStatus    RowStatus
+    }
+
+atmIlmiNetPrefixPrefix    OBJECT-TYPE
+    SYNTAX       AtmIlmiNetworkPrefix
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The network prefix specified for use in ILMI address
+       registration."
+    ::= { atmIlmiNetworkPrefixEntry 1 }
+
+atmIlmiNetPrefixRowStatus    OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "Used to create, delete, activate and de-activate network
+       prefixes used in ILMI address registration."
+    ::= { atmIlmiNetworkPrefixEntry 2 }
+
+  -- 17. ATM Switch Address Table
+
+atmSwitchAddressTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmSwitchAddressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains one or more ATM endsystem addresses on a
+       per-switch basis.  These addresses are used to identify the
+       switch.  When no ILMI network prefixes are configured for certain
+       interfaces, network prefixes based on the switch address(es) may
+       be used for ILMI address registration."
+    ::= { atm2MIBObjects 17 }
+
+atmSwitchAddressEntry    OBJECT-TYPE
+    SYNTAX       AtmSwitchAddressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the ATM Switch Address table."
+    INDEX { atmSwitchAddressIndex }
+    ::= { atmSwitchAddressTable 1 }
+
+AtmSwitchAddressEntry ::=
+    SEQUENCE {
+               atmSwitchAddressIndex           Integer32,
+               atmSwitchAddressAddress         OCTET STRING,
+               atmSwitchAddressRowStatus       RowStatus
+    }
+
+atmSwitchAddressIndex   OBJECT-TYPE
+    SYNTAX       Integer32 (1..65535)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An arbitrary index used to enumerate the ATM endsystem addresses
+       for this switch."
+    ::= { atmSwitchAddressEntry 1 }
+
+atmSwitchAddressAddress   OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE(13|20))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "An ATM endsystem address or address prefix used to identify this
+       switch.  When no ESI or SEL field is specified, the switch may
+       generate the ESI and SEL fields automatically to obtain a
+       complete 20-byte ATM endsystem address."
+    ::= { atmSwitchAddressEntry 2 }
+
+atmSwitchAddressRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "Used to create, delete, activate, and de-activate addresses used
+       to identify this switch."
+    ::= { atmSwitchAddressEntry 3 }
+
+  -- 18. ATM VP Cross-Connect Extension Table
+
+atmVpCrossConnectXTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmVpCrossConnectXEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains one row per VP Cross-Connect represented in
+       the atmVpCrossConnectTable."
+    ::= { atm2MIBObjects 18 }
+
+atmVpCrossConnectXEntry       OBJECT-TYPE
+    SYNTAX       AtmVpCrossConnectXEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Information about a particular ATM VP Cross-Connect.
+       Each entry provides an two objects that name the Cross-Connect.
+       One is assigned by the Service User and the other by the Service
+       Provider."
+    AUGMENTS     { atmVpCrossConnectEntry }
+    ::= { atmVpCrossConnectXTable 1 }
+
+AtmVpCrossConnectXEntry ::= SEQUENCE {
+      atmVpCrossConnectUserName       SnmpAdminString,
+      atmVpCrossConnectProviderName   SnmpAdminString
+}
+
+atmVpCrossConnectUserName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..255))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This is a service user assigned textual representation of a VPC
+       PVC."
+    ::= { atmVpCrossConnectXEntry 1 }
+
+atmVpCrossConnectProviderName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This is a system supplied textual representation of VPC PVC.  It
+       is assigned by the service provider."
+    ::= { atmVpCrossConnectXEntry 2 }
+
+  -- 19. ATM VC Cross-Connect Extension Table
+
+atmVcCrossConnectXTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmVcCrossConnectXEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains one row per VC Cross-Connect represented in
+       the atmVcCrossConnectTable."
+    ::= { atm2MIBObjects 19 }
+
+atmVcCrossConnectXEntry       OBJECT-TYPE
+    SYNTAX       AtmVcCrossConnectXEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Information about a particular ATM VC Cross-Connect.
+       Each entry provides an two objects that name the Cross-Connect.
+       One is assigned by the Service User and the other by the Service
+       Provider."
+    AUGMENTS   { atmVcCrossConnectEntry }
+    ::= { atmVcCrossConnectXTable 1 }
+
+AtmVcCrossConnectXEntry ::= SEQUENCE {
+      atmVcCrossConnectUserName       SnmpAdminString,
+      atmVcCrossConnectProviderName   SnmpAdminString
+}
+
+atmVcCrossConnectUserName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..255))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This is a service user assigned textual representation of a VCC
+
+       PVC."
+    ::= { atmVcCrossConnectXEntry 1 }
+
+atmVcCrossConnectProviderName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This is a system supplied textual representation of VCC PVC.  It
+       is assigned by the service provider."
+    ::= { atmVcCrossConnectXEntry 2 }
+
+  -- 20. Currently Failing PVPL Table
+
+atmCurrentlyFailingPVplTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmCurrentlyFailingPVplEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "A table indicating all VPLs for which there is an active row in
+       the atmVplTable having an atmVplConnKind value of `pvc' and an
+       atmVplOperStatus with a value other than `up'."
+    ::= { atm2MIBObjects 20 }
+
+atmCurrentlyFailingPVplEntry    OBJECT-TYPE
+    SYNTAX       AtmCurrentlyFailingPVplEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Each entry in this table represents a VPL for which the
+       atmVplRowStatus is `active', the atmVplConnKind is `pvc', and the
+       atmVplOperStatus is other than `up'."
+    INDEX   { ifIndex, atmVplVpi }
+    ::= { atmCurrentlyFailingPVplTable 1 }
+
+AtmCurrentlyFailingPVplEntry ::=
+    SEQUENCE {
+               atmCurrentlyFailingPVplTimeStamp    TimeStamp
+    }
+
+atmCurrentlyFailingPVplTimeStamp    OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The time at which this PVPL began to fail."
+    ::= { atmCurrentlyFailingPVplEntry 1 }
+
+  -- 21. Currently Failing PVCL Table
+
+atmCurrentlyFailingPVclTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF AtmCurrentlyFailingPVclEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "A table indicating all VCLs for which there is an active row in
+       the atmVclTable having an atmVclConnKind value of `pvc' and an
+       atmVclOperStatus with a value other than `up'."
+    ::= { atm2MIBObjects 21 }
+
+atmCurrentlyFailingPVclEntry    OBJECT-TYPE
+    SYNTAX       AtmCurrentlyFailingPVclEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Each entry in this table represents a VCL for which the
+       atmVclRowStatus is `active', the atmVclConnKind is `pvc', and the
+       atmVclOperStatus is other than `up'."
+    INDEX        { ifIndex, atmVclVpi, atmVclVci }
+    ::= { atmCurrentlyFailingPVclTable 1 }
+
+AtmCurrentlyFailingPVclEntry ::=
+    SEQUENCE {
+               atmCurrentlyFailingPVclTimeStamp    TimeStamp
+    }
+
+atmCurrentlyFailingPVclTimeStamp    OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The time at which this PVCL began to fail."
+    ::= { atmCurrentlyFailingPVclEntry 1 }
+
+  -- ATM PVC Traps
+
+  atmPvcTraps    OBJECT IDENTIFIER ::= { atm2MIBTraps 1 }
+
+  atmPvcTrapsPrefix    OBJECT IDENTIFIER ::= { atmPvcTraps 0 }
+
+  atmIntfPvcFailuresTrap    NOTIFICATION-TYPE
+    OBJECTS      { ifIndex, atmIntfPvcFailures,
+                   atmIntfCurrentlyFailingPVpls,
+                   atmIntfCurrentlyFailingPVcls }
+    STATUS       current
+    DESCRIPTION
+       "A notification indicating that one or more PVPLs or PVCLs on
+       this interface has failed since the last atmPvcFailuresTrap was
+       sent.  If this trap has not been sent for the last
+       atmIntfPvcNotificationInterval, then it will be sent on the next
+       increment of atmIntfPvcFailures."
+    ::= { atmPvcTrapsPrefix 1 }
+
+  -- Conformance Information
+
+atm2MIBConformance   OBJECT IDENTIFIER ::= {atm2MIB 3}
+
+atm2MIBGroups        OBJECT IDENTIFIER ::= {atm2MIBConformance 1}
+
+atm2MIBCompliances   OBJECT IDENTIFIER ::= {atm2MIBConformance 2}
+
+  -- Compliance Statements
+
+atm2MIBCompliance   MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which represent ATM
+         interfaces.  The compliance statements are used to determine
+         if a particular group or object applies to hosts,
+         networks/switches, or both.  The Common group is defined as
+         applicable to all three."
+
+    MODULE  -- this module
+    MANDATORY-GROUPS  { atmCommonGroup }
+
+  -- Objects in the ATM Switch/Service/Host Group
+
+    GROUP       atmCommonStatsGroup
+    DESCRIPTION
+        "This group is mandatory for systems that are supporting
+         per-VPC or per-VCC counters."
+
+    OBJECT       atmVplLogicalPortDef
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "This object is mandatory for systems support ATM Logical
+         Port interfaces."
+
+    OBJECT       atmIntfSigVccRxTrafficDescrIndex
+    DESCRIPTION
+        "This object is mandatory for systems that support negotiation
+         of signalling VCC traffic parameters through ILMI."
+
+    OBJECT       atmIntfSigVccTxTrafficDescrIndex
+    DESCRIPTION
+        "This object is mandatory for systems that support negotiation
+         of signalling VCC traffic parameters through ILMI."
+
+    OBJECT       atmCurrentlyFailingPVplTimeStamp
+    DESCRIPTION
+        "This object is optional."
+
+    OBJECT       atmCurrentlyFailingPVclTimeStamp
+    DESCRIPTION
+        "This object is optional."
+
+    OBJECT       atmIntfLeafSetupFailures
+    DESCRIPTION
+        "This object is optional."
+
+    OBJECT       atmIntfLeafSetupRequests
+    DESCRIPTION
+        "This object is optional."
+
+  -- Objects in the ATM Switch/Service Group
+
+    GROUP        atmSwitchServcGroup
+    DESCRIPTION
+        "This group is mandatory for a Switch/Service that implements
+         ATM interfaces."
+
+    OBJECT       atmIfRegAddrRowStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the six
+         enumerated values for the RowStatus textual convention need
+         be supported, specifically: active(1)."
+
+    OBJECT       atmSvcVpCrossConnectRowStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the six
+         enumerated values for the RowStatus textual convention need
+         be supported, specifically: active(1)"
+
+    OBJECT       atmSvcVcCrossConnectRowStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the six
+         enumerated values for the RowStatus textual convention need
+         be supported, specifically: active(1)"
+
+  -- Objects in the ATM Switch/Service Signalling Group
+
+    GROUP       atmSwitchServcSigGroup
+    DESCRIPTION
+        "This group's write access is not required."
+
+  -- Objects in the ATM Switch/Service Notifications Group
+
+    GROUP        atmSwitchServcNotifGroup
+    DESCRIPTION
+        "This group is optional for systems implementing support for
+         an ATM Switch or an ATM Network Service."
+
+  -- Objects in the ATM Switch Group
+
+    GROUP        atmSwitchGroup
+    DESCRIPTION
+        "This group is optional for a switch that implements ATM
+         interfaces."
+
+  -- Objects in the ATM Service Group
+
+    GROUP        atmServcGroup
+    DESCRIPTION
+        "This group is mandatory for systems implementing support for
+         an ATM Network Service."
+
+  -- Objects in the ATM Host Group
+
+    GROUP        atmHostGroup
+    DESCRIPTION
+        "This group is mandatory for a Host that implements ATM
+         interfaces."
+
+    OBJECT       atmVclAddrType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT       atmVclAddrRowStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the six
+         enumerated values for the RowStatus textual convention need
+         be supported, specifically:  active(1)."
+
+  -- ATM Host Sig Descriptor Parameter Group
+
+    GROUP        atmHostSigDescrGroup
+    DESCRIPTION
+        "This group is mandatory for a Host that implements ATM
+         interfaces.  Write access is not required for this group."
+    ::= { atm2MIBCompliances 1 }
+
+  -- **********************************************
+
+  -- Units of Conformance
+  -- Mandatory for ATM hosts and switch/service providers
+
+atmCommonGroup     OBJECT-GROUP
+
+OBJECTS {
+    atmSigSSCOPConEvents,
+    atmSigSSCOPErrdPdus,
+    atmSigDetectSetupAttempts,
+    atmSigEmitSetupAttempts,
+    atmSigDetectUnavailRoutes,
+    atmSigEmitUnavailRoutes,
+    atmSigDetectUnavailResrcs,
+    atmSigEmitUnavailResrcs,
+    atmSigDetectCldPtyEvents,
+    atmSigEmitCldPtyEvents,
+    atmSigDetectMsgErrors,
+    atmSigEmitMsgErrors,
+    atmSigDetectClgPtyEvents,
+    atmSigEmitClgPtyEvents,
+    atmSigDetectTimerExpireds,
+    atmSigEmitTimerExpireds,
+    atmSigDetectRestarts,
+    atmSigEmitRestarts,
+    atmSigInEstabls,
+    atmSigOutEstabls,
+    atmVplLogicalPortDef,
+    atmVplLogicalPortIndex,
+    atmInterfaceConfMaxSvpcVpi,
+    atmInterfaceCurrentMaxSvpcVpi,
+    atmInterfaceConfMaxSvccVpi,
+    atmInterfaceCurrentMaxSvccVpi,
+    atmInterfaceConfMinSvccVci,
+    atmInterfaceCurrentMinSvccVci,
+    atmIntfSigVccRxTrafficDescrIndex,
+    atmIntfSigVccTxTrafficDescrIndex,
+    atmIntfPvcFailures,
+    atmIntfCurrentlyFailingPVpls,
+    atmIntfCurrentlyFailingPVcls,
+    atmIntfPvcNotificationInterval,
+    atmIntfPvcFailuresTrapEnable,
+    atmIntfLeafSetupFailures,
+    atmIntfLeafSetupRequests,
+    atmIntfConfigType,
+    atmIntfActualType,
+    atmIntfConfigSide,
+    atmIntfActualSide,
+    atmIntfIlmiAdminStatus,
+    atmIntfIlmiOperStatus,
+    atmIntfIlmiFsmState,
+    atmIntfIlmiEstablishConPollIntvl,
+    atmIntfIlmiCheckConPollIntvl,
+    atmIntfIlmiConPollInactFactor,
+    atmIntfIlmiPublicPrivateIndctr,
+    atmCurrentlyFailingPVplTimeStamp,
+    atmCurrentlyFailingPVclTimeStamp
+}
+  STATUS       current
+  DESCRIPTION
+    "A collection of objects providing information
+    for a Switch/Service/Host that implements
+    ATM interfaces."
+  ::= { atm2MIBGroups 1 }
+
+atmCommonStatsGroup     OBJECT-GROUP
+
+OBJECTS {
+    atmVclStatTotalCellIns,
+    atmVclStatClp0CellIns,
+    atmVclStatTotalDiscards,
+    atmVclStatClp0Discards,
+    atmVclStatTotalCellOuts,
+    atmVclStatClp0CellOuts,
+    atmVclStatClp0Tagged,
+    atmVplStatTotalCellIns,
+    atmVplStatClp0CellIns,
+    atmVplStatTotalDiscards,
+    atmVplStatClp0Discards,
+    atmVplStatTotalCellOuts,
+    atmVplStatClp0CellOuts,
+    atmVplStatClp0Tagged
+}
+  STATUS       current
+  DESCRIPTION
+    "A collection of objects providing information
+
+    for a Switch/Service/Host that implements
+    ATM VCL and VPL Statistics"
+  ::= { atm2MIBGroups 2 }
+
+  atmSwitchServcGroup     OBJECT-GROUP
+
+  OBJECTS {
+    atmIlmiSrvcRegATMAddress,
+    atmIlmiSrvcRegParm1,
+    atmIlmiSrvcRegRowStatus,
+    atmIlmiNetPrefixRowStatus,
+    atmSvcVpCrossConnectCreationTime,
+    atmSvcVpCrossConnectRowStatus,
+    atmSvcVcCrossConnectCreationTime,
+    atmSvcVcCrossConnectRowStatus,
+    atmIfRegAddrAddressSource,
+    atmIfRegAddrOrgScope,
+    atmIfRegAddrRowStatus}
+  STATUS       current
+  DESCRIPTION
+    "A collection of objects providing information
+    for a Switch/Service that implements ATM interfaces."
+  ::= { atm2MIBGroups 3 }
+
+  atmSwitchServcSigGroup     OBJECT-GROUP
+
+  OBJECTS {
+    atmSigSupportClgPtyNumDel,
+    atmSigSupportClgPtySubAddr,
+    atmSigSupportCldPtySubAddr,
+    atmSigSupportHiLyrInfo,
+    atmSigSupportLoLyrInfo,
+    atmSigSupportBlliRepeatInd,
+    atmSigSupportAALInfo,
+    atmSigSupportPrefCarrier}
+  STATUS       current
+  DESCRIPTION
+    "A collection of objects providing information
+    for a Switch/Service that implements ATM signalling."
+  ::= { atm2MIBGroups 4 }
+
+    atmSwitchServcNotifGroup     NOTIFICATION-GROUP
+
+    NOTIFICATIONS { atmIntfPvcFailuresTrap }
+    STATUS       current
+    DESCRIPTION
+        "A collection of notifications providing information
+        for a Switch/Service that implements ATM interfaces."
+    ::= { atm2MIBGroups 5 }
+
+    atmSwitchGroup     OBJECT-GROUP
+        OBJECTS {
+            atmSwitchAddressAddress,
+            atmSwitchAddressRowStatus }
+        STATUS       current
+        DESCRIPTION
+          "A collection of objects providing information
+          for an ATM switch."
+        ::= { atm2MIBGroups 6 }
+
+    atmServcGroup     OBJECT-GROUP
+
+    OBJECTS {
+        atmVpCrossConnectUserName,
+        atmVpCrossConnectProviderName,
+        atmVcCrossConnectUserName,
+        atmVcCrossConnectProviderName }
+    STATUS       current
+    DESCRIPTION
+        "A collection of objects providing information
+        for an ATM Network Service."
+    ::= { atm2MIBGroups 7 }
+
+    atmHostGroup     OBJECT-GROUP
+
+    OBJECTS {
+        atmAal5VclInPkts,
+        atmAal5VclOutPkts,
+        atmAal5VclInOctets,
+        atmAal5VclOutOctets,
+        atmVclAddrType,
+        atmVclAddrRowStatus,
+        atmAddrVclAddrType,
+        atmVclGenSigDescrIndex}
+    STATUS       current
+    DESCRIPTION
+      "A collection of objects providing information
+      for a Host that implements ATM interfaces."
+    ::= { atm2MIBGroups 8 }
+
+    atmHostSigDescrGroup     OBJECT-GROUP
+
+    OBJECTS {
+           atmSigDescrParamAalType,
+           atmSigDescrParamAalSscsType,
+           atmSigDescrParamBhliType,
+           atmSigDescrParamBhliInfo,
+           atmSigDescrParamBbcConnConf,
+           atmSigDescrParamBlliLayer2,
+           atmSigDescrParamBlliLayer3,
+           atmSigDescrParamBlliPktSize,
+           atmSigDescrParamBlliSnapId,
+           atmSigDescrParamBlliOuiPid,
+           atmSigDescrParamRowStatus}
+    STATUS       current
+    DESCRIPTION
+      "A collection of objects providing information
+      for a Host that implements ATM interfaces."
+    ::= { atm2MIBGroups 9 }
+
+END
diff --git a/snmp_builder/mibs/BGP4-MIB.mib b/snmp_builder/mibs/BGP4-MIB.mib
new file mode 100644
index 0000000..5628263
--- /dev/null
+++ b/snmp_builder/mibs/BGP4-MIB.mib
@@ -0,0 +1,1232 @@
+BGP4-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+        IpAddress, Integer32, Counter32, Gauge32, mib-2
+            FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+            FROM SNMPv2-CONF;
+
+    bgp MODULE-IDENTITY
+        LAST-UPDATED "200601110000Z"
+        ORGANIZATION "IETF IDR Working Group"
+        CONTACT-INFO "E-mail:  idr@ietf.org
+
+                      Jeffrey Haas, Susan Hares  (Editors)
+                      NextHop Technologies
+                      825 Victors Way
+                      Suite 100
+                      Ann Arbor, MI 48108-2738
+                      Tel: +1 734 222-1600
+                      Fax: +1 734 222-1602
+                      E-mail: jhaas@nexthop.com
+                              skh@nexthop.com"
+        DESCRIPTION
+                "The MIB module for the BGP-4 protocol.
+
+                 Copyright (C) The Internet Society (2006).  This
+                 version of this MIB module is part of RFC 4273;
+                 see the RFC itself for full legal notices."
+
+        REVISION "200601110000Z"
+        DESCRIPTION
+               "Changes from RFC 1657:
+
+                1) Fixed the definitions of the notifications
+                   to make them equivalent to their initial
+                   definition in RFC 1269.
+                2) Added compliance and conformance info.
+                3) Updated information for the values of
+                   bgpPeerNegotiatedVersion, bgp4PathAttrLocalPref,
+                   bgp4PathAttrCalcLocalPref,
+                   bgp4PathAttrMultiExitDisc,
+                   bgp4PathAttrASPathSegement.
+                4) Added additional clarification comments where
+                   needed.
+
+                5) Noted where objects do not fully reflect
+                   the protocol as Known Issues.
+                6) Updated the DESCRIPTION for the
+                   bgp4PathAttrAtomicAggregate object.
+                7) The following objects have had their DESCRIPTION
+                   clause modified to remove the text that suggested
+                   (using 'should' verb) initializing the counter
+                   to zero on a transition to the established state:
+                     bgpPeerInUpdates, bgpPeerOutUpdates,
+                     bgpPeerInTotalMessages, bgpPeerOutTotalMessages
+                   Those implementations that still do this are
+                   still compliant with this new wording.
+                   Applications should not assume counters have
+                   started at zero.
+
+                 Published as RFC 4273."
+
+        REVISION "199405050000Z"
+        DESCRIPTION
+                "Translated to SMIv2 and published as RFC 1657."
+
+        REVISION "199110261839Z"
+        DESCRIPTION
+                "Initial version, published as RFC 1269."
+        ::= { mib-2 15 }
+
+    bgpVersion OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE (1..255))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Vector of supported BGP protocol version
+                 numbers.  Each peer negotiates the version
+                 from this vector.  Versions are identified
+                 via the string of bits contained within this
+                 object.  The first octet contains bits 0 to
+                 7, the second octet contains bits 8 to 15,
+                 and so on, with the most significant bit
+                 referring to the lowest bit number in the
+                 octet (e.g., the MSB of the first octet
+                 refers to bit 0).  If a bit, i, is present
+                 and set, then the version (i+1) of the BGP
+                 is supported."
+        REFERENCE
+                "RFC 4271, Section 4.2."
+        ::= { bgp 1 }
+
+    bgpLocalAs OBJECT-TYPE
+        SYNTAX     Integer32 (0..65535)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The local autonomous system number."
+        REFERENCE
+                 "RFC 4271, Section 4.2, 'My Autonomous System'."
+        ::= { bgp 2 }
+
+    -- BGP Peer table.  This table contains, one entry per
+    -- BGP peer, information about the BGP peer.
+
+    bgpPeerTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF BgpPeerEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "BGP peer table.  This table contains,
+                 one entry per BGP peer, information about the
+                 connections with BGP peers."
+        ::= { bgp 3 }
+
+    bgpPeerEntry OBJECT-TYPE
+        SYNTAX     BgpPeerEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Entry containing information about the
+                 connection with a BGP peer."
+        INDEX { bgpPeerRemoteAddr }
+        ::= { bgpPeerTable 1 }
+
+    BgpPeerEntry ::= SEQUENCE {
+            bgpPeerIdentifier
+                IpAddress,
+            bgpPeerState
+                INTEGER,
+            bgpPeerAdminStatus
+                INTEGER,
+            bgpPeerNegotiatedVersion
+                Integer32,
+            bgpPeerLocalAddr
+                IpAddress,
+            bgpPeerLocalPort
+                Integer32,
+            bgpPeerRemoteAddr
+                IpAddress,
+            bgpPeerRemotePort
+
+                Integer32,
+            bgpPeerRemoteAs
+                Integer32,
+            bgpPeerInUpdates
+                Counter32,
+            bgpPeerOutUpdates
+                Counter32,
+            bgpPeerInTotalMessages
+                Counter32,
+            bgpPeerOutTotalMessages
+                Counter32,
+            bgpPeerLastError
+                OCTET STRING,
+            bgpPeerFsmEstablishedTransitions
+                Counter32,
+            bgpPeerFsmEstablishedTime
+                Gauge32,
+            bgpPeerConnectRetryInterval
+                Integer32,
+            bgpPeerHoldTime
+                Integer32,
+            bgpPeerKeepAlive
+                Integer32,
+            bgpPeerHoldTimeConfigured
+                Integer32,
+            bgpPeerKeepAliveConfigured
+                Integer32,
+            bgpPeerMinASOriginationInterval
+                Integer32,
+            bgpPeerMinRouteAdvertisementInterval
+                Integer32,
+            bgpPeerInUpdateElapsedTime
+                Gauge32
+            }
+
+    bgpPeerIdentifier OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The BGP Identifier of this entry's BGP peer.
+                 This entry MUST be 0.0.0.0 unless the
+                 bgpPeerState is in the openconfirm or the
+                 established state."
+        REFERENCE
+                "RFC 4271, Section 4.2, 'BGP Identifier'."
+        ::= { bgpPeerEntry 1 }
+
+    bgpPeerState OBJECT-TYPE
+        SYNTAX     INTEGER {
+                            idle(1),
+                            connect(2),
+                            active(3),
+                            opensent(4),
+                            openconfirm(5),
+                            established(6)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The BGP peer connection state."
+        REFERENCE
+                "RFC 4271, Section 8.2.2."
+        ::= { bgpPeerEntry 2 }
+
+    bgpPeerAdminStatus OBJECT-TYPE
+        SYNTAX     INTEGER {
+                            stop(1),
+                            start(2)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "The desired state of the BGP connection.
+                 A transition from 'stop' to 'start' will cause
+                 the BGP Manual Start Event to be generated.
+                 A transition from 'start' to 'stop' will cause
+                 the BGP Manual Stop Event to be generated.
+                 This parameter can be used to restart BGP peer
+                 connections.  Care should be used in providing
+                 write access to this object without adequate
+                 authentication."
+        REFERENCE
+                "RFC 4271, Section 8.1.2."
+        ::= { bgpPeerEntry 3 }
+
+    bgpPeerNegotiatedVersion OBJECT-TYPE
+        SYNTAX     Integer32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The negotiated version of BGP running between
+                 the two peers.
+
+                 This entry MUST be zero (0) unless the
+                 bgpPeerState is in the openconfirm or the
+
+                 established state.
+
+                 Note that legal values for this object are
+                 between 0 and 255."
+        REFERENCE
+                "RFC 4271, Section 4.2.
+                 RFC 4271, Section 7."
+        ::= { bgpPeerEntry 4 }
+
+    bgpPeerLocalAddr OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The local IP address of this entry's BGP
+                 connection."
+        ::= { bgpPeerEntry 5 }
+
+    bgpPeerLocalPort OBJECT-TYPE
+        SYNTAX     Integer32 (0..65535)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The local port for the TCP connection between
+                 the BGP peers."
+        ::= { bgpPeerEntry 6 }
+
+    bgpPeerRemoteAddr OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The remote IP address of this entry's BGP
+                 peer."
+        ::= { bgpPeerEntry 7 }
+
+    bgpPeerRemotePort OBJECT-TYPE
+        SYNTAX     Integer32 (0..65535)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The remote port for the TCP connection
+                 between the BGP peers.  Note that the
+                 objects bgpPeerLocalAddr,
+                 bgpPeerLocalPort, bgpPeerRemoteAddr, and
+                 bgpPeerRemotePort provide the appropriate
+                 reference to the standard MIB TCP
+                 connection table."
+        ::= { bgpPeerEntry 8 }
+
+    bgpPeerRemoteAs OBJECT-TYPE
+        SYNTAX     Integer32 (0..65535)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The remote autonomous system number received in
+                 the BGP OPEN message."
+        REFERENCE
+                "RFC 4271, Section 4.2."
+        ::= { bgpPeerEntry 9 }
+
+    bgpPeerInUpdates OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of BGP UPDATE messages
+                 received on this connection."
+        REFERENCE
+                "RFC 4271, Section 4.3."
+        ::= { bgpPeerEntry 10 }
+
+    bgpPeerOutUpdates OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of BGP UPDATE messages
+                 transmitted on this connection."
+        REFERENCE
+                "RFC 4271, Section 4.3."
+        ::= { bgpPeerEntry 11 }
+
+    bgpPeerInTotalMessages OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of messages received
+                 from the remote peer on this connection."
+        REFERENCE
+                "RFC 4271, Section 4."
+        ::= { bgpPeerEntry 12 }
+
+    bgpPeerOutTotalMessages OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of messages transmitted to
+                 the remote peer on this connection."
+        REFERENCE
+                "RFC 4271, Section 4."
+        ::= { bgpPeerEntry 13 }
+
+    bgpPeerLastError OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE (2))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The last error code and subcode seen by this
+                 peer on this connection.  If no error has
+                 occurred, this field is zero.  Otherwise, the
+                 first byte of this two byte OCTET STRING
+                 contains the error code, and the second byte
+                 contains the subcode."
+        REFERENCE
+                "RFC 4271, Section 4.5."
+        ::= { bgpPeerEntry 14 }
+
+    bgpPeerFsmEstablishedTransitions OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of times the BGP FSM
+                 transitioned into the established state
+                 for this peer."
+        REFERENCE
+                "RFC 4271, Section 8."
+        ::= { bgpPeerEntry 15 }
+
+    bgpPeerFsmEstablishedTime OBJECT-TYPE
+        SYNTAX     Gauge32
+        UNITS      "seconds"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This timer indicates how long (in
+                 seconds) this peer has been in the
+                 established state or how long
+                 since this peer was last in the
+                 established state.  It is set to zero when
+                 a new peer is configured or when the router is
+
+                 booted."
+        REFERENCE
+                "RFC 4271, Section 8."
+        ::= { bgpPeerEntry 16 }
+
+    bgpPeerConnectRetryInterval OBJECT-TYPE
+        SYNTAX     Integer32 (1..65535)
+        UNITS      "seconds"
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the
+                 ConnectRetry timer.  The suggested value
+                 for this timer is 120 seconds."
+        REFERENCE
+                "RFC 4271, Section 8.2.2.  This is the value used
+                 to initialize the 'ConnectRetryTimer'."
+        ::= { bgpPeerEntry 17 }
+
+    bgpPeerHoldTime OBJECT-TYPE
+        SYNTAX     Integer32  ( 0 | 3..65535 )
+        UNITS      "seconds"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the Hold
+                 Timer established with the peer.  The
+                 value of this object is calculated by this
+                 BGP speaker, using the smaller of the
+                 values in bgpPeerHoldTimeConfigured and the
+                 Hold Time received in the OPEN message.
+
+                 This value must be at least three seconds
+                 if it is not zero (0).
+
+                 If the Hold Timer has not been established
+                 with the peer this object MUST have a value
+                 of zero (0).
+
+                 If the bgpPeerHoldTimeConfigured object has
+                 a value of (0), then this object MUST have a
+                 value of (0)."
+        REFERENCE
+                "RFC 4271, Section 4.2."
+        ::= { bgpPeerEntry 18 }
+
+    bgpPeerKeepAlive OBJECT-TYPE
+        SYNTAX     Integer32 ( 0 | 1..21845 )
+        UNITS      "seconds"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the KeepAlive
+                 timer established with the peer.  The value
+                 of this object is calculated by this BGP
+                 speaker such that, when compared with
+                 bgpPeerHoldTime, it has the same proportion
+                 that bgpPeerKeepAliveConfigured has,
+                 compared with bgpPeerHoldTimeConfigured.
+
+                 If the KeepAlive timer has not been established
+                 with the peer, this object MUST have a value
+                 of zero (0).
+
+                 If the of bgpPeerKeepAliveConfigured object
+                 has a value of (0), then this object MUST have
+                 a value of (0)."
+        REFERENCE
+                "RFC 4271, Section 4.4."
+        ::= { bgpPeerEntry 19 }
+
+    bgpPeerHoldTimeConfigured OBJECT-TYPE
+        SYNTAX     Integer32 ( 0 | 3..65535 )
+        UNITS      "seconds"
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the Hold Time
+                 configured for this BGP speaker with this
+                 peer.  This value is placed in an OPEN
+                 message sent to this peer by this BGP
+                 speaker, and is compared with the Hold
+                 Time field in an OPEN message received
+                 from the peer when determining the Hold
+                 Time (bgpPeerHoldTime) with the peer.
+                 This value must not be less than three
+                 seconds if it is not zero (0).  If it is
+                 zero (0), the Hold Time is NOT to be
+                 established with the peer.  The suggested
+                 value for this timer is 90 seconds."
+        REFERENCE
+                "RFC 4271, Section 4.2.
+                 RFC 4271, Section 10."
+        ::= { bgpPeerEntry 20 }
+
+    bgpPeerKeepAliveConfigured OBJECT-TYPE
+        SYNTAX     Integer32 ( 0 | 1..21845 )
+        UNITS      "seconds"
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the
+                 KeepAlive timer configured for this BGP
+                 speaker with this peer.  The value of this
+                 object will only determine the
+                 KEEPALIVE messages' frequency relative to
+                 the value specified in
+                 bgpPeerHoldTimeConfigured; the actual
+                 time interval for the KEEPALIVE messages is
+                 indicated by bgpPeerKeepAlive.  A
+                 reasonable maximum value for this timer
+                 would be one third of that of
+                 bgpPeerHoldTimeConfigured.
+                 If the value of this object is zero (0),
+                 no periodical KEEPALIVE messages are sent
+                 to the peer after the BGP connection has
+                 been established.  The suggested value for
+                 this timer is 30 seconds."
+        REFERENCE
+                "RFC 4271, Section 4.4.
+                 RFC 4271, Section 10."
+        ::= { bgpPeerEntry 21 }
+
+    bgpPeerMinASOriginationInterval OBJECT-TYPE
+        SYNTAX     Integer32 (1..65535)
+        UNITS      "seconds"
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the
+                 MinASOriginationInterval timer.
+                 The suggested value for this timer is 15
+                 seconds."
+        REFERENCE
+                "RFC 4271, Section 9.2.1.2.
+                 RFC 4271, Section 10."
+        ::= { bgpPeerEntry 22 }
+
+    bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
+        SYNTAX     Integer32 (1..65535)
+        UNITS      "seconds"
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Time interval (in seconds) for the
+                 MinRouteAdvertisementInterval timer.
+                 The suggested value for this timer is 30
+                 seconds for EBGP connections and 5
+                 seconds for IBGP connections."
+        REFERENCE
+                "RFC 4271, Section 9.2.1.1.
+                 RFC 4271, Section 10."
+        ::= { bgpPeerEntry 23 }
+
+    bgpPeerInUpdateElapsedTime OBJECT-TYPE
+        SYNTAX     Gauge32
+        UNITS      "seconds"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Elapsed time (in seconds) since the last BGP
+                 UPDATE message was received from the peer.
+                 Each time bgpPeerInUpdates is incremented,
+                 the value of this object is set to zero (0)."
+        REFERENCE
+                "RFC 4271, Section 4.3.
+                 RFC 4271, Section 8.2.2, Established state."
+        ::= { bgpPeerEntry 24 }
+
+    bgpIdentifier OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The BGP Identifier of the local system."
+        REFERENCE
+                "RFC 4271, Section 4.2."
+        ::= { bgp 4 }
+
+    -- BGP Received Path Attribute Table.  This table contains
+    -- one entry per path to a network, and path attributes
+    -- received from all peers running BGP version 3 or less.
+    -- This table is obsolete, having been replaced in
+    -- functionality by the bgp4PathAttrTable.
+
+    bgpRcvdPathAttrTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF BgpPathAttrEntry
+        MAX-ACCESS not-accessible
+        STATUS     obsolete
+        DESCRIPTION
+                "The BGP Received Path Attribute Table
+                 contains information about paths to
+
+                 destination networks, received from all
+                 peers running BGP version 3 or less."
+        ::= { bgp 5 }
+
+    bgpPathAttrEntry OBJECT-TYPE
+        SYNTAX     BgpPathAttrEntry
+        MAX-ACCESS not-accessible
+        STATUS     obsolete
+        DESCRIPTION
+                "Information about a path to a network."
+        INDEX { bgpPathAttrDestNetwork,
+                bgpPathAttrPeer        }
+        ::= { bgpRcvdPathAttrTable 1 }
+
+    BgpPathAttrEntry ::= SEQUENCE {
+        bgpPathAttrPeer
+             IpAddress,
+        bgpPathAttrDestNetwork
+             IpAddress,
+        bgpPathAttrOrigin
+             INTEGER,
+        bgpPathAttrASPath
+             OCTET STRING,
+        bgpPathAttrNextHop
+             IpAddress,
+        bgpPathAttrInterASMetric
+             Integer32
+    }
+
+    bgpPathAttrPeer OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     obsolete
+        DESCRIPTION
+                "The IP address of the peer where the path
+                 information was learned."
+        ::= { bgpPathAttrEntry 1 }
+
+    bgpPathAttrDestNetwork OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     obsolete
+        DESCRIPTION
+                "The address of the destination network."
+        REFERENCE
+                "RFC 1267, Section 4.3."
+        ::= { bgpPathAttrEntry 2 }
+
+    bgpPathAttrOrigin OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       igp(1),-- networks are interior
+                       egp(2),-- networks learned via the
+                              -- EGP protocol
+                       incomplete(3) -- networks that
+                              -- are learned by some other
+                              -- means
+                   }
+        MAX-ACCESS read-only
+        STATUS     obsolete
+        DESCRIPTION
+                "The ultimate origin of the path information."
+        REFERENCE
+                "RFC 1267, Section 4.3.
+                 RFC 1267, Section 5."
+        ::= { bgpPathAttrEntry 3 }
+
+    bgpPathAttrASPath OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE (2..255))
+        MAX-ACCESS read-only
+        STATUS     obsolete
+        DESCRIPTION
+                "The set of ASes that must be traversed to reach
+                 the network.  This object is probably best
+                 represented as SEQUENCE OF INTEGER.  For SMI
+                 compatibility, though, it is represented as
+                 OCTET STRING.  Each AS is represented as a pair
+                 of octets according to the following algorithm:
+
+                    first-byte-of-pair = ASNumber / 256;
+                    second-byte-of-pair = ASNumber & 255;"
+        REFERENCE
+                "RFC 1267, Section 4.3.
+                 RFC 1267, Section 5."
+        ::= { bgpPathAttrEntry 4 }
+
+    bgpPathAttrNextHop OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     obsolete
+        DESCRIPTION
+                "The address of the border router that should
+                 be used for the destination network."
+        REFERENCE
+                "RFC 1267, Section 4.3.
+                 RFC 1267, Section 5."
+        ::= { bgpPathAttrEntry 5 }
+
+    bgpPathAttrInterASMetric OBJECT-TYPE
+        SYNTAX     Integer32
+        MAX-ACCESS read-only
+        STATUS     obsolete
+        DESCRIPTION
+                "The optional inter-AS metric.  If this
+                 attribute has not been provided for this route,
+                 the value for this object is 0."
+        REFERENCE
+                "RFC 1267, Section 4.3.
+                 RFC 1267, Section 5."
+        ::= { bgpPathAttrEntry 6 }
+
+    -- BGP-4 Received Path Attribute Table.  This table
+    -- contains one entry per path to a network, and path
+    -- attributes received from all peers running BGP-4.
+
+    bgp4PathAttrTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF Bgp4PathAttrEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "The BGP-4 Received Path Attribute Table
+                 contains information about paths to
+                 destination networks, received from all
+                 BGP4 peers."
+        ::= { bgp 6 }
+
+    bgp4PathAttrEntry OBJECT-TYPE
+        SYNTAX     Bgp4PathAttrEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Information about a path to a network."
+        INDEX { bgp4PathAttrIpAddrPrefix,
+                bgp4PathAttrIpAddrPrefixLen,
+                bgp4PathAttrPeer            }
+        ::= { bgp4PathAttrTable 1 }
+
+    Bgp4PathAttrEntry ::= SEQUENCE {
+        bgp4PathAttrPeer
+             IpAddress,
+        bgp4PathAttrIpAddrPrefixLen
+             Integer32,
+        bgp4PathAttrIpAddrPrefix
+             IpAddress,
+        bgp4PathAttrOrigin
+             INTEGER,
+        bgp4PathAttrASPathSegment
+             OCTET STRING,
+        bgp4PathAttrNextHop
+             IpAddress,
+        bgp4PathAttrMultiExitDisc
+             Integer32,
+        bgp4PathAttrLocalPref
+             Integer32,
+        bgp4PathAttrAtomicAggregate
+             INTEGER,
+        bgp4PathAttrAggregatorAS
+             Integer32,
+        bgp4PathAttrAggregatorAddr
+             IpAddress,
+        bgp4PathAttrCalcLocalPref
+             Integer32,
+        bgp4PathAttrBest
+             INTEGER,
+        bgp4PathAttrUnknown
+             OCTET STRING
+    }
+
+    bgp4PathAttrPeer OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The IP address of the peer where the path
+                 information was learned."
+        ::= { bgp4PathAttrEntry 1 }
+
+    bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
+        SYNTAX     Integer32 (0..32)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Length in bits of the IP address prefix in
+                 the Network Layer Reachability
+                 Information field."
+        ::= { bgp4PathAttrEntry 2 }
+
+    bgp4PathAttrIpAddrPrefix OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "An IP address prefix in the Network Layer
+                 Reachability Information field.  This object
+
+                 is an IP address containing the prefix with
+                 length specified by
+                 bgp4PathAttrIpAddrPrefixLen.
+                 Any bits beyond the length specified by
+                 bgp4PathAttrIpAddrPrefixLen are zeroed."
+        REFERENCE
+                "RFC 4271, Section 4.3."
+        ::= { bgp4PathAttrEntry 3 }
+
+    bgp4PathAttrOrigin OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       igp(1),-- networks are interior
+                       egp(2),-- networks learned via the
+                              -- EGP protocol
+                       incomplete(3) -- networks that
+                              -- are learned by some other
+                              -- means
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The ultimate origin of the path
+                 information."
+        REFERENCE
+                "RFC 4271, Section 4.3.
+                 RFC 4271, Section 5.1.1."
+        ::= { bgp4PathAttrEntry 4 }
+
+    bgp4PathAttrASPathSegment OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE (2..255))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The sequence of AS path segments.  Each AS
+                 path segment is represented by a triple
+                 <type, length, value>.
+
+                 The type is a 1-octet field that has two
+                 possible values:
+                     1      AS_SET: unordered set of ASes that a
+                                 route in the UPDATE message
+                                 has traversed
+
+                     2      AS_SEQUENCE: ordered set of ASes that
+                                 a route in the UPDATE message
+                                 has traversed.
+
+                 The length is a 1-octet field containing the
+
+                 number of ASes in the value field.
+
+                 The value field contains one or more AS
+                 numbers.  Each AS is represented in the octet
+                 string as a pair of octets according to the
+                 following algorithm:
+
+                    first-byte-of-pair = ASNumber / 256;
+                    second-byte-of-pair = ASNumber & 255;
+
+                 Known Issues:
+                 o BGP Confederations will result in
+                   a type of either 3 or 4.
+                 o An AS Path may be longer than 255 octets.
+                   This may result in this object containing
+                   a truncated AS Path."
+        REFERENCE
+                "RFC 4271, Section 4.3.
+                 RFC 4271, Section 5.1.2."
+        ::= { bgp4PathAttrEntry 5 }
+
+    bgp4PathAttrNextHop OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The address of the border router that
+                 should be used for the destination
+                 network.  This address is the NEXT_HOP
+                 address received in the UPDATE packet."
+        REFERENCE
+                "RFC 4271, Section 4.3.
+                 RFC 4271, Section 5.1.3."
+        ::= { bgp4PathAttrEntry 6 }
+
+    bgp4PathAttrMultiExitDisc OBJECT-TYPE
+        SYNTAX     Integer32 (-1..2147483647)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This metric is used to discriminate
+                 between multiple exit points to an
+                 adjacent autonomous system.  A value of -1
+                 indicates the absence of this attribute.
+
+                 Known Issues:
+                 o The BGP-4 specification uses an
+                   unsigned 32 bit number.  Thus, this
+
+                   object cannot represent the full
+                   range of the protocol."
+        REFERENCE
+                "RFC 4271, Section 4.3.
+                 RFC 4271, Section 5.1.4."
+        ::= { bgp4PathAttrEntry 7 }
+
+    bgp4PathAttrLocalPref OBJECT-TYPE
+        SYNTAX     Integer32 (-1..2147483647)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The originating BGP4 speaker's degree of
+                 preference for an advertised route.  A
+                 value of -1 indicates the absence of this
+                 attribute.
+
+                 Known Issues:
+                 o The BGP-4 specification uses an
+                   unsigned 32 bit number and thus this
+                   object cannot represent the full
+                   range of the protocol."
+        REFERENCE
+                "RFC 4271, Section 4.3.
+                 RFC 4271, Section 5.1.5."
+        ::= { bgp4PathAttrEntry 8 }
+
+    bgp4PathAttrAtomicAggregate OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       lessSpecificRouteNotSelected(1),
+                           -- Typo corrected from RFC 1657
+                       lessSpecificRouteSelected(2)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "If the ATOMIC_AGGREGATE attribute is present
+                 in the Path Attributes then this object MUST
+                 have a value of 'lessSpecificRouteNotSelected'.
+
+                 If the ATOMIC_AGGREGATE attribute is missing
+                 in the Path Attributes then this object MUST
+                 have a value of 'lessSpecificRouteSelected'.
+
+                 Note that ATOMIC_AGGREGATE is now a primarily
+                 informational attribute."
+        REFERENCE
+                "RFC 4271, Sections 5.1.6 and 9.1.4."
+        ::= { bgp4PathAttrEntry 9 }
+
+    bgp4PathAttrAggregatorAS OBJECT-TYPE
+        SYNTAX     Integer32 (0..65535)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The AS number of the last BGP4 speaker that
+                 performed route aggregation.  A value of
+                 zero (0) indicates the absence of this
+                 attribute.
+
+                 Note that propagation of AS of zero is illegal
+                 in the Internet."
+        REFERENCE
+                "RFC 4271, Section 5.1.7.
+                 RFC 4271, Section 9.2.2.2."
+        ::= { bgp4PathAttrEntry 10 }
+
+    bgp4PathAttrAggregatorAddr OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The IP address of the last BGP4 speaker
+                 that performed route aggregation.  A
+                 value of 0.0.0.0 indicates the absence
+                 of this attribute."
+        REFERENCE
+                "RFC 4271, Section 5.1.7.
+                 RFC 4271, Section 9.2.2.2."
+        ::= { bgp4PathAttrEntry 11 }
+
+    bgp4PathAttrCalcLocalPref OBJECT-TYPE
+        SYNTAX     Integer32 (-1..2147483647)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The degree of preference calculated by the
+                 receiving BGP4 speaker for an advertised
+                 route.  A value of -1 indicates the
+                 absence of this attribute.
+
+                 Known Issues:
+                 o The BGP-4 specification uses an
+                   unsigned 32 bit number and thus this
+                   object cannot represent the full
+                   range of the protocol."
+        REFERENCE
+                "RFC 4271, Section 9.1.1."
+        ::= { bgp4PathAttrEntry 12 }
+
+    bgp4PathAttrBest OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       false(1),-- not chosen as best route
+                       true(2) -- chosen as best route
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "An indication of whether this route
+                 was chosen as the best BGP4 route for this
+                 destination."
+        REFERENCE
+                "RFC 4271, Section 9.1.2."
+        ::= { bgp4PathAttrEntry 13 }
+
+    bgp4PathAttrUnknown OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(0..255))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "One or more path attributes not understood by
+                 this BGP4 speaker.
+
+                 Path attributes are recorded in the Update Path
+                 attribute format of type, length, value.
+
+                 Size zero (0) indicates the absence of such
+                 attributes.
+
+                 Octets beyond the maximum size, if any, are not
+                 recorded by this object.
+
+                 Known Issues:
+                 o Attributes understood by this speaker, but not
+                   represented in this MIB, are unavailable to
+                   the agent."
+        REFERENCE
+                "RFC 4271, Section 5."
+        ::= { bgp4PathAttrEntry 14 }
+
+    -- Traps.
+    -- Note that in RFC 1657, bgpTraps was incorrectly
+    -- assigned a value of { bgp 7 } and each of the
+    -- traps had the bgpPeerRemoteAddr object inappropriately
+
+    -- removed from their OBJECTS clause.  The following
+    -- definitions restore the semantics of the traps as
+    -- they were initially defined in RFC 1269.
+
+    bgpNotification OBJECT IDENTIFIER ::= { bgp 0 }
+
+    bgpEstablishedNotification NOTIFICATION-TYPE
+        OBJECTS { bgpPeerRemoteAddr,
+                  bgpPeerLastError,
+                  bgpPeerState      }
+        STATUS  current
+        DESCRIPTION
+                "The bgpEstablishedNotification event is generated
+                 when the BGP FSM enters the established state.
+
+                 This Notification replaces the bgpEstablished
+                 Notification."
+        ::= { bgpNotification 1 }
+
+    bgpBackwardTransNotification NOTIFICATION-TYPE
+        OBJECTS { bgpPeerRemoteAddr,
+                  bgpPeerLastError,
+                  bgpPeerState      }
+        STATUS  current
+        DESCRIPTION
+                "The bgpBackwardTransNotification event is
+                 generated when the BGP FSM moves from a higher
+                 numbered state to a lower numbered state.
+
+                 This Notification replaces the
+                 bgpBackwardsTransition Notification."
+        ::= { bgpNotification 2 }
+
+    -- { bgp 7 } is deprecated.  Do not allocate new objects or
+    --           notifications underneath this branch.
+
+    bgpTraps        OBJECT IDENTIFIER ::= { bgp 7 } -- deprecated
+
+    bgpEstablished NOTIFICATION-TYPE
+        OBJECTS { bgpPeerLastError,
+                  bgpPeerState      }
+        STATUS  deprecated
+        DESCRIPTION
+                "The bgpEstablished event is generated when
+                 the BGP FSM enters the established state.
+
+                 This Notification has been replaced by the
+                 bgpEstablishedNotification Notification."
+        ::= { bgpTraps 1 }
+
+    bgpBackwardTransition NOTIFICATION-TYPE
+        OBJECTS { bgpPeerLastError,
+                  bgpPeerState      }
+        STATUS  deprecated
+        DESCRIPTION
+                "The bgpBackwardTransition event is generated
+                 when the BGP FSM moves from a higher numbered
+                 state to a lower numbered state.
+
+                 This Notification has been replaced by the
+                 bgpBackwardTransNotification Notification."
+        ::= { bgpTraps 2 }
+
+    -- Conformance information
+
+    bgp4MIBConformance OBJECT IDENTIFIER
+        ::= { bgp 8 }
+    bgp4MIBCompliances OBJECT IDENTIFIER
+                ::= { bgp4MIBConformance 1 }
+    bgp4MIBGroups      OBJECT IDENTIFIER
+        ::= { bgp4MIBConformance 2 }
+
+    -- Compliance statements
+
+    bgp4MIBCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for entities which
+                 implement the BGP4 mib."
+        MODULE  -- this module
+            MANDATORY-GROUPS { bgp4MIBGlobalsGroup,
+                               bgp4MIBPeerGroup,
+                               bgp4MIBPathAttrGroup }
+            GROUP bgp4MIBNotificationGroup
+            DESCRIPTION
+                    "Implementation of BGP Notifications are
+                     completely optional in this MIB."
+        ::= { bgp4MIBCompliances 1 }
+
+    bgp4MIBDeprecatedCompliances MODULE-COMPLIANCE
+        STATUS  deprecated
+        DESCRIPTION
+                "The compliance statement documenting deprecated
+                 objects in the BGP4 mib."
+        MODULE  -- this module
+            GROUP bgp4MIBTrapGroup
+            DESCRIPTION
+                "Group containing TRAP objects that were
+                 improperly converted from SMIv1 in RFC 1657.
+                 The proper semantics have been restored
+                 with the objects in bgp4MIBNotificationGroup."
+        ::= { bgp4MIBCompliances 2 }
+
+    bgp4MIBObsoleteCompliances MODULE-COMPLIANCE
+        STATUS  obsolete
+        DESCRIPTION
+                "The compliance statement documenting obsolete
+                 objects in the BGP4 mib."
+        MODULE  -- this module
+            GROUP bgpRcvdPathAttrGroup
+            DESCRIPTION
+                "Group containing objects relevant to BGP-3
+                 and earlier objects."
+        ::= { bgp4MIBCompliances 3 }
+
+    -- Units of conformance
+
+    bgp4MIBGlobalsGroup OBJECT-GROUP
+        OBJECTS { bgpVersion,
+                  bgpLocalAs,
+                  bgpIdentifier }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects providing
+                 information on global BGP state."
+        ::= { bgp4MIBGroups 1 }
+
+    bgp4MIBPeerGroup OBJECT-GROUP
+        OBJECTS { bgpPeerIdentifier,
+                  bgpPeerState,
+                  bgpPeerAdminStatus,
+                  bgpPeerNegotiatedVersion,
+                  bgpPeerLocalAddr,
+                  bgpPeerLocalPort,
+                  bgpPeerRemoteAddr,
+                  bgpPeerRemotePort,
+                  bgpPeerRemoteAs,
+                  bgpPeerInUpdates,
+                  bgpPeerOutUpdates,
+                  bgpPeerInTotalMessages,
+                  bgpPeerOutTotalMessages,
+                  bgpPeerLastError,
+                  bgpPeerFsmEstablishedTransitions,
+                  bgpPeerFsmEstablishedTime,
+                  bgpPeerConnectRetryInterval,
+                  bgpPeerHoldTime,
+                  bgpPeerKeepAlive,
+                  bgpPeerHoldTimeConfigured,
+                  bgpPeerKeepAliveConfigured,
+                  bgpPeerMinASOriginationInterval,
+                  bgpPeerMinRouteAdvertisementInterval,
+                  bgpPeerInUpdateElapsedTime }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects for managing
+                 BGP peers."
+        ::= { bgp4MIBGroups 2 }
+
+    bgpRcvdPathAttrGroup OBJECT-GROUP
+        OBJECTS { bgpPathAttrPeer,
+                  bgpPathAttrDestNetwork,
+                  bgpPathAttrOrigin,
+                  bgpPathAttrASPath,
+                  bgpPathAttrNextHop,
+                  bgpPathAttrInterASMetric }
+        STATUS  obsolete
+        DESCRIPTION
+                "A collection of objects for managing BGP-3 and
+                earlier path entries.
+
+                This conformance group, like BGP-3, is obsolete."
+        ::= { bgp4MIBGroups 3 }
+
+    bgp4MIBPathAttrGroup OBJECT-GROUP
+        OBJECTS { bgp4PathAttrPeer,
+                  bgp4PathAttrIpAddrPrefixLen,
+                  bgp4PathAttrIpAddrPrefix,
+                  bgp4PathAttrOrigin,
+                  bgp4PathAttrASPathSegment,
+                  bgp4PathAttrNextHop,
+                  bgp4PathAttrMultiExitDisc,
+                  bgp4PathAttrLocalPref,
+                  bgp4PathAttrAtomicAggregate,
+                  bgp4PathAttrAggregatorAS,
+                  bgp4PathAttrAggregatorAddr,
+                  bgp4PathAttrCalcLocalPref,
+                  bgp4PathAttrBest,
+                  bgp4PathAttrUnknown }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects for managing
+                 BGP path entries."
+        ::= { bgp4MIBGroups 4 }
+
+    bgp4MIBTrapGroup NOTIFICATION-GROUP
+        NOTIFICATIONS { bgpEstablished,
+                        bgpBackwardTransition }
+        STATUS  deprecated
+        DESCRIPTION
+                "A collection of notifications for signaling
+                 changes in BGP peer relationships.
+
+                 Obsoleted by bgp4MIBNotificationGroup"
+        ::= { bgp4MIBGroups 5 }
+
+    bgp4MIBNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS { bgpEstablishedNotification,
+                        bgpBackwardTransNotification }
+        STATUS current
+        DESCRIPTION
+                "A collection of notifications for signaling
+                 changes in BGP peer relationships.
+
+                 Obsoletes bgp4MIBTrapGroup."
+        ::= { bgp4MIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/BRIDGE-MIB.mib b/snmp_builder/mibs/BRIDGE-MIB.mib
new file mode 100644
index 0000000..1e77a19
--- /dev/null
+++ b/snmp_builder/mibs/BRIDGE-MIB.mib
@@ -0,0 +1,1472 @@
+BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+-- ---------------------------------------------------------- --
+-- MIB for IEEE 802.1D devices
+-- ---------------------------------------------------------- --
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32, TimeTicks, mib-2
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    InterfaceIndex FROM IF-MIB
+    ;
+
+dot1dBridge MODULE-IDENTITY
+    LAST-UPDATED "200509190000Z"
+    ORGANIZATION "IETF Bridge MIB Working Group"
+    CONTACT-INFO
+        "Email: bridge-mib@ietf.org
+
+                 K.C. Norseth (Editor)
+                 L-3 Communications
+            Tel: +1 801-594-2809
+          Email: kenyon.c.norseth@L-3com.com
+         Postal: 640 N. 2200 West.
+                 Salt Lake City, Utah 84116-0850
+
+                 Les Bell (Editor)
+                 3Com Europe Limited
+          Phone: +44 1442 438025
+          Email: elbell@ntlworld.com
+         Postal: 3Com Centre, Boundary Way
+                 Hemel Hempstead
+                 Herts.  HP2 7YU
+                 UK
+
+         Send comments to <bridge-mib@ietf.org>"
+    DESCRIPTION
+        "The Bridge MIB module for managing devices that support
+        IEEE 802.1D.
+
+        Copyright (C) The Internet Society (2005).  This version of
+        this MIB module is part of RFC 4188; see the RFC itself for
+        full legal notices."
+    REVISION     "200509190000Z"
+    DESCRIPTION
+         "Third revision, published as part of RFC 4188.
+
+         The MIB module has been converted to SMIv2 format.
+         Conformance statements have been added and some
+         description and reference clauses have been updated.
+
+         The object dot1dStpPortPathCost32 was added to
+         support IEEE 802.1t and the permissible values of
+         dot1dStpPriority and dot1dStpPortPriority have been
+         clarified for bridges supporting IEEE 802.1t or
+         IEEE 802.1w.
+
+         The interpretation of dot1dStpTimeSinceTopologyChange
+         has been clarified for bridges supporting the Rapid
+         Spanning Tree Protocol (RSTP)."
+    REVISION     "199307310000Z"
+    DESCRIPTION
+         "Second revision, published as part of RFC 1493."
+    REVISION     "199112310000Z"
+    DESCRIPTION
+         "Initial revision, published as part of RFC 1286."
+    ::= { mib-2 17 }
+
+-- ---------------------------------------------------------- --
+-- Textual Conventions
+-- ---------------------------------------------------------- --
+
+BridgeId ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The Bridge-Identifier, as used in the Spanning Tree
+        Protocol, to uniquely identify a bridge.  Its first two
+        octets (in network byte order) contain a priority value,
+        and its last 6 octets contain the MAC address used to
+        refer to a bridge in a unique fashion (typically, the
+        numerically smallest MAC address of all ports on the
+        bridge)."
+    SYNTAX      OCTET STRING (SIZE (8))
+
+Timeout ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "A Spanning Tree Protocol (STP) timer in units of 1/100
+        seconds.  Several objects in this MIB module represent
+        values of timers used by the Spanning Tree Protocol.
+        In this MIB, these timers have values in units of
+        hundredths of a second (i.e., 1/100 secs).
+
+        These timers, when stored in a Spanning Tree Protocol's
+        BPDU, are in units of 1/256 seconds.  Note, however, that
+        802.1D-1998 specifies a settable granularity of no more
+        than one second for these timers.  To avoid ambiguity,
+        a conversion algorithm is defined below for converting
+        between the different units, which ensures a timer's
+        value is not distorted by multiple conversions.
+
+        To convert a Timeout value into a value in units of
+        1/256 seconds, the following algorithm should be used:
+
+            b = floor( (n * 256) / 100)
+
+        where:
+            floor   =  quotient [ignore remainder]
+            n is the value in 1/100 second units
+            b is the value in 1/256 second units
+
+        To convert the value from 1/256 second units back to
+        1/100 seconds, the following algorithm should be used:
+
+            n = ceiling( (b * 100) / 256)
+
+        where:
+            ceiling = quotient [if remainder is 0], or
+                      quotient + 1 [if remainder is nonzero]
+            n is the value in 1/100 second units
+
+            b is the value in 1/256 second units
+
+        Note: it is important that the arithmetic operations are
+        done in the order specified (i.e., multiply first,
+        divide second)."
+    SYNTAX      Integer32
+
+-- ---------------------------------------------------------- --
+-- subtrees in the Bridge MIB
+-- ---------------------------------------------------------- --
+
+dot1dNotifications  OBJECT IDENTIFIER ::= { dot1dBridge 0 }
+
+dot1dBase           OBJECT IDENTIFIER ::= { dot1dBridge 1 }
+dot1dStp            OBJECT IDENTIFIER ::= { dot1dBridge 2 }
+
+dot1dSr             OBJECT IDENTIFIER ::= { dot1dBridge 3 }
+-- documented in RFC 1525
+
+dot1dTp             OBJECT IDENTIFIER ::= { dot1dBridge 4 }
+dot1dStatic         OBJECT IDENTIFIER ::= { dot1dBridge 5 }
+
+-- Subtrees used by Bridge MIB Extensions:
+--      pBridgeMIB  MODULE-IDENTITY   ::= { dot1dBridge 6 }
+--      qBridgeMIB  MODULE-IDENTITY   ::= { dot1dBridge 7 }
+-- Note that the practice of registering related MIB modules
+-- below dot1dBridge has been discouraged since there is no
+-- robust mechanism to track such registrations.
+
+dot1dConformance    OBJECT IDENTIFIER ::= { dot1dBridge 8 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dBase subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dBase subtree is mandatory for all
+-- bridges.
+-- ---------------------------------------------------------- --
+
+dot1dBaseBridgeAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MAC address used by this bridge when it must be
+        referred to in a unique fashion.  It is recommended
+        that this be the numerically smallest MAC address of
+        all ports that belong to this bridge.  However, it is only
+
+        required to be unique.  When concatenated with
+        dot1dStpPriority, a unique BridgeIdentifier is formed,
+        which is used in the Spanning Tree Protocol."
+    REFERENCE
+        "IEEE 802.1D-1998: clauses 14.4.1.1.3 and 7.12.5"
+    ::= { dot1dBase 1 }
+
+dot1dBaseNumPorts OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "ports"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of ports controlled by this bridging
+        entity."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.4.1.1.3"
+    ::= { dot1dBase 2 }
+
+dot1dBaseType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    transparent-only(2),
+                    sourceroute-only(3),
+                    srt(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates what type of bridging this bridge can
+        perform.  If a bridge is actually performing a
+        certain type of bridging, this will be indicated by
+        entries in the port table for the given type."
+    ::= { dot1dBase 3 }
+
+-- ---------------------------------------------------------- --
+-- The Generic Bridge Port Table
+-- ---------------------------------------------------------- --
+dot1dBasePortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dBasePortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains generic information about every
+        port that is associated with this bridge.  Transparent,
+        source-route, and srt ports are included."
+    ::= { dot1dBase 4 }
+
+dot1dBasePortEntry OBJECT-TYPE
+    SYNTAX      Dot1dBasePortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of information for each port of the bridge."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.4.2, 14.6.1"
+    INDEX  { dot1dBasePort }
+    ::= { dot1dBasePortTable 1 }
+
+Dot1dBasePortEntry ::=
+    SEQUENCE {
+        dot1dBasePort
+            Integer32,
+        dot1dBasePortIfIndex
+            InterfaceIndex,
+        dot1dBasePortCircuit
+            OBJECT IDENTIFIER,
+        dot1dBasePortDelayExceededDiscards
+            Counter32,
+        dot1dBasePortMtuExceededDiscards
+            Counter32
+    }
+
+dot1dBasePort OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port for which this entry
+        contains bridge management information."
+    ::= { dot1dBasePortEntry 1 }
+
+dot1dBasePortIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of the instance of the ifIndex object,
+        defined in IF-MIB, for the interface corresponding
+        to this port."
+    ::= { dot1dBasePortEntry 2 }
+
+dot1dBasePortCircuit OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For a port that (potentially) has the same value of
+        dot1dBasePortIfIndex as another port on the same bridge.
+        This object contains the name of an object instance
+        unique to this port.  For example, in the case where
+        multiple ports correspond one-to-one with multiple X.25
+        virtual circuits, this value might identify an (e.g.,
+        the first) object instance associated with the X.25
+        virtual circuit corresponding to this port.
+
+        For a port which has a unique value of
+        dot1dBasePortIfIndex, this object can have the value
+        { 0 0 }."
+    ::= { dot1dBasePortEntry 3 }
+
+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames discarded by this port due
+        to excessive transit delay through the bridge.  It
+        is incremented by both transparent and source
+        route bridges."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dBasePortEntry 4 }
+
+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames discarded by this port due
+        to an excessive size.  It is incremented by both
+        transparent and source route bridges."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dBasePortEntry 5 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dStp subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dStp subtree is optional.  It is
+-- implemented by those bridges that support the Spanning Tree
+-- Protocol.
+-- ---------------------------------------------------------- --
+
+dot1dStpProtocolSpecification OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    decLb100(2),
+                    ieee8021d(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An indication of what version of the Spanning Tree
+        Protocol is being run.  The value 'decLb100(2)'
+        indicates the DEC LANbridge 100 Spanning Tree protocol.
+        IEEE 802.1D implementations will return 'ieee8021d(3)'.
+        If future versions of the IEEE Spanning Tree Protocol
+        that are incompatible with the current version
+        are released a new value will be defined."
+    ::= { dot1dStp 1 }
+
+dot1dStpPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of the write-able portion of the Bridge ID
+        (i.e., the first two octets of the (8 octet long) Bridge
+        ID).  The other (last) 6 octets of the Bridge ID are
+        given by the value of dot1dBaseBridgeAddress.
+        On bridges supporting IEEE 802.1t or IEEE 802.1w,
+        permissible values are 0-61440, in steps of 4096."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
+        IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
+    ::= { dot1dStp 2 }
+
+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The time (in hundredths of a second) since the
+        last time a topology change was detected by the
+        bridge entity.
+        For RSTP, this reports the time since the tcWhile
+        timer for any port on this Bridge was nonzero."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 14.8.1.1.,
+        IEEE 802.1w clause 14.8.1.1."
+    ::= { dot1dStp 3 }
+
+dot1dStpTopChanges OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of topology changes detected by
+        this bridge since the management entity was last
+        reset or initialized."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 14.8.1.1."
+    ::= { dot1dStp 4 }
+
+dot1dStpDesignatedRoot OBJECT-TYPE
+    SYNTAX      BridgeId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The bridge identifier of the root of the spanning
+        tree, as determined by the Spanning Tree Protocol,
+        as executed by this node.  This value is used as
+        the Root Identifier parameter in all Configuration
+        Bridge PDUs originated by this node."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.1"
+    ::= { dot1dStp 5 }
+
+dot1dStpRootCost OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The cost of the path to the root as seen from
+        this bridge."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.2"
+    ::= { dot1dStp 6 }
+
+dot1dStpRootPort OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port that offers the lowest
+        cost path from this bridge to the root bridge."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.3"
+    ::= { dot1dStp 7 }
+
+dot1dStpMaxAge OBJECT-TYPE
+    SYNTAX      Timeout
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum age of Spanning Tree Protocol information
+        learned from the network on any port before it is
+        discarded, in units of hundredths of a second.  This is
+        the actual value that this bridge is currently using."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.4"
+    ::= { dot1dStp 8 }
+
+dot1dStpHelloTime OBJECT-TYPE
+    SYNTAX      Timeout
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The amount of time between the transmission of
+        Configuration bridge PDUs by this node on any port when
+        it is the root of the spanning tree, or trying to become
+        so, in units of hundredths of a second.  This is the
+        actual value that this bridge is currently using."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.5"
+    ::= { dot1dStp 9 }
+
+dot1dStpHoldTime OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This time value determines the interval length
+        during which no more than two Configuration bridge
+        PDUs shall be transmitted by this node, in units
+        of hundredths of a second."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.14"
+    ::= { dot1dStp 10 }
+
+dot1dStpForwardDelay OBJECT-TYPE
+    SYNTAX      Timeout
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This time value, measured in units of hundredths of a
+        second, controls how fast a port changes its spanning
+        state when moving towards the Forwarding state.  The
+        value determines how long the port stays in each of the
+        Listening and Learning states, which precede the
+        Forwarding state.  This value is also used when a
+        topology change has been detected and is underway, to
+        age all dynamic entries in the Forwarding Database.
+        [Note that this value is the one that this bridge is
+        currently using, in contrast to
+        dot1dStpBridgeForwardDelay, which is the value that this
+        bridge and all others would start using if/when this
+        bridge were to become the root.]"
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.6"
+    ::= { dot1dStp 11 }
+
+dot1dStpBridgeMaxAge OBJECT-TYPE
+    SYNTAX      Timeout (600..4000)
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value that all bridges use for MaxAge when this
+        bridge is acting as the root.  Note that 802.1D-1998
+        specifies that the range for this parameter is related
+        to the value of dot1dStpBridgeHelloTime.  The
+        granularity of this timer is specified by 802.1D-1998 to
+        be 1 second.  An agent may return a badValue error if a
+        set is attempted to a value that is not a whole number
+        of seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.8"
+    ::= { dot1dStp 12 }
+
+dot1dStpBridgeHelloTime OBJECT-TYPE
+    SYNTAX      Timeout (100..1000)
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value that all bridges use for HelloTime when this
+        bridge is acting as the root.  The granularity of this
+        timer is specified by 802.1D-1998 to be 1 second.  An
+        agent may return a badValue error if a set is attempted
+
+        to a value that is not a whole number of seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.9"
+    ::= { dot1dStp 13 }
+
+dot1dStpBridgeForwardDelay OBJECT-TYPE
+    SYNTAX      Timeout (400..3000)
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value that all bridges use for ForwardDelay when
+        this bridge is acting as the root.  Note that
+        802.1D-1998 specifies that the range for this parameter
+        is related to the value of dot1dStpBridgeMaxAge.  The
+        granularity of this timer is specified by 802.1D-1998 to
+        be 1 second.  An agent may return a badValue error if a
+        set is attempted to a value that is not a whole number
+        of seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.10"
+    ::= { dot1dStp 14 }
+
+-- ---------------------------------------------------------- --
+-- The Spanning Tree Port Table
+-- ---------------------------------------------------------- --
+
+dot1dStpPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dStpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains port-specific information
+        for the Spanning Tree Protocol."
+    ::= { dot1dStp 15 }
+
+dot1dStpPortEntry OBJECT-TYPE
+    SYNTAX      Dot1dStpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of information maintained by every port about
+        the Spanning Tree Protocol state for that port."
+    INDEX   { dot1dStpPort }
+    ::= { dot1dStpPortTable 1 }
+
+Dot1dStpPortEntry ::=
+    SEQUENCE {
+
+        dot1dStpPort
+            Integer32,
+        dot1dStpPortPriority
+            Integer32,
+        dot1dStpPortState
+            INTEGER,
+        dot1dStpPortEnable
+            INTEGER,
+        dot1dStpPortPathCost
+            Integer32,
+        dot1dStpPortDesignatedRoot
+            BridgeId,
+        dot1dStpPortDesignatedCost
+            Integer32,
+        dot1dStpPortDesignatedBridge
+            BridgeId,
+        dot1dStpPortDesignatedPort
+            OCTET STRING,
+        dot1dStpPortForwardTransitions
+            Counter32,
+        dot1dStpPortPathCost32
+            Integer32
+    }
+
+dot1dStpPort OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port for which this entry
+        contains Spanning Tree Protocol management information."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.8.2.1.2"
+    ::= { dot1dStpPortEntry 1 }
+
+dot1dStpPortPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of the priority field that is contained in
+        the first (in network byte order) octet of the (2 octet
+        long) Port ID.  The other octet of the Port ID is given
+        by the value of dot1dStpPort.
+        On bridges supporting IEEE 802.1t or IEEE 802.1w,
+        permissible values are 0-240, in steps of 16."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
+        IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
+    ::= { dot1dStpPortEntry 2 }
+
+dot1dStpPortState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disabled(1),
+                    blocking(2),
+                    listening(3),
+                    learning(4),
+                    forwarding(5),
+                    broken(6)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port's current state, as defined by application of
+        the Spanning Tree Protocol.  This state controls what
+        action a port takes on reception of a frame.  If the
+        bridge has detected a port that is malfunctioning, it
+        will place that port into the broken(6) state.  For
+        ports that are disabled (see dot1dStpPortEnable), this
+        object will have a value of disabled(1)."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.2"
+    ::= { dot1dStpPortEntry 3 }
+
+dot1dStpPortEnable OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The enabled/disabled status of the port."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.2"
+    ::= { dot1dStpPortEntry 4 }
+
+dot1dStpPortPathCost OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The contribution of this port to the path cost of
+        paths towards the spanning tree root which include
+        this port.  802.1D-1998 recommends that the default
+        value of this parameter be in inverse proportion to
+
+        the speed of the attached LAN.
+
+        New implementations should support dot1dStpPortPathCost32.
+        If the port path costs exceeds the maximum value of this
+        object then this object should report the maximum value,
+        namely 65535.  Applications should try to read the
+        dot1dStpPortPathCost32 object if this object reports
+        the maximum value."
+    REFERENCE "IEEE 802.1D-1998: clause 8.5.5.3"
+        ::= { dot1dStpPortEntry 5 }
+
+dot1dStpPortDesignatedRoot OBJECT-TYPE
+    SYNTAX      BridgeId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The unique Bridge Identifier of the Bridge
+        recorded as the Root in the Configuration BPDUs
+        transmitted by the Designated Bridge for the
+        segment to which the port is attached."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.4"
+    ::= { dot1dStpPortEntry 6 }
+
+dot1dStpPortDesignatedCost OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The path cost of the Designated Port of the segment
+        connected to this port.  This value is compared to the
+        Root Path Cost field in received bridge PDUs."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.5"
+    ::= { dot1dStpPortEntry 7 }
+
+dot1dStpPortDesignatedBridge OBJECT-TYPE
+    SYNTAX      BridgeId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Bridge Identifier of the bridge that this
+        port considers to be the Designated Bridge for
+        this port's segment."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.6"
+    ::= { dot1dStpPortEntry 8 }
+
+dot1dStpPortDesignatedPort OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (2))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Port Identifier of the port on the Designated
+        Bridge for this port's segment."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.7"
+    ::= { dot1dStpPortEntry 9 }
+
+dot1dStpPortForwardTransitions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times this port has transitioned
+        from the Learning state to the Forwarding state."
+    ::= { dot1dStpPortEntry 10 }
+
+dot1dStpPortPathCost32 OBJECT-TYPE
+    SYNTAX      Integer32 (1..200000000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The contribution of this port to the path cost of
+        paths towards the spanning tree root which include
+        this port.  802.1D-1998 recommends that the default
+        value of this parameter be in inverse proportion to
+        the speed of the attached LAN.
+
+        This object replaces dot1dStpPortPathCost to support
+        IEEE 802.1t."
+    REFERENCE
+        "IEEE 802.1t clause 8.10.2, Table 8-5."
+    ::= { dot1dStpPortEntry 11 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dTp subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dTp subtree is optional.  It is
+-- implemented by those bridges that support the transparent
+-- bridging mode.  A transparent or SRT bridge will implement
+-- this subtree.
+-- ---------------------------------------------------------- --
+
+dot1dTpLearnedEntryDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of Forwarding Database entries that
+        have been or would have been learned, but have been
+        discarded due to a lack of storage space in the
+        Forwarding Database.  If this counter is increasing, it
+        indicates that the Forwarding Database is regularly
+        becoming full (a condition that has unpleasant
+        performance effects on the subnetwork).  If this counter
+        has a significant value but is not presently increasing,
+        it indicates that the problem has been occurring but is
+        not persistent."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.1.1.3"
+    ::= { dot1dTp 1 }
+
+dot1dTpAgingTime OBJECT-TYPE
+    SYNTAX      Integer32 (10..1000000)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The timeout period in seconds for aging out
+        dynamically-learned forwarding information.
+        802.1D-1998 recommends a default of 300 seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.1.1.3"
+    ::= { dot1dTp 2 }
+
+-- ---------------------------------------------------------- --
+--  The Forwarding Database for Transparent Bridges
+-- ---------------------------------------------------------- --
+
+dot1dTpFdbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTpFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about unicast
+        entries for which the bridge has forwarding and/or
+        filtering information.  This information is used
+        by the transparent bridging function in
+        determining how to propagate a received frame."
+    ::= { dot1dTp 3 }
+
+dot1dTpFdbEntry OBJECT-TYPE
+    SYNTAX      Dot1dTpFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a specific unicast MAC address
+        for which the bridge has some forwarding and/or
+        filtering information."
+    INDEX   { dot1dTpFdbAddress }
+    ::= { dot1dTpFdbTable 1 }
+
+Dot1dTpFdbEntry ::=
+    SEQUENCE {
+        dot1dTpFdbAddress
+            MacAddress,
+        dot1dTpFdbPort
+            Integer32,
+        dot1dTpFdbStatus
+            INTEGER
+    }
+
+dot1dTpFdbAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A unicast MAC address for which the bridge has
+        forwarding and/or filtering information."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
+    ::= { dot1dTpFdbEntry 1 }
+
+dot1dTpFdbPort OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0', or the port number of the port on
+        which a frame having a source address equal to the value
+        of the corresponding instance of dot1dTpFdbAddress has
+        been seen.  A value of '0' indicates that the port
+        number has not been learned, but that the bridge does
+        have some forwarding/filtering information about this
+        address (e.g., in the dot1dStaticTable).  Implementors
+        are encouraged to assign the port value to this object
+        whenever it is learned, even for addresses for which the
+        corresponding value of dot1dTpFdbStatus is not
+        learned(3)."
+    ::= { dot1dTpFdbEntry 2 }
+
+dot1dTpFdbStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    learned(3),
+                    self(4),
+                    mgmt(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The status of this entry.  The meanings of the
+        values are:
+            other(1) - none of the following.  This would
+                include the case where some other MIB object
+                (not the corresponding instance of
+                dot1dTpFdbPort, nor an entry in the
+                dot1dStaticTable) is being used to determine if
+                and how frames addressed to the value of the
+                corresponding instance of dot1dTpFdbAddress are
+                being forwarded.
+            invalid(2) - this entry is no longer valid (e.g.,
+                it was learned but has since aged out), but has
+                not yet been flushed from the table.
+            learned(3) - the value of the corresponding instance
+                of dot1dTpFdbPort was learned, and is being
+                used.
+            self(4) - the value of the corresponding instance of
+                dot1dTpFdbAddress represents one of the bridge's
+                addresses.  The corresponding instance of
+                dot1dTpFdbPort indicates which of the bridge's
+                ports has this address.
+            mgmt(5) - the value of the corresponding instance of
+                dot1dTpFdbAddress is also the value of an
+                existing instance of dot1dStaticAddress."
+    ::= { dot1dTpFdbEntry 3 }
+
+-- ---------------------------------------------------------- --
+--  Port Table for Transparent Bridges
+-- ---------------------------------------------------------- --
+
+dot1dTpPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about every port that
+        is associated with this transparent bridge."
+    ::= { dot1dTp 4 }
+
+dot1dTpPortEntry OBJECT-TYPE
+    SYNTAX      Dot1dTpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of information for each port of a transparent
+        bridge."
+    INDEX   { dot1dTpPort }
+    ::= { dot1dTpPortTable 1 }
+
+Dot1dTpPortEntry ::=
+    SEQUENCE {
+        dot1dTpPort
+            Integer32,
+        dot1dTpPortMaxInfo
+            Integer32,
+        dot1dTpPortInFrames
+            Counter32,
+        dot1dTpPortOutFrames
+            Counter32,
+        dot1dTpPortInDiscards
+            Counter32
+    }
+
+dot1dTpPort OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port for which this entry
+        contains Transparent bridging management information."
+    ::= { dot1dTpPortEntry 1 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest INFO field, but we can't because ifMtu is defined
+-- to be the size that the (inter-)network layer can use, which
+-- can differ from the MAC layer (especially if several layers
+-- of encapsulation are used).
+
+dot1dTpPortMaxInfo OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum size of the INFO (non-MAC) field that
+
+        this port will receive or transmit."
+    ::= { dot1dTpPortEntry 2 }
+
+dot1dTpPortInFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "frames"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames that have been received by this
+        port from its segment.  Note that a frame received on the
+        interface corresponding to this port is only counted by
+        this object if and only if it is for a protocol being
+        processed by the local bridging function, including
+        bridge management frames."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dTpPortEntry 3 }
+
+dot1dTpPortOutFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "frames"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames that have been transmitted by this
+        port to its segment.  Note that a frame transmitted on
+        the interface corresponding to this port is only counted
+        by this object if and only if it is for a protocol being
+        processed by the local bridging function, including
+        bridge management frames."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dTpPortEntry 4 }
+
+dot1dTpPortInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "frames"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Count of received valid frames that were discarded
+        (i.e., filtered) by the Forwarding Process."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dTpPortEntry 5 }
+
+-- ---------------------------------------------------------- --
+
+-- The Static (Destination-Address Filtering) Database
+-- ---------------------------------------------------------- --
+-- Implementation of this subtree is optional.
+-- ---------------------------------------------------------- --
+
+dot1dStaticTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dStaticEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing filtering information configured
+        into the bridge by (local or network) management
+        specifying the set of ports to which frames received
+        from specific ports and containing specific destination
+        addresses are allowed to be forwarded.  The value of
+        zero in this table, as the port number from which frames
+        with a specific destination address are received, is
+        used to specify all ports for which there is no specific
+        entry in this table for that particular destination
+        address.  Entries are valid for unicast and for
+        group/broadcast addresses."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.2"
+    ::= { dot1dStatic 1 }
+
+dot1dStaticEntry OBJECT-TYPE
+    SYNTAX      Dot1dStaticEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Filtering information configured into the bridge by
+        (local or network) management specifying the set of
+        ports to which frames received from a specific port and
+        containing a specific destination address are allowed to
+        be forwarded."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.2"
+    INDEX   { dot1dStaticAddress, dot1dStaticReceivePort }
+    ::= { dot1dStaticTable 1 }
+
+Dot1dStaticEntry ::=
+    SEQUENCE {
+        dot1dStaticAddress       MacAddress,
+        dot1dStaticReceivePort   Integer32,
+        dot1dStaticAllowedToGoTo OCTET STRING,
+        dot1dStaticStatus        INTEGER
+    }
+
+dot1dStaticAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The destination MAC address in a frame to which this
+        entry's filtering information applies.  This object can
+        take the value of a unicast address, a group address, or
+        the broadcast address."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
+    ::= { dot1dStaticEntry 1 }
+
+dot1dStaticReceivePort OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0', or the port number of the port
+        from which a frame must be received in order for this
+        entry's filtering information to apply.  A value of zero
+        indicates that this entry applies on all ports of the
+        bridge for which there is no other applicable entry."
+    ::= { dot1dStaticEntry 2 }
+
+dot1dStaticAllowedToGoTo OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..512))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of ports to which frames received from a
+        specific port and destined for a specific MAC address,
+        are allowed to be forwarded.  Each octet within the
+        value of this object specifies a set of eight ports,
+        with the first octet specifying ports 1 through 8, the
+        second octet specifying ports 9 through 16, etc.  Within
+        each octet, the most significant bit represents the
+        lowest numbered port, and the least significant bit
+        represents the highest numbered port.  Thus, each port
+        of the bridge is represented by a single bit within the
+        value of this object.  If that bit has a value of '1',
+        then that port is included in the set of ports; the port
+        is not included if its bit has a value of '0'.  (Note
+        that the setting of the bit corresponding to the port
+        from which a frame is received is irrelevant.)  The
+        default value of this object is a string of ones of
+        appropriate length.
+
+        The value of this object may exceed the required minimum
+        maximum message size of some SNMP transport (484 bytes,
+        in the case of SNMP over UDP, see RFC 3417, section 3.2).
+        SNMP engines on bridges supporting a large number of
+        ports must support appropriate maximum message sizes."
+    ::= { dot1dStaticEntry 3 }
+
+dot1dStaticStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    permanent(3),
+                    deleteOnReset(4),
+                    deleteOnTimeout(5)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry.
+        The default value is permanent(3).
+            other(1) - this entry is currently in use but the
+                conditions under which it will remain so are
+                different from each of the following values.
+            invalid(2) - writing this value to the object
+                removes the corresponding entry.
+            permanent(3) - this entry is currently in use and
+                will remain so after the next reset of the
+                bridge.
+            deleteOnReset(4) - this entry is currently in use
+                and will remain so until the next reset of the
+                bridge.
+            deleteOnTimeout(5) - this entry is currently in use
+                and will remain so until it is aged out."
+    ::= { dot1dStaticEntry 4 }
+
+-- ---------------------------------------------------------- --
+-- Notifications for use by Bridges
+-- ---------------------------------------------------------- --
+-- Notifications for the Spanning Tree Protocol
+-- ---------------------------------------------------------- --
+
+newRoot NOTIFICATION-TYPE
+    -- OBJECTS     { }
+    STATUS      current
+    DESCRIPTION
+        "The newRoot trap indicates that the sending agent has
+        become the new root of the Spanning Tree; the trap is
+        sent by a bridge soon after its election as the new
+
+        root, e.g., upon expiration of the Topology Change Timer,
+        immediately subsequent to its election.  Implementation
+        of this trap is optional."
+    ::= { dot1dNotifications 1 }
+
+topologyChange NOTIFICATION-TYPE
+    -- OBJECTS     { }
+    STATUS      current
+    DESCRIPTION
+        "A topologyChange trap is sent by a bridge when any of
+        its configured ports transitions from the Learning state
+        to the Forwarding state, or from the Forwarding state to
+        the Blocking state.  The trap is not sent if a newRoot
+        trap is sent for the same transition.  Implementation of
+        this trap is optional."
+    ::= { dot1dNotifications 2 }
+
+-- ---------------------------------------------------------- --
+-- IEEE 802.1D MIB - Conformance Information
+-- ---------------------------------------------------------- --
+
+dot1dGroups         OBJECT IDENTIFIER ::= { dot1dConformance 1 }
+dot1dCompliances    OBJECT IDENTIFIER ::= { dot1dConformance 2 }
+
+-- ---------------------------------------------------------- --
+-- units of conformance
+-- ---------------------------------------------------------- --
+
+-- ---------------------------------------------------------- --
+-- the dot1dBase group
+-- ---------------------------------------------------------- --
+
+dot1dBaseBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dBaseBridgeAddress,
+        dot1dBaseNumPorts,
+        dot1dBaseType
+    }
+    STATUS      current
+    DESCRIPTION
+        "Bridge level information for this device."
+    ::= { dot1dGroups 1 }
+
+dot1dBasePortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dBasePort,
+        dot1dBasePortIfIndex,
+        dot1dBasePortCircuit,
+        dot1dBasePortDelayExceededDiscards,
+        dot1dBasePortMtuExceededDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "Information for each port on this device."
+    ::= { dot1dGroups 2 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dStp group
+-- ---------------------------------------------------------- --
+
+dot1dStpBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStpProtocolSpecification,
+        dot1dStpPriority,
+        dot1dStpTimeSinceTopologyChange,
+        dot1dStpTopChanges,
+        dot1dStpDesignatedRoot,
+        dot1dStpRootCost,
+        dot1dStpRootPort,
+        dot1dStpMaxAge,
+        dot1dStpHelloTime,
+        dot1dStpHoldTime,
+        dot1dStpForwardDelay,
+        dot1dStpBridgeMaxAge,
+        dot1dStpBridgeHelloTime,
+        dot1dStpBridgeForwardDelay
+    }
+    STATUS      current
+    DESCRIPTION
+        "Bridge level Spanning Tree data for this device."
+    ::= { dot1dGroups 3 }
+
+dot1dStpPortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPort,
+        dot1dStpPortPriority,
+        dot1dStpPortState,
+        dot1dStpPortEnable,
+        dot1dStpPortPathCost,
+        dot1dStpPortDesignatedRoot,
+        dot1dStpPortDesignatedCost,
+        dot1dStpPortDesignatedBridge,
+        dot1dStpPortDesignatedPort,
+        dot1dStpPortForwardTransitions
+    }
+    STATUS      current
+    DESCRIPTION
+        "Spanning Tree data for each port on this device."
+    ::= { dot1dGroups 4 }
+
+dot1dStpPortGroup2 OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPort,
+        dot1dStpPortPriority,
+        dot1dStpPortState,
+        dot1dStpPortEnable,
+        dot1dStpPortDesignatedRoot,
+        dot1dStpPortDesignatedCost,
+        dot1dStpPortDesignatedBridge,
+        dot1dStpPortDesignatedPort,
+        dot1dStpPortForwardTransitions,
+        dot1dStpPortPathCost32
+    }
+    STATUS      current
+    DESCRIPTION
+        "Spanning Tree data for each port on this device."
+    ::= { dot1dGroups 5 }
+
+dot1dStpPortGroup3 OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPortPathCost32
+    }
+    STATUS      current
+    DESCRIPTION
+        "Spanning Tree data for devices supporting 32-bit
+         path costs."
+    ::= { dot1dGroups 6 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dTp group
+-- ---------------------------------------------------------- --
+
+dot1dTpBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTpLearnedEntryDiscards,
+        dot1dTpAgingTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "Bridge level Transparent Bridging data."
+    ::= { dot1dGroups 7 }
+
+dot1dTpFdbGroup OBJECT-GROUP
+    OBJECTS {
+
+        dot1dTpFdbAddress,
+        dot1dTpFdbPort,
+        dot1dTpFdbStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "Filtering Database information for the Bridge."
+    ::= { dot1dGroups 8 }
+
+dot1dTpGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTpPort,
+        dot1dTpPortMaxInfo,
+        dot1dTpPortInFrames,
+        dot1dTpPortOutFrames,
+        dot1dTpPortInDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "Dynamic Filtering Database information for each port of
+        the Bridge."
+    ::= { dot1dGroups 9 }
+
+-- ---------------------------------------------------------- --
+-- The Static (Destination-Address Filtering) Database
+-- ---------------------------------------------------------- --
+
+dot1dStaticGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStaticAddress,
+        dot1dStaticReceivePort,
+        dot1dStaticAllowedToGoTo,
+        dot1dStaticStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "Static Filtering Database information for each port of
+        the Bridge."
+    ::= { dot1dGroups 10 }
+
+-- ---------------------------------------------------------- --
+-- The Trap Notification Group
+-- ---------------------------------------------------------- --
+
+dot1dNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        newRoot,
+        topologyChange
+    }
+    STATUS      current
+    DESCRIPTION
+        "Group of objects describing notifications (traps)."
+    ::= { dot1dGroups 11 }
+
+-- ---------------------------------------------------------- --
+-- compliance statements
+-- ---------------------------------------------------------- --
+
+bridgeCompliance1493 MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for device support of bridging
+        services, as per RFC1493."
+
+    MODULE
+        MANDATORY-GROUPS {
+            dot1dBaseBridgeGroup,
+            dot1dBasePortGroup
+        }
+
+    GROUP   dot1dStpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the Spanning Tree Protocol."
+
+    GROUP   dot1dStpPortGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the Spanning Tree Protocol."
+
+    GROUP   dot1dTpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the transparent bridging mode.  A
+        transparent or SRT bridge will implement this group."
+
+    GROUP   dot1dTpFdbGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the transparent bridging mode.  A
+        transparent or SRT bridge will implement this group."
+
+    GROUP   dot1dTpGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+
+        that support the transparent bridging mode.  A
+        transparent or SRT bridge will implement this group."
+
+    GROUP   dot1dStaticGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP dot1dNotificationGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { dot1dCompliances 1 }
+
+bridgeCompliance4188 MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for device support of bridging
+        services.  This supports 32-bit Path Cost values and the
+        more restricted bridge and port priorities, as per IEEE
+        802.1t.
+
+        Full support for the 802.1D management objects requires that
+        the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as
+        well as the IF-MIB [RFC2863] objects ifIndex, ifType,
+        ifDescr, ifPhysAddress, and ifLastChange are implemented."
+
+    MODULE
+        MANDATORY-GROUPS {
+            dot1dBaseBridgeGroup,
+            dot1dBasePortGroup
+        }
+
+    GROUP   dot1dStpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the Spanning Tree Protocol."
+
+    OBJECT dot1dStpPriority
+    SYNTAX Integer32 (0|4096|8192|12288|16384|20480|24576
+                     |28672|32768|36864|40960|45056|49152
+                     |53248|57344|61440)
+    DESCRIPTION
+        "The possible values defined by IEEE 802.1t."
+
+    GROUP   dot1dStpPortGroup2
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the Spanning Tree Protocol."
+
+    GROUP   dot1dStpPortGroup3
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+         that support the Spanning Tree Protocol and 32-bit path
+         costs.  In particular, this includes devices supporting
+         IEEE 802.1t and IEEE 802.1w."
+
+    OBJECT dot1dStpPortPriority
+    SYNTAX Integer32 (0|16|32|48|64|80|96|112|128
+                     |144|160|176|192|208|224|240)
+    DESCRIPTION
+        "The possible values defined by IEEE 802.1t."
+
+    GROUP   dot1dTpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the transparent bridging
+        mode.  A transparent or SRT bridge will implement
+        this group."
+
+    GROUP   dot1dTpFdbGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the transparent bridging
+        mode.  A transparent or SRT bridge will implement
+        this group."
+
+    GROUP   dot1dTpGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the transparent bridging
+        mode.  A transparent or SRT bridge will implement
+        this group."
+
+    GROUP   dot1dStaticGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP dot1dNotificationGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { dot1dCompliances 2 }
+
+END
diff --git a/snmp_builder/mibs/CAPWAP-BASE-MIB.mib b/snmp_builder/mibs/CAPWAP-BASE-MIB.mib
new file mode 100644
index 0000000..f7a8574
--- /dev/null
+++ b/snmp_builder/mibs/CAPWAP-BASE-MIB.mib
@@ -0,0 +1,2618 @@
+CAPWAP-BASE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+   PhysAddress, TEXTUAL-CONVENTION, TruthValue,
+   DateAndTime, RowStatus
+       FROM SNMPv2-TC
+   LongUtf8String
+       FROM SYSAPPL-MIB
+   InterfaceIndex, ifGeneralInformationGroup
+       FROM IF-MIB
+   PhysicalIndex
+       FROM ENTITY-MIB
+   SnmpAdminString
+       FROM SNMP-FRAMEWORK-MIB
+   NOTIFICATION-GROUP, OBJECT-GROUP, MODULE-COMPLIANCE
+       FROM SNMPv2-CONF
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
+   Integer32, Unsigned32, Counter32, Gauge32, TimeTicks
+
+       FROM SNMPv2-SMI
+   InetAddressType, InetAddress
+       FROM INET-ADDRESS-MIB;
+
+capwapBaseMIB MODULE-IDENTITY
+    LAST-UPDATED "201004300000Z"        -- 30 April 2010
+    ORGANIZATION "IETF Control And Provisioning of Wireless Access
+                  Points (CAPWAP) Working Group
+                  http://www.ietf.org/html.charters/capwap-charter.html"
+    CONTACT-INFO
+        "General Discussion: capwap@frascone.com
+         To Subscribe: http://lists.frascone.com/mailman/listinfo/capwap
+
+         Yang Shi (editor)
+         Hangzhou H3C Tech. Co., Ltd.
+         Beijing R&D Center of H3C, Digital Technology Plaza
+         NO. 9 Shangdi 9th Street, Haidian District
+         Beijing  100085
+         China
+         Phone: +86 010 82775276
+         Email: rishyang@gmail.com
+
+         David T. Perkins (editor)
+         228 Bayview Dr.
+         San Carlos, CA  94070
+         USA
+         Phone: +1 408 394-8702
+         Email: dperkins@dsperkins.com
+
+         Chris Elliott (editor)
+         1516 Kent St.
+         Durham, NC  27707
+         USA
+         Phone: +1 919-308-1216
+         Email: chelliot@pobox.com
+
+         Yong Zhang (editor)
+         Fortinet, Inc.
+         1090 Kifer Road
+         Sunnyvale, CA  94086
+         USA
+         Email: yzhang@fortinet.com"
+    DESCRIPTION
+        "Copyright (c) 2010 IETF Trust and the persons identified as
+         authors of the code. All rights reserved.
+
+         Redistribution and use in source and binary forms, with or
+         without modification, is permitted pursuant to, and subject
+         to the license terms contained in, the Simplified BSD License
+         set forth in Section 4.c of the IETF Trust's Legal Provisions
+         Relating to IETF Documents
+         (http://trustee.ietf.org/license-info).
+
+         This version of this MIB module is part of RFC 5833;
+         see the RFC itself for full legal notices.
+
+         This MIB module contains managed object definitions for
+         the CAPWAP Protocol."
+    REVISION    "201004300000Z"
+    DESCRIPTION
+        "Initial version published as RFC 5833"
+         ::= { mib-2 196 }
+
+-- Textual Conventions
+
+CapwapBaseWtpProfileIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP profile."
+    SYNTAX      Unsigned32 (0..4096)
+
+CapwapBaseWtpIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP instance.
+         As usual, the Base MAC address of the WTP is used."
+    SYNTAX      OCTET STRING (SIZE(6|8))
+
+CapwapBaseStationIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a station instance.
+         As usual, the MAC address of the station is used."
+    SYNTAX      OCTET STRING (SIZE(6|8))
+
+CapwapBaseRadioIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a radio on a WTP."
+    SYNTAX      Unsigned32 (1..31)
+
+CapwapBaseTunnelModeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Represents the tunneling modes of operation that are
+         supported by a WTP.
+         The WTP MAY support more than one option, represented by
+         the bit field below:
+           localBridging(0) - Local bridging mode
+           dot3Tunnel(1)    - 802.3 frame tunnel mode
+           nativeTunnel(2)  - Native frame tunnel mode"
+    REFERENCE
+        "Section 4.6.43 of CAPWAP Protocol Specification, RFC 5415."
+    SYNTAX      BITS {
+                  localBridging(0),
+                  dot3Tunnel(1),
+                  nativeTunnel(2)
+                }
+
+CapwapBaseMacTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Represents the MAC mode of operation supported by a WTP.
+         The following enumerated values are supported:
+           localMAC(0) - Local-MAC mode
+           splitMAC(1) - Split-MAC mode
+           both(2)     - Both Local-MAC and Split-MAC
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object
+         follows that rule."
+    REFERENCE
+        "Section 4.6.44 of CAPWAP Protocol Specification, RFC 5415."
+    SYNTAX      INTEGER {
+                  localMAC(0),
+                  splitMAC(1),
+                  both(2)
+                }
+
+CapwapBaseChannelTypeTC::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Represents the channel type for CAPWAP protocol.
+         The following enumerated values are supported:
+           data(1)    - Data channel
+           control(2) - Control channel"
+    SYNTAX      INTEGER {
+                  data(1),
+                  control(2)
+                }
+
+CapwapBaseAuthenMethodTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Represents the authentication credential type for a WTP.
+         The following enumerated values are supported:
+           other(1) - Other method, for example, vendor specific
+           clear(2) - Clear text and no authentication
+           x509(3)  - X.509 certificate authentication
+           psk(4)   - Pre-Shared secret authentication
+         As a mandatory requirement, CAPWAP control channel
+         authentication SHOULD use DTLS, either by certificate or
+         PSK.  For data channel authentication, DTLS is optional."
+    SYNTAX      INTEGER {
+                  other(1),
+                  clear(2),
+                  x509(3),
+                  psk(4)
+                }
+
+-- Top-level components of this MIB module
+
+-- Notifications
+capwapBaseNotifications OBJECT IDENTIFIER
+    ::= { capwapBaseMIB 0 }
+-- Tables, Scalars
+capwapBaseObjects OBJECT IDENTIFIER
+    ::= { capwapBaseMIB 1 }
+-- Conformance
+capwapBaseConformance OBJECT IDENTIFIER
+    ::= { capwapBaseMIB 2 }
+
+-- AC Objects Group
+
+capwapBaseAc OBJECT IDENTIFIER
+    ::= { capwapBaseObjects 1 }
+
+capwapBaseWtpSessions OBJECT-TYPE
+    SYNTAX      Gauge32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the total number of WTPs that are connecting to
+         the AC."
+    REFERENCE
+        "Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 1 }
+
+capwapBaseWtpSessionsLimit  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum number of WTP sessions configured on
+         the AC.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 2 }
+
+capwapBaseStationSessions  OBJECT-TYPE
+    SYNTAX      Gauge32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the total number of stations that are accessing
+         the wireless service provided by the AC."
+    REFERENCE
+        "Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 3 }
+
+capwapBaseStationSessionsLimit  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum number of station sessions configured
+         on the AC.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 4 }
+
+capwapBaseDataChannelDTLSPolicyOptions  OBJECT-TYPE
+    SYNTAX      BITS {
+                  other(0),
+                  clear(1),
+                  dtls(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The AC communicates its policy on the use of DTLS for
+         the CAPWAP data channel.
+         The AC MAY support more than one option, represented by the bit
+         field below:
+
+           other(0) - Other method, for example, vendor specific
+           clear(1) - Clear text
+           dtls(2)  - DTLS"
+    REFERENCE
+        "Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 5 }
+
+capwapBaseControlChannelAuthenOptions  OBJECT-TYPE
+    SYNTAX      BITS {
+                  x509(0),
+                  psk(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the authentication credential type supported by the
+         AC for CAPWAP control channel.
+         The AC MAY support more than one option, represented by the bit
+         field below:
+           x509(0) - X.509 certificate based
+           psk(1)  - Pre-Shared secret"
+    REFERENCE
+        "Section 4.6.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 6 }
+
+-- capwapBaseAcNameListTable table
+
+capwapBaseAcNameListTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseAcNameListEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that configure the AC name list.
+         Values of all read-create objects in this table are
+         persistent at restart/reboot."
+    REFERENCE
+        "Section 4.6.5 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 9 }
+
+capwapBaseAcNameListEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseAcNameListEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that configures the AC name list."
+    INDEX { capwapBaseAcNameListId }
+    ::= { capwapBaseAcNameListTable 1 }
+
+CapwapBaseAcNameListEntry ::= SEQUENCE {
+      capwapBaseAcNameListId          Unsigned32,
+      capwapBaseAcNameListName        LongUtf8String,
+      capwapBaseAcNameListPriority    Unsigned32,
+      capwapBaseAcNameListRowStatus   RowStatus
+    }
+
+capwapBaseAcNameListId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of an AC Name list."
+    ::= { capwapBaseAcNameListEntry 1 }
+
+capwapBaseAcNameListName OBJECT-TYPE
+    SYNTAX      LongUtf8String (SIZE(1..512))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the name of an AC, and it is expected to be
+         an UTF-8 encoded string."
+    REFERENCE
+        "Section 4.6.5 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAcNameListEntry 2 }
+
+capwapBaseAcNameListPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the priority order of the preferred AC.
+         For instance, the value of one (1) is used to set the primary
+         AC, the value of two (2) is used to set the secondary AC, etc."
+    REFERENCE
+        "Section 4.6.5 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAcNameListEntry 3 }
+
+capwapBaseAcNameListRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to create, modify, and/or delete a row
+         in this table.
+         The value of capwapBaseAcNameListName and
+         capwapBaseAcNameListPriority can be changed when this
+         object is in state 'active' or in 'notInService'.
+
+         The capwapBaseAcNameListRowStatus may be changed to 'active'
+         if all the managed objects in the conceptual row with
+         MAX-ACCESS read-create have been assigned valid values."
+    ::= { capwapBaseAcNameListEntry 4 }
+
+-- End of capwapBaseAcNameListTable table
+
+-- capwapBaseMacAclTable table
+
+capwapBaseMacAclTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseMacAclEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that configure station Access Control
+         Lists (ACLs).
+         The WTP will not provide service to the MAC addresses
+         configured in this table.
+         Values of all read-create objects in this table are persistent
+         at AC restart/reboot."
+    REFERENCE
+        "Section 4.6.7 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseAc 10 }
+
+capwapBaseMacAclEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseMacAclEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that configures station Access Control
+         Lists (ACLs)."
+    INDEX { capwapBaseMacAclId }
+    ::= { capwapBaseMacAclTable 1 }
+
+CapwapBaseMacAclEntry ::= SEQUENCE {
+      capwapBaseMacAclId           Unsigned32,
+      capwapBaseMacAclStationId    CapwapBaseStationIdTC,
+      capwapBaseMacAclRowStatus    RowStatus
+    }
+
+capwapBaseMacAclId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of an ACL."
+    ::= { capwapBaseMacAclEntry 1 }
+
+capwapBaseMacAclStationId OBJECT-TYPE
+    SYNTAX      CapwapBaseStationIdTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the MAC address of a station to which WTPs will
+         no longer provides service."
+    REFERENCE
+        "Section 4.6.7 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseMacAclEntry 2 }
+
+capwapBaseMacAclRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to create, modify, and/or delete a row
+         in this table.
+         The value of capwapBaseMacAclStationId can be changed when
+         this object is in state 'active' or in 'notInService'.
+         The capwapBaseMacAclRowStatus may be changed to 'active'
+         if all the managed objects in the conceptual row with
+         MAX-ACCESS read-create have been assigned valid values."
+    ::= { capwapBaseMacAclEntry 3 }
+
+-- End of capwapBaseMacAclTable table
+
+-- End of AC Objects Group
+
+-- WTP Objects Group
+
+capwapBaseWtps OBJECT IDENTIFIER
+    ::= { capwapBaseObjects 2 }
+
+-- capwapBaseWtpProfileTable Table
+
+capwapBaseWtpProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseWtpProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that configure WTP profiles for WTPs to
+         be managed before they connect to the AC.
+         An operator could change a WTP's configuration by changing
+         the values of parameters in the corresponding WTP profile,
+         then the WTP could get the new configuration through the
+         CAPWAP control channel.
+
+         Values of all read-create objects in this table are
+         persistent at restart/reboot."
+    ::= { capwapBaseWtps 1 }
+
+capwapBaseWtpProfileEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that configures and displays a WTP profile."
+    INDEX { capwapBaseWtpProfileId }
+    ::= { capwapBaseWtpProfileTable 1 }
+
+CapwapBaseWtpProfileEntry ::= SEQUENCE {
+      capwapBaseWtpProfileId                  CapwapBaseWtpProfileIdTC,
+      capwapBaseWtpProfileName                       SnmpAdminString,
+      capwapBaseWtpProfileWtpMacAddress              CapwapBaseWtpIdTC,
+      capwapBaseWtpProfileWtpModelNumber             SnmpAdminString,
+      capwapBaseWtpProfileWtpName                    LongUtf8String,
+      capwapBaseWtpProfileWtpLocation                LongUtf8String,
+      capwapBaseWtpProfileWtpStaticIpEnable          TruthValue,
+      capwapBaseWtpProfileWtpStaticIpType            InetAddressType,
+      capwapBaseWtpProfileWtpStaticIpAddress         InetAddress,
+      capwapBaseWtpProfileWtpNetmask                 InetAddress,
+      capwapBaseWtpProfileWtpGateway                 InetAddress,
+      capwapBaseWtpProfileWtpFallbackEnable          INTEGER,
+      capwapBaseWtpProfileWtpEchoInterval            Unsigned32,
+      capwapBaseWtpProfileWtpIdleTimeout             Unsigned32,
+      capwapBaseWtpProfileWtpMaxDiscoveryInterval    Unsigned32,
+      capwapBaseWtpProfileWtpReportInterval          Unsigned32,
+      capwapBaseWtpProfileWtpStatisticsTimer         Unsigned32,
+      capwapBaseWtpProfileWtpEcnSupport              INTEGER,
+      capwapBaseWtpProfileRowStatus                  RowStatus
+    }
+
+capwapBaseWtpProfileId OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpProfileIdTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP profile."
+    ::= { capwapBaseWtpProfileEntry 1 }
+
+capwapBaseWtpProfileName  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the name of a WTP profile."
+    ::= { capwapBaseWtpProfileEntry 2 }
+
+capwapBaseWtpProfileWtpMacAddress  OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpIdTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the Base MAC address of a WTP.
+         A WTP profile MUST contain the Base MAC address of the WTP
+         because the CAPWAP message received from the WTP contains
+         its Base MAC address and the AC uses the Base MAC address to
+         find the corresponding WTP profile.
+         Section 4.6.40 of [RFC5415] omits indicating that the WTP's
+         Base MAC address must be included in the WTP Board Data
+         message element.  This is a known errata item and should be
+         fixed in any future revision of the RFC 5415."
+    REFERENCE
+        "Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 3 }
+
+capwapBaseWtpProfileWtpModelNumber  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the model number of a WTP.
+         A WTP profile MUST include the WTP's model number, which
+         reflects the number of Physical Layer (PHY) radios on the WTP.
+         In this way, the creation of a WTP profile triggers the AC
+         to automatically create the same number of WTP Virtual Radio
+         Interfaces corresponding to the WTP's PHY radios without
+         manual intervention.  With the ifIndexes of WTP Virtual
+         Radio Interfaces, the operator could configure and manage
+         the WTP's PHY radios through the wireless binding MIB
+         modules."
+    REFERENCE
+        "Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 4 }
+
+capwapBaseWtpProfileWtpName  OBJECT-TYPE
+    SYNTAX      LongUtf8String (SIZE(1..512))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the name of the WTP."
+    REFERENCE
+        "Section 4.6.45 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 5 }
+
+capwapBaseWtpProfileWtpLocation  OBJECT-TYPE
+    SYNTAX      LongUtf8String (SIZE(1..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the location of the WTP."
+    REFERENCE
+        "Section 4.6.30 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 6 }
+
+capwapBaseWtpProfileWtpStaticIpEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the WTP SHOULD use a static IP address
+         or not.  A value of false disables the static IP address,
+         while a value of true enables it."
+    REFERENCE
+        "Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 7 }
+
+capwapBaseWtpProfileWtpStaticIpType OBJECT-TYPE
+    SYNTAX      InetAddressType {ipv4(1)}
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the static IP address type used by the WTP.
+         Only ipv4(1) is supported by the object.
+         Although the CAPWAP protocol [RFC5415] supports both IPv4
+         and IPv6, note that the CAPWAP field modeled by this
+         object does not support IPv6, so the object does not
+         support ipv6(2)."
+    REFERENCE
+        "Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 8 }
+
+capwapBaseWtpProfileWtpStaticIpAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When capwapBaseWtpProfileWtpStaticIpEnable is true,
+         it represents the static IP address to be assigned to the WTP.
+         The format of this IP address is determined by the
+         corresponding instance of object
+
+         capwapBaseWtpProfileWtpStaticIpType."
+    REFERENCE
+        "Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 9 }
+
+capwapBaseWtpProfileWtpNetmask OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When capwapBaseWtpProfileWtpStaticIpEnable is true,
+         it represents the netmask to be assigned to the WTP.
+         The format of this netmask is determined by the
+         corresponding instance of object
+         capwapBaseWtpProfileWtpStaticIpType."
+    REFERENCE
+        "Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 10 }
+
+capwapBaseWtpProfileWtpGateway OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When capwapBaseWtpProfileWtpStaticIpEnable is true,
+         it represents the gateway to be assigned to the WTP.
+         The format of this IP address is determined by the
+         corresponding instance of object
+         capwapBaseWtpProfileWtpStaticIpType."
+    REFERENCE
+        "Section 4.6.48 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 11 }
+
+capwapBaseWtpProfileWtpFallbackEnable OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  enabled(1),
+                  disabled(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents whether to enable or disable automatic CAPWAP
+         fallback in the event that a WTP detects its preferred AC
+         and is not currently connected to it.
+         The following enumerated values are supported:
+           enabled(1)  - The fallback mode is enabled
+           disabled(2) - The fallback mode is disabled"
+    REFERENCE
+        "Section 4.6.42 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { enabled }
+     ::= { capwapBaseWtpProfileEntry 12 }
+
+capwapBaseWtpProfileWtpEchoInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the minimum time, in seconds, between sending Echo
+         Request messages to the AC that the WTP has joined."
+    REFERENCE
+        "Section 4.7.7 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 30 }
+    ::= { capwapBaseWtpProfileEntry 13 }
+
+capwapBaseWtpProfileWtpIdleTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the idle timeout value that the WTP SHOULD enforce
+         for its active stations."
+    REFERENCE
+        "Section 4.7.8 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 300 }
+    ::= { capwapBaseWtpProfileEntry 14 }
+
+capwapBaseWtpProfileWtpMaxDiscoveryInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (2..180)
+    UNITS       "second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum time allowed between sending Discovery
+         Request messages, in seconds."
+    REFERENCE
+        "Section 4.7.10 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 20 }
+    ::= { capwapBaseWtpProfileEntry 15 }
+
+capwapBaseWtpProfileWtpReportInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the interval for WTP to send the Decryption Error
+         report."
+    REFERENCE
+        "Section 4.7.11 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 120 }
+    ::= { capwapBaseWtpProfileEntry 16 }
+
+capwapBaseWtpProfileWtpStatisticsTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the interval the WTP uses between the WTP Event
+         Requests it transmits to the AC to communicate its statistics,
+         in seconds."
+    REFERENCE
+        "Section 4.7.14 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 120 }
+    ::= { capwapBaseWtpProfileEntry 17 }
+
+capwapBaseWtpProfileWtpEcnSupport OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  limited(0),
+                  fullAndLimited(1)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the support for the Explicit Congestion Notification
+         (ECN) bits, as defined in [RFC3168].
+         The following enumerated values are supported:
+           limited(0)        - Limited ECN support
+           fullAndLimited(1) - Full and limited ECN support
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object follows
+         that rule."
+    REFERENCE
+        "Section 4.6.25 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpProfileEntry 18 }
+
+capwapBaseWtpProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to create, modify, and/or delete a row
+
+         in this table.
+         The value of capwapBaseWtpProfileName,
+         capwapBaseWtpProfileWtpName and capwapBaseWtpProfileWtpLocation
+         can be changed when this object is in state 'active' or in
+         'notInService'.
+         The other objects in a row can be modified only when the value
+         of this object in the corresponding conceptual row is not
+         'active'.  Thus, to modify one or more of the objects in
+         this conceptual row:
+              a. change the row status to 'notInService'
+              b. change the values of the row
+              c. change the row status to 'active'
+         The capwapBaseWtpProfileRowStatus may be changed to 'active'
+         if the managed objects capwapBaseWtpProfileName,
+         capwapBaseWtpProfileWtpMacAddress,
+         capwapBaseWtpProfileWtpModelNumber,
+         capwapBaseWtpProfileWtpName, and
+         capwapBaseWtpProfileWtpLocation in the conceptual row
+         have been assigned valid values.
+
+         Deleting a WTP profile in use will disconnect the WTP from
+         the AC.  So the network management system SHOULD
+         ask the operator to confirm such an operation.
+         When a WTP profile entry is removed from the table,
+         the corresponding WTP Virtual Radio Interfaces are also
+         removed from the capwapBaseWirelessBindingTable and
+         ifTable [RFC2863].
+         Also, the related object instances SHOULD be removed from
+         the wireless binding MIB modules such as the IEEE 802.11
+         MIB module [IEEE.802-11.2007]."
+    ::= { capwapBaseWtpProfileEntry 19 }
+
+-- End of capwapBaseWtpProfileTable table
+
+-- capwapBaseWtpStateTable table
+
+capwapBaseWtpStateTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseWtpStateEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that indicate the AC's CAPWAP FSM state
+         for each WTP, and helps the operator to query a WTP's
+         current configuration."
+    ::= { capwapBaseWtps 2 }
+
+capwapBaseWtpStateEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpStateEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that displays the AC's CAPWAP FSM state
+         for each WTP.
+         Also, the operator could query the current configuration
+         of a WTP by using the identifier of the corresponding
+         WTP profile."
+    INDEX { capwapBaseWtpStateWtpId }
+    ::= { capwapBaseWtpStateTable 1 }
+
+CapwapBaseWtpStateEntry ::= SEQUENCE {
+      capwapBaseWtpStateWtpId                   CapwapBaseWtpIdTC,
+      capwapBaseWtpStateWtpIpAddressType        InetAddressType,
+      capwapBaseWtpStateWtpIpAddress            InetAddress,
+      capwapBaseWtpStateWtpLocalIpAddressType   InetAddressType,
+      capwapBaseWtpStateWtpLocalIpAddress       InetAddress,
+      capwapBaseWtpStateWtpBaseMacAddress       PhysAddress,
+      capwapBaseWtpState                        INTEGER,
+      capwapBaseWtpStateWtpUpTime               TimeTicks,
+      capwapBaseWtpStateWtpCurrWtpProfileId     CapwapBaseWtpProfileIdTC
+    }
+
+capwapBaseWtpStateWtpId OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpIdTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP."
+    ::= { capwapBaseWtpStateEntry 1 }
+
+capwapBaseWtpStateWtpIpAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the IP address type of a WTP.
+         Only ipv4(1) and ipv6(2) are supported by the object."
+    ::= { capwapBaseWtpStateEntry 2 }
+
+capwapBaseWtpStateWtpIpAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the IP address of a WTP that corresponds to
+         the IP address in the IP packet header.
+
+         The format of this IP address is determined by
+         the corresponding instance of object
+         capwapBaseWtpStateWtpIpAddressType."
+    REFERENCE
+        "Section 4 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpStateEntry 3 }
+
+capwapBaseWtpStateWtpLocalIpAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the local IP address type of a WTP.
+         Only ipv4(1) and ipv6(2) are supported by the object."
+    ::= { capwapBaseWtpStateEntry 4 }
+
+capwapBaseWtpStateWtpLocalIpAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the local IP address of a WTP and models the
+         CAPWAP Local IPv4 Address or CAPWAP Local IPv6 Address fields
+         [RFC5415].
+         If a Network Address Translation (NAT) device is present
+         between WTP and AC, the value of
+         capwapBaseWtpStateWtpLocalIpAddress will be different from the
+         value of capwapBaseWtpStateWtpIpAddress.
+         The format of this IP address is determined by
+         the corresponding instance of object
+         capwapBaseWtpStateWtpLocalIpAddressType."
+    REFERENCE
+        "Sections 4.6.11 and 4.6.12 of CAPWAP Protocol Specification,
+         RFC 5415."
+    ::= { capwapBaseWtpStateEntry 5 }
+
+capwapBaseWtpStateWtpBaseMacAddress  OBJECT-TYPE
+    SYNTAX      PhysAddress (SIZE(6|8))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the WTP's Base MAC Address, which MAY be
+         assigned to the primary Ethernet interface.
+         The instance of the object corresponds to the Base MAC Address
+         sub-element in the CAPWAP protocol [RFC5415]."
+    REFERENCE
+        "Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpStateEntry 6 }
+
+capwapBaseWtpState  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  dtls(1),
+                  join(2),
+                  image(3),
+                  configure(4),
+                  dataCheck(5),
+                  run(6),
+                  reset(7),
+                  dtlsTeardown(8),
+                  unknown(9)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the various possibilities of the AC's CAPWAP FSM
+         state for each WTP.
+         The following enumerated values are supported:
+           dtls(1)         - DTLS negotiation states, which include
+                             DTLS setup, authorize, DTLS connect
+           join(2)         - The WTP is joining with the AC
+           image(3)        - The WTP is downloading software
+           configure(4)    - The WTP is getting configuration from
+                             the AC
+           dataCheck(5)    - The AC is waiting for the Data Channel Keep
+                             Alive Packet
+           run(6)          - The WTP enters the running state
+           reset(7)        - The AC transmits a reset request message
+                             to the WTP
+           dtlsTeardown(8) - DTLS session is torn down
+           unknown(9)      - Operator already prepared configuration
+                             for the WTP, while the WTP has not
+                             contacted the AC until now"
+    REFERENCE
+        "Section 2.3.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpStateEntry 7 }
+
+capwapBaseWtpStateWtpUpTime  OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the time (in hundredths of a second) since the
+         WTP has been in the running state (corresponding to the
+         value run(6) of capwapBaseWtpState)."
+    ::= { capwapBaseWtpStateEntry 8 }
+
+capwapBaseWtpStateWtpCurrWtpProfileId OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpProfileIdTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the current identifier of a WTP profile.
+         The operator could query a WTP's current configuration
+         with the identifier of a WTP profile."
+    ::= { capwapBaseWtpStateEntry 9 }
+
+-- End of capwapBaseWtpStateTable Table
+
+-- capwapBaseWtpTable Table
+
+capwapBaseWtpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseWtpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that display properties of the WTPs
+         in running state."
+    ::= { capwapBaseWtps 3 }
+
+capwapBaseWtpEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that displays properties of the WTPs
+         in running state."
+    INDEX { capwapBaseWtpCurrId }
+    ::= { capwapBaseWtpTable 1 }
+
+CapwapBaseWtpEntry ::= SEQUENCE {
+      capwapBaseWtpCurrId                       CapwapBaseWtpIdTC,
+      capwapBaseWtpPhyIndex                     PhysicalIndex,
+      capwapBaseWtpBaseMacAddress               PhysAddress,
+      capwapBaseWtpTunnelModeOptions            CapwapBaseTunnelModeTC,
+      capwapBaseWtpMacTypeOptions               CapwapBaseMacTypeTC,
+      capwapBaseWtpDiscoveryType                INTEGER,
+      capwapBaseWtpRadiosInUseNum               Gauge32,
+      capwapBaseWtpRadioNumLimit                Unsigned32,
+      capwapBaseWtpRetransmitCount              Counter32
+    }
+
+capwapBaseWtpCurrId OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpIdTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP in running state."
+    ::= { capwapBaseWtpEntry 1 }
+
+capwapBaseWtpPhyIndex OBJECT-TYPE
+    SYNTAX      PhysicalIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique physical index of a physical entity
+         in the ENTITY-MIB module [RFC4133].
+         Information about a specific WTP such as its software version
+         could be accessed through this index."
+    ::= { capwapBaseWtpEntry 2 }
+
+capwapBaseWtpBaseMacAddress  OBJECT-TYPE
+    SYNTAX      PhysAddress (SIZE(6|8))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the WTP's Base MAC Address, which MAY be assigned
+         to the primary Ethernet interface.
+         The instance of the object corresponds to the Base MAC Address
+         sub-element in the CAPWAP protocol [RFC5415]."
+    REFERENCE
+        "Section 4.6.40 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 3 }
+
+capwapBaseWtpTunnelModeOptions  OBJECT-TYPE
+    SYNTAX      CapwapBaseTunnelModeTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the tunneling modes of operation supported by
+         the WTP."
+    REFERENCE
+        "Section 4.6.43 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 4 }
+
+capwapBaseWtpMacTypeOptions  OBJECT-TYPE
+    SYNTAX      CapwapBaseMacTypeTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the MAC mode of operation supported by the WTP."
+    REFERENCE
+        "Section 4.6.44 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 5 }
+
+capwapBaseWtpDiscoveryType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unknown(0),
+                  staticConfig(1),
+                  dhcp(2),
+                  dns(3),
+                  acRef(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents how the WTP discovers the AC.
+         The following enumerated values are supported:
+           unknown(0)      - Unknown
+           staticConfig(1) - Static configuration
+           dhcp(2)         - DHCP
+           dns(3)          - DNS
+           acRef(4)        - AC referral
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object
+         follows that rule."
+    REFERENCE
+        "Section 4.6.21 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 6 }
+
+capwapBaseWtpRadiosInUseNum OBJECT-TYPE
+    SYNTAX      Gauge32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of radios in use on the WTP."
+    REFERENCE
+        "Section 4.6.41 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 7 }
+
+capwapBaseWtpRadioNumLimit OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum radio number supported by the WTP."
+    REFERENCE
+        "Section 4.6.41 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 8 }
+
+capwapBaseWtpRetransmitCount OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "retransmissions"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of retransmissions for a given
+         CAPWAP packet."
+    REFERENCE
+        "Section 4.8.8 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEntry 9 }
+
+-- End of capwapBaseWtpTable table
+
+-- capwapBaseWirelessBindingTable Table
+
+capwapBaseWirelessBindingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseWirelessBindingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that display the mappings between
+         WTP Virtual Radio Interfaces and PHY radios, and the
+         wireless binding type for each PHY radio.
+         As capwapBaseWirelessBindingTable stores the mappings between
+         PHY radios (Radio IDs) and the ifIndexes of WTP Virtual Radio
+         Interfaces, the operator can get the ifIndex information by
+         querying this table.  Such a query operation SHOULD run from
+         radio ID 1 to radio ID 31 according to [RFC5415],
+         and stop when an invalid ifIndex value (0) is returned.
+         Values of all objects in this table are persistent at
+         restart/reboot."
+    ::= { capwapBaseWtps 4 }
+
+capwapBaseWirelessBindingEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseWirelessBindingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that displays the mapping between
+         a specific WTP Virtual Radio Interface and a PHY
+         radio, and the wireless binding type for the PHY radio."
+    INDEX {
+      capwapBaseWtpProfileId,
+      capwapBaseWirelessBindingRadioId
+    }
+    ::= { capwapBaseWirelessBindingTable 1 }
+
+CapwapBaseWirelessBindingEntry ::= SEQUENCE {
+      capwapBaseWirelessBindingRadioId              CapwapBaseRadioIdTC,
+      capwapBaseWirelessBindingVirtualRadioIfIndex  InterfaceIndex,
+      capwapBaseWirelessBindingType                 INTEGER
+    }
+
+capwapBaseWirelessBindingRadioId OBJECT-TYPE
+    SYNTAX      CapwapBaseRadioIdTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the identifier of a PHY radio on a WTP, which
+         is required to be unique on a WTP.
+         For example, WTP A and WTP B use a same value of
+         capwapBaseWirelessBindingRadioId for their first radio."
+    REFERENCE
+        "Section 4.3 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWirelessBindingEntry 1 }
+
+capwapBaseWirelessBindingVirtualRadioIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the index value that uniquely identifies a
+         WLAN Virtual Radio Interface.  The interface identified by
+         a particular value of this index is the same interface as
+         identified by the same value of the ifIndex.
+         Before WTPs contact the AC to get configuration,
+         the operator configures WTP profiles for them.
+         The creation of a WTP profile triggers the system to
+         automatically create a specific number of WTP Virtual Radio
+         Interfaces and add a new row object in the
+         capwapBaseWirelessBindingTable without manual intervention.
+         As most MIB modules use the ifIndex to identify an interface
+         for configuration and statistical data (for example, the IEEE
+         802.11 MIB module [IEEE.802-11.2007]), it will be easy to
+         reuse other wireless binding MIB modules through the WTP
+         Virtual Radio Interface in the Centralized WLAN
+         Architecture."
+    ::= { capwapBaseWirelessBindingEntry 2 }
+
+capwapBaseWirelessBindingType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  dot11(1),
+                  epc(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the wireless binding type for the radio.
+         The following enumerated values are supported:
+           dot11(1) - IEEE 802.11
+           epc(3)   - EPCGlobal"
+    REFERENCE
+        "Section 4.3 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWirelessBindingEntry 3 }
+
+-- End of capwapBaseWirelessBindingTable Table
+
+-- capwapBaseStationTable Table
+
+capwapBaseStationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseStationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that display stations that are accessing
+         the wireless service provided by the AC."
+    REFERENCE
+        "Section 4.6.8 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtps 5 }
+
+capwapBaseStationEntry OBJECT-TYPE
+    SYNTAX      CapwapBaseStationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that displays a station that is
+         associated with the specific radio on the WTP.
+         Note that in some cases such as roaming that a station may
+         simultaneously associate with two WTPs for some (short) time.
+         The MIB implementation MUST ensure there is only one valid
+         and meaningful entry for a specific station."
+    INDEX { capwapBaseStationId }
+    ::= { capwapBaseStationTable 1 }
+
+CapwapBaseStationEntry ::= SEQUENCE {
+      capwapBaseStationId            CapwapBaseStationIdTC,
+      capwapBaseStationWtpId         CapwapBaseWtpIdTC,
+      capwapBaseStationWtpRadioId    CapwapBaseRadioIdTC,
+      capwapBaseStationAddedTime     DateAndTime,
+      capwapBaseStationVlanName      SnmpAdminString
+    }
+
+capwapBaseStationId OBJECT-TYPE
+    SYNTAX      CapwapBaseStationIdTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of the station."
+    REFERENCE
+        "Section 4.6.8 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseStationEntry 1 }
+
+capwapBaseStationWtpId OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpIdTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP in running state."
+    ::= { capwapBaseStationEntry 2 }
+
+capwapBaseStationWtpRadioId OBJECT-TYPE
+    SYNTAX      CapwapBaseRadioIdTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the identifier of a PHY radio on a WTP, which
+         is required to be unique on a WTP.
+         For example, WTP A and WTP B use a same value of
+         capwapBaseStationWtpRadioId for their first radio."
+    REFERENCE
+        "Section 4.3 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseStationEntry 3 }
+
+capwapBaseStationAddedTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the time when the station is added."
+    REFERENCE
+        "Section 4.6.8 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseStationEntry 4 }
+
+capwapBaseStationVlanName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents VLAN name to which the station is associated."
+    REFERENCE
+        "Section 4.6.8 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseStationEntry 5 }
+
+-- End of capwapBaseStationTable Table
+
+--  capwapBaseWtpEventsStatsTable
+
+capwapBaseWtpEventsStatsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseWtpEventsStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that display the WTPs' events statistics."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtps 6 }
+
+capwapBaseWtpEventsStatsEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpEventsStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that displays the events statistics
+         of a WTP."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    INDEX { capwapBaseWtpCurrId }
+    ::= { capwapBaseWtpEventsStatsTable 1 }
+
+CapwapBaseWtpEventsStatsEntry ::= SEQUENCE {
+      capwapBaseWtpEventsStatsRebootCount            Counter32,
+      capwapBaseWtpEventsStatsInitCount              Counter32,
+      capwapBaseWtpEventsStatsLinkFailureCount       Counter32,
+      capwapBaseWtpEventsStatsSwFailureCount         Counter32,
+      capwapBaseWtpEventsStatsHwFailureCount         Counter32,
+      capwapBaseWtpEventsStatsOtherFailureCount      Counter32,
+      capwapBaseWtpEventsStatsUnknownFailureCount    Counter32,
+      capwapBaseWtpEventsStatsLastFailureType        INTEGER
+    }
+
+capwapBaseWtpEventsStatsRebootCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of reboots that have occurred due to a
+         WTP crash.
+
+         Note that the CAPWAP field [RFC5415] modeled by this counter
+         takes the value 65535 to indicate that the information is not
+         available on the WTP.  This MIB object does not follow this
+         behavior, which would not be standard in SMIv2.  If the WTP
+         does not have the information, the agent will not instantiate
+         the object."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 1 }
+
+capwapBaseWtpEventsStatsInitCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of reboots that have occurred at the
+         request of a CAPWAP protocol message, such as a change in
+         configuration that requires a reboot or an explicit CAPWAP
+         protocol reset request.
+         Note that the CAPWAP field [RFC5415] modeled by this counter
+         takes the value 65535 to indicate that the information is not
+         available on the WTP.  This MIB object does not follow this
+         behavior, which would not be standard in SMIv2.  If the WTP
+         does not have the information, the agent will not instantiate
+         the object."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 2 }
+
+capwapBaseWtpEventsStatsLinkFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that a CAPWAP protocol
+         connection with an AC has failed due to link failures."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 3 }
+
+capwapBaseWtpEventsStatsSwFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that a CAPWAP protocol
+         connection with an AC has failed due to software-related
+         reasons."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 4 }
+
+capwapBaseWtpEventsStatsHwFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that a CAPWAP protocol
+         connection with an AC has failed due to hardware-related
+         reasons."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 5 }
+
+capwapBaseWtpEventsStatsOtherFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that a CAPWAP protocol
+         connection with an AC has failed due to known reasons, other
+         than the AC-initiated, link, software or hardware failures."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 6 }
+
+capwapBaseWtpEventsStatsUnknownFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that a CAPWAP protocol
+         connection with an AC has failed for unknown reasons."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 7 }
+
+capwapBaseWtpEventsStatsLastFailureType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unsupported(0),
+                  acInit(1),
+                  linkFailure(2),
+                  swFailure(3),
+                  hwFailure(4),
+                  otherFailure(5),
+                  unknown(255)
+
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the failure type of the most recent WTP failure.
+         The following enumerated values are supported:
+           unsupported(0)  - Not supported
+           acInit(1)       - The AC initiated
+           linkFailure(2)  - Link failure
+           swFailure(3)    - Software failure
+           hwFailure(4)    - Hardware failure
+           otherFailure(5) - Other failure
+           unknown(255)    - Unknown (e.g., WTP doesn't keep track
+                             of info)
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object
+         follows that rule."
+    REFERENCE
+        "Section 4.6.47 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtpEventsStatsEntry 8 }
+
+--  End of capwapBaseWtpEventsStatsTable table
+
+--  capwapBaseRadioEventsStatsTable table
+
+capwapBaseRadioEventsStatsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapBaseRadioEventsStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that display statistics on the radios'
+         behaviors and reasons why the WTP radio has been reset.
+         To get the events statistics of all radios on a specific WTP
+         (identified by the capwapBaseWtpCurrId), a query
+         operation SHOULD run from radio ID 1 to radio ID 31 until there
+         is no data returned.  The radio ID here corresponds to the
+         object capwapBaseRadioEventsWtpRadioId.  If the previous MIB
+         operations such as query on the capwapBaseWirelessBindingTable
+         know the exact value of each radio ID, the query operation on
+         the capwapBaseRadioEventsStatsTable could use that value
+         of Radio IDs."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseWtps 7 }
+
+capwapBaseRadioEventsStatsEntry  OBJECT-TYPE
+    SYNTAX      CapwapBaseRadioEventsStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that displays the statistical data of
+         events that happened on a specific radio of a WTP."
+    INDEX { capwapBaseWtpCurrId, capwapBaseRadioEventsWtpRadioId }
+    ::= { capwapBaseRadioEventsStatsTable 1 }
+
+CapwapBaseRadioEventsStatsEntry ::= SEQUENCE {
+      capwapBaseRadioEventsWtpRadioId             CapwapBaseRadioIdTC,
+      capwapBaseRadioEventsStatsResetCount             Counter32,
+      capwapBaseRadioEventsStatsSwFailureCount         Counter32,
+      capwapBaseRadioEventsStatsHwFailureCount         Counter32,
+      capwapBaseRadioEventsStatsOtherFailureCount      Counter32,
+      capwapBaseRadioEventsStatsUnknownFailureCount    Counter32,
+      capwapBaseRadioEventsStatsConfigUpdateCount      Counter32,
+      capwapBaseRadioEventsStatsChannelChangeCount     Counter32,
+      capwapBaseRadioEventsStatsBandChangeCount        Counter32,
+      capwapBaseRadioEventsStatsCurrNoiseFloor         Integer32,
+      capwapBaseRadioEventsStatsDecryptErrorCount      Counter32,
+      capwapBaseRadioEventsStatsLastFailureType        INTEGER
+    }
+
+capwapBaseRadioEventsWtpRadioId OBJECT-TYPE
+     SYNTAX      CapwapBaseRadioIdTC
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Represents the identifier of a PHY radio on a WTP, which
+          is required to be unique on a WTP.
+          For example, WTP A and WTP B use the same value of
+          capwapBaseRadioEventsWtpRadioId for their first radio."
+     REFERENCE
+         "Section 4.3 of CAPWAP Protocol Specification, RFC 5415."
+     ::= { capwapBaseRadioEventsStatsEntry 1 }
+
+capwapBaseRadioEventsStatsResetCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio has been
+         reset."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 2 }
+
+capwapBaseRadioEventsStatsSwFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio has failed due
+         to software-related reasons."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 3 }
+
+capwapBaseRadioEventsStatsHwFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio has failed due
+         to hardware-related reasons."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 4 }
+
+capwapBaseRadioEventsStatsOtherFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio has failed due to
+         known reasons, other than software or hardware failure."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 5 }
+
+capwapBaseRadioEventsStatsUnknownFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio has failed for
+         unknown reasons."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 6 }
+
+capwapBaseRadioEventsStatsConfigUpdateCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio configuration has
+         been updated."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 7 }
+
+capwapBaseRadioEventsStatsChannelChangeCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio channel has
+         been changed."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 8 }
+
+capwapBaseRadioEventsStatsBandChangeCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of times that the radio has changed
+         frequency bands."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 9 }
+
+capwapBaseRadioEventsStatsCurrNoiseFloor OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the noise floor of the radio receiver in units of
+         dBm."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 10 }
+
+capwapBaseRadioEventsStatsDecryptErrorCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of decryption errors that have occurred
+         on the WTP.  Note that this field is only valid in cases where
+         the WTP provides encryption/decryption services."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 11 }
+
+capwapBaseRadioEventsStatsLastFailureType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unsupported(0),
+                  swFailure(1),
+                  hwFailure(2),
+                  otherFailure(3),
+                  unknown(255)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the failure type of the most recent radio failure.
+         The following enumerated values are supported:
+           unsupported(0)  - Not supported
+           swFailure(1)    - Software failure
+           hwFailure(2)    - Hardware failure
+           otherFailure(3) - Other failure
+           unknown(255)    - Unknown
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object follows
+         that rule."
+    REFERENCE
+        "Section 4.6.46 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseRadioEventsStatsEntry 12 }
+
+--  End of capwapBaseRadioEventsStatsTable table
+
+-- End of WTP Objects Group
+
+-- CAPWAP Base Parameters Group
+
+capwapBaseParameters OBJECT IDENTIFIER
+    ::= { capwapBaseObjects 3 }
+
+capwapBaseAcMaxRetransmit OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum number of retransmissions for a given
+         CAPWAP packet before the link layer considers the peer dead.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.8.7 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 5 }
+    ::= { capwapBaseParameters 1 }
+
+capwapBaseAcChangeStatePendingTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum time, in seconds, the AC will wait
+         for the Change State Event Request from the WTP after having
+         transmitted a successful Configuration Status Response
+         message.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.1 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 25 }
+    ::= { capwapBaseParameters 2 }
+
+capwapBaseAcDataCheckTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents The number of seconds the AC will wait for
+         the Data Channel Keep Alive, which is required by the
+         CAPWAP state machine's Data Check state.
+         The AC resets the state machine if this timer expires
+         prior to transitioning to the next state.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.4 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 30 }
+    ::= { capwapBaseParameters 3 }
+
+capwapBaseAcDTLSSessionDeleteTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the minimum time, in seconds, the AC MUST wait
+         for DTLS session deletion.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.6 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 5 }
+    ::= { capwapBaseParameters 4 }
+
+capwapBaseAcEchoInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the minimum time, in seconds, between sending Echo
+         Request messages to the AC with which the WTP has joined.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.7 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 30 }
+    ::= { capwapBaseParameters 5 }
+
+capwapBaseAcRetransmitInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the minimum time, in seconds, in which a
+         non-acknowledged CAPWAP packet will be retransmitted.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.12 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 3 }
+    ::= { capwapBaseParameters 6 }
+
+capwapBaseAcSilentInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the minimum time, in seconds, during which the AC
+         SHOULD ignore all CAPWAP and DTLS packets received from the
+         WTP that is in the Sulking state.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.13 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 30 }
+    ::= { capwapBaseParameters 7 }
+
+capwapBaseAcWaitDTLSTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (30..4294967295)
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum time, in seconds, the AC MUST wait
+         without having received a DTLS Handshake message from an AC.
+         This timer MUST be greater than 30 seconds.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.15 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 60 }
+    ::= { capwapBaseParameters 8 }
+
+capwapBaseAcWaitJoinTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (20..4294967295)
+    UNITS       "second"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the maximum time, in seconds, the AC will wait
+         after the DTLS session has been established until it receives
+         the Join Request from the WTP.  This timer MUST be greater
+         than 20 seconds.
+         The value of the object is persistent at restart/reboot."
+    REFERENCE
+        "Section 4.7.16 of CAPWAP Protocol Specification, RFC 5415."
+    DEFVAL { 60 }
+    ::= { capwapBaseParameters 9 }
+
+capwapBaseAcEcnSupport OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  limited(0),
+                  fullAndLimited(1)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents the support for the Explicit Congestion Notification
+         (ECN) bits, as defined in [RFC3168].
+         The value of the object is persistent at restart/reboot.
+         The following enumerated values are supported:
+           limited(0)        - Limited ECN support
+           fullAndLimited(1) - Full and limited ECN support
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object follows
+         that rule."
+    REFERENCE
+        "Section 4.6.25 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseParameters 10 }
+
+-- End of CAPWAP Base Parameters Group
+
+-- CAPWAP Statistics Group
+
+capwapBaseStats OBJECT IDENTIFIER
+    ::= { capwapBaseObjects 4 }
+
+capwapBaseFailedDTLSAuthFailureCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of failed DTLS session establishment
+         attempts due to authentication failures."
+    REFERENCE
+        "Section 4.8.3 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseStats 1 }
+
+capwapBaseFailedDTLSSessionCount OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the number of failed DTLS session
+         establishment attempts."
+    REFERENCE
+        "Section 4.8.4 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseStats 2 }
+
+-- Notifications
+
+capwapBaseChannelUp NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfChannelType,
+                  capwapBaseNtfAuthenMethod
+                }
+    STATUS      current
+    DESCRIPTION
+        "This notification is sent by the AC when a CAPWAP channel
+         is established.
+         The notification is separated for data or control channel."
+    ::= { capwapBaseNotifications 1 }
+
+capwapBaseChannelDown NOTIFICATION-TYPE
+
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfChannelType,
+                  capwapBaseNtfChannelDownReason
+                }
+    STATUS      current
+    DESCRIPTION
+        "This notification is sent by the AC when a CAPWAP channel
+         is down.
+         The notification is separated for data or control channel."
+    ::= { capwapBaseNotifications 2 }
+
+capwapBaseDecryptErrorReport NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfRadioId,
+                  capwapBaseNtfStationIdList
+                }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated when a WTP has had a
+         decryption error since the last report."
+    REFERENCE
+        "Section 4.6.17 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifications 3 }
+
+capwapBaseJoinFailure NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfJoinFailureReason
+                }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated when a WTP fails to join."
+    REFERENCE
+        "Section 4.6.35 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifications 4 }
+
+capwapBaseImageUpgradeFailure NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfImageFailureReason
+                }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated when a WTP fails to update
+         the firmware image."
+    REFERENCE
+        "Section 4.6.35 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifications 5 }
+
+capwapBaseConfigMsgError NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfConfigMsgErrorType,
+                  capwapBaseNtfMsgErrorElements
+                }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated when a WTP receives message
+         elements in the configuration management messages that it
+         is unable to apply locally."
+    REFERENCE
+        "Section 4.6.35 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifications 6 }
+
+capwapBaseRadioOperableStatus NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfRadioId,
+                  capwapBaseNtfRadioOperStatusFlag,
+                  capwapBaseNtfRadioStatusCause
+                }
+    STATUS      current
+    DESCRIPTION
+        "The notification is generated when a radio's operational state
+         has changed."
+    REFERENCE
+        "Section 4.6.34 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifications 7 }
+
+capwapBaseAuthenFailure NOTIFICATION-TYPE
+    OBJECTS     {
+                  capwapBaseNtfWtpId,
+                  capwapBaseNtfChannelType,
+                  capwapBaseNtfAuthenMethod,
+                  capwapBaseNtfAuthenFailureReason
+                }
+    STATUS      current
+    DESCRIPTION
+        "This is notification of an authentication failure event
+         and provides the reason for it."
+    ::= { capwapBaseNotifications 8 }
+
+-- Objects used only in notifications
+
+-- Notification Objects
+capwapBaseNotifyVarObjects OBJECT IDENTIFIER
+    ::= { capwapBaseObjects 5 }
+
+capwapBaseNtfWtpId OBJECT-TYPE
+    SYNTAX      CapwapBaseWtpIdTC
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WTP."
+    ::= { capwapBaseNotifyVarObjects 1 }
+
+capwapBaseNtfRadioId OBJECT-TYPE
+    SYNTAX      CapwapBaseRadioIdTC
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the identifier of a PHY radio on a WTP, which is
+         only required to be unique on a WTP.
+         For example, WTP A and WTP B can use the same value of
+         capwapBaseNtfRadioId for their first radio."
+    REFERENCE
+        "Section 4.3 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 2 }
+
+capwapBaseNtfChannelType OBJECT-TYPE
+    SYNTAX      CapwapBaseChannelTypeTC
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the channel type for the CAPWAP protocol."
+    ::= { capwapBaseNotifyVarObjects 3 }
+
+capwapBaseNtfAuthenMethod OBJECT-TYPE
+    SYNTAX      CapwapBaseAuthenMethodTC
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the authentication method for the CAPWAP Channel."
+    ::= { capwapBaseNotifyVarObjects 4 }
+
+capwapBaseNtfChannelDownReason OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  timeout(1),
+                  rekeyFailure(2),
+                  acRebootWtp(3),
+                  dtlsError(4),
+                  maxRetransmit(5)
+
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the reason the channel is down.
+         The following enumerated values are supported:
+           timeout(1)       - The keepalive timed out
+           rekeyFailure(2)  - Rekey process failed; channel will be
+                              broken
+           acRebootWtp(3)   - The AC rebooted the WTP
+           dtlsError(4)     - DTLS notifications: DTLSAborted,
+                              DTLSReassemblyFailure, DTLSPeerDisconnect,
+                              or frequent DTLSDecapFailure
+           maxRetransmit(5) - The underlying reliable transport's
+                              RetransmitCount counter has reached the
+                              MaxRetransmit variable"
+    ::= { capwapBaseNotifyVarObjects 5 }
+
+capwapBaseNtfStationIdList OBJECT-TYPE
+    SYNTAX      LongUtf8String (SIZE (6..1024))
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents a list of station MAC addresses separated by
+         semicolons."
+    REFERENCE
+        "Section 4.6.17 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 6 }
+
+capwapBaseNtfAuthenFailureReason OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  keyMismatch(1),
+                  invalidCert(2),
+                  reassemblyFailure(3),
+                  decapFailure(4),
+                  encapFailure(5),
+                  timeout(6),
+                  unknown(8)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the reason for WTP authorization failure.
+         The following enumerated values are supported:
+           keyMismatch(1)       - WTP's and AC's keys did not match
+           invalidCert(2)       - Certification is not valid
+           reassemblyFailure(3) - Fragment reassembly failure
+           decapFailure(4)      - Decapsulation error
+
+           encapFailure(5)      - Encapsulation error
+           timeout(6)           - WaitDTLS timer timeout
+           unknown(8)           - Unknown reason"
+    REFERENCE
+        "Section 2.3.1 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 7 }
+
+capwapBaseNtfRadioOperStatusFlag OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  operable(0),
+                  inoperable(1)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the operation status of a radio.
+         The following enumerated values are supported:
+           operable(0)   - The radio is operable
+           inoperable(1) - The radio is inoperable, and the
+                           capwapBaseNtfRadioStatusCause object
+                           gives the reason in detail
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object
+         follows that rule."
+    REFERENCE
+        "Section 4.6.34 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 8 }
+
+capwapBaseNtfRadioStatusCause OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  normal(0),
+                  hwError(1),
+                  swError(2),
+                  adminSet(3)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the reason why the radio is out of service.
+         The following enumerated values are supported:
+           normal(0)   - Normal status
+           hwError(1)  - Radio failure
+           swError(2)  - Software failure
+           adminSet(3) - Administratively set
+         Note that the CAPWAP field [RFC5415] modeled by this
+         object takes zero as starting value; this MIB object
+         follows that rule."
+    REFERENCE
+        "Section 4.6.34 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 9 }
+
+capwapBaseNtfJoinFailureReason  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unspecified(1),
+                  resDepletion(2),
+                  unknownSource(3),
+                  incorrectData(4),
+                  sessionIdInUse(5),
+                  unsupportedHw(6),
+                  unsupportedBinding(7)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the reason of join failure.
+         The following enumerated values are supported:
+           unspecified(1)        - Unspecified failure
+           resDepletion(2)       - Resource depletion
+           unknownSource(3)      - Unknown source
+           incorrectData(4)      - Incorrect data
+           sessionIdInUse(5)     - Session ID already in use
+           unsupportedHw(6)      - WTP hardware not supported
+           unsupportedBinding(7) - Binding not supported"
+    REFERENCE
+        "Section 4.6.35 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 10 }
+
+capwapBaseNtfImageFailureReason  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  invalidChecksum(1),
+                  invalidLength(2),
+                  other(3),
+                  inStorage(4)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the reason of image failure.
+         The following enumerated values are supported:
+           invalidChecksum(1) - Invalid checksum
+           invalidLength(2)   - Invalid data length
+           other(3)           - Other error
+           inStorage(4)       - Image already present"
+    REFERENCE
+        "Section 4.6.35 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 11 }
+
+capwapBaseNtfConfigMsgErrorType  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unknownElement(1),
+                  unsupportedElement(2),
+                  unknownValue(3),
+                  unsupportedValue(4)
+                }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the type of configuration message error.
+         The following enumerated values are supported:
+           unknownElement(1)     - Unknown message element
+           unsupportedElement(2) - Unsupported message element
+           unknownValue(3)       - Unknown message element value
+           unsupportedValue(4)   - Unsupported message element value"
+    REFERENCE
+        "Section 4.6.36 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 12 }
+
+capwapBaseNtfMsgErrorElements  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Represents the message elements sent by the AC in the
+         Configuration Status Response message that caused the error."
+    REFERENCE
+        "Section 4.6.36 of CAPWAP Protocol Specification, RFC 5415."
+    ::= { capwapBaseNotifyVarObjects 13 }
+
+-- Notification Control
+capwapBaseNotifyControlObjects OBJECT IDENTIFIER
+    ::= { capwapBaseObjects 6 }
+
+capwapBaseChannelUpDownNotifyEnable  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the Channel Up / Channel Down notification
+         should be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { false }
+    ::= { capwapBaseNotifyControlObjects 1 }
+
+capwapBaseDecryptErrorNotifyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the decryption error notification should
+         be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { true }
+    ::= { capwapBaseNotifyControlObjects 2 }
+
+capwapBaseJoinFailureNotifyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the notification of a WTP join failure
+         should be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { true }
+    ::= { capwapBaseNotifyControlObjects 3 }
+
+capwapBaseImageUpgradeFailureNotifyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the notification of a WTP image upgrade
+         failure should be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { true }
+    ::= { capwapBaseNotifyControlObjects 4 }
+
+capwapBaseConfigMsgErrorNotifyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the notification of configuration message
+         error should be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { false }
+    ::= { capwapBaseNotifyControlObjects 5 }
+
+capwapBaseRadioOperableStatusNotifyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the notification of a radio's operational
+         state change should be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { false }
+    ::= { capwapBaseNotifyControlObjects 6 }
+
+capwapBaseAuthenFailureNotifyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the notification of authentication failure
+         should be generated.
+         A value of true(1) means that the notification is enabled.
+         A value of false(2) means that the notification is disabled.
+         The value of the object is persistent at restart/reboot."
+    DEFVAL { true }
+    ::= { capwapBaseNotifyControlObjects 7 }
+
+-- Module compliance
+
+capwapBaseCompliances OBJECT IDENTIFIER
+    ::= { capwapBaseConformance 1 }
+
+capwapBaseGroups OBJECT IDENTIFIER
+    ::= { capwapBaseConformance 2 }
+
+capwapBaseCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "Describes the requirements for conformance to the
+        CAPWAP-BASE-MIB module."
+
+    MODULE IF-MIB -- The Interfaces MIB, RFC 2863
+    MANDATORY-GROUPS {
+       ifGeneralInformationGroup
+    }
+
+    MODULE -- this module
+     MANDATORY-GROUPS {
+       capwapBaseAcNodeGroup,
+       capwapBaseWtpProfileGroup,
+       capwapBaseWtpStateGroup,
+       capwapBaseWtpGroup,
+       capwapBaseRadioGroup,
+       capwapBaseStationGroup
+     }
+
+     GROUP capwapBaseAcNodeGroup2
+     DESCRIPTION
+         "The capwapBaseAcNodeGroup2 group is optional."
+
+     GROUP capwapBaseAcNameListGroup
+     DESCRIPTION
+         "The capwapBaseAcNameListGroup group is optional."
+
+     GROUP capwapBaseMacAclsGroup
+     DESCRIPTION
+         "The capwapBaseMacAclsGroup group is optional."
+
+     GROUP capwapBaseWtpProfileGroup2
+     DESCRIPTION
+         "The capwapBaseWtpProfileGroup2 group is optional."
+
+     GROUP capwapBaseWtpGroup2
+     DESCRIPTION
+         "The capwapBaseWtpGroup2 group is optional."
+
+     GROUP capwapBaseWtpEventsStatsGroup
+     DESCRIPTION
+         "The capwapBaseWtpEventsStatsGroup group is optional."
+
+     GROUP capwapBaseRadioEventsStatsGroup
+     DESCRIPTION
+         "The capwapBaseRadioEventsStatsGroup group is optional."
+
+     GROUP capwapBaseParametersGroup
+     DESCRIPTION
+         "The capwapBaseParametersGroup group is optional."
+
+     GROUP capwapBaseStatsGroup
+     DESCRIPTION
+         "The capwapBaseStatsGroup group is optional."
+
+     GROUP capwapBaseNotificationsGroup
+     DESCRIPTION
+          "The capwapBaseNotificationsGroup group is optional."
+
+     GROUP capwapBaseNotifyVarsGroup
+     DESCRIPTION
+         "The capwapBaseNotifyVarsGroup group is optional.
+          If capwapBaseNotificationsGroup is supported,
+          this group must be implemented."
+
+     GROUP capwapBaseNotifyControlGroup
+     DESCRIPTION
+        "The capwapBaseNotifyControlGroup group is optional.
+         If capwapBaseNotificationsGroup is supported,
+         this group must be implemented."
+     ::= { capwapBaseCompliances 1 }
+
+capwapBaseAcNodeGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpSessions,
+      capwapBaseWtpSessionsLimit,
+      capwapBaseStationSessions,
+      capwapBaseStationSessionsLimit
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to represent
+         the basic properties of the AC from the CAPWAP
+         protocol perspective."
+    ::= { capwapBaseGroups 1 }
+
+capwapBaseAcNodeGroup2   OBJECT-GROUP
+    OBJECTS {
+      capwapBaseDataChannelDTLSPolicyOptions,
+      capwapBaseControlChannelAuthenOptions
+     }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to represent
+         the other properties (such as security) of the AC from
+         the CAPWAP protocol perspective."
+    ::= { capwapBaseGroups 2 }
+
+capwapBaseAcNameListGroup  OBJECT-GROUP
+    OBJECTS {
+      capwapBaseAcNameListName,
+      capwapBaseAcNameListPriority,
+      capwapBaseAcNameListRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to configure
+         the AC name list."
+    ::= { capwapBaseGroups 3 }
+
+capwapBaseMacAclsGroup  OBJECT-GROUP
+    OBJECTS {
+      capwapBaseMacAclStationId,
+      capwapBaseMacAclRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to configure
+         the stations ACL."
+    ::= { capwapBaseGroups 4 }
+
+capwapBaseWtpProfileGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpProfileName,
+      capwapBaseWtpProfileWtpMacAddress,
+      capwapBaseWtpProfileWtpModelNumber,
+      capwapBaseWtpProfileWtpName,
+      capwapBaseWtpProfileWtpLocation,
+      capwapBaseWtpProfileRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to configure
+         the WTP profile."
+    ::= { capwapBaseGroups 5 }
+
+capwapBaseWtpProfileGroup2    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpProfileWtpStaticIpEnable,
+      capwapBaseWtpProfileWtpStaticIpType,
+      capwapBaseWtpProfileWtpStaticIpAddress,
+      capwapBaseWtpProfileWtpNetmask,
+      capwapBaseWtpProfileWtpGateway,
+      capwapBaseWtpProfileWtpFallbackEnable,
+      capwapBaseWtpProfileWtpEchoInterval,
+      capwapBaseWtpProfileWtpIdleTimeout,
+      capwapBaseWtpProfileWtpMaxDiscoveryInterval,
+      capwapBaseWtpProfileWtpReportInterval,
+      capwapBaseWtpProfileWtpStatisticsTimer,
+      capwapBaseWtpProfileWtpEcnSupport
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of optional objects that is used to
+         configure the WTP profile."
+    ::= { capwapBaseGroups 6 }
+
+capwapBaseWtpStateGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpStateWtpIpAddressType,
+      capwapBaseWtpStateWtpIpAddress,
+      capwapBaseWtpStateWtpLocalIpAddressType,
+      capwapBaseWtpStateWtpLocalIpAddress,
+      capwapBaseWtpStateWtpBaseMacAddress,
+      capwapBaseWtpState,
+      capwapBaseWtpStateWtpUpTime,
+      capwapBaseWtpStateWtpCurrWtpProfileId
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to represent
+         the WTP's state information."
+    ::= { capwapBaseGroups 7 }
+
+capwapBaseWtpGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpBaseMacAddress,
+      capwapBaseWtpTunnelModeOptions,
+      capwapBaseWtpMacTypeOptions,
+      capwapBaseWtpDiscoveryType,
+      capwapBaseWtpRadiosInUseNum,
+      capwapBaseWtpRadioNumLimit
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to represent
+         the properties information for the WTPs in running state."
+    ::= { capwapBaseGroups 8 }
+
+capwapBaseWtpGroup2   OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpPhyIndex,
+      capwapBaseWtpRetransmitCount
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of optional objects that is used to represent
+         the properties of the WTPs in running state."
+    ::= { capwapBaseGroups 9 }
+
+capwapBaseRadioGroup    OBJECT-GROUP
+
+    OBJECTS {
+      capwapBaseWirelessBindingVirtualRadioIfIndex,
+      capwapBaseWirelessBindingType
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to represent
+         the wireless binding type and the mappings between the
+         ifIndexes of WLAN Virtual Radio Interfaces and PHY radios."
+    ::= { capwapBaseGroups 10 }
+
+capwapBaseStationGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseStationWtpId,
+      capwapBaseStationWtpRadioId,
+      capwapBaseStationAddedTime,
+      capwapBaseStationVlanName
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to represent
+         the stations' basic properties."
+    ::= { capwapBaseGroups 11 }
+
+capwapBaseWtpEventsStatsGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseWtpEventsStatsRebootCount,
+      capwapBaseWtpEventsStatsInitCount,
+      capwapBaseWtpEventsStatsLinkFailureCount,
+      capwapBaseWtpEventsStatsSwFailureCount,
+      capwapBaseWtpEventsStatsHwFailureCount,
+      capwapBaseWtpEventsStatsOtherFailureCount,
+      capwapBaseWtpEventsStatsUnknownFailureCount,
+      capwapBaseWtpEventsStatsLastFailureType
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used for collecting
+         WTP reboot count, link failure count, hardware failure
+         count, and so on."
+    ::= { capwapBaseGroups 12 }
+
+capwapBaseRadioEventsStatsGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseRadioEventsStatsResetCount,
+      capwapBaseRadioEventsStatsSwFailureCount,
+      capwapBaseRadioEventsStatsHwFailureCount,
+      capwapBaseRadioEventsStatsOtherFailureCount,
+      capwapBaseRadioEventsStatsUnknownFailureCount,
+      capwapBaseRadioEventsStatsConfigUpdateCount,
+      capwapBaseRadioEventsStatsChannelChangeCount,
+      capwapBaseRadioEventsStatsBandChangeCount,
+      capwapBaseRadioEventsStatsCurrNoiseFloor,
+      capwapBaseRadioEventsStatsDecryptErrorCount,
+      capwapBaseRadioEventsStatsLastFailureType
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used for collecting
+         radio reset count, channel change count, hardware failure
+         count, and so on"
+    ::= { capwapBaseGroups 13 }
+
+capwapBaseParametersGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseAcMaxRetransmit,
+      capwapBaseAcChangeStatePendingTimer,
+      capwapBaseAcDataCheckTimer,
+      capwapBaseAcDTLSSessionDeleteTimer,
+      capwapBaseAcEchoInterval,
+      capwapBaseAcRetransmitInterval,
+      capwapBaseAcSilentInterval,
+      capwapBaseAcWaitDTLSTimer,
+      capwapBaseAcWaitJoinTimer,
+      capwapBaseAcEcnSupport
+    }
+    STATUS  current
+    DESCRIPTION
+        "Objects used for the CAPWAP protocol's parameters."
+    ::= { capwapBaseGroups 14 }
+
+capwapBaseStatsGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseFailedDTLSAuthFailureCount,
+      capwapBaseFailedDTLSSessionCount
+    }
+    STATUS  current
+    DESCRIPTION
+        "Objects used for collecting the CAPWAP protocol's statistics."
+    ::= { capwapBaseGroups 15 }
+
+capwapBaseNotificationsGroup    NOTIFICATION-GROUP
+    NOTIFICATIONS {
+      capwapBaseChannelUp,
+      capwapBaseChannelDown,
+      capwapBaseDecryptErrorReport,
+      capwapBaseJoinFailure,
+      capwapBaseImageUpgradeFailure,
+      capwapBaseConfigMsgError,
+      capwapBaseRadioOperableStatus,
+      capwapBaseAuthenFailure
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of notifications in this MIB module."
+    ::= { capwapBaseGroups 16 }
+
+capwapBaseNotifyVarsGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapBaseNtfWtpId,
+      capwapBaseNtfRadioId,
+      capwapBaseNtfChannelType,
+      capwapBaseNtfAuthenMethod,
+      capwapBaseNtfChannelDownReason,
+      capwapBaseNtfStationIdList,
+      capwapBaseNtfAuthenFailureReason,
+      capwapBaseNtfRadioOperStatusFlag,
+      capwapBaseNtfRadioStatusCause,
+      capwapBaseNtfJoinFailureReason,
+      capwapBaseNtfImageFailureReason,
+      capwapBaseNtfConfigMsgErrorType,
+      capwapBaseNtfMsgErrorElements
+    }
+    STATUS  current
+    DESCRIPTION
+        "Objects used for notifications."
+    ::= { capwapBaseGroups 17 }
+
+capwapBaseNotifyControlGroup OBJECT-GROUP
+    OBJECTS {
+      capwapBaseChannelUpDownNotifyEnable,
+      capwapBaseDecryptErrorNotifyEnable,
+      capwapBaseJoinFailureNotifyEnable,
+      capwapBaseImageUpgradeFailureNotifyEnable,
+      capwapBaseConfigMsgErrorNotifyEnable,
+      capwapBaseRadioOperableStatusNotifyEnable,
+      capwapBaseAuthenFailureNotifyEnable
+   }
+   STATUS  current
+   DESCRIPTION
+        "Objects used to enable or disable notifications."
+   ::= { capwapBaseGroups 18 }
+
+END
diff --git a/snmp_builder/mibs/CAPWAP-DOT11-MIB.mib b/snmp_builder/mibs/CAPWAP-DOT11-MIB.mib
new file mode 100644
index 0000000..cce99fd
--- /dev/null
+++ b/snmp_builder/mibs/CAPWAP-DOT11-MIB.mib
@@ -0,0 +1,369 @@
+CAPWAP-DOT11-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   RowStatus, TEXTUAL-CONVENTION
+       FROM SNMPv2-TC
+   OBJECT-GROUP, MODULE-COMPLIANCE
+       FROM SNMPv2-CONF
+   MODULE-IDENTITY, OBJECT-TYPE, mib-2, Unsigned32
+       FROM SNMPv2-SMI
+   ifIndex, InterfaceIndex
+       FROM IF-MIB
+   CapwapBaseMacTypeTC, CapwapBaseTunnelModeTC
+       FROM CAPWAP-BASE-MIB;
+
+capwapDot11MIB MODULE-IDENTITY
+    LAST-UPDATED "201004300000Z"        -- 30 April 2010
+    ORGANIZATION "IETF Control And Provisioning of Wireless Access
+                  Points (CAPWAP) Working Group
+                  http://www.ietf.org/html.charters/capwap-charter.html"
+    CONTACT-INFO
+        "General Discussion: capwap@frascone.com
+         To Subscribe: http://lists.frascone.com/mailman/listinfo/capwap
+
+         Yang Shi (editor)
+         Hangzhou H3C Tech. Co., Ltd.
+         Beijing R&D Center of H3C, Digital Technology Plaza
+         NO. 9 Shangdi 9th Street, Haidian District
+         Beijing  100085
+         China
+         Phone: +86 010 82775276
+         Email: rishyang@gmail.com
+
+         David T. Perkins (editor)
+         228 Bayview Dr.
+         San Carlos, CA  94070
+         USA
+         Phone: +1 408 394-8702
+         Email:  dperkins@dsperkins.com
+
+         Chris Elliott (editor)
+         1516 Kent St.
+         Durham, NC  27707
+         USA
+         Phone: +1 919-308-1216
+         Email: chelliot@pobox.com
+
+         Yong Zhang (editor)
+         Fortinet, Inc.
+         1090 Kifer Road
+         Sunnyvale, CA  94086
+         USA
+         Email: yzhang@fortinet.com"
+   DESCRIPTION
+       "Copyright (c) 2010 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, is permitted pursuant to, and subject
+        to the license terms contained in, the Simplified BSD License
+        set forth in Section 4.c of the IETF Trust's Legal Provisions
+        Relating to IETF Documents
+        (http://trustee.ietf.org/license-info).
+
+        This version of this MIB module is part of RFC 5834;
+        see the RFC itself for full legal notices.
+
+        This MIB module contains managed object definitions for
+        CAPWAP Protocol binding for IEEE 802.11."
+   REVISION    "201004300000Z"
+   DESCRIPTION
+       "Initial version, published as RFC 5834"
+        ::= { mib-2 195 }
+
+-- Textual conventions
+
+CapwapDot11WlanIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a Wireless Local Area
+         Network (WLAN)."
+    SYNTAX      Unsigned32 (1..16)
+
+CapwapDot11WlanIdProfileTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "Represents the unique identifier of a WLAN profile."
+    SYNTAX      Unsigned32 (1..512)
+
+-- Top level components of this MIB module
+
+-- Tables, Scalars
+
+capwapDot11Objects OBJECT IDENTIFIER
+    ::= { capwapDot11MIB 1 }
+-- Conformance
+capwapDot11Conformance OBJECT IDENTIFIER
+    ::= { capwapDot11MIB 2 }
+
+-- capwapDot11WlanTable Table
+
+capwapDot11WlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapDot11WlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that allows the operator to display and configure
+         WLAN profiles, such as specifying the MAC type and tunnel mode
+         for a WLAN.  Also, it helps the AC to configure a WLAN through
+         the IEEE 802.11 MIB module.
+         Values of all objects in this table are persistent at
+         restart/reboot."
+    ::= { capwapDot11Objects 1 }
+
+capwapDot11WlanEntry  OBJECT-TYPE
+    SYNTAX      CapwapDot11WlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that stores the settings of a WLAN profile."
+    INDEX { capwapDot11WlanProfileId }
+    ::= { capwapDot11WlanTable 1 }
+
+CapwapDot11WlanEntry ::=
+    SEQUENCE {
+      capwapDot11WlanProfileId          CapwapDot11WlanIdProfileTC,
+      capwapDot11WlanProfileIfIndex     InterfaceIndex,
+      capwapDot11WlanMacType            CapwapBaseMacTypeTC,
+      capwapDot11WlanTunnelMode         CapwapBaseTunnelModeTC,
+      capwapDot11WlanRowStatus          RowStatus
+    }
+
+capwapDot11WlanProfileId OBJECT-TYPE
+    SYNTAX      CapwapDot11WlanIdProfileTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Represents the identifier of a WLAN profile that has a
+         corresponding capwapDot11WlanProfileIfIndex."
+    ::= { capwapDot11WlanEntry 1 }
+
+capwapDot11WlanProfileIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the index value that uniquely identifies a
+         WLAN Profile Interface.  The interface identified by a
+         particular value of this index is the same interface as
+         identified by the same value of the ifIndex.
+         The creation of a row object in the capwapDot11WlanTable
+         triggers the AC to automatically create an WLAN Profile
+         Interface identified by an ifIndex without manual
+         intervention.
+         Most MIB tables in the IEEE 802.11 MIB module
+         [IEEE.802-11.2007] use an ifIndex to identify an interface
+         to facilitate the configuration and maintenance, for example,
+         dot11AuthenticationAlgorithmsTable.
+         Using the ifIndex of a WLAN Profile Interface, the Operator
+         could configure a WLAN through the IEEE 802.11 MIB module."
+    ::= { capwapDot11WlanEntry 2 }
+
+capwapDot11WlanMacType OBJECT-TYPE
+    SYNTAX      CapwapBaseMacTypeTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents whether the WTP SHOULD support the WLAN in
+         Local or Split MAC modes."
+    REFERENCE
+        "Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+         RFC 5416."
+    ::= { capwapDot11WlanEntry 3 }
+
+capwapDot11WlanTunnelMode OBJECT-TYPE
+    SYNTAX      CapwapBaseTunnelModeTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the frame tunneling mode to be used for IEEE 802.11
+         data frames from all stations associated with the WLAN.
+         Bits are exclusive with each other for a specific WLAN profile,
+         and only one tunnel mode could be configured.
+         If the operator set more than one bit, the value of the
+         Response-PDU's error-status field is set to 'wrongValue',
+         and the value of its error-index field is set to the index of
+         the failed variable binding."
+    REFERENCE
+        "Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+         RFC 5416."
+    ::= { capwapDot11WlanEntry 4 }
+
+capwapDot11WlanRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This variable is used to create, modify, and/or delete a row
+         in this table.
+         All the objects in a row can be modified only when the value
+         of this object in the corresponding conceptual row is not
+         'active'.  Thus, to modify one or more of the objects in
+         this conceptual row:
+              a. change the row status to 'notInService',
+              b. change the values of the row
+              c. change the row status to 'active'
+         The capwapDot11WlanRowStatus may be changed to 'active'
+         if all the managed objects in the conceptual row with
+         MAX-ACCESS read-create have been assigned valid values.
+
+         When the operator deletes a WLAN profile, the AC SHOULD
+         check whether the WLAN profile is bound with a radio.
+         If yes, the value of the Response-PDU's error-status field
+         is set to 'inconsistentValue', and the value of its
+         error-index field is set to the index of the failed variable
+         binding.  If not, the row object could be deleted."
+    ::= { capwapDot11WlanEntry 5 }
+
+-- End of capwapDot11WlanTable Table
+
+-- capwapDot11WlanBindTable Table
+
+capwapDot11WlanBindTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CapwapDot11WlanBindEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that stores bindings between WLAN profiles
+         (identified by capwapDot11WlanProfileId) and WTP Virtual Radio
+         Interfaces.  The WTP Virtual Radio Interfaces on the AC
+         correspond to physical layer (PHY) radios on the WTPs.
+         It also stores the mappings between WLAN IDs and WLAN
+         Basic Service Set (BSS) Interfaces.
+         Values of all objects in this table are persistent at
+         restart/reboot."
+    REFERENCE
+        "Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+         RFC 5416."
+    ::= { capwapDot11Objects 2 }
+
+capwapDot11WlanBindEntry OBJECT-TYPE
+    SYNTAX      CapwapDot11WlanBindEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of objects that stores the binding of a WLAN profile
+         to a WTP Virtual Radio Interface.  It also stores the mapping
+         between WLAN ID and WLAN BSS Interface.
+         The INDEX object ifIndex is the ifIndex of a WTP Virtual
+         Radio Interface."
+    INDEX { ifIndex, capwapDot11WlanProfileId }
+    ::= { capwapDot11WlanBindTable 1 }
+
+CapwapDot11WlanBindEntry ::=
+    SEQUENCE {
+      capwapDot11WlanBindWlanId        CapwapDot11WlanIdTC,
+      capwapDot11WlanBindBssIfIndex    InterfaceIndex,
+      capwapDot11WlanBindRowStatus     RowStatus
+    }
+
+capwapDot11WlanBindWlanId OBJECT-TYPE
+    SYNTAX      CapwapDot11WlanIdTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the WLAN ID of a WLAN.
+         During a binding operation, the AC MUST select an unused
+         WLAN ID from between 1 and 16 [RFC5416].  For example, to bind
+         another WLAN profile to a radio that has been bound with
+         a WLAN profile, WLAN ID 2 should be assigned."
+    REFERENCE
+        "Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+         RFC 5416."
+    ::= { capwapDot11WlanBindEntry 1 }
+
+capwapDot11WlanBindBssIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Represents the index value that uniquely identifies a
+         WLAN BSS Interface.  The interface identified by a
+         particular value of this index is the same interface as
+         identified by the same value of the ifIndex.
+
+         The ifIndex here is for a WLAN BSS Interface.
+         The creation of a row object in the capwapDot11WlanBindTable
+         triggers the AC to automatically create a WLAN BSS Interface
+         identified by an ifIndex without manual intervention.
+         The PHY address of the capwapDot11WlanBindBssIfIndex is the
+         BSSID.  While manufacturers are free to assign BSSIDs by using
+         any arbitrary mechanism, it is advised that where possible the
+         BSSIDs are assigned as a contiguous block.
+         When assigned as a block, implementations can still assign
+         any of the available BSSIDs to any WLAN.  One possible method
+         is for the WTP to assign the address using the following
+         algorithm: base BSSID address + WLAN ID."
+    REFERENCE
+        "Section 2.4 of CAPWAP Protocol Binding for IEEE 802.11,
+         RFC 5416."
+    ::= { capwapDot11WlanBindEntry 2 }
+
+capwapDot11WlanBindRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This variable is used to create, modify, and/or delete a row
+         in this table.
+         All the objects in a row can be modified only when the value
+         of this object in the corresponding conceptual row is not
+         'active'.  Thus, to modify one or more of the objects in
+         this conceptual row:
+              a. change the row status to 'notInService',
+              b. change the values of the row
+              c. change the row status to 'active'"
+    ::= { capwapDot11WlanBindEntry 3 }
+
+-- End of capwapDot11WlanBindTable Table
+
+-- Module compliance
+
+capwapDot11Groups OBJECT IDENTIFIER
+    ::= { capwapDot11Conformance 1 }
+
+capwapDot11Compliances OBJECT IDENTIFIER
+    ::= { capwapDot11Conformance 2 }
+
+capwapDot11Compliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "Describes the requirements for conformance to the
+
+         CAPWAP-DOT11-MIB module."
+
+    MODULE -- this module
+      MANDATORY-GROUPS {
+        capwapDot11WlanGroup,
+        capwapDot11WlanBindGroup
+      }
+    ::= { capwapDot11Compliances 1 }
+
+capwapDot11WlanGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapDot11WlanProfileIfIndex,
+      capwapDot11WlanMacType,
+      capwapDot11WlanTunnelMode,
+      capwapDot11WlanRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to configure
+         the properties of a WLAN profile."
+    ::= { capwapDot11Groups 1 }
+
+capwapDot11WlanBindGroup    OBJECT-GROUP
+    OBJECTS {
+      capwapDot11WlanBindWlanId,
+      capwapDot11WlanBindBssIfIndex,
+      capwapDot11WlanBindRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects that is used to bind the
+         WLAN profiles with a radio."
+    ::= { capwapDot11Groups 2 }
+
+END
diff --git a/snmp_builder/mibs/CHARACTER-MIB.mib b/snmp_builder/mibs/CHARACTER-MIB.mib
new file mode 100644
index 0000000..dfa98c7
--- /dev/null
+++ b/snmp_builder/mibs/CHARACTER-MIB.mib
@@ -0,0 +1,646 @@
+CHARACTER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32, Gauge32, TimeTicks
+        FROM SNMPv2-SMI
+    AutonomousType, InstancePointer
+        FROM SNMPv2-TC
+    InterfaceIndex
+        FROM IF-MIB
+    transmission, mib-2
+        FROM RFC1213-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+char MODULE-IDENTITY
+    LAST-UPDATED "9405261700Z"
+    ORGANIZATION "IETF Character MIB Working Group"
+    CONTACT-INFO
+            "        Bob Stewart
+             Postal: Xyplex, Inc.
+                     295 Foster Street
+                     Littleton, MA 01460
+
+                Tel: 508-952-4816
+                Fax: 508-952-4887
+
+             E-mail: rlstewart@eng.xyplex.com"
+    DESCRIPTION
+            "The MIB module for character stream devices."
+    ::= { mib-2 19 }
+
+PortIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS current
+    DESCRIPTION
+            "A unique value, greater than zero, for each
+            character port in the managed system.  It is
+            recommended that values are assigned contiguously
+            starting from 1.  The value for each interface sub-
+            layer must remain constant at least from one re-
+            initialization of the entity's network management
+            system to the next re-initialization.
+
+            In a system where the character ports are attached
+            to hardware represented by an ifIndex, it is
+            conventional, but not required, to make the
+            character port index equal to the corresponding
+            ifIndex."
+    SYNTAX Integer32
+
+-- Generic Character information
+
+charNumber OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of entries in charPortTable, regardless
+        of their current state."
+    ::= { char 1 }
+
+-- the Character Port table
+
+charPortTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF CharPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port entries.  The number of entries is
+        given by the value of charNumber."
+    ::= { char 2 }
+
+charPortEntry OBJECT-TYPE
+    SYNTAX CharPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Status and parameter values for a character port."
+    INDEX { charPortIndex }
+    ::= { charPortTable 1 }
+
+CharPortEntry ::=
+    SEQUENCE {
+        charPortIndex
+            PortIndex,
+        charPortName
+            DisplayString,
+        charPortType
+            INTEGER,
+        charPortHardware
+            AutonomousType,
+        charPortReset
+            INTEGER,
+        charPortAdminStatus
+            INTEGER,
+        charPortOperStatus
+            INTEGER,
+        charPortLastChange
+            TimeTicks,
+        charPortInFlowType
+            INTEGER,
+        charPortOutFlowType
+            INTEGER,
+        charPortInFlowState
+            INTEGER,
+        charPortOutFlowState
+            INTEGER,
+        charPortInCharacters
+            Counter32,
+        charPortOutCharacters
+            Counter32,
+        charPortAdminOrigin
+            INTEGER,
+        charPortSessionMaximum
+            INTEGER,
+        charPortSessionNumber
+            Gauge32,
+        charPortSessionIndex
+            INTEGER,
+        charPortInFlowTypes
+
+            OCTET STRING,
+        charPortOutFlowTypes
+            OCTET STRING,
+        charPortLowerIfIndex
+            InterfaceIndex
+    }
+
+charPortIndex OBJECT-TYPE
+    SYNTAX PortIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A unique value for each character port, perhaps
+        corresponding to the same value of ifIndex when the
+        character port is associated with a hardware port
+        represented by an ifIndex."
+    ::= { charPortEntry 1 }
+
+charPortName OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..32))
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "An administratively assigned name for the port,
+        typically with some local significance."
+    ::= { charPortEntry 2 }
+
+charPortType OBJECT-TYPE
+    SYNTAX INTEGER { physical(1), virtual(2) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The port's type, 'physical' if the port represents
+        an external hardware connector, 'virtual' if it does
+        not."
+    ::= { charPortEntry 3 }
+
+charPortHardware OBJECT-TYPE
+    SYNTAX AutonomousType
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A reference to hardware MIB definitions specific to
+        a physical port's external connector.  For example,
+        if the connector is RS-232, then the value of this
+        object refers to a MIB sub-tree defining objects
+        specific to RS-232.  If an agent is not configured
+        to have such values, the agent returns the object
+
+        identifier:
+
+            nullHardware OBJECT IDENTIFIER ::= { 0 0 }
+        "
+    ::= { charPortEntry 4 }
+
+charPortReset OBJECT-TYPE
+    SYNTAX INTEGER { ready(1), execute(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "A control to force the port into a clean, initial
+        state, both hardware and software, disconnecting all
+        the port's existing sessions.  In response to a
+        get-request or get-next-request, the agent always
+        returns 'ready' as the value.  Setting the value to
+        'execute' causes a reset."
+    ::= { charPortEntry 5 }
+
+charPortAdminStatus OBJECT-TYPE
+    SYNTAX INTEGER { enabled(1), disabled(2), off(3),
+                     maintenance(4) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's desired state, independent of flow
+        control.  'enabled' indicates that the port is
+        allowed to pass characters and form new sessions.
+        'disabled' indicates that the port is allowed to
+        pass characters but not form new sessions.  'off'
+        indicates that the port is not allowed to pass
+        characters or have any sessions. 'maintenance'
+        indicates a maintenance mode, exclusive of normal
+        operation, such as running a test.
+
+        'enabled' corresponds to ifAdminStatus 'up'.
+        'disabled' and 'off' correspond to ifAdminStatus
+        'down'.  'maintenance' corresponds to ifAdminStatus
+        'test'."
+    ::= { charPortEntry 6 }
+
+charPortOperStatus OBJECT-TYPE
+    SYNTAX INTEGER { up(1), down(2),
+                     maintenance(3), absent(4), active(5) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The port's actual, operational state, independent
+
+        of flow control.  'up' indicates able to function
+        normally.  'down' indicates inability to function
+        for administrative or operational reasons.
+        'maintenance' indicates a maintenance mode,
+        exclusive of normal operation, such as running a
+        test.  'absent' indicates that port hardware is not
+        present.  'active' indicates up with a user present
+        (e.g. logged in).
+
+        'up' and 'active' correspond to ifOperStatus 'up'.
+        'down' and 'absent' correspond to ifOperStatus
+        'down'.  'maintenance' corresponds to ifOperStatus
+        'test'."
+    ::= { charPortEntry 7 }
+
+charPortLastChange OBJECT-TYPE
+    SYNTAX TimeTicks
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the time the port entered
+        its current operational state.  If the current state
+        was entered prior to the last reinitialization of
+        the local network management subsystem, then this
+        object contains a zero value."
+    ::= { charPortEntry 8 }
+
+-- charPortInFlowType is deprecated in favor of
+-- charPortInFlowTypes
+
+charPortInFlowType OBJECT-TYPE
+    SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),
+                     ctsRts(4), dsrDtr(5) }
+    MAX-ACCESS read-write
+    STATUS deprecated
+    DESCRIPTION
+        "The port's type of input flow control.  'none'
+        indicates no flow control at this level or below.
+        'xonXoff' indicates software flow control by
+        recognizing XON and XOFF characters.  'hardware'
+        indicates flow control delegated to the lower level,
+        for example a parallel port.
+
+        'ctsRts' and 'dsrDtr' are specific to RS-232-like
+        ports.  Although not architecturally pure, they are
+        included here for simplicity's sake."
+    ::= { charPortEntry 9 }
+
+-- charPortOutFlowType is deprecated in favor of
+-- charPortOutFlowTypes
+
+charPortOutFlowType OBJECT-TYPE
+    SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),
+                     ctsRts(4), dsrDtr(5) }
+    MAX-ACCESS read-write
+    STATUS deprecated
+    DESCRIPTION
+        "The port's type of output flow control.  'none'
+        indicates no flow control at this level or below.
+        'xonXoff' indicates software flow control by
+        recognizing XON and XOFF characters.  'hardware'
+        indicates flow control delegated to the lower level,
+        for example a parallel port.
+
+        'ctsRts' and 'dsrDtr' are specific to RS-232-like
+        ports.  Although not architecturally pure, they are
+        included here for simplicy's sake."
+    ::= { charPortEntry 10 }
+
+charPortInFlowState OBJECT-TYPE
+    SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current operational state of input flow control
+        on the port.  'none' indicates not applicable.
+        'unknown' indicates this level does not know.
+        'stop' indicates flow not allowed.  'go' indicates
+        flow allowed."
+    ::= { charPortEntry 11 }
+
+charPortOutFlowState OBJECT-TYPE
+    SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current operational state of output flow
+        control on the port.  'none' indicates not
+        applicable.  'unknown' indicates this level does not
+        know.  'stop' indicates flow not allowed.  'go'
+        indicates flow allowed."
+    ::= { charPortEntry 12 }
+
+charPortInCharacters OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of characters detected as input from
+        the port since system re-initialization and while
+        the port operational state was 'up', 'active', or
+        'maintenance', including, for example, framing, flow
+        control (i.e. XON and XOFF), each occurrence of a
+        BREAK condition, locally-processed input, and input
+        sent to all sessions."
+    ::= { charPortEntry 13 }
+
+charPortOutCharacters OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of characters detected as output to
+        the port since system re-initialization and while
+        the port operational state was 'up', 'active', or
+        'maintenance', including, for example, framing, flow
+        control (i.e. XON and XOFF), each occurrence of a
+        BREAK condition, locally-created output, and output
+        received from all sessions."
+    ::= { charPortEntry 14 }
+
+charPortAdminOrigin OBJECT-TYPE
+    SYNTAX INTEGER { dynamic(1), network(2), local(3),
+                     none(4) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The administratively allowed origin for
+        establishing session on the port.  'dynamic' allows
+        'network' or 'local' session establishment. 'none'
+        disallows session establishment."
+    ::= { charPortEntry 15 }
+
+charPortSessionMaximum OBJECT-TYPE
+    SYNTAX INTEGER (-1..2147483647)
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The maximum number of concurrent sessions allowed
+        on the port.  A value of -1 indicates no maximum.
+        Setting the maximum to less than the current number
+        of sessions has unspecified results."
+    ::= { charPortEntry 16 }
+
+charPortSessionNumber OBJECT-TYPE
+    SYNTAX Gauge32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of open sessions on the port that are in
+        the connecting, connected, or disconnecting state."
+    ::= { charPortEntry 17 }
+
+charPortSessionIndex OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of charSessIndex for the port's first or
+        only active session.  If the port has no active
+        session, the agent returns the value zero."
+    ::= { charPortEntry 18 }
+
+charPortInFlowTypes OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE (1))
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's types of input flow control at the
+        software level.  Hardware-level flow control is
+        independently controlled by the appropriate
+        hardware-level MIB.
+
+        A value of zero indicates no flow control.
+        Depending on the specific implementation, any or
+        all combinations of flow control may be chosen by
+        adding the values:
+
+        128  xonXoff, recognizing XON and XOFF characters
+        64   enqHost, ENQ/ACK to allow input to host
+        32   enqTerm, ACK to allow output to port
+        "
+    ::= { charPortEntry 19 }
+
+charPortOutFlowTypes OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE (1))
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's types of output flow control at the
+        software level.  Hardware-level flow control is
+        independently controlled by the appropriate
+
+        hardware-level MIB.
+
+        A value of zero indicates no flow control.
+        Depending on the specific implementation, any or
+        all combinations of flow control may be chosen by
+        adding the values:
+
+        128  xonXoff, recognizing XON and XOFF characters
+        64   enqHost, ENQ/ACK to allow input to host
+        32   enqTerm, ACK to allow output to port
+        "
+    ::= { charPortEntry 20 }
+
+charPortLowerIfIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The ifIndex value of the lower level hardware supporting
+        this character port, zero if none."
+    ::= { charPortEntry 21 }
+
+-- the Character Session table
+
+charSessTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF CharSessEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port session entries."
+    ::= { char 3 }
+
+charSessEntry OBJECT-TYPE
+    SYNTAX CharSessEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Status and parameter values for a character port
+        session."
+    INDEX { charSessPortIndex, charSessIndex }
+    ::= { charSessTable 1 }
+
+CharSessEntry ::=
+    SEQUENCE {
+        charSessPortIndex
+            PortIndex,
+        charSessIndex
+
+            INTEGER,
+        charSessKill
+            INTEGER,
+        charSessState
+            INTEGER,
+        charSessProtocol
+            AutonomousType,
+        charSessOperOrigin
+            INTEGER,
+        charSessInCharacters
+            Counter32,
+        charSessOutCharacters
+            Counter32,
+        charSessConnectionId
+            InstancePointer,
+        charSessStartTime
+            TimeTicks
+    }
+
+charSessPortIndex OBJECT-TYPE
+    SYNTAX PortIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of charPortIndex for the port to which
+        this session belongs."
+    ::= { charSessEntry 1 }
+
+charSessIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The session index in the context of the port, a
+        non-zero positive integer.  Session indexes within a
+        port need not be sequential.  Session indexes may be
+        reused for different ports.  For example, port 1 and
+        port 3 may both have a session 2 at the same time.
+        Session indexes may have any valid integer value,
+        with any meaning convenient to the agent
+        implementation."
+    ::= { charSessEntry 2 }
+
+charSessKill OBJECT-TYPE
+    SYNTAX INTEGER { ready(1), execute(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "A control to terminate the session.  In response to
+        a get-request or get-next-request, the agent always
+        returns 'ready' as the value.  Setting the value to
+        'execute' causes termination."
+    ::= { charSessEntry 3 }
+
+charSessState OBJECT-TYPE
+    SYNTAX INTEGER { connecting(1), connected(2),
+                     disconnecting(3) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current operational state of the session,
+        disregarding flow control.  'connected' indicates
+        that character data could flow on the network side
+        of session.  'connecting' indicates moving from
+        nonexistent toward 'connected'.  'disconnecting'
+        indicates moving from 'connected' or 'connecting' to
+        nonexistent."
+    ::= { charSessEntry 4 }
+
+charSessProtocol OBJECT-TYPE
+    SYNTAX AutonomousType
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The network protocol over which the session is
+        running.  Other OBJECT IDENTIFIER values may be
+        defined elsewhere, in association with specific
+        protocols.  However, this document assigns those of
+        known interest as of this writing."
+    ::= { charSessEntry 5 }
+
+wellKnownProtocols OBJECT IDENTIFIER ::= { char 4 }
+
+protocolOther  OBJECT IDENTIFIER ::= { wellKnownProtocols 1 }
+protocolTelnet OBJECT IDENTIFIER ::= { wellKnownProtocols 2 }
+protocolRlogin OBJECT IDENTIFIER ::= { wellKnownProtocols 3 }
+protocolLat    OBJECT IDENTIFIER ::= { wellKnownProtocols 4 }
+protocolX29    OBJECT IDENTIFIER ::= { wellKnownProtocols 5 }
+protocolVtp    OBJECT IDENTIFIER ::= { wellKnownProtocols 6 }
+
+charSessOperOrigin OBJECT-TYPE
+    SYNTAX INTEGER { unknown(1), network(2), local(3) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The session's source of establishment."
+    ::= { charSessEntry 6 }
+
+charSessInCharacters OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This session's subset of charPortInCharacters."
+    ::= { charSessEntry 7 }
+
+charSessOutCharacters OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This session's subset of charPortOutCharacters."
+    ::= { charSessEntry 8 }
+
+charSessConnectionId OBJECT-TYPE
+    SYNTAX InstancePointer
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A reference to additional local MIB information.
+        This should be the highest available related MIB,
+        corresponding to charSessProtocol, such as Telnet.
+        For example, the value for a TCP connection (in the
+        absence of a Telnet MIB) is the object identifier of
+        tcpConnState.  If an agent is not configured to have
+        such values, the agent returns the object
+        identifier:
+
+            nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }
+        "
+    ::= { charSessEntry 9 }
+
+charSessStartTime OBJECT-TYPE
+    SYNTAX TimeTicks
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime in MIB-2 when the session
+        entered connecting state."
+    ::= { charSessEntry 10 }
+
+-- conformance information
+
+charConformance OBJECT IDENTIFIER ::= { char 5 }
+
+charGroups      OBJECT IDENTIFIER ::= { charConformance 1 }
+charCompliances OBJECT IDENTIFIER ::= { charConformance 2 }
+
+-- compliance statements
+
+charCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities
+            which have Character hardware interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { charGroup }
+    ::= { charCompliances 1 }
+
+-- units of conformance
+
+charGroup    OBJECT-GROUP
+    OBJECTS { charNumber, charPortIndex, charPortName,
+              charPortType, charPortHardware, charPortReset,
+              charPortAdminStatus, charPortOperStatus,
+              charPortLastChange,
+              charPortInFlowState, charPortOutFlowState,
+              charPortAdminOrigin, charPortSessionMaximum,
+              charPortInFlowTypes, charPortOutFlowTypes,
+              charPortInCharacters, charPortOutCharacters,
+              charPortSessionNumber, charPortSessionIndex,
+              charPortLowerIfIndex,
+              charSessPortIndex, charSessIndex,
+              charSessKill, charSessState,
+              charSessProtocol, charSessOperOrigin,
+              charSessInCharacters, charSessOutCharacters,
+              charSessConnectionId, charSessStartTime }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+             applicable to all Character interfaces."
+    ::= { charGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/CIRCUIT-IF-MIB.mib b/snmp_builder/mibs/CIRCUIT-IF-MIB.mib
new file mode 100644
index 0000000..b582fdc
--- /dev/null
+++ b/snmp_builder/mibs/CIRCUIT-IF-MIB.mib
@@ -0,0 +1,369 @@
+CIRCUIT-IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    mib-2, Gauge32                          FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus,
+    TimeStamp, RowPointer, StorageType      FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP         FROM SNMPv2-CONF
+    ifIndex, InterfaceIndex                 FROM IF-MIB;
+
+    circuitIfMIB MODULE-IDENTITY
+        LAST-UPDATED "200201030000Z" -- January 3, 2002
+        ORGANIZATION "IETF Frame Relay Service MIB Working Group"
+        CONTACT-INFO
+          "IETF Frame Relay Service MIB (frnetmib) Working Group
+
+           WG Charter:    http://www.ietf.org/html.charters/
+                                 frnetmib-charter.html
+           WG-email:      frnetmib@sunroof.eng.sun.com
+           Subscribe:     frnetmib-request@sunroof.eng.sun.com
+           Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
+
+           Chair:      Andy Malis
+                       Vivace Networks
+           Email:      Andy.Malis@vivacenetworks.com
+
+           WG editor:  Robert Steinberger
+                       Paradyne Networks and
+                       Fujitsu Network Communications
+           Email:      robert.steinberger@fnc.fujitsu.com
+
+           Co-author:  Orly Nicklass
+                       RAD Data Communications Ltd.
+           EMail:      Orly_n@rad.co.il"
+        DESCRIPTION
+            "The MIB module to allow insertion of selected circuit into
+             the ifTable."
+        REVISION "200201030000Z" -- January 3, 2002
+        DESCRIPTION
+            "Initial version, published as RFC 3201"
+        ::= { mib-2 94 }
+
+    -- Textual Conventions
+
+    CiFlowDirection ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The direction of data flow thru a circuit.
+
+                transmit(1) - Only transmitted data
+                receive(2)  - Only received data
+                both(3)     - Both transmitted and received data."
+        SYNTAX  INTEGER {
+                  transmit(1),
+                  receive(2),
+                  both(3)
+                }
+
+    ciObjects      OBJECT IDENTIFIER ::= { circuitIfMIB 1 }
+    ciCapabilities OBJECT IDENTIFIER ::= { circuitIfMIB 2 }
+    ciConformance  OBJECT IDENTIFIER ::= { circuitIfMIB 3 }
+
+    -- The Circuit Interface Circuit Table
+    --
+    -- This table is used to define and display the circuits that
+    -- are added to the ifTable.  It maps circuits to their respective
+    -- ifIndex values.
+
+    ciCircuitTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CiCircuitEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Circuit Interface Circuit Table."
+        ::= { ciObjects 1 }
+
+    ciCircuitEntry OBJECT-TYPE
+        SYNTAX      CiCircuitEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Circuit Interface Circuit Table."
+        INDEX    { ciCircuitObject, ciCircuitFlow }
+        ::= { ciCircuitTable 1 }
+
+    CiCircuitEntry ::=
+        SEQUENCE {
+            --
+            -- Index Control Variables
+            --
+            ciCircuitObject      RowPointer,
+            ciCircuitFlow        CiFlowDirection,
+            ciCircuitStatus      RowStatus,
+            --
+            -- Data variables
+            --
+            ciCircuitIfIndex     InterfaceIndex,
+            ciCircuitCreateTime  TimeStamp,
+            --
+            -- Data Persistence
+            --
+            ciCircuitStorageType StorageType
+        }
+
+    ciCircuitObject OBJECT-TYPE
+        SYNTAX      RowPointer
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This value contains the RowPointer that uniquely
+
+             describes the circuit that is to be added to this table.
+             Any RowPointer that will force the size of OBJECT
+             IDENTIFIER of the row to grow beyond the legal limit
+             MUST be rejected.
+
+             The purpose of this object is to point a network manager
+             to the table in which the circuit was created as well as
+             define the circuit on which the interface is defined.
+
+             Valid tables for this object include the frCircuitTable
+             from the Frame Relay DTE MIB(FRAME-RELAY-DTE-MIB), the
+             frPVCEndptTable from the Frame Relay Service MIB
+             (FRNETSERV-MIB), and the aal5VccTable from the ATM MIB
+             (ATM MIB).  However, including circuits from other MIB
+             tables IS NOT prohibited."
+        ::= { ciCircuitEntry 1 }
+
+    ciCircuitFlow OBJECT-TYPE
+        SYNTAX      CiFlowDirection
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The direction of data flow through the circuit for which
+             the virtual interface is defined.  The following define
+             the information that the virtual interface will report.
+
+                transmit(1) - Only transmitted frames
+                receive(2)  - Only received frames
+                both(3)     - Both transmitted and received frames.
+
+             It is recommended that the ifDescr of the circuit
+             interfaces that are not both(3) SHOULD have text warning
+             the operators that the particular interface represents
+             only half the traffic on the circuit."
+        ::= { ciCircuitEntry 2 }
+
+    ciCircuitStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The status of the current row.  This object is
+             used to add, delete, and disable rows in this
+             table.  When the status changes to active(1), a row
+             will also be added to the interface map table below
+             and a row will be added to the ifTable.  These rows
+             SHOULD not be removed until the status is changed
+             from active(1).  The value of ifIndex for the row that
+
+             is added to the ifTable is determined by the agent
+             and MUST follow the rules of the ifTable.  The value
+             of ifType for that interface will be frDlciEndPt(193)
+             for a frame relay circuit, atmVciEndPt(194) for an
+             ATM circuit, or another ifType defining the circuit
+             type for any other circuit.
+
+             When this object is set to destroy(6), the associated
+             row in the interface map table will be removed and the
+             ifIndex will be removed from the ifTable.  Removing
+             the ifIndex MAY initiate a chain of events that causes
+             changes to other tables as well.
+
+             The rows added to this table MUST have a valid object
+             identifier for ciCircuitObject.  This means that the
+             referenced object must exist and it must be in a table
+             that supports circuits.
+
+             The object referenced by ciCircuitObject MUST exist
+             prior to transitioning a row to active(1).  If at any
+             point the object referenced by ciCircuitObject does not
+             exist or the row containing it is not in the active(1)
+             state, the status SHOULD either age out the row or
+             report notReady(3).  The effects transitioning from
+             active(1) to notReady(3) are the same as those caused
+             by setting the status to destroy(6).
+
+             Each row in this table relies on information from other
+             MIB modules.  The rules persistence of data SHOULD follow
+             the same rules as those of the underlying MIB module.
+             For example, if the circuit defined by ciCircuitObject
+             would normally be stored in non-volatile memory, then
+             the row SHOULD also be non-volatile."
+        ::= { ciCircuitEntry 3 }
+
+    ciCircuitIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The ifIndex that the agent assigns to this row."
+        ::= { ciCircuitEntry 4 }
+
+    ciCircuitCreateTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object returns the value of sysUpTime at the time
+             the value of ciCircuitStatus last transitioned to
+             active(1).  If ciCircuitStatus has never been active(1),
+             this object SHOULD return 0."
+        ::= { ciCircuitEntry 5 }
+
+    ciCircuitStorageType OBJECT-TYPE
+        SYNTAX      StorageType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The storage type used for this row."
+    ::= { ciCircuitEntry 6 }
+
+    -- The Circuit Interface Map Table
+    --
+    -- This table maps the ifIndex values that are assigned to
+    -- rows in the circuit table back to the objects that define
+    -- the circuits.
+
+    ciIfMapTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CiIfMapEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Circuit Interface Map Table."
+        ::= { ciObjects 2 }
+
+    ciIfMapEntry OBJECT-TYPE
+        SYNTAX      CiIfMapEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Circuit Interface Map Table."
+        INDEX    { ifIndex }
+        ::= { ciIfMapTable 1 }
+
+    CiIfMapEntry ::=
+        SEQUENCE {
+            --
+            -- Mapped Object Variables
+            --
+            ciIfMapObject      RowPointer,
+            ciIfMapFlow        CiFlowDirection
+        }
+
+    ciIfMapObject OBJECT-TYPE
+        SYNTAX      RowPointer
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This value contains the value of RowPointer that
+             corresponds to the current ifIndex."
+        ::= { ciIfMapEntry 1 }
+
+    ciIfMapFlow   OBJECT-TYPE
+        SYNTAX      CiFlowDirection
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value contains the value of ciCircuitFlow that
+             corresponds to the current ifIndex."
+        ::= { ciIfMapEntry 2 }
+
+    -- Change tracking metrics
+
+    ciIfLastChange OBJECT-TYPE
+        SYNTAX       TimeStamp
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The value of sysUpTime at the most recent change to
+             ciCircuitStatus for any row in ciCircuitTable."
+        ::= { ciObjects 3 }
+
+    ciIfNumActive      OBJECT-TYPE
+        SYNTAX         Gauge32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The number of active rows in ciCircuitTable."
+        ::= { ciObjects 4 }
+
+    -- Conformance Information
+
+    ciMIBGroups      OBJECT IDENTIFIER ::= { ciConformance 1 }
+    ciMIBCompliances OBJECT IDENTIFIER ::= { ciConformance 2 }
+
+    --
+    -- Compliance Statements
+    --
+
+    ciCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "The compliance statement for SNMP entities
+
+             which support of the Circuit Interfaces MIB module.
+             This group defines the minimum level of support
+             required for compliance."
+        MODULE -- this module
+            MANDATORY-GROUPS { ciCircuitGroup,
+                               ciIfMapGroup,
+                               ciStatsGroup }
+
+            OBJECT      ciCircuitStatus
+            SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Row creation can be done outside of the scope of
+                the SNMP protocol.  If this object is implemented with
+                max-access of read-only, then the only value that MUST
+                be returned is active(1)."
+
+            OBJECT      ciCircuitStorageType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "It is legal to support ciCircuitStorageType as read-
+                only as long as the value reported in consistent
+                with the actual storage mechanism employed within the
+                agent."
+    ::= { ciMIBCompliances 1 }
+
+    --
+    -- Units of Conformance
+    --
+    ciCircuitGroup  OBJECT-GROUP
+       OBJECTS {
+            ciCircuitStatus,
+            ciCircuitIfIndex,
+            ciCircuitCreateTime,
+            ciCircuitStorageType
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of required objects providing
+            information from the circuit table."
+       ::= { ciMIBGroups 1 }
+
+    ciIfMapGroup OBJECT-GROUP
+       OBJECTS {
+            ciIfMapObject,
+            ciIfMapFlow
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of required objects providing
+            information from the interface map table."
+       ::= { ciMIBGroups 2 }
+
+    ciStatsGroup OBJECT-GROUP
+       OBJECTS {
+            ciIfLastChange,
+            ciIfNumActive
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of statistical metrics used to help manage
+            the ciCircuitTable."
+       ::= { ciMIBGroups 3 }
+END
diff --git a/snmp_builder/mibs/CISCO-SMI b/snmp_builder/mibs/CISCO-SMI
new file mode 100644
index 0000000..1d88b43
--- /dev/null
+++ b/snmp_builder/mibs/CISCO-SMI
@@ -0,0 +1,542 @@
+-- *****************************************************************
+-- CISCO-SMI.my:  Cisco Enterprise Structure of Management Information
+--   
+-- April 1994, Jeffrey T. Johnson
+--   
+-- Copyright (c) 1994-1997, 2001, 2009 by cisco Systems Inc.
+-- All rights reserved.
+--   
+-- ****************************************************************
+
+CISCO-SMI DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-IDENTITY,
+    enterprises
+        FROM SNMPv2-SMI;
+
+
+cisco MODULE-IDENTITY
+    LAST-UPDATED    "200902030000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 West Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-snmp@cisco.com"
+    DESCRIPTION
+        "The Structure of Management Information for the
+        Cisco enterprise."
+    REVISION        "200902030000Z"
+    DESCRIPTION
+        "Added ciscoSB under otherEnterprises"
+    REVISION        "200203210000Z"
+    DESCRIPTION
+        "Added ciscoPKI for PKI policy and extension OIDs"
+    REVISION        "200105220000Z"
+    DESCRIPTION
+        "Added transport protocol domains."
+    REVISION        "200011012246Z"
+    DESCRIPTION
+        "Added ciscoDomains to define new transports.  Also added
+        ciscoCpeCIB, which will contain managed objects that
+        contribute to the CPE Configuration Information Base (CIB)."
+    REVISION        "200001110000Z"
+    DESCRIPTION
+        "Added ciscoPolicy, ciscoPolicyAuto, ciscoPIB, and
+        ciscoPibToMib."
+    REVISION        "9704090000Z"
+    DESCRIPTION
+        "Added ciscoPartnerProducts to generate sysObjectID
+        for partner platforms"
+    REVISION        "9505160000Z"
+    DESCRIPTION
+        "New oid assignments for Cisco REPEATER MIB and others."
+    REVISION        "9404262000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { enterprises 9 }
+
+
+
+-- assigned by IANA
+
+ciscoProducts OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoProducts is the root OBJECT IDENTIFIER from
+        which sysObjectID values are assigned.  Actual
+        values are defined in CISCO-PRODUCTS-MIB."
+    ::= { cisco 1 }
+
+
+local OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "Subtree beneath which pre-10.2 MIBS were built."
+    ::= { cisco 2 }
+
+
+temporary OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "Subtree beneath which pre-10.2 experiments were
+        placed."
+    ::= { cisco 3 }
+
+
+pakmon OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "reserved for pakmon"
+    ::= { cisco 4 }
+
+
+workgroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "subtree reserved for use by the Workgroup Business Unit"
+    ::= { cisco 5 }
+
+
+otherEnterprises OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "otherEnterprises provides a root object identifier
+        from which mibs produced by other companies may be
+        placed.  mibs produced by other enterprises are
+        typicially implemented with the object identifiers
+        as defined in the mib, but if the mib is deemed to
+        be uncontrolled, we may reroot the mib at this
+        subtree in order to have a controlled version."
+    ::= { cisco 6 }
+
+
+ciscoSB OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoSB provides root Object Identifier for Management
+        Information Base for products of Cisco Small Business.
+        This includes products rebranded from linksys aquisition.
+        MIB numbers under this root are managed and controlled
+        by ciscosb_mib@cisco.com."
+    ::= { otherEnterprises 1 }
+
+
+ciscoAgentCapability OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoAgentCapability provides a root object identifier
+        from which AGENT-CAPABILITIES values may be assigned."
+    ::= { cisco 7 }
+
+
+ciscoConfig OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoConfig is the main subtree for configuration mibs."
+    ::= { cisco 8 }
+
+
+ciscoMgmt OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoMgmt is the main subtree for new mib development."
+    ::= { cisco 9 }
+
+
+ciscoExperiment OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoExperiment provides a root object identifier
+        from which experimental mibs may be temporarily
+        based.  mibs are typicially based here if they
+        fall in one of two categories
+        1) are IETF work-in-process mibs which have not
+        been assigned a permanent object identifier by
+        the IANA.
+        2) are cisco work-in-process which has not been
+        assigned a permanent object identifier by the
+        cisco assigned number authority, typicially because
+        the mib is not ready for deployment.
+
+        NOTE WELL:  support for mibs in the ciscoExperiment
+        subtree will be deleted when a permanent object
+        identifier assignment is made."
+    ::= { cisco 10 }
+
+
+ciscoAdmin OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoAdmin is reserved for administratively assigned
+        OBJECT IDENTIFIERS, i.e. those not associated with MIB
+        objects"
+    ::= { cisco 11 }
+
+
+ciscoModules OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoModules provides a root object identifier
+        from which MODULE-IDENTITY values may be assigned."
+    ::= { cisco 12 }
+
+
+lightstream OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "subtree reserved for use by Lightstream"
+    ::= { cisco 13 }
+
+
+ciscoworks OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoworks provides a root object identifier beneath
+        which mibs applicable to the CiscoWorks family of network
+        management products are defined."
+    ::= { cisco 14 }
+
+
+newport OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "subtree reserved for use by the former Newport Systems
+        Solutions, now a portion of the Access Business Unit."
+    ::= { cisco 15 }
+
+
+ciscoPartnerProducts OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoPartnerProducts is the root OBJECT IDENTIFIER from
+        which partner sysObjectID values may be assigned. Such 
+        sysObjectID values are composed of the ciscoPartnerProducts
+        prefix, followed by a single identifier that is unique for 
+        each partner, followed by the value of sysObjectID of the
+        Cisco product from which partner product is derived.  Note
+        that the chassisPartner MIB object defines the value of the
+        identifier assigned to each partner."
+    ::= { cisco 16 }
+
+
+ciscoPolicy OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoPolicy is the root of the Cisco-assigned OID
+        subtree for use with Policy Management."
+    ::= { cisco 17 }
+
+
+-- Note that 1.3.6.1.4.1.9.17.1 is currently unassigned
+
+ciscoPIB OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoPIB is the root of the Cisco-assigned OID
+        subtree for assignment to PIB (Policy Information
+        Base) modules."
+    ::= { ciscoPolicy 2 }
+
+
+ciscoPolicyAuto OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoPolicyAuto is the root of the Cisco-assigned
+        OID subtree for OIDs which are automatically assigned
+        for use in Policy Management."
+    ::= { cisco 18 }
+
+
+-- Note that 1.3.6.1.4.1.9.18.1 is currently unassigned
+
+ciscoPibToMib OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoPibToMib is the root of the Cisco-assigned
+        OID subtree for MIBs which are algorithmically
+        generated/translated from Cisco PIBs with OIDs
+        assigned under the ciscoPIB subtree.
+        These generated MIBs allow management
+        entities (other the current Policy Server) to
+        read the downloaded policy.  By convention, for PIB
+        'ciscoPIB.x', the generated MIB shall have the
+        name 'ciscoPibToMib.x'."
+    ::= { ciscoPolicyAuto 2 }
+
+
+ciscoDomains OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoDomains provides a root object identifier from which
+        different transport mapping values may be assigned."
+    ::= { cisco 19 }
+
+
+ciscoCIB OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoCIB is the root of the Cisco-assigned OID subtree for
+        assignment to MIB modules describing managed objects that
+        part of the CPE automatic configuration framework."
+    ::= { cisco 20 }
+
+
+ciscoCibMmiGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoCibMmiGroup is the root of the Cisco-assigned OID
+        subtree for assignment to MIB modules describing managed
+        objects supporting the Modem Management Interface (MMI),
+        the interface that facilitates CPE automatic configuration."
+    ::= { ciscoCIB 1 }
+
+
+ciscoCibProvGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoCibStoreGroup is the root of the Cisco-assigned OID
+        subtree for assignment to MIB modules describing managed
+        objects contributing to the Configuration Information Base
+        (CIB)."
+    ::= { ciscoCIB 2 }
+
+
+ciscoPKI OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoPKI is the root of cisco-assigned OID subtree for PKI
+        Certificate Policies and Certificate Extensions."
+    ::= { cisco 21 }
+
+
+-- ciscoAdmin assignments follow
+
+ciscoProxy OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoProxy OBJECT IDENTIFIERS are used to uniquely name
+        party mib records created to proxy for SNMPv1."
+    ::= { ciscoAdmin 1 }
+
+ciscoPartyProxy  OBJECT IDENTIFIER
+    ::= { ciscoProxy 1 }
+
+ciscoContextProxy  OBJECT IDENTIFIER
+    ::= { ciscoProxy 2 }
+
+
+-- Administrative assignments for repeaters
+
+ciscoRptrGroupObjectID OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "ciscoRptrGroupObjectID OBJECT IDENTIFIERS are used to
+        uniquely identify groups of repeater ports for use by the
+        SNMP-REPEATER-MIB (RFC 1516) rptrGroupObjectID object."
+    ::= { ciscoAdmin 2 }
+
+
+ciscoUnknownRptrGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The identity of an unknown repeater port group."
+    ::= { ciscoRptrGroupObjectID 1 }
+
+
+cisco2505RptrGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The authoritative identity of the Cisco 2505 repeater
+        port group."
+    ::= { ciscoRptrGroupObjectID 2 }
+
+
+cisco2507RptrGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The authoritative identity of the Cisco 2507 repeater
+        port group."
+    ::= { ciscoRptrGroupObjectID 3 }
+
+
+cisco2516RptrGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The authoritative identity of the Cisco 2516 repeater
+        port group."
+    ::= { ciscoRptrGroupObjectID 4 }
+
+
+ciscoWsx5020RptrGroup OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The authoritative identity of the wsx5020 repeater
+        port group."
+    ::= { ciscoRptrGroupObjectID 5 }
+
+
+-- Administrative assignments for chip sets
+
+ciscoChipSets OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "Numerous media-specific MIBS have an object, defined as
+        an OBJECT IDENTIFIER, which is the identity of the chipset
+        realizing the interface.  Cisco-specific chipsets have their 
+        OBJECT IDENTIFIERS assigned under this subtree."
+    ::= { ciscoAdmin 3 }
+
+
+ciscoChipSetSaint1 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The identity of the Rev 1 SAINT ethernet chipset
+        manufactured for cisco by LSI Logic."
+    ::= { ciscoChipSets 1 }
+
+
+ciscoChipSetSaint2 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The identity of the Rev 2 SAINT ethernet chipset
+        manufactured for cisco by LSI Logic."
+    ::= { ciscoChipSets 2 }
+
+
+ciscoChipSetSaint3 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The identity of the Rev 3 SAINT ethernet chipset
+        manufactured for cisco by Plessey."
+    ::= { ciscoChipSets 3 }
+
+
+ciscoChipSetSaint4 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The identity of the Rev 4 SAINT ethernet chipset
+        manufactured for cisco by Mitsubishi."
+    ::= { ciscoChipSets 4 }
+
+-- Transport protocol domains
+--   
+-- The textual conventions for these domains are defined in CISCO-TM.
+
+ciscoTDomains  OBJECT IDENTIFIER
+    ::= { ciscoDomains 99999 }
+
+
+ciscoTDomainUdpIpv4 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The UDP over IPv4 transport domain.  The corresponding
+        transport address is of type CiscoTAddressIPv4."
+    ::= { ciscoTDomains 1 }
+
+
+ciscoTDomainUdpIpv6 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The UDP over IPv6 transport domain.  The corresponding
+        transport address is of type CiscoTAddressIPv6 for global IPv6
+        addresses and CiscoTAddressIPv6s for scoped IPv6 addresses."
+    ::= { ciscoTDomains 2 }
+
+
+ciscoTDomainTcpIpv4 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The TCP over IPv4 transport domain.  The corresponding
+        transport address is of type CiscoTAddressIPv4."
+    ::= { ciscoTDomains 3 }
+
+
+ciscoTDomainTcpIpv6 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The TCP over IPv6 transport domain.  The corresponding
+        transport address is of type CiscoTAddressIPv6 for global IPv6
+        addresses and CiscoTAddressIPv6s for scoped IPv6 addresses."
+    ::= { ciscoTDomains 4 }
+
+
+ciscoTDomainLocal OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The Posix Local IPC transport domain. The corresponding
+        transport address is of type CiscoTAddressLocal.  The Posix
+        Local IPC transport domain incorporates the well known UNIX
+        domain sockets."
+    ::= { ciscoTDomains 5 }
+
+
+ciscoTDomainClns OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The CLNS transport domain.  The corresponding transport
+        address is of type CiscoTAddressOSI."
+    ::= { ciscoTDomains 6 }
+
+
+ciscoTDomainCons OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The CONS transport domain.  The corresponding transport
+        address is of type CiscoTAddressOSI."
+    ::= { ciscoTDomains 7 }
+
+
+ciscoTDomainDdp OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The DDP transport domain.  The corresponding transport
+        address is of type CiscoTAddressNBP."
+    ::= { ciscoTDomains 8 }
+
+
+ciscoTDomainIpx OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The IPX transport domain.  The corresponding transport
+        address is of type CiscoTAddressIPX."
+    ::= { ciscoTDomains 9 }
+
+
+ciscoTDomainSctpIpv4 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The SCTP over IPv4 transport domain.  The corresponding
+        transport address is of type CiscoTAddressIPv4."
+    REFERENCE
+        "RFC 2960 - Stream Control Transmission Protocol. R. Stewart,
+        Q. Xie, K. Morneault, C. Sharp, H. Schwarzbauer, T. Taylor,
+        I. Rytina, M. Kalla, L. Zhang, V. Paxson. October 2000."
+    ::= { ciscoTDomains 10 }
+
+
+ciscoTDomainSctpIpv6 OBJECT-IDENTITY
+    STATUS          current
+    DESCRIPTION
+        "The SCTP over IPv6 transport domain.  The corresponding
+        transport address is of type CiscoTAddressIPv6 for global IPv6
+        addresses and CiscoTAddressIPv6s for scoped IPv6 addresses."
+    REFERENCE
+        "RFC 2960 - Stream Control Transmission Protocol. R. Stewart,
+        Q. Xie, K. Morneault, C. Sharp, H. Schwarzbauer, T. Taylor,
+        I. Rytina, M. Kalla, L. Zhang, V. Paxson. October 2000."
+    ::= { ciscoTDomains 11 }
+
+
+END
+
+
+
diff --git a/snmp_builder/mibs/CISCO-SYSTEM-EXT-MIB.mib b/snmp_builder/mibs/CISCO-SYSTEM-EXT-MIB.mib
new file mode 100644
index 0000000..de7b1c6
--- /dev/null
+++ b/snmp_builder/mibs/CISCO-SYSTEM-EXT-MIB.mib
@@ -0,0 +1,1113 @@
+-- *********************************************************************
+-- CISCO-SYSTEM-EXT-MIB.my: System Extension MIB
+--   
+-- October 2002, Vinay Gaonkar
+-- Copyright (c) 2002, 2003, 2005-2007 by cisco Systems Inc.
+-- All rights reserved.
+--   
+-- ********************************************************************
+
+CISCO-SYSTEM-EXT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    Unsigned32,
+    Gauge32
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    TEXTUAL-CONVENTION,
+    TruthValue,
+    DateAndTime
+        FROM SNMPv2-TC
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    InetAddressType,
+    InetAddress
+        FROM INET-ADDRESS-MIB
+    sysName
+        FROM SNMPv2-MIB
+    EntPhysicalIndexOrZero,
+    TimeIntervalSec
+        FROM CISCO-TC
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoSystemExtMIB MODULE-IDENTITY
+    LAST-UPDATED    "200708060000Z"
+    ORGANIZATION    "Cisco Systems Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+            Tel: +1 800 553 -NETS
+            E-mail: cs-san@cisco.com"
+    DESCRIPTION
+        "MIB module for monitoring High Availability, SNMP SET
+        errors and bandwidths.  This mib module also provides the
+        information on core files that are generated in the
+        system.
+        GLOSSARY
+        FIPS Federal Information Processing Standards Publication."
+    REVISION        "200708060000Z"
+    DESCRIPTION
+        "-Added a scalar object 'cseSysUpTime'
+        -Added an Object Group ciscoSystemExtInfoGroupRev3 and
+         a MODULE-COMPLIANCE ciscoSystemExtMIBComplianceRev8
+         to include the new object."
+    REVISION        "200611290000Z"
+    DESCRIPTION
+        "Added ciscoSystemExtInfoFIPSGroup.
+        Added a new object cseSysFIPSModeActivation."
+    REVISION        "200609250000Z"
+    DESCRIPTION
+        "-Added cseSwCoresFileName in cseSwCoresTable.
+        -Added new notification cseFailSwCoreNotifyExtended.
+        -Added new group ciscoSystemExtSwFailureGroup3.
+        -Added new group ciscoSystemExtNotificationGroupSup2.
+        -Added compliance ciscoSystemExtMIBComplianceRev6 to
+         replace ciscoSystemExtMIBComplianceRev5.
+        -Added new group ciscoSystemExtSwFailureControlGroup.
+        -Added new ciscoSwFailureNotifEnable object."
+    REVISION        "200511090000Z"
+    DESCRIPTION
+        "Added a new group ciscoSystemExtInfoTelnetGroup.
+        Added a new object cseSysTelnetServiceActivation."
+    REVISION        "200506140000Z"
+    DESCRIPTION
+        "Updated CseHaRestartReason
+        Added a new table cseSwCoresTable. 
+        Added notifications - cseFailSwCoreNotify
+                            - cseShutDownNotify
+        Added a new group ciscoSystemExtSwFailureGroup2.
+        Added a new group ciscoSystemExtNotificationGroup1.
+
+        Added a new object cseSysConsolePortStatus. 
+        Added a new group ciscoSystemExtInfoGroupRev2.
+        Added a new compliance group 
+                ciscoSystemExtMIBComplianceRev4."
+    REVISION        "200404190000Z"
+    DESCRIPTION
+        "Added a new object cseSwCorePath."
+    REVISION        "200305020000Z"
+    DESCRIPTION
+        "Added a new object cseWriteErase.
+        Added a new group ciscoSystemExtInfoGroupOptional.
+        A new compliance ciscoSystemExtMIBComplianceRev2 
+        added to replace ciscoSystemExtMIBComplianceRev1."
+    REVISION        "200303020000Z"
+    DESCRIPTION
+        "Added cseSysAutoSync and cseSysAutoSyncState."
+    REVISION        "200211190000Z"
+    DESCRIPTION
+        "Added cseSysConfLastChange."
+    REVISION        "200210040000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { ciscoMgmt 305 }
+
+
+ciscoSystemExtMIBNotifsPrefix  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIB 0 }
+
+ciscoSystemExtMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIB 1 }
+
+ciscoSystemExtMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIB 2 }
+
+ciscoSysInfoGroup  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBObjects 1 }
+
+ciscoSysErrorGroup  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBObjects 2 }
+
+ciscoHaGroup  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBObjects 3 }
+
+ciscoSwFailureGroup  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBObjects 4 }
+
+ciscoSwFailureNotifControl  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBObjects 5 }
+
+
+-- Textual Conventions
+
+CseHaRestartReason ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Reason codes for the restart of a service.
+        unknown (1)           - ungraceful exit
+        ungracefulExit (2)    - ungraceful exit
+        otherSignal (3)       - service got some other signal
+        sigterm (4)           - received SIGTERM
+        softwareUpgrade (5)   - software upgrade
+        configUpdate (6)      - config update
+        configRemove (7)      - config removal
+        shutdown (8)          - manually shutdown
+        aborted (9)           - aborted
+        heartbeatFailure (10) - heartbeat failure
+        userTerminate (11)    - user termination
+        gracefulExit (12)     - graceful exit
+        failureNoCallhome (13)- service exited but it 
+                                does not want a callhome
+                                message to be generated 
+        serviceTimeout (14)   - service timeout"
+    SYNTAX          INTEGER  {
+                        unknown(1),
+                        ungracefulExit(2),
+                        otherSignal(3),
+                        sigterm(4),
+                        softwareUpgrade(5),
+                        configUpdate(6),
+                        configRemove(7),
+                        shutdown(8),
+                        aborted(9),
+                        heartbeatFailure(10),
+                        userTerminate(11),
+                        gracefulExit(12),
+                        noCallHomeFailure(13),
+                        serviceTimeout(14)
+                    }
+
+-- System Information Group
+
+cseSysCPUUtilization OBJECT-TYPE
+    SYNTAX          Gauge32 (0..100 )
+    UNITS           "%"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The average utilization of CPU on the active
+        supervisor." 
+    ::= { ciscoSysInfoGroup 1 }
+
+-- Memory utilization
+
+cseSysMemoryUtilization OBJECT-TYPE
+    SYNTAX          Gauge32 (0..100 )
+    UNITS           "%"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The average utilization of memory on the active
+        supervisor." 
+    ::= { ciscoSysInfoGroup 2 }
+
+cseSysConfLastChange OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The local date and time when the
+        configuration was last changed. This object will 
+        be set to zero on power cycle or on reboot of 
+        the system. Also, if the clock is changed on 
+        local system it is set to zero." 
+    ::= { ciscoSysInfoGroup 3 }
+
+cseSysAutoSync OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        sync(1),
+                        noSync(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The state of the auto synchronization of images
+        between the active and standby supervisor.
+        Setting the value to sync when the existing value
+        is sync, has no effect on the operation."
+    DEFVAL          { noSync } 
+    ::= { ciscoSysInfoGroup 4 }
+
+cseSysAutoSyncState OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        inProgress(1),
+                        succeeded(2),
+                        failed(3),
+                        notStarted(4)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The status of the current auto synchronization
+        process, or if no such process is in progress,  
+        then the state of the most recent one.  The 
+        value 'notStarted' indicates no auto synchronization 
+        process has occurred recently." 
+    ::= { ciscoSysInfoGroup 5 }
+
+cseWriteErase OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        noOp(1),
+                        eraseAll(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object is used to initiate a write erase on the
+        device's saved configuration file(s) from which the 
+        device loads its configuration when it restarts.
+
+        If the value of this object is set to 'eraseAll', then
+        all the saved configurations are removed.
+
+        No action is taken when the this object is set to 
+        'noOp'.
+        When read, the value of this object is always 'noOp'." 
+    ::= { ciscoSysInfoGroup 6 }
+
+cseSysConsolePortStatus OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        connected(1),
+                        notConnected(2)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object describes the status of the console
+        port on this device.  
+
+        The status 'connected' means that there is
+        a cable attached to the console port.
+
+        The status 'notConnected' means that there is
+        no connection out of the console port." 
+    ::= { ciscoSysInfoGroup 7 }
+
+cseSysTelnetServiceActivation OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Enables or disables the Telnet service on the
+        device. In other words, it enables or disables
+        the telneting to the device."
+    DEFVAL          { true } 
+    ::= { ciscoSysInfoGroup 8 }
+
+cseSysFIPSModeActivation OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The object to enable/disable FIPS mode  on the device.
+        FIPS 140-2 is a set of security requirements for cryptographic
+        modules and it details the U.S. Government requirements for
+        cryptographic modules.
+        A module will comprise both hardware and software, eg a
+        datacenter  switching or routing module. The module is said to
+        be in FIPS enabled mode when a request is recieved to enable the
+        FIPS mode and a set of self-tests are successfully run in
+        response to the request. If the self-tests fail, then an
+        appropriate error is returned."
+    REFERENCE
+        "FIPS PUB 140-2 Security Requirements for Cryptographic  
+               Modules"
+    DEFVAL          { false } 
+    ::= { ciscoSysInfoGroup 9 }
+
+cseSysUpTime OBJECT-TYPE
+    SYNTAX          TimeIntervalSec
+    UNITS           "Seconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The time (in seconds) since the entire system
+        was last re-initialized as a result of reload. The 
+        initialization being system loaded and running with a system
+        image software on the first active supervisor (SUP). In High 
+        Availibility (HA) capable system / System that provides 
+        Supervisor module redundancy, this uptime indicates time 
+        elapsed since the first active SUP was booted. This will not 
+        change even if the active SUP goes down and stand-by takes
+        over as active." 
+    ::= { ciscoSysInfoGroup 10 }
+
+cseSnmpErrorTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CseSnmpErrorEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table containing information about the errors which have
+        recently caused the generation of a SNMP Response PDU with a 
+        non-zero value in its error-status field for SNMP Set Response
+        PDU. 
+
+        This table serves as an extension to the SNMP's error status 
+        when a SNMP Set request fails. SNMP returns only a pre-defined
+        set of standard error codes which does not convey the specific 
+        cause for an error. Typically, there is an incumbent and 
+        sizable burden on the configuration application to determine 
+        if the configuration request failure is the result of a 
+        resource issue, a security issue, or an application error 
+        (like an object depending on some other objects). So from a 
+        user perspective, it is important that a specific error be 
+        made known.
+
+        Ideally, when a 'badValue' error occurs for a given set 
+        request, an application can query the command responder for 
+        more details on the error. 
+
+        This table provides a framework for the command responders to 
+        provide more information on the SET errors.
+
+        It is up to the implementation to create entries in this table 
+        for either only certain SNMP errors or all of the SNMP errors.
+
+        Note that only most recent incarnation of an entry is kept in 
+        this table."
+    ::= { ciscoSysErrorGroup 1 }
+
+cseSnmpErrorEntry OBJECT-TYPE
+    SYNTAX          CseSnmpErrorEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry (conceptual row) in the  cseSnmpErrorTable, containing
+        information about an error which has recently caused a SNMP 
+        SetRequest to fail.  An entry is created by the agent 
+        on the occurrence of an error, and is deleted approximately 5
+        minutes later. The reasons for this are :
+        - to prevent old entries clogging the table.
+        - optimal utilization of the resources like memory."
+    INDEX           {
+                        cseSnmpErrorAddressType,
+                        cseSnmpErrorAddress,
+                        cseSnmpErrorRequestId
+                    } 
+    ::= { cseSnmpErrorTable 1 }
+
+CseSnmpErrorEntry ::= SEQUENCE {
+        cseSnmpErrorAddressType InetAddressType,
+        cseSnmpErrorAddress     InetAddress,
+        cseSnmpErrorRequestId   Unsigned32,
+        cseSnmpErrorCode        Unsigned32,
+        cseSnmpErrorDescription SnmpAdminString
+}
+
+cseSnmpErrorAddressType OBJECT-TYPE
+    SYNTAX          InetAddressType
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The type of address from which the error-ed SetRequest
+        originated." 
+    ::= { cseSnmpErrorEntry 1 }
+
+cseSnmpErrorAddress OBJECT-TYPE
+    SYNTAX          InetAddress
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The address from which the error-ed SetRequest originated." 
+    ::= { cseSnmpErrorEntry 2 }
+
+cseSnmpErrorRequestId OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The request-id of the error-ed SetRequest." 
+    ::= { cseSnmpErrorEntry 3 }
+
+cseSnmpErrorCode OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The code for the Mib object specific error which
+        caused a SetRequest to fail.
+        This error code is platform-specific and for debugging
+        purposes only. For information on this code, the 
+        corresponding instance of cseSnmpErrorDescription must be 
+        used. 
+        This code is not the same as the value contained
+        in the error-status field of SNMP Response PDU." 
+    ::= { cseSnmpErrorEntry 4 }
+
+cseSnmpErrorDescription OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The error description for the error happened for the
+        SetRequest." 
+    ::= { cseSnmpErrorEntry 5 }
+ 
+
+
+-- Notification informations
+
+cseHaRestartReason OBJECT-TYPE
+    SYNTAX          CseHaRestartReason
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "The reason for most recent restart of a service on the
+        'active' supervisor." 
+    ::= { ciscoHaGroup 2 }
+
+cseHaRestartStateless OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "Tells if the most recent restart of a service on the
+        'active' supervisor was 'stateless' or not.
+         A 'stateless' restart of a service is where no runtime 
+         information is preserved while restarting the service." 
+    ::= { ciscoHaGroup 3 }
+
+cseHaRestartService OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..255))
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "Name of the service (or process) that was restarted on
+        the 'active' supervisor." 
+    ::= { ciscoHaGroup 4 }
+
+cseHaShutDownReason OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..255))
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "The description of the reason as to why the system
+        is going to go down." 
+    ::= { ciscoHaGroup 6 }
+
+-- software failure group
+
+cseSwCorePath OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..255))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Provides the path where the software cores are
+        stored on the system. The management application can
+        use this path to copy the cores from the system using
+        CISCO-FLASH-MIB." 
+    ::= { ciscoSwFailureGroup 1 }
+
+cseSwCoresTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CseSwCoresEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table containing information about the system cores that
+        have been generated as an effect of some system failures."
+    ::= { ciscoSwFailureGroup 2 }
+
+cseSwCoresEntry OBJECT-TYPE
+    SYNTAX          CseSwCoresEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry (conceptual row) in the  cseSwCoresTable, containing
+        information about cores that have been generated."
+    INDEX           {
+                        cseSwCoresModule,
+                        cseSwCoresProcName,
+                        cseSwCoresInstance
+                    } 
+    ::= { cseSwCoresTable 1 }
+
+CseSwCoresEntry ::= SEQUENCE {
+        cseSwCoresModule      EntPhysicalIndexOrZero,
+        cseSwCoresProcName    SnmpAdminString,
+        cseSwCoresInstance    Unsigned32,
+        cseSwCoresPID         Unsigned32,
+        cseSwCoresTimeCreated DateAndTime,
+        cseSwCoresSlotNum     Unsigned32,
+        cseSwCoresFileName    SnmpAdminString
+}
+
+cseSwCoresModule OBJECT-TYPE
+    SYNTAX          EntPhysicalIndexOrZero
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The physical module on which the process crashed." 
+    ::= { cseSwCoresEntry 1 }
+
+cseSwCoresProcName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (1..64))
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the process that crashed and generated core." 
+    ::= { cseSwCoresEntry 2 }
+
+cseSwCoresInstance OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The instance of the core for a process identified by
+        cseSwCoresProcName and on the module identified by
+        cseSwCoresModule. 
+
+        To uniquely identify a core, the module number and 
+        process name are not sufficient as there could be 
+        multiple cores for the same module number and process
+        name." 
+    ::= { cseSwCoresEntry 3 }
+
+cseSwCoresPID OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The process identifier of the process that dumped the
+        core." 
+    ::= { cseSwCoresEntry 4 }
+
+cseSwCoresTimeCreated OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The time at which the core was created." 
+    ::= { cseSwCoresEntry 5 }
+
+cseSwCoresSlotNum OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The slot number corresponding to the cseSwCoresModule
+        in this chassis." 
+    ::= { cseSwCoresEntry 6 }
+
+cseSwCoresFileName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object contains the core file-name(including the
+        path, relative to the value in the cseSwCorePath object). 
+        If the cseSwCorePath contains zero length octet string,
+        then this object will contain the filename with absolute
+        path.  If this object contains zero length octet string,
+        then the core file is available in path identified in
+        cseSwCorePath." 
+    ::= { cseSwCoresEntry 7 }
+ 
+
+
+-- Notification Control Group
+
+ciscoSwFailureNotifEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object is used for administratively
+        enabling/disabling the cseFailSwCoreNotify or
+        cseFailSwCoreNotifyExtended notifications."
+    DEFVAL          { false } 
+    ::= { ciscoSwFailureNotifControl 1 }
+-- Notifications
+--   
+
+-- High Availability Notifications
+
+cseHaNotification  OBJECT IDENTIFIER
+    ::= { ciscoHaGroup 5 }
+
+cseHaNotificationPrefix  OBJECT IDENTIFIER
+    ::= { cseHaNotification 0 }
+
+
+cseHaRestartNotify NOTIFICATION-TYPE
+    OBJECTS         {
+                        cseHaRestartReason,
+                        cseHaRestartService,
+                        cseHaRestartStateless
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A service restart notification is generated
+        whenever a service (or a process) on the 'active' 
+        supervisor is restarted."
+   ::= { cseHaNotificationPrefix 1 }
+
+cseShutDownNotify NOTIFICATION-TYPE
+    OBJECTS         { cseHaShutDownReason }
+    STATUS          current
+    DESCRIPTION
+        "A system shutdown notification is generated
+        whenever a system is going to shut down. The
+        cseHaShutDownReason, describes the reason as to
+        why the system is going to go down."
+   ::= { cseHaNotificationPrefix 2 }
+-- Failure Group Notifications
+
+cseFailNotification  OBJECT IDENTIFIER
+    ::= { ciscoSwFailureGroup 3 }
+
+cseFailNotificationPrefix  OBJECT IDENTIFIER
+    ::= { cseFailNotification 0 }
+
+
+cseFailSwCoreNotify NOTIFICATION-TYPE
+    STATUS          current
+    DESCRIPTION
+        "A notification is generated whenever a software
+        crash occurs and a core file is generated."
+   ::= { cseFailNotificationPrefix 1 }
+
+cseFailSwCoreNotifyExtended NOTIFICATION-TYPE
+    OBJECTS         {
+                        sysName,
+                        cseSwCoresFileName,
+                        cseSwCorePath,
+                        cseSwCoresPID
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A notification is generated whenever a software
+        crash occurs and a core file is generated."
+   ::= { cseFailNotificationPrefix 2 }
+-- Conformance
+
+ciscoSystemExtMIBCompliances  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBConformance 1 }
+
+ciscoSystemExtMIBGroups  OBJECT IDENTIFIER
+    ::= { ciscoSystemExtMIBConformance 2 }
+
+
+ciscoSystemExtMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroup,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup
+                    }
+    ::= { ciscoSystemExtMIBCompliances 1 }
+
+ciscoSystemExtMIBComplianceRev1 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup
+                    }
+    ::= { ciscoSystemExtMIBCompliances 2 }
+
+ciscoSystemExtMIBComplianceRev2 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { ciscoSystemExtMIBCompliances 3 }
+
+ciscoSystemExtMIBComplianceRev3 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { ciscoSystemExtMIBCompliances 4 }
+
+ciscoSystemExtMIBComplianceRev4 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtInfoGroupRev2,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup,
+                        ciscoSystemExtNotificationGroupSup1,
+                        ciscoSystemExtHaGroupRev1
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { ciscoSystemExtMIBCompliances 5 }
+
+ciscoSystemExtMIBComplianceRev5 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtInfoGroupRev2,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup,
+                        ciscoSystemExtNotificationGroupSup1,
+                        ciscoSystemExtHaGroupRev1
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtInfoTelnetGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory if the
+        support of telnet device can be enabled/disabled 
+        by the system."
+    ::= { ciscoSystemExtMIBCompliances 6 }
+
+ciscoSystemExtMIBComplianceRev6 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement the
+        CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtInfoGroupRev2,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup,
+                        ciscoSystemExtHaGroupRev1
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtInfoTelnetGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup3
+    DESCRIPTION
+        "This group is mandatory if cseFailSwCoreNotifyExtended
+        notification is implemented."
+
+    GROUP           ciscoSystemExtNotificationGroupSup2
+    DESCRIPTION
+        "Implementation of this group is optional. Implementing one
+        of the two notifications cseFailSwCoreNotify or
+        cseFailSwCoreNotifyExtended will suffice."
+
+    GROUP           ciscoSystemExtNotificationGroupSup1
+    DESCRIPTION
+        "The implementation of cseShutDownNotify is mandatory.
+        However the implementation of cseFailSwCoreNotify is
+        optional. Implementing one of the two notifications
+        cseFailSwCoreNotify or cseFailSwCoreNotifyExtended will
+        suffice."
+
+    GROUP           ciscoSystemExtSwFailureControlGroup
+    DESCRIPTION
+        "Implementation of this group is optional.  Implementing of
+        this group is mandatory only when either
+        cseFailSwCoreNotify or cseFailSwCoreNotifyExtended
+        notification is implemented."
+    ::= { ciscoSystemExtMIBCompliances 7 }
+
+ciscoSystemExtMIBComplianceRev7 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev1,
+                        ciscoSystemExtInfoGroupRev2,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup,
+                        ciscoSystemExtNotificationGroupSup1,
+                        ciscoSystemExtHaGroupRev1
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtInfoTelnetGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtInfoFIPSGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { ciscoSystemExtMIBCompliances 8 }
+
+ciscoSystemExtMIBComplianceRev8 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which
+        implement the CISCO-SYTEM-EXT-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        ciscoSystemExtInfoGroupRev3,
+                        ciscoSystemExtInfoGroupRev2,
+                        ciscoSystemExtErrorGroup,
+                        ciscoSystemExtHaGroup,
+                        ciscoSystemExtNotificationGroup,
+                        ciscoSystemExtNotificationGroupSup1,
+                        ciscoSystemExtHaGroupRev1
+                    }
+
+    GROUP           ciscoSystemExtInfoGroupOptional
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtSwFailureGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtInfoTelnetGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           ciscoSystemExtInfoFIPSGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { ciscoSystemExtMIBCompliances 9 }
+
+-- Units of Conformance
+
+ciscoSystemExtInfoGroup OBJECT-GROUP
+    OBJECTS         {
+                        cseSysCPUUtilization,
+                        cseSysMemoryUtilization,
+                        cseSysConfLastChange
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects for system information."
+    ::= { ciscoSystemExtMIBGroups 1 }
+
+ciscoSystemExtErrorGroup OBJECT-GROUP
+    OBJECTS         {
+                        cseSnmpErrorCode,
+                        cseSnmpErrorDescription
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for logging SNMP set error."
+    ::= { ciscoSystemExtMIBGroups 2 }
+
+ciscoSystemExtHaGroup OBJECT-GROUP
+    OBJECTS         {
+                        cseHaRestartReason,
+                        cseHaRestartService,
+                        cseHaRestartStateless
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for High Availability."
+    ::= { ciscoSystemExtMIBGroups 3 }
+
+ciscoSystemExtNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS    { cseHaRestartNotify }
+    STATUS          current
+    DESCRIPTION
+        "A collection of notifications for the
+        High Availability."
+    ::= { ciscoSystemExtMIBGroups 4 }
+
+ciscoSystemExtInfoGroupRev1 OBJECT-GROUP
+    OBJECTS         {
+                        cseSysCPUUtilization,
+                        cseSysMemoryUtilization,
+                        cseSysConfLastChange,
+                        cseSysAutoSync,
+                        cseSysAutoSyncState
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects for system information."
+    ::= { ciscoSystemExtMIBGroups 5 }
+
+ciscoSystemExtInfoGroupOptional OBJECT-GROUP
+    OBJECTS         { cseWriteErase }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for system information
+        which are optional."
+    ::= { ciscoSystemExtMIBGroups 6 }
+
+ciscoSystemExtSwFailureGroup OBJECT-GROUP
+    OBJECTS         { cseSwCorePath }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for system software failure
+        information which are optional."
+    ::= { ciscoSystemExtMIBGroups 7 }
+
+ciscoSystemExtInfoGroupRev2 OBJECT-GROUP
+    OBJECTS         { cseSysConsolePortStatus }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for system information."
+    ::= { ciscoSystemExtMIBGroups 8 }
+
+ciscoSystemExtSwFailureGroup2 OBJECT-GROUP
+    OBJECTS         {
+                        cseSwCoresPID,
+                        cseSwCoresTimeCreated,
+                        cseSwCoresSlotNum
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for system software failure
+        information which are optional."
+    ::= { ciscoSystemExtMIBGroups 9 }
+
+ciscoSystemExtNotificationGroupSup1 NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        cseShutDownNotify,
+                        cseFailSwCoreNotify
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of notifications for the
+        system MIB."
+    ::= { ciscoSystemExtMIBGroups 10 }
+
+ciscoSystemExtHaGroupRev1 OBJECT-GROUP
+    OBJECTS         { cseHaShutDownReason }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for High Availability."
+    ::= { ciscoSystemExtMIBGroups 11 }
+
+ciscoSystemExtInfoTelnetGroup OBJECT-GROUP
+    OBJECTS         { cseSysTelnetServiceActivation }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects related to telnet support
+        to the device."
+    ::= { ciscoSystemExtMIBGroups 12 }
+
+ciscoSystemExtNotificationGroupSup2 NOTIFICATION-GROUP
+   NOTIFICATIONS    { cseFailSwCoreNotifyExtended }
+    STATUS          current
+    DESCRIPTION
+        "A collection of notification related to core file
+        creation."
+    ::= { ciscoSystemExtMIBGroups 13 }
+
+ciscoSystemExtSwFailureGroup3 OBJECT-GROUP
+    OBJECTS         { cseSwCoresFileName }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects related to the core file."
+    ::= { ciscoSystemExtMIBGroups 14 }
+
+ciscoSystemExtSwFailureControlGroup OBJECT-GROUP
+    OBJECTS         { ciscoSwFailureNotifEnable }
+    STATUS          current
+    DESCRIPTION
+        "This group of objects controls the sending of
+        notifications defined in this MIB module."
+    ::= { ciscoSystemExtMIBGroups 15 }
+
+ciscoSystemExtInfoFIPSGroup OBJECT-GROUP
+    OBJECTS         { cseSysFIPSModeActivation }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects related to FIPS support
+        to the device."
+    ::= { ciscoSystemExtMIBGroups 16 }
+
+ciscoSystemExtInfoGroupRev3 OBJECT-GROUP
+    OBJECTS         {
+                        cseSysCPUUtilization,
+                        cseSysMemoryUtilization,
+                        cseSysConfLastChange,
+                        cseSysAutoSync,
+                        cseSysAutoSyncState,
+                        cseSysUpTime
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for system information."
+    ::= { ciscoSystemExtMIBGroups 17 }
+
+END
+
diff --git a/snmp_builder/mibs/CISCO-TC b/snmp_builder/mibs/CISCO-TC
new file mode 100644
index 0000000..09b881c
--- /dev/null
+++ b/snmp_builder/mibs/CISCO-TC
@@ -0,0 +1,2407 @@
+-- *****************************************************************
+-- CISCO-TC.my:  Cisco MIB Textual Conventions
+--   
+-- May 1994, Jeffrey T. Johnson
+--   
+-- Copyright (c) 1994-2011 and by cisco Systems Inc.
+-- All rights reserved.
+--   
+-- ***************************************************************
+
+CISCO-TC DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    Gauge32,
+    Integer32,
+    Unsigned32,
+    Counter64
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    ciscoModules
+        FROM CISCO-SMI;
+
+
+ciscoTextualConventions MODULE-IDENTITY
+    LAST-UPDATED    "201106170000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-snmp@cisco.com"
+    DESCRIPTION
+        "This module defines textual conventions used throughout
+        cisco enterprise mibs."
+    REVISION        "201106170000Z"
+    DESCRIPTION
+        "-Added the following enums for FcIfOperStatusReason:
+        fcRedirectIsolation,
+        portActLicenseNotAvailable,
+        sdmIsolation,
+        fcidAllocationFailed,
+        unavailableNPVUpstreamPort,
+        unavailableNPVPrefUpstreamPort,
+        sfpReadError,
+        stickyDownOnLinkFailure,
+        tooManyLinkFlapsErr,
+        unidirectionalUDLD,
+        txRxLoopUDLD,
+        neighborMismatchUDLD,
+        authzPending,
+        hotStdbyInBundle,
+        incompleteConfig,
+        incompleteTunnelCfg,
+        hwProgrammingFailed,
+        tunnelDstUnreachable,
+        suspendByMtu,
+        sfpInvalid,
+        sfpAbsent,
+        portCapabilitiesUnknown,
+        channelErrDisabled,
+        vrfMismatch,
+        vrfForwardReferencing,
+        dupTunnelConfigDetected,
+        primaryVLANDown,
+        vrfUnusable,
+        errDisableHandShkFailure,
+        errDisabledBPDUGuard,
+        dot1xSecViolationErrDisabled,
+        emptyEchoUDLD,
+        vfTaggingCapErr,
+        portDisabled,
+        tunnelModeNotConfigured,
+        tunnelSrcNotConfigured,
+        tunnelDstNotConfigured,
+        tunnelUnableToResolveSrcIP
+        tunnelUnableToResolveDstIP,
+        tunnelVrfDown,
+        sifAdminDown,
+        phyIntfDown,
+        ifSifLimitExceeded,
+        sifHoldDown,
+        noFcoe,
+        dcxCompatMismatch,
+        isolateBundleLimitExceeded,
+        sifNotBound,
+        errDisabledLacpMiscfg,
+        satFabricIfDown,
+        invalidSatFabricIf,
+        noRemoteChassis,
+        vicEnableNotReceived,
+        vicDisableReceived,
+        vlanVsanMappingNotEnabled,
+        stpNotFwdingInFcoeMappedVlan,
+        moduleOffline,
+        udldAggModeLinkFailure,
+        stpInconsVpcPeerDisabled,
+        setPortStateFailed,
+        suspendedByVpc,
+        vpcCfgInProgress,
+        vpcPeerLinkDown,
+        vpcNoRspFromPeer,
+        protoPortSuspend,
+        tunnelSrcDown,
+        cdpInfoUnavailable,
+        fexSfpInvalid,
+        errDisabledIpConflict,
+        fcotClkRateMismatch,
+        portGuardTrustSecViolation,
+        sdpTimeout,
+        satIncompatTopo,
+        waitForFlogi,
+        satNotConfigured,
+        npivNotEnabledInUpstream,
+        vsanMismatchWithUpstreamSwPort,
+        portGuardBitErrRate,
+        portGuardSigLoss,
+        portGuardSyncLoss,
+        portGuardLinkReset,
+        portGuardCreditLoss,
+        bitErrorRate,
+        signalLoss,
+        syncLoss,
+        linkReset,
+        creditLoss,
+        ipQosMgrPolicyAppFailure,
+        pauseRateLimitErrDisabled,
+        lstGrpUplinkDown,
+        stickyDnLinkFailure,
+        routerMacFailure,
+        dcxMultipleMsapIds,
+        dcxHundredPdusRcvdNoAck,
+        enmSatIncompatibleUplink,
+        enmLoopDetected,
+        nonStickyExternallyDisabled,
+        subGroupIdNotAssigned,
+        vemUnlicensed,
+        profileNotFound,
+        nonExistentVlan,
+        vlanInvalidType,
+        vlanDown,
+        vpcPeerUpgrade,
+        ipQosDcbxpCompatFailure,
+        nonCiscoHbaVfTag,
+        domainIdConfigMismatch,
+        sfpSpeedMismatch,
+        xcvrInitializing,
+        xcvrAbsent,
+        xcvrInvalid,
+        vfcBindingInvalid,
+        vlanNotFcoeEnabled,
+        pvlanNativeVlanErr,
+        ethL2VlanDown,
+        ethIntfInvalidBinding,
+        pmonFailure,
+        l3NotReady,
+        speedMismatch,
+        flowControlMismatch,
+        vdcMode,
+        suspendedDueToMinLinks,
+        enmPinFailLinkDown,
+        inactiveM1PortFpathActiveVlan,
+        parentPortDown,
+        moduleRemoved,
+        corePortMct,
+        nonCorePortMct,
+        ficonInorderNotActive,
+        invalidEncapsulation,
+        modemLineDeasserted,
+        ipSecHndshkInProgress,
+        sfpEthCompliantErr,
+        cellularModemUnattached,
+        outOfGlblRxBuffers,
+        sfpFcCompliantErr,
+        ethIntfNotLicensed,
+        domainIdsInvalid,
+        fabricNameInvalid."
+    REVISION        "201002240000Z"
+    DESCRIPTION
+        "Added CiscoURLStringOrEmpty textual convention."
+    REVISION        "200906180000Z"
+    DESCRIPTION
+        "Added the new textual convention CiscoVrfName"
+    REVISION        "200903100000Z"
+    DESCRIPTION
+        "Added the new textual convention CiscoInterfaceIndexList"
+    REVISION        "200902260000Z"
+    DESCRIPTION
+        "Added the new textual convention Cisco2KVlanList"
+    REVISION        "200804020000Z"
+    DESCRIPTION
+        "Added the new textual convention CiscoBridgeDomain."
+    REVISION        "200702150000Z"
+    DESCRIPTION
+        "Added following textual conventions:
+        CiscoVlanList,
+        CiscoCosList, 
+        CiscoPbbServiceIdentifier"
+    REVISION        "200607060000Z"
+    DESCRIPTION
+        "Added the following enums to IfOperStatusReason:
+        - elpFailureAllZeroPeerWWNRcvd,
+        - preferredPathIsolation."
+    REVISION        "200604130000Z"
+    DESCRIPTION
+        "Added enumeration to IfOperStatusReason from 113-131
+        ('dpvmVsanSuspended' to 'domainOther')."
+    REVISION        "200506240000Z"
+    DESCRIPTION
+        "Added CvE164Address textual convention."
+    REVISION        "200506160000Z"
+    DESCRIPTION
+        "Added following textual conventions:
+        CiscoURLString
+        CiscoHTTPResponseStatusCode
+        EntLogicalIndexOrZero."
+    REVISION        "200410110000Z"
+    DESCRIPTION
+        "Added IfOperStatusReason textual convention."
+    REVISION        "200406080000Z"
+    DESCRIPTION
+        "Added CiscoPortListRange textual convention."
+    REVISION        "200404140000Z"
+    DESCRIPTION
+        "Added CiscoPortList textual convention.
+        Removed Unsigned32 textual convention."
+    REVISION        "200212180000Z"
+    DESCRIPTION
+        "Changed MilliSeconds TC to CiscoMilliSeconds as it was
+        overlapping with the one in a standard MIB."
+    REVISION        "200212121600Z"
+    DESCRIPTION
+        "Added the 'http' enumeration to CiscoNetworkProtocol."
+    REVISION        "200212020000Z"
+    DESCRIPTION
+        "Added Unsigned64 textual convention."
+    REVISION        "200209220000Z"
+    DESCRIPTION
+        "Added ListIndex, ListIndexOrZero, TimeIntervalSec,
+        TimeintervalMin, MicroSeconds and MicroSeconds TC from 
+        Andiamo's TC MIB ."
+    REVISION        "200209170000Z"
+    DESCRIPTION
+        "Added ConfigIterator & BulkConfigResult textual
+        convention for bulk provisioning.
+        Added CountryCodeITU textual convention for ITU-T defined
+        country codes for non-standard facilities."
+    REVISION        "200204160000Z"
+    DESCRIPTION
+        "Added PerfHighIntervalCount TEXTUAL-CONVENTION."
+    REVISION        "200107070000Z"
+    DESCRIPTION
+        "Added enumerations to CiscoNetworkProtocol"
+    REVISION        "200101180000Z"
+    DESCRIPTION
+        "Added CiscoAlarmSeverity textual convention.
+        Changed SAPType display hint to d.  Changed
+        INTEGER to Integer32 in CiscoPort and
+        CiscoIpProtocol TCs.  Changed SnmpAdminString
+        to OCTET STRING in CiscoLocationSpecifier.
+        Removed IMPORTs for ciscoProducts and
+        SnmpAdminString."
+    REVISION        "200011210000Z"
+    DESCRIPTION
+        "Added CiscoLocationClass, CiscoLocationSpecifier
+        CiscoInetAddressMask, CiscoAbsZeroBasedCounter32, 
+        CiscoSnapShotAbsCounter32 textual conventions."
+    REVISION        "9810280000Z"
+    DESCRIPTION
+        "Added CiscoRowOperStatus, EntPhysicalIndexOrZero,
+        Port and IpProtocol textual conventions."
+    REVISION        "9703130000Z"
+    DESCRIPTION
+        "Added SAPType, CountryCode textual convention."
+    REVISION        "9608140000Z"
+    DESCRIPTION
+        "Added InterfaceIndexOrZero textual convention."
+    REVISION        "9607080000Z"
+    DESCRIPTION
+        "Added new CiscoNetworkProtocol enumerations."
+    REVISION        "9602220000Z"
+    DESCRIPTION
+        "Added Unsigned32 textual conventions."
+    REVISION        "9506070000Z"
+    DESCRIPTION
+        "Miscellaneous updates/corrections, including making
+        CiscoNetworkProtocol enumerations contiguous."
+    ::= { ciscoModules 1 }
+
+
+
+Layer2Cos ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An integer that is in the range of the layer 2 CoS values. It
+        corresponds to the IEEE 802.1P CoS value which defines eight
+        (2^3) user priority levels.
+        Note: the IEEE 802.1P has been merged into IEEE 802.1D."
+
+    REFERENCE
+        "IEEE 802.1D, 2004 Edition, Annex G User priorities and traffic
+            classes."
+    SYNTAX          Integer32 (0..7)
+
+CiscoNetworkProtocol ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents the different types of network layer protocols."
+    SYNTAX          INTEGER  {
+                        ip(1),
+                        decnet(2),
+                        pup(3),
+                        chaos(4),
+                        xns(5),
+                        x121(6),
+                        appletalk(7),
+                        clns(8),
+                        lat(9),
+                        vines(10),
+                        cons(11),
+                        apollo(12),
+                        stun(13),
+                        novell(14),
+                        qllc(15),
+                        snapshot(16),
+                        atmIlmi(17),
+                        bstun(18),
+                        x25pvc(19),
+                        ipv6(20),
+                        cdm(21),
+                        nbf(22),
+                        bpxIgx(23),
+                        clnsPfx(24),
+                        http(25),
+                        unknown(65535)
+                    }
+
+CiscoNetworkAddress ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents a network layer address.  The length and format of
+        the address is protocol dependent as follows:
+        ip        4 octets
+        decnet    2 octets
+        pup       obsolete
+        chaos     2 octets
+        xns       10 octets
+                  first 4 octets are the net number
+                  last 6 octets are the host number
+        x121    
+        appletalk 3 octets
+                  first 2 octets are the net number
+                  last octet is the host number
+        clns
+        lat
+        vines     6 octets
+                  first 4 octets are the net number
+                  last 2 octets are the host number
+        cons
+        apollo    10 octets
+                  first 4 octets are the net number
+                  last 6 octets are the host number
+        stun      8 octets
+        novell    10 octets
+                  first 4 octets are the net number
+                  last 6 octets are the host number
+        qllc      6 octets
+        bstun     1 octet - bi-sync serial tunnel 
+        snapshot  1 octet
+        atmIlmi   4 octets
+        x25 pvc   2 octets (12 bits)
+        ipv6      16 octets
+        cdm
+        nbf
+        bgpIgx
+        clnsPfx  upto 20 octets
+        http     upto 70 octets
+                 first 4 octets are the IPv4 host 
+                 address
+                 next 2 octets are the TCP port 
+                 number
+                 remaining(1 upto 64) octets are 
+                 the URI"
+    SYNTAX          OCTET STRING
+
+Unsigned64 ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An unsigned 64 bit integer. We use SYNTAX Counter64 for the
+        encoding rules."
+    SYNTAX          Counter64
+
+InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Either the value 0, or the ifIndex value of an
+        interface in the ifTable."
+    SYNTAX          Integer32 (0..2147483647)
+
+SAPType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Service Access Point - is a term that denotes the means
+        by which a user entity in layer n+1 accesses a service
+        of a provider entity in layer n."
+    SYNTAX          Integer32 (0..254)
+
+CountryCode ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents a case-insensitive 2-letter country code taken
+        from ISO-3166. Unrecognized countries are represented as 
+        empty string."
+    SYNTAX          OCTET STRING (SIZE (0 | 2))
+
+CountryCodeITU ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention represents a country or area code for
+        non-standard facilities in telematic services."
+
+    REFERENCE       "ITU-T T.35 - Section 3.1 Country Code"
+    SYNTAX          Unsigned32 (0..255)
+
+EntPhysicalIndexOrZero ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention is an extension of entPhysicalIndex.
+        If non-zero, the object is an entPhysicalIndex. If zero, no
+        appropriate entPhysicalIndex exists. Any additional semantics
+        are object specific."
+    SYNTAX          Integer32 (0..2147483647)
+
+CiscoRowOperStatus ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents the operational status of an table entry.
+        This textual convention allows explicitly representing
+        the states of rows dependent on rows in other tables.
+
+        active(1) -
+            Indicates this entry's RowStatus is active
+            and the RowStatus for each dependency is active.
+
+        activeDependencies(2) -
+            Indicates that the RowStatus for each dependency
+            is active, but the entry's RowStatus is not active.
+
+        inactiveDependency(3) -
+            Indicates that the RowStatus for at least one
+            dependency is not active.
+
+        missingDependency(4) -
+            Indicates that at least one dependency does
+            not exist in it's table."
+    SYNTAX          INTEGER  {
+                        active(1),
+                        activeDependencies(2),
+                        inactiveDependency(3),
+                        missingDependency(4)
+                    }
+
+CiscoPort ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The TCP or UDP port number range."
+
+    REFERENCE
+        "Transmission Control Protocol. J. Postel. RFC793,
+            User Datagram Protocol. J. Postel. RFC768"
+    SYNTAX          Integer32 (0..65535)
+
+CiscoIpProtocol ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "IP protocol number range."
+
+    REFERENCE       "Internet Protocol. J. Postel. RFC791"
+    SYNTAX          Integer32 (0..255)
+
+CiscoLocationClass ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An enumerated value which provides an indication of
+        the general location type of a particular physical and/or
+        logical interface.
+        chassis - a system framework for mounting one or more 
+                  shelves/slots/cards.
+        shelf - a cabinet that holds one or more slots.
+        slot -  card or subSlot holder.
+        subSlot - daughter-card holder.
+        port - a physical port (e.g., a DS1 or DS3 physical port).
+        subPort - a logical port on a physical port (e.g., a DS1 
+                  subPort on a DS3 physical port).
+        channel - a logical interface (e.g., a DS0 channel, signaling
+                  channel, ATM port, other virtual interfaces).
+        subChannel - a sub-channel on a logical interface."
+    SYNTAX          INTEGER  {
+                        chassis(1),
+                        shelf(2),
+                        slot(3),
+                        subSlot(4),
+                        port(5),
+                        subPort(6),
+                        channel(7),
+                        subChannel(8)
+                    }
+
+CiscoLocationSpecifier ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Use this TC to define objects that indicate the
+        physical entity and/or logical interface location 
+        of a managed entity on a managed device. In SNMP, a 
+        standard mechanism for indicating the physical location
+        of entities is via the ENTITY-MIB. However, that approach
+        is not satisfactory in some cases because:
+
+        1. The entity requiring a location-based naming may be 
+           associated with an entity which can not be represented 
+           as a physical entity in the ENTITY-MIB,
+        2. NMS applications may desire a more direct 
+           name/representation of a physical entity than is 
+           available via the ENTITY-MIB, e.g., a physical entity
+           which is named via a hierarchy of levels in the ENTITY-MIB.
+
+        The value of an object defined using this TC is an ASCII 
+        string consisting of zero or more elements separated by 
+        commas. Each element is of the form  = . 
+
+        An example of this syntax is 'slot=5,port=3'.
+
+        The syntax of the string is formally specified using
+        ABNF notation (with one exception, noted below), as
+        follows:                 
+
+        location-specifier =  elem *(',' elem) 
+                       ; subject to 
+                       ; size restriction specified in the SYNTAX
+                       ; clause below
+
+        elem    =   loctype '=' number
+
+        number  = %x00-FFFFFFFF / %d0-4294967295
+
+        loctype = 1*32VCHAR 
+
+        It is recommended that loctype use one of the enumerated
+        labels defined for CiscoLocationClass.
+
+        (NOTE: To conform to ABNF notation as defined in RFC2234, 
+         substitute the single-quote symbol with a double-quote 
+         symbol in the above rules.)
+
+        A zero length of CiscoLocationSpecifier is object-specific
+        and must be defined as part of the description of any object
+        which uses this syntax."
+
+    REFERENCE
+        "RFC2234, Augmented BNF for syntax specifications: ABNF"
+    SYNTAX          OCTET STRING (SIZE (0..255))
+
+CiscoInetAddressMask ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Denotes a generic Internet subnet address mask.
+        The Internet subnet address mask is represented as the
+        number of contiguous 1-bit from MSB (most significant bit)
+        of the Internet subnet address mask.
+        A CiscoInetAddressMask value is always interpreted within
+        the context of an InetAddressType value. The 
+        InetAddressType only object or InetAddressType with
+        InetAddress objects which define the context must be
+        registered immediately before the object which uses the
+        CiscoInetAddressMask textual convention.  In other words,
+        the object identifiers for the InetAddressType object and
+        the CiscoInetAddressMask object MUST have the same length
+        and the last sub-identifier of the InetAddressType object
+        MUST be 1 less than the last sub-identifier of the 
+        CiscoInetAddressMask object and MUST be 2 less than the
+        last sub-identifier of the CiscoInetAddressMask object if
+        an InetAddress object is defined between InetAddressType
+        and CiscoInetAddressMask objects.
+        The maximum value of the CiscoInetAddressMask TC is 32 for
+        the value 'ipv4(1)' in InetAddressType object and 128 for
+        the value 'ipv6(2)' in InetAddressType object.
+        The value zero is object-specific and must therefore be
+        defined as part of the description of any object which
+        uses this syntax.  Examples of the usage of zero might
+        include situations where Internet subnet mask was unknown,
+        or when none subnet masks need to be referenced."
+
+    REFERENCE
+        "RFC2851, Textual Conventions for Internet Network Addresses."
+    SYNTAX          Unsigned32 (0..128)
+
+CiscoAbsZeroBasedCounter32 ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This TC describes an object which counts events with the
+        following semantics: objects of this type will be set to
+        zero(0) on creation and will thereafter count appropriate
+        events, it locks at the maximum value of 4,294,967,295 if
+        the counter overflows.
+        This TC may be used only in situations where wrapping is
+        not possible or extremely unlikely situation."
+    SYNTAX          Gauge32
+
+CiscoSnapShotAbsCounter32 ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This TC describes an object which stores a snap-shot value
+        with the following semantics: objects of this type will
+        take a snap-shot value from their associated
+        CiscoAbsZeroBasedCounter32 type objects on creation."
+    SYNTAX          Unsigned32
+
+CiscoAlarmSeverity ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents the perceived alarm severity associated
+        with a service or safety affecting condition and/or
+        event.  These are based on ITU severities, except
+        that info(7) is added.
+
+            cleared(1) -
+                Indicates a previous alarm condition has been
+                cleared.  It is not required (unless specifically
+                stated elsewhere on a case by case basis) that an
+                alarm condition that has been cleared will produce
+                a notification or other event containing an
+                alarm severity with this value.
+
+            indeterminate(2) -
+                Indicates that the severity level cannot be
+                determined. 
+
+            critical(3) -
+                Indicates that a service or safety affecting
+                condition has occurred and an immediate
+                corrective action is required.
+
+            major(4) -
+                Indicates that a service affecting condition has
+                occurred and an urgent corrective action is
+                required.
+
+            minor(5) -
+                Indicates the existence of a non-service affecting
+                condition and that corrective action should be
+                taken in order to prevent a more serious (for
+                example, service or safety affecting) condition.
+
+            warning(6) -
+                Indicates the detection of a potential or impending
+                service or safety affecting condition, before any
+                significant effects have been felt.
+
+            info(7) -
+                Indicates an alarm condition that does not
+                meet any other severity definition.  This can
+                include important, but non-urgent, notices or
+                informational events."
+
+    REFERENCE       "ITU-X.733"
+    SYNTAX          INTEGER  {
+                        cleared(1),
+                        indeterminate(2),
+                        critical(3),
+                        major(4),
+                        minor(5),
+                        warning(6),
+                        info(7)
+                    }
+
+PerfHighIntervalCount ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "A 64 bit counter associated with a
+        performance measurement in a previous
+        15 minute measurement interval. In the
+        case where the agent has no valid data
+        available for a particular interval the
+        corresponding object instance is not
+        available and upon a retrieval request
+        a corresponding error message shall be
+        returned to indicate that this instance
+        does not exist (for example, a noSuchName
+        error for SNMPv1 and a noSuchInstance for
+        SNMPv2 GET operation).
+        In a system supporting
+        a history of n intervals with
+        IntervalCount(1) and IntervalCount(n) the
+        most and least recent intervals
+        respectively, the following applies at
+        the end of a 15 minute interval:
+            - discard the value of IntervalCount(n)
+            - the value of IntervalCount(i) becomes that
+              of IntervalCount(i-1) for n >= i > 1
+            - the value of IntervalCount(1) becomes that
+              of CurrentCount
+            - the TotalCount, if supported, is adjusted.
+
+        This definition is based on CounterBasedGauge64 TEXTUAL
+        CONVENTION  defined in RFC2856. The PerfHighIntervalCount
+        type represents a non-negative
+        integer, which may increase or decrease, but shall never
+        exceed a maximum value, nor fall below a minimum value. The
+        maximum value can not be greater than 2^64-1
+        (18446744073709551615 decimal), and the minimum value can
+        not be smaller than 0.  The value of a PerfHighIntervalCount,
+        has its maximum value whenever the information being modeled
+        is greater than or equal to its maximum value, and has its
+        minimum value whenever the information being modeled is
+        smaller than or equal to its minimum value.  If the
+        information being modeled subsequently decreases below
+        (increases above) the maximum (minimum) value, the
+        PerfHighIntervalCount also decreases (increases).
+
+        Note that this TC is not strictly supported in SMIv2,
+        because the 'always increasing' and 'counter wrap' semantics
+        associated with the Counter64 base type are not preserved.
+        It is possible that management applications which rely
+        solely upon the (Counter64) ASN.1 tag to determine object
+        semantics will mistakenly operate upon objects of this type
+        as they would for Counter64 objects.
+
+        This textual convention represents a limited and short-term
+        solution, and may be deprecated as a long term solution is
+        defined and deployed to replace it."
+
+    REFERENCE
+        "RFC 2856(HCNUM-TC MIB).
+            RFC 2493(PerfHist-TC-MIB)."
+    SYNTAX          Counter64
+
+ConfigIterator ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This object type is a control object type which applies to
+        writable objects in the same SNMP PDU related to the
+        same table containing those objects. It controls an 
+        operation which repeatedly applies the specified 
+        configuration data to more than one rows in a table. 
+        The operation starts from the row specified by the index 
+        of the instance and repeats for the number of rows as 
+        the value of the object. 
+
+        ConfigIterator object needs to be accompanied by one set of
+        writable objects which are of the same instance to apply to.
+
+        For example, a SNMP PDU contains 
+           { objectA.10 = 1, 
+             objectB.10 = 'E1',
+             objectC.10 = 44,
+             objectRepetition.10 = 100 }
+
+        The SYNTAX of objectRepetition is ConfigIterator.
+        This will apply value 1 to objectA, value 'E1' to objectB,
+        value 44 to objectC in the table starting from row 10 
+        repeatedly for 100 rows.
+
+        The iteration is based on the number of rows, not based on
+        the value of the index. For sparse tables, the index 10, 
+        20, 30, 110, and 120 counts for 5 rows, the operation will 
+        go beyond index 100 in the previous SNMP PDU example.
+
+        The iteration will stop prematurely when it comes to the 
+        following situations:
+        (1) When the number of the rows in the table is less than
+            the designated row indicated by the ConfigIterator 
+            object. 
+        (2) When it encounters the first error in any row, the 
+            operation won't continue to next row.
+
+        The operation of ConfigIterator object applies only to
+        the writable objects having the same index as the
+        ConfigIterator object in one SNMP PDU.
+
+        For example, a SNMP PDU contains
+           { objectD.5 = 38,
+             objectE.6 = 'T1',
+             objectF.5 = 'false',
+             objectIterator.5 = 10 }
+
+        The SYNTAX of objectIterator is ConfigIterator.
+        This will apply value 38 to objectD, value 'false' to 
+        objectF in the table starting from row 5 repeatedly 
+        for 10 rows. Since the object objectE.6 has different
+        index (6) from the index of objectIterator, the 
+        repetition won't be applied to it. However the value 
+        of objectE in the row 6 will be set to 'T1' according
+        to regular SNMP SET orperation. 
+
+        If there is row overlapping of the iteration in a SNMP PDU,
+        it will be operated as they are in two different SNMP PDUs.
+
+        For example, a SNMP PDU contains
+           { objectD.5 = 38,
+             objectD.6 = 40,
+             objectE.6 = 'T1',
+             objectF.5 = 'false',
+             objectIterator.5 = 10
+             objectIterator.6 = 10 }
+
+        This will apply value 38 to objectD, value 'false' to 
+        objectF starting from row 5 repeatedly for 10 rows, and
+        apply value 40 to objectD, value 'T1' to objectE starting
+        from row 6 repeatedly for 10 rows. The final value of 
+        objectD.6 can be 38 or 40, it depends on the SNMP stack of
+        the system starts SNMP SET for the row 5 before the row 6 
+        or the other way around.
+
+        The object defined as ConfigIterator will be set to value 1 
+        after the iteration operation is kick-off regardless the 
+        system has completed the operation to the designated rows 
+        or not. Therefore retrieving the value of this object 
+        is meaningless. It acts as the one time operation for 
+        bulk configuration.
+
+        The object defined as ConfigIterator has no meaning by itself,
+        it has to be combined with one or more than one writable 
+        objects from the same table and within the same SNMP PDU
+        for the repetition operation.
+
+        For example, a SNMP PDU contains
+           { objectG.2 = 49,
+             objectH.2 = 'AE'h
+             objectIterator.4 = 20 }
+
+        The SYNTAX of objectIterator is ConfigIterator. Since
+        there are no objects having the same index as the index
+        of objectIterator in the PDU, the result of this SNMP 
+        operation will set value 49 to objectG and value 0xAE 
+        to objectH of the row 2 only as regular SNMP SET operation.
+
+        The index of the instance indicates the starting row for the
+        iteration. 
+        The order of the iteration depends, for instance, on: 
+        (1) physical hardware position, or
+        (2) logical index.
+
+        It depends on the characters of the table which contains
+        the ConfigIterator object.
+
+        Iteration can be done through some or all the components
+        of the index for a table. The description of the iterator
+        object in that table should describe which part of the 
+        index the iteration is applied to.
+
+        The operation for this object type is based on the best
+        effort. When the agent receives a SNMP PDU containing this 
+        data type, the return status of the SNMP request reflects 
+        only the result of the SET operation has applied to the 
+        starting row. It may return a SNMP response with SUCCESS 
+        status regardless the number of rows for the data actually 
+        been deployed later on. Therefore it is possible the data 
+        might not be completely deployed to the number of rows
+        designated by the ConfigIterator and the operation stops 
+        prematurely due to an error it first encounters after 
+        n rows (n < the value of ConfigIterator object).
+
+        Usually the error report mechanism for this type of operation
+        is accomplished by combining this type of object with the
+        other two objects in the same table:
+
+        (1) An OwnerString object
+        (2) An object indicates the result of the operation.
+
+        When issuing this bulk configuration request, the SNMP 
+        manager should provide its identifier in (1) object.
+        After issuing the request, it should check the value of (1) 
+        object if it is the same with it own name.
+        If they are the same, then the value of the object presents
+        in (2) is the result from the previous operation from this
+        manager. Otherwise, another SNMP manager might issue
+        the bulk configuration to the same table before the previous
+        bulk operation has been completed. These two objects will 
+        represent the last bulk operation in the table."
+    SYNTAX          Unsigned32 (1..4294967295)
+
+BulkConfigResult ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention defines the format of the
+        displayable textual result from the bulk configuration
+        operation specified as ConfigIterator type.
+
+        The format should be: 
+        'COMPLETION=          error occured>/,
+         ERROR=/:
+         '
+
+        For example:
+        'COMPLETION=22/100,ERROR=38/44:Invalid Ds1 line coding 
+         for the line type'"
+    SYNTAX          OCTET STRING (SIZE (0..255))
+
+ListIndex ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "A unique value greater than zero, for each of the
+        list that is defined. The object using this 
+        convention should give all the object specific 
+        details including the list type."
+    SYNTAX          Integer32 (1..2147483647)
+
+ListIndexOrZero ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention is an extension of the
+        ListIndex. In addition to the ListIndex range, 
+        this also includes 0 in its range of values. 
+        This value could be object specific and 
+        should be given the description of that object. 
+        In most cases, a value 0 means that the it does 
+        not represent any lists."
+    SYNTAX          Integer32 (0..2147483647)
+
+TimeIntervalSec ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "A period of time, measured in units of 1 second."
+    SYNTAX          Unsigned32
+
+TimeIntervalMin ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "A period of time, measured in units of 1 minute."
+    SYNTAX          Unsigned32
+
+CiscoMilliSeconds ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents time unit value in milliseconds."
+    SYNTAX          Unsigned32
+
+MicroSeconds ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Represents time unit value in microseconds."
+    SYNTAX          Unsigned32
+
+CiscoPortList ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Each octet within this value specifies a set of eight
+        ports. The object defined by this textual convention
+        can specify a port range of 2k ports in its description.
+        Example: 1 - 2048, 2049 - 4096, etc. The first octet 
+        represents the first 8 ports of the range of ports
+        specified by the object, the second octet represents 
+        the next 8 ports, etc. When a port range is not
+        specified, a default port range of '1 - 2048' is assumed.
+
+        Within each octet, the most significant bit represents
+        the lowest numbered port, and the least significant bit
+        represents the highest numbered port. Thus, each port
+        of the bridge is represented by a single bit within the
+        value of this object.  If that bit has a value of '1'
+        then that port is included in the set of ports; the port
+        is not included if its bit has a value of '0'.
+
+        Note that if the length of this string is less than
+        256 octets, any 'missing' octets are assumed to contain
+        the value zero. An NMS may omit any zero-valued octets
+        from the end of this string in order to reduce SetPDU size,
+        and the agent may also omit zero-valued trailing octets,
+        to reduce the size of GetResponse PDUs."
+    SYNTAX          OCTET STRING (SIZE (0..256))
+
+CiscoPortListRange ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Indicates the port range.
+
+        oneto2K(1) indicates that the port number range is
+        from 1 to 2048.
+
+        twoKto4K(2) indicates that the port number range is
+        from 2049 to 4096.
+
+        fourKto6K(3) indicates that the port number range is
+        from 4097 to 6144.
+
+        sixKto8K(4) indicates that the port number range is
+        from 6145 to 8192.
+
+        eightKto10K(5) indicates that the port number range is
+        from 8193 to 10240.
+
+        tenKto12K(6) indicates that the port number range is
+        from 10241 to 12288.
+
+        twelveKto14K(7) indicates that the port number range is
+        from 12289 to 14336.
+
+        fourteenKto16K(8) indicates that the port number range is
+        from 14337 to 16384.
+
+        When an object is defined with this textual convention,
+        it must be accompanied by an object of CiscoPortList
+        syntax."
+    SYNTAX          INTEGER  {
+                        oneto2k(1),
+                        twoKto4K(2),
+                        fourKto6K(3),
+                        sixKto8K(4),
+                        eightKto10K(5),
+                        tenKto12K(6),
+                        twelveKto14K(7),
+                        fourteenKto16K(8)
+                    }
+
+IfOperStatusReason ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The cause of current operational state of the
+        interface.
+
+        GLOSSARY:
+
+                BB        - Buffer-to-Buffer.
+
+        BB_Credit - Buffer-to-Buffer credit, a link level flow
+                    control mechanism.
+
+        B_Port    - A Fibre Channel, Bridging port.
+
+        BPDU      - Bridge Protocol Data Unit.
+
+        CDP       - Cisco Discovery Protocol.
+
+        Class F   - A connectionless service with notification on 
+                    non-delivery between E_Ports, used for control, 
+                    coordination, and configuration of the Fabric.
+
+        Class N   - Refers to any class of service (different types
+                    of frame delivery services) other than Class F.
+
+        E_D_TOV   - Error Detect Timeout Value.
+
+        ENM       - Egress Non-Multicast.
+
+        ELP       - Exchange Link Parameter.
+
+        E-mode    - A fibre channel port providing E_Port 
+                    functionality. 
+
+        E_Port    - A Fabric Expansion Port.  
+
+        EPP       - Exchange Peer Parameters.
+
+        ESC       - Exchange Switch Capabilities.
+
+        Fabric    - The set of physically connected fibre channel
+                    switches.
+
+        FEX       - Fabric EXtender.
+
+        FC-FS     - Fibre Channel Framing and Signaling.
+
+        FCIP      - Fibre Channel over IP protocol.
+
+        FCID      - Fibre Channel Domain ID.
+
+        FCOE      - Fibre Channel Over Ethernet.
+
+        FCOT      - Fibre channel optical transmitter.
+
+        FC-PH     - The Fibre Channel Physical and Signaling 
+                    standard.
+
+        FCSP      - Fibre Channel Security Protocol. 
+
+        Fibre Channel - The primary protocol for building SANs. 
+
+        FICON     - An I\O protocol used between IBM (and compatible) 
+                    mainframes and storage.
+
+        FLOGI     - Fabric Login, used by a node port to establish a
+                    session with the fabric.
+
+        GBIC      - Gigabit Interface Converter; a removable 
+                    transceiver module permitting Fibre Channel and 
+                    Gigabit Ethernet physical-layer transport.
+
+        Interconnect_Ports - Switch Ports that assume either the
+                    E_Port or B_Port mode are generally referred to 
+                    as Interconnect_Ports.
+
+        LACP      - Link Access Control Protocol.
+
+        LIP       - Loop Initialization Primitive sequence.
+
+        LR        - Link Reset, the FC-PH defined primitive sequence 
+                    used to initiate a link reset.
+
+        MTU       - Maximun transmission unit. 
+
+        NOS       - Not Operational Sequence, the FC-PH defined 
+                    primitive sequence to indicate that the 
+                    transmitting port has detected a link failure (or)
+                    offline condition.
+
+        VIC       - Virtual Interface Card.
+
+        VPC       - Virtual Port Channel.
+
+        NPIV      - N Port Identifier Virtualization.
+
+        NPV       - NPort Virtualizer.
+
+        Nx_Port   - A Fiber Channel Node Port. 
+
+        OLS       - Offline Sequence, the FC-PH defined primitive 
+                    sequence to indicate that the port is entering
+                    into offline state.
+
+        OHMS      - Online Health Management System.
+
+        PMON      - Port Monitor.
+
+        R_A_TOV   - Resource Allocation Timeout Value.
+
+        RCF       - Reconfigure Fabric. 
+
+        Rxbbcredit - Receive BB credit value configured for 
+                     a FC interface.
+
+        SAN       - Storage Area Network; a network linking computing 
+                    devices to disk or tape arrays and other devices 
+                    over Fibre Channel.
+
+        SIF       - Service Information Field.
+
+        SDM       - Security Device Manager.
+
+        SDP       - Secure Device Provisioning.
+
+        SFP       - Small Formfactor Pluggable.
+
+        TE_Port   - Trunking E_Port.
+
+        TOV       - Time out value.
+
+        UDLD      - Uni Directional Link Detection.
+
+        VDC       - Virtual Device Context.
+
+        VEM       - Virtual Ethernet Module.
+
+        VFC       - Virtual Fibre Channel.
+
+        VRF       - VPN Routing and Forwarding.
+
+        VSAN      - Virtual Storage Area Network.
+
+        WWN       - World Wide Name.
+
+        xE_Port   - A Fiber channel port that can assume either 
+                    E_Port or TE_Port mode.
+
+        The enumerated values which provides the cause of the current
+        operational state of the interface are,
+
+           'other(1)' - reasons other than defined here.
+
+           'none(2)' - no failure.
+
+           'hwFailure(3)' - hardware failure.  
+
+           'loopbackDiagFailure(4)' - loopback diagnostics failure.
+
+           'errorDisabled(5)' - the port is not operational due to 
+               some error conditions that require administrative 
+               attention.
+
+           'swFailure(6)' - software failure.
+
+           'linkFailure(7)' - physical link failure.
+
+           'offline(8)' -  physical link is in offline state as 
+               defined in the FC-FS standards.
+
+           'nonParticipating(9)' - during loop initialization, the 
+               port is not allowed to participate in loop operations.
+
+           'initializing(10)' - port is being initialized. 
+
+           'vsanInactive(11)'- port VSAN is inactive. The port becomes 
+               operational again when the port VSAN is active. 
+
+           'adminDown(12)' - ifAdminStatus is 'down'.
+
+           'channelAdminDown(13)' - this port is a member of a port 
+               channel and that port channel's ifAdminStatus is 
+               'down'. 
+
+           'channelOperSuspended(14)' - this port is a member of a 
+               port channel and its operational parameters are 
+               incompatible with the port channel parameters.  
+
+           'channelConfigurationInProgress(15)' - this port is 
+               undergoing a port channel configuration.
+
+           'rcfInProgress(16)' - an isolated xE_port is transmitting 
+               an reconfigure fabric, requesting a disruptive 
+               reconfiguration in an attempt to build a single, 
+               non-isolated fabric. Only the Interconnect_Ports can 
+               become isolated. 
+
+           'elpFailureIsolation(17)' - during a port initialization 
+               the prospective Interconnect_Ports find incompatible 
+               link parameters.
+
+           'escFailureIsolation(18) - during a port initialization the 
+               prospective Interconnect_Ports are unable to proceed 
+               with initialization as a result of ESC.
+
+           'domainOverlapIsolation(19)' - there is a overlap in 
+               domains while attempting to connect two existing 
+               fabrics.
+
+           'domainAddrAssignFailureIsolation(20)' - the elected 
+               principal switch is not capable of performing domain 
+               address manager functions so no Nx_port traffic can be 
+               forwarded across switches, hence all Interconnect_Ports 
+               in the switch are isolated.
+
+           'domainOtherSideEportIsolation(21)' - the peer E_port is 
+               isolated.
+
+           'domainInvalidRcfReceived(22)' - invalid RCF received.
+
+           'domainManagerDisabled(23) - domain manager is disabled.
+
+           'zoneMergeFailureIsolation(24)' - the two Interconnect_Ports 
+               cannot merge zoning configuration after having exchanged 
+               merging request for zoning.
+
+           'vsanMismatchIsolation(25)' - this VSAN is not configured 
+               on both sides of a trunk port.
+
+           'parentDown(26)' - the physical port to which this interface 
+               is bound is down.
+
+           'srcPortNotBound(27)'- no source port is specified for this 
+               interface.
+
+           'interfaceRemoved(28)' - interface is being removed.
+
+           'fcotNotPresent(29)' - FCOT (GBIC) not present.
+
+           'fcotVendorNotSupported(30)' - FCOT (GBIC) vendor is not 
+               supported. 
+
+           'incompatibleAdminMode(31)' - port administrative mode is 
+               incompatible with port capabilities. 
+
+           'incompatibleAdminSpeed(32)' - port speed is incompatible 
+               with port capabilities. 
+
+           'suspendedByMode(33)' - port that belongs to a port channel
+               is suspended due to incompatible operational mode.
+
+           'suspendedBySpeed(34)' - port that belongs to a port channel
+               is suspended due to incompatible operational speed.
+
+           'suspendedByWwn(35)' - port that belongs to a port channel 
+               is suspended due to incompatible remote switch WWN.
+
+           'domainMaxReTxFailure(36)' - domain manager failure after 
+               maximum retries.
+
+           'eppFailure(37)' - trunk negotiation protocol failure after 
+               maximum retries.
+
+           'portVsanMismatchIsolation(38)' - an attempt is made to 
+               connect two switches using non-trunking ports having 
+               different port VSANs. 
+
+           'loopbackIsolation(39)' - port is connected to another port 
+               in the same switch.
+
+           'upgradeInProgress(40)' - linecard upgrade in progress.
+
+           'incompatibleAdminRxBbCredit(41)' - receive BB credit is 
+               incompatible.
+
+           'incompatibleAdminRxBufferSize(42)' - receive buffer size 
+               is incompatible.
+
+           'portChannelMembersDown(43)' - no operational members.
+
+           'zoneRemoteNoRespIsolation(44)' - isolation due to remote 
+               zone server not responding.
+
+           'firstPortUpAsEport(45)' - in a over subscribed line card, 
+               when the first port in a group is up in E-mode, other 
+               ports in that group cannot be brought up.
+
+           'firstPortNotUp(46)' - in a over subscribed line card, 
+               first port cannot be brought up in E-mode when the 
+               other ports in the group are up.
+
+           'peerFcipPortClosedConnection(47)' - port went down because 
+               peer FCIP port closed TCP connection.    
+
+           'peerFcipPortResetConnection(48)' - port went down because 
+               the TCP connection was reset by the peer FCIP port.
+
+           'fcipPortMaxReTx(49)' - FCIP port went down due to maximum 
+               TCP re-transmissions reached the configured limit.
+
+           'fcipPortKeepAliveTimerExpire(50)' - FCIP port went down 
+               due to TCP keep alive timer expired.
+
+           'fcipPortPersistTimerExpire(51)' - FCIP port went down due 
+               to TCP persist timer expired.
+
+           'fcipPortSrcLinkDown(52)' - FCIP port went down due to 
+               Ethernet link down.
+
+           'fcipPortSrcAdminDown(53)' - FCIP port went down because 
+               the source Ethernet link was administratively shutdown.
+
+           'fcipPortAdminCfgChange(54)' - FCIP port went down due to 
+               configuration change. 
+
+           'fcipSrcPortRemoved(55)' - FCIP port went down due to source 
+               port removal.
+
+           'fcipSrcModuleNotOnline(56)' - FCIP port went down due to 
+               source module not online.
+
+           'invalidConfig(57)' - this port has a misconfiguration with 
+               respect to port channels.
+
+           'portBindFailure(58)' - port got isolated due to port bind 
+               failure.  
+
+           'portFabricBindFailure(59)' - port got isolated due to 
+               fabric bind failure.    
+
+           'noCommonVsanIsolation(60)' - trunk is isolated because 
+               there are no common VSANs with peer.
+
+           'ficonVsanDown (61)' - FICON VSAN down.
+
+           'invalidAttachment (62)' -  invalid attachment.
+
+           'portBlocked (63)' - port blocked due to FICON. 
+
+           'incomAdminRxBbCreditPerBuf (64)' - disabled due to 
+               incompatible administrative port rxbbcredit, 
+               performance buffers.
+
+           'tooManyInvalidFlogis (65)' - suspended due to too many 
+               invalid FLOGIs. 
+
+           'deniedDueToPortBinding (66)' - suspended due to port 
+               binding.
+
+           'elpFailureRevMismatch (67)' - isolated for ELP failure due 
+               to revision mismatch.
+
+           'elpFailureClassFParamErr (68)' - isolated for ELP failure 
+               due to Class F parameter error.
+
+           'elpFailureClassNParamErr (69)' - isolated for ELP failure 
+               due to Class N parameter error.
+
+           'elpFailureUnknownFlowCtlCode (70)' - isolated for ELP 
+               failure due to invalid flow control code.
+
+           'elpFailureInvalidFlowCtlParam (71)' - isolated for ELP 
+               failure due to invalid flow control parameter.
+
+           'elpFailureInvalidPortName(72)' - isolated for ELP failure 
+               due to invalid port name.
+
+           'elpFailureInvalidSwitchName (73)' - isolated for ELP 
+               failure due to invalid switch name.
+
+           'elpFailureRatovEdtovMismatch (74)' - isolated for ELP 
+               failure due to R_A_TOV or E_D_TOV mismatch.
+
+           'elpFailureLoopbackDetected (75)' - isolated for ELP 
+               failure due to loopback detected.
+
+           'elpFailureInvalidTxBbCredit (76)' - isolated for ELP 
+               failure due to invalid transmit BB credit.
+
+           'elpFailureInvalidPayloadSize (77)' - isolated for ELP 
+               failure due to invalid payload size.
+
+           'bundleMisCfg (78)' - misconfiguration in port channel 
+               membership detected.
+
+           'bitErrRuntimeThreshExceeded (79)' - bit error rate too 
+               high. It has exceeded the run time threshold.
+
+           'linkFailLinkReset (80)' - link failure due to link reset.
+
+           'linkFailPortInitFail (81)' - link failure due to port 
+               initialization failure.
+
+           'linkFailPortUnusable (82)' - link failure due to port 
+               unusable.
+
+           'linkFailLossOfSignal (83)' - link failure due to loss of 
+               signal. 
+
+           'linkFailLossOfSync (84)' - link failure due to loss of 
+               sync.
+
+           'linkFailNosRcvd (85)' - link failure due to non-operational 
+               sequences received.
+
+           'linkFailOLSRcvd (86)' - link failure due to offline 
+               sequences received.
+
+           'linkFailDebounceTimeout (87)' - link failure due to 
+               re-negotiation failed.
+
+           'linkFailLrRcvd (88)' - link failure when link reset(LR) 
+               operation fails due to non-empty receive queue.  
+
+           'linkFailCreditLoss (89)' - link failure due to excessive 
+               credit loss indications.
+
+           'linkFailRxQOverflow (90)' - link failure due to receive 
+               queue overflow.
+
+           'linkFailTooManyInterrupts (91)' - link failure due to 
+               excessive port interrupts.
+
+           'linkFailLipRcvdBb (92)' - link failure when loop 
+               initialization(LIP) operation fails due to non empty 
+               receive queue.
+
+           'linkFailBbCreditLoss (93)' - link failure when link 
+               reset(LR) operation fails due to queue not empty.
+
+           'linkFailOpenPrimSignalTimeout (94)' - link failure due to
+               open primitive signal timeout while receive queue
+               not empty.
+
+           'linkFailOpenPrimSignalReturned (95)' - link failure due to
+               open primitive signal returned while receive queue 
+               not empty. 
+
+           'linkFailLipF8Rcvd (96)' - link failure due to F8 LIP 
+               received.
+
+           'linkFailLineCardPortShutdown (97)' - link failure due to 
+               port shutdown.
+
+           'fcspAuthenFailure (98)' - fibre channel security protocol 
+               authorization fail.
+
+           'fcotChecksumError (99)' - FCOT SPROM checksum error. 
+
+           'ohmsExtLoopbackTest (100)' - link suspended due to external 
+               loopback diagnostics failure.
+
+           'invalidFabricBindExchange (101)' - invalid fabric binding 
+               exchange.
+
+           'tovMismatch (102)' - link isolation due to TOV mismatch.
+
+           'ficonNotEnabled (103)' - FICON not enabled.
+
+           'ficonNoPortNumber (104)' - no FICON port number.
+
+           'ficonBeingEnabled (105)' - FICON is being enabled.
+
+           'ePortProhibited (106)' - port down because FICON prohibit 
+               mask in place for E/TE port.
+
+           'portGracefulShutdown (107)' - port has been shutdown 
+               gracefully.
+
+           'trunkNotFullyActive (108)' - some of the VSANs which are 
+               common with the peer are not up.
+
+           'fabricBindingSwitchWwnNotFound (109)' - peer switch WWN not 
+               found in fabric binding active database.
+
+           'fabricBindingDomainInvalid (110)' - peer domain ID is 
+               invalid in fabric binding active database.
+
+           'fabricBindingDbMismatch (111)' - fabric binding active 
+               database mismatch with peer. 
+
+           'fabricBindingNoRspFromPeer (112)' - fabric binding no 
+               response from peer.
+
+           'dpvmVsanSuspended (113)' - dpvm vsan is suspended.
+
+           'dpvmVsanNotFound (114)' - dpvm vsan not found.
+
+           'trackedPortDown (115)' - port down because tracked
+               port is down.
+
+           'ecSuspendedOnLoop (116)' - port suspended because extended
+               BB credits are configured on loop port.
+
+           'isolateBundleMisCfg (117)' - port isolated due to bundle
+               mis-configuration.
+
+           'noPeerBundleSupport (118)' - peer port does not support
+               bundle.
+
+           'portBringupIsolation (119)' - trunk port isolated during 
+               bringup time.
+
+           'domainNotAllowedIsolated (120)' - port isolated due to
+               domain not allowed.
+
+           'virtualIvrDomainOverlapIsolation (121)' - port isolated
+                      due to virtual IVR domain overlap.
+
+           'outOfService (122)' - port is in out of service state.
+
+           'portAuthFailed (123)' - port has encountered an 802.1x 
+            authentication failure.
+
+           'bundleStandby (124)' - port cannot be brought up in 
+                   a bundle, since the bundle has max members.
+
+           'portConnectorTypeErr (125)' - Error in the port connector 
+            type (SFP).
+
+           'errorDisabledReInitLmtReached (126)' - the port is not 
+            operational after trying to initialize the port multiple 
+            times due to some erorrs.
+
+           'ficonDupPortNum (127)' - the ficon vsan has a duplicate 
+            port number.
+
+           'localRcf (128)' - fcdomain applied a locally disruptive
+            reconfiguration (the local domain became invalid; no 
+            RCF frames have been sent outside the local switch).
+
+            'twoSwitchesWithSameWWN (129)' - merge attempt between
+            VSANs containing the same WWN. If the user attempts to 
+            merge two different VSANs and both have at least one 
+            switch with the same WWN then the link in between the 
+            VSANs is isolated.
+
+            'invalidOtherSidePrincEFPReqRecd (130)' - EFP request frame
+            indicating a principal switch other than the locally 
+            known one.
+
+            'domainOther (131)' - other domain manager reasons not 
+            defined here.
+
+            'elpFailureAllZeroPeerWWNRcvd (132)' - isolated for ELP 
+            failure due to peer WWN is received with all zeros.
+
+            'preferredPathIsolation (133)' - port isolated due to
+             preferred path not able to program the routes.
+
+            'fcRedirectIsolation (134)' - port isolated due to
+                    FC Redirect not being able to program routes.
+
+             'portActLicenseNotAvailable (135)' - port not brought up
+                due to lack of port activation licenses.
+
+             'sdmIsolation (136)' - port isolated due to SDM 
+                (Security Device Manager) not being
+                able to program routes.
+
+             'fcidAllocationFailed (137)' - port down due to failure
+                in FCID (Fibre Channel Domain ID) allocation.   
+
+             'externallyDisabled (138)' - port externally disabled.
+
+             'unavailableNPVUpstreamPort (139)' - NPV 
+                     (NPort Virtualizer) upstream port not available.
+
+             'unavailableNPVPrefUpstreamPort (140)' - NPV 
+                (NPort Virtualizer) preferred 
+                upstream port not available.
+
+             'sfpReadError (141)' - the port is not operational due to 
+                     SFP (Small Formfactor Pluggable) read error.
+
+             'stickyDownOnLinkFailure (142)' - the port is 
+                     not operational due to link failure 
+                     in the sticky down mode.
+
+             'tooManyLinkFlapsErr (143)' - too many link flaps 
+                     on the port in a short interval.
+
+             'unidirectionalUDLD (144)' - unidirectional UDLD 
+                (Uni Directional Link Detection) detected.
+
+             'txRxLoopUDLD (145)' - UDLD (Uni Directional 
+                     Link Detection) Tx Rx loop.
+
+             'neighborMismatchUDLD (146)' - UDLD 
+                (Uni Directional Link Detection) neighbor mismatch.
+
+             'authzPending (147)' - authorization pending.
+
+             'hotStdbyInBundle (148)' - hot standby in bundle.
+
+             'incompleteConfig (149)' - all parameters on the port 
+                              have not been configured.
+
+             'incompleteTunnelCfg (150)' - incomplete tunnel config.
+
+             'hwProgrammingFailed (151)' - hardware programming failed.
+
+             'tunnelDstUnreachable (152)' - no route to 
+                     tunnel destination address.
+
+             'suspendByMtu (153)' - MTU allocation failed.
+
+             'sfpInvalid (154)' - SFP (Small Formfactor Pluggable) 
+                is not Cisco certified.
+
+             'sfpAbsent (155)' - SFP (Small Formfactor 
+                     Pluggable) is absent.
+
+            'portCapabilitiesUnknown (156)' - the capabilities of the 
+                    port are unknown.
+
+             'channelErrDisabled (157)' - the port-channel to which 
+                     the port belongs is in error disabled state.
+
+             'vrfMismatch (158)' - Mismatch in source and transport VRF
+                        (VPN Routing and Forwarding).
+
+             'vrfForwardReferencing (159)' - Forward referencing 
+                     transport VRF (VPN Routing and Forwarding).
+
+             'dupTunnelConfigDetected (160)' - two tunnel interfaces 
+                     with same configuration is not allowed.
+
+             'primaryVLANDown (161)' - primary VLAN is in down state.
+
+             'vrfUnusable (162)' - VRF (VPN Routing and Forwarding) 
+                    is unusable.
+
+             'errDisableHandShkFailure (163)' - port is not operational 
+                             due to an internal handshake failure.
+
+             'errDisabledBPDUGuard (164)' - BPDUGuard 
+             (Bridge Protocol Data Unit) triggered 
+             error disable on the port.
+
+             'dot1xSecViolationErrDisabled (165)' - error disabled 
+                   due to dot1x security violation.
+
+             'emptyEchoUDLD (166)' - UDLD (Uni Directional 
+                     Link Detection) empty echo.
+
+             'vfTaggingCapErr (167)' - VF Tagging capability 
+                     mismatch error.
+
+             'portDisabled (168)' - Port disabled.
+
+             'tunnelModeNotConfigured (169)' - Tunnel Mode is not 
+                             configured.
+
+             'tunnelSrcNotConfigured (170)' - Tunnel Source is not 
+                             configured. 
+
+             'tunnelDstNotConfigured (171)' - Tunnel Destination 
+                             is not configured.
+
+             'tunnelUnableToResolveSrcIP (172)' - Unable to resolve 
+                             tunnel source IP address. 
+
+             'tunnelUnableToResolveDstIP (173)' - Unable to resolve 
+                             tunnel destination IP address.
+
+             'tunnelVrfDown (174)' - Tunnel VRF down.
+
+             'sifAdminDown (175)' - SIF (Service Information Field) 
+                is admin down.
+
+             'phyIntfDown (176)' - Physical interface is down.
+
+             'ifSifLimitExceeded (177)' - Interface SIF 
+             (Service Information Field)limit is exceeded.
+
+             'sifHoldDown (178)' - SIF (Service Information Field) 
+                     hold down.
+
+             'noFcoe (179)' - No FCOE (Fibre Channel Over Ethernet) 
+                configuration.
+
+             'dcxCompatMismatch (180)' - DCX Compatibility Mismatch.
+
+             'isolateBundleLimitExceeded (181)' - Isolation due to 
+                         bundle limit exceeded.
+
+             'sifNotBound (182)' - SIF (ervice Information Field) 
+                     is not bound.
+
+             'errDisabledLacpMiscfg (183)' - Error Disabled due to 
+                     LACP (Link Access Control Protocol) misconfig.
+
+             'satFabricIfDown (184)' - Satellite fabric interface down.
+
+             'invalidSatFabricIf (185)' - Invalid satellite fabric 
+                             interface.
+
+             'noRemoteChassis (186)' - No remote chassis.
+
+             'vicEnableNotReceived (187)' - VIC enable not received.
+
+             'vicDisableReceived (188)' - VIC disable received.
+
+             'vlanVsanMappingNotEnabled (189)' - VLAN VSAN mapping not 
+                             enabled.
+
+             'stpNotFwdingInFcoeMappedVlan (190)' - STP not forwarding 
+                             in FCOE Mapped Vlan.
+
+             'moduleOffline (191)' - Module Offline.
+
+             'udldAggModeLinkFailure (192)' - UDLD (Uni Directional Link
+                Detection) aggresive mode link failure.
+
+             'stpInconsVpcPeerDisabled (193)' - STP inconsistent 
+                     VPC (Virtual Port Channel) peer disabled. 
+
+             'setPortStateFailed (194)' - Set port state failed.
+
+             'suspendedByVpc (195)' - Suspended by VPC 
+                     (Virtual Port Channel).
+
+             'vpcCfgInProgress (196)' - VPC (Virtual Port Channel)
+                 configuration in progress.
+
+             'vpcPeerLinkDown (197)' - VPC (Virtual Port Channel)
+                 peer link down.
+
+             'vpcNoRspFromPeer (198)' - VPC (Virtual Port Channel) 
+                no response from peer.
+
+             'protoPortSuspend (199)' - Proto port suspend.
+
+             'tunnelSrcDown (200)' - Tunnel source down.
+
+             'cdpInfoUnavailable (201)' - CDP 
+             (Cisco Discovery Protocol) information unavailable.
+
+             'fexSfpInvalid (202)' - FEX (Fabric Extender) 
+             SFP (Small Formfactor Pluggable) invalid.
+
+             'errDisabledIpConflict (203)' - Error Disabled due to IP
+                              conflict.
+
+             'fcotClkRateMismatch (204)' - FCOT CLK rate mismatch.
+
+             'portGuardTrustSecViolation (205)' - Error disabled due 
+                 to port guard (Cisco Trusted Security Violation).
+
+             'sdpTimeout (206)' - SDP (Secure Device Provisioning)
+                      timeout.
+
+             'satIncompatTopo (207)' - Satellite incompatible topology.
+
+             'waitForFlogi (208)' - Wait for FLOGI.
+
+             'satNotConfigured (209)' - Satellite not configured.
+
+             'npivNotEnabledInUpstream (210)' - NPIV (N Port Identifier
+                Virtualization) not enabled in upstream.
+
+             'vsanMismatchWithUpstreamSwPort (211)' - VSAN 
+                     mismatch with upstream switch port.
+
+             'portGuardBitErrRate (212)' - Error disabled due to port 
+                             guard (Bit Error Rate).
+
+             'portGuardSigLoss (213)' - Error disabled due to 
+                     port guard (Signal Loss).
+
+             'portGuardSyncLoss (214)' - Error disabled due to port 
+                             guard (Sync Loss).
+
+             'portGuardLinkReset (215)' - Error disabled due to port
+                             guard (Link Reset).
+
+             'portGuardCreditLoss (216)' - Error disabled due to port
+                             guard (Credit Loss).
+
+             'ipQosMgrPolicyAppFailure (217)' - IP QOS Manager policy 
+                          application failure.
+
+             'pauseRateLimitErrDisabled (218)' - Port error disabled due
+                                        to pause rate limit condition.
+
+             'lstGrpUplinkDown (219)' - EthPM LSTGRP downstream link 
+                             down due to upstream link down.
+
+             'stickyDnLinkFailure (220)' - Port kept in error disabled
+                                         state due to Link Failure.
+
+             'routerMacFailure (221)' - Router MAC failure.
+
+             'dcxMultipleMsapIds (222)' - Port error disabled due to
+                                        multiple MSAP IDs (DCX).
+
+             'dcxHundredPdusRcvdNoAck (223)' - Hundred PDUs received 
+                             without ACK (DCX).
+
+             'enmSatIncompatibleUplink (224)' - Satellite Incompatible 
+                             Uplink.
+
+             'enmLoopDetected (225)' - Loop Detected (ENM).
+
+             'nonStickyExternallyDisabled (226)' - Disabled by VPD 
+                             Manager with shut/no shut allowed.
+
+             'nonStickyExternallyDisabled (227)' - Sub-group ID 
+                             not assigned.
+
+             'vemUnlicensed (228)' - VEM Unlicensed.
+
+             'profileNotFound (229)' - Profile not found.
+
+             'nonExistentVlan (230)' - VLAN does not exist.
+
+             'vlanInvalidType (231)' - Invalid VLAN type.
+
+             'vlanDown (232)' - VLAN down.
+
+             'vpcPeerUpgrade (233)' - VPC Peer Upgrade.
+
+             'ipQosDcbxpCompatFailure (234)' - IPQOS DCBXP compatibility
+                           failure.
+
+             'nonCiscoHbaVfTag (235)' - Error Disabled due to Non-Cisco 
+                             HBA VF Tag.
+
+             'domainIdConfigMismatch (236)' - Domain ID config mismatch.
+
+             'sfpSpeedMismatch (237)' - SFP (Small Formfactor Pluggable)
+                 speed mismatch.
+             'xcvrInitializing (238)' - Transceiver initializing.
+
+             'xcvrAbsent (239)' - Transceiver absent.
+
+             'xcvrInvalid (240)' - Transceiver invalid.
+
+             'vfcBindingInvalid (241)' - Invalid VFC Binding.
+
+             'vlanNotFcoeEnabled (242)' - VLAN down due to FCOE 
+                             disabled.
+
+             'pvlanNativeVlanErr (243)' - Private VLAN 
+                             Native VLAN error.
+
+             'ethL2VlanDown (244)' - Ethernet L2 VLAN down.
+
+             'ethIntfInvalidBinding (245)' - Invalid Binding 
+                     to Ethernet Interface.
+
+             'pmonFailure (246)' - PMON Failure.
+
+             'l3NotReady (247)' - L3 not ready.
+
+             'speedMismatch (248)' - Speed Mismatch.
+
+             'flowControlMismatch (249)' - Flow Control Mismatch.
+
+             'vdcMode (250)' - VDC mode 
+
+             'suspendedDueToMinLinks (251)' - Suspended due 
+                             to Min Links.
+
+             'enmPinFailLinkDown (252)' - ENM Pin Fail Link Down.
+
+             'inactiveM1PortFpathActiveVlan (253)' - Inactive M1 Port
+                                    F Path Active VLAN.
+
+             'parentPortDown (254)' - Parent Port Down.
+
+             'moduleRemoved (255)' - Module Removed.
+
+             'corePortMct (256)' - Core Port MCT.
+
+             'nonCorePortMct (257)' - Non Core port MCT.
+
+             'ficonInorderNotActive (258)'- FICON Inorder Not Active.
+
+             'invalidEncapsulation (259)' - Invalid Encapsulation.
+
+             'modemLineDeasserted (260)' - Modem line Deasserted.
+
+             'ipSecHndshkInProgress (261)' - IP Sec Handshake in 
+                                     progress.
+
+             'sfpEthCompliantErr (262)' - Sfp Ethernet compliant error.
+
+             'cellularModemUnattached (263)' - Cellular Modem 
+                             unattached.
+
+             'outOfGlblRxBuffers (264)' - Out of Global Rx Buffers.
+
+             'sfpFcCompliantErr (265)' - Sfp Fc compliant Error.
+
+             'ethIntfNotLicensed (266)' - Ethernet Interface Not 
+                                             Licensed.
+
+             'domainIdsInvalid (267)' - Domain IDs Invalid.
+
+             'fabricNameInvalid (268)' - Fabric Name Invalid."
+    SYNTAX          INTEGER  {
+                        other(1),
+                        none(2),
+                        hwFailure(3),
+                        loopbackDiagFailure(4),
+                        errorDisabled(5),
+                        swFailure(6),
+                        linkFailure(7),
+                        offline(8),
+                        nonParticipating(9),
+                        initializing(10),
+                        vsanInactive(11),
+                        adminDown(12),
+                        channelAdminDown(13),
+                        channelOperSuspended(14),
+                        channelConfigurationInProgress(15),
+                        rcfInProgress(16),
+                        elpFailureIsolation(17),
+                        escFailureIsolation(18),
+                        domainOverlapIsolation(19),
+                        domainAddrAssignFailureIsolation(20),
+                        domainOtherSideEportIsolation(21),
+                        domainInvalidRcfReceived(22),
+                        domainManagerDisabled(23),
+                        zoneMergeFailureIsolation(24),
+                        vsanMismatchIsolation(25),
+                        parentDown(26),
+                        srcPortNotBound(27),
+                        interfaceRemoved(28),
+                        fcotNotPresent(29),
+                        fcotVendorNotSupported(30),
+                        incompatibleAdminMode(31),
+                        incompatibleAdminSpeed(32),
+                        suspendedByMode(33),
+                        suspendedBySpeed(34),
+                        suspendedByWWN(35),
+                        domainMaxReTxFailure(36),
+                        eppFailure(37),
+                        portVsanMismatchIsolation(38),
+                        loopbackIsolation(39),
+                        upgradeInProgress(40),
+                        incompatibleAdminRxBbCredit(41),
+                        incompatibleAdminRxBufferSize(42),
+                        portChannelMembersDown(43),
+                        zoneRemoteNoRespIsolation(44),
+                        firstPortUpAsEport(45),
+                        firstPortNotUp(46),
+                        peerFCIPPortClosedConnection(47),
+                        peerFCIPPortResetConnection(48),
+                        fcipPortMaxReTx(49),
+                        fcipPortKeepAliveTimerExpire(50),
+                        fcipPortPersistTimerExpire(51),
+                        fcipPortSrcLinkDown(52),
+                        fcipPortSrcAdminDown(53),
+                        fcipPortAdminCfgChange(54),
+                        fcipSrcPortRemoved(55),
+                        fcipSrcModuleNotOnline(56),
+                        invalidConfig(57),
+                        portBindFailure(58),
+                        portFabricBindFailure(59),
+                        noCommonVsanIsolation(60),
+                        ficonVsanDown(61),
+                        invalidAttachment(62),
+                        portBlocked(63),
+                        incomAdminRxBbCreditPerBuf(64),
+                        tooManyInvalidFlogis(65),
+                        deniedDueToPortBinding(66),
+                        elpFailureRevMismatch(67),
+                        elpFailureClassFParamErr(68),
+                        elpFailureClassNParamErr(69),
+                        elpFailureUnknownFlowCtlCode(70),
+                        elpFailureInvalidFlowCtlParam(71),
+                        elpFailureInvalidPortName(72),
+                        elpFailureInvalidSwitchName(73),
+                        elpFailureRatovEdtovMismatch(74),
+                        elpFailureLoopbackDetected(75),
+                        elpFailureInvalidTxBbCredit(76),
+                        elpFailureInvalidPayloadSize(77),
+                        bundleMisCfg(78),
+                        bitErrRuntimeThreshExceeded(79),
+                        linkFailLinkReset(80),
+                        linkFailPortInitFail(81),
+                        linkFailPortUnusable(82),
+                        linkFailLossOfSignal(83),
+                        linkFailLossOfSync(84),
+                        linkFailNosRcvd(85),
+                        linkFailOLSRcvd(86),
+                        linkFailDebounceTimeout(87),
+                        linkFailLrRcvd(88),
+                        linkFailCreditLoss(89),
+                        linkFailRxQOverflow(90),
+                        linkFailTooManyInterrupts(91),
+                        linkFailLipRcvdBb(92),
+                        linkFailBbCreditLoss(93),
+                        linkFailOpenPrimSignalTimeout(94),
+                        linkFailOpenPrimSignalReturned(95),
+                        linkFailLipF8Rcvd(96),
+                        linkFailLineCardPortShutdown(97),
+                        fcspAuthenfailure(98),
+                        fcotChecksumError(99),
+                        ohmsExtLoopbackTest(100),
+                        invalidFabricBindExchange(101),
+                        tovMismatch(102),
+                        ficonNotEnabled(103),
+                        ficonNoPortNumber(104),
+                        ficonBeingEnabled(105),
+                        ePortProhibited(106),
+                        portGracefulShutdown(107),
+                        trunkNotFullyActive(108),
+                        fabricBindingSwitchWwnNotFound(109),
+                        fabricBindingDomainInvalid(110),
+                        fabricBindingDbMismatch(111),
+                        fabricBindingNoRspFromPeer(112),
+                        dpvmVsanSuspended(113),
+                        dpvmVsanNotFound(114),
+                        trackedPortDown(115),
+                        ecSuspendedOnLoop(116),
+                        isolateBundleMisCfg(117),
+                        noPeerBundleSupport(118),
+                        portBringupIsolation(119),
+                        domainNotAllowedIsolated(120),
+                        virtualIvrDomainOverlapIsolation(121),
+                        outOfService(122),
+                        portAuthFailed(123),
+                        bundleStandby(124),
+                        portConnectorTypeErr(125),
+                        errorDisabledReInitLmtReached(126),
+                        ficonDupPortNum(127),
+                        localRcf(128),
+                        twoSwitchesWithSameWWN(129),
+                        invalidOtherSidePrincEFPReqRecd(130),
+                        domainOther(131),
+                        elpFailureAllZeroPeerWWNRcvd(132),
+                        preferredPathIsolation(133),
+                        fcRedirectIsolation(134),
+                        portActLicenseNotAvailable(135),
+                        sdmIsolation(136),
+                        fcidAllocationFailed(137),
+                        externallyDisabled(138),
+                        unavailableNPVUpstreamPort(139),
+                        unavailableNPVPrefUpstreamPort(140),
+                        sfpReadError(141),
+                        stickyDownOnLinkFailure(142),
+                        tooManyLinkFlapsErr(143),
+                        unidirectionalUDLD(144),
+                        txRxLoopUDLD(145),
+                        neighborMismatchUDLD(146),
+                        authzPending(147),
+                        hotStdbyInBundle(148),
+                        incompleteConfig(149),
+                        incompleteTunnelCfg(150),
+                        hwProgrammingFailed(151),
+                        tunnelDstUnreachable(152),
+                        suspendByMtu(153),
+                        sfpInvalid(154),
+                        sfpAbsent(155),
+                        portCapabilitiesUnknown(156),
+                        channelErrDisabled(157),
+                        vrfMismatch(158),
+                        vrfForwardReferencing(159),
+                        dupTunnelConfigDetected(160),
+                        primaryVLANDown(161),
+                        vrfUnusable(162),
+                        errDisableHandShkFailure(163),
+                        errDisabledBPDUGuard(164),
+                        dot1xSecViolationErrDisabled(165),
+                        emptyEchoUDLD(166),
+                        vfTaggingCapErr(167),
+                        portDisabled(168),
+                        tunnelModeNotConfigured(169),
+                        tunnelSrcNotConfigured(170),
+                        tunnelDstNotConfigured(171),
+                        tunnelUnableToResolveSrcIP(172),
+                        tunnelUnableToResolveDstIP(173),
+                        tunnelVrfDown(174),
+                        sifAdminDown(175),
+                        phyIntfDown(176),
+                        ifSifLimitExceeded(177),
+                        sifHoldDown(178),
+                        noFcoe(179),
+                        dcxCompatMismatch(180),
+                        isolateBundleLimitExceeded(181),
+                        sifNotBound(182),
+                        errDisabledLacpMiscfg(183),
+                        satFabricIfDown(184),
+                        invalidSatFabricIf(185),
+                        noRemoteChassis(186),
+                        vicEnableNotReceived(187),
+                        vicDisableReceived(188),
+                        vlanVsanMappingNotEnabled(189),
+                        stpNotFwdingInFcoeMappedVlan(190),
+                        moduleOffline(191),
+                        udldAggModeLinkFailure(192),
+                        stpInconsVpcPeerDisabled(193),
+                        setPortStateFailed(194),
+                        suspendedByVpc(195),
+                        vpcCfgInProgress(196),
+                        vpcPeerLinkDown(197),
+                        vpcNoRspFromPeer(198),
+                        protoPortSuspend(199),
+                        tunnelSrcDown(200),
+                        cdpInfoUnavailable(201),
+                        fexSfpInvalid(202),
+                        errDisabledIpConflict(203),
+                        fcotClkRateMismatch(204),
+                        portGuardTrustSecViolation(205),
+                        sdpTimeout(206),
+                        satIncompatTopo(207),
+                        waitForFlogi(208),
+                        satNotConfigured(209),
+                        npivNotEnabledInUpstream(210),
+                        vsanMismatchWithUpstreamSwPort(211),
+                        portGuardBitErrRate(212),
+                        portGuardSigLoss(213),
+                        portGuardSyncLoss(214),
+                        portGuardLinkReset(215),
+                        portGuardCreditLoss(216),
+                        ipQosMgrPolicyAppFailure(217),
+                        pauseRateLimitErrDisabled(218),
+                        lstGrpUplinkDown(219),
+                        stickyDnLinkFailure(220),
+                        routerMacFailure(221),
+                        dcxMultipleMsapIds(222),
+                        dcxHundredPdusRcvdNoAck(223),
+                        enmSatIncompatibleUplink(224),
+                        enmLoopDetected(225),
+                        nonStickyExternallyDisabled(226),
+                        subGroupIdNotAssigned(227),
+                        vemUnlicensed(228),
+                        profileNotFound(229),
+                        nonExistentVlan(230),
+                        vlanInvalidType(231),
+                        vlanDown(232),
+                        vpcPeerUpgrade(233),
+                        ipQosDcbxpCompatFailure(234),
+                        nonCiscoHbaVfTag(235),
+                        domainIdConfigMismatch(236),
+                        sfpSpeedMismatch(237),
+                        xcvrInitializing(238),
+                        xcvrAbsent(239),
+                        xcvrInvalid(240),
+                        vfcBindingInvalid(241),
+                        vlanNotFcoeEnabled(242),
+                        pvlanNativeVlanErr(243),
+                        ethL2VlanDown(244),
+                        ethIntfInvalidBinding(245),
+                        pmonFailure(246),
+                        l3NotReady(247),
+                        speedMismatch(248),
+                        flowControlMismatch(249),
+                        vdcMode(250),
+                        suspendedDueToMinLinks(251),
+                        enmPinFailLinkDown(252),
+                        inactiveM1PortFpathActiveVlan(253),
+                        parentPortDown(254),
+                        moduleRemoved(255),
+                        corePortMct(256),
+                        nonCorePortMct(257),
+                        ficonInorderNotActive(258),
+                        invalidEncapsulation(259),
+                        modemLineDeasserted(260),
+                        ipSecHndshkInProgress(261),
+                        sfpEthCompliantErr(262),
+                        cellularModemUnattached(263),
+                        outOfGlblRxBuffers(264),
+                        sfpFcCompliantErr(265),
+                        ethIntfNotLicensed(266),
+                        domainIdsInvalid(267),
+                        fabricNameInvalid(268)
+                    }
+
+EntLogicalIndexOrZero ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention is an extension of entLogicalIndex.
+        If non-zero, the semantic is same as entLogicalIndex object.
+        If zero, no appropriate entLogicalIndex exists.  Any additional 
+        semantics must be defined as part of the description of any 
+        object which uses this syntax."
+    SYNTAX          Integer32 (0..2147483647)
+
+CiscoURLString ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention defines the URL string.
+        The  Universal Resource Locator(URL). The URL strings
+        are compact string representation for a resource
+        available via internet. This is the address location 
+        of the page to load. The string should represent a
+        fully qualifying string with the format 
+        'protocol:/server/page'. In general the string should 
+        point to any value that can be saved/loaded.
+        Any limitation for the URL must be defined as part of
+        the description of any object which uses this syntax."
+
+    REFERENCE       "Uniform Resource Locators. RFC 1738."
+    SYNTAX          OCTET STRING (SIZE (1..255))
+
+CiscoURLStringOrEmpty ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention is an extension of CiscoURLString.
+        This extension permits the additional value of empty (zero
+        length) string.  The description of any object which uses this
+        syntax must specifically describe the meaning of empty string
+        value."
+
+    REFERENCE       "Uniform Resource Locators. RFC 1738."
+    SYNTAX          OCTET STRING (SIZE (0..255))
+
+CiscoHTTPResponseStatusCode ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This corresponds to the HTTP Status code.
+        The Status-Code element in HTTP response is 
+        a 3-digit integer result code of the attempt
+        to understand and satisfy the HTTP request
+        The Status-Code is intended for use by automata.
+
+        The first digit of the Status-Code defines the class of 
+        response.  The last two digits do not have any 
+        categorization role. There are 5 values for the first digit:
+
+         - 1xx: Informational - Request received, continuing process
+
+         - 2xx: Success - The action was successfully received,
+                understood, and accepted
+
+         - 3xx: Redirection - Further action must be taken in order 
+                to complete the request
+
+         - 4xx: Client Error - The request contains bad syntax 
+                or cannot be fulfilled
+
+         - 5xx: Server Error - The server failed to fulfill an 
+                apparently valid request."
+
+    REFERENCE
+        "RFC 2616 Section 6.1.1 Status Code and Reason Phrase."
+    SYNTAX          Unsigned32 (100..599)
+
+CvE164Address ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "A UTF-8 string limited to the character set defined for
+        E.164, '0123456789*#,'.
+        Note that  represents the double quote which
+        cannot be contained in a SMI description clause.
+             OR
+        An IA5String limited to the character set '0123456789*#,.'"
+
+    REFERENCE
+        "ITU-T E.164, Q.931 chapter 4.5.10
+         ITU-H H.225.0 Annex H"
+    SYNTAX          OCTET STRING (SIZE (1..128))
+
+CiscoVlanList ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Each octet within this value specifies a set of eight
+        VLANs. The object defined by this textual convention
+        can specify a VLAN range of 1k VLANs in its description.
+        Example: 0 - 1023, 1024 - 2047, etc. The first octet
+        represents the first 8 VLANs of the range of VLANs
+        specified by the object, the second octet represents
+        the next 8 VLANs, etc. When a VLAN range is not
+        specified, a default VLAN range of '0 - 1023' is assumed.
+
+        Within each octet, the most significant bit represents
+        the lowest numbered VLAN, and the least significant bit
+        represents the highest numbered VLAN. Thus, each VLAN
+        of the device is represented by a single bit within the
+        value of this object.  If that bit has a value of '1'
+        then that VLAN is included in the set of VLANs; the VLAN
+        is not included if its bit has a value of '0'.
+
+        Note that if the length of this string is less than
+        128 octets, any 'missing' octets are assumed to contain
+        the value zero. An NMS may omit any zero-valued octets
+        from the end of this string in order to reduce SetPDU size,
+        and the agent may also omit zero-valued trailing octets,
+        to reduce the size of GetResponse PDUs."
+    SYNTAX          OCTET STRING (SIZE (0..128))
+
+CiscoCosList ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Each bit represents a CoS value (0 through 7)."
+    SYNTAX          BITS {
+                        cos0(0),
+                        cos1(1),
+                        cos2(2),
+                        cos3(3),
+                        cos4(4),
+                        cos5(5),
+                        cos6(6),
+                        cos7(7)
+                    }
+
+CiscoPbbServiceIdentifier ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An integer-value which identifies the service instance of
+        the Provider Backbone Bridge frame."
+
+    REFERENCE       "IEEE P802.1ah/D3.3 chapter 9.8, December 2006"
+    SYNTAX          Unsigned32 (1..16777216)
+
+CiscoBridgeDomain ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An object with this syntax contains a bridge domain number
+        which is used to distinguish between multiple bridge domains. A
+        bridge domain represents a set of (logical) Ethernet segments
+        which are interconnected by 802.1D bridges. 802.1Q allows for a
+        maximum of 4095 VLANs within a bridge domain. Some devices can
+        be connected to multiple bridge domains, e.g., routers with
+        some of their interfaces in one bridge domain and other
+        interfaces in other bridge domain. In such devices, the
+        combination of bridge-domain-number and VLAN-id can be used to
+        uniquely identify any VLAN across all interfaces."
+    SYNTAX          Unsigned32 (1..65535)
+
+Cisco2KVlanList ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Each octet within this value specifies a set of eight VLANs.
+        The object defined by this textual convention can specify a VLAN
+        range of 2k VLANs in its description. Example: 0 - 2047, 2048 -
+        4095, etc. The first octet represents the first 8 VLANs of the
+        range of VLANs specified by the object, the second octet
+        represents the next 8 VLANs, etc.
+
+        Within each octet, the most significant bit represents the
+        lowest numbered VLAN, and the least significant bit represents
+        the highest numbered VLAN. Thus, each VLAN of the device is
+        represented by a single bit within the value of this object. If
+        that bit has a value of '1' then that VLAN is included in the
+        set of VLANs; the VLAN is not included if its bit has a value of
+        '0'.
+
+        Note that if the length of this string is less than 256 octets,
+        any 'missing' octets are assumed to contain the value zero. An
+        NMS may omit any zero-valued octets from the end of this string
+        in order to reduce SetPDU size, and the agent may also omit
+        zero-valued trailing octets, to reduce the size of GetResponse
+        PDUs."
+    SYNTAX          OCTET STRING (SIZE (0..256))
+
+CiscoInterfaceIndexList ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "This textual convention contains a list of ifIndex values.
+
+        Each ifIndex value is represented by four octets.
+        Every set of four octets represents a value of an instance
+        of ifIndex object, defined in IF-MIB, corresponding to a
+        particular interface.
+
+        For example, the first octet to the fourth octet represent a 
+        value of the instance of ifIndex object for the first 
+        interface in the list.  The fifth octet to the eighth octet 
+        represent a value of the instance of ifIndex object for
+        the second interface in the list.
+
+        Up to 64 interfaces can be represented by this textual 
+        convention."
+    SYNTAX          OCTET STRING (SIZE (0..256))
+
+CiscoVrfName ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The name of the Virtual Private Network Routing and
+        Forwarding (VRF) domain.
+
+        Semantics of a zero length CiscoVrfName are object-specific
+        and must be defined as part of the description of any object
+        which uses this syntax."
+    SYNTAX          OCTET STRING (SIZE (0..32))
+
+END
+
+
diff --git a/snmp_builder/mibs/CISCO-VTP-MIB.mib b/snmp_builder/mibs/CISCO-VTP-MIB.mib
new file mode 100644
index 0000000..8d8c3cf
--- /dev/null
+++ b/snmp_builder/mibs/CISCO-VTP-MIB.mib
@@ -0,0 +1,5874 @@
+-- *****************************************************************
+-- Cisco VTP MIB
+--   
+-- February, 1997 Chris Young
+-- April, 2003  Wen Xu
+-- July, 2003  Wen Xu
+-- August, 2003  Wen Xu
+-- November, 2003  Wen Xu
+-- February, 2004  Wen Xu
+--   
+-- Copyright (c) 1996-2002, 2003, 2004, 2006-2008, 2009-2010 by Cisco
+-- Systems, Inc.
+-- All rights reserved.
+-- *****************************************************************
+--   
+
+CISCO-VTP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    Counter32,
+    IpAddress,
+    Gauge32,
+    Integer32,
+    Unsigned32
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    TEXTUAL-CONVENTION,
+    RowStatus,
+    DisplayString,
+    DateAndTime,
+    TruthValue,
+    TestAndIncr,
+    TimeStamp
+        FROM SNMPv2-TC
+    InterfaceIndex,
+    ifIndex,
+    InterfaceIndexOrZero
+        FROM IF-MIB
+    OwnerString
+        FROM RMON-MIB
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    Cisco2KVlanList
+        FROM CISCO-TC
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoVtpMIB MODULE-IDENTITY
+    LAST-UPDATED    "201005120000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-wbu@cisco.com, 
+                    cs-lan-switch-snmp@cisco.com"
+    DESCRIPTION
+        "The MIB module for entities implementing the VTP
+        protocol and Vlan management."
+    REVISION        "201005120000Z"
+    DESCRIPTION
+        "Added vlanTrunkPortActiveVlansGroup.
+        Updated the description of vtpServerDisabled."
+    REVISION        "200912030000Z"
+    DESCRIPTION
+        "Added vtpTrunkPruningGroup3 and
+        vtpConfigNotificationsGroup8. Modified the
+        description of vtpNotificationsEnabled and
+        managementDomainPruningState."
+    REVISION        "200803070000Z"
+    DESCRIPTION
+        "Added vlanStatsGroup. Deprecated
+        vtpConfigNotificationsGroup5 and replaced
+        it with vtpConfigNotificationsGroup6 and
+        vtpConfigNotificationsGroup7."
+    REVISION        "200710040000Z"
+    DESCRIPTION
+        "Correct the descriptions of the object
+        vtpConfigDigestErrors and the tables vtpVlanTable
+        and vtpInternalVlanTable."
+    REVISION        "200602170000Z"
+    DESCRIPTION
+        "Removed the OwnerString TEXTUAL-CONVENTION and
+        imported the same from RMON-MIB."
+    REVISION        "200402110000Z"
+    DESCRIPTION
+        "Added 'dynamicGvrp(4)' for the TC VlanTypeExt."
+    REVISION        "200311210000Z"
+    DESCRIPTION
+        "Add vtpInternalVlanGrp to configure internal
+        VLANs' allocation policy and show the owner 
+        application names."
+    REVISION        "200308080000Z"
+    DESCRIPTION
+        "Split vtpConfigNotificationsGroup into two groups:
+        vtpConfigNotificationsGroupRev1 and 
+        vtpConfigNotificationsGroup5. Write a new compliance
+        statement to list vtpConfigNotificationsGroupRev1 in
+        instead of vtpConfigNotificationsGroup in the 
+        MANDATORY-GROUPS."
+    REVISION        "200307110000Z"
+    DESCRIPTION
+        "Modify the description of the TC VlanIndex."
+    REVISION        "200304160000Z"
+    DESCRIPTION
+        "Add support for VTP version 3 features.
+        -- Add enumerators and modify the 'DESCRIPTION' of 6 
+           existing objects: 
+           vtpVersion, managementDomainLocalMode,
+           managementDomainConfigRevNumber, 
+           managementDomainLastUpdater,
+           managementDomainLastChange,  
+           managementDomainVersionInUse.
+        -- Add 3 new groups: vtpAuthGroup, 
+           vtpDiscoverGroup, vtpDatabaseGroup."
+    REVISION        "200204100000Z"
+    DESCRIPTION
+        "-- Add 4 new notifications/traps vtpLocalModeChanged,
+        vtpVersionInUseChanged, vtpVlanCreated and 
+        vtpVlanDeleted. 
+        -- Add 2 new objects vtpVlanCreatedNotifEnabled and 
+        vtpVlanDeletedNotifEnabled to control the
+        generation of vtpVlanCreated and vtpVlanDeleted.
+        -- Use vtpNotificationsEnabled to control the
+        generation of vtpLocalModeChanged and
+        vtpVersionInUseChanged by grouping them in a
+        new group vtpConfigNotificationsGroup2.  
+        -- Deprecate the object vlanTrunkPortsDot1qTag and
+        its related group."
+    REVISION        "200202280000Z"
+    DESCRIPTION
+        "Deprecate the object, vlanTrunkPortDot1qTunnel."
+    REVISION        "200108030000Z"
+    DESCRIPTION
+        "Add a new off(4) mode to managementDomainLocalMode."
+    REVISION        "200102260000Z"
+    DESCRIPTION
+        "Deprecate read-only object vtpVlanEditTypeExt and
+        add a new read-create object vtpVlanEditTypeExt2.
+        Enable Notification groups."
+    REVISION        "200102120000Z"
+    DESCRIPTION
+        "Added Remote SPAN (RSPAN) VLAN feature, VLAN
+        management features without supporting VTP protocol
+        and a new object to handle one-VLAN-editing."
+    REVISION        "200009190000Z"
+    DESCRIPTION
+        "Added the mapping from VLAN ID to its corresponding
+        ifIndex"
+    REVISION        "200004100000Z"
+    DESCRIPTION
+        "Added 4k VLAN editing and Dot1qTunnel support"
+    REVISION        "200001060000Z"
+    DESCRIPTION
+        "Added 4k VLAN support"
+    REVISION        "9902251130Z"
+    DESCRIPTION
+        "Added import of NOTIFICATION-GROUP"
+    REVISION        "9901051130Z"
+    DESCRIPTION
+        "Added support for encapsulation type notApplicable"
+    REVISION        "9805191130Z"
+    DESCRIPTION
+        "Added support for encapsulation type negotiation"
+    REVISION        "9708081138Z"
+    DESCRIPTION
+        "Added Backup CRF object"
+    REVISION        "9705091130Z"
+    DESCRIPTION
+        "Added ARE and STE hop counts."
+    REVISION        "9702241115Z"
+    DESCRIPTION
+        "Added support for turning on VTP for Trunk cards."
+    REVISION        "9701271730Z"
+    DESCRIPTION
+        "Added support for version 2 features."
+    REVISION        "9609161230Z"
+    DESCRIPTION
+        "Updated the Token-Ring support."
+    REVISION        "9607171230Z"
+    DESCRIPTION
+        "Updated to include objects in support of VTP pruning."
+    REVISION        "9601181820Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { ciscoMgmt 46 }
+
+
+vtpMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoVtpMIB 1 }
+
+
+-- Textual Conventions
+
+VlanIndex ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The VLAN-id of a VLAN on ISL or 802.1q trunks.
+
+        Modification of default parameters is allowed.
+        Implementations are allowed to restrict
+        the range of VLANs.
+
+        For entities support up to 1024 VLANS.
+        VLANs above 1000 are reserved for default VLANs and
+        future use. Modification of default parameters is
+        allowed. Creation or deletion of VLANs above 1000 is not
+        allowed.
+
+        For a new object which needs the vlan-id of a VLAN as
+        its SYNTAX, it is suggested to import VlanIndex from
+        Q-BRIDGE-MIB instead of importing this TC here in 
+        CISCO-VTP-MIB."
+    SYNTAX          Integer32 (0..4095)
+
+ManagementDomainIndex ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An arbitrary integer-value to uniquely identify a
+        management domain on the local system."
+    SYNTAX          Integer32 (1..255)
+
+VlanType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The type of a VLAN.
+
+        Note that the 'ethernet' type, is used for any ethernet or
+        802.3 VLAN, including an ATM Ethernet ELAN; and the
+        'tokenRing' ('trCrf') type is used for each VLAN
+        representing a single logical 802.5 ring including an ATM
+        Token-Ring ELAN.
+
+        The 'trCrf' type is used for token ring VLANs made up of
+        (at most) one transparently bridged LAN segment.
+
+        The 'trBrf' type is used for VLANs which represent the
+        scope of many 'trCrf' VLANs all connected together via
+        source route bridging.  The token ring 'trBrf' can be said
+        to represent the bridged broadcast domain."
+    SYNTAX          INTEGER  {
+                        ethernet(1),
+                        fddi(2),
+                        tokenRing(3), -- also known as trCrf
+                        fddiNet(4),
+                        trNet(5), -- also known as trBrf
+                        deprecated(6)
+                    }
+
+VlanTypeExt ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The additional type information of VLAN.
+        vtpmanageable(0)    An user defined VLAN which is 
+                            manageable through VTP protocol.
+                            The value of this bit cannot be 
+                            changed.
+        internal(1)         An internal VLAN created by the device.
+                            Internal VLANs cannot be created or
+                            deleted. The value of this bit cannot
+                            be changed.
+        reserved(2)         A VLAN reserved by the device.
+                            Reserved VLANs cannot be created or
+                            deleted. The value of this bit cannot
+                            be changed.
+        rspan(3)            A VLAN created to exclusively carry
+                            the traffic for a Remote Switched
+                            Port Analyzer (RSPAN). This bit can
+                            only be set or cleared during the
+                            VLAN creation. Once the VLAN is
+                            created, the value of this bit cannot
+                            be modified.
+        dynamicGvrp(4)      A VLAN dynamically created by GVRP
+                            (GARP VLAN Registration Protocol)
+                            propagation. The value of this bit 
+                            cannot be changed."
+
+    REFERENCE       "RFC2674."
+    SYNTAX          BITS {
+                        vtpmanageable(0),
+                        internal(1),
+                        reserved(2),
+                        rspan(3),
+                        dynamicGvrp(4)
+                    }
+-- VTP status
+
+vtpStatus  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 1 }
+
+
+vtpVersion OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        one(1),
+                        two(2),
+                        none(3),
+                        three(4)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The version of VTP in use on the local system.  A device
+        will report its version capability and not any particular
+        version in use on the device. If the device does not support
+        vtp, the version is none(3)." 
+    ::= { vtpStatus 1 }
+
+vtpMaxVlanStorage OBJECT-TYPE
+    SYNTAX          Integer32 (-1..1023)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "An estimate of the maximum number of VLANs about which the
+        local system can recover complete VTP information after a
+        reboot.  If the number of defined VLANs is greater than this
+        value, then the system can not act as a VTP Server. For a
+        device which has no means to calculate the estimated number,
+        this value is -1." 
+    ::= { vtpStatus 2 }
+
+vtpNotificationsEnabled OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "An indication of whether the notifications/traps defined by
+        the vtpConfigNotificationsGroup, vtpConfigNotificationsGroup2,
+        and vtpConfigNotificationsGroup8 are enabled." 
+    ::= { vtpStatus 3 }
+
+vtpVlanCreatedNotifEnabled OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "An indication of whether the notification should
+        be generated when a VLAN is created. 
+
+        If the value of this object is 'true' then the
+        vtpVlanCreated notification will be generated.
+
+        If the value of this object is 'false' then the
+        vtpVlanCreated notification will not be generated." 
+    ::= { vtpStatus 4 }
+
+vtpVlanDeletedNotifEnabled OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "An indication of whether the notification should
+        be generated when a VLAN is deleted.  
+
+        If the value of this object is 'true' then the
+        vtpVlanDeleted notification will be generated.
+
+        If the value of this object is 'false' then the
+        vtpVlanDeleted notification will not be generated." 
+    ::= { vtpStatus 5 }
+-- VTP Management Domains
+
+vlanManagementDomains  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 2 }
+
+
+managementDomainTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF ManagementDomainEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table containing information on the management domains
+        in which the local system is participating.  Devices which
+        support only one management domain will support just one row
+        in this table, and will not let it be deleted nor let other
+        rows be created.  Devices which support multiple management
+        domains will allow rows to be created and deleted, but will
+        not allow the last row to be deleted. If the device does 
+        not support VTP, the table is read-only."
+    ::= { vlanManagementDomains 1 }
+
+managementDomainEntry OBJECT-TYPE
+    SYNTAX          ManagementDomainEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about the status of one management domain."
+    INDEX           { managementDomainIndex } 
+    ::= { managementDomainTable 1 }
+
+ManagementDomainEntry ::= SEQUENCE {
+        managementDomainIndex            ManagementDomainIndex,
+        managementDomainName             DisplayString,
+        managementDomainLocalMode        INTEGER,
+        managementDomainConfigRevNumber  Gauge32,
+        managementDomainLastUpdater      IpAddress,
+        managementDomainLastChange       DateAndTime,
+        managementDomainRowStatus        RowStatus,
+        managementDomainTftpServer       IpAddress,
+        managementDomainTftpPathname     DisplayString,
+        managementDomainPruningState     INTEGER,
+        managementDomainVersionInUse     INTEGER,
+        managementDomainPruningStateOper INTEGER
+}
+
+managementDomainIndex OBJECT-TYPE
+    SYNTAX          ManagementDomainIndex
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An arbitrary value to uniquely identify the management
+        domain on the local system." 
+    ::= { managementDomainEntry 1 }
+
+managementDomainName OBJECT-TYPE
+    SYNTAX          DisplayString (SIZE  (0..32))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The management name of a domain in which the local system
+        is participating.  The zero-length name corresponds to the
+        'no management-domain' state which is the initial value at
+        installation-time if not configured otherwise.  Note that
+        the zero-length name does not correspond to an operational
+        management domain, and a device does not send VTP
+        advertisements while in the 'no management-domain' state.  A
+        device leaves the 'no management-domain' state when it
+        obtains a management-domain name, either through
+        configuration or through inheriting the management-domain
+        name from a received VTP advertisement.
+
+        When the value of an existing instance of this object is
+        modified by network management, the local system should re-
+        initialize its VLAN information (for the given management
+        domain) as if it had just been configured with a management
+        domain name at installation time." 
+    ::= { managementDomainEntry 2 }
+
+managementDomainLocalMode OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3),
+                        off(4)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The local VTP mode in this management domain when
+        managementDomainVersionInUse is version1(1) or
+        version2(2).
+
+        If managementDomainVersionInUse is version3(4), this 
+        object has the same value with vtpDatabaseLocalMode 
+        of VLAN database type.
+
+        - 'client' indicates that the local system is acting
+          as a VTP client.
+
+        - 'server' indicates that the local system is acting
+          as a VTP server.
+
+        - 'transparent' indicates that the local system does
+          not generate or listen to VTP messages, but forwards
+          messages. This mode can also be set by the device
+          itself when the amount of VLAN information is too
+          large for it to hold in DRAM.
+
+        - 'off' indicates that the local system does not
+          generate, listen to or forward any VTP messages." 
+    ::= { managementDomainEntry 3 }
+
+managementDomainConfigRevNumber OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current Configuration Revision Number as known by
+        the local device for this management domain when 
+        managementDomainVersionInUse is version1(1) or 
+        version2(2).
+
+        If managementDomainVersionInUse is version3(4), this 
+        object has the same value with vtpDatabaseRevisionNumber 
+        of VLAN database type.
+
+        This value is updated (if necessary) whenever a VTP
+        advertisement is received or generated. When in the
+        'no management-domain' state, this value is 0." 
+    ::= { managementDomainEntry 4 }
+
+managementDomainLastUpdater OBJECT-TYPE
+    SYNTAX          IpAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The IP-address (or one of them) of the VTP Server which
+        last updated the Configuration Revision Number, as indicated
+        in the most recently received VTP advertisement for this
+        management domain, when managementDomainVersionInUse is
+        version1(1) or version2(2). 
+
+        If managementDomainVersionInUse is version3(4), this object
+        has the value of 0.0.0.0.
+
+        Before an advertisement has been received, this value is
+        0.0.0.0." 
+    ::= { managementDomainEntry 5 }
+
+managementDomainLastChange OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The time at which the Configuration Revision Number was
+        (last) increased to its current value, as indicated in the
+        most recently received VTP advertisement for this management
+        domain when managementDomainVersionInUse is not version3(4)
+        or in the most recently received VTP VLAN database 
+        advertisement for this management domain when 
+        managementDomainVersionInUse is version3(4).
+
+        The value 0x0000010100000000 indicates that the device which
+        last increased the Configuration Revision Number had no idea
+        of the date/time, or that no advertisement has been
+        received." 
+    ::= { managementDomainEntry 6 }
+
+managementDomainRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The status of this conceptual row." 
+    ::= { managementDomainEntry 7 }
+
+managementDomainTftpServer OBJECT-TYPE
+    SYNTAX          IpAddress
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The IP address of a TFTP Server in/from which VTP VLAN
+        information for this management domain is to be
+        stored/retrieved.  If the information is being locally
+        stored in NVRAM, this object should take the value 0.0.0.0." 
+    ::= { managementDomainEntry 8 }
+
+managementDomainTftpPathname OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The complete pathname of the file at the TFTP Server
+        identified by the value of managementDomainTftpServer
+        in/from which VTP VLAN information for this management
+        domain is to be stored/retrieved.  If the value of
+        corresponding instance of managementDomainTftpServer is
+        0.0.0.0, the value of this object is ignored." 
+    ::= { managementDomainEntry 9 }
+
+managementDomainPruningState OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        enabled(1),
+                        disabled(2)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "An indication of whether VTP pruning is enabled or disabled
+        in this managament domain. 
+
+        This object can only be modified, either when the 
+        corresponding instance value of managementDomainVersionInUse 
+        is 'version1' or 'version2' and the corresponding instance 
+        value of managementDomainLocalMode is 'server', or when the 
+        corresponding instance value of managementDomainVersionInUse 
+        is 'version3' and the corresponding instance value of 
+        managementDomainLocalMode is 'server' or 'client'." 
+    ::= { managementDomainEntry 10 }
+
+managementDomainVersionInUse OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        version1(1),
+                        version2(2),
+                        none(3),
+                        version3(4)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The current version of the VTP that is in use by the
+        designated management domain. 
+
+        This object can be set to none(3) only when 
+        vtpVersion is none(3)." 
+    ::= { managementDomainEntry 11 }
+
+managementDomainPruningStateOper OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        enabled(1),
+                        disabled(2)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates whether VTP pruning is operationally enabled or
+        disabled in this managament domain." 
+    ::= { managementDomainEntry 12 }
+ 
+
+-- VLAN information
+
+vlanInfo  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 3 }
+
+-- Global information on current VLANs
+--   
+-- This information is maintained by VTP Clients and VTP Servers
+
+vtpVlanTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpVlanEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information on the VLANs which
+        currently exist."
+    ::= { vlanInfo 1 }
+
+vtpVlanEntry OBJECT-TYPE
+    SYNTAX          VtpVlanEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about one current VLAN.  The
+        managementDomainIndex value in the INDEX clause indicates
+        which management domain the VLAN is in."
+    INDEX           {
+                        managementDomainIndex,
+                        vtpVlanIndex
+                    } 
+    ::= { vtpVlanTable 1 }
+
+VtpVlanEntry ::= SEQUENCE {
+        vtpVlanIndex              VlanIndex,
+        vtpVlanState              INTEGER,
+        vtpVlanType               VlanType,
+        vtpVlanName               DisplayString,
+        vtpVlanMtu                Integer32,
+        vtpVlanDot10Said          OCTET STRING,
+        vtpVlanRingNumber         Integer32,
+        vtpVlanBridgeNumber       Integer32,
+        vtpVlanStpType            INTEGER,
+        vtpVlanParentVlan         VlanIndex,
+        vtpVlanTranslationalVlan1 VlanIndex,
+        vtpVlanTranslationalVlan2 VlanIndex,
+        vtpVlanBridgeType         INTEGER,
+        vtpVlanAreHopCount        Integer32,
+        vtpVlanSteHopCount        Integer32,
+        vtpVlanIsCRFBackup        TruthValue,
+        vtpVlanTypeExt            VlanTypeExt,
+        vtpVlanIfIndex            InterfaceIndexOrZero
+}
+
+vtpVlanIndex OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The VLAN-id of this VLAN on ISL or 802.1q trunks." 
+    ::= { vtpVlanEntry 1 }
+
+vtpVlanState OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        operational(1),
+                        suspended(2),
+                        mtuTooBigForDevice(3),
+                        mtuTooBigForTrunk(4)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The state of this VLAN.
+
+        The state 'mtuTooBigForDevice' indicates that this device
+        cannot participate in this VLAN because the VLAN's MTU is
+        larger than the device can support.
+
+        The state 'mtuTooBigForTrunk' indicates that while this
+        VLAN's MTU is supported by this device, it is too large for
+        one or more of the device's trunk ports." 
+    ::= { vtpVlanEntry 2 }
+
+vtpVlanType OBJECT-TYPE
+    SYNTAX          VlanType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The type of this VLAN." 
+    ::= { vtpVlanEntry 3 }
+
+vtpVlanName OBJECT-TYPE
+    SYNTAX          DisplayString (SIZE  (1..32))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The name of this VLAN.  This name is used as the ELAN-name
+        for an ATM LAN-Emulation segment of this VLAN." 
+    ::= { vtpVlanEntry 4 }
+
+vtpVlanMtu OBJECT-TYPE
+    SYNTAX          Integer32 (1500..18190)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The MTU size on this VLAN, defined as the size of largest
+        MAC-layer (information field portion of the) data frame
+        which can be transmitted on the VLAN." 
+    ::= { vtpVlanEntry 5 }
+
+vtpVlanDot10Said OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (4))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The value of the 802.10 SAID field for this VLAN." 
+    ::= { vtpVlanEntry 6 }
+
+vtpVlanRingNumber OBJECT-TYPE
+    SYNTAX          Integer32 (0..4095)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The ring number of this VLAN.  This object is only
+        instantiated when the value of the corresponding instance of
+        vtpVlanType has a value of 'fddi' or 'tokenRing' and Source
+        Routing is in use on this VLAN." 
+    ::= { vtpVlanEntry 7 }
+
+vtpVlanBridgeNumber OBJECT-TYPE
+    SYNTAX          Integer32 (0..15)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The bridge number of the VTP-capable switches for this
+        VLAN.  This object is only instantiated for VLANs that are
+        involved with emulating token ring segments." 
+    ::= { vtpVlanEntry 8 }
+
+vtpVlanStpType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        ieee(1),
+                        ibm(2),
+                        hybrid(3)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The type of the Spanning Tree Protocol (STP) running on
+        this VLAN.  This object is only instanciated when the
+        value of the corresponding instance of vtpVlanType has a
+        value of 'fddiNet' or 'trNet'.
+
+        The value returned by this object depends upon the value
+        of the corresponding instance of vtpVlanEditStpType.
+
+        - 'ieee' indicates IEEE STP is running exclusively.
+
+        - 'ibm' indicates IBM STP is running exclusively.
+
+        - 'hybrid' indicates a STP that allows a combination of
+          IEEE and IBM is running.
+
+        The 'hybrid' STP type results from tokenRing/fddi VLANs
+        that are children of this trNet/fddiNet parent VLAN being
+        configured in a combination of SRT and SRB
+        vtpVlanBridgeTypes while the instance of
+        vtpVlanEditStpType that corresponds to this object is set
+        to 'auto'." 
+    ::= { vtpVlanEntry 9 }
+
+vtpVlanParentVlan OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The parent VLAN for this VLAN.  This object is only
+        instantiated when the value of the corresponding instance of
+        vtpVlanType has a value of 'fddi' or 'tokenRing' and Source
+        Routing is in use on this VLAN.  The parent VLAN must have 
+        a vtpVlanType value of fddiNet(4) or trNet(5), 
+        respectively." 
+    ::= { vtpVlanEntry 10 }
+
+vtpVlanTranslationalVlan1 OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A VLAN to which this VLAN is being translational-bridged.
+        If this value and the corresponding instance of
+        vtpVlanTranslationalVlan2 are both zero, then this VLAN is
+        not being translational-bridged." 
+    ::= { vtpVlanEntry 11 }
+
+vtpVlanTranslationalVlan2 OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Another VLAN, i.e., other than that indicated by
+        vtpVlanTranslationalVlan1, to which this VLAN is being
+        translational-bridged.  If this value and the corresponding
+        instance of vtpVlanTranslationalVlan1 are both zero, then
+        this VLAN is not being translational-bridged." 
+    ::= { vtpVlanEntry 12 }
+
+vtpVlanBridgeType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        srt(1),
+                        srb(2)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The type of the Source Route bridging mode in use on this
+        VLAN.  This object is only instantiated when the value of 
+        the corresponding instance of vtpVlanType has a value of 
+        fddi(2) or tokenRing(3) and Source Routing is in use on
+        this VLAN." 
+    ::= { vtpVlanEntry 13 }
+
+vtpVlanAreHopCount OBJECT-TYPE
+    SYNTAX          Integer32 (1..13)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The maximum number of bridge hops allowed in
+        All Routes Explorer frames on this VLAN.  This
+        object is only instantiated when the value of the
+        corresponding instance of vtpVlanType has a value of fddi(2)
+        or tokenRing(3) and Source Routing is in use on this VLAN." 
+    ::= { vtpVlanEntry 14 }
+
+vtpVlanSteHopCount OBJECT-TYPE
+    SYNTAX          Integer32 (1..13)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The maximum number of bridge hops allowed in
+        Spanning Tree Explorer frames on this VLAN.  This
+        object is only instantiated when the value of the
+        corresponding instance of vtpVlanType has a value of fddi(2)
+        or tokenRing(3) and Source Routing is in use on this VLAN." 
+    ::= { vtpVlanEntry 15 }
+
+vtpVlanIsCRFBackup OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "True if this VLAN is of type trCrf and also is acting as
+        a backup trCrf for the ISL distributed BRF" 
+    ::= { vtpVlanEntry 16 }
+
+vtpVlanTypeExt OBJECT-TYPE
+    SYNTAX          VlanTypeExt
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The additional type information of this VLAN." 
+    ::= { vtpVlanEntry 17 }
+
+vtpVlanIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndexOrZero
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The value of the ifIndex corresponding to this VLAN ID.
+        If the VLAN ID does not have its corresponding interface, 
+        this object has the value of zero." 
+    ::= { vtpVlanEntry 18 }
+ 
+
+internalVlanInfo  OBJECT IDENTIFIER
+    ::= { vlanInfo 2 }
+
+
+vtpInternalVlanAllocPolicy OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        ascending(1),
+                        descending(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The internal VLAN allocation policy.
+
+        'ascending'  - internal VLANs are allocated
+                       starting from a lowwer VLAN ID and 
+                       upwards.
+        'descending' - internal VLANs are allocated
+                       starting from a higher VLAN ID and
+                       downwards." 
+    ::= { internalVlanInfo 1 }
+
+vtpInternalVlanTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpInternalVlanEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A vtpInternalVlanTable entry contains
+        information on an existing internal
+        VLAN. It is internally created by the
+        device for a specific application program 
+        and hence owned by the application.  
+        It cannot be modified or deleted by (local 
+        or network) management."
+    ::= { internalVlanInfo 2 }
+
+vtpInternalVlanEntry OBJECT-TYPE
+    SYNTAX          VtpInternalVlanEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about one current internal
+        VLAN."
+    INDEX           {
+                        managementDomainIndex,
+                        vtpVlanIndex
+                    } 
+    ::= { vtpInternalVlanTable 1 }
+
+VtpInternalVlanEntry ::= SEQUENCE {
+        vtpInternalVlanOwner SnmpAdminString
+}
+
+vtpInternalVlanOwner OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The program name of the internal VLAN's
+        owner application. This internal VLAN
+        is allocated by the device specifically
+        for this application and no one else
+        could create, modify or delete this 
+        VLAN." 
+    ::= { vtpInternalVlanEntry 1 }
+ 
+
+-- Modification of Global VLAN Information
+--   
+-- To change the global information on current VLANs, including
+-- creating, modifying or deleting them,
+-- . the current VLAN information is copied to the "Edit buffer",
+-- . the information in the Edit buffer is modified as appropriate,
+-- . an 'apply' is invoked to attempt to instanciate the modified
+-- contents of the Edit Buffer as the new global VLAN information.
+--   
+-- Only one manager can edit the Edit Buffer at a time.  So, a
+-- request to copy the current VLAN information into the Edit Buffer
+-- must fail if the Edit Buffer is already in use (i.e., is not empty).
+-- Thus, concurrent attempts by multiple managers to gain use of the
+-- Edit Buffer are resolved according to whichever of them succeeds
+-- in performing a successful copy.  An OwnerString object provides
+-- information on which manager currently has access.
+--   
+-- Ownership of the Edit Buffer terminates when a NMS explicitly
+-- releases it, or when a deadman-timer expires.  The deadman-timer
+-- has a fixed expiry interval of 5 minutes.  The deadman-timer is
+-- automatically started on a successful copy operation.  The
+-- restartTimer operation allows an NMS to restart the deadman-timer
+-- if it wishes to retain ownership of the Edit Buffer for longer
+-- than 5 minutes.  The deadman-timer ceases when the apply operation
+-- is invoked, and is restarted when the apply operation terminates.
+-- Restarting the deadman-timer after termination of the apply
+-- operation allows the results of the apply operation to be retained
+-- until the requesting manager has retrieved them, but for only a
+-- limited amount of time.
+--   
+-- When managementDomainVersionInUse is version1(1) or version2(2),
+-- the local device with managementDomainLocalMode as server(2)
+-- could change the global VLAN configuration by editing the VLAN
+-- information in the edit buffer and then apply it. However,
+-- when managementDomainVersionInUse is in version3(4), there
+-- are two different VTP servers, the primary server and the
+-- secondary server. The global VLAN configuration could only
+-- be changed by a primary server for VLAN database. The
+-- secondary server may still do the 'copy' operation and edit
+-- the VLAN information in the edit buffer. But in order to make
+-- a possibly successful 'apply' operation, the local device must
+-- be a VLAN database primary server. Otherwise, the 'apply' will
+-- fail and vtpVlanApplyStatus will be set to the error status
+-- 'notPrimaryServer'.
+
+vlanEdit  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 4 }
+
+
+vtpEditControlTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpEditControlEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table provides the means to control the editing of the
+        VLANs for a particular management domain.  Each and every
+        entry in this table augments its corresponding entry in the
+        managementDomainTable; thus, an entry in this table is
+        created/deleted only as a by-product of creating/deleting an
+        entry in the managementDomainTable."
+    ::= { vlanEdit 1 }
+
+vtpEditControlEntry OBJECT-TYPE
+    SYNTAX          VtpEditControlEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Control information for editing the VLANs in one management
+        domain."
+    AUGMENTS           { managementDomainEntry  } 
+    ::= { vtpEditControlTable 1 }
+
+VtpEditControlEntry ::= SEQUENCE {
+        vtpVlanEditOperation       INTEGER,
+        vtpVlanApplyStatus         INTEGER,
+        vtpVlanEditBufferOwner     OwnerString,
+        vtpVlanEditConfigRevNumber Gauge32,
+        vtpVlanEditModifiedVlan    VlanIndex
+}
+
+vtpVlanEditOperation OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        none(1),
+                        copy(2),
+                        apply(3),
+                        release(4),
+                        restartTimer(5)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object always has the value 'none' when read.  When
+        written, each value causes the appropriate action:
+
+         'copy' - causes the creation of rows in the
+        vtpVlanEditTable exactly corresponding to the current global
+        VLAN information for this management domain.  If the Edit
+        Buffer (for this management domain) is not currently empty,
+        a copy operation fails.  A successful copy operation starts
+        the deadman-timer.
+
+         'apply' - first performs a consistent check on the the
+        modified information contained in the Edit Buffer, and if
+        consistent, then tries to instanciate the modified
+        information as the new global VLAN information.  Note that
+        an empty Edit Buffer (for the management domain) would
+        always result in an inconsistency since the default VLANs
+        are required to be present.
+
+         'release' - flushes the Edit Buffer (for this management
+        domain), clears the Owner information, and aborts the
+        deadman-timer.  A release is generated automatically if the
+        deadman-timer ever expires.
+
+         'restartTimer' - restarts the deadman-timer.
+
+         'none' - no operation is performed." 
+    ::= { vtpEditControlEntry 1 }
+
+vtpVlanApplyStatus OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        inProgress(1),
+                        succeeded(2),
+                        configNumberError(3),
+                        inconsistentEdit(4),
+                        tooBig(5),
+                        localNVStoreFail(6),
+                        remoteNVStoreFail(7),
+                        editBufferEmpty(8),
+                        someOtherError(9),
+                        notPrimaryServer(10)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current status of an 'apply' operation to instanciate
+        the Edit Buffer as the new global VLAN information (for this
+        management domain).  If no apply is currently active, the
+        status represented is that of the most recently completed
+        apply.  The possible values are:
+
+           inProgress - 'apply' operation in progress;
+
+           succeeded - the 'apply' was successful (this value is
+                  also used when no apply has been invoked since the
+                  last time the local system restarted);
+
+           configNumberError - the apply failed because the value of
+                  vtpVlanEditConfigRevNumber was less or equal to
+                  the value of current value of 
+                  managementDomainConfigRevNumber;
+
+           inconsistentEdit - the apply failed because the modified
+                  information was not self-consistent;
+
+           tooBig - the apply failed because the modified
+                  information was too large to fit in this VTP
+                  Server's non-volatile storage location;
+
+           localNVStoreFail - the apply failed in trying to store
+                  the new information in a local non-volatile
+                  storage location;
+
+           remoteNVStoreFail - the apply failed in trying to store
+                  the new information in a remote non-volatile
+                  storage location;
+
+           editBufferEmpty - the apply failed because the Edit
+                  Buffer was empty (for this management domain).
+
+           someOtherError - the apply failed for some other reason
+                  (e.g., insufficient memory).
+
+           notPrimaryServer - the apply failed because the local 
+                  device is not a VTP primary server for VLAN 
+                  database type when managementDomainVersionInUse
+                  is version3(4)." 
+    ::= { vtpEditControlEntry 2 }
+
+vtpVlanEditBufferOwner OBJECT-TYPE
+    SYNTAX          OwnerString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The management station which is currently using the Edit
+        Buffer for this management domain.  When the Edit Buffer for
+        a management domain is not currently in use, the value of
+        this object is the zero-length string.  Note that it is also
+        the zero-length string if a manager fails to set this object
+        when invoking a copy operation." 
+    ::= { vtpEditControlEntry 3 }
+
+vtpVlanEditConfigRevNumber OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The Configuration Revision Number to be used for the next
+        apply operation.  This value is initialized (by the agent)
+        on a copy operation to be one greater than the value of
+        managementDomainConfigRevNumber. On an apply, if the 
+        number is less or equal to the value of 
+        managementDomainConfigRevNumber, then the apply fails.
+        The value can be modified (increased) by network management
+        before an apply to ensure that an apply does not fail for 
+        this reason.
+
+        This object is used to allow management control over whether
+        a configuration revision received via a VTP advertisement
+        after a copy operation but before the succeeding apply
+        operation is lost by being overwritten by the (local) edit
+        operation.  By default, the apply operation will fail in
+        this situation.  By increasing this object's value after the
+        copy but before the apply, management can control whether
+        the apply is to succeed (with the update via VTP
+        advertisement being lost)." 
+    ::= { vtpEditControlEntry 4 }
+
+vtpVlanEditModifiedVlan OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The VLAN-id of the modified VLAN in the Edit Buffer.
+        If the object has the value of zero, any VLAN can 
+        be edited. If the value of the object is not zero,
+        only this VLAN can be edited.
+
+        The object's value is reset to zero after a successful
+        'apply' operation or a 'release' operation. 
+
+        This object is only supported for devices which allow 
+        only one VLAN editing for each 'apply' operation. For
+        devices which allow multiple VLAN editing for each
+        'apply' operation, this object is not supported." 
+    ::= { vtpEditControlEntry 5 }
+ 
+
+
+vtpVlanEditTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpVlanEditEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table which contains the information in the Edit
+        Buffers, one Edit Buffer per management domain.  The
+        information for a particular management domain is
+        initialized, by a 'copy' operation, to be the current global
+        VLAN information for that management domain.  After
+        initialization, editing can be performed to add VLANs,
+        delete VLANs, or modify their global parameters.  The
+        information as modified through editing is local to this
+        Edit Buffer.  An apply operation using the
+        vtpVlanEditOperation object is necessary to instanciate the
+        modified information as the new global VLAN information for
+        that management domain.
+
+        To use the Edit Buffer, a manager acts as follows:
+
+        1. ensures the Edit Buffer for a management domain is empty,
+        i.e., there are no rows in this table for this management
+        domain.
+
+        2. issues a SNMP set operation which sets
+        vtpVlanEditOperation to 'copy', and vtpVlanEditBufferOwner
+        to its own identifier (e.g., its own IP address).
+
+        3. if this set operation is successful, proceeds to edit the
+        information in the vtpVlanEditTable.
+
+        4. if and when the edited information is to be instantiated,
+        issues a SNMP set operation which sets vtpVlanEditOperation
+        to 'apply'.
+
+        5. issues retrieval requests to obtain the value of
+        vtpVlanApplyStatus, until the result of the apply is
+        determined.
+
+        6. releases the Edit Buffer by issuing a SNMP set operation
+        which sets vtpVlanEditOperation to 'release'.
+
+        Note that the information contained in this table is not
+        saved across agent reboots."
+    ::= { vlanEdit 2 }
+
+vtpVlanEditEntry OBJECT-TYPE
+    SYNTAX          VtpVlanEditEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about one VLAN in the Edit Buffer for a
+        particular management domain."
+    INDEX           {
+                        managementDomainIndex,
+                        vtpVlanEditIndex
+                    } 
+    ::= { vtpVlanEditTable 1 }
+
+VtpVlanEditEntry ::= SEQUENCE {
+        vtpVlanEditIndex              VlanIndex,
+        vtpVlanEditState              INTEGER,
+        vtpVlanEditType               VlanType,
+        vtpVlanEditName               DisplayString,
+        vtpVlanEditMtu                Integer32,
+        vtpVlanEditDot10Said          OCTET STRING,
+        vtpVlanEditRingNumber         Integer32,
+        vtpVlanEditBridgeNumber       Integer32,
+        vtpVlanEditStpType            INTEGER,
+        vtpVlanEditParentVlan         VlanIndex,
+        vtpVlanEditRowStatus          RowStatus,
+        vtpVlanEditTranslationalVlan1 VlanIndex,
+        vtpVlanEditTranslationalVlan2 VlanIndex,
+        vtpVlanEditBridgeType         INTEGER,
+        vtpVlanEditAreHopCount        Integer32,
+        vtpVlanEditSteHopCount        Integer32,
+        vtpVlanEditIsCRFBackup        TruthValue,
+        vtpVlanEditTypeExt            VlanTypeExt,
+        vtpVlanEditTypeExt2           VlanTypeExt
+}
+
+vtpVlanEditIndex OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The VLAN-id which this VLAN would have on ISL or
+        802.1q trunks." 
+    ::= { vtpVlanEditEntry 1 }
+
+vtpVlanEditState OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        operational(1),
+                        suspended(2)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The state which this VLAN would have."
+    DEFVAL          { operational } 
+    ::= { vtpVlanEditEntry 2 }
+
+vtpVlanEditType OBJECT-TYPE
+    SYNTAX          VlanType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The type which this VLAN would have.
+        An implementation may restrict access to this object."
+    DEFVAL          { ethernet } 
+    ::= { vtpVlanEditEntry 3 }
+
+vtpVlanEditName OBJECT-TYPE
+    SYNTAX          DisplayString (SIZE  (1..32))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The name which this VLAN would have.  This name would be
+        used as the ELAN-name for an ATM LAN-Emulation segment of
+        this VLAN.
+
+        An implementation may restrict access to this object." 
+    ::= { vtpVlanEditEntry 4 }
+
+vtpVlanEditMtu OBJECT-TYPE
+    SYNTAX          Integer32 (1500..18190)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The MTU size which this VLAN would have, defined as the
+        size of largest MAC-layer (information field portion of the)
+        data frame which can be transmitted on the VLAN.
+
+        An implementation may restrict access to this object."
+    DEFVAL          { 1500 } 
+    ::= { vtpVlanEditEntry 5 }
+
+vtpVlanEditDot10Said OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (4))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of the 802.10 SAID field which would be used for
+        this VLAN.
+
+        An implementation may restrict access to this object." 
+    ::= { vtpVlanEditEntry 6 }
+
+vtpVlanEditRingNumber OBJECT-TYPE
+    SYNTAX          Integer32 (0..4095)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The ring number which would be used for this VLAN.  This
+        object is only instantiated when the value of the
+        corresponding instance of vtpVlanEditType has a value of
+        'fddi' or 'tokenRing' and Source Routing is in use on 
+        this VLAN." 
+    ::= { vtpVlanEditEntry 7 }
+
+vtpVlanEditBridgeNumber OBJECT-TYPE
+    SYNTAX          Integer32 (0..15)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The bridge number of the VTP-capable switches which would
+        be used for this VLAN.  This object is only instantiated
+        when the value of the corresponding instance of
+        vtpVlanEditType has a value of fddiNet(4) or trNet(5)." 
+    ::= { vtpVlanEditEntry 8 }
+
+vtpVlanEditStpType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        ieee(1),
+                        ibm(2),
+                        auto(3)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The type of the Spanning Tree Protocol which would be
+        running on this VLAN.  This object is only instantiated
+        when the value of the corresponding instance of
+        vtpVlanEditType has a value of fddiNet(4) or trNet(5).
+
+        If 'ieee' is selected, the STP that runs will be IEEE.
+
+        If 'ibm' is selected, the STP that runs will be IBM.
+
+        If 'auto' is selected, the STP that runs will be
+        dependant on the values of vtpVlanEditBridgeType for all
+        children tokenRing/fddi type VLANs.  This will result in
+        a 'hybrid' STP (see vtpVlanStpType)." 
+    ::= { vtpVlanEditEntry 9 }
+
+vtpVlanEditParentVlan OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The VLAN index of the VLAN which would be the parent for
+        this VLAN.  This object is only instantiated when the value
+        of the corresponding instance of vtpVlanEditType has a value
+        of 'fddi' or 'tokenRing' and Source Routing is in use on
+        this VLAN.  The parent VLAN must have a vtpVlanEditType 
+        value of fddiNet(4) or trNet(5), respectively." 
+    ::= { vtpVlanEditEntry 10 }
+
+vtpVlanEditRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The status of this row.  Any and all columnar objects in an
+        existing row can be modified irrespective of the status of
+        the row.
+
+        A row is not qualified for activation until instances of at
+        least its vtpVlanEditType, vtpVlanEditName and
+        vtpVlanEditDot10Said columns have appropriate values.
+
+        The management station should endeavor to make all rows
+        consistent in the table before 'apply'ing the buffer.  An
+        inconsistent entry in the table will cause the entire
+        buffer to be rejected with the vtpVlanApplyStatus object
+        set to the appropriate error value." 
+    ::= { vtpVlanEditEntry 11 }
+
+vtpVlanEditTranslationalVlan1 OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A VLAN to which this VLAN would be translational-bridged.
+        If this value and the corresponding instance of
+        vtpVlanTranslationalVlan2 are both zero, then this VLAN
+        would not be translational-bridged.
+
+        An implementation may restrict access to this object."
+    DEFVAL          { 0 } 
+    ::= { vtpVlanEditEntry 12 }
+
+vtpVlanEditTranslationalVlan2 OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Another VLAN, i.e., other than that indicated by
+        vtpVlanEditTranslationalVlan1, to which this VLAN would be
+        translational-bridged.  If this value and the corresponding
+        instance of vtpVlanTranslationalVlan1 are both zero, then
+        this VLAN would not be translational-bridged.
+
+        An implementation may restrict access to this object."
+    DEFVAL          { 0 } 
+    ::= { vtpVlanEditEntry 13 }
+
+vtpVlanEditBridgeType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        srt(1),
+                        srb(2)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The type of Source Route bridging mode which would be in
+        use on this VLAN.  This object is only instantiated when 
+        the value of  the corresponding instance of vtpVlanEditType
+        has a value of fddi(2) or tokenRing(3) and Source Routing 
+        is in use on this VLAN." 
+    ::= { vtpVlanEditEntry 14 }
+
+vtpVlanEditAreHopCount OBJECT-TYPE
+    SYNTAX          Integer32 (1..13)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The maximum number of bridge hops allowed in
+        All Routes Explorer frames on this VLAN.  This
+        object is only instantiated when the value of the
+        corresponding instance of vtpVlanType has a value of fddi(2)
+        or tokenRing(3) and Source Routing is in use on this VLAN." 
+    ::= { vtpVlanEditEntry 15 }
+
+vtpVlanEditSteHopCount OBJECT-TYPE
+    SYNTAX          Integer32 (1..13)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The maximum number of bridge hops allowed in
+        Spanning Tree Explorer frames on this VLAN.  This
+        object is only instantiated when the value of the
+        corresponding instance of vtpVlanType has a value of fddi(2)
+        or tokenRing(3) and Source Routing is in use on this VLAN." 
+    ::= { vtpVlanEditEntry 16 }
+
+vtpVlanEditIsCRFBackup OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "True if this VLAN is of type trCrf and also is acting as
+        a backup trCrf for the ISL distributed BRF.  This object is
+        only instantiated when the value of the corresponding
+        instance of vtpVlanEditType has a value of tokenRing(3)." 
+    ::= { vtpVlanEditEntry 17 }
+
+vtpVlanEditTypeExt OBJECT-TYPE
+    SYNTAX          VlanTypeExt
+    MAX-ACCESS      read-only
+    STATUS          deprecated
+    DESCRIPTION
+        "The additional type information of this VLAN." 
+    ::= { vtpVlanEditEntry 18 }
+
+vtpVlanEditTypeExt2 OBJECT-TYPE
+    SYNTAX          VlanTypeExt
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The additional type information of this VLAN.
+        The VlanTypeExt TC specifies which bits may
+        be written by a management application.
+        The agent should provide a default value." 
+    ::= { vtpVlanEditEntry 19 }
+ 
+
+-- VTP Statistics
+
+vtpStats  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 5 }
+
+
+vtpStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpStatsEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table of VTP statistics."
+    ::= { vtpStats 1 }
+
+vtpStatsEntry OBJECT-TYPE
+    SYNTAX          VtpStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "VTP statistics for one management domain."
+    AUGMENTS           { managementDomainEntry  } 
+    ::= { vtpStatsTable 1 }
+
+VtpStatsEntry ::= SEQUENCE {
+        vtpInSummaryAdverts      Counter32,
+        vtpInSubsetAdverts       Counter32,
+        vtpInAdvertRequests      Counter32,
+        vtpOutSummaryAdverts     Counter32,
+        vtpOutSubsetAdverts      Counter32,
+        vtpOutAdvertRequests     Counter32,
+        vtpConfigRevNumberErrors Counter32,
+        vtpConfigDigestErrors    Counter32
+}
+
+vtpInSummaryAdverts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The total number of VTP Summary Adverts received for this
+        management domain." 
+    ::= { vtpStatsEntry 1 }
+
+vtpInSubsetAdverts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The total number of VTP Subset Adverts received for this
+        management domain." 
+    ::= { vtpStatsEntry 2 }
+
+vtpInAdvertRequests OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The total number of VTP Advert Requests received for this
+        management domain." 
+    ::= { vtpStatsEntry 3 }
+
+vtpOutSummaryAdverts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The total number of VTP Summary Adverts sent for this
+        management domain." 
+    ::= { vtpStatsEntry 4 }
+
+vtpOutSubsetAdverts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The total number of VTP Subset Adverts sent for this
+        management domain." 
+    ::= { vtpStatsEntry 5 }
+
+vtpOutAdvertRequests OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The total number of VTP Advert Requests sent for this
+        management domain." 
+    ::= { vtpStatsEntry 6 }
+
+vtpConfigRevNumberErrors OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of occurrences of configuration revision number
+        errors for this management domain.  A configuration revision
+        number error occurs when a device receives a VTP
+        advertisement for which:
+
+        - the advertisement's Configuration Revision Number is the
+          same as the current locally-held value, and
+
+        - the advertisement's digest value is different from the
+          current locally-held value." 
+    ::= { vtpStatsEntry 7 }
+
+vtpConfigDigestErrors OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of occurrences of configuration digest errors
+        for this management domain.  A configuration digest error
+        occurs when a device receives a VTP advertisement for which:
+
+        - the advertisement's Configuration Revision Number is
+          greater than the current locally-held value, and
+
+        -  the advertisement's digest value computed by the
+         receiving device does not match the checksum in the
+         summary advertisement that was received earlier. This
+         can happen, for example, if there is a mismatch in VTP
+         passwords between the VTP devices." 
+    ::= { vtpStatsEntry 8 }
+ 
+
+-- Trunk Ports
+
+vlanTrunkPorts  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 6 }
+
+
+vlanTrunkPortTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VlanTrunkPortEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table containing information on the local system's VLAN
+        trunk ports."
+    ::= { vlanTrunkPorts 1 }
+
+vlanTrunkPortEntry OBJECT-TYPE
+    SYNTAX          VlanTrunkPortEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about one trunk port."
+    INDEX           { vlanTrunkPortIfIndex } 
+    ::= { vlanTrunkPortTable 1 }
+
+VlanTrunkPortEntry ::= SEQUENCE {
+        vlanTrunkPortIfIndex               InterfaceIndex,
+        vlanTrunkPortManagementDomain      ManagementDomainIndex,
+        vlanTrunkPortEncapsulationType     INTEGER,
+        vlanTrunkPortVlansEnabled          OCTET STRING,
+        vlanTrunkPortNativeVlan            VlanIndex,
+        vlanTrunkPortRowStatus             RowStatus,
+        vlanTrunkPortInJoins               Counter32,
+        vlanTrunkPortOutJoins              Counter32,
+        vlanTrunkPortOldAdverts            Counter32,
+        vlanTrunkPortVlansPruningEligible  OCTET STRING,
+        vlanTrunkPortVlansXmitJoined       OCTET STRING,
+        vlanTrunkPortVlansRcvJoined        OCTET STRING,
+        vlanTrunkPortDynamicState          INTEGER,
+        vlanTrunkPortDynamicStatus         INTEGER,
+        vlanTrunkPortVtpEnabled            TruthValue,
+        vlanTrunkPortEncapsulationOperType INTEGER,
+        vlanTrunkPortVlansEnabled2k        OCTET STRING,
+        vlanTrunkPortVlansEnabled3k        OCTET STRING,
+        vlanTrunkPortVlansEnabled4k        OCTET STRING,
+        vtpVlansPruningEligible2k          OCTET STRING,
+        vtpVlansPruningEligible3k          OCTET STRING,
+        vtpVlansPruningEligible4k          OCTET STRING,
+        vlanTrunkPortVlansXmitJoined2k     OCTET STRING,
+        vlanTrunkPortVlansXmitJoined3k     OCTET STRING,
+        vlanTrunkPortVlansXmitJoined4k     OCTET STRING,
+        vlanTrunkPortVlansRcvJoined2k      OCTET STRING,
+        vlanTrunkPortVlansRcvJoined3k      OCTET STRING,
+        vlanTrunkPortVlansRcvJoined4k      OCTET STRING,
+        vlanTrunkPortDot1qTunnel           INTEGER,
+        vlanTrunkPortVlansActiveFirst2k    Cisco2KVlanList,
+        vlanTrunkPortVlansActiveSecond2k   Cisco2KVlanList
+}
+
+vlanTrunkPortIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndex
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The value of ifIndex for the interface corresponding to
+        this trunk port." 
+    ::= { vlanTrunkPortEntry 1 }
+
+vlanTrunkPortManagementDomain OBJECT-TYPE
+    SYNTAX          ManagementDomainIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The value of managementDomainIndex for the management
+        domain on this trunk port.  Devices which support only one
+        management domain will support this object read-only." 
+    ::= { vlanTrunkPortEntry 2 }
+
+vlanTrunkPortEncapsulationType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        isl(1),
+                        dot10(2),
+                        lane(3),
+                        dot1Q(4),
+                        negotiate(5)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The type of VLAN encapsulation desired to be used on this
+        trunk port. It is either a particular type, or 'negotiate'
+        meaning whatever type results from the negotiation.
+        negotiate(5) is not allowed if the port does not support
+        negotiation or if its vlanTrunkPortDynamicState is set to
+        on(1) or onNoNegotiate(5). Whether writing to this object
+        in order to modify the encapsulation is supported is both
+        device and interface specific." 
+    ::= { vlanTrunkPortEntry 3 }
+
+vlanTrunkPortVlansEnabled OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN in the
+        management domain on this trunk port.  The first octet
+        corresponds to VLANs with VlanIndex values of 0 through 7;
+        the second octet to VLANs 8 through 15; etc.  The most
+        significant bit of each octet corresponds to the lowest
+        value VlanIndex in that octet.  If the bit corresponding to
+        a VLAN is set to '1', then the local system is enabled for
+        sending and receiving frames on that VLAN; if the bit is set
+        to '0', then the system is disabled from sending and
+        receiving frames on that VLAN.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 4 }
+
+vlanTrunkPortNativeVlan OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The VlanIndex of the VLAN which is represented by native
+        frames on this trunk port.  For trunk ports not supporting
+        the sending and receiving of native frames, this value
+        should be set to zero." 
+    ::= { vlanTrunkPortEntry 5 }
+
+vlanTrunkPortRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The status of this row.  In some circumstances, the
+        creation of a row in this table is needed to enable the
+        appropriate trunking/tagging protocol on the port, to enable
+        the use of VTP on the port, and to assign the port to the
+        appropriate management domain.  In other circumstances, rows
+        in this table will be created as a by-product of other
+        operations." 
+    ::= { vlanTrunkPortEntry 6 }
+
+vlanTrunkPortInJoins OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of VTP Join messages received on this trunk
+        port." 
+    ::= { vlanTrunkPortEntry 7 }
+
+vlanTrunkPortOutJoins OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of VTP Join messages sent on this trunk port." 
+    ::= { vlanTrunkPortEntry 8 }
+
+vlanTrunkPortOldAdverts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of VTP Advertisement messages which indicated
+        the sender does not support VLAN-pruning received on this
+        trunk port." 
+    ::= { vlanTrunkPortEntry 9 }
+
+vlanTrunkPortVlansPruningEligible OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN in the
+        management domain on this trunk port.  The first octet
+        corresponds to VLANs with VlanIndex values of 0 through 7;
+        the second octet to VLANs 8 through 15; etc.  The most
+        significant bit of each octet corresponds to the lowest
+        value VlanIndex in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local system is permitted to prune that VLAN on this trunk
+        port; if the bit is set to '0', then the system must not
+        prune that VLAN on this trunk port.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 10 }
+
+vlanTrunkPortVlansXmitJoined OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN in the
+        management domain on this trunk port.  The first octet
+        corresponds to VLANs with VlanIndex values of 0 through 7;
+        the second octet to VLANs 8 through 15; etc.  The most
+        significant bit of each octet corresponds to the lowest
+        value VlanIndex in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then this
+        VLAN is presently being forwarded on this trunk port, i.e.,
+        it is not pruned; if the bit is set to '0', then this VLAN
+        is presently not being forwarded on this trunk port, either
+        because it is pruned or for some other reason." 
+    ::= { vlanTrunkPortEntry 11 }
+
+vlanTrunkPortVlansRcvJoined OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN in the
+        management domain on this trunk port.  The first octet
+        corresponds to VLANs with VlanIndex values of 0 through 7;
+        the second octet to VLANs 8 through 15; etc.  The most
+        significant bit of each octet corresponds to the lowest
+        value VlanIndex in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local switch is currently sending joins for this VLAN on
+        this trunk port, i.e., it is asking to receive frames for
+        this VLAN; if the bit is set to '0', then the local switch
+        is not currently sending joins for this VLAN on this trunk
+        port." 
+    ::= { vlanTrunkPortEntry 12 }
+
+vlanTrunkPortDynamicState OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        on(1),
+                        off(2),
+                        desirable(3),
+                        auto(4),
+                        onNoNegotiate(5)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "For devices that allows dynamic determination of whether
+        a link between two switches should be a trunk or not, this
+        object allows the operator to mandate the behavior of that
+        dynamic mechanism.
+
+        on(1) dictates that the interface will always be a
+        trunk. This is the value for static entries (those that
+        show no dynamic behavior). If the negotiation is supported
+        on this port, negotiation will take place with the far end
+        to attempt to bring the far end into trunking state.
+
+        off(2) allows an operator to specify that the specified
+        interface is never to be trunk, regardless of any dynamic
+        mechanisms to the contrary.  This value is useful for
+        overriding the default behavior of some switches. If the
+        negotiation is supported on this port, negotiation will take
+        place with the far end to attempt on the link to bring the
+        far end into non-trunking state.
+
+        desirable(3) is used to indicate that it is desirable for
+        the interface to become a trunk.  The device will initiate
+        any negotiation necessary to become a trunk but will not
+        become a trunk unless it receives confirmation from the far
+        end on the link.
+
+        auto(4) is used to indicate that the interface is capable
+        and willing to become a trunk but will not initiate
+        trunking negotiations.  The far end on the link are
+        required to either start negotiations or start sending
+        encapsulated packets, on which event the specified
+        interface will become a trunk.
+
+        onNoNegotiate(5) is used to indicate that the interface is
+        permanently set to be a trunk, and no negotiation takes
+        place with the far end on the link to ensure consistent
+        operation. This is similar to on(1) except no negotiation
+        takes place with the far end.
+
+        If the port does not support negotiation or its
+        vlanTrunkPortEncapsulationType is set to negotiate(5),
+        onNoNegotiate(5) is not allowed.
+
+        Devices that do no support dynamic determination (for just
+        a particular interface, encapsulation or for the whole
+        device) need only support the 'on', and 'off' values." 
+    ::= { vlanTrunkPortEntry 13 }
+
+vlanTrunkPortDynamicStatus OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        trunking(1),
+                        notTrunking(2)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates whether the specified interface is either
+        acting as a trunk or not. This is a result of the
+        vlanTrunkPortDynamicState and the ifOperStatus of the
+        trunk port itself." 
+    ::= { vlanTrunkPortEntry 14 }
+
+vlanTrunkPortVtpEnabled OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Some trunk interface modules allow VTP to be
+        enabled/disabled seperately from that of the central
+        device.  In such a case this object provides management a
+        way to remotely enable VTP on that module.  If a module
+        does not support a seperate VTP enabled state then this
+        object shall always return 'true' and will accept no other
+        value during a SET operation." 
+    ::= { vlanTrunkPortEntry 15 }
+
+vlanTrunkPortEncapsulationOperType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        isl(1),
+                        dot10(2),
+                        lane(3),
+                        dot1Q(4),
+                        negotiating(5),
+                        notApplicable(6)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The type of VLAN encapsulation in use on this trunk port.
+        For intefaces with vlanTrunkPortDynamicStatus of
+        notTrunking(2) the vlanTrunkPortEncapsulationOperType shall
+        be notApplicable(6)." 
+    ::= { vlanTrunkPortEntry 16 }
+
+vlanTrunkPortVlansEnabled2k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 1024 through 2047 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 1024 through 1031; the second
+        octet to VLANs 1032 through 1039; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet. If the bit corresponding to a VLAN is set to
+        '1', then the local system is enabled for sending and
+        receiving frames on that VLAN; if the bit is set to '0',
+        then the system is disabled from sending and receiving
+        frames on that VLAN. The default value is zero length
+        string.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 17 }
+
+vlanTrunkPortVlansEnabled3k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 2048 through 3071 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 2048 through 2055; the second
+        octet to VLANs 2056 through 2063; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet. If the bit corresponding to a VLAN is set to
+        '1', then the local system is enabled for sending and
+        receiving frames on that VLAN; if the bit is set to '0',
+        then the system is disabled from sending and receiving
+        frames on that VLAN. The default value is zero length
+        string.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 18 }
+
+vlanTrunkPortVlansEnabled4k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 3072 through 4095 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 3072 through 3079; the second
+        octet to VLANs 3080 through 3087; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet. If the bit corresponding to a VLAN is set to
+        '1', then the local system is enabled for sending and
+        receiving frames on that VLAN; if the bit is set to '0',
+        then the system is disabled from sending and receiving
+        frames on that VLAN. The default value is zero length
+        string.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 19 }
+
+vtpVlansPruningEligible2k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 1024 through 2047 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 1024 through 1031; the second
+        octet to VLANs 1032 through 1039; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local system is permitted to prune that VLAN on this trunk
+        port; if the bit is set to '0', then the system must not
+        prune that VLAN on this trunk port.
+        The default value is zero length string.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 20 }
+
+vtpVlansPruningEligible3k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 2048 through 3071 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 2048 through 2055; the second
+        octet to VLANs 2056 through 2063; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local system is permitted to prune that VLAN on this trunk
+        port; if the bit is set to '0', then the system must not
+        prune that VLAN on this trunk port.
+        The default value is zero length string.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 21 }
+
+vtpVlansPruningEligible4k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 3072 through 4095 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 3072 through 3079; the second
+        octet to VLANs 3080 through 3087; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local system is permitted to prune that VLAN on this trunk
+        port; if the bit is set to '0', then the system must not
+        prune that VLAN on this trunk port.
+        The default value is zero length string.
+
+        To avoid conflicts between overlapping partial updates by
+        multiple managers, i.e., updates which modify only a portion
+        of an instance of this object (e.g., enable/disable a single
+        VLAN on the trunk port), any SNMP Set operation accessing an
+        instance of this object should also write the value of
+        vlanTrunkPortSetSerialNo." 
+    ::= { vlanTrunkPortEntry 22 }
+
+vlanTrunkPortVlansXmitJoined2k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 1024 through 2047 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 1024 through 1031; the second
+        octet to VLANs 1032 through 1039; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then this
+        VLAN is presently being forwarded on this trunk port, i.e.,
+        it is not pruned; if the bit is set to '0', then this VLAN
+        is presently not being forwarded on this trunk port, either
+        because it is pruned or for some other reason." 
+    ::= { vlanTrunkPortEntry 23 }
+
+vlanTrunkPortVlansXmitJoined3k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 2048 through 3071 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 2048 through 2055; the second
+        octet to VLANs 2056 through 2063; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then this
+        VLAN is presently being forwarded on this trunk port, i.e.,
+        it is not pruned; if the bit is set to '0', then this VLAN
+        is presently not being forwarded on this trunk port, either
+        because it is pruned or for some other reason." 
+    ::= { vlanTrunkPortEntry 24 }
+
+vlanTrunkPortVlansXmitJoined4k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 3072 through 4095 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 3072 through 3079; the second
+        octet to VLANs 3080 through 3087; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then this
+        VLAN is presently being forwarded on this trunk port, i.e.,
+        it is not pruned; if the bit is set to '0', then this VLAN
+        is presently not being forwarded on this trunk port, either
+        because it is pruned or for some other reason." 
+    ::= { vlanTrunkPortEntry 25 }
+
+vlanTrunkPortVlansRcvJoined2k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 1024 through 2047 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 1024 through 1031; the second
+        octet to VLANs 1032 through 1039; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local switch is currently sending joins for this VLAN on
+        this trunk port, i.e., it is asking to receive frames for
+        this VLAN; if the bit is set to '0', then the local switch
+        is not currently sending joins for this VLAN on this trunk
+        port." 
+    ::= { vlanTrunkPortEntry 26 }
+
+vlanTrunkPortVlansRcvJoined3k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 2048 through 3071 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 2048 through 2055; the second
+        octet to VLANs 2056 through 2063; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local switch is currently sending joins for this VLAN on
+        this trunk port, i.e., it is asking to receive frames for
+        this VLAN; if the bit is set to '0', then the local switch
+        is not currently sending joins for this VLAN on this trunk
+        port." 
+    ::= { vlanTrunkPortEntry 27 }
+
+vlanTrunkPortVlansRcvJoined4k OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0..128))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN for VLANS
+        with VlanIndex values of 3072 through 4095 in the management
+        domain on this trunk port.  The first octet corresponds to
+        VLANs with VlanIndex values of 3072 through 3079; the second
+        octet to VLANs 3080 through 3087; etc.  The most significant
+        bit of each octet corresponds to the lowest value VlanIndex
+        in that octet.
+
+        If the bit corresponding to a VLAN is set to '1', then the
+        local switch is currently sending joins for this VLAN on
+        this trunk port, i.e., it is asking to receive frames for
+        this VLAN; if the bit is set to '0', then the local switch
+        is not currently sending joins for this VLAN on this trunk
+        port." 
+    ::= { vlanTrunkPortEntry 28 }
+
+vlanTrunkPortDot1qTunnel OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        trunk(1),
+                        access(2),
+                        disabled(3)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          deprecated
+    DESCRIPTION
+        "Indicates dot1qtunnel mode of the port.
+
+        If the portDot1qTunnel  is set to 'trunk' mode, the port's
+        vlanTrunkPortDynamicState will be changed to 'onNoNegotiate'
+        and the vlanTrunkPortEncapsulationType will be set to
+        'dot1Q'. These values cannot be changed unless dot1q tunnel
+        is disabled on this port.
+
+        If the portDot1qTunnel mode is set to 'access' mode, the
+        port's vlanTrunkPortDynamicState will be set to 'off'.And
+        the value of vlanTrunkPortDynamicState cannot be changed
+        unless dot1q tunnel is disabled on this port. 1Q packets
+        received on this access port will remain.
+
+        Setting the port to dot1q tunnel 'disabled' mode causes the
+        dot1q tunnel feature to be disabled on this port.  This
+        object can't be set to 'trunk' or 'access' mode, when
+        vlanTrunkPortsDot1qTag  object is set to 'false'.
+
+        This object has been deprecated and is replaced by the
+        object 'cltcDot1qTunnelMode' in the
+        CISCO-L2-TUNNEL-CONFIG-MIB"
+    DEFVAL          { disabled } 
+    ::= { vlanTrunkPortEntry 29 }
+
+vlanTrunkPortVlansActiveFirst2k OBJECT-TYPE
+    SYNTAX          Cisco2KVlanList
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN
+        with VlanIndex values of 0 through 2047.
+
+        If the bit corresponding to a VLAN is set to 1,
+        it indicates that vlan is allowed and active in
+        management domain.
+
+        If the bit corresponding to a VLAN is set to 0,
+        it indicates that vlan is not allowed or not active
+        in management domain." 
+    ::= { vlanTrunkPortEntry 30 }
+
+vlanTrunkPortVlansActiveSecond2k OBJECT-TYPE
+    SYNTAX          Cisco2KVlanList
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A string of octets containing one bit per VLAN
+        with VlanIndex values of 2048 through 4095.
+
+        If the bit corresponding to a VLAN is set to 1,
+        it indicates that vlan is allowed and active in
+        management domain.
+
+        If the bit corresponding to a VLAN is set to 0,
+        it indicates that vlan is not allowed or not active
+        in management domain." 
+    ::= { vlanTrunkPortEntry 31 }
+ 
+
+
+vlanTrunkPortSetSerialNo OBJECT-TYPE
+    SYNTAX          TestAndIncr
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "An advisory lock used to allow several cooperating SNMPv2
+        managers to coordinate their use of the SNMPv2 set operation
+        acting upon any instance of vlanTrunkPortVlansEnabled." 
+    ::= { vlanTrunkPorts 2 }
+
+vlanTrunkPortsDot1qTag OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          deprecated
+    DESCRIPTION
+        "An indication of whether the tagging on all VLANs including
+        native VLAN for all 802.1q trunks is enabled.
+
+        If this object has a value of true(1) then all VLANs
+        including native VLAN are tagged.  If the value is false(2)
+        then all VLANs excluding native VLAN are tagged.
+
+        This object has been deprecated and is replaced by the
+        object 'cltcDot1qAllTaggedEnabled' in the
+        CISCO-L2-TUNNEL-CONFIG-MIB"
+    DEFVAL          { false } 
+    ::= { vlanTrunkPorts 3 }
+vtpDiscover  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 7 }
+
+
+vtpDiscoverTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpDiscoverEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information related to the discovery
+        of the VTP members in the designated management
+        domain. This table is not instantiated when 
+        managementDomainVersionInUse is version1(1), version2(3)
+        or none(3)."
+    ::= { vtpDiscover 1 }
+
+vtpDiscoverEntry OBJECT-TYPE
+    SYNTAX          VtpDiscoverEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information related to the discovery of the
+        VTP members in one management domain."
+    INDEX           { managementDomainIndex } 
+    ::= { vtpDiscoverTable 1 }
+
+VtpDiscoverEntry ::= SEQUENCE {
+        vtpDiscoverAction   INTEGER,
+        vtpDiscoverStatus   INTEGER,
+        vtpLastDiscoverTime TimeStamp
+}
+
+vtpDiscoverAction OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        discover(1),
+                        noOperation(2),
+                        purgeResult(3)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "When this object is set to discover(1), all the
+        entries in vtpDiscoverResultTable for the
+        corresponding management domain will be removed 
+        and the local device will begin to discover all
+        VTP members in the management domain. Upon the
+        successful completion of discovery, the discovered
+        result will be stored in the vtpDiscoverResultTable.
+
+        If vtpDiscoverStatus is inProgress(1), setting 
+        vtpDiscoverAction to discover(1) will fail. 
+
+        When this object is set to purgeResult(3), 
+        all the entries of vtpDiscoverResultTable for 
+        the corresponding management domain will be
+        removed from vtpDiscoverResultTable.
+
+        When this object is set to noOperation(2), no
+        action will be taken. When read, this object
+        always returns noOperation(2)." 
+    ::= { vtpDiscoverEntry 1 }
+
+vtpDiscoverStatus OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        inProgress(1),
+                        succeeded(2),
+                        resourceUnavailable(3),
+                        someOtherError(4)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current status of VTP discovery.
+
+        inProgress - a discovery is in progress;
+
+        succeeded - the discovery was completed successfully
+                    (this value is also used when 
+                    no discover has been invoked since the
+                    last time the local system restarted);
+
+        resourceUnavailable - the discovery failed because
+                    the required allocation of a resource is
+                    presently unavailable.
+
+        someOtherError - 'the discovery failed due to a
+                    reason no listed." 
+    ::= { vtpDiscoverEntry 2 }
+
+vtpLastDiscoverTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The value of sysUpTime at which the last discovery
+        was completed.
+
+        A value of zero indicates that no discovery has been
+        invoked since last time the local system restarted." 
+    ::= { vtpDiscoverEntry 3 }
+ 
+
+
+vtpDiscoverResultTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpDiscoverResultEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table containing information of discovered VTP members
+        in the management domain in which the local system is
+        participating. This table is not instantiated when 
+        managementDomainVersionInUse is version1(1), version2(2) or
+        none(3)."
+    ::= { vtpDiscover 2 }
+
+vtpDiscoverResultEntry OBJECT-TYPE
+    SYNTAX          VtpDiscoverResultEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A conceptual row is created for each VTP member which
+        is found through successful discovery."
+    INDEX           {
+                        managementDomainIndex,
+                        vtpDiscoverResultIndex
+                    } 
+    ::= { vtpDiscoverResultTable 1 }
+
+VtpDiscoverResultEntry ::= SEQUENCE {
+        vtpDiscoverResultIndex         Unsigned32,
+        vtpDiscoverResultDatabaseName  SnmpAdminString,
+        vtpDiscoverResultConflicting   TruthValue,
+        vtpDiscoverResultDeviceId      SnmpAdminString,
+        vtpDiscoverResultPrimaryServer SnmpAdminString,
+        vtpDiscoverResultRevNumber     Gauge32,
+        vtpDiscoverResultSystemName    SnmpAdminString
+}
+
+vtpDiscoverResultIndex OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A value assigned by the system which identifies
+        a VTP member and the associated database in the 
+        management domain." 
+    ::= { vtpDiscoverResultEntry 1 }
+
+vtpDiscoverResultDatabaseName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The database name associated with the
+        discovered VTP member." 
+    ::= { vtpDiscoverResultEntry 2 }
+
+vtpDiscoverResultConflicting OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates whether this VTP member contains
+        conflicting information.
+
+        true(1) indicates that this member has conflicting 
+        information of the database type in the management domain.
+
+        false(2) indicates that there is no conflicting information
+        of the database type in the management domain." 
+    ::= { vtpDiscoverResultEntry 3 }
+
+vtpDiscoverResultDeviceId OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The unique identifier of the device for this VTP member." 
+    ::= { vtpDiscoverResultEntry 4 }
+
+vtpDiscoverResultPrimaryServer OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The unique identifier of the primary server for this VTP
+        member and the associated database type.
+
+        There are two different VTP servers, the primary server
+        and the secondary server.  When a local device is
+        configured as a server for a certain database type,
+        it becomes secondary server by default. 
+        Primary server is an operational role under which a
+        server can initiate or change the VTP configuration of the
+        database type.
+
+        If this VTP member itself is the primary server, the   
+        value of this object is the same as the value of 
+        vtpDiscoverResultDeviceId of the instance." 
+    ::= { vtpDiscoverResultEntry 5 }
+
+vtpDiscoverResultRevNumber OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current configuration revision number as known by the
+        VTP member. When the database type is unknown for
+        the VTP member, this value is 0." 
+    ::= { vtpDiscoverResultEntry 6 }
+
+vtpDiscoverResultSystemName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "sysName of the VTP member." 
+    ::= { vtpDiscoverResultEntry 7 }
+ 
+
+vtpDatabase  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 8 }
+
+
+vtpDatabaseTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpDatabaseEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table contains information of the VTP
+        databases. It is not instantiated when
+        managementDomainVersionInUse is version1(1), 
+        version2(3) or none(3)."
+    ::= { vtpDatabase 1 }
+
+vtpDatabaseEntry OBJECT-TYPE
+    SYNTAX          VtpDatabaseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about the status of the VTP database
+        in the domain.  Each VTP database type known to the
+        local device type has an entry in this table.
+        An entry is also created for unknown database which is
+        notified through VTP advertisements from other VTP
+        servers."
+    INDEX           {
+                        managementDomainIndex,
+                        vtpDatabaseIndex
+                    } 
+    ::= { vtpDatabaseTable 1 }
+
+VtpDatabaseEntry ::= SEQUENCE {
+        vtpDatabaseIndex            Unsigned32,
+        vtpDatabaseName             SnmpAdminString,
+        vtpDatabaseLocalMode        INTEGER,
+        vtpDatabaseRevNumber        Gauge32,
+        vtpDatabasePrimaryServer    TruthValue,
+        vtpDatabasePrimaryServerId  SnmpAdminString,
+        vtpDatabaseTakeOverPrimary  TruthValue,
+        vtpDatabaseTakeOverPassword SnmpAdminString
+}
+
+vtpDatabaseIndex OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A value assigned by the system which uniquely identifies
+        a VTP database in the local system." 
+    ::= { vtpDatabaseEntry 1 }
+
+vtpDatabaseName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The name of the database." 
+    ::= { vtpDatabaseEntry 2 }
+
+vtpDatabaseLocalMode OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3),
+                        off(4)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The local VTP mode for a particular database type
+        in this administrative domain.
+
+        - 'client' indicates that the local system is acting
+          as a VTP client of the database type.
+
+        - 'server' indicates that the local system is acting
+          as a VTP server of the database type.
+
+        - 'transparent' indicates that the local system does
+          not generate or listen to VTP messages of this 
+          database type, but forwards
+          messages. This mode can also be set by the device
+          itself when the size of database is too large for it
+          to hold in DRAM.
+
+        - 'off' indicates that the local system does not
+          generate, listen to or forward any VTP messages
+          of this database type.
+
+        The default mode is 'client' for the database type 
+        known to the local device and 'transparent' for the
+        unknown database type." 
+    ::= { vtpDatabaseEntry 3 }
+
+vtpDatabaseRevNumber OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current configuration revision number as known by the
+        local device for this VTP 3 database type in the management
+        domain.  This value is updated (if necessary) whenever a 
+        VTP advertisement for the database type is received 
+        or generated. When the database type is unknown to the 
+        local device or no VTP advertisement for the database
+        type is received or generated, its value is 0." 
+    ::= { vtpDatabaseEntry 4 }
+
+vtpDatabasePrimaryServer OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "There are two kinds of VTP version 3 servers for a certain
+        database type - the primary server and the secondary server.
+        When a local device is configured as a server for a certain
+        database type, it becomes secondary server by default.
+        Primary server is an operational role under which a
+        server can initiate or change the VTP configuration of the
+        database type.
+
+        A true(1) value indicates that the local device is the 
+        primary server of the database type in the management
+        domain. A false(2) value indicates that the local device
+        is not the primary server, or the database type is unknown
+        to the local device." 
+    ::= { vtpDatabaseEntry 5 }
+
+vtpDatabasePrimaryServerId OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The unique identifier of the primary server in the
+        management domain for the database type. 
+
+        If no primary server is discovered for the database
+        type, the object has a value of zero length string." 
+    ::= { vtpDatabaseEntry 6 }
+
+vtpDatabaseTakeOverPrimary OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "There are two kinds of VTP version 3 servers for a certain
+        database type - the primary server and the secondary server.
+        When a local device is configured as a server for a certain
+        database type, it becomes secondary server by default.
+        Primary server is an operational role under which a
+        server can initiate or change the VTP configuration of the
+        database type.
+
+        Setting this object to a true(1) value will advertise the
+        configuration of this database type to the whole domain.
+
+        In order to successfully setting this object to true(1),
+        the value of vtpDatabaseLocalMode must be server(2). Besides
+        that, when the VTP password is hidden from the configuration
+        file, the password (vtpDatabaseTakeOverPassword) which 
+        matches  the secret key (vtpAuthSecretKey) must be provided
+        in the same data packet. 
+
+        When read, the object always returns false(2)." 
+    ::= { vtpDatabaseEntry 7 }
+
+vtpDatabaseTakeOverPassword OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "When read, this object always returns the value of a
+        zero-length octet string.
+
+        In the case that the VTP password is hidden from the 
+        configuration and the local device intends
+        to take over the whole domain, this object must be 
+        set to the matching password with the secret key 
+        (vtpAuthSecretKey) in the same data packet as which 
+        the vtpDatabaseTakeOverPrimary is in. In all the 
+        other situations, setting a valid value to this object 
+        has no impact on the system." 
+    ::= { vtpDatabaseEntry 8 }
+ 
+
+vtpAuthentication  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 9 }
+
+
+vtpAuthenticationTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF VtpAuthEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table contains the authentication information of VTP
+        in which the local system participates.
+
+        The security mechanism of VTP relies on a secret key
+        that is used to alter the MD5 digest of the packets
+        transmitted on the wire.  The secret value is
+        created from a password that may be saved in plain text
+        in the configuration or hidden from the configuration.
+
+        The device creating or modifying the VTP configuration
+        signs it using the MD5 digest generated from the secret
+        key before advertising it. Other devices in the domain
+        receive this configuration use the same secret key
+        to accept it if correctly signed or drop it otherwise.
+
+        The user has the option to hide the password from the
+        configuration. Once the password is hidden, the secret
+        key generated from the password is shown in the 
+        configuration instead, and there is no other way to 
+        show the password in plain text again but clearing 
+        it or resetting it. 
+
+        In an un-trusted area, the password on a device can 
+        be configured without being unveiled. After that,
+        it has to be provided again by setting the same 
+        value to vtpDatabaseTakeOverPassword if the user 
+        wants to take over the whole VTP management domain
+        of the database type.
+
+        When managementDomainVersionInUse is version3(4), the 
+        authentication mechanism is common to all VTP
+        database type."
+    ::= { vtpAuthentication 1 }
+
+vtpAuthEntry OBJECT-TYPE
+    SYNTAX          VtpAuthEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information about the status of the VTP
+        authentication information in one domain."
+    INDEX           { managementDomainIndex } 
+    ::= { vtpAuthenticationTable 1 }
+
+VtpAuthEntry ::= SEQUENCE {
+        vtpAuthPassword     SnmpAdminString,
+        vtpAuthPasswordType INTEGER,
+        vtpAuthSecretKey    OCTET STRING
+}
+
+vtpAuthPassword OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "By default, this object has a value of a zero-length
+        character string and is considered to be not
+        configured.
+
+        The device uses the password to generate the 
+        secret key. It can be stored in the configuration in 
+        plain text or hidden from the configuration. If a VTP 
+        server intends to modify the database's configuration
+        in the domain but the password was hidden from the
+        configuration, the same password
+        (vtpDatabaseTakeOverPassword) as the hidden one
+        has to be provided.
+
+        When this object is set alone, vtpAuthPasswordType is
+        set to plaintext(1) automatically by the system.
+        Setting this object to a zero length character string
+        resets the password to its default value and the
+        password is considered as not configured.
+
+        This object is not allowed to be set at the same time
+        when  vtpAuthSecretKey is set.
+
+        When the vtpAuthPasswordType is hidden(2), this object 
+        will return a zero-length character string when read." 
+    ::= { vtpAuthEntry 1 }
+
+vtpAuthPasswordType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        plaintext(1),
+                        hidden(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "By default this object has the value as plaintext(1)
+        and the VTP password is stored in the configuration
+        file in plain text.
+
+        Setting this object to hidden(2) will hide the
+        password from the configuration.
+
+        Once this object is set to hidden(2), it cannot
+        be set to plaintext(1) alone. However, it may
+        be set to plaintext(1) at the same time the
+        password is set." 
+    ::= { vtpAuthEntry 2 }
+
+vtpAuthSecretKey OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (0 | 16))
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The device creating or modifying the VTP configuration
+        signs it using the MD5 digest generated from the secret
+        key before advertising it. Other devices in the domain
+        receiving this configuration use the same secret key
+        to accept it if it was correctly signed or drop it 
+        otherwise.
+
+        By default, the object has the value as a zero-length
+        string and this value is read only. It is set 
+        to this value automatically when the password 
+        (vtpAuthPassword) is set to a zero-length octet string.
+
+        The secret key can be either generated using
+        the password or configured by the user. Once
+        the secret key is configured by the user, it is
+        stored as a hexadecimal string in the device's
+        configuration and the password is considered to be
+        the secret key's matching password and hidden
+        from the configuration automatically.
+
+        This object is not allowed to be set at the same
+        time when vtpAuthPassword is set.
+
+        The secret key is overwritten by a newly generated
+        secret key when the password is re-configured." 
+    ::= { vtpAuthEntry 3 }
+ 
+
+vlanStatistics  OBJECT IDENTIFIER
+    ::= { vtpMIBObjects 10 }
+
+
+vlanStatsVlans OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the number of the existing
+        manageable VLANs with VLAN indices from 1 to
+        1024 in the system." 
+    ::= { vlanStatistics 1 }
+
+vlanStatsExtendedVlans OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the number of the
+        existing manageable VLANs with VLAN indices
+        greater than 1024 in the system." 
+    ::= { vlanStatistics 2 }
+
+vlanStatsInternalVlans OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the number of the
+        internal VLANs existing in the system." 
+    ::= { vlanStatistics 3 }
+
+vlanStatsFreeVlans OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the number of the
+        free or unused VLANs in the system." 
+    ::= { vlanStatistics 4 }
+-- VTP notifications
+
+vtpNotifications  OBJECT IDENTIFIER
+    ::= { ciscoVtpMIB 2 }
+
+vtpNotificationsPrefix  OBJECT IDENTIFIER
+    ::= { vtpNotifications 0 }
+
+vtpNotificationsObjects  OBJECT IDENTIFIER
+    ::= { vtpNotifications 1 }
+
+
+vtpConfigRevNumberError NOTIFICATION-TYPE
+    OBJECTS         { managementDomainConfigRevNumber }
+    STATUS          current
+    DESCRIPTION
+        "A configuration revision number error notification
+        signifies that a device has incremented its
+        vtpConfigRevNumberErrors counter.
+
+        Generation of this notification is suppressed if the
+        vtpNotificationsEnabled has the value 'false'.
+
+        The device must throttle the generation of consecutive
+        vtpConfigRevNumberError notifications so that there is at
+        least a five-second gap between notification of this type.
+        When notification are throttled, they are dropped, not
+        queued for sending at a future time.  (Note that
+        'generating' a notification means sending to all configured
+        recipients.)"
+   ::= { vtpNotificationsPrefix 1 }
+
+vtpConfigDigestError NOTIFICATION-TYPE
+    OBJECTS         { managementDomainConfigRevNumber }
+    STATUS          current
+    DESCRIPTION
+        "A configuration digest error notification signifies that a
+        device has incremented its vtpConfigDigestErrors counter.
+
+        Generation of this notification is suppressed if the
+        vtpNotificationsEnabled has the value 'false'.
+
+        The device must throttle the generation of consecutive
+        vtpConfigDigestError notifications so that there is at least
+        a five-second gap between notification of this type.  When
+        notification are throttled, they are dropped, not queued for
+        sending at a future time.  (Note that 'generating' a
+        notification means sending to all configured recipients.)"
+   ::= { vtpNotificationsPrefix 2 }
+
+vtpServerDisabled NOTIFICATION-TYPE
+    OBJECTS         {
+                        managementDomainConfigRevNumber,
+                        vtpMaxVlanStorage
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A VTP Server disabled notification is generated when the
+        local system is no longer able to function as a VTP Server
+        because the number of defined VLANs is greater than
+        vtpMaxVlanStorage or the local system is not able to
+        recover complete VTP information after a reboot.
+
+        Generation of this notification is suppressed if the
+        vtpNotificationsEnabled has the value 'false'."
+   ::= { vtpNotificationsPrefix 3 }
+
+vtpMtuTooBig NOTIFICATION-TYPE
+    OBJECTS         {
+                        vlanTrunkPortManagementDomain,
+                        vtpVlanState
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A VTP MTU tooBig notification is generated when a VLAN's
+        MTU size is larger than can be supported either:
+
+        - by one or more of its trunk ports:
+          the included vtpVlanState has the value
+          'mtuTooBigForTrunk' and the included
+          vlanTrunkPortManagementDomain is for the first (or only)
+          trunk port,
+          or
+
+        - by the device itself:
+          vtpVlanState has the value 'mtuTooBigForDevice' and any
+          instance of vlanTrunkPortManagementDomain is included.
+
+        Devices which have no trunk ports do not send vtpMtuTooBig
+        notifications.
+
+        Generation of this notification is suppressed if the
+        vtpNotificationsEnabled has the value 'false'."
+   ::= { vtpNotificationsPrefix 4 }
+
+vtpVersionOneDeviceDetected NOTIFICATION-TYPE
+    OBJECTS         { vlanTrunkPortManagementDomain }
+    STATUS          current
+    DESCRIPTION
+        "A VTP version one device detected notification is
+        generated by a device when:
+
+        a) a management domain has been put into version 2 mode
+           (as accessed by managementDomainVersionInUse).
+        b) 15 minutes has passed since a).
+        c) a version 1 PDU is detected on a trunk on the device
+           that is in that management domain which has a lower
+           revision number than the current configuration."
+   ::= { vtpNotificationsPrefix 6 }
+
+vlanTrunkPortDynamicStatusChange NOTIFICATION-TYPE
+    OBJECTS         { vlanTrunkPortDynamicStatus }
+    STATUS          current
+    DESCRIPTION
+        "A vlanTrunkPortDynamicStatusChange notification is
+        generated by a device when the value of
+        vlanTrunkPortDynamicStatus object has been changed."
+   ::= { vtpNotificationsPrefix 7 }
+
+vtpLocalModeChanged NOTIFICATION-TYPE
+    OBJECTS         { managementDomainLocalMode }
+    STATUS          current
+    DESCRIPTION
+        "A vtpLocalModeChanged notification is generated
+        by a device when the value of the object 
+        managementDomainLocalMode is changed."
+   ::= { vtpNotificationsPrefix 8 }
+
+vtpVersionInUseChanged NOTIFICATION-TYPE
+    OBJECTS         { managementDomainVersionInUse }
+    STATUS          current
+    DESCRIPTION
+        "A vtpVersionInUseChanged notification is
+        generated by a device when the value of the  
+        object managementDomainVersionInUse is 
+        changed."
+   ::= { vtpNotificationsPrefix 9 }
+
+vtpVlanCreated NOTIFICATION-TYPE
+    OBJECTS         { vtpVlanName }
+    STATUS          current
+    DESCRIPTION
+        "A vtpVlanCreated notification is generated by a
+        device when a VLAN is created."
+   ::= { vtpNotificationsPrefix 10 }
+
+vtpVlanDeleted NOTIFICATION-TYPE
+    OBJECTS         { vtpVlanName }
+    STATUS          current
+    DESCRIPTION
+        "A vtpVlanDeleted notification is generated by a
+        device when a VLAN is deleted."
+   ::= { vtpNotificationsPrefix 11 }
+
+vtpVlanRingNumberConflict NOTIFICATION-TYPE
+    OBJECTS         {
+                        vtpVlanRingNumber,
+                        ifIndex,
+                        vtpVlanPortLocalSegment
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A VTP ring number configuration conflict notification is
+        generated if, and only at the time when, a device learns of
+        a conflict between:
+
+        a) the ring number (vtpVlanPortLocalSegment) being used on a
+           token ring segment attached to the port identified by
+           ifIndex, and
+
+        b) the VTP-obtained ring number (vtpVlanRingNumber) for the
+           VLAN identified by vtpVlanIndex.
+
+        When such a conflict occurs, the bridge port is put into an
+        administrative down position until the conflict is resolved
+        through local/network management intervention.
+
+        This notification is only applicable to VLANs of type
+        'tokenRing'."
+   ::= { vtpNotificationsPrefix 12 }
+
+vtpPruningStateOperChange NOTIFICATION-TYPE
+    OBJECTS         { managementDomainPruningStateOper }
+    STATUS          current
+    DESCRIPTION
+        "A vtpPruningStateOperChange notification is generated
+        by the device when the instance value of
+        managementDomainPruningStateOper is changed."
+   ::= { vtpNotificationsPrefix 13 }
+
+vtpVlanPortLocalSegment OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "The ring (segment) number in use on a 802.5 ring.  For
+        bridges supporting RFC 1525, this value is the same as given
+        by dot1dSrPortLocalSegment for the bridge port attached to
+        that ring.  When tokenRing VLANs are in use, each 'trNet'
+        VLAN can/does have a different instance of
+        dot1dSrPortLocalSegment for each physical port.  Note that
+        access to the particuler instance of dot1dSrPortLocalSegment
+        requires knowledge of how the agent supports the multiple
+        'contexts' required to implement RFC 1525 for multiple
+        VLANs; also note that the assignment of ifIndex values may
+        be different in different 'contexts'." 
+    ::= { vtpNotificationsObjects 1 }
+-- Conformance Information
+
+vtpMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoVtpMIB 3 }
+
+vtpMIBCompliances  OBJECT IDENTIFIER
+    ::= { vtpMIBConformance 1 }
+
+vtpMIBGroups  OBJECT IDENTIFIER
+    ::= { vtpMIBConformance 2 }
+
+
+-- compliance statements
+
+vtpMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 1 }
+
+vtpMIBCompliance2 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroup
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 2 }
+
+vtpMIBCompliance3 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroup
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpDot1qTunnelGroup
+    DESCRIPTION
+        "This group is mandatory for all the ports which
+        implement dot1qtunnel feature."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDot1qTunnel
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only for interface which doesn't
+        support dot1q tunnel feature."
+    ::= { vtpMIBCompliances 3 }
+
+vtpMIBCompliance4 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroup
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpDot1qTunnelGroup
+    DESCRIPTION
+        "This group is mandatory for all the ports which
+        implement dot1qtunnel feature."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDot1qTunnel
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only for interface which doesn't
+        support dot1q tunnel feature."
+    ::= { vtpMIBCompliances 4 }
+
+vtpMIBCompliance5 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroup
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpDot1qTunnelGroup
+    DESCRIPTION
+        "This group is mandatory for all the ports which
+        implement dot1qtunnel feature."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDot1qTunnel
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only for interface which doesn't
+        support dot1q tunnel feature."
+    ::= { vtpMIBCompliances 5 }
+
+vtpMIBCompliance6 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpDot1qTunnelGroup
+    DESCRIPTION
+        "This group is mandatory for all the ports which
+        implement dot1qtunnel feature."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDot1qTunnel
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only for interface which doesn't
+        support dot1q tunnel feature."
+    ::= { vtpMIBCompliances 6 }
+
+vtpMIBCompliance7 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpDot1qTunnelGroup
+    DESCRIPTION
+        "This group is mandatory for all the ports which
+        implement dot1qtunnel feature."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3). Write access for transparent(3)
+        is not required."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDot1qTunnel
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only for interface which doesn't
+        support dot1q tunnel feature."
+    ::= { vtpMIBCompliances 7 }
+
+vtpMIBCompliance8 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpDot1qTunnelGroup2
+    DESCRIPTION
+        "This group is mandatory for all the ports which
+        implement dot1qtunnel feature."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3). Write access for transparent(3)
+        is not required."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 8 }
+
+vtpMIBCompliance9 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3). Write access for transparent(3)
+        is not required."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 9 }
+
+vtpMIBCompliance10 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroup,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    GROUP           vtpDiscoverGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP discovery."
+
+    GROUP           vtpDatabaseGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP distribution of different database types."
+
+    GROUP           vtpAuthGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support
+        asymmetric keys authentication mechanism for VTP."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 10 }
+
+vtpMIBCompliance11 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroupRev1,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    GROUP           vtpDiscoverGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP discovery."
+
+    GROUP           vtpDatabaseGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP distribution of different database types."
+
+    GROUP           vtpAuthGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support
+        asymmetric keys authentication mechanism for VTP."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 11 }
+
+vtpMIBCompliance12 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroupRev1,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    GROUP           vtpDiscoverGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP discovery."
+
+    GROUP           vtpDatabaseGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP distribution of different database types."
+
+    GROUP           vtpAuthGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support
+        asymmetric keys authentication mechanism for VTP."
+
+    GROUP           vtpInternalVlanGrp
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 12 }
+
+vtpMIBCompliance13 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroupRev1,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    GROUP           vtpDiscoverGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP discovery."
+
+    GROUP           vtpDatabaseGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP distribution of different database types."
+
+    GROUP           vtpAuthGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support
+        asymmetric keys authentication mechanism for VTP."
+
+    GROUP           vtpInternalVlanGrp
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vlanStatsGroup
+    DESCRIPTION
+        "This group is mandatory for agents capable of
+        providing VLAN statistics information."
+
+    GROUP           vtpConfigNotificationsGroup6
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup7
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    OBJECT          managementDomainRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          vlanTrunkPortRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required, and only one
+        of the six enumerated values for the
+        RowStatus textual convention need be
+        supported, specifically: active(1)."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainLocalMode
+    SYNTAX          INTEGER  {
+                        client(1),
+                        server(2),
+                        transparent(3)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "This object is read-only if vtpVersion
+        is none(3)."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 13 }
+
+vtpMIBCompliance14 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroupRev1,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpTrunkPruningGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpTrunkPruningGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpTrunkPortGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtpTrunkPortGroup3
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    GROUP           vtpConfigNotificationsGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup3
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup4
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpDiscoverGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP discovery."
+
+    GROUP           vtpDatabaseGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP distribution of different database types."
+
+    GROUP           vtpAuthGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support
+        asymmetric keys authentication mechanism for VTP."
+
+    GROUP           vtpInternalVlanGrp
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vlanStatsGroup
+    DESCRIPTION
+        "This group is mandatory for agents capable of
+        providing VLAN statistics information."
+
+    GROUP           vtpConfigNotificationsGroup6
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup7
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpTrunkPruningGroup3
+    DESCRIPTION
+        "This group is mandatory for devices which
+        support operational VTP pruning state."
+
+    GROUP           vtpConfigNotificationsGroup8
+    DESCRIPTION
+        "This group is mandatory for devices which
+        support the notification generation on operational 
+        VTP pruning state change."
+
+    OBJECT          vtpNotificationsEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanCreatedNotifEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanDeletedNotifEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainLocalMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainPruningState
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpInternalVlanAllocPolicy
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditOperation
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditBufferOwner
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditConfigRevNumber
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditState
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditMtu
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditDot10Said
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditRingNumber
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditBridgeNumber
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditStpType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditParentVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    WRITE-SYNTAX    INTEGER  {
+                        createAndGo(4),
+                        destroy(6)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required.
+
+        Support for createAndWait and notInService is not required."
+
+    OBJECT          vtpVlanEditTranslationalVlan1
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTranslationalVlan2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditBridgeType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditAreHopCount
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditSteHopCount
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditIsCRFBackup
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansPruningEligible
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDynamicState
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVtpEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled2k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled3k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled4k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlansPruningEligible2k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlansPruningEligible3k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlansPruningEligible4k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortSetSerialNo
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDiscoverAction
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDatabaseLocalMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDatabaseTakeOverPrimary
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDatabaseTakeOverPassword
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpAuthPassword
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpAuthPasswordType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpAuthSecretKey
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 14 }
+
+vtpMIBCompliance15 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for VTP implementations."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        vtpBasicGroup,
+                        vtpVlanInfoGroup,
+                        vtpConfigNotificationsGroupRev1,
+                        vtpStatsGroup,
+                        vtpTrunkPortGroup,
+                        vtpVersion2BasicGroup,
+                        vtpNotificationObjectsGroup
+                    }
+
+    GROUP           vtpTrunkPruningGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpTrunkPruningGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpTrunkPortGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpVlanInfoEditGroup
+    DESCRIPTION
+        "This group must be implemented by VTP Servers.
+        VTP Clients need not implement these objects, and
+        must not allow VLANs to be created, modified, or
+        destroyed using these objects."
+
+    GROUP           vtpTrunkPortGroup3
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtp4kVlanGroupRev1
+    DESCRIPTION
+        "This group must be implemented by the VTP Servers
+        which support the range of VlanIndex between 1024
+        and 4095."
+
+    GROUP           vtpVlanIfIndexGroup
+    DESCRIPTION
+        "This group is an optional group containing
+        objects providing information about the mapping
+        of VLAN ID to its corresponding IfIndex."
+
+    GROUP           vtpVlanInfoEditGroup2
+    DESCRIPTION
+        "This group is mandatory for devices which only support
+        one VLAN editing for each 'apply' operation."
+
+    GROUP           vtpVlanNotifEnabledGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        notifications/traps in vtpConfigNotificationsGroup3."
+
+    GROUP           vtpConfigNotificationsGroup2
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup3
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup4
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpDiscoverGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP discovery."
+
+    GROUP           vtpDatabaseGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support the
+        VTP distribution of different database types."
+
+    GROUP           vtpAuthGroup
+    DESCRIPTION
+        "This group is mandatory for devices which support
+        asymmetric keys authentication mechanism for VTP."
+
+    GROUP           vtpInternalVlanGrp
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vlanStatsGroup
+    DESCRIPTION
+        "This group is mandatory for agents capable of
+        providing VLAN statistics information."
+
+    GROUP           vtpConfigNotificationsGroup6
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpConfigNotificationsGroup7
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP           vtpTrunkPruningGroup3
+    DESCRIPTION
+        "This group is mandatory for devices which
+        support operational VTP pruning state."
+
+    GROUP           vtpConfigNotificationsGroup8
+    DESCRIPTION
+        "This group is mandatory for devices which
+        support the notification generation on operational 
+        VTP pruning state change."
+
+    GROUP           vlanTrunkPortActiveVlansGroup
+    DESCRIPTION
+        "This group is mandatory for devices capable of
+        providing active vlans information for trunk
+        capable ports."
+
+    OBJECT          vtpNotificationsEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanCreatedNotifEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanDeletedNotifEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainLocalMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainTftpServer
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainTftpPathname
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainPruningState
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          managementDomainVersionInUse
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpInternalVlanAllocPolicy
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditOperation
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditBufferOwner
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditConfigRevNumber
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditState
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditName
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditMtu
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditDot10Said
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditRingNumber
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditBridgeNumber
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditStpType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditParentVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditRowStatus
+    SYNTAX          INTEGER  {
+                        active(1)
+                    }
+    WRITE-SYNTAX    INTEGER  {
+                        createAndGo(4),
+                        destroy(6)
+                    }
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required.
+
+        Support for createAndWait and notInService is not required."
+
+    OBJECT          vtpVlanEditTranslationalVlan1
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTranslationalVlan2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditBridgeType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditAreHopCount
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditSteHopCount
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditIsCRFBackup
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlanEditTypeExt2
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortManagementDomain
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortEncapsulationType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortNativeVlan
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortRowStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansPruningEligible
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortDynamicState
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVtpEnabled
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled2k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled3k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortVlansEnabled4k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlansPruningEligible2k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlansPruningEligible3k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpVlansPruningEligible4k
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vlanTrunkPortSetSerialNo
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDiscoverAction
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDatabaseLocalMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDatabaseTakeOverPrimary
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpDatabaseTakeOverPassword
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpAuthPassword
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpAuthPasswordType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          vtpAuthSecretKey
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { vtpMIBCompliances 15 }
+
+-- units of conformance
+
+vtpBasicGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpVersion,
+                        vtpMaxVlanStorage,
+                        vtpNotificationsEnabled,
+                        managementDomainName,
+                        managementDomainLocalMode,
+                        managementDomainConfigRevNumber,
+                        managementDomainLastUpdater,
+                        managementDomainLastChange,
+                        managementDomainTftpServer,
+                        managementDomainTftpPathname,
+                        managementDomainRowStatus
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing basic status and control
+        of a VTP implementation."
+    ::= { vtpMIBGroups 1 }
+
+vtpVlanInfoGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpVlanState,
+                        vtpVlanType,
+                        vtpVlanName,
+                        vtpVlanMtu,
+                        vtpVlanDot10Said,
+                        vtpVlanRingNumber,
+                        vtpVlanBridgeNumber,
+                        vtpVlanStpType,
+                        vtpVlanParentVlan,
+                        vtpVlanTranslationalVlan1,
+                        vtpVlanTranslationalVlan2,
+                        vtpVlanBridgeType,
+                        vtpVlanAreHopCount,
+                        vtpVlanSteHopCount,
+                        vtpVlanIsCRFBackup
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for monitoring VLAN information."
+    ::= { vtpMIBGroups 13 }
+
+vtpVlanInfoEditGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpVlanEditOperation,
+                        vtpVlanApplyStatus,
+                        vtpVlanEditBufferOwner,
+                        vtpVlanEditConfigRevNumber,
+                        vtpVlanEditState,
+                        vtpVlanEditType,
+                        vtpVlanEditName,
+                        vtpVlanEditMtu,
+                        vtpVlanEditDot10Said,
+                        vtpVlanEditRingNumber,
+                        vtpVlanEditBridgeNumber,
+                        vtpVlanEditStpType,
+                        vtpVlanEditParentVlan,
+                        vtpVlanEditRowStatus,
+                        vtpVlanEditTranslationalVlan1,
+                        vtpVlanEditTranslationalVlan2,
+                        vtpVlanEditBridgeType,
+                        vtpVlanEditAreHopCount,
+                        vtpVlanEditSteHopCount,
+                        vtpVlanEditIsCRFBackup
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for editing VLAN information in VTP
+        Servers."
+    ::= { vtpMIBGroups 14 }
+
+vtpStatsGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpInSummaryAdverts,
+                        vtpInSubsetAdverts,
+                        vtpInAdvertRequests,
+                        vtpOutSummaryAdverts,
+                        vtpOutSubsetAdverts,
+                        vtpOutAdvertRequests,
+                        vtpConfigRevNumberErrors,
+                        vtpConfigDigestErrors
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing VTP statistics."
+    ::= { vtpMIBGroups 4 }
+
+vtpTrunkPortGroup OBJECT-GROUP
+    OBJECTS         {
+                        vlanTrunkPortManagementDomain,
+                        vlanTrunkPortEncapsulationType,
+                        vlanTrunkPortVlansEnabled,
+                        vlanTrunkPortNativeVlan,
+                        vlanTrunkPortRowStatus,
+                        vlanTrunkPortSetSerialNo
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information on trunk
+        ports."
+    ::= { vtpMIBGroups 5 }
+
+vtpTrunkPortGroup2 OBJECT-GROUP
+    OBJECTS         {
+                        vlanTrunkPortDynamicState,
+                        vlanTrunkPortDynamicStatus,
+                        vlanTrunkPortVtpEnabled
+                    }
+    STATUS          current
+    DESCRIPTION
+        "Additional functionality added to the
+        vlanTrunkPortTable."
+    ::= { vtpMIBGroups 11 }
+
+vtpTrunkPortGroup3 OBJECT-GROUP
+    OBJECTS         { vlanTrunkPortEncapsulationOperType }
+    STATUS          current
+    DESCRIPTION
+        "Additional functionality added to the
+        vlanTrunkPortTable."
+    ::= { vtpMIBGroups 15 }
+
+vtpTrunkPruningGroup OBJECT-GROUP
+    OBJECTS         {
+                        vlanTrunkPortInJoins,
+                        vlanTrunkPortOutJoins,
+                        vlanTrunkPortOldAdverts,
+                        vlanTrunkPortVlansPruningEligible,
+                        vlanTrunkPortVlansXmitJoined,
+                        vlanTrunkPortVlansRcvJoined
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information on VLAN
+        pruning."
+    ::= { vtpMIBGroups 7 }
+
+vtpTrunkPruningGroup2 OBJECT-GROUP
+    OBJECTS         { managementDomainPruningState }
+    STATUS          current
+    DESCRIPTION
+        "A collection of object providing information on whether
+        VLAN pruning is enabled."
+    ::= { vtpMIBGroups 10 }
+
+vtpVersion2BasicGroup OBJECT-GROUP
+    OBJECTS         { managementDomainVersionInUse }
+    STATUS          current
+    DESCRIPTION
+        "The object required to indicate the version of VTP in
+        use by a management domain."
+    ::= { vtpMIBGroups 12 }
+
+vtpConfigNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        vtpConfigDigestError,
+                        vtpConfigRevNumberError,
+                        vtpServerDisabled,
+                        vtpMtuTooBig,
+                        vtpVersionOneDeviceDetected,
+                        vlanTrunkPortDynamicStatusChange
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "The notifications which a VTP implementation is
+        required to implement."
+    ::= { vtpMIBGroups 6 }
+
+vtp4kVlanGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpVlanTypeExt,
+                        vtpVlanEditTypeExt,
+                        vlanTrunkPortVlansEnabled2k,
+                        vlanTrunkPortVlansEnabled3k,
+                        vlanTrunkPortVlansEnabled4k,
+                        vtpVlansPruningEligible2k,
+                        vtpVlansPruningEligible3k,
+                        vtpVlansPruningEligible4k,
+                        vlanTrunkPortVlansXmitJoined2k,
+                        vlanTrunkPortVlansXmitJoined3k,
+                        vlanTrunkPortVlansXmitJoined4k,
+                        vlanTrunkPortVlansRcvJoined2k,
+                        vlanTrunkPortVlansRcvJoined3k,
+                        vlanTrunkPortVlansRcvJoined4k
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects providing information
+        for VLANS with VlanIndex from 1024 to 4095."
+    ::= { vtpMIBGroups 16 }
+
+vtpDot1qTunnelGroup OBJECT-GROUP
+    OBJECTS         {
+                        vlanTrunkPortsDot1qTag,
+                        vlanTrunkPortDot1qTunnel
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects providing information
+        for dot1qtunnel feature."
+    ::= { vtpMIBGroups 17 }
+
+vtpVlanIfIndexGroup OBJECT-GROUP
+    OBJECTS         { vtpVlanIfIndex }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        for mapping of VLAN ID to its corresponding
+        ifIndex."
+    ::= { vtpMIBGroups 18 }
+
+vtpVlanInfoEditGroup2 OBJECT-GROUP
+    OBJECTS         { vtpVlanEditModifiedVlan }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects for editing VLAN information when
+        only one VLAN is allowed to be edited for each 'apply'
+        operation."
+    ::= { vtpMIBGroups 19 }
+
+vtp4kVlanGroupRev1 OBJECT-GROUP
+    OBJECTS         {
+                        vtpVlanTypeExt,
+                        vtpVlanEditTypeExt2,
+                        vlanTrunkPortVlansEnabled2k,
+                        vlanTrunkPortVlansEnabled3k,
+                        vlanTrunkPortVlansEnabled4k,
+                        vtpVlansPruningEligible2k,
+                        vtpVlansPruningEligible3k,
+                        vtpVlansPruningEligible4k,
+                        vlanTrunkPortVlansXmitJoined2k,
+                        vlanTrunkPortVlansXmitJoined3k,
+                        vlanTrunkPortVlansXmitJoined4k,
+                        vlanTrunkPortVlansRcvJoined2k,
+                        vlanTrunkPortVlansRcvJoined3k,
+                        vlanTrunkPortVlansRcvJoined4k
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        for VLANS with VlanIndex from 1024 to 4095."
+    ::= { vtpMIBGroups 20 }
+
+vtpNotificationObjectsGroup OBJECT-GROUP
+    OBJECTS         { vtpVlanPortLocalSegment }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects included in VTP notifications."
+    ::= { vtpMIBGroups 21 }
+
+vtpDot1qTunnelGroup2 OBJECT-GROUP
+    OBJECTS         { vlanTrunkPortsDot1qTag }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects providing information
+        for dot1qtunnel feature."
+    ::= { vtpMIBGroups 22 }
+
+vtpConfigNotificationsGroup2 NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        vtpLocalModeChanged,
+                        vtpVersionInUseChanged
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The notifications which a VTP implementation is
+        required to implement."
+    ::= { vtpMIBGroups 23 }
+
+vtpVlanNotifEnabledGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpVlanCreatedNotifEnabled,
+                        vtpVlanDeletedNotifEnabled
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects to indicate whether a
+        certain group of notifications are enabled."
+    ::= { vtpMIBGroups 24 }
+
+vtpConfigNotificationsGroup3 NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        vtpVlanCreated,
+                        vtpVlanDeleted
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The notifications implemented by a device which
+        supports these features."
+    ::= { vtpMIBGroups 25 }
+
+vtpConfigNotificationsGroup4 NOTIFICATION-GROUP
+   NOTIFICATIONS    { vtpVlanRingNumberConflict }
+    STATUS          current
+    DESCRIPTION
+        "The notifications implemented by a device which
+        supports these features."
+    ::= { vtpMIBGroups 26 }
+
+vtpDiscoverGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpDiscoverAction,
+                        vtpDiscoverStatus,
+                        vtpLastDiscoverTime,
+                        vtpDiscoverResultIndex,
+                        vtpDiscoverResultDatabaseName,
+                        vtpDiscoverResultConflicting,
+                        vtpDiscoverResultDeviceId,
+                        vtpDiscoverResultPrimaryServer,
+                        vtpDiscoverResultRevNumber,
+                        vtpDiscoverResultSystemName
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information of
+        VTP discovery."
+    ::= { vtpMIBGroups 27 }
+
+vtpDatabaseGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpDatabaseName,
+                        vtpDatabaseLocalMode,
+                        vtpDatabaseRevNumber,
+                        vtpDatabasePrimaryServer,
+                        vtpDatabasePrimaryServerId,
+                        vtpDatabaseTakeOverPrimary,
+                        vtpDatabaseTakeOverPassword
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information of
+        VTP databases."
+    ::= { vtpMIBGroups 28 }
+
+vtpAuthGroup OBJECT-GROUP
+    OBJECTS         {
+                        vtpAuthPassword,
+                        vtpAuthPasswordType,
+                        vtpAuthSecretKey
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information of
+        VTP authentication mechanism."
+    ::= { vtpMIBGroups 29 }
+
+vtpConfigNotificationsGroupRev1 NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        vtpConfigDigestError,
+                        vtpConfigRevNumberError,
+                        vtpVersionOneDeviceDetected,
+                        vlanTrunkPortDynamicStatusChange
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The notifications which a VTP implementation is
+        required to implement."
+    ::= { vtpMIBGroups 30 }
+
+vtpConfigNotificationsGroup5 NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        vtpServerDisabled,
+                        vtpMtuTooBig
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "The additional notifications that may be
+        related to a VTP implementation."
+    ::= { vtpMIBGroups 31 }
+
+vtpInternalVlanGrp OBJECT-GROUP
+    OBJECTS         {
+                        vtpInternalVlanAllocPolicy,
+                        vtpInternalVlanOwner
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information of
+        internal VLANs."
+    ::= { vtpMIBGroups 32 }
+
+vlanStatsGroup OBJECT-GROUP
+    OBJECTS         {
+                        vlanStatsVlans,
+                        vlanStatsExtendedVlans,
+                        vlanStatsInternalVlans,
+                        vlanStatsFreeVlans
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing VLAN statistics
+        information in the system."
+    ::= { vtpMIBGroups 33 }
+
+vtpConfigNotificationsGroup6 NOTIFICATION-GROUP
+   NOTIFICATIONS    { vtpServerDisabled }
+    STATUS          current
+    DESCRIPTION
+        "The additional notifications that may be
+        related to a VTP implementation."
+    ::= { vtpMIBGroups 34 }
+
+vtpConfigNotificationsGroup7 NOTIFICATION-GROUP
+   NOTIFICATIONS    { vtpMtuTooBig }
+    STATUS          current
+    DESCRIPTION
+        "The additional notifications that may be
+        related to a VTP implementation."
+    ::= { vtpMIBGroups 35 }
+
+vtpTrunkPruningGroup3 OBJECT-GROUP
+    OBJECTS         { managementDomainPruningStateOper }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information on
+        operational VTP pruning state in a manamgement domain."
+    ::= { vtpMIBGroups 36 }
+
+vtpConfigNotificationsGroup8 NOTIFICATION-GROUP
+   NOTIFICATIONS    { vtpPruningStateOperChange }
+    STATUS          current
+    DESCRIPTION
+        "The additional notifications for operational
+        VTP pruning state change in a management domain."
+    ::= { vtpMIBGroups 37 }
+
+vlanTrunkPortActiveVlansGroup OBJECT-GROUP
+    OBJECTS         {
+                        vlanTrunkPortVlansActiveFirst2k,
+                        vlanTrunkPortVlansActiveSecond2k
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing active vlan
+        information for a trunking port in a management
+        domain."
+    ::= { vtpMIBGroups 38 }
+
+END
+
+
+
diff --git a/snmp_builder/mibs/CLNS-MIB.mib b/snmp_builder/mibs/CLNS-MIB.mib
new file mode 100644
index 0000000..c283fd1
--- /dev/null
+++ b/snmp_builder/mibs/CLNS-MIB.mib
@@ -0,0 +1,1294 @@
+CLNS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        experimental, Counter
+                FROM RFC1155-SMI
+        PhysAddress
+                FROM RFC-1213
+        OBJECT-TYPE
+                FROM RFC-1212;
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in [9]
+
+--  the CLNS MIB module
+
+clns    OBJECT IDENTIFIER ::= { experimental 1 }
+
+-- textual conventions
+
+ClnpAddress ::=
+        OCTET STRING (SIZE (1..21))
+-- This data type is used to model NSAP addresses.
+
+-- groups in the CLNS MIB
+
+clnp    OBJECT IDENTIFIER ::=   { clns 1 }
+
+error   OBJECT IDENTIFIER ::=   { clns 2 }
+
+echo    OBJECT IDENTIFIER ::=   { clns 3 }
+
+es-is   OBJECT IDENTIFIER ::=   { clns 4 }
+
+-- the CLNP group
+
+-- Implementation of this group is recommended for all
+-- systems which implement the CLNP.
+
+clnpForwarding OBJECT-TYPE
+    SYNTAX  INTEGER {
+                is(1),   -- entity is an intermediate system
+
+                         -- entity is an end system and does
+                es(2)   -- not forward PDUs
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The indication of whether this entity is active
+            as an intermediate or end system.  Only
+            intermediate systems will forward PDUs onward that
+            are not addressed to them."
+     ::= { clnp 1 }
+
+clnpDefaultLifeTime OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The default value inserted into the Lifetime
+            field of the CLNP PDU header of PDUs sourced by
+            this entity."
+    ::= { clnp 2 }
+
+clnpInReceives OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of input PDUs received from all
+            connected network interfaces running CLNP,
+            including errors."
+    ::= { clnp 3 }
+
+clnpInHdrErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input PDUs discarded due to errors
+            in the CLNP header, including bad checksums,
+            version mismatch, lifetime exceeded, errors
+            discovered in processing options, etc."
+    ::= { clnp 4 }
+
+clnpInAddrErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input PDUs discarded because the
+            NSAP address in the CLNP header's destination
+            field was not a valid NSAP to be received at this
+            entity.  This count includes addresses not
+            understood.  For end systems, this is a count of
+            PDUs which arrived with a destination NSAP which
+            was not local."
+    ::= { clnp 5 }
+
+clnpForwPDUs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input PDUs for which this entity
+            was not the final destination and which an attempt
+            was made to forward them onward."
+    ::= { clnp 6 }
+
+clnpInUnknownNLPs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of locally-addressed PDUs successfully
+            received but discarded because the network layer
+            protocol was unknown or unsupported (e.g., not
+            CLNP or ES-IS)."
+    ::= { clnp 7 }
+
+clnpInUnknownULPs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of locally-addressed PDUs successfully
+            received but discarded because the upper layer
+            protocol was unknown or unsupported (e.g., not
+            TP4)."
+    ::= { clnp 8 }
+
+clnpInDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input CLNP PDUs for which no
+            problems were encountered to prevent their
+            continued processing, but were discarded (e.g.,
+            for lack of buffer space).  Note that this counter
+            does not include any PDUs discarded while awaiting
+            re-assembly."
+    ::= { clnp 9 }
+
+clnpInDelivers OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of input PDUs successfully
+            delivered to the CLNS transport user."
+    ::= { clnp 10 }
+
+clnpOutRequests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of CLNP PDUs which local CLNS
+            user protocols supplied to CLNP for transmission
+            requests.  This counter does not include any PDUs
+            counted in clnpForwPDUs."
+    ::= { clnp 11 }
+
+clnpOutDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of output CLNP PDUs for which no other
+            problem was encountered to prevent their
+            transmission but were discarded (e.g., for lack of
+            buffer space).  Note this counter includes PDUs
+            counted in clnpForwPDUs."
+    ::= { clnp 12 }
+
+clnpOutNoRoutes OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDUs discarded because no
+            route could be found to transmit them to their
+            destination.  This counter includes any PDUs
+            counted in clnpForwPDUs."
+    ::= { clnp 13 }
+
+clnpReasmTimeout OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum number of seconds which received
+            segments are held while they are awaiting
+            reassembly at this entity."
+    ::= { clnp 14 }
+
+clnpReasmReqds OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP segments received which needed
+            to be reassembled at this entity."
+    ::= { clnp 15 }
+
+clnpReasmOKs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDUs successfully re-assembled
+            at this entity."
+    ::= { clnp 16 }
+
+clnpReasmFails OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of failures detected by the CLNP
+            reassembly algorithm (for any reason: timed out,
+            buffer size, etc)."
+    ::= { clnp 17 }
+
+clnpSegOKs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDUs that have been
+            successfully segmented at this entity."
+    ::= { clnp 18 }
+
+clnpSegFails OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDUs that have been discarded
+            because they needed to be fragmented at this
+            entity but could not."
+    ::= { clnp 19 }
+
+clnpSegCreates OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDU segments that have been
+            generated as a result of segmentation at this
+            entity."
+    ::= { clnp 20 }
+
+clnpInOpts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDU segments that have been
+            input with options at this entity."
+    ::= { clnp 25 }
+
+clnpOutOpts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP PDU segments that have been
+            generated with options by this entity."
+    ::= { clnp 26 }
+
+clnpRoutingDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of routing entries which were chosen
+            to be discarded even though they are valid.  One
+            possible reason for discarding such an entry could
+            be to free-up buffer space for other routing
+            entries."
+    ::= { clnp 27 }
+
+-- the CLNP Interfaces table
+
+-- The CLNP interfaces table contains information on the
+-- entity's interfaces which are running the CLNP.
+
+clnpAddrTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF ClnpAddrEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The table of addressing information relevant to
+            this entity's CLNP addresses.  "
+    ::= { clnp 21 }
+
+clnpAddrEntry OBJECT-TYPE
+    SYNTAX  ClnpAddrEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The addressing information for one of this
+            entity's CLNP addresses."
+    INDEX   { clnpAdEntAddr }
+    ::= { clnpAddrTable 1 }
+
+ClnpAddrEntry ::=
+    SEQUENCE {
+        clnpAdEntAddr
+            ClnpAddress,
+        clnpAdEntIfIndex
+            INTEGER,
+        clnpAdEntReasmMaxSize
+            INTEGER (0..65535)
+    }
+
+clnpAdEntAddr OBJECT-TYPE
+    SYNTAX  ClnpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The CLNP address to which this entry's addressing
+
+            information pertains."
+    ::= { clnpAddrEntry 1 }
+
+clnpAdEntIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The index value which uniquely identifies the
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is the same interface as identified by the
+            same value of ifIndex."
+    ::= { clnpAddrEntry 2 }
+
+clnpAdEntReasmMaxSize OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The size of the largest CLNP PDU which this
+            entity can re-assemble from incoming CLNP
+            segmented PDUs received on this interface."
+    ::= { clnpAddrEntry 3 }
+
+-- The CLNP Routing table
+
+-- The CLNP routing table contains an entry for each route
+-- known to the entity.
+
+clnpRoutingTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF ClnpRouteEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "This entity's CLNP routing table."
+    ::= { clnp 22 }
+
+clnpRouteEntry OBJECT-TYPE
+    SYNTAX  ClnpRouteEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A route to a particular destination."
+    INDEX   { clnpRouteDest }
+    ::= { clnpRoutingTable 1 }
+
+ClnpRouteEntry ::=
+    SEQUENCE {
+        clnpRouteDest
+            ClnpAddress,
+        clnpRouteIfIndex
+            INTEGER,
+        clnpRouteMetric1
+            INTEGER,
+        clnpRouteMetric2
+            INTEGER,
+        clnpRouteMetric3
+            INTEGER,
+        clnpRouteMetric4
+            INTEGER,
+        clnpRouteNextHop
+            ClnpAddress,
+        clnpRouteType
+            INTEGER,
+        clnpRouteProto
+            INTEGER,
+        clnpRouteAge
+            INTEGER,
+        clnpRouteMetric5
+            INTEGER,
+        clnpRouteInfo
+            OBJECT IDENTIFIER
+    }
+
+clnpRouteDest OBJECT-TYPE
+    SYNTAX  ClnpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The destination CLNP address of this route."
+    ::= { clnpRouteEntry 1 }
+
+clnpRouteIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The index value which uniquely identifies the
+            local interface through which the next hop of this
+            route should be reached.  The interface identified
+            by a particular value of this index is the same as
+            identified by the same value of ifIndex."
+    ::= { clnpRouteEntry 2 }
+
+clnpRouteMetric1 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The primary routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            clnpRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { clnpRouteEntry 3 }
+
+clnpRouteMetric2 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            clnpRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { clnpRouteEntry 4 }
+
+clnpRouteMetric3 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            clnpRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { clnpRouteEntry 5 }
+
+clnpRouteMetric4 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            clnpRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { clnpRouteEntry 6 }
+
+clnpRouteNextHop OBJECT-TYPE
+    SYNTAX  ClnpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The CLNP address of the next hop of this route."
+    ::= { clnpRouteEntry 7 }
+
+clnpRouteType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),      -- none of the following
+
+                invalid(2),    -- an invalidated route
+
+                               -- route to directly
+                direct(3),     -- connected (sub-)network
+
+                               -- route to a non-local
+                remote(4)      -- host/network/sub-network
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of route.
+
+            Setting this object to the value invalid(2) has
+            the effect of invaliding the corresponding entry
+            in the clnpRoutingTable.  That is, it effectively
+            dissasociates the destination identified with said
+            entry from the route identified with said entry.
+            It is an implementation-specific matter as to
+            whether the agent removes an invalidated entry
+            from the table.  Accordingly, management stations
+            must be prepared to receive tabular information
+            from agents that corresponds to entries not
+            currently in use.  Proper interpretation of such
+            entries requires examination of the relevant
+            clnpRouteType object."
+    ::= { clnpRouteEntry 8 }
+
+clnpRouteProto OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),     -- none of the following
+
+                              -- non-protocol information
+                              --   e.g., manually
+                local(2),     --   configured entries
+
+                              -- set via a network
+                netmgmt(3),   --   management protocol
+
+                              -- similar to ipRouteProto but
+                              -- omits several IP-specific
+                              -- protocols
+
+                is-is(9),
+                ciscoIgrp(11),
+                bbnSpfIgp(12),
+                ospf(13),
+                bgp(14)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The routing mechanism via which this route was
+            learned.  Inclusion of values for gateway routing
+            protocols is not intended to imply that hosts
+            should support those protocols."
+    ::= { clnpRouteEntry 9 }
+
+clnpRouteAge OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of seconds since this route was last
+            updated or otherwise determined to be correct.
+            Note that no semantics of `too old' can be implied
+            except through knowledge of the routing protocol
+            by which the route was learned."
+    ::= { clnpRouteEntry 10 }
+
+clnpRouteMetric5 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            clnpRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { clnpRouteEntry 11 }
+
+clnpRouteInfo OBJECT-TYPE
+    SYNTAX  OBJECT IDENTIFIER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A reference to MIB definitions specific to the
+            particular routing protocol which is responsible
+            for this route, as determined by the value
+            specified in the route's clnpRouteProto value.  If
+            this information is not present, its value should
+            be set to the OBJECT IDENTIFIER { 0 0 }, which is
+            a syntatically valid object identifier, and any
+            conformant implementation of ASN.1 and BER must be
+            able to generate and recognize this value."
+    ::= { clnpRouteEntry 12 }
+
+-- the CLNP Address Translation table
+
+-- The Address Translation tables contain the CLNP address
+-- to physical address equivalences.  Some interfaces do not
+-- use translation tables for determining address
+-- equivalences; if all interfaces are of this type, then the
+-- Address Translation table is empty, i.e., has zero
+-- entries.
+
+clnpNetToMediaTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF ClnpNetToMediaEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The CLNP Address Translation table used for
+            mapping from CLNP addresses to physical
+            addresses."
+    ::= { clnp 23 }
+
+clnpNetToMediaEntry OBJECT-TYPE
+    SYNTAX  ClnpNetToMediaEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Each entry contains one CLNP address to
+            `physical' address equivalence."
+    INDEX   { clnpNetToMediaIfIndex, clnpNetToMediaNetAddress }
+    ::= { clnpNetToMediaTable 1 }
+
+ClnpNetToMediaEntry ::=
+    SEQUENCE {
+        clnpNetToMediaIfIndex
+            INTEGER,
+        clnpNetToMediaPhysAddress
+            PhysAddress,
+        clnpNetToMediaNetAddress
+            ClnpAddress,
+        clnpNetToMediaType
+            INTEGER,
+        clnpNetToMediaAge
+            INTEGER,
+        clnpNetToMediaHoldTime
+            INTEGER
+    }
+
+clnpNetToMediaIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The interface on which this entry's equivalence
+            is effective.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value of
+            ifIndex."
+    ::= { clnpNetToMediaEntry 1 }
+
+clnpNetToMediaPhysAddress OBJECT-TYPE
+    SYNTAX  PhysAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The media-dependent `physical' address."
+    ::= { clnpNetToMediaEntry 2 }
+
+clnpNetToMediaNetAddress OBJECT-TYPE
+    SYNTAX  ClnpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The CLNP address corresponding to the media-
+            dependent `physical' address."
+    ::= { clnpNetToMediaEntry 3 }
+
+clnpNetToMediaType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),       -- none of the following
+                invalid(2),     -- an invalidated mapping
+                dynamic(3),
+                static(4)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of mapping.
+
+            Setting this object to the value invalid(2) has
+            the effect of invalidating the corresponding entry
+            in the clnpNetToMediaTable.  That is, it
+            effectively dissassociates the interface
+            identified with said entry from the mapping
+            identified with said entry.  It is an
+            implementation-specific matter as to whether the
+            agent removes an invalidated entry from the table.
+            Accordingly, management stations must be prepared
+            to receive tabular information from agents that
+            corresponds to entries not currently in use.
+            Proper interpretation of such entries requires
+            examination of the relevant clnpNetToMediaType
+            object."
+    ::= { clnpNetToMediaEntry 4 }
+
+clnpNetToMediaAge OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of seconds since this entry was last
+            updated or otherwise determined to be correct.
+            Note that no semantics of `too old' can be implied
+            except through knowledge of the type of entry."
+    ::= { clnpNetToMediaEntry 5 }
+
+clnpNetToMediaHoldTime OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The time in seconds this entry will be valid.
+            Static entries should always report this field as
+            -1."
+    ::= { clnpNetToMediaEntry 6 }
+
+clnpMediaToNetTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF ClnpMediaToNetEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The CLNP Address Translation table used for
+
+            mapping from physical addresses to CLNP
+            addresses."
+    ::= { clnp 24 }
+
+clnpMediaToNetEntry OBJECT-TYPE
+    SYNTAX  ClnpMediaToNetEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Each entry contains on ClnpAddress to `physical'
+            address equivalence."
+    INDEX   { clnpMediaToNetIfIndex, clnpMediaToNetPhysAddress }
+    ::= { clnpMediaToNetTable 1 }
+
+ClnpMediaToNetEntry ::=
+    SEQUENCE {
+        clnpMediaToNetIfIndex
+            INTEGER,
+        clnpMediaToNetNetAddress
+            ClnpAddress,
+        clnpMediaToNetPhysAddress
+            PhysAddress,
+        clnpMediaToNetType
+            INTEGER,
+        clnpMediaToNetAge
+            INTEGER,
+        clnpMediaToNetHoldTime
+            INTEGER
+    }
+
+clnpMediaToNetIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The interface on which this entry's equivalence
+            is effective.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value of
+            ifIndex."
+    ::= { clnpMediaToNetEntry 1 }
+
+clnpMediaToNetAddress OBJECT-TYPE
+    SYNTAX  ClnpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The ClnpAddress corresponding to the media-
+
+            dependent `physical' address."
+    ::= { clnpMediaToNetEntry 2 }
+
+clnpMediaToNetPhysAddress OBJECT-TYPE
+    SYNTAX  PhysAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The media-dependent `physical' address."
+    ::= { clnpMediaToNetEntry 3 }
+
+clnpMediaToNetType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),       -- none of the following
+                invalid(2),     -- an invalidated mapping
+                dynamic(3),
+                static(4)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of mapping.
+
+            Setting this object to the value invalid(2) has
+            the effect of invalidating the corresponding entry
+            in the clnpMediaToNetTable.  That is, it
+            effectively dissassociates the interface
+            identified with said entry from the mapping
+            identified with said entry.  It is an
+            implementation-specific matter as to whether the
+            agent removes an invalidated entry from the table.
+            Accordingly, management stations must be prepared
+            to receive tabular information from agents that
+            corresponds to entries not currently in use.
+            Proper interpretation of such entries requires
+            examination of the relevant clnpMediaToNetType
+            object."
+    ::= { clnpMediaToNetEntry 4 }
+
+clnpMediaToNetAge OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of seconds since this entry was last
+            updated or otherwise determined to be correct.
+            Note that no semantics of `too old' can be implied
+            except through knowledge of the type of entry."
+    ::= { clnpMediaToNetEntry 5 }
+
+clnpMediaToNetHoldTime OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The time in seconds this entry will be valid.
+            Static entries should always report this field as
+            -1."
+    ::= { clnpMediaToNetEntry 6 }
+
+-- the CLNP Error group
+
+-- Implementation of this group is recommended for all
+-- systems which implement the CLNP Error protocol.
+
+clnpInErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP Error PDUs received by this
+            entity."
+    ::= { error 1 }
+
+clnpOutErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of CLNP Error PDUs sent by this
+            entity."
+    ::= { error 2 }
+
+clnpInErrUnspecs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unspecified CLNP Error PDUs
+            received by this entity."
+    ::= { error 3 }
+
+clnpInErrProcs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of protocol procedure CLNP Error PDUs
+            received by this entity."
+    ::= { error 4 }
+
+clnpInErrCksums OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of checksum CLNP Error PDUs received
+            by this entity."
+    ::= { error 5 }
+
+clnpInErrCongests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of congestion drop CLNP Error PDUs
+            received by this entity."
+    ::= { error 6 }
+
+clnpInErrHdrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of header syntax CLNP Error PDUs
+            received by this entity."
+    ::= { error 7 }
+
+clnpInErrSegs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of segmentation disallowed CLNP Error
+            PDUs received by this entity."
+    ::= { error 8 }
+
+clnpInErrIncomps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of incomplete PDU CLNP Error PDUs
+
+            received by this entity."
+    ::= { error 9 }
+
+clnpInErrDups OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of duplicate option CLNP Error PDUs
+            received by this entity."
+    ::= { error 10 }
+
+clnpInErrUnreachDsts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unreachable destination CLNP Error
+            PDUs received by this entity."
+    ::= { error 11 }
+
+clnpInErrUnknownDsts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unknown destination CLNP Error PDUs
+            received by this entity."
+    ::= { error 12 }
+
+clnpInErrSRUnspecs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unspecified source route CLNP Error
+            PDUs received by this entity."
+    ::= { error 13 }
+
+clnpInErrSRSyntaxes OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of source route syntax CLNP Error PDUs
+            received by this entity."
+    ::= { error 14 }
+
+clnpInErrSRUnkAddrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of source route unknown address CLNP
+            Error PDUs received by this entity."
+    ::= { error 15 }
+
+clnpInErrSRBadPaths OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of source route bad path CLNP Error
+            PDUs received by this entity."
+    ::= { error 16 }
+
+clnpInErrHops OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of hop count exceeded CLNP Error PDUs
+            received by this entity."
+    ::= { error 17 }
+
+clnpInErrHopReassms OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of hop count exceeded while
+            reassembling CLNP Error PDUs received by this
+            entity."
+    ::= { error 18 }
+
+clnpInErrUnsOptions OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported option CLNP Error PDUs
+            received by this entity."
+    ::= { error 19 }
+
+clnpInErrUnsVersions OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of version mismatch CLNP Error PDUs
+            received by this entity."
+    ::= { error 20 }
+
+clnpInErrUnsSecurities OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported security option CLNP
+            Error PDUs received by this entity."
+    ::= { error 21 }
+
+clnpInErrUnsSRs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported source route option
+            CLNP Error PDUs received by this entity."
+    ::= { error 22 }
+
+clnpInErrUnsRRs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported record route option
+            CLNP Error PDUs received by this entity."
+    ::= { error 23 }
+
+clnpInErrInterferences OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of reassembly interference CLNP Error
+            PDUs received by this entity."
+    ::= { error 24 }
+
+clnpOutErrUnspecs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unspecified CLNP Error PDUs sent by
+            this entity."
+    ::= { error 25 }
+
+clnpOutErrProcs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of protocol procedure CLNP Error PDUs
+            sent by this entity."
+    ::= { error 26 }
+
+clnpOutErrCksums OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of checksum CLNP Error PDUs sent by
+            this entity."
+    ::= { error 27 }
+
+clnpOutErrCongests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of congestion drop CLNP Error PDUs
+            sent by this entity."
+    ::= { error 28 }
+
+clnpOutErrHdrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of header syntax CLNP Error PDUs sent
+            by this entity."
+    ::= { error 29 }
+
+clnpOutErrSegs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of segmentation disallowed CLNP Error
+            PDUs sent by this entity."
+    ::= { error 30 }
+
+clnpOutErrIncomps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of incomplete PDU CLNP Error PDUs sent
+            by this entity."
+    ::= { error 31 }
+
+clnpOutErrDups OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of duplicate option CLNP Error PDUs
+            sent by this entity."
+    ::= { error 32 }
+
+clnpOutErrUnreachDsts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unreachable destination CLNP Error
+            PDUs sent by this entity."
+    ::= { error 33 }
+
+clnpOutErrUnknownDsts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unknown destination CLNP Error PDUs
+            sent by this entity."
+    ::= { error 34 }
+
+clnpOutErrSRUnspecs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unspecified source route CLNP Error
+            PDUs sent by this entity."
+    ::= { error 35 }
+
+clnpOutErrSRSyntaxes OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of source route syntax CLNP Error PDUs
+            sent by this entity."
+    ::= { error 36 }
+
+clnpOutErrSRUnkAddrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of source route unknown address CLNP
+            Error PDUs sent by this entity."
+    ::= { error 37 }
+
+clnpOutErrSRBadPaths OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of source route bad path CLNP Error
+            PDUs sent by this entity."
+    ::= { error 38 }
+
+clnpOutErrHops OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of hop count exceeded CLNP Error PDUs
+            sent by this entity."
+    ::= { error 39 }
+
+clnpOutErrHopReassms OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of hop count exceeded while
+            reassembling CLNP Error PDUs sent by this entity."
+    ::= { error 40 }
+
+clnpOutErrUnsOptions OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported option CLNP Error PDUs
+
+            sent by this entity."
+    ::= { error 41 }
+
+clnpOutErrUnsVersions OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of version mismatch CLNP Error PDUs
+            sent by this entity."
+    ::= { error 42 }
+
+clnpOutErrUnsSecurities OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported security option CLNP
+            Error PDUs sent by this entity."
+    ::= { error 43 }
+
+clnpOutErrUnsSRs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported source route option
+            CLNP Error PDUs sent by this entity."
+    ::= { error 44 }
+
+clnpOutErrUnsRRs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of unsupported record route option
+            CLNP Error PDUs sent by this entity."
+    ::= { error 45 }
+
+clnpOutErrInterferences OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of reassembly interference CLNP Error
+            PDUs sent by this entity."
+    ::= { error 46 }
+
+-- the ES-IS group
+
+-- Implementation of this group is recommended for all
+-- systems which implement the End-System to Intermediate
+-- System protocol.
+
+esisESHins OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ESH PDUs received by this entity."
+    ::= { es-is 1 }
+
+esisESHouts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ESH PDUs sent by this entity."
+    ::= { es-is 2 }
+
+esisISHins OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ISH PDUs received by this entity."
+    ::= { es-is 3 }
+
+esisISHouts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ISH PDUs sent by this entity."
+    ::= { es-is 4 }
+
+esisRDUins OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of RDU PDUs received by this entity."
+    ::= { es-is 5 }
+
+esisRDUouts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of RDU PDUs sent by this entity."
+    ::= { es-is 6 }
+
+END
diff --git a/snmp_builder/mibs/COPS-CLIENT-MIB.mib b/snmp_builder/mibs/COPS-CLIENT-MIB.mib
new file mode 100644
index 0000000..e318365
--- /dev/null
+++ b/snmp_builder/mibs/COPS-CLIENT-MIB.mib
@@ -0,0 +1,844 @@
+COPS-CLIENT-MIB DEFINITIONS ::= BEGIN
+
+-- -------------------------------------------------------------
+-- -------------------------------------------------------------
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
+    Unsigned32, mib-2
+        FROM SNMPv2-SMI
+    TimeStamp, TimeInterval, RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB;
+
+--    REFERENCE
+
+--        "The COPS (Common Open Policy Service) Protocol RFC 2748
+
+copsClientMIB MODULE-IDENTITY
+    LAST-UPDATED "200009280000Z"
+    ORGANIZATION "IETF RSVP Admission Policy Working Group"
+    CONTACT-INFO
+        "       Andrew Smith (WG co-chair)
+         Phone: +1 408 579 2821
+         Email: ah_smith@pacbell.net
+
+                Mark Stevens (WG co-chair)
+         Phone: +1 978 287 9102
+         Email: markstevens@lucent.com
+
+         Editor: Andrew Smith
+         Phone: +1 408 579 2821
+         Email: ah_smith@pacbell.net
+
+         Editor: David Partain
+         Phone: +46 13 28 41 44
+         Email: David.Partain@ericsson.com
+
+         Editor: John Seligson
+         Phone: +1 408 495 2992
+         Email: jseligso@nortelnetworks.com"
+    DESCRIPTION
+        "The COPS Client MIB module"
+
+    REVISION    "200009280000Z"
+    DESCRIPTION "This version published as RFC 2940"
+    ::= { mib-2 89 }
+
+copsClientMIBObjects OBJECT IDENTIFIER ::= { copsClientMIB 1 }
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+CopsClientState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value indicating the state of a COPS client."
+    SYNTAX      INTEGER {
+            copsClientInvalid(1),      -- default state.
+            copsClientTcpconnected(2), -- TCP connection up but COPS
+                                       -- not yet open.
+
+            copsClientAuthenticating(3), -- TCP connection up but still
+                                         -- authenticating.
+            copsClientSecAccepted(4),  -- connection authenticated.
+            copsClientAccepted(5),     -- COPS server accepted client.
+            copsClientTimingout(6)     -- Keepalive timer has expired,
+                                       -- client is in process of
+                                       -- tearing down connection.
+    }
+
+CopsServerEntryType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value indicating how a COPS server entry came into existence."
+    SYNTAX      INTEGER {
+            copsServerStatic(1),        -- configured by manager
+            copsServerRedirect(2)       -- notified by COPS server
+    }
+
+CopsErrorCode ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value describing a COPS protocol error. Codes are identical
+         to those used by the COPS protocol itself."
+    SYNTAX      INTEGER {
+            errorOther(0),             -- none of the below
+            errorBadHandle(1),
+            errorInvalidHandleReference(2),
+            errorBadMessageFormat(3),
+            errorUnableToProcess(4),
+            errorMandatoryClientSiMissing(5),
+            errorUnsupportedClientType(6),
+            errorMandatoryCopsObjectMissing(7),
+            errorClientFailure(8),
+            errorCommunicationFailure(9),
+            errorUnspecified(10),        -- client-type specific subcode
+            errorShuttingDown(11),
+            errorRedirectToPreferredServer(12),
+            errorUnknownCopsObject(13),
+            errorAuthenticationFailure(14),
+            errorAuthenticationMissing(15)
+    }
+--  REFERENCE
+--      "RFC 2748 section 2.2.8"
+
+CopsTcpPort ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value indicating a TCP protocol port number."
+    SYNTAX      INTEGER (0..65535)
+
+CopsAuthType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value indicating a type of security authentication mechanism."
+    SYNTAX      INTEGER {
+        authNone(0),
+        authOther(1),
+        authIpSecAh(2),
+        authIpSecEsp(3),
+        authTls(4),
+        authCopsIntegrity(5)
+    }
+
+-- -------------------------------------------------------------
+
+copsClientCapabilitiesGroup OBJECT IDENTIFIER
+                            ::= { copsClientMIBObjects 1 }
+
+-- -------------------------------------------------------------
+--
+-- Capabilities of the COPS client to connect to a COPS server:
+--
+copsClientCapabilities OBJECT-TYPE
+    SYNTAX      BITS {
+        copsClientVersion1(0),     -- supports version1 of COPS protocol
+        copsClientAuthIpSecAh(1) , -- supports IP-SEC Authentication
+        copsClientAuthIpSecEsp(2), -- supports IP-SEC Encryption
+        copsClientAuthTls(3),      -- supports Transport-Layer Security
+        copsClientAuthInteg(4)     -- supports COPS Integrity
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A list of the optional capabilities that this COPS client
+        supports."
+    ::= { copsClientCapabilitiesGroup 1 }
+
+-- -------------------------------------------------------------
+
+copsClientStatusGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 2 }
+
+-- -------------------------------------------------------------
+--
+-- Current status of COPS server connections, all read-only.
+--
+
+copsClientServerCurrentTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CopsClientServerCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of information regarding COPS servers as seen from the
+        point of view of a COPS client. This table contains entries
+        for both statically-configured and dynamically-learned servers
+        (from a PDP Redirect operation). One entry exists in this table
+        for each COPS Client-Type served by the COPS server. In addition,
+        an entry will exist with copsClientServerClientType 0 (zero)
+        representing information about the underlying connection itself:
+        this is consistent with the COPS specification which reserves
+        this value for this purpose."
+    ::= { copsClientStatusGroup 1 }
+
+copsClientServerCurrentEntry OBJECT-TYPE
+    SYNTAX      CopsClientServerCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of information regarding a single COPS server serving
+        a single COPS Client-Type from the point of view of a COPS
+        client."
+    INDEX { copsClientServerAddressType, copsClientServerAddress,
+            copsClientServerClientType }
+    ::= { copsClientServerCurrentTable 1 }
+
+CopsClientServerCurrentEntry ::=
+    SEQUENCE {
+        copsClientServerAddressType         InetAddressType,
+        copsClientServerAddress             InetAddress,
+        copsClientServerClientType          INTEGER,
+        copsClientServerTcpPort             CopsTcpPort,
+        copsClientServerType                CopsServerEntryType,
+        copsClientServerAuthType            CopsAuthType,
+        copsClientServerLastConnAttempt     TimeStamp,
+        copsClientState                     CopsClientState,
+        copsClientServerKeepaliveTime       TimeInterval,
+        copsClientServerAccountingTime      TimeInterval,
+        copsClientInPkts                    Counter32,
+        copsClientOutPkts                   Counter32,
+        copsClientInErrs                    Counter32,
+        copsClientLastError                 CopsErrorCode,
+        copsClientTcpConnectAttempts        Counter32,
+        copsClientTcpConnectFailures        Counter32,
+        copsClientOpenAttempts              Counter32,
+        copsClientOpenFailures              Counter32,
+        copsClientErrUnsupportClienttype    Counter32,
+        copsClientErrUnsupportedVersion     Counter32,
+        copsClientErrLengthMismatch         Counter32,
+        copsClientErrUnknownOpcode          Counter32,
+        copsClientErrUnknownCnum            Counter32,
+        copsClientErrBadCtype               Counter32,
+        copsClientErrBadSends               Counter32,
+        copsClientErrWrongObjects           Counter32,
+        copsClientErrWrongOpcode            Counter32,
+        copsClientKaTimedoutClients         Counter32,
+        copsClientErrAuthFailures           Counter32,
+        copsClientErrAuthMissing            Counter32
+    }
+
+copsClientServerAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The type of address in copsClientServerAddress."
+    ::= { copsClientServerCurrentEntry 1 }
+
+copsClientServerAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The IPv4, IPv6 or DNS address of a COPS Server. Note that,
+        since this is an index to the table, the DNS name must be
+        short enough to fit into the maximum length of indices allowed
+        by the management protocol in use."
+    REFERENCE
+        "RFC 2748 section 2.3"
+    ::= { copsClientServerCurrentEntry 2 }
+
+copsClientServerClientType OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The COPS protocol Client-Type for which this entry
+        applies. Multiple Client-Types can be served by a single
+        COPS server. The value 0 (zero) indicates that this
+        entry contains information about the underlying connection
+        itself."
+    REFERENCE
+        "RFC 2748 section 6, IANA"
+    ::= { copsClientServerCurrentEntry 3 }
+
+copsClientServerTcpPort OBJECT-TYPE
+    SYNTAX      CopsTcpPort
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The TCP port number on the COPS server to which the
+        client should connect/is connected."
+    ::= { copsClientServerCurrentEntry 4 }
+
+copsClientServerType OBJECT-TYPE
+    SYNTAX      CopsServerEntryType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicator of the source of this COPS server information.
+        COPS servers may be configured by network management
+        into copsClientServerConfigTable and appear in this entry
+        with type copsServerStatic(1). Alternatively, the may be
+        notified from another COPS server by means of the COPS
+        PDP-Redirect mechanism and appear as copsServerRedirect(2)."
+    ::= { copsClientServerCurrentEntry 5 }
+
+copsClientServerAuthType OBJECT-TYPE
+    SYNTAX      CopsAuthType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicator of the current security mode in use between
+        client and this COPS server."
+    ::= { copsClientServerCurrentEntry 6 }
+
+copsClientServerLastConnAttempt OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Timestamp of the last time that this client attempted to
+        connect to this COPS server."
+    ::= { copsClientServerCurrentEntry 7 }
+
+copsClientState  OBJECT-TYPE
+    SYNTAX      CopsClientState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state of the connection and COPS protocol with respect
+
+        to this COPS server."
+    ::= { copsClientServerCurrentEntry 8 }
+
+copsClientServerKeepaliveTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of the COPS protocol Keepalive timeout, in
+        centiseconds, currently in use by this client, as
+        specified by this COPS server in the Client-Accept operation.
+        A value of zero indicates no keepalive activity is expected."
+    REFERENCE
+        "RFC 2748 section 3.7, 4.4"
+    ::= { copsClientServerCurrentEntry 9 }
+
+copsClientServerAccountingTime   OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of the COPS protocol Accounting timeout, in
+        centiseconds, currently in use by this client, as specified
+        by the COPS server in the Client-Accept operation. A value
+        of zero indicates no accounting activity is to be performed."
+    REFERENCE
+        "RFC 2748 section 3.7"
+    ::= { copsClientServerCurrentEntry 10 }
+
+copsClientInPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from this COPS server marked for this Client-Type.
+        This value is cumulative since agent restart and is not zeroed
+        on new connections."
+    ::= { copsClientServerCurrentEntry 11 }
+
+copsClientOutPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has sent to this COPS server marked for this Client-Type. This
+        value is cumulative since agent restart and is not zeroed on new
+
+        connections."
+    ::= { copsClientServerCurrentEntry 12 }
+
+copsClientInErrs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from this COPS server marked for this Client-Type
+        that contained errors in syntax. This value is cumulative since
+        agent restart and is not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 13 }
+
+copsClientLastError OBJECT-TYPE
+    SYNTAX      CopsErrorCode
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The code contained in the last COPS protocol Error Object
+        received by this client from this COPS server marked for this
+        Client-Type. This value is not zeroed on COPS Client-Open
+        operations."
+    REFERENCE
+        "RFC 2748 section 2.2.8"
+    ::= { copsClientServerCurrentEntry 14 }
+
+copsClientTcpConnectAttempts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the number of times that this COPS client has tried
+        (successfully or otherwise) to open an TCP connection to a COPS
+        server. This value is cumulative  since agent restart and is not
+        zeroed on new connections. This value is not incremented for
+        entries representing a non-zero Client-Type."
+    ::= { copsClientServerCurrentEntry 15 }
+
+copsClientTcpConnectFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the number of times that this COPS client has failed
+        to open an TCP connection to a COPS server. This value is
+        cumulative since agent restart and is not zeroed on new
+        connections. This value is not incremented for
+
+        entries representing a non-zero Client-Type."
+    ::= { copsClientServerCurrentEntry 16 }
+
+copsClientOpenAttempts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the number of times that this COPS client has tried
+        to perform a COPS Client-Open to a COPS server for this
+        Client-Type. This value is cumulative since agent restart and is
+        not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 17 }
+
+copsClientOpenFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the number of times that this COPS client has failed
+        to perform a COPS Client-Open to a COPS server for this
+        Client-Type. This value is cumulative since agent restart and is
+        not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 18 }
+
+copsClientErrUnsupportClienttype OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers that referred to Client-Types
+        that are unsupported by this client. This value is cumulative
+        since agent restart and is not zeroed on new connections. This
+        value is not incremented for entries representing a non-zero
+        Client-Type."
+    ::= { copsClientServerCurrentEntry 19 }
+
+copsClientErrUnsupportedVersion OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        had a COPS protocol Version number that is unsupported by this
+        client. This value is cumulative since agent restart and is not
+        zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 20 }
+
+copsClientErrLengthMismatch OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        had a COPS protocol Message Length that did not match the actual
+        received message. This value is cumulative since agent restart
+        and is not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 21 }
+
+copsClientErrUnknownOpcode OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        had a COPS protocol Op Code that was unrecognised by this
+        client. This value is cumulative since agent restart and is not
+        zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 22 }
+
+copsClientErrUnknownCnum OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        contained a COPS protocol object C-Num that was unrecognised by
+        this client. This value is cumulative since agent restart and is
+        not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 23 }
+
+copsClientErrBadCtype OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        contained a COPS protocol object C-Type that was not defined for
+        the C-Nums known by this client. This value is cumulative since
+        agent restart and is not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 24 }
+
+copsClientErrBadSends OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        attempted to send to COPS servers marked for this Client-Type
+        that resulted in a transmit error. This value is cumulative
+        since agent restart and is not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 25 }
+
+copsClientErrWrongObjects OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        did not contain a permitted set of COPS protocol objects. This
+        value is cumulative since agent restart and is not zeroed on new
+        connections."
+    ::= { copsClientServerCurrentEntry 26 }
+
+copsClientErrWrongOpcode OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of COPS messages that this client
+        has received from COPS servers marked for this Client-Type that
+        had a COPS protocol Op Code that should not have been sent to a
+        COPS client e.g. Open-Requests. This value is cumulative since
+        agent restart and is not zeroed on new connections."
+    ::= { copsClientServerCurrentEntry 27 }
+
+copsClientKaTimedoutClients OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of times that this client has
+        been shut down for this Client-Type by COPS servers that had
+        detected a COPS protocol Keepalive timeout. This value is
+        cumulative since agent restart and is not zeroed on new
+        connections."
+    ::= { copsClientServerCurrentEntry 28 }
+
+copsClientErrAuthFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of times that this client has
+        received a COPS message marked for this Client-Type which
+        could not be authenticated using the authentication mechanism
+        used by this client."
+    ::= { copsClientServerCurrentEntry 29 }
+
+copsClientErrAuthMissing OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the total number of times that this client has
+        received a COPS message marked for this Client-Type which did not
+        contain authentication information."
+    ::= { copsClientServerCurrentEntry 30 }
+
+-- -------------------------------------------------------------
+
+copsClientConfigGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 3 }
+
+-- -------------------------------------------------------------
+
+copsClientServerConfigTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF CopsClientServerConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Table of possible COPS servers to try to connect to in order
+        of copsClientServerConfigPriority. There may be multiple
+        entries in this table for the same server and client-type which
+        specify different security mechanisms: these mechanisms will
+        be attempted by the client in the priority order given. Note
+        that a server learned by means of PDPRedirect always takes
+        priority over any of these configured entries."
+    ::= { copsClientConfigGroup 1 }
+
+copsClientServerConfigEntry OBJECT-TYPE
+    SYNTAX      CopsClientServerConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of configuration information regarding a single
+
+        COPS server from the point of view of a COPS client."
+    INDEX { copsClientServerConfigAddrType,
+            copsClientServerConfigAddress,
+            copsClientServerConfigClientType,
+            copsClientServerConfigAuthType }
+    ::= { copsClientServerConfigTable 1 }
+
+CopsClientServerConfigEntry ::=
+    SEQUENCE {
+        copsClientServerConfigAddrType      InetAddressType,
+        copsClientServerConfigAddress       InetAddress,
+        copsClientServerConfigClientType    INTEGER,
+        copsClientServerConfigAuthType      CopsAuthType,
+        copsClientServerConfigTcpPort       CopsTcpPort,
+        copsClientServerConfigPriority      Integer32,
+        copsClientServerConfigRowStatus     RowStatus
+    }
+
+copsClientServerConfigAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The type of address in copsClientServerConfigAddress."
+    ::= { copsClientServerConfigEntry 1 }
+
+copsClientServerConfigAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The IPv4, IPv6 or DNS address of a COPS Server. Note that,
+        since this is an index to the table, the DNS name must be
+        short enough to fit into the maximum length of indices allowed
+        by the management protocol in use."
+    REFERENCE
+        "RFC 2748 section 2.3"
+    ::= { copsClientServerConfigEntry 2 }
+
+copsClientServerConfigClientType OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The COPS protocol Client-Type for which this entry
+        applies and for which this COPS server is capable
+        of serving. Multiple Client-Types can be served by a
+        single COPS server."
+    REFERENCE
+        "RFC 2748 section 6, IANA"
+    ::= { copsClientServerConfigEntry 3 }
+
+copsClientServerConfigAuthType OBJECT-TYPE
+    SYNTAX      CopsAuthType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The type of authentication mechanism for this COPS client
+        to request when negotiating security at the start of a
+        connection to a COPS server."
+    REFERENCE
+        "RFC 2748 section 4."
+    ::= { copsClientServerConfigEntry 4 }
+
+copsClientServerConfigTcpPort OBJECT-TYPE
+    SYNTAX      CopsTcpPort
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The TCP port number on the COPS server to which the
+        client should connect."
+    ::= { copsClientServerConfigEntry 5 }
+
+copsClientServerConfigPriority OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The priority of this entry relative to other entries.
+        COPS client will attempt to contact COPS servers for the
+        appropriate Client-Type. Higher numbers are tried first. The
+        order to be used amongst server entries with the same priority
+        is undefined. COPS servers that are notified to the client using
+        the COPS protocol PDP-Redirect mechanism are always used in
+        preference to any entries in this table."
+    ::= { copsClientServerConfigEntry 6 }
+
+copsClientServerConfigRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "State of this entry in the table."
+    ::= { copsClientServerConfigEntry 7 }
+
+copsClientServerConfigRetryAlgrm OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    sequential(2),
+                    roundRobin(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The algorithm by which the client should retry when it
+         fails to connect to a COPS server."
+    DEFVAL { sequential }
+    ::= { copsClientConfigGroup 2 }
+
+copsClientServerConfigRetryCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "A retry count for use by the retry algorithm.  Each retry
+         algorithm needs to specify how it uses this value.
+
+         For the 'sequential(2)' algorithm, this value is the
+         number of times the client should retry to connect
+         to one COPS server before moving on to another.
+         For the 'roundRobin(3)' algorithm, this value is not used."
+    DEFVAL { 1 }
+    ::= { copsClientConfigGroup 3 }
+
+copsClientServerConfigRetryIntvl OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "A retry interval for use by the retry algorithm.  Each retry
+         algorithm needs to specify how it uses this value.
+
+         For the 'sequential(2)' algorithm, this value is the time to
+         wait between retries of a connection to the same COPS server.
+
+         For the 'roundRobin(3)' algorithm, the client always attempts
+         to connect to each Server in turn, until one succeeds or they
+         all fail; if they all fail, then the client waits for the value
+         of this interval before restarting the algorithm."
+    DEFVAL { 1000 }
+    ::= { copsClientConfigGroup 4 }
+
+-- -------------------------------------------------------------
+-- Conformance Information
+-- -------------------------------------------------------------
+
+copsClientConformance OBJECT IDENTIFIER ::= { copsClientMIB 2 }
+
+copsClientGroups OBJECT IDENTIFIER ::= { copsClientConformance 1 }
+copsClientCompliances OBJECT IDENTIFIER ::= { copsClientConformance 2 }
+
+-- -------------------------------------------------------------
+-- units of conformance
+-- -------------------------------------------------------------
+
+copsDeviceStatusGroup OBJECT-GROUP
+    OBJECTS {
+        copsClientCapabilities,
+        copsClientServerTcpPort, copsClientServerType,
+        copsClientServerAuthType, copsClientServerLastConnAttempt,
+        copsClientState, copsClientServerKeepaliveTime,
+        copsClientServerAccountingTime, copsClientInPkts,
+        copsClientOutPkts, copsClientInErrs, copsClientLastError,
+        copsClientTcpConnectAttempts, copsClientTcpConnectFailures,
+        copsClientOpenAttempts, copsClientOpenFailures,
+        copsClientErrUnsupportClienttype,
+        copsClientErrUnsupportedVersion, copsClientErrLengthMismatch,
+        copsClientErrUnknownOpcode, copsClientErrUnknownCnum,
+        copsClientErrBadCtype, copsClientErrBadSends,
+        copsClientErrWrongObjects, copsClientErrWrongOpcode,
+        copsClientKaTimedoutClients, copsClientErrAuthFailures,
+        copsClientErrAuthMissing
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects for monitoring the status of
+        connections to COPS servers and statistics for a COPS client."
+    ::= { copsClientGroups 1 }
+
+copsDeviceConfigGroup OBJECT-GROUP
+    OBJECTS {
+        copsClientServerConfigTcpPort, copsClientServerConfigPriority,
+        copsClientServerConfigRowStatus,
+        copsClientServerConfigRetryAlgrm,
+        copsClientServerConfigRetryCount,
+        copsClientServerConfigRetryIntvl
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects for configuring COPS server
+
+        information."
+    ::= { copsClientGroups 2 }
+
+-- -------------------------------------------------------------
+-- compliance statements
+-- -------------------------------------------------------------
+
+copsClientCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for device support of
+        management of the COPS client."
+
+    MODULE
+        MANDATORY-GROUPS {
+            copsDeviceStatusGroup, copsDeviceConfigGroup
+        }
+
+        OBJECT      copsClientServerConfigTcpPort
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is required only if the device supports the
+            configuration of COPS server information."
+
+        OBJECT      copsClientServerConfigPriority
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is required only if the device supports the
+            configuration of COPS server information."
+
+        OBJECT      copsClientServerConfigRowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is required only if the device supports the
+            configuration of COPS server information."
+
+        OBJECT      copsClientServerConfigRetryAlgrm
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is required only if the device supports the
+            configuration of COPS server information."
+
+        OBJECT      copsClientServerConfigRetryCount
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is required only if the device supports the
+            configuration of COPS server information."
+
+        OBJECT      copsClientServerConfigRetryIntvl
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is required only if the device supports the
+            configuration of COPS server information."
+       ::= { copsClientCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/DECNET-PHIV-MIB.mib b/snmp_builder/mibs/DECNET-PHIV-MIB.mib
new file mode 100644
index 0000000..c47b35d
--- /dev/null
+++ b/snmp_builder/mibs/DECNET-PHIV-MIB.mib
@@ -0,0 +1,3030 @@
+     DECNET-PHIV-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+        Gauge
+           FROM RFC1155-SMI
+         OBJECT-TYPE
+            FROM RFC-1212
+         mib-2, DisplayString
+           FROM RFC1213-MIB;
+
+-- DECNet Phase-IV MIB
+
+     phiv      OBJECT IDENTIFIER ::= { mib-2 18 }
+
+-- textual conventions
+
+PhivAddr ::= OCTET STRING (SIZE (2))
+-- This data type is intended as a short word representation of
+-- standard DECnet Phase IV addresses. DECnet addresses are
+-- hierarchically structured numbers assigned to a particular
+-- DECnet node. The address is structured so that the area
+-- number is contained in the most significant 6 bits of the
+-- first octet.  The next 2 bits of the first octet contain
+-- the first two bits of the host address.  The remainder of
+-- the host address is contained in the second octet.
+
+PhivCounter ::= INTEGER
+-- This data type has been created for DECnet counters.  These
+-- counters latch at their maximum specified value until either
+-- the system is restarted, or they are reset to zero by the user
+
+-- or management software.
+
+InterfaceIndex ::= INTEGER
+--  The range of ifIndex, i.e., (1..2147483647)
+
+-- groups in the decnetiv mib
+
+      phivSystem             OBJECT IDENTIFIER ::= { phiv 1 }
+      phivManagement         OBJECT IDENTIFIER ::= { phiv 2 }
+      session                OBJECT IDENTIFIER ::= { phiv 3 }
+      end                    OBJECT IDENTIFIER ::= { phiv 4 }
+      routing                OBJECT IDENTIFIER ::= { phiv 5 }
+      circuit                OBJECT IDENTIFIER ::= { phiv 6 }
+      ddcmp                  OBJECT IDENTIFIER ::= { phiv 7 }
+      control                OBJECT IDENTIFIER ::= { phiv 8 }
+      ethernet               OBJECT IDENTIFIER ::= { phiv 9 }
+      counters               OBJECT IDENTIFIER ::= { phiv 10 }
+      adjacency              OBJECT IDENTIFIER ::= { phiv 11 }
+      line                   OBJECT IDENTIFIER ::= { phiv 12 }
+      nonBroadcastLine       OBJECT IDENTIFIER ::= { phiv 14 }
+      area                   OBJECT IDENTIFIER ::= { phiv 15 }
+
+-- System Group
+
+-- The implementation of the System Group is mandatory for
+-- all systems.
+
+phivSystemState OBJECT-TYPE
+     SYNTAX INTEGER {
+         on (1),
+         off (2),
+         shut (3),
+         restricted (4)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This represents the operational state of the executor
+         node.
+         The possible states are:
+         ON          Allows logical links.
+         OFF         Allows no new links, terminates existing
+                     links, and stops routing traffic through.
+         SHUT        Allows no new logical links, does not
+                     destroy existing logical links, and goes
+                     to the OFF state when all logical links are
+                     gone.
+
+         RESTRICTED  Allows no new incoming logical links from
+                     other nodes.
+
+         NOTE: These values are incremented by one compared to
+         the standard DECnet values in order to maintain
+         compliance with RFC 1155)."
+     ::= { phivSystem 1 }
+
+phivExecIdent OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..32))
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This is a text string that describes the executor node
+         (for example, 'Research Lab').  The string is up to 32
+         characters of any type."
+     ::= { phivSystem 2 }
+
+-- Network Management Group
+
+-- The implementation of the Network Management Group is
+-- mandatory for all systems which contain a DECnet-style
+-- management version.
+
+phivMgmtMgmtVers OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..255))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This is the read-only Network Management Version,
+         consisting of the version number, the Engineering
+         Change Order (ECO) number, and the user ECO number
+         (for example, 3.0.0). This parameter applies to the
+         executor node only."
+     ::= { phivManagement 1 }
+
+-- Session Layer Group
+
+-- The implementation of the Session Layer Group is optional.
+-- A system can be said to implement this group if and only if
+-- all objects in this group are implemented.
+
+phivSessionSystemName OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..6))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Name to be associated with the node identification.
+         Only one name can be assigned to a node address or a
+         circuit identification. No name should be used more than
+         once in a DECnet network. Node-name is one to six upper
+         case alphanumeric characters with at least one alpha
+         character. A length of 0 indicates no name."
+     ::= { session 1 }
+
+phivSessionInTimer OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum duration between the
+         time a connect is received for a process at the
+         executor node and the time that process accepts or
+         rejects it. If the connect is not accepted or rejected
+         by the user within the number of seconds specified,
+         Session Control rejects it for the user.  A value of 0
+         indicates no timer is running."
+     ::= { session 2 }
+
+phivSessionOutTimer OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the duration between the time the
+         executor requests a connect and the time that connect is
+         acknowledged by the destination node. If the connect is
+         not acknowledged within the number of seconds
+         specified, Session Control returns an error.  A value of 0
+         indicates no timer is running."
+     ::= { session 3 }
+
+-- End Communication Layer Group
+
+-- The implementation of the End Communication Layer Group is optional.
+-- A system can be said to implement this group if and only if
+-- all objects in this group are implemented.
+
+-- Remote State Table
+
+phivEndRemoteTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivEndRemoteEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the state of sessions between the
+         node under study and the nodes found in the table."
+     ::= { end 1 }
+
+phivEndRemoteEntry OBJECT-TYPE
+     SYNTAX PhivEndRemoteEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about a particular remote node as seen
+         from the end communication layer."
+     INDEX  { phivEndRemoteHostNodeID }
+     ::= { phivEndRemoteTable 1 }
+
+PhivEndRemoteEntry ::=
+     SEQUENCE {
+         phivEndRemoteHostNodeID
+             PhivAddr,
+         phivEndRemoteState
+             INTEGER,
+         phivEndCircuitIndex
+             INTEGER,
+         phivEndActiveLinks
+             INTEGER,
+         phivEndDelay
+             INTEGER
+     }
+
+phivEndRemoteHostNodeID OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value is the address of the remote node to be
+         evaluated."
+     ::= { phivEndRemoteEntry 1 }
+
+phivEndRemoteState OBJECT-TYPE
+     SYNTAX INTEGER {
+         on (1),
+         off (2),
+         shut (3),
+         restricted (4)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This represents the operational state of the remote node
+
+         being evaluated.
+         The possible states are:
+
+         ON          Allows logical links.
+         OFF         Allows no new links, terminates existing
+                     links, and stops routing traffic through.
+         SHUT        Allows no new logical links, does not
+                     destroy existing logical links, and goes
+                     to the OFF state when all logical links are
+                     gone.
+         RESTRICTED  Allows no new incoming logical links from
+                     other nodes.
+
+         NOTE: These values are incremented by one compared to
+         the standard DECnet values in order to maintain
+         compliance with RFC 1155."
+     ::= { phivEndRemoteEntry 2 }
+
+phivEndCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known circuit used to
+         communicate with the remote node.  This is the same
+         value as phivCircuitIndex."
+     ::= { phivEndRemoteEntry 3 }
+
+phivEndActiveLinks OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter represents the number of active
+         logical links from the executor to the destination node."
+     ::= { phivEndRemoteEntry 4 }
+
+phivEndDelay OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter is the average round trip
+         delay in seconds to the destination node. This
+         parameter is kept on a remote node basis."
+     ::= { phivEndRemoteEntry 5 }
+
+-- End System Counter Table
+
+phivEndCountTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivEndCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the counters associated with each end
+         system that is known to the entity. These counters
+         reflect totals from the perspective of the executor
+         node."
+     ::= { end 2 }
+
+phivEndCountEntry OBJECT-TYPE
+     SYNTAX PhivEndCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about a particular session between two end
+         systems."
+     INDEX  { phivEndCountHostNodeID }
+     ::= { phivEndCountTable 1 }
+
+PhivEndCountEntry ::=
+     SEQUENCE {
+         phivEndCountHostNodeID
+             PhivAddr,
+         phivEndCountSecsLastZeroed
+             PhivCounter,
+         phivEndCountUsrBytesRec
+             PhivCounter,
+         phivEndCountUsrBytesSent
+             PhivCounter,
+         phivEndUCountUsrMessRec
+             PhivCounter,
+         phivEndCountUsrMessSent
+             PhivCounter,
+         phivEndCountTotalBytesRec
+             PhivCounter,
+         phivEndCountTotalBytesSent
+             PhivCounter,
+         phivEndCountTotalMessRec
+             PhivCounter,
+         phivEndCountTotalMessSent
+             PhivCounter,
+         phivEndCountConnectsRecd
+             PhivCounter,
+         phivEndCountConnectsSent
+             PhivCounter,
+         phivEndCountReponseTimeouts
+             PhivCounter,
+         phivEndCountRecdConnectResErrs
+             PhivCounter
+     }
+
+phivEndCountHostNodeID OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value is the address of the remote node to be
+         evaluated."
+     ::= { phivEndCountEntry 1 }
+
+phivEndCountSecsLastZeroed OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value is the number of seconds that have elapsed
+         since the counters for the node in this table row were
+         last set to zero. This counter is located in the
+         network management layer, but is returned with the
+         end system information which follows."
+     ::= { phivEndCountEntry 2 }
+
+phivEndCountUsrBytesRec OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user bytes received from the target host."
+     ::= { phivEndCountEntry 3 }
+
+phivEndCountUsrBytesSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user bytes sent to the target host."
+     ::= { phivEndCountEntry 4 }
+
+phivEndUCountUsrMessRec OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user messages received from the target host."
+     ::= { phivEndCountEntry 5 }
+
+phivEndCountUsrMessSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user messages sent to the target host."
+     ::= { phivEndCountEntry 6 }
+
+phivEndCountTotalBytesRec OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of bytes received from the target host."
+     ::= { phivEndCountEntry 7 }
+
+phivEndCountTotalBytesSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of bytes sent to the target host."
+     ::= { phivEndCountEntry 8 }
+
+phivEndCountTotalMessRec OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of messages received from the target host."
+     ::= { phivEndCountEntry 9 }
+
+phivEndCountTotalMessSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of messages sent to the target host."
+     ::= { phivEndCountEntry 10 }
+
+phivEndCountConnectsRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of connects received from the target host."
+     ::= { phivEndCountEntry 11 }
+
+phivEndCountConnectsSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of connects sent to the target host."
+     ::= {phivEndCountEntry 12 }
+
+phivEndCountReponseTimeouts OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of response timeouts."
+     ::= { phivEndCountEntry 13 }
+
+phivEndCountRecdConnectResErrs OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of received connect resource errors."
+     ::= {phivEndCountEntry 14 }
+
+-- additional End System objects
+
+phivEndMaxLinks OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum active logical
+         link count allowed for the executor."
+     ::= { end 3 }
+
+phivEndNSPVers OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..255))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter represents the version number
+         of the node End Communication S/W. The format is
+         version number, ECO, and user ECO, e.g., 4.1.0"
+     ::= { end 4 }
+
+phivEndRetransmitFactor OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of times the
+         source End Communication at the executor node will
+         restart the retransmission timer when it expires. If
+         the number is exceeded, Session Control disconnects the
+         logical link for the user."
+     ::= { end 5 }
+
+phivEndDelayFact OBJECT-TYPE
+     SYNTAX INTEGER (1..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This is the number by which to multiply one sixteenth
+         of the estimated round trip delay to a node to set the
+         retransmission timer to that node."
+     ::= { end 6 }
+
+phivEndDelayWeight OBJECT-TYPE
+     SYNTAX INTEGER (1..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This number represents the weight to apply to a
+         current round trip delay estimate to a remote node
+         when updating the estimated round trip delay to a node.
+         On some systems the number must be 1 less than a power
+         of 2 for computational efficiency."
+     ::= { end 7 }
+
+phivEndInactivityTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum duration of inactivity
+         (no data in either direction) on a logical link before
+         the node checks to see if the logical link still works.
+         If no activity occurs within the minimum number of
+         seconds, End Communication generates artificial
+         traffic to test the link (End Communication
+         specification)."
+     ::= { end 8 }
+
+phivEndCountZeroCount OBJECT-TYPE
+     SYNTAX INTEGER {
+         other (1),
+         reset (2)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "When this value is set to 2, all of the counters in
+         the End System Counter Table are set to zero."
+     ::= { end 9 }
+
+phivEndMaxLinksActive OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the high water mark for the
+         number of links that were active at any one time."
+     ::= { end 10 }
+
+-- Routing Layer Group
+
+-- The implementation of the Routing Layer Group is mandatory for
+-- all systems that implement level 1 routing layer
+-- communications.
+
+phivRouteBroadcastRouteTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value determines the maximum time in seconds
+          allowed between Routing updates on Ethernet
+          circuits. When this timer expired before a routing
+          update occurs, a routing update is forced.  With a
+          standard calculation, Routing also uses this timer
+          to enforce a minimum delay between routing updates."
+     ::= { routing 1 }
+
+phivRouteBuffSize OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter value determines the maximum size of
+          a Routing message. It therefore determines the maximum
+          size message that can be forwarded.  This size includes
+
+          protocol overhead down to and including the End
+          Communication layer, plus a constant value of 6. (This
+          value of 6 is included to provide compatibility with
+          the parameter definition in Phase III, which included
+          the Routing overhead.) It does not include Routing or
+          Data link overhead (except for the constant value of
+          6). There is one buffer size for all circuits.
+
+          NOTE: The BUFFER SIZE defines the maximum size messages
+          that the Routing layer can forward. The SEGMENT BUFFER
+          SIZE (defined below) defines the maximum size messages
+          that the End Communication layer can transmit or
+          receive. The SEGMENT BUFFER SIZE is always less than
+          or equal to the BUFFER SIZE. Normally the two
+          parameters will be equal. They may be different to
+          allow the network manager to alter buffer sizes
+          on all nodes without interruption of service. They both
+          include an extra 6 bytes for compatibility with Phase
+          III."
+     ::= { routing 2 }
+
+phivRouteRoutingVers OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..255))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter identifies the executor node's
+         Routing version number.  The format is version number,
+         ECO, and user ECO, e.g., 4.1.0"
+     ::= { routing 3 }
+
+phivRouteMaxAddr OBJECT-TYPE
+     SYNTAX INTEGER (1..1023)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the largest node number and,
+         therefore, number of nodes that can be known about
+         by the executor node's home area."
+     ::= { routing 4 }
+
+phivRouteMaxBdcastNonRouters OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum total number of
+         nonrouters the executor node can have on its Ethernet
+
+         circuits."
+     ::= { routing 5 }
+
+phivRouteMaxBdcastRouters OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum total number of
+         routers the executor node can have on its Ethernet
+         circuits."
+     ::= { routing 6 }
+
+phivRouteMaxBuffs OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of transmit
+         buffers that Routing may use for all circuits."
+     ::= { routing 7 }
+
+phivRouteMaxCircuits OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of Routing
+         circuits that the executor node can know about."
+     ::= { routing 8 }
+
+phivRouteMaxCost OBJECT-TYPE
+     SYNTAX INTEGER (1..1022)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum total path cost
+         allowed from the executor to any node within an area.
+         The path cost is the sum of the circuit costs along
+         a path between two nodes. This parameter defines the
+         point where the executor node's Routing routing
+         decision algorithm declares another node unreachable
+         because the cost of the least costly path to the
+         other node is excessive. For correct operation, this
+         parameter must not be less than the maximum path cost
+         of the network."
+     ::= { routing 9 }
+
+phivRouteMaxHops OBJECT-TYPE
+     SYNTAX INTEGER (1..30)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of routing hops
+         allowable from the executor to any other reachable node
+         within an area. (A hop is the logical distance over a
+         circuit between two adjacent nodes.) This parameter
+         defines the point where the executor node's Routing
+         routing decision algorithm declares another node
+         unreachable because the length of the shortest path
+         between the two nodes is too long. For correct
+         operation, this parameter must not be less than the
+         network diameter. (The network diameter is the
+         reachability distance between the two nodes of the
+         network having the greatest reachability distance,
+         where reachability distance is the length the shortest
+         path between a given pair of nodes.)"
+     ::= { routing 10 }
+
+phivRouteMaxVisits OBJECT-TYPE
+     SYNTAX INTEGER (1..63)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of nodes a
+         message coming into the executor node can have visited.
+         If the message is not for this node and the MAXIMUM
+         VISITS number is exceeded, the message is discarded.
+         The MAXIMUM VISITS parameter defines the point where
+         the packet lifetime control algorithm discards
+         a packet that has traversed too many nodes. For correct
+         operation, this parameter must not be less than the
+         maximum path length of the network. (The maximum path
+         length is the routing distance between the two nodes of
+         the network having the greatest routing distance, where
+         routing distance is the length of the least costly
+         path between a given pair of nodes.)"
+     ::= { routing 11 }
+
+phivRouteRoutingTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value determines the maximum time in seconds
+         allowed between Routing updates on non-Ethernet
+
+         circuits. When this timer expires before a routing
+         update occurs, a routing update is forced."
+     ::= { routing 12 }
+
+phivRouteSegBuffSize OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter value determines the maximum size of an
+         end-to-end segment. The size is a decimal integer in
+         the range 1-65535. This size is in bytes. This size
+         includes protocol overhead down to and including the
+         End Communication layer, plus a constant value of 6.
+         (This value of 6 is included to provide compatibility
+         with the BUFFER SIZE parameter definition.) It does not
+         include Routing or Data link overhead (except for the
+         constant value of 6)."
+     ::= { routing 13 }
+
+phivRouteType OBJECT-TYPE
+     SYNTAX INTEGER {
+         routing-III (1),
+         nonrouting-III (2),
+         area (3),
+         routing-IV (4),
+         nonrouting-IV (5)
+     }
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This parameter indicates the type of the executor
+         node. The node-type is one of the following:
+
+         routing-III
+         nonrouting-III
+         routing-IV
+         ronrouting-IV
+         area
+
+         A routing node has full routing capability. A
+         nonrouting node contains a subset of the Routing
+         routing modules. The III and IV indicate the DNA
+         phase of the node. Nonrouting nodes can deliver
+         and receive packets to and from any node, but cannot
+         route packets from other nodes through to other nodes.
+         An area node routes between areas. Refer to the Routing
+         specification for details.
+
+         For adjacent nodes, this is a read-only parameter that
+         indicates the type of the reachable adjacent node.
+         NOTE: The ROUTING-III and NONROUTING-III values are
+         incremented by one compared to the standard DECnet
+         values in order to maintain compliance with RFC 1155)"
+     ::= { routing 14 }
+
+phivRouteCountAgedPktLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of aged packet losses."
+     ::= { routing 15 }
+
+phivRouteCountNodeUnrPktLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of node unreachable packet losses."
+     ::= { routing 16 }
+
+phivRouteCountOutRngePktLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of node out-of-range packet losses."
+     ::= { routing 17 }
+
+phivRouteCountOverSzePktLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of Oversized packet losses."
+     ::= { routing 18 }
+
+phivRouteCountPacketFmtErr OBJECT-TYPE
+     SYNTAX PhivCounter (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of packet format errors."
+     ::= { routing 19 }
+
+phivRouteCountPtlRteUpdtLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of partial routing update losses."
+     ::= { routing 20 }
+
+phivRouteCountVerifReject OBJECT-TYPE
+     SYNTAX PhivCounter (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of verification rejects."
+     ::= { routing 21 }
+
+-- Level 1 Routing Table
+
+phivLevel1RouteTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivLevel1RouteEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the currently known DECnet Phase
+         IV Routes."
+     ::= { routing 22 }
+
+phivLevel1RouteEntry OBJECT-TYPE
+     SYNTAX PhivLevel1RouteEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the currently known DECnet Phase
+         IV Routes."
+     INDEX  { phivLevel1RouteNodeAddr }
+     ::= { phivLevel1RouteTable 1 }
+
+PhivLevel1RouteEntry ::=
+     SEQUENCE {
+         phivLevel1RouteNodeAddr
+             PhivAddr,
+         phivLevel1RouteCircuitIndex
+             INTEGER,
+         phivLevel1RouteCost
+             INTEGER,
+         phivLevel1RouteHops
+             INTEGER,
+         phivLevel1RouteNextNode
+
+             PhivAddr
+     }
+
+phivLevel1RouteNodeAddr OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value is the address of the node about which
+         routing information is contained in this level 1
+         routing table."
+     ::= { phivLevel1RouteEntry 1 }
+
+phivLevel1RouteCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known circuit. This is
+         the index to the circuit state table and is the same
+         value as phivCircuitIndex."
+     ::= { phivLevel1RouteEntry 2 }
+
+phivLevel1RouteCost OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter represents the total cost
+         over the current path to the destination node. Cost is
+         a positive integer value associated with using a
+         circuit. Routing routes messages (data) along the path
+         between two nodes with the smallest cost. COST is kept
+         on a remote node basis."
+     ::= { phivLevel1RouteEntry 3 }
+
+phivLevel1RouteHops OBJECT-TYPE
+     SYNTAX INTEGER (0..127)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter represents the number of hops
+         over to a destination node. A hop is Routing value
+         representing the logical distance between two nodes in
+         a network. HOPS is kept on a remote node basis."
+     ::= { phivLevel1RouteEntry 4 }
+
+phivLevel1RouteNextNode OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only value indicates the next node on the
+         circuit used to get to the node under scrutiny
+         (next hop)."
+     ::= { phivLevel1RouteEntry 5 }
+
+-- Additional routing parameters
+
+phivRouteCountZeroCount OBJECT-TYPE
+     SYNTAX INTEGER {
+         other (1),
+         reset (2)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "When this value is set to 2, the following objects are
+         set to Zero: phivRouteCountAgedPktLoss,
+         phivRouteCountNodeUnrPktLoss,
+         phivRouteCountOutRngePktLoss,
+         phivRouteCountOverSzePktLoss,
+         phivRouteCountPacketFmtErr,
+         phivRouteCountPtlRteUpdtLoss, and
+         phivRouteCountVerifReject."
+     ::= { routing 23 }
+
+phivRouteSystemAddr OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "DECnet Phase IV node address."
+     ::= { routing 24 }
+
+phivRouteRoutingType OBJECT-TYPE
+     SYNTAX INTEGER {
+         routing-III (1),
+         nonrouting-III (2),
+         area (3),
+         routing-IV (4),
+         nonrouting-IV (5)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This read-write parameter indicates the type of the executor
+         node. The node-type is one of the following:
+
+         routing-III
+         nonrouting-III
+         routing-IV
+         ronrouting-IV
+         area
+
+         A routing node has full routing capability. A
+         nonrouting node contains a subset of the Routing
+         routing modules. The III and IV indicate the DNA
+         phase of the node. Nonrouting nodes can deliver
+         and receive packets to and from any node, but cannot
+         route packets from other nodes through to other nodes.
+         An area node routes between areas. Refer to the Routing
+         specification for details.
+
+         For adjacent nodes, this is a read-only parameter that
+         indicates the type of the reachable adjacent node.
+         NOTE: The ROUTING-III and NONROUTING-III values are
+         incremented by one compared to the standard DECnet
+         values in order to maintain compliance with RFC 1155)"
+     ::= { routing 25 }
+
+phivRouteSystemAddress OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "DECnet Phase IV node address."
+     ::= { routing 26 }
+
+-- Circuit Group
+
+-- The implementation of the Circuit Group is mandatory for
+-- all systems.
+
+-- Circuit Parameters Table
+
+phivCircuitParametersTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivCircuitParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the parameters associated with all
+         circuits currently known."
+     ::= {circuit 1 }
+
+phivCircuitParametersEntry OBJECT-TYPE
+     SYNTAX PhivCircuitParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Parameters information about all circuits currently
+          known."
+     INDEX  { phivCircuitIndex }
+     ::= { phivCircuitParametersTable 1 }
+
+PhivCircuitParametersEntry ::=
+     SEQUENCE {
+         phivCircuitIndex
+             INTEGER,
+         phivCircuitLineIndex
+             INTEGER,
+         phivCircuitCommonState
+             INTEGER,
+         phivCircuitCommonSubState
+             INTEGER,
+         phivCircuitCommonName
+             DisplayString,
+         phivCircuitExecRecallTimer
+             INTEGER,
+         phivCircuitCommonType
+             INTEGER,
+         phivCircuitService
+             INTEGER,
+         phivCircuitExecCost
+             INTEGER,
+         phivCircuitExecHelloTimer
+             INTEGER
+    }
+
+phivCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known circuit."
+     ::= { phivCircuitParametersEntry 1 }
+
+phivCircuitLineIndex OBJECT-TYPE
+     SYNTAX InterfaceIndex
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The line on which this circuit is active.  This is
+
+          the same as the ifIndex."
+     ::= { phivCircuitParametersEntry 2 }
+
+phivCircuitCommonState OBJECT-TYPE
+     SYNTAX INTEGER {
+         on (1),
+         off (2),
+         service (3),
+         cleared (4)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the circuit's Network Management
+         operational state. NOTE: These values are incremented
+         by one compared to the standard DECnet values in order
+         to maintain compliance with RFC 1155."
+     ::= { phivCircuitParametersEntry 3 }
+
+phivCircuitCommonSubState OBJECT-TYPE
+     SYNTAX INTEGER {
+         starting (1),
+         reflecting (2),
+         looping (3),
+         loading (4),
+         dumping (5),
+         triggering (6),
+         autoservice (7),
+         autoloading (8),
+         autodumping (9),
+         autotriggering (10),
+         synchronizing (11),
+         failed (12),
+         running (13)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the circuit's Network Management
+         operational and service substate. NOTE: These values are
+         incremented by one compared to the standard DECnet values
+         in order to maintain compliance with RFC 1155."
+     ::= { phivCircuitParametersEntry 4 }
+
+phivCircuitCommonName OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..16))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The name of the circuit entry in the table, for example,
+          SVA-0 or in a level 2 router ASYNC-8 or ETHER-1)."
+     ::= { phivCircuitParametersEntry 5 }
+
+phivCircuitExecRecallTimer OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter represents the minimum number of
+         seconds to wait before restarting the circuit.  A
+         value of 0 indicates not timer is running."
+     ::= { phivCircuitParametersEntry 6 }
+
+phivCircuitCommonType OBJECT-TYPE
+     SYNTAX INTEGER {
+         ddcmp-point (1),
+         ddcmp-control (2),
+         ddcmp-tributary (3),
+         x25 (4),
+         ddcmp-dmc (5),
+         ethernet (6),
+         ci (7),
+         qp2-dte20 (8),
+         bisync (9),
+         other (14),
+         fddi (15)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Represents the type of the circuit. For X.25 circuits,
+         the value must be set to X25. For DDCMP and Ethernet
+         circuits it is read only and is the same value as the
+         protocol of the associated line.
+         NOTE: Values 1 - 5 are incremented by one compared to the
+         standard DECnet values in order to maintain compliance
+         with RFC 1155."
+     ::= { phivCircuitParametersEntry 7 }
+
+phivCircuitService  OBJECT-TYPE
+     SYNTAX INTEGER {
+         enabled (1),
+         disabled (2)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value indicates whether or not Network Management
+         allows service operations on a circuit. The values for
+         service-control are as follows:
+
+         ENABLED     SERVICE state and/or service functions are
+                     allowed.
+
+         DISABLED    SERVICE state and/or service functions are not
+                     allowed.
+
+         NOTE: These values are incremented by one compared to the
+         standard DECnet values in order to maintain compliance
+         with RFC 1155."
+     ::= { phivCircuitParametersEntry 8 }
+
+phivCircuitExecCost OBJECT-TYPE
+     SYNTAX INTEGER (1..25)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the routing cost of the circuit.
+         Routing sends messages along the path between two nodes
+         having the smallest cost."
+     ::= { phivCircuitParametersEntry 9 }
+
+phivCircuitExecHelloTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..8191)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value determines the frequency of Routing Hello
+         messages sent to the adjacent node on the circuit."
+     ::= { phivCircuitParametersEntry 10 }
+
+-- Circuit Counters Table
+
+phivCircuitCountTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivCircuitCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the counters associated with all
+         circuits currently known."
+     ::= { circuit 2 }
+
+       phivCircuitCountEntry OBJECT-TYPE
+     SYNTAX PhivCircuitCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Counter information about all circuits currently known"
+     INDEX     { phivCircuitIndex }
+     ::= { phivCircuitCountTable 1 }
+
+PhivCircuitCountEntry ::=
+     SEQUENCE {
+         phivCircuitCountSecLastZeroed
+             PhivCounter,
+         phivCircuitCountTermPacketsRecd
+             PhivCounter,
+         phivCircuitCountOriginPackSent
+             PhivCounter,
+         phivCircuitCountTermCongLoss
+             PhivCounter,
+         phivCircuitCountCorruptLoss
+             PhivCounter,
+         phivCircuitCountTransitPksRecd
+             PhivCounter,
+         phivCircuitCountTransitPkSent
+             PhivCounter,
+         phivCircuitCountTransitCongestLoss
+             PhivCounter,
+         phivCircuitCountCircuitDown
+             PhivCounter,
+         phivCircuitCountInitFailure
+             PhivCounter,
+         phivCircuitCountAdjDown
+             PhivCounter,
+         phivCircuitCountPeakAdj
+             PhivCounter,
+         phivCircuitCountBytesRecd
+             PhivCounter,
+         phivCircuitCountBytesSent
+             PhivCounter,
+         phivCircuitCountDataBlocksRecd
+             PhivCounter,
+         phivCircuitCountDataBlocksSent
+             PhivCounter,
+         phivCircuitCountUsrBuffUnav
+             PhivCounter
+     }
+
+phivCircuitCountSecLastZeroed  OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of seconds since the circuit counters for this
+         circuit were last zeroed."
+     ::= { phivCircuitCountEntry 1 }
+
+phivCircuitCountTermPacketsRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of terminating packets received on this circuit."
+     ::= { phivCircuitCountEntry 2 }
+
+phivCircuitCountOriginPackSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of originating packets sent on this circuit."
+     ::= { phivCircuitCountEntry 3 }
+
+phivCircuitCountTermCongLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of terminating congestion losses on this
+         circuit."
+     ::= { phivCircuitCountEntry 4 }
+
+phivCircuitCountCorruptLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of corruption losses on this circuit."
+     ::= { phivCircuitCountEntry 5 }
+
+phivCircuitCountTransitPksRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of Transit packets received on this circuit."
+     ::= { phivCircuitCountEntry 6 }
+
+phivCircuitCountTransitPkSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of transit packets sent on this circuit."
+     ::= { phivCircuitCountEntry 7 }
+
+phivCircuitCountTransitCongestLoss OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of transit congestion losses on this circuit."
+     ::= { phivCircuitCountEntry 8 }
+
+phivCircuitCountCircuitDown OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of circuit downs on this circuit."
+     ::= { phivCircuitCountEntry 9 }
+
+phivCircuitCountInitFailure OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of Initialization failures on this circuit."
+     ::= { phivCircuitCountEntry 10 }
+
+phivCircuitCountAdjDown OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This counter indicates the number of adjacency losses
+         that result from any of the following:
+              Node listener timeout
+              Invalid data received at node listener
+              Unexpected control (initialization or verification)
+                  message received
+              Routing message received with a checksum error
+              Node identification from a routing message or a
+              Hello message that is not the one expected Hello
+              message received indicating that connectivity
+              became one-way
+              Adjacency idled."
+     ::= { phivCircuitCountEntry 11 }
+
+phivCircuitCountPeakAdj OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This counter indicates the maximum number of nodes
+         that are up on the circuit."
+     ::= { phivCircuitCountEntry 12 }
+
+phivCircuitCountBytesRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of bytes received on this circuit."
+     ::= { phivCircuitCountEntry 13 }
+
+phivCircuitCountBytesSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of bytes sent on this circuit."
+     ::= { phivCircuitCountEntry 14 }
+
+phivCircuitCountDataBlocksRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of data blocks received on this circuit."
+     ::= { phivCircuitCountEntry 15 }
+
+phivCircuitCountDataBlocksSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of data blocks sent on this circuit."
+     ::= { phivCircuitCountEntry 16 }
+
+phivCircuitCountUsrBuffUnav OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user buffer unavailable errors."
+     ::= { phivCircuitCountEntry 17 }
+
+-- Additional Circuit Parameters
+
+phivCircuitOrigQueueLimit OBJECT-TYPE
+     SYNTAX INTEGER
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter indicates the maximum number of
+         originating packets that may be outstanding on this
+         circuit. This does not include route-thru traffic."
+     ::= { circuit 3 }
+
+phivCircuitCountZeroCount OBJECT-TYPE
+     SYNTAX INTEGER {
+         other (1),
+         reset (2)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "When this value is set to 2, all of the counters in the
+         Circuit Counter Table are set to zero."
+     ::= { circuit 4 }
+
+-- DDCMP Circuit Group
+
+-- The implementation of the DDCMP Circuit Group is optional.
+-- A system can be said to implement this group if and only if
+-- all objects in this group are implemented.
+
+-- DDCMP Parameters Table
+
+phivDDCMPCircuitParametersTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivDDCMPCircuitParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about DDCMP circuit parameters."
+     ::= { ddcmp 1}
+
+phivDDCMPCircuitParametersEntry OBJECT-TYPE
+     SYNTAX PhivDDCMPCircuitParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Parameters information about DDCMP circuits currently
+          known."
+     INDEX     { phivDDCMPCircuitIndex }
+     ::= { phivDDCMPCircuitParametersTable 1 }
+
+PhivDDCMPCircuitParametersEntry ::=
+     SEQUENCE {
+         phivDDCMPCircuitIndex
+             INTEGER,
+         phivDDCMPCircuitAdjNodeAddr
+             INTEGER,
+         phivDDCMPCircuitTributary
+             INTEGER
+     }
+
+phivDDCMPCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known DDCMP circuit.
+         This is the same value as phivCircuitIndex."
+     ::= { phivDDCMPCircuitParametersEntry 1 }
+
+phivDDCMPCircuitAdjNodeAddr OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The address of the adjacent node."
+     ::= { phivDDCMPCircuitParametersEntry 2 }
+
+phivDDCMPCircuitTributary OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the Data Link physical tributary
+         address of the circuit."
+     ::= { phivDDCMPCircuitParametersEntry 3 }
+
+-- DDCMP Circuit Counter Table
+
+phivDDCMPCircuitCountTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivDDCMPCircuitCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about the DDCMP counters associated with all
+         circuits currently known."
+     ::= { ddcmp 2 }
+
+phivDDCMPCircuitCountEntry OBJECT-TYPE
+     SYNTAX PhivDDCMPCircuitCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Counter information about DDCMP circuits now known"
+     INDEX     { phivCircuitIndex }
+     ::= { phivDDCMPCircuitCountTable 1 }
+
+PhivDDCMPCircuitCountEntry ::=
+     SEQUENCE {
+         phivDDCMPCircuitErrorsInbd
+             PhivCounter,
+         phivDDCMPCircuitErrorsOutbd
+             PhivCounter,
+         phivDDCMPCircuitRmteReplyTimeouts
+             PhivCounter,
+         phivDDCMPCircuitLocalReplyTimeouts
+             PhivCounter,
+         phivDDCMPCircuitRmteBuffErrors
+             PhivCounter,
+         phivDDCMPCircuitLocalBuffErrors
+             PhivCounter,
+         phivDDCMPCircuitSelectIntervalsElap
+             PhivCounter,
+         phivDDCMPCircuitSelectTimeouts
+             PhivCounter
+     }
+
+phivDDCMPCircuitErrorsInbd OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of Data errors inbound."
+     ::= { phivDDCMPCircuitCountEntry 1 }
+
+phivDDCMPCircuitErrorsOutbd OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of outbound data errors."
+     ::= { phivDDCMPCircuitCountEntry 2 }
+
+phivDDCMPCircuitRmteReplyTimeouts OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of remote reply timeouts."
+     ::= { phivDDCMPCircuitCountEntry 3 }
+
+phivDDCMPCircuitLocalReplyTimeouts OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of local Reply timeouts."
+     ::= { phivDDCMPCircuitCountEntry 4 }
+
+phivDDCMPCircuitRmteBuffErrors OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of remote reply time out errors."
+     ::= { phivDDCMPCircuitCountEntry 5 }
+
+phivDDCMPCircuitLocalBuffErrors  OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of local buffer errors."
+     ::= { phivDDCMPCircuitCountEntry 6 }
+
+phivDDCMPCircuitSelectIntervalsElap OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Selection intervals that have elapsed."
+     ::= {phivDDCMPCircuitCountEntry 7 }
+
+phivDDCMPCircuitSelectTimeouts OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of selection timeouts."
+     ::= {phivDDCMPCircuitCountEntry 8 }
+
+-- DDCMP Line Count Table
+
+phivDDCMPLineCountTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivDDCMPLineCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "The DDCMP Line Count Table."
+     ::= { ddcmp 3 }
+
+phivDDCMPLineCountEntry OBJECT-TYPE
+     SYNTAX PhivDDCMPLineCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "There is one entry in the table for each line."
+     INDEX  { phivDDCMPLineCountIndex }
+     ::= { phivDDCMPLineCountTable 1 }
+
+PhivDDCMPLineCountEntry ::=
+     SEQUENCE {
+         phivDDCMPLineCountIndex
+             InterfaceIndex,
+         phivDDCMPLineCountDataErrsIn
+             PhivCounter,
+         phivDDCMPLineCountRmteStationErrs
+             PhivCounter,
+         phivDDCMPLineCountLocalStationErrs
+             PhivCounter
+     }
+
+phivDDCMPLineCountIndex OBJECT-TYPE
+     SYNTAX InterfaceIndex
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The line on which this entry's equivalence is
+         effective. The interface identified by a particular
+         value of this index is the same interface as
+         identified by the same value of phivLineIndex.
+         This value is the ifIndex."
+     ::= { phivDDCMPLineCountEntry 1 }
+
+phivDDCMPLineCountDataErrsIn OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of data errors inbound."
+     ::= { phivDDCMPLineCountEntry 2 }
+
+phivDDCMPLineCountRmteStationErrs OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of remote station errors."
+     ::= { phivDDCMPLineCountEntry 3 }
+
+phivDDCMPLineCountLocalStationErrs OBJECT-TYPE
+     SYNTAX PhivCounter (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+          "Number of local station errors."
+     ::= { phivDDCMPLineCountEntry 4 }
+
+-- DDCMP Multipoint Circuit Control Group
+
+-- The implementation of the DDCMP Multipoint Circuit Control
+-- Group is optional.  A system can be said to implement this group
+-- if and only if all objects in this group are implemented.
+
+phivControlSchedTimer OBJECT-TYPE
+     SYNTAX INTEGER (50..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of milliseconds
+         between recalculation of tributary polling priorities."
+     DEFVAL { 200 }
+     ::= { control 1 }
+
+phivControlDeadTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of milliseconds
+         between polls of one of the set of dead
+         tributaries."
+     DEFVAL { 10000 }
+     ::= { control 2 }
+
+phivControlDelayTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the minimum number of
+         milliseconds to delay between polls. The delay timer
+         limits the effect of a very fast control station on
+         slow tributaries."
+     ::= { control 3 }
+
+phivControlStreamTimer OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of milliseconds a
+         tributary or a half duplex remote station is
+         allowed to hold the line.
+
+         NOTE: This parameter can also be applied to
+         half-duplex lines of type DDCMP POINT."
+     DEFVAL { 6000 }
+     ::= { control 4 }
+
+-- DDCMP Multipoint Circuit Control Parameters Table
+
+phivControlParametersTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivControlParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about control circuit parameters."
+     ::= { control 5 }
+
+phivControlParametersEntry OBJECT-TYPE
+     SYNTAX PhivControlParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Parameters information about control circuits
+         currently known."
+     INDEX  { phivControlCircuitIndex }
+     ::= { phivControlParametersTable 1 }
+
+PhivControlParametersEntry ::=
+     SEQUENCE {
+         phivControlCircuitIndex
+             INTEGER,
+         phivControlBabbleTimer
+             INTEGER,
+         phivControlMaxBuffs
+             INTEGER,
+         phivControlMaxTransmits
+             INTEGER,
+         phivControlDyingBase
+             INTEGER,
+         phivControlDyingIncrement
+             INTEGER,
+         phivControlDeadThreshold
+             INTEGER,
+         phivControlDyingThreshold
+             INTEGER,
+         phivControlInactTreshold
+             INTEGER,
+         phivControlPollingState
+             INTEGER,
+         phivControlPollingSubState
+             INTEGER,
+         phivControlTransTimer
+             INTEGER
+     }
+
+phivControlCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known multipoint
+         control circuit.
+         This is the same value as phivCircuitIndex."
+     ::= { phivControlParametersEntry 1 }
+
+phivControlBabbleTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of milliseconds that a
+         selected tributary or remote half-duplex station is
+         allowed to transmit."
+     DEFVAL { 6000 }
+     ::= { phivControlParametersEntry 2 }
+
+phivControlMaxBuffs  OBJECT-TYPE
+     SYNTAX INTEGER (1..254)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of buffers the
+         tributary can use from a common buffer pool. If not
+         set, there is no common buffer pool and buffers are
+         explicitly supplied by the higher level. Count is a
+         decimal integer in the range 1-254."
+     ::= { phivControlParametersEntry 3 }
+
+phivControlMaxTransmits  OBJECT-TYPE
+     SYNTAX INTEGER (1..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of data
+         messages that can be transmitted at one time. Count
+         is a decimal integer in the range 1-255."
+     DEFVAL { 4 }
+     ::= { phivControlParametersEntry 4 }
+
+phivControlDyingBase OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the base priority to which a
+         tributary is reset each time it has been polled. A
+         separate base can be set for each of the indicated
+         polling states. Base is a decimal integer in the range
+         0-255.  If not set, the defaults are: active, 255;
+         inactive, 0; and dying, 0."
+     ::= { phivControlParametersEntry 5 }
+
+phivControlDyingIncrement OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the increment added to the
+         tributary priority each time the scheduling timer
+         expires.  If not set, the defaults are: active, 0;
+         inactive, 64; and dying, 16."
+     ::= { phivControlParametersEntry 6 }
+
+phivControlDeadThreshold OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of times to poll the
+         active, inactive, or dying tributary before changing
+         its polling state to dead because of receive timeouts.
+         Count is a decimal integer in the range 0-255."
+     DEFVAL { 8 }
+     ::= { phivControlParametersEntry 7 }
+
+phivControlDyingThreshold OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of times to poll the
+         active or inactive tributary before changing its
+         polling state to dying because of receive timeouts.
+         Count is a decimal integer in the range 0-255."
+     DEFVAL { 2 }
+     ::= { phivControlParametersEntry 8 }
+
+phivControlInactTreshold OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of times to poll the
+         active tributary before changing its polling state to
+         inactive because of no data response. Count is a
+         decimal integer in the range
+         0-255."
+     DEFVAL { 8 }
+     ::= { phivControlParametersEntry 9 }
+
+phivControlPollingState OBJECT-TYPE
+     SYNTAX INTEGER {
+         automatic (1),
+         active (2),
+         inactive (3),
+         dying (4),
+         dead (5)
+     }
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the state of the tributary
+         relative to the multipoint polling algorithm.  If not
+         set the default is AUTOMATIC. The possible states are:
+
+         AUTOMATIC
+
+           The tributary's state is allowed to vary according to
+           the operation of the polling algorithm.
+
+         ACTIVE/INACTIVE/DYING/DEAD
+
+           The tributary is locked in the specified state.
+
+          NOTE: These values are incremented by one compared to
+          the standard DECnet values in order to maintain
+          compliance with RFC 1155."
+     ::= { phivControlParametersEntry 10 }
+
+phivControlPollingSubState OBJECT-TYPE
+     SYNTAX INTEGER {
+         active (1),
+         inactive (2),
+         dying (3),
+         dead (4)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the tributary's state as
+         determined by the polling algorithm.  This applies
+         only when the polling state is AUTOMATIC and is
+         read-only to Network Management.  Polling-substate is
+         one of ACTIVE, INACTIVE, DYING, or DEAD.  It is
+         displayed as a tag on the polling state, for example:
+         AUTOMATIC-INACTIVE."
+     ::= { phivControlParametersEntry 11 }
+
+phivControlTransTimer OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of milliseconds to
+         delay between data message transmits. Milliseconds is
+         a decimal integer in the range 0-65535."
+     DEFVAL { 0 }
+     ::= { phivControlParametersEntry 12 }
+
+-- Ethernet Group
+
+-- The implementation of the Ethernet Group is mandatory
+-- for all systems which support ethernet links.
+
+-- Ethernet Parameters Table
+
+phivEthLinkParametersTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivEthLinkParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+          "Information about ethernet link parameters."
+     ::= { ethernet 1}
+
+phivEthLinkParametersEntry OBJECT-TYPE
+     SYNTAX PhivEthLinkParametersEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Parameter information about ethernet links currently
+         known."
+     INDEX     { phivEthLinkIndex }
+     ::= { phivEthLinkParametersTable 1 }
+
+PhivEthLinkParametersEntry ::=
+     SEQUENCE {
+         phivEthLinkIndex
+             INTEGER,
+         phivEthDesigRouterNodeAddr
+             PhivAddr,
+         phivEthMaxRouters
+             INTEGER,
+         phivEthRouterPri
+             INTEGER,
+         phivEthHardwareAddr
+             OCTET STRING
+      }
+
+phivEthLinkIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The circuit over which this links information is
+         collected.  This is the same as phivCircuitIndex."
+     ::= { phivEthLinkParametersEntry 1 }
+
+phivEthDesigRouterNodeAddr OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value is the address of the designated router."
+     ::= { phivEthLinkParametersEntry 2 }
+
+phivEthMaxRouters OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter is the maximum number of routers (other
+          than the executor itself) allowed on the circuit by
+          Routing for circuits that are owned by the executor
+          node."
+     ::= { phivEthLinkParametersEntry 3 }
+
+phivEthRouterPri OBJECT-TYPE
+     SYNTAX INTEGER (0..127)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter is the priority that this router is to
+          have in the selection of designated router for the
+          circuit on circuits that are owned by the executor
+          node."
+     DEFVAL { 64 }
+     ::= { phivEthLinkParametersEntry 4 }
+
+phivEthHardwareAddr OBJECT-TYPE
+     SYNTAX OCTET STRING (SIZE (6))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter is the address that is
+         associated with the line device hardware as seen by
+         the DECnet Software.  This value is not the same as
+         ifPhysAddress."
+     ::= { phivEthLinkParametersEntry 5 }
+
+-- Counters Group
+
+-- The implementation of the Counters Group is optional.
+-- A system can be said to implement this group if and only if
+-- all objects in this group are implemented.
+
+-- Counters Table
+
+phivCountersCountTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivCountersCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Information about ethernet link counters."
+     ::= { counters 1 }
+
+phivCountersCountEntry OBJECT-TYPE
+     SYNTAX PhivCountersCountEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Counter information about ethernet links currently
+         known."
+     INDEX     { phivCountersIndex }
+     ::= { phivCountersCountTable 1 }
+
+PhivCountersCountEntry ::=
+     SEQUENCE {
+         phivCountersIndex
+             InterfaceIndex,
+         phivCountersCountBytesRecd
+             PhivCounter,
+         phivCountersCountBytesSent
+             PhivCounter,
+         phivCountersCountDataBlocksRecd
+             PhivCounter,
+         phivCountersCountDataBlocksSent
+             PhivCounter,
+         phivCountersCountEthUsrBuffUnav
+             PhivCounter,
+         phivCountersCountMcastBytesRecd
+             PhivCounter,
+         phivCountersCountDataBlksRecd
+             PhivCounter,
+         phivCountersCountDataBlksSent
+             PhivCounter,
+         phivCountersCountMcastBlksRecd
+             PhivCounter,
+         phivCountersCountBlksSentDef
+             PhivCounter,
+         phivCountersCountBlksSentSingleCol
+             PhivCounter,
+         phivCountersCountBlksSentMultCol
+             PhivCounter,
+         phivCountersCountSendFailure
+             PhivCounter,
+         phivCountersCountCollDetectFailure
+             PhivCounter,
+         phivCountersCountReceiveFailure
+             PhivCounter,
+         phivCountersCountUnrecFrameDest
+             PhivCounter,
+         phivCountersCountDataOver
+             PhivCounter,
+         phivCountersCountSysBuffUnav
+             PhivCounter,
+         phivCountersCountUsrBuffUnav
+             PhivCounter
+      }
+
+phivCountersIndex OBJECT-TYPE
+     SYNTAX InterfaceIndex
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The interface to which these counters apply.  This is
+         the same interface as identified by the same value of
+         phivLineIndex. This value is the ifIndex."
+     ::= { phivCountersCountEntry 1 }
+
+phivCountersCountBytesRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of bytes received over this link."
+     ::= { phivCountersCountEntry 2 }
+
+phivCountersCountBytesSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of bytes sent over this link."
+     ::= { phivCountersCountEntry 3 }
+
+phivCountersCountDataBlocksRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "Number of data blocks received over this link."
+     ::= { phivCountersCountEntry 4 }
+
+phivCountersCountDataBlocksSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "Number of data blocks sent over this link."
+     ::= { phivCountersCountEntry 5 }
+
+phivCountersCountEthUsrBuffUnav OBJECT-TYPE
+     SYNTAX PhivCounter (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user buffer unavailable errors over this
+         link."
+     ::= { phivCountersCountEntry 6 }
+
+phivCountersCountMcastBytesRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of multicast bytes received over this link."
+     ::= { phivCountersCountEntry 7 }
+
+phivCountersCountDataBlksRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of data blocks received over this link."
+     ::= { phivCountersCountEntry 8 }
+
+phivCountersCountDataBlksSent OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of data blocks sent over this link."
+     ::= { phivCountersCountEntry 9 }
+
+phivCountersCountMcastBlksRecd OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of multicast blocks received over this link."
+     ::= { phivCountersCountEntry 10 }
+
+phivCountersCountBlksSentDef OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of blocks sent, initially deferred over this
+         link."
+     ::= { phivCountersCountEntry 11 }
+
+phivCountersCountBlksSentSingleCol OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of blocks sent, single collision over this link."
+     ::= { phivCountersCountEntry 12 }
+
+phivCountersCountBlksSentMultCol OBJECT-TYPE
+     SYNTAX PhivCounter (0..2147483647)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of blocks sent, multiple collisions over this
+         link."
+     ::= { phivCountersCountEntry 13 }
+
+phivCountersCountSendFailure OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of send failures over this link."
+     ::= { phivCountersCountEntry 14 }
+
+phivCountersCountCollDetectFailure OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of collision detect check failures over this
+          link."
+     ::= { phivCountersCountEntry 15 }
+
+phivCountersCountReceiveFailure OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of receive failures over this link."
+     ::= { phivCountersCountEntry 16 }
+
+phivCountersCountUnrecFrameDest OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of unrecognized frame destinations over this
+         link."
+     ::= { phivCountersCountEntry 17 }
+
+phivCountersCountDataOver OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of data overruns over this link."
+     ::= { phivCountersCountEntry 18 }
+
+phivCountersCountSysBuffUnav OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of system buffer unavailables over this link."
+     ::= { phivCountersCountEntry 19 }
+
+phivCountersCountUsrBuffUnav OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Number of user buffer unavailables."
+     ::= { phivCountersCountEntry 20 }
+
+-- Adjacency Group
+
+-- The implementation of the Adjacency Group is mandatory for all
+-- conformant implementations of this memo.
+
+-- The phivAdjTable has been made obsolete it has been replaced with
+-- the phivAdjNodeTable.
+
+phivAdjTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivAdjEntry
+     ACCESS not-accessible
+     STATUS obsolete
+     DESCRIPTION
+         "The Adjacency Table."
+     ::= { adjacency 1 }
+
+phivAdjEntry OBJECT-TYPE
+     SYNTAX PhivAdjEntry
+     ACCESS not-accessible
+     STATUS obsolete
+     DESCRIPTION
+         "There is one entry in the table for each adjacency."
+     INDEX  { phivAdjCircuitIndex }
+     ::= { phivAdjTable 1 }
+
+PhivAdjEntry ::=
+     SEQUENCE {
+         phivAdjCircuitIndex
+             INTEGER,
+         phivAdjNodeAddr
+             PhivAddr,
+         phivAdjBlockSize
+             INTEGER,
+         phivAdjListenTimer
+             INTEGER (1..65535),
+         phivAdjCircuitEtherServPhysAddr
+             OCTET STRING,
+         phivAdjType
+             INTEGER,
+         phivAdjState
+             INTEGER,
+         phivAdjPriority
+             INTEGER,
+         phivAdjExecListenTimer
+             INTEGER (1..65535)
+      }
+phivAdjCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "A unique index value for each known circuit."
+     ::= { phivAdjEntry 1 }
+
+phivAdjNodeAddr OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "The address of the adjacent node."
+     ::= { phivAdjEntry 2 }
+
+phivAdjBlockSize OBJECT-TYPE
+     SYNTAX INTEGER
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This read-only parameter is the block size that was
+         negotiated with the adjacent Routing layer during Routing
+         initialization over a particular circuit. It includes the
+         routing header, but excludes the data link header. This
+         parameter is qualified by ADJACENT NODE."
+     ::= { phivAdjEntry 3 }
+
+phivAdjListenTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This value determines the maximum number of seconds
+         allowed to elapse before Routing receives some message
+         (either a Hello message or a user message) from the
+         adjacent node on the circuit. It was agreed during
+         Routing initialization with the adjacent Routing layer.
+         This parameter is qualified by ADJACENT NODE."
+     ::= { phivAdjEntry 4 }
+
+phivAdjCircuitEtherServPhysAddr OBJECT-TYPE
+     SYNTAX OCTET STRING ( SIZE (6) )
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This parameter indicates the Ethernet physical address
+         of an adjacent node that is being serviced on this
+         circuit. This parameter is a qualifier for SERVICE
+         SUBSTATE."
+     ::= { phivAdjEntry 5 }
+
+phivAdjType OBJECT-TYPE
+     SYNTAX INTEGER {
+         routing-III (1),
+         nonrouting-III (2),
+         area (3),
+         routing-IV (4),
+         nonrouting-IV (5)
+     }
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This parameter indicates the type of adjacency.
+
+         For adjacent nodes, this is a read-only parameter that
+         indicates the type of the reachable adjacent node.
+         NOTE: The routing-III and nonrouting-III values are
+         incremented by one compared to the standard DECnet
+         values in order to maintain compliance with RFC 1155)"
+     ::= { phivAdjEntry 6 }
+
+phivAdjState OBJECT-TYPE
+     SYNTAX INTEGER {
+         initializing (1),          -- Ethernet one-way
+         up (2),                    -- Ethernet two-way
+         run (3),                   -- The eight DDCMP/X.25 states
+         circuit-rejected (4),
+         data-link-start (5),
+         routing-layer-initialize (6),
+         routing-layer-verify (7),
+         routing-layer-complete (8),
+         off (9),
+         halt (10)
+     }
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This value indicates the state of a router adjacency.
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) Ethernet, CI, or FDDI, with an
+         adjacent node of type (phivAdjType) ROUTING IV or AREA,
+         this variable is the state of the Ethernet
+         Initialization Layer for this adjacency, and can have
+         values INITIALIZING or UP. (See Section 9.1.1 of
+         DECnet Phase IV Routing Layer Functional Specification.)
+
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) Ethernet, CI, or FDDI, with an
+         adjacent node of type (phivAdjType) NONROUTING IV,
+         this variable will always take on the value UP.
+
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) DDCMP POINT, DDCMP CONTROL,
+         DDCMP TRIBUTARY, DDCMP DMC, or X.25, this variable is
+         the state of the Routing Layer Initialization Circuit
+         State. (See section 7.3, ibid.)  It can have values
+         between RUN and HALT.
+
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) OTHER, this variable may be
+
+         used in a manner consistent with the Initialization
+         Layer used on that circuit."
+     ::= { phivAdjEntry 7 }
+
+phivAdjPriority OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "Priority assigned by the adjacent node for this
+         circuit."
+  ::= { phivAdjEntry 8 }
+
+phivAdjExecListenTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS obsolete
+     DESCRIPTION
+         "This read-only value determines the maximum number of
+         seconds allowed to elapse before Routing receives some
+         message (either a Hello message or a user message) from
+         the adjacent node on the circuit. It was agreed during
+         Routing initialization with the adjacent Routing layer."
+     ::= { phivAdjEntry 9 }
+
+-- New Adjacency Table this replaces the phivAdjTable.
+
+phivAdjNodeTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivAdjNodeEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "The Adjacent Node Table."
+     ::= { adjacency 2 }
+
+phivAdjNodeEntry OBJECT-TYPE
+     SYNTAX PhivAdjNodeEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "There is one entry in the table for each adjacency."
+     INDEX  { phivAdjNodeCircuitIndex, phivAdjAddr }
+     ::= { phivAdjNodeTable 1 }
+
+PhivAdjNodeEntry ::=
+     SEQUENCE {
+         phivAdjNodeCircuitIndex
+             INTEGER,
+         phivAdjAddr
+             PhivAddr,
+         phivAdjNodeBlockSize
+             INTEGER,
+         phivAdjNodeListenTimer
+             INTEGER,
+         phivAdjNodeCircuitEtherServPhysAddr
+             OCTET STRING,
+         phivAdjNodeType
+             INTEGER,
+         phivAdjNodeState
+             INTEGER,
+         phivAdjNodePriority
+             INTEGER
+      }
+
+phivAdjNodeCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known circuit.  This
+         value is the same as phivCircuitIndex and identifies the
+         circuit over which the adjacency is realized."
+     ::= { phivAdjNodeEntry 1 }
+
+phivAdjAddr OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The address of the adjacent node."
+     ::= { phivAdjNodeEntry 2 }
+
+phivAdjNodeBlockSize OBJECT-TYPE
+     SYNTAX INTEGER
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This read-only parameter is the block size that was
+         negotiated with the adjacent Routing layer during Routing
+         initialization over a particular circuit. It includes the
+         routing header, but excludes the data link header. This
+         parameter is qualified by ADJACENT NODE."
+     ::= { phivAdjNodeEntry 3 }
+
+phivAdjNodeListenTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value determines the maximum number of seconds
+         allowed to elapse before Routing receives some message
+         (either a Hello message or a user message) from the
+         adjacent node on the circuit. It was agreed during
+         Routing initialization with the adjacent Routing layer.
+         This parameter is qualified by ADJACENT NODE."
+     ::= { phivAdjNodeEntry 4 }
+
+phivAdjNodeCircuitEtherServPhysAddr OBJECT-TYPE
+     SYNTAX OCTET STRING (SIZE (6))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter indicates the Ethernet physical address
+         of an adjacent node that is being serviced on this
+         circuit. This parameter is a qualifier for SERVICE
+         SUBSTATE."
+     ::= { phivAdjNodeEntry 5 }
+
+phivAdjNodeType OBJECT-TYPE
+     SYNTAX INTEGER {
+         routing-III (1),
+         nonrouting-III (2),
+         area (3),
+         routing-IV (4),
+         nonrouting-IV (5)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This parameter indicates the type of adjacency.
+
+         For adjacent nodes, this is a read-only parameter that
+         indicates the type of the reachable adjacent node.
+         NOTE: The routing-III and nonrouting-III values are
+         incremented by one compared to the standard DECnet
+         values in order to maintain compliance with RFC 1155)"
+     ::= { phivAdjNodeEntry 6 }
+
+phivAdjNodeState OBJECT-TYPE
+     SYNTAX INTEGER {
+         initializing (1),          -- Ethernet one-way
+         up (2),                    -- Ethernet two-way
+         run (3),                   -- The eight DDCMP/X.25 states
+         circuit-rejected (4),
+         data-link-start (5),
+         routing-layer-initialize (6),
+         routing-layer-verify (7),
+         routing-layer-complete (8),
+         off (9),
+         halt (10)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value indicates the state of a router adjacency.
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) Ethernet, CI, or FDDI, with an
+         adjacent node of type (phivAdjNodeType) ROUTING IV or AREA,
+         this variable is the state of the Ethernet
+         Initialization Layer for this adjacency, and can have
+         values INITIALIZING or UP. (See Section 9.1.1 of
+         DECnet Phase IV Routing Layer Functional Specification.)
+
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) Ethernet, CI, or FDDI, with an
+         adjacent node of type (phivAdjNodeType) NONROUTING IV,
+         this variable will always take on the value UP.
+
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) DDCMP POINT, DDCMP CONTROL,
+         DDCMP TRIBUTARY, DDCMP DMC, or X.25, this variable is
+         the state of the Routing Layer Initialization Circuit
+         State. (See section 7.3, ibid.)  It can have values
+         between RUN and HALT.
+
+         On adjacencies over a circuit of type
+         (phivCircuitCommonType) OTHER, this variable may be
+         used in a manner consistent with the Initialization
+         Layer used on that circuit."
+     ::= { phivAdjNodeEntry 7 }
+
+phivAdjNodePriority OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "Priority assigned by the adjacent node for this
+         circuit."
+        ::= { phivAdjNodeEntry 8 }
+
+-- Line Group
+
+-- The implementation of the Line Group is mandatory for all
+-- conformant implementations of this memo.
+
+phivLineTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivLineEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "The Line Table."
+     ::= { line 1 }
+
+phivLineEntry OBJECT-TYPE
+     SYNTAX PhivLineEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "There is one entry in the table for each line."
+     INDEX  { phivLineIndex }
+     ::= { phivLineTable 1 }
+
+PhivLineEntry ::=
+     SEQUENCE {
+         phivLineIndex
+             InterfaceIndex,
+         phivLineName
+             DisplayString,
+         phivLineState
+             INTEGER,
+         phivLineSubstate
+             INTEGER,
+         phivLineService
+             INTEGER,
+         phivLineDevice
+             DisplayString,
+         phivLineReceiveBuffs
+             INTEGER,
+         phivLineProtocol
+             INTEGER,
+         phivLineServiceTimer
+             INTEGER,
+         phivLineMaxBlock
+             INTEGER
+     }
+
+phivLineIndex OBJECT-TYPE
+     SYNTAX InterfaceIndex
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The line on which this entry's equivalence is effective.
+         This is the same as the ifIndex."
+     ::= { phivLineEntry 1 }
+
+phivLineName OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..16))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The name of the line on this row of the table."
+     ::= { phivLineEntry 2 }
+
+phivLineState OBJECT-TYPE
+     SYNTAX INTEGER {
+         on (1),
+         off (2),
+         service (3),
+         cleared (4)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents Network Management operational
+         state.
+         NOTE that these values are incremented by one compared to
+         the standard DECnet values."
+     ::= { phivLineEntry 3 }
+
+phivLineSubstate OBJECT-TYPE
+     SYNTAX INTEGER {
+         starting (1),
+         reflecting (2),
+         looping (3),
+         loading (4),
+         dumping (5),
+         triggering (6),
+         auto-service (7),
+         auto-loading (8),
+         auto-dumping (9),
+         auto-triggering (10),
+         synchronizing (11),
+         failed (12),
+         running (13)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the line's read-only Network
+         Management substate.
+         NOTE that these values are incremented by one compared to
+         the standard DECnet values."
+     ::= { phivLineEntry 4 }
+
+phivLineService OBJECT-TYPE
+     SYNTAX INTEGER {
+         starting (1),
+         reflecting (2),
+         looping (3),
+         other (4)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the line's read-only Network
+         Management service.
+         NOTE that these values are incremented by one compared to
+         the standard DECnet values and OTHER is a new addition."
+     ::= { phivLineEntry 5 }
+
+phivLineDevice OBJECT-TYPE
+     SYNTAX DisplayString (SIZE (0..16))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the Physical Link device to be
+         used on the line."
+     ::= { phivLineEntry 6 }
+
+phivLineReceiveBuffs OBJECT-TYPE
+     SYNTAX INTEGER (0..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the number of receive buffers
+         reserved for the line. It is a decimal number in
+         the range 0-65535.  0 is supported for those vendors
+         that do not reserve buffers on a per line basis and
+         use a pool of buffers that can be used by any line."
+     ::= { phivLineEntry 7 }
+
+phivLineProtocol OBJECT-TYPE
+     SYNTAX INTEGER {
+         ddcmp-point (1),
+         ddcmp-control (2),
+         ddcmp-tributary (3),
+         reserved (4),
+         ddcmp-dmc (5),
+         olapb (6),
+         ethernet (7),
+         ci (8),
+         qp2 (9),
+         other (14),
+         fddi (15)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the protocol used on the line
+         device.  Note that these values are incremented by
+         one compared to the standard DECnet values."
+     ::= { phivLineEntry 8 }
+
+phivLineServiceTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the amount of time in
+         milliseconds allowed to elapse before a Data Link
+         receive request completes while doing service
+         operations."
+     ::= { phivLineEntry 9 }
+
+phivLineMaxBlock OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the Data Link maximum block
+         size on the line."
+     ::= { phivLineEntry 10 }
+
+-- Non Broadcast Line Group
+
+-- The implementation of the Non Broadcast Line Group is optional.
+-- A system can be said to implement this group if and only if
+-- all objects in this group are implemented.
+
+phivNonBroadcastTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivNonBroadcastEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "The Non Broadcast Table."
+     ::= { nonBroadcastLine 1 }
+
+phivNonBroadcastEntry OBJECT-TYPE
+     SYNTAX PhivNonBroadcastEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "There is one entry in the table for each
+         Non Broadcast line."
+     INDEX  { phivNonBroadcastIndex }
+     ::= { phivNonBroadcastTable 1 }
+
+PhivNonBroadcastEntry ::=
+     SEQUENCE {
+         phivNonBroadcastIndex
+             InterfaceIndex,
+         phivNonBroadcastController
+             INTEGER,
+         phivNonBroadcastDuplex
+             INTEGER,
+         phivNonBroadcastClock
+             INTEGER,
+         phivNonBroadcastRetransmitTimer
+             INTEGER
+     }
+
+phivNonBroadcastIndex OBJECT-TYPE
+     SYNTAX InterfaceIndex
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The Non Broadcast line on which this entry's
+         equivalence is effective.  This is the same value
+         as the ifIndex."
+     ::= { phivNonBroadcastEntry 1 }
+
+phivNonBroadcastController OBJECT-TYPE
+     SYNTAX INTEGER {
+         normal (1),
+         loopback (2),
+         other (3)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the Physical Link hardware
+         controller mode for the line device. The values
+         for controller-mode are:
+
+         NORMAL  For normal controller operating mode.
+
+         LOOPBACK For software controllable loopback of the
+         controller. On those devices that can support this
+         mode, it causes all transmitted messages to be looped
+         back from within the controller itself. This is
+         accomplished without any manual intervention other
+         than the setting of this parameter value.
+
+         OTHER indicates function is not supported
+         Note that these values are incremented by one compared to
+         the standard DECnet values."
+     ::= { phivNonBroadcastEntry 2 }
+
+phivNonBroadcastDuplex OBJECT-TYPE
+     SYNTAX INTEGER {
+         full (1),
+         half (2)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the Physical Link hardware
+         duplex mode of the line device. The possible modes
+         are:
+
+         FULL   Full-duplex
+         HALF   Half-duplex
+
+         Note that these values are incremented by one compared to
+         the standard DECnet values."
+     ::= { phivNonBroadcastEntry 3 }
+
+phivNonBroadcastClock OBJECT-TYPE
+     SYNTAX INTEGER {
+         external (1),
+         internal (2),
+         other (3)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the Physical Link hardware clock
+         mode for the line device. The values for clock-mode are:
+
+         INTERNAL For software controllable loopback use of
+         the clock. On those devices that can support this
+         mode, it causes the device to supply a clock signal
+         such that a transmitted messages can be looped
+         back from outside the device. This may require manual
+         intervention other than the setting of this parameter
+         value. For example, the operator may have to connect
+         a loopback plug in place of the normal line.
+
+         EXTERNAL For normal clock operating mode, where the
+         clock signal is supplied externally to the controller.
+         Note that these values are incremented by one compared to
+         the standard DECnet values."
+     ::= { phivNonBroadcastEntry 4 }
+
+phivNonBroadcastRetransmitTimer OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents number of milliseconds before
+         the Data Link retransmits a block on the line. On
+         half-duplex lines, this parameter is the select timer."
+     DEFVAL { 3000 }
+     ::= { phivNonBroadcastEntry 5 }
+
+-- Area Parameters Group
+
+-- The implementation of the Area Parameters Group is mandatory
+-- for all systems which implement level 2 routing.
+
+phivAreaTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF PhivAreaEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "Table of information kept on all areas known to
+         this unit."
+     ::= { area 1 }
+
+phivAreaEntry OBJECT-TYPE
+     SYNTAX PhivAreaEntry
+     ACCESS not-accessible
+     STATUS mandatory
+     DESCRIPTION
+         "The area routing information."
+     INDEX  { phivAreaNum }
+     ::= { phivAreaTable 1 }
+
+PhivAreaEntry ::=
+     SEQUENCE {
+         phivAreaNum
+             INTEGER,
+         phivAreaState
+             INTEGER,
+         phivAreaCost
+             Gauge,
+         phivAreaHops
+             INTEGER,
+         phivAreaNextNode
+             PhivAddr,
+         phivAreaCircuitIndex
+            INTEGER
+     }
+
+phivAreaNum OBJECT-TYPE
+     SYNTAX INTEGER (0..64)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value indicates the area number of this entry."
+     ::= { phivAreaEntry 1 }
+
+phivAreaState OBJECT-TYPE
+     SYNTAX INTEGER {
+         reachable (4),
+         unreachable (5)
+     }
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "This value indicates the state of the area"
+     ::= { phivAreaEntry 2 }
+
+phivAreaCost OBJECT-TYPE
+     SYNTAX Gauge
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The total cost over the current path to the
+          destination area. Cost is a value associated with
+          using a circuit. Routing routes messages (data)
+          along the path between 2 areas with the smallest
+          cost."
+     ::= { phivAreaEntry 3 }
+
+phivAreaHops OBJECT-TYPE
+     SYNTAX INTEGER (0..255)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The number of hops to a destination area. A hop is
+         the routing value representing the logical distance
+         between two areas in network."
+     ::= { phivAreaEntry 4 }
+
+phivAreaNextNode OBJECT-TYPE
+     SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "The next node on the circuit used to get to the
+         area under scrutiny."
+     ::= { phivAreaEntry 5 }
+
+phivAreaCircuitIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..65535)
+     ACCESS read-only
+     STATUS mandatory
+     DESCRIPTION
+         "A unique index value for each known circuit."
+     ::= { phivAreaEntry 6 }
+
+-- Additional Area Parameters
+
+phivAreaMaxCost OBJECT-TYPE
+     SYNTAX INTEGER (1..1022)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum total path cost
+         allowed from the executor to any other level 2 routing
+         node. The AREA MAXIMUM COST number is decimal in the
+         range 1-1022. This parameter is only applicable if
+         the executor node is of type AREA."
+     ::= { area 2 }
+
+phivAreaMaxHops OBJECT-TYPE
+     SYNTAX INTEGER (1..30)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the maximum number of routing hops
+
+         allowable from the executor to any other level 2
+         routing node.  This parameter is only applicable if the
+         executor node is of type AREA."
+     ::= { area 3 }
+
+phivRouteMaxArea OBJECT-TYPE
+     SYNTAX INTEGER (1..63)
+     ACCESS read-write
+     STATUS mandatory
+     DESCRIPTION
+         "This value represents the largest area number and,
+         therefore, number of areas that can be known about
+         by the executor node's Routing. This parameter is only
+         applicable if the executor node is of type AREA."
+     ::= { area 4 }
+
+       END
diff --git a/snmp_builder/mibs/DIAL-CONTROL-MIB.mib b/snmp_builder/mibs/DIAL-CONTROL-MIB.mib
new file mode 100644
index 0000000..38c42f2
--- /dev/null
+++ b/snmp_builder/mibs/DIAL-CONTROL-MIB.mib
@@ -0,0 +1,1270 @@
+DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        NOTIFICATION-TYPE,
+        OBJECT-TYPE,
+        Unsigned32
+                FROM SNMPv2-SMI
+        TEXTUAL-CONVENTION,
+        DisplayString,
+        TimeStamp,
+        RowStatus
+                 FROM SNMPv2-TC
+        MODULE-COMPLIANCE,
+        OBJECT-GROUP,
+        NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+        IANAifType
+                FROM IANAifType-MIB
+        ifOperStatus,
+        ifIndex,
+        InterfaceIndex,
+        InterfaceIndexOrZero
+                FROM IF-MIB
+        transmission
+                FROM RFC1213-MIB;
+
+dialControlMib MODULE-IDENTITY
+        LAST-UPDATED    "9609231544Z" -- Sep 23, 1996
+        ORGANIZATION    "IETF ISDN Working Group"
+        CONTACT-INFO
+            "        Guenter Roeck
+             Postal: cisco Systems
+                     170 West Tasman Drive
+                     San Jose, CA 95134
+                     U.S.A.
+             Phone:  +1 408 527 3143
+             E-mail: groeck@cisco.com"
+        DESCRIPTION
+            "The MIB module to describe peer information for
+             demand access and possibly other kinds of interfaces."
+        ::= { transmission 21 }
+
+AbsoluteCounter32 ::= TEXTUAL-CONVENTION
+        STATUS      current
+        DESCRIPTION
+            "Represents a Counter32-like value that starts at zero,
+             does not decrease, and does not wrap. This may be used
+             only in situations where wrapping is not possible or
+             extremely unlikely. Should such a counter overflow,
+             it locks at the maxium value of 4,294,967,295.
+
+             The primary use of this type of counter is situations
+             where a counter value is to be recorded as history
+             and is thus no longer subject to reading for changing
+             values."
+        SYNTAX      Unsigned32
+
+-- Dial Control Mib objects definitions
+
+dialControlMibObjects OBJECT IDENTIFIER ::= { dialControlMib 1 }
+
+-- General configuration group
+
+dialCtlConfiguration OBJECT IDENTIFIER ::= { dialControlMibObjects 1 }
+
+-- general configuration data/parameters
+
+dialCtlAcceptMode OBJECT-TYPE
+        SYNTAX INTEGER {
+            acceptNone(1),
+            acceptAll(2),
+            acceptKnown(3)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The security level for acceptance of incoming calls.
+             acceptNone(1)  - incoming calls will not be accepted
+             acceptAll(2)   - incoming calls will be accepted,
+                              even if there is no matching entry
+                              in the dialCtlPeerCfgTable
+             acceptKnown(3) - incoming calls will be accepted only
+                              if there is a matching entry in the
+                              dialCtlPeerCfgTable
+            "
+        ::= { dialCtlConfiguration 1 }
+
+dialCtlTrapEnable OBJECT-TYPE
+        SYNTAX      INTEGER {
+            enabled(1),
+            disabled(2)
+
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates whether dialCtlPeerCallInformation
+             and dialCtlPeerCallSetup traps should be generated for
+             all peers. If the value of this object is enabled(1),
+             traps will be generated for all peers. If the value
+             of this object is disabled(2), traps will be generated
+             only for peers having dialCtlPeerCfgTrapEnable set
+             to enabled(1)."
+        DEFVAL      { disabled }
+        ::= { dialCtlConfiguration 2 }
+
+-- Peer group
+
+dialCtlPeer OBJECT IDENTIFIER ::= { dialControlMibObjects 2 }
+
+-- peer configuration table
+
+dialCtlPeerCfgTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DialCtlPeerCfgEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The list of peers from which the managed device
+             will accept calls or to which it will place them."
+       ::= { dialCtlPeer 1 }
+
+dialCtlPeerCfgEntry OBJECT-TYPE
+        SYNTAX      DialCtlPeerCfgEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Configuration data for a single Peer. This entry is
+             effectively permanent, and contains information
+             to identify the peer, how to connect to the peer,
+             how to identify the peer and its permissions.
+             The value of dialCtlPeerCfgOriginateAddress must be
+             specified before a new row in this table can become
+             active(1). Any writeable parameters in an existing entry
+             can be modified while the entry is active. The modification
+             will take effect when the peer in question will be
+             called the next time.
+             An entry in this table can only be created if the
+             associated ifEntry already exists."
+        INDEX       { dialCtlPeerCfgId, ifIndex }
+      ::= { dialCtlPeerCfgTable 1 }
+
+DialCtlPeerCfgEntry ::= SEQUENCE {
+            dialCtlPeerCfgId                 INTEGER,
+            dialCtlPeerCfgIfType             IANAifType,
+            dialCtlPeerCfgLowerIf            InterfaceIndexOrZero,
+            dialCtlPeerCfgOriginateAddress   DisplayString,
+            dialCtlPeerCfgAnswerAddress      DisplayString,
+            dialCtlPeerCfgSubAddress         DisplayString,
+            dialCtlPeerCfgClosedUserGroup    DisplayString,
+            dialCtlPeerCfgSpeed              INTEGER,
+            dialCtlPeerCfgInfoType           INTEGER,
+            dialCtlPeerCfgPermission         INTEGER,
+            dialCtlPeerCfgInactivityTimer    INTEGER,
+            dialCtlPeerCfgMinDuration        INTEGER,
+            dialCtlPeerCfgMaxDuration        INTEGER,
+            dialCtlPeerCfgCarrierDelay       INTEGER,
+            dialCtlPeerCfgCallRetries        INTEGER,
+            dialCtlPeerCfgRetryDelay         INTEGER,
+            dialCtlPeerCfgFailureDelay       INTEGER,
+            dialCtlPeerCfgTrapEnable         INTEGER,
+            dialCtlPeerCfgStatus             RowStatus
+        }
+
+dialCtlPeerCfgId OBJECT-TYPE
+        SYNTAX      INTEGER (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This object identifies a single peer. There may
+             be several entries in this table for one peer,
+             defining different ways of reaching this peer.
+             Thus, there may be several entries in this table
+             with the same value of dialCtlPeerCfgId.
+             Multiple entries for one peer may be used to support
+             multilink as well as backup lines.
+             A single peer will be identified by a unique value
+             of this object. Several entries for one peer MUST
+             have the same value of dialCtlPeerCfgId, but different
+             ifEntries and thus different values of ifIndex."
+        ::= { dialCtlPeerCfgEntry 1 }
+
+dialCtlPeerCfgIfType OBJECT-TYPE
+        SYNTAX      IANAifType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The interface type to be used for calling this peer.
+
+             In case of ISDN, the value of isdn(63) is to be used."
+        DEFVAL      { other }
+        ::= { dialCtlPeerCfgEntry 2 }
+
+dialCtlPeerCfgLowerIf OBJECT-TYPE
+        SYNTAX      InterfaceIndexOrZero
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "ifIndex value of an interface the peer will have to be
+             called on. For example, on an ISDN interface, this can be
+             the ifIndex value of a D channel or the ifIndex value of a
+             B channel, whatever is appropriate for a given peer.
+             As an example, for Basic Rate leased lines it will be
+             necessary to specify a B channel ifIndex, while for
+             semi-permanent connections the D channel ifIndex has
+             to be specified.
+             If the interface can be dynamically assigned, this object
+             has a value of zero."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 3 }
+
+dialCtlPeerCfgOriginateAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Call Address at which the peer will be called.
+             Think of this as the set of characters following 'ATDT '
+             or the 'phone number' included in a D channel call request.
+
+             The structure of this information will be switch type
+             specific. If there is no address information required
+             for reaching the peer, i.e., for leased lines,
+             this object will be a zero length string."
+        ::= { dialCtlPeerCfgEntry 4 }
+
+dialCtlPeerCfgAnswerAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Calling Party Number information element, as for example
+             passed in an ISDN SETUP message by a PBX or switch,
+             for incoming calls.
+             This address can be used to identify the peer.
+             If this address is either unknown or identical
+             to dialCtlPeerCfgOriginateAddress, this object will be
+
+             a zero length string."
+        DEFVAL      { "" }
+        ::= { dialCtlPeerCfgEntry 5 }
+
+dialCtlPeerCfgSubAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Subaddress at which the peer will be called.
+             If the subaddress is undefined for the given media or
+             unused, this is a zero length string."
+        DEFVAL      { "" }
+        ::= { dialCtlPeerCfgEntry 6 }
+
+dialCtlPeerCfgClosedUserGroup OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Closed User Group at which the peer will be called.
+             If the Closed User Group is undefined for the given media
+             or unused, this is a zero length string."
+        REFERENCE
+            "Q.931, chapter 4.6.1."
+        DEFVAL      { "" }
+        ::= { dialCtlPeerCfgEntry 7 }
+
+dialCtlPeerCfgSpeed OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The desired information transfer speed in bits/second
+             when calling this peer.
+             The detailed media specific information, e.g. information
+             type and information transfer rate for ISDN circuits,
+             has to be extracted from this object.
+             If the transfer speed to be used is unknown or the default
+             speed for this type of interfaces, the value of this object
+             may be zero."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 8 }
+
+dialCtlPeerCfgInfoType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            other(1),
+            speech(2),
+            unrestrictedDigital(3),     -- 64k/s data
+            unrestrictedDigital56(4),   -- with 56k rate adaption
+            restrictedDigital(5),
+            audio31(6),                 -- 3.1 kHz audio
+            audio7(7),                  -- 7 kHz audio
+            video(8),
+            packetSwitched(9),
+            fax(10)
+        }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The Information Transfer Capability to be used when
+             calling this peer.
+
+             speech(2) refers to a non-data connection, whereas
+             audio31(6) and audio7(7) refer to data mode
+             connections."
+        DEFVAL      { other }
+        ::= { dialCtlPeerCfgEntry 9 }
+
+dialCtlPeerCfgPermission OBJECT-TYPE
+        SYNTAX      INTEGER {
+            originate(1),
+            answer(2),
+            both(3),               -- both originate & answer
+            callback(4),
+            none(5)
+        }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Applicable permissions. callback(4) either rejects the
+             call and then calls back, or uses the 'Reverse charging'
+             information element if it is available.
+             Note that callback(4) is supposed to control charging, not
+             security, and applies to callback prior to accepting a
+             call. Callback for security reasons can be handled using
+             PPP callback."
+        DEFVAL      { both }
+        ::= { dialCtlPeerCfgEntry 10 }
+
+dialCtlPeerCfgInactivityTimer OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The connection will be automatically disconnected
+             if no longer carrying useful data for a time
+             period, in seconds, specified in this object.
+             Useful data in this context refers to forwarding
+             packets, including routing information; it
+             excludes the encapsulator maintenance frames.
+             A value of zero means the connection will not be
+             automatically taken down due to inactivity,
+             which implies that it is a dedicated circuit."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 11 }
+
+dialCtlPeerCfgMinDuration OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Minimum duration of a call in seconds, starting from the
+             time the call is connected until the call is disconnected.
+             This is to accomplish the fact that in most countries
+             charging applies to units of time, which should be matched
+             as closely as possible."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 12 }
+
+dialCtlPeerCfgMaxDuration OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Maximum call duration in seconds. Zero means 'unlimited'."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 13 }
+
+dialCtlPeerCfgCarrierDelay OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The call timeout time in seconds. The default value
+             of zero means that the call timeout as specified for
+             the media in question will apply."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 14 }
+
+dialCtlPeerCfgCallRetries OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The number of calls to a non-responding address
+             that may be made. A retry count of zero means
+             there is no bound. The intent is to bound
+             the number of successive calls to an address
+             which is inaccessible, or which refuses those calls.
+
+             Some countries regulate the number of call retries
+             to a given peer that can be made."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 15 }
+
+dialCtlPeerCfgRetryDelay OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The time in seconds between call retries if a peer
+             cannot be reached.
+             A value of zero means that call retries may be done
+             without any delay."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 16 }
+
+dialCtlPeerCfgFailureDelay OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The time in seconds after which call attempts are
+             to be placed again after a peer has been noticed
+             to be unreachable, i.e. after dialCtlPeerCfgCallRetries
+             unsuccessful call attempts.
+             A value of zero means that a peer will not be called
+             again after dialCtlPeerCfgCallRetries unsuccessful call
+             attempts."
+        DEFVAL      { 0 }
+        ::= { dialCtlPeerCfgEntry 17 }
+
+dialCtlPeerCfgTrapEnable OBJECT-TYPE
+        SYNTAX      INTEGER {
+            enabled(1),
+            disabled(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object indicates whether dialCtlPeerCallInformation
+             and dialCtlPeerCallSetup traps should be generated for
+             this peer."
+        DEFVAL      { disabled }
+        ::= { dialCtlPeerCfgEntry 18 }
+
+dialCtlPeerCfgStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Status of one row in this table."
+        ::= { dialCtlPeerCfgEntry 19 }
+
+-- Peer statistics table
+
+dialCtlPeerStatsTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DialCtlPeerStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Statistics information for each peer entry.
+             There will be one entry in this table for each entry
+             in the dialCtlPeerCfgTable."
+       ::= { dialCtlPeer 2 }
+
+dialCtlPeerStatsEntry OBJECT-TYPE
+        SYNTAX      DialCtlPeerStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Statistics information for a single Peer. This entry
+             is effectively permanent, and contains information
+             describing the last call attempt as well as supplying
+             statistical information."
+        AUGMENTS    { dialCtlPeerCfgEntry }
+      ::= { dialCtlPeerStatsTable 1 }
+
+DialCtlPeerStatsEntry ::=
+        SEQUENCE {
+            dialCtlPeerStatsConnectTime          AbsoluteCounter32,
+            dialCtlPeerStatsChargedUnits         AbsoluteCounter32,
+            dialCtlPeerStatsSuccessCalls         AbsoluteCounter32,
+            dialCtlPeerStatsFailCalls            AbsoluteCounter32,
+            dialCtlPeerStatsAcceptCalls          AbsoluteCounter32,
+            dialCtlPeerStatsRefuseCalls          AbsoluteCounter32,
+            dialCtlPeerStatsLastDisconnectCause  OCTET STRING,
+            dialCtlPeerStatsLastDisconnectText   DisplayString,
+            dialCtlPeerStatsLastSetupTime        TimeStamp
+        }
+
+dialCtlPeerStatsConnectTime OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Accumulated connect time to the peer since system startup.
+             This is the total connect time, i.e. the connect time
+             for outgoing calls plus the time for incoming calls."
+        ::= { dialCtlPeerStatsEntry 1 }
+
+dialCtlPeerStatsChargedUnits OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of charging units applying to this
+             peer since system startup.
+             Only the charging units applying to the local interface,
+             i.e. for originated calls or for calls with 'Reverse
+             charging' being active, will be counted here."
+        ::= { dialCtlPeerStatsEntry 2 }
+
+dialCtlPeerStatsSuccessCalls OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of completed calls to this peer."
+        ::= { dialCtlPeerStatsEntry 3 }
+
+dialCtlPeerStatsFailCalls OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of failed call attempts to this peer since system
+             startup."
+        ::= { dialCtlPeerStatsEntry 4 }
+
+dialCtlPeerStatsAcceptCalls OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of calls from this peer accepted since system
+             startup."
+        ::= { dialCtlPeerStatsEntry 5 }
+
+dialCtlPeerStatsRefuseCalls OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Number of calls from this peer refused since system
+             startup."
+        ::= { dialCtlPeerStatsEntry 6 }
+
+dialCtlPeerStatsLastDisconnectCause OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (0..4))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The encoded network cause value associated with the last
+             call.
+             This object will be updated whenever a call is started
+             or cleared.
+             The value of this object will depend on the interface type
+             as well as on the protocol and protocol version being
+             used on this interface. Some references for possible cause
+             values are given below."
+        REFERENCE
+            "- Bellcore SR-NWT-001953, Generic Guidelines for
+               ISDN Terminal Equipment On Basic Access Interfaces,
+               chapter 5.2.5.8.
+             - Bellcore SR-NWT-002343, ISDN Primary Rate Interface
+               Generic Guidelines for Customer Premises Equipment,
+               chapter 8.2.5.8.
+             - ITU-T Q.931, Appendix I.
+             - ITU-T X.25, CAUSE and DIAGNOSTIC field values.
+             - German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4."
+        ::= { dialCtlPeerStatsEntry 7 }
+
+dialCtlPeerStatsLastDisconnectText OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "ASCII text describing the reason for the last call
+             termination.
+
+             This object exists because it would be impossible for
+             a management station to store all possible cause values
+             for all types of interfaces. It should be used only if
+             a management station is unable to decode the value of
+             dialCtlPeerStatsLastDisconnectCause.
+
+             This object will be updated whenever a call is started
+             or cleared."
+        ::= { dialCtlPeerStatsEntry 8 }
+
+dialCtlPeerStatsLastSetupTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the last call to this peer
+             was started.
+             For ISDN media, this will be the time when the setup
+             message was received from or sent to the network.
+             This object will be updated whenever a call is started
+             or cleared."
+        ::= { dialCtlPeerStatsEntry 9 }
+
+--
+-- the active call group
+--
+
+callActive OBJECT IDENTIFIER ::= { dialControlMibObjects 3 }
+
+-- callActiveTable
+-- Table to store active call information.
+-- These calls could be circuit switched or they could
+-- be virtual circuits.
+-- An entry will be created when a call is started and deleted
+-- when a call is cleared.
+
+callActiveTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CallActiveEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table containing information about active
+             calls to a specific destination."
+        ::= { callActive 1 }
+
+callActiveEntry OBJECT-TYPE
+        SYNTAX      CallActiveEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The information regarding a single active Connection.
+             An entry in this table will be created when a call is
+             started. An entry in this table will be deleted when
+             an active call clears."
+        INDEX       { callActiveSetupTime, callActiveIndex }
+        ::= { callActiveTable 1 }
+
+CallActiveEntry ::=
+        SEQUENCE {
+            callActiveSetupTime                  TimeStamp,
+            callActiveIndex                      INTEGER,
+            callActivePeerAddress                DisplayString,
+            callActivePeerSubAddress             DisplayString,
+            callActivePeerId                     INTEGER,
+            callActivePeerIfIndex                INTEGER,
+            callActiveLogicalIfIndex             InterfaceIndexOrZero,
+            callActiveConnectTime                TimeStamp,
+            callActiveCallState                  INTEGER,
+            callActiveCallOrigin                 INTEGER,
+            callActiveChargedUnits               AbsoluteCounter32,
+            callActiveInfoType                   INTEGER,
+            callActiveTransmitPackets            AbsoluteCounter32,
+            callActiveTransmitBytes              AbsoluteCounter32,
+            callActiveReceivePackets             AbsoluteCounter32,
+            callActiveReceiveBytes               AbsoluteCounter32
+        }
+
+callActiveSetupTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call associated to this
+             entry was started. This will be useful for an NMS to
+             retrieve all calls after a specific time. Also, this object
+             can be useful in finding large delays between the time the
+             call was started and the time the call was connected.
+             For ISDN media, this will be the time when the setup
+             message was received from or sent to the network."
+        ::= { callActiveEntry 1 }
+
+callActiveIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..'7fffffff'h)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Small index variable to distinguish calls that start in
+             the same hundredth of a second."
+        ::= { callActiveEntry 2 }
+
+callActivePeerAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number this call is connected to. If the number is
+             not available, then it will have a length of zero."
+        ::= { callActiveEntry 3 }
+
+callActivePeerSubAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The subaddress this call is connected to. If the subaddress
+             is undefined or not available, this will be a zero length
+             string."
+        ::= { callActiveEntry 4 }
+
+callActivePeerId OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the Id value of the peer table entry
+             to which this call was made. If a peer table entry
+             for this call does not exist or is unknown, the value
+             of this object will be zero."
+        ::= { callActiveEntry 5 }
+
+callActivePeerIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the ifIndex value of the peer table entry
+             to which this call was made. If a peer table entry
+             for this call does not exist or is unknown, the value
+             of this object will be zero."
+        ::= { callActiveEntry 6 }
+
+callActiveLogicalIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndexOrZero
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the ifIndex value of the logical interface through
+             which this call was made. For ISDN media, this would be
+             the ifIndex of the B channel which was used for this call.
+             If the ifIndex value is unknown, the value of this object
+             will be zero."
+        ::= { callActiveEntry 7 }
+
+callActiveConnectTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call was connected.
+             If the call is not connected, this object will have a
+             value of zero."
+        ::= { callActiveEntry 8 }
+
+callActiveCallState OBJECT-TYPE
+        SYNTAX      INTEGER {
+            unknown(1),
+            connecting(2),
+            connected(3),
+            active(4)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current call state.
+             unknown(1)     - The call state is unknown.
+             connecting(2)  - A connection attempt (outgoing call)
+                              is being made.
+             connected(3)   - An incoming call is in the process
+                              of validation.
+             active(4)      - The call is active.
+            "
+        ::= { callActiveEntry 9 }
+
+callActiveCallOrigin OBJECT-TYPE
+        SYNTAX      INTEGER {
+            originate(1),
+            answer(2),
+            callback(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The call origin."
+        ::= { callActiveEntry 10 }
+
+callActiveChargedUnits OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of charged units for this connection.
+             For incoming calls or if charging information is
+             not supplied by the switch, the value of this object
+             will be zero."
+        ::= { callActiveEntry 11 }
+
+callActiveInfoType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            other(1),                   -- e.g. for non-isdn media
+            speech(2),
+            unrestrictedDigital(3),     -- 64k/s data
+            unrestrictedDigital56(4),   -- with 56k rate adaption
+            restrictedDigital(5),
+            audio31(6),                 -- 3.1 kHz audio
+            audio7(7),                  -- 7 kHz audio
+            video(8),
+            packetSwitched(9),
+            fax(10)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The information type for this call."
+        ::= { callActiveEntry 12 }
+
+callActiveTransmitPackets OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS     current
+        DESCRIPTION
+            "The number of packets which were transmitted for this
+             call."
+        ::= { callActiveEntry 13 }
+
+callActiveTransmitBytes OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes which were transmitted for this
+             call."
+        ::= { callActiveEntry 14 }
+
+callActiveReceivePackets OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets which were received for this
+             call."
+        ::= { callActiveEntry 15 }
+
+callActiveReceiveBytes OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes which were received for this call."
+        ::= { callActiveEntry 16 }
+
+--
+-- the call history group
+--
+
+callHistory OBJECT IDENTIFIER ::= { dialControlMibObjects 4 }
+
+callHistoryTableMaxLength OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The upper limit on the number of entries that the
+             callHistoryTable may contain.  A value of 0
+             will prevent any history from being retained. When
+             this table is full, the oldest entry will be deleted
+             and the new one will be created."
+        ::= { callHistory 1 }
+
+callHistoryRetainTimer OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        UNITS       "minutes"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The minimum amount of time that an callHistoryEntry
+             will be maintained before being deleted. A value of
+             0 will prevent any history from being retained in the
+
+             callHistoryTable, but will neither prevent callCompletion
+             traps being generated nor affect other tables."
+        ::= { callHistory 2 }
+
+-- callHistoryTable
+-- Table to store the past call information. The Destination number
+-- and the call connect and disconnect time, the disconnection cause
+-- are stored. These calls could be circuit switched or they could
+-- be virtual circuits. History of each and every call is stored,
+-- of successful calls as well as of unsuccessful and rejected calls.
+-- An entry will be created when a call is cleared.
+
+callHistoryTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CallHistoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table containing information about specific
+             calls to a specific destination."
+        ::= { callHistory 3 }
+
+callHistoryEntry OBJECT-TYPE
+        SYNTAX      CallHistoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The information regarding a single Connection."
+        INDEX       { callActiveSetupTime, callActiveIndex }
+        ::= { callHistoryTable 1 }
+
+CallHistoryEntry ::=
+        SEQUENCE {
+            callHistoryPeerAddress               DisplayString,
+            callHistoryPeerSubAddress            DisplayString,
+            callHistoryPeerId                    INTEGER,
+            callHistoryPeerIfIndex               INTEGER,
+            callHistoryLogicalIfIndex            InterfaceIndex,
+            callHistoryDisconnectCause           OCTET STRING,
+            callHistoryDisconnectText            DisplayString,
+            callHistoryConnectTime               TimeStamp,
+            callHistoryDisconnectTime            TimeStamp,
+            callHistoryCallOrigin                INTEGER,
+            callHistoryChargedUnits              AbsoluteCounter32,
+            callHistoryInfoType                  INTEGER,
+            callHistoryTransmitPackets           AbsoluteCounter32,
+            callHistoryTransmitBytes             AbsoluteCounter32,
+            callHistoryReceivePackets            AbsoluteCounter32,
+            callHistoryReceiveBytes              AbsoluteCounter32
+        }
+
+callHistoryPeerAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number this call was connected to. If the number is
+             not available, then it will have a length of zero."
+        ::= { callHistoryEntry 1 }
+
+callHistoryPeerSubAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The subaddress this call was connected to. If the subaddress
+             is undefined or not available, this will be a zero length
+             string."
+        ::= { callHistoryEntry 2 }
+
+callHistoryPeerId OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the Id value of the peer table entry
+             to which this call was made. If a peer table entry
+             for this call does not exist, the value of this object
+             will be zero."
+        ::= { callHistoryEntry 3 }
+
+callHistoryPeerIfIndex OBJECT-TYPE
+        SYNTAX      INTEGER (0..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the ifIndex value of the peer table entry
+             to which this call was made. If a peer table entry
+             for this call does not exist, the value of this object
+             will be zero."
+        ::= { callHistoryEntry 4 }
+
+callHistoryLogicalIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is the ifIndex value of the logical interface through
+             which this call was made. For ISDN media, this would be
+             the ifIndex of the B channel which was used for this call."
+        ::= { callHistoryEntry 5 }
+
+callHistoryDisconnectCause OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (0..4))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The encoded network cause value associated with this call.
+
+             The value of this object will depend on the interface type
+             as well as on the protocol and protocol version being
+             used on this interface. Some references for possible cause
+             values are given below."
+        REFERENCE
+            "- Bellcore SR-NWT-001953, Generic Guidelines for
+               ISDN Terminal Equipment On Basic Access Interfaces,
+               chapter 5.2.5.8.
+             - Bellcore SR-NWT-002343, ISDN Primary Rate Interface
+               Generic Guidelines for Customer Premises Equipment,
+               chapter 8.2.5.8.
+             - ITU-T Q.931, Appendix I.
+             - ITU-T X.25, CAUSE and DIAGNOSTIC field values.
+             - German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4."
+        ::= { callHistoryEntry 6 }
+
+callHistoryDisconnectText OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "ASCII text describing the reason for call termination.
+
+             This object exists because it would be impossible for
+             a management station to store all possible cause values
+             for all types of interfaces. It should be used only if
+             a management station is unable to decode the value of
+             dialCtlPeerStatsLastDisconnectCause."
+        ::= { callHistoryEntry 7 }
+
+callHistoryConnectTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call was connected."
+        ::= { callHistoryEntry 8 }
+
+callHistoryDisconnectTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the call was disconnected."
+        ::= { callHistoryEntry 9 }
+
+callHistoryCallOrigin OBJECT-TYPE
+        SYNTAX      INTEGER {
+            originate(1),
+            answer(2),
+            callback(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The call origin."
+        ::= { callHistoryEntry 10 }
+
+callHistoryChargedUnits OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of charged units for this connection.
+             For incoming calls or if charging information is
+             not supplied by the switch, the value of this object
+             will be zero."
+        ::= { callHistoryEntry 11 }
+
+callHistoryInfoType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            other(1),                   -- e.g. for non-isdn media
+            speech(2),
+            unrestrictedDigital(3),     -- 64k/s data
+            unrestrictedDigital56(4),   -- with 56k rate adaption
+            restrictedDigital(5),
+            audio31(6),                 -- 3.1 kHz audio
+            audio7(7),                  -- 7 kHz audio
+            video(8),
+            packetSwitched(9),
+            fax(10)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The information type for this call."
+        ::= { callHistoryEntry 12 }
+
+callHistoryTransmitPackets OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS     current
+        DESCRIPTION
+            "The number of packets which were transmitted while this
+             call was active."
+        ::= { callHistoryEntry 13 }
+
+callHistoryTransmitBytes OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes which were transmitted while this
+             call was active."
+        ::= { callHistoryEntry 14 }
+
+callHistoryReceivePackets OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of packets which were received while this
+             call was active."
+        ::= { callHistoryEntry 15 }
+
+callHistoryReceiveBytes OBJECT-TYPE
+        SYNTAX      AbsoluteCounter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of bytes which were received while this
+             call was active."
+        ::= { callHistoryEntry 16 }
+
+-- Traps related to Connection management
+
+dialControlMibTrapPrefix OBJECT IDENTIFIER ::= { dialControlMib 2 }
+dialControlMibTraps OBJECT IDENTIFIER ::= { dialControlMibTrapPrefix 0 }
+
+dialCtlPeerCallInformation NOTIFICATION-TYPE
+        OBJECTS {
+
+            callHistoryPeerId,
+            callHistoryPeerIfIndex,
+            callHistoryLogicalIfIndex,
+            ifOperStatus,
+            callHistoryPeerAddress,
+            callHistoryPeerSubAddress,
+            callHistoryDisconnectCause,
+            callHistoryConnectTime,
+            callHistoryDisconnectTime,
+            callHistoryInfoType,
+            callHistoryCallOrigin
+        }
+        STATUS      current
+        DESCRIPTION
+            "This trap/inform is sent to the manager whenever
+             a successful call clears, or a failed call attempt
+             is determined to have ultimately failed. In the
+             event that call retry is active, then this is after
+             all retry attempts have failed. However, only one such
+             trap is sent in between successful call attempts;
+             subsequent call attempts result in no trap.
+             ifOperStatus will return the operational status of the
+             virtual interface associated with the peer to whom
+             this call was made to."
+     ::= { dialControlMibTraps 1 }
+
+dialCtlPeerCallSetup NOTIFICATION-TYPE
+        OBJECTS {
+            callActivePeerId,
+            callActivePeerIfIndex,
+            callActiveLogicalIfIndex,
+            ifOperStatus,
+            callActivePeerAddress,
+            callActivePeerSubAddress,
+            callActiveInfoType,
+            callActiveCallOrigin
+        }
+        STATUS      current
+        DESCRIPTION
+            "This trap/inform is sent to the manager whenever
+             a call setup message is received or sent.
+             ifOperStatus will return the operational status of the
+             virtual interface associated with the peer to whom
+             this call was made to."
+     ::= { dialControlMibTraps 2 }
+
+-- conformance information
+
+dialControlMibConformance OBJECT IDENTIFIER ::=
+                                { dialControlMib 3 }
+dialControlMibCompliances OBJECT IDENTIFIER ::=
+                                { dialControlMibConformance 1 }
+dialControlMibGroups      OBJECT IDENTIFIER ::=
+                                { dialControlMibConformance 2 }
+
+-- compliance statements
+
+dialControlMibCompliance MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+            "The compliance statement for entities which
+             implement the DIAL CONTROL MIB"
+        MODULE      -- this module
+        MANDATORY-GROUPS
+            { dialControlGroup, callActiveGroup, callHistoryGroup,
+              callNotificationsGroup }
+        ::= { dialControlMibCompliances 1 }
+
+-- units of conformance
+
+dialControlGroup OBJECT-GROUP
+        OBJECTS {
+            dialCtlAcceptMode,
+            dialCtlTrapEnable,
+            dialCtlPeerCfgIfType,
+            dialCtlPeerCfgLowerIf,
+            dialCtlPeerCfgOriginateAddress,
+            dialCtlPeerCfgAnswerAddress,
+            dialCtlPeerCfgSubAddress,
+            dialCtlPeerCfgClosedUserGroup,
+            dialCtlPeerCfgSpeed,
+            dialCtlPeerCfgInfoType,
+            dialCtlPeerCfgPermission,
+            dialCtlPeerCfgInactivityTimer,
+            dialCtlPeerCfgMinDuration,
+            dialCtlPeerCfgMaxDuration,
+            dialCtlPeerCfgCarrierDelay,
+            dialCtlPeerCfgCallRetries,
+            dialCtlPeerCfgRetryDelay,
+            dialCtlPeerCfgFailureDelay,
+            dialCtlPeerCfgTrapEnable,
+            dialCtlPeerCfgStatus,
+            dialCtlPeerStatsConnectTime,
+            dialCtlPeerStatsChargedUnits,
+            dialCtlPeerStatsSuccessCalls,
+            dialCtlPeerStatsFailCalls,
+            dialCtlPeerStatsAcceptCalls,
+            dialCtlPeerStatsRefuseCalls,
+            dialCtlPeerStatsLastDisconnectCause,
+            dialCtlPeerStatsLastDisconnectText,
+            dialCtlPeerStatsLastSetupTime
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing the DIAL CONTROL
+             capability."
+        ::= { dialControlMibGroups 1 }
+
+callActiveGroup OBJECT-GROUP
+        OBJECTS {
+            callActivePeerAddress,
+            callActivePeerSubAddress,
+            callActivePeerId,
+            callActivePeerIfIndex,
+            callActiveLogicalIfIndex,
+            callActiveConnectTime,
+            callActiveCallState,
+            callActiveCallOrigin,
+            callActiveChargedUnits,
+            callActiveInfoType,
+            callActiveTransmitPackets,
+            callActiveTransmitBytes,
+            callActiveReceivePackets,
+            callActiveReceiveBytes
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing the active call
+             capability."
+        ::= { dialControlMibGroups 2 }
+
+callHistoryGroup OBJECT-GROUP
+        OBJECTS {
+            callHistoryTableMaxLength,
+            callHistoryRetainTimer,
+            callHistoryPeerAddress,
+            callHistoryPeerSubAddress,
+            callHistoryPeerId,
+            callHistoryPeerIfIndex,
+            callHistoryLogicalIfIndex,
+            callHistoryDisconnectCause,
+            callHistoryDisconnectText,
+            callHistoryConnectTime,
+            callHistoryDisconnectTime,
+            callHistoryCallOrigin,
+            callHistoryChargedUnits,
+            callHistoryInfoType,
+            callHistoryTransmitPackets,
+            callHistoryTransmitBytes,
+            callHistoryReceivePackets,
+            callHistoryReceiveBytes
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing the Call History
+             capability."
+        ::= { dialControlMibGroups 3 }
+
+callNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { dialCtlPeerCallInformation, dialCtlPeerCallSetup }
+    STATUS        current
+    DESCRIPTION
+            "The notifications which a Dial Control MIB entity is
+             required to implement."
+    ::= { dialControlMibGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/DIFFSERV-CONFIG-MIB.mib b/snmp_builder/mibs/DIFFSERV-CONFIG-MIB.mib
new file mode 100644
index 0000000..c255cf8
--- /dev/null
+++ b/snmp_builder/mibs/DIFFSERV-CONFIG-MIB.mib
@@ -0,0 +1,243 @@
+DIFFSERV-CONFIG-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+
+    OBJECT-TYPE, MODULE-IDENTITY,
+    zeroDotZero, mib-2            FROM SNMPv2-SMI          -- [RFC2578]
+
+    RowStatus, StorageType,
+    RowPointer, DateAndTime       FROM SNMPv2-TC           -- [RFC2579]
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP                  FROM SNMPv2-CONF         -- [RFC2580]
+
+    SnmpAdminString               FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]
+
+diffServConfigMib MODULE-IDENTITY
+    LAST-UPDATED "200401220000Z" -- 22 January 2004
+    ORGANIZATION "SNMPCONF WG"
+    CONTACT-INFO
+       "SNMPCONF Working Group
+        http://www.ietf.org/html.charters/snmpconf-charter.html
+        WG mailing list: snmpconf@snmp.com
+
+        Editors:
+        Harrie Hazewinkel
+        I.Net
+        via Darwin 85
+        20019 - Settimo Milanese (MI)
+        Italy
+        EMail: harrie@inet.it
+
+        David Partain
+        Ericsson AB
+        P.O. Box 1248
+        SE-581 12 Linkoping
+        Sweden
+        E-mail: David.Partain@ericsson.com"
+    DESCRIPTION
+        "This MIB module contains differentiated services
+        specific managed objects to perform higher-level
+        configuration management.  This MIB allows policies
+        to use 'templates' to instantiate Differentiated
+        Services functional datapath configurations to
+        be assigned (associated with an interface and
+        direction) when a policy is activated.
+
+        Copyright (C) The Internet Society (2004).  This version
+        of this MIB module is part of RFC 3747;  see the RFC
+        itself for full legal notices."
+    REVISION "200401220000Z" -- 22 January 2004
+    DESCRIPTION
+        "Initial version published as RFC 3747"
+    ::= { mib-2 108 }
+
+diffServConfigMIBObjects OBJECT IDENTIFIER ::= { diffServConfigMib 1 }
+diffServConfigMIBConformance OBJECT IDENTIFIER ::=
+                                               { diffServConfigMib 2 }
+
+--
+-- The Differentiated Services configuration objects
+--
+
+diffServConfigTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServConfigEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "A table which defines the various per-hop-behaviors
+       for which the system has default 'templates'."
+    ::= { diffServConfigMIBObjects 2 }
+
+diffServConfigEntry OBJECT-TYPE
+    SYNTAX       DiffServConfigEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry defining a per-hop-behavior.  Each entry in
+       this table combines the various parameters (entries)
+       into a specific per-hop-behavior.  Entries in this
+       table might be defined by a vendor (pre-configured)
+       or defined by a management application."
+    INDEX { diffServConfigId }
+    ::= { diffServConfigTable 1 }
+
+DiffServConfigEntry ::= SEQUENCE {
+    diffServConfigId           SnmpAdminString,
+    diffServConfigDescr        SnmpAdminString,
+    diffServConfigOwner        SnmpAdminString,
+    diffServConfigLastChange   DateAndTime,
+    diffServConfigStart        RowPointer,
+    diffServConfigStorage      StorageType,
+    diffServConfigStatus       RowStatus
+}
+
+diffServConfigId OBJECT-TYPE
+    SYNTAX         SnmpAdminString (SIZE(1..116))
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION
+      "A unique id for the per-hop-behavior policy for at
+       least the SNMP agent.  For ease of administration the
+       value may be unique within an administrative domain,
+       but this is not required.
+
+       The range of up to 116 octets is chosen to stay within
+       the SMI limit of 128 sub-identifiers in an object
+       identifier."
+    ::= { diffServConfigEntry 1 }
+
+diffServConfigDescr OBJECT-TYPE
+    SYNTAX         SnmpAdminString
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "A human-readable description to identify this defined
+       per-hop-behavior.  Note that this is an SnmpAdminString,
+       which permits UTF-8 strings.  An administratively assigned
+       identifier for a template that would be unique within
+       an administrative domain.  It is up to the management
+       applications to agree how these are assigned within the
+       administrative domain.  Once a description, such as
+       'EF' is assigned, that has a certain set of parameters
+       that achieve 'EF' from box to box. Management
+       application code or script code can then scan
+       the table to find the proper template and then
+       assign it."
+    ::= { diffServConfigEntry 2 }
+
+diffServConfigOwner OBJECT-TYPE
+    SYNTAX         SnmpAdminString
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The owner who created this entry."
+    ::= { diffServConfigEntry 3 }
+
+diffServConfigLastChange OBJECT-TYPE
+    SYNTAX         DateAndTime
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+       "The date and time when this entry was last changed."
+    ::= { diffServConfigEntry 4 }
+
+diffServConfigStart OBJECT-TYPE
+    SYNTAX         RowPointer
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The pointer to a functional datapath configuration template as
+       set up in the DIFFSERV-MIB.  This RowPointer should
+       point to an instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+         diffServActionEntry
+         diffServAlgDropEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates no
+       further Diffserv treatment is performed on traffic of
+       this functional datapath.  This also means that the
+       template described by this row is not defined.
+
+       If the row pointed to does not exist, the treatment
+       is as if this attribute contains a value of zeroDotZero."
+    REFERENCE
+       "Differentiated Services MIB module"
+    DEFVAL { zeroDotZero }
+    ::= { diffServConfigEntry 5 }
+
+diffServConfigStorage OBJECT-TYPE
+    SYNTAX         StorageType
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The type of storage used for this row.
+
+       Since an entry in this table serves as a starting
+       point for a configuration, it is recommended that
+       all entries comprising the configuration started by
+       diffServConfigStart follow the storage type of this
+       entry.  Otherwise, after agent reboots a configuration
+       may differ.  It may very well be that the agent is
+       not capable of detecting such changes and therefore,
+       the management application should verify the correct
+       configuration after a reboot.  Rows with a StorageType
+       of 'permanent' do not need to allow write access to
+       any of the columnar objects in that row."
+    DEFVAL { nonVolatile }
+    ::= { diffServConfigEntry 6 }
+
+diffServConfigStatus OBJECT-TYPE
+    SYNTAX         RowStatus
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "RowStatus object used for creation and deletion of
+       rows in this table.  All writable objects in this row
+       may be modified at any time."
+    DEFVAL { notInService }
+    ::= { diffServConfigEntry 7 }
+
+--
+-- MIB Compliance statements.
+--
+
+diffServConfigMIBCompliances
+   OBJECT IDENTIFIER ::= { diffServConfigMIBConformance 1 }
+diffServConfigMIBGroups
+   OBJECT IDENTIFIER ::= { diffServConfigMIBConformance 2 }
+
+diffServConfigMIBFullCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+       "The full compliance for this MIB module.
+
+       For this compliance level the 'diffServMIBFullCompliance'
+       must be met, since this MIB module depends on it in order
+       to provide the configuration entries.
+       "
+    MODULE  -- This module
+    MANDATORY-GROUPS {  diffServConfigMIBConfigGroup }
+
+    OBJECT diffServConfigStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+    ::= { diffServConfigMIBCompliances 1 }
+
+diffServConfigMIBConfigGroup OBJECT-GROUP
+    OBJECTS {  diffServConfigDescr,
+               diffServConfigOwner,
+               diffServConfigLastChange,
+               diffServConfigStart,
+               diffServConfigStorage,
+               diffServConfigStatus
+    }
+    STATUS current
+    DESCRIPTION
+       "The per-hop-behavior Group defines the MIB objects that
+       describe the configuration template for the per-hop-behavior."
+    ::= { diffServConfigMIBGroups 1 }
+END
diff --git a/snmp_builder/mibs/DIFFSERV-MIB.mib b/snmp_builder/mibs/DIFFSERV-MIB.mib
new file mode 100644
index 0000000..600cb05
--- /dev/null
+++ b/snmp_builder/mibs/DIFFSERV-MIB.mib
@@ -0,0 +1,3514 @@
+DIFFSERV-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+    Unsigned32, Counter64, MODULE-IDENTITY, OBJECT-TYPE,
+    OBJECT-IDENTITY, zeroDotZero, mib-2
+         FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, RowPointer,
+    StorageType, AutonomousType
+         FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+         FROM SNMPv2-CONF
+    ifIndex, InterfaceIndexOrZero
+        FROM IF-MIB
+    InetAddressType, InetAddress, InetAddressPrefixLength,
+    InetPortNumber
+        FROM INET-ADDRESS-MIB
+    BurstSize
+        FROM INTEGRATED-SERVICES-MIB
+    Dscp, DscpOrAny
+        FROM DIFFSERV-DSCP-TC;
+
+diffServMib MODULE-IDENTITY
+    LAST-UPDATED "200202070000Z"
+    ORGANIZATION "IETF Differentiated Services WG"
+    CONTACT-INFO
+       "       Fred Baker
+               Cisco Systems
+               1121 Via Del Rey
+               Santa Barbara, CA 93117, USA
+               E-mail: fred@cisco.com
+
+               Kwok Ho Chan
+               Nortel Networks
+               600 Technology Park Drive
+               Billerica, MA 01821, USA
+               E-mail: khchan@nortelnetworks.com
+
+               Andrew Smith
+               Harbour Networks
+               Jiuling Building
+
+               21 North Xisanhuan Ave.
+               Beijing, 100089, PRC
+               E-mail: ah_smith@acm.org
+
+               Differentiated Services Working Group:
+               diffserv@ietf.org"
+    DESCRIPTION
+       "This MIB defines the objects necessary to manage a device that
+       uses the Differentiated Services Architecture described in RFC
+       2475. The Conceptual Model of a Differentiated Services Router
+       provides supporting information on how such a router is modeled."
+    REVISION "200202070000Z"
+    DESCRIPTION
+       "Initial version, published as RFC 3289."
+    ::= { mib-2 97 }
+
+diffServMIBObjects     OBJECT IDENTIFIER ::= { diffServMib 1 }
+diffServMIBConformance OBJECT IDENTIFIER ::= { diffServMib 2 }
+diffServMIBAdmin       OBJECT IDENTIFIER ::= { diffServMib 3 }
+
+IndexInteger ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS   current
+    DESCRIPTION
+       "An integer which may be used as a table index."
+    SYNTAX   Unsigned32 (1..4294967295)
+
+IndexIntegerNextFree ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS   current
+    DESCRIPTION
+       "An integer which may be used as a new Index in a table.
+
+       The special value of 0 indicates that no more new entries can be
+       created in the relevant table.
+
+       When a MIB is used for configuration, an object with this SYNTAX
+       always contains a legal value (if non-zero) for an index that is
+       not currently used in the relevant table. The Command Generator
+       (Network Management Application) reads this variable and uses the
+       (non-zero) value read when creating a new row with an SNMP SET.
+       When the SET is performed, the Command Responder (agent) must
+       determine whether the value is indeed still unused; Two Network
+       Management Applications may attempt to create a row
+       (configuration entry) simultaneously and use the same value. If
+       it is currently unused, the SET succeeds and the Command
+       Responder (agent) changes the value of this object, according to
+       an implementation-specific algorithm.  If the value is in use,
+       however, the SET fails.  The Network Management Application must
+       then re-read this variable to obtain a new usable value.
+
+       An OBJECT-TYPE definition using this SYNTAX MUST specify the
+       relevant table for which the object is providing this
+       functionality."
+    SYNTAX   Unsigned32 (0..4294967295)
+
+IfDirection ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+       "IfDirection specifies a direction of data travel on an
+       interface. 'inbound' traffic is operated on during reception from
+       the interface, while 'outbound' traffic is operated on prior to
+       transmission on the interface."
+    SYNTAX  INTEGER {
+                inbound(1),     -- ingress interface
+                outbound(2)     -- egress interface
+}
+
+--
+-- Data Path
+--
+
+diffServDataPath       OBJECT IDENTIFIER ::= { diffServMIBObjects 1 }
+
+--
+-- Data Path Table
+--
+-- The Data Path Table enumerates the Differentiated Services
+-- Functional Data Paths within this device.  Each entry in this table
+-- is indexed by ifIndex and ifDirection.  Each entry provides the
+-- first Differentiated Services Functional Data Path Element to
+-- process data flowing along specific data path.  This table should
+-- have at most two entries for each interface capable of
+-- Differentiated Services processing on this device: ingress and
+-- egress.
+
+-- Note that Differentiated Services Functional Data Path Elements
+-- linked together using their individual next pointers and anchored by
+-- an entry of the diffServDataPathTable constitute a functional data
+-- path.
+--
+
+diffServDataPathTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServDataPathEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The data path table contains RowPointers indicating the start of
+       the functional data path for each interface and traffic direction
+       in this device. These may merge, or be separated into parallel
+       data paths."
+    ::= { diffServDataPath 1 }
+
+diffServDataPathEntry OBJECT-TYPE
+    SYNTAX       DiffServDataPathEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the data path table indicates the start of a single
+       Differentiated Services Functional Data Path in this device.
+
+       These are associated with individual interfaces, logical or
+       physical, and therefore are instantiated by ifIndex. Therefore,
+       the interface index must have been assigned, according to the
+       procedures applicable to that, before it can be meaningfully
+       used. Generally, this means that the interface must exist.
+
+       When diffServDataPathStorage is of type nonVolatile, however,
+       this may reflect the configuration for an interface whose ifIndex
+       has been assigned but for which the supporting implementation is
+       not currently present."
+    INDEX { ifIndex, diffServDataPathIfDirection }
+    ::= { diffServDataPathTable 1 }
+
+DiffServDataPathEntry ::= SEQUENCE  {
+    diffServDataPathIfDirection    IfDirection,
+    diffServDataPathStart          RowPointer,
+    diffServDataPathStorage        StorageType,
+    diffServDataPathStatus         RowStatus
+}
+
+diffServDataPathIfDirection OBJECT-TYPE
+    SYNTAX       IfDirection
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "IfDirection specifies whether the reception or transmission path
+       for this interface is in view."
+    ::= { diffServDataPathEntry 1 }
+
+diffServDataPathStart OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This selects the first Differentiated Services Functional Data
+       Path Element to handle traffic for this data path. This
+       RowPointer should point to an instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+         diffServActionEntry
+         diffServAlgDropEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates that no
+       Differentiated Services treatment is performed on traffic of this
+       data path. A pointer with the value zeroDotZero normally
+       terminates a functional data path.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServDataPathEntry 2 }
+
+diffServDataPathStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServDataPathEntry 3 }
+
+diffServDataPathStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time."
+    ::= { diffServDataPathEntry 4 }
+
+--
+-- Classifiers
+--
+
+diffServClassifier     OBJECT IDENTIFIER ::= { diffServMIBObjects 2 }
+
+--
+
+-- Classifier Table
+--
+-- The Classifier Table allows multiple classifier elements, of same or
+-- different types, to be used together. A classifier must completely
+-- classify all packets presented to it. This means that all traffic
+-- presented to a classifier must match at least one classifier element
+-- within the classifier, with the classifier element parameters
+-- specified by a filter.
+
+-- If there is ambiguity between classifier elements of different
+-- classifier, classifier linkage order indicates their precedence; the
+-- first classifier in the link is applied to the traffic first.
+
+-- Entries in the classifier element table serves as the anchor for
+-- each classification pattern, defined in filter table entries.  Each
+-- classifier element table entry also specifies the subsequent
+-- downstream Differentiated Services Functional Data Path Element when
+-- the classification pattern is satisfied. Each entry in the
+-- classifier element table describes one branch of the fan-out
+-- characteristic of a classifier indicated in the Informal
+-- Differentiated Services Model section 4.1.  A classifier is composed
+-- of one or more classifier elements.
+
+diffServClfrNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServClfrId, or a
+       zero to indicate that none exist."
+    ::= { diffServClassifier 1 }
+
+diffServClfrTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServClfrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table enumerates all the diffserv classifier functional
+       data path elements of this device.  The actual classification
+       definitions are defined in diffServClfrElementTable entries
+       belonging to each classifier.
+
+       An entry in this table, pointed to by a RowPointer specifying an
+       instance of diffServClfrStatus, is frequently used as the name
+       for a set of classifier elements, which all use the index
+       diffServClfrId. Per the semantics of the classifier element
+       table, these entries constitute one or more unordered sets of
+       tests which may be simultaneously applied to a message to
+
+       classify it.
+
+       The primary function of this table is to ensure that the value of
+       diffServClfrId is unique before attempting to use it in creating
+       a diffServClfrElementEntry. Therefore, the diffServClfrEntry must
+       be created on the same SET as the diffServClfrElementEntry, or
+       before the diffServClfrElementEntry is created."
+    ::= { diffServClassifier 2 }
+
+diffServClfrEntry OBJECT-TYPE
+    SYNTAX       DiffServClfrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the classifier table describes a single classifier.
+       All classifier elements belonging to the same classifier use the
+       classifier's diffServClfrId as part of their index."
+    INDEX { diffServClfrId }
+    ::= { diffServClfrTable 1 }
+
+DiffServClfrEntry ::= SEQUENCE  {
+    diffServClfrId              IndexInteger,
+    diffServClfrStorage         StorageType,
+    diffServClfrStatus          RowStatus
+}
+
+diffServClfrId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the classifier entries.  Managers
+       should obtain new values for row creation in this table by
+       reading diffServClfrNextFree."
+    ::= { diffServClfrEntry 1 }
+
+diffServClfrStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServClfrEntry 2 }
+
+diffServClfrStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServClfrEntry 3 }
+
+--
+-- Classifier Element Table
+--
+diffServClfrElementNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServClfrElementId,
+       or a zero to indicate that none exist."
+    ::= { diffServClassifier 3 }
+
+diffServClfrElementTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServClfrElementEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The classifier element table enumerates the relationship between
+       classification patterns and subsequent downstream Differentiated
+       Services Functional Data Path elements.
+       diffServClfrElementSpecific points to a filter that specifies the
+       classification parameters. A classifier may use filter tables of
+       different types together.
+
+       One example of a filter table defined in this MIB is
+       diffServMultiFieldClfrTable, for IP Multi-Field Classifiers
+       (MFCs). Such an entry might identify anything from a single
+       micro-flow (an identifiable sub-session packet stream directed
+       from one sending transport to the receiving transport or
+       transports), or aggregates of those such as the traffic from a
+       host, traffic for an application, or traffic between two hosts
+       using an application and a given DSCP. The standard Behavior
+       Aggregate used in the Differentiated Services Architecture is
+       encoded as a degenerate case of such an aggregate - the traffic
+       using a particular DSCP value.
+
+       Filter tables for other filter types may be defined elsewhere."
+    ::= { diffServClassifier 4 }
+
+diffServClfrElementEntry OBJECT-TYPE
+    SYNTAX       DiffServClfrElementEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the classifier element table describes a single
+       element of the classifier."
+    INDEX { diffServClfrId, diffServClfrElementId }
+    ::= { diffServClfrElementTable 1 }
+
+DiffServClfrElementEntry ::= SEQUENCE  {
+    diffServClfrElementId          IndexInteger,
+    diffServClfrElementPrecedence  Unsigned32,
+    diffServClfrElementNext        RowPointer,
+    diffServClfrElementSpecific    RowPointer,
+    diffServClfrElementStorage     StorageType,
+    diffServClfrElementStatus      RowStatus
+}
+
+diffServClfrElementId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Classifier Element entries.
+       Managers obtain new values for row creation in this table by
+       reading diffServClfrElementNextFree."
+    ::= { diffServClfrElementEntry 1 }
+
+diffServClfrElementPrecedence OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The relative order in which classifier elements are applied:
+       higher numbers represent classifier element with higher
+       precedence.  Classifier elements with the same order must be
+       unambiguous i.e. they must define non-overlapping patterns, and
+       are considered to be applied simultaneously to the traffic
+       stream. Classifier elements with different order may overlap in
+       their filters:  the classifier element with the highest order
+       that matches is taken.
+
+       On a given interface, there must be a complete classifier in
+       place at all times in the ingress direction.  This means one or
+       more filters must match any possible pattern. There is no such
+
+       requirement in the egress direction."
+    ::= { diffServClfrElementEntry 2 }
+
+diffServClfrElementNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This attribute provides one branch of the fan-out functionality
+       of a classifier described in the Informal Differentiated Services
+       Model section 4.1.
+
+       This selects the next Differentiated Services Functional Data
+       Path Element to handle traffic for this data path. This
+       RowPointer should point to an instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+         diffServActionEntry
+         diffServAlgDropEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates no further
+       Differentiated Services treatment is performed on traffic of this
+       data path. The use of zeroDotZero is the normal usage for the
+       last functional data path element of the current data path.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServClfrElementEntry 3 }
+
+diffServClfrElementSpecific OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "A pointer to a valid entry in another table, filter table, that
+       describes the applicable classification parameters, e.g. an entry
+       in diffServMultiFieldClfrTable.
+
+       The value zeroDotZero is interpreted to match anything not
+       matched by another classifier element - only one such entry may
+       exist for each classifier.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+
+       becomes inactive by other means, the element is ignored."
+    ::= { diffServClfrElementEntry 4 }
+
+diffServClfrElementStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServClfrElementEntry 5 }
+
+diffServClfrElementStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServClfrElementEntry 6 }
+
+--
+-- IP Multi-field Classification Table
+--
+-- Classification based on six different fields in the IP header.
+-- Functional Data Paths may share definitions by using the same entry.
+--
+
+diffServMultiFieldClfrNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for
+       diffServMultiFieldClfrId, or a zero to indicate that none exist."
+    ::= { diffServClassifier 5 }
+
+diffServMultiFieldClfrTable OBJECT-TYPE
+    SYNTAX   SEQUENCE OF DiffServMultiFieldClfrEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "A table of IP Multi-field Classifier filter entries that a
+
+       system may use to identify IP traffic."
+    ::= { diffServClassifier 6 }
+
+diffServMultiFieldClfrEntry OBJECT-TYPE
+    SYNTAX       DiffServMultiFieldClfrEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "An IP Multi-field Classifier entry describes a single filter."
+    INDEX { diffServMultiFieldClfrId }
+    ::= { diffServMultiFieldClfrTable 1 }
+
+DiffServMultiFieldClfrEntry ::= SEQUENCE {
+    diffServMultiFieldClfrId           IndexInteger,
+    diffServMultiFieldClfrAddrType     InetAddressType,
+    diffServMultiFieldClfrDstAddr      InetAddress,
+    diffServMultiFieldClfrDstPrefixLength InetAddressPrefixLength,
+    diffServMultiFieldClfrSrcAddr      InetAddress,
+    diffServMultiFieldClfrSrcPrefixLength InetAddressPrefixLength,
+    diffServMultiFieldClfrDscp         DscpOrAny,
+    diffServMultiFieldClfrFlowId       Unsigned32,
+    diffServMultiFieldClfrProtocol     Unsigned32,
+    diffServMultiFieldClfrDstL4PortMin InetPortNumber,
+    diffServMultiFieldClfrDstL4PortMax InetPortNumber,
+    diffServMultiFieldClfrSrcL4PortMin InetPortNumber,
+    diffServMultiFieldClfrSrcL4PortMax InetPortNumber,
+    diffServMultiFieldClfrStorage      StorageType,
+    diffServMultiFieldClfrStatus       RowStatus
+}
+
+diffServMultiFieldClfrId OBJECT-TYPE
+    SYNTAX         IndexInteger
+    MAX-ACCESS     not-accessible
+    STATUS     current
+    DESCRIPTION
+       "An index that enumerates the MultiField Classifier filter
+       entries.  Managers obtain new values for row creation in this
+       table by reading diffServMultiFieldClfrNextFree."
+    ::= { diffServMultiFieldClfrEntry 1 }
+
+diffServMultiFieldClfrAddrType OBJECT-TYPE
+    SYNTAX         InetAddressType
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The type of IP address used by this classifier entry.  While
+       other types of addresses are defined in the InetAddressType
+
+       textual convention, and DNS names, a classifier can only look at
+       packets on the wire. Therefore, this object is limited to IPv4
+       and IPv6 addresses."
+    ::= { diffServMultiFieldClfrEntry 2 }
+
+diffServMultiFieldClfrDstAddr OBJECT-TYPE
+    SYNTAX         InetAddress
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The IP address to match against the packet's destination IP
+       address. This may not be a DNS name, but may be an IPv4 or IPv6
+       prefix.  diffServMultiFieldClfrDstPrefixLength indicates the
+       number of bits that are relevant."
+    ::= { diffServMultiFieldClfrEntry 3 }
+
+diffServMultiFieldClfrDstPrefixLength OBJECT-TYPE
+    SYNTAX         InetAddressPrefixLength
+    UNITS          "bits"
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The length of the CIDR Prefix carried in
+       diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0
+       indicates a match of any address; a length of 32 indicates a
+       match of a single host address, and a length between 0 and 32
+       indicates the use of a CIDR Prefix. IPv6 is similar, except that
+       prefix lengths range from 0..128."
+    DEFVAL         { 0 }
+    ::= { diffServMultiFieldClfrEntry 4 }
+
+diffServMultiFieldClfrSrcAddr OBJECT-TYPE
+    SYNTAX         InetAddress
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The IP address to match against the packet's source IP address.
+       This may not be a DNS name, but may be an IPv4 or IPv6 prefix.
+       diffServMultiFieldClfrSrcPrefixLength indicates the number of
+       bits that are relevant."
+    ::= { diffServMultiFieldClfrEntry 5 }
+
+diffServMultiFieldClfrSrcPrefixLength OBJECT-TYPE
+    SYNTAX         InetAddressPrefixLength
+    UNITS          "bits"
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The length of the CIDR Prefix carried in
+       diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0
+       indicates a match of any address; a length of 32 indicates a
+       match of a single host address, and a length between 0 and 32
+       indicates the use of a CIDR Prefix. IPv6 is similar, except that
+       prefix lengths range from 0..128."
+    DEFVAL         { 0 }
+    ::= { diffServMultiFieldClfrEntry 6 }
+
+diffServMultiFieldClfrDscp OBJECT-TYPE
+    SYNTAX         DscpOrAny
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The value that the DSCP in the packet must have to match this
+       entry. A value of -1 indicates that a specific DSCP value has not
+       been defined and thus all DSCP values are considered a match."
+    DEFVAL         { -1 }
+    ::= { diffServMultiFieldClfrEntry 7 }
+
+diffServMultiFieldClfrFlowId OBJECT-TYPE
+    SYNTAX         Unsigned32 (0..1048575)
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The flow identifier in an IPv6 header."
+    ::= { diffServMultiFieldClfrEntry 8 }
+
+diffServMultiFieldClfrProtocol OBJECT-TYPE
+    SYNTAX         Unsigned32 (0..255)
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The IP protocol to match against the IPv4 protocol number or the
+       IPv6 Next- Header number in the packet. A value of 255 means
+       match all.  Note the protocol number of 255 is reserved by IANA,
+       and Next-Header number of 0 is used in IPv6."
+    DEFVAL         { 255 }
+    ::= { diffServMultiFieldClfrEntry 9 }
+
+diffServMultiFieldClfrDstL4PortMin OBJECT-TYPE
+    SYNTAX         InetPortNumber
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The minimum value that the layer-4 destination port number in
+       the packet must have in order to match this classifier entry."
+    DEFVAL         { 0 }
+    ::= { diffServMultiFieldClfrEntry 10 }
+
+diffServMultiFieldClfrDstL4PortMax OBJECT-TYPE
+    SYNTAX         InetPortNumber
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The maximum value that the layer-4 destination port number in
+       the packet must have in order to match this classifier entry.
+       This value must be equal to or greater than the value specified
+       for this entry in diffServMultiFieldClfrDstL4PortMin."
+    DEFVAL         { 65535 }
+    ::= { diffServMultiFieldClfrEntry 11 }
+
+diffServMultiFieldClfrSrcL4PortMin OBJECT-TYPE
+    SYNTAX         InetPortNumber
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The minimum value that the layer-4 source port number in the
+       packet must have in order to match this classifier entry."
+    DEFVAL         { 0 }
+    ::= { diffServMultiFieldClfrEntry 12 }
+
+diffServMultiFieldClfrSrcL4PortMax OBJECT-TYPE
+    SYNTAX         InetPortNumber
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+       "The maximum value that the layer-4 source port number in the
+       packet must have in order to match this classifier entry. This
+       value must be equal to or greater than the value specified for
+       this entry in diffServMultiFieldClfrSrcL4PortMin."
+    DEFVAL         { 65535 }
+    ::= { diffServMultiFieldClfrEntry 13 }
+
+diffServMultiFieldClfrStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServMultiFieldClfrEntry 14 }
+
+diffServMultiFieldClfrStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServMultiFieldClfrEntry 15 }
+
+--
+-- Meters
+--
+
+diffServMeter          OBJECT IDENTIFIER ::= { diffServMIBObjects 3 }
+
+--
+-- This MIB supports a variety of Meters.  It includes a specific
+-- definition for Token Bucket Meter, which are but one type of
+-- specification. Other metering parameter sets can be defined in other
+-- MIBs.
+
+-- Multiple meter elements may be logically cascaded using their
+-- diffServMeterSucceedNext and diffServMeterFailNext pointers if
+-- required. One example of this might be for an AF PHB implementation
+-- that uses multiple level conformance meters.
+
+-- Cascading of individual meter elements in the MIB is intended to be
+-- functionally equivalent to multiple level conformance determination
+-- of a packet.  The sequential nature of the representation is merely
+-- a notational convenience for this MIB.
+
+-- srTCM meters (RFC 2697) can be specified using two sets of
+-- diffServMeterEntry and diffServTBParamEntry. The first set specifies
+-- the Committed Information Rate and Committed Burst Size
+-- token-bucket.  The second set specifies the Excess Burst Size
+-- token-bucket.
+
+-- trTCM meters (RFC 2698) can be specified using two sets of
+-- diffServMeterEntry and diffServTBParamEntry. The first set specifies
+-- the Committed Information Rate and Committed Burst Size
+-- token-bucket.  The second set specifies the Peak Information Rate
+-- and Peak Burst Size token-bucket.
+
+-- tswTCM meters (RFC 2859) can be specified using two sets of
+-- diffServMeterEntry and diffServTBParamEntry. The first set specifies
+-- the Committed Target Rate token-bucket.  The second set specifies
+
+-- the Peak Target Rate token-bucket. diffServTBParamInterval in each
+-- token bucket reflects the Average Interval.
+--
+
+diffServMeterNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServMeterId, or a
+       zero to indicate that none exist."
+    ::= { diffServMeter 1 }
+
+diffServMeterTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServMeterEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table enumerates specific meters that a system may use to
+       police a stream of traffic. The traffic stream to be metered is
+       determined by the Differentiated Services Functional Data Path
+       Element(s) upstream of the meter i.e. by the object(s) that point
+       to each entry in this table.  This may include all traffic on an
+       interface.
+
+       Specific meter details are to be found in table entry referenced
+       by diffServMeterSpecific."
+    ::= { diffServMeter 2 }
+
+diffServMeterEntry OBJECT-TYPE
+    SYNTAX       DiffServMeterEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the meter table describes a single conformance level
+       of a meter."
+    INDEX { diffServMeterId }
+    ::= { diffServMeterTable 1 }
+
+DiffServMeterEntry ::= SEQUENCE  {
+    diffServMeterId                IndexInteger,
+    diffServMeterSucceedNext       RowPointer,
+    diffServMeterFailNext          RowPointer,
+    diffServMeterSpecific          RowPointer,
+    diffServMeterStorage           StorageType,
+    diffServMeterStatus            RowStatus
+}
+
+diffServMeterId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Meter entries.  Managers obtain new
+       values for row creation in this table by reading
+       diffServMeterNextFree."
+    ::= { diffServMeterEntry 1 }
+
+diffServMeterSucceedNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "If the traffic does conform, this selects the next
+       Differentiated Services Functional Data Path element to handle
+       traffic for this data path. This RowPointer should point to an
+       instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+         diffServActionEntry
+         diffServAlgDropEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates that no
+       further Differentiated Services treatment is performed on traffic
+       of this data path. The use of zeroDotZero is the normal usage for
+       the last functional data path element of the current data path.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    DEFVAL      { zeroDotZero }
+    ::= { diffServMeterEntry 2 }
+
+diffServMeterFailNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "If the traffic does not conform, this selects the next
+       Differentiated Services Functional Data Path element to handle
+       traffic for this data path. This RowPointer should point to an
+       instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+
+         diffServActionEntry
+         diffServAlgDropEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates no further
+       Differentiated Services treatment is performed on traffic of this
+       data path. The use of zeroDotZero is the normal usage for the
+       last functional data path element of the current data path.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    DEFVAL      { zeroDotZero }
+    ::= { diffServMeterEntry 3 }
+
+diffServMeterSpecific OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This indicates the behavior of the meter by pointing to an entry
+       containing detailed parameters. Note that entries in that
+       specific table must be managed explicitly.
+
+       For example, diffServMeterSpecific may point to an entry in
+       diffServTBParamTable, which contains an instance of a single set
+       of Token Bucket parameters.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the meter always succeeds."
+    ::= { diffServMeterEntry 4 }
+
+diffServMeterStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServMeterEntry 5 }
+
+diffServMeterStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServMeterEntry 6 }
+
+--
+-- Token Bucket Parameter Table
+--
+
+diffServTBParam        OBJECT IDENTIFIER ::= { diffServMIBObjects 4 }
+
+-- Each entry in the Token Bucket Parameter Table parameterize a single
+-- token bucket.  Multiple token buckets can be used together to
+-- parameterize multiple levels of conformance.
+
+-- Note that an entry in the Token Bucket Parameter Table can be shared
+-- by multiple diffServMeterTable entries.
+--
+
+diffServTBParamNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServTBParamId, or a
+       zero to indicate that none exist."
+    ::= { diffServTBParam 1 }
+
+diffServTBParamTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServTBParamEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table enumerates a single set of token bucket meter
+       parameters that a system may use to police a stream of traffic.
+       Such meters are modeled here as having a single rate and a single
+       burst size. Multiple entries are used when multiple rates/burst
+       sizes are needed."
+    ::= { diffServTBParam 2 }
+
+diffServTBParamEntry OBJECT-TYPE
+    SYNTAX       DiffServTBParamEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry that describes a single set of token bucket
+       parameters."
+    INDEX { diffServTBParamId }
+    ::= { diffServTBParamTable 1 }
+
+DiffServTBParamEntry ::= SEQUENCE  {
+    diffServTBParamId              IndexInteger,
+    diffServTBParamType            AutonomousType,
+    diffServTBParamRate            Unsigned32,
+    diffServTBParamBurstSize       BurstSize,
+    diffServTBParamInterval        Unsigned32,
+    diffServTBParamStorage         StorageType,
+    diffServTBParamStatus          RowStatus
+}
+
+diffServTBParamId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Token Bucket Parameter entries.
+       Managers obtain new values for row creation in this table by
+       reading diffServTBParamNextFree."
+    ::= { diffServTBParamEntry 1 }
+
+diffServTBParamType OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The Metering algorithm associated with the Token Bucket
+       parameters.  zeroDotZero indicates this is unknown.
+
+       Standard values for generic algorithms:
+       diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate,
+       diffServTBParamSrTCMBlind, diffServTBParamSrTCMAware,
+       diffServTBParamTrTCMBlind, diffServTBParamTrTCMAware, and
+       diffServTBParamTswTCM are specified in this MIB as OBJECT-
+       IDENTITYs; additional values may be further specified in other
+       MIBs."
+    ::= { diffServTBParamEntry 2 }
+
+diffServTBParamRate OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "kilobits per second"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The token-bucket rate, in kilobits per second (kbps). This
+       attribute is used for:
+       1. CIR in RFC 2697 for srTCM
+       2. CIR and PIR in RFC 2698 for trTCM
+       3. CTR and PTR in RFC 2859 for TSWTCM
+       4. AverageRate in RFC 3290."
+    ::= { diffServTBParamEntry 3 }
+
+diffServTBParamBurstSize OBJECT-TYPE
+    SYNTAX       BurstSize
+    UNITS        "Bytes"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The maximum number of bytes in a single transmission burst. This
+       attribute is used for:
+       1. CBS and EBS in RFC 2697 for srTCM
+       2. CBS and PBS in RFC 2698 for trTCM
+       3. Burst Size in RFC 3290."
+    ::= { diffServTBParamEntry 4 }
+
+diffServTBParamInterval OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    UNITS        "microseconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The time interval used with the token bucket.  For:
+       1. Average Rate Meter, the Informal Differentiated Services Model
+          section 5.2.1, - Delta.
+       2. Simple Token Bucket Meter, the Informal Differentiated
+          Services Model section 5.1, - time interval t.
+       3. RFC 2859 TSWTCM, - AVG_INTERVAL.
+       4. RFC 2697 srTCM, RFC 2698 trTCM, - token bucket update time
+          interval."
+    ::= { diffServTBParamEntry 5 }
+
+diffServTBParamStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServTBParamEntry 6 }
+
+diffServTBParamStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServTBParamEntry 7 }
+
+--
+-- OIDs for diffServTBParamType definitions.
+--
+
+diffServTBMeters  OBJECT IDENTIFIER ::= { diffServMIBAdmin 1 }
+
+diffServTBParamSimpleTokenBucket OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Two Parameter Token Bucket Meter as described in the Informal
+       Differentiated Services Model section 5.2.3."
+    ::= { diffServTBMeters 1 }
+
+diffServTBParamAvgRate OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Average Rate Meter as described in the Informal Differentiated
+       Services Model section 5.2.1."
+    ::= { diffServTBMeters 2 }
+
+diffServTBParamSrTCMBlind OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Single Rate Three Color Marker Metering as defined by RFC 2697,
+       in the `Color Blind' mode as described by the RFC."
+    REFERENCE
+        "RFC 2697"
+    ::= { diffServTBMeters 3 }
+
+diffServTBParamSrTCMAware OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Single Rate Three Color Marker Metering as defined by RFC 2697,
+       in the `Color Aware' mode as described by the RFC."
+    REFERENCE
+        "RFC 2697"
+    ::= { diffServTBMeters 4 }
+
+diffServTBParamTrTCMBlind OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Two Rate Three Color Marker Metering as defined by RFC 2698, in
+       the `Color Blind' mode as described by the RFC."
+    REFERENCE
+        "RFC 2698"
+    ::= { diffServTBMeters 5 }
+
+diffServTBParamTrTCMAware OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Two Rate Three Color Marker Metering as defined by RFC 2698, in
+       the `Color Aware' mode as described by the RFC."
+    REFERENCE
+        "RFC 2698"
+    ::= { diffServTBMeters 6 }
+
+diffServTBParamTswTCM OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "Time Sliding Window Three Color Marker Metering as defined by
+       RFC 2859."
+    REFERENCE
+        "RFC 2859"
+    ::= { diffServTBMeters 7 }
+
+--
+-- Actions
+--
+
+diffServAction         OBJECT IDENTIFIER ::= { diffServMIBObjects 5 }
+
+--
+-- The Action Table allows enumeration of the different types of
+-- actions to be applied to a traffic flow.
+--
+
+diffServActionNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServActionId, or a
+       zero to indicate that none exist."
+    ::= { diffServAction 1 }
+
+diffServActionTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServActionEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The Action Table enumerates actions that can be performed to a
+       stream of traffic. Multiple actions can be concatenated. For
+       example, traffic exiting from a meter may be counted, marked, and
+       potentially dropped before entering a queue.
+
+       Specific actions are indicated by diffServActionSpecific which
+       points to an entry of a specific action type parameterizing the
+       action in detail."
+    ::= { diffServAction 2 }
+
+diffServActionEntry OBJECT-TYPE
+    SYNTAX       DiffServActionEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Each entry in the action table allows description of one
+       specific action to be applied to traffic."
+    INDEX { diffServActionId }
+    ::= { diffServActionTable 1 }
+
+DiffServActionEntry ::= SEQUENCE  {
+    diffServActionId                IndexInteger,
+    diffServActionInterface         InterfaceIndexOrZero,
+    diffServActionNext              RowPointer,
+    diffServActionSpecific          RowPointer,
+    diffServActionStorage           StorageType,
+    diffServActionStatus            RowStatus
+}
+
+diffServActionId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Action entries.  Managers obtain
+       new values for row creation in this table by reading
+       diffServActionNextFree."
+    ::= { diffServActionEntry 1 }
+
+diffServActionInterface  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    read-create
+     STATUS        current
+     DESCRIPTION
+       "The interface index (value of ifIndex) that this action occurs
+       on. This may be derived from the diffServDataPathStartEntry's
+       index by extension through the various RowPointers. However, as
+       this may be difficult for a network management station, it is
+       placed here as well.  If this is indeterminate, the value is
+       zero.
+
+       This is of especial relevance when reporting the counters which
+       may apply to traffic crossing an interface:
+          diffServCountActOctets,
+          diffServCountActPkts,
+          diffServAlgDropOctets,
+          diffServAlgDropPkts,
+          diffServAlgRandomDropOctets, and
+          diffServAlgRandomDropPkts.
+
+       It is also especially relevant to the queue and scheduler which
+       may be subsequently applied."
+     ::= { diffServActionEntry 2 }
+
+diffServActionNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This selects the next Differentiated Services Functional Data
+       Path Element to handle traffic for this data path. This
+       RowPointer should point to an instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+         diffServActionEntry
+         diffServAlgDropEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates no further
+       Differentiated Services treatment is performed on traffic of this
+       data path. The use of zeroDotZero is the normal usage for the
+       last functional data path element of the current data path.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    DEFVAL      { zeroDotZero }
+    ::= { diffServActionEntry 3 }
+
+diffServActionSpecific OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "A pointer to an object instance providing additional information
+       for the type of action indicated by this action table entry.
+
+       For the standard actions defined by this MIB module, this should
+       point to either a diffServDscpMarkActEntry or a
+       diffServCountActEntry. For other actions, it may point to an
+       object instance defined in some other MIB.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the Meter should be treated as
+       if it were not present.  This may lead to incorrect policy
+       behavior."
+    ::= { diffServActionEntry 4 }
+
+diffServActionStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServActionEntry 5 }
+
+diffServActionStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServActionEntry 6 }
+
+-- DSCP Mark Action Table
+--
+-- Rows of this table are pointed to by diffServActionSpecific to
+-- provide detailed parameters specific to the DSCP Mark action.
+--
+-- A single entry in this table can be shared by multiple
+
+-- diffServActionTable entries.
+--
+
+diffServDscpMarkActTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServDscpMarkActEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table enumerates specific DSCPs used for marking or
+       remarking the DSCP field of IP packets. The entries of this table
+       may be referenced by a diffServActionSpecific attribute."
+    ::= { diffServAction 3 }
+
+diffServDscpMarkActEntry OBJECT-TYPE
+    SYNTAX       DiffServDscpMarkActEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the DSCP mark action table that describes a single
+       DSCP used for marking."
+    INDEX { diffServDscpMarkActDscp }
+    ::= { diffServDscpMarkActTable 1 }
+
+DiffServDscpMarkActEntry ::= SEQUENCE  {
+    diffServDscpMarkActDscp          Dscp
+}
+
+diffServDscpMarkActDscp OBJECT-TYPE
+    SYNTAX       Dscp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The DSCP that this Action will store into the DSCP field of the
+       subject. It is quite possible that the only packets subject to
+       this Action are already marked with this DSCP. Note also that
+       Differentiated Services processing may result in packet being
+       marked on both ingress to a network and on egress from it, and
+       that ingress and egress can occur in the same router."
+    ::= { diffServDscpMarkActEntry 1 }
+
+--
+-- Count Action Table
+--
+-- Because the MIB structure allows multiple cascading
+-- diffServActionEntry be used to describe multiple actions for a data
+-- path, the counter became an optional action type.  In normal
+-- implementation, either a data path has counters or it does not, as
+-- opposed to being configurable. The management entity may choose to
+
+-- read the counter or not.  Hence it is recommended for implementation
+-- that have counters to always configure the count action as the first
+-- of multiple actions.
+--
+
+diffServCountActNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for
+       diffServCountActId, or a zero to indicate that none exist."
+    ::= { diffServAction 4 }
+
+diffServCountActTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServCountActEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains counters for all the traffic passing through
+       an action element."
+    ::= { diffServAction 5 }
+
+diffServCountActEntry OBJECT-TYPE
+    SYNTAX       DiffServCountActEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the count action table describes a single set of
+       traffic counters."
+    INDEX { diffServCountActId }
+    ::= { diffServCountActTable 1 }
+
+DiffServCountActEntry ::= SEQUENCE  {
+    diffServCountActId           IndexInteger,
+    diffServCountActOctets       Counter64,
+    diffServCountActPkts         Counter64,
+    diffServCountActStorage      StorageType,
+    diffServCountActStatus       RowStatus
+}
+
+diffServCountActId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Count Action entries.  Managers
+       obtain new values for row creation in this table by reading
+
+       diffServCountActNextFree."
+    ::= { diffServCountActEntry 1 }
+
+diffServCountActOctets OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of octets at the Action data path element.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system and at other times as
+       indicated by the value of ifCounterDiscontinuityTime on the
+       relevant interface."
+    ::= { diffServCountActEntry 2 }
+
+diffServCountActPkts OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of packets at the Action data path element.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system and at other times as
+       indicated by the value of ifCounterDiscontinuityTime on the
+       relevant interface."
+    ::= { diffServCountActEntry 3 }
+
+diffServCountActStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServCountActEntry 4 }
+
+diffServCountActStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServCountActEntry 5 }
+
+--
+-- Algorithmic Drop Table
+--
+
+diffServAlgDrop        OBJECT IDENTIFIER ::= { diffServMIBObjects 6 }
+
+diffServAlgDropNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServAlgDropId, or a
+       zero to indicate that none exist."
+    ::= { diffServAlgDrop 1 }
+
+diffServAlgDropTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServAlgDropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The algorithmic drop table contains entries describing an
+       element that drops packets according to some algorithm."
+    ::= { diffServAlgDrop 2 }
+
+diffServAlgDropEntry OBJECT-TYPE
+    SYNTAX       DiffServAlgDropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry describes a process that drops packets according to
+       some algorithm. Further details of the algorithm type are to be
+       found in diffServAlgDropType and with more detail parameter entry
+       pointed to by diffServAlgDropSpecific when necessary."
+    INDEX { diffServAlgDropId }
+    ::= { diffServAlgDropTable 1 }
+
+DiffServAlgDropEntry ::= SEQUENCE  {
+    diffServAlgDropId               IndexInteger,
+    diffServAlgDropType             INTEGER,
+    diffServAlgDropNext             RowPointer,
+    diffServAlgDropQMeasure         RowPointer,
+    diffServAlgDropQThreshold       Unsigned32,
+    diffServAlgDropSpecific         RowPointer,
+    diffServAlgDropOctets           Counter64,
+    diffServAlgDropPkts             Counter64,
+    diffServAlgRandomDropOctets     Counter64,
+    diffServAlgRandomDropPkts       Counter64,
+    diffServAlgDropStorage          StorageType,
+    diffServAlgDropStatus           RowStatus
+}
+
+diffServAlgDropId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Algorithmic Dropper entries.
+       Managers obtain new values for row creation in this table by
+       reading diffServAlgDropNextFree."
+    ::= { diffServAlgDropEntry 1 }
+
+diffServAlgDropType OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     other(1),
+                     tailDrop(2),
+                     headDrop(3),
+                     randomDrop(4),
+                     alwaysDrop(5)
+}
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The type of algorithm used by this dropper. The value other(1)
+       requires further specification in some other MIB module.
+
+       In the tailDrop(2) algorithm, diffServAlgDropQThreshold
+       represents the maximum depth of the queue, pointed to by
+       diffServAlgDropQMeasure, beyond which all newly arriving packets
+       will be dropped.
+
+       In the headDrop(3) algorithm, if a packet arrives when the
+       current depth of the queue, pointed to by
+       diffServAlgDropQMeasure, is at diffServAlgDropQThreshold, packets
+       currently at the head of the queue are dropped to make room for
+       the new packet to be enqueued at the tail of the queue.
+
+       In the randomDrop(4) algorithm, on packet arrival, an Active
+       Queue Management algorithm is executed which may randomly drop a
+       packet. This algorithm may be proprietary, and it may drop either
+       the arriving packet or another packet in the queue.
+       diffServAlgDropSpecific points to a diffServRandomDropEntry that
+       describes the algorithm. For this algorithm,
+       diffServAlgDropQThreshold is understood to be the absolute
+       maximum size of the queue and additional parameters are described
+       in diffServRandomDropTable.
+
+       The alwaysDrop(5) algorithm is as its name specifies; always
+       drop. In this case, the other configuration values in this Entry
+       are not meaningful; There is no useful 'next' processing step,
+       there is no queue, and parameters describing the queue are not
+       useful. Therefore, diffServAlgDropNext, diffServAlgDropMeasure,
+       and diffServAlgDropSpecific are all zeroDotZero."
+    ::= { diffServAlgDropEntry 2 }
+
+diffServAlgDropNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This selects the next Differentiated Services Functional Data
+       Path Element to handle traffic for this data path. This
+       RowPointer should point to an instance of one of:
+         diffServClfrEntry
+         diffServMeterEntry
+         diffServActionEntry
+         diffServQEntry
+
+       A value of zeroDotZero in this attribute indicates no further
+       Differentiated Services treatment is performed on traffic of this
+       data path. The use of zeroDotZero is the normal usage for the
+       last functional data path element of the current data path.
+
+       When diffServAlgDropType is alwaysDrop(5), this object is
+       ignored.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServAlgDropEntry 3 }
+
+diffServAlgDropQMeasure OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "Points to an entry in the diffServQTable to indicate the queue
+       that a drop algorithm is to monitor when deciding whether to drop
+       a packet. If the row pointed to does not exist, the algorithmic
+       dropper element is considered inactive.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServAlgDropEntry 4 }
+
+diffServAlgDropQThreshold OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "Bytes"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "A threshold on the depth in bytes of the queue being measured at
+       which a trigger is generated to the dropping algorithm, unless
+       diffServAlgDropType is alwaysDrop(5) where this object is
+       ignored.
+
+       For the tailDrop(2) or headDrop(3) algorithms, this represents
+       the depth of the queue, pointed to by diffServAlgDropQMeasure, at
+       which the drop action will take place. Other algorithms will need
+       to define their own semantics for this threshold."
+    ::= { diffServAlgDropEntry 5 }
+
+diffServAlgDropSpecific OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "Points to a table entry that provides further detail regarding a
+       drop algorithm.
+
+       Entries with diffServAlgDropType equal to other(1) may have this
+       point to a table defined in another MIB module.
+
+       Entries with diffServAlgDropType equal to randomDrop(4) must have
+       this point to an entry in diffServRandomDropTable.
+
+       For all other algorithms specified in this MIB, this should take
+       the value zeroDotZero.
+
+       The diffServAlgDropType is authoritative for the type of the drop
+       algorithm and the specific parameters for the drop algorithm
+       needs to be evaluated based on the diffServAlgDropType.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServAlgDropEntry 6 }
+
+diffServAlgDropOctets OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of octets that have been deterministically dropped by
+       this drop process.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system and at other times as
+       indicated by the value of ifCounterDiscontinuityTime on the
+       relevant interface."
+    ::= { diffServAlgDropEntry 7 }
+
+diffServAlgDropPkts OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of packets that have been deterministically dropped
+       by this drop process.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system and at other times as
+       indicated by the value of ifCounterDiscontinuityTime on the
+       relevant interface."
+    ::= { diffServAlgDropEntry 8 }
+
+diffServAlgRandomDropOctets OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of octets that have been randomly dropped by this
+       drop process.  This counter applies, therefore, only to random
+       droppers.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system and at other times as
+       indicated by the value of ifCounterDiscontinuityTime on the
+       relevant interface."
+    ::= { diffServAlgDropEntry 9 }
+
+diffServAlgRandomDropPkts OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The number of packets that have been randomly dropped by this
+       drop process. This counter applies, therefore, only to random
+       droppers.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system and at other times as
+       indicated by the value of ifCounterDiscontinuityTime on the
+       relevant interface."
+    ::= { diffServAlgDropEntry 10 }
+
+diffServAlgDropStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServAlgDropEntry 11 }
+
+diffServAlgDropStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServAlgDropEntry 12 }
+
+--
+-- Random Drop Table
+--
+
+diffServRandomDropNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServRandomDropId,
+       or a zero to indicate that none exist."
+    ::= { diffServAlgDrop 3 }
+
+diffServRandomDropTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServRandomDropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The random drop table contains entries describing a process that
+       drops packets randomly. Entries in this table are pointed to by
+       diffServAlgDropSpecific."
+    ::= { diffServAlgDrop 4 }
+
+diffServRandomDropEntry OBJECT-TYPE
+    SYNTAX       DiffServRandomDropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry describes a process that drops packets according to a
+       random algorithm."
+    INDEX { diffServRandomDropId }
+    ::= { diffServRandomDropTable 1 }
+
+DiffServRandomDropEntry ::= SEQUENCE  {
+    diffServRandomDropId               IndexInteger,
+    diffServRandomDropMinThreshBytes   Unsigned32,
+    diffServRandomDropMinThreshPkts    Unsigned32,
+    diffServRandomDropMaxThreshBytes   Unsigned32,
+    diffServRandomDropMaxThreshPkts    Unsigned32,
+    diffServRandomDropProbMax          Unsigned32,
+    diffServRandomDropWeight           Unsigned32,
+    diffServRandomDropSamplingRate     Unsigned32,
+    diffServRandomDropStorage          StorageType,
+    diffServRandomDropStatus           RowStatus
+}
+
+diffServRandomDropId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Random Drop entries.  Managers
+       obtain new values for row creation in this table by reading
+       diffServRandomDropNextFree."
+    ::= { diffServRandomDropEntry 1 }
+
+diffServRandomDropMinThreshBytes OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "bytes"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The average queue depth in bytes, beyond which traffic has a
+       non-zero probability of being dropped. Changes in this variable
+       may or may not be reflected in the reported value of
+       diffServRandomDropMinThreshPkts."
+    ::= { diffServRandomDropEntry 2 }
+
+diffServRandomDropMinThreshPkts OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "packets"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The average queue depth in packets, beyond which traffic has a
+       non-zero probability of being dropped. Changes in this variable
+       may or may not be reflected in the reported value of
+       diffServRandomDropMinThreshBytes."
+    ::= { diffServRandomDropEntry 3 }
+
+diffServRandomDropMaxThreshBytes OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "bytes"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The average queue depth beyond which traffic has a probability
+       indicated by diffServRandomDropProbMax of being dropped or
+       marked. Note that this differs from the physical queue limit,
+       which is stored in diffServAlgDropQThreshold. Changes in this
+       variable may or may not be reflected in the reported value of
+       diffServRandomDropMaxThreshPkts."
+    ::= { diffServRandomDropEntry 4 }
+
+diffServRandomDropMaxThreshPkts OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "packets"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The average queue depth beyond which traffic has a probability
+       indicated by diffServRandomDropProbMax of being dropped or
+       marked. Note that this differs from the physical queue limit,
+       which is stored in diffServAlgDropQThreshold. Changes in this
+       variable may or may not be reflected in the reported value of
+       diffServRandomDropMaxThreshBytes."
+    ::= { diffServRandomDropEntry 5 }
+
+diffServRandomDropProbMax OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..1000)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The worst case random drop probability, expressed in drops per
+       thousand packets.
+
+       For example, if in the worst case every arriving packet may be
+       dropped (100%) for a period, this has the value 1000.
+       Alternatively, if in the worst case only one percent (1%) of
+       traffic may be dropped, it has the value 10."
+   ::= { diffServRandomDropEntry 6 }
+
+diffServRandomDropWeight OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..65536)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The weighting of past history in affecting the Exponentially
+       Weighted Moving Average function that calculates the current
+       average queue depth.  The equation uses
+       diffServRandomDropWeight/65536 as the coefficient for the new
+       sample in the equation, and (65536 -
+       diffServRandomDropWeight)/65536 as the coefficient of the old
+       value.
+
+       Implementations may limit the values of diffServRandomDropWeight
+       to a subset of the possible range of values, such as powers of
+       two. Doing this would facilitate implementation of the
+       Exponentially Weighted Moving Average using shift instructions or
+       registers."
+    ::= { diffServRandomDropEntry 7 }
+
+diffServRandomDropSamplingRate OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..1000000)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The number of times per second the queue is sampled for queue
+       average calculation.  A value of zero is used to mean that the
+       queue is sampled approximately each time a packet is enqueued (or
+       dequeued)."
+    ::= { diffServRandomDropEntry 8 }
+
+diffServRandomDropStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServRandomDropEntry 9 }
+
+diffServRandomDropStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServRandomDropEntry 10 }
+
+--
+-- Queue Table
+--
+
+diffServQueue          OBJECT IDENTIFIER ::= { diffServMIBObjects 7 }
+
+--
+-- An entry of diffServQTable represents a FIFO queue Differentiated
+-- Services Functional Data Path element as described in the Informal
+-- Differentiated Services Model section 7.1.1. Note that the
+-- specification of scheduling parameters for a queue as part of the
+-- input to a scheduler functional data path element as described in
+-- the Informal Differentiated Services Model section 7.1.2. This
+-- allows building of hierarchical queuing/scheduling. A queue
+-- therefore has these attributes:
+--
+-- 1. Which scheduler will service this queue, diffServQNext.
+-- 2. How the scheduler will service this queue, with respect
+--    to all the other queues the same scheduler needs to service,
+--    diffServQMinRate.
+--
+-- Note that upstream Differentiated Services Functional Data Path
+-- elements may point to a shared diffServQTable entry as described
+-- in the Informal Differentiated Services Model section 7.1.1.
+--
+
+diffServQNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServQId, or a zero
+       to indicate that none exist."
+    ::= { diffServQueue 1 }
+
+diffServQTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServQEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The Queue Table enumerates the individual queues.  Note that the
+       MIB models queuing systems as composed of individual queues, one
+       per class of traffic, even though they may in fact be structured
+       as classes of traffic scheduled using a common calendar queue, or
+       in other ways."
+    ::= { diffServQueue 2 }
+
+diffServQEntry OBJECT-TYPE
+    SYNTAX       DiffServQEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the Queue Table describes a single queue or class of
+       traffic."
+    INDEX { diffServQId }
+    ::= { diffServQTable 1 }
+
+DiffServQEntry ::= SEQUENCE  {
+    diffServQId                      IndexInteger,
+    diffServQNext                    RowPointer,
+    diffServQMinRate                 RowPointer,
+    diffServQMaxRate                 RowPointer,
+    diffServQStorage                 StorageType,
+    diffServQStatus                  RowStatus
+}
+
+diffServQId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Queue entries.  Managers obtain new
+       values for row creation in this table by reading
+       diffServQNextFree."
+    ::= { diffServQEntry 1 }
+
+diffServQNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This selects the next Differentiated Services Scheduler.  The
+       RowPointer must point to a diffServSchedulerEntry.
+
+       A value of zeroDotZero in this attribute indicates an incomplete
+       diffServQEntry instance. In such a case, the entry has no
+       operational effect, since it has no parameters to give it
+       meaning.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServQEntry 2 }
+
+diffServQMinRate OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This RowPointer indicates the diffServMinRateEntry that the
+       scheduler, pointed to by diffServQNext, should use to service
+       this queue.
+
+       If the row pointed to is zeroDotZero, the minimum rate and
+       priority is unspecified.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServQEntry 3 }
+
+diffServQMaxRate OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This RowPointer indicates the diffServMaxRateEntry that the
+       scheduler, pointed to by diffServQNext, should use to service
+       this queue.
+
+       If the row pointed to is zeroDotZero, the maximum rate is the
+       line speed of the interface.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    ::= { diffServQEntry 4 }
+
+diffServQStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServQEntry 5 }
+
+diffServQStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServQEntry 6 }
+
+--
+-- Scheduler Table
+--
+
+diffServScheduler      OBJECT IDENTIFIER ::= { diffServMIBObjects 8 }
+
+--
+-- A Scheduler Entry represents a packet scheduler, such as a priority
+-- scheduler or a WFQ scheduler. It provides flexibility for multiple
+-- scheduling algorithms, each servicing multiple queues, to be used on
+-- the same logical/physical interface.
+--
+-- Note that upstream queues or schedulers specify several of the
+-- scheduler's parameters. These must be properly specified if the
+-- scheduler is to behave as expected.
+--
+-- The diffServSchedulerMaxRate attribute specifies the parameters when
+-- a scheduler's output is sent to another scheduler. This is used in
+-- building hierarchical queues or schedulers.
+
+--
+-- More discussion of the scheduler functional data path element is in
+-- the Informal Differentiated Services Model section 7.1.2.
+--
+
+diffServSchedulerNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServSchedulerId, or
+       a zero to indicate that none exist."
+    ::= { diffServScheduler 1 }
+
+diffServSchedulerTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServSchedulerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The Scheduler Table enumerates packet schedulers. Multiple
+       scheduling algorithms can be used on a given data path, with each
+       algorithm described by one diffServSchedulerEntry."
+    ::= { diffServScheduler 2 }
+
+diffServSchedulerEntry OBJECT-TYPE
+    SYNTAX       DiffServSchedulerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the Scheduler Table describing a single instance of
+       a scheduling algorithm."
+    INDEX { diffServSchedulerId }
+    ::= { diffServSchedulerTable 1 }
+
+DiffServSchedulerEntry ::= SEQUENCE  {
+    diffServSchedulerId                   IndexInteger,
+    diffServSchedulerNext                 RowPointer,
+    diffServSchedulerMethod               AutonomousType,
+    diffServSchedulerMinRate              RowPointer,
+    diffServSchedulerMaxRate              RowPointer,
+    diffServSchedulerStorage              StorageType,
+    diffServSchedulerStatus               RowStatus
+}
+
+diffServSchedulerId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Scheduler entries.  Managers obtain
+       new values for row creation in this table by reading
+       diffServSchedulerNextFree."
+    ::= { diffServSchedulerEntry 1 }
+
+diffServSchedulerNext OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This selects the next Differentiated Services Functional Data
+       Path Element to handle traffic for this data path. This normally
+       is null (zeroDotZero), or points to a diffServSchedulerEntry or a
+       diffServQEntry.
+
+       However, this RowPointer may also point to an instance of:
+         diffServClfrEntry,
+         diffServMeterEntry,
+         diffServActionEntry,
+         diffServAlgDropEntry.
+
+       It would point another diffServSchedulerEntry when implementing
+       multiple scheduler methods for the same data path, such as having
+       one set of queues scheduled by WRR and that group participating
+       in a priority scheduling system in which other queues compete
+       with it in that way.  It might also point to a second scheduler
+       in a hierarchical scheduling system.
+
+       If the row pointed to is zeroDotZero, no further Differentiated
+       Services treatment is performed on traffic of this data path.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    DEFVAL       { zeroDotZero }
+    ::= { diffServSchedulerEntry 2 }
+
+diffServSchedulerMethod OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The scheduling algorithm used by this Scheduler. zeroDotZero
+       indicates that this is unknown.  Standard values for generic
+       algorithms: diffServSchedulerPriority, diffServSchedulerWRR, and
+       diffServSchedulerWFQ are specified in this MIB; additional values
+
+       may be further specified in other MIBs."
+    ::= { diffServSchedulerEntry 3 }
+
+diffServSchedulerMinRate OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This RowPointer indicates the entry in diffServMinRateTable
+       which indicates the priority or minimum output rate from this
+       scheduler. This attribute is used only when there is more than
+       one level of scheduler.
+
+       When it has the value zeroDotZero, it indicates that no minimum
+       rate or priority is imposed.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    DEFVAL      { zeroDotZero }
+    ::= { diffServSchedulerEntry 4 }
+
+diffServSchedulerMaxRate OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This RowPointer indicates the entry in diffServMaxRateTable
+       which indicates the maximum output rate from this scheduler.
+       When more than one maximum rate applies (eg, when a multi-rate
+       shaper is in view), it points to the first of those rate entries.
+       This attribute is used only when there is more than one level of
+       scheduler.
+
+       When it has the value zeroDotZero, it indicates that no maximum
+       rate is imposed.
+
+       Setting this to point to a target that does not exist results in
+       an inconsistentValue error.  If the row pointed to is removed or
+       becomes inactive by other means, the treatment is as if this
+       attribute contains a value of zeroDotZero."
+    DEFVAL      { zeroDotZero }
+    ::= { diffServSchedulerEntry 5 }
+
+diffServSchedulerStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServSchedulerEntry 6 }
+
+diffServSchedulerStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServSchedulerEntry 7 }
+
+--
+-- OIDs for diffServTBParamType definitions.
+--
+
+diffServSchedulers  OBJECT IDENTIFIER ::= { diffServMIBAdmin 2 }
+
+diffServSchedulerPriority OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "For use with diffServSchedulerMethod to indicate the Priority
+       scheduling method.  This is defined as an algorithm in which the
+       presence of data in a queue or set of queues absolutely precludes
+       dequeue from another queue or set of queues of lower priority.
+       Note that attributes from diffServMinRateEntry of the
+       queues/schedulers feeding this scheduler are used when
+       determining the next packet to schedule."
+    ::= { diffServSchedulers 1 }
+
+diffServSchedulerWRR OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "For use with diffServSchedulerMethod to indicate the Weighted
+       Round Robin scheduling method, defined as any algorithm in which
+       a set of queues are visited in a fixed order, and varying amounts
+       of traffic are removed from each queue in turn to implement an
+       average output rate by class. Notice attributes from
+       diffServMinRateEntry of the queues/schedulers feeding this
+       scheduler are used when determining the next packet to schedule."
+    ::= { diffServSchedulers 2 }
+
+diffServSchedulerWFQ OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+       "For use with diffServSchedulerMethod to indicate the Weighted
+       Fair Queuing scheduling method, defined as any algorithm in which
+       a set of queues are conceptually visited in some order, to
+       implement an average output rate by class. Notice attributes from
+       diffServMinRateEntry of the queues/schedulers feeding this
+       scheduler are used when determining the next packet to schedule."
+    ::= { diffServSchedulers 3 }
+
+--
+-- Minimum Rate Parameters Table
+--
+-- The parameters used by a scheduler for its inputs or outputs are
+-- maintained separately from the Queue or Scheduler table entries for
+-- reusability reasons and so that they may be used by both queues and
+-- schedulers.  This follows the approach for separation of data path
+-- elements from parameterization that is used throughout this MIB.
+-- Use of these Minimum Rate Parameter Table entries by Queues and
+-- Schedulers allows the modeling of hierarchical scheduling systems.
+--
+-- Specifically, a Scheduler has one or more inputs and one output.
+-- Any queue feeding a scheduler, or any scheduler which feeds a second
+-- scheduler, might specify a minimum transfer rate by pointing to an
+-- Minimum Rate Parameter Table entry.
+--
+-- The diffServMinRatePriority/Abs/Rel attributes are used as
+-- parameters to the work-conserving portion of a scheduler:
+-- "work-conserving" implies that the scheduler can continue to emit
+-- data as long as there is data available at its input(s).  This has
+-- the effect of guaranteeing a certain priority relative to other
+-- scheduler inputs and/or a certain minimum proportion of the
+-- available output bandwidth. Properly configured, this means a
+-- certain minimum rate, which may be exceeded should traffic be
+-- available should there be spare bandwidth after all other classes
+-- have had opportunities to consume their own minimum rates.
+--
+
+diffServMinRateNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServMinRateId, or a
+       zero to indicate that none exist."
+    ::= { diffServScheduler 3 }
+
+diffServMinRateTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServMinRateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The Minimum Rate Parameters Table enumerates individual sets of
+       scheduling parameter that can be used/reused by Queues and
+       Schedulers."
+    ::= { diffServScheduler 4 }
+
+diffServMinRateEntry OBJECT-TYPE
+    SYNTAX       DiffServMinRateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the Minimum Rate Parameters Table describes a single
+       set of scheduling parameters for use by one or more queues or
+       schedulers."
+    INDEX { diffServMinRateId }
+    ::= { diffServMinRateTable 1 }
+
+DiffServMinRateEntry ::= SEQUENCE  {
+    diffServMinRateId              IndexInteger,
+    diffServMinRatePriority        Unsigned32,
+    diffServMinRateAbsolute        Unsigned32,
+    diffServMinRateRelative        Unsigned32,
+    diffServMinRateStorage         StorageType,
+    diffServMinRateStatus          RowStatus
+}
+
+diffServMinRateId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Scheduler Parameter entries.
+       Managers obtain new values for row creation in this table by
+       reading diffServMinRateNextFree."
+    ::= { diffServMinRateEntry 1 }
+
+diffServMinRatePriority OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The priority of this input to the associated scheduler, relative
+
+       to the scheduler's other inputs. A queue or scheduler with a
+       larger numeric value will be served before another with a smaller
+       numeric value."
+    ::= { diffServMinRateEntry 2 }
+
+diffServMinRateAbsolute OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "kilobits per second"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The minimum absolute rate, in kilobits/sec, that a downstream
+       scheduler element should allocate to this queue. If the value is
+       zero, then there is effectively no minimum rate guarantee. If the
+       value is non-zero, the scheduler will assure the servicing of
+       this queue to at least this rate.
+
+       Note that this attribute value and that of
+       diffServMinRateRelative are coupled: changes to one will affect
+       the value of the other. They are linked by the following
+       equation, in that setting one will change the other:
+
+         diffServMinRateRelative =
+                 (diffServMinRateAbsolute*1000000)/ifSpeed
+
+       or, if appropriate:
+
+         diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed"
+    REFERENCE
+        "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
+    ::= { diffServMinRateEntry 3 }
+
+diffServMinRateRelative OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The minimum rate that a downstream scheduler element should
+       allocate to this queue, relative to the maximum rate of the
+       interface as reported by ifSpeed or ifHighSpeed, in units of
+       1/1000 of 1. If the value is zero, then there is effectively no
+       minimum rate guarantee. If the value is non-zero, the scheduler
+       will assure the servicing of this queue to at least this rate.
+
+       Note that this attribute value and that of
+       diffServMinRateAbsolute are coupled: changes to one will affect
+       the value of the other. They are linked by the following
+       equation, in that setting one will change the other:
+
+         diffServMinRateRelative =
+                 (diffServMinRateAbsolute*1000000)/ifSpeed
+
+       or, if appropriate:
+
+         diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed"
+    REFERENCE
+        "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
+    ::= { diffServMinRateEntry 4 }
+
+diffServMinRateStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServMinRateEntry 5 }
+
+diffServMinRateStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServMinRateEntry 6 }
+
+--
+-- Maximum Rate Parameter Table
+--
+-- The parameters used by a scheduler for its inputs or outputs are
+-- maintained separately from the Queue or Scheduler table entries for
+-- reusability reasons and so that they may be used by both queues and
+-- schedulers.  This follows the approach for separation of data path
+-- elements from parameterization that is used throughout this MIB.
+-- Use of these Maximum Rate Parameter Table entries by Queues and
+-- Schedulers allows the modeling of hierarchical scheduling systems.
+--
+-- Specifically, a Scheduler has one or more inputs and one output.
+-- Any queue feeding a scheduler, or any scheduler which feeds a second
+-- scheduler, might specify a maximum transfer rate by pointing to a
+-- Maximum Rate Parameter Table entry. Multi-rate shapers, such as a
+
+-- Dual Leaky Bucket algorithm, specify their rates using multiple
+-- Maximum Rate Parameter Entries with the same diffServMaxRateId but
+-- different diffServMaxRateLevels.
+--
+-- The diffServMaxRateLevel/Abs/Rel attributes are used as
+-- parameters to the non-work-conserving portion of a scheduler:
+-- non-work-conserving implies that the scheduler may sometimes not
+-- emit a packet, even if there is data available at its input(s).
+-- This has the effect of limiting the servicing of the queue/scheduler
+-- input or output, in effect performing shaping of the packet stream
+-- passing through the queue/scheduler, as described in the Informal
+-- Differentiated Services Model section 7.2.
+--
+
+diffServMaxRateNextFree OBJECT-TYPE
+    SYNTAX       IndexIntegerNextFree
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "This object contains an unused value for diffServMaxRateId, or a
+       zero to indicate that none exist."
+    ::= { diffServScheduler 5 }
+
+diffServMaxRateTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF DiffServMaxRateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "The Maximum Rate Parameter Table enumerates individual sets of
+       scheduling parameter that can be used/reused by Queues and
+       Schedulers."
+    ::= { diffServScheduler 6 }
+
+diffServMaxRateEntry OBJECT-TYPE
+    SYNTAX       DiffServMaxRateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An entry in the Maximum Rate Parameter Table describes a single
+       set of scheduling parameters for use by one or more queues or
+       schedulers."
+    INDEX { diffServMaxRateId, diffServMaxRateLevel }
+    ::= { diffServMaxRateTable 1 }
+
+DiffServMaxRateEntry ::= SEQUENCE  {
+    diffServMaxRateId              IndexInteger,
+    diffServMaxRateLevel           Unsigned32,
+    diffServMaxRateAbsolute        Unsigned32,
+    diffServMaxRateRelative        Unsigned32,
+    diffServMaxRateThreshold       BurstSize,
+    diffServMaxRateStorage         StorageType,
+    diffServMaxRateStatus          RowStatus
+}
+
+diffServMaxRateId OBJECT-TYPE
+    SYNTAX       IndexInteger
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that enumerates the Maximum Rate Parameter entries.
+       Managers obtain new values for row creation in this table by
+       reading diffServMaxRateNextFree."
+    ::= { diffServMaxRateEntry 1 }
+
+diffServMaxRateLevel OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..32)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "An index that indicates which level of a multi-rate shaper is
+       being given its parameters. A multi-rate shaper has some number
+       of rate levels. Frame Relay's dual rate specification refers to a
+       'committed' and an 'excess' rate; ATM's dual rate specification
+       refers to a 'mean' and a 'peak' rate. This table is generalized
+       to support an arbitrary number of rates. The committed or mean
+       rate is level 1, the peak rate (if any) is the highest level rate
+       configured, and if there are other rates they are distributed in
+       monotonically increasing order between them."
+    ::= { diffServMaxRateEntry 2 }
+
+diffServMaxRateAbsolute OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    UNITS        "kilobits per second"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The maximum rate in kilobits/sec that a downstream scheduler
+       element should allocate to this queue. If the value is zero, then
+       there is effectively no maximum rate limit and that the scheduler
+       should attempt to be work conserving for this queue. If the value
+       is non-zero, the scheduler will limit the servicing of this queue
+       to, at most, this rate in a non-work-conserving manner.
+
+       Note that this attribute value and that of
+       diffServMaxRateRelative are coupled: changes to one will affect
+       the value of the other. They are linked by the following
+
+       equation, in that setting one will change the other:
+
+         diffServMaxRateRelative =
+                 (diffServMaxRateAbsolute*1000000)/ifSpeed
+
+       or, if appropriate:
+
+         diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed"
+    REFERENCE
+        "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
+    ::= { diffServMaxRateEntry 3 }
+
+diffServMaxRateRelative OBJECT-TYPE
+    SYNTAX       Unsigned32  (1..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The maximum rate that a downstream scheduler element should
+       allocate to this queue, relative to the maximum rate of the
+       interface as reported by ifSpeed or ifHighSpeed, in units of
+       1/1000 of 1. If the value is zero, then there is effectively no
+       maximum rate limit and the scheduler should attempt to be work
+       conserving for this queue. If the value is non-zero, the
+       scheduler will limit the servicing of this queue to, at most,
+       this rate in a non-work-conserving manner.
+
+       Note that this attribute value and that of
+       diffServMaxRateAbsolute are coupled: changes to one will affect
+       the value of the other. They are linked by the following
+       equation, in that setting one will change the other:
+
+         diffServMaxRateRelative =
+                 (diffServMaxRateAbsolute*1000000)/ifSpeed
+
+       or, if appropriate:
+
+         diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed"
+    REFERENCE
+        "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863"
+    ::= { diffServMaxRateEntry 4 }
+
+diffServMaxRateThreshold OBJECT-TYPE
+    SYNTAX       BurstSize
+    UNITS        "Bytes"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The number of bytes of queue depth at which the rate of a
+
+       multi-rate scheduler will increase to the next output rate. In
+       the last conceptual row for such a shaper, this threshold is
+       ignored and by convention is zero."
+    REFERENCE
+        "Adaptive rate Shaper, RFC 2963"
+    ::= { diffServMaxRateEntry 5 }
+
+diffServMaxRateStorage OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The storage type for this conceptual row.  Conceptual rows
+       having the value 'permanent' need not allow write-access to any
+       columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { diffServMaxRateEntry 6 }
+
+diffServMaxRateStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The status of this conceptual row. All writable objects in this
+       row may be modified at any time. Setting this variable to
+       'destroy' when the MIB contains one or more RowPointers pointing
+       to it results in destruction being delayed until the row is no
+       longer used."
+    ::= { diffServMaxRateEntry 7 }
+
+--
+-- MIB Compliance statements.
+--
+
+diffServMIBCompliances OBJECT IDENTIFIER ::=
+                                     { diffServMIBConformance 1 }
+diffServMIBGroups      OBJECT IDENTIFIER ::=
+                                     { diffServMIBConformance 2 }
+
+diffServMIBFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "When this MIB is implemented with support for read-create, then
+       such an implementation can claim full compliance. Such devices
+       can then be both monitored and configured with this MIB."
+
+    MODULE IF-MIB -- The interfaces MIB, RFC2863
+    MANDATORY-GROUPS {
+
+       ifCounterDiscontinuityGroup
+    }
+
+    MODULE -- This Module
+    MANDATORY-GROUPS {
+        diffServMIBDataPathGroup, diffServMIBClfrGroup,
+        diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup,
+        diffServMIBActionGroup, diffServMIBAlgDropGroup,
+        diffServMIBQGroup, diffServMIBSchedulerGroup,
+        diffServMIBMaxRateGroup, diffServMIBMinRateGroup,
+        diffServMIBCounterGroup
+    }
+
+    GROUP diffServMIBMeterGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement metering
+       functions."
+
+    GROUP diffServMIBTBParamGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement token-bucket
+       metering functions."
+
+    GROUP diffServMIBDscpMarkActGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement DSCP-Marking
+       functions."
+
+    GROUP diffServMIBRandomDropGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement Random Drop
+       functions."
+
+    OBJECT diffServDataPathStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServClfrStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServClfrElementStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServMultiFieldClfrAddrType
+    SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support IPv4 and IPv6
+       addresses."
+
+    OBJECT diffServMultiFieldClfrDstAddr
+    SYNTAX  InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+       "An implementation is only required to support IPv4 and globally
+       unique IPv6 addresses."
+
+    OBJECT diffServAlgDropStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServRandomDropStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServQStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServSchedulerStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServMinRateStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT diffServMaxRateStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+    ::= { diffServMIBCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+diffServMIBReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "When this MIB is implemented without support for read-create
+       (i.e. in read-only mode), then such an implementation can claim
+       read-only compliance. Such a device can then be monitored but can
+       not be configured with this MIB."
+
+    MODULE IF-MIB -- The interfaces MIB, RFC2863
+    MANDATORY-GROUPS {
+       ifCounterDiscontinuityGroup
+    }
+
+    MODULE -- This Module
+    MANDATORY-GROUPS {
+        diffServMIBDataPathGroup, diffServMIBClfrGroup,
+        diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup,
+        diffServMIBActionGroup, diffServMIBAlgDropGroup,
+        diffServMIBQGroup, diffServMIBSchedulerGroup,
+        diffServMIBMaxRateGroup, diffServMIBMinRateGroup,
+        diffServMIBCounterGroup
+    }
+
+    GROUP diffServMIBMeterGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement metering
+       functions."
+
+    GROUP diffServMIBTBParamGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement token-bucket
+       metering functions."
+
+    GROUP        diffServMIBDscpMarkActGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement DSCP-Marking
+       functions."
+
+    GROUP        diffServMIBRandomDropGroup
+    DESCRIPTION
+       "This group is mandatory for devices that implement Random Drop
+       functions."
+
+    OBJECT       diffServDataPathStart
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServDataPathStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServDataPathStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServClfrNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object not needed when diffServClfrTable is implemented read-
+       only"
+
+    OBJECT       diffServClfrStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServClfrStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServClfrElementNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object not needed when diffServClfrelementTable is implemented
+       read-only"
+
+    OBJECT       diffServClfrElementPrecedence
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServClfrElementNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServClfrElementSpecific
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServClfrElementStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServClfrElementStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServMultiFieldClfrNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServMultiFieldClfrTable is
+       implemented in read-only mode."
+
+    OBJECT       diffServMultiFieldClfrAddrType
+    SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required. An implementation is only required
+       to support IPv4 and IPv6 addresses."
+
+    OBJECT       diffServMultiFieldClfrDstAddr
+    SYNTAX       InetAddress (SIZE(0|4|16))
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required. An implementation is only required
+       to support IPv4 and globally unique IPv6 addresses."
+
+    OBJECT       diffServMultiFieldClfrDstPrefixLength
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrSrcAddr
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required. An implementation is only required
+       to support IPv4 and globally unique IPv6 addresses."
+
+    OBJECT       diffServMultiFieldClfrSrcPrefixLength
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrDscp
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrFlowId
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrProtocol
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrDstL4PortMin
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrDstL4PortMax
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrSrcL4PortMin
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrSrcL4PortMax
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMultiFieldClfrStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, createAndWait and notInService
+       support is not required."
+
+    OBJECT       diffServMeterNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServMultiFieldClfrTable is
+       implemented in read-only mode."
+
+    OBJECT       diffServMeterSucceedNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMeterFailNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMeterSpecific
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMeterStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMeterStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServTBParamNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServTBParamTable is implemented in
+       read-only mode."
+
+    OBJECT       diffServTBParamType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServTBParamRate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServTBParamBurstSize
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServTBParamInterval
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServTBParamStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServTBParamStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServActionNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServActionTable is implemented in
+       read-only mode."
+
+    OBJECT       diffServActionInterface
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServActionNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServActionSpecific
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServActionStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServActionStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServCountActNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServCountActTable is implemented
+       in read-only mode."
+
+    OBJECT       diffServCountActStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServCountActStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServAlgDropNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServAlgDropTable is implemented in
+       read-only mode."
+
+    OBJECT       diffServAlgDropType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServAlgDropNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServAlgDropQMeasure
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServAlgDropQThreshold
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServAlgDropSpecific
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServAlgDropStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServAlgDropStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServRandomDropNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServRandomDropTable is implemented
+       in read-only mode."
+
+    OBJECT       diffServRandomDropMinThreshBytes
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropMinThreshPkts
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropMaxThreshBytes
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropMaxThreshPkts
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropProbMax
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropWeight
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropSamplingRate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServRandomDropStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServQNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServQTable is implemented in
+       read-only mode."
+
+    OBJECT       diffServQNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServQMinRate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServQMaxRate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServQStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServQStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServSchedulerNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServSchedulerTable is implemented
+       in read-only mode."
+
+    OBJECT       diffServSchedulerNext
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServSchedulerMethod
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServSchedulerMinRate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServSchedulerMaxRate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServSchedulerStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServSchedulerStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServMinRateNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServMinRateTable is implemented in
+       read-only mode."
+
+    OBJECT       diffServMinRatePriority
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMinRateAbsolute
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMinRateRelative
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMinRateStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMinRateStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+
+    OBJECT       diffServMaxRateNextFree
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "Object is not needed when diffServMaxrateTable is implemented in
+       read-only mode."
+
+    OBJECT       diffServMaxRateAbsolute
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMaxRateRelative
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMaxRateThreshold
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMaxRateStorage
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       diffServMaxRateStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the only status that
+       needs to be supported."
+    ::= { diffServMIBCompliances 2 }
+
+diffServMIBDataPathGroup OBJECT-GROUP
+    OBJECTS {
+              diffServDataPathStart, diffServDataPathStorage,
+              diffServDataPathStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Data Path Group defines the MIB Objects that describe a
+       functional data path."
+    ::= { diffServMIBGroups 1 }
+
+diffServMIBClfrGroup OBJECT-GROUP
+    OBJECTS {
+              diffServClfrNextFree, diffServClfrStorage,
+              diffServClfrStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Classifier Group defines the MIB Objects that describe the
+
+       list the starts of individual classifiers."
+    ::= { diffServMIBGroups 2 }
+
+diffServMIBClfrElementGroup OBJECT-GROUP
+    OBJECTS {
+              diffServClfrElementNextFree,
+              diffServClfrElementPrecedence, diffServClfrElementNext,
+              diffServClfrElementSpecific, diffServClfrElementStorage,
+              diffServClfrElementStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Classifier Element Group defines the MIB Objects that
+       describe the classifier elements that make up a generic
+       classifier."
+    ::= { diffServMIBGroups 3 }
+
+diffServMIBMultiFieldClfrGroup OBJECT-GROUP
+    OBJECTS {
+              diffServMultiFieldClfrNextFree,
+              diffServMultiFieldClfrAddrType,
+              diffServMultiFieldClfrDstAddr,
+              diffServMultiFieldClfrDstPrefixLength,
+              diffServMultiFieldClfrFlowId,
+              diffServMultiFieldClfrSrcAddr,
+              diffServMultiFieldClfrSrcPrefixLength,
+              diffServMultiFieldClfrDscp,
+              diffServMultiFieldClfrProtocol,
+              diffServMultiFieldClfrDstL4PortMin,
+              diffServMultiFieldClfrDstL4PortMax,
+              diffServMultiFieldClfrSrcL4PortMin,
+              diffServMultiFieldClfrSrcL4PortMax,
+              diffServMultiFieldClfrStorage,
+              diffServMultiFieldClfrStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Multi-field Classifier Group defines the MIB Objects that
+       describe a classifier element for matching on various fields of
+       an IP and upper-layer protocol header."
+    ::= { diffServMIBGroups 4 }
+
+diffServMIBMeterGroup OBJECT-GROUP
+    OBJECTS {
+              diffServMeterNextFree, diffServMeterSucceedNext,
+              diffServMeterFailNext, diffServMeterSpecific,
+              diffServMeterStorage, diffServMeterStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Meter Group defines the objects used in describing a generic
+       meter element."
+    ::= { diffServMIBGroups 5 }
+
+diffServMIBTBParamGroup OBJECT-GROUP
+    OBJECTS {
+              diffServTBParamNextFree, diffServTBParamType,
+              diffServTBParamRate, diffServTBParamBurstSize,
+              diffServTBParamInterval, diffServTBParamStorage,
+              diffServTBParamStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Token-Bucket Meter Group defines the objects used in
+       describing a token bucket meter element."
+    ::= { diffServMIBGroups 6 }
+
+diffServMIBActionGroup OBJECT-GROUP
+    OBJECTS {
+              diffServActionNextFree, diffServActionNext,
+              diffServActionSpecific, diffServActionStorage,
+              diffServActionInterface, diffServActionStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Action Group defines the objects used in describing a
+       generic action element."
+    ::= { diffServMIBGroups 7 }
+
+diffServMIBDscpMarkActGroup OBJECT-GROUP
+    OBJECTS {
+              diffServDscpMarkActDscp
+    }
+    STATUS       current
+    DESCRIPTION
+       "The DSCP Mark Action Group defines the objects used in
+       describing a DSCP Marking Action element."
+    ::= { diffServMIBGroups 8 }
+
+diffServMIBCounterGroup OBJECT-GROUP
+    OBJECTS {
+              diffServCountActOctets, diffServCountActPkts,
+              diffServAlgDropOctets, diffServAlgDropPkts,
+              diffServAlgRandomDropOctets, diffServAlgRandomDropPkts,
+              diffServCountActStorage, diffServCountActStatus,
+              diffServCountActNextFree
+
+    }
+    STATUS       current
+    DESCRIPTION
+       "A collection of objects providing information specific to
+       packet-oriented network interfaces."
+    ::= { diffServMIBGroups 9 }
+
+diffServMIBAlgDropGroup OBJECT-GROUP
+    OBJECTS {
+              diffServAlgDropNextFree, diffServAlgDropType,
+              diffServAlgDropNext, diffServAlgDropQMeasure,
+              diffServAlgDropQThreshold, diffServAlgDropSpecific,
+              diffServAlgDropStorage, diffServAlgDropStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Algorithmic Drop Group contains the objects that describe
+       algorithmic dropper operation and configuration."
+    ::= { diffServMIBGroups 10 }
+
+diffServMIBRandomDropGroup OBJECT-GROUP
+    OBJECTS {
+              diffServRandomDropNextFree,
+              diffServRandomDropMinThreshBytes,
+              diffServRandomDropMinThreshPkts,
+              diffServRandomDropMaxThreshBytes,
+              diffServRandomDropMaxThreshPkts,
+              diffServRandomDropProbMax,
+              diffServRandomDropWeight,
+              diffServRandomDropSamplingRate,
+              diffServRandomDropStorage,
+              diffServRandomDropStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Random Drop Group augments the Algorithmic Drop Group for
+       random dropper operation and configuration."
+    ::= { diffServMIBGroups 11 }
+
+diffServMIBQGroup OBJECT-GROUP
+
+    OBJECTS {
+              diffServQNextFree, diffServQNext, diffServQMinRate,
+              diffServQMaxRate, diffServQStorage, diffServQStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Queue Group contains the objects that describe an
+
+       interface's queues."
+    ::= { diffServMIBGroups 12 }
+
+diffServMIBSchedulerGroup OBJECT-GROUP
+    OBJECTS {
+              diffServSchedulerNextFree, diffServSchedulerNext,
+              diffServSchedulerMethod, diffServSchedulerMinRate,
+              diffServSchedulerMaxRate, diffServSchedulerStorage,
+              diffServSchedulerStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Scheduler Group contains the objects that describe packet
+       schedulers on interfaces."
+    ::= { diffServMIBGroups 13 }
+
+diffServMIBMinRateGroup OBJECT-GROUP
+    OBJECTS {
+              diffServMinRateNextFree, diffServMinRatePriority,
+              diffServMinRateAbsolute, diffServMinRateRelative,
+              diffServMinRateStorage, diffServMinRateStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Minimum Rate Parameter Group contains the objects that
+       describe packet schedulers' minimum rate or priority guarantees."
+    ::= { diffServMIBGroups 14 }
+
+diffServMIBMaxRateGroup OBJECT-GROUP
+    OBJECTS {
+              diffServMaxRateNextFree, diffServMaxRateAbsolute,
+              diffServMaxRateRelative, diffServMaxRateThreshold,
+              diffServMaxRateStorage, diffServMaxRateStatus
+    }
+    STATUS       current
+    DESCRIPTION
+       "The Maximum Rate Parameter Group contains the objects that
+       describe packet schedulers' maximum rate guarantees."
+    ::= { diffServMIBGroups 15 }
+
+END
diff --git a/snmp_builder/mibs/DIRECTORY-SERVER-MIB.mib b/snmp_builder/mibs/DIRECTORY-SERVER-MIB.mib
new file mode 100644
index 0000000..e7c118e
--- /dev/null
+++ b/snmp_builder/mibs/DIRECTORY-SERVER-MIB.mib
@@ -0,0 +1,772 @@
+DIRECTORY-SERVER-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+   MODULE-IDENTITY,  Counter32, Gauge32, OBJECT-TYPE
+              FROM SNMPv2-SMI
+   mib-2      FROM RFC1213-MIB
+   DisplayString,    TimeStamp
+
+              FROM SNMPv2-TC
+   MODULE-COMPLIANCE, OBJECT-GROUP
+              FROM SNMPv2-CONF
+   ZeroBasedCounter32
+              FROM RMON2-MIB
+   applIndex, DistinguishedName, URLString
+
+              FROM NETWORK-SERVICES-MIB;
+
+ dsMIB MODULE-IDENTITY
+    LAST-UPDATED "9906070000Z"
+    ORGANIZATION "IETF Mail and Directory Management Working
+                  Group"
+    CONTACT-INFO
+   "                      Glenn Mansfield
+                  Postal: Cyber Solutions Inc.
+                          6-6-3, Minami Yoshinari
+                          Aoba-ku, Sendai, Japan 989-3204.
+
+                     Tel: +81-22-303-4012
+                     Fax: +81-22-303-4015
+                E-mail: glenn@cysols.com
+    Working Group E-mail: ietf-madman@innosoft.com
+            To subscribe: ietf-madman-request@innosoft.com"
+    DESCRIPTION
+            " The MIB module for monitoring Directory Services."
+
+    -- revision information
+
+    REVISION "9906070000Z"
+    DESCRIPTION
+      "This revision of this MIB is published in RFC 2605.
+
+       This revision obsoletes RFC 1567. It is incompatible with
+       the original MIB and so it has been renamed from dsaMIB
+       to dsMIB."
+
+    REVISION "9311250000Z" -- 25th November 1993
+    DESCRIPTION
+      "The original version of this MIB was published in RFC 1567."
+    ::= { mib-2 66 }
+
+ dsTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF DsTableEntry
+     MAX-ACCESS not-accessible
+     STATUS current
+     DESCRIPTION
+       " The table holding information related to the Directory
+         Servers."
+     ::= {dsMIB 1}
+
+ dsTableEntry OBJECT-TYPE
+     SYNTAX DsTableEntry
+     MAX-ACCESS not-accessible
+     STATUS current
+     DESCRIPTION
+       " Entry containing summary description for a Directory
+         Server."
+     INDEX { applIndex }
+     ::= {dsTable 1}
+
+-- General description of the Directory Server application will be
+-- available in the applTable of the NETWORK-SERVICES-MIB indexed by
+-- applIndex.
+
+ DsTableEntry ::= SEQUENCE {
+     dsServerType
+         BITS,
+     dsServerDescription
+         DisplayString,
+ -- Entry statistics/Cache performance
+     dsMasterEntries
+         Gauge32,
+     dsCopyEntries
+         Gauge32,
+     dsCacheEntries
+         Gauge32,
+     dsCacheHits
+         Counter32,
+     dsSlaveHits
+         Counter32
+ }
+
+ dsServerType OBJECT-TYPE
+     SYNTAX BITS {
+                  frontEndDirectoryServer(0),
+                  backEndDirectoryServer(1)
+            }
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       "This object indicates whether the server is
+        a frontend or, a backend or, both. If the server
+        is a frontend, then the frontEndDirectoryServer
+
+        bit will be set. Similarly for the backend."
+     ::= {dsTableEntry 1}
+
+ dsServerDescription OBJECT-TYPE
+    SYNTAX DisplayString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "A text description of the application.  This information
+       is intended to identify and briefly describe the
+       application in a status display."
+     ::= {dsTableEntry 2}
+
+-- A (C)LDAP frontend to the X.500 Directory will not have
+-- MasterEntries, CopyEntries; the following counters will
+-- be inaccessible for LDAP/CLDAP frontends to the X.500
+-- directory: dsMasterEntries, dsCopyEntries, dsSlaveHits.
+
+ dsMasterEntries OBJECT-TYPE
+     SYNTAX Gauge32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of entries mastered in the Directory Server."
+     ::= {dsTableEntry 3}
+
+ dsCopyEntries OBJECT-TYPE
+     SYNTAX Gauge32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of entries for which systematic (slave)
+         copies are maintained in the Directory Server."
+     ::= {dsTableEntry 4}
+
+ dsCacheEntries OBJECT-TYPE
+     SYNTAX Gauge32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of entries cached (non-systematic copies) in
+         the Directory Server. This will include the entries that
+         are cached partially. The negative cache is not counted."
+     ::= {dsTableEntry 5}
+
+ dsCacheHits OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of operations that were serviced from
+         the locally held cache."
+     ::= {dsTableEntry 6}
+
+ dsSlaveHits  OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of operations that were serviced from
+         the locally held object replications ( copy-
+         entries)."
+     ::= {dsTableEntry 7}
+
+ dsApplIfOpsTable OBJECT-TYPE
+     SYNTAX SEQUENCE OF DsApplIfOpsEntry
+     MAX-ACCESS not-accessible
+     STATUS current
+     DESCRIPTION
+       " The table holding information related to the
+         Directory Server operations."
+     ::= {dsMIB 2}
+
+ dsApplIfOpsEntry OBJECT-TYPE
+     SYNTAX DsApplIfOpsEntry
+     MAX-ACCESS not-accessible
+     STATUS current
+     DESCRIPTION
+       " Entry containing operations related statistics
+         for a Directory Server."
+     INDEX { applIndex, dsApplIfProtocolIndex }
+     ::= {dsApplIfOpsTable 1}
+ DsApplIfOpsEntry ::= SEQUENCE {
+
+     dsApplIfProtocolIndex
+          INTEGER,
+     dsApplIfProtocol
+          OBJECT IDENTIFIER,
+ -- Bindings
+
+     dsApplIfUnauthBinds
+         Counter32,
+     dsApplIfSimpleAuthBinds
+         Counter32,
+     dsApplIfStrongAuthBinds
+         Counter32,
+     dsApplIfBindSecurityErrors
+         Counter32,
+ -- In-coming operations
+
+     dsApplIfInOps
+         Counter32,
+     dsApplIfReadOps
+         Counter32,
+     dsApplIfCompareOps
+         Counter32,
+     dsApplIfAddEntryOps
+         Counter32,
+     dsApplIfRemoveEntryOps
+         Counter32,
+     dsApplIfModifyEntryOps
+         Counter32,
+     dsApplIfModifyRDNOps
+         Counter32,
+     dsApplIfListOps
+         Counter32,
+     dsApplIfSearchOps
+         Counter32,
+     dsApplIfOneLevelSearchOps
+         Counter32,
+     dsApplIfWholeSubtreeSearchOps
+         Counter32,
+ -- Out going operations
+
+     dsApplIfReferrals
+         Counter32,
+     dsApplIfChainings
+         Counter32,
+ -- Errors
+
+     dsApplIfSecurityErrors
+         Counter32,
+     dsApplIfErrors
+         Counter32,
+--  replications
+
+     dsApplIfReplicationUpdatesIn
+         Counter32,
+     dsApplIfReplicationUpdatesOut
+         Counter32,
+ -- Traffic Volume
+
+     dsApplIfInBytes
+         Counter32,
+     dsApplIfOutBytes
+         Counter32
+ }
+
+ -- CLDAP does not use binds; for the CLDAP interface of a Directory
+ -- Server the bind related counters will be inaccessible.
+ --
+ -- CLDAP and LDAP implement "Read" and "List" operations
+ -- indirectly via the "search" operation; the following
+ -- counters will be inaccessible for the CLDAP and LDAP interfaces of
+ -- Directory Servers:  dsApplIfReadOps, dsApplIfListOps
+ --
+ -- CLDAP does not implement "Compare", "Add", "Remove",
+ -- "Modify", "ModifyRDN"; the following counters will be
+ -- inaccessible for the CLDAP interfaces of Directory Servers:
+ -- dsApplIfCompareOps, dsApplIfAddEntryOps,  dsApplIfRemoveEntryOps,
+ -- dsApplIfModifyEntryOps, dsApplIfModifyRDNOps.
+ --
+ -- CLDAP Directory Servers do not return Referrals
+ -- the following fields will remain inaccessible for
+ -- CLDAP interfaces of Directory Servers: dsApplIfReferrals.
+
+ dsApplIfProtocolIndex OBJECT-TYPE
+     SYNTAX INTEGER (1..2147483647)
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+      "An index to uniquely identify an entry corresponding to a
+       application-layer protocol interface. This index is used
+       for lexicographic ordering of the table."
+     ::= {dsApplIfOpsEntry 1}
+
+ dsApplIfProtocol OBJECT-TYPE
+     SYNTAX OBJECT IDENTIFIER
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+      "An identification of the protocol being used by the application
+       on this interface.  For an OSI Application, this will be the
+       Application Context.  For Internet applications, the IANA
+       maintains a registry[22] of the OIDs which correspond to
+
+       well-known applications.  If the application protocol is
+       not listed in the registry, an OID value of the form
+       {applTCPProtoID port} or {applUDProtoID port} are used for
+       TCP-based and UDP-based protocols, respectively. In either
+       case 'port' corresponds to the primary port number being
+       used by the protocol. The OIDs applTCPProtoID and
+       applUDPProtoID are defined in NETWORK-SERVICES-MIB"
+     ::= {dsApplIfOpsEntry 2}
+
+ dsApplIfUnauthBinds OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of unauthenticated/anonymous bind requests
+         received."
+     ::= {dsApplIfOpsEntry 3}
+
+ dsApplIfSimpleAuthBinds OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of bind requests that were authenticated
+         using simple authentication procedures like password
+         checks. This includes the
+         password authentication using SASL mechanisms like
+         CRAM-MD5."
+     ::= {dsApplIfOpsEntry 4}
+
+ dsApplIfStrongAuthBinds OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of bind requests that were authenticated
+         using TLS and X.500 strong authentication procedures.
+         This includes the binds that were
+         authenticated using external authentication procedures."
+     ::= {dsApplIfOpsEntry 5}
+
+ dsApplIfBindSecurityErrors OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of bind requests that have been rejected
+         due to inappropriate authentication or
+
+         invalid credentials."
+     ::= {dsApplIfOpsEntry 6}
+
+ dsApplIfInOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of requests received from DUAs or other
+         Directory Servers."
+     ::= {dsApplIfOpsEntry 7}
+
+ dsApplIfReadOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of read requests  received."
+     ::= {dsApplIfOpsEntry 8}
+
+ dsApplIfCompareOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of compare requests received."
+     ::= {dsApplIfOpsEntry 9}
+
+ dsApplIfAddEntryOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of addEntry requests received."
+     ::= {dsApplIfOpsEntry 10}
+
+ dsApplIfRemoveEntryOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of removeEntry requests received."
+     ::= {dsApplIfOpsEntry 11}
+
+ dsApplIfModifyEntryOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of modifyEntry requests received."
+     ::= {dsApplIfOpsEntry 12}
+
+ dsApplIfModifyRDNOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of modifyRDN requests received."
+     ::= {dsApplIfOpsEntry 13}
+
+ dsApplIfListOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of list requests received."
+     ::= {dsApplIfOpsEntry 14}
+
+ dsApplIfSearchOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of search requests- baseObject searches,
+         oneLevel searches and  whole subtree searches,
+         received."
+     ::= {dsApplIfOpsEntry 15}
+
+ dsApplIfOneLevelSearchOps OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of oneLevel search requests received."
+     ::= {dsApplIfOpsEntry 16}
+
+ dsApplIfWholeSubtreeSearchOps   OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of whole subtree search requests received."
+     ::= {dsApplIfOpsEntry 17}
+
+ dsApplIfReferrals OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of referrals returned in response
+         to requests for operations."
+     ::= {dsApplIfOpsEntry 18}
+
+ dsApplIfChainings OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of operations forwarded by this Directory Server
+         to other Directory Servers."
+     ::= {dsApplIfOpsEntry 19}
+
+ dsApplIfSecurityErrors OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of requests received
+         which did not meet the security requirements. "
+     ::= {dsApplIfOpsEntry 20}
+
+ dsApplIfErrors  OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of requests that could not be serviced
+         due to errors other than security errors, and
+         referrals.
+         A partially serviced operation will not be counted
+         as an error.
+         The errors include naming-related, update-related,
+         attribute-related and service-related errors."
+     ::= {dsApplIfOpsEntry 21}
+
+-- Replication operations
+
+ dsApplIfReplicationUpdatesIn OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of replication updates fetched or received from
+         supplier Directory Servers."
+     ::= {dsApplIfOpsEntry 22}
+
+ dsApplIfReplicationUpdatesOut OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Number of replication updates sent to or taken by
+         consumer Directory Servers."
+     ::= {dsApplIfOpsEntry 23}
+
+ dsApplIfInBytes  OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Incoming traffic, in bytes, on the interface.
+         This will include requests from DUAs as well
+         as responses from other Directory Servers."
+     ::= {dsApplIfOpsEntry 24}
+
+ dsApplIfOutBytes OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Outgoing traffic in bytes on the interface.
+         This will include responses to DUAs and Directory
+         Servers as well as requests to other Directory Servers."
+     ::= {dsApplIfOpsEntry 25}
+
+ -- The dsIntTable contains statistical data on the peer
+ -- Directory Servers  with which the monitored Directory
+ -- Server interacts or, attempts to interact. This  table is
+ -- expected to provide a useful insight into the effect of
+ -- neighbours on the Directory Server's performance.
+ -- The table keeps track of the last "N" Directory Servers
+ -- with which  the  monitored   Directory  has  interacted
+ -- (attempted to interact), where "N" is a locally-defined
+ -- constant.
+ -- For a multiprotocol server, statistics for each protocol
+
+ -- are kept separetely.
+
+ dsIntTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF DsIntEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+       " Each row of this table contains some details
+         related to the history of the interaction
+         of the monitored Directory Server with its
+         peer Directory Servers."
+     ::= { dsMIB 3 }
+
+ dsIntEntry OBJECT-TYPE
+     SYNTAX  DsIntEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+       " Entry containing interaction details of a Directory
+         Server with a peer Directory Server."
+     INDEX { applIndex,dsIntEntIndex, dsApplIfProtocolIndex }
+     ::= { dsIntTable 1 }
+
+ DsIntEntry ::= SEQUENCE {
+    dsIntEntIndex
+              INTEGER,
+    dsIntEntDirectoryName
+              DistinguishedName,
+    dsIntEntTimeOfCreation
+              TimeStamp,
+    dsIntEntTimeOfLastAttempt
+              TimeStamp,
+    dsIntEntTimeOfLastSuccess
+              TimeStamp,
+    dsIntEntFailuresSinceLastSuccess
+              Gauge32,
+    dsIntEntFailures
+              ZeroBasedCounter32,
+    dsIntEntSuccesses
+              ZeroBasedCounter32,
+    dsIntEntURL
+              URLString
+ }
+
+ dsIntEntIndex  OBJECT-TYPE
+     SYNTAX INTEGER (1..2147483647)
+     MAX-ACCESS not-accessible
+     STATUS current
+     DESCRIPTION
+       " Together with applIndex and dsApplIfProtocolIndex, this
+         object forms the unique key to
+         identify the conceptual row which contains useful info
+         on the (attempted) interaction between the Directory
+         Server (referred to by applIndex) and a peer Directory
+         Server using a particular protocol."
+     ::= {dsIntEntry 1}
+
+ dsIntEntDirectoryName  OBJECT-TYPE
+     SYNTAX DistinguishedName
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Distinguished Name of the peer Directory Server to
+         which this entry pertains."
+     ::= {dsIntEntry 2}
+
+ dsIntEntTimeOfCreation  OBJECT-TYPE
+     SYNTAX TimeStamp
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " The value of sysUpTime when this row was created.
+         If the entry was created before the network management
+         subsystem was initialized, this object will contain
+         a value of zero."
+     ::= {dsIntEntry 3}
+
+ dsIntEntTimeOfLastAttempt  OBJECT-TYPE
+     SYNTAX TimeStamp
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " The value of sysUpTime when the last attempt was made
+         to contact the peer Directory Server. If the last attempt
+         was made before the network management subsystem was
+         initialized, this object will contain a value of zero."
+     ::= {dsIntEntry 4}
+
+ dsIntEntTimeOfLastSuccess  OBJECT-TYPE
+     SYNTAX TimeStamp
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " The value of sysUpTime when the last attempt made to
+         contact the peer Directory Server was successful. If there
+         have been no successful attempts this entry will have a value
+
+         of zero. If the last successful attempt was made before
+         the network management subsystem was initialized, this
+         object will contain a value of zero."
+     ::= {dsIntEntry 5}
+
+ dsIntEntFailuresSinceLastSuccess  OBJECT-TYPE
+     SYNTAX Gauge32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " The number of failures since the last time an
+         attempt to contact the peer Directory Server was successful.
+         If there have been no successful attempts, this counter
+         will contain the number of failures since this entry
+         was created."
+     ::= {dsIntEntry 6}
+
+-- note this gauge has a maximum value of 4294967295 and,
+-- it does not wrap.[5]
+
+ dsIntEntFailures  OBJECT-TYPE
+     SYNTAX ZeroBasedCounter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Cumulative failures in contacting the peer Directory Server
+         since the creation of this entry."
+     ::= {dsIntEntry 7}
+
+ dsIntEntSuccesses  OBJECT-TYPE
+     SYNTAX ZeroBasedCounter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " Cumulative successes in contacting the peer Directory Server
+         since the creation of this entry."
+     ::= {dsIntEntry 8}
+
+ dsIntEntURL  OBJECT-TYPE
+     SYNTAX URLString
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+       " URL of the peer Directory Server."
+     ::= {dsIntEntry 9}
+
+ -- Conformance information
+
+ dsConformance OBJECT IDENTIFIER ::= { dsMIB 4 }
+
+ dsGroups      OBJECT IDENTIFIER ::= { dsConformance 1 }
+ dsCompliances OBJECT IDENTIFIER ::= { dsConformance 2 }
+
+ -- Compliance statements
+
+ dsEntryCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+             "The compliance statement for SNMP entities
+             which implement the DIRECTORY-SERVER-MIB for
+             a summary overview of the Directory Servers ."
+
+     MODULE  -- this module
+         MANDATORY-GROUPS { dsEntryGroup }
+     ::= { dsCompliances 1 }
+
+ dsOpsCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+             "The compliance statement for SNMP entities
+             which implement the DIRECTORY-SERVER-MIB for monitoring
+             Directory Server operations,  entry statistics and cache
+             performance."
+
+     MODULE  -- this module
+         MANDATORY-GROUPS { dsEntryGroup, dsOpsGroup }
+     ::= { dsCompliances 2 }
+
+ dsIntCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                " The compliance statement  for SNMP  entities
+                  which implement the DIRECTORY-SERVER-MIB for
+                  monitoring Directory Server operations and the
+                  interaction of the Directory Server with peer
+                  Directory Servers."
+
+        MODULE  -- this module
+        MANDATORY-GROUPS { dsEntryGroup, dsIntGroup }
+        ::= { dsCompliances 3 }
+
+ dsOpsIntCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+             " The compliance statement  for SNMP  entities
+               which implement the DIRECTORY-SERVER-MIB for monitoring
+               Directory Server operations and the interaction of the
+               Directory Server with peer Directory Servers."
+
+     MODULE  -- this module
+     MANDATORY-GROUPS { dsEntryGroup, dsOpsGroup, dsIntGroup }
+     ::= { dsCompliances 4 }
+
+ -- Units of conformance
+
+ dsEntryGroup    OBJECT-GROUP
+     OBJECTS {dsServerType,            dsServerDescription,
+              dsMasterEntries,         dsCopyEntries,
+              dsCacheEntries,          dsCacheHits,
+              dsSlaveHits}
+     STATUS  current
+     DESCRIPTION
+             " A collection of objects for a summary overview of the
+               Directory Servers."
+     ::= { dsGroups 1 }
+
+ dsOpsGroup    OBJECT-GROUP
+     OBJECTS {
+       dsApplIfProtocolIndex,          dsApplIfProtocol,
+       dsApplIfUnauthBinds,            dsApplIfSimpleAuthBinds,
+       dsApplIfStrongAuthBinds,        dsApplIfBindSecurityErrors,
+       dsApplIfInOps,                  dsApplIfReadOps,
+       dsApplIfCompareOps,             dsApplIfAddEntryOps,
+       dsApplIfRemoveEntryOps,         dsApplIfModifyEntryOps,
+       dsApplIfModifyRDNOps,           dsApplIfListOps,
+       dsApplIfSearchOps,              dsApplIfOneLevelSearchOps,
+       dsApplIfWholeSubtreeSearchOps,  dsApplIfReferrals,
+       dsApplIfChainings,              dsApplIfSecurityErrors,
+       dsApplIfErrors,                 dsApplIfReplicationUpdatesIn,
+       dsApplIfReplicationUpdatesOut,  dsApplIfInBytes,
+       dsApplIfOutBytes      }
+     STATUS  current
+     DESCRIPTION
+             " A collection of objects for monitoring the Directory
+               Server operations."
+     ::= { dsGroups 2 }
+
+ dsIntGroup    OBJECT-GROUP
+     OBJECTS {
+
+       dsIntEntDirectoryName,         dsIntEntTimeOfCreation,
+       dsIntEntTimeOfLastAttempt,     dsIntEntTimeOfLastSuccess,
+       dsIntEntFailuresSinceLastSuccess, dsIntEntFailures,
+       dsIntEntSuccesses,             dsIntEntURL}
+     STATUS  current
+     DESCRIPTION
+             " A collection of objects for monitoring the Directory
+               Server's interaction with peer Directory Servers."
+     ::= { dsGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-EVENT-MIB.mib b/snmp_builder/mibs/DISMAN-EVENT-MIB.mib
new file mode 100644
index 0000000..f00c7cc
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-EVENT-MIB.mib
@@ -0,0 +1,1882 @@
+DISMAN-EVENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, Unsigned32,
+    NOTIFICATION-TYPE, Counter32,
+    Gauge32, mib-2, zeroDotZero         FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus,
+    TruthValue                FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP             FROM SNMPv2-CONF
+    sysUpTime                 FROM SNMPv2-MIB
+    SnmpTagValue              FROM SNMP-TARGET-MIB
+    SnmpAdminString           FROM SNMP-FRAMEWORK-MIB;
+
+dismanEventMIB MODULE-IDENTITY
+    LAST-UPDATED "200010160000Z"            -- 16 October 2000
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO "Ramanathan Kavasseri
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive,
+                  San Jose CA 95134-1706.
+                  Phone: +1 408 526 4527
+                  Email: ramk@cisco.com"
+    DESCRIPTION
+     "The MIB module for defining event triggers and actions
+     for network management purposes."
+-- Revision History
+
+       REVISION     "200010160000Z"            -- 16 October 2000
+       DESCRIPTION  "This is the initial version of this MIB.
+                    Published as RFC 2981"
+    ::= { mib-2 88 }
+
+dismanEventMIBObjects OBJECT IDENTIFIER ::= { dismanEventMIB 1 }
+
+-- Management Triggered Event (MTE) objects
+
+mteResource           OBJECT IDENTIFIER ::= { dismanEventMIBObjects 1 }
+mteTrigger            OBJECT IDENTIFIER ::= { dismanEventMIBObjects 2 }
+mteObjects            OBJECT IDENTIFIER ::= { dismanEventMIBObjects 3 }
+mteEvent              OBJECT IDENTIFIER ::= { dismanEventMIBObjects 4 }
+
+--
+-- Textual Conventions
+--
+
+FailureReason ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Reasons for failures in an attempt to perform a management
+        request.
+
+        The first group of errors, numbered less than 0, are related
+        to problems in sending the request.  The existence of a
+        particular error code here does not imply that all
+        implementations are capable of sensing that error and
+
+        returning that code.
+
+        The second group, numbered greater than 0, are copied
+        directly from SNMP protocol operations and are intended to
+        carry exactly the meanings defined for the protocol as returned
+        in an SNMP response.
+
+        localResourceLack       some local resource such as memory
+                                lacking or
+                                mteResourceSampleInstanceMaximum
+                                exceeded
+        badDestination          unrecognized domain name or otherwise
+                                invalid destination address
+        destinationUnreachable  can't get to destination address
+        noResponse              no response to SNMP request
+        badType                 the data syntax of a retrieved object
+                                as not as expected
+        sampleOverrun           another sample attempt occurred before
+                                the previous one completed"
+    SYNTAX      INTEGER { localResourceLack(-1),
+                          badDestination(-2),
+                          destinationUnreachable(-3),
+                          noResponse(-4),
+                          badType(-5),
+                          sampleOverrun(-6),
+                          noError(0),
+                          tooBig(1),
+                          noSuchName(2),
+                          badValue(3),
+                          readOnly(4),
+                          genErr(5),
+                          noAccess(6),
+                          wrongType(7),
+                          wrongLength(8),
+                          wrongEncoding(9),
+                          wrongValue(10),
+                          noCreation(11),
+                          inconsistentValue(12),
+                          resourceUnavailable(13),
+                          commitFailed(14),
+                          undoFailed(15),
+                          authorizationError(16),
+                          notWritable(17),
+                          inconsistentName(18) }
+--
+
+-- Resource Control Section
+--
+
+mteResourceSampleMinimum OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The minimum mteTriggerFrequency this system will
+        accept.  A system may use the larger values of this minimum to
+        lessen the impact of constant sampling.  For larger
+        sampling intervals the system samples less often and
+        suffers less overhead.  This object provides a way to enforce
+        such lower overhead for all triggers created after it is
+        set.
+
+        Unless explicitly resource limited, a system's value for
+        this object SHOULD be 1, allowing as small as a 1 second
+        interval for ongoing trigger sampling.
+
+        Changing this value will not invalidate an existing setting
+        of mteTriggerFrequency."
+    ::= { mteResource 1 }
+
+mteResourceSampleInstanceMaximum OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "instances"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of instance entries this system will
+        support for sampling.
+
+        These are the entries that maintain state, one for each
+        instance of each sampled object as selected by
+        mteTriggerValueID.  Note that wildcarded objects result
+        in multiple instances of this state.
+
+        A value of 0 indicates no preset limit, that is, the limit
+        is dynamic based on system operation and resources.
+
+        Unless explicitly resource limited, a system's value for
+        this object SHOULD be 0.
+
+        Changing this value will not eliminate or inhibit existing
+        sample state but could prevent allocation of additional state
+        information."
+    ::= { mteResource 2 }
+
+mteResourceSampleInstances OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "instances"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of currently active instance entries as
+        defined for mteResourceSampleInstanceMaximum."
+    ::= { mteResource 3 }
+
+mteResourceSampleInstancesHigh OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "instances"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The highest value of mteResourceSampleInstances that has
+        occurred since initialization of the management system."
+    ::= { mteResource 4 }
+
+mteResourceSampleInstanceLacks OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "instances"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times this system could not take a new sample
+        because that allocation would have exceeded the limit set by
+        mteResourceSampleInstanceMaximum."
+    ::= { mteResource 5 }
+
+--
+-- Trigger Section
+--
+
+-- Counters
+
+mteTriggerFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "failures"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times an attempt to check for a trigger
+        condition has failed.  This counts individually for each
+        attempt in a group of targets or each attempt for a
+
+        wildcarded object."
+    ::= { mteTrigger 1 }
+
+--
+-- Trigger Table
+--
+
+mteTriggerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteTriggerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event trigger information."
+    ::= { mteTrigger 2 }
+
+mteTriggerEntry OBJECT-TYPE
+    SYNTAX      MteTriggerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single trigger.  Applications create and
+        delete entries using mteTriggerEntryStatus."
+    INDEX       { mteOwner, IMPLIED mteTriggerName }
+    ::= { mteTriggerTable 1 }
+
+MteTriggerEntry ::= SEQUENCE {
+    mteOwner                            SnmpAdminString,
+    mteTriggerName                      SnmpAdminString,
+    mteTriggerComment                   SnmpAdminString,
+    mteTriggerTest                      BITS,
+    mteTriggerSampleType                INTEGER,
+    mteTriggerValueID                   OBJECT IDENTIFIER,
+    mteTriggerValueIDWildcard           TruthValue,
+    mteTriggerTargetTag                 SnmpTagValue,
+    mteTriggerContextName               SnmpAdminString,
+    mteTriggerContextNameWildcard       TruthValue,
+    mteTriggerFrequency                 Unsigned32,
+    mteTriggerObjectsOwner              SnmpAdminString,
+    mteTriggerObjects                   SnmpAdminString,
+    mteTriggerEnabled                   TruthValue,
+    mteTriggerEntryStatus               RowStatus
+}
+
+mteOwner OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+        "The owner of this entry. The exact semantics of this
+        string are subject to the security policy defined by the
+        security administrator."
+    ::= { mteTriggerEntry 1 }
+
+mteTriggerName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A locally-unique, administratively assigned name for the
+        trigger within the scope of mteOwner."
+    ::= { mteTriggerEntry 2 }
+
+mteTriggerComment OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A description of the trigger's function and use."
+    DEFVAL { ''H }
+    ::= { mteTriggerEntry 3 }
+
+mteTriggerTest OBJECT-TYPE
+    SYNTAX      BITS { existence(0), boolean(1), threshold(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of trigger test to perform.  For 'boolean' and
+        'threshold'  tests, the object at mteTriggerValueID MUST
+        evaluate to an integer, that is, anything that ends up encoded
+        for transmission (that is, in BER, not ASN.1) as an integer.
+
+        For 'existence', the specific test is as selected by
+        mteTriggerExistenceTest.  When an object appears, vanishes
+        or changes value, the trigger fires. If the object's
+        appearance caused the trigger firing, the object MUST
+        vanish before the trigger can be fired again for it, and
+        vice versa. If the trigger fired due to a change in the
+        object's value, it will be fired again on every successive
+        value change for that object.
+
+        For 'boolean', the specific test is as selected by
+        mteTriggerBooleanTest.  If the test result is true the trigger
+        fires.  The trigger will not fire again until the value has
+        become false and come back to true.
+
+        For 'threshold' the test works as described below for
+
+        mteTriggerThresholdStartup, mteTriggerThresholdRising, and
+        mteTriggerThresholdFalling.
+
+        Note that combining 'boolean' and 'threshold' tests on the
+        same object may be somewhat redundant."
+    DEFVAL { { boolean } }
+    ::= { mteTriggerEntry 4 }
+
+mteTriggerSampleType OBJECT-TYPE
+    SYNTAX      INTEGER { absoluteValue(1), deltaValue(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of sampling to perform.
+
+        An 'absoluteValue' sample requires only a single sample to be
+        meaningful, and is exactly the value of the object at
+        mteTriggerValueID at the sample time.
+
+        A 'deltaValue' requires two samples to be meaningful and is
+        thus not available for testing until the second and subsequent
+        samples after the object at mteTriggerValueID is first found
+        to exist.  It is the difference between the two samples.  For
+        unsigned values it is always positive, based on unsigned
+        arithmetic.  For signed values it can be positive or negative.
+
+        For SNMP counters to be meaningful they should be sampled as a
+        'deltaValue'.
+
+        For 'deltaValue' mteTriggerDeltaTable contains further
+        parameters.
+
+        If only 'existence' is set in mteTriggerTest this object has
+        no meaning."
+    DEFVAL { absoluteValue }
+    ::= { mteTriggerEntry 5 }
+
+mteTriggerValueID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The object identifier of the MIB object to sample to see
+        if the trigger should fire.
+
+        This may be wildcarded by truncating all or part of the
+        instance portion, in which case the value is obtained
+        as if with a GetNext function, checking multiple values
+
+        if they exist.  If such wildcarding is applied,
+        mteTriggerValueIDWildcard must be 'true' and if not it must
+        be 'false'.
+
+        Bad object identifiers or a mismatch between truncating the
+        identifier and the value of mteTriggerValueIDWildcard result
+        in operation as one would expect when providing the wrong
+        identifier to a Get or GetNext operation.  The Get will fail
+        or get the wrong object.  The GetNext will indeed get whatever
+        is next, proceeding until it runs past the initial part of the
+        identifier and perhaps many unintended objects for confusing
+        results.  If the value syntax of those objects is not usable,
+        that results in a 'badType' error that terminates the scan.
+
+        Each instance that fills the wildcard is independent of any
+        additional instances, that is, wildcarded objects operate
+        as if there were a separate table entry for each instance
+        that fills the wildcard without having to actually predict
+        all possible instances ahead of time."
+    DEFVAL { zeroDotZero }
+    ::= { mteTriggerEntry 6 }
+
+mteTriggerValueIDWildcard OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Control for whether mteTriggerValueID is to be treated as
+        fully-specified or wildcarded, with 'true' indicating wildcard."
+    DEFVAL { false }
+    ::= { mteTriggerEntry 7 }
+
+mteTriggerTargetTag OBJECT-TYPE
+    SYNTAX      SnmpTagValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The tag for the target(s) from which to obtain the condition
+        for a trigger check.
+
+        A length of 0 indicates the local system.  In this case,
+        access to the objects indicated by mteTriggerValueID is under
+        the security credentials of the requester that set
+        mteTriggerEntryStatus to 'active'.  Those credentials are the
+        input parameters for isAccessAllowed from the Architecture for
+        Describing SNMP Management Frameworks.
+
+        Otherwise access rights are checked according to the security
+
+        parameters resulting from the tag."
+    DEFVAL { ''H }
+    ::= { mteTriggerEntry 8 }
+
+mteTriggerContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The management context from which to obtain mteTriggerValueID.
+
+        This may be wildcarded by leaving characters off the end.  For
+        example use 'Repeater' to wildcard to 'Repeater1',
+        'Repeater2', 'Repeater-999.87b', and so on.  To indicate such
+        wildcarding is intended, mteTriggerContextNameWildcard must
+        be 'true'.
+
+        Each instance that fills the wildcard is independent of any
+        additional instances, that is, wildcarded objects operate
+        as if there were a separate table entry for each instance
+        that fills the wildcard without having to actually predict
+        all possible instances ahead of time.
+
+        Operation of this feature assumes that the local system has a
+        list of available contexts against which to apply the
+        wildcard.  If the objects are being read from the local
+        system, this is clearly the system's own list of contexts.
+        For a remote system a local version of such a list is not
+        defined by any current standard and may not be available, so
+        this function MAY not be supported."
+    DEFVAL { ''H }
+    ::= { mteTriggerEntry 9 }
+
+mteTriggerContextNameWildcard OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Control for whether mteTriggerContextName is to be treated as
+        fully-specified or wildcarded, with 'true' indicating wildcard."
+    DEFVAL { false }
+    ::= { mteTriggerEntry 10 }
+
+mteTriggerFrequency OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of seconds to wait between trigger samples.  To
+        encourage consistency in sampling, the interval is measured
+        from the beginning of one check to the beginning of the next
+        and the timer is restarted immediately when it expires, not
+        when the check completes.
+
+        If the next sample begins before the previous one completed the
+        system may either attempt to make the check or treat this as an
+        error condition with the error 'sampleOverrun'.
+
+        A frequency of 0 indicates instantaneous recognition of the
+        condition.  This is not possible in many cases, but may
+        be supported in cases where it makes sense and the system is
+        able to do so.  This feature allows the MIB to be used in
+        implementations where such interrupt-driven behavior is
+        possible and is not likely to be supported for all MIB objects
+        even then since such sampling generally has to be tightly
+        integrated into low-level code.
+
+        Systems that can support this SHOULD document those cases
+        where it can be used.  In cases where it can not, setting this
+        object to 0 should be disallowed."
+    DEFVAL { 600 }
+    ::= { mteTriggerEntry 11 }
+
+mteTriggerObjectsOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerObjects, the mteOwner of a group of
+        objects from mteObjectsTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerEntry 12 }
+
+mteTriggerObjects OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The mteObjectsName of a group of objects from
+        mteObjectsTable.  These objects are to be added to any
+        Notification resulting from the firing of this trigger.
+
+        A list of objects may also be added based on the event or on
+        the value of mteTriggerTest.
+
+        A length of 0 indicates no additional objects."
+    DEFVAL { ''H }
+    ::= { mteTriggerEntry 13 }
+
+mteTriggerEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A control to allow a trigger to be configured but not used.
+        When the value is 'false' the trigger is not sampled."
+    DEFVAL { false }
+    ::= { mteTriggerEntry 14 }
+
+mteTriggerEntryStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The control that allows creation and deletion of entries.
+        Once made active an entry may not be modified except to
+        delete it."
+    ::= { mteTriggerEntry 15 }
+
+--
+-- Trigger Delta Table
+--
+
+mteTriggerDeltaTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteTriggerDeltaEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event trigger information for delta
+        sampling."
+    ::= { mteTrigger 3 }
+
+mteTriggerDeltaEntry OBJECT-TYPE
+    SYNTAX      MteTriggerDeltaEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single trigger's delta sampling.  Entries
+        automatically exist in this this table for each mteTriggerEntry
+        that has mteTriggerSampleType set to 'deltaValue'."
+    INDEX       { mteOwner, IMPLIED mteTriggerName }
+    ::= { mteTriggerDeltaTable 1 }
+
+MteTriggerDeltaEntry ::= SEQUENCE {
+    mteTriggerDeltaDiscontinuityID                OBJECT IDENTIFIER,
+    mteTriggerDeltaDiscontinuityIDWildcard        TruthValue,
+    mteTriggerDeltaDiscontinuityIDType            INTEGER
+}
+
+sysUpTimeInstance OBJECT IDENTIFIER ::= { sysUpTime 0 }
+
+mteTriggerDeltaDiscontinuityID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The OBJECT IDENTIFIER (OID) of a TimeTicks, TimeStamp, or
+        DateAndTime object that indicates a discontinuity in the value
+        at mteTriggerValueID.
+
+        The OID may be for a leaf object (e.g. sysUpTime.0) or may
+        be wildcarded to match mteTriggerValueID.
+
+        This object supports normal checking for a discontinuity in a
+        counter.  Note that if this object does not point to sysUpTime
+        discontinuity checking MUST still check sysUpTime for an overall
+        discontinuity.
+
+        If the object identified is not accessible the sample attempt
+        is in error, with the error code as from an SNMP request.
+
+        Bad object identifiers or a mismatch between truncating the
+        identifier and the value of mteDeltaDiscontinuityIDWildcard
+        result in operation as one would expect when providing the
+        wrong identifier to a Get operation.  The Get will fail or get
+        the wrong object.  If the value syntax of those objects is not
+        usable, that results in an error that terminates the sample
+        with a 'badType' error code."
+    DEFVAL { sysUpTimeInstance }
+    ::= { mteTriggerDeltaEntry 1 }
+
+mteTriggerDeltaDiscontinuityIDWildcard OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+        "Control for whether mteTriggerDeltaDiscontinuityID is to be
+        treated as fully-specified or wildcarded, with 'true'
+        indicating wildcard. Note that the value of this object will
+        be the same as that of the corresponding instance of
+        mteTriggerValueIDWildcard when the corresponding
+
+        mteTriggerSampleType is 'deltaValue'."
+    DEFVAL { false }
+    ::= { mteTriggerDeltaEntry 2 }
+
+mteTriggerDeltaDiscontinuityIDType OBJECT-TYPE
+    SYNTAX      INTEGER { timeTicks(1), timeStamp(2), dateAndTime(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value 'timeTicks' indicates the
+        mteTriggerDeltaDiscontinuityID of this row is of syntax
+        TimeTicks.  The value 'timeStamp' indicates syntax TimeStamp.
+        The value 'dateAndTime' indicates syntax DateAndTime."
+    DEFVAL { timeTicks }
+    ::= { mteTriggerDeltaEntry 3 }
+
+--
+-- Trigger Existence Table
+--
+
+mteTriggerExistenceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteTriggerExistenceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event trigger information for existence
+        triggers."
+    ::= { mteTrigger 4 }
+
+mteTriggerExistenceEntry OBJECT-TYPE
+    SYNTAX      MteTriggerExistenceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single existence trigger.  Entries
+        automatically exist in this this table for each mteTriggerEntry
+        that has 'existence' set in mteTriggerTest."
+    INDEX       { mteOwner, IMPLIED mteTriggerName }
+    ::= { mteTriggerExistenceTable 1 }
+
+MteTriggerExistenceEntry ::= SEQUENCE {
+    mteTriggerExistenceTest              BITS,
+    mteTriggerExistenceStartup           BITS,
+    mteTriggerExistenceObjectsOwner      SnmpAdminString,
+    mteTriggerExistenceObjects           SnmpAdminString,
+    mteTriggerExistenceEventOwner        SnmpAdminString,
+    mteTriggerExistenceEvent             SnmpAdminString
+}
+
+mteTriggerExistenceTest OBJECT-TYPE
+    SYNTAX      BITS { present(0), absent(1), changed(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of existence test to perform.  The trigger fires
+        when the object at mteTriggerValueID is seen to go from
+        present to absent, from absent to present, or to have it's
+        value changed, depending on which tests are selected:
+
+        present(0) - when this test is selected, the trigger fires
+        when the mteTriggerValueID object goes from absent to present.
+
+        absent(1)  - when this test is selected, the trigger fires
+        when the mteTriggerValueID object goes from present to absent.
+        changed(2) - when this test is selected, the trigger fires
+        the mteTriggerValueID object value changes.
+
+        Once the trigger has fired for either presence or absence it
+        will not fire again for that state until the object has been
+        to the other state. "
+    DEFVAL { { present, absent } }
+    ::= { mteTriggerExistenceEntry 1 }
+
+mteTriggerExistenceStartup OBJECT-TYPE
+    SYNTAX      BITS { present(0), absent(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Control for whether an event may be triggered when this entry
+        is first set to 'active' and the test specified by
+        mteTriggerExistenceTest is true.  Setting an option causes
+        that trigger to fire when its test is true."
+    DEFVAL { { present, absent } }
+    ::= { mteTriggerExistenceEntry 2 }
+
+mteTriggerExistenceObjectsOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerExistenceObjects, the mteOwner of a
+        group of objects from mteObjectsTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerExistenceEntry 3 }
+
+mteTriggerExistenceObjects OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteObjectsName of a group of objects from
+        mteObjectsTable.  These objects are to be added to any
+        Notification resulting from the firing of this trigger for
+        this test.
+
+        A list of objects may also be added based on the overall
+        trigger, the event or other settings in mteTriggerTest.
+
+        A length of 0 indicates no additional objects."
+    DEFVAL { ''H }
+    ::= { mteTriggerExistenceEntry 4 }
+
+mteTriggerExistenceEventOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerExistenceEvent, the mteOwner of an event
+        entry from the mteEventTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerExistenceEntry 5 }
+
+mteTriggerExistenceEvent OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteEventName of the event to invoke when mteTriggerType is
+        'existence' and this trigger fires.  A length of 0 indicates no
+        event."
+    DEFVAL { ''H }
+    ::= { mteTriggerExistenceEntry 6 }
+
+--
+-- Trigger Boolean Table
+--
+
+mteTriggerBooleanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteTriggerBooleanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event trigger information for boolean
+        triggers."
+    ::= { mteTrigger 5 }
+
+mteTriggerBooleanEntry OBJECT-TYPE
+    SYNTAX      MteTriggerBooleanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single boolean trigger.  Entries
+        automatically exist in this this table for each mteTriggerEntry
+        that has 'boolean' set in mteTriggerTest."
+    INDEX       { mteOwner, IMPLIED mteTriggerName }
+    ::= { mteTriggerBooleanTable 1 }
+
+MteTriggerBooleanEntry ::= SEQUENCE {
+    mteTriggerBooleanComparison          INTEGER,
+    mteTriggerBooleanValue               Integer32,
+    mteTriggerBooleanStartup             TruthValue,
+    mteTriggerBooleanObjectsOwner        SnmpAdminString,
+    mteTriggerBooleanObjects             SnmpAdminString,
+    mteTriggerBooleanEventOwner          SnmpAdminString,
+    mteTriggerBooleanEvent               SnmpAdminString
+}
+
+mteTriggerBooleanComparison OBJECT-TYPE
+    SYNTAX      INTEGER { unequal(1), equal(2),
+                 less(3), lessOrEqual(4),
+                 greater(5), greaterOrEqual(6) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of boolean comparison to perform.
+
+        The value at mteTriggerValueID is compared to
+        mteTriggerBooleanValue, so for example if
+        mteTriggerBooleanComparison is 'less' the result would be true
+        if the value at mteTriggerValueID is less than the value of
+        mteTriggerBooleanValue."
+    DEFVAL { unequal }
+    ::= { mteTriggerBooleanEntry 1 }
+
+mteTriggerBooleanValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value to use for the test specified by
+        mteTriggerBooleanTest."
+    DEFVAL { 0 }
+    ::= { mteTriggerBooleanEntry 2 }
+
+mteTriggerBooleanStartup OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Control for whether an event may be triggered when this entry
+        is first set to 'active' or a new instance of the object at
+        mteTriggerValueID is found and the test specified by
+        mteTriggerBooleanComparison is true.  In that case an event is
+        triggered if mteTriggerBooleanStartup is 'true'."
+    DEFVAL { true }
+    ::= { mteTriggerBooleanEntry 3 }
+
+mteTriggerBooleanObjectsOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerBooleanObjects, the mteOwner of a group
+        of objects from mteObjectsTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerBooleanEntry 4 }
+
+mteTriggerBooleanObjects OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteObjectsName of a group of objects from
+        mteObjectsTable.  These objects are to be added to any
+        Notification resulting from the firing of this trigger for
+        this test.
+
+        A list of objects may also be added based on the overall
+        trigger, the event or other settings in mteTriggerTest.
+
+        A length of 0 indicates no additional objects."
+    DEFVAL { ''H }
+    ::= { mteTriggerBooleanEntry 5 }
+
+mteTriggerBooleanEventOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerBooleanEvent, the mteOwner of an event
+        entry from mteEventTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerBooleanEntry 6 }
+
+mteTriggerBooleanEvent OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteEventName of the event to invoke when mteTriggerType is
+        'boolean' and this trigger fires.  A length of 0 indicates no
+        event."
+    DEFVAL { ''H }
+    ::= { mteTriggerBooleanEntry 7 }
+
+--
+-- Trigger Threshold Table
+--
+
+mteTriggerThresholdTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteTriggerThresholdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event trigger information for threshold
+        triggers."
+    ::= { mteTrigger 6 }
+
+mteTriggerThresholdEntry OBJECT-TYPE
+    SYNTAX      MteTriggerThresholdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single threshold trigger.  Entries
+        automatically exist in this table for each mteTriggerEntry
+        that has 'threshold' set in mteTriggerTest."
+    INDEX       { mteOwner, IMPLIED mteTriggerName }
+    ::= { mteTriggerThresholdTable 1 }
+
+MteTriggerThresholdEntry ::= SEQUENCE {
+    mteTriggerThresholdStartup                  INTEGER,
+    mteTriggerThresholdRising                   Integer32,
+    mteTriggerThresholdFalling                  Integer32,
+    mteTriggerThresholdDeltaRising              Integer32,
+    mteTriggerThresholdDeltaFalling             Integer32,
+    mteTriggerThresholdObjectsOwner             SnmpAdminString,
+    mteTriggerThresholdObjects                  SnmpAdminString,
+    mteTriggerThresholdRisingEventOwner         SnmpAdminString,
+    mteTriggerThresholdRisingEvent              SnmpAdminString,
+    mteTriggerThresholdFallingEventOwner        SnmpAdminString,
+    mteTriggerThresholdFallingEvent             SnmpAdminString,
+    mteTriggerThresholdDeltaRisingEventOwner    SnmpAdminString,
+    mteTriggerThresholdDeltaRisingEvent         SnmpAdminString,
+    mteTriggerThresholdDeltaFallingEventOwner   SnmpAdminString,
+    mteTriggerThresholdDeltaFallingEvent        SnmpAdminString
+}
+
+mteTriggerThresholdStartup OBJECT-TYPE
+    SYNTAX      INTEGER { rising(1), falling(2), risingOrFalling(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The event that may be triggered when this entry is first
+        set to 'active' and a new instance of the object at
+        mteTriggerValueID is found.  If the first sample after this
+        instance becomes active is greater than or equal to
+        mteTriggerThresholdRising and mteTriggerThresholdStartup is
+        equal to 'rising' or 'risingOrFalling', then one
+        mteTriggerThresholdRisingEvent is triggered for that instance.
+        If the first sample after this entry becomes active is less
+        than or equal to mteTriggerThresholdFalling and
+        mteTriggerThresholdStartup is equal to 'falling' or
+        'risingOrFalling', then one mteTriggerThresholdRisingEvent is
+        triggered for that instance."
+    DEFVAL { risingOrFalling }
+    ::= { mteTriggerThresholdEntry 1 }
+
+mteTriggerThresholdRising OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "A threshold value to check against if mteTriggerType is
+        'threshold'.
+
+        When the current sampled value is greater than or equal to
+        this threshold, and the value at the last sampling interval
+        was less than this threshold, one
+        mteTriggerThresholdRisingEvent is triggered.  That event is
+        also triggered if the first sample after this entry becomes
+        active is greater than or equal to this threshold and
+        mteTriggerThresholdStartup is equal to 'rising' or
+        'risingOrFalling'.
+
+        After a rising event is generated, another such event is not
+        triggered until the sampled value falls below this threshold
+        and reaches mteTriggerThresholdFalling."
+    DEFVAL { 0 }
+    ::= { mteTriggerThresholdEntry 2 }
+
+mteTriggerThresholdFalling OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "A threshold value to check against if mteTriggerType is
+        'threshold'.
+
+        When the current sampled value is less than or equal to this
+        threshold, and the value at the last sampling interval was
+        greater than this threshold, one
+        mteTriggerThresholdFallingEvent is triggered.  That event is
+        also triggered if the first sample after this entry becomes
+        active is less than or equal to this threshold and
+        mteTriggerThresholdStartup is equal to 'falling' or
+        'risingOrFalling'.
+
+        After a falling event is generated, another such event is not
+        triggered until the sampled value rises above this threshold
+        and reaches mteTriggerThresholdRising."
+    DEFVAL { 0 }
+    ::= { mteTriggerThresholdEntry 3 }
+
+mteTriggerThresholdDeltaRising OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "A threshold value to check against if mteTriggerType is
+        'threshold'.
+
+        When the delta value (difference) between the current sampled
+        value (value(n)) and the previous sampled value (value(n-1))
+        is greater than or equal to this threshold,
+        and the delta value calculated at the last sampling interval
+        (i.e. value(n-1) - value(n-2)) was less than this threshold,
+        one mteTriggerThresholdDeltaRisingEvent is triggered. That event
+        is also triggered if the first delta value calculated after this
+        entry becomes active, i.e. value(2) - value(1), where value(1)
+        is the first sample taken of that instance, is greater than or
+        equal to this threshold.
+
+        After a rising event is generated, another such event is not
+        triggered until the delta value falls below this threshold and
+        reaches mteTriggerThresholdDeltaFalling."
+    DEFVAL { 0 }
+    ::= { mteTriggerThresholdEntry 4 }
+
+mteTriggerThresholdDeltaFalling OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "A threshold value to check against if mteTriggerType is
+        'threshold'.
+
+        When the delta value (difference) between the current sampled
+        value (value(n)) and the previous sampled value (value(n-1))
+        is less than or equal to this threshold,
+        and the delta value calculated at the last sampling interval
+        (i.e. value(n-1) - value(n-2)) was greater than this threshold,
+        one mteTriggerThresholdDeltaFallingEvent is triggered. That event
+        is also triggered if the first delta value calculated after this
+        entry becomes active, i.e. value(2) - value(1), where value(1)
+        is the first sample taken of that instance, is less than or
+        equal to this threshold.
+
+        After a falling event is generated, another such event is not
+        triggered until the delta value falls below this threshold and
+        reaches mteTriggerThresholdDeltaRising."
+    DEFVAL { 0 }
+    ::= { mteTriggerThresholdEntry 5 }
+
+mteTriggerThresholdObjectsOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerThresholdObjects, the mteOwner of a group
+        of objects from mteObjectsTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 6 }
+
+mteTriggerThresholdObjects OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteObjectsName of a group of objects from
+        mteObjectsTable.  These objects are to be added to any
+        Notification resulting from the firing of this trigger for
+        this test.
+
+        A list of objects may also be added based on the overall
+
+        trigger, the event or other settings in mteTriggerTest.
+
+        A length of 0 indicates no additional objects."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 7 }
+
+mteTriggerThresholdRisingEventOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerThresholdRisingEvent, the mteOwner of an
+        event entry from mteEventTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 8 }
+
+mteTriggerThresholdRisingEvent OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteEventName of the event to invoke when mteTriggerType is
+        'threshold' and this trigger fires based on
+        mteTriggerThresholdRising.  A length of 0 indicates no event."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 9 }
+
+mteTriggerThresholdFallingEventOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerThresholdFallingEvent, the mteOwner of an
+        event entry from mteEventTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 10 }
+
+mteTriggerThresholdFallingEvent OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteEventName of the event to invoke when mteTriggerType is
+        'threshold' and this trigger fires based on
+        mteTriggerThresholdFalling.  A length of 0 indicates no event."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 11 }
+
+mteTriggerThresholdDeltaRisingEventOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerThresholdDeltaRisingEvent, the mteOwner
+        of an event entry from mteEventTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 12 }
+
+mteTriggerThresholdDeltaRisingEvent OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteEventName of the event to invoke when mteTriggerType is
+        'threshold' and this trigger fires based on
+        mteTriggerThresholdDeltaRising. A length of 0 indicates
+        no event."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 13 }
+
+mteTriggerThresholdDeltaFallingEventOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteTriggerThresholdDeltaFallingEvent, the mteOwner
+        of an event entry from mteEventTable."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 14 }
+
+mteTriggerThresholdDeltaFallingEvent OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteEventName of the event to invoke when mteTriggerType is
+        'threshold' and this trigger fires based on
+        mteTriggerThresholdDeltaFalling.  A length of 0 indicates
+        no event."
+    DEFVAL { ''H }
+    ::= { mteTriggerThresholdEntry 15 }
+
+--
+-- Objects Table
+--
+
+mteObjectsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteObjectsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of objects that can be added to notifications based
+        on the trigger, trigger test, or event, as pointed to by
+        entries in those tables."
+    ::= { mteObjects 1 }
+
+mteObjectsEntry OBJECT-TYPE
+    SYNTAX      MteObjectsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A group of objects.  Applications create and delete entries
+        using mteObjectsEntryStatus.
+
+        When adding objects to a notification they are added in the
+        lexical order of their index in this table.  Those associated
+        with a trigger come first, then trigger test, then event."
+    INDEX       { mteOwner, mteObjectsName, mteObjectsIndex }
+    ::= { mteObjectsTable 1 }
+
+MteObjectsEntry ::= SEQUENCE {
+    mteObjectsName                      SnmpAdminString,
+    mteObjectsIndex                     Unsigned32,
+    mteObjectsID                        OBJECT IDENTIFIER,
+    mteObjectsIDWildcard                TruthValue,
+    mteObjectsEntryStatus               RowStatus
+    }
+
+mteObjectsName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A locally-unique, administratively assigned name for a group
+        of objects."
+    ::= { mteObjectsEntry 1 }
+
+mteObjectsIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary integer for the purpose of identifying
+        individual objects within a mteObjectsName group.
+
+        Objects within a group are placed in the notification in the
+        numerical order of this index.
+
+        Groups are placed in the notification in the order of the
+        selections for overall trigger, trigger test, and event.
+        Within trigger test they are in the same order as the
+        numerical values of the bits defined for mteTriggerTest.
+
+        Bad object identifiers or a mismatch between truncating the
+        identifier and the value of mteDeltaDiscontinuityIDWildcard
+        result in operation as one would expect when providing the
+        wrong identifier to a Get operation.  The Get will fail or get
+        the wrong object.  If the object is not available it is omitted
+        from the notification."
+    ::= { mteObjectsEntry 2 }
+
+mteObjectsID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The object identifier of a MIB object to add to a
+        Notification that results from the firing of a trigger.
+
+        This may be wildcarded by truncating all or part of the
+        instance portion, in which case the instance portion of the
+        OID for obtaining this object will be the same as that used
+        in obtaining the mteTriggerValueID that fired.  If such
+        wildcarding is applied, mteObjectsIDWildcard must be
+        'true' and if not it must be 'false'.
+
+        Each instance that fills the wildcard is independent of any
+        additional instances, that is, wildcarded objects operate
+        as if there were a separate table entry for each instance
+        that fills the wildcard without having to actually predict
+        all possible instances ahead of time."
+    DEFVAL { zeroDotZero }
+    ::= { mteObjectsEntry 3 }
+
+mteObjectsIDWildcard OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Control for whether mteObjectsID is to be treated as
+        fully-specified or wildcarded, with 'true' indicating wildcard."
+    DEFVAL { false }
+    ::= { mteObjectsEntry 4 }
+
+mteObjectsEntryStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The control that allows creation and deletion of entries.
+        Once made active an entry MAY not be modified except to
+        delete it."
+    ::= { mteObjectsEntry 5 }
+
+--
+-- Event Section
+--
+
+-- Counters
+
+mteEventFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times an attempt to invoke an event
+        has failed.  This counts individually for each
+        attempt in a group of targets or each attempt for a
+        wildcarded trigger object."
+    ::= { mteEvent 1 }
+
+--
+-- Event Table
+--
+
+mteEventTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteEventEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event action information."
+    ::= { mteEvent 2 }
+
+mteEventEntry OBJECT-TYPE
+    SYNTAX      MteEventEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single event.  Applications create and
+        delete entries using mteEventEntryStatus."
+    INDEX       { mteOwner, IMPLIED mteEventName }
+    ::= { mteEventTable 1 }
+
+MteEventEntry ::= SEQUENCE {
+    mteEventName                        SnmpAdminString,
+    mteEventComment                     SnmpAdminString,
+    mteEventActions                     BITS,
+    mteEventEnabled                     TruthValue,
+    mteEventEntryStatus                 RowStatus
+    }
+
+mteEventName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A locally-unique, administratively assigned name for the
+        event."
+    ::= { mteEventEntry 1 }
+
+mteEventComment OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A description of the event's function and use."
+    DEFVAL { ''H }
+    ::= { mteEventEntry 2 }
+
+mteEventActions OBJECT-TYPE
+    SYNTAX      BITS { notification(0), set(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The actions to perform when this event occurs.
+
+        For 'notification', Traps and/or Informs are sent according
+        to the configuration in the SNMP Notification MIB.
+
+        For 'set', an SNMP Set operation is performed according to
+        control values in this entry."
+    DEFVAL { {} }  -- No bits set.
+    ::= { mteEventEntry 3 }
+
+mteEventEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A control to allow an event to be configured but not used.
+        When the value is 'false' the event does not execute even if
+
+        triggered."
+    DEFVAL { false }
+    ::= { mteEventEntry 4 }
+
+mteEventEntryStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The control that allows creation and deletion of entries.
+        Once made active an entry MAY not be modified except to
+        delete it."
+    ::= { mteEventEntry 5 }
+
+--
+-- Event Notification Table
+--
+
+mteEventNotificationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteEventNotificationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of information about notifications to be sent as a
+        consequence of management events."
+    ::= { mteEvent 3 }
+
+mteEventNotificationEntry OBJECT-TYPE
+    SYNTAX      MteEventNotificationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single event's notification.  Entries
+        automatically exist in this this table for each mteEventEntry
+        that has 'notification' set in mteEventActions."
+    INDEX       { mteOwner, IMPLIED mteEventName }
+    ::= { mteEventNotificationTable 1 }
+
+MteEventNotificationEntry ::= SEQUENCE {
+    mteEventNotification                OBJECT IDENTIFIER,
+    mteEventNotificationObjectsOwner    SnmpAdminString,
+    mteEventNotificationObjects         SnmpAdminString
+    }
+
+mteEventNotification OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The object identifier from the NOTIFICATION-TYPE for the
+        notification to use if metEventActions has 'notification' set."
+    DEFVAL { zeroDotZero }
+    ::= { mteEventNotificationEntry 1 }
+
+mteEventNotificationObjectsOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "To go with mteEventNotificationObjects, the mteOwner of a
+        group of objects from mteObjectsTable."
+    DEFVAL { ''H }
+    ::= { mteEventNotificationEntry 2 }
+
+mteEventNotificationObjects OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The mteObjectsName of a group of objects from
+        mteObjectsTable if mteEventActions has 'notification' set.
+        These objects are to be added to any Notification generated by
+        this event.
+
+        Objects may also be added based on the trigger that stimulated
+        the event.
+
+        A length of 0 indicates no additional objects."
+    DEFVAL { ''H }
+    ::= { mteEventNotificationEntry 3 }
+
+--
+-- Event Set Table
+--
+
+mteEventSetTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MteEventSetEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of management event action information."
+    ::= { mteEvent 4 }
+
+mteEventSetEntry OBJECT-TYPE
+    SYNTAX      MteEventSetEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single event's set option.  Entries
+        automatically exist in this this table for each mteEventEntry
+        that has 'set' set in mteEventActions."
+    INDEX       { mteOwner, IMPLIED mteEventName }
+    ::= { mteEventSetTable 1 }
+
+MteEventSetEntry ::= SEQUENCE {
+    mteEventSetObject                   OBJECT IDENTIFIER,
+    mteEventSetObjectWildcard           TruthValue,
+    mteEventSetValue                    Integer32,
+    mteEventSetTargetTag                SnmpTagValue,
+    mteEventSetContextName              SnmpAdminString,
+    mteEventSetContextNameWildcard      TruthValue
+    }
+
+mteEventSetObject OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The object identifier from the MIB object to set if
+        mteEventActions has 'set' set.
+
+        This object identifier may be wildcarded by leaving
+        sub-identifiers off the end, in which case
+        nteEventSetObjectWildCard must be 'true'.
+
+        If mteEventSetObject is wildcarded the instance used to set the
+        object to which it points is the same as the instance from the
+        value of mteTriggerValueID that triggered the event.
+
+        Each instance that fills the wildcard is independent of any
+        additional instances, that is, wildcarded objects operate
+        as if there were a separate table entry for each instance
+        that fills the wildcard without having to actually predict
+        all possible instances ahead of time.
+
+        Bad object identifiers or a mismatch between truncating the
+        identifier and the value of mteSetObjectWildcard
+        result in operation as one would expect when providing the
+        wrong identifier to a Set operation.  The Set will fail or set
+        the wrong object.  If the value syntax of the destination
+        object is not correct, the Set fails with the normal SNMP
+        error code."
+    DEFVAL { zeroDotZero }
+    ::= { mteEventSetEntry 1 }
+
+mteEventSetObjectWildcard OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Control over whether mteEventSetObject is to be treated as
+        fully-specified or wildcarded, with 'true' indicating wildcard
+        if mteEventActions has 'set' set."
+    DEFVAL { false }
+    ::= { mteEventSetEntry 2 }
+
+mteEventSetValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value to which to set the object at mteEventSetObject
+        if mteEventActions has 'set' set."
+    DEFVAL { 0 }
+    ::= { mteEventSetEntry 3 }
+
+mteEventSetTargetTag OBJECT-TYPE
+    SYNTAX      SnmpTagValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The tag for the target(s) at which to set the object at
+        mteEventSetObject to mteEventSetValue if mteEventActions
+        has 'set' set.
+
+        Systems limited to self management MAY reject a non-zero
+        length for the value of this object.
+
+        A length of 0 indicates the local system.  In this case,
+        access to the objects indicated by mteEventSetObject is under
+        the security credentials of the requester that set
+        mteTriggerEntryStatus to 'active'.  Those credentials are the
+        input parameters for isAccessAllowed from the Architecture for
+        Describing SNMP Management Frameworks.
+
+        Otherwise access rights are checked according to the security
+        parameters resulting from the tag."
+    DEFVAL { ''H }
+    ::= { mteEventSetEntry 4 }
+
+mteEventSetContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The management context in which to set mteEventObjectID.
+        if mteEventActions has 'set' set.
+
+        This may be wildcarded by leaving characters off the end.  To
+        indicate such wildcarding mteEventSetContextNameWildcard must
+        be 'true'.
+
+        If this context name is wildcarded the value used to complete
+        the wildcarding of mteTriggerContextName will be appended."
+    DEFVAL { ''H }
+    ::= { mteEventSetEntry 5 }
+
+mteEventSetContextNameWildcard OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Control for whether mteEventSetContextName is to be treated as
+        fully-specified or wildcarded, with 'true' indicating wildcard
+        if mteEventActions has 'set' set."
+    DEFVAL { false }
+    ::= { mteEventSetEntry 6 }
+
+--
+-- Notifications
+--
+
+dismanEventMIBNotificationPrefix OBJECT IDENTIFIER ::=
+    { dismanEventMIB 2 }
+dismanEventMIBNotifications OBJECT IDENTIFIER ::=
+    { dismanEventMIBNotificationPrefix 0 }
+dismanEventMIBNotificationObjects OBJECT IDENTIFIER
+   ::= { dismanEventMIBNotificationPrefix 1 }
+
+--
+-- Notification Objects
+--
+
+mteHotTrigger OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The name of the trigger causing the notification."
+    ::= { dismanEventMIBNotificationObjects 1 }
+
+mteHotTargetName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The SNMP Target MIB's snmpTargetAddrName related to the
+        notification."
+    ::= { dismanEventMIBNotificationObjects 2 }
+
+mteHotContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The context name related to the notification.  This MUST be as
+        fully-qualified as possible, including filling in wildcard
+        information determined in processing."
+    ::= { dismanEventMIBNotificationObjects 3 }
+
+mteHotOID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The object identifier of the destination object related to the
+        notification.  This MUST be as fully-qualified as possible,
+        including filling in wildcard information determined in
+        processing.
+
+        For a trigger-related notification this is from
+        mteTriggerValueID.
+
+        For a set failure this is from mteEventSetObject."
+    ::= { dismanEventMIBNotificationObjects 4 }
+
+mteHotValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The value of the object at mteTriggerValueID when a
+        trigger fired."
+    ::= { dismanEventMIBNotificationObjects 5 }
+
+mteFailedReason OBJECT-TYPE
+    SYNTAX      FailureReason
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The reason for the failure of an attempt to check for a
+        trigger condition or set an object in response to an event."
+    ::= { dismanEventMIBNotificationObjects 6 }
+
+--
+-- Notifications
+--
+
+mteTriggerFired NOTIFICATION-TYPE
+    OBJECTS { mteHotTrigger,
+              mteHotTargetName,
+              mteHotContextName,
+              mteHotOID,
+              mteHotValue }
+    STATUS  current
+    DESCRIPTION
+        "Notification that the trigger indicated by the object
+        instances has fired, for triggers with mteTriggerType
+        'boolean' or 'existence'."
+    ::= { dismanEventMIBNotifications 1 }
+
+mteTriggerRising NOTIFICATION-TYPE
+    OBJECTS { mteHotTrigger,
+              mteHotTargetName,
+              mteHotContextName,
+              mteHotOID,
+              mteHotValue }
+    STATUS  current
+    DESCRIPTION
+        "Notification that the rising threshold was met for triggers
+        with mteTriggerType 'threshold'."
+    ::= { dismanEventMIBNotifications 2 }
+
+mteTriggerFalling NOTIFICATION-TYPE
+    OBJECTS { mteHotTrigger,
+              mteHotTargetName,
+              mteHotContextName,
+              mteHotOID,
+              mteHotValue }
+    STATUS  current
+    DESCRIPTION
+        "Notification that the falling threshold was met for triggers
+        with mteTriggerType 'threshold'."
+    ::= { dismanEventMIBNotifications 3 }
+
+mteTriggerFailure NOTIFICATION-TYPE
+    OBJECTS { mteHotTrigger,
+              mteHotTargetName,
+              mteHotContextName,
+              mteHotOID,
+              mteFailedReason }
+    STATUS  current
+    DESCRIPTION
+        "Notification that an attempt to check a trigger has failed.
+
+        The network manager must enable this notification only with
+        a certain fear and trembling, as it can easily crowd out more
+        important information.  It should be used only to help diagnose
+        a problem that has appeared in the error counters and can not
+        be found otherwise."
+    ::= { dismanEventMIBNotifications 4 }
+
+mteEventSetFailure NOTIFICATION-TYPE
+    OBJECTS { mteHotTrigger,
+              mteHotTargetName,
+              mteHotContextName,
+              mteHotOID,
+              mteFailedReason }
+    STATUS  current
+    DESCRIPTION
+        "Notification that an attempt to do a set in response to an
+        event has failed.
+
+        The network manager must enable this notification only with
+        a certain fear and trembling, as it can easily crowd out more
+        important information.  It should be used only to help diagnose
+        a problem that has appeared in the error counters and can not
+        be found otherwise."
+    ::= { dismanEventMIBNotifications 5 }
+
+--
+-- Conformance
+--
+
+dismanEventMIBConformance OBJECT IDENTIFIER ::= { dismanEventMIB 3 }
+dismanEventMIBCompliances OBJECT IDENTIFIER ::=
+    { dismanEventMIBConformance 1 }
+dismanEventMIBGroups      OBJECT IDENTIFIER ::=
+    { dismanEventMIBConformance 2 }
+
+-- Compliance
+
+dismanEventMIBCompliance MODULE-COMPLIANCE
+        STATUS current
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                the Event MIB."
+        MODULE  -- this module
+                MANDATORY-GROUPS {
+                        dismanEventResourceGroup,
+                        dismanEventTriggerGroup,
+                        dismanEventObjectsGroup,
+                        dismanEventEventGroup,
+                        dismanEventNotificationObjectGroup,
+                        dismanEventNotificationGroup
+                }
+
+                OBJECT mteTriggerTargetTag
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                        "Write access is not required, thus limiting
+                        monitoring to the local system or pre-configured
+                        remote systems."
+
+                OBJECT mteEventSetTargetTag
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                        "Write access is not required, thus limiting
+                        setting to the local system or pre-configured
+                        remote systems."
+
+                OBJECT mteTriggerValueIDWildcard
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                        "Write access is not required, thus allowing
+                        the system not to implement wildcarding."
+
+                OBJECT mteTriggerContextNameWildcard
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                        "Write access is not required, thus allowing
+                        the system not to implement wildcarding."
+
+                OBJECT mteObjectsIDWildcard
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                        "Write access is not required, thus allowing
+                        the system not to implement wildcarding."
+
+                OBJECT mteEventSetContextNameWildcard
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                        "Write access is not required, thus allowing
+                        the system not to implement wildcarding."
+        ::= { dismanEventMIBCompliances 1 }
+
+-- Units of Conformance
+
+dismanEventResourceGroup OBJECT-GROUP
+        OBJECTS {
+                mteResourceSampleMinimum,
+                mteResourceSampleInstanceMaximum,
+                mteResourceSampleInstances,
+                mteResourceSampleInstancesHigh,
+                mteResourceSampleInstanceLacks
+        }
+        STATUS current
+        DESCRIPTION
+                "Event resource status and control objects."
+        ::= { dismanEventMIBGroups 1 }
+
+dismanEventTriggerGroup OBJECT-GROUP
+        OBJECTS {
+                mteTriggerFailures,
+                mteTriggerComment,
+                mteTriggerTest,
+                mteTriggerSampleType,
+                mteTriggerValueID,
+                mteTriggerValueIDWildcard,
+                mteTriggerTargetTag,
+                mteTriggerContextName,
+                mteTriggerContextNameWildcard,
+                mteTriggerFrequency,
+                mteTriggerObjectsOwner,
+                mteTriggerObjects,
+                mteTriggerEnabled,
+                mteTriggerEntryStatus,
+                mteTriggerDeltaDiscontinuityID,
+                mteTriggerDeltaDiscontinuityIDWildcard,
+                mteTriggerDeltaDiscontinuityIDType,
+                mteTriggerExistenceTest,
+                mteTriggerExistenceStartup,
+                mteTriggerExistenceObjectsOwner,
+                mteTriggerExistenceObjects,
+                mteTriggerExistenceEventOwner,
+                mteTriggerExistenceEvent,
+                mteTriggerBooleanComparison,
+                mteTriggerBooleanValue,
+                mteTriggerBooleanStartup,
+                mteTriggerBooleanObjectsOwner,
+                mteTriggerBooleanObjects,
+                mteTriggerBooleanEventOwner,
+                mteTriggerBooleanEvent,
+                mteTriggerThresholdStartup,
+                mteTriggerThresholdObjectsOwner,
+                mteTriggerThresholdObjects,
+                mteTriggerThresholdRising,
+                mteTriggerThresholdFalling,
+                mteTriggerThresholdDeltaRising,
+                mteTriggerThresholdDeltaFalling,
+                mteTriggerThresholdRisingEventOwner,
+                mteTriggerThresholdRisingEvent,
+                mteTriggerThresholdFallingEventOwner,
+                mteTriggerThresholdFallingEvent,
+                mteTriggerThresholdDeltaRisingEventOwner,
+                mteTriggerThresholdDeltaRisingEvent,
+                mteTriggerThresholdDeltaFallingEventOwner,
+                mteTriggerThresholdDeltaFallingEvent
+        }
+        STATUS current
+        DESCRIPTION
+                "Event triggers."
+        ::= { dismanEventMIBGroups 2 }
+
+dismanEventObjectsGroup OBJECT-GROUP
+        OBJECTS {
+                mteObjectsID,
+                mteObjectsIDWildcard,
+                mteObjectsEntryStatus
+        }
+        STATUS current
+        DESCRIPTION
+                "Supplemental objects."
+        ::= { dismanEventMIBGroups 3 }
+
+dismanEventEventGroup OBJECT-GROUP
+        OBJECTS {
+                mteEventFailures,
+                mteEventComment,
+                mteEventActions,
+                mteEventEnabled,
+                mteEventEntryStatus,
+                mteEventNotification,
+                mteEventNotificationObjectsOwner,
+                mteEventNotificationObjects,
+                mteEventSetObject,
+                mteEventSetObjectWildcard,
+                mteEventSetValue,
+                mteEventSetTargetTag,
+                mteEventSetContextName,
+                mteEventSetContextNameWildcard
+        }
+        STATUS current
+        DESCRIPTION
+                "Events."
+        ::= { dismanEventMIBGroups 4 }
+
+dismanEventNotificationObjectGroup OBJECT-GROUP
+        OBJECTS {
+                mteHotTrigger,
+                mteHotTargetName,
+                mteHotContextName,
+                mteHotOID,
+                mteHotValue,
+                mteFailedReason
+        }
+        STATUS current
+        DESCRIPTION
+                "Notification objects."
+        ::= { dismanEventMIBGroups 5 }
+
+dismanEventNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                mteTriggerFired,
+                mteTriggerRising,
+                mteTriggerFalling,
+                mteTriggerFailure,
+                mteEventSetFailure
+        }
+        STATUS current
+        DESCRIPTION
+                "Notifications."
+        ::= { dismanEventMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-EXPRESSION-MIB.mib b/snmp_builder/mibs/DISMAN-EXPRESSION-MIB.mib
new file mode 100644
index 0000000..f73e5bf
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-EXPRESSION-MIB.mib
@@ -0,0 +1,1182 @@
+DISMAN-EXPRESSION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, Gauge32, Unsigned32,
+    Counter32, Counter64, IpAddress,
+    TimeTicks, mib-2, zeroDotZero  FROM SNMPv2-SMI
+    RowStatus, TruthValue, TimeStamp    FROM SNMPv2-TC
+    sysUpTime                 FROM SNMPv2-MIB
+    SnmpAdminString           FROM SNMP-FRAMEWORK-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP     FROM SNMPv2-CONF;
+
+dismanExpressionMIB MODULE-IDENTITY
+    LAST-UPDATED "200010160000Z" -- 16 October 2000
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO "Ramanathan Kavasseri
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive,
+                  San Jose CA 95134-1706.
+                  Phone: +1 408 527 2446
+                  Email: ramk@cisco.com"
+    DESCRIPTION
+     "The MIB module for defining expressions of MIB objects for
+     management purposes."
+-- Revision History
+
+       REVISION     "200010160000Z" -- 16 October 2000
+       DESCRIPTION  "This is the initial version of this MIB.
+                    Published as RFC 2982"
+    ::= { mib-2 90 }
+
+dismanExpressionMIBObjects OBJECT IDENTIFIER ::=
+                                            { dismanExpressionMIB 1 }
+
+expResource    OBJECT IDENTIFIER ::= { dismanExpressionMIBObjects 1 }
+expDefine OBJECT IDENTIFIER ::= { dismanExpressionMIBObjects 2 }
+expValue  OBJECT IDENTIFIER ::= { dismanExpressionMIBObjects 3 }
+
+--
+-- Resource Control
+--
+
+expResourceDeltaMinimum OBJECT-TYPE
+    SYNTAX      Integer32 (-1 | 1..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+     "The minimum expExpressionDeltaInterval this system will
+     accept.  A system may use the larger values of this minimum to
+     lessen the impact of constantly computing deltas.  For larger
+     delta sampling intervals the system samples less often and
+     suffers less overhead.  This object provides a way to enforce
+     such lower overhead for all expressions created after it is
+     set.
+
+     The value -1 indicates that expResourceDeltaMinimum is
+     irrelevant as the system will not accept 'deltaValue' as a
+     value for expObjectSampleType.
+
+     Unless explicitly resource limited, a system's value for
+     this object should be 1, allowing as small as a 1 second
+     interval for ongoing delta sampling.
+
+     Changing this value will not invalidate an existing setting
+     of expObjectSampleType."
+    ::= { expResource 1 }
+
+expResourceDeltaWildcardInstanceMaximum OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "instances"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+     "For every instance of a deltaValue object, one dynamic instance
+     entry is needed for holding the instance value from the previous
+     sample, i.e. to maintain state.
+
+     This object limits maximum number of dynamic instance entries
+     this system will support for wildcarded delta objects in
+     expressions. For a given delta expression, the number of
+     dynamic instances is the number of values that meet all criteria
+     to exist times the number of delta values in the expression.
+
+     A value of 0 indicates no preset limit, that is, the limit
+     is dynamic based on system operation and resources.
+
+     Unless explicitly resource limited, a system's value for
+     this object should be 0.
+
+     Changing this value will not eliminate or inhibit existing delta
+     wildcard instance objects but will prevent the creation of more
+     such objects.
+
+     An attempt to allocate beyond the limit results in expErrorCode
+     being tooManyWildcardValues for that evaluation attempt."
+    ::= { expResource 2 }
+
+expResourceDeltaWildcardInstances OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "instances"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of currently active instance entries as
+     defined for expResourceDeltaWildcardInstanceMaximum."
+    ::= { expResource 3 }
+
+expResourceDeltaWildcardInstancesHigh OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "instances"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The highest value of expResourceDeltaWildcardInstances
+     that has occurred since initialization of the managed
+     system."
+    ::= { expResource 4 }
+
+expResourceDeltaWildcardInstanceResourceLacks OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "instances"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of times this system could not evaluate an
+     expression because that would have created a value instance in
+     excess of expResourceDeltaWildcardInstanceMaximum."
+    ::= { expResource 5 }
+
+--
+
+-- Definition
+--
+-- Expression Definition Table
+--
+
+expExpressionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ExpExpressionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of expression definitions."
+    ::= { expDefine 1 }
+
+expExpressionEntry OBJECT-TYPE
+    SYNTAX      ExpExpressionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Information about a single expression.  New expressions
+     can be created using expExpressionRowStatus.
+
+     To create an expression first create the named entry in this
+     table.  Then use expExpressionName to populate expObjectTable.
+     For expression evaluation to succeed all related entries in
+     expExpressionTable and expObjectTable must be 'active'.  If
+     these conditions are not met the corresponding values in
+     expValue simply are not instantiated.
+
+     Deleting an entry deletes all related entries in expObjectTable
+     and expErrorTable.
+
+     Because of the relationships among the multiple tables for an
+     expression (expExpressionTable, expObjectTable, and
+     expValueTable) and the SNMP rules for independence in setting
+     object values, it is necessary to do final error checking when
+     an expression is evaluated, that is, when one of its instances
+     in expValueTable is read or a delta interval expires.  Earlier
+     checking need not be done and an implementation may not impose
+     any ordering on the creation of objects related to an
+     expression.
+
+     To maintain security of MIB information, when creating a new row in
+     this table, the managed system must record the security credentials
+     of the requester.  These security credentials are the parameters
+     necessary as inputs to isAccessAllowed from the Architecture for
+
+     Describing SNMP Management Frameworks.  When obtaining the objects
+     that make up the expression, the system must (conceptually) use
+     isAccessAllowed to ensure that it does not violate security.
+
+     The evaluation of the expression takes place under the
+     security credentials of the creator of its expExpressionEntry.
+
+     Values of read-write objects in this table may be changed
+
+     at any time."
+    INDEX       { expExpressionOwner, expExpressionName }
+    ::= { expExpressionTable 1 }
+
+ExpExpressionEntry ::= SEQUENCE {
+    expExpressionOwner           SnmpAdminString,
+    expExpressionName             SnmpAdminString,
+    expExpression                OCTET STRING,
+    expExpressionValueType       INTEGER,
+    expExpressionComment         SnmpAdminString,
+    expExpressionDeltaInterval   Integer32,
+    expExpressionPrefix           OBJECT IDENTIFIER,
+    expExpressionErrors          Counter32,
+    expExpressionEntryStatus     RowStatus
+}
+
+expExpressionOwner OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "The owner of this entry. The exact semantics of this
+     string are subject to the security policy defined by the
+     security administrator."
+    ::= { expExpressionEntry 1 }
+
+expExpressionName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "The name of the expression.  This is locally unique, within
+     the scope of an expExpressionOwner."
+    ::= { expExpressionEntry 2 }
+
+expExpression OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (1..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The expression to be evaluated.  This object is the same
+     as a DisplayString (RFC 1903) except for its maximum length.
+
+     Except for the variable names the expression is in ANSI C
+     syntax.  Only the subset of ANSI C operators and functions
+     listed here is allowed.
+
+     Variables are expressed as a dollar sign ('$') and an
+
+     integer that corresponds to an expObjectIndex.  An
+     example of a valid expression is:
+
+          ($1-$5)*100
+
+     Expressions must not be recursive, that is although an expression
+     may use the results of another expression, it must not contain
+     any variable that is directly or indirectly a result of its own
+     evaluation. The managed system must check for recursive
+     expressions.
+
+     The only allowed operators are:
+
+          ( )
+          - (unary)
+          + - * / %
+          & | ^ << >> ~
+          ! && || == != > >= < <=
+
+     Note the parentheses are included for parenthesizing the
+     expression, not for casting data types.
+
+     The only constant types defined are:
+
+          int (32-bit signed)
+          long (64-bit signed)
+          unsigned int
+          unsigned long
+          hexadecimal
+          character
+          string
+          oid
+
+     The default type for a positive integer is int unless it is too
+     large in which case it is long.
+
+     All but oid are as defined for ANSI C.  Note that a
+     hexadecimal constant may end up as a scalar or an array of
+     8-bit integers.  A string constant is enclosed in double
+     quotes and may contain back-slashed individual characters
+     as in ANSI C.
+
+     An oid constant comprises 32-bit, unsigned integers and at
+     least one period, for example:
+
+          0.
+          .0
+          1.3.6.1
+
+     No additional leading or trailing subidentifiers are automatically
+     added to an OID constant.  The constant is taken as expressed.
+
+     Integer-typed objects are treated as 32- or 64-bit, signed
+     or unsigned integers, as appropriate.  The results of
+     mixing them are as for ANSI C, including the type of the
+     result.  Note that a 32-bit value is thus promoted to 64 bits
+     only in an operation with a 64-bit value.  There is no
+     provision for larger values to handle overflow.
+
+     Relative to SNMP data types, a resulting value becomes
+     unsigned when calculating it uses any unsigned value,
+     including a counter.  To force the final value to be of
+     data type counter the expression must explicitly use the
+     counter32() or counter64() function (defined below).
+
+     OCTET STRINGS and OBJECT IDENTIFIERs are treated as
+     one-dimensioned arrays of unsigned 8-bit integers and
+     unsigned 32-bit integers, respectively.
+
+     IpAddresses are treated as 32-bit, unsigned integers in
+     network byte order, that is, the hex version of 255.0.0.0 is
+     0xff000000.
+
+     Conditional expressions result in a 32-bit, unsigned integer
+     of value 0 for false or 1 for true. When an arbitrary value
+     is used as a boolean 0 is false and non-zero is true.
+
+     Rules for the resulting data type from an operation, based on
+     the operator:
+
+     For << and >> the result is the same as the left hand operand.
+
+     For &&, ||, ==, !=, <, <=, >, and >= the result is always
+     Unsigned32.
+
+     For unary - the result is always Integer32.
+
+     For +, -, *, /, %, &, |, and ^ the result is promoted according
+     to the following rules, in order from most to least preferred:
+
+          If left hand and right hand operands are the same type,
+          use that.
+
+          If either side is Counter64, use that.
+
+          If either side is IpAddress, use that.
+
+          If either side is TimeTicks, use that.
+
+          If either side is Counter32, use that.
+
+          Otherwise use Unsigned32.
+
+     The following rules say what operators apply with what data
+     types.  Any combination not explicitly defined does not work.
+
+     For all operators any of the following can be the left hand or
+     right hand operand: Integer32, Counter32, Unsigned32, Counter64.
+
+     The operators +, -, *, /, %, <, <=, >, and >= work with
+     TimeTicks.
+
+     The operators &, |, and ^ work with IpAddress.
+
+     The operators << and >> work with IpAddress but only as the
+     left hand operand.
+
+     The + operator performs a concatenation of two OCTET STRINGs or
+     two OBJECT IDENTIFIERs.
+
+     The operators &, | perform bitwise operations on OCTET STRINGs.
+     If the OCTET STRING happens to be a DisplayString the results
+     may be meaningless, but the agent system does not check this as
+     some such systems do not have this information.
+
+     The operators << and >> perform bitwise operations on OCTET
+     STRINGs appearing as the left hand operand.
+
+     The only functions defined are:
+
+          counter32
+          counter64
+          arraySection
+          stringBegins
+          stringEnds
+          stringContains
+          oidBegins
+          oidEnds
+          oidContains
+          average
+          maximum
+          minimum
+          sum
+          exists
+
+     The following function definitions indicate their parameters by
+     naming the data type of the parameter in the parameter's position
+     in the parameter list.  The parameter must be of the type indicated
+     and generally may be a constant, a MIB object, a function, or an
+     expression.
+
+     counter32(integer) - wrapped around an integer value counter32
+     forces Counter32 as a data type.
+
+     counter64(integer) - similar to counter32 except that the
+     resulting data type is 'counter64'.
+
+     arraySection(array, integer, integer) - selects a piece of an
+     array (i.e. part of an OCTET STRING or OBJECT IDENTIFIER).  The
+     integer arguments are in the range 0 to 4,294,967,295.  The
+     first is an initial array index (one-dimensioned) and the second
+     is an ending array index.  A value of 0 indicates first or last
+     element, respectively.  If the first element is larger than the
+     array length the result is 0 length.  If the second integer is
+     less than or equal to the first, the result is 0 length.  If the
+     second is larger than the array length it indicates last
+     element.
+
+     stringBegins/Ends/Contains(octetString, octetString) - looks for
+     the second string (which can be a string constant) in the first
+     and returns the one-dimensioned arrayindex where the match began.
+     A return value of 0 indicates no match (i.e. boolean false).
+
+     oidBegins/Ends/Contains(oid, oid) - looks for the second OID
+     (which can be an OID constant) in the first and returns the
+     the one-dimensioned index where the match began. A return value
+     of 0 indicates no match (i.e. boolean false).
+
+     average/maximum/minimum(integer) - calculates the average,
+     minimum, or maximum value of the integer valued object over
+     multiple sample times.  If the object disappears for any
+     sample period, the accumulation and the resulting value object
+     cease to exist until the object reappears at which point the
+     calculation starts over.
+
+     sum(integerObject*) - sums all available values of the
+     wildcarded integer object, resulting in an integer scalar.  Must
+     be used with caution as it wraps on overflow with no
+     notification.
+
+     exists(anyTypeObject) - verifies the object instance exists. A
+     return value of 0 indicates NoSuchInstance (i.e. boolean
+     false)."
+    ::= { expExpressionEntry 3 }
+
+expExpressionValueType OBJECT-TYPE
+    SYNTAX      INTEGER { counter32(1), unsigned32(2), timeTicks(3),
+                 integer32(4), ipAddress(5), octetString(6),
+                 objectId(7), counter64(8) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The type of the expression value.  One and only one of the
+     value objects in expValueTable will be instantiated to match
+     this type.
+
+     If the result of the expression can not be made into this type,
+     an invalidOperandType error will occur."
+    DEFVAL      { counter32 }
+    ::= { expExpressionEntry 4 }
+
+expExpressionComment OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "A comment to explain the use or meaning of the expression."
+    DEFVAL      { ''H }
+    ::= { expExpressionEntry 5 }
+
+expExpressionDeltaInterval OBJECT-TYPE
+    SYNTAX      Integer32 (0..86400)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "Sampling interval for objects in this expression with
+     expObjectSampleType 'deltaValue'.
+
+     This object has no effect if the the expression has no
+     deltaValue objects.
+
+     A value of 0 indicates no automated sampling.  In this case
+     the delta is the difference from the last time the expression
+     was evaluated.  Note that this is subject to unpredictable
+     delta times in the face of retries or multiple managers.
+
+     A value greater than zero is the number of seconds between
+     automated samples.
+
+     Until the delta interval has expired once the delta for the
+
+     object is effectively not instantiated and evaluating
+     the expression has results as if the object itself were not
+     instantiated.
+
+     Note that delta values potentially consume large amounts of
+     system CPU and memory.  Delta state and processing must
+     continue constantly even if the expression is not being used.
+     That is, the expression is being evaluated every delta interval,
+     even if no application is reading those values.  For wildcarded
+     objects this can be substantial overhead.
+
+     Note that delta intervals, external expression value sampling
+     intervals and delta intervals for expressions within other
+     expressions can have unusual interactions as they are impossible
+     to synchronize accurately.  In general one interval embedded
+     below another must be enough shorter that the higher sample
+     sees relatively smooth, predictable behavior.  So, for example,
+     to avoid the higher level getting the same sample twice, the
+     lower level should sample at least twice as fast as the higher
+     level does."
+    DEFVAL      { 0 }
+    ::= { expExpressionEntry 6 }
+
+expExpressionPrefix OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "An object prefix to assist an application in determining
+     the instance indexing to use in expValueTable, relieving the
+     application of the need to scan the expObjectTable to
+     determine such a prefix.
+
+     See expObjectTable for information on wildcarded objects.
+
+     If the expValueInstance portion of the value OID may
+     be treated as a scalar (that is, normally, 0) the value of
+     expExpressionPrefix is zero length, that is, no OID at all.
+     Note that zero length implies a null OID, not the OID 0.0.
+
+     Otherwise, the value of expExpressionPrefix is the expObjectID
+     value of any one of the wildcarded objects for the expression.
+     This is sufficient, as the remainder, that is, the instance
+     fragment relevant to instancing the values, must be the same for
+     all wildcarded objects in the expression."
+    ::= { expExpressionEntry 7 }
+
+expExpressionErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of errors encountered while evaluating this
+     expression.
+
+     Note that an object in the expression not being accessible,
+     is not considered an error. An example of an inaccessible
+     object is when the object is excluded from the view of the
+     user whose security credentials are used in the expression
+     evaluation. In such cases, it is a legitimate condition
+     that causes the corresponding expression value not to be
+     instantiated."
+    ::= { expExpressionEntry 8 }
+
+expExpressionEntryStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The control that allows creation and deletion of entries."
+    ::= { expExpressionEntry 9 }
+
+--
+-- Expression Error Table
+--
+
+expErrorTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ExpErrorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of expression errors."
+    ::= { expDefine 2 }
+
+expErrorEntry OBJECT-TYPE
+    SYNTAX      ExpErrorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Information about errors in processing an expression.
+
+     Entries appear in this table only when there is a matching
+     expExpressionEntry and then only when there has been an
+     error for that expression as reflected by the error codes
+     defined for expErrorCode."
+    INDEX       { expExpressionOwner, expExpressionName }
+    ::= { expErrorTable 1 }
+
+ExpErrorEntry ::= SEQUENCE {
+    expErrorTime       TimeStamp,
+    expErrorIndex      Integer32,
+    expErrorCode       INTEGER,
+    expErrorInstance   OBJECT IDENTIFIER
+}
+
+expErrorTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value of sysUpTime the last time an error caused a
+     failure to evaluate this expression."
+    ::= { expErrorEntry 1 }
+
+expErrorIndex OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The one-dimensioned character array index into
+     expExpression for where the error occurred.  The value
+     zero indicates irrelevance."
+    ::= { expErrorEntry 2 }
+
+expErrorCode OBJECT-TYPE
+    SYNTAX      INTEGER {
+          invalidSyntax(1),
+          undefinedObjectIndex(2),
+          unrecognizedOperator(3),
+          unrecognizedFunction(4),
+          invalidOperandType(5),
+          unmatchedParenthesis(6),
+          tooManyWildcardValues(7),
+          recursion(8),
+          deltaTooShort(9),
+          resourceUnavailable(10),
+          divideByZero(11)
+          }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The error that occurred.  In the following explanations the
+     expected timing of the error is in parentheses.  'S' means
+     the error occurs on a Set request.  'E' means the error
+
+     occurs on the attempt to evaluate the expression either due to
+     Get from expValueTable or in ongoing delta processing.
+
+     invalidSyntax       the value sent for expExpression is not
+                    valid Expression MIB expression syntax
+                    (S)
+     undefinedObjectIndex     an object reference ($n) in
+                    expExpression does not have a matching
+                    instance in expObjectTable (E)
+     unrecognizedOperator     the value sent for expExpression held an
+                    unrecognized operator (S)
+     unrecognizedFunction     the value sent for expExpression held an
+                    unrecognized function name (S)
+     invalidOperandType  an operand in expExpression is not the
+                    right type for the associated operator
+                    or result (SE)
+     unmatchedParenthesis     the value sent for expExpression is not
+                    correctly parenthesized (S)
+     tooManyWildcardValues    evaluating the expression exceeded the
+                    limit set by
+                    expResourceDeltaWildcardInstanceMaximum
+                    (E)
+     recursion      through some chain of embedded
+                    expressions the expression invokes itself
+                    (E)
+     deltaTooShort       the delta for the next evaluation passed
+                    before the system could evaluate the
+                    present sample (E)
+     resourceUnavailable some resource, typically dynamic memory,
+                    was unavailable (SE)
+     divideByZero        an attempt to divide by zero occurred
+                    (E)
+
+     For the errors that occur when the attempt is made to set
+     expExpression Set request fails with the SNMP error code
+     'wrongValue'.  Such failures refer to the most recent failure to
+     Set expExpression, not to the present value of expExpression
+     which must be either unset or syntactically correct.
+
+     Errors that occur during evaluation for a Get* operation return
+     the SNMP error code 'genErr' except for 'tooManyWildcardValues'
+     and 'resourceUnavailable' which return the SNMP error code
+     'resourceUnavailable'."
+    ::= { expErrorEntry 3 }
+
+expErrorInstance OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The expValueInstance being evaluated when the error
+     occurred.  A zero-length indicates irrelevance."
+    ::= { expErrorEntry 4 }
+
+--
+-- Object Table
+--
+
+expObjectTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ExpObjectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of object definitions for each expExpression.
+
+     Wildcarding instance IDs:
+
+     It is legal to omit all or part of the instance portion for
+     some or all of the objects in an expression. (See the
+     DESCRIPTION of expObjectID for details.  However, note that
+     if more than one object in the same expression is wildcarded
+     in this way, they all must be objects where that portion of
+     the instance is the same.  In other words, all objects may be
+     in the same SEQUENCE or in different SEQUENCEs but with the
+     same semantic index value (e.g., a value of ifIndex)
+     for the wildcarded portion."
+    ::= { expDefine 3 }
+
+expObjectEntry OBJECT-TYPE
+    SYNTAX      ExpObjectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Information about an object.  An application uses
+     expObjectEntryStatus to create entries in this table while
+     in the process of defining an expression.
+
+     Values of read-create objects in this table may be
+     changed at any time."
+    INDEX       { expExpressionOwner, expExpressionName, expObjectIndex }
+    ::= { expObjectTable 1 }
+
+ExpObjectEntry ::= SEQUENCE {
+    expObjectIndex                     Unsigned32,
+    expObjectID                        OBJECT IDENTIFIER,
+    expObjectIDWildcard                TruthValue,
+    expObjectSampleType                INTEGER,
+    expObjectDeltaDiscontinuityID      OBJECT IDENTIFIER,
+    expObjectDiscontinuityIDWildcard   TruthValue,
+    expObjectDiscontinuityIDType       INTEGER,
+    expObjectConditional               OBJECT IDENTIFIER,
+    expObjectConditionalWildcard       TruthValue,
+    expObjectEntryStatus               RowStatus
+}
+
+expObjectIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Within an expression, a unique, numeric identification for an
+     object.  Prefixed with a dollar sign ('$') this is used to
+     reference the object in the corresponding expExpression."
+    ::= { expObjectEntry 1 }
+
+expObjectID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The OBJECT IDENTIFIER (OID) of this object.  The OID may be
+     fully qualified, meaning it includes a complete instance
+     identifier part (e.g., ifInOctets.1 or sysUpTime.0), or it
+     may not be fully qualified, meaning it may lack all or part
+     of the instance identifier.  If the expObjectID is not fully
+     qualified, then expObjectWildcard must be set to true(1).
+     The value of the expression will be multiple
+     values, as if done for a GetNext sweep of the object.
+
+     An object here may itself be the result of an expression but
+     recursion is not allowed.
+
+     NOTE:  The simplest implementations of this MIB may not allow
+     wildcards."
+    ::= { expObjectEntry 2 }
+
+expObjectIDWildcard  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A true value indicates the expObjecID of this row is a wildcard
+        object. False indicates that expObjectID is fully instanced.
+        If all expObjectWildcard values for a given expression are FALSE,
+        expExpressionPrefix will reflect a scalar object (i.e. will
+        be 0.0).
+
+        NOTE:  The simplest implementations of this MIB may not allow
+        wildcards."
+    DEFVAL      { false }
+    ::= { expObjectEntry 3 }
+
+expObjectSampleType OBJECT-TYPE
+    SYNTAX      INTEGER { absoluteValue(1), deltaValue(2),
+                          changedValue(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The method of sampling the selected variable.
+
+     An 'absoluteValue' is simply the present value of the object.
+
+     A 'deltaValue' is the present value minus the previous value,
+     which was sampled expExpressionDeltaInterval seconds ago.
+     This is intended primarily for use with SNMP counters, which are
+     meaningless as an 'absoluteValue', but may be used with any
+     integer-based value.
+
+     A 'changedValue' is a boolean for whether the present value is
+     different from the previous value.  It is applicable to any data
+     type and results in an Unsigned32 with value 1 if the object's
+     value is changed and 0 if not.  In all other respects it is as a
+     'deltaValue' and all statements and operation regarding delta
+     values apply to changed values.
+
+     When an expression contains both delta and absolute values
+     the absolute values are obtained at the end of the delta
+     period."
+    DEFVAL      { absoluteValue }
+    ::= { expObjectEntry 4 }
+
+sysUpTimeInstance OBJECT IDENTIFIER ::= { sysUpTime 0 }
+
+expObjectDeltaDiscontinuityID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The OBJECT IDENTIFIER (OID) of a TimeTicks, TimeStamp, or
+     DateAndTime object that indicates a discontinuity in the value
+     at expObjectID.
+
+     This object is instantiated only if expObjectSampleType is
+     'deltaValue' or 'changedValue'.
+
+     The OID may be for a leaf object (e.g. sysUpTime.0) or may
+     be wildcarded to match expObjectID.
+
+     This object supports normal checking for a discontinuity in a
+     counter.  Note that if this object does not point to sysUpTime
+     discontinuity checking must still check sysUpTime for an overall
+     discontinuity.
+
+     If the object identified is not accessible no discontinuity
+     check will be made."
+    DEFVAL      { sysUpTimeInstance }
+    ::= { expObjectEntry 5 }
+
+expObjectDiscontinuityIDWildcard OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A true value indicates the expObjectDeltaDiscontinuityID of
+     this row is a wildcard object.  False indicates that
+     expObjectDeltaDiscontinuityID is fully instanced.
+
+     This object is instantiated only if expObjectSampleType is
+     'deltaValue' or 'changedValue'.
+
+     NOTE:  The simplest implementations of this MIB may not allow
+     wildcards."
+    DEFVAL      { false }
+     ::= { expObjectEntry 6 }
+
+expObjectDiscontinuityIDType OBJECT-TYPE
+     SYNTAX      INTEGER { timeTicks(1), timeStamp(2), dateAndTime(3) }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "The value 'timeTicks' indicates the expObjectDeltaDiscontinuityID
+     of this row is of syntax TimeTicks.  The value 'timeStamp' indicates
+     syntax TimeStamp.  The value 'dateAndTime indicates syntax
+     DateAndTime.
+
+     This object is instantiated only if expObjectSampleType is
+     'deltaValue' or 'changedValue'."
+    DEFVAL      { timeTicks }
+     ::= { expObjectEntry 7 }
+
+expObjectConditional OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The OBJECT IDENTIFIER (OID) of an object that overrides
+     whether the instance of expObjectID is to be considered
+     usable.  If the value of the object at expObjectConditional
+     is 0 or not instantiated, the object at expObjectID is
+     treated as if it is not instantiated.  In other words,
+     expObjectConditional is a filter that controls whether or
+     not to use the value at expObjectID.
+
+     The OID may be for a leaf object (e.g. sysObjectID.0) or may be
+     wildcarded to match expObjectID.  If expObject is wildcarded and
+     expObjectID in the same row is not, the wild portion of
+     expObjectConditional must match the wildcarding of the rest of
+     the expression.  If no object in the expression is wildcarded
+     but expObjectConditional is, use the lexically first instance
+     (if any) of expObjectConditional.
+
+     If the value of expObjectConditional is 0.0 operation is
+     as if the value pointed to by expObjectConditional is a
+     non-zero (true) value.
+
+     Note that expObjectConditional can not trivially use an object
+     of syntax TruthValue, since the underlying value is not 0 or 1."
+    DEFVAL      { zeroDotZero }
+    ::= { expObjectEntry 8 }
+
+ expObjectConditionalWildcard  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A true value indicates the expObjectConditional of this row is
+     a wildcard object. False indicates that expObjectConditional is
+     fully instanced.
+
+     NOTE: The simplest implementations of this MIB may not allow
+     wildcards."
+    DEFVAL      { false }
+     ::= { expObjectEntry 9 }
+
+expObjectEntryStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+     "The control that allows creation/deletion of entries.
+
+     Objects in this table may be changed while
+     expObjectEntryStatus is in any state."
+    ::= { expObjectEntry 10 }
+
+--
+-- Expression Value Table
+--
+
+expValueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ExpValueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of values from evaluated expressions."
+    ::= { expValue 1 }
+
+expValueEntry OBJECT-TYPE
+    SYNTAX      ExpValueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A single value from an evaluated expression.  For a given
+     instance, only one 'Val' object in the conceptual row will be
+     instantiated, that is, the one with the appropriate type for
+     the value.  For values that contain no objects of
+     expObjectSampleType 'deltaValue' or 'changedValue', reading a
+     value from the table causes the evaluation of the expression
+     for that value.  For those that contain a 'deltaValue' or
+     'changedValue' the value read is as of the last sampling
+     interval.
+
+     If in the attempt to evaluate the expression one or more
+     of the necessary objects is not available, the corresponding
+     entry in this table is effectively not instantiated.
+
+     To maintain security of MIB information, when creating a new
+     row in this table, the managed system must record the security
+     credentials of the requester.  These security credentials are
+     the parameters necessary as inputs to isAccessAllowed from
+     [RFC2571]. When obtaining the objects that make up the
+     expression, the system must (conceptually) use isAccessAllowed to
+     ensure that it does not violate security.
+
+     The evaluation of that expression takes place under the
+
+     security credentials of the creator of its expExpressionEntry.
+
+     To maintain security of MIB information, expression evaluation must
+     take place using security credentials for the implied Gets of the
+     objects in the expression as inputs (conceptually) to
+     isAccessAllowed from the Architecture for Describing SNMP
+     Management Frameworks.  These are the security credentials of the
+     creator of the corresponding expExpressionEntry."
+    INDEX       { expExpressionOwner, expExpressionName,
+                  IMPLIED expValueInstance }
+    ::= { expValueTable 1 }
+
+ExpValueEntry ::= SEQUENCE {
+    expValueInstance          OBJECT IDENTIFIER,
+    expValueCounter32Val      Counter32,
+    expValueUnsigned32Val     Unsigned32,
+    expValueTimeTicksVal      TimeTicks,
+    expValueInteger32Val      Integer32,
+    expValueIpAddressVal      IpAddress,
+    expValueOctetStringVal    OCTET STRING,
+    expValueOidVal            OBJECT IDENTIFIER,
+    expValueCounter64Val      Counter64
+}
+
+expValueInstance OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "The final instance portion of a value's OID according to
+     the wildcarding in instances of expObjectID for the
+     expression.  The prefix of this OID fragment is 0.0,
+     leading to the following behavior.
+
+     If there is no wildcarding, the value is 0.0.0.  In other
+     words, there is one value which standing alone would have
+     been a scalar with a 0 at the end of its OID.
+
+     If there is wildcarding, the value is 0.0 followed by
+     a value that the wildcard can take, thus defining one value
+     instance for each real, possible value of the wildcard.
+     So, for example, if the wildcard worked out to be an ifIndex,
+     there is an expValueInstance for each applicable ifIndex."
+    ::= { expValueEntry 1 }
+
+expValueCounter32Val OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'counter32'."
+    ::= { expValueEntry 2 }
+
+expValueUnsigned32Val OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'unsigned32'."
+    ::= { expValueEntry 3 }
+
+expValueTimeTicksVal OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'timeTicks'."
+    ::= { expValueEntry 4 }
+
+expValueInteger32Val OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'integer32'."
+    ::= { expValueEntry 5 }
+
+expValueIpAddressVal OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'ipAddress'."
+    ::= { expValueEntry 6 }
+
+expValueOctetStringVal OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..65536))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'octetString'."
+    ::= { expValueEntry 7 }
+
+expValueOidVal OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'objectId'."
+    ::= { expValueEntry 8 }
+
+expValueCounter64Val OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when expExpressionValueType is 'counter64'."
+    ::= { expValueEntry 9 }
+
+--
+-- Conformance
+--
+
+dismanExpressionMIBConformance OBJECT IDENTIFIER ::=
+    { dismanExpressionMIB 3 }
+dismanExpressionMIBCompliances OBJECT IDENTIFIER ::=
+    { dismanExpressionMIBConformance 1 }
+dismanExpressionMIBGroups      OBJECT IDENTIFIER ::=
+    { dismanExpressionMIBConformance 2 }
+
+-- Compliance
+
+dismanExpressionMIBCompliance MODULE-COMPLIANCE
+     STATUS current
+     DESCRIPTION
+          "The compliance statement for entities which implement
+          the Expression MIB."
+     MODULE    -- this module
+          MANDATORY-GROUPS {
+               dismanExpressionResourceGroup,
+               dismanExpressionDefinitionGroup,
+               dismanExpressionValueGroup
+          }
+
+     OBJECT         expResourceDeltaMinimum
+     SYNTAX         Integer32 (-1 | 60..600)
+     DESCRIPTION
+          "Implementation need not allow deltas or it may
+          implement them and restrict them to higher values."
+
+     OBJECT         expObjectSampleType
+     WRITE-SYNTAX   INTEGER { absoluteValue(1) }
+     DESCRIPTION
+          "Implementation may disallow deltas calculation or
+
+          change detection."
+
+     OBJECT         expObjectIDWildcard
+     WRITE-SYNTAX   INTEGER { false(2) }
+     DESCRIPTION
+          "Implementation may allow wildcards."
+
+     OBJECT         expObjectDiscontinuityIDWildcard
+     WRITE-SYNTAX   INTEGER { false(2) }
+     DESCRIPTION
+          "Implementation need not allow wildcards."
+
+     OBJECT          expObjectConditionalWildcard
+     WRITE-SYNTAX   INTEGER { false(2) }
+     DESCRIPTION
+          "Implementation need not allow deltas wildcards."
+     ::= { dismanExpressionMIBCompliances 1 }
+
+-- Units of Conformance
+
+dismanExpressionResourceGroup OBJECT-GROUP
+     OBJECTS {
+          expResourceDeltaMinimum,
+          expResourceDeltaWildcardInstanceMaximum,
+          expResourceDeltaWildcardInstances,
+          expResourceDeltaWildcardInstancesHigh,
+          expResourceDeltaWildcardInstanceResourceLacks
+     }
+     STATUS current
+     DESCRIPTION
+          "Expression definition resource management."
+     ::= { dismanExpressionMIBGroups 1 }
+
+dismanExpressionDefinitionGroup OBJECT-GROUP
+     OBJECTS {
+          expExpression,
+          expExpressionValueType,
+          expExpressionComment,
+          expExpressionDeltaInterval,
+          expExpressionPrefix,
+          expExpressionErrors,
+          expExpressionEntryStatus,
+          expErrorTime,
+          expErrorIndex,
+          expErrorCode,
+          expErrorInstance,
+          expObjectID,
+          expObjectIDWildcard,
+          expObjectSampleType,
+          expObjectDeltaDiscontinuityID,
+          expObjectDiscontinuityIDWildcard,
+          expObjectDiscontinuityIDType,
+          expObjectConditional,
+          expObjectConditionalWildcard,
+          expObjectEntryStatus
+     }
+     STATUS current
+     DESCRIPTION
+          "Expression definition."
+     ::= { dismanExpressionMIBGroups 2 }
+
+dismanExpressionValueGroup OBJECT-GROUP
+     OBJECTS {
+          expValueCounter32Val,
+          expValueUnsigned32Val,
+          expValueTimeTicksVal,
+          expValueInteger32Val,
+          expValueIpAddressVal,
+          expValueOctetStringVal,
+          expValueOidVal,
+          expValueCounter64Val
+     }
+     STATUS current
+     DESCRIPTION
+          "Expression value."
+     ::= { dismanExpressionMIBGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-NSLOOKUP-MIB.mib b/snmp_builder/mibs/DISMAN-NSLOOKUP-MIB.mib
new file mode 100644
index 0000000..b12ca53
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-NSLOOKUP-MIB.mib
@@ -0,0 +1,509 @@
+DISMAN-NSLOOKUP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, mib-2, Integer32
+        FROM SNMPv2-SMI                  -- RFC2578
+    RowStatus
+        FROM SNMPv2-TC                   -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                 -- RFC2580
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- RFC3411
+    InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB;           -- RFC4001
+
+ lookupMIB MODULE-IDENTITY
+    LAST-UPDATED "200606130000Z"         -- 13 June 2006
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO
+        "Juergen Quittek
+
+        NEC Europe Ltd.
+        Network Laboratories
+        Kurfuersten-Anlage 36
+        69115 Heidelberg
+        Germany
+
+        Phone: +49 6221 4342-115
+        Email: quittek@netlab.nec.de"
+    DESCRIPTION
+        "The Lookup MIB (DISMAN-NSLOOKUP-MIB) enables determination
+        of either the name(s) corresponding to a host address or of
+        the address(es) associated with a host name at a remote
+        host.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4560; see the RFC itself for
+        full legal notices."
+
+     --  Revision history
+
+     REVISION     "200606130000Z"         -- 13 June 2006
+     DESCRIPTION
+         "Updated version, published as RFC 4560.
+             - Replaced references to RFC 2575 by RFC 3415
+             - Replaced references to RFC 2571 by RFC 3411
+             - Replaced references to RFC 2851 by RFC 4001
+             - Added value enabled(1) to SYNTAX clause of
+               lookupCtlOperStatus
+             - Added lookupMinimumCompliance
+             - Defined semantics of value 0 for object
+               lookupPurgeTime
+             - Added DEFVAL { unknown } to object
+               lookupCtlTargetAddressType OBJECT-TYPE"
+
+     REVISION     "200009210000Z"         -- 21 September 2000
+     DESCRIPTION
+         "Initial version, published as RFC 2925."
+    ::= { mib-2 82 }
+
+ -- Top level structure of the MIB
+
+ lookupObjects        OBJECT IDENTIFIER ::= { lookupMIB 1 }
+ lookupConformance    OBJECT IDENTIFIER ::= { lookupMIB 2 }
+
+ -- Simple Object Definitions
+
+ lookupMaxConcurrentRequests OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "requests"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The maximum number of concurrent active lookup requests
+       that are allowed within an agent implementation.  A value
+       of 0 for this object implies that there is no limit for
+       the number of concurrent active requests in effect.
+
+       The limit applies only to new requests being activated.
+       When a new value is set, the agent will continue processing
+       all the requests already active, even if their number
+       exceed the limit just imposed."
+    DEFVAL { 10 }
+    ::= { lookupObjects 1 }
+
+ lookupPurgeTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..86400)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The amount of time to wait before automatically
+       deleting an entry in the lookupCtlTable and any
+       dependent lookupResultsTable entries
+       after the lookup operation represented by a
+       lookupCtlEntry has been completed.
+       A lookupCtEntry is considered complete
+       when its lookupCtlOperStatus object has a
+       value of completed(3).
+
+       A value of 0 indicates that automatic deletion
+       of entries is disabled."
+    DEFVAL { 900 }  -- 15 minutes as default
+    ::= { lookupObjects 2 }
+
+ -- Lookup Control Table
+
+ lookupCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LookupCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Lookup Control Table for providing
+        the capability of performing a lookup operation
+        for a symbolic host name or for a host address
+        from a remote host."
+   ::= { lookupObjects 3 }
+
+ lookupCtlEntry OBJECT-TYPE
+    SYNTAX      LookupCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the lookupCtlTable.  A
+        lookupCtlEntry is initially indexed by
+        lookupCtlOwnerIndex, which is a type of SnmpAdminString,
+        a textual convention that allows for the use of the SNMPv3
+        View-Based Access Control Model (RFC 3415, VACM)
+        and that also allows a management application to identify
+        its entries.  The second index element,
+        lookupCtlOperationName, enables the same
+        lookupCtlOwnerIndex entity to have multiple outstanding
+        requests.  The value of lookupCtlTargetAddressType
+        determines which lookup function to perform."
+    INDEX {
+             lookupCtlOwnerIndex,
+             lookupCtlOperationName
+          }
+    ::= { lookupCtlTable 1 }
+
+ LookupCtlEntry ::=
+    SEQUENCE {
+        lookupCtlOwnerIndex         SnmpAdminString,
+        lookupCtlOperationName      SnmpAdminString,
+        lookupCtlTargetAddressType  InetAddressType,
+        lookupCtlTargetAddress      InetAddress,
+        lookupCtlOperStatus         INTEGER,
+        lookupCtlTime               Unsigned32,
+        lookupCtlRc                 Integer32,
+        lookupCtlRowStatus          RowStatus
+    }
+
+ lookupCtlOwnerIndex OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "To facilitate the provisioning of access control by a
+       security administrator using the View-Based Access
+       Control Model (RFC 2575, VACM) for tables in which
+       multiple users may need to create or
+       modify entries independently, the initial index is used as
+       an 'owner index'.  Such an initial index has a syntax of
+       SnmpAdminString and can thus be trivially mapped to a
+
+       securityName or groupName defined in VACM, in
+       accordance with a security policy.
+
+       When used in conjunction with such a security policy all
+       entries in the table belonging to a particular user (or
+       group) will have the same value for this initial index.
+       For a given user's entries in a particular table, the
+       object identifiers for the information in these entries
+       will have the same subidentifiers (except for the
+       'column' subidentifier) up to the end of the encoded
+       owner index.  To configure VACM to permit access to this
+       portion of the table, one would create
+       vacmViewTreeFamilyTable entries with the value of
+       vacmViewTreeFamilySubtree including the owner index
+       portion, and vacmViewTreeFamilyMask 'wildcarding' the
+       column subidentifier.  More elaborate configurations
+       are possible."
+    ::= { lookupCtlEntry 1 }
+
+ lookupCtlOperationName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a lookup operation.  This is locally unique,
+        within the scope of an lookupCtlOwnerIndex."
+    ::= { lookupCtlEntry 2 }
+
+ lookupCtlTargetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of address for performing a
+        lookup operation for a symbolic host name or for a host
+        address from a remote host.
+
+        Specification of dns(16) as the value for this object
+        means that a function such as, for example, getaddrinfo()
+        or gethostbyname() should be performed to return one or
+        more numeric addresses.  Use of a value of either ipv4(1)
+        or ipv6(2) means that a functions such as, for example,
+        getnameinfo() or gethostbyaddr() should be used to return
+        the symbolic names associated with a host."
+    DEFVAL { unknown }
+    ::= { lookupCtlEntry 3 }
+
+ lookupCtlTargetAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the address used for a resolver lookup at a
+        remote host.  The corresponding lookupCtlTargetAddressType
+        objects determines its type, as well as the function
+        that can be requested.
+
+        A value for this object MUST be set prior to
+        transitioning its corresponding lookupCtlEntry to
+        active(1) via lookupCtlRowStatus."
+    ::= { lookupCtlEntry 4 }
+
+ lookupCtlOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   enabled(1),    -- operation is active
+                   notStarted(2), -- operation has not started
+                   completed(3)   -- operation is done
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects the operational state of an lookupCtlEntry:
+
+           enabled(1)    - Operation is active.
+           notStarted(2) - Operation has not been enabled.
+           completed(3)  - Operation has been completed.
+
+         An operation is automatically enabled(1) when its
+         lookupCtlRowStatus object is transitioned to active(1)
+         status.  Until this occurs, lookupCtlOperStatus MUST
+         report a value of notStarted(2).  After the lookup
+         operation is completed (success or failure), the value
+         for lookupCtlOperStatus MUST be transitioned to
+         completed(3)."
+    ::= { lookupCtlEntry 5 }
+
+ lookupCtlTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reports the number of milliseconds that a lookup
+        operation required to be completed at a remote host.
+        Completed means operation failure as well as
+
+        success."
+    ::= { lookupCtlEntry 6 }
+
+ lookupCtlRc OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The system-specific return code from a lookup
+        operation.  All implementations MUST return a value
+        of 0 for this object when the remote lookup
+        operation succeeds.  A non-zero value for this
+        objects indicates failure.  It is recommended that
+        implementations return the error codes that are
+        generated by the lookup function used."
+    ::= { lookupCtlEntry 7 }
+
+ lookupCtlRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the lookupCtlTable.
+
+        A remote lookup operation is started when an
+        entry in this table is created via an SNMP set
+        request and the entry is activated.  This
+        occurs by setting the value of this object
+        to CreateAndGo(4) during row creation or
+        by setting this object to active(1) after
+        the row is created.
+
+        A value MUST be specified for lookupCtlTargetAddress
+        prior to the acceptance of a transition to active(1) state.
+        A remote lookup operation starts when its entry
+        first becomes active(1).  Transitions in and
+        out of active(1) state have no effect on the
+        operational behavior of a remote lookup
+        operation, with the exception that deletion of
+        an entry in this table by setting its RowStatus
+        object to destroy(6) will stop an active
+        remote lookup operation.
+
+        The operational state of a remote lookup operation
+        can be determined by examination of its
+        lookupCtlOperStatus object."
+    REFERENCE
+        "See definition of RowStatus in RFC 2579,
+        'Textual Conventions for SMIv2.'"
+    ::= { lookupCtlEntry 8 }
+
+-- Lookup Results Table
+
+ lookupResultsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF LookupResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Lookup Results Table for providing
+        the capability of determining the results of a
+        operation at a remote host.
+
+        One or more entries are added to the
+        lookupResultsTable when a lookup operation,
+        as reflected by an lookupCtlEntry, is completed
+        successfully.  All entries related to a
+        successful lookup operation MUST be added
+        to the lookupResultsTable at the same time
+        that the associating lookupCtlOperStatus
+        object is transitioned to completed(2).
+
+        The number of entries added depends on the
+        results determined for a particular lookup
+        operation.  All entries associated with an
+        lookupCtlEntry are removed when the
+        lookupCtlEntry is deleted.
+
+        A remote host can be multi-homed and have more than one IP
+        address associated with it (returned by lookup function),
+        or it can have more than one symbolic name (returned
+        by lookup function).
+
+        A function such as, for example, getnameinfo() or
+        gethostbyaddr() is called with a host address as its
+        parameter and is used primarily to determine a symbolic
+        name to associate with the host address.  Entries in the
+        lookupResultsTable MUST be made for each host name
+        returned.  If the function identifies an 'official host
+        name,' then this symbolic name MUST be assigned a
+        lookupResultsIndex of 1.
+
+        A function such as, for example, getaddrinfo() or
+        gethostbyname() is called with a symbolic host name and is
+        used primarily to retrieve a host address.  The entries
+
+        MUST be stored in the order that they are retrieved from
+        the lookup function.  lookupResultsIndex 1 MUST be
+        assigned to the first entry."
+   ::= { lookupObjects 4 }
+
+ lookupResultsEntry OBJECT-TYPE
+    SYNTAX      LookupResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the lookupResultsTable.  The
+        first two index elements identify the
+        lookupCtlEntry that a lookupResultsEntry belongs
+        to.  The third index element selects a single
+        lookup operation result."
+    INDEX {
+             lookupCtlOwnerIndex,
+             lookupCtlOperationName,
+             lookupResultsIndex
+          }
+    ::= { lookupResultsTable 1 }
+
+ LookupResultsEntry ::=
+    SEQUENCE {
+        lookupResultsIndex        Unsigned32,
+        lookupResultsAddressType  InetAddressType,
+        lookupResultsAddress      InetAddress
+     }
+
+ lookupResultsIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Entries in the lookupResultsTable are created when
+        the result of a lookup operation is determined.
+
+        Entries MUST be stored in the lookupResultsTable in
+        the order that they are retrieved.  Values assigned
+        to lookupResultsIndex MUST start at 1 and increase
+        consecutively."
+    ::= { lookupResultsEntry 1 }
+
+ lookupResultsAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of result of a remote lookup
+        operation.  A value of unknown(0) implies either that
+        the operation hasn't been started or that
+        it has failed."
+    ::= { lookupResultsEntry 2 }
+
+ lookupResultsAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects a result for a remote lookup operation
+        as per the value of lookupResultsAddressType.
+
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of lookupResultsAddress."
+    ::= { lookupResultsEntry 3 }
+
+ -- Conformance information
+ -- Compliance statements
+
+ lookupCompliances OBJECT IDENTIFIER ::= { lookupConformance 1 }
+ lookupGroups      OBJECT IDENTIFIER ::= { lookupConformance 2 }
+
+ -- Compliance statements
+
+ lookupCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities that
+            fully implement the DISMAN-NSLOOKUP-MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { lookupGroup }
+
+        OBJECT lookupMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT lookupPurgeTime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a set
+            operation to this object."
+    ::= { lookupCompliances 1 }
+
+ lookupMinimumCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The minimum compliance statement for SNMP entities
+            that implement the minimal subset of the
+            DISMAN-NSLOOKUP-MIB.  Implementors might choose this
+            subset for small devices with limited resources."
+    MODULE  -- this module
+        MANDATORY-GROUPS { lookupGroup }
+
+        OBJECT lookupMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT lookupPurgeTime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a set
+            operation to this object."
+
+        OBJECT lookupCtlRowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, then at least one entry in the
+            lookupCtlTable MUST be established already when the SNMP
+            agent starts offering access to the NSLOOKUP-MIB module.
+            If, in such a case, only a single entry is offered, then
+            it is RECOMMENDED that this entry use strings with a
+            length of 0 for both of its two index objects."
+    ::= { lookupCompliances 2 }
+
+ -- MIB groupings
+
+ lookupGroup OBJECT-GROUP
+   OBJECTS {
+             lookupMaxConcurrentRequests,
+             lookupPurgeTime,
+             lookupCtlOperStatus,
+             lookupCtlTargetAddressType,
+             lookupCtlTargetAddress,
+             lookupCtlTime,
+             lookupCtlRc,
+             lookupCtlRowStatus,
+             lookupResultsAddressType,
+             lookupResultsAddress
+           }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the remote
+       Lookup operation."
+    ::= { lookupGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-PING-MIB.mib b/snmp_builder/mibs/DISMAN-PING-MIB.mib
new file mode 100644
index 0000000..645ff8c
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-PING-MIB.mib
@@ -0,0 +1,1561 @@
+DISMAN-PING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+    Unsigned32, Gauge32, mib-2,
+    NOTIFICATION-TYPE, OBJECT-IDENTITY
+        FROM SNMPv2-SMI                  -- RFC2578
+    TEXTUAL-CONVENTION, RowStatus,
+    StorageType, DateAndTime, TruthValue
+        FROM SNMPv2-TC                   -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- RFC2580
+    InterfaceIndexOrZero                 -- RFC2863
+        FROM IF-MIB
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- RFC3411
+    InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB;           -- RFC4001
+
+ pingMIB MODULE-IDENTITY
+    LAST-UPDATED "200606130000Z"         -- 13 June 2006
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO
+        "Juergen Quittek
+
+        NEC Europe Ltd.
+        Network Laboratories
+        Kurfuersten-Anlage 36
+        69115 Heidelberg
+        Germany
+
+        Phone: +49 6221 4342-115
+
+        Email: quittek@netlab.nec.de"
+    DESCRIPTION
+        "The Ping MIB (DISMAN-PING-MIB) provides the capability of
+        controlling the use of the ping function at a remote
+        host.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4560; see the RFC itself for
+        full legal notices."
+
+     --  Revision history
+
+     REVISION     "200606130000Z"         -- 13 June 2006
+     DESCRIPTION
+         "Updated version, published as RFC 4560.
+             - Correctly considered IPv6 in DESCRIPTION
+               clause of pingCtlDataSize
+             - Replaced references to RFC 2575 by RFC 3415
+             - Replaced references to RFC 2571 by RFC 3411
+             - Replaced references to RFC 2851 by RFC 4001
+             - Added DEFVAL { {} } to definition of
+               pingCtlTrapGeneration
+             - Changed DEFVAL of object pingCtlDescr from
+               DEFVAL { '00'H } to DEFVAL { ''H }
+             - Changed DEFVAL of object pingCtlSourceAddressType
+               from DEFVAL { ipv4 } to DEFVAL { unknown }
+             - Extended DESCRIPTION clause of pingResultsTable
+               describing re-initialization of entries
+             - Changed SYNTAX of pingResultsProbeResponses and
+               pingResultsSentProbes from Unsigned32 to Gauge32
+             - Changed status of pingCompliance to deprecated
+             - Added pingFullCompliance and pingMinimumCompliance
+             - Changed status of pingGroup and pingTimeStampGroup
+               to deprecated
+             - Added pingMinimumGroup, pingCtlRowStatusGroup,
+               and pingHistoryGroup"
+
+     REVISION     "200009210000Z"         -- 21 September 2000
+     DESCRIPTION
+         "Initial version, published as RFC 2925."
+    ::= { mib-2 80 }
+
+ -- Textual Conventions
+
+  OperationResponseStatus ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Used to report the result of an operation:
+
+         responseReceived(1) - Operation is completed successfully.
+         unknown(2) - Operation failed due to unknown error.
+         internalError(3) - An implementation detected an error
+              in its own processing that caused an operation
+              to fail.
+         requestTimedOut(4) - Operation failed to receive a
+              valid reply within the time limit imposed on it.
+         unknownDestinationAddress(5) - Invalid destination
+              address.
+         noRouteToTarget(6) - Could not find a route to target.
+         interfaceInactiveToTarget(7) - The interface to be
+              used in sending a probe is inactive, and an
+              alternate route does not exist.
+         arpFailure(8) - Unable to resolve a target address to a
+              media-specific address.
+         maxConcurrentLimitReached(9) - The maximum number of
+              concurrent active operations would have been exceeded
+              if the corresponding operation was allowed.
+         unableToResolveDnsName(10) - The DNS name specified was
+              unable to be mapped to an IP address.
+         invalidHostAddress(11) - The IP address for a host
+              has been determined to be invalid.  Examples of this
+              are broadcast or multicast addresses."
+    SYNTAX INTEGER {
+                 responseReceived(1),
+                 unknown(2),
+                 internalError(3),
+                 requestTimedOut(4),
+                 unknownDestinationAddress(5),
+                 noRouteToTarget(6),
+                 interfaceInactiveToTarget(7),
+                 arpFailure(8),
+                 maxConcurrentLimitReached(9),
+                 unableToResolveDnsName(10),
+                 invalidHostAddress(11)
+              }
+
+ -- Top level structure of the MIB
+
+ pingNotifications              OBJECT IDENTIFIER ::= { pingMIB 0 }
+ pingObjects                    OBJECT IDENTIFIER ::= { pingMIB 1 }
+ pingConformance                OBJECT IDENTIFIER ::= { pingMIB 2 }
+
+ -- The registration node (point) for ping implementation types
+
+ pingImplementationTypeDomains  OBJECT IDENTIFIER ::= { pingMIB 3 }
+
+ pingIcmpEcho OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using the Internet
+        Control Message Protocol (ICMP) 'ECHO' facility."
+    ::= { pingImplementationTypeDomains 1 }
+
+ pingUdpEcho OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using the UDP echo
+        port (7)."
+    REFERENCE
+        "RFC 862, 'Echo Protocol'."
+    ::= { pingImplementationTypeDomains 2 }
+
+ pingSnmpQuery OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using an SNMP query
+         to calculate a round trip time."
+    ::= { pingImplementationTypeDomains 3 }
+
+ pingTcpConnectionAttempt OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is attempting to
+        connect to a TCP port in order to calculate a round
+        trip time."
+    ::= { pingImplementationTypeDomains 4 }
+
+ -- Simple Object Definitions
+
+ pingMaxConcurrentRequests OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "requests"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The maximum number of concurrent active ping requests
+       that are allowed within an agent implementation.  A value
+       of 0 for this object implies that there is no limit for
+       the number of concurrent active requests in effect.
+
+       The limit applies only to new requests being activated.
+       When a new value is set, the agent will continue processing
+       all the requests already active, even if their number
+       exceeds the limit just imposed."
+    DEFVAL { 10 }
+    ::= { pingObjects 1 }
+
+ -- Ping Control Table
+
+ pingCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PingCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the ping Control Table for providing, via SNMP,
+        the capability of performing ping operations at
+        a remote host.  The results of these operations are
+        stored in the pingResultsTable and the
+        pingProbeHistoryTable."
+   ::= { pingObjects 2 }
+
+ pingCtlEntry OBJECT-TYPE
+    SYNTAX      PingCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the pingCtlTable.  The first index
+        element, pingCtlOwnerIndex, is of type SnmpAdminString,
+        a textual convention that allows for use of the SNMPv3
+        View-Based Access Control Model (RFC 3415, VACM)
+        and that allows a management application to identify its
+        entries.  The second index, pingCtlTestName (also an
+        SnmpAdminString), enables the same management
+        application to have multiple outstanding requests."
+    INDEX {
+             pingCtlOwnerIndex,
+             pingCtlTestName
+          }
+    ::= { pingCtlTable 1 }
+
+ PingCtlEntry ::=
+    SEQUENCE {
+        pingCtlOwnerIndex             SnmpAdminString,
+        pingCtlTestName               SnmpAdminString,
+        pingCtlTargetAddressType      InetAddressType,
+        pingCtlTargetAddress          InetAddress,
+        pingCtlDataSize               Unsigned32,
+        pingCtlTimeOut                Unsigned32,
+        pingCtlProbeCount             Unsigned32,
+        pingCtlAdminStatus            INTEGER,
+        pingCtlDataFill               OCTET STRING,
+        pingCtlFrequency              Unsigned32,
+        pingCtlMaxRows                Unsigned32,
+        pingCtlStorageType            StorageType,
+        pingCtlTrapGeneration         BITS,
+        pingCtlTrapProbeFailureFilter Unsigned32,
+        pingCtlTrapTestFailureFilter  Unsigned32,
+        pingCtlType                   OBJECT IDENTIFIER,
+        pingCtlDescr                  SnmpAdminString,
+        pingCtlSourceAddressType      InetAddressType,
+        pingCtlSourceAddress          InetAddress,
+        pingCtlIfIndex                InterfaceIndexOrZero,
+        pingCtlByPassRouteTable       TruthValue,
+        pingCtlDSField                Unsigned32,
+        pingCtlRowStatus              RowStatus
+    }
+
+ pingCtlOwnerIndex OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "To facilitate the provisioning of access control by a
+       security administrator using the View-Based Access
+       Control Model (RFC 2575, VACM) for tables in which
+       multiple users may need to create or
+       modify entries independently, the initial index is used
+       as an 'owner index'.  Such an initial index has a syntax
+       of SnmpAdminString and can thus be trivially mapped to a
+       securityName or groupName defined in VACM, in
+       accordance with a security policy.
+
+       When used in conjunction with such a security policy, all
+       entries in the table belonging to a particular user (or
+       group) will have the same value for this initial index.
+       For a given user's entries in a particular table, the
+       object identifiers for the information in these entries
+       will have the same subidentifiers (except for the 'column'
+       subidentifier) up to the end of the encoded owner index.
+       To configure VACM to permit access to this portion of the
+       table, one would create vacmViewTreeFamilyTable entries
+       with the value of vacmViewTreeFamilySubtree including
+       the owner index portion, and vacmViewTreeFamilyMask
+       'wildcarding' the column subidentifier.  More elaborate
+       configurations are possible."
+    ::= { pingCtlEntry 1 }
+
+ pingCtlTestName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of the ping test.  This is locally unique, within
+        the scope of a pingCtlOwnerIndex."
+    ::= { pingCtlEntry 2 }
+
+ pingCtlTargetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of host address to be used at a remote
+        host for performing a ping operation."
+    DEFVAL { unknown }
+    ::= { pingCtlEntry 3 }
+
+ pingCtlTargetAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the host address to be used at a remote host for
+        performing a ping operation.  The host address type is
+        determined by the value of the corresponding
+        pingCtlTargetAddressType.
+
+        A value for this object MUST be set prior to transitioning
+        its corresponding pingCtlEntry to active(1) via
+        pingCtlRowStatus."
+    DEFVAL { ''H }
+    ::= { pingCtlEntry 4 }
+
+ pingCtlDataSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65507)
+    UNITS       "octets"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the size of the data portion to be
+        transmitted in a ping operation, in octets.  Whether this
+        value can be applied depends on the selected
+        implementation method for performing a ping operation,
+        indicated by pingCtlType in the same conceptual row.
+        If the method used allows applying the value contained
+
+        in this object, then it MUST be applied.  If the specified
+        size is not appropriate for the chosen ping method, the
+        implementation SHOULD use whatever size (appropriate to
+        the method) is closest to the specified size.
+
+        The maximum value for this object was computed by
+        subtracting the smallest possible IP header size of
+        20 octets (IPv4 header with no options) and the UDP
+        header size of 8 octets from the maximum IP packet size.
+        An IP packet has a maximum size of 65535 octets
+        (excluding IPv6 Jumbograms)."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 5 }
+
+ pingCtlTimeOut OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the time-out value, in seconds, for a
+        remote ping operation."
+    DEFVAL { 3 }
+    ::= { pingCtlEntry 6 }
+
+ pingCtlProbeCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..15)
+    UNITS       "probes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the number of times to perform a ping
+        operation at a remote host as part of a single ping test."
+    DEFVAL { 1 }
+    ::= { pingCtlEntry 7 }
+
+ pingCtlAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          enabled(1), -- test should be started
+                          disabled(2) -- test should be stopped
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Reflects the desired state that a pingCtlEntry should be
+        in:
+
+           enabled(1)  - Attempt to activate the test as defined by
+                         this pingCtlEntry.
+           disabled(2) - Deactivate the test as defined by this
+                         pingCtlEntry.
+
+        Refer to the corresponding pingResultsOperStatus to
+        determine the operational state of the test defined by
+        this entry."
+     DEFVAL { disabled }
+    ::= { pingCtlEntry 8 }
+
+ pingCtlDataFill  OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The content of this object is used together with the
+        corresponding pingCtlDataSize value to determine how to
+        fill the data portion of a probe packet.  The option of
+        selecting a data fill pattern can be useful when links
+        are compressed or have data pattern sensitivities.  The
+        contents of pingCtlDataFill should be repeated in a ping
+        packet when the size of the data portion of the ping
+        packet is greater than the size of pingCtlDataFill."
+    DEFVAL { '00'H }
+    ::= { pingCtlEntry 9 }
+
+ pingCtlFrequency  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of seconds to wait before repeating a ping test
+        as defined by the value of the various objects in the
+        corresponding row.
+
+        A single ping test consists of a series of ping probes.
+        The number of probes is determined by the value of the
+        corresponding pingCtlProbeCount object.  After a single
+        test is completed the number of seconds as defined by the
+        value of pingCtlFrequency MUST elapse before the
+        next ping test is started.
+
+        A value of 0 for this object implies that the test
+        as defined by the corresponding entry will not be
+        repeated."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 10 }
+
+ pingCtlMaxRows OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "rows"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of corresponding entries allowed
+        in the pingProbeHistoryTable.  An implementation of this
+        MIB will remove the oldest corresponding entry in the
+        pingProbeHistoryTable to allow the addition of an
+        new entry once the number of corresponding rows in the
+        pingProbeHistoryTable reaches this value.
+
+        Old entries are not removed when a new test is
+        started.  Entries are added to the pingProbeHistoryTable
+        until pingCtlMaxRows is reached before entries begin to
+        be removed.
+
+        A value of 0 for this object disables creation of
+        pingProbeHistoryTable entries."
+    DEFVAL      { 50 }
+    ::= { pingCtlEntry 11 }
+
+ pingCtlStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { pingCtlEntry 12 }
+
+ pingCtlTrapGeneration OBJECT-TYPE
+    SYNTAX      BITS {
+                   probeFailure(0),
+                   testFailure(1),
+                   testCompletion(2)
+                  }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object determines when and whether
+        to generate a notification for this entry:
+
+        probeFailure(0)   - Generate a pingProbeFailed
+            notification subject to the value of
+            pingCtlTrapProbeFailureFilter.  The object
+            pingCtlTrapProbeFailureFilter can be used
+            to specify the number of consecutive probe
+            failures that are required before a
+            pingProbeFailed notification can be generated.
+        testFailure(1)    - Generate a pingTestFailed
+            notification.  In this instance the object
+            pingCtlTrapTestFailureFilter can be used to
+            determine the number of probe failures that
+            signal when a test fails.
+        testCompletion(2) - Generate a pingTestCompleted
+            notification.
+
+        By default, no bits are set, indicating that
+        none of the above options is selected."
+    DEFVAL { {} }  -- no bits set.
+    ::= { pingCtlEntry 13 }
+
+ pingCtlTrapProbeFailureFilter OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..15)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used to determine when
+        to generate a pingProbeFailed NOTIFICATION.
+
+        Setting BIT probeFailure(0) of object
+        pingCtlTrapGeneration to '1' implies that a
+        pingProbeFailed NOTIFICATION is generated only when
+
+        a number of consecutive ping probes equal to the
+        value of pingCtlTrapProbeFailureFilter fail within
+        a given ping test.  After triggering the notification,
+        the probe failure counter is reset to zero."
+    DEFVAL { 1 }
+    ::= { pingCtlEntry 14 }
+
+ pingCtlTrapTestFailureFilter OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..15)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used to determine when
+        to generate a pingTestFailed NOTIFICATION.
+
+        Setting BIT testFailure(1) of object
+
+        pingCtlTrapGeneration to '1' implies that a
+        pingTestFailed NOTIFICATION is generated only when
+        a number of consecutive ping tests equal to the
+        value of pingCtlTrapProbeFailureFilter fail.
+        After triggering the notification, the test failure
+        counter is reset to zero."
+    DEFVAL { 1 }
+    ::= { pingCtlEntry 15 }
+
+ pingCtlType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used either to report or
+        to select the implementation method to be used for
+        calculating a ping response time.  The value of this
+        object MAY be selected from pingImplementationTypeDomains.
+
+        Additional implementation types SHOULD be allocated as
+        required by implementers of the DISMAN-PING-MIB under
+        their enterprise-specific registration point and not
+        beneath pingImplementationTypeDomains."
+    DEFVAL { pingIcmpEcho }
+    ::= { pingCtlEntry 16 }
+
+ pingCtlDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The purpose of this object is to provide a
+        descriptive name of the remote ping test."
+    DEFVAL { ''H }
+    ::= { pingCtlEntry 17 }
+
+ pingCtlSourceAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of the source address,
+        pingCtlSourceAddress, to be used at a remote host
+        when a ping operation is performed."
+    DEFVAL { unknown }
+    ::= { pingCtlEntry 18 }
+
+  pingCtlSourceAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Use the specified IP address (which must be given in
+        numeric form, not as a hostname) as the source address
+        in outgoing probe packets.  On hosts with more than one
+        IP address, this option can be used to select the address
+        to be used.  If the IP address is not one of this
+        machine's interface addresses, an error is returned and
+        nothing is sent.  A zero-length octet string value for
+        this object disables source address specification.
+
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of pingCtlSourceAddressType."
+    DEFVAL { ''H }
+    ::= { pingCtlEntry 19 }
+
+ pingCtlIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Setting this object to an interface's ifIndex prior
+        to starting a remote ping operation directs
+        the ping probes to be transmitted over the
+        specified interface.  A value of zero for this object
+        means that this option is not enabled."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 20 }
+
+ pingCtlByPassRouteTable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The purpose of this object is to enable optional
+       bypassing the route table.  If enabled, the remote
+       host will bypass the normal routing tables and send
+       directly to a host on an attached network.  If the
+       host is not on a directly attached network, an
+       error is returned.  This option can be used to perform
+       the ping operation to a local host through an
+       interface that has no route defined (e.g., after the
+       interface was dropped by the routing daemon at the host)."
+    DEFVAL { false }
+    ::= { pingCtlEntry 21 }
+
+ pingCtlDSField OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the value to store in the Type of Service
+        (TOS) octet in the IPv4 header or in the Traffic
+        Class octet in the IPv6 header, respectively, of the
+        IP packet used to encapsulate the ping probe.
+
+        The octet to be set in the IP header contains the
+        Differentiated Services (DS) Field in the six most
+        significant bits.
+
+        This option can be used to determine what effect an
+        explicit DS Field setting has on a ping response.
+        Not all values are legal or meaningful.  A value of 0
+        means that the function represented by this option is
+        not supported.  DS Field usage is often not supported
+        by IP implementations, and not all values are supported.
+        Refer to RFC 2474 and RFC 3260 for guidance on usage of
+        this field."
+    REFERENCE
+        "Refer to RFC 1812 for the definition of the IPv4 TOS
+        octet and to RFC 2460 for the definition of the IPv6
+        Traffic Class octet.  Refer to RFC 2474 and RFC 3260
+        for the definition of the Differentiated Services Field."
+    DEFVAL { 0 }
+    ::= { pingCtlEntry 22 }
+
+ pingCtlRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the pingCtlTable.  Deletion of an entry in this
+        table results in the deletion of all corresponding (same
+        pingCtlOwnerIndex and pingCtlTestName index values)
+        pingResultsTable and pingProbeHistoryTable entries.
+
+        A value MUST be specified for pingCtlTargetAddress
+        prior to acceptance of a transition to active(1) state.
+
+        When a value for pingCtlTargetAddress is set,
+        the value of object pingCtlRowStatus changes
+        from notReady(3) to notInService(2).
+
+        Activation of a remote ping operation is controlled
+        via pingCtlAdminStatus, not by changing
+        this object's value to active(1).
+
+        Transitions in and out of active(1) state are not
+        allowed while an entry's pingResultsOperStatus is
+        active(1), with the exception that deletion of
+        an entry in this table by setting its RowStatus
+        object to destroy(6) will stop an active
+        ping operation.
+
+        The operational state of a ping operation
+        can be determined by examination of its
+        pingResultsOperStatus object."
+    REFERENCE
+        "See definition of RowStatus in RFC 2579, 'Textual
+        Conventions for SMIv2.'"
+    ::= { pingCtlEntry 23 }
+
+-- Ping Results Table
+
+ pingResultsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PingResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Ping Results Table for providing
+        the capability of performing ping operations at
+        a remote host.  The results of these operations are
+        stored in the pingResultsTable and the pingProbeHistoryTable.
+
+        An entry is added to the pingResultsTable when an
+        pingCtlEntry is started by successful transition
+        of its pingCtlAdminStatus object to enabled(1).
+
+        If the object pingCtlAdminStatus already has the value
+        enabled(1), and if the corresponding pingResultsOperStatus
+        object has the value completed(3), then successfully writing
+        enabled(1) to object pingCtlAdminStatus re-initializes the
+        already existing entry in the pingResultsTable.  The values
+        of objects in the re-initialized entry are the same as the
+        values of objects in a new entry would be.
+
+        An entry is removed from the pingResultsTable when
+        its corresponding pingCtlEntry is deleted."
+   ::= { pingObjects 3 }
+
+ pingResultsEntry OBJECT-TYPE
+    SYNTAX      PingResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the pingResultsTable.  The
+        pingResultsTable has the same indexing as the
+        pingCtlTable so that a pingResultsEntry
+        corresponds to the pingCtlEntry that caused it to
+        be created."
+    INDEX {
+             pingCtlOwnerIndex,
+             pingCtlTestName
+          }
+    ::= { pingResultsTable 1 }
+
+ PingResultsEntry ::=
+    SEQUENCE {
+        pingResultsOperStatus          INTEGER,
+        pingResultsIpTargetAddressType InetAddressType,
+        pingResultsIpTargetAddress     InetAddress,
+        pingResultsMinRtt              Unsigned32,
+        pingResultsMaxRtt              Unsigned32,
+        pingResultsAverageRtt          Unsigned32,
+        pingResultsProbeResponses      Gauge32,
+        pingResultsSentProbes          Gauge32,
+        pingResultsRttSumOfSquares     Unsigned32,
+        pingResultsLastGoodProbe       DateAndTime
+     }
+
+ pingResultsOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          enabled(1),   -- test is in progress
+                          disabled(2),  -- test has stopped
+                          completed(3)  -- test is completed
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects the operational state of a pingCtlEntry:
+
+           enabled(1)    - Test is active.
+           disabled(2)   - Test has stopped.
+           completed(3)  - Test is completed."
+    ::= { pingResultsEntry 1 }
+
+ pingResultsIpTargetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the type of address stored
+        in the corresponding pingResultsIpTargetAddress
+        object."
+    DEFVAL { unknown }
+    ::= { pingResultsEntry 2 }
+
+ pingResultsIpTargetAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object reports the IP address associated
+        with a pingCtlTargetAddress value when the destination
+        address is specified as a DNS name.  The value of
+        this object should be a zero-length octet string
+        when a DNS name is not specified or when a
+        specified DNS name fails to resolve.
+
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of pingResultsIpTargetAddressType."
+    DEFVAL { ''H }
+    ::= { pingResultsEntry 3 }
+
+ pingResultsMinRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The minimum ping round-trip-time (RTT) received.  A value
+        of 0 for this object implies that no RTT has been received."
+    ::= { pingResultsEntry 4 }
+
+ pingResultsMaxRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum ping round-trip-time (RTT) received.  A value
+        of 0 for this object implies that no RTT has been received."
+    ::= { pingResultsEntry 5 }
+
+  pingResultsAverageRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current average ping round-trip-time (RTT)."
+    ::= { pingResultsEntry 6 }
+
+  pingResultsProbeResponses OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "responses"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of responses received for the corresponding
+        pingCtlEntry and pingResultsEntry.  The value of this object
+        MUST be reported as 0 when no probe responses have been
+        received."
+    ::= { pingResultsEntry 7 }
+
+  pingResultsSentProbes OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "probes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object reflects the number of probes sent
+        for the corresponding pingCtlEntry and pingResultsEntry.
+        The value of this object MUST be reported as 0 when no probes
+        have been sent."
+    ::= { pingResultsEntry 8 }
+
+  pingResultsRttSumOfSquares OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the sum of the squares for all ping
+        responses received.  Its purpose is to enable standard
+        deviation calculation.  The value of this object MUST
+        be reported as 0 when no ping responses have been
+        received."
+    ::= { pingResultsEntry 9 }
+
+ pingResultsLastGoodProbe OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Date and time when the last response was received for
+        a probe."
+    ::= { pingResultsEntry 10 }
+
+ -- Ping Probe History Table
+
+ pingProbeHistoryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PingProbeHistoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a table for storing the results of ping
+        operations.  The number of entries in this table is
+        limited per entry in the pingCtlTable by the value
+        of the corresponding pingCtlMaxRows object.
+
+        An entry in this table is created when the result of
+        a ping probe is determined.  The initial 2 instance
+        identifier index values identify the pingCtlEntry
+        that a probe result (pingProbeHistoryEntry) belongs
+        to.  An entry is removed from this table when
+        its corresponding pingCtlEntry is deleted.
+
+        An implementation of this MIB will remove the oldest
+        entry in the pingProbeHistoryTable of the
+        corresponding entry in the pingCtlTable to allow
+        the addition of an new entry once the number of rows
+        in the pingProbeHistoryTable reaches the value
+        specified by pingCtlMaxRows for the corresponding
+        entry in the pingCtlTable."
+   ::= { pingObjects 4 }
+
+ pingProbeHistoryEntry OBJECT-TYPE
+    SYNTAX      PingProbeHistoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the pingProbeHistoryTable.
+        The first two index elements identify the
+        pingCtlEntry that a pingProbeHistoryEntry belongs
+        to.  The third index element selects a single
+        probe result."
+    INDEX {
+
+             pingCtlOwnerIndex,
+             pingCtlTestName,
+             pingProbeHistoryIndex
+           }
+    ::= { pingProbeHistoryTable 1 }
+
+ PingProbeHistoryEntry ::=
+    SEQUENCE {
+        pingProbeHistoryIndex         Unsigned32,
+        pingProbeHistoryResponse      Unsigned32,
+        pingProbeHistoryStatus        OperationResponseStatus,
+        pingProbeHistoryLastRC        Integer32,
+        pingProbeHistoryTime          DateAndTime
+    }
+
+ pingProbeHistoryIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table is created when the result of
+        a ping probe is determined.  The initial 2 instance
+        identifier index values identify the pingCtlEntry
+        that a probe result (pingProbeHistoryEntry) belongs
+        to.
+
+        An implementation MUST start assigning
+        pingProbeHistoryIndex values at 1 and wrap after
+        exceeding the maximum possible value as defined by
+        the limit of this object ('ffffffff'h)."
+    ::= { pingProbeHistoryEntry 1 }
+
+ pingProbeHistoryResponse OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The amount of time measured in milliseconds from when
+        a probe was sent to when its response was received or
+        when it timed out.  The value of this object is reported
+        as 0 when it is not possible to transmit a probe."
+    ::= { pingProbeHistoryEntry 2 }
+
+ pingProbeHistoryStatus OBJECT-TYPE
+    SYNTAX      OperationResponseStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The result of a particular probe done by a remote host."
+    ::= { pingProbeHistoryEntry 3 }
+
+ pingProbeHistoryLastRC        OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last implementation-method-specific reply code received.
+        If the ICMP Echo capability is being used, then a successful
+        probe ends when an ICMP response is received that contains
+        the code ICMP_ECHOREPLY(0).  The ICMP codes are maintained
+        by IANA.  Standardized ICMP codes are listed at
+        http://www.iana.org/assignments/icmp-parameters.
+        The ICMPv6 codes are listed at
+        http://www.iana.org/assignments/icmpv6-parameters."
+    ::= { pingProbeHistoryEntry 4 }
+
+ pingProbeHistoryTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Timestamp for when this probe result was determined."
+    ::= { pingProbeHistoryEntry 5 }
+
+ -- Notification Definition section
+
+ pingProbeFailed NOTIFICATION-TYPE
+      OBJECTS {
+        pingCtlTargetAddressType,
+        pingCtlTargetAddress,
+        pingResultsOperStatus,
+        pingResultsIpTargetAddressType,
+        pingResultsIpTargetAddress,
+        pingResultsMinRtt,
+        pingResultsMaxRtt,
+        pingResultsAverageRtt,
+        pingResultsProbeResponses,
+        pingResultsSentProbes,
+        pingResultsRttSumOfSquares,
+        pingResultsLastGoodProbe
+      }
+      STATUS  current
+      DESCRIPTION
+          "Generated when a probe failure is detected, when the
+
+          corresponding pingCtlTrapGeneration object is set to
+          probeFailure(0), subject to the value of
+          pingCtlTrapProbeFailureFilter.  The object
+          pingCtlTrapProbeFailureFilter can be used to specify the
+          number of consecutive probe failures that are required
+          before this notification can be generated."
+      ::= { pingNotifications 1 }
+
+ pingTestFailed NOTIFICATION-TYPE
+      OBJECTS {
+        pingCtlTargetAddressType,
+        pingCtlTargetAddress,
+        pingResultsOperStatus,
+        pingResultsIpTargetAddressType,
+        pingResultsIpTargetAddress,
+        pingResultsMinRtt,
+        pingResultsMaxRtt,
+        pingResultsAverageRtt,
+        pingResultsProbeResponses,
+        pingResultsSentProbes,
+        pingResultsRttSumOfSquares,
+        pingResultsLastGoodProbe
+      }
+      STATUS  current
+      DESCRIPTION
+          "Generated when a ping test is determined to have failed,
+          when the corresponding pingCtlTrapGeneration object is
+          set to testFailure(1).  In this instance,
+          pingCtlTrapTestFailureFilter should specify the number of
+          probes in a test required to have failed in order to
+          consider the test failed."
+      ::= { pingNotifications 2 }
+
+ pingTestCompleted NOTIFICATION-TYPE
+      OBJECTS {
+        pingCtlTargetAddressType,
+        pingCtlTargetAddress,
+        pingResultsOperStatus,
+        pingResultsIpTargetAddressType,
+        pingResultsIpTargetAddress,
+        pingResultsMinRtt,
+        pingResultsMaxRtt,
+        pingResultsAverageRtt,
+        pingResultsProbeResponses,
+        pingResultsSentProbes,
+        pingResultsRttSumOfSquares,
+        pingResultsLastGoodProbe
+
+      }
+      STATUS  current
+      DESCRIPTION
+          "Generated at the completion of a ping test when the
+          corresponding pingCtlTrapGeneration object has the
+          testCompletion(2) bit set."
+      ::= { pingNotifications 3 }
+
+ -- Conformance information
+
+ -- Compliance statements
+
+ pingCompliances OBJECT IDENTIFIER ::= { pingConformance 1 }
+ pingGroups      OBJECT IDENTIFIER ::= { pingConformance 2 }
+
+ -- Compliance statements
+
+ pingFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities that
+            fully implement the DISMAN-PING-MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                            pingMinimumGroup,
+                            pingCtlRowStatusGroup,
+                            pingHistoryGroup,
+                            pingNotificationsGroup
+                          }
+
+        OBJECT pingMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT pingCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that MUST be supported by an implementation is
+            pingIcmpEcho."
+
+        OBJECT pingCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of its
+            implementation.  The function represented by this
+            object is implementable if the setsockopt
+            SOL_SOCKET SO_DONTROUTE option is supported."
+
+        OBJECT pingCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingResultsIpTargetAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation is only required to
+
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingResultsIpTargetAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT pingResultsLastGoodProbe
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT pingProbeHistoryTime
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+    ::= { pingCompliances 2 }
+
+ pingMinimumCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The minimum compliance statement for SNMP entities
+            that implement the minimal subset of the
+            DISMAN-PING-MIB.  Implementors might choose this
+            subset for small devices with limited resources."
+    MODULE  -- this module
+        MANDATORY-GROUPS { pingMinimumGroup }
+
+        GROUP pingCtlRowStatusGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+            the pingCtlRowStatusGroup."
+
+        GROUP pingHistoryGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+            the pingHistoryGroup."
+
+        GROUP pingNotificationsGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+
+            the pingNotificationsGroup."
+
+        OBJECT pingMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlDataFill
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlFrequency
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlMaxRows
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            pingHistoryGroup is not implemented, then write
+            access to this object MUST be disabled, and the object
+            MUST return a value of 0 when retrieved."
+
+        OBJECT pingCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT pingCtlTrapGeneration
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            pingNotificationsGroup is not implemented, then write
+            access to this object MUST be disabled, and the object
+            MUST return a value with no bit set when retrieved.
+            No bit set indicates that not notification is
+            generated."
+
+        OBJECT pingCtlTrapProbeFailureFilter
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "If write access to pingCtlTrapGeneration is not
+            supported, then write access to this object must also
+            not be supported.  In this case, return 0 as the value
+            of this object."
+
+        OBJECT pingCtlTrapTestFailureFilter
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "If write access to pingCtlTrapGeneration is not
+            supported, then write access to this object must also
+            not be supported.  In this case, return 0 as the value
+            of this object."
+
+        OBJECT pingCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that MUST be supported by an implementation is
+            pingIcmpEcho."
+
+        OBJECT pingCtlDescr
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return false(2) as the value of this
+            object.  A value of false(2) means that the function
+            represented by this option is not supported."
+
+        OBJECT pingCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingResultsIpTargetAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingResultsIpTargetAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT pingResultsLastGoodProbe
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT pingProbeHistoryTime
+        DESCRIPTION
+            "If the pingHistoryGroup is implemented, then this
+            object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+
+            be reported as '0000000000000000'H."
+    ::= { pingCompliances 3 }
+
+ pingCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for the DISMAN-PING-MIB.  This
+            compliance statement has been deprecated because the
+            group pingGroup and the pingTimeStampGroup have been
+            split and deprecated.  The pingFullCompliance statement
+            is semantically identical to the deprecated
+            pingCompliance statement."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                            pingGroup,
+                            pingNotificationsGroup
+                          }
+        GROUP pingTimeStampGroup
+        DESCRIPTION
+            "This group is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this group is not supported the values
+            for the objects in this group be reported as
+            '0000000000000000'H."
+
+        OBJECT pingMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT pingCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  It is also allowed
+            that implementations support only the volatile
+            StorageType enumeration."
+
+        OBJECT pingCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that MUST be supported by an implementation is
+            pingIcmpEcho."
+
+        OBJECT pingCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of its implementation.  The function
+            represented by this object is implementable if the
+            setsockopt SOL_SOCKET SO_DONTROUTE option is
+            supported."
+
+        OBJECT pingCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of binding the send socket with a
+            source address.  An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of binding the send socket with a
+            source address.  An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT pingCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  When write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  When write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 means that the function represented by
+            this option is not supported."
+
+        OBJECT pingResultsIpTargetAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT pingResultsIpTargetAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+    ::= { pingCompliances 1 }
+
+ -- MIB groupings
+
+ pingMinimumGroup OBJECT-GROUP
+   OBJECTS {
+             pingMaxConcurrentRequests,
+             pingCtlTargetAddressType,
+             pingCtlTargetAddress,
+             pingCtlDataSize,
+             pingCtlTimeOut,
+             pingCtlProbeCount,
+             pingCtlAdminStatus,
+             pingCtlDataFill,
+             pingCtlFrequency,
+             pingCtlMaxRows,
+             pingCtlStorageType,
+             pingCtlTrapGeneration,
+             pingCtlTrapProbeFailureFilter,
+             pingCtlTrapTestFailureFilter,
+             pingCtlType,
+             pingCtlDescr,
+             pingCtlByPassRouteTable,
+             pingCtlSourceAddressType,
+             pingCtlSourceAddress,
+             pingCtlIfIndex,
+             pingCtlDSField,
+             pingResultsOperStatus,
+             pingResultsIpTargetAddressType,
+             pingResultsIpTargetAddress,
+             pingResultsMinRtt,
+             pingResultsMaxRtt,
+             pingResultsAverageRtt,
+             pingResultsProbeResponses,
+             pingResultsSentProbes,
+             pingResultsRttSumOfSquares,
+             pingResultsLastGoodProbe
+           }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the remote ping
+       capability."
+    ::= { pingGroups 4 }
+
+ pingCtlRowStatusGroup OBJECT-GROUP
+   OBJECTS {
+             pingCtlRowStatus
+           }
+   STATUS  current
+   DESCRIPTION
+       "The RowStatus object of the pingCtlTable."
+    ::= { pingGroups 5 }
+
+ pingHistoryGroup OBJECT-GROUP
+   OBJECTS {
+             pingProbeHistoryResponse,
+             pingProbeHistoryStatus,
+             pingProbeHistoryLastRC,
+             pingProbeHistoryTime
+           }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the history
+       capability."
+    ::= { pingGroups 6 }
+
+ pingNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+             pingProbeFailed,
+             pingTestFailed,
+             pingTestCompleted
+          }
+   STATUS        current
+   DESCRIPTION
+       "The notification that are required to be supported by
+       implementations of this MIB."
+   ::= { pingGroups 3 }
+
+ pingGroup OBJECT-GROUP
+   OBJECTS {
+             pingMaxConcurrentRequests,
+             pingCtlTargetAddressType,
+             pingCtlTargetAddress,
+             pingCtlDataSize,
+             pingCtlTimeOut,
+             pingCtlProbeCount,
+             pingCtlAdminStatus,
+             pingCtlDataFill,
+             pingCtlFrequency,
+             pingCtlMaxRows,
+             pingCtlStorageType,
+             pingCtlTrapGeneration,
+             pingCtlTrapProbeFailureFilter,
+             pingCtlTrapTestFailureFilter,
+             pingCtlType,
+             pingCtlDescr,
+             pingCtlByPassRouteTable,
+             pingCtlSourceAddressType,
+             pingCtlSourceAddress,
+             pingCtlIfIndex,
+             pingCtlDSField,
+             pingCtlRowStatus,
+             pingResultsOperStatus,
+             pingResultsIpTargetAddressType,
+             pingResultsIpTargetAddress,
+             pingResultsMinRtt,
+             pingResultsMaxRtt,
+             pingResultsAverageRtt,
+             pingResultsProbeResponses,
+             pingResultsSentProbes,
+             pingResultsRttSumOfSquares,
+             pingProbeHistoryResponse,
+             pingProbeHistoryStatus,
+             pingProbeHistoryLastRC
+           }
+   STATUS  deprecated
+   DESCRIPTION
+       "The group of objects that constitute the remote ping
+       capability."
+    ::= { pingGroups 1 }
+
+ pingTimeStampGroup OBJECT-GROUP
+
+   OBJECTS {
+             pingResultsLastGoodProbe,
+             pingProbeHistoryTime
+           }
+   STATUS  deprecated
+   DESCRIPTION
+       "The group of DateAndTime objects."
+    ::= { pingGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-SCHEDULE-MIB.mib b/snmp_builder/mibs/DISMAN-SCHEDULE-MIB.mib
new file mode 100644
index 0000000..239595e
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-SCHEDULE-MIB.mib
@@ -0,0 +1,699 @@
+DISMAN-SCHEDULE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Integer32, Unsigned32, Counter32, mib-2, zeroDotZero
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION,
+    DateAndTime, RowStatus, StorageType, VariablePointer
+        FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+schedMIB MODULE-IDENTITY
+    LAST-UPDATED "200201070000Z"
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO
+        "WG EMail:  disman@dorothy.bmc.com
+         Subscribe: disman-request@dorothy.bmc.com
+
+         Chair:     Randy Presuhn
+                    BMC Software, Inc.
+         Postal:    Office 1-3141
+                    2141 North First Street
+                    San Jose,  California 95131
+                    USA
+         EMail:     rpresuhn@bmc.com
+         Phone:     +1 408 546-1006
+
+         Editor:    David B. Levi
+                    Nortel Networks
+         Postal:    4401 Great America Parkway
+                    Santa Clara, CA 95052-8185
+                    USA
+         EMail:     dlevi@nortelnetworks.com
+         Phone:     +1 865 686 0432
+
+         Editor:    Juergen Schoenwaelder
+                    TU Braunschweig
+         Postal:    Bueltenweg 74/75
+                    38106 Braunschweig
+                    Germany
+         EMail:     schoenw@ibr.cs.tu-bs.de
+         Phone:     +49 531 391-3283"
+    DESCRIPTION
+        "This MIB module defines a MIB which provides mechanisms to
+         schedule SNMP set operations periodically or at specific
+         points in time."
+    REVISION    "200201070000Z"
+    DESCRIPTION
+        "Revised version, published as RFC 3231.
+
+         This revision introduces a new object type called
+         schedTriggers.  Created new conformance and compliance
+         statements that take care of the new schedTriggers object.
+
+         Several clarifications have been added to remove ambiguities
+         that were discovered and reported by implementors."
+    REVISION    "199811171800Z"
+    DESCRIPTION
+        "Initial version, published as RFC 2591."
+    ::= { mib-2 63 }
+
+--
+-- The various groups defined within this MIB definition:
+--
+
+schedObjects       OBJECT IDENTIFIER ::= { schedMIB 1 }
+schedNotifications OBJECT IDENTIFIER ::= { schedMIB 2 }
+schedConformance   OBJECT IDENTIFIER ::= { schedMIB 3 }
+
+--
+-- Textual Conventions:
+--
+
+SnmpPduErrorStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "This TC enumerates the SNMPv1 and SNMPv2 PDU error status
+         codes as defined in RFC 1157 and RFC 1905.  It also adds a
+         pseudo error status code `noResponse' which indicates a
+         timeout condition."
+    SYNTAX      INTEGER {
+                    noResponse(-1),
+                    noError(0),
+                    tooBig(1),
+                    noSuchName(2),
+                    badValue(3),
+                    readOnly(4),
+                    genErr(5),
+                    noAccess(6),
+                    wrongType(7),
+                    wrongLength(8),
+                    wrongEncoding(9),
+                    wrongValue(10),
+                    noCreation(11),
+                    inconsistentValue(12),
+                    resourceUnavailable(13),
+                    commitFailed(14),
+                    undoFailed(15),
+                    authorizationError(16),
+                    notWritable(17),
+                    inconsistentName(18)
+                }
+
+--
+-- Some scalars which provide information about the local time zone.
+--
+
+schedLocalTime OBJECT-TYPE
+    SYNTAX      DateAndTime (SIZE (11))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The local time used by the scheduler.  Schedules which
+         refer to calendar time will use the local time indicated
+         by this object.  An implementation MUST return all 11 bytes
+         of the DateAndTime textual-convention so that a manager
+         may retrieve the offset from GMT time."
+    ::= { schedObjects 1 }
+
+--
+-- The schedule table which controls the scheduler.
+--
+
+schedTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SchedEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines scheduled actions triggered by
+         SNMP set operations."
+    ::= { schedObjects 2 }
+
+schedEntry OBJECT-TYPE
+    SYNTAX      SchedEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular scheduled action.
+
+         Unless noted otherwise, writable objects of this row
+         can be modified independent of the current value of
+         schedRowStatus, schedAdminStatus and schedOperStatus.
+         In particular, it is legal to modify schedInterval
+         and the objects in the schedCalendarGroup when
+         schedRowStatus is active and schedAdminStatus and
+         schedOperStatus are both enabled."
+    INDEX { schedOwner, schedName }
+    ::= { schedTable 1 }
+
+SchedEntry ::= SEQUENCE {
+    schedOwner          SnmpAdminString,
+    schedName           SnmpAdminString,
+    schedDescr          SnmpAdminString,
+    schedInterval       Unsigned32,
+    schedWeekDay        BITS,
+    schedMonth          BITS,
+    schedDay            BITS,
+    schedHour           BITS,
+    schedMinute         BITS,
+    schedContextName    SnmpAdminString,
+    schedVariable       VariablePointer,
+    schedValue          Integer32,
+    schedType           INTEGER,
+    schedAdminStatus    INTEGER,
+    schedOperStatus     INTEGER,
+    schedFailures       Counter32,
+    schedLastFailure    SnmpPduErrorStatus,
+    schedLastFailed     DateAndTime,
+    schedStorageType    StorageType,
+    schedRowStatus      RowStatus,
+    schedTriggers       Counter32
+}
+
+schedOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The owner of this scheduling entry.  The exact semantics of
+         this string are subject to the security policy defined by
+
+         the security administrator."
+    ::= { schedEntry 1 }
+
+schedName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally-unique, administratively assigned name for this
+         scheduling entry.  This object allows a schedOwner to have
+         multiple entries in the schedTable."
+    ::= { schedEntry 2 }
+
+schedDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The human readable description of the purpose of this
+         scheduling entry."
+    DEFVAL      { "" }
+    ::= { schedEntry 3 }
+
+schedInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of seconds between two action invocations of
+         a periodic scheduler.  Implementations must guarantee
+         that action invocations will not occur before at least
+         schedInterval seconds have passed.
+
+         The scheduler must ignore all periodic schedules that
+         have a schedInterval value of 0.  A periodic schedule
+         with a scheduling interval of 0 seconds will therefore
+         never invoke an action.
+
+         Implementations may be forced to delay invocations in the
+         face of local constraints.  A scheduled management function
+         should therefore not rely on the accuracy provided by the
+         scheduler implementation.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { 0 }
+    ::= { schedEntry 4 }
+
+schedWeekDay OBJECT-TYPE
+    SYNTAX      BITS {
+                    sunday(0),
+                    monday(1),
+                    tuesday(2),
+                    wednesday(3),
+                    thursday(4),
+                    friday(5),
+                    saturday(6)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of weekdays on which the scheduled action should
+         take place.  Setting multiple bits will include several
+         weekdays in the set of possible weekdays for this schedule.
+         Setting all bits will cause the scheduler to ignore the
+         weekday.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { {} }
+    ::= { schedEntry 5 }
+
+schedMonth OBJECT-TYPE
+    SYNTAX      BITS {
+                    january(0),
+                    february(1),
+                    march(2),
+                    april(3),
+                    may(4),
+                    june(5),
+                    july(6),
+                    august(7),
+                    september(8),
+                    october(9),
+                    november(10),
+                    december(11)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of months during which the scheduled action should
+         take place.  Setting multiple bits will include several
+         months in the set of possible months for this schedule.
+
+         Setting all bits will cause the scheduler to ignore the
+         month.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { {} }
+    ::= { schedEntry 6 }
+
+schedDay OBJECT-TYPE
+    SYNTAX      BITS {
+                    d1(0),   d2(1),   d3(2),   d4(3),   d5(4),
+                    d6(5),   d7(6),   d8(7),   d9(8),   d10(9),
+                    d11(10), d12(11), d13(12), d14(13), d15(14),
+                    d16(15), d17(16), d18(17), d19(18), d20(19),
+                    d21(20), d22(21), d23(22), d24(23), d25(24),
+                    d26(25), d27(26), d28(27), d29(28), d30(29),
+                    d31(30),
+                    r1(31),  r2(32),  r3(33),  r4(34),  r5(35),
+                    r6(36),  r7(37),  r8(38),  r9(39),  r10(40),
+                    r11(41), r12(42), r13(43), r14(44), r15(45),
+                    r16(46), r17(47), r18(48), r19(49), r20(50),
+                    r21(51), r22(52), r23(53), r24(54), r25(55),
+                    r26(56), r27(57), r28(58), r29(59), r30(60),
+                    r31(61)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of days in a month on which a scheduled action
+         should take place.  There are two sets of bits one can
+         use to define the day within a month:
+
+         Enumerations starting with the letter 'd' indicate a
+         day in a month relative to the first day of a month.
+         The first day of the month can therefore be specified
+         by setting the bit d1(0) and d31(30) means the last
+         day of a month with 31 days.
+
+         Enumerations starting with the letter 'r' indicate a
+         day in a month in reverse order, relative to the last
+         day of a month.  The last day in the month can therefore
+         be specified by setting the bit r1(31) and r31(61) means
+         the first day of a month with 31 days.
+
+         Setting multiple bits will include several days in the set
+         of possible days for this schedule.  Setting all bits will
+         cause the scheduler to ignore the day within a month.
+
+         Setting all bits starting with the letter 'd' or the
+         letter 'r' will also cause the scheduler to ignore the
+         day within a month.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { {} }
+    ::= { schedEntry 7 }
+
+schedHour OBJECT-TYPE
+    SYNTAX      BITS {
+                    h0(0),   h1(1),   h2(2),   h3(3),   h4(4),
+                    h5(5),   h6(6),   h7(7),   h8(8),   h9(9),
+                    h10(10), h11(11), h12(12), h13(13), h14(14),
+                    h15(15), h16(16), h17(17), h18(18), h19(19),
+                    h20(20), h21(21), h22(22), h23(23)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of hours within a day during which the scheduled
+         action should take place.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { {} }
+    ::= { schedEntry 8 }
+
+schedMinute OBJECT-TYPE
+    SYNTAX      BITS {
+                    m0(0),   m1(1),   m2(2),   m3(3),   m4(4),
+                    m5(5),   m6(6),   m7(7),   m8(8),   m9(9),
+                    m10(10), m11(11), m12(12), m13(13), m14(14),
+                    m15(15), m16(16), m17(17), m18(18), m19(19),
+                    m20(20), m21(21), m22(22), m23(23), m24(24),
+                    m25(25), m26(26), m27(27), m28(28), m29(29),
+                    m30(30), m31(31), m32(32), m33(33), m34(34),
+                    m35(35), m36(36), m37(37), m38(38), m39(39),
+                    m40(40), m41(41), m42(42), m43(43), m44(44),
+                    m45(45), m46(46), m47(47), m48(48), m49(49),
+                    m50(50), m51(51), m52(52), m53(53), m54(54),
+                    m55(55), m56(56), m57(57), m58(58), m59(59)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of minutes within an hour when the scheduled action
+         should take place.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { {} }
+    ::= { schedEntry 9 }
+
+schedContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The context which contains the local MIB variable pointed
+         to by schedVariable."
+    DEFVAL      { "" }
+    ::= { schedEntry 10 }
+
+schedVariable OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object identifier pointing to a local MIB variable
+         which resolves to an ASN.1 primitive type of INTEGER."
+    DEFVAL      { zeroDotZero }
+    ::= { schedEntry 11 }
+
+schedValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value which is written to the MIB object pointed to by
+         schedVariable when the scheduler invokes an action.  The
+         implementation shall enforce the use of access control
+         rules when performing the set operation on schedVariable.
+         This is accomplished by calling the isAccessAllowed abstract
+         service interface as defined in RFC 2571.
+
+         Note that an implementation may choose to issue an SNMP Set
+         message to the SNMP engine and leave the access control
+         decision to the normal message processing procedure."
+    DEFVAL      { 0 }
+    ::= { schedEntry 12 }
+
+schedType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    periodic(1),
+                    calendar(2),
+                    oneshot(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of this schedule.  The value periodic(1) indicates
+         that this entry specifies a periodic schedule.  A periodic
+         schedule is defined by the value of schedInterval.  The
+         values of schedWeekDay, schedMonth, schedDay, schedHour
+         and schedMinute are ignored.
+
+         The value calendar(2) indicates that this entry describes a
+         calendar schedule.  A calendar schedule is defined by the
+         values of schedWeekDay, schedMonth, schedDay, schedHour and
+         schedMinute.  The value of schedInterval is ignored.  A
+         calendar schedule will trigger on all local times that
+         satisfy the bits set in schedWeekDay, schedMonth, schedDay,
+         schedHour and schedMinute.
+
+         The value oneshot(3) indicates that this entry describes a
+         one-shot schedule.  A one-shot schedule is similar to a
+         calendar schedule with the additional feature that it
+         disables itself by changing in the `finished'
+         schedOperStatus once the schedule triggers an action.
+
+         Note that implementations which maintain a list of pending
+         activations must re-calculate them when this object is
+         changed."
+    DEFVAL      { periodic }
+    ::= { schedEntry 13 }
+
+schedAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The desired state of the schedule."
+    DEFVAL      { disabled }
+    ::= { schedEntry 14 }
+
+schedOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+
+                    enabled(1),
+                    disabled(2),
+                    finished(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current operational state of this schedule.  The state
+         enabled(1) indicates this entry is active and that the
+         scheduler will invoke actions at appropriate times.  The
+         disabled(2) state indicates that this entry is currently
+         inactive and ignored by the scheduler.  The finished(3)
+         state indicates that the schedule has ended.  Schedules
+         in the finished(3) state are ignored by the scheduler.
+         A one-shot schedule enters the finished(3) state when it
+         deactivates itself.
+
+         Note that the operational state must not be enabled(1)
+         when the schedRowStatus is not active."
+    ::= { schedEntry 15 }
+
+schedFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This variable counts the number of failures while invoking
+         the scheduled action.  This counter at most increments once
+         for a triggered action."
+    ::= { schedEntry 16 }
+
+schedLastFailure OBJECT-TYPE
+    SYNTAX      SnmpPduErrorStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The most recent error that occurred during the invocation of
+         a scheduled action.  The value noError(0) is returned
+         if no errors have occurred yet."
+    DEFVAL      { noError }
+    ::= { schedEntry 17 }
+
+schedLastFailed OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the most recent failure occurred.
+
+         The value '0000000000000000'H is returned if no failure
+         occurred since the last re-initialization of the scheduler."
+    DEFVAL      { '0000000000000000'H }
+    ::= { schedEntry 18 }
+
+schedStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this scheduled action is kept
+         in volatile storage and lost upon reboot or if this row is
+         backed up by non-volatile or permanent storage.
+
+         Conceptual rows having the value `permanent' must allow
+         write access to the columnar objects schedDescr,
+         schedInterval, schedContextName, schedVariable, schedValue,
+         and schedAdminStatus.  If an implementation supports the
+         schedCalendarGroup, write access must be also allowed to
+         the columnar objects schedWeekDay, schedMonth, schedDay,
+         schedHour, schedMinute."
+    DEFVAL      { volatile }
+    ::= { schedEntry 19 }
+
+schedRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this scheduled action.  A control that allows
+         entries to be added and removed from this table.
+
+         Note that the operational state must change to enabled
+         when the administrative state is enabled and the row
+         status changes to active(1).
+
+         Attempts to destroy(6) a row or to set a row
+         notInService(2) while the operational state is enabled
+         result in inconsistentValue errors.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified."
+    ::= { schedEntry 20 }
+
+schedTriggers OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This variable counts the number of attempts (either
+         successful or failed) to invoke the scheduled action."
+    ::= { schedEntry 21 }
+
+--
+-- Notifications that are emitted to indicate failures.  The
+-- definition of schedTraps makes notification registrations
+-- reversible (see STD 58, RFC 2578).
+--
+
+schedTraps OBJECT IDENTIFIER ::= { schedNotifications 0 }
+
+schedActionFailure NOTIFICATION-TYPE
+    OBJECTS     { schedLastFailure, schedLastFailed }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated whenever the invocation of a
+         scheduled action fails."
+    ::= { schedTraps 1 }
+
+-- conformance information
+
+schedCompliances OBJECT IDENTIFIER ::= { schedConformance 1 }
+schedGroups      OBJECT IDENTIFIER ::= { schedConformance 2 }
+
+-- compliance statements
+
+schedCompliance2 MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which implement
+         the scheduling MIB."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+           schedGroup2, schedNotificationsGroup
+    }
+    GROUP  schedCalendarGroup
+    DESCRIPTION
+        "The schedCalendarGroup is mandatory only for those
+         implementations that support calendar based schedules."
+    OBJECT schedType
+    DESCRIPTION
+        "The values calendar(2) or oneshot(3) are not valid for
+         implementations that do not implement the
+         schedCalendarGroup.  Such an implementation must return
+         inconsistentValue error responses for attempts to set
+         schedAdminStatus to calendar(2) or oneshot(3)."
+    ::= { schedCompliances 2 }
+
+schedGroup2 OBJECT-GROUP
+    OBJECTS {
+        schedDescr, schedInterval, schedContextName,
+        schedVariable, schedValue, schedType,
+        schedAdminStatus, schedOperStatus, schedFailures,
+        schedLastFailure, schedLastFailed, schedStorageType,
+        schedRowStatus, schedTriggers
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing scheduling capabilities."
+    ::= { schedGroups 4 }
+
+schedCalendarGroup OBJECT-GROUP
+    OBJECTS {
+        schedLocalTime, schedWeekDay, schedMonth,
+        schedDay, schedHour, schedMinute
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing calendar based schedules."
+    ::= { schedGroups 2 }
+
+schedNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        schedActionFailure
+    }
+    STATUS      current
+    DESCRIPTION
+        "The notifications emitted by the scheduler."
+    ::= { schedGroups 3 }
+
+--
+-- Deprecated compliance and conformance group definitions
+-- from RFC 2591.
+--
+
+schedCompliance MODULE-COMPLIANCE
+    STATUS      deprecated
+    DESCRIPTION
+        "The compliance statement for SNMP entities which implement
+         the scheduling MIB."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+           schedGroup, schedNotificationsGroup
+    }
+
+    GROUP  schedCalendarGroup
+    DESCRIPTION
+        "The schedCalendarGroup is mandatory only for those
+         implementations that support calendar based schedules."
+    OBJECT schedType
+    DESCRIPTION
+        "The values calendar(2) or oneshot(3) are not valid for
+         implementations that do not implement the
+         schedCalendarGroup.  Such an implementation must return
+         inconsistentValue error responses for attempts to set
+         schedAdminStatus to calendar(2) or oneshot(3)."
+    ::= { schedCompliances 1 }
+
+schedGroup OBJECT-GROUP
+    OBJECTS {
+        schedDescr, schedInterval, schedContextName,
+        schedVariable, schedValue, schedType,
+        schedAdminStatus, schedOperStatus, schedFailures,
+        schedLastFailure, schedLastFailed, schedStorageType,
+        schedRowStatus
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "A collection of objects providing scheduling capabilities."
+    ::= { schedGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-SCRIPT-MIB.mib b/snmp_builder/mibs/DISMAN-SCRIPT-MIB.mib
new file mode 100644
index 0000000..834f304
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-SCRIPT-MIB.mib
@@ -0,0 +1,1764 @@
+DISMAN-SCRIPT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Integer32, Unsigned32, mib-2
+        FROM SNMPv2-SMI
+
+    RowStatus, TimeInterval, DateAndTime, StorageType, DisplayString
+        FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+scriptMIB MODULE-IDENTITY
+    LAST-UPDATED "200108210000Z"
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO
+        "WG EMail:  disman@dorothy.bmc.com
+         Subscribe: disman-request@dorothy.bmc.com
+
+         Chair:     Randy Presuhn
+                    BMC Software, Inc.
+
+         Postal:    Office 1-3141
+                    2141 North First Street
+                    San Jose,  California 95131
+                    USA
+         EMail:     rpresuhn@bmc.com
+         Phone:     +1 408 546-1006
+
+         Editor:    David B. Levi
+                    Nortel Networks
+         Postal:    4401 Great America Parkway
+                    Santa Clara, CA 95052-8185
+                    USA
+         EMail:     dlevi@nortelnetworks.com
+         Phone:     +1 423 686 0432
+
+         Editor:    Juergen Schoenwaelder
+                    TU Braunschweig
+         Postal:    Bueltenweg 74/75
+                    38106 Braunschweig
+                    Germany
+         EMail:     schoenw@ibr.cs.tu-bs.de
+         Phone:     +49 531 391-3283"
+    DESCRIPTION
+        "This MIB module defines a set of objects that allow to
+         delegate management scripts to distributed managers."
+    REVISION    "200108210000Z"
+    DESCRIPTION
+        "Revised version, published as RFC 3165.
+
+         This revision introduces several new objects: smScriptError,
+         smScriptLastChange, smLaunchError, smLaunchLastChange,
+         smLaunchRowExpireTime, smRunResultTime, and smRunErrorTime.
+
+         The following existing objects were updated: the maximum
+         value of smRunLifeTime now disables the timer, an
+         autostart value was added to the smLaunchAdminStatus
+         object, and a new expired state was added to the
+         smLaunchOperStatus object.
+
+         A new smScriptException notification has been added to
+         support runtime error notifications.
+
+         Created new conformance and compliance statements that
+         take care of the new objects and notifications.
+
+         Clarifications have been added in several places to remove
+         ambiguities or contradictions that were discovered and
+         reported by implementors."
+
+    REVISION    "199902221800Z"
+    DESCRIPTION
+        "Initial version, published as RFC 2592."
+    ::= { mib-2 64 }
+
+--
+-- The groups defined within this MIB module:
+--
+
+smObjects       OBJECT IDENTIFIER ::= { scriptMIB 1 }
+smNotifications OBJECT IDENTIFIER ::= { scriptMIB 2 }
+smConformance   OBJECT IDENTIFIER ::= { scriptMIB 3 }
+
+--
+-- Script language and language extensions.
+--
+-- This group defines tables which list the languages and the
+-- language extensions supported by a Script MIB implementation.
+-- Languages are uniquely identified by object identifier values.
+--
+
+smLangTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmLangEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists supported script languages."
+    ::= { smObjects 1 }
+
+smLangEntry OBJECT-TYPE
+    SYNTAX      SmLangEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular language."
+    INDEX { smLangIndex }
+    ::= { smLangTable 1 }
+
+SmLangEntry ::= SEQUENCE {
+    smLangIndex         Integer32,
+    smLangLanguage      OBJECT IDENTIFIER,
+    smLangVersion       SnmpAdminString,
+    smLangVendor        OBJECT IDENTIFIER,
+    smLangRevision      SnmpAdminString,
+    smLangDescr         SnmpAdminString
+}
+
+smLangIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this language entry.
+
+         The value is expected to remain constant at least from one
+         re-initialization of the entity's network management system
+         to the next re-initialization.
+
+         Note that the data type and the range of this object must
+         be consistent with the definition of smScriptLanguage."
+    ::= { smLangEntry 1 }
+
+smLangLanguage OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The globally unique identification of the language."
+    ::= { smLangEntry 2 }
+
+smLangVersion OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of the language. The zero-length string
+         shall be used if the language does not have a version
+         number.
+
+         It is suggested that the version number consist of one or
+         more decimal numbers separated by dots, where the first
+         number is called the major version number."
+    ::= { smLangEntry 3 }
+
+smLangVendor OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An object identifier which identifies the vendor who
+         provides the implementation of the language. This object
+         identifier SHALL point to the object identifier directly
+         below the enterprise object identifier {1 3 6 1 4 1}
+         allocated for the vendor. The value must be the object
+         identifier {0 0} if the vendor is not known."
+    ::= { smLangEntry 4 }
+
+smLangRevision OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of the language implementation.
+         The value of this object must be an empty string if
+         version number of the implementation is unknown.
+
+         It is suggested that the value consist of one or more
+         decimal numbers separated by dots, where the first
+         number is called the major version number."
+    ::= { smLangEntry 5 }
+
+smLangDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A textual description of the language."
+    ::= { smLangEntry 6 }
+
+smExtsnTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmExtsnEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists supported language extensions."
+    ::= { smObjects 2 }
+
+smExtsnEntry OBJECT-TYPE
+    SYNTAX      SmExtsnEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular language extension."
+    INDEX { smLangIndex, smExtsnIndex }
+    ::= { smExtsnTable 1 }
+
+SmExtsnEntry ::= SEQUENCE {
+    smExtsnIndex        Integer32,
+    smExtsnExtension    OBJECT IDENTIFIER,
+    smExtsnVersion      SnmpAdminString,
+    smExtsnVendor       OBJECT IDENTIFIER,
+    smExtsnRevision     SnmpAdminString,
+    smExtsnDescr        SnmpAdminString
+}
+
+smExtsnIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this language extension entry.
+
+         The value is expected to remain constant at least from one
+         re-initialization of the entity's network management system
+         to the next re-initialization."
+    ::= { smExtsnEntry 1}
+
+smExtsnExtension OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The globally unique identification of the language
+         extension."
+    ::= { smExtsnEntry 2 }
+
+smExtsnVersion OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of the language extension.
+         It is suggested that the version number consist of one or
+         more decimal numbers separated by dots, where the first
+         number is called the major version number."
+    ::= { smExtsnEntry 3 }
+
+smExtsnVendor OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An object identifier which identifies the vendor who
+         provides the implementation of the extension. The
+         object identifier value should point to the OID node
+         directly below the enterprise OID {1 3 6 1 4 1}
+         allocated for the vendor. The value must by the object
+         identifier {0 0} if the vendor is not known."
+    ::= { smExtsnEntry 4 }
+
+smExtsnRevision OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of the extension implementation.
+         The value of this object must be an empty string if
+         version number of the implementation is unknown.
+
+         It is suggested that the value consist of one or more
+         decimal numbers separated by dots, where the first
+         number is called the major version number."
+    ::= { smExtsnEntry 5 }
+
+smExtsnDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A textual description of the language extension."
+    ::= { smExtsnEntry 6 }
+
+--
+-- Scripts known by the Script MIB implementation.
+--
+-- This group defines a table which lists all known scripts.
+-- Scripts can be added and removed through manipulation of the
+-- smScriptTable.
+--
+
+smScriptObjects OBJECT IDENTIFIER ::= { smObjects 3 }
+
+smScriptTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmScriptEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes locally known scripts."
+    ::= { smScriptObjects 1 }
+
+smScriptEntry OBJECT-TYPE
+    SYNTAX      SmScriptEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular script. Every script that
+         is stored in non-volatile memory is required to appear in
+         this script table."
+    INDEX { smScriptOwner, smScriptName }
+    ::= { smScriptTable 1 }
+
+SmScriptEntry ::= SEQUENCE {
+    smScriptOwner       SnmpAdminString,
+    smScriptName        SnmpAdminString,
+    smScriptDescr       SnmpAdminString,
+    smScriptLanguage    Integer32,
+    smScriptSource      DisplayString,
+    smScriptAdminStatus INTEGER,
+    smScriptOperStatus  INTEGER,
+    smScriptStorageType StorageType,
+    smScriptRowStatus   RowStatus,
+    smScriptError       SnmpAdminString,
+    smScriptLastChange  DateAndTime
+}
+
+smScriptOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The manager who owns this row in the smScriptTable."
+    ::= { smScriptEntry 1 }
+
+smScriptName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally-unique, administratively assigned name for this
+         script. This object allows an smScriptOwner to have multiple
+         entries in the smScriptTable.
+
+         This value of this object may be used to derive the name
+         (e.g. a file name) which is used by the Script MIB
+         implementation to access the script in non-volatile
+         storage. The details of this mapping are implementation
+         specific. However, the mapping needs to ensure that scripts
+         created by different owners with the same script name do not
+         map to the same name in non-volatile storage."
+    ::= { smScriptEntry 2 }
+
+smScriptDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A description of the purpose of the script."
+    ::= { smScriptEntry 3 }
+
+smScriptLanguage OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object type identifies an entry in the
+         smLangTable which is used to execute this script.
+         The special value 0 may be used by hard-wired scripts
+         that can not be modified and that are executed by
+         internal functions.
+
+         Set requests to change this object are invalid if the
+         value of smScriptOperStatus is `enabled' or `compiling'
+         and will result in an inconsistentValue error.
+
+         Note that the data type and the range of this object must
+         be consistent with the definition of smLangIndex."
+    ::= { smScriptEntry 4 }
+
+smScriptSource OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object either contains a reference to the script
+         source or an empty string. A reference must be given
+         in the form of a Uniform Resource Locator (URL) as
+         defined in RFC 2396. The allowed character sets and the
+         encoding rules defined in RFC 2396 section 2 apply.
+
+         When the smScriptAdminStatus object is set to `enabled',
+         the Script MIB implementation will `pull' the script
+         source from the URL contained in this object if the URL
+         is not empty.
+
+         An empty URL indicates that the script source is loaded
+         from local storage. The script is read from the smCodeTable
+         if the value of smScriptStorageType is volatile. Otherwise,
+         the script is read from non-volatile storage.
+
+         Note: This document does not mandate implementation of any
+         specific URL scheme. An attempt to load a script from a
+         nonsupported URL scheme will cause the smScriptOperStatus
+         to report an `unknownProtocol' error.
+
+         Set requests to change this object are invalid if the
+         value of smScriptOperStatus is `enabled', `editing',
+         `retrieving' or `compiling' and will result in an
+         inconsistentValue error."
+    DEFVAL { ''H }
+    ::= { smScriptEntry 5 }
+
+smScriptAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2),
+                    editing(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the desired status of
+         the script. See the definition of smScriptOperStatus for
+         a description of the values.
+
+         When the smScriptAdminStatus object is set to `enabled' and
+         the smScriptOperStatus is `disabled' or one of the error
+         states, the Script MIB implementation will `pull' the script
+         source from the URL contained in the smScriptSource object
+         if the URL is not empty."
+    DEFVAL { disabled }
+    ::= { smScriptEntry 6 }
+
+smScriptOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2),
+                    editing(3),
+                    retrieving(4),
+                    compiling(5),
+                    noSuchScript(6),
+                    accessDenied(7),
+                    wrongLanguage(8),
+                    wrongVersion(9),
+                    compilationFailed(10),
+                    noResourcesLeft(11),
+                    unknownProtocol(12),
+                    protocolFailure(13),
+                    genericError(14)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The actual status of the script in the runtime system. The
+         value of this object is only meaningful when the value of
+         the smScriptRowStatus object is `active'.
+
+         The smScriptOperStatus object may have the following values:
+
+         - `enabled' indicates that the script is available and can
+            be started by a launch table entry.
+
+         - `disabled' indicates that the script can not be used.
+
+         - `editing' indicates that the script can be modified in the
+           smCodeTable.
+
+         - `retrieving' indicates that the script is currently being
+           loaded from non-volatile storage or a remote system.
+
+         - `compiling' indicates that the script is currently being
+           compiled by the runtime system.
+
+         - `noSuchScript' indicates that the script does not exist
+           at the smScriptSource.
+
+         - `accessDenied' indicates that the script can not be loaded
+           from the smScriptSource due to a lack of permissions.
+
+         - `wrongLanguage' indicates that the script can not be
+            loaded from the smScriptSource because of a language
+            mismatch.
+
+         - `wrongVersion' indicates that the script can not be loaded
+           from the smScriptSource because of a language version
+           mismatch.
+
+         - `compilationFailed' indicates that the compilation failed.
+
+         - `noResourcesLeft' indicates that the runtime system does
+           not have enough resources to load the script.
+
+         - `unknownProtocol' indicates that the script could not be
+           loaded from the smScriptSource because the requested
+           protocol is not supported.
+
+         - `protocolFailure' indicates that the script could not be
+           loaded from the smScriptSource because of a protocol
+           failure.
+
+         - `genericError' indicates that the script could not be
+
+           loaded due to an error condition not listed above.
+
+         The `retrieving' and `compiling' states are transient states
+         which will either lead to one of the error states or the
+         `enabled' state. The `disabled' and `editing' states are
+         administrative states which are only reached by explicit
+         management operations.
+
+         All launch table entries that refer to this script table
+         entry shall have an smLaunchOperStatus value of `disabled'
+         when the value of this object is not `enabled'."
+    DEFVAL { disabled }
+    ::= { smScriptEntry 7 }
+
+smScriptStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this row and the script
+         controlled by this row are kept in volatile storage and
+         lost upon reboot or if this row is backed up by
+         non-volatile or permanent storage.
+
+         The storage type of this row always complies with the value
+         of this entry if the value of the corresponding RowStatus
+         object is `active'.
+
+         However, the storage type of the script controlled by this
+         row may be different, if the value of this entry is
+         `non-volatile'. The script controlled by this row is written
+         into local non-volatile storage if the following condition
+         becomes true:
+
+         (a) the URL contained in the smScriptSource object is empty
+             and
+         (b) the smScriptStorageType is `nonVolatile'
+             and
+         (c) the smScriptOperStatus is `enabled'
+
+         Setting this object to `volatile' removes a script from
+         non-volatile storage if the script controlled by this row
+         has been in non-volatile storage before. Attempts to set
+         this object to permanent will always fail with an
+         inconsistentValue error.
+
+         The value of smScriptStorageType is only meaningful if the
+         value of the corresponding RowStatus object is `active'.
+
+         If smScriptStorageType has the value permanent(4), then all
+         objects whose MAX-ACCESS value is read-create must be
+         writable, with the exception of the smScriptStorageType and
+         smScriptRowStatus objects, which shall be read-only."
+    DEFVAL { volatile }
+    ::= { smScriptEntry 8 }
+
+smScriptRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A control that allows entries to be added and removed from
+         this table.
+
+         Changing the smScriptRowStatus from `active' to
+         `notInService' will remove the associated script from the
+         runtime system.
+
+         Deleting conceptual rows from this table may affect the
+         deletion of other resources associated with this row. For
+         example, a script stored in non-volatile storage may be
+         removed from non-volatile storage.
+
+         An entry may not exist in the `active' state unless all
+         required objects in the entry have appropriate values. Rows
+         that are not complete or not in service are not known by the
+         script runtime system.
+
+         Attempts to `destroy' a row or to set a row `notInService'
+         while the smScriptOperStatus is `enabled' will result in an
+         inconsistentValue error.
+
+         Attempts to `destroy' a row or to set a row `notInService'
+         where the value of the smScriptStorageType object is
+         `permanent' or `readOnly' will result in an
+         inconsistentValue error.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified."
+    ::= { smScriptEntry 9 }
+
+smScriptError OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a descriptive error message if the
+
+         transition into the operational status `enabled' failed.
+         Implementations must reset the error message to a
+         zero-length string when a new attempt to change the
+         script status to `enabled' is started."
+    DEFVAL { ''H }
+    ::= { smScriptEntry 10 }
+
+smScriptLastChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when this script table entry was last
+         modified. The value '0000000000000000'H is returned if
+         the script table entry has not yet been modified.
+
+         Note that the resetting of smScriptError is not considered
+         a change of the script table entry."
+    DEFVAL { '0000000000000000'H }
+    ::= { smScriptEntry 11 }
+
+--
+-- Access to script code via SNMP
+--
+-- The smCodeTable allows script code to be read and modified
+-- via SNMP.
+--
+
+smCodeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmCodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains the script code for scripts that are
+         written via SNMP write operations."
+    ::= { smScriptObjects 2 }
+
+smCodeEntry OBJECT-TYPE
+    SYNTAX      SmCodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular fragment of a script."
+    INDEX { smScriptOwner, smScriptName, smCodeIndex }
+    ::= { smCodeTable 1 }
+
+SmCodeEntry ::= SEQUENCE {
+    smCodeIndex         Unsigned32,
+    smCodeText          OCTET STRING,
+    smCodeRowStatus     RowStatus
+}
+
+smCodeIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index value identifying this code fragment."
+    ::= { smCodeEntry 1 }
+
+smCodeText OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (1..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The code that makes up a fragment of a script. The format
+         of this code fragment depends on the script language which
+         is identified by the associated smScriptLanguage object."
+    ::= { smCodeEntry 2 }
+
+smCodeRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A control that allows entries to be added and removed from
+         this table.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified."
+    ::= { smCodeEntry 3 }
+
+--
+-- Script execution.
+--
+-- This group defines tables which allow script execution to be
+-- initiated, suspended, resumed, and terminated.  It also provides
+-- a mechanism for keeping a history of recent script executions
+-- and their results.
+--
+
+smRunObjects OBJECT IDENTIFIER ::= { smObjects 4 }
+
+smLaunchTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmLaunchEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes scripts that are ready
+         to be executed together with their parameters."
+    ::= { smRunObjects 1 }
+
+smLaunchEntry OBJECT-TYPE
+    SYNTAX      SmLaunchEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular executable script."
+    INDEX { smLaunchOwner, smLaunchName }
+    ::= { smLaunchTable 1 }
+
+SmLaunchEntry ::= SEQUENCE {
+    smLaunchOwner               SnmpAdminString,
+    smLaunchName                SnmpAdminString,
+    smLaunchScriptOwner         SnmpAdminString,
+    smLaunchScriptName          SnmpAdminString,
+    smLaunchArgument            OCTET STRING,
+    smLaunchMaxRunning          Unsigned32,
+    smLaunchMaxCompleted        Unsigned32,
+    smLaunchLifeTime            TimeInterval,
+    smLaunchExpireTime          TimeInterval,
+    smLaunchStart               Integer32,
+    smLaunchControl             INTEGER,
+    smLaunchAdminStatus         INTEGER,
+    smLaunchOperStatus          INTEGER,
+    smLaunchRunIndexNext        Integer32,
+    smLaunchStorageType         StorageType,
+    smLaunchRowStatus           RowStatus,
+    smLaunchError               SnmpAdminString,
+    smLaunchLastChange          DateAndTime,
+    smLaunchRowExpireTime       TimeInterval
+}
+
+smLaunchOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The manager who owns this row in the smLaunchTable. Every
+         instance of a running script started from a particular entry
+         in the smLaunchTable (i.e. entries in the smRunTable) will
+         be owned by the same smLaunchOwner used to index the entry
+         in the smLaunchTable. This owner is not necessarily the same
+         as the owner of the script itself (smLaunchScriptOwner)."
+    ::= { smLaunchEntry 1 }
+
+smLaunchName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally-unique, administratively assigned name for this
+         launch table entry. This object allows an smLaunchOwner to
+         have multiple entries in the smLaunchTable. The smLaunchName
+         is an arbitrary name that must be different from any other
+         smLaunchTable entries with the same smLaunchOwner but can be
+         the same as other entries in the smLaunchTable with
+         different smLaunchOwner values. Note that the value of
+         smLaunchName is not related in any way to the name of the
+         script being launched."
+    ::= { smLaunchEntry 2 }
+
+smLaunchScriptOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object in combination with the value of
+         smLaunchScriptName identifies the script that can be
+         launched from this smLaunchTable entry. Attempts to write
+         this object will fail with an inconsistentValue error if
+         the value of smLaunchOperStatus is `enabled'."
+    ::= { smLaunchEntry 3 }
+
+smLaunchScriptName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object in combination with the value of
+         the smLaunchScriptOwner identifies the script that can be
+         launched from this smLaunchTable entry. The zero-length
+         string may be used to point to a non-existing script.
+
+         Attempts to write this object will fail with an
+         inconsistentValue error if the value of smLaunchOperStatus
+         is `enabled'."
+    DEFVAL { ''H }
+    ::= { smLaunchEntry 4 }
+
+smLaunchArgument OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The argument supplied to the script. When a script is
+         invoked, the value of this object is used to initialize
+         the smRunArgument object."
+    DEFVAL { ''H }
+    ::= { smLaunchEntry 5 }
+
+smLaunchMaxRunning OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of concurrently running scripts that may
+         be invoked from this entry in the smLaunchTable. Lowering
+         the current value of this object does not affect any scripts
+         that are already executing."
+    DEFVAL { 1 }
+    ::= { smLaunchEntry 6 }
+
+smLaunchMaxCompleted OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of finished scripts invoked from this
+         entry in the smLaunchTable allowed to be retained in the
+         smRunTable. Whenever the value of this object is changed
+         and whenever a script terminates, entries in the smRunTable
+         are deleted if necessary until the number of completed
+         scripts is smaller than the value of this object. Scripts
+         whose smRunEndTime value indicates the oldest completion
+         time are deleted first."
+    DEFVAL { 1 }
+    ::= { smLaunchEntry 7 }
+
+smLaunchLifeTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The default maximum amount of time a script launched
+         from this entry may run. The value of this object is used
+         to initialize the smRunLifeTime object when a script is
+         launched. Changing the value of an smLaunchLifeTime
+         instance does not affect scripts previously launched from
+
+         this entry."
+    DEFVAL { 360000 }
+    ::= { smLaunchEntry 8 }
+
+smLaunchExpireTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The default maximum amount of time information about a
+         script launched from this entry is kept in the smRunTable
+         after the script has completed execution.  The value of
+         this object is used to initialize the smRunExpireTime
+         object when a script is launched. Changing the value of an
+         smLaunchExpireTime instance does not affect scripts
+         previously launched from this entry."
+    DEFVAL { 360000 }
+    ::= { smLaunchEntry 9 }
+
+smLaunchStart OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to start the execution of scripts.
+         When retrieved, the value will be the value of smRunIndex
+         for the last script that started execution by manipulating
+         this object. The value will be zero if no script started
+         execution yet.
+
+         A script is started by setting this object to an unused
+         smRunIndex value. A new row in the smRunTable will be
+         created which is indexed by the value supplied by the
+         set-request in addition to the value of smLaunchOwner and
+         smLaunchName. An unused value can be obtained by reading
+         the smLaunchRunIndexNext object.
+
+         Setting this object to the special value 0 will start
+         the script with a self-generated smRunIndex value. The
+         consequence is that the script invoker has no reliable
+         way to determine the smRunIndex value for this script
+         invocation and that the invoker has therefore no way
+         to obtain the results from this script invocation. The
+         special value 0 is however useful for scheduled script
+         invocations.
+
+         If this object is set, the following checks must be
+
+         performed:
+
+         1) The value of the smLaunchOperStatus object in this
+            entry of the smLaunchTable must be `enabled'.
+         2) The values of smLaunchScriptOwner and
+            smLaunchScriptName of this row must identify an
+            existing entry in the smScriptTable.
+         3) The value of smScriptOperStatus of this entry must
+            be `enabled'.
+         4) The principal performing the set operation must have
+            read access to the script. This must be checked by
+            calling the isAccessAllowed abstract service interface
+            defined in RFC 2271 on the row in the smScriptTable
+            identified by smLaunchScriptOwner and smLaunchScriptName.
+            The isAccessAllowed abstract service interface must be
+            called on all columnar objects in the smScriptTable with
+            a MAX-ACCESS value different than `not-accessible'. The
+            test fails as soon as a call indicates that access is
+            not allowed.
+         5) If the value provided by the set operation is not 0,
+            a check must be made that the value is currently not
+            in use. Otherwise, if the value provided by the set
+            operation is 0, a suitable unused value must be
+            generated.
+         6) The number of currently executing scripts invoked
+            from this smLaunchTable entry must be less than
+            smLaunchMaxRunning.
+
+         Attempts to start a script will fail with an
+         inconsistentValue error if one of the checks described
+         above fails.
+
+         Otherwise, if all checks have been passed, a new entry
+         in the smRunTable will be created indexed by smLaunchOwner,
+         smLaunchName and the new value for smRunIndex. The value
+         of smLaunchArgument will be copied into smRunArgument,
+         the value of smLaunchLifeTime will be copied to
+         smRunLifeTime, and the value of smLaunchExpireTime
+         will be copied to smRunExpireTime.
+
+         The smRunStartTime will be set to the current time and
+         the smRunState will be set to `initializing' before the
+         script execution is initiated in the appropriate runtime
+         system.
+
+         Note that the data type and the range of this object must
+         be consistent with the smRunIndex object. Since this
+         object might be written from the scheduling MIB, the
+
+         data type Integer32 rather than Unsigned32 is used."
+    DEFVAL { 0 }
+    ::= { smLaunchEntry 10 }
+
+smLaunchControl OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    abort(1),
+                    suspend(2),
+                    resume(3),
+                    nop(4)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to request a state change for all
+         running scripts in the smRunTable that were started from
+         this row in the smLaunchTable.
+
+         Setting this object to abort(1), suspend(2) or resume(3)
+         will set the smRunControl object of all applicable rows
+         in the smRunTable to abort(1), suspend(2) or resume(3)
+         respectively. The phrase `applicable rows' means the set of
+         rows which were created from this entry in the smLaunchTable
+         and whose value of smRunState allows the corresponding
+         state change as described in the definition of the
+         smRunControl object. Setting this object to nop(4) has no
+         effect.
+
+         Attempts to set this object lead to an inconsistentValue
+         error only if all implicated sets on all the applicable
+         rows lead to inconsistentValue errors. It is not allowed
+         to return an inconsistentValue error if at least one state
+         change on one of the applicable rows was successful."
+    DEFVAL { nop }
+    ::= { smLaunchEntry 11 }
+
+smLaunchAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2),
+                    autostart(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the desired status of
+         this launch table entry. The values enabled(1) and
+         autostart(3) both indicate that the launch table entry
+
+         should transition into the operational enabled(1) state as
+         soon as the associated script table entry is enabled(1).
+
+         The value autostart(3) further indicates that the script
+         is started automatically by conceptually writing the
+         value 0 into the associated smLaunchStart object during
+         the transition from the `disabled' into the `enabled'
+         operational state. This is useful for scripts that are
+         to be launched on system start-up."
+    DEFVAL { disabled }
+    ::= { smLaunchEntry 12 }
+
+smLaunchOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2),
+                    expired(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the actual status of
+         this launch table entry.  The smLaunchOperStatus object
+         may have the following values:
+
+         - `enabled' indicates that the launch table entry is
+           available and can be used to start scripts.
+
+         - `disabled' indicates that the launch table entry can
+           not be used to start scripts.
+
+         - `expired' indicates that the launch table entry can
+           not be used to start scripts and will disappear as
+           soon as all smRunTable entries associated with this
+           launch table entry have disappeared.
+
+         The value `enabled' requires that the smLaunchRowStatus
+         object is active. The value `disabled' requires that there
+         are no entries in the smRunTable associated with this
+         smLaunchTable entry."
+    DEFVAL { disabled }
+    ::= { smLaunchEntry 13 }
+
+smLaunchRunIndexNext OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This variable is used for creating rows in the smRunTable.
+         The value of this variable is a currently unused value
+         for smRunIndex, which can be written into the smLaunchStart
+         object associated with this row to launch a script.
+
+         The value returned when reading this variable must be unique
+         for the smLaunchOwner and smLaunchName associated with this
+         row. Subsequent attempts to read this variable must return
+         different values.
+
+         This variable will return the special value 0 if no new rows
+         can be created.
+
+         Note that the data type and the range of this object must be
+         consistent with the definition of smRunIndex."
+    ::= { smLaunchEntry 14 }
+
+smLaunchStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines if this row is kept in volatile storage
+         and lost upon reboot or if this row is backed up by stable
+         storage.
+
+         The value of smLaunchStorageType is only meaningful if the
+         value of the corresponding RowStatus object is active.
+
+         If smLaunchStorageType has the value permanent(4), then all
+         objects whose MAX-ACCESS value is read-create must be
+         writable, with the exception of the smLaunchStorageType and
+         smLaunchRowStatus objects, which shall be read-only."
+    DEFVAL { volatile }
+    ::= { smLaunchEntry 15 }
+
+smLaunchRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A control that allows entries to be added and removed from
+         this table.
+
+         Attempts to `destroy' a row or to set a row `notInService'
+         while the smLaunchOperStatus is `enabled' will result in
+         an inconsistentValue error.
+
+         Attempts to `destroy' a row or to set a row `notInService'
+         where the value of the smLaunchStorageType object is
+         `permanent' or `readOnly' will result in an
+         inconsistentValue error.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified."
+    ::= { smLaunchEntry 16 }
+
+smLaunchError OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a descriptive error message if an
+         attempt to launch a script fails. Implementations must reset
+         the error message to a zero-length string when a new attempt
+         to launch a script is started."
+    DEFVAL { ''H }
+    ::= { smLaunchEntry 17 }
+
+smLaunchLastChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when this launch table entry was last
+         modified. The value '0000000000000000'H is returned if
+         the launch table entry has not yet been modified.
+
+         Note that a change of smLaunchStart, smLaunchControl,
+         smLaunchRunIndexNext, smLaunchRowExpireTime, or the
+         resetting of smLaunchError is not considered a change
+         of this launch table entry."
+    DEFVAL { '0000000000000000'H }
+    ::= { smLaunchEntry 18 }
+
+smLaunchRowExpireTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object specifies how long this row remains
+         in the `enabled' or `disabled' operational state. The value
+         reported by this object ticks backwards. When the value
+         reaches 0, it stops ticking backward and the row is
+         deleted if there are no smRunTable entries associated with
+
+         this smLaunchTable entry. Otherwise, the smLaunchOperStatus
+         changes to `expired' and the row deletion is deferred
+         until there are no smRunTable entries associated with this
+         smLaunchTable entry.
+
+         The smLaunchRowExpireTime will not tick backwards if it is
+         set to its maximum value (2147483647). In other words,
+         setting this object to its maximum value turns the timer
+         off.
+
+         The value of this object may be set in order to increase
+         or reduce the remaining time that the launch table entry
+         may be used. Setting the value to 0 will cause an immediate
+         row deletion or transition into the `expired' operational
+         state.
+
+         It is not possible to set this object while the operational
+         status is `expired'. Attempts to modify this object while
+         the operational status is `expired' leads to an
+         inconsistentValue error.
+
+         Note that the timer ticks backwards independent of the
+         operational state of the launch table entry."
+    DEFVAL { 2147483647 }
+    ::= { smLaunchEntry 19 }
+
+smRunTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SmRunEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes scripts that are currently
+         running or have been running in the past."
+    ::= { smRunObjects 2 }
+
+smRunEntry OBJECT-TYPE
+    SYNTAX      SmRunEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular running or finished
+         script."
+    INDEX { smLaunchOwner, smLaunchName, smRunIndex }
+    ::= { smRunTable 1 }
+
+SmRunEntry ::= SEQUENCE {
+    smRunIndex          Integer32,
+    smRunArgument       OCTET STRING,
+    smRunStartTime      DateAndTime,
+    smRunEndTime        DateAndTime,
+    smRunLifeTime       TimeInterval,
+    smRunExpireTime     TimeInterval,
+    smRunExitCode       INTEGER,
+    smRunResult         OCTET STRING,
+    smRunControl        INTEGER,
+    smRunState          INTEGER,
+    smRunError          SnmpAdminString,
+    smRunResultTime     DateAndTime,
+    smRunErrorTime      DateAndTime
+}
+
+smRunIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this running or finished script. This value must be
+         unique for all rows in the smRunTable with the same
+         smLaunchOwner and smLaunchName.
+
+         Note that the data type and the range of this object must
+         be consistent with the definition of smLaunchRunIndexNext
+         and smLaunchStart."
+    ::= { smRunEntry 1 }
+
+smRunArgument OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The argument supplied to the script when it started."
+    DEFVAL { ''H }
+    ::= { smRunEntry 2 }
+
+smRunStartTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the execution started. The value
+         '0000000000000000'H is returned if the script has not
+         started yet."
+    DEFVAL { '0000000000000000'H }
+    ::= { smRunEntry 3 }
+
+smRunEndTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the execution terminated. The value
+         '0000000000000000'H is returned if the script has not
+         terminated yet."
+    DEFVAL { '0000000000000000'H }
+    ::= { smRunEntry 4 }
+
+smRunLifeTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object specifies how long the script can execute.
+         This object returns the remaining time that the script
+         may run. The object is initialized with the value of the
+         associated smLaunchLifeTime object and ticks backwards.
+         The script is aborted immediately when the value reaches 0.
+
+         The value of this object may be set in order to increase or
+         reduce the remaining time that the script may run. Setting
+         this value to 0 will abort script execution immediately,
+         and, if the value of smRunExpireTime is also 0, will remove
+         this entry from the smRunTable once it has terminated.
+
+         If smRunLifeTime is set to its maximum value (2147483647),
+         either by a set operation or by its initialization from the
+         smLaunchLifeTime object, then it will not tick backwards.
+         A running script with a maximum smRunLifeTime value will
+         thus never be terminated with a `lifeTimeExceeded' exit
+         code.
+
+         The value of smRunLifeTime reflects the real-time execution
+         time as seen by the outside world. The value of this object
+         will always be 0 for a script that finished execution, that
+         is smRunState has the value `terminated'.
+
+         The value of smRunLifeTime does not change while a script
+         is suspended, that is smRunState has the value `suspended'.
+         Note that this does not affect set operations. It is legal
+         to modify smRunLifeTime via set operations while a script
+         is suspended."
+    ::= { smRunEntry 5 }
+
+smRunExpireTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of this object specifies how long this row can
+         exist in the smRunTable after the script has terminated.
+         This object returns the remaining time that the row may
+         exist before it is aged out. The object is initialized with
+         the value of the associated smLaunchExpireTime object and
+         ticks backwards. The entry in the smRunTable is destroyed
+         when the value reaches 0 and the smRunState has the value
+         `terminated'.
+
+         The value of this object may be set in order to increase or
+         reduce the remaining time that the row may exist.  Setting
+         the value to 0 will destroy this entry as soon as the
+         smRunState has the value `terminated'."
+    ::= { smRunEntry 6 }
+
+smRunExitCode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    noError(1),
+                    halted(2),
+                    lifeTimeExceeded(3),
+                    noResourcesLeft(4),
+                    languageError(5),
+                    runtimeError(6),
+                    invalidArgument(7),
+                    securityViolation(8),
+                    genericError(9)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the reason why a
+         script finished execution. The smRunExitCode code may have
+         one of the following values:
+
+         - `noError', which indicates that the script completed
+            successfully without errors;
+
+         - `halted', which indicates that the script was halted
+            by a request from an authorized manager;
+
+         - `lifeTimeExceeded', which indicates that the script
+            exited because a time limit was exceeded;
+
+         - `noResourcesLeft', which indicates that the script
+            exited because it ran out of resources (e.g. memory);
+
+         - `languageError', which indicates that the script exited
+            because of a language error (e.g. a syntax error in an
+            interpreted language);
+
+         - `runtimeError', which indicates that the script exited
+            due to a runtime error (e.g. a division by zero);
+
+         - `invalidArgument', which indicates that the script could
+            not be run because of invalid script arguments;
+
+         - `securityViolation', which indicates that the script
+            exited due to a security violation;
+
+         - `genericError', which indicates that the script exited
+            for an unspecified reason.
+
+         If the script has not yet begun running, or is currently
+         running, the value will be `noError'."
+    DEFVAL { noError }
+    ::= { smRunEntry 7 }
+
+smRunResult OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The result value produced by the running script. Note that
+         the result may change while the script is executing."
+    DEFVAL { ''H }
+    ::= { smRunEntry 8 }
+
+smRunControl OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    abort(1),
+                    suspend(2),
+                    resume(3),
+                    nop(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the desired status of the
+         script execution defined by this row.
+
+         Setting this object to `abort' will abort execution if the
+
+         value of smRunState is `initializing', `executing',
+         `suspending', `suspended' or `resuming'. Setting this object
+         to `abort' when the value of smRunState is `aborting' or
+         `terminated', or if the implementation can determine that
+         the attempt to abort the execution would fail, will result
+         in an inconsistentValue error.
+
+         Setting this object to `suspend' will suspend execution
+         if the value of smRunState is `executing'. Setting this
+         object to `suspend' will cause an inconsistentValue error
+         if the value of smRunState is not `executing' or if the
+         implementation can determine that the attempt to suspend
+         the execution would fail.
+
+         Setting this object to `resume' will resume execution
+         if the value of smRunState is `suspending' or
+         `suspended'. Setting this object to `resume' will cause an
+         inconsistentValue error if the value of smRunState is
+         not `suspended' or if the implementation can determine
+         that the attempt to resume the execution would fail.
+
+         Setting this object to nop(4) has no effect."
+    DEFVAL { nop }
+    ::= { smRunEntry 9 }
+
+smRunState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    initializing(1),
+                    executing(2),
+                    suspending(3),
+                    suspended(4),
+                    resuming(5),
+                    aborting(6),
+                    terminated(7)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the script's execution
+         state. If the script has been invoked but has not yet
+         begun execution, the value will be `initializing'. If the
+         script is running, the value will be `executing'.
+
+         A running script which received a request to suspend
+         execution first transitions into a temporary `suspending'
+         state.  The temporary `suspending' state changes to
+         `suspended' when the script has actually been suspended. The
+         temporary `suspending' state changes back to `executing' if
+
+         the attempt to suspend the running script fails.
+
+         A suspended script which received a request to resume
+         execution first transitions into a temporary `resuming'
+         state. The temporary `resuming' state changes to `running'
+         when the script has actually been resumed. The temporary
+         `resuming' state changes back to `suspended' if the attempt
+         to resume the suspended script fails.
+
+         A script which received a request to abort execution but
+         which is still running first transitions into a temporary
+         `aborting' state.
+
+         A script which has finished its execution is `terminated'."
+    ::= { smRunEntry 10 }
+
+smRunError OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a descriptive error message if the
+         script startup or execution raised an abnormal condition.
+         An implementation must store a descriptive error message
+         in this object if the script exits with the smRunExitCode
+         `genericError'."
+    DEFVAL { ''H }
+    ::= { smRunEntry 11 }
+
+smRunResultTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the smRunResult was last updated.
+         The value '0000000000000000'H is returned if smRunResult
+         has not yet been updated after the creation of this
+         smRunTable entry."
+    DEFVAL { '0000000000000000'H }
+    ::= { smRunEntry 12 }
+
+smRunErrorTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the smRunError was last updated.
+         The value '0000000000000000'H is returned if smRunError
+
+         has not yet been updated after the creation of this
+         smRunTable entry."
+    DEFVAL { '0000000000000000'H }
+    ::= { smRunEntry 13 }
+
+--
+-- Notifications. The definition of smTraps makes notification
+-- registrations reversible (see STD 58, RFC 2578).
+--
+
+smTraps OBJECT IDENTIFIER ::= { smNotifications 0 }
+
+smScriptAbort NOTIFICATION-TYPE
+    OBJECTS     { smRunExitCode, smRunEndTime, smRunError }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated whenever a running script
+         terminates with an smRunExitCode unequal to `noError'."
+    ::= { smTraps 1 }
+
+smScriptResult NOTIFICATION-TYPE
+    OBJECTS     { smRunResult }
+    STATUS      current
+    DESCRIPTION
+        "This notification can be used by scripts to notify other
+         management applications about results produced by the
+         script.
+
+         This notification is not automatically generated by the
+         Script MIB implementation. It is the responsibility of
+         the executing script to emit this notification where it
+         is appropriate to do so."
+    ::= { smTraps 2 }
+
+smScriptException NOTIFICATION-TYPE
+    OBJECTS     { smRunError }
+    STATUS      current
+    DESCRIPTION
+        "This notification can be used by scripts to notify other
+         management applications about script errors.
+
+         This notification is not automatically generated by the
+         Script MIB implementation. It is the responsibility of
+         the executing script or the runtime system to emit this
+         notification where it is appropriate to do so."
+    ::= { smTraps 3 }
+
+-- conformance information
+
+smCompliances OBJECT IDENTIFIER ::= { smConformance 1 }
+smGroups      OBJECT IDENTIFIER ::= { smConformance 2 }
+
+-- compliance statements
+
+smCompliance2 MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which implement
+         the Script MIB."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+            smLanguageGroup, smScriptGroup2, smLaunchGroup2,
+            smRunGroup2, smNotificationsGroup2
+    }
+    GROUP   smCodeGroup
+    DESCRIPTION
+        "The smCodeGroup is mandatory only for those implementations
+         that support the downloading of scripts via SNMP."
+    OBJECT  smScriptSource
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "The smScriptSource object is read-only for implementations
+         that are not able to download script code from a URL."
+    OBJECT smCodeText
+    DESCRIPTION
+        "A compliant implementation need only support write access to
+         the smCodeText object only during row creation."
+    OBJECT smLaunchArgument
+    DESCRIPTION
+        "A compliant implementation has to support a minimum size
+         for smLaunchArgument of 255 octets."
+    OBJECT smRunArgument
+    DESCRIPTION
+        "A compliant implementation has to support a minimum size
+         for smRunArgument of 255 octets."
+    OBJECT smRunResult
+    DESCRIPTION
+        "A compliant implementation has to support a minimum size
+         for smRunResult of 255 octets."
+    OBJECT smRunState
+    DESCRIPTION
+        "A compliant implementation does not have to support script
+         suspension and the smRunState `suspended'. Such an
+         implementation will change into the `suspending' state
+         when the smRunControl is set to `suspend' and remain in this
+         state until smRunControl is set to `resume' or the script
+         terminates."
+    ::= { smCompliances 2 }
+
+smLanguageGroup OBJECT-GROUP
+    OBJECTS {
+        smLangLanguage, smLangVersion,
+        smLangVendor, smLangRevision,
+        smLangDescr, smExtsnExtension,
+        smExtsnVersion, smExtsnVendor,
+        smExtsnRevision, smExtsnDescr
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about the
+         capabilities of the scripting engine."
+    ::= { smGroups 1 }
+
+smScriptGroup2 OBJECT-GROUP
+    OBJECTS {
+        smScriptDescr, smScriptLanguage,
+        smScriptSource, smScriptAdminStatus,
+        smScriptOperStatus, smScriptStorageType,
+        smScriptRowStatus, smScriptError,
+        smScriptLastChange
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         installed scripts."
+    ::= { smGroups 7 }
+
+smCodeGroup OBJECT-GROUP
+    OBJECTS {
+        smCodeText, smCodeRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects used to download or modify scripts
+         by using SNMP set requests."
+    ::= { smGroups 3 }
+
+smLaunchGroup2 OBJECT-GROUP
+    OBJECTS {
+        smLaunchScriptOwner, smLaunchScriptName,
+        smLaunchArgument, smLaunchMaxRunning,
+        smLaunchMaxCompleted, smLaunchLifeTime,
+        smLaunchExpireTime, smLaunchStart,
+        smLaunchControl, smLaunchAdminStatus,
+        smLaunchOperStatus, smLaunchRunIndexNext,
+        smLaunchStorageType, smLaunchRowStatus,
+        smLaunchError, smLaunchLastChange,
+        smLaunchRowExpireTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about scripts
+         that can be launched."
+    ::= { smGroups 8 }
+
+smRunGroup2 OBJECT-GROUP
+    OBJECTS {
+        smRunArgument, smRunStartTime,
+        smRunEndTime, smRunLifeTime,
+        smRunExpireTime, smRunExitCode,
+        smRunResult, smRunState,
+        smRunControl, smRunError,
+        smRunResultTime, smRunErrorTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about running
+         scripts."
+    ::= { smGroups 9 }
+
+smNotificationsGroup2 NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        smScriptAbort,
+        smScriptResult,
+        smScriptException
+    }
+    STATUS      current
+    DESCRIPTION
+        "The notifications emitted by the Script MIB."
+    ::= { smGroups 10 }
+
+--
+-- Deprecated compliance and conformance group definitions
+-- from RFC 2592.
+--
+
+smCompliance MODULE-COMPLIANCE
+    STATUS      deprecated
+    DESCRIPTION
+        "The compliance statement for SNMP entities which implement
+         the Script MIB."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+
+            smLanguageGroup, smScriptGroup, smLaunchGroup, smRunGroup
+    }
+    GROUP   smCodeGroup
+    DESCRIPTION
+        "The smCodeGroup is mandatory only for those implementations
+         that support the downloading of scripts via SNMP."
+    OBJECT  smScriptSource
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "The smScriptSource object is read-only for implementations
+         that are not able to download script code from a URL."
+    OBJECT smCodeText
+    DESCRIPTION
+        "A compliant implementation need only support write access
+         to the smCodeText object during row creation."
+    OBJECT smLaunchArgument
+    DESCRIPTION
+        "A compliant implementation has to support a minimum size
+         for smLaunchArgument of 255 octets."
+    OBJECT smRunArgument
+    DESCRIPTION
+        "A compliant implementation has to support a minimum size
+         for smRunArgument of 255 octets."
+    OBJECT smRunResult
+    DESCRIPTION
+        "A compliant implementation has to support a minimum size
+         for smRunResult of 255 octets."
+    OBJECT smRunState
+    DESCRIPTION
+        "A compliant implementation does not have to support script
+         suspension and the smRunState `suspended'. Such an
+         implementation will change into the `suspending' state
+         when the smRunControl is set to `suspend' and remain in this
+         state until smRunControl is set to `resume' or the script
+         terminates."
+    ::= { smCompliances 1 }
+
+smScriptGroup OBJECT-GROUP
+    OBJECTS {
+        smScriptDescr, smScriptLanguage,
+        smScriptSource, smScriptAdminStatus,
+        smScriptOperStatus, smScriptStorageType,
+        smScriptRowStatus
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "A collection of objects providing information about
+         installed scripts."
+    ::= { smGroups 2 }
+
+smLaunchGroup OBJECT-GROUP
+    OBJECTS {
+        smLaunchScriptOwner, smLaunchScriptName,
+        smLaunchArgument, smLaunchMaxRunning,
+        smLaunchMaxCompleted, smLaunchLifeTime,
+        smLaunchExpireTime, smLaunchStart,
+        smLaunchControl, smLaunchAdminStatus,
+        smLaunchOperStatus, smLaunchRunIndexNext,
+        smLaunchStorageType, smLaunchRowStatus
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "A collection of objects providing information about scripts
+         that can be launched."
+    ::= { smGroups 4 }
+
+smRunGroup OBJECT-GROUP
+    OBJECTS {
+        smRunArgument, smRunStartTime,
+        smRunEndTime, smRunLifeTime,
+        smRunExpireTime, smRunExitCode,
+        smRunResult, smRunState,
+        smRunControl, smRunError
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "A collection of objects providing information about running
+         scripts."
+    ::= { smGroups 5 }
+
+smNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        smScriptAbort,
+        smScriptResult
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "The notifications emitted by the Script MIB."
+    ::= { smGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/DISMAN-TRACEROUTE-MIB.mib b/snmp_builder/mibs/DISMAN-TRACEROUTE-MIB.mib
new file mode 100644
index 0000000..d207b24
--- /dev/null
+++ b/snmp_builder/mibs/DISMAN-TRACEROUTE-MIB.mib
@@ -0,0 +1,1850 @@
+DISMAN-TRACEROUTE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+    Gauge32, Unsigned32, mib-2,
+    NOTIFICATION-TYPE,
+    OBJECT-IDENTITY
+        FROM SNMPv2-SMI                  -- RFC2578
+    RowStatus, StorageType,
+    TruthValue, DateAndTime
+        FROM SNMPv2-TC                   -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- RFC2580
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- RFC3411
+    InterfaceIndexOrZero                 -- RFC2863
+        FROM IF-MIB
+    InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB            -- RFC4001
+    OperationResponseStatus
+        FROM DISMAN-PING-MIB;            -- RFC4560
+
+ traceRouteMIB MODULE-IDENTITY
+    LAST-UPDATED "200606130000Z"         -- 13 June 2006
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO
+        "Juergen Quittek
+
+        NEC Europe Ltd.
+        Network Laboratories
+        Kurfuersten-Anlage 36
+        69115 Heidelberg
+        Germany
+
+        Phone: +49 6221 4342-115
+        Email: quittek@netlab.nec.de"
+    DESCRIPTION
+        "The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides
+        access to the traceroute capability at a remote host.
+
+        Copyright (C) The Internet Society (2006). This version of
+        this MIB module is part of RFC 4560; see the RFC itself for
+        full legal notices."
+
+     --  Revision history
+
+     REVISION     "200606130000Z"         -- 13 June 2006
+     DESCRIPTION
+         "Updated version, published as RFC 4560.
+             - Correctly considered IPv6 in DESCRIPTION clause of
+               object traceRouteCtlDataSize
+             - Replaced references to RFC 2575 by RFC 3415
+             - Replaced references to RFC 2571 by RFC 3411
+             - Replaced references to RFC 2851 by RFC 4001
+             - Clarified DESCRIPTION clause of object
+               traceRouteResultsLastGoodPath
+             - Changed range of object traceRouteCtlInitialTtl
+               from (0..255) to (1..255)
+             - Extended DESCRIPTION clause of traceRouteResultsTable
+               describing re-initialization of entries
+             - Changed SYNTAX of traceRouteResultsTestAttempts and
+               traceRouteResultsTestSuccesses from Unsigned32 to
+               Gauge32
+             - Changed status of traceRouteCompliance to deprecated
+             - Added traceRouteFullCompliance and
+               traceRouteMinimumCompliance
+             - Changed status of traceRouteGroup and
+               traceRouteTimeStampGroup to deprecated
+             - Added traceRouteMinimumGroup,
+               traceRouteCtlRowStatusGroup, and
+               traceRouteHistoryGroup
+             - Changed DEFVAL of object
+               traceRouteCtlTargetAddressType from { ipv4 }
+               to { unknown }
+             - Changed DEFVAL of object traceRouteCtlDescr
+               from { '00'H } to { ''H }
+             - Added DEFVAL for object traceRouteCtlTrapGeneration
+               of DEFVAL { { } }"
+     REVISION     "200009210000Z"         -- 21 September 2000
+     DESCRIPTION
+         "Initial version, published as RFC 2925."
+    ::= { mib-2 81 }
+
+ -- Top level structure of the MIB
+
+ traceRouteNotifications  OBJECT IDENTIFIER ::= { traceRouteMIB 0 }
+ traceRouteObjects        OBJECT IDENTIFIER ::= { traceRouteMIB 1 }
+ traceRouteConformance    OBJECT IDENTIFIER ::= { traceRouteMIB 2 }
+
+ -- The registration node (point) for traceroute implementation types
+
+ traceRouteImplementationTypeDomains OBJECT IDENTIFIER
+ ::= { traceRouteMIB 3 }
+
+ traceRouteUsingUdpProbes OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "Indicates that an implementation is using UDP probes to
+        perform the traceroute operation."
+    ::= { traceRouteImplementationTypeDomains 1 }
+
+ -- Simple Object Definitions
+
+ traceRouteMaxConcurrentRequests OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "requests"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The maximum number of concurrent active traceroute requests
+       that are allowed within an agent implementation.  A value
+       of 0 for this object implies that there is no limit for
+       the number of concurrent active requests in effect.
+
+       The limit applies only to new requests being activated.
+       When a new value is set, the agent will continue processing
+       all the requests already active, even if their number
+       exceeds the limit just imposed."
+    DEFVAL { 10 }
+    ::= { traceRouteObjects 1 }
+
+  -- Traceroute Control Table
+
+ traceRouteCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TraceRouteCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Remote Operations Traceroute Control Table for
+        providing the capability of invoking traceroute from a remote
+        host.  The results of traceroute operations can be stored in
+        the traceRouteResultsTable, traceRouteProbeHistoryTable, and
+        the traceRouteHopsTable."
+   ::= { traceRouteObjects 2 }
+
+ traceRouteCtlEntry OBJECT-TYPE
+    SYNTAX      TraceRouteCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the traceRouteCtlTable.  The first
+        index element, traceRouteCtlOwnerIndex, is of type
+        SnmpAdminString, a textual convention that allows for
+        use of the SNMPv3 View-Based Access Control Model
+        (RFC 3415, VACM) and that allows a management
+        application to identify its entries.  The second index,
+        traceRouteCtlTestName (also an SnmpAdminString),
+        enables the same management application to have
+        multiple requests outstanding."
+    INDEX {
+            traceRouteCtlOwnerIndex,
+            traceRouteCtlTestName
+          }
+    ::= { traceRouteCtlTable 1 }
+
+ TraceRouteCtlEntry ::=
+    SEQUENCE {
+      traceRouteCtlOwnerIndex         SnmpAdminString,
+      traceRouteCtlTestName           SnmpAdminString,
+      traceRouteCtlTargetAddressType  InetAddressType,
+      traceRouteCtlTargetAddress      InetAddress,
+      traceRouteCtlByPassRouteTable   TruthValue,
+      traceRouteCtlDataSize           Unsigned32,
+      traceRouteCtlTimeOut            Unsigned32,
+      traceRouteCtlProbesPerHop       Unsigned32,
+      traceRouteCtlPort               Unsigned32,
+      traceRouteCtlMaxTtl             Unsigned32,
+      traceRouteCtlDSField            Unsigned32,
+      traceRouteCtlSourceAddressType  InetAddressType,
+      traceRouteCtlSourceAddress      InetAddress,
+      traceRouteCtlIfIndex            InterfaceIndexOrZero,
+      traceRouteCtlMiscOptions        SnmpAdminString,
+      traceRouteCtlMaxFailures        Unsigned32,
+      traceRouteCtlDontFragment       TruthValue,
+      traceRouteCtlInitialTtl         Unsigned32,
+      traceRouteCtlFrequency          Unsigned32,
+      traceRouteCtlStorageType        StorageType,
+      traceRouteCtlAdminStatus        INTEGER,
+      traceRouteCtlDescr              SnmpAdminString,
+      traceRouteCtlMaxRows            Unsigned32,
+      traceRouteCtlTrapGeneration     BITS,
+      traceRouteCtlCreateHopsEntries  TruthValue,
+      traceRouteCtlType               OBJECT IDENTIFIER,
+      traceRouteCtlRowStatus          RowStatus
+    }
+
+ traceRouteCtlOwnerIndex OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "To facilitate the provisioning of access control by a
+       security administrator using the View-Based Access
+       Control Model (RFC 3415, VACM) for tables in which
+       multiple users may need to create or
+       modify entries independently, the initial index is used as
+       an 'owner index'.  Such an initial index has a syntax of
+       SnmpAdminString and can thus be trivially mapped to a
+       securityName or groupName defined in VACM, in
+       accordance with a security policy.
+
+       When used in conjunction with such a security policy,
+       all entries in the table belonging to a particular user
+       (or group) will have the same value for this initial
+       index.  For a given user's entries in a particular
+       table, the object identifiers for the information in
+       these entries will have the same subidentifiers (except
+       for the 'column' subidentifier) up to the end of the
+       encoded owner index. To configure VACM to permit access
+       to this portion of the table, one would create
+       vacmViewTreeFamilyTable entries with the value of
+       vacmViewTreeFamilySubtree including the owner index
+       portion, and vacmViewTreeFamilyMask 'wildcarding' the
+       column subidentifier.  More elaborate configurations
+       are possible."
+    ::= { traceRouteCtlEntry 1 }
+
+  traceRouteCtlTestName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a traceroute test.  This is locally unique,
+        within the scope of a traceRouteCtlOwnerIndex."
+    ::= { traceRouteCtlEntry 2 }
+
+ traceRouteCtlTargetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of host address to be used on the
+        traceroute request at the remote host."
+    DEFVAL { unknown }
+    ::= { traceRouteCtlEntry 3 }
+
+ traceRouteCtlTargetAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the host address used on the
+        traceroute request at the remote host.  The
+        host address type can be determined by
+        examining the value of the corresponding
+        traceRouteCtlTargetAddressType.
+
+        A value for this object MUST be set prior to
+        transitioning its corresponding traceRouteCtlEntry to
+        active(1) via traceRouteCtlRowStatus."
+    ::= { traceRouteCtlEntry 4 }
+
+ traceRouteCtlByPassRouteTable OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The purpose of this object is to enable optional
+       bypassing the route table.  If enabled, the remote
+       host will bypass the normal routing tables and send
+       directly to a host on an attached network.  If the
+       host is not on a directly attached network, an
+       error is returned.  This option can be used to perform
+       the traceroute operation to a local host through an
+       interface that has no route defined (e.g., after the
+       interface was dropped by the routing daemon at the host)."
+    DEFVAL { false }
+    ::= { traceRouteCtlEntry 5 }
+
+ traceRouteCtlDataSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65507)
+    UNITS       "octets"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the size of the data portion of a traceroute
+        request, in octets.  If the RECOMMENDED traceroute method
+        (UDP datagrams as probes) is used, then the value
+        contained in this object MUST be applied.  If another
+        traceroute method is used for which the specified size
+        is not appropriate, then the implementation SHOULD use
+        whatever size (appropriate to the method) is closest to
+        the specified size.
+
+        The maximum value for this object was computed by
+        subtracting the smallest possible IP header size of
+        20 octets (IPv4 header with no options) and the UDP
+        header size of 8 octets from the maximum IP packet size.
+        An IP packet has a maximum size of 65535 octets
+        (excluding IPv6 Jumbograms)."
+    DEFVAL { 0 }
+    ::= { traceRouteCtlEntry 6 }
+
+ traceRouteCtlTimeOut OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the time-out value, in seconds, for
+        a traceroute request."
+    DEFVAL { 3 }
+    ::= { traceRouteCtlEntry 7 }
+
+ traceRouteCtlProbesPerHop OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    UNITS       "probes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the number of times to reissue a traceroute
+        request with the same time-to-live (TTL) value."
+    DEFVAL { 3 }
+    ::= { traceRouteCtlEntry 8 }
+
+ traceRouteCtlPort OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    UNITS       "UDP Port"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the (initial) UDP port to send the traceroute
+        request to.  A port needs to be specified that is not in
+        use at the destination (target) host.  The default
+        value for this object is the IANA assigned port,
+        33434, for the traceroute function."
+    DEFVAL { 33434 }
+    ::= { traceRouteCtlEntry 9 }
+
+ traceRouteCtlMaxTtl OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    UNITS       "time-to-live value"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the maximum time-to-live value."
+    DEFVAL { 30 }
+    ::= { traceRouteCtlEntry 10 }
+
+ traceRouteCtlDSField OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the value to store in the Type of Service
+        (TOS) octet in the IPv4 header or in the Traffic
+        Class octet in the IPv6 header, respectively, of the
+        IP packet used to encapsulate the traceroute probe.
+
+        The octet to be set in the IP header contains the
+        Differentiated Services (DS) Field in the six most
+        significant bits.
+
+        This option can be used to determine what effect an
+        explicit DS Field setting has on a traceroute response.
+        Not all values are legal or meaningful.  A value of 0
+        means that the function represented by this option is
+        not supported.  DS Field usage is often not supported
+        by IP implementations, and not all values are supported.
+        Refer to RFC 2474 and RFC 3260 for guidance on usage of
+        this field."
+    REFERENCE
+        "Refer to RFC 1812 for the definition of the IPv4 TOS
+        octet and to RFC 2460 for the definition of the IPv6
+        Traffic Class octet.  Refer to RFC 2474 and RFC 3260
+        for the definition of the Differentiated Services Field."
+    DEFVAL { 0 }
+    ::= { traceRouteCtlEntry 11 }
+
+ traceRouteCtlSourceAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type of the source address,
+        traceRouteCtlSourceAddress, to be used at a remote host
+        when a traceroute operation is performed."
+    DEFVAL { unknown }
+    ::= { traceRouteCtlEntry 12 }
+
+ traceRouteCtlSourceAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Use the specified IP address (which must be given as an
+        IP number, not a hostname) as the source address in
+        outgoing probe packets.  On hosts with more than one IP
+        address, this option can be used to select the address
+        to be used.  If the IP address is not one of this
+        machine's interface addresses, an error is returned, and
+        nothing is sent.  A zero-length octet string value for
+        this object disables source address specification.
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of traceRouteCtlSourceAddressType."
+    DEFVAL { ''H }
+    ::= { traceRouteCtlEntry 13 }
+
+ traceRouteCtlIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Setting this object to an interface's ifIndex prior
+        to starting a remote traceroute operation directs
+        the traceroute probes to be transmitted over the
+        specified interface.  A value of zero for this object
+        implies that this option is not enabled."
+    DEFVAL { 0 }
+    ::= { traceRouteCtlEntry 14 }
+
+ traceRouteCtlMiscOptions OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Enables an application to specify implementation-dependent
+        options."
+    DEFVAL { ''H }
+    ::= { traceRouteCtlEntry 15 }
+
+ traceRouteCtlMaxFailures OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    UNITS       "timeouts"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the maximum number
+        of consecutive timeouts allowed before a remote traceroute
+        request is terminated.  A value of either 255 (maximum
+        hop count/possible TTL value) or 0 indicates that the
+        function of terminating a remote traceroute request when a
+        specific number of consecutive timeouts are detected is
+        disabled."
+    DEFVAL { 5 }
+    ::= { traceRouteCtlEntry 16 }
+
+ traceRouteCtlDontFragment OBJECT-TYPE
+    SYNTAX         TruthValue
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+        "This object enables setting of the don't fragment flag (DF)
+        in the IP header for a probe.  Use of this object enables
+        a manual PATH MTU test is performed."
+    DEFVAL  { false }
+    ::= { traceRouteCtlEntry 17 }
+
+ traceRouteCtlInitialTtl OBJECT-TYPE
+    SYNTAX         Unsigned32 (1..255)
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+        "The value of this object specifies the initial TTL value to
+        use.  This enables bypassing the initial (often well known)
+        portion of a path."
+    DEFVAL { 1 }
+    ::= { traceRouteCtlEntry 18 }
+
+ traceRouteCtlFrequency  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of seconds to wait before repeating a
+        traceroute test, as defined by the value of the
+        various objects in the corresponding row.
+
+        After a single test is completed the number of seconds
+        as defined by the value of traceRouteCtlFrequency MUST
+        elapse before the next traceroute test is started.
+
+        A value of 0 for this object implies that the test
+        as defined by the corresponding entry will not be
+
+        repeated."
+    DEFVAL { 0 }
+    ::= { traceRouteCtlEntry 19 }
+
+ traceRouteCtlStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent' need not
+        allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { traceRouteCtlEntry 20 }
+
+ traceRouteCtlAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+
+                          enabled(1), -- operation should be started
+                          disabled(2) -- operation should be stopped
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Reflects the desired state that an traceRouteCtlEntry
+        should be in:
+
+           enabled(1)  - Attempt to activate the test as defined by
+                         this traceRouteCtlEntry.
+           disabled(2) - Deactivate the test as defined by this
+                         traceRouteCtlEntry.
+
+        Refer to the corresponding traceRouteResultsOperStatus to
+        determine the operational state of the test defined by
+        this entry."
+     DEFVAL { disabled }
+    ::= { traceRouteCtlEntry 21 }
+
+ traceRouteCtlDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The purpose of this object is to provide a
+        descriptive name of the remote traceroute
+        test."
+    DEFVAL { ''H }
+    ::= { traceRouteCtlEntry 22 }
+
+ traceRouteCtlMaxRows OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "rows"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of corresponding entries allowed
+        in the traceRouteProbeHistoryTable.  An implementation
+        of this MIB will remove the oldest corresponding entry
+        in the traceRouteProbeHistoryTable to allow the
+        addition of an new entry once the number of
+        corresponding rows in the traceRouteProbeHistoryTable
+        reaches this value.
+
+        Old entries are not removed when a new test is
+        started.  Entries are added to the
+        traceRouteProbeHistoryTable until traceRouteCtlMaxRows
+        is reached before entries begin to be removed.
+        A value of 0 for this object disables creation of
+        traceRouteProbeHistoryTable entries."
+    DEFVAL      { 50 }
+    ::= { traceRouteCtlEntry 23 }
+
+ traceRouteCtlTrapGeneration OBJECT-TYPE
+    SYNTAX      BITS {
+                  pathChange(0),
+                  testFailure(1),
+                  testCompletion(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object determines when and whether to
+        generate a notification for this entry:
+
+        pathChange(0)     - Generate a traceRoutePathChange
+            notification when the current path varies from a
+            previously determined path.
+        testFailure(1)    - Generate a traceRouteTestFailed
+            notification when the full path to a target
+            can't be determined.
+        testCompletion(2) - Generate a traceRouteTestCompleted
+            notification when the path to a target has been
+            determined.
+
+        The value of this object defaults to an empty set,
+        indicating that none of the above options has been
+        selected."
+    DEFVAL { { } }
+    ::= { traceRouteCtlEntry 24 }
+
+ traceRouteCtlCreateHopsEntries OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The current path for a traceroute test is kept in the
+        traceRouteHopsTable on a per-hop basis when the value of
+        this object is true(1)."
+    DEFVAL { false }
+    ::= { traceRouteCtlEntry 25 }
+
+ traceRouteCtlType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is used either to report or to
+        select the implementation method to be used for
+        performing a traceroute operation.  The value of this
+        object may be selected from
+        traceRouteImplementationTypeDomains.
+
+        Additional implementation types should be allocated as
+        required by implementers of the DISMAN-TRACEROUTE-MIB
+        under their enterprise specific registration point,
+        not beneath traceRouteImplementationTypeDomains."
+    DEFVAL { traceRouteUsingUdpProbes }
+    ::= { traceRouteCtlEntry 26 }
+
+ traceRouteCtlRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the traceRouteCtlTable.  Deletion of an entry in
+        this table results in a deletion of all corresponding (same
+        traceRouteCtlOwnerIndex and traceRouteCtlTestName
+        index values) traceRouteResultsTable,
+        traceRouteProbeHistoryTable, and traceRouteHopsTable
+        entries.
+
+        A value MUST be specified for traceRouteCtlTargetAddress
+        prior to acceptance of a transition to active(1) state.
+
+        When a value for pingCtlTargetAddress is set,
+        the value of object pingCtlRowStatus changes
+        from notReady(3) to notInService(2).
+
+        Activation of a remote traceroute operation is
+        controlled via traceRouteCtlAdminStatus, and not
+        by transitioning of this object's value to active(1).
+
+        Transitions in and out of active(1) state are not
+        allowed while an entry's traceRouteResultsOperStatus
+        is active(1), with the exception that deletion of
+        an entry in this table by setting its RowStatus
+        object to destroy(6) will stop an active
+        traceroute operation.
+
+        The operational state of an traceroute operation
+        can be determined by examination of the corresponding
+        traceRouteResultsOperStatus object."
+    REFERENCE
+        "See definition of RowStatus in RFC 2579, 'Textual
+        Conventions for SMIv2.'"
+    ::= { traceRouteCtlEntry 27 }
+
+ -- Traceroute Results Table
+
+ traceRouteResultsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TraceRouteResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Remote Operations Traceroute Results Table for
+        keeping track of the status of a traceRouteCtlEntry.
+
+        An entry is added to the traceRouteResultsTable when an
+        traceRouteCtlEntry is started by successful transition
+        of its traceRouteCtlAdminStatus object to enabled(1).
+
+        If the object traceRouteCtlAdminStatus already has the value
+        enabled(1), and if the corresponding
+        traceRouteResultsOperStatus object has the value
+        completed(3), then successfully writing enabled(1) to the
+        object traceRouteCtlAdminStatus re-initializes the already
+        existing entry in the traceRouteResultsTable.  The values of
+        objects in the re-initialized entry are the same as
+        the values of objects in a new entry would be.
+
+        An entry is removed from the traceRouteResultsTable when
+
+        its corresponding traceRouteCtlEntry is deleted."
+   ::= { traceRouteObjects 3 }
+
+ traceRouteResultsEntry OBJECT-TYPE
+    SYNTAX      TraceRouteResultsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the traceRouteResultsTable.  The
+        traceRouteResultsTable has the same indexing as the
+        traceRouteCtlTable so that a traceRouteResultsEntry
+        corresponds to the traceRouteCtlEntry that caused it to
+        be created."
+    INDEX {
+            traceRouteCtlOwnerIndex,
+            traceRouteCtlTestName
+          }
+    ::= { traceRouteResultsTable 1 }
+
+ TraceRouteResultsEntry ::=
+    SEQUENCE {
+      traceRouteResultsOperStatus       INTEGER,
+      traceRouteResultsCurHopCount      Gauge32,
+      traceRouteResultsCurProbeCount    Gauge32,
+      traceRouteResultsIpTgtAddrType    InetAddressType,
+      traceRouteResultsIpTgtAddr        InetAddress,
+      traceRouteResultsTestAttempts     Gauge32,
+      traceRouteResultsTestSuccesses    Gauge32,
+      traceRouteResultsLastGoodPath     DateAndTime
+    }
+
+ traceRouteResultsOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          enabled(1),  -- test is in progress
+                          disabled(2), -- test has stopped
+                          completed(3) -- test is completed
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects the operational state of an traceRouteCtlEntry:
+
+           enabled(1)   - Test is active.
+           disabled(2)  - Test has stopped.
+           completed(3) - Test is completed."
+    ::= { traceRouteResultsEntry 1 }
+
+ traceRouteResultsCurHopCount OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "hops"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects the current TTL value (from 1 to
+        255) for a remote traceroute operation.
+        Maximum TTL value is determined by
+        traceRouteCtlMaxTtl."
+    ::= { traceRouteResultsEntry 2 }
+
+ traceRouteResultsCurProbeCount OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "probes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Reflects the current probe count (1..10) for
+        a remote traceroute operation.  The maximum
+        probe count is determined by
+        traceRouteCtlProbesPerHop."
+    ::= { traceRouteResultsEntry 3 }
+
+ traceRouteResultsIpTgtAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the type of address stored
+        in the corresponding traceRouteResultsIpTgtAddr
+        object."
+    ::= { traceRouteResultsEntry 4 }
+
+ traceRouteResultsIpTgtAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object reports the IP address associated
+        with a traceRouteCtlTargetAddress value when the
+        destination address is specified as a DNS name.
+        The value of this object should be a zero-length
+        octet string when a DNS name is not specified or
+        when a specified DNS name fails to resolve."
+    ::= { traceRouteResultsEntry 5 }
+
+ traceRouteResultsTestAttempts OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "tests"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current number of attempts to determine a path
+        to a target.  The value of this object MUST be started
+        at 0."
+    ::= { traceRouteResultsEntry 6 }
+
+ traceRouteResultsTestSuccesses OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "tests"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current number of attempts to determine a path
+        to a target that have succeeded.  The value of this
+        object MUST be reported as 0 when no attempts have
+        succeeded."
+    ::= { traceRouteResultsEntry 7 }
+
+ traceRouteResultsLastGoodPath OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the last complete path
+        was determined.  A path is complete if responses
+        were received or timeout occurred for each hop on
+        the path; i.e., for each TTL value from the value
+        of the corresponding traceRouteCtlInitialTtl object
+        up to the end of the path or (if no reply from the
+        target IP address was received) up to the value of
+        the corresponding traceRouteCtlMaxTtl object."
+    ::= { traceRouteResultsEntry 8 }
+
+ -- Trace Route Probe History Table
+
+ traceRouteProbeHistoryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TraceRouteProbeHistoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Remote Operations Traceroute Results Table
+        for storing the results of a traceroute operation.
+
+        An implementation of this MIB will remove the oldest
+
+        entry in the traceRouteProbeHistoryTable of the
+        corresponding entry in the traceRouteCtlTable to allow
+        the addition of a new entry once the number of rows in
+        the traceRouteProbeHistoryTable reaches the value specified
+        by traceRouteCtlMaxRows for the corresponding entry in the
+        traceRouteCtlTable."
+   ::= { traceRouteObjects 4 }
+
+ traceRouteProbeHistoryEntry OBJECT-TYPE
+    SYNTAX      TraceRouteProbeHistoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a table for storing the results of a traceroute
+        operation.  Entries in this table are limited by
+        the value of the corresponding traceRouteCtlMaxRows
+        object.
+
+        The first two index elements identify the
+        traceRouteCtlEntry that a traceRouteProbeHistoryEntry
+        belongs to.  The third index element selects a single
+        traceroute operation result.  The fourth and fifth indexes
+        select the hop and the probe for a particular
+        traceroute operation."
+    INDEX {
+             traceRouteCtlOwnerIndex,
+             traceRouteCtlTestName,
+             traceRouteProbeHistoryIndex,
+             traceRouteProbeHistoryHopIndex,
+             traceRouteProbeHistoryProbeIndex
+
+          }
+    ::= { traceRouteProbeHistoryTable 1 }
+
+ TraceRouteProbeHistoryEntry ::=
+    SEQUENCE {
+      traceRouteProbeHistoryIndex         Unsigned32,
+      traceRouteProbeHistoryHopIndex      Unsigned32,
+      traceRouteProbeHistoryProbeIndex    Unsigned32,
+      traceRouteProbeHistoryHAddrType     InetAddressType,
+      traceRouteProbeHistoryHAddr         InetAddress,
+      traceRouteProbeHistoryResponse      Unsigned32,
+      traceRouteProbeHistoryStatus        OperationResponseStatus,
+      traceRouteProbeHistoryLastRC        Integer32,
+      traceRouteProbeHistoryTime          DateAndTime
+    }
+
+ traceRouteProbeHistoryIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table is created when the result of
+        a traceroute probe is determined.  The initial 2 instance
+        identifier index values identify the traceRouteCtlEntry
+        that a probe result (traceRouteProbeHistoryEntry) belongs
+        to.  An entry is removed from this table when
+        its corresponding traceRouteCtlEntry is deleted.
+
+        An implementation MUST start assigning
+        traceRouteProbeHistoryIndex values at 1 and wrap after
+        exceeding the maximum possible value, as defined by the
+        limit of this object ('ffffffff'h)."
+    ::= { traceRouteProbeHistoryEntry 1 }
+
+ traceRouteProbeHistoryHopIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Indicates which hop in a traceroute path the probe's
+       results are for.  The value of this object is initially
+       determined by the value of traceRouteCtlInitialTtl."
+    ::= { traceRouteProbeHistoryEntry 2 }
+
+ traceRouteProbeHistoryProbeIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Indicates the index of a probe for a particular
+       hop in a traceroute path.  The number of probes per
+       hop is determined by the value of the corresponding
+       traceRouteCtlProbesPerHop object."
+    ::= { traceRouteProbeHistoryEntry 3 }
+
+ traceRouteProbeHistoryHAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This objects indicates the type of address stored
+        in the corresponding traceRouteProbeHistoryHAddr
+        object."
+    ::= { traceRouteProbeHistoryEntry 4 }
+
+ traceRouteProbeHistoryHAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The address of a hop in a traceroute path.  This object
+       is not allowed to be a DNS name.  The value of the
+       corresponding object, traceRouteProbeHistoryHAddrType,
+       indicates this object's IP address type."
+    ::= { traceRouteProbeHistoryEntry 5 }
+
+ traceRouteProbeHistoryResponse OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The amount of time measured in milliseconds from when
+        a probe was sent to when its response was received or
+        when it timed out.  The value of this object is reported
+        as 0 when it is not possible to transmit a probe."
+    ::= { traceRouteProbeHistoryEntry 6 }
+
+ traceRouteProbeHistoryStatus OBJECT-TYPE
+    SYNTAX      OperationResponseStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The result of a traceroute operation made by a remote
+        host for a particular probe."
+    ::= { traceRouteProbeHistoryEntry 7 }
+
+ traceRouteProbeHistoryLastRC OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last implementation-method-specific reply code received.
+
+        Traceroute is usually implemented by transmitting a series of
+        probe packets with increasing time-to-live values.  A probe
+        packet is a UDP datagram encapsulated into an IP packet.
+        Each hop in a path to the target (destination) host rejects
+        the probe packets (probe's TTL too small, ICMP reply) until
+        either the maximum TTL is exceeded or the target host is
+        received."
+    ::= { traceRouteProbeHistoryEntry 8 }
+
+ traceRouteProbeHistoryTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Timestamp for when this probe's results were determined."
+    ::= { traceRouteProbeHistoryEntry 9 }
+
+ -- Traceroute Hop Results Table
+
+ traceRouteHopsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TraceRouteHopsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines the Remote Operations Traceroute Hop Table for
+        keeping track of the results of traceroute tests on a
+        per-hop basis."
+    ::= { traceRouteObjects 5 }
+
+ traceRouteHopsEntry OBJECT-TYPE
+    SYNTAX      TraceRouteHopsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the traceRouteHopsTable.
+        The first two index elements identify the
+        traceRouteCtlEntry that a traceRouteHopsEntry
+        belongs to.  The third index element,
+        traceRouteHopsHopIndex, selects a
+        hop in a traceroute path."
+    INDEX {
+            traceRouteCtlOwnerIndex,
+            traceRouteCtlTestName,
+            traceRouteHopsHopIndex
+          }
+    ::= { traceRouteHopsTable 1 }
+
+ TraceRouteHopsEntry ::=
+    SEQUENCE {
+        traceRouteHopsHopIndex         Unsigned32,
+        traceRouteHopsIpTgtAddressType InetAddressType,
+        traceRouteHopsIpTgtAddress     InetAddress,
+        traceRouteHopsMinRtt           Unsigned32,
+        traceRouteHopsMaxRtt           Unsigned32,
+        traceRouteHopsAverageRtt       Unsigned32,
+        traceRouteHopsRttSumOfSquares  Unsigned32,
+        traceRouteHopsSentProbes       Unsigned32,
+        traceRouteHopsProbeResponses   Unsigned32,
+        traceRouteHopsLastGoodProbe    DateAndTime
+      }
+
+ traceRouteHopsHopIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Specifies the hop index for a traceroute hop.  Values
+        for this object with respect to the same
+        traceRouteCtlOwnerIndex and traceRouteCtlTestName
+        MUST start at 1 and be given increasing values for
+        subsequent hops.  The value of traceRouteHopsHopIndex is not
+        necessarily the number of the hop on the traced path.
+
+        The traceRouteHopsTable keeps the current traceroute
+        path per traceRouteCtlEntry if enabled by
+        setting the corresponding traceRouteCtlCreateHopsEntries
+        to true(1).
+
+        All hops (traceRouteHopsTable entries) in a traceroute
+        path MUST be updated at the same time when a traceroute
+        operation is completed.  Care needs to be applied when a path
+        either changes or can't be determined.  The initial portion
+        of the path, up to the first hop change, MUST retain the
+        same traceRouteHopsHopIndex values.  The remaining portion
+        of the path SHOULD be assigned new traceRouteHopsHopIndex
+        values."
+    ::= { traceRouteHopsEntry 1 }
+
+ traceRouteHopsIpTgtAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the type of address stored
+        in the corresponding traceRouteHopsIpTgtAddress
+        object."
+    ::= { traceRouteHopsEntry 2 }
+
+ traceRouteHopsIpTgtAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object reports the IP address associated with
+
+        the hop.  A value for this object should be reported
+        as a numeric IP address, not as a DNS name.
+
+        The address type (InetAddressType) that relates to
+        this object is specified by the corresponding value
+        of pingCtlSourceAddressType."
+    ::= { traceRouteHopsEntry 3 }
+
+ traceRouteHopsMinRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The minimum traceroute round-trip-time (RTT) received for
+        this hop.  A value of 0 for this object implies that no
+        RTT has been received."
+    ::= { traceRouteHopsEntry 4 }
+
+ traceRouteHopsMaxRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum traceroute round-trip-time (RTT) received for
+        this hop.  A value of 0 for this object implies that no
+        RTT has been received."
+    ::= { traceRouteHopsEntry 5 }
+
+ traceRouteHopsAverageRtt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current average traceroute round-trip-time (RTT) for
+        this hop."
+    ::= { traceRouteHopsEntry 6 }
+
+ traceRouteHopsRttSumOfSquares OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the sum of the squares of all
+        round-trip-times received for this hop.  Its purpose is
+        to enable standard deviation calculation."
+    ::= { traceRouteHopsEntry 7 }
+
+ traceRouteHopsSentProbes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object reflects the number of probes sent
+        for this hop during this traceroute test.  The value of this
+        object should start at 0."
+    ::= { traceRouteHopsEntry 8 }
+
+ traceRouteHopsProbeResponses OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of responses received for this hop during this
+        traceroute test.  This value of this object should start
+        at 0."
+    ::= { traceRouteHopsEntry 9 }
+
+ traceRouteHopsLastGoodProbe OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Date and time at which the last response was received for a
+         probe for this hop during this traceroute test."
+    ::= { traceRouteHopsEntry 10 }
+
+ -- Notification Definition section
+
+ traceRoutePathChange NOTIFICATION-TYPE
+      OBJECTS {
+        traceRouteCtlTargetAddressType,
+        traceRouteCtlTargetAddress,
+        traceRouteResultsIpTgtAddrType,
+        traceRouteResultsIpTgtAddr
+      }
+      STATUS  current
+      DESCRIPTION
+          "The path to a target has changed."
+      ::= { traceRouteNotifications 1 }
+
+ traceRouteTestFailed NOTIFICATION-TYPE
+      OBJECTS {
+        traceRouteCtlTargetAddressType,
+        traceRouteCtlTargetAddress,
+        traceRouteResultsIpTgtAddrType,
+        traceRouteResultsIpTgtAddr
+
+      }
+      STATUS  current
+      DESCRIPTION
+          "Could not determine the path to a target."
+      ::= { traceRouteNotifications 2 }
+
+ traceRouteTestCompleted NOTIFICATION-TYPE
+      OBJECTS {
+        traceRouteCtlTargetAddressType,
+        traceRouteCtlTargetAddress,
+        traceRouteResultsIpTgtAddrType,
+        traceRouteResultsIpTgtAddr
+      }
+      STATUS  current
+      DESCRIPTION
+          "The path to a target has just been determined."
+      ::= { traceRouteNotifications 3 }
+
+ -- Conformance information
+ -- Compliance statements
+
+ traceRouteCompliances OBJECT IDENTIFIER
+      ::= { traceRouteConformance 1 }
+ traceRouteGroups      OBJECT IDENTIFIER
+      ::= { traceRouteConformance 2 }
+
+ -- Compliance statements
+
+ traceRouteFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities that
+            fully implement the DISMAN-TRACEROUTE-MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                            traceRouteMinimumGroup,
+                            traceRouteCtlRowStatusGroup,
+                            traceRouteHistoryGroup
+                         }
+
+        GROUP traceRouteHopsTableGroup
+        DESCRIPTION
+            "This group lists the objects that make up a
+            traceRouteHopsEntry.  Support of the traceRouteHopsTable
+            is optional."
+
+        GROUP traceRouteNotificationsGroup
+        DESCRIPTION
+            "This group defines a collection of optional
+            notifications."
+
+        OBJECT traceRouteMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support SET
+            operations to this object."
+
+        OBJECT traceRouteCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of its
+            implementation.  The function represented by this
+            object is implementable if the setsockopt
+            SOL_SOCKET SO_DONTROUTE option is supported."
+
+        OBJECT traceRouteCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT traceRouteCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT traceRouteCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlMiscOptions
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Support of this object is optional.  If not
+            supporting, do not allow write access and return a
+            zero-length octet string as the value of the object."
+
+        OBJECT traceRouteCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  It is also allowed
+            that implementations support only the volatile(2)
+            StorageType enumeration."
+
+        OBJECT traceRouteCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that is RECOMMENDED to be supported by an
+            implementation is traceRouteUsingUdpProbes."
+
+        OBJECT traceRouteResultsIpTgtAddrType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteResultsIpTgtAddr
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteResultsLastGoodPath
+        DESCRIPTION
+            "If the traceRouteHopsTableGroup is implemented, then
+            this object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT traceRouteProbeHistoryHAddrType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteProbeHistoryHAddr
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteProbeHistoryTime
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT traceRouteHopsIpTgtAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteHopsIpTgtAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteHopsLastGoodProbe
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+    ::= { traceRouteCompliances 2 }
+
+ traceRouteMinimumCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The minimum compliance statement for SNMP entities
+            which implement the minimal subset of the
+            DISMAN-TRACEROUTE-MIB.  Implementors might choose this
+            subset for small devices with limited resources."
+    MODULE  -- this module
+
+        MANDATORY-GROUPS { traceRouteMinimumGroup }
+
+        GROUP traceRouteCtlRowStatusGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+            the traceRouteCtlRowStatusGroup."
+
+        GROUP traceRouteHistoryGroup
+        DESCRIPTION
+            "A compliant implementation does not have to implement
+            the traceRouteHistoryGroup."
+
+        GROUP traceRouteHopsTableGroup
+        DESCRIPTION
+            "This group lists the objects that make up a
+            traceRouteHopsEntry.  Support of the traceRouteHopsTable
+            is optional."
+
+        GROUP traceRouteNotificationsGroup
+        DESCRIPTION
+            "This group defines a collection of optional
+            notifications."
+
+        OBJECT traceRouteMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support SET
+            operations to this object."
+
+        OBJECT traceRouteCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a false(2) as the value of this
+            object.  A value of false(2) means that the function
+            represented by this option is not supported."
+
+        OBJECT traceRouteCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT traceRouteCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access to this object is not required by
+            implementations that are not capable of binding the
+            send socket with a source address.  An implementation
+            is only required to support IPv4 and IPv6 addresses."
+
+        OBJECT traceRouteCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlMiscOptions
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Support of this object is optional.  If not
+            supporting, do not allow write access, and return a
+            zero-length octet string as the value of the object."
+
+        OBJECT traceRouteCtlDontFragment
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a false(2) as the value of this
+            object.  A value of false(2) means that the function
+            represented by this option is not supported."
+
+        OBJECT traceRouteCtlInitialTtl
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 1 as the value of this object."
+
+        OBJECT traceRouteCtlFrequency
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  It is also allowed
+            that implementations support only the volatile(2)
+            StorageType enumeration."
+
+        OBJECT traceRouteCtlDescr
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support set
+            operations to this object."
+
+        OBJECT traceRouteCtlMaxRows
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            traceRouteHistoryGroup is not implemented, then write
+            access to this object MUST be disabled, and the object
+            MUST return a value of 0 when retrieved."
+
+        OBJECT traceRouteCtlTrapGeneration
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            traceRouteNotificationsGroup is not implemented, then
+            write access to this object MUST be disabled, and the
+            object MUST return a value with no bit set when
+            retrieved.  No bit set indicates that no notification
+            is generated."
+
+        OBJECT traceRouteCtlCreateHopsEntries
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  If the
+            traceRouteHopsTableGroup is not implemented, then
+            write access to this object MUST be disabled, and the
+            object MUST return a value of false(2) when retrieved."
+
+        OBJECT traceRouteCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+
+            value that is RECOMMENDED to be supported by an
+            implementation is traceRouteUsingUdpProbes."
+
+        OBJECT traceRouteResultsIpTgtAddrType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteResultsIpTgtAddr
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteResultsLastGoodPath
+        DESCRIPTION
+            "This object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT traceRouteProbeHistoryHAddrType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteProbeHistoryHAddr
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteProbeHistoryTime
+        DESCRIPTION
+            "If the traceRouteHistoryGroup is implemented, then
+            this object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+
+        OBJECT traceRouteHopsIpTgtAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteHopsIpTgtAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteHopsLastGoodProbe
+        DESCRIPTION
+            "If the traceRouteHopsTableGroup is implemented, then
+            this object is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects.  It is RECOMMENDED
+            that when this object is not supported its values
+            be reported as '0000000000000000'H."
+    ::= { traceRouteCompliances 3 }
+
+ traceRouteCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for the DISMAN-TRACEROUTE-MIB.
+            This compliance statement has been deprecated because
+            the traceRouteGroup and the traceRouteTimeStampGroup
+            have been split and deprecated. The
+            traceRouteFullCompliance is semantically identical to the
+            deprecated traceRouteCompliance statement."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                            traceRouteGroup
+                          }
+        GROUP traceRouteTimeStampGroup
+        DESCRIPTION
+            "This group is mandatory for implementations that have
+            access to a system clock and that are capable of setting
+            the values for DateAndTime objects."
+
+        GROUP traceRouteNotificationsGroup
+        DESCRIPTION
+            "This group defines a collection of optional
+            notifications."
+
+        GROUP traceRouteHopsTableGroup
+        DESCRIPTION
+            "This group lists the objects that make up a
+            traceRouteHopsEntry.  Support of the traceRouteHopsTable
+            is optional."
+
+        OBJECT traceRouteMaxConcurrentRequests
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support SET
+            operations to this object."
+
+        OBJECT traceRouteCtlByPassRouteTable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of its implementation.  The function
+            represented by this object is implementable if the
+            setsockopt SOL_SOCKET SO_DONTROUTE option is
+            supported."
+
+        OBJECT traceRouteCtlSourceAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of binding the send socket with a
+            source address.  An implementation is only required to
+            support IPv4 and IPv6 addresses."
+
+        OBJECT traceRouteCtlSourceAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "This object is not required by implementations that
+            are not capable of binding the send socket with a
+            source address.  An implementation is only required to
+            support IPv4 and globally unique IPv6 addresses."
+
+        OBJECT traceRouteCtlIfIndex
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  When write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlMiscOptions
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Support of this object is optional.  When not
+            supporting, do not allow write access, and return a
+            zero-length octet string as the value of the object."
+
+        OBJECT traceRouteCtlStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  It is also allowed
+           that implementations support only the volatile
+            StorageType enumeration."
+
+        OBJECT traceRouteCtlDSField
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  When write access is
+            not supported, return a 0 as the value of this object.
+            A value of 0 implies that the function represented by
+            this option is not supported."
+
+        OBJECT traceRouteCtlType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.  In addition, the only
+            value that is RECOMMENDED to be supported by an
+            implementation is traceRouteUsingUdpProbes."
+
+        OBJECT traceRouteResultsIpTgtAddrType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteResultsIpTgtAddr
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteProbeHistoryHAddrType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteProbeHistoryHAddr
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteHopsIpTgtAddressType
+        SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+
+        OBJECT traceRouteHopsIpTgtAddress
+        SYNTAX  InetAddress (SIZE(0|4|16))
+        DESCRIPTION
+            "An implementation should only support IPv4 and
+            globally unique IPv6 address values for this object."
+    ::= { traceRouteCompliances 1 }
+
+ -- MIB groupings
+
+ traceRouteMinimumGroup OBJECT-GROUP
+   OBJECTS {
+             traceRouteMaxConcurrentRequests,
+             traceRouteCtlTargetAddressType,
+             traceRouteCtlTargetAddress,
+             traceRouteCtlByPassRouteTable,
+             traceRouteCtlDataSize,
+             traceRouteCtlTimeOut,
+             traceRouteCtlProbesPerHop,
+             traceRouteCtlPort,
+             traceRouteCtlMaxTtl,
+             traceRouteCtlDSField,
+             traceRouteCtlSourceAddressType,
+             traceRouteCtlSourceAddress,
+             traceRouteCtlIfIndex,
+             traceRouteCtlMiscOptions,
+             traceRouteCtlMaxFailures,
+             traceRouteCtlDontFragment,
+             traceRouteCtlInitialTtl,
+             traceRouteCtlFrequency,
+             traceRouteCtlStorageType,
+             traceRouteCtlAdminStatus,
+             traceRouteCtlMaxRows,
+             traceRouteCtlTrapGeneration,
+             traceRouteCtlDescr,
+             traceRouteCtlCreateHopsEntries,
+             traceRouteCtlType,
+             traceRouteResultsOperStatus,
+             traceRouteResultsCurHopCount,
+             traceRouteResultsCurProbeCount,
+             traceRouteResultsIpTgtAddrType,
+             traceRouteResultsIpTgtAddr,
+             traceRouteResultsTestAttempts,
+             traceRouteResultsTestSuccesses,
+             traceRouteResultsLastGoodPath
+
+          }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the remote traceroute
+       operation."
+   ::= { traceRouteGroups 5 }
+
+ traceRouteCtlRowStatusGroup OBJECT-GROUP
+   OBJECTS {
+             traceRouteCtlRowStatus
+          }
+   STATUS  current
+   DESCRIPTION
+       "The RowStatus object of the traceRouteCtlTable."
+   ::= { traceRouteGroups 6 }
+
+ traceRouteHistoryGroup OBJECT-GROUP
+   OBJECTS {
+             traceRouteProbeHistoryHAddrType,
+             traceRouteProbeHistoryHAddr,
+             traceRouteProbeHistoryResponse,
+             traceRouteProbeHistoryStatus,
+             traceRouteProbeHistoryLastRC,
+             traceRouteProbeHistoryTime
+           }
+   STATUS  current
+   DESCRIPTION
+       "The group of objects that constitute the history
+       capability."
+    ::= { traceRouteGroups 7 }
+
+ traceRouteNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+             traceRoutePathChange,
+             traceRouteTestFailed,
+             traceRouteTestCompleted
+          }
+   STATUS   current
+   DESCRIPTION
+       "The notifications that are required to be supported by
+       implementations of this MIB."
+   ::= { traceRouteGroups 3 }
+
+ traceRouteHopsTableGroup OBJECT-GROUP
+   OBJECTS {
+             traceRouteHopsIpTgtAddressType,
+             traceRouteHopsIpTgtAddress,
+             traceRouteHopsMinRtt,
+             traceRouteHopsMaxRtt,
+             traceRouteHopsAverageRtt,
+             traceRouteHopsRttSumOfSquares,
+             traceRouteHopsSentProbes,
+             traceRouteHopsProbeResponses,
+             traceRouteHopsLastGoodProbe
+           }
+    STATUS   current
+    DESCRIPTION
+        "The group of objects that constitute the
+        traceRouteHopsTable."
+  ::= { traceRouteGroups 4 }
+
+ traceRouteGroup OBJECT-GROUP
+   OBJECTS {
+             traceRouteMaxConcurrentRequests,
+             traceRouteCtlTargetAddressType,
+             traceRouteCtlTargetAddress,
+             traceRouteCtlByPassRouteTable,
+             traceRouteCtlDataSize,
+             traceRouteCtlTimeOut,
+             traceRouteCtlProbesPerHop,
+             traceRouteCtlPort,
+             traceRouteCtlMaxTtl,
+             traceRouteCtlDSField,
+             traceRouteCtlSourceAddressType,
+             traceRouteCtlSourceAddress,
+             traceRouteCtlIfIndex,
+             traceRouteCtlMiscOptions,
+             traceRouteCtlMaxFailures,
+             traceRouteCtlDontFragment,
+             traceRouteCtlInitialTtl,
+             traceRouteCtlFrequency,
+             traceRouteCtlStorageType,
+             traceRouteCtlAdminStatus,
+             traceRouteCtlMaxRows,
+             traceRouteCtlTrapGeneration,
+             traceRouteCtlDescr,
+             traceRouteCtlCreateHopsEntries,
+             traceRouteCtlType,
+             traceRouteCtlRowStatus,
+             traceRouteResultsOperStatus,
+             traceRouteResultsCurHopCount,
+             traceRouteResultsCurProbeCount,
+             traceRouteResultsIpTgtAddrType,
+             traceRouteResultsIpTgtAddr,
+             traceRouteResultsTestAttempts,
+             traceRouteResultsTestSuccesses,
+             traceRouteProbeHistoryHAddrType,
+             traceRouteProbeHistoryHAddr,
+             traceRouteProbeHistoryResponse,
+             traceRouteProbeHistoryStatus,
+             traceRouteProbeHistoryLastRC
+          }
+   STATUS  deprecated
+   DESCRIPTION
+       "The group of objects that constitute the remote traceroute
+       operation."
+   ::= { traceRouteGroups 1 }
+
+ traceRouteTimeStampGroup OBJECT-GROUP
+   OBJECTS {
+             traceRouteResultsLastGoodPath,
+             traceRouteProbeHistoryTime
+           }
+   STATUS  deprecated
+   DESCRIPTION
+       "The group of DateAndTime objects."
+    ::= { traceRouteGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/DLINK-AGENT-MIB.mib b/snmp_builder/mibs/DLINK-AGENT-MIB.mib
new file mode 100644
index 0000000..716aff4
--- /dev/null
+++ b/snmp_builder/mibs/DLINK-AGENT-MIB.mib
@@ -0,0 +1,1021 @@
+-- Revision 1.83 Draft ---------------------------
+-- 2004/1/12 11:50¤W¤È  ---------------------------
+-- Add a object 'agentBscSwFileBIncrement' in agentBscSwFileTable
+-- Add group 'agentCPUutilization'
+-- Add swMultiImageCtrlTable ,swMultiImageInfoTable
+-- Revision 1.82 Draft ---------------------------
+--2003/5/14 02:11¤U¤È  ---------------------------
+-- re-arrange the agentNotify subtree
+-- ------------------------------------------------------------------------ 
+-- Revision 1.81 Draft ---------------------------
+-- 2003/3/24 03:09¤U¤È
+-- remove  status "changed-not-save(4)"  in object agentStatusSaveCfg
+-- change object  MAX-ACCESS of agentTrapManagerIpAddr  from read-only to read-write 
+-- ------------------------------------------------------------------------ 
+-- Revision 1.8 Draft ---------------------------
+-- 2003/1/21 11:21¤W¤È
+-- Modified  Common traps and management
+-- ----------------------------------------------
+-- Remove agentConsoleModeManager , agentSlipModeManager
+-- Add Common traps management
+-- Revision 1.7
+-- Copyright 2000 D-Link Inc.
+-- All rights reserved.
+
+DLINK-AGENT-MIB  DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        IpAddress			        FROM RFC1155-SMI
+        MODULE-IDENTITY, OBJECT-TYPE,
+        Integer32		 	FROM SNMPv2-SMI
+        TruthValue          FROM SNMPv2-TC
+        DisplayString		FROM RFC1213-MIB      
+        AgentNotifyLevel    FROM DLINK-ID-REC-MIB      
+        dlink-common-mgmt	FROM DLINK-ID-REC-MIB;        
+    	
+      agentGeneralMgmt MODULE-IDENTITY
+	    LAST-UPDATED "0007150000Z"
+	    ORGANIZATION "D-Link, Inc."
+	    CONTACT-INFO
+	        "   D-Link Customer Service
+
+		    Postal: No. 20,Park Ave, II, Science-based
+			        Industrial Park, Hsinchu, taiwan, R.O.C.
+
+		       Tel: 886-3-577-9966
+
+		    E-mail: "
+	    DESCRIPTION
+		    "The Structure of Common Management Information for the
+		    D-Link enterprise."
+        ::= {  dlink-common-mgmt 1 }
+
+    -- ****************
+    -- agentBasicInfo *
+    -- ****************
+    agentBasicInfo          OBJECT IDENTIFIER ::= { agentGeneralMgmt 1 }
+        
+    agentMgmtProtocolCapability OBJECT-TYPE
+        SYNTAX  INTEGER {   
+                    other(1),
+                    snmp-ip(2),
+                    snmp-ipx(3),
+                    snmp-ip-ipx(4)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The network management protocol(s) supported by this agent."
+        ::= { agentBasicInfo 1 }
+
+
+    -- *************************
+    -- agentMibcapabilityTable *
+    -- *************************
+
+    agentMibCapabilityTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AgentMibCapabilityEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A list of MIB capability entries supported by this agent."    
+        ::= { agentBasicInfo 2 }
+
+    agentMibCapabilityEntry OBJECT-TYPE
+        SYNTAX  AgentMibCapabilityEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A MIB capability entry contains objects describing a particular MIB
+             supported by this agent."
+        INDEX   { agentMibCapabilityIndex }
+        ::= { agentMibCapabilityTable 1 }
+
+    AgentMibCapabilityEntry ::= 
+        SEQUENCE {
+            agentMibCapabilityIndex
+                Integer32,
+            agentMibCapabilityDescr
+                DisplayString,
+            agentMibCapabilityVersion
+                Integer32,
+            agentMibCapabilityType
+                INTEGER
+        }
+
+    agentMibCapabilityIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "A list of agentMibCapabilityDescr entries."
+        ::= { agentMibCapabilityEntry 1 }
+
+    agentMibCapabilityDescr OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..35))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The name of the MIB supported by the agent."
+        ::= { agentMibCapabilityEntry 2 }
+
+    agentMibCapabilityVersion OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The version of the MIB specified in this entry."
+        ::= { agentMibCapabilityEntry 3 }
+
+    agentMibCapabilityType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    standard(2),
+                    proprietary(3),
+                    experiment(4)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The type of the MIB specified in this entry."
+        ::= { agentMibCapabilityEntry 4 }
+
+
+    agentStatusConsoleInUse   OBJECT-TYPE
+        SYNTAX INTEGER {
+               other(1),
+               in-use(2),
+               not-in-use(3)
+               }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "This indicates whether console is currently in-use."
+        ::= { agentBasicInfo 3 }
+
+    agentStatusSaveCfg OBJECT-TYPE
+        SYNTAX INTEGER {
+               other(1),
+               proceeding(2),
+               completed(3),
+               failed(4)
+               }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "This indicates the status of the device configuration.
+            
+            other(1) - this entry is currently in use but the conditions 
+                     under which it will remain so are different from each 
+                     of the following values.
+            proceeding(2) - the device configuration is being currently saved into the NV-RAM.
+            completed(3) ¡V all of the device configuration parameters have been
+                     saved into NV-RAM.
+            failed(4) - The process to save device configuration is failed."
+        ::= { agentBasicInfo 4 }
+
+    agentStatusFileTransfer OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1) ,
+                    in-process(2),
+                    invalid-file(3),
+                    violation(4),
+                    file-not-found(5),
+                    disk-full(6),
+                    complete(7),
+                    time-out(8),
+                    not-format(9),
+                    memory-full(10)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "status of firmware download control. If the value is 'other',
+            means never firmware updated since device started up." 
+        ::= { agentBasicInfo 5 } 
+ 
+    -- *************************
+    -- agentCPUutilizationTable *
+    -- *************************
+    agentCPUutilization          OBJECT IDENTIFIER ::= { agentBasicInfo 6 }
+    
+
+    agentCPUutilizationIn5sec OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Time scale is 5 seconds.The value will be between 0%(idle) and 100%
+            (very busy)."
+        ::= { agentCPUutilization 1 }
+
+    agentCPUutilizationIn1min OBJECT-TYPE
+        SYNTAX  Integer32
+
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Time scale is 1 minute.The value will be between 0%(idle) and 100%
+            (very busy)."
+        ::= { agentCPUutilization 2 }
+
+    agentCPUutilizationIn5min OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Time scale is 5 minute.The value will be between 0%(idle) and 100%
+            (very busy)."
+        ::= { agentCPUutilization 3 }
+ 
+    -- ******************
+    -- agentBasicConfig *
+    -- ******************
+    agentBasicConfig        OBJECT IDENTIFIER ::= { agentGeneralMgmt 2 }   
+
+    agentBscSwFileTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF AgentBscSwFileEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A list of MIB Basic Config entries supported file Update by this agent."    
+        ::= { agentBasicConfig 1 }    
+        
+    agentBscSwFileEntry OBJECT-TYPE
+        SYNTAX  AgentBscSwFileEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A basic config entry contains objects describing a particular MIB
+             supported by this agent."
+        INDEX   { agentBscSwFileIndex }
+        ::= { agentBscSwFileTable 1 }        
+
+    AgentBscSwFileEntry ::=
+    	SEQUENCE {
+    		agentBscSwFileIndex
+    			Integer32,
+    		agentBscSwFileDscr
+    			DisplayString,
+    		agentBscSwFileAddr
+    			IpAddress,
+    		agentBscSwFileTransferType
+    			INTEGER,
+        	agentBscSwFile
+        		DisplayString,
+        	agentBscSwFileLocateId
+        		INTEGER,
+        	agentBscSwFileLoadType
+        		INTEGER,
+        	agentBscSwFileCtrl
+        		INTEGER,
+        	agentBscSwFileBIncrement
+        	    TruthValue,
+        	agentMultiImageCtrlID
+        		INTEGER
+
+        }
+
+    agentBscSwFileIndex OBJECT-TYPE
+    	SYNTAX	Integer32
+    	MAX-ACCESS	read-only
+    	STATUS	current
+    	DESCRIPTION
+    		"The table index for the file entry"
+    	::= { agentBscSwFileEntry 1 }
+
+    agentBscSwFileDscr OBJECT-TYPE
+        SYNTAX  DisplayString  (SIZE (0..64))
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "The description for the purpose of the software file in this entry.
+			 Note:
+			 For system which does not support change of this object, setting value to 
+			 this object will cause the system to return bad-value error message.
+			 "
+        ::= { agentBscSwFileEntry 2 }
+        
+    agentBscSwFileAddr OBJECT-TYPE
+        SYNTAX  IpAddress
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "The IP address where the File to be downloaded is located, or the IP address
+            where the file will be uploaded to."
+        ::= {  agentBscSwFileEntry 3 }
+            	
+    agentBscSwFileTransferType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    network-load(2),
+                    out-of-band-load(3)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "The channel through which the file will be downloaded or uploaded. 
+
+			 Note:
+			 For system which does not support all channels, setting value to the unsupported 
+			 channel will cause the system to return bad-value error message.
+			 "
+        ::= { agentBscSwFileEntry 4 }
+
+    agentBscSwFile OBJECT-TYPE
+        SYNTAX  DisplayString  (SIZE (0..64))
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "The name of the file to be downloaded from the TFTP server, or to be uploaded
+            to."
+        ::= { agentBscSwFileEntry 5 }
+        
+     agentBscSwFileLocateId OBJECT-TYPE
+        SYNTAX  INTEGER (1..16)
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "This object describes the type of the file.
+             runtime-code(1),
+             log-file(2),
+             cfg-file(3)
+             
+			 Note:
+			 For system which does not support change of this object, setting value to 
+			 this object will cause the system to return bad-value error message.
+             " 
+        ::= { agentBscSwFileEntry 6 }
+        
+     agentBscSwFileLoadType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    upload(2),
+                    download(3)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        	"This object provides the user to select download or upload function for the file.
+
+			 Note:
+			 For system which does not support change of this object, setting value to 
+			 this object will cause the system to return bad-value error message.
+			 "
+        ::= { agentBscSwFileEntry 7 }
+                                               
+     agentBscSwFileCtrl OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    inactive(2),
+                    start(3),
+                    delete(4),
+                    config-as-bootup-fw(5)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "This object provides the user to download runtime software. The setting 
+ 		  	 will take effect when the system is restart. See Note(1) below
+ 		  
+			 Note:
+			 For system which does not support change of this object to some value, 
+			 setting object to these values cause the system to return 
+			 bad-value error message
+			
+			start - start to action.
+	        delete(4) - delete the firmware by indicated firmware ID.
+	        config-as-bootup-fw(5) - configured as bootup firmware by indicated 
+            firmware(ID)."
+        ::= { agentBscSwFileEntry 8 }
+
+	agentBscSwFileBIncrement OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The object indicate that whether the previously configuration will keep valid
+              or not after config file downloaded .
+             True : keep valid
+             False : erase. "
+        ::= { agentBscSwFileEntry 9 }       
+
+    agentMultiImageCtrlID OBJECT-TYPE
+        SYNTAX  INTEGER
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "The section ID of firmware image."
+        ::= { agentBscSwFileEntry 10 }
+
+	agentFileTransfer OBJECT-TYPE
+		SYNTAX INTEGER {
+				other(1),
+				start(2),
+				start-and-reset(3),
+				noaction(4)
+			}
+		MAX-ACCESS read-write
+		STATUS obsolete
+		DESCRIPTION
+			"This object will execute the download or upload action. If start(2), it will
+			begin to download/upload, but no reset as follow. If start-and-reset(3), then
+			the reset will active after download or upload. No action if(4). 
+
+			 Note:
+			 Because these functions will be limited by the system support. Some of the 
+			 select item will invalid. When one of the item user select,it will response with 
+			 bad-value status."
+		::= { agentBasicConfig 2 }
+				
+    agentSystemReset OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    cold-start(2),
+                    warm-start(3),
+                    no-reset(4)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the agent system reset state. Setting this
+             object to no-reset(4) has no effect. Setting this object to
+             cold-start(2) or warm-start(3) will reset the agent. The agent 
+             always returns no-reset(4) when this object is read."
+        ::= { agentBasicConfig 3 }
+
+    agentRs232PortConfig OBJECT-TYPE
+        SYNTAX  INTEGER  {
+                    other(1),
+                    console(2),
+                    out-of-band(3),
+					notAvail(4)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the RS-232C mode while device restart."
+        ::= { agentBasicConfig 4 }
+
+    agentOutOfBandBaudRateConfig OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    baudRate-2400 (2),
+                    baudRate-9600 (3),
+                    baudRate-19200(4),
+                    baudRate-38400(5),
+                    baudRate-115200(6)
+                }
+        MAX-ACCESS  read-write
+        STATUS  obsolete
+        DESCRIPTION
+            "This object allows user to specify out_of_band baud rate. It will take effect
+			 when the system is restart. 
+			 
+			 Note:
+			 Because these funiction will be limited by the system support. Some of the 
+			 select item will invalid. When one of the item user select,it will response with 
+			 bad-value status.			 
+			 "
+        ::= { agentBasicConfig 5 }
+
+     agentSaveCfg OBJECT-TYPE
+        SYNTAX INTEGER {
+        			other(1),
+        			idle(2),
+        			set(3)
+        		}
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "As the object is set to 'set(3)', the current device configuration will be saved
+             into to NV-RAM."
+        ::= { agentBasicConfig 6 }                
+
+--***************************************************************************
+--swMultiImageInfoTable
+--***************************************************************************
+    swMultiImageInfoTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SwMultiImageInfoEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            ""
+        ::= { agentBasicConfig 7 }
+        
+    swMultiImageInfoEntry OBJECT-TYPE
+        SYNTAX  SwMultiImageInfoEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A list of information about multiple image management."
+        INDEX  { swMultiImageInfoID }
+        ::= { swMultiImageInfoTable 1 }
+      
+    SwMultiImageInfoEntry ::= 
+        SEQUENCE {
+        	swMultiImageInfoID
+        		INTEGER,
+            swMultiImageVersion
+                DisplayString,
+            swMultiImageSize
+                Integer32,
+            swMultiImageUpdateTime
+                DisplayString,
+            swMultiImageFrom
+                DisplayString,               
+            swMultiImageSendUser
+                DisplayString                                                 
+        }
+    swMultiImageInfoID OBJECT-TYPE
+        SYNTAX  INTEGER
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The section ID of firmware image."
+        ::= { swMultiImageInfoEntry 1 }
+             
+    swMultiImageVersion OBJECT-TYPE
+        SYNTAX  DisplayString  (SIZE (0..32))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The record of downloaded firmware version."
+        ::= { swMultiImageInfoEntry 2 }
+        
+    swMultiImageSize OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The record of downloaded firmware size."
+        ::= { swMultiImageInfoEntry 3 }
+
+    swMultiImageUpdateTime OBJECT-TYPE
+        SYNTAX  DisplayString  (SIZE (0..32))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The record of firmware updated time."
+        ::= { swMultiImageInfoEntry 4 }
+
+    swMultiImageFrom OBJECT-TYPE
+        SYNTAX  DisplayString  (SIZE (0..32))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The record of ip address of tftp server."
+        ::= { swMultiImageInfoEntry 5 }
+
+    swMultiImageSendUser OBJECT-TYPE
+        SYNTAX  DisplayString  (SIZE (0..32))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The record of user who download the firmware."
+        ::= { swMultiImageInfoEntry 6 }
+
+--***************************************************************************
+--swMultiImageCtrlTable
+--***************************************************************************
+--    swMultiImageCtrlTable OBJECT-TYPE
+--        SYNTAX  SEQUENCE OF SwMultiImageCtrlEntry
+--        MAX-ACCESS  not-accessible
+--        STATUS  current
+--        DESCRIPTION
+--            ""
+--        ::= { agentBasicConfig 8 }
+        
+--    swMultiImageCtrlEntry OBJECT-TYPE
+--        SYNTAX  SwMultiImageCtrlEntry
+--        MAX-ACCESS  not-accessible
+--        STATUS  current
+--        DESCRIPTION
+--            "A list of information about multiple image management."
+--        INDEX  { swMultiImageID }
+--        ::= { swMultiImageCtrlTable 1 }
+      
+--    SwMultiImageCtrlEntry ::= 
+--        SEQUENCE {
+--        	swMultiImageCtrlID
+--        		INTEGER,
+--            swMultiImageSourceAddr
+--                IpAddress,
+--            swMultiImageFileName
+--                DisplayString,        
+--            swMultiImageAction
+--                INTEGER                                                        
+--        }
+--    swMultiImageCtrlID OBJECT-TYPE
+--        SYNTAX  INTEGER
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "The section ID of firmware image."
+--        ::= { swMultiImageCtrlEntry 1 }
+        
+--    swMultiImageSourceAddr OBJECT-TYPE
+--        SYNTAX  IpAddress
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "The ip address where new firmware image file is located on."
+--        ::= { swMultiImageCtrlEntry 2 }
+        
+--    swMultiImageFileName OBJECT-TYPE
+--        SYNTAX  DisplayString  (SIZE (0..64))
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "The full name of the firmware image file to be downloaded."
+--        ::= { swMultiImageCtrlEntry 3 }
+        
+--    swMultiImageAction OBJECT-TYPE
+--		SYNTAX  INTEGER {
+--               other(1),
+--               update(2),
+--               delete(3),
+--               config-as-bootup-fw(4)
+--               }
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "This object indicates the status of multiImageTable actions. 
+
+--            other(1) - .
+--            update(2) - download firmware to indicated section.
+--            delete(3) - delete the firmware by indicated firmware ID.
+--            config-as-bootup-fw(4) - configured as bootup firmware by indicated firmware(ID)."
+--        ::= { swMultiImageCtrlEntry 4 }    
+                       
+    -- ***********************
+    -- agentIpProtocolConfig *
+    -- ***********************
+    agentIpProtoConfig      OBJECT IDENTIFIER ::= { agentGeneralMgmt 3 }
+
+    agentIpNumOfIf OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The total number of IP interfaces supported by this agent."
+        ::= {  agentIpProtoConfig 1 }
+
+    agentIpTftpServerAddr OBJECT-TYPE
+        SYNTAX  IpAddress
+        MAX-ACCESS  read-write
+        STATUS  obsolete
+        DESCRIPTION
+            "The IP Address of TFTP Server."
+        ::= {  agentIpProtoConfig 2 }
+	
+    agentIpGetIpFrom OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    disabled(2),
+                    bootp(3),
+                    dhcp(4)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "This object indicates whether the agent get its system IP address
+             from Bootp/DHCP server at start up."
+        ::= { agentIpProtoConfig 3 }	
+
+    agentIpAutoconfig OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            ""
+        ::= { agentIpProtoConfig 4 }
+        
+	-- End of agentIpIfTable ---------  
+	
+-- ******************************************************************************************	
+-- Add common trap management 
+-- ******************************************************************************************
+      
+	agentNotify	OBJECT IDENTIFIER ::= { agentGeneralMgmt 4 }  
+	  
+	agentNotifMgmt      OBJECT IDENTIFIER ::= { agentNotify 1 }  
+
+-- ******************************************************************************************	
+--	agentNotifMgmt
+-- ******************************************************************************************
+   
+    systemTrapsSeverity OBJECT-TYPE
+        SYNTAX  AgentNotifyLevel 
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "Indicate the level of  system severity control,The system has a severity level control 
+            and each trap should be along with a severity control. When trap event occurs 
+            and its severity is higher than the system severity control level, the trap works 
+            as it defined. If the event severity is lower than the system severity control level,
+            the event is ignored as if it did not occur."
+        ::= { agentNotifMgmt 1 }     
+        		    
+    systemLogsSeverity OBJECT-TYPE
+        SYNTAX  AgentNotifyLevel 
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "Indicate the level of  system severity control,The system has a severity level control 
+            and each log should be along with a severity control. When log event occurs 
+            and its severity is higher than the system severity control level, the log works 
+            as it defined. If the event severity is lower than the system severity control level,
+            the event is ignored as if it did not occur."
+        ::= { agentNotifMgmt 2 }  
+               		      
+    -- ************************
+    -- agentIptrapMangerTable *
+    -- ************************
+
+--	agentIpTrapManager	OBJECT IDENTIFIER ::= { agentGeneralMgmt 4 }
+	
+--    agentIpTrapManagerTable OBJECT-TYPE-
+--        SYNTAX  SEQUENCE OF AgentIpTrapManagerEntry
+--        MAX-ACCESS  not-accessible
+--        STATUS  current
+--        DESCRIPTION
+--            "A list of trap managers to which SNMP traps will be sent."
+--        ::= {  agentIpTrapManager 1 }
+
+--    agentIpTrapManagerEntry OBJECT-TYPE
+--        SYNTAX  AgentIpTrapManagerEntry
+--        MAX-ACCESS  not-accessible
+--        STATUS  obsolete
+--        DESCRIPTION
+--            "Each entry contains the particular trap manager settings."
+--        INDEX   { agentIpTrapManagerIpAddr }
+--        ::= { agentIpTrapManagerTable 1 }
+
+-- *****************************************************************************
+--
+-- *****************************************************************************
+        
+--    agentTrapManagerTable OBJECT-TYPE
+--        SYNTAX  SEQUENCE OF AgentTrapManagerEntry
+--        MAX-ACCESS  not-accessible
+--        STATUS  current
+--        DESCRIPTION
+--            "A list of trap managers to which SNMP traps will be sent."
+--        ::= {  agentIpTrapManager 2 }
+
+--    agentTrapManagerEntry OBJECT-TYPE
+--        SYNTAX  AgentTrapManagerEntry
+--        MAX-ACCESS  not-accessible
+--        STATUS  current
+--        DESCRIPTION
+--            "Each entry contains the particular trap manager settings."
+--        INDEX   { agentTrapManagerIndex }
+--        ::= { agentTrapManagerTable 1 }
+
+--    AgentTrapManagerEntry ::= 
+--        SEQUENCE {
+--				    agentTrapManagerIndex
+--				        INTEGER,
+--                    agentTrapManagerIpAddr
+--                        IpAddress,
+--                    agentTrapManagerComm
+--                        DisplayString,
+--                    agentTrapManagerMsgVer
+--                        INTEGER,
+--                    agentTrapManagerStatus
+--                        INTEGER
+--        }
+
+--	agentTrapManagerIndex  OBJECT-TYPE
+--	    SYNTAX     INTEGER (1..65535)
+--	    MAX-ACCESS not-accessible
+--	    STATUS     current
+--	    DESCRIPTION
+--	        "A value that uniquely identifies this trapDestEntry."
+--	    ::= { agentTrapManagerEntry 1 }
+    
+--    agentTrapManagerIpAddr OBJECT-TYPE
+--        SYNTAX  IpAddress
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "The IP address where SNMP traps will be destined for"
+--        ::= { agentTrapManagerEntry 2 }
+
+--    agentTrapManagerComm OBJECT-TYPE
+--        SYNTAX  DisplayString (SIZE (0..20))
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "The community string used to encode SNMP trap packet to be sent to the trap
+--             manager."
+--        ::= { agentTrapManagerEntry 3 }
+        
+--    agentTrapManagerMsgVer OBJECT-TYPE
+--        SYNTAX  INTEGER {
+--                    snmpAgentVersionDependent(1),
+--                    v1Trap(2),
+--                    v2Trap(3)
+--                }
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "This object indicates the version of trap packets to be sent to
+--             this trap manager. the default setting is SNMPAgentVersionDependent .
+             
+--			 Note:
+--			 Because these funiction will be limited by the system support. Some of the 
+--			 select item will invalid. When one of the item user select,it will response with 
+--			 bad-value status.	             "
+--        ::= { agentTrapManagerEntry 4 }               
+
+--    agentTrapManagerStatus OBJECT-TYPE
+--        SYNTAX  INTEGER {
+--                    other(1),
+--                    disabled(2),
+--                    enabled(3)
+--                }
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "This object indicates whether or not the trap should be sent to
+--             this trap manager."
+--        ::= { agentTrapManagerEntry 5 }	          
+        
+
+--
+-- Add for Slip_Console mode swtich 11-9-2001 WindChen
+--
+--	agentConsoleModeManager	OBJECT IDENTIFIER ::= { agentGeneralMgmt 5 }
+	
+
+        
+--
+-- Slip Mode Manager
+--	
+--	agentSlipModeManager	OBJECT IDENTIFIER ::= { agentGeneralMgmt 6 }
+
+
+        
+
+-- ******************************************************************************************	
+-- Add common trap management 
+-- ******************************************************************************************	
+     
+        
+--	agentNotify	OBJECT IDENTIFIER ::= { agentGeneralMgmt 7 }  
+	  
+	  
+	  
+--	agentNotifMgmt      OBJECT IDENTIFIER ::= { agentNotify 1 }  
+--	agentNotifFirmware   OBJECT IDENTIFIER ::= { agentNotify 2 }  
+	
+	
+	
+--	agentNotifyPrefix OBJECT IDENTIFIER ::= { agentNotifFirmware 0 }  
+
+	
+
+	
+-- ******************************************************************************************	
+--	agentNotifMgmt
+-- ******************************************************************************************
+
+--    systemTrapsSeverity OBJECT-TYPE
+--        SYNTAX  AgentNotifyLevel 
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "Indicate the level of  all system trap.
+--			"
+--        ::= { agentNotifMgmt 1 }
+
+--	notifFirmwareMgmt OBJECT IDENTIFIER ::= { agentNotifMgmt 2 }  
+     
+-- ******************************************************************************************	
+
+--    systemRestartTrapSeverity OBJECT-TYPE
+--        SYNTAX  AgentNotifyLevel 
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "Indicate the level of  system Restart detection.
+--			"
+
+--        ::= { notifFirmwareMgmt 1 }	
+        
+--    saveToNVRAMTrapSeverity OBJECT-TYPE
+--        SYNTAX  AgentNotifyLevel 
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "Indicate the level of  SaveToNV-RAM detection.
+--			"
+
+--        ::= { notifFirmwareMgmt 2 }	
+
+--    fileTransferStatusChangeTrapSeverity OBJECT-TYPE
+--        SYNTAX  AgentNotifyLevel 
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "Indicate the level of  FileTransferStatusChange detection.
+--			"
+
+--        ::= { notifFirmwareMgmt 3 }	         
+
+
+--    setToFactoryDefaultTrapSeverity OBJECT-TYPE
+--        SYNTAX  AgentNotifyLevel 
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "Indicate the level of  SetToFactoryDefault detection.
+--			"
+
+--        ::= { notifFirmwareMgmt 4 }	           
+        
+   	
+
+-- ******************************************************************************************        
+
+-- agentNotifFirmware OBJECT IDENTIFIER ::= { agentNotifyPrefix 0 }
+
+-- ******************************************************************************************	
+--	agentNotifFirmware
+-- ******************************************************************************************
+	
+--    agentsystemRestart NOTIFICATION-TYPE
+--        OBJECTS {
+--              trapInfosystemRestart
+--        		}
+--        STATUS  current        		
+--        DESCRIPTION
+--            " This trap contain the reboot informaton. "
+
+--		::= { agentNotifyPrefix 1 }          
+        
+		
+--    agentSaveToNVRAM NOTIFICATION-TYPE
+--        OBJECTS         { unitID
+--                        }        
+--        STATUS  current
+--        DESCRIPTION
+--            "The trap is sent whenever save all configuration of device to NV-RAM has been processed . "
+             
+--        ::= { agentNotifyPrefix 2 }    
+        
+--    agentFileTransferStatusChange NOTIFICATION-TYPE
+--        OBJECTS         { 
+--        					unitID,
+--                          agentStatusFileTransfer
+--                        }
+--        STATUS          current
+--        DESCRIPTION     "File transfer status change notification."
+--        ::= { agentNotifyPrefix 3 }	
+        
+--    agentSetToFactoryDefault NOTIFICATION-TYPE
+--        OBJECTS         { unitID
+--                        }        
+--        STATUS  current
+--        DESCRIPTION
+--            "The trap is sent whenever  the Set to factory default setting has been processed . "
+             
+--        ::= { agentNotifyPrefix 4 }           
+        
+
+-- ******************************************************************************************	
+--	agentNotifEquipment
+-- ******************************************************************************************        
+   
+      
+-- ******************************************************************************************	
+--	notificationBidings
+-- ******************************************************************************************        		 
+	 
+--    notificationBidings OBJECT IDENTIFIER ::= { agentNotifFirmware 1 }
+                
+--    unitID OBJECT-TYPE
+--        SYNTAX     INTEGER
+--        MAX-ACCESS accessible-for-notify
+--        STATUS     current
+--        DESCRIPTION
+--            "The Unit ID of the device which trigger the event"
+--        ::= { notificationBidings 1 }                          
+        
+           	        
+--    trapInfosystemRestart   OBJECT-TYPE
+--        SYNTAX  DisplayString (SIZE (0..64))
+--        MAX-ACCESS  read-only
+--        STATUS  current
+--        DESCRIPTION
+--            "This object indicates the last time reboot information.
+--            "
+--        ::= { notificationBidings 2 }         
+	 
+	           
+END
diff --git a/snmp_builder/mibs/DLINK-EQUIPMENT-MIB.mib b/snmp_builder/mibs/DLINK-EQUIPMENT-MIB.mib
new file mode 100644
index 0000000..f9e1e00
--- /dev/null
+++ b/snmp_builder/mibs/DLINK-EQUIPMENT-MIB.mib
@@ -0,0 +1,367 @@
+-- 0.9 Draft ---------------------------------------
+-- 2003/1/21 11:21¤W¤È
+-- Create DLINK-EQUIPMENT-MIB
+-- equipment : 
+-- fan , power , unit(stacking or chassis), temperature 
+-- include traps for related equipment
+-- -- ----------------------------------------------
+
+
+DLINK-EQUIPMENT-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE
+            FROM SNMPv2-SMI
+        DateAndTime, TruthValue ,DisplayString
+            FROM SNMPv2-TC
+		AgentNotifyLevel, dlink-common-mgmt 
+		    FROM DLINK-ID-REC-MIB;
+
+
+     swDlinkEquipmentMIB MODULE-IDENTITY
+          LAST-UPDATED "0202140000Z"
+          ORGANIZATION "DLink Corporation"
+          CONTACT-INFO
+                       ""
+          DESCRIPTION
+           "DLink equipments MIB ."
+          ::= { dlink-common-mgmt 11 }
+
+	MacAddress ::= OCTET STRING (SIZE (6))    -- a 6 octet address
+                                                  -- in the
+                                                  -- "canonical"
+                                                  -- order, copy from RFC1493     
+                                                  
+                                              
+
+    --
+    -- OID Tree Allocation
+    --
+    swDlinkEquipmentMib          OBJECT IDENTIFIER ::= { swDlinkEquipmentMIB 1 }
+    swDlinkEquipmentNotify		 OBJECT IDENTIFIER ::= { swDlinkEquipmentMIB 2 }
+
+    --
+    -- Object Definition 
+    --
+  
+
+    swDlinkEquipmentCapacity OBJECT-TYPE
+    SYNTAX      BITS {
+                    fanCapable(0),
+                        -- 
+                    redundantPowerCapable(1),
+                        -- 
+                    tempteratureDetection(2),
+                    stackingCapable(3),
+                    chassisCapable(4)    
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the equipment capacity supported in the system 
+        ."
+
+    ::= { swDlinkEquipmentMib 1 }
+
+
+-- --------------------------------------------------------------------------------------------------
+
+    swPowerTable OBJECT-TYPE
+        SYNTAX          SEQUENCE OF SwPowerEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION     "A list of temperature."
+        ::= { swDlinkEquipmentMib 6 }
+
+    swPowerEntry OBJECT-TYPE
+        SYNTAX          SwPowerEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION     "A entry of Power information."
+        INDEX           { swPowerUnitIndex,swPowerID }
+        ::= { swPowerTable 1 }
+
+    SwPowerEntry ::= SEQUENCE {
+    			swPowerUnitIndex		      INTEGER,
+                swPowerID	                  INTEGER,
+                swPowerStatus   			  INTEGER
+                }
+
+    swPowerUnitIndex OBJECT-TYPE
+        SYNTAX INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS current
+        DESCRIPTION
+            "Indicates ID of the unit in the System"
+        ::= { swPowerEntry 1 }
+    swPowerID OBJECT-TYPE
+        SYNTAX INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS current
+        DESCRIPTION
+        	"Indicates ID of the power 
+            1 : main power
+            2 : redundant power ."
+        ::= { swPowerEntry 2 }
+
+    swPowerStatus OBJECT-TYPE
+           SYNTAX  INTEGER {
+              other(0),
+              lowVoltage(1),
+              overCurrent(2),
+              working(3),
+              fail(4),
+              connect(5),
+              disconnect(6)
+     }        
+        
+        MAX-ACCESS  read-only
+        STATUS current
+        DESCRIPTION
+            "Indicates status of the power "
+        ::= { swPowerEntry 3 }
+        
+-- --------------------------------------------------------------------------------------------------
+
+-- swFanTable  := { swDlinkEquipmentMib 7 }
+-- swTemperatureTable := { swDlinkEquipmentMib 8 }
+
+-- ----------------------------------------------------------------------------------------------------
+    swUnitMgmt            OBJECT IDENTIFIER ::= { swDlinkEquipmentMib 9 }
+
+
+    swUnitStackingVersion OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the version of this stacking system ." 
+        ::= { swUnitMgmt 1 }
+
+    swUnitMaxSupportedUnits OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Maximum number of units are supported in the system." 
+        ::= { swUnitMgmt 2 }
+        
+    swUnitNumOfUnit OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The current number of units."
+        ::= { swUnitMgmt 3 }
+        
+    swUnitMgmtTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SwUnitMgmtEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "This table contains the unit information."
+        ::= { swUnitMgmt 4 }
+        
+    swUnitMgmtEntry OBJECT-TYPE
+        SYNTAX  SwUnitMgmtEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A list of management information for each unit in the system."
+        INDEX  { swUnitMgmtId }
+        ::= { swUnitMgmtTable 1 }
+
+    SwUnitMgmtEntry ::= 
+        SEQUENCE {
+            swUnitMgmtId
+                INTEGER,
+            swUnitMgmtMacAddr
+                MacAddress,
+            swUnitMgmtStartPort
+                INTEGER,
+            swUnitMgmtPortRange
+                INTEGER,
+			swUnitMgmtFrontPanelLedStatus                
+				OCTET STRING,
+            swUnitMgmtCtrlMode
+                INTEGER,
+            swUnitMgmtCurrentMode
+                INTEGER,
+            swUnitMgmtVersion
+                DisplayString,
+            swUnitMgmtModuleName  
+            	DisplayString      
+        }
+    
+    swUnitMgmtId OBJECT-TYPE
+        SYNTAX  INTEGER (1..15)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the specific entry in the stacking/chassis 
+            table."
+        ::= { swUnitMgmtEntry 1 }
+
+    swUnitMgmtMacAddr OBJECT-TYPE
+        SYNTAX  MacAddress
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The Mac address of this unit."
+        ::= { swUnitMgmtEntry 2 }
+
+    swUnitMgmtStartPort OBJECT-TYPE
+        SYNTAX  INTEGER (1..65535)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the start port of this unit."
+        ::= { swUnitMgmtEntry 3 }
+
+    swUnitMgmtPortRange OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the total ports of this unit." 
+        ::= { swUnitMgmtEntry 4 }
+        
+    swUnitMgmtFrontPanelLedStatus OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..103))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object is a set of system LED indications. The first three 
+            octets is defined as system LED. The first LED is power LED. The
+            second LED is console LED. The third LED is RPS (Redundancy 
+            Power Supply) LED. The third LED will always be present for device 
+            didn't support Redudancy Power Supply. The other octets following 
+            the third octets are the logical port LED (following dot1dBasePort 
+            ordering). Every two bytes are presented to a port. The first 
+            byte is presentd to the Link/Activity LED. The second byte is 
+            presented to the Speed LED.
+              
+            Link/Activity LED :
+             The most significant bit is used for blink/solid:
+                8 = The LED blinks.
+                
+             The second significant bit is used for link status:
+             	1 = link fail.
+             	2 = link pass.
+
+  	         Speed LED :
+             	01 = 10Mbps.
+             	02 = 100Mbps.
+             	03 = 1000Mbps.
+			
+            The four remaining bits are currently unused and must be 0."        
+        ::= { swUnitMgmtEntry 5 }        
+
+        
+    swUnitMgmtCtrlMode OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    auto(2),
+                    stand-alone(3),
+                    master(4),
+                    slave(5)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the stack mode that user configed for 
+            this unit.  The object only can be configed when the device is
+            stand alone.
+            
+            other(1) - this entry is currently in use but the conditions 
+                under which it will remain so are different from each of the
+                following values.
+            auto(2) - the system will auto assign this stack role of this 
+                unit to be stand-alone(3), master(4), or slave(5).    
+            stand-alone(3) - the unit is forced to stand alone.
+            master(4) - the unit is forced to master. If this unit is 
+                seleted to be master, it can modify the configuration of the
+                stacking system.
+            slave(5) - the unit is forced to slave. If this unit is 
+                seleted to be slave, it only can view the configuration of 
+                the stacking system." 
+        ::= { swUnitMgmtEntry 6 }
+        
+    swUnitMgmtCurrentMode OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    other(1),
+                    auto(2),
+                    stand-alone(3),
+                    master(4),
+                    slave(5)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The current stack role of this unit." 
+        ::= { swUnitMgmtEntry 7 }
+        
+    swUnitMgmtVersion OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..32))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object indicates the version of this stacking unit." 
+        ::= { swUnitMgmtEntry 8 }
+
+	swUnitMgmtModuleName OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE (0..32))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "A textual string containing module name of the
+               stacking unit. "
+        ::= { swUnitMgmtEntry 9 }        
+        
+        
+        
+-- ----------------------------------------------------------------------------------------------
+
+	--swEquipmentNotifyMgmt      OBJECT IDENTIFIER ::= { swDlinkEquipmentNotify 1 }  
+	swEquipmentNotification   OBJECT IDENTIFIER ::= { swDlinkEquipmentNotify 2 }          
+	
+	
+	--swEquipUnitNotification   OBJECT IDENTIFIER ::= { swEquipmentNotification 1 }         
+	swEquipPowerNotification   OBJECT IDENTIFIER ::= { swEquipmentNotification 2 }         
+			
+
+
+-- ----------------------------------------------------------------------------------------------	
+-- ----------------------------------------------------------------------------------------------
+	--swEquipUnitNotifyPrefix 	 OBJECT IDENTIFIER ::= { swEquipUnitNotification 0 } 	
+ 
+-- ----------------------------------------------------------------------------------------------
+
+	swEquipPowerNotifyPerfix 	 OBJECT IDENTIFIER ::= { swEquipPowerNotification 0 } 
+
+    swPowerFailure  NOTIFICATION-TYPE
+        OBJECTS         { swPowerUnitIndex,
+        					swPowerID,
+        					swPowerStatus
+                        }
+        STATUS          current
+        DESCRIPTION     "Power Failure notification."
+        ::= { swEquipPowerNotifyPerfix  2 }  
+        
+    swPowerRecover NOTIFICATION-TYPE
+        OBJECTS         {swPowerUnitIndex,
+        					 swPowerID,
+        					 swPowerStatus  
+                        }
+        STATUS          current
+        DESCRIPTION     "Power Recover notification."
+        ::= { swEquipPowerNotifyPerfix  3 }        
+
+
+-- ----------------------------------------------------------------------------------------------
+
+    swNotificationBindings OBJECT IDENTIFIER ::= { swDlinkEquipmentNotify 3 }
+                
+
+
+END
\ No newline at end of file
diff --git a/snmp_builder/mibs/DLINK-ID-REC-MIB.mib b/snmp_builder/mibs/DLINK-ID-REC-MIB.mib
new file mode 100644
index 0000000..1aa73cf
--- /dev/null
+++ b/snmp_builder/mibs/DLINK-ID-REC-MIB.mib
@@ -0,0 +1,50 @@
+-- D-Link Common MIBs
+-- DLINK-ID-REC
+-- -----------------------------------------------------------------------------
+-- Version 1.3
+-- 2009/1/15
+-- Modify syntax of AgentNotifyLevel
+-- for support 8 notification levels.
+-- by Green Zhu
+-- -----------------------------------------------------------------------------
+-- Version 1.2       
+-- 2008/8/11
+-- Add dlink-broadband-products and dlink-broadband-mgmt.
+-- by Green Zhu
+-- -----------------------------------------------------------------------------
+-- Version 1.1       
+-- 2004/7/6
+-- Modify syntax of AgentNotifyLevel
+-- by Karen
+-- ----------------------------------------------------------------------------- 
+-- Version 1.0.12  01-29-2002
+-- ----------------------------------------------------------------------------- 
+DLINK-ID-REC-MIB    DEFINITIONS ::= BEGIN
+    IMPORTS
+        enterprises    FROM RFC1155-SMI;
+        
+        
+    AgentNotifyLevel ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+        	"Notification  leveling."
+        SYNTAX  INTEGER {
+        	critical(0),
+        	warning(1),
+        	information(2),
+        	emergency(3),
+        	alert(4),                        	
+        	error(5),
+        	notice(6),
+            	debug(7)                               	
+     }	         
+
+    dlink    				  OBJECT IDENTIFIER ::= { enterprises 171 }
+    dlink-products    		  OBJECT IDENTIFIER ::= { dlink 10 }
+    dlink-mgmt    		   	  OBJECT IDENTIFIER ::= { dlink 11 }
+    dlink-common-mgmt    	  OBJECT IDENTIFIER ::= { dlink 12 }            
+    dlink-broadband-products  OBJECT IDENTIFIER ::= { dlink 30 }   
+    dlink-broadband-mgmt 	  OBJECT IDENTIFIER ::= { dlink 31 }  
+
+
+END
diff --git a/snmp_builder/mibs/DLSW-MIB.mib b/snmp_builder/mibs/DLSW-MIB.mib
new file mode 100644
index 0000000..e3c5c96
--- /dev/null
+++ b/snmp_builder/mibs/DLSW-MIB.mib
@@ -0,0 +1,3560 @@
+DLSW-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        DisplayString, RowStatus,
+        RowPointer, TruthValue,
+        TEXTUAL-CONVENTION                FROM SNMPv2-TC
+
+        Counter32, Gauge32, TimeTicks,
+        OBJECT-TYPE, MODULE-IDENTITY,
+        NOTIFICATION-TYPE, mib-2          FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP,
+        NOTIFICATION-GROUP                FROM SNMPv2-CONF
+        ifIndex                           FROM IF-MIB
+        sdlcLSAddress                     FROM SNA-SDLC-MIB;
+
+dlsw MODULE-IDENTITY
+    LAST-UPDATED  "9606040900Z"
+    ORGANIZATION  "AIW DLSw MIB RIGLET and IETF DLSw MIB Working Group"
+    CONTACT-INFO
+                  "David D. Chen
+                   IBM Corporation
+                   800 Park, Highway 54
+                   Research Triangle Park, NC 27709-9990
+                   Tel:    1 919 254 6182
+                   E-mail: dchen@vnet.ibm.com"
+   DESCRIPTION
+        "This MIB module contains objects to manage Data Link
+         Switches."
+::= { mib-2 46 }
+
+dlswMIB         OBJECT IDENTIFIER ::= { dlsw 1 }
+dlswDomains     OBJECT IDENTIFIER ::= { dlsw 2 }
+
+-- *******************************************************************
+-- Textual convention definitions
+-- *******************************************************************
+
+NBName ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+       "Represents a single qualified NetBIOS name, which can include
+        `don't care' and `wildcard' characters to represent a number
+        of real NetBIOS names.  If an individual character position in
+        the qualified name contains a `?', the corresponding character
+        position in a real NetBIOS name is a `don't care'.  If the
+        qualified name ends in `*', the remainder of a real NetBIOS
+        name is a `don't care'. `*' is only considered a wildcard if it
+        appears at the end of a name."
+    SYNTAX  OCTET STRING (SIZE (0..16))
+
+MacAddressNC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS       current
+    DESCRIPTION
+       "Represents an 802 MAC address represented in
+
+        non-canonical format.  That is, the most significant
+        bit will be transmitted first.  If this information
+        is not available, the value is a zero length string."
+    SYNTAX       OCTET STRING (SIZE (0 | 6))
+
+TAddress ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "Denotes a transport service address.
+        For dlswTCPDomain, a TAddress is 4 octets long,
+        containing the IP-address in network-byte order."
+    SYNTAX  OCTET STRING (SIZE (0..255))
+
+EndStationLocation ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "Representing the location of an end station related
+        to the managed DLSw node."
+    SYNTAX  INTEGER  {
+                other          (1),
+                internal       (2),  -- local virtual MAC address
+                remote         (3),  -- via DLSw partner
+                local          (4)   -- locally attached
+            }
+
+DlcType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "Representing the type of DLC of an end station, if
+        applicable."
+    SYNTAX  INTEGER  {
+                other          (1),  -- not assigned yet
+                na             (2),  -- not applicable
+                llc            (3),  -- 802.2 Logical Link Control
+                sdlc           (4),  -- SDLC
+                qllc           (5)   -- QLLC
+            }
+
+LFSize  ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "The largest size of the INFO field (including DLC header,
+        not including any MAC-level or framing octets).
+        64 valid values as defined by the IEEE 802.1D
+        Addendum are acceptable."
+    SYNTAX  INTEGER  {
+               lfs516(516), lfs635(635), lfs754(754), lfs873(873),
+               lfs993(993), lfs1112(1112), lfs1231(1231),
+               lfs1350(1350), lfs1470(1470), lfs1542(1542),
+               lfs1615(1615), lfs1688(1688), lfs1761(1761),
+               lfs1833(1833), lfs1906(1906), lfs1979(1979),
+               lfs2052(2052), lfs2345(2345), lfs2638(2638),
+               lfs2932(2932), lfs3225(3225), lfs3518(3518),
+               lfs3812(3812), lfs4105(4105), lfs4399(4399),
+               lfs4865(4865), lfs5331(5331), lfs5798(5798),
+               lfs6264(6264), lfs6730(6730), lfs7197(7197),
+               lfs7663(7663), lfs8130(8130), lfs8539(8539),
+               lfs8949(8949), lfs9358(9358), lfs9768(9768),
+               lfs10178(10178), lfs10587(10587), lfs10997(10997),
+               lfs11407(11407), lfs12199(12199), lfs12992(12992),
+               lfs13785(13785), lfs14578(14578), lfs15370(15370),
+               lfs16163(16163), lfs16956(16956), lfs17749(17749),
+               lfs20730(20730), lfs23711(23711), lfs26693(26693),
+               lfs29674(29674), lfs32655(32655), lfs38618(38618),
+               lfs41600(41600), lfs44591(44591), lfs47583(47583),
+               lfs50575(50575), lfs53567(53567), lfs56559(56559),
+               lfs59551(59551), lfs65535(65535)
+            }
+
+null OBJECT IDENTIFIER ::= { 0 0 }
+
+-- *******************************************************************
+-- DLSw Transport Domain definitions
+-- *******************************************************************
+
+-- DLSw over TCP
+dlswTCPDomain  OBJECT IDENTIFIER ::= { dlswDomains 1 }
+-- for an IP address of length 4:
+--
+-- octets   contents        encoding
+--  1-4     IP-address      network-byte order
+--
+DlswTCPAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d"
+    STATUS       current
+    DESCRIPTION
+            "Represents the IP address of a DLSw which uses
+             TCP as a transport protocol."
+    SYNTAX       OCTET STRING (SIZE (4))
+
+-- *******************************************************************
+-- DLSw MIB Definition
+-- *******************************************************************
+
+-- The DLSw MIB module contains an object part and a conformance part.
+-- Object part is organized in the following groups:
+-- (1) dlswNode      - information about this DLSw
+-- (2) dlswTConn     - about adjacent DLSw partners
+-- (3) dlswInterface - about which interfaces DLSw is active on
+-- (4) dlswDirectory - about any directory of local/remote resources
+-- (5) dlswCircuit   - about established circuits.
+-- (6) dlswSdlc      - about SDLC data link switched devices
+
+dlswNode        OBJECT IDENTIFIER ::= { dlswMIB 1 }
+dlswTConn       OBJECT IDENTIFIER ::= { dlswMIB 2 }
+dlswInterface   OBJECT IDENTIFIER ::= { dlswMIB 3 }
+dlswDirectory   OBJECT IDENTIFIER ::= { dlswMIB 4 }
+dlswCircuit     OBJECT IDENTIFIER ::= { dlswMIB 5 }
+dlswSdlc        OBJECT IDENTIFIER ::= { dlswMIB 6 }  -- SDLC
+
+-- *******************************************************************
+-- THE NODE GROUP
+-- *******************************************************************
+
+-- ===================================================================
+-- DLSw Node Identity
+-- ===================================================================
+dlswNodeVersion  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (2))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This value identifies the particular version of the DLSw
+        standard supported by this DLSw.  The first octet is a
+        hexadecimal value representing the DLSw standard Version
+        number of this DLSw, and the second is a hexadecimal value
+        representing the DLSw standard Release number. This
+        information is reported in DLSw Capabilities Exchange."
+    REFERENCE
+       "DLSW: Switch-to-Switch Protocol RFC 1795"
+    ::= { dlswNode 1 }
+
+dlswNodeVendorID  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (3))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The value identifies the manufacturer's IEEE-assigned
+        organizationally Unique Identifier (OUI) of this DLSw.
+        This information is reported in DLSw Capabilities
+        Exchange."
+    REFERENCE
+       "DLSW: Switch-to-Switch Protocol RFC 1795"
+    ::= { dlswNode 2 }
+
+dlswNodeVersionString  OBJECT-TYPE
+    SYNTAX     DisplayString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This string gives product-specific information about
+        this DLSw (e.g., product name, code release and fix level).
+        This flows in Capabilities Exchange messages."
+    REFERENCE
+       "DLSW: Switch-to-Switch Protocol RFC 1795"
+    ::= { dlswNode 3 }
+
+-- ===================================================================
+-- DLSw Code Capability
+-- ===================================================================
+dlswNodeStdPacingSupport  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+       none              (1),  -- does not support DLSw
+                               -- Standard pacing scheme
+       adaptiveRcvWindow (2),  -- the receive window size
+                               -- varies
+       fixedRcvWindow    (3)   -- the receive window size
+                               -- remains constant
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "Circuit pacing, as defined in the DLSw Standard, allows each
+        of the two DLSw nodes on a circuit to control the amount
+        of data the other is permitted to send to them.  This object
+        reflects the level of support the DLSw node has for this
+        protocol.  (1) means the node has no support for the standard
+        circuit pacing flows;  it may use RFC 1434+ methods only, or
+        a proprietary flow control scheme.  (2) means the node supports
+        the standard scheme and can vary the window sizes it grants as
+        a data receiver.  (3) means the node supports the standard
+        scheme but never varies its receive window size."
+    ::= { dlswNode 4 }
+
+-- ===================================================================
+-- DLSw Node Operational Objects
+--====================================================================
+dlswNodeStatus  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        active        (1),
+        inactive      (2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "The status of the DLSw part of the system.  Changing the
+        value from active to inactive causes DLSw to take
+        the following actions - (1) it disconnects all circuits
+        through all DLSw partners, (2) it disconnects all
+        transport connections to all DLSw partners, (3) it
+        disconnects all local DLC connections, and (4) it stops
+        processing all DLC connection set-up traffic.
+        Since these are destructive actions, the user should
+        query the circuit and transport connection tables in
+        advance to understand the effect this action will have.
+        Changing the value from inactive to active causes DLSw
+        to come up in its initial state, i.e., transport
+        connections established and ready to bring up circuits."
+    ::= { dlswNode 5 }
+
+dlswNodeUpTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The amount of time (in hundredths of a second) since
+        the DLSw portion of the system was last re-initialized.
+        That is, if dlswState is in the active state,
+        the time the dlswState entered the active state.
+        It will remain zero if dlswState is in the
+        inactive state."
+    ::= { dlswNode 6 }
+
+dlswNodeVirtualSegmentLFSize  OBJECT-TYPE
+    SYNTAX     LFSize
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "The largest frame size (including DLC header and info field
+        but not any MAC-level or framing octets) this DLSw can forward
+        on any path through itself.  This object can represent any box-
+        level frame size forwarding restriction (e.g., from the use
+        of fixed-size buffers).  Some DLSw implementations will have
+        no such restriction.
+
+        This value will affect the LF size of circuits during circuit
+        creation.  The LF size of an existing circuit can be found in
+
+        the RIF (Routing Information Field)."
+    DEFVAL  { lfs65535 }
+    ::= { dlswNode 7 }
+
+-- ...................................................................
+-- NETBIOS Resources
+-- ...................................................................
+
+dlswNodeResourceNBExclusivity  OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "The value of true indicates that the NetBIOS Names
+        configured in dlswDirNBTable are the only ones accessible
+        via this DLSw.
+
+        If a node supports sending run-time capabilities exchange
+        messages, changes to this object should cause that action.
+        It is up to the implementation exactly when to start the
+        run-time capabilities exchange."
+    ::= { dlswNode 8 }
+
+-- ...................................................................
+-- MAC Address List
+-- ...................................................................
+
+dlswNodeResourceMacExclusivity  OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "The value of true indicates that the MAC addresses
+        configured in the dlswDirMacTable are the only ones
+        accessible via this DLSw.
+
+        If a node supports sending run-time capabilities exchange
+        messages, changes to this object should cause that action.
+        It is up to the implementation exactly when to start the
+        run-time capabilities exchange."
+    ::= { dlswNode 9 }
+
+-- *******************************************************************
+-- TRANSPORT CONNECTION (aka: PARTNER DLSW)
+-- *******************************************************************
+
+-- ===================================================================
+
+-- Transport Connection Statistics Objects
+-- ===================================================================
+dlswTConnStat    OBJECT IDENTIFIER ::= { dlswTConn 1 }
+
+dlswTConnStatActiveConnections  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of transport connections that are not in
+        `disconnected' state."
+    ::= { dlswTConnStat 1 }
+
+dlswTConnStatCloseIdles  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times transport connections in this node
+        exited the connected state with zero active circuits on
+        the transport connection."
+    ::= { dlswTConnStat 2 }
+
+dlswTConnStatCloseBusys  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times transport connections in this node
+        exited the connected state with some non-zero number
+        of active circuits on the transport connection.  Normally
+        this means the transport connection failed unexpectedly."
+    ::= { dlswTConnStat 3 }
+
+-- ===================================================================
+-- Transport Connection Configuration Table
+-- ===================================================================
+dlswTConnConfigTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswTConnConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table defines the transport connections
+        that will be initiated or accepted by this
+        DLSw.  Structure of masks allows wildcard
+        definition for a collection of transport
+        connections by a conceptual row.  For a
+        specific transport connection, there may
+
+        be multiple of conceptual rows match the
+        transport address.  The `best' match will
+        the one to determine the characteristics
+        of the transport connection."
+    ::= { dlswTConn 2 }
+
+dlswTConnConfigEntry  OBJECT-TYPE
+    SYNTAX     DlswTConnConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Each conceptual row defines a collection of
+        transport connections."
+    INDEX   { dlswTConnConfigIndex }
+    ::= { dlswTConnConfigTable 1 }
+
+DlswTConnConfigEntry ::= SEQUENCE {
+    dlswTConnConfigIndex              INTEGER,
+    dlswTConnConfigTDomain            OBJECT IDENTIFIER,
+    dlswTConnConfigLocalTAddr         TAddress,
+    dlswTConnConfigRemoteTAddr        TAddress,
+    dlswTConnConfigLastModifyTime     TimeTicks,
+    dlswTConnConfigEntryType          INTEGER,
+    dlswTConnConfigGroupDefinition    RowPointer,
+    dlswTConnConfigSetupType          INTEGER,
+    dlswTConnConfigSapList            OCTET STRING,
+    dlswTConnConfigAdvertiseMacNB     TruthValue,
+    dlswTConnConfigInitCirRecvWndw    INTEGER,
+    dlswTConnConfigOpens              Counter32,
+    dlswTConnConfigRowStatus          RowStatus
+    }
+
+dlswTConnConfigIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The index to the conceptual row of the table.
+        Negative numbers are not allowed.  There
+        are objects defined that point to conceptual
+        rows of this table with this index value.
+        Zero is used to denote that no corresponding
+        row exists.
+
+        Index values are assigned by the agent, and
+        should not be reused but should continue to
+        increase in value."
+    ::= { dlswTConnConfigEntry 1 }
+
+dlswTConnConfigTDomain  OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The object identifier which indicates the transport
+        domain of this conceptual row."
+    ::= { dlswTConnConfigEntry 2 }
+
+dlswTConnConfigLocalTAddr  OBJECT-TYPE
+    SYNTAX     TAddress
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The local transport address for this conceptual row
+        of the transport connection definition."
+    ::= { dlswTConnConfigEntry 3 }
+
+dlswTConnConfigRemoteTAddr  OBJECT-TYPE
+    SYNTAX     TAddress
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The remote transport address.  Together with
+        dlswTConnConfigEntryType and dlswTConnConfigGroupDefinition,
+        the object instance of this conceptual row identifies a
+        collection of the transport connections that will be
+        either initiated by this DLSw or initiated by a partner
+        DLSw and accepted by this DLSw."
+    ::= { dlswTConnConfigEntry 4 }
+
+dlswTConnConfigLastModifyTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The time (in hundredths of a second) since the value of
+        any object in this conceptual row except for
+        dlswTConnConfigOpens was last changed.  This value
+        may be compared to dlswTConnOperConnectTime to
+        determine whether values in this row are completely
+        valid for a transport connection created using
+        this row definition."
+    ::= { dlswTConnConfigEntry 5 }
+
+dlswTConnConfigEntryType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+
+        individual     (1),
+        global         (2),
+        group          (3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The object instance signifies the type of entry in the
+        associated conceptual row.  The value of `individual'
+        means that the entry applies to a specific partner DLSw
+        node as identified by dlswTConnConfigRemoteTAddr and
+        dlswTConnConfigTDomain.  The value of `global'
+        means that the entry applies to all partner DLSw nodes
+        of the TDomain.  The value of 'group' means that the entry
+        applies to a specific set of DLSw nodes in the TDomain.
+        Any group definitions are enterprise-specific and are pointed
+        to by dlswTConnConfigGroupDefinition.  In the cases of
+        `global' and `group', the value in dlswTConnConfigRemoteTAddr
+        may not have any significance."
+    ::= { dlswTConnConfigEntry 6 }
+
+dlswTConnConfigGroupDefinition OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "For conceptual rows of `individual' and `global' as
+        specified in dlswTConnConfigEntryType, the instance
+        of this object is  `0.0'.  For conceptual rows of
+        `group', the instance points to the specific
+        group definition."
+    ::= { dlswTConnConfigEntry 7 }
+
+dlswTConnConfigSetupType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        other              (1),
+        activePersistent   (2),
+        activeOnDemand     (3),
+        passive            (4),
+        excluded           (5)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This value of the instance of a conceptual row
+        identifies the behavior of the collection of
+        transport connections that this conceptual row
+
+        defines.  The value of activePersistent, activeOnDemand
+        and passive means this DLSw will accept any transport
+        connections, initiated by partner DLSw nodes, which
+        are defined by this conceptual row.  The value of
+        activePersistent means this DLSw will also initiate
+        the transport connections of this conceptual row and
+        retry periodically if necessary.  The value of
+        activeOnDemand means this DLSw will initiate a
+        transport connection of this conceptual row, if
+        there is a directory cache hits.  The value of
+        other is implementation specific.  The value of exclude
+        means that the specified node is not allowed to be
+        a partner to this DLSw node.  To take a certain
+        conceptual row definition out of service, a value of
+        notInService for dlswTConnConfigRowStatus should be
+        used."
+    DEFVAL  { passive }
+    ::= { dlswTConnConfigEntry 8 }
+
+dlswTConnConfigSapList  OBJECT-TYPE
+    SYNTAX     OCTET STRING  (SIZE(16))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The SAP list indicates which SAPs are advertised to
+        the transport connection defined by this conceptual
+        row.  Only SAPs with even numbers are represented,
+        in the form of the most significant bit of the first
+        octet representing the SAP 0, the next most significant
+        bit representing the SAP 2, to the least significant
+        bit of the last octet representing the SAP 254.  Data
+        link switching is allowed for those SAPs which have
+        one in its corresponding bit, not allowed otherwise.
+        The whole SAP list has to be changed together.  Changing
+        the SAP list affects only new circuit establishments
+        and has no effect on established circuits.
+
+        This list can be used to restrict specific partners
+        from knowing about all the SAPs used by DLSw on all its
+        interfaces (these are represented in dlswIfSapList for
+        each interface).  For instance, one may want to run NetBIOS
+        with some partners but not others.
+
+        If a node supports sending run-time capabilities exchange
+        messages, changes to this object should cause that action.
+        When to start the run-time capabilities exchange is
+        implementation-specific.
+
+        The DEFVAL below indicates support for SAPs 0, 4, 8, and C."
+    DEFVAL  { 'AA000000000000000000000000000000'H }
+    ::= { dlswTConnConfigEntry 9 }
+
+dlswTConnConfigAdvertiseMacNB  OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The value of true indicates that any defined local MAC
+         addresses and NetBIOS names will be advertised to a
+         partner node via initial and (if supported) run-time
+         capabilities exchange messages.  The DLSw node should send
+         the appropriate exclusivity control vector to accompany
+         each list it sends, or to represent that the node is
+         explicitly configured to have a null list.
+
+         The value of false indicates that the DLSw node should not
+         send a MAC address list or NetBIOS name list, and should
+         also not send their corresponding exclusivity control
+         vectors."
+    DEFVAL  { true }
+    ::= { dlswTConnConfigEntry 10 }
+
+dlswTConnConfigInitCirRecvWndw  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    UNITS      "SSP messages"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The initial circuit receive pacing window size, in the unit
+        of SSP messages, to be used for future transport connections
+        activated using this table row.  The managed node sends this
+        value as its initial receive pacing window in its initial
+        capabilities exchange message.  Changing this value does not
+        affect the initial circuit receive pacing window size of
+        currently active transport connections.  If the standard window
+        pacing scheme is not supported, the value is zero.
+
+        A larger receive window value may be appropriate for partners
+        that are reachable only via physical paths that have longer
+        network delays."
+    DEFVAL  { 1 }
+    ::= { dlswTConnConfigEntry 11 }
+
+dlswTConnConfigOpens  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "Number of times transport connections entered
+        connected state according to the definition of
+        this conceptual row."
+    ::= { dlswTConnConfigEntry 12 }
+
+dlswTConnConfigRowStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object is used by the manager to create
+        or delete the row entry in the dlswTConnConfigTable
+        following the RowStatus textual convention.  The value
+        of notInService will be used to take a conceptual
+        row definition out of use."
+    ::= { dlswTConnConfigEntry 13 }
+
+-- ===================================================================
+-- Transport Connection Operation Table
+-- ===================================================================
+-- (1) At most one transport connection can be connected between
+--     this DLSw and one of its DLSw partners at a given time.
+-- (2) Multiple transport types are supported.
+-- (3) Since the entries may be reused, dlswTConnOperEntryTime
+--     needs to be consulted for the possibility of counter reset.
+-- ===================================================================
+
+dlswTConnOperTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswTConnOperEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "A list of transport connections.   It is optional but
+        desirable for the agent to keep an entry for some
+        period of time after the transport connection is
+        disconnected.  This allows the manager to capture
+        additional useful information about the connection, in
+        particular, statistical information and the cause of the
+        disconnection."
+    ::= { dlswTConn 3 }
+
+dlswTConnOperEntry  OBJECT-TYPE
+    SYNTAX     DlswTConnOperEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       ""
+    INDEX   { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr }
+    ::= { dlswTConnOperTable 1 }
+
+DlswTConnOperEntry ::= SEQUENCE {
+    dlswTConnOperTDomain                  OBJECT IDENTIFIER,
+    dlswTConnOperLocalTAddr               TAddress,
+    dlswTConnOperRemoteTAddr              TAddress,
+    dlswTConnOperEntryTime                TimeTicks,
+    dlswTConnOperConnectTime              TimeTicks,
+    dlswTConnOperState                    INTEGER,
+    dlswTConnOperConfigIndex              INTEGER,
+    dlswTConnOperFlowCntlMode             INTEGER,
+    dlswTConnOperPartnerVersion           OCTET STRING,
+    dlswTConnOperPartnerVendorID          OCTET STRING,
+    dlswTConnOperPartnerVersionStr        DisplayString,
+    dlswTConnOperPartnerInitPacingWndw    INTEGER,
+    dlswTConnOperPartnerSapList           OCTET STRING,
+    dlswTConnOperPartnerNBExcl            TruthValue,
+    dlswTConnOperPartnerMacExcl           TruthValue,
+    dlswTConnOperPartnerNBInfo            INTEGER,
+    dlswTConnOperPartnerMacInfo           INTEGER,
+    dlswTConnOperDiscTime                 TimeTicks,
+    dlswTConnOperDiscReason               INTEGER,
+    dlswTConnOperDiscActiveCir            INTEGER,
+    dlswTConnOperInDataPkts               Counter32,
+    dlswTConnOperOutDataPkts              Counter32,
+    dlswTConnOperInDataOctets             Counter32,
+    dlswTConnOperOutDataOctets            Counter32,
+    dlswTConnOperInCntlPkts               Counter32,
+    dlswTConnOperOutCntlPkts              Counter32,
+    dlswTConnOperCURexSents               Counter32,
+    dlswTConnOperICRexRcvds               Counter32,
+    dlswTConnOperCURexRcvds               Counter32,
+    dlswTConnOperICRexSents               Counter32,
+    dlswTConnOperNQexSents                Counter32,
+    dlswTConnOperNRexRcvds                Counter32,
+    dlswTConnOperNQexRcvds                Counter32,
+    dlswTConnOperNRexSents                Counter32,
+    dlswTConnOperCirCreates               Counter32,
+    dlswTConnOperCircuits                 Gauge32
+    }
+
+dlswTConnOperTDomain  OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The object identifier indicates the transport domain
+        of this transport connection."
+    ::= { dlswTConnOperEntry 1 }
+
+dlswTConnOperLocalTAddr  OBJECT-TYPE
+    SYNTAX     TAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The local transport address for this transport connection.
+        This value could be different from dlswTConnConfigLocalAddr,
+        if the value of the latter were changed after this transport
+        connection was established."
+    ::= { dlswTConnOperEntry 2 }
+
+dlswTConnOperRemoteTAddr  OBJECT-TYPE
+    SYNTAX     TAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The remote transport address of this transport connection."
+    ::= { dlswTConnOperEntry 3 }
+
+dlswTConnOperEntryTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The amount of time (in hundredths of a second) since this
+        transport connection conceptual row was created."
+    ::= { dlswTConnOperEntry 4 }
+
+-- ...................................................................
+-- DLSw Transport Connection Operational Objects
+-- ...................................................................
+
+dlswTConnOperConnectTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The amount of time (in hundredths of a second) since this
+        transport connection last entered the 'connected' state.
+        A value of zero means this transport connection has never
+        been established."
+    ::= { dlswTConnOperEntry 5 }
+
+dlswTConnOperState  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        connecting         (1),
+        initCapExchange    (2),
+        connected          (3),
+        quiescing          (4),
+        disconnecting      (5),
+        disconnected       (6)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "The state of this transport connection.  The transport
+        connection enters `connecting' state when DLSw makes
+        a connection request to the transport layer.  Once initial
+        Capabilities Exchange is sent, the transport connection
+        enters enters `initCapExchange' state.  When partner
+        capabilities have been determined and the transport
+        connection is ready for sending CanUReach (CUR) messages,
+        it moves to the `connected' state.  When DLSw is in the
+        process of bringing down the connection, it is in the
+        `disconnecting' state.  When the transport layer
+        indicates one of its connections is disconnected, the
+        transport connection moves to the `disconnected' state.
+
+        Whereas all of the values will be returned in response
+        to a management protocol retrieval operation, only two
+        values may be specified in a management protocol set
+        operation: `quiescing' and `disconnecting'.  Changing
+        the value to `quiescing' prevents new circuits from being
+        established, and will cause a transport disconnect when
+        the last circuit on the connection goes away.  Changing
+        the value to `disconnecting' will force off all circuits
+        immediately and bring the connection to `disconnected'
+        state."
+    ::= { dlswTConnOperEntry 6 }
+
+dlswTConnOperConfigIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The value of dlswTConnConfigIndex of the dlswTConnConfigEntry
+        that governs the configuration information used by this
+        dlswTConnOperEntry.  The manager can therefore normally
+        examine both configured and operational information
+        for this transport connection.
+
+        This value is zero if the corresponding dlswTConnConfigEntry
+        was deleted after the creation of this dlswTConnOperEntry.
+        If some fields in the former were changed but the conceptual
+        row was not deleted, some configuration information may not
+        be valid for this operational transport connection.  The
+        manager can compare dlswTConnOperConnectTime and
+        dlswTConnConfigLastModifyTime to determine if this condition
+        exists."
+    ::= { dlswTConnOperEntry 7 }
+
+-- ...................................................................
+-- Transport Connection Characteristics
+-- ...................................................................
+
+dlswTConnOperFlowCntlMode  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+       undetermined   (1),
+       pacing         (2),   -- DLSw standard flow control
+       other          (3)    -- non-DLSw standard flow control
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The flow control mechanism in use on this transport connection.
+        This value is undetermined (1) before the mode of flow control
+        can be established on a new transport connection (i.e., after
+        CapEx is sent but before Capex or other SSP control messages
+        have been received).  Pacing (2) indicates that the standard
+        RFC 1795 pacing mechanism is in use.  Other (3) may be either
+        the RFC 1434+ xBusy mechanism operating to a back-level DLSw,
+        or a vendor-specific flow control method.  Whether it is xBusy
+        or not can be inferred from dlswTConnOperPartnerVersion."
+    ::= { dlswTConnOperEntry 8 }
+
+-- ...................................................................
+
+dlswTConnOperPartnerVersion  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 2))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This value identifies which version (first octet) and release
+        (second octet) of the DLSw standard is supported by this
+        partner DLSw. This information is obtained from a DLSw
+        capabilities exchange message received from the partner DLSw.
+        A string of zero length is returned before a Capabilities
+        Exchange message is received, or if one is never received.
+        A conceptual row with a dlswTConnOperState of `connected' but
+        a zero length partner version indicates that the partner is
+        a non-standard DLSw partner.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    REFERENCE
+       "DLSW: Switch-to-Switch Protocol RFC 1795"
+    ::= { dlswTConnOperEntry 9 }
+
+dlswTConnOperPartnerVendorID  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 3))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This value identifies the IEEE-assigned organizationally
+        Unique Identifier (OUI) of the maker of this partner
+        DLSw.  This information is obtained from a DLSw
+        capabilities exchange message received from the partner DLSw.
+        A string of zero length is returned before a Capabilities
+        Exchange message is received, or if one is never received.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    ::= { dlswTConnOperEntry 10 }
+
+dlswTConnOperPartnerVersionStr  OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..253))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This value identifies the particular product version (e.g.,
+        product name, code level, fix level) of this partner DLSw.
+        The format of the actual version string is vendor-specific.
+        This information is obtained from a DLSw capabilities exchange
+        message received from the partner DLSw.
+        A string of zero length is returned before a Capabilities
+        Exchange message is received, if one is never received, or
+        if one is received but it does not contain a version string.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    REFERENCE
+       "DLSW: Switch-to-Switch Protocol RFC 1795"
+    ::= { dlswTConnOperEntry 11 }
+
+dlswTConnOperPartnerInitPacingWndw  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The value of the partner initial receive pacing window.  This
+        is our initial send pacing window for all new circuits on this
+        transport connection, as modified and granted by the first flow
+        control indication the partner sends on each circuit.
+        This information is obtained from a DLSw capabilities exchange
+        message received from the partner DLSw.
+        A value of zero is returned before a Capabilities
+        Exchange message is received, or if one is never received.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    REFERENCE
+       "DLSW: Switch-to-Switch Protocol RFC 1795"
+    ::= { dlswTConnOperEntry 12 }
+
+-- ...................................................................
+
+dlswTConnOperPartnerSapList  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The Supported SAP List received in the capabilities
+        exchange message from the partner DLSw.  This list has
+        the same format described for dlswTConnConfigSapList.
+        A string of zero length is returned before a Capabilities
+        Exchange message is received, or if one is never received.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    ::= { dlswTConnOperEntry 13 }
+
+dlswTConnOperPartnerNBExcl  OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The value of true signifies that the NetBIOS names received
+        from this partner in the NetBIOS name list in its capabilities
+        exchange message are the only NetBIOS names reachable by
+        that partner.  `False' indicates that other NetBIOS names may
+        be reachable.  `False' should be returned before a Capabilities
+        Exchange message is received, if one is never received, or if
+        one is received without a NB Name Exclusivity CV.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    ::= { dlswTConnOperEntry 14 }
+
+dlswTConnOperPartnerMacExcl  OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The value of true signifies that the MAC addresses received
+        from this partner in the MAC address list in its capabilities
+        exchange message are the only MAC addresses reachable by
+        that partner.  `False' indicates that other MAC addresses may
+        be reachable.  `False' should be returned before a Capabilities
+        Exchange message is received, if one is never received, or if
+        one is received without a MAC Address Exclusivity CV.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    ::= { dlswTConnOperEntry 15 }
+
+dlswTConnOperPartnerNBInfo  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+       none           (1),  -- none is kept
+       partial        (2),  -- partial list is kept
+       complete       (3),  -- complete list is kept
+       notApplicable  (4)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "It is up to this DSLw whether to keep either none, some,
+        or all of the NetBIOS name list that was received in
+        the capabilities exchange message sent by this partner DLSw.
+        This object identifies how much information was kept by
+        this DLSw.  These names are stored as userConfigured
+        remote entries in dlswDirNBTable.
+        A value of (4), notApplicable, should be returned before
+        a Capabilities Exchange message is received, or if one is
+        never received.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    ::= { dlswTConnOperEntry 16 }
+
+dlswTConnOperPartnerMacInfo  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+       none           (1),  -- none is kept
+       partial        (2),  -- partial list is kept
+       complete       (3),  -- complete list is kept
+       notApplicable  (4)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "It is up to this DLSw whether to keep either none, some,
+        or all of the MAC address list that was received in the
+        capabilities exchange message sent by this partner DLSw.
+        This object identifies how much information was kept by
+        this DLSw.  These names are stored as userConfigured
+        remote entries in dlswDirMACTable.
+        A value of (4), notApplicable, should be returned before
+        a Capabilities Exchange message is received, or if one is
+        never received.
+
+        If an implementation chooses to keep dlswTConnOperEntrys in
+        the `disconnected' state, this value should remain unchanged."
+    ::= { dlswTConnOperEntry 17 }
+
+-- ...................................................................
+-- Information about the last disconnect of this transport connection.
+--   These objects make sense only for implementations that keep
+--   transport connection information around after disconnection.
+-- ...................................................................
+dlswTConnOperDiscTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The amount of time (in hundredths of a second) since the
+        dlswTConnOperState last entered `disconnected' state."
+    ::= { dlswTConnOperEntry 18 }
+
+dlswTConnOperDiscReason  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        other              (1),
+        capExFailed        (2),
+        transportLayerDisc (3),
+        operatorCommand    (4),
+        lastCircuitDiscd   (5),
+        protocolError      (6)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This object signifies the reason that either prevented the
+        transport connection from entering the connected state, or
+        caused the transport connection to enter the disconnected
+        state."
+    ::= { dlswTConnOperEntry 19 }
+
+dlswTConnOperDiscActiveCir  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of circuits active (not in DISCONNECTED state)
+        at the time the transport connection was last disconnected.
+        This value is zero if the transport connection has never
+        been connected."
+    ::= { dlswTConnOperEntry 20 }
+
+-- ...................................................................
+-- Transport Connection Statistics
+-- (1) Traffic counts
+-- ...................................................................
+dlswTConnOperInDataPkts  OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "SSP messages"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Switch-to-Switch Protocol (SSP) messages of
+        type DGRMFRAME, DATAFRAME, or INFOFRAME received on this
+        transport connection."
+    ::= { dlswTConnOperEntry 21 }
+
+dlswTConnOperOutDataPkts  OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "SSP messages"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Switch-to-Switch Protocol (SSP) messages of
+        type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this
+        transport connection."
+    ::= { dlswTConnOperEntry 22 }
+
+dlswTConnOperInDataOctets  OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number octets in Switch-to-Switch Protocol (SSP) messages
+        of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this
+        transport connection.  Each message is counted starting with
+        the first octet following the SSP message header."
+    ::= { dlswTConnOperEntry 23 }
+
+dlswTConnOperOutDataOctets  OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number octets in Switch-to-Switch Protocol (SSP) messages
+        of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this
+        transport connection.  Each message is counted starting with
+        the first octet following the SSP message header."
+    ::= { dlswTConnOperEntry 24 }
+
+dlswTConnOperInCntlPkts  OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "SSP messages"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Switch-to-Switch Protocol (SSP) messages
+        received on this transport connection which were not of
+        type DGRMFRAME, DATAFRAME, or INFOFRAME."
+    ::= { dlswTConnOperEntry 25 }
+
+dlswTConnOperOutCntlPkts  OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "SSP messages"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Switch-to-Switch Protocol (SSP) messages of
+        transmitted on this transport connection which were not of
+        type DGRMFRAME, DATAFRAME, or INFOFRAME."
+    ::= { dlswTConnOperEntry 26 }
+
+-- ...................................................................
+-- (2) Directory activities (Explorer messages)
+-- ...................................................................
+
+dlswTConnOperCURexSents  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of CanUReach_ex messages sent on this transport
+        connection."
+    ::= { dlswTConnOperEntry 27 }
+
+dlswTConnOperICRexRcvds  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of ICanReach_ex messages received on this transport
+        connection."
+    ::= { dlswTConnOperEntry 28 }
+
+dlswTConnOperCURexRcvds  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of CanUReach_ex messages received on this transport
+        connection."
+    ::= { dlswTConnOperEntry 29 }
+
+dlswTConnOperICRexSents  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of ICanReach_ex messages sent on this transport
+        connection."
+    ::= { dlswTConnOperEntry 30 }
+
+-- ...................................................................
+
+dlswTConnOperNQexSents  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer)
+
+        messages sent on this transport connection."
+    ::= { dlswTConnOperEntry 31 }
+
+dlswTConnOperNRexRcvds  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer)
+        messages received on this transport connection."
+    ::= { dlswTConnOperEntry 32 }
+
+dlswTConnOperNQexRcvds  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of NETBIOS_NQ_ex messages received on this
+        transport connection."
+    ::= { dlswTConnOperEntry 33 }
+
+dlswTConnOperNRexSents  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of NETBIOS_NR_ex messages sent on this transport
+        connection."
+    ::= { dlswTConnOperEntry 34 }
+
+-- ...................................................................
+-- (3) Circuit activities on each transport connection
+-- ...................................................................
+dlswTConnOperCirCreates  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times that circuits entered `circuit_established'
+        state (not counting transitions from `circuit_restart')."
+    ::= { dlswTConnOperEntry 35 }
+
+dlswTConnOperCircuits  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of currently active circuits on this transport
+
+        connection, where `active' means not in `disconnected' state."
+    ::= { dlswTConnOperEntry 36 }
+
+-- ===================================================================
+-- Transport Connection Specific
+-- ===================================================================
+dlswTConnSpecific OBJECT IDENTIFIER ::= { dlswTConn 4 }
+dlswTConnTcp      OBJECT IDENTIFIER ::= { dlswTConnSpecific 1 }
+
+-- ...................................................................
+-- TCP Transport Connection Specific - Configuration
+-- ...................................................................
+dlswTConnTcpConfigTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswTConnTcpConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table defines the TCP transport connections that
+        will be either initiated by or accepted by this DSLw.
+        It augments the entries in dlswTConnConfigTable whose domain
+        is dlswTCPDomain."
+    ::= { dlswTConnTcp 1 }
+
+dlswTConnTcpConfigEntry  OBJECT-TYPE
+    SYNTAX     DlswTConnTcpConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Each conceptual row defines parameters that are
+        specific to dlswTCPDomain transport connections."
+    INDEX   { dlswTConnConfigIndex }
+    ::= { dlswTConnTcpConfigTable 1 }
+
+DlswTConnTcpConfigEntry ::= SEQUENCE {
+    dlswTConnTcpConfigKeepAliveInt       INTEGER,
+    dlswTConnTcpConfigTcpConnections     INTEGER,
+    dlswTConnTcpConfigMaxSegmentSize     INTEGER
+    }
+
+dlswTConnTcpConfigKeepAliveInt  OBJECT-TYPE
+    SYNTAX     INTEGER (0..1800)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The time in seconds between TCP keepAlive messages when
+        no traffic is flowing.  Zero signifies no keepAlive protocol.
+
+        Changes take effect only for new TCP connections."
+    DEFVAL  { 0 }
+    ::= { dlswTConnTcpConfigEntry 1 }
+
+dlswTConnTcpConfigTcpConnections  OBJECT-TYPE
+    SYNTAX     INTEGER (1..16)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This is our preferred number of TCP connections within a
+        TCP transport connection.  The actual number used is negotiated
+        at capabilities exchange time. Changes take effect only
+        for new transport connections."
+    DEFVAL  { 2 }
+    ::= { dlswTConnTcpConfigEntry 2 }
+
+dlswTConnTcpConfigMaxSegmentSize  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    UNITS      "packets"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This is the number of bytes that this node is
+        willing to receive over the read TCP connection(s).
+        Changes take effect for new transport connections."
+    DEFVAL  { 4096 }
+    ::= { dlswTConnTcpConfigEntry 3 }
+
+-- ...................................................................
+-- TCP Transport Connection Specific - Operation
+-- ...................................................................
+dlswTConnTcpOperTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswTConnTcpOperEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "A list of TCP transport connections.   It is optional
+        but desirable for the agent to keep an entry for some
+        period of time after the transport connection is
+        disconnected.  This allows the manager to capture
+        additional useful information about the connection, in
+        particular, statistical information and the cause of the
+        disconnection."
+    ::= { dlswTConnTcp 2 }
+
+dlswTConnTcpOperEntry  OBJECT-TYPE
+    SYNTAX     DlswTConnTcpOperEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       ""
+    INDEX   { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr }
+    ::= { dlswTConnTcpOperTable 1 }
+
+DlswTConnTcpOperEntry ::= SEQUENCE {
+    dlswTConnTcpOperKeepAliveInt             INTEGER,
+    dlswTConnTcpOperPrefTcpConnections       INTEGER,
+    dlswTConnTcpOperTcpConnections           INTEGER
+    }
+
+dlswTConnTcpOperKeepAliveInt  OBJECT-TYPE
+    SYNTAX     INTEGER (0..1800)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The time in seconds between TCP keepAlive messages when
+        no traffic is flowing.  Zero signifies no keepAlive protocol is
+        operating."
+    ::= { dlswTConnTcpOperEntry 1 }
+
+dlswTConnTcpOperPrefTcpConnections  OBJECT-TYPE
+    SYNTAX     INTEGER (1..16)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This is the number of TCP connections preferred by this DLSw
+        partner, as received in its capabilities exchange message."
+    ::= { dlswTConnTcpOperEntry 2 }
+
+dlswTConnTcpOperTcpConnections  OBJECT-TYPE
+    SYNTAX     INTEGER (1..16)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This is the actual current number of TCP connections within
+        this transport connection."
+    ::= { dlswTConnTcpOperEntry 3 }
+
+-- *******************************************************************
+-- DLSW INTERFACE GROUP
+-- *******************************************************************
+
+dlswIfTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The list of interfaces on which DLSw is active."
+    ::= { dlswInterface 1 }
+
+dlswIfEntry  OBJECT-TYPE
+    SYNTAX     DlswIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       ""
+    INDEX   { ifIndex }
+    ::= { dlswIfTable 1 }
+
+DlswIfEntry ::= SEQUENCE {
+    dlswIfRowStatus      RowStatus,
+    dlswIfVirtualSegment INTEGER,
+    dlswIfSapList        OCTET STRING
+    }
+
+dlswIfRowStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object is used by the manager to create
+        or delete the row entry in the dlswIfTable
+        following the RowStatus textual convention."
+    ::= { dlswIfEntry 1 }
+
+dlswIfVirtualSegment  OBJECT-TYPE
+    SYNTAX     INTEGER (0..4095 | 65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The segment number that uniquely identifies the virtual
+        segment to which this DLSw interface is connected.
+        Current source routing protocols limit this value to
+        the range 0 - 4095. (The value 0 is used by some
+        management applications for special test cases.)
+        A value of 65535 signifies that no virtual segment
+        is assigned to this interface.  For instance,
+        in a non-source routing environment, segment number
+        assignment is not required."
+    DEFVAL { 65535 }
+    ::= { dlswIfEntry 2 }
+
+dlswIfSapList  OBJECT-TYPE
+    SYNTAX     OCTET STRING  (SIZE(16))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The SAP list indicates which SAPs are allowed to be
+        data link switched through this interface.  This list
+        has the same format described for dlswTConnConfigSapList.
+
+        When changes to this object take effect is implementation-
+        specific.  Turning off a particular SAP can destroy
+        active circuits that are using that SAP.  An agent
+        implementation may reject such changes until there are no
+        active circuits if it so chooses.  In this case, it is up
+        to the manager to close the circuits first, using
+        dlswCircuitState.
+
+        The DEFVAL below indicates support for SAPs 0, 4, 8, and C."
+    DEFVAL  { 'AA000000000000000000000000000000'H }
+    ::= { dlswIfEntry 3 }
+
+-- *******************************************************************
+-- DIRECTORY
+-- Directory services caches the locations of MAC addresses
+-- and NetBIOS names.  For resources which are attached via
+-- local interfaces, the ifIndex may be cached, and for
+-- resources which are reachable via a DLSw partner, the
+-- transport address of the DLSw partner is cached.
+-- *******************************************************************
+
+-- ===================================================================
+-- Directory Related Statistical Objects
+-- ===================================================================
+dlswDirStat     OBJECT IDENTIFIER ::= { dlswDirectory 1 }
+
+dlswDirMacEntries  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The current total number of entries in the dlswDirMacTable."
+    ::= { dlswDirStat 1 }
+
+dlswDirMacCacheHits  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times a cache search for a particular MAC address
+        resulted in success."
+    ::= { dlswDirStat 2 }
+
+dlswDirMacCacheMisses  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times a cache search for a particular MAC address
+        resulted in failure."
+    ::= { dlswDirStat 3 }
+
+dlswDirMacCacheNextIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The next value of dlswDirMacIndex to be assigned by
+        the agent.  A retrieval of this object atomically reserves
+        the returned value for use by the manager to create a row
+        in dlswDirMacTable.  This makes it possible for the agent
+        to control the index space of the MAC address cache, yet
+        allows the manager to administratively create new rows."
+    ::= { dlswDirStat 4 }
+
+dlswDirNBEntries  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The current total number of entries in the dlswDirNBTable."
+    ::= { dlswDirStat 5 }
+
+dlswDirNBCacheHits  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times a cache search for a particular NetBIOS
+        name resulted in success."
+    ::= { dlswDirStat 6 }
+
+dlswDirNBCacheMisses  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of times a cache search for a particular NetBIOS
+        name resulted in failure."
+    ::= { dlswDirStat 7 }
+
+dlswDirNBCacheNextIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The next value of dlswDirNBIndex to be assigned by the
+        agent.  A retrieval of this object atomically reserves
+        the returned value for use by the manager to create
+        a row in dlswDirNBTable.  This makes it possible for the
+        agent to control the index space for the NetBIOS name
+        cache, yet allows the manager to administratively
+        create new rows."
+    ::= { dlswDirStat 8 }
+
+-- ===================================================================
+-- Directory Cache
+-- ===================================================================
+dlswDirCache     OBJECT IDENTIFIER ::= { dlswDirectory 2 }
+
+-- ...................................................................
+-- Directory for MAC Addresses.
+-- All Possible combinations of values of these objects.
+--
+--     EntryType   LocationType       Location        Status
+--  ============== ============ ================== ==============
+--  userConfigured    local     ifEntry or 0.0     reachable, or
+--                                                 notReachable, or
+--                                                 unknown
+--  userConfigured    remote    TConnConfigEntry   reachable, or
+--                                                 notReachable, or
+--                                                 unknown
+--  partnerCapExMsg   remote    TConnOperEntry     unknown
+--  dynamic           local     ifEntry or 0.0     reachable
+--  dynamic           remote    TConnOperEntry     reachable
+--
+-- ...................................................................
+dlswDirMacTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswDirMacEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table contains locations of MAC addresses.
+        They could be either verified or not verified,
+        local or remote, and configured locally or learned
+        from either Capabilities Exchange messages or
+        directory searches."
+    ::= { dlswDirCache 1 }
+
+dlswDirMacEntry  OBJECT-TYPE
+    SYNTAX     DlswDirMacEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Indexed by dlswDirMacIndex."
+    INDEX   { dlswDirMacIndex }
+    ::= { dlswDirMacTable 1 }
+
+DlswDirMacEntry ::= SEQUENCE {
+    dlswDirMacIndex          INTEGER,
+    dlswDirMacMac            MacAddressNC,
+    dlswDirMacMask           MacAddressNC,
+    dlswDirMacEntryType      INTEGER,
+    dlswDirMacLocationType   INTEGER,
+    dlswDirMacLocation       RowPointer,
+    dlswDirMacStatus         INTEGER,
+    dlswDirMacLFSize         LFSize,
+    dlswDirMacRowStatus      RowStatus
+    }
+
+dlswDirMacIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Uniquely identifies a conceptual row of this table."
+    ::= { dlswDirMacEntry 1 }
+
+dlswDirMacMac  OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The MAC address, together with the dlswDirMacMask,
+        specifies a set of MAC addresses that are defined or
+        discovered through an interface or partner DLSw nodes."
+    ::= { dlswDirMacEntry 2 }
+
+dlswDirMacMask  OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The MAC address mask, together with the dlswDirMacMac,
+        specifies a set of MAC addresses that are defined or
+        discovered through an interface or partner DLSw nodes."
+    DEFVAL { 'FFFFFFFFFFFF'H }
+    ::= { dlswDirMacEntry 3 }
+
+dlswDirMacEntryType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        other                    (1),
+        userConfiguredPublic     (2),
+        userConfiguredPrivate    (3),
+        partnerCapExMsg          (4),
+        dynamic                  (5)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The cause of the creation of this conceptual row.
+        It could be one of the three methods: (1) user
+        configured, including via management protocol
+        set operations, configuration file, command line
+        or equivalent methods; (2) learned from the
+        partner DLSw Capabilities Exchange messages;
+        and (3) dynamic, e.g., learned from ICanReach
+        messages, or LAN explorer frames.  Since only
+        individual MAC addresses can be dynamically learned,
+        dynamic entries will all have a mask of all FFs.
+
+        The public versus private distinction for user-
+        configured resources applies only to local resources
+        (UC remote resources are private), and indicates
+        whether that resource should be advertised in
+        capabilities exchange messages sent by this node."
+    DEFVAL { userConfiguredPublic }
+    ::= { dlswDirMacEntry 4 }
+
+dlswDirMacLocationType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        other                 (1),
+        local                 (2),
+        remote                (3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The location of the resource (or a collection of
+        resources using a mask) of this conceptual row
+
+        is either (1) local - the resource is reachable
+        via an interface, or (2) remote - the resource
+        is reachable via a partner DLSw node (or a set
+        of partner DLSw nodes)."
+    DEFVAL { local }
+    ::= { dlswDirMacEntry 5 }
+
+dlswDirMacLocation  OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "Points to either the ifEntry, dlswTConnConfigEntry,
+        dlswTConnOperEntry, 0.0, or something that is implementation
+        specific.  It identifies the location of the MAC address
+        (or the collection of MAC addresses.)"
+    DEFVAL { null }
+    ::= { dlswDirMacEntry 6 }
+
+dlswDirMacStatus  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        unknown               (1),
+        reachable             (2),
+        notReachable          (3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object specifies whether DLSw currently believes
+        the MAC address to be accessible at the specified location.
+        The value `notReachable' allows a configured resource
+        definition to be taken out of service when a search to
+        that resource fails (avoiding a repeat of the search)."
+    DEFVAL { unknown }
+    ::= { dlswDirMacEntry 7 }
+
+dlswDirMacLFSize  OBJECT-TYPE
+    SYNTAX     LFSize
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The largest size of the MAC INFO field (LLC header and data)
+        that a circuit to the MAC address can carry through this path."
+    DEFVAL { lfs65535 }
+    ::= { dlswDirMacEntry 8 }
+
+dlswDirMacRowStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object is used by the manager to create
+        or delete the row entry in the dlswDirMacTable
+        following the RowStatus textual convention."
+    ::= { dlswDirMacEntry 9 }
+
+-- ...................................................................
+-- Directory for NetBIOS Names
+-- All Possible combinations of values of these objects.
+--
+--     EntryType   LocationType       Location        Status
+--  ============== ============ ================== ==============
+--  userConfigured    local     ifEntry or 0.0     reachable, or
+--                                                 notReachable, or
+--                                                 unknown
+--  userConfigured    remote    TConnConfigEntry   reachable, or
+--                                                 notReachable, or
+--                                                 unknown
+--  partnerCapExMsg   remote    TConnOperEntry     unknown
+--  dynamic           local     ifEntry or 0.0     reachable
+--  dynamic           remote    TConnOperEntry     reachable
+--
+-- ...................................................................
+dlswDirNBTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswDirNBEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table contains locations of NetBIOS names.
+        They could be either verified or not verified,
+        local or remote, and configured locally or learned
+        from either Capabilities Exchange messages or
+        directory searches."
+    ::= { dlswDirCache 2 }
+
+dlswDirNBEntry  OBJECT-TYPE
+    SYNTAX     DlswDirNBEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Indexed by dlswDirNBIndex."
+    INDEX   { dlswDirNBIndex }
+    ::= { dlswDirNBTable 1 }
+
+DlswDirNBEntry ::= SEQUENCE {
+    dlswDirNBIndex           INTEGER,
+    dlswDirNBName            NBName,
+    dlswDirNBNameType        INTEGER,
+    dlswDirNBEntryType       INTEGER,
+    dlswDirNBLocationType    INTEGER,
+    dlswDirNBLocation        RowPointer,
+    dlswDirNBStatus          INTEGER,
+    dlswDirNBLFSize          LFSize,
+    dlswDirNBRowStatus       RowStatus
+    }
+
+dlswDirNBIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Uniquely identifies a conceptual row of this table."
+    ::= { dlswDirNBEntry 1 }
+
+dlswDirNBName  OBJECT-TYPE
+    SYNTAX     NBName
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The NetBIOS name (including `any char' and `wildcard'
+        characters) specifies a set of NetBIOS names that are
+        defined or discovered through an interface or partner
+        DLSw nodes."
+    ::= { dlswDirNBEntry 2 }
+
+dlswDirNBNameType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        unknown       (1),
+        individual    (2),
+        group         (3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "Whether dlswDirNBName represents an (or a set of) individual
+        or group NetBIOS name(s)."
+    DEFVAL { unknown }
+    ::= { dlswDirNBEntry 3 }
+
+dlswDirNBEntryType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        other                    (1),
+        userConfiguredPublic     (2),
+        userConfiguredPrivate    (3),
+        partnerCapExMsg          (4),
+        dynamic                  (5)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The cause of the creation of this conceptual row.
+        It could be one of the three methods: (1) user
+        configured, including via management protocol
+        set operations, configuration file, command line,
+        or equivalent methods; (2) learned from the
+        partner DLSw Capabilities Exchange messages;
+        and (3) dynamic, e.g., learned from ICanReach
+        messages, or test frames.  Since only actual
+        NetBIOS names can be dynamically learned, dynamic
+        entries will not contain any char or wildcard
+        characters.
+
+        The public versus private distinction for user-
+        configured resources applies only to local resources
+        (UC remote resources are private), and indicates
+        whether that resource should be advertised in
+        capabilities exchange messages sent by this node."
+    DEFVAL { userConfiguredPublic }
+    ::= { dlswDirNBEntry 4 }
+
+dlswDirNBLocationType  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        other                 (1),
+        local                 (2),
+        remote                (3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The location of the resource (or a collection of resources
+        using any char/wildcard characters) of this conceptual row
+        is either (1) local - the resource is reachable via an
+        interface, or (2) remote - the resource is reachable via a
+        a partner DLSw node (or a set of partner DLSw nodes)."
+    DEFVAL { local }
+    ::= { dlswDirNBEntry 5 }
+
+dlswDirNBLocation  OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "Points to either the ifEntry, dlswTConnConfigEntry,
+        dlswTConnOperEntry, 0.0, or something that is implementation
+        specific.  It identifies the location of the NetBIOS name
+        or the set of NetBIOS names."
+    DEFVAL { null }
+    ::= { dlswDirNBEntry 6 }
+
+dlswDirNBStatus  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        unknown               (1),
+        reachable             (2),
+        notReachable          (3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object specifies whether DLSw currently believes
+        the NetBIOS name to be accessible at the specified location.
+        The value `notReachable' allows a configured resource
+        definition to be taken out of service when a search to
+        that resource fails (avoiding a repeat of the search)."
+    DEFVAL { unknown }
+    ::= { dlswDirNBEntry 7 }
+
+dlswDirNBLFSize  OBJECT-TYPE
+    SYNTAX     LFSize
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The largest size of the MAC INFO field (LLC header and data)
+        that a circuit to the NB name can carry through this path."
+    DEFVAL { lfs65535 }
+    ::= { dlswDirNBEntry 8 }
+
+dlswDirNBRowStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object is used by manager to create
+        or delete the row entry in the dlswDirNBTable
+        following the RowStatus textual convention."
+    ::= { dlswDirNBEntry 9 }
+
+-- ===================================================================
+-- Resource Locations
+-- ===================================================================
+
+dlswDirLocate       OBJECT IDENTIFIER ::= { dlswDirectory 3 }
+
+-- ...................................................................
+-- Locate Entries in the dlswDirMacTable for a given MAC address
+-- ...................................................................
+dlswDirLocateMacTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswDirLocateMacEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table is used to retrieve all entries in the
+        dlswDirMacTable that match a given MAC address,
+        in the order of the best matched first, the
+        second best matched second, and so on, till
+        no more entries match the given MAC address."
+    ::= { dlswDirLocate 1 }
+
+dlswDirLocateMacEntry  OBJECT-TYPE
+    SYNTAX     DlswDirLocateMacEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Indexed by dlswDirLocateMacMac and dlswDirLocateMacMatch.
+        The first object is the MAC address of interest, and
+        the second object is the order in the list of all
+        entries that match the MAC address."
+    INDEX   { dlswDirLocateMacMac, dlswDirLocateMacMatch }
+    ::= { dlswDirLocateMacTable 1 }
+
+DlswDirLocateMacEntry ::= SEQUENCE {
+    dlswDirLocateMacMac            MacAddressNC,
+    dlswDirLocateMacMatch          INTEGER,
+    dlswDirLocateMacLocation       RowPointer
+    }
+
+dlswDirLocateMacMac  OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The MAC address to be located."
+    ::= { dlswDirLocateMacEntry 1 }
+
+dlswDirLocateMacMatch  OBJECT-TYPE
+    SYNTAX     INTEGER (1..255)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The order of the entries of dlswDirMacTable
+        that match dlswDirLocateMacMac.  A value of
+        one represents the entry that best matches the
+        MAC address.  A value of two represents the second
+        best matched entry, and so on."
+    ::= { dlswDirLocateMacEntry 2 }
+
+dlswDirLocateMacLocation  OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "Points to the dlswDirMacEntry."
+    ::= { dlswDirLocateMacEntry 3 }
+
+-- ...................................................................
+-- Locate Entries in the dlswDirNBTable for a given NetBIOS name
+-- ...................................................................
+dlswDirLocateNBTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswDirLocateNBEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table is used to retrieve all entries in the
+        dlswDirNBTable that match a given NetBIOS name,
+        in the order of the best matched first, the
+        second best matched second, and so on, till
+        no more entries match the given NetBIOS name."
+    ::= { dlswDirLocate 2 }
+
+dlswDirLocateNBEntry  OBJECT-TYPE
+    SYNTAX     DlswDirLocateNBEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "Indexed by dlswDirLocateNBName and dlswDirLocateNBMatch.
+        The first object is the NetBIOS name of interest, and
+        the second object is the order in the list of all
+        entries that match the NetBIOS name."
+    INDEX   { dlswDirLocateNBName, dlswDirLocateNBMatch }
+    ::= { dlswDirLocateNBTable 1 }
+
+DlswDirLocateNBEntry ::= SEQUENCE {
+    dlswDirLocateNBName           NBName,
+    dlswDirLocateNBMatch          INTEGER,
+    dlswDirLocateNBLocation       RowPointer
+    }
+
+dlswDirLocateNBName  OBJECT-TYPE
+    SYNTAX     NBName
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The NetBIOS name to be located (no any char or wildcards)."
+    ::= { dlswDirLocateNBEntry 1 }
+
+dlswDirLocateNBMatch  OBJECT-TYPE
+    SYNTAX     INTEGER (1..255)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The order of the entries of dlswDirNBTable
+        that match dlswDirLocateNBName.  A value of
+        one represents the entry that best matches the
+        NetBIOS name.  A value of two represents the second
+        best matched entry, and so on."
+    ::= { dlswDirLocateNBEntry 2 }
+
+dlswDirLocateNBLocation  OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "Points to the dlswDirNBEntry."
+    ::= { dlswDirLocateNBEntry 3 }
+
+-- *******************************************************************
+-- CIRCUIT
+-- A circuit is the end-to-end association of two DLSw entities
+-- through one or two DLSw nodes.  It is the concatenation of
+-- two "data links", optionally with an intervening transport
+-- connection. The origin of the circuit is the end station that
+-- initiates the circuit.  The target of the circuit is the end
+-- station that receives the initiation.
+-- *******************************************************************
+
+-- ===================================================================
+-- Statistics Related to Circuits
+-- ===================================================================
+dlswCircuitStat      OBJECT IDENTIFIER ::= { dlswCircuit 1 }
+
+dlswCircuitStatActives  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The current number of circuits in dlswCircuitTable that are
+        not in the disconnected state."
+    ::= { dlswCircuitStat 1 }
+
+dlswCircuitStatCreates  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of entries ever added to dlswCircuitTable,
+        or reactivated upon exiting `disconnected' state."
+    ::= { dlswCircuitStat 2 }
+
+-- ===================================================================
+-- Circuit Table
+--
+-- This table is the DLSw entity's view of circuits.  There will be
+-- a conceptual row in the table associated with each data link.
+--
+-- The chart below lists the various possible combinations of
+-- origin and target MAC locations and the number of entries in
+-- this Circuit Table:
+--
+--           number of       |    Origin End Station Location
+--         entries in the    |======================================
+--         Circuit Table     |  internal     local       remote
+--    =======================|======================================
+--     Target    |  internal |     NA          2           1
+--     End       |  local    |     2           2           1
+--     Station   |  remote   |     1           1           NA
+--     Location  |           |
+--
+--     NA: Not applicable
+--
+--  Note:
+--  (a) IfIndex and RouteInfo are applied only if location is local.
+--  (b) TDomain and TAddr are applied only if location is remote.
+--
+-- Most of statistics related to circuits can be collected
+-- from LLC-2 Link Station Table.
+-- ===================================================================
+dlswCircuitTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswCircuitEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "This table is the circuit representation in the DLSw
+        entity. Virtual data links are used to represent any internal
+        end stations.  There is a conceptual row associated with
+        each data link.  Thus, for circuits without an intervening
+        transport connection, there are two conceptual rows
+        for each circuit.
+
+        The table consists of the circuits being established,
+        established, and as an implementation option, circuits that
+        have been disconnected.  For circuits carried over
+        transport connections, an entry is created after
+        the CUR_cs was sent or received.  For circuits between
+        two locally attached devices, or internal virtual MAC
+        addresses, an entry is created when the equivalent of
+        CUR_cs sent/received status is reached.
+
+        End station 1 (S1) and End station 2 (S2) are used to
+        represent the two end stations of the circuit.
+        S1 is always an end station which is locally attached.
+        S2 may be locally attached or remote.  If it is locally
+        attached, the circuit will be represented by two rows indexed
+        by (A, B) and (B, A) where A & B are the relevant MACs/SAPs.
+
+        The table may be used to store the causes of disconnection of
+        circuits.  It is recommended that the oldest disconnected
+        circuit entry be removed from this table when the memory
+        space of disconnected circuits is needed."
+    ::= { dlswCircuit 2 }
+
+dlswCircuitEntry  OBJECT-TYPE
+    SYNTAX     DlswCircuitEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       ""
+    INDEX   { dlswCircuitS1Mac,
+              dlswCircuitS1Sap,
+              dlswCircuitS2Mac,
+              dlswCircuitS2Sap }
+    ::= { dlswCircuitTable 1 }
+
+DlswCircuitEntry ::= SEQUENCE {
+    dlswCircuitS1Mac                MacAddressNC,
+    dlswCircuitS1Sap                OCTET STRING,
+    dlswCircuitS1IfIndex            INTEGER,
+    dlswCircuitS1DlcType            DlcType,
+    dlswCircuitS1RouteInfo          OCTET STRING,
+    dlswCircuitS1CircuitId          OCTET STRING,
+    dlswCircuitS1Dlc                RowPointer,
+    dlswCircuitS2Mac                MacAddressNC,
+    dlswCircuitS2Sap                OCTET STRING,
+    dlswCircuitS2Location           EndStationLocation,
+    dlswCircuitS2TDomain            OBJECT IDENTIFIER,
+    dlswCircuitS2TAddress           TAddress,
+    dlswCircuitS2CircuitId          OCTET STRING,
+    dlswCircuitOrigin               INTEGER,
+    dlswCircuitEntryTime            TimeTicks,
+    dlswCircuitStateTime            TimeTicks,
+    dlswCircuitState                INTEGER,
+    dlswCircuitPriority             INTEGER,
+    dlswCircuitFCSendGrantedUnits   INTEGER,
+    dlswCircuitFCSendCurrentWndw    INTEGER,
+    dlswCircuitFCRecvGrantedUnits   INTEGER,
+    dlswCircuitFCRecvCurrentWndw    INTEGER,
+    dlswCircuitFCLargestRecvGranted Gauge32,
+    dlswCircuitFCLargestSendGranted Gauge32,
+    dlswCircuitFCHalveWndwSents     Counter32,
+    dlswCircuitFCResetOpSents       Counter32,
+    dlswCircuitFCHalveWndwRcvds     Counter32,
+    dlswCircuitFCResetOpRcvds       Counter32,
+    dlswCircuitDiscReasonLocal      INTEGER,
+    dlswCircuitDiscReasonRemote     INTEGER,
+    dlswCircuitDiscReasonRemoteData OCTET STRING
+    }
+
+-- ...................................................................
+-- Information related to the End Station 1 (S1).
+-- ...................................................................
+dlswCircuitS1Mac  OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The MAC Address of End Station 1 (S1) used for this circuit."
+    ::= { dlswCircuitEntry 1 }
+
+dlswCircuitS1Sap  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(1))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The SAP at End Station 1 (S1) used for this circuit."
+    ::= { dlswCircuitEntry 2 }
+
+dlswCircuitS1IfIndex  OBJECT-TYPE
+    SYNTAX     INTEGER (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The ifEntry index of the local interface through which S1
+        can be reached."
+    ::= { dlswCircuitEntry 3 }
+
+dlswCircuitS1DlcType  OBJECT-TYPE
+    SYNTAX     DlcType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The DLC protocol in use between the DLSw node and S1."
+    ::= { dlswCircuitEntry 4 }
+
+dlswCircuitS1RouteInfo  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0..30))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "If source-route bridging is in use between the DLSw
+        node and S1, this is the routing information field
+        describing the path between the two devices.
+        Otherwise the value will be an OCTET STRING of
+        zero length."
+    ::= { dlswCircuitEntry 5 }
+
+dlswCircuitS1CircuitId  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 8))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The Circuit ID assigned by this DLSw node to this circuit.
+        The first four octets are the DLC port Id, and
+        the second four octets are the Data Link Correlator.
+        If the DLSw SSP was not used to establish this circuit,
+        the value will be a string of zero length."
+    ::= { dlswCircuitEntry 6 }
+
+dlswCircuitS1Dlc  OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "Points to a conceptual row of the underlying DLC MIB,
+        which could either be the standard MIBs (e.g., the SDLC),
+        or an enterprise-specific DLC MIB."
+    ::= { dlswCircuitEntry 7 }
+
+-- ...................................................................
+-- Information related to the End Station 2 (S2).
+-- ...................................................................
+dlswCircuitS2Mac  OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The MAC Address of End Station 2 (S2) used for this circuit."
+    ::= { dlswCircuitEntry 8 }
+
+dlswCircuitS2Sap  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(1))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The SAP at End Station 2 (S2) used for this circuit."
+    ::= { dlswCircuitEntry 9 }
+
+dlswCircuitS2Location  OBJECT-TYPE
+    SYNTAX     EndStationLocation
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The location of End Station 2 (S2).
+        If the location of End Station 2 is local, the
+        interface information will be available in the
+        conceptual row whose S1 and S2 are the S2 and
+        the S1 of this conceptual row, respectively."
+    ::= { dlswCircuitEntry 10 }
+
+dlswCircuitS2TDomain  OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "If the location of End Station 2 is remote,
+        this value is the transport domain of the
+        transport protocol the circuit is running
+        over.  Otherwise, the value is 0.0."
+    ::= { dlswCircuitEntry 11 }
+
+dlswCircuitS2TAddress  OBJECT-TYPE
+    SYNTAX     TAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "If the location of End Station 2 is remote,
+        this object contains the address of the partner
+        DLSw, else it will be an OCTET STRING of zero length."
+    ::= { dlswCircuitEntry 12 }
+
+dlswCircuitS2CircuitId  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 8))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The Circuit ID assigned to this circuit by the partner
+        DLSw node.  The first four octets are the DLC port Id, and
+        the second four octets are the Data Link Correlator.
+        If the DLSw SSP was not used to establish this circuit,
+        the value will be a string of zero length."
+    ::= { dlswCircuitEntry 13 }
+
+-- ...................................................................
+dlswCircuitOrigin  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        s1             (1),
+        s2             (2)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This object specifies which of the two end stations
+        initiated the establishment of this circuit."
+    ::= { dlswCircuitEntry 14 }
+
+-- ...................................................................
+-- Operational information related to this circuit.
+-- ...................................................................
+dlswCircuitEntryTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The amount of time (in hundredths of a second) since this
+        circuit table conceptual row was created."
+    ::= { dlswCircuitEntry 15 }
+
+dlswCircuitStateTime  OBJECT-TYPE
+    SYNTAX     TimeTicks
+    UNITS      "hundredths of a second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The amount of time (in hundredths of a second) since this
+        circuit entered the current state."
+    ::= { dlswCircuitEntry 16 }
+
+dlswCircuitState  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        disconnected           (1),
+        circuitStart           (2),
+        resolvePending         (3),
+        circuitPending         (4),
+        circuitEstablished     (5),
+        connectPending         (6),
+        contactPending         (7),
+        connected              (8),
+        disconnectPending      (9),
+        haltPending            (10),
+        haltPendingNoack       (11),
+        circuitRestart         (12),
+        restartPending         (13)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "The current state of this circuit.  The agent, implementation
+        specific, may choose to keep entries for some period of time
+        after circuit disconnect, so the manager can gather the time
+        and cause of disconnection.
+
+        While all of the specified values may be returned from a GET
+        operation, the only SETable value is `disconnectPending'.
+        When this value is set, DLSw should perform the appropriate
+        action given its previous state (e.g., send HALT_DL if the
+        state was `connected') to bring the circuit down to the
+        `disconnected' state.  Both the partner DLSw and local end
+        station(s) should be notified as appropriate.
+
+        This MIB provides no facility to re-establish a disconnected
+        circuit, because in DLSw this should be an end station-driven
+        function."
+    ::= { dlswCircuitEntry 17 }
+
+dlswCircuitPriority  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        unsupported     (1),
+        low             (2),
+        medium          (3),
+        high            (4),
+        highest         (5)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The transmission priority of this circuit as understood by
+        this DLSw node.  This value is determined by the two DLSw
+        nodes at circuit startup time.  If this DLSw node does not
+        support DLSw circuit priority, the value `unsupported' should
+        be returned."
+    ::= { dlswCircuitEntry 18 }
+
+-- ...................................................................
+-- Pacing Objects:
+-- These objects are applicable if DLSw is using the SSP circuit
+-- pacing protocol to control the flow between the two data links
+-- in this circuit.
+-- ...................................................................
+dlswCircuitFCSendGrantedUnits  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of paced SSP messages that this DLSw is currently
+        authorized to send on this circuit before it must stop and
+        wait for an additional flow control indication from the
+        partner DLSw.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 19 }
+
+dlswCircuitFCSendCurrentWndw  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The current window size that this DLSw is using in its role
+        as a data sender.  This is the value by which this DLSw would
+        increase the number of messages it is authorized to send, if
+        it were to receive a flow control indication with the bits
+        specifying `repeat window'.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 20 }
+
+dlswCircuitFCRecvGrantedUnits  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The current number of paced SSP messages that this DLSw has
+        authorized the partner DLSw to send on this circuit before
+        the partner DLSw must stop and wait for an additional flow
+        control indication from this DLSw.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 21 }
+
+dlswCircuitFCRecvCurrentWndw  OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The current window size that this DLSw is using in its role
+        as a data receiver.  This is the number of additional paced
+        SSP messages that this DLSw would be authorizing its DLSw
+        partner to send, if this DLSw were to send a flow control
+        indication with the bits specifying `repeat window'.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 22 }
+
+dlswCircuitFCLargestRecvGranted  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The largest receive window size granted by this DLSw during
+        the current activation of this circuit.  This is not the
+        largest number of messages granted at any time, but the
+        largest window size as represented by FCIND operator bits.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 23 }
+
+dlswCircuitFCLargestSendGranted  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The largest send (with respect to this DLSw) window size
+        granted by the partner DLSw during the current activation of
+        this circuit.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 24 }
+
+dlswCircuitFCHalveWndwSents  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Halve Window operations this DLSw has sent on
+        this circuit, in its role as a data receiver.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 25 }
+
+dlswCircuitFCResetOpSents  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Reset Window operations this DLSw has sent on
+        this circuit, in its role as a data receiver.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 26 }
+
+dlswCircuitFCHalveWndwRcvds  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Halve Window operations this DLSw has received on
+        this circuit, in its role as a data sender.
+
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 27 }
+
+dlswCircuitFCResetOpRcvds  OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of Reset Window operations this DLSw has received on
+        this circuit, in its role as a data sender.
+        The value zero should be returned if this circuit is not
+        running the DLSw pacing protocol."
+    ::= { dlswCircuitEntry 28 }
+
+-- ...................................................................
+-- Information about the circuit disconnection
+-- ...................................................................
+dlswCircuitDiscReasonLocal  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        endStationDiscRcvd           (1),
+        endStationDlcError           (2),
+        protocolError                (3),
+        operatorCommand              (4),
+        haltDlRcvd                   (5),
+        haltDlNoAckRcvd              (6),
+        transportConnClosed          (7)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The reason why this circuit was last disconnected, as seen
+        by this DLSw node.
+
+        This object is present only if the agent keeps circuit
+        table entries around for some period after circuit disconnect."
+    ::= { dlswCircuitEntry 29 }
+
+dlswCircuitDiscReasonRemote  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        unknown                      (1),
+        endStationDiscRcvd           (2),
+        endStationDlcError           (3),
+        protocolError                (4),
+        operatorCommand              (5)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The generic reason code why this circuit was last
+        disconnected, as reported by the DLSw partner in a HALT_DL
+
+        or HALT_DL_NOACK.  If the partner does not send a reason
+        code in these messages, or the DLSw implementation does
+        not report receiving one, the value `unknown' is returned.
+
+        This object is present only if the agent keeps circuit table
+        entries around for some period after circuit disconnect."
+    ::= { dlswCircuitEntry 30 }
+
+dlswCircuitDiscReasonRemoteData  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 4))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "Implementation-specific data reported by the DLSw partner in
+        a HALT_DL or HALT_DL_NOACK, to help specify how and why this
+        circuit was last disconnected.  If the partner does not send
+        this data in these messages, or the DLSw implementation does
+        not report receiving it, a string of zero length is returned.
+
+        This object is present only if the agent keeps circuit table
+        entries around for some period after circuit disconnect."
+    ::= { dlswCircuitEntry 31 }
+
+-- ...................................................................
+-- Statistics related to this circuit.
+-- All statistics are in LLC-2 Link Station Statistical Table.
+-- All SDLC statistics are in SDLC MIB
+-- ...................................................................
+
+-- *******************************************************************
+-- DLSW SDLC EXTENSION
+-- *******************************************************************
+dlswSdlcLsEntries  OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The number of entries in dlswSdlcLsTable."
+    ::= { dlswSdlc 1 }
+
+-- ...................................................................
+dlswSdlcLsTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DlswSdlcLsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The table defines the virtual MAC addresses for those
+        SDLC link stations that participate in data link switching."
+    ::= { dlswSdlc 2 }
+
+dlswSdlcLsEntry  OBJECT-TYPE
+    SYNTAX     DlswSdlcLsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+       "The index of this table is the ifIndex value for the
+        SDLC port which owns this link station and the poll
+        address of the particular SDLC link station."
+    INDEX  { ifIndex, sdlcLSAddress }
+    ::= { dlswSdlcLsTable 1 }
+
+DlswSdlcLsEntry ::= SEQUENCE {
+    dlswSdlcLsLocalMac           MacAddressNC,
+    dlswSdlcLsLocalSap           OCTET STRING,
+    dlswSdlcLsLocalIdBlock       DisplayString,
+    dlswSdlcLsLocalIdNum         DisplayString,
+    dlswSdlcLsRemoteMac          MacAddressNC,
+    dlswSdlcLsRemoteSap          OCTET STRING,
+    dlswSdlcLsRowStatus          RowStatus
+    }
+
+dlswSdlcLsLocalMac    OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The virtual MAC address used to represent the SDLC-attached
+        link station to the rest of the DLSw network."
+    ::= { dlswSdlcLsEntry 1 }
+
+dlswSdlcLsLocalSap    OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(1))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The SAP used to represent this link station."
+    ::= { dlswSdlcLsEntry 2 }
+
+dlswSdlcLsLocalIdBlock OBJECT-TYPE
+    SYNTAX     DisplayString  (SIZE (0 | 3))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The block number is the first three digits of the node_id,
+        if available.  These 3 hexadecimal digits identify the
+        product."
+    DEFVAL { ''H }
+    ::= { dlswSdlcLsEntry 3 }
+
+dlswSdlcLsLocalIdNum OBJECT-TYPE
+    SYNTAX     DisplayString  (SIZE (0 | 5))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The ID number is the last 5 digits of the node_id, if
+        available.  These 5 hexadecimal digits are
+        administratively defined and combined with the 3 digit
+        block number form the node_id.  This node_id is used to
+        identify the local node and is included in SNA XIDs."
+    DEFVAL { ''H }
+    ::= { dlswSdlcLsEntry 4 }
+
+dlswSdlcLsRemoteMac    OBJECT-TYPE
+    SYNTAX     MacAddressNC
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The MAC address to which DLSw should attempt to connect
+        this link station. If this information is not available,
+        a length of zero for this object should be returned."
+    DEFVAL { ''H }
+    ::= { dlswSdlcLsEntry 5 }
+
+dlswSdlcLsRemoteSap    OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 1))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "The SAP of the remote station to which this link
+        station should be connected.  If this information
+        is not available, a length of zero for this object
+        should be returned."
+    DEFVAL { ''H }
+    ::= { dlswSdlcLsEntry 6 }
+
+dlswSdlcLsRowStatus    OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+       "This object is used by the manager to create
+        or delete the row entry in the dlswSdlcLsTable
+
+        following the RowStatus textual convention."
+    ::= { dlswSdlcLsEntry 7 }
+
+-- *******************************************************************
+-- TRAP GENERATION CONTROL
+-- *******************************************************************
+dlswTrapControl OBJECT IDENTIFIER  ::= { dlswNode 10}
+
+dlswTrapCntlTConnPartnerReject  OBJECT-TYPE
+    SYNTAX     INTEGER  {
+        enabled     (1),
+        disabled    (2),
+        partial     (3)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "Indicates whether the DLSw is permitted to emit partner
+        reject related traps.  With the value of `enabled'
+        the DLSw will emit all partner reject related traps.
+        With the value of `disabled' the DLSw will not emit
+        any partner reject related traps.  With the value
+        of `partial' the DLSw will only emits partner reject
+        traps for CapEx reject.  The changes take effect
+        immediately."
+    ::= { dlswTrapControl 1 }
+
+dlswTrapCntlTConnProtViolation  OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "Indicates whether the DLSw is permitted to generate
+        protocol-violation traps on the events such as
+        window size violation.  The changes take effect
+        immediately."
+    ::= { dlswTrapControl 2 }
+
+dlswTrapCntlTConn  OBJECT-TYPE
+    SYNTAX     INTEGER {
+        enabled     (1),
+        disabled    (2),
+        partial     (3)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "Indicates whether the DLSw is permitted to emit transport
+        connection up and down traps.  With the value of `enabled'
+        the DLSw will emit traps when connections enter `connected'
+        and `disconnected' states.  With the value of `disabled'
+        the DLSw will not emit traps when connections enter of
+        `connected' and `disconnected' states.  With the value
+        of `partial' the DLSw will only emits transport connection
+        down traps when the connection is closed with busy.
+        The changes take effect immediately."
+    ::= { dlswTrapControl 3 }
+
+dlswTrapCntlCircuit  OBJECT-TYPE
+    SYNTAX     INTEGER {
+        enabled     (1),
+        disabled    (2),
+        partial     (3)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+       "Indicates whether the DLSw is permitted to generate
+        circuit up and down traps.  With the value of `enabled'
+        the DLSw will emit traps when circuits enter `connected'
+        and `disconnected' states.  With the value of `disabled'
+        the DLSw will not emit traps when circuits enter of
+        `connected' and `disconnected' states.  With the value
+        of `partial' the DLSw will emit traps only for those
+        circuits that are initiated by this DLSw, e.g.,
+        originating the CUR_CS message.  The changes take effect
+        immediately."
+    ::= { dlswTrapControl 4 }
+
+-- *******************************************************************
+-- NOTIFICATIONS, i.e., TRAP DEFINITIONS
+-- *******************************************************************
+dlswTraps              OBJECT IDENTIFIER ::= { dlswMIB 0 }
+
+-- ===================================================================
+-- This section defines the well-known notifications sent by
+-- DLSW agents.
+-- Care must be taken to insure that no particular notification
+-- is sent to a single receiving entity more often than once
+-- every five seconds.
+--
+-- Traps includes:
+-- (1) Partner rejected (capEx rejection, not in partner list, etc.)
+-- (2) DLSw protocol violation (e.g., window size violation, etc.)
+-- (3) Transport connection up/down
+
+-- (4) Circuit up/down
+-- ===================================================================
+--
+
+dlswTrapTConnPartnerReject NOTIFICATION-TYPE
+    OBJECTS { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr
+    }
+    STATUS     current
+    DESCRIPTION
+       "This trap is sent each time a transport connection
+        is rejected by a partner DLSw during Capabilities
+        Exchanges.  The emission of this trap is controlled
+        by dlswTrapCntlTConnPartnerReject."
+    ::= { dlswTraps 1 }
+
+dlswTrapTConnProtViolation NOTIFICATION-TYPE
+    OBJECTS { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr
+    }
+    STATUS     current
+    DESCRIPTION
+       "This trap is sent each time a protocol violation is
+        detected for a transport connection.  The emission of this
+        trap is controlled by dlswTrapCntlTConnProtViolation."
+    ::= { dlswTraps 2 }
+
+dlswTrapTConnUp NOTIFICATION-TYPE
+    OBJECTS { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr
+    }
+    STATUS     current
+    DESCRIPTION
+       "This trap is sent each time a transport connection
+        enters `connected' state.  The emission of this trap
+        is controlled by dlswTrapCntlTConn."
+    ::= { dlswTraps 3 }
+
+dlswTrapTConnDown NOTIFICATION-TYPE
+    OBJECTS { dlswTConnOperTDomain, dlswTConnOperRemoteTAddr
+    }
+    STATUS     current
+    DESCRIPTION
+       "This trap is sent each time a transport connection
+        enters `disconnected' state.  The emission of this trap
+        is controlled by dlswTrapCntlTConn."
+    ::= { dlswTraps 4 }
+
+dlswTrapCircuitUp NOTIFICATION-TYPE
+    OBJECTS { dlswCircuitS1Mac, dlswCircuitS1Sap,
+              dlswCircuitS2Mac, dlswCircuitS2Sap
+
+    }
+    STATUS     current
+    DESCRIPTION
+       "This trap is sent each time a circuit enters `connected'
+        state.  The emission of this trap is controlled by
+        dlswTrapCntlCircuit."
+    ::= { dlswTraps 5 }
+
+dlswTrapCircuitDown NOTIFICATION-TYPE
+    OBJECTS { dlswCircuitS1Mac, dlswCircuitS1Sap,
+              dlswCircuitS2Mac, dlswCircuitS2Sap
+    }
+    STATUS     current
+    DESCRIPTION
+       "This trap is sent each time a circuit enters `disconnected'
+        state.  The emission of this trap is controlled by
+        dlswTrapCntlCircuit."
+    ::= { dlswTraps 6 }
+
+-- *******************************************************************
+-- CONFORMANCE INFORMATION
+-- *******************************************************************
+dlswConformance        OBJECT IDENTIFIER ::= { dlsw 3 }
+
+dlswCompliances        OBJECT IDENTIFIER ::= { dlswConformance 1 }
+dlswGroups             OBJECT IDENTIFIER ::= { dlswConformance 2 }
+
+-- ===================================================================
+-- COMPLIANCE STATEMENTS
+-- ===================================================================
+
+-- ...................................................................
+-- Core compliance for all DLSw entities
+-- ...................................................................
+dlswCoreCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "The core compliance statement for all DLSw nodes."
+    MODULE
+        MANDATORY-GROUPS  {
+                dlswNodeGroup,
+                dlswTConnStatGroup,
+                dlswTConnConfigGroup,
+                dlswTConnOperGroup,
+                dlswInterfaceGroup,
+                dlswCircuitGroup,
+                dlswCircuitStatGroup,
+                dlswNotificationGroup }
+
+        GROUP dlswNodeNBGroup
+            DESCRIPTION
+               "The DLSw NetBIOS Node group is mandatory only for
+                those DLSw entities that implement NetBIOS."
+
+        GROUP dlswTConnNBGroup
+            DESCRIPTION
+               "The DLSw NetBIOS Transport Connection group is
+                mandatory only for those DLSw entities that
+                implement NetBIOS."
+
+        OBJECT  dlswNodeStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswNodeVirtualSegmentLFSize
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswNodeResourceNBExclusivity
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswNodeResourceMacExclusivity
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTrapCntlTConnPartnerReject
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTrapCntlTConnProtViolation
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTrapCntlTConn
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTrapCntlCircuit
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigTDomain
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigLocalTAddr
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigRemoteTAddr
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigEntryType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigGroupDefinition
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigSetupType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigSapList
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigAdvertiseMacNB
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigInitCirRecvWndw
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnConfigRowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnOperState
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswIfRowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswIfVirtualSegment
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswIfSapList
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswCircuitState
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+    ::= { dlswCompliances 1 }
+
+-- ...................................................................
+-- Compliance for all DLSw entities that provide TCP transport.
+-- ...................................................................
+dlswTConnTcpCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "Compliance for DLSw nodes that use TCP as a
+        transport connection protocol."
+    MODULE
+        MANDATORY-GROUPS  {
+                dlswTConnTcpConfigGroup,
+                dlswTConnTcpOperGroup }
+
+        OBJECT  dlswTConnTcpConfigKeepAliveInt
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnTcpConfigTcpConnections
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswTConnTcpConfigMaxSegmentSize
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+    ::= { dlswCompliances 2 }
+
+-- ...................................................................
+-- Compliance for all DLSw Entities that implement a directory
+-- ...................................................................
+dlswDirCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "Compliance for DLSw nodes that provide a directory
+        function."
+    MODULE
+        MANDATORY-GROUPS  {
+                dlswDirGroup }
+
+        GROUP dlswDirNBGroup
+            DESCRIPTION
+               "The DLSw NetBIOS group is mandatory only for
+                those DLSw entities that implement NetBIOS."
+
+        OBJECT  dlswDirMacMac
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacMask
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacEntryType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacLocationType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacLocation
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacLFSize
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirMacRowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBName
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBNameType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBEntryType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBLocationType
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBLocation
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBLFSize
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+
+        OBJECT  dlswDirNBRowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required."
+    ::= { dlswCompliances 3 }
+
+-- ...................................................................
+-- Compliance for all DLSw entities that provide an ordered
+-- list of directory entries that match a resource
+-- ...................................................................
+dlswDirLocateCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "Compliance for DLSw nodes that provide an ordered
+        list of directory entries for a given resource."
+    MODULE
+        MANDATORY-GROUPS  {
+                dlswDirLocateGroup }
+
+        GROUP dlswDirLocateNBGroup
+            DESCRIPTION
+               "The DLSw NetBIOS group is mandatory only for
+                those DLSw entities that implement NetBIOS."
+    ::= { dlswCompliances 4 }
+
+-- ...................................................................
+-- Compliance for all DLSw entities that support SDLC end stations
+-- ...................................................................
+dlswSdlcCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+       "Compliance for DLSw nodes that support SDLC."
+    MODULE
+        MANDATORY-GROUPS  {
+
+                dlswSdlcGroup }
+
+        OBJECT  dlswSdlcLsLocalMac
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+
+        OBJECT  dlswSdlcLsLocalSap
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+
+        OBJECT  dlswSdlcLsLocalIdBlock
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+
+        OBJECT  dlswSdlcLsLocalIdNum
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+
+        OBJECT  dlswSdlcLsRemoteMac
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+
+        OBJECT  dlswSdlcLsRemoteSap
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+
+        OBJECT  dlswSdlcLsRowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Write access is not required."
+    ::= { dlswCompliances 5 }
+
+-- ===================================================================
+-- CONFORMANCE GROUPS
+-- ===================================================================
+
+-- ...................................................................
+-- Node Conformance Group
+-- ...................................................................
+dlswNodeGroup  OBJECT-GROUP
+    OBJECTS  {
+
+        dlswNodeVersion,
+        dlswNodeVendorID,
+        dlswNodeVersionString,
+        dlswNodeStdPacingSupport,
+        dlswNodeStatus,
+        dlswNodeUpTime,
+        dlswNodeVirtualSegmentLFSize,
+        dlswNodeResourceMacExclusivity,
+        dlswTrapCntlTConnPartnerReject,
+        dlswTrapCntlTConnProtViolation,
+        dlswTrapCntlTConn,
+        dlswTrapCntlCircuit
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw node general information."
+    ::= { dlswGroups 1 }
+
+-- ...................................................................
+dlswNodeNBGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswNodeResourceNBExclusivity
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw node general information
+        specifically for nodes that support NetBIOS."
+    ::= { dlswGroups 2 }
+
+-- ...................................................................
+dlswTConnStatGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswTConnStatActiveConnections,
+        dlswTConnStatCloseIdles,
+        dlswTConnStatCloseBusys
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for statistics for transport
+        connections."
+    ::= { dlswGroups 3 }
+
+-- ...................................................................
+dlswTConnConfigGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswTConnConfigTDomain,
+        dlswTConnConfigLocalTAddr,
+        dlswTConnConfigRemoteTAddr,
+        dlswTConnConfigLastModifyTime,
+        dlswTConnConfigEntryType,
+        dlswTConnConfigGroupDefinition,
+        dlswTConnConfigSetupType,
+        dlswTConnConfigSapList,
+        dlswTConnConfigAdvertiseMacNB,
+        dlswTConnConfigInitCirRecvWndw,
+        dlswTConnConfigOpens,
+        dlswTConnConfigRowStatus
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for the configuration of
+        transport connections."
+    ::= { dlswGroups 4 }
+
+-- ...................................................................
+dlswTConnOperGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswTConnOperLocalTAddr,
+        dlswTConnOperEntryTime,
+        dlswTConnOperConnectTime,
+        dlswTConnOperState,
+        dlswTConnOperConfigIndex,
+        dlswTConnOperFlowCntlMode,
+        dlswTConnOperPartnerVersion,
+        dlswTConnOperPartnerVendorID,
+        dlswTConnOperPartnerVersionStr,
+        dlswTConnOperPartnerInitPacingWndw,
+        dlswTConnOperPartnerSapList,
+        dlswTConnOperPartnerMacExcl,
+        dlswTConnOperPartnerMacInfo,
+        dlswTConnOperDiscTime,
+        dlswTConnOperDiscReason,
+        dlswTConnOperDiscActiveCir,
+        dlswTConnOperInDataPkts,
+        dlswTConnOperOutDataPkts,
+        dlswTConnOperInDataOctets,
+        dlswTConnOperOutDataOctets,
+        dlswTConnOperInCntlPkts,
+        dlswTConnOperOutCntlPkts,
+        dlswTConnOperCURexSents,
+        dlswTConnOperICRexRcvds,
+        dlswTConnOperCURexRcvds,
+        dlswTConnOperICRexSents,
+        dlswTConnOperCirCreates,
+        dlswTConnOperCircuits
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for operation information for
+        transport connections."
+    ::= { dlswGroups 5 }
+-- ...................................................................
+dlswTConnNBGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswTConnOperPartnerNBExcl,
+        dlswTConnOperPartnerNBInfo,
+        dlswTConnOperNQexSents,
+        dlswTConnOperNRexRcvds,
+        dlswTConnOperNQexRcvds,
+        dlswTConnOperNRexSents
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for operation information for
+        transport connections, specifically for nodes
+        that support NetBIOS."
+    ::= { dlswGroups 6 }
+
+-- ...................................................................
+dlswTConnTcpConfigGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswTConnTcpConfigKeepAliveInt,
+        dlswTConnTcpConfigTcpConnections,
+        dlswTConnTcpConfigMaxSegmentSize
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for configuration information for
+        transport connections using TCP."
+    ::= { dlswGroups 7 }
+
+-- ...................................................................
+dlswTConnTcpOperGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswTConnTcpOperKeepAliveInt,
+        dlswTConnTcpOperPrefTcpConnections,
+        dlswTConnTcpOperTcpConnections
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for operation information for
+        transport connections using TCP."
+    ::= { dlswGroups 8 }
+
+-- ...................................................................
+dlswInterfaceGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswIfRowStatus,
+        dlswIfVirtualSegment,
+        dlswIfSapList
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw interfaces."
+    ::= { dlswGroups 9 }
+
+-- ...................................................................
+dlswDirGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswDirMacEntries,
+        dlswDirMacCacheHits,
+        dlswDirMacCacheMisses,
+        dlswDirMacCacheNextIndex,
+        dlswDirMacMac,
+        dlswDirMacMask,
+        dlswDirMacEntryType,
+        dlswDirMacLocationType,
+        dlswDirMacLocation,
+        dlswDirMacStatus,
+        dlswDirMacLFSize,
+        dlswDirMacRowStatus
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw directory using MAC
+        addresses."
+    ::= { dlswGroups 10 }
+
+-- ...................................................................
+dlswDirNBGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswDirNBEntries,
+        dlswDirNBCacheHits,
+        dlswDirNBCacheMisses,
+        dlswDirNBCacheNextIndex,
+        dlswDirNBName,
+        dlswDirNBNameType,
+        dlswDirNBEntryType,
+        dlswDirNBLocationType,
+        dlswDirNBLocation,
+        dlswDirNBStatus,
+        dlswDirNBLFSize,
+        dlswDirNBRowStatus
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw directory using NetBIOS
+        names."
+    ::= { dlswGroups 11 }
+
+-- ...................................................................
+dlswDirLocateGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswDirLocateMacLocation
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for a node that can return directory
+        entry order for a given MAC address."
+    ::= { dlswGroups 12 }
+
+-- ...................................................................
+dlswDirLocateNBGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswDirLocateNBLocation
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for a node that can return directory
+        entry order for a given NetBIOS name."
+    ::= { dlswGroups 13 }
+
+-- ...................................................................
+dlswCircuitStatGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswCircuitStatActives,
+        dlswCircuitStatCreates
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for statistics about circuits."
+    ::= { dlswGroups 14 }
+
+-- ...................................................................
+dlswCircuitGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswCircuitS1IfIndex,
+        dlswCircuitS1DlcType,
+        dlswCircuitS1RouteInfo,
+        dlswCircuitS1CircuitId,
+        dlswCircuitS1Dlc,
+        dlswCircuitS2Location,
+        dlswCircuitS2TDomain,
+        dlswCircuitS2TAddress,
+        dlswCircuitS2CircuitId,
+        dlswCircuitOrigin,
+        dlswCircuitEntryTime,
+        dlswCircuitStateTime,
+        dlswCircuitState,
+        dlswCircuitPriority,
+        dlswCircuitFCSendGrantedUnits,
+        dlswCircuitFCSendCurrentWndw,
+        dlswCircuitFCRecvGrantedUnits,
+        dlswCircuitFCRecvCurrentWndw,
+        dlswCircuitFCLargestRecvGranted,
+        dlswCircuitFCLargestSendGranted,
+        dlswCircuitFCHalveWndwSents,
+        dlswCircuitFCResetOpSents,
+        dlswCircuitFCHalveWndwRcvds,
+        dlswCircuitFCResetOpRcvds,
+        dlswCircuitDiscReasonLocal,
+        dlswCircuitDiscReasonRemote,
+        dlswCircuitDiscReasonRemoteData
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw circuits."
+    ::= { dlswGroups 15 }
+
+-- ...................................................................
+dlswSdlcGroup  OBJECT-GROUP
+    OBJECTS  {
+        dlswSdlcLsEntries,
+        dlswSdlcLsLocalMac,
+        dlswSdlcLsLocalSap,
+        dlswSdlcLsLocalIdBlock,
+        dlswSdlcLsLocalIdNum,
+        dlswSdlcLsRemoteMac,
+        dlswSdlcLsRemoteSap,
+        dlswSdlcLsRowStatus
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw SDLC support."
+    ::= { dlswGroups 16 }
+
+-- ...................................................................
+dlswNotificationGroup  NOTIFICATION-GROUP
+
+    NOTIFICATIONS  {
+        dlswTrapTConnPartnerReject,
+        dlswTrapTConnProtViolation,
+        dlswTrapTConnUp,
+        dlswTrapTConnDown,
+        dlswTrapCircuitUp,
+        dlswTrapCircuitDown
+        }
+    STATUS current
+    DESCRIPTION
+       "Conformance group for DLSw notifications."
+    ::= { dlswGroups 17 }
+
+END
diff --git a/snmp_builder/mibs/DNS-RESOLVER-MIB.mib b/snmp_builder/mibs/DNS-RESOLVER-MIB.mib
new file mode 100644
index 0000000..accc2eb
--- /dev/null
+++ b/snmp_builder/mibs/DNS-RESOLVER-MIB.mib
@@ -0,0 +1,1196 @@
+DNS-RESOLVER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Integer32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, DisplayString
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    dns, DnsName, DnsNameAsIndex, DnsClass, DnsType, DnsQClass,
+    DnsQType, DnsTime, DnsOpCode, DnsRespCode
+        FROM DNS-SERVER-MIB;
+
+-- DNS Resolver MIB
+
+dnsResMIB MODULE-IDENTITY
+    LAST-UPDATED "9401282250Z"
+    ORGANIZATION "IETF DNS Working Group"
+    CONTACT-INFO
+            "       Rob Austein
+            Postal: Epilogue Technology Corporation
+                    268 Main Street, Suite 283
+                    North Reading, MA 10864
+                    US
+               Tel: +1 617 245 0804
+               Fax: +1 617 245 8122
+            E-Mail: sra@epilogue.com
+
+                    Jon Saperia
+            Postal: Digital Equipment Corporation
+                    110 Spit Brook Road
+                    ZKO1-3/H18
+                    Nashua, NH 03062-2698
+                    US
+               Tel: +1 603 881 0480
+               Fax: +1 603 881 0120
+            E-mail: saperia@zko.dec.com"
+    DESCRIPTION
+            "The MIB module for entities implementing the client
+            (resolver) side of the Domain Name System (DNS)
+            protocol."
+    ::= { dns 2 }
+
+dnsResMIBObjects        OBJECT IDENTIFIER ::= { dnsResMIB 1 }
+
+-- (Old-style) groups in the DNS resolver MIB.
+
+dnsResConfig            OBJECT IDENTIFIER ::= { dnsResMIBObjects 1 }
+dnsResCounter           OBJECT IDENTIFIER ::= { dnsResMIBObjects 2 }
+dnsResLameDelegation    OBJECT IDENTIFIER ::= { dnsResMIBObjects 3 }
+dnsResCache             OBJECT IDENTIFIER ::= { dnsResMIBObjects 4 }
+dnsResNCache            OBJECT IDENTIFIER ::= { dnsResMIBObjects 5 }
+dnsResOptCounter        OBJECT IDENTIFIER ::= { dnsResMIBObjects 6 }
+
+-- Resolver Configuration Group
+
+dnsResConfigImplementIdent OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The implementation identification string for the
+            resolver software in use on the system, for example;
+            `RES-2.1'"
+    ::= { dnsResConfig 1 }
+
+dnsResConfigService OBJECT-TYPE
+    SYNTAX      INTEGER { recursiveOnly(1),
+                          iterativeOnly(2),
+                          recursiveAndIterative(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Kind of DNS resolution service provided:
+
+            recursiveOnly(1) indicates a stub resolver.
+
+            iterativeOnly(2) indicates a normal full service
+            resolver.
+
+            recursiveAndIterative(3) indicates a full-service
+            resolver which performs a mix of recursive and iterative
+            queries."
+     ::= { dnsResConfig 2 }
+
+dnsResConfigMaxCnames OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Limit on how many CNAMEs the resolver should allow
+            before deciding that there's a CNAME loop.  Zero means
+            that resolver has no explicit CNAME limit."
+    REFERENCE
+            "RFC-1035 section 7.1."
+    ::= { dnsResConfig 3 }
+
+-- DNS Resolver Safety Belt Table
+
+dnsResConfigSbeltTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsResConfigSbeltEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of safety belt information used by the resolver
+            when it hasn't got any better idea of where to send a
+            query, such as when the resolver is booting or is a stub
+            resolver."
+    ::= { dnsResConfig 4 }
+
+dnsResConfigSbeltEntry OBJECT-TYPE
+    SYNTAX      DnsResConfigSbeltEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the resolver's Sbelt table.
+            Rows may be created or deleted at any time by the DNS
+            resolver and by SNMP SET requests.  Whether the values
+            changed via SNMP are saved in stable storage across
+            `reset' operations is implementation-specific."
+    INDEX     { dnsResConfigSbeltAddr,
+                dnsResConfigSbeltSubTree,
+                dnsResConfigSbeltClass }
+    ::= { dnsResConfigSbeltTable 1 }
+
+DnsResConfigSbeltEntry ::=
+    SEQUENCE {
+        dnsResConfigSbeltAddr
+            IpAddress,
+        dnsResConfigSbeltName
+            DnsName,
+        dnsResConfigSbeltRecursion
+            INTEGER,
+        dnsResConfigSbeltPref
+            INTEGER,
+        dnsResConfigSbeltSubTree
+
+            DnsNameAsIndex,
+        dnsResConfigSbeltClass
+            DnsClass,
+        dnsResConfigSbeltStatus
+            RowStatus
+    }
+
+dnsResConfigSbeltAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The IP address of the Sbelt name server identified by
+            this row of the table."
+    ::= { dnsResConfigSbeltEntry 1 }
+
+dnsResConfigSbeltName OBJECT-TYPE
+    SYNTAX      DnsName
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The DNS name of a Sbelt nameserver identified by this
+            row of the table.  A zero-length string indicates that
+            the name is not known by the resolver."
+    ::= { dnsResConfigSbeltEntry 2 }
+
+dnsResConfigSbeltRecursion OBJECT-TYPE
+    SYNTAX      INTEGER { iterative(1),
+                          recursive(2),
+                          recursiveAndIterative(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "Kind of queries resolver will be sending to the name
+            server identified in this row of the table:
+
+            iterative(1) indicates that resolver will be directing
+            iterative queries to this name server (RD bit turned
+            off).
+
+            recursive(2) indicates that resolver will be directing
+            recursive queries to this name server (RD bit turned
+            on).
+
+            recursiveAndIterative(3) indicates that the resolver
+            will be directing both recursive and iterative queries
+            to the server identified in this row of the table."
+     ::= { dnsResConfigSbeltEntry 3 }
+
+dnsResConfigSbeltPref OBJECT-TYPE
+    SYNTAX      INTEGER (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This value identifies the preference for the name server
+            identified in this row of the table.  The lower the
+            value, the more desirable the resolver considers this
+            server."
+     ::= { dnsResConfigSbeltEntry 4 }
+
+dnsResConfigSbeltSubTree OBJECT-TYPE
+    SYNTAX      DnsNameAsIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Queries sent to the name server identified by this row
+            of the table are limited to those for names in the name
+            subtree identified by this variable.  If no such
+            limitation applies, the value of this variable is the
+            name of the root domain (a DNS name consisting of a
+            single zero octet)."
+    ::= { dnsResConfigSbeltEntry 5 }
+
+dnsResConfigSbeltClass OBJECT-TYPE
+    SYNTAX      DnsClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The class of DNS queries that will be sent to the server
+            identified by this row of the table."
+    ::= { dnsResConfigSbeltEntry 6 }
+
+dnsResConfigSbeltStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "Row status column for this row of the Sbelt table."
+    ::= { dnsResConfigSbeltEntry 7 }
+
+dnsResConfigUpTime OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "If the resolver has a persistent state (e.g., a
+            process), this value will be the time elapsed since it
+
+            started.  For software without persistant state, this
+            value will be 0."
+    ::= { dnsResConfig 5 }
+
+dnsResConfigResetTime OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "If the resolver has a persistent state (e.g., a process)
+            and supports a `reset' operation (e.g., can be told to
+            re-read configuration files), this value will be the
+            time elapsed since the last time the resolver was
+            `reset.'  For software that does not have persistence or
+            does not support a `reset' operation, this value will be
+            zero."
+    ::= { dnsResConfig 6 }
+
+dnsResConfigReset OBJECT-TYPE
+    SYNTAX      INTEGER { other(1),
+                          reset(2),
+                          initializing(3),
+                          running(4) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status/action object to reinitialize any persistant
+            resolver state.  When set to reset(2), any persistant
+            resolver state (such as a process) is reinitialized as if
+            the resolver had just been started.  This value will
+            never be returned by a read operation.  When read, one of
+            the following values will be returned:
+                other(1) - resolver in some unknown state;
+                initializing(3) - resolver (re)initializing;
+                running(4) - resolver currently running."
+    ::= { dnsResConfig 7 }
+
+-- Resolver Counters Group
+
+-- Resolver Counter Table
+
+dnsResCounterByOpcodeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsResCounterByOpcodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of the current count of resolver queries and
+
+            answers."
+    ::= { dnsResCounter 3 }
+
+dnsResCounterByOpcodeEntry OBJECT-TYPE
+    SYNTAX      DnsResCounterByOpcodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entry in the resolver counter table.  Entries are
+            indexed by DNS OpCode."
+    INDEX     { dnsResCounterByOpcodeCode }
+    ::= { dnsResCounterByOpcodeTable 1 }
+
+DnsResCounterByOpcodeEntry ::=
+    SEQUENCE {
+        dnsResCounterByOpcodeCode
+            DnsOpCode,
+        dnsResCounterByOpcodeQueries
+            Counter32,
+        dnsResCounterByOpcodeResponses
+            Counter32
+    }
+
+dnsResCounterByOpcodeCode OBJECT-TYPE
+    SYNTAX      DnsOpCode
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The index to this table.  The OpCodes that have already
+            been defined are found in RFC-1035."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    ::= { dnsResCounterByOpcodeEntry 1 }
+
+dnsResCounterByOpcodeQueries OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of queries that have sent out by the
+            resolver since initialization for the OpCode which is
+            the index to this row of the table."
+    ::= { dnsResCounterByOpcodeEntry 2 }
+
+dnsResCounterByOpcodeResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of responses that have been received by the
+            resolver since initialization for the OpCode which is
+            the index to this row of the table."
+    ::= { dnsResCounterByOpcodeEntry 3 }
+
+-- Resolver Response Code Counter Table
+
+dnsResCounterByRcodeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsResCounterByRcodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of the current count of responses to resolver
+            queries."
+    ::= { dnsResCounter 4 }
+
+dnsResCounterByRcodeEntry OBJECT-TYPE
+    SYNTAX      DnsResCounterByRcodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entry in the resolver response table.  Entries are
+            indexed by DNS response code."
+    INDEX     { dnsResCounterByRcodeCode }
+    ::= { dnsResCounterByRcodeTable 1 }
+
+DnsResCounterByRcodeEntry ::=
+    SEQUENCE {
+        dnsResCounterByRcodeCode
+            DnsRespCode,
+        dnsResCounterByRcodeResponses
+            Counter32
+    }
+
+dnsResCounterByRcodeCode OBJECT-TYPE
+    SYNTAX      DnsRespCode
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The index to this table.  The Response Codes that have
+            already been defined are found in RFC-1035."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    ::= { dnsResCounterByRcodeEntry 1 }
+
+dnsResCounterByRcodeResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of responses the resolver has received for the
+            response code value which identifies this row of the
+            table."
+    ::= { dnsResCounterByRcodeEntry 2 }
+
+-- Additional DNS Resolver Counter Objects
+
+dnsResCounterNonAuthDataResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests made by the resolver for which a
+            non-authoritative answer (cached data) was received."
+    ::= { dnsResCounter 5 }
+
+dnsResCounterNonAuthNoDataResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests made by the resolver for which a
+            non-authoritative answer - no such data response (empty
+            answer) was received."
+    ::= { dnsResCounter 6 }
+
+dnsResCounterMartians OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of responses received which were received from
+            servers that the resolver does not think it asked."
+    ::= { dnsResCounter 7 }
+
+dnsResCounterRecdResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of responses received to all queries."
+    ::= { dnsResCounter 8 }
+
+dnsResCounterUnparseResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of responses received which were unparseable."
+    ::= { dnsResCounter 9 }
+
+dnsResCounterFallbacks OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of times the resolver had to fall back to its
+            seat belt information."
+    ::= { dnsResCounter 10 }
+
+-- Lame Delegation Group
+
+dnsResLameDelegationOverflows OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of times the resolver attempted to add an entry
+            to the Lame Delegation table but was unable to for some
+            reason such as space constraints."
+    ::= { dnsResLameDelegation 1 }
+
+-- Lame Delegation Table
+
+dnsResLameDelegationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsResLameDelegationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of name servers returning lame delegations.
+
+            A lame delegation has occured when a parent zone
+            delegates authority for a child zone to a server that
+            appears not to think that it is authoritative for the
+            child zone in question."
+    ::= { dnsResLameDelegation 2 }
+
+dnsResLameDelegationEntry OBJECT-TYPE
+    SYNTAX      DnsResLameDelegationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entry in lame delegation table.  Only the resolver may
+            create rows in this table.  SNMP SET requests may be used
+            to delete rows."
+    INDEX     { dnsResLameDelegationSource,
+                dnsResLameDelegationName,
+                dnsResLameDelegationClass }
+    ::= { dnsResLameDelegationTable 1 }
+
+DnsResLameDelegationEntry ::=
+    SEQUENCE {
+        dnsResLameDelegationSource
+            IpAddress,
+        dnsResLameDelegationName
+            DnsNameAsIndex,
+        dnsResLameDelegationClass
+            DnsClass,
+        dnsResLameDelegationCounts
+            Counter32,
+        dnsResLameDelegationStatus
+            RowStatus
+    }
+
+dnsResLameDelegationSource OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Source of lame delegation."
+    ::= { dnsResLameDelegationEntry 1 }
+
+dnsResLameDelegationName OBJECT-TYPE
+    SYNTAX      DnsNameAsIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS name for which lame delegation was received."
+    ::= { dnsResLameDelegationEntry 2 }
+
+dnsResLameDelegationClass OBJECT-TYPE
+    SYNTAX      DnsClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS class of received lame delegation."
+    ::= { dnsResLameDelegationEntry 3 }
+
+dnsResLameDelegationCounts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "How many times this lame delegation has been received."
+    ::= { dnsResLameDelegationEntry 4 }
+
+dnsResLameDelegationStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status column for the lame delegation table.  Since only
+            the agent (DNS resolver) creates rows in this table, the
+            only values that a manager may write to this variable
+            are active(1) and destroy(6)."
+    ::= { dnsResLameDelegationEntry 5 }
+
+-- Resolver Cache Group
+
+dnsResCacheStatus OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2), clear(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status/action for the resolver's cache.
+
+            enabled(1) means that the use of the cache is allowed.
+            Query operations can return this state.
+
+            disabled(2) means that the cache is not being used.
+            Query operations can return this state.
+
+            Setting this variable to clear(3) deletes the entire
+            contents of the resolver's cache, but does not otherwise
+            change the resolver's state.  The status will retain its
+            previous value from before the clear operation (i.e.,
+            enabled(1) or disabled(2)).  The value of clear(3) can
+            NOT be returned by a query operation."
+    ::= { dnsResCache 1 }
+
+dnsResCacheMaxTTL OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Maximum Time-To-Live for RRs in this cache.  If the
+            resolver does not implement a TTL ceiling, the value of
+            this field should be zero."
+    ::= { dnsResCache 2 }
+
+dnsResCacheGoodCaches OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of RRs the resolver has cached successfully."
+    ::= { dnsResCache 3 }
+
+dnsResCacheBadCaches OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of RRs the resolver has refused to cache because
+            they appear to be dangerous or irrelevant.  E.g., RRs
+            with suspiciously high TTLs, unsolicited root
+            information, or that just don't appear to be relevant to
+            the question the resolver asked."
+    ::= { dnsResCache 4 }
+
+-- Resolver Cache Table
+
+dnsResCacheRRTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsResCacheRREntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains information about all the resource
+            records currently in the resolver's cache."
+    ::= { dnsResCache 5 }
+
+dnsResCacheRREntry OBJECT-TYPE
+    SYNTAX      DnsResCacheRREntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the resolvers's cache.  Rows may be created
+            only by the resolver.  SNMP SET requests may be used to
+            delete rows."
+    INDEX     { dnsResCacheRRName,
+                dnsResCacheRRClass,
+                dnsResCacheRRType,
+                dnsResCacheRRIndex }
+    ::= { dnsResCacheRRTable 1 }
+
+DnsResCacheRREntry ::=
+    SEQUENCE {
+        dnsResCacheRRName
+            DnsNameAsIndex,
+        dnsResCacheRRClass
+            DnsClass,
+        dnsResCacheRRType
+            DnsType,
+        dnsResCacheRRTTL
+            DnsTime,
+        dnsResCacheRRElapsedTTL
+            DnsTime,
+        dnsResCacheRRSource
+            IpAddress,
+        dnsResCacheRRData
+            OCTET STRING,
+        dnsResCacheRRStatus
+            RowStatus,
+        dnsResCacheRRIndex
+            Integer32,
+        dnsResCacheRRPrettyName
+            DnsName
+    }
+
+dnsResCacheRRName OBJECT-TYPE
+    SYNTAX      DnsNameAsIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Owner name of the Resource Record in the cache which is
+            identified in this row of the table.  As described in
+            RFC-1034, the owner of the record is the domain name
+            were the RR is found."
+    REFERENCE
+            "RFC-1034 section 3.6."
+    ::= { dnsResCacheRREntry 1 }
+
+dnsResCacheRRClass OBJECT-TYPE
+    SYNTAX      DnsClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS class of the Resource Record in the cache which is
+            identified in this row of the table."
+    ::= { dnsResCacheRREntry 2 }
+
+dnsResCacheRRType OBJECT-TYPE
+    SYNTAX      DnsType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS type of the Resource Record in the cache which is
+            identified in this row of the table."
+    ::= { dnsResCacheRREntry 3 }
+
+dnsResCacheRRTTL OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Time-To-Live of RR in DNS cache.  This is the initial
+            TTL value which was received with the RR when it was
+            originally received."
+    ::= { dnsResCacheRREntry 4 }
+
+dnsResCacheRRElapsedTTL OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Elapsed seconds since RR was received."
+    ::= { dnsResCacheRREntry 5 }
+
+dnsResCacheRRSource OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Host from which RR was received, 0.0.0.0 if unknown."
+    ::= { dnsResCacheRREntry 6 }
+
+dnsResCacheRRData OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "RDATA portion of a cached RR.  The value is in the
+            format defined for the particular DNS class and type of
+            the resource record."
+    REFERENCE
+            "RFC-1035 section 3.2.1."
+    ::= { dnsResCacheRREntry 7 }
+
+dnsResCacheRRStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status column for the resolver cache table.  Since only
+            the agent (DNS resolver) creates rows in this table, the
+            only values that a manager may write to this variable
+            are active(1) and destroy(6)."
+    ::= { dnsResCacheRREntry 8 }
+
+dnsResCacheRRIndex OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A value which makes entries in the table unique when the
+            other index values (dnsResCacheRRName,
+            dnsResCacheRRClass, and dnsResCacheRRType) do not
+            provide a unique index."
+    ::= { dnsResCacheRREntry 9 }
+
+dnsResCacheRRPrettyName OBJECT-TYPE
+    SYNTAX      DnsName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Name of the RR at this row in the table.  This is
+            identical to the dnsResCacheRRName variable, except that
+            character case is preserved in this variable, per DNS
+            conventions."
+    REFERENCE
+            "RFC-1035 section 2.3.3."
+    ::= { dnsResCacheRREntry 10 }
+
+-- Resolver Negative Cache Group
+
+dnsResNCacheStatus OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2), clear(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status/action for the resolver's negative response
+            cache.
+
+            enabled(1) means that the use of the negative response
+            cache is allowed.  Query operations can return this
+            state.
+
+            disabled(2) means that the negative response cache is
+            not being used.  Query operations can return this state.
+
+            Setting this variable to clear(3) deletes the entire
+            contents of the resolver's negative response cache.  The
+            status will retain its previous value from before the
+            clear operation (i.e., enabled(1) or disabled(2)).  The
+            value of clear(3) can NOT be returned by a query
+            operation."
+    ::= { dnsResNCache 1 }
+
+dnsResNCacheMaxTTL OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Maximum Time-To-Live for cached authoritative errors.
+            If the resolver does not implement a TTL ceiling, the
+            value of this field should be zero."
+    ::= { dnsResNCache 2 }
+
+dnsResNCacheGoodNCaches OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of authoritative errors the resolver has cached
+            successfully."
+    ::= { dnsResNCache 3 }
+
+dnsResNCacheBadNCaches OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of authoritative errors the resolver would have
+            liked to cache but was unable to because the appropriate
+            SOA RR was not supplied or looked suspicious."
+    REFERENCE
+            "RFC-1034 section 4.3.4."
+    ::= { dnsResNCache 4 }
+
+-- Resolver Negative Cache Table
+
+dnsResNCacheErrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsResNCacheErrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The resolver's negative response cache.  This table
+            contains information about authoritative errors that
+            have been cached by the resolver."
+    ::= { dnsResNCache 5 }
+
+dnsResNCacheErrEntry OBJECT-TYPE
+    SYNTAX      DnsResNCacheErrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the resolver's negative response cache
+            table.  Only the resolver can create rows.  SNMP SET
+            requests may be used to delete rows."
+    INDEX     { dnsResNCacheErrQName,
+                dnsResNCacheErrQClass,
+                dnsResNCacheErrQType,
+                dnsResNCacheErrIndex }
+    ::= { dnsResNCacheErrTable 1 }
+
+DnsResNCacheErrEntry ::=
+    SEQUENCE {
+        dnsResNCacheErrQName
+            DnsNameAsIndex,
+        dnsResNCacheErrQClass
+            DnsQClass,
+        dnsResNCacheErrQType
+            DnsQType,
+        dnsResNCacheErrTTL
+            DnsTime,
+        dnsResNCacheErrElapsedTTL
+            DnsTime,
+        dnsResNCacheErrSource
+            IpAddress,
+        dnsResNCacheErrCode
+            INTEGER,
+        dnsResNCacheErrStatus
+            RowStatus,
+        dnsResNCacheErrIndex
+            Integer32,
+        dnsResNCacheErrPrettyName
+            DnsName
+    }
+
+dnsResNCacheErrQName OBJECT-TYPE
+    SYNTAX      DnsNameAsIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "QNAME associated with a cached authoritative error."
+    REFERENCE
+            "RFC-1034 section 3.7.1."
+    ::= { dnsResNCacheErrEntry 1 }
+
+dnsResNCacheErrQClass OBJECT-TYPE
+    SYNTAX      DnsQClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS QCLASS associated with a cached authoritative
+            error."
+    ::= { dnsResNCacheErrEntry 2 }
+
+dnsResNCacheErrQType OBJECT-TYPE
+    SYNTAX      DnsQType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS QTYPE associated with a cached authoritative error."
+    ::= { dnsResNCacheErrEntry 3 }
+
+dnsResNCacheErrTTL OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Time-To-Live of a cached authoritative error at the time
+            of the error, it should not be decremented by the number
+            of seconds since it was received.  This should be the
+            TTL as copied from the MINIMUM field of the SOA that
+            accompanied the authoritative error, or a smaller value
+            if the resolver implements a ceiling on negative
+            response cache TTLs."
+    REFERENCE
+            "RFC-1034 section 4.3.4."
+    ::= { dnsResNCacheErrEntry 4 }
+
+dnsResNCacheErrElapsedTTL OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Elapsed seconds since authoritative error was received."
+    ::= { dnsResNCacheErrEntry 5 }
+
+dnsResNCacheErrSource OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Host which sent the authoritative error, 0.0.0.0 if
+            unknown."
+    ::= { dnsResNCacheErrEntry 6 }
+
+dnsResNCacheErrCode OBJECT-TYPE
+    SYNTAX      INTEGER { nonexistantName(1), noData(2), other(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The authoritative error that has been cached:
+
+            nonexistantName(1) indicates an authoritative name error
+            (RCODE = 3).
+
+            noData(2) indicates an authoritative response with no
+            error (RCODE = 0) and no relevant data.
+
+            other(3) indicates some other cached authoritative
+            error.  At present, no such errors are known to exist."
+    ::= { dnsResNCacheErrEntry 7 }
+
+dnsResNCacheErrStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status column for the resolver negative response cache
+            table.  Since only the agent (DNS resolver) creates rows
+            in this table, the only values that a manager may write
+            to this variable are active(1) and destroy(6)."
+    ::= { dnsResNCacheErrEntry 8 }
+
+dnsResNCacheErrIndex OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value which makes entries in the table unique when the
+            other index values (dnsResNCacheErrQName,
+            dnsResNCacheErrQClass, and dnsResNCacheErrQType) do not
+            provide a unique index."
+    ::= { dnsResNCacheErrEntry 9 }
+
+dnsResNCacheErrPrettyName OBJECT-TYPE
+    SYNTAX      DnsName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "QNAME associated with this row in the table.  This is
+            identical to the dnsResNCacheErrQName variable, except
+            that character case is preserved in this variable, per
+            DNS conventions."
+    REFERENCE
+            "RFC-1035 section 2.3.3."
+    ::= { dnsResNCacheErrEntry 10 }
+
+-- Resolver Optional Counters Group
+
+dnsResOptCounterReferals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of responses which were received from servers
+            redirecting query to another server."
+    ::= { dnsResOptCounter 1 }
+
+dnsResOptCounterRetrans OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number requests retransmitted for all reasons."
+    ::= { dnsResOptCounter 2 }
+
+dnsResOptCounterNoResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries that were retransmitted because of no
+            response."
+    ::= { dnsResOptCounter 3 }
+
+dnsResOptCounterRootRetrans OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries that were retransmitted that were to
+
+            root servers."
+    ::= { dnsResOptCounter 4 }
+
+dnsResOptCounterInternals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests internally generated by the
+            resolver."
+    ::= { dnsResOptCounter 5 }
+
+dnsResOptCounterInternalTimeOuts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests internally generated which timed
+            out."
+    ::= { dnsResOptCounter 6 }
+
+-- SNMPv2 groups.
+
+dnsResMIBGroups         OBJECT IDENTIFIER ::= { dnsResMIB 2 }
+
+dnsResConfigGroup OBJECT-GROUP
+    OBJECTS   { dnsResConfigImplementIdent,
+                dnsResConfigService,
+                dnsResConfigMaxCnames,
+                dnsResConfigSbeltAddr,
+                dnsResConfigSbeltName,
+                dnsResConfigSbeltRecursion,
+                dnsResConfigSbeltPref,
+                dnsResConfigSbeltSubTree,
+                dnsResConfigSbeltClass,
+                dnsResConfigSbeltStatus,
+                dnsResConfigUpTime,
+                dnsResConfigResetTime }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing basic configuration
+            information for a DNS resolver implementation."
+    ::= { dnsResMIBGroups 1 }
+
+dnsResCounterGroup OBJECT-GROUP
+    OBJECTS   { dnsResCounterByOpcodeCode,
+                dnsResCounterByOpcodeQueries,
+                dnsResCounterByOpcodeResponses,
+                dnsResCounterByRcodeCode,
+                dnsResCounterByRcodeResponses,
+                dnsResCounterNonAuthDataResps,
+                dnsResCounterNonAuthNoDataResps,
+                dnsResCounterMartians,
+                dnsResCounterRecdResponses,
+                dnsResCounterUnparseResps,
+                dnsResCounterFallbacks }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing basic instrumentation
+            of a DNS resolver implementation."
+    ::= { dnsResMIBGroups 2 }
+
+dnsResLameDelegationGroup OBJECT-GROUP
+    OBJECTS   { dnsResLameDelegationOverflows,
+                dnsResLameDelegationSource,
+                dnsResLameDelegationName,
+                dnsResLameDelegationClass,
+                dnsResLameDelegationCounts,
+                dnsResLameDelegationStatus }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing instrumentation of
+            `lame delegation' failures."
+    ::= { dnsResMIBGroups 3 }
+
+dnsResCacheGroup OBJECT-GROUP
+    OBJECTS   { dnsResCacheStatus,
+                dnsResCacheMaxTTL,
+                dnsResCacheGoodCaches,
+                dnsResCacheBadCaches,
+                dnsResCacheRRName,
+                dnsResCacheRRClass,
+                dnsResCacheRRType,
+                dnsResCacheRRTTL,
+                dnsResCacheRRElapsedTTL,
+                dnsResCacheRRSource,
+                dnsResCacheRRData,
+                dnsResCacheRRStatus,
+                dnsResCacheRRIndex,
+                dnsResCacheRRPrettyName }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing access to and control
+            of a DNS resolver's cache."
+    ::= { dnsResMIBGroups 4 }
+
+dnsResNCacheGroup OBJECT-GROUP
+    OBJECTS   { dnsResNCacheStatus,
+                dnsResNCacheMaxTTL,
+                dnsResNCacheGoodNCaches,
+                dnsResNCacheBadNCaches,
+                dnsResNCacheErrQName,
+                dnsResNCacheErrQClass,
+                dnsResNCacheErrQType,
+                dnsResNCacheErrTTL,
+                dnsResNCacheErrElapsedTTL,
+                dnsResNCacheErrSource,
+                dnsResNCacheErrCode,
+                dnsResNCacheErrStatus,
+                dnsResNCacheErrIndex,
+                dnsResNCacheErrPrettyName }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing access to and control
+            of a DNS resolver's negative response cache."
+    ::= { dnsResMIBGroups 5 }
+
+dnsResOptCounterGroup OBJECT-GROUP
+    OBJECTS   { dnsResOptCounterReferals,
+                dnsResOptCounterRetrans,
+                dnsResOptCounterNoResponses,
+                dnsResOptCounterRootRetrans,
+                dnsResOptCounterInternals,
+                dnsResOptCounterInternalTimeOuts }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing further
+            instrumentation applicable to many but not all DNS
+            resolvers."
+    ::= { dnsResMIBGroups 6 }
+
+-- Compliances.
+
+dnsResMIBCompliances OBJECT IDENTIFIER ::= { dnsResMIB 3 }
+
+dnsResMIBCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+            "The compliance statement for agents implementing the DNS
+            resolver MIB extensions."
+    MODULE -- This MIB module
+
+        MANDATORY-GROUPS { dnsResConfigGroup, dnsResCounterGroup }
+        GROUP   dnsResCacheGroup
+        DESCRIPTION
+            "The resolver cache group is mandatory for resolvers that
+            implement a cache."
+        GROUP   dnsResNCacheGroup
+        DESCRIPTION
+            "The resolver negative cache group is mandatory for
+            resolvers that implement a negative response cache."
+        GROUP   dnsResLameDelegationGroup
+        DESCRIPTION
+            "The lame delegation group is unconditionally optional."
+        GROUP   dnsResOptCounterGroup
+        DESCRIPTION
+            "The optional counters group is unconditionally
+            optional."
+        OBJECT  dnsResConfigMaxCnames
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResConfigSbeltName
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResConfigSbeltRecursion
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResConfigSbeltPref
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResConfigReset
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResCacheStatus
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResCacheMaxTTL
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsResNCacheStatus
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+
+        OBJECT  dnsResNCacheMaxTTL
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+    ::= { dnsResMIBCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/DNS-SERVER-MIB.mib b/snmp_builder/mibs/DNS-SERVER-MIB.mib
new file mode 100644
index 0000000..c821470
--- /dev/null
+++ b/snmp_builder/mibs/DNS-SERVER-MIB.mib
@@ -0,0 +1,1078 @@
+DNS-SERVER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    mib-2
+        FROM RFC-1213
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+    IpAddress, Counter32, Gauge32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+dns OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "The OID assigned to DNS MIB work by the IANA."
+    ::= { mib-2 32 }
+
+dnsServMIB MODULE-IDENTITY
+    LAST-UPDATED "9401282251Z"
+    ORGANIZATION "IETF DNS Working Group"
+    CONTACT-INFO
+            "       Rob Austein
+            Postal: Epilogue Technology Corporation
+                    268 Main Street, Suite 283
+                    North Reading, MA 10864
+                    US
+               Tel: +1 617 245 0804
+               Fax: +1 617 245 8122
+            E-Mail: sra@epilogue.com
+
+                    Jon Saperia
+            Postal: Digital Equipment Corporation
+                    110 Spit Brook Road
+                    ZKO1-3/H18
+                    Nashua, NH 03062-2698
+                    US
+               Tel: +1 603 881 0480
+               Fax: +1 603 881 0120
+             Email: saperia@zko.dec.com"
+    DESCRIPTION
+            "The MIB module for entities implementing the server side
+            of the Domain Name System (DNS) protocol."
+    ::= { dns 1 }
+
+dnsServMIBObjects       OBJECT IDENTIFIER ::= { dnsServMIB 1 }
+
+-- (Old-style) groups in the DNS server MIB.
+
+dnsServConfig           OBJECT IDENTIFIER ::= { dnsServMIBObjects 1 }
+dnsServCounter          OBJECT IDENTIFIER ::= { dnsServMIBObjects 2 }
+dnsServOptCounter       OBJECT IDENTIFIER ::= { dnsServMIBObjects 3 }
+dnsServZone             OBJECT IDENTIFIER ::= { dnsServMIBObjects 4 }
+
+-- Textual conventions
+
+DnsName ::= TEXTUAL-CONVENTION
+    -- A DISPLAY-HINT would be nice, but difficult to express.
+    STATUS  current
+    DESCRIPTION
+            "A DNS name is a sequence of labels.  When DNS names are
+            displayed, the boundaries between labels are typically
+            indicated by dots (e.g. `Acme' and `COM' are labels in
+            the name `Acme.COM').  In the DNS protocol, however, no
+            such separators are needed because each label is encoded
+            as a length octet followed by the indicated number of
+            octets of label.  For example, `Acme.COM' is encoded as
+            the octet sequence { 4, 'A', 'c', 'm', 'e', 3, 'C', 'O',
+            'M', 0 } (the final 0 is the length of the name of the
+            root domain, which appears implicitly at the end of any
+            DNS name).  This MIB uses the same encoding as the DNS
+            protocol.
+
+            A DnsName must always be a fully qualified name.  It is
+            an error to encode a relative domain name as a DnsName
+            without first making it a fully qualified name."
+    REFERENCE
+            "RFC-1034 section 3.1."
+    SYNTAX  OCTET STRING (SIZE (0..255))
+
+DnsNameAsIndex ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "This textual convention is like a DnsName, but is used
+            as an index componant in tables.  Alphabetic characters
+            in names of this type are restricted to uppercase: the
+            characters 'a' through 'z' are mapped to the characters
+            'A' through 'Z'.  This restriction is intended to make
+            the lexical ordering imposed by SNMP useful when applied
+            to DNS names.
+
+            Note that it is theoretically possible for a valid DNS
+
+            name to exceed the allowed length of an SNMP object
+            identifer, and thus be impossible to represent in tables
+            in this MIB that are indexed by DNS name.  Sampling of
+            DNS names in current use on the Internet suggests that
+            this limit does not pose a serious problem in practice."
+    REFERENCE
+            "RFC-1034 section 3.1, RFC-1448 section 4.1."
+    SYNTAX  DnsName
+
+DnsClass ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d"
+    STATUS  current
+    DESCRIPTION
+            "This data type is used to represent the class values
+            which appear in Resource Records in the DNS.  A 16-bit
+            unsigned integer is used to allow room for new classes
+            of records to be defined.  Existing standard classes are
+            listed in the DNS specifications."
+    REFERENCE
+            "RFC-1035 section 3.2.4."
+    SYNTAX  INTEGER (0..65535)
+
+DnsType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d"
+    STATUS  current
+    DESCRIPTION
+            "This data type is used to represent the type values
+            which appear in Resource Records in the DNS.  A 16-bit
+            unsigned integer is used to allow room for new record
+            types to be defined.  Existing standard types are listed
+            in the DNS specifications."
+    REFERENCE
+            "RFC-1035 section 3.2.2."
+    SYNTAX  INTEGER (0..65535)
+
+DnsQClass ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d"
+    STATUS  current
+    DESCRIPTION
+            "This data type is used to represent the QClass values
+            which appear in Resource Records in the DNS.  A 16-bit
+            unsigned integer is used to allow room for new QClass
+            records to be defined.  Existing standard QClasses are
+            listed in the DNS specification."
+    REFERENCE
+            "RFC-1035 section 3.2.5."
+    SYNTAX  INTEGER (0..65535)
+
+DnsQType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d"
+    STATUS  current
+    DESCRIPTION
+            "This data type is used to represent the QType values
+            which appear in Resource Records in the DNS.  A 16-bit
+            unsigned integer is used to allow room for new QType
+            records to be defined.  Existing standard QTypes are
+            listed in the DNS specification."
+    REFERENCE
+            "RFC-1035 section 3.2.3."
+    SYNTAX  INTEGER (0..65535)
+
+DnsTime ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "4d"
+    STATUS  current
+    DESCRIPTION
+            "DnsTime values are 32-bit unsigned integers which
+            measure time in seconds."
+    REFERENCE
+            "RFC-1035."
+    SYNTAX  Gauge32
+
+DnsOpCode ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "This textual convention is used to represent the DNS
+            OPCODE values used in the header section of DNS
+            messages.  Existing standard OPCODE values are listed in
+            the DNS specifications."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    SYNTAX  INTEGER (0..15)
+
+DnsRespCode ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "This data type is used to represent the DNS RCODE value
+            in DNS response messages.  Existing standard RCODE
+            values are listed in the DNS specifications."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    SYNTAX  INTEGER (0..15)
+
+-- Server Configuration Group
+
+dnsServConfigImplementIdent OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The implementation identification string for the DNS
+            server software in use on the system, for example;
+            `FNS-2.1'"
+    ::= { dnsServConfig 1 }
+
+dnsServConfigRecurs  OBJECT-TYPE
+    SYNTAX      INTEGER { available(1),
+                          restricted(2),
+                          unavailable(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This represents the recursion services offered by this
+            name server.  The values that can be read or written
+            are:
+
+            available(1) - performs recursion on requests from
+            clients.
+
+            restricted(2) - recursion is performed on requests only
+            from certain clients, for example; clients on an access
+            control list.
+
+            unavailable(3) - recursion is not available."
+     ::= { dnsServConfig 2 }
+
+dnsServConfigUpTime OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "If the server has a persistent state (e.g., a process),
+            this value will be the time elapsed since it started.
+            For software without persistant state, this value will
+            be zero."
+    ::= { dnsServConfig 3 }
+
+dnsServConfigResetTime OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "If the server has a persistent state (e.g., a process)
+            and supports a `reset' operation (e.g., can be told to
+            re-read configuration files), this value will be the
+            time elapsed since the last time the name server was
+            `reset.'  For software that does not have persistence or
+            does not support a `reset' operation, this value will be
+            zero."
+    ::= { dnsServConfig 4 }
+
+dnsServConfigReset OBJECT-TYPE
+    SYNTAX      INTEGER { other(1),
+                          reset(2),
+                          initializing(3),
+                          running(4) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Status/action object to reinitialize any persistant name
+            server state.  When set to reset(2), any persistant
+            name server state (such as a process) is reinitialized as
+            if the name server had just been started.  This value
+            will never be returned by a read operation.  When read,
+            one of the following values will be returned:
+                other(1) - server in some unknown state;
+                initializing(3) - server (re)initializing;
+                running(4) - server currently running."
+    ::= { dnsServConfig 5 }
+
+-- Server Counter Group
+
+dnsServCounterAuthAns OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries which were authoritatively answered."
+    ::= { dnsServCounter 2 }
+
+dnsServCounterAuthNoNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries for which `authoritative no such name'
+            responses were made."
+    ::= { dnsServCounter 3 }
+
+dnsServCounterAuthNoDataResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries for which `authoritative no such data'
+            (empty answer) responses were made."
+    ::= { dnsServCounter 4 }
+
+dnsServCounterNonAuthDatas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries which were non-authoritatively
+            answered (cached data)."
+    ::= { dnsServCounter 5 }
+
+dnsServCounterNonAuthNoDatas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries which were non-authoritatively
+            answered with no data (empty answer)."
+    ::= { dnsServCounter 6 }
+
+dnsServCounterReferrals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests that were referred to other servers."
+    ::= { dnsServCounter 7 }
+
+dnsServCounterErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed that were
+            answered with errors (RCODE values other than 0 and 3)."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    ::= { dnsServCounter 8 }
+
+dnsServCounterRelNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests received by the server for names that
+            are only 1 label long (text form - no internal dots)."
+    ::= { dnsServCounter 9 }
+
+dnsServCounterReqRefusals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of DNS requests refused by the server."
+    ::= { dnsServCounter 10 }
+
+dnsServCounterReqUnparses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests received which were unparseable."
+    ::= { dnsServCounter 11 }
+
+dnsServCounterOtherErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests which were aborted for other (local)
+            server errors."
+    ::= { dnsServCounter 12 }
+
+-- DNS Server Counter Table
+
+dnsServCounterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsServCounterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Counter information broken down by DNS class and type."
+    ::= { dnsServCounter 13 }
+
+dnsServCounterEntry OBJECT-TYPE
+    SYNTAX      DnsServCounterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains count information for each DNS class
+
+            and type value known to the server.  The index allows
+            management software to to create indices to the table to
+            get the specific information desired, e.g., number of
+            queries over UDP for records with type value `A' which
+            came to this server.  In order to prevent an
+            uncontrolled expansion of rows in the table; if
+            dnsServCounterRequests is 0 and dnsServCounterResponses
+            is 0, then the row does not exist and `no such' is
+            returned when the agent is queried for such instances."
+    INDEX     { dnsServCounterOpCode,
+                dnsServCounterQClass,
+                dnsServCounterQType,
+                dnsServCounterTransport }
+    ::= { dnsServCounterTable 1 }
+
+DnsServCounterEntry ::=
+    SEQUENCE {
+        dnsServCounterOpCode
+            DnsOpCode,
+        dnsServCounterQClass
+            DnsClass,
+        dnsServCounterQType
+            DnsType,
+        dnsServCounterTransport
+            INTEGER,
+        dnsServCounterRequests
+            Counter32,
+        dnsServCounterResponses
+            Counter32
+        }
+
+dnsServCounterOpCode OBJECT-TYPE
+    SYNTAX      DnsOpCode
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The DNS OPCODE being counted in this row of the table."
+    ::= { dnsServCounterEntry 1 }
+
+dnsServCounterQClass OBJECT-TYPE
+    SYNTAX      DnsClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The class of record being counted in this row of the
+            table."
+    ::= { dnsServCounterEntry 2 }
+
+dnsServCounterQType OBJECT-TYPE
+    SYNTAX      DnsType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The type of record which is being counted in this row in
+            the table."
+    ::= { dnsServCounterEntry 3 }
+
+dnsServCounterTransport OBJECT-TYPE
+    SYNTAX      INTEGER { udp(1), tcp(2), other(3) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A value of udp(1) indicates that the queries reported on
+            this row were sent using UDP.
+
+            A value of tcp(2) indicates that the queries reported on
+            this row were sent using TCP.
+
+            A value of other(3) indicates that the queries reported
+            on this row were sent using a transport that was neither
+            TCP nor UDP."
+    ::= { dnsServCounterEntry 4 }
+
+dnsServCounterRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests (queries) that have been recorded in
+            this row of the table."
+    ::= { dnsServCounterEntry 5 }
+
+dnsServCounterResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of responses made by the server since
+            initialization for the kind of query identified on this
+            row of the table."
+    ::= { dnsServCounterEntry 6 }
+
+-- Server Optional Counter Group
+
+-- The Server Optional Counter Group is intended for those systems
+-- which make distinctions between the different sources of the DNS
+-- queries as defined below.
+--
+-- Objects in this group are implemented on servers which distinguish
+-- between queries which originate from the same host as the server,
+-- queries from one of an arbitrary group of hosts that are on an
+-- access list defined by the server, and queries from hosts that do
+-- not fit either of these descriptions.
+--
+-- The objects found in the Server Counter group are totals.  Thus if
+-- one wanted to identify, for example, the number of queries from
+-- `remote' hosts which have been given authoritative answers, one
+-- would subtract the current values of ServOptCounterFriendsAuthAns
+-- and ServOptCounterSelfAuthAns from servCounterAuthAns.
+--
+-- The purpose of these distinctions is to allow for implementations
+-- to group queries and responses on this basis.  One way in which
+-- servers may make these distinctions is by looking at the source IP
+-- address of the DNS query.  If the source of the query is `your
+-- own' then the query should be counted as `yourself' (local host).
+-- If the source of the query matches an `access list,' the query
+-- came from a friend.  What constitutes an `access list' is
+-- implementation dependent and could be as simple as a rule that all
+-- hosts on the same IP network as the DNS server are classed
+-- `friends.'
+--
+-- In order to avoid double counting, the following rules apply:
+--
+-- 1. No host is in more than one of the three groups defined above.
+--
+-- 2. All queries from the local host are always counted in the
+--    `yourself' group regardless of what the access list, if any,
+--    says.
+--
+-- 3. The access list should not define `your friends' in such a way
+--    that it includes all hosts.   That is, not everybody is your
+--    `friend.'
+
+dnsServOptCounterSelfAuthAns OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from a resolver on the same host for which
+
+            there has been an authoritative answer."
+    ::= { dnsServOptCounter 1 }
+
+dnsServOptCounterSelfAuthNoNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from a resolver on the same host for which
+            there has been an authoritative no such name answer
+            given."
+    ::= { dnsServOptCounter 2 }
+
+dnsServOptCounterSelfAuthNoDataResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from a resolver on the same host for which
+            there has been an authoritative no such data answer
+            (empty answer) made."
+    ::= { dnsServOptCounter 3 }
+
+dnsServOptCounterSelfNonAuthDatas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from a resolver on the same host for which a
+            non-authoritative answer (cached data) was made."
+    ::= { dnsServOptCounter 4 }
+
+dnsServOptCounterSelfNonAuthNoDatas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from a resolver on the same host for which a
+            `non-authoritative, no such data' response was made
+            (empty answer)."
+    ::= { dnsServOptCounter 5 }
+
+dnsServOptCounterSelfReferrals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries the server has processed which
+            originated from a resolver on the same host and were
+            referred to other servers."
+    ::= { dnsServOptCounter 6 }
+
+dnsServOptCounterSelfErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from a resolver on the same host which have
+            been answered with errors (RCODEs other than 0 and 3)."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    ::= { dnsServOptCounter 7 }
+
+dnsServOptCounterSelfRelNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests received for names that are only 1
+            label long (text form - no internal dots) the server has
+            processed which originated from a resolver on the same
+            host."
+    ::= { dnsServOptCounter 8 }
+
+dnsServOptCounterSelfReqRefusals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of DNS requests refused by the server which
+            originated from a resolver on the same host."
+    ::= { dnsServOptCounter 9 }
+
+dnsServOptCounterSelfReqUnparses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests received which were unparseable and
+            which originated from a resolver on the same host."
+    ::= { dnsServOptCounter 10 }
+
+dnsServOptCounterSelfOtherErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests which were aborted for other (local)
+            server errors and which originated on the same host."
+    ::= { dnsServOptCounter 11 }
+
+dnsServOptCounterFriendsAuthAns OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries originating from friends which were
+            authoritatively answered.  The definition of friends is
+            a locally defined matter."
+    ::= { dnsServOptCounter 12 }
+
+dnsServOptCounterFriendsAuthNoNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries originating from friends, for which
+            authoritative `no such name' responses were made.  The
+            definition of friends is a locally defined matter."
+    ::= { dnsServOptCounter 13 }
+
+dnsServOptCounterFriendsAuthNoDataResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries originating from friends for which
+            authoritative no such data (empty answer) responses were
+            made.  The definition of friends is a locally defined
+            matter."
+    ::= { dnsServOptCounter 14 }
+
+dnsServOptCounterFriendsNonAuthDatas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries originating from friends which were
+            non-authoritatively answered (cached data). The
+            definition of friends is a locally defined matter."
+    ::= { dnsServOptCounter 15 }
+
+dnsServOptCounterFriendsNonAuthNoDatas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of queries originating from friends which were
+            non-authoritatively answered with no such data (empty
+            answer)."
+    ::= { dnsServOptCounter 16 }
+
+dnsServOptCounterFriendsReferrals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests which originated from friends that
+            were referred to other servers.  The definition of
+            friends is a locally defined matter."
+    ::= { dnsServOptCounter 17 }
+
+dnsServOptCounterFriendsErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests the server has processed which
+            originated from friends and were answered with errors
+            (RCODE values other than 0 and 3).  The definition of
+            friends is a locally defined matter."
+    REFERENCE
+            "RFC-1035 section 4.1.1."
+    ::= { dnsServOptCounter 18 }
+
+dnsServOptCounterFriendsRelNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests received for names from friends that
+            are only 1 label long (text form - no internal dots) the
+            server has processed."
+    ::= { dnsServOptCounter 19 }
+
+dnsServOptCounterFriendsReqRefusals OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of DNS requests refused by the server which were
+            received from `friends'."
+    ::= { dnsServOptCounter 20 }
+
+dnsServOptCounterFriendsReqUnparses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests received which were unparseable and
+            which originated from `friends'."
+    ::= { dnsServOptCounter 21 }
+
+dnsServOptCounterFriendsOtherErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of requests which were aborted for other (local)
+            server errors and which originated from `friends'."
+    ::= { dnsServOptCounter 22 }
+
+-- Server Zone Group
+
+-- DNS Management Zone Configuration Table
+
+-- This table contains zone configuration information.
+
+dnsServZoneTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsServZoneEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of zones for which this name server provides
+            information.  Each of the zones may be loaded from stable
+            storage via an implementation-specific mechanism or may
+            be obtained from another name server via a zone transfer.
+
+            If name server doesn't load any zones, this table is
+            empty."
+    ::= { dnsServZone 1 }
+
+dnsServZoneEntry OBJECT-TYPE
+    SYNTAX      DnsServZoneEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the name server zone table.  New rows may be
+            added either via SNMP or by the name server itself."
+    INDEX     { dnsServZoneName,
+                dnsServZoneClass }
+    ::= { dnsServZoneTable 1 }
+
+DnsServZoneEntry ::=
+    SEQUENCE {
+        dnsServZoneName
+            DnsNameAsIndex,
+        dnsServZoneClass
+            DnsClass,
+        dnsServZoneLastReloadSuccess
+            DnsTime,
+        dnsServZoneLastReloadAttempt
+            DnsTime,
+        dnsServZoneLastSourceAttempt
+            IpAddress,
+        dnsServZoneStatus
+            RowStatus,
+        dnsServZoneSerial
+            Counter32,
+        dnsServZoneCurrent
+            TruthValue,
+        dnsServZoneLastSourceSuccess
+            IpAddress
+    }
+
+dnsServZoneName OBJECT-TYPE
+    SYNTAX      DnsNameAsIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS name of the zone described by this row of the table.
+            This is the owner name of the SOA RR that defines the
+            top of the zone. This is name is in uppercase:
+            characters 'a' through 'z' are mapped to 'A' through 'Z'
+            in order to make the lexical ordering useful."
+    ::= { dnsServZoneEntry 1 }
+
+dnsServZoneClass OBJECT-TYPE
+    SYNTAX      DnsClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS class of the RRs in this zone."
+    ::= { dnsServZoneEntry 2 }
+
+dnsServZoneLastReloadSuccess OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Elapsed time in seconds since last successful reload of
+            this zone."
+    ::= { dnsServZoneEntry 3 }
+
+dnsServZoneLastReloadAttempt OBJECT-TYPE
+    SYNTAX      DnsTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Elapsed time in seconds since last attempted reload of
+            this zone."
+    ::= { dnsServZoneEntry 4 }
+
+dnsServZoneLastSourceAttempt OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "IP address of host from which most recent zone transfer
+            of this zone was attempted.  This value should match the
+            value of dnsServZoneSourceSuccess if the attempt was
+            succcessful.  If zone transfer has not been attempted
+            within the memory of this name server, this value should
+            be 0.0.0.0."
+    ::= { dnsServZoneEntry 5 }
+
+dnsServZoneStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of the information represented in this row of
+            the table."
+    ::= { dnsServZoneEntry 6 }
+
+dnsServZoneSerial OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Zone serial number (from the SOA RR) of the zone
+
+            represented by this row of the table.  If the zone has
+            not been successfully loaded within the memory of this
+            name server, the value of this variable is zero."
+    ::= { dnsServZoneEntry 7 }
+
+dnsServZoneCurrent OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Whether the server's copy of the zone represented by
+            this row of the table is currently valid.  If the zone
+            has never been successfully loaded or has expired since
+            it was last succesfully loaded, this variable will have
+            the value false(2), otherwise this variable will have
+            the value true(1)."
+    ::= { dnsServZoneEntry 8 }
+
+dnsServZoneLastSourceSuccess OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "IP address of host which was the source of the most
+            recent successful zone transfer for this zone.  If
+            unknown (e.g., zone has never been successfully
+            transfered) or irrelevant (e.g., zone was loaded from
+            stable storage), this value should be 0.0.0.0."
+    ::= { dnsServZoneEntry 9 }
+
+-- DNS Zone Source Table
+
+dnsServZoneSrcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DnsServZoneSrcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table is a list of IP addresses from which the
+            server will attempt to load zone information using DNS
+            zone transfer operations.  A reload may occur due to SNMP
+            operations that create a row in dnsServZoneTable or a
+            SET to object dnsServZoneReload.  This table is only
+            used when the zone is loaded via zone transfer."
+    ::= { dnsServZone 2 }
+
+dnsServZoneSrcEntry OBJECT-TYPE
+    SYNTAX      DnsServZoneSrcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the name server zone source table."
+    INDEX     { dnsServZoneSrcName,
+                dnsServZoneSrcClass,
+                dnsServZoneSrcAddr }
+    ::= { dnsServZoneSrcTable 1 }
+
+DnsServZoneSrcEntry ::=
+    SEQUENCE {
+        dnsServZoneSrcName
+            DnsNameAsIndex,
+        dnsServZoneSrcClass
+            DnsClass,
+        dnsServZoneSrcAddr
+            IpAddress,
+        dnsServZoneSrcStatus
+            RowStatus
+    }
+
+dnsServZoneSrcName OBJECT-TYPE
+    SYNTAX      DnsNameAsIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS name of the zone to which this entry applies."
+    ::= { dnsServZoneSrcEntry 1 }
+
+dnsServZoneSrcClass OBJECT-TYPE
+    SYNTAX      DnsClass
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "DNS class of zone to which this entry applies."
+    ::= { dnsServZoneSrcEntry 2 }
+
+dnsServZoneSrcAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "IP address of name server host from which this zone
+            might be obtainable."
+    ::= { dnsServZoneSrcEntry 3 }
+
+dnsServZoneSrcStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of the information represented in this row of
+            the table."
+    ::= { dnsServZoneSrcEntry 4 }
+
+-- SNMPv2 groups.
+
+dnsServMIBGroups        OBJECT IDENTIFIER ::= { dnsServMIB 2 }
+
+dnsServConfigGroup OBJECT-GROUP
+    OBJECTS   { dnsServConfigImplementIdent,
+                dnsServConfigRecurs,
+                dnsServConfigUpTime,
+                dnsServConfigResetTime,
+                dnsServConfigReset }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing basic configuration
+            control of a DNS name server."
+    ::= { dnsServMIBGroups 1 }
+
+dnsServCounterGroup OBJECT-GROUP
+    OBJECTS   { dnsServCounterAuthAns,
+                dnsServCounterAuthNoNames,
+                dnsServCounterAuthNoDataResps,
+                dnsServCounterNonAuthDatas,
+                dnsServCounterNonAuthNoDatas,
+                dnsServCounterReferrals,
+                dnsServCounterErrors,
+                dnsServCounterRelNames,
+                dnsServCounterReqRefusals,
+                dnsServCounterReqUnparses,
+                dnsServCounterOtherErrors,
+                dnsServCounterOpCode,
+                dnsServCounterQClass,
+                dnsServCounterQType,
+                dnsServCounterTransport,
+                dnsServCounterRequests,
+                dnsServCounterResponses }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing basic instrumentation
+            of a DNS name server."
+    ::= { dnsServMIBGroups 2 }
+
+dnsServOptCounterGroup OBJECT-GROUP
+    OBJECTS   { dnsServOptCounterSelfAuthAns,
+                dnsServOptCounterSelfAuthNoNames,
+                dnsServOptCounterSelfAuthNoDataResps,
+                dnsServOptCounterSelfNonAuthDatas,
+                dnsServOptCounterSelfNonAuthNoDatas,
+                dnsServOptCounterSelfReferrals,
+                dnsServOptCounterSelfErrors,
+                dnsServOptCounterSelfRelNames,
+                dnsServOptCounterSelfReqRefusals,
+                dnsServOptCounterSelfReqUnparses,
+                dnsServOptCounterSelfOtherErrors,
+                dnsServOptCounterFriendsAuthAns,
+                dnsServOptCounterFriendsAuthNoNames,
+                dnsServOptCounterFriendsAuthNoDataResps,
+                dnsServOptCounterFriendsNonAuthDatas,
+                dnsServOptCounterFriendsNonAuthNoDatas,
+                dnsServOptCounterFriendsReferrals,
+                dnsServOptCounterFriendsErrors,
+                dnsServOptCounterFriendsRelNames,
+                dnsServOptCounterFriendsReqRefusals,
+                dnsServOptCounterFriendsReqUnparses,
+                dnsServOptCounterFriendsOtherErrors }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing extended
+            instrumentation of a DNS name server."
+    ::= { dnsServMIBGroups 3 }
+
+dnsServZoneGroup OBJECT-GROUP
+    OBJECTS   { dnsServZoneName,
+                dnsServZoneClass,
+                dnsServZoneLastReloadSuccess,
+                dnsServZoneLastReloadAttempt,
+                dnsServZoneLastSourceAttempt,
+                dnsServZoneLastSourceSuccess,
+                dnsServZoneStatus,
+                dnsServZoneSerial,
+                dnsServZoneCurrent,
+                dnsServZoneSrcName,
+                dnsServZoneSrcClass,
+                dnsServZoneSrcAddr,
+                dnsServZoneSrcStatus }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects providing configuration control
+            of a DNS name server which loads authoritative zones."
+    ::= { dnsServMIBGroups 4 }
+
+-- Compliances.
+
+dnsServMIBCompliances OBJECT IDENTIFIER ::= { dnsServMIB 3 }
+
+dnsServMIBCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+            "The compliance statement for agents implementing the DNS
+            name server MIB extensions."
+    MODULE -- This MIB module
+        MANDATORY-GROUPS { dnsServConfigGroup, dnsServCounterGroup }
+        GROUP   dnsServOptCounterGroup
+        DESCRIPTION
+            "The server optional counter group is unconditionally
+            optional."
+        GROUP   dnsServZoneGroup
+        DESCRIPTION
+            "The server zone group is mandatory for any name server
+            that acts as an authoritative server for any DNS zone."
+        OBJECT  dnsServConfigRecurs
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+        OBJECT  dnsServConfigReset
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "This object need not be writable."
+    ::= { dnsServMIBCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/DOCS-BPI-MIB.mib b/snmp_builder/mibs/DOCS-BPI-MIB.mib
new file mode 100644
index 0000000..5c2bb59
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-BPI-MIB.mib
@@ -0,0 +1,1569 @@
+DOCS-BPI-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY, OBJECT-TYPE,
+Integer32, Counter32, IpAddress
+FROM SNMPv2-SMI
+DisplayString, MacAddress, RowStatus, TruthValue, DateAndTime
+FROM SNMPv2-TC
+OBJECT-GROUP, MODULE-COMPLIANCE
+FROM SNMPv2-CONF
+ifIndex
+FROM IF-MIB
+docsIfMib, docsIfCmServiceId, docsIfCmtsServiceId
+FROM DOCS-IF-MIB
+;
+
+docsBpiMIB      MODULE-IDENTITY
+LAST-UPDATED "200103130000Z"
+ORGANIZATION "IETF IPCDN Working Group"
+CONTACT-INFO "Rich Woundy
+              Postal: Cisco Systems
+                      250 Apollo Drive
+                      Chelmsford, MA 01824 U.S.A.
+              Tel: +1 978 244 8000
+              E-mail: rwoundy@cisco.com
+
+              IETF IPCDN Working Group
+              General Discussion: ipcdn@ietf.org
+              Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+              Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+              Co-chairs: Richard Woundy, rwoundy@cisco.com
+                         Andrew Valentine, a.valentine@eu.hns.com"
+DESCRIPTION
+"This is the MIB Module for the DOCSIS Baseline Privacy Interface
+(BPI) at cable modems (CMs) and cable modem termination systems
+(CMTSs). CableLabs requires the implementation of this MIB in
+DOCSIS 1.0 cable modems that implement the Baseline Privacy
+Interface, as a prerequisite for DOCSIS 1.0 certification."
+
+REVISION "200103130000Z"
+DESCRIPTION
+"Version published as RFC 3083."
+
+REVISION "200011031930Z"
+DESCRIPTION
+"Modified by Richard Woundy to fix problems identified by the MIB
+
+doctor. I marked docsBpiCmtsDefaultAuthGraceTime and
+docsBpiCmtsDefaultTEKGraceTime as obsolete objects, to prevent OID
+reassignment. Several object descriptions were also corrected."
+
+REVISION "200002161930Z"
+DESCRIPTION
+"Initial version.
+CableLabs requires the implementation of this MIB in certified DOCSIS
+1.0 cable modems implementing the Baseline Privacy Interface, per
+DOCSIS 1.0 engineering change notice oss-n-99027."
+::= { docsIfMib 5 }
+
+docsBpiMIBObjects  OBJECT IDENTIFIER ::= { docsBpiMIB 1 }
+
+-- Cable Modem Group
+
+docsBpiCmObjects OBJECT IDENTIFIER ::= { docsBpiMIBObjects 1 }
+
+--
+-- The BPI base and authorization table for CMs, indexed by ifIndex
+--
+
+docsBpiCmBaseTable      OBJECT-TYPE
+SYNTAX                  SEQUENCE OF     DocsBpiCmBaseEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"This table describes the basic and authorization-related Baseline
+Privacy attributes of each CM MAC interface."
+::= { docsBpiCmObjects 1 }
+
+docsBpiCmBaseEntry      OBJECT-TYPE
+SYNTAX                  DocsBpiCmBaseEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"Each entry contains objects describing attributes of one CM MAC
+interface. An entry in this table exists for each ifEntry with an
+ifType of docsCableMaclayer(127)."
+INDEX                   { ifIndex }
+::= { docsBpiCmBaseTable 1 }
+
+DocsBpiCmBaseEntry ::= SEQUENCE {
+docsBpiCmPrivacyEnable                  TruthValue,
+docsBpiCmPublicKey                      OCTET STRING,
+docsBpiCmAuthState                      INTEGER,
+docsBpiCmAuthKeySequenceNumber          Integer32,
+docsBpiCmAuthExpires                    DateAndTime,
+docsBpiCmAuthReset                      TruthValue,
+docsBpiCmAuthGraceTime                  Integer32,
+docsBpiCmTEKGraceTime                   Integer32,
+docsBpiCmAuthWaitTimeout                Integer32,
+docsBpiCmReauthWaitTimeout              Integer32,
+docsBpiCmOpWaitTimeout                  Integer32,
+docsBpiCmRekeyWaitTimeout               Integer32,
+docsBpiCmAuthRejectWaitTimeout          Integer32,
+docsBpiCmAuthRequests                   Counter32,
+docsBpiCmAuthReplies                    Counter32,
+docsBpiCmAuthRejects                    Counter32,
+docsBpiCmAuthInvalids                   Counter32,
+docsBpiCmAuthRejectErrorCode            INTEGER,
+docsBpiCmAuthRejectErrorString          DisplayString,
+docsBpiCmAuthInvalidErrorCode           INTEGER,
+docsBpiCmAuthInvalidErrorString         DisplayString
+}
+
+docsBpiCmPrivacyEnable  OBJECT-TYPE
+SYNTAX                  TruthValue
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"This object identifies whether this CM is provisioned to run
+Baseline Privacy. This is analogous to the presence (or absence)
+of the Baseline Privacy Configuration Setting option. The status
+of each individual SID with respect to Baseline Privacy is
+captured in the docsBpiCmTEKPrivacyEnable object."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1."
+::= { docsBpiCmBaseEntry 1 }
+
+docsBpiCmPublicKey      OBJECT-TYPE
+SYNTAX                  OCTET STRING (SIZE (74 | 106 | 140 | 270))
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is a DER-encoded RSAPublicKey ASN.1 type
+string, as defined in the RSA Encryption Standard (PKCS #1) [22],
+corresponding to the public key of the CM. The 74, 106, 140, and
+270 byte key encoding lengths correspond to 512 bit, 768 bit, 1024
+bit, and 2048 public moduli respectively."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.2.4."
+::= { docsBpiCmBaseEntry 2 }
+
+docsBpiCmAuthState      OBJECT-TYPE
+SYNTAX                  INTEGER {
+
+                                authWait(2),
+                                authorized(3),
+                                reauthWait(4),
+                                authRejectWait(5)
+                        }
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the state of the CM authorization
+FSM.  The start state indicates that FSM is in its initial state."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.1.2.1."
+::= { docsBpiCmBaseEntry 3 }
+
+docsBpiCmAuthKeySequenceNumber  OBJECT-TYPE
+SYNTAX                          Integer32 (0..15)
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the authorization key sequence number
+for this FSM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.2
+and 4.2.2.10."
+::= { docsBpiCmBaseEntry 4 }
+
+docsBpiCmAuthExpires    OBJECT-TYPE
+SYNTAX                  DateAndTime
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the actual clock time when the current
+authorization for this FSM expires. If the CM does not have an active
+authorization, then the value is of the expiration date and time of
+the last active authorization."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.2
+and 4.2.2.9."
+::= { docsBpiCmBaseEntry 5 }
+
+docsBpiCmAuthReset      OBJECT-TYPE
+SYNTAX                  TruthValue
+MAX-ACCESS              read-write
+STATUS                  current
+DESCRIPTION
+"Setting this object to TRUE generates a Reauthorize event in the
+authorization FSM. Reading this object always returns FALSE."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.1.2.3.4."
+::= { docsBpiCmBaseEntry 6 }
+
+docsBpiCmAuthGraceTime  OBJECT-TYPE
+SYNTAX                  Integer32 (1..1800)
+UNITS                   "seconds"
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the grace time for an authorization key.
+A CM is expected to start trying to get a new authorization key
+beginning AuthGraceTime seconds before the authorization key actually
+expires."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.3."
+::= { docsBpiCmBaseEntry 7 }
+
+docsBpiCmTEKGraceTime   OBJECT-TYPE
+SYNTAX                  Integer32 (1..1800)
+UNITS                   "seconds"
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the grace time for a TEK.  A CM is
+expected to start trying to get a new TEK beginning TEKGraceTime
+seconds before the TEK actually expires."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.6."
+::= { docsBpiCmBaseEntry 8 }
+
+docsBpiCmAuthWaitTimeout        OBJECT-TYPE
+SYNTAX                          Integer32 (1..30)
+UNITS                           "seconds"
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Authorize Wait Timeout."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.1."
+::= { docsBpiCmBaseEntry 9 }
+
+docsBpiCmReauthWaitTimeout      OBJECT-TYPE
+SYNTAX                          Integer32 (1..30)
+UNITS                           "seconds"
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Reauthorize Wait Timeout in seconds."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.2."
+::= { docsBpiCmBaseEntry 10 }
+
+docsBpiCmOpWaitTimeout  OBJECT-TYPE
+SYNTAX                  Integer32 (1..10)
+UNITS                   "seconds"
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the Operational Wait Timeout in seconds."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.4."
+::= { docsBpiCmBaseEntry 11 }
+
+docsBpiCmRekeyWaitTimeout       OBJECT-TYPE
+SYNTAX                          Integer32 (1..10)
+UNITS                           "seconds"
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Rekey Wait Timeout in seconds."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.5."
+::= { docsBpiCmBaseEntry 12 }
+
+docsBpiCmAuthRejectWaitTimeout  OBJECT-TYPE
+SYNTAX                          Integer32 (1..600)
+UNITS                           "seconds"
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Authorization Reject Wait Timeout in
+seconds."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.7."
+::= { docsBpiCmBaseEntry 13 }
+
+docsBpiCmAuthRequests   OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has
+transmitted an Authorization Request message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.1."
+::= { docsBpiCmBaseEntry 14 }
+
+docsBpiCmAuthReplies    OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has
+received an Authorization Reply message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.2."
+::= { docsBpiCmBaseEntry 15 }
+
+docsBpiCmAuthRejects    OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has
+received an Authorization Reject message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.3."
+::= { docsBpiCmBaseEntry 16 }
+
+docsBpiCmAuthInvalids   OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has
+received an Authorization Invalid message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.7."
+::= { docsBpiCmBaseEntry 17 }
+
+docsBpiCmAuthRejectErrorCode    OBJECT-TYPE
+SYNTAX                          INTEGER {
+                                        none(1),
+                                        unknown(2),
+                                        unauthorizedCm(3),
+                                        unauthorizedSid(4)
+                                }
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in most recent Authorization Reject message received by
+the CM.  This has value unknown(2) if the last Error-Code value was
+0, and none(1) if no Authorization Reject message has been received
+since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.3
+and 4.2.2.16."
+::= { docsBpiCmBaseEntry 18 }
+
+docsBpiCmAuthRejectErrorString  OBJECT-TYPE
+SYNTAX                          DisplayString (SIZE (0..128))
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Display-String in most recent
+Authorization Reject message received by the CM.  This is a zero
+length string if no Authorization Reject message has been received
+since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.3
+and 4.2.2.6."
+::= { docsBpiCmBaseEntry 19 }
+
+docsBpiCmAuthInvalidErrorCode   OBJECT-TYPE
+SYNTAX                  INTEGER {
+                                none(1),
+                                unknown(2),
+                                unauthorizedCm(3),
+                                unsolicited(5),
+                                invalidKeySequence(6),
+                                keyRequestAuthenticationFailure(7)
+                        }
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in most recent Authorization Invalid message received by
+the CM.  This has value unknown(2) if the last Error-Code value was
+0, and none(1) if no Authorization Invalid message has been received
+since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.7
+and 4.2.2.16."
+::= { docsBpiCmBaseEntry 20 }
+
+docsBpiCmAuthInvalidErrorString OBJECT-TYPE
+SYNTAX                          DisplayString (SIZE (0..128))
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Display-String in most recent
+Authorization Invalid message received by the CM.  This is a zero
+
+length string if no Authorization Invalid message has been received
+since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.7
+and 4.2.2.6."
+::= { docsBpiCmBaseEntry 21 }
+
+--
+-- The CM TEK Table, indexed by ifIndex and SID
+--
+
+docsBpiCmTEKTable       OBJECT-TYPE
+SYNTAX                  SEQUENCE OF     DocsBpiCmTEKEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"This table describes the attributes of each CM Traffic Encryption Key
+(TEK) association. The CM maintains (no more than) one TEK association
+per SID per CM MAC interface."
+::= { docsBpiCmObjects 2 }
+
+docsBpiCmTEKEntry       OBJECT-TYPE
+SYNTAX                  DocsBpiCmTEKEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"Each entry contains objects describing the TEK association attributes
+of one SID. The CM MUST create one entry per unicast SID, regardless
+of whether the SID was obtained from a Registration Response message,
+or from an Authorization Reply message."
+INDEX                   { ifIndex, docsIfCmServiceId }
+::= { docsBpiCmTEKTable 1 }
+
+DocsBpiCmTEKEntry ::= SEQUENCE {
+docsBpiCmTEKPrivacyEnable               TruthValue,
+docsBpiCmTEKState                       INTEGER,
+docsBpiCmTEKExpiresOld                  DateAndTime,
+docsBpiCmTEKExpiresNew                  DateAndTime,
+docsBpiCmTEKKeyRequests                 Counter32,
+docsBpiCmTEKKeyReplies                  Counter32,
+docsBpiCmTEKKeyRejects                  Counter32,
+docsBpiCmTEKInvalids                    Counter32,
+docsBpiCmTEKAuthPends                   Counter32,
+docsBpiCmTEKKeyRejectErrorCode          INTEGER,
+docsBpiCmTEKKeyRejectErrorString        DisplayString,
+docsBpiCmTEKInvalidErrorCode            INTEGER,
+docsBpiCmTEKInvalidErrorString          DisplayString
+}
+
+docsBpiCmTEKPrivacyEnable       OBJECT-TYPE
+SYNTAX                          TruthValue
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"This object identifies whether this SID is provisioned to run
+Baseline Privacy. This is analogous to enabling Baseline Privacy on
+a provisioned SID using the Class-of-Service Privacy Enable option.
+Baseline Privacy is not effectively enabled for any SID unless
+Baseline Privacy is enabled for the CM, which is managed via the
+docsBpiCmPrivacyEnable object."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.2."
+::= { docsBpiCmTEKEntry 1 }
+
+docsBpiCmTEKState       OBJECT-TYPE
+SYNTAX                  INTEGER {
+                                start(1),
+                                opWait(2),
+                                opReauthWait(3),
+                                operational(4),
+                                rekeyWait(5),
+                                rekeyReauthWait(6)
+                        }
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the state of the indicated TEK FSM.
+The start(1) state indicates that FSM is in its initial state."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.1.3.1."
+::= { docsBpiCmTEKEntry 2 }
+
+docsBpiCmTEKExpiresOld  OBJECT-TYPE
+SYNTAX                  DateAndTime
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the actual clock time for expiration
+of the immediate predecessor of the most recent TEK for this FSM.
+If this FSM has only one TEK, then the value is the time of activation
+of this FSM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.5 and
+4.2.2.9."
+::= { docsBpiCmTEKEntry 3 }
+
+docsBpiCmTEKExpiresNew  OBJECT-TYPE
+SYNTAX                  DateAndTime
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the actual clock time for expiration
+of the most recent TEK for this FSM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.5 and
+4.2.2.9."
+::= { docsBpiCmTEKEntry 4 }
+
+docsBpiCmTEKKeyRequests OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has transmitted
+a Key Request message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.4."
+::= { docsBpiCmTEKEntry 5 }
+
+docsBpiCmTEKKeyReplies  OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has received
+a Key Reply message, including a message whose authentication failed."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.5."
+::= { docsBpiCmTEKEntry 6 }
+
+docsBpiCmTEKKeyRejects  OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has received
+a Key Reject message, including a message whose authentication failed."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.6."
+::= { docsBpiCmTEKEntry 7 }
+
+docsBpiCmTEKInvalids    OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CM has received
+a TEK Invalid message, including a message whose authentication failed."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.8."
+::= { docsBpiCmTEKEntry 8 }
+
+docsBpiCmTEKAuthPends   OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times an Authorization
+Pending (Auth Pend) event occurred in this FSM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.1.3.3.3."
+::= { docsBpiCmTEKEntry 9 }
+
+docsBpiCmTEKKeyRejectErrorCode  OBJECT-TYPE
+SYNTAX                          INTEGER {
+                                        none(1),
+                                        unknown(2),
+                                        unauthorizedSid(4)
+                                }
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in most recent Key Reject message received by the CM. This
+has value unknown(2) if the last Error-Code value was 0, and none(1)
+if no Key Reject message has been received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.1.2.6
+and 4.2.2.16."
+::= { docsBpiCmTEKEntry 10 }
+
+docsBpiCmTEKKeyRejectErrorString        OBJECT-TYPE
+SYNTAX                                  DisplayString (SIZE (0..128))
+MAX-ACCESS                              read-only
+STATUS                                  current
+DESCRIPTION
+"The value of this object is the Display-String in most recent Key
+Reject message received by the CM. This is a zero length string if no
+Key Reject message has been received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.1.2.6
+and 4.2.2.6."
+::= { docsBpiCmTEKEntry 11 }
+
+docsBpiCmTEKInvalidErrorCode    OBJECT-TYPE
+SYNTAX                          INTEGER {
+                                        none(1),
+                                        unknown(2),
+                                        invalidKeySequence(6)
+                                }
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in most recent TEK Invalid message received by the CM.
+This has value unknown(2) if the last Error-Code value was 0, and
+none(1) if no TEK Invalid message has been received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.1.2.8
+and 4.2.2.16."
+::= { docsBpiCmTEKEntry 12 }
+
+docsBpiCmTEKInvalidErrorString  OBJECT-TYPE
+SYNTAX                          DisplayString (SIZE (0..128))
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Display-String in most recent TEK
+Invalid message received by the CM. This is a zero length string if
+no TEK Invalid message has been received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.1.2.8
+and 4.2.2.6."
+::= { docsBpiCmTEKEntry 13 }
+
+-- Cable Modem Termination System Group
+
+docsBpiCmtsObjects OBJECT IDENTIFIER ::= { docsBpiMIBObjects 2 }
+
+--
+-- The BPI base table for CMTSs, indexed by ifIndex
+--
+
+docsBpiCmtsBaseTable    OBJECT-TYPE
+SYNTAX                  SEQUENCE OF     DocsBpiCmtsBaseEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"This table describes the basic Baseline Privacy attributes of each
+CMTS MAC interface."
+::= { docsBpiCmtsObjects 1 }
+
+docsBpiCmtsBaseEntry    OBJECT-TYPE
+SYNTAX                  DocsBpiCmtsBaseEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"Each entry contains objects describing attributes of one CMTS MAC
+interface. An entry in this table exists for each ifEntry with an
+ifType of docsCableMaclayer(127)."
+INDEX                   { ifIndex }
+::= { docsBpiCmtsBaseTable 1 }
+
+DocsBpiCmtsBaseEntry ::= SEQUENCE {
+docsBpiCmtsDefaultAuthLifetime  Integer32,
+docsBpiCmtsDefaultTEKLifetime   Integer32,
+docsBpiCmtsDefaultAuthGraceTime Integer32,
+docsBpiCmtsDefaultTEKGraceTime  Integer32,
+docsBpiCmtsAuthRequests         Counter32,
+docsBpiCmtsAuthReplies          Counter32,
+docsBpiCmtsAuthRejects          Counter32,
+docsBpiCmtsAuthInvalids         Counter32
+}
+
+docsBpiCmtsDefaultAuthLifetime  OBJECT-TYPE
+SYNTAX                          Integer32 (1..6048000)
+UNITS                           "seconds"
+MAX-ACCESS                      read-write
+STATUS                          current
+DESCRIPTION
+"The value of this object is the default lifetime, in seconds, the
+CMTS assigns to a new authorization key."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.2."
+::= { docsBpiCmtsBaseEntry 1 }
+
+docsBpiCmtsDefaultTEKLifetime   OBJECT-TYPE
+SYNTAX                          Integer32 (1..604800)
+UNITS                           "seconds"
+MAX-ACCESS                      read-write
+STATUS                          current
+DESCRIPTION
+"The value of this object is the default lifetime, in seconds, the
+CMTS assigns to a new Traffic Encryption Key (TEK)."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.2."
+::= { docsBpiCmtsBaseEntry 2 }
+
+-- Note: the following two objects have been obsoleted from this MIB.
+
+docsBpiCmtsDefaultAuthGraceTime OBJECT-TYPE
+SYNTAX                          Integer32 (1..1800)
+UNITS                           "seconds"
+MAX-ACCESS                      read-write
+STATUS                          obsolete
+DESCRIPTION
+"This object was obsoleted because the provisioning system, not the CMTS,
+manages the authorization key grace time for DOCSIS CMs."
+::= { docsBpiCmtsBaseEntry 3 }
+
+docsBpiCmtsDefaultTEKGraceTime  OBJECT-TYPE
+SYNTAX                          Integer32 (1..1800)
+UNITS                           "seconds"
+MAX-ACCESS                      read-write
+STATUS                          obsolete
+DESCRIPTION
+"This object was obsoleted because the provisioning system, not the CMTS,
+manages the Traffic Encryption Key (TEK) grace time for DOCSIS CMs."
+::= { docsBpiCmtsBaseEntry 4 }
+
+docsBpiCmtsAuthRequests OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+received an Authorization Request message from any CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.1."
+::= { docsBpiCmtsBaseEntry 5 }
+
+docsBpiCmtsAuthReplies  OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted an Authorization Reply message to any CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.2."
+::= { docsBpiCmtsBaseEntry 6 }
+
+docsBpiCmtsAuthRejects  OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+
+transmitted an Authorization Reject message to any CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.3."
+::= { docsBpiCmtsBaseEntry 7 }
+
+docsBpiCmtsAuthInvalids OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted an Authorization Invalid message to any CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.7."
+::= { docsBpiCmtsBaseEntry 8 }
+
+--
+-- The CMTS Authorization Table, indexed by ifIndex and CM MAC address
+--
+
+docsBpiCmtsAuthTable    OBJECT-TYPE
+SYNTAX                  SEQUENCE OF     DocsBpiCmtsAuthEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"This table describes the attributes of each CM authorization
+association. The CMTS maintains one authorization association with
+each Baseline Privacy-enabled CM on each CMTS MAC interface."
+::= { docsBpiCmtsObjects 2 }
+
+docsBpiCmtsAuthEntry    OBJECT-TYPE
+SYNTAX                  DocsBpiCmtsAuthEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"Each entry contains objects describing attributes of one
+authorization association. The CMTS MUST create one entry per CM per
+MAC interface, based on the receipt of an Authorization Request
+message, and MUST not delete the entry before the CM authorization
+permanently expires."
+INDEX                   { ifIndex, docsBpiCmtsAuthCmMacAddress }
+::= { docsBpiCmtsAuthTable 1 }
+
+DocsBpiCmtsAuthEntry ::= SEQUENCE {
+docsBpiCmtsAuthCmMacAddress             MacAddress,
+docsBpiCmtsAuthCmPublicKey              OCTET STRING,
+docsBpiCmtsAuthCmKeySequenceNumber      Integer32,
+docsBpiCmtsAuthCmExpires                DateAndTime,
+docsBpiCmtsAuthCmLifetime               Integer32,
+docsBpiCmtsAuthCmGraceTime              Integer32,
+docsBpiCmtsAuthCmReset                  INTEGER,
+docsBpiCmtsAuthCmRequests               Counter32,
+docsBpiCmtsAuthCmReplies                Counter32,
+docsBpiCmtsAuthCmRejects                Counter32,
+docsBpiCmtsAuthCmInvalids               Counter32,
+docsBpiCmtsAuthRejectErrorCode          INTEGER,
+docsBpiCmtsAuthRejectErrorString        DisplayString,
+docsBpiCmtsAuthInvalidErrorCode         INTEGER,
+docsBpiCmtsAuthInvalidErrorString       DisplayString
+}
+
+docsBpiCmtsAuthCmMacAddress     OBJECT-TYPE
+SYNTAX                          MacAddress
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"The value of this object is the physical address of the CM to
+which the authorization association applies."
+::= { docsBpiCmtsAuthEntry 1 }
+
+docsBpiCmtsAuthCmPublicKey      OBJECT-TYPE
+SYNTAX                          OCTET STRING
+                                (SIZE (0 | 74 | 106 | 140 | 270))
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is a DER-encoded RSAPublicKey ASN.1 type
+string, as defined in the RSA Encryption Standard (PKCS #1) [22],
+corresponding to the public key of the CM. The 74, 106, 140, and
+270 byte key encoding lengths correspond to 512 bit, 768 bit, 1024
+bit, and 2048 public moduli respectively. This is a zero-length
+string if the CMTS does not retain the public key."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.2.4."
+::= { docsBpiCmtsAuthEntry 2 }
+
+docsBpiCmtsAuthCmKeySequenceNumber      OBJECT-TYPE
+SYNTAX                                  Integer32 (0..15)
+MAX-ACCESS                              read-only
+STATUS                                  current
+DESCRIPTION
+"The value of this object is the authorization key sequence number
+for this CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.2
+and 4.2.2.10."
+::= { docsBpiCmtsAuthEntry 3 }
+
+docsBpiCmtsAuthCmExpires        OBJECT-TYPE
+SYNTAX                          DateAndTime
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the actual clock time when the current
+authorization for this CM expires. If this CM does not have an
+active authorization, then the value is of the expiration date and
+time of the last active authorization."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.2
+and 4.2.2.9."
+::= { docsBpiCmtsAuthEntry 4 }
+
+docsBpiCmtsAuthCmLifetime       OBJECT-TYPE
+SYNTAX                          Integer32 (1..6048000)
+UNITS                           "seconds"
+MAX-ACCESS                      read-write
+STATUS                          current
+DESCRIPTION
+"The value of this object is the lifetime, in seconds, the CMTS
+assigns to an authorization key for this CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.2
+and Appendix A.2."
+::= { docsBpiCmtsAuthEntry 5 }
+
+docsBpiCmtsAuthCmGraceTime      OBJECT-TYPE
+SYNTAX                          Integer32 (1..1800)
+UNITS                           "seconds"
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the grace time for the authorization key
+in seconds.  The CM is expected to start trying to get a new
+authorization key beginning AuthGraceTime seconds before the
+authorization key actually expires."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.3."
+::= { docsBpiCmtsAuthEntry 6 }
+
+docsBpiCmtsAuthCmReset  OBJECT-TYPE
+SYNTAX                  INTEGER {
+                                noResetRequested(1),
+                                invalidateAuth(2),
+                                sendAuthInvalid(3),
+                                invalidateTeks(4)
+                        }
+MAX-ACCESS              read-write
+STATUS                  current
+DESCRIPTION
+"Setting this object to invalidateAuth(2) causes the CMTS to
+invalidate the current CM authorization key, but not to transmit an
+Authorization Invalid message nor to invalidate unicast TEKs.  Setting
+this object to sendAuthInvalid(3) causes the CMTS to invalidate the
+current CM authorization key, and to transmit an Authorization Invalid
+message to the CM, but not to invalidate unicast TEKs.  Setting this
+object to invalidateTeks(4) causes the CMTS to invalidate the current
+CM authorization key, to transmit an Authorization Invalid message to
+the CM, and to invalidate all unicast TEKs associated with this CM
+authorization. Reading this object returns the most-recently-set value
+of this object, or returns noResetRequested(1) if the object has not
+been set since the last CMTS reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.1.2.3.4,
+4.1.2.3.5, and 4.1.3.3.5."
+::= { docsBpiCmtsAuthEntry 7 }
+
+docsBpiCmtsAuthCmRequests       OBJECT-TYPE
+SYNTAX                          Counter32
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+received an Authorization Request message from this CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.1."
+::= { docsBpiCmtsAuthEntry 8 }
+
+docsBpiCmtsAuthCmReplies        OBJECT-TYPE
+SYNTAX                          Counter32
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted an Authorization Reply message to this CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.2."
+::= { docsBpiCmtsAuthEntry 9 }
+
+docsBpiCmtsAuthCmRejects        OBJECT-TYPE
+SYNTAX                          Counter32
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted an Authorization Reject message to this CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.3."
+::= { docsBpiCmtsAuthEntry 10 }
+
+docsBpiCmtsAuthCmInvalids       OBJECT-TYPE
+SYNTAX                          Counter32
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted an Authorization Invalid message to this CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.7."
+::= { docsBpiCmtsAuthEntry 11 }
+
+docsBpiCmtsAuthRejectErrorCode  OBJECT-TYPE
+SYNTAX                  INTEGER {
+                                none(1),
+                                unknown(2),
+                                unauthorizedCm(3),
+                                unauthorizedSid(4)
+                        }
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in most recent Authorization Reject message transmitted to
+the CM.  This has value unknown(2) if the last Error-Code value was
+0, and none(1) if no Authorization Reject message has been transmitted
+to the CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.3
+and 4.2.2.16."
+::= { docsBpiCmtsAuthEntry 12 }
+
+docsBpiCmtsAuthRejectErrorString        OBJECT-TYPE
+SYNTAX                                  DisplayString (SIZE (0..128))
+MAX-ACCESS                              read-only
+STATUS                                  current
+DESCRIPTION
+"The value of this object is the Display-String in most recent
+Authorization Reject message transmitted to the CM.  This is a
+zero length string if no Authorization Reject message has been
+transmitted to the CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.3
+and 4.2.2.6."
+::= { docsBpiCmtsAuthEntry 13 }
+
+docsBpiCmtsAuthInvalidErrorCode OBJECT-TYPE
+SYNTAX                  INTEGER {
+                                none(1),
+                                unknown(2),
+                                unauthorizedCm(3),
+                                unsolicited(5),
+                                invalidKeySequence(6),
+                                keyRequestAuthenticationFailure(7)
+                        }
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in most recent Authorization Invalid message transmitted
+to the CM.  This has value unknown(2) if the last Error-Code value was
+0, and none(1) if no Authorization Invalid message has been
+transmitted to the CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.7
+and 4.2.2.16."
+::= { docsBpiCmtsAuthEntry 14 }
+
+docsBpiCmtsAuthInvalidErrorString       OBJECT-TYPE
+SYNTAX                                  DisplayString (SIZE (0..128))
+MAX-ACCESS                              read-only
+STATUS                                  current
+DESCRIPTION
+"The value of this object is the Display-String in most recent
+Authorization Invalid message transmitted to the CM.  This is a
+zero length string if no Authorization Invalid message has been
+transmitted to the CM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.7
+and 4.2.2.6."
+::= { docsBpiCmtsAuthEntry 15 }
+
+--
+-- The CMTS TEK Table, indexed by ifIndex and SID
+--
+
+docsBpiCmtsTEKTable     OBJECT-TYPE
+SYNTAX                  SEQUENCE OF     DocsBpiCmtsTEKEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"This table describes the attributes of each CM Traffic Encryption
+Key (TEK) association. The CMTS maintains one TEK association per BPI
+SID on each CMTS MAC interface."
+::= { docsBpiCmtsObjects 3 }
+
+docsBpiCmtsTEKEntry     OBJECT-TYPE
+SYNTAX                  DocsBpiCmtsTEKEntry
+MAX-ACCESS              not-accessible
+STATUS                  current
+DESCRIPTION
+"Each entry contains objects describing attributes of one TEK
+association on a particular CMTS MAC interface. The CMTS MUST create
+one entry per SID per MAC interface, based on the receipt of an
+Key Request message, and MUST not delete the entry before the CM
+authorization for the SID permanently expires."
+INDEX                   { ifIndex, docsIfCmtsServiceId }
+::= { docsBpiCmtsTEKTable 1 }
+
+DocsBpiCmtsTEKEntry ::= SEQUENCE {
+docsBpiCmtsTEKLifetime                  Integer32,
+docsBpiCmtsTEKGraceTime                 Integer32,
+docsBpiCmtsTEKExpiresOld                DateAndTime,
+docsBpiCmtsTEKExpiresNew                DateAndTime,
+docsBpiCmtsTEKReset                     TruthValue,
+docsBpiCmtsKeyRequests                  Counter32,
+docsBpiCmtsKeyReplies                   Counter32,
+docsBpiCmtsKeyRejects                   Counter32,
+docsBpiCmtsTEKInvalids                  Counter32,
+docsBpiCmtsKeyRejectErrorCode           INTEGER,
+docsBpiCmtsKeyRejectErrorString         DisplayString,
+docsBpiCmtsTEKInvalidErrorCode          INTEGER,
+docsBpiCmtsTEKInvalidErrorString        DisplayString
+}
+
+docsBpiCmtsTEKLifetime  OBJECT-TYPE
+SYNTAX                  Integer32 (1..604800)
+UNITS                   "seconds"
+MAX-ACCESS              read-write
+STATUS                  current
+DESCRIPTION
+"The value of this object is the lifetime, in seconds, the CMTS assigns
+to keys for this TEK association."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.5
+and Appendix A.2."
+::= { docsBpiCmtsTEKEntry 1 }
+
+docsBpiCmtsTEKGraceTime OBJECT-TYPE
+SYNTAX                  Integer32 (1..1800)
+UNITS                   "seconds"
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the grace time for the TEK in seconds.
+The CM is expected to start trying to get a new TEK beginning
+TEKGraceTime seconds before the TEK actually expires."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Appendix A.1.1.1.6."
+::= { docsBpiCmtsTEKEntry 2 }
+
+docsBpiCmtsTEKExpiresOld        OBJECT-TYPE
+SYNTAX                  DateAndTime
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the actual clock time for expiration
+of the immediate predecessor of the most recent TEK for this FSM.
+If this FSM has only one TEK, then the value is the time of activation
+of this FSM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.5
+and 4.2.2.9."
+::= { docsBpiCmtsTEKEntry 3 }
+
+docsBpiCmtsTEKExpiresNew        OBJECT-TYPE
+SYNTAX                          DateAndTime
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the actual clock time for expiration
+of the most recent TEK for this FSM."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.5
+and 4.2.2.9."
+::= { docsBpiCmtsTEKEntry 4 }
+
+docsBpiCmtsTEKReset     OBJECT-TYPE
+SYNTAX                  TruthValue
+MAX-ACCESS              read-write
+STATUS                  current
+DESCRIPTION
+"Setting this object to TRUE causes the CMTS to invalidate the current
+active TEK(s) (plural due to key transition periods), and to generate
+a new TEK for the associated SID; the CMTS MAY also generate an
+unsolicited TEK Invalid message, to optimize the TEK synchronization
+
+between the CMTS and the CM. Reading this object always returns
+FALSE."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.1.3.3.5."
+::= { docsBpiCmtsTEKEntry 5 }
+
+docsBpiCmtsKeyRequests  OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+received a Key Request message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.4."
+::= { docsBpiCmtsTEKEntry 6 }
+
+docsBpiCmtsKeyReplies   OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted a Key Reply message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.5."
+::= { docsBpiCmtsTEKEntry 7 }
+
+docsBpiCmtsKeyRejects   OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted a Key Reject message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.6."
+::= { docsBpiCmtsTEKEntry 8 }
+
+docsBpiCmtsTEKInvalids  OBJECT-TYPE
+SYNTAX                  Counter32
+MAX-ACCESS              read-only
+STATUS                  current
+DESCRIPTION
+"The value of this object is the count of times the CMTS has
+transmitted a TEK Invalid message."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Section 4.2.1.8."
+::= { docsBpiCmtsTEKEntry 9 }
+
+docsBpiCmtsKeyRejectErrorCode   OBJECT-TYPE
+SYNTAX                          INTEGER {
+                                        none(1),
+                                        unknown(2),
+                                        unauthorizedSid(4)
+                                }
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in the most recent Key Reject message sent in response to
+a Key Request for this BPI SID. This has value unknown(2) if the last
+Error-Code value was 0, and none(1) if no Key Reject message has been
+received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.6
+and 4.2.2.16."
+::= { docsBpiCmtsTEKEntry 10 }
+
+docsBpiCmtsKeyRejectErrorString OBJECT-TYPE
+SYNTAX                          DisplayString (SIZE (0..128))
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the Display-String in the most recent
+Key Reject message sent in response to a Key Request for this BPI
+SID.  This is a zero length string if no Key Reject message has been
+received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.6
+and 4.2.2.6."
+::= { docsBpiCmtsTEKEntry 11 }
+
+docsBpiCmtsTEKInvalidErrorCode  OBJECT-TYPE
+SYNTAX                          INTEGER {
+                                        none(1),
+                                        unknown(2),
+                                        invalidKeySequence(6)
+                                }
+MAX-ACCESS                      read-only
+STATUS                          current
+DESCRIPTION
+"The value of this object is the enumerated description of the
+Error-Code in the most recent TEK Invalid message sent in association
+with this BPI SID.  This has value unknown(2) if the last Error-Code
+value was 0, and none(1) if no TEK Invalid message has been received
+
+since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.8
+and 4.2.2.16."
+::= { docsBpiCmtsTEKEntry 12 }
+
+docsBpiCmtsTEKInvalidErrorString        OBJECT-TYPE
+SYNTAX                                  DisplayString (SIZE (0..128))
+MAX-ACCESS                              read-only
+STATUS                                  current
+DESCRIPTION
+"The value of this object is the Display-String in the most recent TEK
+Invalid message sent in association with this BPI SID.  This is a zero
+length string if no TEK Invalid message has been received since reboot."
+REFERENCE
+"DOCSIS Baseline Privacy Interface Specification, Sections 4.2.1.8
+and 4.2.2.6."
+::= { docsBpiCmtsTEKEntry 13 }
+
+--
+-- The CMTS Multicast Control Group
+--
+
+docsBpiMulticastControl OBJECT IDENTIFIER ::= { docsBpiCmtsObjects 4 }
+
+--
+-- The CMTS IP Multicast Mapping Table, indexed by IP multicast
+-- address and prefix, and by ifindex
+--
+
+docsBpiIpMulticastMapTable      OBJECT-TYPE
+SYNTAX                          SEQUENCE OF DocsBpiIpMulticastMapEntry
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"This table describes the mapping of IP multicast address prefixes to
+multicast SIDs on each CMTS MAC interface."
+::= { docsBpiMulticastControl 1 }
+
+docsBpiIpMulticastMapEntry      OBJECT-TYPE
+SYNTAX                          DocsBpiIpMulticastMapEntry
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"Each entry contains objects describing the mapping of one IP
+multicast address prefix to one multicast SID on one CMTS MAC
+interface. The CMTS uses the mapping when forwarding downstream IP
+multicast traffic."
+INDEX                           { ifIndex, docsBpiIpMulticastAddress,
+                                  docsBpiIpMulticastPrefixLength }
+::= { docsBpiIpMulticastMapTable 1 }
+
+DocsBpiIpMulticastMapEntry ::= SEQUENCE {
+docsBpiIpMulticastAddress       IpAddress,
+docsBpiIpMulticastPrefixLength  Integer32,
+docsBpiIpMulticastServiceId     Integer32,
+docsBpiIpMulticastMapControl    RowStatus
+}
+
+docsBpiIpMulticastAddress       OBJECT-TYPE
+SYNTAX                          IpAddress
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"This object represents the IP multicast address (prefix) to be
+mapped by this row, in conjunction with
+docsBpiIpMulticastPrefixLength."
+::= { docsBpiIpMulticastMapEntry 1 }
+
+docsBpiIpMulticastPrefixLength  OBJECT-TYPE
+SYNTAX                          Integer32 (0..32)
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"This object represents the IP multicast address prefix length
+for this row. The value of this object represents the length in
+bits of docsBpiIpMulticastAddress for multicast address
+comparisons, using big-endian ordering. An IP multicast address
+matches this row if the (docsBpiIpMulticastPrefixLength) most
+significant bits of the IP multicast address and of the
+(docsBpiIpMulticastAddress) are identical.
+This object is similar in usage to an IP address mask. The value
+0 corresponds to IP address mask 0.0.0.0, the value 1 corresponds
+to IP address mask 128.0.0.0, the value 8 corresponds to IP
+address mask 255.0.0.0, and the value 32 corresponds to IP
+address mask 255.255.255.255."
+::= { docsBpiIpMulticastMapEntry 2 }
+
+docsBpiIpMulticastServiceId     OBJECT-TYPE
+SYNTAX                          Integer32 (8192..16368)
+MAX-ACCESS                      read-create
+STATUS                          current
+DESCRIPTION
+"This object represents the multicast SID to be used in this
+IP multicast address prefix mapping entry."
+-- DEFVAL is an unused multicast SID value chosen by CMTS.
+::= { docsBpiIpMulticastMapEntry 3 }
+
+docsBpiIpMulticastMapControl    OBJECT-TYPE
+SYNTAX                          RowStatus
+MAX-ACCESS                      read-create
+STATUS                          current
+DESCRIPTION
+"This object controls and reflects the IP multicast address prefix
+mapping entry. There is no restriction on the ability to change values
+in this row while the row is active."
+::= { docsBpiIpMulticastMapEntry 4 }
+
+--
+-- The CMTS Multicast SID Authorization Table, indexed by ifIndex by
+-- multicast SID by CM MAC address
+--
+
+docsBpiMulticastAuthTable       OBJECT-TYPE
+SYNTAX                          SEQUENCE OF DocsBpiMulticastAuthEntry
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"This table describes the multicast SID authorization for each
+CM on each CMTS MAC interface."
+::= { docsBpiMulticastControl 2 }
+
+docsBpiMulticastAuthEntry       OBJECT-TYPE
+SYNTAX                          DocsBpiMulticastAuthEntry
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"Each entry contains objects describing the key authorization of one
+cable modem for one multicast SID for one CMTS MAC interface."
+INDEX                           { ifIndex, docsBpiMulticastServiceId,
+                                  docsBpiMulticastCmMacAddress }
+::= { docsBpiMulticastAuthTable 1 }
+
+DocsBpiMulticastAuthEntry ::= SEQUENCE {
+docsBpiMulticastServiceId       Integer32,
+docsBpiMulticastCmMacAddress    MacAddress,
+docsBpiMulticastAuthControl     RowStatus
+}
+
+docsBpiMulticastServiceId       OBJECT-TYPE
+SYNTAX                          Integer32 (8192..16368)
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"This object represents the multicast SID for authorization."
+::= { docsBpiMulticastAuthEntry 1 }
+
+docsBpiMulticastCmMacAddress    OBJECT-TYPE
+SYNTAX                          MacAddress
+MAX-ACCESS                      not-accessible
+STATUS                          current
+DESCRIPTION
+"This object represents the MAC address of the CM to which the
+multicast SID authorization applies."
+::= { docsBpiMulticastAuthEntry 2 }
+
+docsBpiMulticastAuthControl     OBJECT-TYPE
+SYNTAX                          RowStatus
+MAX-ACCESS                      read-create
+STATUS                          current
+DESCRIPTION
+"This object controls and reflects the CM authorization for each
+multicast SID. There is no restriction on the ability to change
+values in this row while the row is active."
+::= { docsBpiMulticastAuthEntry 3 }
+
+--
+-- The BPI MIB Conformance Statements (with a placeholder for
+-- notifications)
+--
+
+docsBpiNotification     OBJECT IDENTIFIER ::= { docsBpiMIB 2 }
+docsBpiConformance      OBJECT IDENTIFIER ::= { docsBpiMIB 3 }
+docsBpiCompliances      OBJECT IDENTIFIER ::= { docsBpiConformance 1 }
+docsBpiGroups           OBJECT IDENTIFIER ::= { docsBpiConformance 2 }
+
+docsBpiBasicCompliance MODULE-COMPLIANCE
+STATUS          current
+DESCRIPTION
+"This is the compliance statement for devices which implement the
+DOCSIS Baseline Privacy Interface."
+
+MODULE  -- docsBpiMIB
+
+-- conditionally mandatory group
+GROUP   docsBpiCmGroup
+DESCRIPTION
+"This group is implemented only in CMs, not in CMTSs."
+
+-- conditionally mandatory group
+GROUP   docsBpiCmtsGroup
+DESCRIPTION
+"This group is implemented only in CMTSs, not in CMs."
+
+-- relaxation on mandatory range (unnecessary since object is read-only)
+-- OBJECT       docsBpiCmAuthGraceTime
+-- SYNTAX       Integer32 (300..1800)
+-- DESCRIPTION
+-- "The refined range corresponds to the minimum and maximum values in
+-- operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range (unnecessary since object is read-only)
+-- OBJECT       docsBpiCmTEKGraceTime
+-- SYNTAX       Integer32 (300..1800)
+-- DESCRIPTION
+-- "The refined range corresponds to the minimum and maximum values in
+-- operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range
+OBJECT  docsBpiCmtsDefaultAuthLifetime
+SYNTAX  Integer32 (86400..6048000)
+DESCRIPTION
+"The refined range corresponds to the minimum and maximum values in
+operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range
+OBJECT  docsBpiCmtsDefaultTEKLifetime
+SYNTAX  Integer32 (1800..604800)
+DESCRIPTION
+"The refined range corresponds to the minimum and maximum values in
+operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range (object removed from MIB)
+-- OBJECT       docsBpiCmtsDefaultAuthGraceTime
+-- SYNTAX       INTEGER (300..1800)
+-- DESCRIPTION
+-- "The refined range corresponds to the minimum and maximum values in
+-- operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range  (object removed from MIB)
+-- OBJECT       docsBpiCmtsDefaultTEKGraceTime
+-- SYNTAX       INTEGER (300..1800)
+-- DESCRIPTION
+-- "The refined range corresponds to the minimum and maximum values in
+-- operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range
+OBJECT  docsBpiCmtsAuthCmLifetime
+SYNTAX  Integer32 (86400..6048000)
+DESCRIPTION
+"The refined range corresponds to the minimum and maximum values in
+operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range (unnecessary since object is read-only)
+-- OBJECT       docsBpiCmtsAuthCmGraceTime
+-- SYNTAX       Integer32 (300..1800)
+-- DESCRIPTION
+-- "The refined range corresponds to the minimum and maximum values in
+-- operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range
+OBJECT  docsBpiCmtsTEKLifetime
+SYNTAX  Integer32 (1800..604800)
+DESCRIPTION
+"The refined range corresponds to the minimum and maximum values in
+operational networks, according to Appendix A.2 in [18]."
+
+-- relaxation on mandatory range (unnecessary since object is read-only)
+-- OBJECT       docsBpiCmtsTEKGraceTime
+-- SYNTAX       Integer32 (300..1800)
+-- DESCRIPTION
+-- "The refined range corresponds to the minimum and maximum values in
+-- operational networks, according to Appendix A.2 in [18]."
+::= { docsBpiCompliances 1 }
+
+docsBpiCmGroup  OBJECT-GROUP
+OBJECTS {
+docsBpiCmPrivacyEnable,
+docsBpiCmPublicKey,
+docsBpiCmAuthState,
+docsBpiCmAuthKeySequenceNumber,
+docsBpiCmAuthExpires,
+docsBpiCmAuthReset,
+docsBpiCmAuthGraceTime,
+docsBpiCmTEKGraceTime,
+docsBpiCmAuthWaitTimeout,
+docsBpiCmReauthWaitTimeout,
+docsBpiCmOpWaitTimeout,
+docsBpiCmRekeyWaitTimeout,
+docsBpiCmAuthRejectWaitTimeout,
+docsBpiCmAuthRequests,
+docsBpiCmAuthReplies,
+docsBpiCmAuthRejects,
+docsBpiCmAuthInvalids,
+docsBpiCmAuthRejectErrorCode,
+docsBpiCmAuthRejectErrorString,
+docsBpiCmAuthInvalidErrorCode,
+docsBpiCmAuthInvalidErrorString,
+docsBpiCmTEKPrivacyEnable,
+docsBpiCmTEKState,
+docsBpiCmTEKExpiresOld,
+docsBpiCmTEKExpiresNew,
+docsBpiCmTEKKeyRequests,
+docsBpiCmTEKKeyReplies,
+docsBpiCmTEKKeyRejects,
+docsBpiCmTEKInvalids,
+docsBpiCmTEKAuthPends,
+docsBpiCmTEKKeyRejectErrorCode,
+docsBpiCmTEKKeyRejectErrorString,
+docsBpiCmTEKInvalidErrorCode,
+docsBpiCmTEKInvalidErrorString
+}
+STATUS                  current
+DESCRIPTION
+"This collection of objects provides CM BPI status and control."
+::= { docsBpiGroups 1 }
+
+docsBpiCmtsGroup        OBJECT-GROUP
+OBJECTS {
+docsBpiCmtsDefaultAuthLifetime,
+docsBpiCmtsDefaultTEKLifetime,
+docsBpiCmtsAuthRequests,
+docsBpiCmtsAuthReplies,
+docsBpiCmtsAuthRejects,
+docsBpiCmtsAuthInvalids,
+docsBpiCmtsAuthCmPublicKey,
+docsBpiCmtsAuthCmKeySequenceNumber,
+docsBpiCmtsAuthCmExpires,
+docsBpiCmtsAuthCmLifetime,
+docsBpiCmtsAuthCmGraceTime,
+docsBpiCmtsAuthCmReset,
+docsBpiCmtsAuthCmRequests,
+docsBpiCmtsAuthCmReplies,
+docsBpiCmtsAuthCmRejects,
+docsBpiCmtsAuthCmInvalids,
+docsBpiCmtsAuthRejectErrorCode,
+docsBpiCmtsAuthRejectErrorString,
+docsBpiCmtsAuthInvalidErrorCode,
+docsBpiCmtsAuthInvalidErrorString,
+docsBpiCmtsTEKLifetime,
+docsBpiCmtsTEKGraceTime,
+docsBpiCmtsTEKExpiresOld,
+docsBpiCmtsTEKExpiresNew,
+docsBpiCmtsTEKReset,
+docsBpiCmtsKeyRequests,
+docsBpiCmtsKeyReplies,
+docsBpiCmtsKeyRejects,
+docsBpiCmtsTEKInvalids,
+docsBpiCmtsKeyRejectErrorCode,
+docsBpiCmtsKeyRejectErrorString,
+docsBpiCmtsTEKInvalidErrorCode,
+docsBpiCmtsTEKInvalidErrorString,
+docsBpiIpMulticastServiceId,
+docsBpiIpMulticastMapControl,
+docsBpiMulticastAuthControl
+}
+STATUS          current
+DESCRIPTION
+"This collection of objects provides CMTS BPI status and control."
+::= { docsBpiGroups 2 }
+
+docsBpiObsoleteObjectsGroup     OBJECT-GROUP
+OBJECTS {
+docsBpiCmtsDefaultAuthGraceTime,
+docsBpiCmtsDefaultTEKGraceTime
+}
+STATUS          obsolete
+DESCRIPTION
+"This is a collection of obsolete BPI objects."
+::= { docsBpiGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/DOCS-CABLE-DEVICE-MIB.mib b/snmp_builder/mibs/DOCS-CABLE-DEVICE-MIB.mib
new file mode 100644
index 0000000..fb3a9ed
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-CABLE-DEVICE-MIB.mib
@@ -0,0 +1,3141 @@
+DOCS-CABLE-DEVICE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        OBJECT-TYPE,
+        IpAddress,
+        Unsigned32,
+        Counter32,
+        Integer32,
+        zeroDotZero,
+        mib-2
+                FROM SNMPv2-SMI           -- RFC 2578
+        RowStatus,
+        RowPointer,
+        DateAndTime,
+        TruthValue,
+        StorageType
+                FROM SNMPv2-TC            -- RFC 2579
+        InetAddressType,
+        InetAddress
+                FROM INET-ADDRESS-MIB     -- RFC 4001
+        OBJECT-GROUP,
+        MODULE-COMPLIANCE
+                FROM SNMPv2-CONF          -- RFC 2580
+        SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB   -- RFC 3411
+        InterfaceIndexOrZero
+                FROM IF-MIB               -- RFC 2863
+        ZeroBasedCounter32
+                FROM RMON2-MIB            -- RFC 4502
+        diffServMIBDataPathGroup,
+        diffServMIBClfrGroup,
+        diffServMIBClfrElementGroup,
+        diffServMIBMultiFieldClfrGroup,
+        diffServMIBActionGroup,
+        diffServMIBDscpMarkActGroup,
+        diffServMIBCounterGroup,
+        diffServMIBAlgDropGroup,
+        diffServDataPathStatus,
+        diffServClfrStatus,
+        diffServClfrElementStatus,
+        diffServMultiFieldClfrAddrType,
+        diffServMultiFieldClfrSrcAddr,
+        diffServMultiFieldClfrDstAddr,
+        diffServAlgDropStatus,
+        diffServDataPathStorage,
+        diffServClfrStorage,
+        diffServClfrElementStorage,
+        diffServMultiFieldClfrStorage,
+        diffServActionStorage,
+        diffServCountActStorage,
+        diffServAlgDropStorage,
+        diffServAlgDropType
+                FROM DIFFSERV-MIB;        -- RFC 3289
+
+docsDev MODULE-IDENTITY
+        LAST-UPDATED    "200612200000Z" -- December 20, 2006
+        ORGANIZATION    "IETF IP over Cable Data Network
+                         Working Group"
+        CONTACT-INFO
+            "        Rich Woundy
+             Postal: Comcast Cable
+                     27 Industrial Avenue
+                     Chelmsford, MA 01824 U.S.A.
+             Phone:  +1 978 244 4010
+             E-mail: richard_woundy@cable.comcast.com
+
+                     Kevin Marez
+             Postal: Motorola Corporation
+                     6450 Sequence Drive
+                     San Diego, CA 92121 U.S.A.
+             Phone:  +1 858 404 3785
+             E-mail: kevin.marez@motorola.com
+
+             IETF IPCDN Working Group
+             General Discussion: ipcdn@ietf.org
+             Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+             Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+             Co-chairs: Richard Woundy,
+                        richard_woundy@cable.comcast.com
+                        Jean-Francois Mule,
+                        jf.mule@cablelabs.com"
+        DESCRIPTION
+            "This is the MIB Module for DOCSIS-compliant cable modems
+
+             and cable-modem termination systems.
+
+             Copyright (C) The IETF Trust (2006).  This version
+             of this MIB module was published in RFC 4639; for full
+             legal notices see the RFC itself."
+
+        REVISION "200612200000Z" -- December 20, 2006
+        DESCRIPTION
+            "Second version, published as RFC 4639.
+
+             Modifications to this MIB module since RFC 2669 include:
+             - Deprecation of the docsDevFilter group in favor of the
+               DiffServ MIB groups, to enable support for IPv6
+               filtering and DiffServ Code Point (DSCP) marking.
+             - Deprecation of the docsDevCpeGroup in favor of the
+               docsDevCpeInetGroup, to enable support of IPv6.
+             - Addition of various InetAddress objects to enable
+               support of IPv6.
+             - Deprecation of docsDevNmAccessTable in favor of SNMP
+               Coexistence and SNMPv3 -- yet adding
+               docsDevNmAccessTrapVersion and clarifying
+               docsDevNmAccessIp for current use of this table,
+             - Addition of docsDevIgmpModeControl for management and
+               control of the IGMP mode of operation,
+             - Addition of docsDevMaxCpe for management of the
+               maxmium number of CPEs permitted access through a
+               cable modem,
+             - Addition of docsDevSwServerTransportProtocol, and
+               modifications to docsDevSoftware object DESCRIPTIONS,
+               to enable software downloads via either TFTP or HTTP,
+             - Replacement of docsDevEvThrottleInhibited with
+               docsDevEvThrottleThresholdExceeded to simplify
+               event threshold management,
+             - Modification of docsDevEvReporting to enable local
+               logging to the internal volatile log, and not to the
+               internal non-volatile log,
+             - Modification of the compliance statement to make the
+               docsDevCpe objects optional
+             - Created placeholders for two OIDs in the
+               docsDevFilterPolicyTable that were never used
+             - Modified the DESCRIPTION of
+               docsDevSwServerTransportProtocol and
+               docsDevSwServerAddressType to address the
+               dependence between each object
+             - Added a reference to docsDevServerConfigTftpAddress
+             - Clarified the scope of notifications that are covered
+               by docsDevEvThrottleThreshold
+             - Clarified an error condition that could occur when
+
+               doing a SET to docsDevEvReporting
+             - Defined each of the enumerated types for both
+               docsDevEvLevel and docsDevEvPriority
+             - Added UNITS clause to docsDevFilterLLCMatches,
+               docsDevFilterIpMatches, docsDevMaxCpe,
+               docsDevEvThrottleThreshold and docsDevEvCounts.
+             - Added REFERENCE clause to docsDevFilterIpProtocol
+             - Modified DESCRIPTION of docsDevCpeInetAddr to be
+               more protocol-neutral
+             - Removed the enumerated value (1) from both
+               docsDevCpeInetSource and docsDevCpeSource
+             - Covered additional read-write and read-create objects
+               in the Security Considerations section
+             - Modified the default value of docsDevNmAccessIpMask
+               to be consistent with OSSI specification
+             - Modified the SYNTAX of docsDevNmAccessCommunity and
+               docsDevNmAccessInterfaces in the Conformance
+               Statement section
+             - Added SYNTAX clause to docsDevEvReporting in the
+               Conformance Statement section
+             - Modified SYNTAX clause of docsDevEvReporting to
+               move new enumerated type to byte boundary
+             - Added references to DOCSIS 2.0 specifications to
+               multiple objects
+             - Clarified non-persistency across reboots for
+               all tables
+             - Clarified functionality of docsDevSw objects as
+               they relate to docsDevSwOperStatus
+             - Clarified enumerated types (9) and (10) for
+               docsDevServerBootState
+             - Defined the state of unknown(0) for the following
+               objects:  docsDevServerDhcpAddressType,
+               docsDevServerTimeAddressType,
+               docsDevServerConfigTftpAddressType and
+               docsDevServerConfigTftpAddressType
+             - Modified the value in docsDevFilterIpDaddr to be
+               consistent with the SYNTAX
+             - Specified which rows could be modified in an
+               active row for docsDevFilterPolicyStatus
+             - Defined the term 'manually' in docsDevCpeEnroll
+             - Clarified the description for
+               docsDevFilterTosOrMask
+             - Covered the case of a non-existent row for
+               docsDevFilterPolicyPtr
+             - Added DEFVAL clauses for multiple objects
+             - Replaced docsDevNotification OBJECT IDENTIFIER
+               with docsDevNotifications to address possible
+               compatibility issues
+
+             - Added support for the usage of RFC 3413 and RFC 3014
+               as event notification mechanisms
+             - Removed docsDevFilterPolicyObsoleteGroup
+             - Added stdInterface(9) type to docsDevEvReporting to
+               support the usage of RFC3413 and RFC3014
+             - Modified DESCRIPTION for docsDevMaxCpe"
+
+        REVISION "199908190000Z"
+        DESCRIPTION
+            "Initial version, published as RFC 2669."
+        ::= { mib-2 69 }
+
+docsDevMIBObjects  OBJECT IDENTIFIER ::= { docsDev 1 }
+
+docsDevBase OBJECT IDENTIFIER ::= { docsDevMIBObjects 1 }
+
+--
+-- For the following object, there is no concept in the
+-- RFI specification corresponding to a backup CMTS.  The
+-- enumeration is provided here in case someone is able
+-- to define such a role or device.
+--
+
+docsDevRole OBJECT-TYPE
+        SYNTAX INTEGER {
+            cm(1),
+            cmtsActive(2),
+            cmtsBackup(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Defines the current role of this device.  cm(1) is a
+             Cable Modem, cmtsActive(2) is a Cable Modem Termination
+             System that is controlling the system of cable modems,
+             and cmtsBackup(3) is a CMTS that is currently connected
+             but is not controlling the system (not currently used).
+
+             In general, if this device is a 'cm', its role will not
+             change during operation or between reboots.  If the
+             device is a 'cmts' it may change between cmtsActive and
+             cmtsBackup and back again during normal operation.  NB:
+             At this time, the DOCSIS standards do not support the
+             concept of a backup CMTS, but cmtsBackup is included for
+             completeness."
+        ::= { docsDevBase 1 }
+
+docsDevDateTime OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The current date and time, with time zone information
+             (if known).
+
+             If the real data and time cannot be determined, this
+             shall represent elapsed time from boot relative to
+             the standard epoch '1970-1-1,0:0:0.0'.  In other
+             words, if this agent has been up for 3 minutes and
+             not been able to determine what the actual date and
+             time are, this object will return the value
+             '1970-1-1,0:03:0.0'."
+        ::= { docsDevBase 2 }
+
+docsDevResetNow OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Setting this object to true(1) causes the device to
+             reset.  Reading this object always returns false(2)."
+        ::= { docsDevBase 3 }
+
+docsDevSerialNumber OBJECT-TYPE
+        SYNTAX      SnmpAdminString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The manufacturer's serial number for this device."
+        ::= { docsDevBase 4 }
+
+docsDevSTPControl OBJECT-TYPE
+        SYNTAX INTEGER {
+            stEnabled(1),
+            noStFilterBpdu(2),
+            noStPassBpdu(3)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object controls operation of the spanning tree
+             protocol (as distinguished from transparent bridging).
+
+             If set to stEnabled(1), then the spanning tree protocol
+             is enabled, subject to bridging constraints.
+
+             If noStFilterBpdu(2), then spanning tree is not active,
+             and Bridge PDUs received are discarded.
+
+             If noStPassBpdu(3), then spanning tree is not active,
+             and Bridge PDUs are transparently forwarded.
+
+             Note that a device need not implement all of these
+             options, but that noStFilterBpdu(2) is required."
+        DEFVAL { noStFilterBpdu }
+        ::= { docsDevBase 5 }
+
+docsDevIgmpModeControl OBJECT-TYPE
+        SYNTAX INTEGER {
+            passive(1),
+            active(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object controls the IGMP mode of operation for
+             the CM or CMTS.  In passive mode, the device forwards
+             IGMP between interfaces as based on knowledge of
+             Multicast Session activity on the subscriber side
+             interface and the rules defined in the DOCSIS RFI
+             specification.  In active mode, the device terminates
+             at and initiates IGMP through its interfaces as based
+             on the knowledge of Multicast Session activity on the
+             subscriber side interface."
+        REFERENCE
+            "DOCSIS RFI 1.1 Specification, Section 3.3.1. and
+             DOCSIS RFI 2.0 Specification, Section 5.3.1."
+        DEFVAL { passive }
+        ::= { docsDevBase 6 }
+
+docsDevMaxCpe OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..255)
+        UNITS       "CPEs"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The maximum number of CPEs that can be granted access
+             through a CM during a CM epoch.  This value can be
+             obtained from the CM configuration file; however,
+             it may be adjusted by the CM according to hardware or
+             software limitations that have been imposed on the
+             implementation."
+        REFERENCE
+            "DOCSIS RFI 1.0 Specification, Appendix C.7.20., and
+
+             DOCSIS RFI 1.1 Specification, Appendix C.1.1.7. and
+             DOCSIS RFI 2.0 Specification, Appendix C.1.1.7."
+        ::= { docsDevBase 7 }
+
+--
+-- The following table provides one level of security for access
+-- to the device by network management stations.
+-- Note that access is also constrained by the
+-- community strings and any vendor-specific security.
+--
+
+docsDevNmAccessTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevNmAccessEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "This table controls access to SNMP objects by network
+             management stations.  If the table is empty, access to
+             SNMP objects is unrestricted.  The objects in this table
+             MUST NOT persist across reboots.  The objects in this
+             table are only accessible from cable devices that are
+             not capable of operating in SNMP Coexistence mode
+             (RFC 3584) or in SNMPv3 mode (RFC 3410).
+             See the conformance section for
+             details.  Note that some devices are required by other
+             specifications (e.g., the DOCSIS OSSIv1.1 specification)
+             to support the legacy SNMPv1/v2c docsDevNmAccess mode
+             for backward compatibility.
+
+             This table is deprecated.  Instead, use the SNMP
+             coexistence MIBs from RFC 3584, the TARGET and
+             NOTIFICATION MIBs from RFC 3413, and
+             the View-Based Access Control Model (VACM) MIBs for
+             all SNMP protocol versions from RFC 3415."
+        ::= { docsDevMIBObjects 2 }
+
+docsDevNmAccessEntry OBJECT-TYPE
+        SYNTAX      DocsDevNmAccessEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "An entry describing access to SNMP objects by a
+             particular network management station.  An entry in
+             this table is not readable unless the management station
+             has read-write permission (either implicit if the table
+             is empty, or explicit through an entry in this table).
+             Entries are ordered by docsDevNmAccessIndex.  The first
+
+             matching entry (e.g., matching IP address and community
+             string) is used to derive access."
+        INDEX { docsDevNmAccessIndex }
+        ::= {  docsDevNmAccessTable 1 }
+
+DocsDevNmAccessEntry ::= SEQUENCE {
+            docsDevNmAccessIndex         Integer32,
+            docsDevNmAccessIp            IpAddress,
+            docsDevNmAccessIpMask        IpAddress,
+            docsDevNmAccessCommunity     OCTET STRING,
+            docsDevNmAccessControl       INTEGER,
+            docsDevNmAccessInterfaces    OCTET STRING,
+            docsDevNmAccessStatus        RowStatus,
+            docsDevNmAccessTrapVersion   INTEGER
+        }
+
+docsDevNmAccessIndex OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "Index used to order the application of access
+             entries."
+        ::= { docsDevNmAccessEntry 1 }
+
+docsDevNmAccessIp OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP address (or subnet) of the network management
+             station.  The address 0.0.0.0 is defined to mean
+             any Network Management Station (NMS).  If traps are
+             enabled for this entry, then the value must be the
+             address of a specific device.  Implementations MAY
+             recognize 255.255.255.255 as equivalent to 0.0.0.0."
+        DEFVAL { '00000000'h }
+        ::= { docsDevNmAccessEntry 2 }
+
+docsDevNmAccessIpMask OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP subnet mask of the network management stations.
+             If traps are enabled for this entry, then the value must
+             be 0.0.0.0.  Implementations MAY recognize
+             255.255.255.255 as equivalent to 0.0.0.0."
+        DEFVAL { '00000000'h }
+        ::= { docsDevNmAccessEntry 3 }
+
+docsDevNmAccessCommunity OBJECT-TYPE
+        SYNTAX      OCTET STRING
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The community string to be matched for access by this
+             entry.  If set to a zero-length string, then any
+             community string will match.  When read, this object
+             SHOULD return a zero-length string."
+        DEFVAL { "public" }
+        ::= { docsDevNmAccessEntry 4 }
+
+docsDevNmAccessControl OBJECT-TYPE
+        SYNTAX         INTEGER {
+            none(1),
+            read(2),
+            readWrite(3),
+            roWithTraps(4),
+            rwWithTraps(5),
+            trapsOnly(6)
+        }
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Specifies the type of access allowed to this NMS.
+             Setting this object to none(1) causes the table entry
+             to be destroyed.  Read(2) allows access by 'get' and
+             'get-next' PDUs.  ReadWrite(3) allows access by 'set' as
+             well.  RoWithtraps(4), rwWithTraps(5), and trapsOnly(6)
+             control distribution of Trap PDUs transmitted by this
+             device."
+        DEFVAL { read }
+        ::= { docsDevNmAccessEntry 5 }
+
+-- The syntax of the following object was copied from RFC 1493,
+-- dot1dStaticAllowedToGoTo.
+
+docsDevNmAccessInterfaces OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (1..32))
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Specifies the set of interfaces from which requests from
+             this NMS will be accepted.  Each octet within
+             the value of this object specifies a set of eight
+
+             interfaces, the first octet specifying ports 1
+             through 8, the second octet specifying interfaces 9
+             through 16, etc.  Within each octet, the most
+             significant bit represents the lowest numbered
+             interface, and the least significant bit represents the
+             highest numbered interface.  Thus, each interface is
+             represented by a single bit within the value of this
+             object.  If that bit has a value of '1' then that
+             interface is included in the set.
+
+             Note that entries in this table apply only to link-layer
+             interfaces (e.g., Ethernet and CATV MAC).  Bits
+             representing upstream and downstream channel interfaces
+             MUST NOT be set to '1'.
+
+             Note that if bits corresponding to non-existing
+             interfaces are set, the result is implementation
+             specific.
+
+             Note that according to the DOCSIS OSSIv1.1
+             specification, when ifIndex '1' is included in the
+             set, then this row applies to all CPE
+             (customer-facing) interfaces.
+
+             The size of this object is the minimum required to
+             represent all configured interfaces for this device."
+        ::= { docsDevNmAccessEntry 6 }
+
+docsDevNmAccessStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Controls and reflects the status of rows in this
+             table.  Rows in this table may be created by either the
+             create-and-go or create-and-wait paradigm.  There is no
+             restriction on changing values in a row of this table
+             while the row is active.
+
+             The following objects MUST have valid values before this
+             object can be set to active: docsDevNmAccessIp,
+             docsDevNmAccessStatus, docsDevNmAccessIpMask,
+             docsDevNmAccessCommunity, docsDevNmAccessControl, and
+             docsDevNmAccessInterfaces."
+        ::= { docsDevNmAccessEntry 7 }
+
+docsDevNmAccessTrapVersion OBJECT-TYPE
+        SYNTAX      INTEGER {
+
+            disableSNMPv2trap(1),
+            enableSNMPv2trap(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Specifies the TRAP version that is sent to this NMS.
+             Setting this object to disableSNMPv2trap (1) causes the
+             trap in SNMPv1 format to be sent to a particular NMS.
+             Setting this object to enableSNMPv2trap (2) causes the
+             trap in SNMPv2 format be sent to a particular NMS."
+        DEFVAL { disableSNMPv2trap }
+        ::= { docsDevNmAccessEntry 8 }
+
+--
+-- The following group describes control objects used for downloading
+-- firmware to a cable device.  Procedures for software download are
+-- described in Section 3.2.1 of the RFC containing this MIB module.
+--
+
+docsDevSoftware OBJECT IDENTIFIER ::= { docsDevMIBObjects 3 }
+
+docsDevSwServer OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-write
+        STATUS      deprecated
+        DESCRIPTION
+            "The address of the TFTP server used for software
+             upgrades.  If the TFTP server is unknown or is a
+             non-IPv4 address, return 0.0.0.0.
+
+             This object is deprecated.  See docsDevSwServerAddress
+             for its replacement.  This object will have its value
+             modified, given a valid SET to docsDevSwServerAddress."
+        ::= { docsDevSoftware 1 }
+
+docsDevSwFilename OBJECT-TYPE
+        SYNTAX      SnmpAdminString (SIZE (0..64))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The filename of the software image to be downloaded via
+             TFTP, or the abs_path (as defined in RFC 2616) of the
+             software image to be downloaded via HTTP.
+
+             Unless set via SNMP, this is the filename or abs_path
+             specified by the provisioning server during the boot
+             process that corresponds to the software version that
+
+             is desired for this device.
+
+             If unknown, the value of this object is the zero-length
+             string."
+        ::= { docsDevSoftware 2 }
+
+docsDevSwAdminStatus OBJECT-TYPE
+        SYNTAX INTEGER {
+            upgradeFromMgt(1),
+            allowProvisioningUpgrade(2),
+            ignoreProvisioningUpgrade(3)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "If set to upgradeFromMgt(1), the device will initiate a
+             TFTP or HTTP software image download.  After
+             successfully receiving an image, the device will set
+             its state to ignoreProvisioningUpgrade(3) and reboot.
+             If the download process is interrupted (e.g., by a reset
+             or power failure), the device will load the previous
+             image and, after re-initialization, continue to attempt
+             loading the image specified in docsDevSwFilename.
+
+             If set to allowProvisioningUpgrade(2), the device will
+             use the software version information supplied by the
+             provisioning server when next rebooting (this does not
+             cause a reboot).
+
+             When set to ignoreProvisioningUpgrade(3), the device
+             will disregard software image upgrade information
+             from the provisioning server.
+
+             Note that reading this object can return
+             upgradeFromMgt(1).  This indicates that a software
+             download is currently in progress, and that the device
+             will reboot after successfully receiving an image."
+        DEFVAL { allowProvisioningUpgrade }
+        ::= { docsDevSoftware 3 }
+
+docsDevSwOperStatus OBJECT-TYPE
+        SYNTAX INTEGER {
+            inProgress(1),
+            completeFromProvisioning(2),
+            completeFromMgt(3),
+            failed(4),
+            other(5)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "InProgress(1) indicates that a TFTP or HTTP download is
+             underway, either as a result of a version mismatch at
+             provisioning or as a result of a upgradeFromMgt request.
+             No other docsDevSw* objects can be modified in
+             this state.
+
+             CompleteFromProvisioning(2) indicates that the last
+             software upgrade was a result of version mismatch at
+             provisioning.
+
+             CompleteFromMgt(3) indicates that the last software
+             upgrade was a result of setting docsDevSwAdminStatus to
+             upgradeFromMgt.
+
+             Failed(4) indicates that the last attempted download
+             failed, ordinarily due to TFTP or HTTP timeout."
+        REFERENCE
+            "DOCSIS RFI 1.0 Specification, Section 8.2., and
+             DOCSIS RFI 1.1 Specification, Section 10.1. and
+             DOCSIS RFI 2.0 Specification, Section 12.1."
+        ::= { docsDevSoftware 4 }
+
+docsDevSwCurrentVers OBJECT-TYPE
+        SYNTAX      SnmpAdminString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The software version currently operating in this device.
+             This string's syntax is that used by the
+             individual vendor to identify software versions.
+             For a CM, this string will describe the current
+             software load.  For a CMTS, this object SHOULD contain
+             a human-readable representation either of the vendor
+             specific designation of the software for the chassis,
+             or of the software for the control processor.  If
+             neither of these is applicable, the value MUST be a
+             zero-length string."
+        ::= { docsDevSoftware 5 }
+
+docsDevSwServerAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The type of address of the TFTP or HTTP server used for
+
+             software upgrades.
+
+             If docsDevSwServerTransportProtocol is currently set to
+             tftp(1), attempting to set this object to dns(16) MUST
+             result in an error."
+        ::= { docsDevSoftware 6 }
+
+docsDevSwServerAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The address of the TFTP or HTTP server used for software
+             upgrades.
+
+             If the TFTP/HTTP server is unknown, return the zero-
+             length address string (see the TextualConvention).
+
+             If docsDevSwServer is also implemented in this agent,
+             this object is tied to it.  A set of this object to an
+             IPv4 address will result in also setting the value of
+             docsDevSwServer to that address.  If this object is set
+             to an IPv6 address, docsDevSwServer is set to 0.0.0.0.
+             If docsDevSwServer is set, this object is also set to
+             that value.  Note that if both are set in the same
+             action, the order of which one sets the other is
+             undefined."
+        ::= { docsDevSoftware 7 }
+
+docsDevSwServerTransportProtocol OBJECT-TYPE
+        SYNTAX INTEGER {
+            tftp(1),
+            http(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object specifies the transport protocol (TFTP or
+             HTTP) to be used for software upgrades.
+
+             If the value of this object is tftp(1), then the cable
+             device uses TFTP (RFC 1350) read request packets to
+             download the docsDevSwFilename from the
+             docsDevSwServerAddress in octet mode.
+
+             If the value of this object is http(2), then the cable
+             device uses HTTP 1.0 (RFC 1945) or HTTP 1.1 (RFC 2616)
+             GET requests sent to host docsDevSwServerAddress to
+
+             download the software image from path docsDevSwFilename.
+
+             If docsDevSwServerAddressType is currently set to
+             dns(16), attempting to set this object to tftp(1) MUST
+             result in an error."
+        DEFVAL { tftp }
+        ::= { docsDevSoftware 8 }
+
+--
+-- The following group describes server access and parameters used
+-- for initial provisioning and bootstrapping.
+--
+
+docsDevServer OBJECT IDENTIFIER ::= { docsDevMIBObjects 4 }
+
+docsDevServerBootState OBJECT-TYPE
+        SYNTAX INTEGER {
+            operational(1),
+            disabled(2),
+            waitingForDhcpOffer(3),
+            waitingForDhcpResponse(4),
+            waitingForTimeServer(5),
+            waitingForTftp(6),
+            refusedByCmts(7),
+            forwardingDenied(8),
+            other(9),
+            unknown(10)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "If operational(1), the device has completed loading and
+             processing of configuration parameters, and the CMTS has
+             completed the Registration exchange.
+
+             If disabled(2), then the device was administratively
+             disabled, possibly by being refused network access in
+             the configuration file.
+
+             If waitingForDhcpOffer(3), then a Dynamic Host
+             Configuration Protocol (DHCP) Discover has been
+             transmitted, and no offer has yet been received.
+
+             If waitingForDhcpResponse(4), then a DHCP Request has
+             been transmitted, and no response has yet been received.
+
+             If waitingForTimeServer(5), then a Time Request has been
+             transmitted, and no response has yet been received.
+
+             If waitingForTftp(6), then a request to the TFTP
+             parameter server has been made, and no response
+             received.
+
+             If refusedByCmts(7), then the Registration
+             Request/Response exchange with the CMTS failed.
+
+             If forwardingDenied(8), then the registration process
+             was completed, but the network access option in the
+             received configuration file prohibits forwarding.
+
+             If other(9), then the registration process reached a
+             point that does not fall into one of the above
+             categories.
+
+             If unknown(10), then the device has not yet begun the
+             registration process or is in some other indeterminate
+             state."
+        REFERENCE
+            "DOCSIS RFI 1.0 Specification, Figure 7-1, and
+             DOCSIS RFI 1.1 Specification, Figure 9-1 and
+             DOCSIS RFI 2.0 Specification, Figure 11-1."
+        ::= { docsDevServer 1 }
+
+docsDevServerDhcp OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP address of the DHCP server that assigned an IP
+             address to this device.  Returns 0.0.0.0 if DHCP is not
+             used for IP address assignment, or if this agent is
+             not assigned an IPv4 address.
+
+             This object is deprecated and is replaced by
+             docsDevServerDhcpAddress."
+        ::= { docsDevServer 2 }
+
+docsDevServerTime OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP address of the Time server (RFC 0868).  Returns
+             0.0.0.0 if the time server IP address is unknown, or if
+             the time server is not an IPv4 server.
+
+             This object is deprecated and is replaced by
+
+             docsDevServerTimeAddress."
+        ::= { docsDevServer 3 }
+
+docsDevServerTftp OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP address of the TFTP server responsible for
+             downloading provisioning and configuration parameters
+             to this device.  Returns 0.0.0.0 if the TFTP server
+             address is unknown or is not an IPv4 address.
+
+             This object is deprecated and is replaced by
+             docsDevServerConfigTftpAddress."
+        ::= { docsDevServer 4 }
+
+docsDevServerConfigFile OBJECT-TYPE
+        SYNTAX      SnmpAdminString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The name of the device configuration file read from
+             the TFTP server.  Returns a zero-length string if
+             the configuration file name is unknown."
+        ::= { docsDevServer 5 }
+
+docsDevServerDhcpAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of address of docsDevServerDhcpAddress.  If
+             DHCP was not used, this value should return
+             unknown(0)."
+        ::= { docsDevServer 6 }
+
+docsDevServerDhcpAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The internet address of the DHCP server that assigned
+             an IP address to this device.  Returns the zero length
+             octet string if DHCP was not used for IP address
+             assignment."
+        ::= { docsDevServer 7 }
+
+docsDevServerTimeAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of address of docsDevServerTimeAddress.  If
+             no time server exists, this value should return
+             unknown(0)."
+        ::= { docsDevServer 8 }
+
+docsDevServerTimeAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The Internet address of the RFC 868 Time server,
+             as provided by DHCP option 4.
+
+             Note that if multiple values are provided to the
+             CM in DHCP option 4, the value of this MIB object
+             MUST be the Time server address from which the Time
+             of Day reference was acquired as based on the DOCSIS
+             RFI specification.  During the period of time where
+             the Time of Day have not been acquired, the Time
+             server address reported by the CM may report the
+             first address value in the DHCP option value or the
+             last server address the CM attempted to get the Time
+             of day value.
+
+             Returns the zero-length octet string if the time server
+             IP address is not provisioned."
+        REFERENCE
+            "DOCSIS RFI 1.1 Specification, Section 9.2.7. and
+             DOCSIS RFI 2.0 Specification, Section 11.2.7."
+        ::= { docsDevServer 9 }
+
+docsDevServerConfigTftpAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of address of docsDevServerConfigTftpAddress.
+             If no TFTP server exists, this value should return
+             unknown(0)."
+        ::= { docsDevServer 10 }
+
+docsDevServerConfigTftpAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The internet address of the TFTP server responsible for
+             downloading provisioning and configuration parameters
+             to this device.  Returns the zero-length octet string if
+             the config server address is unknown.  There are certain
+             security risks that are involved with using TFTP."
+        REFERENCE
+            "RFC 3617, Section 5"
+        ::= { docsDevServer 11 }
+
+--
+-- Event Reporting
+--
+
+docsDevEvent OBJECT IDENTIFIER ::= { docsDevMIBObjects 5 }
+
+docsDevEvControl OBJECT-TYPE
+        SYNTAX INTEGER {
+            resetLog(1),
+            useDefaultReporting(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Setting this object to resetLog(1) empties the event
+             log.  All data is deleted.  Setting it to
+             useDefaultReporting(2) returns all event priorities to
+             their factory-default reporting.  Reading this object
+             always returns useDefaultReporting(2)."
+        ::= { docsDevEvent 1 }
+
+docsDevEvSyslog OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-write
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP address of the Syslog server.  If 0.0.0.0, either
+             syslog transmission is inhibited, or the Syslog server
+             address is not an IPv4 address.
+
+             This object is deprecated and is replaced by
+             docsDevEvSyslogAddress."
+        ::= { docsDevEvent 2 }
+
+docsDevEvThrottleAdminStatus OBJECT-TYPE
+        SYNTAX INTEGER {
+            unconstrained(1),
+            maintainBelowThreshold(2),
+            stopAtThreshold(3),
+            inhibited(4)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Controls the transmission of traps and syslog messages
+             with respect to the trap pacing threshold.
+
+             unconstrained(1) causes traps and syslog messages to be
+             transmitted without regard to the threshold settings.
+
+             maintainBelowThreshold(2) causes trap transmission and
+             syslog messages to be suppressed if the number of traps
+             would otherwise exceed the threshold.
+
+             stopAtThreshold(3) causes trap transmission to cease at
+             the threshold and not to resume until directed to do so.
+
+             inhibited(4) causes all trap transmission and syslog
+             messages to be suppressed.
+
+             A single event is always treated as a single event for
+             threshold counting.  That is, an event causing both a
+             trap and a syslog message is still treated as a single
+             event.
+
+             Writing to this object resets the thresholding state."
+        DEFVAL { unconstrained }
+        ::= { docsDevEvent 3 }
+
+docsDevEvThrottleInhibited OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION
+            "If true(1), trap and syslog transmission is currently
+             inhibited due to thresholds and/or the current setting
+             of docsDevEvThrottleAdminStatus.  In addition, this is
+             true(1) when transmission is inhibited because no
+             syslog (docsDevEvSyslog) or trap (docsDevNmAccessEntry)
+             destinations have been set.
+
+             This object is deprecated and is replaced by
+             docsDevEvThrottleThresholdExceeded."
+        ::= { docsDevEvent 4 }
+
+docsDevEvThrottleThreshold OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "events"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Number of events per docsDevEvThrottleInterval permitted
+             before throttling is to occur.
+
+             A single event, whether the notification could result in
+             messages transmitted using syslog, SNMP, or both
+             protocols, and regardless of the number of destinations,
+             (including zero) is always treated as a single event for
+             threshold counting.  For example, an event causing both
+             a trap and a syslog message is still treated as a single
+             event.
+
+             All system notifications that occur within the device
+             should be taken into consideration when calculating
+             and monitoring the threshold."
+        DEFVAL { 0 }
+        ::= { docsDevEvent 5 }
+
+docsDevEvThrottleInterval OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        UNITS       "seconds"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The interval over which docsDevEvThrottleThreshold
+             applies."
+        DEFVAL { 1 }
+        ::= { docsDevEvent 6 }
+
+--
+-- The following table controls the reporting of the various classes
+-- of events.
+--
+
+docsDevEvControlTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevEvControlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table allows control of the reporting of event
+             classes.  For each event priority, a combination of
+
+             logging and reporting mechanisms may be chosen.  The
+             mapping of event types to priorities is
+             vendor dependent.  Vendors may also choose to allow
+             the user to control that mapping through proprietary
+             means.  Table entries MUST persist across reboots for
+             CMTS devices and MUST NOT persist across reboots for CM
+             devices."
+        ::= {  docsDevEvent 7 }
+
+docsDevEvControlEntry OBJECT-TYPE
+        SYNTAX      DocsDevEvControlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Allows configuration of the reporting mechanisms for a
+             particular event priority."
+        INDEX { docsDevEvPriority }
+        ::= { docsDevEvControlTable 1 }
+
+DocsDevEvControlEntry ::= SEQUENCE {
+            docsDevEvPriority        INTEGER,
+            docsDevEvReporting       BITS
+        }
+
+docsDevEvPriority OBJECT-TYPE
+        SYNTAX INTEGER {
+            emergency(1),
+            alert(2),
+            critical(3),
+            error(4),
+            warning(5),
+            notice(6),
+            information(7),
+            debug(8)
+        }
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The priority level that is controlled by this
+             entry.  These are ordered from most (emergency) to least
+             (debug) critical.  Each event with a CM or CMTS has a
+             particular priority level associated with it (as defined
+             by the vendor).
+
+             emergency(1) events indicate vendor-specific fatal
+             hardware or software errors that prevent normal system
+             operation.
+
+             alert(2) events indicate a serious failure that causes
+             the reporting system to reboot but is not caused by
+             hardware or software malfunctioning.
+
+             critical(3) events indicate a serious failure that
+             requires attention and prevents the device from
+             transmitting data but that could be recovered without
+             rebooting the system.
+
+             error(4) and warning(5) events indicate that a failure
+             occurred that could interrupt the normal data flow but
+             that does not cause the device to re-register.
+
+             notice(6) and information(7) events indicate a
+             milestone or checkpoint in normal operation that could
+             be of particular importance for troubleshooting.
+
+             debug(8) events are reserved for vendor-specific
+             events.
+
+             During normal operation, no event more
+             critical than notice(6) should be generated.  Events
+             between warning and emergency should be generated at
+             appropriate levels of problems (e.g., emergency when the
+             box is about to crash)."
+        ::= { docsDevEvControlEntry 1 }
+
+docsDevEvReporting OBJECT-TYPE
+        SYNTAX BITS {
+            local(0),
+            traps(1),
+            syslog(2),
+            -- The following are extensions to the original set of
+            -- labels.  The extensions start at an octet boundary.
+            -- So for bits 3 - 7, one MUST set them to zero on send
+            -- and one MUST ignore them on receipt.
+            localVolatile(8),
+            stdInterface(9)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Defines the action to be taken on occurrence of this
+             event class.  Implementations may not necessarily
+             support all options for all event classes but at
+             minimum must allow traps and syslogging to be
+             disabled.
+
+             If the local(0) bit is set, then log to the internal
+             log and update non-volatile store, for backward
+             compatibility with the original RFC 2669 definition.
+             If the traps(1) bit is set, then generate
+             an SNMP trap; if the syslog(2) bit is set, then
+             send a syslog message (assuming that the syslog address
+             is set).  If the localVolatile(8) bit is set, then
+             log to the internal log without updating non-volatile
+             store.  If the stdInterface(9) bit is set, then the
+             agent ignores all other bits except the local(0),
+             syslog(2), and localVolatile(8) bits.  Setting the
+             stdInterface(9) bit indicates that RFC3413 and
+             RFC3014 are being used to control event reporting
+             mechanisms."
+        ::= { docsDevEvControlEntry 2 }
+
+docsDevEventTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevEventEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Contains a log of network and device events that may be
+             of interest in fault isolation and troubleshooting.
+             If the local(0) bit is set in docsDevEvReporting,
+             entries in this table MUST persist across reboots."
+        ::= {  docsDevEvent 8 }
+
+docsDevEventEntry OBJECT-TYPE
+        SYNTAX      DocsDevEventEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Describes a network or device event that may be of
+             interest in fault isolation and troubleshooting.
+             Multiple sequential identical events are represented by
+             incrementing docsDevEvCounts and setting
+             docsDevEvLastTime to the current time rather than
+             creating multiple rows.
+
+             Entries are created with the first occurrence of an
+             event.  docsDevEvControl can be used to clear the
+             table.  Individual events cannot be deleted."
+        INDEX { docsDevEvIndex }
+        ::= { docsDevEventTable 1 }
+
+DocsDevEventEntry ::= SEQUENCE {
+            docsDevEvIndex           Integer32,
+            docsDevEvFirstTime       DateAndTime,
+            docsDevEvLastTime        DateAndTime,
+            docsDevEvCounts          Counter32,
+            docsDevEvLevel           INTEGER,
+            docsDevEvId              Unsigned32,
+            docsDevEvText            SnmpAdminString
+        }
+
+docsDevEvIndex OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Provides relative ordering of the objects in the event
+             log.  This object will always increase except when
+             (a) the log is reset via docsDevEvControl,
+             (b) the device reboots and does not implement
+             non-volatile storage for this log, or (c) it reaches
+             the value 2^31.  The next entry for all the above
+             cases is 1."
+        ::= { docsDevEventEntry 1 }
+
+docsDevEvFirstTime OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of docsDevDateTime at the time this entry was
+             created."
+        ::= { docsDevEventEntry 2 }
+
+docsDevEvLastTime OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "When an entry reports only one event, this object will
+             have the same value as the corresponding instance of
+             docsDevEvFirstTime.  When an entry reports multiple
+             events, this object will record the value that
+             docsDevDateTime had when the most recent event for this
+             entry occurred."
+        ::= { docsDevEventEntry 3 }
+
+-- This object was renamed from docsDevEvCount to meet naming
+-- requirements for Counter32
+docsDevEvCounts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "events"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of consecutive event instances reported by
+             this entry.  This starts at 1 with the creation of this
+             row and increments by 1 for each subsequent duplicate
+             event."
+        ::= { docsDevEventEntry 4 }
+docsDevEvLevel OBJECT-TYPE
+        SYNTAX INTEGER {
+            emergency(1),
+            alert(2),
+            critical(3),
+            error(4),
+            warning(5),
+            notice(6),
+            information(7),
+            debug(8)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The priority level of this event, as defined by the
+             vendor.  These are ordered from most serious (emergency)
+             to least serious (debug).
+
+             emergency(1) events indicate vendor-specific fatal
+             hardware or software errors that prevent normal system
+             operation.
+
+             alert(2) events indicate a serious failure that causes
+             the reporting system to reboot but that is not caused by
+             hardware or software malfunctioning.
+
+             critical(3) events indicate a serious failure that
+             requires attention and prevents the device from
+             transmitting data but that could be recovered without
+             rebooting the system.
+
+             error(4) and warning(5) events indicate that a failure
+             occurred that could interrupt the normal data flow but
+             that does not cause the device to re-register.
+
+             notice(6) and information(7) events indicate a
+             milestone or checkpoint in normal operation that could
+             be of particular importance for troubleshooting.
+
+             debug(8) events are reserved for vendor-specific
+
+             events.
+
+             During normal operation, no event more
+             critical than notice(6) should be generated.  Events
+             between warning and emergency should be generated at
+             appropriate levels of problems (e.g., emergency when the
+             box is about to crash)."
+        ::= { docsDevEventEntry 5 }
+
+--
+-- It is strongly recommended that implementors follow the CableLabs
+-- enumerations for docsDevEvId, per the DOCSIS OSSIv1.1 spec
+-- and follow-on specifications.
+--
+
+docsDevEvId OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "For this product, uniquely identifies the type of event
+             that is reported by this entry."
+        REFERENCE
+            "DOCSIS OSSI 1.1 Specification, Appendix H and
+             DOCSIS OSSI 2.0 Specification, Annex D."
+        ::= { docsDevEventEntry 6 }
+
+docsDevEvText OBJECT-TYPE
+        SYNTAX      SnmpAdminString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Provides a human-readable description of the event,
+             including all relevant context (interface numbers,
+             etc.)."
+        ::= { docsDevEventEntry 7 }
+
+docsDevEvSyslogAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The type of address of docsDevEvSyslogAddress.  If
+             no syslog server exists, this value should return
+             unknown(0)."
+        DEFVAL { unknown }
+        ::= { docsDevEvent 9 }
+
+docsDevEvSyslogAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The Internet address of the Syslog server, as provided
+             by DHCP option 7 or set via SNMP management.  If the
+             address of the server is set to the zero-length
+             string, the 0.0.0.0 IPv4 address, or the 0: IPv6
+             address, Syslog transmission is inhibited.
+
+             Note that if multiple values are provided to the CM in
+             DHCP option 7, the value of this MIB object MUST be the
+             first Syslog server address received.
+
+             By default at agent boot, this object returns the zero
+             length string."
+        ::= { docsDevEvent 10 }
+
+docsDevEvThrottleThresholdExceeded OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "If true(1), trap and syslog transmission is currently
+             inhibited due to exceeding the trap/syslog event
+             threshold in the current interval."
+        ::= { docsDevEvent 11 }
+
+--
+-- Link Level Control Filtering
+--
+
+docsDevFilter OBJECT IDENTIFIER ::= { docsDevMIBObjects 6 }
+
+docsDevFilterLLCUnmatchedAction OBJECT-TYPE
+        SYNTAX INTEGER {
+            discard(1),
+            accept(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "LLC (Link Level Control) filters can be defined on an
+             inclusive or exclusive basis: CMs can be configured to
+             forward only packets matching a set of layer three
+             protocols, or to drop packets matching a set of layer
+             three protocols.  Typical use of these filters is to
+
+             filter out possibly harmful (given the context of a
+             large metropolitan LAN) protocols.
+
+             If set to discard(1), any L2 packet that does not match
+             at least one filter in the docsDevFilterLLCTable will be
+             discarded.  If set to accept(2), any L2 packet that
+             does not match at least one filter in the
+             docsDevFilterLLCTable will be accepted for further
+             processing (e.g., bridging).  In other words, if the
+             packet does not match an entry in the table, it takes
+             this action; if it does match an entry in the table, it
+             takes the opposite of this action."
+        DEFVAL { accept }
+        ::= { docsDevFilter 1 }
+
+docsDevFilterLLCTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevFilterLLCEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A list of filters to apply to (bridged) LLC
+             traffic.  The filters in this table are applied to
+             incoming traffic on the appropriate interface(s)  prior
+             to any further processing (e.g., before the packet
+             is handed off for level 3 processing, or for bridging).
+             The specific action taken when no filter is matched is
+             controlled by docsDevFilterLLCUnmatchedAction.  Table
+             entries MUST NOT persist across reboots for any device."
+        ::= { docsDevFilter 2 }
+
+docsDevFilterLLCEntry OBJECT-TYPE
+        SYNTAX      DocsDevFilterLLCEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Describes a single filter to apply to (bridged) LLC
+             traffic received on a specified interface. "
+        INDEX { docsDevFilterLLCIndex }
+        ::= { docsDevFilterLLCTable 1 }
+
+DocsDevFilterLLCEntry ::= SEQUENCE {
+            docsDevFilterLLCIndex               Integer32,
+            docsDevFilterLLCStatus              RowStatus,
+            docsDevFilterLLCIfIndex             InterfaceIndexOrZero,
+            docsDevFilterLLCProtocolType        INTEGER,
+            docsDevFilterLLCProtocol            Integer32,
+            docsDevFilterLLCMatches             Counter32
+        }
+
+docsDevFilterLLCIndex OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Index used for the identification of filters (note that
+             LLC filter order is irrelevant)."
+        ::= { docsDevFilterLLCEntry 1 }
+docsDevFilterLLCStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Controls and reflects the status of rows in this
+             table.  There is no restriction on changing any of the
+             associated columns for this row while this object is set
+             to active.
+
+             Specifying only this object (with the
+             appropriate index) on a CM is sufficient to create a
+             filter row that matches all inbound packets on the
+             ethernet interface and results in the packets being
+             discarded.  docsDevFilterLLCIfIndex (at least) must be
+             specified on a CMTS to create a row."
+        ::= { docsDevFilterLLCEntry 2}
+
+docsDevFilterLLCIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndexOrZero
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The entry interface to which this filter applies.  The
+             value corresponds to ifIndex for either a CATV MAC or
+             another network interface.  If the value is zero, the
+             filter applies to all interfaces.  In Cable Modems, the
+             default value is the customer side interface(s).  In
+             CMTSs, this object has to be specified to
+             create a row in this table.
+
+             Note that according to the DOCSIS OSSIv1.1
+             specification, ifIndex '1' in the CM means that this
+             row applies to all Cable Modem-to-CPE Interfaces
+             (CMCI)."
+        REFERENCE
+            "DOCSIS OSSI 1.1 Specification, Section 3.3.4.1. and
+             DOCSIS OSSI 2.0 Specification, Section 6.3.4.1."
+        ::= { docsDevFilterLLCEntry 3 }
+
+docsDevFilterLLCProtocolType OBJECT-TYPE
+        SYNTAX INTEGER {
+            ethertype(1),
+            dsap(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The format of the value in docsDevFilterLLCProtocol:
+             either a two-byte Ethernet Ethertype, or a one-byte
+             802.2 Service Access Point (SAP) value.  ethertype(1)
+             also applies to Standard Network Access Protocol
+             (SNAP) encapsulated frames."
+        DEFVAL { ethertype }
+        ::= { docsDevFilterLLCEntry 4 }
+
+docsDevFilterLLCProtocol OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The layer-three protocol for which this filter applies.
+             The protocol value format depends on
+             docsDevFilterLLCProtocolType.  Note that for SNAP
+             frames, ethertype filtering is performed rather than
+             Destination Service Access Point (DSAP) =0xAA."
+        DEFVAL { 0 }
+        ::= { docsDevFilterLLCEntry 5 }
+
+docsDevFilterLLCMatches OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "matches"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Counts the number of times this filter was matched."
+        ::= { docsDevFilterLLCEntry 6 }
+
+--
+-- IPv4 Filtering
+--
+
+docsDevFilterIpDefault OBJECT-TYPE
+        SYNTAX INTEGER {
+            discard(1),
+            accept(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      deprecated
+        DESCRIPTION
+            "The default behavior for (bridged) packets that do not
+             match IP filters (or Internet filters, if implemented)
+             is defined by docsDevFilterIpDefault.
+
+             If set to discard(1), all packets not matching an IP
+             filter in docsDevFilterIpTable will be discarded.  If
+             set to accept(2), all packets not matching an IP filter
+             or an Internet filter will be accepted for further
+             processing (e.g., bridging)."
+        DEFVAL { accept }
+        ::= { docsDevFilter 3 }
+
+docsDevFilterIpTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevFilterIpEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "An ordered list of filters or classifiers to apply to
+             IP traffic.  Filter application is ordered by the filter
+             index, rather than by a best match algorithm (note that
+             this implies that the filter table may have gaps in the
+             index values).  Packets that match no filters will have
+             policy 0 in the docsDevFilterPolicyTable applied to
+             them, if it exists.  Otherwise, Packets that match no
+             filters are discarded or forwarded according to the
+             setting of docsDevFilterIpDefault.
+
+             Any IP packet can theoretically match multiple rows of
+             this table.  When considering a packet, the table is
+             scanned in row index order (e.g., filter 10 is checked
+             before filter 20).  If the packet matches that filter
+             (which means that it matches ALL criteria for that row),
+             actions appropriate to docsDevFilterIpControl and
+             docsDevFilterPolicyId are taken.  If the packet was
+             discarded processing is complete.  If
+             docsDevFilterIpContinue is set to true, the filter
+             comparison continues with the next row in the table,
+             looking for additional matches.
+
+             If the packet matches no filter in the table, the packet
+             is accepted or dropped for further processing
+             according to the setting of docsDevFilterIpDefault.
+             If the packet is accepted, the actions specified by
+             policy group 0 (e.g., the rows in
+             docsDevFilterPolicyTable that have a value of 0 for
+             docsDevFilterPolicyId) are taken, if that policy
+
+             group exists.
+
+             Logically, this table is consulted twice during the
+             processing of any IP packet: once upon its acceptance
+             from the L2 entity, and once upon its transmission to
+             the L2 entity.  In actuality, for cable modems, IP
+             filtering is generally the only IP processing done for
+             transit traffic.  This means that inbound and outbound
+             filtering can generally be done at the same time with
+             one pass through the filter table.
+
+             The objects in this table are only accessible from cable
+             devices that are not operating in DiffServ MIB mode
+             (RFC 3289).  See the conformance section for details.
+
+             Note that some devices are required by other
+             specifications (e.g., the DOCSIS OSSIv1.1 specification)
+             to support the legacy SNMPv1/v2c docsDevFilter mode
+             for backward compatibility.
+
+             Table entries MUST NOT persist across reboots for any
+             device.
+
+             This table is deprecated.  Instead, use the DiffServ MIB
+             from RFC 3289."
+        ::= { docsDevFilter 4 }
+
+docsDevFilterIpEntry OBJECT-TYPE
+        SYNTAX      DocsDevFilterIpEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "Describes a filter to apply to IP traffic received on a
+             specified interface.  All identity objects in this table
+             (e.g., source and destination address/mask, protocol,
+             source/dest port, TOS/mask, interface and direction)
+             must match their respective fields in the packet for
+             any given filter to match.
+
+             To create an entry in this table, docsDevFilterIpIfIndex
+             must be specified."
+        INDEX { docsDevFilterIpIndex }
+        ::= { docsDevFilterIpTable 1 }
+
+DocsDevFilterIpEntry ::= SEQUENCE {
+            docsDevFilterIpIndex             Integer32,
+            docsDevFilterIpStatus            RowStatus,
+            docsDevFilterIpControl           INTEGER,
+            docsDevFilterIpIfIndex           InterfaceIndexOrZero,
+            docsDevFilterIpDirection         INTEGER,
+            docsDevFilterIpBroadcast         TruthValue,
+            docsDevFilterIpSaddr             IpAddress,
+            docsDevFilterIpSmask             IpAddress,
+            docsDevFilterIpDaddr             IpAddress,
+            docsDevFilterIpDmask             IpAddress,
+            docsDevFilterIpProtocol          Integer32,
+            docsDevFilterIpSourcePortLow     Integer32,
+            docsDevFilterIpSourcePortHigh    Integer32,
+            docsDevFilterIpDestPortLow       Integer32,
+            docsDevFilterIpDestPortHigh      Integer32,
+            docsDevFilterIpMatches           ZeroBasedCounter32,
+            docsDevFilterIpTos               OCTET STRING,
+            docsDevFilterIpTosMask           OCTET STRING,
+            docsDevFilterIpContinue          TruthValue,
+            docsDevFilterIpPolicyId          Integer32
+        }
+
+docsDevFilterIpIndex OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "Index used to order the application of filters.
+             The filter with the lowest index is always applied
+             first."
+        ::= { docsDevFilterIpEntry 1 }
+
+docsDevFilterIpStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Controls and reflects the status of rows in this
+             table.  Specifying only this object (with the
+             appropriate index) on a CM is sufficient to create a
+             filter row that matches all inbound packets on the
+             ethernet interface and results in the packets being
+             discarded.  docsDevFilterIpIfIndex (at least) must be
+             specified on a CMTS to create a row.  Creation of the
+             rows may be done via either create-and-wait or
+             create-and-go, but the filter is not applied until this
+             object is set to (or changes to) active.  There is no
+             restriction in changing any object in a row while this
+             object is set to active."
+        ::= { docsDevFilterIpEntry 2 }
+
+docsDevFilterIpControl OBJECT-TYPE
+        SYNTAX INTEGER {
+            discard(1),
+            accept(2),
+            policy(3)
+        }
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "If set to discard(1), all packets matching this filter
+             will be discarded, and scanning of the remainder of the
+             filter list will be aborted.  If set to accept(2), all
+             packets matching this filter will be accepted for
+             further processing (e.g., bridging).  If
+             docsDevFilterIpContinue is set to true, see if there
+             are other matches; otherwise, done.  If set to
+             policy (3), execute the policy entries
+             matched by docsDevFilterIpPolicyId in
+             docsDevFilterPolicyTable.
+
+             If docsDevFilterIpContinue is set to true, continue
+             scanning the table for other matches; otherwise, done."
+        DEFVAL { discard }
+        ::= { docsDevFilterIpEntry 3 }
+
+docsDevFilterIpIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndexOrZero
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The entry interface to which this filter applies.  The
+             value corresponds to ifIndex for either a CATV MAC or
+             another interface.  If the value is zero, the
+             filter applies to all interfaces.  Default value in CMs
+             is the index of the customer-side (e.g., ethernet)
+             interface(s).  In CMTSes, this object MUST be
+             specified to create a row in this table.
+
+             Note that according to the DOCSIS OSSIv1.1
+             specification, ifIndex '1' in the Cable Modem means
+             that this row applies to all CMCI (customer-facing)
+             interfaces."
+        REFERENCE
+            "DOCSIS OSSI 1.1 Specification, Section 3.3.4.1. and
+             DOCSIS OSSI 2.0 Specification, Section 6.3.4.1."
+        ::= { docsDevFilterIpEntry 4 }
+
+docsDevFilterIpDirection OBJECT-TYPE
+        SYNTAX INTEGER {
+            inbound(1),
+            outbound(2),
+            both(3)
+        }
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Determines whether the filter is applied to inbound(1)
+             traffic, outbound(2) traffic, or traffic in both(3)
+             directions."
+        DEFVAL { inbound }
+        ::= { docsDevFilterIpEntry 5 }
+
+docsDevFilterIpBroadcast OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "If set to true(1), the filter only applies to multicast
+             and broadcast traffic.  If set to false(2), the filter
+             applies to all traffic."
+        DEFVAL { false }
+        ::= { docsDevFilterIpEntry 6 }
+
+docsDevFilterIpSaddr OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The source IP address, or portion thereof, that is to be
+             matched for this filter.  The source address is first
+             masked (ANDed) against docsDevFilterIpSmask before
+             being compared to this value.  A value of 0 for this
+             object and 0 for the mask matches all IP addresses."
+        DEFVAL { '00000000'h }
+        ::= { docsDevFilterIpEntry 7 }
+
+docsDevFilterIpSmask OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "A bit mask that is to be applied to the source address
+             prior to matching.  This mask is not necessarily the
+             same as a subnet mask, but 1s bits must be leftmost and
+             contiguous."
+        DEFVAL { '00000000'h }
+        ::= { docsDevFilterIpEntry 8 }
+
+docsDevFilterIpDaddr OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The destination IP address, or portion thereof, that is
+             to be matched for this filter.  The destination address
+             is first masked (ANDed) against docsDevFilterIpDmask
+             before being compared to this value.  A value of
+             00000000 for this object and 00000000 for the mask
+             matches all IP addresses."
+        DEFVAL { '00000000'h }
+        ::= { docsDevFilterIpEntry 9 }
+
+docsDevFilterIpDmask OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "A bit mask that is to be applied to the destination
+             address prior to matching.  This mask is not necessarily
+             the same as a subnet mask, but 1s bits MUST be leftmost
+             and contiguous."
+        DEFVAL { '00000000'h }
+        ::= { docsDevFilterIpEntry 10 }
+
+docsDevFilterIpProtocol OBJECT-TYPE
+        SYNTAX Integer32 (0..256)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The IP protocol value that is to be matched.  For
+             example, icmp is 1, tcp is 6, and udp is 17.  A value of
+             256 matches ANY protocol."
+        REFERENCE "www.iana.org/assignments/protocol-numbers"
+        DEFVAL { 256 }
+        ::= { docsDevFilterIpEntry 11 }
+
+docsDevFilterIpSourcePortLow OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This is the inclusive lower bound of the transport-layer
+             source port range that is to be matched.  If the IP
+             protocol of the packet is neither UDP nor TCP, this
+
+             object is ignored during matching."
+        REFERENCE "www.iana.org/assignments/port-numbers"
+        DEFVAL { 0 }
+        ::= { docsDevFilterIpEntry 12 }
+
+docsDevFilterIpSourcePortHigh OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This is the inclusive upper bound of the transport-layer
+             source port range that is to be matched.  If the IP
+             protocol of the packet is neither UDP nor TCP, this
+             object is ignored during matching."
+        REFERENCE "www.iana.org/assignments/port-numbers"
+        DEFVAL { 65535 }
+        ::= { docsDevFilterIpEntry 13 }
+
+docsDevFilterIpDestPortLow OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This is the inclusive lower bound of the transport-layer
+             destination port range that is to be matched.  If the IP
+             protocol of the packet is neither UDP nor TCP, this
+             object is ignored during matching."
+        REFERENCE "www.iana.org/assignments/port-numbers"
+        DEFVAL { 0 }
+        ::= { docsDevFilterIpEntry 14 }
+
+docsDevFilterIpDestPortHigh OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This is the inclusive upper bound of the transport-layer
+             destination port range that is to be matched.  If the IP
+             protocol of the packet is neither UDP nor TCP, this
+             object is ignored during matching."
+        REFERENCE "www.iana.org/assignments/port-numbers"
+        DEFVAL { 65535 }
+        ::= { docsDevFilterIpEntry 15 }
+
+docsDevFilterIpMatches OBJECT-TYPE
+        SYNTAX      ZeroBasedCounter32
+        UNITS       "matches"
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION
+            "Counts the number of times this filter was matched.
+             This object is initialized to 0 at boot, or at row
+             creation, and is reset only upon reboot."
+        ::= { docsDevFilterIpEntry 16 }
+
+docsDevFilterIpTos  OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (1))
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This is the value to be matched to the packet's
+             TOS (Type of Service) value (after the TOS value
+             is ANDed with docsDevFilterIpTosMask).  A value for this
+             object of 0 and a mask of 0 matches all TOS values."
+        DEFVAL { '00'h }
+        ::= { docsDevFilterIpEntry 17 }
+
+docsDevFilterIpTosMask OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (1))
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The mask to be applied to the packet's TOS value before
+             matching."
+        DEFVAL { '00'h }
+        ::= { docsDevFilterIpEntry 18 }
+
+docsDevFilterIpContinue OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "If this value is set to true and docsDevFilterIpControl
+             is anything but discard (1), continue scanning and
+             applying policies.  See Section 3.3.3 for more
+             details."
+        DEFVAL { false }
+        ::= { docsDevFilterIpEntry 19 }
+
+docsDevFilterIpPolicyId OBJECT-TYPE
+        SYNTAX      Integer32 (0..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This object points to an entry in
+             docsDevFilterPolicyTable.  If docsDevFilterIpControl
+
+             is set to policy (3), execute all matching policies
+             in docsDevFilterPolicyTable.  If no matching policy
+             exists, treat as if docsDevFilterIpControl were set
+             to accept (1).  If this object is set to the value of
+             0, there is no matching policy, and
+             docsDevFilterPolicyTable MUST NOT be consulted."
+        DEFVAL { 0 }
+        ::= { docsDevFilterIpEntry 20 }
+
+--
+-- Policy Mapping Table
+--
+
+docsDevFilterPolicyTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevFilterPolicyEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "A Table that maps between a policy group ID and a set
+             of pointers to policies to be applied.  All rows with
+             the same docsDevFilterPolicyId are part of the same
+             group of policy pointers and are applied in the order
+             in this table.  docsDevFilterPolicyTable exists to
+             allow multiple policy actions (referenced by policy
+             pointers) to be applied to any given classified packet.
+             The policy actions are applied in index order.
+             For example:
+
+             Index   ID    Type    Action
+              1      1      TOS     1
+              9      5      TOS     1
+              12     1      IPSEC   3
+
+             This says that a packet that matches a filter with
+             policy id 1 first has TOS policy 1 applied (which might
+             set the TOS bits to enable a higher priority) and next
+             has the IPSEC policy 3 applied (which may result in the
+             packets being dumped into a secure VPN to a remote
+             encryptor).
+
+             Policy ID 0 is reserved for default actions and is
+             applied only to packets that match no filters in
+             docsDevFilterIpTable.
+
+             Table entries MUST NOT persist across reboots for any
+             device.
+
+             This table is deprecated.  Instead, use the DiffServ MIB
+
+             from RFC 3289."
+        ::= { docsDevFilter 5 }
+
+docsDevFilterPolicyEntry OBJECT-TYPE
+        SYNTAX      DocsDevFilterPolicyEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "An entry in the docsDevFilterPolicyTable.  Entries are
+             created by Network Management.  To create an entry,
+             docsDevFilterPolicyId MUST be specified."
+        INDEX { docsDevFilterPolicyIndex }
+        ::= { docsDevFilterPolicyTable 1 }
+
+DocsDevFilterPolicyEntry ::= SEQUENCE {
+            docsDevFilterPolicyIndex   Integer32,
+            docsDevFilterPolicyId      Integer32,
+--          docsDevFilterPolicyType    INTEGER,
+--          docsDevFilterPolicyAction  Integer32,
+            docsDevFilterPolicyStatus  RowStatus,
+            docsDevFilterPolicyPtr     RowPointer
+        }
+
+docsDevFilterPolicyIndex OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION "Index value for the table."
+        ::= { docsDevFilterPolicyEntry 1 }
+
+docsDevFilterPolicyId OBJECT-TYPE
+        SYNTAX      Integer32 (0..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Policy ID for this entry.  If a policy ID can apply to
+             multiple rows of this table, all relevant policies are
+             executed.  Policy 0 (if populated) is applied to all
+             packets that do not match any of the filters.  N.B. If
+             docsDevFilterIpPolicyId is set to 0, it DOES NOT match
+             policy 0 of this table."
+        ::= { docsDevFilterPolicyEntry 2 }
+
+-- The following two objects were removed and never used; however,
+-- to preserve OID numbering, they are simply commented out to
+-- to ensure that they are not used again.
+-- docsDevFilterPolicyType ::= { docsDevFilterPolicyEntry 3 }
+-- docsDevFilterPolicyAction ::= { docsDevFilterPolicyEntry 4 }
+
+docsDevFilterPolicyStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "Object used to create an entry in this table.  There is
+             no restriction in changing any object in a row while
+             this object is set to active.
+             The following object MUST have a valid value before this
+             object can be set to active:  docsDevFilterPolicyPtr."
+        ::= { docsDevFilterPolicyEntry 5 }
+
+docsDevFilterPolicyPtr OBJECT-TYPE
+        SYNTAX      RowPointer
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This object points to a row in an applicable filter
+             policy table.  Currently, the only standard policy
+             table is docsDevFilterTosTable.
+
+             Per the textual convention, this object points to the
+             first accessible object in the row; e.g., to point to a
+             row in docsDevFilterTosTable with an index of 21, the
+             value of this object would be the object identifier
+             docsDevTosStatus.21.
+
+             Vendors are recommended to adhere to the same convention
+             when adding vendor-specific policy table extensions.
+
+             If this pointer references an empty or non-existent
+             row, then no policy action is taken.
+
+             The default upon row creation is a null pointer that
+             results in no policy action being taken."
+        DEFVAL { zeroDotZero }
+        ::= { docsDevFilterPolicyEntry 6 }
+
+--
+-- TOS Policy action table
+--
+
+docsDevFilterTosTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevFilterTosEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "Table used to describe Type of Service (TOS) bits
+
+             processing.
+
+             This table is an adjunct to the docsDevFilterIpTable
+             and the docsDevFilterPolicy table.  Entries in the
+             latter table can point to specific rows in this (and
+             other) tables and cause specific actions to be taken.
+             This table permits the manipulation of the value of the
+             Type of Service bits in the IP header of the matched
+             packet as follows:
+
+             Set the tosBits of the packet to
+                (tosBits & docsDevFilterTosAndMask) |
+                docsDevFilterTosOrMask
+
+             This construct allows you to do a clear and set of all
+             the TOS bits in a flexible manner.
+
+             Table entries MUST NOT persist across reboots for any
+             device.
+
+             This table is deprecated.  Instead, use the DiffServ MIB
+             from RFC 3289."
+        ::= { docsDevFilter 6 }
+
+docsDevFilterTosEntry OBJECT-TYPE
+        SYNTAX      DocsDevFilterTosEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "A TOS policy entry."
+        INDEX { docsDevFilterTosIndex }
+        ::= { docsDevFilterTosTable 1 }
+
+DocsDevFilterTosEntry ::= SEQUENCE {
+            docsDevFilterTosIndex   Integer32,
+            docsDevFilterTosStatus  RowStatus,
+            docsDevFilterTosAndMask OCTET STRING,
+            docsDevFilterTosOrMask  OCTET STRING
+        }
+
+docsDevFilterTosIndex OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "The unique index for this row.  There are no ordering
+             requirements for this table, and any valid index may be
+             specified."
+        ::= { docsDevFilterTosEntry 1 }
+
+docsDevFilterTosStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "The object used to create and delete entries in this
+             table.  A row created by specifying just this object
+             results in a row that specifies no change to the TOS
+             bits.  A row may be created using either the
+             create-and-go or create-and-wait paradigms.  There is
+             no restriction on the ability to change values in this
+             row while the row is active."
+        ::= { docsDevFilterTosEntry 2 }
+
+docsDevFilterTosAndMask OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (1))
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This value is bitwise ANDed with the matched packet's
+             TOS bits."
+        DEFVAL { 'ff'h }
+        ::= { docsDevFilterTosEntry 3 }
+
+docsDevFilterTosOrMask OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE (1))
+        MAX-ACCESS  read-create
+        STATUS      deprecated
+        DESCRIPTION
+            "This value is bitwise ORed with the result from the
+             AND procedure (tosBits & docsDevFilterTosAndMask).
+             The result then replaces the packet's TOS bits."
+        DEFVAL { '00'h }
+        ::= { docsDevFilterTosEntry 4 }
+
+--
+-- CPE IP Management and anti-spoofing group.  Only implemented on
+-- Cable Modems.
+--
+
+docsDevCpe OBJECT IDENTIFIER ::= { docsDevMIBObjects 7 }
+
+docsDevCpeEnroll OBJECT-TYPE
+        SYNTAX      INTEGER {
+            none(1),
+            any(2)
+
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object controls the population of
+             docsDevFilterCpeTable.
+             If set to none, the filters must be set manually
+             by a network management action (either configuration
+             or SNMP set).
+             If set to any, the CM wiretaps the packets originating
+             from the ethernet and enrolls up to docsDevCpeIpMax
+             addresses as based on the source IPv4 or v6 addresses of
+             those packets."
+        DEFVAL { any }
+        ::= { docsDevCpe 1 }
+
+docsDevCpeIpMax OBJECT-TYPE
+        SYNTAX      Integer32 (-1..2147483647)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object controls the maximum number of CPEs allowed
+             to be learned behind this device.  If set to zero, any
+             number of CPEs may connect up to the maximum permitted
+             for the device.
+             If set to -1, no filtering is done on CPE source
+             addresses, and no entries are made in the
+             docsDevFilterCpeTable via learning.  If an attempt is
+             made to set this to a number greater than that
+             permitted for the device, it is set to that maximum."
+        DEFVAL { -1 }
+        ::= { docsDevCpe 2 }
+
+docsDevCpeTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevCpeEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "This table lists the IPv4 addresses seen (or permitted)
+             as source addresses in packets originating from the
+             customer interface on this device.  In addition, this
+             table can be provisioned with the specific addresses
+             permitted for the CPEs via the normal row creation
+             mechanisms.  Table entries MUST NOT persist across
+             reboots for any device.
+
+             N.B.  Management action can add entries in this table
+             and in docsDevCpeIpTable past the value of
+
+             docsDevCpeIpMax.  docsDevCpeIpMax ONLY restricts the
+             ability of the CM to add learned addresses
+             automatically.
+
+             This table is deprecated and is replaced by
+             docsDevCpeInetTable."
+        ::= { docsDevCpe 3 }
+
+docsDevCpeEntry OBJECT-TYPE
+        SYNTAX      DocsDevCpeEntry
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "An entry in the docsDevFilterCpeTable.  There is one
+             entry for each IPv4 CPE seen or provisioned.  If
+             docsDevCpeIpMax is set to -1, this table is ignored;
+             otherwise, upon receipt of an IP packet from the
+             customer interface of the CM, the source IP address is
+             checked against this table.  If the address is in the
+             table, packet processing continues.  If the address is
+             not in the table but docsDevCpeEnroll is set to any
+             and the sum of the table sizes of docsDevCpeTable and
+             docsDevCpeInetTable is less than docsDevCpeIpMax, the
+             address is added to the table, and packet processing
+             continues.  Otherwise, the packet is dropped.
+
+             The filtering actions specified by this table occur
+             after any LLC filtering (docsDevFilterLLCTable), but
+             prior to any IP filtering (docsDevFilterIpTable,
+             docsDevNmAccessTable)."
+        INDEX   { docsDevCpeIp }
+        ::= {docsDevCpeTable 1 }
+
+DocsDevCpeEntry ::= SEQUENCE {
+            docsDevCpeIp      IpAddress,
+            docsDevCpeSource  INTEGER,
+            docsDevCpeStatus  RowStatus
+        }
+
+docsDevCpeIp OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      deprecated
+        DESCRIPTION
+            "The IPv4 address to which this entry applies.
+
+             N.B.  Attempts to set all zeros or all ones address
+             values MUST be rejected."
+        ::= { docsDevCpeEntry 1 }
+
+docsDevCpeSource OBJECT-TYPE
+        SYNTAX      INTEGER {
+            other(1),
+            manual(2),
+            learned(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION
+            "This object describes how this entry was created.  If
+             the value is manual(2), this row was created by a
+             network management action (either configuration or
+             SNMP set).  If set to learned(3), then it was found via
+             looking at the source IPv4 address of a received packet.
+             The value other(1) is used for any entries that do not
+             meet manual(2) or learned(3) criteria."
+        ::= { docsDevCpeEntry 2 }
+
+docsDevCpeStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  deprecated
+        DESCRIPTION
+            "Standard object to manipulate rows.  To create a row in
+             this table, one only needs to specify this object.
+             Management stations SHOULD use the create-and-go
+             mechanism for creating rows in this table."
+        ::= { docsDevCpeEntry 3 }
+
+--
+-- Internet CPE Management and anti spoofing group, for support of
+-- non-IPv4 CPEs.
+--
+
+docsDevCpeInetTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF DocsDevCpeInetEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table lists the IP addresses seen (or permitted) as
+             source addresses in packets originating from the
+             customer interface on this device.  In addition, this
+             table can be provisioned with the specific addresses
+             permitted for the CPEs via the normal row creation
+             mechanisms.
+
+             N.B.  Management action can add entries in this table
+             and in docsDevCpeIpTable past the value of
+             docsDevCpeIpMax.  docsDevCpeIpMax ONLY restricts the
+             ability of the CM to add learned addresses
+             automatically.
+
+             Table entries MUST NOT persist across reboots for any
+             device.
+
+             This table exactly mirrors docsDevCpeTable and applies
+             to IPv4 and IPv6 addresses."
+        ::= { docsDevCpe 4 }
+
+docsDevCpeInetEntry OBJECT-TYPE
+        SYNTAX      DocsDevCpeInetEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the docsDevFilterCpeInetTable.  There is one
+             entry for each IP CPE seen or provisioned.  If
+             docsDevCpeIpMax is set to -1, this table is ignored;
+             otherwise, upon receipt of an IP packet from the
+             customer interface of the CM, the source IP address is
+             checked against this table.  If the address is in the
+             table, packet processing continues.  If the address is
+             not in the table but docsDevCpeEnroll is set to any and
+             the sum of the table sizes for docsDevCpeTable and
+             docsDevCpeInetTable is less than docsDevCpeIpMax, the
+             address is added to the table, and packet processing
+             continues.  Otherwise, the packet is dropped.
+
+             The filtering actions specified by this table occur
+             after any LLC filtering (docsDevFilterLLCTable), but
+             prior to any IP filtering (docsDevFilterIpTable,
+             docsDevNmAccessTable).
+
+             When an agent (cable modem) restarts, then all
+             dynamically created rows are lost."
+        INDEX   { docsDevCpeInetType, docsDevCpeInetAddr }
+        ::= { docsDevCpeInetTable 1 }
+
+DocsDevCpeInetEntry ::= SEQUENCE {
+            docsDevCpeInetType      InetAddressType,
+            docsDevCpeInetAddr      InetAddress,
+            docsDevCpeInetSource    INTEGER,
+            docsDevCpeInetRowStatus RowStatus
+        }
+
+docsDevCpeInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The type of internet address of docsDevCpeInetAddr."
+         ::= { docsDevCpeInetEntry 1 }
+
+docsDevCpeInetAddr OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Internet address to which this entry applies.
+
+             Implementors need to be aware that if the size of
+             docsDevCpeInetAddr exceeds 114 octets OIDs of
+             instances of columns in this row will have more
+             than 128 sub-identifiers and cannot be accessed
+             using SNMPv1, SNMPv2c, or SNMPv3.  Only unicast
+             address are allowed for this object."
+        ::= { docsDevCpeInetEntry 2 }
+
+docsDevCpeInetSource OBJECT-TYPE
+        SYNTAX      INTEGER {
+            manual(2),
+            learned(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object describes how this entry was created.  If
+             the value is manual(2), this row was created by a
+             network management action (either configuration or
+             SNMP set).  If set to learned(3), then it was found
+             via looking at the source IP address of a received
+             packet."
+        ::= { docsDevCpeInetEntry 3 }
+
+docsDevCpeInetRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "Standard object to manipulate rows.  To create a row in
+             this table, one only needs to specify this object.
+             Management stations SHOULD use the create-and-go
+             mechanism for creating rows in this table."
+        ::= { docsDevCpeInetEntry 4 }
+
+--
+-- Placeholder for notifications/traps.
+--
+
+-- erroneous, DO NOT USE docsDevNotification
+docsDevNotification OBJECT IDENTIFIER   ::= { docsDev 2 }
+-- erroneous, DO NOT USE docsDevNotification
+
+docsDevNotifications OBJECT IDENTIFIER   ::= { docsDev 0 }
+
+--
+-- RFC 2669 Conformance definitions
+--
+
+docsDevConformance  OBJECT IDENTIFIER   ::= { docsDev 3 }
+docsDevGroups       OBJECT IDENTIFIER   ::= { docsDevConformance 1 }
+docsDevCompliances  OBJECT IDENTIFIER   ::= { docsDevConformance 2 }
+
+docsDevBasicCompliance MODULE-COMPLIANCE
+        STATUS  deprecated
+        DESCRIPTION
+            "The RFC 2669 compliance statement for MCNS/DOCSIS
+             Cable Modems and Cable Modem Termination Systems."
+
+MODULE  -- docsDev
+
+-- conditionally mandatory groups
+
+GROUP docsDevBaseGroup
+        DESCRIPTION
+            "Mandatory in Cable Modems, optional in Cable Modem
+             Termination Systems."
+
+GROUP docsDevEventGroup
+        DESCRIPTION
+            "Mandatory in Cable Modems, optional in Cable Modem
+             Termination Systems."
+
+GROUP docsDevFilterGroup
+        DESCRIPTION
+            "Mandatory in Cable Modems, optional in Cable Modem
+             Termination Systems."
+
+GROUP docsDevNmAccessGroup
+        DESCRIPTION
+            "This group is only implemented in devices that do not
+             implement the SNMPv3 User Security Model.  It SHOULD NOT
+             be implemented by devices that conform to SNMPv3.
+
+             For devices that do not implement SNMPv3 or later, this
+             group is Mandatory in Cable Modems and is optional
+             in Cable Modem Termination Systems."
+
+GROUP docsDevServerGroup
+        DESCRIPTION
+            "This group is implemented only in Cable Modems, and is
+             not implemented in Cable Modem Termination Systems."
+
+GROUP docsDevSoftwareGroup
+        DESCRIPTION
+            "This group is Mandatory in Cable Modems and optional in
+             Cable Modem Termination Systems."
+
+GROUP docsDevCpeGroup
+        DESCRIPTION
+            "This group is Mandatory in Cable Modems, and is
+             not implemented in Cable Modem Termination Systems."
+
+OBJECT docsDevSTPControl
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "It is compliant to implement this object as read-only.
+             Devices need only support noStFilterBpdu(2)."
+
+OBJECT docsDevNmAccessIp
+        DESCRIPTION
+            "It is compliant to recognize the IP address
+             255.255.255.255 as referring to any NMS."
+
+OBJECT docsDevEvReporting
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support local(0).  An agent need not
+              enforce that trap or syslog logging be accompanied
+              by local(0) or localVolatile(3) logging."
+         ::= { docsDevCompliances 1 }
+
+docsDevBaseGroup OBJECT-GROUP
+        OBJECTS {
+             docsDevRole,
+             docsDevDateTime,
+             docsDevResetNow,
+             docsDevSerialNumber,
+             docsDevSTPControl
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing device status and
+             control."
+        ::= { docsDevGroups 1 }
+
+docsDevNmAccessGroup OBJECT-GROUP
+        OBJECTS {
+             docsDevNmAccessIp,
+             docsDevNmAccessIpMask,
+             docsDevNmAccessCommunity,
+             docsDevNmAccessControl,
+             docsDevNmAccessInterfaces,
+             docsDevNmAccessStatus
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "A collection of objects for controlling access to SNMP
+             objects on cable devices.
+
+             This group has been deprecated because all the
+             objects have been deprecated in favor of SNMPv3 and
+             Coexistence MIBs."
+        ::= { docsDevGroups 2 }
+
+docsDevSoftwareGroup OBJECT-GROUP
+        OBJECTS {
+            docsDevSwServer,
+            docsDevSwFilename,
+            docsDevSwAdminStatus,
+            docsDevSwOperStatus,
+            docsDevSwCurrentVers
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "A collection of objects for controlling software
+             downloads.
+
+             This group has been deprecated and replaced by
+             docsDevSoftwareGroupV2.  Object docsDevSwServer
+             has been replaced by docsDevSwServerAddressType
+             and docsDevSwServerAddress, and
+             docsDevSwServerTransportProtocol has been added to
+             support TFTP and HTTP firmware downloads."
+        ::= { docsDevGroups 3 }
+
+docsDevServerGroup OBJECT-GROUP
+        OBJECTS {
+            docsDevServerBootState,
+            docsDevServerDhcp,
+            docsDevServerTime,
+            docsDevServerTftp,
+            docsDevServerConfigFile
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "A collection of objects providing status about server
+             provisioning.
+
+             This group has been deprecated and replaced by
+             docsDevServerGroupV2.  The objects docsDevServerDhcp,
+             docsDevServerTime, and docsDevServerTftp have
+             been replaced by docsDevServerDhcpAddressType,
+             docsDevServerDhcpAddress, docsDevServerTimeAddressType,
+             docsDevServerTimeAddress,
+             docsDevServerConfigTftpAddressType, and
+             docsDevServerConfigTftpAddress."
+        ::= { docsDevGroups 4 }
+
+docsDevEventGroup OBJECT-GROUP
+        OBJECTS {
+            docsDevEvControl,
+            docsDevEvSyslog,
+            docsDevEvThrottleAdminStatus,
+            docsDevEvThrottleInhibited,
+            docsDevEvThrottleThreshold,
+            docsDevEvThrottleInterval,
+            docsDevEvReporting,
+            docsDevEvFirstTime,
+            docsDevEvLastTime,
+            docsDevEvCounts,
+            docsDevEvLevel,
+            docsDevEvId,
+            docsDevEvText
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "A collection of objects used to control and monitor
+             events.
+
+             This group has been deprecated and replaced by
+             docsDevEventGroupV2.  The object docsDevEvSyslog has
+
+             been replaced by docsDevEvSyslogAddressType and
+             docsDevEvSyslogAddress, and docsDevEvThrottleInhibited
+             has been replaced by
+             docsDevEvThrottleThresholdExceeded."
+        ::= { docsDevGroups 5 }
+
+docsDevFilterGroup OBJECT-GROUP
+        OBJECTS {
+            docsDevFilterLLCUnmatchedAction,
+            docsDevFilterIpDefault,
+            docsDevFilterLLCStatus,
+            docsDevFilterLLCIfIndex,
+            docsDevFilterLLCProtocolType,
+            docsDevFilterLLCProtocol,
+            docsDevFilterLLCMatches,
+            docsDevFilterIpControl,
+            docsDevFilterIpIfIndex,
+            docsDevFilterIpStatus,
+            docsDevFilterIpDirection,
+            docsDevFilterIpBroadcast,
+            docsDevFilterIpSaddr,
+            docsDevFilterIpSmask,
+            docsDevFilterIpDaddr,
+            docsDevFilterIpDmask,
+            docsDevFilterIpProtocol,
+            docsDevFilterIpSourcePortLow,
+            docsDevFilterIpSourcePortHigh,
+            docsDevFilterIpDestPortLow,
+            docsDevFilterIpDestPortHigh,
+            docsDevFilterIpMatches,
+            docsDevFilterIpTos,
+            docsDevFilterIpTosMask,
+            docsDevFilterIpContinue,
+            docsDevFilterIpPolicyId,
+            docsDevFilterPolicyId,
+            docsDevFilterPolicyStatus,
+            docsDevFilterPolicyPtr,
+            docsDevFilterTosStatus,
+            docsDevFilterTosAndMask,
+            docsDevFilterTosOrMask
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "A collection of objects to specify filters at the link
+             layer and IPv4 layer.
+
+             This group has been deprecated and replaced by various
+             groups from the DiffServ MIB."
+        ::= { docsDevGroups 6 }
+
+docsDevCpeGroup OBJECT-GROUP
+        OBJECTS {
+           docsDevCpeEnroll,
+           docsDevCpeIpMax,
+           docsDevCpeSource,
+           docsDevCpeStatus
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "A collection of objects used to control the number
+             and specific values of IPv4 addresses allowed for
+             associated Customer Premises Equipment (CPE).
+
+             This group has been deprecated and replaced by
+             docsDevInetCpeGroup.  The object docsDevCpeSource has
+             been replaced by docsDevCpeInetSource, and
+             docsDevCpeStatus has been replaced by
+             docsDevCpeInetRowStatus."
+        ::= { docsDevGroups 7 }
+
+--
+-- RFC 4639 Conformance definitions
+--
+
+docsDevGroupsV2       OBJECT IDENTIFIER  ::= { docsDevConformance 3 }
+docsDevCompliancesV2  OBJECT IDENTIFIER  ::= { docsDevConformance 4 }
+
+docsDevCmCompliance MODULE-COMPLIANCE
+         STATUS  current
+         DESCRIPTION
+             "The compliance statement for DOCSIS Cable Modems.
+
+              This compliance statement applies to implementations
+              of DOCSIS versions that are not IPv6 capable."
+
+MODULE DIFFSERV-MIB -- RFC 3289
+
+MANDATORY-GROUPS {
+           diffServMIBDataPathGroup,
+           diffServMIBClfrGroup,
+           diffServMIBClfrElementGroup,
+           diffServMIBMultiFieldClfrGroup,
+           diffServMIBActionGroup,
+           diffServMIBDscpMarkActGroup,
+           diffServMIBCounterGroup,
+           diffServMIBAlgDropGroup
+
+           }
+
+OBJECT diffServDataPathStatus  -- same as RFC 3289
+         SYNTAX RowStatus { active(1) }
+         WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+         DESCRIPTION
+             "Support for createAndWait and notInService is not
+              required."
+
+OBJECT diffServClfrStatus  -- same as RFC 3289
+         SYNTAX RowStatus { active(1) }
+         WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+         DESCRIPTION
+             "Support for createAndWait and notInService is not
+              required."
+
+OBJECT diffServClfrElementStatus  -- same as RFC 3289
+         SYNTAX RowStatus { active(1) }
+         WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+         DESCRIPTION
+             "Support for createAndWait and notInService is not
+              required."
+
+OBJECT diffServMultiFieldClfrAddrType
+         SYNTAX  InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT diffServMultiFieldClfrSrcAddr
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT diffServMultiFieldClfrDstAddr
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT diffServAlgDropStatus  -- same as RFC 3289
+         SYNTAX RowStatus { active(1) }
+         WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+         DESCRIPTION
+             "Support for createAndWait and notInService is not
+              required."
+
+OBJECT diffServDataPathStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServClfrStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServClfrElementStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServMultiFieldClfrStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServActionStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServCountActStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServAlgDropStorage
+         SYNTAX StorageType { volatile(2) }
+         DESCRIPTION
+             "An implementation is only required to support
+              volatile storage."
+
+OBJECT diffServAlgDropType
+         SYNTAX  INTEGER { alwaysDrop(5) }
+         DESCRIPTION
+             "This object is only used to provide packet
+              filtering.  Implementations need not support other
+              values of this enumeration."
+
+MODULE  -- docsDev
+
+MANDATORY-GROUPS {
+           docsDevBaseGroup,
+           docsDevBaseIgmpGroup,
+           docsDevBaseMaxCpeGroup,
+           docsDevSoftwareGroupV2,
+           docsDevServerGroupV2,
+           docsDevEventGroupV2,
+           docsDevFilterLLCGroup
+           }
+
+-- conditionally mandatory groups
+
+GROUP docsDevInetCpeGroup
+        DESCRIPTION
+            "This group is optional in Cable Modems."
+
+OBJECT docsDevDateTime
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only."
+
+OBJECT docsDevSTPControl
+         SYNTAX INTEGER { noStFilterBpdu(2) }
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support noStFilterBpdu(2)."
+
+OBJECT docsDevIgmpModeControl
+         SYNTAX INTEGER { passive(1) }
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support passive(1)."
+
+OBJECT docsDevSwServerAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevSwServerAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevServerDhcpAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevServerDhcpAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevServerTimeAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevServerTimeAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevServerConfigTftpAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevServerConfigTftpAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevEvReporting
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support local(0)."
+
+OBJECT docsDevEvSyslogAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevEvSyslogAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevSwServerTransportProtocol
+         SYNTAX INTEGER { tftp(1) }
+         DESCRIPTION
+             "An implementation is only required to support TFTP
+              software image downloads."
+         ::= { docsDevCompliancesV2 1 }
+
+docsDevCmtsCompliance MODULE-COMPLIANCE
+         STATUS  current
+         DESCRIPTION
+             "The compliance statement for DOCSIS Cable Modem
+              Termination Systems.
+
+              This compliance statement applies to implementations
+              of DOCSIS versions that are not IPv6 capable."
+
+MODULE  -- docsDev
+
+-- conditionally mandatory groups
+
+GROUP docsDevBaseGroup
+        DESCRIPTION
+            "Optional in Cable Modem Termination Systems."
+
+GROUP docsDevBaseIgmpGroup
+        DESCRIPTION
+            "Optional in Cable Modem Termination Systems."
+
+GROUP docsDevBaseMaxCpeGroup
+        DESCRIPTION
+            "This group MUST NOT be implemented in Cable Modem
+             Termination Systems."
+
+GROUP docsDevSoftwareGroupV2
+        DESCRIPTION
+            "Optional in Cable Modem Termination Systems."
+
+GROUP docsDevServerGroupV2
+        DESCRIPTION
+            "This group MUST NOT be implemented in Cable Modem
+             Termination Systems."
+
+GROUP docsDevEventGroupV2
+        DESCRIPTION
+            "Optional in Cable Modem Termination Systems."
+
+GROUP docsDevFilterLLCGroup
+        DESCRIPTION
+            "This group MUST NOT be implemented in Cable Modem
+             Termination Systems.  See the Subscriber Management
+             MIB for similar CMTS capability."
+
+GROUP docsDevInetCpeGroup
+        DESCRIPTION
+            "This group MUST NOT be implemented in Cable Modem
+             Termination Systems.  See the Subscriber Management
+             MIB for similar CMTS capability."
+
+OBJECT docsDevDateTime
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only."
+
+OBJECT docsDevSTPControl
+         SYNTAX INTEGER { noStFilterBpdu(2) }
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support noStFilterBpdu(2)."
+
+OBJECT docsDevIgmpModeControl
+         SYNTAX INTEGER { passive(1) }
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support passive(1)."
+
+OBJECT docsDevSwServerAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevSwServerAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevEvReporting
+         MIN-ACCESS read-only
+         DESCRIPTION
+             "It is compliant to implement this object as read-only.
+              Devices need only support local(0)."
+
+OBJECT docsDevEvSyslogAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevEvSyslogAddress
+         SYNTAX  InetAddress (SIZE(4))
+         DESCRIPTION
+             "An implementation is only required to support IPv4
+              addresses."
+
+OBJECT docsDevSwServerTransportProtocol
+         SYNTAX INTEGER { tftp(1) }
+         DESCRIPTION
+             "An implementation is only required to support TFTP
+              software image downloads."
+         ::= { docsDevCompliancesV2 2 }
+
+docsDevBaseIgmpGroup OBJECT-GROUP
+        OBJECTS {
+             docsDevIgmpModeControl
+        }
+        STATUS      current
+        DESCRIPTION
+            "An object providing cable device IGMP status and
+             control."
+        ::= { docsDevGroupsV2 1 }
+
+docsDevBaseMaxCpeGroup OBJECT-GROUP
+        OBJECTS {
+             docsDevMaxCpe
+        }
+        STATUS      current
+        DESCRIPTION
+            "An object providing management of the maximum number of
+             CPEs permitted access through a cable modem."
+        ::= { docsDevGroupsV2 2 }
+
+docsDevNmAccessExtGroup OBJECT-GROUP
+        OBJECTS {
+             docsDevNmAccessTrapVersion
+
+        }
+        STATUS      deprecated
+        DESCRIPTION
+            "An object, in addition to the objects in
+             docsDevNmAccessGroup, for controlling access to
+             SNMP objects on cable devices.
+
+             This group is included in this MIB due to existing
+             implementations of docsDevNmAccessTrapVersion in
+             DOCSIS cable modems.
+
+             This group has been deprecated because the object has
+             been deprecated in favor of SNMPv3 and Coexistence
+             MIBs."
+        ::= { docsDevGroupsV2 3 }
+
+docsDevSoftwareGroupV2 OBJECT-GROUP
+        OBJECTS {
+            docsDevSwFilename,
+            docsDevSwAdminStatus,
+            docsDevSwOperStatus,
+            docsDevSwCurrentVers,
+            docsDevSwServerAddressType,
+            docsDevSwServerAddress,
+            docsDevSwServerTransportProtocol
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects for controlling software
+             downloads.  This group replaces docsDevSoftwareGroup."
+        ::= { docsDevGroupsV2 4 }
+
+docsDevServerGroupV2 OBJECT-GROUP
+        OBJECTS {
+            docsDevServerBootState,
+            docsDevServerDhcpAddressType,
+            docsDevServerDhcpAddress,
+            docsDevServerTimeAddressType,
+            docsDevServerTimeAddress,
+            docsDevServerConfigTftpAddressType,
+            docsDevServerConfigTftpAddress,
+            docsDevServerConfigFile
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects providing status about server
+             provisioning.  This group replaces docsDevServerGroup."
+        ::= { docsDevGroupsV2 5 }
+
+docsDevEventGroupV2 OBJECT-GROUP
+        OBJECTS {
+            docsDevEvControl,
+            docsDevEvThrottleAdminStatus,
+            docsDevEvThrottleThreshold,
+            docsDevEvThrottleInterval,
+            docsDevEvReporting,
+            docsDevEvFirstTime,
+            docsDevEvLastTime,
+            docsDevEvCounts,
+            docsDevEvLevel,
+            docsDevEvId,
+            docsDevEvText,
+            docsDevEvSyslogAddressType,
+            docsDevEvSyslogAddress,
+            docsDevEvThrottleThresholdExceeded
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects used to control and monitor
+             events.  This group replaces docsDevEventGroup.
+             The event reporting mechanism, and more specifically
+             docsDevEvReporting, can be used to take advantage of
+             the event reporting features of RFC3413 and RFC3014."
+        ::= { docsDevGroupsV2 6 }
+
+docsDevFilterLLCGroup OBJECT-GROUP
+        OBJECTS {
+            docsDevFilterLLCUnmatchedAction,
+            docsDevFilterLLCStatus,
+            docsDevFilterLLCIfIndex,
+            docsDevFilterLLCProtocolType,
+            docsDevFilterLLCProtocol,
+            docsDevFilterLLCMatches
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects to specify link layer filters."
+        ::= { docsDevGroupsV2 7 }
+
+docsDevInetCpeGroup OBJECT-GROUP
+        OBJECTS {
+           docsDevCpeEnroll,
+           docsDevCpeIpMax,
+           docsDevCpeInetSource,
+           docsDevCpeInetRowStatus
+        }
+        STATUS     current
+        DESCRIPTION
+            "A collection of objects used to control the number
+             and specific values of Internet (e.g., IPv4 and IPv6)
+             addresses allowed for associated Customer Premises
+             Equipment (CPE)."
+        ::= { docsDevGroupsV2 8 }
+
+END
diff --git a/snmp_builder/mibs/DOCS-IETF-BPI2-MIB.mib b/snmp_builder/mibs/DOCS-IETF-BPI2-MIB.mib
new file mode 100644
index 0000000..aa23a3e
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-IETF-BPI2-MIB.mib
@@ -0,0 +1,3451 @@
+DOCS-IETF-BPI2-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,
+        Integer32,
+        Unsigned32,
+        Counter32,
+        mib-2
+             FROM SNMPv2-SMI           -- [RFC2578]
+        SnmpAdminString
+             FROM SNMP-FRAMEWORK-MIB   -- [RFC3411]
+        TEXTUAL-CONVENTION,
+        MacAddress,
+        RowStatus,
+        TruthValue,
+        DateAndTime,
+        StorageType
+             FROM SNMPv2-TC            -- [RFC2579]
+        OBJECT-GROUP,
+        MODULE-COMPLIANCE
+             FROM SNMPv2-CONF          -- [RFC2580]
+        ifIndex
+             FROM IF-MIB               -- [RFC2863]
+        InetAddressType,
+        InetAddress
+
+             FROM INET-ADDRESS-MIB;    -- [RFC4001]
+
+   docsBpi2MIB    MODULE-IDENTITY
+        LAST-UPDATED "200507200000Z" -- July 20, 2005
+        ORGANIZATION "IETF IP over Cable Data Network (IPCDN)
+                      Working Group"
+        CONTACT-INFO "---------------------------------------
+                   Stuart M. Green
+                   E-mail: rubbersoul3@yahoo.com
+                   ---------------------------------------
+                   Kaz Ozawa
+                   Automotive Systems Development Center
+                   TOSHIBA CORPORATION
+                   1-1, Shibaura 1-Chome
+                   Minato-ku, Tokyo 105-8001
+                   Japan
+                   Phone: +81-3-3457-8569
+                   Fax: +81-3-5444-9325
+                   E-mail: Kazuyoshi.Ozawa@toshiba.co.jp
+                   ---------------------------------------
+                   Alexander Katsnelson
+                   Postal:
+                   Tel:    +1-303-680-3924
+                   E-mail: katsnelson6@peoplepc.com
+                   ---------------------------------------
+                   Eduardo Cardona
+                   Postal:
+                   Cable Television Laboratories, Inc.
+                   858 Coal Creek Circle
+                   Louisville, CO 80027- 9750
+                   U.S.A.
+                   Tel:    +1 303 661 9100
+                   Fax:    +1 303 661 9199
+                   E-mail: e.cardona@cablelabs.com
+                   ---------------------------------------
+
+           IETF IPCDN Working Group
+           General Discussion: ipcdn@ietf.org
+           Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn.
+           Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn.
+           Co-chairs: Richard Woundy, rwoundy@cisco.com
+                      Jean-Francois Mule, jfm@cablelabs.com"
+        DESCRIPTION
+            "This is the MIB module for the DOCSIS Baseline
+             Privacy Plus Interface (BPI+) at cable modems (CMs)
+             and cable modem termination systems (CMTSs).
+
+             Copyright (C) The Internet Society (2005).  This
+
+             version of this MIB module is part of RFC 4131; see
+             the RFC itself for full legal notices."
+
+        REVISION        "200507200000Z"  -- July 20, 2005
+        DESCRIPTION
+            "Initial version of the IETF BPI+ MIB module.
+             This version published as RFC 4131."
+           ::= { mib-2 126 }
+
+   -- Textual conventions
+
+DocsX509ASN1DEREncodedCertificate ::= TEXTUAL-CONVENTION
+        STATUS    current
+        DESCRIPTION
+            "An X509 digital certificate encoded as an ASN.1 DER
+        object."
+        SYNTAX    OCTET STRING (SIZE (0..4096))
+
+DocsSAId ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS    current
+        DESCRIPTION
+             "Security Association identifier (SAID)."
+        REFERENCE
+              "DOCSIS Baseline Privacy Plus Interface
+        specification, Section 2.1.3, BPI+ Security
+        Associations"
+        SYNTAX    Integer32 (1..16383)
+
+DocsSAIdOrZero ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS    current
+        DESCRIPTION
+             "Security Association identifier (SAID).  The value
+        zero indicates that the SAID is yet to be determined."
+        REFERENCE
+              "DOCSIS Baseline Privacy Plus Interface
+        specification, Section 2.1.3, BPI+ Security
+              Associations"
+        SYNTAX    Unsigned32 (0 | 1..16383)
+
+DocsBpkmSAType ::= TEXTUAL-CONVENTION
+        STATUS    current
+        DESCRIPTION
+             "The type of security association (SA).
+        The values of the named-numbers are associated
+        with the BPKM SA-Type attributes:
+        'primary' corresponds to code '1', 'static' to code '2',
+        and 'dynamic' to code '3'.
+        The 'none' value must only be used if the SA type has yet
+        to be determined."
+        REFERENCE
+              "DOCSIS Baseline Privacy Plus Interface
+        specification, Section 4.2.2.24"
+        SYNTAX    INTEGER {
+                       none(0),
+                       primary(1),
+                       static(2),
+                       dynamic(3)
+                  }
+
+DocsBpkmDataEncryptAlg ::= TEXTUAL-CONVENTION
+        STATUS    current
+        DESCRIPTION
+            "The list of data encryption algorithms defined for
+        the DOCSIS interface in the BPKM cryptographic-suite
+        parameter.  The value 'none' indicates that the SAID
+        being referenced has no data encryption."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        SYNTAX    INTEGER {
+                       none(0),
+                       des56CbcMode(1),
+                       des40CbcMode(2),
+                       t3Des128CbcMode(3),
+                       aes128CbcMode(4),
+                       aes256CbcMode(5)
+                  }
+
+DocsBpkmDataAuthentAlg ::= TEXTUAL-CONVENTION
+        STATUS    current
+        DESCRIPTION
+            "The list of data integrity algorithms defined for the
+        DOCSIS interface in the BPKM cryptographic-suite parameter.
+        The value 'none' indicates that no data integrity is used for
+        the SAID being referenced."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        SYNTAX    INTEGER {
+                       none(0),
+                       hmacSha196(1)
+                  }
+
+   docsBpi2MIBObjects  OBJECT IDENTIFIER ::= { docsBpi2MIB 1 }
+
+   -- Cable Modem Group
+
+   docsBpi2CmObjects OBJECT IDENTIFIER ::= { docsBpi2MIBObjects 1 }
+
+   --
+   -- The BPI+ base and authorization table for CMs,
+   -- indexed by ifIndex
+   --
+
+   docsBpi2CmBaseTable OBJECT-TYPE
+        SYNTAX              SEQUENCE OF    DocsBpi2CmBaseEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+             "This table describes the basic and authorization-
+        related Baseline Privacy Plus attributes of each CM MAC
+        interface."
+        ::= { docsBpi2CmObjects 1 }
+
+   docsBpi2CmBaseEntry OBJECT-TYPE
+        SYNTAX              DocsBpi2CmBaseEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+             "Each entry contains objects describing attributes of
+        one CM MAC interface.  An entry in this table exists for
+        each ifEntry with an ifType of docsCableMaclayer(127)."
+        INDEX               { ifIndex }
+        ::= { docsBpi2CmBaseTable 1 }
+
+   DocsBpi2CmBaseEntry ::= SEQUENCE {
+        docsBpi2CmPrivacyEnable             TruthValue,
+        docsBpi2CmPublicKey                 OCTET STRING,
+        docsBpi2CmAuthState                 INTEGER,
+        docsBpi2CmAuthKeySequenceNumber     Integer32,
+        docsBpi2CmAuthExpiresOld            DateAndTime,
+        docsBpi2CmAuthExpiresNew            DateAndTime,
+        docsBpi2CmAuthReset                 TruthValue,
+        docsBpi2CmAuthGraceTime             Integer32,
+        docsBpi2CmTEKGraceTime              Integer32,
+        docsBpi2CmAuthWaitTimeout           Integer32,
+        docsBpi2CmReauthWaitTimeout         Integer32,
+        docsBpi2CmOpWaitTimeout             Integer32,
+        docsBpi2CmRekeyWaitTimeout          Integer32,
+        docsBpi2CmAuthRejectWaitTimeout     Integer32,
+        docsBpi2CmSAMapWaitTimeout          Integer32,
+        docsBpi2CmSAMapMaxRetries           Integer32,
+        docsBpi2CmAuthentInfos              Counter32,
+        docsBpi2CmAuthRequests              Counter32,
+        docsBpi2CmAuthReplies               Counter32,
+        docsBpi2CmAuthRejects               Counter32,
+        docsBpi2CmAuthInvalids              Counter32,
+        docsBpi2CmAuthRejectErrorCode       INTEGER,
+        docsBpi2CmAuthRejectErrorString     SnmpAdminString,
+        docsBpi2CmAuthInvalidErrorCode      INTEGER,
+        docsBpi2CmAuthInvalidErrorString    SnmpAdminString
+        }
+
+   docsBpi2CmPrivacyEnable  OBJECT-TYPE
+        SYNTAX              TruthValue
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "This object identifies whether this CM is
+        provisioned to run Baseline Privacy Plus."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1."
+        ::= { docsBpi2CmBaseEntry 1 }
+
+   docsBpi2CmPublicKey     OBJECT-TYPE
+        SYNTAX             OCTET STRING (SIZE (0..524))
+        MAX-ACCESS         read-only
+        STATUS             current
+        DESCRIPTION
+             "The value of this object is a DER-encoded
+        RSAPublicKey ASN.1 type string, as defined in the RSA
+        Encryption Standard (PKCS #1), corresponding to the
+        public key of the CM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.4."
+        ::= { docsBpi2CmBaseEntry 2 }
+
+   docsBpi2CmAuthState OBJECT-TYPE
+        SYNTAX         INTEGER   {
+                       start(1),
+                       authWait(2),
+                       authorized(3),
+                       reauthWait(4),
+                       authRejectWait(5),
+                       silent(6)
+                  }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the state of the CM
+        authorization FSM.  The start state indicates that FSM is
+        in its initial state."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.1.2.1."
+        ::= { docsBpi2CmBaseEntry 3 }
+
+   docsBpi2CmAuthKeySequenceNumber    OBJECT-TYPE
+        SYNTAX              Integer32 (0..15)
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "The value of this object is the most recent
+        authorization key sequence number for this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.2 and 4.2.2.10."
+        ::= { docsBpi2CmBaseEntry 4 }
+
+   docsBpi2CmAuthExpiresOld OBJECT-TYPE
+        SYNTAX              DateAndTime
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "The value of this object is the actual clock time for
+        expiration of the immediate predecessor of the most recent
+        authorization key for this FSM.  If this FSM has only one
+        authorization key, then the value is the time of activation
+        of this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.2 and 4.2.2.9."
+        ::= { docsBpi2CmBaseEntry 5 }
+
+   docsBpi2CmAuthExpiresNew OBJECT-TYPE
+        SYNTAX              DateAndTime
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "The value of this object is the actual clock time for
+        expiration of the most recent authorization key for this
+        FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.2 and 4.2.2.9."
+        ::= { docsBpi2CmBaseEntry 6 }
+
+   docsBpi2CmAuthReset OBJECT-TYPE
+        SYNTAX         TruthValue
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "Setting this object to 'true' generates a Reauthorize
+        event in the authorization FSM.  Reading this object always
+        returns FALSE.
+
+        This object is for testing purposes only, and therefore it
+        is not required to be associated with a last reset
+        object."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.1.2.3.4."
+        ::= { docsBpi2CmBaseEntry 7 }
+
+   docsBpi2CmAuthGraceTime  OBJECT-TYPE
+        SYNTAX         Integer32 (1..6047999)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the grace time for an
+        authorization key in seconds.  A CM is expected to start
+        trying to get a new authorization key beginning
+        AuthGraceTime seconds before the most recent authorization
+        key actually expires."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.3."
+        ::= { docsBpi2CmBaseEntry 8 }
+
+   docsBpi2CmTEKGraceTime   OBJECT-TYPE
+        SYNTAX         Integer32 (1..302399)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the grace time for
+        the TEK in seconds.  The CM is expected to start trying to
+        acquire a new TEK beginning TEK GraceTime seconds before
+        the expiration of the most recent TEK."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.6."
+        ::= { docsBpi2CmBaseEntry 9 }
+
+   docsBpi2CmAuthWaitTimeout     OBJECT-TYPE
+        SYNTAX         Integer32 (1..30)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the Authorize Wait
+        Timeout in seconds."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.1."
+        ::= { docsBpi2CmBaseEntry 10 }
+
+   docsBpi2CmReauthWaitTimeout   OBJECT-TYPE
+        SYNTAX         Integer32 (1..30)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the Reauthorize Wait
+        Timeout in seconds."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.2."
+        ::= { docsBpi2CmBaseEntry 11 }
+
+   docsBpi2CmOpWaitTimeout  OBJECT-TYPE
+        SYNTAX         Integer32 (1..10)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the Operational Wait
+        Timeout in seconds."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.4."
+        ::= { docsBpi2CmBaseEntry 12 }
+
+   docsBpi2CmRekeyWaitTimeout    OBJECT-TYPE
+        SYNTAX         Integer32 (1..10)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the Rekey Wait Timeout
+        in seconds."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.5."
+        ::= { docsBpi2CmBaseEntry 13 }
+
+   docsBpi2CmAuthRejectWaitTimeout    OBJECT-TYPE
+        SYNTAX         Integer32 (1..600)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the Authorization Reject
+        Wait Timeout in seconds."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.7."
+        ::= { docsBpi2CmBaseEntry 14 }
+
+   docsBpi2CmSAMapWaitTimeout    OBJECT-TYPE
+        SYNTAX         Integer32 (1..10)
+        UNITS          "seconds"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the retransmission
+        interval, in seconds, of SA Map Requests from the MAP Wait
+        state."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.8."
+        ::= { docsBpi2CmBaseEntry 15 }
+
+   docsBpi2CmSAMapMaxRetries     OBJECT-TYPE
+        SYNTAX         Integer32 (0..10)
+        UNITS          "count"
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the maximum number of
+        Map Request retries allowed."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.1.1.1.9."
+        ::= { docsBpi2CmBaseEntry 16 }
+
+   docsBpi2CmAuthentInfos   OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times
+        the CM has transmitted an Authentication Information
+        message.  Discontinuities in the value of this counter can
+        occur at re-initialization of the management system, and at
+        other times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.9."
+        ::= { docsBpi2CmBaseEntry 17 }
+
+   docsBpi2CmAuthRequests   OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has transmitted an Authorization Request message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.1."
+        ::= { docsBpi2CmBaseEntry 18 }
+
+   docsBpi2CmAuthReplies    OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has received an Authorization Reply message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.2."
+        ::= { docsBpi2CmBaseEntry 19 }
+
+   docsBpi2CmAuthRejects    OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has received an Authorization Reject message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.3."
+        ::= { docsBpi2CmBaseEntry 20 }
+
+   docsBpi2CmAuthInvalids   OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the count of times the CM
+        has received an Authorization Invalid message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.7."
+        ::= { docsBpi2CmBaseEntry 21 }
+
+   docsBpi2CmAuthRejectErrorCode OBJECT-TYPE
+        SYNTAX         INTEGER {
+                              none(1),
+                              unknown(2),
+                              unauthorizedCm(3),
+                              unauthorizedSaid(4),
+                              permanentAuthorizationFailure(8),
+                              timeOfDayNotAcquired(11)
+                              }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent
+        Authorization Reject message received by the CM.  This has
+        the value unknown(2) if the last Error-Code value was 0 and
+        none(1) if no Authorization Reject message has been received
+        since reboot."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.3 and 4.2.2.15."
+        ::= { docsBpi2CmBaseEntry 22 }
+
+   docsBpi2CmAuthRejectErrorString    OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in the
+        most recent Authorization Reject message received by the
+        CM.  This is a zero length string if no Authorization
+        Reject message has been received since reboot."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.3 and 4.2.2.6."
+        ::= { docsBpi2CmBaseEntry 23 }
+
+   docsBpi2CmAuthInvalidErrorCode     OBJECT-TYPE
+        SYNTAX         INTEGER {
+                              none(1),
+                              unknown(2),
+                              unauthorizedCm(3),
+                              unsolicited(5),
+                              invalidKeySequence(6),
+                              keyRequestAuthenticationFailure(7)
+                              }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent
+        Authorization Invalid message received by the CM.  This has
+        the value unknown(2) if the last Error-Code value was 0 and
+        none(1) if no Authorization Invalid message has been received
+        since reboot."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.7 and 4.2.2.15."
+        ::= { docsBpi2CmBaseEntry 24 }
+
+   docsBpi2CmAuthInvalidErrorString   OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in the
+        most recent Authorization Invalid message received by the
+        CM.  This is a zero length string if no Authorization
+
+        Invalid message has been received since reboot."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.7 and 4.2.2.6."
+        ::= { docsBpi2CmBaseEntry 25 }
+
+   --
+   -- The CM TEK Table, indexed by ifIndex and SAID
+   --
+
+   docsBpi2CmTEKTable  OBJECT-TYPE
+        SYNTAX         SEQUENCE OF    DocsBpi2CmTEKEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table describes the attributes of each CM
+        Traffic Encryption Key (TEK) association.  The CM maintains
+        (no more than) one TEK association per SAID per CM MAC
+        interface."
+        ::= { docsBpi2CmObjects 2 }
+
+   docsBpi2CmTEKEntry  OBJECT-TYPE
+        SYNTAX         DocsBpi2CmTEKEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "Each entry contains objects describing the TEK
+        association attributes of one SAID.  The CM MUST create one
+        entry per SAID, regardless of whether the SAID was obtained
+        from a Registration Response message, from an Authorization
+        Reply message, or from any dynamic SAID establishment
+        mechanisms."
+        INDEX     { ifIndex, docsBpi2CmTEKSAId }
+        ::= { docsBpi2CmTEKTable 1 }
+
+   DocsBpi2CmTEKEntry ::= SEQUENCE {
+        docsBpi2CmTEKSAId                  DocsSAId,
+        docsBpi2CmTEKSAType                DocsBpkmSAType,
+        docsBpi2CmTEKDataEncryptAlg        DocsBpkmDataEncryptAlg,
+        docsBpi2CmTEKDataAuthentAlg        DocsBpkmDataAuthentAlg,
+        docsBpi2CmTEKState                 INTEGER,
+        docsBpi2CmTEKKeySequenceNumber     Integer32,
+        docsBpi2CmTEKExpiresOld            DateAndTime,
+        docsBpi2CmTEKExpiresNew            DateAndTime,
+        docsBpi2CmTEKKeyRequests           Counter32,
+        docsBpi2CmTEKKeyReplies            Counter32,
+        docsBpi2CmTEKKeyRejects            Counter32,
+        docsBpi2CmTEKInvalids              Counter32,
+        docsBpi2CmTEKAuthPends             Counter32,
+        docsBpi2CmTEKKeyRejectErrorCode    INTEGER,
+        docsBpi2CmTEKKeyRejectErrorString  SnmpAdminString,
+        docsBpi2CmTEKInvalidErrorCode      INTEGER,
+        docsBpi2CmTEKInvalidErrorString    SnmpAdminString
+        }
+
+   docsBpi2CmTEKSAId   OBJECT-TYPE
+        SYNTAX         DocsSAId
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the DOCSIS Security
+        Association ID (SAID)."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.12."
+        ::= { docsBpi2CmTEKEntry 1 }
+
+   docsBpi2CmTEKSAType OBJECT-TYPE
+        SYNTAX         DocsBpkmSAType
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the type of security
+        association."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 2.1.3."
+        ::= { docsBpi2CmTEKEntry 2 }
+
+   docsBpi2CmTEKDataEncryptAlg   OBJECT-TYPE
+        SYNTAX    DocsBpkmDataEncryptAlg
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data encryption
+        algorithm for this SAID."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        ::= { docsBpi2CmTEKEntry 3 }
+
+   docsBpi2CmTEKDataAuthentAlg   OBJECT-TYPE
+        SYNTAX    DocsBpkmDataAuthentAlg
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data authentication
+        algorithm for this SAID."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        ::= { docsBpi2CmTEKEntry 4 }
+
+   docsBpi2CmTEKState  OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               start(1),
+                               opWait(2),
+                               opReauthWait(3),
+                               operational(4),
+                               rekeyWait(5),
+                               rekeyReauthWait(6)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the state of the
+        indicated TEK FSM.  The start(1) state indicates that the
+        FSM is in its initial state."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.1.3.1."
+        ::= { docsBpi2CmTEKEntry 5 }
+
+   docsBpi2CmTEKKeySequenceNumber     OBJECT-TYPE
+        SYNTAX              Integer32 (0..15)
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "The value of this object is the most recent TEK
+        key sequence number for this TEK FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.2.10 and 4.2.2.13."
+        ::= { docsBpi2CmTEKEntry 6 }
+
+   docsBpi2CmTEKExpiresOld  OBJECT-TYPE
+        SYNTAX         DateAndTime
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the actual clock time for
+        expiration of the immediate predecessor of the most recent
+        TEK for this FSM.  If this FSM has only one TEK, then the
+        value is the time of activation of this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.5 and 4.2.2.9."
+        ::= { docsBpi2CmTEKEntry 7 }
+
+   docsBpi2CmTEKExpiresNew  OBJECT-TYPE
+        SYNTAX         DateAndTime
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the actual clock time for
+        expiration of the most recent TEK for this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.5 and 4.2.2.9."
+        ::= { docsBpi2CmTEKEntry 8 }
+
+   docsBpi2CmTEKKeyRequests OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has transmitted a Key Request message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.4."
+        ::= { docsBpi2CmTEKEntry 9 }
+
+   docsBpi2CmTEKKeyReplies  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has received a Key Reply message, including a message whose
+        authentication failed.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.5."
+        ::= { docsBpi2CmTEKEntry 10 }
+
+   docsBpi2CmTEKKeyRejects  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has received a Key Reject message, including a message
+        whose authentication failed.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.6."
+        ::= { docsBpi2CmTEKEntry 11 }
+
+   docsBpi2CmTEKInvalids    OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the CM
+        has received a TEK Invalid message, including a message
+        whose authentication failed.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.8."
+        ::= { docsBpi2CmTEKEntry 12 }
+
+   docsBpi2CmTEKAuthPends   OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the count of times an
+        Authorization Pending (Auth Pend) event occurred in this
+        FSM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.1.3.3.3."
+        ::= { docsBpi2CmTEKEntry 13 }
+
+   docsBpi2CmTEKKeyRejectErrorCode    OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               unauthorizedSaid(4)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent Key Reject
+        message received by the CM.  This has the value unknown(2) if
+        the last Error-Code value was 0 and none(1) if no Key
+        Reject message has been received since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.1.2.6 and 4.2.2.15."
+        ::= { docsBpi2CmTEKEntry 14 }
+
+   docsBpi2CmTEKKeyRejectErrorString  OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in the
+        most recent Key Reject message received by the CM.  This is
+        a zero length string if no Key Reject message has been
+        received since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.1.2.6 and 4.2.2.6."
+        ::= { docsBpi2CmTEKEntry 15 }
+
+   docsBpi2CmTEKInvalidErrorCode OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               invalidKeySequence(6)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent TEK Invalid
+        message received by the CM.  This has the value unknown(2) if
+        the last Error-Code value was 0 and none(1) if no TEK
+        Invalid message has been received since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.1.2.8 and 4.2.2.15."
+        ::= { docsBpi2CmTEKEntry 16 }
+
+   docsBpi2CmTEKInvalidErrorString    OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in the
+        most recent TEK Invalid message received by the CM.  This is
+        a zero length string if no TEK Invalid message has been
+        received since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.1.2.8 and 4.2.2.6."
+        ::= { docsBpi2CmTEKEntry 17 }
+
+   --
+   -- The CM Multicast Objects Group
+   --
+
+   docsBpi2CmMulticastObjects OBJECT IDENTIFIER
+        ::= { docsBpi2CmObjects 3 }
+
+   --
+   -- The CM Dynamic IP Multicast Mapping Table, indexed by
+   -- docsBpi2CmIpMulticastIndex and by ifIndex
+   --
+
+   docsBpi2CmIpMulticastMapTable OBJECT-TYPE
+        SYNTAX         SEQUENCE OF DocsBpi2CmIpMulticastMapEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table maps multicast IP addresses to SAIDs per
+        CM MAC Interface.
+        It is intended to map multicast IP addresses associated
+        with SA MAP Request messages."
+        ::= { docsBpi2CmMulticastObjects 1 }
+
+   docsBpi2CmIpMulticastMapEntry OBJECT-TYPE
+        SYNTAX         DocsBpi2CmIpMulticastMapEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "Each entry contains objects describing the mapping of
+        one multicast IP address to one SAID, as well as
+        associated state, message counters, and error information.
+
+        An entry may be removed from this table upon the reception
+        of an SA Map Reject."
+        INDEX     { ifIndex, docsBpi2CmIpMulticastIndex }
+        ::= { docsBpi2CmIpMulticastMapTable 1 }
+
+   DocsBpi2CmIpMulticastMapEntry ::= SEQUENCE {
+        docsBpi2CmIpMulticastIndex               Unsigned32,
+        docsBpi2CmIpMulticastAddressType         InetAddressType,
+        docsBpi2CmIpMulticastAddress             InetAddress,
+        docsBpi2CmIpMulticastSAId                DocsSAIdOrZero,
+        docsBpi2CmIpMulticastSAMapState          INTEGER,
+        docsBpi2CmIpMulticastSAMapRequests       Counter32,
+        docsBpi2CmIpMulticastSAMapReplies        Counter32,
+        docsBpi2CmIpMulticastSAMapRejects        Counter32,
+        docsBpi2CmIpMulticastSAMapRejectErrorCode INTEGER,
+        docsBpi2CmIpMulticastSAMapRejectErrorString SnmpAdminString
+        }
+
+   docsBpi2CmIpMulticastIndex         OBJECT-TYPE
+        SYNTAX         Unsigned32 (1..4294967295)
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The index of this row."
+        ::= { docsBpi2CmIpMulticastMapEntry 1 }
+
+   docsBpi2CmIpMulticastAddressType   OBJECT-TYPE
+        SYNTAX         InetAddressType
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The type of Internet address for
+        docsBpi2CmIpMulticastAddress."
+        ::= { docsBpi2CmIpMulticastMapEntry 2 }
+
+   docsBpi2CmIpMulticastAddress  OBJECT-TYPE
+        SYNTAX         InetAddress
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "This object represents the IP multicast address
+        to be mapped.  The type of this address is determined by
+        the value of the docsBpi2CmIpMulticastAddressType object."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 5.4."
+        ::= { docsBpi2CmIpMulticastMapEntry 3 }
+
+   docsBpi2CmIpMulticastSAId          OBJECT-TYPE
+        SYNTAX         DocsSAIdOrZero
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "This object represents the SAID to which the IP
+        multicast address has been mapped.  If no SA Map Reply has
+        been received for the IP address, this object should have
+        the value 0."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.12."
+        ::= { docsBpi2CmIpMulticastMapEntry 4 }
+
+   docsBpi2CmIpMulticastSAMapState         OBJECT-TYPE
+        SYNTAX         INTEGER {
+                              start(1),
+                              mapWait(2),
+                              mapped(3)
+                       }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the state of the SA
+        Mapping FSM for this IP."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 5.3.1."
+        ::= { docsBpi2CmIpMulticastMapEntry 5 }
+
+   docsBpi2CmIpMulticastSAMapRequests OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CM has transmitted an SA Map Request message for this IP.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.10."
+        ::= { docsBpi2CmIpMulticastMapEntry 6 }
+
+   docsBpi2CmIpMulticastSAMapReplies  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CM has received an SA Map Reply message for this IP.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.11."
+        ::= { docsBpi2CmIpMulticastMapEntry 7 }
+
+   docsBpi2CmIpMulticastSAMapRejects  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CM has received an SA MAP Reject message for this IP.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.12."
+        ::= { docsBpi2CmIpMulticastMapEntry 8 }
+
+   docsBpi2CmIpMulticastSAMapRejectErrorCode    OBJECT-TYPE
+        SYNTAX         INTEGER {
+                       none(1),
+                       unknown(2),
+                       noAuthForRequestedDSFlow(9),
+                       dsFlowNotMappedToSA(10)
+                       }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent SA Map
+        Reject message sent in response to an SA Map Request for
+        This IP.  It has the value none(1) if no SA MAP Reject
+        message has been received since entry creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.12 and 4.2.2.15."
+        ::= { docsBpi2CmIpMulticastMapEntry 9 }
+
+   docsBpi2CmIpMulticastSAMapRejectErrorString  OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in
+        the most recent SA Map Reject message sent in response to
+        an SA Map Request for this IP.  It is a zero length string
+        if no SA Map Reject message has been received since entry
+        creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.12 and 4.2.2.6."
+        ::= { docsBpi2CmIpMulticastMapEntry 10 }
+
+   --
+   -- CM Cert Objects
+   --
+
+   docsBpi2CmCertObjects OBJECT IDENTIFIER
+        ::= { docsBpi2CmObjects 4 }
+
+   --
+   -- CM Device Cert Table
+   --
+
+   docsBpi2CmDeviceCertTable  OBJECT-TYPE
+        SYNTAX                SEQUENCE OF DocsBpi2CmDeviceCertEntry
+        MAX-ACCESS            not-accessible
+        STATUS                current
+        DESCRIPTION
+             "This table describes the Baseline Privacy Plus
+        device certificates for each CM MAC interface."
+        ::= { docsBpi2CmCertObjects 1 }
+
+   docsBpi2CmDeviceCertEntry  OBJECT-TYPE
+        SYNTAX              DocsBpi2CmDeviceCertEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+             "Each entry contains the device certificates of
+        one CM MAC interface.  An entry in this table exists for
+        each ifEntry with an ifType of docsCableMaclayer(127)."
+        INDEX               { ifIndex }
+        ::= { docsBpi2CmDeviceCertTable 1 }
+
+   DocsBpi2CmDeviceCertEntry ::= SEQUENCE {
+        docsBpi2CmDeviceCmCert
+                              DocsX509ASN1DEREncodedCertificate,
+        docsBpi2CmDeviceManufCert
+                              DocsX509ASN1DEREncodedCertificate
+        }
+
+   docsBpi2CmDeviceCmCert   OBJECT-TYPE
+        SYNTAX        DocsX509ASN1DEREncodedCertificate
+        MAX-ACCESS         read-write
+        STATUS              current
+        DESCRIPTION
+             "The X509 DER-encoded cable modem certificate.
+        Note:  This object can be set only when the value is the
+        zero-length OCTET STRING; otherwise, an error of
+        'inconsistentValue' is returned.  Once the object
+        contains the certificate, its access MUST be read-only
+        and persists after re-initialization of the
+        managed system."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.1."
+        ::= { docsBpi2CmDeviceCertEntry 1 }
+
+   docsBpi2CmDeviceManufCert     OBJECT-TYPE
+        SYNTAX         DocsX509ASN1DEREncodedCertificate
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The X509 DER-encoded manufacturer certificate that
+        signed the cable modem certificate."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.1."
+        ::= { docsBpi2CmDeviceCertEntry 2 }
+
+   --
+   -- CM Crypto Suite Table
+   --
+
+   docsBpi2CmCryptoSuiteTable    OBJECT-TYPE
+        SYNTAX         SEQUENCE OF    DocsBpi2CmCryptoSuiteEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table describes the Baseline Privacy Plus
+        cryptographic suite capabilities for each CM MAC
+        interface."
+        ::= { docsBpi2CmObjects 5 }
+
+   docsBpi2CmCryptoSuiteEntry    OBJECT-TYPE
+        SYNTAX         DocsBpi2CmCryptoSuiteEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "Each entry contains a cryptographic suite pair
+        that this CM MAC supports."
+        INDEX     { ifIndex, docsBpi2CmCryptoSuiteIndex }
+        ::= { docsBpi2CmCryptoSuiteTable 1 }
+
+   DocsBpi2CmCryptoSuiteEntry ::= SEQUENCE {
+        docsBpi2CmCryptoSuiteIndex              Unsigned32,
+        docsBpi2CmCryptoSuiteDataEncryptAlg
+                                    DocsBpkmDataEncryptAlg,
+        docsBpi2CmCryptoSuiteDataAuthentAlg
+                                    DocsBpkmDataAuthentAlg
+        }
+
+   docsBpi2CmCryptoSuiteIndex OBJECT-TYPE
+        SYNTAX         Unsigned32 (1..1000)
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The index for a cryptographic suite row."
+        ::= { docsBpi2CmCryptoSuiteEntry 1 }
+
+   docsBpi2CmCryptoSuiteDataEncryptAlg     OBJECT-TYPE
+        SYNTAX    DocsBpkmDataEncryptAlg
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data encryption
+        algorithm for this cryptographic suite capability."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        ::= { docsBpi2CmCryptoSuiteEntry 2 }
+
+   docsBpi2CmCryptoSuiteDataAuthentAlg     OBJECT-TYPE
+        SYNTAX    DocsBpkmDataAuthentAlg
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data authentication
+        algorithm for this cryptographic suite capability."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        ::= { docsBpi2CmCryptoSuiteEntry 3 }
+
+   -- Cable Modem Termination System Group
+
+docsBpi2CmtsObjects OBJECT IDENTIFIER ::= { docsBpi2MIBObjects 2 }
+
+   --
+   -- SPECIAL NOTE:  For the following CMTS tables, when a CM is
+   -- running in BPI mode, replace SAID (Security Association ID)
+   -- with SID (Service ID).  The CMTS is required to map SAIDs and
+   -- SIDs to one contiguous space.
+   --
+
+   --
+   -- The BPI+ base table for CMTSs, indexed by ifIndex
+   --
+
+   docsBpi2CmtsBaseTable    OBJECT-TYPE
+        SYNTAX              SEQUENCE OF    DocsBpi2CmtsBaseEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+             "This table describes the basic Baseline Privacy
+        attributes of each CMTS MAC interface."
+        ::= { docsBpi2CmtsObjects 1 }
+
+   docsBpi2CmtsBaseEntry    OBJECT-TYPE
+        SYNTAX              DocsBpi2CmtsBaseEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+             "Each entry contains objects describing attributes of
+        one CMTS MAC interface.  An entry in this table exists for
+        each ifEntry with an ifType of docsCableMaclayer(127)."
+        INDEX     { ifIndex }
+        ::= { docsBpi2CmtsBaseTable 1 }
+
+   DocsBpi2CmtsBaseEntry ::= SEQUENCE {
+
+        docsBpi2CmtsDefaultAuthLifetime              Integer32,
+        docsBpi2CmtsDefaultTEKLifetime               Integer32,
+        docsBpi2CmtsDefaultSelfSignedManufCertTrust  INTEGER,
+            docsBpi2CmtsCheckCertValidityPeriods         TruthValue,
+            docsBpi2CmtsAuthentInfos                     Counter32,
+            docsBpi2CmtsAuthRequests                     Counter32,
+            docsBpi2CmtsAuthReplies                      Counter32,
+            docsBpi2CmtsAuthRejects                      Counter32,
+            docsBpi2CmtsAuthInvalids                     Counter32,
+            docsBpi2CmtsSAMapRequests                    Counter32,
+            docsBpi2CmtsSAMapReplies                     Counter32,
+            docsBpi2CmtsSAMapRejects                     Counter32
+            }
+
+   docsBpi2CmtsDefaultAuthLifetime    OBJECT-TYPE
+        SYNTAX         Integer32 (1..6048000)
+        UNITS          "seconds"
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the default lifetime, in
+        seconds, that the CMTS assigns to a new authorization key.
+        This object value persists after re-initialization of the
+        managed system."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.2."
+        DEFVAL { 604800 }
+        ::= { docsBpi2CmtsBaseEntry 1 }
+
+   docsBpi2CmtsDefaultTEKLifetime     OBJECT-TYPE
+        SYNTAX         Integer32 (1..604800)
+        UNITS          "seconds"
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the default lifetime, in
+        seconds, that the CMTS assigns to a new Traffic Encryption
+        Key (TEK).
+        This object value persists after re-initialization of the
+        managed system."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Appendix A.2."
+        DEFVAL { 43200 }
+        ::= { docsBpi2CmtsBaseEntry 2 }
+
+   docsBpi2CmtsDefaultSelfSignedManufCertTrust  OBJECT-TYPE
+        SYNTAX    INTEGER {
+                  trusted (1),
+                  untrusted (2)
+                  }
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "This object determines the default trust of
+        self-signed manufacturer certificate entries, contained
+        in docsBpi2CmtsCACertTable, and created after this
+        object is set.
+        This object need not persist after re-initialization
+        of the managed system."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.1"
+        ::= { docsBpi2CmtsBaseEntry 3 }
+
+   docsBpi2CmtsCheckCertValidityPeriods    OBJECT-TYPE
+        SYNTAX         TruthValue
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "Setting this object to 'true' causes all chained and
+        root certificates in the chain to have their validity
+        periods checked against the current time of day, when
+        the CMTS receives an Authorization Request from the
+        CM.
+        A 'false' setting causes all certificates in the chain
+        not to have their validity periods checked against the
+        current time of day.
+        This object need not persist after re-initialization
+        of the managed system."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.2"
+        ::= { docsBpi2CmtsBaseEntry 4 }
+
+   docsBpi2CmtsAuthentInfos OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has received an Authentication Information message
+        from any CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.9."
+        ::= { docsBpi2CmtsBaseEntry 5 }
+
+   docsBpi2CmtsAuthRequests OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+                "The value of this object is the number of times the
+        CMTS has received an Authorization Request message from any
+        CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.1."
+        ::= { docsBpi2CmtsBaseEntry 6 }
+
+   docsBpi2CmtsAuthReplies  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+               "The value of this object is the number of times the
+        CMTS has transmitted an Authorization Reply message to any
+        CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.2."
+        ::= { docsBpi2CmtsBaseEntry 7 }
+
+   docsBpi2CmtsAuthRejects  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+                "The value of this object is the number of times the
+        CMTS has transmitted an Authorization Reject message to any
+
+        CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.3."
+        ::= { docsBpi2CmtsBaseEntry 8 }
+
+   docsBpi2CmtsAuthInvalids OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+                 "The value of this object is the number of times
+        the CMTS has transmitted an Authorization Invalid message
+        to any CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.7."
+        ::= { docsBpi2CmtsBaseEntry 9 }
+
+   docsBpi2CmtsSAMapRequests     OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has received an SA Map Request message from any CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.10."
+        ::= { docsBpi2CmtsBaseEntry 10 }
+
+   docsBpi2CmtsSAMapReplies OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an SA Map Reply message to any CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.11."
+        ::= { docsBpi2CmtsBaseEntry 11 }
+
+   docsBpi2CmtsSAMapRejects OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an SA Map Reject message to any CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.12."
+        ::= { docsBpi2CmtsBaseEntry 12 }
+
+   --
+   -- The CMTS Authorization Table, indexed by ifIndex and CM MAC
+   -- address
+   --
+
+   docsBpi2CmtsAuthTable    OBJECT-TYPE
+        SYNTAX         SEQUENCE OF    DocsBpi2CmtsAuthEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table describes the attributes of each CM
+        authorization association.  The CMTS maintains one
+        authorization association with each Baseline Privacy-
+        enabled CM, registered on each CMTS MAC interface,
+        regardless of whether the CM is authorized or rejected."
+        ::= { docsBpi2CmtsObjects 2 }
+
+   docsBpi2CmtsAuthEntry    OBJECT-TYPE
+        SYNTAX              DocsBpi2CmtsAuthEntry
+        MAX-ACCESS          not-accessible
+        STATUS              current
+        DESCRIPTION
+             "Each entry contains objects describing attributes of
+        one authorization association.  The CMTS MUST create one
+        entry per CM per MAC interface, based on the receipt of an
+        Authorization Request message, and MUST not delete the
+        entry until the CM loses registration."
+        INDEX     { ifIndex, docsBpi2CmtsAuthCmMacAddress }
+        ::= { docsBpi2CmtsAuthTable 1 }
+
+   DocsBpi2CmtsAuthEntry ::= SEQUENCE {
+        docsBpi2CmtsAuthCmMacAddress        MacAddress,
+        docsBpi2CmtsAuthCmBpiVersion        INTEGER,
+        docsBpi2CmtsAuthCmPublicKey         OCTET STRING,
+        docsBpi2CmtsAuthCmKeySequenceNumber Integer32,
+        docsBpi2CmtsAuthCmExpiresOld        DateAndTime,
+        docsBpi2CmtsAuthCmExpiresNew        DateAndTime,
+        docsBpi2CmtsAuthCmLifetime          Integer32,
+        docsBpi2CmtsAuthCmReset             INTEGER,
+        docsBpi2CmtsAuthCmInfos             Counter32,
+        docsBpi2CmtsAuthCmRequests          Counter32,
+        docsBpi2CmtsAuthCmReplies           Counter32,
+        docsBpi2CmtsAuthCmRejects           Counter32,
+        docsBpi2CmtsAuthCmInvalids          Counter32,
+        docsBpi2CmtsAuthRejectErrorCode     INTEGER,
+        docsBpi2CmtsAuthRejectErrorString   SnmpAdminString,
+        docsBpi2CmtsAuthInvalidErrorCode    INTEGER,
+        docsBpi2CmtsAuthInvalidErrorString  SnmpAdminString,
+        docsBpi2CmtsAuthPrimarySAId         DocsSAIdOrZero,
+        docsBpi2CmtsAuthBpkmCmCertValid     INTEGER,
+        docsBpi2CmtsAuthBpkmCmCert
+                             DocsX509ASN1DEREncodedCertificate,
+        docsBpi2CmtsAuthCACertIndexPtr      Unsigned32
+        }
+
+   docsBpi2CmtsAuthCmMacAddress  OBJECT-TYPE
+        SYNTAX         MacAddress
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the physical address of
+        the CM to which the authorization association applies."
+        ::= { docsBpi2CmtsAuthEntry 1 }
+
+   docsBpi2CmtsAuthCmBpiVersion  OBJECT-TYPE
+        SYNTAX         INTEGER {
+                         bpi (0),
+                         bpiPlus (1)
+                          }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the version of Baseline
+        Privacy for which this CM has registered.  The value
+        'bpiplus' represents the value of BPI-Version Attribute of
+        the Baseline Privacy Key Management BPKM attribute
+        BPI-Version (1).  The value 'bpi' is used to represent the
+        CM registered using DOCSIS 1.0 Baseline Privacy."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.22; ANSI/SCTE 22-2 2002(formerly DSS 02-03)
+        Data-Over-Cable Service Interface Specification DOCSIS 1.0
+        Baseline Privacy Interface (BPI)"
+        ::= { docsBpi2CmtsAuthEntry 2 }
+
+   docsBpi2CmtsAuthCmPublicKey   OBJECT-TYPE
+        SYNTAX         OCTET STRING (SIZE (0..524))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is a DER-encoded
+        RSAPublicKey ASN.1 type string, as defined in the RSA
+        Encryption Standard (PKCS #1), corresponding to the
+        public key of the CM.  This is the zero-length OCTET
+        STRING if the CMTS does not retain the public key."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.4."
+        ::= { docsBpi2CmtsAuthEntry 3 }
+
+   docsBpi2CmtsAuthCmKeySequenceNumber     OBJECT-TYPE
+        SYNTAX         Integer32 (0..15)
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the most recent
+        authorization key sequence number for this CM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.2 and 4.2.2.10."
+        ::= { docsBpi2CmtsAuthEntry 4 }
+
+   docsBpi2CmtsAuthCmExpiresOld  OBJECT-TYPE
+        SYNTAX         DateAndTime
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the actual clock time
+        for expiration of the immediate predecessor of the most
+        recent authorization key for this FSM.  If this FSM has only
+        one authorization key, then the value is the time of
+        activation of this FSM.
+        Note: This object has no meaning for CMs running in BPI
+        mode; therefore, this object is not instantiated for entries
+        associated to those CMs."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.2 and 4.2.2.9."
+        ::= { docsBpi2CmtsAuthEntry 5 }
+
+   docsBpi2CmtsAuthCmExpiresNew  OBJECT-TYPE
+        SYNTAX         DateAndTime
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+                  "The value of this object is the actual clock
+        time for expiration of the most recent authorization key
+        for this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.2 and 4.2.2.9."
+        ::= { docsBpi2CmtsAuthEntry 6 }
+
+   docsBpi2CmtsAuthCmLifetime    OBJECT-TYPE
+        SYNTAX         Integer32 (1..6048000)
+        UNITS          "seconds"
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the lifetime, in seconds,
+        that the CMTS assigns to an authorization key for this CM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.2 and Appendix A.2."
+        ::= { docsBpi2CmtsAuthEntry 7 }
+
+   docsBpi2CmtsAuthCmReset  OBJECT-TYPE
+        SYNTAX    INTEGER   {
+                            noResetRequested(1),
+                            invalidateAuth(2),
+                            sendAuthInvalid(3),
+                            invalidateTeks(4)
+                            }
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "Setting this object to invalidateAuth(2) causes the
+        CMTS to invalidate the current CM authorization key(s), but
+        not to transmit an Authorization Invalid message nor to
+        invalidate the primary SAID's TEKs.  Setting this object to
+        sendAuthInvalid(3) causes the CMTS to invalidate the
+        current CM authorization key(s), and to transmit an
+        Authorization Invalid message to the CM, but not to
+        invalidate the primary SAID's TEKs.  Setting this object to
+        invalidateTeks(4) causes the CMTS to invalidate the current
+        CM authorization key(s), to transmit an Authorization
+        Invalid message to the CM, and to invalidate the TEKs
+        associated with this CM's primary SAID.
+        For BPI mode, substitute all of the CM's unicast
+        TEKs for the primary SAID's TEKs in the previous
+        paragraph.
+        Reading this object returns the most recently set
+        value of this object or, if the object has not been set
+        since entry creation, returns noResetRequested(1)."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.1.2.3.4, 4.1.2.3.5, and 4.1.3.3.5."
+        ::= { docsBpi2CmtsAuthEntry 8 }
+
+   docsBpi2CmtsAuthCmInfos       OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has received an Authentication Information message
+        from this CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.9."
+        ::= { docsBpi2CmtsAuthEntry 9 }
+
+   docsBpi2CmtsAuthCmRequests    OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has received an Authorization Request message from
+
+        this CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.1."
+        ::= { docsBpi2CmtsAuthEntry 10 }
+
+   docsBpi2CmtsAuthCmReplies     OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an Authorization Reply message to this
+        CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.2."
+        ::= { docsBpi2CmtsAuthEntry 11 }
+
+   docsBpi2CmtsAuthCmRejects     OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an Authorization Reject message to
+        this CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.3."
+        ::= { docsBpi2CmtsAuthEntry 12 }
+
+   docsBpi2CmtsAuthCmInvalids    OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an Authorization Invalid message to
+        this CM.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.7."
+        ::= { docsBpi2CmtsAuthEntry 13 }
+
+   docsBpi2CmtsAuthRejectErrorCode    OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               unauthorizedCm(3),
+                               unauthorizedSaid(4),
+                               permanentAuthorizationFailure(8),
+                               timeOfDayNotAcquired(11)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent
+        Authorization Reject message transmitted to the CM.  This has
+        the value unknown(2) if the last Error-Code value was 0 and
+        none(1) if no Authorization Reject message has been
+        transmitted to the CM since entry creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.3 and 4.2.2.15."
+        ::= { docsBpi2CmtsAuthEntry 14 }
+
+   docsBpi2CmtsAuthRejectErrorString  OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in the
+        most recent Authorization Reject message transmitted to the
+        CM.  This is a zero length string if no Authorization
+        Reject message has been transmitted to the CM since entry
+        creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.3 and 4.2.2.6."
+        ::= { docsBpi2CmtsAuthEntry 15 }
+
+   docsBpi2CmtsAuthInvalidErrorCode   OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               unauthorizedCm(3),
+                               unsolicited(5),
+                               invalidKeySequence(6),
+                               keyRequestAuthenticationFailure(7)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent
+        Authorization Invalid message transmitted to the CM.  This
+        has the value unknown(2) if the last Error-Code value was 0
+        and none(1) if no Authorization Invalid message has been
+        transmitted to the CM since entry creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.7 and 4.2.2.15."
+        ::= { docsBpi2CmtsAuthEntry 16 }
+
+   docsBpi2CmtsAuthInvalidErrorString OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in the
+        most recent Authorization Invalid message transmitted to
+        the CM.  This is a zero length string if no Authorization
+        Invalid message has been transmitted to the CM since entry
+        creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.7 and 4.2.2.6."
+        ::= { docsBpi2CmtsAuthEntry 17 }
+
+   docsBpi2CmtsAuthPrimarySAId   OBJECT-TYPE
+        SYNTAX         DocsSAIdOrZero
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the Primary Security
+        Association identifier.  For BPI mode, the value must be
+
+        any unicast SID."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 2.1.3."
+        ::= { docsBpi2CmtsAuthEntry 18 }
+
+   docsBpi2CmtsAuthBpkmCmCertValid         OBJECT-TYPE
+        SYNTAX    INTEGER {
+                          unknown (0),
+                          validCmChained (1),
+                          validCmTrusted (2),
+                          invalidCmUntrusted (3),
+                          invalidCAUntrusted (4),
+                          invalidCmOther (5),
+                          invalidCAOther (6)
+                          }
+        MAX-ACCESS     read-only
+        STATUS    current
+        DESCRIPTION
+             "Contains the reason why a CM's certificate is deemed
+        valid or invalid.
+        Return unknown(0) if the CM is running BPI mode.
+        ValidCmChained(1) means the certificate is valid
+           because it chains to a valid certificate.
+        ValidCmTrusted(2) means the certificate is valid
+           because it has been provisioned (in the
+           docsBpi2CmtsProvisionedCmCert table) to be trusted.
+        InvalidCmUntrusted(3) means the certificate is invalid
+           because it has been provisioned (in the
+           docsBpi2CmtsProvisionedCmCert table) to be untrusted.
+        InvalidCAUntrusted(4) means the certificate is invalid
+           because it chains to an untrusted certificate.
+        InvalidCmOther(5) and InvalidCAOther(6) refer to
+           errors in parsing, validity periods, etc., which are
+           attributable to the CM certificate or its chain,
+           respectively; additional information may be found
+           in docsBpi2AuthRejectErrorString for these types
+           of errors."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.2."
+        ::= { docsBpi2CmtsAuthEntry 19 }
+
+   docsBpi2CmtsAuthBpkmCmCert    OBJECT-TYPE
+        SYNTAX         DocsX509ASN1DEREncodedCertificate
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The X509 CM Certificate sent as part of a BPKM
+        Authorization Request.
+        Note: The zero-length OCTET STRING must be returned if the
+        Entire certificate is not retained in the CMTS."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2."
+        ::= { docsBpi2CmtsAuthEntry 20 }
+
+   docsBpi2CmtsAuthCACertIndexPtr    OBJECT-TYPE
+        SYNTAX         Unsigned32 (0..4294967295)
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "A row index into docsBpi2CmtsCACertTable.
+              Returns the index in docsBpi2CmtsCACertTable to which
+              CA certificate this CM is chained to.  A value of
+              0 means it could not be found or not applicable."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2."
+        ::= { docsBpi2CmtsAuthEntry 21 }
+
+   --
+   -- The CMTS TEK Table, indexed by ifIndex and SAID
+   --
+
+   docsBpi2CmtsTEKTable     OBJECT-TYPE
+        SYNTAX         SEQUENCE OF    DocsBpi2CmtsTEKEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table describes the attributes of each
+        Traffic Encryption Key (TEK) association.  The CMTS
+        Maintains one TEK association per SAID on each CMTS MAC
+        interface."
+        ::= { docsBpi2CmtsObjects 3 }
+
+   docsBpi2CmtsTEKEntry     OBJECT-TYPE
+        SYNTAX         DocsBpi2CmtsTEKEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "Each entry contains objects describing attributes of
+        one TEK association on a particular CMTS MAC interface.  The
+        CMTS MUST create one entry per SAID per MAC interface,
+        based on the receipt of a Key Request message, and MUST not
+        delete the entry before the CM authorization for the SAID
+
+        permanently expires."
+        INDEX     { ifIndex, docsBpi2CmtsTEKSAId }
+        ::= { docsBpi2CmtsTEKTable 1 }
+
+   DocsBpi2CmtsTEKEntry ::= SEQUENCE {
+        docsBpi2CmtsTEKSAId                DocsSAId,
+        docsBpi2CmtsTEKSAType              DocsBpkmSAType,
+        docsBpi2CmtsTEKDataEncryptAlg      DocsBpkmDataEncryptAlg,
+        docsBpi2CmtsTEKDataAuthentAlg      DocsBpkmDataAuthentAlg,
+        docsBpi2CmtsTEKLifetime            Integer32,
+        docsBpi2CmtsTEKKeySequenceNumber   Integer32,
+        docsBpi2CmtsTEKExpiresOld          DateAndTime,
+        docsBpi2CmtsTEKExpiresNew          DateAndTime,
+        docsBpi2CmtsTEKReset               TruthValue,
+        docsBpi2CmtsKeyRequests            Counter32,
+        docsBpi2CmtsKeyReplies             Counter32,
+        docsBpi2CmtsKeyRejects             Counter32,
+        docsBpi2CmtsTEKInvalids            Counter32,
+        docsBpi2CmtsKeyRejectErrorCode     INTEGER,
+        docsBpi2CmtsKeyRejectErrorString   SnmpAdminString,
+        docsBpi2CmtsTEKInvalidErrorCode    INTEGER,
+        docsBpi2CmtsTEKInvalidErrorString  SnmpAdminString
+   }
+
+   docsBpi2CmtsTEKSAId OBJECT-TYPE
+        SYNTAX         DocsSAId
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the DOCSIS Security
+        Association ID (SAID)."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.12."
+        ::= { docsBpi2CmtsTEKEntry 1 }
+
+   docsBpi2CmtsTEKSAType    OBJECT-TYPE
+        SYNTAX         DocsBpkmSAType
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the type of security
+        association.  'dynamic' does not apply to CMs running in
+        BPI mode.  Unicast BPI TEKs must utilize the 'primary'
+        encoding, and multicast BPI TEKs must utilize the 'static'
+        encoding."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 2.1.3."
+        ::= { docsBpi2CmtsTEKEntry 2 }
+
+   docsBpi2CmtsTEKDataEncryptAlg OBJECT-TYPE
+        SYNTAX    DocsBpkmDataEncryptAlg
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data encryption
+        algorithm for this SAID."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        ::= { docsBpi2CmtsTEKEntry 3 }
+
+   docsBpi2CmtsTEKDataAuthentAlg OBJECT-TYPE
+        SYNTAX    DocsBpkmDataAuthentAlg
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data authentication
+        algorithm for this SAID."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        ::= { docsBpi2CmtsTEKEntry 4 }
+
+   docsBpi2CmtsTEKLifetime  OBJECT-TYPE
+        SYNTAX         Integer32 (1..604800)
+        UNITS          "seconds"
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the lifetime, in
+        seconds, that the CMTS assigns to keys for this TEK
+        association."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.5 and Appendix A.2."
+        ::= { docsBpi2CmtsTEKEntry 5 }
+
+   docsBpi2CmtsTEKKeySequenceNumber   OBJECT-TYPE
+        SYNTAX              Integer32 (0..15)
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "The value of this object is the most recent TEK
+
+        key sequence number for this SAID."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.2.10 and 4.2.2.13."
+        ::= { docsBpi2CmtsTEKEntry 6 }
+
+   docsBpi2CmtsTEKExpiresOld     OBJECT-TYPE
+        SYNTAX         DateAndTime
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the actual clock time
+        for expiration of the immediate predecessor of the most
+        recent TEK for this FSM.  If this FSM has only one TEK, then
+        the value is the time of activation of this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.5 and 4.2.2.9."
+        ::= { docsBpi2CmtsTEKEntry 7 }
+
+   docsBpi2CmtsTEKExpiresNew     OBJECT-TYPE
+        SYNTAX         DateAndTime
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the actual clock time
+        for expiration of the most recent TEK for this FSM."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.5 and 4.2.2.9."
+        ::= { docsBpi2CmtsTEKEntry 8 }
+
+   docsBpi2CmtsTEKReset     OBJECT-TYPE
+        SYNTAX         TruthValue
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+             "Setting this object to 'true' causes the CMTS to
+        invalidate all currently active TEKs and to generate new
+        TEKs for the associated SAID; the CMTS MAY also generate
+        unsolicited TEK Invalid messages, to optimize the TEK
+        synchronization between the CMTS and the CM(s).  Reading
+        this object always returns FALSE."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.1.3.3.5."
+        ::= { docsBpi2CmtsTEKEntry 9 }
+
+   docsBpi2CmtsKeyRequests  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has received a Key Request message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.4."
+        ::= { docsBpi2CmtsTEKEntry 10 }
+
+   docsBpi2CmtsKeyReplies   OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted a Key Reply message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.5."
+        ::= { docsBpi2CmtsTEKEntry 11 }
+
+   docsBpi2CmtsKeyRejects   OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted a Key Reject message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.6."
+        ::= { docsBpi2CmtsTEKEntry 12 }
+
+   docsBpi2CmtsTEKInvalids  OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted a TEK Invalid message.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.8."
+        ::= { docsBpi2CmtsTEKEntry 13 }
+
+   docsBpi2CmtsKeyRejectErrorCode     OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               unauthorizedSaid(4)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent Key Reject
+        message sent in response to a Key Request for this SAID.
+        This has the value unknown(2) if the last Error-Code value
+        was 0 and none(1) if no Key Reject message has been
+        received since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.6 and 4.2.2.15."
+        ::= { docsBpi2CmtsTEKEntry 14 }
+
+   docsBpi2CmtsKeyRejectErrorString   OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in
+        the most recent Key Reject message sent in response to a
+        Key Request for this SAID.  This is a zero length string if
+        no Key Reject message has been received since
+        registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.6 and 4.2.2.6."
+        ::= { docsBpi2CmtsTEKEntry 15 }
+
+   docsBpi2CmtsTEKInvalidErrorCode    OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               invalidKeySequence(6)
+                               }
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent TEK
+        Invalid message sent in association with this SAID.  This
+        has the value unknown(2) if the last Error-Code value was 0
+        and none(1) if no TEK Invalid message has been received
+        since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.8 and 4.2.2.15."
+        ::= { docsBpi2CmtsTEKEntry 16 }
+
+   docsBpi2CmtsTEKInvalidErrorString  OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in
+        the most recent TEK Invalid message sent in association
+        with this SAID.  This is a zero length string if no TEK
+        Invalid message has been received since registration."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.8 and 4.2.2.6."
+        ::= { docsBpi2CmtsTEKEntry 17 }
+
+   --
+   -- The CMTS Multicast Objects Group
+   --
+
+   docsBpi2CmtsMulticastObjects OBJECT IDENTIFIER
+        ::= { docsBpi2CmtsObjects 4 }
+
+   --
+   -- The CMTS IP Multicast Mapping Table, indexed by
+   -- docsBpi2CmtsIpMulticastIndex, and by ifIndex
+   --
+
+   docsBpi2CmtsIpMulticastMapTable         OBJECT-TYPE
+        SYNTAX         SEQUENCE OF DocsBpi2CmtsIpMulticastMapEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table maps multicast IP addresses to SAIDs.
+        If a multicast IP address is mapped by multiple rows
+        in the table, the row with the lowest
+        docsBpi2CmtsIpMulticastIndex must be utilized for the
+        mapping."
+        ::= { docsBpi2CmtsMulticastObjects 1 }
+
+   docsBpi2CmtsIpMulticastMapEntry         OBJECT-TYPE
+        SYNTAX         DocsBpi2CmtsIpMulticastMapEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "Each entry contains objects describing the mapping of
+        a set of multicast IP address and the mask to one SAID
+        associated to a CMTS MAC Interface, as well as associated
+        message counters and error information."
+        INDEX     { ifIndex, docsBpi2CmtsIpMulticastIndex }
+        ::= { docsBpi2CmtsIpMulticastMapTable 1 }
+
+   DocsBpi2CmtsIpMulticastMapEntry ::= SEQUENCE {
+        docsBpi2CmtsIpMulticastIndex            Unsigned32,
+        docsBpi2CmtsIpMulticastAddressType      InetAddressType,
+        docsBpi2CmtsIpMulticastAddress          InetAddress,
+        docsBpi2CmtsIpMulticastMask             InetAddress,
+        docsBpi2CmtsIpMulticastSAId             DocsSAIdOrZero,
+        docsBpi2CmtsIpMulticastSAType           DocsBpkmSAType,
+        docsBpi2CmtsIpMulticastDataEncryptAlg
+                                        DocsBpkmDataEncryptAlg,
+        docsBpi2CmtsIpMulticastDataAuthentAlg
+                                        DocsBpkmDataAuthentAlg,
+        docsBpi2CmtsIpMulticastSAMapRequests    Counter32,
+        docsBpi2CmtsIpMulticastSAMapReplies     Counter32,
+        docsBpi2CmtsIpMulticastSAMapRejects     Counter32,
+        docsBpi2CmtsIpMulticastSAMapRejectErrorCode
+                                                   INTEGER,
+        docsBpi2CmtsIpMulticastSAMapRejectErrorString
+                                                   SnmpAdminString,
+        docsBpi2CmtsIpMulticastMapControl          RowStatus,
+        docsBpi2CmtsIpMulticastMapStorageType      StorageType
+        }
+
+   docsBpi2CmtsIpMulticastIndex       OBJECT-TYPE
+        SYNTAX         Unsigned32 (1..4294967295)
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The index of this row.  Conceptual rows having the
+        value 'permanent' need not allow write-access to any
+        columnar objects in the row."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 1 }
+
+   docsBpi2CmtsIpMulticastAddressType OBJECT-TYPE
+        SYNTAX         InetAddressType
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The type of Internet address for
+        docsBpi2CmtsIpMulticastAddress
+        and docsBpi2CmtsIpMulticastMask."
+        DEFVAL { ipv4 }
+        ::= { docsBpi2CmtsIpMulticastMapEntry 2 }
+
+   docsBpi2CmtsIpMulticastAddress          OBJECT-TYPE
+        SYNTAX         InetAddress
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "This object represents the IP multicast address
+        to be mapped, in conjunction with
+        docsBpi2CmtsIpMulticastMask.  The type of this address is
+        determined by the value of the object
+        docsBpi2CmtsIpMulticastAddressType."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 3 }
+
+   docsBpi2CmtsIpMulticastMask        OBJECT-TYPE
+        SYNTAX         InetAddress
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "This object represents the IP multicast address mask
+        for this row.
+        An IP multicast address matches this row if the logical
+        AND of the address with docsBpi2CmtsIpMulticastMask is
+        identical to the logical AND of
+        docsBpi2CmtsIpMulticastAddr with
+        docsBpi2CmtsIpMulticastMask.  The type of this address is
+        determined by the value of the object
+        docsBpi2CmtsIpMulticastAddressType.
+        Note: For IPv6, this object need not represent a
+        contiguous netmask; e.g., to associate a SAID to a
+        multicast group matching 'any' multicast scope.  The TC
+
+        InetAddressPrefixLength is not used, as it only
+        represents contiguous netmask."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 4 }
+
+   docsBpi2CmtsIpMulticastSAId        OBJECT-TYPE
+        SYNTAX         DocsSAIdOrZero
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "This object represents the multicast SAID to be
+        used in this IP multicast address mapping entry."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 5 }
+
+   docsBpi2CmtsIpMulticastSAType OBJECT-TYPE
+        SYNTAX         DocsBpkmSAType
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the type of security
+        association.  'dynamic' does not apply to CMs running in
+        BPI mode.  Unicast BPI TEKs must utilize the 'primary'
+        encoding, and multicast BPI TEKs must utilize the 'static'
+        encoding.  By default, SNMP created entries set this object
+        to 'static' if not set at row creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 2.1.3."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 6 }
+
+   docsBpi2CmtsIpMulticastDataEncryptAlg   OBJECT-TYPE
+        SYNTAX    DocsBpkmDataEncryptAlg
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data encryption
+        algorithm for this IP."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        DEFVAL { des56CbcMode }
+        ::= { docsBpi2CmtsIpMulticastMapEntry 7 }
+
+   docsBpi2CmtsIpMulticastDataAuthentAlg   OBJECT-TYPE
+        SYNTAX    DocsBpkmDataAuthentAlg
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the data authentication
+
+        algorithm for this IP."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.2.20."
+        DEFVAL { none }
+        ::= { docsBpi2CmtsIpMulticastMapEntry 8 }
+
+   docsBpi2CmtsIpMulticastSAMapRequests    OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has received an SA Map Request message for this IP.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.10."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 9 }
+
+   docsBpi2CmtsIpMulticastSAMapReplies     OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an SA Map Reply message for this IP.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.11."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 10 }
+
+   docsBpi2CmtsIpMulticastSAMapRejects     OBJECT-TYPE
+        SYNTAX         Counter32
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the number of times the
+        CMTS has transmitted an SA Map Reject message for this IP.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+
+        times as indicated by the value of
+        ifCounterDiscontinuityTime."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 4.2.1.12."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 11 }
+
+   docsBpi2CmtsIpMulticastSAMapRejectErrorCode  OBJECT-TYPE
+        SYNTAX         INTEGER {
+                               none(1),
+                               unknown(2),
+                               noAuthForRequestedDSFlow(9),
+                               dsFlowNotMappedToSA(10)
+                               }
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the enumerated
+        description of the Error-Code in the most recent SA Map
+        Reject message sent in response to an SA Map Request for
+        this IP.  It has the value unknown(2) if the last Error-Code
+        Value was 0 and none(1) if no SA MAP Reject message has
+        been received since entry creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.12 and 4.2.2.15."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 12 }
+
+   docsBpi2CmtsIpMulticastSAMapRejectErrorString     OBJECT-TYPE
+        SYNTAX         SnmpAdminString (SIZE (0..128))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The value of this object is the text string in
+        the most recent SA Map Reject message sent in response to
+        an SA Map Request for this IP.  It is a zero length string
+        if no SA Map Reject message has been received since entry
+        creation."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections 4.2.1.12 and 4.2.2.6."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 13 }
+
+   docsBpi2CmtsIpMulticastMapControl  OBJECT-TYPE
+        SYNTAX         RowStatus
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "This object controls and reflects the IP multicast
+        address mapping entry.  There is no restriction on the
+        ability to change values in this row while the row is
+        active.
+        A created row can be set to active only after the
+        Corresponding instances of docsBpi2CmtsIpMulticastAddress,
+        docsBpi2CmtsIpMulticastMask, docsBpi2CmtsIpMulticastSAId,
+        and docsBpi2CmtsIpMulticastSAType have all been set."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 14 }
+
+   docsBpi2CmtsIpMulticastMapStorageType     OBJECT-TYPE
+        SYNTAX         StorageType
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent' need not allow
+        write-access to any columnar objects in the row."
+        ::= { docsBpi2CmtsIpMulticastMapEntry 15 }
+
+   --
+   -- The CMTS Multicast SAID Authorization Table,
+   -- indexed by ifIndex by
+   -- multicast SAID by CM MAC address
+   --
+
+   docsBpi2CmtsMulticastAuthTable          OBJECT-TYPE
+        SYNTAX         SEQUENCE OF DocsBpi2CmtsMulticastAuthEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table describes the multicast SAID
+        authorization for each CM on each CMTS MAC interface."
+        ::= { docsBpi2CmtsMulticastObjects 2 }
+
+   docsBpi2CmtsMulticastAuthEntry          OBJECT-TYPE
+        SYNTAX         DocsBpi2CmtsMulticastAuthEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "Each entry contains objects describing the key
+        authorization of one cable modem for one multicast SAID
+        for one CMTS MAC interface.
+        Row entries persist after re-initialization of
+        the managed system."
+        INDEX     { ifIndex, docsBpi2CmtsMulticastAuthSAId,
+               docsBpi2CmtsMulticastAuthCmMacAddress }
+        ::= { docsBpi2CmtsMulticastAuthTable 1 }
+
+   DocsBpi2CmtsMulticastAuthEntry ::= SEQUENCE
+        {
+        docsBpi2CmtsMulticastAuthSAId                DocsSAId,
+        docsBpi2CmtsMulticastAuthCmMacAddress        MacAddress,
+        docsBpi2CmtsMulticastAuthControl             RowStatus
+        }
+
+   docsBpi2CmtsMulticastAuthSAId OBJECT-TYPE
+        SYNTAX         DocsSAId
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This object represents the multicast SAID for
+        authorization."
+        ::= { docsBpi2CmtsMulticastAuthEntry 1 }
+
+   docsBpi2CmtsMulticastAuthCmMacAddress   OBJECT-TYPE
+        SYNTAX         MacAddress
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This object represents the MAC address of the CM
+        to which the multicast SAID authorization applies."
+        ::= { docsBpi2CmtsMulticastAuthEntry 2 }
+
+   docsBpi2CmtsMulticastAuthControl   OBJECT-TYPE
+        SYNTAX         RowStatus
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The status of this conceptual row for the
+        authorization of multicast SAIDs to CMs."
+        ::= { docsBpi2CmtsMulticastAuthEntry 3 }
+
+   --
+   -- CMTS Cert Objects
+   --
+
+   docsBpi2CmtsCertObjects OBJECT IDENTIFIER
+        ::= { docsBpi2CmtsObjects 5 }
+
+   --
+   -- CMTS Provisioned CM Cert Table
+   --
+
+   docsBpi2CmtsProvisionedCmCertTable OBJECT-TYPE
+        SYNTAX         SEQUENCE OF
+                        DocsBpi2CmtsProvisionedCmCertEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "A table of CM certificate trust entries provisioned
+        to the CMTS.  The trust object for a certificate in this
+        table has an overriding effect on the validity object of a
+        certificate in the authorization table, as long as the
+        entire contents of the two certificates are identical."
+        ::= { docsBpi2CmtsCertObjects 1 }
+
+   docsBpi2CmtsProvisionedCmCertEntry OBJECT-TYPE
+        SYNTAX         DocsBpi2CmtsProvisionedCmCertEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "An entry in the CMTS's provisioned CM certificate
+        table.  Row entries persist after re-initialization of
+        the managed system."
+        REFERENCE
+             "Data-Over-Cable Service Interface Specifications:
+        Operations Support System Interface Specification
+        SP-OSSIv2.0-I05-040407, Section 6.2.14"
+        INDEX { docsBpi2CmtsProvisionedCmCertMacAddress }
+        ::= { docsBpi2CmtsProvisionedCmCertTable 1 }
+
+   DocsBpi2CmtsProvisionedCmCertEntry ::= SEQUENCE
+        {
+        docsBpi2CmtsProvisionedCmCertMacAddress MacAddress,
+        docsBpi2CmtsProvisionedCmCertTrust      INTEGER,
+        docsBpi2CmtsProvisionedCmCertSource     INTEGER,
+        docsBpi2CmtsProvisionedCmCertStatus     RowStatus,
+        docsBpi2CmtsProvisionedCmCert
+                                  DocsX509ASN1DEREncodedCertificate
+        }
+
+   docsBpi2CmtsProvisionedCmCertMacAddress OBJECT-TYPE
+        SYNTAX         MacAddress
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The index of this row."
+        ::= { docsBpi2CmtsProvisionedCmCertEntry 1 }
+
+   docsBpi2CmtsProvisionedCmCertTrust      OBJECT-TYPE
+        SYNTAX    INTEGER {
+                          trusted(1),
+                          untrusted(2)
+                          }
+        MAX-ACCESS     read-create
+        STATUS    current
+        DESCRIPTION
+             "Trust state for the provisioned CM certificate entry.
+        Note: Setting this object need only override the validity
+        of CM certificates sent in future authorization requests;
+        instantaneous effect need not occur."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.1."
+        DEFVAL { untrusted }
+        ::= { docsBpi2CmtsProvisionedCmCertEntry 2 }
+
+   docsBpi2CmtsProvisionedCmCertSource     OBJECT-TYPE
+        SYNTAX    INTEGER {
+                          snmp(1),
+                          configurationFile(2),
+                          externalDatabase(3),
+                          other(4)
+                          }
+        MAX-ACCESS read-only
+        STATUS  current
+        DESCRIPTION
+             "This object indicates how the certificate reached the
+        CMTS.  Other(4) means that it originated from a source not
+        identified above."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.1."
+        ::= { docsBpi2CmtsProvisionedCmCertEntry 3 }
+
+   docsBpi2CmtsProvisionedCmCertStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS read-create
+        STATUS  current
+        DESCRIPTION
+             "The status of this conceptual row.  Values in this row
+        cannot be changed while the row is 'active'."
+        ::= { docsBpi2CmtsProvisionedCmCertEntry 4 }
+
+   docsBpi2CmtsProvisionedCmCert OBJECT-TYPE
+        SYNTAX         DocsX509ASN1DEREncodedCertificate
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "An X509 DER-encoded Certificate Authority
+        certificate.
+        Note: The zero-length OCTET STRING must be returned, on
+
+        reads, if the entire certificate is not retained in the
+        CMTS."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2."
+        ::= { docsBpi2CmtsProvisionedCmCertEntry 5 }
+
+   --
+   -- CMTS CA Cert Table
+   --
+
+   docsBpi2CmtsCACertTable OBJECT-TYPE
+        SYNTAX         SEQUENCE OF DocsBpi2CmtsCACertEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The table of known Certificate Authority certificates
+        acquired by this device."
+        ::= { docsBpi2CmtsCertObjects 2 }
+
+   docsBpi2CmtsCACertEntry OBJECT-TYPE
+        SYNTAX         DocsBpi2CmtsCACertEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "A row in the Certificate Authority certificate
+        table.  Row entries with the trust status 'trusted',
+        'untrusted', or 'root' persist after re-initialization
+         of the managed system."
+        REFERENCE
+             "Data-Over-Cable Service Interface Specifications:
+        Operations Support System Interface Specification
+        SP-OSSIv2.0-I05-040407, Section 6.2.14"
+        INDEX   { docsBpi2CmtsCACertIndex }
+        ::= {docsBpi2CmtsCACertTable 1 }
+
+   DocsBpi2CmtsCACertEntry ::= SEQUENCE {
+        docsBpi2CmtsCACertIndex            Unsigned32,
+        docsBpi2CmtsCACertSubject          SnmpAdminString,
+        docsBpi2CmtsCACertIssuer           SnmpAdminString,
+        docsBpi2CmtsCACertSerialNumber     OCTET STRING,
+        docsBpi2CmtsCACertTrust            INTEGER,
+        docsBpi2CmtsCACertSource           INTEGER,
+        docsBpi2CmtsCACertStatus           RowStatus,
+        docsBpi2CmtsCACert
+                              DocsX509ASN1DEREncodedCertificate,
+        docsBpi2CmtsCACertThumbprint       OCTET STRING
+   }
+
+   docsBpi2CmtsCACertIndex OBJECT-TYPE
+        SYNTAX         Unsigned32 (1.. 4294967295)
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The index for this row."
+        ::= { docsBpi2CmtsCACertEntry 1 }
+
+   docsBpi2CmtsCACertSubject OBJECT-TYPE
+        SYNTAX         SnmpAdminString
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The subject name exactly as it is encoded in the
+        X509 certificate.
+        The organizationName portion of the certificate's subject
+        name must be present.  All other fields are optional.  Any
+        optional field present must be prepended with <CR>
+        (carriage return, U+000D) <LF> (line feed, U+000A).
+        Ordering of fields present must conform to the following:
+
+        organizationName <CR> <LF>
+        countryName <CR> <LF>
+        stateOrProvinceName <CR> <LF>
+        localityName <CR> <LF>
+        organizationalUnitName <CR> <LF>
+        organizationalUnitName=<Manufacturing Location> <CR> <LF>
+        commonName"
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2.4"
+        ::= { docsBpi2CmtsCACertEntry 2 }
+
+   docsBpi2CmtsCACertIssuer OBJECT-TYPE
+        SYNTAX         SnmpAdminString
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The issuer name exactly as it is encoded in the
+        X509 certificate.
+        The commonName portion of the certificate's issuer
+        name must be present.  All other fields are optional.  Any
+        optional field present must be prepended with <CR>
+        (carriage return, U+000D) <LF> (line feed, U+000A).
+        Ordering of fields present must conform to the following:
+
+        CommonName <CR><LF>
+        countryName <CR><LF>
+
+        stateOrProvinceName <CR><LF>
+        localityName <CR><LF>
+        organizationName <CR><LF>
+        organizationalUnitName <CR><LF>
+        organizationalUnitName=<Manufacturing Location>"
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2.4"
+        ::= { docsBpi2CmtsCACertEntry 3 }
+
+   docsBpi2CmtsCACertSerialNumber OBJECT-TYPE
+        SYNTAX         OCTET STRING (SIZE (1..32))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "This CA certificate's serial number, represented as
+        an octet string."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2.2"
+        ::= { docsBpi2CmtsCACertEntry 4 }
+
+   docsBpi2CmtsCACertTrust OBJECT-TYPE
+        SYNTAX    INTEGER {
+                          trusted (1),
+                          untrusted (2),
+                          chained (3),
+                          root (4)
+                          }
+        MAX-ACCESS     read-create
+        STATUS    current
+        DESCRIPTION
+             "This object controls the trust status of this
+        certificate.  Root certificates must be given root(4)
+        trust; manufacturer certificates must not be given root(4)
+        trust.  Trust on root certificates must not change.
+        Note: Setting this object need only affect the validity of
+        CM certificates sent in future authorization requests;
+        instantaneous effect need not occur."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.1"
+        DEFVAL { chained }
+        ::= { docsBpi2CmtsCACertEntry 5 }
+
+   docsBpi2CmtsCACertSource OBJECT-TYPE
+        SYNTAX    INTEGER {
+                  snmp (1),
+                  configurationFile (2),
+                  externalDatabase (3),
+                  other (4),
+                  authentInfo (5),
+                  compiledIntoCode (6)
+                  }
+        MAX-ACCESS     read-only
+        STATUS    current
+        DESCRIPTION
+             "This object indicates how the certificate reached
+        the CMTS.  Other(4) means that it originated from a source
+        not identified above."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.1"
+        ::= { docsBpi2CmtsCACertEntry 6 }
+
+   docsBpi2CmtsCACertStatus OBJECT-TYPE
+        SYNTAX         RowStatus
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The status of this conceptual row.  An attempt
+        to set writable columnar values while this row is active
+        behaves as follows:
+        - Sets to the object docsBpi2CmtsCACertTrust are allowed.
+        - Sets to the object docsBpi2CmtsCACert will return an
+          error of 'inconsistentValue'.
+        A newly created entry cannot be set to active until the
+        value of docsBpi2CmtsCACert is being set."
+        ::= { docsBpi2CmtsCACertEntry 7 }
+
+   docsBpi2CmtsCACert  OBJECT-TYPE
+        SYNTAX         DocsX509ASN1DEREncodedCertificate
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "An X509 DER-encoded Certificate Authority
+        certificate.
+        To help identify certificates, either this object or
+        docsBpi2CmtsCACertThumbprint must be returned by a CMTS for
+        self-signed CA certificates.
+
+        Note: The zero-length OCTET STRING must be returned, on
+        reads, if the entire certificate is not retained in the
+        CMTS."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.2."
+        ::= { docsBpi2CmtsCACertEntry 8 }
+
+   docsBpi2CmtsCACertThumbprint OBJECT-TYPE
+        SYNTAX         OCTET STRING (SIZE (20))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+             "The SHA-1 hash of a CA certificate.
+        To help identify certificates, either this object or
+        docsBpi2CmtsCACert must be returned by a CMTS for
+        self-signed CA certificates.
+
+        Note: The zero-length OCTET STRING must be returned, on
+        reads, if the CA certificate thumb print is not retained
+        in the CMTS."
+        REFERENCE
+             "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section 9.4.3"
+        ::= { docsBpi2CmtsCACertEntry 9 }
+
+   --
+   -- Authenticated Software Download Objects
+   --
+
+   --
+   -- Note: the authenticated software download objects are a
+   -- CM requirement only.
+   --
+
+   docsBpi2CodeDownloadControl OBJECT IDENTIFIER
+        ::= { docsBpi2MIBObjects 4 }
+
+   docsBpi2CodeDownloadStatusCode     OBJECT-TYPE
+        SYNTAX    INTEGER {
+                          configFileCvcVerified (1),
+                          configFileCvcRejected (2),
+                          snmpCvcVerified (3),
+                          snmpCvcRejected (4),
+                          codeFileVerified (5),
+                          codeFileRejected (6),
+                          other (7)
+                          }
+        MAX-ACCESS     read-only
+        STATUS    current
+        DESCRIPTION
+            "The value indicates the result of the latest config
+        file CVC verification, SNMP CVC verification, or code file
+
+        verification."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Sections D.3.3.2 and D.3.5.1."
+        ::= { docsBpi2CodeDownloadControl 1 }
+
+   docsBpi2CodeDownloadStatusString   OBJECT-TYPE
+        SYNTAX         SnmpAdminString
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object indicates the additional
+        information to the status code.  The value will include
+        the error code and error description, which will be defined
+        separately."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.7"
+        ::= { docsBpi2CodeDownloadControl 2 }
+
+   docsBpi2CodeMfgOrgName   OBJECT-TYPE
+        SYNTAX         SnmpAdminString
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object is the device manufacturer's
+        organizationName."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 3 }
+
+   docsBpi2CodeMfgCodeAccessStart     OBJECT-TYPE
+        SYNTAX         DateAndTime  (SIZE(11))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object is the device manufacturer's
+        current codeAccessStart value.  This value will always
+        refer to Greenwich Mean Time (GMT), and the value
+        format must contain TimeZone information (fields 8-10)."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 4 }
+
+   docsBpi2CodeMfgCvcAccessStart OBJECT-TYPE
+        SYNTAX         DateAndTime (SIZE(11))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object is the device manufacturer's
+        current cvcAccessStart value.  This value will always
+        refer to Greenwich Mean Time (GMT), and the value
+        format must contain TimeZone information (fields 8-10)."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 5 }
+
+   docsBpi2CodeCoSignerOrgName   OBJECT-TYPE
+        SYNTAX         SnmpAdminString
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object is the co-signer's
+        organizationName.  The value is a zero length string if
+        the co-signer is not specified."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 6 }
+
+   docsBpi2CodeCoSignerCodeAccessStart     OBJECT-TYPE
+        SYNTAX         DateAndTime (SIZE(11))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object is the co-signer's current
+        codeAccessStart value.  This value will always refer to
+        Greenwich Mean Time (GMT), and the value format must contain
+        TimeZone information (fields 8-10).
+        If docsBpi2CodeCoSignerOrgName is a zero
+        length string, the value of this object is meaningless."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 7 }
+
+   docsBpi2CodeCoSignerCvcAccessStart OBJECT-TYPE
+        SYNTAX         DateAndTime (SIZE(11))
+        MAX-ACCESS     read-only
+        STATUS         current
+        DESCRIPTION
+            "The value of this object is the co-signer's current
+        cvcAccessStart value.  This value will always refer to
+
+        Greenwich Mean Time (GMT), and the value format must contain
+        TimeZone information (fields 8-10).
+        If docsBpi2CodeCoSignerOrgName is a zero
+        length string, the value of this object is meaningless."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 8 }
+
+   docsBpi2CodeCvcUpdate    OBJECT-TYPE
+        SYNTAX         DocsX509ASN1DEREncodedCertificate
+        MAX-ACCESS     read-write
+        STATUS         current
+        DESCRIPTION
+            "Setting a CVC to this object triggers the device
+        to verify the CVC and update the cvcAccessStart values.
+        The content of this object is then discarded.
+        If the device is not enabled to upgrade codefiles, or if
+        the CVC verification fails, the CVC will be rejected.
+        Reading this object always returns the zero-length OCTET
+        STRING."
+        REFERENCE
+            "DOCSIS Baseline Privacy Plus Interface Specification,
+        Section D.3.3.2.2."
+        ::= { docsBpi2CodeDownloadControl 9 }
+
+   --
+   -- The BPI+ MIB Conformance Statements (with a placeholder for
+   -- notifications)
+   --
+
+   docsBpi2Notification     OBJECT IDENTIFIER
+        ::= { docsBpi2MIB 0 }
+   docsBpi2Conformance OBJECT IDENTIFIER
+        ::= { docsBpi2MIB 2 }
+   docsBpi2Compliances OBJECT IDENTIFIER
+        ::= { docsBpi2Conformance 1 }
+   docsBpi2Groups      OBJECT IDENTIFIER
+        ::= { docsBpi2Conformance 2 }
+
+   docsBpi2CmCompliance MODULE-COMPLIANCE
+        STATUS         current
+        DESCRIPTION
+             "This is the compliance statement for CMs that
+        implement the DOCSIS Baseline Privacy Interface Plus."
+
+        MODULE  -- docsBpi2MIB
+
+        -- unconditionally mandatory group
+        MANDATORY-GROUPS {
+               docsBpi2CmGroup,
+               docsBpi2CodeDownloadGroup
+        }
+
+   -- constrain on Encryption algorithms
+   OBJECT docsBpi2CmTEKDataEncryptAlg
+        SYNTAX    DocsBpkmDataEncryptAlg {
+                               none(0),
+                               des56CbcMode(1),
+                               des40CbcMode(2)
+                  }
+        DESCRIPTION
+             "It is compliant to support des56CbcMode(1) and
+        des40CbcMode(2) for data encryption algorithms."
+
+   -- constrain on Integrity algorithms
+   OBJECT docsBpi2CmTEKDataAuthentAlg
+        SYNTAX    DocsBpkmDataAuthentAlg {
+                               none(0)
+                  }
+        DESCRIPTION
+             "It is compliant to not support data message
+        authentication algorithms."
+
+   -- constrain on IP addressing
+   OBJECT    docsBpi2CmIpMulticastAddressType
+        SYNTAX InetAddressType { ipv4(1) }
+        DESCRIPTION
+             "An implementation is only required to support IPv4
+        addresses.  Support for other address types may be defined
+        in future versions of this MIB module."
+
+   -- constrain on IP addressing
+   OBJECT    docsBpi2CmIpMulticastAddress
+        SYNTAX  InetAddress (SIZE(4))
+        DESCRIPTION
+             "An implementation is only required to support IPv4
+        addresses Other address types support may be defined in
+        future versions of this MIB module."
+
+   -- constrain on Encryption algorithms
+   OBJECT docsBpi2CmCryptoSuiteDataEncryptAlg
+        SYNTAX    DocsBpkmDataEncryptAlg {
+                               none(0),
+                               des56CbcMode(1),
+                               des40CbcMode(2)
+
+                  }
+        DESCRIPTION
+             "It is compliant to only support des56CbcMode(1)
+        and des40CbcMode(2) for data encryption algorithms."
+
+   -- constrain on Integrity algorithms
+   OBJECT docsBpi2CmCryptoSuiteDataAuthentAlg
+        SYNTAX    DocsBpkmDataAuthentAlg {
+                               none(0)
+                  }
+        DESCRIPTION
+             "It is compliant to not support data message
+        authentication algorithms."
+   ::= { docsBpi2Compliances 1 }
+
+   docsBpi2CmtsCompliance MODULE-COMPLIANCE
+        STATUS         current
+        DESCRIPTION
+             "This is the compliance statement for CMTSs that
+        implement the DOCSIS Baseline Privacy Interface Plus."
+
+        MODULE  -- docsBpi2MIB
+        -- unconditionally mandatory group
+        MANDATORY-GROUPS {
+               docsBpi2CmtsGroup
+        }
+
+   -- unconditionally optional group
+   GROUP     docsBpi2CodeDownloadGroup
+        DESCRIPTION
+             "This group is optional for CMTSes.  The implementation
+        decision of this group is left to the vendor"
+
+   -- constrain on mandatory range
+
+   OBJECT    docsBpi2CmtsDefaultAuthLifetime
+        SYNTAX    Integer32 (86400..6048000)
+        DESCRIPTION
+             "The refined range corresponds to the minimum and
+        maximum values in operational networks."
+
+   -- constrain on mandatory range
+
+   OBJECT    docsBpi2CmtsDefaultTEKLifetime
+        SYNTAX    Integer32 (1800..604800)
+        DESCRIPTION
+            "The refined range corresponds to the minimum and
+        maximum values in operational networks."
+
+   -- constrain on mandatory range
+
+   OBJECT    docsBpi2CmtsAuthCmLifetime
+        SYNTAX    Integer32 (86400..6048000)
+        DESCRIPTION
+            "The refined range corresponds to the minimum and
+        maximum values in operational networks."
+
+   -- constrain on Encryption algorithms
+
+OBJECT   docsBpi2CmtsTEKDataEncryptAlg
+        SYNTAX    DocsBpkmDataEncryptAlg {
+                               none(0),
+                               des56CbcMode(1),
+                               des40CbcMode(2)
+                  }
+        DESCRIPTION
+             "It is compliant to only support des56CbcMode(1)
+        and des40CbcMode(2) for data encryption."
+
+   -- constrain on Integrity algorithms
+
+OBJECT docsBpi2CmtsTEKDataAuthentAlg
+        SYNTAX    DocsBpkmDataAuthentAlg {
+                               none(0)
+                  }
+        DESCRIPTION
+             "It is compliant to not support data message
+        authentication algorithms."
+
+   -- constrain on mandatory range
+
+   OBJECT    docsBpi2CmtsTEKLifetime
+        SYNTAX    Integer32 (1800..604800)
+        DESCRIPTION
+            "The refined range corresponds to the minimum and
+        maximum values in operational networks."
+
+   -- constrain on access
+   -- constrain on IP Addressing
+
+   OBJECT    docsBpi2CmtsIpMulticastAddressType
+        SYNTAX      InetAddressType { ipv4(1) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+        An implementation is only required to support IPv4
+        addresses.  Support for other address types may be defined
+        in future versions of this MIB module."
+
+   OBJECT    docsBpi2CmtsIpMulticastAddress
+        SYNTAX  InetAddress (SIZE(4))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+        An implementation is only required to support IPv4
+        addresses.  Support for other address types may be defined
+        in future versions of this MIB module."
+
+   OBJECT    docsBpi2CmtsIpMulticastMask
+        SYNTAX  InetAddress (SIZE(4))
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+        An implementation is only required to support IPv4
+        addresses.  Support for other address types may be defined
+        in future versions of this MIB module."
+
+   -- constrain on access
+
+   OBJECT    docsBpi2CmtsIpMulticastSAId
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+   OBJECT    docsBpi2CmtsIpMulticastSAType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+   -- constrain on access
+   -- constrain on Encryption algorithms
+
+   OBJECT    docsBpi2CmtsIpMulticastDataEncryptAlg
+        SYNTAX    DocsBpkmDataEncryptAlg {
+                               none(0),
+                               des56CbcMode(1),
+                               des40CbcMode(2)
+                  }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+        It is compliant to only support des56CbcMode(1)
+
+        and des40CbcMode(2) for data encryption"
+
+   -- constrain on access
+   -- constrain on Integrity algorithms
+
+   OBJECT    docsBpi2CmtsIpMulticastDataAuthentAlg
+        SYNTAX    DocsBpkmDataAuthentAlg {
+                               none(0)
+                  }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+        It is compliant to not support data message
+        authentication algorithms."
+
+   -- constrain on access
+
+   OBJECT    docsBpi2CmtsMulticastAuthControl
+        MIN-ACCESS  read-only
+        DESCRIPTION
+       "Write access is not required."
+        ::= { docsBpi2Compliances 2 }
+
+   docsBpi2CmGroup     OBJECT-GROUP
+        OBJECTS   {
+             docsBpi2CmPrivacyEnable,
+             docsBpi2CmPublicKey,
+             docsBpi2CmAuthState,
+             docsBpi2CmAuthKeySequenceNumber,
+             docsBpi2CmAuthExpiresOld,
+             docsBpi2CmAuthExpiresNew,
+             docsBpi2CmAuthReset,
+             docsBpi2CmAuthGraceTime,
+             docsBpi2CmTEKGraceTime,
+             docsBpi2CmAuthWaitTimeout,
+             docsBpi2CmReauthWaitTimeout,
+             docsBpi2CmOpWaitTimeout,
+             docsBpi2CmRekeyWaitTimeout,
+             docsBpi2CmAuthRejectWaitTimeout,
+             docsBpi2CmSAMapWaitTimeout,
+             docsBpi2CmSAMapMaxRetries,
+             docsBpi2CmAuthentInfos,
+             docsBpi2CmAuthRequests,
+             docsBpi2CmAuthReplies,
+             docsBpi2CmAuthRejects,
+             docsBpi2CmAuthInvalids,
+             docsBpi2CmAuthRejectErrorCode,
+             docsBpi2CmAuthRejectErrorString,
+             docsBpi2CmAuthInvalidErrorCode,
+             docsBpi2CmAuthInvalidErrorString,
+             docsBpi2CmTEKSAType,
+             docsBpi2CmTEKDataEncryptAlg,
+             docsBpi2CmTEKDataAuthentAlg,
+             docsBpi2CmTEKState,
+             docsBpi2CmTEKKeySequenceNumber,
+             docsBpi2CmTEKExpiresOld,
+             docsBpi2CmTEKExpiresNew,
+             docsBpi2CmTEKKeyRequests,
+             docsBpi2CmTEKKeyReplies,
+             docsBpi2CmTEKKeyRejects,
+             docsBpi2CmTEKInvalids,
+             docsBpi2CmTEKAuthPends,
+             docsBpi2CmTEKKeyRejectErrorCode,
+             docsBpi2CmTEKKeyRejectErrorString,
+             docsBpi2CmTEKInvalidErrorCode,
+             docsBpi2CmTEKInvalidErrorString,
+             docsBpi2CmIpMulticastAddressType,
+             docsBpi2CmIpMulticastAddress,
+             docsBpi2CmIpMulticastSAId,
+             docsBpi2CmIpMulticastSAMapState,
+             docsBpi2CmIpMulticastSAMapRequests,
+             docsBpi2CmIpMulticastSAMapReplies,
+             docsBpi2CmIpMulticastSAMapRejects,
+             docsBpi2CmIpMulticastSAMapRejectErrorCode,
+             docsBpi2CmIpMulticastSAMapRejectErrorString,
+             docsBpi2CmDeviceCmCert,
+             docsBpi2CmDeviceManufCert,
+             docsBpi2CmCryptoSuiteDataEncryptAlg,
+             docsBpi2CmCryptoSuiteDataAuthentAlg
+             }
+        STATUS         current
+        DESCRIPTION
+             "This collection of objects provides CM BPI+ status
+        and control."
+   ::= { docsBpi2Groups 1 }
+
+   docsBpi2CmtsGroup   OBJECT-GROUP
+        OBJECTS {
+             docsBpi2CmtsDefaultAuthLifetime,
+             docsBpi2CmtsDefaultTEKLifetime,
+             docsBpi2CmtsDefaultSelfSignedManufCertTrust,
+             docsBpi2CmtsCheckCertValidityPeriods,
+             docsBpi2CmtsAuthentInfos,
+             docsBpi2CmtsAuthRequests,
+             docsBpi2CmtsAuthReplies,
+             docsBpi2CmtsAuthRejects,
+             docsBpi2CmtsAuthInvalids,
+             docsBpi2CmtsSAMapRequests,
+             docsBpi2CmtsSAMapReplies,
+             docsBpi2CmtsSAMapRejects,
+             docsBpi2CmtsAuthCmBpiVersion,
+             docsBpi2CmtsAuthCmPublicKey,
+             docsBpi2CmtsAuthCmKeySequenceNumber,
+             docsBpi2CmtsAuthCmExpiresOld,
+             docsBpi2CmtsAuthCmExpiresNew,
+             docsBpi2CmtsAuthCmLifetime,
+             docsBpi2CmtsAuthCmReset,
+             docsBpi2CmtsAuthCmInfos,
+             docsBpi2CmtsAuthCmRequests,
+             docsBpi2CmtsAuthCmReplies,
+             docsBpi2CmtsAuthCmRejects,
+             docsBpi2CmtsAuthCmInvalids,
+             docsBpi2CmtsAuthRejectErrorCode,
+             docsBpi2CmtsAuthRejectErrorString,
+             docsBpi2CmtsAuthInvalidErrorCode,
+             docsBpi2CmtsAuthInvalidErrorString,
+             docsBpi2CmtsAuthPrimarySAId,
+             docsBpi2CmtsAuthBpkmCmCertValid,
+             docsBpi2CmtsAuthBpkmCmCert,
+             docsBpi2CmtsAuthCACertIndexPtr,
+             docsBpi2CmtsTEKSAType,
+             docsBpi2CmtsTEKDataEncryptAlg,
+             docsBpi2CmtsTEKDataAuthentAlg,
+             docsBpi2CmtsTEKLifetime,
+             docsBpi2CmtsTEKKeySequenceNumber,
+             docsBpi2CmtsTEKExpiresOld,
+             docsBpi2CmtsTEKExpiresNew,
+             docsBpi2CmtsTEKReset,
+             docsBpi2CmtsKeyRequests,
+             docsBpi2CmtsKeyReplies,
+             docsBpi2CmtsKeyRejects,
+             docsBpi2CmtsTEKInvalids,
+             docsBpi2CmtsKeyRejectErrorCode,
+             docsBpi2CmtsKeyRejectErrorString,
+             docsBpi2CmtsTEKInvalidErrorCode,
+             docsBpi2CmtsTEKInvalidErrorString,
+             docsBpi2CmtsIpMulticastAddressType,
+             docsBpi2CmtsIpMulticastAddress,
+             docsBpi2CmtsIpMulticastMask,
+             docsBpi2CmtsIpMulticastSAId,
+             docsBpi2CmtsIpMulticastSAType,
+             docsBpi2CmtsIpMulticastDataEncryptAlg,
+             docsBpi2CmtsIpMulticastDataAuthentAlg,
+             docsBpi2CmtsIpMulticastSAMapRequests,
+             docsBpi2CmtsIpMulticastSAMapReplies,
+             docsBpi2CmtsIpMulticastSAMapRejects,
+             docsBpi2CmtsIpMulticastSAMapRejectErrorCode,
+             docsBpi2CmtsIpMulticastSAMapRejectErrorString,
+             docsBpi2CmtsIpMulticastMapControl,
+             docsBpi2CmtsIpMulticastMapStorageType,
+             docsBpi2CmtsMulticastAuthControl,
+             docsBpi2CmtsProvisionedCmCertTrust,
+             docsBpi2CmtsProvisionedCmCertSource,
+             docsBpi2CmtsProvisionedCmCertStatus,
+             docsBpi2CmtsProvisionedCmCert,
+             docsBpi2CmtsCACertSubject,
+             docsBpi2CmtsCACertIssuer,
+             docsBpi2CmtsCACertSerialNumber,
+             docsBpi2CmtsCACertTrust,
+             docsBpi2CmtsCACertSource,
+             docsBpi2CmtsCACertStatus,
+             docsBpi2CmtsCACert,
+             docsBpi2CmtsCACertThumbprint
+             }
+        STATUS         current
+        DESCRIPTION
+             "This collection of objects provides CMTS BPI+ status
+        and control."
+   ::= { docsBpi2Groups 2 }
+
+   docsBpi2CodeDownloadGroup OBJECT-GROUP
+           OBJECTS {
+             docsBpi2CodeDownloadStatusCode,
+             docsBpi2CodeDownloadStatusString,
+             docsBpi2CodeMfgOrgName,
+             docsBpi2CodeMfgCodeAccessStart,
+             docsBpi2CodeMfgCvcAccessStart,
+             docsBpi2CodeCoSignerOrgName,
+             docsBpi2CodeCoSignerCodeAccessStart,
+             docsBpi2CodeCoSignerCvcAccessStart,
+             docsBpi2CodeCvcUpdate
+             }
+        STATUS         current
+        DESCRIPTION
+             "This collection of objects provides authenticated
+        software download support."
+   ::= { docsBpi2Groups 3 }
+
+   END
diff --git a/snmp_builder/mibs/DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB.mib b/snmp_builder/mibs/DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB.mib
new file mode 100644
index 0000000..8871633
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB.mib
@@ -0,0 +1,1453 @@
+DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+        MODULE-IDENTITY,
+        OBJECT-TYPE,
+        NOTIFICATION-TYPE,
+        mib-2
+              FROM SNMPv2-SMI -- RFC 2578
+        MODULE-COMPLIANCE,
+        OBJECT-GROUP,
+        NOTIFICATION-GROUP
+              FROM SNMPv2-CONF -- RFC 2580
+
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsDevSwFilename,
+        docsDevSwServer,
+        docsDevServerDhcp,
+        docsDevServerTime
+              FROM DOCS-CABLE-DEVICE-MIB -- RFC 2669
+
+        docsIfCmCmtsAddress,
+        docsIfCmtsCmStatusMacAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfCmtsCmStatusModulationType
+              FROM DOCS-IF-MIB -- RFC 4546
+
+        ifPhysAddress
+              FROM IF-MIB;  -- RFC 2863
+
+  docsDevNotifMIB MODULE-IDENTITY
+
+        LAST-UPDATED    "200605240000Z" -- May 24, 2006
+        ORGANIZATION    "IETF IP over Cable Data Network
+                         Working Group"
+
+        CONTACT-INFO
+            "        Azlina Ahmad
+             Postal: Cisco Systems, Inc.
+                     170 West Tasman Drive
+                     San Jose, CA 95134, U.S.A.
+             Phone:   408 853 7927
+             E-mail: azlina@cisco.com
+
+                     Greg Nakanishi
+             Postal: Motorola
+                     6450 Sequence Drive
+                     San Diego, CA 92121, U.S.A.
+             Phone:   858 404 2366
+             E-mail: gnakanishi@motorola.com
+
+             IETF IPCDN Working Group
+             General Discussion: ipcdn@ietf.org
+
+             Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+             Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+             Co-chairs: Richard Woundy,
+                          richard_woundy@cable.comcast.com
+                        Jean-Francois Mule, jf.mule@cablelabs.com"
+        DESCRIPTION
+            "The Event Notification MIB is an extension of the
+            CABLE DEVICE MIB.  It defines various notification
+            objects for both cable modem and cable modem termination
+            systems.  Two groups of SNMP notification objects are
+            defined.  One group is for notifying cable modem events,
+            and one group is for notifying cable modem termination
+            system events.
+
+            DOCSIS defines numerous events, and each event is
+            assigned to a functional category.  This MIB defines
+            a notification object for each functional category.
+            The varbinding list of each notification includes
+            information about the event that occurred on the
+            device.
+
+            Copyright (C) The Internet Society (2006).  This version
+            of this MIB module is part of RFC 4547; see the RFC
+            itself for full legal notices."
+
+        REVISION "200605240000Z" -- May 24, 2006
+        DESCRIPTION
+            "Initial version, published as RFC 4547."
+        ::= { mib-2 132 }
+
+docsDevNotifControl OBJECT IDENTIFIER ::= { docsDevNotifMIB 1}
+docsDevCmNotifs OBJECT IDENTIFIER ::= { docsDevNotifMIB 2 0 }
+docsDevCmtsNotifs OBJECT IDENTIFIER ::= { docsDevNotifMIB 3 0 }
+
+docsDevCmNotifControl OBJECT-TYPE
+    SYNTAX BITS {
+        cmInitTLVUnknownNotif( 0),
+        cmDynServReqFailNotif( 1),
+        cmDynServRspFailNotif( 2),
+        cmDynServAckFailNotif( 3),
+        cmBpiInitNotif( 4),
+        cmBPKMNotif( 5),
+        cmDynamicSANotif( 6),
+        cmDHCPFailNotif( 7),
+        cmSwUpgradeInitNotif( 8),
+        cmSwUpgradeFailNotif( 9),
+        cmSwUpgradeSuccessNotif( 10),
+        cmSwUpgradeCVCNotif( 11),
+        cmTODFailNotif( 12),
+        cmDCCReqFailNotif( 13),
+        cmDCCRspFailNotif( 14),
+        cmDCCAckFailNotif( 15)
+    }
+   MAX-ACCESS read-write
+   STATUS current
+   DESCRIPTION
+       "The object is used to enable specific CM notifications.
+        For example, if the first bit is set, then
+        docsDevCmInitTLVUnknownNotif is enabled.  If it is not set,
+        the notification is disabled.  Note that notifications are
+        also under the control of the MIB modules defined in
+        RFC3413.
+
+        If the device is rebooted,the value of this object SHOULD
+        revert to the default value.
+       "
+   DEFVAL { {} }
+   ::= { docsDevNotifControl 1 }
+
+docsDevCmtsNotifControl OBJECT-TYPE
+    SYNTAX BITS {
+        cmtsInitRegReqFailNotif( 0),
+        cmtsInitRegRspFailNotif( 1),
+        cmtsInitRegAckFailNotif( 2),
+        cmtsDynServReqFailNotif( 3),
+        cmtsDynServRspFailNotif( 4),
+        cmtsDynServAckFailNotif( 5),
+        cmtsBpiInitNotif( 6),
+        cmtsBPKMNotif( 7),
+        cmtsDynamicSANotif( 8),
+        cmtsDCCReqFailNotif( 9),
+        cmtsDCCRspFailNotif( 10),
+        cmtsDCCAckFailNotif( 11)
+    }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+       "The object is used to enable specific CMTS notifications.
+        For example, if the first bit is set, then
+        docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
+        the notification is disabled.  Note that notifications are
+        also under the control of the MIB modules defined in
+        RFC3413.
+
+        If the device is rebooted,the value of this object SHOULD
+        revert to the default value.
+       "
+    DEFVAL { {} }
+    ::= { docsDevNotifControl 2 }
+
+docsDevCmInitTLVUnknownNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "Notification to indicate that an unknown TLV was
+          encountered during the TLV parsing process.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 1 }
+
+docsDevCmDynServReqFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic service
+         request during the dynamic services process.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected to (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 2 }
+
+docsDevCmDynServRspFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        " A notification to report the failure of a dynamic service
+         response during the dynamic services process.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 3}
+
+docsDevCmDynServAckFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic service
+         acknowledgement during the dynamic services process.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 4}
+
+docsDevCmBpiInitNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a BPI
+         initialization attempt during the registration process.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 5 }
+
+docsDevCmBPKMNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a Baseline
+         Privacy Key Management (BPKM) operation.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 6 }
+
+docsDevCmDynamicSANotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic security
+         association operation.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 7 }
+
+docsDevCmDHCPFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsDevServerDhcp,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a DHCP operation.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsDevServerDhcp: the IP address of the DHCP server.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 8 }
+
+docsDevCmSwUpgradeInitNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsDevSwFilename,
+        docsDevSwServer,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to indicate that a software upgrade
+         has been initiated on the device.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 9 }
+
+docsDevCmSwUpgradeFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsDevSwFilename,
+        docsDevSwServer,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a software upgrade
+         attempt.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsDevSwFilename: the software image file name
+         - docsDevSwServer: the IP address of the server that
+           the image is retrieved from.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 10 }
+
+docsDevCmSwUpgradeSuccessNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsDevSwFilename,
+        docsDevSwServer,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the software upgrade success
+         status.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsDevSwFilename: the software image file name
+         - docsDevSwServer: the IP address of the server that
+           the image is retrieved from.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 11 }
+
+docsDevCmSwUpgradeCVCFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report that the verification of the
+         code file has failed during a secure software upgrade
+         attempt.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 12 }
+
+docsDevCmTODFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsDevServerTime,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a time of day
+
+         operation.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsDevServerTime: the IP address of the time server.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 13 }
+
+docsDevCmDCCReqFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        " A notification to report the failure of a dynamic channel
+         change request during the dynamic channel change process
+         on the CM.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 14 }
+
+docsDevCmDCCRspFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic channel
+         change response during the dynamic channel
+         change process on the CM.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmStatusModulationType: the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 15 }
+
+docsDevCmDCCAckFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        ifPhysAddress,
+        docsIfCmCmtsAddress,
+        docsIfDocsisBaseCapability,
+        docsIfCmStatusDocsisOperMode,
+        docsIfCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic channel
+         change acknowledgement during the dynamic channel
+         change process on the CM.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - ifPhysAddress: the MAC address of the cable
+           interface of this cable modem.
+         - docsIfCmCmtsAddress: the MAC address of the CMTS
+           to which the CM is connected (if there is a cable
+           card/interface in the CMTS, then it is actually the
+           MAC address of the cable interface to which it is
+
+           connected).
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+           that the CM is operating in.
+         - docsIfCmtsCmStatusModulationType the upstream modulation
+           methodology used by the CM.
+        "
+    ::= { docsDevCmNotifs 16}
+
+docsDevCmtsInitRegReqFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a registration
+         request from a CM during the CM initialization
+         process that was detected on the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 1 }
+
+docsDevCmtsInitRegRspFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a registration
+         response during the CM initialization
+         process that was detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 2 }
+
+docsDevCmtsInitRegAckFailNotif NOTIFICATION-TYPE
+
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a registration
+         acknowledgement from the CM during the CM
+         initialization process that was detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 3 }
+
+docsDevCmtsDynServReqFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+     }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic service
+         request during the dynamic services process
+         that was detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 4 }
+
+docsDevCmtsDynServRspFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic service
+         response during the dynamic services process
+         that was detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 5 }
+
+docsDevCmtsDynServAckFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic service
+         acknowledgement during the dynamic services
+         process that was detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 6 }
+
+docsDevCmtsBpiInitNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a BPI
+         initialization attempt during the CM registration process
+         that was detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 7 }
+
+docsDevCmtsBPKMNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a BPKM operation
+         that is detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 8 }
+
+docsDevCmtsDynamicSANotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic security
+         association operation that is detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 9 }
+
+docsDevCmtsDCCReqFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic channel
+         change request during the dynamic channel
+         change process and is detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 10 }
+
+docsDevCmtsDCCRspFailNotif NOTIFICATION-TYPE
+
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic channel
+         change response during the dynamic channel
+         change process and is detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 11 }
+
+docsDevCmtsDCCAckFailNotif NOTIFICATION-TYPE
+    OBJECTS {
+        docsDevEvLevel,
+        docsDevEvId,
+        docsDevEvText,
+        docsIfCmtsCmStatusMacAddress,
+        ifPhysAddress,
+        docsIfCmtsCmStatusDocsisRegMode,
+        docsIfDocsisBaseCapability,
+        docsIfCmtsCmStatusModulationType
+    }
+    STATUS current
+    DESCRIPTION
+        "A notification to report the failure of a dynamic channel
+         change acknowledgement during the dynamic channel
+         change process and is detected by the CMTS.
+
+         This notification sends additional information about
+         the event by including the following objects in its
+         varbinding list.
+         - docsDevEvLevel: the priority level associated with the
+           event.
+         - docsDevEvId: the unique identifier of the event that
+           occurred.
+         - docsDevEvText: a textual description of the event.
+         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+           with which this notification is associated.
+         - ifPhysAddress: the MAC address of the CMTS
+           (if there is a cable card/interface in the CMTS,
+           then it is actually the MAC address of the cable
+           interface that connected to the CM) cable interface
+           connected to the CM.
+         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+           that the reporting CM is operating in.
+         - docsIfDocsisBaseCapability: the highest
+           version of the DOCSIS specification (1.0, 1.1, 2.0)
+           that the device is capable of supporting.
+         - docsIfCmtsCmStatusModulationType: the upstream
+           modulation methodology used by the CM.
+        "
+    ::= { docsDevCmtsNotifs 12}
+
+--
+--Conformance definitions
+--
+
+docsDevNotifConformance OBJECT IDENTIFIER
+   ::= { docsDevNotifMIB 4 }
+docsDevNotifGroups OBJECT IDENTIFIER
+   ::= { docsDevNotifConformance 1 }
+docsDevNotifCompliances OBJECT IDENTIFIER
+   ::= { docsDevNotifConformance 2 }
+docsDevCmNotifCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+    "The compliance statement for CM Notifications and Control."
+
+    MODULE --docsDevNotif
+      MANDATORY-GROUPS {
+               docsDevCmNotifControlGroup,
+               docsDevCmNotificationGroup
+           }
+    ::= { docsDevNotifCompliances 1 }
+
+docsDevCmNotifControlGroup OBJECT-GROUP
+    OBJECTS {
+        docsDevCmNotifControl
+    }
+    STATUS current
+    DESCRIPTION
+        "This group represents objects that allow control
+         over CM Notifications."
+    ::= { docsDevNotifGroups 1 }
+
+docsDevCmNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        docsDevCmInitTLVUnknownNotif,
+        docsDevCmDynServReqFailNotif,
+        docsDevCmDynServRspFailNotif,
+        docsDevCmDynServAckFailNotif,
+        docsDevCmBpiInitNotif,
+        docsDevCmBPKMNotif,
+        docsDevCmDynamicSANotif,
+        docsDevCmDHCPFailNotif,
+        docsDevCmSwUpgradeInitNotif,
+        docsDevCmSwUpgradeFailNotif,
+        docsDevCmSwUpgradeSuccessNotif,
+        docsDevCmSwUpgradeCVCFailNotif,
+        docsDevCmTODFailNotif,
+        docsDevCmDCCReqFailNotif,
+        docsDevCmDCCRspFailNotif,
+        docsDevCmDCCAckFailNotif
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of CM notifications providing device status
+   and control."
+    ::= { docsDevNotifGroups 2 }
+
+docsDevCmtsNotifCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The compliance statement for DOCSIS CMTS Notification
+         and Control."
+    MODULE --docsDevNotif
+       MANDATORY-GROUPS {
+          docsDevCmtsNotifControlGroup,
+          docsDevCmtsNotificationGroup
+       }
+    ::= { docsDevNotifCompliances 2 }
+
+docsDevCmtsNotifControlGroup OBJECT-GROUP
+    OBJECTS {
+        docsDevCmtsNotifControl
+    }
+    STATUS current
+    DESCRIPTION
+        "This group represents objects that allow control
+         over CMTS Notifications."
+    ::= { docsDevNotifGroups 3 }
+
+docsDevCmtsNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        docsDevCmtsInitRegReqFailNotif,
+        docsDevCmtsInitRegRspFailNotif,
+        docsDevCmtsInitRegAckFailNotif ,
+        docsDevCmtsDynServReqFailNotif,
+        docsDevCmtsDynServRspFailNotif,
+        docsDevCmtsDynServAckFailNotif,
+        docsDevCmtsBpiInitNotif,
+        docsDevCmtsBPKMNotif,
+        docsDevCmtsDynamicSANotif,
+        docsDevCmtsDCCReqFailNotif,
+        docsDevCmtsDCCRspFailNotif,
+        docsDevCmtsDCCAckFailNotif
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of CMTS notifications providing device
+         status and control."
+    ::= { docsDevNotifGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/DOCS-IETF-QOS-MIB.mib b/snmp_builder/mibs/DOCS-IETF-QOS-MIB.mib
new file mode 100644
index 0000000..8e4ec8d
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-IETF-QOS-MIB.mib
@@ -0,0 +1,3060 @@
+DOCS-IETF-QOS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Integer32,
+    Counter32,
+    Unsigned32,
+    Counter64,
+    mib-2
+      FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION,
+    MacAddress,
+    RowStatus,
+    TruthValue,
+    TimeStamp,
+    StorageType
+      FROM SNMPv2-TC
+
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE
+
+      FROM SNMPv2-CONF
+
+    ifIndex,
+    InterfaceIndex
+      FROM IF-MIB
+
+    InetAddressType,
+    InetAddress,
+    InetPortNumber
+      FROM INET-ADDRESS-MIB
+
+    DscpOrAny
+      FROM DIFFSERV-DSCP-TC
+
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+docsIetfQosMIB   MODULE-IDENTITY
+    LAST-UPDATED    "200601230000Z" -- January 23, 2006
+    ORGANIZATION    "IETF IP over Cable Data Network (IPCDN)
+                     Working Group"
+    CONTACT-INFO
+        "
+         Co-Author: Michael Patrick
+         Postal:    Motorola BCS
+                    111 Locke Drive
+                    Marlborough, MA 01752-7214
+                    U.S.A.
+         Phone:     +1 508 786 7563
+         E-mail:    michael.patrick@motorola.com
+
+         Co-Author: William Murwin
+         Postal:    Motorola BCS
+                    111 Locke Drive
+                    Marlborough, MA 01752-7214
+                    U.S.A.
+         Phone:     +1 508 786 7594
+         E-mail:    w.murwin@motorola.com
+
+         IETF IPCDN Working Group
+         General Discussion: ipcdn@ietf.org
+         Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+         Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+         Co-chairs: Richard Woundy, Richard_Woundy@cable.comcast.com
+                    Jean-Francois Mule, jfm@cablelabs.com"
+    DESCRIPTION
+        "This is the management information for
+         Quality Of Service (QOS) for DOCSIS 1.1 and 2.0.
+
+         Copyright (C) The Internet Society (2006).  This version of
+         this MIB module is part of RFC 4323; see the RFC itself for
+         full legal notices."
+
+    REVISION        "200601230000Z" -- January 23, 2006
+    DESCRIPTION
+        "Initial version, published as RFC 4323."
+    ::= { mib-2 127 }
+
+--
+-- Placeholder for notifications/traps.
+--
+docsIetfQosNotifications OBJECT IDENTIFIER  ::= { docsIetfQosMIB 0 }
+
+docsIetfQosMIBObjects  OBJECT IDENTIFIER ::= { docsIetfQosMIB 1 }
+
+-- Textual Conventions
+DocsIetfQosRfMacIfDirection ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION    "Indicates a direction on an RF MAC interface.
+
+                    The value downstream(1) is from Cable Modem
+                    Termination System to Cable Modem.
+
+                    The value upstream(2) is from Cable Modem to
+                    Cable Modem Termination System."
+    SYNTAX          INTEGER {
+                       downstream(1),
+                       upstream(2)
+                    }
+
+DocsIetfQosBitRate ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "d"
+    STATUS          current
+    DESCRIPTION    "The rate of traffic in unit of bits per second.
+                    Used to specify traffic rate for QOS."
+    SYNTAX          Unsigned32
+
+DocsIetfQosSchedulingType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION    "The scheduling service provided by a CMTS for an
+                    upstream Service Flow.  If the parameter is omitted
+                    from an upstream QOS Parameter Set, this object
+                    takes the value of bestEffort (2).  This parameter
+                    must be reported as undefined (1) for downstream
+                    QOS Parameter Sets."
+    SYNTAX          INTEGER {
+                      undefined (1),
+                      bestEffort (2),
+                      nonRealTimePollingService(3),
+                      realTimePollingService(4),
+                      unsolictedGrantServiceWithAD(5),
+                      unsolictedGrantService(6)
+                    }
+
+-----------------------------------------------------------------------
+--
+-- Packet Classifier Table
+--
+docsIetfQosPktClassTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosPktClassEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes the packet classification
+                    configured on the CM or CMTS.
+                    The model is that a packet either received
+                    as input from an interface or transmitted
+                    for output on an interface may be compared
+                    against an ordered list of rules pertaining to
+                    the packet contents.  Each rule is a row of this
+                    table.  A matching rule provides a Service Flow
+                    ID to which the packet is classified.
+                    All rules need to match for a packet to match
+                    a classifier.
+
+                    The objects in this row correspond to a set of
+                    Classifier Encoding parameters in a DOCSIS
+                    MAC management message.  The
+                    docsIetfQosPktClassBitMap indicates which
+                    particular parameters were present in the
+                    classifier as signaled in the DOCSIS message.
+                    If the referenced parameter was not present
+                    in the signaled DOCSIS 1.1 and 2.0 Classifier, the
+                    corresponding object in this row reports a
+                    value as specified in the DESCRIPTION section."
+    ::= { docsIetfQosMIBObjects 1 }
+
+docsIetfQosPktClassEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosPktClassEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "An entry in this table provides a single packet
+                    classifier rule.  The index ifIndex is an ifType
+                    of docsCableMaclayer(127)."
+    INDEX {
+
+            ifIndex,
+            docsIetfQosServiceFlowId,
+            docsIetfQosPktClassId
+          }
+    ::= { docsIetfQosPktClassTable 1 }
+
+DocsIetfQosPktClassEntry ::= SEQUENCE {
+    docsIetfQosPktClassId                  Unsigned32,
+    docsIetfQosPktClassDirection           DocsIetfQosRfMacIfDirection,
+    docsIetfQosPktClassPriority            Integer32,
+    docsIetfQosPktClassIpTosLow            OCTET STRING,
+    docsIetfQosPktClassIpTosHigh           OCTET STRING,
+    docsIetfQosPktClassIpTosMask           OCTET STRING,
+    docsIetfQosPktClassIpProtocol          Integer32,
+    docsIetfQosPktClassInetAddressType     InetAddressType,
+    docsIetfQosPktClassInetSourceAddr      InetAddress,
+    docsIetfQosPktClassInetSourceMask      InetAddress,
+    docsIetfQosPktClassInetDestAddr        InetAddress,
+    docsIetfQosPktClassInetDestMask        InetAddress,
+    docsIetfQosPktClassSourcePortStart     InetPortNumber,
+    docsIetfQosPktClassSourcePortEnd       InetPortNumber,
+    docsIetfQosPktClassDestPortStart       InetPortNumber,
+    docsIetfQosPktClassDestPortEnd         InetPortNumber,
+    docsIetfQosPktClassDestMacAddr         MacAddress,
+    docsIetfQosPktClassDestMacMask         MacAddress,
+    docsIetfQosPktClassSourceMacAddr       MacAddress,
+    docsIetfQosPktClassEnetProtocolType    INTEGER,
+    docsIetfQosPktClassEnetProtocol        Integer32,
+    docsIetfQosPktClassUserPriLow          Integer32,
+    docsIetfQosPktClassUserPriHigh         Integer32,
+    docsIetfQosPktClassVlanId              Integer32,
+    docsIetfQosPktClassStateActive         TruthValue,
+    docsIetfQosPktClassPkts                Counter64,
+    docsIetfQosPktClassBitMap              BITS
+  }
+
+docsIetfQosPktClassId       OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..65535)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Index assigned to packet classifier entry by
+                    the CMTS, which is unique per Service Flow."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.3.2"
+    ::= { docsIetfQosPktClassEntry 1 }
+
+docsIetfQosPktClassDirection OBJECT-TYPE
+    SYNTAX          DocsIetfQosRfMacIfDirection
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Indicates the direction to which the classifier
+                    is applied."
+    ::= { docsIetfQosPktClassEntry 2 }
+
+docsIetfQosPktClassPriority OBJECT-TYPE
+    SYNTAX          Integer32 (0..255)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value specifies the order of evaluation
+                    of the classifiers.
+
+                    The higher the value, the higher the priority.
+                    The value of 0 is used as default in
+                    provisioned Service Flows Classifiers.
+                    The default value of 64 is used for dynamic
+                    Service Flow Classifiers.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the default
+                    value as defined above."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.3.5"
+    ::= { docsIetfQosPktClassEntry 3 }
+
+docsIetfQosPktClassIpTosLow OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The low value of a range of TOS byte values.
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value
+                    of 0.
+
+                    The IP TOS octet, as originally defined in RFC 791,
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  This object is defined as an 8-bit
+                    octet as per the DOCSIS Specification
+                    for packet classification."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.1"
+    ::= { docsIetfQosPktClassEntry 4 }
+
+docsIetfQosPktClassIpTosHigh OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The 8-bit high value of a range of TOS byte
+                    values.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the
+                    value of 0.
+
+                    The IP TOS octet as originally defined in RFC 791
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  This object is defined as an 8-bit
+                    octet as defined by the DOCSIS Specification
+                    for packet classification."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.1"
+    ::= { docsIetfQosPktClassEntry 5 }
+
+docsIetfQosPktClassIpTosMask OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The mask value is bitwise ANDed with TOS byte
+                    in an IP packet, and this value is used for
+                    range checking of TosLow and TosHigh.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value
+                    of 0.
+
+                    The IP TOS octet as originally defined in RFC 791
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  This object is defined as an 8-bit
+                    octet per the DOCSIS Specification for packet
+                    classification."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.1"
+    ::= { docsIetfQosPktClassEntry 6 }
+
+docsIetfQosPktClassIpProtocol OBJECT-TYPE
+    SYNTAX          Integer32 (0..258)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object indicates the value of the IP
+                    Protocol field required for IP packets to match
+                    this rule.
+
+                    The value 256 matches traffic with any IP Protocol
+                    value.  The value 257 by convention matches both TCP
+                    and UDP.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value
+                    of 258."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.2"
+    ::= { docsIetfQosPktClassEntry 7 }
+
+docsIetfQosPktClassInetAddressType OBJECT-TYPE
+    SYNTAX          InetAddressType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The type of the Internet address for
+                    docsIetfQosPktClassInetSourceAddr,
+                    docsIetfQosPktClassInetSourceMask,
+                    docsIetfQosPktClassInetDestAddr, and
+                    docsIetfQosPktClassInetDestMask.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    ipv4(1)."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.3"
+    ::= { docsIetfQosPktClassEntry 8 }
+
+docsIetfQosPktClassInetSourceAddr OBJECT-TYPE
+    SYNTAX          InetAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies the value of the IP
+                    Source Address required for packets to match
+                    this rule.
+
+                    An IP packet matches the rule when the packet
+                    IP Source Address bitwise ANDed with the
+                    docsIetfQosPktClassInetSourceMask value equals the
+                    docsIetfQosPktClassInetSourceAddr value.
+
+                    The address type of this object is specified by
+                    docsIetfQosPktClassInetAddressType.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    '00000000'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.3"
+    ::= { docsIetfQosPktClassEntry 9 }
+
+docsIetfQosPktClassInetSourceMask OBJECT-TYPE
+    SYNTAX          InetAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies which bits of a packet's
+                    IP Source Address are compared to match
+                    this rule.
+
+                    An IP packet matches the rule when the packet
+                    source address bitwise ANDed with the
+                    docsIetfQosPktClassInetSourceMask value equals the
+                    docsIetfQosIpPktClassInetSourceAddr value.
+
+                    The address type of this object is specified by
+                    docsIetfQosPktClassInetAddressType.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    'FFFFFFFF'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.4"
+    ::= { docsIetfQosPktClassEntry 10 }
+
+docsIetfQosPktClassInetDestAddr OBJECT-TYPE
+    SYNTAX          InetAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies the value of the IP
+                    Destination Address required for packets to match
+                    this rule.
+
+                    An IP packet matches the rule when the packet
+                    IP Destination Address bitwise ANDed with the
+                    docsIetfQosPktClassInetDestMask value
+                    equals the docsIetfQosPktClassInetDestAddr value.
+
+                    The address type of this object is specified by
+                    docsIetfQosPktClassInetAddressType.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    '00000000'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.5"
+    ::= { docsIetfQosPktClassEntry 11 }
+
+docsIetfQosPktClassInetDestMask OBJECT-TYPE
+    SYNTAX          InetAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies which bits of a packet's
+                    IP Destination Address are compared to
+                    match this rule.
+
+                    An IP packet matches the rule when the packet
+                    destination address bitwise ANDed with the
+                    docsIetfQosPktClassInetDestMask value equals the
+                    docsIetfQosIpPktClassInetDestAddr value.
+
+                    The address type of this object is specified by
+                    docsIetfQosPktClassInetAddressType.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    'FFFFFFFF'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.6"
+    ::= { docsIetfQosPktClassEntry 12 }
+
+docsIetfQosPktClassSourcePortStart OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies the low-end inclusive
+                    range of TCP/UDP source port numbers to which
+                    a packet is compared.  This object is irrelevant
+                    for non-TCP/UDP IP packets.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value
+                    of 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.7"
+    ::= { docsIetfQosPktClassEntry 13 }
+
+docsIetfQosPktClassSourcePortEnd OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies the high-end inclusive
+                    range of TCP/UDP source port numbers to which
+                    a packet is compared.  This object is irrelevant
+                    for non-TCP/UDP IP packets.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    65535."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.8"
+    ::= { docsIetfQosPktClassEntry 14 }
+
+docsIetfQosPktClassDestPortStart OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "This object specifies the low-end inclusive
+                     range of TCP/UDP destination port numbers to
+                     which a packet is compared.
+
+                     If the referenced parameter is not present
+                     in a classifier, this object reports the value
+                     of 0."
+    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.9"
+    ::= { docsIetfQosPktClassEntry 15 }
+
+docsIetfQosPktClassDestPortEnd OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object specifies the high-end inclusive
+                    range of TCP/UDP destination port numbers to which
+                    a packet is compared.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    65535."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.5.10"
+    ::= { docsIetfQosPktClassEntry 16 }
+
+docsIetfQosPktClassDestMacAddr OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "An Ethernet packet matches an entry when its
+                    destination MAC address bitwise ANDed with
+                    docsIetfQosPktClassDestMacMask equals the value of
+                    docsIetfQosPktClassDestMacAddr.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    '000000000000'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.6.1"
+    ::= { docsIetfQosPktClassEntry 17 }
+
+docsIetfQosPktClassDestMacMask OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "An Ethernet packet matches an entry when its
+                    destination MAC address bitwise ANDed with
+                    docsIetfQosPktClassDestMacMask equals the value of
+                    docsIetfQosPktClassDestMacAddr.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    '000000000000'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.6.1"
+    ::= { docsIetfQosPktClassEntry 18 }
+
+docsIetfQosPktClassSourceMacAddr OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "An Ethernet packet matches this entry when its
+                    source MAC address equals the value of
+                    this object.
+
+                    If the referenced parameter is not present
+                    in a classifier, this object reports the value of
+                    'FFFFFFFFFFFF'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.6.2"
+    ::= { docsIetfQosPktClassEntry 19 }
+
+docsIetfQosPktClassEnetProtocolType OBJECT-TYPE
+    SYNTAX          INTEGER {
+                      none(0),
+                      ethertype(1),
+                      dsap(2),
+                      mac(3),
+                      all(4)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object indicates the format of the layer 3
+                    protocol ID in the Ethernet packet.  A value of
+                    none(0) means that the rule does not use the
+                    layer 3 protocol type as a matching criteria.
+
+                    A value of ethertype(1) means that the rule
+                    applies only to frames that contain an
+                    EtherType value.  Ethertype values are contained
+                    in packets using the Dec-Intel-Xerox (DIX)
+                    encapsulation or the RFC1042 Sub-Network Access
+                    Protocol (SNAP) encapsulation formats.
+
+                    A value of dsap(2) means that the rule applies
+
+                    only to frames using the IEEE802.3
+                    encapsulation format with a Destination Service
+                    Access Point (DSAP) other
+                    than 0xAA (which is reserved for SNAP).
+
+                    A value of mac(3) means that the rule applies
+                    only to MAC management messages for MAC management
+                    messages.
+
+                    A value of all(4) means that the rule matches
+                    all Ethernet packets.
+
+                    If the Ethernet frame contains an 802.1P/Q Tag
+                    header (i.e., EtherType 0x8100), this object
+                    applies to the embedded EtherType field within
+                    the 802.1P/Q header.
+
+                    If the referenced parameter is not present in a
+                    classifier, this object reports the value of 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.6.3"
+    ::= { docsIetfQosPktClassEntry 20 }
+
+docsIetfQosPktClassEnetProtocol OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "If docsIetfQosEthPktClassProtocolType is none(0),
+                    this object is ignored when considering whether
+                    a packet matches the current rule.
+
+                    If dosQosPktClassEnetProtocolType is ethertype(1),
+                    this object gives the 16-bit value of the
+                    EtherType that the packet must match in order to
+                    match the rule.
+
+                    If docsIetfQosPktClassEnetProtocolType is dsap(2),
+                    the lower 8 bits of this object's value must match
+                    the DSAP byte of the packet in order to match the
+                    rule.
+
+                    If docsIetfQosPktClassEnetProtocolType is mac(3),
+                    the lower 8 bits of this object's value represent a
+                    lower bound (inclusive) of MAC management message
+                    type codes matched, and the upper 8 bits represent
+                    the upper bound (inclusive) of matched MAC message
+                    type codes.  Certain message type codes are
+                    excluded from matching, as specified in the
+                    reference.
+
+                    If the Ethernet frame contains an 802.1P/Q Tag
+                    header (i.e., EtherType 0x8100), this object applies
+                    to the embedded EtherType field within the 802.1P/Q
+                    header.
+
+                    If the referenced parameter is not present in the
+                    classifier, the value of this object is reported
+                    as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.6.3"
+    ::= { docsIetfQosPktClassEntry 21 }
+
+docsIetfQosPktClassUserPriLow OBJECT-TYPE
+    SYNTAX          Integer32 (0..7)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object applies only to Ethernet frames
+                    using the 802.1P/Q tag header (indicated with
+                    EtherType 0x8100).  Such frames include a 16-bit
+                    Tag that contains a 3-bit Priority field and
+                    a 12-bit VLAN number.
+
+                    Tagged Ethernet packets must have a 3-bit
+                    Priority field within the range of
+                    docsIetfQosPktClassPriLow to
+                    docsIetfQosPktClassPriHigh in order to match this
+                    rule.
+
+                    If the referenced parameter is not present in the
+                    classifier, the value of this object is reported
+                    as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.1"
+    ::= { docsIetfQosPktClassEntry 22 }
+
+docsIetfQosPktClassUserPriHigh OBJECT-TYPE
+    SYNTAX          Integer32 (0..7)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object applies only to Ethernet frames
+                    using the 802.1P/Qtag header (indicated with
+                    EtherType 0x8100).  Such frames include a 16-bit
+                    Tag that contains a 3-bit Priority field and
+                    a 12-bit VLAN number.
+
+                    Tagged Ethernet packets must have a 3-bit
+                    Priority field within the range of
+                    docsIetfQosPktClassPriLow to
+                    docsIetfQosPktClassPriHigh in order to match this
+                    rule.
+
+                    If the referenced parameter is not present in the
+                    classifier, the value of this object is reported
+                    as 7."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.1"
+    ::= { docsIetfQosPktClassEntry 23 }
+
+docsIetfQosPktClassVlanId OBJECT-TYPE
+    SYNTAX          Integer32 (0 | 1..4094)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object applies only to Ethernet frames
+                    using the 802.1P/Q tag header.
+
+                    Tagged packets must have a VLAN Identifier that
+                    matches the value in order to match the rule.
+
+                    If the referenced parameter is not present in the
+                    classifier, the value of this object is reported
+                    as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.2"
+    ::= { docsIetfQosPktClassEntry 24 }
+
+docsIetfQosPktClassStateActive OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object indicates whether or not the classifier
+                    is enabled to classify packets to a Service Flow.
+
+                    If the referenced parameter is not present in the
+                    classifier, the value of this object is reported
+                    as true(1)."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.3.6"
+    ::= { docsIetfQosPktClassEntry 25 }
+
+docsIetfQosPktClassPkts OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object counts the number of packets that have
+                    been classified using this entry.  This
+                    includes all packets delivered to a Service Flow
+                    maximum rate policing function, whether or not that
+                    function drops the packets.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosPktClassEntry 26 }
+
+docsIetfQosPktClassBitMap OBJECT-TYPE
+    SYNTAX          BITS {          -- Reference SP-RFIv2.0-I06-040804
+                        rulePriority(0),     -- Appendix C.2.1.3.4
+                        activationState(1),  -- Appendix C.2.1.3.6
+                        ipTos(2),            -- Appendix C.2.1.5.1
+                        ipProtocol(3),       -- Appendix C.2.1.5.2
+                        ipSourceAddr(4),     -- Appendix C.2.1.5.3
+                        ipSourceMask(5),     -- Appendix C.2.1.5.4
+                        ipDestAddr(6),       -- Appendix C.2.1.5.5
+                        ipDestMask(7),       -- Appendix C.2.1.5.6
+                        sourcePortStart(8),  -- Appendix C.2.1.5.7
+                        sourcePortEnd(9),    -- Appendix C.2.1.5.8
+                        destPortStart(10),   -- Appendix C.2.1.5.9
+                        destPortEnd(11),     -- Appendix C.2.1.5.10
+                        destMac(12),         -- Appendix C.2.1.6.1
+                        sourceMac(13),       -- Appendix C.2.1.6.2
+                        ethertype(14),       -- Appendix C.2.1.6.3
+                        userPri(15),         -- Appendix C.2.1.7.1
+                        vlanId(16)           -- Appendix C.2.1.7.2
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+                    "This object indicates which parameter encodings
+                    were actually present in the DOCSIS packet
+                    classifier encoding signaled in the DOCSIS message
+                    that created or modified the classifier.  Note that
+                    Dynamic Service Change messages have replace
+                    semantics, so that all non-default parameters must
+                    be present whether the classifier is being created
+                    or changed.
+
+                    A bit of this object is set to 1 if the parameter
+                    indicated by the comment was present in the
+                    classifier encoding, and to 0 otherwise.
+
+                    Note that BITS are encoded most significant bit
+                    first, so that if, for example, bits 6 and 7 are
+                    set, this object is encoded as the octet string
+                    '030000'H."
+    ::= { docsIetfQosPktClassEntry 27 }
+
+--
+-- QOS Parameter Set Table
+--
+
+docsIetfQosParamSetTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosParamSetEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes the set of DOCSIS 1.1 and 2.0
+                    QOS parameters defined in a managed device.
+
+                    The ifIndex index specifies a DOCSIS MAC Domain.
+                    The docsIetfQosServiceFlowId index specifies a
+                    particular Service Flow.
+                    The docsIetfQosParamSetType index indicates whether
+                    the active, admitted, or provisioned QOS Parameter
+                    Set is being described by the row.
+
+                    Only the QOS Parameter Sets of DOCSIS 1.1 and 2.0
+                    Service Flows are represented in this table.
+
+                    DOCSIS 1.0 QOS service profiles are not
+                    represented in this table.
+
+                    Each row corresponds to a DOCSIS QOS Parameter Set
+                    as signaled via DOCSIS MAC management messages.
+                    Each object in the row corresponds to one or
+                    part of one DOCSIS 1.1 Service Flow Encoding.
+                    The docsIetfQosParamSetBitMap object in the row
+                    indicates which particular parameters were signaled
+                    in the original registration or dynamic service
+                    request message that created the QOS Parameter Set.
+
+                    In many cases, even if a QOS Parameter Set parameter
+                    was not signaled, the DOCSIS specification calls
+                    for a default value to be used.  That default value
+                    is reported as the value of the corresponding object
+                    in this row.
+
+                    Many objects are not applicable, depending on
+                    the Service Flow direction or upstream scheduling
+                    type.  The object value reported in this case
+                    is specified in the DESCRIPTION clause."
+    ::= { docsIetfQosMIBObjects 2 }
+
+docsIetfQosParamSetEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosParamSetEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "A unique set of QOS parameters."
+    INDEX {
+        ifIndex, docsIetfQosServiceFlowId, docsIetfQosParamSetType
+
+          }
+    ::= { docsIetfQosParamSetTable 1 }
+
+DocsIetfQosParamSetEntry ::= SEQUENCE {
+    docsIetfQosParamSetServiceClassName   SnmpAdminString,
+    docsIetfQosParamSetPriority           Integer32,
+    docsIetfQosParamSetMaxTrafficRate     DocsIetfQosBitRate,
+    docsIetfQosParamSetMaxTrafficBurst    Unsigned32,
+    docsIetfQosParamSetMinReservedRate    DocsIetfQosBitRate,
+    docsIetfQosParamSetMinReservedPkt     Integer32,
+    docsIetfQosParamSetActiveTimeout      Integer32,
+    docsIetfQosParamSetAdmittedTimeout    Integer32,
+    docsIetfQosParamSetMaxConcatBurst     Integer32,
+    docsIetfQosParamSetSchedulingType     DocsIetfQosSchedulingType,
+    docsIetfQosParamSetNomPollInterval    Unsigned32,
+    docsIetfQosParamSetTolPollJitter      Unsigned32,
+    docsIetfQosParamSetUnsolicitGrantSize Integer32,
+    docsIetfQosParamSetNomGrantInterval   Unsigned32,
+    docsIetfQosParamSetTolGrantJitter     Unsigned32,
+    docsIetfQosParamSetGrantsPerInterval  Integer32,
+    docsIetfQosParamSetTosAndMask         OCTET STRING,
+    docsIetfQosParamSetTosOrMask          OCTET STRING,
+    docsIetfQosParamSetMaxLatency         Unsigned32,
+    docsIetfQosParamSetType               INTEGER,
+    docsIetfQosParamSetRequestPolicyOct   OCTET STRING,
+    docsIetfQosParamSetBitMap             BITS
+    }
+
+docsIetfQosParamSetServiceClassName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Refers to the Service Class Name from which the
+                    parameter set values were derived.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object is a zero-length string."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.3.4"
+    ::= { docsIetfQosParamSetEntry 1 }
+
+docsIetfQosParamSetPriority OBJECT-TYPE
+    SYNTAX          Integer32 (0..7)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The relative priority of a Service Flow.
+                    Higher numbers indicate higher priority.
+                    This priority should only be used to differentiate
+
+                    Service Flow from identical parameter sets.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object is 0.  If the parameter is
+                    not applicable, the reported value is 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.1"
+    ::= { docsIetfQosParamSetEntry 2 }
+
+docsIetfQosParamSetMaxTrafficRate OBJECT-TYPE
+    SYNTAX          DocsIetfQosBitRate
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Maximum sustained traffic rate allowed for this
+                    Service Flow in bits/sec.  Must count all MAC frame
+                    data PDU from the bytes following the MAC header
+                    HCS to the end of the CRC.  The number of bytes
+                    forwarded is limited during any time interval.
+                    The value 0 means no maximum traffic rate is
+                    enforced.  This object applies to both upstream and
+                    downstream Service Flows.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object is 0.  If the parameter is
+                    not applicable, it is reported as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.2"
+    ::= { docsIetfQosParamSetEntry 3 }
+
+docsIetfQosParamSetMaxTrafficBurst OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the token bucket size in bytes
+                    for this parameter set.  The value is calculated
+                    from the byte following the MAC header HCS to
+                    the end of the CRC.  This object is applied in
+                    conjunction with docsIetfQosParamSetMaxTrafficRate
+                    to calculate maximum sustained traffic rate.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object for scheduling types
+                    bestEffort (2), nonRealTimePollingService(3),
+                    and realTimePollingService(4) is 3044.
+
+                    If this parameter is not applicable, it is reported
+                    as 0.
+                   "
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.3"
+    ::= { docsIetfQosParamSetEntry 4 }
+
+docsIetfQosParamSetMinReservedRate OBJECT-TYPE
+    SYNTAX          DocsIetfQosBitRate
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the guaranteed minimum rate in
+                    bits/sec for this parameter set.  The value is
+                    calculated from the byte following the MAC
+                    header HCS to the end of the CRC.  The default
+                    value of 0 means that no bandwidth is reserved.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object is 0.  If the parameter
+                    is not applicable, it is reported as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.4"
+    ::= { docsIetfQosParamSetEntry 5 }
+
+docsIetfQosParamSetMinReservedPkt OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies an assumed minimum packet size in
+                    bytes for which the
+                    docsIetfQosParamSetMinReservedRate will be
+                    provided.  The value is calculated from the byte
+                    following the MAC header HCS to the end of the
+                    CRC.
+
+                    If the referenced parameter is omitted from a
+                    DOCSIS QOS parameter set, the default value is
+                    CMTS implementation dependent.  In this case, the
+                    CMTS reports the default value it is using, and the
+                    CM reports a value of 0.  If the referenced
+                    parameter is not applicable to the direction or
+                    scheduling type of the Service Flow, both CMTS and
+                    CM report this object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.5"
+    ::= { docsIetfQosParamSetEntry 6 }
+
+docsIetfQosParamSetActiveTimeout OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    UNITS           "seconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the maximum duration in seconds that
+                    resources remain unused on an active service
+                    flow before CMTS signals that both active and
+                    admitted parameters set are null.  The default
+                    value of 0 signifies an infinite amount of time.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object is 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.6"
+    ::= { docsIetfQosParamSetEntry 7 }
+
+docsIetfQosParamSetAdmittedTimeout OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    UNITS           "seconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the maximum duration in seconds that
+                    resources remain in admitted state before
+                    resources must be released.
+
+                    The value of 0 signifies an infinite amount
+                    of time.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the
+                    default value of this object is 200.
+                   "
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.5.7"
+    DEFVAL          { 200 }
+    ::= { docsIetfQosParamSetEntry 8 }
+
+docsIetfQosParamSetMaxConcatBurst OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the maximum concatenated burst in
+                    bytes that an upstream Service Flow is allowed.
+                    The value is calculated from the FC byte of the
+                    Concatenation MAC Header to the last CRC byte in
+                    of the last concatenated MAC frame, inclusive.
+                    The value of 0 specifies no maximum burst.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set, the default
+                    value of this object for scheduling types
+                    bestEffort(2), nonRealTimePollingService(3), and
+
+                    realTimePollingService(4) is 1522.  If the parameter
+                    is not applicable, this object's value is reported
+                    as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.1"
+    ::= { docsIetfQosParamSetEntry 9 }
+
+docsIetfQosParamSetSchedulingType OBJECT-TYPE
+    SYNTAX          DocsIetfQosSchedulingType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the upstream scheduling service used for
+                    upstream Service Flow.
+
+                    If the referenced parameter is not present in the
+                    corresponding DOCSIS QOS Parameter Set of an
+                    upstream Service Flow, the default value of this
+                    object is bestEffort(2).  For QOS parameter sets of
+                    downstream Service Flows, this object's value is
+                    reported as undefined(1)."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.2"
+    ::= { docsIetfQosParamSetEntry 10 }
+
+docsIetfQosParamSetNomPollInterval OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the nominal interval in microseconds
+                    between successive unicast request
+                    opportunities on an upstream Service Flow.
+
+                    This object applies only to upstream Service Flows
+                    with DocsIetfQosSchedulingType of value
+                    nonRealTimePollingService(3),
+                    realTimePollingService(4), and
+                    unsolictedGrantServiceWithAD(5).  The parameter is
+                    mandatory for realTimePollingService(4).  If the
+                    parameter is omitted with
+                    nonRealTimePollingService(3), the CMTS uses an
+                    implementation-dependent value.  If the parameter
+                    is omitted with unsolictedGrantServiceWithAD(5),
+                    the CMTS uses as a default value the value of the
+                    Nominal Grant Interval parameter.  In all cases,
+                    the CMTS reports the value it is using when the
+                    parameter is applicable.  The CM reports the
+                    signaled parameter value if it was signaled,
+                    and 0 otherwise.
+
+                    If the referenced parameter is not applicable to
+                    the direction or scheduling type of the
+                    corresponding DOCSIS QOS Parameter Set, both
+                    CMTS and CM report this object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.4"
+    ::= { docsIetfQosParamSetEntry 11 }
+
+docsIetfQosParamSetTolPollJitter OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the maximum amount of time in
+                    microseconds that the unicast request interval
+                    may be delayed from the nominal periodic
+                    schedule on an upstream Service Flow.
+
+                    This parameter is applicable only to upstream
+                    Service Flows with a DocsIetfQosSchedulingType of
+                    realTimePollingService(4) or
+                    unsolictedGrantServiceWithAD(5).
+
+                    If the referenced parameter is applicable but not
+                    present in the corresponding DOCSIS QOS Parameter
+                    Set, the CMTS uses an implementation-dependent
+                    value and reports the value it is using.
+                    The CM reports a value of 0 in this case.
+
+                    If the parameter is not applicable to the
+                    direction or upstream scheduling type of the
+                    Service Flow, both CMTS and CM report this
+                    object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.5"
+    ::= { docsIetfQosParamSetEntry 12 }
+
+docsIetfQosParamSetUnsolicitGrantSize OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the unsolicited grant size in bytes.
+                    The grant size includes the entire MAC frame
+                    data PDU from the Frame Control byte to the end
+                    of the MAC frame.
+
+                    The referenced parameter is applicable only
+                    for upstream flows with a DocsIetfQosSchedulingType
+                    of unsolicitedGrantServicewithAD(5) or
+                    unsolicitedGrantService(6), and it is mandatory
+
+                    when applicable.  Both CMTS and CM report
+                    the signaled value of the parameter in this
+                    case.
+
+                    If the referenced parameter is not applicable to
+                    the direction or scheduling type of the
+                    corresponding DOCSIS QOS Parameter Set, both
+                    CMTS and CM report this object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.6"
+    ::= { docsIetfQosParamSetEntry 13 }
+
+docsIetfQosParamSetNomGrantInterval OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the nominal interval in microseconds
+                    between successive data grant opportunities
+                    on an upstream Service Flow.
+
+                    The referenced parameter is applicable only
+                    for upstream flows with a DocsIetfQosSchedulingType
+                    of unsolicitedGrantServicewithAD(5) or
+                    unsolicitedGrantService(6), and it is mandatory
+                    when applicable.  Both CMTS and CM report the
+                    signaled value of the parameter in this case.
+
+                    If the referenced parameter is not applicable to
+                    the direction or scheduling type of the
+                    corresponding DOCSIS QOS Parameter Set, both
+                    CMTS and CM report this object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.7"
+    ::= { docsIetfQosParamSetEntry 14 }
+
+docsIetfQosParamSetTolGrantJitter OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the maximum amount of time in
+                    microseconds that the transmission opportunities
+                    may be delayed from the nominal periodic schedule.
+
+                    The referenced parameter is applicable only
+                    for upstream flows with a DocsIetfQosSchedulingType
+                    of unsolicitedGrantServicewithAD(5) or
+                    unsolicitedGrantService(6), and it is mandatory
+                    when applicable.  Both CMTS and CM report the
+
+                    signaled value of the parameter in this case.
+
+                    If the referenced parameter is not applicable to
+                    the direction or scheduling type of the
+                    corresponding DOCSIS QOS Parameter Set, both
+                    CMTS and CM report this object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.8"
+    ::= { docsIetfQosParamSetEntry 15 }
+
+docsIetfQosParamSetGrantsPerInterval OBJECT-TYPE
+    SYNTAX          Integer32 (0..127)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the number of data grants per Nominal
+                    Grant Interval
+                    (docsIetfQosParamSetNomGrantInterval).
+
+                    The referenced parameter is applicable only
+                    for upstream flows with a DocsIetfQosSchedulingType
+                    of unsolicitedGrantServicewithAD(5) or
+                    unsolicitedGrantService(6), and it is mandatory
+                    when applicable.  Both CMTS and CM report the
+                    signaled value of the parameter in this case.
+
+                    If the referenced parameter is not applicable to
+                    the direction or scheduling type of the
+                    corresponding DOCSIS QOS Parameter Set, both
+                    CMTS and CM report this object's value as 0."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.9"
+    ::= { docsIetfQosParamSetEntry 16 }
+
+docsIetfQosParamSetTosAndMask OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the AND mask for the IP TOS byte for
+                    overwriting IP packet's TOS value.  The IP packet
+                    TOS byte is bitwise ANDed with
+                    docsIetfQosParamSetTosAndMask, and the result is
+                    bitwise ORed with docsIetfQosParamSetTosORMask and
+                    the result is written to the IP packet TOS byte.
+                    A value of 'FF'H for docsIetfQosParamSetTosAndMask
+                    and a value of '00'H for
+                    docsIetfQosParamSetTosOrMask means that the IP
+                    Packet TOS byte is not overwritten.
+
+                    This combination is reported if the referenced
+                    parameter is not present in a QOS Parameter Set.
+
+                    The IP TOS octet as originally defined in RFC 791
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  Network operators SHOULD avoid
+                    specifying values of docsIetfQosParamSetTosAndMask
+                    and docsIetfQosParamSetTosORMask that would result
+                    in the modification of the ECN bits.
+
+                    In particular, operators should not use values of
+                    docsIetfQosParamSetTosAndMask that have either of
+                    the least-significant two bits set to 0.  Similarly,
+                    operators should not use values of
+                    docsIetfQosParamSetTosORMask that have either of
+                    the least-significant two bits set to 1.
+
+                    Even though this object is only enforced by the
+                    Cable Modem Termination System (CMTS),
+                    Cable Modems MUST report the value as signaled in
+                    the referenced parameter."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.10;
+                    RFC 3168, The Addition of Explicit Congestion
+                    Notification (ECN) to IP;
+                    RFC 3260, New Terminology and Clarifications for
+                    Diffserv."
+    ::= { docsIetfQosParamSetEntry 17 }
+
+docsIetfQosParamSetTosOrMask OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the OR mask for the IP TOS byte.
+
+                    See the description of docsIetfQosParamSetTosAndMask
+                    for further details.
+
+                    The IP TOS octet as originally defined in RFC 791
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  Network operators SHOULD avoid
+                    specifying values of docsIetfQosParamSetTosAndMask
+                    and docsIetfQosParamSetTosORMask that would result
+                    in the modification of the ECN bits."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.10;
+                    RFC 3168, The Addition of Explicit Congestion
+                    Notification (ECN) to IP;
+                    RFC 3260, New Terminology and Clarifications for
+
+                    Diffserv."
+    ::= { docsIetfQosParamSetEntry 18 }
+
+docsIetfQosParamSetMaxLatency OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies the maximum latency between the
+                    reception of a packet by the CMTS on its NSI
+                    and the forwarding of the packet to the RF
+                    interface.  A value of 0 signifies no maximum
+                    latency is enforced.  This object only applies to
+                    downstream Service Flows.
+
+                    If the referenced parameter is not present in the
+                    corresponding downstream DOCSIS QOS Parameter Set,
+                    the default value is 0.  This parameter is
+                    not applicable to upstream DOCSIS QOS Parameter
+                    Sets, and its value is reported as 0 in this case."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.7.1"
+    ::= { docsIetfQosParamSetEntry 19 }
+
+docsIetfQosParamSetType     OBJECT-TYPE
+    SYNTAX          INTEGER {
+                       active (1),
+                       admitted (2),
+                       provisioned (3)
+                    }
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Defines the type of the QOS parameter set defined
+                    by this row.  active(1) indicates the Active QOS
+                    parameter set, describing the service currently
+                    being provided by the DOCSIS MAC domain to the
+                    Service Flow.  admitted(2) indicates the Admitted
+                    QOS Parameter Set, describing services reserved by
+                    the DOCSIS MAC domain for use by the service
+                    flow.  provisioned (3) describes the QOS Parameter
+                    Set defined in the DOCSIS CM Configuration file for
+                    the Service Flow."
+    REFERENCE      "SP-RFIv2.0-I06-040804, 8.1.5"
+    ::= { docsIetfQosParamSetEntry 20 }
+
+docsIetfQosParamSetRequestPolicyOct OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(4))
+                    -- A 32-bit mask represented most significant byte
+
+                    -- first.  The 32-bit integer represented in this
+                    -- manner equals the binary value of the referenced
+                    -- integer parameter of the DOCSIS RFI
+                    -- specification.
+                    -- The BITS syntax is not used in order to avoid
+                    -- the confusion caused by different bit-numbering
+                    -- conventions.
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Specifies which transmit interval opportunities
+                    the CM omits for upstream transmission requests and
+                    packet transmissions.  This object takes its
+                    default value for downstream Service Flows.
+
+                    Unless otherwise indicated, a bit value of 1 means
+                    that a CM must not use that opportunity for
+                    upstream transmission.
+
+                    If bit 0 is the least significant bit of the
+                    least significant (4th) octet, and if bit number
+                    is increased with significance, the bit definitions
+                    are defined as follows:
+
+                    broadcastReqOpp(0):
+                         all CMs broadcast request opportunities
+
+                    priorityReqMulticastReq(1):
+                         priority request multicast request
+                         opportunities
+
+                    reqDataForReq(2):
+                         request/data opportunities for requests
+
+                    reqDataForData(3):
+                         request/data opportunities for data
+
+                    piggybackReqWithData(4):
+                         piggyback requests with data
+
+                    concatenateData(5):
+                         concatenate data
+
+                    fragmentData(6):
+                         fragment data
+
+                    suppresspayloadheaders(7):
+                         suppress payload headers
+
+                    dropPktsExceedUGSize(8):
+                         A value of 1 means that the Service Flow must
+                         drop packets that do not fit in the Unsolicited
+                         Grant size.
+
+                    If the referenced parameter is not present in
+                    a QOS Parameter Set, the value of this object is
+                    reported as '00000000'H."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.3"
+    ::= { docsIetfQosParamSetEntry 21 }
+
+docsIetfQosParamSetBitMap OBJECT-TYPE
+                                -- Each bit corresponds to a parameter
+                                -- from SP-RFI-v1.1-I10-037030,
+                                -- Appendix C in the indicated
+    SYNTAX          BITS {      -- section number.
+                        trafficPriority(0),     -- C.2.2.5.1
+                        maxTrafficRate(1),      -- C.2.2.5.2
+                        maxTrafficBurst(2),     -- C.2.2.5.3
+                        minReservedRate(3),     -- C.2.2.5.4
+                        minReservedPkt(4),      -- C.2.2.5.5
+                        activeTimeout(5),       -- C.2.2.5.6
+                        admittedTimeout(6),     -- C.2.2.5.7
+                        maxConcatBurst(7),      -- C.2.2.6.1
+                        schedulingType(8),      -- C.2.2.6.2
+                        requestPolicy(9),       -- C.2.2.6.3
+                        nomPollInterval(10),    -- C.2.2.6.4
+                        tolPollJitter(11),      -- C.2.2.6.5
+                        unsolicitGrantSize(12), -- C.2.2.6.6
+                        nomGrantInterval(13),   -- C.2.2.6.7
+                        tolGrantJitter(14),     -- C.2.2.6.8
+                        grantsPerInterval(15),  -- C.2.2.6.9
+                        tosOverwrite(16),       -- C.2.2.6.10
+                        maxLatency(17)          -- C.2.2.7.1
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object indicates the set of QOS Parameter
+                    Set parameters actually signaled in the
+                    DOCSIS registration or dynamic service request
+                    message that created or modified the QOS Parameter
+                    Set.  A bit is set to 1 when the parameter described
+                    by the indicated reference section is present
+                    in the original request.
+
+                    Note that when Service Class names are expanded,
+                    the registration or dynamic response message may
+                    contain parameters as expanded by the CMTS based
+
+                    on a stored service class.  These expanded
+                    parameters are not indicated by a 1 bit in this
+                    object.
+
+                    Note that even though some QOS Parameter Set
+                    parameters may not be signaled in a message
+                    (so that the paramater's bit in this object is 0),
+                    the DOCSIS specification requires that default
+                    values be used.  These default values are reported
+                    as the corresponding object's value in the row.
+
+                    Note that BITS objects are encoded most
+                    significant bit first.  For example, if bits
+                    1 and 16 are set, the value of this object
+                    is the octet string '400080'H."
+    ::= { docsIetfQosParamSetEntry 22 }
+
+--
+--  Service Flow Table
+--
+docsIetfQosServiceFlowTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosServiceFlowEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes the set of DOCSIS-QOS
+                    Service Flows in a managed device."
+    ::= { docsIetfQosMIBObjects 3 }
+
+docsIetfQosServiceFlowEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosServiceFlowEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Describes a Service Flow.
+                    An entry in the table exists for each
+                    Service Flow ID.  The ifIndex is an
+                    ifType of docsCableMaclayer(127)."
+    INDEX {
+            ifIndex,
+            docsIetfQosServiceFlowId
+          }
+    ::= { docsIetfQosServiceFlowTable 1 }
+
+DocsIetfQosServiceFlowEntry ::= SEQUENCE {
+    docsIetfQosServiceFlowId               Unsigned32,
+    docsIetfQosServiceFlowSID              Unsigned32,
+    docsIetfQosServiceFlowDirection        DocsIetfQosRfMacIfDirection,
+    docsIetfQosServiceFlowPrimary          TruthValue
+    }
+
+docsIetfQosServiceFlowId    OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "An index assigned to a Service Flow by CMTS."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.3.2"
+    ::= { docsIetfQosServiceFlowEntry 1 }
+
+docsIetfQosServiceFlowSID  OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..16383)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Service Identifier (SID) assigned to an
+                    admitted or active Service Flow.  This object
+                    reports a value of 0 if a Service ID is not
+                    associated with the Service Flow.  Only active
+                    or admitted upstream Service Flows will have a
+                    Service ID (SID)."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.3.3"
+    ::= { docsIetfQosServiceFlowEntry 2 }
+
+docsIetfQosServiceFlowDirection OBJECT-TYPE
+    SYNTAX          DocsIetfQosRfMacIfDirection
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The direction of the Service Flow."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.1/2"
+    ::= { docsIetfQosServiceFlowEntry 3 }
+
+docsIetfQosServiceFlowPrimary OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Object reflects whether Service Flow is the primary
+                    or a secondary Service Flow.
+
+                    A primary Service Flow is the default Service Flow
+                    for otherwise unclassified traffic and all MAC
+                    messages."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Section 8.1 "
+    ::= { docsIetfQosServiceFlowEntry 4 }
+
+--
+--  Service Flow Stats Table
+--
+docsIetfQosServiceFlowStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosServiceFlowStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION     "This table describes statistics associated with the
+                     Service Flows in a managed device."
+    ::= { docsIetfQosMIBObjects 4 }
+
+docsIetfQosServiceFlowStatsEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosServiceFlowStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Describes a set of Service Flow statistics.
+                    An entry in the table exists for each
+                    Service Flow ID.  The ifIndex is an
+                    ifType of docsCableMaclayer(127)."
+    INDEX {
+            ifIndex,
+            docsIetfQosServiceFlowId
+          }
+    ::= { docsIetfQosServiceFlowStatsTable 1 }
+
+DocsIetfQosServiceFlowStatsEntry ::= SEQUENCE {
+    docsIetfQosServiceFlowPkts                     Counter64,
+    docsIetfQosServiceFlowOctets                   Counter64,
+    docsIetfQosServiceFlowTimeCreated              TimeStamp,
+    docsIetfQosServiceFlowTimeActive               Counter32,
+    docsIetfQosServiceFlowPHSUnknowns              Counter32,
+    docsIetfQosServiceFlowPolicedDropPkts          Counter32,
+    docsIetfQosServiceFlowPolicedDelayPkts         Counter32
+    }
+
+docsIetfQosServiceFlowPkts OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "For outgoing Service Flows, this object counts the
+                    number of Packet Data PDUs forwarded to this
+                    Service Flow.  For incoming upstream CMTS service
+                    flows, this object counts the number of Packet
+                    Data PDUs actually received on the Service Flow
+                    identified by the SID for which the packet was
+                    scheduled.  CMs not classifying downstream packets
+                    may report this object's value as 0 for downstream
+                    Service Flows.  This object does not count
+                    MAC-specific management messages.
+
+                    Particularly for UGS flows, packets sent on the
+                    primary Service Flow in violation of the UGS grant
+                    size should be counted only by the instance of this
+                    object that is associated with the primary service
+
+                    flow.
+
+                    Unclassified upstream user data packets (i.e., non-
+                    MAC-management) forwarded to the primary upstream
+                    Service Flow should be counted by the instance of
+                    this object that is associated with the primary
+                    service flow.
+
+                    This object does include packets counted by
+                    docsIetfQosServiceFlowPolicedDelayPkts, but does not
+                    include packets counted by
+                    docsIetfQosServiceFlowPolicedDropPkts
+                    and docsIetfQosServiceFlowPHSUnknowns.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosServiceFlowStatsEntry 1 }
+
+docsIetfQosServiceFlowOctets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of octets from the byte after the MAC
+                    header HCS to the end of the CRC for all packets
+                    counted in the docsIetfQosServiceFlowPkts object for
+                    this row.  Note that this counts the octets after
+                    payload header suppression and before payload
+                    header expansion have been applied.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosServiceFlowStatsEntry 2 }
+
+docsIetfQosServiceFlowTimeCreated OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value of sysUpTime when the service flow
+                    was created."
+    ::= { docsIetfQosServiceFlowStatsEntry 3 }
+
+docsIetfQosServiceFlowTimeActive OBJECT-TYPE
+    SYNTAX          Counter32
+    UNITS           "seconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of seconds that the service flow
+                    has been active.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosServiceFlowStatsEntry 4 }
+
+docsIetfQosServiceFlowPHSUnknowns OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "For incoming upstream CMTS service flows, this
+                    object counts the number of packets received
+                    with an unknown payload header suppression index.
+                    The service flow is identified by the SID for which
+                    the packet was scheduled.
+
+                    On a CM, only this object's instance for the primary
+                    downstream service flow counts packets received with
+                    an unknown payload header suppression index.  All
+                    other downstream service flows on CM report this
+                    objects value as 0.
+
+                    All outgoing service flows report this object's
+                    value as 0.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosServiceFlowStatsEntry 5 }
+
+docsIetfQosServiceFlowPolicedDropPkts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "For outgoing service flows, this object counts the
+                    number of Packet Data PDUs classified to this
+                    service flow dropped due to:
+                       (1) implementation-dependent excessive delay
+                           while enforcing the Maximum Sustained
+                           Traffic Rate; or
+                       (2) UGS packets dropped due to exceeding the
+                           Unsolicited Grant Size with a
+                           Request/Transmission policy that requires
+                           such packets to be dropped.
+
+                    Classified packets dropped due to other reasons
+
+                    must be counted in ifOutDiscards for the interface
+                    of this service flow.  This object reports 0 for
+                    incoming service flows.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosServiceFlowStatsEntry 6 }
+
+docsIetfQosServiceFlowPolicedDelayPkts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "This object counts only outgoing packets delayed in
+                    order to maintain the Maximum Sustained Traffic
+                    Rate.  This object will always report a value of 0
+                    for UGS flows because the Maximum Sustained Traffic
+                    Rate does not apply.  This object is 0 for incoming
+                    service flows.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosServiceFlowStatsEntry 7 }
+
+--
+--  Upstream Service Flow Stats Table (CMTS ONLY)
+--
+docsIetfQosUpstreamStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosUpstreamStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes statistics associated with
+                    upstream service flows.  All counted frames must
+                    be received without a Frame Check Sequence (FCS)
+                    error."
+    ::= { docsIetfQosMIBObjects 5 }
+
+docsIetfQosUpstreamStatsEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosUpstreamStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Describes a set of upstream service flow
+                    statistics.  An entry in the table exists for each
+                    upstream Service Flow in a managed device.
+                    The ifIndex is an ifType of
+                    docsCableMaclayer(127)."
+    INDEX {
+
+            ifIndex,
+            docsIetfQosSID
+          }
+    ::= { docsIetfQosUpstreamStatsTable 1 }
+
+DocsIetfQosUpstreamStatsEntry ::= SEQUENCE {
+    docsIetfQosSID                            Unsigned32,
+    docsIetfQosUpstreamFragments              Counter32,
+    docsIetfQosUpstreamFragDiscards           Counter32,
+    docsIetfQosUpstreamConcatBursts           Counter32
+    }
+
+docsIetfQosSID OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..16383)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Identifies a service ID for an admitted or active
+                    upstream service flow."
+    ::= { docsIetfQosUpstreamStatsEntry 1 }
+
+docsIetfQosUpstreamFragments OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of fragmentation headers received on an
+                    upstream service flow, regardless of whether
+                    the fragment was correctly reassembled into a
+                    valid packet.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosUpstreamStatsEntry 2 }
+
+docsIetfQosUpstreamFragDiscards OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of upstream fragments discarded and not
+                    assembled into a valid upstream packet.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosUpstreamStatsEntry 3 }
+
+docsIetfQosUpstreamConcatBursts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of concatenation headers received on an
+                    upstream service flow.
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosUpstreamStatsEntry 4 }
+
+--
+--  Dynamic Service Stats Table
+--
+docsIetfQosDynamicServiceStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosDynamicServiceStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes statistics associated with the
+                    Dynamic Service Flows in a managed device."
+    ::= { docsIetfQosMIBObjects 6 }
+
+docsIetfQosDynamicServiceStatsEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosDynamicServiceStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Describes a set of dynamic service flow statistics.
+                    Two entries exist for each DOCSIS MAC layer
+                    interface for the upstream and downstream
+                    direction.  On the CMTS, the downstream direction
+                    row indicates messages transmitted or transactions
+                    originated by the CMTS.  The upstream direction row
+                    indicates messages received or transaction
+                    originated by the CM.  On the CM, the downstream
+                    direction row indicates messages received or
+                    transactions originated by the CMTS.  The upstream
+                    direction row indicates messages transmitted by
+                    the CM or transactions originated by the CM.
+                    The ifIndex is an ifType of
+                    docsCableMaclayer(127)."
+    INDEX {
+            ifIndex,
+            docsIetfQosIfDirection
+          }
+    ::= { docsIetfQosDynamicServiceStatsTable 1 }
+
+DocsIetfQosDynamicServiceStatsEntry ::= SEQUENCE {
+    docsIetfQosIfDirection                DocsIetfQosRfMacIfDirection,
+    docsIetfQosDSAReqs                    Counter32,
+    docsIetfQosDSARsps                    Counter32,
+    docsIetfQosDSAAcks                    Counter32,
+    docsIetfQosDSCReqs                    Counter32,
+    docsIetfQosDSCRsps                    Counter32,
+    docsIetfQosDSCAcks                    Counter32,
+    docsIetfQosDSDReqs                    Counter32,
+    docsIetfQosDSDRsps                    Counter32,
+    docsIetfQosDynamicAdds                Counter32,
+    docsIetfQosDynamicAddFails            Counter32,
+    docsIetfQosDynamicChanges             Counter32,
+    docsIetfQosDynamicChangeFails         Counter32,
+    docsIetfQosDynamicDeletes             Counter32,
+    docsIetfQosDynamicDeleteFails         Counter32,
+    docsIetfQosDCCReqs                    Counter32,
+    docsIetfQosDCCRsps                    Counter32,
+    docsIetfQosDCCAcks                    Counter32,
+    docsIetfQosDCCs                       Counter32,
+    docsIetfQosDCCFails                   Counter32
+   }
+
+docsIetfQosIfDirection OBJECT-TYPE
+    SYNTAX          DocsIetfQosRfMacIfDirection
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "The direction of interface."
+    ::= { docsIetfQosDynamicServiceStatsEntry 1 }
+
+docsIetfQosDSAReqs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Addition Requests,
+                    including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 2 }
+
+docsIetfQosDSARsps OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Addition Responses,
+                    including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 3 }
+
+docsIetfQosDSAAcks OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Addition
+                    Acknowledgements, including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 4 }
+
+docsIetfQosDSCReqs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Change Requests,
+                    including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 5 }
+
+docsIetfQosDSCRsps OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Change Responses,
+                    including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 6 }
+
+docsIetfQosDSCAcks OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Change
+                    Acknowledgements, including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 7 }
+
+docsIetfQosDSDReqs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Delete Requests,
+                    including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 8 }
+
+docsIetfQosDSDRsps OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Service Delete Responses,
+                    including retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 9 }
+
+docsIetfQosDynamicAdds OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of successful Dynamic Service Addition
+                    transactions.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 10 }
+
+docsIetfQosDynamicAddFails OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of failed Dynamic Service Addition
+                    transactions.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 11 }
+
+docsIetfQosDynamicChanges OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of successful Dynamic Service Change
+                    transactions.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 12 }
+
+docsIetfQosDynamicChangeFails OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of failed Dynamic Service Change
+                    transactions.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 13 }
+
+docsIetfQosDynamicDeletes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of successful Dynamic Service Delete
+                    transactions.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 14 }
+
+docsIetfQosDynamicDeleteFails OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of failed Dynamic Service Delete
+                    transactions.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 15 }
+
+docsIetfQosDCCReqs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Channel Change Request
+                    messages traversing an interface.  This count
+                    is nonzero only on downstream direction rows.
+                    This count should include the number of retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex
+                    that indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 16 }
+
+docsIetfQosDCCRsps OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Channel Change Response
+                    messages traversing an interface.  This count is
+                    nonzero only on upstream direction rows.  This count
+                    should include the number of retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 17 }
+
+docsIetfQosDCCAcks OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of Dynamic Channel Change Acknowledgement
+                    messages traversing an interface.  This count
+                    is nonzero only on downstream direction rows.
+                    This count should include the number of retries.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 18 }
+
+docsIetfQosDCCs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of successful Dynamic Channel Change
+                    transactions.  This count is nonzero only on
+                    downstream direction rows.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 19 }
+
+docsIetfQosDCCFails OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of failed Dynamic Channel Change
+                    transactions.  This count is nonzero only on
+                    downstream direction rows.
+
+                    This counter's last discontinuity is the
+                    ifCounterDiscontinuityTime for the same ifIndex that
+                    indexes this object."
+    ::= { docsIetfQosDynamicServiceStatsEntry 20 }
+
+--
+--  Service Flow Log Table (CMTS ONLY)
+--
+docsIetfQosServiceFlowLogTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosServiceFlowLogEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table contains a log of the disconnected
+                    Service Flows in a managed device."
+    ::= { docsIetfQosMIBObjects 7 }
+
+docsIetfQosServiceFlowLogEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosServiceFlowLogEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "The information regarding a single disconnected
+                    service flow."
+    INDEX {
+            docsIetfQosServiceFlowLogIndex
+          }
+    ::= { docsIetfQosServiceFlowLogTable 1 }
+
+DocsIetfQosServiceFlowLogEntry ::= SEQUENCE {
+
+    docsIetfQosServiceFlowLogIndex                 Unsigned32,
+    docsIetfQosServiceFlowLogIfIndex               InterfaceIndex,
+    docsIetfQosServiceFlowLogSFID                  Unsigned32,
+    docsIetfQosServiceFlowLogCmMac                 MacAddress,
+    docsIetfQosServiceFlowLogPkts                  Counter64,
+    docsIetfQosServiceFlowLogOctets                Counter64,
+    docsIetfQosServiceFlowLogTimeDeleted           TimeStamp,
+    docsIetfQosServiceFlowLogTimeCreated           TimeStamp,
+    docsIetfQosServiceFlowLogTimeActive            Counter32,
+    docsIetfQosServiceFlowLogDirection    DocsIetfQosRfMacIfDirection,
+    docsIetfQosServiceFlowLogPrimary               TruthValue,
+    docsIetfQosServiceFlowLogServiceClassName      SnmpAdminString,
+    docsIetfQosServiceFlowLogPolicedDropPkts       Counter32,
+    docsIetfQosServiceFlowLogPolicedDelayPkts      Counter32,
+    docsIetfQosServiceFlowLogControl               INTEGER
+    }
+
+docsIetfQosServiceFlowLogIndex OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Unique index for a logged service flow."
+    ::= { docsIetfQosServiceFlowLogEntry 1 }
+
+docsIetfQosServiceFlowLogIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The ifIndex of ifType docsCableMaclayer(127)
+                    on the CMTS where the service flow was present."
+    ::= {  docsIetfQosServiceFlowLogEntry 2 }
+
+docsIetfQosServiceFlowLogSFID    OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The index assigned to the service flow by the CMTS."
+    ::= {  docsIetfQosServiceFlowLogEntry 3 }
+
+docsIetfQosServiceFlowLogCmMac OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The MAC address for the cable modem associated with
+                    the service flow."
+    ::= { docsIetfQosServiceFlowLogEntry 4 }
+
+docsIetfQosServiceFlowLogPkts OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of packets counted on this service flow
+                    after payload header suppression."
+    ::= { docsIetfQosServiceFlowLogEntry 5 }
+
+docsIetfQosServiceFlowLogOctets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The number of octets counted on this service flow
+                    after payload header suppression."
+    ::= { docsIetfQosServiceFlowLogEntry 6 }
+
+docsIetfQosServiceFlowLogTimeDeleted OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value of sysUpTime when the service flow
+                    was deleted."
+    ::= { docsIetfQosServiceFlowLogEntry 7 }
+
+docsIetfQosServiceFlowLogTimeCreated OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value of sysUpTime when the service flow
+                    was created."
+    ::= { docsIetfQosServiceFlowLogEntry 8 }
+
+docsIetfQosServiceFlowLogTimeActive OBJECT-TYPE
+    SYNTAX          Counter32
+    UNITS           "seconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The total time that the service flow was active."
+    ::= { docsIetfQosServiceFlowLogEntry 9 }
+
+docsIetfQosServiceFlowLogDirection OBJECT-TYPE
+    SYNTAX          DocsIetfQosRfMacIfDirection
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value of docsIetfQosServiceFlowDirection
+                    for the service flow."
+    ::= { docsIetfQosServiceFlowLogEntry  10 }
+
+docsIetfQosServiceFlowLogPrimary OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value of docsIetfQosServiceFlowPrimary for the
+                    service flow."
+    ::= { docsIetfQosServiceFlowLogEntry 11 }
+
+docsIetfQosServiceFlowLogServiceClassName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The value of docsIetfQosParamSetServiceClassName for
+                    the provisioned QOS Parameter Set of the
+                    service flow."
+    ::= { docsIetfQosServiceFlowLogEntry  12 }
+
+docsIetfQosServiceFlowLogPolicedDropPkts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The final value of
+                    docsIetfQosServiceFlowPolicedDropPkts for the
+                    service flow."
+    ::= { docsIetfQosServiceFlowLogEntry  13 }
+
+docsIetfQosServiceFlowLogPolicedDelayPkts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The final value of
+                    docsIetfQosServiceFlowPolicedDelayPkts for the
+                    service flow."
+    ::= { docsIetfQosServiceFlowLogEntry  14 }
+
+docsIetfQosServiceFlowLogControl OBJECT-TYPE
+    SYNTAX          INTEGER {
+                     active(1),
+                     destroy(6)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION    "Setting this object to the value destroy(6) removes
+                    this entry from the table.
+
+                    Reading this object returns the value active(1)."
+    ::= { docsIetfQosServiceFlowLogEntry 15 }
+
+--
+-- Service Class Table (CMTS ONLY)
+--
+docsIetfQosServiceClassTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosServiceClassEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes the set of DOCSIS-QOS
+                    Service Classes in a CMTS."
+    ::= { docsIetfQosMIBObjects 8 }
+
+docsIetfQosServiceClassEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosServiceClassEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "A provisioned service class on a CMTS.
+                    Each entry defines a template for certain
+                    DOCSIS QOS Parameter Set values.  When a CM
+                    creates or modifies an Admitted QOS Parameter Set
+                    for a Service Flow, it may reference a Service Class
+                    Name instead of providing explicit QOS Parameter
+                    Set values.  In this case, the CMTS populates
+                    the QOS Parameter Set with the applicable
+                    corresponding values from the named Service Class.
+                    Subsequent changes to a Service Class row do not
+                    affect the QOS Parameter Set values of any service
+                    flows already admitted.
+
+                    A service class template applies to only
+                    a single direction, as indicated in the
+                    docsIetfQosServiceClassDirection object."
+    INDEX {
+             docsIetfQosServiceClassName
+          }
+    ::= { docsIetfQosServiceClassTable 1 }
+
+DocsIetfQosServiceClassEntry ::= SEQUENCE {
+    docsIetfQosServiceClassName               SnmpAdminString,
+    docsIetfQosServiceClassStatus             RowStatus,
+    docsIetfQosServiceClassPriority           Integer32,
+    docsIetfQosServiceClassMaxTrafficRate     DocsIetfQosBitRate,
+    docsIetfQosServiceClassMaxTrafficBurst    Unsigned32,
+    docsIetfQosServiceClassMinReservedRate    DocsIetfQosBitRate,
+    docsIetfQosServiceClassMinReservedPkt     Integer32,
+    docsIetfQosServiceClassMaxConcatBurst     Integer32,
+    docsIetfQosServiceClassNomPollInterval    Unsigned32,
+    docsIetfQosServiceClassTolPollJitter      Unsigned32,
+    docsIetfQosServiceClassUnsolicitGrantSize Integer32,
+    docsIetfQosServiceClassNomGrantInterval   Unsigned32,
+    docsIetfQosServiceClassTolGrantJitter     Unsigned32,
+    docsIetfQosServiceClassGrantsPerInterval  Integer32,
+    docsIetfQosServiceClassMaxLatency         Unsigned32,
+    docsIetfQosServiceClassActiveTimeout      Integer32,
+    docsIetfQosServiceClassAdmittedTimeout    Integer32,
+    docsIetfQosServiceClassSchedulingType     DocsIetfQosSchedulingType,
+    docsIetfQosServiceClassRequestPolicy      OCTET STRING,
+    docsIetfQosServiceClassTosAndMask         OCTET STRING,
+    docsIetfQosServiceClassTosOrMask          OCTET STRING,
+    docsIetfQosServiceClassDirection        DocsIetfQosRfMacIfDirection,
+    docsIetfQosServiceClassStorageType        StorageType,
+    docsIetfQosServiceClassDSCPOverwrite      DscpOrAny
+    }
+
+docsIetfQosServiceClassName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE (1..15))
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Service Class Name.  DOCSIS specifies that the
+                    maximum size is 16 ASCII characters including
+                    a terminating zero.  The terminating zero is not
+                    represented in this SnmpAdminString syntax object."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.3.4"
+    ::= { docsIetfQosServiceClassEntry 1 }
+
+docsIetfQosServiceClassStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Used to create or delete rows in this table.
+                    There is no restriction on the ability to change
+                    values in this row while the row is active.
+                    Inactive rows need not be timed out."
+    ::= { docsIetfQosServiceClassEntry 2 }
+
+docsIetfQosServiceClassPriority OBJECT-TYPE
+    SYNTAX          Integer32 (0..7)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetPriority."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 3 }
+
+docsIetfQosServiceClassMaxTrafficRate OBJECT-TYPE
+    SYNTAX          DocsIetfQosBitRate
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetMaxTrafficRate."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 4 }
+
+docsIetfQosServiceClassMaxTrafficBurst OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetMaxTrafficBurst."
+    DEFVAL          { 3044 }
+    ::= { docsIetfQosServiceClassEntry 5 }
+
+docsIetfQosServiceClassMinReservedRate OBJECT-TYPE
+    SYNTAX          DocsIetfQosBitRate
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSEtMinReservedRate."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 6 }
+
+docsIetfQosServiceClassMinReservedPkt OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetMinReservedPkt."
+    ::= { docsIetfQosServiceClassEntry 7 }
+
+docsIetfQosServiceClassMaxConcatBurst OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetMaxConcatBurst."
+    DEFVAL          { 1522 }
+    ::= { docsIetfQosServiceClassEntry 8 }
+
+docsIetfQosServiceClassNomPollInterval OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetNomPollInterval."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 9 }
+
+docsIetfQosServiceClassTolPollJitter OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetTolPollJitter."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 10 }
+
+docsIetfQosServiceClassUnsolicitGrantSize OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetUnsolicitGrantSize."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 11 }
+
+docsIetfQosServiceClassNomGrantInterval OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetNomGrantInterval."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 12 }
+
+docsIetfQosServiceClassTolGrantJitter OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetTolGrantJitter."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 13 }
+
+docsIetfQosServiceClassGrantsPerInterval OBJECT-TYPE
+    SYNTAX          Integer32 (0..127)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetGrantsPerInterval."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 14 }
+
+docsIetfQosServiceClassMaxLatency OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetClassMaxLatency."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.7.1"
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 15 }
+
+docsIetfQosServiceClassActiveTimeout OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    UNITS           "seconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetActiveTimeout."
+    DEFVAL          { 0 }
+    ::= { docsIetfQosServiceClassEntry 16 }
+
+docsIetfQosServiceClassAdmittedTimeout OBJECT-TYPE
+    SYNTAX          Integer32 (0..65535)
+    UNITS           "seconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetAdmittedTimeout."
+    DEFVAL          { 200 }
+    ::= { docsIetfQosServiceClassEntry 17 }
+
+docsIetfQosServiceClassSchedulingType OBJECT-TYPE
+    SYNTAX          DocsIetfQosSchedulingType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetSchedulingType."
+    DEFVAL          { bestEffort }
+    ::= { docsIetfQosServiceClassEntry 18 }
+
+docsIetfQosServiceClassRequestPolicy OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(4))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetRequestPolicyOct."
+    DEFVAL          { '00000000'H } -- no bits are set
+    ::= { docsIetfQosServiceClassEntry 19 }
+
+docsIetfQosServiceClassTosAndMask OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetTosAndMask.
+                    The IP TOS octet as originally defined in RFC 791
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  Network operators SHOULD avoid
+                    specifying values of
+                    docsIetfQosServiceClassTosAndMask and
+                    docsIetfQosServiceClassTosOrMask that would result
+                    in the modification of the ECN bits.
+
+                    In particular, operators should not use values of
+                    docsIetfQosServiceClassTosAndMask that have either
+                    of the least-significant two bits set to 0.
+                    Similarly,operators should not use values of
+                    docsIetfQosServiceClassTosOrMask that have either
+                    of the least-significant two bits set to 1."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.10;
+                    RFC 3168, The Addition of Explicit Congestion
+                    Notification (ECN) to IP;
+                    RFC 3260, New Terminology and Clarifications for
+                    Diffserv."
+    ::= { docsIetfQosServiceClassEntry 20 }
+
+docsIetfQosServiceClassTosOrMask OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Template for docsIetfQosParamSetTosOrMask.
+                    The IP TOS octet as originally defined in RFC 791
+                    has been superseded by the 6-bit Differentiated
+                    Services Field (DSField, RFC 3260) and the 2-bit
+                    Explicit Congestion Notification Field (ECN field,
+                    RFC 3168).  Network operators SHOULD avoid
+                    specifying values of
+                    docsIetfQosServiceClassTosAndMask and
+                    docsIetfQosServiceClassTosOrMask that would result
+                    in the modification of the ECN bits.
+
+                    In particular, operators should not use values of
+                    docsIetfQosServiceClassTosAndMask that have either
+                    of the least-significant two bits set to 0.
+                    Similarly, operators should not use values of
+                    docsIetfQosServiceClassTosOrMask that have either
+                    of the least-significant two bits set to 1."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.2.6.10;
+                    RFC 3168, The Addition of Explicit Congestion
+                    Notification (ECN) to IP;
+                    RFC 3260, New Terminology and Clarifications for
+                    Diffserv."
+    ::= { docsIetfQosServiceClassEntry 21 }
+
+docsIetfQosServiceClassDirection OBJECT-TYPE
+    SYNTAX          DocsIetfQosRfMacIfDirection
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Specifies whether the service class template
+                    applies to upstream or downstream service flows."
+    DEFVAL          { upstream }
+    ::= { docsIetfQosServiceClassEntry 22 }
+
+docsIetfQosServiceClassStorageType OBJECT-TYPE
+    SYNTAX          StorageType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "This object defines whether this row is kept in
+                    volatile storage and lost upon reboot or whether
+                    it is backed up by non-volatile or permanent
+                    storage.  'permanent' entries need not allow
+                    writable access to any object."
+    DEFVAL { nonVolatile }
+    ::= { docsIetfQosServiceClassEntry 23 }
+
+docsIetfQosServiceClassDSCPOverwrite OBJECT-TYPE
+    SYNTAX          DscpOrAny
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "This object allows the overwrite of the DSCP
+                    field per RFC 3260.
+
+                    If this object is -1, then the corresponding entry's
+                    docsIetfQosServiceClassTosAndMask value MUST be
+                    'FF'H and docsIetfQosServiceClassTosOrMask MUST be
+                    '00'H.  Otherwise, this object is in the range of
+                    0..63, and the corresponding entry's
+                    docsIetfQosServiceClassTosAndMask value MUST be
+                    '03'H and the docsIetfQosServiceClassTosOrMask MUST
+                    be this object's value shifted left by two bit
+                    positions."
+    REFERENCE      "RFC 3168, The Addition of Explicit Congestion
+                    Notification (ECN) to IP;
+                    RFC 3260, New Terminology and Clarifications for
+                    Diffserv."
+    DEFVAL          { -1 }
+    ::= { docsIetfQosServiceClassEntry 24 }
+
+--
+-- Service Class PolicyTable
+--
+docsIetfQosServiceClassPolicyTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosServiceClassPolicyEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes the set of DOCSIS-QOS
+                    Service Class Policies.
+
+                    This table is an adjunct to the
+
+                    docsDevFilterPolicy table.   Entries in the
+                    docsDevFilterPolicy table can point to
+                    specific rows in this table.
+
+                    This table permits mapping a packet to a service
+                    class name of an active service flow so long as
+                    a classifier does not exist at a higher
+                    priority."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix E.2.1"
+    ::= { docsIetfQosMIBObjects 9 }
+
+docsIetfQosServiceClassPolicyEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosServiceClassPolicyEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "A service class name policy entry."
+    INDEX {
+            docsIetfQosServiceClassPolicyIndex
+          }
+    ::= { docsIetfQosServiceClassPolicyTable 1 }
+
+DocsIetfQosServiceClassPolicyEntry ::= SEQUENCE {
+    docsIetfQosServiceClassPolicyIndex        Unsigned32,
+    docsIetfQosServiceClassPolicyName         SnmpAdminString,
+    docsIetfQosServiceClassPolicyRulePriority Integer32,
+    docsIetfQosServiceClassPolicyStatus       RowStatus,
+    docsIetfQosServiceClassPolicyStorageType  StorageType
+    }
+
+docsIetfQosServiceClassPolicyIndex OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..2147483647)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "Index value to identify an entry in
+                    this table uniquely."
+    ::= { docsIetfQosServiceClassPolicyEntry 1 }
+
+docsIetfQosServiceClassPolicyName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Service Class Name to identify the name of the
+                    service class flow to which the packet should be
+                    directed."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix E.2.1"
+    ::= { docsIetfQosServiceClassPolicyEntry 2 }
+
+docsIetfQosServiceClassPolicyRulePriority OBJECT-TYPE
+    SYNTAX          Integer32 (0..255)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Service Class Policy rule priority for the
+                    entry."
+    REFERENCE      "SP-RFIv2.0-I06-040804, Appendix C.2.1.3.5"
+    ::= { docsIetfQosServiceClassPolicyEntry 3 }
+
+docsIetfQosServiceClassPolicyStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "Used to create or delete rows in this table.
+                    This object should not be deleted if it is
+                    referenced by an entry in docsDevFilterPolicy.
+                    The reference should be deleted first.
+                    There is no restriction on the ability
+                    to change values in this row while the row is
+                    active.  Inactive rows need not be timed out."
+    ::= { docsIetfQosServiceClassPolicyEntry 4 }
+
+docsIetfQosServiceClassPolicyStorageType OBJECT-TYPE
+    SYNTAX          StorageType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION    "This object defines whether this row is kept in
+                    volatile storage and lost upon reboot or whether
+                    it is backed up by non-volatile or permanent
+                    storage.  'permanent' entries need not allow
+                    writable access to any object."
+    DEFVAL { nonVolatile }
+    ::= { docsIetfQosServiceClassPolicyEntry 5 }
+
+--
+-- Payload Header Suppression(PHS) Table
+--
+docsIetfQosPHSTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosPHSEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table describes the set of payload header
+                    suppression entries."
+    ::= { docsIetfQosMIBObjects 10 }
+
+docsIetfQosPHSEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosPHSEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "A payload header suppression entry.
+
+                    The ifIndex is an ifType of docsCableMaclayer(127).
+                    The index docsIetfQosServiceFlowId selects one
+                    service flow from the cable MAC layer interface.
+                    The docsIetfQosPktClassId index matches an
+                    index of the docsIetfQosPktClassTable."
+    INDEX {
+            ifIndex,
+            docsIetfQosServiceFlowId,
+            docsIetfQosPktClassId
+          }
+    ::= { docsIetfQosPHSTable 1 }
+
+DocsIetfQosPHSEntry ::= SEQUENCE {
+    docsIetfQosPHSField            OCTET STRING,
+    docsIetfQosPHSMask             OCTET STRING,
+    docsIetfQosPHSSize             Integer32,
+    docsIetfQosPHSVerify           TruthValue,
+    docsIetfQosPHSIndex            Integer32
+    }
+
+docsIetfQosPHSField         OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(0..255))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Payload header suppression field defines the
+                    bytes of the header that must be
+                    suppressed/restored by the sending/receiving
+                    device.
+
+                    The number of octets in this object should be
+                    the same as the value of docsIetfQosPHSSize."
+    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.1"
+    ::= { docsIetfQosPHSEntry 1 }
+
+docsIetfQosPHSMask          OBJECT-TYPE
+    SYNTAX          OCTET STRING(SIZE(0..32))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Payload header suppression mask defines the
+                    bit mask that is used in combination with the
+                    docsIetfQosPHSField.  It defines which bytes in
+                    the header must be suppressed/restored by the
+                    sending or receiving device.
+
+                    Each bit of this bit mask corresponds to a byte
+                    in the docsIetfQosPHSField, with the least
+
+                    significant bit corresponding to the first byte
+                    of the docsIetfQosPHSField.
+
+                    Each bit of the bit mask specifies whether
+                    the corresponding byte should be suppressed
+                    in the packet.  A bit value of '1' indicates that
+                    the byte should be suppressed by the sending
+                    device and restored by the receiving device.
+                    A bit value of '0' indicates that
+                    the byte should not be suppressed by the sending
+                    device or restored by the receiving device.
+
+                    If the bit mask does not contain a bit for each
+                    byte in the docsIetfQosPHSField, then the bit mask
+                    is extended with bit values of '1' to be the
+                    necessary length."
+    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.3"
+    ::= { docsIetfQosPHSEntry 2 }
+
+docsIetfQosPHSSize          OBJECT-TYPE
+    SYNTAX          Integer32 (0..255)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Payload header suppression size specifies the
+                    number of bytes in the header to be suppressed
+                    and restored.
+
+                    The value of this object must match the number
+                    of bytes in the docsIetfQosPHSField."
+    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.4"
+    ::= { docsIetfQosPHSEntry 3 }
+
+docsIetfQosPHSVerify       OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Payload header suppression verification value.  If
+                    'true', the sender must verify docsIetfQosPHSField
+                    is the same as what is contained in the packet
+                    to be suppressed."
+    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.5"
+    ::= { docsIetfQosPHSEntry 4 }
+
+docsIetfQosPHSIndex         OBJECT-TYPE
+    SYNTAX          Integer32 (1..255)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "Payload header suppression index uniquely
+
+                    references the PHS rule for a given service flow."
+    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.2"
+    ::= { docsIetfQosPHSEntry 5 }
+
+--
+-- docsIetfQosCmtsMacToSrvFlowTable (CMTS Only)
+--
+docsIetfQosCmtsMacToSrvFlowTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF DocsIetfQosCmtsMacToSrvFlowEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "This table provides for referencing the service
+                    flows associated with a particular cable modem.
+                    This allows indexing into other docsIetfQos
+                    tables that are indexed by docsIetfQosServiceFlowId
+                    and ifIndex."
+    ::= { docsIetfQosMIBObjects 11 }
+
+docsIetfQosCmtsMacToSrvFlowEntry OBJECT-TYPE
+    SYNTAX          DocsIetfQosCmtsMacToSrvFlowEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "An entry is created by CMTS for each service flow
+                    connected to this CMTS."
+    INDEX {
+            docsIetfQosCmtsCmMac,
+            docsIetfQosCmtsServiceFlowId
+          }
+    ::= { docsIetfQosCmtsMacToSrvFlowTable 1 }
+
+DocsIetfQosCmtsMacToSrvFlowEntry ::= SEQUENCE {
+    docsIetfQosCmtsCmMac                MacAddress,
+    docsIetfQosCmtsServiceFlowId        Unsigned32,
+    docsIetfQosCmtsIfIndex              InterfaceIndex
+    }
+
+docsIetfQosCmtsCmMac OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "The MAC address for the referenced CM."
+    ::= { docsIetfQosCmtsMacToSrvFlowEntry 1 }
+
+docsIetfQosCmtsServiceFlowId OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION    "An index assigned to a service flow by CMTS."
+    ::= { docsIetfQosCmtsMacToSrvFlowEntry 2 }
+
+docsIetfQosCmtsIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION    "The ifIndex of ifType docsCableMacLayer(127)
+                    on the CMTS that is connected to the Cable Modem."
+    ::= { docsIetfQosCmtsMacToSrvFlowEntry 3 }
+
+--
+-- Conformance definitions
+--
+docsIetfQosConformance  OBJECT IDENTIFIER
+        ::= { docsIetfQosMIB 2 }
+
+docsIetfQosGroups       OBJECT IDENTIFIER
+        ::= { docsIetfQosConformance 1 }
+
+docsIetfQosCompliances  OBJECT IDENTIFIER
+        ::= { docsIetfQosConformance 2 }
+
+docsIetfQosCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for MCNS Cable Modems and
+         Cable Modem Termination Systems that implement DOCSIS
+         Service Flows."
+
+    MODULE  -- docsIetfQosMIB
+        MANDATORY-GROUPS { docsIetfQosBaseGroup }
+
+        GROUP docsIetfQosCmtsGroup
+        DESCRIPTION
+            "This group is mandatory for Cable Modem Termination
+             Systems (CMTS) and is not implemented for Cable Modems
+             (CM)."
+
+        GROUP docsIetfQosParamSetGroup
+        DESCRIPTION
+            "This group is mandatory for Cable Modem Termination
+             Systems (CMTS) and Cable Modems.  Cable modems only
+             implement objects in this group as read-only."
+
+        GROUP docsIetfQosSrvClassPolicyGroup
+        DESCRIPTION
+            "This group is optional for Cable Modem Termination
+
+             Systems (CMTS) and Cable Modems.  This group is relevant
+             if policy-based service flow classification
+             is implemented.  See docsDevPolicyTable in
+             DOCS-CABLE-DEVICE-MIB for more details."
+
+        GROUP docsIetfQosServiceClassGroup
+        DESCRIPTION
+            "This group is mandatory for a Cable Modem Termination
+             System (CMTS) that implements expansion of Service Class
+             Names in a QOS Parameter Set.  This group is
+             not implemented on the Cable Modems."
+
+        OBJECT  docsIetfQosPktClassPkts
+        DESCRIPTION
+            "This object only needs to be implemented in entries
+             that are classifying packets and not policing packets."
+
+        OBJECT  docsIetfQosPktClassInetAddressType
+        SYNTAX InetAddressType { ipv4(1) }
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+             address."
+
+        OBJECT  docsIetfQosPktClassInetSourceAddr
+        SYNTAX InetAddress (SIZE(4))
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+             address."
+
+        OBJECT  docsIetfQosPktClassInetSourceMask
+        SYNTAX InetAddress (SIZE(4))
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+             address."
+
+        OBJECT  docsIetfQosPktClassInetDestAddr
+        SYNTAX InetAddress (SIZE(4))
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+             address."
+
+        OBJECT  docsIetfQosPktClassInetDestMask
+        SYNTAX InetAddress (SIZE(4))
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+             address."
+
+        OBJECT  docsIetfQosServiceClassStorageType
+        SYNTAX StorageType { nonVolatile(3) }
+        DESCRIPTION
+            "An implementation is only required to support nonvolatile
+             storage."
+
+        OBJECT  docsIetfQosServiceClassPolicyStorageType
+        SYNTAX StorageType { nonVolatile(3) }
+        DESCRIPTION
+            "An implementation is only required to support nonvolatile
+             storage."
+    ::= { docsIetfQosCompliances 1 }
+
+docsIetfQosBaseGroup OBJECT-GROUP
+    OBJECTS {
+    docsIetfQosPktClassDirection,
+    docsIetfQosPktClassPriority,
+    docsIetfQosPktClassIpTosLow,
+    docsIetfQosPktClassIpTosHigh,
+    docsIetfQosPktClassIpTosMask,
+    docsIetfQosPktClassIpProtocol,
+    docsIetfQosPktClassSourcePortStart,
+    docsIetfQosPktClassSourcePortEnd,
+    docsIetfQosPktClassDestPortStart,
+    docsIetfQosPktClassDestPortEnd,
+    docsIetfQosPktClassDestMacAddr,
+    docsIetfQosPktClassDestMacMask,
+    docsIetfQosPktClassSourceMacAddr,
+    docsIetfQosPktClassEnetProtocolType,
+    docsIetfQosPktClassEnetProtocol,
+    docsIetfQosPktClassUserPriLow,
+    docsIetfQosPktClassUserPriHigh,
+    docsIetfQosPktClassVlanId,
+    docsIetfQosPktClassStateActive,
+    docsIetfQosPktClassPkts,
+    docsIetfQosPktClassBitMap,
+    docsIetfQosPktClassInetAddressType,
+    docsIetfQosPktClassInetSourceAddr,
+    docsIetfQosPktClassInetSourceMask,
+    docsIetfQosPktClassInetDestAddr,
+    docsIetfQosPktClassInetDestMask,
+    docsIetfQosServiceFlowSID,
+    docsIetfQosServiceFlowDirection,
+    docsIetfQosServiceFlowPrimary,
+    docsIetfQosServiceFlowPkts,
+    docsIetfQosServiceFlowOctets,
+    docsIetfQosServiceFlowTimeCreated,
+    docsIetfQosServiceFlowTimeActive,
+    docsIetfQosServiceFlowPHSUnknowns,
+    docsIetfQosServiceFlowPolicedDropPkts,
+    docsIetfQosServiceFlowPolicedDelayPkts,
+    docsIetfQosDSAReqs,
+    docsIetfQosDSARsps,
+    docsIetfQosDSAAcks,
+    docsIetfQosDSCReqs,
+    docsIetfQosDSCRsps,
+    docsIetfQosDSCAcks,
+    docsIetfQosDSDReqs,
+    docsIetfQosDSDRsps,
+    docsIetfQosDynamicAdds,
+    docsIetfQosDynamicAddFails,
+    docsIetfQosDynamicChanges,
+    docsIetfQosDynamicChangeFails,
+    docsIetfQosDynamicDeletes,
+    docsIetfQosDynamicDeleteFails,
+    docsIetfQosDCCReqs,
+    docsIetfQosDCCRsps,
+    docsIetfQosDCCAcks,
+    docsIetfQosDCCs,
+    docsIetfQosDCCFails,
+    docsIetfQosPHSField,
+    docsIetfQosPHSMask,
+    docsIetfQosPHSSize,
+    docsIetfQosPHSVerify,
+    docsIetfQosPHSIndex
+    }
+    STATUS  current
+    DESCRIPTION
+        "Group of objects implemented in both Cable Modems and
+         Cable Modem Termination Systems."
+    ::= { docsIetfQosGroups 1 }
+
+docsIetfQosParamSetGroup OBJECT-GROUP
+    OBJECTS {
+    docsIetfQosParamSetServiceClassName,
+    docsIetfQosParamSetPriority,
+    docsIetfQosParamSetMaxTrafficRate,
+    docsIetfQosParamSetMaxTrafficBurst,
+    docsIetfQosParamSetMinReservedRate,
+    docsIetfQosParamSetMinReservedPkt,
+    docsIetfQosParamSetActiveTimeout,
+    docsIetfQosParamSetAdmittedTimeout,
+    docsIetfQosParamSetMaxConcatBurst,
+    docsIetfQosParamSetSchedulingType,
+    docsIetfQosParamSetNomPollInterval,
+    docsIetfQosParamSetTolPollJitter,
+    docsIetfQosParamSetUnsolicitGrantSize,
+    docsIetfQosParamSetNomGrantInterval,
+    docsIetfQosParamSetTolGrantJitter,
+    docsIetfQosParamSetGrantsPerInterval,
+    docsIetfQosParamSetTosAndMask,
+    docsIetfQosParamSetTosOrMask,
+    docsIetfQosParamSetMaxLatency,
+    docsIetfQosParamSetRequestPolicyOct,
+    docsIetfQosParamSetBitMap
+    }
+    STATUS  current
+    DESCRIPTION
+        "Group of objects implemented in both Cable Modems and
+         Cable Modem Termination Systems for QOS Parameter Sets."
+    ::= { docsIetfQosGroups 2 }
+
+docsIetfQosCmtsGroup OBJECT-GROUP
+    OBJECTS {
+
+    docsIetfQosUpstreamFragments,
+    docsIetfQosUpstreamFragDiscards,
+    docsIetfQosUpstreamConcatBursts,
+    docsIetfQosServiceFlowLogIfIndex,
+    docsIetfQosServiceFlowLogSFID,
+    docsIetfQosServiceFlowLogCmMac,
+    docsIetfQosServiceFlowLogPkts,
+    docsIetfQosServiceFlowLogOctets,
+    docsIetfQosServiceFlowLogTimeDeleted,
+    docsIetfQosServiceFlowLogTimeCreated,
+    docsIetfQosServiceFlowLogTimeActive,
+    docsIetfQosServiceFlowLogDirection,
+    docsIetfQosServiceFlowLogPrimary,
+    docsIetfQosServiceFlowLogServiceClassName,
+    docsIetfQosServiceFlowLogPolicedDropPkts,
+    docsIetfQosServiceFlowLogPolicedDelayPkts,
+    docsIetfQosServiceFlowLogControl,
+    docsIetfQosCmtsIfIndex -- docsIetfQosCmtsMacToSrvFlowTable required
+
+    }
+    STATUS  current
+    DESCRIPTION
+        "Group of objects implemented only in the CMTS."
+    ::= { docsIetfQosGroups 3 }
+
+docsIetfQosSrvClassPolicyGroup OBJECT-GROUP
+    OBJECTS {
+    docsIetfQosServiceClassPolicyName,
+    docsIetfQosServiceClassPolicyRulePriority,
+    docsIetfQosServiceClassPolicyStatus,
+    docsIetfQosServiceClassPolicyStorageType
+    }
+    STATUS  current
+    DESCRIPTION
+        "Group of objects implemented in both Cable Modems and
+         Cable Modem Termination Systems when supporting policy-based
+         service flows."
+    ::= { docsIetfQosGroups 4 }
+
+docsIetfQosServiceClassGroup OBJECT-GROUP
+    OBJECTS {
+    docsIetfQosServiceClassStatus,
+    docsIetfQosServiceClassPriority,
+    docsIetfQosServiceClassMaxTrafficRate,
+    docsIetfQosServiceClassMaxTrafficBurst,
+    docsIetfQosServiceClassMinReservedRate,
+    docsIetfQosServiceClassMinReservedPkt,
+    docsIetfQosServiceClassMaxConcatBurst,
+    docsIetfQosServiceClassNomPollInterval,
+    docsIetfQosServiceClassTolPollJitter,
+    docsIetfQosServiceClassUnsolicitGrantSize,
+    docsIetfQosServiceClassNomGrantInterval,
+    docsIetfQosServiceClassTolGrantJitter,
+    docsIetfQosServiceClassGrantsPerInterval,
+    docsIetfQosServiceClassMaxLatency,
+    docsIetfQosServiceClassActiveTimeout,
+    docsIetfQosServiceClassAdmittedTimeout,
+    docsIetfQosServiceClassSchedulingType,
+    docsIetfQosServiceClassRequestPolicy,
+    docsIetfQosServiceClassTosAndMask,
+    docsIetfQosServiceClassTosOrMask,
+    docsIetfQosServiceClassDirection,
+    docsIetfQosServiceClassStorageType,
+    docsIetfQosServiceClassDSCPOverwrite
+    }
+    STATUS  current
+    DESCRIPTION
+        "Group of objects implemented only in Cable Modem
+         Termination Systems when supporting expansion of Service
+         Class Names in a QOS Parameter Set"
+    ::= { docsIetfQosGroups 5 }
+
+END
diff --git a/snmp_builder/mibs/DOCS-IETF-SUBMGT-MIB.mib b/snmp_builder/mibs/DOCS-IETF-SUBMGT-MIB.mib
new file mode 100644
index 0000000..06d2446
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-IETF-SUBMGT-MIB.mib
@@ -0,0 +1,672 @@
+DOCS-IETF-SUBMGT-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        OBJECT-TYPE,
+        Integer32,
+        mib-2
+                FROM SNMPv2-SMI
+        RowStatus,
+        TruthValue,
+        TimeStamp,
+        StorageType
+                FROM SNMPv2-TC
+        OBJECT-GROUP,
+        MODULE-COMPLIANCE
+                FROM SNMPv2-CONF
+        InetAddressType,
+        InetAddress
+                FROM INET-ADDRESS-MIB
+        docsIfCmtsCmStatusIndex,
+        docsIfCmtsCmStatusEntry
+                FROM DOCS-IF-MIB  -- RFC2670
+        diffServMIBDataPathGroup,
+        diffServMIBClfrGroup,
+        diffServMIBClfrElementGroup,
+        diffServMIBMultiFieldClfrGroup,
+        diffServMIBActionGroup,
+        diffServMIBAlgDropGroup,
+        diffServMIBCounterGroup,
+        diffServDataPathStatus,
+        diffServClfrStatus,
+        diffServClfrElementStatus,
+        diffServMultiFieldClfrAddrType,
+        diffServMultiFieldClfrSrcAddr,
+        diffServMultiFieldClfrDstAddr,
+        diffServAlgDropStatus,
+        diffServDataPathStorage,
+        diffServClfrStorage,
+        diffServClfrElementStorage,
+        diffServMultiFieldClfrStorage,
+        diffServActionStorage,
+        diffServCountActStorage,
+        diffServAlgDropStorage,
+        diffServAlgDropType
+                FROM DIFFSERV-MIB  -- RFC3289
+     ;
+
+docsSubMgt MODULE-IDENTITY
+    LAST-UPDATED    "200503290000Z" -- March 29, 2005
+    ORGANIZATION    "IETF IP over Cable Data Network (IPCDN) Working
+                     Group"
+    CONTACT-INFO
+        "        Wilson Sawyer
+         Postal: 50 Kelly Brook Lane
+                 East Hampstead, NH 03826
+                 U.S.A.
+
+         Phone:  +1 603 382 7080
+         E-mail: wsawyer@ieee.org
+
+         IETF IPCDN Working Group
+         General Discussion: ipcdn@ietf.org
+         Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+         Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+         Co-chairs: Richard Woundy, Richard_Woundy@cable.comcast.com
+                    Jean-Francois Mule, jf.mule@cablelabs.com"
+    DESCRIPTION
+        "This is the CMTS centric subscriber management MIB for
+    DOCSIS-compliant CMTS.  It provides the objects to allow a Cable
+    Modem Termination operator to control the IP addresses and
+    protocols associated with subscribers' cable modems.
+
+    Copyright (C) The Internet Society (2005).  This version of this
+    MIB module is part of RFC 4036; see the RFC itself for full legal
+    notices."
+    REVISION "200503290000Z" -- March 29, 2005
+    DESCRIPTION
+       "Initial version, published as RFC 4036.  Note that the
+       compliance statements in this version apply only to
+       implementations that support DOCSIS 1.0/1.1/2.0, which
+       are not IPv6-capable."
+    ::= { mib-2 125 }
+
+docsSubMgtObjects OBJECT IDENTIFIER ::= { docsSubMgt 1 }
+
+docsSubMgtCpeControlTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF DocsSubMgtCpeControlEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This table AUGMENTs the docsIfCmtsCmStatusTable, adding
+    four WRITEable objects, as well as a read-only object, all of
+    which reflect the state of subscriber management on a particular
+    CM."
+    ::= { docsSubMgtObjects 1 }
+
+docsSubMgtCpeControlEntry OBJECT-TYPE
+    SYNTAX  DocsSubMgtCpeControlEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A row in the docsSubMgtCpeControlTable.  All values are set
+    at successful modem registration, either from the system default,
+    or from objects included in the DOCSIS registration request sent
+    upstream to the CMTS from the CM.  The contents of this entry are
+    meaningless unless the corresponding docsIfCmtsCmStatusValue (see
+    reference) is registrationComplete(6).  The persistence of this
+    row is determined solely by the lifespan of the corresponding
+    docsIfCmtsCmStatusEntry (normally StorageType=volatile)."
+    REFERENCE
+        "RFC 2670"
+    AUGMENTS { docsIfCmtsCmStatusEntry }
+    ::= {docsSubMgtCpeControlTable 1 }
+
+DocsSubMgtCpeControlEntry ::= SEQUENCE
+    {
+    docsSubMgtCpeControlMaxCpeIp        Integer32,
+    docsSubMgtCpeControlActive          TruthValue,
+    docsSubMgtCpeControlLearnable       TruthValue,
+    docsSubMgtCpeControlReset           TruthValue,
+    docsSubMgtCpeControlLastReset       TimeStamp
+    }
+
+docsSubMgtCpeControlMaxCpeIp OBJECT-TYPE
+    SYNTAX  Integer32(0..2147483647)
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The number of simultaneous IP addresses permitted behind
+    the CM.  If this is set to zero, all CPE traffic from the CM is
+    dropped.  If the provisioning object corresponding to
+    docsSubMgtCpeIpTable includes more CPE IP address entries for
+    this modem than the value of this object, then this object is
+    set to the count of the number of rows in docsSubMgtCpeIpTable
+    that have the same docsIfCmtsCmStatusIndex value.  (For example,
+    if the CM has 5 IP addresses specified for it, this value is 5.)
+    This limit applies to learned and DOCSIS-provisioned entries
+    but not to entries added through some administrative
+    process at the CMTS.  If not set through DOCSIS provisioning,
+    this object defaults to docsSubMgtCpeMaxIpDefault.  Note that
+    this object is only meaningful if docsSubMgtCpeControlActive
+    is true."
+    ::= { docsSubMgtCpeControlEntry 1 }
+
+docsSubMgtCpeControlActive OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "Controls the application of subscriber management to
+    this cable modem.  If this is set to true, CMTS-based CPE
+    control is active, and all the actions required by the various
+    filter tables and controls apply at the CMTS.  If this is set
+    to false, no subscriber management filtering is done at the
+    CMTS (but other filters may apply).  If not set through DOCSIS
+    provisioning, this object defaults to
+    docsSubMgtCpeActiveDefault."
+    ::= { docsSubMgtCpeControlEntry 2 }
+
+docsSubMgtCpeControlLearnable OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "Controls whether the CMTS may learn (and pass traffic
+    for) CPE IP addresses associated with a cable modem.  If this is
+    set to true, the CMTS may learn up to docsSubMgtMaxCpeIp
+
+    addresses (less any DOCSIS-provisioned entries) related to this
+    CM.  Those IP addresses are added (by internal process) to the
+    docsSubMgtCpeIpTable.  The nature of the learning mechanism is
+    not specified here.
+
+    If not set through DOCSIS provisioning, this object defaults to
+    docsSubMgtCpeLearnableDefault.  Note that this object is only
+    meaningful if docsSubMgtCpeControlActive is true."
+    ::= { docsSubMgtCpeControlEntry 3 }
+
+docsSubMgtCpeControlReset OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "This object always returns false on read.  If this object is
+    set to true, the rows with 'learned' addresses in
+    docsSubMgtCpeIpTable for this CM are deleted from that table."
+    ::= { docsSubMgtCpeControlEntry 4 }
+
+docsSubMgtCpeControlLastReset OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "The value of sysUpTime when docsSubMgtCpeControlReset was
+    last set true.  Zero if never reset."
+    DEFVAL { 0 }
+    ::= { docsSubMgtCpeControlEntry 5 }
+
+docsSubMgtCpeMaxIpDefault OBJECT-TYPE
+    SYNTAX  Integer32(0..2147483647)
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The default value for docsSubMgtCpeControlMaxCpeIp if not
+    signaled in the DOCSIS Registration request.  This value should
+    be treated as nonvolatile; if set, its value should persist
+    across device resets."
+    DEFVAL { 16 }
+    ::= { docsSubMgtObjects 2 }
+
+docsSubMgtCpeActiveDefault OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The default value for docsSubMgtCpeControlActive if not
+
+    signaled in the DOCSIS Registration request.  This value should
+    be treated as nonvolatile; if set, its value should persist
+    across device resets."
+    DEFVAL { false }
+    ::= { docsSubMgtObjects 3 }
+
+docsSubMgtCpeLearnableDefault OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The default value for docsSubMgtCpeControlLearnable if not
+    signaled in the DOCSIS Registration request.  This value should
+    be treated as nonvolatile; if set, its value should persist
+    across device resets."
+    DEFVAL { true }
+    ::= { docsSubMgtObjects 4 }
+
+docsSubMgtCpeIpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DocsSubMgtCpeIpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of CPE IP addresses known on a per-CM basis."
+    ::= { docsSubMgtObjects 5 }
+
+docsSubMgtCpeIpEntry OBJECT-TYPE
+    SYNTAX      DocsSubMgtCpeIpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the docsSubMgtCpeIpTable.  The first index is
+    the specific modem we're referring to, and the second index is
+    the specific CPE IP entry."
+    INDEX   { docsIfCmtsCmStatusIndex,
+              docsSubMgtCpeIpIndex }
+    ::= {docsSubMgtCpeIpTable 1 }
+
+DocsSubMgtCpeIpEntry ::= SEQUENCE
+    {
+    docsSubMgtCpeIpIndex        Integer32,
+    docsSubMgtCpeIpAddressType  InetAddressType,
+    docsSubMgtCpeIpAddr         InetAddress,
+    docsSubMgtCpeIpLearned      TruthValue
+    }
+
+docsSubMgtCpeIpIndex OBJECT-TYPE
+    SYNTAX      Integer32(1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index of this CPE IP address relative to the indexed CM.
+    An entry is created either through the included CPE IP addresses
+    in the provisioning object, or via learning.
+
+    If docsSubMgtCpeControlActive is true and a CMTS receives
+    an IP packet from a CM that contains a source IP address that
+    does not match one of the docsSubMgtCpeIpAddr entries for this
+    CM, one of two things occurs.  If the number of entries is less
+    than docsSubMgtCpeControlMaxCpeIp, the source address is added to
+    the table and the packet is forwarded.  If the number of entries
+    equals the docsSubMgtCpeControlMaxCpeIp, then the packet is
+    dropped."
+    ::= { docsSubMgtCpeIpEntry 1 }
+
+docsSubMgtCpeIpAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of internet address of docsSubMgtCpeIpAddr."
+    ::= { docsSubMgtCpeIpEntry 2 }
+
+docsSubMgtCpeIpAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP address either set from provisioning or learned via
+    address gleaning or other forwarding means.  See
+    docsSubMgtCpeIpIndex for the mechanism.
+
+    The type of this address is determined by the value of
+    docsSubMgtCpeIpAddressType."
+    ::= { docsSubMgtCpeIpEntry 3 }
+
+docsSubMgtCpeIpLearned OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "If true, this entry was learned from IP packets sent
+    upstream rather than from the provisioning objects."
+    ::= { docsSubMgtCpeIpEntry 4 }
+
+docsSubMgtCmFilterTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF DocsSubMgtCmFilterEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Binds filter groups to modems, identifying for each modem
+    the upstream and downstream filter groups that apply to packets
+    for that modem.  Normally, this table reflects the filter group
+    values signaled by DOCSIS Registration, although values may be
+    overridden by management action.
+
+    For each of the columns in this table, zero is a distinguished
+    value, indicating that the default filtering action is to be
+    taken rather than that associated with a filter group number.
+    Zero is used if the filter group is not signaled by DOCSIS
+    registration."
+    ::= { docsSubMgtObjects 6 }
+
+docsSubMgtCmFilterEntry OBJECT-TYPE
+    SYNTAX  DocsSubMgtCmFilterEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Binds a filter group to each direction of traffic for a
+    modem.  The filters in this entry apply if
+    docsSubMgtCpeControlActive is true.
+
+    The contents of this entry are meaningless unless the
+    corresponding docsIfCmtsCmStatusValue (see reference) is
+    registrationComplete(6).  The persistence of this row is
+    determined solely by the lifespan of the corresponding
+    docsIfCmtsCmStatusEntry (normally StorageType=volatile)."
+    REFERENCE
+        "RFC 2670"
+    AUGMENTS { docsIfCmtsCmStatusEntry }
+    ::= {docsSubMgtCmFilterTable 1 }
+
+DocsSubMgtCmFilterEntry ::= SEQUENCE
+    {
+    docsSubMgtCmFilterSubDownstream        Integer32,
+    docsSubMgtCmFilterSubUpstream          Integer32,
+    docsSubMgtCmFilterCmDownstream         Integer32,
+    docsSubMgtCmFilterCmUpstream           Integer32
+}
+
+docsSubMgtCmFilterSubDownstream OBJECT-TYPE
+    SYNTAX  Integer32(0..65535)
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The filter group applied to traffic destined for subscribers
+    attached to the referenced CM.  Upon row creation, this is set
+    either to zero (use default classification, the
+    diffServClfrElementSpecific=zeroDotZero row of
+    diffServClfrElementTable) or to the value in the provisioning
+    object sent upstream from the CM to the CMTS during registration.
+    The value of this object is the same as that of the filter group
+    index appearing as docsSubMgtFilterGroupIndex."
+    ::= { docsSubMgtCmFilterEntry 1 }
+
+docsSubMgtCmFilterSubUpstream OBJECT-TYPE
+    SYNTAX  Integer32(0..65535)
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The filter group applied to traffic originating from
+    subscribers attached to the referenced CM.  Upon row creation
+    this is set to either zero (use default classification, the
+    diffServClfrElementSpecific=zeroDotZero row of
+    diffServClfrElementTable), or to the value in the provisioning
+    object sent upstream from the CM to the CMTS.  The value of this
+    object is the same as that of the filter group index appearing as
+    docsSubMgtFilterGroupIndex."
+    ::= { docsSubMgtCmFilterEntry 2 }
+
+docsSubMgtCmFilterCmDownstream OBJECT-TYPE
+    SYNTAX  Integer32(0..65535)
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The filter group applied to traffic destined for the
+    referenced CM itself.  Upon row creation this is set either to
+    zero (use default classification, the
+    diffServClfrElementSpecific=zeroDotZero row of
+    diffServClfrElementTable), or to the value in the provisioning
+    object sent upstream from the CM to the CMTS during registration.
+    The value of this object is the same as that of the filter group
+    index appearing as docsSubMgtFilterGroupIndex."
+    ::= { docsSubMgtCmFilterEntry 3 }
+
+docsSubMgtCmFilterCmUpstream OBJECT-TYPE
+    SYNTAX  Integer32(0..65535)
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The filter group applied to traffic originating from the
+    referenced CM itself.  This is set upon row creation to either
+
+    zero (use default classification, the
+    diffServClfrElementSpecific=zeroDotZero row of
+    diffServClfrElementTable), or to the value in the provisioning
+    object sent upstream from the CM to the CMTS during registration.
+    The value of this object is the same as the filter group index
+    appearing as docsSubMgtFilterGroupIndex."
+    ::= { docsSubMgtCmFilterEntry 4 }
+
+docsSubMgtFilterGroupTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF DocsSubMgtFilterGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Provides a collection of referenceable entries to which
+    diffServClfrElementSpecific refers.  This table provides filter
+    group indices that can be compared with those signaled during
+    DOCSIS registration.  A packet matches an entry from this table
+    if the packet originated from or is destined to a cable modem
+    that registered this index as one of its four filter groups
+    (see docsSubMgtCmFilterTable), and if the packet direction and
+    MAC address select the use of this index among the four."
+    ::= { docsSubMgtObjects 7 }
+
+docsSubMgtFilterGroupEntry OBJECT-TYPE
+    SYNTAX  DocsSubMgtFilterGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An entry only exists if needed by the
+    diffServClfrElementEntry.  A packet matches this entry if the
+    packet's cable modem registered this index as one of its four
+    filter groups (see docsSubMgtCmFilterTable) and if the packet
+    direction and MAC address select the use of this index among
+    the four."
+    INDEX { docsSubMgtFilterGroupIndex }
+    ::= { docsSubMgtFilterGroupTable 1 }
+
+DocsSubMgtFilterGroupEntry ::= SEQUENCE
+    {
+    docsSubMgtFilterGroupIndex    Integer32
+    }
+
+docsSubMgtFilterGroupIndex OBJECT-TYPE
+    SYNTAX  Integer32(1..65535)
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "The filter group index, from the set signaled at DOCSIS
+
+    Registration.  Provides a referenceable entry to which
+    diffServClfrElementSpecific points.  A packet matches this
+    classifier entry if the packet's cable modem registered this
+    index value as one of its four filter groups, and if the packet
+    direction and MAC address select the use of this index among
+    the four.  Because this is the only field in this table, it is
+    read-only, contrary to the usual SMI custom of making indices
+    not-accessible.
+
+    Note that although zero may be signaled (or defaulted) at DOCSIS
+    Registration to indicate a default filtering group, no such entry
+    appears in this table, as diffServClfrElementSpecific will
+    use a zeroDotZero pointer for that classification."
+    ::= { docsSubMgtFilterGroupEntry 1 }
+
+docsSubMgtConformance OBJECT IDENTIFIER ::= { docsSubMgt 2 }
+docsSubMgtCompliances OBJECT IDENTIFIER ::=
+                                        { docsSubMgtConformance 1 }
+docsSubMgtGroups OBJECT IDENTIFIER      ::=
+                                        { docsSubMgtConformance 2 }
+
+docsSubMgtBasicCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for CMTS devices that implement
+    CMTS centric subscriber management.
+
+    This compliance statement applies to implementations that
+    support DOCSIS 1.0/1.1/2.0, which are not IPv6 capable."
+
+MODULE DIFFSERV-MIB -- RFC3289
+  MANDATORY-GROUPS {
+           diffServMIBDataPathGroup,
+           diffServMIBClfrGroup,
+           diffServMIBClfrElementGroup,
+           diffServMIBMultiFieldClfrGroup,
+           diffServMIBActionGroup,
+           diffServMIBAlgDropGroup,
+           diffServMIBCounterGroup
+           }
+
+OBJECT diffServDataPathStatus  -- same as RFC3289
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not required."
+
+OBJECT diffServClfrStatus  -- same as RFC3289
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not required."
+
+OBJECT diffServClfrElementStatus  -- same as RFC3289
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not required."
+
+OBJECT diffServMultiFieldClfrAddrType
+    SYNTAX  InetAddressType { ipv4(1) }
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+    addresses."
+
+OBJECT diffServMultiFieldClfrSrcAddr
+    SYNTAX  InetAddress (SIZE(4))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+    addresses."
+
+OBJECT diffServMultiFieldClfrDstAddr
+    SYNTAX  InetAddress (SIZE(4))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+    addresses."
+
+OBJECT diffServAlgDropStatus  -- same as RFC3289
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not required."
+
+OBJECT diffServDataPathStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServClfrStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServClfrElementStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServMultiFieldClfrStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServActionStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServCountActStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServAlgDropStorage
+    SYNTAX StorageType { nonVolatile(3) }
+    DESCRIPTION
+        "An implementation is only required to support nonvolatile
+    storage."
+
+OBJECT diffServAlgDropType
+    SYNTAX  INTEGER { alwaysDrop(5) }
+    DESCRIPTION
+        "For DOCSIS subscriber management, this object is
+    only used to provide packet filtering.  Implementations
+    need not support other values of this enumeration."
+
+MODULE -- This module i.e., DOCS-IETF-SUBMGT-MIB
+
+MANDATORY-GROUPS {
+        docsSubMgtGroup
+        }
+
+OBJECT docsSubMgtCpeControlMaxCpeIp
+    SYNTAX Integer32(0..16)
+    DESCRIPTION
+        "An implementation is only required to support up to
+    sixteen addresses per modem."
+
+OBJECT docsSubMgtCpeMaxIpDefault
+    SYNTAX Integer32(0..16)
+    DESCRIPTION
+        "An implementation is only required to support up to
+    sixteen addresses per modem."
+
+OBJECT docsSubMgtCpeIpAddressType
+    SYNTAX InetAddressType { ipv4(1) }
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+    addresses."
+
+OBJECT docsSubMgtCpeIpAddr
+    SYNTAX  InetAddress (SIZE(4))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+    addresses."
+
+OBJECT docsSubMgtCmFilterSubDownstream
+    SYNTAX  Integer32(0..30)
+    DESCRIPTION
+        "An implementation is only required to support thirty
+    filter groups."
+
+OBJECT docsSubMgtCmFilterSubUpstream
+    SYNTAX  Integer32(0..30)
+    DESCRIPTION
+        "An implementation is only required to support thirty
+    filter groups."
+
+OBJECT docsSubMgtCmFilterCmDownstream
+    SYNTAX  Integer32(0..30)
+    DESCRIPTION
+        "An implementation is only required to support thirty
+    filter groups."
+
+OBJECT docsSubMgtCmFilterCmUpstream
+    SYNTAX  Integer32(0..30)
+    DESCRIPTION
+        "An implementation is only required to support thirty
+    filter groups."
+        ::= { docsSubMgtCompliances 1 }
+
+docsSubMgtGroup OBJECT-GROUP
+        OBJECTS {
+            docsSubMgtCpeControlMaxCpeIp,
+            docsSubMgtCpeControlActive,
+            docsSubMgtCpeControlLearnable,
+            docsSubMgtCpeControlReset,
+            docsSubMgtCpeControlLastReset,
+            docsSubMgtCpeMaxIpDefault,
+            docsSubMgtCpeActiveDefault,
+            docsSubMgtCpeLearnableDefault,
+            docsSubMgtCpeIpAddressType,
+            docsSubMgtCpeIpAddr,
+            docsSubMgtCpeIpLearned,
+            docsSubMgtCmFilterSubDownstream,
+            docsSubMgtCmFilterSubUpstream,
+            docsSubMgtCmFilterCmDownstream,
+            docsSubMgtCmFilterCmUpstream,
+            docsSubMgtFilterGroupIndex
+            }
+            STATUS      current
+            DESCRIPTION
+                "The objects used to manage host-based cable modems
+            via a set of CMTS enforced controls."
+            ::= {  docsSubMgtGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/DOCS-IF-MIB.mib b/snmp_builder/mibs/DOCS-IF-MIB.mib
new file mode 100644
index 0000000..46fa552
--- /dev/null
+++ b/snmp_builder/mibs/DOCS-IF-MIB.mib
@@ -0,0 +1,5291 @@
+DOCS-IF-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+     MODULE-IDENTITY,
+     OBJECT-TYPE,
+     Unsigned32,
+     Integer32,
+     Counter32,
+     Counter64,
+     TimeTicks,
+     IpAddress,
+     transmission
+             FROM SNMPv2-SMI        -- [RFC2578]
+     TEXTUAL-CONVENTION,
+     MacAddress,
+     RowStatus,
+     TruthValue,
+     TimeInterval,
+     TimeStamp,
+     StorageType
+             FROM SNMPv2-TC         -- [RFC2579]
+     OBJECT-GROUP,
+     MODULE-COMPLIANCE
+             FROM SNMPv2-CONF       -- [RFC2580]
+     ifIndex, InterfaceIndexOrZero
+             FROM IF-MIB            -- [RFC2863]
+     InetAddressType,
+     InetAddress
+             FROM INET-ADDRESS-MIB  -- [RFC4001]
+     IANAifType
+             FROM IANAifType-MIB;   -- [IANA]
+
+docsIfMib MODULE-IDENTITY
+     LAST-UPDATED    "200605240000Z" -- May 24, 2006
+     ORGANIZATION    "IETF IPCDN Working Group"
+     CONTACT-INFO
+         "        David Raftus
+          Postal: ATI Technologies Inc.
+                  340 Terry Fox Drive, Suite 202
+                  Ottawa Ontario
+                  Canada
+          Phone:  +1 613 592 1052 ext.222
+          E-mail: david.raftus@ati.com
+
+                  Eduardo Cardona
+          Postal: Cable Television Laboratories, Inc.
+                  858 Coal Creek Circle
+                  Louisville, CO 80027-9750
+                  U.S.A.
+          Phone:  Tel:    +1 303 661 9100
+                  Fax:    +1 303 661 9199
+          E-mail: e.cardona@cablelabs.com;mibs@cablelabs.com
+
+          IETF IPCDN Working Group
+          General Discussion: ipcdn@ietf.org
+          Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+          Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+          Co-chairs: Richard Woundy, Richard_Woundy@cable.comcast.com
+                     Jean-Francois Mule, jf.mule@cablelabs.com"
+     DESCRIPTION
+         "This is the MIB Module for DOCSIS 2.0-compliant Radio
+          Frequency (RF) interfaces in Cable Modems and
+          Cable Modem Termination Systems.
+
+          Copyright (C) The Internet Society (2006).  This
+          version of this MIB module is part of RFC 4546; see
+          the RFC itself for full legal notices."
+
+     REVISION        "200605240000Z"
+     DESCRIPTION
+         "Revision of the IETF RF MIB module for DOCSIS 2.0.
+          This version published as RFC 4546.
+          This MIB module revision includes the following
+          among others:
+          Usage of ifType (205) for upstream logical channels.
+          Addition of downstream and upstream utilization
+          counters.
+          Additional statistics per upstream interface.
+          Upstream channel offline configuration mechanism.
+          Added MIB support for new DOCSIS 2.0 modulation
+          attributes.
+          Euro-DOCSIS downstream interleave values.
+          Adjustments to RFC 2670 definitions based on
+          the MIB review guidelines from the IETF
+
+          Operations and Management Area (OPS)."
+
+     REVISION "199908190000Z"
+     DESCRIPTION
+         "Initial version, published as RFC 2670.
+          Modified by Mike St. Johns to fix problems identified by
+          the first pass of the MIB doctor.  Of special note,
+          docsIfRangingResp and docsIfCmtsInsertionInterval were
+          obsoleted and replaced by other objects with the same
+          functionality, but with more appropriate syntax."
+     ::= { transmission 127 }
+
+-- Textual Conventions
+
+TenthdBmV ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d-1"
+     STATUS       current
+     DESCRIPTION
+         "This data type represents power levels that are normally
+          expressed in dBmV.  Units are in tenths of a dBmV;
+          for example, 5.1 dBmV will be represented as 51."
+     SYNTAX       Integer32
+
+TenthdB ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d-1"
+     STATUS       current
+     DESCRIPTION
+         "This data type represents power levels that are normally
+          expressed in dB.  Units are in tenths of a dB;
+          for example, 5.1 dB will be represented as 51."
+     SYNTAX       Integer32
+
+DocsisVersion ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Indicates the DOCSIS Radio Frequency specification being
+         referenced.
+         'docsis10' indicates DOCSIS 1.0.
+         'docsis11' indicates DOCSIS 1.1.
+         'docsis20' indicates DOCSIS 2.0."
+    SYNTAX        INTEGER {
+         docsis10 (1),
+         docsis11 (2),
+         docsis20 (3)
+    }
+
+DocsisQosVersion ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "Indicates the referenced quality-of-service
+         level.
+         'docsis10 refers to DOCSIS 1.0 Class of
+         Service queuing services, and 'docsis11' refers
+         to DOCSIS 1.1 Quality of Service."
+    SYNTAX        INTEGER {
+        docsis10 (1),
+        docsis11 (2)
+    }
+
+DocsisUpstreamType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+         "Indicates the DOCSIS Upstream Channel Type.
+          'unknown' means information not available.
+          'tdma' is related to TDMA, Time Division
+          Multiple Access; 'atdma' is related to A-TDMA,
+          Advanced Time Division Multiple Access,
+          'scdma' is related to S-CDMA, Synchronous
+          Code Division Multiple Access.
+          'tdmaAndAtdma is related to simultaneous support of
+          TDMA and A-TDMA modes."
+    SYNTAX          INTEGER {
+        unknown(0),
+        tdma(1),
+        atdma(2),
+        scdma(3),
+        tdmaAndAtdma(4)
+    }
+
+ DocsEqualizerData ::= TEXTUAL-CONVENTION
+      STATUS       current
+      DESCRIPTION
+          "This data type represents the equalizer data
+           as measured at the receiver interface.
+           The format of the equalizer follows the structure of the
+           Transmit Equalization Adjust RNG-RSP TLV of DOCSIS RFI
+           v2.0 :
+           1 byte Main tap location 1..(n + m)
+           1 byte Number of forward taps per symbol
+           1 byte Number of forward taps: n
+           1 byte Number of reverse taps: m
+
+           Following are the equalizer coefficients:
+           First, forward taps coefficients:
+           2 bytes F1 (real),  2 bytes  F1 (imag)
+
+           ...
+           2 bytes Fn (real),  2 bytes  Fn (imag)
+
+           Then, reverse taps coefficients:
+           2 bytes D1 (real),  2 bytes  D1 (imag)
+           ...
+
+           2 bytes Dm (real),  2 bytes  Dm (imag)
+
+           The equalizer coefficients are considered signed 16-bit
+           integers in the range from -32768 (0x8000) to 32767
+           (0x7FFF).
+
+           DOCSIS specifications require up to a maximum of
+           64 equalizer taps (n + m); therefore, this object size
+            can get up 260 bytes (4 + 4x64).
+           The minimum object size (other than zero) for a t-spaced
+           tap with a minimum of 8 symbols will be 36 (4 + 4x8)."
+      REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 8-23."
+      SYNTAX       OCTET STRING(SIZE (0 | 36..260))
+
+docsIfMibObjects  OBJECT IDENTIFIER ::= { docsIfMib 1 }
+docsIfBaseObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 1 }
+docsIfCmObjects   OBJECT IDENTIFIER ::= { docsIfMibObjects 2 }
+docsIfCmtsObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 3 }
+
+--
+-- BASE GROUP
+--
+
+--
+-- The following table is implemented on both the Cable Modem
+-- and the Cable Modem Termination System.  This table is
+-- read only for the CM.
+--
+
+docsIfDownstreamChannelTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfDownstreamChannelEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "This table describes the attributes of downstream
+          channels (frequency bands)."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-16, and 6-17."
+     ::= { docsIfBaseObjects 1 }
+
+docsIfDownstreamChannelEntry OBJECT-TYPE
+     SYNTAX      DocsIfDownstreamChannelEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An entry provides a list of attributes for a single
+          downstream channel.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableDownstream(128)."
+     INDEX { ifIndex }
+     ::= { docsIfDownstreamChannelTable 1 }
+
+DocsIfDownstreamChannelEntry ::= SEQUENCE {
+         docsIfDownChannelId               Integer32,
+         docsIfDownChannelFrequency        Integer32,
+         docsIfDownChannelWidth            Integer32,
+         docsIfDownChannelModulation       INTEGER,
+         docsIfDownChannelInterleave       INTEGER,
+         docsIfDownChannelPower            TenthdBmV,
+         docsIfDownChannelAnnex            INTEGER,
+         docsIfDownChannelStorageType      StorageType
+     }
+
+docsIfDownChannelId OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The Cable Modem Termination System identification of the
+          downstream channel within this particular MAC interface.
+          if the interface is down, the object returns the most
+          current value.  If the downstream channel ID is unknown,
+          this object returns a value of 0."
+     ::= { docsIfDownstreamChannelEntry 1 }
+
+docsIfDownChannelFrequency OBJECT-TYPE
+     SYNTAX      Integer32 (0..1000000000)
+     UNITS       "hertz"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The center of the downstream frequency associated with
+          this channel.  This object will return the current tuner
+
+          frequency.  If a CMTS provides IF output, this object
+          will return 0, unless this CMTS is in control of the
+          final downstream frequency.  See the associated
+          compliance object for a description of valid frequencies
+          that may be written to this object."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.3.3."
+     ::= { docsIfDownstreamChannelEntry 2 }
+
+docsIfDownChannelWidth OBJECT-TYPE
+     SYNTAX      Integer32 (0..16000000)
+     UNITS       "hertz"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The bandwidth of this downstream channel.  Most
+          implementations are expected to support a channel width
+          of 6 MHz (North America) and/or 8 MHz (Europe).  See the
+          associated compliance object for a description of the
+          valid channel widths for this object."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 6-17."
+     ::= { docsIfDownstreamChannelEntry 3 }
+
+docsIfDownChannelModulation OBJECT-TYPE
+     SYNTAX      INTEGER {
+         unknown(1),
+         other(2),
+         qam64(3),
+         qam256(4)
+     }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The modulation type associated with this downstream
+          channel.  If the interface is down, this object either
+          returns the configured value (CMTS), the most current
+          value (CM), or the value of unknown(1).  See the
+          associated conformance object for write conditions and
+          limitations.  See the reference for specifics on the
+          modulation profiles implied by qam64 and qam256."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 6-17."
+     ::= { docsIfDownstreamChannelEntry 4 }
+
+docsIfDownChannelInterleave OBJECT-TYPE
+     SYNTAX      INTEGER {
+         unknown(1),
+         other(2),
+         taps8Increment16(3),
+         taps16Increment8(4),
+         taps32Increment4(5),
+         taps64Increment2(6),
+         taps128Increment1(7),
+         taps12increment17(8)
+     }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The Forward Error Correction (FEC) interleaving used
+          for this downstream channel.
+          Values are defined as follows:
+          taps8Increment16(3):   protection 5.9/4.1 usec,
+                                 latency .22/.15 msec
+          taps16Increment8(4):   protection 12/8.2 usec,
+                                 latency .48/.33 msec
+          taps32Increment4(5):   protection 24/16 usec,
+                                 latency .98/.68 msec
+          taps64Increment2(6):   protection 47/33 usec,
+                                 latency 2/1.4 msec
+          taps128Increment1(7):  protection 95/66 usec,
+                                 latency 4/2.8 msec
+          taps12increment17(8):  protection 18/14 usec,
+                                 latency 0.43/0.32 msec
+
+         The value 'taps12increment17' is supported by EuroDOCSIS
+         cable systems only, and the others by DOCSIS cable systems.
+
+          If the interface is down, this object either returns
+          the configured value (CMTS), the most current value (CM),
+          or the value of unknown(1).
+          The value of other(2) is returned if the interleave
+          is known but not defined in the above list.
+          See the associated conformance object for write
+          conditions and limitations.  See the reference for the FEC
+          configuration described by the setting of this object."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 6-15."
+     ::= { docsIfDownstreamChannelEntry 5 }
+
+docsIfDownChannelPower OBJECT-TYPE
+     SYNTAX      TenthdBmV
+     UNITS       "dBmV"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "At the CMTS, the operational transmit power.  At the CM,
+          the received power level.
+          If the interface is down, this object either returns
+          the configured value (CMTS), the most current value (CM)
+          or the value of 0.  See the associated conformance object
+          for write conditions and limitations.  See the reference
+          for recommended and required power levels."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-16, 6-17."
+     ::= { docsIfDownstreamChannelEntry 6 }
+
+docsIfDownChannelAnnex OBJECT-TYPE
+     SYNTAX      INTEGER {
+         unknown(1),
+         other(2),
+         annexA(3),
+         annexB(4),
+         annexC(5)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The value of this object indicates the conformance of
+          the implementation to important regional cable standards.
+          annexA : Annex A from ITU-T J.83 is used.
+                   (equivalent to EN 300 429)
+          annexB : Annex B from ITU-T J.83 is used.
+          annexC : Annex C from ITU-T J.83 is used."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.3.1, and H.3.1."
+     ::= { docsIfDownstreamChannelEntry 7 }
+
+docsIfDownChannelStorageType OBJECT-TYPE
+     SYNTAX       StorageType
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The storage type for this conceptual row.
+          Entries with this object set to permanent(4)
+          do not require write operations for read-write
+          objects."
+     ::= { docsIfDownstreamChannelEntry 8 }
+
+--
+-- The following table is implemented on both the CM and the CMTS.
+-- For the CM, only attached channels appear in the table.  For the
+-- CM, this table is read-only as well.
+--
+
+docsIfUpstreamChannelTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfUpstreamChannelEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "This table describes the attributes of attached upstream
+          channels."
+     ::= { docsIfBaseObjects 2 }
+
+docsIfUpstreamChannelEntry OBJECT-TYPE
+     SYNTAX      DocsIfUpstreamChannelEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "List of attributes for a single upstream channel.  For
+          DOCSIS 2.0 CMTSs, an entry in this table exists for
+          each ifEntry with an ifType of docsCableUpstreamChannel
+          (205).
+          For DOCSIS 1.x CM/CMTSs and DOCSIS 2.0 CMs, an entry in
+          this table exists for each ifEntry with an ifType of
+          docsCableUpstream (129).
+
+          For DOCSIS 2.0 CMTSs, two classes of interfaces can be
+          defined for this table:
+           o Upstream Physical Interfaces: The traditional DOCSIS
+             1.x CMTS upstream interface ifType 129 and the DOCSIS
+             2.0 ifType 205 that are functional.  In other words,
+             interfaces that represent upstream receivers within
+             an RF MAC interface.
+             Entries of physical interfaces are exposed to the
+             management interface with their corresponding
+             ifStack hierarchy and are not administratively
+             created by this table.
+
+           o Upstream Temporary Interfaces: A fictitious
+             interface created for the purpose of manipulating
+             physical interface parameters offline, then
+             validating prior to updating the target physical
+             interface.
+
+          In case of a reinitialization of the managed system,
+          physical interfaces values persist while the temporary
+          interfaces are not recreated.
+
+          This mechanism helps to minimize service disruptions
+          originating in situations where a group of interface
+          parameter values need to be consistent with each other
+          in SET operations.  A temporary buffer
+          (temporary interface) is provided to allow the CMTS
+          to validate the parameters offline."
+     INDEX { ifIndex }
+     ::= { docsIfUpstreamChannelTable 1 }
+
+DocsIfUpstreamChannelEntry ::= SEQUENCE {
+         docsIfUpChannelId                     Integer32,
+         docsIfUpChannelFrequency              Integer32,
+         docsIfUpChannelWidth                  Integer32,
+         docsIfUpChannelModulationProfile      Unsigned32,
+         docsIfUpChannelSlotSize               Unsigned32,
+         docsIfUpChannelTxTimingOffset         Unsigned32,
+         docsIfUpChannelRangingBackoffStart    Integer32,
+         docsIfUpChannelRangingBackoffEnd      Integer32,
+         docsIfUpChannelTxBackoffStart         Integer32,
+         docsIfUpChannelTxBackoffEnd           Integer32,
+         docsIfUpChannelScdmaActiveCodes       Unsigned32,
+         docsIfUpChannelScdmaCodesPerSlot      Integer32,
+         docsIfUpChannelScdmaFrameSize         Unsigned32,
+         docsIfUpChannelScdmaHoppingSeed       Unsigned32,
+         docsIfUpChannelType                   DocsisUpstreamType,
+         docsIfUpChannelCloneFrom              InterfaceIndexOrZero,
+         docsIfUpChannelUpdate                 TruthValue,
+         docsIfUpChannelStatus                 RowStatus,
+         docsIfUpChannelPreEqEnable            TruthValue
+     }
+
+docsIfUpChannelId OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The CMTS identification of the upstream channel."
+     ::= { docsIfUpstreamChannelEntry 1 }
+
+docsIfUpChannelFrequency OBJECT-TYPE
+     SYNTAX      Integer32 (0..1000000000)
+     UNITS       "hertz"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The center of the frequency band associated with this
+          upstream interface.  This object returns 0 if the frequency
+          is undefined or unknown.  Minimum permitted upstream
+          frequency is 5,000,000 Hz for current technology.  See
+          the associated conformance object for write conditions
+          and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 4-2."
+     ::= { docsIfUpstreamChannelEntry 2 }
+
+docsIfUpChannelWidth OBJECT-TYPE
+     SYNTAX      Integer32 (0..64000000)
+     UNITS       "hertz"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The bandwidth of this upstream interface.  This object
+          returns 0 if the interface width is undefined or unknown.
+          Minimum permitted interface width is currently 200,000 Hz.
+          See the associated conformance object for write conditions
+          and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 6-5."
+     ::= { docsIfUpstreamChannelEntry 3 }
+
+docsIfUpChannelModulationProfile OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "An entry identical to the docsIfModIndex in the
+          docsIfCmtsModulationTable that describes this channel.
+          This channel is further instantiated there by a grouping
+          of interval usage codes (IUCs) that, together, fully
+          describe the channel modulation.  This object returns 0 if
+          the docsIfCmtsModulationTable entry does not exist or is
+          empty.  See the associated conformance object for write
+          conditions and limitations.
+
+          Setting this object returns an 'inconsistentValue'
+          error if the following conditions are not satisfied:
+          1. All the IUC entries in the selected modulation profile
+          MUST have the same value of docsIfCmtsModChannelType.
+          2. All of the Modulation parameters in the selected
+          modulation profile MUST be consistent with the other
+          parameters in this docsIfUpstreamChannelEntry."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 8-19."
+     ::= { docsIfUpstreamChannelEntry 4 }
+
+docsIfUpChannelSlotSize OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "ticks"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Applicable to TDMA and ATDMA channel types only.
+          The number of 6.25 microsecond ticks in each upstream
+          mini-slot.  Returns zero if the value is undefined or
+          unknown or in case of an SCDMA channel.
+          See the associated conformance object for write
+          conditions and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.1.2.4."
+     ::= { docsIfUpstreamChannelEntry 5 }
+
+docsIfUpChannelTxTimingOffset OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "At the CM, a measure of the current round trip time
+          obtained from the ranging offset (initial ranging offset +
+          ranging offset adjustments).
+          At the CMTS, the maximum of timing offset, among all the
+          CMs that are/were present on the channel, taking into
+          account all ( initial + periodic ) timing offset
+          corrections that were sent for each of the CMs.  Generally,
+          these measurements are positive, but if the measurements
+          are negative, the value of this object is zero.  Used for
+          timing of CM upstream transmissions to ensure synchronized
+          arrivals at the CMTS.
+          Units are one 64th fraction of 6.25 microseconds."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.19."
+     ::= { docsIfUpstreamChannelEntry 6 }
+
+docsIfUpChannelRangingBackoffStart OBJECT-TYPE
+     SYNTAX      Integer32 (0..16)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The initial random backoff window to use when retrying
+          Ranging Requests.  Expressed as a power of 2.  A value of
+          16 at the CMTS indicates that a proprietary adaptive retry
+          mechanism is to be used.  See the associated conformance
+          object for write conditions and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 8.3.4, and 9.4."
+     ::= { docsIfUpstreamChannelEntry 7 }
+
+docsIfUpChannelRangingBackoffEnd OBJECT-TYPE
+     SYNTAX      Integer32 (0..16)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The final random backoff window to use when retrying
+          Ranging Requests.  Expressed as a power of 2.  A value of
+          16 at the CMTS indicates that a proprietary adaptive retry
+          mechanism is to be used.  See the associated conformance
+          object for write conditions and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.4, and 9.4."
+     ::= { docsIfUpstreamChannelEntry 8 }
+
+docsIfUpChannelTxBackoffStart OBJECT-TYPE
+     SYNTAX      Integer32 (0..16)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The initial random backoff window to use when retrying
+          transmissions.  Expressed as a power of 2.  A value of 16
+          at the CMTS indicates that a proprietary adaptive retry
+          mechanism is to be used.  See the associated conformance
+          object for write conditions and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.4, and 9.4."
+     ::= { docsIfUpstreamChannelEntry 9 }
+
+docsIfUpChannelTxBackoffEnd OBJECT-TYPE
+     SYNTAX      Integer32 (0..16)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The final random backoff window to use when retrying
+          transmissions.  Expressed as a power of 2.  A value of 16
+          at the CMTS indicates that a proprietary adaptive retry
+          mechanism is to be used.  See the associated conformance
+          object for write conditions and limitations."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.4, and 9.4."
+     ::= { docsIfUpstreamChannelEntry 10 }
+
+docsIfUpChannelScdmaActiveCodes OBJECT-TYPE
+     SYNTAX     Unsigned32 (0|64..66|68..70|72|74..78|80..82|84..88
+                             |90..96|98..100|102|104..106|108
+                             |110..112|114..126|128)
+     MAX-ACCESS read-create
+     STATUS     current
+     DESCRIPTION
+         "Applicable for SCDMA channel types only.
+          Number of active codes.  Returns zero for
+          Non-SCDMA channel types.  Note that legal
+          values from 64..128 MUST be non-prime."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.11.2.1."
+     ::= { docsIfUpstreamChannelEntry 11 }
+
+docsIfUpChannelScdmaCodesPerSlot OBJECT-TYPE
+     SYNTAX      Integer32(0 | 2..32)
+     UNITS       "codesperMinislots"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Applicable for SCDMA channel types only.
+          The number of SCDMA codes per mini-slot.
+          Returns zero if the value is undefined or unknown or in
+
+          case of a TDMA or ATDMA channel."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.11.2.1."
+     ::= { docsIfUpstreamChannelEntry 12 }
+
+docsIfUpChannelScdmaFrameSize OBJECT-TYPE
+     SYNTAX      Unsigned32 (0..32)
+     UNITS       "spreadIntervals"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Applicable for SCDMA channel types only.
+          SCDMA Frame size in units of spreading intervals.
+          This value returns zero for non-SCDMA Profiles."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.12."
+     ::= { docsIfUpstreamChannelEntry 13 }
+
+docsIfUpChannelScdmaHoppingSeed OBJECT-TYPE
+     SYNTAX     Unsigned32 (0..32767)
+     MAX-ACCESS read-create
+     STATUS     current
+     DESCRIPTION
+         "Applicable for SCDMA channel types only.
+          15-bit seed used for code hopping sequence initialization.
+          Returns zero for non-SCDMA channel types.
+          Setting this value to a value different than zero for
+          non-SCDMA channel types returns the error 'wrongValue'."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.14.1."
+     ::= { docsIfUpstreamChannelEntry 14 }
+
+docsIfUpChannelType OBJECT-TYPE
+     SYNTAX      DocsisUpstreamType
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Reflects the Upstream channel type.
+          This object returns the value of docsIfCmtsModChannelType
+          for the modulation profile selected in
+          docsIfUpChannelModulationProfile for this row."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.1."
+     ::= { docsIfUpstreamChannelEntry 15 }
+
+docsIfUpChannelCloneFrom OBJECT-TYPE
+     SYNTAX      InterfaceIndexOrZero
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "This object contains the ifIndex value of the physical
+          interface row entry whose parameters are to be adjusted.
+
+          Upon setting this object to the ifIndex value of a
+          physical interface, the following interface objects values
+          are copied to this entry:
+          docsIfUpChannelFrequency,
+          docsIfUpChannelWidth,
+          docsIfUpChannelModulationProfile,
+          docsIfUpChannelSlotSize,
+          docsIfUpChannelRangingBackoffStart,
+          docsIfUpChannelRangingBackoffEnd,
+          docsIfUpChannelTxBackoffStart,
+          docsIfUpChannelTxBackoffEnd,
+          docsIfUpChannelScdmaActiveCodes,
+          docsIfUpChannelScdmaCodesPerSlot,
+          docsIfUpChannelScdmaFrameSize,
+          docsIfUpChannelScdmaHoppingSeed,
+          docsIfUpChannelType, and
+          docsIfUpChannelPreEqEnable
+          Setting this object to the value of a non-existent or
+          a temporary upstream interface returns the error
+          'wrongValue'.
+          This object MUST contain a value of zero for physical
+          interfaces entries.
+          Setting this object in row entries that correspond to
+          physical interfaces returns the error 'wrongValue'."
+     ::= { docsIfUpstreamChannelEntry 16 }
+
+docsIfUpChannelUpdate OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Used to perform the copy of adjusted parameters from the
+          temporary interface entry to the physical interface
+          indicated by the docsIfUpChannelCloneFrom object.  The
+          transfer is initiated through an SNMP SET to 'true' of
+
+          this object.
+          A SET to 'true' fails and returns error 'commitFailed'
+          if docsIfUpChannelStatus value is 'notInService', which
+          means that the interface parameters values are not
+          compatible with each other or have not been validated yet.
+          Reading this object always returns 'false'."
+     ::= { docsIfUpstreamChannelEntry 17 }
+
+docsIfUpChannelStatus OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "This object is only used for the creation of a temporary
+          upstream row with the purpose of updating the parameters
+          of a physical upstream channel entry.
+
+          The following restrictions apply to this object:
+          1. This object is not writable for physical interfaces.
+          2. Temporary interface entries are only created by a SET
+             of this object to createandWait(5).
+          3. ifAdminStatus from the Interface MIB RFC 2863 is used
+             to take a physical upstream channel offline, to be
+             consistent with DOCSIS 1.x operation, as indicated in
+             RFC 2670.
+             In addition,
+              o ifAdminStatus 'down' is reflected in this object
+                as 'notInService'.
+              o ifOperStatus 'down' while ifAdminStatus 'up' is
+                reflected in this object as 'notInservice'.
+          4. Temporary created rows MUST be set to 'active' with
+             the purpose of validating upstream parameter
+             consistency prior to transferring the parameters to the
+             physical interface.
+
+          Below is a mandatory procedure for adjusting the values
+          of a physical interface:
+          1. Create a temporary interface entry through an SNMP SET
+             using 'createAndWait'.  At this point, the RowStatus
+             reports 'notReady'.
+             The Manager entity uses an ifIndex value outside the
+             operational range of the physical interfaces for the
+             creation of a temporary interface.
+          2. Set the docsIfUpChannelCloneFrom object to the ifIndex
+             value of the physical row to update.  Now
+             docsIfUpChannelStatus reports 'notInService'.
+          3. Change the upstream parameters to the desired values
+             in the temporary row.
+
+          4. Validate that all parameters are consistent by setting
+             docsIfUpChannelStatus to 'active'.  A failure to set the
+             RowStatus to 'active' returns the error 'commitFailed',
+             which means the parameters are not compatible with the
+             target physical interface.
+          5. With docsIfUpChannelStatus 'active', transfer the
+             parameters to the target physical interface by setting
+             the object docsIfUpChannelUpdate to 'true'.
+          6. Delete the temporary row by setting
+             docsIfUpChannelStatus to 'destroy'."
+     ::= { docsIfUpstreamChannelEntry 18 }
+
+docsIfUpChannelPreEqEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "At the CMTS, this object is used to enable or disable
+          pre-equalization on the upstream channel represented by
+          this table instance.  At the CM, this object is read-only
+          and reflects the status of pre-equalization as represented
+          in the RNG-RSP.  Pre-equalization is considered enabled at
+          the CM if a RNG-RSP with pre-equalization data has been
+          received at least once since the last mac
+          reinitialization."
+     DEFVAL {false}
+     ::= { docsIfUpstreamChannelEntry 19 }
+
+-- The following table describes the attributes of each class of
+-- service.  The entries in this table are referenced from the
+-- docsIfServiceEntries.  They exist as a separate table in order to
+-- reduce redundant information in docsIfServiceTable.
+--
+-- This table is implemented at both the CM and the CMTS.
+-- The CM need only maintain entries for the classes of service
+-- referenced by its docsIfCmServiceTable.
+--
+
+docsIfQosProfileTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfQosProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes for each class of service."
+     ::= { docsIfBaseObjects 3 }
+
+docsIfQosProfileEntry OBJECT-TYPE
+     SYNTAX      DocsIfQosProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes for a single class of service.
+          If implemented as read-create in the Cable Modem
+          Termination System, creation of entries in this table is
+          controlled by the value of
+          docsIfCmtsQosProfilePermissions.
+
+          If implemented as read-only, entries are created based
+          on information in REG-REQ MAC messages received from
+          cable modems (for Cable Modem Termination System), or
+          based on information extracted from the TFTP option file
+          (for Cable Modem).
+          In the Cable Modem Termination System, read-only entries
+          are removed if no longer referenced by
+          docsIfCmtsServiceTable.
+
+          An entry in this table MUST not be removed while it is
+          referenced by an entry in docsIfCmServiceTable (Cable
+          Modem) or docsIfCmtsServiceTable (Cable Modem Termination
+          System).
+
+          An entry in this table SHOULD NOT be changeable while
+          it is referenced by an entry in docsIfCmtsServiceTable.
+
+          If this table is created automatically, there SHOULD only
+          be a single entry for each Class of Service.  Multiple
+          entries with the same Class of Service parameters are NOT
+          RECOMMENDED."
+     INDEX { docsIfQosProfIndex }
+     ::= { docsIfQosProfileTable 1 }
+
+DocsIfQosProfileEntry ::= SEQUENCE {
+         docsIfQosProfIndex                Integer32,
+         docsIfQosProfPriority             Integer32,
+         docsIfQosProfMaxUpBandwidth       Integer32,
+         docsIfQosProfGuarUpBandwidth      Integer32,
+         docsIfQosProfMaxDownBandwidth     Integer32,
+         docsIfQosProfMaxTxBurst           Integer32,  -- deprecated
+         docsIfQosProfBaselinePrivacy      TruthValue,
+         docsIfQosProfStatus               RowStatus,
+         docsIfQosProfMaxTransmitBurst     Integer32,
+         docsIfQosProfStorageType          StorageType
+     }
+
+docsIfQosProfIndex OBJECT-TYPE
+     SYNTAX      Integer32 (1..16383)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "The index value that uniquely identifies an entry
+          in the docsIfQosProfileTable."
+     ::= { docsIfQosProfileEntry 1 }
+
+docsIfQosProfPriority OBJECT-TYPE
+     SYNTAX      Integer32 (0..7)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "A relative priority assigned to this service when
+          allocating bandwidth.  Zero indicates lowest priority
+          and seven indicates highest priority.
+          Interpretation of priority is device-specific.
+          MUST NOT be changed while this row is active."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex C.1.1.4."
+     DEFVAL { 0 }
+     ::= { docsIfQosProfileEntry 2 }
+
+docsIfQosProfMaxUpBandwidth OBJECT-TYPE
+     SYNTAX      Integer32 (0..100000000)
+     UNITS "bits per second"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The maximum upstream bandwidth, in bits per second,
+          allowed for a service with this service class.
+          Zero if there is no restriction of upstream bandwidth.
+          MUST NOT be changed while this row is active."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex C.1.1.4."
+     DEFVAL { 0 }
+     ::= { docsIfQosProfileEntry 3 }
+
+docsIfQosProfGuarUpBandwidth OBJECT-TYPE
+     SYNTAX      Integer32 (0..100000000)
+     UNITS "bits per second"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Minimum guaranteed upstream bandwidth, in bits per second,
+          allowed for a service with this service class.
+          MUST NOT be changed while this row is active."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex C.1.1.4."
+     DEFVAL { 0 }
+     ::= { docsIfQosProfileEntry 4 }
+
+docsIfQosProfMaxDownBandwidth OBJECT-TYPE
+     SYNTAX      Integer32 (0..100000000)
+     UNITS "bits per second"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The maximum downstream bandwidth, in bits per second,
+          allowed for a service with this service class.
+          Zero if there is no restriction of downstream bandwidth.
+          MUST NOT be changed while this row is active."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex C.1.1.4."
+     DEFVAL { 0 }
+     ::= { docsIfQosProfileEntry 5 }
+
+docsIfQosProfMaxTxBurst OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     UNITS "mini-slots"
+     MAX-ACCESS  read-create
+     STATUS      deprecated
+     DESCRIPTION
+         "The maximum number of mini-slots that may be requested
+          for a single upstream transmission.
+          A value of zero means there is no limit.
+          MUST NOT be changed while this row is active.
+          This object has been deprecated and replaced by
+          docsIfQosProfMaxTransmitBurst, to fix a mismatch
+          of the units and value range with respect to the DOCSIS
+          Maximum Upstream Channel Transmit Burst Configuration
+          Setting."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          C.1.1.4."
+     DEFVAL { 0 }
+     ::= { docsIfQosProfileEntry 6 }
+
+docsIfQosProfBaselinePrivacy OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Indicates whether Baseline Privacy is enabled for this
+          service class.
+          MUST NOT be changed while this row is active."
+     DEFVAL { false }
+     ::= { docsIfQosProfileEntry 7 }
+
+docsIfQosProfStatus OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "This is object is used to create or delete rows in
+          this table.  This object MUST NOT be changed from active
+          while the row is referenced by any entry in either
+          docsIfCmServiceTable (on the CM) or
+          docsIfCmtsServiceTable (on the CMTS)."
+     ::= { docsIfQosProfileEntry 8 }
+
+docsIfQosProfMaxTransmitBurst OBJECT-TYPE
+     SYNTAX      Integer32 (0..65535)
+     UNITS       "bytes"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The maximum number of bytes that may be requested for a
+          single upstream transmission.  A value of zero means there
+          is no limit.  Note: This value does not include any
+          physical layer overhead.
+          MUST NOT be changed while this row is active."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex C.1.1.4."
+     DEFVAL { 0 }
+     ::= { docsIfQosProfileEntry 9 }
+
+docsIfQosProfStorageType OBJECT-TYPE
+     SYNTAX       StorageType
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The storage type for this conceptual row.
+          Entries with this object set to permanent(4)
+
+          do not require write operations for writable
+          objects."
+     ::= { docsIfQosProfileEntry 10 }
+
+docsIfSignalQualityTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfSignalQualityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "At the CM, describes the PHY signal quality of downstream
+          channels.  At the CMTS, this object describes the PHY
+          signal quality of upstream channels.  At the CMTS, this
+          table MAY exclude contention intervals."
+     ::= { docsIfBaseObjects 4 }
+
+docsIfSignalQualityEntry OBJECT-TYPE
+     SYNTAX      DocsIfSignalQualityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "At the CM, this object describes the PHY characteristics of
+          a downstream channel.  At the CMTS, it describes the PHY
+          signal quality of an upstream channel.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableDownstream(128) for Cable Modems.
+          For DOCSIS 1.1 Cable Modem Termination Systems, an entry
+          exists for each ifEntry with an ifType of
+          docsCableUpstream (129).
+          For DOCSIS 2.0 Cable Modem Termination Systems, an entry
+          exists for each ifEntry with an ifType of
+          docsCableUpstreamChannel (205)."
+     INDEX { ifIndex }
+     ::= { docsIfSignalQualityTable 1 }
+
+DocsIfSignalQualityEntry ::= SEQUENCE {
+         docsIfSigQIncludesContention  TruthValue,
+         docsIfSigQUnerroreds          Counter32,
+         docsIfSigQCorrecteds          Counter32,
+         docsIfSigQUncorrectables      Counter32,
+         docsIfSigQSignalNoise         TenthdB,
+         docsIfSigQMicroreflections    Integer32,
+         docsIfSigQEqualizationData    DocsEqualizerData,
+         docsIfSigQExtUnerroreds       Counter64,
+         docsIfSigQExtCorrecteds       Counter64,
+         docsIfSigQExtUncorrectables   Counter64
+     }
+
+docsIfSigQIncludesContention OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "true(1) if this CMTS includes contention intervals in
+          the counters in this table.  Always false(2) for CMs."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4.1"
+     ::= { docsIfSignalQualityEntry 1 }
+
+docsIfSigQUnerroreds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received on this channel without error.
+          This includes all codewords, whether or not they
+          were part of frames destined for this device.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.2.4, and 6.3.6."
+     ::= { docsIfSignalQualityEntry 2 }
+
+docsIfSigQCorrecteds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received on this channel with correctable
+          errors.  This includes all codewords, whether or not
+          they were part of frames destined for this device.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.2.4, and 6.3.6."
+     ::= { docsIfSignalQualityEntry 3 }
+
+docsIfSigQUncorrectables OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received on this channel with uncorrectable
+          errors.  This includes all codewords, whether or not
+          they were part of frames destined for this device.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.2.4, and 6.3.6."
+     ::= { docsIfSignalQualityEntry 4 }
+
+docsIfSigQSignalNoise OBJECT-TYPE
+     SYNTAX      TenthdB
+     UNITS       "TenthdB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Signal/Noise ratio as perceived for this channel.
+          At the CM, this object  describes the Signal/Noise of the
+          downstream channel.  At the CMTS, it describes the
+          average Signal/Noise of the upstream channel."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 4-1 and 4-2"
+     ::= { docsIfSignalQualityEntry 5 }
+
+docsIfSigQMicroreflections OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     UNITS       "-dBc"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Microreflections, including in-channel response
+          as perceived on this interface, measured in dBc below
+          the signal level.
+          This object is not assumed to return an absolutely
+          accurate value, but it gives a rough indication
+
+          of microreflections received on this interface.
+          It is up to the implementer to provide information
+          as accurately as possible."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 4-1 and 4-2"
+     ::= { docsIfSignalQualityEntry 6 }
+
+docsIfSigQEqualizationData OBJECT-TYPE
+        SYNTAX      DocsEqualizerData
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "At the CM, this object returns the equalization data for
+             the downstream channel.
+
+             At the CMTS, this object is not applicable and is not
+             instantiated.  Note that previous CMTS implementations
+             may instantiate this object in two ways:
+             - An equalization value indicating an equalization
+               average for the upstream channel.  Those values have
+               vendor-dependent interpretations.
+             - Return a zero-length OCTET STRING to indicate that
+               the value is unknown or if there is no equalization
+               data available or defined."
+        REFERENCE
+            "DOCSIS Radio Frequency Interface Specification,
+             Figure 6-23."
+        ::= { docsIfSignalQualityEntry 7 }
+
+docsIfSigQExtUnerroreds OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received on this channel without error.
+          This includes all codewords, whether or not they
+          were part of frames destined for this device.
+          This is the 64-bit version of docsIfSigQUnerroreds.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.2.4, and 6.3.6."
+     ::= { docsIfSignalQualityEntry 8 }
+
+docsIfSigQExtCorrecteds OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received on this channel with correctable
+          errors.  This includes all codewords, whether or not
+          they were part of frames destined for this device.
+          This is the 64-bit version of docsIfSigQCorrecteds.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.2.4, and 6.3.6."
+     ::= { docsIfSignalQualityEntry 9 }
+
+docsIfSigQExtUncorrectables OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received on this channel with uncorrectable
+          errors.  This includes all codewords, whether or not
+          they were part of frames destined for this device.
+          This is the 64-bit version of docsIfSigQUncorrectables.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Sections 6.2.4, 6.3.6."
+     ::= { docsIfSignalQualityEntry 10 }
+
+--
+-- DOCSIS Version of the device
+--
+
+docsIfDocsisBaseCapability OBJECT-TYPE
+        SYNTAX      DocsisVersion
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indication of the DOCSIS capability of the device."
+        REFERENCE
+            "Data-Over-Cable Service Interface Specifications: Radio
+             Frequency Interface Specification SP-RFIv2.0-I10-051209,
+             Annex G."
+        ::= { docsIfBaseObjects 5 }
+
+--
+-- CABLE MODEM GROUP
+--
+
+--
+-- The CM MAC Table
+--
+
+docsIfCmMacTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmMacEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes of each CM MAC interface,
+          extending the information available from ifEntry."
+     ::= { docsIfCmObjects 1 }
+
+docsIfCmMacEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmMacEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An entry containing objects describing attributes of
+          each MAC entry, extending the information in ifEntry.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableMaclayer(127)."
+     INDEX { ifIndex }
+     ::= { docsIfCmMacTable 1 }
+
+DocsIfCmMacEntry ::= SEQUENCE {
+         docsIfCmCmtsAddress           MacAddress,
+         docsIfCmCapabilities          BITS,
+         docsIfCmRangingRespTimeout    TimeTicks,
+         docsIfCmRangingTimeout        TimeInterval
+      }
+
+docsIfCmCmtsAddress OBJECT-TYPE
+     SYNTAX      MacAddress
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Identifies the CMTS that is believed to control this MAC
+          domain.  At the CM, this will be the source address from
+          SYNC, MAP, and other MAC-layer messages.  If the CMTS is
+          unknown, returns 00-00-00-00-00-00."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.2.2."
+     ::= { docsIfCmMacEntry 1 }
+
+docsIfCmCapabilities OBJECT-TYPE
+     SYNTAX      BITS {
+         atmCells(0),
+         concatenation(1)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Identifies the capabilities of the MAC implementation
+          at this interface.  Note that packet transmission is
+          always supported.  Therefore, there is no specific bit
+          required to explicitly indicate this capability.
+          Note that BITS objects are encoded most significant bit
+          first.  For example, if bit 1 is set, the value of this
+          object is the octet string '40'H."
+     ::= { docsIfCmMacEntry 2 }
+
+docsIfCmRangingRespTimeout OBJECT-TYPE
+     SYNTAX      TimeTicks
+     MAX-ACCESS  read-write
+     STATUS      obsolete
+     DESCRIPTION
+         "Waiting time for a Ranging Response packet.
+          This object has been obsoleted and replaced by
+          docsIfCmRangingTimeout to correct the typing to
+          TimeInterval."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.1.6."
+     DEFVAL { 20 }
+     ::= { docsIfCmMacEntry 3 }
+
+docsIfCmRangingTimeout OBJECT-TYPE
+     SYNTAX      TimeInterval
+     UNITS       "HundredOfSeconds"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "Waiting time for a Ranging Response packet.
+          This object MUST NOT persist at reinitialization
+          of the managed system."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.1.6, timer T3."
+     DEFVAL { 20 }
+     ::= { docsIfCmMacEntry 4 }
+
+--
+-- CM status table.
+-- This table is implemented only at the CM.
+--
+
+docsIfCmStatusTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "This table maintains a number of status objects
+          and counters for Cable Modems."
+     ::= { docsIfCmObjects 2 }
+
+docsIfCmStatusEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "A set of status objects and counters for a single MAC
+          layer instance in Cable Modem.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableMaclayer(127)."
+     INDEX { ifIndex }
+     ::= { docsIfCmStatusTable 1 }
+
+DocsIfCmStatusEntry ::= SEQUENCE {
+         docsIfCmStatusValue               INTEGER,
+         docsIfCmStatusCode                OCTET STRING,
+         docsIfCmStatusTxPower             TenthdBmV,
+         docsIfCmStatusResets              Counter32,
+         docsIfCmStatusLostSyncs           Counter32,
+         docsIfCmStatusInvalidMaps         Counter32,
+         docsIfCmStatusInvalidUcds         Counter32,
+         docsIfCmStatusInvalidRangingResponses   Counter32,
+         docsIfCmStatusInvalidRegistrationResponses Counter32,
+         docsIfCmStatusT1Timeouts          Counter32,
+         docsIfCmStatusT2Timeouts          Counter32,
+         docsIfCmStatusT3Timeouts          Counter32,
+         docsIfCmStatusT4Timeouts          Counter32,
+         docsIfCmStatusRangingAborteds     Counter32,
+         docsIfCmStatusDocsisOperMode      DocsisQosVersion,
+         docsIfCmStatusModulationType      DocsisUpstreamType,
+         docsIfCmStatusEqualizationData    DocsEqualizerData,
+         docsIfCmStatusUCCs                Counter32,
+         docsIfCmStatusUCCFails            Counter32
+     }
+
+docsIfCmStatusValue OBJECT-TYPE
+     SYNTAX      INTEGER {
+         other(1),
+         notReady(2),
+         notSynchronized(3),
+         phySynchronized(4),
+         usParametersAcquired(5),
+         rangingComplete(6),
+         ipComplete(7),
+         todEstablished(8),
+         securityEstablished(9),
+         paramTransferComplete(10),
+         registrationComplete(11),
+         operational(12),
+         accessDenied(13)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current Cable Modem connectivity state, as specified
+          in the RF Interface Specification.  Interpretations for
+          state values 1-12 are clearly outlined in the SP-RFI
+          reference given below.
+          The state value accessDenied(13) indicates the CMTS has
+          sent a Registration Aborted message to the CM.  The same
+          state is reported as accessDenied(7) by the CMTS object
+          docsIfCmtsCmStatusValue."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 11.2.
+          Data-Over-Cable Service Interface Specifications:
+
+          Operations Support System Interface Specification
+          SP-OSSIv2.0-I09-050812, Section 6.3.4.2."
+     ::= { docsIfCmStatusEntry 1 }
+
+docsIfCmStatusCode OBJECT-TYPE
+     SYNTAX      OCTET STRING (SIZE( 0 | 5 | 6 ))
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Status code for a Cable Modem as defined in the
+          OSSI Specification.  The status code consists
+          of a single character indicating error groups, followed
+          by a two- or three-digit number indicating the status
+          condition, followed by a decimal.
+          An example of a returned value could be 'T101.0'.
+          The zero-length OCTET STRING indicates no status code yet
+          registered."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications:
+          Operations Support System Interface Specification
+          SP-OSSIv2.0-I09-050812, Annex D."
+     ::= { docsIfCmStatusEntry 2 }
+
+docsIfCmStatusTxPower OBJECT-TYPE
+     SYNTAX      TenthdBmV
+     UNITS       "TenthdBmV"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The operational transmit power for the attached upstream
+          channel."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.18."
+     ::= { docsIfCmStatusEntry 3 }
+
+docsIfCmStatusResets OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "resets"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the CM reset or initialized this
+          interface.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmStatusEntry 4 }
+
+docsIfCmStatusLostSyncs OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the CM lost synchronization with
+          the downstream channel.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.2."
+     ::= { docsIfCmStatusEntry 5 }
+
+docsIfCmStatusInvalidMaps OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "maps"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the CM received invalid MAP messages.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.4."
+     ::= { docsIfCmStatusEntry 6 }
+
+docsIfCmStatusInvalidUcds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "messages"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the CM received invalid UCD messages.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.3."
+     ::= { docsIfCmStatusEntry 7 }
+
+docsIfCmStatusInvalidRangingResponses OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "messages"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the CM received invalid ranging response
+          messages.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.6."
+     ::= { docsIfCmStatusEntry 8 }
+
+docsIfCmStatusInvalidRegistrationResponses OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "messages"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the CM received invalid registration
+          response messages.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.8."
+     ::= { docsIfCmStatusEntry 9 }
+
+docsIfCmStatusT1Timeouts OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "timeouts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times counter T1 expired in the CM.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 9-2."
+     ::= { docsIfCmStatusEntry 10 }
+
+docsIfCmStatusT2Timeouts OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "timeouts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times counter T2 expired in the CM.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 9-2."
+     ::= { docsIfCmStatusEntry 11 }
+
+docsIfCmStatusT3Timeouts OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "timeouts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times counter T3 expired in the CM.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 9-2."
+     ::= { docsIfCmStatusEntry 12 }
+
+docsIfCmStatusT4Timeouts OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "timeouts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times counter T4 expired in the CM.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 9-2."
+     ::= { docsIfCmStatusEntry 13 }
+
+docsIfCmStatusRangingAborteds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Number of times the ranging process was aborted
+          by the CMTS.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.3.3."
+     ::= { docsIfCmStatusEntry 14 }
+
+docsIfCmStatusDocsisOperMode OBJECT-TYPE
+     SYNTAX      DocsisQosVersion
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+          "Indication of whether the device has registered using 1.0
+           Class of Service or 1.1 Quality of Service.
+           An unregistered CM SHOULD indicate 'docsis11' for a
+           docsIfDocsisBaseCapability value of DOCSIS 1.1/2.0.  An
+           unregistered CM SHOULD indicate 'docsis10'  for a
+           docsIfDocsisBaseCapability value of DOCSIS 1.0."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex G."
+     ::= { docsIfCmStatusEntry 15 }
+
+docsIfCmStatusModulationType OBJECT-TYPE
+      SYNTAX      DocsisUpstreamType
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Indicates modulation type status currently used by the
+           CM.  Since this object specifically identifies PHY mode,
+           the shared upstream channel type is not permitted."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.1."
+      ::= { docsIfCmStatusEntry 16 }
+
+docsIfCmStatusEqualizationData OBJECT-TYPE
+     SYNTAX      DocsEqualizerData
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Pre-equalization data for this CM after convolution with
+          data indicated in the RNG-RSP.  This data is valid when
+          docsIfUpChannelPreEqEnable is set to true."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 8-23."
+     ::= { docsIfCmStatusEntry 17 }
+
+docsIfCmStatusUCCs OBJECT-TYPE
+     SYNTAX          Counter32
+     UNITS           "attempts"
+     MAX-ACCESS      read-only
+     STATUS          current
+     DESCRIPTION
+         "The number of successful Upstream Channel Change
+          transactions.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmStatusEntry 18 }
+
+docsIfCmStatusUCCFails OBJECT-TYPE
+     SYNTAX          Counter32
+     UNITS           "attempts"
+     MAX-ACCESS      read-only
+     STATUS          current
+     DESCRIPTION
+         "The number of failed Upstream Channel Change
+          transactions.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmStatusEntry 19 }
+
+--
+-- The Cable Modem Service Table
+--
+
+docsIfCmServiceTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmServiceEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes of each upstream service queue
+          on a CM."
+     ::= { docsIfCmObjects 3 }
+
+docsIfCmServiceEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmServiceEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes of an upstream bandwidth service
+          queue.
+          An entry in this table exists for each Service ID.
+          The primary index is an ifIndex with an ifType of
+          docsCableMaclayer(127)."
+     INDEX { ifIndex, docsIfCmServiceId }
+     ::= { docsIfCmServiceTable 1 }
+
+DocsIfCmServiceEntry ::= SEQUENCE {
+         docsIfCmServiceId               Integer32,
+         docsIfCmServiceQosProfile       Integer32,
+         docsIfCmServiceTxSlotsImmed     Counter32,
+         docsIfCmServiceTxSlotsDed       Counter32,
+         docsIfCmServiceTxRetries        Counter32,
+         docsIfCmServiceTxExceededs      Counter32,
+         docsIfCmServiceRqRetries        Counter32,
+         docsIfCmServiceRqExceededs      Counter32,
+         docsIfCmServiceExtTxSlotsImmed  Counter64,
+         docsIfCmServiceExtTxSlotsDed    Counter64
+
+      }
+
+docsIfCmServiceId OBJECT-TYPE
+     SYNTAX      Integer32 (1..16383)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Identifies a service queue for upstream bandwidth.  The
+          attributes of this service queue are shared between the
+          CM and the CMTS.  The CMTS allocates upstream bandwidth
+          to this service queue based on requests from the CM and
+          on the class of service associated with this queue."
+     ::= { docsIfCmServiceEntry 1 }
+
+docsIfCmServiceQosProfile OBJECT-TYPE
+     SYNTAX      Integer32 (0..16383)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The index in docsIfQosProfileTable describing the quality
+          of service attributes associated with this particular
+          service.  If no associated entry in docsIfQosProfileTable
+          exists, this object returns a value of zero."
+     ::= { docsIfCmServiceEntry 2 }
+
+docsIfCmServiceTxSlotsImmed OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of upstream mini-slots that have been used to
+          transmit data PDUs in immediate (contention) mode.  This
+          includes only those PDUs that are presumed to have
+          arrived at the head-end (i.e., those that were explicitly
+          acknowledged).  It does not include retransmission attempts
+          or mini-slots used by requests.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 3 }
+
+docsIfCmServiceTxSlotsDed OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of upstream mini-slots that have been used to
+          transmit data PDUs in dedicated mode (i.e., as a result
+          of a unicast Data Grant).
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 4 }
+
+docsIfCmServiceTxRetries OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of attempts to transmit data PDUs containing
+          requests for acknowledgment that did not result in
+          acknowledgment.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 5 }
+
+docsIfCmServiceTxExceededs OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of data PDU transmission failures due to
+          excessive retries without acknowledgment.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 6 }
+
+docsIfCmServiceRqRetries OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of attempts to transmit bandwidth requests
+          that did not result in acknowledgment.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 7 }
+
+docsIfCmServiceRqExceededs OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of requests for bandwidth that failed due to
+          excessive retries without acknowledgment.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 8 }
+
+docsIfCmServiceExtTxSlotsImmed OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of upstream mini-slots that have been used to
+          transmit data PDUs in immediate (contention) mode.  This
+          includes only those PDUs that are presumed to have
+          arrived at the head-end (i.e., those that were explicitly
+          acknowledged).  It does not include retransmission attempts
+          or mini-slots used by requests.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 9 }
+
+docsIfCmServiceExtTxSlotsDed OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of upstream mini-slots that have been used to
+          transmit data PDUs in dedicated mode (i.e., as a result
+          of a unicast Data Grant).
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.4."
+     ::= { docsIfCmServiceEntry 10 }
+
+--
+-- CMTS GROUP
+--
+
+--
+-- The CMTS MAC Table
+--
+
+docsIfCmtsMacTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsMacEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes of each CMTS MAC interface,
+          extending the information available from ifEntry.
+          Mandatory for all CMTS devices."
+     ::= { docsIfCmtsObjects 1 }
+
+docsIfCmtsMacEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsMacEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An entry containing objects describing attributes of each
+          MAC entry, extending the information in ifEntry.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableMaclayer(127)."
+     INDEX { ifIndex }
+     ::= { docsIfCmtsMacTable 1 }
+
+DocsIfCmtsMacEntry ::= SEQUENCE {
+         docsIfCmtsCapabilities            BITS,
+         docsIfCmtsSyncInterval            Integer32,
+         docsIfCmtsUcdInterval             Integer32,
+         docsIfCmtsMaxServiceIds           Integer32,
+         docsIfCmtsInsertionInterval       TimeTicks,   -- Obsolete
+         docsIfCmtsInvitedRangingAttempts  Integer32,
+         docsIfCmtsInsertInterval          TimeInterval,
+         docsIfCmtsMacStorageType          StorageType
+     }
+
+docsIfCmtsCapabilities OBJECT-TYPE
+     SYNTAX      BITS {
+         atmCells(0),
+         concatenation(1)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Identifies the capabilities of the CMTS MAC
+          implementation at this interface.  Note that packet
+          transmission is always supported.  Therefore, there
+          is no specific bit required to explicitly indicate
+          this capability.
+          Note that BITS objects are encoded most significant bit
+          first.  For example, if bit 1 is set, the value of this
+          object is the octet string '40'H."
+     ::= { docsIfCmtsMacEntry 1 }
+
+docsIfCmtsSyncInterval OBJECT-TYPE
+     SYNTAX      Integer32 (1..200)
+     UNITS       "Milliseconds"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The interval between CMTS transmission of successive SYNC
+          messages at this interface."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.3."
+     ::= { docsIfCmtsMacEntry 2 }
+
+docsIfCmtsUcdInterval OBJECT-TYPE
+     SYNTAX      Integer32 (1..2000)
+     UNITS       "Milliseconds"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The interval between CMTS transmission of successive
+          Upstream Channel Descriptor messages for each upstream
+          channel at this interface."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.3"
+     ::= { docsIfCmtsMacEntry 3 }
+
+docsIfCmtsMaxServiceIds OBJECT-TYPE
+     SYNTAX     Integer32 (1..16383)
+     UNITS      "SIDs"
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+         "The maximum number of service IDs that may be
+          simultaneously active."
+     ::= { docsIfCmtsMacEntry 4 }
+
+docsIfCmtsInsertionInterval OBJECT-TYPE
+     SYNTAX      TimeTicks
+     MAX-ACCESS  read-write
+     STATUS      obsolete
+     DESCRIPTION
+         "The amount of time to elapse between each broadcast
+          initial maintenance grant.  Broadcast initial maintenance
+          grants are used to allow new cable modems to join the
+          network.  Zero indicates that a vendor-specific algorithm
+          is used instead of a fixed time.  The maximum amount of
+
+          time permitted by the specification is 2 seconds.
+          This object has been obsoleted and replaced by
+          docsIfCmtsInsertInterval to fix a SYNTAX typing problem."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex B."
+     ::= { docsIfCmtsMacEntry 5 }
+
+docsIfCmtsInvitedRangingAttempts OBJECT-TYPE
+     SYNTAX      Integer32 (0..1024)
+     UNITS      "attempts"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The maximum number of attempts to make on invitations
+          for ranging requests.  A value of zero means the system
+          SHOULD attempt to range forever."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 9.3.3 and Annex B."
+     ::= { docsIfCmtsMacEntry 6 }
+
+docsIfCmtsInsertInterval OBJECT-TYPE
+     SYNTAX      TimeInterval
+     UNITS       "HundredOfSeconds"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The amount of time to elapse between each broadcast
+          initial maintenance grant.  Broadcast initial maintenance
+          grants are used to allow new cable modems to join the
+          network.  Zero indicates that a vendor-specific algorithm
+          is used instead of a fixed time.  The maximum amount of
+          time permitted by the specification is 2 seconds."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex B."
+     ::= { docsIfCmtsMacEntry 7 }
+
+docsIfCmtsMacStorageType OBJECT-TYPE
+     SYNTAX       StorageType
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The storage type for this conceptual row.
+
+          Entries with this object set to permanent(4)
+          do not require write operations for read-write
+          objects."
+     ::= { docsIfCmtsMacEntry 8 }
+
+--
+--
+-- CMTS status table.
+--
+
+docsIfCmtsStatusTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "For the MAC layer, this group maintains a number of
+          status objects and counters."
+     ::= { docsIfCmtsObjects 2 }
+
+docsIfCmtsStatusEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+        "Status entry for a single MAC layer.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableMaclayer(127)."
+     INDEX { ifIndex }
+     ::= { docsIfCmtsStatusTable 1 }
+
+DocsIfCmtsStatusEntry ::= SEQUENCE {
+         docsIfCmtsStatusInvalidRangeReqs        Counter32,
+         docsIfCmtsStatusRangingAborteds         Counter32,
+         docsIfCmtsStatusInvalidRegReqs          Counter32,
+         docsIfCmtsStatusFailedRegReqs           Counter32,
+         docsIfCmtsStatusInvalidDataReqs         Counter32,
+         docsIfCmtsStatusT5Timeouts              Counter32
+     }
+
+docsIfCmtsStatusInvalidRangeReqs OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "messages"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This object counts invalid RNG-REQ messages received on
+          this interface.
+          Discontinuities in the value of this counter can occur
+
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.5."
+     ::= { docsIfCmtsStatusEntry 1 }
+
+docsIfCmtsStatusRangingAborteds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This object counts ranging attempts that were explicitly
+          aborted by the CMTS.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.6."
+     ::= { docsIfCmtsStatusEntry 2 }
+
+docsIfCmtsStatusInvalidRegReqs OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "messages"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This object counts invalid REG-REQ messages received on
+          this interface; that is, syntax, out of range parameters,
+          or erroneous requests.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.7."
+     ::= { docsIfCmtsStatusEntry 3 }
+
+docsIfCmtsStatusFailedRegReqs OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "attempts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This object counts failed registration attempts.  Included
+          are docsIfCmtsStatusInvalidRegReqs, authentication, and
+          class of service failures.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.3.7."
+     ::= { docsIfCmtsStatusEntry 4 }
+
+docsIfCmtsStatusInvalidDataReqs OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "messages"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This object counts invalid data request messages
+          received on this interface.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsStatusEntry 5 }
+
+docsIfCmtsStatusT5Timeouts OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "timeouts"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This object counts the number of times counter T5
+          expired on this interface.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 9-2."
+     ::= { docsIfCmtsStatusEntry 6 }
+
+--
+-- CM status table (within CMTS).
+-- This table is implemented only at the CMTS.
+-- It contains per-CM status information available in the CMTS.
+--
+
+docsIfCmtsCmStatusTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsCmStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "A set of objects in the CMTS, maintained for each
+          cable modem connected to this CMTS."
+     ::= { docsIfCmtsObjects 3 }
+
+docsIfCmtsCmStatusEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsCmStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Status information for a single cable modem.
+          An entry in this table exists for each cable modem
+          that is connected to the CMTS implementing this table."
+     INDEX { docsIfCmtsCmStatusIndex }
+     ::= { docsIfCmtsCmStatusTable 1 }
+
+DocsIfCmtsCmStatusEntry ::= SEQUENCE {
+         docsIfCmtsCmStatusIndex               Integer32,
+         docsIfCmtsCmStatusMacAddress          MacAddress,
+         docsIfCmtsCmStatusIpAddress        IpAddress, -- deprecated
+         docsIfCmtsCmStatusDownChannelIfIndex  InterfaceIndexOrZero,
+         docsIfCmtsCmStatusUpChannelIfIndex    InterfaceIndexOrZero,
+         docsIfCmtsCmStatusRxPower             TenthdBmV,
+         docsIfCmtsCmStatusTimingOffset        Unsigned32,
+         docsIfCmtsCmStatusEqualizationData    DocsEqualizerData,
+         docsIfCmtsCmStatusValue               INTEGER,
+         docsIfCmtsCmStatusUnerroreds          Counter32,
+         docsIfCmtsCmStatusCorrecteds          Counter32,
+         docsIfCmtsCmStatusUncorrectables      Counter32,
+         docsIfCmtsCmStatusSignalNoise         TenthdB,
+         docsIfCmtsCmStatusMicroreflections    Integer32,
+         docsIfCmtsCmStatusExtUnerroreds       Counter64,
+         docsIfCmtsCmStatusExtCorrecteds       Counter64,
+         docsIfCmtsCmStatusExtUncorrectables   Counter64,
+         docsIfCmtsCmStatusDocsisRegMode       DocsisQosVersion,
+         docsIfCmtsCmStatusModulationType      DocsisUpstreamType,
+         docsIfCmtsCmStatusInetAddressType     InetAddressType,
+         docsIfCmtsCmStatusInetAddress         InetAddress,
+         docsIfCmtsCmStatusValueLastUpdate     TimeStamp,
+         docsIfCmtsCmStatusHighResolutionTimingOffset Unsigned32
+     }
+
+docsIfCmtsCmStatusIndex OBJECT-TYPE
+     SYNTAX      Integer32 (1..2147483647)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Index value to uniquely identify an entry in this table.
+          For an individual cable modem, this index value SHOULD
+          NOT change during CMTS uptime."
+     ::= { docsIfCmtsCmStatusEntry 1 }
+
+docsIfCmtsCmStatusMacAddress OBJECT-TYPE
+     SYNTAX      MacAddress
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "MAC address of the cable modem.  If the cable modem has
+          multiple MAC addresses, this is the MAC address associated
+          with the Cable interface."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 8.2.2."
+     ::= { docsIfCmtsCmStatusEntry 2 }
+
+docsIfCmtsCmStatusIpAddress OBJECT-TYPE
+     SYNTAX      IpAddress
+     MAX-ACCESS  read-only
+     STATUS      deprecated
+     DESCRIPTION
+         "IP address of this cable modem.  If the cable modem has no
+          IP address assigned, or the IP address is unknown, this
+          object returns a value of 0.0.0.0.  If the cable modem has
+          multiple IP addresses, this object returns the IP address
+          associated with the Cable interface.
+          This object has been deprecated and replaced by
+          docsIfCmtsCmStatusInetAddressType and
+          docsIfCmtsCmStatusInetAddress, to enable IPv6 addressing
+          in the future."
+     ::= { docsIfCmtsCmStatusEntry 3 }
+
+docsIfCmtsCmStatusDownChannelIfIndex OBJECT-TYPE
+     SYNTAX      InterfaceIndexOrZero
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "IfIndex of the downstream channel that this CM is
+          connected to.  If the downstream channel is unknown, this
+          object returns a value of zero."
+     ::= { docsIfCmtsCmStatusEntry 4 }
+
+docsIfCmtsCmStatusUpChannelIfIndex OBJECT-TYPE
+     SYNTAX      InterfaceIndexOrZero
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "For DOCSIS 2.0, indicates the ifIndex of the logical
+         upstream channel (ifType 205) this CM is connected to.
+         For DOCSIS 1.x, indicates the ifIndex of the upstream
+          channel (ifType 129) this CM is connected to.
+          If the upstream channel is unknown, this object
+          returns a value of zero."
+     ::= { docsIfCmtsCmStatusEntry 5 }
+
+docsIfCmtsCmStatusRxPower OBJECT-TYPE
+     SYNTAX      TenthdBmV
+     UNITS       "ThenthdBmV"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The receive power as perceived for upstream data from
+          this cable modem.
+          If the receive power is unknown, this object returns
+          a value of zero."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.18."
+     ::= { docsIfCmtsCmStatusEntry 6 }
+
+docsIfCmtsCmStatusTimingOffset OBJECT-TYPE
+     SYNTAX      Unsigned32 (0..4294967295)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "A measure of the current round trip time for this CM.
+          Used for timing of CM upstream transmissions to ensure
+          synchronized arrivals at the CMTS.  Units are in terms
+          of (6.25 microseconds/64).  Returns zero if the value
+          is unknown.
+          For channels requiring finer resolution, please refer to
+          object docsIfCmtsCmStatusHighResolutionTimingOffset."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.17."
+     ::= { docsIfCmtsCmStatusEntry 7 }
+
+docsIfCmtsCmStatusEqualizationData OBJECT-TYPE
+     SYNTAX      DocsEqualizerData
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Equalization data for this CM, as measured by the CMTS.
+          Returns the zero-length OCTET STRING if the value is
+          unknown or if there is no equalization data available
+          or defined."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Figure 8-23."
+     ::= { docsIfCmtsCmStatusEntry 8 }
+
+docsIfCmtsCmStatusValue OBJECT-TYPE
+     SYNTAX      INTEGER {
+         other(1),
+         ranging(2),
+         rangingAborted(3),
+         rangingComplete(4),
+         ipComplete(5),
+         registrationComplete(6),
+         accessDenied(7),
+         operational(8),
+         -- value 8 should not be used
+         registeredBPIInitializing(9)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current cable modem connectivity state, as specified
+          in the RF Interface Specification.  Returned status
+          information is the CM status, as assumed by the CMTS,
+          and indicates the following events:
+          other(1)
+             Any state other than below.
+          ranging(2)
+             The CMTS has received an Initial Ranging Request
+             message from the CM, and the ranging process is not
+             yet complete.
+          rangingAborted(3)
+             The CMTS has sent a Ranging Abort message to the CM.
+
+          rangingComplete(4)
+             The CMTS has sent a Ranging Complete message to the CM.
+          ipComplete(5)
+             The CMTS has received a DHCP reply message and
+             forwarded it to the CM.
+          registrationComplete(6)
+             The CMTS has sent a Registration Response message to
+             the CM.
+          accessDenied(7)
+             The CMTS has sent a Registration Aborted message
+             to the CM.
+          operational(8)
+             Value 8 is considered reserved and should not be defined
+             in future revisions of this MIB module to avoid conflict
+             with documented implementations that support value 8 to
+             indicate operational state after completing the BPI
+             initialization process.
+          registeredBPIInitializing(9)
+             Baseline Privacy (BPI) is enabled and the CMTS is in the
+             process of completing BPI initialization.  This state
+             MAY last for a significant length of time if failures
+             occur during the initialization process.  After
+             completion of BPI initialization, the CMTS will report
+             registrationComplete(6).
+          The CMTS only needs to report states it is able to
+          detect."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 11.2."
+     ::= { docsIfCmtsCmStatusEntry 9 }
+
+docsIfCmtsCmStatusUnerroreds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received without error from this cable modem.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.4."
+     ::= { docsIfCmtsCmStatusEntry 10 }
+
+docsIfCmtsCmStatusCorrecteds OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received with correctable errors from this
+          cable modem.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.4."
+     ::= { docsIfCmtsCmStatusEntry 11 }
+
+docsIfCmtsCmStatusUncorrectables OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received with uncorrectable errors from this
+          cable modem.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.4."
+     ::= { docsIfCmtsCmStatusEntry 12 }
+
+docsIfCmtsCmStatusSignalNoise OBJECT-TYPE
+     SYNTAX      TenthdB
+     UNITS       "TenthdB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Signal/Noise ratio as perceived for upstream data from
+          this cable modem.
+          If the Signal/Noise is unknown, this object returns
+          a value of zero."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 4-1 and 4-2."
+     ::= { docsIfCmtsCmStatusEntry 13 }
+
+docsIfCmtsCmStatusMicroreflections OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     UNITS       "-dBc"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Total microreflections, including in-channel response
+          as perceived on this interface, measured in dBc below
+          the signal level.
+          This object is not assumed to return an absolutely
+          accurate value, but it gives a rough indication
+          of microreflections received on this interface.
+          It is up to the implementer to provide information
+          as accurately as possible.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 4-1 and 4-2"
+     ::= { docsIfCmtsCmStatusEntry 14 }
+
+docsIfCmtsCmStatusExtUnerroreds OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received without error from this cable modem.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.5."
+     ::= { docsIfCmtsCmStatusEntry 15 }
+
+docsIfCmtsCmStatusExtCorrecteds OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received with correctable errors from this
+          cable modem.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.5."
+     ::= { docsIfCmtsCmStatusEntry 16 }
+
+docsIfCmtsCmStatusExtUncorrectables OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "codewords"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Codewords received with uncorrectable errors from this
+          cable modem.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.5."
+     ::= { docsIfCmtsCmStatusEntry 17 }
+
+docsIfCmtsCmStatusDocsisRegMode OBJECT-TYPE
+        SYNTAX      DocsisQosVersion
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indication of whether the CM has registered using 1.0
+             Class of Service or 1.1 Quality of Service."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Annex G."
+     ::= { docsIfCmtsCmStatusEntry 18 }
+
+docsIfCmtsCmStatusModulationType OBJECT-TYPE
+      SYNTAX      DocsisUpstreamType
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Indicates modulation type currently used by the CM.  Since
+           this object specifically identifies PHY mode, the shared
+           type is not permitted.  If the upstream channel is
+           unknown, this object returns a value of zero."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 8-19."
+      ::= { docsIfCmtsCmStatusEntry 19 }
+
+docsIfCmtsCmStatusInetAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of internet address of
+             docsIfCmtsCmStatusInetAddress.  If the cable modem
+             internet address is unassigned or unknown, then the
+             value of this object is unknown(0)."
+        ::= { docsIfCmtsCmStatusEntry 20 }
+
+docsIfCmtsCmStatusInetAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Internet address of this cable modem.  If the Cable
+             Modem has no Internet address assigned, or the Internet
+             address is unknown, the value of this object is the
+             zero-length OCTET STRING.  If the cable modem has
+             multiple Internet addresses, this object returns the
+             Internet address associated with the Cable
+             (i.e., RF MAC) interface."
+        ::= { docsIfCmtsCmStatusEntry 21 }
+
+docsIfCmtsCmStatusValueLastUpdate OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when docsIfCmtsCmStatusValue
+             was last updated."
+        ::= { docsIfCmtsCmStatusEntry 22 }
+
+docsIfCmtsCmStatusHighResolutionTimingOffset OBJECT-TYPE
+     SYNTAX      Unsigned32 (0..4294967295)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "A measure of the current round trip time for this CM.
+          Used for timing of CM upstream transmissions to ensure
+          synchronized arrivals at the CMTS.  Units are in terms
+          of (6.25 microseconds/(64*256)).  Returns zero if the value
+          is unknown.
+          This is the high resolution version of object
+          docsIfCmtsCmStatusTimingOffset, for channels requiring
+          finer resolution."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Section 6.2.17."
+     ::= { docsIfCmtsCmStatusEntry 23 }
+
+--
+-- The CMTS Service Table.
+--
+
+docsIfCmtsServiceTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsServiceEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes of upstream service queues
+          in a Cable Modem Termination System."
+     ::= { docsIfCmtsObjects 4 }
+
+docsIfCmtsServiceEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsServiceEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes the attributes of a single upstream bandwidth
+          service queue.
+          Entries in this table exist for each ifEntry with an
+          ifType of docsCableMaclayer(127), and for each service
+          queue (Service ID) within this MAC layer.
+          Entries in this table are created with the creation of
+          individual Service IDs by the MAC layer and removed
+          when a Service ID is removed."
+     INDEX { ifIndex, docsIfCmtsServiceId }
+     ::= { docsIfCmtsServiceTable 1 }
+
+DocsIfCmtsServiceEntry ::= SEQUENCE {
+
+         docsIfCmtsServiceId               Integer32,
+         docsIfCmtsServiceCmStatusIndex    Integer32,  -- deprecated
+         docsIfCmtsServiceAdminStatus      INTEGER,
+         docsIfCmtsServiceQosProfile       Integer32,
+         docsIfCmtsServiceCreateTime       TimeStamp,
+         docsIfCmtsServiceInOctets         Counter32,
+         docsIfCmtsServiceInPackets        Counter32,
+         docsIfCmtsServiceNewCmStatusIndex Integer32
+     }
+
+docsIfCmtsServiceId OBJECT-TYPE
+     SYNTAX      Integer32 (1..16383)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Identifies a service queue for upstream bandwidth.  The
+          attributes of this service queue are shared between the
+          Cable Modem and the Cable Modem Termination System.
+          The CMTS allocates upstream bandwidth to this service
+          queue based on requests from the CM and on the class of
+          service associated with this queue."
+     ::= { docsIfCmtsServiceEntry 1 }
+
+docsIfCmtsServiceCmStatusIndex OBJECT-TYPE
+     SYNTAX      Integer32 (0..65535)
+     MAX-ACCESS  read-only
+     STATUS      deprecated
+     DESCRIPTION
+         "Pointer to an entry in docsIfCmtsCmStatusTable identifying
+          the cable modem using this Service Queue.  If multiple
+          cable modems are using this Service Queue, the value of
+          this object is zero.
+          This object has been deprecated and replaced by
+          docsIfCmtsServiceNewCmStatusIndex, to fix a mismatch
+          of the value range with respect to docsIfCmtsCmStatusIndex
+          (1..2147483647)."
+     ::= { docsIfCmtsServiceEntry 2 }
+
+docsIfCmtsServiceAdminStatus OBJECT-TYPE
+     SYNTAX      INTEGER {
+         enabled(1),
+         disabled(2),
+         destroyed(3) }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "Allows a service class for a particular modem to be
+          suppressed, (re-)enabled, or deleted altogether."
+     ::= { docsIfCmtsServiceEntry 3 }
+
+docsIfCmtsServiceQosProfile OBJECT-TYPE
+     SYNTAX      Integer32 (0..16383)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The index in docsIfQosProfileTable describing the quality
+          of service attributes associated with this particular
+          service.  If no associated docsIfQosProfileTable entry
+          exists, this object returns a value of zero."
+     ::= { docsIfCmtsServiceEntry 4 }
+
+docsIfCmtsServiceCreateTime OBJECT-TYPE
+     SYNTAX      TimeStamp
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The value of sysUpTime when this entry was created."
+     ::= { docsIfCmtsServiceEntry 5 }
+
+docsIfCmtsServiceInOctets OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "Bytes"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The cumulative number of Packet Data octets received
+          on this Service ID.  The count does not include the
+          size of the Cable MAC header.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsServiceEntry 6 }
+
+docsIfCmtsServiceInPackets OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "packets"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The cumulative number of Packet Data packets received
+          on this Service ID.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsServiceEntry 7 }
+
+docsIfCmtsServiceNewCmStatusIndex OBJECT-TYPE
+     SYNTAX      Integer32 (0..2147483647)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Pointer (via docsIfCmtsCmStatusIndex) to an entry in
+          docsIfCmtsCmStatusTable identifying the cable modem
+          using this Service Queue.  If multiple cable modems are
+          using this Service Queue, the value of this object is
+          zero."
+     ::= { docsIfCmtsServiceEntry 8 }
+
+--
+-- The following table provides upstream channel modulation profiles.
+-- Entries in this table can be
+-- re-used by one or more upstream channels.  An upstream channel
+-- will have a modulation profile for each value of
+-- docsIfModIntervalUsageCode.
+--
+
+docsIfCmtsModulationTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsModulationEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes a modulation profile associated with one or more
+          upstream channels."
+     ::= { docsIfCmtsObjects 5 }
+
+docsIfCmtsModulationEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsModulationEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Describes a modulation profile for an Interval Usage Code
+          for one or more upstream channels.
+          Entries in this table are created by the operator.
+
+          Initial default entries MAY be created at system
+          initialization time, which could report a value of
+          'permanent' or 'readOnly' for docsIfCmtsModStorageType.
+          A CMTS MAY reject the creation of additional Interval
+          Usage Codes for a modulation profile being defined at
+          Initialization time.
+          No individual objects have to be specified in order
+          to create an entry in this table.
+
+          Note that some objects do not have DEFVAL clauses
+          but do have calculated defaults and need not be specified
+          during row creation."
+      INDEX { docsIfCmtsModIndex, docsIfCmtsModIntervalUsageCode}
+     ::= { docsIfCmtsModulationTable 1 }
+
+DocsIfCmtsModulationEntry ::= SEQUENCE {
+         docsIfCmtsModIndex                    Integer32,
+         docsIfCmtsModIntervalUsageCode        INTEGER,
+         docsIfCmtsModControl                  RowStatus,
+         docsIfCmtsModType                     INTEGER,
+         docsIfCmtsModPreambleLen              Integer32,
+         docsIfCmtsModDifferentialEncoding     TruthValue,
+         docsIfCmtsModFECErrorCorrection       Integer32,
+         docsIfCmtsModFECCodewordLength        Integer32,
+         docsIfCmtsModScramblerSeed            Integer32,
+         docsIfCmtsModMaxBurstSize             Integer32,
+         docsIfCmtsModGuardTimeSize            Unsigned32,
+         docsIfCmtsModLastCodewordShortened    TruthValue,
+         docsIfCmtsModScrambler                TruthValue,
+         docsIfCmtsModByteInterleaverDepth     Unsigned32,
+         docsIfCmtsModByteInterleaverBlockSize Unsigned32,
+         docsIfCmtsModPreambleType             INTEGER,
+         docsIfCmtsModTcmErrorCorrectionOn     TruthValue,
+         docsIfCmtsModScdmaInterleaverStepSize Unsigned32,
+         docsIfCmtsModScdmaSpreaderEnable      TruthValue,
+         docsIfCmtsModScdmaSubframeCodes       Unsigned32,
+         docsIfCmtsModChannelType              DocsisUpstreamType,
+         docsIfCmtsModStorageType              StorageType
+     }
+
+docsIfCmtsModIndex OBJECT-TYPE
+     SYNTAX       Integer32 (1..2147483647)
+     MAX-ACCESS   not-accessible
+     STATUS      current
+     DESCRIPTION
+          "An index into the Channel Modulation table representing
+           a group of Interval Usage Codes, all associated with the
+           same channel."
+     ::= { docsIfCmtsModulationEntry 1 }
+
+docsIfCmtsModIntervalUsageCode OBJECT-TYPE
+     SYNTAX       INTEGER {
+         request(1),
+         requestData(2),
+         initialRanging(3),
+         periodicRanging(4),
+         shortData(5),
+         longData(6),
+         advPhyShortData(9),
+         advPhyLongData(10),
+         ugs(11)
+     }
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An index into the Channel Modulation table that, when
+          grouped with other Interval Usage Codes, fully
+          instantiates all modulation sets for a given upstream
+          channel."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 8-20."
+     ::= { docsIfCmtsModulationEntry 2 }
+
+docsIfCmtsModControl OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Controls and reflects the status of rows in this table.
+          There is no restriction on the changing of values in this
+          table while their associated rows are active, with the
+          exception of:
+
+          1. If a modulation profile is being referenced by one
+             or more upstream channels, an attempt to set the value
+             of docsIfCmtsModChannelType returns an
+             'inconsistentValue' error.
+
+          2. If a modulation profile is being referenced by one
+             or more upstream channels, an attempt to set
+             docsIfCmtsModControl to destroy(6) or notInService(2)
+             returns an 'inconsistentValue' error."
+     ::= { docsIfCmtsModulationEntry 3 }
+
+docsIfCmtsModType OBJECT-TYPE
+     SYNTAX      INTEGER {
+         other(1),
+         qpsk(2),
+         qam16(3),
+         qam8(4),
+         qam32(5),
+         qam64(6),
+         qam128(7)
+
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The modulation type used on this channel.  Returns
+          other(1) if the modulation type is not
+          qpsk, qam16, qam8, qam32, qam64, or qam128.
+          Type qam128 is used for SCDMA channels only.
+          See the reference for the modulation profiles
+          implied by different modulation types."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { qpsk }
+     ::= { docsIfCmtsModulationEntry 4 }
+
+docsIfCmtsModPreambleLen OBJECT-TYPE
+     SYNTAX      Integer32 (0..1536)
+     UNITS       "bits"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The preamble length for this modulation profile in bits.
+          Default value is the minimum needed by the implementation
+          at the CMTS for the given modulation profile."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     ::= { docsIfCmtsModulationEntry 5 }
+
+docsIfCmtsModDifferentialEncoding OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Specifies whether or not differential encoding is used
+          on this channel."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { false }
+     ::= { docsIfCmtsModulationEntry 6 }
+
+docsIfCmtsModFECErrorCorrection OBJECT-TYPE
+     SYNTAX      Integer32 (0..16)
+     UNITS       "Bytes"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The number of correctable errored bytes (t) used in
+          forward error correction code.  The value of 0 indicates
+          that no correction is employed.  The number of check bytes
+          appended will be twice this value."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { 0 }
+     ::= { docsIfCmtsModulationEntry 7 }
+
+docsIfCmtsModFECCodewordLength OBJECT-TYPE
+     SYNTAX      Integer32 (1..255)
+     UNITS       "Bytes"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The number of data bytes (k) in the forward error
+          correction codeword.
+          This object is not used if docsIfCmtsModFECErrorCorrection
+          is zero."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { 32 }
+     ::= { docsIfCmtsModulationEntry 8 }
+
+docsIfCmtsModScramblerSeed OBJECT-TYPE
+     SYNTAX      Integer32 (0..32767)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The 15-bit seed value for the scrambler polynomial."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 8-19."
+     DEFVAL { 0 }
+     ::= { docsIfCmtsModulationEntry 9 }
+
+docsIfCmtsModMaxBurstSize OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "The maximum number of mini-slots that can be transmitted
+          during this channel's burst time.  Returns zero if the
+          burst length is bounded by the allocation MAP rather than
+          by this profile.
+          Default value is 0, except for shortData, where it is 8."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 8-19."
+     ::= { docsIfCmtsModulationEntry 10 }
+
+docsIfCmtsModGuardTimeSize OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "Symbol-times"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of symbol-times that MUST follow the end of
+          this channel's burst.  Default value is the minimum time
+          needed by the implementation for this modulation profile."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     ::= { docsIfCmtsModulationEntry 11 }
+
+docsIfCmtsModLastCodewordShortened OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Indicates whether the last FEC codeword is truncated."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { true }
+     ::= { docsIfCmtsModulationEntry 12 }
+
+docsIfCmtsModScrambler OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Indicates whether the scrambler is employed."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { false }
+     ::= { docsIfCmtsModulationEntry 13 }
+
+docsIfCmtsModByteInterleaverDepth OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "ATDMA Byte Interleaver Depth (Ir).  This object returns 1
+          for non-ATDMA profiles."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { 1 }
+     ::= { docsIfCmtsModulationEntry 14 }
+
+docsIfCmtsModByteInterleaverBlockSize OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "ATDMA Byte Interleaver Block size (Br).  This object
+          returns zero for non-ATDMA profiles "
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { 18 }
+     ::= { docsIfCmtsModulationEntry 15 }
+
+docsIfCmtsModPreambleType OBJECT-TYPE
+     SYNTAX       INTEGER {
+         unknown(0),
+         qpsk0(1),
+         qpsk1(2)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Preamble type for DOCSIS 2.0 bursts.  The value
+          'unknown(0)' represents a row entry consisting only of
+          DOCSIS 1.x bursts"
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { qpsk0 }
+     ::= { docsIfCmtsModulationEntry 16 }
+
+docsIfCmtsModTcmErrorCorrectionOn OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Trellis Code Modulation (TCM) On/Off.  This value returns
+          false for non-S-CDMA profiles."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { false }
+     ::= { docsIfCmtsModulationEntry 17 }
+
+docsIfCmtsModScdmaInterleaverStepSize OBJECT-TYPE
+     SYNTAX      Unsigned32 (0 | 1..32)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         " S-CDMA Interleaver step size.  This value returns zero
+           for non-S-CDMA profiles."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     DEFVAL { 1 }
+     ::= { docsIfCmtsModulationEntry 18 }
+
+docsIfCmtsModScdmaSpreaderEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         " S-CDMA spreader.  This value returns false for non-S-CDMA
+           profiles.  Default value for IUC 3 and 4 is OFF; for
+           all other IUCs it is ON."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Tables 6-7, and 8-19."
+     ::= { docsIfCmtsModulationEntry 19 }
+
+docsIfCmtsModScdmaSubframeCodes OBJECT-TYPE
+     SYNTAX      Unsigned32 (0 | 1..128)
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         " S-CDMA sub-frame size.  This value returns zero
+           for non-S-CDMA profiles."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 6-7, and 8-19."
+     DEFVAL { 1 }
+     ::= { docsIfCmtsModulationEntry 20 }
+
+docsIfCmtsModChannelType OBJECT-TYPE
+     SYNTAX      DocsisUpstreamType
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+         "Describes the modulation channel type for this modulation
+          entry.
+          All the active entries in a modulation profile (that is all
+          active entries that share a common docsIfCmtsModIndex)
+          MUST have the same value of docsIfCmtsModChannelType."
+     REFERENCE
+         "Data-Over-Cable Service Interface Specifications: Radio
+          Frequency Interface Specification SP-RFIv2.0-I10-051209,
+          Table 8-19."
+     DEFVAL { tdma }
+     ::= { docsIfCmtsModulationEntry 21 }
+
+docsIfCmtsModStorageType OBJECT-TYPE
+     SYNTAX       StorageType
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The storage type for this conceptual row.
+          Entries with this object set to permanent(4)
+          do not require write operations for read-write
+          objects."
+     DEFVAL      { nonVolatile }
+ ::= { docsIfCmtsModulationEntry 22 }
+
+docsIfCmtsQosProfilePermissions OBJECT-TYPE
+     SYNTAX      BITS {
+         createByManagement(0),
+         updateByManagement(1),
+         createByModems(2)
+
+     }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "This object specifies permitted methods of creating
+          entries in docsIfQosProfileTable.
+          createByManagement(0) is set if entries can be created
+          using SNMP.  updateByManagement(1) is set if updating
+          entries using SNMP is permitted.  createByModems(2)
+          is set if entries can be created based on information
+          in REG-REQ MAC messages received from cable modems.
+          Information in this object is only applicable if
+          docsIfQosProfileTable is implemented as read-create.
+          Otherwise, this object is implemented as read-only
+          and returns createByModems(2).
+          Either createByManagement(0) or updateByManagement(1)
+          MUST be set when writing to this object.
+          Note that BITS objects are encoded most significant bit
+          first.  For example, if bit 2 is set, the value of this
+          object is the octet string '20'H."
+     ::= { docsIfCmtsObjects 6 }
+
+docsIfCmtsMacToCmTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsMacToCmEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "This is a table to provide a quick access index into the
+          docsIfCmtsCmStatusTable.  There is exactly one row in this
+          table for each row in the docsIfCmtsCmStatusTable.  In
+          general, the management station SHOULD use this table only
+          to get a pointer into the docsIfCmtsCmStatusTable (which
+          corresponds to the CM's RF interface MAC address) and
+          SHOULD not iterate (e.g., GetNext through) this table."
+     ::= { docsIfCmtsObjects 7 }
+
+docsIfCmtsMacToCmEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsMacToCmEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "A row in the docsIfCmtsMacToCmTable.
+          An entry in this table exists for each cable modem
+          that is connected to the CMTS implementing this table."
+     INDEX   { docsIfCmtsCmMac }
+     ::= {docsIfCmtsMacToCmTable 1 }
+
+DocsIfCmtsMacToCmEntry ::= SEQUENCE {
+
+             docsIfCmtsCmMac     MacAddress,
+             docsIfCmtsCmPtr     Integer32
+     }
+
+docsIfCmtsCmMac OBJECT-TYPE
+     SYNTAX      MacAddress
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "The RF side MAC address for the referenced CM (e.g., the
+          interface on the CM that has docsCableMacLayer(127) as
+          its ifType)."
+     ::= { docsIfCmtsMacToCmEntry 1 }
+
+docsIfCmtsCmPtr OBJECT-TYPE
+     SYNTAX      Integer32 (1..2147483647)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "An row index into docsIfCmtsCmStatusTable.  When queried
+          with the correct instance value (e.g., a CM's MAC address),
+          returns the index in docsIfCmtsCmStatusTable that
+          represents that CM."
+     ::= { docsIfCmtsMacToCmEntry 2 }
+
+-- The following independent object and associated table provide
+-- operators with a mechanism to evaluate the load/utilization of
+-- both upstream and downstream physical channels.  This information
+-- may be used for capacity planning and incident analysis and may
+-- be particularly helpful in provisioning of high value QOS.
+--
+-- Utilization is expressed as an index representing the calculated
+-- percentage utilization of the upstream or downstream channel in
+-- the most recent sampling interval (i.e., utilization interval).
+-- Refer to the DESCRIPTION field of the
+-- docsIfCmtsChannelUtUtilization object for definitions and
+-- calculation details.
+
+docsIfCmtsChannelUtilizationInterval OBJECT-TYPE
+     SYNTAX      Integer32 (0..86400)
+     UNITS       "seconds"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+         "The time interval in seconds over which the channel
+          utilization index is calculated.  All upstream/downstream
+          channels use the same
+          docsIfCmtsChannelUtilizationInterval.
+
+          Setting a value of zero disables utilization reporting.
+          A channel utilization index is calculated over a fixed
+          window applying to the most recent
+          docsIfCmtsChannelUtilizationInterval.  It would therefore
+          be prudent to use a relatively short
+          docsIfCmtsChannelUtilizationInterval.
+          It is a vendor decision whether to reset the timer when
+          docsIfCmtsChannelUtilizationInterval is changed during a
+          utilization sampling period."
+     ::= { docsIfCmtsObjects 8 }
+
+docsIfCmtsChannelUtilizationTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsChannelUtilizationEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Reports utilization statistics for attached upstream and
+          downstream physical channels."
+     ::= { docsIfCmtsObjects 9 }
+
+docsIfCmtsChannelUtilizationEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsChannelUtilizationEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "Utilization statistics for a single upstream or downstream
+          physical channel.  An entry exists in this table for each
+          ifEntry with an ifType equal to
+          docsCableDownstream (128)
+          or docsCableUpstream (129)."
+     INDEX  { ifIndex, docsIfCmtsChannelUtIfType,
+          docsIfCmtsChannelUtId }
+     ::= { docsIfCmtsChannelUtilizationTable 1 }
+
+DocsIfCmtsChannelUtilizationEntry ::= SEQUENCE {
+         docsIfCmtsChannelUtIfType         IANAifType,
+         docsIfCmtsChannelUtId             Integer32,
+         docsIfCmtsChannelUtUtilization    Integer32
+     }
+
+docsIfCmtsChannelUtIfType OBJECT-TYPE
+     SYNTAX       IANAifType
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "The secondary index into this table.  Indicates the IANA
+          interface type associated with this physical channel.
+          Only docsCableDownstream (128) and
+
+          docsCableUpstream (129) are valid."
+     ::= { docsIfCmtsChannelUtilizationEntry 1 }
+
+docsIfCmtsChannelUtId OBJECT-TYPE
+     SYNTAX       Integer32 (0..255)
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+          "The tertiary index into this table.  Indicates the CMTS
+           identifier for this physical channel."
+     ::= { docsIfCmtsChannelUtilizationEntry 2 }
+
+docsIfCmtsChannelUtUtilization OBJECT-TYPE
+     SYNTAX       Integer32 (0..100)
+     UNITS        "percent"
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The calculated and truncated utilization index for this
+          physical upstream or downstream channel, accurate as of
+          the most recent docsIfCmtsChannelUtilizationInterval.
+
+          Upstream Channel Utilization Index:
+
+          The upstream channel utilization index is expressed as a
+          percentage of mini-slots utilized on the physical channel,
+          regardless of burst type.  For an Initial Maintenance
+          region, the mini-slots for the complete region are
+          considered utilized if the CMTS received an upstream
+          burst within the region from any CM on the physical
+          channel.  For contention REQ and REQ/DATA regions, the
+          mini-slots for a transmission opportunity within the
+          region are considered utilized if the CMTS received an
+          upstream burst within the opportunity from any CM on the
+          physical channel.  For all other regions, utilized
+          mini-slots are those in which the CMTS granted
+          bandwidth to any unicast SID on the physical channel.
+
+          For an upstream interface that has multiple logical
+          upstream channels enabled, the utilization index is a
+          weighted sum of utilization indices for the logical
+          channels.  The weight for each utilization index is the
+          percentage of upstream mini-slots allocated for the
+          corresponding logical channel.
+          Example:
+          If 75% of bandwidth is allocated to the first logical
+          channel and 25% to the second, and the utilization
+          indices for each are 60 and 40, respectively, the
+
+          utilization index for the upstream physical channel is
+          (60 * 0.75) + (40 * 0.25) = 55.  This figure
+          applies to the most recent utilization interval.
+
+          Downstream Channel Utilization Index:
+
+          The downstream channel utilization index is a percentage
+          expressing the ratio between bytes used to transmit data
+          versus the total number of bytes transmitted in the raw
+          bandwidth of the MPEG channel.  As with the upstream
+          utilization index, the calculated value represents
+          the most recent utilization interval.
+          Formula:
+          Downstream utilization index =
+          (100 * (data bytes / raw bytes))
+
+          Definitions:
+          Data bytes:    Number of bytes transmitted as data in the
+                         docsIfCmtsChannelUtilizationInterval.
+                         Identical to docsIfCmtsDownChannelCtrUsed
+                         Bytes measured over the utilization
+                         interval.
+          Raw bandwidth: Total number of bytes available for
+                         transmitting data, not including bytes
+                         used for headers and other overhead.
+          Raw bytes:     (raw bandwidth *
+                         docsIfCmtsChannelUtilizationInterval).
+                         Identical to docsIfCmtsDownChannelCtrTotal
+                         Bytes measured over the utilization
+                         interval."
+     ::= { docsIfCmtsChannelUtilizationEntry 3 }
+
+-- The following table provides operators with input data
+-- appropriate for calculating downstream channel utilization.
+-- Operators may use the docsIfCmtsChannelUtilizationTable or
+-- perform their own polling of the
+-- docsIfCmtsDownChannelCounterTable objects to characterize
+-- their downstream channel usage.  The 32-bit counter objects are
+-- included to provide backward compatibility with SNMPv1 managers,
+-- which cannot access 64-bit counter objects.
+
+docsIfCmtsDownChannelCounterTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsDownChannelCounterEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "This table is implemented at the CMTS to collect
+          downstream channel statistics for utilization
+
+          calculations."
+     ::= { docsIfCmtsObjects 10 }
+
+docsIfCmtsDownChannelCounterEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsDownChannelCounterEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An entry provides a list of traffic counters for a single
+          downstream channel.
+          An entry in this table exists for each ifEntry with an
+          ifType of docsCableDownstream(128)."
+     INDEX { ifIndex }
+     ::= { docsIfCmtsDownChannelCounterTable 1 }
+
+DocsIfCmtsDownChannelCounterEntry ::= SEQUENCE {
+         docsIfCmtsDownChnlCtrId              Integer32,
+         docsIfCmtsDownChnlCtrTotalBytes      Counter32,
+         docsIfCmtsDownChnlCtrUsedBytes       Counter32,
+         docsIfCmtsDownChnlCtrExtTotalBytes   Counter64,
+         docsIfCmtsDownChnlCtrExtUsedBytes    Counter64
+     }
+
+docsIfCmtsDownChnlCtrId OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The Cable Modem Termination System identification
+          of the downstream channel within this particular MAC
+          interface.  If the interface is down, the object returns
+          the most current value.  If the downstream channel ID is
+          unknown, this object returns a value of 0."
+     ::= { docsIfCmtsDownChannelCounterEntry 1 }
+
+docsIfCmtsDownChnlCtrTotalBytes OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "Bytes"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "At the CMTS, the total number of bytes in the Payload
+          portion of MPEG Packets (i.e., not including MPEG header
+          or pointer_field) transported by this downstream channel.
+          This is the 32-bit version of
+          docsIfCmtsDownChnlCtrExtTotalBytes, included to provide
+          back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsDownChannelCounterEntry 2 }
+
+docsIfCmtsDownChnlCtrUsedBytes OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "Bytes"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "At the CMTS, the total number of DOCSIS data bytes
+          transported by this downstream channel.
+          The number of data bytes is defined as the total number
+          of bytes transported in DOCSIS payloads minus the number
+          of stuff bytes transported in DOCSIS payloads.
+          This is the 32-bit version of
+          docsIfCmtsDownChnlCtrExtUsedBytes, included to provide
+          back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsDownChannelCounterEntry 3 }
+
+docsIfCmtsDownChnlCtrExtTotalBytes OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "Bytes"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "At the CMTS, the total number of bytes in the Payload
+          portion of MPEG Packets (i.e., not including MPEG header
+          or pointer_field) transported by this downstream
+          channel.
+          This is the 64-bit version of
+          docsIfCmtsDownChnlCtrTotalBytes and will not be
+          accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsDownChannelCounterEntry 4 }
+
+docsIfCmtsDownChnlCtrExtUsedBytes OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "Bytes"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "At the CMTS, the total number of DOCSIS data bytes
+          transported by this downstream channel.  The number
+          of data bytes is defined as the total number of bytes
+          transported in DOCSIS payloads minus the number of
+          stuff bytes transported in DOCSIS payloads.
+          This is the 64-bit version of
+          docsIfCmtsDownChnlCtrUsedBytes and will not be accessible
+          to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsDownChannelCounterEntry 5 }
+
+-- The following table provides operators with input data appropriate
+-- for calculating upstream channel utilization, and for determining
+-- the traffic characteristics of upstream channels.  Operators may
+-- use the docsIfCmtsChannelUtilizationTable or perform their own
+-- polling of the docsIfCmtsUpChannelCounterTable objects for
+-- utilization determination.
+-- The first four 32 and 64 objects in this table are mandatory.
+-- Vendors may choose to implement the remaining optional objects to
+-- provide operators with finer characterization of upstream channel
+-- traffic patterns.  The 32-bit counter objects are included to
+-- provide backward compatibility with SNMPv1 managers, which cannot
+-- access 64-bit counter objects.
+
+docsIfCmtsUpChannelCounterTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF DocsIfCmtsUpChannelCounterEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "This table is implemented at the CMTS to provide upstream
+          channel statistics appropriate for channel utilization
+          calculations."
+     ::= { docsIfCmtsObjects 11 }
+
+docsIfCmtsUpChannelCounterEntry OBJECT-TYPE
+     SYNTAX      DocsIfCmtsUpChannelCounterEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "List of traffic statistics for a single upstream channel.
+          For DOCSIS 2.0 CMTSs, an entry in this table
+          exists for each ifEntry with an ifType of
+          docsCableUpstreamChannel (205).
+
+          For DOCSIS 1.x CMTSs, an entry in this table
+          exists for each ifEntry with an ifType of
+          docsCableUpstream (129)."
+     INDEX { ifIndex }
+     ::= { docsIfCmtsUpChannelCounterTable 1 }
+
+DocsIfCmtsUpChannelCounterEntry ::= SEQUENCE {
+         docsIfCmtsUpChnlCtrId                          Integer32,
+         docsIfCmtsUpChnlCtrTotalMslots                 Counter32,
+         docsIfCmtsUpChnlCtrUcastGrantedMslots          Counter32,
+         docsIfCmtsUpChnlCtrTotalCntnMslots             Counter32,
+         docsIfCmtsUpChnlCtrUsedCntnMslots              Counter32,
+         docsIfCmtsUpChnlCtrExtTotalMslots              Counter64,
+         docsIfCmtsUpChnlCtrExtUcastGrantedMslots       Counter64,
+         docsIfCmtsUpChnlCtrExtTotalCntnMslots          Counter64,
+         docsIfCmtsUpChnlCtrExtUsedCntnMslots           Counter64,
+         docsIfCmtsUpChnlCtrCollCntnMslots              Counter32,
+         docsIfCmtsUpChnlCtrTotalCntnReqMslots          Counter32,
+         docsIfCmtsUpChnlCtrUsedCntnReqMslots           Counter32,
+         docsIfCmtsUpChnlCtrCollCntnReqMslots           Counter32,
+         docsIfCmtsUpChnlCtrTotalCntnReqDataMslots      Counter32,
+         docsIfCmtsUpChnlCtrUsedCntnReqDataMslots       Counter32,
+         docsIfCmtsUpChnlCtrCollCntnReqDataMslots       Counter32,
+         docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots    Counter32,
+         docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots     Counter32,
+         docsIfCmtsUpChnlCtrCollCntnInitMaintMslots     Counter32,
+         docsIfCmtsUpChnlCtrExtCollCntnMslots           Counter64,
+         docsIfCmtsUpChnlCtrExtTotalCntnReqMslots       Counter64,
+         docsIfCmtsUpChnlCtrExtUsedCntnReqMslots        Counter64,
+         docsIfCmtsUpChnlCtrExtCollCntnReqMslots        Counter64,
+         docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots   Counter64,
+         docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots    Counter64,
+         docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots    Counter64,
+         docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots Counter64,
+         docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots  Counter64,
+         docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots  Counter64
+     }
+
+docsIfCmtsUpChnlCtrId OBJECT-TYPE
+     SYNTAX      Integer32 (0..255)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The CMTS identification of the upstream channel."
+     ::= { docsIfCmtsUpChannelCounterEntry 1 }
+
+docsIfCmtsUpChnlCtrTotalMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of all mini-slots
+          defined for this upstream logical channel.  This count
+          includes all IUCs and SIDs, even those allocated to the
+          NULL SID for a 2.0 logical channel that is inactive.  This
+          is the 32-bit version of docsIfCmtsUpChnlCtrExtTotalMslots
+          and is included for back compatibility with SNMPv1
+          managers.  Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 2 }
+
+docsIfCmtsUpChnlCtrUcastGrantedMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of unicast
+          granted mini-slots on the upstream logical channel,
+          regardless of burst type.  Unicast granted mini-slots are
+          those in which the CMTS assigned bandwidth to any unicast
+          SID on the logical channel.  However, this object does not
+          include minis-lots for reserved IUCs, or grants to SIDs
+          designated as meaning 'no CM'.  This is the 32-bit version
+          of docsIfCmtsUpChnlCtrExtUcastGrantedMslots, and is
+          included for back compatibility with SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 3 }
+
+docsIfCmtsUpChnlCtrTotalCntnMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          mini-slots defined for this upstream logical channel.  This
+          count includes all mini-slots assigned to a broadcast or
+
+          multicast SID on the logical channel.  This is the 32-bit
+          version of docsIfCmtsUpChnlCtrExtTotalCntnMslots, and is
+          included for back compatibility with SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 4 }
+
+docsIfCmtsUpChnlCtrUsedCntnMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          mini-slots utilized on the upstream logical channel.  For
+          contention regions, utilized mini-slots are those in which
+          the CMTS correctly received an upstream burst from any CM
+          on the upstream logical channel.  This is the 32-bit
+          version of docsIfCmtsUpChnlCtrExtUsedCntnMslots and is
+          included for back compatibility with SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 5 }
+
+docsIfCmtsUpChnlCtrExtTotalMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of all mini-slots
+          defined for this upstream logical channel.  This count
+          includes all IUCs and SIDs, even those allocated to the
+          NULL SID for a 2.0 logical channel that is inactive.  This
+          is the 64-bit version of docsIfCmtsUpChnlCtrTotalMslots
+          and will not be accessible to SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 6 }
+
+docsIfCmtsUpChnlCtrExtUcastGrantedMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of unicast
+          granted mini-slots on the upstream logical channel,
+          regardless of burst type.  Unicast granted mini-slots are
+          those in which the CMTS assigned bandwidth to any unicast
+          SID on the logical channel.  However, this object does not
+          include mini-slots for reserved IUCs, or grants to SIDs
+          designated as meaning 'no CM'.  This is the 64-bit version
+          of docsIfCmtsUpChnlCtrUcastGrantedMslots and will not be
+          accessible to SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 7 }
+
+docsIfCmtsUpChnlCtrExtTotalCntnMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          mini-slots defined for this upstream logical channel.  This
+          count includes all mini-slots assigned to a broadcast or
+          multicast SID on the logical channel.  This is the 64-bit
+          version of docsIfCmtsUpChnlCtrTotalCntnMslots and will
+          not be accessible to SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 8 }
+
+docsIfCmtsUpChnlCtrExtUsedCntnMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+
+          mini-slots utilized on the upstream logical channel.  For
+          contention regions, utilized mini-slots are those in which
+          the CMTS correctly received an upstream burst from any CM
+          on the upstream logical channel.  This is the 64-bit
+          version of docsIfCmtsUpChnlCtrUsedCntnMslots and will not
+          be accessible to SNMPv1 managers.
+          Support for this object is mandatory.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 9 }
+
+docsIfCmtsUpChnlCtrCollCntnMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          mini-slots subjected to collisions on the upstream logical
+          channel.  For contention regions, these are the mini-slots
+          applicable to bursts that the CMTS detected but could not
+          correctly receive.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtCollCntnMslots and is included for
+          back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 10 }
+
+docsIfCmtsUpChnlCtrTotalCntnReqMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request mini-slots defined for this upstream logical
+          channel.  This count includes all mini-slots for IUC1
+          assigned to a broadcast or multicast SID on the logical
+          channel.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtTotalCntnReqMslots and is included
+          for back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 11 }
+
+docsIfCmtsUpChnlCtrUsedCntnReqMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request mini-slots utilized on this upstream logical
+          channel.  This count includes all contention mini-slots for
+          IUC1 applicable to bursts that the CMTS correctly
+          received.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtUsedCntnReqMslots and is included
+          for back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 12 }
+
+docsIfCmtsUpChnlCtrCollCntnReqMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request mini-slots subjected to collisions on this upstream
+          logical channel.  This includes all contention mini-slots
+          for IUC1 applicable to bursts that the CMTS detected but
+          could not correctly receive.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtCollCntnReqMslots and is included
+          for back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 13 }
+
+docsIfCmtsUpChnlCtrTotalCntnReqDataMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+
+          request data mini-slots defined for this upstream logical
+          channel.  This count includes all mini-slots for IUC2
+          assigned to a broadcast or multicast SID on the logical
+          channel.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots and is
+          included for back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 14 }
+
+docsIfCmtsUpChnlCtrUsedCntnReqDataMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request data mini-slots utilized on this upstream logical
+          channel.  This includes all contention mini-slots for IUC2
+          applicable to bursts that the CMTS correctly received.
+          This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots and is
+          included for back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 15 }
+
+docsIfCmtsUpChnlCtrCollCntnReqDataMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request data mini-slots subjected to collisions on this
+          upstream logical channel.  This includes all contention
+          mini-slots for IUC2 applicable to bursts that the CMTS
+          detected, but could not correctly receive.  This is the
+          32-bit version of
+          docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots and is
+          included for back compatibility with SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 16 }
+
+docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          initial maintenance mini-slots defined for this upstream
+          logical channel.  This includes all mini-slots for IUC3
+          assigned to a broadcast or multicast SID on the logical
+          channel.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots
+          and is included for back compatibility with SNMPv1
+          managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 17 }
+
+docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          initial maintenance mini-slots utilized on this upstream
+          logical channel.  This includes all contention mini-slots
+          for IUC3 applicable to bursts that the CMTS correctly
+          received.  This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots
+          and is included for back compatibility with SNMPv1
+          managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 18 }
+
+docsIfCmtsUpChnlCtrCollCntnInitMaintMslots OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          initial maintenance mini-slots subjected to collisions on
+          this upstream logical channel.  This includes all
+          contention mini-slots for IUC3 applicable to bursts that
+          the CMTS detected, but could not correctly receive.
+          This is the 32-bit version of
+          docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots
+          and is included for back compatibility with SNMPv1
+          managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 19 }
+
+docsIfCmtsUpChnlCtrExtCollCntnMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of collision
+          contention mini-slots on the upstream logical channel.
+          For contention regions, these are the mini-slots applicable
+          to bursts that the CMTS detected, but could not correctly
+          receive.  This is the 64-bit version of
+          docsIfCmtsUpChnlCtrCollCntnMslots and will not be
+          accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 20 }
+
+docsIfCmtsUpChnlCtrExtTotalCntnReqMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request mini-slots defined for this upstream logical
+          channel.  This count includes all mini-slots for IUC1
+          assigned to a broadcast or multicast SID on the logical
+          channel.  This is the 64-bit version of
+          docsIfCmtsUpChnlCtrTotalCntnReqMslots and will not be
+          accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 21 }
+
+docsIfCmtsUpChnlCtrExtUsedCntnReqMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request mini-slots utilized on this upstream logical
+          channel.  This count includes all contention mini-slots for
+          IUC1 applicable to bursts that the CMTS correctly
+          received.  This is the 64-bit version of
+          docsIfCmtsUpChnlCtrUsedCntnReqMslots and will not be
+          accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 22 }
+
+docsIfCmtsUpChnlCtrExtCollCntnReqMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request mini-slots subjected to collisions on this upstream
+          logical channel.  This includes all contention mini-slots
+          for IUC1 applicable to bursts that the CMTS detected,
+          but could not correctly receive.  This is the 64-bit
+          version of docsIfCmtsUpChnlCtrCollCntnReqMslots and will
+          not be accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 23 }
+
+docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request data mini-slots defined for this upstream logical
+          channel.  This count includes all mini-slots for IUC2
+          assigned to a broadcast or multicast SID on the logical
+          channel.  This is the 64-bit version of
+          docsIfCmtsUpChnlCtrTotalCntnReqDataMslots and will not be
+          accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 24 }
+
+docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request data mini-slots utilized on this upstream logical
+          channel.  This includes all contention mini-slots for IUC2
+          applicable to bursts that the CMTS correctly received.
+          This is the 64-bit version of
+          docsIfCmtsUpChnlCtrUsedCntnReqDataMslots and will not be
+          accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 25 }
+
+docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          request data mini-slots subjected to collisions on this
+          upstream logical channel.  This includes all contention
+          mini-slots for IUC2 applicable to bursts that the CMTS
+          detected, but could not correctly receive.  This is the
+          64-bit version of
+          docsIfCmtsUpChnlCtrCollCntnReqDataMslots
+          and will not be accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 26 }
+
+docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of initial
+          maintenance mini-slots defined for this upstream logical
+          channel.  This count includes all mini-slots for IUC3
+          assigned to a broadcast or multicast SID on the logical
+          channel.  This is the 64-bit version of
+          docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots
+          and will not be accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 27 }
+
+docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of initial
+          maintenance mini-slots utilized on this upstream logical
+          channel.  This includes all contention mini-slots for IUC3
+          applicable to bursts that the CMTS correctly received.
+          This is the 64-bit version of
+          docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots
+          and will not be accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 28 }
+
+docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots OBJECT-TYPE
+     SYNTAX      Counter64
+     UNITS       "mini-slots"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "Current count, from CMTS initialization, of contention
+          initial maintenance mini-slots subjected to collisions on
+          this upstream logical channel.  This includes all
+          contention mini-slots for IUC3 applicable to bursts that
+          the CMTS detected, but could not correctly receive.
+          This is the 64-bit version of
+          docsIfCmtsUpChnlCtrCollCntnInitMaintMslots and will not
+          be accessible to SNMPv1 managers.
+          Discontinuities in the value of this counter can occur
+          at reinitialization of the managed system, and at other
+          times as indicated by the value of
+          ifCounterDiscontinuityTime for the associated ifIndex."
+     ::= { docsIfCmtsUpChannelCounterEntry 29 }
+
+--
+-- notification group is for future extension.
+--
+
+docsIfNotification OBJECT IDENTIFIER     ::= { docsIfMib 2 }
+
+--
+-- MIB Compliance statements.
+--
+
+--
+-- Conformance definitions
+--
+
+docsIfConformance  OBJECT IDENTIFIER     ::= { docsIfMib 3 }
+docsIfCompliances  OBJECT IDENTIFIER     ::= { docsIfConformance 1 }
+docsIfGroups       OBJECT IDENTIFIER     ::= { docsIfConformance 2 }
+
+docsIfBasicCompliance MODULE-COMPLIANCE
+     STATUS      deprecated
+     DESCRIPTION
+         "The compliance statement for devices that implement
+          DOCSIS 1.x compliant Radio Frequency Interfaces."
+
+MODULE  -- docsIfMib
+
+-- unconditionally mandatory groups
+MANDATORY-GROUPS {
+     docsIfBasicGroup
+     }
+
+-- conditionally mandatory group
+GROUP docsIfCmGroup
+     DESCRIPTION
+         "This group is implemented only in cable modems, not in
+          cable modem termination systems."
+
+-- conditionally mandatory group
+GROUP docsIfCmtsGroup
+     DESCRIPTION
+         "This group is implemented only in cable modem termination
+          systems, not in cable modems."
+
+OBJECT  docsIfDownChannelFrequency
+     WRITE-SYNTAX Integer32 (54000000..860000000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems.  The values above are
+          appropriate for a cable plant using a Sub-Split channel
+          plan.  If DOCSIS is extended to cover other types of
+          channel plans (and frequency allocations), this object
+          will be modified accordingly."
+
+OBJECT  docsIfDownChannelWidth
+     WRITE-SYNTAX Integer32 (6000000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is important to implement this object as read-only.
+          In cable modems, this object is always implemented as
+          read-only.  The above value is appropriate for cable
+          plants running under NTSC (National Television
+          Standards Committee) standards.  If DOCSIS is extended to
+          work with other standards (e.g., European standards), this
+          object will be modified accordingly."
+
+OBJECT  docsIfDownChannelModulation
+     WRITE-SYNTAX INTEGER {
+                            qam64 (3),
+                            qam256 (4)
+                          }
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfDownChannelInterleave
+     WRITE-SYNTAX INTEGER {
+                 taps8Increment16(3),
+                 taps16Increment8(4),
+                 taps32Increment4(5),
+                 taps64Increment2(6),
+                 taps128Increment1(7)
+                  }
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfDownChannelPower
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelFrequency
+     WRITE-SYNTAX Integer32 (5000000..42000000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems.  The values above are
+          appropriate for a cable plant using a Sub-Split channel
+          plan.  If DOCSIS is extended to cover other types of
+          channel plans (and frequency allocations), this object
+          will be modified accordingly."
+
+OBJECT  docsIfUpChannelWidth
+     WRITE-SYNTAX Integer32 (200000..3200000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems.  The above value is appropriate
+          for cable plants running under NTSC (National Television
+          Standards Committee) standards.  If DOCSIS is extended to
+          work with other standards (e.g., European standards), this
+          object will be modified accordingly."
+
+OBJECT  docsIfUpChannelModulationProfile
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelSlotSize
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfUpChannelRangingBackoffStart
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelRangingBackoffEnd
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelTxBackoffStart
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelTxBackoffEnd
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfQosProfPriority
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfMaxUpBandwidth
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfGuarUpBandwidth
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfMaxDownBandwidth
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfMaxTxBurst
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfBaselinePrivacy
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfStatus
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfCmtsServiceAdminStatus
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsSyncInterval
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsUcdInterval
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsInsertInterval
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsInvitedRangingAttempts
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsQosProfilePermissions
+     WRITE-SYNTAX     BITS {
+         createByManagement(0),
+         updateByManagement(1)
+        }
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsModType
+     WRITE-SYNTAX INTEGER {
+                     qpsk (2),
+                     qam16 (3)
+                      }
+     DESCRIPTION
+         "A management station MAY only set 16QAM or QPSK modulation,
+          but others might be possible, based on device
+          configuration."
+
+OBJECT  docsIfCmtsModPreambleLen
+     SYNTAX Integer32 (0..1024)
+     DESCRIPTION
+         "The range of the values for this MODULE-COMPLIANCE
+          is 0..1024."
+
+OBJECT  docsIfCmtsModFECErrorCorrection
+        SYNTAX Integer32 (0..10)
+        DESCRIPTION
+            "The range of the values for this MODULE-COMPLIANCE
+             is 0..10."
+     ::= { docsIfCompliances 1 }
+
+docsIfBasicComplianceV2 MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+         "The compliance statement for devices that implement
+          DOCSIS 2.0 Radio Frequency Interfaces."
+
+MODULE  -- docsIfMib
+
+-- unconditionally mandatory groups
+MANDATORY-GROUPS {
+     docsIfBasicGroupV2
+     }
+
+-- conditionally mandatory group
+GROUP docsIfCmGroupV2
+     DESCRIPTION
+         "This group is implemented only in cable modems, not in
+          cable modem termination systems."
+
+-- conditionally mandatory group
+GROUP docsIfCmtsGroupV2
+     DESCRIPTION
+         "This group is implemented only in cable modem termination
+          systems, not in cable modems."
+
+OBJECT  docsIfDownChannelFrequency
+     WRITE-SYNTAX Integer32 (47000000..862000000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems.
+          A range of 54MHz to 860MHz is appropriate for a cable
+          plant using a North American Sub-Split channel plan.
+          The spectrum range has been expanded to accommodate
+          a lower edge of 47MHz and an upper edge of 862MHz
+          for some European channel plans.
+          If DOCSIS is extended to cover other types of channel
+          plans (and frequency allocations), this object will be
+          modified accordingly."
+
+OBJECT  docsIfDownChannelWidth
+     WRITE-SYNTAX Integer32 (6000000 | 8000000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is important to implement this object as read-only.
+          In cable modems, this object is always implemented as
+          read-only.  The value of 6 MHz is appropriate for cable
+          plants running under NTSC (National Television
+          Standards Committee) standards.  The value of 8 MHz is
+          appropriate for cable plants running under ETSI
+          standards.  For other regional standards, this
+          object will be modified accordingly."
+
+OBJECT  docsIfDownChannelModulation
+     WRITE-SYNTAX INTEGER {
+                            qam64 (3),
+                            qam256 (4)
+                          }
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfDownChannelInterleave
+     WRITE-SYNTAX INTEGER {
+                 taps8Increment16(3),
+                 taps16Increment8(4),
+                 taps32Increment4(5),
+                 taps64Increment2(6),
+                 taps128Increment1(7),
+                 taps12increment17(8)
+                  }
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfDownChannelPower
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-write in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelFrequency
+     WRITE-SYNTAX Integer32 (5000000..65000000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems.
+          A range of 5MHz to 42MHz is appropriate for a cable
+          plant using a North American Sub-Split channel plan.
+          The spectrum range has been expanded to accommodate
+          an upper edge of 65MHz for some European channel plans.
+          If DOCSIS is extended to cover other types of channel
+          plans (and frequency allocations), this object will
+          be modified accordingly."
+
+OBJECT  docsIfUpChannelWidth
+     WRITE-SYNTAX Integer32 (200000..6400000)
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems,
+          read-only in cable modems.  The above value is appropriate
+          for cable plants running under NTSC (National Television
+          Standards Committee) standards.  If DOCSIS is extended to
+          work with other standards (e.g., European standards), this
+          object will be modified accordingly."
+
+OBJECT  docsIfUpChannelModulationProfile
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelSlotSize
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfUpChannelRangingBackoffStart
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelRangingBackoffEnd
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelTxBackoffStart
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelTxBackoffEnd
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelScdmaActiveCodes
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems.
+          The number of active codes when SCDMA is in use MUST range
+          from 64 to 128 and MUST be a non-Prime value.
+          Providing this range allows for the following features
+          and capabilities:
+             1) Power management in S-CDMA spreader-on frames
+                (with a 3 dB spread).
+
+             2) Avoidance of code 0.
+             3) Flexible mini-slot sizes with and without the use of
+                code 0."
+
+OBJECT  docsIfUpChannelScdmaCodesPerSlot
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelScdmaFrameSize
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelScdmaHoppingSeed
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelCloneFrom
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelUpdate
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfUpChannelStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Read-create in Cable Modem Termination Systems;
+             read-only in Cable Modems.
+             Entries associated to physical interfaces only support
+             the read-only value 'active'."
+
+OBJECT  docsIfUpChannelPreEqEnable
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "Read-create in cable modem termination systems;
+          read-only in cable modems."
+
+OBJECT  docsIfQosProfPriority
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfMaxUpBandwidth
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfGuarUpBandwidth
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfMaxDownBandwidth
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfBaselinePrivacy
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfStatus
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfQosProfMaxTransmitBurst
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "This object is always read-only in cable modems.
+          It is compliant to implement this object as read-only
+          in cable modem termination systems."
+
+OBJECT  docsIfCmRangingTimeout
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmStatusModulationType
+    SYNTAX          INTEGER {
+        unknown(0),
+        tdma(1),
+        atdma(2),
+        scdma(3)
+    }
+     DESCRIPTION
+         "CM does not use both modulation burst profiles of a
+          'tdmAndAtdma' ChannelType; therefore, 'tdmAndAtdma'is
+          not supported."
+
+OBJECT  docsIfCmtsServiceAdminStatus
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsSyncInterval
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsUcdInterval
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsInsertInterval
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsInvitedRangingAttempts
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT  docsIfCmtsQosProfilePermissions
+     WRITE-SYNTAX     BITS {
+         createByManagement(0),
+         updateByManagement(1)
+        }
+     MIN-ACCESS  read-only
+     DESCRIPTION
+         "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsModType
+     WRITE-SYNTAX      INTEGER {
+         qpsk(2),
+         qam16(3),
+         qam64(6)
+     }
+     DESCRIPTION
+         "A management station MAY only set 64QAM, 16QAM, or QPSK
+          modulation for Time or Code division Multiple Access,
+          but others might be possible based on device
+          configuration."
+
+OBJECT docsIfCmtsCmStatusModulationType
+    SYNTAX          INTEGER {
+        unknown(0),
+        tdma(1),
+        atdma(2),
+        scdma(3)
+    }
+     DESCRIPTION
+         "CM does not use both modulation burst profiles of a
+          'tdmAndAtdma' ChannelType; therefore, 'tdmAndAtdma'is
+          not supported."
+     ::= { docsIfCompliances 2 }
+
+docsIfBasicGroup OBJECT-GROUP
+     OBJECTS {
+         docsIfDownChannelId,
+         docsIfDownChannelFrequency,
+         docsIfDownChannelWidth,
+         docsIfDownChannelModulation,
+         docsIfDownChannelInterleave,
+         docsIfDownChannelPower,
+         docsIfUpChannelId,
+         docsIfUpChannelFrequency,
+         docsIfUpChannelWidth,
+         docsIfUpChannelModulationProfile,
+         docsIfUpChannelSlotSize,
+         docsIfUpChannelTxTimingOffset,
+         docsIfUpChannelRangingBackoffStart,
+         docsIfUpChannelRangingBackoffEnd,
+         docsIfUpChannelTxBackoffStart,
+         docsIfUpChannelTxBackoffEnd,
+         docsIfQosProfPriority,
+         docsIfQosProfMaxUpBandwidth,
+         docsIfQosProfGuarUpBandwidth,
+         docsIfQosProfMaxDownBandwidth,
+         docsIfQosProfMaxTxBurst,
+         docsIfQosProfBaselinePrivacy,
+         docsIfQosProfStatus,
+         docsIfSigQIncludesContention,
+         docsIfSigQUnerroreds,
+         docsIfSigQCorrecteds,
+         docsIfSigQUncorrectables,
+         docsIfSigQSignalNoise,
+         docsIfSigQMicroreflections,
+         docsIfSigQEqualizationData
+     }
+     STATUS      deprecated
+     DESCRIPTION
+         "Group of objects implemented in both cable modems and
+          cable modem termination systems."
+     ::= { docsIfGroups 1 }
+
+docsIfCmGroup OBJECT-GROUP
+     OBJECTS {
+         docsIfCmCmtsAddress,
+         docsIfCmCapabilities,
+         docsIfCmRangingTimeout,
+         docsIfCmStatusValue,
+         docsIfCmStatusCode,
+         docsIfCmStatusTxPower,
+         docsIfCmStatusResets,
+         docsIfCmStatusLostSyncs,
+         docsIfCmStatusInvalidMaps,
+         docsIfCmStatusInvalidUcds,
+         docsIfCmStatusInvalidRangingResponses,
+         docsIfCmStatusInvalidRegistrationResponses,
+         docsIfCmStatusT1Timeouts,
+         docsIfCmStatusT2Timeouts,
+         docsIfCmStatusT3Timeouts,
+         docsIfCmStatusT4Timeouts,
+         docsIfCmStatusRangingAborteds,
+         docsIfCmServiceQosProfile,
+         docsIfCmServiceTxSlotsImmed,
+         docsIfCmServiceTxSlotsDed,
+         docsIfCmServiceTxRetries,
+         docsIfCmServiceTxExceededs,
+         docsIfCmServiceRqRetries,
+         docsIfCmServiceRqExceededs
+     }
+     STATUS      deprecated
+     DESCRIPTION
+         "Group of objects implemented in cable modems."
+     ::= { docsIfGroups 2 }
+
+docsIfCmtsGroup OBJECT-GROUP
+     OBJECTS {
+         docsIfCmtsCapabilities,
+         docsIfCmtsSyncInterval,
+         docsIfCmtsUcdInterval,
+         docsIfCmtsMaxServiceIds,
+         docsIfCmtsInvitedRangingAttempts,
+         docsIfCmtsInsertInterval,
+         docsIfCmtsStatusInvalidRangeReqs,
+         docsIfCmtsStatusRangingAborteds,
+         docsIfCmtsStatusInvalidRegReqs,
+         docsIfCmtsStatusFailedRegReqs,
+         docsIfCmtsStatusInvalidDataReqs,
+         docsIfCmtsStatusT5Timeouts,
+         docsIfCmtsCmStatusMacAddress,
+         docsIfCmtsCmStatusIpAddress,
+         docsIfCmtsCmStatusDownChannelIfIndex,
+         docsIfCmtsCmStatusUpChannelIfIndex,
+         docsIfCmtsCmStatusRxPower,
+         docsIfCmtsCmStatusTimingOffset,
+         docsIfCmtsCmStatusEqualizationData,
+         docsIfCmtsCmStatusValue,
+         docsIfCmtsCmStatusUnerroreds,
+         docsIfCmtsCmStatusCorrecteds,
+         docsIfCmtsCmStatusUncorrectables,
+         docsIfCmtsCmStatusSignalNoise,
+         docsIfCmtsCmStatusMicroreflections,
+         docsIfCmtsServiceCmStatusIndex,
+         docsIfCmtsServiceAdminStatus,
+         docsIfCmtsServiceQosProfile,
+         docsIfCmtsServiceCreateTime,
+         docsIfCmtsServiceInOctets,
+         docsIfCmtsServiceInPackets,
+         docsIfCmtsModType,
+         docsIfCmtsModControl,
+         docsIfCmtsModPreambleLen,
+         docsIfCmtsModDifferentialEncoding,
+         docsIfCmtsModFECErrorCorrection,
+         docsIfCmtsModFECCodewordLength,
+         docsIfCmtsModScramblerSeed,
+         docsIfCmtsModMaxBurstSize,
+         docsIfCmtsModGuardTimeSize,
+         docsIfCmtsModLastCodewordShortened,
+         docsIfCmtsModScrambler,
+         docsIfCmtsQosProfilePermissions,
+         docsIfCmtsCmPtr
+     }
+     STATUS      deprecated
+     DESCRIPTION
+         "Group of objects implemented in Cable Modem Termination
+          Systems."
+     ::= { docsIfGroups 3 }
+
+-- obsolete group
+-- RFC 2670 already had a obsolete group, even though RFC2670
+-- was the first version of this MIB Module.
+
+docsIfObsoleteGroup OBJECT-GROUP
+     OBJECTS {
+         docsIfCmRangingRespTimeout,
+         docsIfCmtsInsertionInterval
+     }
+     STATUS      obsolete
+     DESCRIPTION
+         "Group of objects obsoleted."
+     ::= { docsIfGroups 4 }
+
+docsIfBasicGroupV2 OBJECT-GROUP
+     OBJECTS {
+         docsIfDownChannelId,
+         docsIfDownChannelFrequency,
+         docsIfDownChannelWidth,
+         docsIfDownChannelModulation,
+         docsIfDownChannelInterleave,
+         docsIfDownChannelPower,
+         docsIfDownChannelAnnex,
+         docsIfUpChannelId,
+         docsIfUpChannelFrequency,
+         docsIfUpChannelWidth,
+         docsIfUpChannelModulationProfile,
+         docsIfUpChannelSlotSize,
+         docsIfUpChannelTxTimingOffset,
+         docsIfUpChannelRangingBackoffStart,
+         docsIfUpChannelRangingBackoffEnd,
+         docsIfUpChannelTxBackoffStart,
+         docsIfUpChannelTxBackoffEnd,
+         docsIfUpChannelScdmaActiveCodes,
+         docsIfUpChannelScdmaCodesPerSlot,
+         docsIfUpChannelScdmaFrameSize,
+         docsIfUpChannelScdmaHoppingSeed,
+         docsIfUpChannelType,
+         docsIfUpChannelCloneFrom,
+         docsIfUpChannelUpdate,
+         docsIfUpChannelStatus,
+         docsIfUpChannelPreEqEnable,
+         docsIfQosProfPriority,
+         docsIfQosProfMaxUpBandwidth,
+         docsIfQosProfGuarUpBandwidth,
+         docsIfQosProfMaxDownBandwidth,
+         docsIfQosProfBaselinePrivacy,
+         docsIfQosProfStatus,
+         docsIfQosProfMaxTransmitBurst,
+         docsIfSigQIncludesContention,
+         docsIfSigQUnerroreds,
+         docsIfSigQCorrecteds,
+         docsIfSigQUncorrectables,
+         docsIfSigQSignalNoise,
+         docsIfSigQMicroreflections,
+         docsIfSigQExtUnerroreds,
+         docsIfSigQExtCorrecteds,
+         docsIfSigQExtUncorrectables,
+         docsIfDocsisBaseCapability
+     }
+     STATUS      current
+     DESCRIPTION
+         "Group of objects implemented in both cable modems and
+          cable modem termination systems."
+     ::= { docsIfGroups 5 }
+
+docsIfCmGroupV2 OBJECT-GROUP
+     OBJECTS {
+         docsIfCmCmtsAddress,
+         docsIfCmCapabilities,
+         docsIfCmRangingTimeout,
+         docsIfCmStatusValue,
+         docsIfCmStatusCode,
+         docsIfCmStatusTxPower,
+         docsIfCmStatusResets,
+         docsIfCmStatusLostSyncs,
+         docsIfCmStatusInvalidMaps,
+         docsIfCmStatusInvalidUcds,
+         docsIfCmStatusInvalidRangingResponses,
+         docsIfCmStatusInvalidRegistrationResponses,
+         docsIfCmStatusT1Timeouts,
+         docsIfCmStatusT2Timeouts,
+         docsIfCmStatusT3Timeouts,
+         docsIfCmStatusT4Timeouts,
+         docsIfCmStatusRangingAborteds,
+         docsIfCmStatusDocsisOperMode,
+         docsIfCmStatusModulationType,
+         docsIfCmStatusEqualizationData,
+         docsIfCmStatusUCCs,
+         docsIfCmStatusUCCFails,
+         docsIfCmServiceQosProfile,
+         docsIfCmServiceTxSlotsImmed,
+         docsIfCmServiceTxSlotsDed,
+         docsIfCmServiceTxRetries,
+         docsIfCmServiceTxExceededs,
+         docsIfCmServiceRqRetries,
+         docsIfCmServiceRqExceededs,
+         docsIfCmServiceExtTxSlotsImmed,
+         docsIfCmServiceExtTxSlotsDed,
+         docsIfSigQEqualizationData
+     }
+     STATUS      current
+     DESCRIPTION
+         "Group of objects implemented in cable modems."
+     ::= { docsIfGroups 6 }
+
+docsIfCmtsGroupV2 OBJECT-GROUP
+     OBJECTS {
+         docsIfCmtsCapabilities,
+         docsIfCmtsSyncInterval,
+         docsIfCmtsUcdInterval,
+         docsIfCmtsMaxServiceIds,
+         docsIfCmtsInvitedRangingAttempts,
+         docsIfCmtsInsertInterval,
+         docsIfCmtsMacStorageType,
+         docsIfCmtsStatusInvalidRangeReqs,
+         docsIfCmtsStatusRangingAborteds,
+         docsIfCmtsStatusInvalidRegReqs,
+         docsIfCmtsStatusFailedRegReqs,
+         docsIfCmtsStatusInvalidDataReqs,
+         docsIfCmtsStatusT5Timeouts,
+         docsIfCmtsCmStatusMacAddress,
+         docsIfCmtsCmStatusDownChannelIfIndex,
+         docsIfCmtsCmStatusUpChannelIfIndex,
+         docsIfCmtsCmStatusRxPower,
+         docsIfCmtsCmStatusTimingOffset,
+         docsIfCmtsCmStatusEqualizationData,
+         docsIfCmtsCmStatusValue,
+         docsIfCmtsCmStatusUnerroreds,
+         docsIfCmtsCmStatusCorrecteds,
+         docsIfCmtsCmStatusUncorrectables,
+         docsIfCmtsCmStatusSignalNoise,
+         docsIfCmtsCmStatusMicroreflections,
+         docsIfCmtsCmStatusExtUnerroreds,
+         docsIfCmtsCmStatusExtCorrecteds,
+         docsIfCmtsCmStatusExtUncorrectables,
+         docsIfCmtsCmStatusDocsisRegMode,
+         docsIfCmtsCmStatusModulationType,
+         docsIfCmtsCmStatusInetAddressType,
+         docsIfCmtsCmStatusInetAddress,
+         docsIfCmtsCmStatusValueLastUpdate,
+         docsIfCmtsCmStatusHighResolutionTimingOffset,
+         docsIfCmtsServiceAdminStatus,
+         docsIfCmtsServiceQosProfile,
+         docsIfCmtsServiceCreateTime,
+         docsIfCmtsServiceInOctets,
+         docsIfCmtsServiceInPackets,
+         docsIfCmtsServiceNewCmStatusIndex,
+         docsIfCmtsModType,
+         docsIfCmtsModControl,
+         docsIfCmtsModPreambleLen,
+         docsIfCmtsModDifferentialEncoding,
+         docsIfCmtsModFECErrorCorrection,
+         docsIfCmtsModFECCodewordLength,
+         docsIfCmtsModScramblerSeed,
+         docsIfCmtsModMaxBurstSize,
+         docsIfCmtsModGuardTimeSize,
+         docsIfCmtsModLastCodewordShortened,
+         docsIfCmtsModScrambler,
+         docsIfCmtsModByteInterleaverDepth,
+         docsIfCmtsModByteInterleaverBlockSize,
+         docsIfCmtsModPreambleType,
+         docsIfCmtsModTcmErrorCorrectionOn,
+         docsIfCmtsModScdmaInterleaverStepSize,
+         docsIfCmtsModScdmaSpreaderEnable,
+         docsIfCmtsModScdmaSubframeCodes,
+         docsIfCmtsModChannelType,
+         docsIfCmtsModStorageType,
+         docsIfCmtsQosProfilePermissions,
+         docsIfCmtsCmPtr,
+         docsIfCmtsChannelUtilizationInterval,
+         docsIfCmtsChannelUtUtilization,
+         docsIfCmtsDownChnlCtrId,
+         docsIfCmtsDownChnlCtrTotalBytes,
+         docsIfCmtsDownChnlCtrUsedBytes,
+         docsIfCmtsDownChnlCtrExtTotalBytes,
+         docsIfCmtsDownChnlCtrExtUsedBytes,
+         docsIfCmtsUpChnlCtrId,
+         docsIfCmtsUpChnlCtrTotalMslots,
+         docsIfCmtsUpChnlCtrUcastGrantedMslots,
+         docsIfCmtsUpChnlCtrTotalCntnMslots,
+         docsIfCmtsUpChnlCtrUsedCntnMslots,
+         docsIfCmtsUpChnlCtrExtTotalMslots,
+         docsIfCmtsUpChnlCtrExtUcastGrantedMslots,
+         docsIfCmtsUpChnlCtrExtTotalCntnMslots,
+         docsIfCmtsUpChnlCtrExtUsedCntnMslots,
+         docsIfCmtsUpChnlCtrCollCntnMslots,
+         docsIfCmtsUpChnlCtrTotalCntnReqMslots,
+         docsIfCmtsUpChnlCtrUsedCntnReqMslots,
+         docsIfCmtsUpChnlCtrCollCntnReqMslots,
+         docsIfCmtsUpChnlCtrTotalCntnReqDataMslots,
+         docsIfCmtsUpChnlCtrUsedCntnReqDataMslots,
+         docsIfCmtsUpChnlCtrCollCntnReqDataMslots,
+         docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots,
+         docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots,
+         docsIfCmtsUpChnlCtrCollCntnInitMaintMslots,
+         docsIfCmtsUpChnlCtrExtCollCntnMslots,
+         docsIfCmtsUpChnlCtrExtTotalCntnReqMslots,
+         docsIfCmtsUpChnlCtrExtUsedCntnReqMslots,
+         docsIfCmtsUpChnlCtrExtCollCntnReqMslots,
+         docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots,
+         docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots,
+         docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots,
+         docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots,
+         docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots,
+         docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots,
+         docsIfDownChannelStorageType,
+         docsIfQosProfStorageType
+
+     }
+     STATUS      current
+     DESCRIPTION
+         "Group of objects implemented in Cable Modem Termination
+          Systems."
+     ::= { docsIfGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/DOT12-IF-MIB.mib b/snmp_builder/mibs/DOT12-IF-MIB.mib
new file mode 100644
index 0000000..c61d86f
--- /dev/null
+++ b/snmp_builder/mibs/DOT12-IF-MIB.mib
@@ -0,0 +1,772 @@
+DOT12-IF-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        transmission, Counter32, Counter64, OBJECT-TYPE,
+        MODULE-IDENTITY
+            FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP
+            FROM SNMPv2-CONF
+        ifIndex
+            FROM IF-MIB;
+
+    dot12MIB MODULE-IDENTITY
+         LAST-UPDATED "9602220452Z"  -- February 22, 1996
+         ORGANIZATION "IETF 100VG-AnyLAN MIB Working Group"
+         CONTACT-INFO
+                 "       John Flick
+
+                 Postal: Hewlett Packard Company
+                         8000 Foothills Blvd. M/S 5556
+                         Roseville, CA 95747-5556
+                 Tel:    +1 916 785 4018
+                 Fax:    +1 916 785 3583
+
+                 E-mail: johnf@hprnd.rose.hp.com"
+         DESCRIPTION
+                 "This MIB module describes objects for
+                 managing IEEE 802.12 interfaces."
+         ::= { transmission 45 }
+
+    dot12MIBObjects     OBJECT IDENTIFIER ::= { dot12MIB 1 }
+
+    dot12ConfigTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF Dot12ConfigEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Configuration information for a collection of
+                802.12 interfaces attached to a particular
+                system."
+        ::= { dot12MIBObjects 1 }
+
+    dot12ConfigEntry OBJECT-TYPE
+        SYNTAX     Dot12ConfigEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Configuration for a particular interface to an
+                802.12 medium."
+        INDEX      { ifIndex }
+        ::= { dot12ConfigTable 1 }
+
+    Dot12ConfigEntry ::=
+        SEQUENCE {
+            dot12CurrentFramingType         INTEGER,
+            dot12DesiredFramingType         INTEGER,
+            dot12FramingCapability          INTEGER,
+            dot12DesiredPromiscStatus       INTEGER,
+            dot12TrainingVersion            INTEGER,
+            dot12LastTrainingConfig         OCTET STRING,
+            dot12Commands                   INTEGER,
+            dot12Status                     INTEGER,
+            dot12ControlMode                INTEGER
+        }
+
+    dot12CurrentFramingType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       frameType88023(1),
+                       frameType88025(2),
+                       frameTypeUnknown(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "When dot12DesiredFramingType is one of
+                'frameType88023' or 'frameType88025', this is the
+                type of framing asserted by the interface.
+
+                When dot12DesiredFramingType is 'frameTypeEither',
+                dot12CurrentFramingType shall be one of
+                'frameType88023' or 'frameType88025' when the
+                dot12Status is 'opened'.   When the dot12Status is
+                anything other than 'opened',
+                dot12CurrentFramingType shall take the value of
+                'frameTypeUnknown'."
+        ::= { dot12ConfigEntry 1 }
+
+    dot12DesiredFramingType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       frameType88023(1),
+                       frameType88025(2),
+                       frameTypeEither(3)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "The type of framing which will be requested by
+                the interface during the next interface MAC
+                initialization or open action.
+
+                In master mode, this is the framing mode which
+                will be granted by the interface.  Note that
+                for a master mode interface, this object must be
+                equal to 'frameType88023' or 'frameType88025',
+                since a master mode interface cannot grant
+                'frameTypeEither'."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aDesiredFramingType."
+        ::= { dot12ConfigEntry 2 }
+
+    dot12FramingCapability OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       frameType88023(1),
+                       frameType88025(2),
+                       frameTypeEither(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The type of framing this interface is capable of
+                supporting."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aFramingCapability."
+        ::= { dot12ConfigEntry 3 }
+
+    dot12DesiredPromiscStatus OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       singleAddressMode(1),
+                       promiscuousMode(2)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "This object is used to select the promiscuous
+                mode that this interface will request in the next
+                training packet issued on this interface.
+                Whether the repeater grants the requested mode
+                must be verified by examining the state of the PP
+                bits in the corresponding instance of
+                dot12LastTrainingConfig.
+
+                In master mode, this object controls whether or
+                not promiscuous mode will be granted by the
+                interface when requested by the lower level
+                device.
+
+                Note that this object indicates the desired mode
+                for the next time the interface trains.  The
+                currently active mode will be reflected in
+                dot12LastTrainingConfig and in ifPromiscuousMode."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aDesiredPromiscuousStatus."
+        ::= { dot12ConfigEntry 4 }
+
+    dot12TrainingVersion OBJECT-TYPE
+        SYNTAX     INTEGER (0..7)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The value that will be used in the version bits
+                (vvv bits) in training frames on this interface.
+                This is the highest version number supported by
+                this MAC."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aMACVersion."
+        ::= { dot12ConfigEntry 5 }
+
+    dot12LastTrainingConfig OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(2))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This 16 bit field contains the configuration
+                bits from the most recent error-free training
+                frame received during training on this interface.
+                Training request frames are received when in
+                master mode, while training response frames are
+                received in slave mode.  On master mode interfaces,
+                this object contains the contents of the
+                requested configuration field of the most recent
+                training request frame.  On slave mode interfaces,
+                this object contains the contents of the allowed
+                configuration field of the most recent training
+                response frame.  The format of the current version
+                of this field is described in section 3.8.  Please
+                refer to the most recent version of the IEEE
+                802.12 standard for the most up-to-date definition
+
+                of the format of this object."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aLastTrainingConfig."
+        ::= { dot12ConfigEntry 6 }
+
+    dot12Commands OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       noOp(1),
+                       open(2),
+                       reset(3),
+                       close(4)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "If the current value of dot12Status is 'closed',
+                setting the value of this object to 'open' will
+                change the corresponding instance of MIB-II's
+                ifAdminStatus to 'up', cause this interface to
+                enter the 'opening' state, and will cause training
+                to be initiated on this interface.  The progress
+                and success of the open is given by the values of
+                the dot12Status object.  Setting this object to
+                'open' when dot12Status has a value other than
+                'closed' has no effect.
+
+                Setting the corresponding instance of ifAdminStatus
+                to 'up' when the current value of dot12Status is
+                'closed' will have the same effect as setting this
+                object to 'open'.  Setting ifAdminStatus to 'up'
+                when dot12Status has a value other than 'closed'
+                has no effect.
+
+                Setting the value of this object to 'close' will
+                move this interface into the 'closed' state and
+                cause all transmit and receive actions to stop.
+                This object will then have to be set to 'open' in
+                order to reinitiate training.
+
+                Setting the corresponding instance of ifAdminStatus
+                to 'down' will have the same effect as setting this
+                object to 'close'.
+
+                Setting the value of this object to 'reset' when
+                the current value of dot12Status has a value other
+                than 'closed' will reset the interface.  On a
+                reset, all MIB counters should retain their values.
+
+                This will cause the MAC to initiate an
+                acInitializeMAC action as specified in IEEE 802.12.
+                This will cause training to be reinitiated on this
+                interface.  Setting this object to 'reset' when
+                dot12Status has a value of 'closed' has no effect.
+                Setting this object to 'reset' has no effect on the
+                corresponding instance of ifAdminStatus.
+
+                Setting the value of this object to 'noOp' has no
+                effect.
+
+                When read, this object will always have a value
+                of 'noOp'."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.2,
+                acOpen, acClose, acInitializeMAC.
+                Also, RFC1231 IEEE802.5 Token Ring MIB,
+                dot5Commands."
+        ::= { dot12ConfigEntry 7 }
+
+    dot12Status OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       opened(1),
+                       closed(2),
+                       opening(3),
+                       openFailure(5),
+                       linkFailure(6)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The current interface status with respect to
+                training.  One of the following values:
+
+                    opened      - Training has completed
+                                  successfully.
+                    closed      - MAC has been disabled by
+                                  setting dot12Commands to
+                                  'close'.
+                    opening     - MAC is in training.  Training
+                                  signals have been received.
+                    openFailure - Passed 24 error-free packets,
+                                  but there is a problem, noted
+                                  in the training configuration
+                                  bits (dot12LastTrainingConfig).
+                    linkFailure - Training signals not received,
+                                  or could not pass 24 error-free
+                                  packets.
+
+                Whenever the dot12Commands object is set to
+                'close' or ifAdminStatus is set to 'down', the MAC
+                will go silent, dot12Status will be 'closed', and
+                ifOperStatus will be 'down'.
+
+                When the value of this object is equal to 'closed'
+                and the dot12Commands object is set to 'open' or
+                the ifAdminStatus object is set to 'up', training
+                will be initiated on this interface.  When the
+                value of this object is not equal to 'closed' and
+                the dot12Commands object is set to 'reset',
+                training will be reinitiated on this interface.
+                Note that sets of some other objects (e.g.
+                dot12ControlMode) or external events (e.g. MAC
+                protocol violations) may also cause training to be
+                reinitiated on this interface.
+
+                When training is initiated or reinitiated on an
+                interface, the end node will send Training_Up to
+                the master and initially go to the 'linkFailure'
+                state and ifOperStatus will go to 'down'.
+                When the master sends back Training_Down,
+                dot12Status will change to the 'opening' state,
+                and training packets will be transferred.
+
+                After all of the training packets have been
+                passed, dot12Status will change to 'linkFailure'
+                if 24 consecutive error-free packets were not
+                passed, 'opened' if 24 consecutive error-free
+                packets were passed and the training
+                configuration bits were OK, or 'openFailure' if
+                there were 24 consecutive error-free packets, but
+                there was a problem with the training
+                configuration bits.
+
+                When in the 'openFailure' state, the
+                dot12LastTrainingConfig object will contain the
+                configuration bits from the last training
+                packet which can be examined to determine the
+                exact reason for the training configuration
+                failure.
+
+                If training did not succeed (dot12Status is
+                'linkFailure' or 'openFailure), the entire
+                process will be restarted after
+                MAC_Retraining_Delay_Timer seconds.
+
+                If training does succeed (dot12Status changes to
+
+                'opened'), ifOperStatus will change to 'up'.  If
+                training does not succeed (dot12Status changes to
+                'linkFailure' or 'openFailure'), ifOperStatus will
+                remain 'down'."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aMACStatus."
+        ::= { dot12ConfigEntry 8 }
+
+    dot12ControlMode OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       masterMode(1),
+                       slaveMode(2),
+                       learn(3)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "This object is used to configure and report
+                whether or not this interface is operating in
+                master mode.  In a Demand Priority network, end
+                node interfaces typically operate in slave mode,
+                while switch interfaces may control the Demand
+                Priority protocol and operate in master mode.
+
+                This object may be implemented as a read-only
+                object by those agents and interfaces that do not
+                implement software control of master mode.  In
+                particular, interfaces that cannot operate in
+                master mode, and interfaces on which master mode
+                is controlled by a pushbutton on the device,
+                should implement this object read-only.
+
+                Some interfaces do not require network management
+                configuration of this feature and can autosense
+                whether to use master mode or slave mode.  The
+                value 'learn' is used for that purpose.  While
+                autosense is taking place, the value 'learn' is
+                returned.
+
+                A network management operation which modifies the
+                value of dot12ControlMode causes the interface
+                to retrain."
+        ::= { dot12ConfigEntry 9 }
+
+    dot12StatTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF Dot12StatEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Statistics for a collection of 802.12 interfaces
+                attached to a particular system."
+        ::= { dot12MIBObjects 2 }
+
+    dot12StatEntry OBJECT-TYPE
+        SYNTAX     Dot12StatEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Statistics for a particular interface to an
+                802.12 medium.  The receive statistics in this
+                table apply only to packets received by this
+                station (i.e., packets whose destination address
+                is either the local station address, the
+                broadcast address, or a multicast address that
+                this station is receiving, unless the station is
+                in promiscuous mode)."
+        INDEX      { ifIndex }
+        ::= { dot12StatTable 1 }
+
+    Dot12StatEntry ::=
+        SEQUENCE {
+            dot12InHighPriorityFrames       Counter32,
+            dot12InHighPriorityOctets       Counter32,
+            dot12InNormPriorityFrames       Counter32,
+            dot12InNormPriorityOctets       Counter32,
+            dot12InIPMErrors                Counter32,
+            dot12InOversizeFrameErrors      Counter32,
+            dot12InDataErrors               Counter32,
+            dot12InNullAddressedFrames      Counter32,
+            dot12OutHighPriorityFrames      Counter32,
+            dot12OutHighPriorityOctets      Counter32,
+            dot12TransitionIntoTrainings    Counter32,
+            dot12HCInHighPriorityOctets     Counter64,
+            dot12HCInNormPriorityOctets     Counter64,
+            dot12HCOutHighPriorityOctets    Counter64
+        }
+
+    dot12InHighPriorityFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of high priority frames
+                that have been received on this interface.
+                Includes both good and bad high priority frames,
+                as well as high priority training frames.  Does
+                not include normal priority frames which were
+                priority promoted."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aHighPriorityFramesReceived."
+        ::= { dot12StatEntry 1 }
+
+    dot12InHighPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in high priority frames that have been
+                received on this interface. This counter is
+                incremented by OctetCount for each frame received
+                on this interface which is counted by
+                dot12InHighPriorityFrames.
+
+                Note that this counter will roll over very
+                quickly.  It is provided for backward
+                compatibility for Network Management protocols
+                that do not support 64 bit counters (e.g. SNMP
+                version 1)."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aHighPriorityOctetsReceived."
+        ::= { dot12StatEntry 2 }
+
+    dot12InNormPriorityFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of normal priority frames
+                that have been received on this interface.
+                Includes both good and bad normal priority
+                frames, as well as normal priority training
+                frames and normal priority frames which were
+                priority promoted."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aNormalPriorityFramesReceived."
+        ::= { dot12StatEntry 3 }
+
+    dot12InNormPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in normal priority frames that have
+                been received on this interface. This counter is
+                incremented by OctetCount for each frame received
+                on this interface which is counted by
+                dot12InNormPriorityFrames.
+
+                Note that this counter will roll over very
+                quickly.  It is provided for backward
+                compatibility for Network Management protocols
+                that do not support 64 bit counters (e.g. SNMP
+                version 1)."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aNormalPriorityOctetsReceived."
+        ::= { dot12StatEntry 4 }
+
+    dot12InIPMErrors OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of frames
+                that have been received on this interface with an
+                invalid packet marker and no PMI errors.  A
+                repeater will write an invalid packet marker to
+                the end of a frame containing errors as it is
+                forwarded through the repeater to the other
+                ports.  This counter is incremented by one for
+                each frame received on this interface which has
+                had an invalid packet marker added to the end of
+                the frame."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aIPMFramesReceived."
+        ::= { dot12StatEntry 5 }
+
+    dot12InOversizeFrameErrors OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of oversize frames
+                received on this interface.  This counter is
+                incremented by one for each frame received on
+
+                this interface whose OctetCount is larger than
+                the maximum legal frame size.  The frame size
+                which causes this counter to increment is
+                dependent on the current framing type."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aOversizeFramesReceived."
+        ::= { dot12StatEntry 6 }
+
+    dot12InDataErrors OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of errored frames
+                received on this interface.  This counter is
+                incremented by one for each frame received on
+                this interface with any of the following errors:
+                bad FCS (with no IPM), PMI errors (excluding
+                frames with an IPM as the only PMI error),
+                undersize, bad start of frame delimiter, or bad
+                end of packet marker.  Does not include frames
+                counted by dot12InIPMErrors,
+                dot12InNullAddressedFrames, or
+                dot12InOversizeFrameErrors.
+
+                This counter indicates problems with the cable
+                directly attached to this interface, while
+                dot12InIPMErrors indicates problems with remote
+                cables."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aDataErrorFramesReceived."
+        ::= { dot12StatEntry 7 }
+
+    dot12InNullAddressedFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of null addressed frames
+                received on this interface.  This counter is
+                incremented by one for each frame received on
+                this interface with a destination MAC address
+                consisting of all zero bits.  Both void and
+                training frames are included in this counter.
+
+                Note that since this station would normally not
+
+                receive null addressed frames, this counter is
+                only incremented when this station is operating
+                in promiscuous mode or in training."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aNullAddressedFramesReceived."
+        ::= { dot12StatEntry 8 }
+
+    dot12OutHighPriorityFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter is incremented by one for each high
+                priority frame successfully transmitted out this
+                interface."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aHighPriorityFramesTransmitted."
+        ::= { dot12StatEntry 9 }
+
+    dot12OutHighPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter is incremented by OctetCount for
+                each frame counted by dot12OutHighPriorityFrames.
+
+                Note that this counter will roll over very
+                quickly.  It is provided for backward
+                compatibility for Network Management protocols
+                that do not support 64 bit counters (e.g. SNMP
+                version 1)."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aHighPriorityOctetsTransmitted."
+        ::= { dot12StatEntry 10 }
+
+    dot12TransitionIntoTrainings OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of times
+                this interface has entered the training state.
+                This counter is incremented by one each time
+                dot12Status transitions to 'linkFailure' from any
+
+                state other than 'opening' or 'openFailure'."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aTransitionsIntoTraining."
+        ::= { dot12StatEntry 11 }
+
+    dot12HCInHighPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in high priority frames that have been
+                received on this interface. This counter is
+                incremented by OctetCount for each frame received
+                on this interface which is counted by
+                dot12InHighPriorityFrames.
+
+                This counter is a 64 bit version of
+                dot12InHighPriorityOctets.  It should be used by
+                Network Management protocols which support 64 bit
+                counters (e.g. SNMPv2)."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aHighPriorityOctetsReceived."
+        ::= { dot12StatEntry 12 }
+
+    dot12HCInNormPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in normal priority frames that have
+                been received on this interface. This counter is
+                incremented by OctetCount for each frame received
+                on this interface which is counted by
+                dot12InNormPriorityFrames.
+
+                This counter is a 64 bit version of
+                dot12InNormPriorityOctets.  It should be used by
+                Network Management protocols which support 64 bit
+                counters (e.g. SNMPv2)."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aNormalPriorityOctetsReceived."
+        ::= { dot12StatEntry 13 }
+
+    dot12HCOutHighPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter is incremented by OctetCount for
+                each frame counted by dot12OutHighPriorityFrames.
+
+                This counter is a 64 bit version of
+                dot12OutHighPriorityOctets.  It should be used by
+                Network Management protocols which support 64 bit
+                counters (e.g. SNMPv2)."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.5.2.1,
+                aHighPriorityOctetsTransmitted."
+       ::= { dot12StatEntry 14 }
+
+    -- conformance information
+
+    dot12Conformance  OBJECT IDENTIFIER ::= { dot12MIB 2 }
+
+    dot12Compliances  OBJECT IDENTIFIER ::= { dot12Conformance 1 }
+    dot12Groups       OBJECT IDENTIFIER ::= { dot12Conformance 2 }
+
+    -- compliance statements
+
+    dot12Compliance MODULE-COMPLIANCE
+        STATUS     current
+        DESCRIPTION
+                   "The compliance statement for managed network
+                   entities that have 802.12 interfaces."
+
+        MODULE  -- this module
+            MANDATORY-GROUPS { dot12ConfigGroup, dot12StatsGroup }
+
+            OBJECT       dot12DesiredFramingType
+            MIN-ACCESS   read-only
+            DESCRIPTION
+                   "Write access to this object is not required."
+
+            OBJECT       dot12DesiredPromiscStatus
+            MIN-ACCESS   read-only
+            DESCRIPTION
+                   "Write access to this object is not required."
+
+            OBJECT       dot12Commands
+            MIN-ACCESS   read-only
+            DESCRIPTION
+                   "Write access to this object is not required."
+
+            OBJECT       dot12ControlMode
+            MIN-ACCESS   read-only
+            DESCRIPTION
+                   "Write access to this object is not required."
+        ::= { dot12Compliances 1 }
+
+    -- units of conformance
+
+    dot12ConfigGroup OBJECT-GROUP
+        OBJECTS    { dot12DesiredFramingType,
+                     dot12FramingCapability,
+                     dot12DesiredPromiscStatus,
+                     dot12TrainingVersion,
+                     dot12LastTrainingConfig,
+                     dot12Commands, dot12Status,
+                     dot12CurrentFramingType,
+                     dot12ControlMode }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects for managing the status
+                and configuration of IEEE 802.12 interfaces."
+        ::= { dot12Groups 1 }
+
+    dot12StatsGroup OBJECT-GROUP
+        OBJECTS    { dot12InHighPriorityFrames,
+                     dot12InHighPriorityOctets,
+                     dot12InNormPriorityFrames,
+                     dot12InNormPriorityOctets,
+                     dot12InIPMErrors,
+                     dot12InOversizeFrameErrors,
+                     dot12InDataErrors,
+                     dot12InNullAddressedFrames,
+                     dot12OutHighPriorityFrames,
+                     dot12OutHighPriorityOctets,
+                     dot12TransitionIntoTrainings,
+                     dot12HCInHighPriorityOctets,
+                     dot12HCInNormPriorityOctets,
+                     dot12HCOutHighPriorityOctets }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects providing statistics for
+                IEEE 802.12 interfaces."
+        ::= { dot12Groups 2 }
+
+END
diff --git a/snmp_builder/mibs/DOT12-RPTR-MIB.mib b/snmp_builder/mibs/DOT12-RPTR-MIB.mib
new file mode 100644
index 0000000..7d6ec36
--- /dev/null
+++ b/snmp_builder/mibs/DOT12-RPTR-MIB.mib
@@ -0,0 +1,1978 @@
+DOT12-RPTR-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        mib-2, Integer32, Counter32, Counter64,
+        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+            FROM SNMPv2-SMI
+        MacAddress, TruthValue, TimeStamp
+            FROM SNMPv2-TC
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+            FROM SNMPv2-CONF;
+
+    vgRptrMIB MODULE-IDENTITY
+         LAST-UPDATED "9705192256Z"  -- May 19, 1997
+         ORGANIZATION "IETF 100VG-AnyLAN Working Group"
+         CONTACT-INFO
+                 "WG E-mail: vgmib@hprnd.rose.hp.com
+
+                      Chair: Jeff Johnson
+                     Postal: RedBack Networks
+                             2570 North First Street, Suite 410
+                             San Jose, CA  95131
+                        Tel: +1 408 571 2699
+                        Fax: +1 408 571 2698
+                     E-mail: jeff@redbacknetworks.com
+
+                     Editor: John Flick
+                     Postal: Hewlett Packard Company
+                             8000 Foothills Blvd. M/S 5556
+                             Roseville, CA 95747-5556
+                        Tel: +1 916 785 4018
+                        Fax: +1 916 785 3583
+                     E-mail: johnf@hprnd.rose.hp.com"
+         DESCRIPTION
+                 "This MIB module describes objects for managing
+                 IEEE 802.12 repeaters."
+         ::= { mib-2 53 }
+
+    vgRptrObjects      OBJECT IDENTIFIER ::= { vgRptrMIB 1 }
+    vgRptrBasic        OBJECT IDENTIFIER ::= { vgRptrObjects 1 }
+    vgRptrBasicRptr    OBJECT IDENTIFIER ::= { vgRptrBasic 1 }
+
+    vgRptrInfoTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF VgRptrInfoEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "A table of information about each 802.12 repeater
+                in the managed system."
+        ::= { vgRptrBasicRptr 1 }
+
+    vgRptrInfoEntry OBJECT-TYPE
+        SYNTAX     VgRptrInfoEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "An entry in the table, containing information
+                about a single repeater."
+        INDEX      { vgRptrInfoIndex }
+        ::= { vgRptrInfoTable 1 }
+
+    VgRptrInfoEntry ::=
+        SEQUENCE {
+            vgRptrInfoIndex                 Integer32,
+            vgRptrInfoMACAddress            MacAddress,
+            vgRptrInfoCurrentFramingType    INTEGER,
+            vgRptrInfoDesiredFramingType    INTEGER,
+            vgRptrInfoFramingCapability     INTEGER,
+            vgRptrInfoTrainingVersion       INTEGER,
+            vgRptrInfoOperStatus            INTEGER,
+            vgRptrInfoReset                 INTEGER,
+            vgRptrInfoLastChange            TimeStamp
+        }
+
+    vgRptrInfoIndex OBJECT-TYPE
+        SYNTAX     Integer32 (1..2147483647)
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "A unique identifier for the repeater for which
+                this entry contains information.  The numbering
+                scheme for repeaters is implementation specific."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aRepeaterID."
+        ::= { vgRptrInfoEntry 1 }
+
+    vgRptrInfoMACAddress OBJECT-TYPE
+        SYNTAX     MacAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The MAC address used by the repeater when it
+                initiates training on the uplink port.  Repeaters
+                are allowed to train with an assigned MAC address
+
+                or a null (all zeroes) MAC address."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aMACAddress."
+        ::= { vgRptrInfoEntry 2 }
+
+    vgRptrInfoCurrentFramingType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       frameType88023(1),
+                       frameType88025(2)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The type of framing (802.3 or 802.5) currently
+                in use by the repeater."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aCurrentFramingType."
+        ::= { vgRptrInfoEntry 3 }
+
+    vgRptrInfoDesiredFramingType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       frameType88023(1),
+                       frameType88025(2)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "The type of framing which will be used by the
+                repeater after the next time it is reset.
+
+                The value of this object should be preserved
+                across repeater resets and power failures."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aDesiredFramingType."
+        ::= { vgRptrInfoEntry 4 }
+
+    vgRptrInfoFramingCapability OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       frameType88023(1),
+                       frameType88025(2),
+                       frameTypeEither(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The type of framing this repeater is capable of
+                supporting."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aFramingCapability."
+        ::= { vgRptrInfoEntry 5 }
+
+    vgRptrInfoTrainingVersion OBJECT-TYPE
+        SYNTAX     INTEGER (0..7)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The highest version bits (vvv bits) supported by
+                the repeater during training."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aRMACVersion."
+        ::= { vgRptrInfoEntry 6 }
+
+    vgRptrInfoOperStatus OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       other(1),
+                       ok(2),
+                       generalFailure(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The vgRptrInfoOperStatus object indicates the
+                operational state of the repeater."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.1,
+                aRepeaterHealthState."
+        ::= { vgRptrInfoEntry 7 }
+
+    vgRptrInfoReset OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       noReset(1),
+                       reset(2)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Setting this object to reset(2) causes the
+                repeater to transition to its initial state as
+                specified in clause 12 [IEEE Std 802.12].
+
+                Setting this object to noReset(1) has no effect.
+                The agent will always return the value noReset(1)
+                when this object is read.
+
+                After receiving a request to set this variable to
+                reset(2), the agent is allowed to delay the reset
+                for a short period.  For example, the implementor
+                may choose to delay the reset long enough to
+                allow the SNMP response to be transmitted.  In
+                any event, the SNMP response must be transmitted.
+
+                This action does not reset the management
+                counters defined in this document nor does it
+                affect the vgRptrPortAdminStatus parameters.
+                Included in this action is the execution of a
+                disruptive Self-Test with the following
+                characteristics:
+
+                    1) The nature of the tests is not specified.
+                    2) The test resets the repeater but without
+                       affecting configurable management
+                       information about the repeater.
+                    3) Packets received during the test may or
+                       may not be transferred.
+                    4) The test does not interfere with
+                       management functions.
+
+                After performing this self-test, the agent will
+                update the repeater health information (including
+                vgRptrInfoOperStatus), and send a
+                vgRptrResetEvent."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.2.2,
+                acResetRepeater."
+        ::= { vgRptrInfoEntry 8 }
+
+    vgRptrInfoLastChange OBJECT-TYPE
+        SYNTAX     TimeStamp
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The value of sysUpTime when any of the following
+                conditions occurred:
+
+                    1) agent cold- or warm-started;
+                    2) this instance of repeater was created
+                       (such as when a device or module was
+                       added to the system);
+
+                    3) a change in the value of
+                       vgRptrInfoOperStatus;
+                    4) ports were added or removed as members of
+                       the repeater; or
+                    5) any of the counters associated with this
+                       repeater had a discontinuity."
+        ::= { vgRptrInfoEntry 9 }
+
+    vgRptrBasicGroup  OBJECT IDENTIFIER ::= { vgRptrBasic 2 }
+
+    vgRptrBasicGroupTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF VgRptrBasicGroupEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "A table containing information about groups of
+                ports."
+        ::= { vgRptrBasicGroup 1 }
+
+    vgRptrBasicGroupEntry OBJECT-TYPE
+        SYNTAX     VgRptrBasicGroupEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "An entry in the vgRptrBasicGroupTable, containing
+                information about a single group of ports."
+        INDEX      { vgRptrGroupIndex }
+        ::= { vgRptrBasicGroupTable 1 }
+
+    VgRptrBasicGroupEntry ::=
+        SEQUENCE {
+            vgRptrGroupIndex                Integer32,
+            vgRptrGroupObjectID             OBJECT IDENTIFIER,
+            vgRptrGroupOperStatus           INTEGER,
+            vgRptrGroupPortCapacity         Integer32,
+            vgRptrGroupCablesBundled        INTEGER
+        }
+
+    vgRptrGroupIndex OBJECT-TYPE
+        SYNTAX     Integer32 (1..2146483647)
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "This object identifies the group within the
+                system for which this entry contains information.
+                The numbering scheme for groups is implementation
+                specific."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.4.1,
+                aGroupID."
+        ::= { vgRptrBasicGroupEntry 1 }
+
+    vgRptrGroupObjectID OBJECT-TYPE
+        SYNTAX     OBJECT IDENTIFIER
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The vendor's authoritative identification of the
+                group.  This value may be allocated within the
+                SMI enterprises subtree (1.3.6.1.4.1) and
+                provides a straight-forward and unambiguous means
+                for determining what kind of group is being
+                managed.
+
+                For example, this object could take the value
+                1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
+                Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
+                and had assigned the identifier
+                1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone
+                6-Port Plug-in Module.'"
+        ::= { vgRptrBasicGroupEntry 2 }
+
+    vgRptrGroupOperStatus OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       other(1),
+                       operational(2),
+                       malfunctioning(3),
+                       notPresent(4),
+                       underTest(5),
+                       resetInProgress(6)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "An object that indicates the operational status
+                of the group.
+
+                A status of notPresent(4) indicates that the
+                group is temporarily or permanently physically
+                and/or logically not a part of the system.  It
+                is an implementation-specific matter as to
+                whether the agent effectively removes notPresent
+                entries from the table.
+
+                A status of operational(2) indicates that the
+                group is functioning, and a status of
+
+                malfunctioning(3) indicates that the group is
+                malfunctioning in some way."
+        ::= { vgRptrBasicGroupEntry 3 }
+
+    vgRptrGroupPortCapacity OBJECT-TYPE
+        SYNTAX     Integer32 (1..2146483647)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The vgRptrGroupPortCapacity is the number of
+                ports that can be contained within the group.
+                Valid range is 1-2147483647.  Within each group,
+                the ports are uniquely numbered in the range from
+                1 to vgRptrGroupPortCapacity.
+
+                Some ports may not be present in the system, in
+                which case the actual number of ports present will
+                be less than the value of vgRptrGroupPortCapacity.
+                The number of ports present is never greater than
+                the value of vgRptrGroupPortCapacity.
+
+                Note:  In practice, this will generally be the
+                number of ports on a module, card, or board, and
+                the port numbers will correspond to numbers marked
+                on the physical embodiment."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.4.1,
+                aGroupPortCapacity."
+        ::= { vgRptrBasicGroupEntry 4 }
+
+    vgRptrGroupCablesBundled OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       someCablesBundled(1),
+                       noCablesBundled(2)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "This object is used to indicate whether there are
+                any four-pair UTP links connected to this group
+                that are contained in a cable bundle with multiple
+                four-pair groups (e.g. a 25-pair bundle).  Bundled
+                cable may only be used for repeater-to-end node
+                links where the end node is not in promiscuous
+                mode.
+
+                When a broadcast or multicast packet is received
+                from a port on this group that is not a
+
+                promiscuous or cascaded port, the packet will be
+                buffered completely before being repeated if
+                this object is set to 'someCablesBundled(1)'.
+                When this object is equal to 'noCablesBundled(2)',
+                all packets received from ports on this group will
+                be repeated as the frame is being received.
+
+                Note that the value 'someCablesBundled(1)' will
+                work in the vast majority of all installations,
+                regardless of whether or not any cables are
+                physically in a bundle, since packets received
+                from promiscuous and cascaded ports automatically
+                avoid the store and forward.  The main situation
+                in which 'noCablesBundled(2)' is beneficial is
+                when there is a large amount of multicast traffic
+                and the cables are not in a bundle.
+
+                The value of this object should be preserved
+                across repeater resets and power failures."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.4.1,
+                aGroupCablesBundled."
+        ::= { vgRptrBasicGroupEntry 5 }
+
+    vgRptrBasicPort   OBJECT IDENTIFIER ::= { vgRptrBasic 3 }
+
+    vgRptrBasicPortTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF VgRptrBasicPortEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "A table containing configuration and status
+                information about 802.12 repeater ports in the
+                system.  The number of entries is independent of
+                the number of repeaters in the managed system."
+        ::= { vgRptrBasicPort 1 }
+
+    vgRptrBasicPortEntry OBJECT-TYPE
+        SYNTAX     VgRptrBasicPortEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "An entry in the vgRptrBasicPortTable, containing
+                information about a single port."
+        INDEX      { vgRptrGroupIndex, vgRptrPortIndex }
+        ::= { vgRptrBasicPortTable 1 }
+
+    VgRptrBasicPortEntry ::=
+
+        SEQUENCE {
+            vgRptrPortIndex                 Integer32,
+            vgRptrPortType                  INTEGER,
+            vgRptrPortAdminStatus           INTEGER,
+            vgRptrPortOperStatus            INTEGER,
+            vgRptrPortSupportedPromiscMode  INTEGER,
+            vgRptrPortSupportedCascadeMode  INTEGER,
+            vgRptrPortAllowedTrainType      INTEGER,
+            vgRptrPortLastTrainConfig       OCTET STRING,
+            vgRptrPortTrainingResult        OCTET STRING,
+            vgRptrPortPriorityEnable        TruthValue,
+            vgRptrPortRptrInfoIndex         Integer32
+        }
+
+    vgRptrPortIndex OBJECT-TYPE
+        SYNTAX     Integer32 (1..2147483647)
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "This object identifies the port within the group
+                for which this entry contains information.  This
+                identifies the port independently from the
+                repeater it may be attached to.  The numbering
+                scheme for ports is implementation specific;
+                however, this value can never be greater than
+                vgRptrGroupPortCapacity for the associated group."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aPortID."
+        ::= { vgRptrBasicPortEntry 1 }
+
+    vgRptrPortType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       cascadeExternal(1),
+                       cascadeInternal(2),
+                       localExternal(3),
+                       localInternal(4)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Describes the type of port.  One of the
+                following:
+
+                    cascadeExternal - Port is an uplink with
+                                      physical connections which
+                                      are externally visible
+                    cascadeInternal - Port is an uplink with
+
+                                      physical connections which
+                                      are not externally visible,
+                                      such as a connection to an
+                                      internal backplane in a
+                                      chassis
+                    localExternal   - Port is a downlink or local
+                                      port with externally
+                                      visible connections
+                    localInternal   - Port is a downlink or local
+                                      port with connections which
+                                      are not externally visible,
+                                      such as a connection to an
+                                      internal agent
+
+                'internal' is used to identify ports which place
+                traffic into the repeater, but do not have any
+                external connections.  Note that both DTE and
+                cascaded repeater downlinks are considered
+                'local' ports."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aPortType."
+        ::= { vgRptrBasicPortEntry 2 }
+
+    vgRptrPortAdminStatus OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       enabled(1),
+                       disabled(2)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "Port enable/disable function.  Enabling a
+                disabled port will cause training to be
+                initiated by the training initiator (the slave
+                mode device) on the link.  Setting this object to
+                disabled(2) disables the port.
+
+                A disabled port neither transmits nor receives.
+                Once disabled, a port must be explicitly enabled
+                to restore operation.  A port which is disabled
+                when power is lost or when a reset is exerted
+                shall remain disabled when normal operation
+                resumes.
+
+                The value of this object should be preserved
+                across repeater resets and power failures."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aPortAdministrativeState."
+        ::= { vgRptrBasicPortEntry 3 }
+
+    vgRptrPortOperStatus OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       active(1),
+                       inactive(2),
+                       training(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "Current status for the port as specified by the
+                PORT_META_STATE in the port process module of
+                clause 12 [IEEE Std 802.12].
+
+                During initialization or any link warning
+                conditions, vgRptrPortStatus will be
+                'inactive(2)'.
+
+                When Training_Up is received by the repeater on a
+                local port (or when Training_Down is received on
+                a cascade port), vgRptrPortStatus will change to
+                'training(3)' and vgRptrTrainingResult can be
+                monitored to see the detailed status regarding
+                training.
+
+                When 24 consecutive good FCS packets are exchanged
+                and the configuration bits are OK,
+                vgRptrPortStatus will change to 'active(1)'.
+
+                A disabled port shall have a port status of
+                'inactive(2)'."
+        REFERENCE
+                "IEEE Standard 802.12, 13.2.4.5.1,
+                aPortStatus."
+        ::= { vgRptrBasicPortEntry 4 }
+
+    vgRptrPortSupportedPromiscMode OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       singleModeOnly(1),
+                       singleOrPromiscMode(2),
+                       promiscModeOnly(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object describes whether the port hardware
+                is capable of supporting promiscuous mode, single
+                address mode (i.e., repeater filters unicasts not
+                addressed to the end station attached to this
+                port), or both.  A port for which vgRptrPortType
+                is equal to 'cascadeInternal' or 'cascadeExternal'
+                will always have a value of 'promiscModeOnly' for
+                this object."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aSupportedPromiscMode."
+        ::= { vgRptrBasicPortEntry 5 }
+
+    vgRptrPortSupportedCascadeMode OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       endNodesOnly(1),
+                       endNodesOrRepeaters(2),
+                       cascadePort(3)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object describes whether the port hardware
+                is capable of supporting cascaded repeaters, end
+                nodes, or both.  A port for which vgRptrPortType
+                is equal to 'cascadeInternal' or
+                'cascadeExternal' will always have a value of
+                'cascadePort' for this object."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aSupportedCascadeMode."
+        ::= { vgRptrBasicPortEntry 6 }
+
+    vgRptrPortAllowedTrainType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       allowEndNodesOnly(1),
+                       allowPromiscuousEndNodes(2),
+                       allowEndNodesOrRepeaters(3),
+                       allowAnything(4)
+                   }
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "This security object is set by the network
+                manager to configure what type of device is
+                permitted to connect to the port.  One of the
+                following values:
+
+                    allowEndNodesOnly        - only non-
+                                               promiscuous end
+                                               nodes permitted.
+                    allowPromiscuousEndNodes - promiscuous or
+                                               non-promiscuous
+                                               end nodes
+                                               permitted
+                    allowEndNodesOrRepeaters - repeaters or non-
+                                               promiscuous end
+                                               nodes permitted
+                    allowAnything            - repeaters,
+                                               promiscuous or
+                                               non-promiscuous
+                                               end nodes
+                                               permitted
+
+                For a port for which vgRptrPortType is equal to
+                'cascadeInternal' or 'cascadeExternal', the
+                corresponding instance of this object may not be
+                set to 'allowEndNodesOnly' or
+                'allowPromiscuousEndNodes'.
+
+                The agent must reject a SET of this object if the
+                value includes no capabilities that are
+                supported by this port's hardware, as defined by
+                the values of the corresponding instances of
+                vgRptrPortSupportedPromiscMode and
+                vgRptrPortSupportedCascadeMode.
+
+                Note that vgRptrPortSupportPromiscMode and
+                vgRptrPortSupportedCascadeMode represent what the
+                port hardware is capable of supporting.
+                vgRptrPortAllowedTrainType is used for setting an
+                administrative policy for a port.  The actual set
+                of training configurations that will be allowed
+                to succeed on a port is the intersection of what
+                the hardware will support and what is
+                administratively allowed.  The above requirement
+                on what values may be set to this object says that
+                the intersection of what is supported and what is
+                allowed must be non-empty.  In other words, it
+                must not result in a situation in which nothing
+                would be allowed to train on that port.  However,
+                a value can be set to this object as long as the
+                combination of this object and what is supported
+                by the hardware would still leave at least one
+                configuration that could successfully train on the
+                port.
+
+                The value of this object should be preserved
+                across repeater resets and power failures."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aAllowableTrainingType."
+        ::= { vgRptrBasicPortEntry 7 }
+
+    vgRptrPortLastTrainConfig OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(2))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a 16 bit field.  For local ports,
+                this object contains the requested configuration
+                field from the most recent error-free training
+                request frame sent by the device connected to
+                the port.  For cascade ports, this object contains
+                the responder's allowed configuration field from
+                the most recent error-free training response frame
+                received in response to training initiated by this
+                repeater.  The format of the current version of
+                this field is described in section 3.2.  Please
+                refer to the most recent version of the IEEE
+                802.12 standard for the most up-to-date definition
+                of the format of this object."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aLastTrainingConfig."
+        ::= { vgRptrBasicPortEntry 8 }
+
+    vgRptrPortTrainingResult OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(3))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This 18 bit field is used to indicate the result
+                of training.  It contains two bits which indicate
+                if error-free training frames have been received,
+                and it also contains the 16 bits of the allowed
+                configuration field from the most recent
+                error-free training response frame on the port.
+
+                  First Octet:    Second and Third Octets:
+                  7 6 5 4 3 2 1 0
+                 +-+-+-+-+-+-+-+-+-----------------------------+
+                 |0|0|0|0|0|0|V|G| allowed configuration field |
+                 +-+-+-+-+-+-+-+-+-----------------------------+
+
+                    V:   Valid: set when at least one error-free
+                         training frame has been received.
+                         Indicates the 16 training configuration
+                         bits in vgRptrPortLastTrainConfig and
+                         vgRptrPortTrainingResult contain valid
+                         information.  This bit is cleared when
+                         vgRptrPortStatus transitions to the
+                         'inactive' or 'training' state.
+                    G:   LinkGood: indicates the link hardware is
+                         OK.  Set if 24 consecutive error-free
+                         training packets have been exchanged.
+                         Cleared when a training packet with
+                         errors is received, or when
+                         vgRptrPortStatus transitions to the
+                         'inactive' or 'training' state.
+
+                The format of the current version of the allowed
+                configuration field is described in section 3.2.
+                Please refer to the most recent version of the
+                IEEE 802.12 standard for the most up-to-date
+                definition of the format of this field.
+
+                If the port is in training, a management station
+                can examine this object to see if any training
+                packets have been passed successfully.  If there
+                have been any good training packets, the Valid
+                bit will be set and the management station can
+                examine the allowed configuration field to see if
+                there is a duplicate address, configuration, or
+                security problem.
+
+                Note that on a repeater local port, this repeater
+                generates the training response bits, while on
+                a cascade port, the device at the upper end of
+                the link originated the training response bits."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aTrainingResult."
+        ::= { vgRptrBasicPortEntry 9 }
+    vgRptrPortPriorityEnable OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "A configuration flag used to determine whether
+                the repeater will service high priority requests
+                received on the port as high priority or normal
+                priority.  When 'false', high priority requests
+
+                on this port will be serviced as normal priority.
+
+                The setting of this object has no effect on a
+                cascade port.  Also note that the setting of this
+                object has no effect on a port connected to a
+                cascaded repeater.  In both of these cases, this
+                setting is treated as always 'true'.  The value
+                'false' only has an effect when the port is a
+                localInternal or localExternal port connected to
+                an end node.
+
+                The value of this object should be preserved
+                across repeater resets and power failures."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aPriorityEnable."
+        ::= { vgRptrBasicPortEntry 10 }
+
+    vgRptrPortRptrInfoIndex OBJECT-TYPE
+        SYNTAX     Integer32 (0..2147483647)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object identifies the repeater that this
+                port is currently mapped to.  The repeater
+                identified by a particular value of this object
+                is the same as that identified by the same value
+                of vgRptrInfoIndex.  A value of zero indicates
+                that this port is not currently mapped to any
+                repeater."
+        ::= { vgRptrBasicPortEntry 11 }
+
+    vgRptrMonitor      OBJECT IDENTIFIER ::= { vgRptrObjects 2 }
+
+    vgRptrMonRepeater  OBJECT IDENTIFIER ::= { vgRptrMonitor 1 }
+
+    vgRptrMonitorTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF VgRptrMonitorEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "A table of performance and error statistics for
+                each repeater in the system.  The instance of the
+                vgRptrInfoLastChange associated with a repeater
+                is used to indicate possible discontinuities of
+                the counters in this table that are associated
+                with the same repeater."
+        ::= { vgRptrMonRepeater 1 }
+
+    vgRptrMonitorEntry OBJECT-TYPE
+        SYNTAX     VgRptrMonitorEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "An entry in the table, containing statistics
+                for a single repeater."
+        INDEX      { vgRptrInfoIndex }
+        ::= { vgRptrMonitorTable 1 }
+
+    VgRptrMonitorEntry ::=
+        SEQUENCE {
+            vgRptrMonTotalReadableFrames    Counter32,
+            vgRptrMonTotalReadableOctets    Counter32,
+            vgRptrMonReadableOctetRollovers Counter32,
+            vgRptrMonHCTotalReadableOctets  Counter64,
+            vgRptrMonTotalErrors            Counter32
+        }
+
+    vgRptrMonTotalReadableFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of good frames of valid frame
+                length that have been received on all ports in
+                this repeater.  If an implementation cannot
+                obtain a count of frames as seen by the repeater
+                itself, this counter may be implemented as the
+                summation of the values of the
+                vgRptrPortReadableFrames counters for all of the
+                ports in this repeater.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrInfoLastChange changes."
+        ::= { vgRptrMonitorEntry 1 }
+
+    vgRptrMonTotalReadableOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of octets contained in good
+                frames that have been received on all ports in
+                this repeater.  If an implementation cannot
+
+                obtain a count of octets as seen by the repeater
+                itself, this counter may be implemented as the
+                summation of the values of the
+                vgRptrPortReadableOctets counters for all of the
+                ports in this repeater.
+
+                Note that this counter can roll over very
+                quickly.  A management station is advised to
+                also poll the vgRptrReadableOctetRollovers
+                object, or to use the 64-bit counter defined by
+                vgRptrMonHCTotalReadableOctets instead of the
+                two 32-bit counters.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrInfoLastChange changes."
+        ::= { vgRptrMonitorEntry 2 }
+
+    vgRptrMonReadableOctetRollovers OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of times that the associated
+                instance of the vgRptrMonTotalReadableOctets
+                counter has rolled over.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrInfoLastChange changes."
+        ::= { vgRptrMonitorEntry 3 }
+
+    vgRptrMonHCTotalReadableOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of octets contained in good
+                frames that have been received on all ports in
+                this repeater.  If an implementation cannot
+                obtain a count of octets as seen by the repeater
+                itself, this counter may be implemented as the
+                summation of the values of the
+                vgRptrPortHCReadableOctets counters for all of the
+                ports in this repeater.
+
+                This counter is a 64 bit version of
+                vgRptrMonTotalReadableOctets.  It should be used
+                by Network Management protocols which support 64
+                bit counters (e.g. SNMPv2).
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrInfoLastChange changes."
+        ::= { vgRptrMonitorEntry 4 }
+
+    vgRptrMonTotalErrors OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The total number of errors which have occurred on
+                all of the ports in this repeater.  If an
+                implementation cannot obtain a count of these
+                errors as seen by the repeater itself, this
+                counter may be implemented as the summation of the
+                values of the vgRptrPortIPMFrames,
+                vgRptrPortOversizeFrames, and
+                vgRptrPortDataErrorFrames counters for all of the
+                ports in this repeater.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrInfoLastChange changes."
+        ::= { vgRptrMonitorEntry 5 }
+
+    vgRptrMonGroup     OBJECT IDENTIFIER ::= { vgRptrMonitor 2 }
+    -- Currently unused
+
+    vgRptrMonPort      OBJECT IDENTIFIER ::= { vgRptrMonitor 3 }
+
+    vgRptrMonPortTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF VgRptrMonPortEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "A table of performance and error statistics for
+                the ports.  The columnar object
+                vgRptrPortLastChange is used to indicate possible
+                discontinuities of counter type columnar objects
+                in this table."
+        ::= { vgRptrMonPort 1 }
+
+    vgRptrMonPortEntry OBJECT-TYPE
+        SYNTAX     VgRptrMonPortEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "An entry in the vgRptrMonPortTable, containing
+                performance and error statistics for a single
+                port."
+        INDEX      { vgRptrGroupIndex, vgRptrPortIndex }
+        ::= { vgRptrMonPortTable 1 }
+
+    VgRptrMonPortEntry ::=
+        SEQUENCE {
+            vgRptrPortReadableFrames        Counter32,
+            vgRptrPortReadableOctets        Counter32,
+            vgRptrPortReadOctetRollovers    Counter32,
+            vgRptrPortHCReadableOctets      Counter64,
+            vgRptrPortUnreadableOctets      Counter32,
+            vgRptrPortUnreadOctetRollovers  Counter32,
+            vgRptrPortHCUnreadableOctets    Counter64,
+            vgRptrPortHighPriorityFrames    Counter32,
+            vgRptrPortHighPriorityOctets    Counter32,
+            vgRptrPortHighPriOctetRollovers Counter32,
+            vgRptrPortHCHighPriorityOctets  Counter64,
+            vgRptrPortNormPriorityFrames    Counter32,
+            vgRptrPortNormPriorityOctets    Counter32,
+            vgRptrPortNormPriOctetRollovers Counter32,
+            vgRptrPortHCNormPriorityOctets  Counter64,
+            vgRptrPortBroadcastFrames       Counter32,
+            vgRptrPortMulticastFrames       Counter32,
+            vgRptrPortNullAddressedFrames   Counter32,
+            vgRptrPortIPMFrames             Counter32,
+            vgRptrPortOversizeFrames        Counter32,
+            vgRptrPortDataErrorFrames       Counter32,
+            vgRptrPortPriorityPromotions    Counter32,
+            vgRptrPortTransitionToTrainings Counter32,
+            vgRptrPortLastChange            TimeStamp
+        }
+
+    vgRptrPortReadableFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is the number of good frames of
+                valid frame length that have been received on
+                this port.  This counter is incremented by one
+                for each frame received on the port which is not
+                counted by any of the following error counters:
+                vgRptrPortIPMFrames, vgRptrPortOversizeFrames,
+                vgRptrPortNullAddressedFrames, or
+                vgRptrPortDataErrorFrames.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aReadableFramesReceived."
+        ::= { vgRptrMonPortEntry 1 }
+
+    vgRptrPortReadableOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in good frames that have been received
+                on this port.  This counter is incremented by
+                OctetCount for each frame received on this port
+                which has been determined to be a readable frame
+                (i.e. each frame counted by
+                vgRptrPortReadableFrames).
+
+                Note that this counter can roll over very
+                quickly.  A management station is advised to
+                also poll the vgRptrPortReadOctetRollovers
+                object, or to use the 64-bit counter defined by
+                vgRptrPortHCReadableOctets instead of the two
+                32-bit counters.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aReadableOctetsReceived."
+        ::= { vgRptrMonPortEntry 2 }
+
+    vgRptrPortReadOctetRollovers OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of times
+                that the associated instance of the
+                vgRptrPortReadableOctets counter has rolled over.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aReadableOctetsReceived."
+        ::= { vgRptrMonPortEntry 3 }
+
+    vgRptrPortHCReadableOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in good frames that have been received
+                on this port.  This counter is incremented by
+                OctetCount for each frame received on this port
+                which has been determined to be a readable frame
+                (i.e. each frame counted by
+                vgRptrPortReadableFrames).
+
+                This counter is a 64 bit version of
+                vgRptrPortReadableOctets.  It should be used by
+                Network Management protocols which support 64 bit
+                counters (e.g. SNMPv2).
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aReadableOctetsReceived."
+        ::= { vgRptrMonPortEntry 4 }
+
+    vgRptrPortUnreadableOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in invalid frames that have been
+                received on this port.  This counter is
+                incremented by OctetCount for each frame received
+                on this port which is counted by
+                vgRptrPortIPMFrames, vgRptrPortOversizeFrames,
+                vgRptrPortNullAddressedFrames, or
+                vgRptrPortDataErrorFrames.  This counter can be
+                combined with vgRptrPortReadableOctets to
+                calculate network utilization.
+
+                Note that this counter can roll over very
+                quickly.  A management station is advised to
+                also poll the vgRptrPortUnreadOctetRollovers
+                object, or to use the 64-bit counter defined by
+                vgRptrPortHCUnreadableOctets instead of the two
+                32-bit counters.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aOctetsInUnreadableFramesRcvd."
+        ::= { vgRptrMonPortEntry 5 }
+
+    vgRptrPortUnreadOctetRollovers OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of times
+                that the associated instance of the
+                vgRptrPortUnreadableOctets counter has rolled
+                over.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aOctetsInUnreadableFramesRcvd."
+        ::= { vgRptrMonPortEntry 6 }
+
+    vgRptrPortHCUnreadableOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in invalid frames that have been
+                received on this port.  This counter is
+                incremented by OctetCount for each frame received
+                on this port which is counted by
+                vgRptrPortIPMFrames, vgRptrPortOversizeFrames,
+                vgRptrPortNullAddressedFrames, or
+                vgRptrPortDataErrorFrames.  This counter can be
+                combined with vgRptrPortHCReadableOctets to
+                calculate network utilization.
+
+                This counter is a 64 bit version of
+                vgRptrPortUnreadableOctets.  It should be used
+                by Network Management protocols which support 64
+                bit counters (e.g. SNMPv2).
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aOctetsInUnreadableFramesRcvd."
+        ::= { vgRptrMonPortEntry 7 }
+
+    vgRptrPortHighPriorityFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of high priority frames
+                that have been received on this port.  This
+                counter is incremented by one for each high
+                priority frame received on this port.  This
+                counter includes both good and bad high priority
+                frames, as well as high priority training frames.
+                This counter does not include normal priority
+                frames which were priority promoted.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aHighPriorityFramesReceived."
+        ::= { vgRptrMonPortEntry 8 }
+
+    vgRptrPortHighPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in high priority frames that have been
+                received on this port.  This counter is
+                incremented by OctetCount for each frame received
+                on this port which is counted by
+                vgRptrPortHighPriorityFrames.
+
+                Note that this counter can roll over very
+                quickly.  A management station is advised to
+                also poll the vgRptrPortHighPriOctetRollovers
+                object, or to use the 64-bit counter defined by
+                vgRptrPortHCHighPriorityOctets instead of the two
+                32-bit counters.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aHighPriorityOctetsReceived."
+        ::= { vgRptrMonPortEntry 9 }
+
+    vgRptrPortHighPriOctetRollovers OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of times
+                that the associated instance of the
+                vgRptrPortHighPriorityOctets counter has rolled
+                over.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aHighPriorityOctetsReceived."
+        ::= { vgRptrMonPortEntry 10 }
+
+    vgRptrPortHCHighPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in high priority frames that have been
+                received on this port.  This counter is
+                incremented by OctetCount for each frame received
+                on this port which is counted by
+                vgRptrPortHighPriorityFrames.
+
+                This counter is a 64 bit version of
+                vgRptrPortHighPriorityOctets.  It should be used
+                by Network Management protocols which support
+                64 bit counters (e.g. SNMPv2).
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aHighPriorityOctetsReceived."
+        ::= { vgRptrMonPortEntry 11 }
+
+    vgRptrPortNormPriorityFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of normal priority frames
+                that have been received on this port.  This
+                counter is incremented by one for each normal
+                priority frame received on this port. This
+                counter includes both good and bad normal
+                priority frames, as well as normal priority
+                training frames and normal priority frames which
+                were priority promoted.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aNormalPriorityFramesReceived."
+        ::= { vgRptrMonPortEntry 12 }
+
+    vgRptrPortNormPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in normal priority frames that have
+                been received on this port.  This counter is
+                incremented by OctetCount for each frame received
+                on this port which is counted by
+                vgRptrPortNormPriorityFrames.
+
+                Note that this counter can roll over very
+                quickly.  A management station is advised to
+                also poll the vgRptrPortNormPriOctetRollovers
+                object, or to use the 64-bit counter defined by
+                vgRptrPortHCNormPriorityOctets instead of the two
+                32-bit counters.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aNormalPriorityOctetsReceived."
+        ::= { vgRptrMonPortEntry 13 }
+
+    vgRptrPortNormPriOctetRollovers OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of times
+                that the associated instance of the
+                vgRptrPortNormPriorityOctets counter has rolled
+                over.
+
+                This two-counter mechanism is provided for those
+                network management protocols that do not support
+                64-bit counters (e.g. SNMPv1).  Note that
+                retrieval of these two counters in the same PDU
+                is NOT guaranteed to be atomic.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aNormalPriorityOctetsReceived."
+        ::= { vgRptrMonPortEntry 14 }
+
+    vgRptrPortHCNormPriorityOctets OBJECT-TYPE
+        SYNTAX     Counter64
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of octets
+                contained in normal priority frames that have
+                been received on this port.  This counter is
+                incremented by OctetCount for each frame received
+
+                on this port which is counted by
+                vgRptrPortNormPriorityFrames.
+
+                This counter is a 64 bit version of
+                vgRptrPortNormPriorityOctets.  It should be used
+                by Network Management protocols which support
+                64 bit counters (e.g. SNMPv2).
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aNormalPriorityOctetsReceived."
+        ::= { vgRptrMonPortEntry 15 }
+
+    vgRptrPortBroadcastFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of broadcast packets that
+                have been received on this port.  This counter is
+                incremented by one for each readable frame
+                received on this port whose destination MAC
+                address is the broadcast address.  Frames
+                counted by this counter are also counted by
+                vgRptrPortReadableFrames.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aBroadcastFramesReceived."
+        ::= { vgRptrMonPortEntry 16 }
+
+    vgRptrPortMulticastFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of multicast packets that
+                have been received on this port.  This counter is
+                incremented by one for each readable frame
+                received on this port whose destination MAC
+                address has the group address bit set, but is not
+                the broadcast address.  Frames counted by this
+
+                counter are also counted by
+                vgRptrPortReadableFrames, but not by
+                vgRptrPortBroadcastFrames.  Note that when the
+                value of the instance vgRptrInfoCurrentFramingType
+                for the repeater that this port is associated
+                with is equal to 'frameType88025', this count
+                includes packets addressed to functional
+                addresses.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aMulticastFramesReceived."
+        ::= { vgRptrMonPortEntry 17 }
+
+    vgRptrPortNullAddressedFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of null addressed packets
+                that have been received on this port.  This
+                counter is incremented by one for each frame
+                received on this port with a destination MAC
+                address consisting of all zero bits.  Both void
+                and training frames are included in this
+                counter.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aNullAddressedFramesReceived."
+        ::= { vgRptrMonPortEntry 18 }
+
+    vgRptrPortIPMFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of the number of frames
+                that have been received on this port with an
+                invalid packet marker and no PMI errors.  A
+                repeater will write an invalid packet marker to
+                the end of a frame containing errors as it is
+
+                forwarded through the repeater to the other
+                ports.  This counter is incremented by one for
+                each frame received on this port which has had an
+                invalid packet marker added to the end of the
+                frame.
+
+                This counter indicates problems occurring in the
+                domain of other repeaters, as opposed to problems
+                with cables or devices directly attached to this
+                repeater.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aIPMFramesReceived."
+        ::= { vgRptrMonPortEntry 19 }
+
+    vgRptrPortOversizeFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of oversize frames
+                received on this port.  This counter is
+                incremented by one for each frame received on
+                this port whose OctetCount is larger than the
+                maximum legal frame size.
+
+                The frame size which causes this counter to
+                increment is dependent on the current value of
+                vgRptrInfoCurrentFramingType for the repeater that
+                the port is associated with.  When
+                vgRptrInfoCurrentFramingType is equal to
+                frameType88023 this counter will increment for
+                frames that are 1519 octets or larger.  When
+                vgRptrInfoCurrentFramingType is equal to
+                frameType88025 this counter will increment for
+                frames that are 4521 octets or larger.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aOversizeFramesReceived."
+        ::= { vgRptrMonPortEntry 20 }
+
+    vgRptrPortDataErrorFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is a count of errored frames
+                received on this port.  This counter is
+                incremented by one for each frame received on
+                this port with any of the following errors: bad
+                FCS (with no IPM), PMI errors (excluding frames
+                with an IPM error as the only PMI error), or
+                undersize (with no IPM).  Does not include
+                packets counted by vgRptrPortIPMFrames,
+                vgRptrPortOversizeFrames, or
+                vgRptrPortNullAddressedFrames.
+
+                This counter indicates problems with cables or
+                devices directly connected to this repeater, while
+                vgRptrPortIPMFrames indicates problems occurring
+                in the domain of other repeaters.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aDataErrorFramesReceived."
+        ::= { vgRptrMonPortEntry 21 }
+
+    vgRptrPortPriorityPromotions OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter is incremented by one each time the
+                priority promotion timer has expired on this port
+                and a normal priority frame is priority
+                promoted.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aPriorityPromotions."
+        ::= { vgRptrMonPortEntry 22 }
+
+    vgRptrPortTransitionToTrainings OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter is incremented by one each time the
+                vgRptrPortStatus object for this port transitions
+                into the 'training' state.
+
+                This counter may experience a discontinuity when
+                the value of the corresponding instance of
+                vgRptrPortLastChange changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aTransitionsIntoTraining."
+        ::= { vgRptrMonPortEntry 23 }
+
+    vgRptrPortLastChange OBJECT-TYPE
+        SYNTAX     TimeStamp
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The value of sysUpTime when the last of the
+                following occurred:
+                  1) the agent cold- or warm-started;
+                  2) the row for the port was created
+                     (such as when a device or module was
+                     added to the system); or
+                  3) any condition that would cause one of
+                     the counters for the row to experience
+                     a discontinuity."
+        ::= { vgRptrMonPortEntry 24 }
+
+    vgRptrAddrTrack   OBJECT IDENTIFIER ::= { vgRptrObjects 3 }
+
+    vgRptrAddrTrackRptr
+        OBJECT IDENTIFIER ::= { vgRptrAddrTrack 1 }
+
+    -- Currently unused
+
+    vgRptrAddrTrackGroup
+        OBJECT IDENTIFIER ::= { vgRptrAddrTrack 2 }
+    -- Currently unused
+
+    vgRptrAddrTrackPort
+        OBJECT IDENTIFIER ::= { vgRptrAddrTrack 3 }
+
+    vgRptrAddrTrackTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF VgRptrAddrTrackEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "Table of address mapping information about the
+            ports."
+        ::= { vgRptrAddrTrackPort 1 }
+
+    vgRptrAddrTrackEntry OBJECT-TYPE
+        SYNTAX     VgRptrAddrTrackEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "An entry in the table, containing address mapping
+            information about a single port."
+        INDEX      { vgRptrGroupIndex, vgRptrPortIndex }
+        ::= { vgRptrAddrTrackTable 1 }
+
+    VgRptrAddrTrackEntry ::=
+        SEQUENCE {
+            vgRptrAddrLastTrainedAddress   OCTET STRING,
+            vgRptrAddrTrainedAddrChanges   Counter32,
+            vgRptrRptrDetectedDupAddress   TruthValue,
+            vgRptrMgrDetectedDupAddress    TruthValue
+        }
+
+    vgRptrAddrLastTrainedAddress OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(0 | 6))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is the MAC address of the last
+                station which succeeded in training on this port.
+                A cascaded repeater may train using the null
+                address.  If no stations have succeeded in
+                training on this port since the agent began
+                monitoring the port activity, the agent shall
+                return a string of length zero."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aLastTrainedAddress."
+        ::= { vgRptrAddrTrackEntry 1 }
+
+    vgRptrAddrTrainedAddrChanges OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter is incremented by one for each time
+                that the vgRptrAddrLastTrainedAddress object for
+                this port changes."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aTrainedAddressChanges."
+        ::= { vgRptrAddrTrackEntry 2 }
+
+    vgRptrRptrDetectedDupAddress OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object is used to indicate that the
+                repeater detected an error-free training frame on
+                this port with a non-null source MAC address which
+                matches the value of vgRptrAddrLastTrainedAddress
+                of another active port in the same repeater.  This
+                is reset to 'false' when an error-free training
+                frame is received with a non-null source MAC
+                address which does not match
+                vgRptrAddrLastTrainedAddress of another port which
+                is active in the same repeater.
+
+                For the cascade port, this object will be 'true'
+                if the 'D' bit in the most recently received
+                error-free training response frame was set,
+                indicating the device at the other end of the link
+                believes that this repeater's cascade port is
+                using a duplicate address.  This may be because
+                the device at the other end of the link detected a
+                duplicate address itself, or, if the other device
+                is also a repeater, it could be because
+                vgRptrMgrDetectedDupAddress was set to 'true' on
+                the port that this repeater's cascade port is
+                connected to."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aLocalRptrDetectedDupAddr."
+        ::= { vgRptrAddrTrackEntry 3 }
+
+    vgRptrMgrDetectedDupAddress OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-write
+        STATUS     current
+        DESCRIPTION
+                "This object can be set by a management station
+
+                when it detects that there is a duplicate MAC
+                address.  This object is OR'd with
+                vgRptrRptrDetectedDupAddress to form the value of
+                the 'D' bit in training response frames on this
+                port.
+
+                The purpose of this object is to provide a means
+                for network management software to inform an end
+                station that it is using a duplicate station
+                address.  Setting this object does not affect the
+                current state of the link; the end station will
+                not be informed of the duplicate address until it
+                retrains for some reason.  Note that regardless
+                of its station address, the end station will not
+                be able to train successfully until the network
+                management software has set this object back to
+                'false'.  Although this object exists on
+                cascade ports, it does not perform any function
+                since this repeater is the initiator of training
+                on a cascade port."
+        REFERENCE
+                "IEEE Standard 802.12-1995, 13.2.4.5.1,
+                aCentralMgmtDetectedDupAddr."
+        ::= { vgRptrAddrTrackEntry 4 }
+
+    vgRptrTraps         OBJECT IDENTIFIER ::= { vgRptrMIB 2 }
+    vgRptrTrapPrefix    OBJECT IDENTIFIER ::= { vgRptrTraps 0 }
+
+    vgRptrHealth NOTIFICATION-TYPE
+        OBJECTS    { vgRptrInfoOperStatus }
+        STATUS     current
+        DESCRIPTION
+                "A vgRptrHealth trap conveys information related
+                to the operational state of a repeater.  This trap
+                is sent when the value of an instance of
+                vgRptrInfoOperStatus changes.  The vgRptrHealth
+                trap is not sent as a result of powering up a
+                repeater.
+
+                The vgRptrHealth trap must contain the instance of
+                the vgRptrInfoOperStatus object associated with
+                the affected repeater.
+
+                The agent must throttle the generation of
+                consecutive vgRptrHealth traps so that there is at
+                least a five-second gap between traps of this
+                type.  When traps are throttled, they are dropped,
+                not queued for sending at a future time.  (Note
+                that 'generating' a trap means sending to all
+                configured recipients.)"
+        REFERENCE
+                "IEEE 802.12, Layer Management, 13.2.4.2.3,
+                nRepeaterHealth."
+        ::= { vgRptrTrapPrefix 1 }
+
+    vgRptrResetEvent NOTIFICATION-TYPE
+        OBJECTS    { vgRptrInfoOperStatus }
+        STATUS     current
+        DESCRIPTION
+                "A vgRptrResetEvent trap conveys information
+                related to the operational state of a repeater.
+                This trap is sent on completion of a repeater
+                reset action.  A repeater reset action is defined
+                as a transition to its initial state as specified
+                in clause 12 [IEEE Std 802.12] when triggered by
+                a management command.
+
+                The vgRptrResetEvent trap is not sent when the
+                agent restarts and sends an SNMP coldStart or
+                warmStart trap.
+
+                The vgRptrResetEvent trap must contain the
+                instance of the vgRptrInfoOperStatus object
+                associated with the affected repeater.
+
+                The agent must throttle the generation of
+                consecutive vgRptrResetEvent traps so that there
+                is at least a five-second gap between traps of
+                this type.  When traps are throttled, they are
+                dropped, not queued for sending at a future time.
+                (Note that 'generating' a trap means sending to
+                all configured recipients.)"
+        REFERENCE
+                "IEEE 802.12, Layer Management, 13.2.4.2.3,
+                nRepeaterReset."
+        ::= { vgRptrTrapPrefix 2 }
+
+    -- conformance information
+
+    vgRptrConformance OBJECT IDENTIFIER ::= { vgRptrMIB 3 }
+
+    vgRptrCompliances
+                 OBJECT IDENTIFIER ::= { vgRptrConformance 1 }
+
+    vgRptrGroups OBJECT IDENTIFIER ::= { vgRptrConformance 2 }
+
+    -- compliance statements
+
+    vgRptrCompliance MODULE-COMPLIANCE
+        STATUS     current
+        DESCRIPTION
+                "The compliance statement for managed 802.12
+                repeaters."
+
+        MODULE  -- this module
+            MANDATORY-GROUPS { vgRptrConfigGroup,
+                               vgRptrStatsGroup,
+                               vgRptrAddrGroup,
+                               vgRptrNotificationsGroup }
+
+            GROUP        vgRptrStats64Group
+            DESCRIPTION
+                   "Implementation of this group is recommended
+                   for systems which can support Counter64."
+
+            OBJECT       vgRptrInfoDesiredFramingType
+            MIN-ACCESS   read-only
+            DESCRIPTION
+                    "Write access to this object is not required
+                    in a repeater system that does not support
+                    configuration of framing types."
+
+        MODULE     SNMP-REPEATER-MIB
+            GROUP        snmpRptrGrpRptrAddrSearch
+            DESCRIPTION
+                    "Implementation of this group is recommended
+                    for systems which have the necessary
+                    instrumentation to search all incoming data
+                    streams for a particular source MAC address."
+        ::= { vgRptrCompliances 1 }
+
+    -- units of conformance
+
+    vgRptrConfigGroup OBJECT-GROUP
+        OBJECTS    {
+                     vgRptrInfoMACAddress,
+                     vgRptrInfoCurrentFramingType,
+                     vgRptrInfoDesiredFramingType,
+                     vgRptrInfoFramingCapability,
+                     vgRptrInfoTrainingVersion,
+                     vgRptrInfoOperStatus,
+                     vgRptrInfoReset,
+                     vgRptrInfoLastChange,
+                     vgRptrGroupObjectID,
+                     vgRptrGroupOperStatus,
+                     vgRptrGroupPortCapacity,
+                     vgRptrGroupCablesBundled,
+                     vgRptrPortType,
+                     vgRptrPortAdminStatus,
+                     vgRptrPortOperStatus,
+                     vgRptrPortSupportedPromiscMode,
+                     vgRptrPortSupportedCascadeMode,
+                     vgRptrPortAllowedTrainType,
+                     vgRptrPortLastTrainConfig,
+                     vgRptrPortTrainingResult,
+                     vgRptrPortPriorityEnable,
+                     vgRptrPortRptrInfoIndex
+                   }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects for managing the status
+                and configuration of IEEE 802.12 repeaters."
+        ::= { vgRptrGroups 1 }
+
+    vgRptrStatsGroup OBJECT-GROUP
+        OBJECTS    {
+                     vgRptrMonTotalReadableFrames,
+                     vgRptrMonTotalReadableOctets,
+                     vgRptrMonReadableOctetRollovers,
+                     vgRptrMonTotalErrors,
+                     vgRptrPortReadableFrames,
+                     vgRptrPortReadableOctets,
+                     vgRptrPortReadOctetRollovers,
+                     vgRptrPortUnreadableOctets,
+                     vgRptrPortUnreadOctetRollovers,
+                     vgRptrPortHighPriorityFrames,
+                     vgRptrPortHighPriorityOctets,
+                     vgRptrPortHighPriOctetRollovers,
+                     vgRptrPortNormPriorityFrames,
+                     vgRptrPortNormPriorityOctets,
+                     vgRptrPortNormPriOctetRollovers,
+                     vgRptrPortBroadcastFrames,
+                     vgRptrPortMulticastFrames,
+                     vgRptrPortNullAddressedFrames,
+                     vgRptrPortIPMFrames,
+                     vgRptrPortOversizeFrames,
+                     vgRptrPortDataErrorFrames,
+                     vgRptrPortPriorityPromotions,
+                     vgRptrPortTransitionToTrainings,
+                     vgRptrPortLastChange
+                   }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects for providing statistics
+                for IEEE 802.12 repeaters.  Systems which support
+                Counter64 should also implement
+                vgRptrStats64Group."
+        ::= { vgRptrGroups 2 }
+
+    vgRptrStats64Group OBJECT-GROUP
+        OBJECTS    {
+                     vgRptrMonHCTotalReadableOctets,
+                     vgRptrPortHCReadableOctets,
+                     vgRptrPortHCUnreadableOctets,
+                     vgRptrPortHCHighPriorityOctets,
+                     vgRptrPortHCNormPriorityOctets
+                   }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects for providing statistics
+                for IEEE 802.12 repeaters in a system that
+                supports Counter64."
+        ::= { vgRptrGroups 3 }
+
+    vgRptrAddrGroup OBJECT-GROUP
+        OBJECTS    {
+                     vgRptrAddrLastTrainedAddress,
+                     vgRptrAddrTrainedAddrChanges,
+                     vgRptrRptrDetectedDupAddress,
+                     vgRptrMgrDetectedDupAddress
+                   }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects for tracking addresses
+                on IEEE 802.12 repeaters."
+        ::= { vgRptrGroups 4 }
+
+    vgRptrNotificationsGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                        vgRptrHealth,
+                        vgRptrResetEvent
+                      }
+        STATUS        current
+        DESCRIPTION
+                "A collection of notifications used to indicate
+                802.12 repeater general status changes."
+        ::= { vgRptrGroups 5 }
+
+    END
diff --git a/snmp_builder/mibs/DOT3-EPON-MIB.mib b/snmp_builder/mibs/DOT3-EPON-MIB.mib
new file mode 100644
index 0000000..528dd41
--- /dev/null
+++ b/snmp_builder/mibs/DOT3-EPON-MIB.mib
@@ -0,0 +1,2532 @@
+DOT3-EPON-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+         MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
+         Integer32, Unsigned32, Counter64
+             FROM SNMPv2-SMI
+         TruthValue, MacAddress
+             FROM SNMPv2-TC
+         ifIndex
+             FROM IF-MIB
+         MODULE-COMPLIANCE, OBJECT-GROUP
+             FROM SNMPv2-CONF
+         ;
+
+dot3EponMIB MODULE-IDENTITY
+    LAST-UPDATED "200703290000Z"  -- March 29, 2007
+    ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working
+                 Group"
+    CONTACT-INFO
+                 "WG charter:
+              http://www.ietf.org/html.charters/hubmib-charter.html
+                  Mailing Lists:
+                    General Discussion: hubmib@ietf.org
+                    To Subscribe: hubmib-request@ietf.org
+
+                    In Body: subscribe your_email_address
+                    Chair: Bert Wijnen
+                    Postal: Lucent Technologies
+                            Schagen 33
+                            3461 GL Linschoten
+                            Netherlands
+                    Tel: +31-348-407-775
+                    E-mail: bwijnen@lucent.com
+
+                    Editor: Lior Khermosh
+                    Postal: PMC-SIERRA
+                            Kohav Hertzelia bldg,
+                            4 Hasadnaot St.
+                            Hertzliya Pituach 46120,
+                            ISRAEL
+                            P.O.Box 2089 Hertzliya Pituach 46120 Israel
+                    Tel: +972-9-9628000 Ext: 302
+                    E-mail: lior_khermosh@pmc-sierra.com"
+    DESCRIPTION
+            "The objects in this MIB module are used to manage the
+             Ethernet in the First Mile (EFM) Ethernet Passive Optical
+             Network (EPON) Interfaces as defined in IEEE P802.3ah
+             clauses 60, 64, and 65.
+         The following reference is used throughout this MIB module:
+           [802.3ah] refers to:
+             Information technology - Telecommunications and
+             information exchange between systems - Local and
+             metropolitan area networks - Specific requirements -
+             Part 3: Carrier sense multiple access with collision
+             detection (CSMA/CD) access method and physical layer
+             specifications - Media Access Control Parameters,
+             Physical Layers and Management Parameters for subscriber
+             access networks.  IEEE Std 802.3ah-2004, October 2004.
+
+          Of particular interest are clause 64 (Multi-Point Control
+          Protocol - MPCP), clause 65 (Point-to-Multipoint
+          Reconciliation Sublayer - P2MP RS), clause 60 (Ethernet
+          Passive Optical Network Physical Medium Dependent - EPON
+          PMDs), clause 30, 'Management', and clause 45, 'Management
+          Data Input/Output (MDIO) Interface'.
+
+          Copyright (C) The IETF Trust (2007).  This version
+          of this MIB module is part of 4837; see the RFC itself for
+          full legal notices.
+
+          Key abbreviations:
+            BER - Bit Error Rate
+            BW - bandwidth
+
+            CRC - Cyclic Redundancy Check
+            EFM - Ethernet First Mile
+            EPON - Ethernet Passive Optical Network
+            FEC  - Forward Error Correction
+            LLID - Logical Link Identifier
+            MAC - Media Access Control
+            Mbps - Megabit per second
+            MDIO - Management Data Input/Output
+            MPCP - Multi-Point Control Protocol
+            OLT - Optical Line Terminal (Server unit of the EPON)
+            OMP - Optical Multi-Point
+            ONU - Optical Network Unit (Client unit of the EPON)
+            P2MP - Point-to-Multipoint
+            PHY - Physical Layer
+            PMD - Physical Medium Dependent
+            PON - Passive Optical Network
+            RTT - Round Trip Time
+            SLD - Start of LLID Delimiter
+            TQ - Time Quanta
+          "
+
+    REVISION    "200703290000Z"  -- March 29, 2007
+    DESCRIPTION "Initial version, published as RFC 4837."
+    ::= { mib-2 155 }
+
+dot3EponObjects OBJECT IDENTIFIER ::= { dot3EponMIB 1}
+
+dot3EponConformance OBJECT IDENTIFIER ::= { dot3EponMIB 2}
+
+-- MPCP MIB modules definitions ([802.3ah], clause 30.3.5)
+
+dot3EponMpcpObjects
+     OBJECT IDENTIFIER ::= { dot3EponObjects 1 }
+
+dot3MpcpControlTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot3MpcpControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "A Table of dot3 Multi-Point Control Protocol (MPCP)
+             MIB objects.  The entries in the table are control and
+             status objects of the MPCP.
+             Each object has a row for every virtual link denoted by
+             the corresponding ifIndex.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff)."
+    ::= { dot3EponMpcpObjects 1 }
+
+dot3MpcpControlEntry OBJECT-TYPE
+    SYNTAX  Dot3MpcpControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "An entry in the dot3 MPCP Control table.
+             Rows exist for an OLT interface and an ONU interface.
+             A row in the table is denoted by the ifIndex of the link
+             and it is created when the ifIndex is created.
+             The rows in the table for an ONU interface are created
+             at system initialization.
+             The row in the table corresponding to the OLT ifIndex
+             and the row corresponding to the broadcast virtual link
+             are created at system initialization.
+             A row in the table corresponding to the ifIndex of a
+             virtual links is created when a virtual link is
+             established (ONU registers) and deleted when the virtual
+             link is deleted (ONU deregisters)."
+    INDEX  { ifIndex }
+    ::= { dot3MpcpControlTable 1}
+
+Dot3MpcpControlEntry ::=
+    SEQUENCE {
+        dot3MpcpOperStatus                   TruthValue,
+        dot3MpcpAdminState                   TruthValue,
+        dot3MpcpMode                         INTEGER,
+        dot3MpcpSyncTime                     Unsigned32,
+        dot3MpcpLinkID                       Unsigned32,
+        dot3MpcpRemoteMACAddress             MacAddress,
+        dot3MpcpRegistrationState            INTEGER,
+        dot3MpcpTransmitElapsed              Unsigned32,
+        dot3MpcpReceiveElapsed               Unsigned32,
+        dot3MpcpRoundTripTime                Unsigned32,
+        dot3MpcpMaximumPendingGrants         Unsigned32
+    }
+
+dot3MpcpOperStatus OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "This object reflects the operational state of the
+             Multi-Point MAC Control sublayer as defined in
+
+             [802.3ah], clause 64.  When the value is true(1), the
+             interface will act as if the Multi-Point Control Protocol
+             is enabled.  When the value is false(2), the interface
+             will act as if the Multi-Point Control Protocol is
+             disabled.  The operational state can be changed using the
+             dot3MpcpAdminState object.
+             This object is applicable for an OLT, with the same
+             value for all virtual interfaces, and for an ONU."
+    REFERENCE   "[802.3ah], 30.3.5.1.2."
+    ::= { dot3MpcpControlEntry 1 }
+
+dot3MpcpAdminState OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+            "This object is used to define the admin state of the
+             Multi-Point MAC Control sublayer, as defined in
+             [802.3ah], clause 64, and to reflect its state.
+             When selecting the value as true(1), the Multi-Point
+             Control Protocol of the interface is enabled.
+             When selecting the value as false(2), the Multi-Point
+             Control Protocol of the interface is disabled.
+             This object reflects the administrative state of the
+             Multi-Point Control Protocol of the interface.
+             The write operation is not restricted in this document
+             and can be done at any time.  Changing
+             dot3MpcpAdminState state can lead to disabling the
+             Multi-Point Control Protocol on the respective interface,
+             leading to the interruption of service for the users
+             connected to the respective EPON interface.
+             This object is applicable for an OLT, with the same
+             value for all virtual interfaces, and for an ONU."
+    REFERENCE   "[802.3ah], 30.3.5.2.1."
+    DEFVAL { false }
+    ::= { dot3MpcpControlEntry 2 }
+
+dot3MpcpMode  OBJECT-TYPE
+    SYNTAX  INTEGER {
+            olt(1),
+            onu(2)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "This object is used to identify the operational
+             state of the Multi-Point MAC Control sublayer as
+             defined in [802.3ah], clause 64.  Reading olt(1) for an
+
+             OLT (server) mode and onu(2) for an ONU (client) mode.
+             This object is used to identify the operational mode
+             for the MPCP tables.
+             This object is applicable for an OLT, with the same
+             value for all virtual interfaces, and for an ONU."
+    REFERENCE   "[802.3ah], 30.3.5.1.3."
+    DEFVAL { olt }
+    ::= { dot3MpcpControlEntry 3 }
+
+dot3MpcpSyncTime OBJECT-TYPE
+    SYNTAX  Unsigned32
+    UNITS       "TQ (16nsec)"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that reports the 'sync lock time' of the
+             OLT receiver in increments of Time Quanta (TQ)-16ns
+             as defined in [802.3ah], clauses 60, 64, and 65.  The
+             value returned shall be (sync lock time ns)/16.  If
+             this value exceeds (2^32-1), the value (2^32-1) shall
+             be returned.  This object is applicable for an OLT,
+             with the same value for all virtual interfaces, and
+             for an ONU."
+    REFERENCE   "[802.3ah], 64.3.3.2."
+   ::= { dot3MpcpControlEntry 4 }
+
+dot3MpcpLinkID OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that identifies the Logical Link
+             Identifier (LLID) associated with the MAC of the virtual
+             link as specified in [802.3ah], clause 65.1.3.2.2.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             The ONU and the corresponding virtual MAC of the OLT,
+             for the same virtual link, have the same value.
+             Value is assigned when the ONU registers.
+             Value is freed when the ONU deregisters."
+    REFERENCE   "[802.3ah], 30.3.5.1.4."
+    ::= { dot3MpcpControlEntry 5 }
+
+dot3MpcpRemoteMACAddress OBJECT-TYPE
+    SYNTAX  MacAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that identifies the source_address
+             parameter of the last MPCPDUs passed to the MAC Control.
+             This value is updated on reception of a valid frame with
+             1) a destination Field equal to the reserved multicast
+             address for MAC Control as specified in [802.3], Annex
+             31A; 2) the lengthOrType field value equal to the reserved
+             Type for MAC Control as specified in [802.3], Annex
+             31A; 3) an MPCP subtype value equal to the subtype
+             reserved for MPCP as specified in [802.3ah], Annex 31A.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             The value reflects the MAC address of the remote entity
+             and therefore the OLT holds a value for each LLID, which
+             is the MAC address of the ONU; the ONU has a single
+             value that is the OLT MAC address."
+    REFERENCE   "[802.3ah], 30.3.5.1.5."
+    ::= { dot3MpcpControlEntry 6 }
+
+dot3MpcpRegistrationState OBJECT-TYPE
+    SYNTAX  INTEGER {
+            unregistered(1),
+            registering(2),
+            registered(3)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that identifies the registration state
+             of the Multi-Point MAC Control sublayer as defined in
+             [802.3ah], clause 64.  When this object has the
+             enumeration unregistered(1), the interface is
+             unregistered and may be used for registering a link
+             partner.  When this object has the enumeration
+             registering(2), the interface is in the process of
+             registering a link-partner.  When this object has the
+             enumeration registered(3), the interface has an
+             established link-partner.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface."
+    REFERENCE   "[802.3ah], 30.3.5.1.6."
+    ::= { dot3MpcpControlEntry 7 }
+
+dot3MpcpTransmitElapsed OBJECT-TYPE
+    SYNTAX  Unsigned32
+    UNITS       "TQ (16nsec)"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that reports the interval from the last
+             MPCP frame transmission in increments of Time Quanta
+             (TQ)-16ns.  The value returned shall be (interval from
+             last MPCP frame transmission in ns)/16.  If this value
+             exceeds (2^32-1), the value (2^32-1) shall be returned.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface."
+    REFERENCE   "[802.3ah], 30.3.5.1.19."
+    ::= { dot3MpcpControlEntry 8 }
+
+dot3MpcpReceiveElapsed OBJECT-TYPE
+    SYNTAX  Unsigned32
+    UNITS       "TQ (16nsec)"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that reports the interval from last MPCP frame
+             reception in increments of Time Quanta (TQ)-16ns.  The
+             value returned shall be (interval from last MPCP frame
+             reception in ns)/16.  If this value exceeds (2^32-1), the
+             value (2^32-1) shall be returned.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface."
+    REFERENCE   "[802.3ah], 30.3.5.1.20."
+    ::= { dot3MpcpControlEntry 9 }
+
+dot3MpcpRoundTripTime OBJECT-TYPE
+    SYNTAX  Unsigned32 (0..'ffff'h)
+    UNITS       "TQ (16nsec)"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that reports the MPCP round trip time in
+             increments of Time Quanta (TQ)-16ns.  The value returned
+             shall be (round trip time in ns)/16.  If this value
+             exceeds (2^16-1), the value (2^16-1) shall be returned.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface."
+    REFERENCE   "[802.3ah], 30.3.5.1.21."
+    ::= { dot3MpcpControlEntry 10 }
+
+dot3MpcpMaximumPendingGrants OBJECT-TYPE
+    SYNTAX  Unsigned32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that reports the maximum number of grants
+             that an ONU can store for handling.  The maximum number
+
+             of grants that an ONU can store for handling has a
+             range of 0 to 255.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero."
+    REFERENCE   "[802.3ah], 30.3.5.1.24."
+    ::= { dot3MpcpControlEntry 11 }
+
+dot3MpcpStatTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Dot3MpcpStatEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table defines the list of statistics counters of
+             an interface implementing the [802.3ah], clause 64 MPCP.
+             Each object has a row for every virtual link denoted by
+             the corresponding ifIndex.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff)."
+::= { dot3EponMpcpObjects 2 }
+
+dot3MpcpStatEntry OBJECT-TYPE
+    SYNTAX     Dot3MpcpStatEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry in the table of statistics counters of the
+             [802.3ah], clause 64, MPCP interface.
+             Rows exist for an OLT interface and an ONU interface.
+             A row in the table is denoted by the ifIndex of the link
+             and it is created when the ifIndex is created.
+             The rows in the table for an ONU interface are created
+             at system initialization.
+             The row in the table corresponding to the OLT ifIndex
+             and the row corresponding to the broadcast virtual link
+             are created at system initialization.
+             A row in the table corresponding to the ifIndex of a
+             virtual link is created when a virtual link is
+             established (ONU registers) and deleted when the virtual
+             link is deleted (ONU deregisters)."
+    INDEX  { ifIndex}
+    ::= { dot3MpcpStatTable 1 }
+
+Dot3MpcpStatEntry ::=
+
+    SEQUENCE {
+            dot3MpcpMACCtrlFramesTransmitted       Counter64,
+            dot3MpcpMACCtrlFramesReceived          Counter64,
+            dot3MpcpDiscoveryWindowsSent           Counter32,
+            dot3MpcpDiscoveryTimeout               Counter32,
+            dot3MpcpTxRegRequest                   Counter64,
+            dot3MpcpRxRegRequest                   Counter64,
+            dot3MpcpTxRegAck                       Counter64,
+            dot3MpcpRxRegAck                       Counter64,
+            dot3MpcpTxReport                       Counter64,
+            dot3MpcpRxReport                       Counter64,
+            dot3MpcpTxGate                         Counter64,
+            dot3MpcpRxGate                         Counter64,
+            dot3MpcpTxRegister                     Counter64,
+            dot3MpcpRxRegister                     Counter64
+    }
+
+dot3MpcpMACCtrlFramesTransmitted OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of MPCP frames passed to the MAC sublayer for
+             transmission.  This counter is incremented when a
+             MA_CONTROL.request service primitive is generated within
+             the MAC control sublayer with an opcode indicating an
+             MPCP frame.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system, and at other
+             times as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.7."
+    ::= { dot3MpcpStatEntry 1 }
+
+dot3MpcpMACCtrlFramesReceived OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of MPCP frames passed by the MAC sublayer to the
+             MAC Control sublayer.  This counter is incremented when a
+             ReceiveFrame function call returns a valid frame with
+             1) a lengthOrType field value equal to the reserved
+
+             Type for 802.3_MAC_Control as specified in clause 31.4.1.3,
+             and
+             2) an opcode indicating an MPCP frame.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+   REFERENCE   "[802.3ah], 30.3.5.1.8."
+    ::= { dot3MpcpStatEntry 2}
+
+dot3MpcpDiscoveryWindowsSent OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of discovery windows generated.  The counter is
+             incremented by one for each generated discovery window.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+   REFERENCE   "[802.3ah], 30.3.5.1.22."
+    ::= { dot3MpcpStatEntry 3}
+
+dot3MpcpDiscoveryTimeout OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a discovery timeout
+             occurs.  Increment the counter by one for each discovery
+             processing state-machine reset resulting from timeout
+             waiting for message arrival.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+   REFERENCE   "[802.3ah], 30.3.5.1.23."
+    ::= { dot3MpcpStatEntry 4}
+
+dot3MpcpTxRegRequest OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REGISTER_REQ MPCP
+             frame transmission occurs.  Increment the counter by one
+             for each REGISTER_REQ MPCP frame transmitted as defined
+             in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.12."
+    ::= { dot3MpcpStatEntry 5}
+
+dot3MpcpRxRegRequest OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REGISTER_REQ MPCP
+             frame reception occurs.
+             Increment the counter by one for each REGISTER_REQ MPCP
+             frame received as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+  REFERENCE   "[802.3ah], 30.3.5.1.17."
+    ::= { dot3MpcpStatEntry 6}
+
+dot3MpcpTxRegAck OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REGISTER_ACK MPCP
+             frame transmission occurs.  Increment the counter by one
+             for each REGISTER_ACK MPCP frame transmitted as defined
+             in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+ REFERENCE   "[802.3ah], 30.3.5.1.10."
+    ::= { dot3MpcpStatEntry 7}
+
+dot3MpcpRxRegAck OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REGISTER_ACK MPCP
+             frame reception occurs.
+             Increment the counter by one for each REGISTER_ACK MPCP
+             frame received as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.15."
+    ::= { dot3MpcpStatEntry 8}
+
+dot3MpcpTxReport OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REPORT MPCP frame
+             transmission occurs.  Increment the counter by one for
+             each REPORT MPCP frame transmitted as defined in
+             [802.3ah], clause 64.
+
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.13."
+    ::= { dot3MpcpStatEntry 9}
+
+dot3MpcpRxReport OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REPORT MPCP frame
+             reception occurs.
+             Increment the counter by one for each REPORT MPCP frame
+             received as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.18."
+    ::= { dot3MpcpStatEntry 10}
+
+dot3MpcpTxGate OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a GATE MPCP frame
+             transmission occurs.
+             Increment the counter by one for each GATE MPCP frame
+             transmitted as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.9."
+    ::= { dot3MpcpStatEntry 11}
+
+dot3MpcpRxGate OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a GATE MPCP frame
+             reception occurs.
+             Increment the counter by one for each GATE MPCP frame
+             received as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.14."
+    ::= { dot3MpcpStatEntry 12}
+
+dot3MpcpTxRegister OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REGISTER MPCP frame
+             transmission occurs.
+             Increment the counter by one for each REGISTER MPCP
+             frame transmitted as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+   REFERENCE   "[802.3ah], 30.3.5.1.11."
+    ::= { dot3MpcpStatEntry 13}
+
+dot3MpcpRxRegister OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of the number of times a REGISTER MPCP frame
+             reception occurs.
+             Increment the counter by one for each REGISTER MPCP
+             frame received as defined in [802.3ah], clause 64.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.5.1.16."
+    ::= { dot3MpcpStatEntry 14}
+
+-- Optical Multi Point Emulation (OMPEmulation)
+-- managed object definitions
+
+dot3OmpEmulationObjects OBJECT IDENTIFIER ::={dot3EponObjects 2}
+
+dot3OmpEmulationTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot3OmpEmulationEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "A table of dot3 OmpEmulation MIB objects.  The table
+             contain objects for the management of the OMPEmulation
+             sublayer.
+             Each object has a row for every virtual link denoted by
+             the corresponding ifIndex.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff)."
+    ::= { dot3OmpEmulationObjects 1 }
+
+dot3OmpEmulationEntry OBJECT-TYPE
+    SYNTAX  Dot3OmpEmulationEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "An entry in the dot3 OmpEmulation table.
+             Rows exist for an OLT interface and an ONU interface.
+             A row in the table is denoted by the ifIndex of the link
+             and it is created when the ifIndex is created.
+             The rows in the table for an ONU interface are created
+             at system initialization.
+             The row in the table corresponding to the OLT ifIndex
+             and the row corresponding to the broadcast virtual link
+             are created at system initialization.
+             A row in the table corresponding to the ifIndex of a
+             virtual links is created when a virtual link is
+             established (ONU registers) and deleted when the virtual
+             link is deleted (ONU deregisters)."
+    INDEX  { ifIndex }
+    ::= { dot3OmpEmulationTable 1 }
+
+    Dot3OmpEmulationEntry ::=
+    SEQUENCE {
+            dot3OmpEmulationType               INTEGER
+    }
+
+dot3OmpEmulationType OBJECT-TYPE
+    SYNTAX  INTEGER {
+            unknown(1),
+            olt(2),
+            onu(3)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that indicates the mode of operation
+             of the Reconciliation Sublayer for Point-to-Point
+             Emulation (see [802.3ah], clause 65.1).  unknown(1) value
+             is assigned in initialization; true state or type is not
+             yet known.  olt(2) value is assigned when the sublayer is
+             operating in OLT mode.  onu(3) value is assigned when the
+             sublayer is operating in ONU mode.
+             This object is applicable for an OLT, with the same
+             value for all virtual interfaces, and for an ONU."
+    REFERENCE   "[802.3ah], 30.3.7.1.2."
+    ::= { dot3OmpEmulationEntry 1}
+
+dot3OmpEmulationStatTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Dot3OmpEmulationStatEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table defines the list of statistics counters of
+
+             [802.3ah], clause 65, OMPEmulation sublayer.
+             Each object has a row for every virtual link denoted by
+             the corresponding ifIndex.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff)."
+    ::= { dot3OmpEmulationObjects 2}
+
+dot3OmpEmulationStatEntry OBJECT-TYPE
+    SYNTAX     Dot3OmpEmulationStatEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry in the table of statistics counters of
+             [802.3ah], clause 65, OMPEmulation sublayer.
+             Rows exist for an OLT interface and an ONU interface.
+             A row in the table is denoted by the ifIndex of the link
+             and it is created when the ifIndex is created.
+             The rows in the table for an ONU interface are created
+             at system initialization.
+             The row in the table corresponding to the OLT ifIndex
+             and the row corresponding to the broadcast virtual link
+             are created at system initialization.
+             A row in the table corresponding to the ifIndex of a
+             virtual links is created when a virtual link is
+             established (ONU registers) and deleted when the virtual
+             link is deleted (ONU deregisters)."
+    INDEX  { ifIndex}
+    ::= { dot3OmpEmulationStatTable 1 }
+
+Dot3OmpEmulationStatEntry::=
+    SEQUENCE {
+            dot3OmpEmulationSLDErrors                 Counter64,
+            dot3OmpEmulationCRC8Errors                Counter64,
+            dot3OmpEmulationBadLLID                   Counter64,
+            dot3OmpEmulationGoodLLID                  Counter64,
+            dot3OmpEmulationOnuPonCastLLID            Counter64,
+            dot3OmpEmulationOltPonCastLLID            Counter64,
+            dot3OmpEmulationBroadcastBitNotOnuLlid    Counter64,
+            dot3OmpEmulationOnuLLIDNotBroadcast       Counter64,
+            dot3OmpEmulationBroadcastBitPlusOnuLlid    Counter64,
+            dot3OmpEmulationNotBroadcastBitNotOnuLlid  Counter64
+    }
+
+dot3OmpEmulationSLDErrors OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that do not contain a valid
+             SLD field as defined in [802.3ah], clause 65.1.3.3.1.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.7.1.3."
+    ::= { dot3OmpEmulationStatEntry 1}
+
+dot3OmpEmulationCRC8Errors OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause 65.1.3.3.1, but do
+             not pass the CRC-8 check as defined in [802.3ah], clause
+             65.1.3.3.3.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.7.1.4."
+    ::= { dot3OmpEmulationStatEntry 2}
+
+dot3OmpEmulationBadLLID OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause 65.1.3.3.1, and
+             pass the CRC-8 check, as defined in [802.3ah], clause
+             65.1.3.3.3, but are discarded due to the LLID check as
+             defined in [802.3ah], clause 65.1.3.3.2.
+
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.7.1.8."
+    ::= { dot3OmpEmulationStatEntry 3}
+
+dot3OmpEmulationGoodLLID OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause 65.1.3.3.1, and
+             pass the CRC-8 check as defined in [802.3ah], clause
+             65.1.3.3.3.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.3.7.1.5."
+    ::= { dot3OmpEmulationStatEntry 4}
+
+dot3OmpEmulationOnuPonCastLLID OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause 65.1.3.3.1,
+             pass the CRC-8 check, as defined in [802.3ah], clause
+             65.1.3.3.3, and meet the rules of acceptance for an
+             ONU defined in [802.3ah], clause 65.1.3.3.2.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+
+             module."
+    REFERENCE   "[802.3ah], 30.3.7.1.6."
+    ::= { dot3OmpEmulationStatEntry 5}
+
+dot3OmpEmulationOltPonCastLLID OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause 65.1.3.3.1,
+             pass the CRC-8 check, as defined in [802.3ah], clause
+             65.1.3.3.3, and meet the rules of acceptance for an
+             OLT defined in [802.3ah], 65.1.3.3.2.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the ONU, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+  REFERENCE   "[802.3ah], 30.3.7.1.7."
+    ::= { dot3OmpEmulationStatEntry 6}
+
+dot3OmpEmulationBroadcastBitNotOnuLlid OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause
+             65.1.3.3.1, pass the CRC-8 check, as defined in
+             [802.3ah], clause 65.1.3.3.3, and contain the broadcast
+             bit in the LLID and not the ONU's LLID (frame accepted)
+             as defined in [802.3ah], clause 65.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+   ::= { dot3OmpEmulationStatEntry 7}
+
+dot3OmpEmulationOnuLLIDNotBroadcast OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause
+             65.1.3.3.1, pass the CRC-8 check, as defined in
+             [802.3ah], clause 65.1.3.3.3, and contain the ONU's LLID
+             as defined in [802.3ah], clause 65.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+   ::= { dot3OmpEmulationStatEntry 8}
+
+dot3OmpEmulationBroadcastBitPlusOnuLlid OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause
+             65.1.3.3.1, pass the CRC-8 check, as defined in
+             [802.3ah], clause 65.1.3.3.3, and contain the broadcast
+             bit in the LLID and match the ONU's LLID (frame
+             reflected) as defined in [802.3ah], clause 65.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    ::= { dot3OmpEmulationStatEntry 9}
+
+dot3OmpEmulationNotBroadcastBitNotOnuLlid OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "frames"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A count of frames received that contain a valid SLD
+             field, as defined in [802.3ah], clause
+             65.1.3.3.1, pass the CRC-8 check, as defined in
+             [802.3ah], clause 65.1.3.3.3, and do not contain
+             the ONU's LLID as defined in [802.3ah], clause 65.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             At the OLT, the value should be zero.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    ::= { dot3OmpEmulationStatEntry 10}
+
+--  FEC managed object definitions (30.5.1)
+
+dot3EponFecObjects OBJECT IDENTIFIER ::={dot3EponObjects 3}
+
+dot3EponFecTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot3EponFecEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "A table of dot3 EPON FEC management objects.
+             The entries in the table are control and status objects
+             and statistic counters for the FEC layer.
+             Each object has a row for every virtual link denoted by
+             the corresponding ifIndex.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff)."
+    ::= { dot3EponFecObjects 1 }
+
+dot3EponFecEntry OBJECT-TYPE
+    SYNTAX  Dot3EponFecEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "An entry in the dot3 EPON FEC table.
+             Rows exist for an OLT interface and an ONU interface.
+             A row in the table is denoted by the ifIndex of the link
+             and it is created when the ifIndex is created.
+             The rows in the table for an ONU interface are created
+
+             at system initialization.
+             The row in the table corresponding to the OLT ifIndex
+             and the row corresponding to the broadcast virtual link
+             are created at system initialization.
+             A row in the table corresponding to the ifIndex of a
+             virtual links is created when a virtual link is
+             established (ONU registers) and deleted when the virtual
+             link is deleted (ONU deregisters)."
+    INDEX  { ifIndex}
+    ::= { dot3EponFecTable 1 }
+
+Dot3EponFecEntry ::=
+    SEQUENCE {
+            dot3EponFecPCSCodingViolation           Counter64,
+            dot3EponFecAbility                      INTEGER,
+            dot3EponFecMode                         INTEGER,
+            dot3EponFecCorrectedBlocks              Counter64,
+            dot3EponFecUncorrectableBlocks          Counter64,
+            dot3EponFecBufferHeadCodingViolation    Counter64
+    }
+
+dot3EponFecPCSCodingViolation OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "octets"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "For a 100 Mbps operation, it is a count of the number of
+             times an invalid code-group is received, other than the
+             /H/ code-group.  For a 1000 Mbps operation, it is a count
+             of the number of times an invalid codegroup is received,
+             other than the /V/ code-group.  /H/ denotes a special
+             4b5b codeword of [802.3] 100 Mbps PCS layer (clause 24),
+             and /V/ denotes a special 8b10b codeword of the [802.3]
+             1000 Mbps PCS layer (clause 36).
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.5.1.1.12."
+    ::= { dot3EponFecEntry 1}
+
+dot3EponFecAbility OBJECT-TYPE
+    SYNTAX  INTEGER {
+            unknown(1),
+            supported(2),
+            unsupported(3)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object that indicates the support of operation of the
+             optional FEC sublayer of the 1000BASE-PX PHY specified
+             in [802.3ah], clause 65.2.
+             unknown(1) value is assigned in the initialization, for non
+             FEC support state or type not yet known.  unsupported(3)
+             value is assigned when the sublayer is not supported.
+             supported(2) value is assigned when the sublayer is
+             supported.
+             This object is applicable for an OLT, with the same
+             value for all virtual interfaces, and for an ONU.
+             The FEC counters will have a zero value when the
+             interface is not supporting FEC.
+             The counters:
+              dot3EponFecPCSCodingViolation - not affected by FEC
+              ability.
+              dot3EponFecCorrectedBlocks    - has a zero value when
+               dot3EponFecAbility is unknown(1) and unsupported(3).
+              dot3EponFecUncorrectableBlocks  - has a zero value when
+               dot3EponFecAbility is unknown(1) and unsupported(3).
+              dot3EponFecBufferHeadCodingViolation - has a zero value
+               when dot3EponFecAbility is unknown(1) and
+               unsupported(3)."
+    REFERENCE   "[802.3ah], 30.5.1.1.13."
+    ::= { dot3EponFecEntry 2}
+
+dot3EponFecMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+            unknown(1),
+            disabled(2),
+            enabled(3)
+    }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+            "An object that defines the mode of operation of the
+             optional FEC sublayer of the 1000BASE-PX PHY, specified
+             in [802.3ah], clause 65.2, and reflects its state.
+             A GET operation returns the current mode of operation
+             of the PHY.  A SET operation changes the mode of
+             operation of the PHY to the indicated value.
+             unknown(1) value is assigned in the initialization for non
+               FEC support state or type not yet known.
+
+             disabled(2) value is assigned when the FEC sublayer is
+               operating in disabled mode.
+             enabled(3) value is assigned when the FEC sublayer is
+               operating in FEC mode.
+             The write operation is not restricted in this document
+             and can be done at any time.  Changing dot3EponFecMode
+             state can lead to disabling the Forward Error Correction
+             on the respective interface, which can lead to a
+             degradation of the optical link, and therefore may lead
+             to an interruption of service for the users connected to
+             the respective EPON interface.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             The counting of
+             the FEC counters will stop when the FEC of the interface
+             is disabled.
+             The counters:
+              dot3EponFecPCSCodingViolation - not affected by FEC
+              mode.
+              dot3EponFecCorrectedBlocks - stops counting when
+              Rx_FEC is not enabled.  (unknown(1) and disabled(2)).
+              dot3EponFecUncorrectableBlocks - stops counting when
+              Rx_FEC is not enabled (unknown(1) and disabled(2)).
+              dot3EponFecBufferHeadCodingViolation - stops counting
+              when Rx_FEC is not enabled (unknown(1) and
+              disabled(2)).
+             The object:
+              dot3EponFecAbility - indicates the FEC ability and
+              is not affected by the dot3EponFecMode object."
+    REFERENCE   "[802.3ah], 30.5.1.1.14."
+    DEFVAL { unknown }
+    ::= { dot3EponFecEntry 3}
+
+dot3EponFecCorrectedBlocks OBJECT-TYPE
+    SYNTAX  Counter64
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "For 10PASS-TS, 2BASE-TL, and 1000BASE-PX PHYs, it is a
+             count of corrected FEC blocks.  This counter will not
+             increment for other PHY Types.  Increment the counter by
+             one for each received block that is corrected by the FEC
+             function in the PHY.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.5.1.1.15."
+    ::= { dot3EponFecEntry 4}
+
+dot3EponFecUncorrectableBlocks OBJECT-TYPE
+    SYNTAX  Counter64
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "For 10PASS-TS, 2BASE-TL, and 1000BASE-PX PHYs, it is a
+             count of uncorrectable FEC blocks.  This counter will not
+             increment for other PHY Types.  Increment the counter by
+             one for each FEC block that is determined to be
+             uncorrectable by the FEC function in the PHY.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    REFERENCE   "[802.3ah], 30.5.1.1.16."
+    ::= { dot3EponFecEntry 5}
+
+dot3EponFecBufferHeadCodingViolation OBJECT-TYPE
+    SYNTAX  Counter64
+    UNITS      "octets"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "For a 1000 Mbps operation, it is a count of the number of
+             invalid code-group received directly from the link.  The
+             value has a meaning only in 1000 Mbps mode and it is
+             zero otherwise.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             Discontinuities of this counter can occur at
+             re-initialization of the management system and at other
+             times, as indicated by the value of the
+             ifCounterDiscontinuityTime object of the Interface MIB
+             module."
+    ::= { dot3EponFecEntry 6}
+
+-- ExtendedPackage managed object definitions
+
+dot3ExtPkgObjects OBJECT IDENTIFIER ::={dot3EponObjects 4}
+
+dot3ExtPkgControlObjects OBJECT IDENTIFIER ::= { dot3ExtPkgObjects 1}
+
+dot3ExtPkgControlTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot3ExtPkgControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "A table of Extended package Control management
+             objects.  Entries in the table are control and status
+             indication objects of an EPON interface, which are
+             gathered in an extended package as an addition to the
+             objects based on the [802.3ah], clause 30, attributes.
+             Each object has a row for every virtual link denoted by
+             the corresponding ifIndex.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff)."
+    ::= { dot3ExtPkgControlObjects 1 }
+
+dot3ExtPkgControlEntry OBJECT-TYPE
+    SYNTAX  Dot3ExtPkgControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "An entry in the Extended package Control table.
+             Rows exist for an OLT interface and an ONU interface.
+             A row in the table is denoted by the ifIndex of the link
+             and it is created when the ifIndex is created.
+             The rows in the table for an ONU interface are created
+             at system initialization.
+             The row in the table corresponding to the OLT ifIndex
+             and the row corresponding to the broadcast virtual link
+             are created at system initialization.
+             A row in the table corresponding to the ifIndex of a
+             virtual links is created when a virtual link is
+             established (ONU registers) and deleted when the virtual
+             link is deleted (ONU deregisters)."
+    INDEX  { ifIndex}
+    ::= { dot3ExtPkgControlTable 1 }
+
+Dot3ExtPkgControlEntry ::=
+    SEQUENCE {
+     dot3ExtPkgObjectReset                       INTEGER,
+     dot3ExtPkgObjectPowerDown                   TruthValue,
+     dot3ExtPkgObjectNumberOfLLIDs               Unsigned32,
+     dot3ExtPkgObjectFecEnabled                  INTEGER,
+     dot3ExtPkgObjectReportMaximumNumQueues      Unsigned32,
+     dot3ExtPkgObjectRegisterAction              INTEGER
+    }
+
+dot3ExtPkgObjectReset OBJECT-TYPE
+    SYNTAX  INTEGER {
+            running(1),
+            reset(2)
+    }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+            "This object is used to reset the EPON interface.  The
+             interface may be unavailable while the reset occurs and
+             data may be lost.
+             Setting this object to running(1) will cause the
+             interface to enter into running mode.  Setting this
+             object to reset(2) will cause the interface to go into
+             reset mode.  When getting running(1), the interface is in
+             running mode.  When getting reset(2), the interface is in
+             reset mode.
+             The write operation is not restricted in this document
+             and can be done at any time.  Changing
+             dot3ExtPkgObjectReset state can lead to a reset of the
+             respective interface, leading to an interruption of
+             service for the users connected to the respective EPON
+             interface.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             A reset for a specific virtual interface resets only
+             this virtual interface and not the physical interface.
+             Thus, a virtual link that is malfunctioning can be
+             reset without affecting the operation of other virtual
+             interfaces.
+             The reset can cause Discontinuities in the values of the
+             counters of the interface, similar to re-initialization
+             of the management system.  Discontinuity should be
+             indicated by the ifCounterDiscontinuityTime object of
+             the Interface MIB module."
+    DEFVAL { running }
+    ::= { dot3ExtPkgControlEntry 1 }
+
+dot3ExtPkgObjectPowerDown OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+            "This object is used to power down the EPON interface.
+             The interface may be unavailable while the power down
+             occurs and data may be lost.
+             Setting this object to true(1) will cause the interface
+             to enter into power down mode.  Setting this object to
+             false(2) will cause the interface to go out of power
+             down mode.  When getting true(1), the interface is in
+             power down mode.  When getting false(2), the interface is
+             not in power down mode.
+             The write operation is not restricted in this document
+             and can be done at any time.  Changing
+             dot3ExtPkgObjectPowerDown state can lead to a power down
+             of the respective interface, leading to an interruption
+             of service of the users connected to the respective EPON
+             interface.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface.
+             A power down/up of a specific virtual interface affects
+             only the virtual interface and not the physical
+             interface.  Hence a virtual link, which needs a certain
+             handling, can be powered down and then powered up without
+             disrupting the operation of other virtual interfaces.
+             The object is relevant when the admin state of the
+             interface is active as set by the dot3MpcpAdminState."
+    DEFVAL { false }
+    ::= { dot3ExtPkgControlEntry 2 }
+
+dot3ExtPkgObjectNumberOfLLIDs OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "A read only object that indicates the number of
+             registered LLIDs.  The initialization value is 0.
+             This object is applicable for an OLT with the same
+             value for all virtual interfaces and for an ONU.
+             The LLID field, as defined in the [802.3ah], is a 2-byte
+             register (15-bit field and a broadcast bit) limiting the
+             number of virtual links to 32768.  Typically the number
+             of expected virtual links in a PON is like the number of
+             ONUs, which is 32-64, plus an additional entry for
+             broadcast LLID (with a value of 0xffff).  At the ONU the
+             number of LLIDs for an interface is one."
+    ::= { dot3ExtPkgControlEntry 3 }
+
+dot3ExtPkgObjectFecEnabled OBJECT-TYPE
+    SYNTAX  INTEGER {
+            noFecEnabled(1),
+            fecTxEnabled(2),
+            fecRxEnabled(3),
+            fecTxRxEnabled(4)
+    }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+           "An object defining the FEC mode of operation of the
+            interface, and indicating its state.  The modes defined in
+            this object are extensions to the FEC modes defined in
+            the dot3EponFecMode object.
+            When noFECEnabled(1), the interface does not enable FEC
+            mode.
+            When fecTxEnabled(2), the interface enables the FEC
+            transmit mode.
+            When fecRxEnabled(3), the interface enables the FEC
+            receive mode.
+            When fecTxRxEnabled(4), the interface enables the FEC
+            transmit and receive mode.
+            This object is applicable for an OLT and an ONU.  At the
+            OLT, it has a distinct value for each virtual interface.
+            The FEC counters are referring to the receive path.  The
+            FEC counters will stop when the FEC receive mode of the
+            interface is disabled, as defined by fecRxEnabled(3)
+            and fecTxRxEnabled(4) values.
+            The counters:
+             dot3EponFecPCSCodingViolation - not affected by FEC
+             mode.
+             dot3EponFecCorrectedBlocks - stops counting when
+             Rx_FEC is not enabled (noFecEnabled(1) and
+             fecTxEnabled(2)).
+             dot3EponFecUncorrectableBlocks - stops counting when
+             Rx_FEC is not enabled (noFecEnabled(1) and
+             fecTxEnabled(2)).
+             dot3EponFecBufferHeadCodingViolation - stops counting
+             when Rx_FEC is not enabled (noFecEnabled(1) and
+             fecTxEnabled(2)).
+            The objects:
+             dot3EponFecAbility - indicates the FEC ability and is
+             not affected by the FEC mode.
+             dot3EponFecMode - indicates the FEC mode for combined RX
+             and TX.
+            The write operation is not restricted in this document
+            and can be done at any time.  Changing
+            dot3ExtPkgObjectFecEnabled state can lead to disabling
+            the Forward Error Correction on the respective interface,
+            which can lead to a degradation of the optical link, and
+            therefore may lead to an interruption of service for the
+
+            users connected to the respective EPON interface."
+    DEFVAL { noFecEnabled }
+    ::= { dot3ExtPkgControlEntry 4 }
+
+dot3ExtPkgObjectReportMaximumNumQueues OBJECT-TYPE
+    SYNTAX  Unsigned32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "An object, that defines the maximal number of queues in
+             the REPORT message as defined in [802.3ah], clause 64.  For
+             further information please see the description of the
+             queue table.
+             This object is applicable for an OLT and an ONU.  At the
+             OLT, it has a distinct value for each virtual interface."
+    DEFVAL { 0 }
+    ::= { dot3ExtPkgControlEntry 5 }
+
+dot3ExtPkgObjectRegisterAction OBJECT-TYPE
+    SYNTAX  INTEGER {
+            none(1),
+            register(2),
+            deregister(3),
+            reregister(4)
+    }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+           "An object configuring the registration state of an
+           interface, and indicating its registration state.
+            Write operation changes the registration state to its new
+            value.
+            Read operation returns the value of the state.
+            The registration state is reflected in this object and in
+            the dot3MpcpRegistrationState object.
+            none(1) indicates an unknown state,
+            register(2) indicates a registered LLID,
+            deregister(3) indicates a deregistered LLID,
+            reregister(4) indicates an LLID that is reregistering.
+            The following list describes the operation of the
+            interface, as specified in the [802.3ah], when a write
+            operation is setting a value.
+             none(1) - not doing any action.
+             register(2) - registering an LLID that has been requested
+             for registration (The LLID is in registering mode.
+               dot3MpcpRegistrationState - registering(2) ).
+               deregister(3) - deregisters an LLID that is registered
+                 (dot3MpcpRegistrationState - registered(3) ).
+
+               reregister(4) - reregister an LLID that is registered
+                 (dot3MpcpRegistrationState - registered(3) ).
+               The behavior of an ONU and OLT interfaces, at each one
+               of the detailed operation at each state, is described in
+               the registration state machine of figure 64-22,
+               [802.3ah].
+              This object is applicable for an OLT and an ONU.  At the
+              OLT, it has a distinct value for each virtual interface.
+              The write operation is not restricted in this document
+              and can be done at any time.  Changing
+              dot3ExtPkgObjectRegisterAction state can lead to a change
+              in the registration state of the respective interface
+              leading to a deregistration and an interruption of
+              service of the users connected to the respective EPON
+              interface."
+      DEFVAL { none }
+      ::= { dot3ExtPkgControlEntry 6 }
+
+  dot3ExtPkgQueueTable OBJECT-TYPE
+      SYNTAX  SEQUENCE OF Dot3ExtPkgQueueEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "A table of the extended package objects for queue
+               management.  The [802.3ah] MPCP defines a report message
+               of the occupancy of the transmit queues for the feedback
+               BW request from the ONUs.  These queues serve the uplink
+               transmission of the ONU and data is gathered there until
+               the ONU is granted for transmission.
+               The management table of the queues is added here mainly
+               to control the reporting and to gather some statistics
+               of their operation.  This table is not duplicating
+               existing management objects of bridging queues,
+               specified in [802.1d], since the existence of a
+               dedicated transmit queuing mechanism is implied in the
+               [802.3ah], and the ONU may be a device that is not a
+               bridge with embedded bridging queues.
+               The format of the REPORT message, as specified
+               in [802.3], is presented below:
+               +-----------------------------------+
+               |          Destination Address      |
+               +-----------------------------------+
+               |          Source Address           |
+               +-----------------------------------+
+               |          Length/Type              |
+               +-----------------------------------+
+               |          OpCode                   |
+               +-----------------------------------+
+
+               |          TimeStamp                |
+               +-----------------------------------+
+               |          Number of queue Sets     |
+               +-----------------------------------+   /|\
+               |          Report bitmap            |    |
+               +-----------------------------------+    |
+               |          Queue 0 report           |    |
+               +-----------------------------------+    | repeated for
+               |          Queue 1 report           |    | every
+               +-----------------------------------+    | queue_set
+               |          Queue 2 report           |    |
+               +-----------------------------------+    |
+               |          Queue 3 report           |    |
+               +-----------------------------------+    |
+               |          Queue 4 report           |    |
+               +-----------------------------------+    |
+               |          Queue 5 report           |    |
+               +-----------------------------------+    |
+               |          Queue 6 report           |    |
+               +-----------------------------------+    |
+               |          Queue 7 report           |    |
+               +-----------------------------------+   \|/
+               |          Pad/reserved             |
+               +-----------------------------------+
+               |          FCS                      |
+               +-----------------------------------+
+
+               The 'Queue report' field reports the occupancy of each
+               uplink transmission queue.
+               The number of queue sets defines the number of the
+               reported sets, as would be explained in the description
+               of the dot3ExtPkgQueueSetsTable table.  For each set the
+               report bitmap defines which queue is present in the
+               report, meaning that although the MPCP REPORT message
+               can report up to 8 queues in a REPORT message, the
+               actual number is flexible.  The Queue table has a
+               variable size that is limited by the
+               dot3ExtPkgObjectReportMaximumNumQueues object, as an
+               ONU can have fewer queues to report.
+               The entries in the table are control and status
+               indication objects for managing the queues of an EPON
+               interface that are gathered in an extended package as
+               an addition to the objects that are based on the
+               [802.3ah] attributes.
+               Each object has a row for every virtual link and for
+               every queue in the report.
+               The LLID field, as defined in the [802.3ah], is a 2-byte
+               register (15-bit field and a broadcast bit) limiting the
+
+               number of virtual links to 32768.  Typically the number
+               of expected virtual links in a PON is like the number of
+               ONUs, which is 32-64, plus an additional entry for
+               broadcast LLID (with a value of 0xffff).
+               The number of queues is between 0 and 7 and limited by
+               dot3ExtPkgObjectReportMaximumNumQueues."
+      ::= { dot3ExtPkgControlObjects 2 }
+
+  dot3ExtPkgQueueEntry OBJECT-TYPE
+      SYNTAX  Dot3ExtPkgQueueEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "An entry in the Extended package Queue table.  At the
+               OLT, the rows exist for each ifIndex and dot3QueueIndex.
+               At the ONU, rows exist for the single ifIndex for each
+               dot3QueueIndex.
+               Rows in the table are created when the ifIndex of the
+               link is created.  A set of rows per queue are added for
+               each ifIndex, denoted by the dot3QueueIndex.
+               A set of rows per queue in the table, for an ONU
+               interface, are created at the system initialization.
+               A set of rows per queue in the table, corresponding to
+               the OLT ifIndex and a set of rows per queue
+               corresponding to the broadcast virtual link, are
+               created at the system initialization.
+               A set of rows per queue in the table, corresponding to
+               the ifIndex of a virtual link, are created when the
+               virtual link is established (ONU registers), and deleted
+               when the virtual link is deleted (ONU deregisters)."
+      INDEX  { ifIndex, dot3QueueIndex }
+      ::= { dot3ExtPkgQueueTable 1 }
+
+  Dot3ExtPkgQueueEntry ::=
+      SEQUENCE {
+       dot3QueueIndex                              Unsigned32,
+       dot3ExtPkgObjectReportNumThreshold           Unsigned32,
+       dot3ExtPkgObjectReportMaximumNumThreshold    Unsigned32,
+       dot3ExtPkgStatTxFramesQueue                  Counter64,
+       dot3ExtPkgStatRxFramesQueue                  Counter64,
+       dot3ExtPkgStatDroppedFramesQueue             Counter64
+      }
+
+  dot3QueueIndex OBJECT-TYPE
+      SYNTAX  Unsigned32 (0..7)
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "An object that identifies an index for the queue table
+               reflecting the queue index of the queues that are
+               reported in the MPCP REPORT message as defined in
+               [802.3ah], clause 64.
+               The number of queues is between 0 and 7, and limited by
+               dot3ExtPkgObjectReportMaximumNumQueues."
+      ::= { dot3ExtPkgQueueEntry 1 }
+
+  dot3ExtPkgObjectReportNumThreshold OBJECT-TYPE
+      SYNTAX  Unsigned32 (0..7)
+      MAX-ACCESS  read-write
+      STATUS  current
+      DESCRIPTION
+              "An object that defines the number of thresholds for each
+               queue in the REPORT message as defined in [802.3ah],
+               clause 64.
+               Each queue_set reporting will provide information on the
+               queue occupancy of frames below the matching Threshold.
+               Read operation reflects the number of thresholds.
+               Write operation sets the number of thresholds for each
+               queue.
+               The write operation is not restricted in this document
+               and can be done at any time.  Value cannot exceed the
+               maximal value defined by the
+               dot3ExtPkgObjectReportMaximumNumThreshold object.
+               Changing dot3ExtPkgObjectReportNumThreshold can lead to
+               a change in the reporting of the ONU interface and
+               therefore to a change in the bandwidth allocation of the
+               respective interface.  This change may lead a degradation
+               or an interruption of service of the users connected to
+               the respective EPON interface.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface
+               and for each queue.  At the ONU, it has a distinct value
+               for each queue."
+      DEFVAL { 0 }
+      ::= { dot3ExtPkgQueueEntry 2 }
+
+  dot3ExtPkgObjectReportMaximumNumThreshold OBJECT-TYPE
+      SYNTAX  Unsigned32 (0..7)
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+              "An object, that defines the maximal number of thresholds
+               for each queue in the REPORT message as defined in
+               [802.3ah], clause 64.  Each queue_set reporting will
+               provide information on the queue occupancy of frames
+               below the matching Threshold.
+
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface
+               and for each queue.  At the ONU, it has a distinct value
+               for each queue."
+      DEFVAL { 0 }
+      ::= { dot3ExtPkgQueueEntry 3 }
+
+   dot3ExtPkgStatTxFramesQueue OBJECT-TYPE
+      SYNTAX  Counter64
+      UNITS      "frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+              "A count of the number of times a frame transmission
+               occurs from the corresponding 'Queue'.
+               Increment the counter by one for each frame transmitted,
+               which is an output of the 'Queue'.
+               The 'Queue' marking matches the REPORT MPCP message
+               Queue field as defined in [802.3ah], clause 64.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface
+               and for each queue.  At the ONU, it has a distinct value
+               for each queue.
+               At the OLT the value should be zero.
+               Discontinuities of this counter can occur at
+               re-initialization of the management system and at other
+               times, as indicated by the value of the
+               ifCounterDiscontinuityTime object of the Interface MIB
+               module."
+      ::= { dot3ExtPkgQueueEntry 4}
+
+  dot3ExtPkgStatRxFramesQueue OBJECT-TYPE
+      SYNTAX  Counter64
+      UNITS      "frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+              "A count of the number of times a frame reception
+               occurs from the corresponding 'Queue'.
+               Increment the counter by one for each frame received,
+               which is an input to the corresponding 'Queue'.
+               The 'Queue' marking matches the REPORT MPCP message
+               Queue field as defined in [802.3ah], clause 64.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface
+               and for each queue.  At the ONU, it has a distinct value
+               for each queue.
+               Discontinuities of this counter can occur at
+
+               re-initialization of the management system and at other
+               times, as indicated by the value of the
+               ifCounterDiscontinuityTime object of the Interface MIB
+               module."
+      ::= { dot3ExtPkgQueueEntry 5}
+
+  dot3ExtPkgStatDroppedFramesQueue OBJECT-TYPE
+      SYNTAX  Counter64
+      UNITS      "frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+               "A count of the number of times a frame drop
+               occurs from the corresponding 'Queue'.
+               Increment the counter by one for each frame dropped
+               from the corresponding 'Queue'.
+               The 'Queue' marking matches the REPORT MPCP message
+               Queue field as defined in [802.3ah], clause 64.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface
+               and for each queue.  At the ONU, it has a distinct value
+               for each queue.
+               At the OLT, the value should be zero.
+               Discontinuities of this counter can occur at
+               re-initialization of the management system and at other
+               times, as indicated by the value of the
+               ifCounterDiscontinuityTime object of the Interface MIB
+               module."
+     ::= { dot3ExtPkgQueueEntry 6}
+
+  dot3ExtPkgQueueSetsTable OBJECT-TYPE
+      SYNTAX  SEQUENCE OF Dot3ExtPkgQueueSetsEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "A table of Extended package objects used for the
+               management of the queue_sets.  Entries are control and
+               status indication objects of an EPON interface, which
+               are gathered in an extended package as an addition to
+               the objects based on the [802.3ah] attributes.  The
+               objects in this table are specific for the queue_sets,
+               which are reported in the MPCP REPORT message as defined
+               in [802.3ah], clause 64.
+               The [802.3ah] MPCP defines a report message of the
+               occupancy of the transmit queues for the feedback BW
+               request from the ONUs.  These queues serve the uplink
+               transmission of the ONU and data is gathered there until
+               the ONU is granted for transmission.
+
+               The management table of the queues_sets is added here
+               mainly to control the reporting and to gather some
+               statistics of their operation.  This table is not
+               duplicating existing management objects of bridging
+               queues, specified in [802.1d], since the existence of a
+               dedicated transmit queuing mechanism is implied in the
+               [802.3ah], and the ONU may be a device that is not a
+               bridge with embedded bridging queues.
+               The format of the REPORT message, as specified
+               in [802.3], is presented below:
+               +-----------------------------------+
+               |          Destination Address      |
+               +-----------------------------------+
+               |          Source Address           |
+               +-----------------------------------+
+               |          Length/Type              |
+               +-----------------------------------+
+               |          OpCode                   |
+               +-----------------------------------+
+               |          TimeStamp                |
+               +-----------------------------------+
+               |          Number of queue Sets     |
+               +-----------------------------------+   /|\
+               |          Report bitmap            |    |
+               +-----------------------------------+    |
+               |          Queue 0 report           |    |
+               +-----------------------------------+    | repeated for
+               |          Queue 1 report           |    | every
+               +-----------------------------------+    | queue_set
+               |          Queue 2 report           |    |
+               +-----------------------------------+    |
+               |          Queue 3 report           |    |
+               +-----------------------------------+    |
+               |          Queue 4 report           |    |
+               +-----------------------------------+    |
+               |          Queue 5 report           |    |
+               +-----------------------------------+    |
+               |          Queue 6 report           |    |
+               +-----------------------------------+    |
+               |          Queue 7 report           |    |
+               +-----------------------------------+   \|/
+               |          Pad/reserved             |
+               +-----------------------------------+
+               |          FCS                      |
+               +-----------------------------------+
+
+               As can be seen from the message format, the ONU
+               interface reports of the status of up to 8 queues
+
+               and it can report in a single MPCP REPORT message
+               of a few sets of queues.
+               The number of queue_sets defines the number of the
+               reported sets, and it can reach a value of up to 8.
+               It means that an ONU can hold a variable number of
+               sets between 0 and 7.
+               The dot3ExtPkgQueueSetsTable table has a variable
+               queue_set size that is limited by the
+               dot3ExtPkgObjectReportMaximumNumThreshold object as an
+               ONU can have fewer queue_sets to report.
+               The 'Queue report' field reports the occupancy of each
+               uplink transmission queue.  The queue_sets can be used to
+               report the occupancy of the queues in a few levels as to
+               allow granting, in an accurate manner, of only part of
+               the data available in the queues.  A Threshold is
+               defined for each queue_set to define the level of the
+               queue that is counted for the report of the occupancy.
+               The threshold is reflected in the queue_set table by the
+               dot3ExtPkgObjectReportThreshold object.
+               For each queue set, the report bitmap defines which
+               queues are present in the report, meaning that
+               although the MPCP REPORT message can report of up to 8
+               queues in a REPORT message, the actual number is
+               flexible.
+               The dot3ExtPkgQueueSetsTable table has a variable queue
+               size that is limited by the
+               dot3ExtPkgObjectReportMaximumNumQueues object as an ONU
+               can have fewer queues to report.
+               Each object has a row for every virtual link, for each
+               queue in the report and for each queue_set in the queue.
+               The LLID field, as defined in the [802.3ah], is a 2-byte
+               register (15-bit field and a broadcast bit) limiting the
+               number of virtual links to 32768.  Typically the number
+               of expected virtual links in a PON is like the number of
+               ONUs, which is 32-64, plus an additional entry for
+               broadcast LLID (with a value of 0xffff).
+               The number of queues is between 0 and 7 and limited by
+               dot3ExtPkgObjectReportMaximumNumQueues.
+               The number of queues_sets is between 0 and 7 and limited
+               by dot3ExtPkgObjectReportMaximumNumThreshold."
+      ::= { dot3ExtPkgControlObjects 3 }
+
+  dot3ExtPkgQueueSetsEntry OBJECT-TYPE
+      SYNTAX  Dot3ExtPkgQueueSetsEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "An entry in the Extended package queue_set table.  At
+
+               the OLT, the rows exist for each ifIndex,
+               dot3QueueSetQueueIndex and dot3QueueSetIndex.  At the
+               ONU, rows exist for the single ifIndex, for each
+               dot3QueueSetQueueIndex and dot3QueueSetIndex.
+               Rows in the table are created when the ifIndex of the
+               link is created.  A set of rows per queue and per
+               queue_set are added for each ifIndex, denoted by
+               dot3QueueSetIndex and dot3QueueSetQueueIndex.
+               A set of rows per queue and per queue_set in the table,
+               for an ONU interface are created at system
+               initialization.
+               A set of rows per queue and per queue_Set in the table,
+               corresponding to the OLT ifIndex and a set of rows per
+               queue and per queue_set, corresponding to the broadcast
+               virtual link, are created at system initialization.
+               A set of rows per queue and per queue_set in the table,
+               corresponding to the ifIndex of a virtual link are
+               created when the virtual link is established (ONU
+               registers) and deleted when the virtual link is deleted
+               (ONU deregisters)."
+               INDEX { ifIndex,
+              dot3QueueSetQueueIndex,dot3QueueSetIndex}
+      ::= { dot3ExtPkgQueueSetsTable 1 }
+
+  Dot3ExtPkgQueueSetsEntry ::=
+      SEQUENCE {
+       dot3QueueSetQueueIndex                      Unsigned32,
+       dot3QueueSetIndex                           Unsigned32,
+       dot3ExtPkgObjectReportThreshold             Unsigned32
+      }
+
+  dot3QueueSetQueueIndex OBJECT-TYPE
+      SYNTAX  Unsigned32 (0..7)
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "An object that identifies the queue index for the
+               dot3ExtPkgQueueSetsTable table.  The queues are reported
+               in the MPCP REPORT message as defined in [802.3ah],
+               clause 64.
+               The number of queues is between 0 and 7, and limited by
+               dot3ExtPkgObjectReportMaximumNumQueues.
+               Value corresponds to the dot3QueueIndex of the queue
+               table."
+      ::= { dot3ExtPkgQueueSetsEntry 1 }
+
+  dot3QueueSetIndex OBJECT-TYPE
+      SYNTAX  Unsigned32 (0..7)
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+              "An object that identifies the queue_set index for the
+               dot3ExtPkgQueueSetsTable table.  The queues are reported
+               in the MPCP REPORT message as defined in [802.3ah],
+               clause 64.
+               The number of queues_sets is between 0 and 7, and
+               limited by dot3ExtPkgObjectReportMaximumNumThreshold."
+      ::= { dot3ExtPkgQueueSetsEntry 2 }
+
+      dot3ExtPkgObjectReportThreshold OBJECT-TYPE
+      SYNTAX  Unsigned32
+      UNITS       "TQ (16nsec)"
+      MAX-ACCESS  read-write
+      STATUS  current
+      DESCRIPTION
+              "An object that defines the value of a threshold report
+               for each queue_set in the REPORT message as defined in
+               [802.3ah], clause 64.  The number of sets for each queue
+               is dot3ExtPkgObjectReportNumThreshold.
+               In the REPORT message, each queue_set reporting will
+               provide information on the occupancy of the queues for
+               frames below the matching Threshold.
+               The value returned shall be in Time quanta (TQ), which
+               is 16nsec or 2 octets increments.
+               Read operation provides the threshold value.  Write
+               operation sets the value of the threshold.
+               The write operation is not restricted in this document
+               and can be done at any time.  Changing
+               dot3ExtPkgObjectReportThreshold can lead to a change in
+               the reporting of the ONU interface and therefore to a
+               change in the bandwidth allocation of the respective
+               interface.  This change may lead a degradation or an
+               interruption of service for the users connected to the
+               respective EPON interface.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface,
+               for each queue and for each queue_set.  At the ONU, it has
+               a distinct value for each queue and for each queue_set."
+      DEFVAL { 0 }
+      ::= { dot3ExtPkgQueueSetsEntry 3 }
+
+  --Optical Interface status tables
+
+  dot3ExtPkgOptIfTable OBJECT-TYPE
+      SYNTAX     SEQUENCE OF Dot3ExtPkgOptIfEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+              "This table defines the control and status indication
+               objects for the optical interface of the EPON interface.
+               Each object has a row for every virtual link denoted by
+               the corresponding ifIndex.
+               The LLID field, as defined in the [802.3ah], is a 2-byte
+               register (15-bit field and a broadcast bit) limiting the
+               number of virtual links to 32768.  Typically the number
+               of expected virtual links in a PON is like the number of
+               ONUs, which is 32-64, plus an additional entry for
+               broadcast LLID (with a value of 0xffff).
+               Although the optical interface is a physical interface,
+               there is a row in the table for each virtual interface.
+               The reason for having a separate row for each virtual
+               link is that the OLT has a separate link for each one of
+               the ONUs.  For instance, ONUs could be in different
+               distances with different link budgets and different
+               receive powers, therefore having different power alarms.
+               It is quite similar to a case of different physical
+               interfaces."
+      ::= { dot3ExtPkgControlObjects 5}
+
+  dot3ExtPkgOptIfEntry OBJECT-TYPE
+      SYNTAX     Dot3ExtPkgOptIfEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+              "An entry in the optical interface table of the EPON
+               interface.
+               Rows exist for an OLT interface and an ONU interface.
+               A row in the table is denoted by the ifIndex of the link
+               and it is created when the ifIndex is created.
+               The rows in the table for an ONU interface are created
+               at system initialization.
+               The row in the table corresponding to the OLT ifIndex
+               and the row corresponding to the broadcast virtual link
+               are created at system initialization.
+               A row in the table corresponding to the ifIndex of a
+               virtual links is created when a virtual link is
+               established (ONU registers) and deleted when the virtual
+               link is deleted (ONU deregisters)."
+      INDEX       { ifIndex }
+      ::= { dot3ExtPkgOptIfTable 1 }
+
+   Dot3ExtPkgOptIfEntry ::=
+     SEQUENCE {
+       dot3ExtPkgOptIfSuspectedFlag             TruthValue,
+       dot3ExtPkgOptIfInputPower                Integer32,
+       dot3ExtPkgOptIfLowInputPower             Integer32,
+       dot3ExtPkgOptIfHighInputPower            Integer32,
+       dot3ExtPkgOptIfLowerInputPowerThreshold  Integer32,
+       dot3ExtPkgOptIfUpperInputPowerThreshold  Integer32,
+       dot3ExtPkgOptIfOutputPower               Integer32,
+       dot3ExtPkgOptIfLowOutputPower            Integer32,
+       dot3ExtPkgOptIfHighOutputPower           Integer32,
+       dot3ExtPkgOptIfLowerOutputPowerThreshold Integer32,
+       dot3ExtPkgOptIfUpperOutputPowerThreshold Integer32,
+       dot3ExtPkgOptIfSignalDetect              TruthValue,
+       dot3ExtPkgOptIfTransmitAlarm             TruthValue,
+       dot3ExtPkgOptIfTransmitEnable            TruthValue
+       }
+
+  dot3ExtPkgOptIfSuspectedFlag OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "This object is a reliability indication.
+       If true, the data in this entry may be unreliable.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 1 }
+
+  dot3ExtPkgOptIfInputPower OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The optical power monitored at the input.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+  ::= { dot3ExtPkgOptIfEntry 2 }
+
+  dot3ExtPkgOptIfLowInputPower OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The lowest optical power monitored at the input during the
+       current 15-minute interval.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 3 }
+
+  dot3ExtPkgOptIfHighInputPower OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The highest optical power monitored at the input during the
+       current 15-minute interval.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 4 }
+
+  dot3ExtPkgOptIfLowerInputPowerThreshold OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+      "The lower limit threshold on input power.  If
+       dot3ExtPkgOptIfInputPower drops to this value or below,
+       a Threshold Crossing Alert (TCA) should be sent.
+       Reading will present the threshold value.  Writing will
+       set the value of the threshold.
+       The write operation is not restricted in this document
+       and can be done at any time.  Changing
+       dot3ExtPkgOptIfLowerInputPowerThreshold can lead to a Threshold
+       Crossing Alert (TCA) being sent for the respective interface.
+       This alert may be leading to an interruption of service for the
+       users connected to the respective EPON interface, depending on
+       the system action on such an alert.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 5 }
+
+  dot3ExtPkgOptIfUpperInputPowerThreshold OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+      "The upper limit threshold on input power.  If
+       dot3ExtPkgOptIfInputPower reaches or exceeds this value,
+       a Threshold Crossing Alert (TCA) should be sent.
+       Reading will present the threshold value.  Writing will
+       set the value of the threshold.
+       The write operation is not restricted in this document
+       and can be done at any time.  Changing
+       dot3ExtPkgOptIfUpperInputPowerThreshold can lead to a Threshold
+
+       Crossing Alert (TCA) being sent for the respective interface.
+       This alert may be leading to an interruption of service for the
+       users connected to the respective EPON interface, depending on
+       the system action on such an alert.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+   ::= { dot3ExtPkgOptIfEntry 6 }
+
+  dot3ExtPkgOptIfOutputPower OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The optical power monitored at the output.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 7 }
+
+  dot3ExtPkgOptIfLowOutputPower OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The lowest optical power monitored at the output during the
+       current 15-minute interval.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 8 }
+
+  dot3ExtPkgOptIfHighOutputPower OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The highest optical power monitored at the output during the
+       current 15-minute interval.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+   ::= { dot3ExtPkgOptIfEntry 9 }
+
+  dot3ExtPkgOptIfLowerOutputPowerThreshold OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+      "The lower limit threshold on output power.  If
+       dot3ExtPkgOptIfOutputPower drops to this value or below,
+       a Threshold Crossing Alert (TCA) should be sent.
+       Reading will present the threshold value.  Writing will
+       set the value of the threshold.
+       The write operation is not restricted in this document
+       and can be done at any time.  Changing
+       dot3ExtPkgOptIfLowerOutputPowerThreshold can lead to a Threshold
+       Crossing Alert (TCA) being sent for the respective interface.
+       This alert may be leading to an interruption of service for the
+       users connected to the respective EPON interface, depending on
+       the system action on such an alert.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+  ::= { dot3ExtPkgOptIfEntry 10 }
+
+  dot3ExtPkgOptIfUpperOutputPowerThreshold OBJECT-TYPE
+    SYNTAX  Integer32
+    UNITS  "0.1 dbm"
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+      "The upper limit threshold on output power.  If
+       dot3ExtPkgOptIfOutputPower reaches or exceeds this value,
+       a Threshold Crossing Alert (TCA) should be sent.
+       Reading will present the threshold value.  Writing will
+       set the value of the threshold.
+       The write operation is not restricted in this document
+       and can be done at any time.  Changing
+       dot3ExtPkgOptIfUpperOutputPowerThreshold can lead to a Threshold
+       Crossing Alert (TCA) being sent for the respective interface.
+       This alert may be leading to an interruption of service of the
+       users connected to the respective EPON interface, depending on
+       the system action on such an alert.
+       This object is applicable for an OLT and an ONU.  At the
+       OLT, it has a distinct value for each virtual interface."
+    ::= { dot3ExtPkgOptIfEntry 11 }
+
+  dot3ExtPkgOptIfSignalDetect OBJECT-TYPE
+      SYNTAX  TruthValue
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+              "When getting true(1), there is a valid optical signal at
+               the receive that is above the optical power level for
+               signal detection.  When getting false(2) the optical
+               signal at the receive is below the optical power level
+
+               for signal detection.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface."
+      DEFVAL { false }
+      ::= { dot3ExtPkgOptIfEntry 12 }
+
+  dot3ExtPkgOptIfTransmitAlarm OBJECT-TYPE
+      SYNTAX  TruthValue
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+              "When getting true(1) there is a non-valid optical signal
+               at the transmit of the interface, either a higher level
+               or lower level than expected.  When getting false(2) the
+               optical signal at the transmit is valid and in the
+               required range.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT, it has a distinct value for each virtual interface."
+      DEFVAL { false }
+      ::= { dot3ExtPkgOptIfEntry 13 }
+
+  dot3ExtPkgOptIfTransmitEnable OBJECT-TYPE
+      SYNTAX  TruthValue
+      MAX-ACCESS  read-write
+      STATUS  current
+      DESCRIPTION
+              "Setting this object to true(1) will cause the optical
+               interface to start transmission (according to the
+               control protocol specified for the logical interface).
+               Setting this object to false(2) will cause the
+               interface to stop the optical transmission.
+               When getting true(1), the optical interface is in
+               transmitting mode (obeying to the logical control
+               protocol).
+               When getting false(2), the optical interface is not in
+               transmitting mode.
+               The write operation is not restricted in this document
+               and can be done at any time.  Changing
+               dot3ExtPkgOptIfTransmitEnable state can lead to a halt
+               in the optical transmission of the respective interface
+               leading to an interruption of service of the users
+               connected to the respective EPON interface.
+               The object is relevant when the admin state of the
+               interface is active as set by the dot3MpcpAdminState.
+               This object is applicable for an OLT and an ONU.  At the
+               OLT it, has a distinct value for each virtual interface."
+      DEFVAL { false }
+      ::= { dot3ExtPkgOptIfEntry 14 }
+
+  -- Conformance Statements
+
+  -- Conformance Groups
+
+  dot3EponGroups      OBJECT IDENTIFIER ::= { dot3EponConformance 1 }
+
+  dot3MpcpGroupBase OBJECT-GROUP
+      OBJECTS {
+              dot3MpcpOperStatus,
+              dot3MpcpAdminState,
+              dot3MpcpMode,
+              dot3MpcpSyncTime,
+              dot3MpcpLinkID,
+              dot3MpcpRemoteMACAddress,
+              dot3MpcpRegistrationState,
+              dot3MpcpMaximumPendingGrants,
+              dot3MpcpTransmitElapsed,
+              dot3MpcpReceiveElapsed,
+              dot3MpcpRoundTripTime
+      }
+      STATUS  current
+      DESCRIPTION
+             "A collection of objects of dot3 Mpcp Control entity state
+              definition.  Objects are per LLID."
+      ::= { dot3EponGroups 1 }
+
+  dot3MpcpGroupStat OBJECT-GROUP
+      OBJECTS {
+              dot3MpcpMACCtrlFramesTransmitted,
+              dot3MpcpMACCtrlFramesReceived,
+              dot3MpcpDiscoveryWindowsSent,
+              dot3MpcpDiscoveryTimeout,
+              dot3MpcpTxRegRequest,
+              dot3MpcpRxRegRequest,
+              dot3MpcpTxRegAck,
+              dot3MpcpRxRegAck,
+              dot3MpcpTxReport,
+              dot3MpcpRxReport,
+              dot3MpcpTxGate,
+              dot3MpcpRxGate,
+              dot3MpcpTxRegister,
+              dot3MpcpRxRegister
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3 Mpcp Statistics.
+               Objects are per LLID."
+      ::= { dot3EponGroups 2 }
+
+  dot3OmpeGroupID OBJECT-GROUP
+      OBJECTS {
+              dot3OmpEmulationType
+
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3 OMP emulation entity
+               state definition.  Objects are per LLID."
+      ::= { dot3EponGroups 3 }
+
+  dot3OmpeGroupStat OBJECT-GROUP
+      OBJECTS {
+              dot3OmpEmulationSLDErrors,
+              dot3OmpEmulationCRC8Errors,
+              dot3OmpEmulationBadLLID,
+              dot3OmpEmulationGoodLLID,
+              dot3OmpEmulationOnuPonCastLLID,
+              dot3OmpEmulationOltPonCastLLID,
+              dot3OmpEmulationBroadcastBitNotOnuLlid,
+              dot3OmpEmulationOnuLLIDNotBroadcast,
+              dot3OmpEmulationBroadcastBitPlusOnuLlid,
+              dot3OmpEmulationNotBroadcastBitNotOnuLlid
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3 OMP emulation
+               Statistics.  Objects are per LLID."
+      ::= { dot3EponGroups 4 }
+
+  dot3EponFecGroupAll OBJECT-GROUP
+      OBJECTS {
+              dot3EponFecPCSCodingViolation,
+              dot3EponFecAbility,
+              dot3EponFecMode,
+              dot3EponFecCorrectedBlocks,
+              dot3EponFecUncorrectableBlocks,
+              dot3EponFecBufferHeadCodingViolation
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3 FEC group control and
+              statistics.  Objects are per LLID."
+      ::= { dot3EponGroups 5 }
+
+  dot3ExtPkgGroupControl OBJECT-GROUP
+      OBJECTS {
+              dot3ExtPkgObjectReset,
+              dot3ExtPkgObjectPowerDown,
+              dot3ExtPkgObjectNumberOfLLIDs,
+              dot3ExtPkgObjectFecEnabled,
+              dot3ExtPkgObjectReportMaximumNumQueues,
+              dot3ExtPkgObjectRegisterAction
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3ExtPkg control
+               definition.  Objects are per LLID."
+      ::= { dot3EponGroups 6 }
+
+  dot3ExtPkgGroupQueue OBJECT-GROUP
+      OBJECTS {
+       dot3ExtPkgObjectReportNumThreshold,
+       dot3ExtPkgObjectReportMaximumNumThreshold,
+       dot3ExtPkgStatTxFramesQueue,
+       dot3ExtPkgStatRxFramesQueue,
+       dot3ExtPkgStatDroppedFramesQueue
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3ExtPkg Queue
+               control.  Objects are per LLID, per queue."
+      ::= { dot3EponGroups 7 }
+
+  dot3ExtPkgGroupQueueSets OBJECT-GROUP
+      OBJECTS {
+       dot3ExtPkgObjectReportThreshold
+      }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of dot3ExtPkg queue_set
+               control.  Objects are per LLID, per queue, per
+               queue_set."
+      ::= { dot3EponGroups 8 }
+
+  dot3ExtPkgGroupOptIf OBJECT-GROUP
+      OBJECTS {
+     dot3ExtPkgOptIfSuspectedFlag,
+       dot3ExtPkgOptIfInputPower,
+       dot3ExtPkgOptIfLowInputPower,
+       dot3ExtPkgOptIfHighInputPower,
+       dot3ExtPkgOptIfLowerInputPowerThreshold,
+       dot3ExtPkgOptIfUpperInputPowerThreshold,
+       dot3ExtPkgOptIfOutputPower,
+       dot3ExtPkgOptIfLowOutputPower,
+       dot3ExtPkgOptIfHighOutputPower,
+       dot3ExtPkgOptIfLowerOutputPowerThreshold,
+       dot3ExtPkgOptIfUpperOutputPowerThreshold,
+       dot3ExtPkgOptIfSignalDetect,
+       dot3ExtPkgOptIfTransmitAlarm,
+       dot3ExtPkgOptIfTransmitEnable
+       }
+      STATUS  current
+      DESCRIPTION
+              "A collection of objects of control and status indication
+               of the optical interface.
+               Objects are per LLID."
+      ::= { dot3EponGroups 9 }
+
+  -- Compliance
+
+     dot3EponCompliances
+         OBJECT IDENTIFIER ::= { dot3EponConformance 2 }
+
+  dot3MPCPCompliance MODULE-COMPLIANCE
+      STATUS      current
+      DESCRIPTION "The compliance statement for Multi-Point
+                   Control Protocol interfaces."
+
+      MODULE  -- this module
+      MANDATORY-GROUPS { dot3MpcpGroupBase}
+
+      GROUP       dot3MpcpGroupStat
+     DESCRIPTION "This group is mandatory for all MPCP supporting
+                  interfaces for statistics collection."
+     ::= { dot3EponCompliances 1}
+
+  dot3OmpeCompliance MODULE-COMPLIANCE
+      STATUS      current
+      DESCRIPTION "The compliance statement for OMPEmulation
+                   interfaces."
+
+      MODULE  -- this module
+      MANDATORY-GROUPS { dot3OmpeGroupID}
+
+      GROUP       dot3OmpeGroupStat
+      DESCRIPTION "This group is mandatory for all OMPemulation
+                   supporting interfaces for statistics collection."
+      ::= { dot3EponCompliances 2}
+
+  dot3EponFecCompliance MODULE-COMPLIANCE
+      STATUS      current
+      DESCRIPTION "The compliance statement for FEC EPON interfaces.
+
+                   This group is mandatory for all FEC supporting
+                   interfaces for control and statistics collection."
+
+      MODULE  -- this module
+      MANDATORY-GROUPS { dot3EponFecGroupAll }
+      ::= { dot3EponCompliances 3}
+
+  dot3ExtPkgCompliance MODULE-COMPLIANCE
+      STATUS      current
+      DESCRIPTION "The compliance statement for EPON Interfaces
+                   using the extended package."
+      MODULE  -- this module
+      MANDATORY-GROUPS { dot3ExtPkgGroupControl }
+
+      GROUP       dot3ExtPkgGroupQueue
+      DESCRIPTION " This group is mandatory for all EPON interfaces
+                   supporting REPORT queue management of the extended
+                   package."
+
+      GROUP       dot3ExtPkgGroupQueueSets
+      DESCRIPTION " This group is mandatory for all EPON interfaces
+                   supporting REPORT queue_sets management of the
+                   extended package."
+
+      GROUP       dot3ExtPkgGroupOptIf
+      DESCRIPTION "This group is mandatory for all EPON interfaces
+                   supporting optical interfaces management,
+                   of the extended package."
+      ::= { dot3EponCompliances 4}
+
+  END
diff --git a/snmp_builder/mibs/DOT3-OAM-MIB.mib b/snmp_builder/mibs/DOT3-OAM-MIB.mib
new file mode 100644
index 0000000..dac8a44
--- /dev/null
+++ b/snmp_builder/mibs/DOT3-OAM-MIB.mib
@@ -0,0 +1,2115 @@
+DOT3-OAM-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+   MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32, Unsigned32,
+     Integer32, NOTIFICATION-TYPE
+     FROM SNMPv2-SMI
+     -- from [RFC2578]
+   TEXTUAL-CONVENTION, MacAddress, TimeStamp, TruthValue
+
+     FROM SNMPv2-TC
+     -- from [RFC2579]
+   CounterBasedGauge64
+     FROM HCNUM-TC
+     -- from [RFC2856]
+   ifIndex
+     FROM IF-MIB
+     -- from [RFC2863]
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+     FROM SNMPv2-CONF;
+
+     -- from [RFC2580]
+
+   dot3OamMIB MODULE-IDENTITY
+     LAST-UPDATED "200706140000Z"  -- June 14,2007"
+     ORGANIZATION
+       "IETF Ethernet Interfaces and Hub MIB Working Group"
+     CONTACT-INFO
+       "WG Charter:
+         http://www.ietf.org/html.charters/hubmib-charter.html
+       Mailing lists:
+         General Discussion: hubmib@ietf.org
+         To Subscribe: hubmib-requests@ietf.org
+         In Body: subscribe your_email_address
+       Chair: Bert Wijnen
+         Alcatel-Lucent
+         Email: bwijnen at alcatel-lucent dot com
+       Editor: Matt Squire
+         Hatteras Networks
+         E-mail: msquire at hatterasnetworks dot com
+       "
+     DESCRIPTION
+       "The MIB module for managing the new Ethernet OAM features
+       introduced by the Ethernet in the First Mile taskforce (IEEE
+       802.3ah).  The functionality presented here is based on IEEE
+       802.3ah [802.3ah], released in October, 2004.  [802.3ah] was
+       prepared as an addendum to the standing version of IEEE 802.3
+       [802.3-2002].  Since then, [802.3ah] has been
+       merged into the base IEEE 802.3 specification in [802.3-2005].
+
+       In particular, this MIB focuses on the new OAM functions
+       introduced in Clause 57 of [802.3ah].  The OAM functionality
+       of Clause 57 is controlled by new management attributes
+       introduced in Clause 30 of [802.3ah].  The OAM functions are
+       not specific to any particular Ethernet physical layer, and
+       can be generically applied to any Ethernet interface of
+       [802.3-2002].
+
+       An Ethernet OAM protocol data unit is a valid Ethernet frame
+       with a destination MAC address equal to the reserved MAC
+       address for Slow Protocols (See 43B of [802.3ah]), a
+       lengthOrType field equal to the reserved type for Slow
+       Protocols, and a Slow Protocols subtype equal to that of the
+       subtype reserved for Ethernet OAM.  OAMPDU is used throughout
+       this document as an abbreviation for Ethernet OAM protocol
+       data unit.
+
+       The following reference is used throughout this MIB module:
+
+         [802.3ah] refers to:
+           IEEE Std 802.3ah-2004: 'Draft amendment to -
+           Information technology - Telecommunications and
+           information exchange between systems - Local and
+           metropolitan area networks - Specific requirements - Part
+           3: Carrier sense multiple access with collision detection
+           (CSMA/CD) access method and physical layer specifications
+           - Media Access Control Parameters, Physical Layers and
+           Management Parameters for subscriber access networks',
+           October 2004.
+
+         [802.3-2002] refers to:
+           IEEE Std 802.3-2002:
+           'Information technology - Telecommunications and
+           information exchange between systems - Local and
+           metropolitan area networks - Specific requirements - Part
+           3: Carrier sense multiple access with collision detection
+           (CSMA/CD) access method and physical layer specifications
+           - Media Access Control Parameters, Physical Layers and
+           Management Parameters for subscriber access networks',
+           March 2002.
+
+         [802.3-2005] refers to:
+           IEEE Std 802.3-2005:
+           'Information technology - Telecommunications and
+           information exchange between systems - Local and
+           metropolitan area networks - Specific requirements - Part
+           3: Carrier sense multiple access with collision detection
+           (CSMA/CD) access method and physical layer specifications
+           - Media Access Control Parameters, Physical Layers and
+           Management Parameters for subscriber access networks',
+           December 2005.
+
+         [802-2001] refers to:
+           'IEEE Standard for LAN/MAN (Local Area
+           Network/Metropolitan Area Network): Overview and
+           Architecture', IEEE 802, June 2001.
+
+       Copyright (c) The IETF Trust (2007).  This version of
+       this MIB module is part of RFC 4878; See the RFC itself for
+       full legal notices. "
+
+     REVISION    "200706140000Z"  -- June 14, 2007"
+     DESCRIPTION "Initial version, published as RFC 4878."
+      ::= { mib-2 158 }
+
+   --
+   -- Sections of the Ethernet OAM MIB
+
+   --
+      dot3OamNotifications OBJECT IDENTIFIER ::= { dot3OamMIB 0 }
+      dot3OamObjects       OBJECT IDENTIFIER ::= { dot3OamMIB 1 }
+      dot3OamConformance   OBJECT IDENTIFIER ::= { dot3OamMIB 2 }
+
+   --
+   -- Textual conventions for the OAM MIB
+   --
+   EightOTwoOui ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "24-bit Organizationally Unique Identifier.  Information on
+       OUIs can be found in IEEE 802-2001 [802-2001], Clause 9."
+     SYNTAX       OCTET STRING(SIZE(3))
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Control group
+   --
+
+   dot3OamTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF Dot3OamEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table contains the primary controls and status for the
+       OAM capabilities of an Ethernet-like interface.  There will be
+       one row in this table for each Ethernet-like interface in the
+       system that supports the OAM functions defined in [802.3ah].
+       "
+     ::= { dot3OamObjects 1 }
+
+   dot3OamEntry OBJECT-TYPE
+     SYNTAX     Dot3OamEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "An entry in the table that contains information on the
+       Ethernet OAM function for a single Ethernet like interface.
+       Entries in the table are created automatically for each
+       interface supporting Ethernet OAM.  The status of the row
+       entry can be determined from dot3OamOperStatus.
+
+       A dot3OamEntry is indexed in the dot3OamTable by the ifIndex
+       object of the Interfaces MIB.
+       "
+     INDEX       { ifIndex }
+     ::= { dot3OamTable 1 }
+
+   Dot3OamEntry ::=
+     SEQUENCE {
+       dot3OamAdminState                  INTEGER,
+       dot3OamOperStatus                  INTEGER,
+       dot3OamMode                        INTEGER,
+       dot3OamMaxOamPduSize               Unsigned32,
+       dot3OamConfigRevision              Unsigned32,
+       dot3OamFunctionsSupported          BITS
+     }
+
+   dot3OamAdminState OBJECT-TYPE
+     SYNTAX      INTEGER {
+                   enabled(1),
+                   disabled(2)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "This object is used to provision the default administrative
+       OAM mode for this interface.  This object represents the
+       desired state of OAM for this interface.
+
+       The dot3OamAdminState always starts in the disabled(2) state
+       until an explicit management action or configuration
+       information retained by the system causes a transition to the
+       enabled(1) state.  When enabled(1), Ethernet OAM will attempt
+       to operate over this interface.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.2"
+     ::= { dot3OamEntry 1 }
+
+   dot3OamOperStatus OBJECT-TYPE
+     SYNTAX      INTEGER {
+                   disabled(1),
+                   linkFault(2),
+                   passiveWait(3),
+                   activeSendLocal(4),
+                   sendLocalAndRemote(5),
+                   sendLocalAndRemoteOk(6),
+                   oamPeeringLocallyRejected(7),
+                   oamPeeringRemotelyRejected(8),
+                   operational(9),
+                   nonOperHalfDuplex(10)
+                 }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "At initialization and failure conditions, two OAM entities on
+
+       the same full-duplex Ethernet link begin a discovery phase to
+       determine what OAM capabilities may be used on that link.  The
+       progress of this initialization is controlled by the OA
+       sublayer.
+
+       This value is always disabled(1) if OAM is disabled on this
+       interface via the dot3OamAdminState.
+
+       If the link has detected a fault and is transmitting OAMPDUs
+       with a link fault indication, the value is linkFault(2).
+       Also, if the interface is not operational (ifOperStatus is
+       not up(1)), linkFault(2) is returned.  Note that the object
+       ifOperStatus may not be up(1) as a result of link failure or
+       administrative action (ifAdminState being down(2) or
+       testing(3)).
+
+       The passiveWait(3) state is returned only by OAM entities in
+       passive mode (dot3OamMode) and reflects the state in which the
+       OAM entity is waiting to see if the peer device is OA
+       capable.  The activeSendLocal(4) value is used by active mode
+       devices (dot3OamMode) and reflects the OAM entity actively
+       trying to discover whether the peer has OAM capability but has
+       not yet made that determination.
+
+       The state sendLocalAndRemote(5) reflects that the local OA
+       entity has discovered the peer but has not yet accepted or
+       rejected the configuration of the peer.  The local device can,
+       for whatever reason, decide that the peer device is
+       unacceptable and decline OAM peering.  If the local OAM entity
+       rejects the peer OAM entity, the state becomes
+       oamPeeringLocallyRejected(7).  If the OAM peering is allowed
+       by the local device, the state moves to
+       sendLocalAndRemoteOk(6).  Note that both the
+       sendLocalAndRemote(5) and oamPeeringLocallyRejected(7) states
+       fall within the state SEND_LOCAL_REMOTE of the Discovery state
+       diagram [802.3ah, Figure 57-5], with the difference being
+       whether the local OAM client has actively rejected the peering
+       or has just not indicated any decision yet.  Whether a peering
+       decision has been made is indicated via the local flags field
+       in the OAMPDU (reflected in the aOAMLocalFlagsField of
+       30.3.6.1.10).
+
+       If the remote OAM entity rejects the peering, the state
+       becomes oamPeeringRemotelyRejected(8).  Note that both the
+       sendLocalAndRemoteOk(6) and oamPeeringRemotelyRejected(8)
+       states fall within the state SEND_LOCAL_REMOTE_OK of the
+       Discovery state diagram [802.3ah, Figure 57-5], with the
+       difference being whether the remote OAM client has rejected
+
+       the peering or has just not yet decided.  This is indicated
+       via the remote flags field in the OAMPDU (reflected in the
+       aOAMRemoteFlagsField of 30.3.6.1.11).
+
+       When the local OAM entity learns that both it and the remote
+       OAM entity have accepted the peering, the state moves to
+       operational(9) corresponding to the SEND_ANY state of the
+       Discovery state diagram [802.3ah, Figure 57-5].
+
+       Since Ethernet OAM functions are not designed to work
+       completely over half-duplex interfaces, the value
+       nonOperHalfDuplex(10) is returned whenever Ethernet OAM is
+       enabled (dot3OamAdminState is enabled(1)), but the interface
+       is in half-duplex operation.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.4, 30.3.6.1.10, 30.3.6.1.11"
+     ::= { dot3OamEntry 2 }
+
+   dot3OamMode OBJECT-TYPE
+     SYNTAX      INTEGER {
+                   passive(1),
+                   active(2)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "This object configures the mode of OAM operation for this
+       Ethernet-like interface.  OAM on Ethernet interfaces may be in
+       'active' mode or 'passive' mode.  These two modes differ in
+       that active mode provides additional capabilities to initiate
+       monitoring activities with the remote OAM peer entity, while
+       passive mode generally waits for the peer to initiate OA
+       actions with it.  As an example, an active OAM entity can put
+       the remote OAM entity in a loopback state, where a passive OA
+       entity cannot.
+
+       The default value of dot3OamMode is dependent on the type of
+       system on which this Ethernet-like interface resides.  The
+       default value should be 'active(2)' unless it is known that
+       this system should take on a subservient role to the other
+       device connected over this interface.
+
+       Changing this value results in incrementing the configuration
+       revision field of locally generated OAMPDUs (30.3.6.1.12) and
+       potentially re-doing the OAM discovery process if the
+       dot3OamOperStatus was already operational(9).
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.3"
+     ::= { dot3OamEntry 3 }
+
+   dot3OamMaxOamPduSize OBJECT-TYPE
+     SYNTAX      Unsigned32 (64..1518)
+     UNITS       "octets"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The largest OAMPDU that the OAM entity supports.  OA
+       entities exchange maximum OAMPDU sizes and negotiate to use
+       the smaller of the two maximum OAMPDU sizes between the peers.
+       This value is determined by the local implementation.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.8"
+     ::= { dot3OamEntry 4 }
+
+   dot3OamConfigRevision OBJECT-TYPE
+     SYNTAX      Unsigned32(0..65535)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The configuration revision of the OAM entity as reflected in
+       the latest OAMPDU sent by the OAM entity.  The config revision
+       is used by OAM entities to indicate that configuration changes
+       have occurred, which might require the peer OAM entity to
+       re-evaluate whether OAM peering is allowed.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.12"
+     ::= { dot3OamEntry 5 }
+
+   dot3OamFunctionsSupported OBJECT-TYPE
+     SYNTAX      BITS {
+                   unidirectionalSupport (0),
+                   loopbackSupport(1),
+                   eventSupport(2),
+                   variableSupport(3)
+                 }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The OAM functions supported on this Ethernet-like interface.
+       OAM consists of separate functional sets beyond the basic
+       discovery process that is always required.  These functional
+       groups can be supported independently by any implementation.
+       These values are communicated to the peer via the local
+       configuration field of Information OAMPDUs.
+
+       Setting 'unidirectionalSupport(0)' indicates that the OA
+
+       entity supports the transmission of OAMPDUs on links that are
+       operating in unidirectional mode (traffic flowing in one
+       direction only).  Setting 'loopbackSupport(1)' indicates that
+       the OAM entity can initiate and respond to loopback commands.
+       Setting 'eventSupport(2)' indicates that the OAM entity can
+       send and receive Event Notification OAMPDUs.  Setting
+       'variableSupport(3)' indicates that the OAM entity can send
+       and receive Variable Request and Response OAMPDUs.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.6"
+     ::= { dot3OamEntry 6 }
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Peer group
+   --
+
+   dot3OamPeerTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF Dot3OamPeerEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table contains information about the OAM peer for a
+       particular Ethernet-like interface.  OAM entities communicate
+       with a single OAM peer entity on Ethernet links on which OA
+       is enabled and operating properly.  There is one entry in this
+       table for each entry in the dot3OamTable for which information
+       on the peer OAM entity is available.
+       "
+     ::= { dot3OamObjects 2 }
+
+   dot3OamPeerEntry OBJECT-TYPE
+     SYNTAX      Dot3OamPeerEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the table containing information on the peer OA
+       entity for a single Ethernet-like interface.
+
+       Note that there is at most one OAM peer for each Ethernet-like
+       interface.  Entries are automatically created when information
+       about the OAM peer entity becomes available, and automatically
+       deleted when the OAM peer entity is no longer in
+       communication.  Peer information is not available when
+       dot3OamOperStatus is disabled(1), linkFault(2),
+       passiveWait(3), activeSendLocal(4), or nonOperHalfDuplex(10).
+       "
+     INDEX       { ifIndex }
+     ::= { dot3OamPeerTable 1 }
+
+   Dot3OamPeerEntry ::=
+     SEQUENCE {
+       dot3OamPeerMacAddress               MacAddress,
+       dot3OamPeerVendorOui                EightOTwoOui,
+       dot3OamPeerVendorInfo               Unsigned32,
+       dot3OamPeerMode                     INTEGER,
+       dot3OamPeerMaxOamPduSize            Unsigned32,
+       dot3OamPeerConfigRevision           Unsigned32,
+       dot3OamPeerFunctionsSupported       BITS
+     }
+
+   dot3OamPeerMacAddress OBJECT-TYPE
+     SYNTAX      MacAddress
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The MAC address of the peer OAM entity.  The MAC address is
+       derived from the most recently received OAMPDU.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.5."
+     ::= { dot3OamPeerEntry 1 }
+
+   dot3OamPeerVendorOui OBJECT-TYPE
+     SYNTAX      EightOTwoOui
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The OUI of the OAM peer as reflected in the latest
+       Information OAMPDU received with a Local Information TLV.  The
+       OUI can be used to identify the vendor of the remote OA
+       entity.  This value is initialized to three octets of zero
+       before any Local Information TLV is received.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.16."
+     ::= { dot3OamPeerEntry 2 }
+
+   dot3OamPeerVendorInfo OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The Vendor Info of the OAM peer as reflected in the latest
+       Information OAMPDU received with a Local Information TLV.
+       The semantics of the Vendor Information field is proprietary
+       and specific to the vendor (identified by the
+       dot3OamPeerVendorOui).  This information could, for example,
+       be used to identify a specific product or product family.
+       This value is initialized to zero before any Local
+       Information TLV is received.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.17."
+     ::= { dot3OamPeerEntry 3 }
+
+   dot3OamPeerMode OBJECT-TYPE
+     SYNTAX      INTEGER {
+                   passive(1),
+                   active(2),
+                   unknown(3)
+                 }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The mode of the OAM peer as reflected in the latest
+       Information OAMPDU received with a Local Information TLV.  The
+       mode of the peer can be determined from the Configuration
+       field in the Local Information TLV of the last Information
+       OAMPDU received from the peer.  The value is unknown(3)
+       whenever no Local Information TLV has been received.  The
+       values of active(2) and passive(1) are returned when a Local
+       Information TLV has been received indicating that the peer is
+       in active or passive mode, respectively.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.7."
+     ::= { dot3OamPeerEntry 4 }
+
+   dot3OamPeerMaxOamPduSize OBJECT-TYPE
+     SYNTAX      Unsigned32 (0 | 64..1518)
+     UNITS       "octets"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The maximum size of OAMPDU supported by the peer as reflected
+       in the latest Information OAMPDU received with a Local
+       Information TLV.  Ethernet OAM on this interface must not use
+       OAMPDUs that exceed this size.  The maximum OAMPDU size can be
+       determined from the PDU Configuration field of the Local
+       Information TLV of the last Information OAMPDU received from
+       the peer.  A value of zero is returned if no Local Information
+       TLV has been received.  Otherwise, the value of the OAM peer's
+       maximum OAMPDU size is returned in this value.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.9."
+     ::= { dot3OamPeerEntry 5 }
+
+   dot3OamPeerConfigRevision OBJECT-TYPE
+     SYNTAX      Unsigned32(0..65535)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The configuration revision of the OAM peer as reflected in
+       the latest OAMPDU.  This attribute is changed by the peer
+       whenever it has a local configuration change for Ethernet OA
+       on this interface.  The configuration revision can be
+       determined from the Revision field of the Local Information
+       TLV of the most recently received Information OAMPDU with
+       a Local Information TLV.  A value of zero is returned if
+       no Local Information TLV has been received.
+     "
+     REFERENCE   "[802.3ah], 30.3.6.1.13."
+     ::= { dot3OamPeerEntry 6 }
+
+   dot3OamPeerFunctionsSupported OBJECT-TYPE
+     SYNTAX      BITS {
+                   unidirectionalSupport (0),
+                   loopbackSupport(1),
+                   eventSupport(2),
+                   variableSupport(3)
+                 }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The OAM functions supported on this Ethernet-like interface.
+       OAM consists of separate functionality sets above the basic
+       discovery process.  This value indicates the capabilities of
+       the peer OAM entity with respect to these functions.  This
+       value is initialized so all bits are clear.
+
+       If unidirectionalSupport(0) is set, then the peer OAM entity
+       supports sending OAM frames on Ethernet interfaces when the
+       receive path is known to be inoperable.  If
+       loopbackSupport(1) is set, then the peer OAM entity can send
+       and receive OAM loopback commands.  If eventSupport(2) is set,
+       then the peer OAM entity can send and receive event OAMPDUs to
+       signal various error conditions.  If variableSupport(3) is
+       set, then the peer OAM entity can send and receive variable
+       requests to monitor the attribute value as described in Clause
+       57 of [802.3ah].
+
+       The capabilities of the OAM peer can be determined from the
+       configuration field of the Local Information TLV of the most
+       recently received Information OAMPDU with a Local Information
+       TLV.  All zeros are returned if no Local Information TLV has
+
+       yet been received.
+       "
+     REFERENCE   "[802.3ah], REFERENCE 30.3.6.1.7."
+     ::= { dot3OamPeerEntry 7 }
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Loopback group
+   --
+
+   dot3OamLoopbackTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF Dot3OamLoopbackEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table contains controls for the loopback state of the
+       local link as well as indicates the status of the loopback
+       function.  There is one entry in this table for each entry in
+       dot3OamTable that supports loopback functionality (where
+       dot3OamFunctionsSupported includes the loopbackSupport bit
+       set).
+
+       Loopback can be used to place the remote OAM entity in a state
+       where every received frame (except OAMPDUs) is echoed back
+       over the same interface on which they were received.  In this
+       state, at the remote entity, 'normal' traffic is disabled as
+       only the looped back frames are transmitted on the interface.
+       Loopback is thus an intrusive operation that prohibits normal
+       data flow and should be used accordingly.
+       "
+     ::= { dot3OamObjects 3 }
+
+   dot3OamLoopbackEntry OBJECT-TYPE
+     SYNTAX      Dot3OamLoopbackEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the table, containing information on the loopback
+       status for a single Ethernet-like interface.  Entries in the
+       table are automatically created whenever the local OAM entity
+       supports loopback capabilities.  The loopback status on the
+       interface can be determined from the dot3OamLoopbackStatus
+       object.
+       "
+     INDEX       { ifIndex }
+     ::= { dot3OamLoopbackTable 1 }
+
+   Dot3OamLoopbackEntry ::=
+
+     SEQUENCE {
+       dot3OamLoopbackStatus             INTEGER,
+       dot3OamLoopbackIgnoreRx           INTEGER
+     }
+
+   dot3OamLoopbackStatus OBJECT-TYPE
+     SYNTAX      INTEGER {
+                   -- all values, except where noted, can be read
+                   -- but cannot be written
+                   noLoopback (1),
+                   -- initiatingLoopback can be read or written
+                   initiatingLoopback (2),
+                   remoteLoopback (3),
+                   -- terminatingLoopback can be read or written
+                   terminatingLoopback (4),
+                   localLoopback (5),
+                   unknown (6)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The loopback status of the OAM entity.  This status is
+       determined by a combination of the local parser and
+       multiplexer states, the remote parser and multiplexer states,
+       as well as by the actions of the local OAM client.  When
+       operating in normal mode with no loopback in progress, the
+       status reads noLoopback(1).
+
+       The values initiatingLoopback(2) and terminatingLoopback(4)
+       can be read or written.  The other values can only be read -
+       they can never be written.  Writing initiatingLoopback causes
+       the local OAM entity to start the loopback process with its
+       peer.  This value can only be written when the status is
+       noLoopback(1).  Writing the value initiatingLoopback(2) in any
+       other state has no effect.  When in remoteLoopback(3), writing
+       terminatingLoopback(4) causes the local OAM entity to initiate
+       the termination of the loopback state.  Writing
+       terminatingLoopack(4) in any other state has no effect.
+
+       If the OAM client initiates a loopback and has sent a
+       Loopback OAMPDU and is waiting for a response, where the local
+       parser and multiplexer states are DISCARD (see [802.3ah,
+       57.2.11.1]), the status is 'initiatingLoopback'.  In this
+       case, the local OAM entity has yet to receive any
+       acknowledgment that the remote OAM entity has received its
+       loopback command request.
+
+       If the local OAM client knows that the remote OAM entity is in
+       loopback mode (via the remote state information as described
+       in [802.3ah, 57.2.11.1, 30.3.6.1.15]), the status is
+       remoteLoopback(3).  If the local OAM client is in the process
+       of terminating the remote loopback [802.3ah, 57.2.11.3,
+       30.3.6.1.14] with its local multiplexer and parser states in
+       DISCARD, the status is terminatingLoopback(4).  If the remote
+       OAM client has put the local OAM entity in loopback mode as
+       indicated by its local parser state, the status is
+       localLoopback(5).
+
+       The unknown(6) status indicates that the parser and
+       multiplexer combination is unexpected.  This status may be
+       returned if the OAM loopback is in a transition state but
+       should not persist.
+
+       The values of this attribute correspond to the following
+       values of the local and remote parser and multiplexer states.
+
+         value            LclPrsr   LclMux    RmtPrsr   RmtMux
+         noLoopback         FWD       FWD       FWD       FWD
+         initLoopback     DISCARD   DISCARD     FWD       FWD
+         rmtLoopback      DISCARD     FWD      LPBK    DISCARD
+         tmtngLoopback    DISCARD   DISCARD    LPBK    DISCARD
+         lclLoopback        LPBK    DISCARD   DISCARD     FWD
+         unknown            ***   any other combination   ***
+       "
+     REFERENCE   "[802.3ah], REFERENCE 57.2.11, 30.3.61.14,
+       30.3.6.1.15"
+     ::= { dot3OamLoopbackEntry 1 }
+
+   dot3OamLoopbackIgnoreRx OBJECT-TYPE
+     SYNTAX      INTEGER { ignore(1), process(2) }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Since OAM loopback is a disruptive operation (user traffic
+       does not pass), this attribute provides a mechanism to provide
+       controls over whether received OAM loopback commands are
+       processed or ignored.  When the value is ignore(1), received
+       loopback commands are ignored.  When the value is process(2),
+       OAM loopback commands are processed.  The default value is to
+       ignore loopback commands (ignore(1)).
+       "
+     REFERENCE   "[802.3ah], REFERENCE 57.2.11, 30.3.61.14,
+       30.3.6.1.15"
+     ::= { dot3OamLoopbackEntry 2 }
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Statistics group
+   --
+
+   dot3OamStatsTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF Dot3OamStatsEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table contains statistics for the OAM function on a
+       particular Ethernet-like interface.  There is an entry in the
+       table for every entry in the dot3OamTable.
+
+       The counters in this table are defined as 32-bit entries to
+       match the counter size as defined in [802.3ah].  Given that
+       the OA protocol is a slow protocol, the counters increment at
+       a slow rate.
+       "
+     ::= { dot3OamObjects 4 }
+
+   dot3OamStatsEntry OBJECT-TYPE
+     SYNTAX      Dot3OamStatsEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the table containing statistics information on
+       the Ethernet OAM function for a single Ethernet-like
+       interface.  Entries are automatically created for every entry
+       in the dot3OamTable.  Counters are maintained across
+       transitions in dot3OamOperStatus.
+       "
+     INDEX       { ifIndex }
+     ::= { dot3OamStatsTable 1 }
+
+   Dot3OamStatsEntry ::=
+     SEQUENCE {
+               dot3OamInformationTx                Counter32,
+               dot3OamInformationRx                Counter32,
+               dot3OamUniqueEventNotificationTx    Counter32,
+               dot3OamUniqueEventNotificationRx    Counter32,
+               dot3OamDuplicateEventNotificationTx Counter32,
+               dot3OamDuplicateEventNotificationRx Counter32,
+               dot3OamLoopbackControlTx            Counter32,
+               dot3OamLoopbackControlRx            Counter32,
+               dot3OamVariableRequestTx            Counter32,
+               dot3OamVariableRequestRx            Counter32,
+               dot3OamVariableResponseTx           Counter32,
+               dot3OamVariableResponseRx           Counter32,
+               dot3OamOrgSpecificTx                Counter32,
+               dot3OamOrgSpecificRx                Counter32,
+               dot3OamUnsupportedCodesTx           Counter32,
+               dot3OamUnsupportedCodesRx           Counter32,
+               dot3OamFramesLostDueToOam           Counter32
+              }
+
+   dot3OamInformationTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Information OAMPDUs transmitted on
+       this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.  "
+     REFERENCE   "[802.3ah], 30.3.6.1.20."
+     ::= { dot3OamStatsEntry 1 }
+
+   dot3OamInformationRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Information OAMPDUs received on this
+       interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.21."
+     ::= { dot3OamStatsEntry 2 }
+
+   dot3OamUniqueEventNotificationTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of unique Event OAMPDUs transmitted on
+       this interface.  Event Notifications may be sent in duplicate
+       to increase the probability of successfully being received,
+       given the possibility that a frame may be lost in transit.
+       Duplicate Event Notification transmissions are counted by
+       dot3OamDuplicateEventNotificationTx.
+
+       A unique Event Notification OAMPDU is indicated as an Event
+       Notification OAMPDU with a Sequence Number field that is
+       distinct from the previously transmitted Event Notification
+       OAMPDU Sequence Number.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.22."
+     ::= { dot3OamStatsEntry 3 }
+
+   dot3OamUniqueEventNotificationRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of unique Event OAMPDUs received on
+       this interface.  Event Notification OAMPDUs may be sent in
+       duplicate to increase the probability of successfully being
+       received, given the possibility that a frame may be lost in
+       transit.  Duplicate Event Notification receptions are counted
+       by dot3OamDuplicateEventNotificationRx.
+
+       A unique Event Notification OAMPDU is indicated as an Event
+       Notification OAMPDU with a Sequence Number field that is
+       distinct from the previously received Event Notification
+       OAMPDU Sequence Number.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.24."
+     ::= { dot3OamStatsEntry 4 }
+
+   dot3OamDuplicateEventNotificationTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of duplicate Event OAMPDUs transmitted
+
+       on this interface.  Event Notification OAMPDUs may be sent in
+       duplicate to increase the probability of successfully being
+       received, given the possibility that a frame may be lost in
+       transit.
+
+       A duplicate Event Notification OAMPDU is indicated as an Event
+       Notification OAMPDU with a Sequence Number field that is
+       identical to the previously transmitted Event Notification
+       OAMPDU Sequence Number.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.23."
+     ::= { dot3OamStatsEntry 5 }
+
+   dot3OamDuplicateEventNotificationRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of duplicate Event OAMPDUs received on
+       this interface.  Event Notification OAMPDUs may be sent in
+       duplicate to increase the probability of successfully being
+       received, given the possibility that a frame may be lost in
+       transit.
+
+       A duplicate Event Notification OAMPDU is indicated as an Event
+       Notification OAMPDU with a Sequence Number field that is
+       identical to the previously received Event Notification OAMPDU
+       Sequence Number.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.25."
+     ::= { dot3OamStatsEntry 6 }
+
+   dot3OamLoopbackControlTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Loopback Control OAMPDUs transmitted
+
+       on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.26."
+     ::= { dot3OamStatsEntry 7 }
+
+   dot3OamLoopbackControlRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Loopback Control OAMPDUs received
+       on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.27."
+     ::= { dot3OamStatsEntry 8 }
+
+   dot3OamVariableRequestTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Variable Request OAMPDUs transmitted
+       on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.28."
+     ::= { dot3OamStatsEntry 9 }
+
+   dot3OamVariableRequestRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Variable Request OAMPDUs received on
+
+       this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.29."
+     ::= { dot3OamStatsEntry 10 }
+
+   dot3OamVariableResponseTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Variable Response OAMPDUs
+       transmitted on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.30."
+     ::= { dot3OamStatsEntry 11 }
+
+   dot3OamVariableResponseRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Variable Response OAMPDUs received
+       on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.31."
+     ::= { dot3OamStatsEntry 12 }
+
+    dot3OamOrgSpecificTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Organization Specific OAMPDUs
+
+       transmitted on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.32."
+     ::= { dot3OamStatsEntry 13 }
+
+   dot3OamOrgSpecificRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of Organization Specific OAMPDUs
+       received on this interface.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.33."
+     ::= { dot3OamStatsEntry 14 }
+
+   dot3OamUnsupportedCodesTx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of OAMPDUs transmitted on this
+       interface with an unsupported op-code.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.18."
+     ::= { dot3OamStatsEntry 15 }
+
+   dot3OamUnsupportedCodesRx OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of OAMPDUs received on this interface
+
+       with an unsupported op-code.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.19."
+     ::= { dot3OamStatsEntry 16 }
+
+   dot3OamFramesLostDueToOam OBJECT-TYPE
+     SYNTAX      Counter32
+     UNITS       "frames"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "A count of the number of frames that were dropped by the OA
+       multiplexer.  Since the OAM multiplexer has multiple inputs
+       and a single output, there may be cases where frames are
+       dropped due to transmit resource contention.  This counter is
+       incremented whenever a frame is dropped by the OAM layer.
+       Note that any Ethernet frame, not just OAMPDUs, may be dropped
+       by the OAM layer.  This can occur when an OAMPDU takes
+       precedence over a 'normal' frame resulting in the 'normal'
+       frame being dropped.
+
+       When this counter is incremented, no other counters in this
+       MIB are incremented.
+
+       Discontinuities of this counter can occur at re-initialization
+       of the management system, and at other times as indicated by
+       the value of the ifCounterDiscontinuityTime.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.46."
+     ::= { dot3OamStatsEntry 17 }
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Event Configuration group
+   --
+
+   dot3OamEventConfigTable OBJECT-TYPE
+     SYNTAX     SEQUENCE OF Dot3OamEventConfigEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "Ethernet OAM includes the ability to generate and receive
+       Event Notification OAMPDUs to indicate various link problems.
+       This table contains the mechanisms to enable Event
+
+       Notifications and configure the thresholds to generate the
+       standard Ethernet OAM events.  There is one entry in the table
+       for every entry in dot3OamTable that supports OAM events
+       (where dot3OamFunctionsSupported includes the eventSupport
+       bit set).  The values in the table are maintained across
+       changes to dot3OamOperStatus.
+
+       The standard threshold crossing events are:
+         - Errored Symbol Period Event.  Generated when the number of
+           symbol errors exceeds a threshold within a given window
+           defined by a number of symbols (for example, 1,000 symbols
+           out of 1,000,000 had errors).
+         - Errored Frame Period Event.  Generated when the number of
+           frame errors exceeds a threshold within a given window
+           defined by a number of frames (for example, 10 frames out
+           of 1000 had errors).
+         - Errored Frame Event.  Generated when the number of frame
+           errors exceeds a threshold within a given window defined
+           by a period of time (for example, 10 frames in 1 second
+           had errors).
+         - Errored Frame Seconds Summary Event.  Generated when the
+           number of errored frame seconds exceeds a threshold within
+           a given time period (for example, 10 errored frame seconds
+           within the last 100 seconds).  An errored frame second is
+           defined as a 1 second interval which had >0 frame errors.
+       There are other events (dying gasp, critical events) that are
+       not threshold crossing events but which can be
+       enabled/disabled via this table.
+       "
+     ::= { dot3OamObjects 5 }
+
+   dot3OamEventConfigEntry OBJECT-TYPE
+     SYNTAX      Dot3OamEventConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Entries are automatically created and deleted from this
+       table, and exist whenever the OAM entity supports Ethernet OA
+       events (as indicated by the eventSupport bit in
+       dot3OamFunctionsSuppported).  Values in the table are
+       maintained across changes to the value of dot3OamOperStatus.
+
+       Event configuration controls when the local management entity
+       sends Event Notification OAMPDUs to its OAM peer, and when
+       certain event flags are set or cleared in OAMPDUs.
+       "
+     INDEX       { ifIndex }
+     ::= { dot3OamEventConfigTable 1 }
+
+   Dot3OamEventConfigEntry ::=
+     SEQUENCE {
+               dot3OamErrSymPeriodWindowHi        Unsigned32,
+               dot3OamErrSymPeriodWindowLo        Unsigned32,
+               dot3OamErrSymPeriodThresholdHi     Unsigned32,
+               dot3OamErrSymPeriodThresholdLo     Unsigned32,
+               dot3OamErrSymPeriodEvNotifEnable   TruthValue,
+               dot3OamErrFramePeriodWindow        Unsigned32,
+               dot3OamErrFramePeriodThreshold     Unsigned32,
+               dot3OamErrFramePeriodEvNotifEnable TruthValue,
+               dot3OamErrFrameWindow              Unsigned32,
+               dot3OamErrFrameThreshold           Unsigned32,
+               dot3OamErrFrameEvNotifEnable       TruthValue,
+               dot3OamErrFrameSecsSummaryWindow   Integer32,
+               dot3OamErrFrameSecsSummaryThreshold Integer32,
+               dot3OamErrFrameSecsEvNotifEnable   TruthValue,
+               dot3OamDyingGaspEnable             TruthValue,
+               dot3OamCriticalEventEnable         TruthValue
+             }
+
+   dot3OamErrSymPeriodWindowHi OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "2^32 symbols"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The two objects dot3OamErrSymPeriodWindowHi and
+       dot3OamErrSymPeriodLo together form an unsigned 64-bit
+       integer representing the number of symbols over which this
+       threshold event is defined.  This is defined as
+     dot3OamErrSymPeriodWindow = ((2^32)*dot3OamErrSymPeriodWindowHi)
+                                       + dot3OamErrSymPeriodWindowLo
+
+       If dot3OamErrSymPeriodThreshold symbol errors occur within a
+       window of dot3OamErrSymPeriodWindow symbols, an Event
+       Notification OAMPDU should be generated with an Errored Symbol
+       Period Event TLV indicating that the threshold has been
+       crossed in this window.
+
+       The default value for dot3OamErrSymPeriodWindow is the number
+       of symbols in one second for the underlying physical layer.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.34"
+     ::= { dot3OamEventConfigEntry 1 }
+
+   dot3OamErrSymPeriodWindowLo OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "symbols"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The two objects dot3OamErrSymPeriodWindowHi and
+       dot3OamErrSymPeriodWindowLo together form an unsigned 64-bit
+       integer representing the number of symbols over which this
+       threshold event is defined.  This is defined as
+
+     dot3OamErrSymPeriodWindow = ((2^32)*dot3OamErrSymPeriodWindowHi)
+                                       + dot3OamErrSymPeriodWindowLo
+
+       If dot3OamErrSymPeriodThreshold symbol errors occur within a
+       window of dot3OamErrSymPeriodWindow symbols, an Event
+       Notification OAMPDU should be generated with an Errored Symbol
+       Period Event TLV indicating that the threshold has been
+       crossed in this window.
+
+       The default value for dot3OamErrSymPeriodWindow is the number
+       of symbols in one second for the underlying physical layer.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.34"
+     ::= { dot3OamEventConfigEntry 2 }
+
+   dot3OamErrSymPeriodThresholdHi OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "2^32 symbols"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The two objects dot3OamErrSymPeriodThresholdHi and
+       dot3OamErrSymPeriodThresholdLo together form an unsigned
+       64-bit integer representing the number of symbol errors that
+       must occur within a given window to cause this event.
+
+       This is defined as
+
+         dot3OamErrSymPeriodThreshold =
+                           ((2^32) * dot3OamErrSymPeriodThresholdHi)
+                                   + dot3OamErrSymPeriodThresholdLo
+
+       If dot3OamErrSymPeriodThreshold symbol errors occur within a
+       window of dot3OamErrSymPeriodWindow symbols, an Event
+       Notification OAMPDU should be generated with an Errored Symbol
+       Period Event TLV indicating that the threshold has been
+       crossed in this window.
+
+       The default value for dot3OamErrSymPeriodThreshold is one
+       symbol errors.  If the threshold value is zero, then an Event
+
+       Notification OAMPDU is sent periodically (at the end of every
+       window).  This can be used as an asynchronous notification to
+       the peer OAM entity of the statistics related to this
+       threshold crossing alarm.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.34"
+     ::= { dot3OamEventConfigEntry 3 }
+
+   dot3OamErrSymPeriodThresholdLo OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "symbols"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The two objects dot3OamErrSymPeriodThresholdHi and
+       dot3OamErrSymPeriodThresholdLo together form an unsigned
+       64-bit integer representing the number of symbol errors that
+       must occur within a given window to cause this event.
+
+       This is defined as
+
+         dot3OamErrSymPeriodThreshold =
+                           ((2^32) * dot3OamErrSymPeriodThresholdHi)
+                                   + dot3OamErrSymPeriodThresholdLo
+
+       If dot3OamErrSymPeriodThreshold symbol errors occur within a
+       window of dot3OamErrSymPeriodWindow symbols, an Event
+       Notification OAMPDU should be generated with an Errored Symbol
+       Period Event TLV indicating that the threshold has been
+       crossed in this window.
+
+       The default value for dot3OamErrSymPeriodThreshold is one
+       symbol error.  If the threshold value is zero, then an Event
+       Notification OAMPDU is sent periodically (at the end of every
+       window).  This can be used as an asynchronous notification to
+       the peer OAM entity of the statistics related to this
+       threshold crossing alarm.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.34"
+     ::= { dot3OamEventConfigEntry 4 }
+
+   dot3OamErrSymPeriodEvNotifEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "If true, the OAM entity should send an Event Notification
+       OAMPDU when an Errored Symbol Period Event occurs.
+
+       By default, this object should have the value true for
+       Ethernet-like interfaces that support OAM.  If the OAM layer
+       does not support Event Notifications (as indicated via the
+       dot3OamFunctionsSupported attribute), this value is ignored.
+       "
+     ::= { dot3OamEventConfigEntry 5 }
+
+   dot3OamErrFramePeriodWindow OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "frames"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The number of frames over which the threshold is defined.
+       The default value of the window is the number of minimum size
+       Ethernet frames that can be received over the physical layer
+       in one second.
+
+       If dot3OamErrFramePeriodThreshold frame errors occur within a
+       window of dot3OamErrFramePeriodWindow frames, an Event
+       Notification OAMPDU should be generated with an Errored Frame
+       Period Event TLV indicating that the threshold has been
+       crossed in this window.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.38"
+     ::= { dot3OamEventConfigEntry 6 }
+
+   dot3OamErrFramePeriodThreshold OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "frames"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The number of frame errors that must occur for this event to
+       be triggered.  The default value is one frame error.  If the
+       threshold value is zero, then an Event Notification OAMPDU is
+       sent periodically (at the end of every window).  This can be
+       used as an asynchronous notification to the peer OAM entity of
+       the statistics related to this threshold crossing alarm.
+
+       If dot3OamErrFramePeriodThreshold frame errors occur within a
+       window of dot3OamErrFramePeriodWindow frames, an Event
+       Notification OAMPDU should be generated with an Errored Frame
+       Period Event TLV indicating that the threshold has been
+       crossed in this window.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.38"
+     ::= { dot3OamEventConfigEntry 7 }
+
+   dot3OamErrFramePeriodEvNotifEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "If true, the OAM entity should send an Event Notification
+       OAMPDU when an Errored Frame Period Event occurs.
+
+       By default, this object should have the value true for
+       Ethernet-like interfaces that support OAM.  If the OAM layer
+       does not support Event Notifications (as indicated via the
+       dot3OamFunctionsSupported attribute), this value is ignored.
+       "
+     ::= { dot3OamEventConfigEntry 8 }
+
+   dot3OamErrFrameWindow OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "tenths of a second"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The amount of time (in 100ms increments) over which the
+       threshold is defined.  The default value is 10 (1 second).
+
+       If dot3OamErrFrameThreshold frame errors occur within a window
+       of dot3OamErrFrameWindow seconds (measured in tenths of
+       seconds), an Event Notification OAMPDU should be generated
+       with an Errored Frame Event TLV indicating that the threshold
+       has been crossed in this window.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.36"
+     DEFVAL { 10 }
+     ::= { dot3OamEventConfigEntry 9 }
+
+   dot3OamErrFrameThreshold OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "frames"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The number of frame errors that must occur for this event to
+       be triggered.  The default value is one frame error.  If the
+       threshold value is zero, then an Event Notification OAMPDU is
+       sent periodically (at the end of every window).  This can be
+       used as an asynchronous notification to the peer OAM entity of
+       the statistics related to this threshold crossing alarm.
+
+       If dot3OamErrFrameThreshold frame errors occur within a window
+       of dot3OamErrFrameWindow (in tenths of seconds), an Event
+       Notification OAMPDU should be generated with an Errored Frame
+       Event TLV indicating the threshold has been crossed in this
+       window.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.36"
+     DEFVAL { 1 }
+     ::= { dot3OamEventConfigEntry 10 }
+
+   dot3OamErrFrameEvNotifEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "If true, the OAM entity should send an Event Notification
+       OAMPDU when an Errored Frame Event occurs.
+
+       By default, this object should have the value true for
+       Ethernet-like interfaces that support OAM.  If the OAM layer
+       does not support Event Notifications (as indicated via the
+       dot3OamFunctionsSupported attribute), this value is ignored.
+       "
+     DEFVAL { true }
+     ::= { dot3OamEventConfigEntry 11 }
+
+   dot3OamErrFrameSecsSummaryWindow OBJECT-TYPE
+     SYNTAX      Integer32 (100..9000)
+     UNITS       "tenths of a second"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The amount of time (in 100 ms intervals) over which the
+       threshold is defined.  The default value is 100 (10 seconds).
+
+       If dot3OamErrFrameSecsSummaryThreshold frame errors occur
+       within a window of dot3OamErrFrameSecsSummaryWindow (in tenths
+       of seconds), an Event Notification OAMPDU should be generated
+       with an Errored Frame Seconds Summary Event TLV indicating
+       that the threshold has been crossed in this window.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.40"
+     DEFVAL { 100 }
+     ::= { dot3OamEventConfigEntry 12 }
+
+   dot3OamErrFrameSecsSummaryThreshold OBJECT-TYPE
+     SYNTAX      Integer32 (1..900)
+     UNITS       "errored frame seconds"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The number of errored frame seconds that must occur for this
+       event to be triggered.  The default value is one errored frame
+       second.  If the threshold value is zero, then an Event
+       Notification OAMPDU is sent periodically (at the end of every
+       window).  This can be used as an asynchronous notification to
+       the peer OAM entity of the statistics related to this
+       threshold crossing alarm.
+
+       If dot3OamErrFrameSecsSummaryThreshold frame errors occur
+       within a window of dot3OamErrFrameSecsSummaryWindow (in tenths
+       of seconds), an Event Notification OAMPDU should be generated
+       with an Errored Frame Seconds Summary Event TLV indicating
+       that the threshold has been crossed in this window.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.40"
+     DEFVAL { 1 }
+     ::= { dot3OamEventConfigEntry 13 }
+
+   dot3OamErrFrameSecsEvNotifEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "If true, the local OAM entity should send an Event
+       Notification OAMPDU when an Errored Frame Seconds Event
+       occurs.
+
+       By default, this object should have the value true for
+       Ethernet-like interfaces that support OAM.  If the OAM layer
+       does not support Event Notifications (as indicated via the
+       dot3OamFunctionsSupported attribute), this value is ignored.
+       "
+     DEFVAL { true }
+     ::= { dot3OamEventConfigEntry 14 }
+
+   dot3OamDyingGaspEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "If true, the local OAM entity should attempt to indicate a
+       dying gasp via the OAMPDU flags field to its peer OAM entity
+       when a dying gasp event occurs.  The exact definition of a
+       dying gasp event is implementation dependent.  If the system
+
+       does not support dying gasp capability, setting this object
+       has no effect, and reading the object should always result in
+       'false'.
+
+       By default, this object should have the value true for
+       Ethernet-like interfaces that support OAM.  If the OAM layer
+       does not support Event Notifications (as indicated via the
+       dot3OamFunctionsSupported attribute), this value is ignored.
+       "
+     DEFVAL { true }
+     ::= { dot3OamEventConfigEntry 15 }
+
+   dot3OamCriticalEventEnable OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "If true, the local OAM entity should attempt to indicate a
+       critical event via the OAMPDU flags to its peer OAM entity
+       when a critical event occurs.  The exact definition of a
+       critical event is implementation dependent.  If the system
+       does not support critical event capability, setting this
+       object has no effect, and reading the object should always
+       result in 'false'.
+
+       By default, this object should have the value true for
+       Ethernet-like interfaces that support OAM.  If the OAM layer
+       does not support Event Notifications (as indicated via the
+       dot3OamFunctionsSupported attribute), this value is ignored.
+       "
+     DEFVAL { true }
+     ::= { dot3OamEventConfigEntry 16 }
+
+   -- **************************************************************
+   --
+   -- Ethernet OAM Event Log group
+   --
+
+   dot3OamEventLogTable OBJECT-TYPE
+     SYNTAX       SEQUENCE OF Dot3OamEventLogEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+       "This table records a history of the events that have occurred
+       at the Ethernet OAM level.  These events can include locally
+       detected events, which may result in locally generated
+       OAMPDUs, and remotely detected events, which are detected by
+       the OAM peer entity and signaled to the local entity via
+
+       Ethernet OAM.  Ethernet OAM events can be signaled by Event
+       Notification OAMPDUs or by the flags field in any OAMPDU.
+
+       This table contains both threshold crossing events and
+       non-threshold crossing events.  The parameters for the
+       threshold window, threshold value, and actual value
+       (dot3OamEventLogWindowXX, dot3OamEventLogThresholdXX,
+       dot3OamEventLogValue) are only applicable to threshold
+       crossing events, and are returned as all F's (2^32 - 1) for
+       non-threshold crossing events.
+
+       Entries in the table are automatically created when such
+       events are detected.  The size of the table is implementation
+       dependent.  When the table reaches its maximum size, older
+       entries are automatically deleted to make room for newer
+       entries.
+       "
+       ::= { dot3OamObjects 6 }
+
+   dot3OamEventLogEntry OBJECT-TYPE
+     SYNTAX      Dot3OamEventLogEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the dot3OamEventLogTable.  Entries are
+       automatically created whenever Ethernet OAM events occur at
+       the local OAM entity, and when Event Notification OAMPDUs are
+       received at the local OAM entity (indicating that events have
+       occurred at the peer OAM entity).  The size of the table is
+       implementation dependent, but when the table becomes full,
+       older events are automatically deleted to make room for newer
+       events.  The table index dot3OamEventLogIndex increments for
+       each new entry, and when the maximum value is reached, the
+       value restarts at zero.
+       "
+     INDEX       { ifIndex, dot3OamEventLogIndex }
+     ::= { dot3OamEventLogTable 1 }
+
+   Dot3OamEventLogEntry ::=
+     SEQUENCE {
+       dot3OamEventLogIndex                Unsigned32,
+       dot3OamEventLogTimestamp            TimeStamp,
+       dot3OamEventLogOui                  EightOTwoOui,
+       dot3OamEventLogType                 Unsigned32,
+       dot3OamEventLogLocation             INTEGER,
+       dot3OamEventLogWindowHi             Unsigned32,
+       dot3OamEventLogWindowLo             Unsigned32,
+       dot3OamEventLogThresholdHi          Unsigned32,
+       dot3OamEventLogThresholdLo          Unsigned32,
+       dot3OamEventLogValue                CounterBasedGauge64,
+       dot3OamEventLogRunningTotal         CounterBasedGauge64,
+       dot3OamEventLogEventTotal           Unsigned32
+     }
+
+   dot3OamEventLogIndex       OBJECT-TYPE
+     SYNTAX      Unsigned32(1..4294967295)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An arbitrary integer for identifying individual events
+       within the event log.  "
+     ::= { dot3OamEventLogEntry 1 }
+
+   dot3OamEventLogTimestamp  OBJECT-TYPE
+     SYNTAX      TimeStamp
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The value of sysUpTime at the time of the logged event.  For
+       locally generated events, the time of the event can be
+       accurately retrieved from sysUpTime.  For remotely generated
+       events, the time of the event is indicated by the reception of
+       the Event Notification OAMPDU indicating that the event
+       occurred on the peer.  A system may attempt to adjust the
+       timestamp value to more accurately reflect the time of the
+       event at the peer OAM entity by using other information, such
+       as that found in the timestamp found of the Event Notification
+       TLVs, which provides an indication of the relative time
+       between events at the peer entity.  "
+     ::= { dot3OamEventLogEntry 2 }
+
+   dot3OamEventLogOui  OBJECT-TYPE
+     SYNTAX      EightOTwoOui
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The OUI of the entity defining the object type.  All IEEE
+       802.3 defined events (as appearing in [802.3ah] except for the
+       Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of
+       0x0180C2.  Organizations defining their own Event Notification
+       TLVs include their OUI in the Event Notification TLV that
+       gets reflected here.  "
+     ::= { dot3OamEventLogEntry 3 }
+
+   dot3OamEventLogType      OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The type of event that generated this entry in the event log.
+       When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following
+       event types are defined:
+           erroredSymbolEvent(1),
+           erroredFramePeriodEvent(2),
+           erroredFrameEvent(3),
+           erroredFrameSecondsEvent(4),
+           linkFault(256),
+           dyingGaspEvent(257),
+           criticalLinkEvent(258)
+       The first four are considered threshold crossing events, as
+       they are generated when a metric exceeds a given value within
+       a specified window.  The other three are not threshold
+       crossing events.
+
+       When the OUI is not 71874 (0x0180C2 in hex), then some other
+       organization has defined the event space.  If event subtyping
+       is known to the implementation, it may be reflected here.
+       Otherwise, this value should return all F's (2^32 - 1).
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.10 and 57.5.3."
+     ::= { dot3OamEventLogEntry 4 }
+
+   dot3OamEventLogLocation OBJECT-TYPE
+     SYNTAX      INTEGER { local(1), remote(2) }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Whether this event occurred locally (local(1)), or was
+       received from the OAM peer via Ethernet OAM (remote(2)).
+       "
+     ::= { dot3OamEventLogEntry 5 }
+
+   dot3OamEventLogWindowHi      OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "If the event represents a threshold crossing event, the two
+       objects dot3OamEventWindowHi and dot3OamEventWindowLo, form
+       an unsigned 64-bit integer yielding the window over which the
+       value was measured for the threshold crossing event (for
+       example, 5, when 11 occurrences happened in 5 seconds while
+       the threshold was 10).  The two objects are combined as:
+
+       dot3OamEventLogWindow = ((2^32) * dot3OamEventLogWindowHi)
+                                       + dot3OamEventLogWindowLo
+
+       Otherwise, this value is returned as all F's (2^32 - 1) and
+       adds no useful information.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 6 }
+
+   dot3OamEventLogWindowLo      OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "If the event represents a threshold crossing event, the two
+       objects dot3OamEventWindowHi and dot3OamEventWindowLo form an
+       unsigned 64-bit integer yielding the window over which the
+       value was measured for the threshold crossing event (for
+       example, 5, when 11 occurrences happened in 5 seconds while
+       the threshold was 10).  The two objects are combined as:
+
+       dot3OamEventLogWindow = ((2^32) * dot3OamEventLogWindowHi)
+                                       + dot3OamEventLogWindowLo
+
+       Otherwise, this value is returned as all F's (2^32 - 1) and
+       adds no useful information.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 7 }
+
+   dot3OamEventLogThresholdHi      OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "If the event represents a threshold crossing event, the two
+       objects dot3OamEventThresholdHi and dot3OamEventThresholdLo
+       form an unsigned 64-bit integer yielding the value that was
+       crossed for the threshold crossing event (for example, 10,
+       when 11 occurrences happened in 5 seconds while the threshold
+       was 10).  The two objects are combined as:
+
+     dot3OamEventLogThreshold = ((2^32) * dot3OamEventLogThresholdHi)
+                                        + dot3OamEventLogThresholdLo
+
+       Otherwise, this value is returned as all F's (2^32 -1) and
+       adds no useful information.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 8 }
+
+   dot3OamEventLogThresholdLo      OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "If the event represents a threshold crossing event, the two
+       objects dot3OamEventThresholdHi and dot3OamEventThresholdLo
+       form an unsigned 64-bit integer yielding the value that was
+       crossed for the threshold crossing event (for example, 10,
+       when 11 occurrences happened in 5 seconds while the threshold
+       was 10).  The two objects are combined as:
+
+     dot3OamEventLogThreshold = ((2^32) * dot3OamEventLogThresholdHi)
+                                        + dot3OamEventLogThresholdLo
+
+       Otherwise, this value is returned as all F's (2^32 - 1) and
+       adds no useful information.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 9 }
+
+   dot3OamEventLogValue      OBJECT-TYPE
+     SYNTAX      CounterBasedGauge64
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "If the event represents a threshold crossing event, this
+       value indicates the value of the parameter within the given
+       window that generated this event (for example, 11, when 11
+       occurrences happened in 5 seconds while the threshold was 10).
+
+       Otherwise, this value is returned as all F's
+       (2^64 - 1) and adds no useful information.
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 10 }
+
+   dot3OamEventLogRunningTotal      OBJECT-TYPE
+     SYNTAX      CounterBasedGauge64
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Each Event Notification TLV contains a running total of the
+       number of times an event has occurred, as well as the number
+       of times an Event Notification for the event has been
+
+       transmitted.  For non-threshold crossing events, the number of
+       events (dot3OamLogRunningTotal) and the number of resultant
+       Event Notifications (dot3OamLogEventTotal) should be
+       identical.
+
+       For threshold crossing events, since multiple occurrences may
+       be required to cross the threshold, these values are likely
+       different.  This value represents the total number of times
+       this event has happened since the last reset (for example,
+       3253, when 3253 symbol errors have occurred since the last
+       reset, which has resulted in 51 symbol error threshold
+       crossing events since the last reset).
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 11 }
+
+   dot3OamEventLogEventTotal      OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Each Event Notification TLV contains a running total of the
+       number of times an event has occurred, as well as the number
+       of times an Event Notification for the event has been
+       transmitted.  For non-threshold crossing events, the number of
+       events (dot3OamLogRunningTotal) and the number of resultant
+       Event Notifications (dot3OamLogEventTotal) should be
+       identical.
+
+       For threshold crossing events, since multiple occurrences may
+       be required to cross the threshold, these values are likely
+       different.  This value represents the total number of times
+       one or more of these occurrences have resulted in an Event
+       Notification (for example, 51 when 3253 symbol errors have
+       occurred since the last reset, which has resulted in 51 symbol
+       error threshold crossing events since the last reset).
+       "
+     REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
+     ::= { dot3OamEventLogEntry 12 }
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Notifications
+   --
+
+   dot3OamThresholdEvent NOTIFICATION-TYPE
+     OBJECTS { dot3OamEventLogTimestamp,
+               dot3OamEventLogOui,
+               dot3OamEventLogType,
+               dot3OamEventLogLocation,
+               dot3OamEventLogWindowHi,
+               dot3OamEventLogWindowLo,
+               dot3OamEventLogThresholdHi,
+               dot3OamEventLogThresholdLo,
+               dot3OamEventLogValue,
+               dot3OamEventLogRunningTotal,
+               dot3OamEventLogEventTotal
+             }
+     STATUS  current
+     DESCRIPTION
+       "A dot3OamThresholdEvent notification is sent when a local or
+       remote threshold crossing event is detected.  A local
+       threshold crossing event is detected by the local entity,
+       while a remote threshold crossing event is detected by the
+       reception of an Ethernet OAM Event Notification OAMPDU
+       that indicates a threshold event.
+
+       This notification should not be sent more than once per
+       second.
+
+       The OAM entity can be derived from extracting the ifIndex from
+       the variable bindings.  The objects in the notification
+       correspond to the values in a row instance in the
+       dot3OamEventLogTable.
+
+       The management entity should periodically check
+       dot3OamEventLogTable to detect any missed events."
+    ::= { dot3OamNotifications 1 }
+
+   dot3OamNonThresholdEvent NOTIFICATION-TYPE
+     OBJECTS { dot3OamEventLogTimestamp,
+               dot3OamEventLogOui,
+               dot3OamEventLogType,
+               dot3OamEventLogLocation,
+               dot3OamEventLogEventTotal
+             }
+     STATUS  current
+     DESCRIPTION
+       "A dot3OamNonThresholdEvent notification is sent when a local
+       or remote non-threshold crossing event is detected.  A local
+       event is detected by the local entity, while a remote event is
+       detected by the reception of an Ethernet OAM Event
+       Notification OAMPDU that indicates a non-threshold crossing
+       event.
+
+       This notification should not be sent more than once per
+
+       second.
+
+       The OAM entity can be derived from extracting the ifIndex from
+       the variable bindings.  The objects in the notification
+       correspond to the values in a row instance of the
+       dot3OamEventLogTable.
+
+       The management entity should periodically check
+       dot3OamEventLogTable to detect any missed events."
+    ::= { dot3OamNotifications 2 }
+
+   -- ***************************************************************
+   --
+   -- Ethernet OAM Compliance group
+   --
+
+   dot3OamGroups OBJECT IDENTIFIER ::= { dot3OamConformance 1 }
+   dot3OamCompliances OBJECT IDENTIFIER ::= { dot3OamConformance 2 }
+
+   -- Compliance statements
+
+   dot3OamCompliance MODULE-COMPLIANCE
+     STATUS          current
+     DESCRIPTION "The compliance statement for managed entities
+                  supporting OAM on Ethernet-like interfaces.
+                  "
+   MODULE   -- this module
+     MANDATORY-GROUPS { dot3OamControlGroup,
+                        dot3OamPeerGroup,
+                        dot3OamStatsBaseGroup
+                      }
+
+     GROUP       dot3OamLoopbackGroup
+     DESCRIPTION
+       "This group is mandatory for all IEEE 802.3 OA
+       implementations that support loopback functionality. "
+
+     GROUP       dot3OamErrSymbolPeriodEventGroup
+     DESCRIPTION
+       "This group is mandatory for all IEEE 802.3 OA
+       implementations that support event functionality. "
+
+     GROUP       dot3OamErrFramePeriodEventGroup
+     DESCRIPTION
+       "This group is mandatory for all IEEE 802.3 OA
+       implementations that support event functionality. "
+
+     GROUP       dot3OamErrFrameEventGroup
+     DESCRIPTION
+       "This group is mandatory for all IEEE 802.3 OA
+       implementations that support event functionality. "
+
+     GROUP       dot3OamErrFrameSecsSummaryEventGroup
+     DESCRIPTION
+       "This group is mandatory for all IEEE 802.3 OA
+       implementations that support event functionality. "
+
+     GROUP        dot3OamFlagEventGroup
+     DESCRIPTION
+       "This group is optional for all IEEE 802.3 OA
+       implementations.  The ability to send critical events or dying
+       gasp events is not required in any system."
+
+     GROUP       dot3OamEventLogGroup
+     DESCRIPTION
+       "This group is optional for all IEEE 802.3 OA
+       implementations.  Entries in this table are dependent on what
+       event functionality is supported in the local OA
+       implementation.  At least one type of event must be supported
+       for entries to appear in this table.  "
+
+     GROUP       dot3OamNotificationGroup
+     DESCRIPTION
+       "This group is optional for all IEEE 802.3 OA
+       implementations.  Since the information in the notifications
+       is dependent on the dot3OamEventLogTable, that table must be
+       implemented for notifications.  "
+     ::= { dot3OamCompliances 1}
+
+  dot3OamControlGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamAdminState,
+                     dot3OamOperStatus,
+                     dot3OamMode,
+                     dot3OamMaxOamPduSize,
+                     dot3OamConfigRevision,
+                     dot3OamFunctionsSupported
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects providing the abilities,
+       configuration, and status of an Ethernet OAM entity.  "
+     ::= { dot3OamGroups 1 }
+
+  dot3OamPeerGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamPeerMacAddress,
+                     dot3OamPeerVendorOui,
+                     dot3OamPeerVendorInfo,
+                     dot3OamPeerMode,
+                     dot3OamPeerFunctionsSupported,
+                     dot3OamPeerMaxOamPduSize,
+                     dot3OamPeerConfigRevision
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects providing the abilities,
+       configuration, and status of a peer Ethernet OAM entity.  "
+     ::= { dot3OamGroups 2 }
+
+  dot3OamStatsBaseGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamInformationTx,
+                     dot3OamInformationRx,
+                     dot3OamUniqueEventNotificationTx,
+                     dot3OamUniqueEventNotificationRx,
+                     dot3OamDuplicateEventNotificationTx,
+                     dot3OamDuplicateEventNotificationRx,
+                     dot3OamLoopbackControlTx,
+                     dot3OamLoopbackControlRx,
+                     dot3OamVariableRequestTx,
+                     dot3OamVariableRequestRx,
+                     dot3OamVariableResponseTx,
+                     dot3OamVariableResponseRx,
+                     dot3OamOrgSpecificTx,
+                     dot3OamOrgSpecificRx,
+                     dot3OamUnsupportedCodesTx,
+                     dot3OamUnsupportedCodesRx,
+                     dot3OamFramesLostDueToOam
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects providing the statistics for the
+       number of various transmit and receive events for OAM on an
+       Ethernet-like interface.  Note that all of these counters must
+       be supported even if the related function (as described in
+       dot3OamFunctionsSupported) is not supported.  "
+     ::= { dot3OamGroups 3 }
+
+  dot3OamLoopbackGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamLoopbackStatus,
+                     dot3OamLoopbackIgnoreRx
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects for controlling the OAM remote
+
+       loopback function.  "
+     ::= { dot3OamGroups 4 }
+
+  dot3OamErrSymbolPeriodEventGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamErrSymPeriodWindowHi,
+                     dot3OamErrSymPeriodWindowLo,
+                     dot3OamErrSymPeriodThresholdHi,
+                     dot3OamErrSymPeriodThresholdLo,
+                     dot3OamErrSymPeriodEvNotifEnable
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects for configuring the thresholds for an
+       Errored Symbol Period Event.
+
+       Each [802.3ah] defined Event Notification TLV has its own
+       conformance group because each event can be implemented
+       independently of any other.  "
+     ::= { dot3OamGroups 5 }
+
+  dot3OamErrFramePeriodEventGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamErrFramePeriodWindow,
+                     dot3OamErrFramePeriodThreshold,
+                     dot3OamErrFramePeriodEvNotifEnable
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects for configuring the thresholds for an
+       Errored Frame Period Event.
+
+       Each [802.3ah] defined Event Notification TLV has its own
+       conformance group because each event can be implemented
+       independently of any other.  "
+     ::= { dot3OamGroups 6 }
+
+  dot3OamErrFrameEventGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamErrFrameWindow,
+                     dot3OamErrFrameThreshold,
+                     dot3OamErrFrameEvNotifEnable
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects for configuring the thresholds for an
+       Errored Frame Event.
+
+       Each [802.3ah] defined Event Notification TLV has its own
+       conformance group because each event can be implemented
+       independently of any other.  "
+     ::= { dot3OamGroups 7 }
+
+  dot3OamErrFrameSecsSummaryEventGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamErrFrameSecsSummaryWindow,
+                     dot3OamErrFrameSecsSummaryThreshold,
+                     dot3OamErrFrameSecsEvNotifEnable
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects for configuring the thresholds for an
+       Errored Frame Seconds Summary Event.
+
+       Each [802.3ah] defined Event Notification TLV has its own
+       conformance group because each event can be implemented
+       independently of any other.  "
+     ::= { dot3OamGroups 8 }
+
+  dot3OamFlagEventGroup OBJECT-GROUP
+     OBJECTS     {   dot3OamDyingGaspEnable,
+                     dot3OamCriticalEventEnable
+                 }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects for configuring the sending OAMPDUs
+       with the critical event flag or dying gasp flag enabled.  "
+     ::= { dot3OamGroups 9 }
+
+  dot3OamEventLogGroup OBJECT-GROUP
+    OBJECTS {  dot3OamEventLogTimestamp,
+               dot3OamEventLogOui,
+               dot3OamEventLogType,
+               dot3OamEventLogLocation,
+               dot3OamEventLogWindowHi,
+               dot3OamEventLogWindowLo,
+               dot3OamEventLogThresholdHi,
+               dot3OamEventLogThresholdLo,
+               dot3OamEventLogValue,
+               dot3OamEventLogRunningTotal,
+               dot3OamEventLogEventTotal
+             }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects for configuring the thresholds for an
+       Errored Frame Seconds Summary Event and maintaining the event
+       information.  "
+     ::= { dot3OamGroups 10 }
+
+  dot3OamNotificationGroup NOTIFICATION-GROUP
+
+    NOTIFICATIONS {
+                dot3OamThresholdEvent,
+                dot3OamNonThresholdEvent
+                  }
+    STATUS      current
+    DESCRIPTION
+      "A collection of notifications used by Ethernet OAM to signal
+      to a management entity that local or remote events have
+      occurred on a specified Ethernet link. "
+    ::= { dot3OamGroups 11 }
+
+   END
diff --git a/snmp_builder/mibs/DPI20-MIB.mib b/snmp_builder/mibs/DPI20-MIB.mib
new file mode 100644
index 0000000..9d030ca
--- /dev/null
+++ b/snmp_builder/mibs/DPI20-MIB.mib
@@ -0,0 +1,47 @@
+DPI20-MIB DEFINITIONS ::= BEGIN
+
+-- Objects in this MIB are implemented in the local SNMP agent.
+
+   IMPORTS
+           MODULE-IDENTITY, OBJECT-TYPE, snmpModules, enterprises
+                   FROM SNMPv2-SMI
+
+   ibm      OBJECT IDENTIFIER ::= { enterprises 2 }
+   ibmDPI   OBJECT IDENTIFIER ::= { ibm 2 }
+   dpi20MIB OBJECT IDENTIFIER ::= { ibmDPI 1 }
+
+-- dpi20MIB MODULE-IDENTITY
+--   LAST-UPDATED "9401210000Z"
+--   ORGANIZATION "IBM Research - T.J. Watson Research Center"
+--   CONTACT-INFO "           Bert Wijnen
+--                 Postal:    IBM International Operations
+--                            Watsonweg 2
+--                            1423 ND Uithoorn
+--                            The Netherlands
+
+--                 Tel:       +31 2975 53316
+--                 Fax:       +31 2975 62468
+--                 E-mail:    wijnen@vnet.ibm.com"
+--   DESCRIPTION "MIB module describing DPI objects."
+--   ::= { snmpModules x }
+
+   dpiPort  OBJECT IDENTIFIER ::= { dpi20MIB 1 }
+
+   dpiPortForTCP   OBJECT-TYPE
+           SYNTAX  INTEGER (0..65535)
+           ACCESS  read-only
+           STATUS  mandatory
+           DESCRIPTION "The TCP port number on which the agent
+                        listens for DPI connections. A zero value
+                        means the agent has no DPI TCP port."
+           ::= { dpiPort 1 }
+
+   dpiPortForUDP   OBJECT-TYPE
+           SYNTAX  INTEGER (0..65535)
+           ACCESS  read-only
+           STATUS  mandatory
+           DESCRIPTION "The UDP port number on which the agent
+                        listens for DPI packets. A zero value
+                        means the agent has no DPI UDP port."
+           ::= { dpiPort 2 }
+END
diff --git a/snmp_builder/mibs/DS0-MIB.mib b/snmp_builder/mibs/DS0-MIB.mib
new file mode 100644
index 0000000..8ba2ffc
--- /dev/null
+++ b/snmp_builder/mibs/DS0-MIB.mib
@@ -0,0 +1,305 @@
+DS0-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE,
+     transmission                     FROM SNMPv2-SMI
+     MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
+     DisplayString, TruthValue        FROM SNMPv2-TC
+     ifIndex, InterfaceIndex,
+     InterfaceIndexOrZero             FROM IF-MIB;
+
+--  This is the MIB module for the DS0 Interface objects.
+
+ds0 MODULE-IDENTITY
+    LAST-UPDATED "9807161630Z"
+    ORGANIZATION "IETF Trunk MIB Working Group"
+    CONTACT-INFO
+      "        David Fowler
+
+       Postal: Newbridge Networks Corporation
+               600 March Road
+               Kanata, Ontario, Canada K2K 2E6
+
+               Tel: +1 613 591 3600
+
+               Fax: +1 613 599 3619
+
+       E-mail: davef@newbridge.com"
+    DESCRIPTION
+         "The MIB module to describe
+          DS0 interfaces objects."
+    REVISION "9805242010Z"
+    DESCRIPTION
+         "Initial version of the DS0-MIB."
+    ::= { transmission 81 }
+
+-- The DS0 Config Group
+
+-- Implementation of this group is mandatory for all
+-- systems that use a DS0 Interface.
+
+-- The DS0 Config Group consists of two tables:
+--    DS0 Configuration Table
+--    DS0 Channel Mapping Table
+
+-- The DS0 Configuration Table
+
+dsx0ConfigTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dsx0ConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "The DS0 Configuration table."
+    ::= { ds0 1 }
+
+dsx0ConfigEntry OBJECT-TYPE
+    SYNTAX  Dsx0ConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "An entry in the DS0 Configuration table.  There
+            is an entry in this table for each DS0 interface."
+    INDEX   { ifIndex }
+    ::= { dsx0ConfigTable 1 }
+
+Dsx0ConfigEntry ::=
+    SEQUENCE {
+        dsx0Ds0ChannelNumber        INTEGER,
+        dsx0RobbedBitSignalling     TruthValue,
+        dsx0CircuitIdentifier       DisplayString,
+        dsx0IdleCode                INTEGER,
+        dsx0SeizedCode              INTEGER,
+        dsx0ReceivedCode            INTEGER,
+        dsx0TransmitCodesEnable     TruthValue,
+        dsx0Ds0BundleMappedIfIndex  InterfaceIndexOrZero
+}
+
+dsx0Ds0ChannelNumber OBJECT-TYPE
+    SYNTAX  INTEGER(0..31)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "This object indicates the channel number of the
+            ds0 on its DS1/E1."
+    ::= { dsx0ConfigEntry 1 }
+
+dsx0RobbedBitSignalling OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+            "This object indicates if Robbed Bit Signalling is
+            turned on or off for a given ds0.  This only
+            applies to DS0s on a DS1 link.  For E1 links the
+            value is always off (false)."
+    ::= { dsx0ConfigEntry 2 }
+
+dsx0CircuitIdentifier OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..255))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This object contains the transmission vendor's
+            circuit identifier, for the purpose of
+            facilitating troubleshooting."
+    ::= { dsx0ConfigEntry 3 }
+
+dsx0IdleCode OBJECT-TYPE
+     SYNTAX  INTEGER(0..15)
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This object contains the code transmitted in the
+            ABCD bits when the ds0 is not connected and
+            dsx0TransmitCodesEnable is enabled.  The object is
+            a bitmap and the various bit positions are:
+                  1     D bit
+                  2     C bit
+                  4     B bit
+                  8     A bit"
+    ::= { dsx0ConfigEntry 4 }
+
+dsx0SeizedCode OBJECT-TYPE
+     SYNTAX  INTEGER(0..15)
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This object contains the code transmitted in the
+            ABCD bits when the ds0 is connected and
+            dsx0TransmitCodesEnable is enabled.  The object is
+            a bitmap and the various bit positions are:
+                  1     D bit
+                  2     C bit
+                  4     B bit
+                  8     A bit"
+    ::= { dsx0ConfigEntry 5 }
+
+dsx0ReceivedCode OBJECT-TYPE
+     SYNTAX  INTEGER(0..15)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "This object contains the code being received in
+            the ABCD bits.  The object is a bitmap and the
+            various bit positions are:
+                  1     D bit
+                  2     C bit
+                  4     B bit
+                  8     A bit"
+    ::= { dsx0ConfigEntry 6 }
+
+dsx0TransmitCodesEnable OBJECT-TYPE
+     SYNTAX TruthValue
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This object determines if the idle and seized
+            codes are transmitted. If the value of this object
+            is true then the codes are transmitted."
+    ::= { dsx0ConfigEntry 7 }
+
+dsx0Ds0BundleMappedIfIndex OBJECT-TYPE
+     SYNTAX InterfaceIndexOrZero
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "This object indicates the ifIndex value assigned
+            by the agent for the ds0Bundle(82) ifEntry to
+
+            which the given ds0(81) ifEntry may belong.
+
+            If the given ds0(81) ifEntry does not belong to
+            any ds0Bundle(82) ifEntry, then this object has a
+            value of zero.
+
+            While this object provides information that can
+            also be found in the ifStackTable, it provides
+            this same information with a single table lookup,
+            rather than by walking the ifStackTable to find
+            the possibly non-existent ds0Bundle(82) ifEntry
+            that may be stacked above the given ds0(81)
+            ifTable entry."
+    ::= { dsx0ConfigEntry 8 }
+
+-- The DS0 Channel Mapping Table
+
+dsx0ChanMappingTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx0ChanMappingEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS0 Channel Mapping table.  This table maps a
+            DS0 channel number on a particular DS1/E1 into an
+            ifIndex."
+     ::= { ds0 3 }
+
+dsx0ChanMappingEntry OBJECT-TYPE
+     SYNTAX  Dsx0ChanMappingEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS0 Channel Mapping table.  There
+            is an entry in this table corresponding to each
+            ds0 ifEntry within any interface that is
+            channelized to the individual ds0 ifEntry level.
+
+            This table is intended to facilitate mapping from
+            channelized interface / channel number to DS0
+            ifEntry.  (e.g. mapping (DS1 ifIndex, DS0 Channel
+            Number) -> ifIndex)
+
+            While this table provides information that can
+            also be found in the ifStackTable and
+            dsx0ConfigTable, it provides this same information
+            with a single table lookup, rather than by walking
+            the ifStackTable to find the various constituent
+            ds0 ifTable entries, and testing various
+
+            dsx0ConfigTable entries to check for the entry
+            with the applicable DS0 channel number."
+     INDEX   { ifIndex, dsx0Ds0ChannelNumber }
+     ::= { dsx0ChanMappingTable 1 }
+
+Dsx0ChanMappingEntry ::=
+     SEQUENCE {
+         dsx0ChanMappedIfIndex  InterfaceIndex
+}
+
+dsx0ChanMappedIfIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "This object indicates the ifIndex value assigned
+            by the agent for the individual ds0 ifEntry that
+            corresponds to the given DS0 channel number
+            (specified by the INDEX element
+            dsx0Ds0ChannelNumber) of the given channelized
+            interface (specified by INDEX element ifIndex)."
+     ::= { dsx0ChanMappingEntry 1 }
+
+-- conformance information
+
+ds0Conformance OBJECT IDENTIFIER ::= { ds0 2 }
+
+ds0Groups      OBJECT IDENTIFIER ::= { ds0Conformance 1 }
+ds0Compliances OBJECT IDENTIFIER ::= { ds0Conformance 2 }
+
+-- compliance statements
+
+ds0Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for DS0 interfaces."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ds0ConfigGroup }
+
+        OBJECT dsx0RobbedBitSignalling
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set RBS is not required."
+        OBJECT dsx0CircuitIdentifier
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the circuit identifier is not
+            required."
+
+        OBJECT dsx0IdleCode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the idle code is not
+            required."
+
+        OBJECT dsx0SeizedCode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the seized code is not
+            required."
+
+        OBJECT dsx0TransmitCodesEnable
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to enable and disable the
+            transmitting of idle and seized codes is not
+            required."
+    ::= { ds0Compliances 1 }
+
+-- units of conformance
+
+ds0ConfigGroup  OBJECT-GROUP
+    OBJECTS { dsx0Ds0ChannelNumber,
+              dsx0RobbedBitSignalling,
+              dsx0CircuitIdentifier,
+              dsx0IdleCode,
+              dsx0SeizedCode,
+              dsx0ReceivedCode,
+              dsx0TransmitCodesEnable,
+              dsx0Ds0BundleMappedIfIndex,
+              dsx0ChanMappedIfIndex }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all DS0 interfaces."
+    ::= { ds0Groups 1 }
+
+END
diff --git a/snmp_builder/mibs/DS0BUNDLE-MIB.mib b/snmp_builder/mibs/DS0BUNDLE-MIB.mib
new file mode 100644
index 0000000..55abb7b
--- /dev/null
+++ b/snmp_builder/mibs/DS0BUNDLE-MIB.mib
@@ -0,0 +1,311 @@
+DS0BUNDLE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE,
+     transmission                      FROM SNMPv2-SMI
+     MODULE-COMPLIANCE, OBJECT-GROUP   FROM SNMPv2-CONF
+     DisplayString, RowStatus,
+     TestAndIncr                       FROM SNMPv2-TC
+     ifIndex, InterfaceIndex           FROM IF-MIB;
+
+--  This is the MIB module for the DS0Bundle Interface
+--  objects.
+
+ds0Bundle MODULE-IDENTITY
+    LAST-UPDATED "9807161630Z"
+    ORGANIZATION "IETF Trunk MIB Working Group"
+    CONTACT-INFO
+      "        David Fowler
+
+       Postal: Newbridge Networks Corporation
+               600 March Road
+               Kanata, Ontario, Canada K2K 2E6
+
+               Tel: +1 613 591 3600
+               Fax: +1 613 599 3619
+
+       E-mail: davef@newbridge.com"
+    DESCRIPTION
+         "The MIB module to describe
+          DS0 Bundle interfaces objects."
+    REVISION "9805242010Z"
+    DESCRIPTION
+         "Initial version of the DS0BUNDLE-MIB."
+    ::= { transmission 82 }
+
+--
+-- The DS0 Bundle Config Group
+--
+-- Implementation of this group is mandatory for all
+-- systems that use a DS0Bundle Interface.
+--
+-- The DS0 Bundle Config Group consists of one table:
+--    DS0 Bundle Table
+
+--  The DS0 Bundle Table
+
+dsx0BundleNextIndex OBJECT-TYPE
+    SYNTAX  TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+            "This object is used to assist the manager in
+            selecting a value for dsx0BundleIndex.  Because
+            this object is of syntax TestAndIncr (see the
+            SNMPv2-TC document, RFC 1903) it can also be used
+            to avoid race conditions with multiple managers
+            trying to create rows in the table.
+
+            If the result of the SET for dsx0BundleNextIndex
+            is not success, this means the value has been
+            changed from index (i.e. another manager used the
+            value), so a new value is required.
+
+            The algorithm is:
+            done = false
+            while done == false
+                index = GET (dsx0BundleNextIndex.0)
+                SET (dsx0BundleNextIndex.0=index)
+                if (set failed)
+                  done = false
+                else
+                  SET(dsx0BundleRowStatus.index=createAndGo)
+                  if (set failed)
+                    done = false
+                  else
+                    done = true
+                    other error handling"
+    ::= { ds0Bundle 2 }
+
+dsx0BundleTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dsx0BundleEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "There is an row in this table for each ds0Bundle
+            in the system.  This table can be used to
+            (indirectly) create rows in the ifTable with
+            ifType = 'ds0Bundle(82)'."
+    ::= { ds0Bundle 3 }
+
+dsx0BundleEntry OBJECT-TYPE
+    SYNTAX  Dsx0BundleEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "There is a row in entry in this table for each
+            ds0Bundle interface."
+    INDEX   { dsx0BundleIndex }
+    ::= { dsx0BundleTable 1 }
+
+Dsx0BundleEntry ::=
+    SEQUENCE {
+        dsx0BundleIndex              INTEGER,
+        dsx0BundleIfIndex            InterfaceIndex,
+        dsx0BundleCircuitIdentifier  DisplayString,
+        dsx0BundleRowStatus          RowStatus
+}
+
+dsx0BundleIndex OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "A unique identifier for a ds0Bundle.  This is not
+            the same value as ifIndex.  This table is not
+            indexed by ifIndex because the manager has to
+            choose the index in a createable row and the agent
+            must be allowed to select ifIndex values."
+    ::= { dsx0BundleEntry 1 }
+
+dsx0BundleIfIndex OBJECT-TYPE
+    SYNTAX  InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The ifIndex value the agent selected for the
+            (new) ds0Bundle interface."
+    ::= { dsx0BundleEntry 2 }
+
+dsx0BundleCircuitIdentifier OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..255))
+     MAX-ACCESS  read-create
+     STATUS  current
+     DESCRIPTION
+            "This variable contains the transmission vendor's
+            circuit identifier, for the purpose of
+            facilitating troubleshooting."
+     ::= { dsx0BundleEntry 3 }
+
+dsx0BundleRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+            "This object is used to create and delete rows in
+            this table."
+    ::= { dsx0BundleEntry 4 }
+
+-- The DS0 Bonding Group
+
+-- Implementation of this group is optional for all
+-- systems that use a DS0Bundle Interface.
+
+-- The DS0 Bonding Group consists of one table:
+--    DS0 Bonding Table
+
+-- The DS0 Bonding Table
+
+dsx0BondingTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dsx0BondingEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "The DS0 Bonding table."
+    ::= { ds0Bundle 1 }
+
+dsx0BondingEntry OBJECT-TYPE
+    SYNTAX  Dsx0BondingEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+            "An entry in the DS0 Bonding table.  There is a
+            row in this table for each DS0Bundle interface."
+    INDEX   { ifIndex }
+    ::= { dsx0BondingTable 1 }
+
+Dsx0BondingEntry ::=
+    SEQUENCE {
+        dsx0BondMode            INTEGER,
+        dsx0BondStatus          INTEGER,
+        dsx0BondRowStatus       RowStatus
+}
+
+dsx0BondMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                none(1),
+                other(2),
+                mode0(3),
+                mode1(4),
+                mode2(5),
+                mode3(6)
+    }
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+            "This object indicates which BONDing mode is used,
+            if any, for a ds0Bundle.  Mode0 provides parameter
+            and number exchange with no synchronization.  Mode
+            1 provides parameter and number exchange.  Mode 1
+            also provides synchronization during
+            initialization but does not include inband
+            monitoring.  Mode 2 provides all of the above plus
+            inband monitoring.  Mode 2 also steals 1/64th of
+            the bandwidth of each channel (thus not supporting
+            n x 56/64 kbit/s data channels for most values of
+            n). Mode 3 provides all of the above, but also
+            provides n x 56/64 kbit/s data channels.  Most
+            common implementations of Mode 3 add an extra
+            channel to support the inband monitoring overhead.
+            ModeNone should be used when the interface is not
+            performing bandwidth-on-demand."
+    ::= { dsx0BondingEntry 1 }
+
+dsx0BondStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                idle(1),
+                callSetup(2),
+                dataTransfer(3)
+    }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "This object indicates the current status of the
+            bonding call using this ds0Bundle. idle(1) should
+            be used when the bonding mode is set to none(1)."
+    ::= { dsx0BondingEntry 2 }
+
+dsx0BondRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+            "This object is used to create new rows in this
+            table, modify existing rows, and to delete
+            existing rows."
+    ::= { dsx0BondingEntry 3 }
+
+-- conformance information
+
+ds0BundleConformance OBJECT IDENTIFIER ::= { ds0Bundle 4 }
+
+ds0BundleGroups      OBJECT IDENTIFIER
+    ::= { ds0BundleConformance 1 }
+
+ds0BundleCompliances OBJECT IDENTIFIER
+    ::= { ds0BundleConformance 2 }
+
+-- compliance statements
+
+ds0BundleCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for DS0Bundle
+            interfaces."
+    MODULE  -- this module
+        MANDATORY-GROUPS {ds0BundleConfigGroup }
+
+        GROUP       ds0BondingGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS0Bundle Interface."
+
+        OBJECT      dsx0BundleRowStatus
+        SYNTAX      INTEGER {
+                        active(1),
+                        createAndGo(4),
+                        destroy(6)
+                    }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object, and only three of the
+            six enumerated values for the RowStatus textual
+            convention need be supported.  Only supporting
+            createAndGo for a creation process prevents the
+            manager from creating an inactive row in the
+            ds0BundleTable.  Inactive rows in the
+            ds0BundleTable do not make sense."
+
+        OBJECT      dsx0BundleCircuitIdentifier
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+
+            operation to this object."
+                ::= { ds0BundleCompliances 1 }
+
+            -- units of conformance
+
+            ds0BondingGroup  OBJECT-GROUP
+                OBJECTS { dsx0BondMode,
+                          dsx0BondStatus,
+                          dsx0BondRowStatus }
+                STATUS  current
+                DESCRIPTION
+                        "A collection of objects providing
+                        configuration information applicable
+                        to all DS0 interfaces."
+    ::= { ds0BundleGroups 1 }
+ds0BundleConfigGroup  OBJECT-GROUP
+    OBJECTS { dsx0BundleNextIndex,
+              dsx0BundleIfIndex,
+              dsx0BundleCircuitIdentifier,
+              dsx0BundleRowStatus }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing the ability to
+            create a new ds0Bundle in the ifTable as well as
+            configuration information about the ds0Bundle."
+    ::= { ds0BundleGroups 2 }
+END
diff --git a/snmp_builder/mibs/DS1-MIB.mib b/snmp_builder/mibs/DS1-MIB.mib
new file mode 100644
index 0000000..d5ae9ee
--- /dev/null
+++ b/snmp_builder/mibs/DS1-MIB.mib
@@ -0,0 +1,3015 @@
+DS1-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE,
+     NOTIFICATION-TYPE, transmission
+     FROM SNMPv2-SMI         -- [RFC2578]
+     DisplayString, TimeStamp, TruthValue
+     FROM SNMPv2-TC          -- [RFC2579]
+     MODULE-COMPLIANCE, OBJECT-GROUP,
+     NOTIFICATION-GROUP
+     FROM SNMPv2-CONF        -- [RFC2580]
+     InterfaceIndex, ifIndex
+     FROM IF-MIB             -- [RFC2863]
+     PerfCurrentCount, PerfIntervalCount,
+     PerfTotalCount
+     FROM PerfHist-TC-MIB;   -- [RFC3593]
+
+ds1 MODULE-IDENTITY
+    LAST-UPDATED "200703050000Z"
+    ORGANIZATION "IETF AToM MIB Working Group"
+
+    CONTACT-INFO
+      "WG charter:
+       http://www.ietf.org/html.charters/atommib-charter.html
+
+       Mailing Lists:
+         General Discussion: atommib@research.telcordia.com
+         To Subscribe: atommib-request@research.telcordia.com
+
+       Editor: Orly Nicklass
+
+       Postal: RAD Data Communications, Ltd.
+               Ziv Tower, 24 Roul Walenberg
+               Tel Aviv, Israel, 69719
+
+               Tel: +9723 765 9969
+       E-mail: orly_n@rad.com"
+    DESCRIPTION
+         "The MIB module to describe DS1, J1, E1, DS2, and
+          E2 interfaces objects.
+
+          Copyright (c) The IETF Trust (2007).  This
+          version of this MIB module is part of RFC 4805;
+          see the RFC itself for full legal notices."
+    REVISION "200703050000Z"
+    DESCRIPTION
+         "The following changes were made:
+          (1) Values were added to dsx1LineType to
+              support J1 types.
+          (2) The object dsx1LineImpedance was added.
+          (3) All DM-related objects were deprecated
+              following their removal from ITU performance
+              standards.
+         The RFC 4805 version of this MIB module."
+    REVISION "200409090000Z"
+    DESCRIPTION
+         "The RFC 3895 version of this MIB module.
+          The key changes made to this MIB module
+          since its publication in RFC 2495 are as follows:
+     (1) The dsx1FracIfIndex SYNTAX matches the description
+         range.
+     (2) A value was added to dsx1TransmitClockSource.
+     (3) Values were added to dsx1LineType.
+     (4) Two objects were added, dsx1LineMode and
+         dsx1LineBuildOut, to better express transceiver
+         mode and LineBuildOut for T1.
+     (5) Reference was added to Circuit Identifier object.
+
+     (6) Align the DESCRIPTION clauses of few statistic
+         objects with the near-end definition, with the far-end
+         definition, and with RFC 3593.
+     (7) Changes in Compliance Statements to include new
+         objects.
+     (8) A typographical error in dsx2E2 was fixed; the new name
+         is dsx1E2."
+
+    REVISION "199808011830Z"
+    DESCRIPTION
+         "The RFC 2495 version of this MIB module.
+          The key changes made to this MIB module
+          since its publication in RFC 1406 are as follows:
+     (1)  The Fractional table has been deprecated.
+     (2)  This document uses SMIv2.
+     (3)  Usage is given for ifTable and ifXTable.
+     (4)  Example usage of ifStackTable is included.
+     (5)  dsx1IfIndex has been deprecated.
+     (6)  Support for DS2 and E2 has been added.
+     (7)  Additional lineTypes for DS2, E2, and unframed E1
+          were added.
+     (8)  The definition of valid intervals has been clarified
+          for the case where the agent proxied for other
+          devices.  In particular, the treatment of missing
+          intervals has been clarified.
+     (9)  An inward loopback has been added.
+     (10) Additional lineStatus bits have been added for Near
+          End in Unavailable Signal State, Carrier Equipment
+          Out of Service, DS2 Payload AIS, and DS2 Performance
+          Threshold.
+     (11) A read-write line Length object has been added.
+     (12) Signal mode of other has been added.
+     (13) Added a lineStatus last change, trap and enabler.
+     (14) The e1(19) ifType has been obsoleted, so this MIB
+          does not list it as a supported ifType.
+     (15) Textual Conventions for statistics objects have
+          been used.
+     (16) A new object, dsx1LoopbackStatus, has been
+          introduced to reflect the loopbacks established
+          on a DS1 interface and the source to the requests.
+          dsx1LoopbackConfig continues to be the desired
+          loopback state while dsx1LoopbackStatus reflects
+          the actual state.
+     (17) A dual loopback has been added to allow the setting
+          of an inward loopback and a line loopback at the
+          same time.
+     (18) An object indicating which channel to use within a
+          parent object (i.e., DS3) has been added.
+
+     (19) An object has been added to indicate whether or
+          not this DS1/E1 is channelized.
+     (20) Line coding type of B6ZS has been added for DS2."
+
+    REVISION "199301252028Z"
+    DESCRIPTION
+         "Initial version, published as RFC 1406."
+    ::= { transmission 18 }
+
+-- note that this subsumes cept(19) and g703at2mb(67)
+-- there is no separate CEPT or G703AT2MB MIB
+-- The DS1 Near End Group
+
+-- The DS1 Near End Group consists of five tables:
+--    DS1 Configuration
+--    DS1 Current
+--    DS1 Interval
+--    DS1 Total
+--    DS1 Channel Table
+
+-- The DS1 Configuration Table
+
+dsx1ConfigTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1ConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Configuration table."
+     ::= { ds1 6 }
+
+dsx1ConfigEntry OBJECT-TYPE
+     SYNTAX  Dsx1ConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Configuration table."
+     INDEX   { dsx1LineIndex }
+     ::= { dsx1ConfigTable 1 }
+
+Dsx1ConfigEntry ::=
+     SEQUENCE {
+           dsx1LineIndex                    InterfaceIndex,
+           dsx1IfIndex                      InterfaceIndex,
+           dsx1TimeElapsed                  INTEGER,
+           dsx1ValidIntervals               INTEGER,
+           dsx1LineType                     INTEGER,
+           dsx1LineCoding                   INTEGER,
+           dsx1SendCode                     INTEGER,
+           dsx1CircuitIdentifier            DisplayString,
+           dsx1LoopbackConfig               INTEGER,
+           dsx1LineStatus                   INTEGER,
+           dsx1SignalMode                   INTEGER,
+           dsx1TransmitClockSource          INTEGER,
+           dsx1Fdl                          INTEGER,
+           dsx1InvalidIntervals             INTEGER,
+           dsx1LineLength                   INTEGER,
+           dsx1LineStatusLastChange         TimeStamp,
+           dsx1LineStatusChangeTrapEnable   INTEGER,
+           dsx1LoopbackStatus               INTEGER,
+           dsx1Ds1ChannelNumber             INTEGER,
+           dsx1Channelization               INTEGER,
+           dsx1LineMode                     INTEGER,
+           dsx1LineBuildOut                 INTEGER,
+           dsx1LineImpedance                INTEGER
+}
+
+dsx1LineIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "This object should be made equal to ifIndex.  The
+            next paragraph describes its previous usage.
+            Making the object equal to ifIndex allows proper
+            use of the ifStackTable and ds0/ds0bundle MIBs.
+
+            Previously, this object was the identifier of a DS1
+            interface on a managed device.  If there is an
+            ifEntry that is directly associated with this and
+            only this DS1 interface, it should have the same
+            value as ifIndex.  Otherwise, number the
+            dsx1LineIndices with a unique identifier
+            following the rules of choosing a number that is
+            greater than ifNumber and numbering the inside
+            interfaces (e.g., equipment side) with even
+            numbers and outside interfaces (e.g., network
+            side) with odd numbers."
+     ::= { dsx1ConfigEntry 1 }
+
+dsx1IfIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only
+     STATUS  deprecated
+     DESCRIPTION
+            "This value for this object is equal to the value
+
+            of ifIndex from the Interfaces table (RFC 2863)."
+     ::= { dsx1ConfigEntry 2 }
+
+dsx1TimeElapsed OBJECT-TYPE
+     SYNTAX  INTEGER (0..899)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of seconds that have elapsed since the
+            beginning of the near-end current error-
+            measurement period.  If, for some reason, such as
+            an adjustment in the system's time-of-day clock,
+            the current interval exceeds the maximum value,
+            the agent will return the maximum value."
+     ::= { dsx1ConfigEntry 3 }
+
+dsx1ValidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of previous near-end intervals for
+            which data was collected.  The value will be 96
+            unless the interface was brought online within the
+            last 24 hours, in which case the value will be the
+            number of complete 15-minute near-end intervals
+            since the interface has been online.  In the case
+            where the agent is a proxy, it is possible that
+            some intervals are unavailable.  In this case,
+            this interval is the maximum interval number for
+            which data is available."
+     ::= { dsx1ConfigEntry 4 }
+
+dsx1LineType OBJECT-TYPE
+     SYNTAX INTEGER {
+               other(1),
+               dsx1ESF(2),
+               dsx1D4(3),
+               dsx1E1(4),
+               dsx1E1CRC(5),
+               dsx1E1MF(6),
+               dsx1E1CRCMF(7),
+               dsx1Unframed(8),
+               dsx1E1Unframed(9),
+               dsx1DS2M12(10),
+               dsx1E2(11),
+               dsx1E1Q50(12),
+               dsx1E1Q50CRC(13),
+               dsx1J1ESF(14),
+               dsx1J1Unframed(16)
+                               }
+     MAX-ACCESS read-write
+     STATUS current
+     DESCRIPTION
+            "This variable indicates the variety of DS1
+            Line implementing this circuit.  The type of
+            circuit affects the number of bits per second
+            that the circuit can reasonably carry, as well
+            as the interpretation of the usage and error
+            statistics.  The values, in sequence, describe:
+
+                  TITLE:          SPECIFICATION:
+                  dsx1ESF         Extended SuperFrame DS1
+                                         (T1.107)
+                  dsx1D4          AT&T D4 format DS1 (T1.107)
+                  dsx1E1          ITU-T G.704, (Table 5A)
+                  dsx1E1-CRC      ITU-T G.704, (Table 5B)
+                  dsxE1-MF        G.704 (Table 5A) with TS16
+                                         multiframing enabled
+                  dsx1E1-CRC-MF   G.704 (Table 5B) with TS16
+                                         multiframing enabled
+                  dsx1Unframed    DS1 with No Framing
+                  dsx1E1Unframed  E1 with No Framing (G.703)
+                  dsx1DS2M12      DS2 frame format (T1.107)
+                  dsx1E2          E2 frame format (G.704)
+                  dsx1E1Q50       TS16 bits 5,7,8 set to 101,
+                                  [in all other cases it is set
+                                  to 111.] (G.704, table 14)
+                  dsx1E1Q50CRC    E1Q50 with CRC
+                  dsx1J1ESF       J1 according to (JT-G704,
+                                         JT-G706, and JT-I431)
+                  dsx1J1Unframed  J1 with No Framing
+
+            For clarification, the capacity for each E1 type
+            is as listed below:
+            dsx1E1Unframed - E1, no framing = 32 x 64k = 2048k
+            dsx1E1 or dsx1E1CRC - E1, with framing,
+            no signalling = 31 x 64k = 1984k
+            dsx1E1MF or dsx1E1CRCMF - E1, with framing,
+            signalling = 30 x 64k = 1920k"
+     REFERENCE
+       "American National Standard for
+             telecommunications -
+             digital hierarchy - formats specification,
+             ANSI T1.107- 1988.
+        ITU-T G.703: Physical/Electrical Characteristics
+
+             of Hierarchical Digital Interfaces, November
+             2001.
+        ITU-T G.704: Synchronous frame structures used at
+             1544, 6312, 2048, 8488 and 44 736 kbit/s
+             Hierarchical Levels, July 1995.
+        JT-G704: Synchronous frame structures used at
+             Primary and Secondary Hierarchical Levels,2002.
+        JT-G706. Frame Alignment and Cyclic Redundancy
+             Check (CRC) Procedures.
+        JT-I431. ISDN Primary Rate User-Network Interface,
+             Layer 1 Specifications, 2002 "
+::= { dsx1ConfigEntry 5 }
+
+dsx1LineCoding OBJECT-TYPE
+     SYNTAX  INTEGER {
+                dsx1JBZS(1),
+                dsx1B8ZS(2),
+                dsx1HDB3(3),
+                dsx1ZBTSI(4),
+                dsx1AMI(5),
+                other(6),
+                dsx1B6ZS(7)
+            }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable describes the variety of Zero Code
+            Suppression used on this interface, which in turn
+            affects a number of its characteristics.
+
+            dsx1JBZS refers the Jammed Bit Zero Suppression,
+            in which the AT&T specification of at least one
+            pulse every 8-bit period is literally implemented
+            by forcing a pulse in bit 8 of each channel.
+            Thus, only 7 bits per channel, or 1.344 Mbps,
+            are available for data.
+
+            dsx1B8ZS refers to the use of a specified pattern
+            of normal bits and bipolar violations that are
+            used to replace a sequence of 8 zero bits.
+            ANSI Clear Channels may use dsx1ZBTSI, or Zero
+            Byte Time Slot Interchange.
+
+            E1 links, with or without CRC, use dsx1HDB3 or
+            dsx1AMI.
+
+            dsx1AMI refers to a mode wherein no Zero Code
+            Suppression is present and the line encoding does
+
+            not solve the problem directly.  In this
+            application, the higher layer must provide data
+            that meets or exceeds the pulse density
+            requirements, such as inverting HDLC data.
+
+            dsx1B6ZS refers to the user of a specified pattern
+            of normal bits and bipolar violations that are
+            used to replace a sequence of 6 zero bits.  Used
+            for DS2.
+            For more information about line coding see
+            [ANSI-T1.102]"
+     ::= { dsx1ConfigEntry 6 }
+
+dsx1SendCode OBJECT-TYPE
+     SYNTAX  INTEGER {
+               dsx1SendNoCode(1),
+               dsx1SendLineCode(2),
+               dsx1SendPayloadCode(3),
+               dsx1SendResetCode(4),
+               dsx1SendQRS(5),
+               dsx1Send511Pattern(6),
+               dsx1Send3in24Pattern(7),
+               dsx1SendOtherTestPattern(8)
+               }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable indicates what type of code is
+            being sent across the DS1 interface by the device.
+            Setting this variable causes the interface to send
+            the code requested.  The values mean the following:
+
+      dsx1SendNoCode
+           sending looped or normal data
+
+      dsx1SendLineCode
+           sending a request for a line loopback
+
+      dsx1SendPayloadCode
+           sending a request for a payload loopback
+
+      dsx1SendResetCode
+           sending a loopback termination request
+
+      dsx1SendQRS
+           sending a Quasi-Random Signal (QRS) test
+           pattern
+
+      dsx1Send511Pattern
+           sending a 511-bit fixed test pattern
+
+      dsx1Send3in24Pattern
+           sending a fixed test pattern of 3 bits set
+           in 24
+
+      dsx1SendOtherTestPattern
+           sending a test pattern other than those
+           described by this object"
+     ::= { dsx1ConfigEntry 7 }
+
+dsx1CircuitIdentifier OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..255))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable contains the transmission vendor's
+            circuit identifier, for the purpose of
+            facilitating troubleshooting."
+     REFERENCE "ITU-T M.1400"
+     ::= { dsx1ConfigEntry 8 }
+
+dsx1LoopbackConfig OBJECT-TYPE
+     SYNTAX  INTEGER {
+                 dsx1NoLoop(1),
+                 dsx1PayloadLoop(2),
+                 dsx1LineLoop(3),
+                 dsx1OtherLoop(4),
+                 dsx1InwardLoop(5),
+                 dsx1DualLoop(6)
+               }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable represents the desired loopback
+            configuration of the DS1 interface.  Agents
+            supporting read/write access should return
+            inconsistentValue in response to a requested
+            loopback state that the interface does not
+            support.  The values mean:
+
+      dsx1NoLoop
+            not in the loopback state.  A device that is not
+            capable of performing a loopback on the interface
+            shall always return this as its value.
+
+      dsx1PayloadLoop
+
+            the received signal at this interface is looped
+            through the device.  Typically, the received signal
+            is looped back for retransmission after it has
+            passed through the device's framing function.
+
+      dsx1LineLoop
+            the received signal at this interface does not go
+            through the device (minimum penetration) but is
+            looped back out.
+
+      dsx1OtherLoop
+            loopbacks that are not defined here.
+
+      dsx1InwardLoop
+            the transmitted signal at this interface is
+            looped back and received by the same interface.
+            What is transmitted onto the line is product
+            dependent.
+
+      dsx1DualLoop
+            both dsx1LineLoop and dsx1InwardLoop will be
+            active simultaneously."
+     ::= { dsx1ConfigEntry 9 }
+
+dsx1LineStatus OBJECT-TYPE
+     SYNTAX  INTEGER (1..131071)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "This variable indicates the line status of the
+            interface.  It contains loopback, failure,
+            received alarm and transmitted alarms
+            information.
+
+            The dsx1LineStatus is a bitmap represented as a
+            sum; therefore, it can represent multiple failures
+            (alarms) and a LoopbackState simultaneously.
+
+            dsx1NoAlarm must be set if and only if no other
+            flag is set.
+
+            If the dsx1loopbackState bit is set, the loopback
+            in effect can be determined from the
+            dsx1loopbackConfig object.  The various bit
+            positions are as follows:
+
+      1     dsx1NoAlarm           No alarm present
+      2     dsx1RcvFarEndLOF      Far end LOF (a.k.a.
+
+                                  Yellow Alarm)
+      4     dsx1XmtFarEndLOF      Near end sending LOF
+                                  indication
+      8     dsx1RcvAIS            Far end sending AIS
+     16     dsx1XmtAIS            Near end sending AIS
+     32     dsx1LossOfFrame       Near end LOF (a.k.a.
+                                  Red Alarm)
+     64     dsx1LossOfSignal      Near end Loss of Signal
+    128     dsx1LoopbackState     Near end is looped
+    256     dsx1T16AIS            E1 TS16 AIS
+    512     dsx1RcvFarEndLOMF     Far end sending TS16 LOMF
+   1024     dsx1XmtFarEndLOMF     Near end sending TS16 LOMF
+   2048     dsx1RcvTestCode       Near end detects a test code
+   4096     dsx1OtherFailure      Any line status not defined
+                                  here
+   8192     dsx1UnavailSigState   Near end in unavailable
+                                  signal state
+  16384     dsx1NetEquipOOS       Carrier equipment out of
+                                  service
+  32768     dsx1RcvPayloadAIS     DS2 payload AIS
+  65536     dsx1Ds2PerfThreshold  DS2 performance threshold
+                                  exceeded"
+     ::= { dsx1ConfigEntry 10 }
+
+dsx1SignalMode OBJECT-TYPE
+     SYNTAX  INTEGER {
+                none(1),
+                robbedBit(2),
+                bitOriented(3),
+                messageOriented(4),
+                other(5)
+            }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+       "'none' indicates that no bits are reserved for
+       signaling on this channel.
+
+       'robbedBit' indicates that DS1 Robbed Bit Signaling
+       is in use.
+
+       'bitOriented' indicates that E1 Channel Associated
+       Signaling is in use.
+
+       'messageOriented' indicates that Common Channel
+       Signaling is in use on either channel 16 of
+       an E1 link or channel 24 of a DS1."
+     ::= { dsx1ConfigEntry 11 }
+
+dsx1TransmitClockSource OBJECT-TYPE
+     SYNTAX  INTEGER {
+                loopTiming(1),
+                localTiming(2),
+                throughTiming(3),
+                adaptive (4)
+            }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+       "The source of transmit clock.
+
+        'loopTiming' indicates that the recovered
+        receive clock is used as the transmit clock.
+
+        'localTiming' indicates that a local clock
+       source is used or when an external clock is
+       attached to the box containing the interface.
+
+        'throughTiming' indicates that recovered
+       receive clock from another interface is used as
+       the transmit clock.
+
+        'adaptive' indicates that the clock is recovered
+       based on the data flow and not based on the
+       physical layer"
+     ::= { dsx1ConfigEntry 12 }
+
+dsx1Fdl OBJECT-TYPE
+     SYNTAX  INTEGER (1..15)
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+       "This bitmap describes the use of the
+       facilities data link and is the sum of the
+       capabilities.  Set any bits that are appropriate:
+
+       other(1),
+       dsx1AnsiT1403(2),
+       dsx1Att54016(4),
+       dsx1FdlNone(8)
+
+        'other' indicates that a protocol other than
+       one of the following is used.
+
+        'dsx1AnsiT1403' refers to the FDL exchange
+       recommended by ANSI.
+
+        'dsx1Att54016' refers to ESF FDL exchanges.
+
+        'dsx1FdlNone' indicates that the device does
+       not use the FDL."
+     ::= { dsx1ConfigEntry 13 }
+
+dsx1InvalidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of intervals in the range from 0 to
+            dsx1ValidIntervals for which no data is available.
+            This object will typically be zero except in cases
+            where the data for some intervals is not
+            available (e.g., in proxy situations)."
+     ::= { dsx1ConfigEntry 14 }
+
+dsx1LineLength OBJECT-TYPE
+     SYNTAX  INTEGER (0..64000)
+     UNITS  "meters"
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "The length of the DS1 line in meters.  This
+            object provides information for line build-out
+            circuitry.  This object is only useful if the
+            interface has configurable line build-out
+            circuitry."
+     ::= { dsx1ConfigEntry 15 }
+
+dsx1LineStatusLastChange OBJECT-TYPE
+     SYNTAX  TimeStamp
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The value of MIB II's sysUpTime object at the
+            time this DS1 entered its current line status
+            state.  If the current state was entered prior to
+            the last re-initialization of the proxy-agent,
+            then this object contains a zero value."
+     ::= { dsx1ConfigEntry 16 }
+
+dsx1LineStatusChangeTrapEnable  OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Indicates whether dsx1LineStatusChange traps
+            should be generated for this interface."
+     DEFVAL { disabled }
+     ::= { dsx1ConfigEntry 17 }
+
+dsx1LoopbackStatus  OBJECT-TYPE
+     SYNTAX      INTEGER (1..127)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+            "This variable represents the current state of the
+            loopback on the DS1 interface.  It contains
+            information about loopbacks established by a
+            manager and remotely from the far end.
+
+            The dsx1LoopbackStatus is a bitmap represented as
+            a sum; therefore, it can represent multiple
+            loopbacks simultaneously.
+
+            The various bit positions are as follows:
+             1  dsx1NoLoopback
+             2  dsx1NearEndPayloadLoopback
+             4  dsx1NearEndLineLoopback
+             8  dsx1NearEndOtherLoopback
+            16  dsx1NearEndInwardLoopback
+            32  dsx1FarEndPayloadLoopback
+            64  dsx1FarEndLineLoopback"
+     ::= { dsx1ConfigEntry 18 }
+
+dsx1Ds1ChannelNumber  OBJECT-TYPE
+     SYNTAX      INTEGER (0..28)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+            "This variable represents the channel number of
+            the DS1/E1 on its parent DS2/E2 or DS3/E3.  A
+            value of 0 indicates that this DS1/E1 does not
+            have a parent DS3/E3."
+     ::= { dsx1ConfigEntry 19 }
+
+dsx1Channelization  OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    disabled(1),
+                    enabledDs0(2),
+                    enabledDs1(3)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Indicates whether this DS1/E1 or DS2 is
+            channelized or unchannelized.
+
+            The value of enabledDs0(2) indicates that this is a
+            DS1 channelized into DS0s.  Setting this value will
+            cause the creation, and resetting it to disabled(1)
+            will cause the deletion of entries in the ifTable
+            for the DS0s that are within the DS1.
+
+            The value of enabledDs1(3) indicates that this is a
+            DS2 channelized into DS1s.  Setting this value will
+            cause the creation, and resetting it to disabled(1)
+            will cause the deletion of entries in the ifTable
+            for the DS1s that are within the DS2."
+     ::= { dsx1ConfigEntry 20 }
+
+dsx1LineMode  OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    csu(1),
+                    dsu(2)
+                  }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "This setting puts the T1 framer into either
+            long-haul (CSU) mode or short-haul (DSU) mode."
+     ::= { dsx1ConfigEntry 21 }
+
+dsx1LineBuildOut  OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    notApplicable(1),
+                    neg75dB(2),
+                    neg15dB(3),
+                    neg225dB(4),
+                    zerodB(5)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Attenuation setting for T1 framer in long haul
+            (CSU) mode.  The optional values are -7.5dB,
+            -15dB, -22.5dB, and 0dB."
+     ::= { dsx1ConfigEntry 22 }
+
+dsx1LineImpedance   OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    notApplicable(1),
+                    unbalanced75ohms(2),
+                    balanced100ohms(3),
+                    balanced120ohms(4)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Nominal line impedance.  For T1 and J1 lines, the
+            value is typically balanced100ohms(3).  For E1
+            lines, the value is typically unbalanced75ohms(2)
+            and balanced120ohms(4).  When this object does not
+            apply, or when the appropriate value is not known,
+            the value should be set to notApplicable(1)."
+     ::= { dsx1ConfigEntry 23 }
+
+-- The DS1 Current Table
+dsx1CurrentTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1CurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Current table contains various statistics
+            being collected for the current 15-minute
+            interval."
+     ::= { ds1 7 }
+
+dsx1CurrentEntry OBJECT-TYPE
+     SYNTAX  Dsx1CurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Current table."
+     INDEX   { dsx1CurrentIndex }
+     ::= { dsx1CurrentTable 1 }
+
+Dsx1CurrentEntry ::=
+     SEQUENCE {
+         dsx1CurrentIndex            InterfaceIndex,
+         dsx1CurrentESs              PerfCurrentCount,
+         dsx1CurrentSESs             PerfCurrentCount,
+         dsx1CurrentSEFSs            PerfCurrentCount,
+         dsx1CurrentUASs             PerfCurrentCount,
+         dsx1CurrentCSSs             PerfCurrentCount,
+         dsx1CurrentPCVs             PerfCurrentCount,
+         dsx1CurrentLESs             PerfCurrentCount,
+         dsx1CurrentBESs             PerfCurrentCount,
+         dsx1CurrentDMs              PerfCurrentCount,
+         dsx1CurrentLCVs             PerfCurrentCount
+}
+
+dsx1CurrentIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value that uniquely identifies the DS1
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is the same interface as identified by the
+            same value as a dsx1LineIndex object instance."
+     ::= { dsx1CurrentEntry 1 }
+
+dsx1CurrentESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Errored Seconds."
+     ::= { dsx1CurrentEntry 2 }
+
+dsx1CurrentSESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Severely Errored Seconds."
+     ::= { dsx1CurrentEntry 3 }
+
+dsx1CurrentSEFSs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Severely Errored Framing Seconds."
+     ::= { dsx1CurrentEntry 4 }
+
+dsx1CurrentUASs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Unavailable Seconds."
+     ::= { dsx1CurrentEntry 5 }
+
+dsx1CurrentCSSs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Controlled Slip Seconds."
+     ::= { dsx1CurrentEntry 6 }
+
+dsx1CurrentPCVs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Path Coding Violations."
+     ::= { dsx1CurrentEntry 7 }
+
+dsx1CurrentLESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Line Errored Seconds."
+     ::= { dsx1CurrentEntry 8 }
+
+dsx1CurrentBESs OBJECT-TYPE
+     SYNTAX PerfCurrentCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Bursty Errored Seconds."
+     ::= { dsx1CurrentEntry 9 }
+
+dsx1CurrentDMs OBJECT-TYPE
+     SYNTAX PerfCurrentCount
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of Degraded Minutes."
+     ::= { dsx1CurrentEntry 10 }
+
+dsx1CurrentLCVs OBJECT-TYPE
+     SYNTAX PerfCurrentCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Line Coding Violations (LCVs)."
+     ::= { dsx1CurrentEntry 11 }
+
+-- The DS1 Interval Table
+dsx1IntervalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1IntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Interval table contains various
+            statistics collected by each DS1 interface over
+            the previous 24 hours of operation.  The past 24
+            hours are broken into 96 completed 15-minute
+            intervals.  Each row in this table represents one
+            such interval (identified by dsx1IntervalNumber)
+            for one specific instance (identified by
+            dsx1IntervalIndex)."
+     ::= { ds1 8 }
+
+dsx1IntervalEntry OBJECT-TYPE
+     SYNTAX  Dsx1IntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Interval table."
+     INDEX   { dsx1IntervalIndex, dsx1IntervalNumber }
+     ::= { dsx1IntervalTable 1 }
+
+Dsx1IntervalEntry ::=
+     SEQUENCE {
+         dsx1IntervalIndex             InterfaceIndex,
+         dsx1IntervalNumber            INTEGER,
+         dsx1IntervalESs               PerfIntervalCount,
+         dsx1IntervalSESs              PerfIntervalCount,
+         dsx1IntervalSEFSs             PerfIntervalCount,
+         dsx1IntervalUASs              PerfIntervalCount,
+         dsx1IntervalCSSs              PerfIntervalCount,
+         dsx1IntervalPCVs              PerfIntervalCount,
+         dsx1IntervalLESs              PerfIntervalCount,
+         dsx1IntervalBESs              PerfIntervalCount,
+         dsx1IntervalDMs               PerfIntervalCount,
+         dsx1IntervalLCVs              PerfIntervalCount,
+         dsx1IntervalValidData         TruthValue
+}
+
+dsx1IntervalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value that uniquely identifies the DS1
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is the same interface as identified by the
+            same value as a dsx1LineIndex object instance."
+     ::= { dsx1IntervalEntry 1 }
+
+dsx1IntervalNumber OBJECT-TYPE
+     SYNTAX  INTEGER (1..96)
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "A number between 1 and 96, where 1 is the most
+            recently completed 15-minute interval and 96 is
+            the 15-minute interval completed 23 hours and 45
+            minutes prior to interval 1."
+     ::= { dsx1IntervalEntry 2 }
+
+dsx1IntervalESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Errored Seconds."
+     ::= { dsx1IntervalEntry 3 }
+
+dsx1IntervalSESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Severely Errored Seconds."
+     ::= { dsx1IntervalEntry 4 }
+
+dsx1IntervalSEFSs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Severely Errored Framing Seconds."
+     ::= { dsx1IntervalEntry 5 }
+
+dsx1IntervalUASs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Unavailable Seconds.  This object
+            may decrease if the occurrence of unavailable
+            seconds occurs across an interval boundary."
+     ::= { dsx1IntervalEntry 6 }
+
+dsx1IntervalCSSs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Controlled Slip Seconds."
+     ::= { dsx1IntervalEntry 7 }
+
+dsx1IntervalPCVs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Path Coding Violations."
+     ::= { dsx1IntervalEntry 8 }
+
+dsx1IntervalLESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Line Errored Seconds."
+     ::= { dsx1IntervalEntry 9 }
+
+dsx1IntervalBESs OBJECT-TYPE
+     SYNTAX PerfIntervalCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Bursty Errored Seconds."
+     ::= { dsx1IntervalEntry 10 }
+
+dsx1IntervalDMs OBJECT-TYPE
+     SYNTAX PerfIntervalCount
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of Degraded Minutes."
+     ::= { dsx1IntervalEntry 11 }
+
+dsx1IntervalLCVs OBJECT-TYPE
+     SYNTAX PerfIntervalCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Line Coding Violations."
+     ::= { dsx1IntervalEntry 12 }
+
+dsx1IntervalValidData OBJECT-TYPE
+     SYNTAX TruthValue
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "This variable indicates whether the data for this
+            interval is valid."
+     ::= { dsx1IntervalEntry 13 }
+
+-- The DS1 Total Table
+dsx1TotalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1TotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Total table contains the cumulative sum
+            of the various statistics for the 24-hour period
+            preceding the current interval."
+     ::= { ds1 9 }
+
+dsx1TotalEntry OBJECT-TYPE
+     SYNTAX  Dsx1TotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Total table."
+     INDEX   { dsx1TotalIndex }
+     ::= { dsx1TotalTable 1 }
+
+Dsx1TotalEntry ::=
+     SEQUENCE {
+         dsx1TotalIndex                InterfaceIndex,
+         dsx1TotalESs                  PerfTotalCount,
+         dsx1TotalSESs                 PerfTotalCount,
+         dsx1TotalSEFSs                PerfTotalCount,
+         dsx1TotalUASs                 PerfTotalCount,
+         dsx1TotalCSSs                 PerfTotalCount,
+         dsx1TotalPCVs                 PerfTotalCount,
+         dsx1TotalLESs                 PerfTotalCount,
+         dsx1TotalBESs                 PerfTotalCount,
+         dsx1TotalDMs                  PerfTotalCount,
+         dsx1TotalLCVs                 PerfTotalCount
+}
+
+dsx1TotalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value that uniquely identifies the DS1
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is the same interface as identified by the
+            same value as a dsx1LineIndex object instance."
+     ::= { dsx1TotalEntry 1 }
+
+dsx1TotalESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Errored Seconds encountered by a DS1
+            interface in the previous 24-hour interval.
+            Invalid 15-minute intervals count as 0."
+     ::= { dsx1TotalEntry 2 }
+
+dsx1TotalSESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Severely Errored Seconds
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1TotalEntry 3 }
+
+dsx1TotalSEFSs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Severely Errored Framing Seconds
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1TotalEntry 4 }
+
+dsx1TotalUASs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Unavailable Seconds encountered by
+            a DS1 interface in the previous 24-hour interval.
+            Invalid 15-minute intervals count as 0."
+     ::= { dsx1TotalEntry 5 }
+
+dsx1TotalCSSs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Controlled Slip Seconds encountered
+            by a DS1 interface in the previous 24-hour
+            interval.  Invalid 15-minute intervals count as
+            0."
+     ::= { dsx1TotalEntry 6 }
+
+dsx1TotalPCVs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Path Coding Violations encountered
+            by a DS1 interface in the previous 24-hour
+            interval.  Invalid 15-minute intervals count as
+            0."
+     ::= { dsx1TotalEntry 7 }
+
+dsx1TotalLESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Line Errored Seconds encountered by
+            a DS1 interface in the previous 24-hour interval.
+            Invalid 15-minute intervals count as 0."
+     ::= { dsx1TotalEntry 8 }
+
+dsx1TotalBESs OBJECT-TYPE
+     SYNTAX PerfTotalCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Bursty Errored Seconds (BESs)
+
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals count
+            as 0."
+     ::= { dsx1TotalEntry 9 }
+
+dsx1TotalDMs OBJECT-TYPE
+     SYNTAX PerfTotalCount
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of Degraded Minutes (DMs) encountered
+            by a DS1 interface in the previous 24-hour
+            interval.  Invalid 15-minute intervals count as
+            0."
+     ::= { dsx1TotalEntry 10 }
+
+dsx1TotalLCVs OBJECT-TYPE
+     SYNTAX PerfTotalCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Line Coding Violations (LCVs)
+            encountered by a DS1 interface in the current
+            15-minute interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1TotalEntry 11 }
+
+-- The DS1 Channel Table
+
+dsx1ChanMappingTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1ChanMappingEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Channel Mapping table.  This table maps a
+            DS1 channel number on a particular DS3 into an
+            ifIndex.  In the presence of DS2s, this table can
+            be used to map a DS2 channel number on a DS3 into
+            an ifIndex, or used to map a DS1 channel number on
+            a DS2 into an ifIndex."
+     ::= { ds1 16 }
+
+dsx1ChanMappingEntry OBJECT-TYPE
+     SYNTAX  Dsx1ChanMappingEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Channel Mapping table.  There
+
+            is an entry in this table corresponding to each
+            DS1 ifEntry within any interface that is
+            channelized to the individual DS1 ifEntry level.
+
+            This table is intended to facilitate mapping from
+            channelized interface / channel number to DS1
+            ifEntry (e.g., mapping (DS3 ifIndex, DS1 channel
+            number) -> ifIndex).
+
+            While this table provides information that can
+            also be found in the ifStackTable and
+            dsx1ConfigTable, it provides this same information
+            with a single table lookup, rather than by walking
+            the ifStackTable to find the various constituent
+            DS1 ifTable entries, and testing various
+            dsx1ConfigTable entries to check for the entry
+            with the applicable DS1 channel number."
+     INDEX   { ifIndex, dsx1Ds1ChannelNumber }
+     ::= { dsx1ChanMappingTable 1 }
+
+Dsx1ChanMappingEntry ::=
+     SEQUENCE {
+         dsx1ChanMappedIfIndex  InterfaceIndex
+}
+
+dsx1ChanMappedIfIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "This object indicates the ifIndex value assigned
+            by the agent for the individual DS1 ifEntry that
+            corresponds to the given DS1 channel number
+            (specified by the INDEX element
+            dsx1Ds1ChannelNumber) of the given channelized
+            interface (specified by INDEX element ifIndex)."
+     ::= { dsx1ChanMappingEntry 1 }
+
+-- The DS1 Far End Current Table
+
+dsx1FarEndCurrentTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1FarEndCurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Far End Current table contains various
+            statistics being collected for the current
+            15-minute interval.  The statistics are collected
+
+            from the far-end messages on the Facilities Data
+            Link.  The definitions are the same as described
+            for the near-end information."
+     ::= { ds1 10 }
+
+dsx1FarEndCurrentEntry OBJECT-TYPE
+     SYNTAX  Dsx1FarEndCurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Far End Current table."
+     INDEX   { dsx1FarEndCurrentIndex }
+     ::= { dsx1FarEndCurrentTable 1 }
+
+Dsx1FarEndCurrentEntry ::=
+     SEQUENCE {
+         dsx1FarEndCurrentIndex      InterfaceIndex,
+         dsx1FarEndTimeElapsed       INTEGER,
+         dsx1FarEndValidIntervals    INTEGER,
+         dsx1FarEndCurrentESs        PerfCurrentCount,
+         dsx1FarEndCurrentSESs       PerfCurrentCount,
+         dsx1FarEndCurrentSEFSs      PerfCurrentCount,
+         dsx1FarEndCurrentUASs       PerfCurrentCount,
+         dsx1FarEndCurrentCSSs       PerfCurrentCount,
+         dsx1FarEndCurrentLESs       PerfCurrentCount,
+         dsx1FarEndCurrentPCVs       PerfCurrentCount,
+         dsx1FarEndCurrentBESs       PerfCurrentCount,
+         dsx1FarEndCurrentDMs        PerfCurrentCount,
+         dsx1FarEndInvalidIntervals  INTEGER
+}
+
+dsx1FarEndCurrentIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value that uniquely identifies the DS1
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is identical to the interface identified by
+            the same value of dsx1LineIndex."
+     ::= { dsx1FarEndCurrentEntry 1 }
+
+dsx1FarEndTimeElapsed OBJECT-TYPE
+     SYNTAX  INTEGER (0..899)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of seconds that have elapsed since the
+            beginning of the far-end current error-measurement
+            period.  If, for some reason, such as an adjustment
+            in the system's time-of-day clock, the current
+            interval exceeds the maximum value, the agent will
+            return the maximum value."
+     ::= { dsx1FarEndCurrentEntry 2 }
+
+dsx1FarEndValidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of previous far-end intervals for
+            which data was collected.  The value will be 96
+            unless the interface was brought online within the
+            last 24 hours, in which case the value will be the
+            number of complete 15-minute far-end intervals
+            since the interface has been online.  In the case
+            where the agent is a proxy, it is possible that
+            some intervals are unavailable.  In this case,
+            this interval is the maximum interval number for
+            which data is available."
+     ::= { dsx1FarEndCurrentEntry 3 }
+
+dsx1FarEndCurrentESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Errored Seconds."
+     ::= { dsx1FarEndCurrentEntry 4 }
+
+dsx1FarEndCurrentSESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Severely Errored Seconds."
+     ::= { dsx1FarEndCurrentEntry 5 }
+
+dsx1FarEndCurrentSEFSs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Severely Errored Framing
+
+            Seconds."
+     ::= { dsx1FarEndCurrentEntry 6 }
+
+dsx1FarEndCurrentUASs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Unavailable Seconds."
+     ::= { dsx1FarEndCurrentEntry 7 }
+
+dsx1FarEndCurrentCSSs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Controlled Slip Seconds."
+     ::= { dsx1FarEndCurrentEntry 8 }
+
+dsx1FarEndCurrentLESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Line Errored Seconds."
+     ::= { dsx1FarEndCurrentEntry 9 }
+
+dsx1FarEndCurrentPCVs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Path Coding Violations."
+     ::= { dsx1FarEndCurrentEntry 10 }
+
+dsx1FarEndCurrentBESs OBJECT-TYPE
+     SYNTAX PerfCurrentCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Far End Bursty Errored Seconds."
+     ::= { dsx1FarEndCurrentEntry 11 }
+
+dsx1FarEndCurrentDMs OBJECT-TYPE
+     SYNTAX PerfCurrentCount
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of Far End Degraded Minutes."
+     ::= { dsx1FarEndCurrentEntry 12 }
+
+dsx1FarEndInvalidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of intervals in the range from 0 to
+            dsx1FarEndValidIntervals for which no data is
+            available.  This object will typically be zero
+            except in cases where the data for some intervals
+            is not available (e.g., in proxy situations)."
+     ::= { dsx1FarEndCurrentEntry 13 }
+
+-- The DS1 Far End Interval Table
+
+dsx1FarEndIntervalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1FarEndIntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Far End Interval table contains various
+            statistics collected by each DS1 interface over
+            the previous 24 hours of operation.  The past 24
+            hours are broken into 96 completed 15-minute
+            intervals.  Each row in this table represents one
+            such interval (identified by
+            dsx1FarEndIntervalNumber) for one specific
+            instance (identified by dsx1FarEndIntervalIndex)."
+     ::= { ds1 11 }
+
+dsx1FarEndIntervalEntry OBJECT-TYPE
+     SYNTAX  Dsx1FarEndIntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Far End Interval table."
+     INDEX   { dsx1FarEndIntervalIndex,
+               dsx1FarEndIntervalNumber }
+     ::= { dsx1FarEndIntervalTable 1 }
+
+Dsx1FarEndIntervalEntry ::=
+     SEQUENCE {
+         dsx1FarEndIntervalIndex       InterfaceIndex,
+         dsx1FarEndIntervalNumber      INTEGER,
+         dsx1FarEndIntervalESs         PerfIntervalCount,
+         dsx1FarEndIntervalSESs        PerfIntervalCount,
+         dsx1FarEndIntervalSEFSs       PerfIntervalCount,
+         dsx1FarEndIntervalUASs        PerfIntervalCount,
+         dsx1FarEndIntervalCSSs        PerfIntervalCount,
+         dsx1FarEndIntervalLESs        PerfIntervalCount,
+         dsx1FarEndIntervalPCVs        PerfIntervalCount,
+         dsx1FarEndIntervalBESs        PerfIntervalCount,
+         dsx1FarEndIntervalDMs         PerfIntervalCount,
+         dsx1FarEndIntervalValidData   TruthValue
+}
+
+dsx1FarEndIntervalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value that uniquely identifies the DS1
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is identical to the interface identified by
+            the same value of dsx1LineIndex."
+     ::= { dsx1FarEndIntervalEntry 1 }
+
+dsx1FarEndIntervalNumber OBJECT-TYPE
+     SYNTAX  INTEGER (1..96)
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "A number between 1 and 96, where 1 is the most
+            recently completed 15-minute interval and 96 is
+            the 15 minutes interval completed 23 hours and 45
+            minutes prior to interval 1."
+     ::= { dsx1FarEndIntervalEntry 2 }
+
+dsx1FarEndIntervalESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Errored Seconds."
+     ::= { dsx1FarEndIntervalEntry 3 }
+
+dsx1FarEndIntervalSESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Severely Errored Seconds."
+     ::= { dsx1FarEndIntervalEntry 4 }
+
+dsx1FarEndIntervalSEFSs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Severely Errored Framing
+            Seconds."
+     ::= { dsx1FarEndIntervalEntry 5 }
+
+dsx1FarEndIntervalUASs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Unavailable Seconds."
+     ::= { dsx1FarEndIntervalEntry 6 }
+
+dsx1FarEndIntervalCSSs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Controlled Slip Seconds."
+     ::= { dsx1FarEndIntervalEntry 7 }
+
+dsx1FarEndIntervalLESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Line Errored Seconds."
+     ::= { dsx1FarEndIntervalEntry 8 }
+
+dsx1FarEndIntervalPCVs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Path Coding Violations."
+     ::= { dsx1FarEndIntervalEntry 9 }
+
+dsx1FarEndIntervalBESs OBJECT-TYPE
+     SYNTAX PerfIntervalCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Far End Bursty Errored Seconds."
+     ::= { dsx1FarEndIntervalEntry 10 }
+
+dsx1FarEndIntervalDMs OBJECT-TYPE
+     SYNTAX PerfIntervalCount
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of Far End Degraded Minutes."
+     ::= { dsx1FarEndIntervalEntry 11 }
+
+dsx1FarEndIntervalValidData OBJECT-TYPE
+     SYNTAX TruthValue
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            " This variable indicates if the data for this
+            interval is valid."
+     ::= { dsx1FarEndIntervalEntry 12 }
+
+-- The DS1 Far End Total Table
+
+dsx1FarEndTotalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1FarEndTotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS1 Far End Total table contains the
+            cumulative sum of the various statistics for the
+            24-hour period preceding the current interval."
+     ::= { ds1 12 }
+
+dsx1FarEndTotalEntry OBJECT-TYPE
+     SYNTAX  Dsx1FarEndTotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS1 Far End Total table."
+     INDEX   { dsx1FarEndTotalIndex }
+     ::= { dsx1FarEndTotalTable 1 }
+
+Dsx1FarEndTotalEntry ::=
+     SEQUENCE {
+         dsx1FarEndTotalIndex          InterfaceIndex,
+         dsx1FarEndTotalESs            PerfTotalCount,
+         dsx1FarEndTotalSESs           PerfTotalCount,
+         dsx1FarEndTotalSEFSs          PerfTotalCount,
+         dsx1FarEndTotalUASs           PerfTotalCount,
+         dsx1FarEndTotalCSSs           PerfTotalCount,
+         dsx1FarEndTotalLESs           PerfTotalCount,
+         dsx1FarEndTotalPCVs           PerfTotalCount,
+         dsx1FarEndTotalBESs           PerfTotalCount,
+         dsx1FarEndTotalDMs            PerfTotalCount
+}
+
+dsx1FarEndTotalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value that uniquely identifies the DS1
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is identical to the interface identified by
+            the same value of dsx1LineIndex."
+     ::= { dsx1FarEndTotalEntry 1 }
+
+dsx1FarEndTotalESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Errored Seconds encountered
+            by a DS1 interface in the previous 24-hour
+            interval.  Invalid 15-minute intervals count as
+            0."
+     ::= { dsx1FarEndTotalEntry 2 }
+
+dsx1FarEndTotalSESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Severely Errored Seconds
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1FarEndTotalEntry 3 }
+
+dsx1FarEndTotalSEFSs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Severely Errored Framing
+            Seconds encountered by a DS1 interface in the
+            previous 24-hour interval.  Invalid 15-minute
+            intervals count as 0."
+     ::= { dsx1FarEndTotalEntry 4 }
+
+dsx1FarEndTotalUASs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Unavailable Seconds encountered by
+            a DS1 interface in the previous 24-hour interval.
+            Invalid 15-minute intervals count as 0."
+     ::= { dsx1FarEndTotalEntry 5 }
+
+dsx1FarEndTotalCSSs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Controlled Slip Seconds
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15 minute intervals
+            count as 0."
+     ::= { dsx1FarEndTotalEntry 6 }
+
+dsx1FarEndTotalLESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Line Errored Seconds
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1FarEndTotalEntry 7 }
+
+dsx1FarEndTotalPCVs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Far End Path Coding Violations
+            reported via the far end block error count
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1FarEndTotalEntry 8 }
+
+dsx1FarEndTotalBESs OBJECT-TYPE
+     SYNTAX PerfTotalCount
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of Bursty Errored Seconds (BESs)
+            encountered by a DS1 interface in the previous
+            24-hour interval.  Invalid 15-minute intervals
+            count as 0."
+     ::= { dsx1FarEndTotalEntry 9 }
+
+dsx1FarEndTotalDMs OBJECT-TYPE
+     SYNTAX PerfTotalCount
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of Degraded Minutes (DMs) encountered
+            by a DS1 interface in the previous 24-hour
+            interval.  Invalid 15-minute intervals count as
+            0."
+     ::= { dsx1FarEndTotalEntry 10 }
+
+-- The DS1 Fractional Table
+
+dsx1FracTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx1FracEntry
+     MAX-ACCESS  not-accessible
+     STATUS  deprecated
+     DESCRIPTION
+            "This table is deprecated in favor of using
+            ifStackTable.
+
+            The table was mandatory for systems dividing a DS1
+            into channels containing different data streams
+            that are of local interest.  Systems that are
+            indifferent to data content, such as CSUs, need
+            not implement it.
+
+            The DS1 Fractional table identifies which DS1
+            channels associated with a CSU are being used to
+            support a logical interface, i.e., an entry in the
+            interfaces table from the Internet-standard MIB.
+
+            For example, consider an application managing a
+            North American ISDN Primary Rate link whose
+            division is a 384-kbit/s H1 _B_ Channel for video,
+            a second H1 for data to a primary routing peer,
+            and 12 64-kbit/s H0 _B_ Channels.  Consider that
+            some subset of the H0 channels is used for voice
+            and the remainder are available for dynamic data
+            calls.
+
+            We count a total of 14 interfaces multiplexed onto
+            the DS1 interface.  Six DS1 channels (for the sake
+            of the example, channels 1..6) are used for video,
+            six more (7..11 and 13) are used for data, and the
+            remaining 12 are in channels 12 and 14..24.
+
+            Let us further imagine that ifIndex 2 is of type
+            DS1 and refers to the DS1 interface and that the
+            interfaces layered onto it are numbered 3..16.
+
+            We might describe the allocation of channels, in
+            the dsx1FracTable, as follows:
+          dsx1FracIfIndex.2. 1 = 3  dsx1FracIfIndex.2.13 = 4
+          dsx1FracIfIndex.2. 2 = 3  dsx1FracIfIndex.2.14 = 6
+          dsx1FracIfIndex.2. 3 = 3  dsx1FracIfIndex.2.15 = 7
+          dsx1FracIfIndex.2. 4 = 3  dsx1FracIfIndex.2.16 = 8
+          dsx1FracIfIndex.2. 5 = 3  dsx1FracIfIndex.2.17 = 9
+          dsx1FracIfIndex.2. 6 = 3  dsx1FracIfIndex.2.18 = 10
+          dsx1FracIfIndex.2. 7 = 4  dsx1FracIfIndex.2.19 = 11
+          dsx1FracIfIndex.2. 8 = 4  dsx1FracIfIndex.2.20 = 12
+          dsx1FracIfIndex.2. 9 = 4  dsx1FracIfIndex.2.21 = 13
+          dsx1FracIfIndex.2.10 = 4  dsx1FracIfIndex.2.22 = 14
+          dsx1FracIfIndex.2.11 = 4  dsx1FracIfIndex.2.23 = 15
+          dsx1FracIfIndex.2.12 = 5  dsx1FracIfIndex.2.24 = 16
+
+            For North American (DS1) interfaces, there are 24
+            legal channels, numbered 1 through 24.
+
+            For G.704 interfaces, there are 31 legal channels,
+            numbered 1 through 31.  The channels (1..31)
+            correspond directly to the equivalently numbered
+            time-slots."
+     ::= { ds1 13 }
+
+dsx1FracEntry OBJECT-TYPE
+     SYNTAX  Dsx1FracEntry
+     MAX-ACCESS  not-accessible
+     STATUS  deprecated
+     DESCRIPTION
+        "An entry in the DS1 Fractional table."
+    INDEX   { dsx1FracIndex, dsx1FracNumber }
+    ::= { dsx1FracTable 1 }
+
+Dsx1FracEntry ::=
+    SEQUENCE {
+        dsx1FracIndex        INTEGER,
+        dsx1FracNumber       INTEGER,
+        dsx1FracIfIndex      INTEGER
+    }
+
+dsx1FracIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..'7fffffff'h)
+    MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+    STATUS  deprecated
+    DESCRIPTION
+       "The index value that uniquely identifies the
+       DS1 interface to which this entry is applicable.
+       The interface identified by a particular
+       value of this index is the same interface as
+       identified by the same value as a dsx1LineIndex
+       object instance."
+   ::= { dsx1FracEntry 1 }
+
+dsx1FracNumber OBJECT-TYPE
+    SYNTAX  INTEGER (1..31)
+    MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+    STATUS  deprecated
+    DESCRIPTION
+       "The channel number for this entry."
+   ::= { dsx1FracEntry 2 }
+
+dsx1FracIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER (0..'7fffffff'h)
+    MAX-ACCESS  read-write
+    STATUS  deprecated
+    DESCRIPTION
+       "An index value that uniquely identifies an
+       interface.  The interface identified by a particular
+       value of this index is the same interface
+       as identified by the same value as an ifIndex
+       object instance.  If no interface is currently using
+       a channel, the value should be zero.  If a
+       single interface occupies more than one time-slot,
+       that ifIndex value will be found in multiple
+       time-slots."
+   ::= { dsx1FracEntry 3 }
+
+ -- DS1 TRAPS
+
+ds1Traps OBJECT IDENTIFIER ::= { ds1 15 }
+
+dsx1LineStatusChange NOTIFICATION-TYPE
+    OBJECTS { dsx1LineStatus,
+              dsx1LineStatusLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A dsx1LineStatusChange trap is sent when the
+            value of an instance dsx1LineStatus changes.  It
+            can be utilized by an Network Management Station
+            (NMS) to trigger polls.  When the line status
+            change results from a higher-level line status
+            change (i.e., DS3), then no traps for the DS1
+            are sent."
+     ::= { ds1Traps 0 1 }
+
+-- conformance information
+
+ds1Conformance OBJECT IDENTIFIER ::= { ds1 14 }
+
+ds1Groups      OBJECT IDENTIFIER ::= { ds1Conformance 1 }
+ds1Compliances OBJECT IDENTIFIER ::= { ds1Conformance 2 }
+
+-- compliance statements
+
+ds1Compliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for T1 and E1
+            interfaces."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ds1NearEndConfigGroup,
+                           ds1NearEndStatisticsGroup }
+
+        GROUP       ds1FarEndGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS1 interface."
+
+        GROUP       ds1NearEndOptionalConfigGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS1 interface."
+
+        GROUP       ds1DS2Group
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+            systems that attach to a DS2 interface."
+
+        GROUP       ds1TransStatsGroup
+        DESCRIPTION
+            "This group is the set of statistics appropriate
+            for all systems that attach to a DS1 interface
+            running transparent or unFramed lineType."
+
+        GROUP       ds1ChanMappingGroup
+        DESCRIPTION
+            "This group is the set of objects for mapping a
+            DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
+            Implementation of this group is mandatory for
+            systems that support the channelization of DS3s
+            into DS1s."
+
+        OBJECT dsx1LineType
+                SYNTAX  INTEGER {
+                            other(1),
+                            dsx1ESF(2),
+                            dsx1D4(3),
+                            dsx1E1(4),
+                            dsx1E1CRC(5),
+                            dsx1E1MF(6),
+                            dsx1E1CRCMF(7),
+                            dsx1Unframed(8),
+                            dsx1E1Unframed(9),
+                            dsx1DS2M12(10),
+                            dsx1E2(11)
+                          }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line type is not
+            required."
+
+        OBJECT dsx1LineCoding
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line coding is not
+            required."
+
+        OBJECT dsx1SendCode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the send code is not
+            required."
+
+        OBJECT dsx1LoopbackConfig
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set loopbacks is not required."
+
+        OBJECT dsx1SignalMode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the signal mode is not
+            required."
+
+        OBJECT dsx1TransmitClockSource
+                SYNTAX  INTEGER {
+                             loopTiming(1),
+                             localTiming(2),
+                             throughTiming(3)
+                           }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the transmit clock source is
+            not required."
+
+        OBJECT dsx1Fdl
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the FDL is not required."
+
+        OBJECT dsx1LineLength
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line length is not
+            required."
+
+        OBJECT dsx1Channelization
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the channelization is not
+            required."
+    ::= { ds1Compliances 1 }
+
+ds1MibT1PriCompliance MODULE-COMPLIANCE
+    STATUS deprecated
+    DESCRIPTION
+            "Compliance statement for using this MIB for ISDN
+            Primary Rate interfaces on T1 lines."
+    MODULE
+        MANDATORY-GROUPS { ds1NearEndConfigGroup,
+                           ds1NearEndStatisticsGroup }
+        OBJECT dsx1LineType
+            SYNTAX INTEGER {
+                dsx1ESF(2)   -- Intl Spec would be G704(2)
+
+                             -- or I.431(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Line type for T1 ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1LineCoding
+            SYNTAX INTEGER {
+                dsx1B8ZS(2)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Type of Zero Code Suppression for
+                 T1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1SignalMode
+            SYNTAX INTEGER {
+                none(1), -- if there is no signaling channel
+                messageOriented(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Possible signaling modes for
+                 T1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1TransmitClockSource
+            SYNTAX INTEGER {
+                loopTiming(1)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The transmit clock is derived from
+                 received clock on ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1Fdl
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Facilities Data Link usage on T1 ISDN
+                 Primary Rate interfaces.
+                 Note: Eventually, dsx1Att-54016(4) is to be
+                       used here since the line type is ESF."
+
+        OBJECT dsx1Channelization
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the channelization
+
+                 is not required."
+    ::= { ds1Compliances 2 }
+
+ds1MibE1PriCompliance MODULE-COMPLIANCE
+    STATUS deprecated
+    DESCRIPTION
+            "Compliance statement for using this MIB for ISDN
+            Primary Rate interfaces on E1 lines."
+    MODULE
+        MANDATORY-GROUPS { ds1NearEndConfigGroup,
+                           ds1NearEndStatisticsGroup }
+        OBJECT dsx1LineType
+            SYNTAX INTEGER {
+                dsx1E1CRC(5)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Line type for E1 ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1LineCoding
+            SYNTAX INTEGER {
+                dsx1HDB3(3)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Type of Zero Code Suppression for
+                 E1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1SignalMode
+            SYNTAX INTEGER {
+                messageOriented(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Signaling on E1 ISDN Primary Rate interfaces
+                 is always message oriented."
+
+        OBJECT dsx1TransmitClockSource
+            SYNTAX INTEGER {
+                loopTiming(1)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The transmit clock is derived from received
+                 clock on ISDN Primary Rate interfaces."
+
+        OBJECT dsx1Fdl
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Facilities Data Link usage on E1 ISDN
+                 Primary Rate interfaces.
+                 Note: There is an 'M-Channel' in E1,
+                       using National Bit Sa4 (G.704,
+                       Table 5A).  It is used to implement
+                       management features between ET
+                       and NT.  This is different from
+                       FDL in T1, which is used to carry
+                       control signals and performance
+                       data.  In E1, control and status
+                       signals are carried using National
+                       Bits Sa5, Sa6, and A (RAI Ind.).
+                 This indicates that only the other(1) or
+                 eventually the dsx1Fdl-none(8) bits should
+                 be set in this object for E1 PRI."
+
+        OBJECT dsx1Channelization
+            MIN-ACCESS read-only
+            DESCRIPTION
+                 "The ability to set the channelization is not
+                 required."
+    ::= { ds1Compliances 3 }
+
+ds1Ds2Compliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+            "Compliance statement for using this MIB for DS2
+            interfaces."
+    MODULE
+        MANDATORY-GROUPS { ds1DS2Group }
+
+        OBJECT dsx1LineType
+             SYNTAX INTEGER {
+                        dsx1DS2M12(10),
+                        dsx1E2(11)
+             }
+             MIN-ACCESS read-only
+             DESCRIPTION
+                 "Line type for DS2, E2
+                 interfaces."
+
+        OBJECT dsx1Channelization
+             MIN-ACCESS read-only
+             DESCRIPTION
+                 "The ability to set the channelization is not
+                 required."
+    ::= { ds1Compliances 4 }
+
+ds1NCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for T1 and E1
+            interfaces."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ds1NearEndConfigurationGroup,
+                           ds1NearEndStatisticsGroup }
+
+        GROUP       ds1FarEndGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS1 interface."
+
+         GROUP       ds1NearEndOptionalTrapGroup
+         DESCRIPTION
+             "Implementation of this group is optional for all
+             systems that attach to a DS1 interface.  If it is
+             implemented, then ds1NearEndOptionalConfigGroup
+             should also be implemented."
+
+        GROUP       ds1NearEndOptionalConfigGroup
+        DESCRIPTION
+            "Implementation of this group is recommended for
+            all systems that attach to a DS1 interface and
+            implement ds1NearEndOptionalTrapGroup."
+
+        GROUP       ds1DS2Group
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+            systems that attach to a DS2 interface."
+
+        GROUP       ds1TransStatsGroup
+        DESCRIPTION
+            "This group is the set of statistics appropriate
+            for all systems that attach to a DS1 interface
+            running transparent or unFramed lineType."
+
+        GROUP       ds1ChanMappingGroup
+        DESCRIPTION
+            "This group is the set of objects for mapping a
+            DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
+            Implementation of this group is mandatory for
+            systems that support the channelization of DS3s
+            into DS1s."
+
+        OBJECT dsx1LineType
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line type is not
+            required."
+
+        OBJECT dsx1LineCoding
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line coding is not
+            required."
+
+        OBJECT dsx1SendCode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the send code is not
+            required."
+
+        OBJECT dsx1LoopbackConfig
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set loopbacks is not required."
+
+        OBJECT dsx1SignalMode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the signal mode is not
+            required."
+
+        OBJECT dsx1TransmitClockSource
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the transmit clock source is
+            not required."
+
+        OBJECT dsx1Fdl
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the FDL is not required."
+
+        OBJECT dsx1LineLength
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line length is not
+            required."
+
+        OBJECT dsx1Channelization
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the channelization is not
+            required."
+
+        OBJECT dsx1LineMode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line mode is not
+            required."
+
+        OBJECT dsx1LineBuildOut
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line build-out is not
+            required."
+    ::= { ds1Compliances 5 }
+
+ds1MibT1PriNCompliance MODULE-COMPLIANCE
+    STATUS deprecated
+    DESCRIPTION
+            "Compliance statement for using this MIB for ISDN
+            Primary Rate interfaces on T1 lines."
+    MODULE
+        MANDATORY-GROUPS { ds1NearEndConfigurationGroup,
+                           ds1NearEndStatisticsGroup }
+        OBJECT dsx1LineType
+            SYNTAX INTEGER {
+                dsx1ESF(2)   -- Intl Spec would be G704(2)
+                             -- or I.431(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Line type for T1 ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1LineCoding
+            SYNTAX INTEGER {
+                dsx1B8ZS(2)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Type of Zero Code Suppression for
+                 T1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1SignalMode
+            SYNTAX INTEGER {
+                none(1), -- if there is no signaling channel
+                messageOriented(4)
+
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Possible signaling modes for
+                 T1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1TransmitClockSource
+            SYNTAX INTEGER {
+                loopTiming(1)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The transmit clock is derived from
+                 received clock on ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1Fdl
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Facilities Data Link usage on T1 ISDN
+                 Primary Rate interfaces.
+                 Note: Eventually, dsx1Att-54016(4) is to be
+                       used here since the line type is ESF."
+
+        OBJECT dsx1Channelization
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the channelization
+                 is not required."
+
+        OBJECT dsx1LineMode
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line mode is not
+                 required."
+
+        OBJECT dsx1LineBuildOut
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line build-out
+                 is not required."
+    ::= { ds1Compliances 6 }
+
+ds1MibE1PriNCompliance MODULE-COMPLIANCE
+    STATUS deprecated
+    DESCRIPTION
+            "Compliance statement for using this MIB for ISDN
+            Primary Rate interfaces on E1 lines."
+
+    MODULE
+        MANDATORY-GROUPS { ds1NearEndConfigurationGroup,
+                           ds1NearEndStatisticsGroup }
+        OBJECT dsx1LineType
+            SYNTAX INTEGER {
+                dsx1E1CRC(5)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Line type for E1 ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1LineCoding
+            SYNTAX INTEGER {
+                dsx1HDB3(3)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Type of Zero Code Suppression for
+                 E1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1SignalMode
+            SYNTAX INTEGER {
+                messageOriented(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Signaling on E1 ISDN Primary Rate interfaces
+                 is always message oriented."
+
+        OBJECT dsx1TransmitClockSource
+            SYNTAX INTEGER {
+                loopTiming(1)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The transmit clock is derived from received
+                 clock on ISDN Primary Rate interfaces."
+
+        OBJECT dsx1Fdl
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Facilities Data Link usage on E1 ISDN
+                 Primary Rate interfaces.
+                 Note: There is an 'M-Channel' in E1,
+                       using National Bit Sa4 (G704,
+                       Table 5A).  It is used to implement
+
+                       management features between ET
+                       and NT.  This is different from
+                       FDL in T1, which is used to carry
+                       control signals and performance
+                       data.  In E1, control and status
+                       signals are carried using National
+                       Bits Sa5, Sa6, and A (RAI Ind.).
+                 This indicates that only the other(1) or
+                 eventually the dsx1Fdl-none(8) bits should
+                 be set in this object for E1 PRI."
+
+        OBJECT dsx1Channelization
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the channelization is not
+                 required."
+
+        OBJECT dsx1LineMode
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line mode is not
+                 required."
+
+        OBJECT dsx1LineBuildOut
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line build-out
+                 is not required."
+    ::= { ds1Compliances 7 }
+
+ds1J1Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for T1, J1, and E1
+            interfaces."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ds1NearEndCfgGroup,
+                           ds1NearEndStatGroup }
+
+        GROUP       ds1FarEndNGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS1 interface."
+
+         GROUP       ds1NearEndOptionalTrapGroup
+         DESCRIPTION
+             "Implementation of this group is optional for all
+             systems that attach to a DS1 interface.  If it is
+
+             implemented, then ds1NearEndOptionalConfigGroup
+             should also be implemented."
+
+        GROUP       ds1NearEndOptionalConfigGroup
+        DESCRIPTION
+            "Implementation of this group is recommended for
+            all systems that attach to a DS1 interface and
+            implement ds1NearEndOptionalTrapGroup."
+
+        GROUP       ds1DS2Group
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+            systems that attach to a DS2 interface."
+
+        GROUP       ds1TransStatsGroup
+        DESCRIPTION
+            "This group is the set of statistics appropriate
+            for all systems that attach to a DS1 interface
+            running transparent or unFramed lineType."
+
+        GROUP       ds1ChanMappingGroup
+        DESCRIPTION
+            "This group is the set of objects for mapping a
+            DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
+            Implementation of this group is mandatory for
+            systems that support the channelization of DS3s
+            into DS1s."
+
+        OBJECT dsx1LineType
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line type is not
+            required."
+
+        OBJECT dsx1LineCoding
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line coding is not
+            required."
+
+        OBJECT dsx1SendCode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the send code is not
+            required."
+
+        OBJECT dsx1LoopbackConfig
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set loopbacks is not required."
+
+        OBJECT dsx1SignalMode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the signal mode is not
+            required."
+
+        OBJECT dsx1TransmitClockSource
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the transmit clock source is
+            not required."
+
+        OBJECT dsx1Fdl
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the FDL is not required."
+
+        OBJECT dsx1LineLength
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line length is not
+            required."
+
+        OBJECT dsx1Channelization
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the channelization is not
+            required."
+
+        OBJECT dsx1LineMode
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line mode is not
+            required."
+
+        OBJECT dsx1LineBuildOut
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set the line build-out is not
+            required."
+
+        OBJECT dsx1LineImpedance
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The ability to set line impedance is not
+
+            required."
+    ::= { ds1Compliances 8 }
+
+ds1NMibT1PriNCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+            "Compliance statement for using this MIB for ISDN
+            Primary Rate interfaces on T1 lines."
+    MODULE
+        MANDATORY-GROUPS { ds1NearEndCfgGroup,
+                           ds1NearEndStatGroup }
+        OBJECT dsx1LineType
+            SYNTAX INTEGER {
+                dsx1ESF(2)   -- Intl Spec would be G704(2)
+                             -- or I.431(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Line type for T1 ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1LineCoding
+            SYNTAX INTEGER {
+                dsx1B8ZS(2)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Type of Zero Code Suppression for
+                 T1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1SignalMode
+            SYNTAX INTEGER {
+                none(1), -- if there is no signaling channel
+                messageOriented(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Possible signaling modes for
+                 T1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1TransmitClockSource
+            SYNTAX INTEGER {
+                loopTiming(1)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The transmit clock is derived from
+                 received clock on ISDN Primary Rate
+
+                 interfaces."
+
+        OBJECT dsx1Fdl
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Facilities Data Link usage on T1 ISDN
+                 Primary Rate interfaces.
+                 Note: Eventually, dsx1Att-54016(4) is to be
+                       used here since the line type is ESF."
+
+        OBJECT dsx1Channelization
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the channelization
+                 is not required."
+
+        OBJECT dsx1LineMode
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line mode is not
+                 required."
+
+        OBJECT dsx1LineBuildOut
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line build-out
+                 is not required."
+    ::= { ds1Compliances 9 }
+
+ds1NMibE1PriNCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+            "Compliance statement for using this MIB for ISDN
+            Primary Rate interfaces on E1 lines."
+    MODULE
+        MANDATORY-GROUPS { ds1NearEndCfgGroup,
+                           ds1NearEndStatGroup }
+
+        OBJECT dsx1LineType
+            SYNTAX INTEGER {
+                dsx1E1CRC(5)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Line type for E1 ISDN Primary Rate
+                 interfaces."
+
+        OBJECT dsx1LineCoding
+            SYNTAX INTEGER {
+                dsx1HDB3(3)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Type of Zero Code Suppression for
+                 E1 ISDN Primary Rate interfaces."
+
+        OBJECT dsx1SignalMode
+            SYNTAX INTEGER {
+                messageOriented(4)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Signaling on E1 ISDN Primary Rate interfaces
+                 is always message oriented."
+
+        OBJECT dsx1TransmitClockSource
+            SYNTAX INTEGER {
+                loopTiming(1)
+            }
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The transmit clock is derived from received
+                 clock on ISDN Primary Rate interfaces."
+
+        OBJECT dsx1Fdl
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "Facilities Data Link usage on E1 ISDN
+                 Primary Rate interfaces.
+                 Note: There is an 'M-Channel' in E1,
+                       using National Bit Sa4 (G704,
+                       Table 5A).  It is used to implement
+                       management features between ET
+                       and NT.  This is different from
+                       FDL in T1, which is used to carry
+                       control signals and performance
+                       data.  In E1, control and status
+                       signals are carried using National
+                       Bits Sa5, Sa6, and A (RAI Ind.).
+                 This indicates that only the other(1) or
+                 eventually the dsx1Fdl-none(8) bits should
+                 be set in this object for E1 PRI."
+
+        OBJECT dsx1Channelization
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the channelization is not
+                 required."
+
+        OBJECT dsx1LineMode
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line mode is not
+                required."
+
+        OBJECT dsx1LineBuildOut
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set the line build-out
+                 is not required."
+
+        OBJECT dsx1LineImpedance
+            MIN-ACCESS read-only
+            DESCRIPTION
+                "The ability to set line impedance is not
+                 required."
+     ::= { ds1Compliances 10 }
+
+-- units of conformance
+
+ds1NearEndConfigGroup  OBJECT-GROUP
+    OBJECTS { dsx1LineIndex,
+              dsx1TimeElapsed,
+              dsx1ValidIntervals,
+              dsx1LineType,
+              dsx1LineCoding,
+              dsx1SendCode,
+              dsx1CircuitIdentifier,
+              dsx1LoopbackConfig,
+              dsx1LineStatus,
+              dsx1SignalMode,
+              dsx1TransmitClockSource,
+              dsx1Fdl,
+              dsx1InvalidIntervals,
+              dsx1LineLength,
+              dsx1LoopbackStatus,
+              dsx1Ds1ChannelNumber,
+              dsx1Channelization                      }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all DS1 interfaces."
+    ::= { ds1Groups 1 }
+
+ds1NearEndStatisticsGroup OBJECT-GROUP
+    OBJECTS { dsx1CurrentIndex,
+              dsx1CurrentESs,
+              dsx1CurrentSESs,
+              dsx1CurrentSEFSs,
+              dsx1CurrentUASs,
+              dsx1CurrentCSSs,
+              dsx1CurrentPCVs,
+              dsx1CurrentLESs,
+              dsx1CurrentBESs,
+              dsx1CurrentDMs,
+              dsx1CurrentLCVs,
+              dsx1IntervalIndex,
+              dsx1IntervalNumber,
+              dsx1IntervalESs,
+              dsx1IntervalSESs,
+              dsx1IntervalSEFSs,
+              dsx1IntervalUASs,
+              dsx1IntervalCSSs,
+              dsx1IntervalPCVs,
+              dsx1IntervalLESs,
+              dsx1IntervalBESs,
+              dsx1IntervalDMs,
+              dsx1IntervalLCVs,
+              dsx1IntervalValidData,
+              dsx1TotalIndex,
+              dsx1TotalESs,
+              dsx1TotalSESs,
+              dsx1TotalSEFSs,
+              dsx1TotalUASs,
+              dsx1TotalCSSs,
+              dsx1TotalPCVs,
+              dsx1TotalLESs,
+              dsx1TotalBESs,
+              dsx1TotalDMs,
+              dsx1TotalLCVs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing statistics
+            information applicable to all DS1 interfaces."
+    ::= { ds1Groups 2 }
+
+ds1FarEndGroup  OBJECT-GROUP
+    OBJECTS { dsx1FarEndCurrentIndex,
+              dsx1FarEndTimeElapsed,
+              dsx1FarEndValidIntervals,
+              dsx1FarEndCurrentESs,
+              dsx1FarEndCurrentSESs,
+              dsx1FarEndCurrentSEFSs,
+              dsx1FarEndCurrentUASs,
+              dsx1FarEndCurrentCSSs,
+              dsx1FarEndCurrentLESs,
+              dsx1FarEndCurrentPCVs,
+              dsx1FarEndCurrentBESs,
+              dsx1FarEndCurrentDMs,
+              dsx1FarEndInvalidIntervals,
+              dsx1FarEndIntervalIndex,
+              dsx1FarEndIntervalNumber,
+              dsx1FarEndIntervalESs,
+              dsx1FarEndIntervalSESs,
+              dsx1FarEndIntervalSEFSs,
+              dsx1FarEndIntervalUASs,
+              dsx1FarEndIntervalCSSs,
+              dsx1FarEndIntervalLESs,
+              dsx1FarEndIntervalPCVs,
+              dsx1FarEndIntervalBESs,
+              dsx1FarEndIntervalDMs,
+              dsx1FarEndIntervalValidData,
+              dsx1FarEndTotalIndex,
+              dsx1FarEndTotalESs,
+              dsx1FarEndTotalSESs,
+              dsx1FarEndTotalSEFSs,
+              dsx1FarEndTotalUASs,
+              dsx1FarEndTotalCSSs,
+              dsx1FarEndTotalLESs,
+              dsx1FarEndTotalPCVs,
+              dsx1FarEndTotalBESs,
+              dsx1FarEndTotalDMs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing remote
+            configuration and statistics information."
+    ::= { ds1Groups 3 }
+
+ds1DeprecatedGroup OBJECT-GROUP
+    OBJECTS { dsx1IfIndex,
+              dsx1FracIndex,
+              dsx1FracNumber,
+              dsx1FracIfIndex }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of obsolete objects that may be
+            implemented for backwards compatibility."
+    ::= { ds1Groups 4 }
+
+ds1NearEndOptionalConfigGroup OBJECT-GROUP
+
+    OBJECTS { dsx1LineStatusLastChange,
+              dsx1LineStatusChangeTrapEnable }
+    STATUS    current
+    DESCRIPTION
+            "A collection of objects that may be implemented
+            on DS1 and DS2 interfaces."
+    ::= { ds1Groups 5 }
+
+ds1DS2Group OBJECT-GROUP
+    OBJECTS { dsx1LineIndex,
+              dsx1LineType,
+              dsx1LineCoding,
+              dsx1SendCode,
+              dsx1LineStatus,
+              dsx1SignalMode,
+              dsx1TransmitClockSource,
+              dsx1Channelization }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects providing information
+            about DS2 (6,312 kbps) and E2 (8,448 kbps)
+            systems."
+    ::= { ds1Groups 6 }
+
+ds1TransStatsGroup OBJECT-GROUP
+    OBJECTS { dsx1CurrentESs,
+              dsx1CurrentSESs,
+              dsx1CurrentUASs,
+              dsx1IntervalESs,
+              dsx1IntervalSESs,
+              dsx1IntervalUASs,
+              dsx1TotalESs,
+              dsx1TotalSESs,
+              dsx1TotalUASs }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects that are the
+            statistics that can be collected from a DS1
+            interface that is running transparent or unframed
+            lineType.  Statistics not in this list should
+            return noSuchInstance."
+    ::= { ds1Groups 7 }
+
+ds1NearEndOptionalTrapGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { dsx1LineStatusChange }
+    STATUS    current
+    DESCRIPTION
+            "A collection of notifications that may be
+            implemented on DS1 and DS2 interfaces."
+    ::= { ds1Groups 8 }
+
+ds1ChanMappingGroup OBJECT-GROUP
+    OBJECTS { dsx1ChanMappedIfIndex }
+    STATUS    current
+    DESCRIPTION
+            "A collection of objects that give a mapping of
+            DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex."
+    ::= { ds1Groups 9 }
+
+ds1NearEndConfigurationGroup  OBJECT-GROUP
+    OBJECTS { dsx1LineIndex,
+              dsx1TimeElapsed,
+              dsx1ValidIntervals,
+              dsx1LineType,
+              dsx1LineCoding,
+              dsx1SendCode,
+              dsx1CircuitIdentifier,
+              dsx1LoopbackConfig,
+              dsx1LineStatus,
+              dsx1SignalMode,
+              dsx1TransmitClockSource,
+              dsx1Fdl,
+              dsx1InvalidIntervals,
+              dsx1LineLength,
+              dsx1LoopbackStatus,
+              dsx1Ds1ChannelNumber,
+              dsx1Channelization,
+              dsx1LineMode,
+              dsx1LineBuildOut                      }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all DS1 interfaces."
+    ::= { ds1Groups 10 }
+
+ds1NearEndCfgGroup  OBJECT-GROUP
+    OBJECTS { dsx1LineIndex,
+              dsx1TimeElapsed,
+              dsx1ValidIntervals,
+              dsx1LineType,
+              dsx1LineCoding,
+              dsx1SendCode,
+              dsx1CircuitIdentifier,
+              dsx1LoopbackConfig,
+              dsx1LineStatus,
+              dsx1SignalMode,
+              dsx1TransmitClockSource,
+              dsx1Fdl,
+              dsx1InvalidIntervals,
+              dsx1LineLength,
+              dsx1LoopbackStatus,
+              dsx1Ds1ChannelNumber,
+              dsx1Channelization,
+              dsx1LineMode,
+              dsx1LineBuildOut,
+              dsx1LineImpedance                     }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all DS1 interfaces."
+    ::= { ds1Groups 11 }
+
+ds1NearEndStatGroup OBJECT-GROUP
+    OBJECTS { dsx1CurrentIndex,
+              dsx1CurrentESs,
+              dsx1CurrentSESs,
+              dsx1CurrentSEFSs,
+              dsx1CurrentUASs,
+              dsx1CurrentCSSs,
+              dsx1CurrentPCVs,
+              dsx1CurrentLESs,
+              dsx1CurrentBESs,
+              dsx1CurrentLCVs,
+              dsx1IntervalIndex,
+              dsx1IntervalNumber,
+              dsx1IntervalESs,
+              dsx1IntervalSESs,
+              dsx1IntervalSEFSs,
+              dsx1IntervalUASs,
+              dsx1IntervalCSSs,
+              dsx1IntervalPCVs,
+              dsx1IntervalLESs,
+              dsx1IntervalBESs,
+              dsx1IntervalLCVs,
+              dsx1IntervalValidData,
+              dsx1TotalIndex,
+              dsx1TotalESs,
+              dsx1TotalSESs,
+              dsx1TotalSEFSs,
+              dsx1TotalUASs,
+              dsx1TotalCSSs,
+              dsx1TotalPCVs,
+              dsx1TotalLESs,
+              dsx1TotalBESs,
+              dsx1TotalLCVs }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing statistics
+            information applicable to all DS1 interfaces."
+    ::= { ds1Groups 12 }
+
+ds1FarEndNGroup  OBJECT-GROUP
+    OBJECTS { dsx1FarEndCurrentIndex,
+              dsx1FarEndTimeElapsed,
+              dsx1FarEndValidIntervals,
+              dsx1FarEndCurrentESs,
+              dsx1FarEndCurrentSESs,
+              dsx1FarEndCurrentSEFSs,
+              dsx1FarEndCurrentUASs,
+              dsx1FarEndCurrentCSSs,
+              dsx1FarEndCurrentLESs,
+              dsx1FarEndCurrentPCVs,
+              dsx1FarEndCurrentBESs,
+              dsx1FarEndInvalidIntervals,
+              dsx1FarEndIntervalIndex,
+              dsx1FarEndIntervalNumber,
+              dsx1FarEndIntervalESs,
+              dsx1FarEndIntervalSESs,
+              dsx1FarEndIntervalSEFSs,
+              dsx1FarEndIntervalUASs,
+              dsx1FarEndIntervalCSSs,
+              dsx1FarEndIntervalLESs,
+              dsx1FarEndIntervalPCVs,
+              dsx1FarEndIntervalBESs,
+              dsx1FarEndIntervalValidData,
+              dsx1FarEndTotalIndex,
+              dsx1FarEndTotalESs,
+              dsx1FarEndTotalSESs,
+              dsx1FarEndTotalSEFSs,
+              dsx1FarEndTotalUASs,
+              dsx1FarEndTotalCSSs,
+              dsx1FarEndTotalLESs,
+              dsx1FarEndTotalPCVs,
+              dsx1FarEndTotalBESs}
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing remote
+            configuration and statistics information."
+    ::= { ds1Groups 13 }
+END
diff --git a/snmp_builder/mibs/DS3-MIB.mib b/snmp_builder/mibs/DS3-MIB.mib
new file mode 100644
index 0000000..2d1e7f3
--- /dev/null
+++ b/snmp_builder/mibs/DS3-MIB.mib
@@ -0,0 +1,1786 @@
+DS3-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE,
+     NOTIFICATION-TYPE, transmission
+          FROM SNMPv2-SMI                    -- [RFC2578]
+     DisplayString, TimeStamp, TruthValue
+          FROM SNMPv2-TC                     -- [RFC2579]
+     MODULE-COMPLIANCE, OBJECT-GROUP,
+     NOTIFICATION-GROUP
+          FROM SNMPv2-CONF                   -- [RFC2580]
+     InterfaceIndex
+          FROM IF-MIB                        -- [RFC2863]
+     PerfCurrentCount, PerfIntervalCount,
+     PerfTotalCount
+          FROM PerfHist-TC-MIB;              -- [RFC3593]
+
+ds3 MODULE-IDENTITY
+    LAST-UPDATED "200409080000Z"  -- September 08, 2004
+    ORGANIZATION "IETF AToM MIB Working Group"
+    CONTACT-INFO
+      "WG charter:
+         http://www.ietf.org/html.charters/atommib-charter.html
+
+       Mailing Lists:
+         General Discussion: atommib@research.telcordia.com
+         To Subscribe: atommib-request@research.telcordia.com
+
+       Editor: Orly Nicklass
+
+       Postal: RAD Data Communications, Ltd.
+               Ziv Tower, 24 Roul Walenberg
+               Tel Aviv, Israel, 69719
+
+               Tel: +9723 765 9969
+       E-mail: orly_n@rad.com"
+    DESCRIPTION
+         "The is the MIB module that describes
+          DS3 and E3 interfaces objects.
+
+          Copyright (c) The Internet Society (2004).  This
+          version of this MIB module is part of RFC 3896;
+          see the RFC itself for full legal notices."
+
+    REVISION "200409080000Z"  -- September 08, 2004
+     DESCRIPTION
+          "The RFC 3896 version of this MIB module.
+          The key changes made to this MIB module
+          since its publication in RFC 2496 are as follows:
+
+      (1) The dsx3FracIfIndex SYNTAX matches the description range.
+
+      (2) Reference was added to Circuit Identifier object.
+
+      (3) Usage of ifStackTable section was updated.
+
+      (4) Align the DESCRIPTION clauses of few statistic objects with
+          thenear end definition, the far end definition and with
+          RFC 3593.
+
+      (5) Add new value, dsx3M13, to dsx3LineType."
+
+     REVISION "199808012130Z"
+     DESCRIPTION
+          "The RFC 2496 version of this MIB module.
+          The key changes made to this MIB module
+          since its publication in RFC 1407 are as follows:
+
+         (1)  The Fractional Table has been deprecated.
+
+         (2)  This document uses SMIv2.
+
+         (3)  Values are given for ifTable and ifXTable.
+
+         (4)  Example usage of ifStackTable is included.
+
+         (5)  dsx3IfIndex has been deprecated.
+
+         (6)  The definition of valid intervals has been clarified
+              for the case where the agent proxied for other devices.
+              In particular, the treatment of missing intervals has
+              been clarified.
+
+        (7)  An inward loopback has been added.
+
+        (8)  Additional lineStatus bits have been added for Near End
+             in Unavailable Signal State, Carrier Equipment Out of
+             Service.
+
+        (9)  A read-write line Length object has been added.
+
+        (10) Added a lineStatus last change, trap and enabler.
+
+        (11) Textual Conventions for statistics objects have
+             been used.
+
+        (12) A new object, dsx3LoopbackStatus, has been introduced to
+             reflect the loopbacks established on a DS3/E3 interface
+             and the source to the requests.  dsx3LoopbackConfig
+             continues to be the desired loopback state while
+             dsx3LoopbackStatus reflects the actual state.
+
+        (13) A dual loopback has been added to allow the setting of
+             an inward loopback and a line loopback at the same time.
+
+        (14) An object has been added to indicated whether or not
+             this is a channelized DS3/E3.
+
+        (15) A new object has been added to indicate which DS1 is to
+             set for remote loopback."
+
+    REVISION "199301252028Z"
+    DESCRIPTION
+         "Initial version, published as RFC 1407."
+    ::= { transmission 30 }
+
+-- The DS3/E3 Near End Group
+
+-- The DS3/E3 Near End Group consists of four tables:
+--    DS3/E3 Configuration
+--    DS3/E3 Current
+--    DS3/E3 Interval
+--    DS3/E3 Total
+
+-- the DS3/E3 Configuration Table
+
+dsx3ConfigTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3ConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3/E3 Configuration table."
+     ::= { ds3 5 }
+
+dsx3ConfigEntry OBJECT-TYPE
+     SYNTAX  Dsx3ConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3/E3 Configuration table."
+     INDEX   { dsx3LineIndex }
+     ::= { dsx3ConfigTable 1 }
+
+Dsx3ConfigEntry ::=
+     SEQUENCE {
+         dsx3LineIndex                        InterfaceIndex,
+         dsx3IfIndex                          InterfaceIndex,
+         dsx3TimeElapsed                      INTEGER,
+         dsx3ValidIntervals                   INTEGER,
+         dsx3LineType                         INTEGER,
+         dsx3LineCoding                       INTEGER,
+         dsx3SendCode                         INTEGER,
+         dsx3CircuitIdentifier                DisplayString,
+         dsx3LoopbackConfig                   INTEGER,
+         dsx3LineStatus                       INTEGER,
+         dsx3TransmitClockSource              INTEGER,
+         dsx3InvalidIntervals                 INTEGER,
+         dsx3LineLength                       INTEGER,
+         dsx3LineStatusLastChange             TimeStamp,
+         dsx3LineStatusChangeTrapEnable       INTEGER,
+         dsx3LoopbackStatus                   INTEGER,
+         dsx3Channelization                   INTEGER,
+         dsx3Ds1ForRemoteLoop                 INTEGER
+
+}
+
+dsx3LineIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "This object should be made equal to ifIndex.  The
+            next paragraph describes its previous usage.
+            Making the object equal to ifIndex allows proper
+            use of ifStackTable.
+
+            Previously, this object was the identifier of a
+            DS3/E3 Interface on a managed device.  If there is
+            an ifEntry that is directly associated with this
+            and only this DS3/E3 interface, it should have the
+            same value as ifIndex.  Otherwise, number the
+            dsx3LineIndices with an unique identifier
+            following the rules of choosing a number that is
+            greater than ifNumber and numbering the inside
+            interfaces (e.g., equipment side) with even
+            numbers and outside interfaces (e.g., network side)
+            with odd numbers."
+     ::= { dsx3ConfigEntry 1 }
+
+dsx3IfIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only
+     STATUS  deprecated
+     DESCRIPTION
+            "This value for this object is equal to the value
+            of ifIndex from the Interfaces table of MIB II
+            (RFC 1213)."
+     ::= { dsx3ConfigEntry 2 }
+
+dsx3TimeElapsed OBJECT-TYPE
+     SYNTAX  INTEGER (0..899)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of seconds that have elapsed since the
+
+            beginning of the near end current error-
+            measurement period. If, for some reason, such as
+            an adjustment in the system's time-of-day clock,
+            the current interval exceeds the maximum value,
+            the agent will return the maximum value."
+     ::= { dsx3ConfigEntry 3 }
+
+dsx3ValidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of previous near end intervals for
+            which data was collected.  The value will be 96
+            unless the interface was brought online within the
+            last 24 hours, in which case the value will be the
+            number of complete 15 minute near end intervals
+            since the interface has been online.  In the case
+            where the agent is a proxy, it is possible that
+            some intervals are unavailable.  In this case,
+            this interval is the maximum interval number for
+            which data is available."
+     ::= { dsx3ConfigEntry 4 }
+
+dsx3LineType OBJECT-TYPE
+     SYNTAX  INTEGER {
+                dsx3other(1),
+                dsx3M23(2),
+                dsx3SYNTRAN(3),
+                dsx3CbitParity(4),
+                dsx3ClearChannel(5),
+                e3other(6),
+                e3Framed(7),
+                e3Plcp(8),
+                dsx3M13(9)
+            }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable indicates the variety of DS3 C-bit
+            or E3 application implementing this interface. The
+            type of interface affects the interpretation of
+            the usage and error statistics.  The rate of DS3
+            is 44.736 Mbps and E3 is 34.368 Mbps.  The
+            dsx3ClearChannel value means that the C-bits are
+            not used except for sending/receiving AIS.  The
+            values, in sequence, describe:
+
+                           TITLE:          SPECIFICATION:
+                           dsx3M23         ANSI T1.107-1988
+                           dsx3SYNTRAN     ANSI T1.107-1988
+                           dsx3CbitParity  ANSI T1.107a-1990
+                           dsx3ClearChannel ANSI T1.102-1987
+                           e3Framed        CCITT G.751
+                           e3Plcp          ETSI T/NA(91)18
+                           dsx3M13         ANSI T1.107a-1990."
+    REFERENCE
+            "American National Standard for telecommunications
+                 - digital hierarchy -
+                 formats specification, ANSI T1.107- 1988.
+                 ANSI T1.107a-1990.
+             American National Standard for telecommunications
+                 - digital hierarchy -
+                 electrical interfaces, ANSI T1.102- 1987.
+             CCITT - Digital Multiplex Equipment Operating at
+                 the Third Order Bit Rate of 34 368 Kbit/s and
+                 the Forth Order Bit Rate of 139 264 Kbit/s
+                 and Using Positive Justification, G.751
+             European Telecommunications Standards Institute
+                 -- ETS '34M' --
+                 Metropolitan Area Network Physical
+                 Convergence Layer Procedure for
+                 34.368 Megabits per Second, T/NA(91)18,
+                 May 1991."
+     ::= { dsx3ConfigEntry 5 }
+
+dsx3LineCoding OBJECT-TYPE
+     SYNTAX  INTEGER {
+                dsx3Other(1),
+                dsx3B3ZS(2),
+                e3HDB3(3)
+            }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable describes the variety of Zero Code
+            Suppression used on this interface, which in turn
+            affects a number of its characteristics.
+            dsx3B3ZS and e3HDB3 refer to the use of specified
+            patterns of normal bits and bipolar violations
+            which are used to replace sequences of zero bits
+            of a specified length."
+     ::= { dsx3ConfigEntry 6 }
+
+dsx3SendCode OBJECT-TYPE
+     SYNTAX  INTEGER {
+               dsx3SendNoCode(1),
+               dsx3SendLineCode(2),
+               dsx3SendPayloadCode(3),
+               dsx3SendResetCode(4),
+               dsx3SendDS1LoopCode(5),
+               dsx3SendTestPattern(6)
+               }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable indicates what type of code is
+            being sent across the DS3/E3 interface by the
+            device.  (These are optional for E3 interfaces.)
+            Setting this variable causes the interface to
+            begin sending the code requested.
+            The values mean:
+
+               dsx3SendNoCode
+                   sending looped or normal data
+
+               dsx3SendLineCode
+                   sending a request for a line loopback
+
+               dsx3SendPayloadCode
+                   sending a request for a payload loopback
+                   (i.e., all DS1/E1s in a DS3/E3 frame)
+
+               dsx3SendResetCode
+                   sending a loopback deactivation request
+
+               dsx3SendDS1LoopCode
+                   requesting to loopback a particular DS1/E1
+                   within a DS3/E3 frame.  The DS1/E1 is
+                   indicated in dsx3Ds1ForRemoteLoop.
+
+               dsx3SendTestPattern
+                   sending a test pattern."
+     ::= { dsx3ConfigEntry 7 }
+
+dsx3CircuitIdentifier OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..255))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This variable contains the transmission vendor's
+            circuit identifier, for the purpose of
+            facilitating troubleshooting."
+     REFERENCE "ITU-T M.1400"
+     ::= { dsx3ConfigEntry 8 }
+
+dsx3LoopbackConfig OBJECT-TYPE
+     SYNTAX  INTEGER {
+                 dsx3NoLoop(1),
+                 dsx3PayloadLoop(2),
+                 dsx3LineLoop(3),
+                 dsx3OtherLoop(4),
+                 dsx3InwardLoop(5),
+                 dsx3DualLoop(6)
+               }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+          "This variable represents the desired loopback
+          configuration of the DS3/E3 interface.
+          The values mean:
+
+          dsx3NoLoop
+            Not in the loopback state.  A device that is
+            not capable of performing a loopback on
+            the interface shall always return this as
+            its value.
+
+          dsx3PayloadLoop
+            The received signal at this interface is looped
+            through the device.  Typically the received signal
+            is looped back for retransmission after it has
+            passed through the device's framing function.
+
+          dsx3LineLoop
+            The received signal at this interface does not
+            go through the device (minimum penetration) but
+            is looped back out.
+
+          dsx3OtherLoop
+            Loopbacks that are not defined here.
+
+          dsx3InwardLoop
+            The sent signal at this interface is looped back
+            through the device.
+
+          dsx3DualLoop
+            Both dsx1LineLoop and dsx1InwardLoop will be
+            active simultaneously."
+     ::= { dsx3ConfigEntry 9 }
+
+dsx3LineStatus OBJECT-TYPE
+     SYNTAX  INTEGER (1..4095)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "This variable indicates the Line Status of the
+            interface.  It contains loopback state information
+            and failure state information.  The dsx3LineStatus
+            is a bit map represented as a sum, therefore, it
+            can represent multiple failures and a loopback
+            (see dsx3LoopbackConfig object for the type of
+            loopback) simultaneously.  The dsx3NoAlarm must be
+            set if and only if no other flag is set.
+
+            If the dsx3loopbackState bit is set, the loopback
+            in effect can be determined from the
+            dsx3loopbackConfig object.
+       The various bit positions are:
+        1     dsx3NoAlarm         No alarm present
+        2     dsx3RcvRAIFailure   Receiving Yellow/Remote
+                                  Alarm Indication
+        4     dsx3XmitRAIAlarm    Transmitting Yellow/Remote
+                                  Alarm Indication
+        8     dsx3RcvAIS          Receiving AIS failure state
+       16     dsx3XmitAIS         Transmitting AIS
+       32     dsx3LOF             Receiving LOF failure state
+       64     dsx3LOS             Receiving LOS failure state
+      128     dsx3LoopbackState   Looping the received signal
+      256     dsx3RcvTestCode     Receiving a Test Pattern
+      512     dsx3OtherFailure    any line status not defined
+                                  here
+     1024     dsx3UnavailSigState Near End in Unavailable
+                                  Signal State
+     2048     dsx3NetEquipOOS     Carrier Equipment Out of
+                                  Service"
+     ::= { dsx3ConfigEntry 10 }
+
+dsx3TransmitClockSource OBJECT-TYPE
+     SYNTAX  INTEGER {
+                loopTiming(1),
+                localTiming(2),
+                throughTiming(3)
+            }
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "The source of Transmit Clock.
+
+            loopTiming indicates that the recovered receive
+            clock is used as the transmit clock.
+
+            localTiming indicates that a local clock source is
+            used or that an external clock is attached to the
+            box containing the interface.
+
+            throughTiming indicates that transmit clock is
+            derived from the recovered receive clock of
+            another DS3 interface."
+     ::= { dsx3ConfigEntry 11 }
+
+dsx3InvalidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            " The number of intervals in the range from 0 to
+            dsx3ValidIntervals for which no data is available.
+            This object will typically be zero except in cases
+            where the data for some intervals are not
+            available (e.g., in proxy situations)."
+     ::= { dsx3ConfigEntry 12 }
+
+dsx3LineLength OBJECT-TYPE
+     SYNTAX  INTEGER (0..64000)
+     UNITS "meters"
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "The length of the ds3 line in meters.  This
+            object provides information for line build out
+            circuitry if it exists and can use this object to
+            adjust the line build out."
+     ::= { dsx3ConfigEntry 13 }
+
+dsx3LineStatusLastChange OBJECT-TYPE
+     SYNTAX  TimeStamp
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The value of MIB II's sysUpTime object at the
+            time this DS3/E3 entered its current line status
+            state.  If the current state was entered prior to
+            the last re-initialization of the proxy-agent,
+            then this object contains a zero value."
+     ::= { dsx3ConfigEntry 14 }
+
+dsx3LineStatusChangeTrapEnable  OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Indicates whether dsx3LineStatusChange traps
+            should be generated for this interface."
+     DEFVAL { disabled }
+     ::= { dsx3ConfigEntry 15 }
+
+dsx3LoopbackStatus  OBJECT-TYPE
+     SYNTAX      INTEGER (1..127)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+            "This variable represents the current state of the
+            loopback on the DS3 interface.  It contains
+            information about loopbacks established by a
+            manager and remotely from the far end.
+
+            The dsx3LoopbackStatus is a bit map represented as
+            a sum, therefore is can represent multiple
+            loopbacks simultaneously.
+
+            The various bit positions are:
+             1  dsx3NoLoopback
+             2  dsx3NearEndPayloadLoopback
+             4  dsx3NearEndLineLoopback
+             8  dsx3NearEndOtherLoopback
+            16  dsx3NearEndInwardLoopback
+            32  dsx3FarEndPayloadLoopback
+            64  dsx3FarEndLineLoopback"
+     ::= { dsx3ConfigEntry 16 }
+
+dsx3Channelization  OBJECT-TYPE
+     SYNTAX      INTEGER {
+                    disabled(1),
+                    enabledDs1(2),
+                    enabledDs2(3)
+                 }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Indicates whether this ds3/e3 is channelized or
+            unchannelized.  The value of enabledDs1 indicates
+
+            that this is a DS3 channelized into DS1s.  The
+            value of enabledDs3 indicated that this is a DS3
+            channelized into DS2s.  Setting this object will
+            cause the creation or deletion of DS2 or DS1
+            entries in the ifTable.  "
+     ::= { dsx3ConfigEntry 17 }
+
+dsx3Ds1ForRemoteLoop  OBJECT-TYPE
+     SYNTAX      INTEGER (0..29)
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+            "Indicates which DS1/E1 on this DS3/E3 will be
+            indicated in the remote ds1 loopback request.  A
+            value of 0 means no DS1 will be looped.  A value
+            of 29 means all DS1s/E1s will be looped."
+     ::= { dsx3ConfigEntry 18 }
+
+-- the DS3/E3 Current Table
+
+dsx3CurrentTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3CurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3/E3 current table contains various
+            statistics being collected for the current 15
+            minute interval."
+     ::= { ds3 6 }
+
+dsx3CurrentEntry OBJECT-TYPE
+     SYNTAX  Dsx3CurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3/E3 Current table."
+     INDEX   { dsx3CurrentIndex }
+     ::= { dsx3CurrentTable 1 }
+
+Dsx3CurrentEntry ::=
+     SEQUENCE {
+         dsx3CurrentIndex           InterfaceIndex,
+         dsx3CurrentPESs            PerfCurrentCount,
+         dsx3CurrentPSESs           PerfCurrentCount,
+         dsx3CurrentSEFSs           PerfCurrentCount,
+         dsx3CurrentUASs            PerfCurrentCount,
+         dsx3CurrentLCVs            PerfCurrentCount,
+         dsx3CurrentPCVs            PerfCurrentCount,
+         dsx3CurrentLESs            PerfCurrentCount,
+         dsx3CurrentCCVs            PerfCurrentCount,
+         dsx3CurrentCESs            PerfCurrentCount,
+         dsx3CurrentCSESs           PerfCurrentCount
+    }
+
+dsx3CurrentIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value which uniquely identifies the
+            DS3/E3 interface to which this entry is
+            applicable.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value an
+            dsx3LineIndex object instance."
+     ::= { dsx3CurrentEntry 1 }
+
+dsx3CurrentPESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Errored Seconds."
+     ::= { dsx3CurrentEntry 2 }
+
+dsx3CurrentPSESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Severely Errored Seconds."
+     ::= { dsx3CurrentEntry 3 }
+
+dsx3CurrentSEFSs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of
+            Severely Errored Framing Seconds."
+     ::= { dsx3CurrentEntry 4 }
+
+dsx3CurrentUASs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of
+            Unavailable Seconds."
+     ::= { dsx3CurrentEntry 5 }
+
+dsx3CurrentLCVs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Line
+            Coding Violations."
+     ::= { dsx3CurrentEntry 6 }
+
+dsx3CurrentPCVs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Coding Violations."
+     ::= { dsx3CurrentEntry 7 }
+
+dsx3CurrentLESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Line Errored Seconds."
+     ::= { dsx3CurrentEntry 8 }
+
+dsx3CurrentCCVs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of C-bit Coding Violations."
+     ::= { dsx3CurrentEntry 9 }
+
+dsx3CurrentCESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of C-bit Errored Seconds."
+     ::= { dsx3CurrentEntry 10 }
+
+dsx3CurrentCSESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of C-bit Severely Errored Seconds."
+     ::= { dsx3CurrentEntry 11 }
+
+-- the DS3/E3 Interval Table
+
+dsx3IntervalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3IntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3/E3 Interval Table contains various
+            statistics collected by each DS3/E3 Interface over
+            the previous 24 hours of operation.  The past 24
+            hours are broken into 96 completed 15 minute
+            intervals.  Each row in this table represents one
+            such interval (identified by dsx3IntervalNumber)
+            and for one specific interface (identified by
+            dsx3IntervalIndex)."
+     ::= { ds3 7 }
+
+dsx3IntervalEntry OBJECT-TYPE
+     SYNTAX  Dsx3IntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3/E3 Interval table."
+     INDEX   { dsx3IntervalIndex, dsx3IntervalNumber }
+     ::= { dsx3IntervalTable 1 }
+
+Dsx3IntervalEntry ::=
+     SEQUENCE {
+         dsx3IntervalIndex           InterfaceIndex,
+         dsx3IntervalNumber          INTEGER,
+         dsx3IntervalPESs            PerfIntervalCount,
+         dsx3IntervalPSESs           PerfIntervalCount,
+         dsx3IntervalSEFSs           PerfIntervalCount,
+         dsx3IntervalUASs            PerfIntervalCount,
+         dsx3IntervalLCVs            PerfIntervalCount,
+         dsx3IntervalPCVs            PerfIntervalCount,
+         dsx3IntervalLESs            PerfIntervalCount,
+         dsx3IntervalCCVs            PerfIntervalCount,
+         dsx3IntervalCESs            PerfIntervalCount,
+         dsx3IntervalCSESs           PerfIntervalCount,
+         dsx3IntervalValidData       TruthValue
+     }
+
+dsx3IntervalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value which uniquely identifies the
+            DS3/E3 interface to which this entry is
+            applicable.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value an
+            dsx3LineIndex object instance."
+     ::= { dsx3IntervalEntry 1 }
+
+dsx3IntervalNumber OBJECT-TYPE
+     SYNTAX  INTEGER (1..96)
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "A number between 1 and 96, where 1 is the most
+            recently completed 15 minute interval and 96 is
+            the 15 minutes interval completed 23 hours and 45
+            minutes prior to interval 1."
+     ::= { dsx3IntervalEntry 2 }
+
+dsx3IntervalPESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Errored Seconds."
+     ::= { dsx3IntervalEntry 3 }
+
+dsx3IntervalPSESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Severely Errored Seconds."
+     ::= { dsx3IntervalEntry 4 }
+
+dsx3IntervalSEFSs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of
+            Severely Errored Framing Seconds."
+     ::= { dsx3IntervalEntry 5 }
+
+dsx3IntervalUASs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of
+            Unavailable Seconds.  This object may decrease if
+            the occurrence of unavailable seconds occurs across
+            an interval boundary."
+     ::= { dsx3IntervalEntry 6 }
+
+dsx3IntervalLCVs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Line
+            Coding Violations."
+     ::= { dsx3IntervalEntry 7 }
+
+dsx3IntervalPCVs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Coding Violations."
+     ::= { dsx3IntervalEntry 8 }
+
+dsx3IntervalLESs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Line Errored  Seconds  (BPVs  or
+            illegal  zero  sequences)."
+     ::= { dsx3IntervalEntry 9 }
+
+ dsx3IntervalCCVs OBJECT-TYPE
+      SYNTAX  PerfIntervalCount
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+             "The number of C-bit Coding Violations."
+      ::= { dsx3IntervalEntry 10 }
+
+ dsx3IntervalCESs OBJECT-TYPE
+      SYNTAX  PerfIntervalCount
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+             "The number of C-bit Errored Seconds."
+      ::= { dsx3IntervalEntry 11 }
+
+ dsx3IntervalCSESs OBJECT-TYPE
+      SYNTAX  PerfIntervalCount
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+             "The number of C-bit Severely Errored Seconds."
+      ::= { dsx3IntervalEntry 12 }
+
+ dsx3IntervalValidData OBJECT-TYPE
+      SYNTAX  TruthValue
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             " This variable indicates if the data for this
+             interval is valid."
+      ::= { dsx3IntervalEntry 13 }
+
+-- the DS3/E3 Total
+
+dsx3TotalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3TotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3/E3 Total Table contains the cumulative
+            sum of the various statistics for the 24 hour
+            period preceding the current interval."
+     ::= { ds3 8 }
+
+dsx3TotalEntry OBJECT-TYPE
+     SYNTAX  Dsx3TotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3/E3 Total table."
+    INDEX   { dsx3TotalIndex }
+     ::= { dsx3TotalTable 1 }
+
+Dsx3TotalEntry ::=
+     SEQUENCE {
+         dsx3TotalIndex      InterfaceIndex,
+         dsx3TotalPESs       PerfTotalCount,
+         dsx3TotalPSESs      PerfTotalCount,
+         dsx3TotalSEFSs      PerfTotalCount,
+         dsx3TotalUASs       PerfTotalCount,
+         dsx3TotalLCVs       PerfTotalCount,
+         dsx3TotalPCVs       PerfTotalCount,
+         dsx3TotalLESs       PerfTotalCount,
+         dsx3TotalCCVs       PerfTotalCount,
+         dsx3TotalCESs       PerfTotalCount,
+         dsx3TotalCSESs      PerfTotalCount
+     }
+
+dsx3TotalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value which uniquely identifies the
+            DS3/E3 interface to which this entry is
+            applicable.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value an
+            dsx3LineIndex object instance."
+     ::= { dsx3TotalEntry 1 }
+
+dsx3TotalPESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Errored Seconds, encountered by a DS3 interface in
+            the previous 24 hour interval. Invalid 15 minute
+            intervals count as 0."
+     ::= { dsx3TotalEntry 2 }
+
+dsx3TotalPSESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+            Severely Errored Seconds, encountered by a DS3
+            interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 3 }
+
+dsx3TotalSEFSs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of
+            Severely Errored Framing Seconds, encountered by a
+            DS3/E3 interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 4 }
+
+dsx3TotalUASs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of
+            Unavailable Seconds, encountered by a DS3
+            interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 5 }
+
+dsx3TotalLCVs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Line
+            Coding Violations encountered by a DS3/E3
+            interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 6 }
+
+dsx3TotalPCVs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of P-bit
+
+            Coding Violations, encountered by a DS3 interface
+            in the previous 24 hour interval. Invalid 15
+            minute intervals count as 0."
+     ::= { dsx3TotalEntry 7 }
+
+dsx3TotalLESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of Line Errored  Seconds  (BPVs  or
+            illegal  zero  sequences) encountered by a DS3/E3
+            interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 8 }
+
+dsx3TotalCCVs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of C-bit Coding Violations encountered
+            by a DS3 interface in the previous 24 hour
+            interval. Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 9 }
+
+dsx3TotalCESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of C-bit Errored Seconds encountered
+            by a DS3 interface in the previous 24 hour
+            interval. Invalid 15 minute intervals count as 0."
+     ::= { dsx3TotalEntry 10 }
+
+dsx3TotalCSESs OBJECT-TYPE
+     SYNTAX  PerfTotalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of C-bit Severely Errored Seconds
+            encountered by a DS3 interface in the previous 24
+            hour interval. Invalid 15 minute intervals count
+            as 0."
+     ::= { dsx3TotalEntry 11 }
+
+-- The DS3 Far End Group
+
+-- The DS3 Far End Group consists of four tables :
+--   DS3 Far End Configuration
+--   DS3 Far End Current
+--   DS3 Far End Interval
+--   DS3 Far End Total
+
+-- The DS3 Far End Configuration Table
+
+dsx3FarEndConfigTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3FarEndConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3 Far End Configuration Table contains
+            configuration information reported in the C-bits
+            from the remote end."
+     ::= { ds3 9 }
+
+dsx3FarEndConfigEntry OBJECT-TYPE
+     SYNTAX  Dsx3FarEndConfigEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3 Far End Configuration table."
+    INDEX   { dsx3FarEndLineIndex }
+     ::= { dsx3FarEndConfigTable 1 }
+
+Dsx3FarEndConfigEntry ::=
+     SEQUENCE {
+        dsx3FarEndLineIndex          InterfaceIndex,
+        dsx3FarEndEquipCode           DisplayString,
+        dsx3FarEndLocationIDCode      DisplayString,
+        dsx3FarEndFrameIDCode         DisplayString,
+        dsx3FarEndUnitCode            DisplayString,
+        dsx3FarEndFacilityIDCode      DisplayString
+     }
+
+dsx3FarEndLineIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value which uniquely identifies the DS3
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+
+            index is the same interface as identified by the
+            same value an dsx3LineIndex object instance."
+    ::= { dsx3FarEndConfigEntry 1 }
+
+dsx3FarEndEquipCode OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..10))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This is the Far End Equipment Identification code
+            that describes the specific piece of equipment.
+            It is sent within the Path Identification
+            Message."
+     ::= { dsx3FarEndConfigEntry 2 }
+
+dsx3FarEndLocationIDCode OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..11))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This is the Far End Location Identification code
+            that describes the specific location of the
+            equipment.  It is sent within the Path
+            Identification Message."
+     ::= { dsx3FarEndConfigEntry 3 }
+
+dsx3FarEndFrameIDCode OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..10))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This is the Far End Frame Identification code
+            that identifies where the equipment is located
+            within a building at a given location.  It is sent
+            within the Path Identification Message."
+     ::= { dsx3FarEndConfigEntry 4 }
+
+dsx3FarEndUnitCode OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..6))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This is the Far End code that identifies the
+            equipment location within a bay.  It is sent
+            within the Path Identification Message."
+     ::= { dsx3FarEndConfigEntry 5 }
+
+dsx3FarEndFacilityIDCode OBJECT-TYPE
+     SYNTAX  DisplayString (SIZE (0..38))
+     MAX-ACCESS  read-write
+     STATUS  current
+     DESCRIPTION
+            "This code identifies a specific Far End DS3 path.
+            It is sent within the Path Identification
+            Message."
+     ::= { dsx3FarEndConfigEntry 6 }
+
+-- The DS3 Far End Current
+
+dsx3FarEndCurrentTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3FarEndCurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3 Far End Current table contains various
+            statistics being collected for the current 15
+            minute interval.  The statistics are collected
+            from the far end block error code within the C-
+            bits."
+     ::= { ds3 10 }
+
+dsx3FarEndCurrentEntry OBJECT-TYPE
+     SYNTAX  Dsx3FarEndCurrentEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3 Far End Current table."
+     INDEX   { dsx3FarEndCurrentIndex }
+     ::= { dsx3FarEndCurrentTable 1 }
+
+Dsx3FarEndCurrentEntry ::=
+     SEQUENCE {
+         dsx3FarEndCurrentIndex        InterfaceIndex,
+         dsx3FarEndTimeElapsed         INTEGER,
+         dsx3FarEndValidIntervals      INTEGER,
+         dsx3FarEndCurrentCESs         PerfCurrentCount,
+         dsx3FarEndCurrentCSESs        PerfCurrentCount,
+         dsx3FarEndCurrentCCVs         PerfCurrentCount,
+         dsx3FarEndCurrentUASs         PerfCurrentCount,
+         dsx3FarEndInvalidIntervals    INTEGER
+    }
+
+ dsx3FarEndCurrentIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value which uniquely identifies the DS3
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is identical to the interface identified by
+            the same value of dsx3LineIndex."
+     ::= { dsx3FarEndCurrentEntry 1 }
+
+dsx3FarEndTimeElapsed OBJECT-TYPE
+     SYNTAX  INTEGER (0..899)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of seconds that have elapsed since the
+            beginning of the far end current error-measurement
+            period. If, for some reason, such as an adjustment
+            in the system's time-of-day clock, the current
+            interval exceeds the maximum value, the agent will
+            return the maximum value."
+     ::= { dsx3FarEndCurrentEntry 2 }
+
+dsx3FarEndValidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The number of previous far end intervals for
+            which data was collected.  The value will be 96
+            unless the interface was brought online within the
+            last 24 hours, in which case the value will be the
+            number of complete 15 minute far end intervals
+            since the interface has been online. In the case
+            where the agent is a proxy, it is possible that
+            some intervals are unavailable.  In this case,
+            this interval is the maximum interval number for
+            which data is available."
+     ::= { dsx3FarEndCurrentEntry 3 }
+
+dsx3FarEndCurrentCESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Errored Seconds."
+     ::= { dsx3FarEndCurrentEntry 4 }
+
+dsx3FarEndCurrentCSESs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Severely Errored Seconds."
+     ::= { dsx3FarEndCurrentEntry 5 }
+
+dsx3FarEndCurrentCCVs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Coding Violations reported via the far end
+            block error count."
+     ::= { dsx3FarEndCurrentEntry 6 }
+
+dsx3FarEndCurrentUASs OBJECT-TYPE
+     SYNTAX  PerfCurrentCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Far End
+            unavailable seconds."
+     ::= { dsx3FarEndCurrentEntry 7 }
+
+dsx3FarEndInvalidIntervals OBJECT-TYPE
+     SYNTAX  INTEGER (0..96)
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            " The number of intervals in the range from 0 to
+            dsx3FarEndValidIntervals for which no data is
+            available.  This object will typically be zero
+            except in cases where the data for some intervals
+            are not available (e.g., in proxy situations)."
+     ::= { dsx3FarEndCurrentEntry 8 }
+
+-- The DS3 Far End Interval Table
+
+dsx3FarEndIntervalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3FarEndIntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3 Far End Interval Table contains various
+
+            statistics collected by each DS3 interface over
+            the previous 24 hours of operation.  The past 24
+            hours are broken into 96 completed 15 minute
+            intervals."
+     ::= { ds3 11 }
+
+dsx3FarEndIntervalEntry OBJECT-TYPE
+     SYNTAX  Dsx3FarEndIntervalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3 Far End Interval table."
+     INDEX   { dsx3FarEndIntervalIndex,
+               dsx3FarEndIntervalNumber }
+     ::= { dsx3FarEndIntervalTable 1 }
+
+Dsx3FarEndIntervalEntry ::=
+     SEQUENCE {
+          dsx3FarEndIntervalIndex      InterfaceIndex,
+          dsx3FarEndIntervalNumber     INTEGER,
+          dsx3FarEndIntervalCESs       PerfIntervalCount,
+          dsx3FarEndIntervalCSESs      PerfIntervalCount,
+          dsx3FarEndIntervalCCVs       PerfIntervalCount,
+          dsx3FarEndIntervalUASs       PerfIntervalCount,
+          dsx3FarEndIntervalValidData  TruthValue
+    }
+
+dsx3FarEndIntervalIndex OBJECT-TYPE
+     SYNTAX  InterfaceIndex
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS  current
+     DESCRIPTION
+            "The index value which uniquely identifies the DS3
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is identical to the interface identified by
+            the same value of dsx3LineIndex."
+     ::= { dsx3FarEndIntervalEntry 1 }
+
+dsx3FarEndIntervalNumber OBJECT-TYPE
+    SYNTAX  INTEGER (1..96)
+    MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+    STATUS  current
+    DESCRIPTION
+            "A number between 1 and 96, where 1 is the most
+            recently completed 15 minute interval and 96 is
+
+            the 15 minutes interval completed 23 hours and 45
+            minutes prior to interval 1."
+    ::= { dsx3FarEndIntervalEntry 2 }
+
+dsx3FarEndIntervalCESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Errored Seconds encountered by a DS3
+            interface in one of the previous 96, individual 15
+            minute, intervals. In the case where the agent is
+            a proxy and data is not available, return
+            noSuchInstance."
+    ::= { dsx3FarEndIntervalEntry 3 }
+
+dsx3FarEndIntervalCSESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Severely Errored Seconds."
+     ::= { dsx3FarEndIntervalEntry 4 }
+
+dsx3FarEndIntervalCCVs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Coding Violations reported via the far end
+            block error count."
+     ::= { dsx3FarEndIntervalEntry 5 }
+
+dsx3FarEndIntervalUASs OBJECT-TYPE
+     SYNTAX  PerfIntervalCount
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            "The counter associated with the number of Far End
+            unavailable seconds."
+     ::= { dsx3FarEndIntervalEntry 6 }
+
+dsx3FarEndIntervalValidData OBJECT-TYPE
+     SYNTAX  TruthValue
+     MAX-ACCESS  read-only
+     STATUS  current
+     DESCRIPTION
+            " This variable indicates if the data for this
+            interval is valid."
+     ::= { dsx3FarEndIntervalEntry 7 }
+
+-- The DS3 Far End Total
+
+dsx3FarEndTotalTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Dsx3FarEndTotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "The DS3 Far End Total Table contains the
+            cumulative sum of the various statistics for the
+            24 hour period preceding the current interval."
+     ::= { ds3 12 }
+
+dsx3FarEndTotalEntry OBJECT-TYPE
+     SYNTAX  Dsx3FarEndTotalEntry
+     MAX-ACCESS  not-accessible
+     STATUS  current
+     DESCRIPTION
+            "An entry in the DS3 Far End Total table."
+     INDEX   { dsx3FarEndTotalIndex }
+     ::= { dsx3FarEndTotalTable 1 }
+
+Dsx3FarEndTotalEntry ::=
+     SEQUENCE {
+         dsx3FarEndTotalIndex       InterfaceIndex,
+         dsx3FarEndTotalCESs        PerfTotalCount,
+         dsx3FarEndTotalCSESs       PerfTotalCount,
+         dsx3FarEndTotalCCVs        PerfTotalCount,
+         dsx3FarEndTotalUASs        PerfTotalCount
+     }
+
+dsx3FarEndTotalIndex OBJECT-TYPE
+    SYNTAX  InterfaceIndex
+    MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+    STATUS  current
+    DESCRIPTION
+            "The index value which uniquely identifies the DS3
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is identical to the interface identified by
+            the same value of dsx3LineIndex."
+    ::= { dsx3FarEndTotalEntry 1 }
+
+dsx3FarEndTotalCESs OBJECT-TYPE
+    SYNTAX  PerfTotalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Errored Seconds encountered by a DS3
+            interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+    ::= { dsx3FarEndTotalEntry 2 }
+
+dsx3FarEndTotalCSESs OBJECT-TYPE
+    SYNTAX  PerfTotalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Severely Errored Seconds encountered by a
+            DS3 interface in the previous 24 hour interval.
+            Invalid 15 minute intervals count as 0."
+    ::= { dsx3FarEndTotalEntry 3 }
+
+dsx3FarEndTotalCCVs OBJECT-TYPE
+    SYNTAX  PerfTotalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The counter associated with the number of Far End
+            C-bit Coding Violations reported via the far end
+            block error count encountered by a DS3 interface
+            in the previous 24 hour interval. Invalid 15
+            minute intervals count as 0."
+    ::= { dsx3FarEndTotalEntry 4 }
+
+dsx3FarEndTotalUASs OBJECT-TYPE
+    SYNTAX  PerfTotalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The counter associated with the number of Far End
+            unavailable seconds encountered by a DS3 interface
+            in the previous 24 hour interval.  Invalid 15
+            minute intervals count as 0."
+    ::= { dsx3FarEndTotalEntry 5 }
+
+-- the DS3/E3 Fractional Table
+
+-- This table is deprecated.
+
+dsx3FracTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dsx3FracEntry
+    MAX-ACCESS  not-accessible
+    STATUS  deprecated
+    DESCRIPTION
+            "This table is deprecated in favour of using
+            ifStackTable.
+
+            Implementation of this table was optional.  It was
+            designed for those systems dividing a DS3/E3 into
+            channels containing different data streams that
+            are of local interest.
+
+            The DS3/E3 fractional table identifies which
+            DS3/E3 channels associated with a CSU are being
+            used to support a logical interface, i.e., an
+            entry in the interfaces table from the Internet-
+            standard MIB.
+
+            For example, consider a DS3 device with 4 high
+            speed links carrying router traffic, a feed for
+            voice, a feed for video, and a synchronous channel
+            for a non-routed protocol.  We might describe the
+            allocation of channels, in the dsx3FracTable, as
+            follows:
+            dsx3FracIfIndex.2. 1 = 3  dsx3FracIfIndex.2.15 = 4
+            dsx3FracIfIndex.2. 2 = 3  dsx3FracIfIndex.2.16 = 6
+            dsx3FracIfIndex.2. 3 = 3  dsx3FracIfIndex.2.17 = 6
+            dsx3FracIfIndex.2. 4 = 3  dsx3FracIfIndex.2.18 = 6
+            dsx3FracIfIndex.2. 5 = 3  dsx3FracIfIndex.2.19 = 6
+            dsx3FracIfIndex.2. 6 = 3  dsx3FracIfIndex.2.20 = 6
+            dsx3FracIfIndex.2. 7 = 4  dsx3FracIfIndex.2.21 = 6
+            dsx3FracIfIndex.2. 8 = 4  dsx3FracIfIndex.2.22 = 6
+            dsx3FracIfIndex.2. 9 = 4  dsx3FracIfIndex.2.23 = 6
+            dsx3FracIfIndex.2.10 = 4  dsx3FracIfIndex.2.24 = 6
+            dsx3FracIfIndex.2.11 = 4  dsx3FracIfIndex.2.25 = 6
+            dsx3FracIfIndex.2.12 = 5  dsx3FracIfIndex.2.26 = 6
+            dsx3FracIfIndex.2.13 = 5  dsx3FracIfIndex.2.27 = 6
+            dsx3FracIfIndex.2.14 = 5  dsx3FracIfIndex.2.28 = 6
+            For dsx3M23, dsx3 SYNTRAN, dsx3CbitParity, and
+            dsx3ClearChannel  there are 28 legal channels,
+            numbered 1 through 28.
+
+            For e3Framed there are 16 legal channels, numbered
+            1 through 16.  The channels (1..16) correspond
+            directly to the equivalently numbered time-slots."
+     ::= { ds3 13 }
+
+dsx3FracEntry OBJECT-TYPE
+     SYNTAX  Dsx3FracEntry
+     MAX-ACCESS  not-accessible
+     STATUS  deprecated
+     DESCRIPTION
+                    "An entry in the DS3 Fractional table."
+    INDEX   { dsx3FracIndex, dsx3FracNumber }
+    ::= { dsx3FracTable 1 }
+
+Dsx3FracEntry ::=
+     SEQUENCE {
+         dsx3FracIndex     INTEGER,
+         dsx3FracNumber    INTEGER,
+         dsx3FracIfIndex   INTEGER
+    }
+
+dsx3FracIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..'7fffffff'h)
+    MAX-ACCESS  read-only -- read-only since originally an
+                              -- SMIv1 index
+    STATUS  deprecated
+    DESCRIPTION
+            "The index value which uniquely identifies  the
+            DS3  interface  to which this entry is applicable
+            The interface identified by a  particular value
+            of  this  index is the same interface as
+            identified by the same value  an  dsx3LineIndex
+            object instance."
+    ::= { dsx3FracEntry 1 }
+
+dsx3FracNumber OBJECT-TYPE
+    SYNTAX  INTEGER (1..31)
+    MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+    STATUS  deprecated
+    DESCRIPTION
+            "The channel number for this entry."
+   ::= { dsx3FracEntry 2 }
+
+dsx3FracIfIndex OBJECT-TYPE
+   SYNTAX  INTEGER (0..'7fffffff'h)
+   MAX-ACCESS  read-write
+   STATUS  deprecated
+   DESCRIPTION
+           "An index value that uniquely identifies an
+           interface.  The interface identified by a
+           particular value of this index is the same
+           interface as  identified by the same value an
+
+           ifIndex object instance. If no interface is
+           currently using a channel, the value should be
+           zero.  If a single interface occupies more  than
+           one  time slot,  that ifIndex value will be found
+           in multiple time slots."
+   ::= { dsx3FracEntry 3 }
+
+ -- DS3 TRAPS
+
+ds3Traps OBJECT IDENTIFIER ::= { ds3 15 }
+
+dsx3LineStatusChange NOTIFICATION-TYPE
+    OBJECTS { dsx3LineStatus,
+              dsx3LineStatusLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A dsx3LineStatusChange trap is sent when the
+            value of an instance of dsx3LineStatus changes. It
+            can be utilized by an NMS to trigger polls.  When
+            the line status change results in a lower level
+            line status change (i.e., ds1), then no traps for
+            the lower level are sent."
+     ::= { ds3Traps 0 1 }
+
+-- conformance information
+
+ds3Conformance OBJECT IDENTIFIER ::= { ds3 14 }
+ds3Groups      OBJECT IDENTIFIER ::= { ds3Conformance 1 }
+ds3Compliances OBJECT IDENTIFIER ::= { ds3Conformance 2 }
+
+-- compliance statements
+
+ds3Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for DS3/E3 interfaces."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ds3NearEndConfigGroup,
+                           ds3NearEndStatisticsGroup }
+
+        GROUP       ds3FarEndGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS3 Interface.  However,
+            only C-bit Parity and SYNTRAN DS3 applications
+            have the capability (option) of providing this
+            information."
+        GROUP       ds3NearEndOptionalTrapGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS3 Interface.  If it is
+            implemented then ds3NearEndOptionalConfigGroup
+            should also be implemented."
+        GROUP       ds3NearEndOptionalConfigGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all
+            systems that attach to a DS3 interface."
+
+        OBJECT      dsx3LineType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for the line type is not required."
+
+        OBJECT      dsx3LineCoding
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for the line coding is not
+            required."
+
+        OBJECT      dsx3SendCode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for the send code is not required."
+
+        OBJECT      dsx3LoopbackConfig
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for loopbacks is not required."
+
+        OBJECT      dsx3TransmitClockSource
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for the transmit clock source is not
+            required."
+
+        OBJECT      dsx3LineLength
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for the line length is not
+            required."
+
+        OBJECT      dsx3Channelization
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access for the channelization is not
+            required."
+    ::= { ds3Compliances 1 }
+
+-- units of conformance
+
+ds3NearEndConfigGroup  OBJECT-GROUP
+    OBJECTS { dsx3LineIndex,
+              dsx3TimeElapsed,
+              dsx3ValidIntervals,
+              dsx3LineType,
+              dsx3LineCoding,
+              dsx3SendCode,
+              dsx3CircuitIdentifier,
+              dsx3LoopbackConfig,
+              dsx3LineStatus,
+              dsx3TransmitClockSource,
+              dsx3InvalidIntervals,
+              dsx3LineLength,
+              dsx3LoopbackStatus,
+              dsx3Channelization,
+              dsx3Ds1ForRemoteLoop}
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all DS3/E3 interfaces."
+    ::= { ds3Groups 1 }
+
+ds3NearEndStatisticsGroup OBJECT-GROUP
+    OBJECTS { dsx3CurrentIndex,
+              dsx3CurrentPESs,
+              dsx3CurrentPSESs,
+              dsx3CurrentSEFSs,
+              dsx3CurrentUASs,
+              dsx3CurrentLCVs,
+              dsx3CurrentPCVs,
+              dsx3CurrentLESs,
+              dsx3CurrentCCVs,
+              dsx3CurrentCESs,
+              dsx3CurrentCSESs,
+              dsx3IntervalIndex,
+              dsx3IntervalNumber,
+              dsx3IntervalPESs,
+              dsx3IntervalPSESs,
+              dsx3IntervalSEFSs,
+              dsx3IntervalUASs,
+              dsx3IntervalLCVs,
+              dsx3IntervalPCVs,
+              dsx3IntervalLESs,
+              dsx3IntervalCCVs,
+              dsx3IntervalCESs,
+              dsx3IntervalCSESs,
+              dsx3IntervalValidData,
+              dsx3TotalIndex,
+              dsx3TotalPESs,
+              dsx3TotalPSESs,
+              dsx3TotalSEFSs,
+              dsx3TotalUASs,
+              dsx3TotalLCVs,
+              dsx3TotalPCVs,
+              dsx3TotalLESs,
+              dsx3TotalCCVs,
+              dsx3TotalCESs,
+              dsx3TotalCSESs }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing statistics
+            information applicable to all DS3/E3 interfaces."
+    ::= { ds3Groups 2 }
+
+ds3FarEndGroup  OBJECT-GROUP
+    OBJECTS { dsx3FarEndLineIndex,
+              dsx3FarEndEquipCode,
+              dsx3FarEndLocationIDCode,
+              dsx3FarEndFrameIDCode,
+              dsx3FarEndUnitCode,
+              dsx3FarEndFacilityIDCode,
+              dsx3FarEndCurrentIndex,
+              dsx3FarEndTimeElapsed,
+              dsx3FarEndValidIntervals,
+              dsx3FarEndCurrentCESs,
+              dsx3FarEndCurrentCSESs,
+              dsx3FarEndCurrentCCVs,
+              dsx3FarEndCurrentUASs,
+              dsx3FarEndInvalidIntervals,
+              dsx3FarEndIntervalIndex,
+              dsx3FarEndIntervalNumber,
+              dsx3FarEndIntervalCESs,
+              dsx3FarEndIntervalCSESs,
+              dsx3FarEndIntervalCCVs,
+              dsx3FarEndIntervalUASs,
+              dsx3FarEndIntervalValidData,
+              dsx3FarEndTotalIndex,
+              dsx3FarEndTotalCESs,
+              dsx3FarEndTotalCSESs,
+              dsx3FarEndTotalCCVs,
+              dsx3FarEndTotalUASs }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing remote
+            configuration and statistics information
+            applicable to C-bit Parity and SYNTRAN DS3
+            interfaces."
+    ::= { ds3Groups 3 }
+
+ds3DeprecatedGroup OBJECT-GROUP
+
+    OBJECTS { dsx3IfIndex,
+              dsx3FracIndex,
+              dsx3FracNumber,
+              dsx3FracIfIndex }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of obsolete objects that may be
+            implemented for backwards compatibility."
+    ::= { ds3Groups 4 }
+
+ds3NearEndOptionalConfigGroup OBJECT-GROUP
+    OBJECTS { dsx3LineStatusLastChange,
+              dsx3LineStatusChangeTrapEnable }
+    STATUS    current
+    DESCRIPTION
+            "A collection of objects that may be implemented
+            on DS3/E3 interfaces."
+    ::= { ds3Groups 5 }
+
+ds3NearEndOptionalTrapGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { dsx3LineStatusChange }
+    STATUS    current
+    DESCRIPTION
+            "A collection of notifications that may be
+            implemented on DS3/E3 interfaces."
+    ::= { ds3Groups 6 }
+
+END
diff --git a/snmp_builder/mibs/DSA-MIB.mib b/snmp_builder/mibs/DSA-MIB.mib
new file mode 100644
index 0000000..01a19a0
--- /dev/null
+++ b/snmp_builder/mibs/DSA-MIB.mib
@@ -0,0 +1,642 @@
+DSA-MIB DEFINITIONS ::= BEGIN
+
+        IMPORTS
+          MODULE-IDENTITY,  OBJECT-TYPE,
+          NOTIFICATION-TYPE
+                     FROM SNMPv2-SMI
+          DisplayString,    TimeStamp,
+          TEXTUAL-CONVENTION
+                     FROM SNMPv2-TC
+          mib-2
+                     FROM RFC1213-MIB
+          applIndex, DistinguishedName
+                     FROM NETWORK-SERVICES-MIB;
+
+        dsaMIB MODULE-IDENTITY
+           LAST-UPDATED "9311250000Z"
+           ORGANIZATION "IETF Mail and Directory Management Working
+                         Group"
+
+           CONTACT-INFO
+             "        Glenn Mansfield
+
+              Postal: AIC Systems Laboratory
+                      6-6-3, Minami Yoshinari
+                      Aoba-ku, Sendai, 989-32
+                      JP
+
+              Tel:    +81 22 279 3310
+              Fax:    +81 22 279 3640
+              E-Mail: glenn@aic.co.jp"
+         DESCRIPTION
+            " The MIB module for monitoring Directory System Agents."
+         ::= { mib-2 29 }
+
+        dsaOpsTable OBJECT-TYPE
+            SYNTAX SEQUENCE OF DsaOpsEntry
+            MAX-ACCESS not-accessible
+            STATUS current
+            DESCRIPTION
+              " The table holding information related to the
+                DSA operations."
+            ::= {dsaMIB 1}
+
+        dsaOpsEntry OBJECT-TYPE
+            SYNTAX DsaOpsEntry
+            MAX-ACCESS not-accessible
+            STATUS current
+            DESCRIPTION
+              " Entry containing operations related statistics
+                for a DSA."
+            INDEX { applIndex }
+            ::= {dsaOpsTable 1}
+
+        DsaOpsEntry ::= SEQUENCE {
+
+ -- Bindings
+            dsaAnonymousBinds
+                Counter32,
+            dsaUnauthBinds
+                Counter32,
+            dsaSimpleAuthBinds
+                Counter32,
+            dsaStrongAuthBinds
+                Counter32,
+            dsaBindSecurityErrors
+                Counter32,
+ -- In-coming operations
+
+            dsaInOps
+                Counter32,
+            dsaReadOps
+                Counter32,
+            dsaCompareOps
+                Counter32,
+            dsaAddEntryOps
+                Counter32,
+            dsaRemoveEntryOps
+                Counter32,
+            dsaModifyEntryOps
+                Counter32,
+            dsaModifyRDNOps
+                Counter32,
+            dsaListOps
+                Counter32,
+            dsaSearchOps
+                Counter32,
+            dsaOneLevelSearchOps
+                Counter32,
+            dsaWholeTreeSearchOps
+                Counter32,
+ -- Out going operations
+
+            dsaReferrals
+                Counter32,
+            dsaChainings
+                Counter32,
+ -- Errors
+
+            dsaSecurityErrors
+                Counter32,
+            dsaErrors
+                Counter32
+        }
+
+        dsaAnonymousBinds OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of anonymous  binds to this DSA from DUAs
+                since application start."
+            ::= {dsaOpsEntry 1}
+
+        dsaUnauthBinds OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of un-authenticated binds to this
+                DSA since application start."
+            ::= {dsaOpsEntry 2}
+
+        dsaSimpleAuthBinds OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of binds to this DSA that were authenticated
+                using simple authentication procedures since
+                application start."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 8.1.2.1.1."
+            ::= {dsaOpsEntry 3}
+
+        dsaStrongAuthBinds OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of binds to this DSA that were authenticated
+                using the strong authentication procedures since
+                application start. This includes the binds that were
+                authenticated using external authentication procedures."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Sections 8.1.2.1.2 &  8.1.2.1.3."
+            ::= {dsaOpsEntry 4}
+
+        dsaBindSecurityErrors OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of bind operations that have been rejected
+                by this DSA due to inappropriateAuthentication or
+                invalidCredentials."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 12.7.2"
+            ::= {dsaOpsEntry 5}
+
+        dsaInOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of operations forwarded to this DSA
+                from DUAs or other DSAs since application
+                start up."
+            ::= {dsaOpsEntry 6}
+
+        dsaReadOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of read operations serviced by
+                this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 9.1."
+            ::= {dsaOpsEntry 7}
+
+        dsaCompareOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of compare operations serviced by
+                this DSA  since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 9.2."
+            ::= {dsaOpsEntry 8}
+
+        dsaAddEntryOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of addEntry operations serviced by
+                this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 11.1."
+            ::= {dsaOpsEntry 9}
+
+        dsaRemoveEntryOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of removeEntry operations serviced by
+                this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 11.2."
+            ::= {dsaOpsEntry 10}
+
+        dsaModifyEntryOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of modifyEntry operations serviced by
+                this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 11.3."
+            ::= {dsaOpsEntry 11}
+
+        dsaModifyRDNOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of modifyRDN operations serviced by
+                this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 11.4."
+            ::= {dsaOpsEntry 12}
+
+        dsaListOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of list operations serviced by
+                this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 10.1."
+            ::= {dsaOpsEntry 13}
+
+        dsaSearchOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of search operations- baseObjectSearches,
+                oneLevelSearches and  subTreeSearches, serviced
+                by this DSA  since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 10.2."
+            ::= {dsaOpsEntry 14}
+
+        dsaOneLevelSearchOps OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of oneLevelSearch operations serviced
+                by this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 10.2.2.2."
+            ::= {dsaOpsEntry 15}
+
+        dsaWholeTreeSearchOps   OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of wholeTreeSearch operations serviced
+                by this DSA since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 10.2.2.2."
+            ::= {dsaOpsEntry 16}
+
+        dsaReferrals OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of referrals returned by this DSA in response
+                to requests for operations since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 12.6."
+            ::= {dsaOpsEntry 17}
+
+        dsaChainings OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of operations forwarded by this DSA
+                to other DSAs since application startup."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.518, 1988:
+                Section 14."
+            ::= {dsaOpsEntry 18}
+
+        dsaSecurityErrors OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of operations forwarded to this DSA
+                which did not meet the security requirements. "
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Section 12.7."
+            ::= {dsaOpsEntry 19}
+
+        dsaErrors        OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of operations that could not be serviced
+                due to errors other than security errors, and
+                referrals.
+                A partially serviced operation will not be counted
+                as an error.
+                The errors include NameErrors, UpdateErrors, Attribute
+                errors and ServiceErrors."
+            REFERENCE
+              " CCITT Blue Book Fascicle VIII.8 - Rec. X.511, 1988:
+                Sections 12.4, 12.5, 12.8 & 12.9."
+            ::= {dsaOpsEntry 20}
+
+ -- Entry statistics/Cache performance
+        dsaEntriesTable OBJECT-TYPE
+            SYNTAX SEQUENCE OF DsaEntriesEntry
+            MAX-ACCESS not-accessible
+            STATUS current
+            DESCRIPTION
+              " The table holding information related to the
+
+                entry statistics and cache performance of the DSAs."
+            ::= {dsaMIB 2}
+
+        dsaEntriesEntry OBJECT-TYPE
+            SYNTAX DsaEntriesEntry
+            MAX-ACCESS not-accessible
+            STATUS current
+            DESCRIPTION
+              " Entry containing statistics pertaining to entries
+                held by a DSA."
+            INDEX { applIndex }
+            ::= {dsaEntriesTable 1}
+
+        DsaEntriesEntry ::= SEQUENCE {
+            dsaMasterEntries
+                Gauge32,
+            dsaCopyEntries
+                Gauge32,
+            dsaCacheEntries
+                Gauge32,
+            dsaCacheHits
+                Counter32,
+            dsaSlaveHits
+                Counter32
+        }
+
+        dsaMasterEntries OBJECT-TYPE
+            SYNTAX Gauge32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of entries mastered in the DSA."
+            ::= {dsaEntriesEntry 1}
+
+        dsaCopyEntries OBJECT-TYPE
+            SYNTAX Gauge32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of entries for which systematic (slave)
+                copies are maintained in the DSA."
+            ::= {dsaEntriesEntry 2}
+
+        dsaCacheEntries OBJECT-TYPE
+            SYNTAX Gauge32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of entries cached (non-systematic copies) in
+                the DSA. This will include the entries that are
+                cached partially. The negative cache is not counted."
+            ::= {dsaEntriesEntry 3}
+
+        dsaCacheHits OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of operations that were serviced from
+                the locally held cache since application
+                startup."
+            ::= {dsaEntriesEntry 4}
+
+        dsaSlaveHits  OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Number of operations that were serviced from
+                the locally held object replications [ shadow
+                entries] since application startup."
+            ::= {dsaEntriesEntry 5}
+
+ -- The dsaIntTable contains statistical data on the peer DSAs
+ -- with which the monitored DSAs [attempt to] interact.  This
+ -- table  will provide a useful insight into  the   effect of
+ -- neighbours on the DSA performance.
+ -- The table keeps track of the last "N" DSAs with which  the
+ -- monitored  DSAs  has  interacted  [attempted to interact],
+ -- where "N" is a locally-defined constant.
+
+          dsaIntTable OBJECT-TYPE
+                  SYNTAX  SEQUENCE OF DsaIntEntry
+                  MAX-ACCESS  not-accessible
+                  STATUS  current
+                  DESCRIPTION
+                    " Each row of this table contains some details
+                      related to the history of the interaction
+                      of the monitored DSAs with their respective
+                      peer DSAs."
+                  ::= { dsaMIB 3 }
+
+          dsaIntEntry OBJECT-TYPE
+                  SYNTAX  DsaIntEntry
+                  MAX-ACCESS  not-accessible
+                  STATUS  current
+                  DESCRIPTION
+                    " Entry containing interaction details of a DSA
+                      with a peer DSA."
+                  INDEX { applIndex,dsaIntIndex }
+                  ::= { dsaIntTable 1 }
+
+          DsaIntEntry ::= SEQUENCE {
+              dsaIntIndex
+                  INTEGER,
+              dsaName
+                  DistinguishedName,
+              dsaTimeOfCreation
+                  TimeStamp,
+              dsaTimeOfLastAttempt
+                  TimeStamp,
+              dsaTimeOfLastSuccess
+                  TimeStamp,
+              dsaFailuresSinceLastSuccess
+                  Counter32,
+              dsaFailures
+                  Counter32,
+              dsaSuccesses
+                  Counter32
+          }
+
+        dsaIntIndex  OBJECT-TYPE
+            SYNTAX INTEGER (1..2147483647)
+            MAX-ACCESS not-accessible
+            STATUS current
+            DESCRIPTION
+              " Together with applIndex it forms the unique key to
+                identify the conceptual row which contains useful info
+                on the (attempted) interaction between the DSA (referred
+                to by applIndex) and a peer DSA."
+            ::= {dsaIntEntry 1}
+
+        dsaName  OBJECT-TYPE
+            SYNTAX DistinguishedName
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Distinguished Name of the peer DSA to which this
+                entry pertains."
+            ::= {dsaIntEntry 2}
+
+        dsaTimeOfCreation  OBJECT-TYPE
+            SYNTAX TimeStamp
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " The value of sysUpTime when this row was created.
+                If the entry was created before the network management
+                subsystem was initialized, this object will contain
+                a value of zero."
+            ::= {dsaIntEntry 3}
+
+        dsaTimeOfLastAttempt  OBJECT-TYPE
+            SYNTAX TimeStamp
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " The value of sysUpTime when the last attempt was made
+                to contact this DSA. If the last attempt was made before
+                the network management subsystem was initialized, this
+                object will contain a value of zero."
+            ::= {dsaIntEntry 4}
+
+        dsaTimeOfLastSuccess  OBJECT-TYPE
+            SYNTAX TimeStamp
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " The value of sysUpTime when the last attempt made to
+                contact this DSA was successful. If there have
+                been no successful attempts this entry will have a value
+                of zero. If the last successful attempt was made before
+                the network management subsystem was initialized, this
+                object will contain a value of zero."
+            ::= {dsaIntEntry 5}
+
+        dsaFailuresSinceLastSuccess  OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " The number of failures since the last time an
+                attempt to contact this DSA was successful. If
+                there has been no successful attempts, this counter
+                will contain the number of failures since this entry
+                was created."
+            ::= {dsaIntEntry 6}
+
+        dsaFailures  OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Cumulative failures since the creation of
+                this entry."
+            ::= {dsaIntEntry 7}
+
+        dsaSuccesses  OBJECT-TYPE
+            SYNTAX Counter32
+            MAX-ACCESS read-only
+            STATUS current
+            DESCRIPTION
+              " Cumulative successes since the creation of
+                this entry."
+            ::= {dsaIntEntry 8}
+
+ -- Conformance information
+
+        dsaConformance OBJECT IDENTIFIER ::= { dsaMIB 4 }
+
+        dsaGroups      OBJECT IDENTIFIER ::= { dsaConformance 1 }
+        dsaCompliances OBJECT IDENTIFIER ::= { dsaConformance 2 }
+
+ -- Compliance statements
+
+        dsaOpsCompliance MODULE-COMPLIANCE
+            STATUS  current
+            DESCRIPTION
+                    "The compliance statement for SNMPv2 entities
+                    which implement the DSA-MIB for monitoring
+                    DSA operations."
+
+            MODULE  -- this module
+                MANDATORY-GROUPS { dsaOpsGroup }
+            ::= { dsaCompliances 1 }
+
+        dsaEntryCompliance MODULE-COMPLIANCE
+            STATUS  current
+            DESCRIPTION
+                    "The compliance statement for SNMPv2 entities
+                    which implement the DSA-MIB for monitoring
+                    DSA operations,  entry statistics and cache
+                    performance."
+
+            MODULE  -- this module
+                MANDATORY-GROUPS { dsaOpsGroup,dsaEntryGroup }
+            ::= { dsaCompliances 2 }
+
+        dsaIntCompliance MODULE-COMPLIANCE
+            STATUS  current
+            DESCRIPTION
+                    " The compliance statement  for SNMPv2  entities
+                      which implement the DSA-MIB for monitoring DSA
+                      operations and the interaction of the DSA with
+                      peer DSAs."
+
+            MODULE  -- this module
+                MANDATORY-GROUPS { dsaOpsGroup, dsaIntGroup }
+            ::= { dsaCompliances 3 }
+
+ -- Units of conformance
+
+        dsaOpsGroup    OBJECT-GROUP
+            OBJECTS {
+              dsaAnonymousBinds,  dsaUnauthBinds,       dsaSimpleAuthBinds,
+              dsaStrongAuthBinds, dsaBindSecurityErrors,dsaInOps,
+              dsaReadOps,         dsaCompareOps,        dsaAddEntryOps,
+              dsaRemoveEntryOps,  dsaModifyEntryOps,    dsaModifyRDNOps,
+              dsaListOps,         dsaSearchOps,         dsaOneLevelSearchOps,
+              dsaWholeTreeSearchOps,dsaReferrals,       dsaChainings,
+              dsaSecurityErrors,  dsaErrors}
+            STATUS  current
+            DESCRIPTION
+                    " A collection of objects for monitoring the DSA
+                      operations."
+            ::= { dsaGroups 1 }
+
+        dsaEntryGroup    OBJECT-GROUP
+            OBJECTS {dsaMasterEntries,   dsaCopyEntries,       dsaCacheEntries,
+                     dsaCacheHits,       dsaSlaveHits}
+            STATUS  current
+            DESCRIPTION
+                    " A collection of objects for monitoring the DSA
+                      entry statistics and cache performance."
+            ::= { dsaGroups 2 }
+
+        dsaIntGroup    OBJECT-GROUP
+            OBJECTS {
+              dsaName,             dsaTimeOfCreation, dsaTimeOfLastAttempt,
+              dsaTimeOfLastSuccess,dsaFailuresSinceLastSuccess,dsaFailures,
+              dsaSuccesses}
+            STATUS  current
+            DESCRIPTION
+                    " A collection of objects for monitoring the DSA's
+                      interaction with peer DSAs."
+            ::= { dsaGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/DSMON-MIB.mib b/snmp_builder/mibs/DSMON-MIB.mib
new file mode 100644
index 0000000..89c0704
--- /dev/null
+++ b/snmp_builder/mibs/DSMON-MIB.mib
@@ -0,0 +1,4449 @@
+DSMON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+        Counter32, Gauge32
+                FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF
+        RowStatus, TimeStamp, TEXTUAL-CONVENTION, TruthValue
+                FROM SNMPv2-TC
+        OwnerString, rmon
+                FROM RMON-MIB
+        protocolDirLocalIndex, LastCreateTime,
+        DataSource, ZeroBasedCounter32, TimeFilter
+                FROM RMON2-MIB
+        CounterBasedGauge64, ZeroBasedCounter64
+                FROM HCNUM-TC
+        SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB
+        Dscp
+                FROM DIFFSERV-DSCP-TC;
+
+dsmonMIB MODULE-IDENTITY
+    LAST-UPDATED    "200205310000Z"
+    ORGANIZATION    "IETF RMONMIB Working Group"
+    CONTACT-INFO
+            "        Andy Bierman
+                     Cisco Systems, Inc.
+                     RMONMIB WG Chair and DSMON MIB Editor
+
+             Postal: 170 West Tasman Drive
+                     San Jose, CA USA 95134
+                Tel: +1 408 527-3711
+             E-mail: abierman@cisco.com
+
+             Send comments to <rmonmib@ietf.org>
+             Mailing list subscription info:
+                 http://www.ietf.org/mailman/listinfo/rmonmib "
+    DESCRIPTION
+            "This module defines Remote Monitoring MIB extensions for
+            Differentiated Services enabled networks.
+
+             RMON DIFFSERV DSCP statistics
+              * Per Counter Aggregation Group
+              * Per Protocol Per Counter Aggregation Group
+              * Per Counter Aggregation Group Per Host
+
+              * Per Counter Aggregation Group Per Host-Pair
+
+            In order to maintain the RMON 'look-and-feel' and semantic
+            consistency, some of the text from the RMON-2 and HC-RMON
+            MIBs by Steve Waldbusser has been adapted for use in this
+            MIB."
+    REVISION        "200205310000Z"
+    DESCRIPTION
+            "Initial version of the DSMON MIB module.  This version
+            published as RFC 3287."
+    ::= { rmon 26 }
+
+dsmonObjects       OBJECT IDENTIFIER ::= { dsmonMIB 1 }
+dsmonNotifications OBJECT IDENTIFIER ::= { dsmonMIB 2 }
+dsmonConformance   OBJECT IDENTIFIER ::= { dsmonMIB 3 }
+
+dsmonAggObjects    OBJECT IDENTIFIER ::= { dsmonObjects 1 }
+dsmonStatsObjects  OBJECT IDENTIFIER ::= { dsmonObjects 2 }
+dsmonPdistObjects  OBJECT IDENTIFIER ::= { dsmonObjects 3 }
+dsmonHostObjects   OBJECT IDENTIFIER ::= { dsmonObjects 4 }
+dsmonCapsObjects   OBJECT IDENTIFIER ::= { dsmonObjects 5 }
+dsmonMatrixObjects OBJECT IDENTIFIER ::= { dsmonObjects 6 }
+
+--
+-- Textual Convention to define a
+-- DSMON Counter Aggregation Group Index
+--
+
+DsmonCounterAggGroupIndex ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "This TC describes a data type which identifies a DSMON
+            counter aggregation group, which is an arbitrary grouping of
+            conceptual counters, for monitoring purposes only.  The
+            range for this data type begins with zero (instead of
+            one), to allow for a direct mapping between counter
+            indexing schemes that start at zero (e.g. DSCP values in
+            packets) and counter aggregation group values."
+    SYNTAX Integer32 (0..2147483647)
+
+--
+-- Textual Convention to define a
+-- DSMON Counter Aggregation Profile Index
+--
+
+DsmonCounterAggProfileIndex ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "This TC describes a data type which identifies a DSMON
+            counter aggregation profile, which is a set of counter
+            aggregation group assignments for each of the 64 DSCP
+            values, for a particular statistical collection."
+    SYNTAX Integer32 (1..2147483647)
+
+-- ***********************************************************
+-- *                                                         *
+-- *           D S M O N    C A P A B I L I T I E S          *
+-- *                                                         *
+-- ***********************************************************
+
+dsmonCapabilities OBJECT-TYPE
+    SYNTAX      BITS  {
+                       dsmonCounterAggControl(0),
+                       dsmonStats(1),
+                       dsmonStatsOvfl(2),
+                       dsmonStatsHC(3),
+                       dsmonPdist(4),
+                       dsmonPdistOvfl(5),
+                       dsmonPdistHC(6),
+                       dsmonHost(7),
+                       dsmonHostOvfl(8),
+                       dsmonHostHC(9),
+                       dsmonCaps(10),
+                       dsmonMatrix(11),
+                       dsmonMatrixOvfl(12),
+                       dsmonMatrixHC(13)
+                      }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object provides an indication of the DSMON groups
+            supported by the agent.  If a bit is set, then the agent
+            implements all of the objects in the DSMON object group,
+            where bit 'n' represents the MIB group identified by the
+            OBJECT IDENTIFIER value { dsmonGroups n+1 }."
+    ::= { dsmonCapsObjects 1 }
+
+-- ***********************************************************
+-- *                                                         *
+-- *   A G G R E G A T I O N   C O N T R O L   G R O U P S   *
+-- *                                                         *
+-- ***********************************************************
+
+dsmonMaxAggGroups OBJECT-TYPE
+    SYNTAX      Integer32 (2..64)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of counter aggregation groups that this
+            agent can support.  The agent will allow this number of
+            distinct groups to be configured in the
+            dsmonAggProfileTable, numbered from '0' to
+            'dsmonMaxAggGroups - 1', for each counter aggregation
+            profile entry supported by the agent.
+
+            The agent MUST NOT lower this value during system operation,
+            and SHOULD set this object to an appropriate value during
+            system initialization."
+    ::= { dsmonAggObjects 1 }
+
+dsmonAggControlLocked OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Controls the setup of counter aggregation groups for this
+            agent.
+
+            If this object contains the value 'true', then write access
+            to the objects in the dsmonAggControlTable (except the
+            dsmonAggControlOwner object), dsmonAggProfileTable, and
+            dsmonAggGroupTable is not permitted, and data collection is
+            possible.  This object only controls write access to these
+            MIB objects.  The DSMON data collection control tables
+            (e.g., dsmonHostCtlTable) can be configured at any time,
+            regardless of the value of this object.
+
+            If this object contains the value 'false', write access to
+            the objects in the dsmonAggControlTable,
+            dsmonAggProfileTable, and dsmonAggGroupTable is permitted,
+            and data collection is not possible.  In addition, all
+            objects in all DSMON data tables (e.g., dsmonStatsTable)
+            shall be deleted.
+
+            An agent is not required to process SNMP Set Requests for
+            this object in conjunction with other objects from this MIB.
+            This is intended to simplify the processing of Set Requests
+            for tables such as the dsmonAggProfileTable, by eliminating
+            the possibility that a single Set PDU will contain multiple
+            varbinds which are in conflict, such as a PDU which both
+            modifies the dsmonAggProfileTable and locks the
+
+            dsmonAggProfileTable at the same time.
+
+            Note that the agent is not required to validate the entire
+            counter aggregation configuration when an attempt is made to
+            transition an instance of this object from 'true' to
+            'false'.  That validation is done if and when a DSMON data
+            collection is activated.
+
+            An agent is required to reactivate any suspended data
+            collections when this object transitions to 'true', Each
+            active data control entry (e.g., dsmonStatsControlEntry),
+            will be validated with respect to the new counter
+            aggregation configuration.  If the counter aggregation
+            profile referenced in the data collection is valid, then
+            that collection will be restarted.  Otherwise, the RowStatus
+            object (e.g., dsmonStatsControlStatus) will be set to
+            'notReady' for that collection control entry."
+    ::= { dsmonAggObjects 2 }
+
+dsmonAggControlChanges OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object counts the number of times the value of the
+            dsmonAggControlLocked object has changed.  A management
+            station can use this object to detect if counters in the
+            DSMON data tables (e.g., dsmonStatsEntry) have been deleted
+            and recreated between polls.
+
+            This object shall be incremented by one each time the
+            dsmonAggControlLocked object changes from 'false' to 'true',
+            or from 'true' to 'false'."
+    ::= { dsmonAggObjects 3 }
+
+dsmonAggControlLastChangeTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the value of sysUpTime at the moment
+            the dsmonAggControlLocked object was last modified.  A
+            management station can use this object to detect if counters
+            in the DSMON data tables (e.g., dsmonStatsEntry) have been
+            deleted and recreated between polls.
+
+            This object shall be updated with the current value of
+            sysUpTime, if the dsmonAggControlLocked object changes from
+
+            'false' to 'true', or from 'true' to 'false'.
+
+            Upon system initialization, this object shall contain the
+            value zero."
+    ::= { dsmonAggObjects 4 }
+
+--
+-- Counter Aggregation Control Table
+--
+
+dsmonAggControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonAggControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table provides an overall description and control
+            point for all dsmonAggProfileEntries with the same
+            dsmonAggControlIndex value.
+
+            A management application SHOULD create a counter aggregation
+            profile by first creating and activating an entry in this
+            table.  This will cause the agent to create a set of 64
+            dsmonAggProfileEntries on behalf of this control entry.  An
+            application can then set the individual counter aggregation
+            group assignments for each of the 64 DSCP values,
+            This table MUST NOT be modified if the dsmonAggControlLocked
+            object is equal to 'true'.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table, and
+            (independently) the number of counter aggregation profiles
+            which may be applied to a particular data source.  In this
+            case, the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905].
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.  Otherwise, each
+            potential counter aggregation group description string
+            SHOULD contain the empty string."
+    ::= { dsmonAggObjects 5 }
+
+dsmonAggControlEntry OBJECT-TYPE
+    SYNTAX      DsmonAggControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonAggControlTable."
+    INDEX { dsmonAggControlIndex }
+    ::= { dsmonAggControlTable 1 }
+
+DsmonAggControlEntry ::= SEQUENCE {
+    dsmonAggControlIndex         DsmonCounterAggProfileIndex,
+    dsmonAggControlDescr         SnmpAdminString,
+    dsmonAggControlOwner         OwnerString,
+    dsmonAggControlStatus        RowStatus
+}
+
+dsmonAggControlIndex OBJECT-TYPE
+    SYNTAX      DsmonCounterAggProfileIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary integer index value used to identify the
+            counter aggregation profile specified by this control
+            entry."
+    ::= { dsmonAggControlEntry 1 }
+
+dsmonAggControlDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..64))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An administratively assigned description of the counter
+            aggregation profile identified by this entry.
+
+            Upon first creation of an instance of this object, the agent
+            SHOULD set this object to the empty string.  If the agent
+            supports non-volatile storage, then this object SHOULD be
+            re-initialized with its stored value after a system reboot.
+
+            This object MUST NOT be modified if the associated
+            dsmonAggControlStatus object is equal to 'active', or the
+            dsmonAggControlLocked object is equal to 'true'."
+    ::= { dsmonAggControlEntry 2 }
+
+dsmonAggControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonAggControlEntry 3 }
+
+dsmonAggControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this row.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            Upon setting this object to active(1), the agent will create
+            a complete set of 64 associated entries in the
+            dsmonAggProfileTable.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonAggProfileTable shall be deleted.
+
+            This object MUST NOT be modified if the
+            dsmonAggControlLocked object is equal to 'true'."
+    ::= { dsmonAggControlEntry 4 }
+
+--
+-- Counter Aggregation Profile Table
+--
+
+dsmonAggProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonAggProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Controls the setup of counter aggregation profiles for this
+            agent.  For each such profile, every DSCP value MUST be
+            configured into exactly one counter aggregation group.
+
+            This table MUST NOT be modified if the dsmonAggControlLocked
+            object is equal to 'true'.
+
+            The agent will create a set of 64 entries in this table
+            (with the same dsmonAggControlIndex value) when the
+            associated dsmonAggControlEntry is activated.
+
+            If the agent supports non-volatile configuration of this
+            table, then upon system initialization, this table SHOULD be
+            initialized with the saved values."
+    ::= { dsmonAggObjects 6 }
+
+dsmonAggProfileEntry OBJECT-TYPE
+    SYNTAX      DsmonAggProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonAggProfileTable.  The
+            dsmonAggControlIndex value in the index identifies the
+            dsmonAggControlEntry associated with each entry in this
+            table."
+    INDEX { dsmonAggControlIndex, dsmonAggProfileDSCP }
+    ::= { dsmonAggProfileTable 1 }
+
+DsmonAggProfileEntry ::= SEQUENCE {
+    dsmonAggProfileDSCP          Dscp,
+    dsmonAggGroupIndex           DsmonCounterAggGroupIndex
+}
+
+dsmonAggProfileDSCP OBJECT-TYPE
+    SYNTAX      Dscp
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The specific DSCP value for the DSCP counter which is
+            configured in a counter aggregation group by this entry."
+    ::= { dsmonAggProfileEntry 1 }
+
+dsmonAggGroupIndex OBJECT-TYPE
+    SYNTAX      DsmonCounterAggGroupIndex
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The counter aggregation group which contains this DSCP
+            value.  Upon creation of a new sub-tree (set of 64 entries
+            with the same dsmonAggControlIndex value) in this table, the
+            agent SHOULD initialize all related instances of this object
+            to the value zero.
+
+            This object MUST NOT be modified if the
+            dsmonAggControlLocked object is equal to 'true'."
+    DEFVAL { 0 }
+    ::= { dsmonAggProfileEntry 2 }
+
+--
+-- Counter Aggregation Group Table
+--
+
+dsmonAggGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonAggGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table provides a description of each counter
+            aggregation group configured on this system.  Note that the
+            semantics of a particular counter aggregation group are only
+            relevant within the scope of a particular counter
+            aggregation profile.
+
+            This table MUST NOT be modified if the dsmonAggControlLocked
+            object is equal to 'true'.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table, and
+            (independently) the number of counter aggregation profiles
+            which may be applied to a particular data source.  In this
+            case, the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905].
+
+            If the agent supports non-volatile configuration of this
+            table, then upon system initialization, this table SHOULD be
+            initialized with the saved values.  Otherwise, each
+            potential counter aggregation group description string
+            SHOULD contain the empty string.
+
+            An agent SHOULD allow entries to be created or modified in
+            this table, even if the specified dsmonAggControlIndex value
+            does not identify a valid dsmonAggControlEntry or a complete
+            set of valid dsmonAggProfileEntries, to reduce row creation
+            order dependencies."
+    ::= { dsmonAggObjects 7 }
+
+dsmonAggGroupEntry OBJECT-TYPE
+    SYNTAX      DsmonAggGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonAggGroupTable.  The
+            dsmonAggGroupIndex value in the INDEX identifies the counter
+            aggregation group associated with each entry.
+
+            The dsmonAggControlIndex in the index identifies the counter
+            aggregation profile associated with each entry, identified
+            by the dsmonAggControlEntry and dsmonAggProfileEntries with
+            the same index value.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            The dsmonAggGroupIndex in the index identifies the counter
+            aggregation group associated with each entry.  This object
+            SHOULD be indexed from zero to 'N', where 'N' is less than
+            the value of the dsmonMaxAggGroups for this agent."
+    INDEX { dsmonAggControlIndex, dsmonAggGroupIndex }
+    ::= { dsmonAggGroupTable 1 }
+DsmonAggGroupEntry ::= SEQUENCE {
+    dsmonAggGroupDescr         SnmpAdminString,
+    dsmonAggGroupStatus        RowStatus
+}
+
+dsmonAggGroupDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..64))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An administratively assigned description of the counter
+            aggregation group identified by this entry.
+
+            Upon first creation of an instance of this object, the agent
+            SHOULD set this object to the empty string.
+
+            This object MUST NOT be modified if the associated
+            dsmonAggGroupStatus object is equal to 'active', or the
+            dsmonAggControlLocked object is equal to 'true'."
+    ::= { dsmonAggGroupEntry 1 }
+
+dsmonAggGroupStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this row.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            This object MUST NOT be modified if the
+            dsmonAggControlLocked object is equal to 'true'."
+    ::= { dsmonAggGroupEntry 2 }
+
+-- *************************************************************
+-- *                                                           *
+-- *     P E R - D A T A S O U R C E   C O L L E C T I O N S   *
+-- *                                                           *
+-- *************************************************************
+
+--
+-- Per-DataSource Statistics Control Table
+--
+
+dsmonStatsControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonStatsControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Controls the setup of per data source per counter
+            aggregation group distribution statistics.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonStatsObjects 1 }
+
+dsmonStatsControlEntry OBJECT-TYPE
+    SYNTAX      DsmonStatsControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonStatsControlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonStatsControlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+            associated dsmonStatsTable to be created and maintained by
+            the agent."
+    INDEX { dsmonStatsControlIndex }
+    ::= { dsmonStatsControlTable 1 }
+
+DsmonStatsControlEntry ::= SEQUENCE {
+    dsmonStatsControlIndex                Integer32,
+    dsmonStatsControlDataSource           DataSource,
+    dsmonStatsControlAggProfile           DsmonCounterAggProfileIndex,
+    dsmonStatsControlDroppedFrames        Counter32,
+    dsmonStatsControlCreateTime           LastCreateTime,
+    dsmonStatsControlOwner                OwnerString,
+    dsmonStatsControlStatus               RowStatus
+}
+
+dsmonStatsControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary and unique index for this
+            dsmonStatsControlEntry."
+    ::= { dsmonStatsControlEntry 1 }
+
+dsmonStatsControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The data source of this per protocol per counter
+            aggregation group distribution.
+
+            Note that only packets that contain a network protocol
+            encapsulation which contains a DS field [RFC2474] will be
+            counted in this table.
+
+            This object MUST NOT be modified if the associated
+            dsmonStatsControlStatus object is equal to active(1)."
+    ::= { dsmonStatsControlEntry 2 }
+
+dsmonStatsControlAggProfile OBJECT-TYPE
+    SYNTAX      DsmonCounterAggProfileIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The dsmonAggControlIndex value identifying the counter
+            aggregation profile which should be used on behalf of this
+            dsmonStatsControlEntry.
+
+            The associated dsmonAggControlEntry and
+            dsmonAggProfileEntries, identified by the same
+            dsmonAggControlIndex index value, MUST be active in order
+            for this entry to remain active.  It is possible for the
+            counter aggregation configuration to change from a valid to
+            invalid state for this dsmonStats collection.  In this case,
+            the associated dsmonStatsControlStatus object will be
+            changed to the 'notReady' state, and data collection will
+            not occur on behalf of this control entry.
+
+            Note that an agent MAY choose to limit the actual number of
+            counter aggregation profiles which may be applied to a
+            particular data source.
+
+            This object MUST NOT be modified if the associated
+            dsmonStatsControlStatus object is equal to active(1)."
+    ::= { dsmonStatsControlEntry 3 }
+
+dsmonStatsControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "frames"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of frames which were received by the probe
+            and therefore not accounted for in the *StatsDropEvents, but
+            for which the probe chose not to count for this entry for
+            whatever reason.  Most often, this event occurs when the
+            probe is out of some resources and decides to shed load from
+            this collection.
+
+            This count does not include packets that were not counted
+            because they had MAC-layer errors.
+
+            Note that, unlike the dropEvents counter, this number is the
+            exact number of frames dropped."
+    ::= { dsmonStatsControlEntry 4 }
+
+dsmonStatsControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this control entry was last
+            activated.  This can be used by the management station to
+            detect if the table has been deleted and recreated between
+            polls."
+    ::= { dsmonStatsControlEntry 5 }
+
+dsmonStatsControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonStatsControlEntry 6 }
+
+dsmonStatsControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this row.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonStatsTable shall be deleted."
+    ::= { dsmonStatsControlEntry 7 }
+
+--
+-- Per-DataSource Statistics Table
+--
+
+dsmonStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of information on counter aggregation group usage
+            for each monitored data source.
+
+            The following table defines per counter aggregation group
+            statistics for full and/or half-duplex links as well as high
+            capacity links.
+
+            For half-duplex links, or full-duplex-capable links
+            operating in half-duplex mode, the dsmonStatsIn* objects
+            shall be used and the dsmonStatsOut* objects will not
+            increment.
+
+            For full-duplex links, the dsmonStatsOut* objects will be
+            present.  Whenever possible, the probe SHOULD count packets
+            moving away from the closest terminating equipment as output
+            packets.  Failing that, the probe SHOULD count packets
+            moving away from the DTE as output packets.
+
+            If the dsmonAggControlLocked object is equal to 'false',
+            then all entries in this table will be deleted and the agent
+            will not process packets on behalf of any
+
+            dsmonStatsControlEntry."
+    ::= { dsmonStatsObjects 2 }
+
+dsmonStatsEntry OBJECT-TYPE
+    SYNTAX      DsmonStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of information on Differentiated Services DSCP
+            usage, containing inbound and outbound packet and octet
+            counters for each counter aggregation group configured for
+            collection.
+
+            The dsmonStatsControlIndex value in the index identifies the
+            dsmonStatsControlEntry on whose behalf this entry was
+            created.
+
+            The dsmonAggGroupIndex value in the index is determined by
+            examining the DSCP value in each monitored packet, and the
+            dsmonAggProfileTable entry for that DSCP value.
+
+            Note that only packets that contain a network protocol
+            encapsulation which contains a DS field [RFC2474] will be
+            counted in this table.
+
+            An example of the indexing of this entry is
+            dsmonStatsOutPkts.1.16"
+     INDEX { dsmonStatsControlIndex, dsmonAggGroupIndex }
+    ::= { dsmonStatsTable 1 }
+
+DsmonStatsEntry ::= SEQUENCE {
+    dsmonStatsInPkts            ZeroBasedCounter32,
+    dsmonStatsInOctets          ZeroBasedCounter32,
+    dsmonStatsInOvflPkts        ZeroBasedCounter32,
+    dsmonStatsInOvflOctets      ZeroBasedCounter32,
+    dsmonStatsInHCPkts          ZeroBasedCounter64,
+    dsmonStatsInHCOctets        ZeroBasedCounter64,
+    dsmonStatsOutPkts           ZeroBasedCounter32,
+    dsmonStatsOutOctets         ZeroBasedCounter32,
+    dsmonStatsOutOvflPkts       ZeroBasedCounter32,
+    dsmonStatsOutOvflOctets     ZeroBasedCounter32,
+    dsmonStatsOutHCPkts         ZeroBasedCounter64,
+    dsmonStatsOutHCOctets       ZeroBasedCounter64
+}
+
+dsmonStatsInPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets using one of the DSCP values in the
+            indicated counter aggregation group, received on a half-
+            duplex link or on the inbound connection of a full-duplex
+            link."
+    ::= { dsmonStatsEntry 1 }
+
+dsmonStatsInOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets in packets, using one of the DSCP
+            values in the indicated counter aggregation group, received
+            on a half-duplex link or on the inbound connection of a
+            full-duplex link."
+    ::= { dsmonStatsEntry 2 }
+
+dsmonStatsInOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonStatsInPkts counter
+            has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonStatsInHCPkts object is
+            also instantiated for a particular dataSource."
+    ::= { dsmonStatsEntry 3 }
+
+dsmonStatsInOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonStatsInOctets
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonStatsInHCOctets object
+            is also instantiated for a particular dataSource."
+    ::= { dsmonStatsEntry 4 }
+
+dsmonStatsInHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonStatsInPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonStatsEntry 5 }
+
+dsmonStatsInHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonStatsInOctets object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonStatsEntry 6 }
+
+dsmonStatsOutPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets using one of the DSCP values in the
+            indicated counter aggregation group, received on a full-
+            duplex link in the direction of the network."
+    ::= { dsmonStatsEntry 7 }
+
+dsmonStatsOutOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets in packets, using one of the DSCP
+            values in the indicated counter aggregation group, received
+            on a full-duplex link in the direction of the network."
+    ::= { dsmonStatsEntry 8 }
+
+dsmonStatsOutOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonStatsOutPkts
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonStatsOutHCPkts object is
+            also instantiated for a particular dataSource."
+    ::= { dsmonStatsEntry 9 }
+
+dsmonStatsOutOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonStatsOutOctets
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonStatsOutHCOctets object
+            is also instantiated for a particular dataSource."
+    ::= { dsmonStatsEntry 10 }
+
+dsmonStatsOutHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonStatsOutPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonStatsEntry 11 }
+
+dsmonStatsOutHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonStatsOutOctets object.
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonStatsEntry 12 }
+
+-- ***********************************************************
+-- *                                                         *
+-- *     P E R - P R O T O C O L    C O L L E C T I O N S    *
+-- *                                                         *
+-- ***********************************************************
+
+--
+-- DSCP Per-Protocol Statistics Control Table
+--
+
+dsmonPdistCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonPdistCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Controls the setup of per application per counter
+            aggregation group distribution statistics.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonPdistObjects 1 }
+
+dsmonPdistCtlEntry OBJECT-TYPE
+    SYNTAX      DsmonPdistCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonPdistCtlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonPdistCtlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+            associated dsmonPdistStatsTable to be created and maintained
+            by the agent."
+    INDEX { dsmonPdistCtlIndex }
+    ::= { dsmonPdistCtlTable 1 }
+
+DsmonPdistCtlEntry ::= SEQUENCE {
+    dsmonPdistCtlIndex                Integer32,
+    dsmonPdistCtlDataSource           DataSource,
+    dsmonPdistCtlAggProfile           DsmonCounterAggProfileIndex,
+    dsmonPdistCtlMaxDesiredEntries    Integer32,
+    dsmonPdistCtlDroppedFrames        Counter32,
+    dsmonPdistCtlInserts              Counter32,
+    dsmonPdistCtlDeletes              Counter32,
+    dsmonPdistCtlCreateTime           LastCreateTime,
+    dsmonPdistCtlOwner                OwnerString,
+    dsmonPdistCtlStatus               RowStatus
+}
+
+dsmonPdistCtlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary and unique index for this dsmonPdistCtlEntry."
+    ::= { dsmonPdistCtlEntry 1 }
+
+dsmonPdistCtlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The source of data for the this per protocol counter
+            aggregation group distribution.
+
+            This object MUST NOT be modified if the associated
+            dsmonPdistCtlStatus object is equal to active(1)."
+    ::= { dsmonPdistCtlEntry 2 }
+
+dsmonPdistCtlAggProfile OBJECT-TYPE
+    SYNTAX      DsmonCounterAggProfileIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The dsmonAggControlIndex value identifying the counter
+            aggregation profile which should be used on behalf of this
+            dsmonPdistCtlEntry.
+
+            The associated dsmonAggControlEntry and
+            dsmonAggProfileEntries, identified by the same
+            dsmonAggControlIndex index value, MUST be active in order
+            for this entry to remain active.  It is possible for the
+            counter aggregation configuration to change from a valid to
+            invalid state for this dsmonPdist collection.  In this case,
+            the associated dsmonPdistCtlStatus object will be changed to
+            the 'notReady' state, and data collection will not occur on
+            behalf of this control entry.
+
+            Note that an agent MAY choose to limit the actual number of
+            counter aggregation profiles which may be applied to a
+            particular data source.
+
+            This object MUST NOT be modified if the associated
+            dsmonPdistCtlStatus object is equal to active(1)."
+    ::= { dsmonPdistCtlEntry 3 }
+
+dsmonPdistCtlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1 | 1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of entries that are desired in the
+            dsmonPdistStatsTable on behalf of this control entry.  The
+            probe will not create more than this number of associated
+            entries in the table, but MAY choose to create fewer entries
+            in this table for any reason including the lack of
+            resources.
+
+            If this value is set to -1, the probe MAY create any number
+            of entries in this table.
+
+            This object MUST NOT be modified if the associated
+            dsmonPdistCtlStatus object is equal to active(1)."
+    ::= { dsmonPdistCtlEntry 4 }
+
+dsmonPdistCtlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "frames"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of frames which were received by the probe
+            and therefore not accounted for in the *StatsDropEvents, but
+            for which the probe chose not to count for this entry for
+            whatever reason.  Most often, this event occurs when the
+            probe is out of some resources and decides to shed load from
+            this collection.
+
+            This count does not include packets that were not counted
+            because they had MAC-layer errors.
+
+            Note that, unlike the dropEvents counter, this number is the
+            exact number of frames dropped."
+    ::= { dsmonPdistCtlEntry 5 }
+
+dsmonPdistCtlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a dsmonPdist entry has been inserted
+            into the dsmonPdistTable.  If an entry is inserted, then
+            deleted, and then inserted, this counter will be incremented
+            by 2.
+
+            To allow for efficient implementation strategies, agents MAY
+            delay updating this object for short periods of time.  For
+            example, an implementation strategy may allow internal data
+            structures to differ from those visible via SNMP for short
+            periods of time.  This counter may reflect the internal data
+            structures for those short periods of time.
+
+            Note that the table size can be determined by subtracting
+            dsmonPdistCtlDeletes from dsmonPdistCtlInserts."
+    ::= { dsmonPdistCtlEntry 6 }
+
+dsmonPdistCtlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a dsmonPdist entry has been deleted
+            from the dsmonPdist table (for any reason).  If an entry is
+            deleted, then inserted, and then deleted, this counter will
+            be incremented by 2.
+
+            To allow for efficient implementation strategies, agents MAY
+            delay updating this object for short periods of time.  For
+            example, an implementation strategy may allow internal data
+            structures to differ from those visible via SNMP for short
+            periods of time.  This counter may reflect the internal data
+            structures for those short periods of time.
+
+            Note that the table size can be determined by subtracting
+            dsmonPdistCtlDeletes from dsmonPdistCtlInserts."
+    ::= { dsmonPdistCtlEntry 7 }
+
+dsmonPdistCtlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this control entry was last
+            activated.  This can be used by the management station to
+            detect if the table has been deleted and recreated between
+            polls."
+    ::= { dsmonPdistCtlEntry 8 }
+
+dsmonPdistCtlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonPdistCtlEntry 9 }
+
+dsmonPdistCtlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this row.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonPdistStatsTable shall be deleted."
+    ::= { dsmonPdistCtlEntry 10 }
+
+--
+-- Per-Protocol Statistics Table
+--
+
+dsmonPdistStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonPdistStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of information on a per protocol per counter
+            aggregation group usage.
+
+            If the dsmonAggControlLocked object is equal to 'false',
+            then all entries in this table will be deleted and the agent
+            will not process packets on behalf of any
+            dsmonPdistCtlEntry."
+    ::= { dsmonPdistObjects 2 }
+
+dsmonPdistStatsEntry OBJECT-TYPE
+    SYNTAX      DsmonPdistStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of information on Differentiated Services DSCP
+            usage, containing packet and octet counters for each counter
+            aggregation group configured for collection, and each
+            protocol (as identified by the protocolDirLocalIndex for the
+            protocol) identified in each monitored packet.
+
+            The dsmonPdistCtlIndex value in the index identifies the
+            dsmonPdistCtlEntry on whose behalf this entry was created.
+
+            Note that only packets that contain a network protocol
+            encapsulation which contains a DS field [RFC2474] will be
+            counted in this table.
+
+            The dsmonAggGroupIndex value in the index is determined by
+            examining the DSCP value in each monitored packet, and the
+            dsmonAggProfileTable entry for that value.
+
+            The protocolDirLocalIndex in the index identifies the
+            protocolDirEntry for the protocol encapsulation of each
+            monitored packet.  The agent will include only application
+            layer protocols in the associated dsmonPdistStatsTable.  Any
+            'terminal' protocol is considered to be an application
+            protocol.
+
+            An example of the indexing of this entry is
+            dsmonPdistStatsPkts.9.29943.0.42."
+     INDEX { dsmonPdistCtlIndex,
+             dsmonPdistTimeMark,
+             dsmonAggGroupIndex,
+             protocolDirLocalIndex }
+    ::= { dsmonPdistStatsTable 1 }
+
+DsmonPdistStatsEntry ::= SEQUENCE {
+    dsmonPdistTimeMark             TimeFilter,
+    dsmonPdistStatsPkts            ZeroBasedCounter32,
+    dsmonPdistStatsOctets          ZeroBasedCounter32,
+    dsmonPdistStatsOvflPkts        ZeroBasedCounter32,
+    dsmonPdistStatsOvflOctets      ZeroBasedCounter32,
+    dsmonPdistStatsHCPkts          ZeroBasedCounter64,
+    dsmonPdistStatsHCOctets        ZeroBasedCounter64,
+    dsmonPdistStatsCreateTime      LastCreateTime
+}
+
+dsmonPdistTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The Time Filter index for this table.  This object may be
+            used by a management station to retrieve only rows which
+            have been created or modified since a particular time.  Note
+            that the current value for a row are always returned and the
+            TimeFilter is not a historical data archiving mechanism.
+            Refer to RFC 2021 [RFC2021] for a detailed description of
+            TimeFilter operation."
+    ::= { dsmonPdistStatsEntry 1 }
+
+dsmonPdistStatsPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, using one of the DSCP values in the
+            indicated counter aggregation group, for the protocol
+            identified by the associated protocolDirLocalIndex value."
+    ::= { dsmonPdistStatsEntry 2 }
+
+dsmonPdistStatsOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets in packets, using one of the DSCP
+            values in the indicated counter aggregation group, for the
+            protocol identified by the associated protocolDirLocalIndex
+            value.
+
+            Note that this object doesn't count just those octets in the
+            particular protocol frames, but includes the entire packet
+            that contained the protocol."
+    ::= { dsmonPdistStatsEntry 3 }
+
+dsmonPdistStatsOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonPdistStatsPkts
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonPdistStatsHCPkts object
+            is also instantiated for a particular dataSource."
+    ::= { dsmonPdistStatsEntry 4 }
+
+dsmonPdistStatsOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonPdistStatsOctets
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonPdistStatsHCOctets
+            object is also instantiated for a particular dataSource."
+    ::= { dsmonPdistStatsEntry 5 }
+
+dsmonPdistStatsHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonPdistStatsPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonPdistStatsEntry 6 }
+
+dsmonPdistStatsHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonPdistStatsOctets object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonPdistStatsEntry 7 }
+
+dsmonPdistStatsCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this dsmonPdistStats entry was
+            last instantiated by the agent.  This can be used by the
+            management station to detect if the entry has been deleted
+            and recreated between polls."
+    ::= { dsmonPdistStatsEntry 8 }
+
+--
+-- Per-Protocol Statistics TopN Control Table
+--
+
+dsmonPdistTopNCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonPdistTopNCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A set of parameters that control the creation of a report
+            of the top N dsmonPdist entries according to a particular
+            metric.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonPdistObjects 3 }
+
+dsmonPdistTopNCtlEntry OBJECT-TYPE
+    SYNTAX      DsmonPdistTopNCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonPdistTopNCtlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonPdistTopNCtlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+            associated dsmonPdistTopNTable to be created and maintained
+            by the agent."
+    INDEX { dsmonPdistTopNCtlIndex }
+    ::= { dsmonPdistTopNCtlTable 1 }
+
+DsmonPdistTopNCtlEntry ::= SEQUENCE {
+    dsmonPdistTopNCtlIndex            Integer32,
+    dsmonPdistTopNCtlPdistIndex       Integer32,
+    dsmonPdistTopNCtlRateBase         INTEGER,
+    dsmonPdistTopNCtlTimeRemaining    Integer32,
+    dsmonPdistTopNCtlGeneratedReprts  Counter32,
+    dsmonPdistTopNCtlDuration         Integer32,
+    dsmonPdistTopNCtlRequestedSize    Integer32,
+    dsmonPdistTopNCtlGrantedSize      Integer32,
+    dsmonPdistTopNCtlStartTime        TimeStamp,
+    dsmonPdistTopNCtlOwner            OwnerString,
+    dsmonPdistTopNCtlStatus           RowStatus
+}
+
+dsmonPdistTopNCtlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            dsmonPdistTopNCtlTable, with the same dsmonPdistTopNCtlIndex
+            value as this object.  Each entry in this table defines one
+            Top N report prepared on behalf of the dsmonPdistStatsEntry
+            collection with the same dsmonPdistCtlIndex as this object."
+    ::= { dsmonPdistTopNCtlEntry 1 }
+
+dsmonPdistTopNCtlPdistIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The dsmonPdistTable for which a top N report will be
+            prepared on behalf of this entry.  The dsmonPdistTable is
+            identified by the value of the dsmonPdistCtlIndex for that
+            table - that value is used here to identify the particular
+            table.
+
+            This object MUST NOT be modified if the associated
+            dsmonPdistTopNCtlStatus object is equal to active(1)."
+    ::= { dsmonPdistTopNCtlEntry 2 }
+
+dsmonPdistTopNCtlRateBase OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  dsmonPdistTopNPkts(1),
+                  dsmonPdistTopNOctets(2),
+                  dsmonPdistTopNHCPkts(3),
+                  dsmonPdistTopNHCOctets(4)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The variable for each dsmonPdist that the
+            dsmonPdistTopNRate and dsmonPdistTopNHCRate variables are
+            based upon.  Each dsmonPdistTopN report generated on behalf
+            of this control entry will be ranked in descending order,
+            based on the associated dsmonPdistStatsTable counter,
+            identified by this object.
+
+            The following table identifies the dsmonPdistTable counter
+            associated with each enumeration:
+
+            Enumeration              RateBase MIB Object
+            -----------              -------------------
+            dsmonPdistTopNPkts          dsmonPdistStatsPkts
+            dsmonPdistTopNOctets        dsmonPdistStatsOctets
+            dsmonPdistTopNHCPkts        dsmonPdistStatsHCPkts
+            dsmonPdistTopNHCOctets      dsmonPdistStatsHCOctets
+
+            Note that the dsmonPdistTopNHCPkts and
+            dsmonPdistTopNHCOctets enumerations are only available if
+            the agent supports High Capacity monitoring.
+
+            This object MUST NOT be modified if the associated
+            dsmonPdistTopNCtlStatus object is equal to active(1)."
+    ::= { dsmonPdistTopNCtlEntry 3 }
+
+dsmonPdistTopNCtlTimeRemaining OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds left in the report currently being
+            collected.  When this object is modified by the management
+            station, a new collection is started, possibly aborting a
+            currently running report.  The new value is used as the
+            requested duration of this report, and is immediately loaded
+            into the associated dsmonPdistTopNCtlDuration object.
+
+            When the report finishes, the probe will automatically start
+            another collection with the same initial value of
+            dsmonPdistTopNCtlTimeRemaining.  Thus the management station
+            may simply read the resulting reports repeatedly, checking
+            the startTime and duration each time to ensure that a report
+            was not missed or that the report parameters were not
+            changed.
+
+            While the value of this object is non-zero, it decrements by
+            one per second until it reaches zero.  At the time that this
+            object decrements to zero, the report is made accessible in
+            the dsmonPdistTopNTable, overwriting any report that may be
+            there.
+
+            When this object is modified by the management station, any
+            associated entries in the dsmonPdistTopNTable shall be
+            deleted."
+    DEFVAL { 1800 }
+    ::= { dsmonPdistTopNCtlEntry 4 }
+
+dsmonPdistTopNCtlGeneratedReprts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "reports"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of reports that have been generated by this
+            entry."
+    ::= { dsmonPdistTopNCtlEntry 5 }
+
+dsmonPdistTopNCtlDuration OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds that this report has collected during
+            the last sampling interval.
+
+            When the associated dsmonPdistTopNCtlTimeRemaining object is
+            set, this object shall be set by the probe to the same value
+            and shall not be modified until the next time the
+            dsmonPdistTopNCtlTimeRemaining is set.
+
+            This value shall be zero if no reports have been requested
+            for this dsmonPdistTopNCtlEntry."
+    ::= { dsmonPdistTopNCtlEntry 6 }
+
+dsmonPdistTopNCtlRequestedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "table entries"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of dsmonPdist entries requested for this
+            report.
+
+            When this object is created or modified, the probe SHOULD
+            set dsmonPdistTopNCtlGrantedSize as closely to this object
+            as is possible for the particular probe implementation and
+            available resources."
+    DEFVAL { 150 }
+    ::= { dsmonPdistTopNCtlEntry 7 }
+
+dsmonPdistTopNCtlGrantedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of dsmonPdist entries in this report.
+
+            When the associated dsmonPdistTopNCtlRequestedSize object is
+            created or modified, the probe SHOULD set this object as
+            closely to the requested value as is possible for the
+            particular implementation and available resources.  The
+            probe MUST NOT lower this value except as a result of a
+            set to the associated dsmonPdistTopNCtlRequestedSize
+            object.
+
+            Protocol entries with the highest value of
+            dsmonPdistTopNRate or dsmonPdistTopNHCRate (depending on the
+            value of the associated dsmonPdistTopNCtlRateBase object)
+            shall be placed in this table in decreasing order of this
+            rate until there is no more room or until there are no more
+            dsmonPdist entries."
+    ::= { dsmonPdistTopNCtlEntry 8 }
+
+dsmonPdistTopNCtlStartTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this top N report was last
+            started.  In other words, this is the time that the
+            associated dsmonPdistTopNCtlTimeRemaining object was
+            modified to start the requested report or the time the
+            report was last automatically (re)started.
+
+            This object may be used by the management station to
+            determine if a report was missed or not."
+    ::= { dsmonPdistTopNCtlEntry 9 }
+
+dsmonPdistTopNCtlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonPdistTopNCtlEntry 10 }
+
+dsmonPdistTopNCtlStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this dsmonPdistTopNCtlEntry.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonPdistTopNTable shall be deleted by the
+            agent."
+    ::= { dsmonPdistTopNCtlEntry 11 }
+
+--
+-- dsmonPdist TopN Table
+--
+
+dsmonPdistTopNTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DsmonPdistTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A set of statistics for those protocol distribution entries
+            that have counted the highest number of octets or packets.
+
+            If the dsmonAggControlLocked object is equal to 'false',
+            then all entries in this table SHALL be deleted, and the
+            agent will not process TopN reports on behalf of any
+            dsmonPdistTopNCtlEntry.
+
+            When the dsmonAggControlLocked object is set to 'true', then
+            particular reports SHOULD be restarted from the beginning,
+            on behalf of all active rows in the dsmonPdistTopNCtlTable.
+
+            Note that dsmonPdist entries which did not increment at all
+            during the report interval SHOULD NOT be included in
+            dsmonPdistTopN reports."
+    ::= { dsmonPdistObjects 4 }
+
+dsmonPdistTopNEntry OBJECT-TYPE
+    SYNTAX     DsmonPdistTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A conceptual row in the dsmonPdistTopNTable.
+
+            The dsmonPdistTopNCtlIndex value in the index identifies the
+            dsmonPdistTopNCtlEntry on whose behalf this entry was
+            created.  Entries in this table are ordered from 1 to 'N',
+            where lower numbers represent higher values of the rate base
+            object, over the report interval."
+    INDEX { dsmonPdistTopNCtlIndex, dsmonPdistTopNIndex }
+    ::= { dsmonPdistTopNTable 1 }
+
+DsmonPdistTopNEntry ::= SEQUENCE {
+    dsmonPdistTopNIndex                      Integer32,
+    dsmonPdistTopNPDLocalIndex               Integer32,
+    dsmonPdistTopNAggGroup                   DsmonCounterAggGroupIndex,
+    dsmonPdistTopNRate                       Gauge32,
+    dsmonPdistTopNRateOvfl                   Gauge32,
+    dsmonPdistTopNHCRate                     CounterBasedGauge64
+}
+
+dsmonPdistTopNIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            dsmonPdistTopNTable among those in the same report.  This
+            index is between 1 and N, where N is the number of entries
+            in this report.  Note that 'N' may change over time, and may
+            also be less than the dsmonPdistTopNCtlGrantedSize value
+            associated with this entry."
+    ::= { dsmonPdistTopNEntry 1 }
+
+dsmonPdistTopNPDLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The protocolDirLocalIndex value which identifies the
+            protocol associated with this entry.
+
+            If the protocolDirEntry associated with the
+            protocolDirLocalIndex with the same value as this object is
+            de-activated or deleted, then the agent MUST delete this
+            dsmonPdistTopN entry."
+    ::= { dsmonPdistTopNEntry 2 }
+
+dsmonPdistTopNAggGroup OBJECT-TYPE
+    SYNTAX      DsmonCounterAggGroupIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The DSCP counter aggregation group index value associated
+            with protocol identified in this entry.  This object
+            identifies the dsmonAggGroupEntry with the same
+            dsmonAggControlIndex value as the associated
+            dsmonPdistCtlAggProfile object and the same
+            dsmonAggGroupIndex value as this object."
+    ::= { dsmonPdistTopNEntry 3 }
+
+dsmonPdistTopNRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of change in the selected variable during this
+            sampling interval.  The selected variable is this protocol's
+            instance of the object selected by
+            dsmonPdistTopNCtlRateBase.
+
+            If the associated dsmonPdistTopNCtlRateBase is equal to
+            'dsmonPdistTopNHCPkts' or 'dsmonPdistTopNHCOctets', then
+            this object will contain the the least significant 32 bits
+            of the associated dsmonPdistTopNHCRate object."
+    ::= { dsmonPdistTopNEntry 4 }
+
+dsmonPdistTopNRateOvfl OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The most significant 32 bits of the associated
+            dsmonPdistTopNHCRate object.
+
+            If the associated dsmonPdistTopNCtlRateBase is equal to
+            'dsmonPdistTopNHCPkts' or 'dsmonPdistTopNHCOctets', then
+            this object will contain the upper 32 bits of the associated
+            dsmonPdistTopNHCRate object.
+
+            If the associated dsmonPdistTopNCtlRateBase is equal to
+            'dsmonPdistTopNPkts' or 'dsmonPdistTopNOctets', then this
+            object will contain the value zero.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonPdistTopNEntry 5 }
+
+dsmonPdistTopNHCRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of change in the selected variable during this
+            sampling interval.  The selected variable is this protocol's
+            instance of the object selected by
+            dsmonPdistTopNCtlRateBase.
+
+            If the associated dsmonPdistTopNCtlRateBase is equal to
+            'dsmonPdistTopNPkts' or 'dsmonPdistTopNOctets', then this
+            object will contain the value zero, and the associated
+            dsmonPdistTopNRate object will contain the change in the
+            selected variable during the sampling interval.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonPdistTopNEntry 6 }
+
+-- ***********************************************************
+-- *                                                         *
+-- *      P E R  -  H O S T       C O L L E C T I O N S      *
+-- *                                                         *
+-- ***********************************************************
+
+--
+-- NL Host Statistics Control Table
+--
+
+dsmonHostCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonHostCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Controls setup of per counter aggregation group, per
+            network layer host distribution statistics.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonHostObjects 1 }
+
+dsmonHostCtlEntry OBJECT-TYPE
+    SYNTAX      DsmonHostCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonHostCtlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonHostCtlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+            associated dsmonHostTable to be created and maintained by
+            the agent."
+    INDEX { dsmonHostCtlIndex }
+    ::= { dsmonHostCtlTable 1 }
+
+DsmonHostCtlEntry ::= SEQUENCE {
+    dsmonHostCtlIndex                Integer32,
+    dsmonHostCtlDataSource           DataSource,
+    dsmonHostCtlAggProfile           DsmonCounterAggProfileIndex,
+    dsmonHostCtlMaxDesiredEntries    Integer32,
+    dsmonHostCtlIPv4PrefixLen        Integer32,
+    dsmonHostCtlIPv6PrefixLen        Integer32,
+    dsmonHostCtlDroppedFrames        Counter32,
+    dsmonHostCtlInserts              Counter32,
+    dsmonHostCtlDeletes              Counter32,
+    dsmonHostCtlCreateTime           LastCreateTime,
+    dsmonHostCtlOwner                OwnerString,
+    dsmonHostCtlStatus               RowStatus
+}
+
+dsmonHostCtlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary and unique index for this dsmonHostCtlEntry."
+    ::= { dsmonHostCtlEntry 1 }
+
+dsmonHostCtlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The source of data for the associated dsmonHostTable.
+
+            Note that only packets that contain a network protocol
+            encapsulation which contains a DS field [RFC2474] will be
+            counted in this table.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostCtlStatus object is equal to active(1)."
+    ::= { dsmonHostCtlEntry 2 }
+
+dsmonHostCtlAggProfile OBJECT-TYPE
+    SYNTAX      DsmonCounterAggProfileIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The dsmonAggControlIndex value identifying the counter
+            aggregation profile which should be used on behalf of this
+            dsmonHostCtlEntry.
+
+            The associated dsmonAggControlEntry and
+            dsmonAggProfileEntries, identified by the same
+            dsmonAggControlIndex index value, MUST be active in order
+            for this entry to remain active.  It is possible for the
+            counter aggregation configuration to change from a valid to
+            invalid state for this dsmonHost collection.  In this case,
+            the associated dsmonHostCtlStatus object will be changed to
+            the 'notReady' state, and data collection will not occur on
+            behalf of this control entry.
+
+            Note that an agent MAY choose to limit the actual number of
+            counter aggregation profiles which may be applied to a
+            particular data source.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostCtlStatus object is equal to active(1)."
+    ::= { dsmonHostCtlEntry 3 }
+
+dsmonHostCtlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1 | 1..2147483647)
+    UNITS       "table entries"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of entries that are desired in the
+            dsmonHostTable on behalf of this control entry.  The probe
+            will not create more than this number of associated entries
+            in the table, but MAY choose to create fewer entries in this
+            table for any reason including the lack of resources.
+
+            If this value is set to -1, the probe MAY create any number
+            of entries in this table.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostCtlStatus object is equal to active(1)."
+    ::= { dsmonHostCtlEntry 4 }
+
+dsmonHostCtlIPv4PrefixLen OBJECT-TYPE
+    SYNTAX      Integer32 (8..32)
+    UNITS       "bits"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The number of 'leftmost' contiguous bits in the host
+            address field for encapsulations of IPv4, that should be
+            maintained in this collection.  This object controls how the
+            dsmonHostAddress object is derived for packets which contain
+            an encapsulation of IPv4.
+
+            If this object has a value less than 32, then 'm' rightmost
+            bits, where 'm' is equal to '32 -
+            dsmonHostCtlIPv4PrefixLen', will be cleared to zero for
+            counting purposes only.  The 'leftmost' bit is the most
+            significant bit of the first network-byte-order octet of the
+            address.
+
+            If this object is equal to 32, then no bits are cleared in
+            each dsmonHostAddress field.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostCtlStatus object is equal to active(1)."
+    DEFVAL { 32 }
+    ::= { dsmonHostCtlEntry 5 }
+
+dsmonHostCtlIPv6PrefixLen OBJECT-TYPE
+    SYNTAX      Integer32 (8..128)
+    UNITS       "bits"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The number of 'leftmost' contiguous bits in the host
+            address field for encapsulations of IPv6, that should be
+            maintained in this collection.  This object controls how the
+            dsmonHostAddress object is derived for packets which contain
+            an encapsulation of IPv6.
+
+            If this object has a value less than 128, then 'm' rightmost
+            bits, where 'm' is equal to '128 -
+
+            dsmonHostCtlIPv6PrefixLen', will be cleared to zero for
+            counting purposes only.  The 'leftmost' bit is the most
+            significant bit of the first network-byte-order octet of the
+            address.
+
+            If this object is equal to 128, then no bits are cleared in
+            each dsmonHostAddress field.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostCtlStatus object is equal to active(1)."
+    DEFVAL { 128 }
+    ::= { dsmonHostCtlEntry 6 }
+
+dsmonHostCtlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "frames"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of frames which were received by the probe
+            and therefore not accounted for in the *StatsDropEvents, but
+            for which the probe chose not to count for the associated
+            dsmonHost entries for whatever reason.  Most often, this
+            event occurs when the probe is out of some resources and
+            decides to shed load from this collection.
+
+            This count does not include packets that were not counted
+            because they had MAC-layer errors.
+
+            Note that if the dsmonHostTable is inactive because no
+            appropriate protocols are enabled in the protocol directory,
+            this value SHOULD be 0.
+
+            Note that, unlike the dropEvents counter, this number is the
+            exact number of frames dropped."
+    ::= { dsmonHostCtlEntry 7 }
+
+dsmonHostCtlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a dsmonHost entry has been inserted
+            into the dsmonHost table.  If an entry is inserted, then
+            deleted, and then inserted, this counter will be incremented
+            by 2.
+
+            To allow for efficient implementation strategies, agents MAY
+            delay updating this object for short periods of time.  For
+            example, an implementation strategy may allow internal data
+            structures to differ from those visible via SNMP for short
+            periods of time.  This counter may reflect the internal data
+            structures for those short periods of time.
+
+            Note that the table size can be determined by subtracting
+            dsmonHostCtlDeletes from dsmonHostCtlInserts."
+    ::= { dsmonHostCtlEntry 8 }
+
+dsmonHostCtlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a dsmonHost entry has been deleted from
+            the dsmonHost table (for any reason).  If an entry is
+            deleted, then inserted, and then deleted, this counter will
+            be incremented by 2.
+
+            To allow for efficient implementation strategies, agents MAY
+            delay updating this object for short periods of time.  For
+            example, an implementation strategy may allow internal data
+            structures to differ from those visible via SNMP for short
+            periods of time.  This counter may reflect the internal data
+            structures for those short periods of time.
+
+            Note that the table size can be determined by subtracting
+            dsmonHostCtlDeletes from dsmonHostCtlInserts."
+    ::= { dsmonHostCtlEntry 9 }
+
+dsmonHostCtlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this control entry was last
+            activated.  This can be used by the management station to
+            detect if the table has been deleted and recreated between
+            polls."
+    ::= { dsmonHostCtlEntry 10 }
+
+dsmonHostCtlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonHostCtlEntry 11 }
+
+dsmonHostCtlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this dsmonHostCtlEntry.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonHostTable shall be deleted."
+    ::= { dsmonHostCtlEntry 12 }
+
+--
+-- NL Host Statistics Table
+--
+
+dsmonHostTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A collection of statistics for particular network protocols
+            which contain a DS field, and that has been discovered on a
+            particular dataSource.
+
+            The probe will add to this table all appropriate network
+            protocols, for each network address seen as the source or
+            destination address in all packets with no MAC errors, and
+            will increment octet and packet counts in the table for all
+            packets with no MAC errors.
+
+            If the dsmonAggControlLocked object is equal to 'false',
+            then all entries in this table will be deleted, and the
+            agent will not process packets on behalf of any
+            dsmonHostCtlEntry."
+    ::= { dsmonHostObjects 2 }
+
+dsmonHostEntry OBJECT-TYPE
+    SYNTAX      DsmonHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of information on Differentiated Services DSCP
+            usage, containing packet and octet counters for each counter
+            aggregation group index configured for collection per host
+            address, as identified in the dsmonAggProfileTable.
+
+            The dsmonHostCtlIndex value in the index identifies the
+            dsmonHostCtlEntry on whose behalf this entry was created.
+
+            The protocolDirLocalIndex value in the index identifies the
+            specific network layer protocol encapsulation associated
+            with each entry, and the network protocol type of the
+            dsmonHostAddress object.  It MUST identify a
+            protocolDirEntry which contains a DS field (e.g., IPv4 or
+            IPv6).  Note that if a protocol encapsulation with multiple
+            network layers is specified, then associated entries in this
+            table refer to the innermost network protocol layer host
+            address.
+
+            The dsmonAggGroupIndex value in the index is determined by
+            examining the DSCP value in each monitored packet, and the
+            dsmonAggProfileTable entry configured for that value.
+
+            An example of the indexing of this entry is
+            dsmonHostOutPkts.1.27273.3.200.4.171.69.120.0"
+    INDEX { dsmonHostCtlIndex,
+            dsmonHostTimeMark,
+            dsmonAggGroupIndex,
+            protocolDirLocalIndex,
+            dsmonHostAddress }
+    ::= { dsmonHostTable 1 }
+
+DsmonHostEntry ::= SEQUENCE {
+    dsmonHostTimeMark              TimeFilter,
+    dsmonHostAddress               OCTET STRING,
+    dsmonHostInPkts                ZeroBasedCounter32,
+    dsmonHostInOctets              ZeroBasedCounter32,
+    dsmonHostInOvflPkts            ZeroBasedCounter32,
+    dsmonHostInOvflOctets          ZeroBasedCounter32,
+    dsmonHostInHCPkts              ZeroBasedCounter64,
+    dsmonHostInHCOctets            ZeroBasedCounter64,
+    dsmonHostOutPkts               ZeroBasedCounter32,
+    dsmonHostOutOctets             ZeroBasedCounter32,
+    dsmonHostOutOvflPkts           ZeroBasedCounter32,
+    dsmonHostOutOvflOctets         ZeroBasedCounter32,
+    dsmonHostOutHCPkts             ZeroBasedCounter64,
+    dsmonHostOutHCOctets           ZeroBasedCounter64,
+    dsmonHostCreateTime            LastCreateTime
+
+}
+
+dsmonHostTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The Time Filter index for this table.  This object may be
+            used by a management station to retrieve only rows which
+            have been created or modified since a particular time.  Note
+            that the current value for a row are always returned and the
+            TimeFilter is not a historical data archiving mechanism.
+            Refer to RFC 2021 [RFC2021] for a detailed description of
+            TimeFilter operation."
+    ::= { dsmonHostEntry 1 }
+
+dsmonHostAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..110))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The network address for this dsmonHostEntry.
+
+            This object is encoded according to the protocol type
+            indicated by the protocolDirLocalIndex value in the index.
+
+            In addition, this object may have some 'rightmost' bits
+            cleared to zero for counting purposes, as indicated by the
+            associated dsmonHostCtlIPv4PrefixLen or
+            dsmonHostCtlIPv6PrefixLen objects."
+    ::= { dsmonHostEntry 2 }
+
+dsmonHostInPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets without errors, using one of the DSCP
+            values in the indicated counter aggregation group, and
+            transmitted to this address, since this entry was added to
+            the dsmonHostTable.  Note that this is the number of link-
+            layer packets, so if a single network-layer packet is
+            fragmented into several link-layer frames, this counter is
+            incremented several times."
+    ::= { dsmonHostEntry 3 }
+
+dsmonHostInOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets in all packets, transmitted to this
+            address and using one of the DSCP values in the indicated
+            counter aggregation group, since this entry was added to the
+            dsmonHostTable (excluding framing bits but including FCS
+            octets), excluding those octets in packets that contained
+            errors.
+
+            Note this doesn't count just those octets in the particular
+            protocol frames, but includes the entire packet that
+            contained the protocol."
+    ::= { dsmonHostEntry 4 }
+
+dsmonHostInOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonHostInPkts counter
+            has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonHostInHCPkts object is
+            also instantiated for a particular dataSource."
+    ::= { dsmonHostEntry 5 }
+
+dsmonHostInOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonHostInOctets
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonHostInHCOctets object is
+            also instantiated for a particular dataSource."
+    ::= { dsmonHostEntry 6 }
+
+dsmonHostInHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonHostInPkts object.
+
+            Note that this object will only be instantiated if the RMON
+
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonHostEntry 7 }
+
+dsmonHostInHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonHostInOctets object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonHostEntry 8 }
+
+dsmonHostOutPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets without errors, using one of the DSCP
+            values in the indicated counter aggregation group, and
+            transmitted by this address, since this entry was added to
+            the dsmonHostTable.  Note that this is the number of link-
+            layer packets, so if a single network-layer packet is
+            fragmented into several link-layer frames, this counter is
+            incremented several times."
+    ::= { dsmonHostEntry 9 }
+
+dsmonHostOutOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets, transmitted by this address and using
+            one of the DSCP values in the identified counter aggregation
+            group, since this entry was added to the dsmonHostTable
+            (excluding framing bits but including FCS octets), excluding
+            those octets in packets that contained errors.
+
+            Note this doesn't count just those octets in the particular
+            protocol frames, but includes the entire packet that
+            contained the protocol."
+    ::= { dsmonHostEntry 10 }
+
+dsmonHostOutOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonHostOutPkts counter
+            has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonHostOutHCPkts object is
+            also instantiated for a particular dataSource."
+    ::= { dsmonHostEntry 11 }
+
+dsmonHostOutOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonHostOutOctets
+            counter has overflowed.  Note that this object will only be
+            instantiated if the associated dsmonHostOutHCOctets object
+            is also instantiated for a particular dataSource."
+    ::= { dsmonHostEntry 12 }
+
+dsmonHostOutHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonHostOutPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonHostEntry 13 }
+
+dsmonHostOutHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonHostOutOctets object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonHostEntry 14 }
+
+dsmonHostCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this dsmonHost entry was last
+            instantiated by the agent.  This can be used by the
+            management station to ensure that the entry has not been
+            deleted and recreated between polls."
+    ::= { dsmonHostEntry 15 }
+
+--
+-- Per-Protocol Per-Host NL Statistics TopN Control Table
+--
+
+dsmonHostTopNCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonHostTopNCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A set of parameters that control the creation of a report
+            of the top N dsmonHost entries according to a selected
+            metric.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonHostObjects 3 }
+
+dsmonHostTopNCtlEntry OBJECT-TYPE
+    SYNTAX      DsmonHostTopNCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonHostTopNCtlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonHostTopNCtlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+
+            associated dsmonHostTopNTable to be created and maintained
+            by the agent."
+    INDEX { dsmonHostTopNCtlIndex }
+    ::= { dsmonHostTopNCtlTable 1 }
+
+DsmonHostTopNCtlEntry ::= SEQUENCE {
+    dsmonHostTopNCtlIndex            Integer32,
+    dsmonHostTopNCtlHostIndex        Integer32,
+    dsmonHostTopNCtlRateBase         INTEGER,
+    dsmonHostTopNCtlTimeRemaining    Integer32,
+    dsmonHostTopNCtlGeneratedReports Counter32,
+    dsmonHostTopNCtlDuration         Integer32,
+    dsmonHostTopNCtlRequestedSize    Integer32,
+    dsmonHostTopNCtlGrantedSize      Integer32,
+    dsmonHostTopNCtlStartTime        TimeStamp,
+    dsmonHostTopNCtlOwner            OwnerString,
+    dsmonHostTopNCtlStatus           RowStatus
+}
+
+dsmonHostTopNCtlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            dsmonHostTopNCtlTable.  Each such entry defines one Top N
+            report prepared for one RMON dataSource."
+    ::= { dsmonHostTopNCtlEntry 1 }
+
+dsmonHostTopNCtlHostIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The dsmonHostTable for which a top N report will be
+            prepared on behalf of this entry.  The dsmonHostTable is
+            identified by the value of the dsmonHostCtlIndex for that
+            table - that value is used here to identify the particular
+            table.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostTopNCtlStatus object is equal to active(1)."
+    ::= { dsmonHostTopNCtlEntry 2 }
+
+dsmonHostTopNCtlRateBase OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  dsmonHostTopNInPkts(1),
+                  dsmonHostTopNInOctets(2),
+                  dsmonHostTopNOutPkts(3),
+                  dsmonHostTopNOutOctets(4),
+                  dsmonHostTopNTotalPkts(5),
+                  dsmonHostTopNTotalOctets(6),
+                  dsmonHostTopNInHCPkts(7),
+                  dsmonHostTopNInHCOctets(8),
+                  dsmonHostTopNOutHCPkts(9),
+                  dsmonHostTopNOutHCOctets(10),
+                  dsmonHostTopNTotalHCPkts(11),
+                  dsmonHostTopNTotalHCOctets(12)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The variable(s) for each dsmonHost that the
+            dsmonHostTopNRate and dsmonHostTopNHCRate variables are
+            based upon.  Each dsmonHostTopN report generated on behalf
+            of this control entry will be ranked in descending order,
+            based on the associated dsmonHostTable counter(s),
+            identified by this object.
+
+            The following table identifies the dsmonHostTable counters
+            associated with each enumeration:
+
+            Enumeration              RateBase MIB Objects
+            -----------              --------------------
+            dsmonHostTopNInPkts         dsmonHostInPkts
+            dsmonHostTopNInOctets       dsmonHostInOctets
+            dsmonHostTopNOutPkts        dsmonHostOutPkts
+            dsmonHostTopNOutOctets      dsmonHostOutOctets
+            dsmonHostTopNTotalPkts      dsmonHostInPkts +
+                                          dsmonHostOutPkts
+            dsmonHostTopNTotalOctets    dsmonHostInOctets +
+                                          dsmonHostOutOctets
+            dsmonHostTopNInHCPkts       dsmonHostInHCPkts
+            dsmonHostTopNInHCOctets     dsmonHostInHCOctets
+            dsmonHostTopNOutHCPkts      dsmonHostOutHCPkts
+            dsmonHostTopNOutHCOctets    dsmonHostOutHCPkts
+            dsmonHostTopNTotalHCPkts    dsmonHostInHCPkts +
+                                          dsmonHostOutHCPkts
+            dsmonHostTopNTotalHCOctets  dsmonHostInHCOctets +
+                                          dsmonHostOutHCOctets
+
+            The following enumerations are only available if the agent
+            supports High Capacity monitoring:
+
+            dsmonHostTopNInHCPkts
+            dsmonHostTopNInHCOctets
+
+            dsmonHostTopNOutHCPkts
+            dsmonHostTopNOutHCOctets
+            dsmonHostTopNTotalHCPkts
+            dsmonHostTopNTotalHCOctets
+
+            It is an implementation-specific matter whether an agent can
+            detect an overflow condition resulting from the addition of
+            two counter delta values for the following enumerations:
+
+            dsmonHostTopNTotalPkts
+            dsmonHostTopNTotalOctets
+            dsmonHostTopNTotalHCPkts
+            dsmonHostTopNTotalHCOctets
+
+            In the event such an overflow condition can be detected by
+            the agent, the associated dsmonHostTopNRate,
+            dsmonHostTopNRateOvfl, and/or dsmonHostTopNHCRate objects
+            should be set to their maximum value.
+
+            This object MUST NOT be modified if the associated
+            dsmonHostTopNCtlStatus object is equal to active(1)."
+    ::= { dsmonHostTopNCtlEntry 3 }
+
+dsmonHostTopNCtlTimeRemaining OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds left in the report currently being
+            collected.  When this object is modified by the management
+            station, a new collection is started, possibly aborting a
+            currently running report.  The new value is used as the
+            requested duration of this report, and is immediately loaded
+            into the associated dsmonHostTopNCtlDuration object.
+
+            When the report finishes, the probe will automatically start
+            another collection with the same initial value of
+            dsmonHostTopNCtlTimeRemaining.  Thus the management station
+            may simply read the resulting reports repeatedly, checking
+            the startTime and duration each time to ensure that a report
+            was not missed or that the report parameters were not
+            changed.
+
+            While the value of this object is non-zero, it decrements by
+            one per second until it reaches zero.  At the time that this
+            object decrements to zero, the report is made accessible in
+            the dsmonHostTopNTable, overwriting any report that may be
+
+            there.
+
+            When this object is modified by the management station, any
+            associated entries in the dsmonHostTopNTable shall be
+            deleted."
+    DEFVAL { 1800 }
+    ::= { dsmonHostTopNCtlEntry 4 }
+
+dsmonHostTopNCtlGeneratedReports OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "reports"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of reports that have been generated by this
+            entry."
+    ::= { dsmonHostTopNCtlEntry 5 }
+
+dsmonHostTopNCtlDuration OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds that this report has collected during
+            the last sampling interval.
+
+            When the associated dsmonHostTopNCtlTimeRemaining object is
+            set, this object shall be set by the probe to the same value
+            and shall not be modified until the next time the
+            dsmonHostTopNCtlTimeRemaining is set.
+
+            This value shall be zero if no reports have been requested
+            for this dsmonHostTopNCtlEntry."
+    ::= { dsmonHostTopNCtlEntry 6 }
+
+dsmonHostTopNCtlRequestedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "table entries"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of dsmonHost entries requested for this
+            report.
+
+            When this object is created or modified, the probe SHOULD
+            set dsmonHostTopNCtlGrantedSize as closely to this object as
+            is possible for the particular probe implementation and
+
+            available resources."
+    DEFVAL { 150 }
+    ::= { dsmonHostTopNCtlEntry 7 }
+
+dsmonHostTopNCtlGrantedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of dsmonHost entries in this report.
+
+            When the associated dsmonHostTopNCtlRequestedSize object is
+            created or modified, the probe SHOULD set this object as
+            closely to the requested value as is possible for the
+            particular implementation and available resources.  The
+            probe MUST NOT lower this value except as a result of a
+            set to the associated dsmonHostTopNCtlRequestedSize
+            object.
+
+            Protocol entries with the highest value of dsmonHostTopNRate
+            or dsmonHostTopNHCRate (depending on the value of the
+            associated dsmonHostTopNCtlRateBase object) shall be placed
+            in this table in decreasing order of this rate until there
+            is no more room or until there are no more dsmonHost
+            entries."
+    ::= { dsmonHostTopNCtlEntry 8 }
+
+dsmonHostTopNCtlStartTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this top N report was last
+            started.  In other words, this is the time that the
+            associated dsmonHostTopNCtlTimeRemaining object was modified
+            to start the requested report or the time the report was
+            last automatically (re)started.
+
+            This object may be used by the management station to
+            determine if a report was missed or not."
+    ::= { dsmonHostTopNCtlEntry 9 }
+
+dsmonHostTopNCtlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonHostTopNCtlEntry 10 }
+
+dsmonHostTopNCtlStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this dsmonHostTopNCtlEntry.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonHostTopNTable shall be deleted by the
+            agent."
+    ::= { dsmonHostTopNCtlEntry 11 }
+
+--
+-- dsmonHost TopN Table
+--
+
+dsmonHostTopNTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DsmonHostTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A set of statistics for those dsmonHost entries that have
+            counted the highest number of octets or packets.
+
+            If the dsmonAggControlLocked object is equal to 'false',
+            then all entries in this table SHALL be deleted, and the
+            agent will not process TopN reports on behalf of any
+            dsmonHostTopNCtlEntry.
+
+            When the dsmonAggControlLocked object is set to 'true', then
+            particular reports SHOULD be restarted from the beginning,
+            on behalf of all active rows in the dsmonHostTopNCtlTable.
+
+            Note that dsmonHost entries which did not increment at all
+            during the report interval SHOULD NOT be included in
+            dsmonHostTopN reports."
+    ::= { dsmonHostObjects 4 }
+
+dsmonHostTopNEntry OBJECT-TYPE
+    SYNTAX     DsmonHostTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A conceptual row in the dsmonHostTopNTable.
+
+            The dsmonHostTopNCtlIndex value in the index identifies the
+            dsmonHostTopNCtlEntry on whose behalf this entry was
+            created.
+
+            Entries in this table are ordered from 1 to 'N', where lower
+            numbers represent higher values of the rate base object,
+            over the report interval."
+    INDEX { dsmonHostTopNCtlIndex, dsmonHostTopNIndex }
+    ::= { dsmonHostTopNTable 1 }
+
+DsmonHostTopNEntry ::= SEQUENCE {
+    dsmonHostTopNIndex                Integer32,
+    dsmonHostTopNPDLocalIndex         Integer32,
+    dsmonHostTopNAddress              OCTET STRING,
+    dsmonHostTopNAggGroup             DsmonCounterAggGroupIndex,
+    dsmonHostTopNRate                 Gauge32,
+    dsmonHostTopNRateOvfl             Gauge32,
+    dsmonHostTopNHCRate               CounterBasedGauge64
+  }
+
+dsmonHostTopNIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            dsmonHostTopNTable among those in the same report.  This
+            index is between 1 and N, where N is the number of entries
+            in this report."
+    ::= { dsmonHostTopNEntry 1 }
+
+dsmonHostTopNPDLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The protocolDirLocalIndex value which identifies the
+            protocol associated with the dsmonHostTopNAddress object in
+            this entry.
+
+            If the protocolDirEntry associated with the
+            protocolDirLocalIndex with the same value as this object is
+            de-activated or deleted, then the agent MUST delete this
+            dsmonHostTopN entry."
+    ::= { dsmonHostTopNEntry 2 }
+
+dsmonHostTopNAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The dsmonHostAddress value for the network host identified
+            in this entry.  The associated dsmonHostTopNPDLocalIndex
+            object identifies the network protocol type and the encoding
+            rules for this object."
+    ::= { dsmonHostTopNEntry 3 }
+
+dsmonHostTopNAggGroup OBJECT-TYPE
+    SYNTAX      DsmonCounterAggGroupIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The counter aggregation group index value associated with
+            host identified in this entry.  This object identifies the
+            dsmonAggGroupEntry with the same dsmonAggControlIndex value
+            as the associated dsmonHostCtlAggProfile object and the same
+            dsmonAggGroupIndex value as this object."
+    ::= { dsmonHostTopNEntry 4 }
+
+dsmonHostTopNRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of change in the selected variable during this
+            sampling interval.  The selected variable is this host's
+            instance of the object selected by dsmonHostTopNCtlRateBase.
+
+            If the associated dsmonHostTopNCtlRateBase indicates a High
+            Capacity monitoring enumeration, (e.g.
+            'dsmonHostTopNInHCPkts'), then this object will contain the
+            the least significant 32 bits of the associated
+            dsmonHostTopNHCRate object."
+    ::= { dsmonHostTopNEntry 5 }
+
+dsmonHostTopNRateOvfl OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The most significant 32 bits of the associated
+            dsmonHostTopNHCRate object.
+
+            If the associated dsmonHostTopNCtlRateBase is equal to any
+            of the High Capacity monitoring enumerations (e.g.
+            'dsmonHostTopNInHCPkts'), then this object will contain the
+            upper 32 bits of the associated dsmonHostTopNHCRate object.
+
+            If the associated dsmonHostTopNCtlRateBase is not equal to
+            any of High Capacity monitoring enumerations, then this
+            object will contain the value zero.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonHostTopNEntry 6 }
+
+dsmonHostTopNHCRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of change in the selected variable during this
+            sampling interval.  The selected variable is this host's
+            instance of the object selected by dsmonHostTopNCtlRateBase.
+
+            If the associated dsmonHostTopNCtlRateBase is not equal to
+            any of the High Capacity monitoring enumerations (e.g.,
+            'dsmonHostTopNInPkts'), then this object will contain the
+            value zero, and the associated dsmonHostTopNRate object will
+            contain the change in the selected variable during the
+            sampling interval.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonHostTopNEntry 7 }
+
+-- **************************************************************
+-- *                                                            *
+-- *   P E R  -  C O N V E R S I O N    C O L L E C T I O N S   *
+-- *                                                            *
+-- **************************************************************
+
+--
+-- AL Matrix Statistics Control Table
+--
+
+dsmonMatrixCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonMatrixCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Controls setup of per counter aggregation group, per host-
+            pair, application protocol distribution statistics.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonMatrixObjects 1 }
+
+dsmonMatrixCtlEntry OBJECT-TYPE
+    SYNTAX      DsmonMatrixCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonMatrixCtlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonMatrixCtlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+            associated dsmonMatrixSDTable and dsmonMatrixDSTable to be
+            created and maintained by the agent."
+    INDEX { dsmonMatrixCtlIndex }
+    ::= { dsmonMatrixCtlTable 1 }
+
+DsmonMatrixCtlEntry ::= SEQUENCE {
+    dsmonMatrixCtlIndex                Integer32,
+    dsmonMatrixCtlDataSource           DataSource,
+    dsmonMatrixCtlAggProfile           DsmonCounterAggProfileIndex,
+    dsmonMatrixCtlMaxDesiredEntries    Integer32,
+    dsmonMatrixCtlDroppedFrames        Counter32,
+    dsmonMatrixCtlInserts              Counter32,
+    dsmonMatrixCtlDeletes              Counter32,
+    dsmonMatrixCtlCreateTime           LastCreateTime,
+    dsmonMatrixCtlOwner                OwnerString,
+    dsmonMatrixCtlStatus               RowStatus
+}
+
+dsmonMatrixCtlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary and unique index for this
+            dsmonMatrixCtlEntry."
+    ::= { dsmonMatrixCtlEntry 1 }
+
+dsmonMatrixCtlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The source of data for the associated dsmonMatrixSDTable
+            and dsmonMatrixDSTable.
+
+            Note that only packets that contain a network protocol
+            encapsulation which contains a DS field [RFC2474] will be
+            counted in this table.
+
+            This object MUST NOT be modified if the associated
+            dsmonMatrixCtlStatus object is equal to active(1)."
+    ::= { dsmonMatrixCtlEntry 2 }
+
+dsmonMatrixCtlAggProfile OBJECT-TYPE
+    SYNTAX      DsmonCounterAggProfileIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The dsmonAggControlIndex value identifying the counter
+            aggregation profile which should be used on behalf of this
+            dsmonMatrixCtlEntry.
+
+            The associated dsmonAggControlEntry and
+            dsmonAggProfileEntries, identified by the same
+            dsmonAggControlIndex index value, MUST be active in order
+            for this entry to remain active.  It is possible for the
+            counter aggregation configuration to change from a valid to
+            invalid state for this dsmonMatrix collection.  In this
+            case, the associated dsmonMatrixCtlStatus object will be
+            changed to the 'notReady' state, and data collection will
+            not occur on behalf of this control entry.
+
+            Note that an agent MAY choose to limit the actual number of
+            counter aggregation profiles which may be applied to a
+            particular data source.
+
+            This object MUST NOT be modified if the associated
+            dsmonMatrixCtlStatus object is equal to active(1)."
+    ::= { dsmonMatrixCtlEntry 3 }
+
+dsmonMatrixCtlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1 | 1..2147483647)
+    UNITS       "table entries"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of entries that are desired in the
+            dsmonMatrix tables on behalf of this control entry.  The
+            probe will not create more than this number of associated
+            entries in these tables, but may choose to create fewer
+            entries in this table for any reason including the lack of
+            resources.
+
+            If this value is set to -1, the probe may create any number
+            of entries in this table.
+
+            This object MUST NOT be modified if the associated
+            dsmonMatrixCtlStatus object is equal to active(1)."
+    ::= { dsmonMatrixCtlEntry 4 }
+
+dsmonMatrixCtlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "frames"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of frames which were received by the probe
+            and therefore not accounted for in the *StatsDropEvents, but
+            for which the probe chose not to count for the associated
+            dsmonMatrixSD and dsmonMatrixDS entries for whatever reason.
+            Most often, this event occurs when the probe is out of some
+            resources and decides to shed load from this collection.
+
+            This count does not include packets that were not counted
+            because they had MAC-layer errors.
+
+            Note that if the dsmonMatrix tables are inactive because no
+            appropriate protocols are enabled in the protocol directory,
+            this value SHOULD be 0.
+
+            Note that, unlike the dropEvents counter, this number is the
+            exact number of frames dropped."
+    ::= { dsmonMatrixCtlEntry 5 }
+
+dsmonMatrixCtlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a dsmonMatrix entry has been inserted
+            into the dsmonMatrix tables.  If an entry is inserted, then
+            deleted, and then inserted, this counter will be incremented
+            by 2.  The addition of a conversation into both the
+            dsmonMatrixSDTable and dsmonMatrixDSTable shall be counted
+            as two insertions (even though every addition into one table
+            must be accompanied by an insertion into the other).
+
+            To allow for efficient implementation strategies, agents may
+            delay updating this object for short periods of time.  For
+            example, an implementation strategy may allow internal data
+            structures to differ from those visible via SNMP for short
+            periods of time.  This counter may reflect the internal data
+            structures for those short periods of time.  Note that the
+            sum of the dsmonMatrixSDTable and dsmonMatrixDSTable sizes
+            can be determined by subtracting dsmonMatrixCtlDeletes from
+            dsmonMatrixCtlInserts."
+    ::= { dsmonMatrixCtlEntry 6 }
+
+dsmonMatrixCtlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a dsmonMatrix entry has been deleted
+            from the dsmonMatrix tables (for any reason).  If an entry
+            is deleted, then inserted, and then deleted, this counter
+            will be incremented by 2.  The deletion of a conversation
+            from both the dsmonMatrixSDTable and dsmonMatrixDSTable
+            shall be counted as two deletions (even though every
+            deletion from one table must be accompanied by a deletion
+            from the other).
+
+            To allow for efficient implementation strategies, agents MAY
+            delay updating this object for short periods of time.  For
+            example, an implementation strategy may allow internal data
+            structures to differ from those visible via SNMP for short
+            periods of time.  This counter may reflect the internal data
+            structures for those short periods of time.
+
+            Note that the sum of the dsmonMatrixSDTable and
+            dsmonMatrixDSTable sizes can be determined by subtracting
+            dsmonMatrixCtlDeletes from dsmonMatrixCtlInserts."
+    ::= { dsmonMatrixCtlEntry 7 }
+
+dsmonMatrixCtlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this control entry was last
+            activated.  This can be used by the management station to
+            detect if the table has been deleted and recreated between
+            polls."
+    ::= { dsmonMatrixCtlEntry 8 }
+
+dsmonMatrixCtlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonMatrixCtlEntry 9 }
+
+dsmonMatrixCtlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this dsmonMatrixCtlEntry.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonMatrixSDTable and dsmonMatrixDSTable
+            shall be deleted."
+    ::= { dsmonMatrixCtlEntry 10 }
+
+--
+-- AL Matrix SD Statistics Table
+--
+
+dsmonMatrixSDTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonMatrixSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of application traffic matrix entries which collect
+            statistics for conversations of a particular application
+            protocol between two network-level addresses.  This table is
+            indexed first by the source address and then by the
+
+            destination address to make it convenient to collect all
+            statistics from a particular address.
+
+            The probe will add to this table all pairs of addresses for
+            all protocols seen in all packets with no MAC errors, and
+            will increment octet and packet counts in the table for all
+            packets with no MAC errors."
+    ::= { dsmonMatrixObjects 2 }
+
+dsmonMatrixSDEntry OBJECT-TYPE
+    SYNTAX      DsmonMatrixSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonMatrixSDTable.
+
+            The dsmonMatrixCtlIndex value in the index identifies the
+            dsmonMatrixCtlEntry on whose behalf this entry was created.
+
+            The dsmonAggGroupIndex value in the index is determined by
+            examining the DSCP value in each monitored packet, and the
+            dsmonAggProfileTable entry configured for that value."
+    INDEX { dsmonMatrixCtlIndex,
+            dsmonMatrixTimeMark,
+            dsmonAggGroupIndex,
+            dsmonMatrixNLIndex,
+            dsmonMatrixSourceAddress,
+            dsmonMatrixDestAddress,
+            dsmonMatrixALIndex
+           }
+    ::= { dsmonMatrixSDTable 1 }
+
+DsmonMatrixSDEntry ::= SEQUENCE {
+    dsmonMatrixTimeMark                 TimeFilter,
+    dsmonMatrixNLIndex                  Integer32,
+    dsmonMatrixSourceAddress            OCTET STRING,
+    dsmonMatrixDestAddress              OCTET STRING,
+    dsmonMatrixALIndex                  Integer32,
+    dsmonMatrixSDPkts                   ZeroBasedCounter32,
+    dsmonMatrixSDOvflPkts               ZeroBasedCounter32,
+    dsmonMatrixSDHCPkts                 ZeroBasedCounter64,
+    dsmonMatrixSDOctets                 ZeroBasedCounter32,
+    dsmonMatrixSDOvflOctets             ZeroBasedCounter32,
+    dsmonMatrixSDHCOctets               ZeroBasedCounter64,
+    dsmonMatrixSDCreateTime             LastCreateTime
+}
+
+dsmonMatrixTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The Time Filter index for this table.  This object may be
+            used by a management station to retrieve only rows which
+            have been created or modified since a particular time.  Note
+            that the current value for a row are always returned and the
+            TimeFilter is not a historical data archiving mechanism.
+            Refer to RFC 2021 [RFC2021] for a detailed description of
+            TimeFilter operation."
+    ::= { dsmonMatrixSDEntry 1 }
+
+dsmonMatrixNLIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The protocolDirLocalIndex value of a protocolDirEntry
+            representing the specific network layer protocol
+            encapsulation associated with each entry, and the network
+            protocol type of the dsmonMatrixSourceAddress and
+            dsmonMatrixDestAddress objects."
+    ::= { dsmonMatrixSDEntry 2 }
+
+dsmonMatrixSourceAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..54))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The network source address for this dsmonMatrix entry.
+
+            This is represented as an octet string with specific
+            semantics and length as identified by the dsmonMatrixNLIndex
+            component of the index.
+
+            For example, if the dsmonMatrixNLIndex indicates an
+            encapsulation of IPv4, this object is encoded as a length
+            octet of 4, followed by the 4 octets of the IPv4 address, in
+            network byte order."
+    ::= { dsmonMatrixSDEntry 3 }
+
+dsmonMatrixDestAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..54))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The network destination address for this dsmonMatrix entry.
+
+            This is represented as an octet string with specific
+            semantics and length as identified by the dsmonMatrixNLIndex
+            component of the index.
+
+            For example, if the dsmonMatrixNLIndex indicates an
+            encapsulation of IPv4, this object is encoded as a length
+            octet of 4, followed by the 4 octets of the IPv4 address, in
+            network byte order."
+    ::= { dsmonMatrixSDEntry 4 }
+
+dsmonMatrixALIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The protocolDirLocalIndex value of the protocolDirEntry
+            representing the specific application layer protocol
+            associated with each entry.
+
+            It MUST identify an protocolDirEntry which is a direct or
+            indirect descendant of the protocolDirEntry identified by
+            the associated dsmonMatrixNLIndex object."
+    ::= { dsmonMatrixSDEntry 5 }
+
+dsmonMatrixSDPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets of this protocol type (indicated by
+            the associated dsmonMatrixALIndex object) without errors
+            transmitted from the source address to the destination
+            address since this entry was added to the
+            dsmonMatrixSDTable.  Note that this is the number of link-
+            layer packets, so if a single network-layer packet is
+            fragmented into several link-layer frames, this counter is
+            incremented several times."
+    ::= { dsmonMatrixSDEntry 6 }
+
+dsmonMatrixSDOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonMatrixSDPkts
+            counter has overflowed, since this entry was added to the
+            dsmonMatrixSDTable."
+    ::= { dsmonMatrixSDEntry 7 }
+
+dsmonMatrixSDHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonMatrixSDPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonMatrixSDEntry 8 }
+
+dsmonMatrixSDOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets in packets of this protocol type
+            transmitted from the source address to the destination
+            address since this entry was added to the dsmonMatrixSDTable
+            (excluding framing bits but including FCS octets), excluding
+            those octets in packets that contained errors.
+
+            Note this doesn't count just those octets in the particular
+            protocol frames, but includes the entire packet that
+            contained the protocol."
+    ::= { dsmonMatrixSDEntry 9 }
+
+dsmonMatrixSDOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonMatrixSDOctets
+            counter has overflowed, since this entry was added to the
+            dsmonMatrixSDTable."
+    ::= { dsmonMatrixSDEntry 10 }
+
+dsmonMatrixSDHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonMatrixSDPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonMatrixSDEntry 11 }
+
+dsmonMatrixSDCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this entry was last activated.
+            This can be used by the management station to ensure that
+            the entry has not been deleted and recreated between polls."
+    ::= { dsmonMatrixSDEntry 12 }
+
+--
+-- AL Matrix DS Statistics Table
+--
+
+dsmonMatrixDSTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonMatrixDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of application traffic matrix entries which collect
+            statistics for conversations of a particular application
+            protocol between two network-level addresses.  This table is
+            indexed first by the destination address and then by the
+            source address to make it convenient to collect all
+            statistics from a particular address.
+
+            The probe will add to this table all pairs of addresses for
+            all protocols seen in all packets with no MAC errors, and
+            will increment octet and packet counts in the table for all
+            packets with no MAC errors."
+    ::= { dsmonMatrixObjects 3 }
+
+dsmonMatrixDSEntry OBJECT-TYPE
+    SYNTAX      DsmonMatrixDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonMatrixDSTable.  Note that this
+            table is conceptually a re-ordered version of the
+            dsmonMatrixSDTable.  Therefore, all of the index values from
+
+            that table are used by reference, and their semantics are
+            exactly as described in the dsmonMatrixSDTable.
+
+            The dsmonMatrixCtlIndex value in the index identifies the
+            dsmonMatrixCtlEntry on whose behalf this entry was created.
+
+            The dsmonMatrixTimeMark value in the index identifies the
+            Time Filter index for this table.
+
+            The dsmonAggGroupIndex value in the index is determined by
+            examining the DSCP value in each monitored packet, and the
+            dsmonAggProfileTable entry configured for that value.
+
+            The dsmonMatrixNLIndex value in the index identifies the
+            protocolDirLocalIndex value of a protocolDirEntry
+            representing the specific network layer protocol
+            encapsulation associated with each entry, and the network
+            protocol type of the dsmonMatrixSourceAddress and
+            dsmonMatrixDestAddress objects.
+
+            The dsmonMatrixDestAddress value in the index identifies the
+            network destination address for this dsmonMatrix entry.
+
+            The dsmonMatrixSourceAddress value in the index identifies
+            the network source address for this dsmonMatrix entry.
+
+            The dsmonMatrixALIndex value in the index identifies the
+            protocolDirLocalIndex value of the protocolDirEntry
+            representing the specific application layer protocol
+            associated with each entry."
+    INDEX { dsmonMatrixCtlIndex,
+            dsmonMatrixTimeMark,
+            dsmonAggGroupIndex,
+            dsmonMatrixNLIndex,
+            dsmonMatrixDestAddress,
+            dsmonMatrixSourceAddress,
+            dsmonMatrixALIndex
+           }
+    ::= { dsmonMatrixDSTable 1 }
+
+DsmonMatrixDSEntry ::= SEQUENCE {
+    dsmonMatrixDSPkts                   ZeroBasedCounter32,
+    dsmonMatrixDSOvflPkts               ZeroBasedCounter32,
+    dsmonMatrixDSHCPkts                 ZeroBasedCounter64,
+    dsmonMatrixDSOctets                 ZeroBasedCounter32,
+    dsmonMatrixDSOvflOctets             ZeroBasedCounter32,
+    dsmonMatrixDSHCOctets               ZeroBasedCounter64,
+    dsmonMatrixDSCreateTime             LastCreateTime
+
+}
+
+dsmonMatrixDSPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets of this protocol type (indicated by
+            the associated dsmonMatrixALIndex object) without errors
+            transmitted from the source address to the destination
+            address since this entry was added to the
+            dsmonMatrixDSTable.  Note that this is the number of link-
+            layer packets, so if a single network-layer packet is
+            fragmented into several link-layer frames, this counter is
+            incremented several times."
+    ::= { dsmonMatrixDSEntry 1 }
+
+dsmonMatrixDSOvflPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonMatrixDSPkts
+            counter has overflowed, since this entry was added to the
+            dsmonMatrixDSTable."
+    ::= { dsmonMatrixDSEntry 2 }
+
+dsmonMatrixDSHCPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonMatrixDSPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonMatrixDSEntry 3 }
+
+dsmonMatrixDSOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets in packets of this protocol type
+
+            transmitted from the source address to the destination
+            address since this entry was added to the dsmonMatrixDSTable
+            (excluding framing bits but including FCS octets), excluding
+            those octets in packets that contained errors.
+
+            Note this doesn't count just those octets in the particular
+            protocol frames, but includes the entire packet that
+            contained the protocol."
+    ::= { dsmonMatrixDSEntry 4 }
+
+dsmonMatrixDSOvflOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of times the associated dsmonMatrixDSOctets
+            counter has overflowed, since this entry was added to the
+            dsmonMatrixDSTable."
+    ::= { dsmonMatrixDSEntry 5 }
+
+dsmonMatrixDSHCOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The 64-bit version of the dsmonMatrixDSPkts object.
+
+            Note that this object will only be instantiated if the RMON
+            agent supports High Capacity monitoring for a particular
+            dataSource."
+    ::= { dsmonMatrixDSEntry 6 }
+
+dsmonMatrixDSCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this entry was last activated.
+            This can be used by the management station to ensure that
+            the entry has not been deleted and recreated between polls."
+    ::= { dsmonMatrixDSEntry 7 }
+
+--
+-- Per-Protocol Per-Matrix Statistics TopN Control Table
+--
+
+dsmonMatrixTopNCtlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DsmonMatrixTopNCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A set of parameters that control the creation of a report
+            of the top N dsmonMatrix entries according to a selected
+            metric.
+
+            Note that an agent MAY choose to limit the actual number of
+            entries which may be created in this table.  In this case,
+            the agent SHOULD return an error-status of
+            'resourceUnavailable(13)', as per section 4.2.5 of the
+            'Protocol Operations for SNMPv2' specification [RFC1905]."
+    ::= { dsmonMatrixObjects 4 }
+
+dsmonMatrixTopNCtlEntry OBJECT-TYPE
+    SYNTAX      DsmonMatrixTopNCtlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the dsmonMatrixTopNCtlTable.
+
+            Entries are created and deleted from this table by
+            management action only, using the dsmonMatrixTopNCtlStatus
+            RowStatus object.
+
+            The agent SHOULD support non-volatile configuration of this
+            table, and upon system initialization, the table SHOULD be
+            initialized with the saved values.
+
+            Activation of a control row in this table will cause an
+            associated dsmonMatrixTopNTable to be created and maintained
+            by the agent."
+    INDEX { dsmonMatrixTopNCtlIndex }
+    ::= { dsmonMatrixTopNCtlTable 1 }
+
+DsmonMatrixTopNCtlEntry ::= SEQUENCE {
+    dsmonMatrixTopNCtlIndex            Integer32,
+    dsmonMatrixTopNCtlMatrixIndex      Integer32,
+    dsmonMatrixTopNCtlRateBase         INTEGER,
+    dsmonMatrixTopNCtlTimeRemaining    Integer32,
+    dsmonMatrixTopNCtlGeneratedRpts    Counter32,
+    dsmonMatrixTopNCtlDuration         Integer32,
+    dsmonMatrixTopNCtlRequestedSize    Integer32,
+    dsmonMatrixTopNCtlGrantedSize      Integer32,
+    dsmonMatrixTopNCtlStartTime        TimeStamp,
+    dsmonMatrixTopNCtlOwner            OwnerString,
+    dsmonMatrixTopNCtlStatus           RowStatus
+}
+
+dsmonMatrixTopNCtlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            dsmonMatrixTopNCtlTable.  Each such entry defines one Top N
+            report prepared for one RMON dataSource."
+    ::= { dsmonMatrixTopNCtlEntry 1 }
+
+dsmonMatrixTopNCtlMatrixIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The dsmonMatrixSDTable for which a top N report will be
+            prepared on behalf of this entry.  The dsmonMatrixSDTable is
+            identified by the same value of the dsmonMatrixCtlIndex
+            object.
+
+            This object MUST NOT be modified if the associated
+            dsmonMatrixTopNCtlStatus object is equal to active(1)."
+    ::= { dsmonMatrixTopNCtlEntry 2 }
+
+dsmonMatrixTopNCtlRateBase OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  dsmonMatrixTopNPkts(1),
+                  dsmonMatrixTopNOctets(2),
+                  dsmonMatrixTopNHCPkts(3),
+                  dsmonMatrixTopNHCOctets(4)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The variable for each dsmonMatrixSD entry that the
+            dsmonMatrixTopNRate and dsmonMatrixTopNHCRate variables are
+            based upon.  Each dsmonMatrixTopN report generated on behalf
+            of this control entry will be ranked in descending order,
+            based on the associated dsmonMatrixSDTable counter,
+            identified by this object.
+
+            The following table identifies the dsmonMatrixSDTable
+            counters associated with each enumeration:
+
+            Enumeration                 RateBase MIB Objects
+
+            -----------                 --------------------
+            dsmonMatrixTopNPkts         dsmonMatrixSDPkts
+            dsmonMatrixTopNOctets       dsmonMatrixSDOctets
+            dsmonMatrixTopNHCPkts       dsmonMatrixSDHCPkts
+            dsmonMatrixTopNHCOctets     dsmonMatrixSDHCOctets
+
+            The following enumerations are only available if the agent
+            supports High Capacity monitoring:
+
+            dsmonMatrixTopNHCPkts
+            dsmonMatrixTopNHCOctets
+
+            This object MUST NOT be modified if the associated
+            dsmonMatrixTopNCtlStatus object is equal to active(1)."
+    ::= { dsmonMatrixTopNCtlEntry 3 }
+
+dsmonMatrixTopNCtlTimeRemaining OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds left in the report currently being
+            collected.  When this object is modified by the management
+            station, a new collection is started, possibly aborting a
+            currently running report.  The new value is used as the
+            requested duration of this report, and is immediately loaded
+            into the associated dsmonMatrixTopNCtlDuration object.
+
+            When the report finishes, the probe will automatically start
+            another collection with the same initial value of
+            dsmonMatrixTopNCtlTimeRemaining.  Thus the management
+            station may simply read the resulting reports repeatedly,
+            checking the startTime and duration each time to ensure that
+            a report was not missed or that the report parameters were
+            not changed.
+
+            While the value of this object is non-zero, it decrements by
+            one per second until it reaches zero.  At the time that this
+            object decrements to zero, the report is made accessible in
+            the dsmonMatrixTopNTable, overwriting any report that may be
+            there.
+
+            When this object is modified by the management station, any
+            associated entries in the dsmonMatrixTopNTable shall be
+            deleted."
+    DEFVAL { 1800 }
+    ::= { dsmonMatrixTopNCtlEntry 4 }
+
+dsmonMatrixTopNCtlGeneratedRpts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "reports"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of reports that have been generated by this
+            entry."
+    ::= { dsmonMatrixTopNCtlEntry 5 }
+
+dsmonMatrixTopNCtlDuration OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds that this report has collected during
+            the last sampling interval.
+
+            When the associated dsmonMatrixTopNCtlTimeRemaining object
+            is set, this object shall be set by the probe to the same
+            value and shall not be modified until the next time the
+            dsmonMatrixTopNCtlTimeRemaining is set.
+
+            This value shall be zero if no reports have been requested
+            for this dsmonMatrixTopNCtlEntry."
+    ::= { dsmonMatrixTopNCtlEntry 6 }
+
+dsmonMatrixTopNCtlRequestedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "table entries"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of dsmonMatrix entries requested for
+            this report.
+
+            When this object is created or modified, the probe SHOULD
+            set dsmonMatrixTopNCtlGrantedSize as closely to this object
+            as is possible for the particular probe implementation and
+            available resources."
+    DEFVAL { 150 }
+    ::= { dsmonMatrixTopNCtlEntry 7 }
+
+dsmonMatrixTopNCtlGrantedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "table entries"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of dsmonMatrix entries in this report.
+
+            When the associated dsmonMatrixTopNCtlRequestedSize object
+            is created or modified, the probe SHOULD set this object as
+            closely to the requested value as is possible for the
+            particular implementation and available resources.  The
+            probe MUST NOT lower this value except as a result of a
+            set to the associated dsmonMatrixTopNCtlRequestedSize
+            object.
+
+            Protocol entries with the highest value of
+            dsmonMatrixTopNRate or dsmonMatrixTopNHCRate (depending on
+            the value of the associated dsmonMatrixTopNCtlRateBase
+            object) shall be placed in this table in decreasing order of
+            this rate until there is no more room or until there are no
+            more dsmonMatrix entries."
+    ::= { dsmonMatrixTopNCtlEntry 8 }
+
+dsmonMatrixTopNCtlStartTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when this top N report was last
+            started.  In other words, this is the time that the
+            associated dsmonMatrixTopNCtlTimeRemaining object was
+            modified to start the requested report or the time the
+            report was last automatically (re)started.
+
+            This object may be used by the management station to
+            determine if a report was missed or not."
+    ::= { dsmonMatrixTopNCtlEntry 9 }
+
+dsmonMatrixTopNCtlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { dsmonMatrixTopNCtlEntry 10 }
+
+dsmonMatrixTopNCtlStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this dsmonMatrixTopNCtlEntry.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value.
+
+            If this object is not equal to active(1), all associated
+            entries in the dsmonMatrixTopNTable shall be deleted by the
+            agent."
+    ::= { dsmonMatrixTopNCtlEntry 11 }
+
+--
+-- dsmonMatrix TopN Table
+--
+
+dsmonMatrixTopNTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF DsmonMatrixTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A set of statistics for those dsmonMatrix entries that have
+            counted the highest number of octets or packets.
+
+            If the dsmonAggControlLocked object is equal to 'false',
+            then all entries in this table SHALL be deleted, and the
+            agent will not process TopN reports on behalf of any
+            dsmonMatrixTopNCtlEntry.
+
+            When the dsmonAggControlLocked object is set to 'true', then
+            particular reports SHOULD be restarted from the beginning,
+            on behalf of all active rows in the dsmonMatrixTopNCtlTable.
+
+            Note that dsmonMatrix entries which did not increment at all
+            during the report interval SHOULD NOT be included in
+            dsmonMatrixTopN reports."
+    ::= { dsmonMatrixObjects 5 }
+
+dsmonMatrixTopNEntry OBJECT-TYPE
+    SYNTAX     DsmonMatrixTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A conceptual row in the dsmonMatrixTopNTable.
+
+            The dsmonMatrixTopNCtlIndex value in the index identifies
+            the dsmonMatrixTopNCtlEntry on whose behalf this entry was
+            created.
+
+            Entries in this table are ordered from 1 to 'N', where lower
+            numbers represent higher values of the rate base object,
+            over the report interval."
+    INDEX { dsmonMatrixTopNCtlIndex, dsmonMatrixTopNIndex }
+    ::= { dsmonMatrixTopNTable 1 }
+
+DsmonMatrixTopNEntry ::= SEQUENCE {
+    dsmonMatrixTopNIndex                Integer32,
+    dsmonMatrixTopNAggGroup             DsmonCounterAggGroupIndex,
+    dsmonMatrixTopNNLIndex              Integer32,
+    dsmonMatrixTopNSourceAddress        OCTET STRING,
+    dsmonMatrixTopNDestAddress          OCTET STRING,
+    dsmonMatrixTopNALIndex              Integer32,
+    dsmonMatrixTopNPktRate              Gauge32,
+    dsmonMatrixTopNPktRateOvfl          Gauge32,
+    dsmonMatrixTopNHCPktRate            CounterBasedGauge64,
+    dsmonMatrixTopNRevPktRate           Gauge32,
+    dsmonMatrixTopNRevPktRateOvfl       Gauge32,
+    dsmonMatrixTopNHCRevPktRate         CounterBasedGauge64,
+    dsmonMatrixTopNOctetRate            Gauge32,
+    dsmonMatrixTopNOctetRateOvfl        Gauge32,
+    dsmonMatrixTopNHCOctetRate          CounterBasedGauge64,
+    dsmonMatrixTopNRevOctetRate         Gauge32,
+    dsmonMatrixTopNRevOctetRateOvfl     Gauge32,
+    dsmonMatrixTopNHCRevOctetRate       CounterBasedGauge64
+  }
+
+dsmonMatrixTopNIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            dsmonMatrixTopNTable among those in the same report.  This
+            index is between 1 and N, where N is the number of entries
+            in this report."
+    ::= { dsmonMatrixTopNEntry 1 }
+
+dsmonMatrixTopNAggGroup OBJECT-TYPE
+    SYNTAX      DsmonCounterAggGroupIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The counter aggregation group index value associated with
+            host identified in this entry.  This object identifies the
+            dsmonAggGroupEntry with the same dsmonAggControlIndex value
+            as the associated dsmonMatrixCtlAggProfile object and the
+            same dsmonAggGroupIndex value as this object."
+    ::= { dsmonMatrixTopNEntry 2 }
+
+dsmonMatrixTopNNLIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The protocolDirLocalIndex value which identifies the
+            protocol associated with the dsmonMatrixTopNSourceAddress
+            and dsmonMatrixTopNDestAddress objects in this entry.
+
+            If the protocolDirEntry associated with the
+            protocolDirLocalIndex with the same value as this object is
+            de-activated or deleted, then the agent MUST delete this
+            dsmonMatrixTopN entry."
+    ::= { dsmonMatrixTopNEntry 3 }
+
+dsmonMatrixTopNSourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The dsmonMatrixSDSourceAddress value for the source network
+            host identified in this entry.  The associated
+            dsmonMatrixTopNNLIndex object identifies the network
+            protocol type and the encoding rules for this object."
+    ::= { dsmonMatrixTopNEntry 4 }
+
+dsmonMatrixTopNDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The dsmonMatrixSDDestAddress value for the destination
+            network host identified in this entry.  The associated
+            dsmonMatrixTopNNLIndex object identifies the network
+            protocol type and the encoding rules for this object."
+    ::= { dsmonMatrixTopNEntry 5 }
+
+dsmonMatrixTopNALIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The protocolDirLocalIndex value which identifies the
+            application protocol associated with this entry.
+
+            If the protocolDirEntry associated with the
+
+            protocolDirLocalIndex with the same value as this object is
+            de-activated or deleted, then the agent MUST delete this
+            dsmonMatrixTopN entry."
+    ::= { dsmonMatrixTopNEntry 6 }
+
+dsmonMatrixTopNPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets seen of this protocol from the source
+            host to the destination host during this sampling interval,
+            counted using the rules for counting the dsmonMatrixSDPkts
+            object.
+
+            If the value of dsmonMatrixTopNCtlRateBase is
+            dsmonMatrixTopNPkts, this variable will be used to sort this
+            report.
+
+            If the value of the dsmonMatrixTopNCtlRateBase is
+            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
+            object will contain the the least significant 32 bits of the
+            associated dsmonMatrixTopNHCPktRate object."
+    ::= { dsmonMatrixTopNEntry 7 }
+
+dsmonMatrixTopNPktRateOvfl OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The most significant 32 bits of the associated
+            dsmonMatrixTopNHCPktRate object.
+
+            If the associated dsmonMatrixTopNCtlRateBase is equal to
+            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
+            object will contain the most significant 32 bits of the
+            associated dsmonMatrixTopNHCPktRate object, otherwise this
+            object will contain the value zero.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 8 }
+
+dsmonMatrixTopNHCPktRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets seen of this protocol from the source
+            host to the destination host during this sampling interval,
+            counted using the rules for counting the dsmonMatrixSDHCPkts
+            object.
+
+            If the value of dsmonMatrixTopNCtlRateBase is
+            dsmonMatrixTopNHCPkts, this variable will be used to sort
+            this report.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 9 }
+
+dsmonMatrixTopNRevPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets seen of this protocol from the
+            destination host to the source host during this sampling
+            interval, counted using the rules for counting the
+            dsmonMatrixDSPkts object  (note that the corresponding
+            dsmonMatrixSDPkts object selected is the one whose source
+            address is equal to dsmonMatrixTopNDestAddress and whose
+            destination address is equal to
+            dsmonMatrixTopNSourceAddress.)"
+    ::= { dsmonMatrixTopNEntry 10 }
+
+dsmonMatrixTopNRevPktRateOvfl OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The most significant 32 bits of the associated
+            dsmonMatrixTopNHCRevPktRate object.
+
+            If the associated dsmonMatrixTopNCtlRateBase is equal to
+            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOCtets, then this
+            object will contain the most significant 32 bits of the
+            associated dsmonMatrixTopNHCRevPktRate object, otherwise
+            this object will contain the value zero.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 11 }
+
+dsmonMatrixTopNHCRevPktRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets seen of this protocol from the
+            destination host to the source host during this sampling
+            interval, counted using the rules for counting the
+            dsmonMatrixDSHCPkts object  (note that the corresponding
+            dsmonMatrixSDHCPkts object selected is the one whose source
+            address is equal to dsmonMatrixTopNDestAddress and whose
+            destination address is equal to
+            dsmonMatrixTopNSourceAddress.)
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 12 }
+
+dsmonMatrixTopNOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets seen of this protocol from the source
+            host to the destination host during this sampling interval,
+            counted using the rules for counting the dsmonMatrixSDOctets
+            object.
+
+            If the value of dsmonMatrixTopNCtlRateBase is
+            dsmonMatrixTopNOctets, this variable will be used to sort
+            this report.
+
+            If the value of the dsmonMatrixTopNCtlRateBase is
+            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
+            object will contain the the least significant 32 bits of the
+            associated dsmonMatrixTopNHCPktRate object."
+    ::= { dsmonMatrixTopNEntry 13 }
+
+dsmonMatrixTopNOctetRateOvfl OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The most significant 32 bits of the associated
+            dsmonMatrixTopNHCOctetRate object.
+
+            If the associated dsmonMatrixTopNCtlRateBase is equal to
+            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOctets, then this
+            object will contain the most significant 32 bits of the
+            associated dsmonMatrixTopNHCOctetRate object, otherwise this
+
+            object will contain the value zero.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 14 }
+
+dsmonMatrixTopNHCOctetRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets seen of this protocol from the source
+            host to the destination host during this sampling interval,
+            counted using the rules for counting the
+            dsmonMatrixSDHCOctets object.
+
+            If the value of dsmonMatrixTopNCtlRateBase is
+            dsmonMatrixTopNHCOctets, this variable will be used to sort
+            this report.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 15 }
+
+dsmonMatrixTopNRevOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets seen of this protocol from the
+            destination host to the source host during this sampling
+            interval, counted using the rules for counting the
+            dsmonMatrixDSOctets object  (note that the corresponding
+            dsmonMatrixSDOctets object selected is the one whose source
+            address is equal to dsmonMatrixTopNDestAddress and whose
+            destination address is equal to
+            dsmonMatrixTopNSourceAddress.)"
+    ::= { dsmonMatrixTopNEntry 16 }
+
+dsmonMatrixTopNRevOctetRateOvfl OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The most significant 32 bits of the associated
+            dsmonMatrixTopNHCRevOctetRate object.
+
+            If the associated dsmonMatrixTopNCtlRateBase is equal to
+
+            dsmonMatrixTopNHCPkts or dsmonMatrixTopNHCOCtets, then this
+            object will contain the most significant 32 bits of the
+            associated dsmonMatrixTopNHCRevPktRate object, otherwise
+            this object will contain the value zero.
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 17 }
+
+dsmonMatrixTopNHCRevOctetRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets seen of this protocol from the
+            destination host to the source host during this sampling
+            interval, counted using the rules for counting the
+            dsmonMatrixDSHCOctets object  (note that the corresponding
+            dsmonMatrixSDHCOctets object selected is the one whose
+            source address is equal to dsmonMatrixTopNDestAddress and
+            whose destination address is equal to
+            dsmonMatrixTopNSourceAddress.)
+
+            The agent MAY choose not to instantiate this object if High
+            Capacity monitoring is not supported."
+    ::= { dsmonMatrixTopNEntry 18 }
+
+--
+-- Conformance Section
+--
+
+dsmonCompliances OBJECT IDENTIFIER ::= { dsmonConformance 1 }
+dsmonGroups      OBJECT IDENTIFIER ::= { dsmonConformance 2 }
+
+--
+-- Compliance for agents that do not support HC or Counter64
+--
+
+dsmonCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "Describes the requirements for conformance to the
+            Differentiated Services Monitoring MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           dsmonCounterAggControlGroup,
+                           dsmonStatsGroup,
+                           dsmonCapsGroup
+
+                         }
+
+        GROUP   dsmonStatsHCGroup
+        DESCRIPTION
+            "The dsmonStatsHCGroup is mandatory for systems which
+            implement High Capacity monitoring."
+
+        GROUP   dsmonPdistGroup
+        DESCRIPTION
+            "The dsmonPdistGroup is mandatory for systems which
+            implement RMON-2 protocolDirTable based protocol
+            distribution monitoring."
+
+        GROUP  dsmonPdistHCGroup
+        DESCRIPTION
+            "The dsmonPdistHCGroup is mandatory for systems which
+            implement RMON-2 protocolDirTable based protocol
+            distribution monitoring on high capacity interfaces."
+
+        GROUP  dsmonHostGroup
+        DESCRIPTION
+            "The dsmonHostGroup is mandatory for systems which implement
+            RMON-2 nlHostTable based network protocol monitoring."
+
+        GROUP  dsmonHostHCGroup
+        DESCRIPTION
+            "The dsmonHostHCGroup is mandatory for systems which
+            implement RMON-2 nlHostTable based network protocol
+            monitoring, on high capacity interfaces."
+
+        GROUP  dsmonMatrixGroup
+        DESCRIPTION
+            "The dsmonMatrixGroup is mandatory for systems which
+            implement RMON-2 alMatrix based application protocol
+            monitoring."
+
+        GROUP  dsmonMatrixHCGroup
+        DESCRIPTION
+            "The dsmonMatrixHCGroup is mandatory for systems which
+            implement RMON-2 alMatrix based application protocol
+            monitoring, on high capacity interfaces."
+    ::= { dsmonCompliances 1 }
+
+--
+-- Compliance for agents that support HC and Counter64
+--
+
+dsmonHCCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "Describes the requirements for conformance to the
+            Differentiated Services Monitoring MIB for agents which also
+            support High Capacity monitoring and the Counter64 data
+            type."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           dsmonCounterAggControlGroup,
+                           dsmonStatsGroup,
+                           dsmonStatsHCGroup,
+                           dsmonCapsGroup
+                         }
+
+        GROUP   dsmonPdistGroup
+        DESCRIPTION
+            "The dsmonPdistGroup is mandatory for systems which
+            implement RMON-2 protocolDirTable based protocol
+            distribution monitoring."
+
+        GROUP  dsmonPdistHCGroup
+        DESCRIPTION
+            "The dsmonPdistHCGroup is mandatory for systems which
+            implement RMON-2 protocolDirTable based protocol
+            distribution monitoring."
+
+        GROUP  dsmonHostGroup
+        DESCRIPTION
+            "The dsmonHostGroup is mandatory for systems which implement
+            RMON-2 nlHostTable based network protocol monitoring."
+
+        GROUP  dsmonHostHCGroup
+        DESCRIPTION
+            "The dsmonHostHCGroup is mandatory for systems which
+            implement RMON-2 nlHostTable based network protocol
+            monitoring."
+
+        GROUP  dsmonMatrixGroup
+        DESCRIPTION
+            "The dsmonMatrixGroup is mandatory for systems which
+            implement RMON-2 alMatrix based application protocol
+            monitoring."
+
+        GROUP  dsmonMatrixHCGroup
+        DESCRIPTION
+            "The dsmonMatrixHCGroup is mandatory for systems which
+            implement RMON-2 alMatrix based application protocol
+
+            monitoring."
+    ::= { dsmonCompliances 2 }
+
+--
+-- Compliance for agents that support HC, but not Counter64
+--
+
+dsmonHCNoC64Compliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "Describes the requirements for conformance to the
+            Differentiated Services Monitoring MIB for an agent which
+            supports high capacity monitoring, but does not support the
+            Counter64 data type (e.g., only supports the SNMPv1
+            protocol)."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           dsmonCounterAggControlGroup,
+                           dsmonStatsGroup,
+                           dsmonStatsOvflGroup,
+                           dsmonCapsGroup
+                         }
+
+        GROUP   dsmonStatsHCGroup
+        DESCRIPTION
+            "Implementation of the dsmonStatsHCGroup is not required.
+            High Capacity monitoring."
+
+        GROUP   dsmonPdistGroup
+        DESCRIPTION
+            "The dsmonPdistGroup is mandatory for systems which
+            implement RMON-2 protocolDirTable based protocol
+            distribution monitoring."
+
+        GROUP   dsmonPdistOvflGroup
+        DESCRIPTION
+            "The dsmonPdistGroup is mandatory for systems which
+            implement RMON-2 protocolDirTable based protocol
+            distribution monitoring."
+
+        GROUP  dsmonPdistHCGroup
+        DESCRIPTION
+            "Implementation of the dsmonPdistHCGroup is not required."
+
+        GROUP  dsmonHostGroup
+        DESCRIPTION
+            "The dsmonHostGroup is mandatory for systems which implement
+
+            RMON-2 nlHostTable based network protocol monitoring."
+
+        GROUP  dsmonHostOvflGroup
+        DESCRIPTION
+            "The dsmonHostGroup is mandatory for systems which implement
+            RMON-2 nlHostTable based network protocol monitoring."
+
+        GROUP  dsmonHostHCGroup
+        DESCRIPTION
+            "Implementation of the dsmonHostHCGroup is not required."
+
+        GROUP  dsmonMatrixGroup
+        DESCRIPTION
+            "The dsmonMatrixGroup is mandatory for systems which
+            implement RMON-2 alMatrix based application protocol
+            monitoring."
+
+        GROUP  dsmonMatrixOvflGroup
+        DESCRIPTION
+            "The dsmonMatrixGroup is mandatory for systems which
+            implement RMON-2 alMatrix based application protocol
+            monitoring."
+
+        GROUP  dsmonMatrixHCGroup
+        DESCRIPTION
+            "Implementation of the dsmonMatrixHCGroup is not required."
+    ::= { dsmonCompliances 3 }
+
+-- Object Groups
+
+dsmonCounterAggControlGroup OBJECT-GROUP
+    OBJECTS {
+             dsmonMaxAggGroups,
+             dsmonAggControlLocked,
+             dsmonAggControlChanges,
+             dsmonAggControlLastChangeTime,
+             dsmonAggControlDescr,
+             dsmonAggControlOwner,
+             dsmonAggControlStatus,
+             dsmonAggGroupIndex,
+             dsmonAggGroupDescr,
+             dsmonAggGroupStatus
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects used to configure and manage
+            counter aggregation groups for DSMON collection purposes."
+    ::= { dsmonGroups 1 }
+
+dsmonStatsGroup OBJECT-GROUP
+    OBJECTS {
+             dsmonStatsControlDataSource,
+             dsmonStatsControlAggProfile,
+             dsmonStatsControlDroppedFrames,
+             dsmonStatsControlCreateTime,
+             dsmonStatsControlOwner,
+             dsmonStatsControlStatus,
+             dsmonStatsInPkts,
+             dsmonStatsInOctets,
+             dsmonStatsOutPkts,
+             dsmonStatsOutOctets
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per DSCP statistics."
+    ::= { dsmonGroups 2 }
+
+dsmonStatsOvflGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonStatsInOvflPkts,
+            dsmonStatsInOvflOctets,
+            dsmonStatsOutOvflPkts,
+            dsmonStatsOutOvflOctets
+    }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing per-DSCP overflow
+            counters for systems with high capacity data sources, but
+            without support for the Counter64 data type."
+    ::= { dsmonGroups 3 }
+
+dsmonStatsHCGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonStatsInHCPkts,
+            dsmonStatsInHCOctets,
+            dsmonStatsOutHCPkts,
+            dsmonStatsOutHCOctets
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per DSCP statistics for
+            high capacity data sources."
+    ::= { dsmonGroups 4 }
+
+dsmonPdistGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonPdistCtlDataSource,
+            dsmonPdistCtlAggProfile,
+            dsmonPdistCtlMaxDesiredEntries,
+            dsmonPdistCtlDroppedFrames,
+            dsmonPdistCtlInserts,
+            dsmonPdistCtlDeletes,
+            dsmonPdistCtlCreateTime,
+            dsmonPdistCtlOwner,
+            dsmonPdistCtlStatus,
+            dsmonPdistStatsPkts,
+            dsmonPdistStatsOctets,
+            dsmonPdistStatsCreateTime,
+            dsmonPdistTopNCtlPdistIndex,
+            dsmonPdistTopNCtlRateBase,
+            dsmonPdistTopNCtlTimeRemaining,
+            dsmonPdistTopNCtlGeneratedReprts,
+            dsmonPdistTopNCtlDuration,
+            dsmonPdistTopNCtlRequestedSize,
+            dsmonPdistTopNCtlGrantedSize,
+            dsmonPdistTopNCtlStartTime,
+            dsmonPdistTopNCtlOwner,
+            dsmonPdistTopNCtlStatus,
+            dsmonPdistTopNPDLocalIndex,
+            dsmonPdistTopNAggGroup,
+            dsmonPdistTopNRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per protocol DSCP
+            monitoring extensions to the RMON-2 MIB."
+    ::= { dsmonGroups 5 }
+
+dsmonPdistOvflGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonPdistStatsOvflPkts,
+            dsmonPdistStatsOvflOctets,
+            dsmonPdistTopNRateOvfl
+    }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing per-protocol DSCP
+            overflow counters for systems with high capacity data
+            sources, but without support for the Counter64 data type."
+    ::= { dsmonGroups 6 }
+
+dsmonPdistHCGroup OBJECT-GROUP
+
+    OBJECTS {
+            dsmonPdistStatsHCPkts,
+            dsmonPdistStatsHCOctets,
+            dsmonPdistTopNHCRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per protocol DSCP
+            monitoring extensions to the RMON-2 MIB for High Capacity
+            networks."
+    ::= { dsmonGroups 7 }
+
+dsmonHostGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonHostCtlDataSource,
+            dsmonHostCtlAggProfile,
+            dsmonHostCtlMaxDesiredEntries,
+            dsmonHostCtlIPv4PrefixLen,
+            dsmonHostCtlIPv6PrefixLen,
+            dsmonHostCtlDroppedFrames,
+            dsmonHostCtlInserts,
+            dsmonHostCtlDeletes,
+            dsmonHostCtlCreateTime,
+            dsmonHostCtlOwner,
+            dsmonHostCtlStatus,
+            dsmonHostInPkts,
+            dsmonHostInOctets,
+            dsmonHostOutPkts,
+            dsmonHostOutOctets,
+            dsmonHostCreateTime,
+            dsmonHostTopNCtlHostIndex,
+            dsmonHostTopNCtlRateBase,
+            dsmonHostTopNCtlTimeRemaining,
+            dsmonHostTopNCtlGeneratedReports,
+            dsmonHostTopNCtlDuration,
+            dsmonHostTopNCtlRequestedSize,
+            dsmonHostTopNCtlGrantedSize,
+            dsmonHostTopNCtlStartTime,
+            dsmonHostTopNCtlOwner,
+            dsmonHostTopNCtlStatus,
+            dsmonHostTopNPDLocalIndex,
+            dsmonHostTopNAddress,
+            dsmonHostTopNAggGroup,
+            dsmonHostTopNRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per Host monitoring
+
+            functions."
+    ::= { dsmonGroups 8 }
+
+dsmonHostOvflGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonHostInOvflPkts,
+            dsmonHostInOvflOctets,
+            dsmonHostOutOvflPkts,
+            dsmonHostOutOvflOctets,
+            dsmonHostTopNRateOvfl
+    }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing per host DSCP overflow
+            counters for systems with high capacity data sources, but
+            without support for the Counter64 data type."
+    ::= { dsmonGroups 9 }
+
+dsmonHostHCGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonHostInHCPkts,
+            dsmonHostInHCOctets,
+            dsmonHostOutHCPkts,
+            dsmonHostOutHCOctets,
+            dsmonHostTopNHCRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per Host monitoring
+            functions for High Capacity networks."
+    ::= { dsmonGroups 10 }
+
+dsmonCapsGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonCapabilities
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing an indication of the
+            DSMON monitoring functions supported by the agent."
+    ::= { dsmonGroups 11 }
+
+dsmonMatrixGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonMatrixCtlDataSource,
+            dsmonMatrixCtlAggProfile,
+            dsmonMatrixCtlMaxDesiredEntries,
+            dsmonMatrixCtlDroppedFrames,
+            dsmonMatrixCtlInserts,
+            dsmonMatrixCtlDeletes,
+            dsmonMatrixCtlCreateTime,
+            dsmonMatrixCtlOwner,
+            dsmonMatrixCtlStatus,
+            dsmonMatrixSDPkts,
+            dsmonMatrixSDOctets,
+            dsmonMatrixSDCreateTime,
+            dsmonMatrixDSPkts,
+            dsmonMatrixDSOctets,
+            dsmonMatrixDSCreateTime,
+            dsmonMatrixTopNCtlMatrixIndex,
+            dsmonMatrixTopNCtlRateBase,
+            dsmonMatrixTopNCtlTimeRemaining,
+            dsmonMatrixTopNCtlGeneratedRpts,
+            dsmonMatrixTopNCtlDuration,
+            dsmonMatrixTopNCtlRequestedSize,
+            dsmonMatrixTopNCtlGrantedSize,
+            dsmonMatrixTopNCtlStartTime,
+            dsmonMatrixTopNCtlOwner,
+            dsmonMatrixTopNCtlStatus,
+            dsmonMatrixTopNAggGroup,
+            dsmonMatrixTopNNLIndex,
+            dsmonMatrixTopNSourceAddress,
+            dsmonMatrixTopNDestAddress,
+            dsmonMatrixTopNALIndex,
+            dsmonMatrixTopNPktRate,
+            dsmonMatrixTopNRevPktRate,
+            dsmonMatrixTopNOctetRate,
+            dsmonMatrixTopNRevOctetRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per conversation
+            monitoring functions."
+    ::= { dsmonGroups 12 }
+
+dsmonMatrixOvflGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonMatrixSDOvflPkts,
+            dsmonMatrixSDOvflOctets,
+            dsmonMatrixDSOvflPkts,
+            dsmonMatrixDSOvflOctets,
+            dsmonMatrixTopNPktRateOvfl,
+            dsmonMatrixTopNRevPktRateOvfl,
+            dsmonMatrixTopNOctetRateOvfl,
+            dsmonMatrixTopNRevOctetRateOvfl
+    }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing per conversation
+            monitoring functions for systems with high capacity data
+            sources, but without support for the Counter64 data type."
+    ::= { dsmonGroups 13 }
+
+dsmonMatrixHCGroup OBJECT-GROUP
+    OBJECTS {
+            dsmonMatrixSDHCPkts,
+            dsmonMatrixSDHCOctets,
+            dsmonMatrixDSHCPkts,
+            dsmonMatrixDSHCOctets,
+            dsmonMatrixTopNHCPktRate,
+            dsmonMatrixTopNHCRevPktRate,
+            dsmonMatrixTopNHCOctetRate,
+            dsmonMatrixTopNHCRevOctetRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing per conversation
+            monitoring functions for High Capacity networks."
+    ::= { dsmonGroups 14 }
+
+END
diff --git a/snmp_builder/mibs/DVB-RCS-MIB.mib b/snmp_builder/mibs/DVB-RCS-MIB.mib
new file mode 100644
index 0000000..310a0fd
--- /dev/null
+++ b/snmp_builder/mibs/DVB-RCS-MIB.mib
@@ -0,0 +1,3329 @@
+DVB-RCS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Integer32,
+    Unsigned32,
+    transmission
+        FROM SNMPv2-SMI          -- [RFC2578]
+    TEXTUAL-CONVENTION,
+    RowStatus
+        FROM SNMPv2-TC           -- [RFC2579]
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE
+        FROM SNMPv2-CONF         -- [RFC2580]
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB  -- [RFC3411]
+    InetAddressType,
+    InetAddress,
+    InetAddressPrefixLength,
+    InetPortNumber
+        FROM INET-ADDRESS-MIB    -- [RFC4001]
+    Uri
+        FROM URI-TC-MIB          -- [RFC5017]
+    Dscp,
+    DscpOrAny
+        FROM DIFFSERV-DSCP-TC    -- [RFC3289]
+    ;
+
+dvbRcsMib MODULE-IDENTITY
+    LAST-UPDATED "201002161200Z"
+    ORGANIZATION "The SatLabs Group"
+    CONTACT-INFO
+           "The SatLabs Group
+            Web:    www.satlabs.org
+            E-mail: info@satlabs.org"
+    DESCRIPTION
+        "DVB-RCS MIB subtree.
+
+         This MIB module applies to equipment that is a Return
+         Channel Satellite Terminal (RCST), defined in the Digital
+         Video Broadcasting Return Channel via Satellite system
+         (DVB-RCS) standard (ETSI EN 301 790 Digital Video
+         Broadcasting (DVB); Interaction Channel for Satellite
+         Distribution Systems, European Telecommunications
+         Standards Institute (ETSI)).
+
+         It defines a set of MIB objects to characterize the
+         behavior and performance of network-layer entities
+         implementing DVB-RCS.
+         This MIB module is intended to be used by DVB-RCS
+         equipment following the SatLabs System Recommendations,
+         defined by the SatLabs Group and available at
+         www.satlabs.org.
+         Note that, if not stated otherwise in the object
+         DESCRIPTION clause, all writable objects are
+         persistent.
+
+         Copyright (C) The IETF Trust (2010).  This version of
+         this MIB module is part of RFC 5728; see the RFC itself
+         for full legal notices."
+    REVISION "200907201200Z"
+    DESCRIPTION
+        "Revision of this MIB module, following MIB doctor review
+        and adjustments based on the MIB authoring guidelines
+        from the IETF."
+        ::= { transmission 239 }
+
+--==============================================================
+-- Textual Conventions
+--==============================================================
+DvbRcsSatLabsProfileMap ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This textual convention enumerates the declaration of
+        the SatLabs-defined terminal profiles.  The mapping to
+        the profiles is to be understood as described here.  (0)
+        refers to the most significant bit.
+
+         dvbs(0) -> DVBS profile (DVB-S support)
+         dvbs2ccm(1) -> DVB-S2 CCM profile (CCM support)
+         dvbs2acm(2) -> DVB-S2 ACM profile (CCM, VCM and ACM
+         support)"
+    REFERENCE
+       "SatLabs System Recommendations, available at
+       www.satlabs.org."
+    SYNTAX BITS     {
+            dvbs(0),
+            dvbs2ccm(1),
+            dvbs2acm(2),
+            spare1(3),
+            spare2(4),
+            spare3(5),
+            spare4(6),
+            spare5(7),
+            spare6(8),
+            spare7(9),
+            spare8(10),
+            spare9(11),
+            spare10(12),
+            spare11(13),
+            spare12(14),
+            spare13(15),
+            spare14(16),
+            spare15(17),
+            spare16(18),
+            spare17(19),
+            spare18(20),
+            spare19(21),
+            spare20(22),
+            spare21(23),
+            spare22(24),
+            spare23(25),
+            spare24(26),
+            spare25(27),
+            spare26(28),
+            spare27(29),
+            spare28(30),
+            spare29(31)
+            }
+
+DvbRcsSatLabsOptionMap ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This textual convention enumerates the declaration of
+        the SatLabs-defined options.  A value of 1 indicates
+        that the respective option is supported.  The mapping
+        to the options is to be understood as described here.
+        (0) refers to the most significant bit.
+
+            mpegTrf(0) -> MPEG_TRF
+            coarseSync(1) -> COARSE_SYNC
+            wideHop(2) -> WIDE_HOPP
+            fastHop(3) -> FAST_HOPP
+            dynamicMfTdma(4) -> Dynamic_MF_TDMA
+            contentionSync(5) -> CONTENTION_SYNC
+            qpskLow(6) -> QPSKLOW
+            mod16Apsk(7) -> 16APSK
+            mod32Apsk(8) -> 32APSK
+            normalFec(9) -> NORMALFEC
+            multiTs(10) -> MULTITS
+            gsTs(11) -> GSTS
+            enhQoS(12) -> ENHQOS
+
+            pep(13) -> PEP
+            http(14) -> HTTP
+            ftp(15) -> FTP
+            dns(16) -> DNS
+            chIdStrict(17) -> CHID_STRICT
+            nlid(18) -> NLID
+            snmpMisc(19) -> SNMPMISC
+
+        The support of specific options mandates the support of
+        specific objects and access levels."
+    REFERENCE
+       "SatLabs System Recommendations, available at
+       www.satlabs.org."
+    SYNTAX BITS     {
+            mpegTrf(0),
+            coarseSync(1),
+            wideHop(2),
+            fastHop(3),
+            dynamicMfTdma(4),
+            contentionSync(5),
+            qpskLow(6),
+            mod16Apsk(7),
+            mod32Apsk(8),
+            normalFec(9),
+            multiTs(10),
+            gsTs(11),
+            enhQoS(12),
+            pep(13),
+            http(14),
+            ftp(15),
+            dns(16),
+            chIdStrict(17),
+            nlid(18),
+            snmpMisc(19),
+            spare1(20),
+            spare2(21),
+            spare3(22),
+            spare4(23),
+            spare5(24),
+            spare6(25),
+            spare7(26),
+            spare8(27),
+            spare9(28),
+            spare10(29),
+            spare11(30),
+            spare12(31)
+            }
+
+DvbRcsSatLabsFeatureMap ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+           "This textual convention enumerates the declaration
+           of the SatLabs-specified compatibility and
+           configuration features.  A value of 1 indicates that
+           the respective feature is supported.  The mapping to
+           the features is to be understood as described here.
+           (0) refers to the most significant bit.
+
+               rcstPara(0) -> RCST_PARA feature
+               installLog(1) -> INSTALL_LOG feature
+               enhClassifier(2) -> ENHCLASSIFIER feature
+               routeId(3) -> ROUTE_ID feature
+               oduList(4) -> ODULIST feature
+               extNetwork(5) -> EXTNETWORK feature
+               extControl(6) -> EXTCONTROL feature
+               extConfig(7) -> EXTCONFIG feature
+               extStatus(8) -> EXTSTATUS feature
+               mpaf(9) -> MPAF feature
+
+        The support of specific features mandates the support of
+        specific objects and access levels."
+       REFERENCE
+          "SatLabs System Recommendations, available at
+           www.satlabs.org."
+       SYNTAX BITS     {
+               rcstPara(0),
+               installLog(1),
+               enhClassifier(2),
+               routeId(3),
+               oduList(4),
+               extNetwork(5),
+               extControl(6),
+               extConfig(7),
+               extStatus(8),
+               mpaf(9),
+               spare1(10),
+               spare2(11),
+               spare3(12),
+               spare4(13),
+               spare5(14),
+               spare6(15),
+               spare7(16),
+               spare8(17),
+               spare9(18),
+               spare10(19),
+               spare11(20),
+               spare12(21),
+               spare13(22),
+               spare14(23),
+               spare15(24),
+               spare16(25),
+               spare17(26),
+               spare18(27),
+               spare19(28),
+               spare20(29),
+               spare21(30),
+               spare22(31)
+               }
+
+--==============================================================
+-- object type definitions
+--==============================================================
+dvbRcsMibObjects      OBJECT IDENTIFIER ::= {dvbRcsMib 1}
+dvbRcsConformance     OBJECT IDENTIFIER ::= {dvbRcsMib 2}
+
+dvbRcsRcst        OBJECT IDENTIFIER ::= {dvbRcsMibObjects 1}
+dvbRcsFwdLink     OBJECT IDENTIFIER ::= {dvbRcsMibObjects 2}
+dvbRcsRtnLink     OBJECT IDENTIFIER ::= {dvbRcsMibObjects 3}
+
+dvbRcsRcstSystem        OBJECT IDENTIFIER ::= {dvbRcsRcst 1}
+dvbRcsRcstNetwork       OBJECT IDENTIFIER ::= {dvbRcsRcst 2}
+dvbRcsRcstInstall       OBJECT IDENTIFIER ::= {dvbRcsRcst 3}
+dvbRcsRcstQos           OBJECT IDENTIFIER ::= {dvbRcsRcst 4}
+dvbRcsRcstControl       OBJECT IDENTIFIER ::= {dvbRcsRcst 5}
+dvbRcsRcstState         OBJECT IDENTIFIER ::= {dvbRcsRcst 6}
+
+dvbRcsFwdConfig         OBJECT IDENTIFIER ::= {dvbRcsFwdLink 1}
+dvbRcsFwdStatus         OBJECT IDENTIFIER ::= {dvbRcsFwdLink 2}
+
+dvbRcsRtnConfig         OBJECT IDENTIFIER ::= {dvbRcsRtnLink 1}
+dvbRcsRtnStatus         OBJECT IDENTIFIER ::= {dvbRcsRtnLink 2}
+
+--==============================================================
+--    dvbRcsRcstSystem sub-tree object types
+--==============================================================
+dvbRcsSystemMibRevision        OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "This object allows the SNMP agent to report the
+        implemented MIB module revision.
+        The supported REVISION of this module is reported."
+::= {dvbRcsRcstSystem 1}
+
+--==============================================================
+-- Options declared according to the textual conventions
+--==============================================================
+dvbRcsSystemSatLabsProfilesDeclaration OBJECT-TYPE
+    SYNTAX        DvbRcsSatLabsProfileMap
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the SatLabs profiles supported, as defined in
+        the SatLabs System Recommendations."
+::= {dvbRcsRcstSystem 2}
+
+dvbRcsSystemSatLabsOptionsDeclaration OBJECT-TYPE
+    SYNTAX        DvbRcsSatLabsOptionMap
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the SatLabs options supported, as defined in
+        the SatLabs System Recommendations."
+::= {dvbRcsRcstSystem 3}
+
+dvbRcsSystemSatLabsFeaturesDeclaration OBJECT-TYPE
+    SYNTAX        DvbRcsSatLabsFeatureMap
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates the optional compatibility features and minor
+         options supported, as defined in the SatLabs System
+         Recommendations."
+::= {dvbRcsRcstSystem 4}
+
+dvbRcsSystemLocation OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Physical location of the ODU antenna expressed as
+         longitude, latitude, and altitude.  The string
+         shall have 31 characters in the following format:
+             <xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M
+         where x, y and z represents digits,
+             a=N or S,
+             b=E or W,
+         Reading the digits from left to right:
+             'x' 7 latitude digits;
+              x digits 1-2 contain the degrees,
+              x digits 3-7 contain the minutes in decimal;
+             'y' 8 longitude digits;
+
+              y digits 1-3 contain the degrees,
+              y digits 4-8 contain the minutes in decimal;
+             'z' 5 altitude digits;
+                 meters above sea level in decimal;
+             '.' is the decimal point;
+             ',' is the field separator;
+             'M' is the indicator for altitude meters.
+         This format is a modified subset of the NMEA 0183
+         (National Marine Electronics Association, Interface
+         Standard) format for Global Positioning System Fix
+         Data.
+         This location and the satellite position are used to
+         calculate the RCST-satellite path delay.
+         Note: The system.sysLocation object of MIB-II provides
+         physical location of the IDU unit."
+::= {dvbRcsRcstSystem 5}
+
+dvbRcsSystemOduAntennaSize OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "cm"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Diameter of the antenna."
+::= {dvbRcsRcstSystem 6}
+
+dvbRcsSystemOduAntennaGain OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x0.1 dBi"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Antenna peak gain of the ODU."
+::= {dvbRcsRcstSystem 7}
+
+dvbRcsSystemOduSspa OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x0.1 W"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Power level of the Solid State Power Amplifier
+        installed in the ODU."
+::= {dvbRcsRcstSystem 8}
+
+dvbRcsSystemOduTxType OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Type of transmitter installed in the ODU."
+::= {dvbRcsRcstSystem 9}
+
+dvbRcsSystemOduRxType OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+         "Type of LNB installed in the ODU, with
+         information such as vendor type, output type (single,
+         twin, quad,...), etc."
+::= {dvbRcsRcstSystem 10}
+
+dvbRcsSystemOduRxBand OBJECT-TYPE
+    SYNTAX              INTEGER   {
+                        oduHighRxBand (0),
+                        oduLowRxBand  (1)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "LNB High Band / Low Band selector.  High Band corresponds
+        to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in
+        the Rx IFL cable:
+        (0)    - High Band
+        (1)    - Low Band"
+::= {dvbRcsRcstSystem 11}
+
+dvbRcsSystemOduRxLO OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 Hz"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Frequency of LNB Local Oscillator (in 100 Hz)"
+::= {dvbRcsRcstSystem 12}
+
+dvbRcsSystemOduTxLO OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 Hz"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Frequency of Block Up-Converter Local Oscillator
+        (in 100 Hz)."
+::= {dvbRcsRcstSystem 13}
+
+dvbRcsSystemIduPep OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 14}
+
+dvbRcsTcpPep OBJECT-TYPE
+    SYNTAX             INTEGER{
+                          disabled (0),
+                          enabled (1)
+                              }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Status and control of embedded TCP PEP.
+            0 - disabled or not implemented
+            1 - enabled"
+::={dvbRcsSystemIduPep 1}
+
+dvbRcsHttpPep  OBJECT-TYPE
+    SYNTAX              INTEGER{
+                           disabled (0),
+                           enabled (1)
+                               }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Status and control of embedded HTTP PEP.
+            0 - disabled or not implemented
+            1 - enabled"
+::={dvbRcsSystemIduPep 2}
+
+--==============================================================
+-- ODU structural entities
+--==============================================================
+
+dvbRcsOduTx         OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 15}
+dvbRcsOduRx         OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 16}
+dvbRcsOduAntenna    OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 17}
+
+--==============================================================
+-- ODU BUC
+--==============================================================
+
+dvbRcsOduTxTypeTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF DvbRcsOduTxTypeEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This table contains the identification of each well-
+        known BUC type supported by the IDU and provides its
+        associated index."
+::={dvbRcsOduTx 1}
+
+dvbRcsOduTxTypeEntry OBJECT-TYPE
+    SYNTAX            DvbRcsOduTxTypeEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the BUC type table."
+       INDEX   { dvbRcsOduTxTypeIndex }
+::={dvbRcsOduTxTypeTable 1}
+
+DvbRcsOduTxTypeEntry ::= SEQUENCE {
+                  dvbRcsOduTxTypeIndex          Unsigned32,
+                  dvbRcsOduTxTypeDescription    SnmpAdminString
+                  }
+
+dvbRcsOduTxTypeIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..32)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index for the BUC type."
+::={dvbRcsOduTxTypeEntry 1}
+
+dvbRcsOduTxTypeDescription OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Text-based identification of a BUC type."
+::={dvbRcsOduTxTypeEntry 2}
+
+dvbRcsOduTxType OBJECT-TYPE
+    SYNTAX              Unsigned32
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Index of the selected BUC type."
+::={dvbRcsOduTx 2}
+
+--==============================================================
+-- ODU LNB
+--==============================================================
+
+dvbRcsOduRxTypeTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF DvbRcsOduRxTypeEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This table contains the identification of each well-
+        known LNB type supported by the IDU and provides its
+        associated index."
+::={dvbRcsOduRx 1}
+
+dvbRcsOduRxTypeEntry OBJECT-TYPE
+    SYNTAX            DvbRcsOduRxTypeEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the LNB type table."
+    INDEX   { dvbRcsOduRxTypeIndex }
+ ::={dvbRcsOduRxTypeTable 1}
+
+DvbRcsOduRxTypeEntry ::= SEQUENCE {
+                  dvbRcsOduRxTypeIndex           Unsigned32,
+                  dvbRcsOduRxTypeDescription     SnmpAdminString
+                  }
+
+dvbRcsOduRxTypeIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..32)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index for the LNB type."
+::={dvbRcsOduRxTypeEntry 1}
+
+dvbRcsOduRxTypeDescription OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Text-based identification of an LNB type."
+::={dvbRcsOduRxTypeEntry 2}
+
+dvbRcsOduRxType OBJECT-TYPE
+    SYNTAX              Unsigned32
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Index of the selected LNB type."
+::={dvbRcsOduRx 2}
+
+--==============================================================
+-- ODU Antenna
+--==============================================================
+
+dvbRcsOduAntennaTypeTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF DvbRcsOduAntennaTypeEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This table contains the identification of each well-
+        known antenna type supported by the IDU and provides
+        its associated index."
+::={dvbRcsOduAntenna 1}
+
+dvbRcsOduAntennaTypeEntry OBJECT-TYPE
+    SYNTAX            DvbRcsOduAntennaTypeEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the antenna type table."
+    INDEX   { dvbRcsOduAntennaTypeIndex }
+::={dvbRcsOduAntennaTypeTable 1}
+
+DvbRcsOduAntennaTypeEntry ::= SEQUENCE {
+              dvbRcsOduAntennaTypeIndex          Unsigned32,
+              dvbRcsOduAntennaTypeDescription    SnmpAdminString
+              }
+
+dvbRcsOduAntennaTypeIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..32)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index for the antenna type."
+::={dvbRcsOduAntennaTypeEntry 1}
+
+dvbRcsOduAntennaTypeDescription OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Text-based identification of an antenna type."
+::={dvbRcsOduAntennaTypeEntry 2}
+
+dvbRcsOduAntennaType OBJECT-TYPE
+    SYNTAX              Unsigned32
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Index of the selected antenna type."
+::={dvbRcsOduAntenna 2}
+
+--==============================================================
+-- dvbRcsRcstNetwork sub-tree object types
+--==============================================================
+
+dvbRcsNetworkOamInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsNetworkOamInetAddress.
+        If the terminal OAM Internet address is unassigned or
+        unknown, then the value of this object is unknown(0)."
+::= {dvbRcsRcstNetwork 1}
+
+dvbRcsNetworkOamInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "OAM IP Address of the RCST.  This object is used with
+        both IP and interfaces MIB-II subgroups.  It uniquely
+        determines the interface through which OAM traffic
+        passes.
+        The OAM IP address may be statically or dynamically
+        assigned.  It is system dependent whether the OAM IP
+        address and the Traffic IP address are the same address.
+        If the terminal has no OAM Internet address assigned or if
+        this Internet address is unknown, the value of this
+        object is the zero-length OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsNetworkOamInetAddressType object."
+::= {dvbRcsRcstNetwork 2}
+
+dvbRcsNetworkOamInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Prefix length for the OAM IP Address.  If this address
+        prefix is unknown or does not apply, the value is zero."
+::= {dvbRcsRcstNetwork 3}
+
+dvbRcsNetworkOamInetAddressAssign OBJECT-TYPE
+    SYNTAX             INTEGER    {
+                oamInetAddressStatic    (1),
+                oamInetAddressDynamic   (2)
+    }
+    MAX-ACCESS         read-write
+    STATUS             current
+    DESCRIPTION
+        "Identifies whether the OAM IP address is statically
+        (1) or dynamically (2) assigned."
+::= {dvbRcsRcstNetwork 4}
+
+dvbRcsNetworkLanInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of dvbRcsNetworkLanInetAddress.
+        If the terminal Internet address on the LAN interface is
+        unassigned or unknown, then the value of this object is
+        unknown(0)."
+::= {dvbRcsRcstNetwork 5}
+
+dvbRcsNetworkLanInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "IP address of the LAN interface of the terminal.  If the
+        terminal has no Internet address assigned on the LAN
+        interface or if this Internet address is unknown, the
+        value of this object is the zero-length OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsNetworkLanInetAddressType object."
+::= {dvbRcsRcstNetwork 6}
+
+dvbRcsNetworkLanInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Prefix length for the LAN IP Address of the terminal.
+        If this address prefix is unknown or does not apply, the
+        value is zero."
+::= {dvbRcsRcstNetwork 7}
+
+dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType
+OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress.
+        If the default gateway Internet address is unassigned or
+        unknown, then the value of this object is unknown(0)."
+::= {dvbRcsRcstNetwork 8}
+
+dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "IP address of the default gateway for the air
+        interface.  If the terminal has no default gateway
+        assigned on the air interface or if this Internet address
+        is unknown, the value of this object is the zero-length
+        OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType
+        object."
+::= {dvbRcsRcstNetwork 9}
+
+dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength
+OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Prefix length for the IP address of the default gateway
+        for the air interface.
+        If this address prefix is unknown or does not apply, the
+        value is zero."
+::= {dvbRcsRcstNetwork 10}
+
+dvbRcsNetworkDnsServers OBJECT IDENTIFIER ::= {dvbRcsRcstNetwork
+11}
+
+dvbRcsPrimaryDnsServerInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsPrimaryDnsServerInetAddress.  If the primary DNS
+        server Internet address is unassigned or unknown, then
+        the value of this object is unknown(0)."
+::= { dvbRcsNetworkDnsServers 1}
+
+dvbRcsPrimaryDnsServerInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "IP address of the primary DNS server in the NCC.  If
+        the terminal has no primary DNS server assigned or if this
+        Internet address is unknown, the value of this object is
+        the zero-length OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsPrimaryDnsServerInetAddressType object."
+::= {dvbRcsNetworkDnsServers 2}
+
+dvbRcsPrimaryDnsServerInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Prefix length for the IP address of the primary DNS
+        server in the NCC.
+        If this address prefix is unknown or does not apply, the
+        value is zero."
+::= { dvbRcsNetworkDnsServers 3}
+
+dvbRcsSecondaryDnsServerInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsSecondaryDnsServerInetAddress.  If the secondary
+        DNS server Internet address is unassigned or unknown,
+        then the value of this object is unknown(0)."
+::= { dvbRcsNetworkDnsServers 4}
+
+dvbRcsSecondaryDnsServerInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "IP address of the secondary DNS server in the NCC.  If
+        the terminal has no secondary DNS server assigned or if
+        this Internet address is unknown, the value of this
+        object is the zero-length OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsSecondaryDnsServerInetAddressType object."
+::= {dvbRcsNetworkDnsServers 5}
+
+dvbRcsSecondaryDnsServerInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Prefix length for the IP address of the secondary DNS
+        server in the NCC.
+        If this address prefix is unknown or does not apply, the
+        value is zero."
+::= { dvbRcsNetworkDnsServers 6}
+
+dvbRcsNetworkNccMgtInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsNetworkNccMgtInetAddress.  If the management server
+        Internet address is unassigned or unknown, then the
+        value of this object is unknown(0)."
+::= {dvbRcsRcstNetwork 12}
+
+dvbRcsNetworkNccMgtInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "IP address of the management server in the NCC.  If
+        the terminal has no management server assigned or if this
+        Internet address is unknown, the value of this object is
+        the zero-length OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsNetworkNccMgtInetAddressType object."
+::= {dvbRcsRcstNetwork 13}
+
+dvbRcsNetworkNccMgtInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Prefix length for the IP address of the management
+        server in the NCC.
+        If this address prefix is unknown or does not apply, the
+        value is zero."
+::= { dvbRcsRcstNetwork 14}
+
+dvbRcsNetworkConfigFileDownloadUrl OBJECT-TYPE
+    SYNTAX              Uri (SIZE(0..65535))
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Full path name for the configuration file download.
+        It includes the protocol type (TFTP or FTP) and the
+        associated server IP address or hostname.  Hostname can
+        only be used if DNS is supported by the RCST.
+        The format of this parameter follows RFC 3986."
+::= {dvbRcsRcstNetwork 15}
+
+dvbRcsNetworkInstallLogFileDownloadUrl OBJECT-TYPE
+    SYNTAX              Uri (SIZE(0..65535))
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Full path of the installation log file to download.
+        It includes the protocol type (TFTP or FTP) and the
+        associated server IP address or hostname.  Hostname can
+        only be used if DNS is supported by the RCST.  The
+        installation log file can be created on the installer's
+        computer and downloaded to the RCST.
+        The format of this parameter follows RFC 3986."
+::= {dvbRcsRcstNetwork 16}
+
+dvbRcsNetworkConfigFileUploadUrl OBJECT-TYPE
+    SYNTAX              Uri(SIZE(0..65535))
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Full path name for the configuration file upload.
+        It includes the protocol type (TFTP or FTP) and the
+        associated server IP address or hostname.  Hostname can
+        only be used if DNS is supported by the RCST.
+        The format of this parameter follows RFC 3986."
+::= {dvbRcsRcstNetwork 17}
+
+dvbRcsNetworkLogFileUploadUrl OBJECT-TYPE
+    SYNTAX              Uri(SIZE(0..65535))
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Full path of the event log file.  It includes the
+        protocol type (TFTP or FTP) and the associated server IP
+        address or hostname.  Hostname can only be used if DNS is
+        supported by the RCST.
+        The format of this parameter follows RFC 3986."
+::= {dvbRcsRcstNetwork 18}
+
+dvbRcsNetworkInstallLogFileUploadUrl OBJECT-TYPE
+    SYNTAX              Uri(SIZE(0..65535))
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Full path of the installation log file.  It includes the
+        protocol type (TFTP or FTP) and the associated server
+        IP address or hostname.  Hostname can only be used if DNS
+        is supported by the RCST.  The installation log file can
+        be retrieved from the RCST by the NCC or by the
+        installer via the LAN.
+        The format of this parameter follows RFC 3986."
+::= {dvbRcsRcstNetwork 19}
+
+--==============================================================
+--    dvbRcsRcstInstall sub-tree object types
+--==============================================================
+dvbRcsInstallAntennaAlignmentState OBJECT-TYPE
+    SYNTAX              INTEGER {
+                antennaAlignmentStart   (1),
+                antennaAlignmentDeny    (2),
+                antennaAlignmentContinue(3),
+                antennaAlignmentStop    (4),
+                antennaAlignmentSuccess (5),
+                antennaAlignmentFail    (6)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Indicates the alignment state of the antenna:
+            (1)-Start;
+            (2)-Deny;
+            (3)-Continue;
+            (4)-Stop;
+            (5)-Success;
+            (6)-Fail"
+::= {dvbRcsRcstInstall 1}
+
+dvbRcsInstallCwFrequency OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 Hz"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Frequency of the transmitted Continuous Wave
+        carrier (in 100 Hz).
+        Minimum required precision is 1 kHz."
+::= {dvbRcsRcstInstall 2}
+
+dvbRcsInstallCwMaxDuration OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "seconds"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Time after which the Continuous Wave carrier must be
+        put down (in seconds)."
+::= {dvbRcsRcstInstall 3}
+
+dvbRcsInstallCwPower OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "x0.1 dBm"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "IDU TX output level when the IDU is configured to send
+        CW.  The resolution is 0.1 dBm and the accuracy is +/- 1
+        dBm.  Reconfiguration is applied immediately to a CW."
+::= {dvbRcsRcstInstall 4}
+
+dvbRcsInstallCoPolReading OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x0.1 dB"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Co-polarization measured value during installation
+        procedure (in 0.1 dB)."
+::= {dvbRcsRcstInstall 5}
+
+dvbRcsInstallXPolReading OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x0.1 dB"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Cross-polarization measured value during installation
+        procedure (in 0.1 dB)."
+::= {dvbRcsRcstInstall 6}
+
+dvbRcsInstallCoPolTarget OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x0.1 dB"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Co-polarization target value during installation
+        procedure (in 0.1 dB)."
+::= {dvbRcsRcstInstall 7}
+
+dvbRcsInstallXPolTarget OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x0.1 dB"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Cross-polarization target value during installation
+        procedure (in 0.1 dB)."
+ ::= {dvbRcsRcstInstall 8}
+
+dvbRcsInstallStandByDuration OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "seconds"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Time to wait in stand-by mode (in seconds)."
+::= {dvbRcsRcstInstall 9}
+
+dvbRcsInstallTargetEsN0 OBJECT-TYPE
+    SYNTAX              Unsigned32(0..315)
+    UNITS               "x0.1 dB"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This value describes the wanted Es/N0 value that
+        enables operation of the return link with the required
+        error performance.  The values shall be given in tenth of
+        dB and the initial value shall be equal to 7 dB.  The
+        range shall be from 0 dB to 31.5 dB, with a precision
+        of 0.1 dB."
+    DEFVAL        { 70 }
+::= {dvbRcsRcstInstall 10}
+
+--==============================================================
+-- dvbRcsRcstQos sub-tree object types
+--==============================================================
+dvbRcsPktClassTable OBJECT-TYPE
+    SYNTAX              SEQUENCE OF DvbRcsPktClassEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "This table describes the packet classification used in
+        the DVB-RCS terminal.  The number of entries is specified
+        by dvbRcsPktClassIndex. "
+::={dvbRcsRcstQos 1}
+
+dvbRcsPktClassEntry OBJECT-TYPE
+    SYNTAX            DvbRcsPktClassEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the packet classification table.  One object
+        type of each entry may have a value in the active range
+        (a non-default value).  The other object types are then
+        assumed to be set to 'inactive'.  The entry with the lowest
+        index value takes precedence when classifying a packet."
+    INDEX   { dvbRcsPktClassIndex }
+::= {dvbRcsPktClassTable 1}
+
+DvbRcsPktClassEntry ::= SEQUENCE {
+            dvbRcsPktClassIndex                 Unsigned32,
+            dvbRcsPktClassDscpLow               Dscp,
+            dvbRcsPktClassDscpHigh              Dscp,
+            dvbRcsPktClassDscpMarkValue         DscpOrAny,
+            dvbRcsPktClassIpProtocol            Unsigned32,
+            dvbRcsPktClassSrcInetAddressType    InetAddressType,
+            dvbRcsPktClassSrcInetAddress        InetAddress,
+            dvbRcsPktClassSrcInetAddressPrefixLength
+                                        InetAddressPrefixLength,
+            dvbRcsPktClassDstInetAddressType    InetAddressType,
+            dvbRcsPktClassDstInetAddress        InetAddress,
+            dvbRcsPktClassDstInetAddressPrefixLength
+                                        InetAddressPrefixLength,
+            dvbRcsPktClassSrcPortLow            InetPortNumber,
+            dvbRcsPktClassSrcPortHigh           InetPortNumber,
+            dvbRcsPktClassDstPortLow            InetPortNumber,
+            dvbRcsPktClassDstPortHigh           InetPortNumber,
+            dvbRcsPktClassVlanUserPri           Integer32,
+            dvbRcsPktClassPhbAssociation        Unsigned32,
+            dvbRcsPktClassRowStatus             RowStatus
+        }
+
+dvbRcsPktClassIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..64)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index automatically incremented by one at row
+        creation."
+::={dvbRcsPktClassEntry 1}
+
+dvbRcsPktClassDscpLow OBJECT-TYPE
+    SYNTAX              Dscp
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the low value of a range of
+        Diffserv Code Point (DSCP) values to which a packet is
+        compared."
+    DEFVAL { 0 }
+::={dvbRcsPktClassEntry 2}
+
+dvbRcsPktClassDscpHigh OBJECT-TYPE
+    SYNTAX              Dscp
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the high value of a range of
+        Diffserv Code Point (DSCP) values to which a packet is
+        compared."
+    DEFVAL { 63 }
+::={dvbRcsPktClassEntry 3}
+
+dvbRcsPktClassDscpMarkValue OBJECT-TYPE
+    SYNTAX              DscpOrAny
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object is the Diffserv Code Point (DSCP) value
+        used to mark the packet; -1 indicates no DSCP marking.
+        Possible DSCP marks values are (0..63)"
+    DEFVAL { -1 }
+::={dvbRcsPktClassEntry 4}
+
+dvbRcsPktClassIpProtocol OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..255)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the IP protocol to which a
+        packet is compared.  A value of 255 means match all."
+    DEFVAL { 255 }
+::={dvbRcsPktClassEntry 5}
+
+dvbRcsPktClassSrcInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsPktClassSrcInetAddress.  If the packet class source
+        Internet address is unassigned or unknown, then the
+        value of this object is unknown(0)."
+::= { dvbRcsPktClassEntry 6}
+
+dvbRcsPktClassSrcInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the IP source address to which a
+        packet is compared.  If the packet class has no source
+        Internet address assigned or if this Internet address is
+        unknown, the value of this object is the zero-length
+        OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsPktClassSrcInetAddressType object."
+::={dvbRcsPktClassEntry 7}
+
+dvbRcsPktClassSrcInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Prefix length of the IP source address that will be
+        matched for this packet class.  A value of zero indicates
+        that the selectivity is inactive."
+    DEFVAL { 0 }
+::={dvbRcsPktClassEntry 8}
+
+dvbRcsPktClassDstInetAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of
+        dvbRcsPktClassDstInetAddress.  If the packet class
+        destination Internet address is unassigned or unknown,
+        then the value of this object is unknown(0)."
+::= { dvbRcsPktClassEntry 9}
+
+dvbRcsPktClassDstInetAddress OBJECT-TYPE
+    SYNTAX              InetAddress
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the IP destination address to
+        which a packet is compared.  If the packet class has no
+        destination Internet address assigned or if this Internet
+        address is unknown, the value of this object is the
+        zero-length OCTET STRING.
+        The InetAddressType is given by the
+        dvbRcsPktClassDstInetAddressType object."
+::={dvbRcsPktClassEntry 10}
+
+dvbRcsPktClassDstInetAddressPrefixLength OBJECT-TYPE
+    SYNTAX              InetAddressPrefixLength
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Prefix length of the IP source address that will be
+        matched for this packet class.  A value of zero indicates
+        that the selectivity is inactive."
+    DEFVAL { 0 }
+::={dvbRcsPktClassEntry 11}
+
+dvbRcsPktClassSrcPortLow OBJECT-TYPE
+    SYNTAX              InetPortNumber
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the low range of the source
+        port to which a packet is compared.  A value of 0
+        indicates that the selectivity is inactive."
+    DEFVAL { 0 }
+::={dvbRcsPktClassEntry 12}
+
+dvbRcsPktClassSrcPortHigh OBJECT-TYPE
+    SYNTAX              InetPortNumber
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the high range of the source port
+        to which a packet is compared.  A value of 0 indicates
+        that the selectivity is inactive."
+    DEFVAL { 65535 }
+::={dvbRcsPktClassEntry 13}
+
+dvbRcsPktClassDstPortLow OBJECT-TYPE
+    SYNTAX              InetPortNumber
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the low range of the destination
+        port to which a packet is compared.  A value of 0
+        indicates that the selectivity is inactive."
+    DEFVAL { 0 }
+::={dvbRcsPktClassEntry 14}
+
+dvbRcsPktClassDstPortHigh OBJECT-TYPE
+    SYNTAX              InetPortNumber
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object specifies the high range of the destination
+        port to which a packet is compared.  A value of 0
+        indicates that the selectivity is inactive."
+    DEFVAL { 65535 }
+::={dvbRcsPktClassEntry 15}
+
+dvbRcsPktClassVlanUserPri OBJECT-TYPE
+    SYNTAX              Integer32 (-1..7)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+      "This object specifies the VLAN User Priority to which a
+       packet is compared.  A value of -1 indicates that the
+       selectivity is inactive."
+    DEFVAL { -1 }
+::={dvbRcsPktClassEntry 16}
+
+dvbRcsPktClassPhbAssociation OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..65535)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Associate the filter entry to a specific PHB (refer to
+        dvbRcsPhbIdentifier)."
+::={dvbRcsPktClassEntry 17}
+
+dvbRcsPktClassRowStatus OBJECT-TYPE
+    SYNTAX              RowStatus
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable objects
+        in this row may be modified at any time."
+::={dvbRcsPktClassEntry 18}
+
+--==============================================================
+-- dvbRcsPhbMappingTable
+--==============================================================
+dvbRcsPhbMappingTable OBJECT-TYPE
+    SYNTAX              SEQUENCE OF DvbRcsPhbMappingEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "This table is a list of Per-Hop Behavior (PHB) MIB
+        entries.
+        It describes the PHB mapping to the Request Class."
+::={dvbRcsRcstQos 2}
+
+dvbRcsPhbMappingEntry OBJECT-TYPE
+    SYNTAX            DvbRcsPhbMappingEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the PHB mapping table."
+    INDEX   {dvbRcsPhbIdentifier}
+::= {dvbRcsPhbMappingTable 1}
+
+DvbRcsPhbMappingEntry ::= SEQUENCE {
+
+                dvbRcsPhbIdentifier               Unsigned32,
+                dvbRcsPhbName
+                                             SnmpAdminString,
+                dvbRcsPhbRequestClassAssociation  Unsigned32,
+                dvbRcsPhbMappingRowStatus          RowStatus
+                }
+
+dvbRcsPhbIdentifier OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..65535)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Identification of the Per-Hop Behavior (PHB).  It
+        follows the unsigned 16-bit binary encoding as specified
+        in RFC 3140.  The value 0 designates the Default PHB."
+::={dvbRcsPhbMappingEntry 1}
+
+dvbRcsPhbName OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "The name of the Per-Hop Behavior (PHB)."
+::={dvbRcsPhbMappingEntry 2}
+
+dvbRcsPhbRequestClassAssociation OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..16)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "This object is an association of this Per-Hop Behavior
+        (PHB) to a Request Class (by reference to a Request
+        Class index)."
+::={dvbRcsPhbMappingEntry 3}
+
+dvbRcsPhbMappingRowStatus OBJECT-TYPE
+    SYNTAX              RowStatus
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+        objects in this row may be modified at any time."
+    DEFVAL { active }
+::={dvbRcsPhbMappingEntry 4}
+
+--==============================================================
+--   dvbRcsRequestClassTable
+--==============================================================
+dvbRcsRequestClassTable OBJECT-TYPE
+    SYNTAX              SEQUENCE OF DvbRcsRequestClassEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "This table is a list of Request Class entries.  This
+        class describes the layer 2 QoS objects."
+::={dvbRcsRcstQos 3}
+
+dvbRcsRequestClassEntry OBJECT-TYPE
+    SYNTAX            DvbRcsRequestClassEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the Request Class table."
+    INDEX {dvbRcsRequestClassIndex}
+::= {dvbRcsRequestClassTable 1}
+
+DvbRcsRequestClassEntry ::= SEQUENCE {
+                dvbRcsRequestClassIndex              Unsigned32,
+                dvbRcsRequestClassName
+                                                SnmpAdminString,
+                dvbRcsRequestClassChanId             Unsigned32,
+                dvbRcsRequestClassVccVpi             Unsigned32,
+                dvbRcsRequestClassVccVci             Unsigned32,
+                dvbRcsRequestClassPidPoolReference   Unsigned32,
+                dvbRcsRequestClassCra                Unsigned32,
+                dvbRcsRequestClassRbdcMax            Unsigned32,
+                dvbRcsRequestClassRbdcTimeout        Unsigned32,
+                dvbRcsRequestClassVbdcMax            Unsigned32,
+                dvbRcsRequestClassVbdcTimeout        Unsigned32,
+                dvbRcsRequestClassVbdcMaxBackLog     Unsigned32,
+                dvbRcsRequestClassRowStatus          RowStatus
+                }
+
+dvbRcsRequestClassIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..16)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index of the Request Class table.  A total of 16 entries
+        are supported."
+::={dvbRcsRequestClassEntry 1}
+
+dvbRcsRequestClassName OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Name of the Request Class."
+::={dvbRcsRequestClassEntry 2}
+
+dvbRcsRequestClassChanId OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..15)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Channel ID of the Request Class."
+::={dvbRcsRequestClassEntry 3}
+
+dvbRcsRequestClassVccVpi OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..255)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Defines the VPI used for the Request Class (ATM profile)."
+ ::={dvbRcsRequestClassEntry 4}
+
+dvbRcsRequestClassVccVci OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..65535)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Defines the VCI used for the Request Class (ATM profile)."
+::={dvbRcsRequestClassEntry 5}
+
+dvbRcsRequestClassPidPoolReference OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..16)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Reference to the Packet IDentifier (PID) pool
+        applicable for the Request Class."
+::={dvbRcsRequestClassEntry 6}
+
+dvbRcsRequestClassCra OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "bit/s"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Defines the Continuous Rate Assignment (CRA) level for the
+        Request Class in bits per second (bit/s)."
+::={dvbRcsRequestClassEntry 7}
+
+dvbRcsRequestClassRbdcMax OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x2 kbit/s"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Maximum Rate-Based Dynamic Capacity (RBDC) that can be
+        requested for the Request Class, in number of 2 kbit/s."
+::={dvbRcsRequestClassEntry 8}
+
+dvbRcsRequestClassRbdcTimeout OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "superframes"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Persistence of the Rate-Based Dynamic Capacity (RBDC)
+        request, expressed in superframes."
+::={dvbRcsRequestClassEntry 9}
+
+dvbRcsRequestClassVbdcMax OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "ATM cells/MPEG packets"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Maximum Volume-Based Dynamic Capacity (VBDC) that can
+        be allocated to the Request Class, in payload units (one
+        ATM cell or one MPEG packet) per superframe."
+::={dvbRcsRequestClassEntry 10}
+
+dvbRcsRequestClassVbdcTimeout OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "superframes"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Time after which the RCST considers that the pending
+        requests are lost.  The RCST may issue new requests for
+        that traffic.  Volume-Based Dynamic Capacity (VBDC)
+        Timeout is expressed in superframes."
+::={dvbRcsRequestClassEntry 11}
+
+dvbRcsRequestClassVbdcMaxBackLog OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "bytes"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Volume-Based Dynamic Capacity (VBDC) back log per
+        Request Class (expressed in bytes)."
+::={dvbRcsRequestClassEntry 12}
+
+dvbRcsRequestClassRowStatus OBJECT-TYPE
+    SYNTAX              RowStatus
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "The status of this conceptual row.  It is not possible
+        to change values in a row of this table while the row is
+        active."
+::={dvbRcsRequestClassEntry 13}
+
+--==============================================================
+-- The table of PID pools
+--==============================================================
+
+dvbRcsPidPoolTable OBJECT-TYPE
+    SYNTAX              SEQUENCE OF DvbRcsPidPoolEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "This table contains the Packet IDentifier (PID) pools.
+        For the MPEG profile, several Request Classes may be mapped
+        within a pool of several PIDs to allow Section Packing
+        across several Request Classes.
+        A PID value may occur in more than one PID pool.  Each
+        PID value can effectively occur only once in each pool."
+::={dvbRcsRcstQos 4}
+
+dvbRcsPidPoolEntry OBJECT-TYPE
+    SYNTAX            DvbRcsPidPoolEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the PID pool table."
+    INDEX { dvbRcsPidPoolIndex, dvbRcsPidIndex }
+::= {dvbRcsPidPoolTable 1}
+
+DvbRcsPidPoolEntry ::= SEQUENCE {
+        dvbRcsPidPoolIndex            Unsigned32,
+        dvbRcsPidIndex                Unsigned32,
+        dvbRcsPidValue                Unsigned32,
+        dvbRcsPidPoolRowStatus        RowStatus
+
+        }
+
+dvbRcsPidPoolIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..16)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index of the PID pool in the PID pool table."
+::={dvbRcsPidPoolEntry 1}
+
+dvbRcsPidIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..16)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index of the PID entry within the PID pool."
+::={dvbRcsPidPoolEntry 2}
+
+dvbRcsPidValue OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..8191)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Defines one of the PIDs to be used in a PID pool of
+        dvbRcsPidPoolIndex.
+        A PID value may occur in more than one PID pool.  Each
+        PID value can effectively occur only once in each pool."
+::={dvbRcsPidPoolEntry 3}
+
+dvbRcsPidPoolRowStatus OBJECT-TYPE
+    SYNTAX              RowStatus
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+        objects in this row may be modified at any time."
+    DEFVAL { active }
+::={dvbRcsPidPoolEntry 4}
+
+dvbRcsQosGlobalRbdcMax OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x2 kbit/s"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Global maximum RBDC that can be requested for the RCST,
+        in number of 2 kbit/s."
+::={dvbRcsRcstQos 5}
+
+dvbRcsQosGlobalVbdcMax OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "ATM cells/MPEG packets"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Global maximum VBDC that can be allocated to the RCST,
+        in payload units (one ATM cell or one MPEG packet) per
+        superframe."
+::={dvbRcsRcstQos 6}
+
+dvbRcsQosGlobalVbdcMaxBackLog OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "bytes"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Global VBDC back log at the RCST level (expressed in
+        bytes).  It is used only if the VBDC back log is not
+        configured in the Request Class (expressed in bytes)."
+::={dvbRcsRcstQos 7}
+
+dvbRcsQosChannelIdStrictDispatching OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                notStrict (0),
+                                strict    (1)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Indicates whether the RCST will strictly follow RC
+        association when signaled through Channel_ID in the
+        TBTP:
+            (0)- no strict association
+            (1)- strict association"
+::={dvbRcsRcstQos 8}
+
+--==============================================================
+-- dvbRcsRcstControl sub-tree object types
+--==============================================================
+dvbRcsCtrlRebootCommand OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle        (1),
+                                normal      (2),
+                                alternate   (3)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable shall force the RCST to reboot:
+            (1)- idle
+            (2)- normal reboot (from current software load)
+            (3)- reboot from alternate load (swap to alternate
+                 load before reboot)"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 1}
+
+dvbRcsCtrlRcstTxDisable OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle        (1),
+                                disable     (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable shall force the RCST to stop transmission
+        (transmit disabled as defined in SatLabs System
+         Recommendations):
+            (1)- idle
+            (2)- initiate Tx Disabled"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 2}
+
+dvbRcsCtrlUserTrafficDisable OBJECT-TYPE
+    SYNTAX           INTEGER {
+                             idle        (1),
+                             disable     (2)
+    }
+    MAX-ACCESS       read-write
+    STATUS           current
+    DESCRIPTION
+        "This variable shall disable user traffic (only RCST
+        management traffic can be transmitted):
+            (1)- idle
+            (2)- disable user traffic"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 3}
+
+dvbRcsCtrlCwEnable OBJECT-TYPE
+    SYNTAX           INTEGER {
+                             off    (1),
+                             on     (2)
+    }
+    MAX-ACCESS       read-write
+    STATUS           current
+    DESCRIPTION
+        "This variable will force the RCST to start transmission
+        of CW, if the RCST is first set to the installation
+        state and is properly configured for CW transmission:
+           (1)- off
+           (2)- on"
+    DEFVAL {off}
+::={dvbRcsRcstControl 4}
+
+dvbRcsCtrlOduTxReferenceEnable OBJECT-TYPE
+    SYNTAX           INTEGER {
+                             off    (1),
+                             on     (2)
+    }
+    MAX-ACCESS       read-write
+    STATUS           current
+    DESCRIPTION
+        "Enables activation and deactivation of the 10 MHz reference
+         clock in the Tx IFL cable:
+            (1) off
+            (2) on"
+    DEFVAL {on}
+::={dvbRcsRcstControl 5}
+
+dvbRcsCtrlOduTxDCEnable OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                off    (1),
+                                on     (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Enables activation and deactivation of DC in the Tx IFL
+        cable:
+          (1) off
+          (2) on"
+    DEFVAL {on}
+::={dvbRcsRcstControl 6}
+
+dvbRcsCtrlOduRxDCEnable OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                off    (1),
+                                on     (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Enables activation and deactivation of DC in the Rx IFL
+        cable:
+
+          (1) off
+          (2) on"
+    DEFVAL {on}
+::={dvbRcsRcstControl 7}
+
+dvbRcsCtrlDownloadFileCommand OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle            (1),
+                                config          (2),
+                                installationLog (3)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable will initiate an RCST configuration file
+        download process:
+        (1) idle
+        (2) download RCST configuration file from TFTP/FTP
+            server
+        (3) download RCST installation log file from TFTP/FTP
+            server (INSTALL_LOG feature)"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 8}
+
+dvbRcsCtrlUploadFileCommand OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle              (1),
+                                config            (2),
+                                eventAlarm        (3),
+                                installationLog   (4)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable will initiate an RCST upload process:
+        (1) idle
+        (2) upload RCST configuration file to TFTP/FTP server
+        (3) upload RCST event/alarm log file to TFTP/FTP server
+        (4) upload RCST installation log file to TFTP/FTP server
+            (INSTALL_LOG feature)"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 9}
+
+dvbRcsCtrlActivateConfigFileCommand OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle            (1),
+                                activate        (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Triggers the RCST to use the configuration file and
+        update its parameters accordingly.  Some RCST
+        implementations may require a reboot for the parameters
+        to take effect (vendor specific).
+        (1)    idle
+        (2)    activate"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 10}
+
+dvbRcsCtrlRcstLogonCommand OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle           (1),
+                                logon          (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable will initiate an RCST logon:
+           (1) idle
+           (2) initiate RCST logon"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 11}
+
+dvbRcsCtrlRcstLogoffCommand OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle      (1),
+                                logoff    (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable will initiate an RCST logoff:
+           (1) idle
+           (2) initiate RCST logoff"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 12}
+
+dvbRcsCtrlRcstRxReacquire OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                idle                    (1),
+                                reacquireForwardLink    (2)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "This variable will force the RCST to acquire the
+        forward link and start receiving:
+           (1) idle
+           (2) reacquire forward link"
+    DEFVAL {idle}
+::={dvbRcsRcstControl 13}
+
+--==============================================================
+-- dvbRcsRcstState sub-tree object types
+--==============================================================
+dvbRcsRcstMode OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                installation (0),
+                                operational  (1)
+    }
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+      "Identifies the current mode of the RCST and allows the RCST
+      to return to the installation mode when needed.  Values for
+      the RCST mode are:
+          Installation (0)
+          Operational (1)"
+::={dvbRcsRcstState 1}
+
+dvbRcsRcstFaultStatus OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                nofault (0),
+                                fault   (1)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Provides the fault status of the terminal.  The fault
+        status management is vendor specific.  Values for the
+        fault status are:
+            no fault (0)
+            fault (1)"
+::={dvbRcsRcstState 2}
+
+dvbRcsRcstFwdLinkStatus OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                notAcquired (0),
+                                acquired    (1)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Provides the status of the RCST forward link.  Values
+        for the forward link status are:
+          Not acquired (0)
+          Acquired (1)"
+::={dvbRcsRcstState 3}
+
+dvbRcsRcstRtnLinkStatus OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                loggedOff (0),
+                                loggedOn  (1)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Provides the status of the RCST return link.  Values for
+        the return link status are:
+            Logged-off (0)
+            Logged-on (1)"
+::={dvbRcsRcstState 4}
+
+dvbRcsRcstLogUpdated OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                noUpdate         (0),
+                                logfileUpdated   (1)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Indicates the existence of an updated event log file:
+            No update (0)
+            Event Log file updated (1)
+        The RCST should remove the 'Event Log file updated'
+        indication as the log file is fetched by the NCC."
+::={dvbRcsRcstState 5}
+
+dvbRcsRcstCurrentSoftwareVersion OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Current RCST software version."
+::={dvbRcsRcstState 6}
+
+dvbRcsRcstAlternateSoftwareVersion OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Alternate (backup/new) RCST software version."
+::={dvbRcsRcstState 7}
+
+dvbRcsRcstActivatedConfigFileVersion OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Version of the most recently activated configuration
+        file.
+        The version is vendor specific."
+::={dvbRcsRcstState 8}
+
+dvbRcsRcstDownloadedConfigFileVersion OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+      "Version of the most recently downloaded configuration
+       file.
+       Version is vendor specific.  If the value is different
+       from dvbRcsRcstActivatedConfigFileVersion, it is pending
+       for activation."
+::={dvbRcsRcstState 9}
+
+--==============================================================
+-- dvbRcsFwdConfig sub-tree object types
+--==============================================================
+dvbRcsFwdStartTable OBJECT-TYPE
+    SYNTAX              SEQUENCE OF DvbRcsFwdStartEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Lists forward link attachment points (e.g., different
+        for installation and operation).
+        The table describes the forward link parameters used for
+        the start-up stream with the NCC."
+::={dvbRcsFwdConfig 1}
+
+dvbRcsFwdStartEntry OBJECT-TYPE
+    SYNTAX            DvbRcsFwdStartEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the Forward Link Start Configuration table."
+    INDEX {dvbRcsFwdStartIndex}
+::= {dvbRcsFwdStartTable 1}
+
+DvbRcsFwdStartEntry ::= SEQUENCE {
+                    dvbRcsFwdStartIndex         Unsigned32,
+                    dvbRcsFwdStartPopId         Integer32,
+                    dvbRcsFwdStartFrequency     Unsigned32,
+                    dvbRcsFwdStartPolar         INTEGER,
+                    dvbRcsFwdStartFormat        INTEGER,
+                    dvbRcsFwdStartRolloff       INTEGER,
+                    dvbRcsFwdStartSymbolRate    Unsigned32,
+                    dvbRcsFwdStartInnerFec      INTEGER,
+                    dvbRcsFwdStartRowStatus     RowStatus
+}
+
+dvbRcsFwdStartIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..8)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index of the Forward Link StartConfig table."
+::={dvbRcsFwdStartEntry 1}
+
+dvbRcsFwdStartPopId OBJECT-TYPE
+    SYNTAX              Integer32 (-1..65535)
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Population identifier associated with the start-up
+         forward link:
+            -1: any (auto)
+            0-65535: specific StartPopId
+         If 'any' is set, the RCST will assume membership of any
+         announced population ID and will commence with logon in
+         accordance with this assumption."
+::={dvbRcsFwdStartEntry 2}
+
+dvbRcsFwdStartFrequency OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 kHz"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Frequency of the start transponder carrying a
+        Network Information Table to which any RCST shall
+        trigger to acquire forward link.  Its value shall be
+        given in multiples of 100 kHz."
+::={dvbRcsFwdStartEntry 3}
+
+dvbRcsFwdStartPolar OBJECT-TYPE
+    SYNTAX              INTEGER   {
+
+                                  linearHorizontal (0),
+                                  linearVertical   (1),
+                                  circularLeft     (2),
+                                  circularRight    (3)
+    }
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "2-bit field giving the polarization of the start
+        transponder carrying a Network Information Table to
+        which any RCST shall trigger to acquire forward link:
+            00: linear and horizontal
+            01: linear and vertical
+            10: circular left
+            11: circular right"
+::={dvbRcsFwdStartEntry 4}
+
+dvbRcsFwdStartFormat OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                auto     (-1),
+                                dvbs      (0),
+                                dvbs2ccm  (1),
+                                dvbs2acm  (2)
+    }
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Specifies the transmission format standard applied for
+        the startup stream.  The start transport stream carries a
+        Network Information Table that the RCST uses for
+        acquiring the forward link signaling.  Supported values
+        are:
+            -1: unspecified (automatic format acquisition is
+                assumed)
+             0: DVB-S (support of this value is mandatory if
+                DVB-S support is claimed)
+             1: DVB-S2 with CCM (support of this value is
+                mandatory if DVB-S2 CCM support is claimed)
+             2: DVB-S2 with VCM or ACM (support of this value is
+                mandatory if DVB-S2 ACM support is claimed)
+        This allows the RCST to discriminate between CCM and
+        VCM/ACM when selecting the forward link.
+        The support of automatic format selection is optional.
+        One or several of the other format selections must be
+        supported, according to the claimed SatLabs profile
+        support."
+::={dvbRcsFwdStartEntry 5}
+
+dvbRcsFwdStartRolloff OBJECT-TYPE
+    SYNTAX        INTEGER {
+                          autoRolloff    (0),
+                          rolloff020     (1),
+                          rolloff025     (2),
+                          rolloff035     (3)
+    }
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "Specifies the receive filter roll-off applied on the
+        start transponder.  The start transponder carries a
+        Network Information Table that the RCST uses for
+        acquiring the forward link signaling.
+        Supported values are:
+            0: any (auto)
+            1: 0.20
+            2: 0.25
+            3: 0.35"
+::={dvbRcsFwdStartEntry 6}
+
+dvbRcsFwdStartSymbolRate OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 symbols/s"
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Specifies the symbol rate on the start transponder
+        carrying a Network Information Table to which any RCST
+        shall trigger to acquire forward link.  Its value shall
+        be given in multiples of 100 symbols/s."
+::={dvbRcsFwdStartEntry 7}
+
+dvbRcsFwdStartInnerFec OBJECT-TYPE
+    SYNTAX              INTEGER     {
+                                    autoFec     (-1),
+                                    fecRate12    (0),
+                                    fecRate23    (1),
+                                    fecRate34    (2),
+                                    fecRate56    (3),
+                                    fecRate78    (4),
+                                    fecRate89    (5),
+                                    fecRate35    (6),
+                                    fecRate45    (7),
+                                    fecRate910   (8),
+                                    fecRate25    (9),
+                                    fecRate13   (10),
+                                    fecRate14   (11),
+                                    noInnerCode (12)
+    }
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "Specifies the inner Forward Error Correction used on
+        the start transponder carrying a Network Information
+        Table to which any RCST shall trigger to acquire forward
+        link.
+        Supported values are:
+                autoFec      (-1),
+                fecRate1/2    (0),
+                fecRate2/3    (1),
+                fecRate3/4    (2),
+                fecRate5/6    (3),
+                fecRate7/8    (4),
+                fecRate8/9    (5),
+                fecRate3/5    (6),
+                fecRate4/5    (7),
+                fecRate9/10   (8),
+                fecRate2/5    (9),
+                fecRate1/3    (10),
+                fecRate1/4    (11),
+                noInnerCode   (12)
+    The support of autoFec is optional."
+::={dvbRcsFwdStartEntry 8}
+
+dvbRcsFwdStartRowStatus OBJECT-TYPE
+    SYNTAX              RowStatus
+    MAX-ACCESS          read-create
+    STATUS              current
+    DESCRIPTION
+        "The status of this conceptual row.  It is not possible
+        to change values in a row of this table while the row is
+        active."
+::={dvbRcsFwdStartEntry 9}
+
+--==============================================================
+--  dvbRcsFwdStatus sub-tree object types
+--==============================================================
+dvbRcsFwdStatusPopId OBJECT-TYPE
+    SYNTAX              Unsigned32 (0..65535)
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Population identifier applied at log-on:
+            0-65535: specific StartPopId
+        If the RCST was allowed to logon with any population,
+        the RCST will report the base number of the announced
+        population ID indicated by the RCS Map Table linkage
+        descriptor used at logon."
+::={dvbRcsFwdStatus 1}
+
+dvbRcsFwdStatusTable OBJECT-TYPE
+    SYNTAX              SEQUENCE OF DvbRcsFwdStatusEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "This table describes the current status of Forward Link
+        interfaces."
+::={dvbRcsFwdStatus 2}
+
+dvbRcsFwdStatusEntry OBJECT-TYPE
+    SYNTAX            DvbRcsFwdStatusEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "An entry in the forward link status table.  Each entry
+        is associated with a physical interface.
+        An RCST shall support at least one entry."
+    INDEX { dvbRcsFwdStatusIndex }
+::= {dvbRcsFwdStatusTable 1}
+
+DvbRcsFwdStatusEntry ::= SEQUENCE {
+                dvbRcsFwdStatusIndex             Unsigned32,
+                dvbRcsFwdStatusIfReference       Unsigned32,
+                dvbRcsFwdStatusNetId             Unsigned32,
+                dvbRcsFwdStatusNetName
+                                            SnmpAdminString,
+                dvbRcsFwdStatusFormat            INTEGER,
+                dvbRcsFwdStatusFrequency         Unsigned32,
+                dvbRcsFwdStatusPolar             INTEGER,
+                dvbRcsFwdStatusInnerFec          INTEGER,
+                dvbRcsFwdStatusSymbolRate        Unsigned32,
+                dvbRcsFwdStatusRolloff           INTEGER,
+                dvbRcsFwdStatusModulation        INTEGER,
+                dvbRcsFwdStatusFecFrame          INTEGER,
+                dvbRcsFwdStatusPilot             INTEGER,
+                dvbRcsFwdStatusBer               Integer32,
+                dvbRcsFwdStatusCnr               Integer32,
+                dvbRcsFwdStatusRxPower           Integer32
+}
+
+dvbRcsFwdStatusIndex OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..8)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "Index of the forward link status table."
+::={dvbRcsFwdStatusEntry 1}
+
+dvbRcsFwdStatusIfReference OBJECT-TYPE
+    SYNTAX              Unsigned32 (1..8)
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Cross reference to the interface table."
+::={dvbRcsFwdStatusEntry 2}
+
+dvbRcsFwdStatusNetId OBJECT-TYPE
+    SYNTAX              Unsigned32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Interactive network identifier of the forward
+        link (from the RCS Map Table)."
+::={dvbRcsFwdStatusEntry 3}
+
+dvbRcsFwdStatusNetName OBJECT-TYPE
+    SYNTAX              SnmpAdminString
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The name of the interactive network of the forward
+        link (from the RCS Map Table)."
+::={dvbRcsFwdStatusEntry 4}
+
+dvbRcsFwdStatusFormat OBJECT-TYPE
+    SYNTAX              INTEGER  {
+                                 dvbs            (0),
+                                 dvbs2ccm        (1),
+                                 dvbs2acm        (2),
+                                 reservedFormat  (3)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Specifies the transmission format applied on the
+        forward link.  Supported values are (from RCS Map Table):
+            0: DVB-S
+            1: DVB-S2 using CCM
+            2: DVB-S2 using VCM or ACM
+            3: reserved"
+::={dvbRcsFwdStatusEntry 5}
+
+dvbRcsFwdStatusFrequency OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 kHz"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "An estimate of the frequency of the forward link.  Its
+        value shall be given in multiples of 100 kHz."
+::={dvbRcsFwdStatusEntry 6}
+
+dvbRcsFwdStatusPolar OBJECT-TYPE
+    SYNTAX              INTEGER   {
+                                  linearHorizontal (0),
+                                  linearVertical   (1),
+                                  circularLeft     (2),
+                                  circularRight    (3)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "2-bit field giving the polarization of the forward link
+        Supported values are (from RCS Map Table):
+            00: linear and horizontal
+            01: linear and vertical
+            10: circular left
+            11: circular right"
+::={dvbRcsFwdStatusEntry 7}
+
+dvbRcsFwdStatusInnerFec OBJECT-TYPE
+    SYNTAX              INTEGER     {
+                                    unknown     (-1),
+                                    fecRate12    (0),
+                                    fecRate23    (1),
+                                    fecRate34    (2),
+                                    fecRate56    (3),
+                                    fecRate78    (4),
+                                    fecRate89    (5),
+                                    fecRate35    (6),
+                                    fecRate45    (7),
+                                    fecRate910   (8),
+                                    fecRate25    (9),
+                                    fecRate13   (10),
+                                    fecRate14   (11),
+                                    noInnerCode (12)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Specifies the inner Forward Error Correction used on
+        the forward link for transmission to the RCST.
+        Supported values are:
+                unknown      (-1),
+                fecRate1/2    (0),
+                fecRate2/3    (1),
+                fecRate3/4    (2),
+                fecRate5/6    (3),
+                fecRate7/8    (4),
+                fecRate8/9    (5),
+                fecRate3/5    (6),
+                fecRate4/5    (7),
+                fecRate9/10   (8),
+                fecRate2/5    (9),
+                fecRate1/3    (10),
+                fecRate1/4    (11),
+                noInnerCode   (12)
+        The RCST will report a value that has been used for
+        transmission to the RCST within the most recent 60
+        seconds.  If this is not relevant, the RCST will report
+        'unknown'."
+::={dvbRcsFwdStatusEntry 8}
+
+dvbRcsFwdStatusSymbolRate OBJECT-TYPE
+    SYNTAX              Unsigned32
+    UNITS               "x100 symbols/s"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "An estimate of the symbol rate of the forward link.
+        Its value shall be given in multiples of 100 symbols/s."
+::={dvbRcsFwdStatusEntry 9}
+
+dvbRcsFwdStatusRolloff OBJECT-TYPE
+    SYNTAX              INTEGER   {
+                                  undefRolloff       (0),
+                                  rolloff020         (1),
+                                  rolloff025         (2),
+                                  rolloff035         (3)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "An estimate of the roll-off applied on the forward
+        link.
+        Supported values are:
+            0: undefined
+            1: 0.20
+
+            2: 0.25
+            3: 0.35"
+::={dvbRcsFwdStatusEntry 10}
+
+ dvbRcsFwdStatusModulation OBJECT-TYPE
+    SYNTAX              INTEGER   {
+                                  unknown        (0),
+                                  mBPSK          (1),
+                                  mQPSK          (2),
+                                  m8PSK          (3),
+                                  m16APSK        (4),
+                                  m32APSK        (5)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Indicates the modulation on the forward link used for
+        transmission to the RCST. Supported values are:
+            0: unknown
+            1: BPSK
+            2: QPSK
+            3: 8PSK
+            4: 16APSK
+            5: 32APSK
+        The RCST will report a value that has been used for
+        transmission to the RCST within the most recent 60
+        seconds.
+        If this is not relevant, the RCST will report
+        'unknown'."
+::={dvbRcsFwdStatusEntry 11}
+
+dvbRcsFwdStatusFecFrame OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                unknown       (0),
+                                shortframe    (1),
+                                longframe     (2)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Indicates the frame length used on the forward link for
+        transmission to the RCST.
+        Supported values are:
+            0: Unknown
+            1: Short frame
+            2: Normal frame
+        The RCST will report a value that has been used for
+        transmission to the RCST within the most recent 60
+
+        seconds.
+        If this is not relevant, the RCST will report
+        'unknown'."
+::={dvbRcsFwdStatusEntry 12}
+
+dvbRcsFwdStatusPilot OBJECT-TYPE
+    SYNTAX              INTEGER {
+                                unknown      (0),
+                                pilotNotused (1),
+                                pilotUsed    (2)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Indicates whether pilots are used on the forward link
+        for transmission to the RCST.
+        Supported values are:
+            0: Unknown
+            1: Pilots are not used
+            2: Pilots are used
+        The RCST will report a value that has been used for
+        transmission to the RCST within the most recent 60
+        seconds.
+        If this is not relevant, the RCST will report
+        'unknown'."
+::={dvbRcsFwdStatusEntry 13}
+
+dvbRcsFwdStatusBer OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "exponent of 10"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Provides the RCST BER on the Forward Link in log10
+        units."
+::={dvbRcsFwdStatusEntry 14}
+
+dvbRcsFwdStatusCnr OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "0.1 dB"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Provides the RCST CNR on the Forward Link in 0.1 dB
+        units."
+::={dvbRcsFwdStatusEntry 15}
+
+dvbRcsFwdStatusRxPower OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "0.1 dBm"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Provides the power level of the forward link as
+        received at the IDU, in 0.1 dBm units."
+    DEFVAL { -500 }
+::={dvbRcsFwdStatusEntry 16}
+
+--==============================================================
+--  dvbRcsRtnConfig sub-tree object types
+--==============================================================
+dvbRcsRtnConfigMaxEirp OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "x0.1 dBm"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Max Equivalent Isotropic Radiated Power (EIRP) of the RCST,
+         given in resolution of 0.1 dBm and applied when the IDU
+         can, itself, set the necessary IDU TX output level, e.g.,
+         when using a BUC that has a power level detector and that
+         provides sufficient feedback to the IDU."
+::= {dvbRcsRtnConfig 1}
+
+dvbRcsRtnConfigDefIfLevel OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "x0.1 dBm"
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+         "IDU TX output level applied in case the
+         dvbRcsRtnConfigMaxEirp cannot be used.  The resolution
+         is 0.1 dBm and the accuracy is +/- 1 dBm."
+::= {dvbRcsRtnConfig 2}
+
+--==============================================================
+--  dvbRcsRtnStatus sub-tree object types
+--==============================================================
+dvbRcsRtnStatusEbN0 OBJECT-TYPE
+    SYNTAX              Integer32
+    UNITS               "x0.1 dB"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The EbN0 value reported for the return link, referenced
+        to the regular SYNC burst transmission, in 0.1 dB
+
+        units."
+::= {dvbRcsRtnStatus 1}
+
+dvbRcsRtnStatusSFDuration OBJECT-TYPE
+    SYNTAX              Unsigned32 (250..7500)
+    UNITS               "0.1 ms"
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The duration of the currently applied return link
+        superframe structure, in tenths of milliseconds."
+::= {dvbRcsRtnStatus 2}
+
+dvbRcsRtnStatusPayloadUnit OBJECT-TYPE
+    SYNTAX              INTEGER   {
+                                  unitATM    (0),
+                                  unitMPEG   (1)
+    }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Indicates if the payload unit used for the return link
+        is ATM or MPEG."
+::= {dvbRcsRtnStatus 3}
+
+--=============================================================
+--    conformance information
+--=============================================================
+dvbRcsRcstGroups          OBJECT IDENTIFIER ::=
+{dvbRcsConformance 1}
+dvbRcsRcstCompliances     OBJECT IDENTIFIER ::=
+{dvbRcsConformance 2}
+
+--=============================================================
+--    conformance statements
+--=============================================================
+dvbRcsRcstCompliance1 MODULE-COMPLIANCE
+     STATUS          current
+     DESCRIPTION
+         "The compliance statement for DVB-RCS terminals that
+         are compliant with SatLabs System Recommendations.
+         Compliance is linked to the support by the terminal of
+         the options or features defined in the SatLabs System
+         Recommendations.
+         The supported options and features of a terminal are
+         declared in objects
+         dvbRcsSystemSatLabsOptionsDeclaration
+         and dvbRcsSystemSatLabsFeaturesDeclaration
+
+         respectively."
+
+    MODULE  -- this module
+
+           MANDATORY-GROUPS    {dvbRcsRcstSystemGroup,
+dvbRcsRcstNetworkGroup, dvbRcsRcstInstallGroup,
+dvbRcsRcstQosGroup, dvbRcsRcstControlGroup,
+dvbRcsRcstStateGroup, dvbRcsFwdConfigGroup,
+dvbRcsFwdStatusGroup, dvbRcsRtnConfigGroup,
+dvbRcsRtnStatusGroup}
+
+GROUP dvbRcsRcstExtNetworkGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports extended
+         networking management functionality.  Such RCST is qualified
+         as supporting the EXTNETWORK feature, as defined in the
+         SatLabs System Recommendations."
+
+GROUP dvbRcsRcstDnsGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports the DNS
+         protocol.  Such RCST is qualified as supporting the DNS
+         option, as defined in the SatLabs System Recommendations."
+
+GROUP dvbRcsRcstExtInstallGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports the
+         installation log file.  Such RCST is qualified as supporting
+         the INSTALL_LOG feature, as defined in the SatLabs System
+         Recommendations."
+
+GROUP dvbRcsRcstEnhancedClassifierGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports the
+         enhanced classifier feature.  Such RCST is qualified as
+         supporting the ENHCLASSIFIER feature, as defined in the
+         SatLabs System Recommendations."
+
+GROUP dvbRcsRcstMpegQosGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports MPEG
+         traffic bursts.  Such RCST is qualified as supporting the
+         MPEG_TRF option, as defined in the SatLabs System
+         Recommendations."
+
+GROUP dvbRcsRcstGlobalQosGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports global
+
+         RCST QoS configuration data.  Such RCST is qualified as
+         supporting the RCST_PARA feature, as defined in the SatLabs
+         System Recommendations."
+
+GROUP dvbRcsRcstStrictQosGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports strict
+         channel ID dispatching.  Such RCST is qualified as
+         supporting the CHID_STRICT option, as defined in the SatLabs
+         System Recommendations."
+
+GROUP dvbRcsRcstExtControlGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports extended
+         control management functionality.  Such RCST is qualified as
+         supporting the EXTCONTROL feature, as defined in the SatLabs
+         System Recommendations."
+
+GROUP dvbRcsRtnExtConfigGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports extended
+         return link configuration management functionality.  Such
+         RCST is qualified as supporting the EXTCONFIG feature, as
+         defined in the SatLabs System Recommendations."
+
+GROUP dvbRcsRtnExtStatusGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports extended
+         return link status report functionality.  Such RCST is
+         qualified as supporting the EXTSTATUS feature, as defined in
+         the SatLabs System Recommendations."
+
+GROUP dvbRcsRcstOduListGroup
+     DESCRIPTION
+         "This group is mandatory for an RCST that supports the ODU
+         structural entities defined under dvbRcsOduTx, dvbRcsOduRx,
+         and dvbRcsOduAntenna.  Such RCST is qualified as supporting
+         the ODULIST feature, as defined in the SatLabs System
+         Recommendations."
+
+OBJECT dvbRcsSystemOduAntennaSize
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduAntennaGain
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduSspa
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduTxType
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduRxType
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduRxBand
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduRxLO
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Write access must be supported if dvbRcsRcstOduListGroup is
+         not supported."
+
+OBJECT dvbRcsSystemOduTxLO
+  MIN-ACCESS read-only
+  DESCRIPTION
+      "Write access must be supported if dvbRcsRcstOduListGroup is
+      not supported."
+
+OBJECT dvbRcsNetworkOamInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsNetworkOamInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsNetworkLanInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsNetworkLanInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPrimaryDnsServerInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPrimaryDnsServerInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsSecondaryDnsServerInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsSecondaryDnsServerInetAddress
+      SYNTAX InetAddress (SIZE(4))
+      DESCRIPTION
+          "An implementation is only required to support IPv4
+          addresses."
+
+OBJECT dvbRcsNetworkNccMgtInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsNetworkNccMgtInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPktClassDscpLow
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports the
+         enhanced classifier feature.  Such RCST is qualified as
+         supporting the ENHCLASSIFIER feature, as defined in the
+         SatLabs System Recommendations."
+
+OBJECT dvbRcsPktClassDscpHigh
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports the
+         enhanced classifier feature.  Such RCST is qualified as
+         supporting the ENHCLASSIFIER feature, as defined in the
+         SatLabs System Recommendations."
+
+OBJECT dvbRcsPktClassDscpMarkValue
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports the
+         enhanced classifier feature.  Such RCST is qualified as
+         supporting the ENHCLASSIFIER feature, as defined in the
+         SatLabs System Recommendations."
+
+OBJECT dvbRcsPktClassSrcInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPktClassSrcInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPktClassDstInetAddressType
+     SYNTAX InetAddressType { ipv4(1) }
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPktClassDstInetAddress
+     SYNTAX InetAddress (SIZE(4))
+     DESCRIPTION
+         "An implementation is only required to support IPv4
+         addresses."
+
+OBJECT dvbRcsPhbName
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Create access only required if the RCST supports extended
+        management support.  Such RCST is qualified as supporting
+        the SNMPMISC option, as defined in the SatLabs System
+        Recommendations."
+
+OBJECT dvbRcsPhbRequestClassAssociation
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support.  Such RCST is qualified as supporting
+         the SNMPMISC option, as defined in the SatLabs System
+         Recommendations."
+
+OBJECT dvbRcsPhbMappingRowStatus
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support.  Such RCST is qualified as supporting
+         the SNMPMISC option, as defined in the SatLabs System
+         Recommendations."
+
+OBJECT dvbRcsRequestClassName
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support.  Such RCST is qualified as supporting
+         the SNMPMISC option, as defined in the SatLabs System
+         Recommendations."
+
+OBJECT dvbRcsRequestClassChanId
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support.  Such RCST is qualified as supporting
+         the SNMPMISC option, as defined in the SatLabs System
+         Recommendations."
+
+OBJECT dvbRcsRequestClassVccVpi
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Create access only required if the RCST supports extended
+        management support.  Such RCST is qualified as supporting
+        the SNMPMISC option, as defined in the SatLabs System
+        Recommendations."
+
+OBJECT dvbRcsRequestClassVccVci
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support.  Such RCST is qualified as supporting
+         the SNMPMISC option, as defined in the SatLabs System
+         Recommendations."
+
+OBJECT dvbRcsRequestClassPidPoolReference
+     MIN-ACCESS not-accessible
+     DESCRIPTION
+         "Read-only access required if the RCST supports MPEG traffic
+         bursts, according to the MPEG_TRF option, as defined in the
+         SatLabs System Recommendations.  Create access only required
+         if the RCST also supports extended management support,
+         according to the SNMPMISC option, as defined in the SatLabs
+         System Recommendations."
+
+OBJECT dvbRcsRequestClassCra
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsRequestClassRbdcMax
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsRequestClassRbdcTimeout
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsRequestClassVbdcMax
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsRequestClassVbdcTimeout
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsRequestClassVbdcMaxBackLog
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsRequestClassRowStatus
+     MIN-ACCESS read-only
+     DESCRIPTION
+         "Create access only required if the RCST supports extended
+         management support, according to the SNMPMISC option, as
+         defined in the SatLabs System Recommendations."
+
+OBJECT dvbRcsPidValue
+     MIN-ACCESS not-accessible
+     DESCRIPTION
+         "Read-only access required if the RCST supports MPEG traffic
+         bursts, according to the MPEG_TRF option, as defined in the
+         SatLabs System Recommendations.  Create access only required
+         if the RCST also supports extended management support,
+         according to the SNMPMISC option, as defined in the SatLabs
+         System Recommendations."
+
+OBJECT dvbRcsPidPoolRowStatus
+     MIN-ACCESS not-accessible
+     DESCRIPTION
+         "Read-only access required if the RCST supports MPEG traffic
+         bursts, according to the MPEG_TRF option, as defined in the
+         SatLabs System Recommendations.  Create access only required
+         if the RCST also supports extended management support,
+         according to the SNMPMISC option, as defined in the SatLabs
+         System Recommendations."
+        ::= {dvbRcsRcstCompliances 1}
+
+--=============================================================
+--    units of conformance
+--=============================================================
+
+--=============================================================
+--    object groups for RCST system
+--=============================================================
+dvbRcsRcstSystemGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsSystemMibRevision,
+        dvbRcsSystemSatLabsProfilesDeclaration,
+        dvbRcsSystemSatLabsOptionsDeclaration,
+        dvbRcsSystemSatLabsFeaturesDeclaration,
+        dvbRcsSystemLocation,
+        dvbRcsSystemOduAntennaSize,
+        dvbRcsSystemOduAntennaGain,
+        dvbRcsSystemOduSspa,
+        dvbRcsSystemOduTxType,
+        dvbRcsSystemOduRxType,
+        dvbRcsSystemOduRxBand,
+        dvbRcsSystemOduRxLO,
+        dvbRcsSystemOduTxLO,
+        dvbRcsTcpPep,
+        dvbRcsHttpPep
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing information
+        applicable for basic device management support."
+::= {dvbRcsRcstGroups 1}
+
+--=============================================================
+--    object groups for RCST networking
+--=============================================================
+dvbRcsRcstNetworkGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsNetworkOamInetAddressType,
+        dvbRcsNetworkOamInetAddress,
+        dvbRcsNetworkOamInetAddressPrefixLength,
+        dvbRcsNetworkLanInetAddressType,
+        dvbRcsNetworkLanInetAddress,
+        dvbRcsNetworkLanInetAddressPrefixLength,
+        dvbRcsNetworkConfigFileDownloadUrl,
+        dvbRcsNetworkConfigFileUploadUrl,
+        dvbRcsNetworkLogFileUploadUrl
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing basic networking
+        management support."
+::= {dvbRcsRcstGroups 2}
+
+dvbRcsRcstExtNetworkGroup OBJECT-GROUP
+    OBJECTS {
+      dvbRcsNetworkOamInetAddressAssign,
+      dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType,
+      dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress,
+      dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength,
+      dvbRcsNetworkNccMgtInetAddressType,
+      dvbRcsNetworkNccMgtInetAddress,
+      dvbRcsNetworkNccMgtInetAddressPrefixLength
+      }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing extended networking
+        management support."
+::= {dvbRcsRcstGroups 3}
+
+dvbRcsRcstDnsGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsPrimaryDnsServerInetAddressType,
+        dvbRcsPrimaryDnsServerInetAddress,
+        dvbRcsPrimaryDnsServerInetAddressPrefixLength,
+        dvbRcsSecondaryDnsServerInetAddressType,
+        dvbRcsSecondaryDnsServerInetAddress,
+        dvbRcsSecondaryDnsServerInetAddressPrefixLength
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing DNS management
+        support."
+::= {dvbRcsRcstGroups 4}
+
+--=============================================================
+--    object groups for RCST installation
+--=============================================================
+
+dvbRcsRcstInstallGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsInstallAntennaAlignmentState,
+        dvbRcsInstallCwFrequency,
+        dvbRcsInstallCwMaxDuration,
+        dvbRcsInstallCwPower,
+        dvbRcsInstallCoPolReading,
+        dvbRcsInstallXPolReading,
+        dvbRcsInstallCoPolTarget,
+        dvbRcsInstallXPolTarget,
+        dvbRcsInstallStandByDuration,
+        dvbRcsInstallTargetEsN0
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing information
+        applicable for basic installation support."
+::= {dvbRcsRcstGroups 5}
+
+dvbRcsRcstExtInstallGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsNetworkInstallLogFileDownloadUrl,
+        dvbRcsNetworkInstallLogFileUploadUrl
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing extended device
+        installation support."
+::= {dvbRcsRcstGroups 6}
+
+--=============================================================
+--    object groups for QoS
+--=============================================================
+
+dvbRcsRcstQosGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsPktClassDscpLow,
+       dvbRcsPktClassDscpHigh,
+       dvbRcsPktClassDscpMarkValue,
+       dvbRcsPktClassPhbAssociation,
+       dvbRcsPktClassRowStatus,
+       dvbRcsPhbName,
+       dvbRcsPhbRequestClassAssociation,
+       dvbRcsPhbMappingRowStatus,
+       dvbRcsRequestClassName,
+       dvbRcsRequestClassChanId,
+       dvbRcsRequestClassVccVpi,
+       dvbRcsRequestClassVccVci,
+       dvbRcsRequestClassCra,
+       dvbRcsRequestClassRbdcMax,
+       dvbRcsRequestClassRbdcTimeout,
+       dvbRcsRequestClassVbdcMax,
+       dvbRcsRequestClassVbdcTimeout,
+       dvbRcsRequestClassVbdcMaxBackLog,
+       dvbRcsRequestClassRowStatus
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects providing basic access to QoS
+       configuration data."
+::= {dvbRcsRcstGroups 7}
+
+dvbRcsRcstEnhancedClassifierGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsPktClassIpProtocol,
+       dvbRcsPktClassSrcInetAddressType,
+       dvbRcsPktClassSrcInetAddress,
+       dvbRcsPktClassSrcInetAddressPrefixLength,
+       dvbRcsPktClassDstInetAddressType,
+       dvbRcsPktClassDstInetAddress,
+       dvbRcsPktClassDstInetAddressPrefixLength,
+       dvbRcsPktClassSrcPortLow,
+       dvbRcsPktClassSrcPortHigh,
+       dvbRcsPktClassDstPortLow,
+       dvbRcsPktClassDstPortHigh,
+       dvbRcsPktClassVlanUserPri
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects providing support for
+       management of the enhanced classifier."
+::= {dvbRcsRcstGroups 8}
+
+dvbRcsRcstMpegQosGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsRequestClassPidPoolReference,
+       dvbRcsPidValue,
+       dvbRcsPidPoolRowStatus
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects providing access to
+
+       MPEG-related link QoS configuration data."
+::= {dvbRcsRcstGroups 9}
+
+dvbRcsRcstGlobalQosGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsQosGlobalRbdcMax,
+       dvbRcsQosGlobalVbdcMax,
+       dvbRcsQosGlobalVbdcMaxBackLog
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects providing access to global RCST
+       QoS configuration data."
+::= {dvbRcsRcstGroups 10}
+
+dvbRcsRcstStrictQosGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsQosChannelIdStrictDispatching
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects allowing management of strict
+       channel ID dispatching."
+::= {dvbRcsRcstGroups 11}
+
+--=============================================================
+--    object groups for RCST control
+--=============================================================
+dvbRcsRcstControlGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsCtrlRebootCommand,
+        dvbRcsCtrlUserTrafficDisable,
+        dvbRcsCtrlCwEnable,
+        dvbRcsCtrlDownloadFileCommand,
+        dvbRcsCtrlUploadFileCommand,
+        dvbRcsCtrlActivateConfigFileCommand,
+        dvbRcsCtrlRcstRxReacquire
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects allowing basic RCST control."
+::= {dvbRcsRcstGroups 12}
+
+dvbRcsRcstExtControlGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsCtrlRcstTxDisable,
+        dvbRcsCtrlOduTxReferenceEnable,
+        dvbRcsCtrlOduTxDCEnable,
+        dvbRcsCtrlOduRxDCEnable,
+        dvbRcsCtrlRcstLogonCommand,
+        dvbRcsCtrlRcstLogoffCommand
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects allowing extended RCST
+        control."
+::= {dvbRcsRcstGroups 13}
+
+--=============================================================
+--    object groups for RCST state
+--=============================================================
+
+dvbRcsRcstStateGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsRcstMode,
+        dvbRcsRcstFaultStatus,
+        dvbRcsRcstFwdLinkStatus,
+        dvbRcsRcstLogUpdated,
+        dvbRcsRcstCurrentSoftwareVersion,
+        dvbRcsRcstAlternateSoftwareVersion,
+        dvbRcsRcstActivatedConfigFileVersion,
+        dvbRcsRcstDownloadedConfigFileVersion
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects allowing access to RCST state."
+::= {dvbRcsRcstGroups 14}
+
+--=============================================================
+--    object groups for forward link
+--=============================================================
+
+dvbRcsFwdConfigGroup OBJECT-GROUP
+    OBJECTS {
+            dvbRcsFwdStartPopId,
+            dvbRcsFwdStartFrequency,
+            dvbRcsFwdStartPolar,
+            dvbRcsFwdStartFormat,
+            dvbRcsFwdStartRolloff,
+            dvbRcsFwdStartSymbolRate,
+            dvbRcsFwdStartInnerFec,
+            dvbRcsFwdStartRowStatus
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing basic start forward
+        link configuration support."
+::= {dvbRcsRcstGroups 15}
+
+dvbRcsFwdStatusGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsFwdStatusPopId,
+       dvbRcsFwdStatusIfReference,
+       dvbRcsFwdStatusNetId,
+       dvbRcsFwdStatusNetName,
+       dvbRcsFwdStatusFormat,
+       dvbRcsFwdStatusFrequency,
+       dvbRcsFwdStatusPolar,
+       dvbRcsFwdStatusInnerFec,
+       dvbRcsFwdStatusSymbolRate,
+       dvbRcsFwdStatusRolloff,
+       dvbRcsFwdStatusModulation,
+       dvbRcsFwdStatusFecFrame,
+       dvbRcsFwdStatusPilot,
+       dvbRcsFwdStatusBer,
+       dvbRcsFwdStatusCnr,
+       dvbRcsFwdStatusRxPower
+    }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects providing forward link status."
+::= {dvbRcsRcstGroups 16}
+
+--=============================================================
+--    object groups for return link
+--=============================================================
+ dvbRcsRtnConfigGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsRtnConfigDefIfLevel
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing basic return link
+        configuration support."
+::= {dvbRcsRcstGroups 17}
+
+dvbRcsRtnExtConfigGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsRtnConfigMaxEirp
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects providing extended return link
+
+       configuration support."
+::= {dvbRcsRcstGroups 18}
+
+dvbRcsRtnStatusGroup OBJECT-GROUP
+   OBJECTS {
+       dvbRcsRtnStatusPayloadUnit
+       }
+   STATUS    current
+   DESCRIPTION
+       "A collection of objects allowing access to return link
+       status."
+::= {dvbRcsRcstGroups 19}
+
+dvbRcsRtnExtStatusGroup OBJECT-GROUP
+    OBJECTS {
+        dvbRcsRcstRtnLinkStatus,
+        dvbRcsRtnStatusEbN0,
+        dvbRcsRtnStatusSFDuration
+        }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects allowing access to extended
+        return link status."
+::= {dvbRcsRcstGroups 20}
+
+dvbRcsRcstOduListGroup OBJECT-GROUP
+       OBJECTS {
+           dvbRcsOduTxTypeDescription,
+           dvbRcsOduTxType,
+           dvbRcsOduRxTypeDescription,
+           dvbRcsOduRxType,
+           dvbRcsOduAntennaTypeDescription,
+           dvbRcsOduAntennaType
+           }
+       STATUS    current
+       DESCRIPTION
+           "A collection of objects supporting flexible
+           selection of ODU devices."
+::= {dvbRcsRcstGroups 21}
+
+END
diff --git a/snmp_builder/mibs/EBN-MIB.mib b/snmp_builder/mibs/EBN-MIB.mib
new file mode 100644
index 0000000..c10b5a8
--- /dev/null
+++ b/snmp_builder/mibs/EBN-MIB.mib
@@ -0,0 +1,702 @@
+EBN-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+         MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+                     FROM SNMPv2-SMI
+         MODULE-COMPLIANCE, OBJECT-GROUP
+                     FROM SNMPv2-CONF
+         DisplayString, TEXTUAL-CONVENTION
+                     FROM SNMPv2-TC
+         SnaControlPointName
+                 -- Because the characters allowed in an SNA control
+                 -- point name come from a restricted character set,
+                 -- these names are not subject to internationalization.
+                 FROM APPN-MIB
+         snanauMIB
+                 FROM SNA-NAU-MIB;
+
+ ebnMIB   MODULE-IDENTITY
+        LAST-UPDATED "9804281800Z" -- April 28, 1998
+        ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
+        CONTACT-INFO
+                "
+                        Bob Clouston
+                        Cisco Systems
+                        7025 Kit Creek Road
+                        P.O. Box 14987
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 472 2333
+                        E-mail: clouston@cisco.com
+
+                        Bob Moore
+                        IBM Corporation
+                        BRQA/501
+                        P.O. Box 12195
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 254 4436
+                        E-mail: remoore@us.ibm.com
+                "
+        DESCRIPTION
+            " The MIB Module for Extended Border Node"
+        ::= { snanauMIB 7 }
+
+ -- snanauMIB ::= { mib-2 34 }
+
+ -- ******************************************************************
+ -- Textual Conventions
+ -- ------------------------------------------------------------------
+ SnaNAUWildcardName   ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "Fully-qualified network NAU name. Entries take one of three
+          forms:
+             - Explicit entries do not contain the character '*'.
+             - Partial Wildcard entries have the form 'ccc*', where
+               'ccc' represents one to sixteen characters in a legal
+               SNA NAU Name.
+             - A full wildcard  consists of a single character '*'.
+
+          Because the characters allowed in an SNA NAU name come from
+          a restricted character set, these names are not subject to
+          internationalization."
+ SYNTAX DisplayString(SIZE(1..17))
+
+ -- ******************************************************************
+ ebnObjects              OBJECT IDENTIFIER ::= { ebnMIB 1 }
+ -- ******************************************************************
+
+ -- ******************************************************************
+ -- EBN Directory Group
+ -- The ebnDirTable is an extension to the appnDirTable.  It specifies
+ -- the subnet affiliation for LUs in the EBN's directory.
+ -- ******************************************************************
+
+ ebnDir                  OBJECT IDENTIFIER ::= { ebnObjects 1 }
+
+ ebnDirTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF EbnDirEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The EBN Directory Table.  This table is an extension
+          to the APPN MIB's appnDirTable.  Entries in this table
+          are in one-to-one correspondence with entries in the
+          appnDirTable, with corresponding entries having identical
+          values for their respective indexes."
+      ::= { ebnDir 1 }
+
+ ebnDirEntry OBJECT-TYPE
+      SYNTAX EbnDirEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry in the EBN Directory Table."
+      INDEX { ebnDirLuName }
+      ::= { ebnDirTable 1 }
+
+ EbnDirEntry ::= SEQUENCE {
+         ebnDirLuName             SnaNAUWildcardName,
+         ebnDirSubnetAffiliation  INTEGER     }
+
+ ebnDirLuName OBJECT-TYPE
+      SYNTAX SnaNAUWildcardName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Fully qualified network LU name in the domain of a serving
+          network node.  If this object has the same value as the
+          appnDirLuName object in the APPN MIB, then the two objects
+          are referring to the same LU."
+      ::= { ebnDirEntry 1 }
+
+ ebnDirSubnetAffiliation OBJECT-TYPE
+      SYNTAX INTEGER { native (1),
+                       nonNative (2),
+                       subarea (3) }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Specifies the subnetwork affiliation of the LU:
+              - native(1)    : The LU is in the native APPN subnetwork.
+              - nonNative(2) : The LU is in a non-native APPN subnetwork.
+              - subarea(3)   : The LU is in a subarea network."
+      ::= { ebnDirEntry 2 }
+
+ -- ******************************************************************
+ -- EBN Intermediate Session RSCV Group
+ -- This table is a sparse extension to the appnIsInTable.  For
+ -- sessions crossing ISTGs adjacent to the EBN, it contains the RSCV
+ -- and COS used in the direction of the BIND destination.
+ -- ******************************************************************
+
+ ebnIsRscv               OBJECT IDENTIFIER ::= { ebnObjects 2 }
+
+ ebnIsRscvTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF EbnIsRscvEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The EBN Intermediate Session RSCV table.  This table is an
+          extension to the appnIsInTable.  It contains the RSCV and COS
+          used in the direction of the BIND destination.  There is an
+          entry in this table for each session that traverses an ISTG
+          when it enters or leaves this EBN, with corresponding entries
+          having identical values for their respective indexes."
+      ::= { ebnIsRscv 1}
+
+ ebnIsRscvEntry OBJECT-TYPE
+      SYNTAX EbnIsRscvEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry in ebnIsRscvTable."
+      INDEX { ebnIsRscvCpName,
+              ebnIsRscvPcid }
+      ::= { ebnIsRscvTable 1 }
+
+ EbnIsRscvEntry ::= SEQUENCE {
+         ebnIsRscvCpName            SnaControlPointName,
+         ebnIsRscvPcid              OCTET STRING,
+         ebnIsRscvDestinationRoute  OCTET STRING,
+         ebnIsRscvDestinationCos    DisplayString }
+
+ ebnIsRscvCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The network-qualified control point name of the node at
+          which the session and PCID originated.  For APPN and LEN
+          nodes, this is either CP name of the APPN node at which
+          the origin LU is located or the CP name of the NN serving
+          the LEN node at which the origin LU is located.  For DLUR
+          resources it is the name of the owning SSCP.
+
+          If this object has the same value as the appnIsInFqCpName
+          object in the APPN MIB, then the two objects are referring to
+          the same APPN control point."
+      ::= { ebnIsRscvEntry 1 }
+
+ ebnIsRscvPcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The procedure correlation identifier (PCID) of a session.
+          It is an 8-octet value.
+
+          If this object has the same value as the appnIsInPcid object
+          in the APPN MIB, and if the corresponding ebnIsRscvCpName
+          object has the same value as the corresponding
+          appnIsInFqCpName object, then the entries indexed by these
+          objects are referring to the same session."
+      ::= { ebnIsRscvEntry 2 }
+
+ ebnIsRscvDestinationRoute OBJECT-TYPE
+      SYNTAX OCTET STRING(SIZE (0..255))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The route selection control vector (RSCV x'2B') used in the
+          direction towards the SLU."
+      ::= { ebnIsRscvEntry 3 }
+
+ ebnIsRscvDestinationCos OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The Class of Service (COS) name used in the direction
+          towards the SLU.
+
+          Because the characters allowed in an SNA COS name come from
+          a restricted character set, these names are not subject to
+          internationalization."
+      ::= { ebnIsRscvEntry 4 }
+
+ -- ******************************************************************
+ -- EBN Directory Config Group
+ -- The following simple objects provide information about EBN
+ -- directory.
+ -- ******************************************************************
+
+ ebnDirConfig            OBJECT IDENTIFIER ::= { ebnObjects 3 }
+
+ ebnSearchCacheTime    OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "minutes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The amount of time in minutes an extended border node will
+          retain information about a multi-subnetwork search, once
+          that that search terminates.  A value 0 indicates that the
+          EBN has no defined limit, and the number of entries is
+          bounded only by memory."
+      ::= { ebnDirConfig 1 }
+
+ ebnMaxSearchCache OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "entries"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of multi-subnet entries to be cached.
+          The value 0 indicates that the local node has no defined
+          limit, and the number of entries is bounded only by
+          memory."
+      ::= { ebnDirConfig 2 }
+
+ ebnDefaultSubnetVisitCount  OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "topology subnetworks"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The default maximum number of subnetworks a LOCATE search
+          procedure may traverse."
+      ::= { ebnDirConfig 3 }
+
+ -- ******************************************************************
+ -- EBN COS Mapping Group
+ -- The ebnCosMap Table specifies how non-native COS values are mapped
+ -- to COS values defined in the native subnetwork.  The COS mappings
+ -- that an EBN performs are determined by multiple factors, one of
+ -- which is a set of user-defined mappings.  This table returns the
+ -- COS mappings that the EBN is actually performing, rather than
+ -- the user-defined mappings.
+ -- ******************************************************************
+
+ ebnCOS                  OBJECT IDENTIFIER ::= { ebnObjects 4 }
+
+ ebnCosMapTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF EbnCosMapEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The EBN COS Mapping Table.  This table specifies how non-
+          native COS values are mapped to COS values defined in the
+          native subnetwork.
+
+          Note:  The COS mappings that an EBN performs are determined
+          by multiple factors, one of which is a set of user-defined
+          initial mappings.  This table returns the COS mappings that
+          the EBN is actually performing at the time it is queried,
+          rather than the user-defined initial ones."
+      ::= { ebnCOS 1 }
+
+ ebnCosMapEntry OBJECT-TYPE
+      SYNTAX EbnCosMapEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "An entry in the EBN COS Mapping table."
+      INDEX { ebnCosMapCpName,
+              ebnCosMapNonNativeCos }
+      ::= { ebnCosMapTable 1 }
+
+ EbnCosMapEntry ::= SEQUENCE {
+         ebnCosMapCpName              SnaNAUWildcardName,
+         ebnCosMapNonNativeCos        DisplayString,
+         ebnCosMapNativeCos           DisplayString }
+
+ ebnCosMapCpName OBJECT-TYPE
+      SYNTAX SnaNAUWildcardName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Fully qualified network CP name for which the COS mapping
+          applies."
+      ::= { ebnCosMapEntry 1 }
+
+ ebnCosMapNonNativeCos OBJECT-TYPE
+      SYNTAX DisplayString (SIZE(1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This object contains one of the following values:
+
+             - An 8-character COS name used in a non-native subnetwork.
+             - The single character '*', identifying the entry with the
+               default native COS for a non-native CP name.  This entry
+               is used when there is no entry in the table for a
+               non-native CP name / non-native COS pair.
+
+          Because the characters allowed in an SNA COS name come from
+          a restricted character set, these names are not subject to
+          internationalization."
+      ::= { ebnCosMapEntry 2 }
+
+ ebnCosMapNativeCos OBJECT-TYPE
+      SYNTAX DisplayString (SIZE(1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "An 8-byte name for the class-of-service, as known in the
+          native subnetwork.
+
+          Because the characters allowed in an SNA COS name come from
+          a restricted character set, these names are not subject to
+          internationalization."
+      ::= { ebnCosMapEntry 3 }
+
+ -- ******************************************************************
+ -- EBN Subnet Routing List Group
+ -- The EBN Subnet Routing List indicates to which nodes an EBN
+ -- forwards search request.  This group contains information
+ -- pertaining to the CONFIGURED Subnet Routing List at an EBN.  How a
+ -- particular search request is routed is determined by a transient
+ -- list that the EBN creates based on the configured list and other
+ -- factors.
+ -- *******************************************************************
+
+ ebnSubnetRoutingList    OBJECT IDENTIFIER ::= { ebnObjects 5 }
+
+ ebnSubnetSearchTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF EbnSubnetSearchEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table contains one entry for each fully qualified LU
+          name for which an associated subnet routing list has been
+          defined.  An entry in this table contains general
+          characteristics of the subnet search routing list for an
+          LU name.  The routing list itself is represented by a set
+          of contiguous entries in the ebnSearchTable."
+      ::= { ebnSubnetRoutingList 1 }
+
+ ebnSubnetSearchEntry OBJECT-TYPE
+      SYNTAX EbnSubnetSearchEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "An entry for the ebnSubnetSearchTable.  The entry
+          represents the configured parameters the EBN uses when it
+          is determining how to search for the LU identified by the
+          ebnSubnetSearchLuName object."
+      INDEX { ebnSubnetSearchLuName }
+      ::= { ebnSubnetSearchTable 1 }
+
+ EbnSubnetSearchEntry ::= SEQUENCE {
+         ebnSubnetSearchLuName   SnaNAUWildcardName,
+         ebnSubnetSearchDynamics INTEGER,
+         ebnSubnetSearchOrdering INTEGER   }
+
+ ebnSubnetSearchLuName OBJECT-TYPE
+      SYNTAX SnaNAUWildcardName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Fully qualified network LU name."
+      ::= { ebnSubnetSearchEntry 1 }
+
+ ebnSubnetSearchDynamics OBJECT-TYPE
+      SYNTAX INTEGER { none(1),
+                       limited (2),
+                       full (3) }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether an EBN may add dynamic entries to a
+          subnetwork routing list.  none(1) means no entries may be
+          added to the subnetwork routing list.  limited(2) means
+          only likely entries may be added to the subnetwork routing
+
+          list.  full(3) means all native extended border nodes and
+          adjacent, non-native EBNs and NNs will be added to the
+          subnetwork routing list."
+      ::= { ebnSubnetSearchEntry 2 }
+
+ ebnSubnetSearchOrdering OBJECT-TYPE
+      SYNTAX INTEGER{ priority(1),
+                      defined(2) }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Indicates whether an EBN may reorder a subnetwork routing
+          list so that entries which are more likely to be successful
+          move to the top of the subnetwork routing list and entries
+          which are more likely to be unsuccessful move to the bottom
+          of the list.
+          The following values are defined:
+
+             - priority(1):  Entries may be reordered.
+             - defined(2):   Entries must not be reordered."
+      ::= { ebnSubnetSearchEntry 3 }
+
+ -- Border node search table
+
+ ebnSearchTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF EbnSearchEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table indicates the CONFIGURED list of control points
+          to which the EBN sends Locate searches for a given fully
+          qualified LU name.  Each entry in the table indicates one
+          control point that should be included in a multi-subnet
+          search for a particular LU name."
+      ::= { ebnSubnetRoutingList 2 }
+
+ ebnSearchEntry OBJECT-TYPE
+      SYNTAX EbnSearchEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "An entry in the ebnSearchTable.  An entry can exist in
+          this table only if an entry exists in the
+          ebnSubnetSearchTable with an ebnSubnetSearchLuName value
+          matching this entry's ebnSearchLuName.
+
+          For a given ebnSearchLuName value, the ordering of entries
+          provides by the ebnSearchIndex values corresponds to the
+          order in which the control points to be searched appear in
+          the CONFIGURED search list for the ebnSearchLuName."
+      INDEX { ebnSearchLuName,
+              ebnSearchIndex }
+      ::= { ebnSearchTable 1 }
+
+ EbnSearchEntry ::= SEQUENCE {
+         ebnSearchLuName  SnaNAUWildcardName,
+         ebnSearchIndex   Unsigned32,
+         ebnSearchCpName  DisplayString,
+         ebnSearchSNVC    Unsigned32  }
+
+ ebnSearchLuName OBJECT-TYPE
+      SYNTAX SnaNAUWildcardName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Fully qualified network LU name.  If this object has the
+          same value as the ebnSubnetSearchLuName object, then the
+          two objects are referring to the same LU."
+      ::= { ebnSearchEntry 1 }
+
+ ebnSearchIndex OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Secondary index enumerating the CONFIGURED order in which
+          a search is forwarded to CPs for a particular LU name.  The
+          order for an actual search is determined dynamically by the
+          EBN, based on this configured information and on other
+          factors, including whether search dynamics and search
+          ordering are enabled.  Information on these last two settings
+          is available in, respectively, the ebnSubnetSearchDynamics
+          and ebnSubnetSearch ordering objects."
+      ::= { ebnSearchEntry 2 }
+
+ ebnSearchCpName OBJECT-TYPE
+      SYNTAX DisplayString(SIZE(1..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object specifies the CP(s) to which a search should be
+          forwarded.  It either follows the SnaNAUWildcardName textual
+          convention or takes one of the following special formats:
+
+             '*' indicates that all native EBNs and all adjacent non-
+             native EBNs and NNs may be added to the routing list
+             dynamically,
+             '*SELF' indicates that the EBN should search itself and
+             its native subnetwork at this time during the
+             cross-subnet search,
+             '*EBNS' indicates all native EBNs.
+
+          Because the characters allowed in a CP name come from a
+          restricted character set, and because the three formats
+          listed here use no special characters, this object is not
+          subject to internationalization."
+      ::= { ebnSearchEntry 3 }
+
+ ebnSearchSNVC OBJECT-TYPE
+      SYNTAX Unsigned32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The maximum number of subnets a Locate search procedure may
+          traverse.  "
+      ::= { ebnSearchEntry 4 }
+
+ -- *******************************************************************
+ -- HPR Extended Border Node Intermediate Session Group
+ -- The hbnIsInTable is a sparse extension to the appnIsInTable.
+ -- For sessions that use back-to-back RTP connections in an HBN,
+ -- this table provides the network connection endpoint identifier
+ -- (NceId) and the transport connection identifier (Tcid) for the
+ -- second RTP connection.
+ -- *******************************************************************
+
+ hbn                     OBJECT IDENTIFIER ::= { ebnObjects 6 }
+
+ hbnIsInTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HbnIsInEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The HBN Intermediate Session table."
+      ::= { hbn 1}
+
+ hbnIsInEntry OBJECT-TYPE
+      SYNTAX HbnIsInEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of the HBN Intermediate Session Table.  An entry
+          exists in this table for every intermediate session being
+          routed between back-to-back RTP connections in the HBN.
+
+          When an entry for a session exists in this table, the
+          NceIds and Tcids for the back-to-back RTP connections are
+          made available in the following four objects:
+
+             RTP connection in the direction of the PLU:
+                - NceId:  appnIsInRtpNceId (in the APPN MIB)
+                - Tcid:   appnIsinRtpTcid (in the APPN MIB).
+
+             RTP connection in the direction of the SLU:
+                - NceId:  hbnIsInRtpNceId (in this table)
+                - Tcid:   hbnIsInRtpTcid (in this table)."
+      INDEX { hbnIsInFqCpName,
+              hbnIsInPcid }
+ ::= { hbnIsInTable 1 }
+
+ HbnIsInEntry ::= SEQUENCE {
+         hbnIsInFqCpName    SnaControlPointName,
+         hbnIsInPcid        OCTET STRING,
+         hbnIsInRtpNceId    OCTET STRING,
+         hbnIsInRtpTcid     OCTET STRING }
+
+ hbnIsInFqCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The network-qualified control point name of the node at
+          which the session and PCID originated.  For APPN and LEN
+          nodes, this is either the CP name of the APPN node at
+          which the origin LU is located or the CP name of the NN
+          serving the LEN node at which the origin LU is located.
+
+          If this object has the same value as the appnIsInFqCpName
+          object in the APPN MIB, then the two objects are referring
+          to the same APPN control point."
+      ::= { hbnIsInEntry 1 }
+
+ hbnIsInPcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE(8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The procedure correlation identifier (PCID) of a session.
+          It is an 8-octet value.
+
+          If this object has the same value as the appnIsInPcid object
+          in the APPN MIB, and if the corresponding hbnIsInFqCpName
+          object has the same value as the corresponding
+          appnIsInFqCpName object, then the entries indexed by these
+          objects are referring to the same session."
+      ::= { hbnIsInEntry 2 }
+
+ hbnIsInRtpNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE(1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The HPR local Network Connection Endpoint of the session in
+          the direction of the SLU."
+      ::= { hbnIsInEntry 3 }
+
+ hbnIsInRtpTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE(8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The RTP connection local TCID of the session in the direction
+          of the SLU."
+      ::= { hbnIsInEntry 4 }
+
+ -- *******************************************************************
+ -- Conformance Statement
+ -- *******************************************************************
+ ebnConformance          OBJECT IDENTIFIER ::= { ebnMIB 2 }
+
+ ebnCompliances          OBJECT IDENTIFIER ::= { ebnConformance 1 }
+ ebnGroups               OBJECT IDENTIFIER ::= { ebnConformance 2 }
+
+ -- Compliance statements
+ ebnCompliance     MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "The compliance statement for the SNMPv2 entities which
+       implement the ebnMIB."
+
+   MODULE   -- this module
+
+   --  Unconditionally mandatory groups
+       MANDATORY-GROUPS {
+                 ebnDirectoryGroup,
+                 ebnIsRscvGroup,
+                 ebnDirectoryConfigGroup,
+                 ebnCosMappingGroup,
+                 ebnSubnetRoutingListGroup }
+
+   -- Conditionally mandatory groups
+      GROUP hbnIsInGroup
+      DESCRIPTION
+          "The hbnIsInGroup is mandatory only for HPR extended border
+          nodes."
+      ::= {ebnCompliances 1 }
+
+ -- Group definitions
+ ebnDirectoryGroup OBJECT-GROUP
+      OBJECTS { ebnDirSubnetAffiliation }
+      STATUS current
+      DESCRIPTION
+          "The EBN-related directory objects."
+      ::= { ebnGroups 1 }
+
+ ebnIsRscvGroup OBJECT-GROUP
+      OBJECTS { ebnIsRscvDestinationRoute,
+                ebnIsRscvDestinationCos }
+      STATUS current
+      DESCRIPTION
+          "Two objects representing RSCV and class of service
+          information saved by an EBN."
+      ::= { ebnGroups 2 }
+
+ ebnDirectoryConfigGroup OBJECT-GROUP
+      OBJECTS { ebnSearchCacheTime,
+                ebnMaxSearchCache,
+                ebnDefaultSubnetVisitCount }
+      STATUS current
+      DESCRIPTION
+          "The EBN Directory Configuration Group."
+      ::= { ebnGroups 3 }
+
+ ebnCosMappingGroup OBJECT-GROUP
+      OBJECTS {  ebnCosMapNativeCos }
+      STATUS current
+      DESCRIPTION
+          "The EBN COS Mapping Group."
+      ::= { ebnGroups 4 }
+
+ ebnSubnetRoutingListGroup OBJECT-GROUP
+      OBJECTS { ebnSubnetSearchDynamics,
+                ebnSubnetSearchOrdering,
+                ebnSearchCpName,
+                 ebnSearchSNVC }
+      STATUS current
+      DESCRIPTION
+          "The Subnet Routing List Group."
+      ::= { ebnGroups 5 }
+
+ hbnIsInGroup OBJECT-GROUP
+      OBJECTS { hbnIsInRtpNceId, hbnIsInRtpTcid }
+      STATUS current
+      DESCRIPTION
+          "The HBN-related Intermediate Session Objects."
+      ::= { ebnGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/EFM-CU-MIB.mib b/snmp_builder/mibs/EFM-CU-MIB.mib
new file mode 100644
index 0000000..dde3c35
--- /dev/null
+++ b/snmp_builder/mibs/EFM-CU-MIB.mib
@@ -0,0 +1,2995 @@
+EFM-CU-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32,
+    Unsigned32, Counter32, mib-2
+      FROM SNMPv2-SMI         -- [RFC2578]
+    TEXTUAL-CONVENTION, TruthValue, RowStatus, PhysAddress
+      FROM SNMPv2-TC          -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF        -- [RFC2580]
+    SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
+    ifIndex, ifSpeed
+      FROM IF-MIB             -- [RFC2863]
+    ;
+
+  efmCuMIB MODULE-IDENTITY
+    LAST-UPDATED "200711140000Z"  -- November 14, 2007
+    ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group"
+    CONTACT-INFO
+      "WG charter:
+        http://www.ietf.org/html.charters/OLD/hubmib-charter.html
+
+      Mailing Lists:
+        General Discussion: hubmib@ietf.org
+        To Subscribe: hubmib-request@ietf.org
+        In Body: subscribe your_email_address
+
+      Chair:  Bert Wijnen
+      Postal: Alcatel-Lucent
+              Schagen 33
+              3461 GL Linschoten
+              Netherlands
+       Phone: +31-348-407-775
+       EMail: bwijnen@alcatel-lucent.com
+
+      Editor: Edward Beili
+      Postal: Actelis Networks Inc.
+              25 Bazel St., P.O.B. 10173
+              Petach-Tikva 10173
+              Israel
+       Phone: +972-3-924-3491
+       Email: edward.beili@actelis.com"
+    DESCRIPTION
+      "The objects in this MIB module are used to manage
+      the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces
+      2BASE-TL and 10PASS-TS, defined in IEEE Std. 802.3ah-2004,
+      which is now a part of IEEE Std. 802.3-2005.
+
+      The following references are used throughout this MIB module:
+
+      [802.3ah] refers to:
+        IEEE Std 802.3ah-2004: 'IEEE Standard for Information
+        technology - Telecommunications and information exchange
+        between systems - Local and metropolitan area networks -
+        Specific requirements -
+        Part 3: Carrier Sense Multiple Access with Collision
+        Detection (CSMA/CD) Access Method and Physical Layer
+        Specifications -
+        Amendment: Media Access Control Parameters, Physical
+        Layers and Management Parameters for Subscriber Access
+        Networks', 07 September 2004.
+
+      Of particular interest are Clause 61, 'Physical Coding
+      Sublayer (PCS) and common specifications, type 10PASS-TS and
+      type 2BASE-TL', Clause 30, 'Management', Clause 45,
+      'Management Data Input/Output (MDIO) Interface', Annex 62A,
+      'PMD profiles for 10PASS-TS' and Annex 63A, 'PMD profiles for
+      2BASE-TL'.
+
+      [G.991.2] refers to:
+        ITU-T Recommendation G.991.2: 'Single-pair High-speed Digital
+        Subscriber Line (SHDSL) transceivers', December 2003.
+
+      [ANFP] refers to:
+        NICC Document ND1602:2005/08: 'Specification of the Access
+        Network Frequency Plan (ANFP) applicable to transmission
+        systems used on the BT Access Network,' August 2005.
+
+      The following normative documents are quoted by the DESCRIPTION
+      clauses in this MIB module:
+
+      [G.993.1] refers to:
+        ITU-T Recommendation G.993.1: 'Very High speed Digital
+        Subscriber Line transceivers', June 2004.
+
+      [T1.424] refers to:
+        ANSI T1.424-2004: 'Interface Between Networks and Customer
+        Installation Very-high-bit-rate Digital Subscriber Lines
+        (VDSL) Metallic Interface (DMT Based)', June 2004.
+
+      [TS 101 270-1] refers to:
+        ETSI TS 101 270-1: 'Transmission and Multiplexing (TM);
+        Access transmission systems on metallic access cables;
+        Very high speed Digital Subscriber Line (VDSL); Part 1:
+        Functional requirements', October 2005.
+
+      Naming Conventions:
+        Atn   - Attenuation
+        CO    - Central Office
+        CPE   - Customer Premises Equipment
+        EFM   - Ethernet in the First Mile
+        EFMCu - EFM Copper
+        MDIO  - Management Data Input/Output
+        Mgn   - Margin
+        PAF   - PME Aggregation Function
+        PBO   - Power Back-Off
+        PCS   - Physical Coding Sublayer
+        PMD   - Physical Medium Dependent
+        PME   - Physical Medium Entity
+        PSD   - Power Spectral Density
+        SNR   - Signal to Noise Ratio
+        TCPAM - Trellis Coded Pulse Amplitude Modulation
+
+      Copyright (C) The IETF Trust (2007).  This version
+      of this MIB module is part of RFC 5066;  see the RFC
+      itself for full legal notices."
+
+    REVISION    "200711140000Z"  -- November 14, 2007
+    DESCRIPTION "Initial version, published as RFC 5066."
+    ::= { mib-2 167 }
+
+   -- Sections of the module
+
+   efmCuObjects     OBJECT IDENTIFIER ::= { efmCuMIB 1 }
+
+   efmCuConformance OBJECT IDENTIFIER ::= { efmCuMIB 2 }
+
+   -- Groups in the module
+
+   efmCuPort        OBJECT IDENTIFIER ::= { efmCuObjects 1 }
+
+   efmCuPme         OBJECT IDENTIFIER ::= { efmCuObjects 2 }
+
+   -- Textual Conventions
+
+   EfmProfileIndex ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS       current
+     DESCRIPTION
+       "A unique value, greater than zero, for each PME configuration
+       profile in the managed EFMCu port.  It is RECOMMENDED that
+       values are assigned contiguously starting from 1.  The value
+       for each profile MUST remain constant at least from one
+       re-initialization of the entity's network management system
+       to the next re-initialization."
+     SYNTAX       Unsigned32 (1..255)
+
+   EfmProfileIndexOrZero ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS       current
+     DESCRIPTION
+       "This textual convention is an extension of the
+       EfmProfileIndex convention.  The latter defines a greater than
+       zero value used to identify a PME profile in the managed EFMCu
+       port.  This extension permits the additional value of zero.
+       The value of zero is object-specific and MUST therefore be
+       defined as part of the description of any object that uses
+       this syntax.
+       Examples of the usage of zero value might include situations
+       where the current operational profile is unknown."
+     SYNTAX       Unsigned32 (0..255)
+
+   EfmProfileIndexList ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "1d:"
+     STATUS       current
+     DESCRIPTION
+       "This textual convention represents a list of up to 6
+       EfmProfileIndex values, any of which can be chosen for
+       configuration of a PME in a managed EFMCu port.
+       The EfmProfileIndex textual convention defines a greater than
+       zero value used to identify a PME profile.
+       The value of this object is a concatenation of zero or
+       more (up to 6) octets, where each octet contains an 8-bit
+       EfmProfileIndex value.
+       A zero-length octet string is object-specific and MUST
+       therefore be defined as part of the description of any object
+       that uses this syntax.  Examples of the usage of a zero-length
+       value might include situations where an object using this
+       textual convention is irrelevant for a specific EFMCu port
+       type."
+     SYNTAX       OCTET STRING (SIZE(0..6))
+
+   EfmTruthValueOrUnknown ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This textual convention is an extension of the TruthValue
+       convention.  The latter defines a boolean value with possible
+       values of true(1) and false(2).  This extension permits the
+       additional value of unknown(0), which can be returned as the
+       result of a GET operation when an exact true or false value
+       of the object cannot be determined."
+     SYNTAX       INTEGER { unknown(0), true(1), false(2) }
+
+  -- Port Notifications Group
+
+   efmCuPortNotifications OBJECT IDENTIFIER ::= { efmCuPort 0 }
+
+   efmCuLowRateCrossing NOTIFICATION-TYPE
+     OBJECTS {
+       ifSpeed,
+       efmCuThreshLowRate
+     }
+     STATUS      current
+     DESCRIPTION
+       "This notification indicates that the EFMCu port's data rate
+       has reached/dropped below or exceeded the low rate threshold,
+       specified by efmCuThreshLowRate.
+
+       This notification MAY be sent for the -O subtype ports
+       (2BaseTL-O/10PassTS-O) while the port is Up, on the crossing
+       event in both directions: from normal (rate is above the
+       threshold) to low (rate equals the threshold or below it) and
+
+       from low to normal.  This notification is not applicable to
+       the -R subtypes.
+
+       It is RECOMMENDED that a small debouncing period of 2.5 sec,
+       between the detection of the condition and the notification,
+       is implemented to prevent simultaneous LinkUp/LinkDown and
+       efmCuLowRateCrossing notifications to be sent.
+
+       The adaptive nature of the EFMCu technology allows the port to
+       adapt itself to the changes in the copper environment, e.g.,
+       an impulse noise, alien crosstalk, or a micro-interruption may
+       temporarily drop one or more PMEs in the aggregation group,
+       causing a rate degradation of the aggregated EFMCu link.
+       The dropped PMEs would then try to re-initialize, possibly at
+       a lower rate than before, adjusting the rate to provide
+       required target SNR margin.
+
+       Generation of this notification is controlled by the
+       efmCuLowRateCrossingEnable object."
+     ::= { efmCuPortNotifications 1 }
+
+   -- PCS Port group
+
+   efmCuPortConfTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPortConfEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Table for Configuration of EFMCu 2BASE-TL/10PASS-TS (PCS)
+       Ports.  Entries in this table MUST be maintained in a
+       persistent manner."
+     ::= { efmCuPort 1 }
+
+   efmCuPortConfEntry OBJECT-TYPE
+     SYNTAX      EfmCuPortConfEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu Port Configuration table.
+       Each entry represents an EFMCu port indexed by the ifIndex.
+       Note that an EFMCu PCS port runs on top of a single
+       or multiple PME port(s), which are also indexed by ifIndex."
+     INDEX  { ifIndex }
+     ::= { efmCuPortConfTable 1 }
+
+   EfmCuPortConfEntry ::=
+     SEQUENCE {
+       efmCuPAFAdminState               INTEGER,
+       efmCuPAFDiscoveryCode            PhysAddress,
+       efmCuAdminProfile                EfmProfileIndexList,
+       efmCuTargetDataRate              Unsigned32,
+       efmCuTargetSnrMgn                Unsigned32,
+       efmCuAdaptiveSpectra             TruthValue,
+       efmCuThreshLowRate               Unsigned32,
+       efmCuLowRateCrossingEnable       TruthValue
+     }
+
+   efmCuPAFAdminState  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       enabled(1),
+       disabled(2)
+     }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Administrative (desired) state of the PAF of the EFMCu port
+       (PCS).
+       When 'disabled', PME aggregation will not be performed by the
+       PCS.  No more than a single PME can be assigned to this PCS in
+       this case.
+       When 'enabled', PAF will be performed by the PCS when the link
+       is Up, even on a single attached PME, if PAF is supported.
+
+       PCS ports incapable of supporting PAF SHALL return a value of
+       'disabled'.  Attempts to 'enable' such ports SHALL be
+       rejected.
+
+       A PAF 'enabled' port with multiple PMEs assigned cannot be
+       'disabled'.  Attempts to 'disable' such port SHALL be
+       rejected, until at most one PME is left assigned.
+
+       Changing PAFAdminState is a traffic-disruptive operation and
+       as such SHALL be done when the link is Down.  Attempts to
+       change this object SHALL be rejected if the link is Up or
+       Initializing.
+
+       This object maps to the Clause 30 attribute aPAFAdminState.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then this
+       object maps to the PAF enable bit in the 10P/2B PCS control
+       register.
+
+       This object MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] 61.2.2, 45.2.3.18.3"
+     ::= { efmCuPortConfEntry 1 }
+
+   efmCuPAFDiscoveryCode  OBJECT-TYPE
+     SYNTAX      PhysAddress (SIZE(0|6))
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "PAF Discovery Code of the EFMCu port (PCS).
+       A unique 6-octet code used by the Discovery function,
+       when PAF is supported.
+       PCS ports incapable of supporting PAF SHALL return a
+       zero-length octet string on an attempt to read this object.
+       An attempt to write to this object SHALL be rejected for such
+       ports.
+       This object MUST be instantiated for the -O subtype PCS before
+       writing operations on the efmCuPAFRemoteDiscoveryCode
+       (Set_if_Clear and Clear_if_Same) are performed by PMEs
+       associated with the PCS.
+       The initial value of this object for -R subtype ports after
+       reset is all zeroes.  For -R subtype ports, the value of this
+       object cannot be changed directly.  This value may be changed
+       as a result of writing operation on the
+       efmCuPAFRemoteDiscoveryCode object of remote PME of -O
+       subtype, connected to one of the local PMEs associated with
+       the PCS.
+
+       Discovery MUST be performed when the link is Down.
+       Attempts to change this object MUST be rejected (in case of
+       SNMP with the error inconsistentValue), if the link is Up or
+       Initializing.
+
+       The PAF Discovery Code maps to the local Discovery code
+       variable in PAF (note that it does not have a corresponding
+       Clause 45 register)."
+     REFERENCE
+       "[802.3ah] 61.2.2.8.3, 61.2.2.8.4, 45.2.6.6.1, 45.2.6.8,
+       61A.2"
+     ::= { efmCuPortConfEntry 2 }
+
+   efmCuAdminProfile  OBJECT-TYPE
+     SYNTAX      EfmProfileIndexList
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Desired configuration profile(s), common for all PMEs in the
+       EFMCu port.  This object is a list of pointers to entries in
+       either efmCuPme2BProfileTable or
+       efmCuPme10PProfileTable, depending on the current
+       operating SubType of the EFMCu port as indicated by
+       efmCuPortSide.
+
+       The value of this object is a list of up to 6 indices of
+       profiles.  If this list consists of a single profile index,
+       then all PMEs assigned to this EFMCu port SHALL be configured
+       according to the profile referenced by that index, unless it
+       is overwritten by a corresponding non-zero
+       efmCuPmeAdminProfile instance, which takes precedence over
+       efmCuAdminProfile.
+       A list consisting of more than one index allows each PME
+       in the port to be configured according to any profile
+       specified in the list.
+       By default, this object has a value of 0x01, referencing the
+       1st entry in efmCuPme2BProfileTable or
+       efmCuPme10PProfileTable.
+
+       This object is writable and readable for the -O subtype
+       (2BaseTL-O or 10PassTS-O) EFMCu ports.  It is irrelevant for
+       the -R  subtype (2BaseTL-R or 10PassTS-R) ports -- a
+       zero-length octet string SHALL be returned on an attempt to
+       read this object and an attempt to change this object MUST be
+       rejected in this case.
+
+       Note that the current operational profile value is available
+       via the efmCuPmeOperProfile object.
+
+       Any modification of this object MUST be performed when the
+       link is Down.  Attempts to change this object MUST be
+       rejected, if the link is Up or Initializing.
+       Attempts to set this object to a list with a member value that
+       is not the value of the index for an active entry in the
+       corresponding profile table MUST be rejected.
+
+       This object maps to the Clause 30 attribute aProfileSelect.
+
+       This object MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] 30.11.2.1.6"
+     DEFVAL { '01'H }
+     ::= { efmCuPortConfEntry 3 }
+
+   efmCuTargetDataRate  OBJECT-TYPE
+     SYNTAX      Unsigned32(1..100000|999999)
+     UNITS       "Kbps"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Desired EFMCu port 'net' (as seen across MII) Data Rate in
+       Kbps, to be achieved during initialization, under spectral
+       restrictions placed on each PME via efmCuAdminProfile or
+
+       efmCuPmeAdminProfile, with the desired SNR margin specified by
+       efmCuTargetSnrMgn.
+       In case of PAF, this object represents a sum of individual PME
+       data rates, modified to compensate for fragmentation and
+       64/65-octet encapsulation overhead (e.g., target data rate of
+       10 Mbps SHALL allow lossless transmission of a full-duplex
+       10 Mbps Ethernet frame stream with minimal inter-frame gap).
+
+       The value is limited above by 100 Mbps as this is the max
+       burst rate across MII for EFMCu ports.
+
+       The value between 1 and 100000 indicates that the total data
+       rate (ifSpeed) of the EFMCu port after initialization SHALL be
+       equal to the target data rate or less, if the target data rate
+       cannot be achieved under spectral restrictions specified by
+       efmCuAdminProfile/efmCuPmeAdminProfile and with the desired
+       SNR margin.  In case the copper environment allows a higher
+       total data rate to be achieved than that specified by the
+       target, the excess capability SHALL be either converted to
+       additional SNR margin or reclaimed by minimizing transmit
+       power as controlled by efmCuAdaptiveSpectra.
+
+       The value of 999999 means that the target data rate is not
+       fixed and SHALL be set to the maximum attainable rate during
+       initialization (Best Effort), under specified spectral
+       restrictions and with the desired SNR margin.
+
+       This object is read-write for the -O subtype EFMCu ports
+       (2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+       Changing of the Target Data Rate MUST be performed when the
+       link is Down.  Attempts to change this object MUST be rejected
+       (in case of SNMP with the error inconsistentValue), if the
+       link is Up or Initializing.
+
+       Note that the current Data Rate of the EFMCu port is
+       represented by the ifSpeed object of IF-MIB.
+
+       This object MUST be maintained in a persistent manner."
+     ::= { efmCuPortConfEntry 4 }
+
+   efmCuTargetSnrMgn  OBJECT-TYPE
+     SYNTAX      Unsigned32(0..21)
+     UNITS       "dB"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Desired EFMCu port SNR margin to be achieved on all PMEs
+
+       assigned to the port, during initialization. (The SNR margin
+       is the difference between the desired SNR and the actual SNR).
+
+       Note that 802.3ah recommends using a default target SNR margin
+       of 5 dB for 2BASE-TL ports and 6 dB for 10PASS-TS ports in
+       order to achieve a mean Bit Error Rate (BER) of 10^-7 at the
+       PMA service interface.
+
+       This object is read-write for the -O subtype EFMCu ports
+       (2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+       Changing of the target SNR margin MUST be performed when the
+       link is Down.  Attempts to change this object MUST be rejected
+       (in case of SNMP with the error inconsistentValue), if the
+       link is Up or Initializing.
+
+       Note that the current SNR margin of the PMEs comprising the
+       EFMCu port is represented by efmCuPmeSnrMgn.
+
+       This object MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] 61.1.2"
+     ::= { efmCuPortConfEntry 5 }
+
+   efmCuAdaptiveSpectra  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates how to utilize excess capacity when the copper
+       environment allows a higher total data rate to be achieved
+       than that specified by the efmCuTargetDataRate.
+
+       A value of true(1) indicates that the excess capability SHALL
+       be reclaimed by minimizing transmit power, e.g., using higher
+       constellations and Power Back-Off, in order to reduce
+       interference to other copper pairs in the binder and the
+       adverse impact to link/system performance.
+
+       A value of false(2) indicates that the excess capability SHALL
+       be converted to additional SNR margin and spread evenly across
+       all active PMEs assigned to the (PCS) port, to increase link
+       robustness.
+
+       This object is read-write for the -O subtype EFMCu ports
+       (2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+       Changing of this object MUST be performed when the link is
+
+       Down.  Attempts to change this object MUST be rejected (in
+       case of SNMP with the error inconsistentValue), if the link
+       is Up or Initializing.
+
+       This object MUST be maintained in a persistent manner."
+     ::= { efmCuPortConfEntry 6 }
+
+   efmCuThreshLowRate  OBJECT-TYPE
+     SYNTAX      Unsigned32(1..100000)
+     UNITS       "Kbps"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "This object configures the EFMCu port low-rate crossing alarm
+       threshold.  When the current value of ifSpeed for this port
+       reaches/drops below or exceeds this threshold, an
+       efmCuLowRateCrossing notification MAY be generated if enabled
+       by efmCuLowRateCrossingEnable.
+
+       This object is read-write for the -O subtype EFMCu ports
+       (2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+       This object MUST be maintained in a persistent manner."
+     ::= { efmCuPortConfEntry 7 }
+
+   efmCuLowRateCrossingEnable  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates whether efmCuLowRateCrossing notifications should
+       be generated for this interface.
+
+       A value of true(1) indicates that efmCuLowRateCrossing
+       notification is enabled.  A value of false(2) indicates that
+       the notification is disabled.
+
+       This object is read-write for the -O subtype EFMCu ports
+       (2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+       This object MUST be maintained in a persistent manner."
+     ::= { efmCuPortConfEntry 8 }
+
+   efmCuPortCapabilityTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPortCapabilityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Table for Capabilities of EFMCu 2BASE-TL/10PASS-TS (PCS)
+       Ports.  Entries in this table MUST be maintained in a
+       persistent manner"
+     ::= { efmCuPort 2 }
+
+   efmCuPortCapabilityEntry OBJECT-TYPE
+     SYNTAX      EfmCuPortCapabilityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu Port Capability table.
+       Each entry represents an EFMCu port indexed by the ifIndex.
+       Note that an EFMCu PCS port runs on top of a single
+       or multiple PME port(s), which are also indexed by ifIndex."
+     INDEX  { ifIndex }
+     ::= { efmCuPortCapabilityTable 1 }
+
+   EfmCuPortCapabilityEntry ::=
+     SEQUENCE {
+       efmCuPAFSupported                TruthValue,
+       efmCuPeerPAFSupported            EfmTruthValueOrUnknown,
+       efmCuPAFCapacity                 Unsigned32,
+       efmCuPeerPAFCapacity             Unsigned32
+     }
+
+   efmCuPAFSupported  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "PME Aggregation Function (PAF) capability of the EFMCu port
+       (PCS).
+       This object has a value of true(1) when the PCS can perform
+       PME aggregation on the available PMEs.
+       Ports incapable of PAF SHALL return a value of false(2).
+
+       This object maps to the Clause 30 attribute aPAFSupported.
+
+       If a Clause 45 MDIO Interface to the PCS is present,
+       then this object maps to the PAF available bit in the
+       10P/2B capability register."
+     REFERENCE
+       "[802.3ah] 61.2.2, 30.11.1.1.4, 45.2.3.17.1"
+     ::= { efmCuPortCapabilityEntry 1 }
+
+   efmCuPeerPAFSupported  OBJECT-TYPE
+     SYNTAX      EfmTruthValueOrUnknown
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "PME Aggregation Function (PAF) capability of the EFMCu port
+       (PCS) link partner.
+       This object has a value of true(1) when the remote PCS can
+       perform PME aggregation on its available PMEs.
+       Ports whose peers are incapable of PAF SHALL return a value
+       of false(2).
+       Ports whose peers cannot be reached because of the link
+       state SHALL return a value of unknown(0).
+
+       This object maps to the Clause 30 attribute
+       aRemotePAFSupported.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the Remote PAF supported bit in the
+       10P/2B capability register."
+     REFERENCE
+       "[802.3ah] 61.2.2, 30.11.1.1.9, 45.2.3.17.2"
+     ::= { efmCuPortCapabilityEntry 2 }
+
+   efmCuPAFCapacity  OBJECT-TYPE
+     SYNTAX      Unsigned32 (1..32)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Number of PMEs that can be aggregated by the local PAF.
+       The number of PMEs currently assigned to a particular
+       EFMCu port (efmCuNumPMEs) is never greater than
+       efmCuPAFCapacity.
+
+       This object maps to the Clause 30 attribute
+       aLocalPAFCapacity."
+     REFERENCE
+       "[802.3ah] 61.2.2, 30.11.1.1.6"
+     ::= { efmCuPortCapabilityEntry 3 }
+
+   efmCuPeerPAFCapacity  OBJECT-TYPE
+     SYNTAX      Unsigned32 (0|1..32)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Number of PMEs that can be aggregated by the PAF of the peer
+       PHY (PCS port).
+       A value of 0 is returned when peer PAF capacity is unknown
+       (peer cannot be reached).
+
+       This object maps to the Clause 30 attribute
+       aRemotePAFCapacity."
+     REFERENCE
+       "[802.3ah] 61.2.2, 30.11.1.1.10"
+     ::= { efmCuPortCapabilityEntry 4 }
+
+   efmCuPortStatusTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPortStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table provides overall status information of EFMCu
+       2BASE-TL/10PASS-TS ports, complementing the generic status
+       information from the ifTable of IF-MIB and ifMauTable of
+       MAU-MIB.  Additional status information about connected PMEs
+       is available from the efmCuPmeStatusTable.
+
+       This table contains live data from the equipment.  As such,
+       it is NOT persistent."
+     ::= { efmCuPort 3 }
+
+   efmCuPortStatusEntry OBJECT-TYPE
+     SYNTAX      EfmCuPortStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu Port Status table.
+       Each entry represents an EFMCu port indexed by the ifIndex.
+       Note that an EFMCu PCS port runs on top of a single
+       or multiple PME port(s), which are also indexed by ifIndex."
+     INDEX  { ifIndex }
+     ::= { efmCuPortStatusTable 1 }
+
+   EfmCuPortStatusEntry ::=
+     SEQUENCE {
+       efmCuFltStatus                   BITS,
+       efmCuPortSide                    INTEGER,
+       efmCuNumPMEs                     Unsigned32,
+       efmCuPAFInErrors                 Counter32,
+       efmCuPAFInSmallFragments         Counter32,
+       efmCuPAFInLargeFragments         Counter32,
+       efmCuPAFInBadFragments           Counter32,
+       efmCuPAFInLostFragments          Counter32,
+       efmCuPAFInLostStarts             Counter32,
+       efmCuPAFInLostEnds               Counter32,
+       efmCuPAFInOverflows              Counter32
+     }
+
+   efmCuFltStatus  OBJECT-TYPE
+     SYNTAX      BITS {
+       noPeer(0),
+       peerPowerLoss(1),
+       pmeSubTypeMismatch(2),
+       lowRate(3)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "EFMCu (PCS) port Fault Status.  This is a bitmap of possible
+       conditions.  The various bit positions are:
+         noPeer              - the peer PHY cannot be reached (e.g.,
+                               no PMEs attached, all PMEs are Down,
+                               etc.). More info is available in
+                               efmCuPmeFltStatus.
+         peerPowerLoss       - the peer PHY has indicated impending
+                               unit failure due to loss of local
+                               power ('Dying Gasp').
+         pmeSubTypeMismatch  - local PMEs in the aggregation group
+                               are not of the same subtype, e.g.,
+                               some PMEs in the local device are -O
+                               while others are -R subtype.
+         lowRate             - ifSpeed of the port reached or dropped
+                               below efmCuThreshLowRate.
+
+       This object is intended to supplement the ifOperStatus object
+       in IF-MIB and ifMauMediaAvailable in MAU-MIB.
+
+       Additional information is available via the efmCuPmeFltStatus
+       object for each PME in the aggregation group (single PME if
+       PAF is disabled)."
+     REFERENCE
+       "IF-MIB, ifOperStatus; MAU-MIB, ifMauMediaAvailable;
+        efmCuPmeFltStatus"
+     ::= { efmCuPortStatusEntry 1 }
+
+   efmCuPortSide  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       subscriber(1),
+       office(2),
+       unknown(3)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "EFM port mode of operation (subtype).
+       The value of 'subscriber' indicates that the port is
+
+       designated as '-R' subtype (all PMEs assigned to this port are
+       of subtype '-R').
+       The value of the 'office' indicates that the port is
+       designated as '-O' subtype (all PMEs assigned to this port are
+       of subtype '-O').
+       The value of 'unknown' indicates that the port has no assigned
+       PMEs yet or that the assigned PMEs are not of the same side
+       (subTypePMEMismatch).
+
+       This object partially maps to the Clause 30 attribute
+       aPhyEnd."
+     REFERENCE
+        "[802.3ah] 61.1, 30.11.1.1.2"
+     ::= { efmCuPortStatusEntry 2 }
+
+   efmCuNumPMEs  OBJECT-TYPE
+     SYNTAX      Unsigned32 (0..32)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of PMEs that is currently aggregated by the local
+       PAF (assigned to the EFMCu port using the ifStackTable).
+       This number is never greater than efmCuPAFCapacity.
+
+       This object SHALL be automatically incremented or decremented
+       when a PME is added or deleted to/from the EFMCu port using
+       the ifStackTable."
+     REFERENCE
+       "[802.3ah] 61.2.2, 30.11.1.1.6"
+     ::= { efmCuPortStatusEntry 3 }
+
+   efmCuPAFInErrors OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of fragments that have been received across the
+       gamma interface with RxErr asserted and discarded.
+       This read-only counter is inactive (not incremented) when the
+       PAF is unsupported or disabled.  Upon disabling the PAF, the
+       counter retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF RX error register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.21"
+     ::= { efmCuPortStatusEntry 4 }
+
+   efmCuPAFInSmallFragments OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of fragments smaller than minFragmentSize
+       (64 bytes) that have been received across the gamma interface
+       and discarded.
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF small fragments register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.22"
+     ::= { efmCuPortStatusEntry 5 }
+
+   efmCuPAFInLargeFragments OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of fragments larger than maxFragmentSize
+       (512 bytes) that have been received across the gamma interface
+       and discarded.
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF large fragments register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.23"
+     ::= { efmCuPortStatusEntry 6 }
+
+   efmCuPAFInBadFragments OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of fragments that do not fit into the sequence
+       expected by the frame assembly function and that have been
+       received across the gamma interface and discarded (the
+       frame buffer is flushed to the next valid frame start).
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF bad fragments register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.25"
+     ::= { efmCuPortStatusEntry 7 }
+
+   efmCuPAFInLostFragments OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of gaps in the sequence of fragments that have
+       been received across the gamma interface (the frame buffer is
+       flushed to the next valid frame start, when fragment/fragments
+       expected by the frame assembly function is/are not received).
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF lost fragment register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.26"
+     ::= { efmCuPortStatusEntry 8 }
+
+   efmCuPAFInLostStarts OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of missing StartOfPacket indicators expected by
+       the frame assembly function.
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF lost start of fragment
+       register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.27"
+     ::= { efmCuPortStatusEntry 9 }
+
+   efmCuPAFInLostEnds OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of missing EndOfPacket indicators expected by the
+       frame assembly function.
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF lost start of fragment
+       register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.28"
+     ::= { efmCuPortStatusEntry 10 }
+
+   efmCuPAFInOverflows OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of fragments, received across the gamma interface
+       and discarded, which would have caused the frame assembly
+       buffer to overflow.
+       This read-only counter is inactive when the PAF is
+       unsupported or disabled.  Upon disabling the PAF, the counter
+       retains its previous value.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then
+       this object maps to the 10P/2B PAF overflow register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.3.24"
+     ::= { efmCuPortStatusEntry 11 }
+
+  -- PME Notifications Group
+
+   efmCuPmeNotifications OBJECT IDENTIFIER ::= { efmCuPme 0 }
+
+   efmCuPmeLineAtnCrossing NOTIFICATION-TYPE
+     OBJECTS {
+       efmCuPmeLineAtn,
+       efmCuPmeThreshLineAtn
+     }
+     STATUS      current
+     DESCRIPTION
+       "This notification indicates that the loop attenuation
+       threshold (as per the efmCuPmeThreshLineAtn
+       value) has been reached/exceeded for the 2BASE-TL/10PASS-TS
+       PME.  This notification MAY be sent on the crossing event in
+       both directions: from normal to exceeded and from exceeded
+       to normal.
+
+       It is RECOMMENDED that a small debouncing period of 2.5 sec,
+       between the detection of the condition and the notification,
+       is implemented to prevent intermittent notifications from
+       being sent.
+
+       Generation of this notification is controlled by the
+       efmCuPmeLineAtnCrossingEnable object."
+     ::= { efmCuPmeNotifications 1 }
+
+   efmCuPmeSnrMgnCrossing NOTIFICATION-TYPE
+     OBJECTS {
+       efmCuPmeSnrMgn,
+       efmCuPmeThreshSnrMgn
+     }
+     STATUS      current
+     DESCRIPTION
+       "This notification indicates that the SNR margin threshold
+       (as per the efmCuPmeThreshSnrMgn value) has been
+       reached/exceeded for the 2BASE-TL/10PASS-TS PME.
+       This notification MAY be sent on the crossing event in
+       both directions: from normal to exceeded and from exceeded
+       to normal.
+
+       It is RECOMMENDED that a small debouncing period of 2.5 sec,
+       between the detection of the condition and the notification,
+       is implemented to prevent intermittent notifications from
+       being sent.
+
+       Generation of this notification is controlled by the
+       efmCuPmeSnrMgnCrossingEnable object."
+     ::= { efmCuPmeNotifications 2 }
+
+   efmCuPmeDeviceFault NOTIFICATION-TYPE
+     OBJECTS {
+       efmCuPmeFltStatus
+     }
+     STATUS      current
+     DESCRIPTION
+       "This notification indicates that a fault in the PME has been
+       detected by a vendor-specific diagnostic or a self-test.
+
+       Generation of this notification is controlled by the
+       efmCuPmeDeviceFaultEnable object."
+     ::= { efmCuPmeNotifications 3 }
+
+   efmCuPmeConfigInitFailure NOTIFICATION-TYPE
+     OBJECTS {
+       efmCuPmeFltStatus,
+       efmCuAdminProfile,
+       efmCuPmeAdminProfile
+     }
+     STATUS      current
+     DESCRIPTION
+       "This notification indicates that PME initialization has
+       failed, due to inability of the PME link to achieve the
+
+       requested configuration profile.
+
+       Generation of this notification is controlled by the
+       efmCuPmeConfigInitFailEnable object."
+     ::= { efmCuPmeNotifications 4 }
+
+   efmCuPmeProtocolInitFailure NOTIFICATION-TYPE
+     OBJECTS {
+       efmCuPmeFltStatus,
+       efmCuPmeOperSubType
+     }
+     STATUS     current
+     DESCRIPTION
+       "This notification indicates that the peer PME was using
+       an incompatible protocol during initialization.
+
+       Generation of this notification is controlled by the
+       efmCuPmeProtocolInitFailEnable object."
+     ::= { efmCuPmeNotifications 5 }
+
+   -- The PME group
+
+   efmCuPmeConfTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPmeConfEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Table for Configuration of common aspects for EFMCu
+       2BASE-TL/10PASS-TS PME ports (modems).  Configuration of
+       aspects specific to 2BASE-TL or 10PASS-TS PME types is
+       represented in efmCuPme2BConfTable and efmCuPme10PConfTable,
+       respectively.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+     ::= { efmCuPme 1 }
+
+   efmCuPmeConfEntry OBJECT-TYPE
+     SYNTAX      EfmCuPmeConfEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu PME Configuration table.
+       Each entry represents common aspects of an EFMCu PME port
+       indexed by the ifIndex.  Note that an EFMCu PME port can be
+       stacked below a single PCS port, also indexed by ifIndex,
+       possibly together with other PME ports if PAF is enabled."
+     INDEX  { ifIndex }
+     ::= { efmCuPmeConfTable 1 }
+
+   EfmCuPmeConfEntry ::=
+     SEQUENCE {
+       efmCuPmeAdminSubType           INTEGER,
+       efmCuPmeAdminProfile           EfmProfileIndexOrZero,
+       efmCuPAFRemoteDiscoveryCode    PhysAddress,
+       efmCuPmeThreshLineAtn          Integer32,
+       efmCuPmeThreshSnrMgn           Integer32,
+       efmCuPmeLineAtnCrossingEnable  TruthValue,
+       efmCuPmeSnrMgnCrossingEnable   TruthValue,
+       efmCuPmeDeviceFaultEnable      TruthValue,
+       efmCuPmeConfigInitFailEnable   TruthValue,
+       efmCuPmeProtocolInitFailEnable TruthValue
+     }
+
+   efmCuPmeAdminSubType  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       ieee2BaseTLO(1),
+       ieee2BaseTLR(2),
+       ieee10PassTSO(3),
+       ieee10PassTSR(4),
+       ieee2BaseTLor10PassTSR(5),
+       ieee2BaseTLor10PassTSO(6),
+       ieee10PassTSor2BaseTLO(7)
+     }
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Administrative (desired) subtype of the PME.
+       Possible values are:
+         ieee2BaseTLO           - PME SHALL operate as 2BaseTL-O
+         ieee2BaseTLR           - PME SHALL operate as 2BaseTL-R
+         ieee10PassTSO          - PME SHALL operate as 10PassTS-O
+         ieee10PassTSR          - PME SHALL operate as 10PassTS-R
+         ieee2BaseTLor10PassTSR - PME SHALL operate as 2BaseTL-R or
+                                  10PassTS-R.  The actual value will
+                                  be set by the -O link partner
+                                  during initialization (handshake).
+         ieee2BaseTLor10PassTSO - PME SHALL operate as 2BaseTL-O
+                                  (preferred) or 10PassTS-O.  The
+                                  actual value will be set during
+                                  initialization depending on the -R
+                                  link partner capability (i.e., if
+                                  -R is incapable of the preferred
+                                  2BaseTL mode, 10PassTS will be
+                                  used).
+         ieee10PassTSor2BaseTLO - PME SHALL operate as 10PassTS-O
+
+                                  (preferred) or 2BaseTL-O.  The
+                                  actual value will be set during
+                                  initialization depending on the -R
+                                  link partner capability (i.e., if
+                                  -R is incapable of the preferred
+                                  10PassTS mode, 2BaseTL will be
+                                  used).
+
+       Changing efmCuPmeAdminSubType is a traffic-disruptive
+       operation and as such SHALL be done when the link is Down.
+       Attempts to change this object SHALL be rejected if the link
+       is Up or Initializing.
+       Attempts to change this object to an unsupported subtype
+       (see efmCuPmeSubTypesSupported) SHALL be rejected.
+
+       The current operational subtype is indicated by the
+       efmCuPmeOperSubType variable.
+
+       If a Clause 45 MDIO Interface to the PMA/PMD is present, then
+       this object combines values of the Port subtype select bits
+       and the PMA/PMD type selection bits in the 10P/2B PMA/PMD
+       control register."
+     REFERENCE
+       "[802.3ah] 61.1, 45.2.1.11.4, 45.2.1.11.7"
+     ::= { efmCuPmeConfEntry 1 }
+
+   efmCuPmeAdminProfile  OBJECT-TYPE
+     SYNTAX      EfmProfileIndexOrZero
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Desired PME configuration profile.  This object is a pointer
+       to an entry in either the efmCuPme2BProfileTable or the
+       efmCuPme10PProfileTable, depending on the current operating
+       SubType of the PME.  The value of this object is the index of
+       the referenced profile.
+       The value of zero (default) indicates that the PME is
+       configured via the efmCuAdminProfile object for the PCS port
+       to which this PME is assigned.  That is, the profile
+       referenced by efmCuPmeAdminProfile takes precedence
+       over the profile(s) referenced by efmCuAdminProfile.
+
+       This object is writable and readable for the CO subtype PMEs
+       (2BaseTL-O or 10PassTS-O). It is irrelevant for the CPE
+       subtype (2BaseTL-R or 10PassTS-R) -- a zero value SHALL be
+       returned on an attempt to read this object and any attempt
+       to change this object MUST be rejected in this case.
+
+       Note that the current operational profile value is available
+       via efmCuPmeOperProfile object.
+
+       Any modification of this object MUST be performed when the
+       link is Down.  Attempts to change this object MUST be
+       rejected, if the link is Up or Initializing.
+
+       Attempts to set this object to a value that is not the value
+       of the index for an active entry in the corresponding profile
+       table MUST be rejected.
+
+       This object maps to the Clause 30 attribute aProfileSelect.
+
+       This object MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] 30.11.2.1.6"
+     DEFVAL { 0 }
+     ::= { efmCuPmeConfEntry 2 }
+
+   efmCuPAFRemoteDiscoveryCode  OBJECT-TYPE
+     SYNTAX      PhysAddress (SIZE(0|6))
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "PAF Remote Discovery Code of the PME port at the CO.
+       The 6-octet Discovery Code of the peer PCS connected via
+       the PME.
+       Reading this object results in a Discovery Get operation.
+       Setting this object to all zeroes results in a Discovery
+       Clear_if_Same operation (the value of efmCuPAFDiscoveryCode
+       at the peer PCS SHALL be the same as efmCuPAFDiscoveryCode of
+       the local PCS associated with the PME for the operation to
+       succeed).
+       Writing a non-zero value to this object results in a
+       Discovery Set_if_Clear operation.
+       A zero-length octet string SHALL be returned on an attempt to
+       read this object when PAF aggregation is not enabled.
+
+       This object is irrelevant in CPE port (-R) subtypes: in this
+       case, a zero-length octet string SHALL be returned on an
+       attempt to read this object; writing to this object SHALL
+       be rejected.
+
+       Discovery MUST be performed when the link is Down.
+       Attempts to change this object MUST be rejected (in case of
+       SNMP with the error inconsistentValue), if the link is Up or
+       Initializing.
+
+       If a Clause 45 MDIO Interface to the PMA/PMD is present, then
+       this object is a function of 10P/2B aggregation discovery
+       control register, Discovery operation result bits in 10P/2B
+       aggregation and discovery status register and
+       10P/2B aggregation discovery code register."
+     REFERENCE
+       "[802.3ah] 61.2.2.8.4, 45.2.6.6-45.2.6.8"
+     ::= { efmCuPmeConfEntry 3 }
+
+   efmCuPmeThreshLineAtn  OBJECT-TYPE
+     SYNTAX  Integer32(-127..128)
+     UNITS       "dB"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Desired Line Attenuation threshold for the 2B/10P PME.
+       This object configures the line attenuation alarm threshold.
+       When the current value of Line Attenuation reaches or
+       exceeds this threshold, an efmCuPmeLineAtnCrossing
+       notification MAY be generated, if enabled by
+       efmCuPmeLineAtnCrossingEnable.
+
+       This object is writable for the CO subtype PMEs (-O).
+       It is read-only for the CPE subtype (-R).
+
+       Changing of the Line Attenuation threshold MUST be performed
+       when the link is Down.  Attempts to change this object MUST be
+       rejected (in case of SNMP with the error inconsistentValue),
+       if the link is Up or Initializing.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object maps to the loop attenuation threshold bits in
+       the 2B PMD line quality thresholds register."
+     REFERENCE
+       "[802.3ah] 45.2.1.36"
+     ::= { efmCuPmeConfEntry 4 }
+
+   efmCuPmeThreshSnrMgn  OBJECT-TYPE
+     SYNTAX      Integer32(-127..128)
+     UNITS       "dB"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Desired SNR margin threshold for the 2B/10P PME.
+       This object configures the SNR margin alarm threshold.
+       When the current value of SNR margin reaches or exceeds this
+       threshold, an efmCuPmeSnrMgnCrossing notification MAY be
+       generated, if enabled by efmCuPmeSnrMgnCrossingEnable.
+
+       This object is writable for the CO subtype PMEs
+       (2BaseTL-O/10PassTS-O).  It is read-only for the CPE subtype
+       (2BaseTL-R/10PassTS-R).
+
+       Changing of the SNR margin threshold MUST be performed when
+       the link is Down.  Attempts to change this object MUST be
+       rejected (in case of SNMP with the error inconsistentValue),
+       if the link is Up or Initializing.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object maps to the SNR margin threshold bits in the 2B PMD
+       line quality thresholds register."
+     REFERENCE
+       "[802.3ah] 45.2.1.36"
+     ::= { efmCuPmeConfEntry 5 }
+
+   efmCuPmeLineAtnCrossingEnable  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates whether efmCuPmeLineAtnCrossing notifications
+       should be generated for this interface.
+
+       A value of true(1) indicates that efmCuPmeLineAtnCrossing
+       notification is enabled.  A value of false(2) indicates that
+       the notification is disabled."
+     ::= { efmCuPmeConfEntry 6 }
+
+   efmCuPmeSnrMgnCrossingEnable  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates whether efmCuPmeSnrMgnCrossing notifications
+       should be generated for this interface.
+
+       A value of true(1) indicates that efmCuPmeSnrMgnCrossing
+       notification is enabled.  A value of false(2) indicates that
+       the notification is disabled."
+     ::= { efmCuPmeConfEntry 7 }
+
+   efmCuPmeDeviceFaultEnable  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates whether efmCuPmeDeviceFault notifications
+
+       should be generated for this interface.
+
+       A value of true(1) indicates that efmCuPmeDeviceFault
+       notification is enabled.  A value of false(2) indicates that
+       the notification is disabled."
+     ::= { efmCuPmeConfEntry 8 }
+
+   efmCuPmeConfigInitFailEnable  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates whether efmCuPmeConfigInitFailure notifications
+       should be generated for this interface.
+
+       A value of true(1) indicates that efmCuPmeConfigInitFailure
+       notification is enabled.  A value of false(2) indicates that
+       the notification is disabled."
+     ::= { efmCuPmeConfEntry 9 }
+
+   efmCuPmeProtocolInitFailEnable  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "Indicates whether efmCuPmeProtocolInitFailure notifications
+       should be generated for this interface.
+
+       A value of true(1) indicates that efmCuPmeProtocolInitFailure
+       notification is enabled.  A value of false(2) indicates that
+       the notification is disabled."
+     ::= { efmCuPmeConfEntry 10 }
+
+   efmCuPmeCapabilityTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPmeCapabilityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Table for the configuration of common aspects for EFMCu
+       2BASE-TL/10PASS-TS PME ports (modems).  The configuration of
+       aspects specific to 2BASE-TL or 10PASS-TS PME types is
+       represented in the efmCuPme2BConfTable and the
+       efmCuPme10PConfTable, respectively.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+     ::= { efmCuPme 2 }
+
+   efmCuPmeCapabilityEntry OBJECT-TYPE
+     SYNTAX      EfmCuPmeCapabilityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu PME Capability table.
+       Each entry represents common aspects of an EFMCu PME port
+       indexed by the ifIndex.  Note that an EFMCu PME port can be
+       stacked below a single PCS port, also indexed by ifIndex,
+       possibly together with other PME ports if PAF is enabled."
+     INDEX  { ifIndex }
+     ::= { efmCuPmeCapabilityTable 1 }
+
+   EfmCuPmeCapabilityEntry ::=
+     SEQUENCE {
+       efmCuPmeSubTypesSupported     BITS
+     }
+
+   efmCuPmeSubTypesSupported  OBJECT-TYPE
+     SYNTAX      BITS {
+       ieee2BaseTLO(0),
+       ieee2BaseTLR(1),
+       ieee10PassTSO(2),
+       ieee10PassTSR(3)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "PME supported subtypes.  This is a bitmap of possible
+       subtypes.  The various bit positions are:
+         ieee2BaseTLO    - PME is capable of operating as 2BaseTL-O
+         ieee2BaseTLR    - PME is capable of operating as 2BaseTL-R
+         ieee10PassTSO   - PME is capable of operating as 10PassTS-O
+         ieee10PassTSR   - PME is capable of operating as 10PassTS-R
+
+       The desired mode of operation is determined by
+       efmCuPmeAdminSubType, while efmCuPmeOperSubType reflects the
+       current operating mode.
+
+       If a Clause 45 MDIO Interface to the PCS is present, then this
+       object combines the 10PASS-TS capable and 2BASE-TL capable
+       bits in the 10P/2B PMA/PMD speed ability register and the
+       CO supported and CPE supported bits in the 10P/2B PMA/PMD
+       status register."
+     REFERENCE
+       "[802.3ah] 61.1, 45.2.1.4.1, 45.2.1.4.2, 45.2.1.12.2,
+       45.2.1.12.3"
+     ::= { efmCuPmeCapabilityEntry 1 }
+
+   efmCuPmeStatusTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPmeStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table provides common status information of EFMCu
+       2BASE-TL/10PASS-TS PME ports.  Status information specific
+       to 10PASS-TS PME is represented in efmCuPme10PStatusTable.
+
+       This table contains live data from the equipment.  As such,
+       it is NOT persistent."
+     ::= { efmCuPme 3 }
+
+   efmCuPmeStatusEntry OBJECT-TYPE
+     SYNTAX      EfmCuPmeStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu PME Status table.
+       Each entry represents common aspects of an EFMCu PME port
+       indexed by the ifIndex.  Note that an EFMCu PME port can be
+       stacked below a single PCS port, also indexed by ifIndex,
+       possibly together with other PME ports if PAF is enabled."
+     INDEX  { ifIndex }
+     ::= { efmCuPmeStatusTable 1 }
+
+   EfmCuPmeStatusEntry ::=
+     SEQUENCE {
+       efmCuPmeOperStatus            INTEGER,
+       efmCuPmeFltStatus             BITS,
+       efmCuPmeOperSubType           INTEGER,
+       efmCuPmeOperProfile           EfmProfileIndexOrZero,
+       efmCuPmeSnrMgn                Integer32,
+       efmCuPmePeerSnrMgn            Integer32,
+       efmCuPmeLineAtn               Integer32,
+       efmCuPmePeerLineAtn           Integer32,
+       efmCuPmeEquivalentLength      Unsigned32,
+       efmCuPmeTCCodingErrors        Counter32,
+       efmCuPmeTCCrcErrors           Counter32
+     }
+
+   efmCuPmeOperStatus  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       up(1),
+       downNotReady(2),
+       downReady(3),
+       init(4)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Current PME link Operational Status.  Possible values are:
+         up(1)           - The link is Up and ready to pass
+                           64/65-octet encoded frames or fragments.
+         downNotReady(2) - The link is Down and the PME does not
+                           detect Handshake tones from its peer.
+                           This value may indicate a possible
+                           problem with the peer PME.
+         downReady(3)    - The link is Down and the PME detects
+                           Handshake tones from its peer.
+         init(4)         - The link is Initializing, as a result of
+                           ifAdminStatus being set to 'up' for a
+                           particular PME or a PCS to which the PME
+                           is connected.
+
+       This object is intended to supplement the Down(2) state of
+       ifOperStatus.
+
+       This object partially maps to the Clause 30 attribute
+       aPMEStatus.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object partially maps to PMA/PMD link status bits in 10P/2B
+       PMA/PMD status register."
+     REFERENCE
+       "[802.3ah] 30.11.2.1.3, 45.2.1.12.4"
+     ::= { efmCuPmeStatusEntry 1 }
+
+   efmCuPmeFltStatus  OBJECT-TYPE
+     SYNTAX      BITS {
+       lossOfFraming(0),
+       snrMgnDefect(1),
+       lineAtnDefect(2),
+       deviceFault(3),
+       configInitFailure(4),
+       protocolInitFailure(5)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Current/Last PME link Fault Status.  This is a bitmap of
+       possible conditions.  The various bit positions are:
+
+         lossOfFraming       - Loss of Framing for 10P or
+                               Loss of Sync word for 2B PMD or
+                               Loss of 64/65-octet framing.
+
+         snrMgnDefect        - SNR margin dropped below the
+                               threshold.
+         lineAtnDefect       - Line Attenuation exceeds the
+                               threshold.
+         deviceFault         - Indicates a vendor-dependent
+                               diagnostic or self-test fault
+                               has been detected.
+         configInitFailure   - Configuration initialization failure,
+                               due to inability of the PME link to
+                               support the configuration profile,
+                               requested during initialization.
+         protocolInitFailure - Protocol initialization failure, due
+                               to an incompatible protocol used by
+                               the peer PME during init (that could
+                               happen if a peer PMD is a regular
+                               G.SDHSL/VDSL modem instead of a
+                               2BASE-TL/10PASS-TS PME).
+
+       This object is intended to supplement ifOperStatus in IF-MIB.
+
+       This object holds information about the last fault.
+       efmCuPmeFltStatus is cleared by the device restart.
+       In addition, lossOfFraming, configInitFailure, and
+       protocolInitFailure are cleared by PME init;
+       deviceFault is cleared by successful diagnostics/test;
+       snrMgnDefect and lineAtnDefect are cleared by SNR margin
+       and Line attenuation, respectively, returning to norm and by
+       PME init.
+
+       This object partially maps to the Clause 30 attribute
+       aPMEStatus.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object consolidates information from various PMA/PMD
+       registers, namely: Fault bit in PMA/PMD status 1 register,
+       10P/2B PMA/PMD link loss register,
+       10P outgoing indicator bits status register,
+       10P incoming indicator bits status register,
+       2B state defects register."
+     REFERENCE
+       "[802.3ah] 30.11.2.1.3, 45.2.1.2.1, 45.2.1.38,
+       45.2.1.39, 45.2.1.54"
+     ::= { efmCuPmeStatusEntry 2 }
+
+   efmCuPmeOperSubType  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       ieee2BaseTLO(1),
+       ieee2BaseTLR(2),
+       ieee10PassTSO(3),
+       ieee10PassTSR(4)
+     }
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Current operational subtype of the PME.
+       Possible values are:
+         ieee2BaseTLO           - PME operates as 2BaseTL-O
+         ieee2BaseTLR           - PME operates as 2BaseTL-R
+         ieee10PassTSO          - PME operates as 10PassTS-O
+         ieee10PassTSR          - PME operates as 10PassTS-R
+
+       The desired operational subtype of the PME can be configured
+       via the efmCuPmeAdminSubType variable.
+
+       If a Clause 45 MDIO Interface to the PMA/PMD is present, then
+       this object combines values of the Port subtype select
+       bits, the PMA/PMD type selection bits in the 10P/2B
+       PMA/PMD control register, and the PMA/PMD link status bits in
+       the 10P/2B PMA/PMD status register."
+     REFERENCE
+       "[802.3ah] 61.1, 45.2.1.11.4, 45.2.1.11.7, 45.2.1.12.4"
+     ::= { efmCuPmeStatusEntry 3 }
+
+   efmCuPmeOperProfile  OBJECT-TYPE
+     SYNTAX      EfmProfileIndexOrZero
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "PME current operating profile.  This object is a pointer to
+       an entry in either the efmCuPme2BProfileTable or the
+       efmCuPme10PProfileTable, depending on the current operating
+       SubType of the PME as indicated by efmCuPmeOperSubType.
+       Note that a profile entry to which efmCuPmeOperProfile is
+       pointing can be created automatically to reflect achieved
+       parameters in adaptive (not fixed) initialization,
+       i.e., values of efmCuPmeOperProfile and efmCuAdminProfile or
+       efmCuPmeAdminProfile may differ.
+       The value of zero indicates that the PME is Down or
+       Initializing.
+
+       This object partially maps to the aOperatingProfile attribute
+       in Clause 30."
+     REFERENCE
+       "[802.3ah] 30.11.2.1.7"
+     ::= { efmCuPmeStatusEntry 4 }
+
+   efmCuPmeSnrMgn OBJECT-TYPE
+     SYNTAX      Integer32(-127..128|65535)
+     UNITS       "dB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The current Signal to Noise Ratio (SNR) margin with respect
+       to the received signal as perceived by the local PME.
+       The value of 65535 is returned when the PME is Down or
+       Initializing.
+
+       This object maps to the aPMESNRMgn attribute in Clause 30.
+
+       If a Clause 45 MDIO Interface is present, then this
+       object maps to the 10P/2B RX SNR margin register."
+     REFERENCE
+       "[802.3ah] 30.11.2.1.4, 45.2.1.16"
+     ::= { efmCuPmeStatusEntry 5 }
+
+   efmCuPmePeerSnrMgn OBJECT-TYPE
+     SYNTAX      Integer32(-127..128|65535)
+     UNITS       "dB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The current SNR margin in dB with respect to the received
+       signal, as perceived by the remote (link partner) PME.
+       The value of 65535 is returned when the PME is Down or
+       Initializing.
+
+       This object is irrelevant for the -R PME subtypes.  The value
+       of 65535 SHALL be returned in this case.
+
+       If a Clause 45 MDIO Interface is present, then this
+       object maps to the 10P/2B link partner RX SNR margin
+       register."
+     REFERENCE
+       "[802.3ah] 45.2.1.17"
+     ::= { efmCuPmeStatusEntry 6}
+
+   efmCuPmeLineAtn OBJECT-TYPE
+     SYNTAX      Integer32(-127..128|65535)
+     UNITS       "dB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The current Line Attenuation in dB as perceived by the local
+       PME.
+
+       The value of 65535 is returned when the PME is Down or
+       Initializing.
+
+       If a Clause 45 MDIO Interface is present, then this
+       object maps to the Line Attenuation register."
+     REFERENCE
+       "[802.3ah] 45.2.1.18"
+     ::= { efmCuPmeStatusEntry 7 }
+
+   efmCuPmePeerLineAtn OBJECT-TYPE
+     SYNTAX      Integer32(-127..128|65535)
+     UNITS       "dB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The current Line Attenuation in dB as perceived by the remote
+       (link partner) PME.
+       The value of 65535 is returned when the PME is Down or
+       Initializing.
+
+       This object is irrelevant for the -R PME subtypes.  The value
+       of 65535 SHALL be returned in this case.
+
+       If a Clause 45 MDIO Interface is present, then this
+       object maps to the 20P/2B link partner Line Attenuation
+       register."
+     REFERENCE
+       "[802.3ah] 45.2.1.19"
+     ::= { efmCuPmeStatusEntry 8 }
+
+   efmCuPmeEquivalentLength  OBJECT-TYPE
+     SYNTAX      Unsigned32(0..8192|65535)
+     UNITS       "m"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "An estimate of the equivalent loop's physical length in
+       meters, as perceived by the PME after the link is established.
+       An equivalent loop is a hypothetical 26AWG (0.4mm) loop with a
+       perfect square root attenuation characteristic, without any
+       bridged taps.
+       The value of 65535 is returned if the link is Down or
+       Initializing or the PME is unable to estimate the equivalent
+       length.
+
+       For a 10BASE-TL PME, if a Clause 45 MDIO Interface to the PME
+       is present, then this object maps to the 10P Electrical Length
+       register."
+     REFERENCE
+       "[802.3ah] 45.2.1.21"
+     ::= { efmCuPmeStatusEntry 9 }
+
+   efmCuPmeTCCodingErrors OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of 64/65-octet encapsulation errors.  This counter
+       is incremented for each 64/65-octet encapsulation error
+       detected by the 64/65-octet receive function.
+
+       This object maps to aTCCodingViolations attribute in
+       Clause 30.
+
+       If a Clause 45 MDIO Interface to the PME TC is present, then
+       this object maps to the TC coding violations register
+       (see 45.2.6.12).
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 61.3.3.1, 30.11.2.1.5, 45.2.6.12"
+     ::= { efmCuPmeStatusEntry 10 }
+
+   efmCuPmeTCCrcErrors OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of TC-CRC errors.  This counter is incremented for
+       each TC-CRC error detected by the 64/65-octet receive function
+       (see 61.3.3.3 and Figure 61-19).
+
+       This object maps to aTCCRCErrors attribute in
+       Clause 30.
+
+       If a Clause 45 MDIO Interface to the PME TC is present, then
+       this object maps to the TC CRC error register
+       (see 45.2.6.11).
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 61.3.3.3, 30.11.2.1.10, 45.2.6.11"
+     ::= { efmCuPmeStatusEntry 11 }
+
+  -- 2BASE-TL specific PME group
+
+   efmCuPme2B      OBJECT IDENTIFIER ::= { efmCuPme 5 }
+
+   efmCuPme2BProfileTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPme2BProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table supports definitions of administrative and
+       operating profiles for 2BASE-TL PMEs.
+       The first 14 entries in this table SHALL always be defined as
+       follows (see 802.3ah Annex 63A):
+       -------+-------+-------+-----+------+-------------+-----------
+       Profile MinRate MaxRate Power Region Constellation Comment
+        index  (Kbps)  (Kbps)  (dBm)
+       -------+-------+-------+-----+------+-------------+-----------
+          1     5696    5696    13.5    1   32-TCPAM      default
+          2     3072    3072    13.5    1   32-TCPAM
+          3     2048    2048    13.5    1   16-TCPAM
+          4     1024    1024    13.5    1   16-TCPAM
+          5      704     704    13.5    1   16-TCPAM
+          6      512     512    13.5    1   16-TCPAM
+          7     5696    5696    14.5    2   32-TCPAM
+          8     3072    3072    14.5    2   32-TCPAM
+          9     2048    2048    14.5    2   16-TCPAM
+         10     1024    1024    13.5    2   16-TCPAM
+         11      704     704    13.5    2   16-TCPAM
+         12      512     512    13.5    2   16-TCPAM
+         13      192    5696       0    1   0             best effort
+         14      192    5696       0    2   0             best effort
+       -------+-------+-------+-----+------+-------------+-----------
+
+       These default entries SHALL be created during agent
+       initialization and MUST NOT be deleted.
+
+       Entries following the first 14 can be dynamically created and
+       deleted to provide custom administrative (configuration)
+       profiles and automatic operating profiles.
+
+       This table MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] Annex 63A, 30.11.2.1.6"
+     ::= { efmCuPme2B  2 }
+
+   efmCuPme2BProfileEntry OBJECT-TYPE
+     SYNTAX      EfmCuPme2BProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Each entry corresponds to a single 2BASE-TL PME profile.
+       Each profile contains a set of parameters, used either for
+       configuration or representation of a 2BASE-TL PME.
+       In case a particular profile is referenced via the
+       efmCuPmeAdminProfile object (or efmCuAdminProfile if
+       efmCuPmeAdminProfile is zero), it represents the desired
+       parameters for the 2BaseTL-O PME initialization.
+       If a profile is referenced via an efmCuPmeOperProfile object,
+       it represents the current operating parameters of an
+       operational PME.
+
+       Profiles may be created/deleted using the row creation/
+       deletion mechanism via efmCuPme2BProfileRowStatus.  If an
+       active entry is referenced, the entry MUST remain 'active'
+       until all references are removed.
+       Default entries MUST NOT be removed."
+     INDEX { efmCuPme2BProfileIndex }
+     ::= { efmCuPme2BProfileTable 1 }
+
+   EfmCuPme2BProfileEntry ::=
+     SEQUENCE {
+       efmCuPme2BProfileIndex           EfmProfileIndex,
+       efmCuPme2BProfileDescr           SnmpAdminString,
+       efmCuPme2BRegion                 INTEGER,
+       efmCuPme2BsMode                  EfmProfileIndexOrZero,
+       efmCuPme2BMinDataRate            Unsigned32,
+       efmCuPme2BMaxDataRate            Unsigned32,
+       efmCuPme2BPower                  Unsigned32,
+       efmCuPme2BConstellation          INTEGER,
+       efmCuPme2BProfileRowStatus       RowStatus
+     }
+
+   efmCuPme2BProfileIndex OBJECT-TYPE
+     SYNTAX      EfmProfileIndex
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "2BASE-TL PME profile index.
+       This object is the unique index associated with this profile.
+       Entries in this table are referenced via efmCuAdminProfile or
+       efmCuPmeAdminProfile objects."
+     ::= { efmCuPme2BProfileEntry 1 }
+
+   efmCuPme2BProfileDescr OBJECT-TYPE
+     SYNTAX      SnmpAdminString
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "A textual string containing information about a 2BASE-TL PME
+       profile.  The string may include information about the data
+       rate and spectral limitations of this particular profile."
+     ::= { efmCuPme2BProfileEntry 2 }
+
+   efmCuPme2BRegion  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       region1(1),
+       region2(2)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Regional settings for a 2BASE-TL PME, as specified in the
+       relevant Regional Annex of [G.991.2].
+       Regional settings specify the Power Spectral Density (PSD)
+       mask and the Power Back-Off (PBO) values, and place
+       limitations on the max allowed data rate, power, and
+       constellation.
+
+       Possible values for this object are:
+         region1      - Annexes A and F (e.g., North America)
+         region2      - Annexes B and G (e.g., Europe)
+
+       Annex A/B specify regional settings for data rates 192-2304
+       Kbps using 16-TCPAM encoding.
+       Annex F/G specify regional settings for rates 2320-3840 Kbps
+       using 16-TCPAM encoding and 768-5696 Kbps using 32-TCPAM
+       encoding.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object partially maps to the Region bits in the 2B general
+       parameter register."
+     REFERENCE
+       "[802.3ah] 45.2.1.42; [G.991.2] Annexes A, B, F and G"
+     ::= { efmCuPme2BProfileEntry 3 }
+
+   efmCuPme2BsMode  OBJECT-TYPE
+     SYNTAX      EfmProfileIndexOrZero
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Desired custom Spectral Mode for a 2BASE-TL PME.  This object
+
+       is a pointer to an entry in efmCuPme2BsModeTable and a block
+       of entries in efmCuPme2BRateReachTable, which together define
+       (country-specific) reach-dependent rate limitations in
+       addition to those defined by efmCuPme2BRegion.
+
+       The value of this object is the index of the referenced
+       spectral mode.
+       The value of zero (default) indicates that no specific
+       spectral mode is applicable.
+
+       Attempts to set this object to a value that is not the value
+       of the index for an active entry in the corresponding spectral
+       mode table MUST be rejected."
+     REFERENCE
+       "efmCuPme2BsModeTable, efmCuPme2BRateReachTable"
+     DEFVAL { 0 }
+     ::= { efmCuPme2BProfileEntry 4 }
+
+   efmCuPme2BMinDataRate  OBJECT-TYPE
+     SYNTAX  Unsigned32(192..5696)
+     UNITS       "Kbps"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Minimum Data Rate for the 2BASE-TL PME.
+       This object can take values of (n x 64)Kbps,
+       where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
+
+       The data rate of the 2BASE-TL PME is considered 'fixed' when
+       the value of this object equals that of efmCuPme2BMaxDataRate.
+       If efmCuPme2BMinDataRate is less than efmCuPme2BMaxDataRate in
+       the administrative profile, the data rate is considered
+       'adaptive', and SHALL be set to the maximum attainable rate
+       not exceeding efmCuPme2BMaxDataRate, under the spectral
+       limitations placed by the efmCuPme2BRegion and
+       efmCuPme2BsMode.
+
+       Note that the current operational data rate of the PME is
+       represented by the ifSpeed object of IF-MIB.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object maps to the Min Data Rate1 bits in the 2B PMD
+       parameters register.
+
+       This object MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] 45.2.1.43"
+     ::= { efmCuPme2BProfileEntry 5 }
+
+   efmCuPme2BMaxDataRate  OBJECT-TYPE
+     SYNTAX  Unsigned32(192..5696)
+     UNITS       "Kbps"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Maximum Data Rate for the 2BASE-TL PME.
+       This object can take values of (n x 64)Kbps,
+       where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
+
+       The data rate of the 2BASE-TL PME is considered 'fixed' when
+       the value of this object equals that of efmCuPme2BMinDataRate.
+       If efmCuPme2BMinDataRate is less than efmCuPme2BMaxDataRate in
+       the administrative profile, the data rate is considered
+       'adaptive', and SHALL be set to the maximum attainable rate
+       not exceeding efmCuPme2BMaxDataRate, under the spectral
+       limitations placed by the efmCuPme2BRegion and
+       efmCuPme2BsMode.
+
+       Note that the current operational data rate of the PME is
+       represented by the ifSpeed object of IF-MIB.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object maps to the Max Data Rate1 bits in the 2B PMD
+       parameters register.
+
+       This object MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] 45.2.1.43"
+     ::= { efmCuPme2BProfileEntry 6 }
+
+   efmCuPme2BPower  OBJECT-TYPE
+     SYNTAX      Unsigned32(0|10..42)
+     UNITS       "0.5 dBm"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Signal Transmit Power.  Multiple of 0.5 dBm.
+       The value of 0 in the administrative profile means that the
+       signal transmit power is not fixed and SHALL be set to
+       maximize the attainable rate, under the spectral limitations
+       placed by the efmCuPme2BRegion and efmCuPme2BsMode.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object maps to the Power1 bits in the 2B PMD parameters
+       register."
+     REFERENCE
+       "[802.3ah] 45.2.1.43"
+     ::= { efmCuPme2BProfileEntry 7 }
+
+   efmCuPme2BConstellation  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       adaptive(0),
+       tcpam16(1),
+       tcpam32(2)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "TCPAM Constellation of the 2BASE-TL PME.
+       The possible values are:
+         adaptive(0)    - either 16- or 32-TCPAM
+         tcpam16(1)     - 16-TCPAM
+         tcpam32(2)     - 32-TCPAM
+
+       The value of adaptive(0) in the administrative profile means
+       that the constellation is not fixed and SHALL be set to
+       maximize the attainable rate, under the spectral limitations
+       placed by the efmCuPme2BRegion and efmCuPme2BsMode.
+
+       If a Clause 45 MDIO Interface to the PME is present, then this
+       object maps to the Constellation1 bits in the 2B general
+       parameter register."
+     REFERENCE
+        "[802.3ah] 45.2.1.43"
+     ::= { efmCuPme2BProfileEntry 8 }
+
+   efmCuPme2BProfileRowStatus OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "This object controls the creation, modification, or deletion
+       of the associated entry in the efmCuPme2BProfileTable per the
+       semantics of RowStatus.
+
+       If an 'active' entry is referenced via efmCuAdminProfile or
+       efmCuPmeAdminProfile instance(s), the entry MUST remain
+       'active'.
+
+       An 'active' entry SHALL NOT be modified.  In order to modify
+       an existing entry, it MUST be taken out of service (by setting
+       this object to 'notInService'), modified, and set 'active'
+       again."
+     ::= { efmCuPme2BProfileEntry 9 }
+
+   efmCuPme2BsModeTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPme2BsModeEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table, together with efmCu2BReachRateTable, supports
+       definition of administrative custom spectral modes for
+       2BASE-TL PMEs, describing spectral limitations in addition to
+       those specified by efmCuPme2BRegion.
+
+       In some countries, spectral regulations (e.g., UK ANFP) limit
+       the length of the loops for certain data rates.  This table
+       allows these country-specific limitations to be specified.
+
+       Entries in this table referenced by the efmCuPme2BsMode
+       MUST NOT be deleted until all the active references are
+       removed.
+
+       This table MUST be maintained in a persistent manner."
+     REFERENCE
+       "efmCu2BReachRateTable"
+     ::= { efmCuPme2B  3 }
+
+   efmCuPme2BsModeEntry OBJECT-TYPE
+     SYNTAX      EfmCuPme2BsModeEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Each entry specifies a spectral mode description and its
+       index, which is used to reference corresponding entries in the
+       efmCu2BReachRateTable.
+
+       Entries may be created/deleted using the row creation/
+       deletion mechanism via efmCuPme2BsModeRowStatus."
+     INDEX { efmCuPme2BsModeIndex }
+     ::= { efmCuPme2BsModeTable 1 }
+
+   EfmCuPme2BsModeEntry ::=
+     SEQUENCE {
+       efmCuPme2BsModeIndex             EfmProfileIndex,
+       efmCuPme2BsModeDescr             SnmpAdminString,
+       efmCuPme2BsModeRowStatus         RowStatus
+     }
+
+   efmCuPme2BsModeIndex OBJECT-TYPE
+     SYNTAX      EfmProfileIndex
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "2BASE-TL PME Spectral Mode index.
+       This object is the unique index associated with this spectral
+       mode.
+       Entries in this table are referenced via the efmCuPme2BsMode
+       object."
+     ::= { efmCuPme2BsModeEntry 1 }
+
+   efmCuPme2BsModeDescr OBJECT-TYPE
+     SYNTAX      SnmpAdminString
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "A textual string containing information about a 2BASE-TL PME
+       spectral mode.  The string may include information about
+       corresponding (country-specific) spectral regulations
+       and rate/reach limitations of this particular spectral mode."
+     ::= { efmCuPme2BsModeEntry 2 }
+
+   efmCuPme2BsModeRowStatus OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "This object controls creation, modification, or deletion of
+       the associated entry in efmCuPme2BsModeTable per the semantics
+       of RowStatus.
+
+       If an 'active' entry is referenced via efmCuPme2BsMode
+       instance(s), the entry MUST remain 'active'.
+
+       An 'active' entry SHALL NOT be modified.  In order to modify
+       an existing entry, it MUST be taken out of service (by setting
+       this object to 'notInService'), modified, and set 'active'
+       again."
+     ::= { efmCuPme2BsModeEntry 3 }
+
+   efmCuPme2BReachRateTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPme2BReachRateEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table supports the definition of administrative custom
+       spectral modes for 2BASE-TL PMEs, providing spectral
+       limitations in addition to those specified by
+       efmCuPme2BRegion.
+
+       The spectral regulations in some countries (e.g., UK ANFP)
+       limit the length of the loops for certain data rates.
+       This table allows these country-specific limitations to be
+       specified.
+
+       Below is an example of this table for [ANFP]:
+       ----------+-------+-------
+       Equivalent MaxRate MaxRate
+         Length    PAM16   PAM32
+           (m)     (Kbps)  (Kbps)
+       ----------+-------+-------
+           975      2304    5696
+          1125      2304    5504
+          1275      2304    5120
+          1350      2304    4864
+          1425      2304    4544
+          1500      2304    4288
+          1575      2304    3968
+          1650      2304    3776
+          1725      2304    3520
+          1800      2304    3264
+          1875      2304    3072
+          1950      2048    2688
+          2100      1792    2368
+          2250      1536       0
+          2400      1408       0
+          2550      1280       0
+          2775      1152       0
+          2925      1152       0
+          3150      1088       0
+          3375      1024       0
+       ----------+-------+-------
+
+       Entries in this table referenced by an efmCuPme2BsMode
+       instance MUST NOT be deleted.
+
+       This table MUST be maintained in a persistent manner."
+     REFERENCE
+       "[ANFP]"
+     ::= { efmCuPme2B  4 }
+
+   efmCuPme2BReachRateEntry OBJECT-TYPE
+     SYNTAX      EfmCuPme2BReachRateEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Each entry specifies maximum 2BASE-TL PME data rates
+       allowed for a certain equivalent loop length, when using
+
+       16-TCPAM or 32-TCPAM encoding.
+
+       When a 2BASE-TL PME is initialized, its data rate MUST NOT
+       exceed one of the following limitations:
+       - the value of efmCuPme2BMaxDataRate
+       - maximum data rate allowed by efmCuPme2BRegion and
+         efmCuPme2BPower
+       - maximum data rate for a given encoding specified in the
+         efmCuPme2BsModeEntry, corresponding to the equivalent loop
+         length, estimated by the PME
+
+       It is RECOMMENDED that the efmCuPme2BEquivalentLength values
+       are assigned in increasing order, starting from the minimum
+       value.
+
+       Entries may be created/deleted using the row creation/
+       deletion mechanism via efmCuPme2ReachRateRowStatus."
+     INDEX { efmCuPme2BsModeIndex, efmCuPme2BReachRateIndex }
+     ::= { efmCuPme2BReachRateTable 1 }
+
+   EfmCuPme2BReachRateEntry ::=
+     SEQUENCE {
+       efmCuPme2BReachRateIndex         EfmProfileIndex,
+       efmCuPme2BEquivalentLength       Unsigned32,
+       efmCuPme2BMaxDataRatePam16       Unsigned32,
+       efmCuPme2BMaxDataRatePam32       Unsigned32,
+       efmCuPme2BReachRateRowStatus     RowStatus
+     }
+
+   efmCuPme2BReachRateIndex OBJECT-TYPE
+     SYNTAX      EfmProfileIndex
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "2BASE-TL custom spectral mode Reach-Rate table index.
+       This object is the unique index associated with each entry."
+     ::= { efmCuPme2BReachRateEntry 1 }
+
+   efmCuPme2BEquivalentLength  OBJECT-TYPE
+     SYNTAX      Unsigned32(0..8192)
+     UNITS       "m"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Maximum allowed equivalent loop's physical length in meters
+       for the specified data rates.
+       An equivalent loop is a hypothetical 26AWG (0.4mm) loop with a
+       perfect square root attenuation characteristic, without any
+
+       bridged taps."
+     ::= { efmCuPme2BReachRateEntry 2 }
+
+   efmCuPme2BMaxDataRatePam16  OBJECT-TYPE
+     SYNTAX      Unsigned32(0|192..5696)
+     UNITS       "Kbps"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Maximum data rate for a 2BASE-TL PME at the specified
+       equivalent loop's length using TC-PAM16 encoding.
+       The value of zero means that TC-PAM16 encoding should not be
+       used at this distance."
+     ::= { efmCuPme2BReachRateEntry 3 }
+
+   efmCuPme2BMaxDataRatePam32  OBJECT-TYPE
+     SYNTAX      Unsigned32(0|192..5696)
+     UNITS       "Kbps"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "Maximum data rate for a 2BASE-TL PME at the specified
+       equivalent loop's length using TC-PAM32 encoding.
+       The value of zero means that TC-PAM32 encoding should not be
+       used at this distance."
+     ::= { efmCuPme2BReachRateEntry 4 }
+
+   efmCuPme2BReachRateRowStatus OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "This object controls the creation, modification, or deletion
+       of the associated entry in the efmCuPme2BReachRateTable per
+       the semantics of RowStatus.
+
+       If an 'active' entry is referenced via efmCuPme2BsMode
+       instance(s), the entry MUST remain 'active'.
+
+       An 'active' entry SHALL NOT be modified.  In order to modify
+       an existing entry, it MUST be taken out of service (by setting
+       this object to 'notInService'), modified, and set 'active'
+       again."
+     ::= { efmCuPme2BReachRateEntry 5 }
+
+  -- 10PASS-TS specific PME group
+
+   efmCuPme10P      OBJECT IDENTIFIER ::= { efmCuPme 6 }
+
+   efmCuPme10PProfileTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPme10PProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table supports definitions of configuration profiles for
+       10PASS-TS PMEs.
+       The first 22 entries in this table SHALL always be defined as
+       follows (see 802.3ah Annex 62B.3, table 62B-1):
+       -------+--------+----+---------+-----+-----+---------------
+       Profile Bandplan UPBO BandNotch DRate URate Comment
+        Index  PSDMask#  p#    p#        p#    p#
+       -------+--------+----+---------+-----+-----+---------------
+          1      1      3    2,6,10,11    20    20 default profile
+          2     13      5    0            20    20
+          3      1      1    0            20    20
+          4     16      0    0           100   100
+          5     16      0    0            70    50
+          6      6      0    0            50    10
+          7     17      0    0            30    30
+          8      8      0    0            30     5
+          9      4      0    0            25    25
+         10      4      0    0            15    15
+         11     23      0    0            10    10
+         12     23      0    0             5     5
+         13     16      0    2,5,9,11    100   100
+         14     16      0    2,5,9,11     70    50
+         15      6      0    2,6,10,11    50    10
+         16     17      0    2,5,9,11     30    30
+         17      8      0    2,6,10,11    30     5
+         18      4      0    2,6,10,11    25    25
+         19      4      0    2,6,10,11    15    15
+         20     23      0    2,5,9,11     10    10
+         21     23      0    2,5,9,11      5     5
+         22     30      0    0           200    50
+       -------+--------+----+---------+-----+-----+---------------
+
+       These default entries SHALL be created during agent
+       initialization and MUST NOT be deleted.
+
+       Entries following the first 22 can be dynamically created and
+       deleted to provide custom administrative (configuration)
+       profiles and automatic operating profiles.
+
+       This table MUST be maintained in a persistent manner."
+     REFERENCE
+       "[802.3ah] Annex 62B.3, 30.11.2.1.6"
+     ::= { efmCuPme10P  1 }
+
+   efmCuPme10PProfileEntry OBJECT-TYPE
+     SYNTAX      EfmCuPme10PProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Each entry corresponds to a single 10PASS-TS PME profile.
+
+       Each profile contains a set of parameters, used either for
+       configuration or representation of a 10PASS-TS PME.
+       In case a particular profile is referenced via the
+       efmCuPmeAdminProfile object (or efmCuAdminProfile if
+       efmCuPmeAdminProfile is zero), it represents the desired
+       parameters for the 10PassTS-O PME initialization.
+       If a profile is referenced via an efmCuPmeOperProfile object,
+       it represents the current operating parameters of the PME.
+
+       Profiles may be created/deleted using the row creation/
+       deletion mechanism via efmCuPme10PProfileRowStatus.  If an
+       'active' entry is referenced, the entry MUST remain 'active'
+       until all references are removed.
+       Default entries MUST NOT be removed."
+     INDEX { efmCuPme10PProfileIndex }
+     ::= { efmCuPme10PProfileTable 1 }
+
+   EfmCuPme10PProfileEntry ::=
+     SEQUENCE {
+       efmCuPme10PProfileIndex           EfmProfileIndex,
+       efmCuPme10PProfileDescr           SnmpAdminString,
+       efmCuPme10PBandplanPSDMskProfile  INTEGER,
+       efmCuPme10PUPBOReferenceProfile   INTEGER,
+       efmCuPme10PBandNotchProfiles      BITS,
+       efmCuPme10PPayloadDRateProfile    INTEGER,
+       efmCuPme10PPayloadURateProfile    INTEGER,
+       efmCuPme10PProfileRowStatus       RowStatus
+     }
+
+   efmCuPme10PProfileIndex OBJECT-TYPE
+     SYNTAX      EfmProfileIndex
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "10PASS-TS PME profile index.
+       This object is the unique index associated with this profile.
+       Entries in this table are referenced via efmCuAdminProfile or
+       efmCuPmeAdminProfile."
+     ::= { efmCuPme10PProfileEntry 1 }
+
+   efmCuPme10PProfileDescr OBJECT-TYPE
+     SYNTAX      SnmpAdminString
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "A textual string containing information about a 10PASS-TS PME
+       profile.  The string may include information about data rate
+       and spectral limitations of this particular profile."
+     ::= { efmCuPme10PProfileEntry 2 }
+
+   efmCuPme10PBandplanPSDMskProfile  OBJECT-TYPE
+     SYNTAX  INTEGER {
+       profile1(1),
+       profile2(2),
+       profile3(3),
+       profile4(4),
+       profile5(5),
+       profile6(6),
+       profile7(7),
+       profile8(8),
+       profile9(9),
+       profile10(10),
+       profile11(11),
+       profile12(12),
+       profile13(13),
+       profile14(14),
+       profile15(15),
+       profile16(16),
+       profile17(17),
+       profile18(18),
+       profile19(19),
+       profile20(20),
+       profile21(21),
+       profile22(22),
+       profile23(23),
+       profile24(24),
+       profile25(25),
+       profile26(26),
+       profile27(27),
+       profile28(28),
+       profile29(29),
+       profile30(30)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "The 10PASS-TS PME Bandplan and PSD Mask Profile, as specified
+       in 802.3ah Annex 62A, table 62A-1.  Possible values are:
+       --------------+------------------------+------------+--------
+       Profile Name    PSD Mask                  Bands      G.993.1
+                                               0/1/2/3/4/5  Bandplan
+       --------------+------------------------+------------+--------
+       profile1(1)    T1.424 FTTCab.M1         x/D/U/D/U    A
+       profile2(2)    T1.424 FTTEx.M1          x/D/U/D/U    A
+       profile3(3)    T1.424 FTTCab.M2         x/D/U/D/U    A
+       profile4(4)    T1.424 FTTEx.M2          x/D/U/D/U    A
+       profile5(5)    T1.424 FTTCab.M1         D/D/U/D/U    A
+       profile6(6)    T1.424 FTTEx.M1          D/D/U/D/U    A
+       profile7(7)    T1.424 FTTCab.M2         D/D/U/D/U    A
+       profile8(8)    T1.424 FTTEx.M2          D/D/U/D/U    A
+       profile9(9)    T1.424 FTTCab.M1         U/D/U/D/x    A
+       profile10(10)  T1.424 FTTEx.M1          U/D/U/D/x    A
+       profile11(11)  T1.424 FTTCab.M2         U/D/U/D/x    A
+       profile12(12)  T1.424 FTTEx.M2          U/D/U/D/x    A
+       profile13(13)  TS 101 270-1 Pcab.M1.A   x/D/U/D/U    B
+       profile14(14)  TS 101 270-1 Pcab.M1.B   x/D/U/D/U    B
+       profile15(15)  TS 101 270-1 Pex.P1.M1   x/D/U/D/U    B
+       profile16(16)  TS 101 270-1 Pex.P2.M1   x/D/U/D/U    B
+       profile17(17)  TS 101 270-1 Pcab.M2     x/D/U/D/U    B
+       profile18(18)  TS 101 270-1 Pex.P1.M2   x/D/U/D/U    B
+       profile19(19)  TS 101 270-1 Pex.P2.M2   x/D/U/D/U    B
+       profile20(20)  TS 101 270-1 Pcab.M1.A   U/D/U/D/x    B
+       profile21(21)  TS 101 270-1 Pcab.M1.B   U/D/U/D/x    B
+       profile22(22)  TS 101 270-1 Pex.P1.M1   U/D/U/D/x    B
+       profile23(23)  TS 101 270-1 Pex.P2.M1   U/D/U/D/x    B
+       profile24(24)  TS 101 270-1 Pcab.M2     U/D/U/D/x    B
+       profile25(25)  TS 101 270-1 Pex.P1.M2   U/D/U/D/x    B
+       profile26(26)  TS 101 270-1 Pex.P2.M2   U/D/U/D/x    B
+       profile27(27)  G.993.1 F.1.2.1          x/D/U/D/U    Annex F
+       profile28(28)  G.993.1 F.1.2.2          x/D/U/D/U    Annex F
+       profile29(29)  G.993.1 F.1.2.3          x/D/U/D/U    Annex F
+       profile30(30)  T1.424 FTTCab.M1 (ext.)  x/D/U/D/U/D  Annex A
+       --------------+------------------------+------------+--------
+       "
+     REFERENCE
+       "[802.3ah] Annex 62A"
+     ::= { efmCuPme10PProfileEntry 3 }
+
+   efmCuPme10PUPBOReferenceProfile  OBJECT-TYPE
+     SYNTAX  INTEGER {
+       profile0(0),
+       profile1(1),
+       profile2(2),
+       profile3(3),
+       profile4(4),
+       profile5(5),
+       profile6(6),
+       profile7(7),
+       profile8(8),
+       profile9(9)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "The 10PASS-TS PME Upstream Power Back-Off (UPBO) Reference
+       PSD Profile, as specified in 802.3 Annex 62A, table 62A-3.
+       Possible values are:
+       ------------+-----------------------------
+       Profile Name   Reference PSD
+       ------------+-----------------------------
+       profile0(0)  no profile
+       profile1(1)  T1.424        Noise A    M1
+       profile2(2)  T1.424        Noise A    M2
+       profile3(3)  T1.424        Noise F    M1
+       profile4(4)  T1.424        Noise F    M2
+       profile5(5)  TS 101 270-1  Noise A&B
+       profile6(6)  TS 101 270-1  Noise C
+       profile7(7)  TS 101 270-1  Noise D
+       profile8(8)  TS 101 270-1  Noise E
+       profile9(9)  TS 101 270-1  Noise F
+       ------------+-----------------------------
+       "
+     REFERENCE
+       "[802.3ah] Annex 62A.3.5"
+     ::= { efmCuPme10PProfileEntry 4 }
+
+   efmCuPme10PBandNotchProfiles  OBJECT-TYPE
+     SYNTAX  BITS {
+       profile0(0),
+       profile1(1),
+       profile2(2),
+       profile3(3),
+       profile4(4),
+       profile5(5),
+       profile6(6),
+       profile7(7),
+       profile8(8),
+       profile9(9),
+       profile10(10),
+       profile11(11)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "The 10PASS-TS PME Egress Control Band Notch Profile bitmap,
+       as specified in 802.3 Annex 62A, table 62A-4.  Possible values
+       are:
+       --------------+--------+------+------------+------+------
+       Profile Name   G.991.3  T1.424 TS 101 270-1 StartF EndF
+                      table    table  table        (MHz)  (MHz)
+       --------------+--------+------+------------+------+------
+       profile0(0)    no profile
+       profile1(1)    F-5 #01  -      -            1.810  1.825
+       profile2(2)    6-2      15-1   17           1.810  2.000
+       profile3(3)    F-5 #02  -      -            1.907  1.912
+       profile4(4)    F-5 #03  -      -            3.500  3.575
+       profile5(5)    6-2      -      17           3.500  3.800
+       profile6(6)    -        15-1   -            3.500  4.000
+       profile7(7)    F-5 #04  -      -            3.747  3.754
+       profile8(8)    F-5 #05  -      -            3.791  3.805
+       profile9(9)    6-2      -      17           7.000  7.100
+       profile10(10)  F-5 #06  15-1   -            7.000  7.300
+       profile11(11)  6-2      15-1   1            10.100 10.150
+       --------------+--------+------+------------+------+------
+
+       Any combination of profiles can be specified by ORing
+       individual profiles, for example, a value of 0x2230 selects
+       profiles 2, 6, 10, and 11."
+     REFERENCE
+       "[802.3ah] Annex 62A.3.5"
+     ::= { efmCuPme10PProfileEntry 5 }
+
+   efmCuPme10PPayloadDRateProfile  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       profile5(5),
+       profile10(10),
+       profile15(15),
+       profile20(20),
+       profile25(25),
+       profile30(30),
+       profile50(50),
+       profile70(70),
+       profile100(100),
+       profile140(140),
+       profile200(200)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "The 10PASS-TS PME Downstream Payload Rate Profile, as
+
+       specified in 802.3 Annex 62A.  Possible values are:
+         profile5(5)      - 2.5 Mbps
+         profile10(10)    - 5 Mbps
+         profile15(15)    - 7.5 Mbps
+         profile20(20)    - 10 Mbps
+         profile25(25)    - 12.5 Mbps
+         profile30(30)    - 15 Mbps
+         profile50(50)    - 25 Mbps
+         profile70(70)    - 35 Mbps
+         profile100(100)  - 50 Mbps
+         profile140(140)  - 70 Mbps
+         profile200(200)  - 100 Mbps
+
+       Each value represents a target for the PME's Downstream
+       Payload Bitrate as seen at the MII.  If the payload rate of
+       the selected profile cannot be achieved based on the loop
+       environment, bandplan, and PSD mask, the PME initialization
+       SHALL fail."
+     REFERENCE
+       "[802.3ah] Annex 62A.3.6"
+     ::= { efmCuPme10PProfileEntry 6 }
+
+   efmCuPme10PPayloadURateProfile  OBJECT-TYPE
+     SYNTAX      INTEGER {
+       profile5(5),
+       profile10(10),
+       profile15(15),
+       profile20(20),
+       profile25(25),
+       profile30(30),
+       profile50(50),
+       profile70(70),
+       profile100(100)
+     }
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "The 10PASS-TS PME Upstream Payload Rate Profile, as specified
+        in 802.3 Annex 62A.  Possible values are:
+         profile5(5)       - 2.5 Mbps
+         profile10(10)     - 5 Mbps
+         profile15(15)     - 7.5 Mbps
+         profile20(20)     - 10 Mbps
+         profile25(25)     - 12.5 Mbps
+         profile30(30)     - 15 Mbps
+         profile50(50)     - 25 Mbps
+         profile70(70)     - 35 Mbps
+         profile100(100)   - 50 Mbps
+
+       Each value represents a target for the PME's Upstream Payload
+       Bitrate as seen at the MII.  If the payload rate of the
+       selected profile cannot be achieved based on the loop
+       environment, bandplan, and PSD mask, the PME initialization
+       SHALL fail."
+     REFERENCE
+       "[802.3ah] Annex 62A.3.6"
+     ::= { efmCuPme10PProfileEntry 7 }
+
+   efmCuPme10PProfileRowStatus OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+       "This object controls creation, modification, or deletion of
+       the associated entry in efmCuPme10PProfileTable per the
+       semantics of RowStatus.
+
+       If an active entry is referenced via efmCuAdminProfile or
+       efmCuPmeAdminProfile, the entry MUST remain 'active' until
+       all references are removed.
+
+       An 'active' entry SHALL NOT be modified.  In order to modify
+       an existing entry, it MUST be taken out of service (by setting
+       this object to 'notInService'), modified, and set 'active'
+       again."
+     ::= { efmCuPme10PProfileEntry 8 }
+
+   efmCuPme10PStatusTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF EfmCuPme10PStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table provides status information of EFMCu 10PASS-TS
+       PMEs (modems).
+
+       This table contains live data from the equipment.  As such,
+       it is NOT persistent."
+     ::= { efmCuPme10P 2 }
+
+   efmCuPme10PStatusEntry OBJECT-TYPE
+     SYNTAX      EfmCuPme10PStatusEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "An entry in the EFMCu 10PASS-TS PME Status table."
+     INDEX  { ifIndex }
+     ::= { efmCuPme10PStatusTable 1 }
+
+   EfmCuPme10PStatusEntry ::=
+     SEQUENCE {
+       efmCuPme10PFECCorrectedBlocks     Counter32,
+       efmCuPme10PFECUncorrectedBlocks   Counter32
+     }
+
+   efmCuPme10PFECCorrectedBlocks  OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of received and corrected Forward Error Correction
+       (FEC) codewords in this 10PASS-TS PME.
+
+       This object maps to the aPMEFECCorrectedBlocks attribute in
+       Clause 30.
+
+       If a Clause 45 MDIO Interface to the PMA/PMD is present,
+       then this object maps to the 10P FEC correctable errors
+       register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.1.22, 30.11.2.1.8"
+     ::= { efmCuPme10PStatusEntry 1 }
+
+   efmCuPme10PFECUncorrectedBlocks  OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of received uncorrectable FEC codewords in this
+       10PASS-TS PME.
+
+       This object maps to the aPMEFECUncorrectableBlocks attribute
+       in Clause 30.
+
+       If a Clause 45 MDIO Interface to the PMA/PMD is present,
+       then this object maps to the 10P FEC uncorrectable errors
+       register.
+
+       Discontinuities in the value of this counter can occur at
+       re-initialization of the management system, and at other times
+
+       as indicated by the value of ifCounterDiscontinuityTime,
+       defined in IF-MIB."
+     REFERENCE
+       "[802.3ah] 45.2.1.23, 30.11.2.1.9"
+     ::= { efmCuPme10PStatusEntry 2 }
+
+  --
+  -- Conformance Statements
+  --
+
+   efmCuGroups      OBJECT IDENTIFIER ::= { efmCuConformance 1 }
+
+   efmCuCompliances OBJECT IDENTIFIER ::= { efmCuConformance 2 }
+
+   -- Object Groups
+
+   efmCuBasicGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPAFSupported,
+       efmCuAdminProfile,
+       efmCuTargetDataRate,
+       efmCuTargetSnrMgn,
+       efmCuAdaptiveSpectra,
+       efmCuPortSide,
+       efmCuFltStatus
+     }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects representing management information
+       common for all types of EFMCu ports."
+     ::= { efmCuGroups 1 }
+
+   efmCuPAFGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPeerPAFSupported,
+       efmCuPAFCapacity,
+       efmCuPeerPAFCapacity,
+       efmCuPAFAdminState,
+       efmCuPAFDiscoveryCode,
+       efmCuPAFRemoteDiscoveryCode,
+       efmCuNumPMEs
+     }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects supporting OPTIONAL PME
+       Aggregation Function (PAF) and PAF discovery in EFMCu ports."
+     ::= { efmCuGroups 2 }
+
+   efmCuPAFErrorsGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPAFInErrors,
+       efmCuPAFInSmallFragments,
+       efmCuPAFInLargeFragments,
+       efmCuPAFInBadFragments,
+       efmCuPAFInLostFragments,
+       efmCuPAFInLostStarts,
+       efmCuPAFInLostEnds,
+       efmCuPAFInOverflows
+     }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects supporting OPTIONAL error counters
+       of PAF on EFMCu ports."
+     ::= { efmCuGroups 3 }
+
+   efmCuPmeGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPmeAdminProfile,
+       efmCuPmeOperStatus,
+       efmCuPmeFltStatus,
+       efmCuPmeSubTypesSupported,
+       efmCuPmeAdminSubType,
+       efmCuPmeOperSubType,
+       efmCuPAFRemoteDiscoveryCode,
+       efmCuPmeOperProfile,
+       efmCuPmeSnrMgn,
+       efmCuPmePeerSnrMgn,
+       efmCuPmeLineAtn,
+       efmCuPmePeerLineAtn,
+       efmCuPmeEquivalentLength,
+       efmCuPmeTCCodingErrors,
+       efmCuPmeTCCrcErrors,
+       efmCuPmeThreshLineAtn,
+       efmCuPmeThreshSnrMgn
+     }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects providing information about
+       a 2BASE-TL/10PASS-TS PME."
+     ::= { efmCuGroups 4 }
+
+   efmCuAlarmConfGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuThreshLowRate,
+       efmCuLowRateCrossingEnable,
+       efmCuPmeThreshLineAtn,
+       efmCuPmeLineAtnCrossingEnable,
+       efmCuPmeThreshSnrMgn,
+       efmCuPmeSnrMgnCrossingEnable,
+       efmCuPmeDeviceFaultEnable,
+       efmCuPmeConfigInitFailEnable,
+       efmCuPmeProtocolInitFailEnable
+     }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects supporting configuration of alarm
+       thresholds and notifications in EFMCu ports."
+     ::= { efmCuGroups 5 }
+
+   efmCuNotificationGroup NOTIFICATION-GROUP
+     NOTIFICATIONS {
+       efmCuLowRateCrossing,
+       efmCuPmeLineAtnCrossing,
+       efmCuPmeSnrMgnCrossing,
+       efmCuPmeDeviceFault,
+       efmCuPmeConfigInitFailure,
+       efmCuPmeProtocolInitFailure
+     }
+     STATUS      current
+     DESCRIPTION
+       "This group supports notifications of significant conditions
+       associated with EFMCu ports."
+     ::= { efmCuGroups 6 }
+
+   efmCuPme2BProfileGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPme2BProfileDescr,
+       efmCuPme2BRegion,
+       efmCuPme2BsMode,
+       efmCuPme2BMinDataRate,
+       efmCuPme2BMaxDataRate,
+       efmCuPme2BPower,
+       efmCuPme2BConstellation,
+       efmCuPme2BProfileRowStatus,
+       efmCuPme2BsModeDescr,
+       efmCuPme2BsModeRowStatus,
+       efmCuPme2BEquivalentLength,
+       efmCuPme2BMaxDataRatePam16,
+       efmCuPme2BMaxDataRatePam32,
+       efmCuPme2BReachRateRowStatus
+     }
+     STATUS      current
+     DESCRIPTION
+       "A collection of objects that constitute a configuration
+
+       profile for configuration of 2BASE-TL ports."
+     ::= { efmCuGroups 7}
+
+   efmCuPme10PProfileGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPme10PProfileDescr,
+       efmCuPme10PBandplanPSDMskProfile,
+       efmCuPme10PUPBOReferenceProfile,
+       efmCuPme10PBandNotchProfiles,
+       efmCuPme10PPayloadDRateProfile,
+       efmCuPme10PPayloadURateProfile,
+       efmCuPme10PProfileRowStatus
+     }
+     STATUS  current
+     DESCRIPTION
+       "A collection of objects that constitute a configuration
+       profile for configuration of 10PASS-TS ports."
+     ::= { efmCuGroups 8 }
+
+   efmCuPme10PStatusGroup OBJECT-GROUP
+     OBJECTS {
+       efmCuPme10PFECCorrectedBlocks,
+       efmCuPme10PFECUncorrectedBlocks
+     }
+     STATUS  current
+     DESCRIPTION
+       "A collection of objects providing status information
+       specific to 10PASS-TS PMEs."
+     ::= { efmCuGroups 9 }
+
+  -- Compliance Statements
+
+   efmCuCompliance MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+       "The compliance statement for 2BASE-TL/10PASS-TS interfaces.
+       Compliance with the following external compliance statements
+       is REQUIRED:
+
+       MIB Module             Compliance Statement
+       ----------             --------------------
+       IF-MIB                 ifCompliance3
+       EtherLike-MIB          dot3Compliance2
+       MAU-MIB                mauModIfCompl3
+
+       Compliance with the following external compliance statements
+       is OPTIONAL for implementations supporting PME Aggregation
+       Function (PAF) with flexible cross-connect between the PCS
+
+       and PME ports:
+
+       MIB Module             Compliance Statement
+       ----------             --------------------
+       IF-INVERTED-STACK-MIB  ifInvCompliance
+       IF-CAP-STACK-MIB       ifCapStackCompliance"
+
+     MODULE  -- this module
+       MANDATORY-GROUPS {
+         efmCuBasicGroup,
+         efmCuPmeGroup,
+         efmCuAlarmConfGroup,
+         efmCuNotificationGroup
+       }
+
+       GROUP       efmCuPme2BProfileGroup
+       DESCRIPTION
+         "Support for this group is only required for implementations
+         supporting 2BASE-TL PHY."
+
+       GROUP       efmCuPme10PProfileGroup
+       DESCRIPTION
+         "Support for this group is only required for implementations
+         supporting 10PASS-TS PHY."
+
+       GROUP       efmCuPAFGroup
+       DESCRIPTION
+         "Support for this group is only required for
+         implementations supporting PME Aggregation Function (PAF)."
+
+       GROUP       efmCuPAFErrorsGroup
+       DESCRIPTION
+         "Support for this group is OPTIONAL for implementations
+         supporting PME Aggregation Function (PAF)."
+
+       GROUP       efmCuPme10PStatusGroup
+       DESCRIPTION
+         "Support for this group is OPTIONAL for implementations
+         supporting 10PASS-TS PHY."
+
+       OBJECT      efmCuPmeSubTypesSupported
+       SYNTAX      BITS {
+         ieee2BaseTLO(0),
+         ieee2BaseTLR(1),
+         ieee10PassTSO(2),
+         ieee10PassTSR(3)
+       }
+       DESCRIPTION
+         "Support for all subtypes is not required.  However, at
+         least one value SHALL be supported."
+
+       OBJECT      efmCuPmeAdminSubType
+       MIN-ACCESS  read-only
+       DESCRIPTION
+         "Write access is not required (needed only for PMEs
+         supporting more than a single subtype, e.g.,
+         ieee2BaseTLO and ieee2BaseTLR or ieee10PassTSO and
+         ieee10PassTSR)."
+
+       OBJECT      efmCuTargetSnrMgn
+       MIN-ACCESS  read-only
+       DESCRIPTION
+         "Write access is OPTIONAL.  For PHYs without write access,
+         the target SNR margin SHALL be fixed at 5dB for 2BASE-TL
+         and 6dB for 10PASS-TS."
+
+       OBJECT      efmCuAdaptiveSpectra
+       MIN-ACCESS  read-only
+       DESCRIPTION
+         "Write access is OPTIONAL.  For PHYs without write access,
+         the default value SHOULD be false."
+     ::= { efmCuCompliances 1 }
+END
diff --git a/snmp_builder/mibs/ELTEX-FXS72-MIB.mib b/snmp_builder/mibs/ELTEX-FXS72-MIB.mib
new file mode 100644
index 0000000..8d9e2ed
--- /dev/null
+++ b/snmp_builder/mibs/ELTEX-FXS72-MIB.mib
@@ -0,0 +1,6234 @@
+--
+-- Eltex Enterprise Specific MIB: mc240 MIB
+--
+-- Copyright (c) 2007, Eltex Co
+-- All rights reserved.
+--
+-- The contents of this document are subject to change without notice.
+--
+-- Please, use english only in this document!
+--
+-- tauMegacoTrapsTable also used for SMG SBC MSR
+--
+
+
+ELTEX-FXS72 DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Integer32, Gauge32, Counter32, TimeTicks, Unsigned32
+        FROM SNMPv2-SMI
+    TruthValue, DisplayString, TimeStamp, TimeInterval, TEXTUAL-CONVENTION, RowStatus
+        FROM SNMPv2-TC
+    OBJECT-GROUP
+    	FROM SNMPv2-CONF
+    elHardware
+        FROM ELTEX-SMI-ACTUAL;
+
+ fxs72 MODULE-IDENTITY
+    LAST-UPDATED "200910190000Z"
+    ORGANIZATION "Eltex Co"
+    CONTACT-INFO "  eltex@gcom.ru "
+    DESCRIPTION  "fxs72 mib"
+    REVISION     "200910190000Z"
+    DESCRIPTION  "last revision"
+    ::= { elHardware 9 }
+    
+SSwStatusConv ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	  undefined(0),
+      connected(1),
+      disconnected(2)}
+      
+VoltageMode ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	  high(1),
+      normal(2),
+      low(3) }
+      
+FXSFanState ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		off(0),
+		on(1)}
+		
+BoolValue ::= TEXTUAL-CONVENTION
+	STATUS  current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+			false(0),
+			true(1) }
+			
+DevTypeString ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	  fxs72(16),
+      tau72(17),
+      tau36(33),
+      tau32m(50)}
+      
+FxsPortState ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	-- off hook state --
+	hangdown(0),
+	-- on hook state --
+	hangup(1),
+	dial(2),
+	calling(3),
+	ringback(4),
+	ringing(5),
+	talking(6),
+	busy(7),
+	hold(8),
+	holdDial(9),
+	dvo(10),
+	test(11),
+	blocked(12),
+	preCalling(13),
+    conference3way(14),
+    void(15),
+    fxoHangdown(16),
+	fxoHangup(17),
+	disabled(255) }
+	
+PortMegacoState ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	-- off hook state --
+	hangdown(0),
+	-- on hook state --
+	hangup(1),
+	dial(2),
+	calling(3),
+	ringback(4),
+	ringing(5),
+	talking(6),
+	busy(7),
+	hold(8),
+	holdDial(9),
+	holdDvo(10),
+	transfer(11),
+	unattended(12),
+	blocked(13),
+    ready(14),
+    notInited(15),
+    disabled(16),
+	absent(17),
+	noActualData(255)}
+
+PortMegacoJitter ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	ok(0),
+	leakageCurrent(1),
+	overheating(2),
+	dissipatedPower(3)
+  }
+	
+SipConnectState ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	off(0),
+	ok(1),
+	failed(2)}
+
+	
+
+FxsDialPlanType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	h323GateKeeper(1),
+	sipProxy(2),
+	h323DirectIP(3),
+	sipDirectIP(4),
+	siptDirectIP(5),
+	pickupGroup(6) }
+	
+FxsAON ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		off(0),
+		aonRus(1),
+		dtmf(2),
+		fskBell202(3),
+		fskV23(4) }
+		
+FxsGroupSerialType ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		group(0),
+		serial(1),
+		cyclic(2) }
+		
+FxoGroupType ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		fxoFirstFree(3),
+		fxoAround(4) }
+
+FxsGroupBusyType ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		clearOnBusy(0),
+		waitFirstFree(1) }
+
+FxsGroupSerialEnableType ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		true(1),
+		false(2) }
+		
+FxsTaxophoneType ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION "0-3 for TAU72,36; 
+		0-1 for TAU32M (from v2.8)
+		0-3 for TAU32M-revB (from 2.10)"
+	SYNTAX INTEGER {
+		off(0),
+		polarity(1),
+		kHz16(2),
+		kHz12(3) }
+		
+  --off – Ã�¿Ã�¾Ñ€Ñ‚ рÃ�°Ã�±Ã�¾Ñ‚Ã�°Ã�µÑ‚ Ã�² Ã�¾Ã�±Ñ‹Ñ‡Ã�½Ã�¾Ã�¼ рÃ�µÃ�¶Ã�¸Ã�¼Ã�µ;
+  --polarity – рÃ�µÃ�¶Ã�¸Ã�¼ тÃ�°Ã�ºÑÂ�Ã�¾Ñ„Ã�¾Ã�½Ã�° ÑÂ� Ã�¿Ã�µÑ€Ã�µÃ�¿Ã�¾Ã�»ÑŽÑÂ�Ã�¾Ã�²Ã�ºÃ�¾Ã�¹. Ã�žÑÂ�ущÃ�µÑÂ�тÃ�²Ã�ȄÂ�Ã�µÑ‚ÑÂ�ÑÂ� Ã�¿Ã�µÑ€Ã�µÃ�¿Ã�¾Ã�»ÑŽÑÂ�Ã�¾Ã�²Ã�ºÃ�° Ã�¿Ã�¾Ã�ȄÂ�рÃ�½Ã�¾ÑÂ�тÃ�¸ Ã�¿Ã�¸Ñ‚Ã�°Ã�½Ã�¸ÑÂ� Ã�² Ã�»Ã�¸Ã�½Ã�¸Ã�¸ Ã�¿Ñ€Ã�¸ Ã�¾Ñ‚Ã�²Ã�µÑ‚Ã�µ Ã�°Ã�±Ã�¾Ã�½Ã�µÃ�½Ñ‚Ã�° Ã�¸ Ã�²Ã�¾Ã�·Ã�²Ñ€Ã�°Ñ‚ Ã�¿Ã�¾Ã�ȄÂ�рÃ�½Ã�¾ÑÂ�тÃ�¸ Ã�¿Ñ€Ã�¸ Ã�¾Ñ‚Ã�±Ã�¾Ã�µ;
+  --12kHz – рÃ�µÃ�¶Ã�¸Ã�¼ тÃ�°Ã�ºÑÂ�Ã�¾Ñ„Ã�¾Ã�½Ã�° Ã�±Ã�µÃ�· Ã�¿Ã�µÑ€Ã�µÃ�¿Ã�¾Ã�»ÑŽÑÂ�Ã�¾Ã�²Ã�ºÃ�¸. Ã�“Ã�µÃ�½Ã�µÑ€Ã�°Ñ†Ã�¸ÑÂ� тÃ�°Ñ€Ã�¸Ñ„Ã�½Ñ‹Ñ… Ã�¸Ã�¼Ã�¿ÑƒÃ�Ȅ΄Â�Ã�¾Ã�² чÃ�°ÑÂ�тÃ�¾Ñ‚Ã�¾Ã�¹ 12 kHz;
+  --16kHz – рÃ�µÃ�¶Ã�¸Ã�¼ тÃ�°Ã�ºÑÂ�Ã�¾Ñ„Ã�¾Ã�½Ã�° Ã�±Ã�µÃ�· Ã�¿Ã�µÑ€Ã�µÃ�¿Ã�¾Ã�»ÑŽÑÂ�Ã�¾Ã�²Ã�ºÃ�¸. Ã�“Ã�µÃ�½Ã�µÑ€Ã�°Ñ†Ã�¸ÑÂ� тÃ�°Ñ€Ã�¸Ñ„Ã�½Ñ‹Ñ… Ã�¸Ã�¼Ã�¿ÑƒÃ�Ȅ΄Â�Ã�¾Ã�² чÃ�°ÑÂ�тÃ�¾Ñ‚Ã�¾Ã�¹ 16 kHz;
+
+FxsDialPlanNatureType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	unknown(0),
+	subscriber(1),
+	national(2),
+	international(3) }
+
+FxsProcessFlashType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	transmitFlash(0),
+	attendedCT(1),
+	unattendedCT(2),
+	noDetectFlash(3),
+	localCT(4) -- TAU-SIP 2.7
+	}
+	
+TauDialProtocolType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	sip(1),
+	h323(2) }
+	
+ProxyMode ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	off(0),
+	parking(1),
+	homing(2) }
+
+OptionsHomeServerTest ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	invite(0),
+	options(1),
+	register(2) }
+
+AuthenticationType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	off(0),
+	global(1),
+	userDefined(2) }
+
+CwRingbackRingbackAtCallwaiting ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	ring180Ringing(0),
+	ring182Queued(1) }
+
+RemoteRingback ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	dontSendRingbackInRTP(0),
+	ringbackWith180Ringing(1),
+	ringbackWith183Progress(2) }
+
+-- application/dtmf        dtmf	0
+-- application/dtmf-relay  dtmfr	1
+-- audio/telephone-event   audio	2
+DTMFMIMEType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	applicationDtmfRelay(0),
+	applicationDtmf(1),
+	audioTelephoneEvent(2) }
+
+-- dtmf		asDTMF			0
+-- hookf		applicationHookFlash	1
+-- broadsoft	applicationBroadsoft	2
+-- sscc (Huawei) applicationSscc 3
+HookFlashMIMEType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	asDTMF(0),
+	applicationHookFlash(1),
+	applicationBroadsoft(2),
+	applicationSscc(3) }
+
+TypeTransport ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	udpPrefferedOrTcp(0),
+	tcpPrefferedOrUdp(1),
+	udpOnly(2),
+	tcpOnly(3) }
+
+Type100rel ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	supported (0),
+	required (1),
+	off(2) } 
+	
+OutboundType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	off(0),
+	on(1),
+	withBusyTone(2) }
+	
+FxoDialingType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+	dtmf(1),
+	pulse(2) }
+	
+FxsToneParametrs ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION " X;Z(A/B/1)
+				X,Y;Z(A/B/1)
+				X,Y;Z(A/B/1+2)
+				X,Y;Z(A/B/2)
+				X - frequency 1
+				Y - frequency 2 (set X=Y to use only one frequency)
+				Z - number of parcels needed for signal detection (for ringback and busy)
+				A - signal duration
+				B - pause duration "
+	SYNTAX OCTET STRING (SIZE (0..64))
+	
+TauDtmfTransferType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	inband(0), 
+  	rfc2833(1), 
+  	info(2) }
+
+TauFlashTransferType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	disabled(0), 
+  	rfc2833(1), 
+  	info(2) }
+
+TauFaxDirectionType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	both(0), 
+  	caller(1), 
+  	callee(2), 
+  	none(3) }
+
+TauFaxTransferType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	g711a(0), 
+  	g711u(1), 
+  	t38(2) }	
+
+TauFaxTransferSlaveType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	g711a(0), 
+  	g711u(1), 
+  	t38(2), 
+  	none(3) }	
+
+TauModemTransferType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	g711aVbd(0), 
+  	g711uVbd(1), 
+  	g711aRfc3108(2), 
+  	g711uRfc3108(3), 
+  	off(4), 
+  	g711aNse(5), 
+  	g711uNse(6) }	
+
+TauVoiceModeType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	fixed(0), 
+  	adaptive(1) }	
+
+TauvoiceDeletionModeType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	hard(0), 
+  	soft(1) }
+  	
+TauTrapVersion ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	v1(1), 
+  	v2(2) }
+  	
+TauMegacoTrapVersion ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	inform(0),
+  	trapV1(1), 
+  	trapV2(2) }  
+  	
+TauUserViewType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION ""
+  SYNTAX INTEGER  {
+  	readOnly(1), 
+  	readWrite(2) } 
+
+FxoGroupBusyType ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		clearOnBusy(0),
+		waitFirstFree(1) }
+
+FxsNetworkAutoupdateSourceType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION	""
+	SYNTAX		INTEGER {
+		dhcp(0),
+		dhcpVlan1(1),
+		dhcpVlan2(2),
+		dhcpVlan3(3),
+		noDhcp(4)
+	}
+	
+SipLogLevel ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		none(-1),
+		fatalErrors(0),
+		criticalErrors(1),
+		nonCriticalErrors(2),
+		warnings(3),
+		verbose1(4),
+		signalProtocol(5),
+		verbose2(6),
+		mediaProtocol(7),
+		verobse3(8),
+		everything(9) }
+		
+H323LogLevel ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		none(0),
+		errors(1),
+		warnings(2),
+		info(3),
+		debugA(4),
+		debugB(5),
+		debugC(6) }
+		
+VapiLibLogLevel ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		none(0),
+		api(1),
+		apiPacket(2),
+		vapiInfo(3),
+		vapiGtlInfo(4),
+		vapiUt(5),
+		allInfo(6) }
+		
+VapiAppLogLevel ::= TEXTUAL-CONVENTION
+	STATUS current
+	DESCRIPTION ""
+	SYNTAX INTEGER {
+		none(5),
+		warnings(4),
+		packet(3),
+		debug(2),
+		info(1) }
+		
+FxsPortTestStatus ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+	idle(0),
+	requested(1),
+	completed(2),
+	disabled(255) }
+	
+FxsPortTestFlag ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+	unknown(-1),
+	ok(0),
+	overheat(1),
+	leakageCurrent(2),
+	resistanceNotMeasured(3),
+	capacitanceNotMeasured(4),
+	testingUnavailable(5),
+	testFailure(255) }
+	
+KeepAliveMode ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+	off(0),
+	options(1),
+	notify(2),
+	clrf(3) }
+	
+ConferenceMode ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.8"
+  SYNTAX INTEGER  {
+	local(0),
+	remote(1) }
+	
+GroupRegistrationState ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+	off(0),
+	ok(1),
+	failed(2) }
+	
+FirewallProtocol ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+			-- to config file
+	any(0), -- any
+	udp(1), -- UDP
+	tcp(2), -- TCP
+	icmp(3) -- ICMP
+	}
+	
+TypeOfMessageICMP ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+	any(0), -- any
+	echoReply(1), -- echo-reply
+	destinationUnreachable(2), -- destination-unreachable
+	networkUnreachable(3), -- network-unreachable
+	hostUnreachable(4), -- host-unreachable
+	protocolUnreachable(5), -- protocol-unreachable
+	portUnreachable(6), -- port-unreachable
+	fragmentationNeeded(7), -- fragmentation-needed
+	sourceRouteFailed(8), -- source-route-failed
+	networkUnknown(9), -- network-unknown
+	hostUnknown(10), -- host-unknown
+	networkProhibited(11), -- network-prohibited
+	hostProhibited(12), -- host-prohibited
+	tosNetworkUnreachable(13), -- TOS-network-unreachable
+	tosHostUnreachable(14), -- TOS-host-unreachable
+	communicationProhibited(15), -- communication-prohibited
+	hostPrecedenceViolation(16), -- host-precedence-violation
+	precedenceCutoff(17), -- precedence-cutoff
+	sourceQuench(18), -- source-quench
+	redirect(19), -- redirect
+	networkRedirect(20), -- network-redirect
+	hostRedirect(21), -- host-redirect
+	tosNetworkRedirect(22), -- TOS-network-redirect
+	tosHostRedirect(23), -- TOS-host-redirect
+	echoRequest(24), -- echo-request
+	routerAdvertisement(25), -- router-advertisement
+	routerSolicitation(26), -- router-solicitation
+	timeExceeded(27), -- time-exceeded
+	ttlZeroDuringTransit(28), -- ttl-zero-during-transit
+	ttlZeroDuringReassembly(29), -- ttl-zero-during-reassembly
+	parameterProblem(30), -- parameter-problem
+	ipHeaderBad(31), -- ip-header-bad
+	requiredOptionMissing(32), -- required-option-missing
+	timestampRequest(33), -- timestamp-request
+	timestampReply(34), -- timestamp-reply
+	addressMaskRequest(35), -- address-mask-request
+	addressMaskReply(36) -- address-mask-reply
+  }
+  
+FirewallTarget ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.7"
+  SYNTAX INTEGER  {
+			-- to config file
+	drop(0), -- DROP
+	accept(1), -- ACCEPT
+	reject(2) -- REJECT
+	}
+
+ReversalPolarityAction ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.9"
+  SYNTAX INTEGER  {
+	ignore(0), -- Ignore polarity reversal
+	release(1), -- Release after polarity reversal detection
+	answer(2) -- Answer after polarity reversal detection
+	}
+	
+CallLimitType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.9"
+  SYNTAX INTEGER  {
+	proxyGk(0),
+	host(1)
+	}
+	
+PowerMode ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.9. added for TAU-32M-revB (TAU-32M_1v5)"
+  SYNTAX INTEGER  {
+	normal(0), -- fans off, lowLineVoltage
+	extendedRange(1) -- fans enabled, normalLineVoltage
+	}
+	
+DRSubscriberProfilesType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.9
+    set 01 = 00000001 to enable Profile1
+    set 03 = 00000011 to enable Profile2 and Profile1
+	set 80 = 10000000 to enable Profile8"
+  SYNTAX OCTET STRING (SIZE(1))	
+
+PstnActivityType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.9"
+  SYNTAX INTEGER  {
+	off(0),
+	releaseAtPstnReversalPolarityDetection(1),
+	answerAtPstnReversalPolarityDetection(2),
+	pstnAnswerDetection(3) }
+	
+IMSMode ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "IMS notify mode TAU-SIP 2.10"
+  SYNTAX INTEGER  {
+	off(0),
+	implicit(1),
+	explicit(2) }
+	
+AutoupdateProtocolType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.12"
+  SYNTAX INTEGER  {
+    tftp(0),
+    ftp(1),
+    http(2),
+    https(3) }
+    
+SipProfileChangeoverType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "TAU-SIP 2.12"
+  SYNTAX INTEGER  {
+    changeoverOnFailureOfInviteOrRegisterRequest(0),
+    changeoverOnFailureOfRegisterRequest(1) }
+    
+DevPowerType ::= TEXTUAL-CONVENTION
+  STATUS current
+  DESCRIPTION "Power type. TAU-SIP 2.13"
+  SYNTAX INTEGER {
+	ac(1),
+	dc(2)
+  }
+
+-- main pbx properties
+
+    fxsDevName OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..255))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"PBX name 'fxs72'"
+	::= { fxs72 1 }
+
+    fxsDevType OBJECT-TYPE
+	SYNTAX		DevTypeString
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"device type"
+	::= { fxs72 2 }
+
+    fxsDevCfgBuild OBJECT-TYPE
+	SYNTAX		DisplayString (SIZE (0..255))
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"os build string: compiling data and other info"
+	::= { fxs72 3 }
+
+    fxsFreeSpace OBJECT-TYPE
+	SYNTAX		DisplayString
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"percent of free blocks on flash disk"
+	::= { fxs72 4 }
+
+    fxsFreeRam OBJECT-TYPE
+	SYNTAX		DisplayString
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"free RAM (bytes)"
+	::= { fxs72 5 }
+	
+	fxsSSwStatus  OBJECT-TYPE
+	SYNTAX		SSwStatusConv
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Softswitch status"
+	::= { fxs72 6 }
+	
+	fxsSSwStatusTime  OBJECT-TYPE
+	SYNTAX		TimeTicks
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"How long in current state"
+	::= { fxs72 7 }
+	
+	fxsCpuUsage  OBJECT-TYPE
+	SYNTAX		DisplayString
+	MAX-ACCESS	read-only
+	STATUS		current
+	DESCRIPTION
+		"Total CPU usage (%)"
+	::= { fxs72 8 }
+	
+fxsMonitoring OBJECT IDENTIFIER ::= { fxs72 10 }
+
+    fxsMonitoringVMode OBJECT-TYPE
+		SYNTAX		VoltageMode
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 1 }
+	
+    fxsMonitoringVBat OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"V"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 2 }
+	
+	fxsMonitoringVRing1 OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"V"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 3 }
+		
+	fxsMonitoringVRing2 OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"V"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 4 }
+		
+	fxsMonitoringTemp1 OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"°C"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 5 }
+		
+	fxsMonitoringTemp2 OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"°C"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 6 }
+		
+	fxsMonitoringTemp3 OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"°C"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 7 }
+	
+	fxsMonitoringTemp4 OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"°C"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 8 }
+		
+	fxsMonitoringFanState OBJECT-TYPE
+		SYNTAX		FXSFanState
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 9 }
+		
+	fxsMonitoringFan1Rotate OBJECT-TYPE
+		SYNTAX		BoolValue
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 10 }
+		
+	fxsMonitoringFan2Rotate OBJECT-TYPE
+		SYNTAX		BoolValue
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 11 }
+		
+	fxsMonitoringSubCooling OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" "
+		::= { fxsMonitoring 12 }
+		
+	fxsMonitoringVinput OBJECT-TYPE
+		SYNTAX		Integer32
+		UNITS		"V"
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			" added for TAU-32M "
+		::= { fxsMonitoring 13 }
+		
+	fxsMonitoringDevicePower OBJECT-TYPE
+		SYNTAX     DevPowerType
+		MAX-ACCESS read-only
+		STATUS     current
+		DESCRIPTION "Power: AC, DC"
+		::= { fxsMonitoring 14 }
+
+fxsPortsMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxs72 11 }
+
+fxsPorts OBJECT IDENTIFIER ::= { fxs72 12 }
+
+	fxsPortsMonitoringTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF FxsPortsMonitoringEntry
+	MAX-ACCESS        not-accessible
+	STATUS                current
+	DESCRIPTION " "
+	::= { fxsPorts 1 }
+
+		fxsPortsMonitoringEntry OBJECT-TYPE
+		SYNTAX		FxsPortsMonitoringEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { fxsPortNumber }
+		::= { fxsPortsMonitoringTable 1 }
+
+		FxsPortsMonitoringEntry ::= SEQUENCE {
+			fxsPortNumber		Integer32,
+			fxsPortPhoneNumber	DisplayString,
+			fxsPortState		FxsPortState,
+			fxsPortUserName 	DisplayString,
+			fxsPortTalkingNum	DisplayString,
+			fxsPortTalkingStartTime	DisplayString,
+			fxsPortSipConnected DisplayString,
+			fxsPortH323Connected DisplayString,
+			fxsPortSipConnecteNext DisplayString,
+			fxsPortSipConnecteState SipConnectState,
+			fxsPortSipConnectHost DisplayString }
+			
+		
+		fxsPortNumber  OBJECT-TYPE
+			SYNTAX     Integer32 (1..72)
+			MAX-ACCESS not-accessible
+			STATUS     current
+			DESCRIPTION "fxs port number
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 1 }
+		
+		fxsPortPhoneNumber  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "fxs port phone number
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 2 }
+							
+		fxsPortState  OBJECT-TYPE
+			SYNTAX     FxsPortState
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "fxs port state
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 3 }
+			
+		fxsPortUserName  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "fxs port user name
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 4 }
+			
+		fxsPortTalkingNum  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Current phone number of remote party
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 5 }
+			
+		fxsPortTalkingStartTime  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "start talking time
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 6 }
+			
+		fxsPortSipConnected  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "time of last sip connect
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 7 }
+			
+		fxsPortH323Connected  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "time since h323 connect
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 8 }
+			
+		fxsPortSipConnecteNext  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "time of next sip connect
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 9 }
+			
+		fxsPortSipConnecteState  OBJECT-TYPE
+			SYNTAX     SipConnectState
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "sip connect state
+							TAU-SIP"
+			::= { fxsPortsMonitoringEntry 10 }
+			
+		fxsPortSipConnectHost  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "sip connect host. 
+							TAU-SIP 2.7"
+			::= { fxsPortsMonitoringEntry 11 }
+			
+			
+	fxsPortsConfigTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF FxsPortsConfigEntry
+	MAX-ACCESS        not-accessible
+	STATUS                current
+	DESCRIPTION " "
+	::= { fxsPorts 2 }
+
+		fxsPortsConfigEntry OBJECT-TYPE
+		SYNTAX		FxsPortsConfigEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { fxsPortNumber }
+		::= { fxsPortsConfigTable 1 }
+
+		FxsPortsConfigEntry ::= SEQUENCE {
+			--fxsPortNumber		Integer32, // Ã�µÑÂ�ть Ã�² Ã�¿Ñ€Ã�µÃ�´Ñ‹Ã�´ÑƒÑ‰Ã�µÃ�¹ тÃ�°Ã�±Ã�»Ã�¸Ñ†Ã�µ
+			fxsPortConfigPhone		DisplayString,
+			fxsPortConfigUserName	DisplayString,
+			fxsPortConfigAuthName  	DisplayString,
+			fxsPortConfigAuthPass  	DisplayString,
+			fxsPortConfigCustom  	TruthValue,
+			fxsPortConfigPlaymoh  TruthValue,
+			fxsPortConfigAON  FxsAON,
+			fxsPortConfigAONHideDate  TruthValue,
+			fxsPortConfigAONHideName  TruthValue,
+			fxsPortConfigTaxophone  FxsTaxophoneType,
+			fxsPortConfigMinFlashtime  Integer32,
+			fxsPortConfigMaxFlashtime  Integer32,
+			fxsPortConfigGainr  Integer32,
+			fxsPortConfigGaint  Integer32,
+			fxsPortConfigCategory  Integer32,
+			fxsPortConfigCallTransfer  FxsProcessFlashType,
+			fxsPortConfigCallWaiting  TruthValue,
+			fxsPortConfigHotLine   TruthValue,
+			fxsPortConfigHotNumber  DisplayString,
+			fxsPortConfigHotTimeout  Integer32,
+			fxsPortConfigDisabled  TruthValue,
+			fxsPortConfigCtBusy  TruthValue,
+			fxsPortConfigCtUnconditional  TruthValue,
+			fxsPortConfigCtNoanswer  TruthValue,
+			fxsPortConfigCtNumber  DisplayString,
+			fxsPortConfigCtTimeout  Integer32,
+			fxsPortConfigClir TruthValue,
+			fxsPortConfigStopDial TruthValue,
+			fxsPortConfigAltNumber  DisplayString,
+			fxsPortConfigUseAltNumber TruthValue,
+			fxsPortConfigPickUp  DisplayString,
+			fxsPortConfigSipPort  Integer32,
+			fxsPortConfigCfgPriOverCw TruthValue,
+			fxsPortConfigRowStatus RowStatus,
+			fxsPortConfigDvoCwEn TruthValue,
+			fxsPortConfigDvoCtAttendedEn TruthValue,
+			fxsPortConfigDvoCtUnattendedEn TruthValue,
+			fxsPortConfigDvoUnconditionalEn TruthValue,
+			fxsPortConfigDvoCfBusyEn TruthValue,
+			fxsPortConfigDvoCfAnswerEn TruthValue,
+			fxsPortConfigDvoCfServiceEn TruthValue,
+			fxsPortConfigDvoDoDisturbEn TruthValue,
+			fxsPortConfigCtOutofservice TruthValue,
+			fxsPortConfigCfuNumber DisplayString,
+			fxsPortConfigCfbNumber DisplayString,
+			fxsPortConfigCfnrNumber DisplayString,
+			fxsPortConfigCfoosNumber DisplayString,
+			fxsPortConfigDnd TruthValue,
+			fxsPortConfigFxoFlashTime Integer32,
+			fxsPortConfigFxoDelTdm Integer32,
+			fxsPortConfigFxoRingtdm Integer32,
+			fxsPortConfigPstnNumberprefix DisplayString,
+			fxsPortConfigPstnNameprefix DisplayString,
+			fxsPortConfigUsePstnCid TruthValue,
+			fxsPortConfigtdmhotline TruthValue,
+			fxsPortConfigtdmhottimeout Integer32,
+			fxsPortConfigtdmhotnumber DisplayString,
+			fxsPortConfigEnableCpc TruthValue,
+			fxsPortConfigCpcTime Integer32,
+			fxsPortConfigDontDetectDT TruthValue,
+			fxsPortConfigDelayDialingTimeout Integer32,
+			fxsPortType DisplayString,
+			fxsPortConfigDialing FxoDialingType,
+			fxsPortConfigTransmitNumber TruthValue,
+			fxsPortConfigDontTransmitPrefix TruthValue,
+			fxsPortConfigPortProfileID Integer32,
+			fxsPortConfigSipProfileID Integer32,
+			fxsPortConfigDialToneDetectionParameters FxsToneParametrs,
+			fxsPortConfigRingBackToneDetectionParameters FxsToneParametrs,
+			fxsPortConfigBusyToneDetectionParameters FxsToneParametrs,
+			fxsPortConfigDtDetectTime Integer32,
+			fxsPortConfigDecadePulseTime Integer32,
+			fxsPortConfigDecadePauseTime Integer32,
+			fxsPortConfigNoOffhookAtRinging TruthValue,
+			fxsPortConfigFxoCallBusy TruthValue,
+			fxsPortConfigCpcRus Integer32,
+			fxsPortConfigReversalPolarityAction ReversalPolarityAction,
+			fxsPortConfigPstnActivity PstnActivityType,
+			fxsPortConfigPstnRbDetectTimeout Integer32,
+			fxsPortConfigDetectFxoLinePresence TruthValue,	
+			fxsPortConfigBlockFxoLineInOutgoingDirection TruthValue,
+			fxsPortConfigFxoMinLevelDetect Integer32,
+			fxsPortConfigUseAltNumberAsContact TruthValue,
+			fxsPortConfigModifier Integer32,
+			fxsPortConfigMwiDialtone TruthValue
+			 }
+			
+		fxsPortConfigPhone  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 1 }	
+
+		fxsPortConfigUserName  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 2 }	
+
+		fxsPortConfigAuthName  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 3 }	
+
+		fxsPortConfigAuthPass  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 4 }	
+
+		fxsPortConfigCustom  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 5 }
+
+		fxsPortConfigPlaymoh  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 6 }
+
+		fxsPortConfigAON  OBJECT-TYPE
+			SYNTAX     FxsAON
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 7 }
+
+		fxsPortConfigAONHideDate  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 8 }
+			
+		fxsPortConfigAONHideName  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 9 }
+
+		fxsPortConfigTaxophone  OBJECT-TYPE
+			SYNTAX     FxsTaxophoneType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 10 }
+
+		fxsPortConfigMinFlashtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "70-2000(from v2.8),1000(to v2.7)"
+			::= { fxsPortsConfigEntry 11 }
+
+		fxsPortConfigMaxFlashtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "70-2000(from v2.8),1000(to v2.7)"
+			::= { fxsPortsConfigEntry 12 }
+
+		fxsPortConfigGainr  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 13 }
+
+		fxsPortConfigGaint  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 14 }
+
+		fxsPortConfigCategory  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 15 }
+
+		fxsPortConfigCallTransfer  OBJECT-TYPE
+			SYNTAX     FxsProcessFlashType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 16 }
+
+		fxsPortConfigCallWaiting  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 17 }
+
+		fxsPortConfigHotLine  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 18 }
+
+		fxsPortConfigHotNumber  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 19 }
+
+		fxsPortConfigHotTimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 20 }
+
+		fxsPortConfigDisabled  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 21 }
+
+		fxsPortConfigCtBusy  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 22 }
+
+		fxsPortConfigCtUnconditional  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 23 }
+			
+		fxsPortConfigCtNoanswer  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 24 }
+
+		fxsPortConfigCtNumber  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 25 }
+
+		fxsPortConfigCtTimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 26 }
+
+		fxsPortConfigClir OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 27 }
+
+		fxsPortConfigStopDial OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 28 }
+
+		fxsPortConfigAltNumber  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 29 }
+
+		fxsPortConfigUseAltNumber OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 30 }
+
+		fxsPortConfigPickUp  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 31 }
+
+		fxsPortConfigSipPort  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 32 }
+			
+		fxsPortConfigCfgPriOverCw  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 33 }	
+			
+		fxsPortConfigRowStatus OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " we will save all our fixes when Commit set to 1 "
+			::= { fxsPortsConfigEntry 34 }
+			
+		fxsPortConfigDvoCwEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 35 }
+		fxsPortConfigDvoCtAttendedEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 36 }
+		fxsPortConfigDvoCtUnattendedEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 37 }
+		fxsPortConfigDvoUnconditionalEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 38 }
+		fxsPortConfigDvoCfBusyEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 39 }
+		fxsPortConfigDvoCfAnswerEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 40 }
+		fxsPortConfigDvoCfServiceEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 41 }
+		fxsPortConfigDvoDoDisturbEn OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 42 }
+		fxsPortConfigCtOutofservice OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 43 }
+		fxsPortConfigCfuNumber OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 44 }
+		fxsPortConfigCfbNumber OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 45 }
+		fxsPortConfigCfnrNumber OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 46 }
+		fxsPortConfigCfoosNumber OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 47 }
+		fxsPortConfigDnd OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 48 }
+			
+		fxsPortConfigFxoFlashTime OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "70 1000 def 300 ms"
+			::= { fxsPortsConfigEntry 49 }
+			
+		fxsPortConfigFxoDelTdm OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "100 1000 def 200 ms"
+			::= { fxsPortsConfigEntry 50 }
+			
+		fxsPortConfigFxoRingtdm OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2 10 def 2"
+			::= { fxsPortsConfigEntry 51 }
+			
+		fxsPortConfigPstnNumberprefix OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "max len 20. allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 52 }
+			
+		fxsPortConfigPstnNameprefix OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "max len 20"
+			::= { fxsPortsConfigEntry 53 }
+			
+		fxsPortConfigUsePstnCid OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 54 }
+			
+		fxsPortConfigtdmhotline OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 55 }
+			
+		fxsPortConfigtdmhottimeout OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "0 300 def 15. FXO only"
+			::= { fxsPortsConfigEntry 56 }
+			
+		fxsPortConfigtdmhotnumber OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "max len 30. allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { fxsPortsConfigEntry 57 }
+			
+		fxsPortConfigEnableCpc OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "def false"
+			::= { fxsPortsConfigEntry 58 }
+			
+		fxsPortConfigCpcTime OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "200-600 ms def 200"
+			::= { fxsPortsConfigEntry 59 }
+			
+		fxsPortConfigDontDetectDT OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "def false"
+			::= { fxsPortsConfigEntry 60 }
+			
+        fxsPortConfigDelayDialingTimeout OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "0-10 ms def 2"
+			::= { fxsPortsConfigEntry 61 }
+			
+		fxsPortType OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "FXS, FXO, NONE"
+			::= { fxsPortsConfigEntry 62 }
+			
+		fxsPortConfigDialing  OBJECT-TYPE
+			SYNTAX     FxoDialingType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 63 }
+			
+		fxsPortConfigTransmitNumber  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 64 }
+			
+		fxsPortConfigDontTransmitPrefix OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 65 }
+			
+		fxsPortConfigPortProfileID OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 66 }
+			
+		fxsPortConfigSipProfileID OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 67 }
+			
+		fxsPortConfigDialToneDetectionParameters OBJECT-TYPE
+			SYNTAX     FxsToneParametrs
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "FXO only"
+			::= { fxsPortsConfigEntry 68 }
+		
+		fxsPortConfigRingBackToneDetectionParameters OBJECT-TYPE
+			SYNTAX     FxsToneParametrs
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "FXO only"
+			::= { fxsPortsConfigEntry 69 }
+		
+		fxsPortConfigBusyToneDetectionParameters OBJECT-TYPE
+			SYNTAX     FxsToneParametrs
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "FXO only"
+			::= { fxsPortsConfigEntry 70 }
+		
+		fxsPortConfigDtDetectTime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 71 }
+		
+		fxsPortConfigDecadePulseTime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 72 }
+		
+		fxsPortConfigDecadePauseTime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsPortsConfigEntry 73 }
+			
+		fxsPortConfigNoOffhookAtRinging  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO"
+			::= { fxsPortsConfigEntry 74 }
+		
+		fxsPortConfigFxoCallBusy  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. Send '503 Service unavailable' on busy (SIP)"
+			::= { fxsPortsConfigEntry 75 }
+			
+		fxsPortConfigCpcRus  OBJECT-TYPE
+			SYNTAX     Integer32 (0..10)
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "1..10 or 0 (off)"
+			::= { fxsPortsConfigEntry 76 }
+			
+		fxsPortConfigReversalPolarityAction  OBJECT-TYPE
+			SYNTAX     ReversalPolarityAction
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "only for FXO. TAU-SIP 2.9. Deprecated by PstnActivity"
+			::= { fxsPortsConfigEntry 77 }
+			
+		fxsPortConfigPstnActivity  OBJECT-TYPE
+			SYNTAX     PstnActivityType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. TAU-SIP 2.9. pstn_200_at_answer"
+			::= { fxsPortsConfigEntry 78 }
+			
+		fxsPortConfigPstnRbDetectTimeout  OBJECT-TYPE
+			SYNTAX     Integer32 (1..60)
+			UNITS	   "sec"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. TAU-SIP 2.9"
+			::= { fxsPortsConfigEntry 79 }
+			
+		fxsPortConfigDetectFxoLinePresence  OBJECT-TYPE
+			SYNTAX     TruthValue	
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. TAU-SIP 2.10"
+			::= { fxsPortsConfigEntry 80 }
+			
+		fxsPortConfigBlockFxoLineInOutgoingDirection  OBJECT-TYPE
+			SYNTAX     TruthValue	
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. TAU-SIP 2.10"
+			::= { fxsPortsConfigEntry 81 }
+			
+		fxsPortConfigFxoMinLevelDetect  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Minimum level of detectable signal (dBm): -40..-20 (def -36)
+				TAU-SIP 2.10. FXO only"
+			::= { fxsPortsConfigEntry 82 }
+			
+		fxsPortConfigUseAltNumberAsContact  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Use alternative number as contact (only for serial groups members)
+				TAU-SIP 2.12"
+			::= { fxsPortsConfigEntry 83 }
+
+		fxsPortConfigModifier  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "modifierNumber (1..16) at modifiersTable or -1=off
+				TAU-SIP 2.12"
+			::= { fxsPortsConfigEntry 84 }
+			
+		fxsPortConfigMwiDialtone  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "MWI Dialtone
+				TAU-SIP 2.13"
+			::= { fxsPortsConfigEntry 85 }
+		
+fxsPortsConfigCommon OBJECT IDENTIFIER ::= { fxsPorts 3 }
+
+		fxsPortConfigCommonPlaymoh  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 1 }
+
+		fxsPortConfigCommonAON  OBJECT-TYPE
+			SYNTAX     FxsAON
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 2 }
+			
+		fxsPortConfigCommonAONHideDate  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 3 }
+			
+		fxsPortConfigCommonAONHideName  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 4 }
+
+		fxsPortConfigCommonTaxophone  OBJECT-TYPE
+			SYNTAX     FxsTaxophoneType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 5 }
+
+		fxsPortConfigCommonMinFlashtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 6 }
+
+		fxsPortConfigCommonMaxFlashtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 7 }
+
+		fxsPortConfigCommonGainr  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 8 }
+
+		fxsPortConfigCommonGaint  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 9 }
+
+		fxsPortConfigCommonCategory  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 10 }
+
+		fxsPortConfigCommonCallTransfer  OBJECT-TYPE
+			SYNTAX     FxsProcessFlashType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 11 }
+
+		fxsPortConfigCommonCallWaiting  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 12 }
+
+		--fxsPortConfigCommonDisabled  OBJECT-TYPE
+		--	SYNTAX     TruthValue
+		--	MAX-ACCESS read-write
+		--	STATUS     obsolete
+		--	DESCRIPTION " "
+		--	::= { fxsPortsConfigCommon 13 }
+			
+		fxsPortConfigCommonCfgPriOverCw OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 13 }
+			
+		fxsPortConfigCommonFxoFlashTime OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "70 1000 def 300 ms"
+			::= { fxsPortsConfigCommon 14 }
+			
+		fxsPortConfigCommonFxoDelTdm OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "100 1000 def 200 ms"
+			::= { fxsPortsConfigCommon 15 }
+			
+		fxsPortConfigCommonFxoRingtdm OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "2 10 def 2"
+			::= { fxsPortsConfigCommon 16 }
+			
+		fxsPortConfigCommonPstnNumberprefix OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "max len 20 "
+			::= { fxsPortsConfigCommon 17 }
+			
+		fxsPortConfigCommonPstnNameprefix OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "max len 20 "
+			::= { fxsPortsConfigCommon 18 }
+			
+		fxsPortConfigCommonUsePstnCid OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 19 }
+			
+		fxsPortConfigCommonEnableCpc OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 20 }
+			
+		fxsPortConfigCommonCpcTime OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 21 }
+			
+		fxsPortConfigCommonDontDetectDT OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "def false"
+			::= { fxsPortsConfigCommon 22 }
+			
+        fxsPortConfigCommonDelayDialingTimeout OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "0-10 ms def 2"
+			::= { fxsPortsConfigCommon 23 }
+			
+		fxsPortConfigCommonDialing  OBJECT-TYPE
+			SYNTAX     FxoDialingType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 24 }
+			
+		fxsPortConfigCommonTransmitNumber  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 25 }
+			
+		fxsPortConfigCommonDontTransmitPrefix OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsPortsConfigCommon 26 }
+			
+		
+
+	megacoPortsMonitoringTable OBJECT-TYPE
+	SYNTAX				SEQUENCE OF MegacoPortsMonitoringEntry
+	MAX-ACCESS        	not-accessible
+	STATUS         		current
+	DESCRIPTION "TAU-MEGACO RC03"
+	::= { fxsPorts 4 }
+
+		megacoPortsMonitoringEntry OBJECT-TYPE
+		SYNTAX		MegacoPortsMonitoringEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { megacoPortNumber }
+		::= { megacoPortsMonitoringTable 1 }
+
+		MegacoPortsMonitoringEntry ::= SEQUENCE {
+			megacoPortNumber			Integer32,
+			megacoPortTerminationID		DisplayString,
+			megacoPortComments			DisplayString,
+			megacoPortState				PortMegacoState,
+			megacoPortStateStartTime	DisplayString,
+			megacoPortStateDuration		DisplayString,
+			megacoPortJitter 			PortMegacoJitter,
+			megacoPortTelNo				DisplayString }
+			
+		
+		megacoPortNumber  OBJECT-TYPE
+			SYNTAX     Integer32 (1..72)
+			MAX-ACCESS not-accessible
+			STATUS     current
+			DESCRIPTION "megaco port number"
+			::= { megacoPortsMonitoringEntry 1 }
+		
+		megacoPortTerminationID  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "megaco port Termination ID (from cfg)"
+			::= { megacoPortsMonitoringEntry 2 }
+			
+		megacoPortComments  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "megaco port Comments (from cfg)"
+			::= { megacoPortsMonitoringEntry 3 }
+							
+		megacoPortState  OBJECT-TYPE
+			SYNTAX     PortMegacoState
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "megaco port state"
+			::= { megacoPortsMonitoringEntry 4 }
+			
+		megacoPortStateStartTime  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "current state start time"
+			::= { megacoPortsMonitoringEntry 5 }
+			
+		megacoPortStateDuration  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "or current state duration [DD hh:mm:ss]"
+			::= { megacoPortsMonitoringEntry 6 }
+			
+		megacoPortJitter  OBJECT-TYPE
+			SYNTAX     PortMegacoJitter
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "port jitter"
+			::= { megacoPortsMonitoringEntry 7 }
+			
+		megacoPortTelNo  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "megaco port TelNo (from cfg)"
+			::= { megacoPortsMonitoringEntry 8 }
+
+fxsDialMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxs72 13 }
+
+fxsDial OBJECT IDENTIFIER ::= { fxs72 14 }
+
+fxsDialPlanTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF FxsDialPlanEntry
+	MAX-ACCESS        not-accessible
+	STATUS                obsolete
+	DESCRIPTION " "
+	::= { fxsDial 1 }
+
+		fxsDialPlanEntry OBJECT-TYPE
+		SYNTAX		FxsDialPlanEntry
+		MAX-ACCESS	not-accessible
+		STATUS		obsolete
+		DESCRIPTION " "
+		INDEX { fxsDialPlanNumber }
+		::= { fxsDialPlanTable 1 }
+
+		FxsDialPlanEntry ::= SEQUENCE {
+			fxsDialPlanHost				DisplayString,
+			fxsDialPlanDigits			DisplayString,
+			fxsDialPlanTimeout			Integer32,
+			fxsDialPlanMinDigits		Integer32,
+			fxsDialPlanType				FxsDialPlanType,
+			fxsDialPlanAccessMask		DisplayString,
+			fxsDialPlanDialtone			TruthValue,
+			fxsDialPlanModifier			DisplayString,
+			fxsDialPlanNature			FxsDialPlanNatureType,
+			fxsDialPlanDelnum			Integer32,
+			fxsDialPlanPtime 			Integer32,
+			fxsDialRowStatus			RowStatus,
+			fxsDialPlanNumber			Integer32
+		}
+
+		fxsDialPlanHost  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 1 }
+			
+		fxsDialPlanDigits  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 2 }
+			
+		fxsDialPlanTimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 3 }
+			
+		fxsDialPlanMinDigits  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 4 }
+			
+		fxsDialPlanType  OBJECT-TYPE
+			SYNTAX     FxsDialPlanType
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 5 }
+			
+		fxsDialPlanAccessMask  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 6 }
+			
+		fxsDialPlanDialtone  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 7 }
+			
+		fxsDialPlanModifier  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 8 }
+			
+		fxsDialPlanNature  OBJECT-TYPE
+			SYNTAX     FxsDialPlanNatureType
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 9 }
+			
+		fxsDialPlanDelnum  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 10 }
+			
+		fxsDialPlanPtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 11 }
+
+		fxsDialRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 12 }
+			
+		fxsDialPlanNumber  OBJECT-TYPE
+			SYNTAX     Integer32 (1..300)
+			MAX-ACCESS not-accessible
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { fxsDialPlanEntry 13 }
+			
+fxsDialPlanNext OBJECT-TYPE
+	SYNTAX		Integer32
+	MAX-ACCESS	read-only
+	STATUS		obsolete
+	DESCRIPTION " Show next (empty) position in DialPlanTable "
+	::= { fxsDial 2 }
+	
+tauDialPlansRegExp OBJECT IDENTIFIER        ::= { fxsDial 3 }
+
+	tauDialRegularOn  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauDialPlansRegExp 1 }
+			
+	tauDialRegularProtocol  OBJECT-TYPE
+			SYNTAX     TauDialProtocolType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauDialPlansRegExp 2 }
+			
+	tauDialRegularText  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauDialPlansRegExp 3 }
+
+fxsConfigSave OBJECT-TYPE
+	SYNTAX		Integer32
+	MAX-ACCESS	read-write
+	STATUS		current
+	DESCRIPTION " SET 1 to save /etc "
+::= { fxs72 15 }
+	
+fxsConfigApply OBJECT-TYPE
+	SYNTAX		Integer32
+	MAX-ACCESS	read-write
+	STATUS		obsolete
+	DESCRIPTION " SET 1 to reload all configuration "
+::= { fxs72 16 }
+
+fxsSerialGroupsMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxs72 17 }
+
+fxsSerialGroups OBJECT IDENTIFIER ::= { fxs72 18 }
+
+	fxsSerialGroupsTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF FxsSerialGroupsEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION " "
+	::= { fxsSerialGroups 1 }
+
+		fxsSerialGroupsEntry OBJECT-TYPE
+		SYNTAX		FxsSerialGroupsEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { fxsDialPlanNumber }
+		::= { fxsSerialGroupsTable 1 }
+
+		FxsSerialGroupsEntry ::= SEQUENCE {
+			fxsSerialGroupsPhone		DisplayString,
+			fxsSerialGroupsEnabled		Integer32,
+			fxsSerialGroupsSerialType	FxsGroupSerialType,
+			fxsSerialGroupsBusyType		FxsGroupBusyType,
+			fxsSerialGroupsTimeout 		Integer32,
+			fxsSerialGroupsSipPort 		Integer32,
+			fxsSerialGroupsAuthName 	DisplayString,
+			fxsSerialGroupsAuthPass 	DisplayString,
+			fxsSerialGroupsPorts 		DisplayString,
+			fxsSerialGroupsSipProfile Integer32,
+			fxsSerialGroupsRowStatus	RowStatus
+		}
+
+		fxsSerialGroupsPhone  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 1 }
+			
+		fxsSerialGroupsEnabled  OBJECT-TYPE
+			SYNTAX     FxsGroupSerialEnableType
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 2 }
+			
+		fxsSerialGroupsSerialType  OBJECT-TYPE
+			SYNTAX     FxsGroupSerialType
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 3 }
+			
+		fxsSerialGroupsBusyType  OBJECT-TYPE
+			SYNTAX     FxsGroupBusyType
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 4 }
+			
+		fxsSerialGroupsTimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 5 }
+			
+		fxsSerialGroupsSipPort  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 6 }
+			
+		fxsSerialGroupsAuthName  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 7 }
+			
+		fxsSerialGroupsAuthPass  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 8 }
+			
+		fxsSerialGroupsPorts  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 9 }
+			
+		fxsSerialGroupsSipProfile  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 10 }
+			
+		fxsSerialGroupsRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsSerialGroupsEntry 11 }
+			
+		
+
+	fxsSerialGroupsNextEmpty OBJECT-TYPE
+	SYNTAX			Integer32
+	MAX-ACCESS		read-only
+	STATUS			current
+	DESCRIPTION " "
+	::= { fxsSerialGroups 2 }
+
+fxsReboot OBJECT-TYPE
+	SYNTAX		Integer32
+	MAX-ACCESS	read-write
+	STATUS		current
+	DESCRIPTION " SET 1 to reboot device "
+::= { fxs72 19 }
+
+tauVoipDvo OBJECT IDENTIFIER        ::= { fxs72 20 }
+
+	tauVoipDvoCallwaiting  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "00..99"
+			::= { tauVoipDvo 1 }
+			
+	tauVoipDvoCtAttended  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 2 }
+			
+	tauVoipDvoCtUnattended  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 3 }
+			
+	tauVoipDvoCfUnconditional  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 4 }
+			
+	tauVoipDvoCfBusy  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 5 }
+			
+	tauVoipDvoCfNoanswer  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 6 }
+			
+	tauVoipDvoCfService  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 7 }
+			
+	tauVoipDvoDoDisturb  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { tauVoipDvo 8 }
+			
+			
+tauSipConfig OBJECT IDENTIFIER        ::= { fxs72 21 }
+
+    sipEnablesip  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 1 }
+			
+	sipObtimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 2 }
+	
+	sipMode  OBJECT-TYPE
+			SYNTAX     ProxyMode
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 3 }
+	
+		sipOptions  OBJECT-TYPE
+			SYNTAX     OptionsHomeServerTest
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 4 }
+		
+		sipKeepalivet  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 5 }
+			
+		sipDomainToReg  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 6 }
+			
+		sipDomain  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 7 }
+			
+		sipRegisterRetryInterval  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 8 }
+
+		sipOutbound  OBJECT-TYPE
+			SYNTAX     OutboundType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 9 }
+			
+		sipInboundProxy  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 10 }
+			
+		sipExpires  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 11 }
+
+		sipAuthentication  OBJECT-TYPE
+			SYNTAX     AuthenticationType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 12 }
+
+		sipUsername  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 13 }
+			
+		sipPassword  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 14 }
+
+		sipProxy0  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 15 }
+			
+		sipRegrar0  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 16 }
+			
+		sipRegistration0  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 17 }
+
+		sipProxy1  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 18 }
+			
+		sipRegrar1  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 19 }
+
+		sipProxy2  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 20 }
+
+		sipRegrar2  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 21 }
+
+		sipProxy3  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 22 }
+			
+		sipRegrar3  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 23 }
+
+		sipProxy4  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 24 }
+			
+		sipRegrar4  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 25 }
+
+	sipDtmfmime  OBJECT-TYPE
+			SYNTAX     DTMFMIMEType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 26 }
+			
+	sipHfmime  OBJECT-TYPE
+			SYNTAX     HookFlashMIMEType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 27 }
+			
+	sipCtWithReplaces  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 28 }
+			
+	sipShortmode  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 29 }
+			
+	sipTransport  OBJECT-TYPE
+			SYNTAX     TypeTransport
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 30 }
+
+	sipSipMtu  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 31 }
+			
+	sip100Rel  OBJECT-TYPE
+			SYNTAX     Type100rel
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 32 }
+			
+	sipUserPhone  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 33 }
+
+	sipUriEscapeHash  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 34 }
+			
+	sipInviteTotalT  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 35 }
+			
+	sipInviteInitT  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 36 }
+			
+	sipCwRingback  OBJECT-TYPE
+			SYNTAX     CwRingbackRingbackAtCallwaiting
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 37 }
+			
+	sipRingbackSdp  OBJECT-TYPE
+			SYNTAX     RemoteRingback
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 38 }
+			
+	sipRingback  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 39 }
+			
+	sipRegistration1  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 40 }
+			
+	sipRegistration2  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 41 }
+			
+	sipRegistration3  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 42 }
+			
+	sipRegistration4  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 43 }
+			
+	sipPRTPstat  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION ""
+			::= { tauSipConfig 44 }
+
+
+
+fxsStatTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF FxsStatEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION " "
+	::= { fxs72 23 }
+
+	fxsStatEntry OBJECT-TYPE
+		SYNTAX		FxsStatEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { fxsPortNumber }
+		::= { fxsStatTable 1 }
+
+		FxsStatEntry ::= SEQUENCE {
+			termID Integer32,
+			currentState FxsPortState,
+			totalCallCount Integer32,
+			lastCallPhone DisplayString,
+			peakJitter Integer32,
+			lostPackets Integer32,
+			numTxPack Integer32,
+			numTxOct Integer32,
+			numRxPack Integer32,
+			numRxOct Integer32
+		}
+
+		termID  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 1 }
+			
+		currentState  OBJECT-TYPE
+			SYNTAX     FxsPortState
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 2 }
+			
+		totalCallCount  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 3 }
+			
+		lastCallPhone  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 4 }
+			
+		peakJitter  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 5 }
+			
+		lostPackets  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 6 }
+			
+		numTxPack  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 7 }
+			
+		numTxOct  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 8 }
+			
+		numRxPack  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 9 }
+			
+		numRxOct  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxsStatEntry 10 }
+			
+fxsUpdateFw OBJECT-TYPE
+	SYNTAX		DisplayString
+	MAX-ACCESS	read-write
+	STATUS		current
+	DESCRIPTION "SET: filename tftpaddr"
+::= { fxs72 25 }
+
+fxsProfiles OBJECT IDENTIFIER       ::= { fxs72 30 }
+
+profilesSip OBJECT IDENTIFIER       ::= { fxsProfiles 1 }
+
+profilesSipCommon OBJECT IDENTIFIER       ::= { profilesSip 1 }
+    
+    sipCommonEnablesip  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipCommon 1 }
+
+	sipCommonShortmode  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipCommon 2 }
+			
+	sipCommonTransport  OBJECT-TYPE
+			SYNTAX     TypeTransport
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipCommon 3 }
+
+	sipCommonSipMtu  OBJECT-TYPE
+			SYNTAX     Integer32 (1300..1450)
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipCommon 4 }
+
+	sipCommonInviteTotalT  OBJECT-TYPE
+			SYNTAX     Integer32 (1000..39000)
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipCommon 5 }
+			
+	sipCommonInviteInitT  OBJECT-TYPE
+			SYNTAX     Integer32 (100..1000)
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipCommon 6 }
+			
+	sipCommonPortRegistrationDelay OBJECT-TYPE
+			SYNTAX     Integer32 (0..5000)
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Port registration delay (ms)"
+			DEFVAL     { 500 }
+			::= { profilesSipCommon 7 }
+			
+	stunEnable OBJECT-TYPE
+		SYNTAX TruthValue
+		MAX-ACCESS read-write
+		STATUS current
+		DESCRIPTION
+			" "
+		::= { profilesSipCommon 8 }
+        
+    stunServer OBJECT-TYPE
+		SYNTAX DisplayString 
+		MAX-ACCESS read-write
+		STATUS current
+		DESCRIPTION
+			"max 49 symbols"
+		::= {  profilesSipCommon 9 }
+					
+    stunInterval OBJECT-TYPE
+		SYNTAX Integer32 (10..1800)
+		MAX-ACCESS read-write
+		STATUS current
+		DESCRIPTION
+			" "
+		::= {  profilesSipCommon 10 }
+		
+	sipPublicIp OBJECT-TYPE
+		SYNTAX DisplayString 
+		MAX-ACCESS read-write
+		STATUS current
+		DESCRIPTION
+			"IPv4 address"
+		::= {  profilesSipCommon 11 }
+			
+profilesSipMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { profilesSip 2 }
+
+
+profilesSipTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF ProfilesSipEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION " "
+	::= { profilesSip 3 }
+
+		profilesSipEntry OBJECT-TYPE
+		SYNTAX		ProfilesSipEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { profileNumber }
+		::= { profilesSipTable 1 }
+
+		ProfilesSipEntry ::= SEQUENCE {
+			profileNumber Integer32,
+			sipProfileObtimeout  Integer32,
+			sipProfileMode  ProxyMode,
+			sipProfileOptions  OptionsHomeServerTest,
+			sipProfileKeepalivet  Integer32,
+			sipProfileDomainToReg  TruthValue,
+			sipProfileDomain DisplayString,
+			sipProfileRegisterRetryInterval  Integer32,
+			sipProfileOutbound  OutboundType,
+			sipProfileInboundProxy  TruthValue,
+			sipProfileExpires  Integer32,
+			sipProfileAuthentication  AuthenticationType,
+			sipProfileUsername  DisplayString,
+			sipProfilePassword  DisplayString,
+			sipProfileProxy0  DisplayString,
+			sipProfileRegrar0  DisplayString,
+			sipProfileRegistration0  TruthValue,
+			sipProfileProxy1  DisplayString,
+			sipProfileRegrar1  DisplayString,
+			sipProfileProxy2  DisplayString,
+			sipProfileRegrar2  DisplayString,
+			sipProfileProxy3  DisplayString,
+			sipProfileRegrar3  DisplayString,
+			sipProfileProxy4  DisplayString,
+			sipProfileRegrar4  DisplayString,
+			sipProfileDtmfmime  DTMFMIMEType,
+			sipProfileHfmime  HookFlashMIMEType,
+			sipProfileCtWithReplaces  TruthValue,
+			sipProfile100Rel  Type100rel,
+			sipProfileUserPhone  TruthValue,
+			sipProfileUriEscapeHash  TruthValue,
+			sipProfileCwRingback  CwRingbackRingbackAtCallwaiting,
+			sipProfileRingbackSdp  RemoteRingback,
+			sipProfileRingback  TruthValue,
+			sipProfileRegistration1  TruthValue,
+			sipProfileRegistration2  TruthValue,
+			sipProfileRegistration3  TruthValue,
+			sipProfileRegistration4  TruthValue,
+			sipProfilePRTPstat  TruthValue,
+			sipProfileRowStatus RowStatus,
+			sipProfileEnableTimer TruthValue,
+			sipProfileMinSE Integer32,
+			sipProfileSessionExpires Integer32,
+			sipProfileRemoveInactiveMedia TruthValue,
+			sipProfileKeepAliveInterval Integer32,
+			sipProfileKeepAliveMode KeepAliveMode,
+			sipProfileConferenceMode ConferenceMode,
+			sipProfileConferenceServer DisplayString,
+			sipProfileEnableIMS IMSMode,
+			sipProfileXCAPNameForThreePartyConference DisplayString,
+			sipProfileXCAPNameForHotline DisplayString,
+			sipProfileXCAPNameForCallWaiting DisplayString,
+			sipProfileXCAPNameForCallHold DisplayString,
+			sipProfileXCAPNameForExplicitCallTransfer DisplayString,
+			sipProfileUseAlertInfo TruthValue,
+			sipProfileFullRuriCompliance TruthValue,
+			sipProfileChangeover SipProfileChangeoverType
+		}
+		
+		profileNumber OBJECT-TYPE
+			SYNTAX     Integer32 (1..8)
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 1 }
+	
+	sipProfileObtimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 2 }
+	
+	sipProfileMode  OBJECT-TYPE
+			SYNTAX     ProxyMode
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 3 }
+	
+		sipProfileOptions  OBJECT-TYPE
+			SYNTAX     OptionsHomeServerTest
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 4 }
+		
+		sipProfileKeepalivet  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 5 }
+			
+		sipProfileDomainToReg  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 6 }
+			
+		sipProfileDomain  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 7 }
+
+		sipProfileRegisterRetryInterval  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 8 }
+
+		sipProfileOutbound  OBJECT-TYPE
+			SYNTAX     OutboundType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 9 }
+			
+		sipProfileInboundProxy  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 10 }
+			
+		sipProfileExpires  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 11 }
+
+		sipProfileAuthentication  OBJECT-TYPE
+			SYNTAX     AuthenticationType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 12 }
+
+		sipProfileUsername  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 13 }
+			
+		sipProfilePassword  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 14 }
+
+		sipProfileProxy0  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 15 }
+			
+		sipProfileRegrar0  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 16 }
+			
+		sipProfileRegistration0  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 17 }
+
+		sipProfileProxy1  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 18 }
+			
+		sipProfileRegrar1  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 19 }
+
+		sipProfileProxy2  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 20 }
+
+		sipProfileRegrar2  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 21 }
+
+		sipProfileProxy3  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 22 }
+			
+		sipProfileRegrar3  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 23 }
+
+		sipProfileProxy4  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 24 }
+			
+		sipProfileRegrar4  OBJECT-TYPE
+			SYNTAX     DisplayString (SIZE (0..128))
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2.13 - 128 symbols"
+			::= { profilesSipEntry 25 }
+
+	sipProfileDtmfmime  OBJECT-TYPE
+			SYNTAX     DTMFMIMEType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 26 }
+			
+	sipProfileHfmime  OBJECT-TYPE
+			SYNTAX     HookFlashMIMEType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 27 }
+			
+	sipProfileCtWithReplaces  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 28 }
+	
+	sipProfile100Rel  OBJECT-TYPE
+			SYNTAX     Type100rel
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 32 }
+			
+	sipProfileUserPhone  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 33 }
+
+	sipProfileUriEscapeHash  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 34 }
+
+	sipProfileCwRingback  OBJECT-TYPE
+			SYNTAX     CwRingbackRingbackAtCallwaiting
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 37 }
+			
+	sipProfileRingbackSdp  OBJECT-TYPE
+			SYNTAX     RemoteRingback
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 38 }
+			
+	sipProfileRingback  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 39 }
+			
+	sipProfileRegistration1  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 40 }
+			
+	sipProfileRegistration2  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 41 }
+			
+	sipProfileRegistration3  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 42 }
+			
+	sipProfileRegistration4  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 43 }
+			
+	sipProfilePRTPstat  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 44 }
+			
+	sipProfileRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesSipEntry 45 }
+			
+			
+	sipProfileEnableTimer  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Enable timer"
+			::= { profilesSipEntry 46 }
+	
+	sipProfileMinSE  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Min SE 90..1800 def 120"
+			::= { profilesSipEntry 47 }
+	
+	sipProfileSessionExpires  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "SessionExpires 90..80000 or 0 def 0"
+			::= { profilesSipEntry 48 } 
+	
+	sipProfileRemoveInactiveMedia  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Remove inactive media"
+			::= { profilesSipEntry 49 }
+			
+	sipProfileKeepAliveInterval  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "keep alive interval 30..120 def 30. TAU-SIP 2.7"
+			::= { profilesSipEntry 50 } 
+			
+	sipProfileKeepAliveMode  OBJECT-TYPE
+			SYNTAX     KeepAliveMode
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "type of the keep alive message. TAU-SIP 2.7"
+			::= { profilesSipEntry 51 }
+	
+	-- conference settings
+			
+	sipProfileConferenceMode  OBJECT-TYPE
+			SYNTAX     ConferenceMode
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Conference mode. TAU-SIP 2.8"
+			::= { profilesSipEntry 52 }
+	sipProfileConferenceServer  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Conference server name. TAU-SIP 2.8"
+			::= { profilesSipEntry 53 }
+	
+	-- IMS settings
+			
+	sipProfileEnableIMS  OBJECT-TYPE
+			SYNTAX     IMSMode
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Enable IMS. TAU-SIP 2.8 TruthValue
+							TAU-SIP 2.10 IMSMode"
+			::= { profilesSipEntry 54 }
+	sipProfileXCAPNameForThreePartyConference  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "XCAP name for three-party conference. TAU-SIP 2.8"
+			::= { profilesSipEntry 55 }
+	sipProfileXCAPNameForHotline  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "XCAP name for hotline. TAU-SIP 2.8"
+			::= { profilesSipEntry 56 }
+	sipProfileXCAPNameForCallWaiting  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "XCAP name for call waiting. TAU-SIP 2.8"
+			::= { profilesSipEntry 57 }
+	sipProfileXCAPNameForCallHold  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "XCAP name for call hold. TAU-SIP 2.8"
+			::= { profilesSipEntry 58 }
+			
+	sipProfileXCAPNameForExplicitCallTransfer  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "XCAP name for explicit call transfer. TAU-SIP 2.10"
+			::= { profilesSipEntry 59 }
+			
+	sipProfileUseAlertInfo OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Alert-Info"
+			::= { profilesSipEntry 60 }
+			
+	sipProfileFullRuriCompliance OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Full RURI compliance. TAU-SIP 2.12"
+			::= { profilesSipEntry 61 }
+			
+	sipProfileChangeover OBJECT-TYPE
+			SYNTAX     SipProfileChangeoverType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Changeover mode. TAU-SIP 2.12"
+			::= { profilesSipEntry 62 }
+
+profilesSipAlertInfoMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { profilesSip 4 }	
+			
+profilesSipAlertInfoTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF ProfilesSipAlertInfoEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION " "
+	::= { profilesSip 5 }
+
+	profilesSipAlertInfoEntry OBJECT-TYPE
+		SYNTAX		ProfilesSipAlertInfoEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { profileNumber, cadenceNumber }
+		::= { profilesSipAlertInfoTable 1 }
+
+		ProfilesSipAlertInfoEntry ::= SEQUENCE {
+			cadenceNumber Integer32,
+			cadenceName DisplayString,
+			cadenceRingRule DisplayString,
+			cadenceRowStatus RowStatus }	
+			
+			cadenceNumber  OBJECT-TYPE
+				SYNTAX     Integer32 (1..16)
+				MAX-ACCESS	not-accessible
+				STATUS     current
+				DESCRIPTION ""
+				::= { profilesSipAlertInfoEntry 1 }
+			
+			cadenceName  OBJECT-TYPE
+				SYNTAX     DisplayString
+				MAX-ACCESS read-write
+				STATUS     current
+				DESCRIPTION "Alert-Info string (max len 30)"
+				::= { profilesSipAlertInfoEntry 2 }
+			
+			cadenceRingRule  OBJECT-TYPE
+				SYNTAX     DisplayString
+				MAX-ACCESS read-write
+				STATUS     current
+				DESCRIPTION "Distinctive Ring rule (max len 71)
+					string of values (200-16000) devided by ',' or ';'
+					allowed 2,4,6,8,10,12 elements"
+				::= { profilesSipAlertInfoEntry 3 }
+			
+			cadenceRowStatus  OBJECT-TYPE
+				SYNTAX     RowStatus
+				MAX-ACCESS read-create	
+				STATUS     current
+				DESCRIPTION ""
+				::= { profilesSipAlertInfoEntry 4 }			
+			
+			
+profilesPortsMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxsProfiles 2 }
+
+profilesPorts OBJECT IDENTIFIER     ::= { fxsProfiles 3 }
+
+profilesPortsTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF ProfilesPortsEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION " "
+	::= { profilesPorts 1 }
+
+		profilesPortsEntry OBJECT-TYPE
+		SYNTAX		ProfilesPortsEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { profileNumber }
+		::= { profilesPortsTable 1 }
+
+		ProfilesPortsEntry ::= SEQUENCE {
+			profilePortsPlaymoh  TruthValue,
+			profilePortsAON  FxsAON,
+			profilePortsAONHideDate  TruthValue,
+			profilePortsAONHideName  TruthValue,
+			profilePortsTaxophone  FxsTaxophoneType,
+			profilePortsMinFlashtime  Integer32,
+			profilePortsMaxFlashtime  Integer32,
+			profilePortsGainr  Integer32,
+			profilePortsGaint  Integer32,
+			profilePortsCategory  Integer32,
+			profilePortsCallTransfer  FxsProcessFlashType,
+			profilePortsCallWaiting TruthValue,
+			profilePortsCfgPriOverCw TruthValue,
+			profilePortsFxoFlashTime Integer32,
+			profilePortsFxoDelTdm Integer32,
+			profilePortsFxoRingtdm Integer32,
+			profilePortsPstnNumberprefix DisplayString,
+			profilePortsPstnNameprefix DisplayString,
+			profilePortsUsePstnCid TruthValue,
+			profilePortsEnableCpc TruthValue,
+			profilePortsCpcTime Integer32,
+			profilePortsDontDetectDT TruthValue,
+	        profilePortsDelayDialingTimeout Integer32,
+			profilePortsDialing  FxoDialingType,
+			profilePortsTransmitNumber  TruthValue,
+			profilePortsDontTransmitPrefix TruthValue,
+			profilePortsRowStatus RowStatus,
+			profilePortsDialToneDetectionParameters FxsToneParametrs,
+			profilePortsRingBackToneDetectionParameters FxsToneParametrs,
+			profilePortsBusyToneDetectionParameters FxsToneParametrs,
+			profilePortsDtDetectTime Integer32,
+			profilePortsDecadePulseTime Integer32,
+			profilePortsDecadePauseTime Integer32,
+			profilePortsFxoCallBusy TruthValue,
+			profilePortsCpcRus Integer32,
+			profilePortsReversalPolarityAction ReversalPolarityAction,
+			profilePortsPstnActivity PstnActivityType,
+			profilePortsPstnRbDetectTimeout Integer32,
+			profilePortsDetectFxoLinePresence TruthValue,
+			profilePortsBlockFxoLineInOutgoingDirection TruthValue,
+			profilePortsStopDial TruthValue,
+			profilePortsFxoMinLevelDetect Integer32,
+			profilePortsModifier Integer32
+		}
+		
+		profilePortsPlaymoh  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 1 }
+
+		profilePortsAON  OBJECT-TYPE
+			SYNTAX     FxsAON
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 2 }
+			
+		profilePortsAONHideDate  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 3 }
+			
+		profilePortsAONHideName  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 4 }
+
+		profilePortsTaxophone  OBJECT-TYPE
+			SYNTAX     FxsTaxophoneType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 5 }
+
+		profilePortsMinFlashtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "70-2000(from v2.8),1000(to v2.7)"
+			::= { profilesPortsEntry 6 }
+
+		profilePortsMaxFlashtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "70-2000(from v2.8),1000(to v2.7)"
+			::= { profilesPortsEntry 7 }
+
+		profilePortsGainr  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 8 }
+
+		profilePortsGaint  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 9 }
+
+		profilePortsCategory  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 10 }
+
+		profilePortsCallTransfer  OBJECT-TYPE
+			SYNTAX     FxsProcessFlashType
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { profilesPortsEntry 11 }
+
+		profilePortsCallWaiting  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION " "
+			::= { profilesPortsEntry 12 }
+			
+		profilePortsCfgPriOverCw OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 13 }
+			
+		profilePortsFxoFlashTime OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "70 1000 def 300 ms"
+			::= { profilesPortsEntry 14 }
+			
+		profilePortsFxoDelTdm OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "100 1000 def 200 ms"
+			::= { profilesPortsEntry 15 }
+			
+		profilePortsFxoRingtdm OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2 10 def 2"
+			::= { profilesPortsEntry 16 }
+			
+		profilePortsPstnNumberprefix OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "max len 20. allowed symbols 0-9A-Za-z*#_+!~$-"
+			::= { profilesPortsEntry 17 }
+			
+		profilePortsPstnNameprefix OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "max len 20 "
+			::= { profilesPortsEntry 18 }
+			
+		profilePortsUsePstnCid OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 19 }
+			
+		profilePortsEnableCpc OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 20 }
+			
+		profilePortsCpcTime OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 21 }
+			
+		profilePortsDontDetectDT OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "def false"
+			::= { profilesPortsEntry 22 }
+			
+        profilePortsDelayDialingTimeout OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "0-10 ms def 2"
+			::= { profilesPortsEntry 23 }
+			
+		profilePortsDialing  OBJECT-TYPE
+			SYNTAX     FxoDialingType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 24 }
+			
+		profilePortsTransmitNumber  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 25 }
+			
+		profilePortsDontTransmitPrefix OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 26 }
+			
+		profilePortsRowStatus OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 27 }
+			
+		profilePortsDialToneDetectionParameters OBJECT-TYPE
+			SYNTAX     FxsToneParametrs
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "FXO only"
+			::= { profilesPortsEntry 28 }
+		
+		profilePortsRingBackToneDetectionParameters OBJECT-TYPE
+			SYNTAX     FxsToneParametrs
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "FXO only"
+			::= { profilesPortsEntry 29 }
+		
+		profilePortsBusyToneDetectionParameters OBJECT-TYPE
+			SYNTAX     FxsToneParametrs
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "FXO only"
+			::= { profilesPortsEntry 30 }
+		
+		profilePortsDtDetectTime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 31 }
+		
+		profilePortsDecadePulseTime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 32 }
+		
+		profilePortsDecadePauseTime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 33 }
+			
+		profilePortsFxoCallBusy  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Only for FXO. Send '503 Service unavailable' on busy (SIP)"
+			::= { profilesPortsEntry 34 }
+			
+		profilePortsCpcRus OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "1..10 or 0 (off)"
+			::= { profilesPortsEntry 35 }
+			
+		profilePortsReversalPolarityAction OBJECT-TYPE
+			SYNTAX     ReversalPolarityAction
+			MAX-ACCESS read-write
+			STATUS     obsolete
+			DESCRIPTION "FXO port only. TAU-SIP 2.9. Deprecated by PstnActivity"
+			::= { profilesPortsEntry 36 }
+			
+		profilePortsPstnActivity  OBJECT-TYPE
+			SYNTAX     PstnActivityType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. TAU-SIP 2.9. pstn_200_at_answer"
+			::= { profilesPortsEntry 37 }
+			
+		profilePortsPstnRbDetectTimeout  OBJECT-TYPE
+			SYNTAX     Integer32 (1..60)
+			UNITS	   "sec"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "only for FXO. TAU-SIP 2.9"
+			::= { profilesPortsEntry 38 }
+
+		profilePortsDetectFxoLinePresence  OBJECT-TYPE
+			SYNTAX     TruthValue	
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "TAU-SIP 2.10. FXO only"
+			::= { profilesPortsEntry 39 }
+			
+		profilePortsBlockFxoLineInOutgoingDirection  OBJECT-TYPE
+			SYNTAX     TruthValue	
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "TAU-SIP 2.10. FXO only"
+			::= { profilesPortsEntry 40 }
+			
+		profilePortsStopDial OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesPortsEntry 41 }
+
+		profilePortsFxoMinLevelDetect  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Minimum level of detectable signal (dBm): -40..-20 (def -36)
+				TAU-SIP 2.10. FXO only"
+			::= { profilesPortsEntry 42 }
+
+		profilePortsModifier  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "modifierNumber (1..16) at modifiersTable or -1=off
+				TAU-SIP 2.12"
+			::= { profilesPortsEntry 43 }
+			
+			
+			
+profilesDialPlansMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxsProfiles 4 }
+
+profilesDialPlans OBJECT IDENTIFIER ::= { fxsProfiles 5 }
+
+profilesDialPlansTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF ProfilesDialPlansEntry
+	MAX-ACCESS        not-accessible
+	STATUS                current
+	DESCRIPTION " "
+	::= { profilesDialPlans 1 }
+
+		profilesDialPlansEntry OBJECT-TYPE
+		SYNTAX		ProfilesDialPlansEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { profileNumber, profileDialPlanNumber }
+		::= { profilesDialPlansTable 1 }
+
+		ProfilesDialPlansEntry ::= SEQUENCE {
+			profileDialPlanHost				DisplayString,
+			profileDialPlanDigits			DisplayString,
+			profileDialPlanTimeout			Integer32,
+			profileDialPlanMinDigits		Integer32,
+			profileDialPlanType				FxsDialPlanType,
+			profileDialPlanAccessMask		DisplayString,
+			profileDialPlanDialtone			TruthValue,
+			profileDialPlanModifier			DisplayString,
+			profileDialPlanNature			FxsDialPlanNatureType,
+			profileDialPlanDelnum			Integer32,
+			profileDialPlanPtime 			Integer32,
+			profileDialRowStatus			RowStatus,
+			profileDialPlanNumber			Integer32
+		}
+
+		profileDialPlanHost  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 1 }
+			
+		profileDialPlanDigits  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 2 }
+			
+		profileDialPlanTimeout  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 3 }
+			
+		profileDialPlanMinDigits  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 4 }
+			
+		profileDialPlanType  OBJECT-TYPE
+			SYNTAX     FxsDialPlanType
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 5 }
+			
+		profileDialPlanAccessMask  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 6 }
+			
+		profileDialPlanDialtone  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 7 }
+			
+		profileDialPlanModifier  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 8 }
+			
+		profileDialPlanNature  OBJECT-TYPE
+			SYNTAX     FxsDialPlanNatureType
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 9 }
+			
+		profileDialPlanDelnum  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 10 }
+			
+		profileDialPlanPtime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 11 }
+
+		profileDialRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 12 }
+			
+		profileDialPlanNumber  OBJECT-TYPE
+			SYNTAX     Integer32 (1..300)
+			MAX-ACCESS not-accessible
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesDialPlansEntry 13 }
+			
+profilesRegExpDPTableMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { profilesDialPlans 2 }
+			
+profilesRegExpDPTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF ProfilesRegExpDPEntry
+	MAX-ACCESS        not-accessible
+	STATUS                current
+	DESCRIPTION " "
+	::= { profilesDialPlans 3 }
+
+		profilesRegExpDPEntry OBJECT-TYPE
+		SYNTAX		ProfilesRegExpDPEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { profileNumber }
+		::= { profilesRegExpDPTable 1 }
+
+		ProfilesRegExpDPEntry ::= SEQUENCE {
+			profileRegExpDialOn  TruthValue,
+			profileRegExpDialProtocol  TauDialProtocolType,
+			profileRegExpDialText  OCTET STRING,
+			profileRegExpDialRowStatus RowStatus
+		}
+		
+	profileRegExpDialOn  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesRegExpDPEntry 1 }
+			
+	profileRegExpDialProtocol  OBJECT-TYPE
+			SYNTAX     TauDialProtocolType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesRegExpDPEntry 2 }
+			
+	profileRegExpDialText  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesRegExpDPEntry 3 }
+			
+	profileRegExpDialRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesRegExpDPEntry 4 }
+			
+			
+profilesCodecs OBJECT IDENTIFIER ::= { fxsProfiles 7 }
+
+profilesCodecsTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF ProfilesCodecsEntry
+	MAX-ACCESS        not-accessible
+	STATUS                current
+	DESCRIPTION " "
+	::= { profilesCodecs 1 }
+
+		profilesCodecsEntry OBJECT-TYPE
+		SYNTAX		ProfilesCodecsEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { profileNumber }
+		::= { profilesCodecsTable 1 }
+
+		ProfilesCodecsEntry ::= SEQUENCE {
+			useG711A Integer32,
+			useG711U Integer32,
+			useG726to32 Integer32,
+			useG723 Integer32,
+			useG729B Integer32,
+			useG729A Integer32,
+			g711Ptime Integer32,
+			g729Ptime Integer32,
+			g723Ptime Integer32,
+			g726to32Ptime Integer32,
+			g726to32PT Integer32,	
+			dtmfTransfer TauDtmfTransferType,
+			flashTransfer TauFlashTransferType,
+			faxDetectDirection TauFaxDirectionType,
+			faxTransferCodec TauFaxTransferType,
+			slaveFaxTransferCodec TauFaxTransferSlaveType,
+			modemTransfer TauModemTransferType,
+			rfc2833PT Integer32,	
+			silenceSuppression TruthValue,	
+			echoCanceller TruthValue, 	
+			nlpDisable TruthValue, 	
+			comfortNoise TruthValue,
+			rtcpTimer Integer32,	 
+			rtcpControlPeriod Integer32,	 
+			ciscoNsePT Integer32,	
+			t38MaxDatagramSize Integer32, 	
+			t38Bitrate Integer32,
+			modemFaxDelay Integer32,
+			voiceMode TauVoiceModeType,
+			voiceDelayMin Integer32,
+			voiceDelayMax Integer32,
+			voiceDeletionThreshold Integer32,
+			voiceDeletionMode TauvoiceDeletionModeType,
+			profilesCodecsRowStatus RowStatus,
+			rtcpXR TruthValue,
+			rfc3264PtCommon TruthValue
+		}
+					
+		--Codecs configuration:
+		--List of codecs in preffered order:
+		
+		useG711A  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "order by 1 to N or 0(not use)"
+			::= { profilesCodecsEntry 1 }
+			
+		useG711U  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "order by 1 to N or 0(not use)"
+			::= { profilesCodecsEntry 2 }
+				
+		useG726to32  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "order by 1 to N or 0(not use)"
+			::= { profilesCodecsEntry 3 }
+					
+		useG723  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "order by 1 to N or 0(not use)"
+			::= { profilesCodecsEntry 4 }
+					
+		useG729B  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "order by 1 to N or 0(not use)"
+			::= { profilesCodecsEntry 6 }
+					
+		useG729A  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "order by 1 to N or 0(not use)"
+			::= { profilesCodecsEntry 7 }
+					
+			
+		--Packet coder time:
+		
+		g711Ptime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "10,20,30..60"
+			::= { profilesCodecsEntry 8 }
+				
+		g729Ptime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "10,20,30..80"
+			::= { profilesCodecsEntry 9 }
+					
+		g723Ptime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "30,60,90"
+			::= { profilesCodecsEntry 10 }
+					
+		g726to32Ptime  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "10,20,30"
+			::= { profilesCodecsEntry 11 }
+					
+		g726to32PT  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "96..127"
+			::= { profilesCodecsEntry 12 }
+					
+		
+		--Features:
+		
+		dtmfTransfer  OBJECT-TYPE
+			SYNTAX     TauDtmfTransferType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 13 }
+				
+		flashTransfer  OBJECT-TYPE
+			SYNTAX     TauFlashTransferType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 14 }
+				
+		faxDetectDirection  OBJECT-TYPE
+			SYNTAX     TauFaxDirectionType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 15 }
+				
+		faxTransferCodec  OBJECT-TYPE
+			SYNTAX     TauFaxTransferType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 16 }
+				
+		slaveFaxTransferCodec  OBJECT-TYPE
+			SYNTAX     TauFaxTransferSlaveType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 17 }
+				
+		modemTransfer  OBJECT-TYPE
+			SYNTAX     TauModemTransferType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 18 }
+				
+		rfc2833PT  OBJECT-TYPE
+			SYNTAX     Integer32 
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "96..127"
+			::= { profilesCodecsEntry 19 }
+					
+		silenceSuppression  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 20 }
+					
+		echoCanceller  OBJECT-TYPE
+			SYNTAX     TruthValue 
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 21 }
+					
+		nlpDisable  OBJECT-TYPE
+			SYNTAX     TruthValue 
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 22 }
+					
+		comfortNoise  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 23 }
+					
+		
+		--RTCP Configuration:
+		
+		rtcpTimer  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "5..65535"
+			::= { profilesCodecsEntry 24 }
+					 
+		rtcpControlPeriod  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2..65535"
+			::= { profilesCodecsEntry 25 }
+					 
+		
+		--Cisco NSE Configuration:
+		
+		ciscoNsePT  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "96..127"
+			::= { profilesCodecsEntry 26 }
+					
+		
+		--T.38 Configuration:
+		
+		t38MaxDatagramSize  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "272..512"
+			::= { profilesCodecsEntry 27 }
+				 	
+		t38Bitrate  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "9600,14400"
+			::= { profilesCodecsEntry 28 }
+				
+		
+		--Jitter buffer Configuration:
+		--Modem/Fax pass-thru:
+		
+		modemFaxDelay  OBJECT-TYPE
+			SYNTAX     Integer32
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "0..200"
+			::= { profilesCodecsEntry 29 }
+				
+				
+		--Voice:
+		
+		voiceMode  OBJECT-TYPE
+			SYNTAX     TauVoiceModeType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 30 }
+				
+		voiceDelayMin  OBJECT-TYPE
+			SYNTAX     Integer32
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "0..200"
+			::= { profilesCodecsEntry 31 }
+				
+		voiceDelayMax  OBJECT-TYPE
+			SYNTAX     Integer32
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "2..200"
+			::= { profilesCodecsEntry 32 }
+				
+		voiceDeletionThreshold  OBJECT-TYPE
+			SYNTAX     Integer32
+			UNITS		"ms"
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "200..500"
+			::= { profilesCodecsEntry 33 }
+				
+		voiceDeletionMode  OBJECT-TYPE
+			SYNTAX     TauvoiceDeletionModeType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 34 }
+			
+		profilesCodecsRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { profilesCodecsEntry 35 }
+
+		--RTCP Configuration (continuation):
+		
+		rtcpXR  OBJECT-TYPE
+			SYNTAX     TruthValue 
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { profilesCodecsEntry 36 }
+			
+		rfc3264PtCommon  OBJECT-TYPE
+			SYNTAX     TruthValue 
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Decoding rfc2833 with PT from answer SDP
+							TAU-SIP 2.9"
+			::= { profilesCodecsEntry 37 }
+				
+				
+tauSnmpConfiguration OBJECT IDENTIFIER ::= { fxs72 31 }
+tauTrapSink  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 1 }
+tauTrapType  OBJECT-TYPE
+			SYNTAX     TauTrapVersion
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "1,2"
+			::= { tauSnmpConfiguration 2 }
+tauSysName  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 3 }
+tauSysContact  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 4 }
+tauSysLocation  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 5 }
+tauRoCommunity  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 6 }
+tauRwCommunity  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 7 }
+tauTrapCommunity  OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 8 }
+
+tauUserV3Name OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 9 }
+tauUserV3Password OBJECT-TYPE
+			SYNTAX     OCTET STRING
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauSnmpConfiguration 10 }
+tauViewV3Type OBJECT-TYPE
+			SYNTAX     TauUserViewType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "1read,2readwrite"
+			::= { tauSnmpConfiguration 11 }
+
+tauRestartSnmp OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "set True to restart snmpd with new snmp-config"
+			::= { tauSnmpConfiguration 12 }
+			
+			
+tauMegacoTrapsTable OBJECT-TYPE
+	SYNTAX                SEQUENCE OF TauMegacoTrapsEntry
+	MAX-ACCESS        not-accessible
+	STATUS                current
+	DESCRIPTION "TAU-MEGACO traps table. also used for SMG SBC MSR"
+	::= { fxs72 32 }
+
+	tauMegacoTrapsEntry OBJECT-TYPE
+		SYNTAX		TauMegacoTrapsEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { tauMegacoTrapId }
+		::= { tauMegacoTrapsTable 1 }
+
+		TauMegacoTrapsEntry ::= SEQUENCE {
+			tauMegacoTrapId		Integer32,
+			tauMegacoTrapType	TauMegacoTrapVersion,
+			tauMegacoTrapHost   DisplayString,
+			tauMegacoTrapCommunity DisplayString,
+			tauMegacoTrapPort Integer32,
+			tauMegacoTrapRowStatus RowStatus }
+			
+		
+		tauMegacoTrapId  OBJECT-TYPE
+			SYNTAX     Integer32 (1..100)
+			MAX-ACCESS not-accessible
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauMegacoTrapsEntry 1 }
+			
+		tauMegacoTrapType  OBJECT-TYPE
+			SYNTAX     TauMegacoTrapVersion
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauMegacoTrapsEntry 2 }
+			
+		tauMegacoTrapHost  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauMegacoTrapsEntry 3 }
+			
+		tauMegacoTrapCommunity  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauMegacoTrapsEntry 4 }
+			
+		tauMegacoTrapPort  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauMegacoTrapsEntry 5 }
+			
+		tauMegacoTrapRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION ""
+			::= { tauMegacoTrapsEntry 6 }
+
+
+fxoSerialGroups OBJECT IDENTIFIER ::= { fxs72 34 }
+
+	fxoSerialGroupsTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FxoSerialGroupsEntry
+	    MAX-ACCESS  not-accessible
+	    STATUS      current
+	    DESCRIPTION " "
+	::= { fxoSerialGroups 1 }
+
+		fxoSerialGroupsEntry OBJECT-TYPE
+		    SYNTAX		FxoSerialGroupsEntry
+		    MAX-ACCESS  not-accessible
+		    STATUS		current
+	    	DESCRIPTION " "
+		    INDEX       { fxsDialPlanNumber }
+		::= { fxoSerialGroupsTable 1 }
+
+		FxoSerialGroupsEntry ::= SEQUENCE {
+			fxoSerialGroupsPhone		        DisplayString,
+			fxoSerialGroupsEnabled		        Integer32,
+			fxoSerialGroupsBusyType		        FxoGroupBusyType,
+			fxoSerialGroupsSipPort 	            Integer32,
+			fxoSerialGroupsAuthName 	        DisplayString,
+			fxoSerialGroupsAuthPass 	        DisplayString,
+			fxoSerialGroupsPorts 		        DisplayString,
+			fxoSerialGroupsSipProfile           Integer32,
+			fxoSerialGroupsTransmitNumber       TruthValue,
+			fxoSerialGroupsDontTransmitPrefix   TruthValue,
+			fxoSerialGroupsRowStatus	        RowStatus,
+			fxoSerialGroupsSend503OnBusy   		TruthValue,
+			fxoSerialGroupsType					FxoGroupType
+		}
+
+		fxoSerialGroupsPhone  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 1 }
+			
+		fxoSerialGroupsEnabled  OBJECT-TYPE
+			SYNTAX     FxsGroupSerialEnableType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 2 }
+			
+		fxoSerialGroupsBusyType  OBJECT-TYPE
+			SYNTAX     FxoGroupBusyType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 3 }
+			
+		fxoSerialGroupsSipPort  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 4 }
+			
+		fxoSerialGroupsAuthName  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+
+			::= { fxoSerialGroupsEntry 5 }
+			
+		fxoSerialGroupsAuthPass  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 6 }
+			
+		fxoSerialGroupsPorts  OBJECT-TYPE
+			SYNTAX     DisplayString
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 7 }
+			
+		fxoSerialGroupsSipProfile  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 8 }
+        
+		fxoSerialGroupsTransmitNumber  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 9 }
+            
+		fxoSerialGroupsDontTransmitPrefix  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 10 }
+			
+		fxoSerialGroupsRowStatus  OBJECT-TYPE
+			SYNTAX     RowStatus
+			MAX-ACCESS read-create
+			STATUS     current
+			DESCRIPTION " "
+			::= { fxoSerialGroupsEntry 11 }
+			
+		fxoSerialGroupsSend503OnBusy  OBJECT-TYPE
+			SYNTAX     TruthValue
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "Send 503 Service unavailable on busy (SIP) 
+							TAU-SIP 2.7"
+			::= { fxoSerialGroupsEntry 12 }
+			
+		fxoSerialGroupsType OBJECT-TYPE
+			SYNTAX     FxoGroupType
+			MAX-ACCESS read-write
+			STATUS     current
+			DESCRIPTION "group type 
+							TAU-SIP 2.9"
+			::= { fxoSerialGroupsEntry 13 }
+	
+	fxsNetwork OBJECT IDENTIFIER ::= { fxs72 35 }
+	
+		fxsAutoupdateSettings OBJECT IDENTIFIER ::= { fxsNetwork 1 }
+		
+			fxsEnableAutoupdate OBJECT-TYPE
+				SYNTAX		TruthValue
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"true if autoupdate enabled, false otherwise"
+			::= { fxsAutoupdateSettings 1 }
+			
+			fxsSource OBJECT-TYPE
+				SYNTAX		FxsNetworkAutoupdateSourceType
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"dhcp, dhcpVlan1, dhcpVlan2, dhcpVlan3, noDhcp"
+			::= { fxsAutoupdateSettings 2 }
+			
+			fxsTFTPServer OBJECT-TYPE
+				SYNTAX		DisplayString (SIZE (0..128))
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"IP or domain name of tftp server
+							2.13 - 128 symbols"
+			::= { fxsAutoupdateSettings 3 }
+			
+			fxsConfigurationFile OBJECT-TYPE
+				SYNTAX		DisplayString (SIZE (0..80))
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"path to configuration file (tau.dat)"
+			::= { fxsAutoupdateSettings 4 }
+			
+			fxsFirmwareVersion OBJECT-TYPE
+				SYNTAX		DisplayString (SIZE (0..80))
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"path to version file (tau.versions)"
+			::= { fxsAutoupdateSettings 5 }
+			
+			fxsConfigurationUpdateInterval OBJECT-TYPE
+				SYNTAX		Integer32 (0 | 60..65535)
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"configuration update interval (s): 0 - disabled or 60..65535"
+			::= { fxsAutoupdateSettings 6 }
+			
+			fxsFirmwareUpdateInterval OBJECT-TYPE
+				SYNTAX		Integer32 (0 | 60..65535)
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"firmware update interval (s): 0 - disabled or 60..65535"
+			::= { fxsAutoupdateSettings 7 }
+			
+			autoupdateProtocol OBJECT-TYPE
+				SYNTAX		AutoupdateProtocolType
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"tftp|ftp|http|https
+							TAU-SIP 2.12"
+			::= { fxsAutoupdateSettings 8 }
+			
+			autoupdateAuth OBJECT-TYPE
+				SYNTAX		TruthValue
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"TAU-SIP 2.12"
+			::= { fxsAutoupdateSettings 9 }
+			
+			autoupdateUser OBJECT-TYPE
+				SYNTAX		DisplayString (SIZE (0..80))
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"TAU-SIP 2.12"
+			::= { fxsAutoupdateSettings 10 }
+			
+			autoupdatePassword OBJECT-TYPE
+				SYNTAX		DisplayString (SIZE (0..80))
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"TAU-SIP 2.12"
+			::= { fxsAutoupdateSettings 11 }
+			
+			
+		fxsVoipGeneral OBJECT IDENTIFIER ::= { fxs72 37 }
+	
+		fansForceEnable OBJECT-TYPE
+				SYNTAX		TruthValue
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"true if fans ON, false otherwise"
+			::= { fxsVoipGeneral 1 }
+			
+		fansThresholdTemperature OBJECT-TYPE
+				SYNTAX		Integer32 (35..55)
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"fans_threshold_temperature (C): 35..55 default 55"
+			::= { fxsVoipGeneral 2 }
+
+		deviceName OBJECT-TYPE
+				SYNTAX		DisplayString (SIZE (0..128))
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"Device name TAU-SIP 2.9. max 20 symbols
+								2.13 - 128 symbols"
+			::= { fxsVoipGeneral 3 }
+			 	
+		startTimer OBJECT-TYPE
+				SYNTAX		Integer32
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"Start timer (sec, from 10 to 300) TAU-SIP 2.9"
+			::= { fxsVoipGeneral 4 }
+			
+		durationTimer OBJECT-TYPE
+				SYNTAX		Integer32
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"Duration timer (sec, from 10 to 300) TAU-SIP 2.9"
+			::= { fxsVoipGeneral 5 }
+			 
+		waitAnswerTimer OBJECT-TYPE
+				SYNTAX		Integer32
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"Wait answer timer (sec, from 40 to 300) TAU-SIP 2.9"
+			::= { fxsVoipGeneral 6 } 
+			
+		powerMode OBJECT-TYPE
+				SYNTAX		PowerMode
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"TAU-SIP 2.9. for 32M-revB"
+			::= { fxsVoipGeneral 7 } 
+
+		siptUsePrefix OBJECT-TYPE
+				SYNTAX		TruthValue
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"Use prefix (SIP-T) TAU-SIP 2.10"
+			::= { fxsVoipGeneral 8 }
+			
+		siptPrefix OBJECT-TYPE
+				SYNTAX		DisplayString
+				MAX-ACCESS	read-write
+				STATUS		current
+				DESCRIPTION	"Prefix (SIP-T) TAU-SIP 2.10. max 20 symbols"
+			::= { fxsVoipGeneral 9 }
+		
+			
+		fxsSyslog OBJECT IDENTIFIER ::= { fxs72 38 }
+	
+		-- Syslog configuration
+		
+		runSyslog OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               "Run syslog on startup"
+            ::= { fxsSyslog 1 }
+            
+        syslogAddr OBJECT-TYPE
+            SYNTAX DisplayString
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 2 }
+            
+        syslogPort OBJECT-TYPE
+            SYNTAX Integer32
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 3 }
+        
+        -- APPLICATION
+        
+        appAlarm OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " TAU-SIP 2.9"
+            ::= { fxsSyslog 13 } 
+         
+        appErr OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 4 }
+            
+        appWarn OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 5 }
+            
+        appInfo OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 6 }
+            
+        appDbg OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 7 } 
+
+        -- SIP
+         
+        sipLevel OBJECT-TYPE
+            SYNTAX SipLogLevel
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 8 }
+        
+        -- H323
+            
+        h323Level OBJECT-TYPE
+            SYNTAX H323LogLevel
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 9 }
+        
+        -- VAPI
+         
+        vapiEnabled OBJECT-TYPE
+            SYNTAX TruthValue
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 10 }
+         
+        vapiLibLevel OBJECT-TYPE
+            SYNTAX VapiLibLogLevel
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 11 }   
+         
+        vapiAppLevel OBJECT-TYPE
+            SYNTAX VapiAppLogLevel
+            MAX-ACCESS read-write
+            STATUS current
+            DESCRIPTION
+               " "
+            ::= { fxsSyslog 12 }   
+           
+       
+    testPortsTable OBJECT-TYPE
+		SYNTAX SEQUENCE OF TestPortsTableEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION "TAU-SIP 2.7"
+		::= {  fxs72 39 }
+
+		testPortsTableEntry OBJECT-TYPE
+			SYNTAX		TestPortsTableEntry
+			MAX-ACCESS	not-accessible
+			STATUS		current
+			DESCRIPTION " "
+			INDEX { fxsPortNumber }
+			::= { testPortsTable 1 }
+                  
+			TestPortsTableEntry ::= SEQUENCE {
+				portTestTestStatus FxsPortTestStatus,
+
+				portTestTestStartTime Unsigned32,
+				portTestLastTestStartTime Unsigned32,
+				portTestLastTestEndTime Unsigned32,
+
+				portTestResultFlag FxsPortTestFlag,
+				portTestRingU DisplayString,
+				portTestTipU DisplayString,
+				portTestShortVbat DisplayString,
+				portTestResistTr DisplayString,
+				portTestResistTg DisplayString,
+				portTestResistRg DisplayString,
+				portTestCapacityTr DisplayString,
+				portTestCapacityTg DisplayString,
+				portTestCapacityRg DisplayString,
+				
+				portTestRunTest Integer32
+			}
+			
+				portTestTestStatus OBJECT-TYPE
+               		SYNTAX FxsPortTestStatus
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { testPortsTableEntry 1 }
+
+				portTestTestStartTime OBJECT-TYPE
+               		SYNTAX Unsigned32
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "time in sec by epoch"
+               		::= { testPortsTableEntry 2 }
+				portTestLastTestStartTime OBJECT-TYPE
+               		SYNTAX Unsigned32
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "time in sec by epoch"
+               		::= { testPortsTableEntry 3 }
+				portTestLastTestEndTime OBJECT-TYPE
+               		SYNTAX Unsigned32
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "time in sec by epoch"
+               		::= { testPortsTableEntry 4 }
+
+				portTestResultFlag OBJECT-TYPE
+               		SYNTAX FxsPortTestFlag
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { testPortsTableEntry 5 }
+				
+				portTestRingU OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "V"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Ub (External voltage RING)"
+               		::= { testPortsTableEntry 6 }
+				portTestTipU OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "V"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Ua (External voltage TIP)"
+               		::= { testPortsTableEntry 7 }
+				portTestShortVbat OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "V"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Ubat (Short line supply voltage)"
+               		::= { testPortsTableEntry 8 }
+				
+				portTestResistTr OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "kOhm"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Rab (Resist TIP-RING)"
+               		::= { testPortsTableEntry 9 }
+				portTestResistTg OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "kOhm"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Ra (Resist TIP-GND)"
+               		::= { testPortsTableEntry 10 }
+				portTestResistRg OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "kOhm"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Rb (Resist RING-GND)"
+               		::= { testPortsTableEntry 11 }
+				
+				portTestCapacityTr OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "uF"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Cab (Capacity TIP-RING)"
+               		::= { testPortsTableEntry 12 }
+				portTestCapacityTg OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "uF"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Ca (Capacity TIP-GND)"
+               		::= { testPortsTableEntry 13 }
+				portTestCapacityRg OBJECT-TYPE
+               		SYNTAX DisplayString
+               		UNITS "uF"
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION "Cb (Capacity RING-GND)"
+               		::= { testPortsTableEntry 14 }
+				
+				portTestRunTest OBJECT-TYPE
+               		SYNTAX Integer32
+               		MAX-ACCESS read-write
+               		STATUS current
+               		DESCRIPTION "set 1 to run test"
+               		::= { testPortsTableEntry 15 }    
+
+monitorSerialGroupsMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxs72 40 }
+
+monitorSerialGroupsTable OBJECT-TYPE
+		SYNTAX SEQUENCE OF MonitorSerialGroupsEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION "TAU-SIP 2.7"
+		::= {  fxs72 41 }
+
+		monitorSerialGroupsEntry OBJECT-TYPE
+			SYNTAX		MonitorSerialGroupsEntry
+			MAX-ACCESS	not-accessible
+			STATUS		current
+			DESCRIPTION " "
+			INDEX { serialGroupNumber }
+			::= { monitorSerialGroupsTable 1 }
+                  
+			MonitorSerialGroupsEntry ::= SEQUENCE {
+				serialGroupNumber Unsigned32,
+				serialGroupPhone DisplayString,
+				serialGroupRegistrationState GroupRegistrationState,
+				serialGroupRegistrationHost DisplayString,
+				serialGroupLastRegistrationAt DisplayString,
+				serialGroupNextRegistrationAfter DisplayString,
+				serialGroupH323GK DisplayString
+			}
+               		
+            serialGroupNumber OBJECT-TYPE
+               		SYNTAX Unsigned32
+               		MAX-ACCESS not-accessible
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 1 }
+			serialGroupPhone OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 2 }
+			serialGroupRegistrationState OBJECT-TYPE
+               		SYNTAX GroupRegistrationState
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 3 }
+			serialGroupRegistrationHost OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 4 }
+			serialGroupLastRegistrationAt OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 5 }
+			serialGroupNextRegistrationAfter OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 6 }
+			serialGroupH323GK OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorSerialGroupsEntry 7 }
+
+monitorFxoGroupsTable OBJECT-TYPE
+		SYNTAX SEQUENCE OF MonitorFxoGroupsEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION " "
+		::= {  fxs72 42 }
+
+		monitorFxoGroupsEntry OBJECT-TYPE
+			SYNTAX		MonitorFxoGroupsEntry
+			MAX-ACCESS	not-accessible
+			STATUS		current
+			DESCRIPTION "TAU-SIP 2.7"
+			INDEX { fxoGroupNumber }
+			::= { monitorFxoGroupsTable 1 }
+                  
+			MonitorFxoGroupsEntry ::= SEQUENCE {
+				fxoGroupNumber Unsigned32,
+				fxoGroupPhone DisplayString,
+				fxoGroupRegistrationState GroupRegistrationState,
+				fxoGroupRegistrationHost DisplayString,
+				fxoGroupLastRegistrationAt DisplayString,
+				fxoGroupNextRegistrationAfter DisplayString,
+				fxoGroupH323GK DisplayString
+			}
+            
+            fxoGroupNumber OBJECT-TYPE
+               		SYNTAX Unsigned32
+               		MAX-ACCESS not-accessible
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 1 }   		
+			fxoGroupPhone OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 2 }
+			fxoGroupRegistrationState OBJECT-TYPE
+               		SYNTAX GroupRegistrationState
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 3 }
+			fxoGroupRegistrationHost OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 4 }
+			fxoGroupLastRegistrationAt OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 5 }
+			fxoGroupNextRegistrationAfter OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 6 }
+			fxoGroupH323GK OBJECT-TYPE
+               		SYNTAX DisplayString
+               		MAX-ACCESS read-only
+               		STATUS current
+               		DESCRIPTION " "
+               		::= { monitorFxoGroupsEntry 7 }
+
+firewallTableMIBBoundary  OBJECT-TYPE
+			SYNTAX     Integer32
+			MAX-ACCESS read-only
+			STATUS     current
+			DESCRIPTION "Dummy object to prevent GETNEXT request from poking into neighbor table."
+			::= { fxs72 43 }
+
+firewallConfig OBJECT IDENTIFIER ::= { fxs72 44 }
+
+	firewallTable OBJECT-TYPE
+		SYNTAX SEQUENCE OF FirewallEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION "TAU-SIP 2.7"
+		::= {  firewallConfig 1 }
+
+		firewallEntry OBJECT-TYPE
+			SYNTAX		FirewallEntry
+			MAX-ACCESS	not-accessible
+			STATUS		current
+			DESCRIPTION " "
+			INDEX { ruleNumber }
+			::= { firewallTable 1 }
+                  
+			FirewallEntry ::= SEQUENCE {
+				ruleNumber Unsigned32,
+				startingSourceIpAddress DisplayString,
+				numberOfSourceIpAddresses Unsigned32,
+				allSourceIpAddresses TruthValue,
+				ruleprotocol FirewallProtocol,
+				typeOfMessageICMP TypeOfMessageICMP,
+				startingSourcePort Unsigned32,
+				numberOfSourcePorts Unsigned32,
+				allSourcePorts TruthValue,
+				startingDestinationPort Unsigned32,
+				numberOfDestinationPorts Unsigned32 ,
+				allDestinationPorts TruthValue,
+				ruleTarget FirewallTarget,
+				ruleMoveTo Unsigned32,
+				ruleRowStatus RowStatus
+			}
+
+				ruleNumber OBJECT-TYPE
+               		SYNTAX Unsigned32
+					MAX-ACCESS not-accessible
+					STATUS current
+					DESCRIPTION
+						" "
+					::= { firewallEntry 1 }
+
+				startingSourceIpAddress OBJECT-TYPE
+               		SYNTAX DisplayString
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Starting source IP address"
+					::= { firewallEntry 2 }
+				 	
+				numberOfSourceIpAddresses OBJECT-TYPE
+               		SYNTAX Unsigned32
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Number of source IP addresses:"
+					::= { firewallEntry 3 } 
+	
+				allSourceIpAddresses OBJECT-TYPE
+               		SYNTAX TruthValue
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"All source IP addresses"
+					::= { firewallEntry 4 }	
+					
+				ruleprotocol OBJECT-TYPE
+               		SYNTAX FirewallProtocol
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Protocol"
+					::= { firewallEntry 5 }
+					
+				typeOfMessageICMP OBJECT-TYPE
+               		SYNTAX TypeOfMessageICMP
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Type of message (ICMP): for protocol ICMP only"
+					::= { firewallEntry 6 }
+					 		
+				startingSourcePort OBJECT-TYPE
+               		SYNTAX Unsigned32
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Starting source port: from 1 to 65535, for protocols UDP, TCP only"
+					::= { firewallEntry 7 }
+	
+				numberOfSourcePorts OBJECT-TYPE
+               		SYNTAX Unsigned32
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Number of source ports: starting+number<=65535, for protocols UDP, TCP only"
+					::= { firewallEntry 8 }
+
+				allSourcePorts OBJECT-TYPE
+               		SYNTAX TruthValue
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"All source ports: for protocols UDP, TCP only"
+					::= { firewallEntry 9 }
+
+				startingDestinationPort OBJECT-TYPE
+               		SYNTAX Unsigned32
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Starting destination port: from 1 to 65535, for protocols UDP, TCP only"
+					::= { firewallEntry 10 }
+	
+				numberOfDestinationPorts OBJECT-TYPE
+               		SYNTAX Unsigned32 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Number of destination ports: starting+number<=65535, for protocols UDP, TCP only"
+					::= { firewallEntry 11 }
+	
+				allDestinationPorts OBJECT-TYPE
+               		SYNTAX TruthValue
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"All destination ports: for protocols UDP, TCP only"
+					::= { firewallEntry 12 }	
+
+				ruleTarget OBJECT-TYPE
+               		SYNTAX FirewallTarget
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Target"
+					::= { firewallEntry 13 }
+				
+				ruleMoveTo OBJECT-TYPE
+               		SYNTAX Unsigned32 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"set new position of rule (1..30)"
+					::= { firewallEntry 14 }
+					
+				ruleRowStatus OBJECT-TYPE
+               		SYNTAX RowStatus
+               		MAX-ACCESS read-create
+					STATUS current
+					DESCRIPTION
+						" "
+					::= { firewallEntry 15 }
+		
+		firewallApply OBJECT-TYPE
+			SYNTAX Integer32
+			MAX-ACCESS read-write
+			STATUS current
+			DESCRIPTION
+				"set to apply firewall config
+				 it will rollback in ? second without firewallConfirm
+				 TAU-SIP 2.7"
+		::= {  firewallConfig 2 }
+		
+		firewallConfirm OBJECT-TYPE
+			SYNTAX Integer32
+			MAX-ACCESS read-write
+			STATUS current
+			DESCRIPTION
+				"set to confirm firewall config
+				 firewallCommit kill firewallApply-timer
+				 TAU-SIP 2.7"
+		::= {  firewallConfig 3 }
+
+
+
+configTcpIp OBJECT IDENTIFIER ::= { fxs72 45 }
+	
+-- RTP port range (RTP)
+
+rtpSipMin OBJECT-TYPE
+	SYNTAX Integer32(1024..65500)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"RTP SIP min. TAU-SIP 2.9"
+	DEFVAL { 23000 }
+	::= { configTcpIp 1 }
+	
+rtpSipMax OBJECT-TYPE
+	SYNTAX Integer32(1024..65500)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"RTP SIP max. TAU-SIP 2.9"
+	DEFVAL { 23896 }
+	::= { configTcpIp 2 }
+	
+-- Intercept port range
+
+interceptPortMin OBJECT-TYPE
+	SYNTAX Integer32(1024..65500)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"Intercept port min. TAU-SIP 2.9"
+	DEFVAL { 50000 }
+	::= { configTcpIp 3 }
+	
+interceptPortMax OBJECT-TYPE
+	SYNTAX Integer32(1024..65500)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"Intercept port max. TAU-SIP 2.9"
+	DEFVAL { 50100 }
+	::= { configTcpIp 4 }
+	
+-- TOS configuration
+
+diffservForSip OBJECT-TYPE
+	SYNTAX Integer32(0..255)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"Diffserv for SIP. TAU-SIP 2.9"
+	DEFVAL { 104 }
+	::= { configTcpIp 5 }
+	
+diffservForRtp OBJECT-TYPE
+	SYNTAX Integer32(0..255)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"Diffserv for RTP. TAU-SIP 2.9"
+	DEFVAL { 184 }
+	::= { configTcpIp 6 }
+	
+-- Other
+verifyRemoteMediaAddress OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+		"Verify remote media address. TAU-SIP 2.9"
+	DEFVAL { false }
+	::= { configTcpIp 7 }
+	
+
+callLimitTable OBJECT-TYPE
+		SYNTAX SEQUENCE OF CallLimitEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION "TAU-SIP 2.9"
+		::= {  fxs72 46 }
+
+		callLimitEntry OBJECT-TYPE
+			SYNTAX		CallLimitEntry
+			MAX-ACCESS	not-accessible
+			STATUS		current
+			DESCRIPTION " "
+			INDEX { clIndex }
+			::= { callLimitTable 1 }
+                  
+			CallLimitEntry ::= SEQUENCE {
+				clIndex Integer32,
+				clType CallLimitType,
+				clHostOfNeighbourGateway DisplayString,
+				clSimultaneousCallsCount Integer32,
+				clRowStatus RowStatus
+			}
+			
+			clIndex OBJECT-TYPE
+               		SYNTAX Integer32(1..30) 
+					MAX-ACCESS not-accessible
+					STATUS current
+					DESCRIPTION
+						" "
+					::= {  callLimitEntry 1 }
+					
+			clType OBJECT-TYPE
+               		SYNTAX CallLimitType 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"proxy/gk or host"
+					::= {  callLimitEntry 2 }
+					
+			clHostOfNeighbourGateway OBJECT-TYPE
+               		SYNTAX DisplayString 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Host of neighbour gateway. max 255 symbols"
+					::= {  callLimitEntry 3 }
+					
+			clSimultaneousCallsCount OBJECT-TYPE
+               		SYNTAX Integer32 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Simultaneous calls count"
+					::= {  callLimitEntry 4 }
+					
+			clRowStatus OBJECT-TYPE
+               		SYNTAX RowStatus 
+					MAX-ACCESS read-create
+					STATUS current
+					DESCRIPTION
+						" "
+					::= {  callLimitEntry 5 }
+
+
+distinctiveRingTable OBJECT-TYPE
+		SYNTAX SEQUENCE OF DistinctiveRingEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION "TAU-SIP 2.9"
+		::= {  fxs72 47 }
+
+		distinctiveRingEntry OBJECT-TYPE
+			SYNTAX		DistinctiveRingEntry
+			MAX-ACCESS	not-accessible
+			STATUS		current
+			DESCRIPTION " "
+			INDEX { drId }
+			::= { distinctiveRingTable 1 }
+                  
+			DistinctiveRingEntry ::= SEQUENCE {
+				drId Integer32,
+				drRule DisplayString,
+				drRing Integer32,
+				drPause Integer32,
+				drSubscriberProfiles DRSubscriberProfilesType,
+				drRowStatus	RowStatus
+			}
+
+			drId OBJECT-TYPE
+               		SYNTAX Integer32(1..32) 
+					MAX-ACCESS not-accessible
+					STATUS current
+					DESCRIPTION
+						" "
+					::= {  distinctiveRingEntry 1 }
+					
+			drRule OBJECT-TYPE
+               		SYNTAX DisplayString 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Rule. 50 symbol max"
+					::= {  distinctiveRingEntry 2 }
+					
+			drRing OBJECT-TYPE
+               		SYNTAX Integer32 (2..255)
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Ring, x100 msec"
+					::= {  distinctiveRingEntry 3 }
+					
+			drPause OBJECT-TYPE
+               		SYNTAX Integer32 (2..255) 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Pause, x100 msec"
+					::= {  distinctiveRingEntry 4 }
+					
+			drSubscriberProfiles OBJECT-TYPE
+               		SYNTAX DRSubscriberProfilesType 
+					MAX-ACCESS read-write
+					STATUS current
+					DESCRIPTION
+						"Subscriber profiles 1-8, bit mask: 0 bit = 1 profile, 7 bit = 8 profile.
+							more description at DRSubscriberProfilesType"
+					::= {  distinctiveRingEntry 5 }
+					
+			drRowStatus OBJECT-TYPE
+               		SYNTAX RowStatus 
+					MAX-ACCESS read-create
+					STATUS current
+					DESCRIPTION
+						" "
+					::= {  distinctiveRingEntry 6 }
+
+modifiersTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF ModifiersEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION " "
+	::= { fxs72 48 }
+
+	modifiersEntry OBJECT-TYPE
+		SYNTAX		ModifiersEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION " "
+		INDEX { modifierNumber, modifierRule }
+		::= { modifiersTable 1 }
+
+		ModifiersEntry ::= SEQUENCE {
+			modifierNumber Integer32,
+			modifierRule Integer32,
+			modifierDialedNumberRegexpRule DisplayString,	
+			modifierDialedNumberModification DisplayString,	
+			modifierCallingNumberModification DisplayString,
+			modifierRowStatus RowStatus }	
+			
+			modifierNumber  OBJECT-TYPE
+				SYNTAX     Integer32 (1..16)
+				MAX-ACCESS	not-accessible
+				STATUS     current
+				DESCRIPTION ""
+				::= { modifiersEntry 1 }
+			
+			modifierRule  OBJECT-TYPE
+				SYNTAX     Integer32 (1..32)
+				MAX-ACCESS	not-accessible
+				STATUS     current
+				DESCRIPTION ""
+				::= { modifiersEntry 2 }
+			
+			modifierDialedNumberRegexpRule  OBJECT-TYPE
+				SYNTAX     DisplayString
+				MAX-ACCESS read-write
+				STATUS     current
+				DESCRIPTION "Dialed number regexp rule (max len 50)
+					Allowed symbols:
+						- '|' - OR (rule part divider)
+						- 'X', 'x' - any digit, equals to [0-9]
+						- 0-9 - digits from 0 to 9
+						- '*', '#' - symbols
+						- [] - borders of range for this symbol (example: [0-7], [138], [135*#])
+						- {min,max} - min/max symbol repeats (example: 5{2,5})
+						- '.' - previous digit, symbol or range is not mandatory or can has any repeats; exuals to 5{0,} (example: 35.*)
+						- '+' - previous digit, symbol or range can has any repeats; exuals to 5{1,} (example: x5+#)"
+				::= { modifiersEntry 3 }
+				
+			modifierDialedNumberModification  OBJECT-TYPE
+				SYNTAX     DisplayString
+				MAX-ACCESS read-write
+				STATUS     current
+				DESCRIPTION "Dialed number modification (max len 29)
+					Allowed symbols:
+						- '.', '-' - digit removing
+						- 'X', 'x' - digit or symbol on this position is unchanging (mandatory);
+						- '?' - digit or symbol on this position is unchanging (not mandatory);
+						- '+' - next symblos will be added
+						- '!' - end of parsing; all next symbols will be cutted
+						- '$' - end of parsing; all next symbols will be unchanged
+						- 0-9, '#', ‘*’ (without '+') - digit or symbol on this position will be replaced"
+				::= { modifiersEntry 4 }
+					
+			modifierCallingNumberModification  OBJECT-TYPE
+				SYNTAX     DisplayString
+				MAX-ACCESS read-write
+				STATUS     current
+				DESCRIPTION "Calling number modification (max len 29)
+					Allowed symbols like modifierDialedNumberModification"
+				::= { modifiersEntry 5 }
+			
+			modifierRowStatus  OBJECT-TYPE
+				SYNTAX     RowStatus
+				MAX-ACCESS read-create	
+				STATUS     current
+				DESCRIPTION ""
+				::= { modifiersEntry 6 }		
+
+
+
+						
+	
+	tauSubtypes OBJECT IDENTIFIER        ::= { fxs72 90 }
+	tau72sip OBJECT IDENTIFIER        ::= { tauSubtypes 1 }
+	tau36sip OBJECT IDENTIFIER        ::= { tauSubtypes 2 }
+	tau32Msip OBJECT IDENTIFIER        ::= { tauSubtypes 3 }
+	tau72megaco OBJECT IDENTIFIER        ::= { tauSubtypes 4 }
+	tau72v30sip OBJECT IDENTIFIER        ::= { tauSubtypes 5 }
+	tau36v30sip OBJECT IDENTIFIER        ::= { tauSubtypes 6 }
+	fxs72sip OBJECT IDENTIFIER        ::= { tauSubtypes 7 }
+	tau36megaco OBJECT IDENTIFIER        ::= { tauSubtypes 8 }
+	tau72v30megaco OBJECT IDENTIFIER        ::= { tauSubtypes 9 }
+	tau36v30megaco OBJECT IDENTIFIER        ::= { tauSubtypes 10 }
+	fxs72megaco OBJECT IDENTIFIER        ::= { tauSubtypes 11 }
+	fxs72v21 OBJECT IDENTIFIER        ::= { tauSubtypes 12 }
+	tau72v40sip OBJECT IDENTIFIER        ::= { tauSubtypes 13 }
+	tau36v40sip OBJECT IDENTIFIER        ::= { tauSubtypes 14 }
+	tau72v40megaco OBJECT IDENTIFIER        ::= { tauSubtypes 15 }
+	tau36v40megaco OBJECT IDENTIFIER        ::= { tauSubtypes 16 }
+	tau32MrevBsip OBJECT IDENTIFIER ::= { tauSubtypes 17 } -- TAU-32M_1v5
+	tau32Mmegaco OBJECT IDENTIFIER        ::= { tauSubtypes 18 }
+	tau32MrevBmegaco OBJECT IDENTIFIER        ::= { tauSubtypes 19 }
+	tau16sip OBJECT IDENTIFIER        ::= { tauSubtypes 20 }
+	tau24sip OBJECT IDENTIFIER        ::= { tauSubtypes 21 }
+	tau16megaco OBJECT IDENTIFIER        ::= { tauSubtypes 22 }
+	tau24megaco OBJECT IDENTIFIER        ::= { tauSubtypes 23 }
+	
+	
+fxsGroup  OBJECT-GROUP
+	OBJECTS
+	{
+		fxsDevName,
+		fxsDevType,
+		fxsDevCfgBuild,
+		fxsFreeSpace,
+		fxsFreeRam,
+		fxsSSwStatus,
+		fxsSSwStatusTime,
+		fxsCpuUsage,
+
+		fxsMonitoringVMode,
+		fxsMonitoringVBat,
+		fxsMonitoringVRing1,
+		fxsMonitoringVRing2,
+		fxsMonitoringTemp1,
+		fxsMonitoringTemp2,
+		fxsMonitoringTemp3,
+		fxsMonitoringTemp4,
+		fxsMonitoringFanState,
+		fxsMonitoringFan1Rotate,
+		fxsMonitoringFan2Rotate,
+		fxsMonitoringSubCooling,
+		fxsMonitoringVinput,
+		fxsMonitoringDevicePower,
+		
+		fxsPortsMIBBoundary,
+
+		fxsPortPhoneNumber,
+		fxsPortState,
+		fxsPortUserName,
+		fxsPortTalkingNum,
+		fxsPortTalkingStartTime,
+		fxsPortSipConnected,
+		fxsPortH323Connected,
+		fxsPortSipConnecteNext,
+		fxsPortSipConnecteState,
+		fxsPortSipConnectHost,
+		
+		fxsPortConfigPhone,
+		fxsPortConfigUserName,
+		fxsPortConfigAuthName,
+		fxsPortConfigAuthPass,
+		fxsPortConfigCustom,
+		fxsPortConfigPlaymoh,
+		fxsPortConfigAON,
+		fxsPortConfigAONHideDate,
+		fxsPortConfigAONHideName,
+		fxsPortConfigTaxophone,
+		fxsPortConfigMinFlashtime,
+		fxsPortConfigMaxFlashtime,
+		fxsPortConfigGainr,
+		fxsPortConfigGaint,
+		fxsPortConfigCategory,
+		fxsPortConfigCallTransfer,
+		fxsPortConfigCallWaiting,
+		fxsPortConfigHotLine,
+		fxsPortConfigHotNumber,
+		fxsPortConfigHotTimeout,
+		fxsPortConfigDisabled,
+		fxsPortConfigCtBusy,
+		fxsPortConfigCtUnconditional,
+		fxsPortConfigCtNoanswer,
+		fxsPortConfigCtTimeout,
+		fxsPortConfigClir,
+		fxsPortConfigStopDial,
+		fxsPortConfigAltNumber,
+		fxsPortConfigUseAltNumber,
+		fxsPortConfigPickUp,
+		fxsPortConfigSipPort,
+		fxsPortConfigCfgPriOverCw,
+		fxsPortConfigRowStatus,
+		fxsPortConfigDvoCwEn,
+		fxsPortConfigDvoCtAttendedEn,
+		fxsPortConfigDvoCtUnattendedEn,
+		fxsPortConfigDvoUnconditionalEn,
+		fxsPortConfigDvoCfBusyEn,
+		fxsPortConfigDvoCfAnswerEn,
+		fxsPortConfigDvoCfServiceEn,
+		fxsPortConfigDvoDoDisturbEn,
+		fxsPortConfigCtOutofservice,
+		fxsPortConfigCfuNumber,
+		fxsPortConfigCfbNumber,
+		fxsPortConfigCfnrNumber,
+		fxsPortConfigCfoosNumber,
+		fxsPortConfigDnd,
+		fxsPortConfigCtNumber,
+		fxsPortConfigEnableCpc,
+		fxsPortConfigCpcTime,
+		fxsPortConfigFxoFlashTime,
+		fxsPortConfigFxoDelTdm,
+		fxsPortConfigFxoRingtdm,
+		fxsPortConfigPstnNumberprefix,
+		fxsPortConfigPstnNameprefix,
+		fxsPortConfigUsePstnCid,
+		fxsPortConfigtdmhotline,
+		fxsPortConfigtdmhottimeout,
+		fxsPortConfigtdmhotnumber,
+		fxsPortConfigDontDetectDT,
+		fxsPortConfigDelayDialingTimeout,
+		fxsPortType,
+		fxsPortConfigDialing,
+		fxsPortConfigTransmitNumber,
+		fxsPortConfigDontTransmitPrefix,
+		fxsPortConfigPortProfileID,
+		fxsPortConfigSipProfileID,
+		fxsPortConfigDialToneDetectionParameters,
+		fxsPortConfigRingBackToneDetectionParameters,
+		fxsPortConfigBusyToneDetectionParameters,
+		fxsPortConfigDtDetectTime,
+		fxsPortConfigDecadePulseTime,
+		fxsPortConfigDecadePauseTime,
+		fxsPortConfigNoOffhookAtRinging,
+		fxsPortConfigFxoCallBusy,
+		fxsPortConfigCpcRus,
+		fxsPortConfigReversalPolarityAction,
+		fxsPortConfigPstnActivity,
+		fxsPortConfigPstnRbDetectTimeout,
+		fxsPortConfigDetectFxoLinePresence,	
+		fxsPortConfigBlockFxoLineInOutgoingDirection,
+		fxsPortConfigFxoMinLevelDetect,
+		fxsPortConfigUseAltNumberAsContact,
+		fxsPortConfigModifier,
+		fxsPortConfigMwiDialtone,
+		
+		fxsPortConfigCommonPlaymoh,
+		fxsPortConfigCommonAON,
+		fxsPortConfigCommonAONHideDate,
+
+		fxsPortConfigCommonAONHideName,
+		fxsPortConfigCommonTaxophone,
+		fxsPortConfigCommonMinFlashtime,
+		fxsPortConfigCommonMaxFlashtime,
+		fxsPortConfigCommonGainr,
+		fxsPortConfigCommonGaint,
+		fxsPortConfigCommonCategory,
+		fxsPortConfigCommonCallTransfer,
+		fxsPortConfigCommonCallWaiting,
+		fxsPortConfigCommonCfgPriOverCw,
+		fxsPortConfigCommonFxoFlashTime,
+		fxsPortConfigCommonFxoDelTdm,
+		fxsPortConfigCommonFxoRingtdm,
+		fxsPortConfigCommonPstnNumberprefix,
+		fxsPortConfigCommonPstnNameprefix,
+		fxsPortConfigCommonUsePstnCid,
+		fxsPortConfigCommonEnableCpc,
+		fxsPortConfigCommonCpcTime,
+		fxsPortConfigCommonDontDetectDT,
+        fxsPortConfigCommonDelayDialingTimeout,
+        fxsPortConfigCommonDialing,
+		fxsPortConfigCommonTransmitNumber,
+		fxsPortConfigCommonDontTransmitPrefix,
+		
+		fxsDialMIBBoundary,
+
+		fxsDialPlanHost,
+		fxsDialPlanDigits,
+		fxsDialPlanTimeout,
+		fxsDialPlanMinDigits,
+		fxsDialPlanType,
+		fxsDialPlanAccessMask,
+		fxsDialPlanDialtone,
+		fxsDialPlanModifier,
+		fxsDialPlanNature,
+		fxsDialPlanDelnum,
+		fxsDialPlanPtime,
+		fxsDialRowStatus,
+
+		fxsDialPlanNext,
+		
+		tauDialRegularOn,
+		tauDialRegularProtocol,
+		tauDialRegularText,
+
+		fxsConfigSave,
+		fxsConfigApply,
+		
+		fxsSerialGroupsMIBBoundary,
+
+		fxsSerialGroupsPhone,
+		fxsSerialGroupsEnabled,
+		fxsSerialGroupsSerialType,
+		fxsSerialGroupsBusyType,
+		fxsSerialGroupsTimeout,
+		fxsSerialGroupsSipPort,
+
+		fxsSerialGroupsAuthName,
+		fxsSerialGroupsAuthPass,
+		fxsSerialGroupsPorts,
+		fxsSerialGroupsRowStatus,
+		fxsSerialGroupsSipProfile,
+		
+		fxsSerialGroupsNextEmpty,
+		
+		fxsReboot,
+		
+		tauVoipDvoCallwaiting,
+		tauVoipDvoCtAttended,
+		tauVoipDvoCtUnattended,
+		tauVoipDvoCfUnconditional,
+		tauVoipDvoCfBusy,
+		tauVoipDvoCfNoanswer,
+		tauVoipDvoCfService,
+		tauVoipDvoDoDisturb,
+		
+		sipEnablesip,
+		sipObtimeout,
+		sipMode,
+		sipOptions,
+		sipKeepalivet,
+		sipDomainToReg,
+		sipDomain,
+		sipRegisterRetryInterval,
+		sipOutbound,
+		sipInboundProxy,
+		sipExpires,
+		sipAuthentication,
+		sipUsername,
+		sipPassword,
+		sipProxy0,
+		sipRegrar0,
+		sipRegistration0,
+		sipProxy1,
+		sipRegrar1,
+		sipProxy2,
+		sipRegrar2,
+		sipProxy3,
+		sipRegrar3,
+		sipProxy4,
+		sipRegrar4,
+		sipDtmfmime,
+		sipHfmime,
+		sipCtWithReplaces,
+		sipShortmode,
+		sipTransport,
+		sipSipMtu,
+		sip100Rel,
+		sipUserPhone,
+		sipUriEscapeHash,
+		sipInviteTotalT,
+		sipInviteInitT,
+		sipCwRingback,
+		sipRingbackSdp,
+		sipRingback,
+		sipRegistration1,
+		sipRegistration2,
+		sipRegistration3,
+		sipRegistration4,
+		sipPRTPstat,
+		
+		termID,
+		currentState,
+		totalCallCount,
+		lastCallPhone,
+		peakJitter,
+		lostPackets,
+		numTxPack,
+		numTxOct,
+		numRxPack,
+		numRxOct,
+		
+		fxsUpdateFw,
+		
+	   sipCommonEnablesip,
+       sipCommonShortmode,
+       sipCommonTransport,
+       sipCommonSipMtu,
+       sipCommonInviteTotalT,
+       sipCommonInviteInitT,
+       sipCommonPortRegistrationDelay,
+       
+       profilesSipMIBBoundary,
+       
+       profileNumber,
+       sipProfileObtimeout,
+       sipProfileMode,
+       sipProfileOptions,
+       sipProfileKeepalivet,
+       sipProfileDomainToReg,
+       sipProfileRegisterRetryInterval,
+       sipProfileOutbound,
+       sipProfileInboundProxy,
+       sipProfileExpires,
+       sipProfileAuthentication,
+       sipProfileUsername,
+       sipProfilePassword,
+       sipProfileProxy0,
+       sipProfileRegrar0,
+       sipProfileRegistration0,
+       sipProfileProxy1,
+       sipProfileRegrar1,
+       sipProfileProxy2,
+       sipProfileRegrar2,
+       sipProfileProxy3,
+       sipProfileRegrar3,
+       sipProfileProxy4,
+       sipProfileRegrar4,
+       sipProfileDtmfmime,
+       sipProfileHfmime,
+       sipProfileCtWithReplaces,
+       sipProfile100Rel,
+       sipProfileUserPhone,
+       sipProfileUriEscapeHash,
+       sipProfileCwRingback,
+       sipProfileRingbackSdp,
+       sipProfileRingback,
+       sipProfileRegistration1,
+       sipProfileRegistration2,
+       sipProfileRegistration3,
+       sipProfileRegistration4,
+       sipProfilePRTPstat,
+       sipProfileRowStatus,
+       sipProfileDomain,
+       sipProfileEnableTimer,
+       sipProfileMinSE,
+       sipProfileSessionExpires,
+       sipProfileRemoveInactiveMedia,
+       sipProfileKeepAliveInterval,
+	   sipProfileKeepAliveMode,
+	   sipProfileConferenceMode,
+	   sipProfileConferenceServer,
+	   sipProfileEnableIMS,
+	   sipProfileXCAPNameForThreePartyConference,
+	   sipProfileXCAPNameForHotline,
+	   sipProfileXCAPNameForCallWaiting,
+	   sipProfileXCAPNameForCallHold,
+	   sipProfileXCAPNameForExplicitCallTransfer,
+	   sipProfileUseAlertInfo,
+	   sipProfileFullRuriCompliance,
+	   sipProfileChangeover,
+       
+       profilesPortsMIBBoundary,
+       
+       profilePortsPlaymoh,
+       profilePortsAON,
+       profilePortsAONHideDate,
+       profilePortsAONHideName,
+       profilePortsTaxophone,
+       profilePortsMinFlashtime,
+       profilePortsMaxFlashtime,
+       profilePortsGainr,
+       profilePortsGaint,
+       profilePortsCategory,
+       profilePortsCallTransfer,
+       profilePortsCallWaiting,
+       profilePortsCfgPriOverCw,
+       profilePortsFxoFlashTime,
+       profilePortsFxoDelTdm,
+       profilePortsFxoRingtdm,
+       profilePortsPstnNumberprefix,
+       profilePortsPstnNameprefix,
+       profilePortsUsePstnCid,
+       profilePortsEnableCpc,
+       profilePortsCpcTime,
+       profilePortsDontDetectDT,
+       profilePortsDelayDialingTimeout,
+       profilePortsDialing,
+       profilePortsTransmitNumber,
+       profilePortsDontTransmitPrefix,
+       profilePortsRowStatus,
+       profilePortsDialToneDetectionParameters,
+	   profilePortsRingBackToneDetectionParameters,
+	   profilePortsBusyToneDetectionParameters,
+	   profilePortsDtDetectTime,
+	   profilePortsDecadePulseTime,
+	   profilePortsDecadePauseTime,
+	   profilePortsFxoCallBusy,
+	   profilePortsCpcRus,
+	   profilePortsReversalPolarityAction,
+	   profilePortsPstnActivity,
+	   profilePortsPstnRbDetectTimeout,
+	   profilePortsDetectFxoLinePresence,
+	   profilePortsBlockFxoLineInOutgoingDirection,
+	   profilePortsStopDial,
+	   profilePortsFxoMinLevelDetect,
+	   profilePortsModifier,
+       
+       profilesDialPlansMIBBoundary,
+       
+       profileDialPlanHost,
+       profileDialPlanDigits,
+       profileDialPlanTimeout,
+       profileDialPlanMinDigits,
+       profileDialPlanType,
+       profileDialPlanAccessMask,
+       profileDialPlanDialtone,
+       profileDialPlanModifier,
+       profileDialPlanNature,
+       profileDialPlanDelnum,
+       profileDialPlanPtime,
+       profileDialRowStatus,
+       
+       profilesRegExpDPTableMIBBoundary,
+       
+       profileRegExpDialOn,
+       profileRegExpDialProtocol,
+       profileRegExpDialText,
+       profileRegExpDialRowStatus,
+       
+       		useG711A,
+			useG711U,
+			useG726to32,
+			useG723,
+			useG729B,
+			useG729A,
+			g711Ptime,
+			g729Ptime,
+			g723Ptime,
+			g726to32Ptime,
+			g726to32PT,
+			dtmfTransfer ,
+			flashTransfer,
+			faxDetectDirection,
+			faxTransferCodec,
+			slaveFaxTransferCodec,
+			modemTransfer,
+			rfc2833PT,	
+			silenceSuppression,	
+			echoCanceller, 	
+			nlpDisable, 	
+			comfortNoise,
+			rtcpTimer,	 
+			rtcpControlPeriod,	 
+			ciscoNsePT,	
+			t38MaxDatagramSize, 	
+			t38Bitrate,
+			modemFaxDelay,
+			voiceMode,
+			voiceDelayMin,
+			voiceDelayMax,
+			voiceDeletionThreshold,
+			voiceDeletionMode,
+			profilesCodecsRowStatus,
+			rtcpXR,
+			rfc3264PtCommon,
+			
+			tauTrapSink,
+			tauTrapType,
+			tauSysName,
+			tauSysContact,
+			tauSysLocation,
+			tauRoCommunity,
+			tauRwCommunity,
+			tauTrapCommunity,
+			tauUserV3Name,
+			tauUserV3Password,
+			tauViewV3Type,
+			tauRestartSnmp,
+
+			tauMegacoTrapType,
+			tauMegacoTrapHost,
+			tauMegacoTrapCommunity,
+			tauMegacoTrapPort,
+			tauMegacoTrapRowStatus,
+            
+			fxoSerialGroupsPhone,
+			fxoSerialGroupsEnabled,
+			fxoSerialGroupsBusyType,
+			fxoSerialGroupsSipPort,
+			fxoSerialGroupsAuthName,
+			fxoSerialGroupsAuthPass,
+			fxoSerialGroupsPorts,
+			fxoSerialGroupsSipProfile,
+			fxoSerialGroupsTransmitNumber,
+			fxoSerialGroupsDontTransmitPrefix,
+			fxoSerialGroupsRowStatus,
+			fxoSerialGroupsSend503OnBusy,
+			fxoSerialGroupsType,
+
+			fxsEnableAutoupdate,
+			fxsSource,
+			fxsTFTPServer,
+			fxsConfigurationFile,
+			fxsFirmwareVersion,
+			fxsConfigurationUpdateInterval,
+			fxsFirmwareUpdateInterval,
+			autoupdateProtocol,
+			autoupdateAuth,
+			autoupdateUser,
+			autoupdatePassword,
+			
+			fansForceEnable,
+			fansThresholdTemperature,
+			
+			runSyslog,
+			syslogAddr,
+			syslogPort,
+			appAlarm,
+			appErr,
+			appWarn,
+			appInfo,
+			appDbg,
+			sipLevel,
+			h323Level,
+			vapiEnabled,
+			vapiLibLevel,
+			vapiAppLevel,
+			
+			portTestTestStatus,
+			portTestTestStartTime,
+			portTestLastTestStartTime,
+			portTestLastTestEndTime,
+			portTestResultFlag,
+			portTestRingU,
+			portTestTipU,
+			portTestShortVbat,
+			portTestResistTr,
+			portTestResistTg,
+			portTestResistRg,
+			portTestCapacityTr,
+			portTestCapacityTg,
+			portTestCapacityRg,	
+			portTestRunTest,
+			
+			monitorSerialGroupsMIBBoundary,
+			
+			serialGroupPhone,
+			serialGroupRegistrationState,
+			serialGroupRegistrationHost,
+			serialGroupLastRegistrationAt,
+			serialGroupNextRegistrationAfter,
+			serialGroupH323GK,
+				
+			fxoGroupPhone,
+			fxoGroupRegistrationState,
+			fxoGroupRegistrationHost,
+			fxoGroupLastRegistrationAt,
+			fxoGroupNextRegistrationAfter,
+			fxoGroupH323GK,
+			
+			firewallTableMIBBoundary,
+
+			startingSourceIpAddress,
+			numberOfSourceIpAddresses,
+			allSourceIpAddresses,
+			ruleprotocol,
+			typeOfMessageICMP,
+			startingSourcePort,
+			numberOfSourcePorts,
+			allSourcePorts,
+			startingDestinationPort,
+			numberOfDestinationPorts ,
+			allDestinationPorts,
+			ruleTarget,
+			ruleMoveTo,
+			ruleRowStatus,
+			firewallApply,
+			firewallConfirm,
+			
+			megacoPortTerminationID,
+			megacoPortState,
+			megacoPortComments,
+			megacoPortStateStartTime,
+			megacoPortStateDuration,
+			megacoPortJitter,
+			megacoPortTelNo,
+			
+			deviceName,
+			startTimer,
+			durationTimer,
+			waitAnswerTimer,
+			powerMode,
+			siptUsePrefix,
+			siptPrefix,
+			
+			rtpSipMin,
+			rtpSipMax,
+			interceptPortMin,
+			interceptPortMax,
+			diffservForSip,
+			diffservForRtp,
+			verifyRemoteMediaAddress,
+			
+			clType,
+			clHostOfNeighbourGateway,
+			clSimultaneousCallsCount,
+			clRowStatus,
+			
+			drRule,
+			drRing,
+			drPause,
+			drSubscriberProfiles,
+			drRowStatus,
+			
+			profilesSipAlertInfoMIBBoundary,
+
+			cadenceName,
+			cadenceRingRule,
+			cadenceRowStatus,
+			
+			stunEnable,
+			stunServer,
+			stunInterval,
+			sipPublicIp,
+			
+			modifierDialedNumberRegexpRule,	
+			modifierDialedNumberModification,	
+			modifierCallingNumberModification,
+			modifierRowStatus
+	}
+	STATUS  current
+	DESCRIPTION
+		"none"
+	::= { fxs72 200 }
+
+END
+
+
+
+
+
diff --git a/snmp_builder/mibs/ELTEX-SMI-ACTUAL-MIB.mib b/snmp_builder/mibs/ELTEX-SMI-ACTUAL-MIB.mib
new file mode 100644
index 0000000..624a376
--- /dev/null
+++ b/snmp_builder/mibs/ELTEX-SMI-ACTUAL-MIB.mib
@@ -0,0 +1,3472 @@
+--
+-- Eltex Enterprise Specific MIB: Structure of Management Information
+--
+-- Copyright (c) 2007-2011, Eltex Co
+--
+-- The contents of this document are subject to change without notice.
+--
+
+ELTEX-SMI-ACTUAL DEFINITIONS ::= BEGIN
+
+IMPORTS
+        enterprises,
+        MODULE-IDENTITY,
+        OBJECT-IDENTITY,
+        OBJECT-TYPE,
+        NOTIFICATION-TYPE,
+        Integer32,
+	IpAddress,
+	Counter64
+                FROM SNMPv2-SMI
+        DisplayString,
+        TimeStamp
+                FROM SNMPv2-TC
+        OBJECT-GROUP,
+        NOTIFICATION-GROUP
+                FROM SNMPv2-CONF;
+
+eltexLtd MODULE-IDENTITY
+        LAST-UPDATED "201205290000Z"
+        ORGANIZATION "Eltex Enterprise, Ltd."
+        CONTACT-INFO
+                "www.eltex.nsk.ru"
+        DESCRIPTION
+                "The Structure of Management Information for Eltex Networks."
+        REVISION     "201205290000Z"
+		DESCRIPTION  "Severity level: 4. http://snmp.cs.utwente.nl/ietf/mibs/validate/"
+        ::= { enterprises 35265 }
+        
+--
+-- Eltex MIB tree structure
+--
+
+elHardware OBJECT-IDENTITY
+        STATUS  current
+        DESCRIPTION
+                "The root of eltex hardware OIDs."
+        ::= { eltexLtd 1 }
+
+elSoftware OBJECT-IDENTITY
+        STATUS  current
+        DESCRIPTION
+                "The root of eltex software OIDs."
+        ::= { eltexLtd 2 }
+
+
+
+
+eltrapGroup OBJECT-IDENTITY
+        STATUS  current
+        DESCRIPTION
+                "The root of eltex traps objects."
+        ::= { eltexLtd 3 }
+
+--      
+-- eltexOMS "The MIB for eltex devices, that support OMS" { eltexLtd 4 } defined in ELTEX-OMS
+--
+-- eltexFile "The MIB for file operations" { eltexLtd 5 } defined in ELTEX-FILE-MANAGER-MIB
+--
+
+                
+
+-- Trap types for MC240 and other devices --
+        
+                mc240TrapTypes OBJECT IDENTIFIER        ::= { eltrapGroup 5 }
+
+                mcTrapExState OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "state (additional state)"
+                        ::= { mc240TrapTypes 1 }
+
+                mcTrapLParam1 OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "param-1 (slot or index)"
+                        ::= { mc240TrapTypes 2 }
+
+                mcTrapLParam2 OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "param-2 (port or index)"
+                        ::= { mc240TrapTypes 3 }
+
+                mcTrapLParam3 OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "param-3 (other index)"
+                        ::= { mc240TrapTypes 4 }
+
+
+                mcTrapID OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "ID (pbx trap id)"
+                        ::= { mc240TrapTypes 5 }
+
+
+                mcTrapDescr OBJECT-TYPE
+                        SYNTAX  DisplayString (SIZE (0..255))
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "Alarm description"
+                        ::= { mc240TrapTypes 6 }
+
+
+                mcTrapRestoredAlarmID OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "If this restore event then here writed Alarm ID. If this alarm event then mcTrapRestoredAlarmID=0."
+                        ::= { mc240TrapTypes 7 }
+
+
+                mcTrapSyncType OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "Type of trap: 0 - Normal; 1 - Journal alarms; 2 - Active alarms"
+                        ::= { mc240TrapTypes 8 }
+                        
+                mcReservedFlag OBJECT-TYPE
+                        SYNTAX  Integer32
+                        MAX-ACCESS read-only
+                        STATUS  current
+                        DESCRIPTION
+                                "Reserved flag"
+                        ::= { mc240TrapTypes 9 }
+        
+ponTeknovusAlarmTraps OBJECT IDENTIFIER         ::= { eltrapGroup 10 }
+
+-- ---- ---- ---- ---- ---- ---- ----  GePON ALARMS ---- ---- ---- ---- ---- ---- ---- ----
+                -- GePON ONU Authorization Alarm  --
+                ponTeknovusONTAuthAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Bad registration ONT Event (mcTrapLParam1=Optical Interface Number, mcTrapDescr='description with MAC addr ONT')"
+                        ::= { ponTeknovusAlarmTraps 1 }
+
+
+                -- GePON Eth link Down  --
+                ponTeknovusUplinkAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Uplink Down, mcTrapLParam1=Link Number, Description='GePON: Eth Link N down'"
+                        ::= { ponTeknovusAlarmTraps 2 }
+
+
+                -- GePON Optical link Event  --
+                ponTeknovusOpticalAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "The optical link N (mcTrapLParam1) has no active devices"
+                        ::= { ponTeknovusAlarmTraps 3 }
+
+                ponTeknovusFanAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "fan stopped. param1 = fan number"
+                        ::= { ponTeknovusAlarmTraps 4 }
+                        
+                ponTeknovusONTConfAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT is not configured. Param1 = optical interface number, Descr = mac-address of ONT."
+                        ::= { ponTeknovusAlarmTraps 5 }
+                        
+                ponTeknovusFlappingAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Period between OpticalAlarmTrap events is less than 30 seconds. Param 1 - link number"
+                        ::= { ponTeknovusAlarmTraps 6 }
+                        
+                ponTeknovusEponAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "EPON port failed. Param 1 - link number"
+                        ::= { ponTeknovusAlarmTraps 7 }
+                        
+                ponTeknovusConfigSavedAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Configuration save error."
+                        ::= { ponTeknovusAlarmTraps 8 }
+                        
+                ponTeknovusFirmwareUpdateAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Firmware update error."
+                        ::= { ponTeknovusAlarmTraps 9 }
+                        
+                ponTeknovusUserLoginAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "User login error
+                                 **This entry is deprecated**"
+                        ::= { ponTeknovusAlarmTraps 10 }
+                        
+                ponTeknovusRAMAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Ammount of free memory is < 5Mb"
+                        ::= { ponTeknovusAlarmTraps 11 }
+                        
+                ponTeknovusLoginAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Login unsuccessful.
+                                 Param1 = protocol (0 - serial, 1 - SSH, 2 - telnet, 3 - http, 4 - https)
+                                 Descr = login, ip:port"
+                        ::= { ponTeknovusAlarmTraps 12 }
+                        
+                ponTeknovusDuplicateMacAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Duplicate mac detected. Param1 = VID, Descr = mac."
+                        ::= { ponTeknovusAlarmTraps 14 }
+                        
+                ponTeknovusLoadAverageAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Load average exceeded limits. Param1 = 0 - 1 min, 1 - 5 min, 2 - 15 min"
+                        ::= { ponTeknovusAlarmTraps 15 }
+                        
+                ponTeknovusTemperatureAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is higher than 65 deg. Param1 = temperature value"
+                        ::= { ponTeknovusAlarmTraps 16 }
+                        
+                ponTeknovusONTPortBlockedAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT's UNI port blocked. Param1 = port number, Descr = mac-address of ONT"
+                        ::= { ponTeknovusAlarmTraps 17 }
+                        
+                ponTeknovusConfigMigrateAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Config migrate error. Param1 = config type (0 - all, 1 - pon)"
+                        ::= { ponTeknovusAlarmTraps 18 }
+                                
+                ponTeknovusOkTraps OBJECT IDENTIFIER    ::= { eltrapGroup 11 }
+
+                ponTeknovusONTAuthOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Normal registration ONT Event (mcTrapLParam1=Optical Interface Number, mcTrapDescr='description with MAC addr ONT')"
+                        ::= { ponTeknovusOkTraps 1 }
+
+
+                ponTeknovusUplinkOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Eth Link Up, mcTrapLParam1=Link Number, Description='GePON: Eth Link N up'"
+                        ::= { ponTeknovusOkTraps 2 }
+
+
+                ponTeknovusOpticalOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "The optical link N (mcTrapLParam1) has M (mcTrapLParam2) active devices"
+                        ::= { ponTeknovusOkTraps 3 }
+
+                ponTeknovusFanOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "param1 = fan number"
+                        ::= { ponTeknovusOkTraps 4 }
+                        
+                ponTeknovusONTConfOKTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT is configured. Param1 = optical interface number, Descr = macaddress of ont"
+                        ::= { ponTeknovusOkTraps 5 }
+                        
+                ponTeknovusFlappingOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "1 minute passed after last OpticalAlarmTrap. Param 1 - link number"
+                        ::= { ponTeknovusOkTraps 6 }
+                        
+                ponTeknovusEponOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "EPON port ok. Param 1 - link number"
+                        ::= { ponTeknovusOkTraps 7 }
+                        
+                ponTeknovusConfigSavedOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Configuration saved. Descr = Configuration saved to flash"
+                        ::= { ponTeknovusOkTraps 8 }
+                        
+                ponTeknovusFirmwareUpdateOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Firmware updated. Descr = Firmware updated"
+                        ::= { ponTeknovusOkTraps 9 }
+                        
+                ponTeknovusUserLoginOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "User logged in from CLI. Param1 = privileged/nonprivileged (1/0), Descr = ${username} logged in
+                                 ** This entry is deprecated."
+                        ::= { ponTeknovusOkTraps 10 }
+                        
+                ponTeknovusRAMOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Ammount of free memory is > 7Mb"
+                        ::= { ponTeknovusOkTraps 11 }
+                        
+                ponTeknovusLoginOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Login successful. Param1 = privileged/nonprivileged(1/0)
+                                 Param1 = protocol (0 - serial, 1 - SSH, 2 - telnet, 3 - http, 4 - https)
+                                 Descr = login, ip:port"
+                        ::= { ponTeknovusOkTraps 12 }
+                        
+                ponTeknovusLogoutOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "User logged out. Param1 = privileged/nonprivileged(1/0)
+                                 Param1 = protocol (0 - serial, 1 - SSH, 2 - telnet, 3 - http, 4 - https)
+                                 Descr = login, ip:port"
+                        ::= { ponTeknovusOkTraps 13 }
+                        
+                ponTeknovusSwitchConfigChangeTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Switch configuration has been changed"
+                        ::= { ponTeknovusOkTraps 14 }
+                        
+                ponTeknovusLoadAverageOkTrap  NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "Load average is back to normal. Param1 = 0 - 1 min, 1 - 5 min, 2 - 15 min"
+                        ::= { ponTeknovusOkTraps 15 }
+                        
+                ponTeknovusTemperatureOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is lower than 60 deg. Param1 = temperature value"
+                        ::= { ponTeknovusOkTraps 16 }
+                        
+                ponTeknovusONTPortBlockedOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT's UNI port not blocked. Param1 = port number, Descr = mac-address of ONT"
+                        ::= { ponTeknovusOkTraps 17 }
+                        
+                ponTeknovusConfigMigrateOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Config migrate success. Param1 = config type (0 - all, 1 - pon)"
+                        ::= { ponTeknovusOkTraps 18 }
+                        
+                ponTeknovusBoardRebootTrap  NOTIFICATION-TYPE
+						OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Board is being rebooted. Descr = <username/Snmp> <ip-address> initiated reboot"
+                        ::= { ponTeknovusOkTraps 20 }
+                        
+               ponTeknovusONTDeconfigureTrap  NOTIFICATION-TYPE
+						OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT is being deconfigured (before disconnect). Param1 = pon-channel, Description = mac-address"
+                        ::= { ponTeknovusOkTraps 21 }
+                        
+               ponTeknovusONTStateChangedTrap  NOTIFICATION-TYPE
+						OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT's state changed. Param1 = pon channel, Param2 = ID ONT, Descr = ELTXhhhhhhhh pon_channel id state"
+                        ::= { ponTeknovusOkTraps 22 }
+                        
+               ponTeknovusONTConfigChangedTrap  NOTIFICATION-TYPE
+						OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT config changed.  Param1 = pon channel, Param2 = ID ONT, Descr = ADD|DEL|EDIT ELTXhhhhhhhh pon_channel id description"
+                        ::= { ponTeknovusOkTraps 23 }
+                        
+               ponTeknovusConfigRereadTrap  NOTIFICATION-TYPE
+						OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Config was reread from flash."
+                        ::= { ponTeknovusOkTraps 24 }
+                        
+                        
+------ fxs72 Alarm Traps begins here
+
+        
+fxs72AlarmTraps OBJECT IDENTIFIER       ::= { eltrapGroup 6 }
+
+                fxs72VbatAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Vbat is out of limits (Vbat<38V or Vbat>72V). LParam1 = Vbat voltage"
+                        ::= { fxs72AlarmTraps 1 }
+                        
+                fxs72VringAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Vring1 or Vring2 is out of limits (Vring<100V or Vring>120V). LParam1 = Vring voltage. LParam2 = 1 or 2"
+                        ::= { fxs72AlarmTraps 2 }
+                        
+                fxs72TemperatureAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is too high. (Temp>90 deg). LParam1 = temperature value. LParam2 = sensor number"
+                        ::= { fxs72AlarmTraps 3 }
+                        
+                fxs72FanAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Fans are on, but not rotating. LParam1 = fan number"
+                        ::= { fxs72AlarmTraps 4 }
+                        
+                fxs72SSwAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Softswitch became disconnected
+                                TAU-MEGACO p1=status (undefined=0, connect=1, disconnect=2)"
+                        ::= { fxs72AlarmTraps 5 }
+                        
+                fxs72PortAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "Port Blocked. Param1 = port number, p2=block cause, Descr = Block cause
+                                TAU-MEGACO p1=port, p2=cause (1-leakage_current, 2-overheating, 3-dissipated_power)"
+                        ::= { fxs72AlarmTraps 6 }
+                        
+                 fxs72BpuAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "BPU is NOT available"
+                        ::= { fxs72AlarmTraps 12 }
+                        
+                  fxs72TempmeasurementAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature measurement failed. TAU-SIP 2.9"
+                        ::= { fxs72AlarmTraps 13 }
+                        
+                  fxs72LicenseAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "TAU-MEGACO 1.2
+									mcTrapExState: 1 - alarm, no license, 0 - ok license"
+                        ::= { fxs72AlarmTraps 14 }
+
+--	COM_COPY_ERR_NONE = 0,
+--	COM_COPY_ERR_UNKNOWN = 1,
+--	COM_COPY_ERR_INVALID_SRC = 2,  invalid source file argument
+--	COM_COPY_ERR_INVALID_DST = 3,  invalid destination file argument
+--	COM_COPY_ERR_UNSUPPORTED_SRC_URL = 4,  unsupported source URL type
+--	COM_COPY_ERR_UNSUPPORTED_DST_URL = 5,  unsupported destination URL type
+--	COM_COPY_ERR_CANNOT_STAT = 6,  cannot stat
+--	COM_COPY_ERR_PATH_INVALID_FOR_UNIT = 7,  path is not valid for unit
+--	COM_COPY_ERR_COPY_FROM_SLOT = 8,  copying from slot not supported
+--	COM_COPY_ERR_TFTP_GET = 9,  tftp get copying file failed
+--	COM_COPY_ERR_TFTP_PUT = 10,  tftp put copying file failed
+--	COM_COPY_ERR_DEST_IS_DIR = 11,  destination is a directory
+--	COM_COPY_ERR_TOOLONG_FILENAME = 12, filename too long
+--	COM_COPY_ERR_INSTALL_FAIL = 13,  switchd return on install is not ok
+
+                 fxs72updateFwFail NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "par1 = error type. descr = file + addr + FAIL"
+                        ::= { fxs72AlarmTraps 20 }
+        
+------ fxs72 Alarm Traps ends here
+
+------ fxs72 Ok Traps begins here
+
+fxs72OkTraps OBJECT IDENTIFIER  ::= { eltrapGroup 7 }
+
+                fxs72VbatOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Vbat is back to normal."
+                        ::= { fxs72OkTraps 1 }
+                        
+                fxs72VringOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Vring1 or Vring2 is back to normal. LParam2 = 1 or 2"
+                        ::= { fxs72OkTraps 2 }
+                        
+                fxs72TemperatureOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is back to normal. LParam2 = sensor number"
+                        ::= { fxs72OkTraps 3 }
+                        
+                fxs72FanOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Fans are rotating. LParam1 = fan number"
+                        ::= { fxs72OkTraps 4 }
+                        
+                fxs72SSwOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Softswitch status ok.
+                                TAU-MEGACO p1=status (undefined=0, connect=1, disconnect=2)"
+                        ::= { fxs72OkTraps 5 }
+                        
+                fxs72PortOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "Port unblocked. Param1 = port number, p2=state
+                                TAU-MEGACO p1=port, p2=state(ELTEX-FXS72::PortMegacoState)"
+                        ::= { fxs72OkTraps 6 }
+                        
+                fxs72VmodeSwitchTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Voltage mode has been switched. LParam1 = new mode (1- 60V, 2 - 48V)."
+                        ::= { fxs72OkTraps 10 }
+                        
+                fxs72FansSwitchTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Fans has been switched on or off. LParam1 = 0 - off, 1 - on."
+                        ::= { fxs72OkTraps 11 }
+                        
+                 fxs72BpuOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "BPU is available"
+                        ::= { fxs72OkTraps 12 }
+
+                 fxs72TempmeasurementOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature measurement is OK. TAU-SIP 2.9"
+                        ::= { fxs72OkTraps 13 }
+                        
+                 fxs72LicenseOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "TAU-MEGACO 1.2
+									mcTrapExState: 1 - alarm, no license, 0 - ok license"
+                        ::= { fxs72OkTraps 14 }
+                        
+                 fxs72updateFwOk NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "descr = file + addr + OK"
+                        ::= { fxs72OkTraps 20 }
+        
+------ fxs72OkTraps ends here
+
+                        
+                        
+-- PP4G traps
+
+pp4AlarmTraps OBJECT IDENTIFIER         ::= { eltrapGroup 12 }
+
+                pp4LinkAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Link is down (Param1 = link number)"
+                        ::= { pp4AlarmTraps 1 }
+                        
+                pp4AutoNegotiationAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Autonegotiation failed (Param1 = link number)"
+                        ::= { pp4AlarmTraps 2 }
+                        
+                pp4MemoryAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Running out of free memory (Param1 = current ammount of free memory)"
+                        ::= { pp4AlarmTraps 3 }
+                        
+                pp4LoadAvgAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Load avg > 95% (Param1 = 1-1min, 2-5 min, 3-15 min, all LAs in description"
+                        ::= { pp4AlarmTraps 4 }
+                        
+                pp4LoginAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Login failed"
+						::= { pp4AlarmTraps 5 }
+						
+                pp4LogoutAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Logout failed"
+						::= { pp4AlarmTraps 6 }	
+						
+				-- there is pp4OkTraps 7 - Commit Ok
+
+				pp4SaveAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Save FAIL"
+						::= { pp4AlarmTraps 8 }
+						
+                pp4LoadCpuAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Load CPU Alarm"
+						::= { pp4AlarmTraps 9 }
+						
+                pp4DuplicationMacAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Duplication of MAC address on PP4"
+						::= { pp4AlarmTraps 10 }
+				
+                pp4LinkFlapAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"linkflap on ifindex=param1"
+						::= { pp4AlarmTraps 11 }	
+						
+				pp4BoardRemoveAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Board removed from slot #par1. board type #par2"
+						::= { pp4AlarmTraps 13 }						
+                       
+                pp4UnitRemoveAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"UNIT number par[1] vas removed from position left(par[2]=1) or right(par[2]=0)"
+						::= { pp4AlarmTraps 14 }
+                 
+                -- there is pp4OkTraps 15 - Role changed
+                       
+                pp4PortCounterErrorFoundAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Founded errors for this port-counter"
+						::= { pp4AlarmTraps 16 } 
+						
+				pp4SyncDisallowedAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"User didn't set command to allow unit-synchronization"
+						::= { pp4AlarmTraps 17 } 
+                    
+                -- there is pp4ConfigRestoredOkTrap ::= { pp4OkTraps 18 }
+						
+				pp4RebootUnitAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4AlarmTraps 19 } 
+						
+				pp4RebootStackAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4AlarmTraps 20 }
+						
+				pp4RebootFwTimerAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4AlarmTraps 21 }
+						
+				pp4FwUpdateAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4AlarmTraps 22 }
+						
+				pp4FwConfirmNeededAlarmTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4AlarmTraps 23 }
+                       
+			pp4OkTraps OBJECT IDENTIFIER    ::= { eltrapGroup 13 }
+				
+                pp4LinkOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Link is up (Param1 = link number)"
+                        ::= { pp4OkTraps 1 }
+                        
+                pp4AutoNegotiationOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Autonegotiation successful (Param1 = link number)"
+                        ::= { pp4OkTraps 2 }
+                        
+                pp4MemoryOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Ammount of free memory is back to normal"
+                        ::= { pp4OkTraps 3 }
+                        
+                pp4LoadAvgOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Load avg is back to normal (Param1 = 1-1min, 2-5 min, 3-15 min, all LAs in description"
+                        ::= { pp4OkTraps 4 }
+                        
+                pp4LoginOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Login OK"
+						::= { pp4OkTraps 5 }
+
+                pp4LogoutOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Logout OK"
+						::= { pp4OkTraps 6 }
+						
+                pp4CommitOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Commit OK"
+						::= { pp4OkTraps 7 }
+						
+                pp4SaveOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Save OK"
+						::= { pp4OkTraps 8 }
+				
+				pp4LinkFlapEndOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"linkflap End on ifindex=param1"
+						::= { pp4OkTraps 11 }	
+						
+				pp4ConfigChangedOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Config pp4x Changed"
+						::= { pp4OkTraps 12 }
+						
+				pp4BoardAddOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"New board added to slot #par1. board type #par2"
+						::= { pp4OkTraps 13 }
+				
+				pp4UnitAddOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"UNIT number par[1] vas added to position left(par[2]=1) or right(par[2]=0)"
+						::= { pp4OkTraps 14 }
+						
+				pp4RoleChangedOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"Now unit number par[1] with position par[2] is Master"
+						::= { pp4OkTraps 15 }
+				
+				pp4PortCounterErrorFreeOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"No errors for this port-counter"
+						::= { pp4OkTraps 16 }
+
+				pp4SyncDisallowedOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"User set command to allow unit-synchronization"
+						::= { pp4OkTraps 17 } 
+						
+				pp4ConfigRestoredOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							"timeout for confirm. Config Restored Now"
+						::= { pp4OkTraps 18 }
+						
+				pp4RebootUnitOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4OkTraps 19 }
+						
+				-- pp4RebootStackAlarmTrap is 20
+				-- pp4RebootFwTimerAlarmTrap is 21
+				
+				pp4FwUpdateOkTrap NOTIFICATION-TYPE
+						OBJECTS {
+								mcTrapExState,
+								mcTrapLParam1,
+								mcTrapLParam2,
+								mcTrapLParam3,
+								mcTrapID,
+								mcTrapDescr}
+						STATUS  current
+						DESCRIPTION
+							" "
+						::= { pp4OkTraps 22 }
+
+-- MXA32 traps
+
+mxa32AlarmTraps  OBJECT IDENTIFIER      ::= { eltrapGroup 14 }
+mxa32OkTraps     OBJECT IDENTIFIER      ::= { eltrapGroup 15 }
+
+                mxa32DslLinkAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Adsl port in down state.
+                                LParam1 - port number"
+                        ::= { mxa32AlarmTraps 1 }
+                        
+                mxa32EthLinkAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapSyncType,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Uplink port in down state.
+                                LParam1 - port number"
+                        ::= { mxa32AlarmTraps 2 }
+                        
+                mxa32TempAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is too high.
+                                LParam1 - sensor index: 0(sensor0), 1(sensor1)
+                                LParam3 - actual temperature value ['C]"
+                        ::= { mxa32AlarmTraps 3 }
+                        
+                mxa32VoltAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Device voltage is out of range.
+                                LParam1 - voltage index: 2(1V), 3(12V), 4(-12V), 5(3.3V), 6(2.5V), 7(1.8V), 8(0.9V), 9(1.5V)
+                                LParam3 - actual voltage value [mV/10]"
+                        ::= { mxa32AlarmTraps 4 }
+                        
+			mxa32UserLoginTrap NOTIFICATION-TYPE
+				OBJECTS {
+					mcTrapExState,
+					mcTrapLParam1,
+					mcTrapLParam2,
+					mcTrapLParam3,
+					mcTrapID,
+					mcTrapDescr,
+					mcTrapSyncType}
+				STATUS  current
+				DESCRIPTION
+                                "User logIN.
+                                LParam1 - the process pid
+                                LParam2 - interface number: 1(console), 2(telnet), 3..6(web)"
+				::= { mxa32AlarmTraps 5 }                        
+                        
+                mxa32DslLinkOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Adsl port is up.
+                                LParam1 - port number"
+                        ::= { mxa32OkTraps 1 }
+
+                mxa32EthLinkOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Uplink port is up.
+                                LParam1 - port number"
+                        ::= { mxa32OkTraps 2 }
+
+                mxa32TempOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature normalization.
+                                LParam1 - sensor index: 0(sensor0), 1(sensor1)
+                                LParam3 - actual temperature value ['C]"
+                        ::= { mxa32OkTraps 3 }
+
+                mxa32VoltOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr,
+                                mcTrapSyncType}
+                        STATUS  current
+                        DESCRIPTION
+                                "Device voltage is in acceptable range.
+                                LParam1 - voltage index: 2(1V), 3(12V), 4(-12V), 5(3.3V), 6(2.5V), 7(1.8V), 8(0.9V), 9(1.5V)
+                                LParam3 - actual voltage value [mV/10]"
+                        ::= { mxa32OkTraps 4 }
+
+		mxa32UserLogoutTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "User logOUT.
+                                LParam1 - the process pid
+                                LParam2 - interface number: 1(console), 2(telnet), 3..6(web)"
+			::= { mxa32OkTraps 5 }
+
+-- MXA64 traps
+
+mxa64AlarmTraps  OBJECT IDENTIFIER 	::= { eltrapGroup 16 }
+mxa64OkTraps     OBJECT IDENTIFIER 	::= { eltrapGroup 17 }
+
+		mxa64DslLinkAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Adsl port in down state.
+                                LParam1 - port number"
+			::= { mxa64AlarmTraps 1 }
+			
+		mxa64EthLinkAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Uplink port in down state.
+                                LParam1 - port number"
+			::= { mxa64AlarmTraps 2 }
+			
+		mxa64TempAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Temperature is too high.
+                                LParam1 - sensor index: 0(sensor0), 1(sensor1), 2(sensor2), 3(sensor3)
+                                LParam3 - actual temperature value ['C]"
+			::= { mxa64AlarmTraps 3 }
+			
+		mxa64VoltAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Device voltage is out of range.
+                                LParam1 - voltage index: 4(1V), 5(12V), 6(-12V), 7(3.3V), 8(2.5V), 9(1.8V), 10(0.9V), 11(1.5V)
+                                LParam3 - actual voltage value [mV/10]"
+			::= { mxa64AlarmTraps 4 }
+
+		mxa64UserLoginTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "User login.
+                                LParam1 - the process pid
+                                LParam2 - interface number: 1(console), 2(telnet), 3..6(web)"
+			::= { mxa64AlarmTraps 5 }
+			
+		mxa64DslLinkOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Adsl port is up.
+                                LParam1 - port number"
+			::= { mxa64OkTraps 1 }
+
+		mxa64EthLinkOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Uplink port is up.
+                                LParam1 - port number"
+			::= { mxa64OkTraps 2 }
+
+		mxa64TempOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Temperature normalization.
+                                LParam1 - sensor index: 0(sensor0), 1(sensor1), 2(sensor2), 3(sensor3)
+                                LParam3 - actual temperature value ['C]"
+			::= { mxa64OkTraps 3 }
+
+		mxa64VoltOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Device voltage is in acceptable range.
+                                LParam1 - voltage index: 4(1V), 5(12V), 6(-12V), 7(3.3V), 8(2.5V), 9(1.8V), 10(0.9V), 11(1.5V)
+                                LParam3 - actual voltage value [mV/10]"
+			::= { mxa64OkTraps 4 }
+
+		mxa64UserLogoutTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "User logout.
+                                LParam1 - the process pid
+                                LParam2 - interface number: 1(console), 2(telnet), 3..6(web)"
+			::= { mxa64OkTraps 5 }
+
+-- MXA24 traps
+
+mxa24AlarmTraps  OBJECT IDENTIFIER 	::= { eltrapGroup 18 }
+mxa24OkTraps     OBJECT IDENTIFIER 	::= { eltrapGroup 19 }
+
+		mxa24DslLinkAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Adsl port in down state.
+                                LParam1 - port number"
+			::= { mxa24AlarmTraps 1 }
+			
+		mxa24EthLinkAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Uplink port in down state.
+                                LParam1 - port number"
+			::= { mxa24AlarmTraps 2 }
+			
+		mxa24TempAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Temperature is too high.
+                                LParam1 - sensor index: 0(sensor0), 1(sensor1)
+                                LParam3 - actual temperature value ['C]"
+			::= { mxa24AlarmTraps 3 }
+			
+		mxa24VoltAlarmTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Device voltage is out of range.
+                                LParam1 - voltage index: 2(1V), 3(12V), 4(-12V), 5(3.3V), 6(2.5V), 7(1.8V), 8(0.9V), 9(1.5V)
+                                LParam3 - actual voltage value [mV/10]"
+			::= { mxa24AlarmTraps 4 }
+
+		mxa24UserLoginTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Device voltage is out of range.
+                                LParam1 - the process pid
+                                LParam2 - interface number: 1(console), 2(telnet), 3..6(web)"
+			::= { mxa24AlarmTraps 5 }
+			
+		mxa24DslLinkOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Adsl port is up.
+                                LParam1 - port number"
+			::= { mxa24OkTraps 1 }
+
+		mxa24EthLinkOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Uplink port is up.
+                                LParam1 - port number"
+			::= { mxa24OkTraps 2 }
+
+		mxa24TempOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Temperature normalization.
+                                LParam1 - sensor index: 0(sensor0), 1(sensor1)
+                                LParam3 - actual temperature value ['C]"
+			::= { mxa24OkTraps 3 }
+
+		mxa24VoltOkTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "Device voltage is in acceptable range.
+                                LParam1 - voltage index: 2(1V), 3(12V), 4(-12V), 5(3.3V), 6(2.5V), 7(1.8V), 8(0.9V), 9(1.5V)
+                                LParam3 - actual voltage value [mV/10]"
+			::= { mxa24OkTraps 4 }
+
+		mxa24UserLogoutTrap NOTIFICATION-TYPE
+			OBJECTS {
+				mcTrapExState,
+				mcTrapLParam1,
+				mcTrapLParam2,
+				mcTrapLParam3,
+				mcTrapID,
+				mcTrapDescr,
+				mcTrapSyncType}
+			STATUS  current
+			DESCRIPTION
+                                "User logout.
+                                LParam1 - the process pid
+                                LParam2 - interface number: 1(console), 2(telnet), 3..6(web)"
+			::= { mxa24OkTraps 5 }
+			                        
+-- OMS operation status traps --
+
+omsOperationAlarmTraps OBJECT IDENTIFIER        ::= { eltrapGroup 20 }
+omsOperationOkTraps OBJECT IDENTIFIER   ::= { eltrapGroup 21 }
+
+
+omsOperationCommandAlarm NOTIFICATION-TYPE
+        OBJECTS {
+                mcTrapExState,
+                mcTrapLParam1,
+                mcTrapLParam2,
+                mcTrapLParam3,
+                mcTrapID,
+                mcTrapDescr}
+        STATUS  current
+        DESCRIPTION
+                "   mcTrapLParam1 = command <upload=1, download=2, apply=3, confirm=4, save=5, reboot=6, test=7>;
+                    mcTrapLParam2 = filetype <pattern=1, private=2, binary=3>
+                    mcTrapDescr = Description of operarion:
+                        DeviceName, 
+                        command <apply, download, save, upload, reboot, confirm, test>, 
+                        tftp host,
+                        config filename,
+                        status=Error,
+                        cause of error"
+        ::= { omsOperationAlarmTraps 1 }
+
+omsOperationCommandOk NOTIFICATION-TYPE
+        OBJECTS {
+                mcTrapExState,
+                mcTrapLParam1,
+                mcTrapLParam2,
+                mcTrapLParam3,
+                mcTrapID,
+                mcTrapDescr}
+        STATUS  current
+        DESCRIPTION
+                "   mcTrapLParam1 = command <upload=1, download=2, apply=3, confirm=4, save=5, reboot=6, test=7>;
+                    mcTrapLParam2 = filetype <pattern=1, private=2, binary=3>
+                    mcTrapDescr = Description of operarion:
+                        DeviceName, 
+                        command <apply, download, save, upload, reboot, confirm, test>, 
+                        tftp host,
+                        config filename,
+                        status=Ok"
+        ::= { omsOperationOkTraps 1 }
+        
+-- end of OMS traps
+
+
+
+elcAlarmTraps OBJECT IDENTIFIER         ::= { eltrapGroup 22 }
+
+-- ---- ---- ---- ---- ---- ---- ----  GePON ALARMS ---- ---- ---- ---- ---- ---- ---- ----
+                -- GePON ONU Authorization Alarm  --
+                elcONTAuthAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Bad registration ONT Event (mcTrapLParam1=Optical Interface Number, mcTrapDescr='description with MAC addr ONT')"
+                        ::= { elcAlarmTraps 1 }
+
+
+                -- GePON Eth link Down  --
+                elcUplinkAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Uplink Down, mcTrapLParam1=Link Number, Description='GePON: Eth Link N down'"
+                        ::= { elcAlarmTraps 2 }
+
+
+                -- GePON Optical link Event  --
+                elcOpticalAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "The optical link N (mcTrapLParam1) has no active devices"
+                        ::= { elcAlarmTraps 3 }
+
+                elcFanAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "fan stopped. param1 = fan number"
+                        ::= { elcAlarmTraps 4 }
+                        
+                elcONTConfAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT is not configured. Param1 = optical interface number, Descr = mac-address of ONT."
+                        ::= { elcAlarmTraps 5 }
+                        
+                elcFlappingAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Period between OpticalAlarmTrap events is less than 30 seconds. Param 1 - link number"
+                        ::= { elcAlarmTraps 6 }
+                        
+                elcEponAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "EPON port failed. Param 1 - link number"
+                        ::= { elcAlarmTraps 7 }
+                        
+                elcConfigSavedAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Configuration save error."
+                        ::= { elcAlarmTraps 8 }
+                        
+                elcFirmwareUpdateAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Firmware update error."
+                        ::= { elcAlarmTraps 9 }
+                        
+                elcUserLoginAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "User login error
+                                 **This entry is deprecated**"
+                        ::= { elcAlarmTraps 10 }
+                        
+                elcRAMAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Ammount of free memory is < 5Mb"
+                        ::= { elcAlarmTraps 11 }
+                        
+                elcLoginAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Login unsuccessful.
+                                 Param1 = protocol (0 - serial, 1 - SSH, 2 - telnet, 3 - http, 4 - https)
+                                 Descr = login, ip:port"
+                        ::= { elcAlarmTraps 12 }
+                        
+                elcDuplicateMacAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Duplicate mac detected. Param1 = VID, Descr = mac."
+                        ::= { elcAlarmTraps 14 }
+                        
+                elcLoadAverageAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Load average exceeded limits. Param1 = 0 - 1 min, 1 - 5 min, 2 - 15 min"
+                        ::= { elcAlarmTraps 15 }
+                        
+                elcTemperatureAlarmTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is higher than 65 deg. Param1 = temperature value"
+                        ::= { elcAlarmTraps 16 }
+                                
+                elcOkTraps OBJECT IDENTIFIER    ::= { eltrapGroup 23 }
+
+                elcONTAuthOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Normal registration ONT Event (mcTrapLParam1=Optical Interface Number, mcTrapDescr='description with MAC addr ONT')"
+                        ::= { elcOkTraps 1 }
+
+
+                elcUplinkOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Eth Link Up, mcTrapLParam1=Link Number, Description='GePON: Eth Link N up'"
+                        ::= { elcOkTraps 2 }
+
+
+                elcOpticalOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "The optical link N (mcTrapLParam1) has M (mcTrapLParam2) active devices"
+                        ::= { elcOkTraps 3 }
+
+                elcFanOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "param1 = fan number"
+                        ::= { elcOkTraps 4 }
+                        
+                elcONTConfOKTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "ONT is configured. Param1 = optical interface number, Descr = macaddress of ont"
+                        ::= { elcOkTraps 5 }
+                        
+                elcFlappingOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "1 minute passed after last OpticalAlarmTrap. Param 1 - link number"
+                        ::= { elcOkTraps 6 }
+                        
+                elcEponOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "EPON port ok. Param 1 - link number"
+                        ::= { elcOkTraps 7 }
+                        
+                elcConfigSavedOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Configuration saved. Descr = Configuration saved to flash"
+                        ::= { elcOkTraps 8 }
+                        
+                elcFirmwareUpdateOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Firmware updated. Descr = Firmware updated"
+                        ::= { elcOkTraps 9 }
+                        
+                elcUserLoginOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  deprecated
+                        DESCRIPTION
+                                "User logged in from CLI. Param1 = privileged/nonprivileged (1/0), Descr = ${username} logged in
+                                 ** This entry is deprecated."
+                        ::= { elcOkTraps 10 }
+                        
+                elcRAMOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Ammount of free memory is > 7Mb"
+                        ::= { elcOkTraps 11 }
+                        
+                elcLoginOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Login successful. Param1 = privileged/nonprivileged(1/0)
+                                 Param1 = protocol (0 - serial, 1 - SSH, 2 - telnet, 3 - http, 4 - https)
+                                 Descr = login, ip:port"
+                        ::= { elcOkTraps 12 }
+                        
+                elcLogoutOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "User logged out. Param1 = privileged/nonprivileged(1/0)
+                                 Param1 = protocol (0 - serial, 1 - SSH, 2 - telnet, 3 - http, 4 - https)
+                                 Descr = login, ip:port"
+                        ::= { elcOkTraps 13 }
+                        
+                elcSwitchConfigChangeTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Switch configuration has been changed"
+                        ::= { elcOkTraps 14 }
+                        
+                elcLoadAverageOkTrap  NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "Load average is back to normal. Param1 = 0 - 1 min, 1 - 5 min, 2 - 15 min"
+                        ::= { elcOkTraps 15 }
+                        
+                elcTemperatureOkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Temperature is lower than 60 deg. Param1 = temperature value"
+                        ::= { elcOkTraps 16 }
+                        
+                        
+                        
+                        
+
+
+
+
+-- smg traps
+
+smgTraps OBJECT IDENTIFIER      ::= { eltrapGroup 29 }
+
+        smgAlarm OBJECT IDENTIFIER      ::= { smgTraps 1 }
+
+                smgAlarmConfigTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Configuration failure (exState 0-ok 3-critical)"
+                        ::= { smgAlarm 1 }
+
+                smgAlarmSiptNodeTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "SIPT-module alarm (exState 0-ok 3-critical)"
+                        ::= { smgAlarm 2 }
+
+                smgAlarmMspDevTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "SM-VP module alarm  (exState 0-ok 1-alarm)"
+                        ::= { smgAlarm 3 }
+                        
+                smgAlarmLinkSetTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "LinkSet alarm (exState 0-ok 3-critical)"
+                        ::= { smgAlarm 4 }
+
+                smgAlarmStreamTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Stream alarm (exState 0-ok 2-warning 3-critical)"
+                        ::= { smgAlarm 5 }
+
+                smgAlarmSS7LinkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "SS7-Link alarm (exState 0-ok 1-alarm)
+									par1 - linkset, par2 - e1line"
+                        ::= { smgAlarm 6 }
+
+                smgAlarmSyncTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Synchronization alarm (freerun mode - work with local source)
+                                   (exState 0-ok 1-alarm 2-warning)"
+                        ::= { smgAlarm 7 }
+                smgAlarmCdrFtpTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Param1 0 No alarm, 
+                                1 - warning (minor alarm. The record was wrong, local CDR-data is less than 5 Mb), 
+                                2 - common (major alarm. The record was wrong, local CDR-data is more than 5 Mb and less than 15 Mb), 
+                                3 - critical (critical alarm. The record was wrong, local CDR-data is more than 15 Mb)
+                                  (exState 0-ok 1-alarm 2-warning 3-critical)"
+                        ::= { smgAlarm 12 }
+                 smgAlarmMemoryLimitTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Param1 - free space, Param2 - summary space
+                                exState 0-ok, 2-warning (75% busy), 1-alarm (90%), 3-critical (95%)"
+                        ::= { smgAlarm 13 }
+                        
+                 smgAlarmPowerModuleStateTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "exState 0 - ok, 2 - warning
+                                Param1 - PSU number
+                                Param2 - PSU state: 0 - OK, 1 - no power supply, 2 - missing"
+                        ::= { smgAlarm 14 }
+                        
+                 smgAlarmH323NodeTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No link to H323 adapter alarm (exState 0-ok 1-alarm)"
+                        ::= { smgAlarm 16 }  
+      
+                 smgAlarmTemperatureTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Tenperature alarm
+                                exState: 
+									0 - ok,
+									2 - warning (more than 70 deg. Celsius),
+									1 - alarm (more than 85),
+									3 - critical-alarm (more than 100)
+                                param2 - temp #0 (CPU temp, generates alarm),
+                                param3 - temp #1 (RAM temp, for info only)"
+                        ::= { smgAlarm 17 }
+                        
+                 smgAlarmMaintenanceTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Maintenance alarm
+                                param1: 
+									MAINTENANCE_ALARM_SS7_COT_FAIL = 1,
+                                param2 - E1 stream number,
+                                param3 - E1 channel number"
+                        ::= { smgAlarm 18 } 
+                        
+                 smgAlarmSipAccessTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "SIP interface access alarm
+                                param1 - SIP interface number"
+                        ::= { smgAlarm 19 }      
+                        
+                 smgAlarmSbcRegistrationExpiredTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "sbc registration expired alarm. (no ok trap). abonent number in description"
+                        ::= { smgAlarm 50 }
+                 smgAlarmIpcOverloadTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "IPC overload (exState 0-ok 1-alarm)"
+                        ::= { smgAlarm 51 }
+                        
+                 smgUpdateFwFail NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "descr = file + addr + FAIL"
+                        ::= { smgAlarm 20 }
+                        
+                smgAlarmProcOverloadTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "exState 0-ok, 2-warning (load 90%), 1-alarm (95%)"
+                        ::= { smgAlarm 21 }
+        
+        smgOK OBJECT IDENTIFIER         ::= { smgTraps 2 }
+        
+                smgOkConfigTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO Configuration failure"
+                        ::= { smgOK 1 }
+
+                smgOkSiptNodeTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO SIPT-module alarm"
+                        ::= { smgOK 2 }
+
+                smgOkMspDevTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO SM-VP module alarm"
+                        ::= { smgOK 3 }
+                        
+                smgOkLinkSetTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO LinkSet alarm"
+                        ::= { smgOK 4 }
+
+                smgOkStreamTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO Stream alarm"
+                        ::= { smgOK 5 }
+
+                smgOkSS7LinkTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO SS7-Link alarm
+									par1 - linkset, par2 - e1line"
+                        ::= { smgOK 6 }
+
+                smgOkSyncTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "NO Synchronization alarm (freerun mode - work with local source)"
+                        ::= { smgOK 7 }
+                smgOkCdrFtpTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No Cdr Ftp Alarm"
+                        ::= { smgOK 12 }
+                 smgOkMemoryLimitTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No memory alarm"
+                        ::= { smgOK 13 }
+                 smgOkPowerModuleStateTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "PSU ok
+                                Param1 - PSU number
+                                Param2 - PSU state: 0 - OK, 1 - no power supply, 2 - missing"
+                        ::= { smgOK 14 }
+                        
+                 smgOkH323NodeTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "Link to H323 adapter is OK"
+                        ::= { smgOK 16 }
+                        
+                 smgOkTemperatureTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No Tenperature alarm"
+                        ::= { smgOK 17 }
+                        
+                 smgOkMaintenanceTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No maintenance alarm
+                                param1: 
+									MAINTENANCE_ALARM_SS7_COT_FAIL = 1
+                                param2 - E1 stream number,
+                                param3 - E1 channel number"
+                        ::= { smgOK 18 } 
+
+                 smgOkSipAccessTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No SIP interface access alarm
+                                param1 - SIP interface number"
+                        ::= { smgOK 19 }     
+                        
+                 smgUpdateFwOk NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS current
+                        DESCRIPTION
+                                "descr = file + addr + OK"
+                        ::= { smgOK 20 }
+                        
+                 smgOkIpcOverloadTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No IPC overload"
+                        ::= { smgOK 51 }
+                        
+                smgOkProcOverloadTrap NOTIFICATION-TYPE
+                        OBJECTS {
+                                mcTrapExState,
+                                mcTrapLParam1,
+                                mcTrapLParam2,
+                                mcTrapLParam3,
+                                mcTrapID,
+                                mcTrapDescr}
+                        STATUS  current
+                        DESCRIPTION
+                                "No proc overload"
+                        ::= { smgOK 21 }
+
+                 
+                        
+                 
+                
+
+-- end of smg traps
+    
+-- CKP traps
+
+mccpAlarmTraps OBJECT IDENTIFIER		::= { eltrapGroup 30 }
+
+mccpConfigAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" config file alarm "
+	::= { mccpAlarmTraps 1 }
+
+mccpSlotAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" slot [param1] alarm "
+	::= { mccpAlarmTraps 2 }
+
+mccpLinksetAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" SS7 Linkset alarm [param1] "
+	::= { mccpAlarmTraps 3 }
+
+mccpStreamAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" Stream alarm at [param1:param2] state=%s [state] "
+	::= { mccpAlarmTraps 4 }
+
+mccpSS7LinkAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" SS7 Link alarm at [param1:param2] "
+	::= { mccpAlarmTraps 5 }
+
+mccpSyncAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" Low priority sync state or no sync "
+	::= { mccpAlarmTraps 6 }
+
+mccpIntfAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" V52-Interface number [param1] Alarm "
+	::= { mccpAlarmTraps 7 }
+
+mccpIntfSlotAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" 24AK slot [param2] on V52-Interface number [param1] Alarm "
+	::= { mccpAlarmTraps 8 }
+
+mccpSutdownSnmpdAlarmTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" shutdown snmpd "
+	::= { mccpAlarmTraps 17 }
+
+mccpOkTraps OBJECT IDENTIFIER		::= { eltrapGroup 31 }
+
+mccpConfigOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" config file is normal "
+	::= { mccpOkTraps 1 }
+
+mccpSlotOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" slot [param1] in work "
+	::= { mccpOkTraps 2 }
+
+mccpLinksetOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" SS7 Linkset in work [param1] "
+	::= { mccpOkTraps 3 }
+
+mccpStreamOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" Stream alarm at [param1:param2] in work "
+	::= { mccpOkTraps 4 }
+
+mccpSS7LinkOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" SS7 Link at [param1:param2] in work "
+	::= { mccpOkTraps 5 }
+
+mccpSyncOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" Normal sync state "
+	::= { mccpOkTraps 6 }
+
+mccpIntfOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" V52-Interface number [param1] is Normal "
+	::= { mccpOkTraps 7 }
+
+mccpIntfSlotOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" 24AK slot [param2] on V52-Interface number [param1] is Normal "
+	::= { mccpOkTraps 8 }
+
+mccpStartOkTrap NOTIFICATION-TYPE
+	OBJECTS {
+		mcTrapExState,
+		mcTrapLParam1,
+		mcTrapLParam2,
+		mcTrapLParam3,
+		mcTrapID,
+		mcTrapDescr }
+	STATUS current
+	DESCRIPTION
+		" MCCP started "
+	::= { mccpOkTraps 16 }
+
+-- end of CKP traps    
+        
+eltexShutdownTrap NOTIFICATION-TYPE
+        OBJECTS {
+                mcTrapExState,
+                mcTrapLParam1,
+                mcTrapLParam2,
+                mcTrapLParam3,
+                mcTrapID,
+                mcTrapDescr}
+        STATUS  current
+        DESCRIPTION
+                "Agent is being normally shutdown."
+        ::= { eltrapGroup 99 }
+
+eltrapNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                ponTeknovusONTAuthAlarmTrap,
+                ponTeknovusUplinkAlarmTrap,
+                ponTeknovusOpticalAlarmTrap,
+                ponTeknovusFanAlarmTrap,
+                ponTeknovusONTConfAlarmTrap,
+                ponTeknovusFlappingAlarmTrap,
+                ponTeknovusConfigSavedAlarmTrap,
+                ponTeknovusFirmwareUpdateAlarmTrap,
+                ponTeknovusRAMAlarmTrap,
+                ponTeknovusLoginAlarmTrap,
+                ponTeknovusDuplicateMacAlarmTrap,
+                ponTeknovusLoadAverageAlarmTrap,
+                ponTeknovusTemperatureAlarmTrap,
+                ponTeknovusONTPortBlockedAlarmTrap,
+                ponTeknovusONTAuthOkTrap,
+                ponTeknovusUplinkOkTrap,
+                ponTeknovusOpticalOkTrap,
+                ponTeknovusFanOkTrap,
+                ponTeknovusONTConfOKTrap,
+                ponTeknovusFlappingOkTrap,
+                ponTeknovusConfigSavedOkTrap,
+                ponTeknovusFirmwareUpdateOkTrap,
+                ponTeknovusRAMOkTrap,
+                ponTeknovusLoginOkTrap,
+                ponTeknovusLogoutOkTrap,
+                ponTeknovusSwitchConfigChangeTrap,
+                ponTeknovusLoadAverageOkTrap,
+                ponTeknovusTemperatureOkTrap,
+                ponTeknovusONTPortBlockedOkTrap,
+                ponTeknovusBoardRebootTrap,
+                ponTeknovusConfigMigrateAlarmTrap,
+				ponTeknovusConfigMigrateOkTrap,
+				ponTeknovusONTDeconfigureTrap,
+				ponTeknovusONTStateChangedTrap,
+				ponTeknovusONTConfigChangedTrap,
+                ponTeknovusConfigRereadTrap,
+                
+                fxs72VbatAlarmTrap,
+                fxs72VringAlarmTrap,
+                fxs72TemperatureAlarmTrap,
+                fxs72FanAlarmTrap,
+                fxs72SSwAlarmTrap,
+                fxs72PortAlarmTrap,
+                fxs72VbatOkTrap,
+                fxs72VringOkTrap,
+                fxs72TemperatureOkTrap,
+                fxs72FanOkTrap,
+                fxs72SSwOkTrap,
+                fxs72PortOkTrap,
+                fxs72VmodeSwitchTrap,
+                fxs72FansSwitchTrap,
+                fxs72BpuAlarmTrap,
+				fxs72updateFwFail,
+				fxs72BpuOkTrap,
+				fxs72updateFwOk,
+				fxs72TempmeasurementAlarmTrap,
+				fxs72TempmeasurementOkTrap,
+                
+				pp4LinkAlarmTrap,
+				pp4AutoNegotiationAlarmTrap,
+                pp4MemoryAlarmTrap,
+                pp4LoadAvgAlarmTrap,
+                pp4LoginAlarmTrap,
+                pp4LogoutAlarmTrap,
+                pp4LoadCpuAlarmTrap,
+                pp4DuplicationMacAlarmTrap,
+                pp4LinkFlapAlarmTrap,
+
+                pp4LinkOkTrap,
+                pp4AutoNegotiationOkTrap,
+                pp4MemoryOkTrap,
+                pp4LoadAvgOkTrap,
+                pp4LoginOkTrap,
+                pp4LogoutOkTrap,
+                pp4CommitOkTrap,
+                pp4SaveOkTrap,
+				pp4LinkFlapEndOkTrap,
+				pp4ConfigChangedOkTrap,
+				
+				pp4SaveAlarmTrap,
+				pp4BoardRemoveAlarmTrap,
+				pp4UnitRemoveAlarmTrap,
+				pp4PortCounterErrorFoundAlarmTrap,
+				pp4SyncDisallowedAlarmTrap,
+				pp4RebootUnitAlarmTrap,
+				pp4RebootStackAlarmTrap,
+				pp4RebootFwTimerAlarmTrap,
+				pp4FwUpdateAlarmTrap,
+				pp4FwConfirmNeededAlarmTrap,
+				pp4BoardAddOkTrap,
+				pp4UnitAddOkTrap,
+				pp4RoleChangedOkTrap,
+				pp4PortCounterErrorFreeOkTrap,
+				pp4SyncDisallowedOkTrap,
+				pp4ConfigRestoredOkTrap,
+				pp4RebootUnitOkTrap,
+				pp4FwUpdateOkTrap,
+                
+		mxa32DslLinkAlarmTrap,
+		mxa32EthLinkAlarmTrap,
+		mxa32TempAlarmTrap,
+		mxa32VoltAlarmTrap,
+		mxa32UserLoginTrap,
+		mxa32DslLinkOkTrap,
+		mxa32EthLinkOkTrap,
+		mxa32TempOkTrap,
+		mxa32VoltOkTrap,
+		mxa32UserLogoutTrap,
+
+		mxa64DslLinkAlarmTrap,
+		mxa64EthLinkAlarmTrap,
+		mxa64TempAlarmTrap,
+		mxa64VoltAlarmTrap,
+		mxa64UserLoginTrap,
+		mxa64DslLinkOkTrap,
+		mxa64EthLinkOkTrap,
+		mxa64TempOkTrap,
+		mxa64VoltOkTrap,
+		mxa64UserLogoutTrap,
+		
+
+		mxa24DslLinkAlarmTrap,
+		mxa24EthLinkAlarmTrap,
+		mxa24TempAlarmTrap,
+		mxa24VoltAlarmTrap,
+		mxa24UserLoginTrap,
+		mxa24DslLinkOkTrap,
+		mxa24EthLinkOkTrap,
+		mxa24TempOkTrap,
+		mxa24VoltOkTrap,
+		mxa24UserLogoutTrap,		
+                
+                omsOperationCommandAlarm,
+                omsOperationCommandOk,
+                
+                elcONTAuthAlarmTrap,
+                elcUplinkAlarmTrap,
+                elcOpticalAlarmTrap,
+                elcFanAlarmTrap,
+                elcONTConfAlarmTrap,
+                elcFlappingAlarmTrap,
+                elcConfigSavedAlarmTrap,
+                elcFirmwareUpdateAlarmTrap,
+                elcRAMAlarmTrap,
+                elcLoginAlarmTrap,
+                elcDuplicateMacAlarmTrap,
+                elcLoadAverageAlarmTrap,
+                elcTemperatureAlarmTrap,
+                elcONTAuthOkTrap,
+                elcUplinkOkTrap,
+                elcOpticalOkTrap,
+                elcFanOkTrap,
+                elcONTConfOKTrap,
+                elcFlappingOkTrap,
+                elcConfigSavedOkTrap,
+                elcFirmwareUpdateOkTrap,
+                elcRAMOkTrap,
+                elcLoginOkTrap,
+                elcLogoutOkTrap,
+                elcSwitchConfigChangeTrap,
+                elcLoadAverageOkTrap,
+                elcTemperatureOkTrap,
+                
+                smgAlarmConfigTrap,
+                smgAlarmSiptNodeTrap,
+                smgAlarmMspDevTrap,
+                smgAlarmLinkSetTrap,
+                smgAlarmStreamTrap,
+                smgAlarmSS7LinkTrap,
+                smgAlarmSyncTrap,
+                --smgAlarmStreamRemoteTrap,
+                --smgAlarmSyncPrioTrap,
+                smgOkConfigTrap,
+                smgOkSiptNodeTrap,
+                smgOkMspDevTrap,
+                smgOkLinkSetTrap,
+                smgOkStreamTrap,
+                smgOkSS7LinkTrap,
+                smgOkSyncTrap,
+                --smgOkStreamRemoteTrap,
+                --smgOkSyncPrioTrap,
+                smgAlarmCdrFtpTrap,
+				smgOkCdrFtpTrap,
+				smgUpdateFwFail,
+				smgUpdateFwOk,
+				smgAlarmMemoryLimitTrap,
+				smgAlarmSbcRegistrationExpiredTrap,
+				smgAlarmIpcOverloadTrap,
+				smgOkMemoryLimitTrap,
+				smgOkIpcOverloadTrap,
+				smgAlarmProcOverloadTrap,
+				smgOkProcOverloadTrap,
+
+		mccpConfigAlarmTrap,
+		mccpSlotAlarmTrap,
+		mccpLinksetAlarmTrap,
+		mccpStreamAlarmTrap,
+		mccpSS7LinkAlarmTrap,
+		mccpSyncAlarmTrap,
+		mccpIntfAlarmTrap,
+		mccpIntfSlotAlarmTrap,
+		mccpSutdownSnmpdAlarmTrap,
+		mccpConfigOkTrap,
+		mccpSlotOkTrap,
+		mccpLinksetOkTrap,
+		mccpStreamOkTrap,
+		mccpSS7LinkOkTrap,
+		mccpSyncOkTrap,
+		mccpIntfOkTrap,
+		mccpIntfSlotOkTrap,
+		mccpStartOkTrap,
+
+                eltexShutdownTrap
+                 }
+        STATUS  current
+        DESCRIPTION
+                ""
+        ::= { eltrapGroup 100 }
+
+eltrapObjectGroup OBJECT-GROUP
+        OBJECTS {
+                mcTrapExState,
+                mcTrapLParam1,
+                mcTrapLParam2,
+                mcTrapLParam3,
+                mcTrapID,
+                mcTrapDescr,
+                mcTrapRestoredAlarmID,
+                mcTrapSyncType,
+                mcReservedFlag }
+        STATUS  current
+        DESCRIPTION
+                ""
+        ::= { eltrapGroup 101 }
+        
+eltrapDepNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+			ponTeknovusEponAlarmTrap,
+             ponTeknovusUserLoginAlarmTrap,
+             ponTeknovusUserLoginOkTrap,
+             ponTeknovusEponOkTrap,
+             elcEponAlarmTrap,
+             elcUserLoginAlarmTrap,
+             elcUserLoginOkTrap,
+             elcEponOkTrap
+        }
+        STATUS  deprecated
+        DESCRIPTION
+                ""
+        ::= { eltrapGroup 103 }
+
+END
+
diff --git a/snmp_builder/mibs/ENTITY-MIB.mib b/snmp_builder/mibs/ENTITY-MIB.mib
new file mode 100644
index 0000000..3f9eb05
--- /dev/null
+++ b/snmp_builder/mibs/ENTITY-MIB.mib
@@ -0,0 +1,1411 @@
+ENTITY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2, NOTIFICATION-TYPE,
+    Integer32
+        FROM SNMPv2-SMI
+    TDomain, TAddress, TEXTUAL-CONVENTION,
+    AutonomousType, RowPointer, TimeStamp, TruthValue,
+    DateAndTime
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+entityMIB MODULE-IDENTITY
+    LAST-UPDATED "200508100000Z"
+    ORGANIZATION "IETF ENTMIB Working Group"
+    CONTACT-INFO
+            "        WG E-mail: entmib@ietf.org
+                     Mailing list subscription info:
+                       http://www.ietf.org/mailman/listinfo/entmib
+
+                     Andy Bierman
+                     ietf@andybierman.com
+
+                     Keith McCloghrie
+                     Cisco Systems Inc.
+                     170 West Tasman Drive
+                     San Jose, CA 95134
+
+                     +1 408-526-5260
+                     kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module for representing multiple logical
+            entities supported by a single SNMP agent.
+
+            Copyright (C) The Internet Society (2005).  This
+            version of this MIB module is part of RFC 4133; see
+            the RFC itself for full legal notices."
+
+    REVISION        "200508100000Z"
+    DESCRIPTION
+            "Initial Version of Entity MIB (Version 3).
+             This revision obsoletes RFC 2737.
+             Additions:
+               - cpu(12) enumeration added to PhysicalClass TC
+               - DISPLAY-HINT clause to PhysicalIndex TC
+               - PhysicalIndexOrZero TC
+               - entPhysicalMfgDate object
+               - entPhysicalUris object
+             Changes:
+               - entPhysicalContainedIn SYNTAX changed from
+                 INTEGER to PhysicalIndexOrZero
+
+             This version published as RFC 4133."
+
+    REVISION        "199912070000Z"
+    DESCRIPTION
+            "Initial Version of Entity MIB (Version 2).
+             This revision obsoletes RFC 2037.
+             This version published as RFC 2737."
+
+    REVISION        "199610310000Z"
+    DESCRIPTION
+            "Initial version (version 1), published as
+             RFC 2037."
+    ::= { mib-2 47 }
+
+entityMIBObjects OBJECT IDENTIFIER ::= { entityMIB 1 }
+
+-- MIB contains four groups
+entityPhysical OBJECT IDENTIFIER ::= { entityMIBObjects 1 }
+entityLogical  OBJECT IDENTIFIER ::= { entityMIBObjects 2 }
+entityMapping  OBJECT IDENTIFIER ::= { entityMIBObjects 3 }
+entityGeneral  OBJECT IDENTIFIER ::= { entityMIBObjects 4 }
+
+-- Textual Conventions
+PhysicalIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT      "d"
+    STATUS            current
+    DESCRIPTION
+            "An arbitrary value that uniquely identifies the physical
+            entity.  The value should be a small, positive integer.
+            Index values for different physical entities are not
+            necessarily contiguous."
+    SYNTAX Integer32 (1..2147483647)
+
+PhysicalIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT      "d"
+    STATUS            current
+    DESCRIPTION
+            "This textual convention is an extension of the
+            PhysicalIndex convention, which defines a greater than zero
+            value used to identify a physical entity.  This extension
+            permits the additional value of zero.  The semantics of the
+            value zero are object-specific and must, therefore, be
+            defined as part of the description of any object that uses
+            this syntax.  Examples of the usage of this extension are
+            situations where none or all physical entities need to be
+            referenced."
+    SYNTAX Integer32 (0..2147483647)
+
+PhysicalClass ::= TEXTUAL-CONVENTION
+    STATUS            current
+    DESCRIPTION
+            "An enumerated value which provides an indication of the
+            general hardware type of a particular physical entity.
+            There are no restrictions as to the number of
+            entPhysicalEntries of each entPhysicalClass, which must be
+            instantiated by an agent.
+
+            The enumeration 'other' is applicable if the physical entity
+            class is known, but does not match any of the supported
+            values.
+
+            The enumeration 'unknown' is applicable if the physical
+            entity class is unknown to the agent.
+
+            The enumeration 'chassis' is applicable if the physical
+            entity class is an overall container for networking
+            equipment.  Any class of physical entity, except a stack,
+            may be contained within a chassis; and a chassis may only
+            be contained within a stack.
+
+            The enumeration 'backplane' is applicable if the physical
+            entity class is some sort of device for aggregating and
+            forwarding networking traffic, such as a shared backplane in
+            a modular ethernet switch.  Note that an agent may model a
+            backplane as a single physical entity, which is actually
+            implemented as multiple discrete physical components (within
+            a chassis or stack).
+
+            The enumeration 'container' is applicable if the physical
+            entity class is capable of containing one or more removable
+            physical entities, possibly of different types.  For
+            example, each (empty or full) slot in a chassis will be
+            modeled as a container.  Note that all removable physical
+            entities should be modeled within a container entity, such
+            as field-replaceable modules, fans, or power supplies.  Note
+            that all known containers should be modeled by the agent,
+            including empty containers.
+
+            The enumeration 'powerSupply' is applicable if the physical
+            entity class is a power-supplying component.
+
+            The enumeration 'fan' is applicable if the physical entity
+            class is a fan or other heat-reduction component.
+
+            The enumeration 'sensor' is applicable if the physical
+            entity class is some sort of sensor, such as a temperature
+            sensor within a router chassis.
+
+            The enumeration 'module' is applicable if the physical
+            entity class is some sort of self-contained sub-system.  If
+            the enumeration 'module' is removable, then it should be
+            modeled within a container entity, otherwise it should be
+            modeled directly within another physical entity (e.g., a
+            chassis or another module).
+
+            The enumeration 'port' is applicable if the physical entity
+            class is some sort of networking port, capable of receiving
+            and/or transmitting networking traffic.
+
+            The enumeration 'stack' is applicable if the physical entity
+            class is some sort of super-container (possibly virtual),
+            intended to group together multiple chassis entities.  A
+            stack may be realized by a 'virtual' cable, a real
+            interconnect cable, attached to multiple chassis, or may in
+            fact be comprised of multiple interconnect cables.  A stack
+            should not be modeled within any other physical entities,
+            but a stack may be contained within another stack.  Only
+            chassis entities should be contained within a stack.
+
+            The enumeration 'cpu' is applicable if the physical entity
+            class is some sort of central processing unit."
+    SYNTAX      INTEGER  {
+       other(1),
+       unknown(2),
+       chassis(3),
+       backplane(4),
+       container(5),     -- e.g., chassis slot or daughter-card holder
+       powerSupply(6),
+       fan(7),
+       sensor(8),
+       module(9),        -- e.g., plug-in card or daughter-card
+       port(10),
+       stack(11),        -- e.g., stack of multiple chassis entities
+       cpu(12)
+    }
+
+SnmpEngineIdOrNone ::= TEXTUAL-CONVENTION
+    STATUS            current
+    DESCRIPTION
+            "A specially formatted SnmpEngineID string for use with the
+            Entity MIB.
+
+            If an instance of an object of SYNTAX SnmpEngineIdOrNone has
+            a non-zero length, then the object encoding and semantics
+            are defined by the SnmpEngineID textual convention (see STD
+            62, RFC 3411 [RFC3411]).
+
+            If an instance of an object of SYNTAX SnmpEngineIdOrNone
+            contains a zero-length string, then no appropriate
+            SnmpEngineID is associated with the logical entity (i.e.,
+            SNMPv3 is not supported)."
+    SYNTAX OCTET STRING (SIZE(0..32)) -- empty string or SnmpEngineID
+
+--           The Physical Entity Table
+entPhysicalTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF EntPhysicalEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per physical entity.  There is
+            always at least one row for an 'overall' physical entity."
+    ::= { entityPhysical 1 }
+
+entPhysicalEntry       OBJECT-TYPE
+    SYNTAX      EntPhysicalEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular physical entity.
+
+            Each entry provides objects (entPhysicalDescr,
+            entPhysicalVendorType, and entPhysicalClass) to help an NMS
+            identify and characterize the entry, and objects
+            (entPhysicalContainedIn and entPhysicalParentRelPos) to help
+            an NMS relate the particular entry to other entries in this
+            table."
+    INDEX   { entPhysicalIndex }
+    ::= { entPhysicalTable 1 }
+
+EntPhysicalEntry ::= SEQUENCE {
+      entPhysicalIndex          PhysicalIndex,
+      entPhysicalDescr          SnmpAdminString,
+      entPhysicalVendorType     AutonomousType,
+      entPhysicalContainedIn    PhysicalIndexOrZero,
+      entPhysicalClass          PhysicalClass,
+      entPhysicalParentRelPos   Integer32,
+      entPhysicalName           SnmpAdminString,
+      entPhysicalHardwareRev    SnmpAdminString,
+      entPhysicalFirmwareRev    SnmpAdminString,
+      entPhysicalSoftwareRev    SnmpAdminString,
+      entPhysicalSerialNum      SnmpAdminString,
+      entPhysicalMfgName        SnmpAdminString,
+      entPhysicalModelName      SnmpAdminString,
+      entPhysicalAlias          SnmpAdminString,
+      entPhysicalAssetID        SnmpAdminString,
+      entPhysicalIsFRU          TruthValue,
+      entPhysicalMfgDate        DateAndTime,
+      entPhysicalUris           OCTET STRING
+
+}
+
+entPhysicalIndex    OBJECT-TYPE
+    SYNTAX      PhysicalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The index for this entry."
+    ::= { entPhysicalEntry 1 }
+
+entPhysicalDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual description of physical entity.  This object
+            should contain a string that identifies the manufacturer's
+            name for the physical entity, and should be set to a
+            distinct value for each version or model of the physical
+            entity."
+    ::= { entPhysicalEntry 2 }
+
+entPhysicalVendorType OBJECT-TYPE
+    SYNTAX      AutonomousType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the vendor-specific hardware type of the
+            physical entity.  Note that this is different from the
+            definition of MIB-II's sysObjectID.
+
+            An agent should set this object to an enterprise-specific
+            registration identifier value indicating the specific
+            equipment type in detail.  The associated instance of
+            entPhysicalClass is used to indicate the general type of
+            hardware device.
+
+            If no vendor-specific registration identifier exists for
+            this physical entity, or the value is unknown by this agent,
+            then the value { 0 0 } is returned."
+    ::= { entPhysicalEntry 3 }
+
+entPhysicalContainedIn OBJECT-TYPE
+    SYNTAX      PhysicalIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of entPhysicalIndex for the physical entity which
+            'contains' this physical entity.  A value of zero indicates
+            this physical entity is not contained in any other physical
+            entity.  Note that the set of 'containment' relationships
+            define a strict hierarchy; that is, recursion is not
+            allowed.
+
+            In the event that a physical entity is contained by more
+            than one physical entity (e.g., double-wide modules), this
+            object should identify the containing entity with the lowest
+            value of entPhysicalIndex."
+    ::= { entPhysicalEntry 4 }
+
+entPhysicalClass OBJECT-TYPE
+    SYNTAX      PhysicalClass
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the general hardware type of the physical
+            entity.
+
+            An agent should set this object to the standard enumeration
+            value that most accurately indicates the general class of
+            the physical entity, or the primary class if there is more
+            than one entity.
+
+            If no appropriate standard registration identifier exists
+            for this physical entity, then the value 'other(1)' is
+            returned.  If the value is unknown by this agent, then the
+            value 'unknown(2)' is returned."
+    ::= { entPhysicalEntry 5 }
+
+entPhysicalParentRelPos OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the relative position of this 'child'
+            component among all its 'sibling' components.  Sibling
+            components are defined as entPhysicalEntries that share the
+            same instance values of each of the entPhysicalContainedIn
+            and entPhysicalClass objects.
+
+            An NMS can use this object to identify the relative ordering
+            for all sibling components of a particular parent
+            (identified by the entPhysicalContainedIn instance in each
+            sibling entry).
+
+            If possible, this value should match any external labeling
+            of the physical component.  For example, for a container
+            (e.g., card slot) labeled as 'slot #3',
+            entPhysicalParentRelPos should have the value '3'.  Note
+            that the entPhysicalEntry for the module plugged in slot 3
+            should have an entPhysicalParentRelPos value of '1'.
+
+            If the physical position of this component does not match
+            any external numbering or clearly visible ordering, then
+            user documentation or other external reference material
+            should be used to determine the parent-relative position.
+            If this is not possible, then the agent should assign a
+            consistent (but possibly arbitrary) ordering to a given set
+            of 'sibling' components, perhaps based on internal
+            representation of the components.
+
+            If the agent cannot determine the parent-relative position
+            for some reason, or if the associated value of
+            entPhysicalContainedIn is '0', then the value '-1' is
+            returned.  Otherwise, a non-negative integer is returned,
+            indicating the parent-relative position of this physical
+            entity.
+
+            Parent-relative ordering normally starts from '1' and
+            continues to 'N', where 'N' represents the highest
+            positioned child entity.  However, if the physical entities
+            (e.g., slots) are labeled from a starting position of zero,
+            then the first sibling should be associated with an
+            entPhysicalParentRelPos value of '0'.  Note that this
+            ordering may be sparse or dense, depending on agent
+            implementation.
+
+            The actual values returned are not globally meaningful, as
+            each 'parent' component may use different numbering
+            algorithms.  The ordering is only meaningful among siblings
+            of the same parent component.
+
+            The agent should retain parent-relative position values
+            across reboots, either through algorithmic assignment or use
+            of non-volatile storage."
+    ::= { entPhysicalEntry 6 }
+
+entPhysicalName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The textual name of the physical entity.  The value of this
+            object should be the name of the component as assigned by
+            the local device and should be suitable for use in commands
+            entered at the device's `console'.  This might be a text
+            name (e.g., `console') or a simple component number (e.g.,
+            port or module number, such as `1'), depending on the
+            physical component naming syntax of the device.
+
+            If there is no local name, or if this object is otherwise
+            not applicable, then this object contains a zero-length
+            string.
+
+            Note that the value of entPhysicalName for two physical
+            entities will be the same in the event that the console
+            interface does not distinguish between them, e.g., slot-1
+            and the card in slot-1."
+    ::= { entPhysicalEntry 7 }
+
+entPhysicalHardwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific hardware revision string for the
+            physical entity.  The preferred value is the hardware
+            revision identifier actually printed on the component itself
+            (if present).
+
+            Note that if revision information is stored internally in a
+            non-printable (e.g., binary) format, then the agent must
+            convert such information to a printable format, in an
+            implementation-specific manner.
+
+            If no specific hardware revision string is associated with
+            the physical component, or if this information is unknown to
+            the agent, then this object will contain a zero-length
+            string."
+    ::= { entPhysicalEntry 8 }
+
+entPhysicalFirmwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific firmware revision string for the
+            physical entity.
+
+            Note that if revision information is stored internally in a
+            non-printable (e.g., binary) format, then the agent must
+            convert such information to a printable format, in an
+            implementation-specific manner.
+
+            If no specific firmware programs are associated with the
+            physical component, or if this information is unknown to the
+            agent, then this object will contain a zero-length string."
+    ::= { entPhysicalEntry 9 }
+
+entPhysicalSoftwareRev    OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific software revision string for the
+            physical entity.
+
+            Note that if revision information is stored internally in a
+
+            non-printable (e.g., binary) format, then the agent must
+            convert such information to a printable format, in an
+            implementation-specific manner.
+
+            If no specific software programs are associated with the
+            physical component, or if this information is unknown to the
+            agent, then this object will contain a zero-length string."
+    ::= { entPhysicalEntry 10 }
+
+entPhysicalSerialNum   OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific serial number string for the physical
+            entity.  The preferred value is the serial number string
+            actually printed on the component itself (if present).
+
+            On the first instantiation of an physical entity, the value
+            of entPhysicalSerialNum associated with that entity is set
+            to the correct vendor-assigned serial number, if this
+            information is available to the agent.  If a serial number
+            is unknown or non-existent, the entPhysicalSerialNum will be
+            set to a zero-length string instead.
+
+            Note that implementations that can correctly identify the
+            serial numbers of all installed physical entities do not
+            need to provide write access to the entPhysicalSerialNum
+            object.  Agents which cannot provide non-volatile storage
+            for the entPhysicalSerialNum strings are not required to
+            implement write access for this object.
+
+            Not every physical component will have a serial number, or
+            even need one.  Physical entities for which the associated
+            value of the entPhysicalIsFRU object is equal to 'false(2)'
+            (e.g., the repeater ports within a repeater module), do not
+            need their own unique serial number.  An agent does not have
+            to provide write access for such entities, and may return a
+            zero-length string.
+
+            If write access is implemented for an instance of
+            entPhysicalSerialNum, and a value is written into the
+            instance, the agent must retain the supplied value in the
+            entPhysicalSerialNum instance (associated with the same
+            physical entity) for as long as that entity remains
+            instantiated.  This includes instantiations across all
+            re-initializations/reboots of the network management system,
+            including those resulting in a change of the physical
+
+            entity's entPhysicalIndex value."
+    ::= { entPhysicalEntry 11 }
+
+entPhysicalMfgName   OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The name of the manufacturer of this physical component.
+            The preferred value is the manufacturer name string actually
+            printed on the component itself (if present).
+
+            Note that comparisons between instances of the
+            entPhysicalModelName, entPhysicalFirmwareRev,
+            entPhysicalSoftwareRev, and the entPhysicalSerialNum
+            objects, are only meaningful amongst entPhysicalEntries with
+            the same value of entPhysicalMfgName.
+
+            If the manufacturer name string associated with the physical
+            component is unknown to the agent, then this object will
+            contain a zero-length string."
+    ::= { entPhysicalEntry 12 }
+
+entPhysicalModelName   OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor-specific model name identifier string associated
+            with this physical component.  The preferred value is the
+            customer-visible part number, which may be printed on the
+            component itself.
+
+            If the model name string associated with the physical
+            component is unknown to the agent, then this object will
+            contain a zero-length string."
+    ::= { entPhysicalEntry 13 }
+
+entPhysicalAlias    OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object is an 'alias' name for the physical entity, as
+            specified by a network manager, and provides a non-volatile
+            'handle' for the physical entity.
+
+            On the first instantiation of a physical entity, the value
+
+            of entPhysicalAlias associated with that entity is set to
+            the zero-length string.  However, the agent may set the
+            value to a locally unique default value, instead of a
+            zero-length string.
+
+            If write access is implemented for an instance of
+            entPhysicalAlias, and a value is written into the instance,
+            the agent must retain the supplied value in the
+            entPhysicalAlias instance (associated with the same physical
+            entity) for as long as that entity remains instantiated.
+            This includes instantiations across all
+            re-initializations/reboots of the network management system,
+            including those resulting in a change of the physical
+            entity's entPhysicalIndex value."
+    ::= { entPhysicalEntry 14 }
+
+entPhysicalAssetID OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object is a user-assigned asset tracking identifier
+            (as specified by a network manager) for the physical entity,
+            and provides non-volatile storage of this information.
+
+            On the first instantiation of a physical entity, the value
+            of entPhysicalAssetID associated with that entity is set to
+            the zero-length string.
+
+            Not every physical component will have an asset tracking
+            identifier, or even need one.  Physical entities for which
+            the associated value of the entPhysicalIsFRU object is equal
+            to 'false(2)' (e.g., the repeater ports within a repeater
+            module), do not need their own unique asset tracking
+            identifier.  An agent does not have to provide write access
+            for such entities, and may instead return a zero-length
+            string.
+
+            If write access is implemented for an instance of
+            entPhysicalAssetID, and a value is written into the
+            instance, the agent must retain the supplied value in the
+            entPhysicalAssetID instance (associated with the same
+            physical entity) for as long as that entity remains
+            instantiated.  This includes instantiations across all
+            re-initializations/reboots of the network management system,
+            including those resulting in a change of the physical
+            entity's entPhysicalIndex value.
+
+            If no asset tracking information is associated with the
+            physical component, then this object will contain a
+            zero-length string."
+    ::= { entPhysicalEntry 15 }
+
+entPhysicalIsFRU OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object indicates whether or not this physical entity
+            is considered a 'field replaceable unit' by the vendor.  If
+            this object contains the value 'true(1)' then this
+            entPhysicalEntry identifies a field replaceable unit.  For
+            all entPhysicalEntries that represent components
+            permanently contained within a field replaceable unit, the
+            value 'false(2)' should be returned for this object."
+    ::= { entPhysicalEntry 16 }
+
+entPhysicalMfgDate  OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object contains the date of manufacturing of the
+            managed entity.  If the manufacturing date is unknown or not
+            supported, the object is not instantiated.  The special
+            value '0000000000000000'H may also be returned in this
+            case."
+    ::= { entPhysicalEntry 17 }
+
+entPhysicalUris OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object contains additional identification information
+            about the physical entity.  The object contains URIs and,
+            therefore, the syntax of this object must conform to RFC
+            3986, section 2.
+
+            Multiple URIs may be present and are separated by white
+            space characters.  Leading and trailing white space
+            characters are ignored.
+
+            If no additional identification information is known
+            about the physical entity or supported, the object is not
+            instantiated.  A zero length octet string may also be
+
+            returned in this case."
+    REFERENCE
+            "RFC 3986, Uniform Resource Identifiers (URI): Generic
+            Syntax, section 2, August 1998."
+    ::= { entPhysicalEntry 18 }
+
+--           The Logical Entity Table
+entLogicalTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF EntLogicalEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one row per logical entity.  For agents
+            that implement more than one naming scope, at least one
+            entry must exist.  Agents which instantiate all MIB objects
+            within a single naming scope are not required to implement
+            this table."
+    ::= { entityLogical 1 }
+
+entLogicalEntry       OBJECT-TYPE
+    SYNTAX      EntLogicalEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular logical entity.  Entities
+            may be managed by this agent or other SNMP agents (possibly)
+            in the same chassis."
+    INDEX       { entLogicalIndex }
+    ::= { entLogicalTable 1 }
+
+EntLogicalEntry ::= SEQUENCE {
+      entLogicalIndex            Integer32,
+      entLogicalDescr            SnmpAdminString,
+      entLogicalType             AutonomousType,
+      entLogicalCommunity        OCTET STRING,
+      entLogicalTAddress         TAddress,
+      entLogicalTDomain          TDomain,
+      entLogicalContextEngineID  SnmpEngineIdOrNone,
+      entLogicalContextName      SnmpAdminString
+}
+
+entLogicalIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The value of this object uniquely identifies the logical
+            entity.  The value should be a small positive integer; index
+            values for different logical entities are not necessarily
+            contiguous."
+    ::= { entLogicalEntry 1 }
+
+entLogicalDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual description of the logical entity.  This object
+            should contain a string that identifies the manufacturer's
+            name for the logical entity, and should be set to a distinct
+            value for each version of the logical entity."
+    ::= { entLogicalEntry 2 }
+
+entLogicalType OBJECT-TYPE
+    SYNTAX      AutonomousType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the type of logical entity.  This will
+            typically be the OBJECT IDENTIFIER name of the node in the
+            SMI's naming hierarchy which represents the major MIB
+            module, or the majority of the MIB modules, supported by the
+            logical entity.  For example:
+               a logical entity of a regular host/router -> mib-2
+               a logical entity of a 802.1d bridge -> dot1dBridge
+               a logical entity of a 802.3 repeater -> snmpDot3RptrMgmt
+            If an appropriate node in the SMI's naming hierarchy cannot
+            be identified, the value 'mib-2' should be used."
+    ::= { entLogicalEntry 3 }
+
+entLogicalCommunity OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "An SNMPv1 or SNMPv2C community-string, which can be used to
+            access detailed management information for this logical
+            entity.  The agent should allow read access with this
+            community string (to an appropriate subset of all managed
+            objects) and may also return a community string based on the
+            privileges of the request used to read this object.  Note
+            that an agent may return a community string with read-only
+            privileges, even if this object is accessed with a
+            read-write community string.  However, the agent must take
+
+            care not to return a community string that allows more
+            privileges than the community string used to access this
+            object.
+
+            A compliant SNMP agent may wish to conserve naming scopes by
+            representing multiple logical entities in a single 'default'
+            naming scope.  This is possible when the logical entities,
+            represented by the same value of entLogicalCommunity, have
+            no object instances in common.  For example, 'bridge1' and
+            'repeater1' may be part of the main naming scope, but at
+            least one additional community string is needed to represent
+            'bridge2' and 'repeater2'.
+
+            Logical entities 'bridge1' and 'repeater1' would be
+            represented by sysOREntries associated with the 'default'
+            naming scope.
+
+            For agents not accessible via SNMPv1 or SNMPv2C, the value
+            of this object is the empty string.  This object may also
+            contain an empty string if a community string has not yet
+            been assigned by the agent, or if no community string with
+            suitable access rights can be returned for a particular SNMP
+            request.
+
+            Note that this object is deprecated.  Agents which implement
+            SNMPv3 access should use the entLogicalContextEngineID and
+            entLogicalContextName objects to identify the context
+            associated with each logical entity.  SNMPv3 agents may
+            return a zero-length string for this object, or may continue
+            to return a community string (e.g., tri-lingual agent
+            support)."
+    ::= { entLogicalEntry 4 }
+
+entLogicalTAddress OBJECT-TYPE
+    SYNTAX      TAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The transport service address by which the logical entity
+            receives network management traffic, formatted according to
+            the corresponding value of entLogicalTDomain.
+
+            For snmpUDPDomain, a TAddress is 6 octets long: the initial
+            4 octets contain the IP-address in network-byte order and
+            the last 2 contain the UDP port in network-byte order.
+            Consult 'Transport Mappings for the Simple Network
+            Management Protocol' (STD 62, RFC 3417 [RFC3417]) for
+            further information on snmpUDPDomain."
+    ::= { entLogicalEntry 5 }
+
+entLogicalTDomain OBJECT-TYPE
+    SYNTAX      TDomain
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Indicates the kind of transport service by which the
+            logical entity receives network management traffic.
+            Possible values for this object are presently found in the
+            Transport Mappings for Simple Network Management Protocol'
+            (STD 62, RFC 3417 [RFC3417])."
+    ::= { entLogicalEntry 6 }
+
+entLogicalContextEngineID    OBJECT-TYPE
+    SYNTAX      SnmpEngineIdOrNone
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The authoritative contextEngineID that can be used to send
+            an SNMP message concerning information held by this logical
+            entity, to the address specified by the associated
+            'entLogicalTAddress/entLogicalTDomain' pair.
+
+            This object, together with the associated
+            entLogicalContextName object, defines the context associated
+            with a particular logical entity, and allows access to SNMP
+            engines identified by a contextEngineId and contextName
+            pair.
+
+            If no value has been configured by the agent, a zero-length
+            string is returned, or the agent may choose not to
+            instantiate this object at all."
+    ::= { entLogicalEntry 7 }
+
+entLogicalContextName    OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The contextName that can be used to send an SNMP message
+            concerning information held by this logical entity, to the
+            address specified by the associated
+            'entLogicalTAddress/entLogicalTDomain' pair.
+
+            This object, together with the associated
+            entLogicalContextEngineID object, defines the context
+            associated with a particular logical entity, and allows
+
+            access to SNMP engines identified by a contextEngineId and
+            contextName pair.
+
+            If no value has been configured by the agent, a zero-length
+            string is returned, or the agent may choose not to
+            instantiate this object at all."
+    ::= { entLogicalEntry 8 }
+
+entLPMappingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF EntLPMappingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains zero or more rows of logical entity to
+            physical equipment associations.  For each logical entity
+            known by this agent, there are zero or more mappings to the
+            physical resources, which are used to realize that logical
+            entity.
+
+            An agent should limit the number and nature of entries in
+            this table such that only meaningful and non-redundant
+            information is returned.  For example, in a system that
+            contains a single power supply, mappings between logical
+            entities and the power supply are not useful and should not
+            be included.
+
+            Also, only the most appropriate physical component, which is
+            closest to the root of a particular containment tree, should
+            be identified in an entLPMapping entry.
+
+            For example, suppose a bridge is realized on a particular
+            module, and all ports on that module are ports on this
+            bridge.  A mapping between the bridge and the module would
+            be useful, but additional mappings between the bridge and
+            each of the ports on that module would be redundant (because
+            the entPhysicalContainedIn hierarchy can provide the same
+            information).  On the other hand, if more than one bridge
+            were utilizing ports on this module, then mappings between
+            each bridge and the ports it used would be appropriate.
+
+            Also, in the case of a single backplane repeater, a mapping
+            for the backplane to the single repeater entity is not
+            necessary."
+    ::= { entityMapping 1 }
+
+entLPMappingEntry       OBJECT-TYPE
+    SYNTAX      EntLPMappingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular logical entity to physical
+            equipment association.  Note that the nature of the
+            association is not specifically identified in this entry.
+            It is expected that sufficient information exists in the
+            MIBs used to manage a particular logical entity to infer how
+            physical component information is utilized."
+    INDEX       { entLogicalIndex, entLPPhysicalIndex }
+    ::= { entLPMappingTable 1 }
+
+EntLPMappingEntry ::= SEQUENCE {
+      entLPPhysicalIndex         PhysicalIndex
+}
+
+entLPPhysicalIndex OBJECT-TYPE
+    SYNTAX      PhysicalIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of this object identifies the index value of a
+            particular entPhysicalEntry associated with the indicated
+            entLogicalEntity."
+    ::= { entLPMappingEntry 1 }
+
+-- logical entity/component to alias table
+entAliasMappingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF EntAliasMappingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains zero or more rows, representing
+            mappings of logical entity and physical component to
+            external MIB identifiers.  Each physical port in the system
+            may be associated with a mapping to an external identifier,
+            which itself is associated with a particular logical
+            entity's naming scope.  A 'wildcard' mechanism is provided
+            to indicate that an identifier is associated with more than
+            one logical entity."
+    ::= { entityMapping 2 }
+
+entAliasMappingEntry       OBJECT-TYPE
+    SYNTAX      EntAliasMappingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular physical equipment, logical
+
+            entity to external identifier binding.  Each logical
+            entity/physical component pair may be associated with one
+            alias mapping.  The logical entity index may also be used as
+            a 'wildcard' (refer to the entAliasLogicalIndexOrZero object
+            DESCRIPTION clause for details.)
+
+            Note that only entPhysicalIndex values that represent
+            physical ports (i.e., associated entPhysicalClass value is
+            'port(10)') are permitted to exist in this table."
+    INDEX { entPhysicalIndex, entAliasLogicalIndexOrZero }
+    ::= { entAliasMappingTable 1 }
+
+EntAliasMappingEntry ::= SEQUENCE {
+      entAliasLogicalIndexOrZero        Integer32,
+      entAliasMappingIdentifier         RowPointer
+}
+
+entAliasLogicalIndexOrZero OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The value of this object identifies the logical entity
+            that defines the naming scope for the associated instance
+            of the 'entAliasMappingIdentifier' object.
+
+            If this object has a non-zero value, then it identifies the
+            logical entity named by the same value of entLogicalIndex.
+
+            If this object has a value of zero, then the mapping between
+            the physical component and the alias identifier for this
+            entAliasMapping entry is associated with all unspecified
+            logical entities.  That is, a value of zero (the default
+            mapping) identifies any logical entity that does not have
+            an explicit entry in this table for a particular
+            entPhysicalIndex/entAliasMappingIdentifier pair.
+
+            For example, to indicate that a particular interface (e.g.,
+            physical component 33) is identified by the same value of
+            ifIndex for all logical entities, the following instance
+            might exist:
+
+                    entAliasMappingIdentifier.33.0 = ifIndex.5
+
+            In the event an entPhysicalEntry is associated differently
+            for some logical entities, additional entAliasMapping
+            entries may exist, e.g.:
+
+                    entAliasMappingIdentifier.33.0 = ifIndex.6
+                    entAliasMappingIdentifier.33.4 =  ifIndex.1
+                    entAliasMappingIdentifier.33.5 =  ifIndex.1
+                    entAliasMappingIdentifier.33.10 = ifIndex.12
+
+            Note that entries with non-zero entAliasLogicalIndexOrZero
+            index values have precedence over zero-indexed entries.  In
+            this example, all logical entities except 4, 5, and 10,
+            associate physical entity 33 with ifIndex.6."
+    ::= { entAliasMappingEntry 1 }
+
+entAliasMappingIdentifier OBJECT-TYPE
+    SYNTAX      RowPointer
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of this object identifies a particular conceptual
+            row associated with the indicated entPhysicalIndex and
+            entLogicalIndex pair.
+
+            Because only physical ports are modeled in this table, only
+            entries that represent interfaces or ports are allowed.  If
+            an ifEntry exists on behalf of a particular physical port,
+            then this object should identify the associated 'ifEntry'.
+            For repeater ports, the appropriate row in the
+            'rptrPortGroupTable' should be identified instead.
+
+            For example, suppose a physical port was represented by
+            entPhysicalEntry.3, entLogicalEntry.15 existed for a
+            repeater, and entLogicalEntry.22 existed for a bridge.  Then
+            there might be two related instances of
+            entAliasMappingIdentifier:
+               entAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2
+               entAliasMappingIdentifier.3.22 == ifIndex.17
+            It is possible that other mappings (besides interfaces and
+            repeater ports) may be defined in the future, as required.
+
+            Bridge ports are identified by examining the Bridge MIB and
+            appropriate ifEntries associated with each 'dot1dBasePort',
+            and are thus not represented in this table."
+    ::= { entAliasMappingEntry 2 }
+
+-- physical mapping table
+entPhysicalContainsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF EntPhysicalContainsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table that exposes the container/'containee'
+            relationships between physical entities.  This table
+            provides all the information found by constructing the
+            virtual containment tree for a given entPhysicalTable, but
+            in a more direct format.
+
+            In the event a physical entity is contained by more than one
+            other physical entity (e.g., double-wide modules), this
+            table should include these additional mappings, which cannot
+            be represented in the entPhysicalTable virtual containment
+            tree."
+    ::= { entityMapping 3 }
+
+entPhysicalContainsEntry OBJECT-TYPE
+    SYNTAX      EntPhysicalContainsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A single container/'containee' relationship."
+    INDEX       { entPhysicalIndex, entPhysicalChildIndex }
+    ::= { entPhysicalContainsTable 1 }
+
+EntPhysicalContainsEntry ::= SEQUENCE {
+      entPhysicalChildIndex     PhysicalIndex
+}
+
+entPhysicalChildIndex OBJECT-TYPE
+    SYNTAX      PhysicalIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of entPhysicalIndex for the contained physical
+            entity."
+    ::= { entPhysicalContainsEntry 1 }
+
+-- last change time stamp for the whole MIB
+entLastChangeTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time a conceptual row is
+            created, modified, or deleted in any of these tables:
+                    - entPhysicalTable
+                    - entLogicalTable
+                    - entLPMappingTable
+                    - entAliasMappingTable
+
+                    - entPhysicalContainsTable
+            "
+    ::= { entityGeneral 1 }
+
+-- Entity MIB Trap Definitions
+entityMIBTraps      OBJECT IDENTIFIER ::= { entityMIB 2 }
+entityMIBTrapPrefix OBJECT IDENTIFIER ::= { entityMIBTraps 0 }
+
+entConfigChange NOTIFICATION-TYPE
+    STATUS             current
+    DESCRIPTION
+            "An entConfigChange notification is generated when the value
+            of entLastChangeTime changes.  It can be utilized by an NMS
+            to trigger logical/physical entity table maintenance polls.
+
+            An agent should not generate more than one entConfigChange
+            'notification-event' in a given time interval (five seconds
+            is the suggested default).  A 'notification-event' is the
+            transmission of a single trap or inform PDU to a list of
+            notification destinations.
+
+            If additional configuration changes occur within the
+            throttling period, then notification-events for these
+            changes should be suppressed by the agent until the current
+            throttling period expires.  At the end of a throttling
+            period, one notification-event should be generated if any
+            configuration changes occurred since the start of the
+            throttling period.  In such a case, another throttling
+            period is started right away.
+
+            An NMS should periodically check the value of
+            entLastChangeTime to detect any missed entConfigChange
+            notification-events, e.g., due to throttling or transmission
+            loss."
+   ::= { entityMIBTrapPrefix 1 }
+
+-- conformance information
+entityConformance OBJECT IDENTIFIER ::= { entityMIB 3 }
+
+entityCompliances OBJECT IDENTIFIER ::= { entityConformance 1 }
+entityGroups      OBJECT IDENTIFIER ::= { entityConformance 2 }
+
+-- compliance statements
+entityCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for SNMP entities that implement
+            version 1 of the Entity MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           entityPhysicalGroup,
+                           entityLogicalGroup,
+                           entityMappingGroup,
+                           entityGeneralGroup,
+                           entityNotificationsGroup
+        }
+    ::= { entityCompliances 1 }
+
+entity2Compliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for SNMP entities that implement
+            version 2 of the Entity MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           entityPhysicalGroup,
+                           entityPhysical2Group,
+                           entityGeneralGroup,
+                           entityNotificationsGroup
+        }
+        GROUP entityLogical2Group
+        DESCRIPTION
+            "Implementation of this group is not mandatory for agents
+            that model all MIB object instances within a single naming
+            scope."
+
+        GROUP entityMappingGroup
+        DESCRIPTION
+            "Implementation of the entPhysicalContainsTable is mandatory
+            for all agents.  Implementation of the entLPMappingTable and
+            entAliasMappingTables are not mandatory for agents that
+            model all MIB object instances within a single naming scope.
+
+            Note that the entAliasMappingTable may be useful for all
+            agents; however, implementation of the entityLogicalGroup or
+            entityLogical2Group is required to support this table."
+
+        OBJECT entPhysicalSerialNum
+        MIN-ACCESS   not-accessible
+        DESCRIPTION
+            "Read and write access is not required for agents that
+            cannot identify serial number information for physical
+            entities, and/or cannot provide non-volatile storage for
+
+            NMS-assigned serial numbers.
+
+            Write access is not required for agents that can identify
+            serial number information for physical entities, but cannot
+            provide non-volatile storage for NMS-assigned serial
+            numbers.
+
+            Write access is not required for physical entities for which
+            the associated value of the entPhysicalIsFRU object is equal
+            to 'false(2)'."
+
+        OBJECT entPhysicalAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is required only if the associated
+            entPhysicalClass value is equal to 'chassis(3)'."
+
+        OBJECT entPhysicalAssetID
+        MIN-ACCESS   not-accessible
+        DESCRIPTION
+            "Read and write access is not required for agents that
+            cannot provide non-volatile storage for NMS-assigned asset
+            identifiers.
+
+            Write access is not required for physical entities for which
+            the associated value of the entPhysicalIsFRU object is equal
+            to 'false(2)'."
+
+        OBJECT entPhysicalClass
+        SYNTAX INTEGER {
+            other(1),
+            unknown(2),
+            chassis(3),
+            backplane(4),
+            container(5),
+            powerSupply(6),
+            fan(7),
+            sensor(8),
+            module(9),
+            port(10),
+            stack(11)
+        }
+        DESCRIPTION
+            "Implementation of the 'cpu(12)' enumeration is not
+            required."
+    ::= { entityCompliances 2 }
+
+entity3Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities that implement
+            version 3 of the Entity MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           entityPhysicalGroup,
+                           entityPhysical2Group,
+                           entityPhysical3Group,
+                           entityGeneralGroup,
+                           entityNotificationsGroup
+        }
+        GROUP entityLogical2Group
+        DESCRIPTION
+            "Implementation of this group is not mandatory for agents
+            that model all MIB object instances within a single naming
+            scope."
+
+        GROUP entityMappingGroup
+        DESCRIPTION
+            "Implementation of the entPhysicalContainsTable is mandatory
+            for all agents.  Implementation of the entLPMappingTable and
+            entAliasMappingTables are not mandatory for agents that
+            model all MIB object instances within a single naming scope.
+
+            Note that the entAliasMappingTable may be useful for all
+            agents; however, implementation of the entityLogicalGroup or
+            entityLogical2Group is required to support this table."
+
+        OBJECT entPhysicalSerialNum
+        MIN-ACCESS   not-accessible
+        DESCRIPTION
+            "Read and write access is not required for agents that
+            cannot identify serial number information for physical
+            entities, and/or cannot provide non-volatile storage for
+            NMS-assigned serial numbers.
+
+            Write access is not required for agents that can identify
+            serial number information for physical entities, but cannot
+            provide non-volatile storage for NMS-assigned serial
+            numbers.
+
+            Write access is not required for physical entities for
+            which the associated value of the entPhysicalIsFRU object
+            is equal to 'false(2)'."
+
+        OBJECT entPhysicalAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is required only if the associated
+            entPhysicalClass value is equal to 'chassis(3)'."
+
+        OBJECT entPhysicalAssetID
+        MIN-ACCESS   not-accessible
+        DESCRIPTION
+            "Read and write access is not required for agents that
+            cannot provide non-volatile storage for NMS-assigned asset
+            identifiers.
+
+            Write access is not required for physical entities for which
+            the associated value of entPhysicalIsFRU is equal to
+            'false(2)'."
+    ::= { entityCompliances 3 }
+
+-- MIB groupings
+entityPhysicalGroup    OBJECT-GROUP
+    OBJECTS {
+              entPhysicalDescr,
+              entPhysicalVendorType,
+              entPhysicalContainedIn,
+              entPhysicalClass,
+              entPhysicalParentRelPos,
+              entPhysicalName
+            }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects used to represent physical
+            system components, for which a single agent provides
+            management information."
+    ::= { entityGroups 1 }
+
+entityLogicalGroup    OBJECT-GROUP
+    OBJECTS {
+              entLogicalDescr,
+              entLogicalType,
+              entLogicalCommunity,
+              entLogicalTAddress,
+              entLogicalTDomain
+            }
+    STATUS  deprecated
+    DESCRIPTION
+            "The collection of objects used to represent the list of
+            logical entities, for which a single agent provides
+            management information."
+    ::= { entityGroups 2 }
+
+entityMappingGroup    OBJECT-GROUP
+    OBJECTS {
+              entLPPhysicalIndex,
+              entAliasMappingIdentifier,
+              entPhysicalChildIndex
+            }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects used to represent the
+            associations between multiple logical entities, physical
+            components, interfaces, and port identifiers, for which a
+            single agent provides management information."
+    ::= { entityGroups 3 }
+
+entityGeneralGroup    OBJECT-GROUP
+    OBJECTS {
+              entLastChangeTime
+            }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects used to represent general entity
+            information, for which a single agent provides management
+            information."
+    ::= { entityGroups 4 }
+
+entityNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { entConfigChange }
+    STATUS        current
+    DESCRIPTION
+            "The collection of notifications used to indicate Entity MIB
+            data consistency and general status information."
+    ::= { entityGroups 5 }
+
+entityPhysical2Group    OBJECT-GROUP
+    OBJECTS {
+              entPhysicalHardwareRev,
+              entPhysicalFirmwareRev,
+              entPhysicalSoftwareRev,
+              entPhysicalSerialNum,
+              entPhysicalMfgName,
+              entPhysicalModelName,
+              entPhysicalAlias,
+              entPhysicalAssetID,
+              entPhysicalIsFRU
+            }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects used to represent physical
+            system components, for which a single agent provides
+            management information.  This group augments the objects
+            contained in the entityPhysicalGroup."
+    ::= { entityGroups 6 }
+
+entityLogical2Group    OBJECT-GROUP
+    OBJECTS {
+              entLogicalDescr,
+              entLogicalType,
+              entLogicalTAddress,
+              entLogicalTDomain,
+              entLogicalContextEngineID,
+              entLogicalContextName
+            }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects used to represent the
+            list of logical entities, for which a single SNMP entity
+            provides management information."
+    ::= { entityGroups 7 }
+
+entityPhysical3Group    OBJECT-GROUP
+    OBJECTS {
+              entPhysicalMfgDate,
+              entPhysicalUris
+            }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects used to represent physical
+            system components, for which a single agent provides
+            management information.  This group augments the objects
+            contained in the entityPhysicalGroup."
+    ::= { entityGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/ENTITY-SENSOR-MIB.mib b/snmp_builder/mibs/ENTITY-SENSOR-MIB.mib
new file mode 100644
index 0000000..3d689e8
--- /dev/null
+++ b/snmp_builder/mibs/ENTITY-SENSOR-MIB.mib
@@ -0,0 +1,440 @@
+ENTITY-SENSOR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,
+        Integer32, Unsigned32, mib-2
+                FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF
+        TEXTUAL-CONVENTION, TimeStamp
+                FROM SNMPv2-TC
+        entPhysicalIndex, entityPhysicalGroup
+                FROM ENTITY-MIB
+        SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB;
+
+entitySensorMIB MODULE-IDENTITY
+    LAST-UPDATED    "200212160000Z"
+    ORGANIZATION    "IETF Entity MIB Working Group"
+    CONTACT-INFO
+            "        Andy Bierman
+                     Cisco Systems, Inc.
+                Tel: +1 408-527-3711
+             E-mail: abierman@cisco.com
+             Postal: 170 West Tasman Drive
+                     San Jose, CA USA 95134
+
+                     Dan Romascanu
+                     Avaya Inc.
+                Tel: +972-3-645-8414
+              Email: dromasca@avaya.com
+             Postal: Atidim technology Park, Bldg. #3
+                     Tel Aviv, Israel, 61131
+
+                     K.C. Norseth
+                     L-3 Communications
+                Tel: +1 801-594-2809
+              Email: kenyon.c.norseth@L-3com.com
+             Postal: 640 N. 2200 West.
+
+                     Salt Lake City, Utah 84116-0850
+
+             Send comments to <entmib@ietf.org>
+             Mailing list subscription info:
+               http://www.ietf.org/mailman/listinfo/entmib "
+    DESCRIPTION
+            "This module defines Entity MIB extensions for physical
+             sensors.
+
+             Copyright (C) The Internet Society (2002). This version
+             of this MIB module is part of RFC 3433; see the RFC
+             itself for full legal notices."
+
+    REVISION        "200212160000Z"
+    DESCRIPTION
+            "Initial version of the Entity Sensor MIB module, published
+             as RFC 3433."
+    ::= { mib-2 99 }
+
+entitySensorObjects              OBJECT IDENTIFIER
+     ::= { entitySensorMIB 1 }
+
+-- entitySensorNotifications        OBJECT IDENTIFIER
+--     ::= { entitySensorMIB 2 }
+entitySensorConformance          OBJECT IDENTIFIER
+     ::= { entitySensorMIB 3 }
+
+--
+-- Textual Conventions
+--
+
+EntitySensorDataType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An object using this data type represents the Entity Sensor
+            measurement data type associated with a physical sensor
+            value. The actual data units are determined by examining an
+            object of this type together with the associated
+            EntitySensorDataScale object.
+
+            An object of this type SHOULD be defined together with
+            objects of type EntitySensorDataScale and
+            EntitySensorPrecision.  Together, associated objects of
+            these three types are used to identify the semantics of an
+            object of type EntitySensorValue.
+
+            Valid values are:
+
+               other(1):        a measure other than those listed below
+               unknown(2):      unknown measurement, or arbitrary,
+                                relative numbers
+               voltsAC(3):      electric potential
+               voltsDC(4):      electric potential
+               amperes(5):      electric current
+               watts(6):        power
+               hertz(7):        frequency
+               celsius(8):      temperature
+               percentRH(9):    percent relative humidity
+               rpm(10):         shaft revolutions per minute
+               cmm(11),:        cubic meters per minute (airflow)
+               truthvalue(12):  value takes { true(1), false(2) }
+            "
+    SYNTAX INTEGER {
+        other(1),
+        unknown(2),
+        voltsAC(3),
+        voltsDC(4),
+        amperes(5),
+        watts(6),
+        hertz(7),
+        celsius(8),
+        percentRH(9),
+        rpm(10),
+        cmm(11),
+        truthvalue(12)
+    }
+
+EntitySensorDataScale ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An object using this data type represents a data scaling
+            factor, represented with an International System of Units
+            (SI) prefix.  The actual data units are determined by
+            examining an object of this type together with the
+            associated EntitySensorDataType object.
+
+            An object of this type SHOULD be defined together with
+            objects of type EntitySensorDataType and
+            EntitySensorPrecision.  Together, associated objects of
+            these three types are used to identify the semantics of an
+            object of type EntitySensorValue."
+    REFERENCE
+            "The International System of Units (SI),
+            National Institute of Standards and Technology,
+            Spec. Publ. 330, August 1991."
+    SYNTAX INTEGER {
+        yocto(1),   -- 10^-24
+        zepto(2),   -- 10^-21
+        atto(3),    -- 10^-18
+        femto(4),   -- 10^-15
+        pico(5),    -- 10^-12
+        nano(6),    -- 10^-9
+        micro(7),   -- 10^-6
+        milli(8),   -- 10^-3
+        units(9),   -- 10^0
+        kilo(10),   -- 10^3
+        mega(11),   -- 10^6
+        giga(12),   -- 10^9
+        tera(13),   -- 10^12
+        exa(14),    -- 10^15
+        peta(15),   -- 10^18
+        zetta(16),  -- 10^21
+        yotta(17)   -- 10^24
+    }
+
+EntitySensorPrecision ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An object using this data type represents a sensor
+            precision range.
+
+            An object of this type SHOULD be defined together with
+            objects of type EntitySensorDataType and
+            EntitySensorDataScale.  Together, associated objects of
+            these three types are used to identify the semantics of an
+            object of type EntitySensorValue.
+
+            If an object of this type contains a value in the range 1 to
+            9, it represents the number of decimal places in the
+            fractional part of an associated EntitySensorValue fixed-
+            point number.
+
+            If an object of this type contains a value in the range -8
+            to -1, it represents the number of accurate digits in the
+            associated EntitySensorValue fixed-point number.
+
+            The value zero indicates the associated EntitySensorValue
+            object is not a fixed-point number.
+
+            Agent implementors must choose a value for the associated
+            EntitySensorPrecision object so that the precision and
+
+            accuracy of the associated EntitySensorValue object is
+            correctly indicated.
+
+            For example, a physical entity representing a temperature
+            sensor that can measure 0 degrees to 100 degrees C in 0.1
+            degree increments, +/- 0.05 degrees, would have an
+            EntitySensorPrecision value of '1', an EntitySensorDataScale
+            value of 'units(9)', and an EntitySensorValue ranging from
+            '0' to '1000'.  The EntitySensorValue would be interpreted
+            as 'degrees C * 10'."
+    SYNTAX Integer32 (-8..9)
+
+EntitySensorValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An object using this data type represents an Entity Sensor
+            value.
+            An object of this type SHOULD be defined together with
+            objects of type EntitySensorDataType, EntitySensorDataScale
+            and EntitySensorPrecision.  Together, associated objects of
+            those three types are used to identify the semantics of an
+            object of this data type.
+
+            The semantics of an object using this data type are
+            determined by the value of the associated
+            EntitySensorDataType object.
+
+            If the associated EntitySensorDataType object is equal to
+            'voltsAC(3)', 'voltsDC(4)', 'amperes(5)', 'watts(6),
+            'hertz(7)', 'celsius(8)', or 'cmm(11)', then an object of
+            this type MUST contain a fixed point number ranging from
+            -999,999,999 to +999,999,999.  The value -1000000000
+            indicates an underflow error. The value +1000000000
+            indicates an overflow error.  The EntitySensorPrecision
+            indicates how many fractional digits are represented in the
+            associated EntitySensorValue object.
+
+            If the associated EntitySensorDataType object is equal to
+            'percentRH(9)', then an object of this type MUST contain a
+            number ranging from 0 to 100.
+
+            If the associated EntitySensorDataType object is equal to
+            'rpm(10)', then an object of this type MUST contain a number
+            ranging from -999,999,999 to +999,999,999.
+
+            If the associated EntitySensorDataType object is equal to
+            'truthvalue(12)', then an object of this type MUST contain
+            either the value 'true(1)' or the value 'false(2)'.
+
+            If the associated EntitySensorDataType object is equal to
+            'other(1)' or unknown(2)', then an object of this type MUST
+            contain a number ranging from -1000000000 to 1000000000."
+    SYNTAX Integer32 (-1000000000..1000000000)
+
+EntitySensorStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An object using this data type represents the operational
+            status of a physical sensor.
+
+            The value 'ok(1)' indicates that the agent can obtain the
+            sensor value.
+
+            The value 'unavailable(2)' indicates that the agent
+            presently cannot obtain the sensor value.
+
+            The value 'nonoperational(3)' indicates that the agent
+            believes the sensor is broken.  The sensor could have a hard
+            failure (disconnected wire), or a soft failure such as out-
+            of-range, jittery, or wildly fluctuating readings."
+    SYNTAX INTEGER {
+        ok(1),
+        unavailable(2),
+        nonoperational(3)
+    }
+
+--
+-- Entity Sensor Table
+--
+
+entPhySensorTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF EntPhySensorEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+            "This table contains one row per physical sensor represented
+            by an associated row in the entPhysicalTable."
+    ::= { entitySensorObjects 1 }
+
+entPhySensorEntry OBJECT-TYPE
+    SYNTAX        EntPhySensorEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+            "Information about a particular physical sensor.
+
+            An entry in this table describes the present reading of a
+            sensor, the measurement units and scale, and sensor
+            operational status.
+
+            Entries are created in this table by the agent.  An entry
+            for each physical sensor SHOULD be created at the same time
+            as the associated entPhysicalEntry.  An entry SHOULD be
+            destroyed if the associated entPhysicalEntry is destroyed."
+    INDEX  { entPhysicalIndex }    -- SPARSE-AUGMENTS
+    ::= { entPhySensorTable 1 }
+
+EntPhySensorEntry ::= SEQUENCE {
+        entPhySensorType            EntitySensorDataType,
+        entPhySensorScale           EntitySensorDataScale,
+        entPhySensorPrecision       EntitySensorPrecision,
+        entPhySensorValue           EntitySensorValue,
+        entPhySensorOperStatus      EntitySensorStatus,
+        entPhySensorUnitsDisplay    SnmpAdminString,
+        entPhySensorValueTimeStamp  TimeStamp,
+        entPhySensorValueUpdateRate Unsigned32
+}
+
+entPhySensorType OBJECT-TYPE
+    SYNTAX        EntitySensorDataType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The type of data returned by the associated
+            entPhySensorValue object.
+
+            This object SHOULD be set by the agent during entry
+            creation, and the value SHOULD NOT change during operation."
+    ::= { entPhySensorEntry 1 }
+
+entPhySensorScale OBJECT-TYPE
+    SYNTAX        EntitySensorDataScale
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The exponent to apply to values returned by the associated
+            entPhySensorValue object.
+
+            This object SHOULD be set by the agent during entry
+            creation, and the value SHOULD NOT change during operation."
+    ::= { entPhySensorEntry 2 }
+
+entPhySensorPrecision OBJECT-TYPE
+    SYNTAX        EntitySensorPrecision
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The number of decimal places of precision in fixed-point
+            sensor values returned by the associated entPhySensorValue
+            object.
+
+            This object SHOULD be set to '0' when the associated
+            entPhySensorType value is not a fixed-point type: e.g.,
+            'percentRH(9)', 'rpm(10)', 'cmm(11)', or 'truthvalue(12)'.
+
+            This object SHOULD be set by the agent during entry
+            creation, and the value SHOULD NOT change during operation."
+    ::= { entPhySensorEntry 3 }
+
+entPhySensorValue OBJECT-TYPE
+    SYNTAX        EntitySensorValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The most recent measurement obtained by the agent for this
+            sensor.
+
+            To correctly interpret the value of this object, the
+            associated entPhySensorType, entPhySensorScale, and
+            entPhySensorPrecision objects must also be examined."
+    ::= { entPhySensorEntry 4 }
+
+entPhySensorOperStatus OBJECT-TYPE
+    SYNTAX        EntitySensorStatus
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The operational status of the sensor."
+    ::= { entPhySensorEntry 5 }
+
+entPhySensorUnitsDisplay OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual description of the data units that should be used
+            in the display of entPhySensorValue."
+    ::= { entPhySensorEntry 6 }
+
+entPhySensorValueTimeStamp OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The value of sysUpTime at the time the status and/or value
+            of this sensor was last obtained by the agent."
+    ::= { entPhySensorEntry 7 }
+
+entPhySensorValueUpdateRate  OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "milliseconds"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "An indication of the frequency that the agent updates the
+            associated entPhySensorValue object, representing in
+            milliseconds.
+
+            The value zero indicates:
+
+                - the sensor value is updated on demand (e.g.,
+                  when polled by the agent for a get-request),
+                - the sensor value is updated when the sensor
+                  value changes (event-driven),
+                - the agent does not know the update rate.
+            "
+    ::= { entPhySensorEntry 8 }
+
+--
+-- Conformance Section
+--
+
+entitySensorCompliances OBJECT IDENTIFIER
+    ::= { entitySensorConformance 1 }
+entitySensorGroups      OBJECT IDENTIFIER
+    ::= { entitySensorConformance 2 }
+
+entitySensorCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "Describes the requirements for conformance to the Entity
+            Sensor MIB module."
+    MODULE  -- this module
+        MANDATORY-GROUPS { entitySensorValueGroup }
+
+    MODULE ENTITY-MIB
+        MANDATORY-GROUPS { entityPhysicalGroup }
+    ::= { entitySensorCompliances 1 }
+
+-- Object Groups
+
+entitySensorValueGroup OBJECT-GROUP
+    OBJECTS {
+             entPhySensorType,
+             entPhySensorScale,
+             entPhySensorPrecision,
+             entPhySensorValue,
+             entPhySensorOperStatus,
+             entPhySensorUnitsDisplay,
+             entPhySensorValueTimeStamp,
+             entPhySensorValueUpdateRate
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects representing physical entity sensor
+            information."
+    ::= { entitySensorGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/ENTITY-STATE-MIB.mib b/snmp_builder/mibs/ENTITY-STATE-MIB.mib
new file mode 100644
index 0000000..6548b57
--- /dev/null
+++ b/snmp_builder/mibs/ENTITY-STATE-MIB.mib
@@ -0,0 +1,332 @@
+ENTITY-STATE-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2
+          FROM SNMPv2-SMI
+      DateAndTime
+          FROM SNMPv2-TC
+      MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+           FROM SNMPv2-CONF
+      entPhysicalIndex
+           FROM ENTITY-MIB
+      EntityAdminState, EntityOperState, EntityUsageState,
+      EntityAlarmStatus, EntityStandbyStatus
+           FROM ENTITY-STATE-TC-MIB;
+
+  entityStateMIB MODULE-IDENTITY
+      LAST-UPDATED "200511220000Z"
+      ORGANIZATION "IETF Entity MIB Working Group"
+
+      CONTACT-INFO
+              " General Discussion: entmib@ietf.org
+                To Subscribe:
+                http://www.ietf.org/mailman/listinfo/entmib
+
+                http://www.ietf.org/html.charters/entmib-charter.html
+
+                Sharon Chisholm
+                Nortel Networks
+                PO Box 3511 Station C
+                Ottawa, Ont.  K1Y 4H7
+                Canada
+                schishol@nortel.com
+
+                David T. Perkins
+                548 Qualbrook Ct
+                San Jose, CA 95110
+                USA
+                Phone: 408 394-8702
+                dperkins@snmpinfo.com
+               "
+      DESCRIPTION
+          "This MIB defines a state extension to the Entity MIB.
+
+           Copyright (C) The Internet Society 2005.  This version
+           of this MIB module is part of RFC 4268; see the RFC
+           itself for full legal notices."
+      REVISION    "200511220000Z"
+      DESCRIPTION
+          "Initial version, published as RFC 4268."
+      ::= { mib-2 131 }
+
+  -- Entity State Objects
+
+  entStateObjects OBJECT IDENTIFIER ::= { entityStateMIB 1 }
+
+  entStateTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF EntStateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "A table of information about state/status of entities.
+        This is a sparse augment of the entPhysicalTable.  Entries
+        appear in this table for values of
+        entPhysicalClass [RFC4133] that in this implementation
+        are able to report any of the state or status stored in
+        this table.
+        "
+   ::= { entStateObjects 1 }
+
+    entStateEntry OBJECT-TYPE
+       SYNTAX      EntStateEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "State information about this physical entity."
+       INDEX       { entPhysicalIndex }
+       ::= { entStateTable 1 }
+
+    EntStateEntry ::= SEQUENCE {
+        entStateLastChanged DateAndTime,
+        entStateAdmin       EntityAdminState,
+        entStateOper        EntityOperState,
+        entStateUsage       EntityUsageState,
+        entStateAlarm       EntityAlarmStatus,
+        entStateStandby     EntityStandbyStatus
+       }
+
+  entStateLastChanged OBJECT-TYPE
+   SYNTAX      DateAndTime
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The value of this object is the date and
+      time when the value of any of entStateAdmin,
+      entStateOper, entStateUsage, entStateAlarm,
+      or entStateStandby changed for this entity.
+
+      If there has been no change since
+      the last re-initialization of the local system,
+      this object contains the date and time of
+      local system initialization.  If there has been
+      no change since the entity was added to the
+      local system, this object contains the date and
+      time of the insertion."
+   ::= { entStateEntry 1 }
+
+entStateAdmin OBJECT-TYPE
+       SYNTAX      EntityAdminState
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+            "The administrative state for this entity.
+
+             This object refers to an entities administrative
+             permission to service both other entities within
+             its containment hierarchy as well other users of
+             its services defined by means outside the scope
+             of this MIB.
+
+             Setting this object to 'notSupported' will result
+             in an 'inconsistentValue' error.  For entities that
+             do not support administrative state, all set
+             operations will result in an 'inconsistentValue'
+             error.
+
+             Some physical entities exhibit only a subset of the
+             remaining administrative state values.  Some entities
+             cannot be locked, and hence this object exhibits only
+             the 'unlocked' state.  Other entities cannot be shutdown
+             gracefully, and hence this object does not exhibit the
+             'shuttingDown' state.  A value of 'inconsistentValue'
+             will be returned if attempts are made to set this
+             object to values not supported by its administrative
+             model."
+       ::= { entStateEntry 2 }
+
+ entStateOper OBJECT-TYPE
+       SYNTAX      EntityOperState
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The operational state for this entity.
+
+            Note that unlike the state model used within the
+            Interfaces MIB [RFC2863], this object does not follow
+            the administrative state.  An administrative state of
+            down does not predict an operational state
+            of disabled.
+
+            A value of 'testing' means that entity currently being
+            tested and cannot therefore report whether it is
+            operational or not.
+
+            A value of 'disabled' means that an entity is totally
+            inoperable and unable to provide service both to entities
+            within its containment hierarchy, or to other receivers
+            of its service as defined in ways outside the scope of
+            this MIB.
+
+            A value of 'enabled' means that an entity is fully or
+            partially operable and able to provide service both to
+
+            entities within its containment hierarchy, or to other
+            receivers of its service as defined in ways outside the
+            scope of this MIB.
+
+            Note that some implementations may not be able to
+            accurately report entStateOper while the
+            entStateAdmin object has a value other than 'unlocked'.
+            In these cases, this object MUST have a value
+            of 'unknown'."
+       ::= { entStateEntry 3 }
+
+ entStateUsage OBJECT-TYPE
+       SYNTAX      EntityUsageState
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The usage state for this entity.
+
+            This object refers to an entity's ability to service more
+            physical entities in a containment hierarchy.  A value
+            of 'idle' means this entity is able to contain other
+            entities but that no other entity is currently
+            contained within this entity.
+
+            A value of 'active' means that at least one entity is
+            contained within this entity, but that it could handle
+            more.  A value of 'busy' means that the entity is unable
+            to handle any additional entities being contained in it.
+
+            Some entities will exhibit only a subset of the
+            usage state values.  Entities that are unable to ever
+            service any entities within a containment hierarchy will
+            always have a usage state of 'busy'.  Some entities will
+            only ever be able to support one entity within its
+            containment hierarchy and will therefore only exhibit
+            values of 'idle' and 'busy'."
+          ::= { entStateEntry 4 }
+
+ entStateAlarm OBJECT-TYPE
+       SYNTAX      EntityAlarmStatus
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The alarm status for this entity.  It does not include
+            the alarms raised on child components within its
+            containment hierarchy.
+
+            A value of 'unknown' means that this entity is
+
+            unable to report alarm state.  Note that this differs
+            from 'indeterminate', which means that alarm state
+            is supported and there are alarms against this entity,
+            but the severity of some of the alarms is not known.
+
+            If no bits are set, then this entity supports reporting
+            of alarms, but there are currently no active alarms
+            against this entity."
+       ::= { entStateEntry 5 }
+
+entStateStandby OBJECT-TYPE
+       SYNTAX EntityStandbyStatus
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+            "The standby status for this entity.
+
+            Some entities will exhibit only a subset of the
+            remaining standby state values.  If this entity
+            cannot operate in a standby role, the value of this
+            object will always be 'providingService'."
+  ::= { entStateEntry 6 }
+
+-- Notifications
+ entStateNotifications OBJECT IDENTIFIER ::= { entityStateMIB 0 }
+
+entStateOperEnabled NOTIFICATION-TYPE
+   OBJECTS { entStateAdmin,
+             entStateAlarm
+           }
+   STATUS             current
+   DESCRIPTION
+           "An entStateOperEnabled notification signifies that the
+            SNMP entity, acting in an agent role, has detected that
+            the entStateOper object for one of its entities has
+            transitioned into the 'enabled' state.
+
+            The entity this notification refers can be identified by
+            extracting the entPhysicalIndex from one of the
+            variable bindings.  The entStateAdmin and entStateAlarm
+            varbinds may be examined to find out additional
+            information on the administrative state at the time of
+            the operation state change as well as to find out whether
+            there were any known alarms against the entity at that
+            time that may explain why the physical entity has become
+            operationally disabled."
+  ::= { entStateNotifications 1 }
+
+entStateOperDisabled NOTIFICATION-TYPE
+   OBJECTS { entStateAdmin,
+             entStateAlarm }
+   STATUS             current
+   DESCRIPTION
+           "An entStateOperDisabled notification signifies that the
+            SNMP entity, acting in an agent role, has detected that
+            the entStateOper object for one of its entities has
+            transitioned into the 'disabled' state.
+
+            The entity this notification refers can be identified by
+            extracting the entPhysicalIndex from one of the
+            variable bindings.  The entStateAdmin and entStateAlarm
+            varbinds may be examined to find out additional
+            information on the administrative state at the time of
+            the operation state change as well as to find out whether
+            there were any known alarms against the entity at that
+            time that may affect the physical entity's
+            ability to stay operationally enabled."
+  ::= { entStateNotifications 2 }
+
+-- Conformance and Compliance
+
+entStateConformance OBJECT IDENTIFIER ::= { entityStateMIB 2 }
+
+entStateCompliances OBJECT IDENTIFIER
+                  ::= { entStateConformance 1 }
+
+entStateCompliance MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+          "The compliance statement for systems supporting
+          the Entity State MIB."
+      MODULE -- this module
+          MANDATORY-GROUPS {
+           entStateGroup
+          }
+      GROUP       entStateNotificationsGroup
+         DESCRIPTION
+             "This group is optional."
+      OBJECT entStateAdmin
+       MIN-ACCESS  read-only
+       DESCRIPTION
+           "Write access is not required."
+   ::= { entStateCompliances 1 }
+
+entStateGroups OBJECT IDENTIFIER ::= { entStateConformance 2 }
+
+entStateGroup OBJECT-GROUP
+   OBJECTS {
+           entStateLastChanged,
+           entStateAdmin,
+           entStateOper,
+           entStateUsage,
+           entStateAlarm,
+           entStateStandby
+           }
+    STATUS   current
+    DESCRIPTION
+         "Standard Entity State group."
+    ::= { entStateGroups 1}
+
+entStateNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+           entStateOperEnabled,
+           entStateOperDisabled
+           }
+    STATUS   current
+    DESCRIPTION
+         "Standard Entity State Notification group."
+    ::= { entStateGroups 2}
+
+END
diff --git a/snmp_builder/mibs/ENTITY-STATE-TC-MIB.mib b/snmp_builder/mibs/ENTITY-STATE-TC-MIB.mib
new file mode 100644
index 0000000..7d10c7f
--- /dev/null
+++ b/snmp_builder/mibs/ENTITY-STATE-TC-MIB.mib
@@ -0,0 +1,169 @@
+ENTITY-STATE-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, mib-2       FROM SNMPv2-SMI
+   TEXTUAL-CONVENTION           FROM SNMPv2-TC;
+
+ entityStateTc MODULE-IDENTITY
+     LAST-UPDATED "200511220000Z"
+     ORGANIZATION "IETF Entity MIB Working Group"
+     CONTACT-INFO
+             "General Discussion: entmib@ietf.org
+              To Subscribe:
+              http://www.ietf.org/mailman/listinfo/entmib
+
+              http://www.ietf.org/html.charters/entmib-charter.html
+
+              Sharon Chisholm
+              Nortel Networks
+              PO Box 3511 Station C
+              Ottawa, Ont.  K1Y 4H7
+              Canada
+              schishol@nortel.com
+
+              David T. Perkins
+              548 Qualbrook Ct
+              San Jose, CA 95110
+              USA
+              Phone: 408 394-8702
+              dperkins@snmpinfo.com"
+      DESCRIPTION
+             "This MIB defines state textual conventions.
+
+              Copyright (C) The Internet Society 2005.  This version
+              of this MIB module is part of RFC 4268;  see the RFC
+              itself for full legal notices."
+      REVISION    "200511220000Z"
+      DESCRIPTION
+          "Initial version, published as RFC 4268."
+     ::= { mib-2 130 }
+
+  EntityAdminState  ::=  TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION
+         " Represents the various possible administrative states.
+
+           A value of 'locked' means the resource is administratively
+           prohibited from use.  A value of 'shuttingDown' means that
+           usage is administratively limited to current instances of
+           use.  A value of 'unlocked' means the resource is not
+           administratively prohibited from use.  A value of
+           'unknown' means that this resource is unable to
+           report administrative state."
+    SYNTAX         INTEGER
+              {
+              unknown (1),
+              locked (2),
+              shuttingDown (3),
+              unlocked (4)
+              }
+
+  EntityOperState  ::=  TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION
+         " Represents the possible values of operational states.
+
+           A value of 'disabled' means the resource is totally
+           inoperable.  A value of 'enabled' means the resource
+           is partially or fully operable.  A value of 'testing'
+           means the resource is currently being tested
+           and cannot therefore report whether it is operational
+           or not.  A value of 'unknown' means that this
+           resource is unable to report operational state."
+    SYNTAX         INTEGER
+              {
+              unknown (1),
+              disabled (2),
+              enabled (3),
+              testing (4)
+              }
+
+  EntityUsageState  ::=  TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION
+         " Represents the possible values of usage states.
+           A value of 'idle' means the resource is servicing no
+           users.  A value of 'active' means the resource is
+           currently in use and it has sufficient spare capacity
+           to provide for additional users.  A value of 'busy'
+           means the resource is currently in use, but it
+           currently has no spare capacity to provide for
+           additional users.  A value of 'unknown' means
+           that this resource is unable to report usage state."
+    SYNTAX         INTEGER
+
+              {
+              unknown (1),
+              idle (2),
+              active (3),
+              busy (4)
+              }
+
+ EntityAlarmStatus  ::=  TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION
+       " Represents the possible values of alarm status.
+         An Alarm [RFC3877] is a persistent indication
+         of an error or warning condition.
+
+         When no bits of this attribute are set, then no active
+         alarms are known against this entity and it is not under
+         repair.
+
+         When the 'value of underRepair' is set, the resource is
+         currently being repaired, which, depending on the
+         implementation, may make the other values in this bit
+         string not meaningful.
+
+         When the value of 'critical' is set, one or more critical
+         alarms are active against the resource.  When the value
+         of 'major' is set, one or more major alarms are active
+         against the resource.  When the value of 'minor' is set,
+         one or more minor alarms are active against the resource.
+         When the value of 'warning' is set, one or more warning
+         alarms are active against the resource.  When the value
+         of 'indeterminate' is set, one or more alarms of whose
+         perceived severity cannot be determined are active
+         against this resource.
+
+         A value of 'unknown' means that this resource is
+         unable to report alarm state."
+          SYNTAX         BITS
+             {
+             unknown (0),
+             underRepair (1),
+             critical(2),
+             major(3),
+             minor(4),
+             -- The following are not defined in X.733
+             warning (5),
+             indeterminate (6)
+                           }
+
+  EntityStandbyStatus  ::=  TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION
+         " Represents the possible values of standby status.
+
+           A value of 'hotStandby' means the resource is not
+           providing service, but it will be immediately able to
+           take over the role of the resource to be backed up,
+           without the need for initialization activity, and will
+           contain the same information as the resource to be
+           backed up.  A value of 'coldStandy' means that the
+           resource is to back up another resource, but will not
+           be immediately able to take over the role of a resource
+           to be backed up, and will require some initialization
+           activity.  A value of 'providingService' means the
+           resource is providing service.  A value of
+           'unknown' means that this resource is unable to
+           report standby state."
+          SYNTAX         INTEGER
+            {
+            unknown (1),
+            hotStandby (2),
+            coldStandby (3),
+            providingService (4)
+            }
+
+END
diff --git a/snmp_builder/mibs/ETHER-CHIPSET-MIB.mib b/snmp_builder/mibs/ETHER-CHIPSET-MIB.mib
new file mode 100644
index 0000000..52b4e09
--- /dev/null
+++ b/snmp_builder/mibs/ETHER-CHIPSET-MIB.mib
@@ -0,0 +1,532 @@
+ETHER-CHIPSET-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-IDENTITY, mib-2
+            FROM SNMPv2-SMI
+        dot3
+            FROM EtherLike-MIB;
+
+    etherChipsetMIB MODULE-IDENTITY
+        LAST-UPDATED "9908240400Z"  -- August 24, 199
+        ORGANIZATION "IETF 802.3 Hub MIB Working Group"
+        CONTACT-INFO
+            "WG E-mail: hubmib@hprnd.rose.hp.com
+          To subscribe: hubmib-request@hprnd.rose.hp.com
+
+                 Chair: Dan Romascanu
+                Postal: Lucent Technologies
+                        Atidum Technology Park, Bldg. 3
+                        Tel Aviv 61131
+                        Israel
+                   Tel: +972 3 645 8414
+                E-mail: dromasca@lucent.com
+
+               Editor: John Flick
+               Postal: Hewlett-Packard Company
+                       8000 Foothills Blvd. M/S 5556
+                       Roseville, CA 95747-5556
+                       USA
+
+                  Tel: +1 916 785 4018
+                  Fax: +1 916 785 3583
+               E-mail: johnf@rose.hp.com"
+        DESCRIPTION "This MIB module contains registered values for
+                    use by the dot3StatsEtherChipSet object in
+                    the EtherLike-MIB.  This object is used to
+                    identify the MAC hardware used to communicate
+                    on an interface.
+
+                    Note that the dot3StatsEtherChipSet object
+                    has been deprecated.  The primary purpose of
+                    this module is to capture historic assignments
+                    made by the various IETF working groups that
+                    have been responsible for maintaining the
+                    EtherLike-MIB.  Implementations which support
+                    the dot3StatsEtherChipSet object for backwards
+                    compatability may continue to use these values.
+                    For those chipsets not represented in this
+                    module, registration is required in other
+                    documentation, e.g., assignment within that
+                    part of the registration tree delegated to
+                    individual enterprises (see RFC 1155 and RFC
+                    1902)."
+
+        REVISION    "9908240400Z"  -- August 24, 1999
+        DESCRIPTION "Initial version of this module created by
+                    splitting the chipset registration information
+                    out from the EtherLike-MIB.
+                    Version published as RFC 2666."
+        ::= { mib-2 70 }
+
+    dot3ChipSets          OBJECT IDENTIFIER ::= { dot3 8 }
+
+    dot3ChipSetAMD        OBJECT IDENTIFIER ::= { dot3ChipSets 1 }
+
+    dot3ChipSetAMD7990 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am7990 Local Area Network
+                    Controller for Ethernet (LANCE)."
+        ::= { dot3ChipSetAMD 1 }
+
+    dot3ChipSetAMD79900 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79900 chip."
+        ::= { dot3ChipSetAMD 2 }
+
+    dot3ChipSetAMD79C940 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C940 Media Access Controller
+                    for Ethernet (MACE)."
+        ::= { dot3ChipSetAMD 3 }
+
+    dot3ChipSetAMD79C90 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C90 CMOS Local Area Network
+                    Controller for Ethernet (C-LANCE)."
+        ::= { dot3ChipSetAMD 4 }
+
+    dot3ChipSetAMD79C960 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C960 PCnet-ISA Single Chip
+                    Ethernet Controller for ISA."
+        ::= { dot3ChipSetAMD 5 }
+
+    dot3ChipSetAMD79C961 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C961 PCnet-ISA+ Single Chip
+                    Plug & Play Full-Duplex Ethernet Controller
+                    for ISA."
+        ::= { dot3ChipSetAMD 6 }
+
+    dot3ChipSetAMD79C961A OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C961A PCnet-ISA II Single Chip
+                    Plug & Play Full-Duplex Ethernet Controller
+                    for ISA."
+        ::= { dot3ChipSetAMD 7 }
+
+    dot3ChipSetAMD79C965 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C965 PCnet-32 Single Chip
+                    Ethernet Controller for PCI."
+        ::= { dot3ChipSetAMD 8 }
+
+    dot3ChipSetAMD79C970 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C970 PCnet PCI Single Chip
+
+                    Ethernet Controller for PCI Local Bus."
+        ::= { dot3ChipSetAMD 9 }
+
+    dot3ChipSetAMD79C970A OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices AM79C970A PCnet PCI II Single Chip
+                    Full-Duplex Ethernet Controller for PCI Local
+                    Bus."
+        ::= { dot3ChipSetAMD 10 }
+
+    dot3ChipSetAMD79C971 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C971 PCnet-FAST Single Chip
+                    Full-Duplex 10/100 Mbps Ethernet Controller for
+                    PCI Local Bus."
+        ::= { dot3ChipSetAMD 11 }
+
+    dot3ChipSetAMD79C972 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Advanced
+                    Micro Devices Am79C972 PCnet-FAST+ Enhanced
+                    10/100 Mbps PCI Ethernet Controller with OnNow
+                    Support."
+        ::= { dot3ChipSetAMD 12 }
+
+    dot3ChipSetIntel      OBJECT IDENTIFIER ::= { dot3ChipSets 2 }
+
+    dot3ChipSetIntel82586 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Intel
+                    82586 IEEE 802.3 Ethernet LAN Coprocessor."
+        ::= { dot3ChipSetIntel 1 }
+
+    dot3ChipSetIntel82596 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Intel
+                    82596 High-Performance 32-Bit Local Area Network
+                    Coprocessor."
+        ::= { dot3ChipSetIntel 2 }
+
+    dot3ChipSetIntel82595 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Intel
+                    82595 High Integration Ethernet Controller."
+        ::= { dot3ChipSetIntel 3 }
+
+    dot3ChipSetIntel82557 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Intel
+                    82557 Fast Ethernet PCI Bus Lan Controller."
+        ::= { dot3ChipSetIntel 4 }
+
+    dot3ChipSetIntel82558 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Intel
+                    82558 Fast Ethernet PCI Bus LAN Controller with
+                    Integrated PHY."
+        ::= { dot3ChipSetIntel 5 }
+
+    dot3ChipSetSeeq       OBJECT IDENTIFIER ::= { dot3ChipSets 3 }
+
+    dot3ChipSetSeeq8003 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    8003 chip set."
+        ::= { dot3ChipSetSeeq 1 }
+
+    dot3ChipSetSeeq80C03 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    80C03 Full-Duplex CMOS Ethernet Data Link
+                    Controller (MAC)."
+        ::= { dot3ChipSetSeeq 2 }
+
+    dot3ChipSetSeeq84C30 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    4-Port 84C30 Full-Duplex CMOS Ethernet 10
+                    MBit/Sec Data Link Controller (MAC)."
+        ::= { dot3ChipSetSeeq 3 }
+
+    dot3ChipSetSeeq8431 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    4-Port 8431 Full-Duplex CMOS Ethernet 10
+                    MBit/Sec Data Link Controller (MAC)."
+        ::= { dot3ChipSetSeeq 4 }
+
+    dot3ChipSetSeeq80C300 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    80C300 Full-Duplex CMOS Ethernet 10/100
+                    Mbit/Sec Data Link Controller (MAC)."
+        ::= { dot3ChipSetSeeq 5 }
+
+    dot3ChipSetSeeq84C300 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    4-Port 84C300 Fast Ethernet Controller (MAC)."
+        ::= { dot3ChipSetSeeq 6 }
+
+    dot3ChipSetSeeq84301 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    4-Port 84301 Fast Ethernet Controller (MAC)."
+        ::= { dot3ChipSetSeeq 7 }
+
+    dot3ChipSetSeeq84302 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    4-Port 84302 Fast Ethernet Controller (MAC)."
+        ::= { dot3ChipSetSeeq 8 }
+
+    dot3ChipSetSeeq8100 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the SEEQ
+                    8100 Gigabit Ethernet Controller (MAC & PCS)."
+        ::= { dot3ChipSetSeeq 9 }
+
+    dot3ChipSetNational   OBJECT IDENTIFIER ::= { dot3ChipSets 4 }
+
+    dot3ChipSetNational8390 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP8390 Network Interface
+                    Controller."
+        ::= { dot3ChipSetNational 1 }
+
+    dot3ChipSetNationalSonic OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83932 Systems-Oriented Network
+                    Interface Controller (SONIC)."
+        ::= { dot3ChipSetNational 2 }
+
+    dot3ChipSetNational83901 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83901 Serial Network Interface
+                    Controller (SNIC)."
+        ::= { dot3ChipSetNational 3 }
+
+    dot3ChipSetNational83902 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83902 Serial Network Interface
+                    Controller for Twisted Pair (ST-NIC)."
+        ::= { dot3ChipSetNational 4 }
+
+    dot3ChipSetNational83905 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83905 AT Local Area Network
+                    Twisted-Pair Interface (AT/LANTIC)."
+        ::= { dot3ChipSetNational 5 }
+
+    dot3ChipSetNational83907 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83907 AT Twisted-Pair Enhanced
+                    Coaxial Network Interface Controller
+                    (AT/LANTIC II)."
+        ::= { dot3ChipSetNational 6 }
+
+    dot3ChipSetNational83916 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83916 Systems-Oriented Network
+                    Interface Controller (SONIC-16)."
+        ::= { dot3ChipSetNational 7 }
+
+    dot3ChipSetNational83934 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83934 Systems-Oriented Network
+                    Interface Controller with Twisted Pair Interface
+                    (SONIC-T)."
+        ::= { dot3ChipSetNational 8 }
+
+    dot3ChipSetNational83936 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the National
+                    Semiconductor DP83936AVUL Full-Duplex Systems-
+                    Oriented Network Interface Controller with
+                    Twisted Pair Interface (SONIC-T)."
+        ::= { dot3ChipSetNational 9 }
+
+    dot3ChipSetFujitsu    OBJECT IDENTIFIER ::= { dot3ChipSets 5 }
+
+    dot3ChipSetFujitsu86950 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Fujitsu
+                    86950 chip."
+        ::= { dot3ChipSetFujitsu 1 }
+
+    dot3ChipSetFujitsu86960 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Fujitsu
+                    MB86960 Network Interface Controller with
+                    Encoder/Decoder (NICE)."
+        ::= { dot3ChipSetFujitsu 2 }
+
+    dot3ChipSetFujitsu86964 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Fujitsu
+                    MB86964 Ethernet Controller with 10BASE-T
+                    Tranceiver."
+        ::= { dot3ChipSetFujitsu 3 }
+
+    dot3ChipSetFujitsu86965A OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Fujitsu
+                    MB86965A EtherCoupler Single-Chip Ethernet
+                    Controller."
+        ::= { dot3ChipSetFujitsu 4 }
+
+    dot3ChipSetFujitsu86965B OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Fujitsu
+                    MB86965B EtherCoupler Single-Chip Ethernet
+                    Controller (supports full-duplex)."
+        ::= { dot3ChipSetFujitsu 5 }
+
+    dot3ChipSetDigital    OBJECT IDENTIFIER ::= { dot3ChipSets 6 }
+
+    dot3ChipSetDigitalDC21040 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor DC21040 chip."
+        ::= { dot3ChipSetDigital 1 }
+
+    dot3ChipSetDigital21041 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor 21041 PCI Ethernet LAN
+                    Controller."
+        ::= { dot3ChipSetDigital 2 }
+
+    dot3ChipSetDigital21140 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor 21140 PCI Fast Ethernet LAN
+                    Controller."
+        ::= { dot3ChipSetDigital 3 }
+
+    dot3ChipSetDigital21143 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor 21143 PCI/CardBus 10/100-Mb/s
+                    Ethernet LAN Controller."
+        ::= { dot3ChipSetDigital 4 }
+
+    dot3ChipSetDigital21340 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor 21340 10/100-MB/s managed buffered
+                    port switch."
+        ::= { dot3ChipSetDigital 5 }
+
+    dot3ChipSetDigital21440 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor 21440 Multiport 10/100Mbps
+                    Ethernet Controller."
+        ::= { dot3ChipSetDigital 6 }
+
+    dot3ChipSetDigital21540 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Digital
+                    Semiconductor 21540 PCI/CardBus Ethernet LAN
+                    Controller with Modem Interface."
+        ::= { dot3ChipSetDigital 7 }
+
+    dot3ChipSetTI         OBJECT IDENTIFIER ::= { dot3ChipSets 7 }
+
+    dot3ChipSetTIE100 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Texas
+                    Instruments TNETE100 ThunderLAN PCI Fast
+                    Ethernet Controller."
+        ::= { dot3ChipSetTI 1 }
+
+    dot3ChipSetTIE110 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Texas
+                    Instruments TNETE110 ThunderLAN PCI 10BASE-T
+                    Ethernet Adapter."
+        ::= { dot3ChipSetTI 2 }
+
+    dot3ChipSetTIX3100 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Texas
+                    Instruments TNETX3100 Desktop ThunderSWITCH
+                    8/2."
+        ::= { dot3ChipSetTI 3 }
+
+    dot3ChipSetTIX3150 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Texas
+                    Instruments TNETX3150 ThunderSWITCH 12/3."
+        ::= { dot3ChipSetTI 4 }
+
+    dot3ChipSetTIX3270 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Texas
+                    Instruments TNETX3270 ThunderSWITCH 24/3."
+        ::= { dot3ChipSetTI 5 }
+
+    dot3ChipSetToshiba    OBJECT IDENTIFIER ::= { dot3ChipSets 8 }
+
+    dot3ChipSetToshibaTC35815F OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Toshiba
+                    TC35815F PCI-Based 100/10Mbps Ethernet
+                    Controller."
+        ::= { dot3ChipSetToshiba 1 }
+
+    dot3ChipSetLucent     OBJECT IDENTIFIER ::= { dot3ChipSets 9 }
+
+    dot3ChipSetLucentATT1MX10 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Lucent
+                    Technologies ATT1MX10 (Spinnaker) Quad MAC and
+                    Tranceiver for Ethernet Frame Switching."
+           ::= { dot3ChipSetLucent 1 }
+
+    dot3ChipSetLucentLUC3M08 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Lucent
+                    Technologies LUC3M08 Eight Ethernet MACs for
+                    10/100 Mbits/s Frame Switching."
+        ::= { dot3ChipSetLucent 2 }
+
+    dot3ChipSetGalileo    OBJECT IDENTIFIER ::= { dot3ChipSets 10 }
+
+    dot3ChipSetGalileoGT48001 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Galileo
+                    Technology GT-48001A Switched Ethernet
+                    Controller."
+        ::= { dot3ChipSetGalileo 1 }
+
+    dot3ChipSetGalileoGT48002 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Galileo
+                    Technology GT-48002A Switched Fast Ethernet
+                    Controller."
+        ::= { dot3ChipSetGalileo 2 }
+
+    dot3ChipSetGalileoGT48004 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Galileo
+                    Technology GT-48004A Four Port Fast Ethernet
+                    Switch for Multiport 10/100BASE-X Systems."
+        ::= { dot3ChipSetGalileo 3 }
+
+    dot3ChipSetGalileoGT48207 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Galileo
+                    Technology GT-48207 Low-Cost 10 Port Switched
+                    Ethernet Controller for 10+10/100BASE-X."
+        ::= { dot3ChipSetGalileo 4 }
+
+    dot3ChipSetGalileoGT48208 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Galileo
+                    Technology GT-48208 Advanced 10 Port Switched
+                    Ethernet Controller for 10+10/100BASE-X."
+        ::= { dot3ChipSetGalileo 5 }
+
+    dot3ChipSetGalileoGT48212 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Galileo
+                    Technology GT-48212 Advanced 14 Port Switched
+                    Ethernet Controller for 10+10/100BASE-X."
+        ::= { dot3ChipSetGalileo 6 }
+
+    dot3ChipSetJato       OBJECT IDENTIFIER ::= { dot3ChipSets 11 }
+
+    dot3ChipSetJatoJT1001 OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the Jato
+                    Technologies JT1001 GigEMAC Server
+
+                    10/100/1000Mbps Ethernet Controller with PCI
+                    interface."
+        ::= { dot3ChipSetJato 1 }
+
+    dot3ChipSetXaQti      OBJECT IDENTIFIER ::= { dot3ChipSets 12 }
+
+    dot3ChipSetXaQtiXQ11800FP OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the XaQTI
+                    XQ11800FP XMAC II Gigabit Ethernet Media Access
+                    Controller."
+        ::= { dot3ChipSetXaQti 1 }
+
+    dot3ChipSetXaQtiXQ18110FP OBJECT-IDENTITY
+        STATUS      current
+        DESCRIPTION "The authoritative identifier for the XaQTI
+                    XQ18110FP GigaPower Protocol Accelerator."
+        ::= { dot3ChipSetXaQti 2 }
+
+END
diff --git a/snmp_builder/mibs/EtherLike-MIB.mib b/snmp_builder/mibs/EtherLike-MIB.mib
new file mode 100644
index 0000000..dcec7ce
--- /dev/null
+++ b/snmp_builder/mibs/EtherLike-MIB.mib
@@ -0,0 +1,1862 @@
+EtherLike-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+        Integer32, Counter32, Counter64, mib-2, transmission
+            FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP
+            FROM SNMPv2-CONF
+        TruthValue
+            FROM SNMPv2-TC
+        ifIndex, InterfaceIndex
+            FROM IF-MIB;
+
+    etherMIB MODULE-IDENTITY
+        LAST-UPDATED "200309190000Z"  -- September 19, 2003
+        ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
+                     Working Group"
+        CONTACT-INFO
+            "WG E-mail: hubmib@ietf.org
+          To subscribe: hubmib-request@ietf.org
+
+                 Chair: Dan Romascanu
+                Postal: Avaya Inc.
+                        Atidum Technology Park, Bldg. 3
+                        Tel Aviv 61131
+                        Israel
+                   Tel: +972 3 645 8414
+                E-mail: dromasca@avaya.com
+
+               Editor: John Flick
+               Postal: Hewlett-Packard Company
+                       8000 Foothills Blvd. M/S 5557
+                       Roseville, CA 95747-5557
+                       USA
+                  Tel: +1 916 785 4018
+                  Fax: +1 916 785 1199
+               E-mail: johnf@rose.hp.com"
+        DESCRIPTION "The MIB module to describe generic objects for
+                    ethernet-like network interfaces.
+
+                    The following reference is used throughout this
+                    MIB module:
+
+                    [IEEE 802.3 Std] refers to:
+                       IEEE Std 802.3, 2002 Edition: 'IEEE Standard
+
+                       for Information technology -
+                       Telecommunications and information exchange
+                       between systems - Local and metropolitan
+                       area networks - Specific requirements -
+                       Part 3: Carrier sense multiple access with
+                       collision detection (CSMA/CD) access method
+                       and physical layer specifications', as
+                       amended by IEEE Std 802.3ae-2002:
+                       'Amendment: Media Access Control (MAC)
+                       Parameters, Physical Layer, and Management
+                       Parameters for 10 Gb/s Operation', August,
+                       2002.
+
+                    Of particular interest is Clause 30, '10 Mb/s,
+                    100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'.
+
+                    Copyright (C) The Internet Society (2003).  This
+                    version of this MIB module is part of RFC 3635;
+                    see the RFC itself for full legal notices."
+
+        REVISION    "200309190000Z"  -- September 19, 2003
+        DESCRIPTION "Updated to include support for 10 Gb/sec
+                     interfaces.  This resulted in the following
+                     revisions:
+
+                     - Updated dot3StatsAlignmentErrors and
+                       dot3StatsSymbolErrors DESCRIPTIONs to
+                       reflect behaviour at 10 Gb/s
+                     - Added dot3StatsRateControlAbility and
+                       dot3RateControlStatus for management
+                       of the Rate Control function in 10 Gb/s
+                       WAN applications
+                     - Added 64-bit versions of all counters
+                       that are used on high-speed ethernet
+                       interfaces
+                     - Added object groups to contain the new
+                       objects
+                     - Deprecated etherStatsBaseGroup and
+                       split into etherStatsBaseGroup2 and
+                       etherStatsHalfDuplexGroup, so that
+                       interfaces which can only operate at
+                       full-duplex do not need to implement
+                       half-duplex-only statistics
+                     - Deprecated dot3Compliance and replaced
+                       it with dot3Compliance2, which includes
+                       the compliance information for the new
+                       object groups
+
+                     In addition, the dot3Tests and dot3Errors
+                     object identities have been deprecated,
+                     since there is no longer a standard method
+                     for using them.
+
+                     This version published as RFC 3635."
+
+        REVISION    "199908240400Z"  -- August 24, 1999
+        DESCRIPTION "Updated to include support for 1000 Mb/sec
+                     interfaces and full-duplex interfaces.
+                     This version published as RFC 2665."
+
+        REVISION    "199806032150Z"  -- June 3, 1998
+        DESCRIPTION "Updated to include support for 100 Mb/sec
+                     interfaces.
+                     This version published as RFC 2358."
+
+        REVISION    "199402030400Z"  -- February 3, 1994
+        DESCRIPTION "Initial version, published as RFC 1650."
+        ::= { mib-2 35 }
+
+    etherMIBObjects OBJECT IDENTIFIER ::= { etherMIB 1 }
+
+    dot3    OBJECT IDENTIFIER ::= { transmission 7 }
+
+    -- the Ethernet-like Statistics group
+
+    dot3StatsTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF Dot3StatsEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION "Statistics for a collection of ethernet-like
+                    interfaces attached to a particular system.
+                    There will be one row in this table for each
+                    ethernet-like interface in the system."
+        ::= { dot3 2 }
+
+    dot3StatsEntry OBJECT-TYPE
+        SYNTAX     Dot3StatsEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION "Statistics for a particular interface to an
+                    ethernet-like medium."
+        INDEX       { dot3StatsIndex }
+        ::= { dot3StatsTable 1 }
+
+    Dot3StatsEntry ::=
+        SEQUENCE {
+
+            dot3StatsIndex                      InterfaceIndex,
+            dot3StatsAlignmentErrors            Counter32,
+            dot3StatsFCSErrors                  Counter32,
+            dot3StatsSingleCollisionFrames      Counter32,
+            dot3StatsMultipleCollisionFrames    Counter32,
+            dot3StatsSQETestErrors              Counter32,
+            dot3StatsDeferredTransmissions      Counter32,
+            dot3StatsLateCollisions             Counter32,
+            dot3StatsExcessiveCollisions        Counter32,
+            dot3StatsInternalMacTransmitErrors  Counter32,
+            dot3StatsCarrierSenseErrors         Counter32,
+            dot3StatsFrameTooLongs              Counter32,
+            dot3StatsInternalMacReceiveErrors   Counter32,
+            dot3StatsEtherChipSet               OBJECT IDENTIFIER,
+            dot3StatsSymbolErrors               Counter32,
+            dot3StatsDuplexStatus               INTEGER,
+            dot3StatsRateControlAbility         TruthValue,
+            dot3StatsRateControlStatus          INTEGER
+        }
+
+    dot3StatsIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only  -- read-only since originally an
+                               -- SMIv1 index
+        STATUS      current
+        DESCRIPTION "An index value that uniquely identifies an
+                    interface to an ethernet-like medium.  The
+                    interface identified by a particular value of
+                    this index is the same interface as identified
+                    by the same value of ifIndex."
+        REFERENCE   "RFC 2863, ifIndex"
+        ::= { dot3StatsEntry 1 }
+
+    dot3StatsAlignmentErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames received on a particular
+                    interface that are not an integral number of
+                    octets in length and do not pass the FCS check.
+
+                    The count represented by an instance of this
+                    object is incremented when the alignmentError
+                    status is returned by the MAC service to the
+                    LLC (or other MAC user). Received frames for
+                    which multiple error conditions pertain are,
+                    according to the conventions of IEEE 802.3
+                    Layer Management, counted exclusively according
+
+                    to the error status presented to the LLC.
+
+                    This counter does not increment for group
+                    encoding schemes greater than 4 bits per group.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCStatsAlignmentErrors object for 10 Gb/s
+                    or faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.7,
+                    aAlignmentErrors"
+        ::= { dot3StatsEntry 2 }
+
+    dot3StatsFCSErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames received on a particular
+                    interface that are an integral number of octets
+                    in length but do not pass the FCS check.  This
+                    count does not include frames received with
+                    frame-too-long or frame-too-short error.
+
+                    The count represented by an instance of this
+                    object is incremented when the frameCheckError
+                    status is returned by the MAC service to the
+                    LLC (or other MAC user). Received frames for
+                    which multiple error conditions pertain are,
+                    according to the conventions of IEEE 802.3
+                    Layer Management, counted exclusively according
+                    to the error status presented to the LLC.
+
+                    Note:  Coding errors detected by the physical
+                    layer for speeds above 10 Mb/s will cause the
+                    frame to fail the FCS check.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCStatsFCSErrors object for 10 Gb/s or
+                    faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.6,
+                    aFrameCheckSequenceErrors."
+        ::= { dot3StatsEntry 3 }
+
+    dot3StatsSingleCollisionFrames OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames that are involved in a single
+                    collision, and are subsequently transmitted
+                    successfully.
+
+                    A frame that is counted by an instance of this
+                    object is also counted by the corresponding
+                    instance of either the ifOutUcastPkts,
+                    ifOutMulticastPkts, or ifOutBroadcastPkts,
+                    and is not counted by the corresponding
+                    instance of the dot3StatsMultipleCollisionFrames
+                    object.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.3,
+                    aSingleCollisionFrames."
+        ::= { dot3StatsEntry 4 }
+
+    dot3StatsMultipleCollisionFrames OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames that are involved in more
+
+                    than one collision and are subsequently
+                    transmitted successfully.
+
+                    A frame that is counted by an instance of this
+                    object is also counted by the corresponding
+                    instance of either the ifOutUcastPkts,
+                    ifOutMulticastPkts, or ifOutBroadcastPkts,
+                    and is not counted by the corresponding
+                    instance of the dot3StatsSingleCollisionFrames
+                    object.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.4,
+                    aMultipleCollisionFrames."
+        ::= { dot3StatsEntry 5 }
+
+    dot3StatsSQETestErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of times that the SQE TEST ERROR
+                    is received on a particular interface. The
+                    SQE TEST ERROR is set in accordance with the
+                    rules for verification of the SQE detection
+                    mechanism in the PLS Carrier Sense Function as
+                    described in IEEE Std. 802.3, 2000 Edition,
+                    section 7.2.4.6.
+
+                    This counter does not increment on interfaces
+                    operating at speeds greater than 10 Mb/s, or on
+                    interfaces operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 7.2.4.6, also 30.3.2.1.4,
+                    aSQETestErrors."
+        ::= { dot3StatsEntry 6 }
+
+    dot3StatsDeferredTransmissions OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames for which the first
+                    transmission attempt on a particular interface
+                    is delayed because the medium is busy.
+
+                    The count represented by an instance of this
+                    object does not include frames involved in
+                    collisions.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.9,
+                    aFramesWithDeferredXmissions."
+        ::= { dot3StatsEntry 7 }
+
+    dot3StatsLateCollisions OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The number of times that a collision is
+                    detected on a particular interface later than
+                    one slotTime into the transmission of a packet.
+
+                    A (late) collision included in a count
+                    represented by an instance of this object is
+                    also considered as a (generic) collision for
+                    purposes of other collision-related
+                    statistics.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.10,
+                    aLateCollisions."
+        ::= { dot3StatsEntry 8 }
+
+    dot3StatsExcessiveCollisions OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames for which transmission on a
+                    particular interface fails due to excessive
+                    collisions.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.11,
+                    aFramesAbortedDueToXSColls."
+        ::= { dot3StatsEntry 9 }
+
+    dot3StatsInternalMacTransmitErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames for which transmission on a
+                    particular interface fails due to an internal
+                    MAC sublayer transmit error. A frame is only
+                    counted by an instance of this object if it is
+                    not counted by the corresponding instance of
+                    either the dot3StatsLateCollisions object, the
+                    dot3StatsExcessiveCollisions object, or the
+                    dot3StatsCarrierSenseErrors object.
+
+                    The precise meaning of the count represented by
+                    an instance of this object is implementation-
+                    specific.  In particular, an instance of this
+                    object may represent a count of transmission
+                    errors on a particular interface that are not
+                    otherwise counted.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCStatsInternalMacTransmitErrors object for
+                    10 Gb/s or faster interfaces.
+
+                    Discontinuities in the value of this counter can
+
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.12,
+                    aFramesLostDueToIntMACXmitError."
+        ::= { dot3StatsEntry 10 }
+
+    dot3StatsCarrierSenseErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The number of times that the carrier sense
+                    condition was lost or never asserted when
+                    attempting to transmit a frame on a particular
+                    interface.
+
+                    The count represented by an instance of this
+                    object is incremented at most once per
+                    transmission attempt, even if the carrier sense
+                    condition fluctuates during a transmission
+                    attempt.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.13,
+                    aCarrierSenseErrors."
+        ::= { dot3StatsEntry 11 }
+
+    -- { dot3StatsEntry 12 } is not assigned
+
+    dot3StatsFrameTooLongs OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames received on a particular
+                    interface that exceed the maximum permitted
+                    frame size.
+
+                    The count represented by an instance of this
+                    object is incremented when the frameTooLong
+                    status is returned by the MAC service to the
+                    LLC (or other MAC user). Received frames for
+                    which multiple error conditions pertain are,
+                    according to the conventions of IEEE 802.3
+                    Layer Management, counted exclusively according
+                    to the error status presented to the LLC.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 80 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCStatsFrameTooLongs object for 10 Gb/s
+                    or faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.25,
+                    aFrameTooLongErrors."
+        ::= { dot3StatsEntry 13 }
+
+    -- { dot3StatsEntry 14 } is not assigned
+
+    -- { dot3StatsEntry 15 } is not assigned
+
+    dot3StatsInternalMacReceiveErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames for which reception on a
+                    particular interface fails due to an internal
+                    MAC sublayer receive error. A frame is only
+                    counted by an instance of this object if it is
+                    not counted by the corresponding instance of
+                    either the dot3StatsFrameTooLongs object, the
+                    dot3StatsAlignmentErrors object, or the
+                    dot3StatsFCSErrors object.
+
+                    The precise meaning of the count represented by
+                    an instance of this object is implementation-
+                    specific.  In particular, an instance of this
+                    object may represent a count of receive errors
+                    on a particular interface that are not
+                    otherwise counted.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCStatsInternalMacReceiveErrors object for
+                    10 Gb/s or faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.15,
+                    aFramesLostDueToIntMACRcvError."
+        ::= { dot3StatsEntry 16 }
+
+    dot3StatsEtherChipSet OBJECT-TYPE
+        SYNTAX      OBJECT IDENTIFIER
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+        DESCRIPTION "******** THIS OBJECT IS DEPRECATED ********
+
+                    This object contains an OBJECT IDENTIFIER
+                    which identifies the chipset used to
+                    realize the interface. Ethernet-like
+                    interfaces are typically built out of
+                    several different chips. The MIB implementor
+                    is presented with a decision of which chip
+                    to identify via this object. The implementor
+                    should identify the chip which is usually
+                    called the Medium Access Control chip.
+                    If no such chip is easily identifiable,
+                    the implementor should identify the chip
+                    which actually gathers the transmit
+                    and receive statistics and error
+                    indications. This would allow a
+                    manager station to correlate the
+                    statistics and the chip generating
+                    them, giving it the ability to take
+                    into account any known anomalies
+                    in the chip.
+
+                    This object has been deprecated.  Implementation
+                    feedback indicates that it is of limited use for
+                    debugging network problems in the field, and
+                    the administrative overhead involved in
+                    maintaining a registry of chipset OIDs is not
+                    justified."
+        ::= { dot3StatsEntry 17 }
+
+    dot3StatsSymbolErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "For an interface operating at 100 Mb/s, the
+                    number of times there was an invalid data symbol
+                    when a valid carrier was present.
+
+                    For an interface operating in half-duplex mode
+                    at 1000 Mb/s, the number of times the receiving
+                    media is non-idle (a carrier event) for a period
+                    of time equal to or greater than slotTime, and
+                    during which there was at least one occurrence
+                    of an event that causes the PHY to indicate
+                    'Data reception error' or 'carrier extend error'
+                    on the GMII.
+
+                    For an interface operating in full-duplex mode
+                    at 1000 Mb/s, the number of times the receiving
+                    media is non-idle (a carrier event) for a period
+                    of time equal to or greater than minFrameSize,
+                    and during which there was at least one
+                    occurrence of an event that causes the PHY to
+                    indicate 'Data reception error' on the GMII.
+
+                    For an interface operating at 10 Gb/s, the
+                    number of times the receiving media is non-idle
+                    (a carrier event) for a period of time equal to
+                    or greater than minFrameSize, and during which
+                    there was at least one occurrence of an event
+                    that causes the PHY to indicate 'Receive Error'
+                    on the XGMII.
+
+                    The count represented by an instance of this
+                    object is incremented at most once per carrier
+                    event, even if multiple symbol errors occur
+                    during the carrier event.  This count does
+                    not increment if a collision is present.
+
+                    This counter does not increment when the
+                    interface is operating at 10 Mb/s.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCStatsSymbolErrors object for 10 Gb/s
+                    or faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.2.1.5,
+                    aSymbolErrorDuringCarrier."
+        ::= { dot3StatsEntry 18 }
+
+    dot3StatsDuplexStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        unknown(1),
+                        halfDuplex(2),
+                        fullDuplex(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The current mode of operation of the MAC
+                    entity.  'unknown' indicates that the current
+                    duplex mode could not be determined.
+
+                    Management control of the duplex mode is
+                    accomplished through the MAU MIB.  When
+                    an interface does not support autonegotiation,
+                    or when autonegotiation is not enabled, the
+                    duplex mode is controlled using
+                    ifMauDefaultType.  When autonegotiation is
+                    supported and enabled, duplex mode is controlled
+                    using ifMauAutoNegAdvertisedBits.  In either
+                    case, the currently operating duplex mode is
+                    reflected both in this object and in ifMauType.
+
+                    Note that this object provides redundant
+                    information with ifMauType.  Normally, redundant
+                    objects are discouraged.  However, in this
+                    instance, it allows a management application to
+                    determine the duplex status of an interface
+                    without having to know every possible value of
+                    ifMauType.  This was felt to be sufficiently
+                    valuable to justify the redundancy."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.32,
+                    aDuplexStatus."
+        ::= { dot3StatsEntry 19 }
+
+    dot3StatsRateControlAbility OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "'true' for interfaces operating at speeds above
+                    1000 Mb/s that support Rate Control through
+                    lowering the average data rate of the MAC
+                    sublayer, with frame granularity, and 'false'
+                    otherwise."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.33,
+                    aRateControlAbility."
+        ::= { dot3StatsEntry 20 }
+
+    dot3StatsRateControlStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        rateControlOff(1),
+                        rateControlOn(2),
+                        unknown(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "The current Rate Control mode of operation of
+                    the MAC sublayer of this interface."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.34,
+                    aRateControlStatus."
+        ::= { dot3StatsEntry 21 }
+
+    -- the Ethernet-like Collision Statistics group
+
+    -- Implementation of this group is optional; it is appropriate
+    -- for all systems which have the necessary metering
+
+    dot3CollTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Dot3CollEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A collection of collision histograms for a
+                    particular set of interfaces."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.30,
+                    aCollisionFrames."
+        ::= { dot3 5 }
+
+    dot3CollEntry OBJECT-TYPE
+        SYNTAX      Dot3CollEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A cell in the histogram of per-frame
+                    collisions for a particular interface.  An
+
+                    instance of this object represents the
+                    frequency of individual MAC frames for which
+                    the transmission (successful or otherwise) on a
+                    particular interface is accompanied by a
+                    particular number of media collisions."
+        INDEX       { ifIndex, dot3CollCount }
+        ::= { dot3CollTable 1 }
+
+    Dot3CollEntry ::=
+        SEQUENCE {
+            dot3CollCount        Integer32,
+            dot3CollFrequencies  Counter32
+        }
+
+    -- { dot3CollEntry 1 } is no longer in use
+
+    dot3CollCount OBJECT-TYPE
+        SYNTAX      Integer32 (1..16)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "The number of per-frame media collisions for
+                    which a particular collision histogram cell
+                    represents the frequency on a particular
+                    interface."
+        ::= { dot3CollEntry 2 }
+
+    dot3CollFrequencies OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of individual MAC frames for which the
+                    transmission (successful or otherwise) on a
+                    particular interface occurs after the
+                    frame has experienced exactly the number
+                    of collisions in the associated
+                    dot3CollCount object.
+
+                    For example, a frame which is transmitted
+                    on interface 77 after experiencing
+                    exactly 4 collisions would be indicated
+                    by incrementing only dot3CollFrequencies.77.4.
+                    No other instance of dot3CollFrequencies would
+                    be incremented in this example.
+
+                    This counter does not increment when the
+                    interface is operating in full-duplex mode.
+
+                    Discontinuities in the value of this counter can
+
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        ::= { dot3CollEntry 3 }
+
+    dot3ControlTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Dot3ControlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table of descriptive and status information
+                    about the MAC Control sublayer on the
+                    ethernet-like interfaces attached to a
+                    particular system.  There will be one row in
+                    this table for each ethernet-like interface in
+                    the system which implements the MAC Control
+                    sublayer.  If some, but not all, of the
+                    ethernet-like interfaces in the system implement
+                    the MAC Control sublayer, there will be fewer
+                    rows in this table than in the dot3StatsTable."
+        ::= { dot3 9 }
+
+    dot3ControlEntry OBJECT-TYPE
+        SYNTAX      Dot3ControlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "An entry in the table, containing information
+                    about the MAC Control sublayer on a single
+                    ethernet-like interface."
+        INDEX       { dot3StatsIndex }
+        ::= { dot3ControlTable 1 }
+
+    Dot3ControlEntry ::=
+        SEQUENCE {
+            dot3ControlFunctionsSupported       BITS,
+            dot3ControlInUnknownOpcodes         Counter32,
+            dot3HCControlInUnknownOpcodes       Counter64
+        }
+
+    dot3ControlFunctionsSupported OBJECT-TYPE
+        SYNTAX      BITS {
+                        pause(0)   -- 802.3 flow control
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A list of the possible MAC Control functions
+                    implemented for this interface."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.3.2,
+                    aMACControlFunctionsSupported."
+        ::= { dot3ControlEntry 1 }
+
+    dot3ControlInUnknownOpcodes OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of MAC Control frames received on this
+                    interface that contain an opcode that is not
+                    supported by this device.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCControlInUnknownOpcodes object for 10 Gb/s
+                    or faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.3.5,
+                    aUnsupportedOpcodesReceived"
+        ::= { dot3ControlEntry 2 }
+
+    dot3HCControlInUnknownOpcodes OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of MAC Control frames received on this
+                    interface that contain an opcode that is not
+                    supported by this device.
+
+                    This counter is a 64 bit version of
+                    dot3ControlInUnknownOpcodes.  It should be used
+                    on interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.3.5,
+                    aUnsupportedOpcodesReceived"
+        ::= { dot3ControlEntry 3 }
+
+    dot3PauseTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Dot3PauseEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table of descriptive and status information
+                    about the MAC Control PAUSE function on the
+                    ethernet-like interfaces attached to a
+                    particular system. There will be one row in
+                    this table for each ethernet-like interface in
+                    the system which supports the MAC Control PAUSE
+                    function (i.e., the 'pause' bit in the
+                    corresponding instance of
+                    dot3ControlFunctionsSupported is set).  If some,
+                    but not all, of the ethernet-like interfaces in
+                    the system implement the MAC Control PAUSE
+                    function (for example, if some interfaces only
+                    support half-duplex), there will be fewer rows
+                    in this table than in the dot3StatsTable."
+        ::= { dot3 10 }
+
+    dot3PauseEntry OBJECT-TYPE
+        SYNTAX      Dot3PauseEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "An entry in the table, containing information
+                    about the MAC Control PAUSE function on a single
+                    ethernet-like interface."
+        INDEX       { dot3StatsIndex }
+        ::= { dot3PauseTable 1 }
+
+    Dot3PauseEntry ::=
+
+        SEQUENCE {
+            dot3PauseAdminMode                  INTEGER,
+            dot3PauseOperMode                   INTEGER,
+            dot3InPauseFrames                   Counter32,
+            dot3OutPauseFrames                  Counter32,
+            dot3HCInPauseFrames                 Counter64,
+            dot3HCOutPauseFrames                Counter64
+        }
+
+    dot3PauseAdminMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        disabled(1),
+                        enabledXmit(2),
+                        enabledRcv(3),
+                        enabledXmitAndRcv(4)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION "This object is used to configure the default
+                    administrative PAUSE mode for this interface.
+
+                    This object represents the
+                    administratively-configured PAUSE mode for this
+                    interface.  If auto-negotiation is not enabled
+                    or is not implemented for the active MAU
+                    attached to this interface, the value of this
+                    object determines the operational PAUSE mode
+                    of the interface whenever it is operating in
+                    full-duplex mode.  In this case, a set to this
+                    object will force the interface into the
+                    specified mode.
+
+                    If auto-negotiation is implemented and enabled
+                    for the MAU attached to this interface, the
+                    PAUSE mode for this interface is determined by
+                    auto-negotiation, and the value of this object
+                    denotes the mode to which the interface will
+                    automatically revert if/when auto-negotiation is
+                    later disabled.  Note that when auto-negotiation
+                    is running, administrative control of the PAUSE
+                    mode may be accomplished using the
+                    ifMauAutoNegCapAdvertisedBits object in the
+                    MAU-MIB.
+
+                    Note that the value of this object is ignored
+                    when the interface is not operating in
+                    full-duplex mode.
+
+                    An attempt to set this object to
+                    'enabledXmit(2)' or 'enabledRcv(3)' will fail
+                    on interfaces that do not support operation
+                    at greater than 100 Mb/s."
+        ::= { dot3PauseEntry 1 }
+
+    dot3PauseOperMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        disabled(1),
+                        enabledXmit(2),
+                        enabledRcv(3),
+                        enabledXmitAndRcv(4)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "This object reflects the PAUSE mode currently
+
+                    in use on this interface, as determined by
+                    either (1) the result of the auto-negotiation
+                    function or (2) if auto-negotiation is not
+                    enabled or is not implemented for the active MAU
+                    attached to this interface, by the value of
+                    dot3PauseAdminMode.  Interfaces operating at
+                    100 Mb/s or less will never return
+                    'enabledXmit(2)' or 'enabledRcv(3)'.  Interfaces
+                    operating in half-duplex mode will always return
+                    'disabled(1)'.  Interfaces on which
+                    auto-negotiation is enabled but not yet
+                    completed should return the value
+                    'disabled(1)'."
+        ::= { dot3PauseEntry 2 }
+
+    dot3InPauseFrames OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of MAC Control frames received on this
+                    interface with an opcode indicating the PAUSE
+                    operation.
+
+                    This counter does not increment when the
+                    interface is operating in half-duplex mode.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCInPauseFrames object for 10 Gb/s or
+                    faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.4.3,
+                    aPAUSEMACCtrlFramesReceived."
+        ::= { dot3PauseEntry 3 }
+
+    dot3OutPauseFrames OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of MAC Control frames transmitted on
+                    this interface with an opcode indicating the
+                    PAUSE operation.
+
+                    This counter does not increment when the
+                    interface is operating in half-duplex mode.
+
+                    For interfaces operating at 10 Gb/s, this
+                    counter can roll over in less than 5 minutes if
+                    it is incrementing at its maximum rate.  Since
+                    that amount of time could be less than a
+                    management station's poll cycle time, in order
+                    to avoid a loss of information, a management
+                    station is advised to poll the
+                    dot3HCOutPauseFrames object for 10 Gb/s or
+                    faster interfaces.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.4.2,
+                    aPAUSEMACCtrlFramesTransmitted."
+        ::= { dot3PauseEntry 4 }
+
+    dot3HCInPauseFrames OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of MAC Control frames received on this
+                    interface with an opcode indicating the PAUSE
+                    operation.
+
+                    This counter does not increment when the
+                    interface is operating in half-duplex mode.
+
+                    This counter is a 64 bit version of
+                    dot3InPauseFrames.  It should be used on
+                    interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.4.3,
+                    aPAUSEMACCtrlFramesReceived."
+        ::= { dot3PauseEntry 5 }
+
+    dot3HCOutPauseFrames OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of MAC Control frames transmitted on
+                    this interface with an opcode indicating the
+                    PAUSE operation.
+
+                    This counter does not increment when the
+                    interface is operating in half-duplex mode.
+
+                    This counter is a 64 bit version of
+                    dot3OutPauseFrames.  It should be used on
+                    interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.4.2,
+                    aPAUSEMACCtrlFramesTransmitted."
+        ::= { dot3PauseEntry 6 }
+
+    dot3HCStatsTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Dot3HCStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "A table containing 64-bit versions of error
+                    counters from the dot3StatsTable.  The 32-bit
+                    versions of these counters may roll over quite
+                    quickly on higher speed ethernet interfaces.
+                    The counters that have 64-bit versions in this
+                    table are the counters that apply to full-duplex
+                    interfaces, since 10 Gb/s and faster
+                    ethernet-like interfaces do not support
+                    half-duplex, and very few 1000 Mb/s
+                    ethernet-like interfaces support half-duplex.
+
+                    Entries in this table are recommended for
+                    interfaces capable of operating at 1000 Mb/s or
+                    faster, and are required for interfaces capable
+                    of operating at 10 Gb/s or faster.  Lower speed
+                    ethernet-like interfaces do not need entries in
+                    this table, in which case there may be fewer
+                    entries in this table than in the
+                    dot3StatsTable. However, implementations
+                    containing interfaces with a mix of speeds may
+                    choose to implement entries in this table for
+
+                    all ethernet-like interfaces."
+        ::= { dot3 11 }
+
+    dot3HCStatsEntry OBJECT-TYPE
+        SYNTAX      Dot3HCStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION "An entry containing 64-bit statistics for a
+                    single ethernet-like interface."
+        INDEX       { dot3StatsIndex }
+        ::= { dot3HCStatsTable 1 }
+
+    Dot3HCStatsEntry ::=
+        SEQUENCE {
+            dot3HCStatsAlignmentErrors           Counter64,
+            dot3HCStatsFCSErrors                 Counter64,
+            dot3HCStatsInternalMacTransmitErrors Counter64,
+            dot3HCStatsFrameTooLongs             Counter64,
+            dot3HCStatsInternalMacReceiveErrors  Counter64,
+            dot3HCStatsSymbolErrors              Counter64
+        }
+
+    dot3HCStatsAlignmentErrors OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames received on a particular
+                    interface that are not an integral number of
+                    octets in length and do not pass the FCS check.
+
+                    The count represented by an instance of this
+                    object is incremented when the alignmentError
+                    status is returned by the MAC service to the
+                    LLC (or other MAC user). Received frames for
+                    which multiple error conditions pertain are,
+                    according to the conventions of IEEE 802.3
+                    Layer Management, counted exclusively according
+                    to the error status presented to the LLC.
+
+                    This counter does not increment for group
+                    encoding schemes greater than 4 bits per group.
+
+                    This counter is a 64 bit version of
+                    dot3StatsAlignmentErrors.  It should be used
+                    on interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.7,
+                    aAlignmentErrors"
+        ::= { dot3HCStatsEntry 1 }
+
+    dot3HCStatsFCSErrors OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames received on a particular
+                    interface that are an integral number of octets
+                    in length but do not pass the FCS check.  This
+                    count does not include frames received with
+                    frame-too-long or frame-too-short error.
+
+                    The count represented by an instance of this
+                    object is incremented when the frameCheckError
+                    status is returned by the MAC service to the
+                    LLC (or other MAC user). Received frames for
+                    which multiple error conditions pertain are,
+                    according to the conventions of IEEE 802.3
+                    Layer Management, counted exclusively according
+                    to the error status presented to the LLC.
+
+                    Note:  Coding errors detected by the physical
+                    layer for speeds above 10 Mb/s will cause the
+                    frame to fail the FCS check.
+
+                    This counter is a 64 bit version of
+                    dot3StatsFCSErrors.  It should be used on
+                    interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.6,
+                    aFrameCheckSequenceErrors."
+        ::= { dot3HCStatsEntry 2 }
+
+    dot3HCStatsInternalMacTransmitErrors OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames for which transmission on a
+                    particular interface fails due to an internal
+                    MAC sublayer transmit error. A frame is only
+
+                    counted by an instance of this object if it is
+                    not counted by the corresponding instance of
+                    either the dot3StatsLateCollisions object, the
+                    dot3StatsExcessiveCollisions object, or the
+                    dot3StatsCarrierSenseErrors object.
+
+                    The precise meaning of the count represented by
+                    an instance of this object is implementation-
+                    specific.  In particular, an instance of this
+                    object may represent a count of transmission
+                    errors on a particular interface that are not
+                    otherwise counted.
+
+                    This counter is a 64 bit version of
+                    dot3StatsInternalMacTransmitErrors.  It should
+                    be used on interfaces operating at 10 Gb/s or
+                    faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.12,
+                    aFramesLostDueToIntMACXmitError."
+        ::= { dot3HCStatsEntry 3 }
+
+    dot3HCStatsFrameTooLongs OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames received on a particular
+                    interface that exceed the maximum permitted
+                    frame size.
+
+                    The count represented by an instance of this
+                    object is incremented when the frameTooLong
+                    status is returned by the MAC service to the
+                    LLC (or other MAC user). Received frames for
+                    which multiple error conditions pertain are,
+                    according to the conventions of IEEE 802.3
+                    Layer Management, counted exclusively according
+                    to the error status presented to the LLC.
+
+                    This counter is a 64 bit version of
+                    dot3StatsFrameTooLongs.  It should be used on
+                    interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.25,
+                    aFrameTooLongErrors."
+        ::= { dot3HCStatsEntry 4 }
+
+    dot3HCStatsInternalMacReceiveErrors OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "A count of frames for which reception on a
+                    particular interface fails due to an internal
+                    MAC sublayer receive error. A frame is only
+                    counted by an instance of this object if it is
+                    not counted by the corresponding instance of
+                    either the dot3StatsFrameTooLongs object, the
+                    dot3StatsAlignmentErrors object, or the
+                    dot3StatsFCSErrors object.
+
+                    The precise meaning of the count represented by
+                    an instance of this object is implementation-
+                    specific.  In particular, an instance of this
+                    object may represent a count of receive errors
+                    on a particular interface that are not
+                    otherwise counted.
+
+                    This counter is a 64 bit version of
+                    dot3StatsInternalMacReceiveErrors.  It should be
+                    used on interfaces operating at 10 Gb/s or
+                    faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.1.1.15,
+                    aFramesLostDueToIntMACRcvError."
+        ::= { dot3HCStatsEntry 5 }
+
+    dot3HCStatsSymbolErrors OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION "For an interface operating at 100 Mb/s, the
+                    number of times there was an invalid data symbol
+                    when a valid carrier was present.
+
+                    For an interface operating in half-duplex mode
+                    at 1000 Mb/s, the number of times the receiving
+                    media is non-idle (a carrier event) for a period
+                    of time equal to or greater than slotTime, and
+                    during which there was at least one occurrence
+                    of an event that causes the PHY to indicate
+                    'Data reception error' or 'carrier extend error'
+                    on the GMII.
+
+                    For an interface operating in full-duplex mode
+                    at 1000 Mb/s, the number of times the receiving
+                    media is non-idle (a carrier event) for a period
+                    of time equal to or greater than minFrameSize,
+                    and during which there was at least one
+                    occurrence of an event that causes the PHY to
+                    indicate 'Data reception error' on the GMII.
+
+                    For an interface operating at 10 Gb/s, the
+                    number of times the receiving media is non-idle
+                    (a carrier event) for a period of time equal to
+                    or greater than minFrameSize, and during which
+                    there was at least one occurrence of an event
+                    that causes the PHY to indicate 'Receive Error'
+                    on the XGMII.
+
+                    The count represented by an instance of this
+                    object is incremented at most once per carrier
+                    event, even if multiple symbol errors occur
+                    during the carrier event.  This count does
+                    not increment if a collision is present.
+
+                    This counter is a 64 bit version of
+                    dot3StatsSymbolErrors.  It should be used on
+                    interfaces operating at 10 Gb/s or faster.
+
+                    Discontinuities in the value of this counter can
+                    occur at re-initialization of the management
+                    system, and at other times as indicated by the
+                    value of ifCounterDiscontinuityTime."
+        REFERENCE   "[IEEE 802.3 Std.], 30.3.2.1.5,
+                    aSymbolErrorDuringCarrier."
+        ::= { dot3HCStatsEntry 6 }
+
+    --  802.3 Tests
+
+    dot3Tests   OBJECT IDENTIFIER ::= { dot3 6 }
+
+    dot3Errors  OBJECT IDENTIFIER ::= { dot3 7 }
+
+    --  TDR Test
+
+    dot3TestTdr OBJECT-IDENTITY
+        STATUS      deprecated
+        DESCRIPTION "******** THIS IDENTITY IS DEPRECATED *******
+
+                    The Time-Domain Reflectometry (TDR) test is
+                    specific to ethernet-like interfaces of type
+                    10Base5 and 10Base2.  The TDR value may be
+                    useful in determining the approximate distance
+                    to a cable fault.  It is advisable to repeat
+                    this test to check for a consistent resulting
+                    TDR value, to verify that there is a fault.
+
+                    A TDR test returns as its result the time
+                    interval, measured in 10 MHz ticks or 100 nsec
+                    units, between the start of TDR test
+                    transmission and the subsequent detection of a
+                    collision or deassertion of carrier.  On
+                    successful completion of a TDR test, the result
+                    is stored as the value of an appropriate
+                    instance of an appropriate vendor specific MIB
+                    object, and the OBJECT IDENTIFIER of that
+                    instance is stored in the appropriate instance
+                    of the appropriate test result code object
+                    (thereby indicating where the result has been
+                    stored).
+
+                    This object identity has been deprecated, since
+                    the ifTestTable in the IF-MIB was deprecated,
+                    and there is no longer a standard mechanism for
+                    initiating an interface test.  This left no
+                    standard way of using this object identity."
+        ::= { dot3Tests 1 }
+
+    -- Loopback Test
+
+    dot3TestLoopBack OBJECT-IDENTITY
+        STATUS      deprecated
+        DESCRIPTION "******** THIS IDENTITY IS DEPRECATED *******
+
+                    This test configures the MAC chip and executes
+                    an internal loopback test of memory, data paths,
+                    and the MAC chip logic.  This loopback test can
+                    only be executed if the interface is offline.
+                    Once the test has completed, the MAC chip should
+
+                    be reinitialized for network operation, but it
+                    should remain offline.
+
+                    If an error occurs during a test, the
+                    appropriate test result object will be set
+                    to indicate a failure.  The two OBJECT
+                    IDENTIFIER values dot3ErrorInitError and
+                    dot3ErrorLoopbackError may be used to provided
+                    more information as values for an appropriate
+                    test result code object.
+
+                    This object identity has been deprecated, since
+                    the ifTestTable in the IF-MIB was deprecated,
+                    and there is no longer a standard mechanism for
+                    initiating an interface test.  This left no
+                    standard way of using this object identity."
+        ::= { dot3Tests 2 }
+
+    dot3ErrorInitError OBJECT-IDENTITY
+        STATUS      deprecated
+        DESCRIPTION "******** THIS IDENTITY IS DEPRECATED *******
+
+                    Couldn't initialize MAC chip for test.
+
+                    This object identity has been deprecated, since
+                    the ifTestTable in the IF-MIB was deprecated,
+                    and there is no longer a standard mechanism for
+                    initiating an interface test.  This left no
+                    standard way of using this object identity."
+        ::= { dot3Errors 1 }
+
+    dot3ErrorLoopbackError OBJECT-IDENTITY
+        STATUS      deprecated
+        DESCRIPTION "******** THIS IDENTITY IS DEPRECATED *******
+
+                    Expected data not received (or not received
+                    correctly) in loopback test.
+
+                    This object identity has been deprecated, since
+                    the ifTestTable in the IF-MIB was deprecated,
+                    and there is no longer a standard mechanism for
+                    initiating an interface test.  This left no
+                    standard way of using this object identity."
+        ::= { dot3Errors 2 }
+
+    -- { dot3 8 }, the dot3ChipSets tree, is defined in [RFC2666]
+
+    -- conformance information
+
+    etherConformance OBJECT IDENTIFIER ::= { etherMIB 2 }
+
+    etherGroups      OBJECT IDENTIFIER ::= { etherConformance 1 }
+    etherCompliances OBJECT IDENTIFIER ::= { etherConformance 2 }
+
+    -- compliance statements
+
+    etherCompliance MODULE-COMPLIANCE
+        STATUS      deprecated
+        DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+                    The compliance statement for managed network
+                    entities which have ethernet-like network
+                    interfaces.
+
+                    This compliance is deprecated and replaced by
+                    dot3Compliance."
+
+        MODULE  -- this module
+            MANDATORY-GROUPS { etherStatsGroup }
+
+            GROUP       etherCollisionTableGroup
+            DESCRIPTION "This group is optional. It is appropriate
+                        for all systems which have the necessary
+                        metering. Implementation in such systems is
+                        highly recommended."
+        ::= { etherCompliances 1 }
+
+    ether100MbsCompliance MODULE-COMPLIANCE
+        STATUS      deprecated
+        DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+                    The compliance statement for managed network
+                    entities which have 100 Mb/sec ethernet-like
+                    network interfaces.
+
+                    This compliance is deprecated and replaced by
+                    dot3Compliance."
+
+        MODULE  -- this module
+            MANDATORY-GROUPS { etherStats100MbsGroup }
+
+            GROUP       etherCollisionTableGroup
+            DESCRIPTION "This group is optional. It is appropriate
+                        for all systems which have the necessary
+                        metering. Implementation in such systems is
+                        highly recommended."
+        ::= { etherCompliances 2 }
+
+    dot3Compliance MODULE-COMPLIANCE
+        STATUS      deprecated
+        DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+                    The compliance statement for managed network
+                    entities which have ethernet-like network
+                    interfaces.
+
+                    This compliance is deprecated and replaced by
+                    dot3Compliance2."
+
+        MODULE  -- this module
+            MANDATORY-GROUPS { etherStatsBaseGroup }
+
+            GROUP       etherDuplexGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating in full-duplex mode.
+                        It is highly recommended for all
+                        ethernet-like network interfaces."
+
+            GROUP       etherStatsLowSpeedGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating at 10 Mb/s or slower in
+                        half-duplex mode."
+
+            GROUP       etherStatsHighSpeedGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating at 100 Mb/s or faster."
+
+            GROUP       etherControlGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces that
+                        support the MAC Control sublayer."
+
+            GROUP       etherControlPauseGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces that
+                        support the MAC Control PAUSE function."
+
+            GROUP       etherCollisionTableGroup
+            DESCRIPTION "This group is optional. It is appropriate
+                        for all ethernet-like network interfaces
+                        which are capable of operating in
+                        half-duplex mode and have the necessary
+                        metering. Implementation in systems with
+
+                        such interfaces is highly recommended."
+        ::= { etherCompliances 3 }
+
+        dot3Compliance2 MODULE-COMPLIANCE
+            STATUS      current
+            DESCRIPTION "The compliance statement for managed network
+                        entities which have ethernet-like network
+                        interfaces.
+
+                        Note that compliance with this MIB module
+                        requires compliance with the ifCompliance3
+                        MODULE-COMPLIANCE statement of the IF-MIB
+                        (RFC2863).  In addition, compliance with this
+                        MIB module requires compliance  with the
+                        mauModIfCompl3 MODULE-COMPLIANCE statement of
+                        the MAU-MIB (RFC3636)."
+
+        MODULE  -- this module
+            MANDATORY-GROUPS { etherStatsBaseGroup2 }
+
+            GROUP       etherDuplexGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating in full-duplex mode.
+                        It is highly recommended for all
+                        ethernet-like network interfaces."
+
+            GROUP       etherRateControlGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating at speeds faster than
+                        1000 Mb/s. It is highly recommended for all
+                        ethernet-like network interfaces."
+
+            GROUP       etherStatsLowSpeedGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating at 10 Mb/s or slower in
+                        half-duplex mode."
+
+            GROUP       etherStatsHighSpeedGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating at 100 Mb/s or faster."
+
+            GROUP       etherStatsHalfDuplexGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+
+                        capable of operating in half-duplex mode."
+
+            GROUP       etherHCStatsGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces which are
+                        capable of operating at 10 Gb/s or faster.
+                        It is recommended for all ethernet-like
+                        network interfaces which are capable of
+                        operating at 1000 Mb/s or faster."
+
+            GROUP       etherControlGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces that
+                        support the MAC Control sublayer."
+
+            GROUP       etherHCControlGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces that
+                        support the MAC Control sublayer and are
+                        capable of operating at 10 Gb/s or faster."
+
+            GROUP       etherControlPauseGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces that
+                        support the MAC Control PAUSE function."
+
+            GROUP       etherHCControlPauseGroup
+            DESCRIPTION "This group is mandatory for all
+                        ethernet-like network interfaces that
+                        support the MAC Control PAUSE function and
+                        are capable of operating at 10 Gb/s or
+                        faster."
+
+            GROUP       etherCollisionTableGroup
+            DESCRIPTION "This group is optional. It is appropriate
+                        for all ethernet-like network interfaces
+                        which are capable of operating in
+                        half-duplex mode and have the necessary
+                        metering. Implementation in systems with
+                        such interfaces is highly recommended."
+        ::= { etherCompliances 4 }
+
+    -- units of conformance
+
+    etherStatsGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsIndex,
+                      dot3StatsAlignmentErrors,
+                      dot3StatsFCSErrors,
+                      dot3StatsSingleCollisionFrames,
+                      dot3StatsMultipleCollisionFrames,
+                      dot3StatsSQETestErrors,
+                      dot3StatsDeferredTransmissions,
+                      dot3StatsLateCollisions,
+                      dot3StatsExcessiveCollisions,
+                      dot3StatsInternalMacTransmitErrors,
+                      dot3StatsCarrierSenseErrors,
+                      dot3StatsFrameTooLongs,
+                      dot3StatsInternalMacReceiveErrors,
+                      dot3StatsEtherChipSet
+                    }
+        STATUS      deprecated
+        DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+                    A collection of objects providing information
+                    applicable to all ethernet-like network
+                    interfaces.
+
+                    This object group has been deprecated and
+                    replaced by etherStatsBaseGroup and
+                    etherStatsLowSpeedGroup."
+        ::= { etherGroups 1 }
+
+    etherCollisionTableGroup OBJECT-GROUP
+        OBJECTS     { dot3CollFrequencies
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing a histogram
+                    of packets successfully transmitted after
+                    experiencing exactly N collisions."
+        ::= { etherGroups 2 }
+
+    etherStats100MbsGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsIndex,
+                      dot3StatsAlignmentErrors,
+                      dot3StatsFCSErrors,
+                      dot3StatsSingleCollisionFrames,
+                      dot3StatsMultipleCollisionFrames,
+                      dot3StatsDeferredTransmissions,
+                      dot3StatsLateCollisions,
+                      dot3StatsExcessiveCollisions,
+                      dot3StatsInternalMacTransmitErrors,
+                      dot3StatsCarrierSenseErrors,
+                      dot3StatsFrameTooLongs,
+                      dot3StatsInternalMacReceiveErrors,
+                      dot3StatsEtherChipSet,
+                      dot3StatsSymbolErrors
+
+                    }
+        STATUS      deprecated
+        DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+                    A collection of objects providing information
+                    applicable to 100 Mb/sec ethernet-like network
+                    interfaces.
+
+                    This object group has been deprecated and
+                    replaced by etherStatsBaseGroup and
+                    etherStatsHighSpeedGroup."
+        ::= { etherGroups 3 }
+
+    etherStatsBaseGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsIndex,
+                      dot3StatsAlignmentErrors,
+                      dot3StatsFCSErrors,
+                      dot3StatsSingleCollisionFrames,
+                      dot3StatsMultipleCollisionFrames,
+                      dot3StatsDeferredTransmissions,
+                      dot3StatsLateCollisions,
+                      dot3StatsExcessiveCollisions,
+                      dot3StatsInternalMacTransmitErrors,
+                      dot3StatsCarrierSenseErrors,
+                      dot3StatsFrameTooLongs,
+                      dot3StatsInternalMacReceiveErrors
+                    }
+        STATUS      deprecated
+        DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+                    A collection of objects providing information
+                    applicable to all ethernet-like network
+                    interfaces.
+
+                    This object group has been deprecated and
+                    replaced by etherStatsBaseGroup2 and
+                    etherStatsHalfDuplexGroup, to separate
+                    objects which must be implemented by all
+                    ethernet-like network interfaces from
+                    objects that need only be implemented on
+                    ethernet-like network interfaces that are
+                    capable of half-duplex operation."
+        ::= { etherGroups 4 }
+
+    etherStatsLowSpeedGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsSQETestErrors }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+
+                    applicable to ethernet-like network interfaces
+                    capable of operating at 10 Mb/s or slower in
+                    half-duplex mode."
+        ::= { etherGroups 5 }
+
+    etherStatsHighSpeedGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsSymbolErrors }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    applicable to ethernet-like network interfaces
+                    capable of operating at 100 Mb/s or faster."
+        ::= { etherGroups 6 }
+
+    etherDuplexGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsDuplexStatus }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    about the duplex mode of an ethernet-like
+                    network interface."
+        ::= { etherGroups 7 }
+
+    etherControlGroup OBJECT-GROUP
+        OBJECTS     { dot3ControlFunctionsSupported,
+                      dot3ControlInUnknownOpcodes
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    about the MAC Control sublayer on ethernet-like
+                    network interfaces."
+        ::= { etherGroups 8 }
+
+    etherControlPauseGroup OBJECT-GROUP
+        OBJECTS     { dot3PauseAdminMode,
+                      dot3PauseOperMode,
+                      dot3InPauseFrames,
+                      dot3OutPauseFrames
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    about and control of the MAC Control PAUSE
+                    function on ethernet-like network interfaces."
+        ::= { etherGroups 9 }
+
+    etherStatsBaseGroup2 OBJECT-GROUP
+        OBJECTS     { dot3StatsIndex,
+                      dot3StatsAlignmentErrors,
+                      dot3StatsFCSErrors,
+                      dot3StatsInternalMacTransmitErrors,
+                      dot3StatsFrameTooLongs,
+                      dot3StatsInternalMacReceiveErrors
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    applicable to all ethernet-like network
+                    interfaces."
+        ::= { etherGroups 10 }
+
+    etherStatsHalfDuplexGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsSingleCollisionFrames,
+                      dot3StatsMultipleCollisionFrames,
+                      dot3StatsDeferredTransmissions,
+                      dot3StatsLateCollisions,
+                      dot3StatsExcessiveCollisions,
+                      dot3StatsCarrierSenseErrors
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    applicable only to half-duplex ethernet-like
+                    network interfaces."
+        ::= { etherGroups 11 }
+
+    etherHCStatsGroup OBJECT-GROUP
+        OBJECTS     { dot3HCStatsAlignmentErrors,
+                      dot3HCStatsFCSErrors,
+                      dot3HCStatsInternalMacTransmitErrors,
+                      dot3HCStatsFrameTooLongs,
+                      dot3HCStatsInternalMacReceiveErrors,
+                      dot3HCStatsSymbolErrors
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing high-capacity
+                    statistics applicable to higher-speed
+                    ethernet-like network interfaces."
+        ::= { etherGroups 12 }
+
+    etherHCControlGroup OBJECT-GROUP
+        OBJECTS     { dot3HCControlInUnknownOpcodes }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing high-capacity
+                    statistics for the MAC Control sublayer on
+                    higher-speed ethernet-like network interfaces."
+        ::= { etherGroups 13 }
+
+    etherHCControlPauseGroup OBJECT-GROUP
+        OBJECTS     { dot3HCInPauseFrames,
+                      dot3HCOutPauseFrames
+
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing high-capacity
+                    statistics for the MAC Control PAUSE function on
+                    higher-speed ethernet-like network interfaces."
+        ::= { etherGroups 14 }
+
+    etherRateControlGroup OBJECT-GROUP
+        OBJECTS     { dot3StatsRateControlAbility,
+                      dot3StatsRateControlStatus
+                    }
+        STATUS      current
+        DESCRIPTION "A collection of objects providing information
+                    about the Rate Control function on ethernet-like
+                    interfaces."
+        ::= { etherGroups 15 }
+
+END
diff --git a/snmp_builder/mibs/FC-MGMT-MIB.mib b/snmp_builder/mibs/FC-MGMT-MIB.mib
new file mode 100644
index 0000000..ca36e29
--- /dev/null
+++ b/snmp_builder/mibs/FC-MGMT-MIB.mib
@@ -0,0 +1,2205 @@
+   FC-MGMT-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE,
+       Integer32, Unsigned32, Counter32, Counter64, transmission
+                               FROM SNMPv2-SMI
+       MODULE-COMPLIANCE, OBJECT-GROUP
+                               FROM SNMPv2-CONF
+       TruthValue, TEXTUAL-CONVENTION
+                               FROM SNMPv2-TC
+       ifIndex                 FROM IF-MIB
+       SnmpAdminString         FROM SNMP-FRAMEWORK-MIB;
+
+   fcMgmtMIB MODULE-IDENTITY
+       LAST-UPDATED    "200504260000Z"  -- 26 April 2005
+       ORGANIZATION    "IETF IPS (IP-Storage) Working Group"
+       CONTACT-INFO
+               "        Keith McCloghrie
+                        Cisco Systems, Inc.
+                   Tel: +1 408 526-5260
+                E-mail: kzm@cisco.com
+                Postal: 170 West Tasman Drive
+                        San Jose, CA USA 95134
+               "
+       DESCRIPTION
+               "This module defines management information specific to
+               Fibre Channel-attached devices.
+
+               Copyright (C) The Internet Society (2005).  This version
+               of this MIB module is part of RFC 4044;  see the RFC
+               itself for full legal notices."
+      REVISION        "200504260000Z"  -- 26 April 2005
+      DESCRIPTION
+              "Initial version of the Fibre Channel Mgmt MIB module."
+     ::= { transmission 56 }
+
+ fcmgmtObjects       OBJECT IDENTIFIER ::= { fcMgmtMIB 1 }
+ fcmgmtNotifications OBJECT IDENTIFIER ::= { fcMgmtMIB 2 }
+ fcmgmtNotifPrefix   OBJECT IDENTIFIER ::= { fcmgmtNotifications 0 }
+ fcmgmtConformance   OBJECT IDENTIFIER ::= { fcMgmtMIB 3 }
+
+ --********************************
+ --  Textual Conventions
+ --
+
+ FcNameIdOrZero ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+             "The World Wide Name (WWN) associated with a Fibre Channel
+             (FC) entity.  WWNs were initially defined as 64-bits in
+             length.  The latest definition (for future use) is 128-bits
+             long.  The zero-length string value is used in
+             circumstances in which the WWN is unassigned/unknown."
+    SYNTAX  OCTET STRING (SIZE(0 | 8 | 16))
+
+FcAddressIdOrZero ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "A Fibre Channel Address ID, a 24-bit value unique within
+            the address space of a Fabric.  The zero-length string value
+            is used in circumstances in which the WWN is
+            unassigned/unknown."
+    SYNTAX  OCTET STRING (SIZE(0 | 3))
+
+FcDomainIdOrZero ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "The Domain Id (of an FC switch), or zero if the no Domain
+            Id has been assigned."
+    SYNTAX  Integer32 (0..239)
+
+FcPortType ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "The type of a Fibre Channel port, as indicated by the use
+            of the appropriate value assigned by IANA."
+    REFERENCE
+             "The IANA-maintained registry for
+              Fibre Channel port types (http://www.iana.org/)."
+    SYNTAX   Unsigned32
+
+FcClasses ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "A set of Fibre Channel classes of service."
+    REFERENCE
+             "Classes of service are described in FC-FS Section 13."
+    SYNTAX   BITS { classF(0), class1(1), class2(2), class3(3),
+                    class4(4), class5(5), class6(6) }
+
+FcBbCredit ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "The buffer-to-buffer credit of an FC port."
+    SYNTAX     Integer32 (0..32767)
+
+FcBbCreditModel ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "The buffer-to-buffer credit model of an Fx_Port."
+    SYNTAX    INTEGER { regular(1), alternate (2) }
+
+FcDataFieldSize ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "The Receive Data Field Size associated with an FC port."
+    SYNTAX     Integer32 (128..2112)
+
+FcUnitFunctions ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "A set of functions that a Fibre Channel Interconnect
+            Element or Platform might perform.  A value with no bits set
+            indicates the function(s) are unknown.  The individual bits
+            have the following meanings:
+
+            other - none of the following.
+
+            hub - a device that interconnects L_Ports, but does not
+            operate as an FL_Port.
+
+            switch - a fabric element conforming to the Fibre Channel
+            switch fabric set of standards (e.g., [FC-SW-3]).
+
+            bridge - a device that encapsulates Fibre Channel frames
+            within another protocol (e.g., [FC-BB], FC-BB-2).
+
+            gateway - a device that converts an FC-4 to another protocol
+            (e.g., FCP to iSCSI).
+
+            host - a computer system that provides end users with
+            services such as computation and storage access.
+
+            storageSubsys - an integrated collection of storage
+            controllers, storage devices, and necessary software that
+            provides storage services to one or more hosts.
+
+            storageAccessDev - a device that provides storage management
+            and access for heterogeneous hosts and heterogeneous devices
+            (e.g., medium changer).
+
+            nas - a device that connects to a network and provides file
+            access services.
+
+            wdmux - a device that modulates/demodulates each of several
+            data streams (e.g., Fibre Channel protocol data streams)
+            onto/from a different part of the light spectrum in an
+            optical fiber.
+
+            storageDevice - a disk/tape/etc. device (without the
+            controller and/or software required for it to be a
+            'storageSubsys')."
+    SYNTAX  BITS {
+                other(0),        -- none of the following
+                hub(1),
+                switch(2),
+                bridge(3),
+                gateway(4),
+                host(5),
+                storageSubsys(6),
+                storageAccessDev(7),
+                nas(8),
+                wdmux(9),
+                storageDevice(10)
+            }
+
+--********************************
+--  MIB object definitions
+--
+
+fcmInstanceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmInstanceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Information about the local Fibre Channel management
+            instances."
+    ::= { fcmgmtObjects 1 }
+
+fcmInstanceEntry OBJECT-TYPE
+    SYNTAX     FcmInstanceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of attributes for a particular local Fibre Channel
+            management instance."
+    INDEX { fcmInstanceIndex }
+    ::= { fcmInstanceTable 1 }
+
+FcmInstanceEntry ::=
+    SEQUENCE {
+        fcmInstanceIndex             Unsigned32,
+        fcmInstanceWwn               FcNameIdOrZero,
+        fcmInstanceFunctions         FcUnitFunctions,
+        fcmInstancePhysicalIndex     Integer32,
+        fcmInstanceSoftwareIndex     Integer32,
+        fcmInstanceStatus            INTEGER,
+        fcmInstanceTextName          SnmpAdminString,
+        fcmInstanceDescr             SnmpAdminString,
+        fcmInstanceFabricId          FcNameIdOrZero
+    }
+
+fcmInstanceIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An arbitrary integer value that uniquely identifies this
+            instance amongst all local Fibre Channel management
+            instances.
+
+            It is mandatory to keep this value constant between restarts
+            of the agent, and to make every possible effort to keep it
+            constant across restarts (but note, it is unrealistic to
+            expect it to remain constant across all re-configurations of
+            the local system, e.g., across the replacement of all non-
+            volatile storage)."
+    ::= { fcmInstanceEntry 1 }
+
+fcmInstanceWwn  OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If the instance has one (or more) WWN(s), then this object
+            contains that (or one of those) WWN(s).
+
+            If the instance does not have a WWN associated with it, then
+            this object contains the zero-length string."
+    ::= { fcmInstanceEntry 2 }
+
+fcmInstanceFunctions OBJECT-TYPE
+    SYNTAX     FcUnitFunctions
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "One (or more) Fibre Channel unit functions being performed
+            by this instance."
+    ::= { fcmInstanceEntry 3 }
+
+fcmInstancePhysicalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If this management instance corresponds to a physical
+            component (or to a hierarchy of physical components)
+            identified by the Entity-MIB, then this object's value is
+            the value of the entPhysicalIndex of that component (or of
+            the component at the root of that hierarchy).  If there is
+
+            no correspondence to a physical component (or no component
+            that has an entPhysicalIndex value), then the value of this
+            object is zero."
+    REFERENCE
+        "entPhysicalIndex is defined in the Entity MIB, RFC 2737."
+    ::= { fcmInstanceEntry 4 }
+
+fcmInstanceSoftwareIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If this management instance corresponds to an installed
+            software module identified in the Host Resources MIB, then
+            this object's value is the value of the hrSWInstalledIndex
+            of that module.  If there is no correspondence to an
+            installed software module (or no module that has a
+            hrSWInstalledIndex value), then the value of this object is
+            zero."
+    REFERENCE
+        "hrSWInstalledIndex is defined in the Host Resources MIB,
+         RFC 2790"
+    ::= { fcmInstanceEntry 5 }
+
+fcmInstanceStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   ok(2),      -- able to operate correctly
+                   warning(3), -- needs attention
+                   failed(4)   -- something has failed
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Overall status of the Fibre Channel entity/entities managed
+            by this management instance.  The value should reflect the
+            most serious status of such entities."
+    ::= { fcmInstanceEntry 6 }
+
+fcmInstanceTextName OBJECT-TYPE
+    SYNTAX     SnmpAdminString (SIZE(0..79))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "A textual name for this management instance and the Fibre
+            Channel entity/entities that it is managing."
+    ::= { fcmInstanceEntry 7 }
+
+fcmInstanceDescr OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "A textual description of this management instance and the
+            Fibre Channel entity/entities that it is managing."
+    ::= { fcmInstanceEntry 8 }
+
+fcmInstanceFabricId OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The globally unique Fabric Identifier that identifies the
+            fabric to which the Fibre Channel entity/entities managed by
+            this management instance are connected, or, of which they
+            are a part.  This is typically the Node WWN of the principal
+            switch of a Fibre Channel fabric.  The zero-length string
+            indicates that the fabric identifier is unknown (or not
+            applicable).
+
+            In the event that the Fibre Channel entity/entities managed
+            by this management instance is/are connected to multiple
+            fabrics, then this object records the first (known) one."
+    ::= { fcmInstanceEntry 9 }
+
+--********************************
+-- The Fibre Channel Switch Table
+--
+
+fcmSwitchTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmSwitchEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A table of information about Fibre Channel switches that
+            are managed by Fibre Channel management instances.  Each
+            Fibre Channel management instance can manage one or more
+            Fibre Channel switches."
+    ::= { fcmgmtObjects 2 }
+
+fcmSwitchEntry OBJECT-TYPE
+    SYNTAX     FcmSwitchEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Information about a particular Fibre Channel switch that is
+
+            managed by the management instance given by
+            fcmInstanceIndex."
+    INDEX { fcmInstanceIndex, fcmSwitchIndex }
+    ::= { fcmSwitchTable 1 }
+
+FcmSwitchEntry ::=
+    SEQUENCE {
+        fcmSwitchIndex         Unsigned32,
+        fcmSwitchDomainId      FcDomainIdOrZero,
+        fcmSwitchPrincipal     TruthValue,
+        fcmSwitchWWN           FcNameIdOrZero
+    }
+
+fcmSwitchIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An arbitrary integer that uniquely identifies a Fibre
+            Channel switch amongst those managed by one Fibre Channel
+            management instance.
+
+            It is mandatory to keep this value constant between restarts
+            of the agent, and to make every possible effort to keep it
+            constant across restarts."
+    ::= { fcmSwitchEntry 1 }
+
+fcmSwitchDomainId OBJECT-TYPE
+    SYNTAX     FcDomainIdOrZero
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The Domain Id of this switch.  A value of zero indicates
+            that a switch has not (yet) been assigned a Domain Id."
+    ::= { fcmSwitchEntry 2 }
+
+fcmSwitchPrincipal OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An indication of whether this switch is the principal
+            switch within its fabric."
+    ::= { fcmSwitchEntry 3 }
+
+fcmSwitchWWN  OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The World Wide Name of this switch."
+    ::= { fcmSwitchEntry 4 }
+
+--********************************
+-- The Fibre Channel Port Table
+--
+
+fcmPortTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Information about Fibre Channel ports.  Each Fibre Channel
+            port is represented by one entry in the IF-MIB's ifTable."
+    REFERENCE
+        "RFC 2863, The Interfaces Group MIB, June 2000."
+    ::= { fcmgmtObjects 3 }
+
+fcmPortEntry OBJECT-TYPE
+    SYNTAX     FcmPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Each entry contains information about a specific port."
+    INDEX { ifIndex }
+    ::= { fcmPortTable 1 }
+
+FcmPortEntry ::=
+    SEQUENCE {
+        fcmPortInstanceIndex    Unsigned32,
+        fcmPortWwn              FcNameIdOrZero,
+        fcmPortNodeWwn          FcNameIdOrZero,
+        fcmPortAdminType        FcPortType,
+        fcmPortOperType         FcPortType,
+        fcmPortFcCapClass       FcClasses,
+        fcmPortFcOperClass      FcClasses,
+        fcmPortTransmitterType  INTEGER,
+        fcmPortConnectorType    INTEGER,
+        fcmPortSerialNumber     SnmpAdminString,
+        fcmPortPhysicalNumber   Unsigned32,
+        fcmPortAdminSpeed       INTEGER,
+        fcmPortCapProtocols     BITS,
+        fcmPortOperProtocols    BITS
+
+    }
+
+fcmPortInstanceIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of fcmInstanceIndex by which the Fibre Channel
+            management instance, which manages this port, is identified
+            in the fcmInstanceTable."
+    ::= { fcmPortEntry 1 }
+
+fcmPortWwn OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The World Wide Name of the port, or the zero-length string
+            if the port does not have a WWN."
+     ::= { fcmPortEntry 2 }
+
+fcmPortNodeWwn OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The World Wide Name of the Node that contains this port, or
+            the zero-length string if the port does not have a node
+            WWN."
+     ::= { fcmPortEntry 3 }
+
+fcmPortAdminType OBJECT-TYPE
+    SYNTAX     FcPortType
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The administratively desired type of this port."
+    ::= { fcmPortEntry 4 }
+
+fcmPortOperType OBJECT-TYPE
+    SYNTAX     FcPortType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The current operational type of this port."
+    ::= { fcmPortEntry 5 }
+
+fcmPortFcCapClass OBJECT-TYPE
+    SYNTAX     FcClasses
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The classes of service capability of this port."
+    ::= { fcmPortEntry 6 }
+
+fcmPortFcOperClass OBJECT-TYPE
+    SYNTAX     FcClasses
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The classes of service that are currently operational on
+            this port.  For an FL_Port, this is the union of the classes
+            being supported across all attached NL_Ports."
+    ::= { fcmPortEntry 7 }
+
+fcmPortTransmitterType OBJECT-TYPE
+    SYNTAX     INTEGER {
+        unknown(1),
+        other(2),
+        shortwave850nm(3),
+        longwave1550nm(4),
+        longwave1310nm(5),
+        electrical(6)
+     }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The technology of the port transceiver."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.3"
+    ::= { fcmPortEntry 8 }
+
+fcmPortConnectorType OBJECT-TYPE
+    SYNTAX     INTEGER {
+        unknown(1),
+        other(2),
+        gbic(3),
+        embedded(4),
+        glm(5),
+        gbicSerialId(6),
+        gbicNoSerialId(7),
+        sfpSerialId(8),
+        sfpNoSerialId(9)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The module type of the port connector.  This object refers
+            to the hardware implementation of the port.  It will be
+            'embedded' if the hardware equivalent to Gigabit interface
+            card (GBIC) is part of the line card and is unremovable.  It
+            will be 'glm' if it's a gigabit link module (GLM).  It will
+            be 'gbicSerialId' if the GBIC serial id can be read, else it
+            will be 'gbicNoSerialId'.  It will be 'sfpSerialId' if the
+            small form factor (SFP) pluggable GBICs serial id can be
+            read, else it will be 'sfpNoSerialId'."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.4"
+    ::= { fcmPortEntry 9 }
+
+fcmPortSerialNumber OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The serial number associated with the port (e.g., for a
+            GBIC).  If not applicable, the object's value is a zero-
+            length string."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.4"
+    ::= { fcmPortEntry 10 }
+
+fcmPortPhysicalNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This is the port's 'Physical Port Number' as defined by
+            GS-3."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.5"
+    ::= { fcmPortEntry 11 }
+
+fcmPortAdminSpeed OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   auto(1),
+                   eighthGbs(2),   -- 125Mbs
+                   quarterGbs(3),  -- 250Mbs
+                   halfGbs(4),     -- 500Mbs
+                   oneGbs(5),      --   1Gbs
+                   twoGbs(6),      --   2Gbs
+                   fourGbs(7),     --   4Gbs
+                   tenGbs(8)       --  10Gbs
+
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The speed of the interface:
+
+                'auto'        - auto-negotiation
+                'tenGbs'      - 10Gbs
+                'fourGbs'     -  4Gbs
+                'twoGbs'      -  2Gbs
+                'oneGbs'      -  1Gbs
+                'halfGbs'     - 500Mbs
+                'quarterGbs'  - 250Mbs
+                'eighthGbs'   - 125Mbs"
+    ::= { fcmPortEntry 12 }
+
+fcmPortCapProtocols OBJECT-TYPE
+    SYNTAX     BITS {
+                   unknown(0),
+                   loop(1),
+                   fabric(2),
+                   scsi(3),
+                   tcpIp(4),
+                   vi(5),
+                   ficon(6)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A bit mask specifying the higher level protocols that are
+            capable of running over this port.  Note that for generic
+            Fx_Ports, E_Ports, and B_Ports, this object will indicate
+            all protocols."
+    ::= { fcmPortEntry 13 }
+
+fcmPortOperProtocols OBJECT-TYPE
+    SYNTAX     BITS {
+                   unknown(0),
+                   loop(1),
+                   fabric(2),
+                   scsi(3),
+                   tcpIp(4),
+                   vi(5),
+                   ficon(6)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A bit mask specifying the higher level protocols that are
+            currently operational on this port.  For Fx_Ports, E_Ports,
+            and B_Ports, this object will typically have the value
+            'unknown'."
+    ::= { fcmPortEntry 14 }
+
+--********************************
+-- Port Statistics
+--
+
+fcmPortStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmPortStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of statistics for Fibre Channel ports."
+    ::= { fcmgmtObjects 4 }
+
+fcmPortStatsEntry OBJECT-TYPE
+    SYNTAX     FcmPortStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing statistics for a Fibre Channel port.
+            If any counter in this table suffers a discontinuity, the
+            value of ifCounterDiscontinuityTime (defined in the IF-MIB)
+            must be updated."
+    REFERENCE  "The Interfaces Group MIB, RFC 2863, June 2000."
+    AUGMENTS   { fcmPortEntry }
+    ::= { fcmPortStatsTable 1 }
+
+FcmPortStatsEntry ::=
+    SEQUENCE {
+        fcmPortBBCreditZeros       Counter64,
+        fcmPortFullInputBuffers    Counter64,
+        fcmPortClass2RxFrames      Counter64,
+        fcmPortClass2RxOctets      Counter64,
+        fcmPortClass2TxFrames      Counter64,
+        fcmPortClass2TxOctets      Counter64,
+        fcmPortClass2Discards      Counter64,
+        fcmPortClass2RxFbsyFrames  Counter64,
+        fcmPortClass2RxPbsyFrames  Counter64,
+        fcmPortClass2RxFrjtFrames  Counter64,
+        fcmPortClass2RxPrjtFrames  Counter64,
+        fcmPortClass2TxFbsyFrames  Counter64,
+        fcmPortClass2TxPbsyFrames  Counter64,
+        fcmPortClass2TxFrjtFrames  Counter64,
+        fcmPortClass2TxPrjtFrames  Counter64,
+        fcmPortClass3RxFrames      Counter64,
+        fcmPortClass3RxOctets      Counter64,
+        fcmPortClass3TxFrames      Counter64,
+        fcmPortClass3TxOctets      Counter64,
+        fcmPortClass3Discards      Counter64,
+        fcmPortClassFRxFrames      Counter32,
+        fcmPortClassFRxOctets      Counter32,
+        fcmPortClassFTxFrames      Counter32,
+        fcmPortClassFTxOctets      Counter32,
+        fcmPortClassFDiscards      Counter32
+    }
+
+fcmPortBBCreditZeros OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of transitions in/out of the buffer-to-buffer
+            credit zero state.  The other side is not providing any
+            credit."
+    ::= { fcmPortStatsEntry 1 }
+
+fcmPortFullInputBuffers OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of occurrences when all input buffers of a port
+            were full and outbound buffer-to-buffer credit transitioned
+            to zero, i.e., there became no credit to provide to other
+            side."
+    ::= { fcmPortStatsEntry 2 }
+
+fcmPortClass2RxFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 2 frames received at this port."
+    ::= { fcmPortStatsEntry 3 }
+
+fcmPortClass2RxOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 2 frames received
+            at this port."
+    ::= { fcmPortStatsEntry 4 }
+
+fcmPortClass2TxFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 2 frames transmitted out of this port."
+    ::= { fcmPortStatsEntry 5 }
+
+fcmPortClass2TxOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 2 frames
+            transmitted out of this port."
+    ::= { fcmPortStatsEntry 6 }
+
+fcmPortClass2Discards OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 2 frames that were discarded upon
+            reception at this port."
+    ::= { fcmPortStatsEntry 7 }
+
+fcmPortClass2RxFbsyFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_BSY was returned to this port as
+            a result of a Class 2 frame that could not be delivered to
+            the other end of the link.  This can occur when either the
+            fabric or the destination port is temporarily busy.  Note
+            that this counter will never increment for an F_Port."
+    ::= { fcmPortStatsEntry 8 }
+
+fcmPortClass2RxPbsyFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_BSY was returned to this port as
+            a result of a Class 2 frame that could not be delivered to
+            the other end of the link.  This can occur when the
+
+            destination port is temporarily busy."
+    ::= { fcmPortStatsEntry 9 }
+
+fcmPortClass2RxFrjtFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_RJT was returned to this port as
+            a result of a Class 2 frame that was rejected by the fabric.
+            Note that this counter will never increment for an F_Port."
+    ::= { fcmPortStatsEntry 10 }
+
+fcmPortClass2RxPrjtFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_RJT was returned to this port as
+            a result of a Class 2 frame that was rejected at the
+            destination N_Port."
+    ::= { fcmPortStatsEntry 11 }
+
+fcmPortClass2TxFbsyFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_BSY was generated by this port
+            as a result of a Class 2 frame that could not be delivered
+            because either the Fabric or the destination port was
+            temporarily busy.  Note that this counter will never
+            increment for an N_Port."
+    ::= { fcmPortStatsEntry 12 }
+
+fcmPortClass2TxPbsyFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_BSY was generated by this port
+            as a result of a Class 2 frame that could not be delivered
+            because the destination port was temporarily busy.  Note
+            that this counter will never increment for an F_Port."
+    ::= { fcmPortStatsEntry 13 }
+
+fcmPortClass2TxFrjtFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_RJT was generated by this port
+            as a result of a Class 2 frame being rejected by the fabric.
+            Note that this counter will never increment for an N_Port."
+    ::= { fcmPortStatsEntry 14 }
+
+fcmPortClass2TxPrjtFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_RJT was generated by this port
+            as a result of a Class 2 frame being rejected at the
+            destination N_Port.  Note that this counter will never
+            increment for an F_Port."
+    ::= { fcmPortStatsEntry 15 }
+
+fcmPortClass3RxFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 3 frames received at this port."
+    ::= { fcmPortStatsEntry 16 }
+
+fcmPortClass3RxOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 3 frames received
+            at this port."
+    ::= { fcmPortStatsEntry 17 }
+
+fcmPortClass3TxFrames OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 3 frames transmitted out of this port."
+    ::= { fcmPortStatsEntry 18 }
+
+fcmPortClass3TxOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 3 frames
+            transmitted out of this port."
+    ::= { fcmPortStatsEntry 19 }
+
+fcmPortClass3Discards OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 3 frames that were discarded upon
+            reception at this port."
+    ::= { fcmPortStatsEntry 20 }
+
+fcmPortClassFRxFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class F frames received at this port."
+    ::= { fcmPortStatsEntry 21 }
+
+fcmPortClassFRxOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class F frames received
+            at this port."
+    ::= { fcmPortStatsEntry 22 }
+
+fcmPortClassFTxFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class F frames transmitted out of this port."
+    ::= { fcmPortStatsEntry 23 }
+
+fcmPortClassFTxOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class F frames
+            transmitted out of this port."
+    ::= { fcmPortStatsEntry 24 }
+
+fcmPortClassFDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class F frames that were discarded upon
+            reception at this port."
+    ::= { fcmPortStatsEntry 25 }
+
+--********************************
+-- Port Low-capacity Statistics
+--
+-- these are Counter32 "low-capacity" counters for systems
+-- that do not support Counter64's
+
+fcmPortLcStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmPortLcStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of Counter32-based statistics for systems that do
+            not support Counter64."
+    ::= { fcmgmtObjects 5 }
+
+fcmPortLcStatsEntry OBJECT-TYPE
+    SYNTAX     FcmPortLcStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing low-capacity (i.e., based on Counter32)
+            statistics for a Fibre Channel port.  If any counter in this
+            table suffers a discontinuity, the value of
+            ifCounterDiscontinuityTime (defined in the IF-MIB) must be
+            updated."
+    REFERENCE  "The Interfaces Group MIB, RFC 2863, June 2000."
+    AUGMENTS   { fcmPortEntry }
+    ::= { fcmPortLcStatsTable 1 }
+
+FcmPortLcStatsEntry ::=
+    SEQUENCE {
+        fcmPortLcBBCreditZeros       Counter32,
+        fcmPortLcFullInputBuffers    Counter32,
+        fcmPortLcClass2RxFrames      Counter32,
+        fcmPortLcClass2RxOctets      Counter32,
+        fcmPortLcClass2TxFrames      Counter32,
+        fcmPortLcClass2TxOctets      Counter32,
+        fcmPortLcClass2Discards      Counter32,
+        fcmPortLcClass2RxFbsyFrames  Counter32,
+        fcmPortLcClass2RxPbsyFrames  Counter32,
+        fcmPortLcClass2RxFrjtFrames  Counter32,
+        fcmPortLcClass2RxPrjtFrames  Counter32,
+        fcmPortLcClass2TxFbsyFrames  Counter32,
+        fcmPortLcClass2TxPbsyFrames  Counter32,
+        fcmPortLcClass2TxFrjtFrames  Counter32,
+        fcmPortLcClass2TxPrjtFrames  Counter32,
+        fcmPortLcClass3RxFrames      Counter32,
+        fcmPortLcClass3RxOctets      Counter32,
+        fcmPortLcClass3TxFrames      Counter32,
+        fcmPortLcClass3TxOctets      Counter32,
+        fcmPortLcClass3Discards      Counter32
+    }
+
+fcmPortLcBBCreditZeros OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of transitions in/out of the buffer-to-buffer
+            credit zero state.  The other side is not providing any
+            credit."
+    ::= { fcmPortLcStatsEntry 1 }
+
+fcmPortLcFullInputBuffers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of occurrences when all input buffers of a port
+            were full and outbound buffer-to-buffer credit transitioned
+            to zero, i.e., there became no credit to provide to other
+            side."
+    ::= { fcmPortLcStatsEntry 2 }
+
+fcmPortLcClass2RxFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 2 frames received at this port."
+    ::= { fcmPortLcStatsEntry 3 }
+
+fcmPortLcClass2RxOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 2 frames received
+            at this port."
+    ::= { fcmPortLcStatsEntry 4 }
+
+fcmPortLcClass2TxFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 2 frames transmitted out of this port."
+    ::= { fcmPortLcStatsEntry 5 }
+
+fcmPortLcClass2TxOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 2 frames
+            transmitted out of this port."
+    ::= { fcmPortLcStatsEntry 6 }
+
+fcmPortLcClass2Discards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 2 frames that were discarded upon
+            reception at this port."
+    ::= { fcmPortLcStatsEntry 7 }
+
+fcmPortLcClass2RxFbsyFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_BSY was returned to this port as
+            a result of a Class 2 frame that could not be delivered to
+            the other end of the link.  This can occur when either the
+            fabric or the destination port is temporarily busy.  Note
+            that this counter will never increment for an F_Port."
+    ::= { fcmPortLcStatsEntry 8 }
+
+fcmPortLcClass2RxPbsyFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_BSY was returned to this port as
+            a result of a Class 2 frame that could not be delivered to
+            the other end of the link.  This can occur when the
+            destination port is temporarily busy."
+    ::= { fcmPortLcStatsEntry 9 }
+
+fcmPortLcClass2RxFrjtFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_RJT was returned to this port as
+            a result of a Class 2 frame that was rejected by the fabric.
+            Note that this counter will never increment for an F_Port."
+    ::= { fcmPortLcStatsEntry 10 }
+
+fcmPortLcClass2RxPrjtFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_RJT was returned to this port as
+            a result of a Class 2 frame that was rejected at the
+            destination N_Port."
+    ::= { fcmPortLcStatsEntry 11 }
+
+fcmPortLcClass2TxFbsyFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_BSY was generated by this port
+            as a result of a Class 2 frame that could not be delivered
+            because either the Fabric or the destination port was
+            temporarily busy.  Note that this counter will never
+            increment for an N_Port."
+    ::= { fcmPortLcStatsEntry 12 }
+
+fcmPortLcClass2TxPbsyFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_BSY was generated by this port
+            as a result of a Class 2 frame that could not be delivered
+            because the destination port was temporarily busy.  Note
+            that this counter will never increment for an F_Port."
+    ::= { fcmPortLcStatsEntry 13 }
+
+fcmPortLcClass2TxFrjtFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that F_RJT was generated by this port
+            as a result of a Class 2 frame being rejected by the fabric.
+            Note that this counter will never increment for an N_Port."
+    ::= { fcmPortLcStatsEntry 14 }
+
+fcmPortLcClass2TxPrjtFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that P_RJT was generated by this port
+            as a result of a Class 2 frame being rejected at the
+            destination N_Port.  Note that this counter will never
+            increment for an F_Port."
+    ::= { fcmPortLcStatsEntry 15 }
+
+fcmPortLcClass3RxFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 3 frames received at this port."
+    ::= { fcmPortLcStatsEntry 16 }
+
+fcmPortLcClass3RxOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 3 frames received
+            at this port."
+    ::= { fcmPortLcStatsEntry 17 }
+
+fcmPortLcClass3TxFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 3 frames transmitted out of this port."
+    ::= { fcmPortLcStatsEntry 18 }
+
+fcmPortLcClass3TxOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in Class 3 frames
+            transmitted out of this port."
+    ::= { fcmPortLcStatsEntry 19 }
+
+fcmPortLcClass3Discards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Class 3 frames that were discarded upon
+            reception at this port."
+    ::= { fcmPortLcStatsEntry 20 }
+
+--********************************
+-- Port Error Counters
+--
+
+fcmPortErrorsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmPortErrorsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Error counters for Fibre Channel ports."
+    ::= { fcmgmtObjects 6 }
+
+fcmPortErrorsEntry OBJECT-TYPE
+    SYNTAX     FcmPortErrorsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Error counters for a Fibre Channel port.  If any counter in
+            this table suffers a discontinuity, the value of
+            ifCounterDiscontinuityTime (defined in the IF-MIB) must be
+            updated."
+    REFERENCE  "The Interfaces Group MIB, RFC 2863, June 2000."
+    AUGMENTS   { fcmPortEntry }
+    ::= { fcmPortErrorsTable 1 }
+
+FcmPortErrorsEntry ::=
+    SEQUENCE {
+        fcmPortRxLinkResets             Counter32,
+        fcmPortTxLinkResets             Counter32,
+        fcmPortLinkResets               Counter32,
+        fcmPortRxOfflineSequences       Counter32,
+        fcmPortTxOfflineSequences       Counter32,
+        fcmPortLinkFailures             Counter32,
+        fcmPortLossofSynchs             Counter32,
+        fcmPortLossofSignals            Counter32,
+        fcmPortPrimSeqProtocolErrors    Counter32,
+        fcmPortInvalidTxWords           Counter32,
+        fcmPortInvalidCRCs              Counter32,
+        fcmPortInvalidOrderedSets       Counter32,
+        fcmPortFrameTooLongs            Counter32,
+        fcmPortTruncatedFrames          Counter32,
+        fcmPortAddressErrors            Counter32,
+        fcmPortDelimiterErrors          Counter32,
+        fcmPortEncodingDisparityErrors  Counter32,
+        fcmPortOtherErrors              Counter32
+    }
+
+fcmPortRxLinkResets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Link Reset (LR) Primitive Sequences
+            received."
+    ::= { fcmPortErrorsEntry 1 }
+
+fcmPortTxLinkResets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Link Reset (LR) Primitive Sequences
+            transmitted."
+    ::= { fcmPortErrorsEntry 2 }
+
+fcmPortLinkResets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times the reset link protocol was initiated
+            on this port.  This includes the number of Loop
+            Initialization Primitive (LIP) events on an arbitrated loop
+            port."
+    ::= { fcmPortErrorsEntry 3 }
+
+fcmPortRxOfflineSequences OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Offline (OLS) Primitive Sequences received at
+            this port."
+    ::= { fcmPortErrorsEntry 4 }
+
+fcmPortTxOfflineSequences OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Offline (OLS) Primitive Sequences transmitted
+            by this port."
+    ::= { fcmPortErrorsEntry 5 }
+
+fcmPortLinkFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of link failures.  This count is part of FC-PH's
+            Link Error Status Block (LESB)."
+    REFERENCE
+           "FC-PH, rev 4.3, 1 June 1994, section 29.8 [FC-PH]."
+    ::= { fcmPortErrorsEntry 6 }
+
+fcmPortLossofSynchs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of instances of synchronization loss detected at
+            this port.  This count is part of FC-PH's Link Error Status
+            Block (LESB)."
+    REFERENCE
+           "FC-PH, rev 4.3, 1 June 1994, section 29.8."
+    ::= { fcmPortErrorsEntry 7 }
+
+fcmPortLossofSignals OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of instances of signal loss detected at this
+            port.  This count is part of FC-PH's Link Error Status Block
+            (LESB)."
+    REFERENCE
+           "FC-PH, rev 4.3, 1 June 1994, section 29.8."
+    ::= { fcmPortErrorsEntry 8 }
+
+fcmPortPrimSeqProtocolErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of primitive sequence protocol errors detected
+            at this port.  This count is part of FC-PH's Link Error
+            Status Block (LESB)."
+    REFERENCE
+           "FC-PH, rev 4.3, 1 June 1994, section 29.8."
+    ::= { fcmPortErrorsEntry 9 }
+
+fcmPortInvalidTxWords OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of invalid transmission words received at this
+            port.  This count is part of FC-PH's Link Error Status Block
+            (LESB)."
+    REFERENCE
+           "FC-PH, rev 4.3, 1 June 1994, section 29.8."
+    ::= { fcmPortErrorsEntry 10 }
+
+fcmPortInvalidCRCs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of frames received with an invalid CRC.  This
+            count is part of FC-PH's Link Error Status Block (LESB)."
+    REFERENCE
+           "FC-PH, rev 4.3, 1 June 1994, section 29.8."
+    ::= { fcmPortErrorsEntry 11 }
+
+fcmPortInvalidOrderedSets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of invalid ordered sets received at this port."
+    ::= { fcmPortErrorsEntry 12 }
+
+fcmPortFrameTooLongs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of frames received at this port for which the
+            frame length was greater than what was agreed to in
+            FLOGI/PLOGI.  This could be caused by losing the end of
+            frame delimiter."
+    ::= { fcmPortErrorsEntry 13 }
+
+fcmPortTruncatedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of frames received at this port for which the
+
+            frame length was less than the minimum indicated by the
+            frame header - normally 24 bytes, but it could be more if
+            the DFCTL field indicates an optional header should have
+            been present."
+    ::= { fcmPortErrorsEntry 14 }
+
+fcmPortAddressErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of frames received with unknown addressing; for
+            example, an unknown SID or DID."
+    ::= { fcmPortErrorsEntry 15 }
+
+fcmPortDelimiterErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of invalid frame delimiters received at this
+            port.  An example is a frame with a class 2 start and a
+            class 3 at the end."
+    ::= { fcmPortErrorsEntry 16 }
+
+fcmPortEncodingDisparityErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of encoding disparity errors received at this
+            port."
+    ::= { fcmPortErrorsEntry 17 }
+
+fcmPortOtherErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of errors that were detected on this port but
+            not counted by any other error counter in this row."
+    ::= { fcmPortErrorsEntry 18 }
+
+--********************************
+-- The Fibre Channel Fx_Port Table
+--
+
+fcmFxPortTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmFxPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Additional information about Fibre Channel ports that is
+            specific to Fx_Ports.  This table will contain one entry for
+            each fcmPortTable entry that represents an Fx_Port."
+    ::= { fcmgmtObjects 7 }
+
+fcmFxPortEntry OBJECT-TYPE
+    SYNTAX     FcmFxPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Each entry contains information about a specific Fx_Port."
+    INDEX { ifIndex }
+    ::= { fcmFxPortTable 1 }
+
+FcmFxPortEntry ::=
+    SEQUENCE {
+        fcmFxPortRatov                  Unsigned32,
+        fcmFxPortEdtov                  Unsigned32,
+        fcmFxPortRttov                  Unsigned32,
+        fcmFxPortHoldTime               Unsigned32,
+        fcmFxPortCapBbCreditMax         FcBbCredit,
+        fcmFxPortCapBbCreditMin         FcBbCredit,
+        fcmFxPortCapDataFieldSizeMax    FcDataFieldSize,
+        fcmFxPortCapDataFieldSizeMin    FcDataFieldSize,
+        fcmFxPortCapClass2SeqDeliv      TruthValue,
+        fcmFxPortCapClass3SeqDeliv      TruthValue,
+        fcmFxPortCapHoldTimeMax         Unsigned32,
+        fcmFxPortCapHoldTimeMin         Unsigned32
+    }
+
+fcmFxPortRatov OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Resource_Allocation_Timeout Value configured for this
+            Fx_Port.  This is used as the timeout value for determining
+            when to reuse an Nx_Port resource such as a
+
+            Recovery_Qualifier.  It represents the Error_Detect_Timeout
+            value (see fcmFxPortEdtov) plus twice the maximum time that
+            a frame may be delayed within the Fabric and still be
+            delivered."
+    ::= { fcmFxPortEntry 1 }
+
+fcmFxPortEdtov OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Error_Detect_Timeout value configured for this Fx_Port.
+            This is used as the timeout value for detecting an error
+            condition."
+    ::= { fcmFxPortEntry 2 }
+
+fcmFxPortRttov OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Receiver_Transmitter_Timeout value of this Fx_Port.
+            This is used by the receiver logic to detect a Loss of
+            Synchronization."
+    ::= { fcmFxPortEntry 3 }
+
+fcmFxPortHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "microseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum time that this Fx_Port shall hold a frame
+            before discarding the frame if it is unable to deliver the
+            frame.  The value 0 means that this Fx_Port does not support
+            this parameter."
+    ::= { fcmFxPortEntry 4 }
+
+fcmFxPortCapBbCreditMax OBJECT-TYPE
+    SYNTAX      FcBbCredit
+    UNITS       "buffers"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of receive buffers that this port is
+            capable of making available for holding frames from attached
+
+            Nx_Port(s)."
+    ::= { fcmFxPortEntry 5 }
+
+fcmFxPortCapBbCreditMin OBJECT-TYPE
+    SYNTAX      FcBbCredit
+    UNITS       "buffers"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The minimum number of receive buffers that this port is
+            capable of making available for holding frames from attached
+            Nx_Port(s)."
+    ::= { fcmFxPortEntry 6 }
+
+fcmFxPortCapDataFieldSizeMax OBJECT-TYPE
+    SYNTAX      FcDataFieldSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum size in bytes of the Data Field in a frame that
+            this Fx_Port is capable of receiving from an attached
+            Nx_Port."
+    ::= { fcmFxPortEntry 7 }
+
+fcmFxPortCapDataFieldSizeMin OBJECT-TYPE
+    SYNTAX      FcDataFieldSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The minimum size in bytes of the Data Field in a frame that
+            this Fx_Port is capable of receiving from an attached
+            Nx_Port."
+    ::= { fcmFxPortEntry 8 }
+
+fcmFxPortCapClass2SeqDeliv OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether this Fx_Port is capable of
+            supporting Class 2 Sequential Delivery."
+    ::= { fcmFxPortEntry 9 }
+
+fcmFxPortCapClass3SeqDeliv OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether this Fx_Port is capable of
+            supporting Class 3 Sequential Delivery."
+    ::= { fcmFxPortEntry 10 }
+
+fcmFxPortCapHoldTimeMax OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "microseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum holding time that this Fx_Port is capable of
+            supporting."
+    ::= { fcmFxPortEntry 11 }
+
+fcmFxPortCapHoldTimeMin OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "microseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The minimum holding time that this Fx_Port is capable of
+            supporting."
+    ::= { fcmFxPortEntry 12 }
+
+--********************************
+-- The Fibre Channel Inter-Switch Port Table
+--
+
+fcmISPortTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FcmISPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Additional information about E_Ports, B_Ports, and any
+            other type of Fibre Channel port to which inter-switch links
+            can be connected.  This table will contain one entry for
+            each fcmPortTable entry that represents such a port."
+    ::= { fcmgmtObjects 8 }
+
+fcmISPortEntry OBJECT-TYPE
+    SYNTAX     FcmISPortEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Each entry contains information about a specific port
+            connected to an inter-switch link."
+    INDEX { ifIndex }
+    ::= { fcmISPortTable 1 }
+
+FcmISPortEntry ::=
+    SEQUENCE {
+        fcmISPortClassFCredit           FcBbCredit,
+        fcmISPortClassFDataFieldSize    FcDataFieldSize
+    }
+
+fcmISPortClassFCredit OBJECT-TYPE
+    SYNTAX      FcBbCredit
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of Class F data frames that can be
+            transmitted by the inter-switch port without receipt of ACK
+            or Link_Response frames."
+    ::= { fcmISPortEntry 1 }
+
+fcmISPortClassFDataFieldSize OBJECT-TYPE
+    SYNTAX      FcDataFieldSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Receive Data Field Size that the inter-switch port has
+            agreed to support for Class F frames to/from this port.  The
+            size specifies the largest Data Field Size for an FT_1
+            frame."
+    ::= { fcmISPortEntry 2 }
+
+--********************************
+-- The Fabric Login table
+--
+-- This table contains the information held by FC switches
+-- about the Nx_Ports that are logged-in/attached to their
+-- Fx_Ports
+
+fcmFLoginTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF FcmFLoginEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table that contains one entry for each Nx_Port logged-
+            in/attached to a particular Fx_Port in the switch.  Each
+            entry contains the services parameters established during
+            the most recent Fabric Login, explicit or implicit.  Note
+            that an Fx_Port may have one or more Nx_Ports attached to
+            it."
+    ::= { fcmgmtObjects 9 }
+
+fcmFLoginEntry OBJECT-TYPE
+    SYNTAX      FcmFLoginEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing service parameters established from a
+            successful Fabric Login."
+    INDEX { ifIndex, fcmFLoginNxPortIndex }
+    ::= { fcmFLoginTable 1 }
+
+FcmFLoginEntry ::=
+    SEQUENCE {
+        fcmFLoginNxPortIndex             Unsigned32,
+        fcmFLoginPortWwn                 FcNameIdOrZero,
+        fcmFLoginNodeWwn                 FcNameIdOrZero,
+        fcmFLoginBbCreditModel           FcBbCreditModel,
+        fcmFLoginBbCredit                FcBbCredit,
+        fcmFLoginClassesAgreed           FcClasses,
+        fcmFLoginClass2SeqDelivAgreed    TruthValue,
+        fcmFLoginClass2DataFieldSize     FcDataFieldSize,
+        fcmFLoginClass3SeqDelivAgreed    TruthValue,
+        fcmFLoginClass3DataFieldSize     FcDataFieldSize
+    }
+
+fcmFLoginNxPortIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary integer that uniquely identifies an Nx_Port
+            amongst all those attached to the Fx_Port indicated by
+            ifIndex.
+
+            After a value of this object is assigned to a particular
+            Nx_Port, that value can be re-used when and only when it is
+            assigned to the same Nx_Port, or, after a reset of the value
+            of the relevant instance of ifCounterDiscontinuityTime."
+    REFERENCE  "The Interfaces Group MIB, RFC 2863, June 2000."
+    ::= { fcmFLoginEntry 1 }
+
+fcmFLoginPortWwn  OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The port name of the attached Nx_Port, or the zero-length
+            string if unknown."
+    ::= { fcmFLoginEntry 2 }
+
+fcmFLoginNodeWwn  OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The node name of the attached Nx_Port, or the zero-length
+            string if unknown."
+    ::= { fcmFLoginEntry 3 }
+
+fcmFLoginBbCreditModel OBJECT-TYPE
+    SYNTAX      FcBbCreditModel
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The buffer-to-buffer credit model in use by the Fx_Port."
+    ::= { fcmFLoginEntry 4 }
+
+fcmFLoginBbCredit OBJECT-TYPE
+    SYNTAX      FcBbCredit
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of buffers available for holding frames to be
+
+            transmitted to the attached Nx_Port.  These buffers are for
+            buffer-to-buffer flow control in the direction from Fx_Port
+            to Nx_Port."
+    ::= { fcmFLoginEntry 5 }
+
+fcmFLoginClassesAgreed OBJECT-TYPE
+    SYNTAX      FcClasses
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Classes of Service that the Fx_Port has agreed to
+            support for this Nx_Port."
+    ::= { fcmFLoginEntry 6 }
+
+fcmFLoginClass2SeqDelivAgreed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether the Fx_Port has agreed to support
+            Class 2 sequential delivery for this Nx_Port.  This is only
+            meaningful if Class 2 service has been agreed upon."
+    ::= { fcmFLoginEntry 7 }
+
+fcmFLoginClass2DataFieldSize OBJECT-TYPE
+    SYNTAX      FcDataFieldSize
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Receive Data Field Size that the Fx_Port has agreed to
+            support for Class 2 frames to/from this Nx_Port.  The size
+            specifies the largest Data Field Size for an FT_1 frame.
+            This is only meaningful if Class 2 service has been agreed
+            upon."
+    ::= { fcmFLoginEntry 8 }
+
+fcmFLoginClass3SeqDelivAgreed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of whether the Fx_Port has agreed to support
+            Class 3 sequential delivery for this Nx_Port.  This is only
+            meaningful if Class 3 service has been agreed upon."
+    ::= { fcmFLoginEntry 9 }
+
+fcmFLoginClass3DataFieldSize OBJECT-TYPE
+    SYNTAX      FcDataFieldSize
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Receive Data Field Size that the Fx_Port has agreed to
+            support for Class 3 frames to/from this Nx_Port.  The size
+            specifies the largest Data Field Size for an FT_1 frame.
+            This is only meaningful if Class 3 service has been agreed
+            upon."
+    ::= { fcmFLoginEntry 10 }
+
+--********************************
+-- The Link table
+--
+-- This table is intended to assist management applications
+-- in determining the topology of the network.  The table
+-- contains any recent information the known to the agent
+-- about Fibre Channel links, not only those that terminate at
+-- a local port but also any others for which information
+-- is known.
+
+fcmLinkTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF FcmLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table containing any Fibre Channel link information that
+            is known to local Fibre Channel managed instances.  One end
+            of such a link is typically at a local port, but the table
+            can also contain information on links for which neither end
+            is a local port.
+
+            If one end of a link terminates locally, then that end is
+            termed 'end1'; the other end is termed 'end2'."
+    ::= { fcmgmtObjects 10 }
+
+fcmLinkEntry OBJECT-TYPE
+    SYNTAX      FcmLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing information that a particular Fibre
+            Channel managed instance has about a Fibre Channel link.
+
+            The two ends of the link are called 'end1' and 'end2'."
+    INDEX { fcmInstanceIndex, fcmLinkIndex }
+    ::= { fcmLinkTable 1 }
+
+FcmLinkEntry ::=
+   SEQUENCE {
+        fcmLinkIndex               Unsigned32,
+        fcmLinkEnd1NodeWwn         FcNameIdOrZero,
+        fcmLinkEnd1PhysPortNumber  Unsigned32,
+        fcmLinkEnd1PortWwn         FcNameIdOrZero,
+        fcmLinkEnd2NodeWwn         FcNameIdOrZero,
+        fcmLinkEnd2PhysPortNumber  Unsigned32,
+        fcmLinkEnd2PortWwn         FcNameIdOrZero,
+        fcmLinkEnd2AgentAddress    SnmpAdminString,
+        fcmLinkEnd2PortType        FcPortType,
+        fcmLinkEnd2UnitType        FcUnitFunctions,
+        fcmLinkEnd2FcAddressId     FcAddressIdOrZero
+   }
+
+fcmLinkIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary integer that uniquely identifies one link
+            within the set of links about which a particular managed
+            instance has information."
+    ::= { fcmLinkEntry 1 }
+
+fcmLinkEnd1NodeWwn  OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The node name of end1, or the zero-length string if
+            unknown."
+    ::= { fcmLinkEntry 2 }
+
+fcmLinkEnd1PhysPortNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The physical port number of end1, or zero if unknown."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.5"
+    ::= { fcmLinkEntry 3 }
+
+fcmLinkEnd1PortWwn OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The port WWN of end1, or the zero-length string if unknown.
+            ('end1' is local if this value is equal to the value of
+            fcmPortWwn in one of the rows of the fcmPortTable.)"
+    ::= { fcmLinkEntry 4 }
+
+fcmLinkEnd2NodeWwn  OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The node name of end2, or the zero-length string if
+            unknown."
+    ::= { fcmLinkEntry 5 }
+
+fcmLinkEnd2PhysPortNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The physical port number of end2, or zero if unknown."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.5"
+    ::= { fcmLinkEntry 6 }
+
+fcmLinkEnd2PortWwn OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The port WWN of end2, or the zero-length string if
+            unknown."
+    ::= { fcmLinkEntry 7 }
+
+fcmLinkEnd2AgentAddress OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The address of the management agent for the Fibre Channel
+            Interconnect Element or Platform of which end2 is a part.
+            The GS-4 specification provides some information about
+            management agents.  If the address is unknown, the value of
+            this object is the zero-length string."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.1.7"
+    ::= { fcmLinkEntry 8 }
+
+fcmLinkEnd2PortType OBJECT-TYPE
+    SYNTAX      FcPortType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The port type of end2."
+    REFERENCE
+        "FC-GS-3, section 6.1.2.2.2"
+    ::= { fcmLinkEntry 9 }
+
+fcmLinkEnd2UnitType OBJECT-TYPE
+    SYNTAX      FcUnitFunctions
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The type of/function(s) performed by the Fibre Channel
+            Interconnect Element or Platform of which end2 is a part."
+    REFERENCE
+        "FC-GS-3, sections 6.1.2.1.2 and 6.1.2.3.2"
+    ::= { fcmLinkEntry 10 }
+
+fcmLinkEnd2FcAddressId OBJECT-TYPE
+    SYNTAX      FcAddressIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Fibre Channel Address ID of end2, or the zero-length
+            string if unknown."
+    ::= { fcmLinkEntry 11 }
+
+--********************************
+-- Conformance Section
+--
+
+fcmgmtCompliances OBJECT IDENTIFIER ::= { fcmgmtConformance 1 }
+fcmgmtGroups      OBJECT IDENTIFIER ::= { fcmgmtConformance 2 }
+
+fcmgmtCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "Describes the requirements for compliance to this Fibre
+            Channel Management MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { fcmInstanceBasicGroup,
+                           fcmPortBasicGroup,
+                           fcmPortErrorsGroup }
+
+        GROUP   fcmPortStatsGroup
+        DESCRIPTION
+            "This group is mandatory for all systems that
+            are able to support the Counter64 date type."
+
+        GROUP   fcmPortClass23StatsGroup
+        DESCRIPTION
+            "This group is mandatory only for systems that
+            keep class-specific traffic statistics on Class 2
+            and Class 3 traffic and are able to support the
+            Counter64 date type."
+
+        GROUP   fcmPortClassFStatsGroup
+        DESCRIPTION
+            "This group is mandatory only for FC switches that
+            keep statistics on Class F traffic."
+
+        GROUP   fcmPortLcStatsGroup
+        DESCRIPTION
+            "This group is mandatory only for agents that can not
+            support the Counter64 data type and/or need to provide
+            information accessible by SNMPv1 applications."
+
+        GROUP   fcmSwitchBasicGroup
+        DESCRIPTION
+            "This group is mandatory only for Fibre Channel
+            managed instances that manage Fibre Channel
+            switches."
+
+        GROUP   fcmSwitchPortGroup
+        DESCRIPTION
+            "This group is mandatory only for Fibre Channel
+            managed instances that manage Fibre Channel
+            switches."
+
+        GROUP   fcmSwitchLoginGroup
+        DESCRIPTION
+            "This group is mandatory only for Fibre Channel
+            managed instances that manage Fibre Channel
+            switches."
+
+        GROUP fcmLinkBasicGroup
+        DESCRIPTION
+            "This group is optional."
+
+        OBJECT      fcmInstancePhysicalIndex
+        SYNTAX      Integer32 (0)
+        DESCRIPTION
+            "Implementation of a non-zero value is not required."
+
+        OBJECT      fcmInstanceSoftwareIndex
+        SYNTAX      Integer32 (0)
+        DESCRIPTION
+            "Implementation of a non-zero value is not required."
+
+        OBJECT      fcmInstanceTextName
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      fcmInstanceDescr
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      fcmPortAdminType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      fcmPortAdminSpeed
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      fcmSwitchDomainId
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      fcmISPortClassFCredit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { fcmgmtCompliances 1 }
+
+--********************************
+-- Object Groups
+--
+
+fcmInstanceBasicGroup OBJECT-GROUP
+    OBJECTS { fcmInstanceWwn, fcmInstanceFunctions,
+              fcmInstancePhysicalIndex, fcmInstanceSoftwareIndex,
+              fcmInstanceStatus, fcmInstanceTextName,
+              fcmInstanceDescr, fcmInstanceFabricId }
+    STATUS  current
+    DESCRIPTION
+            "Basic information about Fibre Channel managed instances."
+    ::= { fcmgmtGroups 1 }
+
+fcmSwitchBasicGroup OBJECT-GROUP
+    OBJECTS { fcmSwitchDomainId, fcmSwitchPrincipal, fcmSwitchWWN }
+    STATUS  current
+    DESCRIPTION
+            "Basic information about Fibre Channel switches."
+    ::= { fcmgmtGroups 2 }
+
+fcmPortBasicGroup OBJECT-GROUP
+    OBJECTS { fcmPortInstanceIndex, fcmPortWwn, fcmPortNodeWwn,
+              fcmPortAdminType, fcmPortOperType, fcmPortFcCapClass,
+              fcmPortFcOperClass, fcmPortTransmitterType,
+              fcmPortConnectorType, fcmPortSerialNumber,
+              fcmPortPhysicalNumber, fcmPortAdminSpeed,
+              fcmPortCapProtocols, fcmPortOperProtocols }
+    STATUS  current
+    DESCRIPTION
+            "Basic information about Fibre Channel ports."
+    ::= { fcmgmtGroups 3 }
+
+fcmPortStatsGroup OBJECT-GROUP
+    OBJECTS { fcmPortBBCreditZeros, fcmPortFullInputBuffers }
+    STATUS  current
+    DESCRIPTION
+            "Traffic statistics, which are not specific to any one class
+            of service, for Fibre Channel ports."
+    ::= { fcmgmtGroups 4 }
+
+fcmPortClass23StatsGroup OBJECT-GROUP
+    OBJECTS { fcmPortClass2RxFrames, fcmPortClass2RxOctets,
+              fcmPortClass2TxFrames, fcmPortClass2TxOctets,
+              fcmPortClass2Discards, fcmPortClass2RxFbsyFrames,
+              fcmPortClass2RxPbsyFrames,
+              fcmPortClass2RxFrjtFrames,
+              fcmPortClass2RxPrjtFrames,
+              fcmPortClass2TxFbsyFrames,
+              fcmPortClass2TxPbsyFrames,
+              fcmPortClass2TxFrjtFrames,
+              fcmPortClass2TxPrjtFrames, fcmPortClass3RxFrames,
+              fcmPortClass3RxOctets, fcmPortClass3TxFrames,
+              fcmPortClass3TxOctets, fcmPortClass3Discards }
+    STATUS  current
+    DESCRIPTION
+            "Traffic statistics for Class 2 and Class 3 traffic on Fibre
+            Channel ports."
+    ::= { fcmgmtGroups 5 }
+
+fcmPortClassFStatsGroup OBJECT-GROUP
+    OBJECTS { fcmPortClassFRxFrames,
+              fcmPortClassFRxOctets,
+              fcmPortClassFTxFrames,
+              fcmPortClassFTxOctets,
+              fcmPortClassFDiscards }
+    STATUS  current
+    DESCRIPTION
+            "Traffic statistics for Class F traffic on Fibre Channel
+            ports."
+    ::= { fcmgmtGroups 6 }
+
+fcmPortLcStatsGroup OBJECT-GROUP
+    OBJECTS { fcmPortLcBBCreditZeros, fcmPortLcFullInputBuffers,
+              fcmPortLcClass2RxFrames, fcmPortLcClass2RxOctets,
+              fcmPortLcClass2TxFrames, fcmPortLcClass2TxOctets,
+              fcmPortLcClass2Discards, fcmPortLcClass3Discards,
+              fcmPortLcClass3RxFrames, fcmPortLcClass3RxOctets,
+              fcmPortLcClass3TxFrames, fcmPortLcClass3TxOctets,
+              fcmPortLcClass2RxFbsyFrames,
+              fcmPortLcClass2RxPbsyFrames,
+              fcmPortLcClass2RxFrjtFrames,
+              fcmPortLcClass2RxPrjtFrames,
+              fcmPortLcClass2TxFbsyFrames,
+              fcmPortLcClass2TxPbsyFrames,
+              fcmPortLcClass2TxFrjtFrames,
+              fcmPortLcClass2TxPrjtFrames }
+    STATUS  current
+    DESCRIPTION
+            "Low-capacity (32-bit) statistics for Fibre Channel ports."
+    ::= { fcmgmtGroups 7 }
+
+fcmPortErrorsGroup OBJECT-GROUP
+    OBJECTS { fcmPortRxLinkResets, fcmPortTxLinkResets,
+              fcmPortLinkResets, fcmPortRxOfflineSequences,
+              fcmPortTxOfflineSequences, fcmPortLinkFailures,
+              fcmPortLossofSynchs, fcmPortLossofSignals,
+              fcmPortPrimSeqProtocolErrors, fcmPortInvalidTxWords,
+              fcmPortInvalidCRCs, fcmPortInvalidOrderedSets,
+              fcmPortFrameTooLongs, fcmPortTruncatedFrames,
+              fcmPortAddressErrors, fcmPortDelimiterErrors,
+              fcmPortEncodingDisparityErrors,
+              fcmPortOtherErrors }
+    STATUS  current
+    DESCRIPTION
+            "Error statistics for Fibre Channel ports."
+    ::= { fcmgmtGroups 8 }
+
+fcmSwitchPortGroup OBJECT-GROUP
+    OBJECTS { fcmFxPortRatov, fcmFxPortEdtov, fcmFxPortRttov,
+              fcmFxPortHoldTime, fcmFxPortCapBbCreditMax,
+              fcmFxPortCapBbCreditMin,
+              fcmFxPortCapDataFieldSizeMax,
+              fcmFxPortCapDataFieldSizeMin,
+              fcmFxPortCapClass2SeqDeliv,
+              fcmFxPortCapClass3SeqDeliv,
+              fcmFxPortCapHoldTimeMax,
+              fcmFxPortCapHoldTimeMin,
+              fcmISPortClassFCredit,
+              fcmISPortClassFDataFieldSize }
+    STATUS  current
+    DESCRIPTION
+            "Information about ports on a Fibre Channel switch."
+    ::= { fcmgmtGroups 9 }
+
+fcmSwitchLoginGroup OBJECT-GROUP
+    OBJECTS { fcmFLoginPortWwn, fcmFLoginNodeWwn,
+              fcmFLoginBbCreditModel, fcmFLoginBbCredit,
+              fcmFLoginClassesAgreed,
+              fcmFLoginClass2SeqDelivAgreed,
+              fcmFLoginClass2DataFieldSize,
+              fcmFLoginClass3SeqDelivAgreed,
+              fcmFLoginClass3DataFieldSize }
+    STATUS  current
+    DESCRIPTION
+            "Information known to a Fibre Channel switch about
+            attached/logged-in Nx_Ports."
+    ::= { fcmgmtGroups 10 }
+
+fcmLinkBasicGroup OBJECT-GROUP
+    OBJECTS { fcmLinkEnd1NodeWwn , fcmLinkEnd1PhysPortNumber,
+              fcmLinkEnd1PortWwn, fcmLinkEnd2NodeWwn ,
+              fcmLinkEnd2PhysPortNumber, fcmLinkEnd2PortWwn,
+              fcmLinkEnd2AgentAddress, fcmLinkEnd2PortType,
+              fcmLinkEnd2UnitType, fcmLinkEnd2FcAddressId }
+    STATUS  current
+    DESCRIPTION
+            "Information about Fibre Channel links."
+    ::= { fcmgmtGroups 11 }
+
+END
diff --git a/snmp_builder/mibs/FCIP-MGMT-MIB.mib b/snmp_builder/mibs/FCIP-MGMT-MIB.mib
new file mode 100644
index 0000000..424ad1b
--- /dev/null
+++ b/snmp_builder/mibs/FCIP-MGMT-MIB.mib
@@ -0,0 +1,1037 @@
+FCIP-MGMT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE,
+    MODULE-IDENTITY,
+    Unsigned32,
+    Counter32,
+    mib-2               FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION,
+    TruthValue, RowStatus, TimeStamp  FROM SNMPv2-TC
+    InetAddressType,
+    InetAddress,
+    InetPortNumber FROM INET-ADDRESS-MIB
+    FcNameIdOrZero FROM FC-MGMT-MIB
+    InterfaceIndex FROM IF-MIB
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP FROM SNMPv2-CONF
+    SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
+
+fcipMIB MODULE-IDENTITY
+    LAST-UPDATED "200602060000Z"
+    ORGANIZATION "IETF IPFC Working Group"
+    CONTACT-INFO "Anil Rijhsinghani
+                  Accton Technology Corporation
+                  5 Mount Royal Ave
+                  Marlboro, MA 01752 USA.
+
+                  Ravi Natarajan
+                  F5 Networks
+                  2460 North First Street, Suite 100
+                  San Jose, CA 95131 USA."
+    DESCRIPTION
+        "The module defines management information specific to
+         FCIP devices.
+
+         Copyright(C) The Internet Society (2006).  This version
+         of this MIB module is part of RFC 4404; see the RFC
+         itself for full legal notices."
+    REVISION        "200602060000Z"
+    DESCRIPTION
+        "Initial version of this module, published as RFC 4404."
+    ::= { mib-2 224 }
+
+fcipObjects       OBJECT IDENTIFIER ::= { fcipMIB 1 }
+fcipConformance   OBJECT IDENTIFIER ::= { fcipMIB 2 }
+fcipConfig        OBJECT IDENTIFIER ::= { fcipObjects 1 }
+
+-- ******************************************************************
+-- Textual conventions
+--
+
+FcipDomainIdInOctetForm ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+        "The Domain ID of a FC entity in octet form
+         to support the concatenation(000000h||Domain_ID)
+         format defined in the FSPF routing protocol."
+    REFERENCE
+        "FC-SW-3 section 4.8"
+    SYNTAX    OCTET STRING (SIZE(1))
+
+FcipEntityMode ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "The type of port mode provided by an FCIP Entity
+         for an FCIP Link.  An FCIP Entity can be an E-Port
+         mode for one of its FCIP Link Endpoints or a B-Port
+         mode for another of its FCIP Link Endpoints."
+    REFERENCE
+        "FC-BB, rev 4.7, 2 May 1997, section 3."
+    SYNTAX INTEGER {
+                ePortMode(1),
+                bPortMode(2)
+                   }
+
+FcipEntityId  ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "The FCIP entity identifier as defined in RFC 3821."
+    REFERENCE
+        "RFC 3821, Section 7.1, FCIP Special Frame Format"
+    SYNTAX OCTET STRING (SIZE(8))
+
+-- ******************************************************************
+-- The FCIP group
+--
+-- This group defines the global scalar objects applicable to FCIP
+-- devices only
+--
+
+fcipDynIpConfType   OBJECT-TYPE
+    SYNTAX INTEGER {
+                slpv2(1),
+                none(2)
+    }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The type of discovery protocol used to discover remote
+         FCIP entities.  The value of this object is persistent
+         across system restarts."
+    ::= { fcipConfig 1 }
+
+fcipDeviceWWN   OBJECT-TYPE
+    SYNTAX FcNameIdOrZero
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The World Wide Name of this FCIP device."
+    ::= { fcipConfig 2 }
+
+fcipEntitySACKOption   OBJECT-TYPE
+    SYNTAX INTEGER {
+                enabled(1),
+                disabled(2)
+    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Indication of whether the TCP Selective Acknowledgement
+         Option is enabled at this FCIP device to let the receiver
+         acknowledge multiple lost packets in a single ACK for faster
+
+         recovery."
+    REFERENCE
+        "The Selective Ack option is defined in RFC 2883."
+    ::= { fcipConfig 3 }
+
+-- ******************************************************************
+-- The FCIP Entity Table
+--
+
+fcipEntityInstanceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipEntityInstanceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Information about this FCIP device's existing instances of
+         FCIP entities."
+    REFERENCE
+        "RFC 3821, Section 5.4, FCIP Entity"
+    ::= { fcipConfig 4 }
+
+fcipEntityInstanceEntry OBJECT-TYPE
+    SYNTAX FcipEntityInstanceEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP entity table with information
+         about a particular FCIP entity.  Once a row has been
+         created, it is non-volatile across agent restarts until it
+         is deleted."
+    INDEX { fcipEntityId }
+    ::= { fcipEntityInstanceTable 1 }
+
+FcipEntityInstanceEntry ::=
+    SEQUENCE {
+                fcipEntityId                  FcipEntityId,
+                fcipEntityName                SnmpAdminString,
+                fcipEntityAddressType         InetAddressType,
+                fcipEntityAddress             InetAddress,
+                fcipEntityTcpConnPort         InetPortNumber,
+                fcipEntitySeqNumWrap          TruthValue,
+                fcipEntityPHBSupport          TruthValue,
+                fcipEntityStatus              RowStatus
+           }
+
+fcipEntityId   OBJECT-TYPE
+    SYNTAX FcipEntityId
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The FCIP entity identifier."
+    REFERENCE
+        "RFC 3821, Section 7.1, FCIP Special Frame Format"
+    ::= { fcipEntityInstanceEntry 1 }
+
+fcipEntityName   OBJECT-TYPE
+    SYNTAX SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "An administratively-assigned name for this FCIP entity."
+    ::= { fcipEntityInstanceEntry 2 }
+
+fcipEntityAddressType   OBJECT-TYPE
+    SYNTAX InetAddressType
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The type of Internet address by which the entity is
+         reachable.  Only address types IPv4 and IPv6 are supported."
+    ::= { fcipEntityInstanceEntry 3 }
+
+fcipEntityAddress   OBJECT-TYPE
+    SYNTAX InetAddress
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The Internet address for the entity, if configured.  The
+         format of this address is determined by the value of the
+         fcipEntityAddressType object."
+    ::= { fcipEntityInstanceEntry 4 }
+
+fcipEntityTcpConnPort   OBJECT-TYPE
+    SYNTAX InetPortNumber
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "A TCP port other than the FCIP Well-Known port on which the
+         FCIP entity listens for new TCP connection requests.  It
+         contains the value zero(0) if the FCIP Entity only listens
+         on the Well-Known port."
+    DEFVAL  { 0 }
+    ::= { fcipEntityInstanceEntry 5 }
+
+fcipEntitySeqNumWrap   OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An indication of whether the FCIP Entity supports protection
+         against sequence number wrap."
+    REFERENCE
+        "The PAWS option is defined in RFC 1323."
+    ::= { fcipEntityInstanceEntry 6 }
+
+fcipEntityPHBSupport   OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An indication of whether the FCIP Entity supports PHB IP
+         quality of service (QoS)."
+    REFERENCE
+        "Per hop behavior is defined in RFC 2474, definition of the
+         Differentiated Services Field."
+    ::= { fcipEntityInstanceEntry 7 }
+
+fcipEntityStatus   OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+        "This object specifies the operational status of the row.
+
+         When a management station sets the status to active(1), then
+         the values for the objects fcipEntityName,
+         fcipEntityAddressType, and fcipEntityAddress should be
+         supplied as part of the set request.  The values of the
+         objects fcipEntityName, fcipEntityAddressType, and
+         fcipEntityAddress can be changed if the row status is in
+         active state.  The object fcipEntityTcpConnPort takes the
+         default value zero(0), if no value is supplied at the time
+         of row creation.
+
+         Setting the status to destroy(6) deletes the specified FCIP
+         entity instance row from the table.  It also deletes all the
+         rows corresponding to the specified FCIP entity from the
+         fcipLinkTable and fcipTcpConnTable tables."
+    ::= { fcipEntityInstanceEntry 8 }
+
+-- ******************************************************************
+-- The FCIP Link Table
+--
+
+fcipLinkTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipLinkEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Information about FCIP links that exist on this device."
+    ::= { fcipConfig 5 }
+
+fcipLinkEntry OBJECT-TYPE
+    SYNTAX FcipLinkEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP link table containing
+         information about a particular FCIP link.  The values of the
+         read-create objects in this table are persistent across
+         system restarts."
+    INDEX { fcipEntityId, fcipLinkIndex }
+    ::= { fcipLinkTable 1 }
+
+FcipLinkEntry ::=
+    SEQUENCE {
+                fcipLinkIndex                       Unsigned32,
+                fcipLinkIfIndex                     InterfaceIndex,
+                fcipLinkCost                        Unsigned32,
+                fcipLinkLocalFcipEntityMode         FcipEntityMode,
+                fcipLinkLocalFcipEntityAddressType  InetAddressType,
+                fcipLinkLocalFcipEntityAddress      InetAddress,
+                fcipLinkRemFcipEntityWWN            FcNameIdOrZero,
+                fcipLinkRemFcipEntityId             FcipEntityId,
+                fcipLinkRemFcipEntityAddressType    InetAddressType,
+                fcipLinkRemFcipEntityAddress        InetAddress,
+                fcipLinkStatus                      RowStatus,
+                fcipLinkCreateTime                  TimeStamp
+}
+
+fcipLinkIndex     OBJECT-TYPE
+    SYNTAX Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An arbitrary integer that uniquely identifies one FCIP link
+         within an FCIP entity."
+    ::= { fcipLinkEntry 1 }
+
+fcipLinkIfIndex     OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The ifIndex value of the virtual interface corresponding to
+         the FCIP Link running over TCP/IP."
+    ::= { fcipLinkEntry 2 }
+
+fcipLinkCost     OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The FSPF cost associated with this FCIP Link."
+    DEFVAL  { 0 }
+    ::= { fcipLinkEntry 3 }
+
+fcipLinkLocalFcipEntityMode   OBJECT-TYPE
+    SYNTAX FcipEntityMode
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+        "The mode of the local end of the FCIP link."
+    ::= { fcipLinkEntry 4 }
+
+fcipLinkLocalFcipEntityAddressType   OBJECT-TYPE
+    SYNTAX InetAddressType
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The type of Internet address contained in the corresponding
+         instance of fcipLinkLocalFcipEntityAddress.  Only address
+         types IPv4 and IPv6 are supported."
+    ::= { fcipLinkEntry 5 }
+
+fcipLinkLocalFcipEntityAddress   OBJECT-TYPE
+    SYNTAX InetAddress
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The Internet address for the local end of this FCIP Link.
+         The format of this object is determined by the value of the
+         fcipLinkLocalFcipEntityAddressType object."
+    ::= { fcipLinkEntry 6 }
+
+fcipLinkRemFcipEntityWWN   OBJECT-TYPE
+    SYNTAX FcNameIdOrZero
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The World Wide Name of the remote FC Fabric Entity."
+    REFERENCE
+        "RFC 3821, Section 7.1, FCIP Special Frame Format"
+    ::= { fcipLinkEntry 7 }
+
+fcipLinkRemFcipEntityId   OBJECT-TYPE
+    SYNTAX FcipEntityId
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The remote FCIP entity's identifier."
+    REFERENCE
+        "RFC 3821, Section 7.1, FCIP Special Frame Format"
+    ::= { fcipLinkEntry 8 }
+
+fcipLinkRemFcipEntityAddressType   OBJECT-TYPE
+    SYNTAX InetAddressType
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The type of Internet address contained in the corresponding
+         instance of fcipLinkRemFcipEntityAddress.  Only address
+         types IPv4 and IPv6 are supported."
+    ::= { fcipLinkEntry 9 }
+
+fcipLinkRemFcipEntityAddress   OBJECT-TYPE
+    SYNTAX InetAddress
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The Internet address for the remote end of this FCIP Link.
+         The format of this object is determined by the value of the
+         fcipLinkRemFcipEntityAddressType object."
+    ::= { fcipLinkEntry 10 }
+
+fcipLinkStatus   OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+        "This object specifies the operational status of the row.
+
+         The values of objects fcipLinkLocalFcipEntityAddressType,
+         fcipLinkLocalFcipEntityAddress, fcipLinkRemFcipEntityWWN,
+         fcipLinkRemFcipEntityId, fcipLinkRemFcipEntityAddressType,
+         and fcipLinkRemFcipEntityAddress can be changed if the row
+         is in active(1) state.  The object fcipLinkCost is set to
+         the value zero(0) if no value is supplied at the time of row
+         creation.
+
+         Setting the status to destroy(6) deletes the specified FCIP
+         link from the table.  It also deletes all rows corresponding
+         to the specified FCIP link from the fcipTcpConnTable table."
+    ::= { fcipLinkEntry 11 }
+
+fcipLinkCreateTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last created."
+    ::= { fcipLinkEntry 12 }
+
+-- ******************************************************************
+-- The TCP Connection Table
+--
+
+fcipTcpConnTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipTcpConnEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Information about existing TCP connections.  Each FCIP link
+         within an FCIP entity manages one or more TCP connections.
+         The FCIP entity employs a Data Engine for each TCP
+         connection for handling FC frame encapsulation,
+         de-encapsulation, and transmission of FCIP frames on the
+         connection."
+    ::= { fcipConfig 6 }
+
+fcipTcpConnEntry OBJECT-TYPE
+    SYNTAX FcipTcpConnEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP TCP Connection table containing
+         information about a particular TCP connection."
+    INDEX { fcipEntityId,
+            fcipLinkIndex,
+            fcipTcpConnLocalPort,
+            fcipTcpConnRemPort}
+    ::= { fcipTcpConnTable 1 }
+
+FcipTcpConnEntry ::=
+    SEQUENCE {
+                fcipTcpConnLocalPort      InetPortNumber,
+                fcipTcpConnRemPort        InetPortNumber,
+                fcipTcpConnRWSize         Unsigned32,
+                fcipTcpConnMSS            Unsigned32
+}
+
+fcipTcpConnLocalPort     OBJECT-TYPE
+    SYNTAX InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The local port number for this TCP connection."
+    ::= { fcipTcpConnEntry 1 }
+
+fcipTcpConnRemPort     OBJECT-TYPE
+    SYNTAX InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The remote port number for this TCP connection."
+    ::= { fcipTcpConnEntry 2 }
+
+fcipTcpConnRWSize     OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The default maximum TCP Receiver Window size for this TCP
+         connection."
+    ::= { fcipTcpConnEntry 3 }
+
+fcipTcpConnMSS     OBJECT-TYPE
+    SYNTAX Unsigned32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The TCP Maximum Segment Size (MSS) for this TCP connection."
+    ::= { fcipTcpConnEntry 4 }
+
+-- ******************************************************************
+-- The Dynamic Route Table
+--
+
+fcipDynamicRouteTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipDynamicRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Information about dynamically discovered routing
+         information.  The FCIP device may use the SLPv2 protocol in
+         conjunction with other protocols (say, FSPF) for dynamically
+         discovering other FCIP entities and may populate this table
+         with FCIP link information for each Destination Address
+         Identifier."
+    ::= { fcipConfig 7 }
+
+fcipDynamicRouteEntry OBJECT-TYPE
+    SYNTAX FcipDynamicRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP Dynamic Route Table containing
+         information about a particular FCIP route."
+    INDEX { fcipEntityId, fcipDynamicRouteDID }
+    ::= { fcipDynamicRouteTable 1 }
+
+FcipDynamicRouteEntry ::=
+    SEQUENCE {
+                fcipDynamicRouteDID          FcipDomainIdInOctetForm,
+                fcipDynamicRouteLinkIndex    Unsigned32
+            }
+
+fcipDynamicRouteDID    OBJECT-TYPE
+    SYNTAX FcipDomainIdInOctetForm
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "8-bit ID of a Fibre Channel Domain that is reachable from
+         this FCIP device."
+    ::= { fcipDynamicRouteEntry  1 }
+
+fcipDynamicRouteLinkIndex    OBJECT-TYPE
+    SYNTAX Unsigned32 (1..4294967295)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The FCIP Link used to reach the domain specified by the
+
+         corresponding instance of fcipDynamicRouteDID.  The link
+         identified by a value of this object is the same FCIP link
+         as identified by the same value of fcipLinkIndex for the
+         same FCIP entity."
+    ::= { fcipDynamicRouteEntry  2 }
+
+-- ******************************************************************
+-- The Static Route Table
+--
+
+fcipStaticRouteTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipStaticRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Information about static route entries configured by the
+         Network Admin.  In the absence of dynamic discovery of
+         remote FCIP entities, the Network Manager will figure out
+         all remote FCIP devices that are reachable from this device
+         and populate this table with FCIP link information for each
+         Domain ID.  At any time, both static and dynamic routing
+         can be active, and an entry in the static route table for a
+         given DID takes precedence over the entry in the dynamic
+         route table for the same Domain ID."
+    ::= { fcipConfig 8 }
+
+fcipStaticRouteEntry OBJECT-TYPE
+    SYNTAX FcipStaticRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP Static Route Table containing
+         information about a particular FCIP route.  The values of
+         the read-create objects in this table are persistent across
+         system restarts."
+    INDEX { fcipEntityId, fcipStaticRouteDID }
+    ::= { fcipStaticRouteTable 1 }
+
+FcipStaticRouteEntry ::=
+    SEQUENCE {
+                fcipStaticRouteDID           FcipDomainIdInOctetForm,
+                fcipStaticRouteLinkIndex     Unsigned32,
+                fcipStaticRouteStatus        RowStatus
+            }
+
+fcipStaticRouteDID    OBJECT-TYPE
+    SYNTAX FcipDomainIdInOctetForm
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "8-bit ID of a Fibre Channel Domain that is reachable from
+         this FCIP device."
+    ::= { fcipStaticRouteEntry  1 }
+
+fcipStaticRouteLinkIndex    OBJECT-TYPE
+    SYNTAX Unsigned32 (1..4294967295)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The FCIP Link used to reach the domain specified by the
+         corresponding instance of fcipStaticRouteDID.  The link
+         identified by a value of this object is the same FCIP link
+         as identified by the same value of fcipLinkIndex for the
+         same FCIP entity."
+    ::= { fcipStaticRouteEntry  2 }
+
+fcipStaticRouteStatus   OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+        "This object specifies the operational status of the row.
+
+         When a management station sets the status to active(1),
+         the values for the object fcipStaticRouteLinkIndex should be
+         supplied as part of the set request.
+
+         Setting the status to destroy(6) deletes the specified FCIP
+         static route entry from the table."
+    ::= { fcipStaticRouteEntry  3 }
+
+-- ******************************************************************
+-- The FCIP Discovery Domain Table
+--
+
+fcipDiscoveryDomainTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipDiscoveryDomainEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Information about FCIP Discovery Domains.  Each FCIP
+         Discovery Domain is associated with one or more FCIP
+         entities."
+    ::= { fcipConfig 9 }
+
+fcipDiscoveryDomainEntry OBJECT-TYPE
+    SYNTAX FcipDiscoveryDomainEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP Discovery Domain Table
+         containing information about a particular FCIP Discovery
+         Domain that is associated with one or more FCIP entities.
+         The values of the read-write object fcipDiscoveryDomainName
+         are persistent across system restarts."
+    INDEX { fcipEntityId, fcipDiscoveryDomainIndex }
+    ::= { fcipDiscoveryDomainTable 1 }
+
+FcipDiscoveryDomainEntry ::=
+    SEQUENCE {
+        fcipDiscoveryDomainIndex        Unsigned32,
+        fcipDiscoveryDomainName         SnmpAdminString
+    }
+
+fcipDiscoveryDomainIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An integer that uniquely identifies an FCIP Discovery Domain
+         associated with this FCIP entity."
+    ::= { fcipDiscoveryDomainEntry 1 }
+
+fcipDiscoveryDomainName   OBJECT-TYPE
+    SYNTAX SnmpAdminString (SIZE (0..128))
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The name of this FCIP Discovery Domain."
+    REFERENCE
+        "RFC 3822, Section 4.1.1, FCIP Discovery Domains"
+    ::= { fcipDiscoveryDomainEntry 2 }
+
+-- ******************************************************************
+-- The FCIP Link Errors
+--
+
+fcipLinkErrorsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FcipLinkErrorsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of error counters for FCIP Links.  Each counter
+         records the number of times a particular error happened that
+         caused a TCP connection to close down."
+    REFERENCE
+        "RFC 3821, Section 5.2, FCIP Link"
+    ::= { fcipConfig 10 }
+
+fcipLinkErrorsEntry OBJECT-TYPE
+    SYNTAX FcipLinkErrorsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A conceptual row of the FCIP Link Errors Table containing
+         error counters for an FCIP Link."
+    INDEX { fcipEntityId, fcipLinkIndex }
+    ::= { fcipLinkErrorsTable 1 }
+
+FcipLinkErrorsEntry ::=
+    SEQUENCE {
+        fcipLinkFcipLossofFcSynchs            Counter32,
+        fcipLinkFcipEncapErrors               Counter32,
+        fcipLinkFcipNotReceivedSfResps        Counter32,
+        fcipLinkFcipSfRespMismatches          Counter32,
+        fcipLinkFcipSfInvalidNonces           Counter32,
+        fcipLinkFcipReceivedSfDuplicates      Counter32,
+        fcipLinkFcipSfInvalidWWNs             Counter32,
+        fcipLinkFcipBB2LkaTimeOuts            Counter32,
+        fcipLinkFcipSntpExpiredTimeStamps     Counter32,
+        fcipLinkTcpTooManyErrors              Counter32,
+        fcipLinkTcpExcessiveDroppedDatagrams  Counter32,
+        fcipLinkTcpSaParamMismatches          Counter32
+    }
+
+fcipLinkFcipLossofFcSynchs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times FC synchronization was lost on this FCIP
+
+         Link.  The last discontinuity of this counter is indicated
+         by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 1 }
+
+fcipLinkFcipEncapErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of FCIP frames received with encapsulation errors
+         such as improper header, format, or length.  The last
+         discontinuity of this counter is indicated by
+         fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 2 }
+
+fcipLinkFcipNotReceivedSfResps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an FCIP Special Frame Response was
+         expected but not received on this FCIP Link.  The last
+         discontinuity of this counter is indicated by
+         fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 3 }
+
+fcipLinkFcipSfRespMismatches OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times FCIP Special Frame Bytes mismatch
+         happened on this FCIP Link.  The last discontinuity of this
+         counter is indicated by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 4 }
+
+fcipLinkFcipSfInvalidNonces OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times FCIP Special Frame Invalid Connection
+         Nonce happened on this FCIP Link.  The last discontinuity
+         of this counter is indicated by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 5 }
+
+fcipLinkFcipReceivedSfDuplicates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times duplicate FCIP Special Frames were
+         received on this FCIP Link.  The last discontinuity of this
+         counter is indicated by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 6 }
+
+fcipLinkFcipSfInvalidWWNs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times FCIP Special Frames with invalid
+         destination FC Fabric Entity WWN were received on this FCIP
+         Link.  The last discontinuity of this counter is indicated
+         by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 7 }
+
+fcipLinkFcipBB2LkaTimeOuts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of FC Keep Alive Time-outs that occurred on
+         this FCIP Link.  The last discontinuity of this counter
+         is indicated by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 8 }
+
+fcipLinkFcipSntpExpiredTimeStamps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of frames discarded due to an expired Simple
+         Network Time Protocol (SNTP) timestamp on this FCIP Link.
+         The last discontinuity of this counter is indicated by
+         fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 9 }
+
+fcipLinkTcpTooManyErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of TCP connections that closed down on this
+         FCIP Link due to too many errors on the connection.  The
+         last discontinuity of this counter is indicated by
+
+         fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 10  }
+
+fcipLinkTcpExcessiveDroppedDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of TCP connections that closed down on this
+         FCIP Link due to an excessive number of dropped FCIP
+         packets.  The last discontinuity of this counter is
+         indicated by fcipLinkCreateTime."
+    ::= { fcipLinkErrorsEntry 11  }
+
+fcipLinkTcpSaParamMismatches OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times TCP connections with Security
+         Association parameter mismatches were closed down on this
+         FCIP Link.  The last discontinuity of this counter is
+         indicated by fcipLinkCreateTime."
+    REFERENCE
+        "RFC 3821, Section 9.4.2, TCP Connection Security
+         Associations (SAs)"
+    ::= { fcipLinkErrorsEntry 12  }
+
+-- ******************************************************************
+-- Conformance Statements
+--
+
+fcipCompliances   OBJECT IDENTIFIER ::= { fcipConformance 1 }
+fcipGroups        OBJECT IDENTIFIER ::= { fcipConformance 2 }
+
+fcipCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "Compliance statement for FCIP MIB."
+    MODULE       -- this module
+        MANDATORY-GROUPS {
+            fcipEntityScalarGroup,
+            fcipEntityInstanceGroup,
+            fcipLinkGroup,
+            fcipTcpConnGroup,
+            fcipDiscoveryDomainGroup,
+            fcipLinkErrorsGroup
+
+        }
+
+        GROUP   fcipDynamicRouteGroup
+        DESCRIPTION
+            "This group is mandatory only for systems that do not
+             have these objects in any other FC MIB.  It may be
+             implemented even in that case for convenience."
+
+        GROUP   fcipStaticRouteGroup
+        DESCRIPTION
+            "This group is mandatory only for systems that do not
+             have these objects in any other FC MIB.  It may be
+             implemented even in that case for convenience."
+
+       OBJECT   fcipEntityAddressType
+       SYNTAX   INTEGER { ipv4(1), ipv6(2) }
+       DESCRIPTION
+           "Only IPv4 and IPv6 address types need to be supported for
+            addressing FCIP entities."
+
+       OBJECT   fcipEntityAddress
+       SYNTAX   InetAddress (SIZE(4|16))
+       DESCRIPTION
+           "Size of FCIP entity's IP address depends on address type.
+            FCIP entity address size is four if the IP address is
+            IPv4 and sixteen if the IP address type is IPv6."
+
+       OBJECT   fcipLinkLocalFcipEntityAddressType
+       SYNTAX   INTEGER { ipv4(1), ipv6(2) }
+       DESCRIPTION
+           "Only IPv4 and IPv6 address types need to be supported for
+            addressing the local FCIP entities."
+
+       OBJECT   fcipLinkLocalFcipEntityAddress
+       SYNTAX   InetAddress (SIZE(4|16))
+       DESCRIPTION
+           "Size of FCIP entity's IP address depends on address type.
+            FCIP entity address size is four if the IP address is
+            IPv4 and sixteen if the IP address type is IPv6."
+
+       OBJECT   fcipLinkRemFcipEntityAddressType
+       SYNTAX   INTEGER { ipv4(1), ipv6(2) }
+       DESCRIPTION
+           "Only IPv4 and IPv6 address types need to be supported for
+            addressing the remote FCIP entities."
+
+       OBJECT   fcipLinkRemFcipEntityAddress
+       SYNTAX   InetAddress (SIZE(4|16))
+       DESCRIPTION
+           "Size of FCIP entity's IP address depends on the address
+            type.  FCIP entity address size is four if the IP address
+            is IPv4 and sixteen if the IP address type is IPv6."
+    ::= { fcipCompliances 1 }
+
+fcipEntityScalarGroup OBJECT-GROUP
+    OBJECTS {   fcipDynIpConfType,
+                fcipDeviceWWN,
+                fcipEntitySACKOption
+    }
+    STATUS current
+    DESCRIPTION
+        "Collection of scalar objects applicable to all FCIP
+         instances."
+::= { fcipGroups 1 }
+
+fcipEntityInstanceGroup OBJECT-GROUP
+    OBJECTS {
+                fcipEntityName,
+                fcipEntityAddressType,
+                fcipEntityAddress,
+                fcipEntityTcpConnPort,
+                fcipEntitySeqNumWrap,
+                fcipEntityPHBSupport,
+                fcipEntityStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         instances."
+::= { fcipGroups 2 }
+
+fcipLinkGroup OBJECT-GROUP
+    OBJECTS {
+                fcipLinkIfIndex,
+                fcipLinkCost,
+                fcipLinkLocalFcipEntityMode,
+                fcipLinkLocalFcipEntityAddressType,
+                fcipLinkLocalFcipEntityAddress,
+                fcipLinkRemFcipEntityWWN,
+                fcipLinkRemFcipEntityId,
+                fcipLinkRemFcipEntityAddressType,
+                fcipLinkRemFcipEntityAddress,
+                fcipLinkStatus,
+                fcipLinkCreateTime
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         Links."
+::= { fcipGroups 3 }
+
+fcipTcpConnGroup OBJECT-GROUP
+    OBJECTS {
+                fcipTcpConnRWSize,
+                fcipTcpConnMSS
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         TCP connections."
+::= { fcipGroups 4 }
+
+fcipDiscoveryDomainGroup OBJECT-GROUP
+    OBJECTS {
+                fcipDiscoveryDomainName
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         Discovery Domains."
+::= { fcipGroups 5 }
+
+fcipLinkErrorsGroup OBJECT-GROUP
+    OBJECTS {
+        fcipLinkFcipLossofFcSynchs,
+        fcipLinkFcipEncapErrors,
+        fcipLinkFcipNotReceivedSfResps,
+        fcipLinkFcipSfRespMismatches,
+        fcipLinkFcipSfInvalidNonces,
+        fcipLinkFcipReceivedSfDuplicates,
+        fcipLinkFcipSfInvalidWWNs,
+        fcipLinkFcipBB2LkaTimeOuts,
+        fcipLinkFcipSntpExpiredTimeStamps,
+        fcipLinkTcpTooManyErrors,
+        fcipLinkTcpExcessiveDroppedDatagrams,
+        fcipLinkTcpSaParamMismatches
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         link errors."
+::= { fcipGroups 6 }
+
+fcipDynamicRouteGroup OBJECT-GROUP
+    OBJECTS {
+                fcipDynamicRouteLinkIndex
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         dynamic routes."
+::= { fcipGroups 7 }
+
+fcipStaticRouteGroup OBJECT-GROUP
+    OBJECTS {
+                fcipStaticRouteLinkIndex,
+                fcipStaticRouteStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about FCIP
+         static routes."
+::= { fcipGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/FDDI-SMT73-MIB.mib b/snmp_builder/mibs/FDDI-SMT73-MIB.mib
new file mode 100644
index 0000000..971d286
--- /dev/null
+++ b/snmp_builder/mibs/FDDI-SMT73-MIB.mib
@@ -0,0 +1,2128 @@
+FDDI-SMT73-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        Counter
+            FROM RFC1155-SMI
+	transmission
+	    FROM RFC1213-MIB
+        OBJECT-TYPE
+            FROM RFC-1212;
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in [7].
+
+-- this is the FDDI MIB module
+
+fddi    OBJECT IDENTIFIER ::= { transmission 15 }
+fddimib   OBJECT IDENTIFIER ::= { fddi 73 }
+
+-- textual conventions
+
+FddiTimeNano ::= INTEGER (0..2147483647)
+-- This data type specifies 1 nanosecond units as
+-- an integer value.
+--
+-- NOTE: The encoding is normal integer representation, not
+-- two's complement.  Since this type is used for variables
+-- which are encoded as TimerTwosComplement in the ANSI
+-- specification, two operations need to be performed on such
+-- variables to convert from ANSI form to SNMP form:
+--
+-- 1) Convert from two's complement to normal integer
+--    representation
+-- 2) Multiply by 80 to convert from 80 nsec to 1 nsec units
+--
+-- No resolution is lost.  Moreover, the objects for which
+-- this data type is used effectively do not lose any range
+-- due to the lower maximum value since they do not require
+-- the full range.
+--
+-- Example: If fddimibMACTReq had a value of 8 ms, it would
+-- be stored in ANSI TimerTwosComplement format as 0xFFFE7960
+-- [8 ms is 100000 in 80 nsec units, which is then converted
+-- to two's complement] but be reported as 8000000 in SNMP
+-- since it is encoded here as FddiTimeNano.
+
+FddiTimeMilli ::= INTEGER (0..2147483647)
+-- This data type is used for some FDDI timers. It specifies
+-- time in 1 millisecond units, in normal integer
+-- representation.
+
+FddiResourceId ::= INTEGER (0..65535)
+-- This data type is used to refer to an instance of a  MAC,
+-- PORT, or PATH Resource ID.  Indexing begins
+-- at 1.  Zero is used to indicate the absence of a resource.
+
+FddiSMTStationIdType ::= OCTET STRING (SIZE (8))
+-- The unique identifier for the FDDI station.  This is a
+-- string of 8 octets, represented as X' yy yy xx xx xx xx
+-- xx xx' with the low order 6 octet (xx) from a unique IEEE
+-- assigned address.  The high order two bits of the IEEE
+-- address, the group address bit and the administration bit
+-- (Universal/Local) bit should both be zero.  The first two
+-- octets, the yy octets, are implementor-defined.
+--
+-- The representation of the address portion of the station id
+-- is in the IEEE (ANSI/IEEE P802.1A) canonical notation for
+-- 48 bit addresses.  The canonical form is a 6-octet string
+-- where the first octet contains the first 8 bits of the
+-- address, with the I/G(Individual/Group) address bit as the
+-- least significant bit and the  U/L (Universal/Local) bit
+-- as the next more significant bit, and so on.  Note that
+-- addresses in the ANSI FDDI standard SMT frames are
+-- represented in FDDI MAC order.
+
+FddiMACLongAddressType ::= OCTET STRING (SIZE (6))
+-- The representation of long MAC addresses as management
+-- values is in the IEEE (ANSI/IEEE P802.1A) canonical
+-- notation for 48 bit addresses.  The canonical form is a
+-- 6-octet string where the first octet contains the first 8
+-- bits of the address, with the I/G (Individual/Group)
+-- address bit as the least significant bit and the  U/L
+-- (Universal/Local) bit as the next more significant bit,
+-- and so on.  Note that the addresses in the SMT frames are
+-- represented in FDDI MAC order.
+
+-- groups in the FDDI MIB module
+
+fddimibSMT          OBJECT IDENTIFIER ::= { fddimib 1 }
+
+fddimibMAC          OBJECT IDENTIFIER ::= { fddimib 2 }
+
+fddimibMACCounters  OBJECT IDENTIFIER ::= { fddimib 3 }
+
+fddimibPATH         OBJECT IDENTIFIER ::= { fddimib 4 }
+
+fddimibPORT         OBJECT IDENTIFIER ::= { fddimib 5 }
+
+-- the SMT group
+-- Implementation of the SMT group is mandatory for all
+-- systems which implement manageable FDDI subsystems.
+
+fddimibSMTNumber OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of SMT implementations (regardless of
+            their current state) on this network management
+            application entity.  The value for this variable
+            must remain constant at least from one re-
+            initialization of the entity's network management
+            system to the next re-initialization."
+    ::= { fddimibSMT  1 }
+
+-- the SMT table
+
+fddimibSMTTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FddimibSMTEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of SMT entries.  The number of entries
+            shall not exceed the value of fddimibSMTNumber."
+    ::= { fddimibSMT  2 }
+
+fddimibSMTEntry OBJECT-TYPE
+    SYNTAX  FddimibSMTEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "An SMT entry containing information common to a
+            given SMT."
+    INDEX   { fddimibSMTIndex }
+    ::= { fddimibSMTTable 1 }
+
+FddimibSMTEntry ::=
+    SEQUENCE {
+        fddimibSMTIndex
+            INTEGER,
+        fddimibSMTStationId
+            FddiSMTStationIdType,
+        fddimibSMTOpVersionId
+            INTEGER,
+        fddimibSMTHiVersionId
+            INTEGER,
+        fddimibSMTLoVersionId
+            INTEGER,
+        fddimibSMTUserData
+            OCTET STRING,
+        fddimibSMTMIBVersionId
+            INTEGER,
+        fddimibSMTMACCts
+            INTEGER,
+        fddimibSMTNonMasterCts
+            INTEGER,
+        fddimibSMTMasterCts
+            INTEGER,
+        fddimibSMTAvailablePaths
+            INTEGER,
+        fddimibSMTConfigCapabilities
+            INTEGER,
+        fddimibSMTConfigPolicy
+            INTEGER,
+        fddimibSMTConnectionPolicy
+            INTEGER,
+        fddimibSMTTNotify
+            INTEGER,
+        fddimibSMTStatRptPolicy
+            INTEGER,
+        fddimibSMTTraceMaxExpiration
+            FddiTimeMilli,
+        fddimibSMTBypassPresent
+            INTEGER,
+        fddimibSMTECMState
+            INTEGER,
+        fddimibSMTCFState
+            INTEGER,
+        fddimibSMTRemoteDisconnectFlag
+            INTEGER,
+        fddimibSMTStationStatus
+            INTEGER,
+        fddimibSMTPeerWrapFlag
+            INTEGER,
+        fddimibSMTTimeStamp
+            FddiTimeMilli,
+        fddimibSMTTransitionTimeStamp
+            FddiTimeMilli,
+        fddimibSMTStationAction
+            INTEGER
+    }
+
+fddimibSMTIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A unique value for each SMT.  The value for each
+            SMT must remain constant at least from one re-
+            initialization of the entity's network management
+            system to the next re-initialization."
+    ::= { fddimibSMTEntry 1 }
+
+fddimibSMTStationId OBJECT-TYPE
+    SYNTAX  FddiSMTStationIdType -- OCTET STRING (SIZE (8))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Used to uniquely identify an FDDI station."
+    REFERENCE
+            "ANSI { fddiSMT 11 }"
+    ::= { fddimibSMTEntry 2 }
+
+fddimibSMTOpVersionId OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The version that this station is using for its
+            operation (refer to ANSI 7.1.2.2). The value of
+            this variable is 2 for this SMT revision."
+    REFERENCE
+            "ANSI { fddiSMT 13 }"
+    ::= { fddimibSMTEntry 3 }
+
+fddimibSMTHiVersionId OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The highest version of SMT that this station
+            supports (refer to ANSI 7.1.2.2)."
+    REFERENCE
+            "ANSI { fddiSMT 14 }"
+    ::= { fddimibSMTEntry 4 }
+
+fddimibSMTLoVersionId OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The lowest version of SMT that this station
+            supports (refer to ANSI 7.1.2.2)."
+    REFERENCE
+            "ANSI { fddiSMT 15 }"
+    ::= { fddimibSMTEntry 5 }
+
+fddimibSMTUserData OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (32))
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable contains 32 octets of user defined
+            information. The information shall be an ASCII
+            string."
+    REFERENCE
+            "ANSI { fddiSMT 17 }"
+    ::= { fddimibSMTEntry 6 }
+
+fddimibSMTMIBVersionId OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The version of the FDDI MIB of this station.  The
+            value of this variable is 1 for this SMT
+            revision."
+    REFERENCE
+            "ANSI { fddiSMT 18 }"
+    ::= { fddimibSMTEntry 7 }
+
+fddimibSMTMACCts OBJECT-TYPE
+    SYNTAX  INTEGER (0..255)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of MACs in this station or
+            concentrator."
+    REFERENCE
+            "ANSI { fddiSMT 21 }"
+    ::= { fddimibSMTEntry 8 }
+
+fddimibSMTNonMasterCts OBJECT-TYPE
+    SYNTAX  INTEGER (0..2)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of this variable is the number of A, B,
+            and S ports in this station or concentrator."
+    REFERENCE
+            "ANSI { fddiSMT 22 }"
+    ::= { fddimibSMTEntry 9 }
+
+fddimibSMTMasterCts OBJECT-TYPE
+    SYNTAX  INTEGER (0..255)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of M Ports in a node. If the node is
+            not a concentrator, the value of the variable is
+            zero."
+    REFERENCE
+            "ANSI { fddiSMT 23 }"
+    ::= { fddimibSMTEntry 10 }
+
+fddimibSMTAvailablePaths OBJECT-TYPE
+    SYNTAX  INTEGER (0..7)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A value that indicates the PATH types available
+            in the station.
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each type of PATH that
+            this node has available, 2 raised to a power is
+            added to the sum.  The powers are according to the
+            following table:
+
+                     Path   Power
+                  Primary     0
+                Secondary     1
+                    Local     2
+
+            For example, a station having Primary and Local
+            PATHs available would have a value of 5 (2**0 +
+            2**2)."
+    REFERENCE
+            "ANSI { fddiSMT 24 }"
+    ::= { fddimibSMTEntry 11 }
+
+fddimibSMTConfigCapabilities OBJECT-TYPE
+    SYNTAX  INTEGER (0..3)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A value that indicates the configuration
+            capabilities of a node. The 'Hold Available' bit
+            indicates the support of the optional Hold
+            Function, which is controlled by
+            fddiSMTConfigPolicy.  The 'CF-Wrap-AB' bit
+            indicates that the station has the capability of
+            performing a wrap_ab (refer to ANSI SMT 9.7.2.2).
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each of the configuration
+            policies currently enforced on the node, 2 raised
+            to a power is added to the sum.  The powers are
+            according to the following table:
+
+                       Policy   Power
+                holdAvailable     0
+                   CF-Wrap-AB     1 "
+    REFERENCE
+            "ANSI { fddiSMT 25 }"
+    ::= { fddimibSMTEntry 12 }
+
+fddimibSMTConfigPolicy OBJECT-TYPE
+    SYNTAX  INTEGER (0..1)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A value that indicates the configuration policies
+            currently desired in a node.  'Hold' is one of the
+            terms used for the Hold Flag, an optional ECM flag
+            used to enable the optional Hold policy.
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each of the configuration
+            policies currently enforced on the node, 2 raised
+            to a power is added to the sum.  The powers are
+            according to the following table:
+
+                           Policy   Power
+                configurationhold     0 "
+    REFERENCE
+            "ANSI { fddiSMT 26 }"
+    ::= { fddimibSMTEntry 13 }
+
+fddimibSMTConnectionPolicy OBJECT-TYPE
+    SYNTAX  INTEGER (32768..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A value representing the connection policies in
+            effect in a node. A station sets the corresponding
+            bit for each of the connection types that it
+            rejects. The letter designations, X and Y, in the
+            'rejectX-Y' names have the following significance:
+            X represents the PC-Type of the local PORT and Y
+            represents the PC_Type of the adjacent PORT
+            (PC_Neighbor). The evaluation of Connection-
+            Policy (PC-Type, PC-Neighbor) is done to determine
+            the setting of T- Val(3) in the PC-Signalling
+            sequence (refer to ANSI 9.6.3). Note that Bit 15,
+            (rejectM-M), is always set and cannot be cleared.
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each of the connection
+            policies currently enforced on the node, 2 raised
+            to a power is added to the sum.  The powers are
+            according to the following table:
+
+                   Policy   Power
+                rejectA-A     0
+                rejectA-B     1
+                rejectA-S     2
+                rejectA-M     3
+                rejectB-A     4
+                rejectB-B     5
+                rejectB-S     6
+                rejectB-M     7
+                rejectS-A     8
+                rejectS-B     9
+                rejectS-S     10
+                rejectS-M     11
+                rejectM-A     12
+                rejectM-B     13
+                rejectM-S     14
+                rejectM-M     15 "
+    REFERENCE
+            "ANSI { fddiSMT 27 }"
+    ::= { fddimibSMTEntry 14 }
+
+fddimibSMTTNotify OBJECT-TYPE
+    SYNTAX  INTEGER (2..30)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The timer, expressed in seconds, used in the
+            Neighbor Notification protocol. It has a range of
+            2 seconds to 30 seconds, and its default value is
+            30 seconds (refer to ANSI SMT 8.2)."
+    REFERENCE
+            "ANSI { fddiSMT 29 }"
+    ::= { fddimibSMTEntry 15 }
+
+fddimibSMTStatRptPolicy OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "If true, indicates that the node will generate
+            Status Reporting Frames for its implemented events
+            and conditions. It has an initial value of true.
+            This variable determines the value of the
+            SR_Enable Flag (refer to ANSI SMT 8.3.2.1)."
+    REFERENCE
+            "ANSI { fddiSMT 30 }"
+    ::= { fddimibSMTEntry 16 }
+
+fddimibSMTTraceMaxExpiration OBJECT-TYPE
+    SYNTAX  FddiTimeMilli
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Reference Trace_Max (refer to ANSI SMT
+            9.4.4.2.2)."
+    REFERENCE
+            "ANSI { fddiSMT 31 }"
+    ::= { fddimibSMTEntry 17 }
+
+fddimibSMTBypassPresent OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A flag indicating if the station has a bypass on
+            its AB port pair."
+    REFERENCE
+            "ANSI { fddiSMT 34 }"
+    ::= { fddimibSMTEntry 18 }
+
+fddimibSMTECMState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                ec0(1), -- Out
+
+                ec1(2), -- In
+                ec2(3), -- Trace
+                ec3(4), -- Leave
+                ec4(5), -- Path_Test
+                ec5(6), -- Insert
+                ec6(7), -- Check
+                ec7(8)  -- Deinsert
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the current state of the ECM state
+            machine (refer to ANSI SMT 9.5.2)."
+    REFERENCE
+            "ANSI { fddiSMT 41 }"
+    ::= { fddimibSMTEntry 19 }
+
+fddimibSMTCFState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                cf0(1),   -- isolated
+                cf1(2),   -- local_a
+                cf2(3),   -- local_b
+                cf3(4),   -- local_ab
+                cf4(5),   -- local_s
+                cf5(6),   -- wrap_a
+                cf6(7),   -- wrap_b
+                cf7(8),   -- wrap_ab
+                cf8(9),   -- wrap_s
+                cf9(10),  -- c_wrap_a
+                cf10(11), -- c_wrap_b
+                cf11(12), -- c_wrap_s
+                cf12(13)  -- thru
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The attachment configuration for the station or
+            concentrator (refer to ANSI SMT 9.7.2.2)."
+    REFERENCE
+            "ANSI { fddiSMT 42 }"
+    ::= { fddimibSMTEntry 20 }
+
+fddimibSMTRemoteDisconnectFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A flag indicating that the station was remotely
+
+            disconnected from the network as a result of
+            receiving an fddiSMTAction, disconnect (refer to
+            ANSI SMT 6.4.5.3) in a Parameter Management Frame.
+            A station requires a Connect Action to rejoin and
+            clear the flag (refer to ANSI SMT 6.4.5.2)."
+    REFERENCE
+            "ANSI { fddiSMT 44 }"
+    ::= { fddimibSMTEntry 21 }
+
+fddimibSMTStationStatus OBJECT-TYPE
+    SYNTAX  INTEGER { concatenated(1), separated(2), thru(3) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The current status of the primary and secondary
+            paths within this station."
+    REFERENCE
+            "ANSI { fddiSMT 45 }"
+    ::= { fddimibSMTEntry 22 }
+
+fddimibSMTPeerWrapFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable assumes the value of the
+            PeerWrapFlag in CFM (refer to ANSI SMT
+            9.7.2.4.4)."
+    REFERENCE
+            "ANSI { fddiSMT 46 }"
+    ::= { fddimibSMTEntry 23 }
+
+fddimibSMTTimeStamp OBJECT-TYPE
+    SYNTAX  FddiTimeMilli
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable assumes the value of TimeStamp
+            (refer to ANSI SMT 8.3.2.1)."
+    REFERENCE
+            "ANSI { fddiSMT 51 }"
+    ::= { fddimibSMTEntry 24 }
+
+fddimibSMTTransitionTimeStamp OBJECT-TYPE
+    SYNTAX  FddiTimeMilli
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable assumes the value of
+            TransitionTimeStamp (refer to ANSI SMT 8.3.2.1)."
+    REFERENCE
+            "ANSI { fddiSMT 52 }"
+    ::= { fddimibSMTEntry 25 }
+
+fddimibSMTStationAction OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),               -- none of the following
+                connect(2),
+                disconnect(3),
+                path-Test(4),
+                self-Test(5),
+                disable-a(6),
+                disable-b(7),
+                disable-m(8)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "This object, when read, always returns a value of
+            other(1).  The behavior of setting this variable
+            to each of the acceptable values is as follows:
+
+                 other(1): Results in an appropriate error.
+                 connect(2): Generates a Connect signal to ECM
+                      to begin a connection sequence. See ANSI
+                      Ref 9.4.2.
+                 disconnect(3): Generates a Disconnect signal
+                      to ECM. see ANSI Ref 9.4.2.
+                 path-Test(4): Initiates a station Path_Test.
+                      The Path_Test variable (see ANSI Ref
+                      9.4.1) is set to 'Testing'. The results
+                      of this action are not specified in this
+                      standard.
+                 self-Test(5): Initiates a station Self_Test.
+                      The results of this action are not
+                      specified in this standard.
+                 disable-a(6): Causes a PC_Disable on the A
+                      port if the A port mode is peer.
+                 disable-b(7): Causes a PC_Disable on the B
+                      port if the B port mode is peer.
+                 disable-m(8): Causes a PC_Disable on all M
+                      ports.
+
+            Attempts to set this object to all other values
+            results in an appropriate error.  The result of
+            setting this variable to path-Test(4) or self-
+
+            Test(5) is implementation-specific."
+    REFERENCE
+            "ANSI { fddiSMT 60 }"
+    ::= { fddimibSMTEntry 26 }
+
+-- the MAC group
+-- Implementation of the MAC Group is mandatory for all
+-- systems which implement manageable FDDI subsystems.
+
+fddimibMACNumber OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of MAC implementations (across
+            all SMTs) on this network management application
+            entity.  The value for this variable must remain
+            constant at least from one re-initialization of
+            the entity's network management system to the next
+            re-initialization."
+    ::= { fddimibMAC  1 }
+
+-- the MAC table
+
+fddimibMACTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FddimibMACEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of MAC entries.  The number of entries
+            shall not exceed the value of fddimibMACNumber."
+    ::= { fddimibMAC  2 }
+
+fddimibMACEntry OBJECT-TYPE
+    SYNTAX  FddimibMACEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A MAC entry containing information common to a
+            given MAC."
+    INDEX   { fddimibMACSMTIndex, fddimibMACIndex }
+    ::= { fddimibMACTable 1 }
+
+FddimibMACEntry ::=
+    SEQUENCE {
+        fddimibMACSMTIndex
+
+                INTEGER,
+        fddimibMACIndex
+                INTEGER,
+        fddimibMACIfIndex
+                INTEGER,
+        fddimibMACFrameStatusFunctions
+                INTEGER,
+        fddimibMACTMaxCapability
+                FddiTimeNano,
+        fddimibMACTVXCapability
+                FddiTimeNano,
+        fddimibMACAvailablePaths
+                INTEGER,
+        fddimibMACCurrentPath
+                INTEGER,
+        fddimibMACUpstreamNbr
+                FddiMACLongAddressType,
+        fddimibMACDownstreamNbr
+                FddiMACLongAddressType,
+        fddimibMACOldUpstreamNbr
+                FddiMACLongAddressType,
+        fddimibMACOldDownstreamNbr
+                FddiMACLongAddressType,
+        fddimibMACDupAddressTest
+                INTEGER,
+        fddimibMACRequestedPaths
+                INTEGER,
+        fddimibMACDownstreamPORTType
+                INTEGER,
+        fddimibMACSMTAddress
+                FddiMACLongAddressType,
+        fddimibMACTReq
+                FddiTimeNano,
+        fddimibMACTNeg
+                FddiTimeNano,
+        fddimibMACTMax
+                FddiTimeNano,
+        fddimibMACTvxValue
+                FddiTimeNano,
+        fddimibMACFrameCts
+                Counter,
+        fddimibMACCopiedCts
+                Counter,
+        fddimibMACTransmitCts
+                Counter,
+        fddimibMACErrorCts
+                Counter,
+        fddimibMACLostCts
+
+                Counter,
+        fddimibMACFrameErrorThreshold
+                INTEGER,
+        fddimibMACFrameErrorRatio
+                INTEGER,
+        fddimibMACRMTState
+                INTEGER,
+        fddimibMACDaFlag
+                INTEGER,
+        fddimibMACUnaDaFlag
+                INTEGER,
+        fddimibMACFrameErrorFlag
+                INTEGER,
+        fddimibMACMAUnitdataAvailable
+                INTEGER,
+        fddimibMACHardwarePresent
+                INTEGER,
+        fddimibMACMAUnitdataEnable
+                INTEGER
+    }
+
+fddimibMACSMTIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the SMT index associated with this
+            MAC."
+    ::= { fddimibMACEntry 1 }
+
+fddimibMACIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Index variable for uniquely identifying the MAC
+            object instances, which is the same as the
+            corresponding resource index in SMT."
+    REFERENCE
+            "ANSI { fddiMAC 34 }"
+    ::= { fddimibMACEntry 2 }
+
+fddimibMACIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the MIB-II ifIndex corresponding to
+            this MAC.  If none is applicable, 0 is returned."
+    REFERENCE
+            "MIB-II"
+    ::= { fddimibMACEntry 3 }
+
+fddimibMACFrameStatusFunctions OBJECT-TYPE
+    SYNTAX  INTEGER (0..7)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the MAC's optional Frame Status
+            processing functions.
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each function present, 2
+            raised to a power is added to the sum.  The powers
+            are according to the following table:
+
+                 function   Power
+             fs-repeating     0
+               fs-setting     1
+              fs-clearing     2 "
+    REFERENCE
+            "ANSI { fddiMAC 11 }"
+    ::= { fddimibMACEntry 4 }
+
+fddimibMACTMaxCapability OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the maximum time value of fddiMACTMax
+            that this MAC can support."
+    REFERENCE
+            "ANSI { fddiMAC 13 }"
+    ::= { fddimibMACEntry 5 }
+
+fddimibMACTVXCapability OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the maximum time value of
+            fddiMACTvxValue that this MAC can support."
+    REFERENCE
+            "ANSI { fddiMAC 14 }"
+    ::= { fddimibMACEntry 6 }
+
+fddimibMACAvailablePaths OBJECT-TYPE
+    SYNTAX  INTEGER (0..7)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the paths available for this MAC (refer
+            to ANSI SMT 9.7.7).
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each type of PATH that
+            this MAC has available, 2 raised to a power is
+            added to the sum.  The powers are according to the
+            following table:
+
+                     Path   Power
+                  Primary     0
+                Secondary     1
+                    Local     2 "
+    REFERENCE
+            "ANSI { fddiMAC 22 }"
+    ::= { fddimibMACEntry 7 }
+
+fddimibMACCurrentPath OBJECT-TYPE
+    SYNTAX  INTEGER {
+                isolated(1),
+                local(2),
+                secondary(3),
+                primary(4),
+                concatenated(5),
+                thru(6)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the Path into which this MAC is
+            currently inserted (refer to ANSI 9.7.7)."
+    REFERENCE
+            "ANSI { fddiMAC 23 }"
+    ::= { fddimibMACEntry 8 }
+
+fddimibMACUpstreamNbr OBJECT-TYPE
+    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The MAC's upstream neighbor's long individual MAC
+            address. It has an initial value of the SMT-
+            Unknown-MAC Address and is only modified as
+
+            specified by the Neighbor Information Frame
+            protocol (refer to ANSI SMT 7.2.1 and 8.2)."
+    REFERENCE
+            "ANSI { fddiMAC 24 }"
+    ::= { fddimibMACEntry 9 }
+
+fddimibMACDownstreamNbr OBJECT-TYPE
+    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The MAC's downstream neighbor's long individual
+            MAC address. It has an initial value of the SMT-
+            Unknown-MAC Address and is only modified as
+            specified by the Neighbor Information Frame
+            protocol (refer to ANSI SMT 7.2.1 and 8.2)."
+    REFERENCE
+            "ANSI { fddiMAC 25 }"
+    ::= { fddimibMACEntry 10 }
+
+fddimibMACOldUpstreamNbr OBJECT-TYPE
+    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The previous value of the MAC's upstream
+            neighbor's long individual MAC address. It has an
+            initial value of the SMT-Unknown- MAC Address and
+            is only modified as specified by the Neighbor
+            Information Frame protocol (refer to ANSI SMT
+            7.2.1 and 8.2)."
+    REFERENCE
+            "ANSI { fddiMAC 26 }"
+    ::= { fddimibMACEntry 11 }
+
+fddimibMACOldDownstreamNbr OBJECT-TYPE
+    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The previous value of the MAC's downstream
+            neighbor's long individual MAC address. It has an
+            initial value of the SMT- Unknown-MAC Address and
+            is only modified as specified by the Neighbor
+            Information Frame protocol (refer to ANSI SMT
+            7.2.1 and 8.2)."
+    REFERENCE
+            "ANSI { fddiMAC 27 }"
+    ::= { fddimibMACEntry 12 }
+
+fddimibMACDupAddressTest OBJECT-TYPE
+    SYNTAX  INTEGER { none(1), pass(2), fail(3) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The Duplicate Address Test flag, Dup_Addr_Test
+            (refer to ANSI 8.2)."
+    REFERENCE
+            "ANSI { fddiMAC 29 }"
+    ::= { fddimibMACEntry 13 }
+
+fddimibMACRequestedPaths OBJECT-TYPE
+    SYNTAX  INTEGER  (0..255)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "List of permitted Paths which specifies the
+            Path(s) into which the MAC may be inserted (refer
+            to ansi SMT 9.7).
+
+            The value is a sum which represents the individual
+            paths that are desired.  This value initially
+            takes the value zero, then for each type of PATH
+            that this node is, 2 raised to a power is added to
+            the sum.  The powers are according to the
+            following table:
+
+                               Path   Power
+                              local     0
+                secondary-alternate     1
+                  primary-alternate     2
+             concatenated-alternate     3
+                secondary-preferred     4
+                  primary-preferred     5
+             concatenated-preferred     6
+                               thru     7 "
+    REFERENCE
+            "ANSI { fddiMAC 32 }"
+    ::= { fddimibMACEntry 14 }
+
+fddimibMACDownstreamPORTType OBJECT-TYPE
+    SYNTAX  INTEGER { a(1), b(2), s(3), m(4), none(5) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the PC-Type of the first port that is
+
+            downstream of this MAC (the exit port)."
+    REFERENCE
+            "ANSI { fddiMAC 33 }"
+    ::= { fddimibMACEntry 15 }
+
+fddimibMACSMTAddress OBJECT-TYPE
+    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The 48-bit individual address of the MAC used for
+            SMT frames."
+    REFERENCE
+            "ANSI { fddiMAC 41 }"
+    ::= { fddimibMACEntry 16 }
+
+fddimibMACTReq OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable is the T_Req_value passed to the
+            MAC.  Without having detected a duplicate, the
+            time value of this variable shall assume the
+            maximum supported time value which is less than or
+            equal to the time value of fddiPATHMaxT-Req.  When
+            a MAC has an address detected as a duplicate, it
+            may use a time value for this variable greater
+            than the time value of fddiPATHTMaxLowerBound.  A
+            station shall cause claim when the new T_Req may
+            cause the value of T_Neg to change in the claim
+            process, (i.e., time value new T_Req < T_Neg, or
+            old T_Req = T_Neg)."
+    REFERENCE
+            "ANSI { fddiMAC 51 }"
+    ::= { fddimibMACEntry 17 }
+
+fddimibMACTNeg OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "It is reported as a FddiTimeNano number."
+    REFERENCE
+            "ANSI { fddiMAC 52 }"
+    ::= { fddimibMACEntry 18 }
+
+fddimibMACTMax OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable is the T_Max_value passed to the
+            MAC.  The time value of this variable shall assume
+            the minimum suported time value which is greater
+            than or equal to the time value of fddiPATHT-
+            MaxLowerBound"
+    REFERENCE
+            "ANSI { fddiMAC 53 }"
+    ::= { fddimibMACEntry 19 }
+
+fddimibMACTvxValue OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable is the TVX_value passed to the MAC.
+            The time value of this variable shall assume the
+            minimum suported time value which is greater than
+            or equal to the time value of
+            fddiPATHTVXLowerBound."
+    REFERENCE
+            "ANSI { fddiMAC 54 }"
+    ::= { fddimibMACEntry 20 }
+
+fddimibMACFrameCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count of the number of frames received by this
+            MAC (refer to ANSI MAC 7.5.1)."
+    REFERENCE
+            "ANSI { fddiMAC 71 }"
+    ::= { fddimibMACEntry 21 }
+
+fddimibMACCopiedCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count that should as closely as possible match
+            the number of frames addressed to (A bit set) and
+            successfully copied into the station's receive
+            buffers (C bit set) by this MAC (refer to ANSI MAC
+            7.5). Note that this count does not include MAC
+
+            frames."
+    REFERENCE
+            "ANSI { fddiMAC 72 }"
+    ::= { fddimibMACEntry 22 }
+
+fddimibMACTransmitCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count that should as closely as possible match
+            the number of frames transmitted by this MAC
+            (refer to ANSI MAC 7.5).  Note that this count
+            does not include MAC frames."
+    REFERENCE
+            "ANSI { fddiMAC 73 }"
+    ::= { fddimibMACEntry 23 }
+
+fddimibMACErrorCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count of the number of frames that were
+            detected in error by this MAC that had not been
+            detected in error by another MAC (refer to ANSI
+            MAC 7.5.2)."
+    REFERENCE
+            "ANSI { fddiMAC 81 }"
+    ::= { fddimibMACEntry 24 }
+
+fddimibMACLostCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count of the number of instances that this MAC
+            detected a format error during frame reception
+            such that the frame was stripped (refer to ANSI
+            MAC 7.5.3)."
+    REFERENCE
+            "ANSI { fddiMAC 82 }"
+    ::= { fddimibMACEntry 25 }
+
+fddimibMACFrameErrorThreshold OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A threshold for determining when a MAC Condition
+            report (see ANSI 8.3.1.1) shall be generated.
+            Stations not supporting variable thresholds shall
+            have a value of 0 and a range of (0..0)."
+    REFERENCE
+            "ANSI { fddiMAC 95 }"
+    ::= { fddimibMACEntry 26 }
+
+fddimibMACFrameErrorRatio OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable is the value of the ratio,
+             ((delta fddiMACLostCts + delta fddiMACErrorCts) /
+             (delta fddiMACFrameCts + delta fddiMACLostCts ))
+             * 2**16 "
+    REFERENCE
+            "ANSI { fddiMAC 96 }"
+    ::= { fddimibMACEntry 27 }
+
+fddimibMACRMTState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                rm0(1), -- Isolated
+                rm1(2), -- Non_Op
+                rm2(3), -- Ring_Op
+                rm3(4), -- Detect
+                rm4(5), -- Non_Op_Dup
+                rm5(6), -- Ring_Op_Dup
+                rm6(7), -- Directed
+                rm7(8)  -- Trace
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the current state of the RMT State
+            Machine (refer to ANSI 10.3.2)."
+    REFERENCE
+            "ANSI { fddiMAC 111 }"
+    ::= { fddimibMACEntry 28 }
+
+fddimibMACDaFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The RMT flag Duplicate Address Flag, DA_Flag
+            (refer to ANSI 10.2.1.2)."
+    REFERENCE
+            "ANSI { fddiMAC 112 }"
+    ::= { fddimibMACEntry 29 }
+
+fddimibMACUnaDaFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A flag, UNDA_Flag (refer to ANSI 8.2.2.1), set
+            when the upstream neighbor reports a duplicate
+            address condition. Cleared when the condition
+            clears."
+    REFERENCE
+            "ANSI { fddiMAC 113 }"
+    ::= { fddimibMACEntry 30 }
+
+fddimibMACFrameErrorFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the MAC Frame Error Condition is
+            present when set. Cleared when the condition
+            clears and on station initialization."
+    REFERENCE
+            "ANSI { fddiMAC 114 }"
+    ::= { fddimibMACEntry 31 }
+
+fddimibMACMAUnitdataAvailable OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable shall take on the value of the
+            MAC_Avail flag defined in RMT."
+    REFERENCE
+            "ANSI { fddiMAC 116 }"
+    ::= { fddimibMACEntry 32 }
+
+fddimibMACHardwarePresent OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable indicates the presence of
+
+            underlying hardware support for this MAC object.
+            If the value of this object is false(2), the
+            reporting of the objects in this entry may be
+            handled in an implementation-specific manner."
+    REFERENCE
+            "ANSI { fddiMAC 117 }"
+    ::= { fddimibMACEntry 33 }
+
+fddimibMACMAUnitdataEnable OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable determines the value of the
+            MA_UNITDATA_Enable flag in RMT.  The default and
+            initial value of this flag is true(1)."
+    REFERENCE
+            "ANSI { fddiMAC 118 }"
+    ::= { fddimibMACEntry 34 }
+
+-- the Enhanced MAC Counters group
+-- Implementation of this Group is optional, but systems
+-- claiming support must implement all variables in this
+-- group
+
+-- the MAC Counters table
+
+fddimibMACCountersTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FddimibMACCountersEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of MAC Counters entries.  The number of
+            entries shall not exceed the value of
+            fddimibMACNumber."
+    ::= { fddimibMACCounters  1 }
+
+fddimibMACCountersEntry OBJECT-TYPE
+    SYNTAX  FddimibMACCountersEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A MAC Counters entry containing information
+            common to a given MAC."
+    INDEX   { fddimibMACSMTIndex, fddimibMACIndex }
+    ::= { fddimibMACCountersTable 1 }
+
+FddimibMACCountersEntry ::=
+    SEQUENCE {
+        fddimibMACTokenCts
+                Counter,
+        fddimibMACTvxExpiredCts
+                Counter,
+        fddimibMACNotCopiedCts
+                Counter,
+        fddimibMACLateCts
+                Counter,
+        fddimibMACRingOpCts
+                Counter,
+        fddimibMACNotCopiedRatio
+                INTEGER,
+        fddimibMACNotCopiedFlag
+                INTEGER,
+        fddimibMACNotCopiedThreshold
+                INTEGER
+    }
+
+fddimibMACTokenCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count that should as closely as possible match
+            the number of times the station has received a
+            token (total of non-restricted and restricted) on
+            this MAC (see ANSI MAC 7.4). This count is
+            valuable for determination of network load."
+    REFERENCE
+            "ANSI { fddiMAC 74 }"
+    ::= { fddimibMACCountersEntry 1 }
+
+fddimibMACTvxExpiredCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count that should as closely as possible match
+            the number of times that TVX has expired."
+    REFERENCE
+            "ANSI { fddiMAC 83 }"
+    ::= { fddimibMACCountersEntry 2 }
+
+fddimibMACNotCopiedCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count that should as closely as possible match
+            the number of frames that were addressed to this
+            MAC but were not copied into its receive buffers
+            (see ANSI MAC 7.5). For example, this might occur
+            due to local buffer congestion. Because of
+            implementation considerations, this count may not
+            match the actual number of frames not copied. It
+            is not a requirement that this count be exact.
+            Note that this count does not include MAC frames."
+    REFERENCE
+            "ANSI { fddiMAC 84 }"
+    ::= { fddimibMACCountersEntry 3 }
+
+fddimibMACLateCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A count that should as closely as possible match
+            the number of TRT expirations since this MAC was
+            reset or a token was received (refer to ANSI MAC
+            7.4.5)."
+    REFERENCE
+            "ANSI { fddiMAC 85 }"
+    ::= { fddimibMACCountersEntry 4 }
+
+fddimibMACRingOpCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+             "The count of the number of times the ring has
+            entered the 'Ring_Operational' state from the
+            'Ring Not Operational' state.  This count is
+            updated when a SM_MA_STATUS.Indication of a change
+            in the Ring_Operational status occurs (refer to
+            ANSI 6.1.4). Because of implementation
+            considerations, this count may be less than the
+            actual RingOp_Ct. It is not a requirement that
+            this count be exact."
+    REFERENCE
+            "ANSI { fddiMAC 86 }"
+    ::= { fddimibMACCountersEntry 5 }
+
+fddimibMACNotCopiedRatio OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable is the value of the ratio:
+
+             (delta fddiMACNotCopiedCts /
+             (delta fddiMACCopiedCts +
+               delta fddiMACNotCopiedCts )) * 2**16 "
+    REFERENCE
+            "ANSI { fddiMAC 105 }"
+    ::= { fddimibMACCountersEntry 6 }
+
+fddimibMACNotCopiedFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates that the Not Copied condition is
+            present when read as true(1).  Set to false(2)
+            when the condition clears and on station
+            initialization."
+    REFERENCE
+            "ANSI { fddiMAC 115 }"
+    ::= { fddimibMACCountersEntry 7 }
+
+fddimibMACNotCopiedThreshold OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A threshold for determining when a MAC condition
+            report shall be generated.  Stations not
+            supporting variable thresholds shall have a value
+            of 0 and a range of (0..0)."
+    REFERENCE
+            "ANSI { fddiMAC 103 }"
+    ::= { fddimibMACCountersEntry 8 }
+
+-- the PATH group
+-- Implementation of the PATH group is mandatory for all
+-- systems which implement manageable FDDI subsystems.
+
+fddimibPATHNumber OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of PATHs possible (across all
+            SMTs) on this network management application
+            entity.  The value for this variable must remain
+            constant at least from one re-initialization of
+            the entity's network management system to the next
+            re-initialization."
+    ::= { fddimibPATH  1 }
+
+-- the PATH table
+
+fddimibPATHTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FddimibPATHEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of PATH entries.  The number of entries
+            shall not exceed the value of fddimibPATHNumber."
+    ::= { fddimibPATH  2 }
+
+fddimibPATHEntry OBJECT-TYPE
+    SYNTAX  FddimibPATHEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A PATH entry containing information common to a
+            given PATH."
+    INDEX   { fddimibPATHSMTIndex, fddimibPATHIndex }
+    ::= { fddimibPATHTable 1 }
+
+FddimibPATHEntry ::=
+    SEQUENCE {
+        fddimibPATHSMTIndex
+                INTEGER,
+        fddimibPATHIndex
+                INTEGER,
+        fddimibPATHTVXLowerBound
+                FddiTimeNano,
+        fddimibPATHTMaxLowerBound
+                FddiTimeNano,
+        fddimibPATHMaxTReq
+                FddiTimeNano
+    }
+
+fddimibPATHSMTIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the SMT index associated with this
+            PATH."
+    ::= { fddimibPATHEntry 1 }
+
+fddimibPATHIndex OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Index variable for uniquely identifying the
+            primary, secondary and local PATH object
+            instances. Local PATH object instances are
+            represented with integer values 3 to 255."
+    REFERENCE
+            "ANSI { fddiPATH 11 }"
+    ::= { fddimibPATHEntry 2 }
+
+fddimibPATHTVXLowerBound OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Specifies the minimum time value of
+            fddiMACTvxValue that shall be used by any MAC that
+            is configured in this path. The operational value
+            of fddiMACTvxValue is managed by settting this
+            variable.  This variable has the time value range
+            of:
+
+            0 < fddimibPATHTVXLowerBound < fddimibPATHMaxTReq
+            Changes to this variable shall either satisfy the
+            time value relationship:
+
+            fddimibPATHTVXLowerBound <=
+            fddimibMACTVXCapability
+
+            of each of the MACs currently on the path, or be
+            considered out of range.  The initial value of
+            fddimibPATHTVXLowerBound shall be 2500 nsec (2.5
+            ms)."
+    REFERENCE
+            "ANSI { fddiPATH 21 }"
+    ::= { fddimibPATHEntry 3 }
+
+fddimibPATHTMaxLowerBound OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Specifies the minimum time value of fddiMACTMax
+            that shall be used by any MAC that is configured
+            in this path.  The operational value of
+            fddiMACTMax is managed by setting this variable.
+            This variable has the time value range of:
+
+            fddimibPATHMaxTReq <= fddimibPATHTMaxLowerBound
+
+            and an absolute time value range of:
+
+            10000nsec (10 msec) <= fddimibPATHTMaxLowerBound
+
+            Changes to this variable shall either satisfy the
+            time value relationship:
+
+            fddimibPATHTMaxLowerBound <
+            fddimibMACTMaxCapability
+
+            of each of the MACs currently on the path, or be
+            considered out of range.  The initial value of
+            fddimibPATHTMaxLowerBound shall be 165000 nsec
+            (165 msec)."
+    REFERENCE
+            "ANSI { fddiPATH 22 }"
+    ::= { fddimibPATHEntry 4 }
+
+fddimibPATHMaxTReq OBJECT-TYPE
+    SYNTAX  FddiTimeNano
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Specifies the maximum time value of fddiMACT-Req
+            that shall be used by any MAC that is configured
+            in this path.  The operational value of fddiMACT-
+            Req is managed by setting this variable.  This
+            variable has the time value range of:
+
+            fddimibPATHTVXLowerBound < fddimibPATHMaxTReq <=
+                                     fddimibPATHTMaxLowerBound.
+
+            The default value of fddimibPATHMaxTReq is 165000
+            nsec (165 msec)."
+    REFERENCE
+            "ANSI { fddiPATH 23 }"
+    ::= { fddimibPATHEntry 5 }
+
+-- the PATH Configuration table
+
+fddimibPATHConfigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FddimibPATHConfigEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A table of Path configuration entries.  This
+            table lists all the resources that may be in this
+            Path."
+    REFERENCE
+            "ANSI { fddiPATH 18 }"
+    ::= { fddimibPATH 3 }
+
+fddimibPATHConfigEntry OBJECT-TYPE
+    SYNTAX FddimibPATHConfigEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of objects containing information
+            for a given PATH Configuration entry."
+    INDEX { fddimibPATHConfigSMTIndex,
+            fddimibPATHConfigPATHIndex,
+            fddimibPATHConfigTokenOrder }
+    ::= { fddimibPATHConfigTable 1 }
+
+FddimibPATHConfigEntry ::=
+    SEQUENCE {
+        fddimibPATHConfigSMTIndex
+            INTEGER,
+        fddimibPATHConfigPATHIndex
+            INTEGER,
+        fddimibPATHConfigTokenOrder
+            INTEGER,
+        fddimibPATHConfigResourceType
+            INTEGER,
+        fddimibPATHConfigResourceIndex
+            INTEGER,
+        fddimibPATHConfigCurrentPath
+            INTEGER
+    }
+
+fddimibPATHConfigSMTIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of the SMT index associated with this
+
+            configuration entry."
+    ::= { fddimibPATHConfigEntry 1 }
+
+fddimibPATHConfigPATHIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of the PATH resource index associated
+            with this configuration entry."
+    ::= { fddimibPATHConfigEntry 2 }
+
+fddimibPATHConfigTokenOrder OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "An object associated with Token order for this
+            entry.  Thus if the token passes resources a, b, c
+            and d, in that order, then the value of this
+            object for these resources would be 1, 2, 3 and 4
+            respectively."
+    ::= { fddimibPATHConfigEntry 3 }
+
+fddimibPATHConfigResourceType OBJECT-TYPE
+    SYNTAX INTEGER { mac(2), port(4) }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The type of resource associated with this
+            configuration entry."
+    ::= { fddimibPATHConfigEntry 4 }
+
+fddimibPATHConfigResourceIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of the SMT resource index used to refer
+            to the instance of this MAC or Port resource."
+    ::= { fddimibPATHConfigEntry 5 }
+
+fddimibPATHConfigCurrentPath OBJECT-TYPE
+    SYNTAX INTEGER {
+             isolated(1), local(2), secondary(3), primary(4),
+             concatenated(5), thru(6)
+           }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The current insertion status for this resource on
+            this Path."
+    ::= { fddimibPATHConfigEntry 6 }
+
+-- the PORT group
+-- Implementation of the PORT group is mandatory for all
+-- systems which implement manageable FDDI subsystems.
+
+fddimibPORTNumber OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of PORT implementations (across
+            all SMTs) on this network management application
+            entity.  The value for this variable must remain
+            constant at least from one re-initialization of
+            the entity's network management system to the next
+            re-initialization."
+    ::= { fddimibPORT  1 }
+
+-- the PORT table
+
+fddimibPORTTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FddimibPORTEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of PORT entries.  The number of entries
+            shall not exceed the value of fddimibPORTNumber."
+    ::= { fddimibPORT  2 }
+
+fddimibPORTEntry OBJECT-TYPE
+    SYNTAX  FddimibPORTEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A PORT entry containing information common to a
+            given PORT."
+    INDEX   { fddimibPORTSMTIndex, fddimibPORTIndex }
+    ::= { fddimibPORTTable 1 }
+
+FddimibPORTEntry ::=
+    SEQUENCE {
+
+        fddimibPORTSMTIndex
+                INTEGER,
+        fddimibPORTIndex
+                INTEGER,
+        fddimibPORTMyType
+                INTEGER,
+        fddimibPORTNeighborType
+                INTEGER,
+        fddimibPORTConnectionPolicies
+                INTEGER,
+        fddimibPORTMACIndicated
+                INTEGER,
+        fddimibPORTCurrentPath
+                INTEGER,
+        fddimibPORTRequestedPaths
+                OCTET STRING,
+        fddimibPORTMACPlacement
+                FddiResourceId,
+        fddimibPORTAvailablePaths
+                INTEGER,
+        fddimibPORTPMDClass
+                INTEGER,
+        fddimibPORTConnectionCapabilities
+                INTEGER,
+        fddimibPORTBSFlag
+                INTEGER,
+        fddimibPORTLCTFailCts
+                Counter,
+        fddimibPORTLerEstimate
+                INTEGER,
+        fddimibPORTLemRejectCts
+                Counter,
+        fddimibPORTLemCts
+                Counter,
+        fddimibPORTLerCutoff
+                INTEGER,
+        fddimibPORTLerAlarm
+                INTEGER,
+        fddimibPORTConnectState
+                INTEGER,
+        fddimibPORTPCMState
+                INTEGER,
+        fddimibPORTPCWithhold
+                INTEGER,
+        fddimibPORTLerFlag
+                INTEGER,
+        fddimibPORTHardwarePresent
+                INTEGER,
+        fddimibPORTAction
+                INTEGER
+    }
+
+fddimibPORTSMTIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the SMT index associated with this
+            PORT."
+    ::= { fddimibPORTEntry 1 }
+
+fddimibPORTIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A unique value for each PORT within a given SMT,
+            which is the same as the corresponding resource
+            index in SMT.  The value for each PORT must remain
+            constant at least from one re-initialization of
+            the entity's network management system to the next
+            re-initialization."
+    REFERENCE
+            "ANSI { fddiPORT 29 }"
+    ::= { fddimibPORTEntry 2 }
+
+fddimibPORTMyType OBJECT-TYPE
+    SYNTAX  INTEGER { a(1), b(2), s(3), m(4), none(5) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the PORT's PC_Type (refer to ANSI
+            9.4.1, and 9.6.3.2)."
+    REFERENCE
+            "ANSI { fddiPORT 12 }"
+    ::= { fddimibPORTEntry 3 }
+
+fddimibPORTNeighborType OBJECT-TYPE
+    SYNTAX  INTEGER { a(1), b(2), s(3), m(4), none(5) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of the remote PORT as determined in PCM.
+            This variable has an initial value of none, and is
+            only modified in PC_RCode(3)_Actions (refer to
+            ANSI SMT 9.6.3.2)."
+    REFERENCE
+            "ANSI { fddiPORT 13 }"
+    ::= { fddimibPORTEntry 4 }
+
+fddimibPORTConnectionPolicies OBJECT-TYPE
+    SYNTAX  INTEGER (0..3)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A value representing the PORT's connection
+            policies desired in the node. The value of pc-
+            mac-lct is a term used in the PC_MAC_LCT Flag (see
+            9.4.3.2).  The value of pc-mac-loop is a term used
+            in the PC_MAC_Loop Flag.
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each PORT policy, 2
+            raised to a power is added to the sum.  The powers
+            are according to the following table:
+
+                          Policy   Power
+                      pc-mac-lct     0
+                     pc-mac-loop     1 "
+    REFERENCE
+            "ANSI { fddiPORT 14 }"
+    ::= { fddimibPORTEntry 5 }
+
+fddimibPORTMACIndicated OBJECT-TYPE
+    SYNTAX  INTEGER {
+                tVal9FalseRVal9False(1),
+                tVal9FalseRVal9True(2),
+                tVal9TrueRVal9False(3),
+                tVal9TrueRVal9True(4)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The indications (T_Val(9), R_Val(9)) in PC-
+            Signalling, of the intent to place a MAC in the
+            output token path to a PORT (refer to ANSI SMT
+            9.6.3.2.)."
+    REFERENCE
+            "ANSI { fddiPORT 15 }"
+    ::= { fddimibPORTEntry 6 }
+
+fddimibPORTCurrentPath OBJECT-TYPE
+    SYNTAX  INTEGER {
+                ce0(1), -- isolated
+
+                ce1(2), -- local
+                ce2(3), -- secondary
+                ce3(4), -- primary
+                ce4(5), -- concatenated
+                ce5(6)  -- thru
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the Path(s) into which this PORT is
+            currently inserted."
+    REFERENCE
+            "ANSI { fddiPORT 16 }"
+    ::= { fddimibPORTEntry 7 }
+
+fddimibPORTRequestedPaths OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (3))
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable is a list of permitted Paths where
+            each list element defines the Port's permitted
+            Paths.  The first octet corresponds to 'none', the
+            second octet to 'tree', and the third octet to
+            'peer'."
+    REFERENCE
+            "ANSI { fddiPORT 17 }"
+    ::= { fddimibPORTEntry 8 }
+
+fddimibPORTMACPlacement OBJECT-TYPE
+    SYNTAX  FddiResourceId -- INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the MAC, if any, whose transmit path
+            exits the station via this PORT. The value shall
+            be zero if there is no MAC associated with the
+            PORT. Otherwise, the MACIndex of the MAC will be
+            the value of the variable."
+    REFERENCE
+            "ANSI { fddiPORT 18 }"
+    ::= { fddimibPORTEntry 9 }
+
+fddimibPORTAvailablePaths OBJECT-TYPE
+    SYNTAX  INTEGER (0..7)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates the Paths which are available to this
+            Port. In the absence of faults, the A and B Ports
+            will always have both the Primary and Secondary
+            Paths available.
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each type of PATH that
+            this port has available, 2 raised to a power is
+            added to the sum.  The powers are according to the
+            following table:
+
+                     Path   Power
+                  Primary     0
+                Secondary     1
+                    Local     2 "
+    REFERENCE
+            "ANSI { fddiPORT 19 }"
+    ::= { fddimibPORTEntry 10 }
+
+fddimibPORTPMDClass OBJECT-TYPE
+    SYNTAX  INTEGER {
+                    multimode(1),
+                    single-mode1(2),
+                    single-mode2(3),
+                    sonet(4),
+                    low-cost-fiber(5),
+                    twisted-pair(6),
+                    unknown(7),
+                    unspecified(8)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable indicates the type of PMD entity
+            associated with this port."
+    REFERENCE
+            "ANSI { fddiPORT 22 }"
+    ::= { fddimibPORTEntry 11 }
+
+fddimibPORTConnectionCapabilities OBJECT-TYPE
+    SYNTAX  INTEGER (0..3)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A value that indicates the connection
+            capabilities of the port. The pc-mac-lct bit
+            indicates that the station has the capability of
+            setting the PC_MAC_LCT Flag. The pc-mac-loop bit
+
+            indicates that the station has the capability of
+            setting the PC_MAC_Loop Flag (refer to ANSI
+            9.4.3.2).
+
+            The value is a sum.  This value initially takes
+            the value zero, then for each capability that this
+            port has, 2 raised to a power is added to the sum.
+            The powers are according to the following table:
+
+               capability   Power
+               pc-mac-lct     0
+              pc-mac-loop     1 "
+    REFERENCE
+            "ANSI { fddiPORT 23 }"
+    ::= { fddimibPORTEntry 12 }
+
+fddimibPORTBSFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable assumes the value of the BS_Flag
+            (refer to ANSI SMT 9.4.3.3)."
+    REFERENCE
+            "ANSI { fddiPORT 33 }"
+    ::= { fddimibPORTEntry 13 }
+
+fddimibPORTLCTFailCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The count of the consecutive times the link
+            confidence test (LCT) has failed during connection
+            management (refer to ANSI 9.4.1)."
+    REFERENCE
+            "ANSI { fddiPORT 42 }"
+    ::= { fddimibPORTEntry 14 }
+
+fddimibPORTLerEstimate OBJECT-TYPE
+    SYNTAX  INTEGER (4..15)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A long term average link error rate. It ranges
+            from 10**-4 to 10**-15 and is reported as the
+            absolute value of the base 10 logarithm (refer to
+            ANSI SMT 9.4.7.5.)."
+    REFERENCE
+            "ANSI { fddiPORT 51 }"
+    ::= { fddimibPORTEntry 15 }
+
+fddimibPORTLemRejectCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A link error monitoring count of the times that a
+            link has been rejected."
+    REFERENCE
+            "ANSI { fddiPORT 52 }"
+    ::= { fddimibPORTEntry 16 }
+
+fddimibPORTLemCts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The aggregate link error monitor error count, set
+            to zero only on station initialization."
+    REFERENCE
+            "ANSI { fddiPORT 53 }"
+    ::= { fddimibPORTEntry 17 }
+
+fddimibPORTLerCutoff OBJECT-TYPE
+    SYNTAX  INTEGER (4..15)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+             "The link error rate estimate at which a link
+            connection will be broken. It ranges from 10**-4
+            to 10**-15 and is reported as the absolute value
+            of the base 10 logarithm (default of 7)."
+    REFERENCE
+            "ANSI { fddiPORT 58 }"
+    ::= { fddimibPORTEntry 18 }
+
+fddimibPORTLerAlarm OBJECT-TYPE
+    SYNTAX  INTEGER (4..15)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The link error rate estimate at which a link
+            connection will generate an alarm. It ranges from
+            10**-4 to 10**-15 and is reported as the absolute
+            value of the base 10 logarithm of the estimate
+
+            (default of 8)."
+    REFERENCE
+            "ANSI { fddiPORT 59 }"
+    ::= { fddimibPORTEntry 19 }
+
+fddimibPORTConnectState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                disabled(1),
+                connecting(2),
+                standby(3),
+                active(4)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "An indication of the connect state of this PORT
+            and is equal to the value of Connect_State (refer
+            to ANSI 9.4.1)"
+    REFERENCE
+            "ANSI { fddiPORT 61 }"
+    ::= { fddimibPORTEntry 20 }
+
+fddimibPORTPCMState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                pc0(1), -- Off
+                pc1(2), -- Break
+                pc2(3), -- Trace
+                pc3(4), -- Connect
+                pc4(5), -- Next
+                pc5(6), -- Signal
+                pc6(7), -- Join
+                pc7(8), -- Verify
+                pc8(9), -- Active
+                pc9(10) -- Maint
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The state of this Port's PCM state machine refer
+            to ANSI SMT 9.6.2)."
+    REFERENCE
+            "ANSI { fddiPORT 62 }"
+    ::= { fddimibPORTEntry 21 }
+
+fddimibPORTPCWithhold OBJECT-TYPE
+    SYNTAX  INTEGER {
+                 none(1),
+                 m-m(2),
+                 otherincompatible(3),
+                 pathnotavailable(4)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of PC_Withhold (refer to ANSI SMT
+            9.4.1)."
+    REFERENCE
+            "ANSI { fddiPORT 63 }"
+    ::= { fddimibPORTEntry 22 }
+
+fddimibPORTLerFlag OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The condition becomes active when the value of
+            fddiPORTLerEstimate is less than or equal to
+            fddiPORTLerAlarm. This will be reported with the
+            Status Report Frames (SRF) (refer to ANSI SMT
+             7.2.7 and 8.3)."
+    REFERENCE
+            "ANSI { fddiPORT 64 }"
+    ::= { fddimibPORTEntry 23 }
+
+fddimibPORTHardwarePresent OBJECT-TYPE
+    SYNTAX  INTEGER { true(1), false(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This variable indicates the presence of
+            underlying hardware support for this Port object.
+            If the value of this object is false(2), the
+            reporting of the objects in this entry may be
+            handled in an implementation-specific manner."
+    REFERENCE
+            "ANSI { fddiPORT 65 }"
+    ::= { fddimibPORTEntry 24 }
+
+fddimibPORTAction OBJECT-TYPE
+    SYNTAX  INTEGER {
+            other(1),           -- none of the following
+            maintPORT(2),
+            enablePORT(3),
+            disablePORT(4),
+            startPORT(5),
+            stopPORT(6)
+
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Causes a Control signal to be generated with a
+            control_action of 'Signal' and the 'variable'
+            parameter set with the appropriate value (i.e.,
+            PC_Maint, PC_Enable, PC_Disable, PC_Start, or
+            PC_Stop) (refer to ANSI 9.4.2)."
+    REFERENCE
+            "ANSI { fddiPORT 70 }"
+    ::= { fddimibPORTEntry 25 }
+
+END
diff --git a/snmp_builder/mibs/FIBRE-CHANNEL-FE-MIB.mib b/snmp_builder/mibs/FIBRE-CHANNEL-FE-MIB.mib
new file mode 100644
index 0000000..3fd94b1
--- /dev/null
+++ b/snmp_builder/mibs/FIBRE-CHANNEL-FE-MIB.mib
@@ -0,0 +1,1781 @@
+FIBRE-CHANNEL-FE-MIB DEFINITIONS ::= BEGIN
+  IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, Counter32, Gauge32, Integer32, mib-2
+      FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, TruthValue, TimeStamp
+      FROM SNMPv2-TC
+    SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB                   -- rfc2571
+    MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF;
+
+  fcFeMIB MODULE-IDENTITY
+    LAST-UPDATED "200005180000Z"
+    ORGANIZATION "IETF IPFC Working Group"
+    CONTACT-INFO "Kha Sin Teow
+                  Brocade Communications Systems,
+                  1901 Guadalupe Parkway,
+                  San Jose, CA 95131
+                  U.S.A
+                  Tel: +1 408 487 8180
+                  Fax: +1 408 487 8190
+                  Email: khasin@Brocade.COM
+
+                 WG Mailing list:ipfc@standards.gadzoox.com
+                 To Subscribe: ipfc-request@standards.gadzoox.com
+                 In Body: subscribe"
+    DESCRIPTION "The MIB module for Fibre Channel Fabric Element."
+    REVISION "200005180000Z"
+    DESCRIPTION "Initial revision, published as RFC 2837."
+    ::= { mib-2 75 }
+
+  fcFeMIBObjects OBJECT IDENTIFIER ::= { fcFeMIB 1 }
+
+   --  Note:
+   --  fcFeMIBConformance OBJECT IDENTIFIER ::= { fcFeMIB 2 }
+   --  see at the end of the module
+
+  -- Groups under fcFeMIBObjects
+
+  fcFeConfig       OBJECT IDENTIFIER ::= { fcFeMIBObjects 1 }
+  fcFeStatus       OBJECT IDENTIFIER ::= { fcFeMIBObjects 2 }
+  fcFeError        OBJECT IDENTIFIER ::= { fcFeMIBObjects 3 }
+  fcFeAccounting   OBJECT IDENTIFIER ::= { fcFeMIBObjects 4 }
+  fcFeCapabilities OBJECT IDENTIFIER ::= { fcFeMIBObjects 5 }
+
+  -- Textual Conventions
+  MilliSeconds ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents time unit value in milliseconds."
+    SYNTAX         Unsigned32
+
+  MicroSeconds ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents time unit value in microseconds."
+    SYNTAX         Unsigned32
+
+  FcNameId ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the Worldwide Name associated with
+                    a Fibre Channel (FC) entity."
+    SYNTAX         OCTET STRING (SIZE (8))
+
+  FcAddressId ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents Fibre Channel Address ID, a 24-bit
+                    value unique within the address space of a Fabric."
+    SYNTAX         OCTET STRING (SIZE (3))
+
+  FcRxDataFieldSize ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the receive data field size of an
+                    NxPort or FxPort."
+    SYNTAX         Integer32 (128..2112)
+
+  FcBbCredit ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the buffer-to-buffer credit of an
+                    NxPort or FxPort."
+    SYNTAX         Integer32 (0..32767)
+
+  FcphVersion ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the version of FC-PH supported by an
+                    NxPort or FxPort."
+    SYNTAX         Integer32 (0..255)
+
+  FcStackedConnMode ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents an enumerated value used to indicate
+                    the Class 1 Stacked Connect Mode supported by
+                    an NxPort or FxPort."
+    SYNTAX         INTEGER {
+                        none(1),
+                        transparent(2),
+                        lockedDown(3)
+    }
+
+  FcCosCap ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the class of service capability of an
+                    NxPort or FxPort."
+    SYNTAX         BITS { classF(0), class1(1), class2(2), class3(3),
+                          class4(4), class5(5), class6(6) }
+
+  FcFeModuleCapacity ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the maximum number of modules within
+                    a Fabric Element."
+    SYNTAX         Unsigned32
+
+  FcFeFxPortCapacity ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the maximum number of FxPorts within
+                    a module."
+    SYNTAX         Unsigned32
+
+  FcFeModuleIndex ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the module index within a conceptual table."
+    SYNTAX         Unsigned32
+
+  FcFeFxPortIndex ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the FxPort index within a conceptual table."
+    SYNTAX         Unsigned32
+
+  FcFeNxPortIndex ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the NxPort index within a conceptual table."
+    SYNTAX         Integer32 (1..126)
+
+  FcBbCreditModel ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "Represents the BB_Credit model of an FxPort."
+    SYNTAX         INTEGER { regular(1), alternate (2) }
+
+  -- The Configuration group
+
+  -- This group consists of scalar objects and tables.
+  -- It contains the configuration and service parameters
+  -- of the Fabric Element and the FxPorts.
+  -- The group represents a set of parameters associated with
+  -- the Fabric Element  or an FxPort to support its NxPorts.
+
+  fcFeFabricName OBJECT-TYPE
+      SYNTAX      FcNameId
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The Name_Identifier of the Fabric to which this Fabric
+          Element belongs."
+  ::= { fcFeConfig 1 }
+
+  fcFeElementName OBJECT-TYPE
+      SYNTAX      FcNameId
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The Name_Identifier of the Fabric Element."
+  ::= { fcFeConfig 2 }
+
+  fcFeModuleCapacity OBJECT-TYPE
+      SYNTAX      FcFeModuleCapacity
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The maximum number of modules in the Fabric Element,
+          regardless of their current state."
+  ::= { fcFeConfig 3 }
+
+  -- The Module Table.
+  -- This table contains one entry for each module,
+  -- information of the modules.
+
+  fcFeModuleTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFeModuleEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each module in the
+          Fabric Element, information of the modules."
+  ::= { fcFeConfig 4 }
+
+  fcFeModuleEntry OBJECT-TYPE
+      SYNTAX      FcFeModuleEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing the configuration parameters of a
+          module."
+      INDEX { fcFeModuleIndex }
+  ::= { fcFeModuleTable 1 }
+
+  FcFeModuleEntry ::=
+      SEQUENCE {
+          fcFeModuleIndex
+              FcFeModuleIndex,
+          fcFeModuleDescr
+              SnmpAdminString,
+          fcFeModuleObjectID
+              OBJECT IDENTIFIER,
+          fcFeModuleOperStatus
+              INTEGER,
+          fcFeModuleLastChange
+              TimeStamp,
+          fcFeModuleFxPortCapacity
+              FcFeFxPortCapacity,
+          fcFeModuleName
+              FcNameId
+      }
+
+  fcFeModuleIndex OBJECT-TYPE
+      SYNTAX      FcFeModuleIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "This object identifies the module within the Fabric Element
+          for which this entry contains information. This value is
+          never greater than fcFeModuleCapacity."
+  ::= { fcFeModuleEntry 1 }
+
+  fcFeModuleDescr OBJECT-TYPE
+      SYNTAX      SnmpAdminString
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A textual description of the module. This value should
+          include the full name and version identification of the
+          module."
+  ::= { fcFeModuleEntry 2 }
+
+  fcFeModuleObjectID OBJECT-TYPE
+      SYNTAX      OBJECT IDENTIFIER
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The vendor's authoritative identification of the module.
+          This value may be allocated within the SMI enterprises
+          subtree (1.3.6.1.4.1) and provides a straight-forward and
+          unambiguous means for determining what kind of module is
+          being managed.
+
+          For example, this object could take the value
+          1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned
+          the subtree 1.3.6.1.4.1.99649, and had assigned the
+          identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16
+          PlugInCard.'"
+  ::= { fcFeModuleEntry 3 }
+
+  fcFeModuleOperStatus    OBJECT-TYPE
+      SYNTAX      INTEGER {
+                      online  (1), -- functional
+                      offline (2), -- not available
+                      testing (3), -- under testing
+                      faulty  (4)  -- defective
+                  }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "This object indicates the operational status of the module:
+          online(1)   the module is functioning properly;
+          offline(2)  the module is not available;
+          testing(3)  the module is under testing; and
+          faulty(4)   the module is defective in some way."
+  ::= { fcFeModuleEntry 4 }
+
+  fcFeModuleLastChange OBJECT-TYPE
+      SYNTAX      TimeStamp
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "This object contains the value of sysUpTime when the module
+          entered its current operational status. A value of zero
+          indicates that the operational status of the module has not
+          changed since the agent last restarted."
+  ::= { fcFeModuleEntry 5 }
+
+  fcFeModuleFxPortCapacity OBJECT-TYPE
+      SYNTAX      FcFeFxPortCapacity
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of FxPort that can be contained within the
+          module. Within each module, the ports are uniquely numbered
+          in the range from 1 to fcFeModuleFxPortCapacity inclusive.
+          However, the numbers are not required to be contiguous."
+  ::= { fcFeModuleEntry 6 }
+
+  fcFeModuleName OBJECT-TYPE
+      SYNTAX      FcNameId
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The Name_Identifier of the module."
+  ::= { fcFeModuleEntry 7 }
+
+  -- the FxPort Configuration Table.
+  -- This table contains, one entry for each FxPort,
+  -- configuration parameters of the ports.
+
+ fcFxPortTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF FcFxPortEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+        "A table that contains, one entry for each FxPort in the
+         Fabric Element, configuration and service parameters of the
+         FxPorts."
+ ::= { fcFeConfig 5 }
+
+ fcFxPortEntry OBJECT-TYPE
+     SYNTAX      FcFxPortEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+        "An entry containing the configuration and service parameters
+         of a FxPort."
+     INDEX { fcFeModuleIndex, fcFxPortIndex }
+ ::= { fcFxPortTable 1 }
+
+ FcFxPortEntry ::=
+     SEQUENCE {
+         fcFxPortIndex
+             FcFeFxPortIndex,
+         fcFxPortName
+             FcNameId,
+         -- FxPort common service parameters
+         fcFxPortFcphVersionHigh
+             FcphVersion,
+         fcFxPortFcphVersionLow
+             FcphVersion,
+         fcFxPortBbCredit
+             FcBbCredit,
+         fcFxPortRxBufSize
+             FcRxDataFieldSize,
+         fcFxPortRatov
+             MilliSeconds,
+         fcFxPortEdtov
+             MilliSeconds,
+         -- FxPort class service parameters
+         fcFxPortCosSupported
+             FcCosCap,
+         fcFxPortIntermixSupported
+             TruthValue,
+         fcFxPortStackedConnMode
+             FcStackedConnMode,
+         fcFxPortClass2SeqDeliv
+             TruthValue,
+         fcFxPortClass3SeqDeliv
+             TruthValue,
+         -- other configuration parameters
+         fcFxPortHoldTime
+             MicroSeconds
+     }
+
+  fcFxPortIndex OBJECT-TYPE
+      SYNTAX      FcFeFxPortIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "This object identifies the FxPort within the module.  This
+          number ranges from 1 to the value of fcFeModulePortCapacity
+          for the associated module. The value remains constant for
+          the identified FxPort until the module is re-initialized."
+  ::= { fcFxPortEntry 1 }
+
+  fcFxPortName OBJECT-TYPE
+      SYNTAX      FcNameId
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The World_wide Name of this FxPort.  Each FxPort has a
+          unique Port World_wide Name within the Fabric."
+  ::= { fcFxPortEntry 2 }
+
+  -- FxPort common service parameters
+
+  fcFxPortFcphVersionHigh OBJECT-TYPE
+      SYNTAX      FcphVersion
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The highest or most recent version of FC-PH that the FxPort
+          is configured to support."
+  ::= { fcFxPortEntry 3 }
+
+  fcFxPortFcphVersionLow OBJECT-TYPE
+      SYNTAX      FcphVersion
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The lowest or earliest version of FC-PH that the FxPort is
+          configured to support."
+  ::= { fcFxPortEntry 4 }
+
+  fcFxPortBbCredit OBJECT-TYPE
+      SYNTAX      FcBbCredit
+      UNITS       "buffers"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The total number of receive buffers available for holding
+          Class 1 connect-request, Class 2 or 3 frames from the
+          attached NxPort.  It is for buffer-to-buffer flow control
+          in the direction from the attached NxPort (if applicable)
+          to FxPort."
+      ::= { fcFxPortEntry 5 }
+
+  fcFxPortRxBufSize OBJECT-TYPE
+      SYNTAX      FcRxDataFieldSize
+      UNITS       "bytes"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The largest Data_Field Size (in octets) for an FT_1 frame
+          that can be received by the FxPort."
+  ::= { fcFxPortEntry 6 }
+
+  fcFxPortRatov OBJECT-TYPE
+      SYNTAX      MilliSeconds
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The Resource_Allocation_Timeout Value configured for the
+          FxPort.  This is used as the timeout value for determining
+          when to reuse an NxPort resource such as a
+          Recovery_Qualifier.  It represents E_D_TOV (see next
+          object) plus twice the maximum time that a frame may be
+          delayed within the Fabric and still be delivered."
+      ::= { fcFxPortEntry 7 }
+
+  fcFxPortEdtov OBJECT-TYPE
+      SYNTAX      MilliSeconds
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The E_D_TOV value configured for the FxPort. The
+          Error_Detect_Timeout Value is used as the timeout value for
+          detecting an error condition."
+  ::= { fcFxPortEntry 8 }
+
+  -- FxPort class service parameters
+
+  fcFxPortCosSupported OBJECT-TYPE
+      SYNTAX      FcCosCap
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A value indicating the set of Classes of Service supported
+          by the FxPort."
+  ::= { fcFxPortEntry 9 }
+
+  fcFxPortIntermixSupported OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether or not the FxPort supports an
+          Intermixed Dedicated Connection."
+  ::= { fcFxPortEntry 10 }
+
+  fcFxPortStackedConnMode OBJECT-TYPE
+      SYNTAX      FcStackedConnMode
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A value indicating the mode of Stacked Connect supported by
+          the FxPort."
+  ::= { fcFxPortEntry 11 }
+
+  fcFxPortClass2SeqDeliv OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether or not Class 2 Sequential
+          Delivery is supported by the FxPort."
+  ::= { fcFxPortEntry 12 }
+
+  fcFxPortClass3SeqDeliv OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether or not Class 3 Sequential
+          Delivery is supported by the FxPort."
+  ::= { fcFxPortEntry 13 }
+
+  -- other FxPort parameters
+
+  fcFxPortHoldTime OBJECT-TYPE
+      SYNTAX      MicroSeconds
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The maximum time (in microseconds) that the FxPort shall
+          hold a frame before discarding the frame if it is unable to
+          deliver the frame. The value 0 means that the FxPort does
+          not support this parameter."
+  ::= { fcFxPortEntry 14 }
+
+  -- the Status group
+
+  -- This group consists of tables that contains operational
+  -- status and established service parameters for the Fabric
+  -- Element and the attached NxPorts.
+
+  -- The FxPort Status table
+  -- This table contains, one entry for each FxPort,
+  -- the operational status and parameters of the FxPorts.
+
+  fcFxPortStatusTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortStatusEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort in the
+          Fabric Element, operational status and parameters of the
+          FxPorts."
+  ::= { fcFeStatus 1 }
+
+  fcFxPortStatusEntry OBJECT-TYPE
+      SYNTAX      FcFxPortStatusEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing operational status and parameters of a
+          FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortStatusTable 1 }
+
+  FcFxPortStatusEntry ::=
+      SEQUENCE {
+          fcFxPortID
+              FcAddressId,
+          fcFxPortBbCreditAvailable
+              Gauge32,
+          fcFxPortOperMode
+              INTEGER,
+          fcFxPortAdminMode
+              INTEGER
+      }
+
+  fcFxPortID   OBJECT-TYPE
+      SYNTAX      FcAddressId
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The address identifier by which this FxPort is identified
+          within the Fabric.  The FxPort may assign its address
+          identifier to its attached NxPort(s) during Fabric Login."
+  ::= { fcFxPortStatusEntry 1 }
+
+  fcFxPortBbCreditAvailable OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "buffers"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of buffers currently available for receiving
+
+          frames from the attached port in the buffer-to-buffer flow
+          control. The value should be less than or equal to
+          fcFxPortBbCredit."
+  ::= { fcFxPortStatusEntry 2 }
+
+  fcFxPortOperMode    OBJECT-TYPE
+      SYNTAX              INTEGER { unknown(1), fPort(2), flPort(3) }
+      MAX-ACCESS          read-only
+      STATUS              current
+      DESCRIPTION
+         "The current operational mode of the FxPort."
+  ::= { fcFxPortStatusEntry 3 }
+
+  fcFxPortAdminMode   OBJECT-TYPE
+      SYNTAX              INTEGER { fPort(2), flPort(3) }
+      MAX-ACCESS          read-write
+      STATUS              current
+      DESCRIPTION
+         "The desired operational mode of the FxPort."
+  ::= { fcFxPortStatusEntry 4 }
+
+  -- the FxPort Physical Level table
+  -- This table contains, one entry for each FxPort in the
+  -- Fabric Element, the physical level status and parameters
+  -- of the FxPorts.
+
+  fcFxPortPhysTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortPhysEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort in the
+          Fabric Element, physical level status and parameters of the
+          FxPorts."
+  ::= { fcFeStatus 2 }
+
+  fcFxPortPhysEntry OBJECT-TYPE
+      SYNTAX      FcFxPortPhysEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing physical level status and parameters of
+          a FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortPhysTable 1 }
+
+  FcFxPortPhysEntry ::=
+
+      SEQUENCE {
+          fcFxPortPhysAdminStatus
+              INTEGER,
+          fcFxPortPhysOperStatus
+              INTEGER,
+          fcFxPortPhysLastChange
+              TimeStamp,
+          fcFxPortPhysRttov
+              MilliSeconds
+      }
+
+  fcFxPortPhysAdminStatus OBJECT-TYPE
+      SYNTAX      INTEGER {
+                      online  (1),  -- place port online
+                      offline (2),  -- take port offline
+                      testing (3)   -- initiate test procedures
+                  }
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The desired state of the FxPort.  A management station may
+          place the FxPort in a desired state by setting this object
+          accordingly.  The testing(3) state indicates that no
+          operational frames can be passed.  When a Fabric Element
+          initializes, all FxPorts start with fcFxPortPhysAdminStatus
+          in the offline(2) state.  As the result of either explicit
+          management action or per configuration information
+          accessible by the Fabric Element, fcFxPortPhysAdminStatus
+          is then changed to either the online(1) or testing(3)
+          states, or remains in the offline state."
+  ::= { fcFxPortPhysEntry 1 }
+
+  fcFxPortPhysOperStatus   OBJECT-TYPE
+      SYNTAX      INTEGER {
+          online       (1), -- Login may proceed
+          offline      (2), -- Login cannot proceed
+          testing      (3), -- port is under test
+          linkFailure  (4)  -- failure after online/testing
+      }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The current operational status of the FxPort.  The
+          testing(3) indicates that no operational frames can be
+          passed.  If fcFxPortPhysAdminStatus is offline(2) then
+          fcFxPortPhysOperStatus should be offline(2). If
+          fcFxPortPhysAdminStatus is changed to online(1) then
+          fcFxPortPhysOperStatus should change to online(1) if the
+
+          FxPort is ready to accept Fabric Login request from the
+          attached NxPort; it should proceed and remain in the link-
+          failure(4) state if and only if there is a fault that
+          prevents it from going to the online(1) state."
+  ::= { fcFxPortPhysEntry 2 }
+
+  fcFxPortPhysLastChange OBJECT-TYPE
+      SYNTAX      TimeStamp
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The value of sysUpTime at the time the FxPort entered its
+          current operational status. A value of zero indicates that
+          the FxPort's operational status has not changed since the
+          agent last restarted."
+  ::= { fcFxPortPhysEntry 3 }
+
+  fcFxPortPhysRttov OBJECT-TYPE
+      SYNTAX      MilliSeconds
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The Receiver_Transmitter_Timeout value of the FxPort. This
+          is used by the receiver logic to detect Loss of
+          Synchronization."
+  ::= { fcFxPortPhysEntry 4 }
+
+  -- The FxPort Fabric Login table
+  --
+  -- This table contains, one entry for each FxPort in the
+  -- Fabric Element, the Service Parameters that have been
+  -- established from the most recent Fabric Login,
+  -- implicit or explicit.
+
+  fcFxLoginTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxLoginEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each NxPort attached
+          to a particular FxPort in the Fabric Element, services
+          parameters established from the most recent Fabric Login,
+          explicit or implicit. Note that an FxPort may have one or
+          more NxPort attached to it."
+  ::= { fcFeStatus 3 }
+
+  fcFxLoginEntry OBJECT-TYPE
+      SYNTAX      FcFxLoginEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing service parameters established from a
+          successful Fabric Login."
+      INDEX { fcFeModuleIndex, fcFxPortIndex, fcFxPortNxLoginIndex }
+  ::= { fcFxLoginTable 1 }
+
+  FcFxLoginEntry ::=
+      SEQUENCE {
+          fcFxPortNxLoginIndex
+              FcFeNxPortIndex,
+          fcFxPortFcphVersionAgreed
+              FcphVersion,
+          fcFxPortNxPortBbCredit
+              FcBbCredit,
+          fcFxPortNxPortRxDataFieldSize
+              FcRxDataFieldSize,
+          fcFxPortCosSuppAgreed
+              FcCosCap,
+          fcFxPortIntermixSuppAgreed
+              TruthValue,
+          fcFxPortStackedConnModeAgreed
+              FcStackedConnMode,
+          fcFxPortClass2SeqDelivAgreed
+              TruthValue,
+          fcFxPortClass3SeqDelivAgreed
+              TruthValue,
+          --
+          fcFxPortNxPortName
+              FcNameId,
+          fcFxPortConnectedNxPort
+              FcAddressId,
+          fcFxPortBbCreditModel
+              FcBbCreditModel
+      }
+
+  fcFxPortNxLoginIndex OBJECT-TYPE
+      SYNTAX      FcFeNxPortIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "The object identifies the associated NxPort in the
+          attachment for which the entry contains information."
+  ::= { fcFxLoginEntry 1 }
+
+  fcFxPortFcphVersionAgreed OBJECT-TYPE
+      SYNTAX      FcphVersion
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The version of FC-PH that the FxPort has agreed to support
+          from the Fabric Login"
+  ::= { fcFxLoginEntry 2 }
+
+  fcFxPortNxPortBbCredit OBJECT-TYPE
+      SYNTAX      FcBbCredit
+      UNITS       "buffers"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The total number of buffers available for holding Class 1
+          connect-request, Class 2 or Class 3 frames to be
+          transmitted to the attached NxPort.  It is for buffer-to-
+          buffer flow control in the direction from FxPort to NxPort.
+          The buffer-to-buffer flow control mechanism is indicated in
+          the respective fcFxPortBbCreditModel."
+  ::= { fcFxLoginEntry 3 }
+
+  fcFxPortNxPortRxDataFieldSize OBJECT-TYPE
+      SYNTAX      FcRxDataFieldSize
+      UNITS       "bytes"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The Receive Data Field Size of the attached NxPort. This
+          object specifies the largest Data Field Size for an FT_1
+          frame that can be received by the NxPort."
+  ::= { fcFxLoginEntry 4 }
+
+  fcFxPortCosSuppAgreed OBJECT-TYPE
+      SYNTAX      FcCosCap
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A variable indicating that the attached NxPort has
+          requested the FxPort for the support of classes of services
+          and the FxPort has granted the request."
+  ::= { fcFxLoginEntry 5 }
+
+  fcFxPortIntermixSuppAgreed OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A variable indicating that the attached NxPort has
+          requested the FxPort for the support of Intermix and the
+          FxPort has granted the request. This flag is only valid if
+          Class 1 service is supported."
+  ::= { fcFxLoginEntry 6 }
+
+  fcFxPortStackedConnModeAgreed OBJECT-TYPE
+      SYNTAX      FcStackedConnMode
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A variable indicating whether the FxPort has agreed to
+          support stacked connect from the Fabric Login. This is only
+          meaningful if Class 1 service has been agreed."
+  ::= { fcFxLoginEntry 7 }
+
+  fcFxPortClass2SeqDelivAgreed OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A variable indicating whether the FxPort has agreed to
+          support Class 2 sequential delivery from the Fabric Login.
+          This is only meaningful if Class 2 service has been
+          agreed."
+  ::= { fcFxLoginEntry 8 }
+
+  fcFxPortClass3SeqDelivAgreed OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether the FxPort has agreed to support
+          Class 3 sequential delivery from the Fabric Login. This is
+          only meaningful if Class 3 service has been agreed."
+  ::= { fcFxLoginEntry 9 }
+
+  fcFxPortNxPortName OBJECT-TYPE
+      SYNTAX      FcNameId
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The port name of the attached NxPort."
+  ::= { fcFxLoginEntry 10 }
+
+  fcFxPortConnectedNxPort OBJECT-TYPE
+      SYNTAX      FcAddressId
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The address identifier of the destination NxPort with which
+          this FxPort is currently engaged in a either a Class 1 or
+          loop connection. If this FxPort is not engaged in a
+          connection, then the value of this object is '000000'H."
+  ::= { fcFxLoginEntry 11 }
+
+  fcFxPortBbCreditModel OBJECT-TYPE
+      SYNTAX      FcBbCreditModel
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "This object identifies the BB_Credit model used by the
+          FxPort."
+  ::= { fcFxLoginEntry 12 }
+
+  -- the Error group
+  -- This group consists of tables that contain information about
+  -- the various types of errors detected.  The management station
+  -- may use the information in this group to determine the
+  -- quality of the link between the FxPort and its attached NxPort.
+
+  -- the FxPort Error table
+  -- This table contains, one entry for each FxPort in the Fabric
+  -- Element, counters recording numbers of errors detected
+  -- since the management agent re-initialized.
+  -- The first 6 columnar objects after the port index corresponds
+  -- to the counters in the Link Error Status Block.
+
+  fcFxPortErrorTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortErrorEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort, counters
+          that record the numbers of errors detected."
+  ::= { fcFeError 1 }
+
+  fcFxPortErrorEntry OBJECT-TYPE
+      SYNTAX      FcFxPortErrorEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing error counters of a FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortErrorTable 1 }
+
+  FcFxPortErrorEntry ::=
+      SEQUENCE {
+          fcFxPortLinkFailures
+              Counter32,
+          fcFxPortSyncLosses
+              Counter32,
+          fcFxPortSigLosses
+              Counter32,
+          fcFxPortPrimSeqProtoErrors
+              Counter32,
+          fcFxPortInvalidTxWords
+              Counter32,
+          fcFxPortInvalidCrcs
+              Counter32,
+          fcFxPortDelimiterErrors
+              Counter32,
+          fcFxPortAddressIdErrors
+              Counter32,
+          fcFxPortLinkResetIns
+              Counter32,
+          fcFxPortLinkResetOuts
+              Counter32,
+          fcFxPortOlsIns
+              Counter32,
+          fcFxPortOlsOuts
+              Counter32
+      }
+
+  fcFxPortLinkFailures OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of link failures detected by this FxPort."
+  ::= { fcFxPortErrorEntry 1 }
+
+  fcFxPortSyncLosses OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of loss of synchronization detected by the
+          FxPort."
+  ::= { fcFxPortErrorEntry 2 }
+
+  fcFxPortSigLosses OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of loss of signal detected by the FxPort."
+  ::= { fcFxPortErrorEntry 3 }
+
+  fcFxPortPrimSeqProtoErrors OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of primitive sequence protocol errors detected
+          by the FxPort."
+  ::= { fcFxPortErrorEntry 4 }
+
+  fcFxPortInvalidTxWords OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of invalid transmission word detected by the
+          FxPort."
+  ::= { fcFxPortErrorEntry 5 }
+
+  fcFxPortInvalidCrcs OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of invalid CRC detected by this FxPort."
+  ::= { fcFxPortErrorEntry 6 }
+
+  fcFxPortDelimiterErrors OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Delimiter Errors detected by this FxPort."
+  ::= { fcFxPortErrorEntry 7 }
+
+  fcFxPortAddressIdErrors OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of address identifier errors detected by this
+
+          FxPort."
+  ::= { fcFxPortErrorEntry 8 }
+
+  fcFxPortLinkResetIns OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Link Reset Protocol received by this FxPort
+          from the attached NxPort."
+  ::= { fcFxPortErrorEntry 9 }
+
+  fcFxPortLinkResetOuts OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Link Reset Protocol issued by this FxPort to
+          the attached NxPort."
+  ::= { fcFxPortErrorEntry 10 }
+
+  fcFxPortOlsIns OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Offline Sequence received by this FxPort."
+  ::= { fcFxPortErrorEntry 11 }
+
+  fcFxPortOlsOuts OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Offline Sequence issued by this FxPort."
+  ::= { fcFxPortErrorEntry 12 }
+
+  -- Accounting Groups:
+  -- (1) Class 1 Accounting Group,
+  -- (2) Class 2 Accounting Group, and
+  -- (3) Class 3 Accounting Group.
+  -- Each group consists of a table that contains accounting
+  -- information for the FxPorts in the Fabric Element.
+
+  -- the Class 1 Accounting table
+  -- This table contains, one entry for each FxPort in the Fabric
+
+  -- Element, Counter32s for certain types of events occurred in the
+  -- the FxPorts since the the management agent has re-initialized.
+
+  fcFxPortC1AccountingTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortC1AccountingEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort in the
+          Fabric Element, Class 1 accounting information recorded
+          since the management agent has re-initialized."
+  ::= { fcFeAccounting 1 }
+
+  fcFxPortC1AccountingEntry OBJECT-TYPE
+      SYNTAX      FcFxPortC1AccountingEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing Class 1 accounting information for each
+          FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortC1AccountingTable 1 }
+
+  FcFxPortC1AccountingEntry ::=
+      SEQUENCE {
+          fcFxPortC1InFrames
+              Counter32,
+          fcFxPortC1OutFrames
+              Counter32,
+          fcFxPortC1InOctets
+              Counter32,
+          fcFxPortC1OutOctets
+              Counter32,
+          fcFxPortC1Discards
+              Counter32,
+          fcFxPortC1FbsyFrames
+              Counter32,
+          fcFxPortC1FrjtFrames
+              Counter32,
+          fcFxPortC1InConnections
+              Counter32,
+          fcFxPortC1OutConnections
+              Counter32,
+          fcFxPortC1ConnTime
+              MilliSeconds
+      }
+
+  fcFxPortC1InFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 frames (other than Class 1 connect-
+          request) received by this FxPort from its attached NxPort."
+  ::= { fcFxPortC1AccountingEntry 1 }
+
+  fcFxPortC1OutFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 frames (other than Class 1 connect-
+          request) delivered through this FxPort to its attached
+          NxPort."
+  ::= { fcFxPortC1AccountingEntry 2 }
+
+  fcFxPortC1InOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 frame octets, including the frame
+          delimiters,  received by this FxPort from its attached
+          NxPort."
+  ::= { fcFxPortC1AccountingEntry 3 }
+
+  fcFxPortC1OutOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 frame octets, including the frame
+          delimiters, delivered through this FxPort its attached
+          NxPort."
+  ::= { fcFxPortC1AccountingEntry 4 }
+
+  fcFxPortC1Discards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 frames discarded by this FxPort."
+  ::= { fcFxPortC1AccountingEntry 5 }
+
+  fcFxPortC1FbsyFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of F_BSY frames generated by this FxPort against
+          Class 1 connect-request."
+  ::= { fcFxPortC1AccountingEntry 6 }
+
+  fcFxPortC1FrjtFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of F_RJT frames generated by this FxPort against
+          Class 1 connect-request."
+  ::= { fcFxPortC1AccountingEntry 7 }
+
+  fcFxPortC1InConnections OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 connections successfully established
+          in which the attached NxPort is the source of the connect-
+          request."
+  ::= { fcFxPortC1AccountingEntry 8 }
+
+  fcFxPortC1OutConnections OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 1 connections successfully established
+          in which the attached NxPort is the destination of the
+          connect-request."
+  ::= { fcFxPortC1AccountingEntry 9 }
+
+  fcFxPortC1ConnTime OBJECT-TYPE
+      SYNTAX      MilliSeconds
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The cumulative time that this FxPort has been engaged in
+          Class 1 connection.  The amount of time is counted from
+          after a connect-request has been accepted until the
+          connection is disengaged, either by an EOFdt or Link
+          Reset."
+  ::= { fcFxPortC1AccountingEntry 10 }
+
+  -- the Class 2 Accounting table
+  -- This table contains, one entry for each FxPort in the Fabric
+  -- Element, Counter32s for certain types of events occurred in the
+  -- the FxPorts since the the management agent has re-initialized.
+
+  fcFxPortC2AccountingTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortC2AccountingEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort in the
+          Fabric Element, Class 2 accounting information recorded
+          since the management agent has re-initialized."
+  ::= { fcFeAccounting 2 }
+
+  fcFxPortC2AccountingEntry OBJECT-TYPE
+      SYNTAX      FcFxPortC2AccountingEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing Class 2 accounting information for each
+          FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortC2AccountingTable 1 }
+
+  FcFxPortC2AccountingEntry ::=
+      SEQUENCE {
+          fcFxPortC2InFrames
+              Counter32,
+          fcFxPortC2OutFrames
+                 Counter32,
+          fcFxPortC2InOctets
+                 Counter32,
+          fcFxPortC2OutOctets
+                 Counter32,
+          fcFxPortC2Discards
+                 Counter32,
+          fcFxPortC2FbsyFrames
+                 Counter32,
+          fcFxPortC2FrjtFrames
+                 Counter32
+      }
+
+  fcFxPortC2InFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 2 frames received by this FxPort from
+          its attached NxPort."
+  ::= { fcFxPortC2AccountingEntry 1 }
+
+  fcFxPortC2OutFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 2 frames delivered through this FxPort
+          to its attached NxPort."
+  ::= { fcFxPortC2AccountingEntry 2 }
+
+  fcFxPortC2InOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 2 frame octets, including the frame
+          delimiters, received by this FxPort from its attached
+          NxPort."
+  ::= { fcFxPortC2AccountingEntry 3 }
+
+  fcFxPortC2OutOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 2 frame octets, including the frame
+          delimiters, delivered through this FxPort to its attached
+          NxPort."
+  ::= { fcFxPortC2AccountingEntry 4 }
+
+  fcFxPortC2Discards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 2 frames discarded by this FxPort."
+  ::= { fcFxPortC2AccountingEntry 5 }
+
+  fcFxPortC2FbsyFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of F_BSY frames generated by this FxPort against
+          Class 2 frames."
+  ::= { fcFxPortC2AccountingEntry 6 }
+
+  fcFxPortC2FrjtFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of F_RJT frames generated by this FxPort against
+          Class 2 frames."
+  ::= { fcFxPortC2AccountingEntry 7 }
+
+  -- the Class 3 Accounting Group
+  -- This table contains, one entry for each FxPort in the Fabric
+  -- Element, Counter32s for certain types of events occurred in the
+  -- the FxPorts since the management agent has re-initialized.
+
+  fcFxPortC3AccountingTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortC3AccountingEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort in the
+          Fabric Element, Class 3 accounting information recorded
+          since the management agent has re-initialized."
+  ::= { fcFeAccounting 3 }
+
+  fcFxPortC3AccountingEntry OBJECT-TYPE
+      SYNTAX      FcFxPortC3AccountingEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing Class 3 accounting information for each
+          FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortC3AccountingTable 1 }
+
+  FcFxPortC3AccountingEntry ::=
+      SEQUENCE {
+          fcFxPortC3InFrames
+              Counter32,
+          fcFxPortC3OutFrames
+              Counter32,
+          fcFxPortC3InOctets
+
+              Counter32,
+          fcFxPortC3OutOctets
+              Counter32,
+          fcFxPortC3Discards
+              Counter32
+      }
+
+  fcFxPortC3InFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 3 frames received by this FxPort from
+          its attached NxPort."
+  ::= { fcFxPortC3AccountingEntry 1 }
+
+  fcFxPortC3OutFrames OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 3 frames delivered through this FxPort
+          to its attached NxPort."
+  ::= { fcFxPortC3AccountingEntry 2 }
+
+  fcFxPortC3InOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 3 frame octets, including the frame
+          delimiters, received by this FxPort from its attached
+          NxPort."
+  ::= { fcFxPortC3AccountingEntry 3 }
+
+  fcFxPortC3OutOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 3 frame octets, including the frame
+          delimiters, delivered through this FxPort to its attached
+          NxPort."
+  ::= { fcFxPortC3AccountingEntry 4 }
+
+  fcFxPortC3Discards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of Class 3 frames discarded by this FxPort."
+  ::= { fcFxPortC3AccountingEntry 5 }
+
+  -- The Capability Group - consists of a table describing
+  -- information about what each FxPort is inherently capable
+  -- of operating or supporting.
+  -- A capability may be used, as expressed in its respective
+  -- object value in the Configuration group.
+
+  fcFxPortCapTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF FcFxPortCapEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "A table that contains, one entry for each FxPort, the
+          capabilities of the port within the Fabric Element."
+  ::= { fcFeCapabilities 1 }
+
+  fcFxPortCapEntry OBJECT-TYPE
+      SYNTAX      FcFxPortCapEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An entry containing the Cap of a FxPort."
+      AUGMENTS { fcFxPortEntry }
+  ::= { fcFxPortCapTable 1 }
+
+  FcFxPortCapEntry ::=
+      SEQUENCE {
+          fcFxPortCapFcphVersionHigh
+              FcphVersion,
+          fcFxPortCapFcphVersionLow
+              FcphVersion,
+          fcFxPortCapBbCreditMax
+              FcBbCredit,
+          fcFxPortCapBbCreditMin
+              FcBbCredit,
+          fcFxPortCapRxDataFieldSizeMax
+              FcRxDataFieldSize,
+          fcFxPortCapRxDataFieldSizeMin
+              FcRxDataFieldSize,
+          fcFxPortCapCos
+              FcCosCap,
+          fcFxPortCapIntermix
+
+              TruthValue,
+          fcFxPortCapStackedConnMode
+              FcStackedConnMode,
+          fcFxPortCapClass2SeqDeliv
+              TruthValue,
+          fcFxPortCapClass3SeqDeliv
+              TruthValue,
+          fcFxPortCapHoldTimeMax
+              MicroSeconds,
+          fcFxPortCapHoldTimeMin
+              MicroSeconds
+      }
+
+  fcFxPortCapFcphVersionHigh OBJECT-TYPE
+      SYNTAX      FcphVersion
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The highest or most recent version of FC-PH that the FxPort
+          is capable of supporting."
+  ::= { fcFxPortCapEntry 1 }
+
+  fcFxPortCapFcphVersionLow OBJECT-TYPE
+      SYNTAX      FcphVersion
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The lowest or earliest version of FC-PH that the FxPort is
+          capable of supporting."
+  ::= { fcFxPortCapEntry 2 }
+
+  fcFxPortCapBbCreditMax OBJECT-TYPE
+      SYNTAX      FcBbCredit
+      UNITS       "buffers"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The maximum number of receive buffers available for holding
+          Class 1 connect-request, Class 2 or Class 3 frames from the
+          attached NxPort."
+  ::= { fcFxPortCapEntry 3 }
+
+  fcFxPortCapBbCreditMin OBJECT-TYPE
+      SYNTAX      FcBbCredit
+      UNITS       "buffers"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The minimum number of receive buffers available for holding
+          Class 1 connect-request, Class 2 or Class 3 frames from the
+          attached NxPort."
+  ::= { fcFxPortCapEntry 4 }
+
+  fcFxPortCapRxDataFieldSizeMax OBJECT-TYPE
+      SYNTAX      FcRxDataFieldSize
+      UNITS       "bytes"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The maximum size in bytes of the Data Field in a frame that
+          the FxPort is capable of receiving from its attached
+          NxPort."
+  ::= { fcFxPortCapEntry 5 }
+
+  fcFxPortCapRxDataFieldSizeMin OBJECT-TYPE
+      SYNTAX      FcRxDataFieldSize
+      UNITS       "bytes"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The minimum size in bytes of the Data Field in a frame that
+          the FxPort is capable of receiving from its attached
+          NxPort."
+  ::= { fcFxPortCapEntry 6 }
+
+  fcFxPortCapCos OBJECT-TYPE
+      SYNTAX      FcCosCap
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A value indicating the set of Classes of Service that the
+          FxPort is capable of supporting."
+  ::= { fcFxPortCapEntry 7 }
+
+  fcFxPortCapIntermix OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether or not the FxPort is capable of
+          supporting the intermixing of Class 2 and Class 3 frames
+          during a Class 1 connection. This flag is only valid if the
+          port is capable of supporting Class 1 service."
+  ::= { fcFxPortCapEntry 8 }
+
+  fcFxPortCapStackedConnMode OBJECT-TYPE
+      SYNTAX      FcStackedConnMode
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A value indicating the mode of Stacked Connect request that
+          the FxPort is capable of supporting."
+  ::= { fcFxPortCapEntry 9 }
+
+  fcFxPortCapClass2SeqDeliv OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether or not the FxPort is capable of
+          supporting Class 2 Sequential Delivery."
+  ::= { fcFxPortCapEntry 10 }
+
+  fcFxPortCapClass3SeqDeliv OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "A flag indicating whether or not the FxPort is capable of
+          supporting Class 3 Sequential Delivery."
+  ::= { fcFxPortCapEntry 11 }
+
+  fcFxPortCapHoldTimeMax OBJECT-TYPE
+      SYNTAX      MicroSeconds
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The maximum holding time (in microseconds) that the FxPort
+          is capable of supporting."
+  ::= { fcFxPortCapEntry 12 }
+
+  fcFxPortCapHoldTimeMin OBJECT-TYPE
+      SYNTAX      MicroSeconds
+      UNITS       "microseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The minimum holding time (in microseconds) that the FxPort
+          is capable of supporting."
+  ::= { fcFxPortCapEntry 13 }
+
+  -- conformance information
+
+  fcFeMIBConformance OBJECT IDENTIFIER  ::= { fcFeMIB 2 }
+  fcFeMIBCompliances  OBJECT IDENTIFIER ::= { fcFeMIBConformance 1 }
+  fcFeMIBGroups       OBJECT IDENTIFIER ::= { fcFeMIBConformance 2 }
+
+  -- compliance statements
+  fcFeMIBMinimumCompliance   MODULE-COMPLIANCE
+      STATUS   current
+      DESCRIPTION
+         "The minimum compliance statement for SNMP entities
+          which implement the FIBRE-CHANNEL-FE-MIB."
+      MODULE  -- this module
+      MANDATORY-GROUPS { fcFeConfigGroup, fcFeStatusGroup,
+                         fcFeErrorGroup }
+
+      OBJECT        fcFeFabricName
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFeElementName
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFeModuleName
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortAdminMode
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortPhysAdminStatus
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortPhysRttov
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortBbCreditModel
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+   ::= { fcFeMIBCompliances 1 }
+
+  fcFeMIBFullCompliance   MODULE-COMPLIANCE
+      STATUS   current
+      DESCRIPTION
+         "The full compliance statement for SNMP entities
+          which implement the FIBRE-CHANNEL-FE-MIB."
+      MODULE  -- this module
+      MANDATORY-GROUPS { fcFeConfigGroup, fcFeStatusGroup,
+                         fcFeErrorGroup,  fcFeCapabilitiesGroup }
+
+      GROUP fcFeClass1AccountingGroup
+      DESCRIPTION
+         "This group is mandatory for all fibre channel fabric
+          elements which support class 1 frames."
+
+      GROUP fcFeClass2AccountingGroup
+      DESCRIPTION
+         "This group is mandatory for all fibre channel fabric
+          elements which support class 2 frames."
+
+      GROUP fcFeClass3AccountingGroup
+      DESCRIPTION
+         "This group is mandatory for all fibre channel fabric
+          elements which support class 3 frames."
+
+      OBJECT        fcFeFabricName
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFeElementName
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFeModuleName
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortAdminMode
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortPhysAdminStatus
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortPhysRttov
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+
+      OBJECT        fcFxPortBbCreditModel
+      MIN-ACCESS    read-only
+      DESCRIPTION
+         "Write access is not required."
+   ::= { fcFeMIBCompliances 2 }
+
+   -- units of conformance
+   fcFeConfigGroup  OBJECT-GROUP
+      OBJECTS { fcFeFabricName, fcFeElementName, fcFeModuleCapacity,
+                fcFeModuleDescr, fcFeModuleObjectID,
+                fcFeModuleOperStatus, fcFeModuleLastChange,
+                fcFeModuleFxPortCapacity, fcFeModuleName,
+                fcFxPortName, fcFxPortFcphVersionHigh,
+                fcFxPortFcphVersionLow, fcFxPortBbCredit,
+                fcFxPortRxBufSize, fcFxPortRatov, fcFxPortEdtov,
+                fcFxPortCosSupported, fcFxPortIntermixSupported,
+                fcFxPortStackedConnMode, fcFxPortClass2SeqDeliv,
+                fcFxPortClass3SeqDeliv, fcFxPortHoldTime }
+      STATUS    current
+      DESCRIPTION
+         "A collection of objects providing the configuration and service
+          parameters of the Fabric Element, the modules, and FxPorts."
+   ::= { fcFeMIBGroups 1 }
+
+  fcFeStatusGroup  OBJECT-GROUP
+     OBJECTS { fcFxPortID, fcFxPortBbCreditAvailable,
+               fcFxPortOperMode, fcFxPortAdminMode,
+               fcFxPortPhysAdminStatus, fcFxPortPhysOperStatus,
+               fcFxPortPhysLastChange, fcFxPortPhysRttov,
+               fcFxPortFcphVersionAgreed, fcFxPortNxPortBbCredit,
+               fcFxPortNxPortRxDataFieldSize, fcFxPortCosSuppAgreed,
+               fcFxPortIntermixSuppAgreed,
+               fcFxPortStackedConnModeAgreed,
+               fcFxPortClass2SeqDelivAgreed,
+               fcFxPortClass3SeqDelivAgreed,
+               fcFxPortNxPortName, fcFxPortConnectedNxPort,
+               fcFxPortBbCreditModel }
+     STATUS    current
+     DESCRIPTION
+        "A collection of objects providing the operational status and
+         established service parameters for the Fabric Element and the
+         attached NxPorts."
+   ::= { fcFeMIBGroups 2 }
+
+   fcFeErrorGroup  OBJECT-GROUP
+      OBJECTS { fcFxPortLinkFailures, fcFxPortSyncLosses,
+                fcFxPortSigLosses, fcFxPortPrimSeqProtoErrors,
+                fcFxPortInvalidTxWords, fcFxPortInvalidCrcs,
+                fcFxPortDelimiterErrors, fcFxPortAddressIdErrors,
+                fcFxPortLinkResetIns, fcFxPortLinkResetOuts,
+                fcFxPortOlsIns, fcFxPortOlsOuts }
+      STATUS    current
+      DESCRIPTION
+         "A collection of objects providing various error
+          statistics detected by the FxPorts."
+   ::= { fcFeMIBGroups 3 }
+
+   fcFeClass1AccountingGroup  OBJECT-GROUP
+      OBJECTS { fcFxPortC1InFrames, fcFxPortC1OutFrames,
+                fcFxPortC1InOctets, fcFxPortC1OutOctets,
+                fcFxPortC1Discards, fcFxPortC1FbsyFrames,
+                fcFxPortC1FrjtFrames, fcFxPortC1InConnections,
+                fcFxPortC1OutConnections, fcFxPortC1ConnTime
+      }
+      STATUS    current
+      DESCRIPTION
+         "A collection of objects providing various class 1
+  performance statistics detected by the FxPorts."
+   ::= { fcFeMIBGroups 4 }
+
+   fcFeClass2AccountingGroup  OBJECT-GROUP
+      OBJECTS { fcFxPortC2InFrames, fcFxPortC2OutFrames,
+                fcFxPortC2InOctets, fcFxPortC2OutOctets,
+                fcFxPortC2Discards, fcFxPortC2FbsyFrames,
+                fcFxPortC2FrjtFrames
+      }
+      STATUS    current
+      DESCRIPTION
+         "A collection of objects providing various class 2
+  performance statistics detected by the FxPorts."
+   ::= { fcFeMIBGroups 5 }
+
+   fcFeClass3AccountingGroup  OBJECT-GROUP
+      OBJECTS { fcFxPortC3InFrames, fcFxPortC3OutFrames,
+                fcFxPortC3InOctets, fcFxPortC3OutOctets,
+                fcFxPortC3Discards
+      }
+      STATUS    current
+      DESCRIPTION
+         "A collection of objects providing various class 3
+          performance statistics detected by the FxPorts."
+   ::= { fcFeMIBGroups 6 }
+
+  fcFeCapabilitiesGroup  OBJECT-GROUP
+     OBJECTS { fcFxPortCapFcphVersionHigh, fcFxPortCapFcphVersionLow,
+               fcFxPortCapBbCreditMax, fcFxPortCapBbCreditMin,
+               fcFxPortCapRxDataFieldSizeMax,
+               fcFxPortCapRxDataFieldSizeMin,
+               fcFxPortCapCos, fcFxPortCapIntermix,
+               fcFxPortCapStackedConnMode, fcFxPortCapClass2SeqDeliv,
+               fcFxPortCapClass3SeqDeliv, fcFxPortCapHoldTimeMax,
+               fcFxPortCapHoldTimeMin
+     }
+     STATUS    current
+     DESCRIPTION
+        "A collection of objects providing the inherent
+         capability of each FxPort within the Fabric Element."
+   ::= { fcFeMIBGroups 7 }
+
+  END
diff --git a/snmp_builder/mibs/FLOW-METER-MIB.mib b/snmp_builder/mibs/FLOW-METER-MIB.mib
new file mode 100644
index 0000000..45e73cf
--- /dev/null
+++ b/snmp_builder/mibs/FLOW-METER-MIB.mib
@@ -0,0 +1,1901 @@
+FLOW-METER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Counter32, Counter64, Integer32, mib-2
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, TimeStamp, TruthValue
+        FROM SNMPv2-TC
+    OBJECT-GROUP, MODULE-COMPLIANCE
+        FROM SNMPv2-CONF
+    ifIndex
+        FROM IF-MIB
+    TimeFilter
+        FROM RMON2-MIB;
+
+flowMIB MODULE-IDENTITY
+    LAST-UPDATED "9910250000Z" -- October 25, 1999
+    ORGANIZATION "IETF Realtime Traffic Flow Measurement Working Group"
+    CONTACT-INFO
+        "Nevil Brownlee, The University of Auckland
+
+        Postal: Information Technology Sytems & Services
+                The University of Auckland
+                Private Bag 92-019
+                Auckland, New Zealand
+
+        Phone:  +64 9 373 7599 x8941
+        E-mail: n.brownlee@auckland.ac.nz"
+    DESCRIPTION
+        "MIB for the RTFM Traffic Flow Meter."
+
+    REVISION "9910250000Z"
+    DESCRIPTION
+        "Initial Version, published as RFC 2720."
+
+     REVISION "9908301250Z"
+     DESCRIPTION
+         "UTF8OwnerString Textual Convention added, and used to
+         replace OwnerString.  Conceptually the same as OwnerString,
+         but facilitating internationalisation by using UTF-8
+         encoding for its characters rather than US-ASCII."
+
+    REVISION "9908191010Z"
+    DESCRIPTION
+        "Changes to SIZE specification for two variables:
+          - flowRuleInfoName SIZE specified as (0..127)
+          - flowRuleIndex SIZE increased to (1..2147483647)"
+
+    REVISION "9712230937Z"
+    DESCRIPTION
+        "Two further variables deprecated:
+          - flowRuleInfoRulesReady (use flowRuleInfoStatus intead)
+          - flowDataStatus (contains no useful information)"
+
+    REVISION "9707071715Z"
+    DESCRIPTION
+        "Significant changes since RFC 2064 include:
+          - flowDataPackageTable added
+          - flowColumnActivityTable deprecated
+          - flowManagerCounterWrap deprecated"
+
+    REVISION "9603080208Z"
+    DESCRIPTION
+        "Initial version of this MIB (RFC 2064)"
+    ::= { mib-2 40 }
+
+flowControl         OBJECT IDENTIFIER ::= { flowMIB 1 }
+
+flowData            OBJECT IDENTIFIER ::= { flowMIB 2 }
+
+flowRules           OBJECT IDENTIFIER ::= { flowMIB 3 }
+
+flowMIBConformance  OBJECT IDENTIFIER ::= { flowMIB 4 }
+
+-- Textual Conventions
+
+UTF8OwnerString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "127t"
+    STATUS  current
+    DESCRIPTION
+        "An administratively assigned name for the owner of a
+        resource, conceptually the same as OwnerString in the RMON
+        MIB [RMON-MIB].
+
+        To facilitate internationalisation, this name information
+        is represented using the ISO/IEC IS 10646-1 character set,
+        encoded as an octet string using the UTF-8 transformation
+        format described in the UTF-8 standard [UTF-8]."
+    SYNTAX  OCTET STRING (SIZE (0..127))
+
+PeerType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Indicates the type of a PeerAddress (see below).  The values
+        used are from the 'Address Family Numbers' section of the
+        Assigned Numbers RFC [ASG-NBR].  Peer types from other address
+        families may also be used, provided only that they are
+        identified by their assigned Address Family numbers."
+    SYNTAX  INTEGER {
+        ipv4(1),
+        ipv6(2),
+        nsap(3),
+        ipx(11),
+        appletalk(12),
+        decnet(13) }
+
+PeerAddress ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Specifies the value of a peer address for various network
+        protocols.  Address format depends on the actual protocol,
+        as indicated below:
+
+        IPv4:        ipv4(1)
+            4-octet IpAddress  (defined in the SNMPv2 SMI [RFC2578])
+
+        IPv6:        ipv6(2)
+            16-octet IpAddress  (defined in the
+                                    IPv6 Addressing RFC [V6-ADDR])
+
+        CLNS:        nsap(3)
+            NsapAddress  (defined in the SNMPv2 SMI [RFC2578])
+
+        Novell:      ipx(11)
+
+            4-octet Network number,
+            6-octet Host number (MAC address)
+
+        AppleTalk:   appletalk(12)
+            2-octet Network number (sixteen bits),
+            1-octet Host number (eight bits)
+
+        DECnet:      decnet(13)
+            1-octet Area number (in low-order six bits),
+            2-octet Host number (in low-order ten bits)
+        "
+    SYNTAX OCTET STRING (SIZE (3..20))
+
+AdjacentType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Indicates the type of an adjacent address.  May be a medium
+        type or (if metering is taking place inside a tunnel) a
+        PeerType (see above).
+
+        The values used for IEEE 802 medium types are from the 'Network
+        Management Parameters (ifType definitions)' section of the
+        Assigned Numbers RFC [ASG-NBR].  Other medium types may also
+        be used, provided only that they are identified by their
+        assigned ifType numbers."
+    SYNTAX  INTEGER {
+        ip(1),
+        nsap(3),
+        ethernet(7),  -- ethernet-like [ENET-OBJ],
+                      --    includes ethernet-csmacd(6)
+        tokenring(9),
+        ipx(11),
+        appletalk(12),
+        decnet(13),
+        fddi(15) }
+
+AdjacentAddress ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Specifies the value of an adjacent address.  May be a Medium
+        Access Control (MAC) address or (if metering is taking place
+        inside a tunnel) a PeerAddress (see above).
+
+        MAC Address format depends on the actual medium, as follows:
+
+        Ethernet:     ethernet(7)
+            6-octet 802.3 MAC address in 'canonical' order
+
+        Token Ring:   tokenring(9)
+            6-octet 802.5 MAC address in 'canonical' order
+
+        FDDI:         fddi(15)
+            FddiMACLongAddress, i.e. a 6-octet MAC address
+            in 'canonical' order  (defined in [FDDI-MIB])
+        "
+    SYNTAX OCTET STRING (SIZE (3..20))
+
+TransportType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Indicates the type of a TransportAddress (see below).  Values
+        will depend on the actual protocol; for IP they will be those
+        given in the 'Protocol Numbers' section of the  Assigned Numbers
+        RFC [ASG-NBR], including icmp(1), tcp(6) and udp(17)."
+    SYNTAX  Integer32 (1..255)
+
+TransportAddress ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Specifies the value of a transport address for various
+        network protocols.  Format as follows:
+
+        IP:
+            2-octet UDP or TCP port number
+
+        Other protocols:
+            2-octet port number
+        "
+    SYNTAX OCTET STRING (SIZE (2))
+
+RuleAddress ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Specifies the value of an address.  Is a superset of
+        MediumAddress, PeerAddress and TransportAddress."
+    SYNTAX OCTET STRING (SIZE (2..20))
+
+FlowAttributeNumber ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Uniquely identifies an attribute within a flow data record."
+    SYNTAX  INTEGER {
+        flowIndex(1),
+        flowStatus(2),
+        flowTimeMark(3),
+        sourceInterface(4),
+        sourceAdjacentType(5),
+        sourceAdjacentAddress(6),
+        sourceAdjacentMask(7),
+        sourcePeerType(8),
+        sourcePeerAddress(9),
+        sourcePeerMask(10),
+        sourceTransType(11),
+        sourceTransAddress(12),
+        sourceTransMask(13),
+        destInterface(14),
+        destAdjacentType(15),
+        destAdjacentAddress(16),
+        destAdjacentMask(17),
+        destPeerType(18),
+        destPeerAddress(19),
+        destPeerMask(20),
+        destTransType(21),
+        destTransAddress(22),
+        destTransMask(23),
+        pduScale(24),
+        octetScale(25),
+        ruleSet(26),
+        toOctets(27),             -- Source-to-Dest
+        toPDUs(28),
+        fromOctets(29),           -- Dest-to-Source
+        fromPDUs(30),
+        firstTime(31),            -- Activity times
+        lastActiveTime(32),
+        sourceSubscriberID(33),   -- Subscriber ID
+        destSubscriberID(34),
+        sessionID(35),
+        sourceClass(36),          -- Computed attributes
+        destClass(37),
+        flowClass(38),
+        sourceKind(39),
+        destKind(40),
+        flowKind(41) }
+
+RuleAttributeNumber ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Uniquely identifies an attribute which may be tested in
+
+        a rule.  These include attributes whose values come directly
+        from (or are computed from) the flow's packets, and the five
+        'meter' variables used to hold an Attribute Number."
+    SYNTAX  INTEGER {
+        null(0),
+        sourceInterface(4),       -- Source Address
+        sourceAdjacentType(5),
+        sourceAdjacentAddress(6),
+        sourcePeerType(8),
+        sourcePeerAddress(9),
+        sourceTransType(11),
+        sourceTransAddress(12),
+        destInterface(14),        -- Dest Address
+        destAdjacentType(15),
+        destAdjacentAddress(16),
+        destPeerType(18),
+        destPeerAddress(19),
+        destTransType(21),
+        destTransAddress(22),
+        sourceSubscriberID(33),   -- Subscriber ID
+        destSubscriberID(34),
+        sessionID(35),
+        sourceClass(36),          -- Computed attributes
+        destClass(37),
+        flowClass(38),
+        sourceKind(39),
+        destKind(40),
+        flowKind(41),
+        matchingStoD(50),         -- Packet matching
+
+        v1(51),                   -- Meter variables
+        v2(52),
+        v3(53),
+        v4(54),
+        v5(55) }
+
+ActionNumber ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Uniquely identifies the action of a rule, i.e. the Pattern
+        Matching Engine's opcode number.  Details of the opcodes
+        are given in the 'Traffic Flow Measurement: Architecture'
+        document [RTFM-ARC]."
+    SYNTAX  INTEGER {
+
+        ignore(1),
+        noMatch(2),
+        count(3),
+        countPkt(4),
+        return(5),
+        gosub(6),
+        gosubAct(7),
+        assign(8),
+        assignAct(9),
+        goto(10),
+        gotoAct(11),
+        pushRuleTo(12),
+        pushRuleToAct(13),
+        pushPktTo(14),
+        pushPktToAct(15),
+        popTo(16),
+        popToAct(17) }
+
+--
+-- Control Group:  RuleSet Info Table
+--
+
+flowRuleSetInfoTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowRuleSetInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An array of information about the RuleSets held in the
+        meter.
+
+        Any manager may configure a new RuleSet for the meter by
+        creating a row in this table with status active(1), and setting
+        values for all the objects in its rules.  At this stage the new
+        RuleSet is available but not 'running', i.e. it is not being
+        used by the meter to produce entries in the flow table.
+
+        To actually 'run' a RuleSet a manager must create a row in
+        the flowManagerInfoTable, set it's flowManagerStatus to
+        active(1), and set either its CurrentRuleSet or StandbyRuleSet
+        to point to the RuleSet to be run.
+
+        Once a RuleSet is running a manager may not change any of the
+        objects within the RuleSet itself.  Any attempt to do so should
+        result in a notWritable(17) SNMP error-status for such objects.
+
+        A manager may stop a RuleSet running by removing all
+        references to it in the flowManagerInfoTable (i.e. by setting
+        CurrentRuleSet and StandbyRuleSet values to 0).  This provides
+
+        a way to stop RuleSets left running if a manager fails.
+        For example, when a manager is started, it could search the
+        meter's flowManager table and stop all RuleSets having a
+        specified value of flowRuleInfoOwner.
+
+        To prevent a manager from interfering with variables belonging
+        to another manager, the meter should use MIB views [RFC2575] so
+        as to limit each manager's access to the meter's variables,
+        effectively dividing the single meter into several virtual
+        meters, one for each independent manager."
+    ::= { flowControl 1 }
+
+flowRuleSetInfoEntry OBJECT-TYPE
+    SYNTAX  FlowRuleSetInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Information about a particular RuleSet."
+    INDEX  { flowRuleInfoIndex }
+    ::= { flowRuleSetInfoTable 1 }
+
+FlowRuleSetInfoEntry ::= SEQUENCE {
+    flowRuleInfoIndex         Integer32,
+    flowRuleInfoSize          Integer32,
+    flowRuleInfoOwner         UTF8OwnerString,
+    flowRuleInfoTimeStamp     TimeStamp,
+    flowRuleInfoStatus        RowStatus,
+    flowRuleInfoName          OCTET STRING,
+    flowRuleInfoRulesReady    TruthValue,
+    flowRuleInfoFlowRecords   Integer32
+    }
+
+flowRuleInfoIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An index which selects an entry in the flowRuleSetInfoTable.
+        Each such entry contains control information for a particular
+        RuleSet which the meter may run."
+    ::= { flowRuleSetInfoEntry 1 }
+
+flowRuleInfoSize OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Number of rules in this RuleSet.  Setting this variable will
+
+        cause the meter to allocate space for these rules."
+    ::= { flowRuleSetInfoEntry 2 }
+
+flowRuleInfoOwner OBJECT-TYPE
+    SYNTAX  UTF8OwnerString
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Identifies the manager which 'owns' this RuleSet.  A manager
+        must set this variable when creating a row in this table."
+    ::= { flowRuleSetInfoEntry 3 }
+
+flowRuleInfoTimeStamp OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Time this row's associated RuleSet was last changed."
+    ::= { flowRuleSetInfoEntry 4 }
+
+flowRuleInfoStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "The status of this flowRuleSetInfoEntry. If this value is
+        not active(1) the meter must not attempt to use the row's
+        associated RuleSet.  Once its value has been set to active(1)
+        a manager may not change any of the other variables in the
+        row, nor the contents of the associated RuleSet.  Any attempt
+        to do so should result in a notWritable(17) SNMP error-status
+        for such variables or objects.
+
+        To download a RuleSet, a manger could:
+           - Locate an open slot in the RuleSetInfoTable.
+           - Create a RuleSetInfoEntry by setting the status for this
+               open slot to createAndWait(5).
+           - Set flowRuleInfoSize and flowRuleInfoName as required.
+           - Download the rules into the row's rule table.
+           - Set flowRuleInfoStatus to active(1).
+
+        The RuleSet would then be ready to run. The manager is not
+        allowed to change the value of flowRuleInfoStatus from
+        active(1) if the associated RuleSet is being referenced by any
+        of the entries in the flowManagerInfoTable.
+
+        Setting RuleInfoStatus to destroy(6) destroys the associated
+        RuleSet together with any flow data collected by it."
+    ::= { flowRuleSetInfoEntry 5 }
+
+flowRuleInfoName OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (0..127))
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "An alphanumeric identifier used by managers and readers to
+        identify a RuleSet.  For example, a manager wishing to run a
+        RuleSet named WWW-FLOWS could search the flowRuleSetInfoTable
+        to see whether the WWW-FLOWS RuleSet is already available on
+        the meter.
+
+        Note that references to RuleSets in the flowManagerInfoTable
+        use indexes for their flowRuleSetInfoTable entries.  These may
+        be different each time the RuleSet is loaded into a meter."
+    ::= { flowRuleSetInfoEntry 6 }
+
+flowRuleInfoRulesReady OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-create
+    STATUS  deprecated
+    DESCRIPTION
+        "Indicates whether the rules for this row's associated RuleSet
+        are ready for use.  The meter will refuse to 'run' the RuleSet
+        unless this variable has been set to true(1).
+        While RulesReady is false(2), the manager may modify the
+        RuleSet, for example by downloading rules into it."
+    ::= { flowRuleSetInfoEntry 7 }
+
+flowRuleInfoFlowRecords OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The number of entries in the flow table for this RuleSet.
+        These may be current (waiting for collection by one or more
+        meter readers) or idle (waiting for the meter to recover
+        their memory)."
+    ::= { flowRuleSetInfoEntry 8 }
+
+--
+-- Control Group:  Interface Info Table
+--
+
+flowInterfaceTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An array of information specific to each meter interface."
+    ::= { flowControl 2 }
+
+flowInterfaceEntry OBJECT-TYPE
+    SYNTAX  FlowInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Information about a particular interface."
+    INDEX   { ifIndex }
+    ::= { flowInterfaceTable 1 }
+
+FlowInterfaceEntry ::= SEQUENCE {
+    flowInterfaceSampleRate   Integer32,
+    flowInterfaceLostPackets  Counter32
+    }
+
+flowInterfaceSampleRate OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The parameter N for statistical counting on this interface.
+        Set to N to count 1/Nth of the packets appearing at this
+        interface.  A sampling rate of 1 counts all packets.
+        A sampling rate of 0 results in the interface being ignored
+        by the meter.
+
+        A meter should choose its own algorithm to introduce variance
+        into the sampling so that exactly every Nth packet is counted.
+        The IPPM Working Group's RFC 'Framework for IP Performance
+        Metrics' [IPPM-FRM] explains why this should be done, and sets
+        out an algorithm for doing it."
+    DEFVAL { 1 }
+    ::= { flowInterfaceEntry 1 }
+
+flowInterfaceLostPackets OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The number of packets the meter has lost for this interface.
+        Such losses may occur because the meter has been unable to
+        keep up with the traffic volume."
+    ::= { flowInterfaceEntry 2 }
+
+--
+-- Control Group:  Meter Reader Info Table
+--
+
+-- Any meter reader wishing to collect data reliably for flows
+-- should first create a row in this table.  It should write that
+-- row's flowReaderLastTime object each time it starts a collection
+-- pass through the flow table.
+
+-- If a meter reader (MR) does not create a row in this table, e.g.
+-- because its MIB view [RFC2575] did not allow MR create access to
+-- flowReaderStatus, collection can still proceed but the meter will
+-- not be aware of meter reader MR.  This could lead the meter to
+-- recover flows before they have been collected by MR.
+
+flowReaderInfoTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowReaderInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An array of information about meter readers which have
+        registered their intent to collect flow data from this meter."
+    ::= { flowControl 3 }
+
+flowReaderInfoEntry OBJECT-TYPE
+    SYNTAX  FlowReaderInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Information about a particular meter reader."
+    INDEX  { flowReaderIndex }
+    ::= { flowReaderInfoTable 1 }
+
+FlowReaderInfoEntry ::= SEQUENCE {
+    flowReaderIndex            Integer32,
+    flowReaderTimeout          Integer32,
+    flowReaderOwner            UTF8OwnerString,
+    flowReaderLastTime         TimeStamp,
+    flowReaderPreviousTime     TimeStamp,
+    flowReaderStatus           RowStatus,
+    flowReaderRuleSet          Integer32
+    }
+
+flowReaderIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An index which selects an entry in the flowReaderInfoTable."
+    ::= { flowReaderInfoEntry 1 }
+
+flowReaderTimeout OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Specifies the maximum time (in seconds) between flow data
+        collections for this meter reader.  If this time elapses
+        without a collection, the meter should assume that this meter
+        reader has stopped collecting, and delete this row from the
+        table.  A value of zero indicates that this row should not be
+        timed out."
+    ::= { flowReaderInfoEntry 2 }
+
+flowReaderOwner OBJECT-TYPE
+    SYNTAX  UTF8OwnerString
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Identifies the meter reader which created this row."
+    ::= { flowReaderInfoEntry 3 }
+
+flowReaderLastTime OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Time this meter reader began its most recent data collection.
+
+        This variable should be written by a meter reader as its first
+        step in reading flow data.  The meter will set this LastTime
+        value to its current Uptime, and set its PreviousTime value
+        (below) to the old  LastTime.  This allows the meter to
+        recover flows which have been inactive since PreviousTime,
+        for these have been collected at least once.
+
+        If the meter reader fails to write flowLastReadTime, collection
+        may still proceed but the meter may not be able to recover
+        inactive flows until the flowReaderTimeout has been reached
+        for this entry."
+    ::= { flowReaderInfoEntry 4 }
+
+flowReaderPreviousTime OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Time this meter reader began the collection before last."
+    ::= { flowReaderInfoEntry 5 }
+
+flowReaderStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "The status of this FlowReaderInfoEntry. A value of active(1)
+        implies that the associated reader should be collecting data
+        from the meter.  Once this variable has been set to active(1)
+        a manager may only change this row's flowReaderLastTime and
+        flowReaderTimeout variables."
+    ::= { flowReaderInfoEntry 6 }
+
+flowReaderRuleSet OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "An index to the array of RuleSets.  Specifies a set of rules
+        of interest to this meter reader.  The reader will attempt to
+        collect any data generated by the meter for this RuleSet, and
+        the meter will not recover the memory of any of the RuleSet's
+        flows until this collection has taken place.  Note that a
+        reader may have entries in this table for several RuleSets."
+    ::= { flowReaderInfoEntry 7 }
+
+--
+-- Control Group:  Manager Info Table
+--
+
+-- Any manager wishing to run a RuleSet must create a row in this
+-- table.  Once it has a table row, the manager may set the control
+-- variables in its row so as to cause the meter to run any valid
+-- RuleSet held by the meter.
+
+-- A single manager may run several RuleSets; it must create a row
+-- in this table for each of them.  In short, each row of this table
+-- describes (and controls) a 'task' which the meter is executing.
+
+flowManagerInfoTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowManagerInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An array of information about managers which have
+
+        registered their intent to run RuleSets on this meter."
+    ::= { flowControl 4 }
+
+flowManagerInfoEntry OBJECT-TYPE
+    SYNTAX  FlowManagerInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Information about a particular meter 'task.'  By creating
+        an entry in this table and activating it, a manager requests
+        that the meter 'run' the indicated RuleSet.
+
+        The entry also specifies a HighWaterMark and a StandbyRuleSet.
+        If the meter's flow table usage exceeds this task's
+        HighWaterMark the meter will stop running the task's
+        CurrentRuleSet and switch to its StandbyRuleSet.
+
+        If the value of the task's StandbyRuleSet is 0 when its
+        HighWaterMark is exceeded, the meter simply stops running the
+        task's CurrentRuleSet.  By careful selection of HighWaterMarks
+        for the various tasks a manager can ensure that the most
+        critical RuleSets are the last to stop running as the number
+        of flows increases.
+
+        When a manager has determined that the demand for flow table
+        space has abated, it may cause the task to switch back to its
+        CurrentRuleSet by setting its flowManagerRunningStandby
+        variable to false(2)."
+    INDEX  { flowManagerIndex }
+    ::= { flowManagerInfoTable 1 }
+
+FlowManagerInfoEntry ::= SEQUENCE {
+    flowManagerIndex           Integer32,
+    flowManagerCurrentRuleSet  Integer32,
+    flowManagerStandbyRuleSet  Integer32,
+    flowManagerHighWaterMark   Integer32,
+    flowManagerCounterWrap     INTEGER,
+    flowManagerOwner           UTF8OwnerString,
+    flowManagerTimeStamp       TimeStamp,
+    flowManagerStatus          RowStatus,
+    flowManagerRunningStandby  TruthValue
+    }
+
+flowManagerIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An index which selects an entry in the flowManagerInfoTable."
+    ::= { flowManagerInfoEntry 1 }
+
+flowManagerCurrentRuleSet OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Index to the array of RuleSets.  Specifies which set of
+        rules is the 'current' one for this task.  The meter will
+        be 'running' the current RuleSet if this row's
+        flowManagerRunningStandby value is false(2).
+
+        When the manager sets this variable the meter will stop using
+        the task's old current RuleSet and start using the new one.
+        Specifying RuleSet 0 (the empty set) stops flow measurement
+        for this task."
+    ::= { flowManagerInfoEntry 2 }
+
+flowManagerStandbyRuleSet OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Index to the array of RuleSets.  After reaching HighWaterMark
+        (see below) the manager will switch to using the task's
+        StandbyRuleSet in place of its CurrentRuleSet.  For this to be
+        effective the designated StandbyRuleSet should have a coarser
+        reporting granularity then the CurrentRuleSet.  The manager may
+        also need to decrease the meter reading interval so that the
+        meter can recover flows measured by this task's CurrentRuleSet."
+    DEFVAL { 0 }  -- No standby
+    ::= { flowManagerInfoEntry 3 }
+
+flowManagerHighWaterMark OBJECT-TYPE
+    SYNTAX  Integer32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "A value expressed as a percentage, interpreted by the meter
+        as an indication of how full the flow table should be before
+        it should switch to the standby RuleSet (if one has been
+        specified) for this task.  Values of 0% or 100% disable the
+        checking represented by this variable."
+    ::= { flowManagerInfoEntry 4 }
+
+flowManagerCounterWrap OBJECT-TYPE
+    SYNTAX  INTEGER { wrap(1), scale(2) }
+    MAX-ACCESS  read-create
+    STATUS  deprecated
+    DESCRIPTION
+        "Specifies whether PDU and octet counters should wrap when
+        they reach the top of their range (normal behaviour for
+        Counter64 objects), or whether their scale factors should
+        be used instead.  The combination of counter and scale
+        factor allows counts to be returned as non-negative binary
+        floating point numbers, with 64-bit mantissas and 8-bit
+        exponents."
+    DEFVAL { wrap }
+    ::= { flowManagerInfoEntry 5 }
+
+flowManagerOwner OBJECT-TYPE
+    SYNTAX  UTF8OwnerString
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Identifies the manager which created this row."
+    ::= { flowManagerInfoEntry 6 }
+
+flowManagerTimeStamp OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Time this row was last changed by its manager."
+    ::= { flowManagerInfoEntry 7 }
+
+flowManagerStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "The status of this row in the flowManagerInfoTable.  A value
+        of active(1) implies that this task may be activated, by
+        setting its CurrentRuleSet and StandbyRuleSet variables.
+        Its HighWaterMark and RunningStandby variables may also be
+        changed."
+    ::= { flowManagerInfoEntry 8 }
+
+flowManagerRunningStandby OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+        "Set to true(1) by the meter to indicate that it has switched
+        to runnning this task's StandbyRuleSet in place of its
+
+        CurrentRuleSet.  To switch back to the CurrentRuleSet, the
+        manager may simply set this variable to false(2)."
+    DEFVAL { false }
+    ::= { flowManagerInfoEntry 9 }
+
+--
+-- Control Group:  General Meter Control Variables
+--
+
+flowFloodMark OBJECT-TYPE
+    SYNTAX  Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "A value expressed as a percentage, interpreted by the meter
+        as an indication of how full the flow table should be before
+        it should take some action to avoid running out of resources
+        to handle new flows, as discussed in section 4.6 (Handling
+        Increasing Traffic Levels) of the RTFM Architecture RFC
+        [RTFM-ARC].
+
+        Values of 0% or 100% disable the checking represented by
+        this variable."
+    DEFVAL { 95 } -- Enabled by default.
+    ::= { flowControl 5 }
+
+flowInactivityTimeout OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The time in seconds since the last packet seen, after which
+        a flow becomes 'idle.'  Note that although a flow may be
+        idle, it will not be discarded (and its memory recovered)
+        until after its data has been collected by all the meter
+        readers registered for its RuleSet."
+    DEFVAL { 600 } -- 10 minutes
+    ::= { flowControl 6 }
+
+flowActiveFlows OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The number of flows which are currently in use."
+    ::= { flowControl 7 }
+
+flowMaxFlows OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The maximum number of flows allowed in the meter's
+        flow table.  At present this is determined when the meter
+        is first started up."
+    ::= { flowControl 8 }
+
+flowFloodMode OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "Indicates that the meter has passed its FloodMark and is
+        not running in its normal mode.
+
+        When the manager notices this it should take action to remedy
+        the problem which caused the flooding.  It should then monitor
+        flowActiveFlows so as to determine when the flood has receded.
+        At that point the manager may set flowFloodMode to false(2) to
+        resume normal operation."
+    ::= { flowControl 9 }
+
+--
+-- The Flow Table
+--
+
+-- This is a table kept by a meter, with one flow data entry for every
+-- flow being measured.  Each flow data entry stores the attribute
+-- values for a traffic flow.  Details of flows and their attributes
+-- are given in the 'Traffic Flow Measurement: Architecture'
+-- document [RTFM-ARC].
+
+-- From time to time a meter reader may sweep the flow table so as
+-- to read counts.  This is most effectively achieved by using the
+-- TimeMark variable together with successive GetBulk requests to
+-- retrieve the values of the desired flow attribute variables.
+
+-- This scheme allows multiple meter readers to independently use the
+-- same meter; the meter readers do not have to be synchronised and
+-- they may use different collection intervals.
+
+-- If identical sets of counts are required from a meter, a manager
+-- could achieve this using two identical copies of a RuleSet in that
+-- meter and switching back and forth between them.  This is discussed
+-- further in the RTFM Architecture document [RTFM-ARC].
+
+flowDataTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The list of all flows being measured."
+    ::= { flowData 1 }
+
+flowDataEntry OBJECT-TYPE
+    SYNTAX  FlowDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The flow data record for a particular flow."
+    INDEX { flowDataRuleSet, flowDataTimeMark, flowDataIndex }
+    ::= { flowDataTable 1 }
+
+FlowDataEntry ::= SEQUENCE {
+    flowDataIndex                   Integer32,
+    flowDataTimeMark                TimeFilter,
+    flowDataStatus                  INTEGER,
+    flowDataSourceInterface         Integer32,
+    flowDataSourceAdjacentType      AdjacentType,
+    flowDataSourceAdjacentAddress   AdjacentAddress,
+    flowDataSourceAdjacentMask      AdjacentAddress,
+    flowDataSourcePeerType          PeerType,
+    flowDataSourcePeerAddress       PeerAddress,
+    flowDataSourcePeerMask          PeerAddress,
+    flowDataSourceTransType         TransportType,
+    flowDataSourceTransAddress      TransportAddress,
+    flowDataSourceTransMask         TransportAddress,
+    flowDataDestInterface           Integer32,
+    flowDataDestAdjacentType        AdjacentType,
+    flowDataDestAdjacentAddress     AdjacentAddress,
+    flowDataDestAdjacentMask        AdjacentAddress,
+    flowDataDestPeerType            PeerType,
+    flowDataDestPeerAddress         PeerAddress,
+    flowDataDestPeerMask            PeerAddress,
+    flowDataDestTransType           TransportType,
+    flowDataDestTransAddress        TransportAddress,
+    flowDataDestTransMask           TransportAddress,
+    flowDataPDUScale                Integer32,
+    flowDataOctetScale              Integer32,
+    flowDataRuleSet                 Integer32,
+    flowDataToOctets                Counter64,    -- Source->Dest
+    flowDataToPDUs                  Counter64,
+    flowDataFromOctets              Counter64,    -- Dest->Source
+    flowDataFromPDUs                Counter64,
+    flowDataFirstTime               TimeStamp,    -- Activity times
+    flowDataLastActiveTime          TimeStamp,
+    flowDataSourceSubscriberID      OCTET STRING,
+    flowDataDestSubscriberID        OCTET STRING,
+    flowDataSessionID               OCTET STRING,
+    flowDataSourceClass             Integer32,
+    flowDataDestClass               Integer32,
+    flowDataClass                   Integer32,
+    flowDataSourceKind              Integer32,
+    flowDataDestKind                Integer32,
+    flowDataKind                    Integer32
+    }
+
+flowDataIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Value of this flow data record's index within the meter's
+        flow table."
+    ::= { flowDataEntry 1 }
+
+flowDataTimeMark OBJECT-TYPE
+    SYNTAX  TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A TimeFilter for this entry.  Allows GetNext and GetBulk
+        to find flow table rows which have changed since a specified
+        value of the meter's Uptime."
+    ::= { flowDataEntry 2 }
+
+flowDataStatus OBJECT-TYPE
+    SYNTAX  INTEGER { inactive(1), current(2) }
+    MAX-ACCESS  read-only
+    STATUS  deprecated
+    DESCRIPTION
+        "Status of this flow data record."
+    ::= { flowDataEntry 3 }
+
+flowDataSourceInterface OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Index of the interface associated with the source address
+        for this flow.  It's value is one of those contained in the
+        ifIndex field of the meter's interfaces table."
+    ::= { flowDataEntry 4 }
+
+flowDataSourceAdjacentType OBJECT-TYPE
+    SYNTAX  AdjacentType
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Adjacent address type of the source for this flow.
+
+        If metering is being performed at the network level,
+        AdjacentType will indicate the medium for the interface on
+        which the flow was observed and AdjacentAddress will be the
+        MAC address for that interface.  This is the usual case.
+
+        If traffic is being metered inside a tunnel, AdjacentType will
+        be the peer type of the host at the end of the tunnel and
+        AdjacentAddress will be the peer address for that host."
+    ::= { flowDataEntry 5 }
+
+flowDataSourceAdjacentAddress OBJECT-TYPE
+    SYNTAX  AdjacentAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Address of the adjacent device on the path for the source
+        for this flow."
+    ::= { flowDataEntry 6 }
+
+flowDataSourceAdjacentMask OBJECT-TYPE
+    SYNTAX  AdjacentAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "1-bits in this mask indicate which bits must match when
+        comparing the adjacent source address for this flow."
+    ::= { flowDataEntry 7 }
+
+flowDataSourcePeerType OBJECT-TYPE
+    SYNTAX  PeerType
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Peer address type of the source for this flow."
+    ::= { flowDataEntry 8 }
+
+flowDataSourcePeerAddress OBJECT-TYPE
+    SYNTAX  PeerAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Address of the peer device for the source of this flow."
+    ::= { flowDataEntry 9 }
+
+flowDataSourcePeerMask OBJECT-TYPE
+    SYNTAX  PeerAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "1-bits in this mask indicate which bits must match when
+        comparing the source peer address for this flow."
+    ::= { flowDataEntry 10 }
+
+flowDataSourceTransType OBJECT-TYPE
+    SYNTAX  TransportType
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Transport address type of the source for this flow.  The
+        value of this attribute will depend on the peer address type."
+    ::= { flowDataEntry 11 }
+
+flowDataSourceTransAddress OBJECT-TYPE
+    SYNTAX  TransportAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Transport address for the source of this flow."
+    ::= { flowDataEntry 12 }
+
+flowDataSourceTransMask OBJECT-TYPE
+    SYNTAX  TransportAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "1-bits in this mask indicate which bits must match when
+        comparing the transport source address for this flow."
+    ::= { flowDataEntry 13 }
+
+flowDataDestInterface OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Index of the interface associated with the dest address for
+        this flow.  This value is one of the values contained in the
+        ifIndex field of the interfaces table."
+    ::= { flowDataEntry 14 }
+
+flowDataDestAdjacentType OBJECT-TYPE
+    SYNTAX  AdjacentType
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Adjacent address type of the destination for this flow."
+    ::= { flowDataEntry 15 }
+
+flowDataDestAdjacentAddress OBJECT-TYPE
+    SYNTAX  AdjacentAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Address of the adjacent device on the path for the
+        destination for this flow."
+    ::= { flowDataEntry 16 }
+
+flowDataDestAdjacentMask OBJECT-TYPE
+    SYNTAX  AdjacentAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "1-bits in this mask indicate which bits must match when
+        comparing the adjacent destination address for this flow."
+    ::= { flowDataEntry 17 }
+
+flowDataDestPeerType OBJECT-TYPE
+    SYNTAX  PeerType
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Peer address type of the destination for this flow."
+    ::= { flowDataEntry 18 }
+
+flowDataDestPeerAddress OBJECT-TYPE
+    SYNTAX  PeerAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Address of the peer device for the destination of this flow."
+    ::= { flowDataEntry 19 }
+
+flowDataDestPeerMask OBJECT-TYPE
+    SYNTAX  PeerAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "1-bits in this mask indicate which bits must match when
+        comparing the destination peer type for this flow."
+    ::= { flowDataEntry 20 }
+
+flowDataDestTransType OBJECT-TYPE
+    SYNTAX  TransportType
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Transport address type of the destination for this flow.  The
+        value of this attribute will depend on the peer address type."
+    ::= { flowDataEntry 21 }
+
+flowDataDestTransAddress OBJECT-TYPE
+    SYNTAX  TransportAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Transport address for the destination of this flow."
+    ::= { flowDataEntry 22 }
+
+flowDataDestTransMask OBJECT-TYPE
+    SYNTAX  TransportAddress
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "1-bits in this mask indicate which bits must match when
+        comparing the transport destination address for this flow."
+    ::= { flowDataEntry 23 }
+
+flowDataPDUScale OBJECT-TYPE
+    SYNTAX  Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The scale factor applied to this particular flow.  Indicates
+        the number of bits the PDU counter values should be moved left
+        to obtain the actual values."
+    ::= { flowDataEntry 24 }
+
+flowDataOctetScale OBJECT-TYPE
+    SYNTAX  Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The scale factor applied to this particular flow.  Indicates
+        the number of bits the octet counter values should be moved
+        left to obtain the actual values."
+    ::= { flowDataEntry 25 }
+
+flowDataRuleSet OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The RuleSet number of the RuleSet which created this flow.
+        Allows a manager to use GetNext or GetBulk requests to find
+        flows belonging to a particular RuleSet."
+    ::= { flowDataEntry 26 }
+
+flowDataToOctets OBJECT-TYPE
+    SYNTAX  Counter64
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The count of octets flowing from source to destination
+        for this flow."
+    ::= { flowDataEntry 27 }
+
+flowDataToPDUs OBJECT-TYPE
+    SYNTAX  Counter64
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The count of packets flowing from source to destination
+        for this flow."
+    ::= { flowDataEntry 28 }
+
+flowDataFromOctets OBJECT-TYPE
+    SYNTAX  Counter64
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The count of octets flowing from destination to source
+        for this flow."
+    ::= { flowDataEntry 29 }
+
+flowDataFromPDUs OBJECT-TYPE
+    SYNTAX  Counter64
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The count of packets flowing from destination to source
+        for this flow."
+    ::= { flowDataEntry 30 }
+
+flowDataFirstTime OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The time at which this flow was first entered in the table"
+    ::= { flowDataEntry 31 }
+
+flowDataLastActiveTime OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The last time this flow had activity, i.e. the time of
+        arrival of the most recent PDU belonging to this flow."
+    ::= { flowDataEntry 32 }
+
+flowDataSourceSubscriberID OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (4..20))
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Subscriber ID associated with the source address for this
+        flow.  A Subscriber ID is an unspecified text string, used
+        to ascribe traffic flows to individual users.  At this time
+        the means by which a Subscriber ID may be associated with a
+        flow is unspecified."
+    ::= { flowDataEntry 33 }
+
+flowDataDestSubscriberID OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (4..20))
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Subscriber ID associated with the destination address for
+        this flow.  A Subscriber ID is an unspecified text string,
+        used to ascribe traffic flows to individual users.  At this
+        time the means by which a Subscriber ID may be associated
+        with a flow is unspecified."
+    ::= { flowDataEntry 34 }
+
+flowDataSessionID OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (4..10))
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Session ID for this flow.  Such an ID might be allocated
+        by a network access server to distinguish a series of sessions
+        between the same pair of addresses, which would otherwise
+        appear to be parts of the same accounting flow."
+    ::= { flowDataEntry 35 }
+
+flowDataSourceClass OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Source class for this flow.  Determined by the rules, set by
+        a PushRule action when this flow was entered in the table."
+    ::= { flowDataEntry 36 }
+
+flowDataDestClass OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Destination class for this flow.  Determined by the rules, set
+        by a PushRule action when this flow was entered in the table."
+    ::= { flowDataEntry 37 }
+
+flowDataClass OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Class for this flow.  Determined by the rules, set by a
+        PushRule action when this flow was entered in the table."
+    ::= { flowDataEntry 38 }
+
+flowDataSourceKind OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Source kind for this flow.  Determined by the rules, set by
+        a PushRule action when this flow was entered in the table."
+    ::= { flowDataEntry 39 }
+
+flowDataDestKind OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Destination kind for this flow.  Determined by the rules, set
+        by a PushRule action when this flow was entered in the table."
+    ::= { flowDataEntry 40 }
+
+flowDataKind OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "Class for this flow.  Determined by the rules, set by a
+        PushRule action when this flow was entered in the table."
+    ::= { flowDataEntry 41 }
+
+--
+-- The Activity Column Table
+--
+
+flowColumnActivityTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowColumnActivityEntry
+    MAX-ACCESS  not-accessible
+    STATUS   deprecated
+    DESCRIPTION
+        "Index into the Flow Table.  Allows a meter reader to retrieve
+        a list containing the flow table indexes of flows which were
+        last active at or after a given time, together with the values
+        of a specified attribute for each such flow."
+    ::= { flowData 2 }
+
+flowColumnActivityEntry OBJECT-TYPE
+    SYNTAX  FlowColumnActivityEntry
+    MAX-ACCESS  not-accessible
+    STATUS  deprecated
+    DESCRIPTION
+        "The Column Activity Entry for a particular attribute,
+        activity time and flow."
+    INDEX { flowColumnActivityAttribute, flowColumnActivityTime,
+            flowColumnActivityIndex }
+    ::= { flowColumnActivityTable 1 }
+
+FlowColumnActivityEntry ::= SEQUENCE {
+    flowColumnActivityAttribute   FlowAttributeNumber,
+    flowColumnActivityTime        TimeFilter,
+    flowColumnActivityIndex       Integer32,
+    flowColumnActivityData        OCTET STRING
+
+    }
+
+flowColumnActivityAttribute OBJECT-TYPE
+    SYNTAX  FlowAttributeNumber
+    MAX-ACCESS  read-only
+    STATUS  deprecated
+    DESCRIPTION
+        "Specifies the attribute for which values are required from
+        active flows."
+    ::= { flowColumnActivityEntry 1 }
+
+flowColumnActivityTime OBJECT-TYPE
+    SYNTAX  TimeFilter
+    MAX-ACCESS  read-only
+    STATUS  deprecated
+    DESCRIPTION
+        "This variable is a copy of flowDataLastActiveTime in the
+        flow data record identified by the flowColumnActivityIndex
+        value of this flowColumnActivityTable entry."
+    ::= { flowColumnActivityEntry 2 }
+
+flowColumnActivityIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS  deprecated
+    DESCRIPTION
+        "Index of a flow table entry which was active at or after
+        a specified flowColumnActivityTime."
+    ::= { flowColumnActivityEntry 3 }
+
+flowColumnActivityData OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (3..1000))
+    MAX-ACCESS  read-only
+    STATUS  deprecated
+    DESCRIPTION
+        "Collection of attribute data for flows active after
+        flowColumnActivityTime.  Within the OCTET STRING is a
+        sequence of { flow index, attribute value } pairs, one for
+        each active flow.  The end of the sequence is marked by a
+        flow index value of 0, indicating that there are no more
+        rows in this column.
+
+        The format of objects inside flowColumnFlowData is as follows.
+        All numbers are unsigned.  Numbers and strings appear with
+        their high-order bytes leading.  Numbers are fixed size, as
+        specified by their SYNTAX in the flow table (above), i.e. one
+        octet for flowAddressType and small constants, and four octets
+        for Counter and TimeStamp.  Strings are variable-length, with
+
+        the length given in a single leading octet.
+
+        The following is an attempt at an ASN.1 definition of
+        flowColumnActivityData:
+
+        flowColumnActivityData ::= SEQUENCE flowRowItemEntry
+        flowRowItemEntry ::= SEQUENCE {
+           flowRowNumber    Integer32 (1..65535),
+                                 -- 0 indicates the end of this column
+           flowDataValue   flowDataType -- Choice depends on attribute
+           }
+        flowDataType ::= CHOICE {
+            flowByteValue   Integer32 (1..255),
+            flowShortValue  Integer32 (1..65535),
+            flowLongValue   Integer32,
+            flowStringValue OCTET STRING  -- Length (n) in first byte,
+                  -- n+1 bytes total length, trailing zeroes truncated
+            }"
+    ::= { flowColumnActivityEntry 4 }
+
+--
+-- The Data Package Table
+--
+
+flowDataPackageTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowDataPackageEntry
+    MAX-ACCESS  not-accessible
+    STATUS   current
+    DESCRIPTION
+        "Index into the Flow Table.  Allows a meter reader to retrieve
+        a sequence containing the values of a specified set of
+        attributes for a flow which came from a specified RuleSet and
+        which was last active at or after a given time."
+    ::= { flowData 3 }
+
+flowDataPackageEntry OBJECT-TYPE
+    SYNTAX  FlowDataPackageEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The data package containing selected variables from
+        active rows in the flow table."
+    INDEX { flowPackageSelector,
+        flowPackageRuleSet, flowPackageTime, flowPackageIndex }
+    ::= { flowDataPackageTable 1 }
+
+FlowDataPackageEntry ::= SEQUENCE {
+    flowPackageSelector    OCTET STRING,
+    flowPackageRuleSet     Integer32,
+    flowPackageTime        TimeFilter,
+    flowPackageIndex       Integer32,
+    flowPackageData        OCTET STRING
+    }
+
+flowPackageSelector OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Specifies the attributes for which values are required from
+        an active flow.  These are encoded as a sequence of octets
+        each containing a FlowAttribute number, preceded by an octet
+        giving the length of the sequence (not including the length
+        octet).  For a flowPackageSelector to be valid, it must
+        contain at least one attribute."
+    ::= { flowDataPackageEntry 1 }
+
+flowPackageRuleSet OBJECT-TYPE
+    SYNTAX  Integer32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Specifies the index (in the flowRuleSetInfoTable) of the rule
+        set which produced the required flow."
+    ::= { flowDataPackageEntry 2 }
+
+flowPackageTime OBJECT-TYPE
+    SYNTAX  TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This variable is a copy of flowDataLastActiveTime in the
+        flow data record identified by the flowPackageIndex
+        value of this flowPackageTable entry."
+    ::= { flowDataPackageEntry 3 }
+
+flowPackageIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Index of a flow table entry which was active at or after
+        a specified flowPackageTime."
+    ::= { flowDataPackageEntry 4 }
+
+flowPackageData OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "A collection of attribute values for a single flow, as
+        specified by this row's indexes.  The attribute values are
+        contained within a BER-encoded sequence [ASN-1, ASN-BER],
+        in the order they appear in their flowPackageSelector.
+
+        For example, to retrieve a flowPackage containing values for
+        attributes 11, 18 and 29, for a flow in RuleSet 7, with flow
+        index 3447, one would GET the package whose Object Identifier
+        (OID) is
+            flowPackageData . 3.11.18.29 . 7. 0 . 3447
+
+        To get a package for the next such flow which had been
+        active since time 12345 one would GETNEXT the package whose
+        Object Identifier (OID) is
+            flowPackageData . 3.11.18.29 . 7. 12345 . 3447"
+    ::= { flowDataPackageEntry 5 }
+
+--
+-- The Rule Table
+--
+
+-- This is an array of RuleSets; the 'running' ones are indicated
+-- by the entries in the meter's flowManagerInfoTable.  Several
+-- RuleSets can be held in a meter so that the manager can change the
+-- running RuleSets easily, for example with time of day.  Note that
+-- a manager may not change the rules in any RuleSet currently
+-- referenced within the flowManagerInfoTable (either as 'current' or
+-- 'standby')!  See the 'Traffic Flow Measurement: Architecture'
+-- document [RTFM-ARC] for details of rules and how they are used.
+
+-- Space for a RuleSet is allocated by setting the value of
+-- flowRuleInfoSize in the rule table's flowRuleSetInfoTable row.
+-- Values for each row in the RuleSet (Selector, Mask, MatchedValue,
+-- Action and Parameter) can then be set by the meter.
+
+-- Although an individual rule within a RuleSet could be modified,
+-- it is much safer to simply download a complete new RuleSet.
+
+flowRuleTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF FlowRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS   current
+    DESCRIPTION
+        "Contains all the RuleSets which may be used by the meter."
+    ::= { flowRules 1 }
+
+flowRuleEntry OBJECT-TYPE
+    SYNTAX  FlowRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS   current
+    DESCRIPTION
+        "The rule record itself."
+    INDEX { flowRuleSet, flowRuleIndex }
+    ::= { flowRuleTable 1 }
+
+FlowRuleEntry ::= SEQUENCE {
+    flowRuleSet                  Integer32,
+    flowRuleIndex                Integer32,
+    flowRuleSelector             RuleAttributeNumber,
+    flowRuleMask                 RuleAddress,
+    flowRuleMatchedValue         RuleAddress,
+    flowRuleAction               ActionNumber,
+    flowRuleParameter            Integer32
+    }
+
+flowRuleSet OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Selects a RuleSet from the array of RuleSets."
+    ::= { flowRuleEntry 1 }
+
+flowRuleIndex OBJECT-TYPE
+    SYNTAX  Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The index into the Rule table.  N.B: These values will
+        normally be consecutive, given the fall-through semantics
+        of processing the table."
+    ::= { flowRuleEntry 2 }
+
+flowRuleSelector OBJECT-TYPE
+    SYNTAX  RuleAttributeNumber
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "Indicates the attribute to be matched.
+
+        null(0) is a special case; null rules always succeed.
+
+        matchingStoD(50) is set by the meter's Packet Matching Engine.
+        Its value is true(1) if the PME is attempting to match the
+        packet with its addresses in Source-to-Destination order (i.e.
+        as they appear in the packet), and false(2) otherwise.
+        Details of how packets are matched are given in the 'Traffic
+        Flow Measurement: Architecture' document [RTFM-ARC].
+        v1(51), v2(52), v3(53), v4(54) and v5(55) select meter
+        variables, each of which can hold the name (i.e. selector
+        value) of an address attribute.  When one of these is used
+        as a selector, its value specifies the attribute to be
+        tested.  Variable values are set by an Assign action."
+    ::= { flowRuleEntry 3 }
+
+flowRuleMask OBJECT-TYPE
+    SYNTAX  RuleAddress
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The initial mask used to compute the desired value.  If the
+        mask is zero the rule's test will always succeed."
+    ::= { flowRuleEntry 4 }
+
+flowRuleMatchedValue OBJECT-TYPE
+    SYNTAX  RuleAddress
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The resulting value to be matched for equality.
+        Specifically, if the attribute chosen by the flowRuleSelector
+        logically ANDed with the mask specified by the flowRuleMask
+        equals the value specified in the flowRuleMatchedValue, then
+        continue processing the table entry based on the action
+        specified by the flowRuleAction entry.  Otherwise, proceed to
+        the next entry in the rule table."
+    ::= { flowRuleEntry 5 }
+
+flowRuleAction OBJECT-TYPE
+    SYNTAX  ActionNumber
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The action to be taken if this rule's test succeeds, or if
+        the meter's 'test' flag is off.  Actions are opcodes for the
+        meter's Packet Matching Engine; details are given in the
+        'Traffic Flow Measurement: Architecture' document [RTFM-ARC]."
+    ::= { flowRuleEntry 6 }
+
+flowRuleParameter OBJECT-TYPE
+    SYNTAX  Integer32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "A parameter value providing extra information for this rule's
+        action.  Most of the actions use the parameter value to specify
+        which rule to execute after this rule's test has failed; details
+        are given in the 'Traffic Flow Measurement: Architecture'
+        document [RTFM-ARC]."
+    ::= { flowRuleEntry 7 }
+
+--
+-- Traffic Flow Meter conformance statement
+--
+
+flowMIBCompliances
+    OBJECT IDENTIFIER ::= { flowMIBConformance 1 }
+
+flowMIBGroups
+    OBJECT IDENTIFIER ::= { flowMIBConformance 2 }
+
+flowControlGroup OBJECT-GROUP
+    OBJECTS  {
+        flowRuleInfoSize, flowRuleInfoOwner,
+            flowRuleInfoTimeStamp, flowRuleInfoStatus,
+            flowRuleInfoName,
+            flowRuleInfoRulesReady,
+            flowRuleInfoFlowRecords,
+        flowInterfaceSampleRate,
+            flowInterfaceLostPackets,
+        flowReaderTimeout, flowReaderOwner,
+            flowReaderLastTime, flowReaderPreviousTime,
+            flowReaderStatus, flowReaderRuleSet,
+        flowManagerCurrentRuleSet, flowManagerStandbyRuleSet,
+            flowManagerHighWaterMark,
+            flowManagerCounterWrap,
+            flowManagerOwner, flowManagerTimeStamp,
+            flowManagerStatus, flowManagerRunningStandby,
+        flowFloodMark,
+            flowInactivityTimeout, flowActiveFlows,
+            flowMaxFlows, flowFloodMode }
+    STATUS  deprecated
+    DESCRIPTION
+        "The control group defines objects which are used to control
+        an accounting meter."
+    ::= {flowMIBGroups 1 }
+
+flowDataTableGroup OBJECT-GROUP
+
+    OBJECTS  {
+--      flowDataIndex,                    <- INDEX, not-accessible
+        flowDataStatus,
+        flowDataSourceInterface,
+        flowDataSourceAdjacentType,
+        flowDataSourceAdjacentAddress, flowDataSourceAdjacentMask,
+        flowDataSourcePeerType,
+        flowDataSourcePeerAddress, flowDataSourcePeerMask,
+        flowDataSourceTransType,
+        flowDataSourceTransAddress, flowDataSourceTransMask,
+        flowDataDestInterface,
+        flowDataDestAdjacentType,
+        flowDataDestAdjacentAddress, flowDataDestAdjacentMask,
+        flowDataDestPeerType,
+        flowDataDestPeerAddress, flowDataDestPeerMask,
+        flowDataDestTransType,
+        flowDataDestTransAddress, flowDataDestTransMask,
+--      flowDataRuleSet,                  <- INDEX, not-accessible
+        flowDataToOctets, flowDataToPDUs,
+        flowDataFromOctets, flowDataFromPDUs,
+        flowDataFirstTime, flowDataLastActiveTime,
+        flowDataSourceClass, flowDataDestClass, flowDataClass,
+        flowDataSourceKind, flowDataDestKind, flowDataKind
+        }
+    STATUS  deprecated
+    DESCRIPTION
+        "The flow table group defines objects which provide the
+        structure for the flow table, including the creation time
+        and activity time indexes into it.  In addition it defines
+        objects which provide a base set of flow attributes for the
+        adjacent, peer and transport layers, together with a flow's
+        counters and times.  Finally it defines a flow's class and
+        kind attributes, which are set by rule actions."
+    ::= {flowMIBGroups 2 }
+
+flowDataScaleGroup OBJECT-GROUP
+    OBJECTS  {
+        flowManagerCounterWrap,
+        flowDataPDUScale, flowDataOctetScale
+        }
+    STATUS  deprecated
+    DESCRIPTION
+        "The flow scale group defines objects which specify scale
+        factors for counters."
+    ::= {flowMIBGroups 3 }
+
+flowDataSubscriberGroup OBJECT-GROUP
+    OBJECTS  {
+
+        flowDataSourceSubscriberID, flowDataDestSubscriberID,
+        flowDataSessionID
+        }
+    STATUS  current
+    DESCRIPTION
+        "The flow subscriber group defines objects which may be used
+        to identify the end point(s) of a flow."
+    ::= {flowMIBGroups 4 }
+
+flowDataColumnTableGroup OBJECT-GROUP
+    OBJECTS  {
+        flowColumnActivityAttribute,
+        flowColumnActivityIndex,
+        flowColumnActivityTime,
+        flowColumnActivityData
+        }
+    STATUS  deprecated
+    DESCRIPTION
+        "The flow column table group defines objects which can be used
+        to collect part of a column of attribute values from the flow
+        table."
+    ::= {flowMIBGroups 5 }
+
+flowDataPackageGroup OBJECT-GROUP
+    OBJECTS  {
+        flowPackageData
+        }
+    STATUS  current
+    DESCRIPTION
+        "The data package group defines objects which can be used
+        to collect a specified set of attribute values from a row of
+        the flow table."
+    ::= {flowMIBGroups 6 }
+
+flowRuleTableGroup OBJECT-GROUP
+    OBJECTS  {
+        flowRuleSelector,
+        flowRuleMask, flowRuleMatchedValue,
+        flowRuleAction, flowRuleParameter
+        }
+    STATUS  current
+    DESCRIPTION
+        "The rule table group defines objects which hold the set(s)
+        of rules specifying which traffic flows are to be accounted
+        for."
+    ::= {flowMIBGroups 7 }
+
+flowDataScaleGroup2 OBJECT-GROUP
+
+    OBJECTS  {
+--      flowManagerCounterWrap,           <- Deprecated
+        flowDataPDUScale, flowDataOctetScale
+        }
+    STATUS  current
+    DESCRIPTION
+        "The flow scale group defines objects which specify scale
+        factors for counters.  This group replaces the earlier
+        version of flowDataScaleGroup above (now deprecated)."
+    ::= {flowMIBGroups 8}
+
+flowControlGroup2 OBJECT-GROUP
+    OBJECTS  {
+        flowRuleInfoSize, flowRuleInfoOwner,
+            flowRuleInfoTimeStamp, flowRuleInfoStatus,
+            flowRuleInfoName,
+--          flowRuleInfoRulesReady,       <- Deprecated
+            flowRuleInfoFlowRecords,
+        flowInterfaceSampleRate,
+            flowInterfaceLostPackets,
+        flowReaderTimeout, flowReaderOwner,
+            flowReaderLastTime, flowReaderPreviousTime,
+            flowReaderStatus, flowReaderRuleSet,
+        flowManagerCurrentRuleSet, flowManagerStandbyRuleSet,
+            flowManagerHighWaterMark,
+--          flowManagerCounterWrap,       <- Moved to DataScaleGroup
+            flowManagerOwner, flowManagerTimeStamp,
+            flowManagerStatus, flowManagerRunningStandby,
+        flowFloodMark,
+            flowInactivityTimeout, flowActiveFlows,
+            flowMaxFlows, flowFloodMode }
+    STATUS  current
+    DESCRIPTION
+        "The control group defines objects which are used to control
+        an accounting meter.  It replaces the earlier version of
+        flowControlGroup above (now deprecated)."
+    ::= {flowMIBGroups 9 }
+
+flowMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for a Traffic Flow Meter."
+    MODULE
+        MANDATORY-GROUPS  {
+            flowControlGroup2,
+            flowDataTableGroup,
+            flowDataPackageGroup,
+            flowRuleTableGroup
+
+            }
+    ::= { flowMIBCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/FORCES-MIB.mib b/snmp_builder/mibs/FORCES-MIB.mib
new file mode 100644
index 0000000..903e3ae
--- /dev/null
+++ b/snmp_builder/mibs/FORCES-MIB.mib
@@ -0,0 +1,391 @@
+      FORCES-MIB DEFINITIONS ::= BEGIN
+
+      IMPORTS
+          MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+            mib-2, Integer32
+            FROM SNMPv2-SMI
+
+          TEXTUAL-CONVENTION, TimeStamp
+            FROM SNMPv2-TC
+
+          MODULE-COMPLIANCE, OBJECT-GROUP,
+          NOTIFICATION-GROUP
+            FROM SNMPv2-CONF
+
+          ZeroBasedCounter32
+            FROM RMON2-MIB;
+
+      forcesMib MODULE-IDENTITY
+          LAST-UPDATED "201003100000Z"  -- March 10, 2010
+          ORGANIZATION "IETF Forwarding and Control Element
+                        Separation (ForCES) Working Group"
+          CONTACT-INFO
+              "WG Charter:
+                http://www.ietf.org/html.charters/forces-charter.html
+
+                Mailing lists:
+                    General Discussion: forces@ietf.org
+                    To Subscribe:
+                    https://www.ietf.org/mailman/listinfo/forces
+
+                Chairs: Patrick Droz
+                        Email: dro@zurich.ibm.com
+                        Jamal Hadi Salim
+                        Email: hadi@mojatatu.com
+
+                Editor: Robert Haas
+                        IBM
+                        Email:  rha@zurich.ibm.com"
+          DESCRIPTION
+              "This MIB module contains managed object definitions
+               for the ForCES Protocol.
+
+               Copyright (c) 2010 IETF Trust and the persons identified
+               as authors of the code.  All rights reserved.
+
+               Redistribution and use in source and binary forms, with
+               or without modification, is permitted pursuant to, and
+               subject to the license terms contained in, the
+               Simplified BSD License set forth in Section 4.c of the
+               IETF Trust's Legal Provisions Relating to IETF Documents
+               (http://trustee.ietf.org/license-info).
+
+               This version of this MIB module is part of RFC 5813;
+               see the RFC itself for full legal notices."
+          REVISION "201003100000Z"  -- March 10, 2010
+          DESCRIPTION
+             "Initial version, published as RFC 5813."
+         ::= { mib-2 187 }
+
+ --****************************************************************
+
+      forcesMibNotifications OBJECT IDENTIFIER ::= { forcesMib 0 }
+      forcesMibObjects       OBJECT IDENTIFIER ::= { forcesMib 1 }
+      forcesMibConformance   OBJECT IDENTIFIER ::= { forcesMib 2 }
+
+      ForcesID ::= TEXTUAL-CONVENTION
+          STATUS      current
+          DESCRIPTION
+              "The ForCES identifier is a 4-octet quantity."
+          SYNTAX      OCTET STRING (SIZE (4))
+
+      ForcesProtocolVersion ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+              "ForCES protocol version number.
+               The version numbers used are defined in the
+               specifications of the respective protocol:
+               1 - ForCESv1, RFC 5810."
+          SYNTAX      Integer32 (1..255)
+
+-- Notifications
+
+      forcesAssociationEntryUp NOTIFICATION-TYPE
+         OBJECTS     {
+            forcesAssociationRunningProtocolVersion
+         }
+         STATUS      current
+         DESCRIPTION
+              "This notification is generated as soon
+               as an association enters the UP state.
+               Note that these notifications are not
+               throttled as the CE itself should
+               throttle the setup of associations."
+         ::= { forcesMibNotifications 1 }
+
+       forcesAssociationEntryDown NOTIFICATION-TYPE
+         OBJECTS     {
+            forcesAssociationRunningProtocolVersion
+         }
+         STATUS      current
+         DESCRIPTION
+              "This notification is generated as soon
+               as an association leaves the UP state.
+               Note that these notifications are not
+               throttled as the CE itself should
+               throttle the setup of associations."
+         ::= { forcesMibNotifications 2 }
+
+      forcesAssociationEntryUpStats NOTIFICATION-TYPE
+         OBJECTS     {
+            forcesAssociationRunningProtocolVersion,
+            forcesAssociationTimeUp
+         }
+         STATUS      current
+         DESCRIPTION
+              "This notification is generated as soon
+               as an association enters the UP state.
+               Note that these notifications are not
+               throttled as the CE itself should
+               throttle the setup of associations."
+         ::= { forcesMibNotifications 3 }
+
+       forcesAssociationEntryDownStats NOTIFICATION-TYPE
+         OBJECTS     {
+            forcesAssociationRunningProtocolVersion,
+            forcesAssociationTimeUp,
+            forcesAssociationTimeDown,
+            forcesAssociationHBMsgSent,
+            forcesAssociationHBMsgReceived,
+            forcesAssociationOperMsgSent,
+            forcesAssociationOperMsgReceived,
+            forcesAssociationCounterDiscontinuityTime
+            }
+         STATUS      current
+         DESCRIPTION
+              "This notification is generated as soon
+               as an association leaves the UP state.
+               Note that these notifications are not
+               throttled as the CE itself should
+               throttle the setup of associations."
+         ::= { forcesMibNotifications 4 }
+
+-- Objects
+
+      forcesLatestProtocolVersionSupported OBJECT-TYPE
+          SYNTAX      ForcesProtocolVersion
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+                 "The ForCES protocol version supported by the CE.
+                  The current protocol version is 1.
+                  Note that the CE must also allow interaction
+                  with FEs supporting earlier versions."
+          ::= { forcesMibObjects 1 }
+
+      forcesAssociations OBJECT IDENTIFIER ::= { forcesMibObjects 2 }
+
+      forcesAssociationTable OBJECT-TYPE
+          SYNTAX SEQUENCE OF ForcesAssociationEntry
+          MAX-ACCESS not-accessible
+          STATUS current
+          DESCRIPTION
+                 "The (conceptual) table of associations."
+          ::= { forcesAssociations 1 }
+
+      forcesAssociationEntry OBJECT-TYPE
+          SYNTAX ForcesAssociationEntry
+          MAX-ACCESS not-accessible
+          STATUS current
+          DESCRIPTION
+                 "A (conceptual) entry for one association."
+          INDEX { forcesAssociationCEID, forcesAssociationFEID }
+          ::= { forcesAssociationTable 1 }
+
+      ForcesAssociationEntry ::= SEQUENCE {
+              forcesAssociationCEID             ForcesID,
+              forcesAssociationFEID             ForcesID,
+              forcesAssociationRunningProtocolVersion
+                                          ForcesProtocolVersion,
+              forcesAssociationTimeUp           TimeStamp,
+              forcesAssociationTimeDown         TimeStamp,
+              forcesAssociationHBMsgSent        ZeroBasedCounter32,
+              forcesAssociationHBMsgReceived    ZeroBasedCounter32,
+              forcesAssociationOperMsgSent      ZeroBasedCounter32,
+              forcesAssociationOperMsgReceived  ZeroBasedCounter32,
+              forcesAssociationCounterDiscontinuityTime  TimeStamp
+     }
+
+      forcesAssociationCEID OBJECT-TYPE
+          SYNTAX ForcesID
+          MAX-ACCESS not-accessible
+          STATUS current
+          DESCRIPTION
+                 "The ForCES ID of the CE."
+          ::= { forcesAssociationEntry 1 }
+
+      forcesAssociationFEID OBJECT-TYPE
+          SYNTAX ForcesID
+          MAX-ACCESS not-accessible
+          STATUS current
+          DESCRIPTION
+                 "The ForCES ID of the FE."
+          ::= { forcesAssociationEntry 2 }
+
+      forcesAssociationRunningProtocolVersion OBJECT-TYPE
+          SYNTAX      ForcesProtocolVersion
+          MAX-ACCESS  read-only
+          STATUS      current
+          DESCRIPTION
+                 "The current ForCES protocol version used in
+                  this association.
+                  The current protocol version is 1."
+          ::= { forcesAssociationEntry 3 }
+
+      forcesAssociationTimeUp OBJECT-TYPE
+          SYNTAX TimeStamp
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+                 "The value of sysUpTime at the time this
+                  association entered the UP state.
+                  If this association started prior to the last
+                  initialization of the network subsystem, then
+                  this object contains a zero value.
+                  This object allows to uniquely identify
+                  associations with the same CE and FE IDs."
+          ::= { forcesAssociationEntry 4 }
+
+      forcesAssociationTimeDown OBJECT-TYPE
+          SYNTAX TimeStamp
+          MAX-ACCESS accessible-for-notify
+          STATUS current
+          DESCRIPTION
+                 "The value of sysUpTime at the time this
+                  association left the UP state."
+          ::= { forcesAssociationEntry 5 }
+
+      forcesAssociationHBMsgSent OBJECT-TYPE
+          SYNTAX ZeroBasedCounter32
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+                 "A counter of how many Heartbeat messages have
+                  been sent by the CE on this association
+                  since the association entered the UP state.
+                  Discontinuities in the value of this counter
+                  can occur at reinitialization of the management
+                  system, and at other times as indicated by the
+                  value of forcesAssociationCounterDiscontinuityTime."
+          ::= { forcesAssociationEntry 6 }
+
+      forcesAssociationHBMsgReceived OBJECT-TYPE
+          SYNTAX ZeroBasedCounter32
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+                 "A counter of how many Heartbeat messages
+                  have been received by the CE on this association
+                  since the association entered the UP state.
+                  Discontinuities in the value of this counter
+                  can occur at reinitialization of the management
+                  system, and at other times as indicated by the
+                  value of forcesAssociationCounterDiscontinuityTime."
+          ::= { forcesAssociationEntry 7 }
+
+      forcesAssociationOperMsgSent OBJECT-TYPE
+          SYNTAX ZeroBasedCounter32
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+                 "A counter of how many messages other than
+                  Heartbeat (i.e., Config and Query)
+                  have been sent by the CE on this association
+                  since the association entered the UP state.
+                  Discontinuities in the value of this counter
+                  can occur at reinitialization of the management
+                  system, and at other times as indicated by the
+                  value of forcesAssociationCounterDiscontinuityTime."
+          ::= { forcesAssociationEntry 8 }
+
+      forcesAssociationOperMsgReceived OBJECT-TYPE
+          SYNTAX ZeroBasedCounter32
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+                 "A counter of how many messages other than
+                  Heartbeat (i.e., Config response, Query response,
+                  event notification, and packet redirect)
+                  have been received by the CE on this association
+                  since the association entered the UP state.
+                  Discontinuities in the value of this counter
+                  can occur at reinitialization of the management
+                  system, and at other times as indicated by the
+                  value of forcesAssociationCounterDiscontinuityTime."
+          ::= { forcesAssociationEntry 9 }
+
+      forcesAssociationCounterDiscontinuityTime OBJECT-TYPE
+          SYNTAX TimeStamp
+          MAX-ACCESS read-only
+          STATUS current
+          DESCRIPTION
+                 "The value of sysUpTime on the most recent occasion
+                  at which any one or more of this association's
+                  counters suffered a discontinuity.  The relevant
+                  counters are the specific instances associated with
+                  this association of any ZeroBasedCounter32 object
+                  contained in the forcesAssociationTable.  If no
+                  such discontinuities have occurred since the last
+                  reinitialization of the local management subsystem,
+                  then this object contains a zero value."
+          ::= { forcesAssociationEntry 10 }
+
+-- Conformance
+
+      forcesMibCompliances   OBJECT IDENTIFIER
+                               ::= { forcesMibConformance 1 }
+      forcesMibGroups        OBJECT IDENTIFIER
+                               ::= { forcesMibConformance 2 }
+
+-- Compliance statements
+
+      forcesMibCompliance  MODULE-COMPLIANCE
+          STATUS current
+          DESCRIPTION
+                 "The compliance statement for routers running
+                  ForCES and implementing the ForCES MIB."
+          MODULE  -- this module
+            MANDATORY-GROUPS { forcesMibGroup, forcesNotificationGroup }
+
+            GROUP forcesNotificationStatsGroup
+            DESCRIPTION
+                   "Implementation of this group is recommended."
+
+            GROUP forcesStatsGroup
+            DESCRIPTION
+              "Implementation of this group is recommended."
+          ::= { forcesMibCompliances 1 }
+
+-- Units of conformance
+
+      forcesNotificationGroup NOTIFICATION-GROUP
+          NOTIFICATIONS { forcesAssociationEntryUp,
+                          forcesAssociationEntryDown
+                        }
+          STATUS  current
+          DESCRIPTION
+                 "A collection of notifications for signaling
+                  important ForCES events."
+          ::= { forcesMibGroups 1 }
+
+      forcesMibGroup OBJECT-GROUP
+          OBJECTS { forcesLatestProtocolVersionSupported,
+                    forcesAssociationRunningProtocolVersion
+                  }
+          STATUS  current
+          DESCRIPTION
+                 "A collection of objects to support management
+                  of ForCES routers."
+        ::= { forcesMibGroups 2 }
+
+      forcesNotificationStatsGroup NOTIFICATION-GROUP
+          NOTIFICATIONS { forcesAssociationEntryUpStats,
+                          forcesAssociationEntryDownStats
+                        }
+          STATUS  current
+          DESCRIPTION
+                 "A collection of optional notifications for
+                  signaling important ForCES events including
+                  statistics."
+          ::= { forcesMibGroups 3 }
+
+      forcesStatsGroup OBJECT-GROUP
+          OBJECTS { forcesAssociationTimeUp,
+                    forcesAssociationTimeDown,
+                    forcesAssociationHBMsgSent,
+                    forcesAssociationHBMsgReceived,
+                    forcesAssociationOperMsgSent,
+                    forcesAssociationOperMsgReceived,
+                    forcesAssociationCounterDiscontinuityTime
+                  }
+          STATUS  current
+          DESCRIPTION
+                 "A collection of optional objects to provide
+                  extra information about the associations.
+                  There is no protocol reason to keep such
+                  information, but these objects can be very
+                  useful in debugging connectivity problems."
+        ::= { forcesMibGroups 4}
+
+      END
diff --git a/snmp_builder/mibs/FR-ATM-PVC-SERVICE-IWF-MIB.mib b/snmp_builder/mibs/FR-ATM-PVC-SERVICE-IWF-MIB.mib
new file mode 100644
index 0000000..5489443
--- /dev/null
+++ b/snmp_builder/mibs/FR-ATM-PVC-SERVICE-IWF-MIB.mib
@@ -0,0 +1,1066 @@
+FR-ATM-PVC-SERVICE-IWF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+              MODULE-IDENTITY, OBJECT-TYPE,
+              NOTIFICATION-TYPE,
+              mib-2, Integer32, Counter32             FROM SNMPv2-SMI
+
+              RowStatus, TimeStamp                    FROM SNMPv2-TC
+
+              MODULE-COMPLIANCE, OBJECT-GROUP,
+              NOTIFICATION-GROUP                      FROM SNMPv2-CONF
+
+              AtmVpIdentifier, AtmVcIdentifier        FROM ATM-TC-MIB
+
+              atmVclEntry                             FROM ATM-MIB
+
+              InterfaceIndex                          FROM IF-MIB;
+
+         frAtmIwfMIB MODULE-IDENTITY
+             LAST-UPDATED "200009280000Z" -- September 28, 2000
+             ORGANIZATION "IETF Frame Relay Service MIB Working Group"
+             CONTACT-INFO
+                 "WG Charter:
+                    http://www.ietf.org/html.charters/frnetmib-charter
+                  WG-email:
+                    frnetmib@sunroof.eng.sun.com
+                  Subscribe:
+                    frnetmib-request@sunroof.eng.sun.com
+                  Email Archive:
+                    ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
+
+                  Chair:      Andy Malis
+                              Vivace Networks, Inc.
+                  Email:      Andy.Malis@vivacenetworks.com
+
+                  WG editor:  Kenneth Rehbehn
+                              Megisto Systems, Inc.
+                  Email:      krehbehn@megisto.com
+
+                  Co-author:  Orly Nicklass
+                              RAD Data Communications Ltd.
+                  EMail:      orly_n@rad.co.il
+
+                  Co-author:  George Mouradian
+                              AT&T Labs
+                  EMail:      gvm@att.com"
+             DESCRIPTION
+                     "The MIB module for monitoring and controlling the
+                     Frame Relay/ATM PVC Service Interworking
+                     Function."
+
+             --
+             -- Revision History
+             --
+
+             REVISION "200009280000Z"
+             DESCRIPTION
+                  "Published as RFC 2955"
+         ::= { mib-2 86 }
+
+         --
+         -- Object Identifiers
+         --
+            frAtmIwfMIBObjects      OBJECT IDENTIFIER
+                                         ::= { frAtmIwfMIB 1 }
+
+            frAtmIwfTraps           OBJECT IDENTIFIER
+                                         ::= { frAtmIwfMIB 2 }
+            frAtmIwfTrapsPrefix     OBJECT IDENTIFIER
+                                         ::= { frAtmIwfTraps 0 }
+
+            frAtmIwfConformance     OBJECT IDENTIFIER
+                                         ::= { frAtmIwfMIB 3 }
+            frAtmIwfGroups          OBJECT IDENTIFIER
+                                         ::= { frAtmIwfConformance 1 }
+            frAtmIwfCompliances     OBJECT IDENTIFIER
+                                         ::= { frAtmIwfConformance 2 }
+
+         --
+         --  The FR/ATM PVC Service IWF Group
+         --
+         --      The Frame Relay/ATM PVC Service Interworking Function
+         --      Connection Table contains all connections utilizing
+         --      the interworking function.
+         --
+
+         frAtmIwfConnIndexNext OBJECT-TYPE
+              SYNTAX         Integer32 (0..2147483647)
+              MAX-ACCESS     read-only
+              STATUS         current
+              DESCRIPTION
+                     "This object contains an appropriate value to be
+                     used for frAtmIwfConnIndex  when creating entries
+                     in the frAtmIwfConnectionTable. The value 0
+                     indicates that no unassigned entries are
+                     available. To obtain the frAtmIwfConnIndexNext
+                     value for a new entry, the manager issues a
+                     management protocol retrieval operation to obtain
+                     the current value of this object.  After each
+                     retrieval, the agent should modify the value to
+                     the next unassigned index."
+              ::= { frAtmIwfMIBObjects 1 }
+
+         frAtmIwfConnectionTable OBJECT-TYPE
+             SYNTAX      SEQUENCE OF FrAtmIwfConnectionEntry
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "A table in which each row represents a Frame
+                     Relay/ATM interworking connection."
+             ::= { frAtmIwfMIBObjects 2 }
+
+         frAtmIwfConnectionEntry OBJECT-TYPE
+             SYNTAX      FrAtmIwfConnectionEntry
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The FrAtmIwfConnectionEntry provides an entry for
+                     an interworking connection between a frame relay
+                     PVC and one or more ATM PVCs, or an ATM PVC and
+                     one or more frame relay PVCs.  A single frame
+                     relay PVC connected to a single ATM PVC is
+                     referred to as a `point-to-point' connection and
+                     is represented by a single row in the FR/ATM IWF
+                     Connection Table.  The case of a single frame
+                     relay PVC connected to multiple ATM PVCs (or
+                     single ATM PVC connected to multiple frame relay
+                     PVCs) is referred to as a `point-to-multipoint'
+                     connection and is represented by multiple rows in
+                     the FR/ATM IWF Connection Table.
+
+                     The object frAtmIwfConnIndex uniquely identifies
+                     each point-to-point or point-to-multipoint
+                     connection.  The manager obtains the
+                     frAtmIwfConnIndex value by reading the
+                     frAtmIwfConnIndexNext object.
+
+                     After a frAtmIwfConnIndex is assigned for the
+                     connection, the manager creates one or more rows
+                     in the Cross Connect Table; one for each cross-
+                     connection between the frame relay PVC and an ATM
+                     PVC. In the case of `point-to-multipoint'
+                     connections, all rows are indexed by the same
+                     frAtmIwfConnIndex value and MUST refer to the same
+                     frame relay PVC or ATM PVC respectively.  An entry
+                     can be created only when at least one pair of
+                     frame relay and ATM PVCs exist.
+
+                     A row can be established by one-step set-request
+                     with all required parameter values and
+                     frAtmIwfConnRowStatus set to createAndGo(4). The
+
+                     Agent should perform all error checking as needed.
+                     A pair of cross-connected PVCs, as identified by a
+                     particular value of the indexes, is released by
+                     setting frAtmIwfConnRowStatus to destroy(6). The
+                     Agent may release all associated resources. The
+                     manager may remove the related PVCs thereafter.
+                     Indexes are persistent across reboots of the
+                     system."
+             INDEX   { frAtmIwfConnIndex,
+                       frAtmIwfConnAtmPort,
+                       frAtmIwfConnVpi,
+                       frAtmIwfConnVci,
+                       frAtmIwfConnFrPort,
+                       frAtmIwfConnDlci
+                     }
+             ::= { frAtmIwfConnectionTable 1 }
+
+         FrAtmIwfConnectionEntry ::=
+             SEQUENCE {
+                 frAtmIwfConnIndex                      Integer32,
+                 frAtmIwfConnAtmPort                    InterfaceIndex,
+                 frAtmIwfConnVpi                        AtmVpIdentifier,
+                 frAtmIwfConnVci                        AtmVcIdentifier,
+                 frAtmIwfConnFrPort                     InterfaceIndex,
+                 frAtmIwfConnDlci                       Integer32,
+                 frAtmIwfConnRowStatus                  RowStatus,
+                 frAtmIwfConnAdminStatus                INTEGER,
+                 frAtmIwfConnAtm2FrOperStatus           INTEGER,
+                 frAtmIwfConnAtm2FrLastChange           TimeStamp,
+                 frAtmIwfConnFr2AtmOperStatus           INTEGER,
+                 frAtmIwfConnFr2AtmLastChange           TimeStamp,
+                 frAtmIwfConnectionDescriptor           Integer32,
+                 frAtmIwfConnFailedFrameTranslate       Counter32,
+                 frAtmIwfConnOverSizedFrames            Counter32,
+                 frAtmIwfConnFailedAal5PduTranslate     Counter32,
+                 frAtmIwfConnOverSizedSDUs              Counter32,
+                 frAtmIwfConnCrcErrors                  Counter32,
+                 frAtmIwfConnSarTimeOuts                Counter32
+         }
+
+         frAtmIwfConnIndex  OBJECT-TYPE
+             SYNTAX      Integer32  (1..2147483647)
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "A unique value for each point-to-point or point-
+                     to-multipoint connection.  The manager obtains the
+                     frAtmIwfConnIndex value by reading the
+
+                     frAtmIwfConnIndexNext object.  A point-to-
+                     multipoint connection will be represented in the
+                     frAtmIwfConnectionTable with multiple entries that
+                     share the same frAtmIwfConnIndex value."
+             ::= { frAtmIwfConnectionEntry 1 }
+
+         frAtmIwfConnAtmPort OBJECT-TYPE
+             SYNTAX      InterfaceIndex
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The index in the ifTable that identifies the ATM
+                     port for this interworking connection."
+             ::= { frAtmIwfConnectionEntry 2 }
+
+         frAtmIwfConnVpi OBJECT-TYPE
+             SYNTAX      AtmVpIdentifier
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The VPI of the ATM PVC end point for this
+                      interworking connection."
+             ::= { frAtmIwfConnectionEntry 3 }
+
+         frAtmIwfConnVci OBJECT-TYPE
+             SYNTAX      AtmVcIdentifier
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The VCI of the ATM PVC end point for this
+                     interworking
+                      connection."
+             ::= { frAtmIwfConnectionEntry 4 }
+
+         frAtmIwfConnFrPort OBJECT-TYPE
+             SYNTAX      InterfaceIndex
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The index in the ifTable that identifies the
+                     frame relay port for this interworking
+                     connection."
+             ::= { frAtmIwfConnectionEntry 5 }
+
+         frAtmIwfConnDlci OBJECT-TYPE
+             SYNTAX      Integer32 (16..4194303)
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The DLCI that identifies the frame relay PVC end
+                     point for this interworking connection."
+             ::= { frAtmIwfConnectionEntry 6 }
+
+         frAtmIwfConnRowStatus OBJECT-TYPE
+             SYNTAX      RowStatus
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "The table row may be created with
+                     'createAndWait(5)' or 'createAndGo(4)'.
+                     To activate a connection entry, a valid connection
+                     descriptor MUST be established in the
+                     frAtmIwfConnectionDescriptor object.
+
+                     This object is set to 'destroy(6)' to delete the
+                     table row.  Before the table row is destroyed, the
+                     OperStatus/AdminStatus of the corresponding
+                     endpoints MUST be 'down(2)'.  The deactivation of
+                     the ATM endpoint MAY occur as a side-effect of
+                     deleting the FR/ATM IWF cross-connection table
+                     row.  Otherwise, 'destroy(6)' operation MUST fail
+                     (error code 'inconsistentValue')."
+             ::= { frAtmIwfConnectionEntry 7 }
+
+         frAtmIwfConnAdminStatus OBJECT-TYPE
+             SYNTAX      INTEGER { up(1), down(2) }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "The desired operational state for this FR/ATM
+                     interworked connection.
+
+                     up(1)       = Activate the connection. Before the
+                                   activation can be completed, the
+                                   OperStatus/AdminStatus of the
+                                   corresponding endpoints MUST be
+                                   'up(1)'.  The activation of the
+                                   corresponding endpoints MAY occur as
+                                   a side-effect of activating the
+                                   FR/ATM IWF cross-connection.
+
+                     down(2)     = Deactivate the connection. Before
+                                   the deactivation can be completed,
+                                   the atmVclAdminStatus of the
+                                   corresponding ATM endpoint MUST be
+                                   'down(2)'.  The deactivation of the
+
+                                   ATM endpoint MAY occur as a
+                                   side-effect of deactivating the
+                                   FR/ATM IWF cross-connection."
+             ::= { frAtmIwfConnectionEntry 8 }
+
+         frAtmIwfConnAtm2FrOperStatus     OBJECT-TYPE
+             SYNTAX      INTEGER { up(1), down(2) }
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "The current operational state of this
+                     interworking connection in the ATM to frame
+                     relay direction."
+             ::= { frAtmIwfConnectionEntry 9 }
+
+         frAtmIwfConnAtm2FrLastChange  OBJECT-TYPE
+             SYNTAX      TimeStamp
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "The value of sysUpTime at the time this
+                     interworking connection entered its current
+                     operational state in the ATM to FR direction.  If
+                     the current state was entered prior to the last
+                     re-initialization of the local network management
+                     subsystem, then this object contains a zero
+                     value."
+             ::= { frAtmIwfConnectionEntry 10 }
+
+         frAtmIwfConnFr2AtmOperStatus     OBJECT-TYPE
+             SYNTAX      INTEGER { up(1), down(2) }
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "The current operational state of this
+                     interworking connection in the frame relay
+                     to ATM direction."
+             ::= { frAtmIwfConnectionEntry 11 }
+
+         frAtmIwfConnFr2AtmLastChange  OBJECT-TYPE
+             SYNTAX      TimeStamp
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "The value of sysUpTime at the time this
+                     interworking connection entered its current
+                     operational state in the FR to ATM direction.  If
+                     the current state was entered prior to the last
+
+                     re-initialization of the local network management
+                     subsystem, then this object contains a zero
+                     value."
+             ::= { frAtmIwfConnectionEntry 12 }
+
+         frAtmIwfConnectionDescriptor  OBJECT-TYPE
+             SYNTAX      Integer32
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "The value represents a pointer to the relevant
+                     descriptor in the IWF descriptor table.  An
+                     attempt to set this value to an inactive or non-
+                     existent row in the Connection Descriptor Table
+                     MUST fail (error code 'inconsistentValue')."
+             ::= { frAtmIwfConnectionEntry 13 }
+
+         frAtmIwfConnFailedFrameTranslate OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "Frames"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "This object counts the number of frames discarded
+                     by the IWF because, while operating in Translation
+                     Mode, the IWF is unable to decode the incoming
+                     frame payload header according to the mapping
+                     rules. (i.e., payload header not recognized by the
+                     IWF).
+
+                     Frame relay frames are received in the frame relay
+                     to ATM direction of the PVC.
+
+                     When operating in Transparent Mode, the IWF MUST
+                     return noSuchInstance."
+                       REFERENCE
+                                "FRF.8 [17], Section 5.3.1"
+                       ::= { frAtmIwfConnectionEntry 14 }
+
+         frAtmIwfConnOverSizedFrames OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "Frames"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "Count of frames discarded by the IWF because the
+                     frame is too large to be processed by the AAL5
+                     segmentation procedure.  Specifically, the frame
+
+                     does not conform to the size specified in the
+                     atmVccAal5CpcsTransmitSduSize object associated
+                     with the atmVclEntry at the ATM endpoint.
+                     Frame relay frames are received in the frame relay
+                     to ATM direction of the PVC."
+                       REFERENCE
+                                "ATM MIB [21], atmVclTable
+                                 FRF.8 [17], 5.3.1.4"
+                       ::= { frAtmIwfConnectionEntry 15 }
+
+         frAtmIwfConnFailedAal5PduTranslate OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "PDUs"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "This attribute counts the number of AAL5 PDUs
+                     discarded by the IWF because, while operating in
+                     Translation Mode, the IWF is unable to decode the
+                     incoming AAL5 PDU payload header according to the
+                     mapping rules. (i.e., payload header not
+                     recognized by the IWF).
+
+                     AAL5 PDUs are received in the ATM to frame relay
+                     direction of the PVC.
+
+                     When operating in Transparent Mode, the IWF MUST
+                     return noSuchInstance."
+                       REFERENCE
+                                "FRF.8 [17], Section 5.3.1"
+                       ::= { frAtmIwfConnectionEntry 16 }
+
+         frAtmIwfConnOverSizedSDUs OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "SDUs"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "Count of AAL5 SDUs discarded by the IWF because
+                     the SDU is too large to be forwarded on the frame
+                     relay segment of the connection.  Specifically,
+                     the frame does not conform to the size specified
+                     in the frLportFragSize object of the FRS MIB [19].
+
+                     AAL5 PDUs are received in the ATM to frame relay
+                     direction of the PVC."
+                       REFERENCE
+                                "FRS MIB [19], frLportTable
+
+                                 FRF.8 [17], 5.3.1.4"
+                       ::= { frAtmIwfConnectionEntry 17 }
+
+         frAtmIwfConnCrcErrors OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "PDUs"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "The number of AAL5 CPCS PDUs received with CRC-32
+                     errors on this AAL5 VCC at the IWF.
+
+                     AAL5 PDUs are received in the ATM to frame relay
+                     direction of the PVC."
+                       REFERENCE
+                                "ATM MIB [21], atmVclTable"
+                       ::= { frAtmIwfConnectionEntry 18 }
+
+         frAtmIwfConnSarTimeOuts OBJECT-TYPE
+             SYNTAX      Counter32
+             UNITS       "PDUs"
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "The number of partially re-assembled AAL5 CPCS
+                     PDUs which were discarded on this AAL5 VCC at the
+                     IWF because they were not fully re-assembled
+                     within the required time period.  If the re-
+                     assembly timer is not supported, then this object
+                     contains a zero value.
+
+                     AAL5 PDUs are received in the ATM to frame relay
+                     direction of the PVC."
+                       REFERENCE
+                                "ATM MIB [21], atmVclTable"
+                       ::= { frAtmIwfConnectionEntry 19 }
+
+         --
+         -- The FR/ATM PVC Service IWF Connection Descriptor Group
+         --
+         --     The Frame Relay/ATM PVC Service Interworking Function
+         --     Connection Descriptor table.  A descriptor provides the
+         --     attributes for a type of interworked connection.
+         --
+
+         frAtmIwfConnectionDescriptorIndexNext OBJECT-TYPE
+              SYNTAX      Integer32 (0..2147483647)
+              MAX-ACCESS  read-only
+              STATUS      current
+              DESCRIPTION
+                     "This object contains an appropriate value to be
+                     used for frAtmIwfConnectionDescriptorIndex  when
+                     creating entries in the
+                     frAtmIwfConnectionDescriptorTable. The value 0
+                     indicates that no unassigned entries are
+                     available. To obtain the
+                     frAtmIwfConnectionDescriptorIndexNext value for a
+                     new entry, the manager issues a management
+                     protocol retrieval operation to obtain the current
+                     value of this object.  After each retrieval, the
+                     agent should modify the value to the next
+                     unassigned index."
+              ::= { frAtmIwfMIBObjects 3 }
+
+         frAtmIwfConnectionDescriptorTable OBJECT-TYPE
+             SYNTAX      SEQUENCE OF FrAtmIwfConnectionDescriptorEntry
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "A table in which each row represents a descriptor
+                     for one type of Frame Relay/ATM interworking
+                     connection.  A descriptor may be assigned to zero
+                     or more FR/ATM PVC service IWF connections."
+             ::= { frAtmIwfMIBObjects 4 }
+
+         frAtmIwfConnectionDescriptorEntry OBJECT-TYPE
+             SYNTAX      FrAtmIwfConnectionDescriptorEntry
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "An entry for a descriptor in an interworking
+                     connection between a frame relay PVC and an ATM
+                     PVC."
+             INDEX   { frAtmIwfConnectionDescriptorIndex  }
+             ::= { frAtmIwfConnectionDescriptorTable 1 }
+
+         FrAtmIwfConnectionDescriptorEntry ::=
+             SEQUENCE {
+                 frAtmIwfConnectionDescriptorIndex      Integer32,
+                 frAtmIwfConnDescriptorRowStatus        RowStatus,
+                 frAtmIwfConnDeToClpMappingMode         INTEGER,
+                 frAtmIwfConnClpToDeMappingMode         INTEGER,
+                 frAtmIwfConnCongestionMappingMode      INTEGER,
+                 frAtmIwfConnEncapsulationMappingMode   INTEGER,
+                 frAtmIwfConnEncapsulationMappings      BITS,
+                 frAtmIwfConnFragAndReassEnabled        INTEGER,
+                 frAtmIwfConnArpTranslationEnabled      INTEGER
+         }
+
+         frAtmIwfConnectionDescriptorIndex OBJECT-TYPE
+             SYNTAX      Integer32 (1..2147483647)
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "A unique value to identify a descriptor in the
+                     table "
+             ::= { frAtmIwfConnectionDescriptorEntry 1 }
+
+         frAtmIwfConnDescriptorRowStatus OBJECT-TYPE
+             SYNTAX      RowStatus
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "The status of this table row.  This object is
+                     used to create or delete an entry in the
+                     descriptor table.
+
+                     Creation of the row requires a row index (see
+                     frAtmIwfConnectionDescriptorIndexNext).  If not
+                     explicitly set or in existence, all other columns
+                     of the row will be created and initialized to the
+                     default value.  During creation, this object MAY
+                     be set to 'createAndGo(4)' or 'createAndWait(5)'.
+                     The object MUST contain the value 'active(1)'
+                     before any connection table entry references the
+                     row.
+
+                     To destroy a row in this table, this object is set
+                     to the 'destroy(6)' action.  Row destruction MUST
+                     fail (error code 'inconsistentValue') if any
+                     connection references the row."
+             ::= { frAtmIwfConnectionDescriptorEntry 2 }
+
+         frAtmIwfConnDeToClpMappingMode OBJECT-TYPE
+             SYNTAX      INTEGER {
+                            mode1(1),
+                            mode2Const0(2),
+                            mode2Const1(3)
+                         }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "This object describes which mode of translation
+                     is in use for loss priority mapping in the frame
+
+                     relay to ATM direction.
+
+                     mode1(1)        = the DE field in the Q.922 core
+                                       frame shall be mapped to the ATM
+                                       CLP field of every cell
+                                       generated by the segmentation
+                                       process of the AAL5 PDU
+                                       containing the information of
+                                       that frame.
+
+                     mode2Contst0(2) = the ATM CLP field of every cell
+                                       generated by the segmentation
+                                       process of the AAL5 PDU
+                                       containing the information of
+                                       that frame shall be set to
+                                       constant 0.
+
+                     mode2Contst1(3) = the ATM CLP field of every cell
+                                       generated by the segmentation
+                                       process of the AAL5 PDU
+                                       containing the information of
+                                       that frame shall be set to
+                                       constant 1."
+             REFERENCE
+                      "FRF.8 [17], Section 4.2.1"
+             DEFVAL { mode1 }
+             ::= { frAtmIwfConnectionDescriptorEntry 3 }
+
+         frAtmIwfConnClpToDeMappingMode OBJECT-TYPE
+             SYNTAX      INTEGER {
+                           mode1(1),
+                           mode2Const0(2),
+                           mode2Const1(3)
+                         }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "This object describes which mode of translation
+                     is in use for loss priority mapping in the ATM to
+                     frame relay direction.
+
+                     mode1(1)       = if one or more cells in a frame
+                                      has its CLP field set, the DE
+                                      field of the Q.922 core frame
+                                      should be set.
+
+                     mode2Const0(2) = the DE field of the Q.922 core
+                                      frame should be set to the
+
+                                      constant 0.
+
+                     mode2Const1(3) = the DE field of the Q.922 core
+                                      frame should be set to the
+                                      constant 1."
+             REFERENCE
+                      "FRF.8 [17], Section 4.2.2"
+             DEFVAL { mode1 }
+             ::= { frAtmIwfConnectionDescriptorEntry 4 }
+
+         frAtmIwfConnCongestionMappingMode OBJECT-TYPE
+             SYNTAX      INTEGER {
+                            mode1(1),
+                            mode2(2)
+                         }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "This object describes which mode of translation
+                     is in use for forward congestion indication
+                     mapping in the frame relay to ATM direction.
+
+                     mode1(1) = The FECN field in the Q.922 core frame
+                                shall be mapped to the ATM EFCI field
+                                of every cell generated by the
+                                segmentation process of the AAL5 PDU
+                                containing the information of that
+                                frame.
+
+                     mode2(2) = The FECN field in the Q.922 core frame
+                                shall not be mapped to the ATM EFCI
+                                field of cells generated by the
+                                segmentation process of the AAL5 PDU
+                                containing the information of that
+                                frame. The EFCI field is always set to
+                                'congestion not experienced'.
+
+                     In both of the modes above, if there is congestion
+                     in the forward direction in the ATM layer within
+                     the IWF, then the IWF can set the EFCI field to
+                     'congestion experienced'."
+             REFERENCE
+                         "FRF.8 [17], Section 4.3.1.1"
+             DEFVAL      { mode1 }
+             ::= { frAtmIwfConnectionDescriptorEntry 5 }
+
+         frAtmIwfConnEncapsulationMappingMode OBJECT-TYPE
+             SYNTAX      INTEGER {
+
+                            transparentMode(1),
+                            translationMode(2),
+                            translationModeAll(3)
+                         }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "This object indicates whether the mapping of
+                     upper layer protocol encapsulation is enabled on
+                     this interworking connection.
+
+                     transparentMode(1) = Forward the encapsulations
+                                          unaltered.
+
+                     translationMode(2) = Perform mapping between the
+                                          two encapsulations due to the
+                                          incompatibilities of the two
+                                          methods. Mapping is provided
+                                          for a subset of the potential
+                                          encapsulations as itemized in
+                                          frAtmIwfConnEncapsulationMapp
+                                          ings.
+
+                     translationModeAll(3) = Perform mapping between
+                                          the two encapsulations due to
+                                          the incompatibilities of the
+                                          two methods. All
+                                          encapsulations are
+                                          translated."
+             REFERENCE
+                         "FRF.8 [17], Section 5.3"
+             DEFVAL      { transparentMode }
+             ::= { frAtmIwfConnectionDescriptorEntry 6 }
+
+         frAtmIwfConnEncapsulationMappings OBJECT-TYPE
+             SYNTAX      BITS {
+                    none (0),
+                    bridgedPdus(1),
+                    bridged802dot6(2),
+                    bPdus(3),
+                    routedIp(4),
+                    routedOsi(5),
+                    otherRouted(6),
+                    x25Iso8202(7),
+                    q933q2931(8) }
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "If upper layer protocol encapsulation mapping is
+                     enabled on this interworking connection, then this
+                     attribute enumerates which of the encapsulation
+                     mappings are supported.
+
+                     none(0)           = Transparent mode operation
+                     bridgedPdus(1)    = PID: 0x00-01,-07,-02 or -08
+                     bridged802dot6(2) = PID: 0x00-0B
+                     bPdus(3)          = PID: 0x00-0E or -0F
+                     routedIp(4)       = NLPID: OxCC
+                     routedOsi(5)      = NLPID: Ox81, 0x82 or 0x83
+                     otherRouted(6)    = Other routed protocols
+                     x25Iso8202(7)     = X25
+                     q933q2931(8)      = Q.933 and Q.2931"
+             REFERENCE
+                         "FRF.8 [17], Section 5.3.1"
+             DEFVAL      { { none } }
+             ::= { frAtmIwfConnectionDescriptorEntry 7 }
+
+         frAtmIwfConnFragAndReassEnabled OBJECT-TYPE
+             SYNTAX      INTEGER { enabled(1),  disabled(2)}
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "The attribute indicates whether fragmentation and
+                     reassembly is enabled for this connection."
+             REFERENCE
+                         "FRF.8 [17], Section 5.3.1.4"
+             DEFVAL      { disabled }
+             ::= { frAtmIwfConnectionDescriptorEntry 8 }
+
+         frAtmIwfConnArpTranslationEnabled OBJECT-TYPE
+             SYNTAX      INTEGER { enabled(1),  disabled(2)}
+             MAX-ACCESS  read-create
+             STATUS      current
+             DESCRIPTION
+                     "The attribute indicates whether ARP translation
+                     is enabled for this connection."
+             REFERENCE
+                         "FRF.8 [17], Section 5.4"
+             DEFVAL      { disabled }
+             ::= { frAtmIwfConnectionDescriptorEntry 9 }
+
+         --
+         -- Augmentation of ATM MIB VCL Endpoint Table (atmVclTable)
+         --
+         frAtmIwfVclTable OBJECT-TYPE
+             SYNTAX      SEQUENCE OF FrAtmIwfVclEntry
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "The FR/ATM IWF VCL Table augments the ATM MIB VCL
+                     Endpoint table."
+             ::= { frAtmIwfMIBObjects 5 }
+
+         frAtmIwfVclEntry OBJECT-TYPE
+             SYNTAX      FrAtmIwfVclEntry
+             MAX-ACCESS  not-accessible
+             STATUS      current
+             DESCRIPTION
+                     "Entries in this table are created only by the
+                     agent. One entry exists for each ATM VCL managed
+                     by the agent."
+             AUGMENTS    { atmVclEntry }
+             ::= { frAtmIwfVclTable 1 }
+
+         FrAtmIwfVclEntry ::= SEQUENCE {
+             frAtmIwfVclCrossConnectIdentifier    Integer32
+         }
+
+         frAtmIwfVclCrossConnectIdentifier OBJECT-TYPE
+             SYNTAX      Integer32  (1..2147483647)
+             MAX-ACCESS  read-only
+             STATUS      current
+             DESCRIPTION
+                     "This object contains the index value of the
+                     FR/ATM cross-connect table entry used to link the
+                     ATM VCL with a frame relay PVC.
+
+                     Each row of the atmVclTable that is not cross-
+                     connected with a frame relay PVC MUST return the
+                     value zero when this object is read.
+
+                     In the case of (frame relay) point to (ATM)
+                     multipoint, multiple ATM VCLs will have the same
+                     value of this object, and all their cross-
+                     connections are identified by entries that are
+                     indexed by the same value of
+                     frAtmIwfVclCrossConnectIdentifier in the
+                     frAtmIwfConnectionTable of this MIB module.
+
+                     The value of this object is initialized by the
+                     agent after the associated entries in the
+                     frAtmIwfConnectionTable have been created."
+             ::= { frAtmIwfVclEntry 1 }
+
+         --
+         -- Frame Relay/ATM PVC Service Interworking NOTIFICATION
+         --
+
+         frAtmIwfConnStatusChange NOTIFICATION-TYPE
+             OBJECTS {   frAtmIwfConnAdminStatus,
+                         frAtmIwfConnAtm2FrOperStatus,
+                         frAtmIwfConnFr2AtmOperStatus
+                      }
+             STATUS      current
+             DESCRIPTION
+                     "An indication that the status of this
+                     interworking connection has changed."
+             ::= { frAtmIwfTrapsPrefix 1 }
+
+         --
+         -- Conformance Information
+         --
+
+         --
+         -- Compliance Statement For Equipment
+         --
+
+         frAtmIwfEquipmentCompliance MODULE-COMPLIANCE
+             STATUS      current
+             DESCRIPTION
+                     "The compliance statement for equipment that
+                     implements the FR/ATM Interworking MIB."
+
+             MODULE -- this module
+                 MANDATORY-GROUPS { frAtmIwfBasicGroup,
+                                    frAtmIwfConnectionDescriptorGroup,
+                                    frAtmIwfAtmVclTableAugmentGroup,
+                                    frAtmIwfNotificationsGroup }
+
+                 OBJECT      frAtmIwfConnDeToClpMappingMode
+                 SYNTAX      INTEGER { mode1(1) }
+                 DESCRIPTION
+                     "Only support for Mode 1 is REQUIRED."
+
+                 OBJECT      frAtmIwfConnClpToDeMappingMode
+                 SYNTAX      INTEGER { mode1(1) }
+                 DESCRIPTION
+                     "Only support for Mode 1 is REQUIRED."
+
+                 OBJECT      frAtmIwfConnCongestionMappingMode
+                 SYNTAX      INTEGER { mode1(1) }
+                 DESCRIPTION
+                     "Only support for Mode 1 is REQUIRED."
+
+                 OBJECT      frAtmIwfConnEncapsulationMappingMode
+                 SYNTAX      INTEGER { transparentMode(1) }
+                 DESCRIPTION
+                     "Support for Translation Mode is OPTIONAL."
+
+                 OBJECT      frAtmIwfConnEncapsulationMappings
+                 SYNTAX      BITS { none(0) }
+                 DESCRIPTION
+                     "The IWF may provide one, some or none of the
+                     encapsulation translations defined in section
+                     5.3.1 of FRF.8 [17]."
+
+                 OBJECT      frAtmIwfConnFragAndReassEnabled
+                 SYNTAX      INTEGER { disabled(2) }
+                 DESCRIPTION
+                     "Only support for Mode 1 is REQUIRED."
+
+                 OBJECT      frAtmIwfConnArpTranslationEnabled
+                 SYNTAX      INTEGER { disabled(2) }
+                 DESCRIPTION
+                     "Support for ARP Translation is NOT REQUIRED."
+             ::= { frAtmIwfCompliances 1 }
+
+         --
+         -- Compliance Statement For Service (CNM Interface)
+         --
+
+         frAtmIwfServiceCompliance MODULE-COMPLIANCE
+             STATUS  current
+             DESCRIPTION
+                     "The compliance statement for a CNM interface that
+                     implements the FR/ATM Interworking MIB."
+
+             MODULE  -- this module
+                 MANDATORY-GROUPS { frAtmIwfBasicGroup,
+                                    frAtmIwfConnectionDescriptorGroup,
+                                    frAtmIwfAtmVclTableAugmentGroup,
+                                    frAtmIwfNotificationsGroup }
+
+                 --
+                 -- Exceptions for each object type implemented for a
+                 -- CNM view of the FR/ATM Interworking MIB
+                 --
+                 OBJECT      frAtmIwfConnAdminStatus
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Write access is not REQUIRED."
+
+                 OBJECT      frAtmIwfConnDeToClpMappingMode
+                 SYNTAX      INTEGER { mode1(1) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Support for Mode 1 is REQUIRED.  Other modes are
+                     OPTIONAL.  Write access is NOT REQUIRED."
+
+                 OBJECT      frAtmIwfConnClpToDeMappingMode
+                 SYNTAX      INTEGER { mode1(1) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Support for Mode 1 is REQUIRED.  Other modes are
+                     OPTIONAL.  Write access is NOT REQUIRED."
+
+                 OBJECT      frAtmIwfConnCongestionMappingMode
+                 SYNTAX      INTEGER { mode1(1) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Support for Mode 1 is REQUIRED.  Other modes are
+                     OPTIONAL.  Write access is NOT REQUIRED."
+
+                 OBJECT      frAtmIwfConnEncapsulationMappingMode
+                 SYNTAX      INTEGER { transparentMode(1) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Support for Transparent Mode is REQUIRED.
+                     Translation Mode is OPTIONAL.  Write access is not
+                     required."
+
+                 OBJECT      frAtmIwfConnEncapsulationMappings
+                 SYNTAX      BITS { none(0) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "The IWF may provide one, some or none of the
+                     encapsulation translations defined in section
+                     5.3.1 of FRF.8 [17]. Write access is not
+                     required."
+
+                 OBJECT      frAtmIwfConnFragAndReassEnabled
+                 SYNTAX      INTEGER { disabled(2) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Support for Fragmentation and Reassembly is NOT
+                     REQUIRED.  Write access is not required."
+
+                 OBJECT      frAtmIwfConnArpTranslationEnabled
+                 SYNTAX      INTEGER { disabled(2) }
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Support for ARP Translation is not required.
+                     Write access is not required."
+
+                 OBJECT      frAtmIwfConnRowStatus
+                 MIN-ACCESS  read-only
+                 DESCRIPTION
+                     "Write access is not required."
+             ::= { frAtmIwfCompliances 2 }
+
+         --
+         -- Units of Conformance
+         --
+
+         --
+         -- Basic FR/ATM IWF PVC Connection Group
+         --
+         frAtmIwfBasicGroup    OBJECT-GROUP
+             OBJECTS { frAtmIwfConnIndexNext,
+                       frAtmIwfConnAdminStatus,
+                       frAtmIwfConnAtm2FrOperStatus,
+                       frAtmIwfConnAtm2FrLastChange,
+                       frAtmIwfConnFr2AtmOperStatus,
+                       frAtmIwfConnFr2AtmLastChange,
+                       frAtmIwfConnectionDescriptor,
+                       frAtmIwfConnFailedFrameTranslate,
+                       frAtmIwfConnOverSizedFrames,
+                       frAtmIwfConnFailedAal5PduTranslate,
+                       frAtmIwfConnOverSizedSDUs,
+                       frAtmIwfConnCrcErrors,
+                       frAtmIwfConnSarTimeOuts,
+                       frAtmIwfConnRowStatus }
+             STATUS  current
+             DESCRIPTION
+                     "The collection of basic objects for configuration
+                     and control of FR/ATM interworking connections."
+             ::= { frAtmIwfGroups 1 }
+
+         --
+         -- FR/ATM IWF PVC Connection Descriptor Group
+         --
+
+         frAtmIwfConnectionDescriptorGroup    OBJECT-GROUP
+             OBJECTS {
+
+                 frAtmIwfConnectionDescriptorIndexNext,
+                 frAtmIwfConnDeToClpMappingMode,
+                 frAtmIwfConnClpToDeMappingMode,
+                 frAtmIwfConnCongestionMappingMode,
+                 frAtmIwfConnEncapsulationMappingMode,
+                 frAtmIwfConnEncapsulationMappings,
+                 frAtmIwfConnFragAndReassEnabled,
+                 frAtmIwfConnArpTranslationEnabled,
+                 frAtmIwfConnDescriptorRowStatus
+                 }
+             STATUS  current
+             DESCRIPTION
+                     "The collection of basic objects for specification
+                     of FR/ATM interworking connection descriptors."
+             ::= { frAtmIwfGroups 2 }
+
+         --
+         -- ATM MIB VCL Endpoint Table Augmentation Group
+         --
+
+         frAtmIwfAtmVclTableAugmentGroup    OBJECT-GROUP
+             OBJECTS {
+                 frAtmIwfVclCrossConnectIdentifier
+                 }
+             STATUS  current
+             DESCRIPTION
+                     "The ATM MIB VCL Endpoint Table AUGMENT object
+                     contained in the FR/ATM PVC Service Interworking
+                     MIB."
+             ::= { frAtmIwfGroups 3 }
+
+         --
+         -- Notification Group
+         --
+
+         frAtmIwfNotificationsGroup NOTIFICATION-GROUP
+             NOTIFICATIONS { frAtmIwfConnStatusChange }
+             STATUS  current
+             DESCRIPTION
+                     "The notification for FR/ATM interworking status
+                     change."
+             ::= { frAtmIwfGroups 4 }
+         END
diff --git a/snmp_builder/mibs/FR-MFR-MIB.mib b/snmp_builder/mibs/FR-MFR-MIB.mib
new file mode 100644
index 0000000..4b90f68
--- /dev/null
+++ b/snmp_builder/mibs/FR-MFR-MIB.mib
@@ -0,0 +1,888 @@
+FR-MFR-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
+         NOTIFICATION-TYPE, transmission
+         FROM SNMPv2-SMI
+      TEXTUAL-CONVENTION, TestAndIncr, RowStatus
+         FROM SNMPv2-TC
+      MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+         FROM SNMPv2-CONF
+      SnmpAdminString
+         FROM SNMP-FRAMEWORK-MIB
+      InterfaceIndex, ifIndex
+         FROM IF-MIB;
+
+   mfrMib MODULE-IDENTITY
+      LAST-UPDATED "200011300000Z"
+      ORGANIZATION "IETF Frame Relay Service MIB (frnetmib)
+                    Working Group"
+      CONTACT-INFO
+        "WG Charter:
+             http://www.ietf.org/html.charters/frnetmib-charter.html
+         WG-email:      frnetmib@sunroof.eng.sun.com
+         Subscribe:     frnetmib-request@sunroof.eng.sun.com
+         Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
+
+         Chair:      Andy Malis
+                     Vivace Networks
+         Email:      Andy.Malis@vivacenetworks.com
+
+         WG editor:  Prayson Pate
+                     Overture Networks
+         Email:      prayson.pate@overturenetworks.com
+
+         Co-author:  Bob Lynch
+                     Overture Networks
+
+         EMail:      bob.lynch@overturenetworks.com
+
+         Co-author:  Kenneth Rehbehn
+                     Megisto Systems, Inc.
+         EMail:      krehbehn@megisto.com"
+      DESCRIPTION
+         "This is the MIB used to control and monitor the multilink
+          frame relay (MFR) function described in FRF.16."
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Revision History
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+      REVISION "200011300000Z"
+      DESCRIPTION
+          "Published as RFC 3020."
+      ::= { transmission 47 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Textual Conventions
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   MfrBundleLinkState ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION
+         "The possible states for a bundle link, as defined in
+          Annex A of FRF.16."
+      REFERENCE "FRF.16 Annex A"
+      SYNTAX  INTEGER {
+         mfrBundleLinkStateAddSent       (1),
+         mfrBundleLinkStateAddRx         (2),
+         mfrBundleLinkStateAddAckRx      (3),
+         mfrBundleLinkStateUp            (4),
+         mfrBundleLinkStateIdlePending   (5),
+         mfrBundleLinkStateIdle          (6),
+         mfrBundleLinkStateDown          (7),
+         mfrBundleLinkStateDownIdle      (8)
+         }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Object Identifiers
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrMibScalarObjects     OBJECT IDENTIFIER ::= { mfrMib 1 }
+   mfrMibBundleObjects     OBJECT IDENTIFIER ::= { mfrMib 2 }
+   mfrMibBundleLinkObjects OBJECT IDENTIFIER ::= { mfrMib 3 }
+   mfrMibTraps             OBJECT IDENTIFIER ::= { mfrMib 4 }
+   mfrMibConformance       OBJECT IDENTIFIER ::= { mfrMib 5 }
+
+   mfrMibTrapsPrefix       OBJECT IDENTIFIER ::= { mfrMibTraps 0 }
+
+   mfrMibGroups      OBJECT IDENTIFIER ::= { mfrMibConformance 1 }
+   mfrMibCompliances OBJECT IDENTIFIER ::= { mfrMibConformance 2 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Scalars
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrBundleMaxNumBundles OBJECT-TYPE
+      SYNTAX  Integer32
+      MAX-ACCESS read-only
+      STATUS  current
+      DESCRIPTION
+         "This object is used to inform the manager of the
+          maximum number of bundles supported by this device."
+      ::= { mfrMibScalarObjects 1 }
+
+   mfrBundleNextIndex OBJECT-TYPE
+      SYNTAX  TestAndIncr
+      MAX-ACCESS read-write
+      STATUS  current
+      DESCRIPTION
+         "This object is used to assist the manager in
+          selecting a value for mfrBundleIndex during row creation
+          in the mfrBundleTable.  It can also be used to avoid race
+          conditions with multiple managers trying to create
+          rows in the table (see RFC 2494 [RFC2494] for one such
+          alogrithm)."
+      REFERENCE "RFC 2494"
+      ::= { mfrMibScalarObjects 2 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Bundle Table
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrBundleTable OBJECT-TYPE
+      SYNTAX  SEQUENCE OF MfrBundleEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "The bundle configuration and status table.  There
+          is a one-to-one correspondence between a bundle
+          and an interface represented in the ifTable.
+
+          The following objects of the ifTable have specific
+          meaning for an MFR bundle:
+             ifAdminStatus  - the bundle admin status
+             ifOperStatus   - the bundle operational status
+             ifSpeed        - the current bandwidth of the bundle
+             ifInUcastPkts  - the number of frames received
+                              on the bundle
+             ifOutUcastPkts - the number of frames transmitted
+                              on the bundle
+             ifInErrors     - frame (not fragment) errors
+             ifOutErrors    - frame (not fragment) errors
+             "
+      ::= { mfrMibBundleObjects 3 }
+
+   mfrBundleEntry OBJECT-TYPE
+      SYNTAX  MfrBundleEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "An entry in the bundle table."
+      INDEX   { mfrBundleIndex }
+      ::= { mfrBundleTable 1 }
+
+   MfrBundleEntry ::=
+      SEQUENCE {
+         mfrBundleIndex
+            Integer32,
+         mfrBundleIfIndex
+            InterfaceIndex,
+         mfrBundleRowStatus
+            RowStatus,
+         mfrBundleNearEndName
+            SnmpAdminString,
+         mfrBundleFragmentation
+            INTEGER,
+         mfrBundleMaxFragSize
+            Integer32,
+         mfrBundleTimerHello
+            INTEGER,
+         mfrBundleTimerAck
+            INTEGER,
+         mfrBundleCountMaxRetry
+            INTEGER,
+         mfrBundleActivationClass
+            INTEGER,
+         mfrBundleThreshold
+            Integer32,
+         mfrBundleMaxDiffDelay
+            Integer32,
+         mfrBundleSeqNumSize
+            INTEGER,
+         mfrBundleMaxBundleLinks
+            Integer32,
+         mfrBundleLinksConfigured
+            Integer32,
+         mfrBundleLinksActive
+            Integer32,
+         mfrBundleBandwidth
+            Integer32,
+         mfrBundleFarEndName
+            SnmpAdminString,
+         mfrBundleResequencingErrors
+            Counter32
+         }
+
+   mfrBundleIndex OBJECT-TYPE
+      SYNTAX  Integer32 (1..2147483647)
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "The index into the table.  While this corresponds
+          to an entry in the ifTable, the value of mfrBundleIndex
+          need not match that of the ifIndex in the ifTable.
+          A manager can use mfrBundleNextIndex to select a unique
+          mfrBundleIndex for creating a new row."
+      ::= { mfrBundleEntry 1 }
+
+   mfrBundleIfIndex OBJECT-TYPE
+      SYNTAX  InterfaceIndex
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The value must match an entry in the interface
+          table whose ifType must be set to frf16MfrBundle(163).
+
+          For example: if the value of mfrBundleIfIndex is 10,
+          then a corresponding entry should be present in
+
+          the ifTable with an index of 10 and an ifType of 163."
+      ::= { mfrBundleEntry 2 }
+
+   mfrBundleRowStatus OBJECT-TYPE
+      SYNTAX  RowStatus
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+          "The mfrBundleRowStatus object allows create, change,
+           and delete operations on bundle entries."
+      REFERENCE "RFC 1903"
+      ::= { mfrBundleEntry 3 }
+
+   mfrBundleNearEndName OBJECT-TYPE
+      SYNTAX  SnmpAdminString
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The configured name of the bundle."
+      REFERENCE "FRF.16 section 3.4.1"
+      ::= { mfrBundleEntry 4 }
+
+   mfrBundleFragmentation OBJECT-TYPE
+      SYNTAX  INTEGER {
+         enable  (1),
+         disable (2)
+         }
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "Controls whether the bundle performs/accepts
+          fragmentation and re-assembly.  The possible
+          values are:
+
+          enable(1) - Bundle links will fragment frames
+
+          disable(2) - Bundle links will not fragment
+                      frames."
+      DEFVAL { disable }
+      ::= { mfrBundleEntry 5 }
+
+   mfrBundleMaxFragSize OBJECT-TYPE
+      SYNTAX  Integer32 (-1..8184)
+      UNITS "Octets"
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The maximum fragment size supported.  Note that this
+
+          is only valid if mfrBundleFragmentation is set to enable(1).
+
+          Zero is not a valid fragment size.
+
+          A bundle that does not support fragmentation must return
+          this object with a value of -1."
+      DEFVAL { -1 }
+      ::= { mfrBundleEntry 6 }
+
+   mfrBundleTimerHello OBJECT-TYPE
+      SYNTAX  INTEGER (1..180)
+      UNITS "Seconds"
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The configured MFR Hello Timer value."
+      REFERENCE "FRF.16 section 4.3.8.1"
+      DEFVAL { 10 }
+      ::= { mfrBundleEntry 7 }
+
+   mfrBundleTimerAck OBJECT-TYPE
+      SYNTAX  INTEGER (1..10)
+      UNITS "Seconds"
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The configured MFR T_ACK value."
+      REFERENCE "FRF.16 section 4.3.8.2"
+      DEFVAL { 4 }
+      ::= { mfrBundleEntry 8 }
+
+   mfrBundleCountMaxRetry OBJECT-TYPE
+      SYNTAX  INTEGER (1..5)
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The MFR N_MAX_RETRY value."
+      REFERENCE "FRF.16 section 4.3.8.3"
+      DEFVAL { 2 }
+      ::= { mfrBundleEntry 9 }
+
+   mfrBundleActivationClass OBJECT-TYPE
+      SYNTAX  INTEGER {
+         mfrBundleActivationClassA (1),
+         mfrBundleActivationClassB (2),
+         mfrBundleActivationClassC (3),
+         mfrBundleActivationClassD (4)
+         }
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "Controls the conditions under which the bundle is activated.
+          The following settings are available:
+
+             mfrBundleActivationClassA(1) - at least one must link up
+             mfrBundleActivationClassB(2) - all links must be up
+             mfrBundleActivationClassC(3) - a certain number must be
+                                            up.  Refer to
+                                            mfrBundleThreshold for
+                                            the required number.
+             mfrBundleActivationClassD(4) - custom (implementation
+                                            specific)."
+      REFERENCE "FRF.16 section 4.2.2.1"
+      DEFVAL { mfrBundleActivationClassA }
+      ::= { mfrBundleEntry 10 }
+
+   mfrBundleThreshold OBJECT-TYPE
+      SYNTAX  Integer32 (-1..2147483647)
+      UNITS "Bundle Links"
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "Specifies the number of links that must be in operational
+          'up' state before the bundle will transition to an
+          operational up/active state.  If the number of
+          operational 'up' links falls below this value,
+          then the bundle will transition to an inactive
+          state.
+
+          Note - this is only valid when mfrBundleActivationClass
+          is set to mfrBundleActivationClassC or, depending upon the
+          implementation, to mfrBundleActivationClassD.  A bundle that
+          is not set to one of these must return this object with a
+          value of -1."
+      REFERENCE "FRF.16 section 4.2.2.1"
+      DEFVAL { -1 }
+      ::= { mfrBundleEntry 11 }
+
+   mfrBundleMaxDiffDelay OBJECT-TYPE
+      SYNTAX  Integer32 (-1..2147483647)
+      UNITS "Milliseconds"
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The maximum delay difference between the bundle
+          links.
+
+          A value of -1 indicates that this object does not contain
+          a valid value"
+      DEFVAL { -1 }
+      ::= { mfrBundleEntry 12 }
+
+   mfrBundleSeqNumSize OBJECT-TYPE
+      SYNTAX  INTEGER {
+          seqNumSize12bit (1),
+          seqNumSize24bit (2)
+          }
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "Controls whether the standard FRF.12 12-bit
+          sequence number is used or the optional 24-bit
+          sequence number."
+      REFERENCE "FRFTC/99-194"
+      DEFVAL { seqNumSize12bit }
+      ::= { mfrBundleEntry 13 }
+
+   mfrBundleMaxBundleLinks OBJECT-TYPE
+      SYNTAX  Integer32 (1..2147483647)
+      UNITS "Bundle Links"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The maximum number of bundle links supported for
+          this bundle."
+      ::= { mfrBundleEntry 14 }
+
+   mfrBundleLinksConfigured OBJECT-TYPE
+      SYNTAX  Integer32 (1..2147483647)
+      UNITS "Bundle Links"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The number of links configured for the bundle."
+      ::= {  mfrBundleEntry 15 }
+
+   mfrBundleLinksActive OBJECT-TYPE
+      SYNTAX  Integer32 (-1..2147483647)
+      UNITS "Bundle Links"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The number of links that are active."
+      ::= {  mfrBundleEntry 16 }
+
+   mfrBundleBandwidth OBJECT-TYPE
+       SYNTAX  Integer32
+       UNITS "Bits/Sec"
+       MAX-ACCESS  read-only
+       STATUS  current
+       DESCRIPTION
+          "The amount of available bandwidth on the bundle"
+       ::= {  mfrBundleEntry 17 }
+
+   mfrBundleFarEndName OBJECT-TYPE
+      SYNTAX  SnmpAdminString
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Name of the bundle received from the far end."
+      REFERENCE "FRF.16 section 3.4.1"
+      ::= { mfrBundleEntry 18 }
+
+   mfrBundleResequencingErrors OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Error Events"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "A count of the number of resequencing errors.  Each event
+          may correspond to multiple lost frames.  Example:
+          Say sequence number 56, 59 and 60 is received for DLCI 100.
+          It is decided by some means that sequence 57 and 58 is lost.
+          This counter should then be incremented by ONE, even though
+          two frames were lost."
+      ::= { mfrBundleEntry 19 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- ifIndex Mapping to Bundle Index Table
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrBundleIfIndexMappingTable OBJECT-TYPE
+      SYNTAX  SEQUENCE OF MfrBundleIfIndexMappingEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+          "A table mapping the values of ifIndex to the
+           mfrBundleIndex.  This is required in order to find
+           the mfrBundleIndex given an ifIndex.  The mapping of
+           mfrBundleIndex to ifIndex is provided by the
+           mfrBundleIfIndex entry in the mfrBundleTable."
+      ::= { mfrMibBundleObjects 4 }
+
+   mfrBundleIfIndexMappingEntry OBJECT-TYPE
+      SYNTAX  MfrBundleIfIndexMappingEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+           "Each row describes one ifIndex to mfrBundleIndex mapping."
+    INDEX   { ifIndex }
+    ::= { mfrBundleIfIndexMappingTable 1 }
+
+   MfrBundleIfIndexMappingEntry ::=
+      SEQUENCE {
+        mfrBundleIfIndexMappingIndex
+           Integer32
+        }
+
+   mfrBundleIfIndexMappingIndex OBJECT-TYPE
+      SYNTAX  Integer32 (1..2147483647)
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+           "The mfrBundleIndex of the given ifIndex."
+    ::= { mfrBundleIfIndexMappingEntry 2 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Bundle Link Table
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrBundleLinkTable OBJECT-TYPE
+      SYNTAX  SEQUENCE OF MfrBundleLinkEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "The bundle link configuration and status table.  There
+          is a one-to-one correspondence between a bundle link
+          and a physical interface represented in the ifTable.  The
+          ifIndex of the physical interface is used to index the
+          bundle link table, and to create rows.
+
+          The following objects of the ifTable have specific
+          meaning for an MFR bundle link:
+
+             ifAdminStatus  - the bundle link admin status
+             ifOperStatus   - the bundle link operational
+                              status
+
+             ifSpeed        - the bandwidth of the bundle
+                              link interface
+             ifInUcastPkts  - the number of frames received
+                              on the bundle link
+             ifOutUcastPkts - the number of frames transmitted
+                              on the bundle link
+             ifInErrors     - frame and fragment errors
+             ifOutErrors    - frame and fragment errors"
+      ::= { mfrMibBundleLinkObjects 1 }
+
+   mfrBundleLinkEntry OBJECT-TYPE
+      SYNTAX  MfrBundleLinkEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "An entry in the bundle link table."
+      INDEX   { ifIndex }
+      ::= { mfrBundleLinkTable 1 }
+
+   MfrBundleLinkEntry ::=
+      SEQUENCE {
+         mfrBundleLinkRowStatus
+            RowStatus,
+         mfrBundleLinkConfigBundleIndex
+            Integer32,
+         mfrBundleLinkNearEndName
+            SnmpAdminString,
+         mfrBundleLinkState
+            MfrBundleLinkState,
+         mfrBundleLinkFarEndName
+            SnmpAdminString,
+         mfrBundleLinkFarEndBundleName
+            SnmpAdminString,
+         mfrBundleLinkDelay
+            Integer32,
+         mfrBundleLinkFramesControlTx
+            Counter32,
+         mfrBundleLinkFramesControlRx
+            Counter32,
+         mfrBundleLinkFramesControlInvalid
+            Counter32,
+         mfrBundleLinkTimerExpiredCount
+            Counter32,
+         mfrBundleLinkLoopbackSuspected
+            Counter32,
+         mfrBundleLinkUnexpectedSequence
+            Counter32,
+         mfrBundleLinkMismatch
+
+            Counter32
+         }
+
+   mfrBundleLinkRowStatus OBJECT-TYPE
+      SYNTAX  RowStatus
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The mfrBundleLinkRowStatus object allows create, change,
+          and delete operations on mfrBundleLink entries.
+
+          The create operation must fail if no physical interface
+          is associated with the bundle link."
+      ::= { mfrBundleLinkEntry 1 }
+
+   mfrBundleLinkConfigBundleIndex OBJECT-TYPE
+      SYNTAX  Integer32 (1..2147483647)
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The mfrBundleLinkConfigBundleIndex object allows
+          the manager to control the bundle to which the bundle
+          link is assigned.  If no value were in this field, then
+          the bundle would remain in NOT_READY rowStatus and be
+          unable to go to active.  With an appropriate mfrBundleIndex
+          in this field, then we could put the mfrBundleLink row in
+          NOT_IN_SERVICE or ACTIVE rowStatus."
+      ::= { mfrBundleLinkEntry 2 }
+
+   mfrBundleLinkNearEndName OBJECT-TYPE
+      SYNTAX  SnmpAdminString
+      MAX-ACCESS  read-create
+      STATUS  current
+      DESCRIPTION
+         "The configured bundle link name that is sent to the far end."
+      ::= { mfrBundleLinkEntry 3 }
+
+   mfrBundleLinkState OBJECT-TYPE
+      SYNTAX  MfrBundleLinkState
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Current bundle link state as defined by the MFR protocol
+          described in Annex A of FRF.16."
+      REFERENCE "FRF.16 Annex A"
+      ::= { mfrBundleLinkEntry 4 }
+
+   mfrBundleLinkFarEndName OBJECT-TYPE
+      SYNTAX  SnmpAdminString
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Name of bundle link received from far end."
+      REFERENCE "FRF.16 section 3.4.2"
+      ::= { mfrBundleLinkEntry 5 }
+
+   mfrBundleLinkFarEndBundleName OBJECT-TYPE
+      SYNTAX  SnmpAdminString
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Name of far end bundle for this link received from far end."
+      REFERENCE "FRF.16 section 3.4.1"
+      ::= { mfrBundleLinkEntry 6 }
+
+   mfrBundleLinkDelay OBJECT-TYPE
+      SYNTAX  Integer32 (-1..2147483647)
+      UNITS "Milliseconds"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Current round-trip delay for this bundle link.  The
+          value -1 is returned when an implementation does not
+          support measurement of the bundle link delay."
+      REFERENCE "FRF.16 section 3.4.4"
+      ::= { mfrBundleLinkEntry 7 }
+
+   mfrBundleLinkFramesControlTx OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Number of MFR control frames sent."
+      REFERENCE "FRF.16 section 3.2"
+      ::= { mfrBundleLinkEntry 8 }
+
+   mfrBundleLinkFramesControlRx OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Number of valid MFR control frames received."
+      REFERENCE "FRF.16 section 3.2"
+      ::= { mfrBundleLinkEntry 9 }
+
+   mfrBundleLinkFramesControlInvalid OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The number of invalid MFR control frames received."
+      REFERENCE "FRF.16 section 3.2"
+      ::= { mfrBundleLinkEntry 10 }
+
+   mfrBundleLinkTimerExpiredCount OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Timer Expiration Events"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "Number of times the T_HELLO or T_ACK timers expired."
+      REFERENCE "FRF.16 section 4.3.8.1 and 4.3.8.2"
+      ::= { mfrBundleLinkEntry 11 }
+
+   mfrBundleLinkLoopbackSuspected OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Loopback Suspected Events"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The number of times a loopback has been suspected
+          (based upon the use of magic numbers)."
+      REFERENCE "FRF.16 section 4.3.7"
+      ::= { mfrBundleLinkEntry 12 }
+
+   mfrBundleLinkUnexpectedSequence OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Frames"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The number of data MFR frames discarded because the sequence
+          number of the frame for a DLCI was less than (delayed frame)
+          or equal to (duplicate frame) the one expected for that DLCI.
+
+          Example:
+          Say frames with sequence numbers 56, 58, 59 is received for
+          DLCI 100.  While waiting for sequence number 57 another frame
+          with sequence number 58 arrives.  Frame 58 is discarded and
+          the counter is incremented."
+      REFERENCE "FRF.16 section 4.2.3.2"
+      ::= { mfrBundleLinkEntry 13 }
+
+   mfrBundleLinkMismatch OBJECT-TYPE
+      SYNTAX  Counter32
+      UNITS "Bundle Name Mismatch Events"
+      MAX-ACCESS  read-only
+      STATUS  current
+      DESCRIPTION
+         "The number of times that the unit has been notified by the
+          remote peer that the bundle name is inconsistent with other
+          bundle links attached to the far-end bundle."
+      REFERENCE "FRF.16 section 4.3.2.4"
+      ::= { mfrBundleLinkEntry 14 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Notifications/Traps
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE
+      OBJECTS {
+         mfrBundleNearEndName,
+         mfrBundleFarEndName,
+         mfrBundleLinkNearEndName,
+         mfrBundleLinkFarEndName,
+         mfrBundleLinkFarEndBundleName
+         }
+      STATUS  current
+      DESCRIPTION
+         "This trap indicates that a bundle link mismatch has
+          been detected.  The following objects are reported:
+
+          mfrBundleNearEndName:    configured name of near end bundle
+
+          mfrBundleFarEndName:     previously reported name of
+                                far end bundle
+
+          mfrBundleLinkNearEndName: configured name of near end bundle
+
+          mfrBundleLinkFarEndName: reported name of far end bundle
+
+          mfrBundleLinkFarEndBundleName: currently reported name of
+                                far end bundle
+
+          Note: that the configured items may have been configured
+                automatically.
+
+          Note: The mfrBundleLinkMismatch counter is incremented when
+                the trap is sent."
+      REFERENCE "FRF.16 section 4.3.2.4"
+       ::= { mfrMibTrapsPrefix 1 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Conformance/Compliance
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrMibCompliance MODULE-COMPLIANCE
+      STATUS      current
+      DESCRIPTION
+         "The compliance statement for equipment that implements
+          the FRF16 MIB.  All of the current groups are mandatory,
+          but a number of objects may be read-only if the
+          implementation does not allow configuration."
+      MODULE -- this module
+      MANDATORY-GROUPS {
+         mfrMibBundleGroup,
+         mfrMibBundleLinkGroup,
+         mfrMibTrapGroup
+         }
+
+      OBJECT     mfrBundleFragmentation
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required, but the value used must be
+           reported."
+
+      OBJECT     mfrBundleMaxFragSize
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required, but the value used must be
+           reported.
+           A value of -1 indicates that the value is not applicable."
+
+      OBJECT     mfrBundleThreshold
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required, but the value used must be
+           reported.
+           A value of -1 indicates that the value is not applicable."
+
+      OBJECT     mfrBundleMaxDiffDelay
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required, but the value used must be
+           reported."
+
+      OBJECT     mfrBundleSeqNumSize
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required, but the value used must be
+           reported.
+           A value of -1 indicates that the value is not applicable."
+      ::= { mfrMibCompliances 1 }
+
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+   -- Units of Conformance
+   -- ---------------------------------------------------------
+   -- ---------------------------------------------------------
+
+   mfrMibBundleGroup OBJECT-GROUP
+      OBJECTS {
+         mfrBundleMaxNumBundles,
+         mfrBundleNextIndex,
+         mfrBundleIfIndex,
+         mfrBundleRowStatus,
+         mfrBundleNearEndName,
+         mfrBundleFragmentation,
+         mfrBundleMaxFragSize,
+         mfrBundleTimerHello,
+         mfrBundleTimerAck,
+         mfrBundleCountMaxRetry,
+         mfrBundleActivationClass,
+         mfrBundleThreshold,
+         mfrBundleMaxDiffDelay,
+         mfrBundleMaxBundleLinks,
+         mfrBundleLinksConfigured,
+         mfrBundleLinksActive,
+         mfrBundleBandwidth,
+         mfrBundleSeqNumSize,
+         mfrBundleFarEndName,
+         mfrBundleResequencingErrors,
+         mfrBundleIfIndexMappingIndex
+         }
+      STATUS current
+      DESCRIPTION
+          "Group of objects describing bundles."
+      ::= { mfrMibGroups 1 }
+
+   mfrMibBundleLinkGroup   OBJECT-GROUP
+      OBJECTS {
+         mfrBundleLinkRowStatus,
+         mfrBundleLinkConfigBundleIndex,
+         mfrBundleLinkNearEndName,
+         mfrBundleLinkState,
+         mfrBundleLinkFarEndName,
+         mfrBundleLinkFarEndBundleName,
+         mfrBundleLinkDelay,
+         mfrBundleLinkFramesControlTx,
+         mfrBundleLinkFramesControlRx,
+         mfrBundleLinkFramesControlInvalid,
+         mfrBundleLinkTimerExpiredCount,
+         mfrBundleLinkLoopbackSuspected,
+         mfrBundleLinkUnexpectedSequence,
+         mfrBundleLinkMismatch
+         }
+      STATUS current
+      DESCRIPTION
+          "Group of objects describing bundle links."
+      ::= { mfrMibGroups 2 }
+
+   mfrMibTrapGroup NOTIFICATION-GROUP
+      NOTIFICATIONS {
+         mfrMibTrapBundleLinkMismatch
+         }
+      STATUS current
+      DESCRIPTION
+          "Group of objects describing notifications (traps)."
+      ::= { mfrMibGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/FRAME-RELAY-DTE-MIB.mib b/snmp_builder/mibs/FRAME-RELAY-DTE-MIB.mib
new file mode 100644
index 0000000..17a2fc3
--- /dev/null
+++ b/snmp_builder/mibs/FRAME-RELAY-DTE-MIB.mib
@@ -0,0 +1,992 @@
+FRAME-RELAY-DTE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+            MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+            Integer32, NOTIFICATION-TYPE            FROM SNMPv2-SMI
+            TEXTUAL-CONVENTION, RowStatus, TimeStamp FROM SNMPv2-TC
+            MODULE-COMPLIANCE, OBJECT-GROUP,
+            NOTIFICATION-GROUP                     FROM SNMPv2-CONF
+            transmission                           FROM RFC1213-MIB
+            InterfaceIndex                           FROM IF-MIB;
+
+--  Frame Relay DTE MIB
+
+frameRelayDTE MODULE-IDENTITY
+    LAST-UPDATED "9705010229Z" -- Thu May  1 02:29:46 PDT 1997
+    ORGANIZATION "IETF IPLPDN Working Group"
+    CONTACT-INFO
+       "       Caralyn Brown
+       Postal: Cadia Networks, Inc.
+               1 Corporate Drive
+               Andover, Massachusetts  01810
+       Tel:    +1 508 689 2400 x133
+       E-Mail: cbrown@cadia.com
+
+               Fred Baker
+       Postal: Cisco Systems
+               519 Lado Drive
+               Santa Barbara, California 93111
+       Tel:    +1 408 526 425
+       E-Mail: fred@cisco.com"
+    DESCRIPTION
+       "The MIB module to describe the use of a Frame Relay
+       interface by a DTE."
+    REVISION "9705010229Z" -- Thu May  1 02:29:46 PDT 1997
+    DESCRIPTION
+       "Converted from SMIv1 to SMIv2. (Thus, indices are
+       read-only rather than being not-accessible.) Added
+       objects and made clarifications based on implementation
+       experience."
+
+    REVISION "9204010000Z"
+    DESCRIPTION
+       "Published as RFC 1315, the initial version of this MIB
+       module."
+    ::= { transmission 32 }
+
+--
+--      the range of a Data Link Connection Identifier
+--
+DLCI ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "The range of DLCI values.  Note that this varies by
+       interface configuration; normally, interfaces may use
+       0..1023, but may be configured to use ranges as large
+       as 0..2^23."
+    SYNTAX      Integer32(0..8388607)
+
+--
+
+--  Data Link Connection Management Interface
+
+--      The variables that configure the DLC Management Interface.
+
+frDlcmiTable OBJECT-TYPE
+    SYNTAX   SEQUENCE OF FrDlcmiEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "The Parameters for the Data Link Connection Management
+       Interface for the frame relay service on this
+       interface."
+    REFERENCE
+       "American National Standard T1.617-1991, Annex D"
+    ::= { frameRelayDTE 1 }
+
+frDlcmiEntry OBJECT-TYPE
+    SYNTAX   FrDlcmiEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "The Parameters for a particular Data Link Connection
+       Management Interface."
+    INDEX { frDlcmiIfIndex }
+    ::= { frDlcmiTable 1 }
+
+FrDlcmiEntry ::=
+    SEQUENCE {
+        frDlcmiIfIndex                  InterfaceIndex,
+        frDlcmiState                    INTEGER,
+        frDlcmiAddress                  INTEGER,
+        frDlcmiAddressLen               INTEGER,
+        frDlcmiPollingInterval          Integer32,
+        frDlcmiFullEnquiryInterval      Integer32,
+        frDlcmiErrorThreshold           Integer32,
+        frDlcmiMonitoredEvents          Integer32,
+        frDlcmiMaxSupportedVCs          DLCI,
+        frDlcmiMulticast                INTEGER,
+        frDlcmiStatus                   INTEGER,
+        frDlcmiRowStatus                RowStatus
+}
+
+frDlcmiIfIndex OBJECT-TYPE
+    SYNTAX   InterfaceIndex
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The ifIndex value of the corresponding ifEntry."
+    ::= { frDlcmiEntry 1 }
+
+frDlcmiState OBJECT-TYPE
+    SYNTAX INTEGER      {
+        noLmiConfigured (1),
+        lmiRev1         (2),
+        ansiT1617D      (3),  -- ANSI T1.617 Annex D
+        ansiT1617B      (4),  -- ANSI T1.617 Annex B
+        itut933A        (5),  -- CCITT Q933 Annex A
+        ansiT1617D1994  (6)   -- ANSI T1.617a-1994 Annex D
+    }
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This variable states which Data Link Connection
+       Management scheme is active (and by implication, what
+       DLCI it uses) on the Frame Relay interface."
+    REFERENCE
+       "American National Standard T1.617-1991, American
+       National Standard T1.617a-1994, ITU-T Recommendation
+       Q.933 (03/93)."
+    ::= { frDlcmiEntry 2 }
+
+frDlcmiAddress OBJECT-TYPE
+    SYNTAX      INTEGER {
+                q921           (1),  -- 13 bit DLCI
+                q922March90    (2),  -- 11 bit DLCI
+                q922November90 (3),  -- 10 bit DLCI
+                q922           (4)   -- Final Standard
+    }
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+       "This variable states which address format is in use on
+       the Frame Relay interface."
+    ::= { frDlcmiEntry 3 }
+
+frDlcmiAddressLen OBJECT-TYPE
+    SYNTAX  INTEGER     {
+            twoOctets (2),
+            threeOctets (3),
+            fourOctets (4)
+    }
+    MAX-ACCESS  read-create
+    STATUS  current
+    DESCRIPTION
+       "This variable states the address length in octets.  In
+       the case of Q922 format, the length indicates the
+       entire length of the address including the control
+       portion."
+    ::= { frDlcmiEntry 4 }
+
+frDlcmiPollingInterval OBJECT-TYPE
+    SYNTAX   Integer32 (5..30)
+    UNITS    "seconds"
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This is the number of seconds between successive
+       status enquiry messages."
+    REFERENCE
+       "American National Standard T1.617-1991, Section D.7
+       Timer T391."
+    DEFVAL { 10 }
+    ::= { frDlcmiEntry 5 }
+
+frDlcmiFullEnquiryInterval OBJECT-TYPE
+    SYNTAX   Integer32 (1..255)
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "Number of status enquiry intervals that pass before
+       issuance of a full status enquiry message."
+    REFERENCE
+       "American National Standard T1.617-1991, Section D.7
+       Counter N391."
+    DEFVAL { 6 }
+    ::= { frDlcmiEntry 6 }
+
+frDlcmiErrorThreshold OBJECT-TYPE
+    SYNTAX   Integer32 (1..10)
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This is the maximum number of unanswered Status
+       Enquiries the equipment shall accept before declaring
+       the interface down."
+    REFERENCE
+       "American National Standard T1.617-1991, Section D.5.1
+       Counter N392."
+    DEFVAL { 3 }
+    ::= { frDlcmiEntry 7 }
+
+frDlcmiMonitoredEvents OBJECT-TYPE
+    SYNTAX   Integer32 (1..10)
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This is the number of status polling intervals over
+       which the error threshold is counted.  For example, if
+       within 'MonitoredEvents' number of events the station
+       receives 'ErrorThreshold' number of errors, the
+       interface is marked as down."
+    REFERENCE
+       "American National Standard T1.617-1991, Section D.5.2
+       Counter N393."
+    DEFVAL { 4 }
+    ::= { frDlcmiEntry 8 }
+
+frDlcmiMaxSupportedVCs OBJECT-TYPE
+    SYNTAX   DLCI
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "The maximum number of Virtual Circuits allowed for
+       this interface.  Usually dictated by the Frame Relay
+       network.
+
+       In response to a SET, if a value less than zero or
+       higher than the agent's maximal capability is
+       configured, the agent should respond badValue"
+    ::= { frDlcmiEntry 9 }
+
+frDlcmiMulticast OBJECT-TYPE
+    SYNTAX   INTEGER    {
+                nonBroadcast (1),
+                broadcast (2)
+                }
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This indicates whether the Frame Relay interface is
+       using a multicast service."
+    ::= { frDlcmiEntry 10 }
+
+frDlcmiStatus OBJECT-TYPE
+    SYNTAX   INTEGER    {
+                running      (1),    -- init complete, system running
+                fault        (2),    -- error threshold exceeded
+                initializing (3)     -- system start up
+                }
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "This indicates the status of the Frame Relay interface
+       as determined by the performance of the dlcmi.  If no
+       dlcmi is running, the Frame Relay interface will stay
+       in the running state indefinitely."
+    ::= { frDlcmiEntry 11 }
+
+frDlcmiRowStatus OBJECT-TYPE
+    SYNTAX   RowStatus
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "SNMP Version 2 Row Status Variable.  Writable objects
+       in the table may be written in any RowStatus state."
+    ::= { frDlcmiEntry 12 }
+
+--
+-- A Frame Relay service is a multiplexing service.  Data
+-- Link Connection Identifiers enumerate virtual circuits
+-- (permanent or dynamic) which are layered onto the underlying
+-- circuit, represented by ifEntry.  Therefore, each of the entries
+-- in the Standard MIB's Interface Table with an IfType of
+-- Frame Relay represents a Q.922 interface.  Zero or more
+-- virtual circuits are layered onto this interface and provide
+-- interconnection with various remote destinations.
+-- Each such virtual circuit is represented by an entry in the
+-- circuit table.  The management virtual circuit (i.e. DLCI 0)
+-- is a virtual circuit by this definition and will be represented
+-- with an entry in the circuit table.
+
+--   Circuit Table
+
+-- The table describing the use of the DLCIs attached to
+-- each Frame Relay Interface.
+
+frCircuitTable OBJECT-TYPE
+    SYNTAX   SEQUENCE OF FrCircuitEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "A table containing information about specific Data
+       Link Connections (DLC) or virtual circuits."
+    ::= { frameRelayDTE 2 }
+
+frCircuitEntry OBJECT-TYPE
+    SYNTAX   FrCircuitEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "The information regarding a single Data Link
+       Connection.  Discontinuities in the counters contained
+       in this table are indicated by the value in
+       frCircuitCreationTime."
+    INDEX { frCircuitIfIndex, frCircuitDlci }
+    ::= { frCircuitTable 1 }
+
+FrCircuitEntry ::=
+    SEQUENCE {
+        frCircuitIfIndex                InterfaceIndex,
+        frCircuitDlci                   DLCI,
+        frCircuitState                  INTEGER,
+        frCircuitReceivedFECNs          Counter32,
+        frCircuitReceivedBECNs          Counter32,
+        frCircuitSentFrames             Counter32,
+        frCircuitSentOctets             Counter32,
+        frCircuitReceivedFrames         Counter32,
+        frCircuitReceivedOctets         Counter32,
+        frCircuitCreationTime           TimeStamp,
+        frCircuitLastTimeChange         TimeStamp,
+        frCircuitCommittedBurst         Integer32,
+        frCircuitExcessBurst            Integer32,
+        frCircuitThroughput             Integer32,
+        frCircuitMulticast              INTEGER,
+        frCircuitType                   INTEGER,
+        frCircuitDiscards               Counter32,
+        frCircuitReceivedDEs            Counter32,
+        frCircuitSentDEs                Counter32,
+        frCircuitLogicalIfIndex         InterfaceIndex,
+        frCircuitRowStatus              RowStatus
+}
+
+frCircuitIfIndex OBJECT-TYPE
+    SYNTAX   InterfaceIndex
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The ifIndex Value of the ifEntry this virtual circuit
+       is layered onto."
+    ::= { frCircuitEntry 1 }
+
+frCircuitDlci OBJECT-TYPE
+    SYNTAX   DLCI
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The Data Link Connection Identifier for this virtual
+       circuit."
+    REFERENCE
+       "American National Standard T1.618-1991, Section 3.3.6"
+    ::= { frCircuitEntry 2 }
+
+frCircuitState OBJECT-TYPE
+    SYNTAX   INTEGER    {
+
+                invalid (1),
+                active (2),
+                inactive (3)
+             }
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "Indicates whether the particular virtual circuit is
+       operational.  In the absence of a Data Link Connection
+       Management Interface, virtual circuit entries (rows)
+       may be created by setting virtual circuit state to
+       'active', or deleted by changing Circuit state to
+       'invalid'.
+
+       Whether or not the row actually disappears is left to
+       the implementation, so this object may actually read as
+       'invalid' for some arbitrary length of time.  It is
+       also legal to set the state of a virtual circuit to
+       'inactive' to temporarily disable a given circuit.
+
+       The use of 'invalid' is deprecated in this SNMP Version
+       2 MIB, in favor of frCircuitRowStatus."
+    DEFVAL { active }
+    ::= { frCircuitEntry 3 }
+
+frCircuitReceivedFECNs OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Number of frames received from the network indicating
+       forward congestion since the virtual circuit was
+       created.  This occurs when the remote DTE sets the FECN
+       flag, or when a switch in the network enqueues the
+       frame to a trunk whose transmission queue is
+       congested."
+    REFERENCE
+       "American National Standard T1.618-1991, Section 3.3.3"
+    ::= { frCircuitEntry 4 }
+
+frCircuitReceivedBECNs OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Number of frames received from the network indicating
+       backward congestion since the virtual circuit was
+       created.  This occurs when the remote DTE sets the BECN
+       flag, or when a switch in the network receives the
+       frame from a trunk whose transmission queue is
+       congested."
+    REFERENCE
+       "American National Standard T1.618-1991, Section 3.3.4"
+    ::= { frCircuitEntry 5 }
+
+frCircuitSentFrames OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The number of frames sent from this virtual circuit
+       since it was created."
+    ::= { frCircuitEntry 6 }
+
+frCircuitSentOctets OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The number of octets sent from this virtual circuit
+       since it was created.  Octets counted are the full
+       frame relay header and the payload, but do not include
+       the flag characters or CRC."
+    ::= { frCircuitEntry 7 }
+
+frCircuitReceivedFrames OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Number of frames received over this virtual circuit
+       since it was created."
+    ::= { frCircuitEntry 8 }
+
+frCircuitReceivedOctets OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Number of octets received over this virtual circuit
+       since it was created.  Octets counted include the full
+       frame relay header, but do not include the flag
+       characters or the CRC."
+    ::= { frCircuitEntry 9 }
+
+frCircuitCreationTime OBJECT-TYPE
+    SYNTAX   TimeStamp
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The value of sysUpTime when the virtual circuit was
+       created, whether by the Data Link Connection Management
+       Interface or by a SetRequest."
+    ::= { frCircuitEntry 10 }
+
+frCircuitLastTimeChange OBJECT-TYPE
+    SYNTAX   TimeStamp
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The value of sysUpTime when last there was a change in
+       the virtual circuit state"
+    ::= { frCircuitEntry 11 }
+
+frCircuitCommittedBurst OBJECT-TYPE
+    SYNTAX   Integer32(0..2147483647)
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This variable indicates the maximum amount of data, in
+       bits, that the network agrees to transfer under normal
+       conditions, during the measurement interval."
+    REFERENCE
+       "American National Standard T1.617-1991, Section
+       6.5.19"
+    DEFVAL   { 0 }  -- the default indicates no commitment
+    ::= { frCircuitEntry 12 }
+
+frCircuitExcessBurst OBJECT-TYPE
+    SYNTAX   Integer32(0..2147483647)
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This variable indicates the maximum amount of
+       uncommitted data bits that the network will attempt to
+       deliver over the measurement interval.
+
+       By default, if not configured when creating the entry,
+       the Excess Information Burst Size is set to the value
+       of ifSpeed."
+    REFERENCE
+       "American National Standard T1.617-1991, Section
+       6.5.19"
+    ::= { frCircuitEntry 13 }
+
+frCircuitThroughput OBJECT-TYPE
+    SYNTAX   Integer32(0..2147483647)
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "Throughput is the average number of 'Frame Relay
+       Information Field' bits transferred per second across a
+       user network interface in one direction, measured over
+       the measurement interval.
+
+       If the configured committed burst rate and throughput
+       are both non-zero, the measurement interval, T, is
+           T=frCircuitCommittedBurst/frCircuitThroughput.
+
+       If the configured committed burst rate and throughput
+       are both zero, the measurement interval, T, is
+                  T=frCircuitExcessBurst/ifSpeed."
+    REFERENCE
+       "American National Standard T1.617-1991, Section
+       6.5.19"
+    DEFVAL {0}  -- the default value of Throughput is
+                -- "no commitment".
+    ::= { frCircuitEntry 14 }
+
+frCircuitMulticast OBJECT-TYPE
+    SYNTAX   INTEGER    {
+                unicast   (1),
+                oneWay    (2),
+                twoWay    (3),
+                nWay      (4)
+                }
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This indicates whether this VC is used as a unicast VC
+       (i.e. not multicast) or the type of multicast service
+       subscribed to"
+    REFERENCE
+       "Frame Relay PVC Multicast Service and Protocol
+       Description Implementation: FRF.7 Frame Relay Forum
+       Technical Committe October 21, 1994"
+         DEFVAL {unicast}
+                     -- the default value of frCircuitMulticast is
+                     -- "unicast" (not a multicast VC).
+         ::= { frCircuitEntry 15 }
+
+frCircuitType OBJECT-TYPE
+    SYNTAX   INTEGER    {
+                static  (1),
+                dynamic (2)
+             }
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Indication of whether the VC was manually created
+       (static), or dynamically created (dynamic) via the data
+       link control management interface."
+    ::= { frCircuitEntry 16 }
+
+frCircuitDiscards OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The number of inbound frames dropped because of format
+       errors, or because the VC is inactive."
+    ::= { frCircuitEntry 17 }
+
+frCircuitReceivedDEs OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Number of frames received from the network indicating
+       that they were eligible for discard since the virtual
+       circuit was created.  This occurs when the remote DTE
+       sets the DE flag, or when in remote DTE's switch
+       detects that the frame was received as Excess Burst
+       data."
+    REFERENCE
+       "American National Standard T1.618-1991, Section 3.3.4"
+    ::= { frCircuitEntry 18 }
+
+frCircuitSentDEs OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "Number of frames sent to the network indicating that
+       they were eligible for discard since the virtual
+       circuit was created.   This occurs when the local DTE
+       sets the DE flag, indicating that during Network
+       congestion situations those frames should be discarded
+       in preference of other frames sent without the DE bit
+       set."
+    REFERENCE
+       "American National  Standard  T1.618-1991, Section
+       3.3.4"
+   ::= { frCircuitEntry 19 }
+
+frCircuitLogicalIfIndex OBJECT-TYPE
+    SYNTAX  InterfaceIndex
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+       "Normally the same value as frDlcmiIfIndex, but
+       different when an implementation associates a virtual
+       ifEntry with a DLC or set of DLCs in order to associate
+       higher layer objects such as the ipAddrEntry with a
+       subset of the virtual circuits on a Frame Relay
+       interface. The type of such ifEntries is defined by the
+       higher layer object; for example, if PPP/Frame Relay is
+       implemented, the ifType of this ifEntry would be PPP.
+       If it is not so defined, as would be the case with an
+       ipAddrEntry, it should be of type Other."
+   ::= { frCircuitEntry 20 }
+
+frCircuitRowStatus OBJECT-TYPE
+    SYNTAX   RowStatus
+    MAX-ACCESS   read-create
+    STATUS   current
+    DESCRIPTION
+       "This object is used to create a new row or modify or
+       destroy an existing row in the manner described in the
+       definition of the RowStatus textual convention.
+       Writable objects in the table may be written in any
+       RowStatus state."
+    ::= { frCircuitEntry 21 }
+
+--
+--  Error Table
+
+-- The table describing errors encountered on each Frame
+-- Relay Interface.
+
+frErrTable OBJECT-TYPE
+    SYNTAX   SEQUENCE OF FrErrEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "A table containing information about Errors on the
+       Frame Relay interface.  Discontinuities in the counters
+       contained in this table are the same as apply to the
+
+       ifEntry associated with the Interface."
+    ::= { frameRelayDTE 3 }
+
+frErrEntry OBJECT-TYPE
+    SYNTAX   FrErrEntry
+    MAX-ACCESS   not-accessible
+    STATUS   current
+    DESCRIPTION
+       "The error information for a single frame relay
+       interface."
+    INDEX { frErrIfIndex }
+    ::= { frErrTable 1 }
+
+FrErrEntry ::=
+    SEQUENCE {
+        frErrIfIndex            InterfaceIndex,
+        frErrType               INTEGER,
+        frErrData               OCTET STRING,
+        frErrTime               TimeStamp,
+        frErrFaults             Counter32,
+        frErrFaultTime          TimeStamp
+}
+
+frErrIfIndex OBJECT-TYPE
+    SYNTAX   InterfaceIndex
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The ifIndex Value of the corresponding ifEntry."
+    ::= { frErrEntry 1 }
+
+    frErrType OBJECT-TYPE
+        SYNTAX   INTEGER    {
+                    unknownError(1),
+                    receiveShort(2),
+                    receiveLong(3),
+                    illegalAddress(4),
+                    unknownAddress(5),
+                    dlcmiProtoErr(6),
+                    dlcmiUnknownIE(7),
+                    dlcmiSequenceErr(8),
+                    dlcmiUnknownRpt(9),
+                    noErrorSinceReset(10)
+                 }
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+"The type of error that was last seen  on  this interface:
+
+receiveShort: frame was not long enough to allow
+        demultiplexing - the address field was incomplete,
+        or for virtual circuits using Multiprotocol over
+        Frame Relay, the protocol identifier was missing
+        or incomplete.
+
+receiveLong: frame exceeded maximum length configured for this
+             interface.
+
+illegalAddress: address field did not match configured format.
+
+unknownAddress: frame received on a virtual circuit which was not
+                active or administratively disabled.
+
+dlcmiProtoErr: unspecified error occurred when attempting to
+               interpret link maintenance frame.
+
+dlcmiUnknownIE: link maintenance frame contained an Information
+                Element type which is not valid for the
+                configured link maintenance protocol.
+
+dlcmiSequenceErr: link maintenance frame contained a sequence
+                  number other than the expected value.
+
+dlcmiUnknownRpt: link maintenance frame contained a Report Type
+                 Information Element whose value was not valid
+                 for the configured link maintenance protocol.
+
+noErrorSinceReset: no errors have been detected since the last
+                   cold start or warm start."
+    ::= { frErrEntry 2 }
+
+frErrData OBJECT-TYPE
+    SYNTAX   OCTET STRING (SIZE(1..1600))
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "An octet string containing as much of the error packet
+       as possible.  As a minimum, it must contain the Q.922
+       Address or as much as was delivered.  It is desirable
+       to include all header and demultiplexing information."
+    ::= { frErrEntry 3 }
+
+frErrTime OBJECT-TYPE
+    SYNTAX   TimeStamp
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The value of sysUpTime at which the error was
+       detected."
+    ::= { frErrEntry 4 }
+
+frErrFaults OBJECT-TYPE
+    SYNTAX   Counter32
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The number of times the interface has gone down since
+       it was initialized."
+    ::= { frErrEntry 5 }
+
+frErrFaultTime OBJECT-TYPE
+    SYNTAX   TimeStamp
+    MAX-ACCESS   read-only
+    STATUS   current
+    DESCRIPTION
+       "The value of sysUpTime at the time when the interface
+       was taken down due to excessive errors.  Excessive
+       errors is defined as the time when a DLCMI exceeds the
+       frDlcmiErrorThreshold number of errors within
+       frDlcmiMonitoredEvents. See FrDlcmiEntry for further
+       details."
+    ::= { frErrEntry 6 }
+
+--
+
+-- Frame Relay Trap Control
+
+frameRelayTrapControl OBJECT IDENTIFIER ::= { frameRelayDTE 4 }
+
+-- the following highly unusual OID is as it is for compatibility
+-- with RFC 1315, the SNMP V1 predecessor of this document.
+frameRelayTraps OBJECT IDENTIFIER ::= { frameRelayDTE 0 }
+
+frTrapState OBJECT-TYPE
+    SYNTAX  INTEGER     { enabled(1), disabled(2) }
+    MAX-ACCESS   read-write
+    STATUS   current
+    DESCRIPTION
+       "This variable indicates whether the system produces
+       the frDLCIStatusChange trap."
+    DEFVAL { disabled }
+    ::= { frameRelayTrapControl 1 }
+
+frTrapMaxRate OBJECT-TYPE
+    SYNTAX  Integer32 (0..3600000)
+    MAX-ACCESS   read-write
+    STATUS   current
+    DESCRIPTION
+       "This variable indicates the number of milliseconds
+       that must elapse between trap emissions.  If events
+       occur more rapidly, the impementation may simply fail
+       to trap, or may queue traps until an appropriate time."
+    DEFVAL { 0 }        -- no minimum elapsed period is specified
+    ::= { frameRelayTrapControl 2 }
+
+--  Data Link Connection Management Interface Related Traps
+
+frDLCIStatusChange NOTIFICATION-TYPE
+    OBJECTS  { frCircuitState }
+    STATUS      current
+    DESCRIPTION
+       "This trap indicates that the indicated Virtual Circuit
+       has changed state.  It has either been created or
+       invalidated, or has toggled between the active and
+       inactive states.  If, however, the reason for the state
+       change is due to the DLCMI going down, per-DLCI traps
+       should not be generated."
+::= { frameRelayTraps 1 }
+-- conformance information
+
+frConformance OBJECT IDENTIFIER ::= { frameRelayDTE 6 }
+
+frGroups      OBJECT IDENTIFIER ::= { frConformance 1 }
+frCompliances OBJECT IDENTIFIER ::= { frConformance 2 }
+
+-- compliance statements
+
+frCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+       "The compliance statement "
+    MODULE  -- this module
+    MANDATORY-GROUPS { frPortGroup, frCircuitGroup }
+
+    GROUP       frErrGroup
+    DESCRIPTION
+       "This optional group is used for debugging Frame Relay
+       Systems."
+
+    GROUP       frTrapGroup
+    DESCRIPTION
+       "This optional group is used for the management of
+       asynchronous notifications by Frame Relay Systems."
+
+    GROUP       frNotificationGroup
+    DESCRIPTION
+       "This optional group defines the asynchronous
+       notifications generated by Frame Relay Systems."
+
+    OBJECT      frDlcmiRowStatus
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Row creation is not required for the frDlcmiTable."
+
+    OBJECT      frCircuitRowStatus
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Row creation is not required for the frCircuitTable."
+    ::= { frCompliances 1 }
+
+frCompliance0 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+       "The compliance statement for objects and the trap
+       defined in RFC 1315."
+    MODULE  -- this module
+    MANDATORY-GROUPS { frPortGroup0, frCircuitGroup0 }
+
+    GROUP       frErrGroup0
+    DESCRIPTION
+       "This optional group is used for debugging Frame Relay
+       Systems."
+
+    GROUP       frTrapGroup0
+    DESCRIPTION
+       "This optional group is used for the management of
+       asynchronous notifications by Frame Relay Systems."
+
+    GROUP       frNotificationGroup
+    DESCRIPTION
+       "This optional group defines the asynchronous
+       notifications generated by Frame Relay Systems."
+    ::= { frCompliances 2 }
+
+-- units of conformance
+
+frPortGroup    OBJECT-GROUP
+    OBJECTS {
+              frDlcmiIfIndex, frDlcmiState, frDlcmiAddress,
+              frDlcmiAddressLen, frDlcmiPollingInterval,
+              frDlcmiFullEnquiryInterval, frDlcmiErrorThreshold,
+              frDlcmiMonitoredEvents, frDlcmiMaxSupportedVCs,
+              frDlcmiMulticast, frDlcmiStatus, frDlcmiRowStatus
+           }
+    STATUS  current
+    DESCRIPTION
+       "The objects necessary to control the Link Management
+       Interface for a Frame Relay Interface as well as
+       maintain the error statistics on this interface."
+    ::= { frGroups 1 }
+
+frCircuitGroup    OBJECT-GROUP
+    OBJECTS {
+              frCircuitIfIndex, frCircuitDlci, frCircuitState,
+              frCircuitReceivedFECNs, frCircuitReceivedBECNs,
+              frCircuitSentFrames, frCircuitSentOctets,
+              frCircuitReceivedFrames, frCircuitReceivedOctets,
+              frCircuitCreationTime, frCircuitLastTimeChange,
+              frCircuitCommittedBurst, frCircuitExcessBurst,
+              frCircuitThroughput, frCircuitMulticast,
+              frCircuitType, frCircuitDiscards,
+              frCircuitReceivedDEs, frCircuitSentDEs,
+              frCircuitLogicalIfIndex, frCircuitRowStatus
+            }
+    STATUS  current
+    DESCRIPTION
+       "The objects necessary to control the Virtual Circuits
+       layered onto a Frame Relay Interface."
+    ::= { frGroups 2 }
+
+frTrapGroup    OBJECT-GROUP
+    OBJECTS { frTrapState, frTrapMaxRate }
+    STATUS  current
+    DESCRIPTION
+       "The objects necessary to control a Frame Relay
+       Interface's notification messages."
+    ::= { frGroups 3 }
+
+frErrGroup    OBJECT-GROUP
+    OBJECTS {
+              frErrIfIndex, frErrType, frErrData, frErrTime,
+              frErrFaults, frErrFaultTime
+           }
+    STATUS  current
+    DESCRIPTION
+       "Objects designed to assist in debugging Frame Relay
+       Interfaces."
+    ::= { frGroups 4 }
+
+frNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { frDLCIStatusChange }
+    STATUS  current
+    DESCRIPTION
+       "Traps which may be used to enhance event driven
+       management of the interface."
+    ::= { frGroups 5 }
+
+frPortGroup0    OBJECT-GROUP
+    OBJECTS {
+              frDlcmiIfIndex, frDlcmiState, frDlcmiAddress,
+              frDlcmiAddressLen, frDlcmiPollingInterval,
+              frDlcmiFullEnquiryInterval, frDlcmiErrorThreshold,
+              frDlcmiMonitoredEvents, frDlcmiMaxSupportedVCs,
+              frDlcmiMulticast
+           }
+    STATUS  current
+    DESCRIPTION
+       "The objects necessary to control the Link Management
+       Interface for a Frame Relay Interface as well as
+       maintain the error statistics on this interface from
+       RFC 1315."
+    ::= { frGroups 6 }
+
+frCircuitGroup0    OBJECT-GROUP
+    OBJECTS {
+              frCircuitIfIndex, frCircuitDlci, frCircuitState,
+              frCircuitReceivedFECNs, frCircuitReceivedBECNs,
+              frCircuitSentFrames, frCircuitSentOctets,
+              frCircuitReceivedFrames, frCircuitReceivedOctets,
+              frCircuitCreationTime, frCircuitLastTimeChange,
+              frCircuitCommittedBurst, frCircuitExcessBurst,
+              frCircuitThroughput
+            }
+    STATUS  current
+    DESCRIPTION
+       "The objects necessary to control the Virtual Circuits
+       layered onto a Frame Relay Interface from RFC 1315."
+    ::= { frGroups 7 }
+
+frErrGroup0    OBJECT-GROUP
+    OBJECTS {
+              frErrIfIndex, frErrType, frErrData, frErrTime
+           }
+    STATUS  current
+    DESCRIPTION
+       "Objects designed to assist in debugging Frame Relay
+       Interfaces from RFC 1315."
+    ::= { frGroups 8 }
+
+frTrapGroup0    OBJECT-GROUP
+    OBJECTS { frTrapState }
+    STATUS  current
+    DESCRIPTION
+       "The objects necessary to control a Frame Relay
+       Interface's notification messages from RFC 1315."
+    ::= { frGroups 9 }
+
+END
diff --git a/snmp_builder/mibs/FRNETSERV-MIB.mib b/snmp_builder/mibs/FRNETSERV-MIB.mib
new file mode 100644
index 0000000..68728a4
--- /dev/null
+++ b/snmp_builder/mibs/FRNETSERV-MIB.mib
@@ -0,0 +1,2479 @@
+FRNETSERV-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+              MODULE-IDENTITY, OBJECT-TYPE,
+              NOTIFICATION-TYPE, transmission,
+              Counter32, Integer32             FROM SNMPv2-SMI
+              TimeStamp, RowStatus             FROM SNMPv2-TC
+              MODULE-COMPLIANCE, OBJECT-GROUP,
+              NOTIFICATION-GROUP               FROM SNMPv2-CONF
+              InterfaceIndex, ifIndex          FROM IF-MIB
+              SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB;
+
+        frnetservMIB MODULE-IDENTITY
+            LAST-UPDATED "200009280000Z" -- September 28, 2000
+            ORGANIZATION "IETF Frame Relay Service MIB Working Group"
+            CONTACT-INFO
+                "WG Charter:
+                   http://www.ietf.org/html.charters/frnetmib-charter
+                 WG-email:
+                   frnetmib@sunroof.eng.sun.com
+
+                 Subscribe:
+                   frnetmib-request@sunroof.eng.sun.com
+                 Email Archive:
+                   ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
+
+                 Chair:      Andy Malis
+                             Vivace Networks, Inc.
+                 Email:      Andy.Malis@vivacenetworks.com
+
+                 WG editor:  Kenneth Rehbehn
+                             Megisto Systems, Inc.
+                 Email:      krehbehn@megisto.com
+
+                 Co-author:  David Fowler
+                             Syndesis Limited,
+                 EMail:      fowler@syndesis.com"
+            DESCRIPTION
+                 "The MIB module to describe generic objects for
+                  Frame Relay Network Service."
+
+            --
+            -- Revision History
+            --
+            REVISION "200009280000Z"
+            DESCRIPTION
+                 "Published as RFC 2954.
+
+                 The major new features of this revision include:
+
+                     o  Support for read-write capability to
+                        provision switch components providing service,
+                     o  Support for cross-connection via a frame relay
+                        to ATM service interworking function,
+                     o  Support for frame relay fragmentation,
+                     o  Additional frame counters to track frame
+                        loss.
+
+                 Refer to Appendix A for a comprehensive list of
+                 changes since RFC 1604."
+
+            REVISION "199311161200Z"
+            DESCRIPTION
+                 "Published as RFC 1604."
+            ::= { transmission 44 }
+
+            frnetservObjects
+                OBJECT IDENTIFIER ::= { frnetservMIB 1 }
+
+            frnetservTraps
+                OBJECT IDENTIFIER ::= { frnetservMIB 2 }
+
+            frnetservTrapsPrefix
+                OBJECT IDENTIFIER ::= { frnetservTraps 0 }
+
+        --
+        -- The Frame Relay Service Logical Port
+        --
+        frLportTable OBJECT-TYPE
+            SYNTAX      SEQUENCE OF FrLportEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The Frame Relay Logical Port Information table is
+                    an interface-specific addendum to the generic
+                    ifTable of the Interface MIB."
+            ::= { frnetservObjects 1 }
+
+        frLportEntry OBJECT-TYPE
+            SYNTAX      FrLportEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "An entry in the Frame Relay Logical Port
+                    Information table."
+            INDEX   {   ifIndex }
+            ::= { frLportTable 1 }
+
+        FrLportEntry ::=
+            SEQUENCE {
+                frLportNumPlan            INTEGER,
+                frLportContact            SnmpAdminString,
+                frLportLocation           SnmpAdminString,
+                frLportType               INTEGER,
+                frLportAddrDLCILen        INTEGER,
+                frLportVCSigProtocol      INTEGER,
+                frLportVCSigPointer       OBJECT IDENTIFIER,
+                frLportDLCIIndexValue     Integer32,
+                frLportTypeAdmin          INTEGER,
+                frLportVCSigProtocolAdmin INTEGER,
+                frLportFragControl        INTEGER,
+                frLportFragSize           Integer32
+        }
+
+        frLportNumPlan OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        other(1),
+                        e164(2),
+                        x121(3),
+                        none(4)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the network
+                    address numbering plan for this UNI/NNI logical
+                    port. The network address is the object
+                    ifPhysAddress. The value none(4) implies that
+                    there is no ifPhysAddress.  The FRS agent will
+                    return an octet string of zero length for
+                    ifPhysAddress.  The value other(1) means that an
+                    address has been assigned to this interface, but
+                    the numbering plan is not enumerated here."
+            REFERENCE   "E.164 [29]
+                         X.121 [30]"
+            ::= { frLportEntry 1 }
+
+        frLportContact  OBJECT-TYPE
+            SYNTAX      SnmpAdminString
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the network
+                    contact for this UNI/NNI logical port."
+            ::= { frLportEntry 2 }
+
+        frLportLocation OBJECT-TYPE
+            SYNTAX      SnmpAdminString
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the frame
+                    relay network location for this UNI/NNI logical
+                    port."
+            ::= { frLportEntry 3 }
+
+        frLportType     OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        uni(1),
+                        nni(2)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the type of
+                    network interface for this logical port."
+            ::= { frLportEntry 4 }
+
+        frLportAddrDLCILen OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        twoOctets10Bits(1),
+                        threeOctets10Bits(2),
+                        threeOctets16Bits(3),
+                        fourOctets17Bits(4),
+                        fourOctets23Bits(5)
+                        }
+            UNITS       "Octets"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Q.922
+                    Address field length and DLCI length for this
+                    UNI/NNI logical port."
+            REFERENCE   "Q.922 [25]"
+            ::= { frLportEntry 5 }
+
+        frLportVCSigProtocol OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        none(1),
+                        lmi(2),
+                        ansiT1617D(3),
+                        ansiT1617B(4),
+                        ccittQ933A(5)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Local
+                    In-Channel Signaling Protocol that is used for
+                    this frame relay UNI/NNI logical port.
+
+                    none(1):        Interface does not use a PVC
+                                    signaling protocol
+
+                    lmi(2):         Interface operates the Stratacom/
+                                    Nortel/DEC Local Management
+                                    Interface Specification protocol
+
+                    ansiT1617D(3):  Interface operates the ANSI T1.617
+                                    Annex D PVC status protocol
+
+                      ansiT1617B(4):  Interface operates the ANSI
+T1.617
+                                      Annex B procedures
+
+                      ccittQ933A(5):  Interface operates the ITU Q.933
+                                      Annex A PVC status protocol"
+              REFERENCE   "LMI [24]
+                           T1.617 Annex D [17],
+                           Q.933 Annex A [22]"
+              ::= { frLportEntry 6 }
+
+        frLportVCSigPointer OBJECT-TYPE
+            SYNTAX      OBJECT IDENTIFIER
+            MAX-ACCESS  read-only
+            STATUS      deprecated
+            DESCRIPTION
+                    "The value of this object is used as a pointer to
+                    the table that contains the Local In-Channel
+                    Signaling Protocol parameters and errors for this
+                    UNI/NNI logical port.
+
+                    This object has been deprecated to reflect the
+                    fact that the local in-channel signaling
+                    parameters are accessed from a single table
+                    (frMgtVCSigTable) that includes parameters for all
+                    possible signaling protocols.  Early design
+                    anticipated multiple tables, one for each
+                    signaling protocol."
+            ::= { frLportEntry 7 }
+
+        frLportDLCIIndexValue OBJECT-TYPE
+            SYNTAX      Integer32 (16..4194303)
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "This object contains a hint to be used for
+                    frPVCEndptDLCIIndex when creating entries in the
+                    frPVCEndptTable.  The SYNTAX of this object
+                    matches the SYNTAX of the frPVCEndptDLCIIndex - an
+                    object that is restricted to legal Q.922 DLCI
+                    values for the size of the address field.
+
+                    The value 0 indicates that no unassigned entries
+                    are available.
+
+                    To obtain the frPVCEndptDLCIIndex value for a new
+                    entry, the manager issues a management protocol
+                    retrieval operation to obtain the current value of
+
+                    this object.  After each retrieval, the agent must
+                    modify the value to the next unassigned index to
+                    prevent assignment of the same value to multiple
+                    management systems.
+
+                    A management system should repeat the read to
+                    obtain a new value should an attempt to create the
+                    new row using the previously returned hint fail."
+            REFERENCE   "Q.922 [25]"
+            ::= { frLportEntry 8 }
+
+        frLportTypeAdmin   OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        uni(1),
+                        nni(2)
+                        }
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object desired identifies the
+                    type of network interface for this logical port."
+              ::= { frLportEntry 9 }
+
+        frLportVCSigProtocolAdmin OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        none(1),
+                        lmi(2),
+                        ansiT1617D(3),
+                        ansiT1617B(4),
+                        ccittQ933A(5)
+                        }
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    Local In-Channel Signaling Protocol that is used
+                    for this frame relay UNI/NNI logical port.  This
+                    value must be made the active protocol as soon as
+                    possible on the device.
+
+                    Refer to frLportVCSigProtocol for a description of
+                    each signaling protocol choices."
+            REFERENCE   "LMI [24]
+                         T1.617 Annex D [17],
+                         Q.933 Annex A [22]"
+            ::= { frLportEntry 10 }
+
+        frLportFragControl OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        on(1),
+                        off(2)
+                        }
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "This object controls the transmission and
+                    reception of fragmentation frames for this UNI or
+                    NNI interface.
+
+                    on(1)   Frames are fragmented using the interface
+                            fragmentation format
+                            Note:  The customer side of the interface
+                            must also be configured to fragment
+                            frames.
+
+                    off(2)  Frames are not fragmented using the
+                            interface fragmentation format."
+            REFERENCE   "FRF.12 [21]"
+            DEFVAL { off }
+            ::= { frLportEntry 11 }
+
+        frLportFragSize OBJECT-TYPE
+            SYNTAX      Integer32 (0..4096)
+            UNITS       "Octets"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is the size in octets of
+                    the maximum size of each fragment to be sent when
+                    fragmenting.  This object is only used by the
+                    fragmentation transmitter, and the two sides of
+                    the interface may differ.  The fragment size
+                    includes the octets for the frame relay header,
+                    the UI octet, the NLPID, the fragmentation header,
+                    and the fragment payload. If frLportFragControl is
+                    set to off, this value should be zero."
+            REFERENCE   "FRF.12 [21]"
+            DEFVAL { 0 }
+            ::= { frLportEntry 12 }
+
+        --
+        -- Frame Relay Management VC Signaling
+        --
+
+        frMgtVCSigTable OBJECT-TYPE
+            SYNTAX      SEQUENCE OF FrMgtVCSigEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The Frame Relay Management VC Signaling
+                    Parameters and Errors table."
+            ::= { frnetservObjects 2 }
+
+        frMgtVCSigEntry OBJECT-TYPE
+            SYNTAX      FrMgtVCSigEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "An entry in the Frame Relay Management VC
+                    Signaling Parameters Errors table."
+            INDEX       { ifIndex }
+            ::= { frMgtVCSigTable 1 }
+
+        FrMgtVCSigEntry ::=
+            SEQUENCE {
+                frMgtVCSigProced             INTEGER,
+                frMgtVCSigUserN391           INTEGER,
+                frMgtVCSigUserN392           INTEGER,
+                frMgtVCSigUserN393           INTEGER,
+                frMgtVCSigUserT391           INTEGER,
+                frMgtVCSigNetN392            INTEGER,
+                frMgtVCSigNetN393            INTEGER,
+                frMgtVCSigNetT392            INTEGER,
+                frMgtVCSigNetnN4             INTEGER,
+                frMgtVCSigNetnT3             INTEGER,
+                frMgtVCSigUserLinkRelErrors  Counter32,
+                frMgtVCSigUserProtErrors     Counter32,
+                frMgtVCSigUserChanInactive   Counter32,
+                frMgtVCSigNetLinkRelErrors   Counter32,
+                frMgtVCSigNetProtErrors      Counter32,
+                frMgtVCSigNetChanInactive    Counter32,
+                frMgtVCSigProcedAdmin        INTEGER,
+                frMgtVCSigUserN391Admin      INTEGER,
+                frMgtVCSigUserN392Admin      INTEGER,
+                frMgtVCSigUserN393Admin      INTEGER,
+                frMgtVCSigUserT391Admin      INTEGER,
+                frMgtVCSigNetN392Admin       INTEGER,
+                frMgtVCSigNetN393Admin       INTEGER,
+                frMgtVCSigNetT392Admin       INTEGER,
+                frMgtVCSigNetnT3Admin        INTEGER
+        }
+
+        frMgtVCSigProced OBJECT-TYPE
+            SYNTAX      INTEGER {
+
+                        u2nnet(1),
+                        bidirect(2),
+                        u2nuser(3)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the local
+                    in-channel signaling procedural role that is used
+                    for this UNI/NNI logical port.  Bidirectional
+                    procedures implies that both user-side and
+                    network-side procedural roles are used.
+
+                    u2nnet(1)   Logical port operates user to network
+                                procedure in the role of the network
+                                side
+
+                    bidirect(2) Logical port operates the
+                                bidirectional procedure (both user
+                                and network side roles)
+
+                    u2nuser(3)  Logical port operates user to network
+                                procedure in the role of the user
+                                side"
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            ::= { frMgtVCSigEntry 1 }
+
+        frMgtVCSigUserN391 OBJECT-TYPE
+            SYNTAX      INTEGER (1..255)
+            UNITS       "Polls"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the User-side
+                    N391 full status polling cycle value for this
+                    UNI/NNI logical port.  If the logical port is not
+                    performing user-side (bidirectional) procedures,
+                    then this object is not instantiated and an
+                    attempt to read will result in the noSuchInstance
+                    exception response."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            DEFVAL { 6 }
+            ::= { frMgtVCSigEntry 2 }
+
+        frMgtVCSigUserN392 OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the User-side
+                    N392 error threshold value for this UNI/NNI
+                    logical port.  If the logical port is not
+                    performing user-side (bidirectional) procedures,
+                    then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            DEFVAL { 3 }
+            ::= { frMgtVCSigEntry 3 }
+
+        frMgtVCSigUserN393 OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the User-side
+                    N393 monitored events count value for this UNI/NNI
+                    logical port.  If the logical port is not
+                    performing user-side (bidirectional) procedures,
+                    then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            DEFVAL { 4 }
+            ::= { frMgtVCSigEntry 4 }
+
+        frMgtVCSigUserT391 OBJECT-TYPE
+            SYNTAX      INTEGER (5..30)
+            UNITS       "Seconds"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the User-side
+                    T391 link integrity verification polling timer
+                    value for this UNI/NNI logical port.  If the
+                    logical port is not performing user-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            DEFVAL { 10 }
+            ::= { frMgtVCSigEntry 5 }
+
+        frMgtVCSigNetN392 OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Network-
+                    side N392 error threshold value (nN2 for LMI) for
+                    this UNI/NNI logical port.  If the logical port is
+                    not performing network-side procedures, then this
+                    object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17],
+                         LMI [24]"
+            DEFVAL { 3 }
+            ::= { frMgtVCSigEntry 6 }
+
+        frMgtVCSigNetN393 OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Network-
+                    side N393 monitored events count value (nN3 for
+                    LMI) for this UNI/NNI logical port.  If the
+                    logical port is not performing network-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17],
+                         LMI [24]"
+            DEFVAL { 4 }
+            ::= { frMgtVCSigEntry 7 }
+
+        frMgtVCSigNetT392 OBJECT-TYPE
+            SYNTAX      INTEGER (5..30)
+            UNITS       "Seconds"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Network-
+                    side T392 polling verification timer value (nT2
+                    for LMI)  for this UNI/NNI logical port.  If the
+                    logical port is not performing network-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17],
+                         LMI [24]"
+            DEFVAL { 15 }
+            ::= { frMgtVCSigEntry 8 }
+
+        frMgtVCSigNetnN4 OBJECT-TYPE
+            SYNTAX      INTEGER (5..5)
+            UNITS       "Events"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Network-
+                    side nN4 maximum status enquires received value
+                    for this UNI/NNI logical port.  If the logical
+                    port is not performing network-side procedures or
+                    is not performing LMI procedures, then this object
+                    is not instantiated.
+
+                    This object applies only to LMI and always has a
+                    value of 5."
+            REFERENCE   "LMI [24]"
+            ::= { frMgtVCSigEntry 9 }
+
+        frMgtVCSigNetnT3 OBJECT-TYPE
+            SYNTAX      INTEGER (5 | 10 | 15 | 20 | 25 | 30)
+            UNITS       "Seconds"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the Network-
+                    side nT3 timer (for nN4 status enquires received)
+                    value for this UNI/NNI logical port.  If the
+                    logical port is not performing network-side
+                    procedures or is not performing LMI procedures,
+                    then this object is not instantiated.
+
+                      This object applies only to LMI."
+              REFERENCE   "LMI [24]"
+              DEFVAL { 20 }
+              ::= { frMgtVCSigEntry 10 }
+
+        frMgtVCSigUserLinkRelErrors OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Errors"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of user-side local in-channel
+                    signaling link reliability errors (i.e., non-
+                    receipt of Status/Status Enquiry messages or
+                    invalid sequence numbers in a Link Integrity
+                    Verification Information Element) for this UNI/NNI
+                    logical port.  If the logical port is not
+
+                    performing user-side procedures, then this object
+                    is not instantiated."
+            ::= { frMgtVCSigEntry 11 }
+
+        frMgtVCSigUserProtErrors OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Errors"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of user-side local in-channel
+                    signaling protocol errors (i.e., protocol
+                    discriminator, unnumbered information, message
+                    type, call reference, and mandatory information
+                    element errors) for this UNI/NNI logical port. If
+                    the logical port is not performing user-side
+                    procedures, then this object is not instantiated."
+            ::= { frMgtVCSigEntry 12 }
+
+      frMgtVCSigUserChanInactive OBJECT-TYPE
+          SYNTAX      Counter32
+          UNITS       "Events"
+          MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of times the user-side channel was
+                    declared inactive (i.e., N392 errors in N393
+                    events) for this UNI/NNI logical port. If the
+                    logical port is not performing user-side
+                    procedures, then this object is not instantiated."
+            ::= { frMgtVCSigEntry 13 }
+
+        frMgtVCSigNetLinkRelErrors OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Errors"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of network-side local in-channel
+                    signaling link reliability errors (i.e., non-
+                    receipt of Status/Status Enquiry messages or
+                    invalid sequence numbers in a Link Integrity
+                    Verification Information Element) for this UNI/NNI
+                    logical port."
+            ::= { frMgtVCSigEntry 14 }
+
+        frMgtVCSigNetProtErrors OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Errors"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of network-side local in-channel
+                    signaling protocol errors (i.e., protocol
+                    discriminator, message type, call reference, and
+                    mandatory information element errors) for this
+                    UNI/NNI logical port."
+            ::= { frMgtVCSigEntry 15 }
+
+        frMgtVCSigNetChanInactive OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Events"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of times the network-side channel was
+                    declared inactive (i.e., N392 errors in N393
+                    events) for this UNI/NNI logical port."
+            ::= { frMgtVCSigEntry 16 }
+
+        frMgtVCSigProcedAdmin OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        u2nnet(1),
+                        bidirect(2),
+                        u2nuser(3)
+                        }
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the local
+                    in-channel signaling procedural role that is used
+                    for this UNI/NNI logical port.  Bidirectional
+                    procedures implies that both user-side and
+                    network-side procedural roles are used.
+
+                    u2nnet(1)   Logical port operates user to network
+                                procedure in the role of the network
+                                side
+
+                    bidirect(2) Logical port operates the
+                                bidirectional procedure (both user
+                                and network side roles)
+
+                    u2nuser(3)  Logical port operates user to network
+                                procedure in the role of the user
+                                side"
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            DEFVAL { u2nnet }
+            ::= { frMgtVCSigEntry 17 }
+
+        frMgtVCSigUserN391Admin OBJECT-TYPE
+            SYNTAX      INTEGER (1..255)
+            UNITS       "Polls"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    User-side N391 full status polling cycle value for
+                    this UNI/NNI logical port.  If the logical port is
+                    not performing user-side (bidirectional)
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            ::= { frMgtVCSigEntry 18 }
+
+        frMgtVCSigUserN392Admin OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    User-side N392 error threshold value for this
+                    UNI/NNI logical port.  If the logical port is not
+                    performing user-side (bidirectional) procedures,
+                    then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            ::= { frMgtVCSigEntry 19 }
+
+        frMgtVCSigUserN393Admin OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    User-side N393 monitored events count value for
+                    this UNI/NNI logical port.  If the logical port is
+                    not performing user-side (bidirectional)
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            ::= { frMgtVCSigEntry 20 }
+
+        frMgtVCSigUserT391Admin OBJECT-TYPE
+            SYNTAX      INTEGER (5..30)
+            UNITS       "Seconds"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    User-side T391 link integrity verification polling
+                    timer value for this UNI/NNI logical port.  If the
+                    logical port is not performing user-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17]"
+            ::= { frMgtVCSigEntry 21 }
+
+        frMgtVCSigNetN392Admin OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    Network-side N392 error threshold value (nN2 for
+                    LMI) for this UNI/NNI logical port.  If the
+                    logical port is not performing network-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17],
+                         LMI [24]"
+            ::= { frMgtVCSigEntry 22 }
+
+        frMgtVCSigNetN393Admin OBJECT-TYPE
+            SYNTAX      INTEGER (1..10)
+            UNITS       "Events"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    Network-side N393 monitored events count value
+                    (nN3 for LMI) for this UNI/NNI logical port.  If
+                    the logical port is not performing network-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17],
+                         LMI [24]"
+            ::= { frMgtVCSigEntry 23 }
+
+        frMgtVCSigNetT392Admin OBJECT-TYPE
+            SYNTAX      INTEGER (5..30)
+            UNITS       "Seconds"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    Network-side T392 polling verification timer value
+                    (nT2 for LMI)  for this UNI/NNI logical port. If
+                    the logical port is not performing network-side
+                    procedures, then this object is not instantiated."
+            REFERENCE   "Q.933 Annex A [22],
+                         T1.617 Annex D [17],
+                         LMI [24]"
+            ::= { frMgtVCSigEntry 24 }
+
+        frMgtVCSigNetnT3Admin OBJECT-TYPE
+            SYNTAX      INTEGER (5 | 10 | 15 | 20 | 25 | 30)
+            UNITS       "Seconds"
+            MAX-ACCESS  read-write
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    Network-side nT3 timer (for nN4 status enquires
+                    received) value for this UNI/NNI logical port. If
+                    the logical port is not performing network-side
+                    procedures or is not performing LMI procedures,
+                    then this object is not instantiated.  This object
+                    applies only to LMI."
+            REFERENCE   "LMI [24]"
+            ::= { frMgtVCSigEntry 25 }
+
+        --
+        -- Frame Relay PVC End-points
+        --
+
+        frPVCEndptTable OBJECT-TYPE
+            SYNTAX      SEQUENCE OF FrPVCEndptEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The Frame Relay PVC End-Point table.  This table
+                    is used to model a PVC end-point.  This table
+                    contains the traffic parameters and statistics for
+                    a PVC end-point.
+
+                    This table is used to identify the traffic
+                    parameters for a bi-directional PVC segment end-
+
+                    point, and it also provides statistics for a PVC
+                    segment end-point.
+
+                    A PVC segment end-point is identified by a UNI/NNI
+                    logical port index value and DLCI index value.
+
+                    If the frame relay service provider allows the
+                    frame relay CNM subscriber to create, modify or
+                    delete PVCs using SNMP, then this table is used to
+                    identify and reserve the requested traffic
+                    parameters of each PVC segment end-point.  The
+                    Connection table is used to 'connect' the end-
+                    points together.  Not all implementations will
+                    support the capability of
+                    creating/modifying/deleting PVCs using SNMP as a
+                    feature of frame relay CNM service.
+
+                    Uni-directional PVCs are modeled with zero valued
+                    traffic parameters in one of the directions (In or
+                     Out direction) in this table.
+
+                    To create a PVC, the following procedures shall be
+                    followed:
+
+                    1)  Create the entries for the PVC segment
+                        endpoints in the frPVCEndptTable by specifying
+                        the traffic parameters for the bi-directional
+                        PVC segment endpoints. As shown in figure 2, a
+                        point-to-point PVC has two endpoints, thus two
+                        entries in this table.  Uni-directional PVCs
+                        are modeled with zero valued traffic
+                        parameters in one direction; all the `In'
+                        direction parameters for one frame relay PVC
+                        End-point or all the `Out' direction
+                        parameters for the other frame relay PVC
+                        Endpoint.
+
+                        In    _____________________________  Out
+                       >>>>>>|                             |>>>>>>>>
+                       ______|    Frame Relay Network      |________
+                        Out  |                             |  In
+                       <<<<<<|_____________________________|<<<<<<<<
+                     Frame Relay                         Frame Relay
+                         PVC                                 PVC
+                       Endpoint                            Endpoint
+
+                                Figure 2, PVC Terminology
+
+                    2)  Go to the Frame Relay Connection Group."
+            ::= { frnetservObjects 3 }
+
+        frPVCEndptEntry OBJECT-TYPE
+            SYNTAX      FrPVCEndptEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "An entry in the Frame Relay PVC Endpoint table."
+            INDEX   { ifIndex, frPVCEndptDLCIIndex }
+            ::= { frPVCEndptTable 1 }
+
+        FrPVCEndptEntry ::=
+            SEQUENCE {
+                frPVCEndptDLCIIndex            Integer32,
+                frPVCEndptInMaxFrameSize       Integer32,
+                frPVCEndptInBc                 Integer32,
+                frPVCEndptInBe                 Integer32,
+                frPVCEndptInCIR                Integer32,
+                frPVCEndptOutMaxFrameSize      Integer32,
+                frPVCEndptOutBc                Integer32,
+                frPVCEndptOutBe                Integer32,
+                frPVCEndptOutCIR               Integer32,
+                frPVCEndptConnectIdentifier    Integer32,
+                frPVCEndptRowStatus            RowStatus,
+                frPVCEndptRcvdSigStatus        INTEGER,
+                frPVCEndptInFrames             Counter32,
+                frPVCEndptOutFrames            Counter32,
+                frPVCEndptInDEFrames           Counter32,
+                frPVCEndptInExcessFrames       Counter32,
+                frPVCEndptOutExcessFrames      Counter32,
+                frPVCEndptInDiscards           Counter32,
+                frPVCEndptInOctets             Counter32,
+                frPVCEndptOutOctets            Counter32,
+                frPVCEndptInDiscardsDESet      Counter32,
+                frPVCEndptInFramesFECNSet      Counter32,
+                frPVCEndptOutFramesFECNSet     Counter32,
+                frPVCEndptInFramesBECNSet      Counter32,
+                frPVCEndptOutFramesBECNSet     Counter32,
+                frPVCEndptInCongDiscards       Counter32,
+                frPVCEndptInDECongDiscards     Counter32,
+                frPVCEndptOutCongDiscards      Counter32,
+                frPVCEndptOutDECongDiscards    Counter32,
+                frPVCEndptOutDEFrames          Counter32,
+                frPVCEndptAtmIwfConnIndex      Integer32
+
+            }
+
+        frPVCEndptDLCIIndex OBJECT-TYPE
+            SYNTAX      Integer32 (16..4194303)
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the DLCI
+                    value for this PVC end-point.
+
+                    The values are restricted to the legal range for
+                    the size of address field supported by the logical
+                    port (frLportAddrDLCILen)."
+            REFERENCE   "Q.922 [25]"
+            ::= { frPVCEndptEntry 1 }
+
+        frPVCEndptInMaxFrameSize OBJECT-TYPE
+            SYNTAX      Integer32 (1..4096)
+            UNITS       "Octets"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is the size in octets of
+                    the largest frame relay information field for this
+                    PVC end-point in the ingress direction (into the
+                    frame relay network).  The value of
+                    frPVCEndptInMaxFrameSize must be less than or
+                    equal to the corresponding ifMtu for this frame
+                    relay UNI/NNI logical port."
+            REFERENCE   "FRF.1 [31]
+                         Q.922 [25]
+                         Q.933 [22]"
+            DEFVAL { 1600 }
+            ::= { frPVCEndptEntry 2 }
+
+        frPVCEndptInBc OBJECT-TYPE
+            SYNTAX      Integer32 (1..2147483647)
+            UNITS       "Bits"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the
+                    committed burst size (Bc) parameter (measured in
+                    bits) for this PVC end-point in the ingress
+                    direction (into the frame relay network).
+
+                    Note that the max value of this range is lower
+                    than the max value allowed by Q.933 (16383 *
+                    10**6).
+
+                    Note that the value is encoded in bits whilst the
+                    Q.933 Link layer core parameters information
+                    element encodes this information using octet
+                    units."
+            REFERENCE   "Q.933 [22]"
+            ::= { frPVCEndptEntry 3 }
+
+        frPVCEndptInBe OBJECT-TYPE
+            SYNTAX      Integer32 (1..2147483647)
+            UNITS       "Bits"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the excess
+                    burst size (Be) parameter (measured in bits) for
+                    this PVC end-point in the ingress direction (into
+                    the frame relay network).
+
+                    Note that the max value of this range is lower
+                    than the max value allowed by Q.933 (16383 *
+                    10**6).
+
+                    Note that the value is encoded in bits whilst the
+                    Q.933 Link layer core parameters information
+                    element encodes this information using octet
+                    units."
+            REFERENCE   "Q.933 [22]"
+            ::= { frPVCEndptEntry 4 }
+
+        frPVCEndptInCIR OBJECT-TYPE
+            SYNTAX      Integer32 (1..2147483647)
+            UNITS       "Bits per Second"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the
+                    committed information rate (CIR) parameter
+                    (measured in bits per second) for this PVC end-
+                    point in the ingress direction (into the frame
+                    relay network).
+
+                    Note that the max value of this range is lower
+                    than the max value allowed by Q.933 (2047 *
+                    10**6)."
+            REFERENCE   "Q.933 [22]"
+            ::= { frPVCEndptEntry 5 }
+
+        frPVCEndptOutMaxFrameSize OBJECT-TYPE
+            SYNTAX      Integer32 (1..4096)
+            UNITS       "Octets"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is the size in octets of
+                    the largest frame relay information field for this
+                    PVC end-point in the egress direction (out of the
+                    frame relay network).  The value of
+                    frPVCEndptOutMaxFrameSize must be less than or
+                    equal to the corresponding ifMtu for this frame
+                    relay UNI/NNI logical port."
+            REFERENCE   "FRF.1 [31]
+                         Q.922 [25]
+                         Q.933 [22]"
+            DEFVAL { 1600 }
+            ::= { frPVCEndptEntry 6 }
+
+        frPVCEndptOutBc OBJECT-TYPE
+            SYNTAX      Integer32 (1..2147483647)
+            UNITS       "Bits"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the
+                    committed burst size (Bc) parameter (measured in
+                    bits) for this PVC end-point in the egress
+                    direction (out of the frame relay network).
+
+                    Note that the max value of this range is lower
+                    than the max value allowed by Q.933 (16383 *
+                    10**6).
+
+                    Note that the value is encoded in bits whilst the
+                    Q.933 Link layer core parameters information
+                    element encodes this information using octet
+                    units."
+            REFERENCE   "Q.933 [22]"
+            ::= { frPVCEndptEntry 7 }
+
+        frPVCEndptOutBe OBJECT-TYPE
+            SYNTAX      Integer32 (1..2147483647)
+            UNITS       "Bits"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the excess
+                    burst size (Be) parameter (measured in bits) for
+
+                    this PVC end-point in the egress direction (out of
+                    the frame relay network).
+
+                    Note that the max value of this range is lower
+                    than the max value allowed by Q.933 (16383 *
+                    10**6).
+
+                    Note that the value is encoded in bits whilst the
+                    Q.933 Link layer core parameters information
+                    element encodes this information using octet
+                    units."
+            REFERENCE   "Q.933 [22]"
+            ::= { frPVCEndptEntry 8 }
+
+        frPVCEndptOutCIR OBJECT-TYPE
+            SYNTAX      Integer32 (1..2147483647)
+            UNITS       "Bits per Second"
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the
+                    committed information rate (CIR) parameter
+                    (measured in bits per second) for this PVC end-
+                    point in the egress direction (out of the frame
+                    relay network).
+
+                    Note that the max value of this range is lower
+                    than the max value allowed by Q.933 (2047 *
+                    10**6)."
+            REFERENCE   "Q.933 [22]"
+            ::= { frPVCEndptEntry 9 }
+
+        frPVCEndptConnectIdentifier OBJECT-TYPE
+            SYNTAX      Integer32 (0..2147483647)
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "This object is used to associate PVC end-points
+                    as being part of one PVC segment connection. This
+                    value of this object is equal to the value of
+                    frPVCConnectIndex, which is used as one of the
+                    indices into the frPVCConnectTable.
+
+                    A connection that has been cross-connected via the
+                    FR/ATM PVC Service IWF cross-connect table will
+                    return the value zero when this object is read. In
+                    case of these interworked connections, the
+                    frPVCEndptAtmIwfConnIndex object must be accessed
+
+                    to select the entry in the FR/ATM PVC Service IWF
+                    cross-connect table.
+
+                    The value of this object is provided by the agent,
+                    after the associated entries in the
+                    frPVCConnectTable or frAtmIwfConnectionTable have
+                    been created."
+            ::= { frPVCEndptEntry 10 }
+
+        frPVCEndptRowStatus OBJECT-TYPE
+            SYNTAX      RowStatus
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "This object is used to create new rows in this
+                    table, modify existing rows, and to delete
+                    existing rows.  To create a new PVC, the entries
+                    for the PVC segment end-points in the
+                    frPVCEndptTable must first be created.  Next, the
+                    frPVCConnectTable is used to associate the frame
+                    relay PVC segment end-points.  In order for the
+                    manager to have the necessary error diagnostics,
+                    the frPVCEndptRowStatus object must initially be
+                    set to `createAndWait(5)'.  While the
+                    frPVCEndptRowStatus object is in the
+                    `createAndWait(5)' state, the manager can set each
+                    columnar object and get the necessary error
+                    diagnostics.  The frPVCEndptRowStatus object may
+                    not be set to `active(1)' unless the following
+                    columnar objects exist in this row:
+                    frPVCEndptInMaxFrameSize, frPVCEndptInBc,
+                    frPVCEndptInBe, frPVCEndptInCIR,
+                    frPVCEndptOutMaxFrameSize, frPVCEndptOutBc,
+                    frPVCEndptOutBe, and frPVCEndptOutCIR."
+            ::= { frPVCEndptEntry 11 }
+
+        frPVCEndptRcvdSigStatus OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        deleted(1),
+                        active(2),
+                        inactive(3),
+                        none(4)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the PVC
+                    status received via the local in-channel signaling
+
+                    procedures for this PVC end-point.  This object is
+                    only pertinent for interfaces that perform the
+                    bidirectional procedures.
+
+                    Each value has the following meaning:
+                      deleted(1):  This PVC is not listed in the full
+                                   status reports received from the
+                                   user device.  The object retains
+                                   this value for as long as the PVC
+                                   is not listed in the full status
+                                   reports
+
+                    active(2):   This PVC is reported as active, or
+                                   operational, by the user device.
+
+                      inactive(3): This PVC is reported as inactive,
+                                   or non-operational, by the user
+                                   device.
+
+                      none(4):     This interface is only using the
+                                   network-side in-channel signaling
+                                   procedures, so this object does
+                                   not apply."
+            ::= { frPVCEndptEntry 12 }
+
+        frPVCEndptInFrames OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) for this PVC end-point. This includes
+                    any frames discarded by the network due to
+                    submitting more than Bc + Be data or due to any
+                    network congestion recovery procedures."
+            ::= { frPVCEndptEntry 13 }
+
+        frPVCEndptOutFrames OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames sent by the network (egress)
+                    regardless of whether they are Bc or Be frames for
+                    this PVC end-point."
+            ::= { frPVCEndptEntry 14 }
+
+        frPVCEndptInDEFrames OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) with the DE bit set to (1) for this PVC
+                    end-point."
+            ::= { frPVCEndptEntry 15 }
+
+        frPVCEndptInExcessFrames OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) for this PVC end-point which were
+                    treated as excess traffic.  Frames which are sent
+                    to the network with DE set to zero are treated as
+                    excess when more than Bc bits are submitted to the
+                    network during the Committed Information Rate
+                    Measurement Interval (Tc).  Excess traffic may or
+                    may not be discarded at the ingress if more than
+                    Bc + Be bits are submitted to the network during
+                    Tc.  Traffic discarded at the ingress is not
+                    recorded in frPVCEndptInExcessFrames.  Frames
+                    which are sent to the network with DE set to one
+                    are also treated as excess traffic."
+            ::= { frPVCEndptEntry 16 }
+
+        frPVCEndptOutExcessFrames OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames sent by the network (egress)
+                    for this PVC end-point which were treated as
+                    excess traffic.  (The DE bit may be set to one.)"
+            ::= { frPVCEndptEntry 17 }
+
+        frPVCEndptInDiscards OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) that were discarded due to traffic
+                    enforcement for this PVC end-point.  Congestion
+                    discards are not counted in this object."
+            ::= { frPVCEndptEntry 18 }
+
+        frPVCEndptInOctets OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Octets"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of octets received by the network
+                    (ingress) for this PVC end-point.  This counter
+                    should only count octets from the beginning of the
+                    frame relay header field to the end of user data.
+                    If the network supporting frame relay can not
+                    count octets, then this count should be an
+                    approximation."
+            ::= { frPVCEndptEntry 19 }
+
+        frPVCEndptOutOctets OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Octets"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of octets sent by the network (egress)
+                    for this PVC end-point.  This counter should only
+                    count octets from the beginning of the frame relay
+                    header field to the end of user data.  If the
+                    network supporting frame relay can not count
+                    octets, then this count should be an
+                    approximation."
+            ::= { frPVCEndptEntry 20 }
+
+        frPVCEndptInDiscardsDESet OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) that were discarded with the DE bit set
+                    due to traffic enforcement for this PVC end-point.
+                    Congestion discards are not counted in this
+                    object."
+            ::= { frPVCEndptEntry 21 }
+
+        frPVCEndptInFramesFECNSet OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) that have the FECN bit set for this PVC
+                    end-point."
+            ::= { frPVCEndptEntry 22 }
+
+        frPVCEndptOutFramesFECNSet OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames sent by the network (egress)
+                    that have the FECN bit set for this PVC end-
+                    point."
+            ::= { frPVCEndptEntry 23 }
+
+        frPVCEndptInFramesBECNSet OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) that have the BECN bit set for this PVC
+                    end-point."
+            ::= { frPVCEndptEntry 24 }
+
+        frPVCEndptOutFramesBECNSet OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames sent by the network (egress)
+                    that have the BECN bit set for this PVC end-
+                    point."
+            ::= { frPVCEndptEntry 25 }
+
+        frPVCEndptInCongDiscards OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames received by the network
+                    (ingress) that were discarded due to input buffer
+                    congestion, rather than traffic enforcement, for
+                    this PVC end-point."
+            ::= { frPVCEndptEntry 26 }
+
+        frPVCEndptInDECongDiscards OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames counted by
+                    frPVCEndptInCongDiscards with the DE bit set to
+                    (1)."
+            ::= { frPVCEndptEntry 27 }
+
+        frPVCEndptOutCongDiscards OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames sent by the network (egress)
+                    that were discarded due to output buffer
+                    congestion for this PVC end-point."
+            ::= { frPVCEndptEntry 28 }
+
+        frPVCEndptOutDECongDiscards OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames counted by
+                    frPVCEndptOutCongDiscards with the DE bit set to
+                    (1)."
+            ::= { frPVCEndptEntry 29 }
+
+        frPVCEndptOutDEFrames OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Frames"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The number of frames sent by the network (egress)
+                    with the DE bit set to (1) for this PVC end-
+                    point."
+            ::= { frPVCEndptEntry 30 }
+
+        frPVCEndptAtmIwfConnIndex OBJECT-TYPE
+            SYNTAX      Integer32  (0..2147483647)
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "This object contains the index value of the
+                    FR/ATM cross-connect table entry used to link the
+                    frame relay PVC with an ATM PVC.
+
+                    Each row of the frPVCEndptTable that is not
+                    cross-connected with an ATM PVC must return the
+                    value zero when this object is read.
+
+                    The value of this object is initialized by the
+                    agent after the associated entries in the
+                    frAtmIwfConnectionTable have been created.
+
+                    The value of this object is reset to zero
+                    following destruction of the associated entry in
+                    the frAtmIwfConnectionTable"
+            ::= { frPVCEndptEntry 31 }
+
+        --
+        -- Frame Relay PVC Connections
+        --
+
+        frPVCConnectIndexValue OBJECT-TYPE
+            SYNTAX      INTEGER (0..2147483647)
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "This object returns a hint to be used for
+                    frPVCConnectIndex when creating entries in the
+                    frPVCConnectTable.
+
+                    The value 0 indicates that no unassigned entries
+                    are available.
+
+                    To obtain the frPVCConnectIndex value for a new
+                    entry, the manager issues a management protocol
+                    retrieval operation to obtain the current value of
+                    this object.  After each retrieval, the agent must
+
+                    modify the value to the next unassigned index to
+                    prevent assignment of the same value to multiple
+                    management systems.
+
+                    A management system should repeat the read to
+                    obtain a new value should an attempt to create the
+                    new row using the previously returned hint fail."
+            ::= { frnetservObjects 4 }
+
+        frPVCConnectTable OBJECT-TYPE
+            SYNTAX      SEQUENCE OF FrPVCConnectEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The Frame Relay PVC Connect Table is used to
+                    model the bi-directional PVC segment flows
+                    including:  point-to-point PVCs, point-to-
+                    multipoint PVCs, and multipoint-to-multipoint
+                    PVCs.
+
+                    This table has read-create access and is used to
+                    associate PVC end-points together as belonging to
+                    one connection.  The frPVCConnectIndex is used to
+                    associate all the bi-directional flows.  Not all
+                    implementations will support the capability of
+                    creating/modifying/deleting PVCs using SNMP as a
+                    feature of frame relay CNM service.
+
+                    Once the entries in the frPVCEndptTable are
+                    created, the following step are used to associate
+                    the PVC end-points as belonging to one PVC
+                    connection:
+
+                    1)  Obtain a unique frPVCConnectIndex
+                        using the frPVCConnectIndexValue object.
+
+                    2)  Connect the PVC segment endpoints together
+                        with the applicable frPVCConnectIndex value
+                        obtained via  frPVCConnectIndexValue.  The
+                        entries in this table are created by using
+                        the frPVCConnectRowStatus object.
+
+                    3)  The agent will provide the value of the
+                        corresponding instances of
+                        frPVCEndptConnectIdentifier with the
+                        frPVCConnectIndex value.
+
+                    4)  Set frPVCConnectAdminStatus to `active(1)' in
+
+                        all rows for this PVC segment to turn the
+                        PVC on.
+
+                    For example, the Frame Relay PVC Connection Group
+                    models a bi-directional, point-to-point PVC
+                    segment as one entry in this table.
+
+                    Frame Relay                           Frame Relay
+                     Network                                 Network
+                     Low Port                               High Port
+                             __________________________________
+                            |                                  |
+                       _____| >> from low to high PVC flow  >> |_____
+                            | << from high to low PVC flow  << |
+                            |__________________________________|
+
+                    The terms low and high are chosen to represent
+                    numerical ordering of a PVC segment's endpoints
+                    for representation in this table.  That is, the
+                    endpoint with the lower value of ifIndex is termed
+                    'low', while the opposite endpoint of the segment
+                    is termed 'high'.  This terminology is to provide
+                    directional information; for example the
+                    frPVCConnectL2hOperStatus and
+                    frPVCConnectH2lOperStatus as illustrated above.
+
+                    If the Frame Relay Connection table is used to
+                    model a unidirectional PVC, then one direction
+                    (either from low to high or from high to low) has
+                     its Operational Status equal to down.
+
+                     A PVC segment is a portion of a PVC that traverses
+                    one Frame Relay Network, and a PVC segment is
+                    identified by its two end-points (UNI/NNI logical
+                    port index value and DLCI index value) through one
+                    Frame Relay Network."
+            ::= { frnetservObjects 5 }
+
+        frPVCConnectEntry OBJECT-TYPE
+            SYNTAX      FrPVCConnectEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "An entry in the Frame Relay PVC Connect table.
+                    This entry is used to model a PVC segment in two
+                    directions."
+            INDEX { frPVCConnectIndex,
+                    frPVCConnectLowIfIndex,
+                    frPVCConnectLowDLCIIndex,
+                    frPVCConnectHighIfIndex,
+                    frPVCConnectHighDLCIIndex }
+            ::= { frPVCConnectTable 1 }
+
+        FrPVCConnectEntry ::=
+            SEQUENCE {
+                frPVCConnectIndex            Integer32,
+                frPVCConnectLowIfIndex       InterfaceIndex,
+                frPVCConnectLowDLCIIndex     Integer32,
+                frPVCConnectHighIfIndex      InterfaceIndex,
+                frPVCConnectHighDLCIIndex    Integer32,
+                frPVCConnectAdminStatus      INTEGER,
+                frPVCConnectL2hOperStatus    INTEGER,
+                frPVCConnectH2lOperStatus    INTEGER,
+                frPVCConnectL2hLastChange    TimeStamp,
+                frPVCConnectH2lLastChange    TimeStamp,
+                frPVCConnectRowStatus        RowStatus,
+                frPVCConnectUserName         SnmpAdminString,
+                frPVCConnectProviderName     SnmpAdminString
+        }
+
+          frPVCConnectIndex OBJECT-TYPE
+              SYNTAX      Integer32 (0..2147483647)
+              MAX-ACCESS  not-accessible
+              STATUS      current
+              DESCRIPTION
+                      "The value of this object is equal to the
+                      frPVCConnectIndexValue obtained to uniquely
+                      identify this PVC segment connection."
+              ::= { frPVCConnectEntry 1 }
+
+        frPVCConnectLowIfIndex OBJECT-TYPE
+            SYNTAX      InterfaceIndex
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to IF-MIB
+                    ifIndex value of the UNI/NNI logical port for this
+                    PVC segment.  The term low implies that this PVC
+                    segment end-point has the numerically lower
+                    ifIndex value than the connected/associated PVC
+                    segment end-point.
+
+                    RFC 1604 permitted a zero value for this object to
+                    identify termination at a non-frame relay
+                    interface.  However, this cross-connect table is
+                    limited to frame relay connections.  See the frame
+
+                    relay/ATM IWF MIB [28] for the cross-connect table
+                    used for those types of connections."
+            ::= { frPVCConnectEntry 2 }
+
+        frPVCConnectLowDLCIIndex OBJECT-TYPE
+            SYNTAX      Integer32 (16..4194303)
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the DLCI
+                    value for this end-point of the PVC segment."
+            REFERENCE   "Q.922 [25]"
+            ::= { frPVCConnectEntry 3 }
+
+        frPVCConnectHighIfIndex OBJECT-TYPE
+            SYNTAX      InterfaceIndex
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to IF-MIB
+                    ifIndex value for the UNI/NNI logical port for
+                    this PVC segment.  The term high implies that this
+                    PVC segment end-point has the numerically higher
+                    ifIndex value than the connected/associated PVC
+                    segment end-point."
+            ::= { frPVCConnectEntry 4 }
+
+        frPVCConnectHighDLCIIndex OBJECT-TYPE
+            SYNTAX      Integer32 (16..4194303)
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the egress
+                    DLCI value for this end-point of the PVC segment."
+            REFERENCE   "Q.922 [25]"
+            ::= { frPVCConnectEntry 5 }
+
+        frPVCConnectAdminStatus OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        active(1),
+                        inactive(2),
+                        testing(3)
+                        }
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the desired
+                    administrative status of this bi-directional PVC
+
+                    segment.  The active(1) state means the PVC
+                    segment is currently operational; the inactive(2)
+                    state means the PVC segment is currently not
+                    operational; the testing(3) state means the PVC
+                    segment is currently undergoing a test.  This
+                    state is set by an administrative entity.  This
+                    value affects the PVC status indicated across the
+                    ingress NNI/UNI of both end-points of the bi-
+                    directional PVC segment.  When a PVC segment
+                    connection is created using this table, this
+                    object is initially set to `inactive(2)'.  After
+                    the frPVCConnectRowStatus object is set to
+                    `active(1)' (and the corresponding/associated
+                    entries in the frPVCEndptTable have their
+                    frPVCEndptRowStatus object set to `active(1)'),
+                    the frPVCConnectAdminStatus object may be set to
+                    `active(1)' to turn on the PVC segment
+                    connection."
+            ::= { frPVCConnectEntry 6 }
+
+        frPVCConnectL2hOperStatus OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        active(1),
+                        inactive(2),
+                        testing(3),
+                        unknown(4)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the current
+                    operational status of the PVC segment connection
+                    in one direction; (i.e., in the low to high
+                    direction). This value affects the PVC status
+                    indicated across the ingress NNI/UNI (low side) of
+                    the PVC segment.
+
+                    The values mean:
+
+                    active(1)   - PVC is currently operational
+
+                    inactive(2) - PVC is currently not operational.
+                                  This may be because of an underlying
+                                  LMI or DS1 failure.
+
+                    testing(3)  - PVC is currently undergoing a test.
+                                  This may be because of an underlying
+                                  frLport or DS1 undergoing a test.
+
+                    unknown(4)  - the status of the PVC currently can
+                                  not be determined."
+            ::= { frPVCConnectEntry 7 }
+
+        frPVCConnectH2lOperStatus OBJECT-TYPE
+            SYNTAX      INTEGER {
+                        active(1),
+                        inactive(2),
+                        testing(3),
+                        unknown(4)
+                        }
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object identifies the current
+                    operational status of the PVC segment connection
+                    in one direction; (i.e., in the high to low
+                    direction)..  This value affects the PVC status
+                    indicated across the ingress NNI/UNI (high side)
+                    of the PVC segment.
+
+                    The values mean:
+
+                    active(1)   - PVC is currently operational
+
+                    inactive(2) - PVC is currently not operational.
+                                  This may be because of an underlying
+                                  LMI or DS1 failure.
+
+                    testing(3)  - PVC is currently undergoing a test.
+                                  This may be because of an underlying
+                                  frLport or DS1 undergoing a test.
+
+                    unknown(4)  - the status of the PVC currently can
+                                  not be determined."
+            ::= { frPVCConnectEntry 8 }
+
+        frPVCConnectL2hLastChange OBJECT-TYPE
+            SYNTAX      TimeStamp
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of the Interface MIB's sysUpTime object
+                    at the time this PVC segment entered its current
+                    operational state in the low to high direction.
+                    If the current state was entered prior to the last
+                    re-initialization of the FRS agent, then this
+                    object contains a zero value."
+            ::= { frPVCConnectEntry 9 }
+
+        frPVCConnectH2lLastChange OBJECT-TYPE
+            SYNTAX      TimeStamp
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of the Interface MIB's sysUpTime object
+                    at the time this PVC segment entered its current
+                    operational state in the high to low direction.
+                    If the current state was entered prior to the last
+                    re-initialization of the FRS agent, then this
+                    object contains a zero value."
+            ::= { frPVCConnectEntry 10 }
+
+        frPVCConnectRowStatus OBJECT-TYPE
+            SYNTAX      RowStatus
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "The status of this entry in the
+                    frPVCConnectTable.  This variable is used to
+                    create new connections for the PVC end-points and
+                    to change existing connections of the PVC end-
+                    points.  This object must be initially set to
+                    `createAndWait(5)'. In this state, the agent
+                    checks the parameters in the associated entries in
+                    the frPVCEndptTable to verify that the PVC end-
+                    points can be connected (i.e., the In parameters
+                    for one PVC end-point are equal to the Out
+                    parameters for the other PVC end-point).  This
+                    object can not be set to `active(1)' unless the
+                    following columnar object exists in this row:
+                    frPVCConnectAdminStatus.  The agent also supplies
+                    the associated value of frPVCConnectIndex for the
+                    frPVCEndptConnectIdentifier instances.  To turn on
+                    a PVC segment connection, the
+                    frPVCConnectAdminStatus is set to `active(1)'."
+            ::= { frPVCConnectEntry 11 }
+
+        frPVCConnectUserName OBJECT-TYPE
+            SYNTAX      SnmpAdminString
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "This is a service user assigned textual
+                    representation of a PVC."
+            ::= { frPVCConnectEntry 12 }
+
+        frPVCConnectProviderName OBJECT-TYPE
+            SYNTAX      SnmpAdminString
+            MAX-ACCESS  read-create
+            STATUS      current
+            DESCRIPTION
+                    "This is a system supplied textual representation
+                    of PVC.  It is assigned by the service provider."
+            ::= { frPVCConnectEntry 13 }
+
+        --
+        -- The Frame Relay Accounting
+        --
+
+        frAccountPVCTable OBJECT-TYPE
+            SYNTAX      SEQUENCE OF FrAccountPVCEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The Frame Relay Accounting PVC table.  This table
+                    is used to perform accounting on a PVC segment
+                    end-point basis."
+            ::= { frnetservObjects 6 }
+
+        frAccountPVCEntry OBJECT-TYPE
+            SYNTAX      FrAccountPVCEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "An entry in the Frame Relay Accounting PVC
+                    table."
+            INDEX   {   ifIndex,
+                        frAccountPVCDLCIIndex }
+            ::= { frAccountPVCTable 1 }
+
+        FrAccountPVCEntry ::=
+            SEQUENCE {
+                frAccountPVCDLCIIndex            Integer32,
+                frAccountPVCSegmentSize          Integer32,
+                frAccountPVCInSegments           Counter32,
+                frAccountPVCOutSegments          Counter32
+            }
+
+        frAccountPVCDLCIIndex OBJECT-TYPE
+            SYNTAX      Integer32 (16..4194303)
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the DLCI
+
+                    value for this PVC segment end-point."
+            REFERENCE   "Q.922 [25]"
+            ::= { frAccountPVCEntry 1 }
+
+        frAccountPVCSegmentSize OBJECT-TYPE
+            SYNTAX      Integer32
+            UNITS       "Octets"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the Segment
+                    Size for this PVC segment end-point."
+            ::= { frAccountPVCEntry 2 }
+
+        frAccountPVCInSegments OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Segments"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the number
+                    of segments received by this PVC segment end-
+                    point."
+            ::= { frAccountPVCEntry 3 }
+
+        frAccountPVCOutSegments OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Segments"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the number
+                    of segments sent by this PVC segment end-point."
+            ::= { frAccountPVCEntry 4 }
+
+        --
+        -- Accounting on a Frame Relay Logical Port
+        --
+
+        frAccountLportTable OBJECT-TYPE
+            SYNTAX      SEQUENCE OF FrAccountLportEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "The Frame Relay Accounting Logical Port table.
+                    This table is used to perform accounting on a
+                    UNI/NNI Logical Port basis."
+            ::= { frnetservObjects 7 }
+
+        frAccountLportEntry OBJECT-TYPE
+            SYNTAX      FrAccountLportEntry
+            MAX-ACCESS  not-accessible
+            STATUS      current
+            DESCRIPTION
+                    "An entry in the Frame Relay Accounting Logical
+                    Port table."
+            INDEX   {   ifIndex }
+            ::= { frAccountLportTable 1 }
+
+        FrAccountLportEntry ::=
+            SEQUENCE {
+                frAccountLportSegmentSize
+                    Integer32,
+                frAccountLportInSegments
+                    Counter32,
+                frAccountLportOutSegments
+                    Counter32
+            }
+
+        frAccountLportSegmentSize OBJECT-TYPE
+            SYNTAX      Integer32
+            UNITS       "Octets"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the Segment
+                    Size for this UNI/NNI logical port."
+            ::= { frAccountLportEntry 1 }
+
+        frAccountLportInSegments OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Segments"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the number
+                    of segments received by this UNI/NNI logical
+                    port."
+            ::= { frAccountLportEntry 2 }
+
+        frAccountLportOutSegments OBJECT-TYPE
+            SYNTAX      Counter32
+            UNITS       "Segments"
+            MAX-ACCESS  read-only
+            STATUS      current
+            DESCRIPTION
+                    "The value of this object is equal to the number
+
+                    of segments sent by this UNI/NNI logical port."
+            ::= { frAccountLportEntry 3 }
+
+          --
+          -- Frame Relay Network Service Notifications
+          --
+
+        frPVCConnectStatusChange  NOTIFICATION-TYPE
+            OBJECTS { frPVCConnectIndex,
+                      frPVCConnectLowIfIndex,
+                      frPVCConnectLowDLCIIndex,
+                      frPVCConnectHighIfIndex,
+                      frPVCConnectHighDLCIIndex,
+                      frPVCConnectL2hOperStatus,
+                      frPVCConnectH2lOperStatus,
+                      frPVCEndptRcvdSigStatus }
+            STATUS  deprecated
+            DESCRIPTION
+                    "Refer to the description of the
+                    frPVCConnectStatusNotif notification that has
+                    replaced this notification.  The notification is
+                    deprecated due to the incorrect inclusion of index
+                    values and to take advantage of the trap prefix
+                    for automatic conversion from SMIv2 to SMIv1 by
+                    making the one but last sub-ID a zero (i.e. the
+                    so-called trap prefix)."
+            ::= { frnetservTraps 1 }
+
+        frPVCConnectStatusNotif  NOTIFICATION-TYPE
+            OBJECTS { frPVCConnectL2hOperStatus,
+                      frPVCConnectH2lOperStatus,
+                      frPVCEndptRcvdSigStatus }
+            STATUS  current
+            DESCRIPTION
+                    "This notification indicates that the indicated
+                    PVC has changed state.
+
+                    This notification is not sent if an FR-UNI changes
+                    state; a linkDown or linkUp notification should be
+                    sent instead.  The first instance of
+                    frPVCEndptRcvdSigStatus is for the endpoint with
+                    LowIfIndex, LowDLCIIndex.  The second instance of
+                    frPVCEndptRcvdSigStatus is for the endpoint with
+                    HighIfIndex, HighDLCIIndex"
+            ::= { frnetservTrapsPrefix 2 }
+
+        -- Conformance Information
+
+        frnetservConformance  OBJECT IDENTIFIER
+            ::= { frnetservMIB 3 }
+
+        frnetservGroups       OBJECT IDENTIFIER
+            ::= { frnetservConformance 1 }
+        frnetservCompliances  OBJECT IDENTIFIER
+            ::= { frnetservConformance 2 }
+
+        --
+        --  Service (Read-only) Modules
+        --
+        frnetservCompliance2 MODULE-COMPLIANCE
+            STATUS      current
+            DESCRIPTION
+                    "The compliance statement for SNMP entities which
+                    have Frame Relay Network Service Interfaces.
+
+                    The distinction between 'service' and 'switch' is
+                    that a 'switch' is configured via this MIB.
+                    Hence, the various read/write objects have write
+                    capability.  A 'service' represents a passive
+                    monitor-only customer network management
+                    interface.  The various read/write objects are
+                    restricted to read-only capability."
+            MODULE -- this module
+                MANDATORY-GROUPS { frnetservLportGroup2,
+                                   frnetservMgtVCSigGroup,
+                                   frnetservPVCEndptGroup,
+                                   frnetservPVCEndptGroup2,
+                                   frnetservPVCConnectGroup,
+                                   frnetservPVCConnectNamesGroup,
+                                   frnetservPVCNotifGroup2 }
+
+                GROUP       frnetservAccountPVCGroup
+                DESCRIPTION
+                    "This group is optional for frame relay
+                    interfaces.  It is mandatory if and only if
+                    accounting is performed on a PVC basis this frame
+                    relay interface."
+                GROUP       frnetservAccountLportGroup
+                DESCRIPTION
+                    "This group is optional for frame relay
+                    interfaces.  It is mandatory if and only if
+                    accounting is performed on a logical port basis
+                    this frame relay interface."
+
+                OBJECT      frPVCEndptInMaxFrameSize
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptInBc
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptInBe
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptInCIR
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptOutMaxFrameSize
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptOutBc
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptOutBe
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptOutCIR
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCEndptRowStatus
+             -- subset of RowStatus
+                SYNTAX      INTEGER { active(1) }
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required, and only one of the
+                    six enumerated values for the RowStatus textual
+                    convention need be supported, specifically:
+                    active(1)."
+
+                OBJECT      frPVCConnectAdminStatus
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                     "Write access is not required."
+
+                OBJECT      frPVCConnectRowStatus
+             -- subset of RowStatus
+                SYNTAX      INTEGER { active(1) }
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required, and only one of the
+                    six enumerated values for the RowStatus textual
+                    convention need be supported, specifically:
+                    active(1)."
+
+                OBJECT      frLportFragControl
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frLportFragSize
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCConnectUserName
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+
+                OBJECT      frPVCConnectProviderName
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                      "Write access is not required."
+              ::= { frnetservCompliances 2 }
+
+        --
+        -- Switch (Configuration) Compliance
+        --
+        frnetSwitchCompliance MODULE-COMPLIANCE
+            STATUS      current
+            DESCRIPTION
+                    "The compliance statement for SNMP entities which
+                    have Frame Relay Network Switch objects.
+
+                    The distinction between 'service' and 'switch' is
+                    that a 'switch' is configured via this MIB.
+
+                    Hence, the various read/write objects have write
+                    capability.  A 'service' represents a passive
+                    monitor-only customer network management
+                    interface.  The various read/write objects are
+                    restricted to read-only capability."
+            MODULE -- this module
+                MANDATORY-GROUPS { frnetservLportGroup2,
+                                   frnetservLportAdminGroup,
+                                   frnetservMgtVCSigGroup,
+                                   frnetservMgtVCSigAdminGroup,
+                                   frnetservPVCEndptGroup,
+                                   frnetservPVCEndptGroup2,
+                                   frnetservPVCConnectGroup,
+                                   frnetservPVCConnectNamesGroup,
+                                   frnetservPVCNotifGroup2 }
+
+                GROUP       frnetservAccountPVCGroup
+                DESCRIPTION
+                    "This group is optional for frame relay
+                    interfaces.  It is mandatory if and only if
+                    accounting is performed on a PVC basis this frame
+                    relay interface."
+                GROUP       frnetservAccountLportGroup
+                DESCRIPTION
+                    "This group is optional for frame relay
+                    interfaces.  It is mandatory if and only if
+                    accounting is performed on a logical port basis
+                    this frame relay interface."
+              ::= { frnetservCompliances 3 }
+
+         --
+         -- Historical RFC 1604 Compliance Modules
+         --
+
+        frnetservCompliance MODULE-COMPLIANCE
+            STATUS  deprecated
+            DESCRIPTION
+                    "The compliance statement for SNMP entities which
+                    have Frame Relay Network Service Interfaces.
+
+                    This compliance statement has been deprecated in
+                    favor of frnetservCompliance2.  The new compliance
+                    module expands the mandatory groups to include
+                    notification and other new objects."
+
+            MODULE -- this module
+                MANDATORY-GROUPS { frnetservLportGroup,
+                                   frnetservMgtVCSigGroup,
+                                   frnetservPVCEndptGroup,
+                                   frnetservPVCConnectGroup }
+
+                GROUP       frnetservAccountPVCGroup
+                DESCRIPTION
+                    "This group is optional for Frame Relay
+                    interfaces.  It is mandatory if and only if
+                    accounting is performed on a PVC basis this Frame
+                    Relay interface."
+
+                GROUP       frnetservAccountLportGroup
+                DESCRIPTION
+                    "This group is optional for Frame Relay
+                    interfaces.  It is mandatory if and only if
+                    accounting is performed on a logical port basis
+                    this Frame Relay interface."
+
+                OBJECT      frPVCEndptInMaxFrameSize
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptInBc
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+                OBJECT      frPVCEndptInBe
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptInCIR
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptOutMaxFrameSize
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptOutBc
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptOutBe
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptOutCIR
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCEndptRowStatus
+             -- subset of RowStatus
+                SYNTAX      INTEGER { active(1) }
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required, and only one of the
+                    six enumerated values for the RowStatus textual
+                    convention need be supported, specifically:
+                    active(1)."
+
+                OBJECT      frPVCConnectAdminStatus
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required."
+
+                OBJECT      frPVCConnectRowStatus
+             -- subset of RowStatus
+                SYNTAX      INTEGER { active(1) }
+                MIN-ACCESS  read-only
+                DESCRIPTION
+                    "Write access is not required, and only one of the
+                    six enumerated values for the RowStatus textual
+                    convention need be supported, specifically:
+                    active(1)."
+            ::= { frnetservCompliances 1 }
+
+         --
+         -- Frame Relay Service MIB Object Groups
+         --
+         frnetservLportGroup  OBJECT-GROUP
+             OBJECTS { frLportNumPlan, frLportContact, frLportLocation,
+                       frLportType,
+                       frLportAddrDLCILen, frLportVCSigProtocol,
+                       frLportVCSigPointer }
+             STATUS  deprecated
+             DESCRIPTION
+                     "A collection of objects providing information
+                     applicable to a Frame Relay Logical Port.  This
+                     group has been deprecated to eliminate reference
+
+                     to the object frLportVCSigPointer.
+
+                     Use the new group frnetservLportGroup2 as a
+                     replacement for this group."
+             ::= { frnetservGroups 1 }
+
+        frnetservMgtVCSigGroup  OBJECT-GROUP
+            OBJECTS { frMgtVCSigProced,
+                      frMgtVCSigUserN391,
+                      frMgtVCSigUserN392,
+                      frMgtVCSigUserN393,
+                      frMgtVCSigUserT391,
+                      frMgtVCSigNetN392,
+                      frMgtVCSigNetN393,
+                      frMgtVCSigNetT392,
+                      frMgtVCSigNetnN4,
+                      frMgtVCSigNetnT3,
+                      frMgtVCSigUserLinkRelErrors,
+                      frMgtVCSigUserProtErrors,
+                      frMgtVCSigUserChanInactive,
+                      frMgtVCSigNetLinkRelErrors,
+                      frMgtVCSigNetProtErrors,
+                      frMgtVCSigNetChanInactive }
+            STATUS  current
+            DESCRIPTION
+                    "A collection of objects providing information
+                    applicable to the Local In-Channel Signaling
+                    Procedures used for a UNI/NNI logical port."
+            ::= { frnetservGroups 2 }
+
+        frnetservPVCEndptGroup  OBJECT-GROUP
+            OBJECTS { frPVCConnectIndexValue,
+                      frPVCEndptInMaxFrameSize,
+                      frPVCEndptInBc,
+                      frPVCEndptInBe,
+                      frPVCEndptInCIR,
+                      frPVCEndptOutMaxFrameSize,
+                      frPVCEndptOutBc,
+                      frPVCEndptOutBe,
+                      frPVCEndptOutCIR,
+                      frPVCEndptConnectIdentifier,
+                      frPVCEndptRowStatus,
+                      frPVCEndptRcvdSigStatus,
+                      frPVCEndptInFrames,
+                      frPVCEndptOutFrames,
+                      frPVCEndptInDEFrames,
+                      frPVCEndptInExcessFrames,
+                      frPVCEndptOutExcessFrames,
+                      frPVCEndptInDiscards,
+                      frPVCEndptInOctets,
+                      frPVCEndptOutOctets }
+            STATUS  current
+            DESCRIPTION
+                    "A collection of objects providing information
+                    applicable to a Frame Relay PVC end-point."
+            ::= { frnetservGroups 3 }
+
+        frnetservPVCConnectGroup  OBJECT-GROUP
+            OBJECTS { frPVCConnectAdminStatus,
+                      frPVCConnectL2hOperStatus,
+                      frPVCConnectH2lOperStatus,
+                      frPVCConnectL2hLastChange,
+                      frPVCConnectH2lLastChange,
+                      frPVCConnectRowStatus }
+            STATUS  current
+            DESCRIPTION
+                    "A collection of objects providing information
+                    applicable to a Frame Relay PVC connection."
+            ::= { frnetservGroups 4 }
+
+        frnetservAccountPVCGroup  OBJECT-GROUP
+            OBJECTS { frAccountPVCSegmentSize,
+                      frAccountPVCInSegments,
+                      frAccountPVCOutSegments }
+            STATUS  current
+            DESCRIPTION
+                    "A collection of objects providing accounting
+                    information application to a Frame Relay PVC end-
+                    point."
+            ::= { frnetservGroups 5 }
+
+        frnetservAccountLportGroup  OBJECT-GROUP
+            OBJECTS { frAccountLportSegmentSize,
+                      frAccountLportInSegments,
+                      frAccountLportOutSegments }
+            STATUS  current
+            DESCRIPTION
+                    "A collection of objects providing accounting
+                    information application to a Frame Relay logical
+                    port."
+            ::= { frnetservGroups 6 }
+
+        frnetservLportGroup2  OBJECT-GROUP
+            OBJECTS { frLportNumPlan,
+                      frLportContact,
+                      frLportLocation,
+                      frLportType,
+                      frLportAddrDLCILen,
+                      frLportVCSigProtocol,
+                      frLportFragControl,
+                      frLportFragSize }
+            STATUS  current
+            DESCRIPTION
+                    "A collection of objects providing information
+                    applicable to a Frame Relay Logical Port.
+
+                    This new version of the Logical Port Group
+                    eliminates the frLportVCSigPointer and adds
+                    support for fragmentation."
+            ::= { frnetservGroups 7 }
+
+        frnetservPVCEndptGroup2  OBJECT-GROUP
+              OBJECTS { frPVCEndptInDiscardsDESet,
+                        frPVCEndptInFramesFECNSet,
+                        frPVCEndptOutFramesFECNSet,
+                        frPVCEndptInFramesBECNSet,
+                        frPVCEndptOutFramesBECNSet,
+                        frPVCEndptInCongDiscards,
+                        frPVCEndptInDECongDiscards,
+                        frPVCEndptOutCongDiscards,
+                        frPVCEndptOutDECongDiscards,
+                        frPVCEndptOutDEFrames,
+                        frPVCEndptAtmIwfConnIndex }
+              STATUS  current
+              DESCRIPTION
+                    "Additions to the PVC end-point group.  These
+                    additions provide new frame counters to track
+                    frame loss.  In addition, the new FR/ATM IWF MIB
+                    cross-connect index is included."
+              ::= { frnetservGroups 8 }
+
+        frnetservPVCConnectNamesGroup  OBJECT-GROUP
+              OBJECTS { frPVCConnectUserName,
+                        frPVCConnectProviderName }
+              STATUS  current
+              DESCRIPTION
+                    "Additions to the PVC Connect Group."
+              ::= { frnetservGroups 9 }
+
+        frnetservLportAdminGroup OBJECT-GROUP
+              OBJECTS { frLportDLCIIndexValue,
+                        frLportTypeAdmin,
+                        frLportVCSigProtocolAdmin }
+              STATUS  current
+              DESCRIPTION
+                    "Administrative (R/W) objects for creating a
+                    switch logical port."
+              ::= { frnetservGroups 10 }
+
+        frnetservMgtVCSigAdminGroup OBJECT-GROUP
+              OBJECTS { frMgtVCSigProcedAdmin,
+                        frMgtVCSigUserN391Admin,
+                        frMgtVCSigUserN392Admin,
+                        frMgtVCSigUserN393Admin,
+                        frMgtVCSigUserT391Admin,
+                        frMgtVCSigNetN392Admin,
+                        frMgtVCSigNetN393Admin,
+                        frMgtVCSigNetT392Admin,
+                        frMgtVCSigNetnT3Admin }
+              STATUS  current
+              DESCRIPTION
+                    "A collection of objects providing information
+                    applicable to the Local In-Channel Signaling
+                    Procedures used for a UNI/NNI logical port."
+              ::= { frnetservGroups 11 }
+
+        frnetservPVCNotifGroup NOTIFICATION-GROUP
+              NOTIFICATIONS { frPVCConnectStatusChange }
+              STATUS    deprecated
+              DESCRIPTION
+                    "Deprecated notification group.  The
+                    frPVCConnectStatusChange notification was flawed
+                    because it included redundant indexes and was not
+                    properly encoded for SMIv1 conversion."
+            ::= { frnetservGroups 12 }
+
+        frnetservPVCNotifGroup2 NOTIFICATION-GROUP
+              NOTIFICATIONS { frPVCConnectStatusNotif }
+              STATUS    current
+              DESCRIPTION
+                    "A collection of notifications that apply to frame
+                    relay PVC Connections "
+            ::= { frnetservGroups 13 }
+
+        END
diff --git a/snmp_builder/mibs/FRSLD-MIB.mib b/snmp_builder/mibs/FRSLD-MIB.mib
new file mode 100644
index 0000000..9a8dfc9
--- /dev/null
+++ b/snmp_builder/mibs/FRSLD-MIB.mib
@@ -0,0 +1,1768 @@
+FRSLD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Counter32, Gauge32, Integer32,
+    Counter64, TimeTicks, mib-2             FROM SNMPv2-SMI
+    CounterBasedGauge64                     FROM HCNUM-TC
+    TEXTUAL-CONVENTION, RowStatus,
+    TimeStamp                               FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP         FROM SNMPv2-CONF
+    ifIndex                                 FROM IF-MIB
+    DLCI                                    FROM FRAME-RELAY-DTE-MIB;
+
+    frsldMIB MODULE-IDENTITY
+        LAST-UPDATED "200201030000Z" -- January 3, 2002
+        ORGANIZATION "IETF Frame Relay Service MIB Working Group"
+        CONTACT-INFO
+          "IETF Frame Relay Service MIB (frnetmib) Working Group
+
+           WG Charter:    http://www.ietf.org/html.charters/
+                                 frnetmib-charter.html
+           WG-email:      frnetmib@sunroof.eng.sun.com
+           Subscribe:     frnetmib-request@sunroof.eng.sun.com
+           Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
+
+           Chair:      Andy Malis
+                       Vivace Networks
+           Email:      Andy.Malis@vivacenetworks.com
+
+           WG editor:  Robert Steinberger
+                       Paradyne Networks and
+                       Fujitsu Network Communications
+           Email:      robert.steinberger@fnc.fujitsu.com
+
+           Co-author:  Orly Nicklass
+                       RAD Data Communications Ltd.
+           EMail:      Orly_n@rad.co.il"
+        DESCRIPTION
+            "The MIB module to describe generic objects for
+             FRF.13 Frame Relay Service Level Definitions."
+        REVISION "200201030000Z" -- January 3, 2002
+        DESCRIPTION
+            "Initial version, published as RFC 3202"
+        ::= { mib-2 95 }
+
+    --
+    -- Textual Conventions
+    --
+    FrsldTxRP ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+            "The reference point a PVC uses for calculation
+             of transmitter related statistics.
+
+             The valid values for this type of object are as follows:
+               - srcLocalRP(1) for the local source
+               - ingTxLocalRP(2) for the local ingress queue input
+               - tpTxLocalRP(3) for the local traffic policing
+               - eqiTxLocalRP(4) for the local egress queue input
+               - eqoTxLocalRP(5) for the local egress queue output
+               - otherTxLocalRP(6) for any other local transmit point
+               - srcRemoteRP(7) for the remote source
+               - ingTxLocalRP(8) for the remote ingress queue input
+               - tpTxLocalRP(9) for the remote traffic policing
+               - eqiTxRemoteRP(10) for the remote egress queue input
+               - eqoTxRemoteRP(11) for the remote egress queue output
+               - otherTxRemoteRP(12) for any other remote xmit point"
+        REFERENCE
+            "FRF.13: Section 2.3"
+        SYNTAX      INTEGER {
+                      srcLocalRP(1),
+                      ingTxLocalRP(2),
+                      tpTxLocalRP(3),
+                      eqiTxLocalRP(4),
+                      eqoTxLocalRP(5),
+                      otherTxLocalRP(6),
+                      srcRemoteRP(7),
+                      ingTxRemoteRP(8),
+                      tpTxRemoteRP(9),
+                      eqiTxRemoteRP(10),
+                      eqoTxRemoteRP(11),
+                      otherTxRemoteRP(12)
+                    }
+
+    FrsldRxRP ::= TEXTUAL-CONVENTION
+        STATUS      current
+        DESCRIPTION
+            "The reference point a PVC uses for calculation
+             of receiver related statistics.
+
+             The valid values for this object are as follows:
+               - desLocalRP(1) for the local destination
+               - ingRxLocalRP(2) for the local ingress queue input
+               - tpRxLocalRP(3) for the local traffic policing
+               - eqiRxLocalRP(4) for the local egress queue input
+               - eqoRxLocalRP(5) for the local egress queue output
+               - otherRxLocalRP(6) for any other local receive point
+               - desRemoteRP(7) for the remote destination
+               - ingRxRemoteRP(8) for the remote ingress input
+               - tpRxRemoteRP(9) for the remote traffic policing
+               - eqiRxRemoteRP(10) for the remote egress queue input
+               - eqoRxRemoteRP(11) for the remote egress queue output
+               - otherRxRemoteRP(12) for any other remote receive point"
+        REFERENCE
+            "FRF.13: Section 2.3"
+        SYNTAX      INTEGER {
+                      desLocalRP(1),
+                      ingRxLocalRP(2),
+                      tpRxLocalRP(3),
+                      eqiRxLocalRP(4),
+                      eqoRxLocalRP(5),
+                      otherRxLocalRP(6),
+                      desRemoteRP(7),
+                      ingRxRemoteRP(8),
+                      tpRxRemoteRP(9),
+                      eqiRxRemoteRP(10),
+                      eqoRxRemoteRP(11),
+                      otherRxRemoteRP(12)
+                    }
+
+    --
+
+    -- Base Objects
+    ---
+
+    frsldObjects      OBJECT IDENTIFIER ::= { frsldMIB 1 }
+    frsldCapabilities OBJECT IDENTIFIER ::= { frsldMIB 2 }
+    frsldConformance  OBJECT IDENTIFIER ::= { frsldMIB 3 }
+
+    -- The Frame Relay Service Level Definitions PVC Control Table
+    --
+    -- This table is used to define and display the parameters of
+    -- service level definitions on individual PVCs.
+
+    frsldPvcCtrlTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FrsldPvcCtrlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Frame Relay Service Level Definitions
+             PVC control table."
+        ::= { frsldObjects 1 }
+
+    frsldPvcCtrlEntry OBJECT-TYPE
+        SYNTAX      FrsldPvcCtrlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Frame Relay Service Level
+             Definitions PVC control table."
+        INDEX    { ifIndex, frsldPvcCtrlDlci,
+                   frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}
+        ::= { frsldPvcCtrlTable 1 }
+
+    FrsldPvcCtrlEntry ::=
+        SEQUENCE {
+            --
+            -- Index Control Variables
+            --
+            frsldPvcCtrlDlci                DLCI,
+            frsldPvcCtrlTransmitRP          FrsldTxRP,
+            frsldPvcCtrlReceiveRP           FrsldRxRP,
+            frsldPvcCtrlStatus              RowStatus,
+            --
+            -- Service Level Definitions Setup Variables
+            --
+            frsldPvcCtrlPacketFreq          Integer32,
+            --
+            -- Delay Specific Setup Variables
+            --
+
+            frsldPvcCtrlDelayFrSize         Integer32,
+            frsldPvcCtrlDelayType           INTEGER,
+            frsldPvcCtrlDelayTimeOut        Integer32,
+            --
+            -- Data Persistence Control Variables
+            --
+            frsldPvcCtrlPurge               Integer32,
+            frsldPvcCtrlDeleteOnPurge       INTEGER,
+            frsldPvcCtrlLastPurgeTime       TimeStamp
+        }
+
+    frsldPvcCtrlDlci OBJECT-TYPE
+        SYNTAX      DLCI
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The value of this object is equal to the DLCI
+             value for this PVC."
+        ::= { frsldPvcCtrlEntry 1 }
+
+    frsldPvcCtrlTransmitRP OBJECT-TYPE
+        SYNTAX      FrsldTxRP
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The reference point this PVC uses for calculation
+             of transmitter related statistics.  This object
+             together with frsldPvcCtrlReceiveRP define the
+             measurement domain."
+        REFERENCE
+            "FRF.13: Section 2.3"
+        ::= { frsldPvcCtrlEntry 2 }
+
+    frsldPvcCtrlReceiveRP OBJECT-TYPE
+        SYNTAX      FrsldRxRP
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The reference point this PVC uses for calculation
+             of receiver related statistics.  This object
+             together with frsldPvcCtrlTransmitRP define the
+             measurement domain."
+        ::= { frsldPvcCtrlEntry 3 }
+
+    frsldPvcCtrlStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The status of the current row.  This object is
+             used to add, delete, and disable rows in this
+             table.  When the status changes to active(1) for the
+             first time, a row will also be added to the data
+             table below.  This row SHOULD not be removed until
+             the status is changed to deleted.
+
+             When this object is set to destroy(6), all associated
+             sample and data table rows will also be deleted.
+             When this object is changed from active(1) to any
+             other valid value, the defined purge behavior will
+             affect the data and sample tables.
+
+             The rows added to this table MUST have a valid
+             ifIndex and an ifType related to frame relay.  Further,
+             the reference points referred to by frsldPvcCtrlTransmitRP
+             and frsldPvcCtrlReceiveRP MUST be supported (see the
+             frsldRPCaps object).
+
+             If at any point the row is not in the active(1) state
+             and the DLCI no longer exists, the state SHOULD
+             report notReady(3).
+
+             The data in this table SHOULD persist through power
+             cycles.  The symantics of readiness for the rows still
+             applies.  This means that it is possible for a row to be
+             reprovisioned as notReady(3) if the underlying DLCI does
+             not persist."
+        ::= { frsldPvcCtrlEntry 4 }
+
+    frsldPvcCtrlPacketFreq OBJECT-TYPE
+        SYNTAX      Integer32 (0..3600)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The frequency in seconds between initiation of
+             specialized packets used to collect delay and / or
+             delivery information as supported by the device.
+             A value of zero indicates that no packets will
+             be sent."
+        DEFVAL { 60 }
+        ::= { frsldPvcCtrlEntry 5 }
+
+    frsldPvcCtrlDelayFrSize OBJECT-TYPE
+        SYNTAX      Integer32 (1..8188)
+        UNITS       "octets"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The size of the payload in the frame used for
+             calculation of network delay."
+        DEFVAL { 128 }
+        ::= { frsldPvcCtrlEntry 6 }
+
+    frsldPvcCtrlDelayType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                      oneWay(1),
+                      roundTrip(2)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The type of delay measurement performed."
+        REFERENCE
+            "FRF.13: Section 3"
+        ::= { frsldPvcCtrlEntry 7 }
+
+    frsldPvcCtrlDelayTimeOut OBJECT-TYPE
+        SYNTAX      Integer32 (1..3600)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "A delay frame will count as a missed poll if
+             it is not updated in the time specified by
+             frsldPvcCtrlDelayTimeOut."
+        DEFVAL { 60 }
+        ::= { frsldPvcCtrlEntry 8 }
+
+    frsldPvcCtrlPurge OBJECT-TYPE
+        SYNTAX      Integer32 (0..172800) -- up to 48 hours
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object defines the amount of time the device
+             will wait, after discovering that a DLCI does not exist,
+             the DLCI was deleted or the value of frsldPvcCtrlStatus
+             changes from active(1) to either notInService(2) or
+             notReady(3), prior to automatically purging the history
+             in the sample tables and resetting the data in the data
+             tables to all zeroes.  If frsldPvcCtrlStatus is manually
+             set to destroy(6), this object does not apply."
+        DEFVAL { 0 }
+        ::= { frsldPvcCtrlEntry 9 }
+
+    frsldPvcCtrlDeleteOnPurge OBJECT-TYPE
+        SYNTAX      INTEGER {
+                      none(1),
+                      sampleContols(2),
+                      all(3)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object defines whether rows will
+             automatically be deleted from the tables
+             when the information is purged.
+
+             - A value of none(1) indicates that no rows
+               will deleted.  The last known values will
+               be preserved.
+             - A value of sampleControls(2) indicates
+               that all associated sample control rows
+               will be deleted.
+             - A value of all(3) indicates that all
+               associated rows SHOULD be deleted."
+        DEFVAL { all }
+        ::= { frsldPvcCtrlEntry 10 }
+
+    frsldPvcCtrlLastPurgeTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object returns the value of sysUpTime
+             at the time the information was last purged.
+             This value SHOULD be set to the sysUpTime
+             upon setting frsldPvcCtrlStatus to active(1)
+             for the first time.  Each time a
+             discontinuity in the counters occurs, this
+             value MUST be set to the sysUpTime.
+
+             If frsldPvcCtrlStatus has never been active(1),
+             this object SHOULD return 0.
+
+             This object SHOULD be used as the discontinuity
+             timer for the counters in frsldPvcDataTable."
+        ::= { frsldPvcCtrlEntry 11 }
+
+    -- The Frame Relay Service Level Definitions Sampling Control
+    -- Table
+
+    --
+    -- This table is used to define the sample control parameters
+    -- of service level definitions on individual PVCs.
+
+    frsldSmplCtrlTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FrsldSmplCtrlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Frame Relay Service Level Definitions
+             sampling control table."
+        ::= { frsldObjects 2 }
+
+    frsldSmplCtrlEntry OBJECT-TYPE
+        SYNTAX      FrsldSmplCtrlEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Frame Relay Service Level
+             Definitions sample control table."
+        INDEX    { ifIndex, frsldPvcCtrlDlci,
+                   frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP,
+                   frsldSmplCtrlIdx }
+        ::= { frsldSmplCtrlTable 1 }
+
+    FrsldSmplCtrlEntry ::=
+        SEQUENCE {
+            --
+            -- Index Control Variables
+            --
+            frsldSmplCtrlIdx                Integer32,
+            frsldSmplCtrlStatus             RowStatus,
+            --
+            -- Collection Control Variables
+            --
+            frsldSmplCtrlColPeriod          Integer32,
+            frsldSmplCtrlBuckets            Integer32,
+            frsldSmplCtrlBucketsGranted     Integer32
+        }
+
+    frsldSmplCtrlIdx OBJECT-TYPE
+        SYNTAX  Integer32 (1..256)
+        MAX-ACCESS not-accessible
+        STATUS  current
+        DESCRIPTION
+            "The unique index for this row in the
+             sample control table."
+        ::= { frsldSmplCtrlEntry 1 }
+
+    frsldSmplCtrlStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The status of the current row.  This object is
+             used to add, delete, and disable rows in this
+             table.  This row SHOULD NOT be removed until the
+             status is changed to destroy(6).  When the status
+             changes to active(1), the collection in the sample
+             tables below will be activated.
+
+             The rows added to this table MUST have a valid
+             ifIndex, an ifType related to frame relay,
+             frsldPvcCtrlDlci MUST exist for the specified
+             ifIndex and frsldPvcCtrlStatus MUST have a
+             value of active(1).
+
+             The value of frsldPvcCtrlStatus MUST be active(1)
+             to transition this object to active(1).  If
+             the value of frsldPvcCtrlStatus becomes anything
+             other than active(1) when the state of this object
+             is not active(1), this object SHOULD be set to
+             notReady(3).
+
+             The data in this table SHOULD persist through power
+             cycles.  The symantics of readiness for the rows still
+             applies.  This means that it is possible for a row to be
+             reprovisioned as notReady(3) if the underlying DLCI does
+             not persist."
+        ::= { frsldSmplCtrlEntry 2 }
+
+    frsldSmplCtrlColPeriod OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The amount of time in seconds that defines a
+             period of collection for the statistics.
+             At the end of each period, the statistics will be
+             sampled and a row is added to the sample table."
+        ::= { frsldSmplCtrlEntry 3 }
+
+    frsldSmplCtrlBuckets OBJECT-TYPE
+        SYNTAX      Integer32 (1..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The number of discrete buckets over which the
+             data statistics are sampled.
+
+             When this object is created or modified, the device
+             SHOULD attempt to set the frsldSmplCtrlBuckets-
+             Granted to a value as close as is possible
+             depending upon the implementation and the available
+             resources."
+        DEFVAL { 60 }
+        ::= { frsldSmplCtrlEntry 4 }
+
+    frsldSmplCtrlBucketsGranted OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of discrete buckets granted.  This
+             object will return 0 until frsldSmplCtrlStatus is
+             set to active(1).  At that time the buckets will be
+             allocated depending upon implementation and
+             available resources."
+        ::= { frsldSmplCtrlEntry 5 }
+
+    -- The Frame Relay Service Level Definitions PVC Data Table
+    --
+    -- This table contains the accumulated values of
+    -- the collected data.  This table is the table that should
+    -- be referenced by external polling mechanisms if time
+    -- based polling be desired.
+
+     frsldPvcDataTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FrsldPvcDataEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Frame Relay Service Level Definitions
+             data table.
+
+             This table contains accumulated values of the
+             collected data.  It is the table that should be
+             referenced by external polling mechanisms if
+             time based polling be desired."
+        ::= { frsldObjects 3 }
+
+    frsldPvcDataEntry OBJECT-TYPE
+        SYNTAX      FrsldPvcDataEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Frame Relay Service Level
+             Definitions data table."
+        INDEX    { ifIndex, frsldPvcCtrlDlci,
+                  frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}
+        ::= { frsldPvcDataTable 1 }
+
+    FrsldPvcDataEntry ::=
+        SEQUENCE {
+            frsldPvcDataMissedPolls       Counter32,
+            frsldPvcDataFrDeliveredC      Counter32,
+            frsldPvcDataFrDeliveredE      Counter32,
+            frsldPvcDataFrOfferedC        Counter32,
+            frsldPvcDataFrOfferedE        Counter32,
+            frsldPvcDataDataDeliveredC    Counter32,
+            frsldPvcDataDataDeliveredE    Counter32,
+            frsldPvcDataDataOfferedC      Counter32,
+            frsldPvcDataDataOfferedE      Counter32,
+            frsldPvcDataHCFrDeliveredC    Counter64,
+            frsldPvcDataHCFrDeliveredE    Counter64,
+            frsldPvcDataHCFrOfferedC      Counter64,
+            frsldPvcDataHCFrOfferedE      Counter64,
+            frsldPvcDataHCDataDeliveredC  Counter64,
+            frsldPvcDataHCDataDeliveredE  Counter64,
+            frsldPvcDataHCDataOfferedC    Counter64,
+            frsldPvcDataHCDataOfferedE    Counter64,
+            frsldPvcDataUnavailableTime   TimeTicks,
+            frsldPvcDataUnavailables      Counter32
+        }
+
+    frsldPvcDataMissedPolls OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of polls that have been determined
+             to be missed.  These polls are typically associated
+             with the calculation of delay but may also be
+             used for the calculation of other statistics.  If an
+             anticipated poll is not received in a reasonable
+             amount of time, it should be counted as missed.
+             The value used to determine the reasonable amount
+             of time is contained in frsldPvcCtrlDelayTimeOut.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+
+             frsldPvcCtrlLastPurgeTime."
+        ::= { frsldPvcDataEntry 1 }
+
+    frsldPvcDataFrDeliveredC OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliveredc)"
+        ::= { frsldPvcDataEntry 2 }
+
+    frsldPvcDataFrDeliveredE OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent in excess of the CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliverede)"
+        ::= { frsldPvcDataEntry 3 }
+
+    frsldPvcDataFrOfferedC OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP within CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferedc)"
+        ::= { frsldPvcDataEntry 4 }
+
+    frsldPvcDataFrOfferedE OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferede)"
+        ::= { frsldPvcDataEntry 5 }
+
+    frsldPvcDataDataDeliveredC OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliveredc)"
+        ::= { frsldPvcDataEntry 6 }
+
+    frsldPvcDataDataDeliveredE OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent in excess of the CIR.
+
+             Discontinuities in the value of this counter can
+
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliverede)"
+        ::= { frsldPvcDataEntry 7 }
+
+    frsldPvcDataDataOfferedC OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP within CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferedc)"
+        ::= { frsldPvcDataEntry 8 }
+
+    frsldPvcDataDataOfferedE OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferede)"
+        ::= { frsldPvcDataEntry 9 }
+
+    frsldPvcDataHCFrDeliveredC OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR.  This object is a 64-bit version
+             of frsldPvcDataFrDeliveredC.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliveredc)"
+        ::= { frsldPvcDataEntry 10 }
+
+    frsldPvcDataHCFrDeliveredE OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent in excess of the CIR.  This object is a 64-bit
+             version of frsldPvcDataFrDeliveredE.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliverede)"
+        ::= { frsldPvcDataEntry 11 }
+
+    frsldPvcDataHCFrOfferedC OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP within CIR.  This object is
+             a 64-bit version of frsldPvcDataFrOfferedC.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferedc)"
+        ::= { frsldPvcDataEntry 12 }
+
+    frsldPvcDataHCFrOfferedE OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR.  This
+             object is a 64-bit version of frsldPvcDataFrOfferedE.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferede)"
+        ::= { frsldPvcDataEntry 13 }
+
+    frsldPvcDataHCDataDeliveredC OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR.  This object is a 64-bit version of
+             frsldPvcDataDataDeliveredC.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliveredc)"
+        ::= { frsldPvcDataEntry 14 }
+
+    frsldPvcDataHCDataDeliveredE OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent in excess of the CIR.  This object is a 64-bit
+             version of frsldPvcDataDataDeliveredE.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliverede)"
+        ::= { frsldPvcDataEntry 15 }
+
+    frsldPvcDataHCDataOfferedC OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP within CIR.  This object is
+             a 64-bit version of frsldPvcDataDataOfferedC.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferedc)"
+        ::= { frsldPvcDataEntry 16 }
+
+    frsldPvcDataHCDataOfferedE OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR.
+             This object is a 64-bit version of
+             frsldPvcDataDataOfferedE.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferede)"
+        ::= { frsldPvcDataEntry 17 }
+
+    frsldPvcDataUnavailableTime OBJECT-TYPE
+        SYNTAX      TimeTicks
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The amount of time this PVC was declared unavailable
+             for any reason since this row was created."
+        REFERENCE
+            "FRF.13: Section 6.1 (OutageTime)"
+        ::= { frsldPvcDataEntry 18 }
+
+    frsldPvcDataUnavailables OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of times this PVC was declared unavailable
+             for any reason since this row was created.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system
+             and at other times as indicated by
+             frsldPvcCtrlLastPurgeTime."
+        REFERENCE
+            "FRF.13: Section 6.1 (OutageCount)"
+        ::= { frsldPvcDataEntry 19 }
+
+    -- The Frame Relay Service Level Definitions PVC Sample Table
+    --
+    -- This table contains the sampled delay, delivery and
+    -- availability information.
+
+    frsldPvcSampleTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FrsldPvcSampleEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Frame Relay Service Level Definitions
+             sample table."
+        ::= { frsldObjects 4 }
+
+    frsldPvcSampleEntry OBJECT-TYPE
+        SYNTAX      FrsldPvcSampleEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Frame Relay Service Level
+             Definitions data sample table."
+        INDEX    { ifIndex, frsldPvcCtrlDlci,
+                   frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP,
+                   frsldSmplCtrlIdx, frsldPvcSmplIdx }
+        ::= { frsldPvcSampleTable 1 }
+
+    FrsldPvcSampleEntry ::=
+        SEQUENCE {
+            frsldPvcSmplIdx              Integer32,
+            frsldPvcSmplDelayMin         Gauge32,
+            frsldPvcSmplDelayMax         Gauge32,
+            frsldPvcSmplDelayAvg         Gauge32,
+            frsldPvcSmplMissedPolls      Gauge32,
+            frsldPvcSmplFrDeliveredC     Gauge32,
+            frsldPvcSmplFrDeliveredE     Gauge32,
+            frsldPvcSmplFrOfferedC       Gauge32,
+            frsldPvcSmplFrOfferedE       Gauge32,
+            frsldPvcSmplDataDeliveredC   Gauge32,
+            frsldPvcSmplDataDeliveredE   Gauge32,
+            frsldPvcSmplDataOfferedC     Gauge32,
+            frsldPvcSmplDataOfferedE     Gauge32,
+            frsldPvcSmplHCFrDeliveredC   CounterBasedGauge64,
+            frsldPvcSmplHCFrDeliveredE   CounterBasedGauge64,
+            frsldPvcSmplHCFrOfferedC     CounterBasedGauge64,
+            frsldPvcSmplHCFrOfferedE     CounterBasedGauge64,
+            frsldPvcSmplHCDataDeliveredC CounterBasedGauge64,
+            frsldPvcSmplHCDataDeliveredE CounterBasedGauge64,
+            frsldPvcSmplHCDataOfferedC   CounterBasedGauge64,
+            frsldPvcSmplHCDataOfferedE   CounterBasedGauge64,
+            frsldPvcSmplUnavailableTime  TimeTicks,
+            frsldPvcSmplUnavailables     Gauge32,
+            frsldPvcSmplStartTime        TimeStamp,
+            frsldPvcSmplEndTime          TimeStamp
+        }
+
+    frsldPvcSmplIdx OBJECT-TYPE
+        SYNTAX      Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The bucket index of the current sample.  This
+             increments once for each new bucket in the
+             table."
+        ::= { frsldPvcSampleEntry 1 }
+
+    frsldPvcSmplDelayMin OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The minimum delay reported in microseconds measured
+             for any information packet that arrived during this
+             interval.
+
+             A value of zero means that no data is available."
+        REFERENCE
+            "FRF.13: Section 3.1 (FTD)"
+        ::= { frsldPvcSampleEntry 2 }
+
+    frsldPvcSmplDelayMax OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The largest delay reported in microseconds measured
+             for any information packet that arrived during this
+             interval.
+
+             A value of zero means that no data is available."
+        REFERENCE
+            "FRF.13: Section 3.1 (FTD)"
+        ::= { frsldPvcSampleEntry 3 }
+
+    frsldPvcSmplDelayAvg OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The average delay reported in microseconds measured
+             for all delay packets that arrived during this
+             interval.
+
+             A value of zero means that no data is available."
+        REFERENCE
+            "FRF.13: Section 3.1 (FTD)"
+        ::= { frsldPvcSampleEntry 4 }
+
+    frsldPvcSmplMissedPolls OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of polls that were missed during
+             this interval."
+        ::= { frsldPvcSampleEntry 5 }
+
+    frsldPvcSmplFrDeliveredC OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR during this interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCFrDeliveredC."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliveredc)"
+        ::= { frsldPvcSampleEntry 6 }
+
+    frsldPvcSmplFrDeliveredE OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent in excess of the CIR during this interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCFrDeliveredE."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliverede))"
+        ::= { frsldPvcSampleEntry 7 }
+
+    frsldPvcSmplFrOfferedC OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP within CIR during this
+             interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCFrOfferedC."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferedc)"
+        ::= { frsldPvcSampleEntry 8 }
+
+    frsldPvcSmplFrOfferedE OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR
+             during this interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCFrOfferedE."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferede)"
+        ::= { frsldPvcSampleEntry 9 }
+
+    frsldPvcSmplDataDeliveredC OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR during this interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCDataDeliveredC."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliveredc)"
+        ::= { frsldPvcSampleEntry 10 }
+
+    frsldPvcSmplDataDeliveredE OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlDeliveredRP and determined to have been
+             sent in excess of the CIR during this interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCDataDeliveredE."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliverede)"
+        ::= { frsldPvcSampleEntry 11 }
+
+    frsldPvcSmplDataOfferedC OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+
+             frsldPvcCtrlTransmitRP within CIR during this
+             interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCDataOfferredC."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferedc)"
+        ::= { frsldPvcSampleEntry 12 }
+
+    frsldPvcSmplDataOfferedE OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR
+             during this interval.
+
+             If it is the case that the high capacity counters
+             are also used, this MUST report the value of the
+             lower 32 bits of the CounterBasedGauge64 value of
+             frsldPvcSmplHCDataOfferedE."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferede)"
+        ::= { frsldPvcSampleEntry 13 }
+
+    frsldPvcSmplHCFrDeliveredC OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR during this interval.  This object
+             is a 64-bit version of frsldPvcSmplFrDeliveredC."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliveredc)"
+        ::= { frsldPvcSampleEntry 14 }
+
+    frsldPvcSmplHCFrDeliveredE OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+
+             sent in excess of the CIR during this interval.
+             This object is a 64-bit version of frsldPvcSmpl-
+             FrDeliveredE."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesDeliverede)"
+       ::= { frsldPvcSampleEntry 15 }
+
+    frsldPvcSmplHCFrOfferedC OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP within CIR during this
+             interval.  This object is a 64-bit version of
+             frsldPvcSmplFrOfferedC."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferedc)"
+        ::= { frsldPvcSampleEntry 16 }
+
+    frsldPvcSmplHCFrOfferedE OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of frames that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR
+             during this interval.  This object is a 64-bit
+             version of frsldPvcSmplFrOfferedE."
+        REFERENCE
+            "FRF.13: Section 4.1 (FramesOfferede)"
+        ::= { frsldPvcSampleEntry 17 }
+
+    frsldPvcSmplHCDataDeliveredC OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent within CIR during this interval.  This value
+             is a 64-bit version of frsldPvcSmplDataDeliveredC."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliveredc)"
+        ::= { frsldPvcSampleEntry 18 }
+
+    frsldPvcSmplHCDataDeliveredE OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were received at
+             frsldPvcCtrlReceiveRP and determined to have been
+             sent in excess of the CIR during this interval.  This
+             value is a 64-bit version of frsldPvcSmplData-
+             DeliveredE."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataDeliverede)"
+        ::= { frsldPvcSampleEntry 19 }
+
+    frsldPvcSmplHCDataOfferedC OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP within CIR during this
+             interval.  This value is a 64-bit version of
+             frsldPvcSmplDataOfferedC."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferedc)"
+        ::= { frsldPvcSampleEntry 20 }
+
+    frsldPvcSmplHCDataOfferedE OBJECT-TYPE
+        SYNTAX      CounterBasedGauge64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of octets that were offered through
+             frsldPvcCtrlTransmitRP in excess of the CIR
+             during this interval.  This object is a 64-bit
+             version of frsldPvcSmplDataOfferedE."
+        REFERENCE
+            "FRF.13: Section 5.1 (DataOfferede)"
+        ::= { frsldPvcSampleEntry 21 }
+
+    frsldPvcSmplUnavailableTime OBJECT-TYPE
+        SYNTAX  TimeTicks
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The amount of time this PVC was declared
+             unavailable for any reason during this interval."
+        REFERENCE
+            "FRF.13: Section 6.1 (OutageTime)"
+        ::= { frsldPvcSampleEntry 22 }
+
+    frsldPvcSmplUnavailables OBJECT-TYPE
+        SYNTAX  Gauge32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The number of times this PVC was declared
+             unavailable for any reason during this interval."
+        REFERENCE
+            "FRF.13: Section 6.1 (OutageCount)"
+        ::= { frsldPvcSampleEntry 23 }
+
+    frsldPvcSmplStartTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when this sample interval
+             started."
+        ::= { frsldPvcSampleEntry 24 }
+
+    frsldPvcSmplEndTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when this sample interval
+             ended.  No data will be reported and the row will
+             not appear in the table until the sample has
+             been collected."
+        ::= { frsldPvcSampleEntry 25 }
+
+    -- Capabilities Group
+    -- This group provides capabilities objects for the tables
+    -- that control configuration.
+
+    frsldPvcCtrlWriteCaps OBJECT-TYPE
+        SYNTAX  BITS {
+               frsldPvcCtrlStatus(0),
+               frsldPvcCtrlPacketFreq(1),
+               frsldPvcCtrlDelayFrSize(2),
+               frsldPvcCtrlDelayType(3),
+               frsldPvcCtrlDelayTimeOut(4),
+               frsldPvcCtrlPurge(5),
+               frsldPvcCtrlDeleteOnPurge(6)
+        }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object specifies the write capabilities
+             for the read-create objects of the PVC Control
+             table.  If the corresponding bit is enabled (1),
+             the agent supports writes to that object."
+        ::= { frsldCapabilities 1 }
+
+    frsldSmplCtrlWriteCaps OBJECT-TYPE
+        SYNTAX  BITS {
+               frsldSmplCtrlStatus(0),
+               frsldSmplCtrlBuckets(1)
+        }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object specifies the write capabilities
+             for the read-create objects of the Sample Control
+             table.  If the corresponding bit is enabled (1),
+             the agent supports writes to that object."
+        ::= { frsldCapabilities 2 }
+
+    frsldRPCaps OBJECT-TYPE
+        SYNTAX  BITS {
+               srcLocalRP(0),
+               ingTxLocalRP(1),
+               tpTxLocalRP(2),
+               eqiTxLocalRP(3),
+               eqoTxLocalRP(4),
+               otherTxLocalRP(5),
+               srcRemoteRP(6),
+               ingTxRemoteRP(7),
+               tpTxRemoteRP(8),
+               eqiTxRemoteRP(9),
+               eqoTxRemoteRP(10),
+               otherTxRemoteRP(11),
+               desLocalRP(12),
+               ingRxLocalRP(13),
+               tpRxLocalRP(14),
+               eqiRxLocalRP(15),
+               eqoRxLocalRP(16),
+               otherRxLocalRP(17),
+               desRemoteRP(18),
+               ingRxRemoteRP(19),
+               tpRxRemoteRP(20),
+               eqiRxRemoteRP(21),
+               eqoRxRemoteRP(22),
+               otherRxRemoteRP(23)
+        }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "This object specifies the reference points that
+             the agent supports.  This object allows the management
+             application to discover which rows can be created on
+             a specific device."
+        ::= { frsldCapabilities 3 }
+
+    frsldMaxPvcCtrls   OBJECT-TYPE
+        SYNTAX      Integer32 (0..2147483647)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The maximum number of control rows that can be created
+             in frsldPvcCtrlTable.  Sets to this object lower than
+             the current value of frsldNumPvcCtrls should result in
+             inconsistentValue."
+        ::= { frsldCapabilities 4 }
+
+    frsldNumPvcCtrls   OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current number of rows in frsldPvcCtrlTable."
+        ::= { frsldCapabilities 5 }
+
+    frsldMaxSmplCtrls   OBJECT-TYPE
+        SYNTAX      Integer32 (0..2147483647)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The maximum number of control rows that can be created
+             in frsldSmplCtrlTable.  Sets to this object lower than
+             the current value of frsldNumSmplCtrls should result in
+             inconsistentValue."
+        ::= { frsldCapabilities 6 }
+
+    frsldNumSmplCtrls   OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current number of rows in frsldSmplCtrlTable."
+        ::= { frsldCapabilities 7 }
+
+    -- Conformance Information
+
+    frsldMIBGroups      OBJECT IDENTIFIER ::= { frsldConformance 1 }
+    frsldMIBCompliances OBJECT IDENTIFIER ::= { frsldConformance 2 }
+
+    --
+    -- Compliance Statements
+    --
+
+    frsldCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "The compliance statement for SNMP entities
+             which support with Frame Relay Service Level
+             Definitions.  This group defines the minimum
+             level of support required for compliance."
+        MODULE -- this module
+            MANDATORY-GROUPS { frsldPvcReqCtrlGroup,
+                               frsldPvcReqDataGroup,
+                               frsldCapabilitiesGroup}
+
+            GROUP       frsldPvcHCFrameDataGroup
+            DESCRIPTION
+               "This group is mandatory only for those network
+                interfaces with corresponding instance of ifSpeed
+                 greater than 650,000,000 bits/second."
+
+            GROUP       frsldPvcHCOctetDataGroup
+            DESCRIPTION
+               "This group is mandatory only for those network
+                interfaces with corresponding instance of ifSpeed
+                greater than 650,000,000 bits/second."
+
+            GROUP       frsldPvcPacketGroup
+            DESCRIPTION
+               "This group is optional.  Network interfaces that
+                allow control of the packets used to collect
+                information are encouraged to implement this
+                group."
+
+            GROUP       frsldPvcDelayCtrlGroup
+            DESCRIPTION
+               "This group is optional.  Network interfaces that
+                offer control of the delay measurement are
+                strongly encouraged to implement this group."
+
+            GROUP       frsldPvcSampleCtrlGroup
+            DESCRIPTION
+               "This group is mandatory only for those network
+
+                interfaces that allow data sampling."
+
+            GROUP       frsldPvcDelayDataGroup
+            DESCRIPTION
+               "This group is only mandatory when
+                frsldPvcDelayCtrlGroup is implemented.  It is
+                strongly encouraged that any device capable
+                of measuring delay implement this group."
+
+            GROUP       frsldPvcSampleDelayGroup
+            DESCRIPTION
+               "This group is only mandatory when both
+                frsldPvcSampleCtrlGroup and frsldPvcDelayDataGroup
+                are supported."
+
+            GROUP       frsldPvcSampleDataGroup
+            DESCRIPTION
+               "This group is mandatory whenever
+                frsldPvcSampleCtrlGroup is supported."
+
+            GROUP       frsldPvcSampleHCFrameGroup
+            DESCRIPTION
+               "This group is mandatory whenever both
+                frsldPvcSampleCtrlGroup and frsldPvcHCFrameDataGroup
+                are supported."
+
+            GROUP       frsldPvcSampleHCDataGroup
+            DESCRIPTION
+               "This group is mandatory whenever both
+                frsldPvcSampleCtrlGroup and frsldPvcHCOctetDataGroup
+                are supported."
+
+            GROUP       frsldPvcSampleAvailGroup
+            DESCRIPTION
+               "This group is mandatory whenever
+                frsldPvcSampleCtrlGroup is supported."
+
+            GROUP       frsldPvcSampleGeneralGroup
+            DESCRIPTION
+               "This group is mandatory whenever
+                frsldPvcSampleCtrlGroup is supported."
+
+            OBJECT      frsldPvcCtrlStatus
+            SYNTAX      RowStatus { active(1) } -- subset of RowStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "Row creation can be done outside of the scope of
+                the SNMP protocol.  If this object is implemented
+
+                with max-access of read-only, then the only value
+                that MUST be returned is active(1) and
+                frsldPvcCtrlWriteCaps MUST return 0 for the
+                frsldPvcCtrlStatus(0) bit."
+
+            OBJECT      frsldPvcCtrlPurge
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required.  If this object is
+                 implemented with a max-access of read-only, then
+                 the frsldPvcCtrlPurge(5) bit must return 0."
+
+            OBJECT      frsldPvcCtrlDeleteOnPurge
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required.  If this object is
+                 implemented with a max-access of read-only, then
+                 the frsldPvcCtrlDeleteOnPurge(6) bit must return
+                 0."
+
+            OBJECT      frsldMaxPvcCtrls
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required if the device either
+                 dynamically allocates memory or statically allocates
+                 a fixed number of entries.  In the case of static
+                 allocation, the device should always report the
+                 correct maximum number of controls.  In the case
+                 of dynamic allocation, the device SHOULD always
+                 report a number greater than frsldNumPvcCtrls
+                 when allocation is possible and a number equal to
+                 frsldNumPvcCtrls when allocation is not possible."
+            OBJECT      frsldMaxSmplCtrls
+            MIN-ACCESS  read-only
+            DESCRIPTION
+                "Write access is not required if the device either
+                 dynamically allocates memory or statically allocates
+                 a fixed number of entries.  In the case of static
+                 allocation, the device should always report the
+                 correct maximum number of controls.  In the case
+                 of dynamic allocation, the device SHOULD always
+                 report a number greater than frsldNumSmplCtrls
+                 when allocation is possible and a number equal to
+                 frsldNumSmplCtrls when allocation is not possible."
+    ::= { frsldMIBCompliances 1 }
+
+    --
+
+    -- Units of Conformance
+    --
+    frsldPvcReqCtrlGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcCtrlStatus,
+            frsldPvcCtrlPurge,
+            frsldPvcCtrlDeleteOnPurge,
+            frsldPvcCtrlLastPurgeTime
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of required objects providing
+            control information applicable to a PVC which
+            implements Service Level Definitions."
+       ::= { frsldMIBGroups 1 }
+
+    frsldPvcPacketGroup OBJECT-GROUP
+       OBJECTS {
+            frsldPvcCtrlPacketFreq
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing packet
+            level control information applicable to a PVC which
+            implements Service Level Definitions."
+       ::= { frsldMIBGroups 2 }
+
+    frsldPvcDelayCtrlGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcCtrlDelayFrSize,
+            frsldPvcCtrlDelayType,
+            frsldPvcCtrlDelayTimeOut
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing delay
+            control information applicable to a PVC which
+            implements Service Level Definitions.
+
+            If this group is implemented, frsldPvcPacketGroup
+            and frsldPvcDelayDataGroup MUST also be implemented."
+       ::= { frsldMIBGroups 3 }
+
+    frsldPvcSampleCtrlGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldSmplCtrlStatus,
+            frsldSmplCtrlColPeriod,
+            frsldSmplCtrlBuckets,
+            frsldSmplCtrlBucketsGranted
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing sample
+            control information applicable to a PVC which
+            implements Service Level Definitions.
+
+            If this group is implemented, frsldPvcReqDataGroup
+            and frsldPvcSampleGeneralGroup MUST also be
+            implemented."
+       ::= { frsldMIBGroups 4 }
+
+    frsldPvcReqDataGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcDataFrDeliveredC,
+            frsldPvcDataFrDeliveredE,
+            frsldPvcDataFrOfferedC,
+            frsldPvcDataFrOfferedE,
+            frsldPvcDataDataDeliveredC,
+            frsldPvcDataDataDeliveredE,
+            frsldPvcDataDataOfferedC,
+            frsldPvcDataDataOfferedE,
+            frsldPvcDataUnavailableTime,
+            frsldPvcDataUnavailables
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of required objects providing data
+            collected on a PVC which implements Service
+            Level Definitions."
+       ::= { frsldMIBGroups 5 }
+
+    frsldPvcDelayDataGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcDataMissedPolls
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing delay
+            data collected on a PVC which implements Service
+            Level Definitions.
+
+            If this group is implemented, frsldPvcDelayCtrlGroup
+            MUST also be implemented."
+       ::= { frsldMIBGroups 6 }
+
+    frsldPvcHCFrameDataGroup  OBJECT-GROUP
+
+       OBJECTS {
+            frsldPvcDataHCFrDeliveredC,
+            frsldPvcDataHCFrDeliveredE,
+            frsldPvcDataHCFrOfferedC,
+            frsldPvcDataHCFrOfferedE
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing high
+            capacity frame data collected on a PVC which
+            implements Service Level Definitions."
+       ::= { frsldMIBGroups 7 }
+
+    frsldPvcHCOctetDataGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcDataHCDataDeliveredC,
+            frsldPvcDataHCDataDeliveredE,
+            frsldPvcDataHCDataOfferedC,
+            frsldPvcDataHCDataOfferedE
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing high
+            capacity octet data collected on a PVC which
+            implements Service Level Definitions."
+       ::= { frsldMIBGroups 8 }
+
+    frsldPvcSampleDelayGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcSmplDelayMin,
+            frsldPvcSmplDelayMax,
+            frsldPvcSmplDelayAvg,
+            frsldPvcSmplMissedPolls
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing delay
+            sample data collected on a PVC which implements
+            Service Level Definitions.
+
+            If this group is implemented, frsldPvcDelayCtrlGroup
+            MUST also be implemented."
+       ::= { frsldMIBGroups 9 }
+
+    frsldPvcSampleDataGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcSmplFrDeliveredC,
+            frsldPvcSmplFrDeliveredE,
+            frsldPvcSmplFrOfferedC,
+            frsldPvcSmplFrOfferedE,
+            frsldPvcSmplDataDeliveredC,
+            frsldPvcSmplDataDeliveredE,
+            frsldPvcSmplDataOfferedC,
+            frsldPvcSmplDataOfferedE
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing data
+            and frame delivery sample data collected on a PVC
+            which implements Service Level Definitions.
+
+            If this group is implemented, frsldPvcReqDataGroup
+            MUST also be implemented."
+       ::= { frsldMIBGroups 10 }
+
+    frsldPvcSampleHCFrameGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcSmplHCFrDeliveredC,
+            frsldPvcSmplHCFrDeliveredE,
+            frsldPvcSmplHCFrOfferedC,
+            frsldPvcSmplHCFrOfferedE
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing high
+            capacity frame delivery sample data collected on a PVC
+            which implements Service Level Definitions.
+
+            If this group is implemented, frsldPvcHCFrameDataGroup
+            MUST also be implemented."
+       ::= { frsldMIBGroups 11 }
+
+    frsldPvcSampleHCDataGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcSmplHCDataDeliveredC,
+            frsldPvcSmplHCDataDeliveredE,
+            frsldPvcSmplHCDataOfferedC,
+            frsldPvcSmplHCDataOfferedE
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing high
+            capacity data delivery sample data collected on a PVC
+            which implements Service Level Definitions.
+
+            If this group is implemented, frsldPvcHCOctetDataGroup
+
+            MUST also be implemented."
+       ::= { frsldMIBGroups 12 }
+
+    frsldPvcSampleAvailGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcSmplUnavailableTime,
+            frsldPvcSmplUnavailables
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing
+            availability sample data collected on a PVC which
+            implements Service Level Definitions.
+
+            If this group is implemented, frsldPvcReqDataGroup
+            MUST also be implemented."
+       ::= { frsldMIBGroups 13 }
+
+    frsldPvcSampleGeneralGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcSmplStartTime,
+            frsldPvcSmplEndTime
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of optional objects providing
+            general sample data collected on a PVC which
+            implements Service Level Definitions."
+       ::= { frsldMIBGroups 14 }
+
+    frsldCapabilitiesGroup  OBJECT-GROUP
+       OBJECTS {
+            frsldPvcCtrlWriteCaps,
+            frsldSmplCtrlWriteCaps,
+            frsldRPCaps,
+            frsldMaxPvcCtrls,
+            frsldNumPvcCtrls,
+            frsldMaxSmplCtrls,
+            frsldNumSmplCtrls
+       }
+       STATUS  current
+       DESCRIPTION
+           "A collection of required objects providing
+            capability information and control for this
+            MIB module."
+       ::= { frsldMIBGroups 15 }
+END
diff --git a/snmp_builder/mibs/Finisher-MIB.mib b/snmp_builder/mibs/Finisher-MIB.mib
new file mode 100644
index 0000000..27f3fa6
--- /dev/null
+++ b/snmp_builder/mibs/Finisher-MIB.mib
@@ -0,0 +1,869 @@
+Finisher-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, mib-2
+        FROM SNMPv2-SMI                                  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                                 -- [RFC2580]
+    hrDeviceIndex
+        FROM HOST-RESOURCES-MIB                          -- [RFC2790]
+    PrtInputTypeTC, PrtMarkerSuppliesTypeTC
+        FROM IANA-PRINTER-MIB                            -- [RFC3805]
+    printmib, PrtSubUnitStatusTC, PrtLocalizedDescriptionStringTC,
+        PrtMarkerSuppliesSupplyUnitTC, PrtMediaUnitTC,
+        PrtCapacityUnitTC, PrtMarkerSuppliesClassTC,
+        PresentOnOff, prtMIBConformance
+        FROM Printer-MIB                                 -- [RFC3805]
+    FinDeviceTypeTC, FinAttributeTypeTC
+        FROM IANA-FINISHER-MIB;
+
+finisherMIB MODULE-IDENTITY
+    LAST-UPDATED "200406020000Z"
+    ORGANIZATION "PWG IEEE/ISTO Printer Working Group"
+    CONTACT-INFO
+        "Harry Lewis
+        IBM
+        Phone (303) 924-5337
+        Email: harryl@us.ibm.com
+
+        Send comments to the printmib WG using the Finisher MIB
+        Project (FIN) Mailing List:  fin@pwg.org
+
+        For further information, access the PWG web page under 'Finisher
+        MIB':      http://www.pwg.org/
+
+        Implementers of this specification are encouraged to join the
+        fin mailing list in order to participate in discussions on any
+        clarifications needed and registration proposals being reviewed
+        in order to achieve consensus."
+    DESCRIPTION
+        "The MIB module for management of printers.
+         Copyright (C) The Internet Society (2004). This
+         version of this MIB module was published
+
+         in RFC 3806. For full legal notices see the RFC itself."
+    REVISION "200406020000Z"
+    DESCRIPTION
+        "The original version of this MIB."
+    ::= { mib-2  111 }
+
+ -- Finisher Device Group (Mandatory)
+--
+-- A printer may support zero or more finishing subunits.  A
+-- finishing device subunit may be associated with one or more
+-- output subunits and one or more media path subunits.
+
+finDevice  OBJECT IDENTIFIER  ::=  { printmib 30 }
+
+finDeviceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FinDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "This table defines the finishing device subunits,
+       including information regarding possible configuration
+       options and the status for each finisher device subunit."
+    ::= { finDevice 1 }
+
+finDeviceEntry OBJECT-TYPE
+    SYNTAX      FinDeviceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "There is an entry in the finishing device table for each
+       possible finisher process.  Each individual finisher process is
+       implemented by a finishing device represented in this table."
+    INDEX  { hrDeviceIndex, finDeviceIndex }
+    ::= { finDeviceTable 1 }
+
+FinDeviceEntry ::= SEQUENCE {
+      finDeviceIndex                 Integer32,
+      finDeviceType                  FinDeviceTypeTC,
+      finDevicePresentOnOff          PresentOnOff,
+      finDeviceCapacityUnit          PrtCapacityUnitTC,
+      finDeviceMaxCapacity           Integer32,
+      finDeviceCurrentCapacity       Integer32,
+      finDeviceAssociatedMediaPaths  OCTET STRING,
+      finDeviceAssociatedOutputs     OCTET STRING,
+      finDeviceStatus                PrtSubUnitStatusTC,
+      finDeviceDescription           PrtLocalizedDescriptionStringTC
+     }
+
+finDeviceIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "A unique value used to identify a finisher process.
+       Although these values may change due to a major
+       reconfiguration of the printer system (e.g., the addition
+       of new finishing processes), the values are normally
+       expected to remain stable across successive power cycles."
+    ::= { finDeviceEntry 1 }
+
+finDeviceType OBJECT-TYPE
+    SYNTAX      FinDeviceTypeTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "Defines the type of finishing process associated with this
+       table row entry."
+    ::= { finDeviceEntry 2 }
+
+finDevicePresentOnOff OBJECT-TYPE
+    SYNTAX      PresentOnOff
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "Indicates if this finishing device subunit is available
+       and whether the device subunit is enabled."
+    DEFVAL      { notPresent }
+    ::= { finDeviceEntry 3 }
+
+finDeviceCapacityUnit OBJECT-TYPE
+    SYNTAX      PrtCapacityUnitTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The unit of measure for specifying the capacity of this
+       finisher device subunit."
+    ::= { finDeviceEntry 4 }
+
+finDeviceMaxCapacity OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The maximum capacity of this finisher device subunit in
+       finDeviceCapacityUnits.  If the device can reliably sense
+       this value, the value is sensed by the finisher device
+
+       and is read-only: otherwise the value may be written by a
+       management or control console application.  The value (-1)
+       means other and specifically indicates that the device
+       places no restrictions on this parameter.  The value (-2)
+       means unknown."
+    DEFVAL      { -2 }      -- unknown
+    ::= { finDeviceEntry 5 }
+
+finDeviceCurrentCapacity OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The current capacity of this finisher device subunit in
+       finDeviceCapacityUnits.  If the device can reliably sense
+       this value, the value is sensed by the finisher and is
+       read-only: otherwise the value may be written by a
+       management or control console application.  The value (-1)
+       means other and specifically indicates that the device
+       places no restrictions on this parameter.  The value (-2)
+       means unknown."
+    DEFVAL      { -2 }      -- unknown
+    ::= { finDeviceEntry 6 }
+
+finDeviceAssociatedMediaPaths OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..63))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "Indicates the media paths which can supply media for this
+       finisher device.  The value of this object is a bit map in an
+       octet string with each position representing the value of a
+       prtMediaPathIndex.  For a media path that can be a source
+       for this finisher device subunit, the bit position equal
+       to one less than the value of prtMediaPathIndex will be set.
+       The bits are numbered starting with the most significant bit of
+       the first byte being bit 0, the least significant bit of the
+       first byte being bit 7, the most significant of the second byte
+       being bit 8, and so on."
+    ::= { finDeviceEntry 7 }
+
+finDeviceAssociatedOutputs OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..63))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "Indicates the printer output subunits this finisher device
+       subunit services.  The value of this object is a bit map in an
+
+       octet string with each position representing the value of a
+       prtOutputIndex.  For an output subunit that is serviced
+       by this finisher device subunit, the bit position equal
+       to one less than the value of prtOutputIndex will be set.
+       The bits are numbered starting with the most significant bit of
+       the first byte being bit 0, the least significant bit of the
+       first byte being bit 7, the most significant of the second byte
+       being bit 8, and so on."
+    ::= { finDeviceEntry 8 }
+
+finDeviceStatus OBJECT-TYPE
+    SYNTAX      PrtSubUnitStatusTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "Indicates the current status of this finisher device
+       subunit."
+    DEFVAL      { 5 }      -- unknown
+    ::= { finDeviceEntry 9 }
+
+finDeviceDescription OBJECT-TYPE
+    SYNTAX      PrtLocalizedDescriptionStringTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "A free form text description of this device subunit in the
+       localization specified by prtGeneralCurrentLocalization."
+    ::= { finDeviceEntry 10 }
+
+-- Finisher Supply Group (Mandatory)
+--
+-- A finisher device, but not all finisher devices, may have one or more
+-- supplies associated with it.  For example a finisher may use both
+-- binding tape and stitching wire supplies. A finisher may also have
+-- more than one source for a given type of supply e.g., multiple supply
+-- sources of ink for imprinters.
+
+finSupply  OBJECT IDENTIFIER  ::=  { printmib 31 }
+
+finSupplyTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FinSupplyEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "Each unique source of supply is an entry in the finisher
+       supply table. Each supply entry has its own
+       characteristics associated with it such as colorant and
+
+       current supply level."
+    ::= { finSupply 1 }
+
+finSupplyEntry OBJECT-TYPE
+    SYNTAX     FinSupplyEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "A list of finisher devices, with their associated
+       supplies and supplies characteristics."
+    INDEX  { hrDeviceIndex, finSupplyIndex }
+    ::= { finSupplyTable 1 }
+
+FinSupplyEntry ::= SEQUENCE {
+      finSupplyIndex               Integer32,
+      finSupplyDeviceIndex         Integer32,
+      finSupplyClass               PrtMarkerSuppliesClassTC,
+      finSupplyType                PrtMarkerSuppliesTypeTC,
+      finSupplyDescription         PrtLocalizedDescriptionStringTC,
+      finSupplyUnit                PrtMarkerSuppliesSupplyUnitTC,
+      finSupplyMaxCapacity         Integer32,
+      finSupplyCurrentLevel        Integer32,
+      finSupplyColorName           OCTET STRING
+     }
+
+finSupplyIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "A unique value used by a finisher to identify this supply
+       container/receptacle.  Although these values may change
+       due to a major reconfiguration of the finisher (e.g., the
+       addition of new supply sources to the finisher), values
+       are normally expected to remain stable across successive
+       power cycles."
+    ::= { finSupplyEntry 1 }
+
+finSupplyDeviceIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The value of finDeviceIndex corresponding to the finishing
+       device subunit with which this finisher supply is associated.
+       The value zero indicates the associated finishing device is
+       Unknown."
+    ::= { finSupplyEntry 2 }
+
+finSupplyClass OBJECT-TYPE
+    SYNTAX      PrtMarkerSuppliesClassTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "This value indicates whether this supply entity
+       represents a supply that is consumed or a container that
+       is filled."
+    ::= { finSupplyEntry 3 }
+
+finSupplyType OBJECT-TYPE
+    SYNTAX      PrtMarkerSuppliesTypeTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The type of this supply."
+    ::= { finSupplyEntry 4 }
+
+finSupplyDescription OBJECT-TYPE
+    SYNTAX      PrtLocalizedDescriptionStringTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The description of this supply/receptacle in text useful
+       for operators and management applications and in the
+       localization specified by prtGeneralCurrentLocalization."
+    ::= { finSupplyEntry 5 }
+
+finSupplyUnit OBJECT-TYPE
+    SYNTAX      PrtMarkerSuppliesSupplyUnitTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "Unit of measure of this finisher supply container or
+       receptacle."
+    ::= { finSupplyEntry 6 }
+
+finSupplyMaxCapacity OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The maximum capacity of this supply container/receptacle
+       expressed in Supply Units.  If this supply container/
+       receptacle can reliably sense this value, the value is
+       sensed  and is read-only; otherwise the value may be
+       written by a control panel or management application.  The
+       value (-1) means other and places no restrictions on this
+
+       parameter.  The value (-2) means unknown."
+    DEFVAL      { -2 }      -- unknown
+    ::= { finSupplyEntry 7 }
+
+finSupplyCurrentLevel OBJECT-TYPE
+    SYNTAX      Integer32 (-3..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The current level if this supply is a container; the
+       remaining space if this supply is a receptacle. If this
+       supply container/receptacle can reliably sense this value,
+       the value is sensed and is read-only; otherwise the value
+       may be written by a control panel or management
+       application.  The value (-1) means other and places no
+       restrictions on this parameter. The value (-2) means
+       unknown.  A value of (-3) means that the printer knows there
+       is some supply or remaining space."
+    DEFVAL      { -2 }      -- unknown
+    ::= { finSupplyEntry 8 }
+
+--             Capacity Attribute Relationships
+--
+--                 MEDIA INPUT MEASUREMENT
+--
+--     _______ |                   |
+--      |      |                   |
+--      |      |                   |                   |
+--      |      |_ _ _ _ _ _ _ _ _ _| ________________  |direction
+--      |      |                   |      |            v
+-- MaxCapacity |                   |      |
+--      |      | Sheets remaining  | CurrentLevel
+--      |      |                   |      |
+--      v      |                   |      v
+--     _______ +___________________+ _______
+
+finSupplyColorName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..63))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The name of the color associated with this supply."
+    REFERENCE
+       "The PWG Standardized Media Names specification [PWGMEDIA],
+        section 4 Media Color Names, contains the recommended values
+
+        for this object. Implementers may add additional string values.
+        The naming conventions in ISO 9070 are recommended in order to
+        avoid potential name clashes."
+    ::= { finSupplyEntry 9 }
+
+-- Finisher Supply, Media Input Group (Conditionally Mandatory)
+--
+-- A finisher device may have one or more associated supply media
+-- inputs.  Each entry in this table defines an input for a
+-- supply media type such as inserts, covers, etc.
+--
+-- This group is mandatory only if the printer system contains a
+-- finisher device that requires a media supply used exclusively by a
+-- finishing process.  Examples are inserts or covers that are not
+-- supplied by an input subunit that provides media to the marker.
+
+finSupplyMediaInput  OBJECT IDENTIFIER  ::=  { printmib 32 }
+
+finSupplyMediaInputTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FinSupplyMediaInputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "The input subunits associated with a finisher supply media
+       are each represented by an entry in this table."
+::= { finSupplyMediaInput 1 }
+
+finSupplyMediaInputEntry OBJECT-TYPE
+    SYNTAX     FinSupplyMediaInputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "A list of finisher supply media input subunit features and
+       characteristics."
+    INDEX  { hrDeviceIndex, finSupplyMediaInputIndex }
+    ::= { finSupplyMediaInputTable 1 }
+
+FinSupplyMediaInputEntry ::= SEQUENCE {
+      finSupplyMediaInputIndex            Integer32,
+      finSupplyMediaInputDeviceIndex      Integer32,
+      finSupplyMediaInputSupplyIndex      Integer32,
+      finSupplyMediaInputType             PrtInputTypeTC,
+      finSupplyMediaInputDimUnit          PrtMediaUnitTC,
+      finSupplyMediaInputMediaDimFeedDir  Integer32,
+      finSupplyMediaInputMediaDimXFeedDir Integer32,
+      finSupplyMediaInputStatus           PrtSubUnitStatusTC,
+      finSupplyMediaInputMediaName      OCTET STRING,
+      finSupplyMediaInputName           OCTET STRING,
+      finSupplyMediaInputDescription    PrtLocalizedDescriptionStringTC,
+      finSupplyMediaInputSecurity       PresentOnOff,
+      finSupplyMediaInputMediaWeight    Integer32,
+      finSupplyMediaInputMediaThickness Integer32,
+      finSupplyMediaInputMediaType      OCTET STRING
+     }
+
+finSupplyMediaInputIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "A unique value used by a finisher to identify this supply
+       media input subunit.  Although these values may change
+       due to a major reconfiguration of the finisher (e.g., the
+       addition of new supply media input sources to the
+       finisher), values are normally expected to remain stable
+       across successive power cycles."
+    ::= { finSupplyMediaInputEntry 1 }
+
+finSupplyMediaInputDeviceIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The value of finDeviceIndex corresponding to the finishing
+       device subunit with which this finisher media supply is
+       associated.  The value zero indicates the associated device
+       is unknown."
+    ::= { finSupplyMediaInputEntry 2 }
+
+finSupplyMediaInputSupplyIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The value of finSupplyIndex corresponding to the finishing
+       supply subunit with which this finisher media supply is
+       associated.  The value zero indicates the associated finishing
+       supply is unknown or there is no applicable finisher supply
+       table entry."
+    ::= { finSupplyMediaInputEntry 3 }
+
+finSupplyMediaInputType OBJECT-TYPE
+    SYNTAX      PrtInputTypeTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The type of technology (discriminated primarily according
+       to the feeder mechanism type) employed by the input
+       subunit."
+    ::= { finSupplyMediaInputEntry 4 }
+
+finSupplyMediaInputDimUnit OBJECT-TYPE
+    SYNTAX      PrtMediaUnitTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The unit of measure for specifying dimensional values for
+       this input device."
+    ::= { finSupplyMediaInputEntry 5 }
+
+finSupplyMediaInputMediaDimFeedDir OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "This object provides the value of the dimension in the
+       feed direction of the media that is placed or will be
+       placed in this input device.  Feed dimension measurements
+       are taken parallel to the feed direction of the device and
+       measured in finSupplyMediaInputDimUnits.  If this input
+       device can reliably sense this value, the value is sensed
+       and is read-only access. Otherwise the value is read-write
+       access and may be written by management or control panel
+       applications. The value (-1) means other and specifically
+       indicates that this device places no restrictions on this
+       parameter. The value (-2) indicates unknown. "
+    ::= { finSupplyMediaInputEntry 6 }
+
+finSupplyMediaInputMediaDimXFeedDir OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "This object provides the value of the dimension across the
+       feed direction of the media that is placed or will be
+       placed in this input device.  The cross feed direction is
+       ninety degrees relative to the feed direction on this
+       device and measured in finSupplyMediaInputDimUnits.  If
+       this input device can reliably sense this value, the value
+       is sensed and is read-only access. Otherwise the value is
+       read-write access and may be written by management or
+       control panel applications. The value (-1) means other and
+       specifically indicates that this device places no
+
+       restrictions on this parameter. The value (-2) indicates
+       unknown. "
+    ::= { finSupplyMediaInputEntry 7 }
+
+finSupplyMediaInputStatus OBJECT-TYPE
+    SYNTAX      PrtSubUnitStatusTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "This value indicates the current status of this input
+       device."
+    DEFVAL      { 5 }      -- unknown
+    ::= { finSupplyMediaInputEntry 8 }
+
+finSupplyMediaInputMediaName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..63))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The name of the current media contained in this input
+       device. Examples are Engineering Manual Cover, Section A Tab
+       Divider or any ISO standard names."
+    ::= { finSupplyMediaInputEntry 9 }
+
+finSupplyMediaInputName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..63))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The name assigned to this input subunit."
+    ::= { finSupplyMediaInputEntry 10 }
+
+finSupplyMediaInputDescription OBJECT-TYPE
+    SYNTAX      PrtLocalizedDescriptionStringTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "A free form text description of this input subunit in the
+       localization specified by prtGeneralCurrentLocalization."
+    ::= { finSupplyMediaInputEntry 11 }
+
+finSupplyMediaInputSecurity OBJECT-TYPE
+    SYNTAX      PresentOnOff
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "Indicates if this subunit has some security associated
+       with it."
+    ::= { finSupplyMediaInputEntry 12 }
+
+finSupplyMediaInputMediaWeight OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The weight of the media associated with this Input device
+       in grams per meter squared.  The value (-1) means other
+       and specifically indicates that the device places no
+       restriction on this parameter.  The value (-2) means
+       unknown.  This object can be used to calculate the weight
+       of individual pages processed by the document finisher.
+       This value, when multiplied by the number of pages in a
+       finished set, can be used to calculate the weight of a set
+       before it is inserted into a mailing envelope."
+    ::= { finSupplyMediaInputEntry 13 }
+
+finSupplyMediaInputMediaThickness OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "This object identifies the thickness of the input media
+       processed by this document input subunit measured in
+       micrometers.  This value may be used by devices (or
+       operators) to set up proper machine tolerances for the
+       feeder operation.  The value (-2) indicates that the media
+       thickness is unknown or not used in the setup for this
+       input subunit."
+    ::= { finSupplyMediaInputEntry 14 }
+
+finSupplyMediaInputMediaType OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..63))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The name of the type of medium associated with this input
+       subunit. "
+    REFERENCE
+       "The PWG Standardized Media Names specification [PWGMEDIA],
+        section 3 Media Type Names, contains the recommended values
+        for this object. Implementers may add additional string values.
+        The naming conventions in ISO 9070 are recommended in order to
+        avoid potential name clashes."
+    ::= { finSupplyMediaInputEntry 15 }
+
+-- Finisher Device Attribute Group (Mandatory)
+--
+-- A finisher device subunit may have one or more parameters that
+-- cannot be specified by any other objects in the MIB.  The
+-- Device Attribute group facilitates the definition of these
+-- parameters.  The objects which define the attributes are
+-- read-write, to allow both Set and Get operations.
+--
+-- At least one table entry must exist for each finisher device defined
+-- by the MIB.  If no other entry is possible for a finisher device, the
+-- deviceName(3) attribute MUST be returned.
+
+finDeviceAttribute  OBJECT IDENTIFIER  ::=  { printmib 33 }
+
+finDeviceAttributeTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FinDeviceAttributeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "The attribute table defines special parameters that are
+       applicable only to a minority of the finisher devices.
+       An attribute table entry is used, rather than unique
+       objects, to minimize the number of MIB objects and to
+       allow for expansion without the addition of MIB objects.
+       Each finisher device is represented by a separate row
+       in the device subunit attribute table."
+::= { finDeviceAttribute 1 }
+
+finDeviceAttributeEntry OBJECT-TYPE
+    SYNTAX     FinDeviceAttributeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+      "Each entry defines a finisher function parameter that
+       cannot be represented by an object in the finisher
+       device subunit table."
+    INDEX  { hrDeviceIndex, finDeviceIndex,
+             finDeviceAttributeTypeIndex,
+             finDeviceAttributeInstanceIndex }
+::= { finDeviceAttributeTable 1 }
+
+FinDeviceAttributeEntry ::= SEQUENCE {
+      finDeviceAttributeTypeIndex        FinAttributeTypeTC,
+      finDeviceAttributeInstanceIndex    Integer32,
+      finDeviceAttributeValueAsInteger   Integer32,
+      finDeviceAttributeValueAsOctets    OCTET STRING
+     }
+
+finDeviceAttributeTypeIndex OBJECT-TYPE
+    SYNTAX      FinAttributeTypeTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "Defines the attribute type represented by this row."
+    ::= { finDeviceAttributeEntry 1 }
+
+finDeviceAttributeInstanceIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "An index that allows the discrimination of an attribute
+       instance when the same attribute occurs multiple times for
+       a specific instance of a finisher function.  The value of
+       this index shall be 1 if only a single instance of the
+       attribute occurs for the specific finisher function.
+       Additional values shall be assigned in a contiguous manner."
+    ::= { finDeviceAttributeEntry 2 }
+
+finDeviceAttributeValueAsInteger OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "Defines the integer value of the attribute.  The value of
+       the attribute is represented as an integer if the
+       finAttributeTypeTC description for the attribute has the
+       tag 'INTEGER:'.
+
+       Depending upon the attribute enum definition, this object
+       may be either an integer, a counter, an index, or an enum.
+       Attributes for which the concept of an integer value is
+       not meaningful SHALL return a value of -1 for this
+       attribute."
+    DEFVAL      { -2 }      -- unknown
+    ::= { finDeviceAttributeEntry 3 }
+
+finDeviceAttributeValueAsOctets OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..63))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "Contains the octet string value of the attribute.  The
+       value of the attribute is represented as a string if the
+       finAttributeTypeTC description for the attribute has the
+       tag 'OCTETS:'.
+
+       Depending upon the attribute enum definition, this object
+       may be either a coded character set string (text) or a
+       binary octet string.  Attributes for which the concept of
+       an octet string value is not meaningful SHALL contain a
+       zero length string."
+    DEFVAL      { ''H }      -- empty string
+    ::= { finDeviceAttributeEntry 4 }
+
+-- Conformance Information
+
+-- compliance statements
+
+finMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for agents that implement the
+        finisher MIB."
+    MODULE -- this module
+    MANDATORY-GROUPS { finDeviceGroup, finSupplyGroup,
+                       finDeviceAttributeGroup }
+
+        OBJECT      finDevicePresentOnOff
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finDeviceMaxCapacity
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finDeviceCurrentCapacity
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMaxCapacity
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyCurrentLevel
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputMediaDimFeedDir
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputMediaDimXFeedDir
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputMediaName
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputName
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputSecurity
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputMediaWeight
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputMediaThickness
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finSupplyMediaInputMediaType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finDeviceAttributeValueAsInteger
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      finDeviceAttributeValueAsOctets
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        GROUP       finSupplyMediaInputGroup
+        DESCRIPTION
+            "This group is conditionally mandatory and must be included
+             if a finisher device requires a media supply that is used
+             exclusively by a finishing process."
+    ::= { prtMIBConformance 5 }
+
+finMIBGroups      OBJECT IDENTIFIER ::= { prtMIBConformance 6 }
+
+finDeviceGroup OBJECT-GROUP
+    OBJECTS { finDeviceType, finDevicePresentOnOff,
+              finDeviceCapacityUnit, finDeviceMaxCapacity,
+              finDeviceCurrentCapacity, finDeviceAssociatedMediaPaths,
+              finDeviceAssociatedOutputs, finDeviceStatus,
+              finDeviceDescription }
+    STATUS  current
+    DESCRIPTION
+        "The finisher device group."
+    ::= { finMIBGroups 1 }
+
+finSupplyGroup OBJECT-GROUP
+    OBJECTS { finSupplyDeviceIndex, finSupplyClass, finSupplyType,
+              finSupplyDescription, finSupplyUnit, finSupplyMaxCapacity,
+              finSupplyCurrentLevel, finSupplyColorName }
+    STATUS  current
+    DESCRIPTION
+        "The finisher supply group."
+    ::= { finMIBGroups 2 }
+
+finSupplyMediaInputGroup OBJECT-GROUP
+    OBJECTS { finSupplyMediaInputDeviceIndex,
+              finSupplyMediaInputSupplyIndex, finSupplyMediaInputType,
+              finSupplyMediaInputDimUnit,
+              finSupplyMediaInputMediaDimFeedDir,
+              finSupplyMediaInputMediaDimXFeedDir,
+              finSupplyMediaInputStatus, finSupplyMediaInputMediaName,
+              finSupplyMediaInputName, finSupplyMediaInputDescription,
+              finSupplyMediaInputSecurity,
+              finSupplyMediaInputMediaWeight,
+              finSupplyMediaInputMediaThickness,
+              finSupplyMediaInputMediaType }
+    STATUS  current
+    DESCRIPTION
+        "The finisher supply, media input group."
+    ::= { finMIBGroups 3 }
+
+finDeviceAttributeGroup OBJECT-GROUP
+    OBJECTS { finDeviceAttributeValueAsInteger,
+              finDeviceAttributeValueAsOctets }
+    STATUS  current
+    DESCRIPTION
+        "The finisher device attribute group.  This group is mandatory
+         for a finisher device that contains an inserter subunit."
+    ::= { finMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/GMPLS-LABEL-STD-MIB.mib b/snmp_builder/mibs/GMPLS-LABEL-STD-MIB.mib
new file mode 100644
index 0000000..0efe390
--- /dev/null
+++ b/snmp_builder/mibs/GMPLS-LABEL-STD-MIB.mib
@@ -0,0 +1,689 @@
+GMPLS-LABEL-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
+    FROM SNMPv2-SMI                                   -- RFC 2578
+  MODULE-COMPLIANCE, OBJECT-GROUP
+    FROM SNMPv2-CONF                                  -- RFC 2580
+  RowStatus, StorageType
+    FROM SNMPv2-TC                                    -- RFC 2579
+  InterfaceIndexOrZero
+    FROM IF-MIB                                       -- RFC 2863
+  IndexIntegerNextFree
+    FROM DIFFSERV-MIB                                 -- RFC 3289
+  MplsLabel, mplsStdMIB
+    FROM MPLS-TC-STD-MIB                              -- RFC 3811
+  GmplsLabelTypeTC, GmplsFreeformLabelTC
+    FROM GMPLS-TC-STD-MIB                             -- RFC 4801
+;
+
+gmplsLabelStdMIB MODULE-IDENTITY
+  LAST-UPDATED
+    "200702270000Z" -- 27 February 2007 00:00:00 GMT
+  ORGANIZATION
+    "IETF Common Control and Measurement Plane (CCAMP) Working Group"
+  CONTACT-INFO
+    "       Thomas D. Nadeau
+            Cisco Systems, Inc.
+     Email: tnadeau@cisco.com
+
+            Adrian Farrel
+            Old Dog Consulting
+     Email: adrian@olddog.co.uk
+
+     Comments about this document should be emailed directly to the
+     CCAMP working group mailing list at ccamp@ops.ietf.org."
+  DESCRIPTION
+    "Copyright (C) The IETF Trust (2007).  This version of
+     this MIB module is part of RFC 4803; see the RFC itself for
+     full legal notices.
+
+     This MIB module contains managed object definitions for labels
+     within GMPLS systems as defined in
+     Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+     Functional Description, Berger, L. (Editor), RFC 3471,
+     January 2003."
+  REVISION
+    "200702270000Z" -- 27 February 2007 00:00:00 GMT
+  DESCRIPTION
+    "Initial version issued as part of RFC 4803."
+  ::= { mplsStdMIB 16 }
+
+-- no notifications are currently defined.
+
+gmplsLabelObjects        OBJECT IDENTIFIER ::= { gmplsLabelStdMIB 1 }
+gmplsLabelConformance    OBJECT IDENTIFIER ::= { gmplsLabelStdMIB 2 }
+
+gmplsLabelIndexNext OBJECT-TYPE
+  SYNTAX        IndexIntegerNextFree
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "This object contains an unused value for gmplsLabelIndex,
+       or a zero to indicate that no unused value exists or is
+       available.
+
+       A management application wishing to create a row in the
+       gmplsLabelTable may read this object and then attempt to
+       create a row in the table.  If row creation fails (because
+       another application has already created a row with the
+       supplied index), the management application should read this
+       object again to get a new index value.
+
+       When a row is created in the gmplsLabelTable with the
+       gmplsLabelIndex value held by this object, an implementation
+       MUST change the value in this object."
+  ::= { gmplsLabelObjects 1 }
+
+gmplsLabelTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF GmplsLabelEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "Table of GMPLS Labels.  This table allows the representation
+     of the more complex label forms required for GMPLS that cannot
+     be held within the TEXTUAL-CONVENTION MplsLabel; that is, labels
+     that cannot be encoded within 32 bits.  It is, nevertheless, also
+     capable of holding 32-bit labels or regular MPLS Labels if
+     desired.
+
+     Each entry in this table represents an individual GMPLS Label
+     value.  The representation of Labels in tables in other MIB
+     modules may be achieved by a referrence to an entry in this
+     table by means of a row pointer into this table.  The indexing
+     of this table provides for arbitrary indexing and also for
+     concatenation of labels.
+
+     For an example of label concatenation, see RFC 3945, section 7.1.
+     In essence, a GMPLS Label may be composite in order to identify
+     a set of resources in the data plane.  Practical examples are
+     timeslots and wavelength sets (which are not contiguous like
+     wavebands).
+
+     The indexing mechanism allows multiple entries in this table to
+     be seen as a sequence of labels that should be concatenated.
+     Ordering is potentially very sensitive for concatenation."
+   REFERENCE
+     "1. Generalized Multiprotocol Label Switching (GMPLS)
+         Architecture, RFC 3945, section 7.1."
+::= { gmplsLabelObjects 2 }
+
+gmplsLabelEntry OBJECT-TYPE
+  SYNTAX        GmplsLabelEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "An entry in this table represents a single label value.  There
+     are three indexes into the table.
+
+     -  The interface index may be helpful to distinguish which
+        labels are in use on which interfaces or to handle cases
+        where there are a very large number of labels in use in the
+        system.  When label representation is desired to apply to the
+        whole system or when it is not important to distinguish
+        labels by their interfaces, this index MAY be set to zero.
+
+     -  The label index provides a way of identifying the label.
+
+     -  The label sub-index is only used for concatenated labels.  It
+        identifies each component label.  When non-concatenated labels
+        are used, this index SHOULD be set to zero.
+
+     A storage type object is supplied to control the storage type
+     for each entry, but implementations should note that the storage
+     type of conceptual rows in other tables that include row
+     pointers to an entry in this table SHOULD dictate the storage
+     type of the rows in this table where the row in the other table
+     is more persistent."
+  INDEX {
+    gmplsLabelInterface,
+    gmplsLabelIndex,
+    gmplsLabelSubindex }
+::= { gmplsLabelTable 1 }
+
+GmplsLabelEntry ::= SEQUENCE {
+  gmplsLabelInterface           InterfaceIndexOrZero,
+  gmplsLabelIndex               Unsigned32,
+  gmplsLabelSubindex            Unsigned32,
+  gmplsLabelType                GmplsLabelTypeTC,
+  gmplsLabelMplsLabel           MplsLabel,
+  gmplsLabelPortWavelength      Unsigned32,
+  gmplsLabelFreeform            GmplsFreeformLabelTC,
+  gmplsLabelSonetSdhSignalIndex Integer32,
+  gmplsLabelSdhVc               Integer32,
+  gmplsLabelSdhVcBranch         Integer32,
+  gmplsLabelSonetSdhBranch      Integer32,
+  gmplsLabelSonetSdhGroupBranch Integer32,
+  gmplsLabelWavebandId          Unsigned32,
+  gmplsLabelWavebandStart       Unsigned32,
+  gmplsLabelWavebandEnd         Unsigned32,
+  gmplsLabelStorageType         StorageType,
+  gmplsLabelRowStatus           RowStatus
+}
+
+gmplsLabelInterface OBJECT-TYPE
+  SYNTAX        InterfaceIndexOrZero
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "The interface on which this label is used.  If this object is set
+     to zero, the label MUST have applicability across the
+     whole system and not be limited to a single interface."
+::= { gmplsLabelEntry 1 }
+
+gmplsLabelIndex OBJECT-TYPE
+  SYNTAX        Unsigned32 (0..4294967295)
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "An arbitrary index into the table to identify a label.
+
+     Note that implementations that are representing 32-bit labels
+     within this table MAY choose to align this index with the value
+     of the label, and this may result in the use of the value zero
+     since it represents a valid label value.  Such implementation
+     should be aware of the implications of sparsely populated
+
+     tables.
+
+     A management application may read the gmplsLabelIndexNext
+     object to find a suitable value for this object."
+::= { gmplsLabelEntry 2 }
+
+gmplsLabelSubindex OBJECT-TYPE
+  SYNTAX        Unsigned32 (0..4294967295)
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "In conjunction with gmplsLabelInterface and gmplsLabelIndex,
+     this object uniquely identifies this row.  This sub-index allows
+     a single GMPLS Label to be defined as a concatenation of labels.
+     This is particularly useful in TDM.
+
+     The ordering of sub-labels is strict with the sub-label with
+     the lowest gmplsLabelSubindex appearing first.  Note that all
+     sub-labels of a single GMPLS Label must share the same
+     gmplsLabelInterface and gmplsLabelIndex values.  For labels that
+     are not composed of concatenated sub-labels, this value SHOULD
+     be set to zero."
+::= { gmplsLabelEntry 3 }
+
+gmplsLabelType OBJECT-TYPE
+  SYNTAX        GmplsLabelTypeTC
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "Identifies the type of this label.  Note that this object does
+     not determine whether MPLS or GMPLS signaling is in use: a value
+     of gmplsMplsLabel(1) denotes that an MPLS Packet Label is
+     present in the gmplsLabelMplsLabel object and encoded using the
+     MplsLabel TEXTUAL-CONVENTION (may be a 20-bit MPLS Label, a 10-
+     or 23-bit Frame Relay Label, or an Asynchronous Transfer Mode
+     (ATM) Label), but does not describe whether this is signaled
+     using MPLS or GMPLS.
+
+     The value of this object helps determine which of the following
+     objects are valid.  This object cannot be modified if
+     gmplsLabelRowStatus is active(1)."
+   REFERENCE
+     "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+         Functional Description, RFC 3471, section 3."
+::= { gmplsLabelEntry 4 }
+
+gmplsLabelMplsLabel OBJECT-TYPE
+  SYNTAX         MplsLabel
+  MAX-ACCESS     read-create
+  STATUS         current
+  DESCRIPTION
+    "The value of an MPLS Label (that is a Packet Label) if this
+     table is used to store it.  This may be used in MPLS systems even
+     though the label values can be adequately stored in the MPLS MIB
+     modules (MPLS-LSR-STD-MIB and MPLS-TE-STD-MIB).  Furthermore, in
+     mixed MPLS and GMPLS systems, it may be advantageous to store all
+     labels in a single label table.  Lastly, in GMPLS systems where
+     Packet Labels are used (that is in systems that use GMPLS
+     signaling and GMPLS Labels for packet switching), it may be
+     desirable to use this table.
+
+     This object is only valid if gmplsLabelType is set
+     to gmplsMplsLabel(1).  This object cannot be modified if
+     gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. MPLS Label Stack Encoding, RFC 3032."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 5 }
+
+gmplsLabelPortWavelength OBJECT-TYPE
+  SYNTAX        Unsigned32
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The value of a Port or Wavelength Label when carried as a
+     Generalized Label.  Only valid if gmplsLabelType is set to
+     gmplsPortWavelengthLabel(2).  This object cannot be modified if
+     gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.2.1.1."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 6 }
+
+gmplsLabelFreeform OBJECT-TYPE
+  SYNTAX        GmplsFreeformLabelTC
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The value of a Freeform Generalized Label that does not conform
+     to one of the standardized label encodings or that an
+     implementation chooses to represent as an octet string without
+     further decoding.  Only valid if gmplsLabelType is set to
+     gmplsFreeformLabel(3).  This object cannot be modified
+     if gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.2."
+  DEFVAL { '00'h }
+::= { gmplsLabelEntry 7 }
+
+gmplsLabelSonetSdhSignalIndex OBJECT-TYPE
+  SYNTAX        Integer32 (0..4095)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The Signal Index value (S) of a SONET or SDH Generalized Label.
+     Zero indicates that this field is non-significant.  Only valid if
+     gmplsLabelType is set to gmplsSonetLabel(4) or gmplsSdhLabel(5).
+     This object cannot be modified if gmplsLabelRowStatus is
+     active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Extensions
+        for Synchronous Optical Network (SONET) and Synchronous
+        Digital Hierarchy (SDH) Control, RFC 4606, section 3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 8 }
+
+gmplsLabelSdhVc OBJECT-TYPE
+  SYNTAX        Integer32 (0..15)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The VC Indicator (U) of an SDH Generalized Label.  Zero indicates
+     that this field is non-significant.  Only valid if gmplsLabelType
+     is set to gmplsSdhLabel(5).  This object cannot be modified if
+     gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Extensions
+        for Synchronous Optical Network (SONET) and Synchronous
+        Digital Hierarchy (SDH) Control, RFC 4606, section 3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 9 }
+
+gmplsLabelSdhVcBranch OBJECT-TYPE
+  SYNTAX        Integer32 (0..15)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The VC Branch Indicator (K) of an SDH Generalized Label.  Zero
+     indicates that this field is non-significant.  Only valid if
+     gmplsLabelType is set to gmplsSdhLabel(5).  This
+     object cannot be modified if gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Extensions
+        for Synchronous Optical Network (SONET) and Synchronous
+        Digital Hierarchy (SDH) Control, RFC 4606, section 3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 10 }
+
+gmplsLabelSonetSdhBranch OBJECT-TYPE
+  SYNTAX        Integer32 (0..15)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The Branch Indicator (L) of a SONET or SDH Generalized Label.
+     Zero indicates that this field is non-significant.  Only valid
+     gmplsLabelType is set to gmplsSonetLabel(4) or
+     gmplsSdhLabel(5).  This object cannot be modified if
+     gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Extensions
+        for Synchronous Optical Network (SONET) and Synchronous
+        Digital Hierarchy (SDH) Control, RFC 4606, section 3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 11 }
+
+gmplsLabelSonetSdhGroupBranch OBJECT-TYPE
+  SYNTAX        Integer32 (0..15)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The Group Branch Indicator (M) of a SONET or SDH Generalized
+     Label.  Zero indicates that this field is non-significant.
+     Only valid if gmplsLabelType is set to gmplsSonetLabel(4) or
+     gmplsSdhLabel(5).  This object cannot be modified if
+     gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Extensions
+        for Synchronous Optical Network (SONET) and Synchronous
+        Digital Hierarchy (SDH) Control, RFC 4606, section 3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 12 }
+
+gmplsLabelWavebandId OBJECT-TYPE
+  SYNTAX        Unsigned32
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The waveband identifier component of a Waveband Label.  Only
+     valid if gmplsLabelType is set to gmplsWavebandLabel(6).  This
+     object cannot be modified if gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 13 }
+
+gmplsLabelWavebandStart OBJECT-TYPE
+  SYNTAX        Unsigned32
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The starting label component of a Waveband Label.  Only valid if
+     gmplsLabelType is set to gmplsWavebandLabel(6).  This object
+     cannot be modified if gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 14 }
+
+gmplsLabelWavebandEnd OBJECT-TYPE
+  SYNTAX        Unsigned32
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "The end label component of a Waveband Label.  Only valid if
+     gmplsLabelType is set to gmplsWavebandLabel(6).  This object
+     cannot be modified if gmplsLabelRowStatus is active(1)."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.3."
+  DEFVAL { 0 }
+::= { gmplsLabelEntry 15 }
+
+gmplsLabelStorageType OBJECT-TYPE
+  SYNTAX        StorageType
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "This variable indicates the storage type for this row.  The
+     agent MUST ensure that this object's value remains consistent
+     with the storage type of any rows in other tables that contain
+     pointers to this row.  In particular, the storage type of this
+     row must be at least as permanent as that of any row that points
+     to it.
+     Conceptual rows having the value 'permanent' need not
+     allow write-access to any columnar objects in the row."
+  REFERENCE
+    "1. Textual Conventions for SMIv2, STD 58, RFC 2579, section 2."
+  DEFVAL { volatile }
+::= { gmplsLabelEntry 16 }
+
+gmplsLabelRowStatus OBJECT-TYPE
+  SYNTAX        RowStatus
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "This variable is used to create, modify, and/or delete a row in
+     this table.  When a row in this table has a row in the active(1)
+     state, no objects in this row can be modified except the
+     gmplsLabelRowStatus and gmplsLabelStorageType.
+
+     The gmplsLabelType object does not have a default and must be
+     set before a row can become active.  The corresponding label
+     objects (dependent on the value of gmplsLabelType) should also
+     be set unless they happen to need to use the specified default
+     values as follows:
+
+     gmplsLabelType setting             objects to be set
+     --------------------------------------------------------------
+     gmplsMplsLabel(1)                  gmplsLabelMplsLabel
+
+     gmplsPortWavelengthLabel(2)        gmplsLabelPortWavelength
+
+     gmplsFreeformLabel(3)              gmplsLabelFreeform
+
+     gmplsSonetLabel(4)                 gmplsLabelSonetSdhSignalIndex
+                                        gmplsLabelSdhVc
+                                        gmplsLabelSdhVcBranch
+                                        gmplsLabelSonetSdhBranch
+                                        gmplsLabelSonetSdhGroupBranch
+
+     gmplsSdhLabel(5)                   gmplsLabelSonetSdhSignalIndex
+                                        gmplsLabelSdhVc
+                                        gmplsLabelSdhVcBranch
+                                        gmplsLabelSonetSdhBranch
+                                        gmplsLabelSonetSdhGroupBranch
+
+     gmplsWavebandLabel(6)              gmplsLabelWavebandId
+                                        gmplsLabelWavebandStart
+                                        gmplsLabelWavebandEnd"
+::= { gmplsLabelEntry 17 }
+
+gmplsLabelGroups
+  OBJECT IDENTIFIER ::= { gmplsLabelConformance 1 }
+
+gmplsLabelCompliances
+  OBJECT IDENTIFIER ::= { gmplsLabelConformance 2 }
+
+gmplsLabelModuleReadOnlyCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "Compliance requirement for implementations that only provide
+     read-only support for GMPLS-LABEL-STD-MIB.  Such devices can then
+     be monitored but cannot be configured using this MIB module."
+
+  MODULE -- this module
+
+  -- The mandatory groups have to be implemented by LSRs claiming
+  -- support for this MIB module.  This MIB module is, however, not
+  -- mandatory for a working implementation of a GMPLS LSR with full
+  -- MIB support if the GMPLS Labels in use can be represented within
+  -- a 32-bit quantity.
+
+  MANDATORY-GROUPS {
+    gmplsLabelTableGroup
+  }
+
+  GROUP gmplsLabelPacketGroup
+  DESCRIPTION
+    "This group extends gmplsLabelTableGroup for implementations that
+     support Packet Labels.  It is optional for implementations that
+     do not support Packet Labels."
+
+  GROUP gmplsLabelPortWavelengthGroup
+  DESCRIPTION
+    "This group extends gmplsLabelTableGroup for implementations that
+     support Port and Wavelength Labels.  It is optional for
+     implementations that do not support Wavelength Labels."
+
+  GROUP gmplsLabelFreeformGroup
+  DESCRIPTION
+    "This group extends gmplsLabelTableGroup for implementations that
+     support Freeform Labels.  It is optional for implementations that
+     do not support Freeform Labels."
+
+  GROUP gmplsLabelSonetSdhGroup
+  DESCRIPTION
+    "This group extends gmplsLabelTableGroup for implementations that
+     support SONET or SDH Labels.  It is optional for implementations
+     that do not support SONET or SDH Labels."
+
+  GROUP gmplsLabelWavebandGroup
+  DESCRIPTION
+    "This group extends gmplsLabelTableGroup for implementations that
+     support Waveband Labels.  It is optional for implementations that
+     do not support Waveband Labels."
+  OBJECT      gmplsLabelType
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelMplsLabel
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelPortWavelength
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelFreeform
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelSonetSdhSignalIndex
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelSdhVc
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelSdhVcBranch
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelSonetSdhBranch
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelSonetSdhGroupBranch
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelWavebandId
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+  OBJECT      gmplsLabelWavebandStart
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelWavebandEnd
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsLabelStorageType
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT       gmplsLabelRowStatus
+  SYNTAX       RowStatus { active(1) }
+  MIN-ACCESS   read-only
+  DESCRIPTION
+    "Write access is not required, and active(1) is
+     the only status that needs to be supported."
+::= { gmplsLabelCompliances 1 }
+
+gmplsLabelModuleFullCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "Compliance statement for agents that support the complete
+     GMPLS-LABEL-STD-MIB module.
+
+     The mandatory groups have to be implemented by GMPLS LSRs
+     claiming support for this MIB module.  This MIB module is,
+     however, not mandatory for a working implementation of a GMPLS
+     LSR with full MIB support if the GMPLS Labels in use can be
+     represented within a 32-bit quantity."
+
+  MODULE -- this module
+
+  MANDATORY-GROUPS {
+    gmplsLabelTableGroup
+  }
+::= { gmplsLabelCompliances 2 }
+
+gmplsLabelTableGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsLabelIndexNext,
+    gmplsLabelType,
+    gmplsLabelStorageType,
+    gmplsLabelRowStatus
+  }
+  STATUS  current
+  DESCRIPTION
+    "Necessary, but not sufficient, set of objects to implement label
+     table support.  In addition, depending on the type of labels
+     supported, the following other groups defined below are
+     mandatory:
+
+       gmplsLabelWavebandGroup and/or
+       gmplsLabelPacketGroup and/or
+       gmplsLabelPortWavelengthGroup and/or
+       gmplsLabelFreeformGroup and/or
+       gmplsLabelSonetSdhGroup."
+::= { gmplsLabelGroups 1 }
+
+gmplsLabelPacketGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsLabelMplsLabel
+  }
+  STATUS  current
+  DESCRIPTION
+    "Object needed to implement Packet (MPLS) Labels."
+::= { gmplsLabelGroups 2 }
+
+gmplsLabelPortWavelengthGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsLabelPortWavelength
+  }
+  STATUS  current
+  DESCRIPTION
+    "Object needed to implement Port and Wavelength Labels."
+::= { gmplsLabelGroups 3 }
+
+gmplsLabelFreeformGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsLabelFreeform
+  }
+  STATUS  current
+  DESCRIPTION
+    "Object needed to implement Freeform Labels."
+::= { gmplsLabelGroups 4 }
+
+gmplsLabelSonetSdhGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsLabelSonetSdhSignalIndex,
+    gmplsLabelSdhVc,
+    gmplsLabelSdhVcBranch,
+    gmplsLabelSonetSdhBranch,
+    gmplsLabelSonetSdhGroupBranch
+  }
+  STATUS  current
+  DESCRIPTION
+    "Objects needed to implement SONET and SDH Labels."
+::= { gmplsLabelGroups 5 }
+
+gmplsLabelWavebandGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsLabelWavebandId,
+    gmplsLabelWavebandStart,
+    gmplsLabelWavebandEnd
+  }
+  STATUS  current
+  DESCRIPTION
+    "Objects needed to implement Waveband Labels."
+::= { gmplsLabelGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/GMPLS-LSR-STD-MIB.mib b/snmp_builder/mibs/GMPLS-LSR-STD-MIB.mib
new file mode 100644
index 0000000..29704ae
--- /dev/null
+++ b/snmp_builder/mibs/GMPLS-LSR-STD-MIB.mib
@@ -0,0 +1,503 @@
+GMPLS-LSR-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, zeroDotZero
+    FROM SNMPv2-SMI                                   -- RFC 2578
+  MODULE-COMPLIANCE, OBJECT-GROUP
+    FROM SNMPv2-CONF                                  -- RFC 2580
+  RowPointer
+    FROM SNMPv2-TC                                    -- RFC 2579
+  GmplsSegmentDirectionTC
+    FROM GMPLS-TC-STD-MIB                             -- RFC 4801
+  mplsInterfaceIndex, mplsInSegmentIndex, mplsOutSegmentIndex,
+  mplsInterfaceGroup, mplsInSegmentGroup, mplsOutSegmentGroup,
+  mplsXCGroup, mplsPerfGroup, mplsLsrNotificationGroup
+    FROM MPLS-LSR-STD-MIB                             -- RFC 3813
+  ifGeneralInformationGroup, ifCounterDiscontinuityGroup
+    FROM IF-MIB                                       -- RFC 2863
+  mplsStdMIB
+    FROM MPLS-TC-STD-MIB                              -- RFC 3811
+;
+
+gmplsLsrStdMIB MODULE-IDENTITY
+  LAST-UPDATED
+    "200702270000Z" -- 27 February 2007 00:00:00 GMT
+  ORGANIZATION
+    "IETF Common Control And Measurement Plane (CCAMP) Working Group"
+  CONTACT-INFO
+    "       Thomas D. Nadeau
+            Cisco Systems, Inc.
+     Email: tnadeau@cisco.com
+            Adrian Farrel
+            Old Dog Consulting
+
+     Email: adrian@olddog.co.uk
+     Comments about this document should be emailed directly to the
+     CCAMP working group mailing list at ccamp@ops.ietf.org."
+  DESCRIPTION
+    "Copyright (C) The IETF Trust (2007).  This version of
+     this MIB module is part of RFC 4803; see the RFC itself for
+     full legal notices.
+
+     This MIB module contains managed object definitions for the
+     Generalized Multiprotocol (GMPLS) Label Switching Router as
+     defined in Generalized Multi-Protocol Label Switching (GMPLS)
+     Architecture, Mannie et al., RFC 3945, October 2004."
+  REVISION
+    "200702270000Z" -- 27 February 2007 00:00:00 GMT
+  DESCRIPTION
+    "Initial version issued as part of RFC 4803."
+  ::= { mplsStdMIB 15 }
+
+-- no notifications are currently defined.
+gmplsLsrObjects       OBJECT IDENTIFIER ::= { gmplsLsrStdMIB 1 }
+gmplsLsrConformance   OBJECT IDENTIFIER ::= { gmplsLsrStdMIB 2 }
+
+gmplsInterfaceTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF GmplsInterfaceEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "This table specifies per-interface GMPLS capability and
+     associated information.  It extends the information in the
+     mplsInterfaceTable of MPLS-LSR-STD-MIB through a
+     sparse augmentation relationship."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+  ::= { gmplsLsrObjects 1 }
+
+gmplsInterfaceEntry OBJECT-TYPE
+  SYNTAX        GmplsInterfaceEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "A conceptual row in this table is created automatically by an
+     LSR for each interface that is both capable of supporting
+     GMPLS and configured to support GMPLS.  Note that
+     support of GMPLS is not limited to control plane signaling,
+     but may include data-plane-only function configured through
+     SNMP SET commands performed on this MIB module.
+
+     A conceptual row in this table may also be created via SNMP
+     SET commands or automatically by the LSR to supplement a
+     conceptual row in the mplsInterfaceTable where the interface
+     is not capable of GMPLS but where the other objects carried
+     in this row provide useful additional information for an
+     MPLS interface.
+
+     A conceptual row in this table will exist if and only if a
+     corresponding entry in the mplsInterfaceTable exists, and a
+     corresponding entry in the ifTable exists with ifType = mpls(166).
+     If the associated entry in the ifTable is operationally disabled
+     (thus removing the GMPLS capabilities on the interface) or the
+     entry in the mplsInterfaceTable is deleted, the corresponding entry
+     in this table MUST be deleted shortly thereafter.
+
+     The indexes are the same as for the mplsInterfaceTable.  Thus, the
+     entry with index 0 represents the per-platform label space and
+     contains parameters that apply to all interfaces that
+     participate in the per-platform label space."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+  INDEX { mplsInterfaceIndex }
+::= { gmplsInterfaceTable 1 }
+
+GmplsInterfaceEntry ::= SEQUENCE {
+  gmplsInterfaceSignalingCaps      BITS,
+  gmplsInterfaceRsvpHelloPeriod    Unsigned32
+}
+
+gmplsInterfaceSignalingCaps OBJECT-TYPE
+  SYNTAX  BITS {
+    unknown(0),
+    rsvpGmpls(1),
+    crldpGmpls(2), -- note the use of CR-LDP is deprecated
+    otherGmpls(3)
+  }
+  MAX-ACCESS   read-create
+  STATUS       current
+  DESCRIPTION
+    "Defines the signaling capabilities on this interface.  Multiple
+     bits may legitimately be set at once, but if 'unknown' is set
+     then no other bit may be set.  Setting no bits implies that GMPLS
+     signaling cannot be performed on this interface and all LSPs
+     must be manually provisioned or that this table entry is only
+     present to supplement an entry in the mplsInterfaceTable by
+     providing the information carried in other objects in this row."
+  REFERENCE
+    "1. Generalized MPLS Signaling - CR-LDP Extensions, RFC 3472.
+     2. The Multiprotocol Label Switching (MPLS) Working Group
+        decision on MPLS signaling protocols, RFC 3468.
+     3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473."
+  DEFVAL { { rsvpGmpls } }
+::= { gmplsInterfaceEntry 1 }
+
+gmplsInterfaceRsvpHelloPeriod OBJECT-TYPE
+  SYNTAX       Unsigned32
+  UNITS        "milliseconds"
+  MAX-ACCESS   read-create
+  STATUS       current
+  DESCRIPTION
+    "Period, in milliseconds, between sending Resource Reservation
+     Protocol (RSVP) Hello messages on this interface.  A value of 0
+     indicates that no Hello messages should be sent on this
+     interface.
+
+     This object is only valid if gmplsInterfaceSignalingCaps has no
+     bits set or includes the rsvpGmpls bit."
+  REFERENCE
+    "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
+        section 5.
+     2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 9.3."
+  DEFVAL { 3000 }
+::= { gmplsInterfaceEntry 2 }
+
+gmplsInSegmentTable  OBJECT-TYPE
+  SYNTAX        SEQUENCE OF GmplsInSegmentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "This table sparse augments the mplsInSegmentTable of
+     MPLS-LSR-STD-MIB to provide GMPLS-specific information about
+     incoming segments to an LSR."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+::= { gmplsLsrObjects 2 }
+
+gmplsInSegmentEntry  OBJECT-TYPE
+  SYNTAX        GmplsInSegmentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "An entry in this table extends the representation of an incoming
+     segment represented by an entry in the mplsInSegmentTable in
+
+     MPLS-LSR-STD-MIB through a sparse augmentation.  An entry can be
+     created by a network administrator via SNMP SET commands, or in
+     response to signaling protocol events.
+
+     Note that the storage type for this entry is given by the value
+     of mplsInSegmentStorageType in the corresponding entry of the
+     mplsInSegmentTable."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+  INDEX { mplsInSegmentIndex }
+::= { gmplsInSegmentTable 1 }
+
+GmplsInSegmentEntry ::= SEQUENCE {
+  gmplsInSegmentDirection        GmplsSegmentDirectionTC,
+  gmplsInSegmentExtraParamsPtr   RowPointer
+}
+
+gmplsInSegmentDirection OBJECT-TYPE
+  SYNTAX        GmplsSegmentDirectionTC
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "This object indicates the direction of data flow on this
+     segment.  This object cannot be modified if
+     mplsInSegmentRowStatus for the corresponding entry in the
+     mplsInSegmentTable is active(1)."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+  DEFVAL        { forward }
+::= { gmplsInSegmentEntry 1 }
+
+gmplsInSegmentExtraParamsPtr  OBJECT-TYPE
+  SYNTAX       RowPointer
+  MAX-ACCESS   read-create
+  STATUS       current
+  DESCRIPTION
+    "Some tunnels will run over transports that can usefully support
+     technology-specific additional parameters (for example,
+     Synchronous Optical Network (SONET) resource usage).  Such can be
+     supplied from an external table and referenced from here.  A value
+     of zeroDotZero in this attribute indicates that there is no such
+     additional information."
+  DEFVAL      { zeroDotZero }
+  ::= { gmplsInSegmentEntry 2 }
+
+gmplsOutSegmentTable  OBJECT-TYPE
+  SYNTAX        SEQUENCE OF GmplsOutSegmentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "This table sparse augments the mplsOutSegmentTable of
+     MPLS-LSR-STD-MIB to provide GMPLS-specific information about
+     outgoing segments from an LSR."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+::= { gmplsLsrObjects 3 }
+
+gmplsOutSegmentEntry  OBJECT-TYPE
+  SYNTAX        GmplsOutSegmentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+    "An entry in this table extends the representation of an outgoing
+     segment represented by an entry in the mplsOutSegmentTable of
+     MPLS-LSR-STD-MIB through a sparse augmentation.  An entry can be
+     created by a network administrator via SNMP SET commands, or in
+     response to signaling protocol events.
+
+     Note that the storage type for this entry is given by the value
+     of mplsOutSegmentStorageType in the corresponding entry of the
+     mplsOutSegmentTable."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+  INDEX  { mplsOutSegmentIndex }
+::= { gmplsOutSegmentTable 1 }
+
+GmplsOutSegmentEntry ::= SEQUENCE {
+  gmplsOutSegmentDirection       GmplsSegmentDirectionTC,
+  gmplsOutSegmentTTLDecrement    Unsigned32,
+  gmplsOutSegmentExtraParamsPtr  RowPointer
+}
+
+gmplsOutSegmentDirection OBJECT-TYPE
+  SYNTAX        GmplsSegmentDirectionTC
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "This object indicates the direction of data flow on this
+     segment.  This object cannot be modified if
+     mplsOutSegmentRowStatus for the corresponding entry in the
+     mplsOutSegmentTable is active(1)."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information Base (MIB), RFC 3813."
+  DEFVAL  { forward }
+::= { gmplsOutSegmentEntry 1 }
+
+gmplsOutSegmentTTLDecrement OBJECT-TYPE
+  SYNTAX        Unsigned32
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+    "This object indicates the amount by which to decrement the Time
+     to Live (TTL) of any payload packets forwarded on this segment if
+     per-hop decrementing is being done.
+
+     A value of zero indicates that no decrement should be made or
+     that per-hop decrementing is not in use.
+
+     See the gmplsTunnelTTLDecrement object in the gmplsTunnelTable
+     of GMPLS-TE-STD-MIB for a value by which to decrement the TTL
+     for the whole of a tunnel.
+
+     This object cannot be modified if mplsOutSegmentRowStatus for
+     the associated entry in the mplsOutSegmentTable is active(1)."
+  REFERENCE
+    "1. Time To Live (TTL) Processing in Multi-Protocol Label
+        Switching (MPLS) Networks, RFC 3443.
+     2. Generalized Multiprotocol Label Switching (GMPLS) Traffic
+        Engineering Management Information Base, RFC 4802."
+  DEFVAL  { 0 }
+::= { gmplsOutSegmentEntry 2 }
+
+gmplsOutSegmentExtraParamsPtr  OBJECT-TYPE
+  SYNTAX       RowPointer
+  MAX-ACCESS   read-create
+  STATUS       current
+  DESCRIPTION
+    "Some tunnels will run over transports that can usefully support
+     technology-specific additional parameters (for example, SONET
+     resource usage).  Such can be supplied from an external table and
+     referenced from here.
+
+     A value of zeroDotZero in this attribute indicates that there is
+     no such additional information."
+  DEFVAL      { zeroDotZero }
+  ::= { gmplsOutSegmentEntry 3 }
+
+gmplsLsrGroups
+  OBJECT IDENTIFIER ::= { gmplsLsrConformance 1 }
+
+gmplsLsrCompliances
+  OBJECT IDENTIFIER ::= { gmplsLsrConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+
+gmplsLsrModuleFullCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "Compliance statement for agents that provide full support for
+     GMPLS-LSR-STD-MIB.
+
+     The mandatory group has to be implemented by all LSRs that
+     originate, terminate, or act as transit for TE-LSPs/tunnels.
+     In addition, depending on the type of tunnels supported, other
+     groups become mandatory as explained below."
+
+  MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
+
+  MANDATORY-GROUPS {
+    ifGeneralInformationGroup,
+    ifCounterDiscontinuityGroup
+  }
+
+  MODULE MPLS-LSR-STD-MIB -- The MPLS-LSR-STD-MIB, RFC3813
+
+  MANDATORY-GROUPS {
+    mplsInterfaceGroup,
+    mplsInSegmentGroup,
+    mplsOutSegmentGroup,
+    mplsXCGroup,
+    mplsPerfGroup,
+    mplsLsrNotificationGroup
+  }
+
+  MODULE -- this module
+
+  MANDATORY-GROUPS    {
+    gmplsInterfaceGroup,
+    gmplsInSegmentGroup,
+    gmplsOutSegmentGroup
+  }
+
+  OBJECT      gmplsInSegmentDirection
+  SYNTAX      GmplsSegmentDirectionTC
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "The only valid value for unidirectional LSPs is forward(1)."
+
+  OBJECT      gmplsOutSegmentDirection
+  SYNTAX      GmplsSegmentDirectionTC
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "The only valid value for unidirectional LSPs is forward(1)."
+
+  OBJECT      gmplsOutSegmentTTLDecrement
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsInSegmentExtraParamsPtr
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+  OBJECT      gmplsOutSegmentExtraParamsPtr
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+::= { gmplsLsrCompliances 1 }
+
+-- Compliance requirement for implementations that provide read-only
+-- access.
+
+gmplsLsrModuleReadOnlyCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "Compliance requirement for implementations that only provide
+     read-only support for GMPLS-LSR-STD-MIB.  Such devices can then
+     be monitored but cannot be configured using this MIB module."
+
+  MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
+
+  MANDATORY-GROUPS {
+    ifGeneralInformationGroup,
+    ifCounterDiscontinuityGroup
+  }
+
+  MODULE MPLS-LSR-STD-MIB
+
+  MANDATORY-GROUPS {
+    mplsInterfaceGroup,
+    mplsInSegmentGroup,
+    mplsOutSegmentGroup,
+    mplsXCGroup,
+    mplsPerfGroup
+  }
+
+  MODULE -- this module
+
+  MANDATORY-GROUPS {
+    gmplsInterfaceGroup,
+    gmplsInSegmentGroup,
+    gmplsOutSegmentGroup
+  }
+
+  OBJECT      gmplsInterfaceSignalingCaps
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsInterfaceRsvpHelloPeriod
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsInSegmentDirection
+  SYNTAX      GmplsSegmentDirectionTC
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "The only valid value for unidirectional LSPs is forward(1)."
+
+  OBJECT      gmplsInSegmentExtraParamsPtr
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+  OBJECT      gmplsOutSegmentDirection
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "The only valid value for unidirectional LSPs is forward(1)."
+
+  OBJECT      gmplsOutSegmentTTLDecrement
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+  OBJECT      gmplsOutSegmentExtraParamsPtr
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+::= { gmplsLsrCompliances 2 }
+
+gmplsInterfaceGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsInterfaceSignalingCaps,
+    gmplsInterfaceRsvpHelloPeriod
+  }
+  STATUS  current
+  DESCRIPTION
+   "Collection of objects that provide additional
+    information for an MPLS interface and are needed
+    for GMPLS interface configuration and performance
+    information."
+::= { gmplsLsrGroups 1 }
+
+gmplsInSegmentGroup  OBJECT-GROUP
+  OBJECTS {
+    gmplsInSegmentDirection,
+    gmplsInSegmentExtraParamsPtr
+  }
+  STATUS  current
+  DESCRIPTION
+    "Collection of objects that provide additional
+     information for an MPLS in-segment and are needed
+     for GMPLS in-segment configuration and performance
+     information."
+::= { gmplsLsrGroups 2 }
+
+gmplsOutSegmentGroup  OBJECT-GROUP
+  OBJECTS {
+    gmplsOutSegmentDirection,
+    gmplsOutSegmentTTLDecrement,
+    gmplsOutSegmentExtraParamsPtr
+  }
+  STATUS  current
+  DESCRIPTION
+    "Collection of objects that provide additional
+     information for an MPLS out-segment and are needed
+     for GMPLS out-segment configuration and performance
+     information."
+::= { gmplsLsrGroups 3 }
+END
diff --git a/snmp_builder/mibs/GMPLS-TC-STD-MIB.mib b/snmp_builder/mibs/GMPLS-TC-STD-MIB.mib
new file mode 100644
index 0000000..05242af
--- /dev/null
+++ b/snmp_builder/mibs/GMPLS-TC-STD-MIB.mib
@@ -0,0 +1,124 @@
+GMPLS-TC-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY
+    FROM SNMPv2-SMI                                    -- RFC 2578
+  TEXTUAL-CONVENTION
+    FROM SNMPv2-TC                                     -- RFC 2579
+  mplsStdMIB
+    FROM MPLS-TC-STD-MIB                               -- RFC 3811
+;
+
+gmplsTCStdMIB MODULE-IDENTITY
+  LAST-UPDATED
+    "200702280000Z" -- 28 February 2007 00:00:00 GMT
+  ORGANIZATION
+    "IETF Common Control and Measurement Plane (CCAMP) Working Group"
+  CONTACT-INFO
+    "       Thomas D. Nadeau
+            Cisco Systems, Inc.
+     Email: tnadeau@cisco.com
+
+            Adrian Farrel
+            Old Dog Consulting
+     Email: adrian@olddog.co.uk
+
+     Comments about this document should be emailed directly to the
+     CCAMP working group mailing list at ccamp@ops.ietf.org"
+  DESCRIPTION
+    "Copyright (C) The IETF Trust (2007).  This version of
+     this MIB module is part of RFC 4801; see the RFC itself for
+     full legal notices.
+
+     This MIB module defines TEXTUAL-CONVENTIONs for concepts used in
+     Generalized Multiprotocol Label Switching (GMPLS) networks."
+  REVISION
+     "200702280000Z" -- 28 February 2007 00:00:00 GMT
+  DESCRIPTION
+    "Initial version published as part of RFC 4801."
+::= { mplsStdMIB 12 }
+
+GmplsFreeformLabelTC ::= TEXTUAL-CONVENTION
+  STATUS      current
+  DESCRIPTION
+    "This TEXTUAL-CONVENTION can be used as the syntax of an object
+     that contains any GMPLS Label.  Objects with this syntax can be
+     used to represent labels that have label types that are not
+     defined in any RFCs.  The freeform GMPLS Label may also be used
+     by systems that do not wish to represent labels that have
+     label types defined in RFCs using type-specific syntaxes."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.2."
+  SYNTAX OCTET STRING (SIZE (0..64))
+
+GmplsLabelTypeTC ::= TEXTUAL-CONVENTION
+  STATUS      current
+  DESCRIPTION
+    "Determines the interpretation that should be applied to an
+     object that encodes a label.  The possible types are:
+
+     gmplsMplsLabel(1)           - The label is an MPLS Packet, Cell,
+                                   or Frame Label and is encoded as
+                                   described for the TEXTUAL-
+                                   CONVENTION MplsLabel defined in
+                                   RFC 3811.
+
+     gmplsPortWavelengthLabel(2) - The label is a Port or Wavelength
+                                   Label as defined in RFC 3471.
+
+     gmplsFreeformLabel(3)       - The label is any form of label
+                                   encoded as an OCTET STRING using
+                                   the TEXTUAL-CONVENTION
+                                   GmplsFreeformLabel.
+
+     gmplsSonetLabel(4)          - The label is a Synchronous Optical
+                                   Network (SONET) Label as
+                                   defined in RFC 4606.
+
+     gmplsSdhLabel(5)            - The label is a Synchronous Digital
+                                   Hierarchy (SDH) Label as defined
+                                   in RFC 4606.
+
+     gmplsWavebandLabel(6)       - The label is a Waveband Label as
+                                   defined in RFC 3471."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 3.
+     2. Definition of Textual Conventions and for Multiprotocol Label
+        Switching (MPLS) Management, RFC 3811, section 3.
+     3. Generalized Multi-Protocol Label Switching (GMPLS) Extensions
+        for Synchronous Optical Network (SONET) and Synchronous
+
+        Digital Hierarchy (SDH) Control, RFC 4606."
+   SYNTAX INTEGER {
+     gmplsMplsLabel(1),
+     gmplsPortWavelengthLabel(2),
+     gmplsFreeformGeneralizedLabel(3),
+     gmplsSonetLabel(4),
+     gmplsSdhLabel(5),
+     gmplsWavebandLabel(6)
+   }
+
+GmplsSegmentDirectionTC ::= TEXTUAL-CONVENTION
+  STATUS      current
+  DESCRIPTION
+    "The direction of data flow on an Label Switched Path (LSP)
+     segment with respect to the head of the LSP.
+
+     Where an LSP is signaled using a conventional signaling
+     protocol, the 'head' of the LSP is the source of the signaling
+     (also known as the ingress) and the 'tail' is the destination
+     (also known as the egress).  For unidirectional LSPs, this
+     usually matches the direction of flow of data.
+
+     For manually configured unidirectional LSPs, the direction of
+     the LSP segment matches the direction of flow of data.  For
+     manually configured bidirectional LSPs, an arbitrary decision
+     must be made about which LER is the 'head'."
+  SYNTAX  INTEGER {
+    forward(1),   -- data flows from head-end of LSP toward tail-end
+    reverse(2)    -- data flows from tail-end of LSP toward head-end
+  }
+
+END
diff --git a/snmp_builder/mibs/GMPLS-TE-STD-MIB.mib b/snmp_builder/mibs/GMPLS-TE-STD-MIB.mib
new file mode 100644
index 0000000..551214b
--- /dev/null
+++ b/snmp_builder/mibs/GMPLS-TE-STD-MIB.mib
@@ -0,0 +1,1749 @@
+GMPLS-TE-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+  Unsigned32, Counter32, Counter64, zeroDotZero, Gauge32
+    FROM SNMPv2-SMI                                   -- RFC 2578
+  MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+    FROM SNMPv2-CONF                                  -- RFC 2580
+  TruthValue, TimeStamp, RowPointer
+    FROM SNMPv2-TC                                    -- RFC 2579
+  InetAddress, InetAddressType
+    FROM INET-ADDRESS-MIB                             -- RFC 4001
+  SnmpAdminString
+    FROM SNMP-FRAMEWORK-MIB                           -- RFC 3411
+  mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId,
+  mplsTunnelEgressLSRId, mplsTunnelHopListIndex,
+  mplsTunnelHopPathOptionIndex, mplsTunnelHopIndex,
+  mplsTunnelARHopListIndex, mplsTunnelARHopIndex,
+  mplsTunnelCHopListIndex, mplsTunnelCHopIndex,
+  mplsTunnelEntry,
+  mplsTunnelAdminStatus, mplsTunnelOperStatus,
+  mplsTunnelGroup, mplsTunnelScalarGroup
+    FROM MPLS-TE-STD-MIB                              -- RFC3812
+  IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC,
+  IANAGmplsGeneralizedPidTC, IANAGmplsAdminStatusInformationTC
+    FROM IANA-GMPLS-TC-MIB
+  mplsStdMIB
+    FROM MPLS-TC-STD-MIB                              -- RFC 3811
+;
+
+gmplsTeStdMIB MODULE-IDENTITY
+      LAST-UPDATED
+         "200702270000Z" -- 27 February 2007 00:00:00 GMT
+      ORGANIZATION
+        "IETF Common Control and Measurement Plane (CCAMP) Working
+         Group"
+      CONTACT-INFO
+        "       Thomas D. Nadeau
+                Cisco Systems, Inc.
+         Email: tnadeau@cisco.com
+                Adrian Farrel
+                Old Dog Consulting
+         Email: adrian@olddog.co.uk
+
+         Comments about this document should be emailed directly
+         to the CCAMP working group mailing list at
+         ccamp@ops.ietf.org."
+      DESCRIPTION
+        "Copyright (C) The IETF Trust (2007).  This version of
+         this MIB module is part of RFC 4802; see the RFC itself for
+         full legal notices.
+
+         This MIB module contains managed object definitions
+         for GMPLS Traffic Engineering (TE) as defined in:
+         1. Generalized Multi-Protocol Label Switching (GMPLS)
+            Signaling Functional Description, Berger, L. (Editor),
+            RFC 3471, January 2003.
+         2. Generalized MPLS Signaling - RSVP-TE Extensions, Berger,
+            L. (Editor), RFC 3473, January 2003.
+         "
+      REVISION
+        "200702270000Z" -- 27 February 2007 00:00:00 GMT
+      DESCRIPTION
+        "Initial version issued as part of RFC 4802."
+::= { mplsStdMIB 13 }
+
+gmplsTeNotifications OBJECT IDENTIFIER ::= { gmplsTeStdMIB 0 }
+gmplsTeScalars OBJECT IDENTIFIER ::= { gmplsTeStdMIB 1 }
+gmplsTeObjects OBJECT IDENTIFIER ::= { gmplsTeStdMIB 2 }
+gmplsTeConformance OBJECT IDENTIFIER ::= { gmplsTeStdMIB 3 }
+
+gmplsTunnelsConfigured OBJECT-TYPE
+  SYNTAX  Gauge32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The number of GMPLS tunnels configured on this device.  A GMPLS
+
+     tunnel is considered configured if an entry for the tunnel
+     exists in the gmplsTunnelTable and the associated
+     mplsTunnelRowStatus is active(1)."
+::= { gmplsTeScalars 1 }
+
+gmplsTunnelsActive OBJECT-TYPE
+  SYNTAX  Gauge32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The number of GMPLS tunnels active on this device.  A GMPLS
+     tunnel is considered active if there is an entry in the
+     gmplsTunnelTable and the associated mplsTunnelOperStatus for the
+     tunnel is up(1)."
+::= { gmplsTeScalars 2 }
+
+gmplsTunnelTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF GmplsTunnelEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "The gmplsTunnelTable sparsely extends the mplsTunnelTable of
+     MPLS-TE-STD-MIB.  It allows GMPLS tunnels to be created between
+     an LSR and a remote endpoint, and existing tunnels to be
+     reconfigured or removed.
+
+     Note that only point-to-point tunnel segments are supported,
+     although multipoint-to-point and point-to-multipoint
+     connections are supported by an LSR acting as a cross-connect.
+     Each tunnel can thus have one out-segment originating at this
+     LSR and/or one in-segment terminating at this LSR.
+
+     The row status of an entry in this table is controlled by the
+     mplsTunnelRowStatus in the corresponding entry in the
+     mplsTunnelTable.  When the corresponding mplsTunnelRowStatus has
+     value active(1), a row in this table may not be created or
+     modified.
+
+     The exception to this rule is the
+     gmplsTunnelAdminStatusInformation object, which can be modified
+     while the tunnel is active."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812."
+::= { gmplsTeObjects 1 }
+
+gmplsTunnelEntry OBJECT-TYPE
+  SYNTAX  GmplsTunnelEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table in association with the corresponding
+     entry in the mplsTunnelTable represents a GMPLS tunnel.
+
+     An entry can be created by a network administrator via SNMP SET
+     commands, or in response to signaling protocol events."
+  INDEX {
+    mplsTunnelIndex,
+    mplsTunnelInstance,
+    mplsTunnelIngressLSRId,
+    mplsTunnelEgressLSRId
+  }
+::= { gmplsTunnelTable 1 }
+
+  GmplsTunnelEntry ::= SEQUENCE {
+   gmplsTunnelUnnumIf                       TruthValue,
+   gmplsTunnelAttributes                    BITS,
+   gmplsTunnelLSPEncoding                   IANAGmplsLSPEncodingTypeTC,
+   gmplsTunnelSwitchingType                 IANAGmplsSwitchingTypeTC,
+   gmplsTunnelLinkProtection                BITS,
+   gmplsTunnelGPid                          IANAGmplsGeneralizedPidTC,
+   gmplsTunnelSecondary                     TruthValue,
+   gmplsTunnelDirection                     INTEGER,
+   gmplsTunnelPathComp                      INTEGER,
+   gmplsTunnelUpstreamNotifyRecipientType   InetAddressType,
+   gmplsTunnelUpstreamNotifyRecipient       InetAddress,
+   gmplsTunnelSendResvNotifyRecipientType   InetAddressType,
+   gmplsTunnelSendResvNotifyRecipient       InetAddress,
+   gmplsTunnelDownstreamNotifyRecipientType InetAddressType,
+   gmplsTunnelDownstreamNotifyRecipient     InetAddress,
+   gmplsTunnelSendPathNotifyRecipientType   InetAddressType,
+   gmplsTunnelSendPathNotifyRecipient       InetAddress,
+   gmplsTunnelAdminStatusFlags        IANAGmplsAdminStatusInformationTC,
+   gmplsTunnelExtraParamsPtr                RowPointer
+   }
+
+gmplsTunnelUnnumIf OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Denotes whether or not this tunnel corresponds to an unnumbered
+     interface represented by an entry in the interfaces group table
+     (the ifTable) with ifType set to mpls(166).
+
+     This object is only used if mplsTunnelIsIf is set to 'true'.
+
+     If both this object and the mplsTunnelIsIf object are set to
+     'true', the originating LSR adds an LSP_TUNNEL_INTERFACE_ID
+     object to the outgoing Path message.
+
+     This object contains information that is only used by the
+     terminating LSR."
+  REFERENCE
+    "1. Signalling Unnumbered Links in RSVP-TE, RFC 3477."
+  DEFVAL  { false }
+::= { gmplsTunnelEntry 1 }
+
+gmplsTunnelAttributes OBJECT-TYPE
+  SYNTAX BITS {
+    labelRecordingDesired(0)
+  }
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "This bitmask indicates optional parameters for this tunnel.
+     These bits should be taken in addition to those defined in
+     mplsTunnelSessionAttributes in order to determine the full set
+     of options to be signaled (for example SESSION_ATTRIBUTES flags
+     in RSVP-TE).  The following describes these bitfields:
+
+     labelRecordingDesired
+       This flag is set to indicate that label information should be
+       included when doing a route record.  This bit is not valid
+       unless the recordRoute bit is set."
+  REFERENCE
+    "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
+        sections 4.4.3, 4.7.1, and 4.7.2."
+  DEFVAL  { { } }
+::= { gmplsTunnelEntry 2 }
+
+gmplsTunnelLSPEncoding OBJECT-TYPE
+  SYNTAX  IANAGmplsLSPEncodingTypeTC
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "This object indicates the encoding of the LSP being requested.
+
+     A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is
+     not in use.  Some objects in this MIB module may be of use for
+     MPLS signaling extensions that do not use GMPLS signaling.  By
+     setting this object to 'tunnelLspNotGmpls', an application may
+
+     indicate that only those objects meaningful in MPLS should be
+     examined.
+
+     The values to use are defined in the TEXTUAL-CONVENTION
+     IANAGmplsLSPEncodingTypeTC found in the IANA-GMPLS-TC-MIB
+     module."
+  DEFVAL  { tunnelLspNotGmpls }
+::= { gmplsTunnelEntry 3 }
+
+gmplsTunnelSwitchingType OBJECT-TYPE
+  SYNTAX  IANAGmplsSwitchingTypeTC
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the type of switching that should be performed on
+     a particular link.  This field is needed for links that
+     advertise more than one type of switching capability.
+
+     The values to use are defined in the TEXTUAL-CONVENTION
+     IANAGmplsSwitchingTypeTC found in the IANA-GMPLS-TC-MIB module.
+
+     This object is only meaningful if gmplsTunnelLSPEncodingType
+     is not set to 'tunnelLspNotGmpls'."
+  DEFVAL  { unknown }
+::= { gmplsTunnelEntry 4 }
+
+gmplsTunnelLinkProtection OBJECT-TYPE
+  SYNTAX  BITS {
+    extraTraffic(0),
+    unprotected(1),
+    shared(2),
+    dedicatedOneToOne(3),
+    dedicatedOnePlusOne(4),
+    enhanced(5)
+  }
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "This bitmask indicates the level of link protection required.  A
+     value of zero (no bits set) indicates that any protection may be
+     used.  The following describes these bitfields:
+
+     extraTraffic
+       This flag is set to indicate that the LSP should use links
+       that are protecting other (primary) traffic.  Such LSPs may be
+       preempted when the links carrying the (primary) traffic being
+       protected fail.
+
+     unprotected
+       This flag is set to indicate that the LSP should not use any
+       link layer protection.
+
+     shared
+       This flag is set to indicate that a shared link layer
+       protection scheme, such as 1:N protection, should be used to
+       support the LSP.
+
+     dedicatedOneToOne
+       This flag is set to indicate that a dedicated link layer
+       protection scheme, i.e., 1:1 protection, should be used to
+       support the LSP.
+
+     dedicatedOnePlusOne
+       This flag is set to indicate that a dedicated link layer
+       protection scheme, i.e., 1+1 protection, should be used to
+       support the LSP.
+
+     enhanced
+       This flag is set to indicate that a protection scheme that is
+       more reliable than Dedicated 1+1 should be used, e.g., 4 fiber
+       BLSR/MS-SPRING.
+
+     This object is only meaningful if gmplsTunnelLSPEncoding is
+     not set to 'tunnelLspNotGmpls'."
+  REFERENCE
+     "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+         Functional Description, RFC 3471, section 7.1."
+  DEFVAL  { { } }
+::= { gmplsTunnelEntry 5 }
+
+gmplsTunnelGPid OBJECT-TYPE
+  SYNTAX  IANAGmplsGeneralizedPidTC
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "This object indicates the payload carried by the LSP.  It is only
+     required when GMPLS will be used for this LSP.
+
+     The values to use are defined in the TEXTUAL-CONVENTION
+     IANAGmplsGeneralizedPidTC found in the IANA-GMPLS-TC-MIB module.
+
+     This object is only meaningful if gmplsTunnelLSPEncoding is not
+     set to 'tunnelLspNotGmpls'."
+  DEFVAL  { unknown }
+::= { gmplsTunnelEntry 6 }
+
+gmplsTunnelSecondary OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates that the requested LSP is a secondary LSP.
+
+     This object is only meaningful if gmplsTunnelLSPEncoding is not
+     set to 'tunnelLspNotGmpls'."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 7.1."
+  DEFVAL  { false }
+::= { gmplsTunnelEntry 7 }
+
+gmplsTunnelDirection OBJECT-TYPE
+  SYNTAX  INTEGER {
+    forward(0),
+    bidirectional(1)
+  }
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Whether this tunnel carries forward data only (is
+     unidirectional) or is bidirectional.
+
+     Values of this object other than 'forward' are meaningful
+     only if gmplsTunnelLSPEncoding is not set to
+     'tunnelLspNotGmpls'."
+  DEFVAL { forward }
+::= { gmplsTunnelEntry 8 }
+
+gmplsTunnelPathComp OBJECT-TYPE
+  SYNTAX  INTEGER {
+    dynamicFull(1),   -- CSPF fully computed
+    explicit(2),      -- fully specified path
+    dynamicPartial(3) -- CSPF partially computed
+  }
+  MAX-ACCESS read-create
+  STATUS current
+  DESCRIPTION
+    "This value instructs the source node on how to perform path
+     computation on the explicit route specified by the associated
+     entries in the gmplsTunnelHopTable.
+
+     dynamicFull
+       The user specifies at least the source and
+       destination of the path and expects that the Constrained
+
+       Shortest Path First (CSPF) will calculate the remainder
+       of the path.
+
+     explicit
+       The user specifies the entire path for the tunnel to
+       take.  This path may contain strict or loose hops.
+       Evaluation of the explicit route will be performed
+       hop by hop through the network.
+
+     dynamicPartial
+       The user specifies at least the source and
+       destination of the path and expects that the CSPF
+       will calculate the remainder of the path.  The path
+       computed by CSPF is allowed to be only partially
+       computed allowing the remainder of the path to be
+       filled in across the network.
+
+     When an entry is present in the gmplsTunnelTable for a
+     tunnel, gmplsTunnelPathComp MUST be used and any
+     corresponding mplsTunnelHopEntryPathComp object in the
+     mplsTunnelHopTable MUST be ignored and SHOULD not be set.
+
+     mplsTunnelHopTable and mplsTunnelHopEntryPathComp are part of
+     MPLS-TE-STD-MIB.
+
+     This object should be ignored if the value of
+     gmplsTunnelLSPEncoding is 'tunnelLspNotGmpls'."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812."
+  DEFVAL { dynamicFull }
+::= { gmplsTunnelEntry 9 }
+
+gmplsTunnelUpstreamNotifyRecipientType OBJECT-TYPE
+  SYNTAX  InetAddressType
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+   "This object is used to aid in interpretation of
+    gmplsTunnelUpstreamNotifyRecipient."
+  DEFVAL { unknown }
+::= { gmplsTunnelEntry 10 }
+
+gmplsTunnelUpstreamNotifyRecipient OBJECT-TYPE
+  SYNTAX  InetAddress
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the address of the upstream recipient for Notify
+     messages relating to this tunnel and issued by this LSR.  This
+     information is typically received from an upstream LSR in a Path
+     message.
+
+     This object is only valid when signaling a tunnel using RSVP.
+
+     It is also not valid at the head end of a tunnel since there are
+     no upstream LSRs to which to send a Notify message.
+
+     This object is interpreted in the context of the value of
+     gmplsTunnelUpstreamNotifyRecipientType. If this object is set to
+     0, the value of gmplsTunnelUpstreamNotifyRecipientType MUST be
+     set to unknown(0)."
+  REFERENCE
+    "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 4.2. "
+  DEFVAL { '00000000'H } -- 0.0.0.0
+::= { gmplsTunnelEntry 11 }
+
+gmplsTunnelSendResvNotifyRecipientType OBJECT-TYPE
+  SYNTAX  InetAddressType
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+   "This object is used to aid in interpretation of
+    gmplsTunnelSendResvNotifyRecipient."
+  DEFVAL { unknown }
+::= { gmplsTunnelEntry 12 }
+
+gmplsTunnelSendResvNotifyRecipient OBJECT-TYPE
+  SYNTAX  InetAddress
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates to an upstream LSR the address to which it should send
+     downstream Notify messages relating to this tunnel.
+
+     This object is only valid when signaling a tunnel using RSVP.
+
+     It is also not valid at the head end of the tunnel since no Resv
+     messages are sent from that LSR for this tunnel.
+
+     If set to 0, no Notify Request object will be included in the
+     outgoing Resv messages.
+
+     This object is interpreted in the context of the value of
+     gmplsTunnelSendResvNotifyRecipientType. If this object is set to
+
+     0, the value of gmplsTunnelSendResvNotifyRecipientType MUST be
+     set to unknown(0)."
+  REFERENCE
+    "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 4.2. "
+  DEFVAL { '00000000'H } -- 0.0.0.0
+::= { gmplsTunnelEntry 13 }
+
+gmplsTunnelDownstreamNotifyRecipientType OBJECT-TYPE
+  SYNTAX  InetAddressType
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+   "This object is used to aid in interpretation of
+    gmplsTunnelDownstreamNotifyRecipient."
+  DEFVAL { unknown }
+::= { gmplsTunnelEntry 14 }
+
+gmplsTunnelDownstreamNotifyRecipient OBJECT-TYPE
+  SYNTAX  InetAddress
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the address of the downstream recipient for Notify
+     messages relating to this tunnel and issued by this LSR.  This
+     information is typically received from an upstream LSR in a Resv
+     message.  This object is only valid when signaling a tunnel using
+     RSVP.
+
+     It is also not valid at the tail end of a tunnel since there are
+     no downstream LSRs to which to send a Notify message.
+
+     This object is interpreted in the context of the value of
+     gmplsTunnelDownstreamNotifyRecipientType. If this object is set
+     to 0, the value of gmplsTunnelDownstreamNotifyRecipientType MUST
+     be set to unknown(0)."
+  REFERENCE
+    "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 4.2.
+    "
+  DEFVAL { '00000000'H } -- 0.0.0.0
+::= { gmplsTunnelEntry 15 }
+
+gmplsTunnelSendPathNotifyRecipientType OBJECT-TYPE
+  SYNTAX  InetAddressType
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+   "This object is used to aid in interpretation of
+    gmplsTunnelSendPathNotifyRecipient."
+  DEFVAL { unknown }
+::= { gmplsTunnelEntry 16 }
+
+gmplsTunnelSendPathNotifyRecipient OBJECT-TYPE
+  SYNTAX  InetAddress
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates to a downstream LSR the address to which it should
+     send upstream Notify messages relating to this tunnel.
+
+     This object is only valid when signaling a tunnel using RSVP.
+
+     It is also not valid at the tail end of the tunnel since no Path
+     messages are sent from that LSR for this tunnel.
+
+     If set to 0, no Notify Request object will be included in the
+     outgoing Path messages.
+
+     This object is interpreted in the context of the value of
+     gmplsTunnelSendPathNotifyRecipientType.  If this object is set to
+     0, the value of gmplsTunnelSendPathNotifyRecipientType MUST be
+     set to unknown(0)."
+  REFERENCE
+    "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 4.2. "
+  DEFVAL { '00000000'H } -- 0.0.0.0
+::= { gmplsTunnelEntry 17 }
+
+gmplsTunnelAdminStatusFlags OBJECT-TYPE
+   SYNTAX   IANAGmplsAdminStatusInformationTC
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+     "Determines the setting of the Admin Status flags in the
+      Admin Status object or TLV, as described in RFC 3471.  Setting
+      this field to a non-zero value will result in the inclusion of
+      the Admin Status object on signaling messages.
+
+      The values to use are defined in the TEXTUAL-CONVENTION
+      IANAGmplsAdminStatusInformationTC found in the
+      IANA-GMPLS-TC-MIB module.
+
+      This value of this object can be modified when the
+      corresponding mplsTunnelRowStatus and mplsTunnelAdminStatus
+      is active(1).  By doing so, a new signaling message will be
+
+      triggered including the requested Admin Status object or
+      TLV."
+  REFERENCE
+    "1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471, section 8."
+  DEFVAL  { { } }
+  ::= { gmplsTunnelEntry 18 }
+
+gmplsTunnelExtraParamsPtr  OBJECT-TYPE
+  SYNTAX       RowPointer
+  MAX-ACCESS   read-create
+  STATUS       current
+  DESCRIPTION
+    "Some tunnels will run over transports that can usefully support
+     technology-specific additional parameters (for example,
+     Synchronous Optical Network (SONET) resource usage).  Such
+     parameters can be supplied in an external table and referenced
+     from here.
+
+     A value of zeroDotzero in this attribute indicates that there
+     is no such additional information."
+  DEFVAL  { zeroDotZero }
+  ::= { gmplsTunnelEntry 19 }
+
+gmplsTunnelHopTable  OBJECT-TYPE
+  SYNTAX  SEQUENCE OF GmplsTunnelHopEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "The gmplsTunnelHopTable sparsely extends the mplsTunnelHopTable
+     of MPLS-TE-STD-MIB.  It is used to indicate the Explicit Labels
+     to be used in an explicit path for a GMPLS tunnel defined in the
+     mplsTunnelTable and gmplsTunnelTable, when it is established
+     using signaling.  It does not insert new hops, but does define
+     new values for hops defined in the mplsTunnelHopTable.
+
+     Each row in this table is indexed by the same indexes as in the
+     mplsTunnelHopTable.  It is acceptable for some rows in the
+     mplsTunnelHopTable to have corresponding entries in this table
+     and some to have no corresponding entry in this table.
+
+     The storage type for this entry is given by the value
+     of mplsTunnelHopStorageType in the corresponding entry in the
+     mplsTunnelHopTable.
+
+     The row status of an entry in this table is controlled by
+     mplsTunnelHopRowStatus in the corresponding entry in the
+     mplsTunnelHopTable.  That is, it is not permitted to create a row
+
+     in this table, or to modify an existing row, when the
+     corresponding mplsTunnelHopRowStatus has the value active(1)."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812.
+     2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473.
+    "
+::= { gmplsTeObjects 2 }
+
+gmplsTunnelHopEntry  OBJECT-TYPE
+  SYNTAX  GmplsTunnelHopEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table represents additions to a tunnel hop
+     defined in mplsTunnelHopEntry.  At an ingress to a tunnel, an
+     entry in this table is created by a network administrator for an
+     ERLSP to be set up by a signaling protocol.  At transit and
+     egress nodes, an entry in this table may be used to represent the
+     explicit path instructions received using the signaling
+     protocol."
+  INDEX {
+    mplsTunnelHopListIndex,
+    mplsTunnelHopPathOptionIndex,
+    mplsTunnelHopIndex
+  }
+::= { gmplsTunnelHopTable 1 }
+
+GmplsTunnelHopEntry ::= SEQUENCE {
+  gmplsTunnelHopLabelStatuses           BITS,
+  gmplsTunnelHopExplicitForwardLabel    Unsigned32,
+  gmplsTunnelHopExplicitForwardLabelPtr RowPointer,
+  gmplsTunnelHopExplicitReverseLabel    Unsigned32,
+  gmplsTunnelHopExplicitReverseLabelPtr RowPointer
+}
+
+gmplsTunnelHopLabelStatuses OBJECT-TYPE
+  SYNTAX  BITS {
+    forwardPresent(0),
+    reversePresent(1)
+  }
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "This bitmask indicates the presence of labels indicated by the
+     gmplsTunnelHopExplicitForwardLabel or
+     gmplsTunnelHopExplicitForwardLabelPtr, and
+     gmplsTunnelHopExplicitReverseLabel or
+
+     gmplsTunnelHopExplicitReverseLabelPtr objects.
+
+     For the Present bits, a set bit indicates that a label is
+     present for this hop in the route.  This allows zero to be a
+     valid label value."
+  DEFVAL  { { } }
+::= { gmplsTunnelHopEntry 1 }
+
+gmplsTunnelHopExplicitForwardLabel OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "If gmplsTunnelHopLabelStatuses object indicates that a Forward
+     Label is present and gmplsTunnelHopExplicitForwardLabelPtr
+     contains the value zeroDotZero, then the label to use on this
+     hop is represented by the value of this object."
+::= { gmplsTunnelHopEntry 2 }
+
+gmplsTunnelHopExplicitForwardLabelPtr OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelHopLabelStatuses object indicates that a
+     Forward Label is present, this object contains a pointer to a
+     row in another MIB table (such as the gmplsLabelTable of
+     GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
+     in the forward direction.
+
+     If the gmplsTunnelHopLabelStatuses object indicates that a
+     Forward Label is present and this object contains the value
+     zeroDotZero, then the label to use on this hop is found in the
+     gmplsTunnelHopExplicitForwardLabel object."
+  DEFVAL  { zeroDotZero }
+::= { gmplsTunnelHopEntry 3 }
+
+gmplsTunnelHopExplicitReverseLabel OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelHopLabelStatuses object indicates that a
+     Reverse Label is present and
+     gmplsTunnelHopExplicitReverseLabelPtr contains the value
+     zeroDotZero, then the label to use on this hop is found in
+     this object encoded as a 32-bit integer."
+::= { gmplsTunnelHopEntry 4 }
+
+gmplsTunnelHopExplicitReverseLabelPtr OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS read-create
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelHopLabelStatuses object indicates that a
+     Reverse Label is present, this object contains a pointer to a
+     row in another MIB table (such as the gmplsLabelTable of
+     GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
+     in the reverse direction.
+
+     If the gmplsTunnelHopLabelStatuses object indicates that a
+     Reverse Label is present and this object contains the value
+     zeroDotZero, then the label to use on this hop is found in the
+     gmplsTunnelHopExplicitReverseLabel object."
+  DEFVAL  { zeroDotZero }
+::= { gmplsTunnelHopEntry 5 }
+
+gmplsTunnelARHopTable  OBJECT-TYPE
+  SYNTAX  SEQUENCE OF GmplsTunnelARHopEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "The gmplsTunnelARHopTable sparsely extends the
+     mplsTunnelARHopTable of MPLS-TE-STD-MIB.  It is used to
+     indicate the labels currently in use for a GMPLS tunnel
+     defined in the mplsTunnelTable and gmplsTunnelTable, as
+     reported by the signaling protocol.  It does not insert
+     new hops, but does define new values for hops defined in
+     the mplsTunnelARHopTable.
+
+     Each row in this table is indexed by the same indexes as in the
+     mplsTunnelARHopTable.  It is acceptable for some rows in the
+     mplsTunnelARHopTable to have corresponding entries in this table
+     and some to have no corresponding entry in this table.
+
+     Note that since the information necessary to build entries
+     within this table is not provided by some signaling protocols
+     and might not be returned in all cases of other signaling
+     protocols, implementation of this table and the
+     mplsTunnelARHopTable is optional.  Furthermore, since the
+     information in this table is actually provided by the
+     signaling protocol after the path has been set up, the entries
+     in this table are provided only for observation, and hence,
+     all variables in this table are accessible exclusively as
+     read-only."
+  REFERENCE
+    "1. Extensions to RSVP for LSP Tunnels, RFC 3209.
+
+     2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473.
+     3. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812."
+::= { gmplsTeObjects 3 }
+
+gmplsTunnelARHopEntry  OBJECT-TYPE
+  SYNTAX  GmplsTunnelARHopEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table represents additions to a tunnel hop
+     visible in mplsTunnelARHopEntry.  An entry is created by the
+     signaling protocol for a signaled ERLSP set up by the signaling
+     protocol.
+
+     At any node on the LSP (ingress, transit, or egress), this table
+     and the mplsTunnelARHopTable (if the tables are supported and if
+     the signaling protocol is recording actual route information)
+     contain the actual route of the whole tunnel.  If the signaling
+     protocol is not recording the actual route, this table MAY
+     report the information from the gmplsTunnelHopTable or the
+     gmplsTunnelCHopTable.
+
+     Note that the recording of actual labels is distinct from the
+     recording of the actual route in some signaling protocols.  This
+     feature is enabled using the gmplsTunnelAttributes object."
+  INDEX {
+    mplsTunnelARHopListIndex,
+    mplsTunnelARHopIndex
+  }
+::= { gmplsTunnelARHopTable 1 }
+
+GmplsTunnelARHopEntry ::= SEQUENCE {
+  gmplsTunnelARHopLabelStatuses           BITS,
+  gmplsTunnelARHopExplicitForwardLabel    Unsigned32,
+  gmplsTunnelARHopExplicitForwardLabelPtr RowPointer,
+  gmplsTunnelARHopExplicitReverseLabel    Unsigned32,
+  gmplsTunnelARHopExplicitReverseLabelPtr RowPointer,
+  gmplsTunnelARHopProtection              BITS
+}
+
+gmplsTunnelARHopLabelStatuses OBJECT-TYPE
+  SYNTAX  BITS {
+    forwardPresent(0),
+    reversePresent(1),
+    forwardGlobal(2),
+    reverseGlobal(3)
+  }
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "This bitmask indicates the presence and status of labels
+     indicated by the gmplsTunnelARHopExplicitForwardLabel or
+     gmplsTunnelARHopExplicitForwardLabelPtr, and
+     gmplsTunnelARHopExplicitReverseLabel or
+     gmplsTunnelARHopExplicitReverseLabelPtr objects.
+
+     For the Present bits, a set bit indicates that a label is
+     present for this hop in the route.
+
+     For the Global bits, a set bit indicates that the label comes
+     from the Global Label Space; a clear bit indicates that this is
+     a Per-Interface label.  A Global bit only has meaning if the
+     corresponding Present bit is set."
+::= { gmplsTunnelARHopEntry 1 }
+
+gmplsTunnelARHopExplicitForwardLabel OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelARHopLabelStatuses object indicates that a
+     Forward Label is present and
+     gmplsTunnelARHopExplicitForwardLabelPtr contains the value
+     zeroDotZero, then the label in use on this hop is found in this
+     object encoded as a 32-bit integer."
+::= { gmplsTunnelARHopEntry 2 }
+
+gmplsTunnelARHopExplicitForwardLabelPtr OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelARHopLabelStatuses object indicates that a
+     Forward Label is present, this object contains a pointer to a
+     row in another MIB table (such as the gmplsLabelTable of
+     GMPLS-LABEL-STD-MIB) that contains the label in use on this hop
+     in the forward direction.
+
+     If the gmplsTunnelARHopLabelStatuses object indicates that a
+     Forward Label is present and this object contains the value
+     zeroDotZero, then the label in use on this hop is found in the
+     gmplsTunnelARHopExplicitForwardLabel object."
+::= { gmplsTunnelARHopEntry 3 }
+
+gmplsTunnelARHopExplicitReverseLabel OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelARHopLabelStatuses object indicates that a
+     Reverse Label is present and
+     gmplsTunnelARHopExplicitReverseLabelPtr contains the value
+     zeroDotZero, then the label in use on this hop is found in this
+     object encoded as a 32-bit integer."
+::= { gmplsTunnelARHopEntry 4 }
+
+gmplsTunnelARHopExplicitReverseLabelPtr OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelARHopLabelStatuses object indicates that a
+     Reverse Label is present, this object contains a pointer to a
+     row in another MIB table (such as the gmplsLabelTable of
+     GMPLS-LABEL-STD-MIB) that contains the label in use on this hop
+     in the reverse direction.
+
+     If the gmplsTunnelARHopLabelStatuses object indicates that a
+     Reverse Label is present and this object contains the value
+     zeroDotZero, then the label in use on this hop is found in the
+     gmplsTunnelARHopExplicitReverseLabel object."
+::= { gmplsTunnelARHopEntry 5 }
+
+gmplsTunnelARHopProtection  OBJECT-TYPE
+  SYNTAX  BITS {
+    localAvailable(0),
+    localInUse(1)
+  }
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "Availability and usage of protection on the reported link.
+
+     localAvailable
+       This flag is set to indicate that the link downstream of this
+       node is protected via a local repair mechanism.
+
+     localInUse
+       This flag is set to indicate that a local repair mechanism is
+       in use to maintain this tunnel (usually in the face of an
+       outage of the link it was previously routed over)."
+  REFERENCE
+    "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
+        section 4.4.1."
+::= { gmplsTunnelARHopEntry 6 }
+
+gmplsTunnelCHopTable  OBJECT-TYPE
+  SYNTAX  SEQUENCE OF GmplsTunnelCHopEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "The gmplsTunnelCHopTable sparsely extends the
+     mplsTunnelCHopTable of MPLS-TE-STD-MIB.  It is used to indicate
+     additional information about the hops of a GMPLS tunnel defined
+     in the mplsTunnelTable and gmplsTunnelTable, as computed by a
+     constraint-based routing protocol, based on the
+     mplsTunnelHopTable and the gmplsTunnelHopTable.
+
+     Each row in this table is indexed by the same indexes as in the
+     mplsTunnelCHopTable.  It is acceptable for some rows in the
+     mplsTunnelCHopTable to have corresponding entries in this table
+     and some to have no corresponding entry in this table.
+
+     Please note that since the information necessary to build
+     entries within this table may not be supported by some LSRs,
+     implementation of this table is optional.
+
+     Furthermore, since the information in this table is actually
+     provided by a path computation component after the path has been
+     computed, the entries in this table are provided only for
+     observation, and hence, all objects in this table are accessible
+     exclusively as read-only."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812.
+     2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473."
+::= { gmplsTeObjects 4 }
+
+gmplsTunnelCHopEntry  OBJECT-TYPE
+  SYNTAX  GmplsTunnelCHopEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table represents additions to a computed tunnel
+     hop visible in mplsTunnelCHopEntry.  An entry is created by a
+     path computation component based on the hops specified in the
+     corresponding mplsTunnelHopTable and gmplsTunnelHopTable.
+
+     At a transit LSR, this table (if the table is supported) MAY
+     contain the path computed by a path computation engine on (or on
+
+     behalf of) the transit LSR."
+  INDEX {
+    mplsTunnelCHopListIndex,
+    mplsTunnelCHopIndex
+  }
+::= { gmplsTunnelCHopTable 1 }
+
+GmplsTunnelCHopEntry ::= SEQUENCE {
+  gmplsTunnelCHopLabelStatuses           BITS,
+  gmplsTunnelCHopExplicitForwardLabel    Unsigned32,
+  gmplsTunnelCHopExplicitForwardLabelPtr RowPointer,
+  gmplsTunnelCHopExplicitReverseLabel    Unsigned32,
+  gmplsTunnelCHopExplicitReverseLabelPtr RowPointer
+}
+
+gmplsTunnelCHopLabelStatuses OBJECT-TYPE
+  SYNTAX  BITS {
+    forwardPresent(0),
+    reversePresent(1)
+  }
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "This bitmask indicates the presence of labels indicated by the
+     gmplsTunnelCHopExplicitForwardLabel or
+     gmplsTunnelCHopExplicitForwardLabelPtr and
+     gmplsTunnelCHopExplicitReverseLabel or
+     gmplsTunnelCHopExplicitReverseLabelPtr objects.
+
+     A set bit indicates that a label is present for this hop in the
+     route, thus allowing zero to be a valid label value."
+::= { gmplsTunnelCHopEntry 1 }
+
+gmplsTunnelCHopExplicitForwardLabel OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelCHopLabelStatuses object indicates that a
+     Forward Label is present and
+     gmplsTunnelCHopExplicitForwardLabelPtr contains the value
+     zeroDotZero, then the label to use on this hop is found in this
+     object encoded as a 32-bit integer."
+::= { gmplsTunnelCHopEntry 2 }
+
+gmplsTunnelCHopExplicitForwardLabelPtr OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelCHopLabelStatuses object indicates that a
+     Forward Label is present, this object contains a pointer to a
+     row in another MIB table (such as the gmplsLabelTable of
+     GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
+     in the forward direction.
+
+     If the gmplsTunnelCHopLabelStatuses object indicates that a
+     Forward Label is present and this object contains the value
+     zeroDotZero, then the label to use on this hop is found in the
+     gmplsTunnelCHopExplicitForwardLabel object."
+::= { gmplsTunnelCHopEntry 3 }
+
+gmplsTunnelCHopExplicitReverseLabel OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelCHopLabelStatuses object indicates that a
+     Reverse Label is present and
+     gmplsTunnelCHopExplicitReverseLabelPtr contains the value
+     zeroDotZero, then the label to use on this hop is found in this
+     object encoded as a 32-bit integer."
+::= { gmplsTunnelCHopEntry 4 }
+
+gmplsTunnelCHopExplicitReverseLabelPtr OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "If the gmplsTunnelCHopLabelStatuses object indicates that a
+     Reverse Label is present, this object contains a pointer to a
+     row in another MIB table (such as the gmplsLabelTable of
+     GMPLS-LABEL-STD-MIB) that contains the label to use on this hop
+     in the reverse direction.
+
+     If the gmplsTunnelCHopLabelStatuses object indicates that a
+     Reverse Label is present and this object contains the value
+     zeroDotZero, then the label to use on this hop is found in the
+     gmplsTunnelCHopExplicitReverseLabel object."
+::= { gmplsTunnelCHopEntry 5 }
+
+gmplsTunnelReversePerfTable  OBJECT-TYPE
+  SYNTAX  SEQUENCE OF GmplsTunnelReversePerfEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This table augments the gmplsTunnelTable to provide
+     per-tunnel packet performance information for the reverse
+     direction of a bidirectional tunnel.  It can be seen as
+     supplementing the mplsTunnelPerfTable, which augments the
+     mplsTunnelTable.
+
+     For links that do not transport packets, these packet counters
+     cannot be maintained.  For such links, attempts to read the
+     objects in this table will return noSuchInstance.
+
+     A tunnel can be known to be bidirectional by inspecting the
+     gmplsTunnelDirection object."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812."
+::= { gmplsTeObjects 5 }
+
+gmplsTunnelReversePerfEntry OBJECT-TYPE
+  SYNTAX  GmplsTunnelReversePerfEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table is created by the LSR for every
+     bidirectional GMPLS tunnel where packets are visible to the
+     LSR."
+  AUGMENTS { gmplsTunnelEntry }
+::= { gmplsTunnelReversePerfTable 1 }
+
+GmplsTunnelReversePerfEntry ::= SEQUENCE {
+  gmplsTunnelReversePerfPackets     Counter32,
+  gmplsTunnelReversePerfHCPackets   Counter64,
+  gmplsTunnelReversePerfErrors      Counter32,
+  gmplsTunnelReversePerfBytes       Counter32,
+  gmplsTunnelReversePerfHCBytes     Counter64
+}
+
+gmplsTunnelReversePerfPackets OBJECT-TYPE
+  SYNTAX  Counter32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "Number of packets forwarded on the tunnel in the reverse
+     direction if it is bidirectional.
+
+     This object represents the 32-bit value of the least
+     significant part of the 64-bit value if both
+     gmplsTunnelReversePerfHCPackets and this object are returned.
+
+     For links that do not transport packets, this packet counter
+     cannot be maintained.  For such links, this value will return
+     noSuchInstance."
+::= { gmplsTunnelReversePerfEntry 1 }
+
+gmplsTunnelReversePerfHCPackets OBJECT-TYPE
+  SYNTAX  Counter64
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "High-capacity counter for number of packets forwarded on the
+     tunnel in the reverse direction if it is bidirectional.
+
+     For links that do not transport packets, this packet counter
+     cannot be maintained.  For such links, this value will return
+     noSuchInstance."
+::= { gmplsTunnelReversePerfEntry 2 }
+
+gmplsTunnelReversePerfErrors OBJECT-TYPE
+  SYNTAX  Counter32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "Number of errored packets received on the tunnel in the reverse
+     direction if it is bidirectional.  For links that do not
+     transport packets, this packet counter cannot be maintained.  For
+     such links, this value will return noSuchInstance."
+::= { gmplsTunnelReversePerfEntry 3 }
+
+gmplsTunnelReversePerfBytes OBJECT-TYPE
+  SYNTAX  Counter32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "Number of bytes forwarded on the tunnel in the reverse direction
+     if it is bidirectional.
+
+     This object represents the 32-bit value of the least
+     significant part of the 64-bit value if both
+     gmplsTunnelReversePerfHCBytes and this object are returned.
+
+     For links that do not transport packets, this packet counter
+     cannot be maintained.  For such links, this value will return
+     noSuchInstance."
+::= { gmplsTunnelReversePerfEntry 4 }
+
+gmplsTunnelReversePerfHCBytes OBJECT-TYPE
+  SYNTAX  Counter64
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "High-capacity counter for number of bytes forwarded on the
+     tunnel in the reverse direction if it is bidirectional.
+
+     For links that do not transport packets, this packet counter
+     cannot be maintained.  For such links, this value will return
+     noSuchInstance."
+::= { gmplsTunnelReversePerfEntry 5 }
+
+gmplsTunnelErrorTable  OBJECT-TYPE
+  SYNTAX  SEQUENCE OF GmplsTunnelErrorEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This table augments the mplsTunnelTable.
+
+     This table provides per-tunnel information about errors.  Errors
+     may be detected locally or reported through the signaling
+     protocol.  Error reporting is not exclusive to GMPLS, and this
+     table may be applied in MPLS systems.
+
+     Entries in this table are not persistent over system resets
+     or re-initializations of the management system."
+  REFERENCE
+    "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+        Management Information Base (MIB), RFC 3812."
+::= { gmplsTeObjects 6 }
+
+gmplsTunnelErrorEntry OBJECT-TYPE
+  SYNTAX  GmplsTunnelErrorEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table is created by the LSR for every tunnel
+     where error information is visible to the LSR.
+
+     Note that systems that read the objects in this table one at
+     a time and do not perform atomic operations to read entire
+     instantiated table rows at once, should, for each conceptual
+     column with valid data, read gmplsTunnelErrorLastTime
+     prior to the other objects in the row and again subsequent to
+     reading the last object of the row.  They should verify that
+     the value of gmplsTunnelErrorLastTime did not change and
+     thereby ensure that all data read belongs to the same error
+     event."
+  AUGMENTS { mplsTunnelEntry }
+::= { gmplsTunnelErrorTable 1 }
+
+GmplsTunnelErrorEntry ::= SEQUENCE {
+  gmplsTunnelErrorLastErrorType      INTEGER,
+  gmplsTunnelErrorLastTime           TimeStamp,
+  gmplsTunnelErrorReporterType       InetAddressType,
+  gmplsTunnelErrorReporter           InetAddress,
+  gmplsTunnelErrorCode               Unsigned32,
+  gmplsTunnelErrorSubcode            Unsigned32,
+  gmplsTunnelErrorTLVs               OCTET STRING,
+  gmplsTunnelErrorHelpString         SnmpAdminString
+}
+
+gmplsTunnelErrorLastErrorType OBJECT-TYPE
+  SYNTAX  INTEGER {
+    noError(0),
+    unknown(1),
+    protocol(2),
+    pathComputation(3),
+    localConfiguration(4),
+    localResources(5),
+    localOther(6)
+  }
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The nature of the last error.  Provides interpretation context
+     for gmplsTunnelErrorProtocolCode and
+     gmplsTunnelErrorProtocolSubcode.
+
+     A value of noError(0) shows that there is no error associated
+     with this tunnel and means that the other objects in this table
+     entry (conceptual row) have no meaning.
+
+     A value of unknown(1) shows that there is an error but that no
+     additional information about the cause is known.  The error may
+     have been received in a signaled message or generated locally.
+
+     A value of protocol(2) or pathComputation(3) indicates the
+     cause of an error and identifies an error that has been received
+     through signaling or will itself be signaled.
+
+     A value of localConfiguration(4), localResources(5) or
+     localOther(6) identifies an error that has been detected
+     by the local node but that will not be reported through
+     signaling."
+::= { gmplsTunnelErrorEntry 1 }
+
+gmplsTunnelErrorLastTime OBJECT-TYPE
+  SYNTAX  TimeStamp
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The time at which the last error occurred.  This is presented as
+     the value of SysUpTime when the error occurred or was reported
+     to this node.
+
+     If gmplsTunnelErrorLastErrorType has the value noError(0), then
+     this object is not valid and should be ignored.
+
+     Note that entries in this table are not persistent over system
+     resets or re-initializations of the management system."
+::= { gmplsTunnelErrorEntry 2 }
+
+gmplsTunnelErrorReporterType OBJECT-TYPE
+   SYNTAX     InetAddressType
+   MAX-ACCESS read-only
+   STATUS  current
+   DESCRIPTION
+     "The address type of the error reported.
+
+      This object is used to aid in interpretation of
+      gmplsTunnelErrorReporter."
+::= { gmplsTunnelErrorEntry 3 }
+
+gmplsTunnelErrorReporter OBJECT-TYPE
+  SYNTAX  InetAddress
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The address of the node reporting the last error, or the address
+     of the resource (such as an interface) associated with the
+     error.
+
+     If gmplsTunnelErrorLastErrorType has the value noError(0), then
+     this object is not valid and should be ignored.
+
+     If gmplsTunnelErrorLastErrorType has the value unknown(1),
+     localConfiguration(4), localResources(5), or localOther(6),
+     this object MAY contain a zero value.
+
+     This object should be interpreted in the context of the value of
+     the object gmplsTunnelErrorReporterType."
+  REFERENCE
+    "1. Textual Conventions for Internet Network Addresses, RFC 4001,
+        section 4, Usage Hints."
+::= { gmplsTunnelErrorEntry 4 }
+
+gmplsTunnelErrorCode OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The primary error code associated with the last error.
+
+     The interpretation of this error code depends on the value of
+     gmplsTunnelErrorLastErrorType.  If the value of
+     gmplsTunnelErrorLastErrorType is noError(0), the value of this
+     object should be 0 and should be ignored.  If the value of
+     gmplsTunnelErrorLastErrorType is protocol(2), the error should
+     be interpreted in the context of the signaling protocol
+     identified by the mplsTunnelSignallingProto object."
+  REFERENCE
+    "1. Resource ReserVation Protocol -- Version 1 Functional
+        Specification, RFC 2205, section B.
+     2. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
+        section 7.3.
+     3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 13.1."
+::= { gmplsTunnelErrorEntry 5 }
+
+gmplsTunnelErrorSubcode OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The secondary error code associated with the last error and the
+     protocol used to signal this tunnel.  This value is interpreted
+     in the context of the value of gmplsTunnelErrorCode.
+     If the value of gmplsTunnelErrorLastErrorType is noError(0), the
+     value of this object should be 0 and should be ignored."
+  REFERENCE
+    "1. Resource ReserVation Protocol -- Version 1 Functional
+        Specification, RFC 2205, section B.
+     2. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
+        section 7.3.
+     3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 13.1. "
+::= { gmplsTunnelErrorEntry 6 }
+
+gmplsTunnelErrorTLVs OBJECT-TYPE
+  SYNTAX  OCTET STRING (SIZE(0..65535))
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The sequence of interface identifier TLVs reported with the
+     error by the protocol code.  The interpretation of the TLVs and
+     the encoding within the protocol are described in the
+     references.  A value of zero in the first octet indicates that no
+     TLVs are present."
+   REFERENCE
+    "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+        section 8.2."
+::= { gmplsTunnelErrorEntry 7 }
+
+gmplsTunnelErrorHelpString OBJECT-TYPE
+  SYNTAX  SnmpAdminString
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "A textual string containing information about the last error,
+     recovery actions, and support advice.  If there is no help string,
+     this object contains a zero length string.
+     If the value of gmplsTunnelErrorLastErrorType is noError(0),
+     this object should contain a zero length string, but may contain
+     a help string indicating that there is no error."
+::= { gmplsTunnelErrorEntry 8 }
+
+--
+-- Notifications
+--
+
+gmplsTunnelDown NOTIFICATION-TYPE
+OBJECTS  {
+  mplsTunnelAdminStatus,
+  mplsTunnelOperStatus,
+  gmplsTunnelErrorLastErrorType,
+  gmplsTunnelErrorReporterType,
+  gmplsTunnelErrorReporter,
+  gmplsTunnelErrorCode,
+  gmplsTunnelErrorSubcode
+}
+STATUS      current
+DESCRIPTION
+     "This notification is generated when an mplsTunnelOperStatus
+      object for a tunnel in the gmplsTunnelTable is about to enter
+      the down state from some other state (but not from the
+      notPresent state).  This other state is indicated by the
+      included value of mplsTunnelOperStatus.
+
+      The objects in this notification provide additional error
+      information that indicates the reason why the tunnel has
+
+      transitioned to down(2).
+
+      Note that an implementation MUST only issue one of
+      mplsTunnelDown and gmplsTunnelDown for any single event on a
+      single tunnel.  If the tunnel has an entry in the
+      gmplsTunnelTable, an implementation SHOULD use gmplsTunnelDown
+      for all tunnel-down events and SHOULD NOT use mplsTunnelDown.
+
+      This notification is subject to the control of
+      mplsTunnelNotificationEnable.  When that object is set
+      to false(2), then the notification must not be issued.
+
+      Further, this notification is also subject to
+      mplsTunnelNotificationMaxRate.  That object indicates the
+      maximum number of notifications issued per second.  If events
+      occur more rapidly, the implementation may simply fail to emit
+      some notifications during that period, or may queue them until
+      an appropriate time.  The notification rate applies to the sum
+      of all notifications in the MPLS-TE-STD-MIB and
+      GMPLS-TE-STD-MIB modules applied across the whole of the
+      reporting device.
+
+      mplsTunnelOperStatus, mplsTunnelAdminStatus, mplsTunnelDown,
+      mplsTunnelNotificationEnable, and mplsTunnelNotificationMaxRate
+      objects are found in MPLS-TE-STD-MIB."
+    REFERENCE
+      "1. Multiprotocol Label Switching (MPLS) Traffic Engineering
+          (TE) Management Information Base (MIB), RFC 3812."
+::= { gmplsTeNotifications 1 }
+
+gmplsTeGroups
+  OBJECT IDENTIFIER ::= { gmplsTeConformance 1 }
+
+gmplsTeCompliances
+  OBJECT IDENTIFIER ::= { gmplsTeConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+
+gmplsTeModuleFullCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+     "Compliance statement for agents that provide full support for
+      GMPLS-TE-STD-MIB.  Such devices can then be monitored and also
+      be configured using this MIB module.
+
+      The mandatory group has to be implemented by all LSRs that
+      originate, terminate, or act as transit for TE-LSPs/tunnels.
+      In addition, depending on the type of tunnels supported, other
+
+      groups become mandatory as explained below."
+
+  MODULE MPLS-TE-STD-MIB -- The MPLS-TE-STD-MIB, RFC 3812
+
+  MANDATORY-GROUPS {
+     mplsTunnelGroup,
+     mplsTunnelScalarGroup
+  }
+
+MODULE -- this module
+
+MANDATORY-GROUPS {
+  gmplsTunnelGroup,
+  gmplsTunnelScalarGroup
+}
+
+GROUP gmplsTunnelSignaledGroup
+  DESCRIPTION
+    "This group is mandatory for devices that support signaled
+     tunnel set up, in addition to gmplsTunnelGroup.  The following
+     constraints apply:
+         mplsTunnelSignallingProto should be at least read-only
+         returning a value of ldp(2) or rsvp(3)."
+
+GROUP gmplsTunnelOptionalGroup
+  DESCRIPTION
+    "Objects in this group are optional."
+
+GROUP gmplsTeNotificationGroup
+  DESCRIPTION
+    "This group is mandatory for those implementations that can
+     implement the notifications contained in this group."
+::= { gmplsTeCompliances 1 }
+
+-- Compliance requirement for read-only compliant implementations.
+
+gmplsTeModuleReadOnlyCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "Compliance requirement for implementations that only provide
+     read-only support for GMPLS-TE-STD-MIB.  Such devices can then be
+     monitored but cannot be configured using this MIB module."
+
+  MODULE -- this module
+
+-- The mandatory group has to be implemented by all LSRs that
+-- originate, terminate, or act as transit for TE-LSPs/tunnels.
+
+-- In addition, depending on the type of tunnels supported, other
+-- groups become mandatory as explained below.
+
+MANDATORY-GROUPS {
+  gmplsTunnelGroup,
+  gmplsTunnelScalarGroup
+}
+
+GROUP gmplsTunnelSignaledGroup
+  DESCRIPTION
+    "This group is mandatory for devices that support signaled
+     tunnel set up, in addition to gmplsTunnelGroup.  The following
+     constraints apply:
+         mplsTunnelSignallingProto should be at least read-only
+         returning a value of ldp(2) or rsvp(3)."
+
+GROUP gmplsTunnelOptionalGroup
+  DESCRIPTION
+    "Objects in this group are optional."
+
+GROUP gmplsTeNotificationGroup
+  DESCRIPTION
+    "This group is mandatory for those implementations that can
+     implement the notifications contained in this group."
+
+OBJECT gmplsTunnelUnnumIf
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelAttributes
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelLSPEncoding
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelSwitchingType
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelLinkProtection
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelGPid
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelSecondary
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelDirection
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Only forward(0) is required."
+
+OBJECT gmplsTunnelPathComp
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Only explicit(2) is required."
+
+OBJECT gmplsTunnelUpstreamNotifyRecipientType
+  SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+  MIN-ACCESS   read-only
+  DESCRIPTION  "Only unknown(0), ipv4(1), and ipv6(2) support
+                 is required."
+
+OBJECT gmplsTunnelUpstreamNotifyRecipient
+  SYNTAX      InetAddress (SIZE(0|4|16))
+  MIN-ACCESS  read-only
+  DESCRIPTION "An implementation is only required to support
+               unknown(0), ipv4(1), and ipv6(2) sizes."
+
+OBJECT gmplsTunnelSendResvNotifyRecipientType
+  SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+  MIN-ACCESS read-only
+  DESCRIPTION "Only unknown(0), ipv4(1), and ipv6(2) support
+               is required."
+
+OBJECT gmplsTunnelSendResvNotifyRecipient
+  SYNTAX      InetAddress (SIZE(0|4|16))
+  MIN-ACCESS read-only
+  DESCRIPTION "An implementation is only required to support
+               unknown(0), ipv4(1), and ipv6(2) sizes."
+
+OBJECT gmplsTunnelDownstreamNotifyRecipientType
+  SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+  MIN-ACCESS read-only
+  DESCRIPTION "Only unknown(0), ipv4(1), and ipv6(2) support
+               is required."
+
+OBJECT gmplsTunnelDownstreamNotifyRecipient
+  SYNTAX      InetAddress (SIZE(0|4|16))
+  MIN-ACCESS read-only
+  DESCRIPTION "An implementation is only required to support
+               unknown(0), ipv4(1), and ipv6(2) sizes."
+
+OBJECT gmplsTunnelSendPathNotifyRecipientType
+  SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+  MIN-ACCESS read-only
+  DESCRIPTION "Only unknown(0), ipv4(1), and ipv6(2) support
+               is required."
+
+OBJECT gmplsTunnelSendPathNotifyRecipient
+  SYNTAX      InetAddress (SIZE(0|4|16))
+  MIN-ACCESS read-only
+  DESCRIPTION "An implementation is only required to support
+               unknown(0), ipv4(1), and ipv6(2) sizes."
+
+OBJECT gmplsTunnelAdminStatusFlags
+  MIN-ACCESS read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelExtraParamsPtr
+  MIN-ACCESS read-only
+  DESCRIPTION
+    "Write access is not required."
+
+-- gmplsTunnelHopLabelStatuses has max access read-only
+
+OBJECT gmplsTunnelHopExplicitForwardLabel
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelHopExplicitForwardLabelPtr
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelHopExplicitReverseLabel
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+OBJECT gmplsTunnelHopExplicitReverseLabelPtr
+  MIN-ACCESS  read-only
+  DESCRIPTION
+    "Write access is not required."
+
+-- gmplsTunnelARHopTable
+-- all objects have max access read-only
+
+-- gmplsTunnelCHopTable
+-- all objects have max access read-only
+
+-- gmplsTunnelReversePerfTable
+-- all objects have max access read-only
+
+-- gmplsTunnelErrorTable
+-- all objects have max access read-only
+
+OBJECT gmplsTunnelErrorReporterType
+  SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+  DESCRIPTION "Only unknown(0), ipv4(1), and ipv6(2) support
+               is required."
+
+OBJECT gmplsTunnelErrorReporter
+  SYNTAX      InetAddress (SIZE(0|4|16))
+  DESCRIPTION "An implementation is only required to support
+               unknown(0), ipv4(1), and ipv6(2)."
+::= { gmplsTeCompliances 2 }
+
+gmplsTunnelGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsTunnelDirection,
+    gmplsTunnelReversePerfPackets,
+    gmplsTunnelReversePerfHCPackets,
+    gmplsTunnelReversePerfErrors,
+    gmplsTunnelReversePerfBytes,
+    gmplsTunnelReversePerfHCBytes,
+    gmplsTunnelErrorLastErrorType,
+    gmplsTunnelErrorLastTime,
+    gmplsTunnelErrorReporterType,
+    gmplsTunnelErrorReporter,
+    gmplsTunnelErrorCode,
+    gmplsTunnelErrorSubcode,
+    gmplsTunnelErrorTLVs,
+    gmplsTunnelErrorHelpString,
+    gmplsTunnelUnnumIf
+  }
+  STATUS  current
+  DESCRIPTION
+    "Necessary, but not sufficient, set of objects to implement
+     tunnels.  In addition, depending on the type of the tunnels
+     supported (for example, manually configured or signaled,
+     persistent or non-persistent, etc.), the
+     gmplsTunnelSignaledGroup group is mandatory."
+::= { gmplsTeGroups 1 }
+
+gmplsTunnelSignaledGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsTunnelAttributes,
+    gmplsTunnelLSPEncoding,
+    gmplsTunnelSwitchingType,
+    gmplsTunnelLinkProtection,
+    gmplsTunnelGPid,
+    gmplsTunnelSecondary,
+    gmplsTunnelPathComp,
+    gmplsTunnelUpstreamNotifyRecipientType,
+    gmplsTunnelUpstreamNotifyRecipient,
+    gmplsTunnelSendResvNotifyRecipientType,
+    gmplsTunnelSendResvNotifyRecipient,
+    gmplsTunnelDownstreamNotifyRecipientType,
+    gmplsTunnelDownstreamNotifyRecipient,
+    gmplsTunnelSendPathNotifyRecipientType,
+    gmplsTunnelSendPathNotifyRecipient,
+    gmplsTunnelAdminStatusFlags,
+    gmplsTunnelHopLabelStatuses,
+    gmplsTunnelHopExplicitForwardLabel,
+    gmplsTunnelHopExplicitForwardLabelPtr,
+    gmplsTunnelHopExplicitReverseLabel,
+    gmplsTunnelHopExplicitReverseLabelPtr
+  }
+  STATUS  current
+  DESCRIPTION
+    "Objects needed to implement signaled tunnels."
+::= { gmplsTeGroups 2 }
+
+gmplsTunnelScalarGroup OBJECT-GROUP
+  OBJECTS {
+    gmplsTunnelsConfigured,
+    gmplsTunnelsActive
+  }
+  STATUS  current
+  DESCRIPTION
+    "Scalar objects needed to implement MPLS tunnels."
+::= { gmplsTeGroups 3 }
+
+gmplsTunnelOptionalGroup OBJECT-GROUP
+  OBJECTS {
+
+    gmplsTunnelExtraParamsPtr,
+    gmplsTunnelARHopLabelStatuses,
+    gmplsTunnelARHopExplicitForwardLabel,
+    gmplsTunnelARHopExplicitForwardLabelPtr,
+    gmplsTunnelARHopExplicitReverseLabel,
+    gmplsTunnelARHopExplicitReverseLabelPtr,
+    gmplsTunnelARHopProtection,
+    gmplsTunnelCHopLabelStatuses,
+    gmplsTunnelCHopExplicitForwardLabel,
+    gmplsTunnelCHopExplicitForwardLabelPtr,
+    gmplsTunnelCHopExplicitReverseLabel,
+    gmplsTunnelCHopExplicitReverseLabelPtr
+  }
+  STATUS  current
+  DESCRIPTION
+    "The objects in this group are optional."
+::= { gmplsTeGroups 4 }
+
+gmplsTeNotificationGroup NOTIFICATION-GROUP
+  NOTIFICATIONS {
+     gmplsTunnelDown
+  }
+  STATUS  current
+  DESCRIPTION
+    "Set of notifications implemented in this module.  None is
+     mandatory."
+::= { gmplsTeGroups 5 }
+
+END
diff --git a/snmp_builder/mibs/GSMP-MIB.mib b/snmp_builder/mibs/GSMP-MIB.mib
new file mode 100644
index 0000000..b5a2e11
--- /dev/null
+++ b/snmp_builder/mibs/GSMP-MIB.mib
@@ -0,0 +1,1582 @@
+GSMP-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
+        Unsigned32, Integer32, mib-2
+               FROM SNMPv2-SMI                             -- [RFC2578]
+        RowStatus, TruthValue, TimeStamp,
+        StorageType, TEXTUAL-CONVENTION
+               FROM SNMPv2-TC                              -- [RFC2579]
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+               FROM SNMPv2-CONF                            -- [RFC2580]
+        ZeroBasedCounter32
+               FROM RMON2-MIB                              -- [RFC2021]
+        InterfaceIndex
+               FROM IF-MIB                                 -- [RFC2863]
+        AtmVcIdentifier, AtmVpIdentifier
+               FROM ATM-TC-MIB                             -- [RFC2514]
+        InetAddressType, InetAddress, InetPortNumber
+               FROM INET-ADDRESS-MIB ;                     -- [RFC3291]
+
+    gsmpMIB MODULE-IDENTITY
+        LAST-UPDATED "200205310000Z" -- May 31, 2002
+        ORGANIZATION "General Switch Management Protocol (gsmp)
+                      Working Group, IETF"
+        CONTACT-INFO
+               "WG Charter:
+               http://www.ietf.org/html.charters/gsmp-charter.html
+
+               WG-email:          gsmp@ietf.org
+               Subscribe:         gsmp-request@ietf.org
+               Email Archive:
+               ftp://ftp.ietf.org/ietf-mail-archive/gsmp/
+
+               WG Chair:    Avri Doria
+               Email:       avri@acm.org
+
+               WG Chair:    Kenneth Sundell
+               Email:       ksundell@nortelnetworks.com
+
+               Editor:      Hans Sjostrand
+               Email:       hans@ipunplugged.com
+
+               Editor:      Joachim Buerkle
+               Email:       joachim.buerkle@nortelnetworks.com
+
+               Editor:      Balaji Srinivasan
+               Email:       balaji@cplane.com"
+        DESCRIPTION
+            "This MIB contains managed object definitions for the
+            General Switch Management Protocol, GSMP, version 3"
+
+        REVISION       "200205310000Z"
+        DESCRIPTION "Initial Version, published as RFC 3295"
+    ::= { mib-2 98 }
+
+    gsmpNotifications              OBJECT IDENTIFIER ::= { gsmpMIB 0 }
+    gsmpObjects                    OBJECT IDENTIFIER ::= { gsmpMIB 1 }
+    gsmpNotificationsObjects       OBJECT IDENTIFIER ::= { gsmpMIB 2 }
+    gsmpConformance                OBJECT IDENTIFIER ::= { gsmpMIB 3 }
+
+    --**************************************************************
+    -- GSMP Textual Conventions
+    --**************************************************************
+
+    GsmpNameType ::= TEXTUAL-CONVENTION
+        STATUS         current
+        DESCRIPTION
+            "The Name is a 48-bit quantity.
+            A 48-bit IEEE 802 MAC address, if
+            available, may be used."
+        SYNTAX           OCTET STRING (SIZE(6))
+
+    GsmpPartitionType ::= TEXTUAL-CONVENTION
+       STATUS           current
+       DESCRIPTION
+           "Defining if partitions are used and how the partition id
+           is negotiated. "
+       SYNTAX           INTEGER {
+                                   noPartition(1),
+                                   fixedPartitionRequest(2),
+                                   fixedPartitionAssigned(3)
+                                   }
+
+    GsmpPartitionIdType ::= TEXTUAL-CONVENTION
+        STATUS         current
+        DESCRIPTION
+            "A 8-bit quantity. The format of the Partition ID is not
+            defined in GSMP. If desired, the Partition ID can be
+            divided into multiple sub-identifiers within a single
+
+            partition. For example: the Partition ID could be
+            subdivided into a 6-bit partition number and a 2-bit
+            sub-identifier which would allow a switch to support 64
+            partitions with 4 available IDs per partition."
+          SYNTAX         OCTET STRING (SIZE(1))
+
+    GsmpVersion ::= TEXTUAL-CONVENTION
+          STATUS          current
+          DESCRIPTION
+             "The version numbers defined for the GSMP protocol.
+              The version numbers used are defined in the
+              specifications of the respective protocol,
+              1 - GSMPv1.1 [RFC1987]
+              2 - GSMPv2.0 [RFC2397]
+              3 - GSMPv3   [RFC3292]
+              Other numbers may be defined for other versions
+              of the GSMP protocol."
+          SYNTAX          Unsigned32
+
+    GsmpLabelType ::= TEXTUAL-CONVENTION
+          STATUS         current
+          DESCRIPTION
+             "The label is structured as a TLV, a tuple, consisting of
+             a Type, a Length, and a Value. The structure is defined
+             in [RFC 3292]. The label TLV is encoded as a 2 octet type
+             field, followed by a 2 octet Length field, followed by a
+             variable length Value field.
+             Additionally, a label field can be composed of many stacked
+             labels that together constitute the label."
+          SYNTAX          OCTET STRING
+
+    --**************************************************************
+    -- GSMP Entity Objects
+    --**************************************************************
+
+    --
+    -- Switch Controller Entity table
+    --
+
+    gsmpControllerTable OBJECT-TYPE
+          SYNTAX          SEQUENCE OF GsmpControllerEntry
+          MAX-ACCESS      not-accessible
+          STATUS          current
+          DESCRIPTION
+             "This table represents the Switch Controller
+             Entities. An entry in this table needs to be configured
+             (created) before a GSMP session might be started."
+          ::= { gsmpObjects 1 }
+
+    gsmpControllerEntry OBJECT-TYPE
+          SYNTAX          GsmpControllerEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+              "An entry in the table showing
+              the data for a specific Switch Controller
+              Entity. If partitions are used, one entity
+              corresponds to one specific switch partition.
+              Depending of the encapsulation used,
+              a corresponding row in the gsmpAtmEncapTable or the
+              gsmpTcpIpEncapTable may have been created."
+        INDEX { gsmpControllerEntityId }
+        ::= { gsmpControllerTable 1 }
+
+    GsmpControllerEntry ::= SEQUENCE {
+        gsmpControllerEntityId                    GsmpNameType,
+        gsmpControllerMaxVersion                  GsmpVersion,
+        gsmpControllerTimer                       Unsigned32,
+        gsmpControllerPort                        Unsigned32,
+        gsmpControllerInstance                    Unsigned32,
+        gsmpControllerPartitionType               GsmpPartitionType,
+        gsmpControllerPartitionId                 GsmpPartitionIdType,
+        gsmpControllerDoResync                    TruthValue,
+        gsmpControllerNotificationMap             BITS,
+        gsmpControllerSessionState                INTEGER,
+        gsmpControllerStorageType                 StorageType,
+        gsmpControllerRowStatus                   RowStatus
+        }
+
+    gsmpControllerEntityId OBJECT-TYPE
+        SYNTAX          GsmpNameType
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+              "The Switch Controller Entity Id is unique
+              within the operational context of the device."
+        ::= { gsmpControllerEntry 1 }
+
+   gsmpControllerMaxVersion OBJECT-TYPE
+       SYNTAX          GsmpVersion
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+             "The max version number of the GSMP protocol being used
+             in this session. The version is negotiated by the
+             adjacency protocol."
+       DEFVAL { 3 }
+       ::= { gsmpControllerEntry 2 }
+
+   gsmpControllerTimer OBJECT-TYPE
+       SYNTAX          Unsigned32(1..255)
+       UNITS           "100ms"
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+           "The timer specifies the nominal time between
+           periodic adjacency protocol messages. It is a constant
+           for the duration of a GSMP session. The timer is
+           specified in units of 100ms."
+       DEFVAL { 10 }
+       ::= { gsmpControllerEntry 3 }
+
+   gsmpControllerPort OBJECT-TYPE
+       SYNTAX          Unsigned32
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+           "The local port number for the Switch Controller
+           Entity."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 3.1.2"
+       ::= { gsmpControllerEntry 4 }
+
+   gsmpControllerInstance OBJECT-TYPE
+       SYNTAX          Unsigned32(1..16777215)
+       MAX-ACCESS      read-only
+       STATUS          current
+       DESCRIPTION
+           "The instance number for the Switch Controller
+           Entity. The Instance number is a 24-bit number
+           that should be guaranteed to be unique within
+           the recent past and to change when the link
+           or node comes back up after going down. Zero is
+           not a valid instance number. "
+       ::= { gsmpControllerEntry 5 }
+
+   gsmpControllerPartitionType OBJECT-TYPE
+       SYNTAX          GsmpPartitionType
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+          "A controller can request the specific partition identifier
+          to the session by setting the Partition Type to
+          fixedPartitionRequest(2). A controller can let the switch
+          decide whether it wants to assign a fixed partition ID or
+
+          not, by setting the Partition Type to noPartition(1)."
+       ::= { gsmpControllerEntry 6 }
+
+   gsmpControllerPartitionId OBJECT-TYPE
+       SYNTAX           GsmpPartitionIdType
+       MAX-ACCESS       read-create
+       STATUS           current
+       DESCRIPTION
+           "The Id for the specific switch partition that this
+           Switch Controller is concerned with.
+           If partitions are not used or if the controller lets the
+           switch assigns Partition ID, i.e Partition Type =
+           noPartition(1), then this object is undefined."
+       ::= { gsmpControllerEntry 7 }
+
+   gsmpControllerDoResync OBJECT-TYPE
+       SYNTAX           TruthValue
+       MAX-ACCESS       read-create
+       STATUS           current
+       DESCRIPTION
+           "This object specifies whether the controller should
+           resynchronise or reset in case of loss of synchronisation.
+           If this object is set to true then the Controller should
+           resync with PFLAG=2 (recovered adjacency)."
+       DEFVAL { true }
+       ::= { gsmpControllerEntry 8 }
+
+   gsmpControllerNotificationMap OBJECT-TYPE
+       SYNTAX           BITS {
+                                   sessionDown(0),
+                                   sessionUp(1),
+                                   sendFailureIndication(2),
+                                   receivedFailureIndication(3),
+                                   portUpEvent(4),
+                                   portDownEvent(5),
+                                   invalidLabelEvent(6),
+                                   newPortEvent(7),
+                                   deadPortEvent(8),
+                                   adjacencyUpdateEvent(9)
+                             }
+       MAX-ACCESS       read-create
+       STATUS           current
+       DESCRIPTION
+           "This bitmap defines whether a corresponding SNMP
+           notification should be sent if a GSMP event is received
+           by the Switch Controller. If the bit is set to 1 a
+           notification should be sent. The handling and filtering of
+           the SNMP notifications are then further specified in the
+
+           SNMP notification originator application. "
+       DEFVAL {{ sessionDown, sessionUp,
+              sendFailureIndication, receivedFailureIndication }}
+       ::= { gsmpControllerEntry 9 }
+
+   gsmpControllerSessionState OBJECT-TYPE
+          SYNTAX          INTEGER {
+                                    null(1),
+                                    synsent(2),
+                                    synrcvd(3),
+                                    estab(4)
+                                   }
+          MAX-ACCESS      read-only
+          STATUS          current
+          DESCRIPTION
+             "The state for the existing or potential session that
+             this entity is concerned with.
+             The NULL state is returned if the proper encapsulation
+             data is not yet configured, if the row is not in active
+             status or if the session is in NULL state as defined in
+             the GSMP specification."
+          ::= { gsmpControllerEntry 10}
+
+   gsmpControllerStorageType OBJECT-TYPE
+           SYNTAX         StorageType
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "The storage type for this controller entity.
+             Conceptual rows having the value 'permanent' need not allow
+             write-access to any columnar objects in the row."
+          DEFVAL { nonVolatile }
+          ::= { gsmpControllerEntry 11 }
+
+   gsmpControllerRowStatus OBJECT-TYPE
+           SYNTAX         RowStatus
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "An object that allows entries in this table to
+              be created and deleted using the
+              RowStatus convention.
+              While the row is in active state it's not
+              possible to modify the value of any object
+              for that row except the gsmpControllerNotificationMap
+              and the gsmpControllerRowStatus objects."
+          ::= { gsmpControllerEntry 12 }
+
+    --
+    -- Switch Entity table
+    --
+
+    gsmpSwitchTable OBJECT-TYPE
+        SYNTAX         SEQUENCE OF GsmpSwitchEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This table represents the Switch
+             Entities. An entry in this table needs to be configured
+             (created) before a GSMP session might be started."
+        ::= { gsmpObjects 2 }
+
+    gsmpSwitchEntry OBJECT-TYPE
+        SYNTAX         GsmpSwitchEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "An entry in the table showing
+             the data for a specific Switch
+             Entity. If partitions are used, one entity
+             corresponds to one specific switch partition.
+             Depending of the encapsulation used,
+             a corresponding row in the gsmpAtmEncapTable or the
+             gsmpTcpIpEncapTable may have been created."
+        INDEX { gsmpSwitchEntityId }
+        ::= { gsmpSwitchTable 1 }
+
+    GsmpSwitchEntry ::= SEQUENCE {
+        gsmpSwitchEntityId                GsmpNameType,
+        gsmpSwitchMaxVersion              GsmpVersion,
+        gsmpSwitchTimer                   Unsigned32,
+        gsmpSwitchName                    GsmpNameType,
+        gsmpSwitchPort                    Unsigned32,
+        gsmpSwitchInstance                Unsigned32,
+        gsmpSwitchPartitionType           GsmpPartitionType,
+        gsmpSwitchPartitionId             GsmpPartitionIdType,
+        gsmpSwitchNotificationMap         BITS,
+        gsmpSwitchSwitchType              OCTET STRING,
+        gsmpSwitchWindowSize              Unsigned32,
+        gsmpSwitchSessionState            INTEGER,
+        gsmpSwitchStorageType             StorageType,
+        gsmpSwitchRowStatus               RowStatus
+        }
+
+    gsmpSwitchEntityId OBJECT-TYPE
+        SYNTAX         GsmpNameType
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "The Switch Entity Id is unique
+             within the operational context of the device. "
+        ::= { gsmpSwitchEntry 1 }
+
+   gsmpSwitchMaxVersion OBJECT-TYPE
+       SYNTAX          GsmpVersion
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+           "The max version number of the GSMP protocol being
+           supported by this Switch. The version is negotiated by
+           the adjacency protocol."
+       DEFVAL { 3 }
+       ::= { gsmpSwitchEntry 2 }
+
+   gsmpSwitchTimer OBJECT-TYPE
+       SYNTAX          Unsigned32(1..255)
+       UNITS           "100ms"
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+           "The timer specifies the nominal time between
+           periodic adjacency protocol messages. It is a constant
+           for the duration of a GSMP session. The timer is
+           specified in units of 100ms."
+       DEFVAL { 10 }
+       ::= { gsmpSwitchEntry 3 }
+
+   gsmpSwitchName OBJECT-TYPE
+       SYNTAX          GsmpNameType
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+           "The name of the Switch. The first three octets must be an
+           Organisationally Unique Identifier (OUI) that identifies
+           the manufacturer of the Switch. This is by default set to
+           the same value as the gsmpSwitchId object if not
+           separately specified. "
+       ::= {gsmpSwitchEntry 4 }
+
+   gsmpSwitchPort OBJECT-TYPE
+       SYNTAX          Unsigned32
+       MAX-ACCESS      read-create
+       STATUS          current
+       DESCRIPTION
+           "The local port number for this Switch Entity."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 3.1.2"
+       ::= { gsmpSwitchEntry 5 }
+
+   gsmpSwitchInstance OBJECT-TYPE
+       SYNTAX          Unsigned32(1..16777215)
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The instance number for the Switch Entity.
+           The Instance number is a 24-bit number
+           that should be guaranteed to be unique within
+           the recent past and to change when the link
+           or node comes back up after going down. Zero is
+           not a valid instance number."
+       ::= { gsmpSwitchEntry 6 }
+
+   gsmpSwitchPartitionType OBJECT-TYPE
+       SYNTAX         GsmpPartitionType
+       MAX-ACCESS     read-create
+       STATUS         current
+       DESCRIPTION
+           "A switch can assign the specific partition identifier to
+           the session by setting the Partition Type to
+           fixedPartitionAssigned(3). A switch can specify
+           that no partitions are handled in the session by setting
+           the Partition Type to noPartition(1)."
+       ::= { gsmpSwitchEntry 7 }
+
+   gsmpSwitchPartitionId OBJECT-TYPE
+       SYNTAX         GsmpPartitionIdType
+       MAX-ACCESS     read-create
+       STATUS         current
+       DESCRIPTION
+           "The Id for this specific switch partition that the switch
+           entity represents. If partitions are not used, i.e.
+           Partition Type = noPartition(1), then this object is
+           undefined."
+       ::= { gsmpSwitchEntry 8 }
+
+   gsmpSwitchNotificationMap OBJECT-TYPE
+       SYNTAX         BITS {
+                             sessionDown(0),
+                             sessionUp(1),
+                             sendFailureIndication(2),
+                             receivedFailureIndication(3),
+                             portUpEvent(4),
+                             portDownEvent(5),
+                             invalidLabelEvent(6),
+                             newPortEvent(7),
+                             deadPortEvent(8),
+                             adjacencyUpdateEvent(9)
+                          }
+       MAX-ACCESS     read-create
+       STATUS         current
+       DESCRIPTION
+           "This bitmap defines whether a corresponding SNMP
+           notification should be sent if an GSMP event is sent
+           by the Switch Entity. If the bit is set to 1 a
+           notification should be sent. The handling and filtering of
+           the SNMP notifications are then further specified in the
+           SNMP notification originator application. "
+       DEFVAL {{ sessionDown, sessionUp,
+              sendFailureIndication, receivedFailureIndication }}
+       ::= { gsmpSwitchEntry 9 }
+
+   gsmpSwitchSwitchType OBJECT-TYPE
+       SYNTAX           OCTET STRING (SIZE(2))
+       MAX-ACCESS       read-create
+       STATUS           current
+       DESCRIPTION
+           "A 16-bit field allocated by the manufacturer
+           of the switch. The Switch Type
+           identifies the product. When the Switch Type is combined
+           with the OUI from the Switch Name the product is
+           uniquely identified. "
+       ::= { gsmpSwitchEntry 10 }
+
+   gsmpSwitchWindowSize OBJECT-TYPE
+       SYNTAX           Unsigned32(1..65535)
+       MAX-ACCESS       read-create
+       STATUS           current
+       DESCRIPTION
+           "The maximum number of unacknowledged request messages
+           that may be transmitted by the controller without the
+           possibility of loss. This field is used to prevent
+           request messages from being lost in the switch because of
+           overflow in the receive buffer. The field is a hint to
+           the controller."
+       ::= { gsmpSwitchEntry 11 }
+
+   gsmpSwitchSessionState OBJECT-TYPE
+       SYNTAX           INTEGER {
+                                   null(1),
+                                   synsent(2),
+                                   synrcvd(3),
+                                   estab(4)
+                                  }
+       MAX-ACCESS       read-only
+       STATUS           current
+       DESCRIPTION
+           "The state for the existing or potential session that
+           this entity is concerned with.
+           The NULL state is returned if the proper encapsulation
+           data is not yet configured, if the row is not in active
+           status or if the session is in NULL state as defined in
+           the GSMP specification."
+          ::= { gsmpSwitchEntry 12}
+
+   gsmpSwitchStorageType OBJECT-TYPE
+           SYNTAX         StorageType
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "The storage type for this switch entity.
+             Conceptual rows having the value 'permanent' need not allow
+             write-access to any columnar objects in the row."
+          DEFVAL { nonVolatile }
+          ::= { gsmpSwitchEntry 13 }
+
+   gsmpSwitchRowStatus OBJECT-TYPE
+           SYNTAX         RowStatus
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "An object that allows entries in this table to
+              be created and deleted using the
+              RowStatus convention.
+              While the row is in active state it's not
+              possible to modify the value of any object
+              for that row except the gsmpSwitchNotificationMap
+              and the gsmpSwitchRowStatus objects."
+          ::= { gsmpSwitchEntry 14 }
+
+    --**************************************************************
+    -- GSMP Encapsulation Objects
+    --**************************************************************
+
+    --
+    -- GSMP ATM Encapsulation Table
+    --
+
+    gsmpAtmEncapTable OBJECT-TYPE
+          SYNTAX           SEQUENCE OF GsmpAtmEncapEntry
+          MAX-ACCESS       not-accessible
+          STATUS           current
+          DESCRIPTION
+              "This table contains the atm encapsulation data
+              for the Controller or Switch that uses atm aal5 as
+              encapsulation. "
+          ::= { gsmpObjects 3 }
+
+    gsmpAtmEncapEntry OBJECT-TYPE
+        SYNTAX          GsmpAtmEncapEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+             "An entry in the table showing
+             the encapsulation data for a specific
+             Switch Controller entity or Switch entity."
+        INDEX { gsmpAtmEncapEntityId }
+        ::= { gsmpAtmEncapTable 1 }
+
+    GsmpAtmEncapEntry ::= SEQUENCE {
+        gsmpAtmEncapEntityId              GsmpNameType,
+        gsmpAtmEncapIfIndex               InterfaceIndex,
+        gsmpAtmEncapVpi                   AtmVpIdentifier,
+        gsmpAtmEncapVci                   AtmVcIdentifier,
+        gsmpAtmEncapStorageType           StorageType,
+        gsmpAtmEncapRowStatus             RowStatus
+        }
+
+    gsmpAtmEncapEntityId OBJECT-TYPE
+        SYNTAX          GsmpNameType
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+             "The Controller Id or Switch Id that is unique
+             within the operational context of the device. "
+        ::= { gsmpAtmEncapEntry 1 }
+
+    gsmpAtmEncapIfIndex OBJECT-TYPE
+        SYNTAX         InterfaceIndex
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The interface index for the virtual channel over which
+             the GSMP session is established, i.e., the GSMP control
+             channel for LLC/SNAP encapsulated GSMP messages on an
+             ATM data link layer."
+        ::= { gsmpAtmEncapEntry 2 }
+
+    gsmpAtmEncapVpi OBJECT-TYPE
+        SYNTAX         AtmVpIdentifier
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             " The VPI value for the virtual channel over which the
+             GSMP session is established, i.e., the GSMP control
+             channel for LLC/SNAP encapsulated GSMP messages on an
+             ATM data link layer."
+        DEFVAL { 0 }
+           ::= { gsmpAtmEncapEntry 3 }
+
+    gsmpAtmEncapVci OBJECT-TYPE
+           SYNTAX         AtmVcIdentifier
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              " The VCI value for the virtual channel over which the
+              GSMP session is established, i.e., the GSMP control
+              channel for LLC/SNAP encapsulated GSMP messages on an
+              ATM data link layer."
+           DEFVAL { 15 }
+           ::= { gsmpAtmEncapEntry 4 }
+
+   gsmpAtmEncapStorageType OBJECT-TYPE
+           SYNTAX         StorageType
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "The storage type for this entry. It should have the same
+              value as the StorageType in the referring Switch
+              Controller entity or Switch entity."
+          DEFVAL { nonVolatile }
+          ::= { gsmpAtmEncapEntry 5 }
+
+   gsmpAtmEncapRowStatus OBJECT-TYPE
+           SYNTAX         RowStatus
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "An object that allows entries in this table to
+              be created and deleted using the
+              RowStatus convention.
+              While the row is in active state it's not
+              possible to modify the value of any object
+              for that row except the gsmpAtmEncapRowStatus object."
+          ::= { gsmpAtmEncapEntry 6 }
+
+    --
+    -- GSMP TCP/IP Encapsulation Table
+    --
+
+    gsmpTcpIpEncapTable OBJECT-TYPE
+          SYNTAX           SEQUENCE OF GsmpTcpIpEncapEntry
+          MAX-ACCESS       not-accessible
+          STATUS           current
+          DESCRIPTION
+              "This table contains the encapsulation data
+              for the Controller or Switch that uses TCP/IP as
+              encapsulation."
+        ::= { gsmpObjects 4 }
+
+    gsmpTcpIpEncapEntry OBJECT-TYPE
+        SYNTAX          GsmpTcpIpEncapEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+             "An entry in the table showing
+             the encapsulation data for a specific
+             Switch Controller entity or Switch entity."
+        INDEX { gsmpTcpIpEncapEntityId }
+        ::= { gsmpTcpIpEncapTable 1 }
+
+    GsmpTcpIpEncapEntry ::= SEQUENCE {
+        gsmpTcpIpEncapEntityId              GsmpNameType,
+        gsmpTcpIpEncapAddressType           InetAddressType,
+        gsmpTcpIpEncapAddress               InetAddress,
+        gsmpTcpIpEncapPortNumber            InetPortNumber,
+        gsmpTcpIpEncapStorageType           StorageType,
+        gsmpTcpIpEncapRowStatus             RowStatus
+        }
+
+    gsmpTcpIpEncapEntityId OBJECT-TYPE
+        SYNTAX          GsmpNameType
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+             "The Controller or Switch Id is unique
+             within the operational context of the device. "
+        ::= { gsmpTcpIpEncapEntry 1 }
+
+    gsmpTcpIpEncapAddressType OBJECT-TYPE
+        SYNTAX         InetAddressType
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The type of address in gsmpTcpIpEncapAddress."
+        ::= { gsmpTcpIpEncapEntry 2 }
+
+    gsmpTcpIpEncapAddress OBJECT-TYPE
+        SYNTAX         InetAddress
+        MAX-ACCESS     read-create
+        STATUS         current
+        DESCRIPTION
+             "The IPv4 or IPv6 address used for
+             the GSMP session peer."
+        ::= { gsmpTcpIpEncapEntry 3 }
+
+    gsmpTcpIpEncapPortNumber OBJECT-TYPE
+           SYNTAX         InetPortNumber
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "The TCP port number used for the TCP session
+              establishment to the GSMP peer."
+           DEFVAL { 6068 }
+           ::= { gsmpTcpIpEncapEntry 4 }
+
+   gsmpTcpIpEncapStorageType OBJECT-TYPE
+           SYNTAX         StorageType
+           MAX-ACCESS     read-create
+           STATUS         current
+           DESCRIPTION
+              "The storage type for this entry. It should have the same
+              value as the StorageType in the referring Switch
+              Controller entity or Switch entity."
+          DEFVAL { nonVolatile }
+          ::= { gsmpTcpIpEncapEntry 5 }
+
+    gsmpTcpIpEncapRowStatus OBJECT-TYPE
+          SYNTAX          RowStatus
+          MAX-ACCESS      read-create
+          STATUS          current
+          DESCRIPTION
+              "An object that allows entries in this table to
+              be created and deleted using the
+              RowStatus convention.
+              While the row is in active state it's not
+              possible to modify the value of any object
+              for that row except the gsmpTcpIpEncapRowStatus object."
+           ::= { gsmpTcpIpEncapEntry 6 }
+
+    --**************************************************************
+    -- GSMP Session Objects
+
+    --**************************************************************
+
+    --
+    -- GSMP Session table
+    --
+
+    gsmpSessionTable OBJECT-TYPE
+           SYNTAX          SEQUENCE OF GsmpSessionEntry
+           MAX-ACCESS      not-accessible
+           STATUS          current
+           DESCRIPTION
+              "This table represents the sessions between
+              Controller and Switch pairs. "
+        ::= { gsmpObjects 5 }
+
+    gsmpSessionEntry OBJECT-TYPE
+        SYNTAX         GsmpSessionEntry
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "An entry in the table showing
+             the session data for a specific Controller and
+             Switch pair. Also, statistics for this specific
+             session is shown."
+        INDEX { gsmpSessionThisSideId, gsmpSessionFarSideId }
+        ::= { gsmpSessionTable 1 }
+
+    GsmpSessionEntry ::= SEQUENCE {
+        gsmpSessionThisSideId                     GsmpNameType,
+        gsmpSessionFarSideId                      GsmpNameType,
+        gsmpSessionVersion                        GsmpVersion,
+        gsmpSessionTimer                          Integer32,
+        gsmpSessionPartitionId                    GsmpPartitionIdType,
+        gsmpSessionAdjacencyCount                 Unsigned32,
+        gsmpSessionFarSideName                    GsmpNameType,
+        gsmpSessionFarSidePort                    Unsigned32,
+        gsmpSessionFarSideInstance                Unsigned32,
+        gsmpSessionLastFailureCode                Unsigned32,
+        gsmpSessionDiscontinuityTime              TimeStamp,
+        gsmpSessionStartUptime                    TimeStamp,
+        gsmpSessionStatSentMessages               ZeroBasedCounter32,
+        gsmpSessionStatFailureInds                ZeroBasedCounter32,
+        gsmpSessionStatReceivedMessages           ZeroBasedCounter32,
+        gsmpSessionStatReceivedFailures           ZeroBasedCounter32,
+        gsmpSessionStatPortUpEvents               ZeroBasedCounter32,
+        gsmpSessionStatPortDownEvents             ZeroBasedCounter32,
+        gsmpSessionStatInvLabelEvents             ZeroBasedCounter32,
+        gsmpSessionStatNewPortEvents              ZeroBasedCounter32,
+        gsmpSessionStatDeadPortEvents             ZeroBasedCounter32,
+        gsmpSessionStatAdjUpdateEvents            ZeroBasedCounter32
+        }
+
+    gsmpSessionThisSideId OBJECT-TYPE
+        SYNTAX         GsmpNameType
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+             "This side ID uniquely identifies the entity that this
+             session relates to within the operational
+             context of the device. "
+        ::= { gsmpSessionEntry 1 }
+
+    gsmpSessionFarSideId OBJECT-TYPE
+        SYNTAX         GsmpNameType
+        MAX-ACCESS     not-accessible
+        STATUS         current
+        DESCRIPTION
+            "The Far side ID uniquely identifies the entity that this
+            session is established against. "
+        ::= { gsmpSessionEntry 2 }
+
+   gsmpSessionVersion OBJECT-TYPE
+       SYNTAX          GsmpVersion
+       MAX-ACCESS      read-only
+       STATUS          current
+       DESCRIPTION
+           "The version number of the GSMP protocol being used in
+           this session. The version is the result of the
+           negotiation by the adjacency protocol."
+       ::= { gsmpSessionEntry 3 }
+
+   gsmpSessionTimer OBJECT-TYPE
+       SYNTAX          Integer32
+       UNITS           "100ms"
+       MAX-ACCESS      read-only
+       STATUS          current
+       DESCRIPTION
+           "The timer specifies the time remaining until the
+           adjacency timer expires. The object could take negative
+           values since if no valid GSMP messages are
+           received in any period of time in excess of three times
+           the value of the Timer negotiated by the adjacency
+           protocol loss of synchronisation may be declared. The
+           timer is specified in units of 100ms."
+       ::= { gsmpSessionEntry 4 }
+
+   gsmpSessionPartitionId OBJECT-TYPE
+       SYNTAX          GsmpPartitionIdType
+       MAX-ACCESS      read-only
+       STATUS          current
+       DESCRIPTION
+           "The Partition Id for the specific switch partition that
+           this session is concerned with."
+       ::= { gsmpSessionEntry 5 }
+
+   gsmpSessionAdjacencyCount OBJECT-TYPE
+       SYNTAX          Unsigned32(1..255)
+       MAX-ACCESS      read-only
+       STATUS          current
+       DESCRIPTION
+           "This object specifies the current number of adjacencies
+           that are established with controllers and the switch
+           partition that is used for this session. The value
+           includes this session."
+       ::= { gsmpSessionEntry 6 }
+
+   gsmpSessionFarSideName OBJECT-TYPE
+       SYNTAX              GsmpNameType
+       MAX-ACCESS          read-only
+       STATUS              current
+       DESCRIPTION
+           "The name of the far side as advertised in the adjacency
+           message."
+       ::= {gsmpSessionEntry 7}
+
+   gsmpSessionFarSidePort OBJECT-TYPE
+       SYNTAX           Unsigned32
+       MAX-ACCESS       read-only
+       STATUS           current
+       DESCRIPTION
+           "The local port number of the link across which the
+           message is being sent."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 3.1.2"
+       ::= { gsmpSessionEntry 8 }
+
+   gsmpSessionFarSideInstance OBJECT-TYPE
+       SYNTAX           Unsigned32(1..16777215)
+       MAX-ACCESS       read-only
+       STATUS           current
+       DESCRIPTION
+           "The instance number used for the link during this
+           session. The Instance number is a 24-bit number
+           that should be guaranteed to be unique within
+
+           the recent past and to change when the link
+           or node comes back up after going down. Zero is not
+           a valid instance number."
+       ::= { gsmpSessionEntry 9 }
+
+   gsmpSessionLastFailureCode OBJECT-TYPE
+       SYNTAX           Unsigned32(0..255)
+       MAX-ACCESS       read-only
+       STATUS           current
+       DESCRIPTION
+           "This is the last failure code that was received over
+           this session. If no failure code have been received, the
+           value is zero."
+       ::= { gsmpSessionEntry 10 }
+
+   gsmpSessionDiscontinuityTime OBJECT-TYPE
+       SYNTAX         TimeStamp
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at
+           which one or more of this session's counters
+           suffered a discontinuity. If no such discontinuities have
+           occurred since then, this object contains the same
+           timestamp as gsmpSessionStartUptime ."
+        ::= { gsmpSessionEntry 11 }
+
+   gsmpSessionStartUptime OBJECT-TYPE
+       SYNTAX         TimeStamp
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           " The value of sysUpTime when the session came to
+           established state."
+       ::= { gsmpSessionEntry 12 }
+
+   gsmpSessionStatSentMessages OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of messages that have been sent in this
+           session. All GSMP messages pertaining to this session after
+           the session came to established state SHALL
+           be counted, also including adjacency protocol messages
+           and failure response messages.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+
+           happened."
+       ::= { gsmpSessionEntry 13 }
+
+   gsmpSessionStatFailureInds OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of messages that have been sent with a
+           failure indication in this session. Warning messages
+           SHALL NOT be counted.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 12.1"
+       ::= { gsmpSessionEntry 14 }
+
+   gsmpSessionStatReceivedMessages OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of messages that have been received in
+           this session. All legal GSMP messages pertaining to this
+           session after the session came to established state SHALL
+           be counted, also including adjacency protocol messages
+           and failure response messages.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       ::= { gsmpSessionEntry 15 }
+
+   gsmpSessionStatReceivedFailures OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of messages that have been received in
+           this session with a failure indication. Warning messages
+           SHALL NOT be counted.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 12.1"
+       ::= { gsmpSessionEntry 16 }
+
+   gsmpSessionStatPortUpEvents OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of Port Up events that have been sent or
+           received on this session.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 9.1"
+       ::= { gsmpSessionEntry 17 }
+
+   gsmpSessionStatPortDownEvents OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of Port Down events that have been sent or
+           received on this session.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 9.2"
+       ::= { gsmpSessionEntry 18 }
+
+   gsmpSessionStatInvLabelEvents OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of Invalid label events that have been sent
+           or received on this session.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 9.3"
+       ::= { gsmpSessionEntry 19 }
+
+   gsmpSessionStatNewPortEvents OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of New Port events that have been sent or
+
+           received on this session.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+          "General Switch Management Protocol V3: Section 9.4"
+       ::= { gsmpSessionEntry 20 }
+
+   gsmpSessionStatDeadPortEvents OBJECT-TYPE
+       SYNTAX         ZeroBasedCounter32
+       MAX-ACCESS     read-only
+       STATUS         current
+       DESCRIPTION
+           "The number of Dead Port events that have been sent or
+           received on this session.
+           When the counter suffers any discontinuity, then
+           the gsmpSessionDiscontinuityTime object indicates when it
+           happened."
+       REFERENCE
+           "General Switch Management Protocol V3: Section 9.5"
+         ::= { gsmpSessionEntry 21 }
+
+   gsmpSessionStatAdjUpdateEvents OBJECT-TYPE
+         SYNTAX         ZeroBasedCounter32
+         MAX-ACCESS     read-only
+         STATUS         current
+         DESCRIPTION
+            "The number of Adjacency Update events that have been sent
+            or received on this session.
+            When the counter suffers any discontinuity, then
+            the gsmpSessionDiscontinuityTime object indicates when it
+            happened."
+         REFERENCE
+           "General Switch Management Protocol V3: Section 9.6"
+         ::= { gsmpSessionEntry 22 }
+
+   -- **************************************************************
+   -- GSMP Notifications
+   -- **************************************************************
+
+   --
+   -- Notification objects
+   --
+
+   gsmpEventPort OBJECT-TYPE
+         SYNTAX         Unsigned32
+         MAX-ACCESS     accessible-for-notify
+         STATUS         current
+         DESCRIPTION
+            "This object specifies the Port Number that is
+            carried in this event."
+         ::= { gsmpNotificationsObjects 1 }
+
+   gsmpEventPortSessionNumber OBJECT-TYPE
+         SYNTAX         Unsigned32
+         MAX-ACCESS     accessible-for-notify
+         STATUS         current
+         DESCRIPTION
+            "This object specifies the Port Session Number that is
+            carried in this event."
+         ::= { gsmpNotificationsObjects 2 }
+
+   gsmpEventSequenceNumber OBJECT-TYPE
+         SYNTAX         Unsigned32
+         MAX-ACCESS     accessible-for-notify
+         STATUS         current
+         DESCRIPTION
+            "This object specifies the Event Sequence Number that is
+            carried in this event."
+         ::= { gsmpNotificationsObjects 3 }
+
+   gsmpEventLabel OBJECT-TYPE
+         SYNTAX          GsmpLabelType
+         MAX-ACCESS      accessible-for-notify
+         STATUS          current
+         DESCRIPTION
+            "This object specifies the Label that is
+            carried in this event."
+         ::= { gsmpNotificationsObjects 4 }
+
+   --
+   -- Notifications
+   --
+
+    gsmpSessionDown NOTIFICATION-TYPE
+         OBJECTS {
+                   gsmpSessionStartUptime,
+                   gsmpSessionStatSentMessages,
+                   gsmpSessionStatFailureInds,
+                   gsmpSessionStatReceivedMessages,
+                   gsmpSessionStatReceivedFailures,
+                   gsmpSessionStatPortUpEvents,
+                   gsmpSessionStatPortDownEvents,
+                   gsmpSessionStatInvLabelEvents,
+                   gsmpSessionStatNewPortEvents,
+                   gsmpSessionStatDeadPortEvents,
+                   gsmpSessionStatAdjUpdateEvents
+                   }
+          STATUS current
+          DESCRIPTION
+              "When it has been enabled, this notification is
+              generated whenever a session is taken down, regardless
+              of whether the session went down normally or not.
+              Its purpose is to allow a management application
+              (primarily an accounting application) that is
+              monitoring the session statistics to receive the final
+              values of these counters, so that the application can
+              properly account for the amounts the counters were
+              incremented since the last time the application polled
+              them. The gsmpSessionStartUptime object provides the
+              total amount of time that the session was active.
+
+              This notification is not a substitute for polling the
+              session statistic counts. In particular, the count
+              values reported in this notification cannot be assumed
+             to be the complete totals for the life of the session,
+             since they may have wrapped while the
+             session was up.
+
+             The session to which this notification
+             applies is identified by the gsmpSessionThisSideId and
+             gsmpSessionFarSideId which could be inferred from the
+             Object Identifiers of the objects contained in the
+             notification.
+             An instance of this notification will contain exactly
+             one instance of each of its objects, and these objects
+             will all belong to the same conceptual row of the
+             gsmpSessionTable."
+    ::= { gsmpNotifications 1 }
+
+    gsmpSessionUp NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionFarSideInstance
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when new session is established.
+
+            The new session is identified by the gsmpSessionThisSideId
+            and gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionFarSideInstance object
+
+            contained in the notification."
+    ::= { gsmpNotifications 2 }
+
+    gsmpSentFailureInd NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionLastFailureCode,
+                  gsmpSessionStatFailureInds
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when a message with a failure indication was
+            sent.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatFailureInds. The
+            gsmpSessionLastFailureCode contains the failure
+            reason.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifiers of the objects contained in the
+            notification."
+    ::= { gsmpNotifications 3 }
+
+    gsmpReceivedFailureInd NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionLastFailureCode,
+                  gsmpSessionStatReceivedFailures
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generate when a message with a failure indication
+            is received.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatReceivedFailures. The
+            gsmpSessionLastFailureCode contains the failure
+            reason.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifiers of the objects contained in the
+            notification."
+    ::= { gsmpNotifications 4 }
+
+    gsmpPortUpEvent NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionStatPortUpEvents,
+                  gsmpEventPort,
+                  gsmpEventPortSessionNumber,
+                  gsmpEventSequenceNumber
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when a Port Up Event occurs.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatPortUpEvents.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionStatPortUpEvents
+            object contained in the notification."
+    ::= { gsmpNotifications 5 }
+
+    gsmpPortDownEvent NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionStatPortDownEvents,
+                  gsmpEventPort,
+                  gsmpEventPortSessionNumber,
+                  gsmpEventSequenceNumber
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when a Port Down Event occurs.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatPortDownEvents.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionStatPortDownEvents
+            object contained in the notification."
+    ::= { gsmpNotifications 6 }
+
+    gsmpInvalidLabelEvent NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionStatInvLabelEvents,
+                  gsmpEventPort,
+                  gsmpEventLabel,
+                  gsmpEventSequenceNumber
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when an Invalid Label Event occurs.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatInvLabelEvents.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionStatInvLabelEvents
+            object contained in the notification."
+    ::= { gsmpNotifications 7 }
+
+    gsmpNewPortEvent NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionStatNewPortEvents,
+                  gsmpEventPort,
+                  gsmpEventPortSessionNumber,
+                  gsmpEventSequenceNumber
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when a New Port Event occurs.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatNewPortEvents.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionStatNewPortEvents
+            object contained in the notification."
+    ::= { gsmpNotifications 8 }
+
+    gsmpDeadPortEvent NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionStatDeadPortEvents,
+                  gsmpEventPort,
+                  gsmpEventPortSessionNumber,
+                  gsmpEventSequenceNumber
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when a Dead Port Event occurs.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatDeadPortEvents.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionStatDeadPortEvents
+            object contained in the notification."
+    ::= { gsmpNotifications 9 }
+
+    gsmpAdjacencyUpdateEvent NOTIFICATION-TYPE
+        OBJECTS {
+                  gsmpSessionAdjacencyCount,
+                  gsmpSessionStatAdjUpdateEvents,
+                  gsmpEventSequenceNumber
+                  }
+        STATUS current
+        DESCRIPTION
+            "When it has been enabled, this notification is
+            generated when an Adjacency Update Event occurs.
+
+            The gsmpSessionAdjacencyCount contains the new value of
+            the number of adjacencies
+            that are established with controllers and the switch
+            partition that is used for this session.
+
+            The notification indicates a change in the value of
+            gsmpSessionStatAdjUpdateEvents.
+
+            The session to which this notification
+            applies is identified by the gsmpSessionThisSideId and
+            gsmpSessionFarSideId which could be inferred from the
+            Object Identifier of the gsmpSessionAdjacencyCount
+            or the gsmpSessionStatAdjUpdateEvents object contained
+            in the notification."
+    ::= { gsmpNotifications 10 }
+
+    --**************************************************************
+    -- GSMP Compliance
+    --**************************************************************
+
+    gsmpGroups            OBJECT IDENTIFIER ::= { gsmpConformance 1 }
+    gsmpCompliances       OBJECT IDENTIFIER ::= { gsmpConformance 2 }
+
+    gsmpModuleCompliance MODULE-COMPLIANCE
+        STATUS current
+        DESCRIPTION
+            "The compliance statement for agents that support
+            the GSMP MIB."
+        MODULE -- this module
+        MANDATORY-GROUPS { gsmpGeneralGroup
+                            }
+        GROUP gsmpControllerGroup
+        DESCRIPTION
+            "This group is mandatory for all Switch
+            Controllers"
+
+        GROUP gsmpSwitchGroup
+        DESCRIPTION
+            "This group is mandatory for all Switches"
+
+        GROUP gsmpAtmEncapGroup
+        DESCRIPTION
+            "This group must be supported if ATM is used for GSMP
+            encapsulation. "
+
+        GROUP gsmpTcpIpEncapGroup
+        DESCRIPTION
+            "This group must be supported if TCP/IP is used for GSMP
+            encapsulation. "
+
+        OBJECT gsmpTcpIpEncapAddressType
+        SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                 ipv4z(3), ipv6z(4) }
+        DESCRIPTION
+           "An implementation is only required to support
+            'unknown(0)', and IPv4 addresses. Supporting addresses with
+            zone index or IPv6 addresses are optional. Defining
+            Internet addresses by using DNS domain names are not
+            allowed."
+
+        OBJECT gsmpTcpIpEncapAddress
+        SYNTAX InetAddress (SIZE(0|4|8|16|20))
+        DESCRIPTION
+           "An implementation is only required to support
+
+           IPv4 addresses. Supporting addresses with zone index or IPv6
+           addresses are optional."
+
+        GROUP gsmpNotificationObjectsGroup
+        DESCRIPTION
+            "This group must be supported if notifications
+            are supported. "
+
+        GROUP gsmpNotificationsGroup
+        DESCRIPTION
+            "This group must be supported if notifications
+            are supported. "
+        ::= { gsmpCompliances 1 }
+
+    -- units of conformance
+
+    gsmpGeneralGroup OBJECT-GROUP
+        OBJECTS {
+        gsmpSessionVersion,
+        gsmpSessionTimer,
+        gsmpSessionPartitionId,
+        gsmpSessionAdjacencyCount,
+        gsmpSessionFarSideName,
+        gsmpSessionFarSidePort,
+        gsmpSessionFarSideInstance,
+        gsmpSessionLastFailureCode,
+        gsmpSessionDiscontinuityTime,
+        gsmpSessionStartUptime,
+        gsmpSessionStatSentMessages,
+        gsmpSessionStatFailureInds,
+        gsmpSessionStatReceivedMessages,
+        gsmpSessionStatReceivedFailures,
+        gsmpSessionStatPortUpEvents,
+        gsmpSessionStatPortDownEvents,
+        gsmpSessionStatInvLabelEvents,
+        gsmpSessionStatNewPortEvents,
+        gsmpSessionStatDeadPortEvents,
+        gsmpSessionStatAdjUpdateEvents
+        }
+        STATUS current
+        DESCRIPTION
+             "Objects that apply to all GSMP implementations."
+        ::= { gsmpGroups 1 }
+
+    gsmpControllerGroup OBJECT-GROUP
+        OBJECTS {
+        gsmpControllerMaxVersion,
+        gsmpControllerTimer,
+        gsmpControllerPort,
+        gsmpControllerInstance,
+        gsmpControllerPartitionType,
+        gsmpControllerPartitionId,
+        gsmpControllerDoResync,
+        gsmpControllerNotificationMap,
+        gsmpControllerSessionState,
+        gsmpControllerStorageType,
+        gsmpControllerRowStatus
+        }
+       STATUS       current
+       DESCRIPTION
+             "Objects that apply GSMP implementations of
+             Switch Controllers."
+       ::= { gsmpGroups 2 }
+
+    gsmpSwitchGroup OBJECT-GROUP
+        OBJECTS {
+        gsmpSwitchMaxVersion,
+        gsmpSwitchTimer,
+        gsmpSwitchName,
+        gsmpSwitchPort,
+        gsmpSwitchInstance,
+        gsmpSwitchPartitionType,
+        gsmpSwitchPartitionId,
+        gsmpSwitchNotificationMap,
+        gsmpSwitchSwitchType,
+        gsmpSwitchWindowSize,
+        gsmpSwitchSessionState,
+        gsmpSwitchStorageType,
+        gsmpSwitchRowStatus
+        }
+       STATUS       current
+       DESCRIPTION
+             "Objects that apply GSMP implementations of
+             Switches."
+       ::= { gsmpGroups 3 }
+
+    gsmpAtmEncapGroup OBJECT-GROUP
+        OBJECTS {
+        gsmpAtmEncapIfIndex,
+        gsmpAtmEncapVpi,
+        gsmpAtmEncapVci,
+        gsmpAtmEncapStorageType,
+        gsmpAtmEncapRowStatus
+        }
+       STATUS       current
+       DESCRIPTION
+             "Objects that apply to GSMP implementations that
+             supports ATM for GSMP encapsulation."
+       ::= { gsmpGroups 4 }
+
+    gsmpTcpIpEncapGroup OBJECT-GROUP
+        OBJECTS {
+        gsmpTcpIpEncapAddressType,
+        gsmpTcpIpEncapAddress,
+        gsmpTcpIpEncapPortNumber,
+        gsmpTcpIpEncapStorageType,
+        gsmpTcpIpEncapRowStatus
+        }
+       STATUS       current
+       DESCRIPTION
+             "Objects that apply to GSMP implementations that
+             supports TCP/IP for GSMP encapsulation."
+       ::= { gsmpGroups 5 }
+
+     gsmpNotificationObjectsGroup OBJECT-GROUP
+        OBJECTS {
+        gsmpEventPort,
+        gsmpEventPortSessionNumber,
+        gsmpEventSequenceNumber,
+        gsmpEventLabel
+        }
+       STATUS       current
+       DESCRIPTION
+             "Objects that are contained in the notifications."
+       ::= { gsmpGroups 6 }
+
+    gsmpNotificationsGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+        gsmpSessionDown,
+        gsmpSessionUp,
+        gsmpSentFailureInd,
+        gsmpReceivedFailureInd,
+        gsmpPortUpEvent,
+        gsmpPortDownEvent,
+        gsmpInvalidLabelEvent,
+        gsmpNewPortEvent,
+        gsmpDeadPortEvent,
+        gsmpAdjacencyUpdateEvent
+        }
+       STATUS current
+       DESCRIPTION
+             "The notifications which indicate specific changes
+             in the value of objects gsmpSessionTable"
+       ::= { gsmpGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/HC-ALARM-MIB.mib b/snmp_builder/mibs/HC-ALARM-MIB.mib
new file mode 100644
index 0000000..17ec94b
--- /dev/null
+++ b/snmp_builder/mibs/HC-ALARM-MIB.mib
@@ -0,0 +1,707 @@
+HC-ALARM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+        Integer32, Counter32, Unsigned32
+                FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP,
+        NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+        RowStatus, VariablePointer, StorageType,
+        TEXTUAL-CONVENTION
+                FROM SNMPv2-TC
+        CounterBasedGauge64
+                FROM HCNUM-TC
+        rmon, OwnerString, rmonEventGroup
+                FROM RMON-MIB;
+
+hcAlarmMIB MODULE-IDENTITY
+    LAST-UPDATED    "200212160000Z"
+    ORGANIZATION    "IETF RMONMIB Working Group"
+    CONTACT-INFO
+            "        Andy Bierman
+                     Cisco Systems, Inc.
+                Tel: +1 408 527-3711
+
+             E-mail: abierman@cisco.com
+             Postal: 170 West Tasman Drive
+                     San Jose, CA USA 95134
+
+                     Keith McCloghrie
+                     Cisco Systems, Inc.
+                Tel: +1 408 526-5260
+             E-mail: kzm@cisco.com
+             Postal: 170 West Tasman Drive
+                     San Jose, CA USA 95134
+
+             Send comments to <rmonmib@ietf.org>
+             Mailing list subscription info:
+                 http://www.ietf.org/mailman/listinfo/rmonmib "
+    DESCRIPTION
+            "This module defines Remote Monitoring MIB extensions for
+             High Capacity Alarms.
+
+             Copyright (C) The Internet Society (2002). This version
+             of this MIB module is part of RFC 3434; see the RFC
+             itself for full legal notices."
+
+    REVISION        "200212160000Z"
+    DESCRIPTION
+            "Initial version of the High Capacity Alarm MIB module.
+             This version published as RFC 3434."
+    ::= { rmon 29 }
+
+hcAlarmObjects       OBJECT IDENTIFIER ::= { hcAlarmMIB 1 }
+hcAlarmNotifications OBJECT IDENTIFIER ::= { hcAlarmMIB 2 }
+hcAlarmConformance   OBJECT IDENTIFIER ::= { hcAlarmMIB 3 }
+
+hcAlarmControlObjects OBJECT IDENTIFIER ::= { hcAlarmObjects 1 }
+hcAlarmCapabilitiesObjects OBJECT IDENTIFIER
+                                        ::= { hcAlarmObjects 2 }
+
+--
+-- Textual Conventions
+--
+
+HcValueStatus ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "This data type indicates the validity and sign of the data
+            in associated object instances which represent the absolute
+            value of a high capacity numeric quantity.  Such an object
+            may be represented with one or more object instances. An
+            object of type HcValueStatus MUST be defined within the same
+
+            structure as the object(s) representing the high capacity
+            absolute value.
+
+            If the associated object instance(s) representing the high
+            capacity absolute value could not be accessed during the
+            sampling interval, and is therefore invalid, then the
+            associated HcValueStatus object will contain the value
+            'valueNotAvailable(1)'.
+
+            If the associated object instance(s) representing the high
+            capacity absolute value are valid and actual value of the
+            sample is greater than or equal to zero, then the associated
+            HcValueStatus object will contain the value
+            'valuePositive(2)'.
+
+            If the associated object instance(s) representing the high
+            capacity absolute value are valid and the actual value of
+            the sample is less than zero, then the associated
+            HcValueStatus object will contain the value
+            'valueNegative(3)'.  The associated absolute value should be
+            multiplied by -1 to obtain the true sample value."
+    SYNTAX INTEGER {
+        valueNotAvailable(1),
+        valuePositive(2),
+        valueNegative(3)
+    }
+
+--
+-- High Capacity Alarm Table
+--
+
+hcAlarmTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF HcAlarmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of entries for the configuration of high capacity
+            alarms."
+    ::= { hcAlarmControlObjects 1 }
+
+hcAlarmEntry OBJECT-TYPE
+    SYNTAX      HcAlarmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A conceptual row in the hcAlarmTable. Entries are usually
+            created in this table by management application action, but
+            may also be created by agent action as well."
+    INDEX { hcAlarmIndex }
+    ::= { hcAlarmTable 1 }
+
+HcAlarmEntry ::= SEQUENCE {
+    hcAlarmIndex                     Integer32,
+    hcAlarmInterval                  Integer32,
+    hcAlarmVariable                  VariablePointer,
+    hcAlarmSampleType                INTEGER,
+    hcAlarmAbsValue                  CounterBasedGauge64,
+    hcAlarmValueStatus               HcValueStatus,
+    hcAlarmStartupAlarm              INTEGER,
+    hcAlarmRisingThreshAbsValueLo    Unsigned32,
+    hcAlarmRisingThreshAbsValueHi    Unsigned32,
+    hcAlarmRisingThresholdValStatus  HcValueStatus,
+    hcAlarmFallingThreshAbsValueLo   Unsigned32,
+    hcAlarmFallingThreshAbsValueHi   Unsigned32,
+    hcAlarmFallingThresholdValStatus HcValueStatus,
+    hcAlarmRisingEventIndex          Integer32,
+    hcAlarmFallingEventIndex         Integer32,
+    hcAlarmValueFailedAttempts       Counter32,
+    hcAlarmOwner                     OwnerString,
+    hcAlarmStorageType               StorageType,
+    hcAlarmStatus                    RowStatus }
+
+hcAlarmIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An arbitrary integer index value used to uniquely identify
+            this high capacity alarm entry."
+    ::= { hcAlarmEntry 1 }
+
+hcAlarmInterval OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The interval in seconds over which the data is sampled and
+            compared with the rising and falling thresholds.  When
+            setting this variable, care should be taken in the case of
+            deltaValue sampling - the interval should be set short
+            enough that the sampled variable is very unlikely to
+            increase or decrease by more than 2^63 - 1 during a single
+            sampling interval.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 2 }
+
+hcAlarmVariable OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The object identifier of the particular variable to be
+            sampled.  Only variables that resolve to an ASN.1 primitive
+            type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
+            Gauge, or TimeTicks) may be sampled.
+
+            Because SNMP access control is articulated entirely in terms
+            of the contents of MIB views, no access control mechanism
+            exists that can restrict the value of this object to
+            identify only those objects that exist in a particular MIB
+            view.  Because there is thus no acceptable means of
+            restricting the read access that could be obtained through
+            the alarm mechanism, the probe must only grant write access
+            to this object in those views that have read access to all
+            objects on the probe.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 3 }
+
+hcAlarmSampleType OBJECT-TYPE
+    SYNTAX INTEGER {
+               absoluteValue(1),
+               deltaValue(2)
+           }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The method of sampling the selected variable and
+            calculating the value to be compared against the thresholds.
+            If the value of this object is absoluteValue(1), the value
+            of the selected variable will be compared directly with the
+            thresholds at the end of the sampling interval.  If the
+            value of this object is deltaValue(2), the value of the
+            selected variable at the last sample will be subtracted from
+            the current value, and the difference compared with the
+            thresholds.
+
+            If the associated hcAlarmVariable instance could not be
+            obtained at the previous sample interval, then a delta
+
+            sample is not possible, and the value of the associated
+            hcAlarmValueStatus object for this interval will be
+            valueNotAvailable(1).
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 4 }
+
+hcAlarmAbsValue OBJECT-TYPE
+    SYNTAX      CounterBasedGauge64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The absolute value (i.e., unsigned value) of the
+            hcAlarmVariable statistic during the last sampling period.
+            The value during the current sampling period is not made
+            available until the period is completed.
+
+            To obtain the true value for this sampling interval, the
+            associated instance of hcAlarmValueStatus must be checked,
+            and the value of this object adjusted as necessary.
+
+            If the MIB instance could not be accessed during the
+            sampling interval, then this object will have a value of
+            zero and the associated instance of hcAlarmValueStatus will
+            be set to 'valueNotAvailable(1)'."
+    ::= { hcAlarmEntry 5 }
+
+hcAlarmValueStatus OBJECT-TYPE
+    SYNTAX      HcValueStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object indicates the validity and sign of the data for
+            the hcAlarmAbsValue object, as described in the
+            HcValueStatus textual convention."
+    ::= { hcAlarmEntry 6 }
+
+hcAlarmStartupAlarm OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  risingAlarm(1),
+                  fallingAlarm(2),
+                  risingOrFallingAlarm(3)
+               }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The alarm that may be sent when this entry is first set to
+
+            active.  If the first sample after this entry becomes active
+            is greater than or equal to the rising threshold and this
+            object is equal to risingAlarm(1) or
+            risingOrFallingAlarm(3), then a single rising alarm will be
+            generated.  If the first sample after this entry becomes
+            valid is less than or equal to the falling threshold and
+            this object is equal to fallingAlarm(2) or
+            risingOrFallingAlarm(3), then a single falling alarm will be
+            generated.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 7 }
+
+hcAlarmRisingThreshAbsValueLo OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The lower 32 bits of the absolute value for threshold for
+            the sampled statistic.  The actual threshold value is
+            determined by the associated instances of the
+            hcAlarmRisingThreshAbsValueHi and
+            hcAlarmRisingThresholdValStatus objects, as follows:
+
+               ABS(threshold) = hcAlarmRisingThreshAbsValueLo +
+                     (hcAlarmRisingThreshAbsValueHi * 2^^32)
+
+            The absolute value of the threshold is adjusted as required,
+            as described in the HcValueStatus textual convention.  These
+            three object instances are conceptually combined to
+            represent the rising threshold for this entry.
+
+            When the current sampled value is greater than or equal to
+            this threshold, and the value at the last sampling interval
+            was less than this threshold, a single event will be
+            generated.  A single event will also be generated if the
+            first sample after this entry becomes valid is greater than
+            or equal to this threshold and the associated
+            hcAlarmStartupAlarm is equal to risingAlarm(1) or
+            risingOrFallingAlarm(3).
+
+            After a rising event is generated, another such event will
+            not be generated until the sampled value falls below this
+            threshold and reaches the threshold identified by the
+            hcAlarmFallingThreshAbsValueLo,
+            hcAlarmFallingThreshAbsValueHi, and
+            hcAlarmFallingThresholdValStatus objects.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 8 }
+
+hcAlarmRisingThreshAbsValueHi OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The upper 32 bits of the absolute value for threshold for
+            the sampled statistic.  The actual threshold value is
+            determined by the associated instances of the
+            hcAlarmRisingThreshAbsValueLo and
+            hcAlarmRisingThresholdValStatus objects, as follows:
+
+               ABS(threshold) = hcAlarmRisingThreshAbsValueLo +
+                     (hcAlarmRisingThreshAbsValueHi * 2^^32)
+
+            The absolute value of the threshold is adjusted as required,
+            as described in the HcValueStatus textual convention.  These
+            three object instances are conceptually combined to
+            represent the rising threshold for this entry.
+
+            When the current sampled value is greater than or equal to
+            this threshold, and the value at the last sampling interval
+            was less than this threshold, a single event will be
+            generated.  A single event will also be generated if the
+            first sample after this entry becomes valid is greater than
+            or equal to this threshold and the associated
+            hcAlarmStartupAlarm is equal to risingAlarm(1) or
+            risingOrFallingAlarm(3).
+
+            After a rising event is generated, another such event will
+            not be generated until the sampled value falls below this
+            threshold and reaches the threshold identified by the
+            hcAlarmFallingThreshAbsValueLo,
+            hcAlarmFallingThreshAbsValueHi, and
+            hcAlarmFallingThresholdValStatus objects.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 9 }
+
+hcAlarmRisingThresholdValStatus OBJECT-TYPE
+    SYNTAX      HcValueStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object indicates the sign of the data for the rising
+            threshold, as defined by the hcAlarmRisingThresAbsValueLo
+            and hcAlarmRisingThresAbsValueHi objects, as described in
+            the HcValueStatus textual convention.
+
+            The enumeration 'valueNotAvailable(1)' is not allowed, and
+            the associated hcAlarmStatus object cannot be equal to
+            'active(1)' if this object is set to this value.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 10 }
+
+hcAlarmFallingThreshAbsValueLo OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The lower 32 bits of the absolute value for threshold for
+            the sampled statistic.  The actual threshold value is
+            determined by the associated instances of the
+            hcAlarmFallingThreshAbsValueHi and
+            hcAlarmFallingThresholdValStatus objects, as follows:
+
+               ABS(threshold) = hcAlarmFallingThreshAbsValueLo +
+                     (hcAlarmFallingThreshAbsValueHi * 2^^32)
+
+            The absolute value of the threshold is adjusted as required,
+            as described in the HcValueStatus textual convention.  These
+            three object instances are conceptually combined to
+            represent the falling threshold for this entry.
+
+            When the current sampled value is less than or equal to this
+            threshold, and the value at the last sampling interval was
+            greater than this threshold, a single event will be
+            generated.  A single event will also be generated if the
+            first sample after this entry becomes valid is less than or
+            equal to this threshold and the associated
+            hcAlarmStartupAlarm is equal to fallingAlarm(2) or
+            risingOrFallingAlarm(3).
+
+            After a falling event is generated, another such event will
+            not be generated until the sampled value rises above this
+            threshold and reaches the threshold identified by the
+            hcAlarmRisingThreshAbsValueLo,
+            hcAlarmRisingThreshAbsValueHi, and
+            hcAlarmRisingThresholdValStatus objects.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 11 }
+
+hcAlarmFallingThreshAbsValueHi OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The upper 32 bits of the absolute value for threshold for
+            the sampled statistic.  The actual threshold value is
+            determined by the associated instances of the
+            hcAlarmFallingThreshAbsValueLo and
+            hcAlarmFallingThresholdValStatus objects, as follows:
+
+               ABS(threshold) = hcAlarmFallingThreshAbsValueLo +
+                     (hcAlarmFallingThreshAbsValueHi * 2^^32)
+
+            The absolute value of the threshold is adjusted as required,
+            as described in the HcValueStatus textual convention.  These
+            three object instances are conceptually combined to
+            represent the falling threshold for this entry.
+
+            When the current sampled value is less than or equal to this
+            threshold, and the value at the last sampling interval was
+            greater than this threshold, a single event will be
+            generated.  A single event will also be generated if the
+            first sample after this entry becomes valid is less than or
+            equal to this threshold and the associated
+            hcAlarmStartupAlarm is equal to fallingAlarm(2) or
+            risingOrFallingAlarm(3).
+
+            After a falling event is generated, another such event will
+            not be generated until the sampled value rises above this
+            threshold and reaches the threshold identified by the
+            hcAlarmRisingThreshAbsValueLo,
+            hcAlarmRisingThreshAbsValueHi, and
+            hcAlarmRisingThresholdValStatus objects.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 12 }
+
+hcAlarmFallingThresholdValStatus OBJECT-TYPE
+    SYNTAX      HcValueStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object indicates the sign of the data for the falling
+            threshold, as defined by the hcAlarmFallingThreshAbsValueLo
+            and hcAlarmFallingThreshAbsValueHi objects, as described in
+            the HcValueStatus textual convention.
+
+            The enumeration 'valueNotAvailable(1)' is not allowed, and
+            the associated hcAlarmStatus object cannot be equal to
+            'active(1)' if this object is set to this value.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 13 }
+
+hcAlarmRisingEventIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The index of the eventEntry that is used when a rising
+            threshold is crossed.  The eventEntry identified by a
+            particular value of this index is the same as identified by
+            the same value of the eventIndex object.  If there is no
+            corresponding entry in the eventTable, then no association
+            exists.  In particular, if this value is zero, no associated
+            event will be generated, as zero is not a valid event index.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 14 }
+
+hcAlarmFallingEventIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The index of the eventEntry that is used when a falling
+            threshold is crossed.  The eventEntry identified by a
+            particular value of this index is the same as identified by
+            the same value of the eventIndex object.  If there is no
+            corresponding entry in the eventTable, then no association
+            exists.  In particular, if this value is zero, no associated
+            event will be generated, as zero is not a valid event index.
+
+            This object may not be modified if the associated
+            hcAlarmStatus object is equal to active(1)."
+    ::= { hcAlarmEntry 15 }
+
+hcAlarmValueFailedAttempts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times the associated hcAlarmVariable instance
+            was polled on behalf of this hcAlarmEntry, (while in the
+            active state) and the value was not available.  This counter
+            may experience a discontinuity if the agent restarts,
+            indicated by the value of sysUpTime."
+    ::= { hcAlarmEntry 16 }
+
+hcAlarmOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The entity that configured this entry and is therefore
+            using the resources assigned to it."
+    ::= { hcAlarmEntry 17 }
+
+hcAlarmStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The type of non-volatile storage configured for this entry.
+            If this object is equal to 'permanent(4)', then the
+            associated hcAlarmRisingEventIndex and
+            hcAlarmFallingEventIndex objects must be writable."
+    ::= { hcAlarmEntry 18 }
+
+hcAlarmStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this row.
+
+            An entry MUST NOT exist in the active state unless all
+            objects in the entry have an appropriate value, as described
+            in the description clause for each writable object.
+
+            The hcAlarmStatus object may be modified if the associated
+            instance of this object is equal to active(1),
+            notInService(2), or notReady(3).  All other writable objects
+            may be modified if the associated instance of this object is
+            equal to notInService(2) or notReady(3)."
+    ::= { hcAlarmEntry 19 }
+
+--
+-- Capabilities
+--
+
+hcAlarmCapabilities OBJECT-TYPE
+    SYNTAX      BITS {
+       hcAlarmCreation(0),
+       hcAlarmNvStorage(1)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the high capacity alarm capabilities
+            supported by this agent.
+
+            If the 'hcAlarmCreation' BIT is set, then this agent allows
+            NMS applications to create entries in the hcAlarmTable.
+
+            If the 'hcAlarmNvStorage' BIT is set, then this agent allows
+            entries in the hcAlarmTable which will be recreated after a
+            system restart, as controlled by the hcAlarmStorageType
+            object."
+    ::= { hcAlarmCapabilitiesObjects 1 }
+
+--
+-- Notifications
+--
+
+hcAlarmNotifPrefix OBJECT IDENTIFIER
+      ::= { hcAlarmNotifications 0 }
+
+hcRisingAlarm NOTIFICATION-TYPE
+    OBJECTS  { hcAlarmVariable,
+               hcAlarmSampleType,
+               hcAlarmAbsValue,
+               hcAlarmValueStatus,
+               hcAlarmRisingThreshAbsValueLo,
+               hcAlarmRisingThreshAbsValueHi,
+               hcAlarmRisingThresholdValStatus,
+               hcAlarmRisingEventIndex }
+    STATUS   current
+    DESCRIPTION
+            "The SNMP notification that is generated when a high
+            capacity alarm entry crosses its rising threshold and
+            generates an event that is configured for sending SNMP
+            traps.
+
+            The hcAlarmEntry object instances identified in the OBJECTS
+
+            clause are from the entry that causes this notification to
+            be generated."
+     ::= { hcAlarmNotifPrefix 1 }
+
+hcFallingAlarm NOTIFICATION-TYPE
+    OBJECTS { hcAlarmVariable,
+              hcAlarmSampleType,
+              hcAlarmAbsValue,
+              hcAlarmValueStatus,
+              hcAlarmFallingThreshAbsValueLo,
+              hcAlarmFallingThreshAbsValueHi,
+              hcAlarmFallingThresholdValStatus,
+              hcAlarmFallingEventIndex }
+    STATUS    current
+    DESCRIPTION
+            "The SNMP notification that is generated when a high
+            capacity alarm entry crosses its falling threshold and
+            generates an event that is configured for sending SNMP
+            traps.
+
+            The hcAlarmEntry object instances identified in the OBJECTS
+            clause are from the entry that causes this notification to
+            be generated."
+     ::= { hcAlarmNotifPrefix 2 }
+
+--
+-- Conformance Section
+--
+
+hcAlarmCompliances OBJECT IDENTIFIER ::= { hcAlarmConformance 1 }
+hcAlarmGroups      OBJECT IDENTIFIER ::= { hcAlarmConformance 2 }
+
+hcAlarmCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "Describes the requirements for conformance to the High
+            Capacity Alarm MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+                           hcAlarmControlGroup,
+                           hcAlarmCapabilitiesGroup,
+                           hcAlarmNotificationsGroup
+                         }
+
+    MODULE RMON-MIB
+        MANDATORY-GROUPS { rmonEventGroup }
+    ::= { hcAlarmCompliances 1 }
+
+-- Object Groups
+
+hcAlarmControlGroup OBJECT-GROUP
+    OBJECTS {
+             hcAlarmInterval,
+             hcAlarmVariable,
+             hcAlarmSampleType,
+             hcAlarmAbsValue,
+             hcAlarmValueStatus,
+             hcAlarmStartupAlarm,
+             hcAlarmRisingThreshAbsValueLo,
+             hcAlarmRisingThreshAbsValueHi,
+             hcAlarmRisingThresholdValStatus,
+             hcAlarmFallingThreshAbsValueLo,
+             hcAlarmFallingThreshAbsValueHi,
+             hcAlarmFallingThresholdValStatus,
+             hcAlarmRisingEventIndex,
+             hcAlarmFallingEventIndex,
+             hcAlarmValueFailedAttempts,
+             hcAlarmOwner,
+             hcAlarmStorageType,
+             hcAlarmStatus
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects used to configure entries for high
+            capacity alarm threshold monitoring purposes."
+    ::= { hcAlarmGroups 1 }
+
+hcAlarmCapabilitiesGroup OBJECT-GROUP
+    OBJECTS {
+             hcAlarmCapabilities
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects used to indicate an agent's high
+            capacity alarm threshold monitoring capabilities."
+    ::= { hcAlarmGroups 2 }
+
+hcAlarmNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+            hcRisingAlarm,
+            hcFallingAlarm
+    }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notifications to deliver information
+            related to a high capacity rising or falling threshold event
+
+            to a management application."
+    ::= { hcAlarmGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/HC-PerfHist-TC-MIB.mib b/snmp_builder/mibs/HC-PerfHist-TC-MIB.mib
new file mode 100644
index 0000000..9f60cd4
--- /dev/null
+++ b/snmp_builder/mibs/HC-PerfHist-TC-MIB.mib
@@ -0,0 +1,222 @@
+HC-PerfHist-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    Counter64,
+    Unsigned32,
+    Integer32,
+    mib-2                FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION   FROM SNMPv2-TC;
+
+hcPerfHistTCMIB MODULE-IDENTITY
+   LAST-UPDATED "200402030000Z" -- February 3, 2004
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+        Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+        Chair:     Mike Sneed
+                   Sand Channel Systems
+        Postal:    P.O.  Box 37324
+                   Raleigh NC 27627-7324
+                   USA
+        Email:     sneedmike@hotmail.com
+        Phone:     +1 206 600 7022
+
+        Co-editor: Bob Ray
+                   PESA Switching Systems, Inc.
+        Postal:    330-A Wynn Drive
+                   Huntsville, AL 35805
+                   USA
+        Email:     rray@pesa.com
+        Phone:     +1 256 726 9200 ext.  142
+
+        Co-editor: Rajesh Abbi
+                   Alcatel USA
+        Postal:    2301 Sugar Bush Road
+                   Raleigh, NC 27612-3339
+                   USA
+        Email:     Rajesh.Abbi@alcatel.com
+        Phone:     +1 919 850 6194
+        "
+    DESCRIPTION
+        "This MIB Module provides Textual Conventions to be
+         used by systems supporting 15 minute based performance
+         history counts that require high-capacity counts.
+
+         Copyright (C) The Internet Society (2004).  This version
+         of this MIB module is part of RFC 3705: see the RFC
+         itself for full legal notices."
+
+        REVISION "200402030000Z" -- February 3, 2004
+        DESCRIPTION "Initial version, published as RFC 3705."
+        ::= { mib-2 107 }
+
+HCPerfValidIntervals ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "The number of near end intervals for which data was
+
+       collected.  The value of an object with an
+       HCPerfValidIntervals syntax will be 96 unless the
+       measurement was (re-)started within the last 1440 minutes,
+       in which case the value will be the number of complete 15
+       minute intervals for which the agent has at least some data.
+       In certain cases (e.g., in the case where the agent is a
+       proxy) it is possible that some intervals are unavailable.
+       In this case, this interval is the maximum interval number
+       for which data is available."
+    SYNTAX   Integer32 (0..96)
+
+HCPerfInvalidIntervals ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "The number of near end intervals for which no data is
+       available.  The value of an object with an
+       HCPerfInvalidIntervals syntax will typically be zero except
+       in cases where the data for some intervals are not available
+       (e.g., in proxy situations)."
+    SYNTAX   Integer32 (0..96)
+
+HCPerfTimeElapsed ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "The number of seconds that have elapsed since the beginning
+       of the current measurement period.  If, for some reason,
+       such as an adjustment in the system's time-of-day clock or
+       the addition of a leap second, the duration of the current
+       interval exceeds the maximum value, the agent will return
+       the maximum value.
+
+       For 15 minute intervals, the range is limited to (0..899).
+       For 24 hour intervals, the range is limited to (0..86399)."
+    SYNTAX   Integer32 (0..86399)
+
+HCPerfIntervalThreshold ::= TEXTUAL-CONVENTION
+    STATUS   current
+    DESCRIPTION
+        "This convention defines a range of values that may be set
+        in a fault threshold alarm control.  As the number of
+        seconds in a 15-minute interval numbers at most 900,
+        objects of this type may have a range of 0...900, where the
+        value of 0 disables the alarm."
+    SYNTAX   Unsigned32 (0..900)
+
+HCPerfCurrentCount ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A gauge associated with a performance measurement in a
+         current 15 minute measurement interval.  The value of an
+         object with an HCPerfCurrentCount syntax starts from zero
+         and is increased when associated events occur, until the
+         end of the 15 minute interval.  At that time the value of
+         the gauge is stored in the first 15 minute history
+         interval, and the gauge is restarted at zero.  In the case
+         where the agent has no valid data available for the
+         current interval, the corresponding object instance is not
+         available and upon a retrieval request a corresponding
+         error message shall be returned to indicate that this
+         instance does not exist.
+
+         This count represents a non-negative integer, which
+         may increase or decrease, but shall never exceed 2^64-1
+         (18446744073709551615 decimal), nor fall below 0.  The
+         value of an object with HCPerfCurrentCount syntax
+         assumes its maximum value whenever the underlying count
+         exceeds 2^64-1.  If the underlying count subsequently
+         decreases below 2^64-1 (due, e.g., to a retroactive
+         adjustment as a result of entering or exiting unavailable
+         time), then the object's value also decreases.
+
+         Note that this TC is not strictly supported in SMIv2,
+         because the 'always increasing' and 'counter wrap'
+         semantics associated with the Counter64 base type are not
+         preserved.  It is possible that management applications
+         which rely solely upon the (Counter64) ASN.1 tag to
+         determine object semantics will mistakenly operate upon
+         objects of this type as they would for Counter64 objects.
+
+         This textual convention represents a limited and short-
+         term solution, and may be deprecated as a long term
+         solution is defined and deployed to replace it."
+    SYNTAX  Counter64
+
+HCPerfIntervalCount ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A gauge associated with a performance measurement in
+         a previous 15 minute measurement interval.  In the case
+         where the agent has no valid data available for a
+         particular interval, the corresponding object instance is
+         not available and upon a retrieval request a corresponding
+         error message shall be returned to indicate that this
+         instance does not exist.
+
+         Let X be an object with HCPerfIntervalCount syntax.
+
+         Let Y be an object with HCPerfCurrentCount syntax.
+         Let Z be an object with HCPerfTotalCount syntax.
+         Then, in a system supporting a history of n intervals with
+         X(1) and X(n) the most and least recent intervals
+         respectively, the following applies at the end of a 15
+         minute interval:
+
+            - discard the value of X(n)
+            - the value of X(i) becomes that of X(i-1)
+              for n >= i > 1
+            - the value of X(1) becomes that of Y.
+            - the value of Z, if supported, is adjusted.
+
+         This count represents a non-negative integer, which
+         may increase or decrease, but shall never exceed 2^64-1
+         (18446744073709551615 decimal), nor fall below 0.  The
+         value of an object with HCPerfIntervalCount syntax
+         assumes its maximum value whenever the underlying count
+         exceeds 2^64-1.  If the underlying count subsequently
+         decreases below 2^64-1 (due, e.g., to a retroactive
+         adjustment as a result of entering or exiting unavailable
+         time), then the value of the object also decreases.
+
+         Note that this TC is not strictly supported in SMIv2,
+         because the 'always increasing' and 'counter wrap'
+         semantics associated with the Counter64 base type are not
+         preserved.  It is possible that management applications
+         which rely solely upon the (Counter64) ASN.1 tag to
+         determine object semantics will mistakenly operate upon
+         objects of this type as they would for Counter64 objects.
+
+         This textual convention represents a limited and short-
+         term solution, and may be deprecated as a long term
+         solution is defined and deployed to replace it."
+    SYNTAX  Counter64
+
+HCPerfTotalCount ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A gauge representing the aggregate of previous valid 15
+         minute measurement intervals.  Intervals for which no
+         valid data was available are not counted.
+
+         This count represents a non-negative integer, which
+         may increase or decrease, but shall never exceed 2^64-1
+         (18446744073709551615 decimal), nor fall below 0.  The
+         value of an object with HCPerfTotalCount syntax
+         assumes its maximum value whenever the underlying count
+
+         exceeds 2^64-1.  If the underlying count subsequently
+         decreases below 2^64-1 (due, e.g., to a retroactive
+         adjustment as a result of entering or exiting unavailable
+         time), then the object's value also decreases.
+
+         Note that this TC is not strictly supported in SMIv2,
+         because the 'always increasing' and 'counter wrap'
+         semantics associated with the Counter64 base type are not
+         preserved.  It is possible that management applications
+         which rely solely upon the (Counter64) ASN.1 tag to
+         determine object semantics will mistakenly operate upon
+         objects of this type as they would for Counter64 objects.
+
+         This textual convention represents a limited and short-
+         term solution, and may be deprecated as a long term
+         solution is defined and deployed to replace it."
+    SYNTAX  Counter64
+END
diff --git a/snmp_builder/mibs/HC-RMON-MIB.mib b/snmp_builder/mibs/HC-RMON-MIB.mib
new file mode 100644
index 0000000..2bb7df3
--- /dev/null
+++ b/snmp_builder/mibs/HC-RMON-MIB.mib
@@ -0,0 +1,3149 @@
+HC-RMON-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
+        Gauge32, Counter64             FROM SNMPv2-SMI
+    RowStatus, TimeStamp               FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+    rmon, OwnerString, statistics, history, hosts, hostTopN, matrix,
+    etherStatsIndex, etherHistoryIndex, etherHistorySampleIndex,
+    hostIndex, hostAddress, hostTimeIndex, hostTimeCreationOrder,
+    hostTopNReport, hostTopNIndex,
+    matrixSDIndex, matrixSDSourceAddress, matrixSDDestAddress,
+    matrixDSIndex, matrixDSDestAddress, matrixDSSourceAddress,
+    capture, captureBufferControlIndex, captureBufferIndex
+                                    FROM RMON-MIB
+    protocolDirLocalIndex, protocolDistControlIndex,
+    protocolDist, hlHostControlIndex,
+    nlHost, nlHostTimeMark, nlHostAddress,
+    hlMatrixControlIndex, nlMatrix,
+    nlMatrixSDTimeMark, nlMatrixSDSourceAddress, nlMatrixSDDestAddress,
+    nlMatrixDSTimeMark, nlMatrixDSDestAddress, nlMatrixDSSourceAddress,
+    nlMatrixTopNControlIndex, nlMatrixTopNIndex,
+    alHost, alHostTimeMark,
+    alMatrix, alMatrixSDTimeMark, alMatrixDSTimeMark,
+    alMatrixTopNControlIndex, alMatrixTopNIndex,
+    usrHistory, usrHistoryControlIndex,
+    usrHistorySampleIndex, usrHistoryObjectIndex,
+    rmonConformance, ZeroBasedCounter32, probeConfig
+                                    FROM RMON2-MIB
+    ZeroBasedCounter64, CounterBasedGauge64
+                                    FROM HCNUM-TC;
+
+--  Remote Network Monitoring MIB
+
+hcRMON MODULE-IDENTITY
+    LAST-UPDATED "200205080000Z"    -- May 08, 2002
+    ORGANIZATION "IETF RMON MIB Working Group"
+    CONTACT-INFO
+        "Steve Waldbusser
+
+        Phone: +1-650-948-6500
+        Fax:   +1-650-745-0671
+        Email: waldbusser@nextbeacon.com
+
+        Andy Bierman
+        WG Chair
+        abierman@cisco.com
+
+        RMONMIB WG Mailing List
+        rmonmib@ietf.org
+        http://www.ietf.org/mailman/listinfo/rmonmib"
+    DESCRIPTION
+        "The MIB module for managing remote monitoring
+        device implementations. This MIB module
+        augments the original RMON MIB as specified in
+        RFC 2819 and RFC 1513 and RMON-2 MIB as specified in
+        RFC 2021."
+
+    REVISION "200205080000Z"    -- May 08, 2002
+    DESCRIPTION
+        "The original version of this MIB, published as RFC3273."
+    ::= { rmonConformance 5 }
+
+-- { rmon 1 } through { rmon 20 } are defined in RMON [RFC 2819] and
+-- the Token Ring RMON MIB [RFC 1513] and the RMON-2 MIB [RFC 2021].
+
+mediaIndependentStats  OBJECT IDENTIFIER ::= { rmon 21 }
+
+mediaIndependentTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MediaIndependentEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Media independent statistics for promiscuous monitoring of
+        any media.
+
+        The following table defines media independent statistics that
+        provide information for full and/or half-duplex links as well
+        as high capacity links.
+
+        For half-duplex links, or full-duplex-capable links operating
+        in half-duplex mode, the mediaIndependentIn* objects shall be
+        used and the mediaIndependentOut* objects shall not increment.
+
+        For full-duplex links, the mediaIndependentOut* objects shall
+        be present and shall increment. Whenever possible, the probe
+        should count packets moving away from the closest terminating
+        equipment as output packets. Failing that, the probe should
+        count packets moving away from the DTE as output packets."
+    ::= { mediaIndependentStats 1 }
+
+mediaIndependentEntry OBJECT-TYPE
+    SYNTAX     MediaIndependentEntry
+    MAX-ACCESS not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Media independent statistics for promiscuous monitoring of
+        any media."
+    INDEX { mediaIndependentIndex }
+    ::= { mediaIndependentTable 1 }
+
+MediaIndependentEntry ::= SEQUENCE {
+
+    mediaIndependentIndex                       Integer32,
+    mediaIndependentDataSource                  OBJECT IDENTIFIER,
+    mediaIndependentDropEvents                  Counter32,
+    mediaIndependentDroppedFrames               Counter32,
+    mediaIndependentInPkts                      Counter32,
+    mediaIndependentInOverflowPkts              Counter32,
+    mediaIndependentInHighCapacityPkts          Counter64,
+    mediaIndependentOutPkts                     Counter32,
+    mediaIndependentOutOverflowPkts             Counter32,
+    mediaIndependentOutHighCapacityPkts         Counter64,
+    mediaIndependentInOctets                    Counter32,
+    mediaIndependentInOverflowOctets            Counter32,
+    mediaIndependentInHighCapacityOctets        Counter64,
+    mediaIndependentOutOctets                   Counter32,
+    mediaIndependentOutOverflowOctets           Counter32,
+    mediaIndependentOutHighCapacityOctets       Counter64,
+    mediaIndependentInNUCastPkts                Counter32,
+    mediaIndependentInNUCastOverflowPkts        Counter32,
+    mediaIndependentInNUCastHighCapacityPkts    Counter64,
+    mediaIndependentOutNUCastPkts               Counter32,
+    mediaIndependentOutNUCastOverflowPkts       Counter32,
+    mediaIndependentOutNUCastHighCapacityPkts   Counter64,
+    mediaIndependentInErrors                    Counter32,
+    mediaIndependentOutErrors                   Counter32,
+    mediaIndependentInputSpeed                  Gauge32,
+    mediaIndependentOutputSpeed                 Gauge32,
+    mediaIndependentDuplexMode                  INTEGER,
+    mediaIndependentDuplexChanges               Counter32,
+    mediaIndependentDuplexLastChange            TimeStamp,
+    mediaIndependentOwner                       OwnerString,
+    mediaIndependentStatus                      RowStatus
+}
+
+mediaIndependentIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The value of this object uniquely identifies this
+        mediaIndependent entry."
+    ::= { mediaIndependentEntry 1 }
+
+mediaIndependentDataSource OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the source of the data that
+        this mediaIndependent entry is configured to analyze.  This
+        source can be any interface on this device.
+        In order to identify a particular interface, this
+        object shall identify the instance of the ifIndex
+        object, defined in RFC 1213 and RFC 2233 [16,17], for
+        the desired interface.  For example, if an entry
+        were to receive data from interface #1, this object
+        would be set to ifIndex.1.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the
+        identified interface.
+
+        An agent may or may not be able to tell if
+        fundamental changes to the media of the interface
+        have occurred and necessitate a deletion of
+        this entry.  For example, a hot-pluggable ethernet
+        card could be pulled out and replaced by a
+
+        token-ring card.  In such a case, if the agent has
+        such knowledge of the change, it is recommended that
+        it delete this entry.
+
+        This object may not be modified if the associated
+        mediaIndependentStatus object is equal to active(1)."
+    ::= { mediaIndependentEntry 2 }
+
+mediaIndependentDropEvents OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Events"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of events in which packets
+        were dropped by the probe due to lack of resources.
+        Note that this number is not necessarily the number of
+        packets dropped; it is just the number of times this
+        condition has been detected."
+    ::= { mediaIndependentEntry 3 }
+
+mediaIndependentDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames which were received by the probe
+        and therefore not accounted for in the
+        mediaIndependentDropEvents, but for which the probe chose not
+        to count for this entry for whatever reason.  Most often, this
+        event occurs when the probe is out of some resources and
+        decides to shed load from this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { mediaIndependentEntry 4 }
+
+mediaIndependentInPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received
+        on a half-duplex link or on the inbound connection of a
+        full-duplex link."
+    ::= { mediaIndependentEntry 5 }
+
+mediaIndependentInOverflowPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        mediaIndependentInPkts counter has overflowed."
+    ::= { mediaIndependentEntry 6 }
+
+mediaIndependentInHighCapacityPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received
+        on a half-duplex link or on the inbound connection of a
+        full-duplex link."
+    ::= { mediaIndependentEntry 7 }
+
+mediaIndependentOutPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received on a
+        full-duplex link in the direction of the network."
+    ::= { mediaIndependentEntry 8 }
+
+mediaIndependentOutOverflowPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        mediaIndependentOutPkts counter has overflowed."
+    ::= { mediaIndependentEntry 9 }
+
+mediaIndependentOutHighCapacityPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received on a
+        full-duplex link in the direction of the network."
+    ::= { mediaIndependentEntry 10 }
+
+mediaIndependentInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of octets of data (including those in bad
+        packets) received (excluding framing bits but including FCS
+        octets) on a half-duplex link or on the inbound connection of
+        a full-duplex link."
+    ::= { mediaIndependentEntry 11 }
+
+mediaIndependentInOverflowOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        mediaIndependentInOctets counter has overflowed."
+    ::= { mediaIndependentEntry 12 }
+
+mediaIndependentInHighCapacityOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "Octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of octets of data (including those in bad
+        packets) received (excluding framing bits but
+        including FCS octets) on a half-duplex link or on the inbound
+        connection of a full-duplex link."
+    ::= { mediaIndependentEntry 13 }
+
+mediaIndependentOutOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of octets of data (including those in bad
+        packets) received on a full-duplex link in the direction of
+        the network (excluding framing bits but including FCS
+        octets)."
+    ::= { mediaIndependentEntry 14 }
+
+mediaIndependentOutOverflowOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        mediaIndependentOutOctets counter has overflowed."
+    ::= { mediaIndependentEntry 15 }
+
+mediaIndependentOutHighCapacityOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "Octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of octets of data (including those in bad
+        packets) received on a full-duplex link in the direction of
+        the network (excluding framing bits but including FCS
+        octets)."
+    ::= { mediaIndependentEntry 16 }
+
+mediaIndependentInNUCastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of non-unicast packets (including bad
+        packets) received on a half-duplex link or on the inbound
+        connection of a full-duplex link."
+    ::= { mediaIndependentEntry 17 }
+
+mediaIndependentInNUCastOverflowPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        mediaIndependentInNUCastPkts counter has overflowed."
+    ::= { mediaIndependentEntry 18 }
+
+mediaIndependentInNUCastHighCapacityPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of non-unicast packets (including bad
+        packets) received on a half-duplex link or on the inbound
+        connection of a full-duplex link."
+    ::= { mediaIndependentEntry 19 }
+
+mediaIndependentOutNUCastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of non-unicast packets (including bad
+        packets) received on a full-duplex link in the direction of
+        the network."
+    ::= { mediaIndependentEntry 20 }
+
+mediaIndependentOutNUCastOverflowPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        mediaIndependentOutNUCastPkts counter has overflowed."
+    ::= { mediaIndependentEntry 21 }
+
+mediaIndependentOutNUCastHighCapacityPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "Packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of packets (including bad packets)
+        received on a full-duplex link in the direction of the
+        network."
+    ::= { mediaIndependentEntry 22 }
+
+mediaIndependentInErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS       "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of bad packets received on a
+        half-duplex link or on the inbound connection of a
+        full-duplex link."
+    ::= { mediaIndependentEntry 23 }
+
+mediaIndependentOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS       "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of bad packets received on a full-duplex
+        link in the direction of the network."
+    ::= { mediaIndependentEntry 24 }
+
+mediaIndependentInputSpeed OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Kilobits per Second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The nominal maximum speed in kilobits per second of this
+        half-duplex link or on the inbound connection of this
+        full-duplex link. If the speed is unknown or there is no fixed
+        maximum (e.g. a compressed link), this value shall be zero."
+    ::= { mediaIndependentEntry 25 }
+
+mediaIndependentOutputSpeed OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Kilobits per Second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The nominal maximum speed in kilobits per second of this
+        full-duplex link in the direction of the network. If the speed
+        is unknown, the link is half-duplex, or there is no fixed
+        maximum (e.g. a compressed link), this value shall be zero."
+    ::= { mediaIndependentEntry 26 }
+
+mediaIndependentDuplexMode OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    halfduplex(1),
+                    fullduplex(2)
+
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current mode of this link.
+
+        Note that if the link has full-duplex capabilities but
+        is operating in half-duplex mode, this value will be
+        halfduplex(1)."
+    ::= { mediaIndependentEntry 27 }
+
+mediaIndependentDuplexChanges OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Events"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times this link has changed from full-duplex
+        mode to half-duplex mode or from half-duplex mode to
+        full-duplex mode."
+    ::= { mediaIndependentEntry 28 }
+
+mediaIndependentDuplexLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime at the time the duplex status
+        of this link last changed."
+    ::= { mediaIndependentEntry 29 }
+
+mediaIndependentOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { mediaIndependentEntry 30 }
+
+mediaIndependentStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this media independent statistics entry."
+    ::= { mediaIndependentEntry 31 }
+
+-- High Capacity extensions for the etherStatsTable
+
+etherStatsHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF EtherStatsHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        etherStatsTable."
+    ::= { statistics 7 }
+
+etherStatsHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     EtherStatsHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        etherStatsEntry. These objects will be created by the agent
+        for all etherStatsEntries it deems appropriate."
+    INDEX { etherStatsIndex }
+    ::= { etherStatsHighCapacityTable 1 }
+
+EtherStatsHighCapacityEntry ::= SEQUENCE {
+    etherStatsHighCapacityOverflowPkts                 Counter32,
+    etherStatsHighCapacityPkts                         Counter64,
+    etherStatsHighCapacityOverflowOctets               Counter32,
+    etherStatsHighCapacityOctets                       Counter64,
+    etherStatsHighCapacityOverflowPkts64Octets         Counter32,
+    etherStatsHighCapacityPkts64Octets                 Counter64,
+    etherStatsHighCapacityOverflowPkts65to127Octets    Counter32,
+    etherStatsHighCapacityPkts65to127Octets            Counter64,
+    etherStatsHighCapacityOverflowPkts128to255Octets   Counter32,
+    etherStatsHighCapacityPkts128to255Octets           Counter64,
+    etherStatsHighCapacityOverflowPkts256to511Octets   Counter32,
+    etherStatsHighCapacityPkts256to511Octets           Counter64,
+    etherStatsHighCapacityOverflowPkts512to1023Octets  Counter32,
+    etherStatsHighCapacityPkts512to1023Octets          Counter64,
+    etherStatsHighCapacityOverflowPkts1024to1518Octets Counter32,
+    etherStatsHighCapacityPkts1024to1518Octets         Counter64
+}
+
+etherStatsHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherStatsPkts
+        counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 1 }
+
+etherStatsHighCapacityPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received."
+    ::= { etherStatsHighCapacityEntry 2 }
+
+etherStatsHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherStatsOctets
+        counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 3 }
+
+etherStatsHighCapacityOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets of data (including
+        those in bad packets) received on the
+        network (excluding framing bits but including
+        FCS octets).
+
+        If the network is half-duplex Fast Ethernet, this
+        object can be used as a reasonable estimate of
+        utilization. If greater precision is desired, the
+        etherStatsHighCapacityPkts and
+        etherStatsHighCapacityOctets objects should be sampled
+        before and after a common interval.  The differences
+        in the sampled values are Pkts and Octets,
+        respectively, and the number of seconds in the
+        interval is Interval.  These values
+        are used to calculate the Utilization as follows:
+
+                        Pkts * (.96 + .64) + (Octets * .08)
+        Utilization = -------------------------------------
+                                Interval * 10,000
+
+        The result of this equation is the value Utilization
+        which is the percent utilization of the ethernet
+        segment on a scale of 0 to 100 percent.
+
+        This table is not appropriate for monitoring full-duplex
+        ethernets. If the network is a full-duplex ethernet and the
+        mediaIndependentTable is monitoring that network, the
+        utilization can be calculated as follows:
+
+        1) Determine the utilization of the inbound path by using
+           the appropriate equation (for ethernet or fast ethernet)
+           to determine the utilization, substituting
+           mediaIndependentInPkts for etherStatsHighCapacityPkts, and
+           mediaIndependentInOctets for etherStatsHighCapacityOctets.
+           Call the resulting utilization inUtilization.
+
+        2) Determine the utilization of the outbound path by using
+           the same equation to determine the utilization, substituting
+           mediaIndependentOutPkts for etherStatsHighCapacityPkts, and
+           mediaIndependentOutOctets for etherStatsHighCapacityOctets.
+           Call the resulting utilization outUtilization.
+
+        3) The utilization is the maximum of inUtilization and
+           outUtilization. This metric shows the amount of percentage
+           of bandwidth that is left before congestion will be
+           experienced on the link."
+    ::= { etherStatsHighCapacityEntry 4 }
+
+etherStatsHighCapacityOverflowPkts64Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherStatsPkts64Octets
+        counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 5 }
+
+etherStatsHighCapacityPkts64Octets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were 64 octets in length
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsHighCapacityEntry 6 }
+
+etherStatsHighCapacityOverflowPkts65to127Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherStatsPkts65to127Octets
+        counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 7 }
+
+etherStatsHighCapacityPkts65to127Octets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        65 and 127 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsHighCapacityEntry 8 }
+
+etherStatsHighCapacityOverflowPkts128to255Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherStatsPkts128to255Octets
+        counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 9 }
+
+etherStatsHighCapacityPkts128to255Octets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        128 and 255 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsHighCapacityEntry 10 }
+
+etherStatsHighCapacityOverflowPkts256to511Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherStatsPkts256to511Octets
+        counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 11 }
+
+etherStatsHighCapacityPkts256to511Octets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        256 and 511 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsHighCapacityEntry 12 }
+
+etherStatsHighCapacityOverflowPkts512to1023Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated
+         etherStatsPkts512to1023Octets counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 13 }
+
+etherStatsHighCapacityPkts512to1023Octets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        512 and 1023 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsHighCapacityEntry 14 }
+
+etherStatsHighCapacityOverflowPkts1024to1518Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated
+        etherStatsPkts1024to1518Octets counter has overflowed."
+    ::= { etherStatsHighCapacityEntry 15 }
+
+etherStatsHighCapacityPkts1024to1518Octets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        1024 and 1518 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsHighCapacityEntry 16 }
+
+-- High Capacity extensions for the etherHistoryTable
+
+etherHistoryHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF EtherHistoryHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        etherHistoryTable."
+    ::= { history 6 }
+
+etherHistoryHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     EtherHistoryHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        etherHistoryEntry. These objects will be created by the agent
+        for all etherHistoryEntries associated with whichever
+        historyControlEntries it deems appropriate. (i.e., either all
+        etherHistoryHighCapacityEntries associated with a particular
+        historyControlEntry will be created, or none of them will
+        be.)"
+    INDEX { etherHistoryIndex, etherHistorySampleIndex }
+    ::= { etherHistoryHighCapacityTable 1 }
+
+EtherHistoryHighCapacityEntry ::= SEQUENCE {
+    etherHistoryHighCapacityOverflowPkts           Gauge32,
+    etherHistoryHighCapacityPkts                   CounterBasedGauge64,
+    etherHistoryHighCapacityOverflowOctets         Gauge32,
+    etherHistoryHighCapacityOctets                 CounterBasedGauge64
+}
+
+etherHistoryHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherHistoryPkts
+        Gauge overflowed during this sampling interval."
+    ::= { etherHistoryHighCapacityEntry 1 }
+
+etherHistoryHighCapacityPkts OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received during
+        this sampling interval."
+    ::= { etherHistoryHighCapacityEntry 2 }
+
+etherHistoryHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated etherHistoryOctets
+        counter has overflowed during this sampling interval."
+    ::= { etherHistoryHighCapacityEntry 3 }
+
+etherHistoryHighCapacityOctets OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets of data (including
+        those in bad packets) received on the
+        network (excluding framing bits but including
+        FCS octets) during this sampling interval."
+    ::= { etherHistoryHighCapacityEntry 4 }
+
+-- High Capacity Extensions for the hostTable
+
+hostHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        hostTable."
+    ::= { hosts 5 }
+
+hostHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     HostHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        hostEntry. These objects will be created by the agent
+        for all hostEntries associated with whichever
+        hostControlEntries it deems appropriate. (i.e., either all
+        hostHighCapacityEntries associated with a particular
+        hostControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hostIndex, hostAddress }
+    ::= { hostHighCapacityTable 1 }
+
+HostHighCapacityEntry ::= SEQUENCE {
+    hostHighCapacityInOverflowPkts    Counter32,
+    hostHighCapacityInPkts            Counter64,
+    hostHighCapacityOutOverflowPkts   Counter32,
+    hostHighCapacityOutPkts           Counter64,
+    hostHighCapacityInOverflowOctets  Counter32,
+    hostHighCapacityInOctets          Counter64,
+    hostHighCapacityOutOverflowOctets Counter32,
+    hostHighCapacityOutOctets         Counter64
+}
+
+hostHighCapacityInOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostInPkts
+        counter has overflowed."
+    ::= { hostHighCapacityEntry 1 }
+
+hostHighCapacityInPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted to
+        this address since it was added to the
+        hostHighCapacityTable."
+    ::= { hostHighCapacityEntry 2 }
+
+hostHighCapacityOutOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostOutPkts
+        counter has overflowed."
+    ::= { hostHighCapacityEntry 3 }
+
+hostHighCapacityOutPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets, including bad packets, transmitted
+        by this address since it was added to the
+        hostHighCapacityTable."
+    ::= { hostHighCapacityEntry 4 }
+
+hostHighCapacityInOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostInOctets
+        counter has overflowed."
+    ::= { hostHighCapacityEntry 5 }
+
+hostHighCapacityInOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted to this address
+        since it was added to the hostHighCapacityTable (excluding
+        framing bits but including FCS octets), except for
+
+        those octets in bad packets."
+    ::= { hostHighCapacityEntry 6 }
+
+hostHighCapacityOutOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostOutOctets
+        counter has overflowed."
+    ::= { hostHighCapacityEntry 7 }
+
+hostHighCapacityOutOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted by this address
+        since it was added to the hostHighCapacityTable (excluding
+        framing bits but including FCS octets), including
+        those octets in bad packets."
+    ::= { hostHighCapacityEntry 8 }
+
+-- High Capacity extensions for the hostTimeTable
+
+hostTimeHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostTimeHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        hostTimeTable."
+    ::= { hosts 6 }
+
+hostTimeHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     HostTimeHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        hostTimeEntry. These objects will be created by the agent
+        for all hostTimeEntries associated with whichever
+        hostControlEntries it deems appropriate. (i.e., either all
+        hostTimeHighCapacityEntries associated with a particular
+        hostControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hostTimeIndex, hostTimeCreationOrder }
+    ::= { hostTimeHighCapacityTable 1 }
+
+HostTimeHighCapacityEntry ::= SEQUENCE {
+    hostTimeHighCapacityInOverflowPkts    Counter32,
+    hostTimeHighCapacityInPkts            Counter64,
+    hostTimeHighCapacityOutOverflowPkts   Counter32,
+    hostTimeHighCapacityOutPkts           Counter64,
+    hostTimeHighCapacityInOverflowOctets  Counter32,
+    hostTimeHighCapacityInOctets          Counter64,
+    hostTimeHighCapacityOutOverflowOctets Counter32,
+    hostTimeHighCapacityOutOctets         Counter64
+}
+
+hostTimeHighCapacityInOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostTimeInPkts
+        counter has overflowed."
+    ::= { hostTimeHighCapacityEntry 1 }
+
+hostTimeHighCapacityInPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted to this address
+        since it was added to the hostTimeHighCapacityTable."
+    ::= { hostTimeHighCapacityEntry 2 }
+
+hostTimeHighCapacityOutOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostTimeOutPkts
+        counter has overflowed."
+    ::= { hostTimeHighCapacityEntry 3 }
+
+hostTimeHighCapacityOutPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets, including bad packets, transmitted
+        by this address since it was added to the
+        hostTimeHighCapacityTable."
+    ::= { hostTimeHighCapacityEntry 4 }
+
+hostTimeHighCapacityInOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostTimeInOctets
+        counter has overflowed."
+    ::= { hostTimeHighCapacityEntry 5 }
+
+hostTimeHighCapacityInOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted to this address
+        since it was added to the hostTimeHighCapacityTable
+        (excluding framing bits but including FCS octets),
+        except for those octets in bad packets."
+    ::= { hostTimeHighCapacityEntry 6 }
+
+hostTimeHighCapacityOutOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated hostTimeOutOctets
+        counter has overflowed."
+    ::= { hostTimeHighCapacityEntry 7 }
+
+hostTimeHighCapacityOutOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted by this address since
+        it was added to the hostTimeTable (excluding framing
+        bits but including FCS octets), including those
+
+        octets in bad packets."
+    ::= { hostTimeHighCapacityEntry 8 }
+
+-- High Capacity Extensions for the hostTopNTable
+
+hostTopNHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostTopNHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        hostTopNTable when hostTopNRateBase specifies a High Capacity
+        TopN Report."
+    ::= { hostTopN 3 }
+
+hostTopNHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     HostTopNHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        hostTopNEntry when hostTopNRateBase specifies a High Capacity
+        TopN Report. These objects will be created by the agent
+        for all hostTopNEntries associated with whichever
+        hostTopNControlEntries have a hostTopNRateBase that specify
+        a high capacity report."
+    INDEX { hostTopNReport, hostTopNIndex }
+    ::= { hostTopNHighCapacityTable 1 }
+
+HostTopNHighCapacityEntry ::= SEQUENCE {
+     hostTopNHighCapacityAddress        OCTET STRING,
+     hostTopNHighCapacityBaseRate       Gauge32,
+     hostTopNHighCapacityOverflowRate   Gauge32,
+     hostTopNHighCapacityRate           CounterBasedGauge64
+}
+
+hostTopNHighCapacityAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+          "The physical address of this host."
+    ::= { hostTopNHighCapacityEntry 1 }
+
+hostTopNHighCapacityBaseRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+          "The amount of change in the selected variable
+          during this sampling interval, modulo 2^32.  The
+          selected variable is this host's instance of the
+          object selected by hostTopNRateBase."
+    ::= { hostTopNHighCapacityEntry 2 }
+
+hostTopNHighCapacityOverflowRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+          "The amount of change in the selected variable
+          during this sampling interval, divided by 2^32, truncating
+          fractions (i.e., X DIV 2^32).  The selected variable is
+          this host's instance of the object selected by
+          hostTopNRateBase."
+    ::= { hostTopNHighCapacityEntry 3 }
+
+hostTopNHighCapacityRate OBJECT-TYPE
+     SYNTAX     CounterBasedGauge64
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+          "The amount of change in the selected variable
+          during this sampling interval.  The selected
+          variable is this host's instance of the object
+          selected by hostTopNRateBase."
+     ::= { hostTopNHighCapacityEntry 4 }
+
+-- High Capacity Extensions for the matrixSDTable
+
+matrixSDHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MatrixSDHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        matrixSDTable."
+    ::= { matrix 5 }
+
+matrixSDHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     MatrixSDHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        matrixSDEntry. These objects will be created by the agent
+
+        for all matrixSDEntries associated with whichever
+        matrixControlEntries it deems appropriate. (i.e., either all
+        matrixSDHighCapacityEntries associated with a particular
+        matrixControlEntry will be created, or none of them will
+        be.)"
+    INDEX { matrixSDIndex,
+            matrixSDSourceAddress, matrixSDDestAddress }
+    ::= { matrixSDHighCapacityTable 1 }
+
+MatrixSDHighCapacityEntry ::= SEQUENCE {
+    matrixSDHighCapacityOverflowPkts   Counter32,
+    matrixSDHighCapacityPkts           Counter64,
+    matrixSDHighCapacityOverflowOctets Counter32,
+    matrixSDHighCapacityOctets         Counter64
+}
+
+matrixSDHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated matrixSDPkts
+        counter has overflowed."
+    ::= { matrixSDHighCapacityEntry 1 }
+
+matrixSDHighCapacityPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets transmitted from the source
+        address to the destination address (this number
+        includes bad packets)."
+    ::= { matrixSDHighCapacityEntry 2 }
+
+matrixSDHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated matrixSDOctets
+        counter has overflowed."
+    ::= { matrixSDHighCapacityEntry 3 }
+
+matrixSDHighCapacityOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets (excluding framing bits but
+        including FCS octets) contained in all packets
+        transmitted from the source address to the
+        destination address."
+    ::= { matrixSDHighCapacityEntry 4 }
+
+-- High Capacity extensions for the matrixDSTable
+
+matrixDSHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MatrixDSHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        matrixDSTable."
+    ::= { matrix 6 }
+
+matrixDSHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     MatrixDSHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        matrixDSEntry. These objects will be created by the agent
+        for all matrixDSEntries associated with whichever
+        matrixControlEntries it deems appropriate. (i.e., either all
+        matrixDSHighCapacityEntries associated with a particular
+        matrixControlEntry will be created, or none of them will
+        be.)"
+    INDEX { matrixDSIndex,
+            matrixDSDestAddress, matrixDSSourceAddress }
+    ::= { matrixDSHighCapacityTable 1 }
+
+MatrixDSHighCapacityEntry ::= SEQUENCE {
+    matrixDSHighCapacityOverflowPkts   Counter32,
+    matrixDSHighCapacityPkts           Counter64,
+    matrixDSHighCapacityOverflowOctets Counter32,
+    matrixDSHighCapacityOctets         Counter64
+}
+
+matrixDSHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated matrixDSPkts
+        counter has overflowed."
+    ::= { matrixDSHighCapacityEntry 1 }
+
+matrixDSHighCapacityPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets transmitted from the source
+        address to the destination address (this number
+        includes bad packets)."
+    ::= { matrixDSHighCapacityEntry 2 }
+
+matrixDSHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated matrixDSOctets
+        counter has overflowed."
+    ::= { matrixDSHighCapacityEntry 3 }
+
+matrixDSHighCapacityOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets (excluding framing bits
+        but including FCS octets) contained in all packets
+        transmitted from the source address to the
+        destination address."
+    ::= { matrixDSHighCapacityEntry 4 }
+
+-- High Capacity extensions for the captureBufferTable
+
+captureBufferHighCapacityTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF CaptureBufferHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+
+        captureBufferTable."
+    ::= { capture 3 }
+
+captureBufferHighCapacityEntry OBJECT-TYPE
+    SYNTAX     CaptureBufferHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-1
+        captureBufferEntry. These objects will be created by the agent
+        for all captureBufferEntries associated with whichever
+        bufferControlEntries it deems appropriate. (i.e., either all
+        captureBufferHighCapacityEntries associated with a particular
+        bufferControlEntry will be created, or none of them will
+        be.)"
+    INDEX { captureBufferControlIndex, captureBufferIndex }
+    ::= { captureBufferHighCapacityTable 1 }
+
+CaptureBufferHighCapacityEntry ::= SEQUENCE {
+    captureBufferPacketHighCapacityTime     Integer32
+}
+
+captureBufferPacketHighCapacityTime  OBJECT-TYPE
+    SYNTAX      Integer32 (0..999999)
+    UNITS       "nanoseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of nanoseconds that had passed since this capture
+        buffer was first turned on when this packet was captured,
+        modulo 10^6.
+
+        This object is used in conjunction with the
+        captureBufferPacketTime object. This object returns the
+        number of nano-seconds to be added to to number of
+        milli-seconds obtained from the captureBufferPacketTime
+        object, to obtain more accurate inter packet arrival time."
+  ::= { captureBufferHighCapacityEntry 1 }
+
+-- High Capacity extensions for the protocolDistStatsTable
+
+protocolDistStatsHighCapacityTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF ProtocolDistStatsHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        protocolDistStatsTable."
+    ::= { protocolDist 3 }
+
+protocolDistStatsHighCapacityEntry OBJECT-TYPE
+    SYNTAX     ProtocolDistStatsHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        protocolDistStatsTable. These objects will be created by the
+        agent for all protocolDistStatsEntries associated with
+        whichever protocolDistControlEntries it deems appropriate.
+        (i.e., either all protocolDistStatsHighCapacityEntries
+        associated with a particular protocolDistControlEntry will be
+        created, or none of them will be.)"
+    INDEX { protocolDistControlIndex, protocolDirLocalIndex }
+    ::= { protocolDistStatsHighCapacityTable 1 }
+
+ProtocolDistStatsHighCapacityEntry ::= SEQUENCE {
+    protocolDistStatsHighCapacityOverflowPkts   ZeroBasedCounter32,
+    protocolDistStatsHighCapacityPkts           ZeroBasedCounter64,
+    protocolDistStatsHighCapacityOverflowOctets ZeroBasedCounter32,
+    protocolDistStatsHighCapacityOctets         ZeroBasedCounter64
+}
+
+protocolDistStatsHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated protocolDistStatsPkts
+        counter has overflowed."
+    ::= { protocolDistStatsHighCapacityEntry 1 }
+
+protocolDistStatsHighCapacityPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets without errors received of this
+        protocol type.  Note that this is the number of link-layer
+        packets, so if a single network-layer packet is fragmented
+        into several link-layer frames, this counter is incremented
+        several times."
+    ::= { protocolDistStatsHighCapacityEntry 2 }
+
+protocolDistStatsHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated protocolDistStatsOctets
+        counter has overflowed."
+    ::= { protocolDistStatsHighCapacityEntry 3 }
+
+protocolDistStatsHighCapacityOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets in packets received of this protocol
+        type since it was added to the protocolDistStatsTable
+        (excluding framing bits but including FCS octets), except for
+        those octets in packets that contained errors.
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { protocolDistStatsHighCapacityEntry 4 }
+
+-- High Capacity extensions for the nlHostTable.
+
+nlHostHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NlHostHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlHostTable."
+    ::= { nlHost 3 }
+
+nlHostHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     NlHostHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlHostEntry. These objects will be created by the agent
+        for all nlHostEntries associated with whichever
+        hlHostControlEntries it deems appropriate. (i.e., either all
+        nlHostHighCapacityEntries associated with a particular
+        hlHostControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hlHostControlIndex, nlHostTimeMark,
+            protocolDirLocalIndex, nlHostAddress }
+    ::= { nlHostHighCapacityTable 1 }
+
+NlHostHighCapacityEntry ::= SEQUENCE {
+    nlHostHighCapacityInOverflowPkts    ZeroBasedCounter32,
+    nlHostHighCapacityInPkts            ZeroBasedCounter64,
+    nlHostHighCapacityOutOverflowPkts   ZeroBasedCounter32,
+    nlHostHighCapacityOutPkts           ZeroBasedCounter64,
+    nlHostHighCapacityInOverflowOctets  ZeroBasedCounter32,
+    nlHostHighCapacityInOctets          ZeroBasedCounter64,
+    nlHostHighCapacityOutOverflowOctets ZeroBasedCounter32,
+    nlHostHighCapacityOutOctets         ZeroBasedCounter64
+}
+
+nlHostHighCapacityInOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlHostInPkts
+        counter has overflowed."
+    ::= { nlHostHighCapacityEntry 1 }
+
+nlHostHighCapacityInPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets without errors transmitted to
+        this address since it was added to the nlHostHighCapacityTable.
+        Note that this is the number of link-layer packets, so if a
+        single network-layer packet is fragmented into several
+        link-layer frames, this counter is incremented several times."
+    ::= { nlHostHighCapacityEntry 2 }
+
+nlHostHighCapacityOutOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlHostOutPkts
+        counter has overflowed."
+    ::= { nlHostHighCapacityEntry 3 }
+
+nlHostHighCapacityOutPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets without errors transmitted by
+        this address since it was added to the nlHostHighCapacityTable.
+        Note that this is the number of link-layer packets, so if a
+        single network-layer packet is fragmented into several
+        link-layer frames, this counter is incremented several times."
+    ::= { nlHostHighCapacityEntry 4 }
+
+nlHostHighCapacityInOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlHostInOctets
+        counter has overflowed."
+    ::= { nlHostHighCapacityEntry 5 }
+
+nlHostHighCapacityInOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted to this address
+        since it was added to the nlHostHighCapacityTable
+        (excluding framing bits but including FCS octets),
+        excluding those octets in packets that contained
+        errors.
+
+        Note this doesn't count just those octets in the
+        particular protocol frames, but includes the entire
+        packet that contained the protocol."
+    ::= { nlHostHighCapacityEntry 6 }
+
+nlHostHighCapacityOutOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlHostOutOctets
+        counter has overflowed."
+    ::= { nlHostHighCapacityEntry 7 }
+
+nlHostHighCapacityOutOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted by this address
+        since it was added to the nlHostHighCapacityTable
+        (excluding framing bits but including FCS octets),
+        excluding those octets in packets that contained
+        errors.
+
+        Note this doesn't count just those octets in the
+        particular protocol frames, but includes the entire
+        packet that contained the protocol."
+    ::= { nlHostHighCapacityEntry 8 }
+
+-- High Capacity extensions for the nlMatrixTable
+
+nlMatrixSDHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NlMatrixSDHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlMatrixTable."
+    ::= { nlMatrix 6 }
+
+nlMatrixSDHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     NlMatrixSDHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlMatrixEntry. These objects will be created by the agent
+        for all nlMatrixSDEntries associated with whichever
+        hlMatrixControlEntries it deems appropriate. (i.e., either all
+        nlMatrixSDHighCapacityEntries associated with a particular
+        hlMatrixControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hlMatrixControlIndex, nlMatrixSDTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixSDSourceAddress, nlMatrixSDDestAddress }
+    ::= { nlMatrixSDHighCapacityTable 1 }
+
+NlMatrixSDHighCapacityEntry ::= SEQUENCE {
+
+    nlMatrixSDHighCapacityOverflowPkts   ZeroBasedCounter32,
+    nlMatrixSDHighCapacityPkts           ZeroBasedCounter64,
+    nlMatrixSDHighCapacityOverflowOctets ZeroBasedCounter32,
+    nlMatrixSDHighCapacityOctets         ZeroBasedCounter64
+}
+
+nlMatrixSDHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlMatrixSDPkts
+        counter has overflowed."
+    ::= { nlMatrixSDHighCapacityEntry 1 }
+
+nlMatrixSDHighCapacityPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets without errors transmitted from the
+        source address to the destination address since this entry was
+        added to the nlMatrixSDHighCapacityTable.  Note that this is
+        the number of link-layer packets, so if a single network-layer
+        packet is fragmented into several link-layer frames, this
+        counter is incremented several times."
+    ::= { nlMatrixSDHighCapacityEntry 2 }
+
+nlMatrixSDHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlMatrixSDOctets
+        counter has overflowed."
+    ::= { nlMatrixSDHighCapacityEntry 3 }
+
+nlMatrixSDHighCapacityOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted from the source address to
+        the destination address since this entry was added to the
+
+        nlMatrixSDHighCapacityTable (excluding framing bits but
+        including FCS octets), excluding those octets in packets that
+        contained errors.
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { nlMatrixSDHighCapacityEntry 4 }
+
+-- High Capacity extensions for the nlMatrixDSTable
+
+nlMatrixDSHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NlMatrixDSHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlMatrixDSTable."
+    ::= { nlMatrix 7 }
+
+nlMatrixDSHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     NlMatrixDSHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlMatrixDSEntry. These objects will be created by the agent
+        for all nlMatrixDSEntries associated with whichever
+        hlmatrixControlEntries it deems appropriate. (i.e., either all
+        nlMatrixDSHighCapacityEntries associated with a particular
+        hlMatrixControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hlMatrixControlIndex, nlMatrixDSTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixDSDestAddress, nlMatrixDSSourceAddress }
+    ::= { nlMatrixDSHighCapacityTable 1 }
+
+NlMatrixDSHighCapacityEntry ::= SEQUENCE {
+    nlMatrixDSHighCapacityOverflowPkts   ZeroBasedCounter32,
+    nlMatrixDSHighCapacityPkts           ZeroBasedCounter64,
+    nlMatrixDSHighCapacityOverflowOctets ZeroBasedCounter32,
+    nlMatrixDSHighCapacityOctets         ZeroBasedCounter64
+}
+
+nlMatrixDSHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlMatrixDSPkts
+        counter has overflowed."
+    ::= { nlMatrixDSHighCapacityEntry 1 }
+
+nlMatrixDSHighCapacityPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets without errors transmitted from the
+        source address to the destination address since this entry was
+        added to the nlMatrixDSHighCapacityTable.  Note that this is
+        the number of link-layer packets, so if a single network-layer
+        packet is fragmented into several link-layer frames, this
+        counter is incremented several times."
+    ::= { nlMatrixDSHighCapacityEntry 2 }
+
+nlMatrixDSHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated nlMatrixDSOctets
+        counter has overflowed."
+    ::= { nlMatrixDSHighCapacityEntry 3 }
+
+nlMatrixDSHighCapacityOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted from the source address
+        to the destination address since this entry was added to the
+        nlMatrixDSHighCapacityTable (excluding framing bits but
+        including FCS octets), excluding those octets in packets that
+        contained errors.
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { nlMatrixDSHighCapacityEntry 4 }
+
+-- High Capacity extensions for the nlMatrixTopNTable
+
+nlMatrixTopNHighCapacityTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NlMatrixTopNHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlMatrixTopNTable when nlMatrixTopNControlRateBase specifies
+        a High Capacity TopN Report."
+    ::= { nlMatrix 8 }
+
+nlMatrixTopNHighCapacityEntry OBJECT-TYPE
+    SYNTAX     NlMatrixTopNHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        nlMatrixTopNEntry when nlMatrixTopNControlRateBase specifies
+        a High Capacity TopN Report. These objects will be created by
+        the agent for all nlMatrixTopNEntries associated with whichever
+        nlMatrixTopNControlEntries have a nlMatrixTopNControlRateBase
+        that specify a high capacity report."
+    INDEX { nlMatrixTopNControlIndex, nlMatrixTopNIndex }
+    ::= { nlMatrixTopNHighCapacityTable 1 }
+
+NlMatrixTopNHighCapacityEntry ::= SEQUENCE {
+  nlMatrixTopNHighCapacityProtocolDirLocalIndex    Integer32,
+  nlMatrixTopNHighCapacitySourceAddress            OCTET STRING,
+  nlMatrixTopNHighCapacityDestAddress              OCTET STRING,
+  nlMatrixTopNHighCapacityBasePktRate              Gauge32,
+  nlMatrixTopNHighCapacityOverflowPktRate          Gauge32,
+  nlMatrixTopNHighCapacityPktRate                  CounterBasedGauge64,
+  nlMatrixTopNHighCapacityReverseBasePktRate       Gauge32,
+  nlMatrixTopNHighCapacityReverseOverflowPktRate   Gauge32,
+  nlMatrixTopNHighCapacityReversePktRate           CounterBasedGauge64,
+  nlMatrixTopNHighCapacityBaseOctetRate            Gauge32,
+  nlMatrixTopNHighCapacityOverflowOctetRate        Gauge32,
+  nlMatrixTopNHighCapacityOctetRate                CounterBasedGauge64,
+  nlMatrixTopNHighCapacityReverseBaseOctetRate     Gauge32,
+  nlMatrixTopNHighCapacityReverseOverflowOctetRate Gauge32,
+  nlMatrixTopNHighCapacityReverseOctetRate         CounterBasedGauge64
+}
+
+nlMatrixTopNHighCapacityProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The protocolDirLocalIndex of the network layer protocol of
+
+        this entry's network address."
+    ::= { nlMatrixTopNHighCapacityEntry 1 }
+
+nlMatrixTopNHighCapacitySourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network layer address of the source host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated nlMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of ip, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the ip address,
+        in network byte order."
+    ::= { nlMatrixTopNHighCapacityEntry 2 }
+
+nlMatrixTopNHighCapacityDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network layer address of the destination host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated nlMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the nlMatrixTopNProtocolDirLocalIndex
+        indicates an encapsulation of ip, this object is encoded as a
+        length octet of 4, followed by the 4 octets of the ip address,
+        in network byte order."
+    ::= { nlMatrixTopNHighCapacityEntry 3 }
+
+nlMatrixTopNHighCapacityBasePktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the source host
+        to the destination host during this sampling interval,
+        modulo 2^32, counted using the rules for counting the
+
+        nlMatrixSDPkts object."
+    ::= { nlMatrixTopNHighCapacityEntry 4 }
+
+nlMatrixTopNHighCapacityOverflowPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the source host
+        to the destination host during this sampling interval,
+        divided by 2^32, truncating fractions (i.e., X DIV 2^32),
+        and counted using the rules for counting the
+        nlMatrixSDPkts object."
+    ::= { nlMatrixTopNHighCapacityEntry 5 }
+
+nlMatrixTopNHighCapacityPktRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the source host to the
+        destination host during this sampling interval, counted
+        using the rules for counting the nlMatrixSDPkts object.
+        If the value of nlMatrixTopNControlRateBase is
+        nlMatrixTopNHighCapacityPkts, this variable will be
+        used to sort this report."
+    ::= { nlMatrixTopNHighCapacityEntry 6 }
+
+nlMatrixTopNHighCapacityReverseBasePktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the destination host to the
+        source host during this sampling interval, modulo 2^32, counted
+        using the rules for counting the nlMatrixSDPkts object (note
+        that the corresponding nlMatrixSDPkts object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNHighCapacityPkts, the sort of topN entries is
+        based entirely on nlMatrixTopNHighCapacityPktRate, and not on
+        the value of this object."
+    ::= { nlMatrixTopNHighCapacityEntry 7 }
+
+nlMatrixTopNHighCapacityReverseOverflowPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the destination host to the
+        source host during this sampling interval, divided by 2^32,
+        truncating fractions (i.e., X DIV 2^32), and counted
+        using the rules for counting the nlMatrixSDPkts object (note
+        that the corresponding nlMatrixSDPkts object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNHighCapacityPkts, the sort of topN entries is
+        based entirely on nlMatrixTopNHighCapacityPktRate, and not on
+        the value of this object."
+    ::= { nlMatrixTopNHighCapacityEntry 8 }
+
+nlMatrixTopNHighCapacityReversePktRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the destination host to the
+        source host during this sampling interval, counted
+        using the rules for counting the nlMatrixSDPkts object (note
+        that the corresponding nlMatrixSDPkts object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNHighCapacityPkts, the sort of topN entries is
+        based entirely on nlMatrixTopNHighCapacityPktRate, and not on
+        the value of this object."
+    ::= { nlMatrixTopNHighCapacityEntry 9 }
+
+nlMatrixTopNHighCapacityBaseOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the source host to the
+        destination host during this sampling interval, modulo 2^32,
+        counted using the rules for counting the nlMatrixSDOctets
+        object."
+    ::= { nlMatrixTopNHighCapacityEntry 10 }
+
+nlMatrixTopNHighCapacityOverflowOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the source host
+        to the destination host during this sampling interval,
+        divided by 2^32, truncating fractions (i.e., X DIV 2^32),
+        and counted using the rules for counting the
+        nlMatrixSDOctets object."
+    ::= { nlMatrixTopNHighCapacityEntry 11 }
+
+nlMatrixTopNHighCapacityOctetRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the source host
+        to the destination host during this sampling interval,
+        counted using the rules for counting the
+        nlMatrixSDOctets object.
+        If the value of nlMatrixTopNControlRateBase is
+        nlMatrixTopNHighCapacityOctets, this variable will be used
+        to sort this report."
+    ::= { nlMatrixTopNHighCapacityEntry 12 }
+
+nlMatrixTopNHighCapacityReverseBaseOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the destination host to the
+        source host during this sampling interval, modulo 2^32, counted
+        using the rules for counting the nlMatrixSDOctets object (note
+        that the corresponding nlMatrixSDOctets object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNHighCapacityOctets, the sort of topN entries is
+        based entirely on nlMatrixTopNHighCapacityOctetRate, and not on
+        the value of this object."
+    ::= { nlMatrixTopNHighCapacityEntry 13 }
+
+nlMatrixTopNHighCapacityReverseOverflowOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the destination host to the
+        source host during this sampling interval, divided by 2^32,
+        truncating fractions (i.e., X DIV 2^32), and counted
+        using the rules for counting the nlMatrixSDOctets object (note
+        that the corresponding nlMatrixSDOctets object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNHighCapacityOctets, the sort of topN entries is
+        based entirely on nlMatrixTopNHighCapacityOctetRate, and not on
+        the value of this object."
+    ::= { nlMatrixTopNHighCapacityEntry 14 }
+
+nlMatrixTopNHighCapacityReverseOctetRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the destination host to the
+        source host during this sampling interval, counted
+        using the rules for counting the nlMatrixSDOctets object (note
+        that the corresponding nlMatrixSDOctets object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNHighCapacityOctets, the sort of topN entries is
+        based entirely on nlMatrixTopNHighCapacityOctetRate, and not on
+        the value of this object."
+    ::= { nlMatrixTopNHighCapacityEntry 15 }
+
+-- High Capacity extensions for the alHostTable
+
+alHostHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF AlHostHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alHostTable."
+    ::= { alHost 2 }
+
+alHostHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     AlHostHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alHostEntry. These objects will be created by the agent
+        for all alHostEntries associated with whichever
+        hlHostControlEntries it deems appropriate. (i.e., either all
+        alHostHighCapacityEntries associated with a particular
+        hlHostControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hlHostControlIndex, alHostTimeMark,
+            protocolDirLocalIndex, nlHostAddress,
+            protocolDirLocalIndex }
+    ::= { alHostHighCapacityTable 1 }
+
+AlHostHighCapacityEntry ::= SEQUENCE {
+    alHostHighCapacityInOverflowPkts    ZeroBasedCounter32,
+    alHostHighCapacityInPkts            ZeroBasedCounter64,
+    alHostHighCapacityOutOverflowPkts   ZeroBasedCounter32,
+    alHostHighCapacityOutPkts           ZeroBasedCounter64,
+    alHostHighCapacityInOverflowOctets  ZeroBasedCounter32,
+    alHostHighCapacityInOctets          ZeroBasedCounter64,
+    alHostHighCapacityOutOverflowOctets ZeroBasedCounter32,
+    alHostHighCapacityOutOctets         ZeroBasedCounter64
+}
+
+alHostHighCapacityInOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alHostInPkts
+        counter has overflowed."
+    ::= { alHostHighCapacityEntry 1 }
+
+alHostHighCapacityInPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets of this protocol type without errors
+        transmitted to this address since it was added to the
+        alHostHighCapacityTable.  Note that this is the number of
+        link-layer packets, so if a single network-layer packet
+        is fragmented into several link-layer frames, this counter
+        is incremented several times."
+    ::= { alHostHighCapacityEntry 2 }
+
+alHostHighCapacityOutOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alHostOutPkts
+        counter has overflowed."
+    ::= { alHostHighCapacityEntry 3 }
+
+alHostHighCapacityOutPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets of this protocol type without errors
+        transmitted by this address since it was added to the
+        alHostHighCapacityTable.  Note that this is the number of
+        link-layer packets, so if a single network-layer packet
+        is fragmented into several link-layer frames, this counter
+        is incremented several times."
+    ::= { alHostHighCapacityEntry 4 }
+
+alHostHighCapacityInOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alHostInOctets
+        counter has overflowed."
+    ::= { alHostHighCapacityEntry 5 }
+
+alHostHighCapacityInOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted to this address
+        of this protocol type since it was added to the
+        alHostHighCapacityTable (excluding framing bits but
+        including FCS octets), excluding those octets in
+        packets that contained errors.
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { alHostHighCapacityEntry 6 }
+
+alHostHighCapacityOutOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alHostOutOctets
+        counter has overflowed."
+    ::= { alHostHighCapacityEntry 7 }
+
+alHostHighCapacityOutOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted by this address
+        of this protocol type since it was added to the
+        alHostHighCapacityTable (excluding framing bits but
+        including FCS octets), excluding those octets in
+        packets that contained errors.
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { alHostHighCapacityEntry 8 }
+
+-- High Capacity extensions for the alMatrixSDTable
+
+alMatrixSDHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF AlMatrixSDHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alMatrixSDTable."
+    ::= { alMatrix 5 }
+
+alMatrixSDHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     AlMatrixSDHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alMatrixSDEntry. These objects will be created by the agent
+        for all alMatrixSDEntries associated with whichever
+        hlMatrixControlEntries it deems appropriate. (i.e., either all
+        alMatrixSDHighCapacityEntries associated with a particular
+        hlMatrixControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hlMatrixControlIndex, alMatrixSDTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixSDSourceAddress, nlMatrixSDDestAddress,
+            protocolDirLocalIndex }
+    ::= { alMatrixSDHighCapacityTable 1 }
+
+AlMatrixSDHighCapacityEntry ::= SEQUENCE {
+    alMatrixSDHighCapacityOverflowPkts   ZeroBasedCounter32,
+    alMatrixSDHighCapacityPkts           ZeroBasedCounter64,
+    alMatrixSDHighCapacityOverflowOctets ZeroBasedCounter32,
+    alMatrixSDHighCapacityOctets         ZeroBasedCounter64
+}
+
+alMatrixSDHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alMatrixSDPkts
+        counter has overflowed."
+    ::= { alMatrixSDHighCapacityEntry 1 }
+
+alMatrixSDHighCapacityPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets of this protocol type
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixSDHighCapacityTable.
+        Note that this is the number of link-layer packets, so if a
+        single network-layer packet is fragmented into several
+        link-layer frames, this counter is incremented several times."
+    ::= { alMatrixSDHighCapacityEntry 2 }
+
+alMatrixSDHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alMatrixSDOctets
+        counter has overflowed."
+    ::= { alMatrixSDHighCapacityEntry 3 }
+
+alMatrixSDHighCapacityOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets in good packets of this protocol type
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixSDHighCapacityTable
+        (excluding framing bits but including FCS octets).
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { alMatrixSDHighCapacityEntry 4 }
+
+-- High Capacity extensions for the alMatrixDSTable
+
+alMatrixDSHighCapacityTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF AlMatrixDSHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alMatrixDSTable."
+    ::= { alMatrix 6 }
+
+alMatrixDSHighCapacityEntry  OBJECT-TYPE
+    SYNTAX     AlMatrixDSHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alMatrixSDTable. These objects will be created by the agent
+        for all alMatrixDSEntries associated with whichever
+        hlMatrixControlEntries it deems appropriate. (i.e., either all
+        alMatrixDSHighCapacityEntries associated with a particular
+        hlMatrixControlEntry will be created, or none of them will
+        be.)"
+    INDEX { hlMatrixControlIndex, alMatrixDSTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixDSDestAddress, nlMatrixDSSourceAddress,
+            protocolDirLocalIndex }
+    ::= { alMatrixDSHighCapacityTable 1 }
+
+AlMatrixDSHighCapacityEntry ::= SEQUENCE {
+    alMatrixDSHighCapacityOverflowPkts   ZeroBasedCounter32,
+    alMatrixDSHighCapacityPkts           ZeroBasedCounter64,
+    alMatrixDSHighCapacityOverflowOctets ZeroBasedCounter32,
+    alMatrixDSHighCapacityOctets         ZeroBasedCounter64
+}
+
+alMatrixDSHighCapacityOverflowPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alMatrixDSPkts
+        counter has overflowed."
+    ::= { alMatrixDSHighCapacityEntry 1 }
+
+alMatrixDSHighCapacityPkts OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets of this protocol type
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixDSHighCapacityTable.
+        Note that this is the number of link-layer packets, so if a
+        single network-layer packet is fragmented into several
+        link-layer frames, this counter is incremented several times."
+    ::= { alMatrixDSHighCapacityEntry 2 }
+
+alMatrixDSHighCapacityOverflowOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times the associated alMatrixDSOctets
+        counter has overflowed."
+    ::= { alMatrixDSHighCapacityEntry 3 }
+
+alMatrixDSHighCapacityOctets OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets in good packets of this protocol type
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixDSHighCapacityTable
+        (excluding framing bits but including FCS octets).
+
+        Note this doesn't count just those octets in the particular
+        protocol frames, but includes the entire packet that contained
+        the protocol."
+    ::= { alMatrixDSHighCapacityEntry 4 }
+
+alMatrixTopNHighCapacityTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF AlMatrixTopNHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alMatrixTopNTable when alMatrixTopNControlRateBase specifies
+        a High Capacity TopN Report."
+    ::= { alMatrix 7 }
+
+alMatrixTopNHighCapacityEntry OBJECT-TYPE
+    SYNTAX     AlMatrixTopNHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        alMatrixTopNEntry when alMatrixTopNControlRateBase specifies
+        a High Capacity TopN Report. These objects will be created by
+        the agent for all alMatrixTopNEntries associated with whichever
+        alMatrixTopNControlEntries have a alMatrixTopNControlRateBase
+        that specify a high capacity report."
+     INDEX { alMatrixTopNControlIndex, alMatrixTopNIndex }
+    ::= { alMatrixTopNHighCapacityTable 1 }
+
+AlMatrixTopNHighCapacityEntry ::= SEQUENCE {
+  alMatrixTopNHighCapacityProtocolDirLocalIndex    Integer32,
+  alMatrixTopNHighCapacitySourceAddress            OCTET STRING,
+  alMatrixTopNHighCapacityDestAddress              OCTET STRING,
+  alMatrixTopNHighCapacityAppProtocolDirLocalIndex Integer32,
+  alMatrixTopNHighCapacityBasePktRate              Gauge32,
+  alMatrixTopNHighCapacityOverflowPktRate          Gauge32,
+  alMatrixTopNHighCapacityPktRate                  CounterBasedGauge64,
+  alMatrixTopNHighCapacityReverseBasePktRate       Gauge32,
+  alMatrixTopNHighCapacityReverseOverflowPktRate   Gauge32,
+  alMatrixTopNHighCapacityReversePktRate           CounterBasedGauge64,
+  alMatrixTopNHighCapacityBaseOctetRate            Gauge32,
+  alMatrixTopNHighCapacityOverflowOctetRate        Gauge32,
+  alMatrixTopNHighCapacityOctetRate                CounterBasedGauge64,
+  alMatrixTopNHighCapacityReverseBaseOctetRate     Gauge32,
+  alMatrixTopNHighCapacityReverseOverflowOctetRate Gauge32,
+  alMatrixTopNHighCapacityReverseOctetRate         CounterBasedGauge64
+}
+
+alMatrixTopNHighCapacityProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The protocolDirLocalIndex of the network layer protocol of
+        this entry's network address."
+    ::= { alMatrixTopNHighCapacityEntry 1 }
+
+alMatrixTopNHighCapacitySourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network layer address of the source host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated alMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the alMatrixTopNProtocolDirLocalIndex
+        indicates an encapsulation of ip, this object is encoded as a
+        length octet of 4, followed by the 4 octets of the ip address,
+        in network byte order."
+    ::= { alMatrixTopNHighCapacityEntry 2 }
+
+alMatrixTopNHighCapacityDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network layer address of the destination host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated alMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the alMatrixTopNProtocolDirLocalIndex
+        indicates an encapsulation of ip, this object is encoded as a
+        length octet of 4, followed by the 4 octets of the ip address,
+        in network byte order."
+    ::= { alMatrixTopNHighCapacityEntry 3 }
+
+alMatrixTopNHighCapacityAppProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of the protocol counted by this entry."
+    ::= { alMatrixTopNHighCapacityEntry 4 }
+
+alMatrixTopNHighCapacityBasePktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the
+        source host to the destination host during this sampling
+        interval, modulo 2^32, counted using the rules for counting
+        the alMatrixSDPkts object."
+    ::= { alMatrixTopNHighCapacityEntry 5 }
+
+alMatrixTopNHighCapacityOverflowPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the source
+        host to the destination host during this sampling interval,
+        divided by 2^32, truncating fractions (i.e., X DIV 2^32),
+        and counted using the rules for counting the
+        alMatrixSDPkts object."
+    ::= { alMatrixTopNHighCapacityEntry 6 }
+
+alMatrixTopNHighCapacityPktRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the source
+        host to the destination host during this sampling interval,
+        counted using the rules for counting the
+        alMatrixSDPkts object.
+        If the value of alMatrixTopNControlRateBase is
+        alMatrixTopNTerminalsPkts, alMatrixTopNAllPkts,
+        alMatrixTopNTerminalsHighCapacityPkts, or
+        alMatrixTopNAllHighCapacityPkts, this variable will be used
+        to sort this report."
+    ::= { alMatrixTopNHighCapacityEntry 7 }
+
+alMatrixTopNHighCapacityReverseBasePktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, modulo 2^32, counted using the rules for counting
+        the alMatrixSDPkts object (note that the corresponding
+        alMatrixSDPkts object selected is the one whose source address
+        is equal to alMatrixTopNDestAddress and whose destination
+        address is equal to alMatrixTopNSourceAddress.)"
+    ::= { alMatrixTopNHighCapacityEntry 8 }
+
+alMatrixTopNHighCapacityReverseOverflowPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, divided by 2^32, truncating fractions
+        (i.e., X DIV 2^32), and counted using the rules for
+        counting the alMatrixSDPkts object (note that the
+        corresponding alMatrixSDPkts object selected is the
+        one whose source address is equal to alMatrixTopNDestAddress
+        and whose destination address is equal to
+        alMatrixTopNSourceAddress.)"
+    ::= { alMatrixTopNHighCapacityEntry 9 }
+
+alMatrixTopNHighCapacityReversePktRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, counted using the rules for counting the
+        alMatrixSDPkts object (note that the corresponding
+        alMatrixSDPkts object selected is the one whose source address
+        is equal to alMatrixTopNDestAddress and whose destination
+        address is equal to alMatrixTopNSourceAddress.)"
+    ::= { alMatrixTopNHighCapacityEntry 10 }
+
+alMatrixTopNHighCapacityBaseOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the source host
+        to the destination host during this sampling interval,
+        modulo 2^32, counted using the rules for counting the
+        alMatrixSDOctets object."
+    ::= { alMatrixTopNHighCapacityEntry 11 }
+
+alMatrixTopNHighCapacityOverflowOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the source host
+        to the destination host during this sampling interval,
+        divided by 2^32, truncating fractions (i.e., X DIV 2^32),
+        and counted using the rules for counting the
+        alMatrixSDOctets object."
+    ::= { alMatrixTopNHighCapacityEntry 12 }
+
+alMatrixTopNHighCapacityOctetRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the source host
+        to the destination host during this sampling interval,
+        counted using the rules for counting the
+        alMatrixSDOctets object.
+        If the value of alMatrixTopNControlRateBase is
+        alMatrixTopNTerminalsOctets, alMatrixTopNAllOctets,
+        alMatrixTopNTerminalsHighCapacityOctets, or
+        alMatrixTopNAllHighCapacityOctets, this variable will be used
+        to sort this report."
+    ::= { alMatrixTopNHighCapacityEntry 13 }
+
+alMatrixTopNHighCapacityReverseBaseOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, modulo 2^32, counted using the rules for counting
+        the alMatrixSDOctets object (note that the corresponding
+        alMatrixSDOctets object selected is the one whose source
+        address is equal to alMatrixTopNDestAddress and whose
+        destination address is equal to alMatrixTopNSourceAddress.)"
+    ::= { alMatrixTopNHighCapacityEntry 14 }
+
+alMatrixTopNHighCapacityReverseOverflowOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, divided by 2^32, truncating fractions (i.e., X DIV
+        2^32), and counted using the rules for counting the
+        alMatrixSDOctets object (note that the corresponding
+        alMatrixSDOctets object selected is the one whose source
+        address is equal to alMatrixTopNDestAddress and whose
+        destination address is equal to alMatrixTopNSourceAddress.)"
+    ::= { alMatrixTopNHighCapacityEntry 15 }
+
+alMatrixTopNHighCapacityReverseOctetRate OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the
+        destination host to the source host during this sampling
+
+        interval, counted using the rules for counting the
+        alMatrixSDOctets object (note that the corresponding
+        alMatrixSDOctets object selected is the one whose source
+        address is equal to alMatrixTopNDestAddress and whose
+        destination address is equal to alMatrixTopNSourceAddress.)"
+    ::= { alMatrixTopNHighCapacityEntry 16 }
+
+usrHistoryHighCapacityTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UsrHistoryHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        usrHistoryTable."
+        ::= { usrHistory 4 }
+
+usrHistoryHighCapacityEntry OBJECT-TYPE
+    SYNTAX UsrHistoryHighCapacityEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Contains the High Capacity RMON extensions to the RMON-2
+        usrHistoryEntry. These objects will be created by the agent
+        for all usrHistoryEntries associated with whichever
+        usrHistoryControlEntries it deems appropriate. (i.e., either all
+        usrHistoryHighCapacityEntries associated with a particular
+        usrHistoryControlEntry will be created, or none of them will
+        be.)"
+    INDEX { usrHistoryControlIndex, usrHistorySampleIndex,
+            usrHistoryObjectIndex }
+    ::= { usrHistoryHighCapacityTable 1 }
+
+UsrHistoryHighCapacityEntry ::= SEQUENCE {
+    usrHistoryHighCapacityOverflowAbsValue     Gauge32,
+    usrHistoryHighCapacityAbsValue             CounterBasedGauge64
+}
+
+usrHistoryHighCapacityOverflowAbsValue OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The absolute value (i.e. unsigned value) of the
+        user-specified statistic during the last sampling period,
+        divided by 2^32, truncating fractions (i.e., X DIV 2^32).
+        The value during the current sampling period is not made
+        available until the period is completed.
+
+        To obtain the true value for this sampling interval, the
+        associated instance of usrHistoryValStatus should be checked,
+        and usrHistoryAbsValue adjusted as necessary.
+
+        If the MIB instance could not be accessed during the sampling
+        interval, then this object will have a value of zero and the
+        associated instance of usrHistoryValStatus will be set to
+        'valueNotAvailable(1)'."
+    ::= { usrHistoryHighCapacityEntry 1 }
+
+usrHistoryHighCapacityAbsValue OBJECT-TYPE
+    SYNTAX CounterBasedGauge64
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The absolute value (i.e. unsigned value) of the
+        user-specified statistic during the last sampling period. The
+        value during the current sampling period is not made available
+        until the period is completed.
+
+        To obtain the true value for this sampling interval, the
+        associated instance of usrHistoryValStatus should be checked,
+        and usrHistoryHighCapacityAbsValue adjusted as necessary.
+
+        If the MIB instance could not be accessed during the sampling
+        interval, then this object will have a value of zero and the
+        associated instance of usrHistoryValStatus will be set to
+        'valueNotAvailable(1)'."
+    ::= { usrHistoryHighCapacityEntry 2 }
+
+--
+-- High Capacity RMON Probe Capabilities
+--
+hcRMONCapabilities OBJECT-TYPE
+    SYNTAX BITS {
+        mediaIndependentGroup(0),
+        etherStatsHighCapacityGroup(1),
+        etherHistoryHighCapacityGroup(2),
+        hostHighCapacityGroup(3),
+        hostTopNHighCapacityGroup(4),
+        matrixHighCapacityGroup(5),
+        captureBufferHighCapacityGroup(6),
+        protocolDistributionHighCapacityGroup(7),
+        nlHostHighCapacityGroup(8),
+        nlMatrixHighCapacityGroup(9),
+        nlMatrixTopNHighCapacityGroup(10),
+        alHostHighCapacityGroup(11),
+        alMatrixHighCapacityGroup(12),
+        alMatrixTopNHighCapacityGroup(13),
+        usrHistoryHighCapacityGroup(14)
+    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An indication of the High Capacity RMON MIB groups supported
+        on at least one interface by this probe."
+    ::= { probeConfig 16 }
+
+-- Conformance Macros
+
+hcRmonMIBCompliances OBJECT IDENTIFIER ::= { rmonConformance 6 }
+hcRmonMIBGroups      OBJECT IDENTIFIER ::= { rmonConformance 7 }
+
+hcMediaIndependentCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to the
+        High Capacity Media Independent Group."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mediaIndependentGroup, hcRMONInformationGroup }
+    ::= { hcRmonMIBCompliances 1 }
+
+hcRmon1MIBCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "Describes the requirements for conformance to the High
+        Capacity RMON-1 MIB"
+    MODULE  -- this module
+        GROUP etherStatsHighCapacityGroup
+        DESCRIPTION
+            "The etherStatsHighCapacityGroup is optional but requires
+            implementation of the rmonEtherStatsGroup."
+
+        GROUP etherHistoryHighCapacityGroup
+        DESCRIPTION
+            "The etherHistoryHighCapacityGroup is optional but
+            requires implementation of the rmonHistoryControlGroup and
+            rmonEthernetHistoryGroup."
+
+        GROUP hostHighCapacityGroup
+        DESCRIPTION
+            "The hostHighCapacityGroup is mandatory when the
+            hostTopNHighCapacityGroup is implemented. This group also
+            requires implementation of the rmonHostGroup."
+
+        GROUP hostTopNHighCapacityGroup
+        DESCRIPTION
+            "The hostTopNHighCapacityGroup is optional but requires
+            implementation of the rmonHostTopNGroup."
+
+        GROUP matrixHighCapacityGroup
+        DESCRIPTION
+            "The matrixHighCapacityGroup is optional but requires
+            implementation of the rmonMatrixGroup."
+
+        GROUP captureBufferHighCapacityGroup
+        DESCRIPTION
+            "The captureBufferHighCapacityGroup is optional but
+            requires implementation of the rmonFilterGroup and
+            rmonPacketCaptureGroup."
+
+    MODULE RMON-MIB
+        GROUP rmonEtherStatsGroup
+        DESCRIPTION
+            "The RMON Ethernet Statistics Group is mandatory if the
+            etherStatsHighCapacityGroup is implemented."
+
+        GROUP rmonHistoryControlGroup
+        DESCRIPTION
+            "The RMON History Control Group is mandatory if the
+            etherHistoryHighCapacityGroup is implemented."
+
+        GROUP rmonEthernetHistoryGroup
+        DESCRIPTION
+            "The RMON Ethernet History Group is mandatory if the
+            etherHistoryHighCapacityGroup is implemented."
+
+        GROUP rmonHostGroup
+        DESCRIPTION
+            "The RMON Host Group is mandatory if the
+            hostHighCapacityGroup is implemented."
+
+        GROUP rmonHostTopNGroup
+        DESCRIPTION
+            "The RMON Host Top N Group is mandatory if the
+            hostTopNHighCapacityGroup is implemented."
+
+        GROUP rmonMatrixGroup
+        DESCRIPTION
+            "The RMON Matrix Group is mandatory if the
+            matrixHighCapacityGroup is implemented."
+
+        GROUP rmonFilterGroup
+        DESCRIPTION
+            "The RMON Filter Group is mandatory when the
+            captureBufferHighCapacityGroup is implemented."
+
+       GROUP rmonPacketCaptureGroup
+       DESCRIPTION
+            "The RMON Packet Capture Group is mandatory when the
+           captureBufferHighCapacityGroup is implemented."
+    ::= { hcRmonMIBCompliances 2 }
+
+hcRmon2MIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the High Capacity RMON-2 MIB"
+    MODULE  -- this module
+        MANDATORY-GROUPS { protocolDistributionHighCapacityGroup,
+                           nlHostHighCapacityGroup,
+                           nlMatrixHighCapacityGroup,
+                           nlMatrixTopNHighCapacityGroup,
+                           usrHistoryHighCapacityGroup,
+                           hcRMONInformationGroup }
+    MODULE RMON2-MIB
+        MANDATORY-GROUPS { protocolDirectoryGroup,
+                           protocolDistributionGroup,
+                           addressMapGroup,
+                           nlHostGroup,
+                           nlMatrixGroup,
+                           usrHistoryGroup,
+                           probeInformationGroup }
+
+        GROUP   rmon1EnhancementGroup
+        DESCRIPTION
+            "The rmon1EnhancementGroup is mandatory for systems which
+            implement RMON [RFC2819]"
+    ::= { hcRmonMIBCompliances 3 }
+
+hcRmon2MIBApplicationLayerCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the High Capacity RMON-2 MIB with Application Layer
+        Enhancements."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { protocolDistributionHighCapacityGroup,
+                           nlHostHighCapacityGroup,
+                           nlMatrixHighCapacityGroup,
+                           nlMatrixTopNHighCapacityGroup,
+                           alHostHighCapacityGroup,
+                           alMatrixHighCapacityGroup,
+                           alMatrixTopNHighCapacityGroup,
+                           usrHistoryHighCapacityGroup,
+                           hcRMONInformationGroup }
+    MODULE RMON2-MIB
+        MANDATORY-GROUPS { protocolDirectoryGroup,
+                           protocolDistributionGroup,
+                           addressMapGroup,
+                           nlHostGroup,
+                           nlMatrixGroup,
+                           alHostGroup,
+                           alMatrixGroup,
+                           usrHistoryGroup,
+                           probeInformationGroup }
+
+        GROUP   rmon1EnhancementGroup
+        DESCRIPTION
+            "The rmon1EnhancementGroup is mandatory for systems which
+            implement RMON [RFC2819]"
+    ::= { hcRmonMIBCompliances 4 }
+
+mediaIndependentGroup OBJECT-GROUP
+    OBJECTS {mediaIndependentDataSource,
+        mediaIndependentDropEvents,
+        mediaIndependentDroppedFrames,
+        mediaIndependentInPkts,
+        mediaIndependentInOverflowPkts,
+        mediaIndependentInHighCapacityPkts,
+        mediaIndependentOutPkts,
+        mediaIndependentOutOverflowPkts,
+        mediaIndependentOutHighCapacityPkts,
+        mediaIndependentInOctets,
+        mediaIndependentInOverflowOctets,
+        mediaIndependentInHighCapacityOctets,
+        mediaIndependentOutOctets,
+        mediaIndependentOutOverflowOctets,
+        mediaIndependentOutHighCapacityOctets,
+        mediaIndependentInNUCastPkts,
+        mediaIndependentInNUCastOverflowPkts,
+        mediaIndependentInNUCastHighCapacityPkts,
+        mediaIndependentOutNUCastPkts,
+        mediaIndependentOutNUCastOverflowPkts,
+        mediaIndependentOutNUCastHighCapacityPkts,
+        mediaIndependentInErrors,
+        mediaIndependentOutErrors,
+        mediaIndependentInputSpeed,
+        mediaIndependentOutputSpeed,
+        mediaIndependentDuplexMode,
+        mediaIndependentDuplexChanges,
+        mediaIndependentDuplexLastChange,
+        mediaIndependentOwner,
+        mediaIndependentStatus }
+    STATUS current
+    DESCRIPTION
+        "Collects utilization statistics for any type of network."
+    ::= { hcRmonMIBGroups 1 }
+
+etherStatsHighCapacityGroup OBJECT-GROUP
+    OBJECTS { etherStatsHighCapacityOverflowPkts,
+              etherStatsHighCapacityPkts,
+              etherStatsHighCapacityOverflowOctets,
+              etherStatsHighCapacityOctets,
+              etherStatsHighCapacityOverflowPkts64Octets,
+              etherStatsHighCapacityPkts64Octets,
+              etherStatsHighCapacityOverflowPkts65to127Octets,
+              etherStatsHighCapacityPkts65to127Octets,
+              etherStatsHighCapacityOverflowPkts128to255Octets,
+              etherStatsHighCapacityPkts128to255Octets,
+              etherStatsHighCapacityOverflowPkts256to511Octets,
+              etherStatsHighCapacityPkts256to511Octets,
+              etherStatsHighCapacityOverflowPkts512to1023Octets,
+              etherStatsHighCapacityPkts512to1023Octets,
+              etherStatsHighCapacityOverflowPkts1024to1518Octets,
+              etherStatsHighCapacityPkts1024to1518Octets }
+    STATUS  current
+    DESCRIPTION
+        "Collects utilization statistics for ethernet networks."
+    ::= { hcRmonMIBGroups 2 }
+
+etherHistoryHighCapacityGroup OBJECT-GROUP
+    OBJECTS { etherHistoryHighCapacityOverflowPkts,
+              etherHistoryHighCapacityPkts,
+              etherHistoryHighCapacityOverflowOctets,
+              etherHistoryHighCapacityOctets }
+    STATUS  current
+    DESCRIPTION
+        "Collects utilization statistics for ethernet networks."
+    ::= { hcRmonMIBGroups 3 }
+
+hostHighCapacityGroup OBJECT-GROUP
+    OBJECTS { hostHighCapacityInOverflowPkts,
+              hostHighCapacityInPkts,
+              hostHighCapacityOutOverflowPkts,
+              hostHighCapacityOutPkts,
+              hostHighCapacityInOverflowOctets,
+              hostHighCapacityInOctets,
+              hostHighCapacityOutOverflowOctets,
+              hostHighCapacityOutOctets,
+              hostTimeHighCapacityInOverflowPkts,
+              hostTimeHighCapacityInPkts,
+              hostTimeHighCapacityOutOverflowPkts,
+              hostTimeHighCapacityOutPkts,
+              hostTimeHighCapacityInOverflowOctets,
+              hostTimeHighCapacityInOctets,
+              hostTimeHighCapacityOutOverflowOctets,
+              hostTimeHighCapacityOutOctets }
+    STATUS  current
+    DESCRIPTION
+        "Collects utilization and error statistics per host."
+    ::= { hcRmonMIBGroups 4 }
+
+hostTopNHighCapacityGroup OBJECT-GROUP
+    OBJECTS { hostTopNHighCapacityAddress,
+        hostTopNHighCapacityBaseRate,
+        hostTopNHighCapacityOverflowRate,
+        hostTopNHighCapacityRate }
+    STATUS  current
+    DESCRIPTION
+        "Prepares sorted reports of utilization and error statistics
+        per host."
+    ::= { hcRmonMIBGroups 5 }
+
+matrixHighCapacityGroup OBJECT-GROUP
+    OBJECTS { matrixSDHighCapacityOverflowPkts,
+              matrixSDHighCapacityPkts,
+              matrixSDHighCapacityOverflowOctets,
+              matrixSDHighCapacityOctets,
+              matrixDSHighCapacityOverflowPkts,
+              matrixDSHighCapacityPkts,
+              matrixDSHighCapacityOverflowOctets,
+              matrixDSHighCapacityOctets }
+    STATUS  current
+    DESCRIPTION
+        "Collects utilization statistics per conversation."
+    ::= { hcRmonMIBGroups 6 }
+
+captureBufferHighCapacityGroup OBJECT-GROUP
+    OBJECTS { captureBufferPacketHighCapacityTime }
+    STATUS  current
+    DESCRIPTION
+        "Provides finer granularity time stamps."
+    ::= { hcRmonMIBGroups 7 }
+
+protocolDistributionHighCapacityGroup OBJECT-GROUP
+    OBJECTS { protocolDistStatsHighCapacityOverflowPkts,
+              protocolDistStatsHighCapacityPkts,
+              protocolDistStatsHighCapacityOverflowOctets,
+              protocolDistStatsHighCapacityOctets }
+    STATUS  current
+    DESCRIPTION
+        "Collects the relative amounts of octets and packets for the
+        different protocols detected on a network segment."
+    ::= { hcRmonMIBGroups 8 }
+
+nlHostHighCapacityGroup OBJECT-GROUP
+    OBJECTS { nlHostHighCapacityInOverflowPkts,
+              nlHostHighCapacityInPkts,
+              nlHostHighCapacityOutOverflowPkts,
+              nlHostHighCapacityOutPkts,
+              nlHostHighCapacityInOverflowOctets,
+              nlHostHighCapacityInOctets,
+              nlHostHighCapacityOutOverflowOctets,
+              nlHostHighCapacityOutOctets }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic sent from and to each network
+        address discovered by the probe."
+    ::= { hcRmonMIBGroups 9 }
+
+nlMatrixHighCapacityGroup OBJECT-GROUP
+    OBJECTS { nlMatrixSDHighCapacityOverflowPkts,
+              nlMatrixSDHighCapacityPkts,
+              nlMatrixSDHighCapacityOverflowOctets,
+              nlMatrixSDHighCapacityOctets,
+              nlMatrixDSHighCapacityOverflowPkts,
+              nlMatrixDSHighCapacityPkts,
+              nlMatrixDSHighCapacityOverflowOctets,
+              nlMatrixDSHighCapacityOctets }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic sent between each pair of
+        network addresses discovered by the probe."
+    ::= { hcRmonMIBGroups 10 }
+
+nlMatrixTopNHighCapacityGroup OBJECT-GROUP
+    OBJECTS { nlMatrixTopNHighCapacityProtocolDirLocalIndex,
+        nlMatrixTopNHighCapacitySourceAddress,
+        nlMatrixTopNHighCapacityDestAddress,
+        nlMatrixTopNHighCapacityBasePktRate,
+        nlMatrixTopNHighCapacityOverflowPktRate,
+        nlMatrixTopNHighCapacityPktRate,
+        nlMatrixTopNHighCapacityReverseBasePktRate,
+        nlMatrixTopNHighCapacityReverseOverflowPktRate,
+        nlMatrixTopNHighCapacityReversePktRate,
+        nlMatrixTopNHighCapacityBaseOctetRate,
+        nlMatrixTopNHighCapacityOverflowOctetRate,
+        nlMatrixTopNHighCapacityOctetRate,
+        nlMatrixTopNHighCapacityReverseBaseOctetRate,
+        nlMatrixTopNHighCapacityReverseOverflowOctetRate,
+        nlMatrixTopNHighCapacityReverseOctetRate }
+    STATUS  current
+    DESCRIPTION
+        "Prepares sorted reports of the amount of traffic sent between
+        each pair of network addresses discovered by the probe."
+    ::= { hcRmonMIBGroups 11 }
+
+alHostHighCapacityGroup OBJECT-GROUP
+    OBJECTS { alHostHighCapacityInOverflowPkts,
+              alHostHighCapacityInPkts,
+              alHostHighCapacityOutOverflowPkts,
+              alHostHighCapacityOutPkts,
+              alHostHighCapacityInOverflowOctets,
+              alHostHighCapacityInOctets,
+              alHostHighCapacityOutOverflowOctets,
+              alHostHighCapacityOutOctets }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic, by protocol, sent from and to
+        each network address discovered by the probe."
+    ::= { hcRmonMIBGroups 12 }
+
+alMatrixHighCapacityGroup OBJECT-GROUP
+    OBJECTS { alMatrixSDHighCapacityOverflowPkts,
+              alMatrixSDHighCapacityPkts,
+              alMatrixSDHighCapacityOverflowOctets,
+              alMatrixSDHighCapacityOctets,
+              alMatrixDSHighCapacityOverflowPkts,
+              alMatrixDSHighCapacityPkts,
+              alMatrixDSHighCapacityOverflowOctets,
+              alMatrixDSHighCapacityOctets }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic, by protocol, sent between each
+        pair of network addresses discovered by the
+        probe."
+    ::= { hcRmonMIBGroups 13 }
+
+alMatrixTopNHighCapacityGroup OBJECT-GROUP
+    OBJECTS { alMatrixTopNHighCapacityProtocolDirLocalIndex,
+        alMatrixTopNHighCapacitySourceAddress,
+        alMatrixTopNHighCapacityDestAddress,
+        alMatrixTopNHighCapacityAppProtocolDirLocalIndex,
+        alMatrixTopNHighCapacityBasePktRate,
+        alMatrixTopNHighCapacityOverflowPktRate,
+        alMatrixTopNHighCapacityPktRate,
+        alMatrixTopNHighCapacityReverseBasePktRate,
+        alMatrixTopNHighCapacityReverseOverflowPktRate,
+        alMatrixTopNHighCapacityReversePktRate,
+        alMatrixTopNHighCapacityBaseOctetRate,
+        alMatrixTopNHighCapacityOverflowOctetRate,
+        alMatrixTopNHighCapacityOctetRate,
+        alMatrixTopNHighCapacityReverseBaseOctetRate,
+        alMatrixTopNHighCapacityReverseOverflowOctetRate,
+        alMatrixTopNHighCapacityReverseOctetRate }
+    STATUS  current
+    DESCRIPTION
+        "Prepares sorted reports of the amount of traffic per protocol
+        sent between each pair of network addresses discovered by the
+        probe."
+    ::= { hcRmonMIBGroups 14 }
+
+usrHistoryHighCapacityGroup OBJECT-GROUP
+    OBJECTS { usrHistoryHighCapacityOverflowAbsValue,
+        usrHistoryHighCapacityAbsValue }
+    STATUS  current
+    DESCRIPTION
+        "Provides user-defined collection of historical information
+        from MIB objects on the probe with scalability to statistics
+        from high-capacity networks."
+    ::= { hcRmonMIBGroups 15 }
+
+hcRMONInformationGroup OBJECT-GROUP
+    OBJECTS { hcRMONCapabilities }
+    STATUS  current
+    DESCRIPTION
+        "An indication of the high capacity RMON groups supported on
+        at least one interface by this probe."
+    ::= { hcRmonMIBGroups 16 }
+END
diff --git a/snmp_builder/mibs/HDSL2-SHDSL-LINE-MIB.mib b/snmp_builder/mibs/HDSL2-SHDSL-LINE-MIB.mib
new file mode 100644
index 0000000..0f994b3
--- /dev/null
+++ b/snmp_builder/mibs/HDSL2-SHDSL-LINE-MIB.mib
@@ -0,0 +1,2503 @@
+HDSL2-SHDSL-LINE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY,
+   OBJECT-TYPE,
+   Counter32,
+   Unsigned32,
+   Gauge32,
+   NOTIFICATION-TYPE,
+   Integer32,
+   transmission
+      FROM SNMPv2-SMI
+   RowStatus,
+   TEXTUAL-CONVENTION
+      FROM SNMPv2-TC
+   ifIndex
+      FROM IF-MIB
+   PerfCurrentCount,
+   PerfIntervalCount
+      FROM PerfHist-TC-MIB
+   SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB
+   MODULE-COMPLIANCE,
+   OBJECT-GROUP,
+   NOTIFICATION-GROUP
+      FROM SNMPv2-CONF;
+
+hdsl2ShdslMIB MODULE-IDENTITY
+   LAST-UPDATED "200512070000Z" -- December 7, 2005
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+      WG-URL:
+         http://www.ietf.org/html.charters/adslmib-charter.html
+      Info:       https://www1.ietf.org/mailman/listinfo/adslmib
+      Chair:      Mike Sneed
+                  Sand Channel Systems
+      Postal:     1210-203 Westview Ln
+                  Raleigh NC 27605  USA
+      Email:      sneedmike@hotmail.com
+      Phone:     +1 206 600 7022
+
+      Co-Chair    Bob Ray
+                  PESA Switching Systems, Inc.
+
+      Postal      330-A Wynn Drive
+                  Huntsville, AL 35805 USA
+      Phone       +1 256 726 9200 ext. 142
+
+      Co-editor:  Clay Sikes
+                  Zhone Technologies, Inc.
+      Postal:     8545 126th Ave. N.
+                  Largo, FL 33772 USA
+      Email:      csikes@zhone.com
+      Phone:      +1 727 530 8257
+
+      Co-editor:  Bob Ray
+                  PESA Switching Systems, Inc.
+      Postal:     330-A Wynn Drive
+                  Huntsville, AL 35805 USA
+      Email:      rray@pesa.com
+      Phone:      +1 256 726 9200 ext. 142
+
+      Co-editor:  Rajesh Abbi
+                  Alcatel USA
+      Postal:     2301 Sugar Bush Road
+                  Raleigh, NC 27612-3339 USA
+
+      Email:      Rajesh.Abbi@alcatel.com
+      Phone:      +1 919 850 6194"
+DESCRIPTION
+     "This MIB module defines a collection of objects for managing
+      HDSL2/SHDSL lines.  An agent may reside at either end of the
+      line; however, the MIB module is designed to require no
+      management communication between the modems beyond that
+      inherent in the low-level EOC line protocol as defined in
+      ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2
+      (for SHDSL lines).
+
+      Copyright (C) The Internet Society (2005).  This version of
+      this MIB module is part of RFC 4319; see the RFC itself for
+      full legal notices."
+
+REVISION    "200512070000Z" -- December 7, 2005
+DESCRIPTION "This version, published as RFC 4319.
+      The following changes have been made in this version:
+        1.  Added a 3rd and 4th wire pair.
+        2.  Modified all rates such that their rates are only
+            constrained by an unsigned 32-bit value and not by
+            what today's perceived technology limitations are.
+
+        3.  Clarified that the rates from RFC 3276 include
+            payload and any applicable framing and added
+            objects for payload-only rates.
+        4.  Added an object to indicate whether the
+            tip and ring are reversed on a wire pair.
+        5.  Added an object to display the activation state
+            of a wire pair.
+        6.  Added references as necessary for clarification.
+        7.  Added display hints to textual conventions as
+            necessary.
+        8.  Updated conformance statements as necessary.
+        9.  Some changes were due to IETF requirements and
+            RFC generation tools."
+
+REVISION    "200205090000Z" -- May 9, 2002
+DESCRIPTION "Initial version, published as RFC 3276."
+::= { transmission 48 }
+
+hdsl2ShdslMibObjects OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 1 }
+
+-- Textual Conventions used in this MIB module
+--
+
+Hdsl2ShdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS    current
+   DESCRIPTION
+     "A gauge associated with interface performance measurements in
+      a current 1-day (24 hour) measurement interval.
+
+      The value of this gauge starts at zero at the beginning of an
+      interval and is increased when associated events occur, until
+      the end of the 1-day interval.  At that time, the value of the
+      gauge is stored in the previous 1-day history interval, as
+      defined in a companion object of type
+      Hdsl2Shdsl1DayIntevalCount, and the current interval gauge
+      is restarted at zero.
+
+      In the case where the agent has no valid data available for
+      this interval, the corresponding object instance is not
+      available, and upon a retrieval request, a corresponding error
+      message shall be returned to indicate that this instance does
+      not exist.  Please note that zero is a valid value."
+   SYNTAX  Gauge32
+
+Hdsl2Shdsl1DayIntervalCount ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS    current
+   DESCRIPTION
+     "A counter associated with interface performance measurements
+      during the most previous 1-day (24 hour) measurement interval.
+      The value of this gauge is equal to the value of the current
+      day gauge, as defined in a companion object of type
+      Hdsl2ShdslPerfCurrDayCount, at the end of its most recent
+      interval.
+
+      In the case where the agent has no valid data available for
+      this interval, the corresponding object instance is not
+      available, and upon a retrieval request, a corresponding error
+      message shall be returned to indicate that this instance does
+      not exist."
+   SYNTAX  Gauge32
+
+Hdsl2ShdslPerfTimeElapsed ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS    current
+   DESCRIPTION
+     "The number of seconds that have elapsed since the beginning of
+      the current measurement period.  If, for some reason, such as
+      an adjustment in the system's time-of-day clock or the addition
+      of a leap second, the current interval exceeds the maximum
+      value, the agent will return the maximum value.
+
+      For 15-minute intervals, the range is limited to (0..899).
+      For 24-hour intervals, the range is limited to (0..86399)."
+   SYNTAX    Unsigned32(0..86399)
+
+Hdsl2ShdslPerfIntervalThreshold ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS    current
+   DESCRIPTION
+     "This convention defines a range of values that may be set in
+      a fault threshold alarm control.  As the number of seconds in
+      a 15-minute interval numbers at most 900, objects of this type
+      may have a range of 0...900, where the value of 0 disables the
+      alarm."
+   SYNTAX    Unsigned32(0..900)
+
+Hdsl2ShdslUnitId ::= TEXTUAL-CONVENTION
+   STATUS    current
+   DESCRIPTION
+     "This is the unique identification for all units in an
+      HDSL2/SHDSL span.  It is based on the EOC unit addressing
+      scheme with reference to the xtuC."
+   SYNTAX    INTEGER
+
+           {
+           xtuC(1),
+           xtuR(2),
+           xru1(3),
+           xru2(4),
+           xru3(5),
+           xru4(6),
+           xru5(7),
+           xru6(8),
+           xru7(9),
+           xru8(10)
+           }
+
+Hdsl2ShdslUnitSide ::= TEXTUAL-CONVENTION
+   STATUS    current
+   DESCRIPTION
+     "This is the referenced side of an HDSL2/SHDSL unit - Network
+      or Customer side.  The side facing the Network is the Network
+      side, while the side facing the Customer is the Customer side."
+   SYNTAX    INTEGER
+           {
+           networkSide(1),
+           customerSide(2)
+           }
+
+Hdsl2ShdslWirePair ::= TEXTUAL-CONVENTION
+   STATUS    current
+   DESCRIPTION
+     "This is the referenced pair of wires in an HDSL2/SHDSL segment.
+      HDSL2 only supports a single pair (wirePair1 or two wire),
+      SHDSL lines support an optional second pair (wirePair2 or four
+      wire), and G.shdsl.bis support an optional third pair
+      (wirePair3 or six wire) and an optional fourth pair
+      (wirePair4 or eight wire)."
+   SYNTAX    INTEGER
+           {
+           wirePair1(1),    -- two wire
+           wirePair2(2),    -- four wire
+           wirePair3(3),    -- six wire
+           wirePair4(4)     -- eight wire
+           }
+
+Hdsl2ShdslTransmissionModeType ::= TEXTUAL-CONVENTION
+   STATUS    current
+   DESCRIPTION
+     "Contains the regional setting of the HDSL2/SHDSL span,
+      represented as a bit-map of possible settings.  The various
+      bit positions are as follows:
+
+      Bit   Meaning      Description
+      1     region 1     Indicates ITU-T G.991.2 Annex A.
+      2     region 2     Indicates ITU-T G.991.2 Annex B."
+   SYNTAX      BITS
+           {
+           region1(0),
+           region2(1)
+           }
+
+Hdsl2ShdslClockReferenceType ::= TEXTUAL-CONVENTION
+   STATUS    current
+   DESCRIPTION
+     "The various STU-C symbol clock references for the
+      HDSL2/SHDSL span, represented as an enumeration."
+   SYNTAX    INTEGER
+          {
+          localClk(1),          -- Mode-1 per G991.2
+          networkClk(2),        -- Mode-2 per G991.2
+          dataOrNetworkClk(3),  -- Mode-3a per G991.2
+          dataClk(4)            -- Mode-3b per G991.2
+          }
+
+-- Span Configuration Group
+--
+
+hdsl2ShdslSpanConfTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF Hdsl2ShdslSpanConfEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+     "This table supports overall configuration of HDSL2/SHDSL
+      spans.  Entries in this table MUST be maintained in a
+      persistent manner."
+   ::= { hdsl2ShdslMibObjects 1 }
+
+hdsl2ShdslSpanConfEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslSpanConfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslSpanConfTable.  Each entry
+      represents the complete span in a single HDSL2/SHDSL line.
+      It is indexed by the ifIndex of the associated HDSL2/SHDSL
+      line."
+   INDEX { ifIndex }
+   ::= { hdsl2ShdslSpanConfTable 1 }
+
+Hdsl2ShdslSpanConfEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslSpanConfNumRepeaters          Unsigned32,
+   hdsl2ShdslSpanConfProfile               SnmpAdminString,
+   hdsl2ShdslSpanConfAlarmProfile          SnmpAdminString
+   }
+
+   hdsl2ShdslSpanConfNumRepeaters OBJECT-TYPE
+   SYNTAX      Unsigned32(0..8)
+   UNITS       "repeaters"
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object provisions the number of repeaters/regenerators
+      in this HDSL2/SHDSL span."
+   ::= { hdsl2ShdslSpanConfEntry 1 }
+
+hdsl2ShdslSpanConfProfile OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object is a pointer to a span configuration profile in
+      the hdsl2ShdslSpanConfProfileTable, which applies to this
+      span.  The value of this object is the index of the referenced
+      profile in the hdsl2ShdslSpanConfProfileTable.  Note that span
+      configuration profiles are only applicable to SHDSL lines.
+
+      HDSL2 lines MUST reference the default profile, 'DEFVAL'.
+      By default, this object will have the value 'DEFVAL'
+      (the index of the default profile).
+
+      Any attempt to set this object to a value that is not the value
+      of the index for an active entry in the profile table,
+      hdsl2ShdslSpanConfProfileTable, MUST be rejected."
+   ::= { hdsl2ShdslSpanConfEntry 2 }
+
+hdsl2ShdslSpanConfAlarmProfile OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object is a pointer to an alarm configuration profile in
+      the hdsl2ShdslEndpointAlarmConfProfileTable.  The value of
+      this object is the index of the referenced profile in the
+      hdsl2ShdslEndpointAlarmConfProfileTable.  The alarm
+      threshold configuration in the referenced profile will be
+
+      used by default for all segment endpoints in this span.
+      Individual endpoints may override this profile by explicitly
+      specifying some other profile in the
+      hdsl2ShdslEndpointConfTable.  By default, this object will
+      have the value 'DEFVAL' (the index of the default
+      profile).
+
+      Any attempt to set this object to a value that is not the value
+      of the index for an active entry in the profile table,
+      hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected."
+   ::= { hdsl2ShdslSpanConfEntry 3 }
+
+-- Span Status Group
+--
+
+hdsl2ShdslSpanStatusTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF Hdsl2ShdslSpanStatusEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+     "This table provides overall status information of
+      HDSL2/SHDSL spans.  This table contains live data from
+      equipment.  As such, it is NOT persistent."
+   ::= { hdsl2ShdslMibObjects 2 }
+
+hdsl2ShdslSpanStatusEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslSpanStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslSpanStatusTable.  Each entry
+      represents the complete span in a single HDSL2/SHDSL line.
+      It is indexed by the ifIndex of the associated HDSL2/SHDSL
+      line."
+   INDEX { ifIndex }
+   ::= { hdsl2ShdslSpanStatusTable 1 }
+
+Hdsl2ShdslSpanStatusEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslStatusNumAvailRepeaters        Unsigned32,
+   hdsl2ShdslStatusMaxAttainableLineRate    Unsigned32,
+   hdsl2ShdslStatusActualLineRate           Unsigned32,
+   hdsl2ShdslStatusTransmissionModeCurrent
+                        Hdsl2ShdslTransmissionModeType,
+   hdsl2ShdslStatusMaxAttainablePayloadRate Unsigned32,
+   hdsl2ShdslStatusActualPayloadRate        Unsigned32
+   }
+
+hdsl2ShdslStatusNumAvailRepeaters OBJECT-TYPE
+   SYNTAX      Unsigned32(0..8)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the actual number of repeaters/regenerators
+      discovered in this HDSL2/SHDSL span."
+   ::= { hdsl2ShdslSpanStatusEntry 1 }
+
+hdsl2ShdslStatusMaxAttainableLineRate OBJECT-TYPE
+   SYNTAX      Unsigned32(0..4294967295)
+   UNITS       "bps"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the maximum attainable line rate in this HDSL2/SHDSL
+      span.  This object provides the maximum rate the line is
+      capable of achieving.  This is based upon measurements made
+      during line probing.  This rate includes payload (user data)
+      and any applicable framing overhead."
+   ::= { hdsl2ShdslSpanStatusEntry 2 }
+
+hdsl2ShdslStatusActualLineRate OBJECT-TYPE
+   SYNTAX      Unsigned32(0..4294967295)
+   UNITS       "bps"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the actual line rate in this HDSL2/SHDSL span.  This
+      SHOULD equal ifSpeed.  This rate includes payload (user data)
+      and any applicable framing overhead"
+   ::= { hdsl2ShdslSpanStatusEntry 3 }
+
+hdsl2ShdslStatusTransmissionModeCurrent OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslTransmissionModeType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the current Power Spectral Density (PSD) regional
+      setting of the HDSL2/SHDSL span."
+   ::= { hdsl2ShdslSpanStatusEntry 4 }
+
+hdsl2ShdslStatusMaxAttainablePayloadRate OBJECT-TYPE
+   SYNTAX      Unsigned32(0..4294967295)
+   UNITS       "bps"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the maximum attainable payload (user data)
+      line rate in this HDSL2/SHDSL span.  This object provides
+      the maximum rate the line is capable of achieving.  This
+      is based upon measurements made during line probing.  Any
+      framing overhead is not included."
+   ::= { hdsl2ShdslSpanStatusEntry 5 }
+
+hdsl2ShdslStatusActualPayloadRate OBJECT-TYPE
+   SYNTAX      Unsigned32(0..4294967295)
+   UNITS       "bps"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the actual line rate in this HDSL2/SHDSL span.  Any
+      framing overhead is not included."
+   ::= { hdsl2ShdslSpanStatusEntry 6 }
+
+-- Unit Inventory Group
+--
+
+hdsl2ShdslInventoryTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF Hdsl2ShdslInventoryEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+     "This table supports retrieval of unit inventory information
+      available via the EOC from units in an HDSL2/SHDSL line.
+
+      Entries in this table are dynamically created during the
+      line discovery process.  The life cycle for these entries
+      is as follows:
+
+         - xtu discovers a device, either a far-end xtu or an xru
+         - an inventory table entry is created for the device
+         - the line goes down for whatever reason
+         - inventory table entries for unreachable devices are
+           destroyed
+
+      As these entries are created/destroyed dynamically, they
+      are NOT persistent."
+   ::= { hdsl2ShdslMibObjects 3 }
+
+hdsl2ShdslInventoryEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslInventoryEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslInventoryTable.  Each entry
+
+      represents inventory information for a single unit in an
+      HDSL2/SHDSL line.  It is indexed by the ifIndex of the
+      HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the
+      associated unit."
+   INDEX { ifIndex, hdsl2ShdslInvIndex }
+   ::= { hdsl2ShdslInventoryTable 1 }
+
+Hdsl2ShdslInventoryEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslInvIndex                      Hdsl2ShdslUnitId,
+   hdsl2ShdslInvVendorID                   OCTET STRING,
+   hdsl2ShdslInvVendorModelNumber          OCTET STRING,
+   hdsl2ShdslInvVendorSerialNumber         OCTET STRING,
+   hdsl2ShdslInvVendorEOCSoftwareVersion   Integer32,
+   hdsl2ShdslInvStandardVersion            Integer32,
+   hdsl2ShdslInvVendorListNumber           OCTET STRING,
+   hdsl2ShdslInvVendorIssueNumber          OCTET STRING,
+   hdsl2ShdslInvVendorSoftwareVersion      OCTET STRING,
+   hdsl2ShdslInvEquipmentCode              OCTET STRING,
+   hdsl2ShdslInvVendorOther                OCTET STRING,
+   hdsl2ShdslInvTransmissionModeCapability
+                         Hdsl2ShdslTransmissionModeType
+   }
+
+hdsl2ShdslInvIndex OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslUnitId
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "Each entry in this table corresponds to a physical element
+      in an HDSL2/SHDSL span.  It is based on the EOC unit addressing
+      scheme with reference to the xtuC."
+   ::= { hdsl2ShdslInventoryEntry 1 }
+
+hdsl2ShdslInvVendorID OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(8))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor ID as reported in an Inventory Response message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 25-32."
+   ::= { hdsl2ShdslInventoryEntry 2 }
+
+hdsl2ShdslInvVendorModelNumber OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(12))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor model number as reported in an Inventory Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 33-44."
+   ::= { hdsl2ShdslInventoryEntry 3 }
+
+hdsl2ShdslInvVendorSerialNumber OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(12))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor serial number as reported in an Inventory Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 45-56."
+   ::= { hdsl2ShdslInventoryEntry 4 }
+
+hdsl2ShdslInvVendorEOCSoftwareVersion OBJECT-TYPE
+   SYNTAX      Integer32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor EOC version as reported in a Discovery Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.2, Discovery response - Message ID
+      129, Octet 12."
+   ::= { hdsl2ShdslInventoryEntry 5 }
+
+hdsl2ShdslInvStandardVersion OBJECT-TYPE
+   SYNTAX      Integer32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Version of the HDSL2/SHDSL standard implemented, as reported
+      in an Inventory Response message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octet 2."
+   ::= { hdsl2ShdslInventoryEntry 6 }
+
+hdsl2ShdslInvVendorListNumber OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(3))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor list number as reported in an Inventory Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 3-5."
+   ::= { hdsl2ShdslInventoryEntry 7 }
+
+hdsl2ShdslInvVendorIssueNumber OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(2))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor issue number as reported in an Inventory Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 6-7."
+   ::= { hdsl2ShdslInventoryEntry 8 }
+
+hdsl2ShdslInvVendorSoftwareVersion OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(6))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Vendor software version as reported in an Inventory Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 8-13."
+   ::= { hdsl2ShdslInventoryEntry 9 }
+
+hdsl2ShdslInvEquipmentCode OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(10))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Equipment code conforming to ANSI T1.213, Coded Identification
+      of Equipment Entities."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 14-23."
+   ::= { hdsl2ShdslInventoryEntry 10 }
+
+hdsl2ShdslInvVendorOther OBJECT-TYPE
+   SYNTAX      OCTET STRING(SIZE(12))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Other vendor information as reported in an Inventory Response
+      message."
+   REFERENCE
+     "G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+      130, Octets 57-68."
+   ::= { hdsl2ShdslInventoryEntry 11 }
+
+hdsl2ShdslInvTransmissionModeCapability OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslTransmissionModeType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the transmission mode capability of the SHDSL unit."
+   ::= { hdsl2ShdslInventoryEntry 12 }
+
+-- Segment Endpoint Configuration Group
+--
+
+hdsl2ShdslEndpointConfTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2ShdslEndpointConfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table supports configuration parameters for segment
+      endpoints in an HDSL2/SHDSL line.  As this table is indexed
+      by ifIndex, it MUST be maintained in a persistent manner."
+   ::= { hdsl2ShdslMibObjects 4 }
+
+hdsl2ShdslEndpointConfEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslEndpointConfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslEndpointConfTable.  Each entry
+      represents a single segment endpoint in an HDSL2/SHDSL line.
+      It is indexed by the ifIndex of the HDSL2/SHDSL line, the
+      UnitId of the associated unit, the side of the unit, and the
+      wire pair of the associated modem."
+   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
+           hdsl2ShdslEndpointWirePair}
+   ::= { hdsl2ShdslEndpointConfTable 1 }
+
+Hdsl2ShdslEndpointConfEntry ::=
+   SEQUENCE
+   {
+
+   hdsl2ShdslEndpointSide                   Hdsl2ShdslUnitSide,
+   hdsl2ShdslEndpointWirePair               Hdsl2ShdslWirePair,
+   hdsl2ShdslEndpointAlarmConfProfile       SnmpAdminString
+   }
+
+hdsl2ShdslEndpointSide OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslUnitSide
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "The side of the unit associated with this segment endpoint --
+      Network/Customer side -- as per the Hdsl2ShdslUnitSide textual
+      convention."
+   ::= { hdsl2ShdslEndpointConfEntry 1 }
+
+hdsl2ShdslEndpointWirePair OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslWirePair
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "The wire pair of the modem associated with this segment
+      endpoint as per the Hdsl2ShdslWirePair textual convention."
+   ::= { hdsl2ShdslEndpointConfEntry 2 }
+
+hdsl2ShdslEndpointAlarmConfProfile OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object configures the alarm threshold values to be used
+      for this segment endpoint.  The values are obtained from the
+      alarm configuration profile referenced by this object.  The
+      value of this object is the index of the referenced profile in
+      the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a
+      zero-length SnmpAdminString).  If the value is a zero-length
+      SnmpAdminString, the endpoint uses the default Alarm
+      Configuration Profile for the associated span as per the
+      hdsl2ShdslSpanConfAlarmProfile object in the
+      hdsl2ShdslSpanConfTable.  The default value of this object is
+      a zero-length SnmpAdminString.
+
+      Any attempt to set this object to a value that is not the value
+      of the index for an active entry in the profile table,
+      hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected."
+   ::= { hdsl2ShdslEndpointConfEntry 3 }
+
+-- Segment Endpoint Current Status/Performance Group
+--
+
+hdsl2ShdslEndpointCurrTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2ShdslEndpointCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table contains current status and performance information
+      for segment endpoints in HDSL2/SHDSL lines.  As with other
+      tables in this MIB module indexed by ifIndex, entries in this
+      table MUST be maintained in a persistent manner."
+   ::= { hdsl2ShdslMibObjects 5 }
+
+hdsl2ShdslEndpointCurrEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslEndpointCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslEndpointCurrTable.  Each entry
+      contains status and performance information relating to a
+      single segment endpoint.  It is indexed by the ifIndex of the
+      HDSL2/SHDSL line, the UnitId of the associated unit, the side
+      of the unit, and the wire pair of the associated modem."
+   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
+           hdsl2ShdslEndpointWirePair }
+   ::= { hdsl2ShdslEndpointCurrTable 1 }
+
+Hdsl2ShdslEndpointCurrEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslEndpointCurrAtn                Integer32,
+   hdsl2ShdslEndpointCurrSnrMgn             Integer32,
+   hdsl2ShdslEndpointCurrStatus             BITS,
+   hdsl2ShdslEndpointES                     Counter32,
+   hdsl2ShdslEndpointSES                    Counter32,
+   hdsl2ShdslEndpointCRCanomalies           Counter32,
+   hdsl2ShdslEndpointLOSWS                  Counter32,
+   hdsl2ShdslEndpointUAS                    Counter32,
+   hdsl2ShdslEndpointCurr15MinTimeElapsed
+                            Hdsl2ShdslPerfTimeElapsed,
+   hdsl2ShdslEndpointCurr15MinES            PerfCurrentCount,
+   hdsl2ShdslEndpointCurr15MinSES           PerfCurrentCount,
+   hdsl2ShdslEndpointCurr15MinCRCanomalies  PerfCurrentCount,
+   hdsl2ShdslEndpointCurr15MinLOSWS         PerfCurrentCount,
+   hdsl2ShdslEndpointCurr15MinUAS           PerfCurrentCount,
+   hdsl2ShdslEndpointCurr1DayTimeElapsed
+                                   Hdsl2ShdslPerfTimeElapsed,
+   hdsl2ShdslEndpointCurr1DayES
+                                  Hdsl2ShdslPerfCurrDayCount,
+   hdsl2ShdslEndpointCurr1DaySES
+
+                                  Hdsl2ShdslPerfCurrDayCount,
+   hdsl2ShdslEndpointCurr1DayCRCanomalies
+                                  Hdsl2ShdslPerfCurrDayCount,
+   hdsl2ShdslEndpointCurr1DayLOSWS
+                                  Hdsl2ShdslPerfCurrDayCount,
+   hdsl2ShdslEndpointCurr1DayUAS
+                                  Hdsl2ShdslPerfCurrDayCount,
+   hdsl2ShdslEndpointCurrTipRingReversal    INTEGER,
+   hdsl2ShdslEndpointCurrActivationState    INTEGER
+   }
+
+hdsl2ShdslEndpointCurrAtn OBJECT-TYPE
+   SYNTAX      Integer32(-127..128)
+   UNITS       "dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The current loop attenuation for this endpoint as reported in
+      a Network or Customer Side Performance Status message."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 1 }
+
+hdsl2ShdslEndpointCurrSnrMgn OBJECT-TYPE
+   SYNTAX      Integer32(-127..128)
+   UNITS       "dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The current SNR margin for this endpoint as reported in a
+      Status Response/SNR message."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 2 }
+
+hdsl2ShdslEndpointCurrStatus OBJECT-TYPE
+   SYNTAX      BITS
+               {
+               noDefect(0),
+               powerBackoff(1),
+               deviceFault(2),
+               dcContinuityFault(3),
+               snrMarginAlarm(4),
+               loopAttenuationAlarm(5),
+               loswFailureAlarm(6),
+               configInitFailure(7),
+               protocolInitFailure(8),
+               noNeighborPresent(9),
+               loopbackActive(10)
+               }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Contains the current state of the endpoint.  This is a
+      bit-map of possible conditions.  The various bit positions
+      are as follows:
+
+      noDefect               There are no defects on the line.
+
+      powerBackoff           Indicates enhanced Power Backoff.
+
+      deviceFault            Indicates that a vendor-dependent
+                             diagnostic or self-test fault
+                             has been detected.
+
+      dcContinuityFault      Indicates vendor-dependent
+                             conditions that interfere with
+                             span powering such as short and
+                             open circuits.
+
+      snrMarginAlarm         Indicates that the SNR margin
+                             has dropped below the alarm threshold.
+
+      loopAttenuationAlarm   Indicates that the loop attenuation
+                             exceeds the alarm threshold.
+
+      loswFailureAlarm       Indicates a forward LOSW alarm.
+
+      configInitFailure      Endpoint failure during initialization
+                             due to paired endpoint not able to
+                             support requested configuration.
+
+      protocolInitFailure    Endpoint failure during initialization
+                             due to incompatible protocol used by
+                             the paired endpoint.
+
+      noNeighborPresent      Endpoint failure during initialization
+                             due to no activation sequence detected
+                             from paired endpoint.
+
+      loopbackActive         A loopback is currently active at this
+                             segment endpoint.
+
+      This is intended to supplement ifOperStatus.  Note that there
+      is a 1:1 relationship between the status bits defined in this
+      object and the notification thresholds defined elsewhere in
+      this MIB module."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 3 }
+
+hdsl2ShdslEndpointES OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Count of Errored Seconds (ES) on this endpoint since the xU
+      was last restarted."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 4 }
+
+hdsl2ShdslEndpointSES OBJECT-TYPE
+   SYNTAX       Counter32
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Severely Errored Seconds (SES) on this endpoint
+      since the xU was last restarted."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 5 }
+
+hdsl2ShdslEndpointCRCanomalies OBJECT-TYPE
+   SYNTAX       Counter32
+   UNITS        "detected CRC Anomalies"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of CRC anomalies on this endpoint since the xU was
+      last restarted."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 6 }
+
+hdsl2ShdslEndpointLOSWS OBJECT-TYPE
+   SYNTAX       Counter32
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Loss of Sync Word (LOSW) Seconds on this endpoint
+      since the xU was last restarted."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 7 }
+
+hdsl2ShdslEndpointUAS OBJECT-TYPE
+   SYNTAX       Counter32
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Unavailable Seconds (UAS) on this endpoint since
+      the xU was last restarted."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 8 }
+
+hdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfTimeElapsed
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Total elapsed seconds in the current 15-minute interval."
+   ::= { hdsl2ShdslEndpointCurrEntry 9 }
+
+hdsl2ShdslEndpointCurr15MinES OBJECT-TYPE
+   SYNTAX       PerfCurrentCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Errored Seconds (ES) in the current 15-minute
+      interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 10 }
+
+hdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE
+   SYNTAX       PerfCurrentCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Severely Errored Seconds (SES) in the current
+      15-minute interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 11 }
+
+hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE
+   SYNTAX       PerfCurrentCount
+   UNITS        "detected CRC Anomalies"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of CRC anomalies in the current 15-minute interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 12 }
+
+hdsl2ShdslEndpointCurr15MinLOSWS OBJECT-TYPE
+   SYNTAX       PerfCurrentCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Loss of Sync Word (LOSW) Seconds in the current
+      15-minute interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 13 }
+
+hdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE
+   SYNTAX       PerfCurrentCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Unavailable Seconds (UAS) in the current 15-minute
+      interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 14 }
+
+hdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfTimeElapsed
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Number of seconds that have elapsed since the beginning of
+      the current 1-day interval."
+   ::= { hdsl2ShdslEndpointCurrEntry 15 }
+
+hdsl2ShdslEndpointCurr1DayES OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfCurrDayCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Errored Seconds (ES) during the current day as
+      measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 16 }
+
+hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfCurrDayCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Severely Errored Seconds (SES) during the current
+      day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 17 }
+
+hdsl2ShdslEndpointCurr1DayCRCanomalies OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfCurrDayCount
+   UNITS        "detected CRC Anomalies"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of CRC anomalies during the current day as measured
+      by hdsl2ShdslEndpointCurr1DayTimeElapsed."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 18 }
+
+hdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfCurrDayCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Loss of Sync Word (LOSW) Seconds during the current
+      day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 19 }
+
+hdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfCurrDayCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Unavailable Seconds (UAS) during the current day as
+      measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2ShdslEndpointCurrEntry 20 }
+
+hdsl2ShdslEndpointCurrTipRingReversal OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               normal(1),
+               reversed(2)
+               }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the state of the tip/ring for the
+      wire pair."
+   ::= { hdsl2ShdslEndpointCurrEntry 21 }
+
+hdsl2ShdslEndpointCurrActivationState OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               preActivation(1),  -- PreTrain
+               activation(2),     -- Training
+               data(3)            -- Trained
+               }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the activation or training state of
+      the wire pair."
+   REFERENCE   "ITU-T G.991.2, Section 6.2 PMD Activation Sequence"
+   ::= { hdsl2ShdslEndpointCurrEntry 22 }
+
+-- Segment Endpoint 15-Minute Interval Status/Performance Group
+--
+
+hdsl2Shdsl15MinIntervalTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table provides one row for each HDSL2/SHDSL endpoint
+      performance data collection interval.  This table contains
+      live data from equipment.  As such, it is NOT persistent."
+   ::= { hdsl2ShdslMibObjects 6 }
+
+hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE
+   SYNTAX      Hdsl2Shdsl15MinIntervalEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2Shdsl15MinIntervalTable."
+   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
+           hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}
+   ::= { hdsl2Shdsl15MinIntervalTable 1 }
+
+Hdsl2Shdsl15MinIntervalEntry ::=
+   SEQUENCE
+   {
+   hdsl2Shdsl15MinIntervalNumber         Unsigned32,
+   hdsl2Shdsl15MinIntervalES             PerfIntervalCount,
+   hdsl2Shdsl15MinIntervalSES            PerfIntervalCount,
+   hdsl2Shdsl15MinIntervalCRCanomalies   PerfIntervalCount,
+   hdsl2Shdsl15MinIntervalLOSWS          PerfIntervalCount,
+   hdsl2Shdsl15MinIntervalUAS            PerfIntervalCount
+   }
+
+hdsl2Shdsl15MinIntervalNumber OBJECT-TYPE
+   SYNTAX      Unsigned32(1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "Performance Data Interval number.  Interval 1 is the most
+      recent previous interval; interval 96 is 24 hours ago.
+      Intervals 2..96 are optional."
+   ::= { hdsl2Shdsl15MinIntervalEntry 1 }
+
+hdsl2Shdsl15MinIntervalES OBJECT-TYPE
+   SYNTAX      PerfIntervalCount
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Count of Errored Seconds (ES) during the interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl15MinIntervalEntry 2 }
+
+hdsl2Shdsl15MinIntervalSES OBJECT-TYPE
+   SYNTAX      PerfIntervalCount
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Count of Severely Errored Seconds (SES) during the interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl15MinIntervalEntry 3 }
+
+hdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE
+   SYNTAX      PerfIntervalCount
+   UNITS       "detected CRC Anomalies"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Count of CRC anomalies during the interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl15MinIntervalEntry 4 }
+
+hdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE
+   SYNTAX      PerfIntervalCount
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Count of Loss of Sync Word (LOSW) Seconds during the
+      interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl15MinIntervalEntry 5 }
+
+hdsl2Shdsl15MinIntervalUAS OBJECT-TYPE
+   SYNTAX      PerfIntervalCount
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "Count of Unavailable Seconds (UAS) during the interval."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl15MinIntervalEntry 6 }
+
+-- Segment Endpoint 1-Day Interval Status/Performance Group
+--
+
+hdsl2Shdsl1DayIntervalTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table provides one row for each HDSL2/SHDSL endpoint
+      performance data collection interval.  This table contains
+      live data from equipment.  As such, it is NOT persistent."
+   ::= { hdsl2ShdslMibObjects 7 }
+
+hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE
+   SYNTAX      Hdsl2Shdsl1DayIntervalEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2Shdsl1DayIntervalTable."
+   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
+           hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }
+   ::= { hdsl2Shdsl1DayIntervalTable 1 }
+
+Hdsl2Shdsl1DayIntervalEntry ::=
+   SEQUENCE
+   {
+   hdsl2Shdsl1DayIntervalNumber         Unsigned32,
+   hdsl2Shdsl1DayIntervalMoniSecs       Hdsl2ShdslPerfTimeElapsed,
+   hdsl2Shdsl1DayIntervalES             Hdsl2Shdsl1DayIntervalCount,
+   hdsl2Shdsl1DayIntervalSES            Hdsl2Shdsl1DayIntervalCount,
+   hdsl2Shdsl1DayIntervalCRCanomalies   Hdsl2Shdsl1DayIntervalCount,
+   hdsl2Shdsl1DayIntervalLOSWS          Hdsl2Shdsl1DayIntervalCount,
+   hdsl2Shdsl1DayIntervalUAS            Hdsl2Shdsl1DayIntervalCount
+   }
+
+hdsl2Shdsl1DayIntervalNumber OBJECT-TYPE
+   SYNTAX      Unsigned32(1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "History Data Interval number.  Interval 1 is the most
+      recent previous day; interval 30 is 30 days ago.  Intervals
+      2..30 are optional."
+   ::= { hdsl2Shdsl1DayIntervalEntry 1 }
+
+hdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE
+   SYNTAX       Hdsl2ShdslPerfTimeElapsed
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "The amount of time in the 1-day interval over which the
+      performance monitoring information is actually counted.
+      This value will be the same as the interval duration except
+      in a situation where performance monitoring data could not
+      be collected for any reason."
+   ::= { hdsl2Shdsl1DayIntervalEntry 2 }
+
+hdsl2Shdsl1DayIntervalES OBJECT-TYPE
+   SYNTAX       Hdsl2Shdsl1DayIntervalCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Errored Seconds (ES) during the 1-day interval as
+      measured by hdsl2Shdsl1DayIntervalMoniSecs."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl1DayIntervalEntry 3 }
+
+hdsl2Shdsl1DayIntervalSES OBJECT-TYPE
+   SYNTAX       Hdsl2Shdsl1DayIntervalCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Severely Errored Seconds (SES) during the 1-day
+
+      interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl1DayIntervalEntry 4 }
+
+hdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE
+   SYNTAX       Hdsl2Shdsl1DayIntervalCount
+   UNITS        "detected CRC Anomalies"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of CRC anomalies during the 1-day interval as
+      measured by hdsl2Shdsl1DayIntervalMoniSecs."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl1DayIntervalEntry 5 }
+
+hdsl2Shdsl1DayIntervalLOSWS OBJECT-TYPE
+   SYNTAX       Hdsl2Shdsl1DayIntervalCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Loss of Sync Word (LOSW) Seconds during the 1-day
+      interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl1DayIntervalEntry 6 }
+
+hdsl2Shdsl1DayIntervalUAS OBJECT-TYPE
+   SYNTAX       Hdsl2Shdsl1DayIntervalCount
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "Count of Unavailable Seconds (UAS) during the 1-day interval
+      as measured by hdsl2Shdsl1DayIntervalMoniSecs."
+   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
+   ::= { hdsl2Shdsl1DayIntervalEntry 7 }
+
+-- Maintenance Group
+--
+
+hdsl2ShdslEndpointMaintTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2ShdslEndpointMaintEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table supports maintenance operations (e.g., loopbacks)
+      to be performed on HDSL2/SHDSL segment endpoints.  This table
+      contains live data from equipment.  As such, it is NOT
+
+      persistent."
+   ::= { hdsl2ShdslMibObjects 8 }
+
+hdsl2ShdslEndpointMaintEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslEndpointMaintEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslEndpointMaintTable.  Each entry
+      corresponds to a single segment endpoint and is indexed by the
+      ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
+      unit, and the side of the unit."
+   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide }
+   ::= { hdsl2ShdslEndpointMaintTable 1 }
+
+Hdsl2ShdslEndpointMaintEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslMaintLoopbackConfig      INTEGER,
+   hdsl2ShdslMaintTipRingReversal     INTEGER,
+   hdsl2ShdslMaintPowerBackOff        INTEGER,
+   hdsl2ShdslMaintSoftRestart         INTEGER
+   }
+
+hdsl2ShdslMaintLoopbackConfig OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               noLoopback(1),
+               normalLoopback(2),
+               specialLoopback(3)
+               }
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object controls configuration of loopbacks for the
+      associated segment endpoint.  The status of the loopback
+      is obtained via the hdsl2ShdslEndpointCurrStatus object."
+   ::= { hdsl2ShdslEndpointMaintEntry 1 }
+
+hdsl2ShdslMaintTipRingReversal OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               normal(1),
+               reversed(2)
+               }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the state of the tip/ring pair at the
+      associated segment endpoint."
+   ::= { hdsl2ShdslEndpointMaintEntry 2 }
+
+hdsl2ShdslMaintPowerBackOff OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               default(1),
+               enhanced(2)
+               }
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object configures the receiver at the associated
+      segment endpoint to operate in default or enhanced power
+      backoff mode."
+   ::= { hdsl2ShdslEndpointMaintEntry 3 }
+
+hdsl2ShdslMaintSoftRestart OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               ready(1),
+               restart(2)
+               }
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object enables the manager to trigger a soft restart
+      of the modem at the associated segment endpoint.  The
+      manager may only set this object to the 'restart(2)'
+      value, which initiates a restart.  The agent will perform a
+      restart after approximately 5 seconds.  Following the 5 second
+      period, the agent will restore the object to the 'ready(1)'
+      state."
+   ::= { hdsl2ShdslEndpointMaintEntry 4 }
+
+hdsl2ShdslUnitMaintTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2ShdslUnitMaintEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table supports maintenance operations for units in a
+      HDSL2/SHDSL line.  Entries in this table MUST be maintained
+      in a persistent manner."
+   ::= { hdsl2ShdslMibObjects 9 }
+
+hdsl2ShdslUnitMaintEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslUnitMaintEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry in the hdsl2ShdslUnitMaintTable.  Each entry
+      corresponds to a single unit and is indexed by the
+      ifIndex of the HDSL2/SHDSL line and the UnitId of the
+      associated unit."
+   INDEX { ifIndex, hdsl2ShdslInvIndex  }
+   ::= { hdsl2ShdslUnitMaintTable 1 }
+
+Hdsl2ShdslUnitMaintEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslMaintLoopbackTimeout     Integer32,
+   hdsl2ShdslMaintUnitPowerSource     INTEGER
+   }
+
+hdsl2ShdslMaintLoopbackTimeout OBJECT-TYPE
+   SYNTAX      Integer32(0..4095)
+   UNITS       "minutes"
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object configures the timeout value for loopbacks
+      initiated at segments endpoints contained in the associated
+      unit.  A value of 0 disables the timeout."
+   ::= { hdsl2ShdslUnitMaintEntry 1 }
+
+hdsl2ShdslMaintUnitPowerSource OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               local(1),
+               span(2)
+               }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the DC power source being used by the
+      associated unit."
+   ::= { hdsl2ShdslUnitMaintEntry 2 }
+
+-- Span Configuration Profile Group
+--
+
+hdsl2ShdslSpanConfProfileTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2ShdslSpanConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table supports definitions of span configuration
+      profiles for SHDSL lines.  HDSL2 does not support these
+      configuration options.  This table MUST be maintained
+      in a persistent manner."
+   ::= { hdsl2ShdslMibObjects 10 }
+
+hdsl2ShdslSpanConfProfileEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslSpanConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "Each entry corresponds to a single span configuration
+      profile.  Each profile contains a set of span configuration
+      parameters.  The configuration parameters in a profile are
+      applied to those lines referencing that profile (see the
+      hdsl2ShdslSpanConfProfile object).  Profiles may be
+      created/deleted using the row creation/deletion mechanism
+      via hdsl2ShdslSpanConfProfileRowStatus.  If an active
+      entry is referenced in hdsl2ShdslSpanConfProfile, the
+      entry MUST remain active until all references are removed."
+   INDEX { IMPLIED hdsl2ShdslSpanConfProfileName }
+   ::= { hdsl2ShdslSpanConfProfileTable 1 }
+
+Hdsl2ShdslSpanConfProfileEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslSpanConfProfileName               SnmpAdminString,
+   hdsl2ShdslSpanConfWireInterface             INTEGER,
+   hdsl2ShdslSpanConfMinLineRate               Unsigned32,
+   hdsl2ShdslSpanConfMaxLineRate               Unsigned32,
+   hdsl2ShdslSpanConfPSD                       INTEGER,
+   hdsl2ShdslSpanConfTransmissionMode
+                           Hdsl2ShdslTransmissionModeType,
+   hdsl2ShdslSpanConfRemoteEnabled             INTEGER,
+   hdsl2ShdslSpanConfPowerFeeding              INTEGER,
+   hdsl2ShdslSpanConfCurrCondTargetMarginDown  Integer32,
+   hdsl2ShdslSpanConfWorstCaseTargetMarginDown Integer32,
+   hdsl2ShdslSpanConfCurrCondTargetMarginUp    Integer32,
+   hdsl2ShdslSpanConfWorstCaseTargetMarginUp   Integer32,
+   hdsl2ShdslSpanConfUsedTargetMargins         BITS,
+   hdsl2ShdslSpanConfReferenceClock
+                             Hdsl2ShdslClockReferenceType,
+   hdsl2ShdslSpanConfLineProbeEnable           INTEGER,
+   hdsl2ShdslSpanConfProfileRowStatus          RowStatus
+   }
+
+hdsl2ShdslSpanConfProfileName OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is the unique index associated with this profile.
+      Entries in this table are referenced via the object
+      hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry."
+   ::= { hdsl2ShdslSpanConfProfileEntry 1 }
+
+hdsl2ShdslSpanConfWireInterface OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               twoWire(1),
+               fourWire(2),
+               sixWire(3),
+               eightWire(4)
+               }
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the two-wire or optional four-wire,
+      six-wire, or eight-wire operation for SHDSL lines."
+   DEFVAL      { twoWire }
+   ::= { hdsl2ShdslSpanConfProfileEntry 2 }
+
+hdsl2ShdslSpanConfMinLineRate OBJECT-TYPE
+   SYNTAX      Unsigned32(0..4294967295)
+   UNITS       "bps"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the minimum transmission rate for
+      the associated SHDSL Line in bits-per-second (bps) and includes
+      both payload (user data) and any applicable framing overhead.
+      If the minimum line rate equals the maximum line rate
+      (hdsl2ShdslSpanMaxLineRate), the line rate is considered
+      'fixed'.  If the minimum line rate is less than the
+      maximum line rate, the line rate is considered
+      'rate-adaptive'."
+   DEFVAL      { 1552000 }
+   ::= { hdsl2ShdslSpanConfProfileEntry 3 }
+
+hdsl2ShdslSpanConfMaxLineRate OBJECT-TYPE
+   SYNTAX      Unsigned32(0..4294967295)
+   UNITS       "bps"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the maximum transmission rate for
+      the associated SHDSL Line in bits-per-second (bps) and includes
+      both payload (user data) and any applicable framing overhead.
+      If the minimum line rate equals the maximum line rate
+      (hdsl2ShdslSpanMaxLineRate), the line rate is considered
+      'fixed'.  If the minimum line rate is less than the
+      maximum line rate, the line rate is considered
+      'rate-adaptive'."
+   DEFVAL      { 1552000 }
+   ::= { hdsl2ShdslSpanConfProfileEntry 4 }
+
+hdsl2ShdslSpanConfPSD OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               symmetric(1),
+               asymmetric(2)
+               }
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures use of symmetric/asymmetric PSD (Power
+      Spectral Density) Mask for the associated SHDSL Line.  Support
+      for symmetric PSD is mandatory for all supported data rates.
+      Support for asymmetric PSD is optional."
+   DEFVAL      { symmetric }
+   ::= { hdsl2ShdslSpanConfProfileEntry 5 }
+
+hdsl2ShdslSpanConfTransmissionMode OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslTransmissionModeType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object specifies the regional setting for the SHDSL
+      line."
+   DEFVAL      { { region1 } }
+   ::= { hdsl2ShdslSpanConfProfileEntry 6 }
+
+hdsl2ShdslSpanConfRemoteEnabled OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               enabled(1),
+               disabled(2)
+               }
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object enables/disables support for remote management
+      of the units in an SHDSL line from the STU-R via the EOC."
+   DEFVAL      { enabled }
+   ::= { hdsl2ShdslSpanConfProfileEntry 7 }
+
+hdsl2ShdslSpanConfPowerFeeding OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               noPower(1),
+               powerFeed(2),
+               wettingCurrent(3)
+               }
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object enables/disables support for optional power
+      feeding in an SHDSL line."
+   DEFVAL      { noPower }
+   ::= { hdsl2ShdslSpanConfProfileEntry 8 }
+
+hdsl2ShdslSpanConfCurrCondTargetMarginDown OBJECT-TYPE
+   SYNTAX      Integer32(-10..21)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object specifies the downstream current condition target
+      SNR margin for an SHDSL line.  The SNR margin is the difference
+      between the desired SNR and the actual SNR.  Target SNR margin
+      is the desired SNR margin for a unit."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslSpanConfProfileEntry 9 }
+
+hdsl2ShdslSpanConfWorstCaseTargetMarginDown OBJECT-TYPE
+   SYNTAX      Integer32(-10..21)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object specifies the downstream worst-case target SNR
+      margin for an SHDSL line.  The SNR margin is the difference
+      between the desired SNR and the actual SNR.  Target SNR
+      margin is the desired SNR margin for a unit."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslSpanConfProfileEntry 10 }
+
+hdsl2ShdslSpanConfCurrCondTargetMarginUp OBJECT-TYPE
+   SYNTAX      Integer32(-10..21)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object specifies the upstream current-condition target
+      SNR margin for an SHDSL line.  The SNR margin is the difference
+      between the desired SNR and the actual SNR.  Target SNR margin
+      is the desired SNR margin for a unit."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslSpanConfProfileEntry 11 }
+
+hdsl2ShdslSpanConfWorstCaseTargetMarginUp OBJECT-TYPE
+   SYNTAX      Integer32(-10..21)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object specifies the upstream worst-case target SNR
+      margin for an SHDSL line.  The SNR margin is the difference
+      between the desired SNR and the actual SNR.  Target SNR margin
+      is the desired SNR margin for a unit."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslSpanConfProfileEntry 12 }
+
+hdsl2ShdslSpanConfUsedTargetMargins OBJECT-TYPE
+   SYNTAX      BITS
+               {
+               currCondDown(0),
+               worstCaseDown(1),
+               currCondUp(2),
+               worstCaseUp(3)
+               }
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "Indicates whether a target SNR margin is enabled or
+      disabled.  This is a bit-map of possible settings.  The
+      various bit positions are as follows:
+
+      currCondDown   - current-condition downstream target SNR
+                       margin enabled
+
+      worstCaseDown  - worst-case downstream target SNR margin
+                       enabled
+
+      currCondUp     - current-condition upstream target SNR
+                       margin enabled
+
+      worstCaseUp    - worst-case upstream target SNR margin
+                       enabled."
+   DEFVAL      { { currCondDown } }
+   ::= { hdsl2ShdslSpanConfProfileEntry 13 }
+
+hdsl2ShdslSpanConfReferenceClock OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslClockReferenceType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the clock reference for the STU-C
+      in an SHDSL Line."
+   DEFVAL      { localClk }
+   ::= { hdsl2ShdslSpanConfProfileEntry 14 }
+
+hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
+   SYNTAX      INTEGER
+               {
+               disable(1),
+               enable(2)
+               }
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object enables/disables support for Line Probe of
+      the units in an SHDSL line.  When Line Probe is enabled, the
+      system performs Line Probing to find the best possible
+      rate.  If Line Probe is disabled, the rate adaptation phase
+      is skipped to shorten set up time."
+   DEFVAL      { disable }
+   ::= { hdsl2ShdslSpanConfProfileEntry 15 }
+
+hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object controls creation/deletion of the associated
+      entry in this table per the semantics of RowStatus.  If an
+      active entry is referenced in hdsl2ShdslSpanConfProfile, the
+      entry MUST remain active until all references are removed."
+   ::= { hdsl2ShdslSpanConfProfileEntry 16 }
+
+-- Segment Endpoint Alarm Configuration Profile group
+--
+
+hdsl2ShdslEndpointAlarmConfProfileTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Hdsl2ShdslEndpointAlarmConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table supports definitions of alarm configuration
+      profiles for HDSL2/SHDSL segment endpoints.  This table
+      MUST be maintained in a persistent manner."
+   ::= { hdsl2ShdslMibObjects 11 }
+
+hdsl2ShdslEndpointAlarmConfProfileEntry OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslEndpointAlarmConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "Each entry corresponds to a single alarm configuration profile.
+      Each profile contains a set of parameters for setting alarm
+      thresholds for various performance attributes monitored at
+      HDSL2/SHDSL segment endpoints.  Profiles may be created/deleted
+      using the row creation/deletion mechanism via
+      hdsl2ShdslEndpointAlarmConfProfileRowStatus.  If an active
+      entry is referenced in either hdsl2ShdslSpanConfAlarmProfile
+      or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
+      active until all references are removed."
+   INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 }
+
+Hdsl2ShdslEndpointAlarmConfProfileEntry ::=
+   SEQUENCE
+   {
+   hdsl2ShdslEndpointAlarmConfProfileName       SnmpAdminString,
+   hdsl2ShdslEndpointThreshLoopAttenuation      Integer32,
+   hdsl2ShdslEndpointThreshSNRMargin            Integer32,
+   hdsl2ShdslEndpointThreshES
+                                Hdsl2ShdslPerfIntervalThreshold,
+   hdsl2ShdslEndpointThreshSES
+                                Hdsl2ShdslPerfIntervalThreshold,
+   hdsl2ShdslEndpointThreshCRCanomalies         Integer32,
+   hdsl2ShdslEndpointThreshLOSWS
+                                Hdsl2ShdslPerfIntervalThreshold,
+   hdsl2ShdslEndpointThreshUAS
+                                Hdsl2ShdslPerfIntervalThreshold,
+   hdsl2ShdslEndpointAlarmConfProfileRowStatus  RowStatus
+   }
+
+hdsl2ShdslEndpointAlarmConfProfileName OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is the unique index associated with this profile."
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 1 }
+
+hdsl2ShdslEndpointThreshLoopAttenuation OBJECT-TYPE
+   SYNTAX      Integer32(-127..128)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the loop attenuation alarm threshold.
+      When the current value of hdsl2ShdslEndpointCurrAtn reaches
+      or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing
+      MAY be generated."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 2 }
+
+hdsl2ShdslEndpointThreshSNRMargin OBJECT-TYPE
+   SYNTAX      Integer32(-127..128)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the SNR margin alarm threshold.
+      When the current value of hdsl2ShdslEndpointCurrSnrMgn
+      reaches or drops below this threshold, a
+      hdsl2ShdslSNRMarginCrossing MAY be generated."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 3 }
+
+hdsl2ShdslEndpointThreshES OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the threshold for the number of
+      Errored Seconds (ES) within any given 15-minute performance
+      data collection interval.  If the value of Errored Seconds
+      in a particular 15-minute collection interval reaches/
+      exceeds this value, an hdsl2ShdslPerfESThresh MAY be
+      generated.  At most, one notification will be sent per
+      interval per endpoint."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 4 }
+
+hdsl2ShdslEndpointThreshSES OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the threshold for the number of
+      Severely Errored Seconds (SES) within any given 15-minute
+      performance data collection interval.  If the value of
+      Severely Errored Seconds in a particular 15-minute collection
+      interval reaches/exceeds this value, an hdsl2ShdslPerfSESThresh
+      MAY be generated.  At most, one notification will be sent per
+      interval per endpoint."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 5 }
+
+hdsl2ShdslEndpointThreshCRCanomalies OBJECT-TYPE
+   SYNTAX      Integer32
+   UNITS       "detected CRC Anomalies"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the threshold for the number of
+      CRC anomalies within any given 15-minute performance data
+      collection interval.  If the value of CRC anomalies in a
+      particular 15-minute collection interval reaches/exceeds
+      this value, an hdsl2ShdslPerfCRCanomaliesThresh MAY be
+      generated.  At most, one notification will be sent per
+      interval per endpoint."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 6 }
+
+hdsl2ShdslEndpointThreshLOSWS OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the threshold for the number of
+      Loss of Sync Word (LOSW) Seconds within any given 15-minute
+      performance data collection interval.  If the value of LOSW
+      in a particular 15-minute collection interval reaches/exceeds
+      this value, an hdsl2ShdslPerfLOSWSThresh MAY be generated.
+      At most, one notification will be sent per interval per
+      endpoint."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 7 }
+
+hdsl2ShdslEndpointThreshUAS OBJECT-TYPE
+   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object configures the threshold for the number of
+      Unavailable Seconds (UAS) within any given 15-minute
+      performance data collection interval.  If the value of UAS
+      in a particular 15-minute collection interval reaches/exceeds
+      this value, an hdsl2ShdslPerfUASThresh MAY be generated.
+      At most, one notification will be sent per interval per
+      endpoint."
+   DEFVAL      { 0 }
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 8 }
+
+hdsl2ShdslEndpointAlarmConfProfileRowStatus OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object controls creation/deletion of the associated
+      entry in this table as per the semantics of RowStatus.
+      If an active entry is referenced in either
+      hdsl2ShdslSpanConfAlarmProfile or
+      hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
+      active until all references are removed."
+   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 9 }
+
+-- Notifications Group
+--
+
+hdsl2ShdslNotifications OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 0 }
+
+hdsl2ShdslLoopAttenCrossing NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrAtn,
+   hdsl2ShdslEndpointThreshLoopAttenuation
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the loop attenuation
+      threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation
+      value) has been reached/exceeded for the HDSL2/SHDSL segment
+      endpoint."
+   ::= { hdsl2ShdslNotifications 1 }
+
+hdsl2ShdslSNRMarginCrossing NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrSnrMgn,
+   hdsl2ShdslEndpointThreshSNRMargin
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the SNR margin threshold (as
+      per the hdsl2ShdslEndpointThreshSNRMargin value) has been
+      reached/exceeded for the HDSL2/SHDSL segment endpoint."
+   ::= { hdsl2ShdslNotifications 2 }
+
+hdsl2ShdslPerfESThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurr15MinES,
+   hdsl2ShdslEndpointThreshES
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the errored seconds
+      threshold (as per the hdsl2ShdslEndpointThreshES value)
+      has been reached/exceeded for the HDSL2/SHDSL segment
+      endpoint."
+   ::= { hdsl2ShdslNotifications 3 }
+
+hdsl2ShdslPerfSESThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurr15MinSES,
+   hdsl2ShdslEndpointThreshSES
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the severely errored seconds
+      threshold (as per the hdsl2ShdslEndpointThreshSES value) has
+      been reached/exceeded for the HDSL2/SHDSL segment endpoint."
+   ::= { hdsl2ShdslNotifications 4 }
+
+hdsl2ShdslPerfCRCanomaliesThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurr15MinCRCanomalies,
+   hdsl2ShdslEndpointThreshCRCanomalies
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the CRC anomalies threshold
+      (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has
+      been reached/exceeded for the HDSL2/SHDSL segment endpoint."
+   ::= { hdsl2ShdslNotifications 5 }
+
+hdsl2ShdslPerfLOSWSThresh NOTIFICATION-TYPE
+
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurr15MinLOSWS,
+   hdsl2ShdslEndpointThreshLOSWS
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the LOSW Seconds threshold
+      (as per the hdsl2ShdslEndpointThreshLOSWS value) has been
+      reached/exceeded for the HDSL2/SHDSL segment endpoint."
+   ::= { hdsl2ShdslNotifications 6 }
+
+hdsl2ShdslPerfUASThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurr15MinUAS,
+   hdsl2ShdslEndpointThreshUAS
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the unavailable seconds
+      threshold (as per the hdsl2ShdslEndpointThreshUAS value) has
+      been reached/exceeded for the HDSL2/SHDSL segment endpoint."
+   ::= { hdsl2ShdslNotifications 7 }
+
+hdsl2ShdslSpanInvalidNumRepeaters NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslSpanConfNumRepeaters
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that a mismatch has been detected
+      between the number of repeater/regenerator units configured
+      for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters
+      object and the actual number of repeater/regenerator units
+      discovered via the EOC."
+   ::= { hdsl2ShdslNotifications 8 }
+
+hdsl2ShdslLoopbackFailure NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslMaintLoopbackConfig
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that an endpoint maintenance
+      loopback command failed for an HDSL2/SHDSL segment."
+   ::= { hdsl2ShdslNotifications 9 }
+
+hdsl2ShdslpowerBackoff NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrStatus
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the bit setting for
+      powerBackoff in the hdsl2ShdslEndpointCurrStatus object for
+      this endpoint has changed."
+   ::= { hdsl2ShdslNotifications 10 }
+
+hdsl2ShdsldeviceFault NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrStatus
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the bit setting for
+      deviceFault in the hdsl2ShdslEndpointCurrStatus object for
+      this endpoint has changed."
+   ::= { hdsl2ShdslNotifications 11 }
+
+hdsl2ShdsldcContinuityFault NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrStatus
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the bit setting for
+      dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object
+      for this endpoint has changed."
+   ::= { hdsl2ShdslNotifications 12 }
+
+hdsl2ShdslconfigInitFailure NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrStatus
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the bit setting for
+      configInitFailure in the hdsl2ShdslEndpointCurrStatus object
+      for this endpoint has changed."
+   ::= { hdsl2ShdslNotifications 13 }
+
+hdsl2ShdslprotocolInitFailure NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrStatus
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the bit setting for
+      protocolInitFailure in the hdsl2ShdslEndpointCurrStatus
+      object for this endpoint has changed."
+   ::= { hdsl2ShdslNotifications 14 }
+
+hdsl2ShdslnoNeighborPresent NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrStatus
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates that the bit setting for
+      noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object
+      for this endpoint has changed."
+   ::= { hdsl2ShdslNotifications 15 }
+
+hdsl2ShdslLocalPowerLoss NOTIFICATION-TYPE
+   OBJECTS
+   {
+   hdsl2ShdslInvVendorID
+   }
+   STATUS    current
+   DESCRIPTION
+     "This notification indicates impending unit failure due to
+      loss of local power (last gasp)."
+   ::= { hdsl2ShdslNotifications 16 }
+
+-- conformance information
+--
+
+hdsl2ShdslConformance OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 3 }
+hdsl2ShdslGroups      OBJECT IDENTIFIER ::=
+             { hdsl2ShdslConformance 1 }
+hdsl2ShdslCompliances OBJECT IDENTIFIER ::=
+             { hdsl2ShdslConformance 2 }
+
+-- agent compliance statements
+
+hdsl2ShdslLineMibCompliance MODULE-COMPLIANCE
+   STATUS  deprecated
+   DESCRIPTION
+     "The compliance statement for SNMP entities that implement
+     HDSL2 and SHDSL.  The version of SHDSL supported in this
+     compliance statement is g.shdsl.
+
+     **** This compliance statement is deprecated. ****"
+   MODULE
+   MANDATORY-GROUPS
+   {
+   hdsl2ShdslSpanConfGroup,
+   hdsl2ShdslSpanStatusGroup,
+   hdsl2ShdslInventoryGroup,
+   hdsl2ShdslEndpointConfGroup,
+   hdsl2ShdslEndpointCurrGroup,
+   hdsl2Shdsl15MinIntervalGroup,
+   hdsl2Shdsl1DayIntervalGroup,
+   hdsl2ShdslMaintenanceGroup,
+   hdsl2ShdslEndpointAlarmConfGroup,
+   hdsl2ShdslNotificationGroup
+   }
+
+GROUP  hdsl2ShdslInventoryShdslGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+GROUP  hdsl2ShdslSpanShdslStatusGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+GROUP  hdsl2ShdslSpanConfProfileGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+OBJECT hdsl2ShdslSpanConfWireInterface
+   SYNTAX      INTEGER
+               {
+               twoWire(1),
+               fourWire(2)
+               }
+   DESCRIPTION
+     "An implementation only has to support the range as
+     applicable for the original g.shdsl specification defined
+     in RFC 3276."
+
+OBJECT hdsl2ShdslStatusMaxAttainableLineRate
+   SYNTAX      Unsigned32(0..4112000)
+   DESCRIPTION
+     "An implementation only has to support the range as
+     applicable for the original g.shdsl specification defined
+     in RFC 3276."
+
+OBJECT hdsl2ShdslStatusActualLineRate
+   SYNTAX      Unsigned32(0..4112000)
+   DESCRIPTION
+     "An implementation only has to support the range as
+     applicable for the original g.shdsl specification defined
+     in RFC 3276."
+
+OBJECT hdsl2ShdslSpanConfMinLineRate
+   SYNTAX      Unsigned32(0..4112000)
+   DESCRIPTION
+     "An implementation only has to support the range as
+     applicable for the original g.shdsl specification defined
+     in RFC 3276."
+
+OBJECT hdsl2ShdslSpanConfMaxLineRate
+   SYNTAX      Unsigned32(0..4112000)
+   DESCRIPTION
+     "An implementation only has to support the range as
+     applicable for the original g.shdsl specification defined
+     in RFC 3276."
+   ::= { hdsl2ShdslCompliances 1 }
+
+hdsl2GshdslbisLineMibCompliance MODULE-COMPLIANCE
+   STATUS  current
+   DESCRIPTION
+     "The compliance statement for SNMP entities that implement
+     HDSL2 and SHDSL.  The version of SHDSL supported in this
+     compliance statement is g.shdsl.bis."
+   MODULE
+   MANDATORY-GROUPS
+   {
+   hdsl2ShdslSpanConfGroup,
+   hdsl2ShdslSpanStatusGroup,
+   hdsl2ShdslInventoryGroup,
+   hdsl2ShdslEndpointConfGroup,
+   hdsl2ShdslEndpointCurrGroup,
+   hdsl2Shdsl15MinIntervalGroup,
+   hdsl2Shdsl1DayIntervalGroup,
+   hdsl2ShdslMaintenanceGroup,
+   hdsl2ShdslEndpointAlarmConfGroup,
+   hdsl2ShdslNotificationGroup
+   }
+
+GROUP  hdsl2ShdslInventoryShdslGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+GROUP  hdsl2ShdslSpanShdslStatusGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+GROUP  hdsl2ShdslSpanConfProfileGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+GROUP hdsl2ShdslWirePairGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+
+GROUP hdsl2ShdslPayloadRateGroup
+   DESCRIPTION
+     "Support for this group is only required for implementations
+     supporting SHDSL lines."
+   ::= { hdsl2ShdslCompliances 2 }
+
+-- units of conformance
+--
+
+hdsl2ShdslSpanConfGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslSpanConfNumRepeaters,
+   hdsl2ShdslSpanConfProfile,
+   hdsl2ShdslSpanConfAlarmProfile
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects for configuring span-related
+      parameters for HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 1 }
+
+hdsl2ShdslSpanStatusGroup OBJECT-GROUP
+   OBJECTS
+
+   {
+   hdsl2ShdslStatusNumAvailRepeaters
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects for retrieving span-related
+      status for HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 2 }
+
+hdsl2ShdslInventoryShdslGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslInvTransmissionModeCapability
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects for retrieving SHDSL-specific
+      inventory information."
+   ::= { hdsl2ShdslGroups 3 }
+
+hdsl2ShdslSpanShdslStatusGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslStatusMaxAttainableLineRate,
+   hdsl2ShdslStatusActualLineRate,
+   hdsl2ShdslStatusTransmissionModeCurrent
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects for retrieving SHDSL-specific
+      span-related status."
+   ::= { hdsl2ShdslGroups 4 }
+
+hdsl2ShdslInventoryGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslInvVendorID,
+   hdsl2ShdslInvVendorModelNumber,
+   hdsl2ShdslInvVendorSerialNumber,
+   hdsl2ShdslInvVendorEOCSoftwareVersion,
+   hdsl2ShdslInvStandardVersion,
+   hdsl2ShdslInvVendorListNumber,
+   hdsl2ShdslInvVendorIssueNumber,
+   hdsl2ShdslInvVendorSoftwareVersion,
+   hdsl2ShdslInvEquipmentCode,
+   hdsl2ShdslInvVendorOther
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that provide unit inventory
+      information about the units in HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 5 }
+
+hdsl2ShdslEndpointConfGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrAtn
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects for configuring parameters for
+      segment endpoints in HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 6 }
+
+hdsl2ShdslEndpointCurrGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrAtn,
+   hdsl2ShdslEndpointCurrSnrMgn,
+   hdsl2ShdslEndpointCurrStatus,
+   hdsl2ShdslEndpointES,
+   hdsl2ShdslEndpointSES,
+   hdsl2ShdslEndpointCRCanomalies,
+   hdsl2ShdslEndpointLOSWS,
+   hdsl2ShdslEndpointUAS,
+   hdsl2ShdslEndpointCurr15MinTimeElapsed,
+   hdsl2ShdslEndpointCurr15MinES,
+   hdsl2ShdslEndpointCurr15MinSES,
+   hdsl2ShdslEndpointCurr15MinCRCanomalies,
+   hdsl2ShdslEndpointCurr15MinLOSWS,
+   hdsl2ShdslEndpointCurr15MinUAS,
+   hdsl2ShdslEndpointCurr1DayTimeElapsed,
+   hdsl2ShdslEndpointCurr1DayES,
+   hdsl2ShdslEndpointCurr1DaySES,
+   hdsl2ShdslEndpointCurr1DayCRCanomalies,
+   hdsl2ShdslEndpointCurr1DayLOSWS,
+   hdsl2ShdslEndpointCurr1DayUAS
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that provide current status and
+      performance measurements relating to segment endpoints in
+      HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 7 }
+
+hdsl2Shdsl15MinIntervalGroup OBJECT-GROUP
+
+   OBJECTS
+   {
+   hdsl2Shdsl15MinIntervalES,
+   hdsl2Shdsl15MinIntervalSES,
+   hdsl2Shdsl15MinIntervalCRCanomalies,
+   hdsl2Shdsl15MinIntervalLOSWS,
+   hdsl2Shdsl15MinIntervalUAS
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that maintain historic
+      performance measurements relating to segment endpoints in
+      HDSL2/SHDSL lines in 15-minute intervals."
+   ::= { hdsl2ShdslGroups 8 }
+
+hdsl2Shdsl1DayIntervalGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2Shdsl1DayIntervalMoniSecs,
+   hdsl2Shdsl1DayIntervalES,
+   hdsl2Shdsl1DayIntervalSES,
+   hdsl2Shdsl1DayIntervalCRCanomalies,
+   hdsl2Shdsl1DayIntervalLOSWS,
+   hdsl2Shdsl1DayIntervalUAS
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that maintain historic
+      performance measurements relating to segment endpoints in
+      HDSL2/SHDSL lines in 1-day intervals."
+   ::= { hdsl2ShdslGroups 9 }
+
+hdsl2ShdslMaintenanceGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslMaintLoopbackConfig,
+   hdsl2ShdslMaintTipRingReversal,
+   hdsl2ShdslMaintPowerBackOff,
+   hdsl2ShdslMaintSoftRestart,
+   hdsl2ShdslMaintLoopbackTimeout,
+   hdsl2ShdslMaintUnitPowerSource
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that provide support for
+      maintenance actions for HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 10 }
+
+hdsl2ShdslEndpointAlarmConfGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslEndpointAlarmConfProfile,
+   hdsl2ShdslEndpointThreshLoopAttenuation,
+   hdsl2ShdslEndpointThreshSNRMargin,
+   hdsl2ShdslEndpointThreshES,
+   hdsl2ShdslEndpointThreshSES,
+   hdsl2ShdslEndpointThreshCRCanomalies,
+   hdsl2ShdslEndpointThreshLOSWS,
+   hdsl2ShdslEndpointThreshUAS,
+   hdsl2ShdslEndpointAlarmConfProfileRowStatus
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that allow configuration of alarm
+      thresholds for various performance parameters for HDSL2/SHDSL
+      lines."
+   ::= { hdsl2ShdslGroups 11 }
+
+hdsl2ShdslNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS
+   {
+   hdsl2ShdslLoopAttenCrossing,
+   hdsl2ShdslSNRMarginCrossing,
+   hdsl2ShdslPerfESThresh,
+   hdsl2ShdslPerfSESThresh,
+   hdsl2ShdslPerfCRCanomaliesThresh,
+   hdsl2ShdslPerfLOSWSThresh,
+   hdsl2ShdslPerfUASThresh,
+   hdsl2ShdslSpanInvalidNumRepeaters,
+   hdsl2ShdslLoopbackFailure,
+   hdsl2ShdslpowerBackoff,
+   hdsl2ShdsldeviceFault,
+   hdsl2ShdsldcContinuityFault,
+   hdsl2ShdslconfigInitFailure,
+   hdsl2ShdslprotocolInitFailure,
+   hdsl2ShdslnoNeighborPresent,
+   hdsl2ShdslLocalPowerLoss
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports notifications of significant conditions
+      associated with HDSL2/SHDSL lines."
+   ::= { hdsl2ShdslGroups 12 }
+
+hdsl2ShdslSpanConfProfileGroup OBJECT-GROUP
+   OBJECTS
+
+   {
+   hdsl2ShdslSpanConfWireInterface,
+   hdsl2ShdslSpanConfMinLineRate,
+   hdsl2ShdslSpanConfMaxLineRate,
+   hdsl2ShdslSpanConfPSD,
+   hdsl2ShdslSpanConfTransmissionMode,
+   hdsl2ShdslSpanConfRemoteEnabled,
+   hdsl2ShdslSpanConfPowerFeeding,
+   hdsl2ShdslSpanConfCurrCondTargetMarginDown,
+   hdsl2ShdslSpanConfWorstCaseTargetMarginDown,
+   hdsl2ShdslSpanConfCurrCondTargetMarginUp,
+   hdsl2ShdslSpanConfWorstCaseTargetMarginUp,
+   hdsl2ShdslSpanConfUsedTargetMargins,
+   hdsl2ShdslSpanConfReferenceClock,
+   hdsl2ShdslSpanConfLineProbeEnable,
+   hdsl2ShdslSpanConfProfileRowStatus
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that constitute configuration
+      profiles for configuring span-related parameters in SHDSL
+      lines."
+   ::= { hdsl2ShdslGroups 13 }
+
+hdsl2ShdslWirePairGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslEndpointCurrTipRingReversal,
+   hdsl2ShdslEndpointCurrActivationState
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects that provide the status
+      of SHDSL-specific wire pairs."
+   ::= { hdsl2ShdslGroups 14 }
+
+hdsl2ShdslPayloadRateGroup OBJECT-GROUP
+   OBJECTS
+   {
+   hdsl2ShdslStatusMaxAttainablePayloadRate,
+   hdsl2ShdslStatusActualPayloadRate
+   }
+   STATUS      current
+   DESCRIPTION
+     "This group supports objects for retrieving payload rates
+      that exclude any framing overhead."
+   ::= { hdsl2ShdslGroups 15 }
+
+END
diff --git a/snmp_builder/mibs/HOST-RESOURCES-MIB.mib b/snmp_builder/mibs/HOST-RESOURCES-MIB.mib
new file mode 100644
index 0000000..373b9b3
--- /dev/null
+++ b/snmp_builder/mibs/HOST-RESOURCES-MIB.mib
@@ -0,0 +1,1540 @@
+HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+Integer32, Counter32, Gauge32, TimeTicks  FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION, DisplayString,
+TruthValue, DateAndTime, AutonomousType   FROM SNMPv2-TC
+
+MODULE-COMPLIANCE, OBJECT-GROUP           FROM SNMPv2-CONF
+
+InterfaceIndexOrZero                      FROM IF-MIB;
+
+hostResourcesMibModule MODULE-IDENTITY
+   LAST-UPDATED "200003060000Z"    -- 6 March 2000
+   ORGANIZATION "IETF Host Resources MIB Working Group"
+   CONTACT-INFO
+       "Steve Waldbusser
+       Postal: Lucent Technologies, Inc.
+               1213 Innsbruck Dr.
+               Sunnyvale, CA 94089
+               USA
+       Phone:  650-318-1251
+       Fax:    650-318-1633
+       Email:  waldbusser@lucent.com
+
+       In addition, the Host Resources MIB mailing list is
+       dedicated to discussion of this MIB. To join the
+       mailing list, send a request message to
+       hostmib-request@andrew.cmu.edu. The mailing list
+       address is hostmib@andrew.cmu.edu."
+   DESCRIPTION
+       "This MIB is for use in managing host systems. The term
+       `host' is construed to mean any computer that communicates
+       with other similar computers attached to the internet and
+       that is directly used by one or more human beings. Although
+       this MIB does not necessarily apply to devices whose primary
+       function is communications services (e.g., terminal servers,
+       routers, bridges, monitoring equipment), such relevance is
+       not explicitly precluded.  This MIB instruments attributes
+       common to all internet hosts including, for example, both
+       personal computers and systems that run variants of Unix."
+
+   REVISION "200003060000Z"        -- 6 March 2000
+   DESCRIPTION
+       "Clarifications and bug fixes based on implementation
+       experience.  This revision was also reformatted in the SMIv2
+       format. The revisions made were:
+
+       New RFC document standards:
+          Added Copyright notice, updated introduction to SNMP
+          Framework, updated references section, added reference to
+          RFC 2119, and added a meaningful Security Considerations
+          section.
+
+       New IANA considerations section for registration of new types
+
+       Conversion to new SMIv2 syntax for the following types and
+       macros:
+           Counter32, Integer32, Gauge32, MODULE-IDENTITY,
+           OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY,
+           MODULE-COMPLIANCE, OBJECT-GROUP
+
+       Used new Textual Conventions:
+           TruthValue, DateAndTime, AutonomousType,
+           InterfaceIndexOrZero
+
+       Fixed typo in hrPrinterStatus.
+
+       Added missing error bits to hrPrinterDetectedErrorState and
+       clarified confusion resulting from suggested mappings to
+       hrPrinterStatus.
+
+       Clarified that size of objects of type
+       InternationalDisplayString is number of octets, not number
+       of encoded symbols.
+
+       Clarified the use of the following objects based on
+       implementation experience:
+           hrSystemInitialLoadDevice, hrSystemInitialLoadParameters,
+           hrMemorySize, hrStorageSize, hrStorageAllocationFailures,
+           hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex,
+           hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU,
+           and hrSWInstalledDate.
+
+       Clarified implementation technique for hrSWInstalledTable.
+
+       Used new AUGMENTS clause for hrSWRunPerfTable.
+
+       Added Internationalization Considerations section.
+
+This revision published as RFC2790."
+
+   REVISION "9910202200Z"    -- 20 October, 1999
+   DESCRIPTION
+       "The original version of this MIB, published as
+       RFC1514."
+   ::= { hrMIBAdminInfo 1 }
+
+host     OBJECT IDENTIFIER ::= { mib-2 25 }
+
+hrSystem        OBJECT IDENTIFIER ::= { host 1 }
+hrStorage       OBJECT IDENTIFIER ::= { host 2 }
+hrDevice        OBJECT IDENTIFIER ::= { host 3 }
+hrSWRun         OBJECT IDENTIFIER ::= { host 4 }
+hrSWRunPerf     OBJECT IDENTIFIER ::= { host 5 }
+hrSWInstalled   OBJECT IDENTIFIER ::= { host 6 }
+hrMIBAdminInfo  OBJECT IDENTIFIER ::= { host 7 }
+
+-- textual conventions
+
+KBytes ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "Storage size, expressed in units of 1024 bytes."
+    SYNTAX Integer32 (0..2147483647)
+
+ProductID ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This textual convention is intended to identify the
+
+        manufacturer, model, and version of a specific
+        hardware or software product.  It is suggested that
+        these OBJECT IDENTIFIERs are allocated such that all
+        products from a particular manufacturer are registered
+        under a subtree distinct to that manufacturer.  In
+        addition, all versions of a product should be
+        registered under a subtree distinct to that product.
+        With this strategy, a management station may uniquely
+        determine the manufacturer and/or model of a product
+        whose productID is unknown to the management station.
+        Objects of this type may be useful for inventory
+        purposes or for automatically detecting
+        incompatibilities or version mismatches between
+        various hardware and software components on a system.
+
+        For example, the product ID for the ACME 4860 66MHz
+        clock doubled processor might be:
+        enterprises.acme.acmeProcessors.a4860DX2.MHz66
+
+        A software product might be registered as:
+        enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1)
+        "
+    SYNTAX OBJECT IDENTIFIER
+
+-- unknownProduct will be used for any unknown ProductID
+-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 }
+
+InternationalDisplayString ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This data type is used to model textual information
+        in some character set.  A network management station
+        should use a local algorithm to determine which
+        character set is in use and how it should be
+        displayed.  Note that this character set may be
+        encoded with more than one octet per symbol, but will
+        most often be NVT ASCII. When a size clause is
+        specified for an object of this type, the size refers
+        to the length in octets, not the number of symbols."
+    SYNTAX OCTET STRING
+
+-- The Host Resources System Group
+
+hrSystemUptime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of time since this host was last
+        initialized.  Note that this is different from
+        sysUpTime in the SNMPv2-MIB [RFC1907] because
+        sysUpTime is the uptime of the network management
+        portion of the system."
+    ::= { hrSystem 1 }
+
+hrSystemDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The host's notion of the local date and time of day."
+    ::= { hrSystem 2 }
+
+hrSystemInitialLoadDevice OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The index of the hrDeviceEntry for the device from
+        which this host is configured to load its initial
+        operating system configuration (i.e., which operating
+        system code and/or boot parameters).
+
+        Note that writing to this object just changes the
+        configuration that will be used the next time the
+        operating system is loaded and does not actually cause
+        the reload to occur."
+    ::= { hrSystem 3 }
+
+hrSystemInitialLoadParameters OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..128))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object contains the parameters (e.g. a pathname
+        and parameter) supplied to the load device when
+        requesting the initial operating system configuration
+        from that device.
+
+     Note that writing to this object just changes the
+     configuration that will be used the next time the
+     operating system is loaded and does not actually cause
+     the reload to occur."
+    ::= { hrSystem 4 }
+
+hrSystemNumUsers OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of user sessions for which this host is
+        storing state information.  A session is a collection
+        of processes requiring a single act of user
+        authentication and possibly subject to collective job
+        control."
+    ::= { hrSystem 5 }
+
+hrSystemProcesses OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of process contexts currently loaded or
+        running on this system."
+    ::= { hrSystem 6 }
+
+hrSystemMaxProcesses OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of process contexts this system
+        can support.  If there is no fixed maximum, the value
+        should be zero.  On systems that have a fixed maximum,
+        this object can help diagnose failures that occur when
+        this maximum is reached."
+    ::= { hrSystem 7 }
+
+-- The Host Resources Storage Group
+
+-- Registration point for storage types, for use with hrStorageType.
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrStorageTypes          OBJECT IDENTIFIER ::= { hrStorage 1 }
+
+hrMemorySize OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of physical read-write main memory,
+        typically RAM, contained by the host."
+    ::= { hrStorage 2 }
+
+hrStorageTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of logical storage areas on
+        the host.
+
+        An entry shall be placed in the storage table for each
+        logical area of storage that is allocated and has
+        fixed resource limits.  The amount of storage
+        represented in an entity is the amount actually usable
+        by the requesting entity, and excludes loss due to
+        formatting or file system reference information.
+
+        These entries are associated with logical storage
+        areas, as might be seen by an application, rather than
+        physical storage entities which are typically seen by
+        an operating system.  Storage such as tapes and
+        floppies without file systems on them are typically
+        not allocated in chunks by the operating system to
+        requesting applications, and therefore shouldn't
+        appear in this table.  Examples of valid storage for
+        this table include disk partitions, file systems, ram
+        (for some architectures this is further segmented into
+        regular memory, extended memory, and so on), backing
+        store for virtual memory (`swap space').
+
+        This table is intended to be a useful diagnostic for
+        `out of memory' and `out of buffers' types of
+        failures.  In addition, it can be a useful performance
+        monitoring tool for tracking memory, disk, or buffer
+        usage."
+    ::= { hrStorage 3 }
+
+hrStorageEntry OBJECT-TYPE
+    SYNTAX     HrStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one logical storage area on
+        the host.  As an example, an instance of the
+        hrStorageType object might be named hrStorageType.3"
+    INDEX { hrStorageIndex }
+    ::= { hrStorageTable 1 }
+
+HrStorageEntry ::= SEQUENCE {
+        hrStorageIndex               Integer32,
+        hrStorageType                AutonomousType,
+        hrStorageDescr               DisplayString,
+        hrStorageAllocationUnits     Integer32,
+        hrStorageSize                Integer32,
+        hrStorageUsed                Integer32,
+        hrStorageAllocationFailures  Counter32
+    }
+
+hrStorageIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each logical storage area
+        contained by the host."
+    ::= { hrStorageEntry 1 }
+
+hrStorageType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of storage represented by this entry."
+    ::= { hrStorageEntry 2 }
+
+hrStorageDescr OBJECT-TYPE
+    SYNTAX     DisplayString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the type and instance of the storage
+        described by this entry."
+    ::= { hrStorageEntry 3 }
+
+hrStorageAllocationUnits OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    UNITS      "Bytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The size, in bytes, of the data objects allocated
+        from this pool.  If this entry is monitoring sectors,
+        blocks, buffers, or packets, for example, this number
+        will commonly be greater than one.  Otherwise this
+        number will typically be one."
+    ::= { hrStorageEntry 4 }
+
+hrStorageSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The size of the storage represented by this entry, in
+        units of hrStorageAllocationUnits. This object is
+        writable to allow remote configuration of the size of
+        the storage area in those cases where such an
+        operation makes sense and is possible on the
+        underlying system. For example, the amount of main
+        memory allocated to a buffer pool might be modified or
+        the amount of disk space allocated to virtual memory
+        might be modified."
+    ::= { hrStorageEntry 5 }
+
+hrStorageUsed OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of the storage represented by this entry
+        that is allocated, in units of
+        hrStorageAllocationUnits."
+    ::= { hrStorageEntry 6 }
+
+hrStorageAllocationFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of requests for storage represented by
+        this entry that could not be honored due to not enough
+        storage.  It should be noted that as this object has a
+        SYNTAX of Counter32, that it does not have a defined
+        initial value.  However, it is recommended that this
+        object be initialized to zero, even though management
+        stations must not depend on such an initialization."
+    ::= { hrStorageEntry 7 }
+
+-- The Host Resources Device Group
+--
+-- The device group is useful for identifying and diagnosing the
+-- devices on a system.  The hrDeviceTable contains common
+-- information for any type of device.  In addition, some devices
+-- have device-specific tables for more detailed information.  More
+-- such tables may be defined in the future for other device types.
+
+-- Registration point for device types, for use with hrDeviceType.
+
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrDeviceTypes             OBJECT IDENTIFIER ::= { hrDevice 1 }
+
+hrDeviceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of devices contained by the
+        host."
+    ::= { hrDevice 2 }
+
+hrDeviceEntry OBJECT-TYPE
+    SYNTAX     HrDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one device contained by the
+        host.  As an example, an instance of the hrDeviceType
+        object might be named hrDeviceType.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrDeviceTable 1 }
+
+HrDeviceEntry ::= SEQUENCE {
+        hrDeviceIndex           Integer32,
+        hrDeviceType            AutonomousType,
+        hrDeviceDescr           DisplayString,
+        hrDeviceID              ProductID,
+        hrDeviceStatus          INTEGER,
+        hrDeviceErrors          Counter32
+    }
+
+hrDeviceIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each device contained by the host.
+        The value for each device must remain constant at
+        least from one re-initialization of the agent to the
+        next re-initialization."
+    ::= { hrDeviceEntry 1 }
+
+hrDeviceType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication of the type of device.
+
+        If this value is
+        `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
+        exists in the hrProcessorTable which corresponds to
+        this device.
+
+        If this value is
+        `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
+        exists in the hrNetworkTable which corresponds to this
+        device.
+
+        If this value is
+        `hrDevicePrinter { hrDeviceTypes 5 }', then an entry
+        exists in the hrPrinterTable which corresponds to this
+        device.
+
+        If this value is
+        `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
+        entry exists in the hrDiskStorageTable which
+        corresponds to this device."
+    ::= { hrDeviceEntry 2 }
+
+hrDeviceDescr OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this device, including the
+        device's manufacturer and revision, and optionally,
+        its serial number."
+    ::= { hrDeviceEntry 3 }
+
+hrDeviceID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID for this device."
+    ::= { hrDeviceEntry 4 }
+
+hrDeviceStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   running(2),
+                   warning(3),
+                   testing(4),
+                   down(5)
+
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current operational state of the device described
+        by this row of the table.  A value unknown(1)
+        indicates that the current state of the device is
+        unknown.  running(2) indicates that the device is up
+        and running and that no unusual error conditions are
+        known.  The warning(3) state indicates that agent has
+        been informed of an unusual error condition by the
+        operational software (e.g., a disk device driver) but
+        that the device is still 'operational'.  An example
+        would be a high number of soft errors on a disk.  A
+        value of testing(4), indicates that the device is not
+        available for use because it is in the testing state.
+        The state of down(5) is used only when the agent has
+        been informed that the device is not available for any
+        use."
+    ::= { hrDeviceEntry 5 }
+
+hrDeviceErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of errors detected on this device.  It
+        should be noted that as this object has a SYNTAX of
+        Counter32, that it does not have a defined initial
+        value.  However, it is recommended that this object be
+        initialized to zero, even though management stations
+        must not depend on such an initialization."
+    ::= { hrDeviceEntry 6 }
+
+hrProcessorTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrProcessorEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of processors contained by the
+        host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceProcessor'."
+    ::= { hrDevice 3 }
+
+hrProcessorEntry OBJECT-TYPE
+    SYNTAX     HrProcessorEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one processor contained by
+        the host.  The hrDeviceIndex in the index represents
+        the entry in the hrDeviceTable that corresponds to the
+        hrProcessorEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrProcessorFrwID object might be
+        named hrProcessorFrwID.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrProcessorTable 1 }
+
+HrProcessorEntry ::= SEQUENCE {
+        hrProcessorFrwID            ProductID,
+        hrProcessorLoad             Integer32
+    }
+
+hrProcessorFrwID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of the firmware associated with the
+        processor."
+    ::= { hrProcessorEntry 1 }
+
+hrProcessorLoad OBJECT-TYPE
+    SYNTAX     Integer32 (0..100)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The average, over the last minute, of the percentage
+        of time that this processor was not idle.
+        Implementations may approximate this one minute
+        smoothing period if necessary."
+    ::= { hrProcessorEntry 2 }
+
+hrNetworkTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrNetworkEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of network devices contained
+        by the host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceNetwork'."
+    ::= { hrDevice 4 }
+
+hrNetworkEntry OBJECT-TYPE
+    SYNTAX     HrNetworkEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one network device contained
+        by the host.  The hrDeviceIndex in the index
+        represents the entry in the hrDeviceTable that
+        corresponds to the hrNetworkEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrNetworkIfIndex object might be
+        named hrNetworkIfIndex.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrNetworkTable 1 }
+
+HrNetworkEntry ::= SEQUENCE {
+        hrNetworkIfIndex    InterfaceIndexOrZero
+    }
+
+hrNetworkIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of ifIndex which corresponds to this
+        network device. If this device is not represented in
+        the ifTable, then this value shall be zero."
+    ::= { hrNetworkEntry 1 }
+
+hrPrinterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrPrinterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of printers local to the host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDevicePrinter'."
+    ::= { hrDevice 5 }
+
+hrPrinterEntry OBJECT-TYPE
+    SYNTAX     HrPrinterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one printer local to the
+        host.  The hrDeviceIndex in the index represents the
+        entry in the hrDeviceTable that corresponds to the
+        hrPrinterEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrPrinterStatus object might be
+        named hrPrinterStatus.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrPrinterTable 1 }
+
+HrPrinterEntry ::= SEQUENCE {
+        hrPrinterStatus             INTEGER,
+        hrPrinterDetectedErrorState OCTET STRING
+    }
+
+hrPrinterStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   unknown(2),
+                   idle(3),
+                   printing(4),
+                   warmup(5)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of this printer device."
+    ::= { hrPrinterEntry 1 }
+
+hrPrinterDetectedErrorState OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This object represents any error conditions detected
+        by the printer.  The error conditions are encoded as
+        bits in an octet string, with the following
+        definitions:
+
+             Condition         Bit #
+
+             lowPaper              0
+
+             noPaper               1
+             lowToner              2
+             noToner               3
+             doorOpen              4
+             jammed                5
+             offline               6
+             serviceRequested      7
+             inputTrayMissing      8
+             outputTrayMissing     9
+             markerSupplyMissing  10
+             outputNearFull       11
+             outputFull           12
+             inputTrayEmpty       13
+             overduePreventMaint  14
+
+        Bits are numbered starting with the most significant
+        bit of the first byte being bit 0, the least
+        significant bit of the first byte being bit 7, the
+        most significant bit of the second byte being bit 8,
+        and so on.  A one bit encodes that the condition was
+        detected, while a zero bit encodes that the condition
+        was not detected.
+
+        This object is useful for alerting an operator to
+        specific warning or error conditions that may occur,
+        especially those requiring human intervention."
+    ::= { hrPrinterEntry 2 }
+
+hrDiskStorageTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrDiskStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of long-term storage devices
+        contained by the host.  In particular, disk devices
+        accessed remotely over a network are not included
+        here.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceDiskStorage'."
+    ::= { hrDevice 6 }
+
+hrDiskStorageEntry OBJECT-TYPE
+    SYNTAX     HrDiskStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one long-term storage device
+        contained by the host.  The hrDeviceIndex in the index
+        represents the entry in the hrDeviceTable that
+        corresponds to the hrDiskStorageEntry. As an example,
+        an instance of the hrDiskStorageCapacity object might
+        be named hrDiskStorageCapacity.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrDiskStorageTable 1 }
+
+HrDiskStorageEntry ::= SEQUENCE {
+        hrDiskStorageAccess         INTEGER,
+        hrDiskStorageMedia          INTEGER,
+        hrDiskStorageRemoveble      TruthValue,
+        hrDiskStorageCapacity       KBytes
+    }
+
+hrDiskStorageAccess OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   readWrite(1),
+                   readOnly(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication if this long-term storage device is
+        readable and writable or only readable.  This should
+        reflect the media type, any write-protect mechanism,
+        and any device configuration that affects the entire
+        device."
+    ::= { hrDiskStorageEntry 1 }
+
+hrDiskStorageMedia OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   unknown(2),
+                   hardDisk(3),
+                   floppyDisk(4),
+                   opticalDiskROM(5),
+                   opticalDiskWORM(6),     -- Write Once Read Many
+                   opticalDiskRW(7),
+                   ramDisk(8)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication of the type of media used in this long-
+        term storage device."
+    ::= { hrDiskStorageEntry 2 }
+
+hrDiskStorageRemoveble OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Denotes whether or not the disk media may be removed
+        from the drive."
+    ::= { hrDiskStorageEntry 3 }
+
+hrDiskStorageCapacity OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total size for this long-term storage device. If
+        the media is removable and is currently removed, this
+        value should be zero."
+    ::= { hrDiskStorageEntry 4 }
+
+hrPartitionTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrPartitionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of partitions for long-term
+        storage devices contained by the host.  In particular,
+        partitions accessed remotely over a network are not
+        included here."
+    ::= { hrDevice 7 }
+
+hrPartitionEntry OBJECT-TYPE
+    SYNTAX     HrPartitionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one partition.  The
+        hrDeviceIndex in the index represents the entry in the
+        hrDeviceTable that corresponds to the
+        hrPartitionEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrPartitionSize object might be
+        named hrPartitionSize.3.1"
+    INDEX { hrDeviceIndex, hrPartitionIndex }
+    ::= { hrPartitionTable 1 }
+
+HrPartitionEntry ::= SEQUENCE {
+        hrPartitionIndex                Integer32,
+        hrPartitionLabel                InternationalDisplayString,
+        hrPartitionID                   OCTET STRING,
+        hrPartitionSize                 KBytes,
+        hrPartitionFSIndex              Integer32
+    }
+
+hrPartitionIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each partition on this long-term
+        storage device.  The value for each long-term storage
+        device must remain constant at least from one re-
+        initialization of the agent to the next re-
+        initialization."
+    ::= { hrPartitionEntry 1 }
+
+hrPartitionLabel OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this partition."
+    ::= { hrPartitionEntry 2 }
+
+hrPartitionID OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A descriptor which uniquely represents this partition
+        to the responsible operating system.  On some systems,
+        this might take on a binary representation."
+    ::= { hrPartitionEntry 3 }
+
+hrPartitionSize OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The size of this partition."
+    ::= { hrPartitionEntry 4 }
+
+hrPartitionFSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the file system mounted on this
+        partition.  If no file system is mounted on this
+        partition, then this value shall be zero.  Note that
+        multiple partitions may point to one file system,
+        denoting that that file system resides on those
+        partitions.  Multiple file systems may not reside on
+        one partition."
+    ::= { hrPartitionEntry 5 }
+
+-- The File System Table
+
+-- Registration point for popular File System types,
+-- for use with hrFSType. These are defined in the
+-- HOST-RESOURCES-TYPES module.
+hrFSTypes               OBJECT IDENTIFIER ::= { hrDevice 9 }
+
+hrFSTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrFSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of file systems local to this
+        host or remotely mounted from a file server.  File
+        systems that are in only one user's environment on a
+        multi-user system will not be included in this table."
+    ::= { hrDevice 8 }
+
+hrFSEntry OBJECT-TYPE
+    SYNTAX     HrFSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one file system local to
+        this host or remotely mounted from a file server.
+        File systems that are in only one user's environment
+        on a multi-user system will not be included in this
+        table.
+
+        As an example of how objects in this table are named,
+        an instance of the hrFSMountPoint object might be
+        named hrFSMountPoint.3"
+    INDEX { hrFSIndex }
+    ::= { hrFSTable 1 }
+
+HrFSEntry ::= SEQUENCE {
+        hrFSIndex                   Integer32,
+        hrFSMountPoint              InternationalDisplayString,
+        hrFSRemoteMountPoint        InternationalDisplayString,
+        hrFSType                    AutonomousType,
+        hrFSAccess                  INTEGER,
+        hrFSBootable                TruthValue,
+        hrFSStorageIndex            Integer32,
+        hrFSLastFullBackupDate      DateAndTime,
+        hrFSLastPartialBackupDate   DateAndTime
+    }
+
+hrFSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each file system local to this
+        host.  The value for each file system must remain
+        constant at least from one re-initialization of the
+        agent to the next re-initialization."
+    ::= { hrFSEntry 1 }
+
+hrFSMountPoint OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The path name of the root of this file system."
+    ::= { hrFSEntry 2 }
+
+hrFSRemoteMountPoint OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the name and/or address of the
+        server that this file system is mounted from.  This
+        may also include parameters such as the mount point on
+        the remote file system.  If this is not a remote file
+        system, this string should have a length of zero."
+    ::= { hrFSEntry 3 }
+
+hrFSType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of this object identifies the type of this
+        file system."
+    ::= { hrFSEntry 4 }
+
+hrFSAccess OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   readWrite(1),
+                   readOnly(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication if this file system is logically
+        configured by the operating system to be readable and
+        writable or only readable.  This does not represent
+        any local access-control policy, except one that is
+        applied to the file system as a whole."
+    ::= { hrFSEntry 5 }
+
+hrFSBootable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A flag indicating whether this file system is
+        bootable."
+    ::= { hrFSEntry 6 }
+
+hrFSStorageIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the hrStorageEntry that represents
+        information about this file system.  If there is no
+        such information available, then this value shall be
+        zero.  The relevant storage entry will be useful in
+        tracking the percent usage of this file system and
+        diagnosing errors that may occur when it runs out of
+        space."
+    ::= { hrFSEntry 7 }
+
+hrFSLastFullBackupDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The last date at which this complete file system was
+
+        copied to another storage device for backup.  This
+        information is useful for ensuring that backups are
+        being performed regularly.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrFSEntry 8 }
+
+hrFSLastPartialBackupDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The last date at which a portion of this file system
+        was copied to another storage device for backup.  This
+        information is useful for ensuring that backups are
+        being performed regularly.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrFSEntry 9 }
+
+-- The Host Resources Running Software Group
+--
+-- The hrSWRunTable contains an entry for each distinct piece of
+-- software that is running or loaded into physical or virtual
+-- memory in preparation for running.  This includes the host's
+-- operating system, device drivers, and applications.
+
+hrSWOSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of the hrSWRunIndex for the hrSWRunEntry
+        that represents the primary operating system running
+        on this host.  This object is useful for quickly and
+        uniquely identifying that primary operating system."
+    ::= { hrSWRun 1 }
+
+hrSWRunTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWRunEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of software running on the
+        host."
+    ::= { hrSWRun 2 }
+
+hrSWRunEntry OBJECT-TYPE
+    SYNTAX     HrSWRunEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one piece of software
+        running on the host Note that because the installed
+        software table only contains information for software
+        stored locally on this host, not every piece of
+        running software will be found in the installed
+        software table.  This is true of software that was
+        loaded and run from a non-local source, such as a
+        network-mounted file system.
+
+        As an example of how objects in this table are named,
+        an instance of the hrSWRunName object might be named
+        hrSWRunName.1287"
+    INDEX { hrSWRunIndex }
+    ::= { hrSWRunTable 1 }
+
+HrSWRunEntry ::= SEQUENCE {
+        hrSWRunIndex       Integer32,
+        hrSWRunName        InternationalDisplayString,
+        hrSWRunID          ProductID,
+        hrSWRunPath        InternationalDisplayString,
+        hrSWRunParameters  InternationalDisplayString,
+        hrSWRunType        INTEGER,
+        hrSWRunStatus      INTEGER
+    }
+
+hrSWRunIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each piece of software running on
+        the host.  Wherever possible, this should be the
+        system's native, unique identification number."
+    ::= { hrSWRunEntry 1 }
+
+hrSWRunName OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this running piece of
+        software, including the manufacturer, revision,  and
+        the name by which it is commonly known.  If this
+        software was installed locally, this should be the
+        same string as used in the corresponding
+        hrSWInstalledName."
+    ::= { hrSWRunEntry 2 }
+
+hrSWRunID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of this running piece of software."
+    ::= { hrSWRunEntry 3 }
+
+hrSWRunPath OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the location on long-term storage
+        (e.g. a disk drive) from which this software was
+        loaded."
+    ::= { hrSWRunEntry 4 }
+
+hrSWRunParameters OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the parameters supplied to this
+        software when it was initially loaded."
+    ::= { hrSWRunEntry 5 }
+
+hrSWRunType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   operatingSystem(2),
+                   deviceDriver(3),
+                   application(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this software."
+    ::= { hrSWRunEntry 6 }
+
+hrSWRunStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   running(1),
+                   runnable(2),    -- waiting for resource
+                                   -- (i.e., CPU, memory, IO)
+                   notRunnable(3), -- loaded but waiting for event
+                   invalid(4)      -- not loaded
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The status of this running piece of software.
+        Setting this value to invalid(4) shall cause this
+        software to stop running and to be unloaded. Sets to
+        other values are not valid."
+    ::= { hrSWRunEntry 7 }
+
+-- The Host Resources Running Software Performance Group
+--
+-- The hrSWRunPerfTable contains an entry corresponding to
+-- each entry in the hrSWRunTable.
+
+hrSWRunPerfTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWRunPerfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of running software
+        performance metrics."
+    ::= { hrSWRunPerf 1 }
+
+hrSWRunPerfEntry OBJECT-TYPE
+    SYNTAX     HrSWRunPerfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry containing software performance
+        metrics.  As an example, an instance of the
+        hrSWRunPerfCPU object might be named
+        hrSWRunPerfCPU.1287"
+    AUGMENTS { hrSWRunEntry }  -- This table augments information in
+                               -- the hrSWRunTable.
+    ::= { hrSWRunPerfTable 1 }
+
+HrSWRunPerfEntry ::= SEQUENCE {
+        hrSWRunPerfCPU          Integer32,
+        hrSWRunPerfMem          KBytes
+}
+
+hrSWRunPerfCPU OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of centi-seconds of the total system's CPU
+        resources consumed by this process.  Note that on a
+        multi-processor system, this value may increment by
+        more than one centi-second in one centi-second of real
+        (wall clock) time."
+    ::= { hrSWRunPerfEntry 1 }
+
+hrSWRunPerfMem OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total amount of real system memory allocated to
+        this process."
+    ::= { hrSWRunPerfEntry 2 }
+
+-- The Host Resources Installed Software Group
+--
+-- The hrSWInstalledTable contains an entry for each piece
+-- of software installed in long-term storage (e.g. a disk
+-- drive) locally on this host.  Note that this does not
+-- include software loadable remotely from a network
+-- server.
+--
+-- Different implementations may track software in varying
+-- ways. For example, while some implementations may track
+-- executable files as distinct pieces of software, other
+-- implementations may use other strategies such as keeping
+-- track of software "packages" (e.g., related groups of files)
+-- or keeping track of system or application "patches".
+--
+-- This table is useful for identifying and inventorying
+-- software on a host and for diagnosing incompatibility
+-- and version mismatch problems between various pieces
+-- of hardware and software.
+
+hrSWInstalledLastChange OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when an entry in the
+        hrSWInstalledTable was last added, renamed, or
+        deleted.  Because this table is likely to contain many
+        entries, polling of this object allows a management
+        station to determine when re-downloading of the table
+        might be useful."
+    ::= { hrSWInstalled 1 }
+
+hrSWInstalledLastUpdateTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when the hrSWInstalledTable
+        was last completely updated.  Because caching of this
+        data will be a popular implementation strategy,
+        retrieval of this object allows a management station
+        to obtain a guarantee that no data in this table is
+        older than the indicated time."
+    ::= { hrSWInstalled 2 }
+
+hrSWInstalledTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWInstalledEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of software installed on this
+        host."
+    ::= { hrSWInstalled 3 }
+
+hrSWInstalledEntry OBJECT-TYPE
+    SYNTAX     HrSWInstalledEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for a piece of software
+        installed on this host.
+
+        As an example of how objects in this table are named,
+        an instance of the hrSWInstalledName object might be
+        named hrSWInstalledName.96"
+    INDEX { hrSWInstalledIndex }
+    ::= { hrSWInstalledTable 1 }
+
+HrSWInstalledEntry ::= SEQUENCE {
+        hrSWInstalledIndex       Integer32,
+        hrSWInstalledName        InternationalDisplayString,
+        hrSWInstalledID          ProductID,
+        hrSWInstalledType        INTEGER,
+        hrSWInstalledDate        DateAndTime
+}
+
+hrSWInstalledIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each piece of software installed
+        on the host.  This value shall be in the range from 1
+        to the number of pieces of software installed on the
+        host."
+    ::= { hrSWInstalledEntry 1 }
+
+hrSWInstalledName OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this installed piece of
+        software, including the manufacturer, revision, the
+        name by which it is commonly known, and optionally,
+        its serial number."
+    ::= { hrSWInstalledEntry 2 }
+
+hrSWInstalledID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of this installed piece of software."
+    ::= { hrSWInstalledEntry 3 }
+
+hrSWInstalledType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   operatingSystem(2),
+                   deviceDriver(3),
+                   application(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this software."
+    ::= { hrSWInstalledEntry 4 }
+
+hrSWInstalledDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The last-modification date of this application as it
+        would appear in a directory listing.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrSWInstalledEntry 5 }
+
+-- Conformance information
+
+hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }
+hrMIBGroups      OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }
+
+-- Compliance Statements
+hrMIBCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The requirements for conformance to the Host Resources MIB."
+    MODULE -- this module
+      MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup,
+                         hrDeviceGroup }
+
+      OBJECT hrSystemDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrSystemInitialLoadDevice
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrSystemInitialLoadParameters
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrStorageSize
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrFSLastFullBackupDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrFSLastPartialBackupDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      GROUP hrSWRunGroup
+          DESCRIPTION
+              "The Running Software Group. Implementation
+              of this group is mandatory only when the
+              hrSWRunPerfGroup is implemented."
+
+      OBJECT hrSWRunStatus
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      GROUP hrSWRunPerfGroup
+          DESCRIPTION
+              "The Running Software Performance Group.
+              Implementation of this group is at the discretion
+              of the implementor."
+
+      GROUP hrSWInstalledGroup
+          DESCRIPTION
+              "The Installed Software Group.
+              Implementation of this group is at the discretion
+              of the implementor."
+    ::= { hrMIBCompliances 1 }
+
+    hrSystemGroup OBJECT-GROUP
+        OBJECTS {
+            hrSystemUptime, hrSystemDate,
+            hrSystemInitialLoadDevice,
+            hrSystemInitialLoadParameters,
+            hrSystemNumUsers, hrSystemProcesses,
+            hrSystemMaxProcesses
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources System Group."
+        ::= { hrMIBGroups 1 }
+
+    hrStorageGroup OBJECT-GROUP
+        OBJECTS {
+            hrMemorySize, hrStorageIndex, hrStorageType,
+            hrStorageDescr, hrStorageAllocationUnits,
+            hrStorageSize, hrStorageUsed,
+            hrStorageAllocationFailures
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Storage Group."
+        ::= { hrMIBGroups 2 }
+
+    hrDeviceGroup OBJECT-GROUP
+        OBJECTS {
+            hrDeviceIndex, hrDeviceType, hrDeviceDescr,
+            hrDeviceID, hrDeviceStatus, hrDeviceErrors,
+            hrProcessorFrwID, hrProcessorLoad,
+            hrNetworkIfIndex, hrPrinterStatus,
+            hrPrinterDetectedErrorState,
+            hrDiskStorageAccess, hrDiskStorageMedia,
+            hrDiskStorageRemoveble, hrDiskStorageCapacity,
+            hrPartitionIndex, hrPartitionLabel,
+            hrPartitionID, hrPartitionSize,
+            hrPartitionFSIndex, hrFSIndex, hrFSMountPoint,
+            hrFSRemoteMountPoint, hrFSType, hrFSAccess,
+            hrFSBootable, hrFSStorageIndex,
+            hrFSLastFullBackupDate,
+            hrFSLastPartialBackupDate
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Device Group."
+        ::= { hrMIBGroups 3 }
+
+    hrSWRunGroup OBJECT-GROUP
+        OBJECTS {
+            hrSWOSIndex, hrSWRunIndex, hrSWRunName,
+            hrSWRunID, hrSWRunPath, hrSWRunParameters,
+            hrSWRunType, hrSWRunStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Running Software Group."
+        ::= { hrMIBGroups 4 }
+
+    hrSWRunPerfGroup OBJECT-GROUP
+        OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Running Software
+            Performance Group."
+        ::= { hrMIBGroups 5 }
+
+    hrSWInstalledGroup OBJECT-GROUP
+        OBJECTS {
+            hrSWInstalledLastChange,
+            hrSWInstalledLastUpdateTime,
+            hrSWInstalledIndex, hrSWInstalledName,
+            hrSWInstalledID, hrSWInstalledType,
+            hrSWInstalledDate
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Installed Software Group."
+        ::= { hrMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/HPR-IP-MIB.mib b/snmp_builder/mibs/HPR-IP-MIB.mib
new file mode 100644
index 0000000..343627e
--- /dev/null
+++ b/snmp_builder/mibs/HPR-IP-MIB.mib
@@ -0,0 +1,487 @@
+HPR-IP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,OBJECT-TYPE, Counter32
+                    FROM SNMPv2-SMI
+        DisplayString, RowStatus, TEXTUAL-CONVENTION
+                    FROM SNMPv2-TC
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                    FROM SNMPv2-CONF
+        SnaControlPointName
+                    FROM APPN-MIB
+        hprObjects, hprCompliances, hprGroups
+                    FROM HPR-MIB  ;
+
+hprIp   MODULE-IDENTITY
+   LAST-UPDATED "9809240000Z" -- September 24, 1998
+   ORGANIZATION "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
+   CONTACT-INFO
+       "
+               Bob Clouston
+               Cisco Systems
+               7025 Kit Creek Road
+               P.O. Box 14987
+               Research Triangle Park, NC 27709, USA
+               Tel:    1 919 472 2333
+               E-mail: clouston@cisco.com
+
+               Bob Moore
+               IBM Corporation
+               4205 S. Miami Boulevard
+               BRQA/501
+               P.O. Box 12195
+               Research Triangle Park, NC 27709, USA
+               Tel:    1 919 254 4436
+               E-mail: remoore@us.ibm.com
+       "
+   DESCRIPTION
+       "The MIB module for HPR over IP.  This module contains two
+       groups:
+
+        -  the HPR over IP Monitoring Group provides a count of the UDP
+           packets sent by a link station for each APPN traffic type.
+
+        -  the HPR over IP Configuration Group provides for reading and
+           setting the mappings between APPN traffic types and TOS
+           Precedence settings in the IP header.  These mappings are
+
+           configured at the APPN port level, and are inherited by the
+           APPN connection networks and link stations associated with an
+           APPN port.  A port-level mapping can, however, be overridden
+           for a particular connection network or link station."
+   REVISION  "9809240000Z" -- September 24, 1998
+   DESCRIPTION
+       "Initial version, Published as RFC 2584"
+   ::= { hprObjects 5 }
+
+-- *********************************************************************
+-- Textual Conventions
+-- *********************************************************************
+AppnTrafficType ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "APPN traffic type.  The first four values correspond
+          to APPN transmission priorities (network, high, medium and
+          low), while the fifth is used for both LLC commands (XID,
+          TEST, DISC, and DM) and function-routed NLPs (XID_DONE_RQ
+          and XID_DONE_RSP)."
+      SYNTAX INTEGER { low (1),
+                       medium (2),
+                       high (3),
+                       network (4),
+                       llcAndFnRoutedNlp (5) }
+
+AppnTOSPrecedence ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "A DisplayString representing the setting of the three TOS
+          Precedence bits in the IP Type of Service field for this APPN
+          traffic type.  The HPR over IP architecture specifies the
+          following default mapping:
+
+               APPN traffic type           IP TOS Precedence bits
+               ------------------          ----------------------
+                Network                     110
+                High                        100
+                Medium                      010
+                Low                         001
+                LLC commands, etc.          110
+          "
+      SYNTAX DisplayString (SIZE(3))
+
+-- *******************************************************************
+
+-- hprObjects              OBJECT IDENTIFIER ::= { hprMIB 1 }
+-- *******************************************************************
+
+-- *******************************************************************
+-- HPR over IP Monitoring Group
+--
+-- This group contains a single table, the hprIsActiveLsTable,
+-- providing a  count of UDP packets sent with each type of
+-- APPN traffic on each active link supporting HPR over IP.
+-- *******************************************************************
+hprIpActiveLsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprIpActiveLsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The HPR/IP active link station table.  This table provides
+          counts of the number of UDP packets sent for each APPN
+          traffic type."
+      ::= { hprIp 1 }
+
+hprIpActiveLsEntry OBJECT-TYPE
+      SYNTAX HprIpActiveLsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of the HPR/IP link station table."
+      INDEX { hprIpActiveLsLsName,
+              hprIpActiveLsAppnTrafficType }
+      ::= { hprIpActiveLsTable 1 }
+
+HprIpActiveLsEntry ::= SEQUENCE {
+        hprIpActiveLsLsName              DisplayString,
+        hprIpActiveLsAppnTrafficType     AppnTrafficType,
+        hprIpActiveLsUdpPackets          Counter32 }
+
+hprIpActiveLsLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the link station.  If this
+          object has the same value as the appnLsName in the APPN MIB,
+          then the two objects are referring to the same APPN link
+          station."
+      ::= { hprIpActiveLsEntry 1 }
+
+hprIpActiveLsAppnTrafficType OBJECT-TYPE
+      SYNTAX AppnTrafficType
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPN traffic type being sent through the link station."
+      ::= { hprIpActiveLsEntry 2 }
+
+hprIpActiveLsUdpPackets OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of outgoing UDP packets carrying this type of APPN
+          traffic.  A discontinuity in the counter is indicated by the
+          appnLsCounterDisconTime object in the APPN MIB."
+      ::= { hprIpActiveLsEntry 3 }
+
+-- *******************************************************************
+-- HPR over IP Configuration Group
+--
+-- This group contains three tables for reading and setting the
+-- mapping between APPN traffic types and values for the TOS
+-- Precedence bits in the IP header.  hprIpAppnPortTOSPrecedence
+-- represents the APPN port-level mapping.  This mapping can be
+-- overridden for an individual link station or an individual
+-- connection network via, respectively, the hprIpLsTOSPrecedence
+-- and the hprIpCnTOSPrecedence objects.
+-- *******************************************************************
+
+hprIpAppnPortTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprIpAppnPortEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The HPR/IP APPN port table.  This table supports reading and
+          setting the mapping between APPN traffic types and TOS
+          Precedence settings for all the link stations at this APPN
+          port.  This mapping can be overridden for an individual link
+          station or an individual connection network via, respectively,
+          the hprIpLsTOSPrecedence and the hprIpCnTOSPrecedence objects."
+      ::= { hprIp 2 }
+
+hprIpAppnPortEntry OBJECT-TYPE
+      SYNTAX HprIpAppnPortEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of the HPR/IP APPN port table.  Entries exist for
+          every APPN port defined to support HPR over IP."
+      INDEX { hprIpAppnPortName,
+              hprIpAppnPortAppnTrafficType }
+      ::= { hprIpAppnPortTable 1 }
+
+HprIpAppnPortEntry ::= SEQUENCE {
+        hprIpAppnPortName            DisplayString,
+        hprIpAppnPortAppnTrafficType AppnTrafficType,
+        hprIpAppnPortTOSPrecedence   AppnTOSPrecedence }
+
+hprIpAppnPortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for this APPN port.  If this
+          object has the same value as the appnPortName in the APPN MIB,
+          then the two objects are referring to the same APPN port."
+      ::= { hprIpAppnPortEntry 1 }
+
+hprIpAppnPortAppnTrafficType OBJECT-TYPE
+      SYNTAX AppnTrafficType
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPN traffic type sent through the port."
+      ::= { hprIpAppnPortEntry 2 }
+
+hprIpAppnPortTOSPrecedence OBJECT-TYPE
+      SYNTAX AppnTOSPrecedence
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "A setting for the three TOS Precedence bits in the IP Type of
+          Service field for this APPN traffic type.
+
+          When this value is changed via a Set operation, the new setting
+          for the TOS Precedence bits takes effect immediately, rather
+
+          than waiting for some event such as reinitialization of the
+          port or of the APPN node itself."
+      ::= { hprIpAppnPortEntry 3 }
+
+-- *******************************************************************
+hprIpLsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprIpLsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The HPR/IP link station table.  Values for TOS Precedence at
+          the link station level override those at the level of the
+          containing port.  If there is no entry in this table for a
+          given link station, then that link station inherits its TOS
+          Precedence values from its port."
+      ::= { hprIp 3 }
+
+hprIpLsEntry OBJECT-TYPE
+      SYNTAX HprIpLsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of the HPR/IP link station table."
+      INDEX { hprIpLsLsName,
+              hprIpLsAppnTrafficType }
+      ::= { hprIpLsTable 1 }
+
+HprIpLsEntry ::= SEQUENCE {
+        hprIpLsLsName            DisplayString,
+        hprIpLsAppnTrafficType   AppnTrafficType,
+        hprIpLsTOSPrecedence     AppnTOSPrecedence,
+        hprIpLsRowStatus         RowStatus }
+
+hprIpLsLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..10))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned name for the link station.  If this
+          object has the same value as the appnLsName in the APPN MIB,
+          then the two objects are referring to the same APPN link
+          station."
+      ::= { hprIpLsEntry 1 }
+
+hprIpLsAppnTrafficType OBJECT-TYPE
+      SYNTAX AppnTrafficType
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPN traffic type sent through the link station."
+      ::= { hprIpLsEntry 2 }
+
+hprIpLsTOSPrecedence OBJECT-TYPE
+      SYNTAX AppnTOSPrecedence
+      MAX-ACCESS read-create
+      STATUS current
+      DESCRIPTION
+          "A setting for the three TOS Precedence bits in the IP Type of
+          Service field for this APPN traffic type.
+
+          When this value is changed via a Set operation, the new setting
+          for the TOS Precedence bits takes effect immediately, rather
+          than waiting for some event such as reinitialization of the
+          port or of the APPN node itself."
+      ::= { hprIpLsEntry 3 }
+
+hprIpLsRowStatus OBJECT-TYPE
+      SYNTAX RowStatus
+      MAX-ACCESS read-create
+      STATUS current
+      DESCRIPTION
+          "This object allows entries to be created and deleted in the
+          hprIpLsTable.  As soon as an entry becomes active, the mapping
+          between APPN traffic types and TOS Precedence settings that it
+          specifies becomes effective.
+
+          The value of the other accessible object in this entry,
+          hprIpLsTOSPrecedence, can be changed via a Set operation when
+          this object's value is active(1).
+
+          An entry in this table is deleted by setting this object to
+          destroy(6).  Deleting an entry in this table causes the
+          link station to revert to the default TOS Precedence
+          mapping for its port."
+      ::= { hprIpLsEntry 4 }
+
+-- *******************************************************************
+hprIpCnTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprIpCnEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The HPR/IP connection network table.  Values for TOS
+          Precedence at the connection network level override those at
+          the level of the containing port.  If there is no entry in
+          this table for a given connection network, then that
+          connection network inherits its TOS Precedence values from
+          its port.
+
+          A node may have connections to a given connection network
+          through multiple ports.  There is no provision in the HPR-IP
+          architecture for variations in TOS Precedence values for
+          a single connection network based on the port through which
+          traffic is flowing to the connection network.  Thus an entry
+          in this table overrides the port-level settings for all the
+          ports through which the node can reach the connection
+          network."
+      ::= { hprIp 4 }
+
+hprIpCnEntry OBJECT-TYPE
+      SYNTAX HprIpCnEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Entry of the HPR/IP connection network table."
+      INDEX { hprIpCnVrnName,
+              hprIpCnAppnTrafficType }
+      ::= { hprIpCnTable 1 }
+
+HprIpCnEntry ::= SEQUENCE {
+        hprIpCnVrnName           SnaControlPointName,
+        hprIpCnAppnTrafficType   AppnTrafficType,
+        hprIpCnTOSPrecedence     AppnTOSPrecedence,
+        hprIpCnRowStatus         RowStatus }
+
+hprIpCnVrnName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "SNA control point name of the virtual routing node (VRN) that
+
+          identifies the connection network in the APPN topology
+          database.  If this object has the same value as the appnVrnName
+          in the APPN MIB, then the two objects are referring
+          to the same APPN VRN."
+      ::= { hprIpCnEntry 1 }
+
+hprIpCnAppnTrafficType OBJECT-TYPE
+      SYNTAX AppnTrafficType
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "APPN traffic type sent to this connection network."
+      ::= { hprIpCnEntry 2 }
+
+hprIpCnTOSPrecedence OBJECT-TYPE
+      SYNTAX AppnTOSPrecedence
+      MAX-ACCESS read-create
+      STATUS current
+      DESCRIPTION
+          "A setting for the three TOS Precedence bits in the IP Type of
+          Service field for this APPN traffic type.  This setting applies
+          to all traffic sent to this connection network by this node,
+          regardless of the port through which the traffic is sent.
+
+          When this value is changed via a Set operation, the new setting
+          for the TOS Precedence bits takes effect immediately, rather
+          than waiting for some event such as reinitialization of a
+          port or of the APPN node itself."
+      ::= { hprIpCnEntry 3 }
+
+hprIpCnRowStatus OBJECT-TYPE
+      SYNTAX RowStatus
+      MAX-ACCESS read-create
+      STATUS current
+      DESCRIPTION
+          "This object allows entries to be created and deleted in the
+          hprIpCnTable.  As soon as an entry becomes active, the mapping
+          between APPN traffic types and TOS Precedence settings that it
+          specifies becomes effective.
+
+          The value of the other accessible object in this entry,
+          hprIpCnTOSPrecedence, can be changed via a Set operation when
+          this object's value is active(1).
+
+          An entry in this table is deleted by setting this object to
+          destroy(6).  Deleting an entry in this table causes the
+
+          connection network to revert to the default TOS Precedence
+          mapping for each port through which it is accessed."
+      ::= { hprIpCnEntry 4 }
+
+-- *******************************************************************
+-- Conformance Statement
+-- *******************************************************************
+-- Definitions imported from the HPR MIB:
+--   hprConformance      OBJECT IDENTIFIER ::= { hprMIB 2 }
+--   hprCompliances      OBJECT IDENTIFIER ::= { hprConformance 1 }
+--   hprGroups           OBJECT IDENTIFIER ::= { hprConformance 2 }
+
+-- Compliance statements
+hprIpCompliance MODULE-COMPLIANCE
+       STATUS current
+       DESCRIPTION
+      "Compliance statement for the HPR over IP MIB module."
+   MODULE   -- this module
+
+   --  Conditionally mandatory groups
+   GROUP hprIpMonitoringGroup
+      DESCRIPTION
+          "The hprIpMonitoringGroup is mandatory for APPN implementations
+          supporting HPR over IP."
+
+   GROUP hprIpConfigurationGroup
+      DESCRIPTION
+          "The hprIpConfigurationGroup is mandatory for APPN
+          implementations supporting HPR over IP.  It may, however,
+          be implemented as a collection of read-only objects."
+
+   OBJECT hprIpAppnPortTOSPrecedence
+   MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+   OBJECT hprIpLsTOSPrecedence
+   MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+   OBJECT hprIpLsRowStatus
+   MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+   OBJECT hprIpCnTOSPrecedence
+   MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+   OBJECT hprIpCnRowStatus
+   MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+::= { hprCompliances 2 }
+
+-- Group definitions
+
+hprIpMonitoringGroup OBJECT-GROUP
+      OBJECTS { hprIpActiveLsUdpPackets }
+      STATUS current
+      DESCRIPTION
+          "An object for counting outgoing HPR/IP traffic for each APPN
+          traffic type."
+::= { hprGroups 5 }
+
+hprIpConfigurationGroup OBJECT-GROUP
+      OBJECTS { hprIpAppnPortTOSPrecedence,
+                hprIpLsTOSPrecedence,
+                hprIpLsRowStatus,
+                hprIpCnTOSPrecedence,
+                hprIpCnRowStatus }
+      STATUS current
+      DESCRIPTION
+          "A collection of HPR/IP objects representing the mappings
+          between APPN traffic types and TOS Precedence bits at the APPN
+          port, APPN link station, and APPN connection network levels."
+::= { hprGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/HPR-MIB.mib b/snmp_builder/mibs/HPR-MIB.mib
new file mode 100644
index 0000000..3474dc6
--- /dev/null
+++ b/snmp_builder/mibs/HPR-MIB.mib
@@ -0,0 +1,1270 @@
+HPR-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+        DisplayString, DateAndTime, TimeStamp, TEXTUAL-CONVENTION
+                FROM SNMPv2-TC
+
+        Counter32, Gauge32, Unsigned32, TimeTicks,
+        OBJECT-TYPE, MODULE-IDENTITY
+                FROM SNMPv2-SMI
+
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF
+
+        snanauMIB
+                FROM SNA-NAU-MIB
+
+        SnaControlPointName
+                FROM APPN-MIB;
+
+hprMIB MODULE-IDENTITY
+        LAST-UPDATED  "9705140000Z"
+        ORGANIZATION  "AIW APPN / HPR MIB SIG"
+        CONTACT-INFO
+                "
+
+                        Bob Clouston
+                        Cisco Systems
+                        7025 Kit Creek Road
+                        P.O. Box 14987
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 472 2333
+                        E-mail: clouston@cisco.com
+
+                        Bob Moore
+                        IBM Corporation
+                        800 Park Offices Drive
+                        RHJA/664
+                        P.O. Box 12195
+
+                        Research Triangle Park, NC 27709, USA
+                        Tel:    1 919 254 4436
+                        E-mail: remoore@ralvm6.vnet.ibm.com
+                "
+      DESCRIPTION
+                "This is the MIB module for objects used to
+                 manage network devices with HPR capabilities."
+::= { snanauMIB 6 }
+-- snanauMIB ::= { mib-2 34 }
+
+-- *********************************************************************
+-- Textual Conventions
+-- *********************************************************************
+-- SnaControlPointName is imported from the APPN MIB
+
+HprNceTypes ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "A bit string identifying the set of functions provided by a
+          network connection endpoint (NCE).  The following values are
+          defined:
+
+                bit 0:  control point
+                bit 1:  logical unit
+                bit 2:  boundary function
+                bit 3:  route setup
+          "
+      SYNTAX BITS { controlPoint(0),
+                    logicalUnit(1),
+                    boundaryFunction(2),
+                    routeSetup(3) }
+
+HprRtpCounter ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "An object providing statistics for an RTP connection.  A
+          Management Station can detect discontinuities in this counter
+          by monitoring the correspondingly indexed
+          hprRtpCounterDisconTime object."
+      SYNTAX Counter32
+
+-- *********************************************************************
+  hprObjects         OBJECT IDENTIFIER ::= { hprMIB 1 }
+-- *********************************************************************
+
+-- *********************************************************************
+
+hprGlobal            OBJECT IDENTIFIER ::= { hprObjects 1 }
+-- *********************************************************************
+-- The hprGlobal group applies to both intermediate and end nodes.
+-- *********************************************************************
+
+hprNodeCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned network name for the APPN node
+          where this HPR implementation resides.  If this object has
+          the same value as the appnNodeCpName object in the APPN MIB,
+          then the two objects are referring to the same APPN node."
+      ::= { hprGlobal 1 }
+
+hprOperatorPathSwitchSupport  OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notSupported(1),
+                      switchTriggerSupported(2),
+                      switchToPathSupported(3)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "This object indicates an implementation's level of support
+          for an operator-requested path switch.
+
+            notSupported(1)           - the agent does not support
+                                        operator-requested path switches
+            switchTriggerSupported(2) - the agent supports a 'switch
+                                        path now' command from an
+                                        operator, but not a command to
+                                        switch to a specified path
+            switchToPathSupported(3)  - the agent supports both a
+                                        'switch path now' command and a
+                                        command to switch to a specified
+                                        path.  Note that the latter
+                                        command is not available via
+                                        this MIB; a system that supports
+                                        it must do so via other means,
+                                        such as a local operator
+                                        interface."
+      ::= { hprGlobal 2 }
+
+-- *********************************************************************
+
+hprAnrRouting        OBJECT IDENTIFIER ::= { hprObjects 2 }
+-- *********************************************************************
+
+hprAnrsAssigned OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "ANR labels"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of ANR labels assigned by this node since it was
+          last re-initialized.  A Management Station can detect
+          discontinuities in this counter by monitoring the
+          appnNodeCounterDisconTime object in the APPN MIB."
+      ::= { hprAnrRouting 1 }
+
+hprAnrCounterState  OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "This object is used for a network management station to turn
+          on/off the counting of ANR packets in the hprAnrRoutingTable.
+          The initial value of this object is an implementation choice.
+
+                 notActive(1) - the counter hprAnrPacketsReceived
+                                returns no meaningful value
+                 active(2)    - the counter hprAnrPacketsReceived is
+                                being incremented and is returning
+                                meaningful values"
+      ::= { hprAnrRouting 2 }
+
+hprAnrCounterStateTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time when the hprAnrCounterState object last changed its
+          value.  The initial value returned by this object is the time
+          at which the APPN node instrumented with this MIB was last
+          brought up."
+      ::= { hprAnrRouting 3 }
+
+hprAnrRoutingTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprAnrRoutingEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The ANR Routing table provides a means of correlating an
+          incoming ANR label (i.e., one assigned by this node) with the
+          TG over which a packet containing the label will be forwarded.
+          When the ANR label identifies a local NCE, the hprAnrOutTgDest
+          and hprAnrOutTgNum objects have no meaning.  The table also
+          contains an object to count the number of packets received
+          with a given ANR label."
+      ::= { hprAnrRouting 4 }
+
+hprAnrRoutingEntry OBJECT-TYPE
+      SYNTAX HprAnrRoutingEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The ANR label is used to index this table."
+      INDEX  { hprAnrLabel }
+      ::= { hprAnrRoutingTable 1 }
+
+HprAnrRoutingEntry ::= SEQUENCE {
+     hprAnrLabel             OCTET STRING,
+     hprAnrType              INTEGER,
+     hprAnrOutTgDest         DisplayString,
+     hprAnrOutTgNum          INTEGER,
+     hprAnrPacketsReceived   Counter32,
+     hprAnrCounterDisconTime TimeStamp
+     }
+
+hprAnrLabel OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The first ANR label in an incoming packet."
+      ::= { hprAnrRoutingEntry 1 }
+
+hprAnrType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      nce(1),
+                      tg(2)
+
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "An object indicating whether an ANR label assigned by this
+          node identifies a local NCE or a TG on which outgoing packets
+          are forwarded.
+
+              nce(1)  - the ANR label identifies a local NCE.  In this
+                        case the hprAnrOutTgDest and hprAnrOutTgNum
+                        objects have no meaning.
+              tg(2)   - the ANR label identifies a TG."
+      ::= { hprAnrRoutingEntry 2 }
+
+hprAnrOutTgDest OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (0 | 3..17))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Destination node for the TG over which packets with this ANR
+          label are forwarded.  This is the fully qualified name of an
+          APPN network node or end node, formatted according to the
+          SnaControlPointName textual convention.  If the ANR label
+          identifies a local NCE, then this object returns a zero-length
+          string.
+
+          This object corresponds to the appnLocalTgDest object in the
+          APPN MIB."
+      ::= { hprAnrRoutingEntry 3 }
+
+hprAnrOutTgNum OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Number of the TG over which packets with this ANR label are
+          forwarded.  If the ANR label identifies a local NCE, then this
+          object returns the value 0, since 0 is not a valid TG number
+          for a TG that supports HPR.
+
+          This object corresponds to the appnLocalTgNum object in the
+          APPN MIB."
+      ::= { hprAnrRoutingEntry 4 }
+
+hprAnrPacketsReceived OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "ANR packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of packets received with this ANR label as their
+          first label.
+
+          A Management Station can detect discontinuities in this
+          counter by monitoring the hprAnrCounterDisconTime object in
+          the same row."
+      ::= { hprAnrRoutingEntry 5 }
+
+hprAnrCounterDisconTime OBJECT-TYPE
+      SYNTAX TimeStamp
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the sysUpTime object when the
+          hprAnrPacketsReceived counter for this ANR label last
+          experienced a discontinuity.  This will be the more recent of
+          two times:  the time at which the ANR label was associated with
+          either an outgoing TG or a local NCE, or the time at which the
+          ANR counters were last turned on or off."
+      ::= { hprAnrRoutingEntry 6 }
+
+-- *********************************************************************
+hprTransportUser     OBJECT IDENTIFIER ::= { hprObjects 3 }
+-- *********************************************************************
+-- Transport Service User (TU) Table: (RTP Connection Users)
+--
+-- There will be several users of the HPR transport and each HPR node
+-- shall maintain a table of these users.
+-- *********************************************************************
+
+hprNceTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprNceEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The Network Connection Endpoint (NCE) table."
+      ::= { hprTransportUser 1 }
+
+hprNceEntry OBJECT-TYPE
+      SYNTAX HprNceEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The NCE ID is used to index this table."
+      INDEX  { hprNceId }
+      ::= { hprNceTable 1 }
+
+HprNceEntry ::= SEQUENCE {
+     hprNceId            OCTET STRING,
+     hprNceType          HprNceTypes,
+     hprNceDefault       HprNceTypes,
+     hprNceInstanceId    OCTET STRING
+     }
+
+hprNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The Network Connection Endpoint (NCE) ID.  NCEs identify
+          Control Points (Cp), Logical Units (Lu), HPR Boundary
+          Functions (Bf) and Route Setup (Rs) Functions.  A value for
+          this object can be retrieved from any of the following
+          objects in the APPN MIB:
+
+               - appnLsCpCpNceId
+               - appnLsRouteNceId
+               - appnLsBfNceId
+               - appnIsInRtpNceId
+               - appnIsRtpNceId
+
+          In each case this value identifies a row in this table
+          containing information related to that in the APPN MIB."
+      ::= { hprNceEntry 1 }
+
+hprNceType OBJECT-TYPE
+      SYNTAX HprNceTypes
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A bit string identifying the function types provided by this
+          Network Connection Endpoint (NCE)."
+      ::= { hprNceEntry 2 }
+
+hprNceDefault OBJECT-TYPE
+      SYNTAX HprNceTypes
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "A bit string identifying the function types for which this
+          Network Connection Endpoint (NCE) is the default NCE.  While
+          default NCEs are not explicitly defined in the architecture,
+          some implementations provide them; for such implementations,
+          it is useful to make this information available to a
+          Management Station."
+      ::= { hprNceEntry 3 }
+
+hprNceInstanceId   OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (4))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The NCE instance identifier (NCEII) identifying the current
+          instance of this NCE.  An NCEII is used to denote different
+          instances (IPLs) of an NCE component.  Each time an NCE is
+          activated (IPL'd), it acquires a different, unique NCEII."
+      ::= { hprNceEntry 4 }
+
+-- *********************************************************************
+hprRtp               OBJECT IDENTIFIER ::= { hprObjects 4 }
+-- *********************************************************************
+-- *********************************************************************
+--
+-- The RTP group is implemented by all managed nodes supporting the
+-- HPR Transport Tower.  The group contains several scalars (simple
+-- objects) and a table.
+-- *********************************************************************
+
+-- *********************************************************************
+hprRtpGlobe          OBJECT IDENTIFIER ::= { hprRtp 1}
+-- *********************************************************************
+hprRtpGlobeConnSetups  OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "RTP connection setups"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of RTP connection setups in which this node has
+          participated, as either sender or receiver, since it was last
+          re-initialized.  Retries of a setup attempt do not cause the
+
+          counter to be incremented.
+
+          A Management Station can detect discontinuities in this
+          counter by monitoring the appnNodeCounterDisconTime object
+          in the APPN MIB."
+      ::= { hprRtpGlobe 1 }
+
+hprRtpGlobeCtrState OBJECT-TYPE
+      SYNTAX INTEGER {
+                      notActive(1),
+                      active(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "This object allows a network management station to turn the
+          counters in the hprRtpTable on and off.  The initial value of
+          this object is an implementation choice.
+
+                 notActive(1) - the counters in the hprRtpTable are
+                                returning no meaningful values
+                 active(2)    - the counters in the hprRtpTable are
+                                being incremented and are returning
+                                meaningful values"
+      ::= { hprRtpGlobe 2 }
+
+hprRtpGlobeCtrStateTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time when the value of the hprRtpGlobeCtrState object
+          last changed.  The initial value returned by this object is
+          the time at which the APPN node instrumented with this MIB
+          was last brought up."
+      ::= { hprRtpGlobe 3 }
+
+-- *********************************************************************
+-- The RTP Connection Table
+-- There may be many RTP connections on a node supporting the functions
+-- specified in the RTP option set.  Each node implementing this option
+-- set shall maintain a table of these RTP connections.
+-- *********************************************************************
+
+hprRtpTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprRtpEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The RTP Connection table"
+      ::= { hprRtp 2 }
+
+hprRtpEntry OBJECT-TYPE
+      SYNTAX HprRtpEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local NCE ID and local TCID are used to index this
+          table."
+      INDEX
+             { hprRtpLocNceId,
+               hprRtpLocTcid }
+      ::= { hprRtpTable 1 }
+
+HprRtpEntry ::= SEQUENCE {
+     hprRtpLocNceId          OCTET STRING,       -- local nce id
+     hprRtpLocTcid           OCTET STRING,       -- local tcid
+     hprRtpRemCpName         SnaControlPointName,-- remote cp name
+     hprRtpRemNceId          OCTET STRING,       -- remote nce id
+     hprRtpRemTcid           OCTET STRING,       -- remote tcid
+     hprRtpPathSwitchTrigger INTEGER,            -- trigger (read-write)
+     hprRtpRscv              OCTET STRING,       -- rscv
+     hprRtpTopic             DisplayString,      -- topic (cos)
+     hprRtpState             INTEGER,            -- state
+     hprRtpUpTime            TimeTicks,          -- up time
+
+     hprRtpLivenessTimer     Unsigned32,         -- liveness timer
+     hprRtpShortReqTimer     Unsigned32,         -- short request timer
+     hprRtpPathSwTimer       Unsigned32,         -- path switch timer
+     hprRtpLivenessTimeouts  HprRtpCounter,      -- liveness timeouts
+     hprRtpShortReqTimeouts  HprRtpCounter,      -- short req timeouts
+
+     hprRtpMaxSendRate       Gauge32,            -- maximum send rate
+     hprRtpMinSendRate       Gauge32,            -- minimum send rate
+     hprRtpCurSendRate       Gauge32,            -- current send rate
+
+     hprRtpSmRdTripDelay     Gauge32,            -- smooth rnd trip
+                                                    delay
+
+     hprRtpSendPackets       HprRtpCounter,      -- packets sent
+
+     hprRtpRecvPackets       HprRtpCounter,      -- packets received
+     hprRtpSendBytes         HprRtpCounter,      -- bytes sent
+     hprRtpRecvBytes         HprRtpCounter,      -- bytes received
+
+     hprRtpRetrPackets       HprRtpCounter,      -- pkts re-xmitted
+     hprRtpPacketsDiscarded  HprRtpCounter,      -- pkts discarded
+     hprRtpDetectGaps        HprRtpCounter,      -- gaps detected
+     hprRtpRateReqSends      HprRtpCounter,      -- rate req send
+
+     hprRtpOkErrPathSws      HprRtpCounter,      -- ok  err path sws
+     hprRtpBadErrPathSws     HprRtpCounter,      -- bad err path sws
+     hprRtpOkOpPathSws       HprRtpCounter,      -- ok  op  path sws
+     hprRtpBadOpPathSws      HprRtpCounter,      -- bad op  path sws
+
+     hprRtpCounterDisconTime TimeStamp           -- discontinuity ind
+        }
+
+hprRtpLocNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local Network Connection Endpoint (NCE) ID of this RTP
+          connection.  NCEs identify CPs, LUs, Boundary Functions (BFs),
+          and Route Setup (RS) components.  A value for this object can
+          be retrieved from any of the following objects in the APPN
+          MIB:
+
+               - appnLsCpCpNceId
+               - appnLsRouteNceId
+               - appnLsBfNceId
+               - appnIsInRtpNceId
+               - appnIsRtpNceId
+
+          In each case this value identifies a row in this table
+          containing information related to that in the APPN MIB."
+      ::= { hprRtpEntry 1 }
+
+hprRtpLocTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local TCID of this RTP connection.  A value for this
+          object can be retrieved from either the appnIsInRtpTcid object
+          or the appnIsRtpTcid object the APPN MIB; in each case this
+          value identifies a row in this table containing information
+
+          related to that in the APPN MIB."
+      ::= { hprRtpEntry 2 }
+
+hprRtpRemCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned network name for the remote node of
+          this RTP connection."
+      ::= { hprRtpEntry 3 }
+
+hprRtpRemNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The remote Network Connection Endpoint (NCE) of this RTP
+          connection.  NCEs identify CPs, LUs, Boundary Functions (BFs),
+          and Route Setup (RS) components."
+      ::= { hprRtpEntry 4 }
+
+hprRtpRemTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The remote TCID of this RTP connection."
+      ::= { hprRtpEntry 5 }
+
+hprRtpPathSwitchTrigger OBJECT-TYPE
+      SYNTAX INTEGER {
+                      ready(1),
+                      switchPathNow(2)
+                     }
+      MAX-ACCESS read-write
+      STATUS current
+      DESCRIPTION
+          "Object by which a Management Station can trigger an operator-
+          requested path switch, by setting the value to
+          switchPathNow(2).  Setting this object to switchPathNow(2)
+          triggers a path switch even if its previous value was already
+          switchPathNow(2).
+
+          The value ready(1) is returned on GET operations until a SET
+          has been processed; after that the value received on the most
+          recent SET is returned.
+
+          This MIB module provides no support for an operator-requested
+          switch to a specified path."
+      ::= { hprRtpEntry 6 }
+
+hprRtpRscv OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..255))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The forward Route Selection Control Vector for this RTP
+          connection.  The format of this vector is described in SNA
+          Formats.
+
+          The value returned in this object during a path switch is
+          implementation-dependent:  it may be the old path, the new
+          path, a zero-length string, or some other valid RSCV string."
+      ::= { hprRtpEntry 7 }
+
+hprRtpTopic OBJECT-TYPE
+      SYNTAX DisplayString (SIZE(8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The topic for this RTP connection.  This is used to indicate
+          the Class of Service."
+      ::= { hprRtpEntry 8 }
+
+hprRtpState OBJECT-TYPE
+      SYNTAX INTEGER {
+                      rtpListening(1),
+                      rtpCalling(2),
+                      rtpConnected(3),
+                      rtpPathSwitching(4),
+                      rtpDisconnecting(5),
+                      other(99)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The state of the RTP connection, from the perspective of the
+          local RTP protocol machine:
+
+              rtpListening      - connection open; waiting for other end
+                                  to call in
+              rtpCalling        - connection opened, attempting to call
+                                  out, have not yet received any data
+                                  from other end
+              rtpConnected      - connection is active; responded to a
+                                  call-in or received other end's TCID
+                                  from a call-out attempt
+              rtpPathSwitching  - the path switch timer is running;
+                                  attempting to find a new path for this
+                                  connection.
+              rtpDisconnecting  - no sessions are using this connection;
+                                  in process of bringing it down
+              other             - the connection is not in any of the
+                                  states listed above."
+      ::= { hprRtpEntry 9 }
+
+hprRtpUpTime OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "1/100ths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The length of time the RTP connection has been up, measured
+          in 1/100ths of a second."
+      ::= { hprRtpEntry 10 }
+
+hprRtpLivenessTimer OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "1/100ths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the liveness (ALIVE) timer of this RTP
+          connection, in units of 1/100th of a second.  When this timer
+          expires and no packet has arrived from the partner since it
+          was last set, packets with Status Request indicators will be
+          sent to see if the RTP connection is still alive."
+      ::= { hprRtpEntry 11 }
+
+hprRtpShortReqTimer  OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "1/100ths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the RTP SHORT_REQ timer, in units of 1/100 of a
+          second.  This timer represents the maximum time that a sender
+          waits for a reply from a receiver."
+      ::= { hprRtpEntry 12 }
+
+hprRtpPathSwTimer OBJECT-TYPE
+      SYNTAX Unsigned32
+      UNITS "1/100ths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The length of time that RTP should attempt a path switch
+          for a connection, in units of 1/100th of a second."
+      ::= { hprRtpEntry 13 }
+
+hprRtpLivenessTimeouts OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "liveness timeouts"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of liveness timeouts for this RTP connection."
+      ::= { hprRtpEntry 14 }
+
+hprRtpShortReqTimeouts OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "short request timeouts"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of short request timeouts for this RTP connection."
+      ::= { hprRtpEntry 15 }
+
+hprRtpMaxSendRate OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "bytes per second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The high-water mark for this RTP connection's send rate, in
+          units of bytes per second.  This is the high-water mark for
+          the entire life of the connection, not just the high-water
+          mark for the connection's current path.
+
+          For more details on this and other parameters related to HPR,
+          see the High Performance Routing Architecture Reference."
+      ::= { hprRtpEntry 16 }
+
+hprRtpMinSendRate OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "bytes per second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The low-water mark for this RTP connection's send rate, in
+          units of bytes per second.  This is the low-water mark for the
+          entire life of the connection, not just the low-water mark for
+          the connection's current path.
+
+          For more details on this and other parameters related to HPR,
+          see the High Performance Routing Architecture Reference."
+      ::= { hprRtpEntry 17 }
+
+hprRtpCurSendRate OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "bytes per second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The current send rate for this RTP connection, in units of
+          bytes per second.
+
+          For more details on this and other parameters related to HPR,
+          see the High Performance Routing Architecture Reference."
+      ::= { hprRtpEntry 18 }
+
+hprRtpSmRdTripDelay OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "1/1000ths of a second"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The smoothed round trip delay for this RTP connection, in
+          units of 1/1000th of a second (ms).
+
+          For more details on this and other parameters related to HPR,
+          see the High Performance Routing Architecture Reference."
+      ::= { hprRtpEntry 19 }
+
+hprRtpSendPackets OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "RTP packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of packets successfully sent on this RTP
+          connection."
+      ::= { hprRtpEntry 20 }
+
+hprRtpRecvPackets OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "RTP packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of packets received on this RTP connection.  The
+          counter is incremented only once if duplicate copies of a
+          packet are received."
+      ::= { hprRtpEntry 21 }
+
+hprRtpSendBytes OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of bytes sent on this RTP connection.  Both RTP
+          Transport Header (THDR) bytes and data bytes are included in
+          this count."
+      ::= { hprRtpEntry 22 }
+
+hprRtpRecvBytes OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "bytes"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of bytes received on this RTP connection.  Both RTP
+          Transport Header (THDR) bytes and data bytes are included in
+          this count."
+      ::= { hprRtpEntry 23 }
+
+hprRtpRetrPackets OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "RTP packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of packets retransmitted on this RTP connection."
+      ::= { hprRtpEntry 24 }
+
+hprRtpPacketsDiscarded OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "RTP packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of packets received on this RTP connection and then
+          discarded.  A packet may be discarded because it is determined
+          to be a duplicate, or for other reasons."
+      ::= { hprRtpEntry 25 }
+
+hprRtpDetectGaps OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "gaps"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of gaps detected on this RTP connection."
+      ::= { hprRtpEntry 26 }
+
+hprRtpRateReqSends OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "rate requests"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of Rate Requests sent on this RTP connection."
+      ::= { hprRtpEntry 27 }
+
+hprRtpOkErrPathSws OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "path switch attempts"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of successful path switch attempts for this RTP
+
+          connection due to errors."
+      ::= { hprRtpEntry 28 }
+
+hprRtpBadErrPathSws OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "path switch attempts"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of unsuccessful path switches for this RTP
+          connection due to errors."
+      ::= { hprRtpEntry 29 }
+
+hprRtpOkOpPathSws OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "path switches"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of successful path switches for this RTP connection
+          due to operator requests."
+      ::= { hprRtpEntry 30 }
+
+hprRtpBadOpPathSws OBJECT-TYPE
+      SYNTAX HprRtpCounter
+      UNITS "path switches"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The count of unsuccessful path switches for this RTP
+          connection due to operator requests.  This counter is not
+          incremented by an implementation that does not support
+          operator-requested path switches, even if a Management Station
+          requests such a path switch by setting the
+          hprRtpPathSwitchTrigger object."
+      ::= { hprRtpEntry 31 }
+
+hprRtpCounterDisconTime OBJECT-TYPE
+      SYNTAX TimeStamp
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The value of the sysUpTime object when the counters for this
+          RTP connection last experienced a discontinuity.  This will be
+
+          the more recent of two times:  the time at which the
+          connection was established or the time at which the HPR
+          counters were last turned on or off."
+      ::= { hprRtpEntry 32 }
+
+-- *********************************************************************
+-- The RTP Connection Status Table
+--  This table contains statistics and historical information related to
+--  both successful and unsuccessful RTP path switches.  This
+--  information can be important for both trend analysis and problem
+--  determination.
+--
+--  Note the terminology here:  when RTP is triggered to find a new path
+--  for a connection, this initiates a 'path switch,' which will end up
+--  being either successful or unsuccessful.  During this path switch,
+--  RTP will make one or more 'path switch attempts,' which are attempts
+--  to find a new path for the connection and switch the connection to
+--  it.  This 'new' path may be the same path that the connection was
+--  using before the path switch.
+--
+--  It is an implementation option how many entries to keep in this
+--  table, and how long to retain any individual entry.
+-- *********************************************************************
+hprRtpStatusTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF HprRtpStatusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "RTP Connection Status Table:  This table contains historical
+          information on RTP connections.  An entry is created in this
+          table when a path switch is completed, either successfully or
+          unsuccessfully."
+      ::= { hprRtp 3 }
+
+hprRtpStatusEntry OBJECT-TYPE
+      SYNTAX HprRtpStatusEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "This table is indexed by local NCE ID, local TCID, and an
+          integer hprRtpStatusIndex.  Thus the primary grouping of table
+          rows is by RTP connection, with the multiple entries for a
+          given RTP connection ordered by time."
+      INDEX
+             { hprRtpStatusLocNceId,
+               hprRtpStatusLocTcid,
+               hprRtpStatusIndex }
+      ::= { hprRtpStatusTable 1 }
+
+  HprRtpStatusEntry ::= SEQUENCE {
+     hprRtpStatusLocNceId          OCTET STRING, -- local nce id
+     hprRtpStatusLocTcid           OCTET STRING, -- local tcid
+     hprRtpStatusIndex             Unsigned32,   -- index
+     hprRtpStatusStartTime         DateAndTime,  -- time stamp
+     hprRtpStatusEndTime           DateAndTime,  -- time stamp
+     hprRtpStatusRemCpName         SnaControlPointName,-- remote cp name
+     hprRtpStatusRemNceId          OCTET STRING, -- remote nce id
+     hprRtpStatusRemTcid           OCTET STRING, -- remote tcid
+     hprRtpStatusNewRscv           OCTET STRING, -- new rscv
+     hprRtpStatusOldRscv           OCTET STRING, -- old rscv
+     hprRtpStatusCause             INTEGER,      -- cause
+     hprRtpStatusLastAttemptResult INTEGER       -- result of last
+                                          }
+
+hprRtpStatusLocNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local Network Connection Endpoint (NCE) of this RTP
+          connection.  NCEs identify CPs, LUs, Boundary Functions (BFs),
+          and Route Setup (RS) components."
+      ::= { hprRtpStatusEntry 1 }
+
+hprRtpStatusLocTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "The local TCID of this RTP connection."
+      ::= { hprRtpStatusEntry 2 }
+
+hprRtpStatusIndex OBJECT-TYPE
+      SYNTAX Unsigned32 (1..4294967295)
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Table index.  This value begins at one and is incremented
+          when a new entry is added to the table.  It is an
+          implementation choice whether to run a single counter for
+
+          all entries in the table, or to run a separate counter for
+          the entries for each RTP connection.  In the unlikely event
+          of a wrap, it is assumed that Management Stations will have
+          the ability to order table entries correctly."
+      ::= { hprRtpStatusEntry 3 }
+
+hprRtpStatusStartTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time when the path switch began."
+      ::= { hprRtpStatusEntry 4 }
+
+hprRtpStatusEndTime OBJECT-TYPE
+      SYNTAX DateAndTime
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The time when the path switch was ended, either successfully
+          or unsuccessfully."
+      ::= { hprRtpStatusEntry 5 }
+
+hprRtpStatusRemCpName OBJECT-TYPE
+      SYNTAX SnaControlPointName
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "Administratively assigned network name for the remote node of
+          this RTP connection."
+      ::= { hprRtpStatusEntry 6 }
+
+hprRtpStatusRemNceId OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1..8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The remote Network Connection Endpoint (NCE) of this RTP
+          connection.  NCEs identify CPs, LUs, Boundary Functions (BFs),
+          and Route Setup (RS) components."
+      ::= { hprRtpStatusEntry 7 }
+
+hprRtpStatusRemTcid OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (8))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The remote TCID of this RTP connection."
+      ::= { hprRtpStatusEntry 8 }
+
+hprRtpStatusNewRscv OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..255))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The new Route Selection Control Vector for this RTP
+          connection.  A zero-length string indicates that no value is
+          available, perhaps because the implementation does not save
+          RSCVs."
+      ::= { hprRtpStatusEntry 9 }
+
+hprRtpStatusOldRscv OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (0..255))
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The old Route Selection Control Vector for this RTP
+          connection.  A zero-length string indicates that no value is
+          available, perhaps because the implementation does not save
+          RSCVs."
+      ::= { hprRtpStatusEntry 10 }
+
+hprRtpStatusCause OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),
+                      rtpConnFail(2),
+                      locLinkFail(3),
+                      remLinkFail(4),
+                      operRequest(5)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The reason for the path switch:
+
+               other(1)       - Reason other than those listed below,
+               rtpConnFail(2) - RTP connection failure detected,
+               locLinkFail(3) - Local link failure,
+               remLinkFail(4) - Remote link failure (learned from TDUs),
+               operRequest(5) - Operator requested path switch. "
+      ::= { hprRtpStatusEntry 11 }
+
+hprRtpStatusLastAttemptResult  OBJECT-TYPE
+      SYNTAX INTEGER { successful(1),
+                       initiatorMoving(2),
+                       directorySearchFailed(3),
+                       rscvCalculationFailed(4),
+                       negativeRouteSetupReply(5),
+                       backoutRouteSetupReply(6),
+                       timeoutDuringFirstAttempt(7),
+                       otherUnsuccessful(8)
+                     }
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+          "The result of the last completed path switch attempt.  If the
+          path switch is aborted in the middle of a path switch attempt
+          because the path switch timer expires, the result of the
+          previous path switch attempt is reported.
+
+          The values are defined as follows:
+
+             successful(1)                - The final path switch
+                                            attempt was successful.
+             initiatorMoving(2)           - The final path switch
+                                            attempt failed because the
+                                            initiator is mobile, and
+                                            there was no active link
+                                            out of this node.
+             directorySearchFailed(3)     - The final path switch
+                                            attempt failed because a
+                                            directory search for the
+                                            destination node's CP name
+                                            failed.
+             rscvCalculationFailed(4)     - The final path switch
+                                            attempt failed because an
+                                            RSCV to the node containing
+                                            the remote RTP endpoint
+                                            could not be calculated.
+             negativeRouteSetupReply(5)   - The final path switch
+                                            attempt failed because route
+                                            setup failed for the new
+                                            path.
+             backoutRouteSetupReply(6)    - The final path switch
+                                            attempt failed because the
+
+                                            remote RTP endpoint refused
+                                            to continue the RTP
+                                            connection.
+             timeoutDuringFirstAttempt(7) - The path switch timer
+                                            expired during the first
+                                            path switch attempt.
+             otherUnsuccessful(8)         - The final path switch
+                                            attempt failed for a reason
+                                            other than those listed
+                                            above."
+      ::= { hprRtpStatusEntry 12 }
+
+-- ***************************************************************
+-- Conformance information
+-- ***************************************************************
+
+hprConformance       OBJECT IDENTIFIER ::= { hprMIB 2 }
+
+hprCompliances       OBJECT IDENTIFIER ::= { hprConformance 1 }
+hprGroups            OBJECT IDENTIFIER ::= { hprConformance 2 }
+
+-- Compliance statements
+
+hprCompliance  MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+          "The compliance statement for the SNMPv2 entities that
+          implement the HPR MIB."
+
+      MODULE  -- this module
+
+--    Unconditionally mandatory groups
+          MANDATORY-GROUPS  {
+                             hprGlobalConfGroup,
+                             hprAnrRoutingConfGroup,
+                             hprTransportUserConfGroup
+                            }
+
+--    Conditionally mandatory groups
+          GROUP   hprRtpConfGroup
+          DESCRIPTION
+              "The hprRtpConfGroup is mandatory for HPR implementations
+              supporting the HPR transport tower."
+      ::= { hprCompliances 1 }
+
+-- Units of conformance
+hprGlobalConfGroup OBJECT-GROUP
+        OBJECTS {
+                 hprNodeCpName,
+                 hprOperatorPathSwitchSupport
+                }
+      STATUS  current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation of HPR
+          general information and capabilities."
+      ::= { hprGroups 1 }
+
+hprAnrRoutingConfGroup OBJECT-GROUP
+        OBJECTS {
+                 hprAnrsAssigned,
+                 hprAnrCounterState,
+                 hprAnrCounterStateTime,
+                 hprAnrType,
+                 hprAnrOutTgDest,
+                 hprAnrOutTgNum,
+                 hprAnrPacketsReceived,
+                 hprAnrCounterDisconTime
+                }
+      STATUS  current
+      DESCRIPTION
+          "A collection of objects providing instrumentation for the
+          node's ANR routing."
+      ::= { hprGroups 2 }
+
+hprTransportUserConfGroup OBJECT-GROUP
+        OBJECTS {
+                 hprNceType,
+                 hprNceDefault,
+                 hprNceInstanceId
+                }
+      STATUS  current
+      DESCRIPTION
+          "A collection of objects providing information on the users of
+          the HPR transport known to the node."
+      ::= { hprGroups 3 }
+
+hprRtpConfGroup  OBJECT-GROUP
+        OBJECTS {
+                 hprRtpGlobeConnSetups,
+                 hprRtpGlobeCtrState,
+                 hprRtpGlobeCtrStateTime,
+                 hprRtpRemCpName,
+                 hprRtpRemNceId,
+                 hprRtpRemTcid,
+                 hprRtpPathSwitchTrigger,
+                 hprRtpRscv,
+                 hprRtpTopic,
+                 hprRtpState,
+                 hprRtpUpTime,
+                 hprRtpLivenessTimer,
+                 hprRtpShortReqTimer,
+                 hprRtpPathSwTimer,
+                 hprRtpLivenessTimeouts,
+                 hprRtpShortReqTimeouts,
+                 hprRtpMaxSendRate,
+                 hprRtpMinSendRate,
+                 hprRtpCurSendRate,
+                 hprRtpSmRdTripDelay,
+                 hprRtpSendPackets,
+                 hprRtpRecvPackets,
+                 hprRtpSendBytes,
+                 hprRtpRecvBytes,
+                 hprRtpRetrPackets,
+                 hprRtpPacketsDiscarded,
+                 hprRtpDetectGaps,
+                 hprRtpRateReqSends,
+                 hprRtpOkErrPathSws,
+                 hprRtpBadErrPathSws,
+                 hprRtpOkOpPathSws,
+                 hprRtpBadOpPathSws,
+                 hprRtpCounterDisconTime,
+                 hprRtpStatusStartTime,
+                 hprRtpStatusEndTime,
+                 hprRtpStatusRemNceId,
+                 hprRtpStatusRemTcid,
+                 hprRtpStatusRemCpName,
+                 hprRtpStatusNewRscv,
+                 hprRtpStatusOldRscv,
+                 hprRtpStatusCause,
+                 hprRtpStatusLastAttemptResult
+
+                }
+      STATUS  current
+      DESCRIPTION
+          "A collection of objects providing the instrumentation for RTP
+          connection end points."
+      ::= { hprGroups 4 }
+
+-- end of conformance statement
+
+END
diff --git a/snmp_builder/mibs/IANA-ADDRESS-FAMILY-NUMBERS-MIB.mib b/snmp_builder/mibs/IANA-ADDRESS-FAMILY-NUMBERS-MIB.mib
new file mode 100644
index 0000000..3d88a0f
--- /dev/null
+++ b/snmp_builder/mibs/IANA-ADDRESS-FAMILY-NUMBERS-MIB.mib
@@ -0,0 +1,123 @@
+  IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+      MODULE-IDENTITY,
+      mib-2                               FROM SNMPv2-SMI
+      TEXTUAL-CONVENTION                  FROM SNMPv2-TC;
+
+  ianaAddressFamilyNumbers MODULE-IDENTITY
+      LAST-UPDATED "200203140000Z"  -- March 14, 2002
+      ORGANIZATION "IANA"
+      CONTACT-INFO
+          "Postal:    Internet Assigned Numbers Authority
+                      Internet Corporation for Assigned Names
+		      and Numbers
+                      4676 Admiralty Way, Suite 330
+                      Marina del Rey, CA 90292-6601
+                      USA
+
+          Tel:    +1  310-823-9358
+          E-Mail: iana&iana.org"
+      DESCRIPTION
+          "The MIB module defines the AddressFamilyNumbers
+          textual convention."
+
+      -- revision history
+
+      REVISION     "200203140000Z"  -- March 14, 2002
+      DESCRIPTION  "AddressFamilyNumbers assignment 22 to 
+                   fibreChannelWWPN. AddressFamilyNumbers 
+                   assignment 23 to fibreChannelWWNN.
+                   AddressFamilyNumers assignment 24 to gwid."
+
+      REVISION     "200009080000Z"  -- September 8, 2000
+      DESCRIPTION  "AddressFamilyNumbers assignment 19 to xtpOverIpv4.  
+                   AddressFamilyNumbers assignment 20 to xtpOverIpv6.  
+                   AddressFamilyNumbers assignment 21 to xtpNativeModeXTP."
+
+      REVISION     "200003010000Z"  -- March 1, 2000
+      DESCRIPTION  "AddressFamilyNumbers assignment 17 to distinguishedName. 
+                   AddressFamilyNumbers assignment 18 to asNumber."
+
+      REVISION     "200002040000Z"  -- February 4, 2000
+      DESCRIPTION  "AddressFamilyNumbers assignment 16 to dns."
+
+      REVISION     "9908260000Z"  -- August 26, 1999
+      DESCRIPTION  "Initial version, published as RFC 2677."
+      ::= { mib-2 72 }
+
+  AddressFamilyNumbers ::= TEXTUAL-CONVENTION
+      STATUS       current
+      DESCRIPTION
+          "The definition of this textual convention with the
+          addition of newly assigned values is published
+          periodically by the IANA, in either the Assigned
+          Numbers RFC, or some derivative of it specific to
+          Internet Network Management number assignments.
+          (The latest arrangements can be obtained by
+          contacting the IANA.)
+
+          The enumerations are described as:
+
+          other(0),    -- none of the following
+          ipV4(1),     -- IP Version 4
+          ipV6(2),     -- IP Version 6
+          nsap(3),     -- NSAP
+          hdlc(4),     -- (8-bit multidrop)
+          bbn1822(5),
+          all802(6),   -- (includes all 802 media
+                       --   plus Ethernet 'canonical format')
+          e163(7),
+          e164(8),     -- (SMDS, Frame Relay, ATM)
+          f69(9),      -- (Telex)
+          x121(10),    -- (X.25, Frame Relay)
+          ipx(11),     -- IPX (Internet Protocol Exchange)
+          appleTalk(12),  -- Apple Talk
+          decnetIV(13),   -- DEC Net Phase IV
+          banyanVines(14),  -- Banyan Vines
+          e164withNsap(15),
+                       -- (E.164 with NSAP format subaddress)
+          dns(16),     -- (Domain Name System)
+          distinguishedName(17), -- (Distinguished Name, per X.500)
+          asNumber(18), -- (16-bit quantity, per the AS number space)
+          xtpOverIpv4(19),  -- XTP over IP version 4
+          xtpOverIpv6(20),  -- XTP over IP version 6
+          xtpNativeModeXTP(21),  -- XTP native mode XTP
+          fibreChannelWWPN(22),  -- Fibre Channel World-Wide Port Name 
+          fibreChannelWWNN(23),  -- Fibre Channel World-Wide Node Name
+          gwid(24),    -- Gateway Identifier 
+          afi(25),  -- AFI for L2VPN information
+          reserved(65535)
+
+          Requests for new values should be made to IANA via
+          email (iana&iana.org)."
+      SYNTAX  INTEGER {
+                  other(0),
+                  ipV4(1),
+                  ipV6(2),
+                  nsap(3),
+                  hdlc(4),
+                  bbn1822(5),
+                  all802(6),
+                  e163(7),
+                  e164(8),
+                  f69(9),
+                  x121(10),
+                  ipx(11),
+                  appleTalk(12),
+                  decnetIV(13),
+                  banyanVines(14),
+                  e164withNsap(15),
+                  dns(16),
+                  distinguishedName(17), -- (Distinguished Name, per X.500)
+                  asNumber(18), -- (16-bit quantity, per the AS number space)
+                  xtpOverIpv4(19),
+                  xtpOverIpv6(20),
+                  xtpNativeModeXTP(21),
+                  fibreChannelWWPN(22),
+                  fibreChannelWWNN(23),
+                  gwid(24),
+                  afi(25),
+                  reserved(65535)
+              }
+      END
diff --git a/snmp_builder/mibs/IANA-CHARSET-MIB.mib b/snmp_builder/mibs/IANA-CHARSET-MIB.mib
new file mode 100644
index 0000000..406b1cc
--- /dev/null
+++ b/snmp_builder/mibs/IANA-CHARSET-MIB.mib
@@ -0,0 +1,342 @@
+IANA-CHARSET-MIB DEFINITIONS ::= BEGIN
+--  http://www.iana.org/assignments/ianacharset-mib
+
+IMPORTS
+    MODULE-IDENTITY,
+        mib-2
+            FROM SNMPv2-SMI                              -- [RFC2578]
+    TEXTUAL-CONVENTION
+            FROM SNMPv2-TC;                              -- [RFC2579]
+
+ianaCharsetMIB MODULE-IDENTITY
+    LAST-UPDATED    "200705140000Z"
+    ORGANIZATION    "IANA"
+    CONTACT-INFO    "       Internet Assigned Numbers Authority
+
+                    Postal: ICANN
+                            4676 Admiralty Way, Suite 330
+                            Marina del Rey, CA 90292
+
+                    Tel:    +1 310 823 9358
+                    E-Mail: iana&iana.org"
+    DESCRIPTION     "This MIB module defines the IANACharset
+                    TEXTUAL-CONVENTION.  The IANACharset TC is used to
+                    specify the encoding of string objects defined in
+                    a MIB.
+
+                    Each version of this MIB will be released based on
+                    the IANA Charset Registry file (see RFC 2978) at
+                    http://www.iana.org/assignments/character-sets.
+
+                    Note:  The IANACharset TC, originally defined in
+                    RFC 1759, was inaccurately named CodedCharSet.
+
+                    Note:  Best practice is to define new MIB string
+                    objects with invariant UTF-8 (RFC 3629) syntax
+                    using the SnmpAdminString TC (defined in RFC 3411)
+                    in accordance with IETF Policy on Character Sets and
+                    Languages (RFC 2277).
+
+                    Copyright (C) The Internet Society (2004).  The
+                    initial version of this MIB module was published
+                    in RFC 3808; for full legal notices see the RFC
+                    itself.  Supplementary information may be
+                    available on
+                    http://www.ietf.org/copyrights/ianamib.html."
+
+    --  revision history
+
+    REVISION        "200705140000Z"
+    DESCRIPTION     "Registration of new charset 2107."
+
+    REVISION        "200612070000Z"
+    DESCRIPTION     "Registration of new charsets numbered 118, 119, 
+                    and 2106."
+
+    REVISION        "200406080000Z"
+    DESCRIPTION     "Original version transferred from Printer MIB,
+                    generated from the IANA maintained assignments
+                    http://www.iana.org/assignments/character-sets."
+    ::= { mib-2 106 }
+
+IANACharset ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "Specifies an IANA registered 'charset' - coded character set
+        (CCS) plus optional character encoding scheme (CES) - terms
+        defined in 'IANA Charset Registration Procedures' (RFC 2978).
+
+        Objects of this syntax are used to specify the encoding for
+        string objects defined in one or more MIBs.  For example, the
+        prtLocalizationCharacterSet, prtInterpreterDefaultCharSetIn, and
+        prtInterpreterDefaultCharSetOut objects defined in Printer MIB.
+
+        The current list of 'charset' names and enumerated values
+        is contained in the IANA Character Set Registry at:
+
+           http://www.iana.org/assignments/character-sets
+
+        Enum names are derived from the IANA Charset Registry 'Alias'
+        fields that begin with 'cs' (for character set).
+        Enum values are derived from the parallel 'MIBenum' fields."
+    SYNTAX  INTEGER {
+        other(1),   -- used if the designated
+                    -- character set is not currently
+                    -- registered by IANA
+        unknown(2), -- used as a default value
+        csASCII(3),
+        csISOLatin1(4),
+        csISOLatin2(5),
+        csISOLatin3(6),
+        csISOLatin4(7),
+        csISOLatinCyrillic(8),
+        csISOLatinArabic(9),
+        csISOLatinGreek(10),
+        csISOLatinHebrew(11),
+        csISOLatin5(12),
+        csISOLatin6(13),
+        csISOTextComm(14),
+        csHalfWidthKatakana(15),
+        csJISEncoding(16),
+        csShiftJIS(17),
+        csEUCPkdFmtJapanese(18),
+        csEUCFixWidJapanese(19),
+        csISO4UnitedKingdom(20),
+        csISO11SwedishForNames(21),
+        csISO15Italian(22),
+        csISO17Spanish(23),
+        csISO21German(24),
+        csISO60DanishNorwegian(25),
+        csISO69French(26),
+        csISO10646UTF1(27),
+        csISO646basic1983(28),
+        csINVARIANT(29),
+        csISO2IntlRefVersion(30),
+        csNATSSEFI(31),
+        csNATSSEFIADD(32),
+        csNATSDANO(33),
+        csNATSDANOADD(34),
+        csISO10Swedish(35),
+        csKSC56011987(36),
+        csISO2022KR(37),
+        csEUCKR(38),
+        csISO2022JP(39),
+        csISO2022JP2(40),
+        csISO13JISC6220jp(41),
+        csISO14JISC6220ro(42),
+        csISO16Portuguese(43),
+        csISO18Greek7Old(44),
+        csISO19LatinGreek(45),
+        csISO25French(46),
+        csISO27LatinGreek1(47),
+        csISO5427Cyrillic(48),
+        csISO42JISC62261978(49),
+        csISO47BSViewdata(50),
+        csISO49INIS(51),
+        csISO50INIS8(52),
+        csISO51INISCyrillic(53),
+        csISO54271981(54),
+        csISO5428Greek(55),
+        csISO57GB1988(56),
+        csISO58GB231280(57),
+        csISO61Norwegian2(58),
+        csISO70VideotexSupp1(59),
+        csISO84Portuguese2(60),
+        csISO85Spanish2(61),
+        csISO86Hungarian(62),
+        csISO87JISX0208(63),
+        csISO88Greek7(64),
+        csISO89ASMO449(65),
+        csISO90(66),
+        csISO91JISC62291984a(67),
+        csISO92JISC62991984b(68),
+        csISO93JIS62291984badd(69),
+        csISO94JIS62291984hand(70),
+        csISO95JIS62291984handadd(71),
+        csISO96JISC62291984kana(72),
+        csISO2033(73),
+        csISO99NAPLPS(74),
+        csISO102T617bit(75),
+        csISO103T618bit(76),
+        csISO111ECMACyrillic(77),
+        csa71(78),
+        csa72(79),
+        csISO123CSAZ24341985gr(80),
+        csISO88596E(81),
+        csISO88596I(82),
+        csISO128T101G2(83),
+        csISO88598E(84),
+        csISO88598I(85),
+        csISO139CSN369103(86),
+        csISO141JUSIB1002(87),
+        csISO143IECP271(88),
+        csISO146Serbian(89),
+        csISO147Macedonian(90),
+        csISO150(91),
+        csISO151Cuba(92),
+        csISO6937Add(93),
+        csISO153GOST1976874(94),
+        csISO8859Supp(95),
+        csISO10367Box(96),
+        csISO158Lap(97),
+        csISO159JISX02121990(98),
+        csISO646Danish(99),
+        csUSDK(100),
+        csDKUS(101),
+        csKSC5636(102),
+        csUnicode11UTF7(103),
+        csISO2022CN(104),
+        csISO2022CNEXT(105),
+        csUTF8(106),
+        csISO885913(109),
+        csISO885914(110),
+        csISO885915(111),
+        csISO885916(112),
+        csGBK(113),
+        csGB18030(114),
+        csOSDEBCDICDF0415(115),
+        csOSDEBCDICDF03IRV(116),
+        csOSDEBCDICDF041(117),
+        csISO115481(118),
+        csKZ1048(119),
+        csUnicode(1000),
+        csUCS4(1001),
+        csUnicodeASCII(1002),
+        csUnicodeLatin1(1003),
+        csUnicodeIBM1261(1005),
+        csUnicodeIBM1268(1006),
+        csUnicodeIBM1276(1007),
+        csUnicodeIBM1264(1008),
+        csUnicodeIBM1265(1009),
+        csUnicode11(1010),
+        csSCSU(1011),
+        csUTF7(1012),
+        csUTF16BE(1013),
+        csUTF16LE(1014),
+        csUTF16(1015),
+        csCESU8(1016),
+        csUTF32(1017),
+        csUTF32BE(1018),
+        csUTF32LE(1019),
+        csBOCU1(1020),
+        csWindows30Latin1(2000),
+        csWindows31Latin1(2001),
+        csWindows31Latin2(2002),
+        csWindows31Latin5(2003),
+        csHPRoman8(2004),
+        csAdobeStandardEncoding(2005),
+        csVenturaUS(2006),
+        csVenturaInternational(2007),
+        csDECMCS(2008),
+        csPC850Multilingual(2009),
+        csPCp852(2010),
+        csPC8CodePage437(2011),
+        csPC8DanishNorwegian(2012),
+        csPC862LatinHebrew(2013),
+        csPC8Turkish(2014),
+        csIBMSymbols(2015),
+        csIBMThai(2016),
+        csHPLegal(2017),
+        csHPPiFont(2018),
+        csHPMath8(2019),
+        csHPPSMath(2020),
+        csHPDesktop(2021),
+        csVenturaMath(2022),
+        csMicrosoftPublishing(2023),
+        csWindows31J(2024),
+        csGB2312(2025),
+        csBig5(2026),
+        csMacintosh(2027),
+        csIBM037(2028),
+        csIBM038(2029),
+        csIBM273(2030),
+        csIBM274(2031),
+        csIBM275(2032),
+        csIBM277(2033),
+        csIBM278(2034),
+        csIBM280(2035),
+        csIBM281(2036),
+        csIBM284(2037),
+        csIBM285(2038),
+        csIBM290(2039),
+        csIBM297(2040),
+        csIBM420(2041),
+        csIBM423(2042),
+        csIBM424(2043),
+        csIBM500(2044),
+        csIBM851(2045),
+        csIBM855(2046),
+        csIBM857(2047),
+        csIBM860(2048),
+        csIBM861(2049),
+        csIBM863(2050),
+        csIBM864(2051),
+        csIBM865(2052),
+        csIBM868(2053),
+        csIBM869(2054),
+        csIBM870(2055),
+        csIBM871(2056),
+        csIBM880(2057),
+        csIBM891(2058),
+        csIBM903(2059),
+        csIBBM904(2060),
+        csIBM905(2061),
+        csIBM918(2062),
+        csIBM1026(2063),
+        csIBMEBCDICATDE(2064),
+        csEBCDICATDEA(2065),
+        csEBCDICCAFR(2066),
+        csEBCDICDKNO(2067),
+        csEBCDICDKNOA(2068),
+        csEBCDICFISE(2069),
+        csEBCDICFISEA(2070),
+        csEBCDICFR(2071),
+        csEBCDICIT(2072),
+        csEBCDICPT(2073),
+        csEBCDICES(2074),
+        csEBCDICESA(2075),
+        csEBCDICESS(2076),
+        csEBCDICUK(2077),
+        csEBCDICUS(2078),
+        csUnknown8BiT(2079),
+        csMnemonic(2080),
+        csMnem(2081),
+        csVISCII(2082),
+        csVIQR(2083),
+        csKOI8R(2084),
+        csHZGB2312(2085),
+        csIBM866(2086),
+        csPC775Baltic(2087),
+        csKOI8U(2088),
+        csIBM00858(2089),
+        csIBM00924(2090),
+        csIBM01140(2091),
+        csIBM01141(2092),
+        csIBM01142(2093),
+        csIBM01143(2094),
+        csIBM01144(2095),
+        csIBM01145(2096),
+        csIBM01146(2097),
+        csIBM01147(2098),
+        csIBM01148(2099),
+        csIBM01149(2100),
+        csBig5HKSCS(2101),
+        csIBM1047(2102),
+        csPTCP154(2103),
+        csAmiga1251(2104),
+        csKOI7switched(2105),
+        csBRF(2106),
+        csTSCII(2107),
+        cswindows1250(2250),
+        cswindows1251(2251),
+        cswindows1252(2252),
+        cswindows1253(2253),
+        cswindows1254(2254),
+        cswindows1255(2255),
+        cswindows1256(2256),
+        cswindows1257(2257),
+        cswindows1258(2258),
+        csTIS620(2259),
+        reserved(3000)
+    }
+END
diff --git a/snmp_builder/mibs/IANA-FINISHER-MIB.mib b/snmp_builder/mibs/IANA-FINISHER-MIB.mib
new file mode 100644
index 0000000..8f3c8ac
--- /dev/null
+++ b/snmp_builder/mibs/IANA-FINISHER-MIB.mib
@@ -0,0 +1,283 @@
+IANA-FINISHER-MIB DEFINITIONS ::= BEGIN
+ -- http://www.iana.org/assignments/ianafinisher-mib
+
+IMPORTS
+    MODULE-IDENTITY,
+        mib-2
+            FROM SNMPv2-SMI                              -- [RFC2578]
+    TEXTUAL-CONVENTION
+            FROM SNMPv2-TC;                              -- [RFC2579]
+
+ianafinisherMIB MODULE-IDENTITY
+    LAST-UPDATED  "200911030000Z" -- November 3, 2009
+    ORGANIZATION  "IANA"
+    CONTACT-INFO  "Internet Assigned Numbers Authority
+
+                  Postal: ICANN
+                          4676 Admiralty Way, Suite 330
+                          Marina del Rey, CA 90292
+
+                  Tel:    +1 310 823 9358
+                  E-Mail: iana&iana.org"
+    DESCRIPTION   "This MIB module defines a set of finishing-related
+                  TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806)
+                  and other MIBs which need to specify finishing
+                  mechanism details.
+
+                  Any additions or changes to the contents of this MIB
+                  module require either publication of an RFC, or
+                  Designated Expert Review as defined in RFC 2434,
+                  Guidelines for Writing an IANA Considerations Section
+                  in RFCs.  The Designated Expert will be selected by
+                  the IESG Area Director(s) of the Applications Area.
+
+                  Copyright (C) The Internet Society (2004). The
+
+                  initial version of this MIB module was published
+                  in RFC 3806. For full legal notices see the RFC
+                  itself or see:
+                  http://www.ietf.org/copyrights/ianamib.html"
+
+    REVISION      "200911030000Z" -- November 3, 2009
+    DESCRIPTION   "Added plasticMultiRing(12)."
+
+    REVISION      "200406020000Z"  -- June 2, 2004
+    DESCRIPTION   "Original version, published in coordination
+                  with Finisher MIB (RFC 3806)."
+    ::= { mib-2 110 }
+
+-- TEXTUAL-CONVENTIONs for this MIB module
+
+FinDeviceTypeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "The defined finishing device subunit process
+       enumerations."
+    SYNTAX       INTEGER {
+         other(1),
+         unknown(2),
+         stitcher(3),
+         folder(4),
+         binder(5),
+         trimmer(6),
+         dieCutter(7),
+         puncher(8),
+         perforater(9),
+         slitter(10),
+         separationCutter(11),
+         imprinter(12),
+         wrapper(13),
+         bander(14),
+         makeEnvelope(15),
+         stacker(16),
+         sheetRotator(17),
+         inserter(18)
+        }
+
+FinAttributeTypeTC  ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+        "This TEXTUAL-CONVENTION defines the set of enums for use in
+         the finDeviceAttributeTable.  See section 5.7 for the complete
+         specification of each attribute."
+    SYNTAX       INTEGER {
+         other(1),
+         deviceName(3),
+         deviceVendorName(4),
+         deviceModel(5),
+         deviceVersion(6),
+         deviceSerialNumber(7),
+         maximumSheets(8),
+         finProcessOffsetUnits(9),
+         finReferenceEdge(10),
+         finAxisOffset(11),
+         finJogEdge(12),
+         finHeadLocation(13),
+         finOperationRestrictions(14),
+         finNumberOfPositions(15),
+         namedConfiguration(16),
+         finMediaTypeRestriction(17),
+         finPrinterInputTraySupported(18),
+         finPreviousFinishingOperation(19),
+         finNextFinishingOperation(20),
+         stitchingType(30),
+         stitchingDirection(31),
+         foldingType(40),
+         bindingType(50),
+         punchHoleType(80),
+         punchHoleSizeLongDim(81),
+         punchHoleSizeShortDim(82),
+         punchPattern(83),
+         slittingType(100),
+         wrappingType(130),
+         stackOutputType(160),
+         stackOffset(161),
+         stackRotation(162)
+        }
+
+FinEdgeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "Specifies an edge for a Finishing Process."
+    SYNTAX       INTEGER {
+         topEdge(3),
+         bottomEdge(4),
+         leftEdge(5),
+         rightEdge(6)
+        }
+
+FinStitchingTypeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "The defined stitching type enumerations.  For the edgeStitch and
+       stapleDual enums, the finReferenceEdge attribute is recommended
+
+       to define the edge to which the operation applies."
+    SYNTAX       INTEGER {
+         other(1),         -- More information in other attributes
+         unknown(2),
+         stapleTopLeft(4),
+         stapleBottomLeft(5),
+         stapleTopRight(6),
+         stapleBottomRight(7),
+         saddleStitch(8),
+         edgeStitch(9),
+         stapleDual(10)
+        }
+
+FinStitchingDirTypeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "Defines the direction, relative to the top sheet in the output
+       subunit, that the stitching operation was performed.  For a
+       topDown(3) process, the staple will be clinched on the bottom
+       of the stack.  This parameter can be used to determine what
+       order the pages of a booklet are to be printed such that the
+       staple clinch will be on the inside of the resulting booklet."
+    SYNTAX       INTEGER {
+         unknown(2),
+         topDown(3),
+         bottomUp(4)
+        }
+
+FinStitchingAngleTypeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "This enumeration provides a description of the angular
+       orientation of each stitch in a single or multiple stitching
+       operation, relative to the 'X' axis.  As with all finishing
+       operations, the 'X' axis is always relative to the portrait
+       orientation of the document regardless of the orientation
+       of the printed image.  This enum is primarily applicable to
+       corner stitching operations."
+    SYNTAX       INTEGER {
+         unknown(2),
+         horizontal(3),
+         vertical(4),
+         slanted(5)
+        }
+
+FinFoldingTypeTC ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+     "The defined folding device process enumerations."
+   SYNTAX       INTEGER {
+         other(1),        -- More information in other attributes
+         unknown(2),
+         zFold(3),
+         halfFold(4),
+         letterFold(5)
+        }
+
+FinBindingTypeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "The defined binding type enumerations."
+    SYNTAX       INTEGER {
+         other(1),          -- More information in other attributes
+         unknown(2),
+         tape(4),
+         plastic(5),
+         velo(6),
+         perfect(7),
+         spiral(8),
+         adhesive(9),
+         comb(10),
+         padding(11),
+         plasticMultiRing(12)
+        }
+
+FinPunchHoleTypeTC ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+     "The defined hole type punch process enumerations."
+   SYNTAX       INTEGER {
+         other(1),        -- More information in other attributes
+         unknown(2),
+         round(3),
+         oblong(4),
+         square(5),
+         rectangular(6),
+         star(7)
+        }
+
+FinPunchPatternTC ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+     "The defined hole pattern punch process enumerations."
+   SYNTAX       INTEGER {
+         other(1),           --Pattern to be defined in other attributes
+         unknown(2),
+         twoHoleUSTop(4),    --Letter/legal, 8.5 inch edge
+
+         threeHoleUS(5),     --Letter/ledger, 11 inch edge
+         twoHoleDIN(6),      --A4/A3, 297 mm edge
+         fourHoleDIN(7),     --A4/A3, 297 mm edge
+         twentyTwoHoleUS(8), --Letter/ledger, 11 inch edge
+         nineteenHoleUS(9),  --Letter/ledger, 11 inch edge
+         twoHoleMetric(10),  --B5/B4, 257 mm edge
+         swedish4Hole(11),   --A4/A3, 297 mm edge
+         twoHoleUSSide(12),  --Letter/ledger, 11 inch edge
+         fiveHoleUS(13),     --Letter/ledger, 11 inch edge
+         sevenHoleUS(14),    --Letter/ledger, 11 inch edge
+         mixed7H4S(15),      --A4/A3, 297 mm edge
+         norweg6Hole(16),    --A4/A3, 297 mm edge
+         metric26Hole(17),   --B5/B4, 257 mm edge
+         metric30Hole(18)    --A4/A3, 297 mm edge
+        }
+
+FinSlittingTypeTC ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "The defined slitting type enumerations."
+    SYNTAX       INTEGER {
+         other(1),         -- More information in other attributes
+         unknown(2),
+         slitAndSeparate(4),
+         slitAndMerge(5)
+        }
+
+FinWrappingTypeTC ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+     "The defined wrapping device process enumerations."
+   SYNTAX       INTEGER {
+         other(1),        -- More information in other attributes
+         unknown(2),
+         shrinkWrap(4),
+         paperWrap(5)
+        }
+
+FinStackOutputTypeTC ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+     "The defined stack output type enumerations."
+   SYNTAX       INTEGER {
+         other(1),        -- More information in other attributes
+         unknown(2),
+         straight(4),     -- No offset, one on top of another
+         offset(5),
+         crissCross(6)    -- Rotated
+
+        }
+END
diff --git a/snmp_builder/mibs/IANA-GMPLS-TC-MIB.mib b/snmp_builder/mibs/IANA-GMPLS-TC-MIB.mib
new file mode 100644
index 0000000..5024282
--- /dev/null
+++ b/snmp_builder/mibs/IANA-GMPLS-TC-MIB.mib
@@ -0,0 +1,303 @@
+IANA-GMPLS-TC-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, mib-2              FROM SNMPv2-SMI  -- RFC 2578
+       TEXTUAL-CONVENTION                  FROM SNMPv2-TC;  -- RFC 2579
+
+   ianaGmpls MODULE-IDENTITY
+       LAST-UPDATED
+                  "201004310000Z" -- 13 April 2010
+       ORGANIZATION
+                  "IANA"
+       CONTACT-INFO
+                  "Internet Assigned Numbers Authority
+                   Postal: 4676 Admiralty Way, Suite 330
+                           Marina del Rey, CA 90292
+                   Tel:    +1 310 823 9358
+                   E-Mail: iana&iana.org"
+       DESCRIPTION
+         "Copyright (C) The IETF Trust (2007).  The initial version
+          of this MIB module was published in RFC 4802.  For full legal
+          notices see the RFC itself.  Supplementary information
+          may be available on:
+          http://www.ietf.org/copyrights/ianamib.html"
+
+         REVISION
+           "201004130000Z" -- 13 April 2010
+         DESCRIPTION
+           "Added LSP Encoding Type tunnelLine(14), Switching Type evpl(30)."
+         REVISION
+           "201002220000Z" -- 22 February 2010
+         DESCRIPTION
+           "Added missing Administrative Status Information Flags 25, 26, and 28."
+         REVISION
+           "201002190000Z" -- 19 February 2010
+         DESCRIPTION
+           "Added dcsc(125)."
+         REVISION
+           "200702270000Z" -- 27 February 2007 00:00:00 GMT
+         DESCRIPTION
+           "Initial version issued as part of RFC 4802."
+       ::= { mib-2 152 }
+
+   IANAGmplsLSPEncodingTypeTC ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+            "This type is used to represent and control
+             the LSP encoding type of an LSP signaled by a GMPLS
+             signaling protocol.
+
+             This textual convention is strongly tied to the LSP
+             Encoding Types sub-registry of the GMPLS Signaling
+             Parameters registry managed by IANA.  Values should be
+             assigned by IANA in step with the LSP Encoding Types
+             sub-registry and using the same registry management rules.
+             However, the actual values used in this textual convention
+             are solely within the purview of IANA and do not
+             necessarily match the values in the LSP Encoding Types
+             sub-registry.
+
+             The definition of this textual convention with the
+             addition of newly assigned values is published
+             periodically by the IANA, in either the Assigned
+             Numbers RFC, or some derivative of it specific to
+             Internet Network Management number assignments.  (The
+             latest arrangements can be obtained by contacting the
+             IANA.)
+
+             Requests for new values should be made to IANA via
+             email (iana&iana.org)."
+       REFERENCE
+            "1. Generalized Multi-Protocol Label Switching (GMPLS)
+                Signaling Functional Description, RFC 3471, section
+                3.1.1.
+             2. Generalized MPLS Signalling Extensions for G.709 Optical
+                Transport Networks Control, RFC 4328, section 3.1.1."
+       SYNTAX  INTEGER {
+                  tunnelLspNotGmpls(0),        -- GMPLS is not in use
+                  tunnelLspPacket(1),          -- Packet
+                  tunnelLspEthernet(2),        -- Ethernet
+                  tunnelLspAnsiEtsiPdh(3),     -- PDH
+                  -- the value 4 is deprecated
+                  tunnelLspSdhSonet(5),        -- SDH or SONET
+                  -- the value 6 is deprecated
+                  tunnelLspDigitalWrapper(7),  -- Digital Wrapper
+                  tunnelLspLambda(8),          -- Lambda
+                  tunnelLspFiber(9),           -- Fiber
+                  -- the value 10 is deprecated
+                  tunnelLspFiberChannel(11),   -- Fiber Channel
+
+                  tunnelDigitalPath(12),       -- Digital Path
+                  tunnelOpticalChannel(13),    -- Optical Channel
+                  tunnelLine(14)               -- Line
+                }
+
+   IANAGmplsSwitchingTypeTC ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+            "This type is used to represent and
+             control the LSP switching type of an LSP signaled by a
+             GMPLS signaling protocol.
+
+             This textual convention is strongly tied to the Switching
+             Types sub-registry of the GMPLS Signaling Parameters
+             registry managed by IANA.  Values should be assigned by
+             IANA in step with the Switching Types sub-registry and
+             using the same registry management rules.  However, the
+             actual values used in this textual convention are solely
+             within the purview of IANA and do not necessarily match
+             the values in the Switching Types sub-registry.
+
+             The definition of this textual convention with the
+             addition of newly assigned values is published
+             periodically by the IANA, in either the Assigned
+             Numbers RFC, or some derivative of it specific to
+             Internet Network Management number assignments.  (The
+             latest arrangements can be obtained by contacting the
+             IANA.)
+
+             Requests for new values should be made to IANA via
+             email (iana&iana.org)."
+       REFERENCE
+            "1. Routing Extensions in Support of Generalized
+                Multi-Protocol Label Switching, RFC 4202, section 2.4.
+             2. Generalized Multi-Protocol Label Switching (GMPLS)
+                Signaling Functional Description, RFC 3471, section
+                3.1.1."
+       SYNTAX  INTEGER {
+                  unknown(0),   -- none of the following, or not known
+                  psc1(1),      -- Packet-Switch-Capable 1
+                  psc2(2),      -- Packet-Switch-Capable 2
+                  psc3(3),      -- Packet-Switch-Capable 3
+                  psc4(4),      -- Packet-Switch-Capable 4
+                  evpl(30),     -- Ethernet Virtual Private Line
+                  l2sc(51),     -- Layer-2-Switch-Capable
+                  tdm(100),     -- Time-Division-Multiplex
+                  dcsc(125),    -- Data Channel Switching Capable
+                  lsc(150),     -- Lambda-Switch-Capable
+                  fsc(200)      -- Fiber-Switch-Capable
+                }
+
+   IANAGmplsGeneralizedPidTC ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+            "This data type is used to represent and control the LSP
+             Generalized Protocol Identifier (G-PID) of an LSP
+             signaled by a GMPLS signaling protocol.
+
+             This textual convention is strongly tied to the Generalized
+             PIDs (G-PID) sub-registry of the GMPLS Signaling Parameters
+             registry managed by IANA.  Values should be assigned by
+             IANA in step with the Generalized PIDs (G-PID) sub-registry
+             and using the same registry management rules.  However, the
+             actual values used in this textual convention are solely
+             within the purview of IANA and do not necessarily match the
+             values in the Generalized PIDs (G-PID) sub-registry.
+
+             The definition of this textual convention with the
+             addition of newly assigned values is published
+             periodically by the IANA, in either the Assigned
+             Numbers RFC, or some derivative of it specific to
+             Internet Network Management number assignments.  (The
+             latest arrangements can be obtained by contacting the
+             IANA.)
+
+             Requests for new values should be made to IANA via
+             email (iana&iana.org)."
+        REFERENCE
+            "1. Generalized Multi-Protocol Label Switching (GMPLS)
+                Signaling Functional Description, RFC 3471, section
+                3.1.1.
+             2. Generalized MPLS Signalling Extensions for G.709 Optical
+                Transport Networks Control, RFC 4328, section 3.1.3."
+        SYNTAX  INTEGER {
+                  unknown(0),      -- unknown or none of the following
+                  -- the values 1, 2, 3 and 4 are reserved in RFC 3471
+                  asynchE4(5),
+                  asynchDS3T3(6),
+                  asynchE3(7),
+                  bitsynchE3(8),
+                  bytesynchE3(9),
+                  asynchDS2T2(10),
+                  bitsynchDS2T2(11),
+                  reservedByRFC3471first(12),
+                  asynchE1(13),
+                  bytesynchE1(14),
+                  bytesynch31ByDS0(15),
+                  asynchDS1T1(16),
+                  bitsynchDS1T1(17),
+                  bytesynchDS1T1(18),
+                  vc1vc12(19),
+                  reservedByRFC3471second(20),
+                  reservedByRFC3471third(21),
+                  ds1SFAsynch(22),
+                  ds1ESFAsynch(23),
+                  ds3M23Asynch(24),
+                  ds3CBitParityAsynch(25),
+                  vtLovc(26),
+                  stsSpeHovc(27),
+                  posNoScramble16BitCrc(28),
+                  posNoScramble32BitCrc(29),
+                  posScramble16BitCrc(30),
+                  posScramble32BitCrc(31),
+                  atm(32),
+                  ethernet(33),
+                  sdhSonet(34),
+                  digitalwrapper(36),
+                  lambda(37),
+                  ansiEtsiPdh(38),
+                  lapsSdh(40),
+                  fddi(41),
+                  dqdb(42),
+                  fiberChannel3(43),
+                  hdlc(44),
+                  ethernetV2DixOnly(45),
+                  ethernet802dot3Only(46),
+                  g709ODUj(47),
+                  g709OTUk(48),
+                  g709CBRorCBRa(49),
+                  g709CBRb(50),
+                  g709BSOT(51),
+                  g709BSNT(52),
+                  gfpIPorPPP(53),
+                  gfpEthernetMAC(54),
+                  gfpEthernetPHY(55),
+                  g709ESCON(56),
+                  g709FICON(57),
+                  g709FiberChannel(58)
+                }
+
+   IANAGmplsAdminStatusInformationTC ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "This data type determines the setting of the
+             Admin Status flags in the Admin Status object or TLV, as
+             described in RFC 3471.  Setting this object to a non-zero
+             value will result in the inclusion of the Admin Status
+
+             object or TLV on signaling messages.
+
+             This textual convention is strongly tied to the
+             Administrative Status Information Flags sub-registry of
+             the GMPLS Signaling Parameters registry managed by IANA.
+             Values should be assigned by IANA in step with the
+             Administrative Status Flags sub-registry and using the
+             same registry management rules.  However, the actual
+             values used in this textual convention are solely
+             within the purview of IANA and do not necessarily match
+             the values in the Administrative Status Information
+             Flags sub-registry.
+
+             The definition of this textual convention with the
+             addition of newly assigned values is published
+             periodically by the IANA, in either the Assigned
+             Numbers RFC, or some derivative of it specific to
+             Internet Network Management number assignments.  (The
+             latest arrangements can be obtained by contacting the
+             IANA.)
+
+             Requests for new values should be made to IANA via
+             email (iana&iana.org)."
+        REFERENCE
+            "1. Generalized Multi-Protocol Label Switching (GMPLS)
+                Signaling Functional Description, RFC 3471, section 8.
+             2. Generalized MPLS Signaling - RSVP-TE Extensions,
+                RFC 3473, section 7.
+             3. GMPLS - Communication of Alarm Information,
+                RFC 4783, section 3.2.1."
+        SYNTAX BITS {
+                  reflect(0), -- Reflect bit (RFC 3471)
+                  reserved1(1), -- reserved
+                  reserved2(2), -- reserved
+                  reserved3(3), -- reserved
+                  reserved4(4), -- reserved
+                  reserved5(5), -- reserved
+                  reserved6(6), -- reserved
+                  reserved7(7), -- reserved
+                  reserved8(8), -- reserved
+                  reserved9(9), -- reserved
+                  reserved10(10), -- reserved
+                  reserved11(11), -- reserved
+                  reserved12(12), -- reserved
+                  reserved13(13), -- reserved
+                  reserved14(14), -- reserved
+                  reserved15(15), -- reserved
+                  reserved16(16), -- reserved
+
+                  reserved17(17), -- reserved
+                  reserved18(18), -- reserved
+                  reserved19(19), -- reserved
+                  reserved20(20), -- reserved
+                  reserved21(21), -- reserved
+                  reserved22(22), -- reserved
+                  reserved23(23), -- reserved
+                  reserved24(24), -- reserved
+                  handover(25), -- Handover bit (RFC 5852)
+                  lockout(26), -- Lockout bit (RFC 4872)
+                  inhibitAlarmCommunication(27), -- Inhibit Alarm bit (RFC 4783)
+                  callControl(28), -- Call control bit (RFC 4974)
+                  testing(29), -- Testing bit (RFC 3473)
+                  administrativelyDown(30), -- Admin down (RFC 3473)
+                  deleteInProgress(31) -- Delete bit (RFC 3473)
+                }
+END
diff --git a/snmp_builder/mibs/IANA-IPPM-METRICS-REGISTRY-MIB.mib b/snmp_builder/mibs/IANA-IPPM-METRICS-REGISTRY-MIB.mib
new file mode 100644
index 0000000..af07a6d
--- /dev/null
+++ b/snmp_builder/mibs/IANA-IPPM-METRICS-REGISTRY-MIB.mib
@@ -0,0 +1,863 @@
+IANA-IPPM-METRICS-REGISTRY-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       OBJECT-IDENTITY, MODULE-IDENTITY, mib-2
+           FROM SNMPv2-SMI;
+
+   ianaIppmMetricsRegistry MODULE-IDENTITY
+   LAST-UPDATED "201508140000Z"    -- August 14, 2015
+   ORGANIZATION "IANA"
+   CONTACT-INFO "Internet Assigned Numbers Authority
+
+            Postal: ICANN
+                12025 Waterfront Drive, Suite 300
+                Los Angeles, CA 90094-2536
+
+            Tel:    +1 310-301-5800
+            E-Mail: iana&iana.org"
+
+   DESCRIPTION
+
+      "With the approval and publication of RFC6248, this module is
+      designated Obsolete.
+
+      The registry will no longer be updated, and the current contents will
+      be maintained as-is on the day that RFC6248 was published.
+
+      The original Description text follows below:
+
+      This module defines a registry for IP Performance Metrics.
+
+      Registrations are done sequentially by IANA in the ianaIppmMetrics
+      subtree on the bases of 'Specification Required' as defined in
+      [RFC2434].
+
+      The reference of the specification must point to a stable document
+      including a title, a revision and a date.
+
+      The name always starts with the name of the organization and must
+      respect the SMIv2 rules for descriptors defined in the section 3.1
+      of [RFC2578];
+
+      A document that creates new metrics would have an IANA
+      considerations section in which it would describe new metrics to
+      register.
+
+      An OBJECT IDENTITY assigned to a metric is definitive and cannot
+      be reused.  If a new version of a metric is produced then it is
+      assigned with a new name and a new identifier.
+
+      Copyright (C) The Internet Society (2005).  The initial version of
+      this MIB module was published in RFC 4148; for full legal notices
+      see the RFC itself or see:
+      http://www.ietf.org/copyrights/ianamib.html.  "
+
+    REVISION      "201508140000Z"    -- August 14, 2015
+   DESCRIPTION
+             "Added comments pointing out obsoletion by RFC6248."
+
+    REVISION      "201405220000Z"    -- May 22, 2014
+   DESCRIPTION
+             "Updated contact info."
+
+    REVISION      "201009070000Z"    -- September 7, 2010
+   DESCRIPTION
+             "Added values 71-83 as published in RFC6049."
+
+    REVISION      "200909020000Z"    -- September 2, 2009
+   DESCRIPTION
+             "Added values 52-70 as published in RFC5644."
+
+    REVISION      "200904200000Z"    -- April 20, 2009
+   DESCRIPTION
+          "Added values 46-51 as published in RFC5560."
+
+    REVISION      "200612040000Z"    -- September 27, 2006
+   DESCRIPTION
+       "Added values 34-45 as published in RFC4737."
+
+
+    REVISION      "200504120000Z"    -- April 12th, 2005
+   DESCRIPTION
+       "Initial version of the IPPM metrics registry module.
+        This version published as RFC 4148."
+   ::= { mib-2 128 }  
+
+   ianaIppmMetrics OBJECT-IDENTITY
+       STATUS       current
+       DESCRIPTION
+           "Registration point for IP Performance Metrics."
+       ::= { ianaIppmMetricsRegistry 1 }
+
+     --
+     -- Registry of the metrics of the IPPM WG RFCs
+     --
+
+     --
+     -- RFC 2678 " IPPM Metrics for Measuring Connectivity"
+     -- NOTE: MIB obsoleted by RFC6248
+     --
+
+   ietfInstantUnidirConnectivity OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Instantaneous-Unidirectional-Connectivity"
+       REFERENCE "RFC2678, section 2."
+       ::= { ianaIppmMetrics 1}
+
+   ietfInstantBidirConnectivity OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Instantaneous-Bidirectional-Connectivity"
+       REFERENCE "RFC2678, section 3."
+       ::= { ianaIppmMetrics 2}
+
+   ietfIntervalUnidirConnectivity OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Interval-Unidirectional-Connectivity"
+       REFERENCE "RFC2678, section 4."
+       ::= { ianaIppmMetrics 3 }
+
+   ietfIntervalBidirConnectivity OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+           "Type-P-Interval-Bidirectional-Connectivity"
+       REFERENCE "RFC2678, section 5."
+       ::= { ianaIppmMetrics 4 }
+
+   ietfIntervalTemporalConnectivity OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P1-P2-Interval-Temporal-Connectivity"
+       REFERENCE "RFC2678, section 6."
+       ::= { ianaIppmMetrics 5 }
+
+
+
+
+   --
+   -- RFC 2679 "A One-way Delay Metric for IPPM"
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+
+   ietfOneWayDelay OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay"
+       REFERENCE "RFC2679, section 3."
+       ::= { ianaIppmMetrics 6 }
+
+   ietfOneWayDelayPoissonStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay-Poisson-Stream"
+       REFERENCE "RFC2679, section 4."
+       ::= { ianaIppmMetrics 7 }
+
+   ietfOneWayDelayPercentile OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay-Percentile"
+       REFERENCE "RFC2679, section 5.1."
+       ::= { ianaIppmMetrics 8 }
+
+   ietfOneWayDelayMedian OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay-Median"
+       REFERENCE "RFC2679, section 5.2."
+       ::= { ianaIppmMetrics 9 }
+
+   ietfOneWayDelayMinimum OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay-Minimum"
+       REFERENCE "RFC2679, section 5.3."
+       ::= { ianaIppmMetrics 10 }
+
+   ietfOneWayDelayInversePercentile OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay-Inverse-Percentile"
+       REFERENCE "RFC2679, section 5.4."
+       ::= { ianaIppmMetrics 11 }
+
+   --
+   -- RFC 2680  "One Way Packet Loss Metric for IPPM" 
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+
+   ietfOneWayPktLoss OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Packet-Loss"
+       REFERENCE "RFC2680, section 2."
+       ::= { ianaIppmMetrics 12 }
+
+   ietfOneWayPktLossPoissonStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Packet-Loss-Poisson-Stream"
+       REFERENCE "RFC2680, section 3."
+       ::= { ianaIppmMetrics 13 }
+
+   ietfOneWayPktLossAverage OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Packet-Loss-Average"
+       REFERENCE "RFC2680, section 4."
+       ::= { ianaIppmMetrics 14 }
+
+
+
+
+   --
+   -- RFC2681 "A Round-trip Delay Metric for IPPM" 
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+
+   ietfRoundTripDelay OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Round-trip-Delay"
+       REFERENCE " section 2 of the rfc2681."
+       ::= { ianaIppmMetrics 15 }
+
+   ietfRoundTripDelayPoissonStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Round-trip-Delay-Poisson-Stream"
+       REFERENCE "RFC2681, section 4."
+       ::= { ianaIppmMetrics 16 }
+
+   ietfRoundTripDelayPercentile OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Round-trip-Delay-Percentile"
+       REFERENCE "RFC2681, section 4.1."
+       ::= { ianaIppmMetrics 17 }
+
+   ietfRoundTripDelayMedian OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Round-trip-Delay-Median"
+       REFERENCE "RFC2681, section 4.2."
+       ::= { ianaIppmMetrics 18 }
+
+   ietfRoundTripDelayMinimum OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Round-trip-Delay-Minimum"
+       REFERENCE "RFC2681, section 4.3."
+       ::= { ianaIppmMetrics 19 }
+
+   ietfRoundTripDelayInvPercentile OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-Round-trip-Inverse-Percentile"
+       REFERENCE "RFC2681, section 4.4."
+       ::= { ianaIppmMetrics 20 }
+
+
+
+
+   --
+   -- RFC3357: "One-way Loss Pattern Sample Metrics"
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+
+   ietfOneWayLossDistanceStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-Way-Loss-Distance-Stream"
+       REFERENCE " RFC3357, section 5.4.1."
+       ::={ ianaIppmMetrics 21}
+
+   ietfOneWayLossPeriodStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-Way-Loss-Period-Stream"
+       REFERENCE " RFC3357, section 5.4.2."
+       ::={ ianaIppmMetrics 22}
+
+   ietfOneWayLossNoticeableRate OBJECT-IDENTITY
+
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-Way-Loss-Noticeable-Rate"
+       REFERENCE " RFC3357, section 6.1."
+       ::= { ianaIppmMetrics 23 }
+
+   ietfOneWayLossPeriodTotal OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-Way-Loss-Period-Total"
+       REFERENCE " RFC3357, section 6.2."
+       ::= { ianaIppmMetrics 24 }
+
+   ietfOneWayLossPeriodLengths OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-Way-Loss-Period-Lengths"
+       REFERENCE " RFC3357, section 6.3."
+       ::= { ianaIppmMetrics 25 }
+
+   ietfOneWayInterLossPeriodLengths OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-Way-Inter-Loss-Period-Lengths"
+       REFERENCE " RFC3357, section 6.4."
+       ::= { ianaIppmMetrics 26 }
+
+
+
+
+   --
+   -- RFC3393:
+   -- IP Packet Delay Variation Metric for IP Performance Metrics (IPPM)
+   -- NOTE: MIB obsoleted by RFC6248
+
+   ietfOneWayIpdv OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-ipdv"
+       REFERENCE " RFC3393, section 2."
+       ::= { ianaIppmMetrics 27 }
+
+   ietfOneWayIpdvPoissonStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-ipdv-Poisson-stream"
+       REFERENCE " RFC3393, section 3."
+       ::= { ianaIppmMetrics 28 }
+
+   ietfOneWayIpdvPercentile OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+         "Type-P-One-way-ipdv-percentile"
+       REFERENCE " RFC3393, section 4.3."
+       ::= { ianaIppmMetrics 29 }
+
+   ietfOneWayIpdvInversePercentile OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-ipdv-inverse-percentile"
+       REFERENCE " RFC3393, section 4.4."
+       ::= { ianaIppmMetrics 30 }
+
+   ietfOneWayIpdvJitter OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-ipdv-jitter"
+       REFERENCE " RFC3393, section 4.5."
+       ::= { ianaIppmMetrics 31 }
+
+   ietfOneWayPeakToPeakIpdv OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-peak-to-peak-ipdv"
+       REFERENCE " RFC3393, section 4.6."
+       ::= { ianaIppmMetrics 32 }
+
+
+
+   --
+   -- RFC3432: "Network performance measurement with periodic streams"
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+
+   ietfOneWayDelayPeriodicStream OBJECT-IDENTITY
+       STATUS     current
+       DESCRIPTION
+           "Type-P-One-way-Delay-Periodic-Stream"
+       REFERENCE " RFC3432, section 4."
+       ::= { ianaIppmMetrics 33 }
+
+
+
+   --
+   -- RFC4737 "Packet Reordering Metric for IPPM"
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+
+   ietfReorderedSingleton OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Reordered" 
+       REFERENCE 
+          "Reference RFC4737, section 3" 
+       ::= { ianaIppmMetrics 34 }  
+    
+   ietfReorderedPacketRatio OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Reordered-Ratio-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.1" 
+       ::= { ianaIppmMetrics 35 }  
+    
+   ietfReorderingExtent OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-Extent-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.2" 
+       ::= { ianaIppmMetrics 36 }
+    
+   ietfReorderingLateTimeOffset OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Late-Time-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.3" 
+       ::= { ianaIppmMetrics 37 } 
+    
+   ietfReorderingByteOffset OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Byte-Offset-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.4" 
+       ::= { ianaIppmMetrics 38 } 
+    
+   ietfReorderingGap OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-Gap-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.5" 
+       ::= { ianaIppmMetrics 39 } 
+    
+   ietfReorderingGapTime OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-GapTime-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.5" 
+       ::= { ianaIppmMetrics 40 } 
+    
+   ietfReorderingFreeRunx OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-Free-Run-x-numruns-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.6" 
+       ::= { ianaIppmMetrics 41 }
+    
+   ietfReorderingFreeRunq OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-Free-Run-q-squruns-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.6" 
+       ::= { ianaIppmMetrics 42 } 
+    
+   ietfReorderingFreeRunp OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-Free-Run-p-numpkts-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.6" 
+       ::= { ianaIppmMetrics 43 } 
+    
+   ietfReorderingFreeRuna OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-Reordering-Free-Run-a-accpkts-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 4.6" 
+       ::= { ianaIppmMetrics 44 } 
+       
+   ietfnReordering OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-Packet-n-Reordering-Stream" 
+       REFERENCE 
+          "Reference RFC4737, section 5" 
+       ::= { ianaIppmMetrics 45 } 
+
+
+
+   --
+   -- RFC5560:
+   -- A One-Way Packet Duplication Metric
+   -- NOTE: MIB obsoleted by RFC6248
+   
+   ietfOneWayPacketArrivalCount OBJECT-IDENTITY 
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-one-way-packet-arrival-count" 
+       REFERENCE 
+          "Reference RFC5560, section 2" 
+       ::= { ianaIppmMetrics 46 }
+
+   ietfOneWayPacketDuplication OBJECT-IDENTITY
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-one-way-packet-duplication" 
+       REFERENCE 
+          "Reference RFC5560, section 3" 
+       ::= { ianaIppmMetrics 47 }
+
+   ietfOneWayPacketDuplicationPoissonStream OBJECT-IDENTITY
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-one-way-Packet-Duplication-Poisson-Stream"
+       REFERENCE 
+          "Reference RFC5560, section 4.1" 
+       ::= { ianaIppmMetrics 48 }
+
+   ietfOneWayPacketDuplicationPeriodicStream OBJECT-IDENTITY
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-one-way-Duplication-Periodic-Stream"
+       REFERENCE 
+          "Reference RFC5560, section 4.2" 
+       ::= { ianaIppmMetrics 49 }
+
+   ietfOneWayPacketDuplicationFraction OBJECT-IDENTITY
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-one-way-packet-duplication-fraction"
+       REFERENCE 
+          "Reference RFC5560, section 5.1" 
+       ::= { ianaIppmMetrics 50 }
+
+   ietfOneWayReplicatedPacketRate OBJECT-IDENTITY
+       STATUS       current 
+       DESCRIPTION 
+          "Type-P-one-way-replicated-packet-rate"
+       REFERENCE 
+          "Reference RFC5560, section 5.2" 
+       ::= { ianaIppmMetrics 51 }
+
+
+
+       --
+       -- RFC5644:
+       -- IP Performance Metrics (IPPM) for spatial and multicast
+       -- NOTE: MIB obsoleted by RFC6248
+   
+   ietfSpatialOneWayDelayVector OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Spatial-One-way-Delay-Vector"
+       REFERENCE
+          "Reference RFC5644, section 5.1."
+       ::= { ianaIppmMetrics 52 }
+
+   ietfSpatialPacketLossVector OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Spatial-Packet-Loss-Vector"
+       REFERENCE
+          "Reference RFC5644, section 5.2."
+       ::= { ianaIppmMetrics 53 } 
+
+   ietfSpatialOneWayIpdvVector OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Spatial-One-way-ipdv-Vector"
+       REFERENCE
+          "Reference RFC5644, section 5.3."
+       ::= { ianaIppmMetrics 54 }
+      
+   ietfSegmentOneWayDelayStream OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Segment-One-way-Delay-Stream"
+       REFERENCE
+          "Reference RFC5644, section 6.1."
+       ::= { ianaIppmMetrics 55 } 
+
+   ietfSegmentPacketLossStream OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Segment-Packet-Loss-Stream"
+       REFERENCE
+          "Reference RFC5644, section 6.2."
+       ::= { ianaIppmMetrics 56 }
+
+   ietfSegmentIpdvPrevStream OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Segment-ipdv-prev-Stream"
+       REFERENCE
+          "Reference RFC5644, section 6.3."
+       ::= { ianaIppmMetrics 57 } 
+
+   ietfSegmentIpdvMinStream OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-Segment-ipdv-min-Stream"
+       REFERENCE
+          "Reference RFC5644, section 6.4."
+       ::= { ianaIppmMetrics 58 }
+
+   -- One-to-group metrics
+
+   ietfOneToGroupDelayVector OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Delay-Vector"
+       REFERENCE
+          "Reference RFC5644, section 7.1."
+       ::= { ianaIppmMetrics 59 }
+   
+   ietfOneToGroupPacketLossVector OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Packet-Loss-Vector"
+       REFERENCE
+          "Reference RFC5644, section 7.2."
+       ::= { ianaIppmMetrics 60 } 
+   
+   ietfOneToGroupIpdvVector OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-ipdv-Vector"
+       REFERENCE
+          "Reference RFC5644, section 7.3."
+       ::= { ianaIppmMetrics 61 } 
+
+   -- One to group statistics
+
+   --
+
+   ietfOnetoGroupReceiverNMeanDelay OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Receiver-n-Mean-Delay"
+       REFERENCE
+          "Reference RFC5644, section 8.3.1."
+       ::= { ianaIppmMetrics 62 } 
+
+   ietfOneToGroupMeanDelay OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Mean-Delay"
+       REFERENCE
+       "Reference RFC5644, section 8.3.2."
+       ::= { ianaIppmMetrics 63 } 
+
+   ietfOneToGroupRangeMeanDelay OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Range-Mean-Delay"
+       REFERENCE
+          "Reference RFC5644, section 8.3.3."
+       ::= { ianaIppmMetrics 64 } 
+   
+   ietfOneToGroupMaxMeanDelay OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Max-Mean-Delay"
+       REFERENCE
+          "Reference RFC5644, section 8.3.4."
+       ::= { ianaIppmMetrics 65 } 
+
+   ietfOneToGroupReceiverNLossRatio OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Receiver-n-Loss-Ratio"
+       REFERENCE
+          "Reference RFC5644, section 8.4.1."
+       ::= { ianaIppmMetrics 66 }
+   --
+
+   ietfOneToGroupReceiverNCompLossRatio OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Receiver-n-Comp-Loss-Ratio"
+       REFERENCE
+          "Reference RFC5644, section 8.4.2."
+       ::= { ianaIppmMetrics 67 } 
+   
+   ietfOneToGroupLossRatio OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Loss-Ratio"
+       REFERENCE
+          "Reference RFC5644, section 8.4.3."
+       ::= { ianaIppmMetrics 68 } 
+   --
+
+   ietfOneToGroupRangeLossRatio OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Range-Loss-Ratio"
+       REFERENCE
+          "Reference RFC5644, section 8.4.4."
+       ::= { ianaIppmMetrics 69 } 
+
+   ietfOneToGroupRangeDelayVariation OBJECT-IDENTITY
+       STATUS current
+       DESCRIPTION
+          "Type-P-One-to-group-Range-Delay-Variation"
+       REFERENCE
+          "Reference RFC5644, section 8.5.1."
+       ::= { ianaIppmMetrics 70 } 
+
+   --
+   -- RFC6049, "Spatial Composition of Metrics"
+   -- NOTE: MIB obsoleted by RFC6248
+   --
+   -- Copyright (c) 2010 IETF Trust and the persons identified as
+   -- authors of the code. All rights reserved.
+   --
+   -- Redistribution and use in source and binary forms, with or
+   -- without modification, are permitted provided that the following
+   -- conditions are met:
+   -- * Redistributions of source code must retain the above copyright
+   --   notice, this list of conditions and the following disclaimer.
+   -- * Redistributions in binary form must reproduce the above
+   --   copyright notice, this list of conditions and the following
+   --   disclaimer in the documentation and/or other materials provided
+   --   with the distribution.
+   -- * Neither the name of Internet Society, IETF or IETF Trust, nor
+   --   the names of specific contributors, may be used to endorse or
+   --   promote products derived from this software without specific
+   --   prior written permission.
+   --
+   -- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+   -- CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+   -- INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+   -- MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+   -- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+   -- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   -- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+   -- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+   -- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   -- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   -- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+   -- OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+   -- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+   --
+        
+   ietfFiniteOneWayDelayStream OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Finite-One-way-Delay-Stream"
+      REFERENCE
+         "Reference RFC6049, section 4.1."
+      ::= { ianaIppmMetrics 71 }
+
+
+   ietfFiniteOneWayDelayMean OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Finite-One-way-Delay-Mean"
+      REFERENCE
+         "Reference RFC6049, section 4.2.2."
+      ::= { ianaIppmMetrics 72 }
+
+
+
+   ietfCompositeOneWayDelayMean OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Finite-Composite-One-way-Delay-Mean"
+      REFERENCE
+         "Reference RFC6049, section 4.2.5."
+      ::= { ianaIppmMetrics 73 } 
+
+
+
+   ietfFiniteOneWayDelayMinimum OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Finite-One-way-Delay-Minimum"
+      REFERENCE
+         "Reference RFC6049, section 4.3.2."
+      ::= { ianaIppmMetrics 74 } 
+
+
+
+   ietfCompositeOneWayDelayMinimum OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Finite-Composite-One-way-Delay-Minimum"
+      REFERENCE
+         "Reference RFC6049, section 4.3.5."
+      ::= { ianaIppmMetrics 75 } 
+
+
+   ietfOneWayPktLossEmpiricProb OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-One-way-Packet-Loss-Empirical-Probability"
+      REFERENCE
+         "Reference RFC6049, section 5.1.4"
+      ::= { ianaIppmMetrics 76 } 
+
+
+   ietfCompositeOneWayPktLossEmpiricProb OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Composite-One-way-Packet-Loss-Empirical-Probability"
+      REFERENCE
+         "Reference RFC6049, section 5.1.5."
+      ::= { ianaIppmMetrics 77 }
+
+
+
+   ietfOneWayPdvRefminStream OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-One-way-pdv-refmin-Stream"
+      REFERENCE
+         "Reference RFC6049, section 6.1."
+      ::= { ianaIppmMetrics 78 }
+
+
+   ietfOneWayPdvRefminMean OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-One-way-pdv-refmin-Mean"
+      REFERENCE
+         "Reference RFC6049, section 6.1.4."
+      ::= { ianaIppmMetrics 79 } 
+
+
+   ietfOneWayPdvRefminVariance OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-One-way-pdv-refmin-Variance"
+      REFERENCE
+         "Reference RFC6049, section 6.1.4."
+      ::= { ianaIppmMetrics 80 } 
+
+
+
+   ietfOneWayPdvRefminSkewness OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-One-way-pdv-refmin-Skewness"
+      REFERENCE
+         "Reference RFC6049, section 6.1.4."
+      ::= { ianaIppmMetrics 81 } 
+
+
+
+   ietfCompositeOneWayPdvRefminQtil OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-Composite-One-way-pdv-refmin-quantile-a"
+      REFERENCE
+         "Reference RFC6049, section 6.1.5.1."
+      ::= { ianaIppmMetrics 82 }
+
+
+   
+   ietfCompositeOneWayPdvRefminNPA OBJECT-IDENTITY
+      STATUS current
+      DESCRIPTION
+         "Type-P-One-way-Composite-pdv-refmin-NPA"
+      REFERENCE
+         "Reference RFC6049, section 6.1.5.2."
+      ::= { ianaIppmMetrics 83 } 
+
+
+
+   END
\ No newline at end of file
diff --git a/snmp_builder/mibs/IANA-ITU-ALARM-TC-MIB.mib b/snmp_builder/mibs/IANA-ITU-ALARM-TC-MIB.mib
new file mode 100644
index 0000000..a3d728e
--- /dev/null
+++ b/snmp_builder/mibs/IANA-ITU-ALARM-TC-MIB.mib
@@ -0,0 +1,330 @@
+IANA-ITU-ALARM-TC-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+      MODULE-IDENTITY, mib-2       FROM SNMPv2-SMI
+      TEXTUAL-CONVENTION           FROM SNMPv2-TC;
+
+    ianaItuAlarmNumbers MODULE-IDENTITY
+        LAST-UPDATED "200409090000Z"  -- September 09, 2004
+        ORGANIZATION "IANA"
+        CONTACT-INFO
+            "Postal:    Internet Assigned Numbers Authority
+                        Internet Corporation for Assigned Names
+                        and Numbers
+                        4676 Admiralty Way, Suite 330
+                        Marina del Rey, CA 90292-6601
+                        USA
+
+            Tel:    +1  310-823-9358
+            E-Mail: iana&iana.org"
+        DESCRIPTION
+            "The MIB module defines the ITU Alarm
+            textual convention for objects expected to require
+            regular extension.
+
+            Copyright (C) The Internet Society (2004).  The
+            initial version of this MIB module was published
+            in RFC 3877. For full legal notices see the RFC
+            itself. Supplementary information may be available on:
+                 http://www.ietf.org/copyrights/ianamib.html"
+         REVISION    "200409090000Z"
+         DESCRIPTION
+             "Initial version, published as RFC 3877."
+        ::= { mib-2 119 } 
+
+   IANAItuProbableCause ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+           "ITU-T probable cause values. Duplicate values defined in
+            X.733 are appended with X733 to ensure syntactic uniqueness.
+            Probable cause value 0 is reserved for special purposes.
+
+            The Internet Assigned Number Authority (IANA) is responsible
+            for the assignment of the enumerations in this TC.
+            IANAItuProbableCause value of 0 is reserved for special
+            purposes and MUST NOT be assigned.
+
+            Values of IANAItuProbableCause in the range 1 to 1023 are
+            reserved for causes that correspond to ITU-T probable cause.
+
+            All other requests for new causes will be handled on a
+            first-come, first served basis and will be assigned
+            enumeration values starting with 1025.
+
+            Request should  come in the form of well-formed
+            SMI [RFC2578] for enumeration names that are unique and
+            sufficiently descriptive.
+
+            While some effort will be taken to ensure that new probable
+            causes do not conceptually duplicate existing probable
+            causes it is acknowledged that the existence of conceptual
+            duplicates in the starting probable cause list is an known
+            industry reality.
+
+            To aid IANA in the administration of probable cause names
+            and values, the OPS Area Director will appoint one or more
+            experts to help review requests.
+
+            See http://www.iana.org"
+       REFERENCE
+           "ITU Recommendation M.3100, 'Generic Network Information
+               Model', 1995
+            ITU Recommendation X.733, 'Information Technology - Open
+               Systems Interconnection - System Management: Alarm
+               Reporting Function', 1992
+            ITU Recommendation X.736, 'Information Technology - Open
+               Systems Interconnection - System Management: Security
+               Alarm Reporting Function', 1992"
+       SYNTAX         INTEGER
+               {
+               -- The following probable causes were defined in M.3100
+                aIS  (1),
+                callSetUpFailure  (2),
+                degradedSignal  (3),
+                farEndReceiverFailure  (4),
+                framingError  (5),
+                lossOfFrame (6),
+                lossOfPointer  (7),
+                lossOfSignal  (8),
+                payloadTypeMismatch (9),
+                transmissionError (10),
+                remoteAlarmInterface (11),
+                excessiveBER  (12),
+                pathTraceMismatch  (13),
+                unavailable  (14),
+                signalLabelMismatch (15),
+                lossOfMultiFrame (16),
+                receiveFailure (17),
+                transmitFailure (18),
+                modulationFailure (19),
+                demodulationFailure (20),
+                broadcastChannelFailure (21),
+                connectionEstablishmentError (22),
+                invalidMessageReceived (23),
+                localNodeTransmissionError (24),
+                remoteNodeTransmissionError (25),
+                routingFailure (26),
+    --Values 27-50 are reserved for communications alarm related
+    --probable causes
+    -- The following are used with equipment alarm.
+                backplaneFailure (51),
+                dataSetProblem  (52),
+                equipmentIdentifierDuplication  (53),
+                externalIFDeviceProblem  (54),
+                lineCardProblem (55),
+                multiplexerProblem  (56),
+                nEIdentifierDuplication  (57),
+                powerProblem  (58),
+                processorProblem  (59),
+                protectionPathFailure  (60),
+                receiverFailure  (61),
+                replaceableUnitMissing  (62),
+                replaceableUnitTypeMismatch (63),
+                synchronizationSourceMismatch  (64),
+                terminalProblem   (65),
+                timingProblem   (66),
+                transmitterFailure  (67),
+                trunkCardProblem  (68),
+                replaceableUnitProblem  (69),
+                realTimeClockFailure (70),
+    --An equipment alarm to be issued if the system detects that the
+    --real time clock has failed
+                antennaFailure (71),
+                batteryChargingFailure (72),
+                diskFailure (73),
+                frequencyHoppingFailure (74),
+                iODeviceError (75),
+                lossOfSynchronisation (76),
+                lossOfRedundancy (77),
+                powerSupplyFailure (78),
+                signalQualityEvaluationFailure (79),
+                tranceiverFailure (80),
+                protectionMechanismFailure (81),
+                protectingResourceFailure (82),
+    -- Values 83-100 are reserved for equipment alarm related probable
+    -- causes
+    -- The following are used with environmental alarm.
+                airCompressorFailure  (101),
+                airConditioningFailure  (102),
+                airDryerFailure   (103),
+                batteryDischarging  (104),
+                batteryFailure   (105),
+                commercialPowerFailure  (106),
+                coolingFanFailure  (107),
+                engineFailure  (108),
+                fireDetectorFailure  (109),
+                fuseFailure  (110),
+                generatorFailure  (111),
+                lowBatteryThreshold (112),
+                pumpFailure  (113),
+                rectifierFailure  (114),
+                rectifierHighVoltage  (115),
+                rectifierLowFVoltage  (116),
+                ventilationsSystemFailure  (117),
+                enclosureDoorOpen  (118),
+                explosiveGas  (119),
+                fire (120),
+                flood   (121),
+                highHumidity  (122),
+                highTemperature  (123),
+                highWind  (124),
+                iceBuildUp  (125),
+                intrusionDetection  (126),
+                lowFuel  (127),
+                lowHumidity  (128),
+                lowCablePressure  (129),
+                lowTemperatue  (130),
+                lowWater  (131),
+                smoke  (132),
+                toxicGas  (133),
+                coolingSystemFailure (134),
+                externalEquipmentFailure (135),
+                externalPointFailure (136),
+    -- Values 137-150 are reserved for environmental alarm related
+    -- probable causes
+    -- The following are used with Processing error alarm.
+                storageCapacityProblem (151),
+                memoryMismatch  (152),
+                corruptData  (153),
+                outOfCPUCycles   (154),
+                sfwrEnvironmentProblem  (155),
+                sfwrDownloadFailure  (156),
+                lossOfRealTimel (157),
+    --A processing error alarm to be issued after the system has
+    --reinitialised. This will indicate
+    --to the management systems that the view they have of the managed
+    --system may no longer
+    --be valid. Usage example: The managed
+    --system issues this alarm after a reinitialization with severity
+    --warning to inform the
+    --management system about the event. No clearing notification will
+    --be sent.
+                applicationSubsystemFailure (158),
+                configurationOrCustomisationError (159),
+                databaseInconsistency (160),
+                fileError (161),
+                outOfMemory (162),
+                softwareError (163),
+                timeoutExpired (164),
+                underlayingResourceUnavailable (165),
+                versionMismatch (166),
+    --Values 168-200 are reserved for processing error alarm related
+    -- probable causes.
+                bandwidthReduced (201),
+                congestion (202),
+                excessiveErrorRate (203),
+                excessiveResponseTime (204),
+                excessiveRetransmissionRate (205),
+                reducedLoggingCapability (206),
+                systemResourcesOverload (207 ),
+                -- The following were defined X.733
+                adapterError (500),
+                applicationSubsystemFailture (501),
+                bandwidthReducedX733 (502),
+                callEstablishmentError (503),
+                communicationsProtocolError (504),
+                communicationsSubsystemFailure (505),
+                configurationOrCustomizationError (506),
+                congestionX733 (507),
+                coruptData (508),
+                cpuCyclesLimitExceeded (509),
+                dataSetOrModemError (510),
+                degradedSignalX733 (511),
+                dteDceInterfaceError (512),
+                enclosureDoorOpenX733 (513),
+                equipmentMalfunction (514),
+                excessiveVibration (515),
+                fileErrorX733 (516),
+                fireDetected (517),
+                framingErrorX733 (518),
+                heatingVentCoolingSystemProblem (519),
+                humidityUnacceptable (520),
+                inputOutputDeviceError (521),
+                inputDeviceError (522),
+                lanError (523),
+                leakDetected (524),
+                localNodeTransmissionErrorX733 (525),
+                lossOfFrameX733 (526),
+                lossOfSignalX733 (527),
+                materialSupplyExhausted (528),
+                multiplexerProblemX733 (529),
+                outOfMemoryX733 (530),
+                ouputDeviceError (531),
+                performanceDegraded (532),
+                powerProblems (533),
+                pressureUnacceptable (534),
+                processorProblems (535),
+                pumpFailureX733 (536),
+                queueSizeExceeded (537),
+                receiveFailureX733 (538),
+                receiverFailureX733 (539),
+                remoteNodeTransmissionErrorX733 (540),
+                resourceAtOrNearingCapacity (541),
+                responseTimeExecessive (542),
+                retransmissionRateExcessive (543),
+                softwareErrorX733 (544),
+                softwareProgramAbnormallyTerminated (545),
+                softwareProgramError (546),
+                storageCapacityProblemX733 (547),
+                temperatureUnacceptable (548),
+                thresholdCrossed (549),
+                timingProblemX733 (550),
+                toxicLeakDetected (551),
+                transmitFailureX733 (552),
+                transmiterFailure (553),
+                underlyingResourceUnavailable (554),
+                versionMismatchX733 (555),
+                -- The following are defined in X.736
+                authenticationFailure (600),
+                breachOfConfidentiality (601),
+                cableTamper (602),
+                delayedInformation (603),
+                denialOfService (604),
+                duplicateInformation (605),
+                informationMissing (606),
+                informationModificationDetected (607),
+                informationOutOfSequence (608),
+                keyExpired (609),
+                nonRepudiationFailure (610),
+                outOfHoursActivity (611),
+                outOfService (612),
+                proceduralError (613),
+                unauthorizedAccessAttempt (614),
+                unexpectedInformation (615),
+                other (1024)
+                }
+
+   IANAItuEventType ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+               "The ITU event Type values.
+
+               The Internet Assigned Number Authority (IANA) is
+               responsible for the assignment of the enumerations
+               in this TC.
+
+               Request should  come in the form of well-formed
+               SMI [RFC2578] for enumeration names that are unique
+               and sufficiently descriptive.
+
+               See http://www.iana.org "
+       REFERENCE
+              "ITU Recommendation X.736, 'Information Technology - Open
+               Systems Interconnection - System Management: Security
+               Alarm Reporting Function', 1992"
+       SYNTAX         INTEGER
+              {
+              other (1),
+              communicationsAlarm (2),
+              qualityOfServiceAlarm (3),
+              processingErrorAlarm (4),
+              equipmentAlarm (5),
+              environmentalAlarm (6),
+              integrityViolation (7),
+              operationalViolation (8),
+              physicalViolation (9),
+              securityServiceOrMechanismViolation (10),
+              timeDomainViolation (11)
+              }
+
+   END
diff --git a/snmp_builder/mibs/IANA-LANGUAGE-MIB.mib b/snmp_builder/mibs/IANA-LANGUAGE-MIB.mib
new file mode 100644
index 0000000..773c101
--- /dev/null
+++ b/snmp_builder/mibs/IANA-LANGUAGE-MIB.mib
@@ -0,0 +1,123 @@
+IANA-LANGUAGE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, mib-2
+        FROM SNMPv2-SMI;
+
+ianaLanguages MODULE-IDENTITY
+    LAST-UPDATED "200005100000Z"  -- May 10, 2000
+    ORGANIZATION "IANA"
+    CONTACT-INFO
+        "Internet Assigned Numbers Authority (IANA)
+
+         Postal: ICANN
+                 4676 Admiralty Way, Suite 330
+                 Marina del Rey, CA 90292
+
+         Tel:    +1 310 823 9358 x20
+         E-Mail: iana&iana.org"
+    DESCRIPTION
+        "The MIB module registers object identifier values for
+         well-known programming and scripting languages. Every
+         language registration MUST describe the format used
+         when transferring scripts written in this language.
+
+         Any additions or changes to the contents of this MIB
+         module require Designated Expert Review as defined in
+         the Guidelines for Writing IANA Considerations Section
+         document. The Designated Expert will be selected by
+         the IESG Area Director of the OPS Area.
+
+         Note, this module does not have to register all possible
+         languages since languages are identified by object
+         identifier values. It is therefore possible to registered 
+         languages in private OID trees. The references given below are not
+         normative with regard to the language version. Other
+         references might be better suited to describe some newer 
+         versions of this language. The references are only
+         provided as `a pointer into the right direction'."
+
+ -- Revision log, in reverse chronological order
+
+    REVISION    "200005100000Z" -- May 10, 2000
+    DESCRIPTION "Import mib-2 instead of experimental, so that
+                 this module compiles"
+
+    REVISION    "199909090900Z" -- September 9, 1999
+    DESCRIPTION "Initial version as published at time of
+                 publication of RFC 2591."
+    ::= { mib-2 73 }
+
+ianaLangJavaByteCode OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "Java byte code to be processed by a Java virtual machine.
+         A script written in Java byte code is transferred by using
+         the Java archive file format (JAR)."
+    REFERENCE
+        "The Java Virtual Machine Specification.
+         ISBN 0-201-63452-X"
+    ::= { ianaLanguages 1 }
+
+ianaLangTcl OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The Tool Command Language (Tcl). A script written in the
+         Tcl language is transferred in Tcl source code format."
+    REFERENCE
+        "Tcl and the Tk Toolkit.
+         ISBN 0-201-63337-X"
+    ::= { ianaLanguages 2 }
+
+ianaLangPerl OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The Perl language. A script written in the Perl language
+         is transferred in Perl source code format."
+    REFERENCE
+        "Programming Perl.
+         ISBN 1-56592-149-6"
+    ::= { ianaLanguages 3 }
+
+ianaLangScheme OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The Scheme language. A script written in the Scheme
+         language is transferred in Scheme source code format."
+    REFERENCE
+        "The Revised^4 Report on the Algorithmic Language Scheme.
+         MIT Press"
+    ::= { ianaLanguages 4 }
+
+ianaLangSRSL OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The SNMP Script Language defined by SNMP Research. A
+         script written in the SNMP Script Language is transferred
+         in the SNMP Script Language source code format."
+    ::= { ianaLanguages 5 }
+
+ianaLangPSL OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The Patrol Script Language defined by BMC Software. A script
+         written in the Patrol Script Language is transferred in the
+         Patrol Script Language source code format."
+    REFERENCE
+        "PATROL Script Language Reference Manual, Version 3.0,
+         November 30, 1995. BMC Software, Inc. 2101 City West Blvd.,
+         Houston, Texas 77042."
+    ::= { ianaLanguages 6 }
+
+ianaLangSMSL OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The Systems Management Scripting Language. A script written
+         in the SMSL language is transferred in the SMSL source code
+         format."
+    REFERENCE
+        "ISO/ITU Command Sequencer.
+         ISO 10164-21 or ITU X.753"
+    ::= { ianaLanguages 7 }
+
+END
diff --git a/snmp_builder/mibs/IANA-MALLOC-MIB.mib b/snmp_builder/mibs/IANA-MALLOC-MIB.mib
new file mode 100644
index 0000000..10c0a8c
--- /dev/null
+++ b/snmp_builder/mibs/IANA-MALLOC-MIB.mib
@@ -0,0 +1,65 @@
+IANA-MALLOC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2           FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION               FROM SNMPv2-TC;
+
+ianaMallocMIB MODULE-IDENTITY
+    LAST-UPDATED "200301271200Z" -- January 27, 2003
+    ORGANIZATION "IANA"
+    CONTACT-INFO
+            " Internet Assigned Numbers Authority
+              Internet Corporation for Assigned Names and Numbers
+              4676 Admiralty Way, Suite 330
+              Marina del Rey, CA 90292-6601
+
+              Phone: +1 310 823 9358
+              EMail: iana&iana.org"
+    DESCRIPTION
+            "This MIB module defines the IANAscopeSource and
+            IANAmallocRangeSource textual conventions for use in MIBs
+            which need to identify ways of learning multicast scope and
+            range information.
+
+            Any additions or changes to the contents of this MIB module
+            require either publication of an RFC, or Designated Expert
+            Review as defined in the Guidelines for Writing IANA
+            Considerations Section document.  The Designated Expert will
+            be selected by the IESG Area Director(s) of the Transport
+            Area."
+
+    -- revision log
+
+    REVISION     "200301271200Z" -- January 27, 2003
+    DESCRIPTION
+            "Initial version."
+    ::= { mib-2 102 } 
+
+IANAscopeSource ::= TEXTUAL-CONVENTION
+   STATUS  current
+   DESCRIPTION
+            "The source of multicast scope information."
+   SYNTAX  INTEGER {
+              other(1),  -- none of the following
+              manual(2), -- statically configured
+              local(3),  -- automatically added by the system,
+                         -- such as a Source-Specific Multicast
+                         -- scope
+              mzap(4),   -- MZAP
+              madcap(5)  -- MADCAP
+           }
+
+IANAmallocRangeSource ::= TEXTUAL-CONVENTION
+   STATUS  current
+   DESCRIPTION
+            "The source of multicast address allocation range
+            information."
+   SYNTAX  INTEGER {
+              other(1),  -- none of the following
+              manual(2), -- statically configured
+              local(3)   -- automatically added by the system,
+                         -- such as a Source-Specific Multicast
+                         -- range
+           }
+
+END
diff --git a/snmp_builder/mibs/IANA-MAU-MIB.mib b/snmp_builder/mibs/IANA-MAU-MIB.mib
new file mode 100644
index 0000000..0c393b6
--- /dev/null
+++ b/snmp_builder/mibs/IANA-MAU-MIB.mib
@@ -0,0 +1,895 @@
+IANA-MAU-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+       MODULE-IDENTITY, OBJECT-IDENTITY, mib-2
+         FROM SNMPv2-SMI
+       TEXTUAL-CONVENTION
+         FROM SNMPv2-TC
+       ;
+
+     ianaMauMIB MODULE-IDENTITY
+       LAST-UPDATED "201002230000Z"  -- February 23, 2010
+       ORGANIZATION "IANA"
+       CONTACT-INFO "        Internet Assigned Numbers Authority
+
+                     Postal: ICANN
+                             4676 Admiralty Way, Suite 330
+                             Marina del Rey, CA 90292
+
+                        Tel: +1-310-823-9358
+                      EMail: iana&iana.org"
+       DESCRIPTION
+         "This MIB module defines dot3MauType OBJECT-IDENTITIES and
+         IANAifMauListBits, IANAifMauMediaAvailable,
+         IANAifMauAutoNegCapBits, and IANAifJackType
+
+         TEXTUAL-CONVENTIONs, specifying enumerated values of the
+         ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable,
+         ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits /
+         ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects
+         respectively, defined in the MAU-MIB.
+
+         It is intended that each new MAU type, Media Availability
+         state, Auto Negotiation capability and/or Jack type defined by
+         the IEEE 802.3 working group and approved for publication in a
+         revision of IEEE Std 802.3 will be added to this MIB module,
+         provided that it is suitable for being managed by the base
+         objects in the MAU-MIB.  An Expert Review, as defined in
+         RFC 2434 [RFC2434], is REQUIRED for such additions.
+
+         The following reference is used throughout this MIB module:
+
+         [IEEE802.3] refers to:
+            IEEE Std 802.3, 2005 Edition: 'IEEE Standard for
+            Information technology - Telecommunications and information
+            exchange between systems - Local and metropolitan area
+            networks - Specific requirements -
+            Part 3: Carrier sense multiple access with collision
+            detection (CSMA/CD) access method and physical layer
+            specifications'.
+
+         This reference should be updated as appropriate when new
+         MAU types, Media Availability states, Auto Negotiation
+         capabilities, and/or Jack types are added to this MIB module.
+
+         Copyright (C) The IETF Trust (2007).
+         The initial version of this MIB module was published in
+         RFC 4836; for full legal notices see the RFC itself.
+         Supplementary information may be available at:
+         http://www.ietf.org/copyrights/ianamib.html"
+
+       REVISION     "201002230000Z"  -- February 23, 2010
+       DESCRIPTION  "Added assignments that will be included in 
+                     Clause 14 of IEEE P802.3.1."
+
+       REVISION     "200704210000Z"  -- April 21, 2007
+       DESCRIPTION  "Initial version of this MIB as published in
+                     RFC 4836."
+       ::= { mib-2 154 }
+
+     -- Textual Conventions
+
+     IANAifMauTypeListBits ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+         "This data type is used as the syntax of the ifMauTypeListBits
+         object in the (updated) definition of MAU-MIB's ifMauTable.
+
+         The most recent version of this textual convention is available
+         in the online version of this MIB module on the IANA web site.
+
+         Requests for new values should be made to IANA via email
+         (iana&iana.org).
+
+         Note that changes in this textual convention SHALL be
+         synchronized with relevant changes in the dot3MauType
+         OBJECT-IDENTITIES."
+       REFERENCE
+         "[IEEE802.3], Section 30.5.1.1.2"
+       SYNTAX       BITS {
+              bOther(0),          -- other or unknown
+              bAUI(1),            -- AUI
+              b10base5(2),        -- 10BASE-5
+              bFoirl(3),          -- FOIRL
+
+              b10base2(4),        -- 10BASE-2
+              b10baseT(5),        -- 10BASE-T duplex mode unknown
+              b10baseFP(6),       -- 10BASE-FP
+              b10baseFB(7),       -- 10BASE-FB
+              b10baseFL(8),       -- 10BASE-FL duplex mode unknown
+              b10broad36(9),      -- 10BROAD36
+              b10baseTHD(10),     -- 10BASE-T  half duplex mode
+              b10baseTFD(11),     -- 10BASE-T  full duplex mode
+              b10baseFLHD(12),    -- 10BASE-FL half duplex mode
+              b10baseFLFD(13),    -- 10BASE-FL full duplex mode
+              b100baseT4(14),     -- 100BASE-T4
+              b100baseTXHD(15),   -- 100BASE-TX half duplex mode
+              b100baseTXFD(16),   -- 100BASE-TX full duplex mode
+              b100baseFXHD(17),   -- 100BASE-FX half duplex mode
+              b100baseFXFD(18),   -- 100BASE-FX full duplex mode
+              b100baseT2HD(19),   -- 100BASE-T2 half duplex mode
+              b100baseT2FD(20),   -- 100BASE-T2 full duplex mode
+
+              b1000baseXHD(21),   -- 1000BASE-X half duplex mode
+              b1000baseXFD(22),   -- 1000BASE-X full duplex mode
+              b1000baseLXHD(23),  -- 1000BASE-LX half duplex mode
+              b1000baseLXFD(24),  -- 1000BASE-LX full duplex mode
+              b1000baseSXHD(25),  -- 1000BASE-SX half duplex mode
+              b1000baseSXFD(26),  -- 1000BASE-SX full duplex mode
+              b1000baseCXHD(27),  -- 1000BASE-CX half duplex mode
+              b1000baseCXFD(28),  -- 1000BASE-CX full duplex mode
+              b1000baseTHD(29),   -- 1000BASE-T half duplex mode
+              b1000baseTFD(30),   -- 1000BASE-T full duplex mode
+
+              b10GbaseX(31),      -- 10GBASE-X
+              b10GbaseLX4(32),    -- 10GBASE-LX4
+
+              b10GbaseR(33),      -- 10GBASE-R
+              b10GbaseER(34),     -- 10GBASE-ER
+              b10GbaseLR(35),     -- 10GBASE-LR
+              b10GbaseSR(36),     -- 10GBASE-SR
+              b10GbaseW(37),      -- 10GBASE-W
+              b10GbaseEW(38),     -- 10GBASE-EW
+              b10GbaseLW(39),     -- 10GBASE-LW
+              b10GbaseSW(40),     -- 10GBASE-SW
+              -- new since RFC 3636
+              b10GbaseCX4(41),    -- 10GBASE-CX4
+              b2BaseTL(42),       -- 2BASE-TL
+              b10PassTS(43),      -- 10PASS-TS
+              b100BaseBX10D(44),  -- 100BASE-BX10D
+              b100BaseBX10U(45),  -- 100BASE-BX10U
+              b100BaseLX10(46),   -- 100BASE-LX10
+              b1000BaseBX10D(47), -- 1000BASE-BX10D
+              b1000BaseBX10U(48), -- 1000BASE-BX10U
+              b1000BaseLX10(49),  -- 1000BASE-LX10
+              b1000BasePX10D(50), -- 1000BASE-PX10D
+              b1000BasePX10U(51), -- 1000BASE-PX10U
+              b1000BasePX20D(52), -- 1000BASE-PX20D
+              b1000BasePX20U(53), -- 1000BASE-PX20U
+              b10GbaseT(54),      -- 10GBASE-T
+              b10GbaseLRM(55),    -- 10GBASE-LRM
+              b1000baseKX(56),    -- 1000BASE-KX
+              b10GbaseKX4(57),    -- 10GBASE-KX4
+              b10GbaseKR(58),     -- 10GBASE-KR
+              b10G1GbasePRXD1(59),-- 10/1GBASE-PRX-D1
+              b10G1GbasePRXD2(60),-- 10/1GBASE-PRX-D2
+              b10G1GbasePRXD3(61),-- 10/1GBASE-PRX-D3
+              b10G1GbasePRXU1(62),-- 10/1GBASE-PRX-U1
+              b10G1GbasePRXU2(63),-- 10/1GBASE-PRX-U2
+              b10G1GbasePRXU3(64),-- 10/1GBASE-PRX-U3
+              b10GbasePRD1(65),   -- 10GBASE-PR-D1
+              b10GbasePRD2(66),   -- 10GBASE-PR-D2
+              b10GbasePRD3(67),   -- 10GBASE-PR-D3
+              b10GbasePRU1(68),   -- 10GBASE-PR-U1
+              b10GbasePRU3(69)    -- 10GBASE-PR-U3
+         }
+
+     IANAifMauMediaAvailable ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+         "This data type is used as the syntax of the
+         ifMauMediaAvailable and rpMauMediaAvailable objects in the
+         (updated) definition of MAU-MIB's ifMauTable and rpMauTable
+         respectively.
+
+         Possible values are:
+           other(1)             - undefined (not listed below)
+           unknown(2)           - MAU's true state is unknown; e.g.,
+                                  during initialization
+           available(3)         - link, light, or loopback is normal
+           notAvailable(4)      - link loss, low light, or no loopback
+           remoteFault(5)       - a fault has been detected at the
+                                  remote end of the link.  This value
+                                  applies to 10BASE-FB, 100BASE-T4 Far
+                                  End Fault Indication and non-specified
+                                  remote faults from a system running
+                                  auto-negotiation
+           invalidSignal(6)     - invalid signal has been received from
+                                  the other end of the link, 10BASE-FB
+                                  only
+           remoteJabber(7)      - remote fault, due to jabber
+
+           remoteLinkLoss(8)    - remote fault, due to link loss
+           remoteTest(9)        - remote fault, due to test
+           offline(10)          - offline, Clause 37 Auto-Negotiation
+                                  only
+           autoNegError(11)     - Auto-Negotiation Error, Clause 37
+                                  Auto-Negotiation only
+           pmdLinkFault(12)     - PMA/PMD receive link fault.  In case
+                                  of PAF (2BASE-TL / 10PASS-TS PHYs),
+                                  all PMEs in the aggregation group have
+                                  detected a link fault
+           wisFrameLoss(13)     - WIS loss of frame, 10GBASE-W only
+           wisSignalLoss(14)    - WIS loss of signal, 10GBASE-W only
+           pcsLinkFault(15)     - PCS receive link fault
+           excessiveBER(16)     - PCS Bit Error Ratio monitor
+                                  reporting excessive error ratio
+           dxsLinkFault(17)     - DTE XGXS receive link fault, XAUI only
+           pxsLinkFault(18)     - PHY XGXS receive link fault, XAUI only
+           availableReduced(19) - link normal, reduced bandwidth,
+                                  2BASE-TL / 10PASS-TS only
+           ready(20)            - at least one PME in the aggregation
+                                  group is detecting handshake tones,
+                                  2BASE-TL / 10PASS-TS only
+
+         If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T,
+         10BASE-F), then this is equivalent to the link test fail
+         state/low light function.  For an AUI, 10BASE2, 10BASE5, or
+         10BROAD36 MAU, this indicates whether loopback is detected on
+         the DI circuit.  The value of this attribute persists between
+         packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and
+         10BASEFP.
+
+         At power-up or following a reset, the Media Available state
+         will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and
+         10BASE-FP MAUs.  For these MAUs loopback will be tested on each
+         transmission during which no collision is detected.
+         If DI is receiving input when DO returns to IDL after a
+         transmission and there has been no collision during the
+         transmission, then loopback will be detected.  The Media
+         Available state will only change during noncollided
+         transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and
+         10BASE-FP MAUs.
+
+         For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX,
+         100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the
+         states within the link integrity state diagram.
+         Any MAU that implements management of [IEEE802.3] Clause
+         28 Auto-Negotiation, will map remote fault indication to
+         remoteFault(5).
+
+         Any MAU that implements management of Clause 37
+         Auto-Negotiation, will map the received RF1 and RF2 bits as
+         follows: Offline maps to offline(10), Link_Failure maps to
+         remoteFault(5), and Auto-Negotiation Error maps to
+         autoNegError(11).
+
+         The value remoteFault(5) applies to 10BASE-FB remote
+         fault indication, the 100BASE-X far-end fault indication, and
+         nonspecified remote faults from a system running Clause 28
+         Auto-Negotiation.
+
+         The value remoteJabber(7), remoteLink loss(8), or remoteTest(9)
+         SHOULD be used instead of remoteFault(5) where the reason for
+         remote fault is identified in the remote signaling protocol.
+         Where a Clause 22 MII or Clause 35 GMII is present, a logic
+         one in the remote fault bit maps to the value remoteFault(5),
+         a logic zero in the link status bit maps to the enumeration
+         notAvailable(4).  The value notAvailable(4) takes precedence
+         over remoteFault(5).
+
+         For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to
+         the condition where the PHY (PCS with connected PMEs) is
+         initializing, the value ready(20) maps to the condition where
+         the interface is down and at least one PME in the aggregation
+         group is ready for handshake, the value available(3) maps to
+         the condition where all the PMEs in the aggregation group are
+         up, the value notAvailable(4) maps to the condition where all
+         the PMEs in the aggregation group are down and no handshake
+         tones are detected, the value availableReduced(19) maps to the
+         condition where the interface is up, a link fault is detected
+         at the receive direction by one or more PMEs in the
+         aggregation group, but at least one PME is up and the
+         enumeration pmdLinkFault(12) maps to the condition where a link
+         fault is detected at the receive direction by all of the PMEs
+         in the aggregation group.
+
+         For 10 Gb/s the enumerations map to value of the link_fault
+         variable within the Link Fault Signaling state diagram
+         as follows: the value OK maps to the value available(3),
+         the value Local Fault maps to the value notAvailable(4),
+         and the value Remote Fault maps to the value remoteFault(5).
+         The value pmdLinkFault(12), wisFrameLoss(13),
+         wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or
+         dxsLinkFault(17) SHOULD be used instead of the value
+         notAvailable(4), where the reason for the Local Fault state can
+         be identified through the use of the Clause 45 MDIO Interface.
+         Where multiple reasons for the Local Fault state can be
+         identified, only the highest precedence error SHOULD be
+
+         reported.  This precedence in descending order is as follows:
+
+           pxsLinkFault
+           pmdLinkFault
+           wisFrameLoss
+           wisSignalLoss
+           pcsLinkFault
+           excessiveBER
+           dxsLinkFault.
+
+         Where a Clause 45 MDIO interface is present a logic zero in
+         the PMA/PMD Receive link status bit ([IEEE802.3]
+         Section 45.2.1.2.2) maps to the value pmdLinkFault(12),
+         logic one in the LOF status bit (Section 45.2.2.10.4) maps
+         to the value wisFrameLoss(13), a logic one in the LOS
+         status bit (Section 45.2.2.10.5) maps to the value
+         wisSignalLoss, a logic zero in the PCS Receive
+         link status bit (Section 45.2.3.2.2) maps to the value
+         pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched
+         high BER status bit (Section 45.2.3.12.2) maps to the value
+         excessiveBER, a logic zero in the DTE XS receive link status
+         bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17)
+         and a logic zero in the PHY XS transmit link status bit
+         (Section 45.2.4.2.2) maps to the value pxsLinkFault(18).
+
+         The most recent version of this textual convention is available
+         in the online version of this MIB module on the IANA web site.
+
+         Requests for new values should be made to IANA via email
+         (iana&iana.org)."
+       REFERENCE
+         "[IEEE802.3], Section 30.5.1.1.4"
+       SYNTAX       INTEGER {
+              other(1),
+              unknown(2),
+              available(3),
+              notAvailable(4),
+              remoteFault(5),
+              invalidSignal(6),
+              remoteJabber(7),
+              remoteLinkLoss(8),
+              remoteTest(9),
+              offline(10),
+              autoNegError(11),
+              pmdLinkFault(12),
+              wisFrameLoss(13),
+              wisSignalLoss(14),
+              pcsLinkFault(15),
+              excessiveBER(16),
+              dxsLinkFault(17),
+              pxsLinkFault(18),
+              availableReduced(19),
+              ready(20)
+         }
+
+     IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+         "This data type is used as the syntax of the
+         ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and
+         ifMauAutoNegCapReceivedBits objects in the (updated) definition
+         of MAU-MIB's ifMauAutoNegTable.
+
+         The most recent version of this textual convention is available
+         in the online version of this MIB module on the IANA web site.
+
+         Requests for new values should be made to IANA via email
+         (iana&iana.org)."
+       REFERENCE
+         "[IEEE802.3], Section 30.6.1.1.5"
+       SYNTAX       BITS {
+              bOther(0),          -- other or unknown
+              b10baseT(1),        -- 10BASE-T  half duplex mode
+              b10baseTFD(2),      -- 10BASE-T  full duplex mode
+              b100baseT4(3),      -- 100BASE-T4
+              b100baseTX(4),      -- 100BASE-TX half duplex mode
+              b100baseTXFD(5),    -- 100BASE-TX full duplex mode
+              b100baseT2(6),      -- 100BASE-T2 half duplex mode
+              b100baseT2FD(7),    -- 100BASE-T2 full duplex mode
+              bFdxPause(8),       -- PAUSE for full-duplex links
+              bFdxAPause(9),      -- Asymmetric PAUSE for full-duplex
+                                  --     links
+              bFdxSPause(10),     -- Symmetric PAUSE for full-duplex
+                                  --     links
+              bFdxBPause(11),     -- Asymmetric and Symmetric PAUSE for
+                                  --     full-duplex links
+              b1000baseX(12),     -- 1000BASE-X, -LX, -SX, -CX half
+                                  --     duplex mode
+              b1000baseXFD(13),   -- 1000BASE-X, -LX, -SX, -CX full
+                                  --     duplex mode
+              b1000baseT(14),     -- 1000BASE-T half duplex mode
+              b1000baseTFD(15),   -- 1000BASE-T full duplex mode
+              b10GbaseT(16),      -- 10GBASE-T
+              b1000baseKX(17),    -- 1000BASE-KX
+              b10GbaseKX4(18),    -- 10GBASE-KX4
+              b10GbaseKR(19)      -- 10GBASE-KR
+         }
+
+     IANAifJackType ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+         "Common enumeration values for repeater and interface MAU
+         jack types.  This data type is used as the syntax of the
+         ifJackType and rpJackType objects in the (updated) definition
+         of MAU-MIB's ifJackTable and rpJackTable respectively.
+
+         Possible values are:
+              other(1)          - undefined or unknown
+              rj45(2)           - RJ45
+              rj45S(3)          - RJ45 shielded
+              db9(4)            - DB9
+              bnc(5)            - BNC
+              fAUI(6)           - AUI female
+              mAUI(7)           - AUI male
+              fiberSC(8)        - SC fiber
+              fiberMIC(9)       - MIC fiber
+              fiberST(10)       - ST fiber
+              telco(11)         - Telco
+              mtrj(12)          - MT-RJ fiber
+              hssdc(13)         - fiber channel style-2
+              fiberLC(14)       - LC fiber
+              cx4(15)           - IB4X for 10GBASE-CX4
+
+         The most recent version of this textual convention is available
+         in the online version of this MIB module on the IANA web site.
+
+         Requests for new values should be made to IANA via email
+         (iana&iana.org)."
+       SYNTAX       INTEGER {
+              other(1),
+              rj45(2),
+              rj45S(3),
+              db9(4),
+              bnc(5),
+              fAUI(6),
+              mAUI(7),
+              fiberSC(8),
+              fiberMIC(9),
+              fiberST(10),
+              telco(11),
+              mtrj(12),
+              hssdc(13),
+              fiberLC(14),
+              -- new since RFC 3636
+              cx4(15)
+         }
+
+     -- OBJECT IDENTITIES for MAU types
+
+     --  (see rpMauType and ifMauType of MAU-MIB for usage)
+     -- The following definitions has been moved from RFC 3636 and
+     -- no longer appear in its revision.
+
+     dot3MauType OBJECT IDENTIFIER ::= { mib-2 snmpDot3MauMgt(26) 4 }
+
+     dot3MauTypeAUI OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "no internal MAU, view from AUI"
+       REFERENCE   "[IEEE802.3], Section 7"
+       ::= { dot3MauType 1 }
+
+     dot3MauType10Base5 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "thick coax MAU"
+       REFERENCE   "[IEEE802.3], Section 7"
+       ::= { dot3MauType 2 }
+
+     dot3MauTypeFoirl OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "FOIRL MAU"
+       REFERENCE   "[IEEE802.3], Section 9.9"
+       ::= { dot3MauType 3 }
+
+     dot3MauType10Base2 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "thin coax MAU"
+       REFERENCE   "[IEEE802.3], Section 10"
+       ::= { dot3MauType 4 }
+
+     dot3MauType10BaseT OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "UTP MAU.
+                   Note that it is strongly recommended that
+                   agents return either dot3MauType10BaseTHD or
+                   dot3MauType10BaseTFD if the duplex mode is
+                   known.  However, management applications should
+                   be prepared to receive this MAU type value from
+                   older agent implementations."
+       REFERENCE   "[IEEE802.3], Section 14"
+       ::= { dot3MauType 5 }
+
+     dot3MauType10BaseFP OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "passive fiber MAU"
+       REFERENCE   "[IEEE802.3], Section 16"
+       ::= { dot3MauType 6 }
+
+     dot3MauType10BaseFB OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "sync fiber MAU"
+       REFERENCE   "[IEEE802.3], Section 17"
+       ::= { dot3MauType 7 }
+
+     dot3MauType10BaseFL OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "async fiber MAU.
+                   Note that it is strongly recommended that
+                   agents return either dot3MauType10BaseFLHD or
+                   dot3MauType10BaseFLFD if the duplex mode is
+                   known.  However, management applications should
+                   be prepared to receive this MAU type value from
+                   older agent implementations."
+       REFERENCE   "[IEEE802.3], Section 18"
+       ::= { dot3MauType 8 }
+
+     dot3MauType10Broad36 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "broadband DTE MAU.
+                   Note that 10BROAD36 MAUs can be attached to
+                   interfaces but not to repeaters."
+       REFERENCE   "[IEEE802.3], Section 11"
+       ::= { dot3MauType 9 }
+
+     ------ new since RFC 1515:
+     dot3MauType10BaseTHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "UTP MAU, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 14"
+       ::= { dot3MauType 10 }
+
+     dot3MauType10BaseTFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "UTP MAU, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 14"
+       ::= { dot3MauType 11 }
+
+     dot3MauType10BaseFLHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "async fiber MAU, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 18"
+       ::= { dot3MauType 12 }
+
+     dot3MauType10BaseFLFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "async fiber MAU, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 18"
+       ::= { dot3MauType 13 }
+
+     dot3MauType100BaseT4 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "4 pair category 3 UTP"
+       REFERENCE   "[IEEE802.3], Section 23"
+       ::= { dot3MauType 14 }
+
+     dot3MauType100BaseTXHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "2 pair category 5 UTP, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 25"
+       ::= { dot3MauType 15 }
+
+     dot3MauType100BaseTXFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "2 pair category 5 UTP, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 25"
+       ::= { dot3MauType 16 }
+
+     dot3MauType100BaseFXHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "X fiber over PMT, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 26"
+       ::= { dot3MauType 17 }
+
+     dot3MauType100BaseFXFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "X fiber over PMT, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 26"
+       ::= { dot3MauType 18 }
+
+     dot3MauType100BaseT2HD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "2 pair category 3 UTP, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 32"
+       ::= { dot3MauType 19 }
+
+     dot3MauType100BaseT2FD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "2 pair category 3 UTP, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 32"
+       ::= { dot3MauType 20 }
+
+     ------ new since RFC 2239:
+     dot3MauType1000BaseXHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 36"
+       ::= { dot3MauType 21 }
+
+     dot3MauType1000BaseXFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 36"
+       ::= { dot3MauType 22 }
+
+     dot3MauType1000BaseLXHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Fiber over long-wavelength laser, half duplex
+                   mode"
+       REFERENCE   "[IEEE802.3], Section 38"
+       ::= { dot3MauType 23 }
+
+     dot3MauType1000BaseLXFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Fiber over long-wavelength laser, full duplex
+                   mode"
+       REFERENCE   "[IEEE802.3], Section 38"
+       ::= { dot3MauType 24 }
+
+     dot3MauType1000BaseSXHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Fiber over short-wavelength laser, half
+                   duplex mode"
+       REFERENCE   "[IEEE802.3], Section 38"
+       ::= { dot3MauType 25 }
+
+     dot3MauType1000BaseSXFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Fiber over short-wavelength laser, full
+                   duplex mode"
+       REFERENCE   "[IEEE802.3], Section 38"
+       ::= { dot3MauType 26 }
+
+     dot3MauType1000BaseCXHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Copper over 150-Ohm balanced cable, half
+                   duplex mode"
+       REFERENCE   "[IEEE802.3], Section 39"
+       ::= { dot3MauType 27 }
+
+     dot3MauType1000BaseCXFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Copper over 150-Ohm balanced cable, full
+
+                   duplex mode"
+       REFERENCE   "[IEEE802.3], Section 39"
+       ::= { dot3MauType 28 }
+
+     dot3MauType1000BaseTHD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Four-pair Category 5 UTP, half duplex mode"
+       REFERENCE   "[IEEE802.3], Section 40"
+       ::= { dot3MauType 29 }
+
+     dot3MauType1000BaseTFD OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Four-pair Category 5 UTP, full duplex mode"
+       REFERENCE   "[IEEE802.3], Section 40"
+       ::= { dot3MauType 30 }
+
+     ------ new since RFC 2668:
+     dot3MauType10GigBaseX OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "X PCS/PMA, unknown PMD."
+       REFERENCE   "[IEEE802.3], Section 48"
+       ::= { dot3MauType 31 }
+
+     dot3MauType10GigBaseLX4 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "X fiber over WWDM optics"
+       REFERENCE   "[IEEE802.3], Section 53"
+       ::= { dot3MauType 32 }
+
+     dot3MauType10GigBaseR OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "R PCS/PMA, unknown PMD."
+       REFERENCE   "[IEEE802.3], Section 49"
+       ::= { dot3MauType 33 }
+
+     dot3MauType10GigBaseER OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "R fiber over 1550 nm optics"
+       REFERENCE   "[IEEE802.3], Section 52"
+       ::= { dot3MauType 34 }
+
+     dot3MauType10GigBaseLR OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "R fiber over 1310 nm optics"
+       REFERENCE   "[IEEE802.3], Section 52"
+       ::= { dot3MauType 35 }
+
+     dot3MauType10GigBaseSR OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "R fiber over 850 nm optics"
+       REFERENCE   "[IEEE802.3], Section 52"
+       ::= { dot3MauType 36 }
+
+     dot3MauType10GigBaseW OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "W PCS/PMA, unknown PMD."
+       REFERENCE   "[IEEE802.3], Section 49 and 50"
+       ::= { dot3MauType 37 }
+
+     dot3MauType10GigBaseEW OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "W fiber over 1550 nm optics"
+       REFERENCE   "[IEEE802.3], Section 52"
+       ::= { dot3MauType 38 }
+
+     dot3MauType10GigBaseLW OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "W fiber over 1310 nm optics"
+       REFERENCE   "[IEEE802.3], Section 52"
+       ::= { dot3MauType 39 }
+
+     dot3MauType10GigBaseSW OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "W fiber over 850 nm optics"
+       REFERENCE   "[IEEE802.3], Section 52"
+       ::= { dot3MauType 40 }
+
+     ------ new since RFC 3636:
+     dot3MauType10GigBaseCX4 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "X copper over 8 pair 100-Ohm balanced cable"
+       REFERENCE   "[IEEE802.3], Section 54"
+       ::= { dot3MauType 41 }
+
+     dot3MauType2BaseTL OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Voice grade UTP copper, up to 2700m, optional PAF"
+       REFERENCE   "[IEEE802.3], Sections 61 and 63"
+       ::= { dot3MauType 42 }
+
+     dot3MauType10PassTS OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Voice grade UTP copper, up to 750m, optional PAF"
+       REFERENCE   "[IEEE802.3], Sections 61 and 62"
+       ::= { dot3MauType 43 }
+
+     dot3MauType100BaseBX10D OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
+       REFERENCE   "[IEEE802.3], Section 58"
+       ::= { dot3MauType 44 }
+
+     dot3MauType100BaseBX10U OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
+       REFERENCE   "[IEEE802.3], Section 58"
+       ::= { dot3MauType 45 }
+
+     dot3MauType100BaseLX10 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Two single-mode fibers, long wavelength, 10km"
+       REFERENCE   "[IEEE802.3], Section 58"
+       ::= { dot3MauType 46 }
+
+     dot3MauType1000BaseBX10D OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
+       REFERENCE   "[IEEE802.3], Section 59"
+       ::= { dot3MauType 47 }
+
+     dot3MauType1000BaseBX10U OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
+       REFERENCE   "[IEEE802.3], Section 59"
+       ::= { dot3MauType 48 }
+
+     dot3MauType1000BaseLX10 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Two sigle-mode fiber, long wavelength, 10km"
+       REFERENCE   "[IEEE802.3], Section 59"
+       ::= { dot3MauType 49 }
+
+     dot3MauType1000BasePX10D OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber EPON OLT, 10km"
+       REFERENCE   "[IEEE802.3], Section 60"
+       ::= { dot3MauType 50 }
+
+     dot3MauType1000BasePX10U OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber EPON ONU, 10km"
+       REFERENCE   "[IEEE802.3], Section 60"
+       ::= { dot3MauType 51 }
+
+     dot3MauType1000BasePX20D OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber EPON OLT, 20km"
+       REFERENCE   "[IEEE802.3], Section 60"
+       ::= { dot3MauType 52 }
+
+     dot3MauType1000BasePX20U OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber EPON ONU, 20km"
+       REFERENCE   "[IEEE802.3], Section 60"
+       ::= { dot3MauType 53 }
+
+     dot3MauType10GbaseT OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "Four-pair Category 6A or better, full duplex mode only"
+       REFERENCE   "IEEE Std 802.3, Clause 55"
+       ::= { dot3MauType 54 }
+
+     dot3MauType10GbaseLRM OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "R multimode fiber over 1310 nm optics"
+       REFERENCE   "IEEE Std 802.3, Clause 68"
+       ::= { dot3MauType 55 }
+
+     dot3MauType1000baseKX OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "X backplane, full duplex mode only"
+       REFERENCE   "IEEE Std 802.3, Clause 70"
+       ::= { dot3MauType 56 }
+
+     dot3MauType10GbaseKX4 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "4 lane X backplane, full duplex mode only"
+       REFERENCE   "IEEE Std 802.3, Clause 71"
+       ::= { dot3MauType 57 }
+
+     dot3MauType10GbaseKR OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "R backplane, full duplex mode only"
+       REFERENCE   "IEEE Std 802.3, Clause 72"
+       ::= { dot3MauType 58 }
+
+     dot3MauType10G1GbasePRXD1 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber asymmetric-rate EPON OLT, supporting low
+                    power budget (PRX10)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 59 }
+
+     dot3MauType10G1GbasePRXD2 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber asymmetric-rate EPON OLT, supporting
+                   medium power budget (PRX20)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 60 }
+
+     dot3MauType10G1GbasePRXD3 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber asymmetric-rate EPON OLT, supporting high
+                   power budget (PRX30)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 61 }
+
+     dot3MauType10G1GbasePRXU1 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber asymmetric-rate EPON ONU, supporting low
+                   power budget (PRX10)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 62 }
+
+     dot3MauType10G1GbasePRXU2 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber asymmetric-rate EPON ONU, supporting
+                   medium power budget (PRX20)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 63 }
+
+     dot3MauType10G1GbasePRXU3 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber asymmetric-rate EPON ONU, supporting high
+                   power budget (PRX30)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 64 }
+
+     dot3MauType10GbasePRD1 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber symmetric-rate EPON OLT, supporting low
+                   power budget (PR10)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 65 }
+
+     dot3MauType10GbasePRD2 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber symmetric-rate EPON OLT, supporting
+                   medium power budget (PR20)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 66 }
+
+     dot3MauType10GbasePRD3 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber symmetric-rate EPON OLT, supporting high
+                   power budget (PR30)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 67 }
+
+     dot3MauType10GbasePRU1 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber symmetric-rate EPON ONU, supporting
+                   low and medium power budget (PR10 and PR20)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 68 }
+
+     dot3MauType10GbasePRU3 OBJECT-IDENTITY
+       STATUS      current
+       DESCRIPTION "One single-mode fiber symmetric-rate EPON ONU, supporting high
+                   power budget (PR30)"
+       REFERENCE   "IEEE Std 802.3, Clause 75"
+       ::= { dot3MauType 69 }
+
+END
diff --git a/snmp_builder/mibs/IANA-PRINTER-MIB.mib b/snmp_builder/mibs/IANA-PRINTER-MIB.mib
new file mode 100644
index 0000000..09a1224
--- /dev/null
+++ b/snmp_builder/mibs/IANA-PRINTER-MIB.mib
@@ -0,0 +1,2084 @@
+IANA-PRINTER-MIB DEFINITIONS ::= BEGIN
+ -- http://www.iana.org/assignments/ianaprinter-mib
+
+IMPORTS
+    MODULE-IDENTITY,
+        mib-2
+            FROM SNMPv2-SMI                              -- [RFC2578]
+    TEXTUAL-CONVENTION
+            FROM SNMPv2-TC;                              -- [RFC2579]
+
+ianaPrinterMIB MODULE-IDENTITY
+    LAST-UPDATED  "201005150000Z" -- May 17, 2010
+
+    ORGANIZATION  "IANA"
+    CONTACT-INFO  "Internet Assigned Numbers Authority
+                  Postal: ICANN
+                          4676 Admiralty Way, Suite 330
+                          Marina del Rey, CA 90292
+
+                  Tel:    +1 310 823 9358
+                  E-Mail: iana&iana.org"
+    DESCRIPTION   "This MIB module defines a set of printing-related
+                  TEXTUAL-CONVENTIONs for use in Printer MIB (RFC 3805),
+                  Finisher MIB (RFC 3806), and other MIBs which need to
+                  specify printing mechanism details.
+
+                  Any additions or changes to the contents of this MIB
+                  module require either publication of an RFC, or
+                  Designated Expert Review as defined in RFC 2434,
+                  Guidelines for Writing an IANA Considerations Section
+                  in RFCs.  The Designated Expert will be selected by
+                  the IESG Area Director(s) of the Applications Area.
+
+                  Copyright (C) The Internet Society (2004). The
+                  initial version of this MIB module was published
+                  in RFC 3805.  For full legal notices see the RFC
+                  itself or see:
+                  http://www.ietf.org/copyrights/ianamib.html"
+
+    REVISION      "201005170000Z" -- May 17, 2010
+    DESCRIPTION   "Added 72-83 in PrtInterpreterLangFamilyTC, 
+                  600+ lines from 30203-31838 in PrtAlertCodeTC."
+
+    REVISION      "201004070000Z" -- April 7, 2010
+    DESCRIPTION   "Added langJDF(68), langJMF(69), langPPML(70), 
+                  and langXHTMLPrint(71)."
+
+    REVISION      "200911230000Z" -- November 23, 2009
+    DESCRIPTION   "Added langXPS(66) and langOpenXPS(67)."
+
+    REVISION      "200910140000Z" -- October 14, 2009
+    DESCRIPTION   "Added references for langPCLXL(47), 
+                  langART(48), and langTIPSI(49)."
+
+    REVISION      "200902060000Z" -- February 6, 2009
+    DESCRIPTION   "Added chWSPrint(46) 'Channel Type' for Web 
+                  Services based printing." 
+
+    REVISION      "200509140000Z"  -- September 14, 2005
+    DESCRIPTION   "Updates to include missing 'unknown' values
+	               for PrtCoverStatusTC, PrtChannelTypeTC, 
+                  PrtAlertGroupTC and removal of comment for
+                  for PrtAlertGroupTC."
+
+    REVISION      "200406020000Z"  -- June 2, 2004
+    DESCRIPTION   "Original version, published in coordination
+                  with Printer MIB (RFC 3805)."
+    ::= { mib-2 109 }
+
+--
+-- Generic TEXTUAL-CONVENTIONs
+--
+
+PrtCoverStatusTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtCoverStatus in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Values for encoding the state of a particular cover or
+        access panel on the printer case or enclosure."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  coverOpen(3),
+                  coverClosed(4),
+                  interlockOpen(5),
+                  interlockClosed(6)
+
+                  }
+
+--
+-- General Group TEXTUAL-CONVENTIONs
+--
+
+PrtGeneralResetTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtGeneralReset in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Values for reading and writing the prtGeneralReset object.
+
+        If a device does not have NVRAM, the device shall none the
+        less respond to a SET with the value resetToNVRAM(5) with a
+        sort of warm reset that resets the device to implementation-
+        defined state that is preferably under control of the system
+        administrator by some means outside the scope of the Printer
+        MIB specification."
+    SYNTAX    INTEGER {
+                  notResetting(3),
+                  powerCycleReset(4), -- Cold Start
+                  resetToNVRAM(5), -- Warm Start
+                  resetToFactoryDefaults(6) -- Reset contents of
+                                            -- NVRAM to factory
+                                            -- defaults
+                  }
+--
+-- Channel Group TEXTUAL-CONVENTIONs
+--
+
+PrtChannelTypeTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtChannelType in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "This enumeration indicates the type of channel that is
+        receiving jobs."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  chSerialPort(3),
+                  chParallelPort(4),
+                  chIEEE1284Port(5),
+                  chSCSIPort(6),
+                  chAppleTalkPAP(7),
+                      -- AppleTalk Printer
+                      -- Access Protocol (PAP)
+                      --
+                      -- prtChannelInformation entry:
+
+                      --
+                      -- Printer Name
+                      --   Keyword:      Name
+                      --   Syntax:       Name
+                      --   Status:       Optional
+                      --   Multiplicity: Single
+                      --   Description:  The name of the printer
+                      --     within the AppleTalk naming scope
+                  chLPDServer(8),
+                      -- prtChannelInformation entry:
+                      --
+                      -- Printer queue name
+                      --   Keyword:      Queue
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description: queue name as
+                      --     defined in [RFC1179].
+                  chNetwareRPrinter(9),
+                      -- Novell, Inc.
+                      -- For each entry of this type, the
+                      -- prtChannelInformation must have a pair of
+                      -- keywords.  For Netware 3.x channels this must
+                      -- be a (PServer, Printer) pair.  For Netware
+                      -- 4.x channels and for IntranetWare channels
+                      -- this must be a (NDSTree, NDSPrinter) pair.
+                      --
+                      -- prtChannelInformation entries:
+
+                      -- Print Server Name
+                      --   Keyword:      PServer
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The Pserver's SAP name
+                      --
+                      -- Printer Number
+                      --   Keyword:      Printer
+                      --   Syntax:       Integer
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The printer number
+                      --
+                      -- NDSTree
+                      --   Keyword:      NDSTree
+                      --   Syntax:       Name
+                      --   Multiplicity: Single
+                      --   Description:  The tree's SAP name
+
+                      --
+                      -- NDS Printer object
+                      --   Keyword:      NDSPrinter
+                      --   Syntax:       Text (Unicode)
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The fully qualified
+                      --                 name of the Printer
+                      --
+                      -- In the Netware 3.x environment, the
+                      -- client checks the Bindery object
+                      -- representing the named PServer.  The
+                      -- client then checks for queues which
+                      -- are associated with the numbered
+                      -- printer.  In the 4.x and IntraNetware
+                      -- environment, the client looks up the
+                      -- queues which are associated with the
+                      -- NDS Printer Object in the named Tree.
+                      -- Depending on client access rights to
+                      -- those queues, the client submits jobs
+                      -- to the appropriate queue.
+                  chNetwarePServer(10),
+                      -- Novell,Inc.
+                      -- For each entry of this type, the
+                      -- prtChannelInformation must have a pair
+                      -- of keywords.  For Netware 3.x channels
+                      -- this must be a (Server, PServer) pair.
+                      -- For Netware 4.x and IntranetWare
+                      -- channels, this must be a
+                      -- (NDSTree, NDSPServer) pair.
+                      --
+                      -- prtChannelInformation entries:
+                      --
+                      -- Server Name
+                      --   Keyword:      Server
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The SAP name of the
+                      --   server for which the PServer is defined.
+                      --
+                      -- PServer
+                      --   Keyword:      PServer
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The bindery name of
+                      --                 the PServer
+
+                      --
+                      -- NDS Tree
+                      --   Keyword:      NDSTree
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The NDS Tree name
+                      --
+                      -- PServer
+                      --   Keyword:      NDSPServer
+                      --   Syntax:       Text (Unicode)
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The fully qualified
+                      --     name of the PServer object in the tree.
+                      --
+                      -- In the 3.x environment, the client
+                      -- checks the bindery object
+                      -- representing the named PServer on the
+                      -- named Server.  In the 4.x and
+                      -- IntranetWare environment,
+                      -- the client checks the NDS object
+                      -- representing the named PServer in the
+                      -- named Tree.  In either case, the
+                      -- client then checks for all queues
+                      -- associated with the Pserver object.
+                      -- Depending on client access rights
+                      -- to those queues, the client submits
+                      -- jobs to the appropriate queue.
+                  chPort9100(11),
+                      -- DEPRECATED
+                      -- (see chPortTCP - 37; chBidirPortTCP - 38)
+                  chAppSocket(12),
+                      -- A bi-directional, LPD-like, protocol using
+                      -- 9101 for control and 9100 for data.
+                      -- Adobe Systems, Inc.
+                  chFTP(13),         -- [RFC959]
+                  chTFTP(14),        -- [RFC1350]
+                  chDLCLLCPort(15),
+                  chIBM3270(16),     -- IBM Coax
+                  chIBM5250(17),     -- IBM Twinax
+                  chFax(18),
+                  chIEEE1394(19),
+                  chTransport1(20),
+                      -- TCP port 35, for reserved TCP port list see
+                      -- [RFC3232].  This RFC should also be
+                      -- referenced for other channel
+                      -- enumerations utilizing TCP port
+
+                      -- numbers 0 through 1024.
+                  chCPAP(21),      -- TCP port 170
+                      -- Digital Equipment Corp.
+                  chDCERemoteProcCall(22), -- OSF
+                      -- DEPRECATED
+                  chONCRemoteProcCall(23), -- SUN Microsystems
+                      -- DEPRECATED
+                  chOLE(24),         -- Microsoft
+                      -- DEPRECATED
+                  chNamedPipe(25),
+                  chPCPrint(26),   -- Banyan
+                  chServerMessageBlock(27),
+                      -- File/Print sharing protocol used by
+                      -- various network operating systems
+                      -- from IBM 3Com, Microsoft and others
+                      --
+                      -- prtChannelInformation entry:
+                      --
+                      -- Service Name
+                      --   Keyword:      Name
+                      --   Syntax:       Name
+                      --   Status:       Optional
+                      --   Multiplicity: Single
+                      --   Description:  The service name of
+                      --                 the printer
+                  chDPMF(28),   -- IBM Infoprint
+                  chDLLAPI(29), -- Microsoft
+                      -- DEPRECATED
+                  chVxDAPI(30), -- Microsoft
+                      -- DEPRECATED
+                  chSystemObjectManager(31), -- IBM
+                  chDECLAT(32),
+                      -- Digital Equipment Corp.
+                      --
+                      -- prtChannelInformation entries:
+                      --
+                      -- Port Name
+                      --   Keyword:      Port
+                      --   Syntax:       Name
+                      --   Status:       Conditionally
+                      --                 Mandatory
+                      --                 (see note below)
+                      --   Multiplicity: Single
+                      --   Description:  LAT port name
+                      --
+                      -- Service Name
+                      --   Keyword:      Service
+                      --   Syntax:       Name
+
+                      --   Status:       Conditionally
+                      --                 Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  LAT service name
+                      --
+                      -- The LAT channel may be
+                      -- identified by either a port or
+                      -- service, so either a
+                      -- Port or Service entry must be
+                      -- specified, but not both.
+                  chNPAP(33),
+                  chUSB(34), -- Not in RFC 1759
+                             -- Universal Serial Bus
+                  chIRDA(35), -- Not in RFC 1759
+                              -- Infrared Data Assoc. Prot.
+                  chPrintXChange(36),  -- Not in RFC 1759
+                                       -- PrintXChange Protocol
+                  chPortTCP(37),  -- Not in RFC 1759
+                      -- A unidirectional "raw" TCP
+                      -- channel that uses an administratively
+                      -- assigned TCP port address.
+                      --
+                      -- prtChannelInformation entry:
+                      --
+                      -- Port Number
+                      --   Keyword:      Port
+                      --   Syntax:       decimal number
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  TCP port number
+                  chBidirPortTCP(38),  -- Not in RFC 1759
+                      -- A bi-directional version of chPortTCP
+                      --
+                      -- prtChannelInformation entries:
+                      -- (See chPortTCP)
+                  chUNPP(39),  -- Not in RFC 1759
+                      -- Universal Network Printing
+                      -- Protocol(UNPP). A bi-directional,
+                      -- multiport network printing
+                      -- application protocol available on
+                      -- multiple transport protocols.
+                      -- Underscore, Inc.
+                      -- Contact: info&underscore.com
+                  chAppleTalkADSP(40),  -- Not in RFC 1759
+                      -- AppleTalk Data Stream Protocol.
+                      -- ADSP is part of the AppleTalk
+                      -- suite of protocols.
+                      -- It is a symmetric, connection-
+
+                      -- oriented protocol that makes
+                      -- possible the establishment
+                      -- and maintenance of full-duplex
+                      -- streams of data bytes between
+                      -- two sockets in an AppleTalk
+                      -- internet.
+                      -- See [APPLEMAC].
+                  chPortSPX(41),  -- Not in RFC 1759
+                      -- Sequenced Packet Exchange (SPX)
+                      -- socket.
+                      -- Novell, Inc. Similar to TCP, a
+                      -- bi-directional data pipe using
+                      -- Novell SPX as a transport.
+                      --
+                      -- prtChannelInformation entries:
+                      --
+                      -- Network Number
+                      --   Keyword:      Net
+                      --   Syntax:       HexString
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The network number
+                      --
+                      -- Node Number
+                      --   Keyword:      Node
+                      --   Syntax:       HexString
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The node number
+                      --
+                      -- Socket Number
+                      --   Keyword:      Socket
+                      --   Syntax:       HexString
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The SPX socket number
+                      --
+                      -- There must be exactly one "Net" and
+                      -- one "Node" and one "Socket" entry.  A
+                      -- HexString is a binary value
+                      -- represented as a string of
+                      -- ASCII characters using hexadecimal
+                      -- notation.
+                  chPortHTTP(42),  -- Not in RFC 1759
+                      -- Hypertext Transfer Protocol. See [RFC1945]
+                      -- and [RFC2616].
+                  chNDPS(43),  -- Not in RFC 1759
+                      -- Novell, Inc.
+
+                      --
+                      -- prtChannelInformation entry:
+                      --
+                      -- Printer Agent Name
+                      --   Keyword:      PA
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Description:  The NDPS Printer
+                      --                 Agent Name
+                  chIPP(44),  -- Not in RFC 1759
+                      -- Internet Printing Protocol (IPP),
+                      -- (IPP/1.1 - see [RFC2910] and [RFC2911])
+                      -- also applies to all future versions of IPP.
+                      --
+                      -- IPP Printer URI
+                      --   Keyword:      URI
+                      --   Syntax:       URI (Unicode UTF-8 per
+                      --                 [RFC2396])
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Default:      not applicable
+                      --   Description:  URI of this IPP Printer
+                      --     within Internet naming scope.  Unicode
+                      --     UTF-8 [RFC3629] string with
+                      --     hexadecimal escapes for any non-ASCII
+                      --     characters (per [RFC2396]).
+                      --   Conformance: An IPP Printer shall list all
+                      --     IPP URI it supports (one per IPP Channel
+                      --     entry).  If a URI contains the 'http:'
+                      --     scheme it must have an explicit port.
+                      --   See: [RFC3629], [RFC2396], [RFC2910],
+                     --     [RFC2911].
+                      --
+                      -- IPP Printer Client Authentication
+                      --   Keyword:      Auth
+                      --   Syntax:       Keyword
+                      --   Status:       Optional
+                      --   Multiplicity: Single
+                      --   Default:      'none'
+                      --   Description:  A client authentication
+                      --     mechanism supported for this IPP Printer
+                      --     URI:
+                      --       'none'
+                      --         no client authentication mechanism
+                      --       'requesting-user-name'
+                      --         authenticated user in 'requesting-
+                      --         user-name'
+
+                      --       'basic'
+                      --         authenticated user via HTTP Basic
+                      --         mechanism
+                      --       'digest'
+                      --         authenticated user via HTTP Digest
+                      --         mechanism
+                      --       'certificate'
+                      --         authenticated user via certificate
+                      --         mechanism
+                      --   Conformance: An IPP Printer should list
+                      --     all IPP client authentication mechanisms
+                      --     it supports (one per IPP Channel entry).
+                      --     See: [RFC2911] and [RFC2910].
+                      --
+                      -- IPP Printer Security
+                      --   Keyword:      Security
+                      --   Syntax:       Keyword
+                      --   Status:       Optional
+                      --   Multiplicity: Single
+                      --   Default:      'none'
+                      --   Description:  A security mechanism
+                      --     supported for this IPP Printer URI:
+                      --     'none'
+                      --       no security mechanism
+                      --     'ssl3'
+                      --       SSL3 secure communications channel
+                      --       protocol
+                      --     'tls'
+                      --       TLS secure communications channel
+                      --       protocol
+                      --   Conformance: An IPP Printer should list
+                      --     all IPP security mechanisms it supports
+                      --     (one per IPP Channel entry).
+                      --   See: [RFC2246], [RFC2911].
+                      --
+                      -- IPP Printer Protocol Version
+                      --   Keyword:      Version
+                      --   Syntax:       Keyword
+                      --   Status:       Optional
+                      --   Multiplicity: Multiple
+                      --   Default:      '1.1'
+                      --   Description:  All of the IPP protocol
+                      --     versions (major.minor) supported for
+                      --     this IPP Printer URI:
+                      --     '1.0'
+                      --       IPP/1.0 conforming Printer
+                      --     '1.1'
+                      --       IPP/1.1 conforming Printer
+
+                      --   Conformance:  An IPP Printer should list
+                      --     all IPP versions it supports (all listed
+                      --     in each IPP Channel entry).  An IPP
+                      --     Client should select the highest
+                      --     numbered version the IPP Client supports
+                      --     for use in all IPP Requests (for optimum
+                      --     interworking).
+                      --   See: [RFC2911].
+                  chSMTP(45),
+                      -- Print Job submission via Simple Mail
+                      -- Transfer Protocol (SMTP) - see [RFC2821]
+                      --
+                      -- prtChannelInformation entry:
+                      --
+                      --   Keyword:      Mailto
+                      --   Syntax:       Name
+                      --   Status:       Mandatory
+                      --   Multiplicity: Single
+                      --   Default:      not applicable
+                      --   Description:  The SMTP URL of the printer.
+                  chWSPrint(46) -- Not in RFC 3805
+                      -- Web Services on Devices Printer (WS-Print),
+                      -- (WS-Print 1.0 - see [WS-Print])
+                      -- 
+                      -- WS-Print Service URL
+                      -- Keyword: ServiceURL
+                      -- Syntax: URI (Unicode UTF-8 per
+                      -- [RFC3986])
+                      -- Status: Mandatory
+                      -- Multiplicity: Multiple
+                      -- Default: not applicable
+                      -- Description: URL of this WS-Print Printer
+                      -- within Internet naming scope. Unicode
+                      -- UTF-8 [RFC3629] string with
+                      -- hexadecimal escapes for any non-ASCII
+                      -- characters (per [RFC3986]).
+                      -- Conformance: A WS-Print Printer shall list
+                      -- all URLs it
+                      -- 
+                      -- WS-Print Web Services Target Namespace
+                      -- Keyword: Namespace
+                      -- Syntax: 'URI (Unicode UTF-8 per RFC 3986)
+                      -- Status: Optional
+                      -- Multiplicity: Multiple
+                      -- Default: http://schemas.microsoft.com/windows/2006/08/wdp/print
+                      -- Description: XML Namespace for the Service
+                      -- and associated print service model. Unicode
+                      -- UTF-8 [RFC3629] string with
+                      -- hexadecimal escapes for any non-ASCII
+                      -- characters (per [RFC3986]).
+                      -- Conformance: A WS-Print Printer shall list
+                      -- all interoperable WS-Print namespaces it
+                      -- supports.
+}
+
+--
+-- Interpreter Group TEXTUAL-CONVENTIONs
+--
+
+PrtInterpreterLangFamilyTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtInterpreterLangFamily in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "This enumeration indicates the type of interpreter that is
+        receiving jobs."
+    SYNTAX    INTEGER {
+        other(1),
+        unknown(2),          -- Not in RFC 1759
+        langPCL(3),          -- PCL.  Starting with PCL version 5,
+                             -- HP-GL/2 is included as part of the
+                             -- PCL language.
+                             -- PCL and HP-GL/2 are registered
+                             -- trademarks of Hewlett-Packard
+                             -- Company.
+        langHPGL(4),         -- Hewlett-Packard Graphics Language.
+                             -- HP-GL is a registered trademark of
+                             -- Hewlett-Packard Company.
+        langPJL(5),          -- Peripheral Job Language.  Appears in
+                             -- the data stream between data intended
+                             -- for a page description language.
+                             -- Hewlett-Packard Co.
+
+        langPS(6),           -- PostScript (tm) Language
+                             -- Postscript - a trademark of Adobe
+                             -- Systems Incorporated which may be
+                             -- registered in certain jurisdictions
+        langIPDS(7),         -- Intelligent Printer Data Stream
+                             -- Bi-directional print data stream for
+                             -- documents consisting of data objects
+                             -- (text, image, graphics, bar codes),
+                             -- resources (fonts, overlays) and page,
+                             -- form and finishing instructions.
+                             -- Facilitates system level device
+                             -- control, document tracking and error
+                             -- recovery throughout the print
+                             -- process.
+                             -- IBM Corporation.
+        langPPDS(8),         -- IBM Personal Printer Data Stream.
+                             -- Originally called IBM ASCII, the name
+                             -- was changed to PPDS when the Laser
+                             -- Printer was introduced in 1989.
+                             -- Lexmark International, Inc.
+        langEscapeP(9),      -- Epson Corp.
+        langEpson(10),
+        langDDIF(11),        -- Digital Document Interchange Format
+                             -- Digital Equipment Corp., Maynard MA
+        langInterpress(12),
+                             -- Xerox Corp.
+        langISO6429(13),     -- ISO 6429.  Control functions for
+                             -- Coded Character Sets (has ASCII
+                             -- control characters, plus additional
+                             -- controls for
+                             -- character imaging devices.)
+        langLineData(14),    -- line-data:  Lines of data as
+                             -- separate ASCII or EBCDIC records
+                             -- and containing no control functions
+                             -- (no CR, LF, HT, FF, etc.)
+                             -- For use with traditional line
+                             -- printers.  May use CR and/or LF to
+                             -- delimit lines, instead of records.
+                             -- See ISO 10175 Document Printing
+                             -- Application (DPA) [ISO10175].
+        langMODCA(15),       -- Mixed Object Document Content
+                             -- Architecture
+                             -- Definitions that allow the
+                             -- composition, interchange, and
+                             -- presentation of final form
+                             -- documents as a collection of data
+                             -- objects (text, image, graphics, bar
+                             -- codes), resources (fonts, overlays)
+
+                             -- and page, form and finishing
+                             -- instructions.
+                             -- IBM Corporation.
+        langREGIS(16),       -- Remote Graphics Instruction Set,
+                             -- Digital Equipment Corp., Maynard MA
+        langSCS(17),         -- SNA Character String
+                             -- Bi-directional print data stream for
+                             -- SNA LU-1 mode of communication.
+                             -- IBM
+        langSPDL(18),        -- ISO 10180 Standard Page Description
+                             -- Language
+                             -- ISO Standard
+        langTEK4014(19),     -- Tektronix Corp.
+        langPDS(20),
+        langIGP(21),         -- Printronix Corp.
+        langCodeV(22),       -- Magnum Code-V, Image and printer
+                             -- control language used to control
+                             -- impact/dot-matrix printers.
+                             -- QMS, Inc., Mobile AL
+        langDSCDSE(23),      -- DSC-DSE:  Data Stream Compatible and
+                             -- Emulation Bi-directional print data
+                             -- stream for non-SNA (DSC) and SNA LU-3
+                             -- 3270 controller (DSE) communications
+                             -- IBM
+        langWPS(24),         -- Windows Printing System, Resource
+                             -- based command/data stream used by
+                             -- Microsoft At Work Peripherals.
+                             -- Developed by the Microsoft
+                             -- Corporation.
+        langLN03(25),        -- Early DEC-PPL3, Digital Equipment
+                             -- Corp.
+        langCCITT(26),
+        langQUIC(27),        -- QUIC (Quality Information Code), Page
+                             -- Description Language for laser
+                             -- printers.  Included graphics, printer
+                             -- control capability and emulation of
+                             -- other well-known printer.
+                             -- QMS, Inc.
+        langCPAP(28),        -- Common Printer Access Protocol
+                             -- Digital Equipment Corp.
+        langDecPPL(29),      -- Digital ANSI-Compliant Printing
+                             -- Protocol
+                             -- (DEC-PPL)
+                             -- Digital Equipment Corp.
+        langSimpleText(30),
+                             -- simple-text:  character coded data,
+                             -- including NUL, CR , LF, HT, and FF
+                             -- control characters.  See ISO 10175
+
+                             -- Document Printing Application (DPA)
+                             -- [ISO10175].
+        langNPAP(31),        -- Network Printer Alliance Protocol
+                             -- (NPAP).  This protocol has been
+                             -- superseded by the IEEE 1284.1 TIPSI
+                             -- Std (ref. LangTIPSI(49)).
+        langDOC(32),         -- Document Option Commands, Appears in
+                             -- the data stream between data
+                             -- intended for a page description.
+                             -- QMS, Inc.
+        langimPress(33),     -- imPRESS, Page description language
+                             -- originally developed for the
+                             -- ImageServer product line. A binary
+                             -- language providing representations
+                             -- of text, simple graphics, and some
+                             -- large forms (simple
+                             -- bit-map and CCITT group 3/4
+                             -- encoded).The
+                             -- language was intended to be sent over
+                             -- an 8-bit channel and supported early
+                             -- document preparation languages (e.g.,
+                             -- TeX and TROFF).
+                             -- QMS, Inc.
+        langPinwriter(34),
+                             -- 24 wire dot matrix printer  for
+                             -- USA, Europe, and Asia except
+                             -- Japan.
+                             -- More widely used in Germany, and
+                             -- some Asian countries than in US.
+                             -- NEC
+        langNPDL(35),        -- Page printer  for Japanese market.
+                             -- NEC
+        langNEC201PL(36),    -- Serial printer language used in
+                             -- the Japanese market.
+                             -- NEC
+        langAutomatic(37),
+                             -- Automatic PDL sensing.  Automatic
+                             -- sensing of the interpreter
+                             -- language family by the printer
+                             -- examining the document content.
+                             -- Which actual interpreter language
+                             -- families are sensed depends on
+                             -- the printer implementation.
+        langPages(38),       -- Page printer Advanced Graphic
+                             -- Escape Set
+                             -- IBM Japan
+        langLIPS(39),        -- LBP Image Processing System
+        langTIFF(40),        -- Tagged Image File Format (Aldus)
+
+        langDiagnostic(41),
+                             -- A hex dump of the input to the
+                             -- interpreter
+        langPSPrinter(42),
+                             -- The PostScript Language used for
+                             -- control (with any PDLs)
+                             -- Adobe Systems Incorporated
+        langCaPSL(43),       -- Canon Print Systems Language
+        langEXCL(44),        -- Extended Command Language
+                             -- Talaris Systems Inc.
+        langLCDS(45),        -- Line Conditioned Data Stream
+                             -- Xerox Corporation
+        langXES(46),         -- Xerox Escape Sequences
+                             -- Xerox Corporation
+        langPCLXL(47),       -- Not in RFC 1759
+                             -- Printer Control Language. Extended
+                             -- language features for printing, and
+                             -- printer control.
+                             -- Tammy Ferguson (HP)
+                             -- and Binnur Al-Kazily (HP)
+                             -- Technical reference manual: None
+                             -- Hewlett-Packard Co.
+        langART(48),         -- Not in RFC 1759
+                             -- Advanced Rendering Tools (ART).
+                             -- Page Description language
+                             -- originally developed for the Laser
+                             -- Press printers.
+                             -- Norio Iwamoto (Fuji Xerox)
+                             -- and Tom Hastings (Xerox)
+                             -- Technical reference manual: "ART IV
+                             -- Reference Manual", No F33M.
+                             -- Fuji Xerox Co., Ltd.
+        langTIPSI(49),       -- Not in RFC 1759
+                             -- Transport Independent Printer
+                             -- System Interface
+                             -- Don Wright (Lexmark)
+                             -- Technical reference manual: "IEEE
+                             -- 1284.1"
+        langPrescribe(50),   -- Not in RFC 1759
+                             -- Page description and printer
+                             -- control language. It can be
+                             -- described with ordinary ASCII
+                             -- Technical reference manual:
+                             -- "PRESCRIBE II Programming Manual"
+        langLinePrinter(51), -- Not in RFC 1759
+                             -- A simple-text character stream which
+                             -- supports the control codes LF, VT,
+                             -- FF, and plus Centronics or
+                             -- Dataproducts Vertical Format Unit
+                             -- (VFU) language is commonly used on
+                             -- many older model line and matrix
+                             -- printers.
+        langIDP(52),         -- Not in RFC 1759
+                             -- Imaging Device Protocol
+                             -- Apple Computer.
+
+        langXJCL(53),        -- Not in RFC 1759
+                             -- Xerox Job Control Language (JCL).
+                             -- A Job Control language originally
+                             -- developed for the LaserPress printers
+                             -- and is capable of switching PDLs.
+                             -- Technical reference manual:
+                             -- "ART IV Reference Manual", No F33M.
+                             -- Fuji Xerox Co., Ltd.
+        langPDF(54),         -- Not in RFC 1759
+                             -- Adobe Portable Document Format
+                             -- Adobe Systems, Inc.
+        langRPDL(55),        -- Not in RFC 1759
+                             -- Ricoh Page Description Language for
+                             -- printers.
+                             -- Technical manual "RPDL command
+                             -- reference" No.307029
+                             -- RICOH, Co. LTD
+        langIntermecIPL(56), -- Not in RFC 1759
+                             -- Intermec Printer Language for label
+                             -- printers.
+                             -- Technical Manual: "IPL Programmers
+                             -- Reference Manual"
+                             -- Intermec Corporation
+        langUBIFingerprint(57),  -- Not in RFC 1759
+                             -- An intelligent basic-like programming
+                             -- language for label printers.
+                             -- Reference Manual: "UBI Fingerprint
+                             -- 7.1", No. 1-960434-00
+                             -- United Barcode Industries
+        langUBIDirectProtocol(58),  -- Not in RFC 1759
+                             -- An intelligent control language for
+                             -- label printers.
+                             -- Programmers guide: " UBI Direct
+                             -- Protocol", No. 1-960419-00
+                             -- United Barcode Industries
+        langFujitsu(59),     -- Not in RFC 1759
+                             -- Fujitsu Printer Language
+                             -- Reference Manual:
+                             -- "FM Printer Sequence" No. 80HP-0770
+                             -- FUJITSU LIMITED
+        langCGM(60),         -- Not in RFC 1759
+                             -- Computer Graphics Metafile
+                             -- MIME type 'image/cgm'
+        langJPEG(61),        -- Not in RFC 1759
+                             -- Joint Photographic Experts Group
+                             -- MIME type 'image/jpeg'
+        langCALS1(62),       -- Not in RFC 1759
+                             -- US DOD CALS1 (see MIL-STD-1840)
+
+                             -- MIME type 'application/cals-1840'
+        langCALS2(63),       -- Not in RFC 1759
+                             -- US DOD CALS2 (see MIL-STD-1840)
+                             -- MIME type 'application/cals-1840'
+        langNIRS(64),        -- Not in RFC 1759
+                             -- US DOD NIRS (see MIL-STD-1840)
+                             -- MIME type 'application/cals-1840'
+        langC4(65),          -- Not in RFC 1759
+                             -- US DOD C4 (see MIL-STD-1840)
+                             -- MIME type 'application/cals-1840'
+        langXPS(66),         -- Not in RFC 3805
+                             -- Microsoft XML Paper Specification
+                             -- http://www.microsoft.com/whdc/xps/xpsspec
+        langOpenXPS(67),     -- Not in RFC 3805
+                             -- ECMA OpenXPS
+                             -- http://www.ecma-international.org/
+                             --   publications/standards/Ecma-388.htm
+        langJDF(68),         -- Not in RFC 3805
+                             -- CIP4 Job Definition Format
+                             -- http://www.cip4.org/documents/
+                             --   jdf_specifications/JDF1.4a.pdf
+        langJMF(69),         -- Not in RFC 3805
+                             -- CIP4 Job Messaging Format
+                             -- also defined in CIP4 JDF specification
+                             -- http://www.cip4.org/documents/
+                             --   jdf_specifications/JDF1.4a.pdf
+        langPPML(70),        -- Not in RFC 3805
+                             -- PODI Personalized Print Markup Language
+                             -- http://ppml.podi.org/ppml-docs/
+                             --   ppml-specifications.php
+        langXHTMLPrint(71),  -- Not in RFC 3805
+                             -- W3C XHTML-Print
+                             -- http://www.w3.org/TR/xhtml-print/
+        langPDFis(72),       -- Not in RFC 3805
+                             -- PWG PDF Image-Streamable (PWG 5102.3)
+                             -- ftp://pwg.org/pub/pwg/candidates/
+                             --   cs-ifxpdfis10-20040315-5102.3.pdf
+                             -- See also 'langPDF'
+        langPDF13(73),       -- Not in RFC 3805
+                             -- Adobe Portable Document Format v1.3
+                             -- http://www.adobe.com/devnet/
+                             --   pdf/pdfs/PDFReference13.pdf
+                             -- See also 'langPDF'
+        langPDF14(74),       -- Not in RFC 3805
+                             -- Adobe Portable Document Format v1.4
+                             -- http://www.adobe.com/devnet/
+                             --   pdf/pdfs/PDFReference.pdf
+                             -- See also 'langPDF'
+        langPDF15(75),       -- Not in RFC 3805
+                             -- Adobe Portable Document Format v1.5
+                             -- http://www.adobe.com/devnet/
+                             --   pdf/pdfs/PDFReference15_v5.pdf
+                             -- See also 'langPDF'
+        langPDF16(76),       -- Not in RFC 3805
+                             -- Adobe Portable Document Format v1.6
+                             -- http://www.adobe.com/devnet/
+                             --   pdf/pdfs/PDFReference16.pdf
+                             -- See also 'langPDF'
+        langPDF17(77),       -- Not in RFC 3805
+                             -- Adobe Portable Document Format v1.7
+                             -- http://www.adobe.com/devnet/
+                             --   acrobat/pdfs/pdf_reference_1-7.pdf
+                             -- Equivalent to ISO 32000-1:2008
+                             -- See also 'langPDF'
+        langPS2(78),         -- Not in RFC 3805
+                             -- Adobe PostScript Second Edition
+                             -- http://partners.adobe.com/public/
+                             --   developer/en/ps/psrefman.pdf
+                             -- See also 'langPS'
+        langPS3(79),         -- Not in RFC 3805
+                             -- Adobe PostScript Third Edition
+                             -- http://www.adobe.com/products/
+                             --   postscript/pdfs/PLRM.pdf
+                             -- See also 'langPS'
+        langPCL3(80),        -- Not in RFC 3805
+                             -- HP Printer Command Language 3
+                             -- No technical reference manual online
+                             -- See also 'langPCL'
+        langPCL3GUI(81),     -- Not in RFC 3805
+                             -- HP Printer Command Language 3 GUI
+                             -- No technical reference manual online
+                             -- See also 'langPCL'
+        langPCL5e(82),       -- Not in RFC 3805
+                             -- HP Printer Command Language 5 Enhanced
+                             -- http://h20000.www2.hp.com/bc/docs/
+                             --   support/SupportManual/bpl13210/
+                             --   bpl13210.pdf
+                             -- See also 'langPCL'
+        langPCL5c(83)        -- Not in RFC 3805
+                             -- HP Printer Command Language 5 Color
+                             -- http://h20000.www2.hp.com/bc/docs/
+                             --   support/SupportManual/bpl13212/
+                             --   bpl13212.pdf
+                             -- See also 'langPCL'
+}
+
+--
+-- Input/Output Group TEXTUAL-CONVENTIONs
+--
+
+PrtInputTypeTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtInputType in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The type of technology (discriminated primarily according to
+        feeder mechanism type) employed by a specific component or
+        components."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  sheetFeedAutoRemovableTray(3),
+                  sheetFeedAutoNonRemovableTray(4),
+                  sheetFeedManual(5),
+                  continuousRoll(6),
+                  continuousFanFold(7)
+                  }
+
+PrtOutputTypeTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtOutputType in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The Type of technology supported by this output subunit."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  removableBin(3),
+                  unRemovableBin(4),
+                  continuousRollDevice(5),
+                  mailBox(6),
+                  continuousFanFold(7)
+                  }
+
+--
+-- Marker Group TEXTUAL-CONVENTIONs
+--
+
+PrtMarkerMarkTechTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerMarkTech in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The type of marking technology used for this marking
+        subunit."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  electrophotographicLED(3),
+                  electrophotographicLaser(4),
+                  electrophotographicOther(5),
+                  impactMovingHeadDotMatrix9pin(6),
+                  impactMovingHeadDotMatrix24pin(7),
+                  impactMovingHeadDotMatrixOther(8),
+                  impactMovingHeadFullyFormed(9),
+                  impactBand(10),
+                  impactOther(11),
+                  inkjetAqueous(12),
+                  inkjetSolid(13),
+                  inkjetOther(14),
+                  pen(15),
+                  thermalTransfer(16),
+                  thermalSensitive(17),
+                  thermalDiffusion(18),
+                  thermalOther(19),
+                  electroerosion(20),
+                  electrostatic(21),
+                  photographicMicrofiche(22),
+                  photographicImagesetter(23),
+                  photographicOther(24),
+                  ionDeposition(25),
+                  eBeam(26),
+                  typesetter(27)
+                  }
+
+PrtMarkerSuppliesTypeTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerSuppliesType in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The type of this supply."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                -- Values for Printer MIB
+                  toner(3),
+                  wasteToner(4),
+                  ink(5),
+                  inkCartridge(6),
+                  inkRibbon(7),
+                  wasteInk(8),
+                  opc(9),               -- photo conductor
+                  developer(10),
+                  fuserOil(11),
+                  solidWax(12),
+                  ribbonWax(13),
+                  wasteWax(14),
+                  fuser(15),            -- Not in RFC 1759
+                  coronaWire(16),       -- Not in RFC 1759
+                  fuserOilWick(17),     -- Not in RFC 1759
+                  cleanerUnit(18),      -- Not in RFC 1759
+                  fuserCleaningPad(19), -- Not in RFC 1759
+                  transferUnit(20),     -- Not in RFC 1759
+                  tonerCartridge(21),   -- Not in RFC 1759
+                  fuserOiler(22),       -- Not in RFC 1759
+                -- End of values for Printer MIB
+                -- Values for Finisher MIB
+                  water(23),            -- Not in RFC 1759
+                  wasteWater(24),       -- Not in RFC 1759
+                  glueWaterAdditive(25),-- Not in RFC 1759
+                  wastePaper(26),       -- Not in RFC 1759
+                  bindingSupply(27),    -- Not in RFC 1759
+                  bandingSupply(28),    -- Not in RFC 1759
+                  stitchingWire(29),    -- Not in RFC 1759
+                  shrinkWrap(30),       -- Not in RFC 1759
+                  paperWrap(31),        -- Not in RFC 1759
+                  staples(32),          -- Not in RFC 1759
+                  inserts(33),          -- Not in RFC 1759
+                  covers(34)            -- Not in RFC 1759
+                -- End of values for Finisher MIB
+                  }
+
+--
+-- Media Path TEXTUAL-CONVENTIONs
+--
+
+PrtMediaPathTypeTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMediaPathType in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The type of the media path for this media path."
+    SYNTAX    INTEGER {
+
+                  other(1),
+                  unknown(2),
+                  longEdgeBindingDuplex(3),
+                  shortEdgeBindingDuplex(4),
+                  simplex(5)
+                  }
+
+--
+-- Console Group TEXTUAL-CONVENTIONs
+--
+
+PrtConsoleColorTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtConsoleColor in RFC 1759.
+    STATUS     current
+    DESCRIPTION
+        "The color of this light."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  white(3),
+                  red(4),
+                  green(5),
+                  blue(6),
+                  cyan(7),
+                  magenta(8),
+                  yellow(9),
+                  orange(10)        -- Not in RFC 1759
+                  }
+
+PrtConsoleDisableTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtConsoleDisable in RFC 1759.
+    STATUS     current
+    DESCRIPTION
+        "This value indicates whether or not input is accepted from
+        the operator console.  A value of 'enabled' indicates that
+        input is accepted from the console, and a value of 'disabled'
+        indicates that input is not accepted from the console. "
+    SYNTAX    INTEGER {
+                  enabled(3),
+                  disabled(4)
+                  }
+
+--
+-- Alert Group TEXTUAL-CONVENTIONs
+--
+
+PrtAlertTrainingLevelTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtAlertTrainingLevel in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The level of training required to handle this alert, if
+        human intervention is required.  The noInterventionRequired
+        value should be used if the event does not require any human
+        intervention.  The training level is an enumeration that is
+        determined and assigned by the printer manufacturer based on
+        the information or training required to handle this alert.
+        The printer will break alerts into these different training
+        levels.  It is the responsibility of a management application
+        in the system to determine how a particular alert is handled
+        and how and to whom that alert is routed.  The following are
+        the four training levels of alerts:
+
+        Field Service - Alerts that typically require advanced
+            training and technical knowledge of the printer and its
+            subunits.  An example of a technical person would be a
+            manufacturer's Field Service representative, or other
+            person formally trained by the manufacturer or similar
+            representative.
+        Trained - Alerts that require an intermediate or moderate
+            knowledge of the printer and its subunits.  A typical
+            example of such an alert is replacing a toner cartridge.
+        Untrained -     Alerts that can be fixed without prior
+            training either because the action to correct the alert
+            is obvious or the printer can help the untrained person
+            fix the problem.  A typical example of such an alert is
+            reloading paper trays or emptying output bins on a low
+            end printer.
+        Management -    Alerts that have to do with overall operation
+            of and configuration of the printer.  Examples of such
+            management events are configuration change of subunits."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                  untrained(3),
+                  trained(4),
+                  fieldService(5),
+                  management(6),
+                  noInterventionRequired(7)  -- Not in RFC 1759
+                 }
+
+PrtAlertGroupTC ::= TEXTUAL-CONVENTION
+    -- Values in the range 1 to 29 must not be IANA-assigned without
+    -- re-publishing Printer MIB.
+    -- Values of 30 and greater are for use in MIBs that augment
+    -- the Printer MIB, such as the Finisher MIB.
+    -- This TC extracted from prtAlertGroup in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The type of subunit within the printer model that this alert
+        is related.  Input, output, and markers are examples of
+        printer model groups, i.e., examples of types of subunits.
+        Wherever possible, the enumerations match the sub-identifier
+        that identifies the relevant table in the Printer MIB.
+
+        NOTE: Alert type codes have been added for the Host Resources
+        MIB storage table and device table.  These additional types
+        are for situations in which the printer's storage and device
+        objects must generate alerts (and possibly traps for critical
+        alerts)."
+    SYNTAX    INTEGER {
+                  other(1),
+                  unknown(2),
+                -- Values for Host Resources MIB
+                  hostResourcesMIBStorageTable(3),
+                  hostResourcesMIBDeviceTable(4),
+                -- Values for Printer MIB
+                  generalPrinter(5),
+                  cover(6),
+                  localization(7),
+                  input(8),
+                  output(9),
+                  marker(10),
+                  markerSupplies(11),
+                  markerColorant(12),
+                  mediaPath(13),
+                  channel(14),
+                  interpreter(15),
+                  consoleDisplayBuffer(16),
+                  consoleLights(17),
+                  alert(18),                   -- Not in RFC 1759
+                -- Values (5) to (29) reserved for Printer MIB
+                -- Values for Finisher MIB
+                  finDevice(30),               -- Not in RFC 1759
+                  finSupply(31),               -- Not in RFC 1759
+                  finSupplyMediaInput(32),     -- Not in RFC 1759
+                  finAttribute(33)             -- Not in RFC 1759
+                -- Values (30) to (39) reserved for Finisher MIB
+                  }
+
+PrtAlertCodeTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtAlertCode in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The code that describes the type of alert for this entry in
+
+        the table.  Binary change event alerts describe states of the
+        subunit while unary change event alerts describe a single
+        event.  The same alert code can be used for a binary change
+        event or a unary change event, depending on implementation.
+        Also, the same alert code can be used to indicate a critical
+        or non-critical (warning) alert, depending on implementation.
+        The value of prtAlertSeverityLevel specifies binary vs. unary
+        and critical vs. non-critical for each event for the
+        implementation.
+
+        While there are some specific codes for many subunits, the
+        generic codes should be used for most subunit alerts.  The
+        network management station can then query the subunit
+        specified by prtAlertGroup to determine further subunit
+        status and other subunit information.
+
+        An agent shall not add two entries to the alert table for the
+        same event, one containing a generic event code and the other
+        containing a specific event code; the agent shall add only
+        one entry in the alert table for each event; either generic
+        (preferred) or specific, not both.
+
+        Implementation of the unary change event
+        alertRemovalOfBinaryChangeEntry(1801) is optional.  When
+        implemented, this alert code shall indicate to network
+        management stations that the trailing edge of a binary change
+        event has occurred and the corresponding alert entry has been
+        removed from the alert table.  As with all events, the
+        alertRemovalOfBinaryChangeEntry(1801) alert shall be placed
+        at the end of the alert table.  Such an alert table entry
+        shall specify the following information:
+
+        prtAlertSeverityLevel   warningUnaryChangeEvent(4)
+        prtAlertTrainingLevel   noInterventionRequired(7)
+        prtAlertGroup           alert(18)
+        prtAlertGroupIndex      the index of the row in the
+                                alert table of the binary
+                                change event that this event
+                                has removed.
+        prtAlertLocation        unknown (-2)
+        prtAlertCode            alertRemovalOfBinaryChangeEntry(1801)
+        prtAlertDescription     <description or null string>
+        prtAlertTime            the value of sysUpTime at
+                                the time of the removal of the
+                                binary change event from the
+                                alert table.
+
+        Optionally, the agent may generate a trap coincident with
+
+        removing the binary change event and placing the unary change
+        event alertRemovalOfBinaryChangeEntry(1801) in the alert
+        table.  For such a trap, the prtAlertIndex sent with the above
+        trap parameters shall be the index of the
+        alertRemovalOfBinaryChangeEvent row that was added to the
+        prtAlertTable; not the index of the row that was removed from
+        the prtAlertTable."
+    SYNTAX    INTEGER {
+                  other(1),
+                      -- an event that is not represented
+                      -- by one of the alert codes
+                      -- specified below.
+                  unknown(2),
+                      -- The following generic codes are common to
+                      -- multiple groups.  The NMS may examine the
+                      -- prtAlertGroup object to determine what group
+                      -- to query for further information.
+                  coverOpen(3),
+                  coverClosed(4),
+                  interlockOpen(5),
+                  interlockClosed(6),
+                  configurationChange(7),
+                  jam(8),
+                  subunitMissing(9),           -- Not in RFC 1759
+                      -- The subunit tray, bin, etc.
+                      -- has been removed.
+                  subunitLifeAlmostOver(10),   -- Not in RFC 1759
+                  subunitLifeOver(11),         -- Not in RFC 1759
+                  subunitAlmostEmpty(12),      -- Not in RFC 1759
+                  subunitEmpty(13),            -- Not in RFC 1759
+                  subunitAlmostFull(14),       -- Not in RFC 1759
+                  subunitFull(15),             -- Not in RFC 1759
+                  subunitNearLimit(16),        -- Not in RFC 1759
+                  subunitAtLimit(17),          -- Not in RFC 1759
+                  subunitOpened(18),           -- Not in RFC 1759
+                  subunitClosed(19),           -- Not in RFC 1759
+                  subunitTurnedOn(20),         -- Not in RFC 1759
+                  subunitTurnedOff(21),        -- Not in RFC 1759
+                  subunitOffline(22),          -- Not in RFC 1759
+                  subunitPowerSaver(23),       -- Not in RFC 1759
+                  subunitWarmingUp(24),        -- Not in RFC 1759
+                  subunitAdded(25),            -- Not in RFC 1759
+                  subunitRemoved(26),          -- Not in RFC 1759
+                  subunitResourceAdded(27),    -- Not in RFC 1759
+                  subunitResourceRemoved(28),  -- Not in RFC 1759
+                  subunitRecoverableFailure(29),
+                                               -- Not in RFC 1759
+                  subunitUnrecoverableFailure(30),
+                                               -- Not in RFC 1759
+                  subunitRecoverableStorageError(31),
+                                               -- Not in RFC 1759
+                  subunitUnrecoverableStorageError(32),
+                                               -- Not in RFC 1759
+                  subunitMotorFailure(33),     -- Not in RFC 1759
+                  subunitMemoryExhausted(34),  -- Not in RFC 1759
+                  subunitUnderTemperature(35), -- Not in RFC 1759
+                  subunitOverTemperature(36),  -- Not in RFC 1759
+                  subunitTimingFailure(37),    -- Not in RFC 1759
+                  subunitThermistorFailure(38), -- Not in RFC 1759
+
+                -- General Printer group
+                  doorOpen(501),    -- DEPRECATED
+                                    -- Use coverOpened(3)
+                  doorClosed(502),  -- DEPRECATED
+                                    -- Use coverClosed(4)
+                  powerUp(503),
+                  powerDown(504),
+                  printerNMSReset(505),        -- Not in RFC 1759
+                      -- The printer has been reset by some
+                      -- network management station(NMS)
+                      -- writing into 'prtGeneralReset'.
+                  printerManualReset(506),     -- Not in RFC 1759
+                      -- The printer has been reset manually.
+                  printerReadyToPrint(507),    -- Not in RFC 1759
+                      -- The printer is ready to print. (i.e.,
+                      -- not warming up, not in power save
+                      -- state, not adjusting print quality,
+                      -- etc.).
+
+                -- Input Group
+                  inputMediaTrayMissing(801),
+                  inputMediaSizeChange(802),
+                  inputMediaWeightChange(803),
+                  inputMediaTypeChange(804),
+                  inputMediaColorChange(805),
+                  inputMediaFormPartsChange(806),
+                  inputMediaSupplyLow(807),
+                  inputMediaSupplyEmpty(808),
+                  inputMediaChangeRequest(809), -- Not in RFC 1759
+                      -- An interpreter has detected that a
+                      -- different medium is need in this input
+                      -- tray subunit.  The prtAlertDescription may
+                      -- be used to convey a human readable
+                      -- description of the medium required to
+                      -- satisfy the request.
+                  inputManualInputRequest(810), -- Not in RFC 1759
+
+                      -- An interpreter has detected that manual
+                      -- input is required in this subunit.  The
+                      -- prtAlertDescription may be used to convey
+                      -- a human readable description of the medium
+                      -- required to satisfy the request.
+                  inputTrayPositionFailure(811), -- Not in RFC 1759
+                      -- The input tray failed to position correctly.
+                  inputTrayElevationFailure(812),
+                                        -- Not in RFC 1759
+                  inputCannotFeedSizeSelected(813),
+                                        -- Not in RFC 1759
+                -- Output Group
+                  outputMediaTrayMissing(901),
+                  outputMediaTrayAlmostFull(902),
+                  outputMediaTrayFull(903),
+                  outputMailboxSelectFailure(904),
+                                        -- Not in RFC 1759
+                -- Marker group
+                  markerFuserUnderTemperature(1001),
+                  markerFuserOverTemperature(1002),
+                  markerFuserTimingFailure(1003),
+                                        -- Not in RFC 1759
+                  markerFuserThermistorFailure(1004),
+                                        -- Not in RFC 1759
+                  markerAdjustingPrintQuality(1005),
+                                        -- Not in RFC 1759
+                -- Marker Supplies group
+                  markerTonerEmpty(1101),
+                  markerInkEmpty(1102),
+                  markerPrintRibbonEmpty(1103),
+                  markerTonerAlmostEmpty(1104),
+                  markerInkAlmostEmpty(1105),
+                  markerPrintRibbonAlmostEmpty(1106),
+                  markerWasteTonerReceptacleAlmostFull(1107),
+                  markerWasteInkReceptacleAlmostFull(1108),
+                  markerWasteTonerReceptacleFull(1109),
+                  markerWasteInkReceptacleFull(1110),
+                  markerOpcLifeAlmostOver(1111),
+                  markerOpcLifeOver(1112),
+                  markerDeveloperAlmostEmpty(1113),
+                  markerDeveloperEmpty(1114),
+                  markerTonerCartridgeMissing(1115),
+                                        -- Not in RFC 1759
+                -- Media Path Device Group
+                  mediaPathMediaTrayMissing(1301),
+                  mediaPathMediaTrayAlmostFull(1302),
+                  mediaPathMediaTrayFull(1303),
+                  mediaPathCannotDuplexMediaSelected(1304),
+                                        -- Not in RFC 1759
+                -- Interpreter Group
+                  interpreterMemoryIncrease(1501),
+                  interpreterMemoryDecrease(1502),
+                  interpreterCartridgeAdded(1503),
+                  interpreterCartridgeDeleted(1504),
+                  interpreterResourceAdded(1505),
+                  interpreterResourceDeleted(1506),
+                  interpreterResourceUnavailable(1507),
+                  interpreterComplexPageEncountered(1509),
+                                        -- Not in RFC 1759
+                      -- The interpreter has encountered a page
+                      -- that is too complex for the resources that
+                      -- are available.
+                -- Alert Group
+                  alertRemovalOfBinaryChangeEntry(1801),
+                                        -- Not in RFC 1759
+                      -- A binary change event entry has been
+                      -- removed from the alert table.  This unary
+                      -- change alert table entry is added to the
+                      -- end of the alert table.
+                      -- FinDeviceTypeTC = stitcher(3) -> stapler
+                      -- FinStitchingTypeTC = staple... (4,5,6,7, or 10)
+                  staplerCoverOpen(30203),
+                  staplerCoverClosed(30204),
+                  staplerInterlockOpen(30205),
+                  staplerInterlockClosed(30206),
+                  staplerConfigurationChange(30207),
+                  staplerJam(30208),
+                  staplerMissing(30209),
+                  staplerLifeAlmostOver(30210),
+                  staplerLifeOver(30211),
+                  staplerAlmostEmpty(30212),
+                  staplerEmpty(30213),
+                  staplerAlmostFull(30214),
+                  staplerFull(30215),
+                  staplerNearLimit(30216),
+                  staplerAtLimit(30217),
+                  staplerOpened(30218),
+                  staplerClosed(30219),
+                  staplerTurnedOn(30220),
+                  staplerTurnedOff(30221),
+                  staplerOffline(30222),
+                  staplerPowerSaver(30223),
+                  staplerWarmingUp(30224),
+                  staplerAdded(30225),
+                  staplerRemoved(30226),
+                  staplerResourceAdded(30227),
+                  staplerResourceRemoved(30228),
+                  staplerRecoverableFailure(30229),
+                  staplerUnrecoverableFailure(30230),
+                  staplerRecoverableStorageError(30231),
+                  staplerUnrecoverableStorageError(30232),
+                  staplerMotorFailure(30233),
+                  staplerMemoryExhausted(30234),
+                  staplerUnderTemperature(30235),
+                  staplerOverTemperature(30236),
+                  staplerTimingFailure(30237),
+                  staplerThermistorFailure(30238),
+                  -- FinDeviceTypeTC = stitcher(3) -> stitcher
+                  -- FinStitchingTypeTC = saddleStitch(8) or edgeStitch(9)
+                  stitcherCoverOpen(30303),
+                  stitcherCoverClosed(30304),
+                  stitcherInterlockOpen(30305),
+                  stitcherInterlockClosed(30306),
+                  stitcherConfigurationChange(30307),
+                  stitcherJam(30308),
+                  stitcherMissing(30309),
+                  stitcherLifeAlmostOver(30310),
+                  stitcherLifeOver(30311),
+                  stitcherAlmostEmpty(30312),
+                  stitcherEmpty(30313),
+                  stitcherAlmostFull(30314),
+                  stitcherFull(30315),
+                  stitcherNearLimit(30316),
+                  stitcherAtLimit(30317),
+                  stitcherOpened(30318),
+                  stitcherClosed(30319),
+                  stitcherTurnedOn(30320),
+                  stitcherTurnedOff(30321),
+                  stitcherOffline(30322),
+                  stitcherPowerSaver(30323),
+                  stitcherWarmingUp(30324),
+                  stitcherAdded(30325),
+                  stitcherRemoved(30326),
+                  stitcherResourceAdded(30327),
+                  stitcherResourceRemoved(30328),
+                  stitcherRecoverableFailure(30329),
+                  stitcherUnrecoverableFailure(30330),
+                  stitcherRecoverableStorageError(30331),
+                  stitcherUnrecoverableStorageError(30332),
+                  stitcherMotorFailure(30333),
+                  stitcherMemoryExhausted(30334),
+                  stitcherUnderTemperature(30335),
+                  stitcherOverTemperature(30336),
+                  stitcherTimingFailure(30337),
+                  stitcherThermistorFailure(30338),
+                  -- FinDeviceTypeTC = folder(4)
+                  folderCoverOpen(30403),
+                  folderCoverClosed(30404),
+                  folderInterlockOpen(30405),
+                  folderInterlockClosed(30406),
+                  folderConfigurationChange(30407),
+                  folderJam(30408),
+                  folderMissing(30409),
+                  folderLifeAlmostOver(30410),
+                  folderLifeOver(30411),
+                  folderAlmostEmpty(30412),
+                  folderEmpty(30413),
+                  folderAlmostFull(30414),
+                  folderFull(30415),
+                  folderNearLimit(30416),
+                  folderAtLimit(30417),
+                  folderOpened(30418),
+                  folderClosed(30419),
+                  folderTurnedOn(30420),
+                  folderTurnedOff(30421),
+                  folderOffline(30422),
+                  folderPowerSaver(30423),
+                  folderWarmingUp(30424),
+                  folderAdded(30425),
+                  folderRemoved(30426),
+                  folderResourceAdded(30427),
+                  folderResourceRemoved(30428),
+                  folderRecoverableFailure(30429),
+                  folderUnrecoverableFailure(30430),
+                  folderRecoverableStorageError(30431),
+                  folderUnrecoverableStorageError(30432),
+                  folderMotorFailure(30433),
+                  folderMemoryExhausted(30434),
+                  folderUnderTemperature(30435),
+                  folderOverTemperature(30436),
+                  folderTimingFailure(30437),
+                  folderThermistorFailure(30438),
+                  -- FinDeviceTypeTC = binder(5)
+                  binderCoverOpen(30503),
+                  binderCoverClosed(30504),
+                  binderInterlockOpen(30505),
+                  binderInterlockClosed(30506),
+                  binderConfigurationChange(30507),
+                  binderJam(30508),
+                  binderMissing(30509),
+                  binderLifeAlmostOver(30510),
+                  binderLifeOver(30511),
+                  binderAlmostEmpty(30512),
+                  binderEmpty(30513),
+                  binderAlmostFull(30514),
+                  binderFull(30515),
+                  binderNearLimit(30516),
+                  binderAtLimit(30517),
+                  binderOpened(30518),
+                  binderClosed(30519),
+                  binderTurnedOn(30520),
+                  binderTurnedOff(30521),
+                  binderOffline(30522),
+                  binderPowerSaver(30523),
+                  binderWarmingUp(30524),
+                  binderAdded(30525),
+                  binderRemoved(30526),
+                  binderResourceAdded(30527),
+                  binderResourceRemoved(30528),
+                  binderRecoverableFailure(30529),
+                  binderUnrecoverableFailure(30530),
+                  binderRecoverableStorageError(30531),
+                  binderUnrecoverableStorageError(30532),
+                  binderMotorFailure(30533),
+                  binderMemoryExhausted(30534),
+                  binderUnderTemperature(30535),
+                  binderOverTemperature(30536),
+                  binderTimingFailure(30537),
+                  binderThermistorFailure(30538),
+                  -- FinDeviceTypeTC = trimmer(6)
+                  trimmerCoverOpen(30603),
+                  trimmerCoverClosed(30604),
+                  trimmerInterlockOpen(30605),
+                  trimmerInterlockClosed(30606),
+                  trimmerConfigurationChange(30607),
+                  trimmerJam(30608),
+                  trimmerMissing(30609),
+                  trimmerLifeAlmostOver(30610),
+                  trimmerLifeOver(30611),
+                  trimmerAlmostEmpty(30612),
+                  trimmerEmpty(30613),
+                  trimmerAlmostFull(30614),
+                  trimmerFull(30615),
+                  trimmerNearLimit(30616),
+                  trimmerAtLimit(30617),
+                  trimmerOpened(30618),
+                  trimmerClosed(30619),
+                  trimmerTurnedOn(30620),
+                  trimmerTurnedOff(30621),
+                  trimmerOffline(30622),
+                  trimmerPowerSaver(30623),
+                  trimmerWarmingUp(30624),
+                  trimmerAdded(30625),
+                  trimmerRemoved(30626),
+                  trimmerResourceAdded(30627),
+                  trimmerResourceRemoved(30628),
+                  trimmerRecoverableFailure(30629),
+                  trimmerUnrecoverableFailure(30630),
+                  trimmerRecoverableStorageError(30631),
+                  trimmerUnrecoverableStorageError(30632),
+                  trimmerMotorFailure(30633),
+                  trimmerMemoryExhausted(30634),
+                  trimmerUnderTemperature(30635),
+                  trimmerOverTemperature(30636),
+                  trimmerTimingFailure(30637),
+                  trimmerThermistorFailure(30638),
+                  -- FinDeviceTypeTC = dieCutter(7)
+                  dieCutterCoverOpen(30703),
+                  dieCutterCoverClosed(30704),
+                  dieCutterInterlockOpen(30705),
+                  dieCutterInterlockClosed(30706),
+                  dieCutterConfigurationChange(30707),
+                  dieCutterJam(30708),
+                  dieCutterMissing(30709),
+                  dieCutterLifeAlmostOver(30710),
+                  dieCutterLifeOver(30711),
+                  dieCutterAlmostEmpty(30712),
+                  dieCutterEmpty(30713),
+                  dieCutterAlmostFull(30714),
+                  dieCutterFull(30715),
+                  dieCutterNearLimit(30716),
+                  dieCutterAtLimit(30717),
+                  dieCutterOpened(30718),
+                  dieCutterClosed(30719),
+                  dieCutterTurnedOn(30720),
+                  dieCutterTurnedOff(30721),
+                  dieCutterOffline(30722),
+                  dieCutterPowerSaver(30723),
+                  dieCutterWarmingUp(30724),
+                  dieCutterAdded(30725),
+                  dieCutterRemoved(30726),
+                  dieCutterResourceAdded(30727),
+                  dieCutterResourceRemoved(30728),
+                  dieCutterRecoverableFailure(30729),
+                  dieCutterUnrecoverableFailure(30730),
+                  dieCutterRecoverableStorageError(30731),
+                  dieCutterUnrecoverableStorageError(30732),
+                  dieCutterMotorFailure(30733),
+                  dieCutterMemoryExhausted(30734),
+                  dieCutterUnderTemperature(30735),
+                  dieCutterOverTemperature(30736),
+                  dieCutterTimingFailure(30737),
+                  dieCutterThermistorFailure(30738),
+                  -- FinDeviceTypeTC = puncher(8)
+                  puncherCoverOpen(30803),
+                  puncherCoverClosed(30804),
+                  puncherInterlockOpen(30805),
+                  puncherInterlockClosed(30806),
+                  puncherConfigurationChange(30807),
+                  puncherJam(30808),
+                  puncherMissing(30809),
+                  puncherLifeAlmostOver(30810),
+                  puncherLifeOver(30811),
+                  puncherAlmostEmpty(30812),
+                  puncherEmpty(30813),
+                  puncherAlmostFull(30814),
+                  puncherFull(30815),
+                  puncherNearLimit(30816),
+                  puncherAtLimit(30817),
+                  puncherOpened(30818),
+                  puncherClosed(30819),
+                  puncherTurnedOn(30820),
+                  puncherTurnedOff(30821),
+                  puncherOffline(30822),
+                  puncherPowerSaver(30823),
+                  puncherWarmingUp(30824),
+                  puncherAdded(30825),
+                  puncherRemoved(30826),
+                  puncherResourceAdded(30827),
+                  puncherResourceRemoved(30828),
+                  puncherRecoverableFailure(30829),
+                  puncherUnrecoverableFailure(30830),
+                  puncherRecoverableStorageError(30831),
+                  puncherUnrecoverableStorageError(30832),
+                  puncherMotorFailure(30833),
+                  puncherMemoryExhausted(30834),
+                  puncherUnderTemperature(30835),
+                  puncherOverTemperature(30836),
+                  puncherTimingFailure(30837),
+                  puncherThermistorFailure(30838),
+                  -- FinDeviceTypeTC = perforater(9)
+                  perforaterCoverOpen(30903),
+                  perforaterCoverClosed(30904),
+                  perforaterInterlockOpen(30905),
+                  perforaterInterlockClosed(30906),
+                  perforaterConfigurationChange(30907),
+                  perforaterJam(30908),
+                  perforaterMissing(30909),
+                  perforaterLifeAlmostOver(30910),
+                  perforaterLifeOver(30911),
+                  perforaterAlmostEmpty(30912),
+                  perforaterEmpty(30913),
+                  perforaterAlmostFull(30914),
+                  perforaterFull(30915),
+                  perforaterNearLimit(30916),
+                  perforaterAtLimit(30917),
+                  perforaterOpened(30918),
+                  perforaterClosed(30919),
+                  perforaterTurnedOn(30920),
+                  perforaterTurnedOff(30921),
+                  perforaterOffline(30922),
+                  perforaterPowerSaver(30923),
+                  perforaterWarmingUp(30924),
+                  perforaterAdded(30925),
+                  perforaterRemoved(30926),
+                  perforaterResourceAdded(30927),
+                  perforaterResourceRemoved(30928),
+                  perforaterRecoverableFailure(30929),
+                  perforaterUnrecoverableFailure(30930),
+                  perforaterRecoverableStorageError(30931),
+                  perforaterUnrecoverableStorageError(30932),
+                  perforaterMotorFailure(30933),
+                  perforaterMemoryExhausted(30934),
+                  perforaterUnderTemperature(30935),
+                  perforaterOverTemperature(30936),
+                  perforaterTimingFailure(30937),
+                  perforaterThermistorFailure(30938),
+                  -- FinDeviceTypeTC = slitter(10)
+                  slitterCoverOpen(31003),
+                  slitterCoverClosed(31004),
+                  slitterInterlockOpen(31005),
+                  slitterInterlockClosed(31006),
+                  slitterConfigurationChange(31007),
+                  slitterJam(31008),
+                  slitterMissing(31009),
+                  slitterLifeAlmostOver(31010),
+                  slitterLifeOver(31011),
+                  slitterAlmostEmpty(31012),
+                  slitterEmpty(31013),
+                  slitterAlmostFull(31014),
+                  slitterFull(31015),
+                  slitterNearLimit(31016),
+                  slitterAtLimit(31017),
+                  slitterOpened(31018),
+                  slitterClosed(31019),
+                  slitterTurnedOn(31020),
+                  slitterTurnedOff(31021),
+                  slitterOffline(31022),
+                  slitterPowerSaver(31023),
+                  slitterWarmingUp(31024),
+                  slitterAdded(31025),
+                  slitterRemoved(31026),
+                  slitterResourceAdded(31027),
+                  slitterResourceRemoved(31028),
+                  slitterRecoverableFailure(31029),
+                  slitterUnrecoverableFailure(31030),
+                  slitterRecoverableStorageError(31031),
+                  slitterUnrecoverableStorageError(31032),
+                  slitterMotorFailure(31033),
+                  slitterMemoryExhausted(31034),
+                  slitterUnderTemperature(31035),
+                  slitterOverTemperature(31036),
+                  slitterTimingFailure(31037),
+                  slitterThermistorFailure(31038),
+                  -- FinDeviceTypeTC = separationCutter(11)
+                  separationCutterCoverOpen(31103),
+                  separationCutterCoverClosed(31104),
+                  separationCutterInterlockOpen(31105),
+                  separationCutterInterlockClosed(31106),
+                  separationCutterConfigurationChange(31107),
+                  separationCutterJam(31108),
+                  separationCutterMissing(31109),
+                  separationCutterLifeAlmostOver(31110),
+                  separationCutterLifeOver(31111),
+                  separationCutterAlmostEmpty(31112),
+                  separationCutterEmpty(31113),
+                  separationCutterAlmostFull(31114),
+                  separationCutterFull(31115),
+                  separationCutterNearLimit(31116),
+                  separationCutterAtLimit(31117),
+                  separationCutterOpened(31118),
+                  separationCutterClosed(31119),
+                  separationCutterTurnedOn(31120),
+                  separationCutterTurnedOff(31121),
+                  separationCutterOffline(31122),
+                  separationCutterPowerSaver(31123),
+                  separationCutterWarmingUp(31124),
+                  separationCutterAdded(31125),
+                  separationCutterRemoved(31126),
+                  separationCutterResourceAdded(31127),
+                  separationCutterResourceRemoved(31128),
+                  separationCutterRecoverableFailure(31129),
+                  separationCutterUnrecoverableFailure(31130),
+                  separationCutterRecoverableStorageError(31131),
+                  separationCutterUnrecoverableStorageError(31132),
+                  separationCutterMotorFailure(31133),
+                  separationCutterMemoryExhausted(31134),
+                  separationCutterUnderTemperature(31135),
+                  separationCutterOverTemperature(31136),
+                  separationCutterTimingFailure(31137),
+                  separationCutterThermistorFailure(31138),
+                  -- FinDeviceTypeTC = imprinter(12)
+                  imprinterCoverOpen(31203),
+                  imprinterCoverClosed(31204),
+                  imprinterInterlockOpen(31205),
+                  imprinterInterlockClosed(31206),
+                  imprinterConfigurationChange(31207),
+                  imprinterJam(31208),
+                  imprinterMissing(31209),
+                  imprinterLifeAlmostOver(31210),
+                  imprinterLifeOver(31211),
+                  imprinterAlmostEmpty(31212),
+                  imprinterEmpty(31213),
+                  imprinterAlmostFull(31214),
+                  imprinterFull(31215),
+                  imprinterNearLimit(31216),
+                  imprinterAtLimit(31217),
+                  imprinterOpened(31218),
+                  imprinterClosed(31219),
+                  imprinterTurnedOn(31220),
+                  imprinterTurnedOff(31221),
+                  imprinterOffline(31222),
+                  imprinterPowerSaver(31223),
+                  imprinterWarmingUp(31224),
+                  imprinterAdded(31225),
+                  imprinterRemoved(31226),
+                  imprinterResourceAdded(31227),
+                  imprinterResourceRemoved(31228),
+                  imprinterRecoverableFailure(31229),
+                  imprinterUnrecoverableFailure(31230),
+                  imprinterRecoverableStorageError(31231),
+                  imprinterUnrecoverableStorageError(31232),
+                  imprinterMotorFailure(31233),
+                  imprinterMemoryExhausted(31234),
+                  imprinterUnderTemperature(31235),
+                  imprinterOverTemperature(31236),
+                  imprinterTimingFailure(31237),
+                  imprinterThermistorFailure(31238),
+                  -- FinDeviceTypeTC = wrapper(13)
+                  wrapperCoverOpen(31303),
+                  wrapperCoverClosed(31304),
+                  wrapperInterlockOpen(31305),
+                  wrapperInterlockClosed(31306),
+                  wrapperConfigurationChange(31307),
+                  wrapperJam(31308),
+                  wrapperMissing(31309),
+                  wrapperLifeAlmostOver(31310),
+                  wrapperLifeOver(31311),
+                  wrapperAlmostEmpty(31312),
+                  wrapperEmpty(31313),
+                  wrapperAlmostFull(31314),
+                  wrapperFull(31315),
+                  wrapperNearLimit(31316),
+                  wrapperAtLimit(31317),
+                  wrapperOpened(31318),
+                  wrapperClosed(31319),
+                  wrapperTurnedOn(31320),
+                  wrapperTurnedOff(31321),
+                  wrapperOffline(31322),
+                  wrapperPowerSaver(31323),
+                  wrapperWarmingUp(31324),
+                  wrapperAdded(31325),
+                  wrapperRemoved(31326),
+                  wrapperResourceAdded(31327),
+                  wrapperResourceRemoved(31328),
+                  wrapperRecoverableFailure(31329),
+                  wrapperUnrecoverableFailure(31330),
+                  wrapperRecoverableStorageError(31331),
+                  wrapperUnrecoverableStorageError(31332),
+                  wrapperMotorFailure(31333),
+                  wrapperMemoryExhausted(31334),
+                  wrapperUnderTemperature(31335),
+                  wrapperOverTemperature(31336),
+                  wrapperTimingFailure(31337),
+                  wrapperThermistorFailure(31338),
+                  -- FinDeviceTypeTC = bander(14)
+                  banderCoverOpen(31403),
+                  banderCoverClosed(31404),
+                  banderInterlockOpen(31405),
+                  banderInterlockClosed(31406),
+                  banderConfigurationChange(31407),
+                  banderJam(31408),
+                  banderMissing(31409),
+                  banderLifeAlmostOver(31410),
+                  banderLifeOver(31411),
+                  banderAlmostEmpty(31412),
+                  banderEmpty(31413),
+                  banderAlmostFull(31414),
+                  banderFull(31415),
+                  banderNearLimit(31416),
+                  banderAtLimit(31417),
+                  banderOpened(31418),
+                  banderClosed(31419),
+                  banderTurnedOn(31420),
+                  banderTurnedOff(31421),
+                  banderOffline(31422),
+                  banderPowerSaver(31423),
+                  banderWarmingUp(31424),
+                  banderAdded(31425),
+                  banderRemoved(31426),
+                  banderResourceAdded(31427),
+                  banderResourceRemoved(31428),
+                  banderRecoverableFailure(31429),
+                  banderUnrecoverableFailure(31430),
+                  banderRecoverableStorageError(31431),
+                  banderUnrecoverableStorageError(31432),
+                  banderMotorFailure(31433),
+                  banderMemoryExhausted(31434),
+                  banderUnderTemperature(31435),
+                  banderOverTemperature(31436),
+                  banderTimingFailure(31437),
+                  banderThermistorFailure(31438),
+                  -- FinDeviceTypeTC = makeEnvelope(15)
+                  makeEnvelopeCoverOpen(31503),
+                  makeEnvelopeCoverClosed(31504),
+                  makeEnvelopeInterlockOpen(31505),
+                  makeEnvelopeInterlockClosed(31506),
+                  makeEnvelopeConfigurationChange(31507),
+                  makeEnvelopeJam(31508),
+                  makeEnvelopeMissing(31509),
+                  makeEnvelopeLifeAlmostOver(31510),
+                  makeEnvelopeLifeOver(31511),
+                  makeEnvelopeAlmostEmpty(31512),
+                  makeEnvelopeEmpty(31513),
+                  makeEnvelopeAlmostFull(31514),
+                  makeEnvelopeFull(31515),
+                  makeEnvelopeNearLimit(31516),
+                  makeEnvelopeAtLimit(31517),
+                  makeEnvelopeOpened(31518),
+                  makeEnvelopeClosed(31519),
+                  makeEnvelopeTurnedOn(31520),
+                  makeEnvelopeTurnedOff(31521),
+                  makeEnvelopeOffline(31522),
+                  makeEnvelopePowerSaver(31523),
+                  makeEnvelopeWarmingUp(31524),
+                  makeEnvelopeAdded(31525),
+                  makeEnvelopeRemoved(31526),
+                  makeEnvelopeResourceAdded(31527),
+                  makeEnvelopeResourceRemoved(31528),
+                  makeEnvelopeRecoverableFailure(31529),
+                  makeEnvelopeUnrecoverableFailure(31530),
+                  makeEnvelopeRecoverableStorageError(31531),
+                  makeEnvelopeUnrecoverableStorageError(31532),
+                  makeEnvelopeMotorFailure(31533),
+                  makeEnvelopeMemoryExhausted(31534),
+                  makeEnvelopeUnderTemperature(31535),
+                  makeEnvelopeOverTemperature(31536),
+                  makeEnvelopeTimingFailure(31537),
+                  makeEnvelopeThermistorFailure(31538),
+                  -- FinDeviceTypeTC = stacker(16)
+                  stackerCoverOpen(31603),
+                  stackerCoverClosed(31604),
+                  stackerInterlockOpen(31605),
+                  stackerInterlockClosed(31606),
+                  stackerConfigurationChange(31607),
+                  stackerJam(31608),
+                  stackerMissing(31609),
+                  stackerLifeAlmostOver(31610),
+                  stackerLifeOver(31611),
+                  stackerAlmostEmpty(31612),
+                  stackerEmpty(31613),
+                  stackerAlmostFull(31614),
+                  stackerFull(31615),
+                  stackerNearLimit(31616),
+                  stackerAtLimit(31617),
+                  stackerOpened(31618),
+                  stackerClosed(31619),
+                  stackerTurnedOn(31620),
+                  stackerTurnedOff(31621),
+                  stackerOffline(31622),
+                  stackerPowerSaver(31623),
+                  stackerWarmingUp(31624),
+                  stackerAdded(31625),
+                  stackerRemoved(31626),
+                  stackerResourceAdded(31627),
+                  stackerResourceRemoved(31628),
+                  stackerRecoverableFailure(31629),
+                  stackerUnrecoverableFailure(31630),
+                  stackerRecoverableStorageError(31631),
+                  stackerUnrecoverableStorageError(31632),
+                  stackerMotorFailure(31633),
+                  stackerMemoryExhausted(31634),
+                  stackerUnderTemperature(31635),
+                  stackerOverTemperature(31636),
+                  stackerTimingFailure(31637),
+                  stackerThermistorFailure(31638),
+                  -- FinDeviceTypeTC = sheetRotator(17)
+                  sheetRotatorCoverOpen(31703),
+                  sheetRotatorCoverClosed(31704),
+                  sheetRotatorInterlockOpen(31705),
+                  sheetRotatorInterlockClosed(31706),
+                  sheetRotatorConfigurationChange(31707),
+                  sheetRotatorJam(31708),
+                  sheetRotatorMissing(31709),
+                  sheetRotatorLifeAlmostOver(31710),
+                  sheetRotatorLifeOver(31711),
+                  sheetRotatorAlmostEmpty(31712),
+                  sheetRotatorEmpty(31713),
+                  sheetRotatorAlmostFull(31714),
+                  sheetRotatorFull(31715),
+                  sheetRotatorNearLimit(31716),
+                  sheetRotatorAtLimit(31717),
+                  sheetRotatorOpened(31718),
+                  sheetRotatorClosed(31719),
+                  sheetRotatorTurnedOn(31720),
+                  sheetRotatorTurnedOff(31721),
+                  sheetRotatorOffline(31722),
+                  sheetRotatorPowerSaver(31723),
+                  sheetRotatorWarmingUp(31724),
+                  sheetRotatorAdded(31725),
+                  sheetRotatorRemoved(31726),
+                  sheetRotatorResourceAdded(31727),
+                  sheetRotatorResourceRemoved(31728),
+                  sheetRotatorRecoverableFailure(31729),
+                  sheetRotatorUnrecoverableFailure(31730),
+                  sheetRotatorRecoverableStorageError(31731),
+                  sheetRotatorUnrecoverableStorageError(31732),
+                  sheetRotatorMotorFailure(31733),
+                  sheetRotatorMemoryExhausted(31734),
+                  sheetRotatorUnderTemperature(31735),
+                  sheetRotatorOverTemperature(31736),
+                  sheetRotatorTimingFailure(31737),
+                  sheetRotatorThermistorFailure(31738),
+                  -- FinDeviceTypeTC = inserter(18)
+                  inserterCoverOpen(31803),
+                  inserterCoverClosed(31804),
+                  inserterInterlockOpen(31805),
+                  inserterInterlockClosed(31806),
+                  inserterConfigurationChange(31807),
+                  inserterJam(31808),
+                  inserterMissing(31809),
+                  inserterLifeAlmostOver(31810),
+                  inserterLifeOver(31811),
+                  inserterAlmostEmpty(31812),
+                  inserterEmpty(31813),
+                  inserterAlmostFull(31814),
+                  inserterFull(31815),
+                  inserterNearLimit(31816),
+                  inserterAtLimit(31817),
+                  inserterOpened(31818),
+                  inserterClosed(31819),
+                  inserterTurnedOn(31820),
+                  inserterTurnedOff(31821),
+                  inserterOffline(31822),
+                  inserterPowerSaver(31823),
+                  inserterWarmingUp(31824),
+                  inserterAdded(31825),
+                  inserterRemoved(31826),
+                  inserterResourceAdded(31827),
+                  inserterResourceRemoved(31828),
+                  inserterRecoverableFailure(31829),
+                  inserterUnrecoverableFailure(31830),
+                  inserterRecoverableStorageError(31831),
+                  inserterUnrecoverableStorageError(31832),
+                  inserterMotorFailure(31833),
+                  inserterMemoryExhausted(31834),
+                  inserterUnderTemperature(31835),
+                  inserterOverTemperature(31836),
+                  inserterTimingFailure(31837),
+                  inserterThermistorFailure(31838)
+                  }
+END
diff --git a/snmp_builder/mibs/IANA-PWE3-MIB.mib b/snmp_builder/mibs/IANA-PWE3-MIB.mib
new file mode 100644
index 0000000..5bf410f
--- /dev/null
+++ b/snmp_builder/mibs/IANA-PWE3-MIB.mib
@@ -0,0 +1,137 @@
+IANA-PWE3-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2
+       FROM SNMPv2-SMI -- [RFC2578]
+
+    TEXTUAL-CONVENTION
+       FROM SNMPv2-TC; -- [RFC2579]
+
+ianaPwe3MIB  MODULE-IDENTITY
+    LAST-UPDATED "200906110000Z"  -- 11 June 2009 00:00:00 GMT
+    ORGANIZATION "IANA"
+    CONTACT-INFO
+         "Internet Assigned Numbers Authority
+         Internet Corporation for Assigned Names and Numbers
+         4676 Admiralty Way, Suite 330
+         Marina del Rey, CA 90292-6601
+
+         Phone: +1 310 823 9358
+         EMail: iana@iana.org"
+    DESCRIPTION
+        "This MIB module defines the IANAPwTypeTC and
+        IANAPwPsnTypeTC textual conventions for use in PWE3
+        MIB modules.
+
+        Any additions or changes to the contents of this MIB
+        module require either publication of an RFC, Designated
+        Expert Review as defined in RFC 5226, Guidelines for
+        Writing an IANA Considerations Section in RFCs, and should
+        be based on the procedures defined in [RFC4446].  The
+        Designated Expert will be selected by the IESG Area
+        Director(s) of the internet Area.
+
+        Copyright (c) 2009 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, are permitted provided that the
+
+        following conditions are met:
+
+        - Redistributions of source code must retain the above
+          copyright notice, this list of conditions and the
+          following disclaimer.
+
+        - Redistributions in binary form must reproduce the above
+          copyright notice, this list of conditions and the
+          following disclaimer in the documentation and/or other
+          materials provided with the distribution.
+
+        - Neither the name of Internet Society, IETF or IETF Trust,
+          nor the names of specific contributors, may be used to
+          endorse or promote products derived from this software
+          without specific prior written permission.
+
+        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+        CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+        INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+        MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+        DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+        CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+        INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+        (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+        GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+        BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+        LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+        (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+        OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+        POSSIBILITY OF SUCH DAMAGE. "
+
+    REVISION     "200906110000Z"  -- 11 June 2009 00:00:00 GMT
+    DESCRIPTION  "Original version, published as part of RFC 5601."
+    ::= { mib-2 174 }
+
+IANAPwTypeTC ::= TEXTUAL-CONVENTION
+   STATUS     current
+   DESCRIPTION
+      "Indicates the PW type (i.e., the carried service). "
+ SYNTAX   INTEGER {
+    other(0),
+    frameRelayDlciMartiniMode(1),
+    atmAal5SduVcc(2),
+    atmTransparent(3),
+    ethernetTagged(4),
+    ethernet(5),
+    hdlc(6),
+    ppp(7),
+    cem(8),  -- Historic type
+    atmCellNto1Vcc(9),
+    atmCellNto1Vpc(10),
+    ipLayer2Transport(11),
+    atmCell1to1Vcc(12),
+    atmCell1to1Vpc(13),
+    atmAal5PduVcc(14),
+    frameRelayPortMode(15),
+    cep(16),
+    e1Satop(17),
+    t1Satop(18),
+    e3Satop(19),
+    t3Satop(20),
+    basicCesPsn(21),
+    basicTdmIp(22),
+    tdmCasCesPsn(23),
+    tdmCasTdmIp(24),
+    frDlci(25),
+    wildcard (32767)
+     }
+
+IANAPwPsnTypeTC ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Identifies the PSN type that the PW will use over the
+       network."
+   SYNTAX   INTEGER {
+      mpls        (1),
+      l2tp        (2),
+      udpOverIp   (3),
+      mplsOverIp  (4),
+      mplsOverGre (5),
+      other       (6)
+      }
+
+IANAPwCapabilities ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This TC describes a collection of capabilities related to
+       a specific PW.
+       Values may be added in the future based on new capabilities
+       introduced in IETF documents.
+      "
+  SYNTAX   BITS {
+    pwStatusIndication (0), -- Applicable only if maintenance
+                            -- protocol is in use.
+    pwVCCV             (1)
+  }
+
+END
diff --git a/snmp_builder/mibs/IANA-RTPROTO-MIB.mib b/snmp_builder/mibs/IANA-RTPROTO-MIB.mib
new file mode 100644
index 0000000..6f04143
--- /dev/null
+++ b/snmp_builder/mibs/IANA-RTPROTO-MIB.mib
@@ -0,0 +1,87 @@
+IANA-RTPROTO-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2           FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION               FROM SNMPv2-TC;
+
+ianaRtProtoMIB  MODULE-IDENTITY
+    LAST-UPDATED "200009260000Z" -- September 26, 2000
+    ORGANIZATION "IANA"
+    CONTACT-INFO
+            " Internet Assigned Numbers Authority
+              Internet Corporation for Assigned Names and Numbers
+              4676 Admiralty Way, Suite 330
+              Marina del Rey, CA 90292-6601
+
+              Phone: +1 310 823 9358
+              EMail: iana&iana.org"
+    DESCRIPTION
+            "This MIB module defines the IANAipRouteProtocol and
+            IANAipMRouteProtocol textual conventions for use in MIBs
+            which need to identify unicast or multicast routing
+            mechanisms.
+
+            Any additions or changes to the contents of this MIB module
+            require either publication of an RFC, or Designated Expert
+            Review as defined in RFC 2434, Guidelines for Writing an
+            IANA Considerations Section in RFCs.  The Designated Expert 
+            will be selected by the IESG Area Director(s) of the Routing
+            Area."
+
+    REVISION     "200009260000Z"  -- September 26, 2000 
+    DESCRIPTION  "Original version, published in coordination
+                 with RFC 2932."
+    ::= { mib-2 84 }
+
+IANAipRouteProtocol ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+            "A mechanism for learning routes.  Inclusion of values for
+            routing protocols is not intended to imply that those
+            protocols need be supported."
+   SYNTAX      INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+
+                        -- the following are all dynamic
+                        -- routing protocols
+
+                egp        (5),  -- Exterior Gateway Protocol
+                ggp        (6),  -- Gateway-Gateway Protocol
+                hello      (7),  -- FuzzBall HelloSpeak
+                rip        (8),  -- Berkeley RIP or RIP-II
+                isIs       (9),  -- Dual IS-IS
+                esIs       (10), -- ISO 9542
+                ciscoIgrp  (11), -- Cisco IGRP
+                bbnSpfIgp  (12), -- BBN SPF IGP
+                ospf       (13), -- Open Shortest Path First
+                bgp        (14), -- Border Gateway Protocol
+                idpr       (15), -- InterDomain Policy Routing
+                ciscoEigrp (16), -- Cisco EIGRP
+                dvmrp      (17)  -- DVMRP
+               }
+
+IANAipMRouteProtocol ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+            "The multicast routing protocol.  Inclusion of values for
+            multicast routing protocols is not intended to imply that
+            those protocols need be supported."
+   SYNTAX      INTEGER {
+                   other(1),          -- none of the following
+                   local(2),          -- e.g., manually configured
+                   netmgmt(3),        -- set via net.mgmt protocol
+                   dvmrp(4),
+                   mospf(5),
+                   pimSparseDense(6), -- PIMv1, both DM and SM
+                   cbt(7),
+                   pimSparseMode(8),  -- PIM-SM
+                   pimDenseMode(9),   -- PIM-DM
+                   igmpOnly(10),
+                   bgmp(11),
+                   msdp(12)
+               }
+
+END
diff --git a/snmp_builder/mibs/IANATn3270eTC-MIB.mib b/snmp_builder/mibs/IANATn3270eTC-MIB.mib
new file mode 100644
index 0000000..6f4abdf
--- /dev/null
+++ b/snmp_builder/mibs/IANATn3270eTC-MIB.mib
@@ -0,0 +1,300 @@
+  IANATn3270eTC-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+      MODULE-IDENTITY, mib-2
+          FROM SNMPv2-SMI
+      TEXTUAL-CONVENTION
+          FROM SNMPv2-TC;
+
+    ianaTn3270eTcMib MODULE-IDENTITY
+        LAST-UPDATED "200005100000Z"  -- May 10, 2000
+        ORGANIZATION "IANA"
+        CONTACT-INFO
+            "Internet Assigned Numbers Authority
+
+             Postal: ICANN
+                     4676 Admiralty Way, Suite 330
+                     Marina del Rey, CA 90292
+
+             Tel:    +1  310 823 9358 x20
+             E-Mail: iana&iana.org"
+        DESCRIPTION
+            "This module defines a set of textual conventions
+            for use by the TN3270E-MIB and the TN3270E-RT-MIB.
+
+            Any additions or changes to the contents of this
+            MIB module must first be discussed on the tn3270e
+            working group list at: tn3270e&list.nih.gov
+            and approved by one of the following TN3270E
+            working group contacts:
+
+                Ed Bailey (co-chair) - elbailey&us.ibm.com
+                Michael Boe (co-chair) - mboe&cisco.com
+                Ken White - kennethw&vnet.ibm.com
+                Robert Moore - remoore&us.ibm.com
+
+            The above list of contacts can be altered with
+            the approval of the two co-chairs.
+
+            The Textual Conventions defined within this MIB have
+            no security issues associated with them unless
+            explicitly stated in their corresponding
+            DESCRIPTION clause."
+
+     -- revision log, in reverse chronological order
+
+        REVISION    "200005100000Z"  -- May 10, 2000
+        DESCRIPTION "Fix to import mib-2 instead of experimental."
+
+        REVISION    "199909011000Z"  -- September 1, 1999
+        DESCRIPTION
+            "Initial version transferred from the TN3270E
+            working group to IANA."
+        ::= { mib-2 61 }
+
+  -- Textual Conventions
+
+  IANATn3270eAddrType ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "The textual convention for defining the type of a
+          client address.  The enumeration value unknown(0) is
+          also used to indicate that no actual address is present."
+      SYNTAX INTEGER {
+                      unknown(0),
+                      ipv4(1),
+                      ipv6(2)
+                     }
+
+  IANATn3270eAddress ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "Denotes a client address.  The type of client address is
+          determined by use of the IANATn3270eAddrType textual
+convention.
+          The length in octets of a IANATn3270eAddress object is:
+
+            IANATn3270eAddrType   Address Length
+            +++++++++++++++++++   ++++++++++++++
+                     unknown(0)   not specified or unknown; the
+                                  actual length of the
+                                  IANATn3270eAddress octet string
+                                  indicates if an address
+                                  is present
+                        ipv4(1)   4 OCTETS
+                        ipv6(2)   16 OCTETS
+
+          This textual convention is similar to the TAddress
+          TC defined by RFC1903 except that it allows a
+          zero-length octet string and is not a full transport
+          layer address."
+      SYNTAX OCTET STRING (SIZE (0..255))
+
+  IANATn3270eClientType ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "The textual convention for defining the set of
+           enumerations used by tn3270eTcpConnClientIdFormat
+           in the TN3270E-MIB:
+
+           ENUMERATION        OCTETs  DESCRIPTION
+
+           none(1)              0     Not specified
+           other(2)           1..512  Implementation specific
+           ipv4(3)              6     4-octet IP Address plus
+                                      2-octet TCP Port
+           ipv6(4)              18    16-octet IPv6 Address
+                                      plus 2-octet TCP Port
+           domainName(5)      1..512  The DNS name of a
+                                      client.
+           truncDomainName(6) 1..512  The (truncated) DNS name
+                                      of a client.
+           string(7)          1..512  Unknown Utf8String
+           certificate(8)     1..512  certificate
+           userId(9)          1..8    Client's userid
+           x509dn(10)         1..512  X.509 Distinguished Name
+
+           Representation of a certificate(8) may be lead to
+           a security exposure and is NOT RECOMMENDED without
+           adequate security."
+      SYNTAX INTEGER {
+                      none(1),
+                      other(2),
+                      ipv4(3),
+                      ipv6(4),
+                      domainName(5),
+                      truncDomainName(6),
+                      string(7),
+                      certificate(8),
+                      userId(9),
+                      x509dn(10)
+                     }
+
+  IANATn3270Functions ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "This textual convention reflects the current set of
+          TN3270 and TN3270E functions that can be negotiated
+          between a server and its client:
+
+          RFC856
+          transmitBinary  The sender of this command REQUESTS
+                          permission to begin transmitting, or
+                          confirms that it will now begin
+                          transmitting characters which are to
+                          be interpreted as 8 bits of binary
+                          data by the receiver of the data.
+          RFC860
+          timingMark      The sender of this command REQUESTS
+                          that the receiver of this command
+                          return a WILL TIMING-MARK in the data
+                          stream at the 'appropriate place'.
+          RFC885
+          endOfRecord     The sender of this command requests
+                          permission to begin transmission of
+                          the Telnet END-OF-RECORD (EOR) code
+                          when transmitting data characters, or
+                          the sender of this command confirms it
+                          will now begin transmission of EORs
+                          with transmitted data characters.
+          RFC1091
+          terminalType    Sender is willing to send terminal
+                          type information in a subsequent
+                          sub-negotiation.
+
+          RFC1041
+          tn3270Regime    Sender is willing to send list of
+                          supported 3270 Regimes in a
+                          subsequent sub-negotiation.
+          RFC2355
+          scsCtlCodes     (Printer sessions only).  Allows the
+                          use of the SNA Character Stream (SCS)
+                          and SCS control codes on the session.
+                          SCS is used with LU type 1 SNA sessions.
+          dataStreamCtl   (Printer sessions only).  Allows the use
+                          of the standard 3270 data stream.  This
+                          corresponds to LU type 3 SNA sessions.
+          responses       Provides support for positive and
+                          negative response handling.  Allows the
+                          server to reflect to the client any and
+                          all definite, exception, and no response
+                          requests sent by the host application.
+          bindImage       Allows the server to send the SNA Bind
+                          image and Unbind notification to the
+                          client.
+          sysreq          Allows the client and server to emulate
+                          some (or all, depending on the server) of
+                          the functions of the SYSREQ key in an SNA
+                          environment."
+      SYNTAX BITS {
+                   transmitBinary(0),-- rfc856
+                   timemark(1),      -- rfc860
+                   endOfRecord(2),   -- rfc885
+                   terminalType(3),  -- rfc1091
+                   tn3270Regime(4),  -- rfc1041
+                   scsCtlCodes(5),   -- rfc2355
+                   dataStreamCtl(6), -- rfc2355
+                   responses(7),     -- rfc2355
+                   bindImage(8),     -- rfc2355
+                   sysreq(9)         -- rfc2355
+                  }
+
+  IANATn3270ResourceType ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "The type of resource defined by a resource pool.  Refer
+          to tn3270eResPoolTable."
+      SYNTAX INTEGER {
+                      other(1),
+                      terminal(2),
+                      printer(3),
+                      terminalOrPrinter(4)
+                     }
+
+  IANATn3270DeviceType ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+          "This textual convention defines the list of device
+          types that can be set, as defined by RFC 2355."
+      SYNTAX INTEGER {
+                   -- terminals
+                      ibm3278d2(1),    -- (24 row x 80 col display)
+                      ibm3278d2E(2),   -- (24 row x 80 col display)
+                      ibm3278d3(3),    -- (32 row x 80 col display)
+                      ibm3278d3E(4),   -- (32 row x 80 col display)
+                      ibm3278d4(5),    -- (43 row x 80 col display)
+                      ibm3278d4E(6),   -- (43 row x 80 col display)
+                      ibm3278d5(7),    -- (27 row x 132 col display)
+                      ibm3278d5E(8),   -- (27 row x 132 col display)
+                      ibmDynamic(9),   -- (no pre-defined display size)
+
+                   -- printers
+                      ibm3287d1(10),
+                      unknown(100)
+                     }
+
+  IANATn3270eLogData ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "An octet string representing log data as pertaining to
+        either a TN3270 or TN3270E Session as reported from a
+        TN3270E Server. Log data is stored in an octet string
+        in time order (from earliest to latest).
+
+        Each log element has the following form:
+
+        +------+----+---------+------------+
+        !length!type!TimeStamp! data       !
+        +------+----+---------+------------+
+
+        where
+
+        length    = one-octet length of the data portion of the
+                    trace element, not including the length,
+                    type, and TimeStamp fields
+        type      = one-octet code point characterizing the data.
+        TimeStamp = A 4-octet field representing the number of
+                    TimeTicks since the TN3270E server was last
+                    activated.  The server's last activation time
+                    is available in the tn3270eSrvrConfLastActTime
+                    object in the TN3270E MIB, which has the
+                    syntax DateAndTime.
+        data      = initial part of a PDU.
+
+        length   type
+
+          0-255  x'00' - unknown
+          0      x'01' - inactivity timer expired
+          0      x'02' - dynamic timer expired
+          0      x'03' - actlu req
+          0      x'04' - bind req
+          0      x'05' - clear req
+          0      x'06' - dactlu req
+          0      x'07' - warm actpu req
+          0      x'08' - sdt req
+          0      x'09' - unbind req
+          0      x'0A' - notify resp
+          0      x'0B' - reply PSID neg rsp
+          0      x'0C' - reply PSID pos rsp
+          0      x'0D' - unbind rsp
+          0      x'0E' - hierarchical reset
+          0      x'0F' - client connect req
+          0      x'10' - client disconnect req
+          0      x'11' - timingmark received
+          0      x'12' - flowControl timer expired
+          0      x'13' - neg rsp to host
+          0      x'14' - neg rsp from host
+          0      x'15' - data contention
+          0      x'16' - no buffer to send SNA data
+          0      x'17' - receive response while inbound
+          0      x'18' - client protocol error
+          0      x'19' - badClientSequenceReceived
+          1-255  x'1A' - utf8String
+          2      x'1B' - hexCode, implementation dependent
+
+          Log element entries have a minimum length of 6 octets.
+          The zero-length string indicates that no log data is
+          available."
+      SYNTAX OCTET STRING (SIZE (0 | 6..2048))
+
+  END
diff --git a/snmp_builder/mibs/IANAifType-MIB.mib b/snmp_builder/mibs/IANAifType-MIB.mib
new file mode 100644
index 0000000..856156a
--- /dev/null
+++ b/snmp_builder/mibs/IANAifType-MIB.mib
@@ -0,0 +1,593 @@
+   IANAifType-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, mib-2      FROM SNMPv2-SMI
+       TEXTUAL-CONVENTION          FROM SNMPv2-TC;
+
+   ianaifType MODULE-IDENTITY
+       LAST-UPDATED "201002110000Z"  -- February 11, 2010
+       ORGANIZATION "IANA"
+       CONTACT-INFO "        Internet Assigned Numbers Authority
+
+                     Postal: ICANN
+                             4676 Admiralty Way, Suite 330
+                             Marina del Rey, CA 90292
+
+                     Tel:    +1 310 823 9358
+                     E-Mail: iana&iana.org"
+       DESCRIPTION  "This MIB module defines the IANAifType Textual
+                     Convention, and thus the enumerated values of
+                     the ifType object defined in MIB-II's ifTable."
+
+       REVISION     "201002110000Z"  -- February 11, 2010
+       DESCRIPTION  "Registration of new IANAifType 254."
+
+       REVISION     "201002080000Z"  -- February 08, 2010
+       DESCRIPTION  "Registration of new IANAifTypes 252 and 253."
+
+       REVISION     "200905060000Z"  -- May 06, 2009
+       DESCRIPTION  "Registration of new IANAifType 251."
+
+       REVISION     "200902060000Z"  -- February 06, 2009
+       DESCRIPTION  "Registration of new IANAtunnelType 15."
+
+       REVISION     "200810090000Z"  -- October 09, 2008
+       DESCRIPTION  "Registration of new IANAifType 250."
+
+       REVISION     "200808120000Z"  -- August 12, 2008
+       DESCRIPTION  "Registration of new IANAifType 249."
+
+       REVISION     "200807220000Z"  -- July 22, 2008
+       DESCRIPTION  "Registration of new IANAifTypes 247 and 248."
+
+       REVISION     "200806240000Z"  -- June 24, 2008
+       DESCRIPTION  "Registration of new IANAifType 246."
+
+       REVISION     "200805290000Z"  -- May 29, 2008
+       DESCRIPTION  "Registration of new IANAifType 245."
+
+       REVISION     "200709130000Z"  -- September 13, 2007
+       DESCRIPTION  "Registration of new IANAifTypes 243 and 244."
+
+       REVISION     "200705290000Z"  -- May 29, 2007
+       DESCRIPTION  "Changed the description for IANAifType 228."
+
+       REVISION     "200703080000Z"  -- March 08, 2007
+       DESCRIPTION  "Registration of new IANAifType 242."
+
+       REVISION     "200701230000Z"  -- January 23, 2007
+       DESCRIPTION  "Registration of new IANAifTypes 239, 240, and 241." 
+
+       REVISION     "200610170000Z"  -- October 17, 2006
+       DESCRIPTION  "Deprecated/Obsoleted IANAifType 230.  Registration of 
+                     IANAifType 238." 
+
+       REVISION     "200609250000Z"  -- September 25, 2006
+       DESCRIPTION  "Changed the description for IANA ifType 
+                     184 and added new IANA ifType 237."  
+
+       REVISION     "200608170000Z"  -- August 17, 2006
+       DESCRIPTION  "Changed the descriptions for IANAifTypes
+                     20 and 21."   
+
+       REVISION     "200608110000Z"  -- August 11, 2006
+       DESCRIPTION  "Changed the descriptions for IANAifTypes
+                     7, 11, 62, 69, and 117."   
+
+       REVISION     "200607250000Z"  -- July 25, 2006
+       DESCRIPTION  "Registration of new IANA ifType 236."
+
+       REVISION     "200606140000Z"  -- June 14, 2006
+       DESCRIPTION  "Registration of new IANA ifType 235."
+
+       REVISION     "200603310000Z"  -- March 31, 2006
+       DESCRIPTION  "Registration of new IANA ifType 234."
+
+       REVISION     "200603300000Z"  -- March 30, 2006
+       DESCRIPTION  "Registration of new IANA ifType 233."
+
+       REVISION     "200512220000Z"  -- December 22, 2005
+       DESCRIPTION  "Registration of new IANA ifTypes 231 and 232."
+
+       REVISION     "200510100000Z"  -- October 10, 2005
+       DESCRIPTION  "Registration of new IANA ifType 230."
+
+       REVISION     "200509090000Z"  -- September 09, 2005
+       DESCRIPTION  "Registration of new IANA ifType 229."
+
+       REVISION     "200505270000Z"  -- May 27, 2005
+       DESCRIPTION  "Registration of new IANA ifType 228."
+
+       REVISION     "200503030000Z"  -- March 3, 2005
+       DESCRIPTION  "Added the IANAtunnelType TC and deprecated
+	                 IANAifType sixToFour (215) per RFC4087."
+
+       REVISION     "200411220000Z"  -- November 22, 2004
+       DESCRIPTION  "Registration of new IANA ifType 227 per RFC4631."
+
+       REVISION     "200406170000Z"  -- June 17, 2004
+       DESCRIPTION  "Registration of new IANA ifType 226."
+
+       REVISION     "200405120000Z"  -- May 12, 2004
+       DESCRIPTION  "Added description for IANAifType 6, and 
+	                 changed the descriptions for IANAifTypes
+                     180, 181, and 182."
+
+       REVISION     "200405070000Z"  -- May 7, 2004
+       DESCRIPTION  "Registration of new IANAifType 225."
+
+       REVISION     "200308250000Z"  -- Aug 25, 2003
+       DESCRIPTION  "Deprecated IANAifTypes 7 and 11. Obsoleted
+                     IANAifTypes 62, 69, and 117.  ethernetCsmacd (6)
+                     should be used instead of these values"
+
+       REVISION     "200308180000Z"  -- Aug 18, 2003
+       DESCRIPTION  "Registration of new IANAifType
+                     224."
+
+       REVISION     "200308070000Z"  -- Aug 7, 2003
+       DESCRIPTION  "Registration of new IANAifTypes
+                     222 and 223."
+
+       REVISION     "200303180000Z"  -- Mar 18, 2003
+       DESCRIPTION  "Registration of new IANAifType
+                     221."
+
+       REVISION     "200301130000Z"  -- Jan 13, 2003
+       DESCRIPTION  "Registration of new IANAifType
+                     220."
+
+       REVISION     "200210170000Z"  -- Oct 17, 2002
+       DESCRIPTION  "Registration of new IANAifType
+                     219."
+
+       REVISION     "200207160000Z"  -- Jul 16, 2002
+       DESCRIPTION  "Registration of new IANAifTypes
+                     217 and 218."
+
+       REVISION     "200207100000Z"  -- Jul 10, 2002
+       DESCRIPTION  "Registration of new IANAifTypes
+                     215 and 216."
+
+       REVISION     "200206190000Z"  -- Jun 19, 2002
+       DESCRIPTION  "Registration of new IANAifType
+                     214."
+
+       REVISION     "200201040000Z"  -- Jan 4, 2002
+       DESCRIPTION  "Registration of new IANAifTypes
+                     211, 212 and 213."
+
+       REVISION     "200112200000Z"  -- Dec 20, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     209 and 210."
+
+       REVISION     "200111150000Z"  -- Nov 15, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     207 and 208."
+
+       REVISION     "200111060000Z"  -- Nov 6, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     206."
+
+       REVISION     "200111020000Z"  -- Nov 2, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     205."
+
+       REVISION     "200110160000Z"  -- Oct 16, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     199, 200, 201, 202, 203, and 204."
+
+       REVISION     "200109190000Z"  -- Sept 19, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     198."
+
+       REVISION     "200105110000Z"  -- May 11, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     197."
+
+       REVISION     "200101120000Z"  -- Jan 12, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     195 and 196."
+
+       REVISION     "200012190000Z"  -- Dec 19, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     193 and 194."
+
+       REVISION     "200012070000Z"  -- Dec 07, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     191 and 192."
+
+       REVISION     "200012040000Z"  -- Dec 04, 2000
+       DESCRIPTION  "Registration of new IANAifType
+                     190."
+
+       REVISION     "200010170000Z"  -- Oct 17, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     188 and 189."  
+
+       REVISION     "200010020000Z"  -- Oct 02, 2000
+       DESCRIPTION  "Registration of new IANAifType 187." 
+
+       REVISION     "200009010000Z"  -- Sept 01, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     184, 185, and 186."			
+
+       REVISION     "200008240000Z"  -- Aug 24, 2000
+       DESCRIPTION  "Registration of new IANAifType 183." 
+
+       REVISION     "200008230000Z"  -- Aug 23, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     174-182."
+
+       REVISION     "200008220000Z"  -- Aug 22, 2000
+       DESCRIPTION  "Registration of new IANAifTypes 170,
+                     171, 172 and 173."
+
+       REVISION     "200004250000Z"  -- Apr 25, 2000
+       DESCRIPTION  "Registration of new IANAifTypes 168 and 169."       
+
+       REVISION     "200003060000Z"  -- Mar 6, 2000
+       DESCRIPTION  "Fixed a missing semi-colon in the IMPORT.
+                     Also cleaned up the REVISION log a bit.
+                     It is not complete, but from now on it will
+                     be maintained and kept up to date with each
+                     change to this MIB module."
+
+       REVISION     "199910081430Z"  -- Oct 08, 1999
+       DESCRIPTION  "Include new name assignments up to cnr(85).
+                     This is the first version available via the WWW
+                     at: ftp://ftp.isi.edu/mib/ianaiftype.mib"
+
+       REVISION     "199401310000Z"  -- Jan 31, 1994
+       DESCRIPTION  "Initial version of this MIB as published in
+                     RFC 1573."
+       ::= { mib-2 30 }
+
+   IANAifType ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "This data type is used as the syntax of the ifType
+               object in the (updated) definition of MIB-II's
+               ifTable.
+
+               The definition of this textual convention with the
+               addition of newly assigned values is published
+               periodically by the IANA, in either the Assigned
+               Numbers RFC, or some derivative of it specific to
+               Internet Network Management number assignments.  (The
+               latest arrangements can be obtained by contacting the
+               IANA.)
+
+               Requests for new values should be made to IANA via
+               email (iana&iana.org).
+
+               The relationship between the assignment of ifType
+               values and of OIDs to particular media-specific MIBs
+               is solely the purview of IANA and is subject to change
+               without notice.  Quite often, a media-specific MIB's
+               OID-subtree assignment within MIB-II's 'transmission'
+               subtree will be the same as its ifType value.
+               However, in some circumstances this will not be the
+               case, and implementors must not pre-assume any
+               specific relationship between ifType values and
+               transmission subtree OIDs."
+       SYNTAX  INTEGER {
+                   other(1),          -- none of the following
+                   regular1822(2),
+                   hdh1822(3),
+                   ddnX25(4),
+                   rfc877x25(5),
+                   ethernetCsmacd(6), -- for all ethernet-like interfaces,
+                                      -- regardless of speed, as per RFC3635
+                   iso88023Csmacd(7), -- Deprecated via RFC3635
+                                      -- ethernetCsmacd (6) should be used instead
+                   iso88024TokenBus(8),
+                   iso88025TokenRing(9),
+                   iso88026Man(10),
+                   starLan(11), -- Deprecated via RFC3635
+                                -- ethernetCsmacd (6) should be used instead
+                   proteon10Mbit(12),
+                   proteon80Mbit(13),
+                   hyperchannel(14),
+                   fddi(15),
+                   lapb(16),
+                   sdlc(17),
+                   ds1(18),            -- DS1-MIB
+                   e1(19),             -- Obsolete see DS1-MIB
+                   basicISDN(20),              -- no longer used
+                                               -- see also RFC2127
+                   primaryISDN(21),            -- no longer used
+                                               -- see also RFC2127
+                   propPointToPointSerial(22), -- proprietary serial
+                   ppp(23),
+                   softwareLoopback(24),
+                   eon(25),            -- CLNP over IP 
+                   ethernet3Mbit(26),
+                   nsip(27),           -- XNS over IP
+                   slip(28),           -- generic SLIP
+                   ultra(29),          -- ULTRA technologies
+                   ds3(30),            -- DS3-MIB
+                   sip(31),            -- SMDS, coffee
+                   frameRelay(32),     -- DTE only. 
+                   rs232(33),
+                   para(34),           -- parallel-port
+                   arcnet(35),         -- arcnet
+                   arcnetPlus(36),     -- arcnet plus
+                   atm(37),            -- ATM cells
+                   miox25(38),
+                   sonet(39),          -- SONET or SDH 
+                   x25ple(40),
+                   iso88022llc(41),
+                   localTalk(42),
+                   smdsDxi(43),
+                   frameRelayService(44),  -- FRNETSERV-MIB
+                   v35(45),
+                   hssi(46),
+                   hippi(47),
+                   modem(48),          -- Generic modem
+                   aal5(49),           -- AAL5 over ATM
+                   sonetPath(50),
+                   sonetVT(51),
+                   smdsIcip(52),       -- SMDS InterCarrier Interface
+                   propVirtual(53),    -- proprietary virtual/internal
+                   propMultiplexor(54),-- proprietary multiplexing
+                   ieee80212(55),      -- 100BaseVG
+                   fibreChannel(56),   -- Fibre Channel
+                   hippiInterface(57), -- HIPPI interfaces     
+                   frameRelayInterconnect(58), -- Obsolete use either
+                                       -- frameRelay(32) or 
+                                       -- frameRelayService(44).
+                   aflane8023(59),     -- ATM Emulated LAN for 802.3
+                   aflane8025(60),     -- ATM Emulated LAN for 802.5
+                   cctEmul(61),        -- ATM Emulated circuit          
+                   fastEther(62),      -- Obsoleted via RFC3635
+                                       -- ethernetCsmacd (6) should be used instead
+                   isdn(63),           -- ISDN and X.25           
+                   v11(64),            -- CCITT V.11/X.21             
+                   v36(65),            -- CCITT V.36                  
+                   g703at64k(66),      -- CCITT G703 at 64Kbps
+                   g703at2mb(67),      -- Obsolete see DS1-MIB
+                   qllc(68),           -- SNA QLLC                    
+                   fastEtherFX(69),    -- Obsoleted via RFC3635
+                                       -- ethernetCsmacd (6) should be used instead
+                   channel(70),        -- channel                     
+                   ieee80211(71),      -- radio spread spectrum       
+                   ibm370parChan(72),  -- IBM System 360/370 OEMI Channel
+                   escon(73),          -- IBM Enterprise Systems Connection
+                   dlsw(74),           -- Data Link Switching
+                   isdns(75),          -- ISDN S/T interface
+                   isdnu(76),          -- ISDN U interface
+                   lapd(77),           -- Link Access Protocol D
+                   ipSwitch(78),       -- IP Switching Objects
+                   rsrb(79),           -- Remote Source Route Bridging
+                   atmLogical(80),     -- ATM Logical Port
+                   ds0(81),            -- Digital Signal Level 0
+                   ds0Bundle(82),      -- group of ds0s on the same ds1
+                   bsc(83),            -- Bisynchronous Protocol
+                   async(84),          -- Asynchronous Protocol
+                   cnr(85),            -- Combat Net Radio
+                   iso88025Dtr(86),    -- ISO 802.5r DTR
+                   eplrs(87),          -- Ext Pos Loc Report Sys
+                   arap(88),           -- Appletalk Remote Access Protocol
+                   propCnls(89),       -- Proprietary Connectionless Protocol
+                   hostPad(90),        -- CCITT-ITU X.29 PAD Protocol
+                   termPad(91),        -- CCITT-ITU X.3 PAD Facility
+                   frameRelayMPI(92),  -- Multiproto Interconnect over FR
+                   x213(93),           -- CCITT-ITU X213
+                   adsl(94),           -- Asymmetric Digital Subscriber Loop
+                   radsl(95),          -- Rate-Adapt. Digital Subscriber Loop
+                   sdsl(96),           -- Symmetric Digital Subscriber Loop
+                   vdsl(97),           -- Very H-Speed Digital Subscrib. Loop
+                   iso88025CRFPInt(98), -- ISO 802.5 CRFP
+                   myrinet(99),        -- Myricom Myrinet
+                   voiceEM(100),       -- voice recEive and transMit
+                   voiceFXO(101),      -- voice Foreign Exchange Office
+                   voiceFXS(102),      -- voice Foreign Exchange Station
+                   voiceEncap(103),    -- voice encapsulation
+                   voiceOverIp(104),   -- voice over IP encapsulation
+                   atmDxi(105),        -- ATM DXI
+                   atmFuni(106),       -- ATM FUNI
+                   atmIma (107),       -- ATM IMA		   
+                   pppMultilinkBundle(108), -- PPP Multilink Bundle
+                   ipOverCdlc (109),   -- IBM ipOverCdlc
+                   ipOverClaw (110),   -- IBM Common Link Access to Workstn
+                   stackToStack (111), -- IBM stackToStack
+                   virtualIpAddress (112), -- IBM VIPA
+                   mpc (113),          -- IBM multi-protocol channel support
+                   ipOverAtm (114),    -- IBM ipOverAtm
+                   iso88025Fiber (115), -- ISO 802.5j Fiber Token Ring
+                   tdlc (116),	       -- IBM twinaxial data link control
+                   gigabitEthernet (117), -- Obsoleted via RFC3635
+                                          -- ethernetCsmacd (6) should be used instead
+                   hdlc (118),         -- HDLC
+                   lapf (119),	       -- LAP F
+                   v37 (120),	       -- V.37
+                   x25mlp (121),       -- Multi-Link Protocol
+                   x25huntGroup (122), -- X25 Hunt Group
+                   transpHdlc (123),   -- Transp HDLC
+                   interleave (124),   -- Interleave channel
+                   fast (125),         -- Fast channel
+                   ip (126),	       -- IP (for APPN HPR in IP networks)
+                   docsCableMaclayer (127),  -- CATV Mac Layer
+                   docsCableDownstream (128), -- CATV Downstream interface
+                   docsCableUpstream (129),  -- CATV Upstream interface
+                   a12MppSwitch (130), -- Avalon Parallel Processor
+                   tunnel (131),       -- Encapsulation interface
+                   coffee (132),       -- coffee pot
+                   ces (133),          -- Circuit Emulation Service
+                   atmSubInterface (134), -- ATM Sub Interface
+                   l2vlan (135),       -- Layer 2 Virtual LAN using 802.1Q
+                   l3ipvlan (136),     -- Layer 3 Virtual LAN using IP
+                   l3ipxvlan (137),    -- Layer 3 Virtual LAN using IPX
+                   digitalPowerline (138), -- IP over Power Lines	
+                   mediaMailOverIp (139), -- Multimedia Mail over IP
+                   dtm (140),        -- Dynamic syncronous Transfer Mode
+                   dcn (141),    -- Data Communications Network
+                   ipForward (142),    -- IP Forwarding Interface
+                   msdsl (143),       -- Multi-rate Symmetric DSL
+                   ieee1394 (144), -- IEEE1394 High Performance Serial Bus
+                   if-gsn (145),       --   HIPPI-6400 
+                   dvbRccMacLayer (146), -- DVB-RCC MAC Layer
+                   dvbRccDownstream (147),  -- DVB-RCC Downstream Channel
+                   dvbRccUpstream (148),  -- DVB-RCC Upstream Channel
+                   atmVirtual (149),   -- ATM Virtual Interface
+                   mplsTunnel (150),   -- MPLS Tunnel Virtual Interface
+                   srp (151),	-- Spatial Reuse Protocol	
+                   voiceOverAtm (152),  -- Voice Over ATM
+                   voiceOverFrameRelay (153),   -- Voice Over Frame Relay 
+                   idsl (154),		-- Digital Subscriber Loop over ISDN
+                   compositeLink (155),  -- Avici Composite Link Interface
+                   ss7SigLink (156),     -- SS7 Signaling Link 
+                   propWirelessP2P (157),  --  Prop. P2P wireless interface
+                   frForward (158),    -- Frame Forward Interface
+                   rfc1483 (159),	-- Multiprotocol over ATM AAL5
+                   usb (160),		-- USB Interface
+                   ieee8023adLag (161),  -- IEEE 802.3ad Link Aggregate
+                   bgppolicyaccounting (162), -- BGP Policy Accounting
+                   frf16MfrBundle (163), -- FRF .16 Multilink Frame Relay 
+                   h323Gatekeeper (164), -- H323 Gatekeeper
+                   h323Proxy (165), -- H323 Voice and Video Proxy
+                   mpls (166), -- MPLS                   
+                   mfSigLink (167), -- Multi-frequency signaling link
+                   hdsl2 (168), -- High Bit-Rate DSL - 2nd generation
+                   shdsl (169), -- Multirate HDSL2
+                   ds1FDL (170), -- Facility Data Link 4Kbps on a DS1
+                   pos (171), -- Packet over SONET/SDH Interface
+                   dvbAsiIn (172), -- DVB-ASI Input
+                   dvbAsiOut (173), -- DVB-ASI Output 
+                   plc (174), -- Power Line Communtications
+                   nfas (175), -- Non Facility Associated Signaling
+                   tr008 (176), -- TR008
+                   gr303RDT (177), -- Remote Digital Terminal
+                   gr303IDT (178), -- Integrated Digital Terminal
+                   isup (179), -- ISUP
+                   propDocsWirelessMaclayer (180), -- Cisco proprietary Maclayer
+                   propDocsWirelessDownstream (181), -- Cisco proprietary Downstream
+                   propDocsWirelessUpstream (182), -- Cisco proprietary Upstream
+                   hiperlan2 (183), -- HIPERLAN Type 2 Radio Interface
+                   propBWAp2Mp (184), -- PropBroadbandWirelessAccesspt2multipt
+                             -- use of this iftype for IEEE 802.16 WMAN
+                             -- interfaces as per IEEE Std 802.16f is
+                             -- deprecated and ifType 237 should be used instead.
+                   sonetOverheadChannel (185), -- SONET Overhead Channel
+                   digitalWrapperOverheadChannel (186), -- Digital Wrapper
+                   aal2 (187), -- ATM adaptation layer 2
+                   radioMAC (188), -- MAC layer over radio links
+                   atmRadio (189), -- ATM over radio links   
+                   imt (190), -- Inter Machine Trunks
+                   mvl (191), -- Multiple Virtual Lines DSL
+                   reachDSL (192), -- Long Reach DSL
+                   frDlciEndPt (193), -- Frame Relay DLCI End Point
+                   atmVciEndPt (194), -- ATM VCI End Point
+                   opticalChannel (195), -- Optical Channel
+                   opticalTransport (196), -- Optical Transport
+                   propAtm (197), --  Proprietary ATM       
+                   voiceOverCable (198), -- Voice Over Cable Interface
+                   infiniband (199), -- Infiniband
+                   teLink (200), -- TE Link
+                   q2931 (201), -- Q.2931
+                   virtualTg (202), -- Virtual Trunk Group
+                   sipTg (203), -- SIP Trunk Group
+                   sipSig (204), -- SIP Signaling   
+                   docsCableUpstreamChannel (205), -- CATV Upstream Channel
+                   econet (206), -- Acorn Econet
+                   pon155 (207), -- FSAN 155Mb Symetrical PON interface
+                   pon622 (208), -- FSAN622Mb Symetrical PON interface
+                   bridge (209), -- Transparent bridge interface
+                   linegroup (210), -- Interface common to multiple lines   
+                   voiceEMFGD (211), -- voice E&M Feature Group D
+                   voiceFGDEANA (212), -- voice FGD Exchange Access North American
+                   voiceDID (213), -- voice Direct Inward Dialing
+                   mpegTransport (214), -- MPEG transport interface
+                   sixToFour (215), -- 6to4 interface (DEPRECATED)
+                   gtp (216), -- GTP (GPRS Tunneling Protocol)
+                   pdnEtherLoop1 (217), -- Paradyne EtherLoop 1
+                   pdnEtherLoop2 (218), -- Paradyne EtherLoop 2
+                   opticalChannelGroup (219), -- Optical Channel Group
+                   homepna (220), -- HomePNA ITU-T G.989
+                   gfp (221), -- Generic Framing Procedure (GFP)
+                   ciscoISLvlan (222), -- Layer 2 Virtual LAN using Cisco ISL
+                   actelisMetaLOOP (223), -- Acteleis proprietary MetaLOOP High Speed Link 
+                   fcipLink (224), -- FCIP Link 
+                   rpr (225), -- Resilient Packet Ring Interface Type
+                   qam (226), -- RF Qam Interface
+                   lmp (227), -- Link Management Protocol
+                   cblVectaStar (228), -- Cambridge Broadband Networks Limited VectaStar
+                   docsCableMCmtsDownstream (229), -- CATV Modular CMTS Downstream Interface
+                   adsl2 (230), -- Asymmetric Digital Subscriber Loop Version 2 
+                                -- (DEPRECATED/OBSOLETED - please use adsl2plus 238 instead)
+                   macSecControlledIF (231), -- MACSecControlled 
+                   macSecUncontrolledIF (232), -- MACSecUncontrolled
+                   aviciOpticalEther (233), -- Avici Optical Ethernet Aggregate
+                   atmbond (234), -- atmbond
+                   voiceFGDOS (235), -- voice FGD Operator Services
+                   mocaVersion1 (236), -- MultiMedia over Coax Alliance (MoCA) Interface
+                             -- as documented in information provided privately to IANA
+                   ieee80216WMAN (237), -- IEEE 802.16 WMAN interface
+                   adsl2plus (238), -- Asymmetric Digital Subscriber Loop Version 2, 
+                                   -- Version 2 Plus and all variants
+                   dvbRcsMacLayer (239), -- DVB-RCS MAC Layer
+                   dvbTdm (240), -- DVB Satellite TDM
+                   dvbRcsTdma (241), -- DVB-RCS TDMA
+                   x86Laps (242), -- LAPS based on ITU-T X.86/Y.1323
+                   wwanPP (243), -- 3GPP WWAN
+                   wwanPP2 (244), -- 3GPP2 WWAN
+                   voiceEBS (245), -- voice P-phone EBS physical interface
+                   ifPwType (246), -- Pseudowire interface type
+                   ilan (247), -- Internal LAN on a bridge per IEEE 802.1ap
+                   pip (248), -- Provider Instance Port on a bridge per IEEE 802.1ah PBB
+                   aluELP (249), -- Alcatel-Lucent Ethernet Link Protection
+                   gpon (250), -- Gigabit-capable passive optical networks (G-PON) as per ITU-T G.948
+                   vdsl2 (251), -- Very high speed digital subscriber line Version 2 (as per ITU-T Recommendation G.993.2)
+                   capwapDot11Profile (252), -- WLAN Profile Interface
+                   capwapDot11Bss (253), -- WLAN BSS Interface
+                   capwapWtpVirtualRadio (254) -- WTP Virtual Radio Interface
+                   }
+
+IANAtunnelType ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "The encapsulation method used by a tunnel. The value
+            direct indicates that a packet is encapsulated
+            directly within a normal IP header, with no
+            intermediate header, and unicast to the remote tunnel
+            endpoint (e.g., an RFC 2003 IP-in-IP tunnel, or an RFC
+            1933 IPv6-in-IPv4 tunnel). The value minimal indicates
+            that a Minimal Forwarding Header (RFC 2004) is
+            inserted between the outer header and the payload
+            packet. The value UDP indicates that the payload
+            packet is encapsulated within a normal UDP packet
+            (e.g., RFC 1234).
+
+            The values sixToFour, sixOverFour, and isatap
+            indicates that an IPv6 packet is encapsulated directly
+            within an IPv4 header, with no intermediate header,
+            and unicast to the destination determined by the 6to4,
+            6over4, or ISATAP protocol.
+
+            The remaining protocol-specific values indicate that a
+            header of the protocol of that name is inserted
+            between the outer header and the payload header.
+
+            The assignment policy for IANAtunnelType values is
+            identical to the policy for assigning IANAifType
+            values."
+    SYNTAX     INTEGER {
+                   other(1),        -- none of the following
+                   direct(2),       -- no intermediate header
+                   gre(3),          -- GRE encapsulation
+                   minimal(4),      -- Minimal encapsulation
+                   l2tp(5),         -- L2TP encapsulation
+                   pptp(6),         -- PPTP encapsulation
+                   l2f(7),          -- L2F encapsulation
+                   udp(8),          -- UDP encapsulation
+                   atmp(9),         -- ATMP encapsulation
+                   msdp(10),        -- MSDP encapsulation
+                   sixToFour(11),   -- 6to4 encapsulation
+                   sixOverFour(12), -- 6over4 encapsulation
+                   isatap(13),      -- ISATAP encapsulation
+                   teredo(14),      -- Teredo encapsulation
+                   ipHttps(15)      -- IPHTTPS
+               }
+
+   END
diff --git a/snmp_builder/mibs/IBM-6611-APPN-MIB.mib b/snmp_builder/mibs/IBM-6611-APPN-MIB.mib
new file mode 100644
index 0000000..f2c0a53
--- /dev/null
+++ b/snmp_builder/mibs/IBM-6611-APPN-MIB.mib
@@ -0,0 +1,5112 @@
+IBM-6611-APPN-MIB DEFINITIONS          ::= BEGIN
+
+IMPORTS
+
+        enterprises, Counter, IpAddress,
+        Gauge, TimeTicks
+               FROM RFC1155-SMI
+
+        DisplayString
+               FROM RFC1213-MIB
+
+        OBJECT-TYPE
+               FROM RFC-1212;
+
+-- ******************************************************************
+ibm                            OBJECT IDENTIFIER ::= { enterprises 2 }
+ibmProd                        OBJECT IDENTIFIER ::= { ibm 6 }
+ibm6611                        OBJECT IDENTIFIER ::= { ibmProd 2 }
+ibmappn                        OBJECT IDENTIFIER ::= { ibm6611 13 }
+
+-- ******************** The APPN Node Group *********************
+
+ibmappnNode                    OBJECT IDENTIFIER ::= { ibmappn 1 }
+ibmappnGeneralInfoAndCaps      OBJECT IDENTIFIER ::= { ibmappnNode 1 }
+ibmappnNnUniqueInfoAndCaps     OBJECT IDENTIFIER ::= { ibmappnNode 2 }
+ibmappnEnUniqueCaps            OBJECT IDENTIFIER ::= { ibmappnNode 3 }
+ibmappnPortInformation         OBJECT IDENTIFIER ::= { ibmappnNode 4 }
+ibmappnLinkStationInformation  OBJECT IDENTIFIER ::= { ibmappnNode 5 }
+ibmappnSnmpInformation         OBJECT IDENTIFIER ::= { ibmappnNode 6 }
+ibmappnMemoryUse               OBJECT IDENTIFIER ::= { ibmappnNode 7 }
+ibmappnXidInformation          OBJECT IDENTIFIER ::= { ibmappnNode 8 }
+
+-- This group provides global information about the
+-- APPN node, which is either a network node or an end node.
+
+-- The first section applies to all APPN nodes.
+-- The second section applies only to network nodes.
+-- The third section applies only to end nodes.
+-- The fourth section applies to Port information.
+-- The fifth section applies to SNA link station Information.
+-- The sixth section applies to SNMP traffic for this APPN sub-agent
+-- The seventh section applies to APPN memory usage.
+-- The eighth section applies to XID activities.
+
+-- APPN General Information
+-- This section applies to both network and end nodes.
+
+ibmappnNodeCpName   OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned network name
+          for this node in the format NETID.CPNAME."
+      ::=  { ibmappnGeneralInfoAndCaps 1 }
+
+ibmappnNodeNetid    OBJECT-TYPE
+      SYNTAX DisplayString  (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned APPN network identification,
+           which can be from one to eight characters.
+           This ID is used with the control point name
+           to create a fully-qualified control point name."
+      ::=  { ibmappnGeneralInfoAndCaps 2 }
+
+ibmappnNodeBlockNum OBJECT-TYPE
+      SYNTAX DisplayString   (SIZE (3))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+         "The block number is the first three digits of the node_id.
+          These 3 hexadecimal digits identify the product and are not
+          configurable."
+      ::=  { ibmappnGeneralInfoAndCaps 3 }
+
+ibmappnNodeIdNum OBJECT-TYPE
+      SYNTAX DisplayString  (SIZE (5))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+         "The ID number is the last 5 digits of the node_id.
+          These 5 hexadecimal digits are administratively defined and
+          combined with the 3 digit block number form the node_id.
+          This node_id is used to identify the local node and is
+          include in APPN alerts as well as being included in XIDs.
+          A unique value is required for connections to SNA
+
+          sub-area."
+      ::=  { ibmappnGeneralInfoAndCaps 4 }
+
+ibmappnNodeType  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networkNode(1),
+                     endNode(2),
+                     len(4)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Type of APPN node, either network, len, or end node."
+      ::=  { ibmappnGeneralInfoAndCaps 5 }
+
+ibmappnNodeUpTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Time (in hundredths of a second) since this APPN node
+           was initialized."
+      ::=  { ibmappnGeneralInfoAndCaps 6 }
+
+ibmappnNodeNegotLs   OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports negotiable
+            link stations."
+      ::=  { ibmappnGeneralInfoAndCaps 7 }
+
+ibmappnNodeSegReasm OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports segment
+            reassembly.  This is only supported when
+            segment generation is also supported."
+      ::=  { ibmappnGeneralInfoAndCaps 8 }
+
+ibmappnNodeBindReasm OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports Bind segment
+            reassembly.  This will only be supported when Bind
+            segment generation is also supported."
+      ::=  { ibmappnGeneralInfoAndCaps 9 }
+
+ibmappnNodeParallelTg   OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports parallel TGs."
+      ::=  { ibmappnGeneralInfoAndCaps 10 }
+
+ibmappnNodeService    OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node allows call-in from nodes not
+            defined locally."
+      ::=  { ibmappnGeneralInfoAndCaps 11 }
+
+ibmappnNodeAdaptiveBindPacing  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports adaptive bind pacing."
+      ::=  { ibmappnGeneralInfoAndCaps 12 }
+
+-- **************************************************************
+-- APPN Network Node Information
+-- This section provides global information about the
+-- APPN network node.
+
+ibmappnNodeNnRcvRegChar OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports receiving registered
+            characteristics."
+      ::=  { ibmappnNnUniqueInfoAndCaps 1 }
+
+ibmappnNodeNnGateway    OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this is a gateway node."
+      ::=  { ibmappnNnUniqueInfoAndCaps 2 }
+
+ibmappnNodeNnCentralDirectory  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports central directory
+            cache."
+      ::=  { ibmappnNnUniqueInfoAndCaps 3 }
+
+ibmappnNodeNnTreeCache OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports route tree cache."
+      ::=  { ibmappnNnUniqueInfoAndCaps 4 }
+
+ibmappnNodeNnTreeUpdate  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports
+            incremental_tree_update, which is only
+            supported when tree caching is supported."
+      ::=  { ibmappnNnUniqueInfoAndCaps 5 }
+
+ibmappnNodeNnRouteAddResist   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Route addition resistance is a value that
+          indicates the relative desirability
+          of using this node for intermediate session traffic.
+          The value, which can be any integer 0-255,
+          is used in route computation.  The lower the value,
+          the more desirable the node is for intermediate routing."
+      ::=  { ibmappnNnUniqueInfoAndCaps 6 }
+
+ibmappnNodeNnIsr   OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports intermediate
+            session routing."
+      ::=  { ibmappnNnUniqueInfoAndCaps 7 }
+
+ibmappnNodeNnFrsn             OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated
+           with Topology Database Updates (TDUs) and are unique
+           only within each APPN network node.  A TDU can be
+           associated with multiple APPN resources. This object
+           is the last FRSN sent in a topology update to
+           adjacent network nodes."
+      ::=  { ibmappnNnUniqueInfoAndCaps 8 }
+
+-- **************************************************************
+-- APPN End Node Information
+
+ibmappnNodeEnSegGen     OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether this end node supports segment generation."
+      ::=  { ibmappnEnUniqueCaps 1 }
+
+ibmappnNodeEnModeCosMap    OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this end node supports
+            mode name to COS name mapping."
+      ::=  { ibmappnEnUniqueCaps 2 }
+
+ibmappnNodeEnLocateCdinit  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this end node supports Locate Cdinit."
+      ::=  { ibmappnEnUniqueCaps 3 }
+
+ibmappnNodeEnSendRegNames OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node will register its LUs with the
+            adjacent serving network node:
+
+              NO  - do not register names
+              YES - register names"
+      ::=  { ibmappnEnUniqueCaps 4 }
+
+ibmappnNodeEnSendRegChar OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node supports
+            send register characteristics, which is only
+            supported when send registered names is also
+            supported."
+      ::=  { ibmappnEnUniqueCaps 5 }
+
+-- **************************************************************
+-- APPN Port information
+--
+
+ibmappnNodePortTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodePortEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The Port table describes the configuration and current
+            status of the ports used by APPN.  The type of DLC is
+            included in this table as a pointer to the DLC port
+            specific tables."
+      ::= { ibmappnPortInformation 1 }
+
+ibmappnNodePortEntry OBJECT-TYPE
+      SYNTAX IbmappnNodePortEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The Port Name is used as the index to this table."
+      INDEX
+             { ibmappnNodePortName }
+      ::= { ibmappnNodePortTable 1 }
+
+IbmappnNodePortEntry ::= SEQUENCE {
+      ibmappnNodePortName            DisplayString,
+      ibmappnNodePortState           INTEGER,
+      ibmappnNodePortDlcType         INTEGER,
+      ibmappnNodePortPortType        INTEGER,
+      ibmappnNodePortSIMRIM          INTEGER,
+      ibmappnNodePortLsRole          INTEGER,
+      ibmappnNodePortMaxRcvBtuSize   INTEGER,
+      ibmappnNodePortMaxIframeWindow INTEGER,
+      ibmappnNodePortDefLsGoodXids   Counter,
+      ibmappnNodePortDefLsBadXids    Counter,
+      ibmappnNodePortDynLsGoodXids   Counter,
+      ibmappnNodePortDynLsBadXids    Counter,
+      ibmappnNodePortSpecific        OBJECT IDENTIFIER
+                                   }
+
+ibmappnNodePortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this APPN port.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodePortEntry 1 }
+
+ibmappnNodePortState        OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                         }
+      ACCESS read-write
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates the current state of this port."
+      ::=  { ibmappnNodePortEntry 2 }
+
+ibmappnNodePortDlcType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),          -- none of the following
+                      sdlc(2),
+                      dls(3),
+                      socket(4),
+                      ethernet(5),
+                      tokenRing(6)
+                     }
+          ACCESS  read-only
+          STATUS  mandatory
+          DESCRIPTION
+                  "The type of DLC interface, distinguished according
+                  to the protocol immediately 'below' this layer."
+      ::=  { ibmappnNodePortEntry 3 }
+
+ibmappnNodePortPortType  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     leased(1),
+                     switched(2),
+                     sharedAccessFacilities(3)
+              }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Identifies the type of line used by this port."
+      ::=  { ibmappnNodePortEntry 4 }
+
+ibmappnNodePortSIMRIM  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether Set Initialization Mode (SIM) and
+            Receive Initialization Mode (RIM) are supported."
+      ::=  { ibmappnNodePortEntry 5 }
+
+ibmappnNodePortLsRole OBJECT-TYPE
+      SYNTAX INTEGER {
+                     primary(1),
+                     secondary(2),
+                     negotiable(3),
+                     abm(4)
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Initial role for LSs activated through this port,
+           where 'abm' indicates asynchronous balance mode."
+      ::=  { ibmappnNodePortEntry 6 }
+
+ibmappnNodePortMaxRcvBtuSize OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Maximum Basic Transmission Size (BTU) that a
+           link station on this port can receive."
+      ::=  { ibmappnNodePortEntry 7 }
+
+ibmappnNodePortMaxIframeWindow OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Maximum number of I-frames that can be received
+           by the XID sender before an acknowledgement is received."
+      ::=  { ibmappnNodePortEntry 8 }
+
+ibmappnNodePortDefLsGoodXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of successfull XIDs that have occurred
+             on all defined link stations on this port since the last
+             time this port was started."
+      ::=  { ibmappnNodePortEntry 9 }
+
+ibmappnNodePortDefLsBadXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of unsuccessfull XIDs that have occurred
+             on all defined link stations on this port since the last
+             time this port was started."
+      ::=  { ibmappnNodePortEntry 10 }
+
+ibmappnNodePortDynLsGoodXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of successfull XIDs that have occurred
+             on all dynamic link stations on this port since the last
+             time this port was started."
+      ::=  { ibmappnNodePortEntry 11 }
+
+ibmappnNodePortDynLsBadXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of unsuccessfull XIDs that have occurred
+             on all dynamic link stations on this port since the last
+             time this port was started."
+      ::=  { ibmappnNodePortEntry 12 }
+
+ibmappnNodePortSpecific OBJECT-TYPE
+      SYNTAX OBJECT IDENTIFIER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Identifies the port specific OBJECT IDENTIFIER
+            that can provide additional information."
+      ::=  { ibmappnNodePortEntry 13 }
+
+-- **************************************************************
+--
+--
+
+ibmappnNodePortIpTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodePortIpEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Port table (TCP/IP specific)."
+      ::= { ibmappnPortInformation 2 }
+
+ibmappnNodePortIpEntry OBJECT-TYPE
+      SYNTAX IbmappnNodePortIpEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The IP Name is used as the index to this table."
+      INDEX
+             {ibmappnNodePortIpName }
+      ::= { ibmappnNodePortIpTable 1 }
+
+IbmappnNodePortIpEntry ::= SEQUENCE {
+      ibmappnNodePortIpName         DisplayString,
+      ibmappnNodePortIpPortNum      INTEGER
+                                   }
+
+ibmappnNodePortIpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this APPN port.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodePortIpEntry 1 }
+
+ibmappnNodePortIpPortNum OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local TCP/IP port number."
+      ::=  { ibmappnNodePortIpEntry 2 }
+
+-- **************************************************************
+--
+--
+
+ibmappnNodePortDlsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodePortDlsEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Port table (DLS specific)."
+      ::= { ibmappnPortInformation 3 }
+
+ibmappnNodePortDlsEntry OBJECT-TYPE
+      SYNTAX IbmappnNodePortDlsEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The DLS Name is used as the index to this table."
+      INDEX
+             {ibmappnNodePortDlsName }
+      ::= { ibmappnNodePortDlsTable 1 }
+
+IbmappnNodePortDlsEntry ::= SEQUENCE {
+      ibmappnNodePortDlsName         DisplayString,
+      ibmappnNodePortDlsMac          OCTET STRING,
+      ibmappnNodePortDlsSap          OCTET STRING
+                                   }
+
+ibmappnNodePortDlsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this APPN DLS port.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodePortDlsEntry 1 }
+
+ibmappnNodePortDlsMac OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (6))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local DLS MAC address."
+      ::=  { ibmappnNodePortDlsEntry 2 }
+
+ibmappnNodePortDlsSap OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local DLS Sap address."
+      ::=  { ibmappnNodePortDlsEntry 3 }
+
+-- **************************************************************
+--
+--
+
+ibmappnNodePortTrTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodePortTrEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Port table (Token Ring specific)."
+      ::= { ibmappnPortInformation 4 }
+
+ibmappnNodePortTrEntry OBJECT-TYPE
+      SYNTAX IbmappnNodePortTrEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The TR Name is used as the index to this table."
+      INDEX
+             {ibmappnNodePortTrName }
+      ::= { ibmappnNodePortTrTable 1 }
+
+IbmappnNodePortTrEntry ::= SEQUENCE {
+      ibmappnNodePortTrName         DisplayString,
+      ibmappnNodePortTrMac          OCTET STRING,
+      ibmappnNodePortTrSap          OCTET STRING
+                                   }
+
+ibmappnNodePortTrName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this APPN port.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodePortTrEntry 1 }
+
+ibmappnNodePortTrMac OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (6))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local Token Ring MAC address."
+      ::=  { ibmappnNodePortTrEntry 2 }
+
+ibmappnNodePortTrSap OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local Token Ring Sap address."
+      ::=  { ibmappnNodePortTrEntry 3 }
+
+-- **************************************************************
+-- APPN generic DLC Trace
+--
+
+ibmappnNodePortDlcTraceTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodePortDlcTraceEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Port table generic DLC trace table."
+      ::= { ibmappnPortInformation 5 }
+
+ibmappnNodePortDlcTraceEntry OBJECT-TYPE
+      SYNTAX IbmappnNodePortDlcTraceEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The Port name and a dynamic integer are the index to
+           this table."
+      INDEX
+             {ibmappnNodePortDlcTracPortName,
+              ibmappnNodePortDlcTracIndex}
+      ::= { ibmappnNodePortDlcTraceTable 1 }
+
+IbmappnNodePortDlcTraceEntry ::= SEQUENCE {
+       ibmappnNodePortDlcTracPortName     DisplayString,
+       ibmappnNodePortDlcTracIndex        INTEGER,
+       ibmappnNodePortDlcTracDlcType      INTEGER,
+       ibmappnNodePortDlcTracLocalAddr    DisplayString,
+       ibmappnNodePortDlcTracRemoteAddr   DisplayString,
+       ibmappnNodePortDlcTracMsgType      INTEGER,
+       ibmappnNodePortDlcTracCmdType      INTEGER,
+       ibmappnNodePortDlcTracUseWan       INTEGER
+                                   }
+
+ibmappnNodePortDlcTracPortName OBJECT-TYPE
+      SYNTAX  DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+            "The Port name associated with this this trace table entry."
+      ::=  { ibmappnNodePortDlcTraceEntry 1 }
+
+ibmappnNodePortDlcTracIndex OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+            "This index value is updated every time a new trace entry
+             is created which provides a means to retrieve only the
+             updated entries and also provides a simple method of
+             correlating the entries.  The table will wrap when the
+             table is full, which will result in previous entries
+             being written over.  The mangement station can over
+             come this by retrieving the table using this index to
+
+             retrieve only the new table entries."
+      ::=  { ibmappnNodePortDlcTraceEntry 2 }
+
+ibmappnNodePortDlcTracDlcType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),          -- none of the following
+                      sdlc(2),
+                      dls(3),
+                      socket(4),
+                      ethernet(5),
+                      tokenRing(6)
+                     }
+          ACCESS  read-only
+          STATUS  mandatory
+          DESCRIPTION
+                  "The type of DLC interface, distinguished according
+                  to the protocol immediately 'below' this layer."
+      ::=  { ibmappnNodePortDlcTraceEntry 3 }
+
+ibmappnNodePortDlcTracLocalAddr OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local address in format described below:
+
+           other    = free form DisplayString
+           ip       = ld. ld. ld. ld / 2d
+           tr       = lx: lx: lx: lx: lx: lx . lx
+           dlsw     = lx: lx: lx: lx: lx: lx . lx
+           ethernet = lx: lx: lx: lx: lx: lx . lx
+           "
+      ::=  { ibmappnNodePortDlcTraceEntry 4 }
+
+ibmappnNodePortDlcTracRemoteAddr OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote Address in the format described below:
+           other    = free form DisplayString
+           ip       = ld. ld. ld. ld / 2d
+           tr       = lx: lx: lx: lx: lx: lx . lx
+           dlsw     = lx: lx: lx: lx: lx: lx . lx
+
+           ethernet = lx: lx: lx: lx: lx: lx . lx
+           "
+      ::=  { ibmappnNodePortDlcTraceEntry 5 }
+
+ibmappnNodePortDlcTracMsgType OBJECT-TYPE
+      SYNTAX INTEGER    {
+--              enumeration values between 1 and 1999 are reserved
+--              for potential undefined message types.
+                         other(1),
+                         unknown(2),
+                         request(3),
+                         confirm(4),
+                         indication(5),
+                         response(6)
+
+--              enumeration values between 2000 and 3999 are reserved
+--              for IP socket traces,
+--              enumeration values between 4000 and 5999 are reserved
+--              for DLS traces,
+--              enumeration values between 6000 and 7999 are reserved
+--              for TR  traces,
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+            "Indicates the type of trace record entry"
+      ::=  { ibmappnNodePortDlcTraceEntry 6 }
+
+ibmappnNodePortDlcTracCmdType OBJECT-TYPE
+      SYNTAX INTEGER    {
+--              enumeration values between 1 and 1999 are reserved
+--              for potential undefined message types.
+
+                         testFrame(1),
+                         respFrame(2),
+                         curFrame(3),
+                         icrFrame(4),
+                         respAck(5),
+                         dgrmFrame(6),
+                         xidFrame(7),
+                         contFrame(8),
+                         contedFrame(9),
+                         iFrame(10),
+                         enterBusy(12),
+                         exitBusy(13),
+                         haltFrame(14),
+                         lsHalted(15),
+                         restartLs(16),
+                         lsRestarted(17),
+                         netBioSnq(18),
+                         netBioSnr(19),
+                         gnetFrame(20),
+                         netdFrame(21),
+                         oobFrame(22),
+                         alterSap(23),
+                         testRsp(24),
+                         haltLsNow(25),
+                         testReq(26),
+--              enumeration values between 2000 and 3999 are reserved
+--              for IP socket traces.
+                         ipTestFrame(2001),
+                         ipRespFrame(2002),
+                         ipCurFrame(2003),
+                         ipIcrFrame(2004),
+                         ipRespAck(2005),
+                         ipDgrmFrame(2006),
+                         ipXidFrame(2007),
+                         ipContFrame(2008),
+                         ipContedFrame(2009),
+                         ipIFrame(2010),
+                         ipEnterBusy(2012),
+                         ipExitBusy(2013),
+                         ipHaltFrame(2014),
+                         ipLsHalted(2015),
+                         ipRestartLs(2016),
+                         ipLsRestarted(2017),
+                         ipNetBioSnq(2018),
+                         ipNetBioSnr(2019),
+                         ipGnetFrame(2020),
+                         ipNetdFrame(2021),
+                         ipOobFrame(2022),
+                         ipAlterSap(2023),
+                         ipTestRsp(2024),
+                         ipHaltLsNow(2025),
+                         ipTestReq(2026),
+--              enumeration values between 4000 and 5999 are reserved
+--              for DLS traces.
+
+                         dlsIpm(4124),
+--              enumeration values between 6000 and 7999 are reserved for
+--              TR traces.
+                         trTestFrame(6001),
+                         trRespFrame(6002),
+                         trCurFrame(6003),
+                         trIcrFrame(6004),
+                         trRespAck(6005),
+                         trDgrmFrame(6006),
+                         trXidFrame(6007),
+                         trContFrame(6008),
+                         trContedFrame(6009),
+                         trIFrame(6010),
+                         trEnterBusy(6012),
+                         trExitBusy(6013),
+                         trHaltFrame(6014),
+                         trLsHalted(6015),
+                         trRestartLs(6016),
+                         trLsRestarted(6017),
+                         trNetBioSnq(6018),
+                         trNetBioSnr(6019),
+                         trGnetFrame(6020),
+                         trNetdFrame(6021),
+                         trOobFrame(6022),
+                         trAlterSap(6023),
+                         trTestRsp(6024),
+                         trHaltLsNow(6025),
+                         trTestReq(6026)
+
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+            "Indicates the command type of the trace entry."
+      ::=  { ibmappnNodePortDlcTraceEntry 7 }
+
+ibmappnNodePortDlcTracUseWan OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         other(1),
+                         notApplicable(2),
+                         useUnknown(3),
+                         useWan(4),
+                         useLan(5)
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+            "Indicates the type of connection of the trace entry.
+            For example, token ring and ethernet ports will have
+            useLan as connection.  For the dls port, it could be
+            either useWan if connection is across Wan via dls
+            sessions, or useLan if connection is to a local attached
+            LAN."
+      ::=  { ibmappnNodePortDlcTraceEntry 8 }
+
+-- **************************************************************
+-- APPN Link Station Information
+--
+
+ibmappnNodeLsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodeLsEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table contains detail information about the
+            link station configuration and current status."
+      ::= { ibmappnLinkStationInformation 1 }
+
+ibmappnNodeLsEntry OBJECT-TYPE
+      SYNTAX IbmappnNodeLsEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by the link station name."
+      INDEX
+             { ibmappnNodeLsName }
+      ::= { ibmappnNodeLsTable 1 }
+
+IbmappnNodeLsEntry ::= SEQUENCE {
+      ibmappnNodeLsName             DisplayString,
+      ibmappnNodeLsPortName         DisplayString,
+      ibmappnNodeLsDlcType          INTEGER,
+      ibmappnNodeLsDynamic          INTEGER,
+      ibmappnNodeLsState            INTEGER,
+-- ls defined data   / xid info
+      ibmappnNodeLsCpName           DisplayString,
+      ibmappnNodeLsTgNum            INTEGER,
+      ibmappnNodeLsLimResource      INTEGER,
+      ibmappnNodeLsMigration        INTEGER,
+      ibmappnNodeLsBlockNum         DisplayString,
+      ibmappnNodeLsIdNum            DisplayString,
+      ibmappnNodeLsCpCpSession      INTEGER,
+-- ls parms   (common) / xid info
+      ibmappnNodeLsTargetPacingCount INTEGER,
+      ibmappnNodeLsMaxSendBtuSize    INTEGER,
+-- tg characteristics
+      ibmappnNodeLsEffCap           INTEGER,
+      ibmappnNodeLsConnCost         INTEGER,
+      ibmappnNodeLsByteCost         INTEGER,
+      ibmappnNodeLsSecurity         INTEGER,
+      ibmappnNodeLsDelay            INTEGER,
+      ibmappnNodeLsUsr1             INTEGER,
+      ibmappnNodeLsUsr2             INTEGER,
+      ibmappnNodeLsUsr3             INTEGER,
+-- ls      (performance data)
+      ibmappnNodeLsInXidBytes       Counter,
+      ibmappnNodeLsInMsgBytes       Counter,
+      ibmappnNodeLsInXidFrames      Counter,
+      ibmappnNodeLsInMsgFrames      Counter,
+      ibmappnNodeLsOutXidBytes      Counter,
+      ibmappnNodeLsOutMsgBytes      Counter,
+      ibmappnNodeLsOutXidFrames     Counter,
+      ibmappnNodeLsOutMsgFrames     Counter,
+-- ls       (propgation delay)
+      ibmappnNodeLsEchoRsps         Counter,
+      ibmappnNodeLsCurrentDelay     INTEGER,
+      ibmappnNodeLsMaxDelay         INTEGER,
+      ibmappnNodeLsMinDelay         INTEGER,
+      ibmappnNodeLsMaxDelayTime     TimeTicks,
+-- ls      (Xid Statistics)
+      ibmappnNodeLsGoodXids         Counter,
+      ibmappnNodeLsBadXids          Counter,
+-- Dlc specific
+      ibmappnNodeLsSpecific         OBJECT IDENTIFIER,
+      ibmappnNodeLsSubState         INTEGER,
+      ibmappnNodeLsStartTime        TimeTicks,
+      ibmappnNodeLsActiveTime       TimeTicks,
+      ibmappnNodeLsCurrentStateTime TimeTicks
+                                   }
+
+ibmappnNodeLsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for the link station.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodeLsEntry 1 }
+
+ibmappnNodeLsPortName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for the port.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodeLsEntry 2 }
+
+ibmappnNodeLsDlcType OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),          -- none of the following
+                      sdlc(2),
+                      dls(3),
+                      socket(4),
+                      ethernet(5),
+                      tokenRing(6)
+                     }
+          ACCESS  read-only
+          STATUS  mandatory
+          DESCRIPTION
+                  "The type of DLC interface, distinguished according
+                  to the protocol immediately 'below' this layer."
+      ::=  { ibmappnNodeLsEntry 3 }
+
+ibmappnNodeLsDynamic  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Identifies whether this resource is a dynamic link station.
+          Dynamic link stations are created when adjacent nodes
+          that have not been locally defined establish a connection
+          with this node."
+      ::=  { ibmappnNodeLsEntry 4 }
+
+ibmappnNodeLsState        OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                         }
+      ACCESS read-write
+      STATUS mandatory
+      DESCRIPTION
+           "State of this link station."
+      ::=  { ibmappnNodeLsEntry 5 }
+
+ibmappnNodeLsCpName       OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Fully-qualified name of the adjacent node for this link
+           station.  The name can be from three to seventeen
+           characters.  Format is netid.cpname."
+      ::=  { ibmappnNodeLsEntry 6 }
+
+ibmappnNodeLsTgNum        OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Number associated with the TG to this link station."
+      ::=  { ibmappnNodeLsEntry 7 }
+
+ibmappnNodeLsLimResource  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the link station is
+           a limited resource.  If it is, the TG
+           is deactivated when there are no sessions."
+      ::=  { ibmappnNodeLsEntry 8 }
+
+ibmappnNodeLsMigration  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this link station will be used
+            for connections to down-level or migration partners."
+      ::=  { ibmappnNodeLsEntry 9 }
+
+ibmappnNodeLsBlockNum OBJECT-TYPE
+      SYNTAX DisplayString   (SIZE (3))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+         "The block number is the first three digits of the node_id.
+          These 3 hexideimal digits identify the product and are not
+          configurable."
+      ::=  { ibmappnNodeLsEntry 10 }
+
+ibmappnNodeLsIdNum OBJECT-TYPE
+      SYNTAX DisplayString  (SIZE (5))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+         "The ID number is the last 5 digits of the node_id.
+          These 5 hexadecimal digits are administratively defined and
+          combined with the 3 digit block number form the node_id.
+          This node_id is used to identify the local node and is
+          include in APPN alerts as well as being included in XIDs.
+          A unique value is required for connections to SNA
+          sub-area."
+      ::=  { ibmappnNodeLsEntry 11 }
+
+ibmappnNodeLsCpCpSession  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether CP-CP sessions are
+          supported by this link station."
+      ::=  { ibmappnNodeLsEntry 12 }
+
+ibmappnNodeLsTargetPacingCount  OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Numeric value between 0 and 32767 inclusive indicating
+            the desired pacing window size for BINDs on this TG.
+            The number is significant only when fixed bind pacing
+            is being performed."
+      ::=  { ibmappnNodeLsEntry 13 }
+
+ibmappnNodeLsMaxSendBtuSize  OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Numeric value between 0 and 32767 inclusive indicating
+            the desired number of bytes in a Basic Transmission Unit
+            (BTU) that can be sent on this TG.
+            This is an administratively assigned value."
+      ::=  { ibmappnNodeLsEntry 14 }
+
+ibmappnNodeLsEffCap   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The effective capacity is an integer value that indicates
+           the kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 15 }
+
+ibmappnNodeLsConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255, which indicates maximum cost.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 16 }
+
+ibmappnNodeLsByteCost  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+           Range is from 0 (lowest cost) to 255.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 17 }
+
+ibmappnNodeLsSecurity  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The security is represented as an integer with a range of
+           1 thru 255 with the most common values enumerated as
+           defined above.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 18 }
+
+ibmappnNodeLsDelay  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Relative amount of time that it takes for a signal to
+
+            travel the length of the logical link.  This time is
+            represented in micro seconds, with some of the more
+            common values enumerated.
+            This is an administratively assigned value associated
+            with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 19 }
+
+ibmappnNodeLsUsr1  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "First user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 20 }
+
+ibmappnNodeLsUsr2  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Second user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 21 }
+
+ibmappnNodeLsUsr3  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Third user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with the TG using this link station."
+      ::=  { ibmappnNodeLsEntry 22 }
+
+ibmappnNodeLsInXidBytes OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of XID bytes received."
+      ::=  { ibmappnNodeLsEntry 23 }
+
+ibmappnNodeLsInMsgBytes OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of message (I-frame) bytes received."
+      ::=  { ibmappnNodeLsEntry 24 }
+
+ibmappnNodeLsInXidFrames OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of XID frames received."
+      ::=  { ibmappnNodeLsEntry 25 }
+
+ibmappnNodeLsInMsgFrames OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of message (I-frame) frames received."
+      ::=  { ibmappnNodeLsEntry 26 }
+
+ibmappnNodeLsOutXidBytes OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of XID bytes sent."
+      ::=  { ibmappnNodeLsEntry 27 }
+
+ibmappnNodeLsOutMsgBytes OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of message (I-frame) bytes sent."
+      ::=  { ibmappnNodeLsEntry 28 }
+
+ibmappnNodeLsOutXidFrames OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of XID frames sent."
+      ::=  { ibmappnNodeLsEntry 29 }
+
+ibmappnNodeLsOutMsgFrames OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of message (I-frame) frames sent."
+      ::=  { ibmappnNodeLsEntry 30 }
+
+ibmappnNodeLsEchoRsps     OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of responses returned from adjacent link station.
+            A response should be returned for each test frame sent by
+            this node.
+            Test frames are sent to adjacent nodes periodically to
+            verify connectivity and to measure that actual round trip
+            time, that is the time the test frame is sent until the
+            response is received."
+      ::=  { ibmappnNodeLsEntry 31 }
+
+ibmappnNodeLsCurrentDelay  OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The time that it took for the last test signal to be
+            sent and returned from this link station to the
+            adjacent links station.
+            This time is represented in milliseconds."
+      ::=  { ibmappnNodeLsEntry 32 }
+
+ibmappnNodeLsMaxDelay      OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The longest time it took for a test signal
+            to be sent and returned from this link station to the
+            adjacent links station.
+            This time is represented in milliseconds ."
+      ::=  { ibmappnNodeLsEntry 33 }
+
+ibmappnNodeLsMinDelay      OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The shortest time it took for a test signal
+            to be sent and returned from this link station to the
+            adjacent links station.
+            This time is represented in milliseconds."
+      ::=  { ibmappnNodeLsEntry 34 }
+
+ibmappnNodeLsMaxDelayTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The time (since system up in hundredth of seconds)
+            when the longest delay occurred.
+            This time can be used to identify when this high
+            water mark occurred in relation to the last initialization
+            of the APPN node."
+      ::=  { ibmappnNodeLsEntry 35 }
+
+ibmappnNodeLsGoodXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of successful XIDs that have occurred
+             on this link station since the time it was started."
+      ::=  { ibmappnNodeLsEntry 36 }
+
+ibmappnNodeLsBadXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of unsuccessful XIDs that have occurred
+             on this link station since the time it was started."
+      ::=  { ibmappnNodeLsEntry 37 }
+
+ibmappnNodeLsSpecific  OBJECT-TYPE
+      SYNTAX OBJECT IDENTIFIER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Identifies the DLC specific OBJECT IDENTIFIER
+            that can provide additional information."
+      ::=  { ibmappnNodeLsEntry 38 }
+
+ibmappnNodeLsSubState     OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         sentReqOpnstn(2),
+                         pendXidExch(3),
+                         sentActAs(4),
+                         sentSetMode(5),
+                         active(6),
+                         sentDeactAsOrd(7),
+                         sentDiscOrd(8),
+                         sentDestroyTg(9),
+                         sentCreateTg(10),
+                         sentConnReq(11),
+                         pendRcvConnInd(12),
+                         pendSendConnRsp(13),
+                         sentConnRsp(14),
+                         pendDeact(15)
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "State of this link station."
+      ::=  { ibmappnNodeLsEntry 39 }
+
+ibmappnNodeLsStartTime     OBJECT-TYPE
+      SYNTAX TimeTicks
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The time (in hundredth of seconds) this link station
+            has been active the last time since the time APPN was
+            initialized."
+      ::=  { ibmappnNodeLsEntry 40 }
+
+ibmappnNodeLsActiveTime    OBJECT-TYPE
+      SYNTAX TimeTicks
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The time (in hundredth of seconds) this link station
+            has been in the active state.
+            A zero value indicates the link station has never been
+            active."
+      ::=  { ibmappnNodeLsEntry 41 }
+
+ibmappnNodeLsCurrentStateTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The time (in hundredth of seconds) the link station is
+            in the current state."
+      ::=  { ibmappnNodeLsEntry 42 }
+
+-- **************************************************************
+-- Link station table (TCP/IP specific)
+--
+
+ibmappnNodeLsIpTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodeLsIpEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+          "Link station table (TCP/IP specific)."
+      ::= { ibmappnLinkStationInformation 2 }
+
+ibmappnNodeLsIpEntry OBJECT-TYPE
+      SYNTAX IbmappnNodeLsIpEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The IP Name is used as the index to this table."
+      INDEX
+             {ibmappnNodeLsIpName }
+      ::= { ibmappnNodeLsIpTable 1 }
+
+IbmappnNodeLsIpEntry ::= SEQUENCE {
+      ibmappnNodeLsIpName             DisplayString,
+      ibmappnNodeLsIpState            INTEGER,
+      ibmappnNodeLsLocalIpAddr        IpAddress,
+      ibmappnNodeLsLocalIpPortNum     INTEGER,
+      ibmappnNodeLsRemoteIpAddr       IpAddress,
+      ibmappnNodeLsRemoteIpPortNum    INTEGER
+                                   }
+
+ibmappnNodeLsIpName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this link station. The
+           name can be from one to eight characters."
+      ::=  { ibmappnNodeLsIpEntry 1 }
+
+ibmappnNodeLsIpState        OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "State of this link station."
+      ::=  { ibmappnNodeLsIpEntry 2 }
+
+ibmappnNodeLsLocalIpAddr OBJECT-TYPE
+      SYNTAX IpAddress
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local IP address."
+      ::=  { ibmappnNodeLsIpEntry 3 }
+
+ibmappnNodeLsLocalIpPortNum OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local TCP/IP port number.
+            The default listening port will be administratively
+            assigned and will dynamically change if this node
+            initiates a session with adjacent node."
+      ::=  { ibmappnNodeLsIpEntry 4 }
+
+ibmappnNodeLsRemoteIpAddr OBJECT-TYPE
+      SYNTAX IpAddress
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote IP address."
+      ::=  { ibmappnNodeLsIpEntry 5 }
+
+ibmappnNodeLsRemoteIpPortNum OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote TCP/IP port number."
+      ::=  { ibmappnNodeLsIpEntry 6 }
+
+-- **************************************************************
+-- Ls Table (DLS specific)
+--
+
+ibmappnNodeLsDlsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodeLsDlsEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Ls Table (DLS specific)."
+      ::= { ibmappnLinkStationInformation 3 }
+
+ibmappnNodeLsDlsEntry OBJECT-TYPE
+      SYNTAX IbmappnNodeLsDlsEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The DLS Name is used as the index to this table."
+      INDEX
+             {ibmappnNodeLsDlsName }
+      ::= { ibmappnNodeLsDlsTable 1 }
+
+IbmappnNodeLsDlsEntry ::= SEQUENCE {
+      ibmappnNodeLsDlsName            DisplayString,
+      ibmappnNodeLsDlsState           INTEGER,
+      ibmappnNodeLsLocalDlsMac        OCTET STRING,
+      ibmappnNodeLsLocalDlsSap        OCTET STRING,
+      ibmappnNodeLsRemoteDlsMac       OCTET STRING,
+      ibmappnNodeLsRemoteDlsSap       OCTET STRING
+                                   }
+
+ibmappnNodeLsDlsName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this link station.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodeLsDlsEntry 1 }
+
+ibmappnNodeLsDlsState        OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "State of this link station."
+      ::=  { ibmappnNodeLsDlsEntry 2 }
+
+ibmappnNodeLsLocalDlsMac OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (6))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local MAC address."
+      ::=  { ibmappnNodeLsDlsEntry 3 }
+
+ibmappnNodeLsLocalDlsSap OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local SAP address."
+      ::=  { ibmappnNodeLsDlsEntry 4 }
+
+ibmappnNodeLsRemoteDlsMac OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (6))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote MAC address."
+      ::=  { ibmappnNodeLsDlsEntry 5 }
+
+ibmappnNodeLsRemoteDlsSap OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote SAP address."
+      ::=  { ibmappnNodeLsDlsEntry 6 }
+
+-- **************************************************************
+-- Ls Table (Token Ring specific)
+--
+
+ibmappnNodeLsTrTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodeLsTrEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Ls Table (Token Ring specific)."
+      ::= { ibmappnLinkStationInformation 4 }
+
+ibmappnNodeLsTrEntry OBJECT-TYPE
+      SYNTAX IbmappnNodeLsTrEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The TR Name is used as the index to this table."
+      INDEX
+             {ibmappnNodeLsTrName }
+      ::= { ibmappnNodeLsTrTable 1 }
+
+IbmappnNodeLsTrEntry ::= SEQUENCE {
+      ibmappnNodeLsTrName            DisplayString,
+      ibmappnNodeLsTrState           INTEGER,
+      ibmappnNodeLsLocalTrMac        OCTET STRING,
+      ibmappnNodeLsLocalTrSap        OCTET STRING,
+      ibmappnNodeLsRemoteTrMac       OCTET STRING,
+      ibmappnNodeLsRemoteTrSap       OCTET STRING
+                                   }
+
+ibmappnNodeLsTrName OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this link station.
+           The name can be from one to eight characters."
+      ::=  { ibmappnNodeLsTrEntry 1 }
+
+ibmappnNodeLsTrState        OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         inactive(1),
+                         pendactive(2),
+                         active(3),
+                         pendinact(4)
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "State of this link station."
+      ::=  { ibmappnNodeLsTrEntry 2 }
+
+ibmappnNodeLsLocalTrMac OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (6))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local MAC address."
+      ::=  { ibmappnNodeLsTrEntry 3 }
+
+ibmappnNodeLsLocalTrSap OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Local SAP address."
+      ::=  { ibmappnNodeLsTrEntry 4 }
+
+ibmappnNodeLsRemoteTrMac OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (6))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote MAC address."
+      ::=  { ibmappnNodeLsTrEntry 5 }
+
+ibmappnNodeLsRemoteTrSap OBJECT-TYPE
+      SYNTAX OCTET STRING (SIZE (1))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Remote SAP address."
+      ::=  { ibmappnNodeLsTrEntry 6 }
+
+-- **************************************************************
+-- This table provides information about errors this node encountered
+-- with connections to adjacent nodes.  This includes all exceptional
+-- conditions encountered establishing connections and all exceptional
+-- conditions that result in terminating the connection.
+-- **************************************************************
+
+ibmappnNodeLsStatusTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNodeLsStatusEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table contains information related to exceptional
+            and potential exceptional conditions that occur during
+            the activation, XID exchange, and termination of the
+            connection."
+      ::= { ibmappnLinkStationInformation 5 }
+
+ibmappnNodeLsStatusEntry OBJECT-TYPE
+      SYNTAX IbmappnNodeLsStatusEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by the LsStatusIndex, which is an
+            integer that is continuously updated until it eventually
+            wraps.  This provides the management station the ability
+            to retrieve only the updates to the table by using the
+            standard GET NEXT."
+      INDEX
+             { ibmappnNodeLsStatusIndex }
+      ::= { ibmappnNodeLsStatusTable 1 }
+
+IbmappnNodeLsStatusEntry ::= SEQUENCE {
+      ibmappnNodeLsStatusIndex              INTEGER,
+      ibmappnNodeLsStatusTime               TimeTicks,
+      ibmappnNodeLsStatusLsName             DisplayString,
+      ibmappnNodeLsStatusCpName             DisplayString,
+      ibmappnNodeLsStatusNodeId             OCTET STRING,
+      ibmappnNodeLsStatusTgNum              INTEGER,
+      ibmappnNodeLsStatusGeneralSense       OCTET STRING,
+      ibmappnNodeLsStatusNofRetry           INTEGER,
+      ibmappnNodeLsStatusEndSense           OCTET STRING,
+      ibmappnNodeLsStatusXidLocalSense      OCTET STRING,
+      ibmappnNodeLsStatusXidRemoteSense     OCTET STRING,
+      ibmappnNodeLsStatusXidByteInError     INTEGER,
+      ibmappnNodeLsStatusXidBitInError      INTEGER,
+      ibmappnNodeLsStatusDlcType            INTEGER,
+      ibmappnNodeLsStatusLocalAddr          DisplayString,
+      ibmappnNodeLsStatusRemoteAddr         DisplayString
+                                   }
+
+ibmappnNodeLsStatusIndex       OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "This index is continuous index this table."
+      ::=  { ibmappnNodeLsStatusEntry 1 }
+
+ibmappnNodeLsStatusTime    OBJECT-TYPE
+      SYNTAX TimeTicks
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Time (in hundreds of a second) since this node was last
+           initialized."
+      ::=  { ibmappnNodeLsStatusEntry 2 }
+
+ibmappnNodeLsStatusLsName       OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this link station."
+      ::=  { ibmappnNodeLsStatusEntry 3 }
+
+ibmappnNodeLsStatusCpName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned fully-qualified name of the
+           adjacent node partner.  This will be provided when the
+           adjacent node has been defined at this node or when the
+           XID sequence has proceeded far enough to to identify the
+           adjacent node.  A blank CP name will indicate the name is
+           unknown."
+      ::=  { ibmappnNodeLsStatusEntry 4 }
+
+ibmappnNodeLsStatusNodeId       OBJECT-TYPE
+      SYNTAX OCTET STRING
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Adjacent Node id"
+      ::=  { ibmappnNodeLsStatusEntry 5 }
+
+ibmappnNodeLsStatusTgNum   OBJECT-TYPE
+      SYNTAX INTEGER (0..256)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Number associated with the TG to this link station
+           with a range from 0 to 256.  A value of 256 indicates
+
+           the tg number has not been negotiated and is unknown at
+           this time."
+      ::=  { ibmappnNodeLsStatusEntry 6 }
+
+ibmappnNodeLsStatusGeneralSense OBJECT-TYPE
+      SYNTAX OCTET STRING
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The error sense code associated with the start sequence of
+           activation of a link up to the beginning of the XID
+           sequence."
+      ::=  { ibmappnNodeLsStatusEntry 7 }
+
+ibmappnNodeLsStatusNofRetry OBJECT-TYPE
+      SYNTAX INTEGER    {
+                          retry(1),
+                          noretry(2)
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether Node Operator Facility will retry the
+          start request to activate the link."
+      ::=  { ibmappnNodeLsStatusEntry 8 }
+
+ibmappnNodeLsStatusEndSense OBJECT-TYPE
+      SYNTAX OCTET STRING
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The sense code associated with the termination of the link
+           connection to adjacent node.  This includes all sense
+           information included in the disconnect recieved from the
+           lower layer DLCs and also sense information indicating the
+           link termination originated by upper layer APPN components."
+      ::=  { ibmappnNodeLsStatusEntry 9 }
+
+ibmappnNodeLsStatusXidLocalSense   OBJECT-TYPE
+      SYNTAX OCTET STRING
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The error sense code associated with the rejection of the
+
+           XID."
+      ::=  { ibmappnNodeLsStatusEntry 10 }
+
+ibmappnNodeLsStatusXidRemoteSense   OBJECT-TYPE
+      SYNTAX OCTET STRING
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The error sense code adjacent node returned to this node
+           indicating the reason the XID was rejected."
+      ::=  { ibmappnNodeLsStatusEntry 11 }
+
+ibmappnNodeLsStatusXidByteInError      OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         na(1000)
+                        }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "This identifies the actual byte in the XID that caused the
+           error.  The value of zero (0) indicates that the variable
+           has no meaning."
+      ::=  { ibmappnNodeLsStatusEntry 12 }
+
+ibmappnNodeLsStatusXidBitInError      OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         na(8)   -- not applicable
+                        }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "This identifies the actual bit within the error byte of the
+           XID.  This only has meaning when the byte in error is
+           greater than zero."
+      ::=  { ibmappnNodeLsStatusEntry 13 }
+
+ibmappnNodeLsStatusDlcType  OBJECT-TYPE
+      SYNTAX INTEGER    {
+                         other(1),
+                         sdlc(2),
+                         dls(3),
+                         socket(4),
+                         ethernet(5),
+                         tr(6)
+
+                         }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "This identifies DLC type that was being used when error
+           occurred.  This also is used to the format of the
+           local and remote address provided.
+
+           other    = free form DisplayString
+
+           ip       = ld. ld. ld. ld / 2d
+
+           tr       = lx: lx: lx: lx: lx: lx . lx
+
+           dlsw     = lx: lx: lx: lx: lx: lx . lx
+
+           ethernet = lx: lx: lx: lx: lx: lx . lx
+           "
+      ::=  { ibmappnNodeLsStatusEntry 14 }
+
+ibmappnNodeLsStatusLocalAddr   OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "This contains a displayable string that identifies the
+           DLC type and appropriate address.  See DlcType above for
+           details of the format."
+      ::=  { ibmappnNodeLsStatusEntry 15 }
+
+ibmappnNodeLsStatusRemoteAddr  OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "This contains a displayable string that identifies the
+           DLC type and appropriate address.  See DlcType above for
+           details of the format."
+      ::=  { ibmappnNodeLsStatusEntry 16 }
+
+-- **************************************************************
+-- APPN SNMP Performance Information
+
+--
+
+ibmappnSnmpInPkts OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+        "Total number of messages delivered to the APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 1 }
+
+ibmappnSnmpInGetRequests OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Total number of GET requests delivered to the APPN SNMP
+           sub-agent."
+      ::=  { ibmappnSnmpInformation 2 }
+
+ibmappnSnmpInGetNexts OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Total number of GETNEXT requests delivered to the APPN SNMP
+           sub-agent."
+      ::=  { ibmappnSnmpInformation 3 }
+
+ibmappnSnmpInSetRequests OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Total number of SET requests delivered to the APPN SNMP
+           sub-agent."
+      ::=  { ibmappnSnmpInformation 4 }
+
+ibmappnSnmpInTotalVars OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Total number of VARIABLES included in both
+           GET and GETNEXT requests to the APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 5 }
+
+ibmappnSnmpInGetVars OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Total number of VARIBLES included in all
+           GET requests to the APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 6 }
+
+ibmappnSnmpInGetNextVars OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Total number of VARIABLES included in all
+           GETNEXT requests to the APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 7 }
+
+ibmappnSnmpInSetVars OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of VARIBLES included in all
+            SET requests to the APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 8 }
+
+ibmappnSnmpOutNoSuchNames OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of VARIABLES that could not
+            be found by the APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 9 }
+
+ibmappnSnmpOutGenErrs OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of undefined errors that
+
+            occurred processing SNMP request to the
+            APPN SNMP sub-agent."
+      ::=  { ibmappnSnmpInformation 10 }
+
+-- **************************************************************
+
+-- This group provides global information about the
+-- APPN node performance.
+
+-- The first section applies to the APPN control point
+-- storage utilization.
+
+ibmappnMemorySize OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Size of the shared storage segment, as obtained
+            by storage management from the underlying operating
+            system."
+      ::=  { ibmappnMemoryUse 1 }
+
+ibmappnMemoryUsed OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of bytes in the segment that are currently
+            allocated to process."
+      ::=  { ibmappnMemoryUse 2 }
+
+ibmappnMemoryWarnThresh OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Allocation threshold beyond which storage
+            management considers the storage resources
+            to be constrained."
+      ::=  { ibmappnMemoryUse 3 }
+
+ibmappnMemoryCritThresh OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Allocation threshold beyond which storage
+            management considers the storage resources
+            to be critically constrained."
+      ::=  { ibmappnMemoryUse 4 }
+
+-- **************************************************************
+-- The following are Counters maintained by the APPN CS component that
+-- relate to total overall XID activity.
+------------------------------------------------------------------------
+ibmappnNodeDefLsGoodXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The current number of successfull XIDs that have occurred
+             on all defined link stations since the last time this
+             node was initialized."
+    ::= { ibmappnXidInformation 1 }
+
+ibmappnNodeDefLsBadXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The current number of unsuccessfull XIDs that have
+             occurred on all defined link stations since the last
+             time this node was initialized."
+    ::= { ibmappnXidInformation 2 }
+
+ibmappnNodeDynLsGoodXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The current number of successfull XIDs that have
+             occurred on all dynamic link stations since the last
+             time this node was initialized."
+    ::= { ibmappnXidInformation 3 }
+
+ibmappnNodeDynLsBadXids    OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The current number of unsuccessfull XIDs that have
+             occurred on all dynamic link stations since the last
+             time this node was initialized."
+    ::= { ibmappnXidInformation 4 }
+
+-- ************** The APPN Topology Group ***********************
+
+ibmappnNn             OBJECT IDENTIFIER ::= { ibmappn 2  }
+ibmappnNnTopo         OBJECT IDENTIFIER ::= { ibmappnNn 1  }
+ibmappnNnTopology     OBJECT IDENTIFIER ::= { ibmappnNn 3  }
+
+-- This group will be used to represent the entire APPN network
+-- topology, including Network nodes, virtual nodes and
+-- all TGs associated with these nodes.
+--
+
+-- Network nodes
+-- The APPN topology database consists of information about every
+-- APPN network node.  This information is learned over time
+-- as each network node exchanges topology information with
+-- each of its adjacent network nodes.  The database consists
+-- of information about each node and all of the transmissions
+-- groups used by each node.
+
+-- Virtual nodes
+-- Information about virtual nodes (connection networks) is treated
+-- the same as information about network node
+-- and is replicated at each network node.
+-- The node name is the only meaningful information. The other
+-- node objects use default values.  Each node that has defined
+-- a TG with this virtual node as the destination also defines a
+-- TG on this virtual node.  There is a TG record for each node
+-- that uses this virtual node.
+--
+--
+-- The APPN node table represents the APPN topology
+-- database with the APPN CP fully-qualified name
+-- being used as the index to this table.
+-- This entire table could be retrieved using the GET NEXT command,
+-- however, due to the dynamics of APPN, nodes could come and
+-- go and status could change as the table is being
+-- retrieved.  Although in most cases the data retrieved will be valid,
+-- missing and invalid status could cause problems for
+-- a management application that was graphically displaying
+-- this data.
+-- This potential problem can be eliminated by
+-- retrieving the FRSN before and after completion
+-- of retrieval of the APPN topology table.
+-- If the FRSN has changed, then repeat the
+-- retrieval of the entire topology table
+-- until the FRSN remains unchanged.
+-- Object 'appnNnFrsn' represents the last
+-- change or update to this node's topology
+-- database.
+--
+--
+-- The format of the actual database is as follows:
+--
+-- Node table (entry for each node in network)
+--  TG table (entry for each TG owned by node)
+--
+-- Due to SNMP ASN.1 limitations, we cannot represent
+-- the TG table within the node table.  We define
+-- separate tables for nodes and TGs, adding the node
+-- name to each TG entry to provide a means of
+-- correlating each TG with its originating node.
+
+ibmappnNnTopoMaxNodes   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Maximum number of nodes allowed in the APPN topology
+          database.  This administratively assigned value must be
+          equal to or greater than the maximum total number of end
+          nodes and network nodes.
+          If the number of nodes exceeds this value, APPN will issue
+          an Alert and the node can no longer participate as a network
+          node."
+      ::=  { ibmappnNnTopo 1 }
+
+ibmappnNnTopoCurNumNodes OBJECT-TYPE
+      SYNTAX Gauge
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Current number of nodes in this node's topology database.
+           If this value exceeds the maximum number of nodes allowed
+           (NnTopoMaxNodes), APPN alert CPDB002 is
+           issued."
+      ::=  { ibmappnNnTopo 2 }
+
+ibmappnNnTopoInTdus OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of TDUs received from
+           all adjacent NN since last initialization."
+      ::=  { ibmappnNnTopo 3 }
+
+ibmappnNnTopoOutTdus OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of TDUs built by this node to be sent to
+           all adjacent NN since last initialization."
+      ::=  { ibmappnNnTopo 4 }
+
+ibmappnNnTopoNodeLowRsns         OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node updates received by this
+           node with a RSN less than the current RSN.  Both even and
+           odd RSN are included in this count.
+           These TDUs are not errors, but result when TDUs are
+           broadcast to all adjacent network nodes.  No update to
+           this node's topology database occurs, but this node will
+           send a TDU with it's higher RSN to the adjacent node that
+           sent this low RSN."
+      ::=  { ibmappnNnTopo 5 }
+
+ibmappnNnTopoNodeEqualRsns      OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node updates received by this
+           node with a RSN equal to the current RSN.  Both even and
+           odd RSN are included in this count.
+           These TDUs are not errors, but result when TDUs are
+           broadcast to all adjacent network nodes.  No update to
+           this node's topology database occurs."
+      ::=  { ibmappnNnTopo 6 }
+
+ibmappnNnTopoNodeGoodHighRsns      OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node updates received by this
+           node with a RSN greater than the current RSN.
+           This results in updating this nodes topology and
+           broadcasting a TDU to all adjacent network nodes.  It is
+           not required to send a TDU to the sender of this update
+           because that node already has the update."
+      ::=  { ibmappnNnTopo 7 }
+
+ibmappnNnTopoNodeBadHighRsns       OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node updates received by this
+           node with an odd RSN greater than the current RSN.
+           These updates represent a topology inconsistency detected
+           by one of the APPN network nodes.
+           This results in updating this nodes topology and broadcasting
+           a TDU to all adjacent network nodes."
+      ::=  { ibmappnNnTopo 8 }
+
+ibmappnNnTopoNodeStateUpdates  OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology Node records built as a result
+
+            of internally detected node state changes that affect APPN
+            topology and routing.  Updates are sent via TDUs to all
+            adjacent network nodes."
+      ::=  { ibmappnNnTopo 9 }
+
+ibmappnNnTopoNodeErrors     OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node records inconsistencies
+            detected by this node.  This occurs when this node attempts
+            to update its topology database and detects a data
+            inconsistency.  This node will create a TDU with the
+            current RSN incremented to the next odd number and
+            broadcast it to all adjacent NNs."
+      ::=  { ibmappnNnTopo 10 }
+
+ibmappnNnTopoNodeTimerUpdates OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node records built for this
+            node's resource due to timer updates. Updates are sent via
+            TDUs to all adjacent network nodes. These updates insure
+            other network nodes do not delete this node's resources
+            from their topology database."
+      ::=  { ibmappnNnTopo 11 }
+
+ibmappnNnTopoNodePurges     OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology node records purged from this
+            node's topology database.  This occurs when a node has not
+            been updated in a specified amount of time.  The owning
+            node is responsible for broadcasting updates for its
+            resource that it wants kept in the network topology."
+      ::=  { ibmappnNnTopo 12 }
+
+ibmappnNnTopoTgLowRsns         OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG updates received by this
+           node with a RSN less than the current RSN.  Both even and
+           odd RSN are included in this count.
+           These TDUs are not errors, but result when TDUs are
+           broadcast to all adjacent network nodes.  No update to
+           this node's topology database occurs, but this node will
+           send a TDU with it's higher RSN to the sender of the low
+           RSN."
+      ::=  { ibmappnNnTopo 13 }
+
+ibmappnNnTopoTgEqualRsns       OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG updates received by this
+           node with a RSN equal to the current RSN.  Both even and
+           odd RSN are included in this count.
+           These TDUs are not errors, but result when TDUs are
+           broadcast to all adjacent network nodes.  No update to
+           this node's topology database occurs."
+      ::=  { ibmappnNnTopo 14 }
+
+ibmappnNnTopoTgGoodHighRsns       OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG updates received by this
+           node with a RSN greater than the current RSN.
+           This results in updating this nodes topology and
+           broadcasting the update to all adjacent network nodes."
+      ::=  { ibmappnNnTopo 15 }
+
+ibmappnNnTopoTgBadHighRsns      OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG updates received by this
+
+           node with an odd RSN greater than the current RSN.
+           These updates represent a topology inconsistency detected
+           by one of the APPN network nodes.
+           This results in updating this nodes topology and
+           broadcasting a TDU to all adjacent network nodes."
+      ::=  { ibmappnNnTopo 16 }
+
+ibmappnNnTopoTgStateUpdates  OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG records built as a result
+            of internally detected node state changes that affect APPN
+            topology and routing.  Updates are sent via TDUs to all
+            adjacent network nodes."
+      ::=  { ibmappnNnTopo 17 }
+
+ibmappnNnTopoTgErrors     OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG records inconsistencies
+            detected by this node.  This occurs when this node
+            attempts to update its topology database and detects a
+            data inconsistency.  This node will create a TDU with
+            the current RSN incremented to the next odd number and
+            broadcast it to all adjacent NNs."
+      ::=  { ibmappnNnTopo 18 }
+
+ibmappnNnTopoTgTimerUpdates OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG records built for this
+            node's resource due to timer updates. Updates are sent via
+            TDUs to all adjacent network nodes. These updates insure
+            other network nodes do not delete this node's resources
+            from their topology database."
+      ::=  { ibmappnNnTopo 19 }
+
+ibmappnNnTopoTgPurges     OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Total number of topology TG records purged from this
+            node's topology database.  This occurs when a TG has not
+            been updated in a specified amount of time.  The owning
+            node is responsible for broadcasting updates for its
+            resource that it wants to keep in the network topology."
+      ::=  { ibmappnNnTopo 20 }
+
+ibmappnNnTopoTotalRouteCalcs OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of routes calculated  for all class of services
+            since the last initialization."
+      ::=  { ibmappnNnTopo 21 }
+
+ibmappnNnTopoTotalRouteRejs OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of route requests for all class of services that
+            could not be calculated since last initialization."
+      ::=  { ibmappnNnTopo 22 }
+
+ibmappnNnTopoRouteTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNnTopoRouteEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Table containing an entry for every Class of Service
+            that it has calculated a route for."
+      ::= { ibmappnNnTopo 23 }
+
+ibmappnNnTopoRouteEntry OBJECT-TYPE
+      SYNTAX IbmappnNnTopoRouteEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+            "The Class of Service name is the index for this table."
+      INDEX
+             {ibmappnNnTopoRouteCos}
+      ::= { ibmappnNnTopoRouteTable 1 }
+
+IbmappnNnTopoRouteEntry ::= SEQUENCE {
+      ibmappnNnTopoRouteCos                  DisplayString,
+      ibmappnNnTopoRouteTrees                Counter,
+      ibmappnNnTopoRouteCalcs                Counter,
+      ibmappnNnTopoRouteRejs                 Counter
+}
+
+ibmappnNnTopoRouteCos   OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The Class of Service for the route."
+      ::=  { ibmappnNnTopoRouteEntry 1 }
+
+ibmappnNnTopoRouteTrees OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of routes tree caches built for this Class of
+            Service since the last initialization."
+      ::=  { ibmappnNnTopoRouteEntry 2 }
+
+ibmappnNnTopoRouteCalcs OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of routes calculated since last initialization."
+      ::=  { ibmappnNnTopoRouteEntry 3 }
+
+ibmappnNnTopoRouteRejs OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of route requests that could not
+           be calculated since last initialization."
+      ::=  { ibmappnNnTopoRouteEntry 4 }
+
+--Adjacent node table
+--  Node name (only applies to adjacent nodes)
+--  Number of out of sequence TDUs
+--  Status of CP-CP sessions (ConWinner/ConLoser)
+--  Last FRSN sent
+--  Last FRSN received
+
+ibmappnNnAdjNodeTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNnAdjNodeEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Table containing an entry for every node.  The information
+            kept in this table is the last FRSN sent and received,
+            the status of the CP-CP sessions, and a gauge that
+            indicates the number of outstanding TDUs."
+      ::= { ibmappnNn 2 }
+
+ibmappnNnAdjNodeEntry OBJECT-TYPE
+      SYNTAX IbmappnNnAdjNodeEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+            "The adjacent node name is the index for this table."
+      INDEX
+             {ibmappnNnAdjNodeAdjName}
+      ::= { ibmappnNnAdjNodeTable 1 }
+
+IbmappnNnAdjNodeEntry ::= SEQUENCE {
+      ibmappnNnAdjNodeAdjName            DisplayString,
+      ibmappnNnAdjNodeCpCpSessStatus     INTEGER,
+      ibmappnNnAdjNodeOutOfSeqTdus       Gauge,
+      ibmappnNnAdjNodeLastFrsnSent       INTEGER,
+      ibmappnNnAdjNodeLastFrsnRcvd       INTEGER
+                                   }
+
+ibmappnNnAdjNodeAdjName              OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "An administratively-assigned fully-qualified
+            name of this node's adjacent network node."
+      ::=  { ibmappnNnAdjNodeEntry 1 }
+
+ibmappnNnAdjNodeCpCpSessStatus    OBJECT-TYPE
+      SYNTAX INTEGER {
+                     active(1),
+                     conLoserActive(2),
+                     conWinnerActive(3),
+                     inactive(4)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates the state of CP-CP sessions between this node
+           and adjacent network and end nodes.  Incative indicates no
+           CP-CP sessions exists between this node and the adjacent
+           node.  Active indicates CP-CP sessons are active using both
+           the ConWinner and ConLoser sessions. The session initiated
+           by this node is refered to as the ConWinner session and is
+           used by this node to send to the adjacent node.  The
+           ConLoserr session is initiated by the adjacent node and
+           is used by this node to receive from the adjacent node."
+      ::=  { ibmappnNnAdjNodeEntry 2 }
+
+ibmappnNnAdjNodeOutOfSeqTdus  OBJECT-TYPE
+      SYNTAX Gauge
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of out of sequence Topology Database
+           Updates (TDUs).  In a quiesced state, this value is
+           zero.  In normal operation, the value varies
+           depending on the network environment."
+      ::=  { ibmappnNnAdjNodeEntry 3 }
+
+ibmappnNnAdjNodeLastFrsnSent  OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated
+           with Topology Database Updates (TDUs) and are unique
+           only within each APPN network node.  A TDU can be
+           associated with multiple APPN resources. This FRSN
+           indicates the last TDU sent to this adjacent node."
+      ::=  { ibmappnNnAdjNodeEntry 4 }
+
+ibmappnNnAdjNodeLastFrsnRcvd OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated
+           with Topology Database Updates (TDUs) and are unique
+           only within each APPN network node.  A TDU can be
+           associated with multiple APPN resources. This FRSN
+           indicates the last TDU received from this adjacent node."
+      ::=  { ibmappnNnAdjNodeEntry 5 }
+
+--APPN Node Topology table
+
+-- This table describes every known APPN Network node
+-- and Virtual node.
+
+ibmappnNnTopologyTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNnTopologyEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Portion of the APPN routing table
+            that describes all of the APPN network nodes
+            and virtual nodes known to this node."
+      ::= { ibmappnNnTopology 1 }
+
+ibmappnNnTopologyEntry OBJECT-TYPE
+      SYNTAX IbmappnNnTopologyEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The fully-qualified node name is used to
+            index this table."
+      INDEX
+             {ibmappnNnNodeName}
+      ::= { ibmappnNnTopologyTable 1 }
+
+IbmappnNnTopologyEntry  ::= SEQUENCE {
+
+      ibmappnNnNodeName                     DisplayString,
+      ibmappnNnNodeFrsn                     INTEGER,
+      ibmappnNnNodeEntryTimeLeft            INTEGER,
+      ibmappnNnNodeType                     INTEGER,
+      ibmappnNnNodeRsn                      INTEGER,
+      ibmappnNnNodeRouteAddResist           INTEGER,
+      ibmappnNnNodeCongested                INTEGER,
+      ibmappnNnNodeIsrDepleted              INTEGER,
+      ibmappnNnNodeEndptDepleted            INTEGER,
+      ibmappnNnNodeQuiescing                INTEGER,
+      ibmappnNnNodeGateway                  INTEGER,
+      ibmappnNnNodeCentralDirectory         INTEGER,
+      ibmappnNnNodeIsr                      INTEGER,
+      ibmappnNnNodeChainSupport             INTEGER
+}
+
+ibmappnNnNodeName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned network name that is locally
+          defined at each network node in the format NETID.CPNAME."
+      ::=  { ibmappnNnTopologyEntry 1 }
+
+ibmappnNnNodeFrsn             OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated
+           with Topology Database Updates (TDUs) and are unique
+           only within each APPN network node.  A TDU can be
+           associated with multiple APPN resources. This FRSN
+           indicates the last time this resource was updated at
+
+           this node."
+      ::=  { ibmappnNnTopologyEntry 2 }
+
+ibmappnNnNodeEntryTimeLeft    OBJECT-TYPE
+      SYNTAX INTEGER (0..31)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of days before deletion of this
+            network node entry. Range is 0-31."
+      ::=  { ibmappnNnTopologyEntry 3 }
+
+ibmappnNnNodeType    OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networknode(1),
+                     virtualnode(3)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Type of APPN node."
+      ::=  { ibmappnNnTopologyEntry 4 }
+
+ibmappnNnNodeRsn       OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Resource sequence number that is assigned and
+            controlled by the network node that owns this
+            resource. This is always an even 32-bit number
+            unless an error has occurred."
+      ::=  { ibmappnNnTopologyEntry 5 }
+
+ibmappnNnNodeRouteAddResist   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Route addition resistance
+          indicates the relative desirability
+          of using this node for intermediate session traffic.
+          The value, which can be any integer 0-255,
+          is used in route computation.  The lower the value,
+          the more desirable the node is for intermediate routing."
+      ::=  { ibmappnNnTopologyEntry 6 }
+
+ibmappnNnNodeCongested        OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether this node is congested.
+           This node is not be included in route selection
+           by other nodes when this congestion exists."
+       ::= { ibmappnNnTopologyEntry 7 }
+
+ibmappnNnNodeIsrDepleted OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether intermediate session
+           routing resources are depleted.  This node is
+           not included in intermediate route selection
+           by other nodes when resources are depleted."
+      ::=  { ibmappnNnTopologyEntry 8 }
+
+ibmappnNnNodeEndptDepleted OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether session endpoint resources are depleted."
+      ::=  { ibmappnNnTopologyEntry 9 }
+
+ibmappnNnNodeQuiescing     OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether the node is quiescing.
+           This node is not included in route selection
+           by other nodes when the node is quiescing."
+      ::=  { ibmappnNnTopologyEntry 10 }
+
+ibmappnNnNodeGateway       OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node provide gateway functions."
+      ::=  { ibmappnNnTopologyEntry 11 }
+
+ibmappnNnNodeCentralDirectory OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node is central directory."
+      ::=  { ibmappnNnTopologyEntry 12 }
+
+ibmappnNnNodeIsr   OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports intermediate session
+            routing (ISR)."
+      ::=  { ibmappnNnTopologyEntry 13 }
+
+ibmappnNnNodeChainSupport OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports chaining."
+      ::=  { ibmappnNnTopologyEntry 14 }
+
+--APPN transmission group (TG) table
+
+-- This table describes the TGs associated with
+-- the APPN network nodes.
+-- The originating node is repeated here to provide a
+-- means of correlating the TGs with the nodes.
+
+ibmappnNnTgTopologyTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNnTgTopologyEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Portion of the APPN topology database
+           that describes all of the APPN transmissions groups
+           used by the APPN network nodes."
+      ::= { ibmappnNnTopology 2 }
+
+ibmappnNnTgTopologyEntry OBJECT-TYPE
+      SYNTAX IbmappnNnTgTopologyEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table requires three indexes to provide a
+            unique index.  The indexes are the owning or originating
+            CPname, the destination CPname, and the TG number."
+      INDEX
+             {ibmappnNnTgOwner,
+              ibmappnNnTgDest,
+              ibmappnNnTgNum}
+      ::= { ibmappnNnTgTopologyTable 1 }
+
+IbmappnNnTgTopologyEntry ::= SEQUENCE {
+
+      ibmappnNnTgOwner      DisplayString,
+      ibmappnNnTgDest       DisplayString,
+      ibmappnNnTgNum        INTEGER,
+      ibmappnNnTgFrsn       INTEGER,
+      ibmappnNnTgEntryTimeLeft INTEGER,
+      ibmappnNnTgDestVirtual INTEGER,
+      ibmappnNnTgDlcData    OCTET STRING,
+      ibmappnNnTgRsn        INTEGER,
+      ibmappnNnTgOperational INTEGER,
+      ibmappnNnTgQuiescing   INTEGER,
+      ibmappnNnTgCpCpSession INTEGER,
+      ibmappnNnTgEffCap     INTEGER,
+      ibmappnNnTgConnCost   INTEGER,
+      ibmappnNnTgByteCost   INTEGER,
+      ibmappnNnTgSecurity   INTEGER,
+      ibmappnNnTgDelay      INTEGER,
+      ibmappnNnTgModemClass INTEGER,
+      ibmappnNnTgUsr1       INTEGER,
+      ibmappnNnTgUsr2       INTEGER,
+      ibmappnNnTgUsr3       INTEGER}
+
+ibmappnNnTgOwner  OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for the
+          originating node for this TG. The format
+          is NETID.CPNAME and is the same name
+          specified in the node table."
+      ::=  { ibmappnNnTgTopologyEntry 1 }
+
+ibmappnNnTgDest  OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned fully-qualified
+          network name for the destination node for this TG."
+      ::=  { ibmappnNnTgTopologyEntry 2 }
+
+ibmappnNnTgNum  OBJECT-TYPE
+      SYNTAX INTEGER  (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Number associated with this
+          transmission group. Range is 0-255."
+      ::=  { ibmappnNnTgTopologyEntry 3 }
+
+ibmappnNnTgFrsn             OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Flow reduction sequence numbers (FRSNs) are associated
+            with Topology Database Updates (TDUs) and are unique
+            only within each APPN network node.  A TDU can be
+            associated with multiple APPN resources.  This FRSN
+            indicates the last time this resource was updated at
+            this node."
+      ::=  { ibmappnNnTgTopologyEntry 4 }
+
+ibmappnNnTgEntryTimeLeft    OBJECT-TYPE
+      SYNTAX INTEGER (0..31)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of days before deletion of this
+            network node TG entry. Range is 0-31."
+      ::=  { ibmappnNnTgTopologyEntry 5 }
+
+ibmappnNnTgDestVirtual  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the destination node is
+           a virtual node."
+      ::=  { ibmappnNnTgTopologyEntry 6 }
+
+ibmappnNnTgDlcData  OBJECT-TYPE
+      SYNTAX OCTET STRING  (SIZE (0..9))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "DLC specific data related to the link connection
+           network.
+           Token-Ring    - MAC/SAP
+           X.25 Switched - dial digits
+           X.21 Switched - dial digits
+           Circuit Swtch - dial digits"
+      ::=  { ibmappnNnTgTopologyEntry 7 }
+
+ibmappnNnTgRsn      OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Current owning node's resource sequence number
+            for this resource."
+      ::=  { ibmappnNnTgTopologyEntry 8 }
+
+ibmappnNnTgOperational OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the transmission group
+
+           is operational."
+      ::=  { ibmappnNnTgTopologyEntry 9 }
+
+ibmappnNnTgQuiescing OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the transmission group
+           is quiescing."
+      ::=  { ibmappnNnTgTopologyEntry 10 }
+
+ibmappnNnTgCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether CP-CP sessions are supported on this TG."
+      ::=  { ibmappnNnTgTopologyEntry 11 }
+
+ibmappnNnTgEffCap   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The effective capacity is an integer value that indicates
+           the kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 12 }
+
+ibmappnNnTgConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255, which indicates maximum cost.
+           This is an administratively assigned value associated
+
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 13 }
+
+ibmappnNnTgByteCost  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+           Range is from 0 (lowest cost) to 255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 14 }
+
+ibmappnNnTgSecurity  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The security is represented as an integer with a range of
+           1 thru 255 with the most common values enumerated as
+           defined above.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 15 }
+
+ibmappnNnTgDelay  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Relative amount of time that it takes for a signal to
+            travel the length of the logical link.  This time is
+            represented in micro seconds, with some of the more
+            common values enumerated.
+            This is an administratively assigned value associated
+            with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 16 }
+
+ibmappnNnTgModemClass        OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "This is used to have multiple images for a
+            connection network.  For a connection network
+           it is the same as in the TG vector; for
+           a non-connection network it is X'00'."
+      ::=  { ibmappnNnTgTopologyEntry 17 }
+
+ibmappnNnTgUsr1  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "First user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 18 }
+
+ibmappnNnTgUsr2  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Second user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 19 }
+
+ibmappnNnTgUsr3  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Third user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyEntry 20 }
+
+--APPN Node Topology table (using FRSN as index)
+
+-- This table describes every known APPN Network node
+-- and Virtual node.
+
+ibmappnNnTopologyFRTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNnTopologyFREntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Portion of the APPN routing table
+            that describes all of the APPN network nodes
+            and virtual nodes known to this node."
+      ::= { ibmappnNnTopology 3 }
+
+ibmappnNnTopologyFREntry OBJECT-TYPE
+      SYNTAX IbmappnNnTopologyFREntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by two columns:
+            FRSN, followed by fully-qualified node name."
+      INDEX
+             {ibmappnNnNodeFRFrsn,
+              ibmappnNnNodeFRName}
+      ::= { ibmappnNnTopologyFRTable 1 }
+
+IbmappnNnTopologyFREntry ::= SEQUENCE {
+      ibmappnNnNodeFRName                     DisplayString,
+      ibmappnNnNodeFRFrsn                     INTEGER,
+      ibmappnNnNodeFREntryTimeLeft            INTEGER,
+      ibmappnNnNodeFRType                     INTEGER,
+      ibmappnNnNodeFRRsn                      INTEGER,
+      ibmappnNnNodeFRRouteAddResist           INTEGER,
+      ibmappnNnNodeFRCongested                INTEGER,
+      ibmappnNnNodeFRIsrDepleted              INTEGER,
+      ibmappnNnNodeFREndptDepleted            INTEGER,
+      ibmappnNnNodeFRQuiescing                INTEGER,
+      ibmappnNnNodeFRGateway                  INTEGER,
+      ibmappnNnNodeFRCentralDirectory         INTEGER,
+      ibmappnNnNodeFRIsr                      INTEGER,
+      ibmappnNnNodeFRChainSupport             INTEGER
+}
+
+ibmappnNnNodeFRName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned network name that is locally
+          defined at each network node in the format NETID.CPNAME."
+      ::=  { ibmappnNnTopologyFREntry 1 }
+
+ibmappnNnNodeFRFrsn             OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated
+           with Topology Database Updates (TDUs) and are unique
+           only within each APPN network node.  A TDU can be
+           associated with multiple APPN resources. This FRSN
+           indicates the last time this resource was updated at
+           this node."
+      ::=  { ibmappnNnTopologyFREntry 2 }
+
+ibmappnNnNodeFREntryTimeLeft    OBJECT-TYPE
+      SYNTAX INTEGER (0..31)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of days before deletion of this
+            network node entry. Range is 0-31."
+      ::=  { ibmappnNnTopologyFREntry 3 }
+
+ibmappnNnNodeFRType    OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networknode(1),
+                     virtualnode(3)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Type of APPN node."
+      ::=  { ibmappnNnTopologyFREntry 4 }
+
+ibmappnNnNodeFRRsn       OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Resource sequence number that is assigned and
+            controlled by the network node that owns this
+            resource. This is always an even 32-bit number
+            unless an error has occurred."
+      ::=  { ibmappnNnTopologyFREntry 5 }
+
+ibmappnNnNodeFRRouteAddResist   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Route addition resistance
+          indicates the relative desirability
+          of using this node for intermediate session traffic.
+          The value, which can be any integer 0-255,
+          is used in route computation.  The lower the value,
+          the more desirable the node is for intermediate routing."
+      ::=  { ibmappnNnTopologyFREntry 6 }
+
+ibmappnNnNodeFRCongested        OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether this node is congested.
+           This node is not be included in route selection
+           by other nodes when this congestion exists."
+       ::= { ibmappnNnTopologyFREntry 7 }
+
+ibmappnNnNodeFRIsrDepleted OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether intermediate session
+           routing resources are depleted.  This node is
+           not included in intermediate route selection
+           by other nodes when resources are depleted."
+      ::=  { ibmappnNnTopologyFREntry 8 }
+
+ibmappnNnNodeFREndptDepleted OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether session endpoint resources are depleted."
+      ::=  { ibmappnNnTopologyFREntry 9 }
+
+ibmappnNnNodeFRQuiescing     OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether the node is quiescing.
+           This node is not included in route selection
+           by other nodes when the node is quiescing."
+      ::=  { ibmappnNnTopologyFREntry 10 }
+
+ibmappnNnNodeFRGateway       OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node provide gateway functions."
+      ::=  { ibmappnNnTopologyFREntry 11 }
+
+ibmappnNnNodeFRCentralDirectory OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node is central directory."
+      ::=  { ibmappnNnTopologyFREntry 12 }
+
+ibmappnNnNodeFRIsr   OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports intermediate session
+            routing (ISR)."
+      ::=  { ibmappnNnTopologyFREntry 13 }
+
+ibmappnNnNodeFRChainSupport OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports chaining."
+      ::=  { ibmappnNnTopologyFREntry 14 }
+
+--APPN transmission group (TG) table
+
+-- This table describes the TGs associated with
+-- the APPN network nodes.
+-- The originating node is repeated here to provide a
+-- means of correlating the TGs with the nodes.
+
+ibmappnNnTgTopologyFRTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnNnTgTopologyFREntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Portion of the APPN topology database
+           that describes all of the APPN transmissions groups
+           used by the APPN network nodes."
+      ::= { ibmappnNnTopology 4 }
+
+ibmappnNnTgTopologyFREntry OBJECT-TYPE
+      SYNTAX IbmappnNnTgTopologyFREntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by four columns:
+            FRSN, TG owner fully-qualified node name,
+            TG destination fully-qualified node name, and TG number."
+      INDEX
+
+             {ibmappnNnTgFRFrsn,
+              ibmappnNnTgFROwner,
+              ibmappnNnTgFRDest,
+              ibmappnNnTgFRNum}
+      ::= { ibmappnNnTgTopologyFRTable 1 }
+
+IbmappnNnTgTopologyFREntry ::= SEQUENCE {
+
+      ibmappnNnTgFROwner      DisplayString,
+      ibmappnNnTgFRDest       DisplayString,
+      ibmappnNnTgFRNum        INTEGER,
+      ibmappnNnTgFRFrsn       INTEGER,
+      ibmappnNnTgFREntryTimeLeft INTEGER,
+      ibmappnNnTgFRDestVirtual INTEGER,
+      ibmappnNnTgFRDlcData    OCTET STRING,
+      ibmappnNnTgFRRsn        INTEGER,
+      ibmappnNnTgFROperational INTEGER,
+      ibmappnNnTgFRQuiescing   INTEGER,
+      ibmappnNnTgFRCpCpSession INTEGER,
+      ibmappnNnTgFREffCap     INTEGER,
+      ibmappnNnTgFRConnCost   INTEGER,
+      ibmappnNnTgFRByteCost   INTEGER,
+      ibmappnNnTgFRSecurity   INTEGER,
+      ibmappnNnTgFRDelay      INTEGER,
+      ibmappnNnTgFRModemClass INTEGER,
+      ibmappnNnTgFRUsr1       INTEGER,
+      ibmappnNnTgFRUsr2       INTEGER,
+      ibmappnNnTgFRUsr3       INTEGER}
+
+ibmappnNnTgFROwner  OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for the
+          originating node for this TG. The format
+          is NETID.CPNAME and is the same name
+          specified in the node table."
+      ::=  { ibmappnNnTgTopologyFREntry 1 }
+
+ibmappnNnTgFRDest  OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned fully-qualified
+          network name for the destination node for this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 2 }
+
+ibmappnNnTgFRNum  OBJECT-TYPE
+      SYNTAX INTEGER  (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Number associated with this
+          transmission group. Range is 0-255."
+      ::=  { ibmappnNnTgTopologyFREntry 3 }
+
+ibmappnNnTgFRFrsn             OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Flow reduction sequence numbers (FRSNs) are associated
+            with Topology Database Updates (TDUs) and are unique
+            only within each APPN network node.  A TDU can be
+            associated with multiple APPN resources.  This FRSN
+            indicates the last time this resource was updated at
+            this node."
+      ::=  { ibmappnNnTgTopologyFREntry 4 }
+
+ibmappnNnTgFREntryTimeLeft    OBJECT-TYPE
+      SYNTAX INTEGER (0..31)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of days before deletion of this
+            network node TG entry. Range is 0-31."
+      ::=  { ibmappnNnTgTopologyFREntry 5 }
+
+ibmappnNnTgFRDestVirtual  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the destination node is
+           a virtual node."
+      ::=  { ibmappnNnTgTopologyFREntry 6 }
+
+ibmappnNnTgFRDlcData  OBJECT-TYPE
+      SYNTAX OCTET STRING  (SIZE (0..9))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "DLC specific data related to the link connection
+           network.
+           Token-Ring    - MAC/SAP
+           X.25 Switched - dial digits
+           X.21 Switched - dial digits
+           Circuit Swtch - dial digits"
+      ::=  { ibmappnNnTgTopologyFREntry 7 }
+
+ibmappnNnTgFRRsn      OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Current owning node's resource sequence number
+            for this resource."
+      ::=  { ibmappnNnTgTopologyFREntry 8 }
+
+ibmappnNnTgFROperational OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the transmission group
+           is operational."
+      ::=  { ibmappnNnTgTopologyFREntry 9 }
+
+ibmappnNnTgFRQuiescing OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the transmission group
+           is quiescing."
+      ::=  { ibmappnNnTgTopologyFREntry 10 }
+
+ibmappnNnTgFRCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether CP-CP sessions are supported on this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 11 }
+
+ibmappnNnTgFREffCap   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The effective capacity is an integer value that indicates
+           the kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 12 }
+
+ibmappnNnTgFRConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255, which indicates maximum cost.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 13 }
+
+ibmappnNnTgFRByteCost  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+           Range is from 0 (lowest cost) to 255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 14 }
+
+ibmappnNnTgFRSecurity  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The security is represented as an integer with a range of
+           1 thru 255 with the most common values enumerated as
+           defined above.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 15 }
+
+ibmappnNnTgFRDelay  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Relative amount of time that it takes for a signal to
+            travel the length of the logical link.  This time is
+            represented in micro seconds, with some of the more
+            common values enumerated.
+            This is an administratively assigned value associated
+            with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 16 }
+
+ibmappnNnTgFRModemClass        OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "This is used to have multiple images for a
+
+            connection network.  For a connection network
+           it is the same as in the TG vector; for
+           a non-connection network it is X'00'."
+      ::=  { ibmappnNnTgTopologyFREntry 17 }
+
+ibmappnNnTgFRUsr1  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "First user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 18 }
+
+ibmappnNnTgFRUsr2  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Second user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 19 }
+
+ibmappnNnTgFRUsr3  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Third user-defined TG characteristic for this TG with
+           a range of 0-255.
+           This is an administratively assigned value associated
+           with this TG."
+      ::=  { ibmappnNnTgTopologyFREntry 20 }
+
+-- ************** The APPN Local Topology Group *****************
+
+ibmappnLocalTopology   OBJECT IDENTIFIER ::= { ibmappn 3 }
+ibmappnLocalThisNode   OBJECT IDENTIFIER ::= { ibmappnLocalTopology 1 }
+ibmappnLocalGeneral    OBJECT IDENTIFIER ::= { ibmappnLocalThisNode   1}
+
+ibmappnLocalNnSpecific OBJECT IDENTIFIER ::= { ibmappnLocalThisNode   2}
+ibmappnLocalTg         OBJECT IDENTIFIER ::= { ibmappnLocalThisNode   3}
+ibmappnLocalEnTopology OBJECT IDENTIFIER ::= { ibmappnLocalTopology 2 }
+
+-- The LocalEnNodeTable and LocalEnTgTable will replace these OIs
+--ibmappnLocalEnNode   OBJECT IDENTIFIER ::= { ibmappnLocalEnTopology 1}
+--ibmappnLocalEnTg     OBJECT IDENTIFIER ::= { ibmappnLocalEnTopology 2}
+
+--This MIB Group represents the local topology
+--maintained in both APPN end nodes and network nodes.
+--Although the same control vectors are used for both network
+--and local topology, many of the attributes only apply to network
+--nodes.  This MIB group defines the required objects for retrieval
+--of information about this node and the objects that represent
+--the local topology about end nodes.
+--
+--This node could be either an network node or an end node. The
+--definition must address both cases.
+--
+--1  Information about this node
+--   a  General information about this node, both NN and ENs.
+--   b  Information about this node that applies only to NNs.
+--   c  TG table      (repeated for each TG this node owns)
+--
+--2  Information about the end nodes known to this network node
+--   (THIS SECTION ONLY APPLIES TO NETWORK NODES)
+--   a  End node table (entry for each end node )
+--   b  TG table      (repeated for each TG owned by the end nodes)
+--
+--
+
+----
+-- General information section
+
+ibmappnLocalNodeName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned fully-qualified name
+          for this node. Format is NETID.CPNAME."
+      ::=  { ibmappnLocalGeneral 1 }
+
+ibmappnLocalNodeType    OBJECT-TYPE
+      SYNTAX INTEGER {
+                     networknode(1),
+                     endnode(2),
+                     len(4)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Type of APPN node."
+      ::=  { ibmappnLocalGeneral 2 }
+
+-- Network node unique information
+--
+
+ibmappnLocalNnRsn       OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Resource sequence number is assigned and
+            controlled by the network node that owns this
+            resource.  This is always an even unsigned
+            number unless an error has occurred."
+      ::=  { ibmappnLocalNnSpecific  1 }
+
+ibmappnLocalNnRouteAddResist   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Route addition resistance
+          indicates the relative desirability
+          of using this node for intermediate session traffic.
+          The value, which can be any integer 0-255,
+          is used in route computation.  The lower the value,
+          the more desirable the node is for intermediate routing."
+      ::=  { ibmappnLocalNnSpecific 2 }
+
+ibmappnLocalNnCongested        OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether this node is congested.
+
+            Other network nodes stop routing traffic to
+            this node while this flag is on."
+       ::= { ibmappnLocalNnSpecific 3 }
+
+ibmappnLocalNnIsrDepleted OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicate whether intermediated session
+            routing resources are depleted.
+            Other network nodes stop routing traffic through
+            this node while this flag is on."
+      ::=  { ibmappnLocalNnSpecific 4 }
+
+ibmappnLocalNnEndptDepleted OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether session endpoint resources
+            are depleted."
+      ::=  { ibmappnLocalNnSpecific 5 }
+
+ibmappnLocalNnQuiescing     OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node is quiescing."
+      ::=  { ibmappnLocalNnSpecific 6 }
+
+ibmappnLocalNnGateway       OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node is a gateway."
+      ::=  { ibmappnLocalNnSpecific 7 }
+
+ibmappnLocalNnCentralDirectory OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node is a central directory."
+      ::=  { ibmappnLocalNnSpecific 8 }
+
+ibmappnLocalNnIsr   OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports intermediate
+            session routing."
+      ::=  { ibmappnLocalNnSpecific 9 }
+
+ibmappnLocalNnChainSupport OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the node supports chaining."
+      ::=  { ibmappnLocalNnSpecific 10 }
+
+ibmappnLocalNnFrsn     OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Flow reduction sequence numbers (FRSNs) are associated
+           with Topology Database Updates (TDUs) and are unique
+           only within each APPN network node.  A TDU can be
+           associated with multiple APPN resources. This object
+           is the last FRSN sent in a topology update to
+           adjacent network nodes."
+      ::=  { ibmappnLocalNnSpecific 11 }
+
+-- Local TG information
+-- APPN Transmission Group (TG) Table
+
+-- This table describes the TGs associated with
+-- this node only.
+
+ibmappnLocalTgTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnLocalTgEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "TG Table describes all of the TGs owned by this
+            node.  The TG destination can be a virtual
+            node, network node, len, or end node."
+      ::= { ibmappnLocalTg 1 }
+
+ibmappnLocalTgEntry OBJECT-TYPE
+      SYNTAX IbmappnLocalTgEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by the destination CPname
+            and the TG number."
+      INDEX
+             {ibmappnLocalTgDest,
+              ibmappnLocalTgNum}
+      ::= { ibmappnLocalTgTable 1 }
+
+IbmappnLocalTgEntry ::= SEQUENCE {
+
+      ibmappnLocalTgDest       DisplayString,
+      ibmappnLocalTgNum        INTEGER,
+      ibmappnLocalTgDestVirtual INTEGER,
+      ibmappnLocalTgDlcData    OCTET STRING,
+      ibmappnLocalTgRsn        INTEGER,
+      ibmappnLocalTgQuiescing  INTEGER,
+      ibmappnLocalTgOperational INTEGER,
+      ibmappnLocalTgCpCpSession INTEGER,
+      ibmappnLocalTgEffCap     INTEGER,
+      ibmappnLocalTgConnCost   INTEGER,
+      ibmappnLocalTgByteCost   INTEGER,
+      ibmappnLocalTgSecurity   INTEGER,
+      ibmappnLocalTgDelay      INTEGER,
+      ibmappnLocalTgModemClass INTEGER,
+      ibmappnLocalTgUsr1       INTEGER,
+      ibmappnLocalTgUsr2       INTEGER,
+      ibmappnLocalTgUsr3       INTEGER
+                                   }
+
+ibmappnLocalTgDest  OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Administratively-assigned name for the
+           destination node for this TG.
+           This is the fully-qualified network node
+           name."
+      ::=  { ibmappnLocalTgEntry 1 }
+
+ibmappnLocalTgNum  OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number associated with this transmission group."
+      ::=  { ibmappnLocalTgEntry 2 }
+
+ibmappnLocalTgDestVirtual  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the destination node is
+           a Virtual node."
+      ::=  { ibmappnLocalTgEntry 3 }
+
+ibmappnLocalTgDlcData  OBJECT-TYPE
+      SYNTAX OCTET STRING  (SIZE (0..9))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "DLC specific data related to the link connection
+           network.
+           Token-Ring    - MAC/SAP
+           X.25 Switched - dial digits
+           X.21 Switched - dial digits
+           Circuit Swtch - dial digits"
+      ::=  { ibmappnLocalTgEntry 4 }
+
+ibmappnLocalTgRsn       OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "The resource sequence number is assigned and
+            controlled by the network node that owns this
+
+            resource.  This is always an even unsigned
+            number unless an error has occurred."
+      ::=  { ibmappnLocalTgEntry 5 }
+
+ibmappnLocalTgQuiescing OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the Transmission Group
+           is quiescing."
+      ::=  { ibmappnLocalTgEntry 6 }
+
+ibmappnLocalTgOperational OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the Transmission Group
+           is operational."
+      ::=  { ibmappnLocalTgEntry 7 }
+
+ibmappnLocalTgCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the CP-CP Sessions are
+           supported on this TG."
+      ::=  { ibmappnLocalTgEntry 8 }
+
+ibmappnLocalTgEffCap   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The effective capacity is an integer value that indicates
+           the actual kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776."
+      ::=  { ibmappnLocalTgEntry 9 }
+
+ibmappnLocalTgConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255."
+      ::=  { ibmappnLocalTgEntry 10 }
+
+ibmappnLocalTgByteCost  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+          Range is from 0 (lowest cost) to 255."
+      ::=  { ibmappnLocalTgEntry 11 }
+
+ibmappnLocalTgSecurity  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Security level for this TG."
+      ::=  { ibmappnLocalTgEntry 12 }
+
+ibmappnLocalTgDelay  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Relative amount of time that it takes for a signal to
+            travel the length of the logical link.  This time is
+            represented in micro seconds, with some of the more
+            common values enumerated."
+      ::=  { ibmappnLocalTgEntry 13 }
+
+ibmappnLocalTgModemClass  OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "This is used to have multiple images for a
+            connection network.  For a connection network
+            it is the same as in the TG vector and for
+            a non-connection network it is zero."
+      ::=  { ibmappnLocalTgEntry 14 }
+
+ibmappnLocalTgUsr1  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Value of the first user-defined TG
+          characteristic for this TG.
+          Range is 0-255."
+      ::=  { ibmappnLocalTgEntry 15 }
+
+ibmappnLocalTgUsr2  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Value of the second user-defined TG
+          characteristic for this TG.
+          Range is 0-255."
+      ::=  { ibmappnLocalTgEntry 16 }
+
+ibmappnLocalTgUsr3  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Value of the third user-defined TG
+          characteristic for this TG.
+          Range is 0-255."
+      ::=  { ibmappnLocalTgEntry 17 }
+
+-- This section applies only to network nodes.
+-- It contains end node topology information known to serving
+-- network node.
+-- The first table contains information about all end nodes
+-- known to this node.
+--
+--  The TG  table contains information about all of the TGs owned
+--  by these end nodes.
+
+ibmappnLocalEnTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnLocalEnEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Portion of the APPN topology
+            database that describes the end
+            nodes known to this node."
+      ::= { ibmappnLocalEnTopology 1 }
+
+ibmappnLocalEnEntry OBJECT-TYPE
+      SYNTAX IbmappnLocalEnEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by the end node CPname."
+      INDEX
+             {ibmappnLocalEnName}
+      ::= { ibmappnLocalEnTable 1 }
+
+IbmappnLocalEnEntry ::= SEQUENCE {
+
+      ibmappnLocalEnName                     DisplayString,
+      ibmappnLocalEnEntryTimeLeft            INTEGER,
+      ibmappnLocalEnType                     INTEGER
+                          }
+
+ibmappnLocalEnName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned fully-qualified
+          name of end node in the format NETID.CPNAME."
+      ::=  { ibmappnLocalEnEntry 1 }
+
+ibmappnLocalEnEntryTimeLeft   OBJECT-TYPE
+      SYNTAX INTEGER (0..31)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Number of days before deletion of this
+           end node entry. Range is 0-31."
+      ::=  { ibmappnLocalEnEntry 2 }
+
+ibmappnLocalEnType    OBJECT-TYPE
+      SYNTAX INTEGER {
+                     endnode(2),
+                     len(4)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Type of APPN node (must always be a len or end node)."
+      ::=  { ibmappnLocalEnEntry 3 }
+
+--APPN Local End node Transmission Group (TG) table
+
+-- This table describes the TGs associated with
+-- all of the end nodes known to this node.
+
+ibmappnLocalEnTgTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnLocalEnTgEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Table describing all of the TGs owned by the
+            end nodes known to this node.
+            The TG destination can be a virtual
+            node, network node, or end node."
+      ::= { ibmappnLocalEnTopology 2 }
+
+ibmappnLocalEnTgEntry OBJECT-TYPE
+      SYNTAX IbmappnLocalEnTgEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table requires multiple indexes to uniquely
+            identify each TG. They are originating CPname,
+            destination CPname, and the TG number."
+      INDEX
+             {ibmappnLocalEnTgOrigin,
+              ibmappnLocalEnTgDest,
+              ibmappnLocalEnTgNum}
+      ::= { ibmappnLocalEnTgTable 1 }
+
+IbmappnLocalEnTgEntry ::= SEQUENCE {
+      ibmappnLocalEnTgOrigin     DisplayString,
+      ibmappnLocalEnTgDest       DisplayString,
+      ibmappnLocalEnTgNum        INTEGER,
+      ibmappnLocalEnTgEntryTimeLeft INTEGER,
+      ibmappnLocalEnTgDestVirtual INTEGER,
+      ibmappnLocalEnTgDlcData    OCTET STRING,
+      ibmappnLocalEnTgOperational INTEGER,
+      ibmappnLocalEnTgCpCpSession INTEGER,
+      ibmappnLocalEnTgEffCap     INTEGER,
+      ibmappnLocalEnTgConnCost   INTEGER,
+      ibmappnLocalEnTgByteCost   INTEGER,
+      ibmappnLocalEnTgSecurity   INTEGER,
+      ibmappnLocalEnTgDelay      INTEGER,
+      ibmappnLocalEnTgModemClass INTEGER,
+      ibmappnLocalEnTgUsr1       INTEGER,
+      ibmappnLocalEnTgUsr2       INTEGER,
+      ibmappnLocalEnTgUsr3       INTEGER
+                                    }
+
+ibmappnLocalEnTgOrigin      OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for the
+           origination node for this TG.
+           This is the fully-qualified network name."
+      ::=  { ibmappnLocalEnTgEntry 1 }
+
+ibmappnLocalEnTgDest        OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for the
+           destination node for this TG.
+           This is the fully-qualified network name."
+      ::=  { ibmappnLocalEnTgEntry 2 }
+
+ibmappnLocalEnTgNum  OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number associated with this transmission group."
+      ::=  { ibmappnLocalEnTgEntry 3 }
+
+ibmappnLocalEnTgEntryTimeLeft   OBJECT-TYPE
+      SYNTAX INTEGER (0..31)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Number of days before deletion of this
+           end node TG entry. Range is 0-31."
+      ::=  { ibmappnLocalEnTgEntry 4 }
+
+ibmappnLocalEnTgDestVirtual  OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the destination node is
+           a virtual node."
+      ::=  { ibmappnLocalEnTgEntry 5 }
+
+ibmappnLocalEnTgDlcData  OBJECT-TYPE
+      SYNTAX OCTET STRING
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "DLC specific data related to the link connection
+           network.
+           Token-Ring    - MAC/SAP
+
+           X.25 Switched - dial digits
+           X.21 Switched - dial digits
+           Circuit Swtch - dial digits"
+      ::=  { ibmappnLocalEnTgEntry 6 }
+
+ibmappnLocalEnTgOperational OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether the Transmission Group is operational."
+      ::=  { ibmappnLocalEnTgEntry 7 }
+
+ibmappnLocalEnTgCpCpSession OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Indicates whether CP-CP sessions are supported on this TG."
+      ::=  { ibmappnLocalEnTgEntry 8 }
+
+ibmappnLocalEnTgEffCap   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "The effective capacity is an integer value that indicates
+           the actual kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776."
+      ::=  { ibmappnLocalEnTgEntry 9 }
+
+ibmappnLocalEnTgConnCost OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255."
+      ::=  { ibmappnLocalEnTgEntry 10 }
+
+ibmappnLocalEnTgByteCost  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Relative cost of transmitting a byte over this link.
+          Range is from 0, which means no cost, to 255."
+      ::=  { ibmappnLocalEnTgEntry 11 }
+
+ibmappnLocalEnTgSecurity  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Security level for this TG."
+      ::=  { ibmappnLocalEnTgEntry 12 }
+
+ibmappnLocalEnTgDelay  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Relative amount of time that it takes for a signal to
+            travel the length of the logical link.  This time is
+            represented in micro seconds, with some of the more
+            common values enumerated."
+      ::=  { ibmappnLocalEnTgEntry 13 }
+
+ibmappnLocalEnTgModemClass  OBJECT-TYPE
+      SYNTAX INTEGER (0..65535)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "This is used to have multiple images for a
+            connection network.  For a connection network
+            it is the same as in the TG vector and for
+             a non connection network it is zero."
+      ::=  { ibmappnLocalEnTgEntry 14 }
+
+ibmappnLocalEnTgUsr1  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "First user-defined TG characteristic
+          for this TG. Range of values is 0-255."
+      ::=  { ibmappnLocalEnTgEntry 15 }
+
+ibmappnLocalEnTgUsr2  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Second user-defined TG characteristic
+           for this TG. Range of values is 0-255."
+      ::=  { ibmappnLocalEnTgEntry 16 }
+
+ibmappnLocalEnTgUsr3  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Third user-defined TG characteristic
+           for this TG. Range of values is 0-255."
+      ::=  { ibmappnLocalEnTgEntry 17 }
+
+-- ************** The APPN Directory group **********************
+ibmappnDir      OBJECT IDENTIFIER ::= { ibmappn 5  }
+ibmappnDirPerf  OBJECT IDENTIFIER ::= { ibmappnDir 1 }
+
+-- The APPN Directory Group
+
+-- The APPN Directory Database
+
+-- Each APPN network node maintains directories containing
+-- information on which LUs (applications) are available and
+-- where they are located.  LUs can be located within an APPN
+-- network node or in any of the attached end nodes.
+
+--  Max Cache Directory Entries
+--  Current Number of Cache Entries
+--  Current Number Home Entries
+--  Current Number of Registered Entries
+--  number of directed locates sent
+--  number of directed locates received
+--  number of broadcast locates sent
+--  number of broadcast locates received
+--  Number of locates returned with a found
+--  Number of locates returned with a not found
+--  Number of outstanding Locates
+--  Directory table  (Repeated for each Serving NN)
+
+  --  Serving Network Node Fully Qualified CP Name
+
+--  LU Groups within Directory table (one for each LU)
+
+  --  Fully-qualified LU Name
+  --  Owning fully-qualified CP Name
+ --  TP Name
+  --  Resource location     (local/domain/cross-domain)
+  --  Entry type (home,Register/cache)
+  --  Wildcard              (yes/no)
+
+ibmappnDirMaxCaches OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Maximum number of cache entries allowed. This
+           is an administratively assigned value."
+      ::=  { ibmappnDirPerf 1 }
+
+ibmappnDirCurCaches OBJECT-TYPE
+      SYNTAX Gauge
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Current number of cache entries."
+      ::=  { ibmappnDirPerf 2 }
+
+ibmappnDirCurHomeEntries  OBJECT-TYPE
+      SYNTAX Gauge
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Current number of home entries."
+      ::=  { ibmappnDirPerf 3 }
+
+ibmappnDirRegEntries OBJECT-TYPE
+      SYNTAX Gauge
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Current number of registered entries."
+      ::=  { ibmappnDirPerf 4 }
+
+ibmappnDirInLocates    OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of directed locates received."
+      ::=  { ibmappnDirPerf 5 }
+
+ibmappnDirInBcastLocates  OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of broadcast locates received."
+      ::=  { ibmappnDirPerf 6 }
+
+ibmappnDirOutLocates   OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of directed locates sent."
+      ::=  { ibmappnDirPerf 7 }
+
+ibmappnDirOutBcastLocates   OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of broadcast locates sent."
+      ::=  { ibmappnDirPerf 8 }
+
+ibmappnDirNotFoundLocates   OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of directed locates returned with a 'not found'."
+      ::=  { ibmappnDirPerf 9 }
+
+ibmappnDirNotFoundBcastLocates OBJECT-TYPE
+      SYNTAX Counter
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Number of broadcast locates returned with
+           a not found."
+      ::=  { ibmappnDirPerf 10 }
+
+ibmappnDirLocateOutstands  OBJECT-TYPE
+      SYNTAX Gauge
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Current number of outstanding locates,
+          both directed and broadcast.  This value
+          varies. A value of zero indicates
+          that no locates are unanswered."
+      ::=  { ibmappnDirPerf 11 }
+
+--APPN Directory table
+
+-- This table contains information about all known
+-- LUs and TPs.
+
+ibmappnDirTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnDirEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Table containing information about
+           all known LUs and TPs."
+      ::= { ibmappnDir 2 }
+
+ibmappnDirEntry OBJECT-TYPE
+      SYNTAX IbmappnDirEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by the LU name."
+      INDEX
+             {ibmappnDirLuName}
+      ::= { ibmappnDirTable 1 }
+
+IbmappnDirEntry ::= SEQUENCE {
+      ibmappnDirLuName                   DisplayString,
+      ibmappnDirServerName               DisplayString,
+      ibmappnDirLuOwnerName              DisplayString,
+      ibmappnDirLuLocation               INTEGER,
+      ibmappnDirType                     INTEGER,
+      ibmappnDirWildCard                 INTEGER
+                             }
+
+ibmappnDirLuName          OBJECT-TYPE
+      SYNTAX DisplayString  (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Fully-qualified network LU name in the
+           domain of the serving network node."
+      ::=  { ibmappnDirEntry 1 }
+
+ibmappnDirServerName        OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Fully-qualified control point (CP) name of the
+            network node server.  For unassociated end node
+            entries, the end node fully-qualified name
+            is returned."
+      ::=  { ibmappnDirEntry 2 }
+
+ibmappnDirLuOwnerName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (3..17))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Fully-qualified CP name of the node at which
+           the LU is located.  This name is the same as the
+           serving NN name when the LU is located at a
+           network node or an unassociated end node.  It is
+           also the same as the fully-qualified LU name
+           when this is the control point LU for this node."
+      ::=  { ibmappnDirEntry 3 }
+
+ibmappnDirLuLocation        OBJECT-TYPE
+      SYNTAX INTEGER {
+                     local(1),     --Local
+                     domain(2),    --Domain
+                     xdomain(3)    --Cross Domain
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Specifies the location of the LU."
+      ::=  { ibmappnDirEntry 4 }
+
+ibmappnDirType             OBJECT-TYPE
+      SYNTAX INTEGER {
+                     home(1),      --defined as home entry
+                     cache(2),     --learned over time
+                     registered(3) --registered by end node
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Directory types are:
+            1 - Home
+                  The LU is in the domain of the local network node
+                  and the LU information has been configured at the
+                  local node.
+
+            2 - Cache
+                  The LU has previously been located by a broadcast
+                  search and the location information has been saved.
+
+            3 - Register
+
+                  The LU is at an end node that is in the domain
+                  of the local network node.  Registered entries
+                  are registered by the served end node."
+      ::=  { ibmappnDirEntry 5 }
+
+ibmappnDirWildCard         OBJECT-TYPE
+      SYNTAX INTEGER {
+                      other(1),
+                      explicit-entry(2),
+                      partial-wildcard(3),
+                      full-wildcard(4)
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "1 - Other means unknown type of LU entry.
+           2 - Expliced-entry means the full LUNAME will be used
+               for locating this LU.
+           3 - Partial-wildcard means only the non-blank portions
+               of the LUNAME will be used for locating this LU.
+           4 - Full-wildcard means all LUNAMES will be directed
+               to this LU."
+      ::=  { ibmappnDirEntry 6 }
+
+-- ************** The APPN Class of Service group ***************
+
+ibmappnCos  OBJECT IDENTIFIER ::= { ibmappn 6  } --APPN COS
+
+-- The APPN Class of Service (COS)
+
+-- Class of Service is a means of expressing the quality of the routes
+-- and the transmission priority of traffic which flows on these routes.
+-- The quality of routes is specified by two tables, a COS weight table
+-- for TGs and a COS weight table for nodes.  These COS tables are
+-- administratively assigned at each APPN node. Seven default tables
+
+-- for TGs and a COS weight table for Nodes.  These COS tables are
+-- administratively assigned at each APPN node with seven default tables
+-- being provided by IBM.
+--
+--
+--  COS Name
+--        Unqualified name identifying the class of service.
+--  Transmission priority
+
+--        Transmission priority associated with this class of service
+--   COS Node Row Table
+--          At least one node row must be specified. The default
+--          COS tables specify 8 rows.
+--     Node Row Weight
+--            Numeric value between 0 and 255 inclusive indicating
+--            the weight associated with this row.
+--     Route addition resist (min)
+--            Numeric value between 0 and 255 inclusive indicating
+--            the minimum route addition resistance for this row.
+--     Route addition resist (max)
+--            Numeric value between 0 and 255 inclusive indicating
+--            the maximum route addition resistance for this row.
+--     Congestion          (min)
+--            Indicates whether this class of service for this row
+--            will accept congestion. Yes or No must be specified.
+--     Congestion          (max)
+--            Indicates whether this Class of Service for this row
+--            will accept congestion. Yes or No must be specified.
+--
+--   COS TG Row table
+--          At least one TG row must be specified with the defaults
+--          COS tables specify 8 rows.
+--     TG Row Weight
+--            Numeric value between 0 and 255 inclusive indicating
+--            the weight associated with this row.
+--     Effective capacity  (min)
+--            Indicates the lowest acceptable value for this row.
+--     Effective capacity  (max)
+--            Indicates the highest required value for this row.
+--     Cost per connect time  (min)
+--            Indicates the lowest connect cost per unit time value
+--            for this row.  This value is between 0 and 255 inclusive.
+--     Cost per connect time  (max)
+--            Indicates the highest connect cost per unit time value
+--            for this row.  This value is between 0 and 255 inclusive.
+--     Cost per byte       (min)
+--            Indicates the lowest cost per byte value
+--            for this row.  This value is between 0 and 255 inclusive.
+--     Cost per byte       (max)
+--            Indicates the highest cost per byte value
+--            for this row.  This value is between 0 and 255 inclusive.
+--     Security            (min)
+--            Indicates the lowest acceptable value for security
+--            for this row.  This value is one of seven values.
+--     Security            (max)
+--            Indicates the highest acceptable value for security
+--            for this row.  This value is one of seven values.
+
+--     Propagation delay   (min)
+--            Indicates the lowest acceptable propagation delay value
+--            for this row.
+--     Propagation delay   (max)
+--            Indicates the highest acceptable propagation delay value
+--            for this row.
+--     User defined 1      (min)
+--            Indicates the lowest acceptable value
+--            for this row.  This value is between 0 and 255 inclusive.
+--     User defined 1      (max)
+--            Indicates the highest acceptable value
+--            for this row.  This value is between 0 and 255 inclusive.
+--     User defined 2      (min)
+--            Same as user defined 1
+--     User defined 2      (max)
+--            Same as user defined 1
+--     User defined 3      (min)
+--            Same as user defined 1
+--     User defined 3      (max)
+--            Same as user defined 1
+--
+--
+--
+--Due to SNMP ASN.1 limitations the COS table is defined
+--in the following format.
+--
+-- MODE name table
+--  MODE Name (index)
+--  COS Name
+--
+-- COS name table
+--  COS Name (index)
+--  Transmission priority
+--
+-- COS node row table
+--  COS Name (index1)
+--  Index2
+--  Node Row Weight
+--  Rte addition resist (min)
+--  Rte addition resist (max)
+--  Congestion          (min)
+--  Congestion          (max)
+--
+-- COS TG row table
+--  COS Name (index1)
+--  Index
+--  TG Row Weight
+--  Effective capacity  (min)
+
+--  Effective capacity  (max)
+--  Cost per conn time  (min)
+--  Cost per conn time  (max)
+--  cost per byte       (min)
+--  cost per byte       (max)
+--  Security            (min)
+--  Security            (max)
+--  Propagation delay   (min)
+--  Propagation delay   (max)
+--  User defined 1      (min)
+--  User defined 1      (max)
+--  User defined 2      (min)
+--  User defined 2      (max)
+--  User defined 3      (min)
+--  User defined 3      (max)
+--
+-- **************************************************************
+
+ibmappnCosModeTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnCosModeEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+          "Table representing all of the defined
+          mode names for this node.  The table
+          contains the matching COS name."
+      ::= { ibmappnCos 1 }
+
+ibmappnCosModeEntry OBJECT-TYPE
+      SYNTAX IbmappnCosModeEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table is indexed by the Mode Name."
+      INDEX
+             {ibmappnCosModeName}
+      ::= { ibmappnCosModeTable 1 }
+
+IbmappnCosModeEntry ::= SEQUENCE {
+      ibmappnCosModeName                  DisplayString,
+      ibmappnCosModeCosName               DisplayString
+                                     }
+
+ibmappnCosModeName              OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Administratively-assigned name for this
+            mode entry."
+      ::=  { ibmappnCosModeEntry 1 }
+
+ibmappnCosModeCosName    OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "An administratively assigned name for this
+           Class of Service."
+      ::=  { ibmappnCosModeEntry 2 }
+
+-- **************************************************************
+
+ibmappnCosNameTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnCosNameEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+          "Table representing all of the defined class-of-service
+           names for this node.  The COS node and TG tables are
+           accessed using the same index, which is the COS name."
+      ::= { ibmappnCos 2 }
+
+ibmappnCosNameEntry OBJECT-TYPE
+      SYNTAX IbmappnCosNameEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The COS name is the index to this table."
+      INDEX
+             {ibmappnCosName}
+      ::= { ibmappnCosNameTable 1 }
+
+IbmappnCosNameEntry ::= SEQUENCE {
+      ibmappnCosName                     DisplayString,
+      ibmappnCosTransPriority            INTEGER
+
+                                 }
+
+ibmappnCosName              OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Administratively-assigned name for this
+           class of service."
+      ::=  { ibmappnCosNameEntry 1 }
+
+ibmappnCosTransPriority OBJECT-TYPE
+      SYNTAX INTEGER {
+                     low(1),               --X'01'
+                     medium(2),            --X'02'
+                     high(3),              --X'03'
+                     network(4)            --X'04'
+                     }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Transmission priority for this
+            class of service.  Values are:
+              Low
+              Medium
+              High
+              Network                                      "
+      ::=  { ibmappnCosNameEntry 2 }
+
+ibmappnCosNodeRowTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnCosNodeRowEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "This table contains all node-row information for all
+            class of service in this node."
+      ::= { ibmappnCos 3 }
+
+ibmappnCosNodeRowEntry OBJECT-TYPE
+      SYNTAX IbmappnCosNodeRowEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The COS name is the first index and a integer
+            is the second index to insure a unique index."
+      INDEX
+             {ibmappnCosNodeRowName,
+              ibmappnCosNodeRowIndex}
+      ::= { ibmappnCosNodeRowTable 1 }
+
+IbmappnCosNodeRowEntry ::= SEQUENCE {
+      ibmappnCosNodeRowName                 DisplayString,
+      ibmappnCosNodeRowIndex                INTEGER,
+--Node Row Group
+      ibmappnCosNodeRowWgt                  DisplayString,
+      ibmappnCosNodeRowResistMin            INTEGER,
+      ibmappnCosNodeRowResistMax            INTEGER,
+      ibmappnCosNodeRowMinCongestAllow      INTEGER,
+      ibmappnCosNodeRowMaxCongestAllow      INTEGER
+                                 }
+
+ibmappnCosNodeRowName              OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Administratively-assigned name for this
+           class of service."
+      ::=  { ibmappnCosNodeRowEntry 1 }
+
+ibmappnCosNodeRowIndex     OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Index of COS name.  This same value is used
+            to access the node and TG COS tables.
+            Range of values is 0-255."
+      ::=  { ibmappnCosNodeRowEntry 2 }
+
+--Node Row Group
+
+ibmappnCosNodeRowWgt     OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Weight to be associated with the nodes
+            that fit the criteria specified by this node row."
+      ::=  { ibmappnCosNodeRowEntry 3 }
+
+ibmappnCosNodeRowResistMin       OBJECT-TYPE
+      SYNTAX INTEGER   (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Minimum route addition resistance value
+           for this node. Range of values is 0-255.
+           The lower the value, the more desirable
+           the node is for intermediate routing."
+      ::=  { ibmappnCosNodeRowEntry 4 }
+
+ibmappnCosNodeRowResistMax  OBJECT-TYPE
+      SYNTAX INTEGER   (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Maximum route addition resistance value
+           for this node. Range of values is 0-255.
+           The lower the value, the more desirable
+           the node is for intermediate routing."
+      ::=  { ibmappnCosNodeRowEntry 5 }
+
+ibmappnCosNodeRowMinCongestAllow OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether low congestion will be
+            tolerated.  The minimum and maximum parameters
+            will allow specifying either low-congested,
+            high-congested, or either to be used."
+      ::=  { ibmappnCosNodeRowEntry 6 }
+
+ibmappnCosNodeRowMaxCongestAllow OBJECT-TYPE
+      SYNTAX INTEGER {yes(1), no(2)}
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Indicates whether high congestion will be
+            tolerated.  The minimum and maximum parameters
+
+            will allow specifying either low-congested,
+            high-congested, or either to be used."
+      ::=  { ibmappnCosNodeRowEntry 7 }
+
+-- COS TG row table
+--  Index
+--  TG Row Weight
+--  Effective capacity  (min)
+--  Effective capacity  (max)
+--  Cost per conn time  (min)
+--  Cost per conn time  (max)
+--  cost per byte       (min)
+--  cost per byte       (max)
+--  Security            (min)
+--  Security            (max)
+--  Propagation delay   (min)
+--  Propagation delay   (max)
+--  User defined 1      (min)
+--  User defined 1      (max)
+--  User defined 2      (min)
+--  User defined 2      (max)
+--  User defined 3      (min)
+--  User defined 3      (max)
+--
+
+ibmappnCosTgRowTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF IbmappnCosTgRowEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "Table containing all the Tg-row information for all
+            class of service defined in this node."
+      ::= { ibmappnCos 4 }
+
+ibmappnCosTgRowEntry OBJECT-TYPE
+      SYNTAX IbmappnCosTgRowEntry
+      ACCESS not-accessible
+      STATUS mandatory
+      DESCRIPTION
+           "The TgRowName and the TgRowIndex are the index
+           for this table."
+      INDEX
+             {ibmappnCosTgRowName,
+              ibmappnCosTgRowIndex}
+      ::= { ibmappnCosTgRowTable 1 }
+
+IbmappnCosTgRowEntry ::= SEQUENCE {
+      ibmappnCosTgRowName                 DisplayString,
+      ibmappnCosTgRowIndex                INTEGER,
+--TG Row Group
+      ibmappnCosTgRowWgt                   DisplayString,
+      ibmappnCosTgRowEffCapMin             INTEGER,
+      ibmappnCosTgRowEffCapMax             INTEGER,
+      ibmappnCosTgRowConnCostMin           INTEGER,
+      ibmappnCosTgRowConnCostMax           INTEGER,
+      ibmappnCosTgRowByteCostMin           INTEGER,
+      ibmappnCosTgRowByteCostMax           INTEGER,
+      ibmappnCosTgRowSecurityMin           INTEGER,
+      ibmappnCosTgRowSecurityMax           INTEGER,
+      ibmappnCosTgRowDelayMin              INTEGER,
+      ibmappnCosTgRowDelayMax              INTEGER,
+      ibmappnCosTgRowUsr1Min               INTEGER,
+      ibmappnCosTgRowUsr1Max               INTEGER,
+      ibmappnCosTgRowUsr2Min               INTEGER,
+      ibmappnCosTgRowUsr2Max               INTEGER,
+      ibmappnCosTgRowUsr3Min               INTEGER,
+      ibmappnCosTgRowUsr3Max               INTEGER
+                              }
+
+ibmappnCosTgRowName              OBJECT-TYPE
+      SYNTAX DisplayString (SIZE (1..8))
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Administratively-assigned name for this
+           class of service."
+      ::=  { ibmappnCosTgRowEntry 1 }
+
+ibmappnCosTgRowIndex     OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Index of COS name.  This same value is used
+            to access the node and TG COS tables."
+      ::=  { ibmappnCosTgRowEntry 2 }
+
+--TG Row
+
+ibmappnCosTgRowWgt       OBJECT-TYPE
+      SYNTAX DisplayString
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Weight to be associated with the nodes
+            that fit the criteria specified by this tg-row."
+      ::=  { ibmappnCosTgRowEntry 3 }
+
+ibmappnCosTgRowEffCapMin   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Minimum acceptable speed for this Class of Service.
+           The effective capacity is an integer value that indicates
+           the actual kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776."
+      ::=  { ibmappnCosTgRowEntry 4 }
+
+ibmappnCosTgRowEffCapMax   OBJECT-TYPE
+      SYNTAX INTEGER
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Maximum acceptable speed for this Class of Service.
+           The effective capacity is an integer value that indicates
+           the actual kilo bits per second.
+           It is derived from the link bandwidth and maximum load
+           factor with the range of 0 thru 603,979,776."
+      ::=  { ibmappnCosTgRowEntry 5 }
+
+ibmappnCosTgRowConnCostMin OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Minimum acceptable cost per connect time
+           for this Class of Service.
+           Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255."
+      ::=  { ibmappnCosTgRowEntry 6 }
+
+ibmappnCosTgRowConnCostMax OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+          "Maximum acceptable cost per connect time
+           for this Class of Service.
+           Cost per connect time: a value representing
+           the relative cost per unit of time to use
+           the TG. Range is from 0, which means no cost,
+           to 255."
+      ::=  { ibmappnCosTgRowEntry 7 }
+
+ibmappnCosTgRowByteCostMin  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Minimum acceptable cost per byte
+            for this Class of Service."
+      ::=  { ibmappnCosTgRowEntry 8 }
+
+ibmappnCosTgRowByteCostMax  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Maximum acceptable cost per byte
+            for this Class of Service."
+      ::=  { ibmappnCosTgRowEntry 9 }
+
+ibmappnCosTgRowSecurityMin  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Minimum acceptable security
+
+            for this Class of Service."
+      ::=  { ibmappnCosTgRowEntry 10 }
+
+ibmappnCosTgRowSecurityMax  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     nonsecure(1),                --X'01'
+                     publicSwitchedNetwork(32),   --X'20'
+                     undergroundCable(64),        --X'40'
+                     secureConduit(96),           --X'60'
+                     guardedConduit(128),         --X'80'
+                     encrypted(160),              --X'A0'
+                     guardedRadiation(192)        --X'C0'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Maximum acceptable security
+            for this Class of Service."
+      ::=  { ibmappnCosTgRowEntry 11 }
+
+ibmappnCosTgRowDelayMin  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+        "Minimum acceptable propagation delay for this class of service.
+         Relative amount of time that it takes for a signal to travel
+         the length of the logical link.  This time is represented in
+         micro seconds, with the more values enumerated."
+      ::=  { ibmappnCosTgRowEntry 12 }
+
+ibmappnCosTgRowDelayMax  OBJECT-TYPE
+      SYNTAX INTEGER {
+                     minimum(0),                 --X'00'
+                     negligible(384),            --X'4C'
+                     terrestrial(9216),          --X'71'
+                     packet(147456),             --X'91'
+                     long(294912),               --X'99'
+
+                     maximum(2013265920)         --X'FF'
+             }
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+        "Maximum acceptable propagation delay for this class of service.
+         Relative amount of time that it takes for a signal to travel
+         the length of the logical link.  This time is represented in
+         micro seconds, with the more values enumerated."
+      ::=  { ibmappnCosTgRowEntry 13 }
+
+ibmappnCosTgRowUsr1Min  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Minimum acceptable value for this
+            user defined characteristic.
+            Range of values is 0-255."
+      ::=  { ibmappnCosTgRowEntry 14 }
+
+ibmappnCosTgRowUsr1Max  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Maximum acceptable value for this
+            user defined characteristic.
+            Range of values is 0-255."
+      ::=  { ibmappnCosTgRowEntry 15 }
+
+ibmappnCosTgRowUsr2Min  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Minimum acceptable value for this
+            user defined characteristic.
+            Range of values is 0-255."
+      ::=  { ibmappnCosTgRowEntry 16 }
+
+ibmappnCosTgRowUsr2Max  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "A Maximum acceptable value for this
+            user defined characteristic."
+      ::=  { ibmappnCosTgRowEntry 17 }
+
+ibmappnCosTgRowUsr3Min  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Minimum acceptable value for this
+            user defined characteristic.
+            Range of values is 0-255."
+      ::=  { ibmappnCosTgRowEntry 18 }
+
+ibmappnCosTgRowUsr3Max  OBJECT-TYPE
+      SYNTAX INTEGER (0..255)
+      ACCESS read-only
+      STATUS mandatory
+      DESCRIPTION
+           "Maximum acceptable value for this
+            user defined characteristic.
+            Range of values is 0-255."
+      ::=  { ibmappnCosTgRowEntry 19 }
+
+END
diff --git a/snmp_builder/mibs/IF-CAP-STACK-MIB.mib b/snmp_builder/mibs/IF-CAP-STACK-MIB.mib
new file mode 100644
index 0000000..3eeda21
--- /dev/null
+++ b/snmp_builder/mibs/IF-CAP-STACK-MIB.mib
@@ -0,0 +1,284 @@
+IF-CAP-STACK-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2
+      FROM SNMPv2-SMI         -- [RFC2578]
+    TruthValue
+      FROM SNMPv2-TC          -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF        -- [RFC2580]
+    ifStackGroup2, ifStackHigherLayer, ifStackLowerLayer
+      FROM IF-MIB             -- [RFC2863]
+    ifInvStackGroup
+      FROM IF-INVERTED-STACK-MIB -- [RFC2864]
+    ;
+
+  ifCapStackMIB MODULE-IDENTITY
+    LAST-UPDATED "200711070000Z"  -- November 07, 2007
+    ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group"
+    CONTACT-INFO
+      "WG charter:
+        http://www.ietf.org/html.charters/OLD/hubmib-charter.html
+
+      Mailing Lists:
+        General Discussion: hubmib@ietf.org
+
+        To Subscribe: hubmib-request@ietf.org
+        In Body: subscribe your_email_address
+
+      Chair:  Bert Wijnen
+      Postal: Alcatel-Lucent
+              Schagen 33
+              3461 GL Linschoten
+              Netherlands
+       Phone: +31-348-407-775
+       EMail: bwijnen@alcatel-lucent.com
+
+      Editor: Edward Beili
+      Postal: Actelis Networks Inc.
+              25 Bazel St., P.O.B. 10173
+              Petach-Tikva 10173
+              Israel
+       Phone: +972-3-924-3491
+       EMail: edward.beili@actelis.com"
+    DESCRIPTION
+      "The objects in this MIB module are used to describe
+      cross-connect capabilities of stacked (layered) interfaces,
+      complementing ifStackTable and ifInvStackTable defined in
+      IF-MIB and IF-INVERTED-STACK-MIB, respectively.
+
+      Copyright (C) The IETF Trust (2007).  This version
+      of this MIB module is part of RFC 5066;  see the RFC
+      itself for full legal notices."
+
+    REVISION    "200711070000Z"  -- November 07, 2007
+    DESCRIPTION "Initial version, published as RFC 5066."
+    ::= { mib-2 166 }
+
+   -- Sections of the module
+   -- Structured as recommended by [RFC4181], see
+   -- Appendix D: Suggested OID Layout
+
+   ifCapStackObjects     OBJECT IDENTIFIER ::= { ifCapStackMIB 1 }
+
+   ifCapStackConformance OBJECT IDENTIFIER ::= { ifCapStackMIB 2 }
+
+   -- Groups in the module
+
+   --
+   -- ifCapStackTable group
+   --
+
+   ifCapStackTable  OBJECT-TYPE
+     SYNTAX      SEQUENCE OF IfCapStackEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "This table, modeled after ifStackTable from IF-MIB,
+       contains information on the possible 'on-top-of'
+       relationships between the multiple sub-layers of network
+       interfaces (as opposed to actual relationships described in
+       ifStackTable).  In particular, it contains information on
+       which sub-layers MAY possibly run 'on top of' which other
+       sub-layers, as determined by cross-connect capability of the
+       device, where each sub-layer corresponds to a conceptual row
+       in the ifTable.  For example, when the sub-layer with ifIndex
+       value x can be connected to run on top of the sub-layer with
+       ifIndex value y, then this table contains:
+
+         ifCapStackStatus.x.y=true
+
+       The ifCapStackStatus.x.y row does not exist if it is
+       impossible to connect between the sub-layers x and y.
+
+       Note that for most stacked interfaces (e.g., 2BASE-TL)
+       there's always at least one higher-level interface (e.g., PCS
+       port) for each lower-level interface (e.g., PME) and at
+       least one lower-level interface for each higher-level
+       interface, that is, there is at least a single row with a
+       'true' status for any such existing value of x or y.
+
+       This table is read-only as it describes device capabilities."
+     REFERENCE
+       "IF-MIB, ifStackTable"
+     ::= { ifCapStackObjects 1 }
+
+   ifCapStackEntry  OBJECT-TYPE
+     SYNTAX      IfCapStackEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Information on a particular relationship between two
+       sub-layers, specifying that one sub-layer MAY possibly run
+       on 'top' of the other sub-layer.  Each sub-layer corresponds
+       to a conceptual row in the ifTable (interface index for
+       lower and higher layer, respectively)."
+     INDEX {
+       ifStackHigherLayer,
+       ifStackLowerLayer
+     }
+     ::= { ifCapStackTable 1 }
+
+   IfCapStackEntry ::= SEQUENCE {
+        ifCapStackStatus       TruthValue
+      }
+
+   ifCapStackStatus  OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The status of the 'cross-connect capability' relationship
+       between two sub-layers.  The following values can be returned:
+         true(1)         - indicates that the sub-layer interface,
+                           identified by the ifStackLowerLayer MAY
+                           be connected to run 'below' the sub-layer
+                           interface, identified by the
+                           ifStackHigherLayer index.
+         false(2)        - the sub-layer interfaces cannot be
+                           connected temporarily due to
+                           unavailability of the interface(s), e.g.,
+                           one of the interfaces is located on an
+                           absent pluggable module.
+
+       Note that lower-layer interface availability per higher-layer,
+       indicated by the value of 'true', can be constrained by
+       other parameters, for example, by the aggregation capacity of
+       a higher-layer interface or by the lower-layer interface in
+       question being already connected to another higher-layer
+       interface.  In order to ensure that a particular sub-layer can
+       be connected to another sub-layer, all respective objects
+       (e.g., ifCapStackTable, ifStackTable, and efmCuPAFCapacity for
+       EFMCu interfaces) SHALL be inspected.
+
+       This object is read-only, unlike ifStackStatus, as it
+       describes a cross-connect capability."
+     ::= { ifCapStackEntry 1 }
+
+   ifInvCapStackTable  OBJECT-TYPE
+     SYNTAX        SEQUENCE OF IfInvCapStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+       "A table containing information on the possible relationships
+       between the multiple sub-layers of network interfaces.  This
+       table, modeled after ifInvStackTable from
+       IF-INVERTED-STACK-MIB, is an inverse of the ifCapStackTable
+       defined in this MIB module.
+
+       In particular, this table contains information on which
+       sub-layers MAY run 'underneath' which other sub-layers, where
+       each sub-layer corresponds to a conceptual row in the ifTable.
+       For example, when the sub-layer with ifIndex value x MAY be
+       connected to run underneath the sub-layer with ifIndex value
+       y, then this table contains:
+
+          ifInvCapStackStatus.x.y=true
+
+       This table contains exactly the same number of rows as the
+       ifCapStackTable, but the rows appear in a different order.
+
+       This table is read-only as it describes a cross-connect
+       capability."
+     REFERENCE
+        "IF-INVERTED-STACK-MIB, ifInvStackTable"
+     ::= { ifCapStackObjects 2 }
+
+   ifInvCapStackEntry  OBJECT-TYPE
+     SYNTAX        IfInvCapStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+        "Information on a particular relationship between two sub-
+        layers, specifying that one sub-layer MAY run underneath the
+        other sub-layer.  Each sub-layer corresponds to a conceptual
+        row in the ifTable."
+     INDEX { ifStackLowerLayer, ifStackHigherLayer }
+     ::= { ifInvCapStackTable 1 }
+
+    IfInvCapStackEntry ::= SEQUENCE {
+      ifInvCapStackStatus       TruthValue
+    }
+
+   ifInvCapStackStatus  OBJECT-TYPE
+     SYNTAX         TruthValue
+     MAX-ACCESS     read-only
+     STATUS         current
+     DESCRIPTION
+        "The status of the possible 'cross-connect capability'
+        relationship between two sub-layers.
+
+        An instance of this object exists for each instance of the
+        ifCapStackStatus object, and vice versa.  For example, if the
+        variable ifCapStackStatus.H.L exists, then the variable
+        ifInvCapStackStatus.L.H must also exist, and vice versa.  In
+        addition, the two variables always have the same value.
+
+        The ifInvCapStackStatus object is read-only, as it describes
+        a cross-connect capability."
+     REFERENCE
+        "ifCapStackStatus"
+     ::= { ifInvCapStackEntry 1 }
+
+  --
+  -- Conformance Statements
+  --
+
+   ifCapStackGroups      OBJECT IDENTIFIER ::=
+        { ifCapStackConformance 1 }
+
+   ifCapStackCompliances OBJECT IDENTIFIER ::=
+        { ifCapStackConformance 2 }
+
+   -- Units of Conformance
+
+   ifCapStackGroup OBJECT-GROUP
+     OBJECTS {
+       ifCapStackStatus,
+       ifInvCapStackStatus
+     }
+     STATUS  current
+     DESCRIPTION
+       "A collection of objects providing information on the
+       cross-connect capability of multi-layer (stacked) network
+       interfaces."
+     ::= { ifCapStackGroups 1 }
+
+  -- Compliance Statements
+
+   ifCapStackCompliance MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+       "The compliance statement for SNMP entities, which provide
+       information on the cross-connect capability of multi-layer
+       (stacked) network interfaces, with flexible cross-connect
+       between the sub-layers."
+
+     MODULE  -- this module
+       MANDATORY-GROUPS {
+         ifCapStackGroup
+       }
+
+       OBJECT       ifCapStackStatus
+       SYNTAX       TruthValue { true(1) }
+       DESCRIPTION
+         "Support for the false(2) value is OPTIONAL for
+         implementations supporting pluggable interfaces."
+
+       OBJECT       ifInvCapStackStatus
+       SYNTAX       TruthValue { true(1) }
+       DESCRIPTION
+         "Support for the false(2) value is OPTIONAL for
+         implementations supporting pluggable interfaces."
+
+     MODULE  IF-MIB
+       MANDATORY-GROUPS {
+         ifStackGroup2
+       }
+
+     MODULE  IF-INVERTED-STACK-MIB
+       MANDATORY-GROUPS {
+         ifInvStackGroup
+       }
+     ::= { ifCapStackCompliances 1 }
+END
diff --git a/snmp_builder/mibs/IF-INVERTED-STACK-MIB.mib b/snmp_builder/mibs/IF-INVERTED-STACK-MIB.mib
new file mode 100644
index 0000000..eb8797b
--- /dev/null
+++ b/snmp_builder/mibs/IF-INVERTED-STACK-MIB.mib
@@ -0,0 +1,149 @@
+IF-INVERTED-STACK-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, mib-2      FROM SNMPv2-SMI
+  RowStatus                                FROM SNMPv2-TC
+  MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+  ifStackGroup2,
+  ifStackHigherLayer, ifStackLowerLayer    FROM IF-MIB;
+
+ifInvertedStackMIB MODULE-IDENTITY
+  LAST-UPDATED "200006140000Z"
+  ORGANIZATION "IETF Interfaces MIB Working Group"
+  CONTACT-INFO
+          "   Keith McCloghrie
+              Cisco Systems, Inc.
+              170 West Tasman Drive
+              San Jose, CA  95134-1706
+              US
+
+              408-526-5260
+              kzm@cisco.com"
+  DESCRIPTION
+          "The MIB module which provides the Inverted Stack Table for
+          interface sub-layers."
+  REVISION      "200006140000Z"
+  DESCRIPTION
+          "Initial revision, published as RFC 2864"
+  ::= { mib-2 77 }
+
+ifInvMIBObjects OBJECT IDENTIFIER ::= { ifInvertedStackMIB 1 }
+
+--
+--           The Inverted Interface Stack Group
+--
+
+ifInvStackTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF IfInvStackEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+          "A table containing information on the relationships between
+
+          the multiple sub-layers of network interfaces.  In
+          particular, it contains information on which sub-layers run
+          'underneath' which other sub-layers, where each sub-layer
+          corresponds to a conceptual row in the ifTable.  For
+          example, when the sub-layer with ifIndex value x runs
+          underneath the sub-layer with ifIndex value y, then this
+          table contains:
+
+            ifInvStackStatus.x.y=active
+
+          For each ifIndex value, z, which identifies an active
+          interface, there are always at least two instantiated rows
+          in this table associated with z.  For one of these rows, z
+          is the value of ifStackHigherLayer; for the other, z is the
+          value of ifStackLowerLayer.  (If z is not involved in
+          multiplexing, then these are the only two rows associated
+          with z.)
+
+          For example, two rows exist even for an interface which has
+          no others stacked on top or below it:
+
+            ifInvStackStatus.z.0=active
+            ifInvStackStatus.0.z=active
+
+          This table contains exactly the same number of rows as the
+          ifStackTable, but the rows appear in a different order."
+   REFERENCE
+          "ifStackTable of RFC 2863"
+   ::= { ifInvMIBObjects 1 }
+
+ifInvStackEntry  OBJECT-TYPE
+   SYNTAX        IfInvStackEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+          "Information on a particular relationship between two sub-
+          layers, specifying that one sub-layer runs underneath the
+          other sub-layer.  Each sub-layer corresponds to a conceptual
+          row in the ifTable."
+   INDEX { ifStackLowerLayer, ifStackHigherLayer }
+   ::= { ifInvStackTable 1 }
+
+IfInvStackEntry ::=
+  SEQUENCE {
+      ifInvStackStatus       RowStatus
+   }
+
+ifInvStackStatus  OBJECT-TYPE
+  SYNTAX         RowStatus
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+          "The status of the relationship between two sub-layers.
+
+          An instance of this object exists for each instance of the
+          ifStackStatus object, and vice versa.  For example, if the
+          variable ifStackStatus.H.L exists, then the variable
+          ifInvStackStatus.L.H must also exist, and vice versa.  In
+          addition, the two variables always have the same value.
+
+          However, unlike ifStackStatus, the ifInvStackStatus object
+          is NOT write-able.  A network management application wishing
+          to change a relationship between sub-layers H and L cannot
+          do so by modifying the value of ifInvStackStatus.L.H, but
+          must instead modify the value of ifStackStatus.H.L.  After
+          the ifStackTable is modified, the change will be reflected
+          in this table."
+  ::= { ifInvStackEntry 1 }
+
+-- conformance information
+
+ifInvConformance OBJECT IDENTIFIER ::= { ifInvMIBObjects 2 }
+
+ifInvGroups      OBJECT IDENTIFIER ::= { ifInvConformance 1 }
+ifInvCompliances OBJECT IDENTIFIER ::= { ifInvConformance 2 }
+
+-- compliance statements
+
+ifInvCompliance MODULE-COMPLIANCE
+  STATUS  current
+  DESCRIPTION
+          "The compliance statement for SNMP entities which provide
+          inverted information on the layering of network interfaces."
+
+  MODULE  -- this module
+      MANDATORY-GROUPS { ifInvStackGroup }
+
+      OBJECT       ifInvStackStatus
+      SYNTAX       INTEGER { active(1) }
+      DESCRIPTION
+          "Support is only required for 'active'."
+
+  MODULE  IF-MIB
+      MANDATORY-GROUPS { ifStackGroup2 }
+  ::= { ifInvCompliances 1 }
+
+-- units of conformance
+
+ifInvStackGroup    OBJECT-GROUP
+  OBJECTS { ifInvStackStatus }
+  STATUS  current
+  DESCRIPTION
+          "A collection of objects providing inverted information on
+          the layering of MIB-II interfaces."
+  ::= { ifInvGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/IF-MIB.mib b/snmp_builder/mibs/IF-MIB.mib
new file mode 100644
index 0000000..7704f0c
--- /dev/null
+++ b/snmp_builder/mibs/IF-MIB.mib
@@ -0,0 +1,1814 @@
+IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Counter64,
+    Integer32, TimeTicks, mib-2,
+    NOTIFICATION-TYPE                        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DisplayString,
+    PhysAddress, TruthValue, RowStatus,
+    TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                       FROM SNMPv2-CONF
+    snmpTraps                                FROM SNMPv2-MIB
+    IANAifType                               FROM IANAifType-MIB;
+
+ifMIB MODULE-IDENTITY
+    LAST-UPDATED "200006140000Z"
+    ORGANIZATION "IETF Interfaces MIB Working Group"
+    CONTACT-INFO
+            "   Keith McCloghrie
+                Cisco Systems, Inc.
+                170 West Tasman Drive
+                San Jose, CA  95134-1706
+                US
+
+                408-526-5260
+                kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module to describe generic objects for network
+            interface sub-layers.  This MIB is an updated version of
+            MIB-II's ifTable, and incorporates the extensions defined in
+            RFC 1229."
+
+    REVISION      "200006140000Z"
+    DESCRIPTION
+            "Clarifications agreed upon by the Interfaces MIB WG, and
+            published as RFC 2863."
+    REVISION      "199602282155Z"
+    DESCRIPTION
+            "Revisions made by the Interfaces MIB WG, and published in
+            RFC 2233."
+    REVISION      "199311082155Z"
+    DESCRIPTION
+            "Initial revision, published as part of RFC 1573."
+    ::= { mib-2 31 }
+
+ifMIBObjects OBJECT IDENTIFIER ::= { ifMIB 1 }
+
+interfaces   OBJECT IDENTIFIER ::= { mib-2 2 }
+
+--
+-- Textual Conventions
+--
+
+-- OwnerString has the same semantics as used in RFC 1271
+
+OwnerString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       deprecated
+    DESCRIPTION
+            "This data type is used to model an administratively
+            assigned name of the owner of a resource.  This information
+            is taken from the NVT ASCII character set.  It is suggested
+            that this name contain one or more of the following: ASCII
+            form of the manager station's transport address, management
+            station name (e.g., domain name), network management
+            personnel's name, location, or phone number.  In some cases
+            the agent itself will be the owner of an entry.  In these
+            cases, this string shall be set to a string starting with
+            'agent'."
+    SYNTAX       OCTET STRING (SIZE(0..255))
+
+-- InterfaceIndex contains the semantics of ifIndex and should be used
+-- for any objects defined in other MIB modules that need these semantics.
+
+InterfaceIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface or
+            interface sub-layer in the managed system.  It is
+            recommended that values are assigned contiguously starting
+            from 1.  The value for each interface sub-layer must remain
+            constant at least from one re-initialization of the entity's
+            network management system to the next re-initialization."
+    SYNTAX       Integer32 (1..2147483647)
+
+InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "This textual convention is an extension of the
+            InterfaceIndex convention.  The latter defines a greater
+            than zero value used to identify an interface or interface
+            sub-layer in the managed system.  This extension permits the
+            additional value of zero.  the value zero is object-specific
+            and must therefore be defined as part of the description of
+            any object which uses this syntax.  Examples of the usage of
+            zero might include situations where interface was unknown,
+            or when none or all interfaces need to be referenced."
+    SYNTAX       Integer32 (0..2147483647)
+
+ifNumber  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of network interfaces (regardless of their
+            current state) present on this system."
+    ::= { interfaces 1 }
+
+ifTableLastChange  OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the last creation or
+            deletion of an entry in the ifTable.  If the number of
+            entries has been unchanged since the last re-initialization
+            of the local network management subsystem, then this object
+            contains a zero value."
+    ::= { ifMIBObjects 5 }
+
+-- the Interfaces table
+
+-- The Interfaces table contains information on the entity's
+
+-- interfaces.  Each sub-layer below the internetwork-layer
+-- of a network interface is considered to be an interface.
+
+ifTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of interface entries.  The number of entries is
+            given by the value of ifNumber."
+    ::= { interfaces 2 }
+
+ifEntry OBJECT-TYPE
+    SYNTAX      IfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing management information applicable to a
+            particular interface."
+    INDEX   { ifIndex }
+    ::= { ifTable 1 }
+
+IfEntry ::=
+    SEQUENCE {
+        ifIndex                 InterfaceIndex,
+        ifDescr                 DisplayString,
+        ifType                  IANAifType,
+        ifMtu                   Integer32,
+        ifSpeed                 Gauge32,
+        ifPhysAddress           PhysAddress,
+        ifAdminStatus           INTEGER,
+        ifOperStatus            INTEGER,
+        ifLastChange            TimeTicks,
+        ifInOctets              Counter32,
+        ifInUcastPkts           Counter32,
+        ifInNUcastPkts          Counter32,  -- deprecated
+        ifInDiscards            Counter32,
+        ifInErrors              Counter32,
+        ifInUnknownProtos       Counter32,
+        ifOutOctets             Counter32,
+        ifOutUcastPkts          Counter32,
+        ifOutNUcastPkts         Counter32,  -- deprecated
+        ifOutDiscards           Counter32,
+        ifOutErrors             Counter32,
+        ifOutQLen               Gauge32,    -- deprecated
+        ifSpecific              OBJECT IDENTIFIER -- deprecated
+    }
+
+ifIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface.  It
+            is recommended that values are assigned contiguously
+            starting from 1.  The value for each interface sub-layer
+            must remain constant at least from one re-initialization of
+            the entity's network management system to the next re-
+            initialization."
+    ::= { ifEntry 1 }
+
+ifDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual string containing information about the
+            interface.  This string should include the name of the
+            manufacturer, the product name and the version of the
+            interface hardware/software."
+    ::= { ifEntry 2 }
+
+ifType OBJECT-TYPE
+    SYNTAX      IANAifType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The type of interface.  Additional values for ifType are
+            assigned by the Internet Assigned Numbers Authority (IANA),
+            through updating the syntax of the IANAifType textual
+            convention."
+    ::= { ifEntry 3 }
+
+ifMtu OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The size of the largest packet which can be sent/received
+            on the interface, specified in octets.  For interfaces that
+            are used for transmitting network datagrams, this is the
+            size of the largest network datagram that can be sent on the
+            interface."
+    ::= { ifEntry 4 }
+
+ifSpeed OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth in bits
+            per second.  For interfaces which do not vary in bandwidth
+            or for those where no accurate estimation can be made, this
+            object should contain the nominal bandwidth.  If the
+            bandwidth of the interface is greater than the maximum value
+            reportable by this object then this object should report its
+            maximum value (4,294,967,295) and ifHighSpeed must be used
+            to report the interace's speed.  For a sub-layer which has
+            no concept of bandwidth, this object should be zero."
+    ::= { ifEntry 5 }
+
+ifPhysAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The interface's address at its protocol sub-layer.  For
+            example, for an 802.x interface, this object normally
+            contains a MAC address.  The interface's media-specific MIB
+            must define the bit and byte ordering and the format of the
+            value of this object.  For interfaces which do not have such
+            an address (e.g., a serial line), this object should contain
+            an octet string of zero length."
+    ::= { ifEntry 6 }
+
+ifAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),       -- ready to pass packets
+                down(2),
+                testing(3)   -- in some test mode
+            }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The desired state of the interface.  The testing(3) state
+            indicates that no operational packets can be passed.  When a
+            managed system initializes, all interfaces start with
+            ifAdminStatus in the down(2) state.  As a result of either
+            explicit management action or per configuration information
+            retained by the managed system, ifAdminStatus is then
+            changed to either the up(1) or testing(3) states (or remains
+            in the down(2) state)."
+    ::= { ifEntry 7 }
+
+ifOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),        -- ready to pass packets
+                down(2),
+                testing(3),   -- in some test mode
+                unknown(4),   -- status can not be determined
+                              -- for some reason.
+                dormant(5),
+                notPresent(6),    -- some component is missing
+                lowerLayerDown(7) -- down due to state of
+                                  -- lower-layer interface(s)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current operational state of the interface.  The
+            testing(3) state indicates that no operational packets can
+            be passed.  If ifAdminStatus is down(2) then ifOperStatus
+            should be down(2).  If ifAdminStatus is changed to up(1)
+            then ifOperStatus should change to up(1) if the interface is
+            ready to transmit and receive network traffic; it should
+            change to dormant(5) if the interface is waiting for
+            external actions (such as a serial line waiting for an
+            incoming connection); it should remain in the down(2) state
+            if and only if there is a fault that prevents it from going
+            to the up(1) state; it should remain in the notPresent(6)
+            state if the interface has missing (typically, hardware)
+            components."
+    ::= { ifEntry 8 }
+
+ifLastChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time the interface entered
+            its current operational state.  If the current state was
+            entered prior to the last re-initialization of the local
+            network management subsystem, then this object contains a
+            zero value."
+    ::= { ifEntry 9 }
+
+ifInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets received on the interface,
+            including framing characters.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 10 }
+
+ifInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were not addressed to a multicast
+            or broadcast address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 11 }
+
+ifInNUcastPkts OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast or
+            broadcast address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime.
+
+            This object is deprecated in favour of ifInMulticastPkts and
+            ifInBroadcastPkts."
+    ::= { ifEntry 12 }
+
+ifInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of inbound packets which were chosen to be
+            discarded even though no errors had been detected to prevent
+
+            their being deliverable to a higher-layer protocol.  One
+            possible reason for discarding such a packet could be to
+            free up buffer space.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 13 }
+
+ifInErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of inbound
+            packets that contained errors preventing them from being
+            deliverable to a higher-layer protocol.  For character-
+            oriented or fixed-length interfaces, the number of inbound
+            transmission units that contained errors preventing them
+            from being deliverable to a higher-layer protocol.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 14 }
+
+ifInUnknownProtos OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of packets
+            received via the interface which were discarded because of
+            an unknown or unsupported protocol.  For character-oriented
+            or fixed-length interfaces that support protocol
+            multiplexing the number of transmission units received via
+            the interface which were discarded because of an unknown or
+            unsupported protocol.  For any interface that does not
+            support protocol multiplexing, this counter will always be
+            0.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 15 }
+
+ifOutOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 16 }
+
+ifOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were not addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 17 }
+
+ifOutNUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime.
+
+            This object is deprecated in favour of ifOutMulticastPkts
+            and ifOutBroadcastPkts."
+    ::= { ifEntry 18 }
+
+ifOutDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of outbound packets which were chosen to be
+            discarded even though no errors had been detected to prevent
+            their being transmitted.  One possible reason for discarding
+            such a packet could be to free up buffer space.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 19 }
+
+ifOutErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of outbound
+            packets that could not be transmitted because of errors.
+            For character-oriented or fixed-length interfaces, the
+            number of outbound transmission units that could not be
+            transmitted because of errors.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 20 }
+
+ifOutQLen OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The length of the output packet queue (in packets)."
+    ::= { ifEntry 21 }
+
+ifSpecific OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "A reference to MIB definitions specific to the particular
+            media being used to realize the interface.  It is
+
+            recommended that this value point to an instance of a MIB
+            object in the media-specific MIB, i.e., that this object
+            have the semantics associated with the InstancePointer
+            textual convention defined in RFC 2579.  In fact, it is
+            recommended that the media-specific MIB specify what value
+            ifSpecific should/can take for values of ifType.  If no MIB
+            definitions specific to the particular media are available,
+            the value should be set to the OBJECT IDENTIFIER { 0 0 }."
+    ::= { ifEntry 22 }
+
+--
+--   Extension to the interface table
+--
+-- This table replaces the ifExtnsTable table.
+--
+
+ifXTable        OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfXEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of interface entries.  The number of entries is
+            given by the value of ifNumber.  This table contains
+            additional objects for the interface table."
+    ::= { ifMIBObjects 1 }
+
+ifXEntry        OBJECT-TYPE
+    SYNTAX      IfXEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing additional management information
+            applicable to a particular interface."
+    AUGMENTS    { ifEntry }
+    ::= { ifXTable 1 }
+
+IfXEntry ::=
+    SEQUENCE {
+        ifName                  DisplayString,
+        ifInMulticastPkts       Counter32,
+        ifInBroadcastPkts       Counter32,
+        ifOutMulticastPkts      Counter32,
+        ifOutBroadcastPkts      Counter32,
+        ifHCInOctets            Counter64,
+        ifHCInUcastPkts         Counter64,
+        ifHCInMulticastPkts     Counter64,
+        ifHCInBroadcastPkts     Counter64,
+        ifHCOutOctets           Counter64,
+        ifHCOutUcastPkts        Counter64,
+        ifHCOutMulticastPkts    Counter64,
+        ifHCOutBroadcastPkts    Counter64,
+        ifLinkUpDownTrapEnable  INTEGER,
+        ifHighSpeed             Gauge32,
+        ifPromiscuousMode       TruthValue,
+        ifConnectorPresent      TruthValue,
+        ifAlias                 DisplayString,
+        ifCounterDiscontinuityTime TimeStamp
+    }
+
+ifName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The textual name of the interface.  The value of this
+            object should be the name of the interface as assigned by
+            the local device and should be suitable for use in commands
+            entered at the device's `console'.  This might be a text
+            name, such as `le0' or a simple port number, such as `1',
+            depending on the interface naming syntax of the device.  If
+            several entries in the ifTable together represent a single
+            interface as named by the device, then each will have the
+            same value of ifName.  Note that for an agent which responds
+            to SNMP queries concerning an interface on some other
+            (proxied) device, then the value of ifName for such an
+            interface is the proxied device's local name for it.
+
+            If there is no local name, or this object is otherwise not
+            applicable, then this object contains a zero-length string."
+    ::= { ifXEntry 1 }
+
+ifInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast
+            address at this sub-layer.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 2 }
+
+ifInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a broadcast
+            address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 3 }
+
+ifOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast address at this sub-layer, including those that
+            were discarded or not sent.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 4 }
+
+ifOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            broadcast address at this sub-layer, including those that
+            were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 5 }
+
+--
+-- High Capacity Counter objects.  These objects are all
+-- 64 bit versions of the "basic" ifTable counters.  These
+-- objects all have the same basic semantics as their 32-bit
+-- counterparts, however, their syntax has been extended
+-- to 64 bits.
+--
+
+ifHCInOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets received on the interface,
+            including framing characters.  This object is a 64-bit
+            version of ifInOctets.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 6 }
+
+ifHCInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were not addressed to a multicast
+            or broadcast address at this sub-layer.  This object is a
+            64-bit version of ifInUcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 7 }
+
+ifHCInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast
+            address at this sub-layer.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.  This object
+            is a 64-bit version of ifInMulticastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 8 }
+
+ifHCInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a broadcast
+            address at this sub-layer.  This object is a 64-bit version
+            of ifInBroadcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 9 }
+
+ifHCOutOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters.  This object is a
+            64-bit version of ifOutOctets.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 10 }
+
+ifHCOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were not addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.  This object is a
+            64-bit version of ifOutUcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 11 }
+
+ifHCOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast address at this sub-layer, including those that
+            were discarded or not sent.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.  This object
+            is a 64-bit version of ifOutMulticastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 12 }
+
+ifHCOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            broadcast address at this sub-layer, including those that
+            were discarded or not sent.  This object is a 64-bit version
+            of ifOutBroadcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 13 }
+
+ifLinkUpDownTrapEnable  OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Indicates whether linkUp/linkDown traps should be generated
+            for this interface.
+
+            By default, this object should have the value enabled(1) for
+            interfaces which do not operate on 'top' of any other
+            interface (as defined in the ifStackTable), and disabled(2)
+            otherwise."
+    ::= { ifXEntry 14 }
+
+ifHighSpeed OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth in units
+            of 1,000,000 bits per second.  If this object reports a
+            value of `n' then the speed of the interface is somewhere in
+            the range of `n-500,000' to `n+499,999'.  For interfaces
+            which do not vary in bandwidth or for those where no
+            accurate estimation can be made, this object should contain
+            the nominal bandwidth.  For a sub-layer which has no concept
+            of bandwidth, this object should be zero."
+    ::= { ifXEntry 15 }
+
+ifPromiscuousMode  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object has a value of false(2) if this interface only
+            accepts packets/frames that are addressed to this station.
+            This object has a value of true(1) when the station accepts
+            all packets/frames transmitted on the media.  The value
+            true(1) is only legal on certain types of media.  If legal,
+            setting this object to a value of true(1) may require the
+            interface to be reset before becoming effective.
+
+            The value of ifPromiscuousMode does not affect the reception
+            of broadcast and multicast packets/frames by the interface."
+    ::= { ifXEntry 16 }
+
+ifConnectorPresent   OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object has the value 'true(1)' if the interface
+            sublayer has a physical connector and the value 'false(2)'
+            otherwise."
+    ::= { ifXEntry 17 }
+
+ifAlias   OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..64))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object is an 'alias' name for the interface as
+            specified by a network manager, and provides a non-volatile
+            'handle' for the interface.
+
+            On the first instantiation of an interface, the value of
+            ifAlias associated with that interface is the zero-length
+            string.  As and when a value is written into an instance of
+            ifAlias through a network management set operation, then the
+            agent must retain the supplied value in the ifAlias instance
+            associated with the same interface for as long as that
+            interface remains instantiated, including across all re-
+            initializations/reboots of the network management system,
+            including those which result in a change of the interface's
+            ifIndex value.
+
+            An example of the value which a network manager might store
+            in this object for a WAN interface is the (Telco's) circuit
+            number/identifier of the interface.
+
+            Some agents may support write-access only for interfaces
+            having particular values of ifType.  An agent which supports
+            write access to this object is required to keep the value in
+            non-volatile storage, but it may limit the length of new
+            values depending on how much storage is already occupied by
+            the current values for other interfaces."
+    ::= { ifXEntry 18 }
+
+ifCounterDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime on the most recent occasion at which
+            any one or more of this interface's counters suffered a
+            discontinuity.  The relevant counters are the specific
+            instances associated with this interface of any Counter32 or
+
+            Counter64 object contained in the ifTable or ifXTable.  If
+            no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ifXEntry 19 }
+
+--           The Interface Stack Group
+--
+-- Implementation of this group is optional, but strongly recommended
+-- for all systems
+--
+
+ifStackTable  OBJECT-TYPE
+     SYNTAX        SEQUENCE OF IfStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The table containing information on the relationships
+            between the multiple sub-layers of network interfaces.  In
+            particular, it contains information on which sub-layers run
+            'on top of' which other sub-layers, where each sub-layer
+            corresponds to a conceptual row in the ifTable.  For
+            example, when the sub-layer with ifIndex value x runs over
+            the sub-layer with ifIndex value y, then this table
+            contains:
+
+              ifStackStatus.x.y=active
+
+            For each ifIndex value, I, which identifies an active
+            interface, there are always at least two instantiated rows
+            in this table associated with I.  For one of these rows, I
+            is the value of ifStackHigherLayer; for the other, I is the
+            value of ifStackLowerLayer.  (If I is not involved in
+            multiplexing, then these are the only two rows associated
+            with I.)
+
+            For example, two rows exist even for an interface which has
+            no others stacked on top or below it:
+
+              ifStackStatus.0.x=active
+              ifStackStatus.x.0=active "
+     ::= { ifMIBObjects 2 }
+
+ifStackEntry  OBJECT-TYPE
+     SYNTAX        IfStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "Information on a particular relationship between two sub-
+            layers, specifying that one sub-layer runs on 'top' of the
+            other sub-layer.  Each sub-layer corresponds to a conceptual
+            row in the ifTable."
+     INDEX { ifStackHigherLayer, ifStackLowerLayer }
+     ::= { ifStackTable 1 }
+
+IfStackEntry ::=
+    SEQUENCE {
+        ifStackHigherLayer  InterfaceIndexOrZero,
+        ifStackLowerLayer   InterfaceIndexOrZero,
+        ifStackStatus       RowStatus
+     }
+
+ifStackHigherLayer  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The value of ifIndex corresponding to the higher sub-layer
+            of the relationship, i.e., the sub-layer which runs on 'top'
+            of the sub-layer identified by the corresponding instance of
+            ifStackLowerLayer.  If there is no higher sub-layer (below
+            the internetwork layer), then this object has the value 0."
+     ::= { ifStackEntry 1 }
+
+ifStackLowerLayer  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The value of ifIndex corresponding to the lower sub-layer
+            of the relationship, i.e., the sub-layer which runs 'below'
+            the sub-layer identified by the corresponding instance of
+            ifStackHigherLayer.  If there is no lower sub-layer, then
+            this object has the value 0."
+     ::= { ifStackEntry 2 }
+
+ifStackStatus  OBJECT-TYPE
+    SYNTAX         RowStatus
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+            "The status of the relationship between two sub-layers.
+
+            Changing the value of this object from 'active' to
+            'notInService' or 'destroy' will likely have consequences up
+            and down the interface stack.  Thus, write access to this
+            object is likely to be inappropriate for some types of
+            interfaces, and many implementations will choose not to
+            support write-access for any type of interface."
+    ::= { ifStackEntry 3 }
+
+ifStackLastChange OBJECT-TYPE
+    SYNTAX         TimeTicks
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the last change of
+            the (whole) interface stack.  A change of the interface
+            stack is defined to be any creation, deletion, or change in
+            value of any instance of ifStackStatus.  If the interface
+            stack has been unchanged since the last re-initialization of
+            the local network management subsystem, then this object
+            contains a zero value."
+    ::= { ifMIBObjects 6 }
+
+--   Generic Receive Address Table
+--
+-- This group of objects is mandatory for all types of
+-- interfaces which can receive packets/frames addressed to
+-- more than one address.
+--
+-- This table replaces the ifExtnsRcvAddr table.  The main
+-- difference is that this table makes use of the RowStatus
+-- textual convention, while ifExtnsRcvAddr did not.
+
+ifRcvAddressTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfRcvAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains an entry for each address (broadcast,
+            multicast, or uni-cast) for which the system will receive
+            packets/frames on a particular interface, except as follows:
+
+            - for an interface operating in promiscuous mode, entries
+            are only required for those addresses for which the system
+            would receive frames were it not operating in promiscuous
+            mode.
+
+            - for 802.5 functional addresses, only one entry is
+            required, for the address which has the functional address
+            bit ANDed with the bit mask of all functional addresses for
+            which the interface will accept frames.
+
+            A system is normally able to use any unicast address which
+            corresponds to an entry in this table as a source address."
+    ::= { ifMIBObjects 4 }
+
+ifRcvAddressEntry  OBJECT-TYPE
+    SYNTAX      IfRcvAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of objects identifying an address for which the
+            system will accept packets/frames on the particular
+            interface identified by the index value ifIndex."
+    INDEX  { ifIndex, ifRcvAddressAddress }
+    ::= { ifRcvAddressTable 1 }
+
+IfRcvAddressEntry ::=
+    SEQUENCE {
+        ifRcvAddressAddress   PhysAddress,
+        ifRcvAddressStatus    RowStatus,
+        ifRcvAddressType      INTEGER
+    }
+
+ifRcvAddressAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An address for which the system will accept packets/frames
+            on this entry's interface."
+    ::= { ifRcvAddressEntry 1 }
+
+ifRcvAddressStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object is used to create and delete rows in the
+            ifRcvAddressTable."
+    ::= { ifRcvAddressEntry 2 }
+
+ifRcvAddressType OBJECT-TYPE
+    SYNTAX      INTEGER {
+
+                    other(1),
+                    volatile(2),
+                    nonVolatile(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object has the value nonVolatile(3) for those entries
+            in the table which are valid and will not be deleted by the
+            next restart of the managed system.  Entries having the
+            value volatile(2) are valid and exist, but have not been
+            saved, so that will not exist after the next restart of the
+            managed system.  Entries having the value other(1) are valid
+            and exist but are not classified as to whether they will
+            continue to exist after the next restart."
+    DEFVAL  { volatile }
+    ::= { ifRcvAddressEntry 3 }
+
+-- definition of interface-related traps.
+
+linkDown NOTIFICATION-TYPE
+    OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
+    STATUS  current
+    DESCRIPTION
+            "A linkDown trap signifies that the SNMP entity, acting in
+            an agent role, has detected that the ifOperStatus object for
+            one of its communication links is about to enter the down
+            state from some other state (but not from the notPresent
+            state).  This other state is indicated by the included value
+            of ifOperStatus."
+    ::= { snmpTraps 3 }
+
+linkUp NOTIFICATION-TYPE
+    OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
+    STATUS  current
+    DESCRIPTION
+            "A linkUp trap signifies that the SNMP entity, acting in an
+            agent role, has detected that the ifOperStatus object for
+            one of its communication links left the down state and
+            transitioned into some other state (but not into the
+            notPresent state).  This other state is indicated by the
+            included value of ifOperStatus."
+    ::= { snmpTraps 4 }
+
+-- conformance information
+
+ifConformance OBJECT IDENTIFIER ::= { ifMIB 2 }
+
+ifGroups      OBJECT IDENTIFIER ::= { ifConformance 1 }
+ifCompliances OBJECT IDENTIFIER ::= { ifConformance 2 }
+
+-- compliance statements
+
+ifCompliance3 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which have
+            network interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralInformationGroup,
+                           linkUpDownNotificationsGroup }
+
+-- The groups:
+--        ifFixedLengthGroup
+--        ifHCFixedLengthGroup
+--        ifPacketGroup
+--        ifHCPacketGroup
+--        ifVHCPacketGroup
+-- are mutually exclusive; at most one of these groups is implemented
+-- for a particular interface.  When any of these groups is implemented
+-- for a particular interface, then ifCounterDiscontinuityGroup must
+-- also be implemented for that interface.
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units, and for which the value of the
+            corresponding instance of ifSpeed is less than or equal to
+            20,000,000 bits/second."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are packet-oriented, and for which the value of the
+            corresponding instance of ifSpeed is less than or equal to
+            20,000,000 bits/second."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second but less than or equal to 650,000,000
+            bits/second."
+
+        GROUP       ifVHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifCounterDiscontinuityGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces that
+            are required to maintain counters (i.e., those for which one
+            of the ifFixedLengthGroup, ifHCFixedLengthGroup,
+            ifPacketGroup, ifHCPacketGroup, or ifVHCPacketGroup is
+            mandatory)."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+
+        OBJECT       ifAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { ifCompliances 3 }
+
+-- units of conformance
+
+ifGeneralInformationGroup    OBJECT-GROUP
+    OBJECTS { ifIndex, ifDescr, ifType, ifSpeed, ifPhysAddress,
+              ifAdminStatus, ifOperStatus, ifLastChange,
+              ifLinkUpDownTrapEnable, ifConnectorPresent,
+              ifHighSpeed, ifName, ifNumber, ifAlias,
+              ifTableLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information applicable to
+            all network interfaces."
+    ::= { ifGroups 10 }
+
+-- the following five groups are mutually exclusive; at most
+-- one of these groups is implemented for any interface
+
+ifFixedLengthGroup    OBJECT-GROUP
+    OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            non-high speed (non-high speed interfaces transmit and
+            receive at speeds less than or equal to 20,000,000
+            bits/second) character-oriented or fixed-length-transmission
+            network interfaces."
+    ::= { ifGroups 2 }
+
+ifHCFixedLengthGroup    OBJECT-GROUP
+    OBJECTS { ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second) character-
+            oriented or fixed-length-transmission network interfaces."
+    ::= { ifGroups 3 }
+
+ifPacketGroup    OBJECT-GROUP
+    OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            non-high speed (non-high speed interfaces transmit and
+            receive at speeds less than or equal to 20,000,000
+            bits/second) packet-oriented network interfaces."
+    ::= { ifGroups 4 }
+
+ifHCPacketGroup    OBJECT-GROUP
+    OBJECTS { ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second but less
+            than or equal to 650,000,000 bits/second) packet-oriented
+            network interfaces."
+    ::= { ifGroups 5 }
+
+ifVHCPacketGroup    OBJECT-GROUP
+    OBJECTS { ifHCInUcastPkts, ifHCInMulticastPkts,
+              ifHCInBroadcastPkts, ifHCOutUcastPkts,
+              ifHCOutMulticastPkts, ifHCOutBroadcastPkts,
+              ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            higher speed (greater than 650,000,000 bits/second) packet-
+            oriented network interfaces."
+    ::= { ifGroups 6 }
+
+ifRcvAddressGroup    OBJECT-GROUP
+    OBJECTS { ifRcvAddressStatus, ifRcvAddressType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            multiple addresses which an interface receives."
+    ::= { ifGroups 7 }
+
+ifStackGroup2    OBJECT-GROUP
+    OBJECTS { ifStackStatus, ifStackLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            layering of MIB-II interfaces."
+    ::= { ifGroups 11 }
+
+ifCounterDiscontinuityGroup  OBJECT-GROUP
+    OBJECTS { ifCounterDiscontinuityTime }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            interface counter discontinuities."
+    ::= { ifGroups 13 }
+
+linkUpDownNotificationsGroup  NOTIFICATION-GROUP
+    NOTIFICATIONS { linkUp, linkDown }
+    STATUS  current
+    DESCRIPTION
+            "The notifications which indicate specific changes in the
+            value of ifOperStatus."
+    ::= { ifGroups 14 }
+
+-- Deprecated Definitions - Objects
+
+--
+--    The Interface Test Table
+--
+-- This group of objects is optional.  However, a media-specific
+
+-- MIB may make implementation of this group mandatory.
+--
+-- This table replaces the ifExtnsTestTable
+--
+
+ifTestTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      deprecated
+    DESCRIPTION
+            "This table contains one entry per interface.  It defines
+            objects which allow a network manager to instruct an agent
+            to test an interface for various faults.  Tests for an
+            interface are defined in the media-specific MIB for that
+            interface.  After invoking a test, the object ifTestResult
+            can be read to determine the outcome.  If an agent can not
+            perform the test, ifTestResult is set to so indicate.  The
+            object ifTestCode can be used to provide further test-
+            specific or interface-specific (or even enterprise-specific)
+            information concerning the outcome of the test.  Only one
+            test can be in progress on each interface at any one time.
+            If one test is in progress when another test is invoked, the
+            second test is rejected.  Some agents may reject a test when
+            a prior test is active on another interface.
+
+            Before starting a test, a manager-station must first obtain
+            'ownership' of the entry in the ifTestTable for the
+            interface to be tested.  This is accomplished with the
+            ifTestId and ifTestStatus objects as follows:
+
+          try_again:
+              get (ifTestId, ifTestStatus)
+              while (ifTestStatus != notInUse)
+                  /*
+                   * Loop while a test is running or some other
+                   * manager is configuring a test.
+                   */
+                  short delay
+                  get (ifTestId, ifTestStatus)
+              }
+
+              /*
+               * Is not being used right now -- let's compete
+               * to see who gets it.
+               */
+              lock_value = ifTestId
+
+              if ( set(ifTestId = lock_value, ifTestStatus = inUse,
+                       ifTestOwner = 'my-IP-address') == FAILURE)
+                  /*
+                   * Another manager got the ifTestEntry -- go
+                   * try again
+                   */
+                  goto try_again;
+
+              /*
+               * I have the lock
+               */
+              set up any test parameters.
+
+              /*
+               * This starts the test
+               */
+              set(ifTestType = test_to_run);
+
+              wait for test completion by polling ifTestResult
+
+              when test completes, agent sets ifTestResult
+                   agent also sets ifTestStatus = 'notInUse'
+
+              retrieve any additional test results, and ifTestId
+
+              if (ifTestId == lock_value+1) results are valid
+
+            A manager station first retrieves the value of the
+            appropriate ifTestId and ifTestStatus objects, periodically
+            repeating the retrieval if necessary, until the value of
+            ifTestStatus is 'notInUse'.  The manager station then tries
+            to set the same ifTestId object to the value it just
+            retrieved, the same ifTestStatus object to 'inUse', and the
+            corresponding ifTestOwner object to a value indicating
+            itself.  If the set operation succeeds then the manager has
+            obtained ownership of the ifTestEntry, and the value of the
+            ifTestId object is incremented by the agent (per the
+            semantics of TestAndIncr).  Failure of the set operation
+            indicates that some other manager has obtained ownership of
+            the ifTestEntry.
+
+            Once ownership is obtained, any test parameters can be
+            setup, and then the test is initiated by setting ifTestType.
+            On completion of the test, the agent sets ifTestStatus to
+            'notInUse'.  Once this occurs, the manager can retrieve the
+            results.  In the (rare) event that the invocation of tests
+            by two network managers were to overlap, then there would be
+            a possibility that the first test's results might be
+            overwritten by the second test's results prior to the first
+
+            results being read.  This unlikely circumstance can be
+            detected by a network manager retrieving ifTestId at the
+            same time as retrieving the test results, and ensuring that
+            the results are for the desired request.
+
+            If ifTestType is not set within an abnormally long period of
+            time after ownership is obtained, the agent should time-out
+            the manager, and reset the value of the ifTestStatus object
+            back to 'notInUse'.  It is suggested that this time-out
+            period be 5 minutes.
+
+            In general, a management station must not retransmit a
+            request to invoke a test for which it does not receive a
+            response; instead, it properly inspects an agent's MIB to
+            determine if the invocation was successful.  Only if the
+            invocation was unsuccessful, is the invocation request
+            retransmitted.
+
+            Some tests may require the interface to be taken off-line in
+            order to execute them, or may even require the agent to
+            reboot after completion of the test.  In these
+            circumstances, communication with the management station
+            invoking the test may be lost until after completion of the
+            test.  An agent is not required to support such tests.
+            However, if such tests are supported, then the agent should
+            make every effort to transmit a response to the request
+            which invoked the test prior to losing communication.  When
+            the agent is restored to normal service, the results of the
+            test are properly made available in the appropriate objects.
+            Note that this requires that the ifIndex value assigned to
+            an interface must be unchanged even if the test causes a
+            reboot.  An agent must reject any test for which it cannot,
+            perhaps due to resource constraints, make available at least
+            the minimum amount of information after that test
+            completes."
+    ::= { ifMIBObjects 3 }
+
+ifTestEntry OBJECT-TYPE
+    SYNTAX       IfTestEntry
+    MAX-ACCESS   not-accessible
+    STATUS       deprecated
+    DESCRIPTION
+            "An entry containing objects for invoking tests on an
+            interface."
+    AUGMENTS  { ifEntry }
+    ::= { ifTestTable 1 }
+
+IfTestEntry ::=
+
+    SEQUENCE {
+        ifTestId           TestAndIncr,
+        ifTestStatus       INTEGER,
+        ifTestType         AutonomousType,
+        ifTestResult       INTEGER,
+        ifTestCode         OBJECT IDENTIFIER,
+        ifTestOwner        OwnerString
+    }
+
+ifTestId         OBJECT-TYPE
+    SYNTAX       TestAndIncr
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "This object identifies the current invocation of the
+            interface's test."
+    ::= { ifTestEntry 1 }
+
+ifTestStatus     OBJECT-TYPE
+    SYNTAX       INTEGER { notInUse(1), inUse(2) }
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "This object indicates whether or not some manager currently
+            has the necessary 'ownership' required to invoke a test on
+            this interface.  A write to this object is only successful
+            when it changes its value from 'notInUse(1)' to 'inUse(2)'.
+            After completion of a test, the agent resets the value back
+            to 'notInUse(1)'."
+    ::= { ifTestEntry 2 }
+
+ifTestType       OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "A control variable used to start and stop operator-
+            initiated interface tests.  Most OBJECT IDENTIFIER values
+            assigned to tests are defined elsewhere, in association with
+            specific types of interface.  However, this document assigns
+            a value for a full-duplex loopback test, and defines the
+            special meanings of the subject identifier:
+
+                noTest  OBJECT IDENTIFIER ::= { 0 0 }
+
+            When the value noTest is written to this object, no action
+            is taken unless a test is in progress, in which case the
+            test is aborted.  Writing any other value to this object is
+
+            only valid when no test is currently in progress, in which
+            case the indicated test is initiated.
+
+            When read, this object always returns the most recent value
+            that ifTestType was set to.  If it has not been set since
+            the last initialization of the network management subsystem
+            on the agent, a value of noTest is returned."
+    ::= { ifTestEntry 3 }
+
+ifTestResult  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     none(1),          -- no test yet requested
+                     success(2),
+                     inProgress(3),
+                     notSupported(4),
+                     unAbleToRun(5),   -- due to state of system
+                     aborted(6),
+                     failed(7)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       deprecated
+    DESCRIPTION
+            "This object contains the result of the most recently
+            requested test, or the value none(1) if no tests have been
+            requested since the last reset.  Note that this facility
+            provides no provision for saving the results of one test
+            when starting another, as could be required if used by
+            multiple managers concurrently."
+    ::= { ifTestEntry 4 }
+
+ifTestCode  OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   read-only
+    STATUS       deprecated
+    DESCRIPTION
+            "This object contains a code which contains more specific
+            information on the test result, for example an error-code
+            after a failed test.  Error codes and other values this
+            object may take are specific to the type of interface and/or
+            test.  The value may have the semantics of either the
+            AutonomousType or InstancePointer textual conventions as
+            defined in RFC 2579.  The identifier:
+
+                testCodeUnknown  OBJECT IDENTIFIER ::= { 0 0 }
+
+            is defined for use if no additional result code is
+            available."
+    ::= { ifTestEntry 5 }
+
+ifTestOwner      OBJECT-TYPE
+    SYNTAX       OwnerString
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "The entity which currently has the 'ownership' required to
+            invoke a test on this interface."
+    ::= { ifTestEntry 6 }
+
+-- Deprecated Definitions - Groups
+
+ifGeneralGroup    OBJECT-GROUP
+    OBJECTS { ifDescr, ifType, ifSpeed, ifPhysAddress,
+              ifAdminStatus, ifOperStatus, ifLastChange,
+              ifLinkUpDownTrapEnable, ifConnectorPresent,
+              ifHighSpeed, ifName }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects deprecated in favour of
+            ifGeneralInformationGroup."
+    ::= { ifGroups 1 }
+
+ifTestGroup    OBJECT-GROUP
+    OBJECTS { ifTestId, ifTestStatus, ifTestType,
+              ifTestResult, ifTestCode, ifTestOwner }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing the ability to invoke
+            tests on an interface."
+    ::= { ifGroups 8 }
+
+ifStackGroup    OBJECT-GROUP
+    OBJECTS { ifStackStatus }
+    STATUS  deprecated
+    DESCRIPTION
+            "The previous collection of objects providing information on
+            the layering of MIB-II interfaces."
+    ::= { ifGroups 9 }
+
+ifOldObjectsGroup    OBJECT-GROUP
+    OBJECTS { ifInNUcastPkts, ifOutNUcastPkts,
+              ifOutQLen, ifSpecific }
+    STATUS  deprecated
+    DESCRIPTION
+            "The collection of objects deprecated from the original MIB-
+            II interfaces group."
+    ::= { ifGroups 12 }
+
+-- Deprecated Definitions - Compliance
+
+ifCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "A compliance statement defined in a previous version of
+            this MIB module, for SNMP entities which have network
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralGroup, ifStackGroup }
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are character-oriented or transmit data in fixed-
+            length transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are packet-oriented."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifTestGroup
+        DESCRIPTION
+            "This group is optional.  Media-specific MIBs which require
+            interface tests are strongly encouraged to use this group
+            for invoking tests and reporting results.  A medium specific
+            MIB which has mandatory tests may make implementation of
+
+            this group mandatory."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifStackStatus
+        SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only one of the six
+            enumerated values for the RowStatus textual convention need
+            be supported, specifically: active(1)."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+    ::= { ifCompliances 1 }
+
+ifCompliance2 MODULE-COMPLIANCE
+    STATUS      deprecated
+    DESCRIPTION
+            "A compliance statement defined in a previous version of
+            this MIB module, for SNMP entities which have network
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralInformationGroup, ifStackGroup2,
+                           ifCounterDiscontinuityGroup }
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are character-oriented or transmit data in fixed-
+            length transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are packet-oriented."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifStackStatus
+        SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only one of the six
+            enumerated values for the RowStatus textual convention need
+            be supported, specifically: active(1)."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+
+        OBJECT       ifAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { ifCompliances 2 }
+
+END
diff --git a/snmp_builder/mibs/IFCP-MGMT-MIB.mib b/snmp_builder/mibs/IFCP-MGMT-MIB.mib
new file mode 100644
index 0000000..723956a
--- /dev/null
+++ b/snmp_builder/mibs/IFCP-MGMT-MIB.mib
@@ -0,0 +1,1015 @@
+IFCP-MGMT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Gauge32,
+    Integer32,
+    Unsigned32,
+    transmission
+         FROM SNMPv2-SMI
+
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE
+         FROM SNMPv2-CONF
+
+    TEXTUAL-CONVENTION,
+    TimeStamp,
+    TruthValue,
+    StorageType
+         FROM SNMPv2-TC
+
+--  From RFC 2021
+    ZeroBasedCounter32
+         FROM RMON2-MIB
+
+--  From RFC 2856
+    ZeroBasedCounter64
+         FROM HCNUM-TC
+
+--  From RFC 2863
+    InterfaceIndexOrZero
+         FROM IF-MIB
+
+--  From RFC 3411
+    SnmpAdminString
+         FROM SNMP-FRAMEWORK-MIB
+
+--  From RFC 4001
+    InetAddressType,
+    InetAddress,
+    InetPortNumber
+         FROM INET-ADDRESS-MIB
+
+--  From RFC 4044
+    FcNameIdOrZero,
+    FcAddressIdOrZero
+
+         FROM FC-MGMT-MIB
+
+--  From RFC 4133
+    PhysicalIndexOrZero
+         FROM ENTITY-MIB
+      ;
+
+ifcpMgmtMIB   MODULE-IDENTITY
+      LAST-UPDATED "200601170000Z"
+      ORGANIZATION "IETF IPS Working Group"
+      CONTACT-INFO "
+        Attn: Kevin Gibbons
+              McDATA Corporation
+              4555 Great America Pkwy
+              Santa Clara, CA 95054-1208 USA
+              Phone: (408) 567-5765
+              EMail: kevin.gibbons@mcdata.com
+
+              Charles Monia
+              Consultant
+              7553 Morevern Circle
+              San Jose, CA 95135 USA
+              EMail: charles_monia@yahoo.com
+
+              Josh Tseng
+              Riverbed Technology
+              501 2nd Street, Suite 410
+              San Francisco, CA 94107 USA
+              Phone: (650) 274-2109
+              EMail: joshtseng@yahoo.com
+
+              Franco Travostino
+              Nortel
+              600 Technology Park Drive
+              Billerica, MA 01821 USA
+              Phone: (978) 288-7708
+              EMail: travos@nortel.com"
+      DESCRIPTION
+              "This module defines management information specific
+               to internet Fibre Channel Protocol (iFCP) gateway
+               management.
+
+               Copyright (C) The Internet Society 2006.  This
+               version of this MIB module is part of RFC 4369; see
+               the RFC itself for full legal notices."
+          REVISION    "200601170000Z"
+      DESCRIPTION
+               "Initial version of iFCP Management Module.
+                This MIB published as RFC 4369."
+      ::=  { transmission 230 }
+
+--
+--  Textual Conventions
+--
+
+  IfcpIpTOVorZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT   "d"
+    STATUS         current
+    DESCRIPTION    "The maximum propagation delay, in seconds,
+                    for an encapsulated FC frame to traverse the
+                    IP network.  A value of 0 implies fibre
+                    channel frame lifetime limits will not be
+                    enforced."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    SYNTAX         Unsigned32 (0..3600)
+
+  IfcpLTIorZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT   "d"
+    STATUS         current
+    DESCRIPTION    "The value for the Liveness Test Interval
+                    (LTI) being used in an iFCP connection, in
+                    seconds.  A value of 0 implies no Liveness
+                    Test Interval will be used."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    SYNTAX         Unsigned32 (0..65535)
+
+  IfcpSessionStates ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "The value for an iFCP session state."
+    SYNTAX         INTEGER {down(1), openPending(2), open(3)}
+
+  IfcpAddressMode ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "The values for iFCP Address Translation
+                    Mode."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    SYNTAX         INTEGER {addressTransparent(1),
+                            addressTranslation(2)}
+
+--
+-- Internet Fibre Channel Protocol (iFCP)
+--
+
+ifcpGatewayObjects      OBJECT IDENTIFIER ::= {ifcpMgmtMIB 1}
+ifcpGatewayConformance  OBJECT IDENTIFIER ::= {ifcpMgmtMIB 2}
+
+--
+-- Local iFCP Gateway Instance Information ==================
+--
+
+ifcpLclGatewayInfo OBJECT IDENTIFIER ::= {ifcpGatewayObjects 1}
+
+ifcpLclGtwyInstTable OBJECT-TYPE
+    SYNTAX           SEQUENCE OF IfcpLclGtwyInstEntry
+    MAX-ACCESS       not-accessible
+    STATUS           current
+    DESCRIPTION
+"Information about all local iFCP Gateway instances that can
+ be monitored and controlled.  This table contains an entry
+ for each local iFCP Gateway instance that is being managed."
+    ::= {ifcpLclGatewayInfo 1}
+
+ifcpLclGtwyInstEntry OBJECT-TYPE
+    SYNTAX           IfcpLclGtwyInstEntry
+    MAX-ACCESS       not-accessible
+    STATUS           current
+    DESCRIPTION
+"An entry in the local iFCP Gateway Instance table.
+ Parameters and settings for the gateway are found here."
+    INDEX { ifcpLclGtwyInstIndex }
+    ::= {ifcpLclGtwyInstTable 1}
+
+IfcpLclGtwyInstEntry ::= SEQUENCE {
+    ifcpLclGtwyInstIndex             Unsigned32,
+    ifcpLclGtwyInstPhyIndex          PhysicalIndexOrZero,
+    ifcpLclGtwyInstVersionMin        Unsigned32,
+    ifcpLclGtwyInstVersionMax        Unsigned32,
+    ifcpLclGtwyInstAddrTransMode     IfcpAddressMode,
+    ifcpLclGtwyInstFcBrdcstSupport   TruthValue,
+    ifcpLclGtwyInstDefaultIpTOV      IfcpIpTOVorZero,
+    ifcpLclGtwyInstDefaultLTInterval IfcpLTIorZero,
+    ifcpLclGtwyInstDescr             SnmpAdminString,
+    ifcpLclGtwyInstNumActiveSessions Gauge32,
+    ifcpLclGtwyInstStorageType       StorageType
+                                  }
+
+ifcpLclGtwyInstIndex  OBJECT-TYPE
+    SYNTAX            Unsigned32 (1..2147483647)
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+"An arbitrary integer value to uniquely identify this iFCP
+ Gateway from other local Gateway instances."
+    ::= {ifcpLclGtwyInstEntry      1}
+
+ifcpLclGtwyInstPhyIndex OBJECT-TYPE
+    SYNTAX            PhysicalIndexOrZero
+    MAX-ACCESS        read-only
+    STATUS            current
+    DESCRIPTION
+"An index indicating the location of this local gateway within
+ a larger entity, if one exists.  If supported, this is the
+ entPhysicalIndex from the Entity MIB (Version 3), for this
+ iFCP Gateway.  If not supported, or if not related to a
+ physical entity, then the value of this object is 0."
+    REFERENCE      "Entity MIB (Version 3)"
+    ::= {ifcpLclGtwyInstEntry      2}
+
+ifcpLclGtwyInstVersionMin OBJECT-TYPE
+    SYNTAX            Unsigned32 (0..255)
+    MAX-ACCESS        read-only
+    STATUS            current
+    DESCRIPTION
+"The minimum iFCP protocol version supported by the local iFCP
+ gateway instance."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpLclGtwyInstEntry      3}
+
+ifcpLclGtwyInstVersionMax OBJECT-TYPE
+    SYNTAX            Unsigned32 (0..255)
+    MAX-ACCESS        read-only
+    STATUS            current
+    DESCRIPTION
+"The maximum iFCP protocol version supported by the local iFCP
+ gateway instance."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpLclGtwyInstEntry      4}
+
+ifcpLclGtwyInstAddrTransMode OBJECT-TYPE
+    SYNTAX            IfcpAddressMode
+    MAX-ACCESS        read-write
+    STATUS            current
+    DESCRIPTION
+"The local iFCP gateway operating mode.  Changing this value
+ may cause existing sessions to be disrupted."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    DEFVAL            { addressTranslation }
+    ::= {ifcpLclGtwyInstEntry      5}
+
+ifcpLclGtwyInstFcBrdcstSupport OBJECT-TYPE
+    SYNTAX            TruthValue
+    MAX-ACCESS        read-write
+    STATUS            current
+    DESCRIPTION
+"Whether the local iFCP gateway supports FC Broadcast.
+ Changing this value may cause existing sessions to be
+ disrupted."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    DEFVAL            { false }
+    ::= {ifcpLclGtwyInstEntry      6}
+
+ifcpLclGtwyInstDefaultIpTOV OBJECT-TYPE
+    SYNTAX            IfcpIpTOVorZero
+    MAX-ACCESS        read-write
+    STATUS            current
+    DESCRIPTION
+"The default IP_TOV used for iFCP sessions at this gateway.
+ This is the default maximum propagation delay that will be
+ used for an iFCP session.  The value can be changed on a
+ per-session basis.  The valid range is 0 - 3600 seconds.
+ A value of 0 implies that fibre channel frame lifetime limits
+ will not be enforced."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    DEFVAL            { 6 }
+    ::= {ifcpLclGtwyInstEntry      7}
+
+ifcpLclGtwyInstDefaultLTInterval OBJECT-TYPE
+    SYNTAX            IfcpLTIorZero
+    MAX-ACCESS        read-write
+    STATUS            current
+    DESCRIPTION
+"The default Liveness Test Interval (LTI), in seconds, used
+ for iFCP sessions at this gateway.  This is the default
+ value for an iFCP session and can be changed on a
+ per-session basis.  The valid range is 0 - 65535 seconds.
+ A value of 0 implies no Liveness Test Interval will be
+ performed on a session."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    DEFVAL            { 10 }
+    ::= {ifcpLclGtwyInstEntry      8}
+
+ifcpLclGtwyInstDescr  OBJECT-TYPE
+    SYNTAX            SnmpAdminString (SIZE (0..64))
+    MAX-ACCESS        read-write
+    STATUS            current
+    DESCRIPTION
+"A user-entered description for this iFCP Gateway."
+    DEFVAL            { "" }
+    ::= {ifcpLclGtwyInstEntry      9}
+
+ifcpLclGtwyInstNumActiveSessions OBJECT-TYPE
+    SYNTAX            Gauge32 (0..4294967295)
+    MAX-ACCESS        read-only
+    STATUS            current
+    DESCRIPTION
+"The current total number of iFCP sessions in the open or
+ open-pending state."
+    ::= {ifcpLclGtwyInstEntry      10}
+
+ifcpLclGtwyInstStorageType OBJECT-TYPE
+    SYNTAX            StorageType
+    MAX-ACCESS        read-only
+    STATUS            current
+    DESCRIPTION
+"The storage type for this row.  Parameter values defined
+ for a gateway are usually non-volatile, but may be volatile
+ or permanent in some configurations.  If permanent, then
+ the following parameters must have read-write access:
+ ifcpLclGtwyInstAddrTransMode, ifcpLclGtwyInstDefaultIpTOV,
+ and ifcpLclGtwyInstDefaultLTInterval."
+    DEFVAL            { nonVolatile }
+    ::= {ifcpLclGtwyInstEntry      11}
+
+--
+-- iFCP N Port Session Information ============================
+--
+
+ifcpNportSessionInfo
+           OBJECT IDENTIFIER ::= {ifcpGatewayObjects 2}
+
+ifcpSessionAttributesTable OBJECT-TYPE
+    SYNTAX                         SEQUENCE OF
+                                    IfcpSessionAttributesEntry
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"An iFCP session consists of the pair of N_PORTs comprising
+ the session endpoints joined by a single TCP/IP connection.
+ This table provides information on each iFCP session
+ currently using a local iFCP Gateway instance.  iFCP sessions
+ are created and removed by the iFCP Gateway instances, which
+ are reflected in this table."
+    ::= {ifcpNportSessionInfo 1}
+
+ifcpSessionAttributesEntry OBJECT-TYPE
+    SYNTAX                         IfcpSessionAttributesEntry
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"Each entry contains information about one iFCP session consisting
+ of a pair of N_PORTs joined by a single TCP/IP connection.  This
+ table's INDEX includes ifcpLclGtwyInstIndex, which identifies the
+ local iFCP Gateway instance that created the session for the
+ entry.
+
+ Soon after an entry is created in this table for an iFCP session, it
+ will correspond to an entry in the tcpConnectionTable of the TCP-MIB
+ (RFC 4022).  The corresponding entry might represent a preexisting
+ TCP connection, or it might be a newly-created entry.  (Note that if
+ IPv4 is being used, an entry in RFC 2012's tcpConnTable may also
+ correspond.)  The values of ifcpSessionLclPrtlAddrType and
+ ifcpSessionRmtPrtlIfAddrType in this table and the values of
+ tcpConnectionLocalAddressType and tcpConnectionRemAddressType used
+ as INDEX values for the corresponding entry in the
+ tcpConnectionTable should be the same; this makes it simpler to
+ locate a session's TCP connection in the TCP-MIB.  (Of course, all
+ four values need to be 'ipv4' if there's a corresponding entry in
+ the tcpConnTable.)
+
+ If an entry is created in this table for a session, prior to
+ knowing which local and/or remote port numbers will be used for
+ the TCP connection, then ifcpSessionLclPrtlTcpPort and/or
+ ifcpSessionRmtPrtlTcpPort have the value zero until such time as
+ they can be updated to the port numbers (to be) used for the
+ connection.  (Thus, a port value of zero should not be used to
+ locate a session's TCP connection in the TCP-MIB.)
+
+ When the TCP connection terminates, the entry in the
+ tcpConnectionTable and the entry in this table both get deleted
+ (and, if applicable, so does the entry in the tcpConnTable)."
+    INDEX { ifcpLclGtwyInstIndex, ifcpSessionIndex }
+    ::= {ifcpSessionAttributesTable 1}
+
+IfcpSessionAttributesEntry ::= SEQUENCE {
+    ifcpSessionIndex               Integer32,
+    ifcpSessionLclPrtlIfIndex      InterfaceIndexOrZero,
+    ifcpSessionLclPrtlAddrType     InetAddressType,
+    ifcpSessionLclPrtlAddr         InetAddress,
+    ifcpSessionLclPrtlTcpPort      InetPortNumber,
+    ifcpSessionLclNpWwun           FcNameIdOrZero,
+    ifcpSessionLclNpFcid           FcAddressIdOrZero,
+    ifcpSessionRmtNpWwun           FcNameIdOrZero,
+    ifcpSessionRmtPrtlIfAddrType   InetAddressType,
+    ifcpSessionRmtPrtlIfAddr       InetAddress,
+    ifcpSessionRmtPrtlTcpPort      InetPortNumber,
+    ifcpSessionRmtNpFcid           FcAddressIdOrZero,
+    ifcpSessionRmtNpFcidAlias      FcAddressIdOrZero,
+    ifcpSessionIpTOV               IfcpIpTOVorZero,
+    ifcpSessionLclLTIntvl          IfcpLTIorZero,
+    ifcpSessionRmtLTIntvl          IfcpLTIorZero,
+    ifcpSessionBound               TruthValue,
+    ifcpSessionStorageType         StorageType
+                                       }
+
+ifcpSessionIndex                   OBJECT-TYPE
+    SYNTAX                         Integer32 (1..2147483647)
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"The iFCP session index is a unique value used as an index
+ to the table, along with a specific local iFCP Gateway
+ instance.  This index is used because the local N Port and
+ remote N Port information would create an complex index that
+ would be difficult to implement."
+    ::= {ifcpSessionAttributesEntry 1}
+
+ifcpSessionLclPrtlIfIndex          OBJECT-TYPE
+    SYNTAX                         InterfaceIndexOrZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This is the interface index in the IF-MIB ifTable being used
+ as the local portal in this session, as described in the
+ IF-MIB.  If the local portal is not associated with an entry
+ in the ifTable, then the value is 0.  The ifType of the
+ interface will generally be a type that supports IP, but an
+ implementation may support iFCP using other protocols.  This
+ object can be used to obtain additional information about the
+ interface."
+    REFERENCE     "RFC 2863, The Interfaces Group MIB (IF-MIB)"
+    ::= {ifcpSessionAttributesEntry 2}
+
+ifcpSessionLclPrtlAddrType         OBJECT-TYPE
+    SYNTAX                         InetAddressType
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The type of address in ifcpSessionLclIfAddr."
+    ::= {ifcpSessionAttributesEntry 3}
+
+ifcpSessionLclPrtlAddr             OBJECT-TYPE
+    SYNTAX                         InetAddress
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This is the external IP address of the interface being used
+ for the iFCP local portal in this session.  The address type
+ is defined in ifcpSessionLclPrtlAddrType.  If the value is a
+ DNS name, then the name is resolved once, during the initial
+ session instantiation."
+    ::= {ifcpSessionAttributesEntry 4}
+
+ifcpSessionLclPrtlTcpPort          OBJECT-TYPE
+    SYNTAX                         InetPortNumber
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This is the TCP port number that is being used for the iFCP
+ local portal in this session.  This is normally an ephemeral
+ port number selected by the gateway.  The value may be 0
+ during an initial setup period."
+    ::= {ifcpSessionAttributesEntry 5}
+
+ifcpSessionLclNpWwun               OBJECT-TYPE
+    SYNTAX                         FcNameIdOrZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"World Wide Unique Name of the local N Port.  For an unbound
+ session, this variable will be a zero-length string."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    DEFVAL                         { "" }
+    ::= {ifcpSessionAttributesEntry 6}
+
+ifcpSessionLclNpFcid               OBJECT-TYPE
+    SYNTAX                         FcAddressIdOrZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"Fibre Channel Identifier of the local N Port.  For an unbound
+ session, this variable will be a zero-length string."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 7}
+
+ifcpSessionRmtNpWwun               OBJECT-TYPE
+    SYNTAX                         FcNameIdOrZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"World Wide Unique Name of the remote N Port.  For an unbound
+ session, this variable will be a zero-length string."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    DEFVAL                         { "" }
+    ::= {ifcpSessionAttributesEntry 8}
+
+ifcpSessionRmtPrtlIfAddrType       OBJECT-TYPE
+    SYNTAX                         InetAddressType
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The type of address in ifcpSessionRmtPrtlIfAddr."
+    ::= {ifcpSessionAttributesEntry 9}
+
+ifcpSessionRmtPrtlIfAddr           OBJECT-TYPE
+    SYNTAX                         InetAddress
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This is the remote gateway IP address being used for the
+ portal on the remote iFCP gateway.  The address type is
+ defined in ifcpSessionRmtPrtlIfAddrType.  If the value is a
+ DNS name, then the name is resolved once, during the initial
+ session instantiation."
+    ::= {ifcpSessionAttributesEntry 10}
+
+ifcpSessionRmtPrtlTcpPort          OBJECT-TYPE
+    SYNTAX                         InetPortNumber
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This is the TCP port number being used for the portal on the
+ remote iFCP gateway.  Generally, this will be the iFCP
+ canonical port.  The value may be 0 during an initial setup
+ period."
+    DEFVAL                         { 3420 }
+    ::= {ifcpSessionAttributesEntry 11}
+
+ifcpSessionRmtNpFcid               OBJECT-TYPE
+    SYNTAX                         FcAddressIdOrZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"Fibre Channel Identifier of the remote N Port.  For an
+ unbound session, this variable will be a zero-length string."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 12}
+
+ifcpSessionRmtNpFcidAlias          OBJECT-TYPE
+    SYNTAX                         FcAddressIdOrZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"Fibre Channel Identifier Alias assigned by the local gateway
+ for the remote N Port.  For an unbound session, this variable
+ will be a zero-length string."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 13}
+
+ifcpSessionIpTOV                   OBJECT-TYPE
+    SYNTAX                         IfcpIpTOVorZero
+    MAX-ACCESS                     read-write
+    STATUS                         current
+    DESCRIPTION
+"The IP_TOV being used for this iFCP session.  This is the
+ maximum propagation delay that will be used for the iFCP
+ session.  The value can be changed on a per-session basis
+ and initially defaults to ifcpLclGtwyInstDefaultIpTOV for
+ the local gateway instance.  The valid range is 0 - 3600
+ seconds.  A value of 0 implies fibre channel frame lifetime
+ limits will not be enforced."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 14}
+
+ifcpSessionLclLTIntvl              OBJECT-TYPE
+    SYNTAX                         IfcpLTIorZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The Liveness Test Interval (LTI) used for this iFCP session.
+ The value can be changed on a per-session basis and initially
+ defaults to ifcpLclGtwyInstDefaultLTInterval for the local
+ gateway instance.  The valid range is 0 - 65535 seconds.
+ A value of 0 implies that the gateway will not originate
+ Liveness Test messages for the session."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 15}
+
+ifcpSessionRmtLTIntvl              OBJECT-TYPE
+    SYNTAX                         IfcpLTIorZero
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The Liveness Test Interval (LTI) as requested by the remote
+ gateway instance to use for this iFCP session.  This value may
+ change over the life of the session.  The valid range is 0 -
+ 65535 seconds.  A value of 0 implies that the remote gateway
+ has not been requested to originate Liveness Test messages for
+
+ the session."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 16}
+
+ifcpSessionBound                   OBJECT-TYPE
+    SYNTAX                         TruthValue
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This value indicates whether this session is bound to a
+ specific local and remote N Port.  Sessions by default are
+ unbound and ready for future assignment to a local and remote
+ N Port."
+    REFERENCE      "RFC 4172, iFCP Protocol Specification"
+    ::= {ifcpSessionAttributesEntry 17}
+
+ifcpSessionStorageType             OBJECT-TYPE
+    SYNTAX                         StorageType
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The storage type for this row.  Parameter values defined
+ for a session are usually non-volatile, but may be volatile
+ or permanent in some configurations.  If permanent, then
+ ifcpSessionIpTOV must have read-write access."
+    DEFVAL            { nonVolatile }
+    ::= {ifcpSessionAttributesEntry 18}
+
+--
+-- Local iFCP Gateway Instance Session Statistics =============
+--
+
+ifcpSessionStatsTable              OBJECT-TYPE
+    SYNTAX                         SEQUENCE OF
+                                      IfcpSessionStatsEntry
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"This table provides statistics on an iFCP session."
+    ::= {ifcpNportSessionInfo 2}
+
+ifcpSessionStatsEntry              OBJECT-TYPE
+    SYNTAX                         IfcpSessionStatsEntry
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"Provides iFCP-specific statistics per session."
+    AUGMENTS {ifcpSessionAttributesEntry}
+    ::= {ifcpSessionStatsTable 1}
+
+IfcpSessionStatsEntry ::= SEQUENCE {
+    ifcpSessionState               IfcpSessionStates,
+    ifcpSessionDuration            Unsigned32,
+    ifcpSessionTxOctets            ZeroBasedCounter64,
+    ifcpSessionRxOctets            ZeroBasedCounter64,
+    ifcpSessionTxFrames            ZeroBasedCounter64,
+    ifcpSessionRxFrames            ZeroBasedCounter64,
+    ifcpSessionStaleFrames         ZeroBasedCounter64,
+    ifcpSessionHeaderCRCErrors     ZeroBasedCounter64,
+    ifcpSessionFcPayloadCRCErrors  ZeroBasedCounter64,
+    ifcpSessionOtherErrors         ZeroBasedCounter64,
+    ifcpSessionDiscontinuityTime   TimeStamp
+                                   }
+
+ifcpSessionState                   OBJECT-TYPE
+    SYNTAX                         IfcpSessionStates
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The current session operating state."
+    ::= {ifcpSessionStatsEntry 1}
+
+ifcpSessionDuration                OBJECT-TYPE
+    SYNTAX                         Unsigned32 (0..4294967295)
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"This indicates, in seconds, how long the iFCP session has
+ been in an open or open-pending state.  When a session is
+ down, the value is reset to 0."
+    ::= {ifcpSessionStatsEntry 2}
+
+ifcpSessionTxOctets                OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of octets transmitted by the iFCP gateway
+ for this session.  Discontinuities in the value of this
+ counter can occur at reinitialization of the management
+ system, and at other times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 3}
+
+ifcpSessionRxOctets                OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of octets received by the iFCP gateway for
+ this session.  Discontinuities in the value of this
+ counter can occur at reinitialization of the management
+ system, and at other times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 4}
+
+ifcpSessionTxFrames                OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of iFCP frames transmitted by the gateway
+ for this session.  Discontinuities in the value of this
+ counter can occur at reinitialization of the management
+ system, and at other times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 5}
+
+ifcpSessionRxFrames                OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of iFCP frames received by the gateway
+ for this session.  Discontinuities in the value of this
+ counter can occur at reinitialization of the management
+ system, and at other times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 6}
+
+ifcpSessionStaleFrames             OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of received iFCP frames that were stale and
+ discarded by the gateway for this session.  Discontinuities
+ in the value of this counter can occur at reinitialization
+ of the management system, and at other times as indicated by
+ the value of ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 7}
+
+ifcpSessionHeaderCRCErrors         OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of CRC errors that occurred in the frame
+ header, detected by the gateway for this session.  Usually,
+ a single Header CRC error is sufficient to terminate an
+ iFCP session.  Discontinuities in the value of this
+ counter can occur at reinitialization of the management
+ system, and at other times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 8}
+
+ifcpSessionFcPayloadCRCErrors      OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of CRC errors that occurred in the Fibre
+ Channel frame payload, detected by the gateway for this
+ session.  Discontinuities in the value of this counter can
+ occur at reinitialization of the management system, and
+ at other times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 9}
+
+ifcpSessionOtherErrors             OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter64
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of errors, other than errors explicitly
+ measured, detected by the gateway for this session.
+ Discontinuities in the value of this counter can occur at
+ reinitialization of the management system, and at other
+ times as indicated by the value of
+ ifcpSessionDiscontinuityTime."
+    ::= {ifcpSessionStatsEntry 10}
+
+ifcpSessionDiscontinuityTime       OBJECT-TYPE
+    SYNTAX                         TimeStamp
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The value of sysUpTime on the most recent occasion at which
+ any one (or more) of the ifcpSessionStatsTable counters
+ suffered a discontinuity.  The relevant counters are the
+ specific Counter64-based instances associated with the
+ ifcpSessionStatsTable: ifcpSessionTxOctets,
+ ifcpSessionRxOctets, ifcpSessionTxFrames,
+ ifcpSessionRxFrames, ifcpSessionStaleFrames,
+ ifcpSessionHeaderCRCErrors, ifcpSessionFcPayloadCRCErrors,
+ and ifcpSessionOtherErrors.  If no such discontinuities have
+ occurred since the last reinitialization of the local
+ management subsystem, then this object contains a zero value."
+    ::= {ifcpSessionStatsEntry 11}
+
+--
+-- Low Capacity Statistics
+--
+
+ifcpSessionLcStatsTable            OBJECT-TYPE
+    SYNTAX                         SEQUENCE OF
+                                     IfcpSessionLcStatsEntry
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"This table provides low capacity statistics for an iFCP
+ session.  These are provided for backward compatibility with
+ systems that do not support Counter64-based objects.  At
+ 1-Gbps rates, a Counter32-based object can wrap as often as
+ every 34 seconds.  Counter32-based objects can be sufficient
+ for many situations.  However, when possible, it is
+ recommended to use the high capacity statistics in
+ ifcpSessionStatsTable based on Counter64 objects."
+    ::= {ifcpNportSessionInfo 3}
+
+ifcpSessionLcStatsEntry            OBJECT-TYPE
+    SYNTAX                         IfcpSessionLcStatsEntry
+    MAX-ACCESS                     not-accessible
+    STATUS                         current
+    DESCRIPTION
+"Provides iFCP-specific statistics per session."
+    AUGMENTS {ifcpSessionAttributesEntry}
+    ::= {ifcpSessionLcStatsTable 1}
+
+IfcpSessionLcStatsEntry ::= SEQUENCE {
+    ifcpSessionLcTxOctets            ZeroBasedCounter32,
+    ifcpSessionLcRxOctets            ZeroBasedCounter32,
+    ifcpSessionLcTxFrames            ZeroBasedCounter32,
+    ifcpSessionLcRxFrames            ZeroBasedCounter32,
+    ifcpSessionLcStaleFrames         ZeroBasedCounter32,
+    ifcpSessionLcHeaderCRCErrors     ZeroBasedCounter32,
+    ifcpSessionLcFcPayloadCRCErrors  ZeroBasedCounter32,
+    ifcpSessionLcOtherErrors         ZeroBasedCounter32
+                                   }
+
+ifcpSessionLcTxOctets              OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of octets transmitted by the iFCP gateway
+ for this session."
+    ::= {ifcpSessionLcStatsEntry 1}
+
+ifcpSessionLcRxOctets              OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of octets received by the iFCP gateway for
+ this session."
+    ::= {ifcpSessionLcStatsEntry 2}
+
+ifcpSessionLcTxFrames              OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of iFCP frames transmitted by the gateway
+ for this session."
+    ::= {ifcpSessionLcStatsEntry 3}
+
+ifcpSessionLcRxFrames              OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of iFCP frames received by the gateway
+ for this session."
+    ::= {ifcpSessionLcStatsEntry 4}
+
+ifcpSessionLcStaleFrames           OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of received iFCP frames that were stale and
+ discarded by the gateway for this session."
+    ::= {ifcpSessionLcStatsEntry 5}
+
+ifcpSessionLcHeaderCRCErrors       OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of CRC errors that occurred in the frame
+ header, detected by the gateway for this session.  Usually,
+ a single Header CRC error is sufficient to terminate an
+ iFCP session."
+    ::= {ifcpSessionLcStatsEntry 6}
+
+ifcpSessionLcFcPayloadCRCErrors    OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of CRC errors that occurred in the Fibre
+ Channel frame payload, detected by the gateway for this
+ session."
+    ::= {ifcpSessionLcStatsEntry 7}
+
+ifcpSessionLcOtherErrors           OBJECT-TYPE
+    SYNTAX                         ZeroBasedCounter32
+    MAX-ACCESS                     read-only
+    STATUS                         current
+    DESCRIPTION
+"The total number of errors, other than errors explicitly
+ measured, detected by the gateway for this session."
+    ::= {ifcpSessionLcStatsEntry 8}
+
+--==========================================================
+
+ifcpCompliances
+        OBJECT IDENTIFIER ::= {ifcpGatewayConformance 1}
+
+ifcpGatewayCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+"Implementation requirements for iFCP MIB compliance."
+    MODULE       -- this module
+    MANDATORY-GROUPS {
+        ifcpLclGatewayGroup,
+        ifcpLclGatewaySessionGroup,
+        ifcpLclGatewaySessionStatsGroup,
+        ifcpLclGatewaySessionLcStatsGroup
+                     }
+
+        OBJECT      ifcpSessionLclPrtlAddrType
+        SYNTAX      InetAddressType { ipv4(1), ipv6(2) }
+        DESCRIPTION
+               "Support is only required for global IPv4
+
+               and IPv6 address types."
+
+        OBJECT      ifcpSessionRmtPrtlIfAddrType
+        SYNTAX      InetAddressType { ipv4(1), ipv6(2) }
+        DESCRIPTION
+               "Support is only required for global IPv4
+               and IPv6 address types."
+    ::= {ifcpCompliances 1}
+
+ifcpGroups OBJECT IDENTIFIER ::= {ifcpGatewayConformance 2}
+
+ifcpLclGatewayGroup OBJECT-GROUP
+    OBJECTS {
+    ifcpLclGtwyInstPhyIndex,
+    ifcpLclGtwyInstVersionMin,
+    ifcpLclGtwyInstVersionMax,
+    ifcpLclGtwyInstAddrTransMode,
+    ifcpLclGtwyInstFcBrdcstSupport,
+    ifcpLclGtwyInstDefaultIpTOV,
+    ifcpLclGtwyInstDefaultLTInterval,
+    ifcpLclGtwyInstDescr,
+    ifcpLclGtwyInstNumActiveSessions,
+    ifcpLclGtwyInstStorageType
+           }
+    STATUS current
+    DESCRIPTION
+"iFCP local device info group.  This group provides
+ information about each gateway."
+    ::= {ifcpGroups 1}
+
+ifcpLclGatewaySessionGroup OBJECT-GROUP
+    OBJECTS {
+    ifcpSessionLclPrtlIfIndex,
+    ifcpSessionLclPrtlAddrType,
+    ifcpSessionLclPrtlAddr,
+    ifcpSessionLclPrtlTcpPort,
+    ifcpSessionLclNpWwun,
+    ifcpSessionLclNpFcid,
+    ifcpSessionRmtNpWwun,
+    ifcpSessionRmtPrtlIfAddrType,
+    ifcpSessionRmtPrtlIfAddr,
+    ifcpSessionRmtPrtlTcpPort,
+    ifcpSessionRmtNpFcid,
+    ifcpSessionRmtNpFcidAlias,
+    ifcpSessionIpTOV,
+    ifcpSessionLclLTIntvl,
+    ifcpSessionRmtLTIntvl,
+    ifcpSessionBound,
+    ifcpSessionStorageType
+           }
+    STATUS current
+    DESCRIPTION
+"iFCP Session group.  This group provides information
+ about each iFCP session currently active between iFCP
+ gateways."
+    ::= {ifcpGroups 4}
+
+ifcpLclGatewaySessionStatsGroup OBJECT-GROUP
+    OBJECTS {
+    ifcpSessionState,
+    ifcpSessionDuration,
+    ifcpSessionTxOctets,
+    ifcpSessionRxOctets,
+    ifcpSessionTxFrames,
+    ifcpSessionRxFrames,
+    ifcpSessionStaleFrames,
+    ifcpSessionHeaderCRCErrors,
+    ifcpSessionFcPayloadCRCErrors,
+    ifcpSessionOtherErrors,
+    ifcpSessionDiscontinuityTime
+           }
+    STATUS current
+    DESCRIPTION
+"iFCP Session Statistics group.  This group provides
+ statistics with 64-bit counters for each iFCP session
+ currently active between iFCP gateways.  This group
+ is only required for agents that can support Counter64-
+ based data types."
+    ::= {ifcpGroups 5}
+
+ifcpLclGatewaySessionLcStatsGroup OBJECT-GROUP
+    OBJECTS {
+    ifcpSessionLcTxOctets,
+    ifcpSessionLcRxOctets,
+    ifcpSessionLcTxFrames,
+    ifcpSessionLcRxFrames,
+    ifcpSessionLcStaleFrames,
+    ifcpSessionLcHeaderCRCErrors,
+    ifcpSessionLcFcPayloadCRCErrors,
+    ifcpSessionLcOtherErrors
+           }
+    STATUS current
+    DESCRIPTION
+"iFCP Session Low Capacity Statistics group.  This group
+ provides statistics with low-capacity 32-bit counters
+
+ for each iFCP session currently active between iFCP
+ gateways.  This group is only required for agents that
+ do not support Counter64-based data types, or that need
+ to support SNMPv1 applications."
+    ::= {ifcpGroups 6}
+
+END
diff --git a/snmp_builder/mibs/IGMP-STD-MIB.mib b/snmp_builder/mibs/IGMP-STD-MIB.mib
new file mode 100644
index 0000000..1bc6c8d
--- /dev/null
+++ b/snmp_builder/mibs/IGMP-STD-MIB.mib
@@ -0,0 +1,516 @@
+IGMP-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2, Counter32, Gauge32,
+    Unsigned32, IpAddress, TimeTicks FROM SNMPv2-SMI
+    RowStatus, TruthValue            FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
+    InterfaceIndexOrZero,
+    InterfaceIndex                   FROM IF-MIB;
+
+igmpStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200009280000Z" -- September 28, 2000
+    ORGANIZATION "IETF IDMR Working Group."
+    CONTACT-INFO
+            " Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA  98052-6399
+              US
+
+              Phone: +1 425 703 8835
+              EMail: dthaler@microsoft.com"
+    DESCRIPTION
+            "The MIB module for IGMP Management."
+    REVISION     "200009280000Z" -- September 28, 2000
+    DESCRIPTION
+            "Initial version, published as RFC 2933."
+    ::= { mib-2 85 }
+
+igmpMIBObjects     OBJECT IDENTIFIER ::= { igmpStdMIB 1 }
+
+--
+--  The IGMP Interface Table
+--
+
+igmpInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IgmpInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interfaces on which IGMP
+            is enabled."
+    ::= { igmpMIBObjects 1 }
+
+igmpInterfaceEntry OBJECT-TYPE
+    SYNTAX     IgmpInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) representing an interface on
+            which IGMP is enabled."
+    INDEX      { igmpInterfaceIfIndex }
+    ::= { igmpInterfaceTable 1 }
+
+IgmpInterfaceEntry ::= SEQUENCE {
+    igmpInterfaceIfIndex               InterfaceIndex,
+    igmpInterfaceQueryInterval         Unsigned32,
+    igmpInterfaceStatus                RowStatus,
+    igmpInterfaceVersion               Unsigned32,
+    igmpInterfaceQuerier               IpAddress,
+    igmpInterfaceQueryMaxResponseTime  Unsigned32,
+    igmpInterfaceQuerierUpTime         TimeTicks,
+    igmpInterfaceQuerierExpiryTime     TimeTicks,
+    igmpInterfaceVersion1QuerierTimer  TimeTicks,
+    igmpInterfaceWrongVersionQueries   Counter32,
+    igmpInterfaceJoins                 Counter32,
+    igmpInterfaceProxyIfIndex          InterfaceIndexOrZero,
+    igmpInterfaceGroups                Gauge32,
+    igmpInterfaceRobustness            Unsigned32,
+    igmpInterfaceLastMembQueryIntvl    Unsigned32
+}
+
+igmpInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for which IGMP is
+            enabled."
+    ::= { igmpInterfaceEntry 1 }
+
+igmpInterfaceQueryInterval OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which IGMP Host-Query packets are
+            transmitted on this interface."
+    DEFVAL     { 125 }
+    ::= { igmpInterfaceEntry 2 }
+
+igmpInterfaceStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The activation of a row enables IGMP on the interface.  The
+            destruction of a row disables IGMP on the interface."
+    ::= { igmpInterfaceEntry 3 }
+
+igmpInterfaceVersion OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The version of IGMP which is running on this interface.
+            This object can be used to configure a router capable of
+            running either value.  For IGMP to function correctly, all
+            routers on a LAN must be configured to run the same version
+            of IGMP on that LAN."
+    DEFVAL     { 2 }
+    ::= { igmpInterfaceEntry 4 }
+
+igmpInterfaceQuerier OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the IGMP Querier on the IP subnet to which
+
+            this interface is attached."
+    ::= { igmpInterfaceEntry 5 }
+
+igmpInterfaceQueryMaxResponseTime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    UNITS      "tenths of seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum query response time advertised in IGMPv2
+            queries on this interface."
+    DEFVAL     { 100 }
+    ::= { igmpInterfaceEntry 6 }
+
+igmpInterfaceQuerierUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since igmpInterfaceQuerier was last changed."
+    ::= { igmpInterfaceEntry 7 }
+
+igmpInterfaceQuerierExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of time remaining before the Other Querier
+            Present Timer expires.  If the local system is the querier,
+            the value of this object is zero."
+    ::= { igmpInterfaceEntry 8 }
+
+igmpInterfaceVersion1QuerierTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining until the host assumes that there are no
+            IGMPv1 routers present on the interface.  While this is non-
+            zero, the host will reply to all queries with version 1
+            membership reports."
+    ::= { igmpInterfaceEntry 9 }
+
+igmpInterfaceWrongVersionQueries OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of queries received whose IGMP version does not
+            match igmpInterfaceVersion, over the lifetime of the row
+            entry.  IGMP requires that all routers on a LAN be
+            configured to run the same version of IGMP.  Thus, if any
+            queries are received with the wrong version, this indicates
+            a configuration error."
+    ::= { igmpInterfaceEntry 10 }
+
+igmpInterfaceJoins OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a group membership has been added on
+            this interface; that is, the number of times an entry for
+            this interface has been added to the Cache Table.  This
+            object gives an indication of the amount of IGMP activity
+            over the lifetime of the row entry."
+    ::= { igmpInterfaceEntry 11 }
+
+igmpInterfaceProxyIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Some devices implement a form of IGMP proxying whereby
+            memberships learned on the interface represented by this
+            row, cause IGMP Host Membership Reports to be sent on the
+            interface whose ifIndex value is given by this object.  Such
+            a device would implement the igmpV2RouterMIBGroup only on
+            its router interfaces (those interfaces with non-zero
+            igmpInterfaceProxyIfIndex).  Typically, the value of this
+            object is 0, indicating that no proxying is being done."
+    DEFVAL     { 0 }
+    ::= { igmpInterfaceEntry 12 }
+
+igmpInterfaceGroups OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The current number of entries for this interface in the
+            Cache Table."
+    ::= { igmpInterfaceEntry 13 }
+
+igmpInterfaceRobustness OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The Robustness Variable allows tuning for the expected
+            packet loss on a subnet.  If a subnet is expected to be
+            lossy, the Robustness Variable may be increased.  IGMP is
+            robust to (Robustness Variable-1) packet losses."
+    DEFVAL     { 2 }
+    ::= { igmpInterfaceEntry 14 }
+
+igmpInterfaceLastMembQueryIntvl OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    UNITS      "tenths of seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The Last Member Query Interval is the Max Response Time
+            inserted into Group-Specific Queries sent in response to
+            Leave Group messages, and is also the amount of time between
+            Group-Specific Query messages.  This value may be tuned to
+            modify the leave latency of the network.  A reduced value
+            results in reduced time to detect the loss of the last
+            member of a group.  The value of this object is irrelevant
+            if igmpInterfaceVersion is 1."
+    DEFVAL     { 10 }
+    ::= { igmpInterfaceEntry 15 }
+
+--
+--  The IGMP Cache Table
+--
+
+igmpCacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IgmpCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the IP multicast groups for
+            which there are members on a particular interface."
+    ::= { igmpMIBObjects 2 }
+
+igmpCacheEntry OBJECT-TYPE
+    SYNTAX     IgmpCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the igmpCacheTable."
+    INDEX      { igmpCacheAddress, igmpCacheIfIndex }
+    ::= { igmpCacheTable 1 }
+
+IgmpCacheEntry ::= SEQUENCE {
+    igmpCacheAddress            IpAddress,
+    igmpCacheIfIndex            InterfaceIndex,
+    igmpCacheSelf               TruthValue,
+    igmpCacheLastReporter       IpAddress,
+    igmpCacheUpTime             TimeTicks,
+    igmpCacheExpiryTime         TimeTicks,
+    igmpCacheStatus             RowStatus,
+    igmpCacheVersion1HostTimer  TimeTicks
+}
+
+igmpCacheAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information."
+    ::= { igmpCacheEntry 1 }
+
+igmpCacheIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information for
+            an IP multicast group address."
+    ::= { igmpCacheEntry 2 }
+
+igmpCacheSelf OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "An indication of whether the local system is a member of
+            this group address on this interface."
+    DEFVAL     { true }
+    ::= { igmpCacheEntry 3 }
+
+igmpCacheLastReporter OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the source of the last membership report
+            received for this IP Multicast group address on this
+            interface.  If no membership report has been received, this
+            object has the value 0.0.0.0."
+    ::= { igmpCacheEntry 4 }
+
+igmpCacheUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time elapsed since this entry was created."
+    ::= { igmpCacheEntry 5 }
+
+igmpCacheExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  A value of 0 indicates that the entry is only
+            present because igmpCacheSelf is true and that if the router
+            left the group, this entry would be aged out immediately.
+            Note that some implementations may process membership
+            reports from the local system in the same way as reports
+            from other hosts, so a value of 0 is not required."
+    ::= { igmpCacheEntry 6 }
+
+igmpCacheStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this entry."
+    ::= { igmpCacheEntry 7 }
+
+igmpCacheVersion1HostTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining until the local router will assume that
+            there are no longer any IGMP version 1 members on the IP
+            subnet attached to this interface.  Upon hearing any IGMPv1
+            Membership Report, this value is reset to the group
+            membership timer.  While this time remaining is non-zero,
+            the local router ignores any IGMPv2 Leave messages for this
+            group that it receives on this interface."
+    ::= { igmpCacheEntry 8 }
+
+-- conformance information
+
+igmpMIBConformance
+               OBJECT IDENTIFIER ::= { igmpStdMIB 2 }
+igmpMIBCompliances
+               OBJECT IDENTIFIER ::= { igmpMIBConformance 1 }
+igmpMIBGroups  OBJECT IDENTIFIER ::= { igmpMIBConformance 2 }
+
+-- compliance statements
+
+igmpV1HostMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts running IGMPv1 and
+            implementing the IGMP MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { igmpBaseMIBGroup }
+
+    OBJECT     igmpInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+
+    OBJECT     igmpCacheStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { igmpMIBCompliances 1 }
+
+igmpV1RouterMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers running IGMPv1 and
+            implementing the IGMP MIB."
+    MODULE  -- this module
+      MANDATORY-GROUPS { igmpBaseMIBGroup,
+                       igmpRouterMIBGroup
+                     }
+
+    OBJECT     igmpInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    OBJECT     igmpCacheStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { igmpMIBCompliances 2 }
+
+igmpV2HostMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts running IGMPv2 and
+            implementing the IGMP MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { igmpBaseMIBGroup,
+                       igmpV2HostMIBGroup
+                     }
+
+    OBJECT     igmpInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+
+    OBJECT     igmpCacheStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { igmpMIBCompliances 3 }
+
+igmpV2RouterMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers running IGMPv2 and
+            implementing the IGMP MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { igmpBaseMIBGroup,
+                       igmpRouterMIBGroup,
+                       igmpV2RouterMIBGroup
+                     }
+
+    OBJECT     igmpInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    OBJECT     igmpCacheStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { igmpMIBCompliances 4 }
+
+-- units of conformance
+
+igmpBaseMIBGroup OBJECT-GROUP
+    OBJECTS { igmpCacheSelf,
+              igmpCacheStatus, igmpInterfaceStatus
+            }
+    STATUS  current
+    DESCRIPTION
+            "The basic collection of objects providing management of
+            IGMP version 1 or 2."
+    ::= { igmpMIBGroups 1 }
+
+igmpRouterMIBGroup OBJECT-GROUP
+    OBJECTS { igmpCacheUpTime, igmpCacheExpiryTime,
+              igmpInterfaceJoins, igmpInterfaceGroups,
+              igmpCacheLastReporter, igmpInterfaceQuerierUpTime,
+              igmpInterfaceQuerierExpiryTime,
+              igmpInterfaceQueryInterval
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of IGMP
+            version 1 or 2 in routers."
+    ::= { igmpMIBGroups 2 }
+
+igmpV2HostMIBGroup OBJECT-GROUP
+    OBJECTS { igmpInterfaceVersion1QuerierTimer }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of IGMP
+            version 2 in hosts."
+    ::= { igmpMIBGroups 3 }
+
+igmpHostOptMIBGroup OBJECT-GROUP
+    OBJECTS { igmpCacheLastReporter, igmpInterfaceQuerier }
+    STATUS  current
+    DESCRIPTION
+            "A collection of optional objects for IGMP hosts.
+            Supporting this group can be especially useful in an
+            environment with a router which does not support the IGMP
+            MIB."
+    ::= { igmpMIBGroups 4 }
+
+igmpV2RouterMIBGroup OBJECT-GROUP
+    OBJECTS { igmpInterfaceVersion, igmpInterfaceQuerier,
+              igmpInterfaceQueryMaxResponseTime,
+              igmpInterfaceRobustness,
+              igmpInterfaceWrongVersionQueries,
+              igmpInterfaceLastMembQueryIntvl,
+              igmpCacheVersion1HostTimer
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of IGMP
+            version 2 in routers."
+    ::= { igmpMIBGroups 5 }
+
+igmpV2ProxyMIBGroup OBJECT-GROUP
+    OBJECTS { igmpInterfaceProxyIfIndex }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of IGMP
+            proxy devices."
+    ::= { igmpMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/INET-ADDRESS-MIB.mib b/snmp_builder/mibs/INET-ADDRESS-MIB.mib
new file mode 100644
index 0000000..a778cba
--- /dev/null
+++ b/snmp_builder/mibs/INET-ADDRESS-MIB.mib
@@ -0,0 +1,402 @@
+INET-ADDRESS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2, Unsigned32 FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                 FROM SNMPv2-TC;
+
+inetAddressMIB MODULE-IDENTITY
+    LAST-UPDATED "200502040000Z"
+    ORGANIZATION
+        "IETF Operations and Management Area"
+    CONTACT-INFO
+        "Juergen Schoenwaelder (Editor)
+         International University Bremen
+         P.O. Box 750 561
+         28725 Bremen, Germany
+
+         Phone: +49 421 200-3587
+         EMail: j.schoenwaelder@iu-bremen.de
+
+         Send comments to <ietfmibs@ops.ietf.org>."
+    DESCRIPTION
+        "This MIB module defines textual conventions for
+         representing Internet addresses.  An Internet
+         address can be an IPv4 address, an IPv6 address,
+         or a DNS domain name.  This module also defines
+         textual conventions for Internet port numbers,
+         autonomous system numbers, and the length of an
+         Internet address prefix.
+
+         Copyright (C) The Internet Society (2005).  This version
+         of this MIB module is part of RFC 4001, see the RFC
+         itself for full legal notices."
+    REVISION     "200502040000Z"
+    DESCRIPTION
+        "Third version, published as RFC 4001.  This revision
+         introduces the InetZoneIndex, InetScopeType, and
+         InetVersion textual conventions."
+    REVISION     "200205090000Z"
+    DESCRIPTION
+        "Second version, published as RFC 3291.  This
+         revision contains several clarifications and
+         introduces several new textual conventions:
+         InetAddressPrefixLength, InetPortNumber,
+         InetAutonomousSystemNumber, InetAddressIPv4z,
+         and InetAddressIPv6z."
+    REVISION     "200006080000Z"
+    DESCRIPTION
+        "Initial version, published as RFC 2851."
+    ::= { mib-2 76 }
+
+InetAddressType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value that represents a type of Internet address.
+
+         unknown(0)  An unknown address type.  This value MUST
+                     be used if the value of the corresponding
+                     InetAddress object is a zero-length string.
+                     It may also be used to indicate an IP address
+                     that is not in one of the formats defined
+                     below.
+
+         ipv4(1)     An IPv4 address as defined by the
+                     InetAddressIPv4 textual convention.
+
+         ipv6(2)     An IPv6 address as defined by the
+                     InetAddressIPv6 textual convention.
+
+         ipv4z(3)    A non-global IPv4 address including a zone
+                     index as defined by the InetAddressIPv4z
+                     textual convention.
+
+         ipv6z(4)    A non-global IPv6 address including a zone
+                     index as defined by the InetAddressIPv6z
+                     textual convention.
+
+         dns(16)     A DNS domain name as defined by the
+                     InetAddressDNS textual convention.
+
+         Each definition of a concrete InetAddressType value must be
+         accompanied by a definition of a textual convention for use
+         with that InetAddressType.
+
+         To support future extensions, the InetAddressType textual
+         convention SHOULD NOT be sub-typed in object type definitions.
+         It MAY be sub-typed in compliance statements in order to
+         require only a subset of these address types for a compliant
+         implementation.
+
+         Implementations must ensure that InetAddressType objects
+         and any dependent objects (e.g., InetAddress objects) are
+         consistent.  An inconsistentValue error must be generated
+         if an attempt to change an InetAddressType object would,
+         for example, lead to an undefined InetAddress value.  In
+
+         particular, InetAddressType/InetAddress pairs must be
+         changed together if the address type changes (e.g., from
+         ipv6(2) to ipv4(1))."
+    SYNTAX       INTEGER {
+                     unknown(0),
+                     ipv4(1),
+                     ipv6(2),
+                     ipv4z(3),
+                     ipv6z(4),
+                     dns(16)
+                 }
+
+InetAddress ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Denotes a generic Internet address.
+
+         An InetAddress value is always interpreted within the context
+         of an InetAddressType value.  Every usage of the InetAddress
+         textual convention is required to specify the InetAddressType
+         object that provides the context.  It is suggested that the
+         InetAddressType object be logically registered before the
+         object(s) that use the InetAddress textual convention, if
+         they appear in the same logical row.
+
+         The value of an InetAddress object must always be
+         consistent with the value of the associated InetAddressType
+         object.  Attempts to set an InetAddress object to a value
+         inconsistent with the associated InetAddressType
+         must fail with an inconsistentValue error.
+
+         When this textual convention is used as the syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58.  In this case,
+         the object definition MUST include a 'SIZE' clause to
+         limit the number of potential instance sub-identifiers;
+         otherwise the applicable constraints MUST be stated in
+         the appropriate conceptual row DESCRIPTION clauses, or
+         in the surrounding documentation if there is no single
+         DESCRIPTION clause that is appropriate."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+InetAddressIPv4 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d"
+    STATUS       current
+    DESCRIPTION
+        "Represents an IPv4 network address:
+
+           Octets   Contents         Encoding
+            1-4     IPv4 address     network-byte order
+
+         The corresponding InetAddressType value is ipv4(1).
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (4))
+
+InetAddressIPv6 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
+    STATUS       current
+    DESCRIPTION
+        "Represents an IPv6 network address:
+
+           Octets   Contents         Encoding
+            1-16    IPv6 address     network-byte order
+
+         The corresponding InetAddressType value is ipv6(2).
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (16))
+
+InetAddressIPv4z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d%4d"
+    STATUS       current
+    DESCRIPTION
+        "Represents a non-global IPv4 network address, together
+         with its zone index:
+
+           Octets   Contents         Encoding
+            1-4     IPv4 address     network-byte order
+            5-8     zone index       network-byte order
+
+         The corresponding InetAddressType value is ipv4z(3).
+
+         The zone index (bytes 5-8) is used to disambiguate identical
+         address values on nodes that have interfaces attached to
+         different zones of the same scope.  The zone index may contain
+         the special value 0, which refers to the default zone for each
+         scope.
+
+         This textual convention SHOULD NOT be used directly in object
+
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (8))
+
+InetAddressIPv6z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x%4d"
+    STATUS       current
+    DESCRIPTION
+        "Represents a non-global IPv6 network address, together
+         with its zone index:
+
+           Octets   Contents         Encoding
+            1-16    IPv6 address     network-byte order
+           17-20    zone index       network-byte order
+
+         The corresponding InetAddressType value is ipv6z(4).
+
+         The zone index (bytes 17-20) is used to disambiguate
+         identical address values on nodes that have interfaces
+         attached to different zones of the same scope.  The zone index
+         may contain the special value 0, which refers to the default
+         zone for each scope.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (20))
+
+InetAddressDNS ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+        "Represents a DNS domain name.  The name SHOULD be fully
+         qualified whenever possible.
+
+         The corresponding InetAddressType is dns(16).
+
+         The DESCRIPTION clause of InetAddress objects that may have
+         InetAddressDNS values MUST fully describe how (and when)
+         these names are to be resolved to IP addresses.
+
+         The resolution of an InetAddressDNS value may require to
+         query multiple DNS records (e.g., A for IPv4 and AAAA for
+         IPv6).  The order of the resolution process and which DNS
+         record takes precedence depends on the configuration of the
+         resolver.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (1..255))
+
+InetAddressPrefixLength ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "Denotes the length of a generic Internet network address
+         prefix.  A value of n corresponds to an IP address mask
+         that has n contiguous 1-bits from the most significant
+         bit (MSB), with all other bits set to 0.
+
+         An InetAddressPrefixLength value is always interpreted within
+         the context of an InetAddressType value.  Every usage of the
+         InetAddressPrefixLength textual convention is required to
+         specify the InetAddressType object that provides the
+         context.  It is suggested that the InetAddressType object be
+         logically registered before the object(s) that use the
+         InetAddressPrefixLength textual convention, if they appear
+         in the same logical row.
+
+         InetAddressPrefixLength values larger than
+         the maximum length of an IP address for a specific
+         InetAddressType are treated as the maximum significant
+         value applicable for the InetAddressType.  The maximum
+         significant value is 32 for the InetAddressType
+         'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType
+         'ipv6(2)' and 'ipv6z(4)'.  The maximum significant value
+         for the InetAddressType 'dns(16)' is 0.
+
+         The value zero is object-specific and must be defined as
+         part of the description of any object that uses this
+         syntax.  Examples of the usage of zero might include
+         situations where the Internet network address prefix
+         is unknown or does not apply.
+
+         The upper bound of the prefix length has been chosen to
+         be consistent with the maximum size of an InetAddress."
+    SYNTAX       Unsigned32 (0..2040)
+
+InetPortNumber ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "Represents a 16 bit port number of an Internet transport
+
+         layer protocol.  Port numbers are assigned by IANA.  A
+         current list of all assignments is available from
+         <http://www.iana.org/>.
+
+         The value zero is object-specific and must be defined as
+         part of the description of any object that uses this
+         syntax.  Examples of the usage of zero might include
+         situations where a port number is unknown, or when the
+         value zero is used as a wildcard in a filter."
+    REFERENCE   "STD 6 (RFC 768), STD 7 (RFC 793) and RFC 2960"
+    SYNTAX       Unsigned32 (0..65535)
+
+InetAutonomousSystemNumber ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "Represents an autonomous system number that identifies an
+         Autonomous System (AS).  An AS is a set of routers under a
+         single technical administration, using an interior gateway
+         protocol and common metrics to route packets within the AS,
+         and using an exterior gateway protocol to route packets to
+         other ASes'.  IANA maintains the AS number space and has
+         delegated large parts to the regional registries.
+
+         Autonomous system numbers are currently limited to 16 bits
+         (0..65535).  There is, however, work in progress to enlarge the
+         autonomous system number space to 32 bits.  Therefore, this
+         textual convention uses an Unsigned32 value without a
+         range restriction in order to support a larger autonomous
+         system number space."
+    REFERENCE   "RFC 1771, RFC 1930"
+    SYNTAX       Unsigned32
+
+InetScopeType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "Represents a scope type.  This textual convention can be used
+         in cases where a MIB has to represent different scope types
+         and there is no context information, such as an InetAddress
+         object, that implicitly defines the scope type.
+
+         Note that not all possible values have been assigned yet, but
+         they may be assigned in future revisions of this specification.
+         Applications should therefore be able to deal with values
+         not yet assigned."
+    REFERENCE   "RFC 3513"
+    SYNTAX       INTEGER {
+                     -- reserved(0),
+                     interfaceLocal(1),
+                     linkLocal(2),
+                     subnetLocal(3),
+                     adminLocal(4),
+                     siteLocal(5), -- site-local unicast addresses
+                                   -- have been deprecated by RFC 3879
+                     -- unassigned(6),
+                     -- unassigned(7),
+                     organizationLocal(8),
+                     -- unassigned(9),
+                     -- unassigned(10),
+                     -- unassigned(11),
+                     -- unassigned(12),
+                     -- unassigned(13),
+                     global(14)
+                     -- reserved(15)
+                 }
+
+InetZoneIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "A zone index identifies an instance of a zone of a
+         specific scope.
+
+         The zone index MUST disambiguate identical address
+         values.  For link-local addresses, the zone index will
+         typically be the interface index (ifIndex as defined in the
+         IF-MIB) of the interface on which the address is configured.
+
+         The zone index may contain the special value 0, which refers
+         to the default zone.  The default zone may be used in cases
+         where the valid zone index is not known (e.g., when a
+         management application has to write a link-local IPv6
+         address without knowing the interface index value).  The
+         default zone SHOULD NOT be used as an easy way out in
+         cases where the zone index for a non-global IPv6 address
+         is known."
+    REFERENCE   "RFC4007"
+    SYNTAX       Unsigned32
+
+InetVersion ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A value representing a version of the IP protocol.
+
+         unknown(0)  An unknown or unspecified version of the IP
+                     protocol.
+
+         ipv4(1)     The IPv4 protocol as defined in RFC 791 (STD 5).
+
+         ipv6(2)     The IPv6 protocol as defined in RFC 2460.
+
+         Note that this textual convention SHOULD NOT be used to
+         distinguish different address types associated with IP
+         protocols.  The InetAddressType has been designed for this
+         purpose."
+    REFERENCE   "RFC 791, RFC 2460"
+    SYNTAX       INTEGER {
+                     unknown(0),
+                     ipv4(1),
+                     ipv6(2)
+                 }
+END
diff --git a/snmp_builder/mibs/INTEGRATED-SERVICES-GUARANTEED-MIB.mib b/snmp_builder/mibs/INTEGRATED-SERVICES-GUARANTEED-MIB.mib
new file mode 100644
index 0000000..a07ec2a
--- /dev/null
+++ b/snmp_builder/mibs/INTEGRATED-SERVICES-GUARANTEED-MIB.mib
@@ -0,0 +1,218 @@
+INTEGRATED-SERVICES-GUARANTEED-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+            MODULE-IDENTITY, OBJECT-TYPE             FROM SNMPv2-SMI
+            RowStatus                                FROM SNMPv2-TC
+            MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+            intSrv                        FROM INTEGRATED-SERVICES-MIB
+            ifIndex                                  FROM IF-MIB;
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in [9].
+
+intSrvGuaranteed MODULE-IDENTITY
+        LAST-UPDATED "9511030500Z" -- Thu Aug 28 09:04:22 PDT 1997
+        ORGANIZATION "IETF Integrated Services Working Group"
+        CONTACT-INFO
+       "       Fred Baker
+       Postal: Cisco Systems
+               519 Lado Drive
+               Santa Barbara, California 93111
+       Tel:    +1 805 681 0115
+       E-Mail: fred@cisco.com"
+    DESCRIPTION
+       "The MIB module to describe the Guaranteed Service of
+       the Integrated Services Protocol"
+    ::= { intSrv 5 }
+
+intSrvGuaranteedObjects          OBJECT IDENTIFIER
+                                 ::= { intSrvGuaranteed 1 }
+intSrvGuaranteedNotifications    OBJECT IDENTIFIER
+                                 ::= { intSrvGuaranteed 2 }
+intSrvGuaranteedConformance      OBJECT IDENTIFIER
+                                 ::= { intSrvGuaranteed 3 }
+
+--      The Integrated Services Interface Attributes Database
+--      contains information that is shared with other reservation
+--      procedures such as ST-II.
+
+    intSrvGuaranteedIfTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IntSrvGuaranteedIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The attributes of the system's interfaces  ex-
+           ported by the Guaranteed Service."
+       ::= { intSrvGuaranteedObjects 1 }
+
+    intSrvGuaranteedIfEntry OBJECT-TYPE
+        SYNTAX      IntSrvGuaranteedIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The reservable attributes of  a  given  inter-
+           face."
+       INDEX { ifIndex }
+       ::= { intSrvGuaranteedIfTable 1 }
+
+IntSrvGuaranteedIfEntry ::=
+    SEQUENCE {
+        intSrvGuaranteedIfBacklog INTEGER,
+        intSrvGuaranteedIfDelay   INTEGER,
+        intSrvGuaranteedIfSlack   INTEGER,
+        intSrvGuaranteedIfStatus  RowStatus
+    }
+
+    intSrvGuaranteedIfBacklog OBJECT-TYPE
+        SYNTAX      INTEGER (0..'0FFFFFFF'h)
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Backlog  parameter  is  the  data  backlog
+           resulting  from  the vagaries of how a specific
+           implementation deviates from a  strict  bit-by-
+           bit  service.  So, for instance, for packetized
+           weighted fair queueing, Backlog is set  to  the
+           Maximum Packet Size.
+
+           The Backlog term is measured in units of bytes.
+           An  individual  element can advertise a Backlog
+           value between 1 and 2**28 (a  little  over  250
+           megabytes)  and  the  total added over all ele-
+           ments can range as high as  (2**32)-1.   Should
+           the  sum of the different elements delay exceed
+           (2**32)-1, the end-to-end error term should  be
+           (2**32)-1."
+       ::= { intSrvGuaranteedIfEntry 1 }
+
+    intSrvGuaranteedIfDelay OBJECT-TYPE
+        SYNTAX      INTEGER (0..'0FFFFFFF'h)
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Delay parameter at  each  service  element
+           should  be  set  to the maximum packet transfer
+           delay (independent of bucket size) through  the
+           service  element.   For  instance,  in a simple
+           router, one might compute the worst case amount
+           of  time  it  make  take  for a datagram to get
+           through the input interface to  the  processor,
+           and how long it would take to get from the pro-
+           cessor to the outbound interface (assuming  the
+           queueing  schemes work correctly).  For an Eth-
+           ernet, it might represent the worst case  delay
+           if  the maximum number of collisions is experi-
+           enced.
+
+           The Delay term is measured in units of one  mi-
+           crosecond.  An individual element can advertise
+           a delay value between  1  and  2**28  (somewhat
+           over two minutes) and the total delay added all
+           elements  can  range  as  high  as   (2**32)-1.
+           Should  the sum of the different elements delay
+           exceed (2**32)-1, the end-to-end  delay  should
+           be (2**32)-1."
+       ::= { intSrvGuaranteedIfEntry 2 }
+
+    intSrvGuaranteedIfSlack OBJECT-TYPE
+        SYNTAX      INTEGER (0..'0FFFFFFF'h)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If a network element uses a certain amount  of
+           slack,  Si,  to  reduce the amount of resources
+           that it has reserved for a particular flow,  i,
+           the  value  Si  should be stored at the network
+           element.   Subsequently,  if  reservation   re-
+           freshes  are  received  for flow i, the network
+           element must use the same slack Si without  any
+           further computation. This guarantees consisten-
+           cy in the reservation process.
+
+           As an example for the use of  the  slack  term,
+           consider the case where the required end-to-end
+           delay, Dreq, is larger than the  maximum  delay
+           of the fluid flow system.  In this, Ctot is the
+
+           sum of the Backlog terms end to end,  and  Dtot
+           is the sum of the delay terms end to end.  Dreq
+           is obtained by setting R=r in the  fluid  delay
+           formula, and is given by
+
+                        b/r + Ctot/r + Dtot.
+
+           In this case the slack term is
+
+                  S = Dreq - (b/r + Ctot/r + Dtot).
+
+           The slack term may be used by the network  ele-
+           ments  to  adjust  their local reservations, so
+           that they can admit flows that would  otherwise
+           have been rejected. A service element at an in-
+           termediate network element that can  internally
+           differentiate between delay and rate guarantees
+           can now take advantage of this  information  to
+           lower the amount of resources allocated to this
+           flow. For example, by taking an amount of slack
+           s  <= S, an RCSD scheduler [5] can increase the
+           local delay bound, d, assigned to the flow,  to
+           d+s. Given an RSpec, (Rin, Sin), it would do so
+           by setting Rout = Rin and Sout = Sin - s.
+
+           Similarly,  a  network  element  using  a   WFQ
+           scheduler  can  decrease  its local reservation
+           from Rin to Rout by using some of the slack  in
+           the  RSpec.  This  can be accomplished by using
+           the transformation rules given in the  previous
+           section,  that ensure that the reduced reserva-
+           tion level will not increase the  overall  end-
+           to-end delay."
+       ::= { intSrvGuaranteedIfEntry 3 }
+
+    intSrvGuaranteedIfStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'valid' on interfaces that are configured  for
+           the Guaranteed Service."
+       ::= { intSrvGuaranteedIfEntry 4 }
+
+--      No notifications are currently defined
+
+-- conformance information
+
+intSrvGuaranteedGroups      OBJECT IDENTIFIER
+                            ::= { intSrvGuaranteedConformance 1 }
+intSrvGuaranteedCompliances OBJECT IDENTIFIER
+                            ::= { intSrvGuaranteedConformance 2 }
+
+-- compliance statements
+
+    intSrvGuaranteedCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+           "The compliance statement "
+       MODULE  -- this module
+       MANDATORY-GROUPS {
+           intSrvGuaranteedIfAttribGroup
+           }
+       ::= { intSrvGuaranteedCompliances 1 }
+
+    intSrvGuaranteedIfAttribGroup OBJECT-GROUP
+         OBJECTS {
+            intSrvGuaranteedIfBacklog,
+            intSrvGuaranteedIfDelay,
+            intSrvGuaranteedIfSlack,
+            intSrvGuaranteedIfStatus
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required  for  Systems  sup-
+           porting the Guaranteed Service of the Integrat-
+           ed Services Architecture."
+       ::= { intSrvGuaranteedGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/INTEGRATED-SERVICES-MIB.mib b/snmp_builder/mibs/INTEGRATED-SERVICES-MIB.mib
new file mode 100644
index 0000000..e4b505d
--- /dev/null
+++ b/snmp_builder/mibs/INTEGRATED-SERVICES-MIB.mib
@@ -0,0 +1,750 @@
+INTEGRATED-SERVICES-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+            MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+            Gauge32, Integer32, mib-2                FROM SNMPv2-SMI
+            TimeInterval, TEXTUAL-CONVENTION, RowStatus,
+            TruthValue                               FROM SNMPv2-TC
+            MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+            ifIndex, InterfaceIndex                  FROM IF-MIB;
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in [9].
+
+intSrv MODULE-IDENTITY
+        LAST-UPDATED "9511030500Z" -- Thu Aug 28 09:04:13 PDT 1997
+        ORGANIZATION "IETF Integrated Services Working Group"
+        CONTACT-INFO
+       "       Fred Baker
+       Postal: Cisco Systems
+               519 Lado Drive
+               Santa Barbara, California 93111
+       Tel:    +1 805 681 0115
+       E-Mail: fred@cisco.com
+
+               John Krawczyk
+       Postal: ArrowPoint Communications
+               235 Littleton Road
+               Westford, Massachusetts 01886
+       Tel:    +1 508 692 5875
+       E-Mail: jjk@tiac.net"
+    DESCRIPTION
+       "The MIB module to describe the Integrated Services
+
+       Protocol"
+    ::= { mib-2 52 }
+
+intSrvObjects          OBJECT IDENTIFIER ::= { intSrv 1 }
+intSrvGenObjects       OBJECT IDENTIFIER ::= { intSrv 2 }
+intSrvNotifications    OBJECT IDENTIFIER ::= { intSrv 3 }
+intSrvConformance      OBJECT IDENTIFIER ::= { intSrv 4 }
+
+-- Textual Conventions
+--
+
+    SessionNumber ::= TEXTUAL-CONVENTION
+        STATUS   current
+        DESCRIPTION
+           "The Session  Number  convention  is  used  for
+           numbers  identifying  sessions or saved PATH or
+           RESV information. It is a number in  the  range
+           returned  by  a TestAndIncr variable, having no
+           protocol meaning whatsoever but serving instead
+           as simple identifier.
+
+           The alternative was a very complex instance  or
+           instance object that became unwieldy."
+       SYNTAX   INTEGER (0..2147483647)
+
+    Protocol ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS   current
+        DESCRIPTION
+           "The value of the IP Protocol field  of  an  IP
+           Datagram  Header.  This identifies the protocol
+           layer above IP.  For example, the  value  6  is
+           used  for TCP and the value 17 is used for UDP.
+           The values of this field are defined in the As-
+           signed Numbers RFC."
+       SYNTAX   INTEGER (1..255)
+
+    SessionType ::= TEXTUAL-CONVENTION
+        STATUS   current
+        DESCRIPTION
+           "The value of the C-Type field of a Session ob-
+           ject,  as  defined  in  the RSVP specification.
+           This value  determines  the  lengths  of  octet
+           strings  and use of certain objects such as the
+           'port' variables. If the C-Type  calls  for  an
+           IP6  address, one would expect all source, des-
+
+           tination, and next/previous hop addresses to be
+           16  bytes long, and for the ports to be UDP/TCP
+           port numbers, for example."
+       SYNTAX   INTEGER (1..255)
+
+    Port ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS   current
+        DESCRIPTION
+           "The value of the UDP or TCP Source or Destina-
+           tion  Port field, a virtual destination port or
+           generalized port identifier used with the IPSEC
+           Authentication Header or Encapsulating Security
+           Payload, or other session discriminator.  If it
+           is  not  used, the value should be of length 0.
+           This pair, when coupled with the  IP  Addresses
+           of the source and destination system and the IP
+           protocol  field,  uniquely  identifies  a  data
+           stream."
+       SYNTAX   OCTET STRING (SIZE(2..4))
+
+    MessageSize ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS   current
+        DESCRIPTION
+           "The size of a message in bytes. This  is  used
+           to  specify  the  minimum and maximum size of a
+           message along an integrated services route."
+       SYNTAX   INTEGER (0..'7FFFFFFF'h)
+
+    BitRate ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS   current
+        DESCRIPTION
+           "The rate, in bits/second, that data  may  move
+           in  the context.  Applicable contexts minimally
+           include the speed of an  interface  or  virtual
+           circuit, the data rate of a (potentially aggre-
+           gated) data flow, or the data rate to be  allo-
+           cated for use by a flow."
+       SYNTAX   INTEGER (0..'7FFFFFFF'h)
+
+    BurstSize ::= TEXTUAL-CONVENTION
+         DISPLAY-HINT "d"
+         STATUS   current
+         DESCRIPTION
+           "The number of octets of IP Data, including  IP
+           Headers, that a stream may send without concern
+           for policing."
+        SYNTAX   INTEGER (0..'7FFFFFFF'h)
+
+    QosService ::= TEXTUAL-CONVENTION
+         STATUS   current
+         DESCRIPTION
+           "The class of service in use by a flow."
+        SYNTAX   INTEGER {
+                   bestEffort (1),         -- Best Effort Service
+                   guaranteedDelay (2),    -- Guaranteed Delay
+                   controlledLoad (5)      -- Controlled Load
+                 }
+
+--      The Integrated Services Interface Attributes Database contains
+--      information about resources allocated by resource reservation
+--      protocols, such as RSVP and ST-II.
+
+    intSrvIfAttribTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IntSrvIfAttribEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The reservable attributes of the system's  in-
+           terfaces."
+       ::= { intSrvObjects 1 }
+
+    intSrvIfAttribEntry OBJECT-TYPE
+        SYNTAX      IntSrvIfAttribEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The reservable attributes of  a  given  inter-
+           face."
+       INDEX { ifIndex }
+       ::= { intSrvIfAttribTable 1 }
+
+IntSrvIfAttribEntry ::=
+    SEQUENCE {
+        intSrvIfAttribAllocatedBits     BitRate,
+        intSrvIfAttribMaxAllocatedBits  BitRate,
+        intSrvIfAttribAllocatedBuffer   BurstSize,
+        intSrvIfAttribFlows             Gauge32,
+        intSrvIfAttribPropagationDelay  Integer32,
+        intSrvIfAttribStatus            RowStatus
+    }
+
+    intSrvIfAttribAllocatedBits OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "Bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of bits/second currently  allocated
+           to reserved sessions on the interface."
+       ::= { intSrvIfAttribEntry 1 }
+
+    intSrvIfAttribMaxAllocatedBits OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "Bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The maximum number of bits/second that may  be
+           allocated  to  reserved  sessions on the inter-
+           face."
+       ::= { intSrvIfAttribEntry 2 }
+
+    intSrvIfAttribAllocatedBuffer OBJECT-TYPE
+        SYNTAX      BurstSize
+        UNITS       "Bytes"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The amount of buffer space  required  to  hold
+           the simultaneous burst of all reserved flows on
+           the interface."
+       ::= { intSrvIfAttribEntry 3 }
+
+    intSrvIfAttribFlows OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of reserved flows currently  active
+           on  this  interface.  A flow can be created ei-
+           ther from a reservation protocol (such as  RSVP
+           or ST-II) or via configuration information."
+       ::= { intSrvIfAttribEntry 4 }
+
+    intSrvIfAttribPropagationDelay OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The amount of propagation delay that this  in-
+           terface  introduces  in addition to that intro-
+           diced by bit propagation delays."
+       DEFVAL { 0 }-- by default, interfaces are presumed to add
+                   -- no extra delays
+       ::= { intSrvIfAttribEntry 5 }
+
+    intSrvIfAttribStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'active' on interfaces that are configured for
+           RSVP."
+       ::= { intSrvIfAttribEntry 6 }
+
+--      The Integrated Services Active Flows Database
+--      lists all flows active on an outgoing interface, including
+--      relevant attributes.
+
+    intSrvFlowTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IntSrvFlowEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the reserved flows  us-
+           ing the system's interfaces."
+       ::= { intSrvObjects 2 }
+
+    intSrvFlowEntry OBJECT-TYPE
+        SYNTAX      IntSrvFlowEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the use of a given  in-
+           terface   by   a   given   flow.   The  counter
+           intSrvFlowPoliced starts counting  at  the  in-
+           stallation of the flow."
+       INDEX { intSrvFlowNumber }
+       ::= { intSrvFlowTable 1 }
+
+    IntSrvFlowEntry ::=
+        SEQUENCE {
+            intSrvFlowNumber                  SessionNumber,
+            intSrvFlowType                    SessionType,
+            intSrvFlowOwner                   INTEGER,
+            intSrvFlowDestAddr                OCTET STRING,
+            intSrvFlowSenderAddr              OCTET STRING,
+            intSrvFlowDestAddrLength          INTEGER,
+            intSrvFlowSenderAddrLength        INTEGER,
+            intSrvFlowProtocol                Protocol,
+            intSrvFlowDestPort                Port,
+            intSrvFlowPort                    Port,
+            intSrvFlowFlowId                  INTEGER,
+            intSrvFlowInterface               InterfaceIndex,
+            intSrvFlowIfAddr                  OCTET STRING,
+            intSrvFlowRate                    BitRate,
+            intSrvFlowBurst                   BurstSize,
+            intSrvFlowWeight                  Integer32,
+            intSrvFlowQueue                   Integer32,
+            intSrvFlowMinTU                   MessageSize,
+            intSrvFlowMaxTU                   MessageSize,
+            intSrvFlowBestEffort              Counter32,
+            intSrvFlowPoliced                 Counter32,
+            intSrvFlowDiscard                 TruthValue,
+            intSrvFlowService                 QosService,
+            intSrvFlowOrder                   INTEGER,
+            intSrvFlowStatus                  RowStatus
+        }
+
+    intSrvFlowNumber OBJECT-TYPE
+        SYNTAX      SessionNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The number of this flow.  This is for SNMP In-
+           dexing purposes only and has no relation to any
+           protocol value."
+       ::= { intSrvFlowEntry 1 }
+
+    intSrvFlowType OBJECT-TYPE
+        SYNTAX      SessionType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The type of session (IP4, IP6, IP6  with  flow
+           information, etc)."
+       ::= { intSrvFlowEntry 2 }
+
+    intSrvFlowOwner OBJECT-TYPE
+        SYNTAX      INTEGER {
+                         other(1),
+                         rsvp(2),
+                         management(3)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The process that installed this  flow  in  the
+           queue policy database."
+       ::= { intSrvFlowEntry 3 }
+
+    intSrvFlowDestAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The destination address used by all senders in
+           this  session.   This object may not be changed
+           when the value of the RowStatus object is  'ac-
+           tive'."
+       ::= { intSrvFlowEntry 4 }
+
+    intSrvFlowSenderAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The source address of the sender  selected  by
+           this  reservation.  The value of all zeroes in-
+           dicates 'all senders'.  This object may not  be
+           changed  when the value of the RowStatus object
+           is 'active'."
+       ::= { intSrvFlowEntry 5 }
+
+    intSrvFlowDestAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The length of the destination address in bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { intSrvFlowEntry 6 }
+
+    intSrvFlowSenderAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The length of the sender's  address  in  bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+               ::= { intSrvFlowEntry 7 }
+
+    intSrvFlowProtocol OBJECT-TYPE
+        SYNTAX      Protocol
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The IP Protocol used by a session.   This  ob-
+           ject  may  not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { intSrvFlowEntry 8 }
+
+    intSrvFlowDestPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used as a  destina-
+           tion  port for all senders in this session.  If
+           the  IP   protocol   in   use,   specified   by
+           intSrvResvFwdProtocol,  is 50 (ESP) or 51 (AH),
+           this  represents  a  virtual  destination  port
+           number.   A value of zero indicates that the IP
+           protocol in use does not have ports.  This  ob-
+           ject  may  not be changed when the value of the
+
+           RowStatus object is 'active'."
+       ::= { intSrvFlowEntry 9 }
+
+    intSrvFlowPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used  as  a  source
+           port  for  this sender in this session.  If the
+           IP    protocol    in    use,    specified    by
+           intSrvResvFwdProtocol  is  50 (ESP) or 51 (AH),
+           this represents a generalized  port  identifier
+           (GPI).   A  value of zero indicates that the IP
+           protocol in use does not have ports.  This  ob-
+           ject  may  not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { intSrvFlowEntry 10 }
+
+    intSrvFlowFlowId OBJECT-TYPE
+        SYNTAX      INTEGER (0..16777215)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The flow ID that  this  sender  is  using,  if
+           this  is  an IPv6 session."
+       ::= { intSrvFlowEntry 11 }
+
+    intSrvFlowInterface OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The ifIndex value of the  interface  on  which
+           this reservation exists."
+       ::= { intSrvFlowEntry 12 }
+
+    intSrvFlowIfAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The IP Address on the ifEntry  on  which  this
+           reservation  exists.  This is present primarily
+
+           to support those interfaces which layer  multi-
+           ple IP Addresses on the interface."
+       ::= { intSrvFlowEntry 13 }
+
+    intSrvFlowRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Reserved Rate of the sender's data stream.
+           If this is a Controlled Load service flow, this
+           rate is derived from the Tspec  rate  parameter
+           (r).   If  this  is  a Guaranteed service flow,
+           this rate is derived from  the  Rspec  clearing
+           rate parameter (R)."
+       ::= { intSrvFlowEntry 14 }
+
+    intSrvFlowBurst OBJECT-TYPE
+        SYNTAX      BurstSize
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The size of the largest  burst  expected  from
+           the sender at a time.
+
+           If this is less than  the  sender's  advertised
+           burst  size, the receiver is asking the network
+           to provide flow pacing  beyond  what  would  be
+           provided  under normal circumstances. Such pac-
+           ing is at the network's option."
+       ::= { intSrvFlowEntry 15 }
+
+    intSrvFlowWeight OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The weight used  to  prioritize  the  traffic.
+           Note  that the interpretation of this object is
+           implementation-specific,   as   implementations
+           vary in their use of weighting procedures."
+       ::= { intSrvFlowEntry 16 }
+
+    intSrvFlowQueue OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The number of the queue used by this  traffic.
+           Note  that the interpretation of this object is
+           implementation-specific,   as   implementations
+           vary in their use of queue identifiers."
+       ::= { intSrvFlowEntry 17 }
+
+    intSrvFlowMinTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The minimum message size for  this  flow.  The
+           policing  algorithm will treat smaller messages
+           as though they are this size."
+       ::= { intSrvFlowEntry 18 }
+
+    intSrvFlowMaxTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The maximum datagram size for this  flow  that
+           will conform to the traffic specification. This
+           value cannot exceed the MTU of the interface."
+       ::= { intSrvFlowEntry 19 }
+
+    intSrvFlowBestEffort OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of packets that  were  remanded  to
+           best effort service."
+       ::= { intSrvFlowEntry 20 }
+
+    intSrvFlowPoliced OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of packets policed since the incep-
+           tion of the flow's service."
+       ::= { intSrvFlowEntry 21 }
+
+    intSrvFlowDiscard OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If 'true', the flow  is  to  incur  loss  when
+           traffic is policed.  If 'false', policed traff-
+           ic is treated as best effort traffic."
+       DEFVAL { false } -- traffic is, by default, treated as best
+                        -- effort
+       ::= { intSrvFlowEntry 22 }
+
+    intSrvFlowService OBJECT-TYPE
+        SYNTAX      QosService
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The QoS service being applied to this flow."
+       ::= { intSrvFlowEntry 23 }
+
+    intSrvFlowOrder OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "In the event of ambiguity, the order in  which
+           the  classifier  should  make  its comparisons.
+           The row with intSrvFlowOrder=0 is tried  first,
+           and  comparisons  proceed  in  the order of in-
+           creasing value.  Non-serial implementations  of
+           the classifier should emulate this behavior."
+       ::= { intSrvFlowEntry 24 }
+
+    intSrvFlowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'active' for all active  flows.   This  object
+
+           may be used to install static classifier infor-
+           mation, delete classifier information,  or  au-
+           thorize such."
+       ::= { intSrvFlowEntry 25 }
+
+    intSrvFlowNewIndex OBJECT-TYPE
+        SYNTAX      TestAndIncr
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+           "This  object  is  used  to  assign  values  to
+           intSrvFlowNumber  as described in 'Textual Con-
+           ventions  for  SNMPv2'.   The  network  manager
+           reads  the  object,  and  then writes the value
+           back in the SET that creates a new instance  of
+           intSrvFlowEntry.   If  the  SET  fails with the
+           code 'inconsistentValue', then the process must
+           be  repeated; If the SET succeeds, then the ob-
+           ject is incremented, and the  new  instance  is
+           created according to the manager's directions."
+       ::= { intSrvGenObjects 1 }
+
+-- conformance information
+
+intSrvGroups      OBJECT IDENTIFIER ::= { intSrvConformance 1 }
+intSrvCompliances OBJECT IDENTIFIER ::= { intSrvConformance 2 }
+
+-- compliance statements
+
+    intSrvCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+           "The compliance statement "
+       MODULE  -- this module
+       MANDATORY-GROUPS { intSrvIfAttribGroup, intSrvFlowsGroup }
+
+       OBJECT       intSrvFlowType
+         MIN-ACCESS read-only
+         DESCRIPTION
+          "read-create access is not required. This may be
+          read-only."
+
+      OBJECT       intSrvFlowOwner
+        MIN-ACCESS read-only
+        DESCRIPTION
+         "read-create access is not required. This may  be
+         read-only."
+
+     OBJECT       intSrvFlowDestAddr
+       MIN-ACCESS read-only
+       DESCRIPTION
+        "read-create access is not required. This  may  be
+        read-only."
+
+    OBJECT       intSrvFlowSenderAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowDestAddrLength
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowSenderAddrLength
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowProtocol
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowDestPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowFlowId
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This object is needed only in a system that imple-
+       ments IPv6."
+
+    OBJECT       intSrvFlowInterface
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowRate
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowBurst
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowWeight
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowQueue
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowMinTU
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowMaxTU
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       intSrvFlowStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+    ::= { intSrvCompliances 1 }
+
+    intSrvIfAttribGroup OBJECT-GROUP
+         OBJECTS {
+            intSrvIfAttribAllocatedBits, intSrvIfAttribMaxAllocatedBits,
+            intSrvIfAttribAllocatedBuffer, intSrvIfAttribFlows,
+            intSrvIfAttribPropagationDelay, intSrvIfAttribStatus
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required  for  Systems  sup-
+           porting the Integrated Services Architecture."
+       ::= { intSrvGroups 1 }
+
+    intSrvFlowsGroup OBJECT-GROUP
+         OBJECTS {
+            intSrvFlowType, intSrvFlowOwner, intSrvFlowDestAddr,
+            intSrvFlowSenderAddr, intSrvFlowDestAddrLength,
+            intSrvFlowSenderAddrLength, intSrvFlowProtocol,
+            intSrvFlowDestPort, intSrvFlowPort, intSrvFlowInterface,
+            intSrvFlowBestEffort, intSrvFlowRate, intSrvFlowBurst,
+            intSrvFlowWeight, intSrvFlowQueue, intSrvFlowMinTU,
+            intSrvFlowDiscard, intSrvFlowPoliced, intSrvFlowService,
+            intSrvFlowIfAddr, intSrvFlowOrder, intSrvFlowStatus
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required  for  Systems  sup-
+           porting the Integrated Services Architecture."
+       ::= { intSrvGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/INTERFACETOPN-MIB.mib b/snmp_builder/mibs/INTERFACETOPN-MIB.mib
new file mode 100644
index 0000000..6d65d7c
--- /dev/null
+++ b/snmp_builder/mibs/INTERFACETOPN-MIB.mib
@@ -0,0 +1,1023 @@
+INTERFACETOPN-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32
+                FROM SNMPv2-SMI
+        RowStatus, TimeStamp, TruthValue
+                FROM SNMPv2-TC
+        rmon, OwnerString
+                FROM RMON-MIB
+        CounterBasedGauge64
+                FROM HCNUM-TC
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF;
+
+   interfaceTopNMIB MODULE-IDENTITY
+        LAST-UPDATED "200103270000Z"
+        ORGANIZATION "IETF RMON MIB Working Group"
+        CONTACT-INFO
+        "
+
+                Dan Romascanu
+                Avaya Inc.
+                Tel:  +972-3-645-8414
+                Email: dromasca@avaya.com"
+       DESCRIPTION
+          "The MIB module for sorting device interfaces for RMON and
+          SMON monitoring in a multiple device implementation."
+      ::= { rmon 27 }
+interfaceTopNObjects       OBJECT IDENTIFIER ::= { interfaceTopNMIB 1 }
+interfaceTopNNotifications OBJECT IDENTIFIER ::= { interfaceTopNMIB 2 }
+interfaceTopNConformance   OBJECT IDENTIFIER ::= { interfaceTopNMIB 3 }
+
+-- The Interface Top N group is used to prepare reports that
+-- describe a list of interfaces (data sources)
+-- ordered by the values of one
+-- of the objects that apply to the interfaces of the respective device.
+-- Those objects are defined by standard MIBs. The exact objects that
+-- are supported by the agent are described by interfaceTopNCaps
+-- The objects must be elements in tables indexed only by an
+-- InterfaceIndex object.
+-- The objects  chosen by the
+
+-- management station may be sampled over a management
+-- station-specified time interval, making the report rate based.
+-- The management station also specifies the number of interfaces
+-- that are reported.
+--
+-- The interfaceTopNControlTable is used to initiate the generation
+-- of a report.  The management station may select the parameters
+-- of such a report, such as which object, how
+-- many interfaces, and the start & stop times of the sampling.  When
+-- the report is prepared, entries are created in the
+-- interfaceTopNTable associated with the relevant
+-- interfaceTopNControlEntry.  These entries are static for
+-- each report after it has been prepared.
+
+interfaceTopNCaps   OBJECT-TYPE
+    SYNTAX      BITS {
+               ifInOctets(0),
+               ifInUcastPkts(1),
+               ifInNUcastPkts(2),
+               ifInDiscards(3),
+               ifInErrors(4),
+               ifInUnknownProtos(5),
+               ifOutOctets(6),
+               ifOutUcastPkts(7),
+               ifOutNUcastPkts(8),
+               ifOutDiscards(9),
+               ifOutErrors(10),
+               ifInMulticastPkts(11),
+               ifInBroadcastPkts(12),
+               ifOutMulticastPkts(13),
+               ifOutBroadcastPkts(14),
+               ifHCInOctets(15),
+               ifHCInUcastPkts(16),
+               ifHCInMulticastPkts(17),
+               ifHCInBroadcastPkts(18),
+               ifHCOutOctets(19),
+               ifHCOutUcastPkts(20),
+               ifHCOutMulticastPkts(21),
+               ifHCOutBroadcastPkts(22),
+               dot3StatsAlignmentErrors(23),
+               dot3StatsFCSErrors(24),
+               dot3StatsSingleCollisionFrames(25),
+               dot3StatsMultipleCollisionFrames(26),
+               dot3StatsSQETestErrors(27),
+               dot3StatsDeferredTransmissions(28),
+               dot3StatsLateCollisions(29),
+               dot3StatsExcessiveCollisions(30),
+               dot3StatsInternalMacTxErrors(31),
+               dot3StatsCarrierSenseErrors(32),
+               dot3StatsFrameTooLongs(33),
+               dot3StatsInternalMacRxErrors(34),
+               dot3StatsSymbolErrors(35),
+               dot3InPauseFrames(36),
+               dot3OutPauseFrames(37),
+               dot5StatsLineErrors(38),
+               dot5StatsBurstErrors(39),
+               dot5StatsACErrors(40),
+               dot5StatsAbortTransErrors(41),
+               dot5StatsInternalErrors(42),
+               dot5StatsLostFrameErrors(43),
+               dot5StatsReceiveCongestions(44),
+               dot5StatsFrameCopiedErrors(45),
+               dot5StatsTokenErrors(46),
+               dot5StatsSoftErrors(47),
+               dot5StatsHardErrors(48),
+               dot5StatsSignalLoss(49),
+               dot5StatsTransmitBeacons(50),
+               dot5StatsRecoverys(51),
+               dot5StatsLobeWires(52),
+               dot5StatsRemoves(53),
+               dot5StatsSingles(54),
+               dot5StatsFreqErrors(55),
+               etherStatsDropEvents(56),
+               etherStatsOctets(57),
+               etherStatsPkts(58),
+               etherStatsBroadcastPkts(59),
+               etherStatsMulticastPkts(60),
+               etherStatsCRCAlignErrors(61),
+               etherStatsUndersizePkts(62),
+               etherStatsOversizePkts(63),
+               etherStatsFragments(64),
+               etherStatsJabbers(65),
+               etherStatsCollisions(66),
+               etherStatsPkts64Octets(67),
+               etherStatsPkts65to127Octets(68),
+               etherStatsPkts128to255Octets(69),
+               etherStatsPkts256to511Octets(70),
+               etherStatsPkts512to1023Octets(71),
+               etherStatsPkts1024to1518Octets(72),
+               dot1dTpPortInFrames(73),
+               dot1dTpPortOutFrames(74),
+               dot1dTpPortInDiscards(75)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+"The type(s) of sorting capabilities supported by the agent.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInOctets, as defined in [RFC2863],
+then the 'ifInOctets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInUcastPkts, as defined in [RFC2863],
+then the 'ifInUcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInNUcastPkts, as defined in [RFC2863],
+then the 'ifInNUcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInDiscards, as defined in [RFC2863],
+then the 'ifInDiscards' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInErrors, as defined in [RFC2863],
+then the 'ifInErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInUnknownProtocols, as defined in [RFC2863],
+then the 'ifInUnknownProtocols' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutOctets, as defined in [RFC2863],
+then the 'ifOutOctets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutUcastPackets, as defined in [RFC2863],
+then the 'ifOutUcastPackets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutNUcastPackets, as defined in [RFC2863],
+then the 'ifOutNUcastPackets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutDiscards, as defined in [RFC2863],
+then the 'ifOutDiscards' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutErrors, as defined in [RFC2863],
+then the 'ifOutErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInMulticastPkts, as defined in [RFC2863],
+then the 'ifInMulticastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifInBroadcastPkts, as defined in [RFC2863],
+then the 'ifInBroadcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutMulticastPkts, as defined in [RFC2863],
+then the 'ifOutMulticastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifOutBroadcastPkts, as defined in [RFC2863],
+then the 'ifOutBroadcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCInOctets, as defined in [RFC2863],
+then the 'ifHCInOctets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCInMulticastPkts, as defined in [RFC2863],
+then the 'ifHCInMulticastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCInBroadcastPkts, as defined in [RFC2863],
+then the 'ifHCInBroadcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCOutOctets, as defined in [RFC2863],
+then the 'ifHCOutOctets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCOutUcastPkts, as defined in [RFC2863],
+then the 'ifHCOutUcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCOutMulticastPkts, as defined in [RFC2863],
+then the 'ifHCOutMulticastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of ifHCOutBroadcastPkts, as defined in [RFC2863],
+then the 'ifHCOutBroadcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsAlignmentErrors, as defined in [RFC2665],
+then the 'dot3StatsAlignmentErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsFCSErrors, as defined in [RFC2665],
+then the 'dot3StatsFCSErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsSingleCollisionFrames, as defined in
+[RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will
+be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsSQETestErrors, as defined in [RFC2665],
+then the 'dot3StatsSQETestErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsDeferredTransmissions, as defined in
+[RFC2665], then the 'dot3StatsDeferredTransmissions' bit
+will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsLateCollisions, as defined in [RFC2665],
+then the 'dot3StatsLateCollisions' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsExcessiveCollisions, as defined in [RFC2665],
+then the 'dot3StatsExcessiveCollisions' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsInternalMacTxErrors, as defined in
+[RFC2665],then the 'dot3StatsInternalMacTxErrors' bit
+will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsCarrierSenseErrors, as defined in [RFC2665],
+then the 'dot3StatsCarrierSenseErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsFrameTooLongs, as defined in [RFC2665],
+then the 'dot3StatsFrameTooLongs' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsInternalMacRxErrors, as defined in
+[RFC2665], then the 'dot3StatsInternalMacRxErrors' bit
+will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3StatsSymbolErrors, as defined in [RFC2665],
+then the 'dot3StatsSymbolErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3InPauseFrames, as defined in [RFC2665],
+then the 'dot3InPauseFrames' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot3OutPauseFrames, as defined in [RFC2665],
+then the 'dot3OutPauseFrames' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsLineErrors, as defined in [RFC1748],
+then the 'dot5StatsLineErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsBurstErrors, as defined in [RFC1748],
+then the 'dot5StatsBurstErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsACErrors, as defined in [RFC1748],
+then the 'dot5StatsACErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsAbortTransErrors, as defined in [RFC1748],
+then the 'dot5StatsAbortTransErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsInternalErrors, as defined in [RFC1748],
+then the 'dot5StatsInternalErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsLostFrameErrors, as defined in [RFC1748],
+then the 'dot5StatsLostFrameErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsReceiveCongestionErrors, as defined in
+[RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will
+be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsFrameCopiedErrors, as defined in [RFC1748],
+then the 'dot5StatsFrameCopiedErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsTokenErrors, as defined in [RFC1748],
+then the 'dot5StatsTokenErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsSoftErrors, as defined in [RFC1748],
+then the 'dot5StatsSoftErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+
+values of dot5StatsHardErrors, as defined in [RFC1748],
+then the 'dot5StatsHardErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsSignalLoss, as defined in [RFC1748],
+then the 'dot5StatsSignalLoss' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsTransmitBeacons, as defined in [RFC1748],
+then the 'dot5StatsTransmitBeacons' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsRecoverys, as defined in [RFC1748],
+then the 'dot5StatsRecoverys' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsLobeWires, as defined in [RFC1748],
+then the 'dot5StatsLobeWires' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsRemoves, as defined in [RFC1748],
+then the 'dot5StatsRemoves' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsSingles, as defined in [RFC1748],
+then the 'dot5StatsSingles' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot5StatsFreqErrors, as defined in [RFC1748],
+then the 'dot5StatsFreqErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsDropEvents, as defined in [RFC2819],
+then the 'etherStatsDropEvents' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsOctets, as defined in [RFC2819],
+then the 'etherStatsOctets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsPkts, as defined in [RFC2819],
+then the 'etherStatsPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsBroadcastPkts, as defined in [RFC2819],
+then the 'etherStatsBroadcastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+
+values of etherStatsMulticastPkts, as defined in [RFC2819],
+then the 'etherStatsMulticastPkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsCRCAlignErrors, as defined in [RFC2819],
+then the 'etherStatsCRCAlignErrors' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsUndersizePkts, as defined in [RFC2819],
+then the 'etherStatsUndersizePkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsOversizePkts, as defined in [RFC2819],
+then the 'etherStatsOversizePkts' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsFragments, as defined in [RFC2819],
+then the 'etherStatsFragments' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsJabbers, as defined in [RFC2819],
+then the 'etherStatsJabbers' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsCollisions, as defined in [RFC2819],
+then the 'etherStatsCollisions' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsPkts64Octets, as defined in [RFC2819],
+then the 'etherStatsPkts64Octets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsPkts65to127Octets, as defined in [RFC2819],
+then the 'etherStatsPkts65to127Octets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsPkts128to255Octets, as defined in [RFC2819],
+then the 'etherStatsPkts128to255Octets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsPkts256to511Octets, as defined in [RFC2819],
+then the 'etherStatsPkts256to511Octets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
+then the 'etherStatsPkts512to1023Octets' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+
+values of etherStatsPkts1024to1518Octets, as defined in
+[RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will
+be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot1dTpPortInFrames, as defined in [RFC1493],
+then the 'dot1dTpPortInFrames' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot1dTpPortOutFrames, as defined in [RFC1493],
+then the 'dot1dTpPortOutFrames' bit will be set.
+
+If the agent can perform sorting of interfaces according to the
+values of dot1dTpPortInDiscards, as defined in [RFC1493],
+then the 'dot1dTpPortInDiscards' bit will be set."
+    ::= { interfaceTopNObjects 1 }
+
+  interfaceTopNControlTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF InterfaceTopNControlEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+        "A table of control records for reports on the top `N'
+        interfaces for the value or rate of a selected object.
+        The number of entries depends on the configuration of the agent.
+        The maximum number of entries is implementation
+        dependent."
+     ::= { interfaceTopNObjects 2 }
+
+   interfaceTopNControlEntry OBJECT-TYPE
+       SYNTAX      InterfaceTopNControlEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A set of parameters that control the creation of a
+               report of the top N ports according to several metrics."
+       INDEX    { interfaceTopNControlIndex }
+       ::= { interfaceTopNControlTable 1 }
+
+   InterfaceTopNControlEntry ::= SEQUENCE {
+       interfaceTopNControlIndex
+           Integer32,
+       interfaceTopNObjectVariable
+           INTEGER,
+       interfaceTopNObjectSampleType
+           INTEGER,
+       interfaceTopNNormalizationReq
+           TruthValue,
+       interfaceTopNNormalizationFactor
+           Integer32,
+       interfaceTopNTimeRemaining
+           Integer32,
+       interfaceTopNDuration
+           Integer32,
+       interfaceTopNRequestedSize
+           Integer32,
+       interfaceTopNGrantedSize
+           Integer32,
+       interfaceTopNStartTime
+           TimeStamp,
+       interfaceTopNOwner
+           OwnerString,
+       interfaceTopNLastCompletionTime
+           TimeStamp,
+       interfaceTopNRowStatus
+           RowStatus
+   }
+
+   interfaceTopNControlIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1 .. 65535)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+          "An index that uniquely identifies an entry in the
+          interfaceTopNControl table.  Each such entry defines
+          one top N report prepared for a probe."
+       ::= { interfaceTopNControlEntry 1 }
+
+interfaceTopNObjectVariable OBJECT-TYPE
+    SYNTAX INTEGER   {
+               ifInOctets(0),
+               ifInUcastPkts(1),
+               ifInNUcastPkts(2),
+               ifInDiscards(3),
+               ifInErrors(4),
+               ifInUnknownProtos(5),
+               ifOutOctets(6),
+               ifOutUcastPkts(7),
+               ifOutNUcastPkts(8),
+               ifOutDiscards(9),
+               ifOutErrors(10),
+               ifInMulticastPkts(11),
+               ifInBroadcastPkts(12),
+               ifOutMulticastPkts(13),
+               ifOutBroadcastPkts(14),
+               ifHCInOctets(15),
+               ifHCInUcastPkts(16),
+               ifHCInMulticastPkts(17),
+               ifHCInBroadcastPkts(18),
+               ifHCOutOctets(19),
+               ifHCOutUcastPkts(20),
+               ifHCOutMulticastPkts(21),
+               ifHCOutBroadcastPkts(22),
+               dot3StatsAlignmentErrors(23),
+               dot3StatsFCSErrors(24),
+               dot3StatsSingleCollisionFrames(25),
+               dot3StatsMultipleCollisionFrames(26),
+               dot3StatsSQETestErrors(27),
+               dot3StatsDeferredTransmissions(28),
+               dot3StatsLateCollisions(29),
+               dot3StatsExcessiveCollisions(30),
+               dot3StatsInternalMacTxErrors(31),
+               dot3StatsCarrierSenseErrors(32),
+               dot3StatsFrameTooLongs(33),
+               dot3StatsInternalMacRxErrors(34),
+               dot3StatsSymbolErrors(35),
+               dot3InPauseFrames(36),
+               dot3OutPauseFrames(37),
+               dot5StatsLineErrors(38),
+               dot5StatsBurstErrors(39),
+               dot5StatsACErrors(40),
+               dot5StatsAbortTransErrors(41),
+               dot5StatsInternalErrors(42),
+               dot5StatsLostFrameErrors(43),
+               dot5StatsReceiveCongestions(44),
+               dot5StatsFrameCopiedErrors(45),
+               dot5StatsTokenErrors(46),
+               dot5StatsSoftErrors(47),
+               dot5StatsHardErrors(48),
+               dot5StatsSignalLoss(49),
+               dot5StatsTransmitBeacons(50),
+               dot5StatsRecoverys(51),
+               dot5StatsLobeWires(52),
+               dot5StatsRemoves(53),
+               dot5StatsSingles(54),
+               dot5StatsFreqErrors(55),
+               etherStatsDropEvents(56),
+               etherStatsOctets(57),
+               etherStatsPkts(58),
+               etherStatsBroadcastPkts(59),
+               etherStatsMulticastPkts(60),
+               etherStatsCRCAlignErrors(61),
+               etherStatsUndersizePkts(62),
+               etherStatsOversizePkts(63),
+               etherStatsFragments(64),
+               etherStatsJabbers(65),
+               etherStatsCollisions(66),
+               etherStatsPkts64Octets(67),
+               etherStatsPkts65to127Octets(68),
+               etherStatsPkts128to255Octets(69),
+               etherStatsPkts256to511Octets(70),
+               etherStatsPkts512to1023Octets(71),
+               etherStatsPkts1024to1518Octets(72),
+               dot1dTpPortInFrames(73),
+               dot1dTpPortOutFrames(74),
+               dot1dTpPortInDiscards(75)
+}
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+    "The particular variable to be sampled.
+
+    Values between 0 and 22, point to MIB objects defined in
+    IF-MIB [RFC2863].
+
+    Values between 23 and 37, point to MIB objects defined in
+    EtherLike-MIB [RFC2665].
+
+    Values between 38 and 55, point to MIB objects defined in
+    TOKENRING-MIB [RFC1748].
+
+    Values between 56 and 72, point to MIB objects defined in
+    RMON-MIB [RFC2819].
+
+    Values between 73 and 75, point to MIB objects defined in
+    BRIDGE-MIB [RFC1493].
+
+    Because SNMP access control is articulated entirely in terms
+    of the contents of MIB views, no access control mechanism
+    exists that can restrict the value of this object to identify
+    only those objects that exist in a particular MIB view.
+    Because there is thus no acceptable means of restricting the
+    read access that could be obtained through the TopN
+    mechanism, the probe must only grant write access to this
+    object in those views that have read access to all objects on
+    the probe.
+
+    During a set operation, if the supplied variable name is not
+    available in the selected MIB view, or does not conform the
+    other conditions mentioned above, a badValue error must be
+    returned.
+
+    This object may not be modified if the associated
+    interfaceTopNControlStatus object is equal to active(1)."
+ ::= { interfaceTopNControlEntry 2 }
+
+interfaceTopNObjectSampleType OBJECT-TYPE
+    SYNTAX INTEGER {
+               absoluteValue(1),
+               deltaValue(2),
+               bandwidthPercentage(3)
+           }
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+     "The method of sampling the selected variable for storage in
+     the interfaceTopNTable.
+
+     If the value of this object is absoluteValue(1), the value of
+     the selected variable will be copied directly into the topNValue.
+
+     If the value of this object is deltaValue(2), the value of the
+     selected variable at the last sample will be subtracted from
+     the current value, and the difference will be stored in topNValue.
+
+     If the value of this object is bandwidthPercentage(3), the agent
+     records the total number of octets sent over an interval divided
+     by the total number of octets that represent '100% bandwidth'
+     for that interface. This ratio is multiplied by 1000 to
+     retain a 3 digit integer (0..1000) in units of
+     'tenth of one percent'. This type of computation is accurate for
+     the octet counters. The usage of this option with respect to
+     packets or error counters is not recommended.
+
+     This object may not be modified if the associated
+     interfaceTopNControlStatus object is equal to active(1)."
+  ::= { interfaceTopNControlEntry 3 }
+
+interfaceTopNNormalizationReq OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+    "This object indicates whether  normalization is required in the
+
+    computation of the selected value.
+
+    If the value of this object is 'true', the value of
+    the selected variable will be multiplied by a factor equal to the
+    interfaceTopNNormalizationFactor divided by the value of
+    effective speed of the interface
+
+    If the value of this object is 'false',
+    the value of the selected variable will be taken 'as is' in
+    the TopN computation.
+
+    If the value of the object interfaceTopNSampleType is
+    bandwidthPercentage(3), the object
+    interfaceTopNNormalizationReq cannot take the value 'true'.
+
+    The value of this object MUST be false if the effective speed of
+    the interface sub-layer as determined from ifSpeed is zero. This
+    conforms to the ifSpeed definition in [RFC2863]for a sub-layer
+    that has no concept of bandwidth.
+
+    This object may not be modified if the associated
+    interfaceTopNControlStatus object is equal to active(1)."
+  ::= { interfaceTopNControlEntry 4 }
+
+interfaceTopNNormalizationFactor OBJECT-TYPE
+    SYNTAX Integer32 (1..2147483647)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+    "The value used for normalization if
+    interfaceTopNNormalizationReq has the value 'true'.
+
+ Example:
+  The following set of values is applied to a device with multiple
+  Ethernet interfaces running at 10 Mbps, 100 Mbps, and 1 Gbps.
+  interfaceTopNObjectVariable = 'ifInOctets'
+  interfaceTopNObjectSampleType = 'deltaValue'
+  interfaceTopNNormalizationReq = 'true'
+  interfaceTopNNormalizationFactor = 1000000000
+  Applying this set of values will result in the sampled delta values
+  to be multiplied by 100 for the 10 Mbps interfaces, and by 10 for
+  the 100 Mbps interfaces, while the sample values for the 1 Gbps
+  interface are left unchanged. The effective speed of the interface is
+  taken from the value of ifSpeed for each interface, if ifSpeed is
+  less than 4,294,967,295, or from ifHighSpeed multiplied by
+  1,000,000 otherwise.
+
+  At row creation the agent SHOULD set the value of this object to
+
+  the effective speed of the interface."
+::= { interfaceTopNControlEntry 5 }
+
+interfaceTopNTimeRemaining OBJECT-TYPE
+       SYNTAX      Integer32 (0..2147483647)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+         "The number of seconds left in the report
+         currently being collected.  When this object
+         is modified by the management station, a new
+         collection is started, possibly aborting a
+         currently running report.  The new value is
+         used as the requested duration of this report,
+         which is loaded into the associated
+         interfaceTopNDuration object.
+
+         When this object is set to a non-zero value,
+         any associated interfaceTopNEntries shall be
+         made inaccessible by the agent.  While the value
+         of this object is non-zero, it decrements by one
+         per second until it reaches zero.  During this
+         time, all associated interfaceTopNEntries shall
+         remain inaccessible.  At the time that this object
+         decrements to zero, the report is made accessible
+         in the interfaceTopNTable.  Thus, the interfaceTopN
+         table needs to be created only at the end of the
+         collection interval.
+
+         If the value of this object is set to zero
+         while the associated report is running, the
+         running report is aborted and no associated
+         interfaceTopNEntries are created."
+     DEFVAL { 0 }
+     ::= { interfaceTopNControlEntry 6 }
+
+   interfaceTopNDuration OBJECT-TYPE
+       SYNTAX      Integer32 (0..2147483647)
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "The number of seconds that this report has
+        collected during the last sampling interval,
+        or if this report is currently being collected,
+        the number of seconds that this report is being
+        collected during this sampling interval.
+
+        When the associated interfaceTopNTimeRemaining
+
+        object is set, this object shall be set by the
+        agent to the same value and shall not be modified
+        until the next time the interfaceTopNTimeRemaining
+        is set.
+
+        This value shall be zero if no reports have been
+        requested for this interfaceTopNControlEntry."
+     ::= { interfaceTopNControlEntry 7 }
+
+   interfaceTopNRequestedSize OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+         "The maximum number of interfaces requested
+         for the Top N Table.
+
+         When this object is created or modified, the
+         agent should set interfaceTopNGrantedSize as close
+         to this object as is possible for the particular
+         implementation and available resources."
+       DEFVAL { 10 }
+       ::= { interfaceTopNControlEntry 8 }
+
+   interfaceTopNGrantedSize OBJECT-TYPE
+       SYNTAX      Integer32 (0.. 2147483647)
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+         "The maximum number of interfaces in the
+         top N table.
+
+         When the associated interfaceTopNRequestedSize object is
+         created or modified, the agent should set this object as
+         closely to the requested value as is possible for the
+         particular implementation and available resources.  The
+         agent must not lower this value except as a result of a
+         set to the associated interfaceTopNRequestedSize object."
+     ::= { interfaceTopNControlEntry 9 }
+
+   interfaceTopNStartTime OBJECT-TYPE
+       SYNTAX      TimeStamp
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+       "The value of sysUpTime when this top N report was
+       last started.  In other words, this is the time that
+       the associated interfaceTopNTimeRemaining object was
+
+       modified to start the requested report.
+
+       If the report has not yet been started, the value
+       of this object is zero."
+  ::= { interfaceTopNControlEntry 10 }
+
+   interfaceTopNOwner OBJECT-TYPE
+       SYNTAX      OwnerString
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The entity that configured this entry and is
+               using the resources assigned to it."
+       ::= { interfaceTopNControlEntry 11 }
+
+   interfaceTopNLastCompletionTime OBJECT-TYPE
+       SYNTAX      TimeStamp
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "The value of sysUpTime when this top N report was
+        last completed. If no report was yet completed, the value
+        of this object is zero."
+     ::= { interfaceTopNControlEntry 12 }
+
+   interfaceTopNRowStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+              "The status of this row.
+
+              If the value of this object is not equal to
+              active(1), all associated entries in the
+              interfaceTopNTable shall be deleted by the
+              agent."
+       ::= { interfaceTopNControlEntry 13 }
+
+   -- Interface Top "N" reports
+
+   interfaceTopNTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF InterfaceTopNEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+         "A table of reports for the top `N' ports based on
+
+         setting of associated control table entries. The
+         maximum number of entries depends on the number
+         of entries in table interfaceTopNControlTable and
+         the value of object interfaceTopNGrantedSize for
+         each entry.
+
+         For each entry in the interfaceTopNControlTable,
+         interfaces with the highest value of
+         interfaceTopNValue shall be placed in this table
+         in decreasing order of that rate until there is
+         no more room or until there are no more ports."
+       ::= { interfaceTopNObjects 3 }
+
+   interfaceTopNEntry OBJECT-TYPE
+       SYNTAX      InterfaceTopNEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A set of statistics for an interface that is
+               part of a top N report."
+       INDEX    { interfaceTopNControlIndex,
+                  interfaceTopNIndex }
+       ::= { interfaceTopNTable 1 }
+
+   InterfaceTopNEntry ::= SEQUENCE {
+       interfaceTopNIndex
+           Integer32,
+       interfaceTopNDataSourceIndex
+           Integer32,
+       interfaceTopNValue
+           Gauge32,
+       interfaceTopNValue64
+           CounterBasedGauge64
+   }
+
+   interfaceTopNIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..65535)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+         "An index that uniquely identifies an entry in
+         the interfaceTopN table among those in the same
+         report.  This index is between 1 and N, where N
+         is the number of entries in this report.  Increasing
+         values of interfaceTopNIndex shall be assigned to
+         entries with decreasing values of interfaceTopNValue
+         or interfaceTopNValue64, whichever applies,
+         until index N is assigned to the entry with the
+
+         lowest value of interfaceTopNValue /
+         interfaceTopNValue64 or there are no
+         more interfaceTopNEntries.
+
+         No ports are included in a report where their
+         value of interfaceTopNValue would be zero."
+     ::= { interfaceTopNEntry 1 }
+
+   interfaceTopNDataSourceIndex OBJECT-TYPE
+       SYNTAX      Integer32  (1..2147483647)
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+         "This object identifies the index corresponding
+          to the dataSource for this entry.
+
+          For sorted values of variables belonging to the
+          IF-MIB, EtherLike-MIB or TOKENRING-MIB, this value
+          equals the ifIndex of the interface.
+
+          For sorted values of variables belonging to the
+          RMON-MIB, this value equals the interface corresponding
+          to the data source, pointed to by the value
+          of etherStatsDataSource.
+
+          For sorted values of variables belonging to the
+          BRIDGE-MIB, this value equals the interface corresponding
+          to the bridge port, pointed to by the value
+          of dot1dBasePortIfIndex."
+       ::= { interfaceTopNEntry 2 }
+
+   interfaceTopNValue OBJECT-TYPE
+       SYNTAX      Gauge32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+         "The value at the end of the sampling interval, or
+         the amount of change in the selected variable
+         during this sampling interval for the identified
+         interface.  The selected variable is that interfaces's
+         instance of the object selected by
+         interfaceTopNObjectVariable. This value may be normalized
+         if interfaceTopNNormalization required equals 'true'.
+         This value of this object will be computed for all
+         cases when interfaceTopNObjectVariable points to a
+         32-bit counter or Gauge or when
+         interfaceTopNObjectSampleType equals bandwidthPercentage(3),
+         and will be zero for all other cases."
+       ::= { interfaceTopNEntry 3 }
+
+   interfaceTopNValue64 OBJECT-TYPE
+       SYNTAX      CounterBasedGauge64
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+         "The value at the end of the sampling interval, or
+         the amount of change in the selected variable
+         during this sampling interval for the identified
+         interface.  The selected variable is that interfaces's
+         instance of the object selected by
+         interfaceTopNObjectVariable. This value may be normalized
+         if interfaceTopNNormalization required equals 'true'.
+         This value of this object will be computed for all
+         cases when interfaceTopNObjectVariable points to
+         a 64-bit counter, and will be zero for all other cases."
+       ::= { interfaceTopNEntry 4 }
+
+--
+-- Notifications Section
+-- (none defined)
+--
+
+--
+-- Conformance Section
+--
+
+interfaceTopNCompliances OBJECT IDENTIFIER ::=
+                                           {interfaceTopNConformance 1 }
+interfaceTopNGroups      OBJECT IDENTIFIER ::=
+                                           {interfaceTopNConformance 2 }
+
+interfaceTopNCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "Describes the requirements for conformance to the
+            InterfaceTopN MIB."
+        MODULE  -- this module
+        MANDATORY-GROUPS { interfaceTopNGroup }
+      ::= { interfaceTopNCompliances 1 }
+
+interfaceTopNGroup OBJECT-GROUP
+    OBJECTS {
+       interfaceTopNCaps,
+       interfaceTopNObjectVariable,
+       interfaceTopNObjectSampleType,
+       interfaceTopNNormalizationReq,
+       interfaceTopNNormalizationFactor,
+       interfaceTopNTimeRemaining,
+       interfaceTopNDuration,
+       interfaceTopNRequestedSize,
+       interfaceTopNGrantedSize,
+       interfaceTopNStartTime,
+       interfaceTopNOwner,
+       interfaceTopNLastCompletionTime,
+       interfaceTopNRowStatus,
+       interfaceTopNDataSourceIndex,
+       interfaceTopNValue,
+       interfaceTopNValue64
+    }
+    STATUS  current
+    DESCRIPTION
+         "A collection of objects providing interfaceTopN data for
+         a multiple interfaces device."
+::= { interfaceTopNGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/IP-FORWARD-MIB.mib b/snmp_builder/mibs/IP-FORWARD-MIB.mib
new file mode 100644
index 0000000..347b5e0
--- /dev/null
+++ b/snmp_builder/mibs/IP-FORWARD-MIB.mib
@@ -0,0 +1,1277 @@
+IP-FORWARD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    IpAddress, Integer32, Gauge32,
+    Counter32                          FROM SNMPv2-SMI
+    RowStatus                          FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
+    InterfaceIndexOrZero               FROM IF-MIB
+    ip                                 FROM IP-MIB
+    IANAipRouteProtocol                FROM IANA-RTPROTO-MIB
+    InetAddress, InetAddressType,
+    InetAddressPrefixLength,
+    InetAutonomousSystemNumber         FROM INET-ADDRESS-MIB;
+
+ipForward MODULE-IDENTITY
+    LAST-UPDATED "200602010000Z"
+    ORGANIZATION
+           "IETF IPv6 Working Group
+            http://www.ietf.org/html.charters/ipv6-charter.html"
+    CONTACT-INFO
+           "Editor:
+            Brian Haberman
+            Johns Hopkins University - Applied Physics Laboratory
+            Mailstop 17-S442
+            11100 Johns Hopkins Road
+            Laurel MD,  20723-6099  USA
+
+            Phone: +1-443-778-1319
+            Email: brian@innovationslab.net
+
+            Send comments to <ipv6@ietf.org>"
+    DESCRIPTION
+           "The MIB module for the management of CIDR multipath IP
+            Routes.
+
+            Copyright (C) The Internet Society (2006).  This version
+            of this MIB module is a part of RFC 4292; see the RFC
+            itself for full legal notices."
+
+    REVISION      "200602010000Z"
+    DESCRIPTION
+           "IPv4/v6 version-independent revision.  Minimal changes
+            were made to the original RFC 2096 MIB to allow easy
+            upgrade of existing IPv4 implementations to the
+            version-independent MIB.  These changes include:
+
+            Adding inetCidrRouteDiscards as a replacement for the
+            deprecated ipRoutingDiscards and ipv6DiscardedRoutes
+            objects.
+
+            Adding a new conformance statement to support the
+            implementation of the IP Forwarding MIB in a
+            read-only mode.
+
+            The inetCidrRouteTable replaces the IPv4-specific
+            ipCidrRouteTable, its related objects, and related
+            conformance statements.
+
+            Published as RFC 4292."
+
+    REVISION      "199609190000Z"
+    DESCRIPTION
+           "Revised to support CIDR routes.
+            Published as RFC 2096."
+
+    REVISION      "199207022156Z"
+    DESCRIPTION
+           "Initial version, published as RFC 1354."
+    ::= { ip 24 }
+
+inetCidrRouteNumber OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of current inetCidrRouteTable entries that
+            are not invalid."
+::= { ipForward 6 }
+
+inetCidrRouteDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of valid route entries discarded from the
+            inetCidrRouteTable.  Discarded route entries do not
+            appear in the inetCidrRouteTable.  One possible reason
+            for discarding an entry would be to free-up buffer space
+            for other route table entries."
+    ::= { ipForward 8 }
+
+--  Inet CIDR Route Table
+
+--  The Inet CIDR Route Table deprecates and replaces the
+--  ipCidrRoute Table currently in the IP Forwarding Table MIB.
+--  It adds IP protocol independence.
+
+inetCidrRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF InetCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This entity's IP Routing table."
+    REFERENCE
+           "RFC 1213 Section 6.6, The IP Group"
+    ::= { ipForward 7 }
+
+inetCidrRouteEntry OBJECT-TYPE
+    SYNTAX     InetCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A particular route to a particular destination, under a
+            particular policy (as reflected in the
+            inetCidrRoutePolicy object).
+
+            Dynamically created rows will survive an agent reboot.
+
+            Implementers need to be aware that if the total number
+            of elements (octets or sub-identifiers) in
+            inetCidrRouteDest, inetCidrRoutePolicy, and
+            inetCidrRouteNextHop exceeds 111, then OIDs of column
+            instances in this table will have more than 128 sub-
+            identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    INDEX {
+        inetCidrRouteDestType,
+        inetCidrRouteDest,
+        inetCidrRoutePfxLen,
+        inetCidrRoutePolicy,
+        inetCidrRouteNextHopType,
+        inetCidrRouteNextHop
+        }
+    ::= { inetCidrRouteTable 1 }
+
+InetCidrRouteEntry ::= SEQUENCE {
+        inetCidrRouteDestType     InetAddressType,
+        inetCidrRouteDest         InetAddress,
+        inetCidrRoutePfxLen       InetAddressPrefixLength,
+        inetCidrRoutePolicy       OBJECT IDENTIFIER,
+        inetCidrRouteNextHopType  InetAddressType,
+        inetCidrRouteNextHop      InetAddress,
+        inetCidrRouteIfIndex      InterfaceIndexOrZero,
+        inetCidrRouteType         INTEGER,
+        inetCidrRouteProto        IANAipRouteProtocol,
+        inetCidrRouteAge          Gauge32,
+        inetCidrRouteNextHopAS    InetAutonomousSystemNumber,
+        inetCidrRouteMetric1      Integer32,
+        inetCidrRouteMetric2      Integer32,
+        inetCidrRouteMetric3      Integer32,
+        inetCidrRouteMetric4      Integer32,
+        inetCidrRouteMetric5      Integer32,
+        inetCidrRouteStatus       RowStatus
+    }
+
+inetCidrRouteDestType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The type of the inetCidrRouteDest address, as defined
+            in the InetAddress MIB.
+
+            Only those address types that may appear in an actual
+            routing table are allowed as values of this object."
+    REFERENCE "RFC 4001"
+    ::= { inetCidrRouteEntry 1 }
+
+inetCidrRouteDest OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The destination IP address of this route.
+
+            The type of this address is determined by the value of
+            the inetCidrRouteDestType object.
+
+            The values for the index objects inetCidrRouteDest and
+            inetCidrRoutePfxLen must be consistent.  When the value
+            of inetCidrRouteDest (excluding the zone index, if one
+            is present) is x, then the bitwise logical-AND
+            of x with the value of the mask formed from the
+            corresponding index object inetCidrRoutePfxLen MUST be
+            equal to x.  If not, then the index pair is not
+            consistent and an inconsistentName error must be
+            returned on SET or CREATE requests."
+    ::= { inetCidrRouteEntry 2 }
+
+inetCidrRoutePfxLen OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Indicates the number of leading one bits that form the
+            mask to be logical-ANDed with the destination address
+            before being compared to the value in the
+
+            inetCidrRouteDest field.
+
+            The values for the index objects inetCidrRouteDest and
+            inetCidrRoutePfxLen must be consistent.  When the value
+            of inetCidrRouteDest (excluding the zone index, if one
+            is present) is x, then the bitwise logical-AND
+            of x with the value of the mask formed from the
+            corresponding index object inetCidrRoutePfxLen MUST be
+            equal to x.  If not, then the index pair is not
+            consistent and an inconsistentName error must be
+            returned on SET or CREATE requests."
+    ::= { inetCidrRouteEntry 3 }
+
+inetCidrRoutePolicy OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This object is an opaque object without any defined
+            semantics.  Its purpose is to serve as an additional
+            index that may delineate between multiple entries to
+            the same destination.  The value { 0 0 } shall be used
+            as the default value for this object."
+    ::= { inetCidrRouteEntry 4 }
+
+inetCidrRouteNextHopType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The type of the inetCidrRouteNextHop address, as
+            defined in the InetAddress MIB.
+
+            Value should be set to unknown(0) for non-remote
+            routes.
+
+            Only those address types that may appear in an actual
+            routing table are allowed as values of this object."
+    REFERENCE "RFC 4001"
+    ::= { inetCidrRouteEntry 5 }
+
+inetCidrRouteNextHop OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "On remote routes, the address of the next system en
+
+            route.  For non-remote routes, a zero length string.
+
+            The type of this address is determined by the value of
+            the inetCidrRouteNextHopType object."
+    ::= { inetCidrRouteEntry 6 }
+
+inetCidrRouteIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The ifIndex value that identifies the local interface
+            through which the next hop of this route should be
+            reached.  A value of 0 is valid and represents the
+            scenario where no interface is specified."
+    ::= { inetCidrRouteEntry 7 }
+
+inetCidrRouteType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other    (1), -- not specified by this MIB
+                reject   (2), -- route that discards traffic and
+                              --   returns ICMP notification
+                local    (3), -- local interface
+                remote   (4), -- remote destination
+                blackhole(5)  -- route that discards traffic
+                              --   silently
+             }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The type of route.  Note that local(3) refers to a
+            route for which the next hop is the final destination;
+            remote(4) refers to a route for which the next hop is
+            not the final destination.
+
+            Routes that do not result in traffic forwarding or
+            rejection should not be displayed, even if the
+            implementation keeps them stored internally.
+
+            reject(2) refers to a route that, if matched, discards
+            the message as unreachable and returns a notification
+            (e.g., ICMP error) to the message sender.  This is used
+            in some protocols as a means of correctly aggregating
+            routes.
+
+            blackhole(5) refers to a route that, if matched,
+            discards the message silently."
+    ::= { inetCidrRouteEntry 8 }
+
+inetCidrRouteProto OBJECT-TYPE
+    SYNTAX     IANAipRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The routing mechanism via which this route was learned.
+            Inclusion of values for gateway routing protocols is
+            not intended to imply that hosts should support those
+            protocols."
+    ::= { inetCidrRouteEntry 9 }
+
+inetCidrRouteAge OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of seconds since this route was last updated
+            or otherwise determined to be correct.  Note that no
+            semantics of 'too old' can be implied, except through
+            knowledge of the routing protocol by which the route
+            was learned."
+    ::= { inetCidrRouteEntry 10 }
+
+inetCidrRouteNextHopAS OBJECT-TYPE
+    SYNTAX     InetAutonomousSystemNumber
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The Autonomous System Number of the Next Hop.  The
+            semantics of this object are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  When this object is unknown or not relevant, its
+            value should be set to zero."
+    DEFVAL { 0 }
+    ::= { inetCidrRouteEntry 11 }
+
+inetCidrRouteMetric1 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The primary routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 12 }
+
+inetCidrRouteMetric2 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 13 }
+
+inetCidrRouteMetric3 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 14 }
+
+inetCidrRouteMetric4 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 15 }
+
+inetCidrRouteMetric5 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 16 }
+
+inetCidrRouteStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions.
+
+            A row entry cannot be modified when the status is
+            marked as active(1)."
+    ::= { inetCidrRouteEntry 17 }
+
+--  Conformance information
+
+ipForwardConformance
+     OBJECT IDENTIFIER ::= { ipForward 5 }
+
+ipForwardGroups
+     OBJECT IDENTIFIER ::= { ipForwardConformance 1 }
+
+ipForwardCompliances
+     OBJECT IDENTIFIER ::= { ipForwardConformance 2 }
+
+--  Compliance statements
+
+ipForwardFullCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "When this MIB is implemented for read-create, the
+            implementation can claim full compliance.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2,
+            but for which there are compliance requirements,
+            expressed in OBJECT clause form in this description:
+
+            -- OBJECT      inetCidrRouteDestType
+            -- SYNTAX      InetAddressType (ipv4(1), ipv6(2),
+            --                              ipv4z(3), ipv6z(4))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global ipv4 and ipv6 addresses.
+
+            --
+            -- OBJECT      inetCidrRouteDest
+            -- SYNTAX      InetAddress (SIZE (4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global IPv4 and IPv6 addresses.
+            --
+            -- OBJECT      inetCidrRouteNextHopType
+            -- SYNTAX      InetAddressType (unknown(0), ipv4(1),
+            --                              ipv6(2), ipv4z(3)
+            --                              ipv6z(4))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global ipv4 and ipv6 addresses.
+            --
+            -- OBJECT      inetCidrRouteNextHop
+            -- SYNTAX      InetAddress (SIZE (0 | 4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global IPv4 and IPv6 addresses.
+            "
+
+   MODULE -- this module
+   MANDATORY-GROUPS { inetForwardCidrRouteGroup }
+
+   OBJECT        inetCidrRouteStatus
+   SYNTAX        RowStatus { active(1), notInService (2) }
+   WRITE-SYNTAX  RowStatus { active(1), notInService (2),
+                             createAndGo(4), destroy(6) }
+   DESCRIPTION  "Support for createAndWait is not required."
+   ::= { ipForwardCompliances 3 }
+
+ipForwardReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS     current
+   DESCRIPTION
+           "When this MIB is implemented without support for read-
+            create (i.e., in read-only mode), the implementation can
+            claim read-only compliance."
+   MODULE -- this module
+   MANDATORY-GROUPS { inetForwardCidrRouteGroup }
+
+   OBJECT      inetCidrRouteIfIndex
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteType
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteNextHopAS
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric1
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric2
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric3
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric4
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric5
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteStatus
+   SYNTAX      RowStatus { active(1) }
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+   ::= { ipForwardCompliances 4 }
+
+-- units of conformance
+
+inetForwardCidrRouteGroup OBJECT-GROUP
+    OBJECTS { inetCidrRouteDiscards,
+              inetCidrRouteIfIndex, inetCidrRouteType,
+              inetCidrRouteProto, inetCidrRouteAge,
+              inetCidrRouteNextHopAS, inetCidrRouteMetric1,
+              inetCidrRouteMetric2, inetCidrRouteMetric3,
+              inetCidrRouteMetric4, inetCidrRouteMetric5,
+              inetCidrRouteStatus, inetCidrRouteNumber
+        }
+    STATUS     current
+    DESCRIPTION
+           "The IP version-independent CIDR Route Table."
+    ::= { ipForwardGroups 4 }
+
+--  Deprecated Objects
+
+ipCidrRouteNumber OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of current ipCidrRouteTable entries that are
+            not invalid.  This object is deprecated in favor of
+            inetCidrRouteNumber and the inetCidrRouteTable."
+    ::= { ipForward 3 }
+
+--  IP CIDR Route Table
+
+--  The IP CIDR Route Table obsoletes and replaces the ipRoute
+--  Table current in MIB-I and MIB-II and the IP Forwarding Table.
+--  It adds knowledge of the autonomous system of the next hop,
+--  multiple next hops, policy routing, and Classless
+--  Inter-Domain Routing.
+
+ipCidrRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "This entity's IP Routing table.  This table has been
+            deprecated in favor of the IP version neutral
+            inetCidrRouteTable."
+    REFERENCE
+           "RFC 1213 Section 6.6, The IP Group"
+    ::= { ipForward 4 }
+
+ipCidrRouteEntry OBJECT-TYPE
+    SYNTAX     IpCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "A particular route to a particular destination, under a
+
+            particular policy."
+    INDEX {
+        ipCidrRouteDest,
+        ipCidrRouteMask,
+        ipCidrRouteTos,
+        ipCidrRouteNextHop
+        }
+       ::= { ipCidrRouteTable 1 }
+
+IpCidrRouteEntry ::= SEQUENCE {
+        ipCidrRouteDest       IpAddress,
+        ipCidrRouteMask       IpAddress,
+        ipCidrRouteTos        Integer32,
+        ipCidrRouteNextHop    IpAddress,
+        ipCidrRouteIfIndex    Integer32,
+        ipCidrRouteType       INTEGER,
+        ipCidrRouteProto      INTEGER,
+        ipCidrRouteAge        Integer32,
+        ipCidrRouteInfo       OBJECT IDENTIFIER,
+        ipCidrRouteNextHopAS  Integer32,
+        ipCidrRouteMetric1    Integer32,
+        ipCidrRouteMetric2    Integer32,
+        ipCidrRouteMetric3    Integer32,
+        ipCidrRouteMetric4    Integer32,
+        ipCidrRouteMetric5    Integer32,
+        ipCidrRouteStatus     RowStatus
+    }
+
+ipCidrRouteDest OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The destination IP address of this route.
+
+            This object may not take a Multicast (Class D) address
+            value.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipCidrRouteMask object is
+            not equal to x."
+    ::= { ipCidrRouteEntry 1 }
+
+ipCidrRouteMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "Indicate the mask to be logical-ANDed with the
+            destination address before being compared to the value
+            in the ipCidrRouteDest field.  For those systems that
+            do not support arbitrary subnet masks, an agent
+            constructs the value of the ipCidrRouteMask by
+            reference to the IP Address Class.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipCidrRouteDest object is
+            not equal to ipCidrRouteDest."
+    ::= { ipCidrRouteEntry 2 }
+
+-- The following convention is included for specification
+-- of TOS Field contents.  At this time, the Host Requirements
+-- and the Router Requirements documents disagree on the width
+-- of the TOS field.  This mapping describes the Router
+-- Requirements mapping, and leaves room to widen the TOS field
+-- without impact to fielded systems.
+
+ipCidrRouteTos OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The policy specifier is the IP TOS Field.  The encoding
+            of IP TOS is as specified by the following convention.
+            Zero indicates the default path if no more specific
+            policy applies.
+
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+            |                 |                       |     |
+            |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
+            |                 |                       |     |
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+
+                         IP TOS                IP TOS
+               Field     Policy      Field     Policy
+               Contents    Code      Contents    Code
+               0 0 0 0  ==>   0      0 0 0 1  ==>   2
+               0 0 1 0  ==>   4      0 0 1 1  ==>   6
+               0 1 0 0  ==>   8      0 1 0 1  ==>  10
+               0 1 1 0  ==>  12      0 1 1 1  ==>  14
+               1 0 0 0  ==>  16      1 0 0 1  ==>  18
+               1 0 1 0  ==>  20      1 0 1 1  ==>  22
+
+               1 1 0 0  ==>  24      1 1 0 1  ==>  26
+               1 1 1 0  ==>  28      1 1 1 1  ==>  30"
+    ::= { ipCidrRouteEntry 3 }
+
+ipCidrRouteNextHop OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "On remote routes, the address of the next system en
+            route; Otherwise, 0.0.0.0."
+    ::= { ipCidrRouteEntry 4 }
+
+ipCidrRouteIfIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The ifIndex value that identifies the local interface
+            through which the next hop of this route should be
+            reached."
+    DEFVAL { 0 }
+    ::= { ipCidrRouteEntry 5 }
+
+ipCidrRouteType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other    (1), -- not specified by this MIB
+                reject   (2), -- route that discards traffic
+                local    (3), -- local interface
+                remote   (4)  -- remote destination
+             }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The type of route.  Note that local(3) refers to a
+            route for which the next hop is the final destination;
+            remote(4) refers to a route for which the next hop is
+            not the final destination.
+
+            Routes that do not result in traffic forwarding or
+            rejection should not be displayed, even if the
+            implementation keeps them stored internally.
+
+            reject (2) refers to a route that, if matched,
+            discards the message as unreachable.  This is used in
+            some protocols as a means of correctly aggregating
+            routes."
+    ::= { ipCidrRouteEntry 6 }
+
+ipCidrRouteProto OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+
+                        -- the following are all dynamic
+                        -- routing protocols
+                egp        (5),  -- Exterior Gateway Protocol
+                ggp        (6),  -- Gateway-Gateway Protocol
+                hello      (7),  -- FuzzBall HelloSpeak
+                rip        (8),  -- Berkeley RIP or RIP-II
+                isIs       (9),  -- Dual IS-IS
+                esIs       (10), -- ISO 9542
+                ciscoIgrp  (11), -- Cisco IGRP
+                bbnSpfIgp  (12), -- BBN SPF IGP
+                ospf       (13), -- Open Shortest Path First
+                bgp        (14), -- Border Gateway Protocol
+                idpr       (15), -- InterDomain Policy Routing
+                ciscoEigrp (16)  -- Cisco EIGRP
+             }
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The routing mechanism via which this route was learned.
+            Inclusion of values for gateway routing protocols is
+            not intended to imply that hosts should support those
+            protocols."
+    ::= { ipCidrRouteEntry 7 }
+
+ipCidrRouteAge OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of seconds since this route was last updated
+            or otherwise determined to be correct.  Note that no
+            semantics of `too old' can be implied, except through
+            knowledge of the routing protocol by which the route
+            was learned."
+    DEFVAL  { 0 }
+    ::= { ipCidrRouteEntry 8 }
+
+ipCidrRouteInfo OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "A reference to MIB definitions specific to the
+            particular routing protocol that is responsible for
+            this route, as determined by the value specified in the
+            route's ipCidrRouteProto value.  If this information is
+            not present, its value should be set to the OBJECT
+            IDENTIFIER { 0 0 }, which is a syntactically valid
+            object identifier, and any implementation conforming to
+            ASN.1 and the Basic Encoding Rules must be able to
+            generate and recognize this value."
+    ::= { ipCidrRouteEntry 9 }
+
+ipCidrRouteNextHopAS OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The Autonomous System Number of the Next Hop.  The
+            semantics of this object are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  When this object is unknown or not relevant, its
+            value should be set to zero."
+    DEFVAL { 0 }
+    ::= { ipCidrRouteEntry 10 }
+
+ipCidrRouteMetric1 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The primary routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 11 }
+
+ipCidrRouteMetric2 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 12 }
+
+ipCidrRouteMetric3 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 13 }
+
+ipCidrRouteMetric4 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 14 }
+
+ipCidrRouteMetric5 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 15 }
+
+ipCidrRouteStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions."
+    ::= { ipCidrRouteEntry 16 }
+
+-- compliance statements
+
+ipForwardCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for SNMPv2 entities that
+            implement the ipForward MIB.
+
+            This compliance statement has been deprecated and
+            replaced with ipForwardFullCompliance and
+            ipForwardReadOnlyCompliance."
+
+   MODULE  -- this module
+   MANDATORY-GROUPS { ipForwardCidrRouteGroup }
+   ::= { ipForwardCompliances 1 }
+
+-- units of conformance
+
+ipForwardCidrRouteGroup OBJECT-GROUP
+    OBJECTS { ipCidrRouteNumber,
+              ipCidrRouteDest, ipCidrRouteMask, ipCidrRouteTos,
+              ipCidrRouteNextHop, ipCidrRouteIfIndex,
+              ipCidrRouteType, ipCidrRouteProto, ipCidrRouteAge,
+              ipCidrRouteInfo,ipCidrRouteNextHopAS,
+              ipCidrRouteMetric1, ipCidrRouteMetric2,
+              ipCidrRouteMetric3, ipCidrRouteMetric4,
+              ipCidrRouteMetric5, ipCidrRouteStatus
+        }
+    STATUS     deprecated
+    DESCRIPTION
+           "The CIDR Route Table.
+
+            This group has been deprecated and replaced with
+            inetForwardCidrRouteGroup."
+    ::= { ipForwardGroups 3 }
+
+-- Obsoleted Definitions - Objects
+
+ipForwardNumber OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The number of current ipForwardTable entries that are
+            not invalid."
+    ::= { ipForward 1 }
+
+--  IP Forwarding Table
+
+--  The IP Forwarding Table obsoletes and replaces the ipRoute
+--  Table current in MIB-I and MIB-II.  It adds knowledge of
+--  the autonomous system of the next hop, multiple next hop
+--  support, and policy routing support.
+
+ipForwardTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpForwardEntry
+    MAX-ACCESS not-accessible
+    STATUS     obsolete
+    DESCRIPTION
+           "This entity's IP Routing table."
+    REFERENCE
+           "RFC 1213 Section 6.6, The IP Group"
+    ::= { ipForward 2 }
+
+ipForwardEntry OBJECT-TYPE
+    SYNTAX     IpForwardEntry
+    MAX-ACCESS not-accessible
+    STATUS     obsolete
+    DESCRIPTION
+           "A particular route to a particular destination, under a
+            particular policy."
+    INDEX {
+        ipForwardDest,
+        ipForwardProto,
+        ipForwardPolicy,
+        ipForwardNextHop
+        }
+    ::= { ipForwardTable 1 }
+
+IpForwardEntry ::= SEQUENCE {
+        ipForwardDest       IpAddress,
+        ipForwardMask       IpAddress,
+        ipForwardPolicy     Integer32,
+        ipForwardNextHop    IpAddress,
+        ipForwardIfIndex    Integer32,
+        ipForwardType       INTEGER,
+        ipForwardProto      INTEGER,
+        ipForwardAge        Integer32,
+        ipForwardInfo       OBJECT IDENTIFIER,
+        ipForwardNextHopAS  Integer32,
+        ipForwardMetric1    Integer32,
+        ipForwardMetric2    Integer32,
+        ipForwardMetric3    Integer32,
+        ipForwardMetric4    Integer32,
+        ipForwardMetric5    Integer32
+    }
+
+ipForwardDest OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The destination IP address of this route.  An entry
+            with a value of 0.0.0.0 is considered a default route.
+
+            This object may not take a Multicast (Class D) address
+            value.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipForwardMask object is
+            not equal to x."
+    ::= { ipForwardEntry 1 }
+
+ipForwardMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "Indicate the mask to be logical-ANDed with the
+            destination address before being compared to the value
+            in the ipForwardDest field.  For those systems that do
+            not support arbitrary subnet masks, an agent constructs
+            the value of the ipForwardMask by reference to the IP
+            Address Class.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipForwardDest object is
+            not equal to ipForwardDest."
+    DEFVAL { '00000000'H }      -- 0.0.0.0
+    ::= { ipForwardEntry 2 }
+
+-- The following convention is included for specification
+-- of TOS Field contents.  At this time, the Host Requirements
+-- and the Router Requirements documents disagree on the width
+-- of the TOS field.  This mapping describes the Router
+
+-- Requirements mapping, and leaves room to widen the TOS field
+-- without impact to fielded systems.
+
+ipForwardPolicy OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The general set of conditions that would cause
+            the selection of one multipath route (set of
+            next hops for a given destination) is referred
+            to as 'policy'.
+
+            Unless the mechanism indicated by ipForwardProto
+            specifies otherwise, the policy specifier is
+            the IP TOS Field.  The encoding of IP TOS is as
+            specified by the following convention.  Zero
+            indicates the default path if no more specific
+            policy applies.
+
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+            |                 |                       |     |
+            |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
+            |                 |                       |     |
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+
+                         IP TOS                IP TOS
+               Field     Policy      Field     Policy
+               Contents    Code      Contents    Code
+               0 0 0 0  ==>   0      0 0 0 1  ==>   2
+               0 0 1 0  ==>   4      0 0 1 1  ==>   6
+               0 1 0 0  ==>   8      0 1 0 1  ==>  10
+               0 1 1 0  ==>  12      0 1 1 1  ==>  14
+               1 0 0 0  ==>  16      1 0 0 1  ==>  18
+               1 0 1 0  ==>  20      1 0 1 1  ==>  22
+               1 1 0 0  ==>  24      1 1 0 1  ==>  26
+               1 1 1 0  ==>  28      1 1 1 1  ==>  30
+
+            Protocols defining 'policy' otherwise must either
+            define a set of values that are valid for
+            this object or must implement an integer-instanced
+            policy table for which this object's
+            value acts as an index."
+    ::= { ipForwardEntry 3 }
+
+ipForwardNextHop OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "On remote routes, the address of the next system en
+            route; otherwise, 0.0.0.0."
+    ::= { ipForwardEntry 4 }
+
+ipForwardIfIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The ifIndex value that identifies the local interface
+            through which the next hop of this route should be
+            reached."
+    DEFVAL { 0 }
+    ::= { ipForwardEntry 5 }
+
+ipForwardType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other    (1), -- not specified by this MIB
+                invalid  (2), -- logically deleted
+                local    (3), -- local interface
+                remote   (4)  -- remote destination
+             }
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The type of route.  Note that local(3) refers to a
+            route for which the next hop is the final destination;
+            remote(4) refers to a route for which the next hop is
+            not the final destination.
+
+            Setting this object to the value invalid(2) has the
+            effect of invalidating the corresponding entry in the
+            ipForwardTable object.  That is, it effectively
+            disassociates the destination identified with said
+            entry from the route identified with said entry.  It is
+            an implementation-specific matter as to whether the
+            agent removes an invalidated entry from the table.
+            Accordingly, management stations must be prepared to
+            receive tabular information from agents that
+            corresponds to entries not currently in use.  Proper
+            interpretation of such entries requires examination of
+            the relevant ipForwardType object."
+    DEFVAL { invalid }
+    ::= { ipForwardEntry 6 }
+
+ipForwardProto OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+
+                        -- the following are all dynamic
+                        -- routing protocols
+                egp       (5),  -- Exterior Gateway Protocol
+                ggp       (6),  -- Gateway-Gateway Protocol
+                hello     (7),  -- FuzzBall HelloSpeak
+                rip       (8),  -- Berkeley RIP or RIP-II
+                is-is     (9),  -- Dual IS-IS
+                es-is     (10), -- ISO 9542
+                ciscoIgrp (11), -- Cisco IGRP
+                bbnSpfIgp (12), -- BBN SPF IGP
+                ospf      (13), -- Open Shortest Path First
+                bgp       (14), -- Border Gateway Protocol
+                idpr      (15)  -- InterDomain Policy Routing
+             }
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The routing mechanism via which this route was learned.
+            Inclusion of values for gateway routing protocols is
+            not intended to imply that hosts should support those
+            protocols."
+    ::= { ipForwardEntry 7 }
+
+ipForwardAge OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The number of seconds since this route was last updated
+            or otherwise determined to be correct.  Note that no
+            semantics of `too old' can be implied except through
+            knowledge of the routing protocol by which the route
+            was learned."
+    DEFVAL  { 0 }
+    ::= { ipForwardEntry 8 }
+
+ipForwardInfo OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "A reference to MIB definitions specific to the
+            particular routing protocol that is responsible for
+            this route, as determined by the value specified in the
+            route's ipForwardProto value.  If this information is
+            not present, its value should be set to the OBJECT
+            IDENTIFIER { 0 0 }, which is a syntactically valid
+            object identifier, and any implementation conforming to
+            ASN.1 and the Basic Encoding Rules must be able to
+            generate and recognize this value."
+    ::= { ipForwardEntry 9 }
+
+ipForwardNextHopAS OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The Autonomous System Number of the Next Hop.  When
+            this is unknown or not relevant to the protocol
+            indicated by ipForwardProto, zero."
+    DEFVAL { 0 }
+    ::= { ipForwardEntry 10 }
+
+ipForwardMetric1 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The primary routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 11 }
+
+ipForwardMetric2 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 12 }
+
+ipForwardMetric3 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 13 }
+
+ipForwardMetric4 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 14 }
+
+ipForwardMetric5 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 15 }
+
+-- Obsoleted Definitions - Groups
+-- compliance statements
+
+ipForwardOldCompliance MODULE-COMPLIANCE
+    STATUS     obsolete
+    DESCRIPTION
+           "The compliance statement for SNMP entities that
+            implement the ipForward MIB."
+
+   MODULE  -- this module
+   MANDATORY-GROUPS { ipForwardMultiPathGroup }
+   ::= { ipForwardCompliances 2 }
+
+ipForwardMultiPathGroup OBJECT-GROUP
+    OBJECTS { ipForwardNumber,
+              ipForwardDest, ipForwardMask, ipForwardPolicy,
+              ipForwardNextHop, ipForwardIfIndex, ipForwardType,
+              ipForwardProto, ipForwardAge, ipForwardInfo,
+              ipForwardNextHopAS,
+              ipForwardMetric1, ipForwardMetric2, ipForwardMetric3,
+              ipForwardMetric4, ipForwardMetric5
+        }
+    STATUS     obsolete
+    DESCRIPTION
+           "IP Multipath Route Table."
+    ::= { ipForwardGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/IP-MIB.mib b/snmp_builder/mibs/IP-MIB.mib
new file mode 100644
index 0000000..fe2db5f
--- /dev/null
+++ b/snmp_builder/mibs/IP-MIB.mib
@@ -0,0 +1,4993 @@
+IP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, Counter32, IpAddress,
+    mib-2, Unsigned32, Counter64,
+    zeroDotZero                        FROM SNMPv2-SMI
+    PhysAddress, TruthValue,
+    TimeStamp, RowPointer,
+    TEXTUAL-CONVENTION, TestAndIncr,
+    RowStatus, StorageType             FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
+    InetAddress, InetAddressType,
+    InetAddressPrefixLength,
+    InetVersion, InetZoneIndex         FROM INET-ADDRESS-MIB
+    InterfaceIndex                     FROM IF-MIB;
+
+ipMIB MODULE-IDENTITY
+    LAST-UPDATED "200602020000Z"
+    ORGANIZATION "IETF IPv6 MIB Revision Team"
+    CONTACT-INFO
+           "Editor:
+
+            Shawn A. Routhier
+            Interworking Labs
+            108 Whispering Pines Dr. Suite 235
+            Scotts Valley, CA 95066
+            USA
+            EMail: <sar@iwl.com>"
+    DESCRIPTION
+           "The MIB module for managing IP and ICMP implementations, but
+            excluding their management of IP routes.
+
+            Copyright (C) The Internet Society (2006).  This version of
+            this MIB module is part of RFC 4293; see the RFC itself for
+            full legal notices."
+
+    REVISION      "200602020000Z"
+    DESCRIPTION
+           "The IP version neutral revision with added IPv6 objects for
+            ND, default routers, and router advertisements.  As well as
+            being the successor to RFC 2011, this MIB is also the
+            successor to RFCs 2465 and 2466.  Published as RFC 4293."
+
+    REVISION      "199411010000Z"
+    DESCRIPTION
+           "A separate MIB module (IP-MIB) for IP and ICMP management
+            objects.  Published as RFC 2011."
+
+    REVISION      "199103310000Z"
+    DESCRIPTION
+           "The initial revision of this MIB module was part of MIB-II,
+            which was published as RFC 1213."
+    ::= { mib-2 48}
+
+--
+-- The textual conventions we define and use in this MIB.
+--
+
+IpAddressOriginTC ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+           "The origin of the address.
+
+            manual(2) indicates that the address was manually configured
+            to a specified address, e.g., by user configuration.
+
+            dhcp(4) indicates an address that was assigned to this
+            system by a DHCP server.
+
+            linklayer(5) indicates an address created by IPv6 stateless
+
+            auto-configuration.
+
+            random(6) indicates an address chosen by the system at
+            random, e.g., an IPv4 address within 169.254/16, or an RFC
+            3041 privacy address."
+    SYNTAX     INTEGER {
+        other(1),
+        manual(2),
+        dhcp(4),
+        linklayer(5),
+        random(6)
+    }
+
+IpAddressStatusTC ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+           "The status of an address.  Most of the states correspond to
+            states from the IPv6 Stateless Address Autoconfiguration
+            protocol.
+
+            The preferred(1) state indicates that this is a valid
+            address that can appear as the destination or source address
+            of a packet.
+
+            The deprecated(2) state indicates that this is a valid but
+            deprecated address that should no longer be used as a source
+            address in new communications, but packets addressed to such
+            an address are processed as expected.
+
+            The invalid(3) state indicates that this isn't a valid
+            address and it shouldn't appear as the destination or source
+            address of a packet.
+
+            The inaccessible(4) state indicates that the address is not
+            accessible because the interface to which this address is
+            assigned is not operational.
+
+            The unknown(5) state indicates that the status cannot be
+            determined for some reason.
+
+            The tentative(6) state indicates that the uniqueness of the
+            address on the link is being verified.  Addresses in this
+            state should not be used for general communication and
+            should only be used to determine the uniqueness of the
+            address.
+
+            The duplicate(7) state indicates the address has been
+            determined to be non-unique on the link and so must not be
+
+            used.
+
+            The optimistic(8) state indicates the address is available
+            for use, subject to restrictions, while its uniqueness on
+            a link is being verified.
+
+            In the absence of other information, an IPv4 address is
+            always preferred(1)."
+    REFERENCE "RFC 2462"
+    SYNTAX     INTEGER {
+        preferred(1),
+        deprecated(2),
+        invalid(3),
+        inaccessible(4),
+        unknown(5),
+        tentative(6),
+        duplicate(7),
+        optimistic(8)
+    }
+
+IpAddressPrefixOriginTC ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+           "The origin of this prefix.
+
+            manual(2) indicates a prefix that was manually configured.
+
+            wellknown(3) indicates a well-known prefix, e.g., 169.254/16
+            for IPv4 auto-configuration or fe80::/10 for IPv6 link-local
+            addresses.  Well known prefixes may be assigned by IANA,
+            the address registries, or by specification in a standards
+            track RFC.
+
+            dhcp(4) indicates a prefix that was assigned by a DHCP
+            server.
+
+            routeradv(5) indicates a prefix learned from a router
+            advertisement.
+
+            Note: while IpAddressOriginTC and IpAddressPrefixOriginTC
+            are similar, they are not identical.  The first defines how
+            an address was created, while the second defines how a
+            prefix was found."
+    SYNTAX     INTEGER {
+        other(1),
+        manual(2),
+        wellknown(3),
+        dhcp(4),
+        routeradv(5)
+    }
+
+Ipv6AddressIfIdentifierTC ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "2x:"
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model IPv6 address
+       interface identifiers.  This is a binary string
+       of up to 8 octets in network byte-order."
+     SYNTAX      OCTET STRING (SIZE (0..8))
+
+--
+-- the IP general group
+-- some objects that affect all of IPv4
+--
+
+ip       OBJECT IDENTIFIER ::= { mib-2 4 }
+
+ipForwarding OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    forwarding(1),    -- acting as a router
+                    notForwarding(2)  -- NOT acting as a router
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether this entity is acting as an IPv4
+            router in respect to the forwarding of datagrams received
+            by, but not addressed to, this entity.  IPv4 routers forward
+            datagrams.  IPv4 hosts do not (except those source-routed
+            via the host).
+
+            When this object is written, the entity should save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system.
+            Note: a stronger requirement is not used because this object
+            was previously defined."
+    ::= { ip 1 }
+
+ipDefaultTTL OBJECT-TYPE
+    SYNTAX     Integer32 (1..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The default value inserted into the Time-To-Live field of
+            the IPv4 header of datagrams originated at this entity,
+            whenever a TTL value is not supplied by the transport layer
+
+            protocol.
+
+            When this object is written, the entity should save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system.
+            Note: a stronger requirement is not used because this object
+            was previously defined."
+    ::= { ip 2 }
+
+ipReasmTimeout OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The maximum number of seconds that received fragments are
+            held while they are awaiting reassembly at this entity."
+    ::= { ip 13 }
+
+--
+-- the IPv6 general group
+-- Some objects that affect all of IPv6
+--
+
+ipv6IpForwarding OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    forwarding(1),    -- acting as a router
+                    notForwarding(2)  -- NOT acting as a router
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether this entity is acting as an IPv6
+            router on any interface in respect to the forwarding of
+            datagrams received by, but not addressed to, this entity.
+            IPv6 routers forward datagrams.  IPv6 hosts do not (except
+            those source-routed via the host).
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    ::= { ip 25 }
+
+ipv6IpDefaultHopLimit OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The default value inserted into the Hop Limit field of the
+            IPv6 header of datagrams originated at this entity whenever
+            a Hop Limit value is not supplied by the transport layer
+            protocol.
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    REFERENCE "RFC 2461 Section 6.3.2"
+    ::= { ip 26 }
+
+--
+-- IPv4 Interface Table
+--
+
+ipv4InterfaceTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            a row in the ipv4InterfaceTable was added or deleted, or
+            when an ipv4InterfaceReasmMaxSize or an
+            ipv4InterfaceEnableStatus object was modified.
+
+            If new objects are added to the ipv4InterfaceTable that
+            require the ipv4InterfaceTableLastChange to be updated when
+            they are modified, they must specify that requirement in
+            their description clause."
+    ::= { ip 27 }
+
+ipv4InterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv4InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing per-interface IPv4-specific
+            information."
+    ::= { ip 28 }
+
+ipv4InterfaceEntry OBJECT-TYPE
+    SYNTAX     Ipv4InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing IPv4-specific information for a specific
+            interface."
+    INDEX { ipv4InterfaceIfIndex }
+    ::= { ipv4InterfaceTable 1 }
+
+Ipv4InterfaceEntry ::= SEQUENCE {
+        ipv4InterfaceIfIndex         InterfaceIndex,
+        ipv4InterfaceReasmMaxSize    Integer32,
+        ipv4InterfaceEnableStatus    INTEGER,
+        ipv4InterfaceRetransmitTime  Unsigned32
+    }
+
+ipv4InterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv4InterfaceEntry 1 }
+
+ipv4InterfaceReasmMaxSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The size of the largest IPv4 datagram that this entity can
+            re-assemble from incoming IPv4 fragmented datagrams received
+            on this interface."
+    ::= { ipv4InterfaceEntry 2 }
+
+ipv4InterfaceEnableStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 up(1),
+                 down(2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether IPv4 is enabled (up) or disabled
+            (down) on this interface.  This object does not affect the
+            state of the interface itself, only its connection to an
+            IPv4 stack.  The IF-MIB should be used to control the state
+            of the interface."
+    ::= { ipv4InterfaceEntry 3 }
+
+ipv4InterfaceRetransmitTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time between retransmissions of ARP requests to a
+            neighbor when resolving the address or when probing the
+            reachability of a neighbor."
+    REFERENCE "RFC 1122"
+    DEFVAL { 1000 }
+    ::= { ipv4InterfaceEntry 4 }
+
+--
+-- v6 interface table
+--
+
+ipv6InterfaceTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            a row in the ipv6InterfaceTable was added or deleted or when
+            an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier,
+            ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime,
+            ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding
+            object was modified.
+
+            If new objects are added to the ipv6InterfaceTable that
+            require the ipv6InterfaceTableLastChange to be updated when
+            they are modified, they must specify that requirement in
+            their description clause."
+    ::= { ip 29 }
+
+ipv6InterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv6InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing per-interface IPv6-specific
+            information."
+    ::= { ip 30 }
+
+ipv6InterfaceEntry OBJECT-TYPE
+    SYNTAX     Ipv6InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing IPv6-specific information for a given
+            interface."
+    INDEX { ipv6InterfaceIfIndex }
+    ::= { ipv6InterfaceTable 1 }
+
+Ipv6InterfaceEntry ::= SEQUENCE {
+        ipv6InterfaceIfIndex         InterfaceIndex,
+        ipv6InterfaceReasmMaxSize    Unsigned32,
+        ipv6InterfaceIdentifier      Ipv6AddressIfIdentifierTC,
+        ipv6InterfaceEnableStatus    INTEGER,
+        ipv6InterfaceReachableTime   Unsigned32,
+        ipv6InterfaceRetransmitTime  Unsigned32,
+        ipv6InterfaceForwarding      INTEGER
+    }
+
+ipv6InterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv6InterfaceEntry 1 }
+
+ipv6InterfaceReasmMaxSize OBJECT-TYPE
+    SYNTAX     Unsigned32 (1500..65535)
+    UNITS      "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The size of the largest IPv6 datagram that this entity can
+            re-assemble from incoming IPv6 fragmented datagrams received
+            on this interface."
+    ::= { ipv6InterfaceEntry 2 }
+
+ipv6InterfaceIdentifier OBJECT-TYPE
+    SYNTAX     Ipv6AddressIfIdentifierTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The Interface Identifier for this interface.  The Interface
+            Identifier is combined with an address prefix to form an
+            interface address.
+
+            By default, the Interface Identifier is auto-configured
+            according to the rules of the link type to which this
+            interface is attached.
+
+            A zero length identifier may be used where appropriate.  One
+            possible example is a loopback interface."
+    ::= { ipv6InterfaceEntry 3 }
+
+-- This object ID is reserved as it was used in earlier versions of
+-- the MIB module.  In theory, OIDs are not assigned until the
+-- specification is released as an RFC; however, as some companies
+-- may have shipped code based on earlier versions of the MIB, it
+-- seems best to reserve this OID.  This OID had been
+-- ipv6InterfacePhysicalAddress.
+-- ::= { ipv6InterfaceEntry 4}
+
+ipv6InterfaceEnableStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 up(1),
+                 down(2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether IPv6 is enabled (up) or disabled
+            (down) on this interface.  This object does not affect the
+            state of the interface itself, only its connection to an
+            IPv6 stack.  The IF-MIB should be used to control the state
+            of the interface.
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    ::= { ipv6InterfaceEntry 5 }
+
+ipv6InterfaceReachableTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time a neighbor is considered reachable after receiving
+            a reachability confirmation."
+    REFERENCE "RFC 2461, Section 6.3.2"
+    ::= { ipv6InterfaceEntry 6 }
+
+ipv6InterfaceRetransmitTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time between retransmissions of Neighbor Solicitation
+            messages to a neighbor when resolving the address or when
+            probing the reachability of a neighbor."
+    REFERENCE "RFC 2461, Section 6.3.2"
+    ::= { ipv6InterfaceEntry 7 }
+
+ipv6InterfaceForwarding OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    forwarding(1),    -- acting as a router
+                    notForwarding(2)  -- NOT acting as a router
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether this entity is acting as an IPv6
+            router on this interface with respect to the forwarding of
+            datagrams received by, but not addressed to, this entity.
+            IPv6 routers forward datagrams.  IPv6 hosts do not (except
+            those source-routed via the host).
+
+            This object is constrained by ipv6IpForwarding and is
+            ignored if ipv6IpForwarding is set to notForwarding.  Those
+            systems that do not provide per-interface control of the
+            forwarding function should set this object to forwarding for
+            all interfaces and allow the ipv6IpForwarding object to
+            control the forwarding capability.
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    ::= { ipv6InterfaceEntry 8 }
+
+--
+-- Per-Interface or System-Wide IP statistics.
+--
+-- The following two tables, ipSystemStatsTable and ipIfStatsTable,
+-- are intended to provide the same counters at different granularities.
+-- The ipSystemStatsTable provides system wide counters aggregating
+-- the traffic counters for all interfaces for a given address type.
+-- The ipIfStatsTable provides the same counters but for specific
+-- interfaces rather than as an aggregate.
+--
+-- Note well: If a system provides both system-wide and interface-
+-- specific values, the system-wide value may not be equal to the sum
+-- of the interface-specific values across all interfaces due to e.g.,
+-- dynamic interface creation/deletion.
+--
+-- Note well: Both of these tables contain some items that are
+
+-- represented by two objects, representing the value in either 32
+-- or 64 bits.  For those objects, the 32-bit value MUST be the low
+-- order 32 bits of the 64-bit value.  Also note that the 32-bit
+-- counters must be included when the 64-bit counters are included.
+
+ipTrafficStats OBJECT IDENTIFIER ::= { ip 31 }
+
+ipSystemStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpSystemStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing system wide, IP version specific
+            traffic statistics.  This table and the ipIfStatsTable
+            contain similar objects whose difference is in their
+            granularity.  Where this table contains system wide traffic
+            statistics, the ipIfStatsTable contains the same statistics
+            but counted on a per-interface basis."
+    ::= { ipTrafficStats 1 }
+
+ipSystemStatsEntry OBJECT-TYPE
+    SYNTAX     IpSystemStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A statistics entry containing system-wide objects for a
+            particular IP version."
+    INDEX { ipSystemStatsIPVersion }
+    ::= { ipSystemStatsTable 1 }
+
+IpSystemStatsEntry ::= SEQUENCE {
+        ipSystemStatsIPVersion           InetVersion,
+        ipSystemStatsInReceives          Counter32,
+        ipSystemStatsHCInReceives        Counter64,
+        ipSystemStatsInOctets            Counter32,
+        ipSystemStatsHCInOctets          Counter64,
+        ipSystemStatsInHdrErrors         Counter32,
+        ipSystemStatsInNoRoutes          Counter32,
+        ipSystemStatsInAddrErrors        Counter32,
+        ipSystemStatsInUnknownProtos     Counter32,
+        ipSystemStatsInTruncatedPkts     Counter32,
+        ipSystemStatsInForwDatagrams     Counter32,
+        ipSystemStatsHCInForwDatagrams   Counter64,
+        ipSystemStatsReasmReqds          Counter32,
+        ipSystemStatsReasmOKs            Counter32,
+        ipSystemStatsReasmFails          Counter32,
+        ipSystemStatsInDiscards          Counter32,
+        ipSystemStatsInDelivers          Counter32,
+        ipSystemStatsHCInDelivers        Counter64,
+        ipSystemStatsOutRequests         Counter32,
+        ipSystemStatsHCOutRequests       Counter64,
+        ipSystemStatsOutNoRoutes         Counter32,
+        ipSystemStatsOutForwDatagrams    Counter32,
+        ipSystemStatsHCOutForwDatagrams  Counter64,
+        ipSystemStatsOutDiscards         Counter32,
+        ipSystemStatsOutFragReqds        Counter32,
+        ipSystemStatsOutFragOKs          Counter32,
+        ipSystemStatsOutFragFails        Counter32,
+        ipSystemStatsOutFragCreates      Counter32,
+        ipSystemStatsOutTransmits        Counter32,
+        ipSystemStatsHCOutTransmits      Counter64,
+        ipSystemStatsOutOctets           Counter32,
+        ipSystemStatsHCOutOctets         Counter64,
+        ipSystemStatsInMcastPkts         Counter32,
+        ipSystemStatsHCInMcastPkts       Counter64,
+        ipSystemStatsInMcastOctets       Counter32,
+        ipSystemStatsHCInMcastOctets     Counter64,
+        ipSystemStatsOutMcastPkts        Counter32,
+        ipSystemStatsHCOutMcastPkts      Counter64,
+        ipSystemStatsOutMcastOctets      Counter32,
+        ipSystemStatsHCOutMcastOctets    Counter64,
+        ipSystemStatsInBcastPkts         Counter32,
+        ipSystemStatsHCInBcastPkts       Counter64,
+        ipSystemStatsOutBcastPkts        Counter32,
+        ipSystemStatsHCOutBcastPkts      Counter64,
+        ipSystemStatsDiscontinuityTime   TimeStamp,
+        ipSystemStatsRefreshRate         Unsigned32
+    }
+
+ipSystemStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of this row."
+    ::= { ipSystemStatsEntry 1 }
+
+-- This object ID is reserved to allow the IDs for this table's objects
+-- to align with the objects in the ipIfStatsTable.
+-- ::= { ipSystemStatsEntry 2 }
+
+ipSystemStatsInReceives OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 3 }
+
+ipSystemStatsHCInReceives OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.  This object counts the same
+            datagrams as ipSystemStatsInReceives, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 4 }
+
+ipSystemStatsInOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  Octets from datagrams
+            counted in ipSystemStatsInReceives MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 5 }
+
+ipSystemStatsHCInOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  This object counts the
+            same octets as ipSystemStatsInOctets, but allows for larger
+
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 6 }
+
+ipSystemStatsInHdrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded due to errors in
+            their IP headers, including version number mismatch, other
+            format errors, hop count exceeded, errors discovered in
+            processing their IP options, etc.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 7 }
+
+ipSystemStatsInNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because no route
+            could be found to transmit them to their destination.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 8 }
+
+ipSystemStatsInAddrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the IP
+            address in their IP header's destination field was not a
+            valid address to be received at this entity.  This count
+            includes invalid addresses (e.g., ::0).  For entities
+            that are not IP routers and therefore do not forward
+
+            datagrams, this counter includes datagrams discarded
+            because the destination address was not a local address.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 9 }
+
+ipSystemStatsInUnknownProtos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of locally-addressed IP datagrams received
+            successfully but discarded because of an unknown or
+            unsupported protocol.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 10 }
+
+ipSystemStatsInTruncatedPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the
+            datagram frame didn't carry enough data.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 11 }
+
+ipSystemStatsInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  In entities that do not act as IP routers,
+            this counter will include only those datagrams that were
+            Source-Routed via this entity, and the Source-Route
+            processing was successful.
+
+            When tracking interface statistics, the counter of the
+            incoming interface is incremented for each datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 12 }
+
+ipSystemStatsHCInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  This object counts the same packets as
+            ipSystemStatsInForwDatagrams, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 13 }
+
+ipSystemStatsReasmReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP fragments received that needed to be
+            reassembled at this interface.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 14 }
+
+ipSystemStatsReasmOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams successfully reassembled.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 15 }
+
+ipSystemStatsReasmFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of failures detected by the IP re-assembly
+            algorithm (for whatever reason: timed out, errors, etc.).
+            Note that this is not necessarily a count of discarded IP
+            fragments since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments by
+            combining them as they are received.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 16 }
+
+ipSystemStatsInDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams for which no problems were
+            encountered to prevent their continued processing, but
+            were discarded (e.g., for lack of buffer space).  Note that
+            this counter does not include any datagrams discarded while
+            awaiting re-assembly.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 17 }
+
+ipSystemStatsInDelivers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 18 }
+
+ipSystemStatsHCInDelivers OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).  This object counts the
+            same packets as ipSystemStatsInDelivers, but allows for
+            larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 19 }
+
+ipSystemStatsOutRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  Note that this counter does not include any
+            datagrams counted in ipSystemStatsOutForwDatagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 20 }
+
+ipSystemStatsHCOutRequests OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  This object counts the same packets as
+            ipSystemStatsOutRequests, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 21 }
+
+ipSystemStatsOutNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of locally generated IP datagrams discarded
+            because no route could be found to transmit them to their
+            destination.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 22 }
+
+ipSystemStatsOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  In entities
+            that do not act as IP routers, this counter will include
+            only those datagrams that were Source-Routed via this
+            entity, and the Source-Route processing was successful.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            forwarded datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 23 }
+
+ipSystemStatsHCOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  This object
+            counts the same packets as ipSystemStatsOutForwDatagrams,
+            but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 24 }
+
+ipSystemStatsOutDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output IP datagrams for which no problem was
+            encountered to prevent their transmission to their
+            destination, but were discarded (e.g., for lack of
+            buffer space).  Note that this counter would include
+
+            datagrams counted in ipSystemStatsOutForwDatagrams if any
+            such datagrams met this (discretionary) discard criterion.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 25 }
+
+ipSystemStatsOutFragReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that would require fragmentation
+            in order to be transmitted.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 26 }
+
+ipSystemStatsOutFragOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been successfully
+            fragmented.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 27 }
+
+ipSystemStatsOutFragFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been discarded because
+            they needed to be fragmented but could not be.  This
+            includes IPv4 packets that have the DF bit set and IPv6
+            packets that are being forwarded and exceed the outgoing
+            link MTU.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for an unsuccessfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 28 }
+
+ipSystemStatsOutFragCreates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output datagram fragments that have been
+            generated as a result of IP fragmentation.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 29 }
+
+ipSystemStatsOutTransmits OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This includes
+            datagrams generated locally and those forwarded by this
+            entity.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 30 }
+
+ipSystemStatsHCOutTransmits OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This object counts
+            the same datagrams as ipSystemStatsOutTransmits, but allows
+            for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 31 }
+
+ipSystemStatsOutOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  Octets from datagrams
+            counted in ipSystemStatsOutTransmits MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 32 }
+
+ipSystemStatsHCOutOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  This objects counts the same
+            octets as ipSystemStatsOutOctets, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 33 }
+
+ipSystemStatsInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 34 }
+
+ipSystemStatsHCInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.  This object
+            counts the same datagrams as ipSystemStatsInMcastPkts but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 35 }
+
+ipSystemStatsInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+            datagrams.  Octets from datagrams counted in
+            ipSystemStatsInMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 36 }
+
+ipSystemStatsHCInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+            datagrams.  This object counts the same octets as
+            ipSystemStatsInMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 37 }
+
+ipSystemStatsOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 38 }
+
+ipSystemStatsHCOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.  This
+            object counts the same datagrams as
+            ipSystemStatsOutMcastPkts, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 39 }
+
+ipSystemStatsOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  Octets from datagrams counted in
+
+            ipSystemStatsOutMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 40 }
+
+ipSystemStatsHCOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  This object counts the same octets as
+            ipSystemStatsOutMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 41 }
+
+ipSystemStatsInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 42 }
+
+ipSystemStatsHCInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.  This object
+            counts the same datagrams as ipSystemStatsInBcastPkts but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 43 }
+
+ipSystemStatsOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 44 }
+
+ipSystemStatsHCOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.  This
+            object counts the same datagrams as
+            ipSystemStatsOutBcastPkts, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 45 }
+
+ipSystemStatsDiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            any one or more of this entry's counters suffered a
+            discontinuity.
+
+            If no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipSystemStatsEntry 46 }
+
+ipSystemStatsRefreshRate OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milli-seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The minimum reasonable polling interval for this entry.
+            This object provides an indication of the minimum amount of
+            time required to update the counters in this entry."
+    ::= { ipSystemStatsEntry 47 }
+
+ipIfStatsTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            a row in the ipIfStatsTable was added or deleted.
+
+            If new objects are added to the ipIfStatsTable that require
+            the ipIfStatsTableLastChange to be updated when they are
+            modified, they must specify that requirement in their
+            description clause."
+    ::= { ipTrafficStats 2 }
+
+ipIfStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpIfStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing per-interface traffic statistics.  This
+            table and the ipSystemStatsTable contain similar objects
+            whose difference is in their granularity.  Where this table
+            contains per-interface statistics, the ipSystemStatsTable
+            contains the same statistics, but counted on a system wide
+            basis."
+    ::= { ipTrafficStats 3 }
+
+ipIfStatsEntry OBJECT-TYPE
+    SYNTAX     IpIfStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An interface statistics entry containing objects for a
+            particular interface and version of IP."
+    INDEX { ipIfStatsIPVersion, ipIfStatsIfIndex }
+    ::= { ipIfStatsTable 1 }
+
+IpIfStatsEntry ::= SEQUENCE {
+        ipIfStatsIPVersion           InetVersion,
+        ipIfStatsIfIndex             InterfaceIndex,
+        ipIfStatsInReceives          Counter32,
+        ipIfStatsHCInReceives        Counter64,
+        ipIfStatsInOctets            Counter32,
+        ipIfStatsHCInOctets          Counter64,
+        ipIfStatsInHdrErrors         Counter32,
+        ipIfStatsInNoRoutes          Counter32,
+        ipIfStatsInAddrErrors        Counter32,
+        ipIfStatsInUnknownProtos     Counter32,
+        ipIfStatsInTruncatedPkts     Counter32,
+        ipIfStatsInForwDatagrams     Counter32,
+        ipIfStatsHCInForwDatagrams   Counter64,
+        ipIfStatsReasmReqds          Counter32,
+        ipIfStatsReasmOKs            Counter32,
+        ipIfStatsReasmFails          Counter32,
+        ipIfStatsInDiscards          Counter32,
+        ipIfStatsInDelivers          Counter32,
+        ipIfStatsHCInDelivers        Counter64,
+        ipIfStatsOutRequests         Counter32,
+        ipIfStatsHCOutRequests       Counter64,
+        ipIfStatsOutForwDatagrams    Counter32,
+        ipIfStatsHCOutForwDatagrams  Counter64,
+        ipIfStatsOutDiscards         Counter32,
+        ipIfStatsOutFragReqds        Counter32,
+        ipIfStatsOutFragOKs          Counter32,
+        ipIfStatsOutFragFails        Counter32,
+        ipIfStatsOutFragCreates      Counter32,
+        ipIfStatsOutTransmits        Counter32,
+        ipIfStatsHCOutTransmits      Counter64,
+        ipIfStatsOutOctets           Counter32,
+        ipIfStatsHCOutOctets         Counter64,
+        ipIfStatsInMcastPkts         Counter32,
+        ipIfStatsHCInMcastPkts       Counter64,
+        ipIfStatsInMcastOctets       Counter32,
+        ipIfStatsHCInMcastOctets     Counter64,
+        ipIfStatsOutMcastPkts        Counter32,
+        ipIfStatsHCOutMcastPkts      Counter64,
+        ipIfStatsOutMcastOctets      Counter32,
+        ipIfStatsHCOutMcastOctets    Counter64,
+        ipIfStatsInBcastPkts         Counter32,
+        ipIfStatsHCInBcastPkts       Counter64,
+        ipIfStatsOutBcastPkts        Counter32,
+        ipIfStatsHCOutBcastPkts      Counter64,
+        ipIfStatsDiscontinuityTime   TimeStamp,
+        ipIfStatsRefreshRate         Unsigned32
+    }
+
+ipIfStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of this row."
+    ::= { ipIfStatsEntry 1 }
+
+ipIfStatsIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipIfStatsEntry 2 }
+
+ipIfStatsInReceives OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 3 }
+
+ipIfStatsHCInReceives OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.  This object counts the same
+            datagrams as ipIfStatsInReceives, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 4 }
+
+ipIfStatsInOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  Octets from datagrams
+            counted in ipIfStatsInReceives MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 5 }
+
+ipIfStatsHCInOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  This object counts the
+            same octets as ipIfStatsInOctets, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 6 }
+
+ipIfStatsInHdrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded due to errors in
+            their IP headers, including version number mismatch, other
+            format errors, hop count exceeded, errors discovered in
+            processing their IP options, etc.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 7 }
+
+ipIfStatsInNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because no route
+            could be found to transmit them to their destination.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 8 }
+
+ipIfStatsInAddrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the IP
+            address in their IP header's destination field was not a
+            valid address to be received at this entity.  This count
+            includes invalid addresses (e.g., ::0).  For entities that
+            are not IP routers and therefore do not forward datagrams,
+            this counter includes datagrams discarded because the
+            destination address was not a local address.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 9 }
+
+ipIfStatsInUnknownProtos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of locally-addressed IP datagrams received
+            successfully but discarded because of an unknown or
+            unsupported protocol.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 10 }
+
+ipIfStatsInTruncatedPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the
+            datagram frame didn't carry enough data.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 11 }
+
+ipIfStatsInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  In entities that do not act as IP routers,
+            this counter will include only those datagrams that were
+            Source-Routed via this entity, and the Source-Route
+            processing was successful.
+
+            When tracking interface statistics, the counter of the
+            incoming interface is incremented for each datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 12 }
+
+ipIfStatsHCInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  This object counts the same packets as
+
+            ipIfStatsInForwDatagrams, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 13 }
+
+ipIfStatsReasmReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP fragments received that needed to be
+            reassembled at this interface.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 14 }
+
+ipIfStatsReasmOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams successfully reassembled.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 15 }
+
+ipIfStatsReasmFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of failures detected by the IP re-assembly
+            algorithm (for whatever reason: timed out, errors, etc.).
+            Note that this is not necessarily a count of discarded IP
+            fragments since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments by
+            combining them as they are received.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 16 }
+
+ipIfStatsInDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams for which no problems were
+            encountered to prevent their continued processing, but
+            were discarded (e.g., for lack of buffer space).  Note that
+            this counter does not include any datagrams discarded while
+            awaiting re-assembly.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 17 }
+
+ipIfStatsInDelivers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 18 }
+
+ipIfStatsHCInDelivers OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).  This object counts the
+            same packets as ipIfStatsInDelivers, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 19 }
+
+ipIfStatsOutRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  Note that this counter does not include any
+            datagrams counted in ipIfStatsOutForwDatagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 20 }
+
+ipIfStatsHCOutRequests OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  This object counts the same packets as
+
+            ipIfStatsOutRequests, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 21 }
+
+-- This object ID is reserved to allow the IDs for this table's objects
+-- to align with the objects in the ipSystemStatsTable.
+-- ::= {ipIfStatsEntry 22}
+
+ipIfStatsOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  In entities
+            that do not act as IP routers, this counter will include
+            only those datagrams that were Source-Routed via this
+            entity, and the Source-Route processing was successful.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            forwarded datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 23 }
+
+ipIfStatsHCOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  This object
+            counts the same packets as ipIfStatsOutForwDatagrams, but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 24 }
+
+ipIfStatsOutDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output IP datagrams for which no problem was
+            encountered to prevent their transmission to their
+            destination, but were discarded (e.g., for lack of
+            buffer space).  Note that this counter would include
+            datagrams counted in ipIfStatsOutForwDatagrams if any such
+            datagrams met this (discretionary) discard criterion.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 25 }
+
+ipIfStatsOutFragReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that would require fragmentation
+            in order to be transmitted.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 26 }
+
+ipIfStatsOutFragOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been successfully
+            fragmented.
+
+            When tracking interface statistics, the counter of the
+
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 27 }
+
+ipIfStatsOutFragFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been discarded because
+            they needed to be fragmented but could not be.  This
+            includes IPv4 packets that have the DF bit set and IPv6
+            packets that are being forwarded and exceed the outgoing
+            link MTU.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for an unsuccessfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 28 }
+
+ipIfStatsOutFragCreates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output datagram fragments that have been
+            generated as a result of IP fragmentation.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 29 }
+
+ipIfStatsOutTransmits OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This includes
+            datagrams generated locally and those forwarded by this
+            entity.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 30 }
+
+ipIfStatsHCOutTransmits OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This object counts
+            the same datagrams as ipIfStatsOutTransmits, but allows for
+            larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 31 }
+
+ipIfStatsOutOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  Octets from datagrams
+            counted in ipIfStatsOutTransmits MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 32 }
+
+ipIfStatsHCOutOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  This objects counts the same
+            octets as ipIfStatsOutOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 33 }
+
+ipIfStatsInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 34 }
+
+ipIfStatsHCInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.  This object
+            counts the same datagrams as ipIfStatsInMcastPkts, but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 35 }
+
+ipIfStatsInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+
+            datagrams.  Octets from datagrams counted in
+            ipIfStatsInMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 36 }
+
+ipIfStatsHCInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+            datagrams.  This object counts the same octets as
+            ipIfStatsInMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 37 }
+
+ipIfStatsOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 38 }
+
+ipIfStatsHCOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.  This
+            object counts the same datagrams as ipIfStatsOutMcastPkts,
+            but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 39 }
+
+ipIfStatsOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  Octets from datagrams counted in
+            ipIfStatsOutMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 40 }
+
+ipIfStatsHCOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  This object counts the same octets as
+            ipIfStatsOutMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 41 }
+
+ipIfStatsInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 42 }
+
+ipIfStatsHCInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.  This object
+            counts the same datagrams as ipIfStatsInBcastPkts, but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 43 }
+
+ipIfStatsOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 44 }
+
+ipIfStatsHCOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.  This
+            object counts the same datagrams as ipIfStatsOutBcastPkts,
+            but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 45 }
+
+ipIfStatsDiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+
+            any one or more of this entry's counters suffered a
+            discontinuity.
+
+            If no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipIfStatsEntry 46 }
+
+ipIfStatsRefreshRate OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS "milli-seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The minimum reasonable polling interval for this entry.
+            This object provides an indication of the minimum amount of
+            time required to update the counters in this entry."
+    ::= { ipIfStatsEntry 47 }
+
+--
+-- Internet Address Prefix table
+--
+
+ipAddressPrefixTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpAddressPrefixEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table allows the user to determine the source of an IP
+            address or set of IP addresses, and allows other tables to
+            share the information via pointer rather than by copying.
+
+            For example, when the node configures both a unicast and
+            anycast address for a prefix, the ipAddressPrefix objects
+            for those addresses will point to a single row in this
+            table.
+
+            This table primarily provides support for IPv6 prefixes, and
+            several of the objects are less meaningful for IPv4.  The
+            table continues to allow IPv4 addresses to allow future
+            flexibility.  In order to promote a common configuration,
+            this document includes suggestions for default values for
+            IPv4 prefixes.  Each of these values may be overridden if an
+            object is meaningful to the node.
+
+            All prefixes used by this entity should be included in this
+            table independent of how the entity learned the prefix.
+            (This table isn't limited to prefixes learned from router
+
+            advertisements.)"
+    ::= { ip 32 }
+
+ipAddressPrefixEntry OBJECT-TYPE
+    SYNTAX     IpAddressPrefixEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry in the ipAddressPrefixTable."
+    INDEX    { ipAddressPrefixIfIndex, ipAddressPrefixType,
+               ipAddressPrefixPrefix, ipAddressPrefixLength }
+    ::= { ipAddressPrefixTable 1 }
+
+IpAddressPrefixEntry ::= SEQUENCE {
+        ipAddressPrefixIfIndex               InterfaceIndex,
+        ipAddressPrefixType                  InetAddressType,
+        ipAddressPrefixPrefix                InetAddress,
+        ipAddressPrefixLength                InetAddressPrefixLength,
+        ipAddressPrefixOrigin                IpAddressPrefixOriginTC,
+        ipAddressPrefixOnLinkFlag            TruthValue,
+        ipAddressPrefixAutonomousFlag        TruthValue,
+        ipAddressPrefixAdvPreferredLifetime  Unsigned32,
+        ipAddressPrefixAdvValidLifetime      Unsigned32
+    }
+
+ipAddressPrefixIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface on
+            which this prefix is configured.  The interface identified
+            by a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipAddressPrefixEntry 1 }
+
+ipAddressPrefixType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of ipAddressPrefix."
+    ::= { ipAddressPrefixEntry 2 }
+
+ipAddressPrefixPrefix OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address prefix.  The address type of this object is
+            specified in ipAddressPrefixType.  The length of this object
+            is the standard length for objects of that type (4 or 16
+            bytes).  Any bits after ipAddressPrefixLength must be zero.
+
+            Implementors need to be aware that, if the size of
+            ipAddressPrefixPrefix exceeds 114 octets, then OIDS of
+            instances of columns in this row will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    ::= { ipAddressPrefixEntry 3 }
+
+ipAddressPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The prefix length associated with this prefix.
+
+            The value 0 has no special meaning for this object.  It
+            simply refers to address '::/0'."
+    ::= { ipAddressPrefixEntry 4 }
+
+ipAddressPrefixOrigin OBJECT-TYPE
+    SYNTAX     IpAddressPrefixOriginTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The origin of this prefix."
+    ::= { ipAddressPrefixEntry 5 }
+
+ipAddressPrefixOnLinkFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "This object has the value 'true(1)', if this prefix can be
+            used for on-link determination; otherwise, the value is
+            'false(2)'.
+
+            The default for IPv4 prefixes is 'true(1)'."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 6 }
+
+ipAddressPrefixAutonomousFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "Autonomous address configuration flag.  When true(1),
+            indicates that this prefix can be used for autonomous
+            address configuration (i.e., can be used to form a local
+            interface address).  If false(2), it is not used to auto-
+            configure a local interface address.
+
+            The default for IPv4 prefixes is 'false(2)'."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 7 }
+
+ipAddressPrefixAdvPreferredLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remaining length of time, in seconds, that this prefix
+            will continue to be preferred, i.e., time until deprecation.
+
+            A value of 4,294,967,295 represents infinity.
+
+            The address generated from a deprecated prefix should no
+            longer be used as a source address in new communications,
+            but packets received on such an interface are processed as
+            expected.
+
+            The default for IPv4 prefixes is 4,294,967,295 (infinity)."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 8 }
+
+ipAddressPrefixAdvValidLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remaining length of time, in seconds, that this prefix
+            will continue to be valid, i.e., time until invalidation.  A
+            value of 4,294,967,295 represents infinity.
+
+            The address generated from an invalidated prefix should not
+            appear as the destination or source address of a packet.
+
+            The default for IPv4 prefixes is 4,294,967,295 (infinity)."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 9 }
+
+--
+-- Internet Address Table
+--
+
+ipAddressSpinLock OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An advisory lock used to allow cooperating SNMP managers to
+            coordinate their use of the set operation in creating or
+            modifying rows within this table.
+
+            In order to use this lock to coordinate the use of set
+            operations, managers should first retrieve
+            ipAddressTableSpinLock.  They should then determine the
+            appropriate row to create or modify.  Finally, they should
+            issue the appropriate set command, including the retrieved
+            value of ipAddressSpinLock.  If another manager has altered
+            the table in the meantime, then the value of
+            ipAddressSpinLock will have changed, and the creation will
+            fail as it will be specifying an incorrect value for
+            ipAddressSpinLock.  It is suggested, but not required, that
+            the ipAddressSpinLock be the first var bind for each set of
+            objects representing a 'row' in a PDU."
+    ::= { ip 33 }
+
+ipAddressTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains addressing information relevant to the
+            entity's interfaces.
+
+            This table does not contain multicast address information.
+            Tables for such information should be contained in multicast
+            specific MIBs, such as RFC 3019.
+
+            While this table is writable, the user will note that
+            several objects, such as ipAddressOrigin, are not.  The
+            intention in allowing a user to write to this table is to
+            allow them to add or remove any entry that isn't
+
+            permanent.  The user should be allowed to modify objects
+            and entries when that would not cause inconsistencies
+            within the table.  Allowing write access to objects, such
+            as ipAddressOrigin, could allow a user to insert an entry
+            and then label it incorrectly.
+
+            Note well: When including IPv6 link-local addresses in this
+            table, the entry must use an InetAddressType of 'ipv6z' in
+            order to differentiate between the possible interfaces."
+    ::= { ip 34 }
+
+ipAddressEntry OBJECT-TYPE
+    SYNTAX     IpAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An address mapping for a particular interface."
+    INDEX { ipAddressAddrType, ipAddressAddr }
+    ::= { ipAddressTable 1 }
+
+IpAddressEntry ::= SEQUENCE {
+        ipAddressAddrType     InetAddressType,
+        ipAddressAddr         InetAddress,
+        ipAddressIfIndex      InterfaceIndex,
+        ipAddressType         INTEGER,
+        ipAddressPrefix       RowPointer,
+        ipAddressOrigin       IpAddressOriginTC,
+        ipAddressStatus       IpAddressStatusTC,
+        ipAddressCreated      TimeStamp,
+        ipAddressLastChanged  TimeStamp,
+        ipAddressRowStatus    RowStatus,
+        ipAddressStorageType  StorageType
+    }
+
+ipAddressAddrType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of ipAddressAddr."
+    ::= { ipAddressEntry 1 }
+
+ipAddressAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP address to which this entry's addressing information
+
+            pertains.  The address type of this object is specified in
+            ipAddressAddrType.
+
+            Implementors need to be aware that if the size of
+            ipAddressAddr exceeds 116 octets, then OIDS of instances of
+            columns in this row will have more than 128 sub-identifiers
+            and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { ipAddressEntry 2 }
+
+ipAddressIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipAddressEntry 3 }
+
+ipAddressType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 unicast(1),
+                 anycast(2),
+                 broadcast(3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The type of address.  broadcast(3) is not a valid value for
+            IPv6 addresses (RFC 3513)."
+    DEFVAL { unicast }
+    ::= { ipAddressEntry 4 }
+
+ipAddressPrefix OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "A pointer to the row in the prefix table to which this
+            address belongs.  May be { 0 0 } if there is no such row."
+    DEFVAL { zeroDotZero }
+    ::= { ipAddressEntry 5 }
+
+ipAddressOrigin OBJECT-TYPE
+    SYNTAX     IpAddressOriginTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The origin of the address."
+    ::= { ipAddressEntry 6 }
+
+ipAddressStatus OBJECT-TYPE
+    SYNTAX     IpAddressStatusTC
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of the address, describing if the address can be
+            used for communication.
+
+            In the absence of other information, an IPv4 address is
+            always preferred(1)."
+    DEFVAL { preferred }
+    ::= { ipAddressEntry 7 }
+
+ipAddressCreated OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time this entry was created.
+            If this entry was created prior to the last re-
+            initialization of the local network management subsystem,
+            then this object contains a zero value."
+    ::= { ipAddressEntry 8 }
+
+ipAddressLastChanged OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time this entry was last
+            updated.  If this entry was updated prior to the last re-
+            initialization of the local network management subsystem,
+            then this object contains a zero value."
+    ::= { ipAddressEntry 9 }
+
+ipAddressRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+            The RowStatus TC requires that this DESCRIPTION clause
+            states under which circumstances other objects in this row
+
+            can be modified.  The value of this object has no effect on
+            whether other objects in this conceptual row can be
+            modified.
+
+            A conceptual row can not be made active until the
+            ipAddressIfIndex has been set to a valid index."
+    ::= { ipAddressEntry 10 }
+
+ipAddressStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The storage type for this conceptual row.  If this object
+            has a value of 'permanent', then no other objects are
+            required to be able to be modified."
+    DEFVAL { volatile }
+    ::= { ipAddressEntry 11 }
+
+--
+-- the Internet Address Translation table
+--
+
+ipNetToPhysicalTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpNetToPhysicalEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP Address Translation table used for mapping from IP
+            addresses to physical addresses.
+
+            The Address Translation tables contain the IP address to
+            'physical' address equivalences.  Some interfaces do not use
+            translation tables for determining address equivalences
+            (e.g., DDN-X.25 has an algorithmic method); if all
+            interfaces are of this type, then the Address Translation
+            table is empty, i.e., has zero entries.
+
+            While many protocols may be used to populate this table, ARP
+            and Neighbor Discovery are the most likely
+            options."
+    REFERENCE "RFC 826 and RFC 2461"
+    ::= { ip 35 }
+
+ipNetToPhysicalEntry OBJECT-TYPE
+    SYNTAX     IpNetToPhysicalEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Each entry contains one IP address to `physical' address
+            equivalence."
+    INDEX       { ipNetToPhysicalIfIndex,
+                  ipNetToPhysicalNetAddressType,
+                  ipNetToPhysicalNetAddress }
+    ::= { ipNetToPhysicalTable 1 }
+
+IpNetToPhysicalEntry ::= SEQUENCE {
+        ipNetToPhysicalIfIndex         InterfaceIndex,
+        ipNetToPhysicalNetAddressType  InetAddressType,
+        ipNetToPhysicalNetAddress      InetAddress,
+        ipNetToPhysicalPhysAddress     PhysAddress,
+        ipNetToPhysicalLastUpdated     TimeStamp,
+        ipNetToPhysicalType            INTEGER,
+        ipNetToPhysicalState           INTEGER,
+        ipNetToPhysicalRowStatus       RowStatus
+    }
+
+ipNetToPhysicalIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipNetToPhysicalEntry 1 }
+
+ipNetToPhysicalNetAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The type of ipNetToPhysicalNetAddress."
+    ::= { ipNetToPhysicalEntry 2 }
+
+ipNetToPhysicalNetAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP Address corresponding to the media-dependent
+            `physical' address.  The address type of this object is
+            specified in ipNetToPhysicalAddressType.
+
+            Implementors need to be aware that if the size of
+
+            ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of
+            instances of columns in this row will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    ::= { ipNetToPhysicalEntry 3 }
+
+ipNetToPhysicalPhysAddress OBJECT-TYPE
+    SYNTAX     PhysAddress (SIZE(0..65535))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The media-dependent `physical' address.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity SHOULD NOT save the
+            change to non-volatile storage."
+    ::= { ipNetToPhysicalEntry 4 }
+
+ipNetToPhysicalLastUpdated OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time this entry was last
+            updated.  If this entry was updated prior to the last re-
+            initialization of the local network management subsystem,
+            then this object contains a zero value."
+    ::= { ipNetToPhysicalEntry 5 }
+
+ipNetToPhysicalType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other(1),        -- none of the following
+                invalid(2),      -- an invalidated mapping
+                dynamic(3),
+                static(4),
+                local(5)         -- local interface
+            }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The type of mapping.
+
+            Setting this object to the value invalid(2) has the effect
+            of invalidating the corresponding entry in the
+            ipNetToPhysicalTable.  That is, it effectively dis-
+            associates the interface identified with said entry from the
+            mapping identified with said entry.  It is an
+            implementation-specific matter as to whether the agent
+
+            removes an invalidated entry from the table.  Accordingly,
+            management stations must be prepared to receive tabular
+            information from agents that corresponds to entries not
+            currently in use.  Proper interpretation of such entries
+            requires examination of the relevant ipNetToPhysicalType
+            object.
+
+            The 'dynamic(3)' type indicates that the IP address to
+            physical addresses mapping has been dynamically resolved
+            using e.g., IPv4 ARP or the IPv6 Neighbor Discovery
+            protocol.
+
+            The 'static(4)' type indicates that the mapping has been
+            statically configured.  Both of these refer to entries that
+            provide mappings for other entities addresses.
+
+            The 'local(5)' type indicates that the mapping is provided
+            for an entity's own interface address.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity SHOULD NOT save the
+            change to non-volatile storage."
+    DEFVAL { static }
+    ::= { ipNetToPhysicalEntry 6 }
+
+ipNetToPhysicalState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                     reachable(1), -- confirmed reachability
+
+                     stale(2),     -- unconfirmed reachability
+
+                     delay(3),     -- waiting for reachability
+                                   -- confirmation before entering
+                                   -- the probe state
+
+                     probe(4),     -- actively probing
+
+                     invalid(5),   -- an invalidated mapping
+
+                     unknown(6),   -- state can not be determined
+                                   -- for some reason.
+
+                     incomplete(7) -- address resolution is being
+                                   -- performed.
+                    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The Neighbor Unreachability Detection state for the
+            interface when the address mapping in this entry is used.
+            If Neighbor Unreachability Detection is not in use (e.g. for
+            IPv4), this object is always unknown(6)."
+    REFERENCE "RFC 2461"
+    ::= { ipNetToPhysicalEntry 7 }
+
+ipNetToPhysicalRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+            The RowStatus TC requires that this DESCRIPTION clause
+            states under which circumstances other objects in this row
+            can be modified.  The value of this object has no effect on
+            whether other objects in this conceptual row can be
+            modified.
+
+            A conceptual row can not be made active until the
+            ipNetToPhysicalPhysAddress object has been set.
+
+            Note that if the ipNetToPhysicalType is set to 'invalid',
+            the managed node may delete the entry independent of the
+            state of this object."
+    ::= { ipNetToPhysicalEntry 8 }
+
+--
+-- The IPv6 Scope Zone Index Table.
+--
+
+ipv6ScopeZoneIndexTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv6ScopeZoneIndexEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table used to describe IPv6 unicast and multicast scope
+            zones.
+
+            For those objects that have names rather than numbers, the
+            names were chosen to coincide with the names used in the
+            IPv6 address architecture document. "
+    REFERENCE "Section 2.7 of RFC 4291"
+    ::= { ip 36 }
+
+ipv6ScopeZoneIndexEntry OBJECT-TYPE
+    SYNTAX     Ipv6ScopeZoneIndexEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Each entry contains the list of scope identifiers on a given
+            interface."
+    INDEX { ipv6ScopeZoneIndexIfIndex }
+    ::= { ipv6ScopeZoneIndexTable 1 }
+
+Ipv6ScopeZoneIndexEntry ::= SEQUENCE {
+        ipv6ScopeZoneIndexIfIndex            InterfaceIndex,
+        ipv6ScopeZoneIndexLinkLocal          InetZoneIndex,
+        ipv6ScopeZoneIndex3                  InetZoneIndex,
+        ipv6ScopeZoneIndexAdminLocal         InetZoneIndex,
+        ipv6ScopeZoneIndexSiteLocal          InetZoneIndex,
+        ipv6ScopeZoneIndex6                  InetZoneIndex,
+        ipv6ScopeZoneIndex7                  InetZoneIndex,
+        ipv6ScopeZoneIndexOrganizationLocal  InetZoneIndex,
+        ipv6ScopeZoneIndex9                  InetZoneIndex,
+        ipv6ScopeZoneIndexA                  InetZoneIndex,
+        ipv6ScopeZoneIndexB                  InetZoneIndex,
+        ipv6ScopeZoneIndexC                  InetZoneIndex,
+        ipv6ScopeZoneIndexD                  InetZoneIndex
+    }
+
+ipv6ScopeZoneIndexIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which these scopes belong.  The interface identified by a
+            particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv6ScopeZoneIndexEntry 1 }
+
+ipv6ScopeZoneIndexLinkLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the link-local scope on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 2 }
+
+ipv6ScopeZoneIndex3 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 3 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 3 }
+
+ipv6ScopeZoneIndexAdminLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the admin-local scope on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 4 }
+
+ipv6ScopeZoneIndexSiteLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the site-local scope on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 5 }
+
+ipv6ScopeZoneIndex6 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 6 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 6 }
+
+ipv6ScopeZoneIndex7 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 7 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 7 }
+
+ipv6ScopeZoneIndexOrganizationLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the organization-local scope on this
+            interface."
+    ::= { ipv6ScopeZoneIndexEntry 8 }
+
+ipv6ScopeZoneIndex9 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 9 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 9 }
+
+ipv6ScopeZoneIndexA OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope A on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 10 }
+
+ipv6ScopeZoneIndexB OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope B on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 11 }
+
+ipv6ScopeZoneIndexC OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope C on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 12 }
+
+ipv6ScopeZoneIndexD OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope D on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 13 }
+
+--
+-- The Default Router Table
+-- This table simply lists the default routers; for more information
+-- about routing tables, see the routing MIBs
+--
+
+ipDefaultRouterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpDefaultRouterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table used to describe the default routers known to this
+
+            entity."
+    ::= { ip 37 }
+
+ipDefaultRouterEntry OBJECT-TYPE
+    SYNTAX     IpDefaultRouterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Each entry contains information about a default router known
+            to this entity."
+    INDEX {ipDefaultRouterAddressType, ipDefaultRouterAddress,
+           ipDefaultRouterIfIndex}
+    ::= { ipDefaultRouterTable 1 }
+
+IpDefaultRouterEntry ::= SEQUENCE {
+        ipDefaultRouterAddressType  InetAddressType,
+        ipDefaultRouterAddress      InetAddress,
+        ipDefaultRouterIfIndex      InterfaceIndex,
+        ipDefaultRouterLifetime     Unsigned32,
+        ipDefaultRouterPreference   INTEGER
+    }
+
+ipDefaultRouterAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type for this row."
+    ::= { ipDefaultRouterEntry 1 }
+
+ipDefaultRouterAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP address of the default router represented by this
+            row.  The address type of this object is specified in
+            ipDefaultRouterAddressType.
+
+            Implementers need to be aware that if the size of
+            ipDefaultRouterAddress exceeds 115 octets, then OIDS of
+            instances of columns in this row will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    ::= { ipDefaultRouterEntry 2 }
+
+ipDefaultRouterIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface by
+            which the router can be reached.  The interface identified
+            by a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipDefaultRouterEntry 3 }
+
+ipDefaultRouterLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remaining length of time, in seconds, that this router
+            will continue to be useful as a default router.  A value of
+            zero indicates that it is no longer useful as a default
+            router.  It is left to the implementer of the MIB as to
+            whether a router with a lifetime of zero is removed from the
+            list.
+
+            For IPv6, this value should be extracted from the router
+            advertisement messages."
+    REFERENCE "For IPv6 RFC 2462 sections 4.2 and 6.3.4"
+    ::= { ipDefaultRouterEntry 4 }
+
+ipDefaultRouterPreference OBJECT-TYPE
+    SYNTAX     INTEGER {
+                     reserved (-2),
+                     low (-1),
+                     medium (0),
+                     high (1)
+                    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "An indication of preference given to this router as a
+            default router as described in he Default Router
+            Preferences document.  Treating the value as a
+            2 bit signed integer allows for simple arithmetic
+            comparisons.
+
+            For IPv4 routers or IPv6 routers that are not using the
+            updated router advertisement format, this object is set to
+            medium (0)."
+    REFERENCE "RFC 4291, section 2.1"
+    ::= { ipDefaultRouterEntry 5 }
+
+--
+-- Configuration information for constructing router advertisements
+--
+
+ipv6RouterAdvertSpinLock OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An advisory lock used to allow cooperating SNMP managers to
+            coordinate their use of the set operation in creating or
+            modifying rows within this table.
+
+            In order to use this lock to coordinate the use of set
+            operations, managers should first retrieve
+            ipv6RouterAdvertSpinLock.  They should then determine the
+            appropriate row to create or modify.  Finally, they should
+            issue the appropriate set command including the retrieved
+            value of ipv6RouterAdvertSpinLock.  If another manager has
+            altered the table in the meantime, then the value of
+            ipv6RouterAdvertSpinLock will have changed and the creation
+            will fail as it will be specifying an incorrect value for
+            ipv6RouterAdvertSpinLock.  It is suggested, but not
+            required, that the ipv6RouterAdvertSpinLock be the first var
+            bind for each set of objects representing a 'row' in a PDU."
+    ::= { ip 38 }
+
+ipv6RouterAdvertTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv6RouterAdvertEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing information used to construct router
+            advertisements."
+    ::= { ip 39 }
+
+ipv6RouterAdvertEntry OBJECT-TYPE
+    SYNTAX     Ipv6RouterAdvertEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing information used to construct router
+            advertisements.
+
+            Information in this table is persistent, and when this
+            object is written, the entity SHOULD save the change to
+            non-volatile storage."
+    INDEX { ipv6RouterAdvertIfIndex }
+    ::= { ipv6RouterAdvertTable 1 }
+
+Ipv6RouterAdvertEntry ::= SEQUENCE {
+        ipv6RouterAdvertIfIndex          InterfaceIndex,
+        ipv6RouterAdvertSendAdverts      TruthValue,
+        ipv6RouterAdvertMaxInterval      Unsigned32,
+        ipv6RouterAdvertMinInterval      Unsigned32,
+        ipv6RouterAdvertManagedFlag      TruthValue,
+        ipv6RouterAdvertOtherConfigFlag  TruthValue,
+        ipv6RouterAdvertLinkMTU          Unsigned32,
+        ipv6RouterAdvertReachableTime    Unsigned32,
+        ipv6RouterAdvertRetransmitTime   Unsigned32,
+        ipv6RouterAdvertCurHopLimit      Unsigned32,
+        ipv6RouterAdvertDefaultLifetime  Unsigned32,
+        ipv6RouterAdvertRowStatus        RowStatus
+    }
+
+ipv6RouterAdvertIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface on
+            which router advertisements constructed with this
+            information will be transmitted.  The interface identified
+            by a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv6RouterAdvertEntry 1 }
+
+ipv6RouterAdvertSendAdverts OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "A flag indicating whether the router sends periodic
+            router advertisements and responds to router solicitations
+            on this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { false }
+    ::= { ipv6RouterAdvertEntry 2 }
+
+ipv6RouterAdvertMaxInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (4..1800)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The maximum time allowed between sending unsolicited router
+
+            advertisements from this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 600 }
+    ::= { ipv6RouterAdvertEntry 3 }
+
+ipv6RouterAdvertMinInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (3..1350)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The minimum time allowed between sending unsolicited router
+            advertisements from this interface.
+
+            The default is 0.33 * ipv6RouterAdvertMaxInterval, however,
+            in the case of a low value for ipv6RouterAdvertMaxInterval,
+            the minimum value for this object is restricted to 3."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    ::= { ipv6RouterAdvertEntry 4 }
+
+ipv6RouterAdvertManagedFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The true/false value to be placed into the 'managed address
+            configuration' flag field in router advertisements sent from
+            this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { false }
+    ::= { ipv6RouterAdvertEntry 5 }
+
+ipv6RouterAdvertOtherConfigFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The true/false value to be placed into the 'other stateful
+            configuration' flag field in router advertisements sent from
+            this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { false }
+    ::= { ipv6RouterAdvertEntry 6 }
+
+ipv6RouterAdvertLinkMTU OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in MTU options sent by the router on
+            this interface.
+
+            A value of zero indicates that no MTU options are sent."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 0 }
+    ::= { ipv6RouterAdvertEntry 7 }
+
+ipv6RouterAdvertReachableTime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..3600000)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in the reachable time field in router
+            advertisement messages sent from this interface.
+
+            A value of zero in the router advertisement indicates that
+            the advertisement isn't specifying a value for reachable
+            time."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 0 }
+    ::= { ipv6RouterAdvertEntry 8 }
+
+ipv6RouterAdvertRetransmitTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in the retransmit timer field in
+            router advertisements sent from this interface.
+
+            A value of zero in the router advertisement indicates that
+            the advertisement isn't specifying a value for retrans
+            time."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 0 }
+    ::= { ipv6RouterAdvertEntry 9 }
+
+ipv6RouterAdvertCurHopLimit OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The default value to be placed in the current hop limit
+            field in router advertisements sent from this interface.
+
+            The value should be set to the current diameter of the
+            Internet.
+
+            A value of zero in the router advertisement indicates that
+            the advertisement isn't specifying a value for curHopLimit.
+
+            The default should be set to the value specified in the IANA
+            web pages (www.iana.org) at the time of implementation."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    ::= { ipv6RouterAdvertEntry 10 }
+
+ipv6RouterAdvertDefaultLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0|4..9000)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in the router lifetime field of
+            router advertisements sent from this interface.  This value
+            MUST be either 0 or between ipv6RouterAdvertMaxInterval and
+            9000 seconds.
+
+            A value of zero indicates that the router is not to be used
+            as a default router.
+
+            The default is 3 * ipv6RouterAdvertMaxInterval."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    ::= { ipv6RouterAdvertEntry 11 }
+
+ipv6RouterAdvertRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+            As all objects in this conceptual row have default values, a
+            row can be created and made active by setting this object
+            appropriately.
+
+            The RowStatus TC requires that this DESCRIPTION clause
+            states under which circumstances other objects in this row
+            can be modified.  The value of this object has no effect on
+            whether other objects in this conceptual row can be
+            modified."
+    ::= { ipv6RouterAdvertEntry 12 }
+
+--
+
+-- ICMP section
+--
+
+icmp     OBJECT IDENTIFIER ::= { mib-2 5 }
+
+--
+-- ICMP non-message-specific counters
+--
+
+-- These object IDs are reserved, as they were used in earlier
+-- versions of the MIB module.  In theory, OIDs are not assigned
+-- until the specification is released as an RFC; however, as some
+-- companies may have shipped code based on earlier versions of
+-- the MIB, it seems best to reserve these OIDs.
+-- ::= { icmp 27 }
+-- ::= { icmp 28 }
+
+icmpStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IcmpStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table of generic system-wide ICMP counters."
+    ::= { icmp 29 }
+
+icmpStatsEntry OBJECT-TYPE
+    SYNTAX     IcmpStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A conceptual row in the icmpStatsTable."
+    INDEX    { icmpStatsIPVersion }
+    ::= { icmpStatsTable 1 }
+
+IcmpStatsEntry ::= SEQUENCE {
+        icmpStatsIPVersion  InetVersion,
+        icmpStatsInMsgs     Counter32,
+        icmpStatsInErrors   Counter32,
+        icmpStatsOutMsgs    Counter32,
+        icmpStatsOutErrors  Counter32
+    }
+
+icmpStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of the statistics."
+    ::= { icmpStatsEntry 1 }
+
+icmpStatsInMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of ICMP messages that the entity received.
+            Note that this counter includes all those counted by
+            icmpStatsInErrors."
+    ::= { icmpStatsEntry 2 }
+
+icmpStatsInErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of ICMP messages that the entity received but
+            determined as having ICMP-specific errors (bad ICMP
+            checksums, bad length, etc.)."
+    ::= { icmpStatsEntry 3 }
+
+icmpStatsOutMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of ICMP messages that the entity attempted
+            to send.  Note that this counter includes all those counted
+            by icmpStatsOutErrors."
+    ::= { icmpStatsEntry 4 }
+
+icmpStatsOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of ICMP messages that this entity did not send
+            due to problems discovered within ICMP, such as a lack of
+            buffers.  This value should not include errors discovered
+            outside the ICMP layer, such as the inability of IP to route
+            the resultant datagram.  In some implementations, there may
+            be no types of error that contribute to this counter's
+            value."
+    ::= { icmpStatsEntry 5 }
+
+--
+-- per-version, per-message type ICMP counters
+
+--
+
+icmpMsgStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IcmpMsgStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table of system-wide per-version, per-message type ICMP
+            counters."
+    ::= { icmp 30 }
+
+icmpMsgStatsEntry OBJECT-TYPE
+    SYNTAX     IcmpMsgStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A conceptual row in the icmpMsgStatsTable.
+
+            The system should track each ICMP type value, even if that
+            ICMP type is not supported by the system.  However, a
+            given row need not be instantiated unless a message of that
+            type has been processed, i.e., the row for
+            icmpMsgStatsType=X MAY be instantiated before but MUST be
+            instantiated after the first message with Type=X is
+            received or transmitted.  After receiving or transmitting
+            any succeeding messages with Type=X, the relevant counter
+            must be incremented."
+    INDEX { icmpMsgStatsIPVersion, icmpMsgStatsType }
+    ::= { icmpMsgStatsTable 1 }
+
+IcmpMsgStatsEntry ::= SEQUENCE {
+        icmpMsgStatsIPVersion  InetVersion,
+        icmpMsgStatsType       Integer32,
+        icmpMsgStatsInPkts     Counter32,
+        icmpMsgStatsOutPkts    Counter32
+    }
+
+icmpMsgStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of the statistics."
+    ::= { icmpMsgStatsEntry 1 }
+
+icmpMsgStatsType OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The ICMP type field of the message type being counted by
+            this row.
+
+            Note that ICMP message types are scoped by the address type
+            in use."
+    REFERENCE "http://www.iana.org/assignments/icmp-parameters and
+               http://www.iana.org/assignments/icmpv6-parameters"
+    ::= { icmpMsgStatsEntry 2 }
+
+icmpMsgStatsInPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input packets for this AF and type."
+    ::= { icmpMsgStatsEntry 3 }
+
+icmpMsgStatsOutPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output packets for this AF and type."
+    ::= { icmpMsgStatsEntry 4 }
+--
+-- conformance information
+--
+
+ipMIBConformance OBJECT IDENTIFIER ::= { ipMIB 2 }
+
+ipMIBCompliances OBJECT IDENTIFIER ::= { ipMIBConformance 1 }
+ipMIBGroups      OBJECT IDENTIFIER ::= { ipMIBConformance 2 }
+
+-- compliance statements
+ipMIBCompliance2 MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+            "The compliance statement for systems that implement IP -
+             either IPv4 or IPv6.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2, but
+            for which we have the following compliance requirements,
+            expressed in OBJECT clause form in this description
+            clause:
+
+            -- OBJECT        ipSystemStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        ipIfStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        icmpStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        icmpMsgStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        ipAddressPrefixType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4 and
+            --     IPv6 address types.
+            --
+            -- OBJECT        ipAddressPrefixPrefix
+            -- SYNTAX        InetAddress (Size(4 | 16))
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4 and
+            --     IPv6 addresses and so the size can be either 4 or
+            --     16 bytes.
+            --
+            -- OBJECT        ipAddressAddrType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2),
+            --                                ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 address types.
+            --
+            -- OBJECT        ipAddressAddr
+            -- SYNTAX        InetAddress (Size(4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+
+            --     non-global IPv4 and IPv6 addresses and so the size
+            --     can be 4, 8, 16, or 20 bytes.
+            --
+            -- OBJECT        ipNetToPhysicalNetAddressType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2),
+            --                                ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 address types.
+            --
+            -- OBJECT        ipNetToPhysicalNetAddress
+            -- SYNTAX        InetAddress (Size(4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 addresses and so the size
+            --     can be 4, 8, 16, or 20 bytes.
+            --
+            -- OBJECT        ipDefaultRouterAddressType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2),
+            --                                ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 address types.
+            --
+            -- OBJECT        ipDefaultRouterAddress
+            -- SYNTAX        InetAddress (Size(4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 addresses and so the size
+            --     can be 4, 8, 16, or 20 bytes."
+
+    MODULE -- this module
+
+    MANDATORY-GROUPS { ipSystemStatsGroup,   ipAddressGroup,
+                       ipNetToPhysicalGroup, ipDefaultRouterGroup,
+                       icmpStatsGroup }
+
+    GROUP ipSystemStatsHCOctetGroup
+    DESCRIPTION
+           "This group is mandatory for systems that have an aggregate
+            bandwidth of greater than 20MB.  Including this group does
+            not allow an entity to neglect the 32 bit versions of these
+            objects."
+
+    GROUP ipSystemStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for systems that have an aggregate
+            bandwidth of greater than 650MB.  Including this group
+
+            does not allow an entity to neglect the 32 bit versions of
+            these objects."
+
+    GROUP ipIfStatsGroup
+    DESCRIPTION
+           "This group is optional for all systems."
+
+    GROUP ipIfStatsHCOctetGroup
+    DESCRIPTION
+           "This group is mandatory for systems that include the
+            ipIfStatsGroup and include links with bandwidths of greater
+            than 20MB.  Including this group does not allow an entity to
+            neglect the 32 bit versions of these objects."
+
+    GROUP ipIfStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for systems that include the
+            ipIfStatsGroup and include links with bandwidths of greater
+            than 650MB.  Including this group does not allow an entity
+            to neglect the 32 bit versions of these objects."
+
+    GROUP ipv4GeneralGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4."
+
+    GROUP ipv4IfGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4."
+
+    GROUP ipv4SystemStatsGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4."
+
+    GROUP ipv4SystemStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4 and
+            that have an aggregate bandwidth of greater than 650MB.
+            Including this group does not allow an entity to neglect the
+            32 bit versions of these objects."
+
+    GROUP ipv4IfStatsGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4 and
+            including the ipIfStatsGroup."
+
+    GROUP ipv4IfStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4 and
+
+            including the ipIfStatsHCPacketGroup.  Including this group
+            does not allow an entity to neglect the 32 bit versions of
+            these objects."
+
+    GROUP ipv6GeneralGroup2
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipv6IfGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipAddressPrefixGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipv6ScopeGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipv6RouterAdvertGroup
+    DESCRIPTION
+           "This group is mandatory for all IPv6 routers."
+
+    GROUP ipLastChangeGroup
+    DESCRIPTION
+           "This group is optional for all agents."
+
+    OBJECT     ipv6IpForwarding
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6IpDefaultHopLimit
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv4InterfaceEnableStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6InterfaceEnableStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6InterfaceForwarding
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipAddressSpinLock
+    MIN-ACCESS not-accessible
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object.  However, if an agent provides write access to any
+            of the other objects in the ipAddressGroup, it SHOULD
+            provide write access to this object as well."
+
+    OBJECT     ipAddressIfIndex
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressType
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressRowStatus
+    SYNTAX     RowStatus { active(1) }
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressStorageType
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object.
+
+            If an agent allows this object to be written or created, it
+            is not required to allow this object to be set to readOnly,
+            permanent, or nonVolatile."
+
+    OBJECT     ipNetToPhysicalPhysAddress
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipNetToPhysicalType
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipv6RouterAdvertSpinLock
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object.  However, if an agent provides write access to
+            any of the other objects in the ipv6RouterAdvertGroup, it
+            SHOULD provide write access to this object as well."
+
+    OBJECT     ipv6RouterAdvertSendAdverts
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertMaxInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertMinInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertManagedFlag
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertOtherConfigFlag
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertLinkMTU
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertReachableTime
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertRetransmitTime
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertCurHopLimit
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertDefaultLifetime
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+    ::= { ipMIBCompliances 2 }
+
+-- units of conformance
+
+ipv4GeneralGroup OBJECT-GROUP
+    OBJECTS   { ipForwarding, ipDefaultTTL, ipReasmTimeout }
+    STATUS     current
+    DESCRIPTION
+           "The group of IPv4-specific objects for basic management of
+            IPv4 entities."
+    ::= { ipMIBGroups 3 }
+
+ipv4IfGroup OBJECT-GROUP
+    OBJECTS   { ipv4InterfaceReasmMaxSize, ipv4InterfaceEnableStatus,
+                ipv4InterfaceRetransmitTime }
+    STATUS     current
+    DESCRIPTION
+           "The group of IPv4-specific objects for basic management of
+            IPv4 interfaces."
+    ::= { ipMIBGroups 4 }
+
+ipv6GeneralGroup2 OBJECT-GROUP
+    OBJECTS { ipv6IpForwarding, ipv6IpDefaultHopLimit }
+    STATUS     current
+    DESCRIPTION
+           "The IPv6 group of objects providing for basic management of
+            IPv6 entities."
+    ::= { ipMIBGroups 5 }
+
+ipv6IfGroup OBJECT-GROUP
+    OBJECTS   { ipv6InterfaceReasmMaxSize,   ipv6InterfaceIdentifier,
+                ipv6InterfaceEnableStatus,   ipv6InterfaceReachableTime,
+                ipv6InterfaceRetransmitTime, ipv6InterfaceForwarding }
+    STATUS     current
+    DESCRIPTION
+           "The group of IPv6-specific objects for basic management of
+            IPv6 interfaces."
+    ::= { ipMIBGroups 6 }
+
+ipLastChangeGroup OBJECT-GROUP
+    OBJECTS   { ipv4InterfaceTableLastChange,
+                ipv6InterfaceTableLastChange,
+                ipIfStatsTableLastChange }
+    STATUS     current
+    DESCRIPTION
+           "The last change objects associated with this MIB.  These
+            objects are optional for all agents.  They SHOULD be
+            implemented on agents where it is possible to determine the
+            proper values.  Where it is not possible to determine the
+            proper values, for example when the tables are split amongst
+            several sub-agents using AgentX, the agent MUST NOT
+            implement these objects to return an incorrect or static
+            value."
+    ::= { ipMIBGroups 7 }
+
+ipSystemStatsGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsInReceives,
+                ipSystemStatsInOctets,
+                ipSystemStatsInHdrErrors,
+                ipSystemStatsInNoRoutes,
+                ipSystemStatsInAddrErrors,
+                ipSystemStatsInUnknownProtos,
+                ipSystemStatsInTruncatedPkts,
+                ipSystemStatsInForwDatagrams,
+                ipSystemStatsReasmReqds,
+                ipSystemStatsReasmOKs,
+                ipSystemStatsReasmFails,
+                ipSystemStatsInDiscards,
+                ipSystemStatsInDelivers,
+                ipSystemStatsOutRequests,
+                ipSystemStatsOutNoRoutes,
+                ipSystemStatsOutForwDatagrams,
+                ipSystemStatsOutDiscards,
+                ipSystemStatsOutFragReqds,
+                ipSystemStatsOutFragOKs,
+                ipSystemStatsOutFragFails,
+                ipSystemStatsOutFragCreates,
+                ipSystemStatsOutTransmits,
+                ipSystemStatsOutOctets,
+                ipSystemStatsInMcastPkts,
+                ipSystemStatsInMcastOctets,
+                ipSystemStatsOutMcastPkts,
+                ipSystemStatsOutMcastOctets,
+                ipSystemStatsDiscontinuityTime,
+                ipSystemStatsRefreshRate }
+    STATUS     current
+    DESCRIPTION
+           "IP system wide statistics."
+    ::= { ipMIBGroups 8 }
+
+ipv4SystemStatsGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsInBcastPkts, ipSystemStatsOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only system wide statistics."
+    ::= { ipMIBGroups 9 }
+
+ipSystemStatsHCOctetGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsHCInOctets,
+                ipSystemStatsHCOutOctets,
+                ipSystemStatsHCInMcastOctets,
+                ipSystemStatsHCOutMcastOctets
+}
+    STATUS     current
+    DESCRIPTION
+           "IP system wide statistics for systems that may overflow the
+            standard octet counters within 1 hour."
+    ::= { ipMIBGroups 10 }
+
+ipSystemStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsHCInReceives,
+                ipSystemStatsHCInForwDatagrams,
+                ipSystemStatsHCInDelivers,
+                ipSystemStatsHCOutRequests,
+                ipSystemStatsHCOutForwDatagrams,
+                ipSystemStatsHCOutTransmits,
+                ipSystemStatsHCInMcastPkts,
+                ipSystemStatsHCOutMcastPkts
+}
+    STATUS     current
+    DESCRIPTION
+           "IP system wide statistics for systems that may overflow the
+            standard packet counters within 1 hour."
+    ::= { ipMIBGroups 11 }
+
+ipv4SystemStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsHCInBcastPkts,
+                ipSystemStatsHCOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only system wide statistics for systems that may
+            overflow the standard packet counters within 1 hour."
+    ::= { ipMIBGroups 12 }
+
+ipIfStatsGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsInReceives,        ipIfStatsInOctets,
+                ipIfStatsInHdrErrors,       ipIfStatsInNoRoutes,
+                ipIfStatsInAddrErrors,      ipIfStatsInUnknownProtos,
+                ipIfStatsInTruncatedPkts,   ipIfStatsInForwDatagrams,
+                ipIfStatsReasmReqds,        ipIfStatsReasmOKs,
+                ipIfStatsReasmFails,        ipIfStatsInDiscards,
+                ipIfStatsInDelivers,        ipIfStatsOutRequests,
+                ipIfStatsOutForwDatagrams,  ipIfStatsOutDiscards,
+                ipIfStatsOutFragReqds,      ipIfStatsOutFragOKs,
+                ipIfStatsOutFragFails,      ipIfStatsOutFragCreates,
+                ipIfStatsOutTransmits,      ipIfStatsOutOctets,
+                ipIfStatsInMcastPkts,       ipIfStatsInMcastOctets,
+                ipIfStatsOutMcastPkts,      ipIfStatsOutMcastOctets,
+                ipIfStatsDiscontinuityTime, ipIfStatsRefreshRate }
+    STATUS     current
+    DESCRIPTION
+           "IP per-interface statistics."
+    ::= { ipMIBGroups 13 }
+
+ipv4IfStatsGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsInBcastPkts, ipIfStatsOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only per-interface statistics."
+    ::= { ipMIBGroups 14 }
+
+ipIfStatsHCOctetGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsHCInOctets,      ipIfStatsHCOutOctets,
+                ipIfStatsHCInMcastOctets, ipIfStatsHCOutMcastOctets }
+    STATUS     current
+    DESCRIPTION
+           "IP per-interfaces statistics for systems that include
+            interfaces that may overflow the standard octet
+            counters within 1 hour."
+    ::= { ipMIBGroups 15 }
+
+ipIfStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsHCInReceives,       ipIfStatsHCInForwDatagrams,
+                ipIfStatsHCInDelivers,       ipIfStatsHCOutRequests,
+                ipIfStatsHCOutForwDatagrams, ipIfStatsHCOutTransmits,
+                ipIfStatsHCInMcastPkts,      ipIfStatsHCOutMcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IP per-interfaces statistics for systems that include
+            interfaces that may overflow the standard packet counters
+            within 1 hour."
+    ::= { ipMIBGroups 16 }
+
+ipv4IfStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsHCInBcastPkts, ipIfStatsHCOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only per-interface statistics for systems that include
+            interfaces that may overflow the standard packet counters
+            within 1 hour."
+    ::= { ipMIBGroups 17 }
+
+ipAddressPrefixGroup OBJECT-GROUP
+    OBJECTS   { ipAddressPrefixOrigin,
+                ipAddressPrefixOnLinkFlag,
+                ipAddressPrefixAutonomousFlag,
+                ipAddressPrefixAdvPreferredLifetime,
+                ipAddressPrefixAdvValidLifetime }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about address
+            prefixes used by this node."
+    ::= { ipMIBGroups 18 }
+
+ipAddressGroup OBJECT-GROUP
+    OBJECTS   { ipAddressSpinLock,  ipAddressIfIndex,
+                ipAddressType,      ipAddressPrefix,
+                ipAddressOrigin,    ipAddressStatus,
+                ipAddressCreated,   ipAddressLastChanged,
+                ipAddressRowStatus, ipAddressStorageType }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about the
+            addresses relevant to this entity's interfaces."
+    ::= { ipMIBGroups 19 }
+
+ipNetToPhysicalGroup OBJECT-GROUP
+    OBJECTS   { ipNetToPhysicalPhysAddress, ipNetToPhysicalLastUpdated,
+                ipNetToPhysicalType,        ipNetToPhysicalState,
+                ipNetToPhysicalRowStatus }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about the
+            mappings of network address to physical address known to
+            this node."
+    ::= { ipMIBGroups 20 }
+
+ipv6ScopeGroup OBJECT-GROUP
+    OBJECTS   { ipv6ScopeZoneIndexLinkLocal,
+                ipv6ScopeZoneIndex3,
+                ipv6ScopeZoneIndexAdminLocal,
+                ipv6ScopeZoneIndexSiteLocal,
+                ipv6ScopeZoneIndex6,
+                ipv6ScopeZoneIndex7,
+                ipv6ScopeZoneIndexOrganizationLocal,
+                ipv6ScopeZoneIndex9,
+                ipv6ScopeZoneIndexA,
+                ipv6ScopeZoneIndexB,
+                ipv6ScopeZoneIndexC,
+                ipv6ScopeZoneIndexD }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for managing IPv6 scope zones."
+    ::= { ipMIBGroups 21 }
+
+ipDefaultRouterGroup OBJECT-GROUP
+    OBJECTS   { ipDefaultRouterLifetime, ipDefaultRouterPreference }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about default
+            routers known to this node."
+    ::= { ipMIBGroups 22 }
+
+ipv6RouterAdvertGroup OBJECT-GROUP
+    OBJECTS   { ipv6RouterAdvertSpinLock,
+                ipv6RouterAdvertSendAdverts,
+                ipv6RouterAdvertMaxInterval,
+                ipv6RouterAdvertMinInterval,
+                ipv6RouterAdvertManagedFlag,
+                ipv6RouterAdvertOtherConfigFlag,
+                ipv6RouterAdvertLinkMTU,
+                ipv6RouterAdvertReachableTime,
+                ipv6RouterAdvertRetransmitTime,
+                ipv6RouterAdvertCurHopLimit,
+                ipv6RouterAdvertDefaultLifetime,
+                ipv6RouterAdvertRowStatus
+}
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for controlling information advertised
+            by IPv6 routers."
+    ::= { ipMIBGroups 23 }
+
+icmpStatsGroup OBJECT-GROUP
+    OBJECTS   {icmpStatsInMsgs,    icmpStatsInErrors,
+               icmpStatsOutMsgs,   icmpStatsOutErrors,
+               icmpMsgStatsInPkts, icmpMsgStatsOutPkts }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing ICMP statistics."
+    ::= { ipMIBGroups 24 }
+
+--
+-- Deprecated objects
+--
+
+ipInReceives OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of input datagrams received from
+            interfaces, including those received in error.
+
+            This object has been deprecated, as a new IP version-neutral
+
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInRecieves."
+    ::= { ip 3 }
+
+ipInHdrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input datagrams discarded due to errors in
+            their IPv4 headers, including bad checksums, version number
+            mismatch, other format errors, time-to-live exceeded, errors
+            discovered in processing their IPv4 options, etc.
+
+            This object has been deprecated as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInHdrErrors."
+    ::= { ip 4 }
+
+ipInAddrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input datagrams discarded because the IPv4
+            address in their IPv4 header's destination field was not a
+            valid address to be received at this entity.  This count
+            includes invalid addresses (e.g., 0.0.0.0) and addresses of
+            unsupported Classes (e.g., Class E).  For entities which are
+            not IPv4 routers, and therefore do not forward datagrams,
+            this counter includes datagrams discarded because the
+            destination address was not a local address.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInAddrErrors."
+    ::= { ip 5 }
+
+ipForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IPv4 destination, as a result of which an
+            attempt was made to find a route to forward them to that
+            final destination.  In entities which do not act as IPv4
+            routers, this counter will include only those packets which
+
+            were Source-Routed via this entity, and the Source-Route
+            option processing was successful.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInForwDatagrams."
+    ::= { ip 6 }
+
+ipInUnknownProtos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of locally-addressed datagrams received
+            successfully but discarded because of an unknown or
+            unsupported protocol.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInUnknownProtos."
+    ::= { ip 7 }
+
+ipInDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input IPv4 datagrams for which no problems
+            were encountered to prevent their continued processing, but
+            which were discarded (e.g., for lack of buffer space).  Note
+            that this counter does not include any datagrams discarded
+            while awaiting re-assembly.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInDiscards."
+    ::= { ip 8 }
+
+ipInDelivers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of input datagrams successfully delivered
+            to IPv4 user-protocols (including ICMP).
+
+            This object has been deprecated as a new IP version neutral
+            table has been added.  It is loosely replaced by
+
+            ipSystemStatsIndelivers."
+    ::= { ip 9 }
+
+ipOutRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of IPv4 datagrams which local IPv4 user
+            protocols (including ICMP) supplied to IPv4 in requests for
+            transmission.  Note that this counter does not include any
+            datagrams counted in ipForwDatagrams.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutRequests."
+    ::= { ip 10 }
+
+ipOutDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of output IPv4 datagrams for which no problem was
+            encountered to prevent their transmission to their
+            destination, but which were discarded (e.g., for lack of
+            buffer space).  Note that this counter would include
+            datagrams counted in ipForwDatagrams if any such packets met
+            this (discretionary) discard criterion.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutDiscards."
+    ::= { ip 11 }
+
+ipOutNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams discarded because no route
+            could be found to transmit them to their destination.  Note
+            that this counter includes any packets counted in
+            ipForwDatagrams which meet this `no-route' criterion.  Note
+            that this includes any datagrams which a host cannot route
+            because all of its default routers are down.
+
+            This object has been deprecated, as a new IP version-neutral
+
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutNoRoutes."
+    ::= { ip 12 }
+
+ipReasmReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 fragments received which needed to be
+            reassembled at this entity.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsReasmReqds."
+    ::= { ip 14 }
+
+ipReasmOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams successfully re-assembled.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsReasmOKs."
+    ::= { ip 15 }
+
+ipReasmFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of failures detected by the IPv4 re-assembly
+            algorithm (for whatever reason: timed out, errors, etc).
+            Note that this is not necessarily a count of discarded IPv4
+            fragments since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments by
+            combining them as they are received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsReasmFails."
+    ::= { ip 16 }
+
+ipFragOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams that have been successfully
+            fragmented at this entity.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutFragOKs."
+    ::= { ip 17 }
+
+ipFragFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams that have been discarded
+            because they needed to be fragmented at this entity but
+            could not be, e.g., because their Don't Fragment flag was
+            set.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutFragFails."
+    ::= { ip 18 }
+
+ipFragCreates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagram fragments that have been
+            generated as a result of fragmentation at this entity.
+
+            This object has been deprecated as a new IP version neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutFragCreates."
+    ::= { ip 19 }
+
+ipRoutingDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of routing entries which were chosen to be
+            discarded even though they are valid.  One possible reason
+            for discarding such an entry could be to free-up buffer
+            space for other routing entries.
+
+            This object was defined in pre-IPv6 versions of the IP MIB.
+            It was implicitly IPv4 only, but the original specifications
+            did not indicate this protocol restriction.  In order to
+            clarify the specifications, this object has been deprecated
+            and a similar, but more thoroughly clarified, object has
+            been added to the IP-FORWARD-MIB."
+    ::= { ip 23 }
+
+-- the deprecated IPv4 address table
+
+ipAddrTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpAddrEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The table of addressing information relevant to this
+            entity's IPv4 addresses.
+
+            This table has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by the
+            ipAddressTable although several objects that weren't deemed
+            useful weren't carried forward while another
+            (ipAdEntReasmMaxSize) was moved to the ipv4InterfaceTable."
+    ::= { ip 20 }
+
+ipAddrEntry OBJECT-TYPE
+    SYNTAX     IpAddrEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The addressing information for one of this entity's IPv4
+            addresses."
+    INDEX      { ipAdEntAddr }
+    ::= { ipAddrTable 1 }
+
+IpAddrEntry ::= SEQUENCE {
+        ipAdEntAddr          IpAddress,
+        ipAdEntIfIndex       INTEGER,
+        ipAdEntNetMask       IpAddress,
+        ipAdEntBcastAddr     INTEGER,
+        ipAdEntReasmMaxSize  INTEGER
+    }
+
+ipAdEntAddr OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The IPv4 address to which this entry's addressing
+            information pertains."
+    ::= { ipAddrEntry 1 }
+
+ipAdEntIfIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The index value which uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipAddrEntry 2 }
+
+ipAdEntNetMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The subnet mask associated with the IPv4 address of this
+            entry.  The value of the mask is an IPv4 address with all
+            the network bits set to 1 and all the hosts bits set to 0."
+    ::= { ipAddrEntry 3 }
+
+ipAdEntBcastAddr OBJECT-TYPE
+    SYNTAX     INTEGER (0..1)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The value of the least-significant bit in the IPv4 broadcast
+            address used for sending datagrams on the (logical)
+            interface associated with the IPv4 address of this entry.
+            For example, when the Internet standard all-ones broadcast
+            address is used, the value will be 1.  This value applies to
+            both the subnet and network broadcast addresses used by the
+            entity on this (logical) interface."
+    ::= { ipAddrEntry 4 }
+
+ipAdEntReasmMaxSize OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The size of the largest IPv4 datagram which this entity can
+            re-assemble from incoming IPv4 fragmented datagrams received
+            on this interface."
+    ::= { ipAddrEntry 5 }
+
+-- the deprecated IPv4 Address Translation table
+
+-- The Address Translation tables contain the IpAddress to
+-- "physical" address equivalences.  Some interfaces do not
+-- use translation tables for determining address
+-- equivalences (e.g., DDN-X.25 has an algorithmic method);
+-- if all interfaces are of this type, then the Address
+-- Translation table is empty, i.e., has zero entries.
+
+ipNetToMediaTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpNetToMediaEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The IPv4 Address Translation table used for mapping from
+            IPv4 addresses to physical addresses.
+
+            This table has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by the
+            ipNetToPhysicalTable."
+    ::= { ip 22 }
+
+ipNetToMediaEntry OBJECT-TYPE
+    SYNTAX     IpNetToMediaEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "Each entry contains one IpAddress to `physical' address
+            equivalence."
+    INDEX       { ipNetToMediaIfIndex,
+                  ipNetToMediaNetAddress }
+    ::= { ipNetToMediaTable 1 }
+
+IpNetToMediaEntry ::= SEQUENCE {
+        ipNetToMediaIfIndex      INTEGER,
+        ipNetToMediaPhysAddress  PhysAddress,
+        ipNetToMediaNetAddress   IpAddress,
+        ipNetToMediaType         INTEGER
+    }
+
+ipNetToMediaIfIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..2147483647)
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The interface on which this entry's equivalence is
+            effective.  The interface identified by a particular value
+            of this index is the same interface as identified by the
+
+            same value of the IF-MIB's ifIndex.
+
+            This object predates the rule limiting index objects to a
+            max access value of 'not-accessible' and so continues to use
+            a value of 'read-create'."
+    ::= { ipNetToMediaEntry 1 }
+
+ipNetToMediaPhysAddress OBJECT-TYPE
+    SYNTAX     PhysAddress (SIZE(0..65535))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The media-dependent `physical' address.  This object should
+            return 0 when this entry is in the 'incomplete' state.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity should not save the
+            change to non-volatile storage.  Note: a stronger
+            requirement is not used because this object was previously
+            defined."
+    ::= { ipNetToMediaEntry 2 }
+
+ipNetToMediaNetAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The IpAddress corresponding to the media-dependent
+            `physical' address.
+
+            This object predates the rule limiting index objects to a
+            max access value of 'not-accessible' and so continues to use
+            a value of 'read-create'."
+    ::= { ipNetToMediaEntry 3 }
+
+ipNetToMediaType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other(1),        -- none of the following
+                invalid(2),      -- an invalidated mapping
+                dynamic(3),
+                static(4)
+            }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The type of mapping.
+
+            Setting this object to the value invalid(2) has the effect
+
+            of invalidating the corresponding entry in the
+            ipNetToMediaTable.  That is, it effectively dis-associates
+            the interface identified with said entry from the mapping
+            identified with said entry.  It is an implementation-
+            specific matter as to whether the agent removes an
+            invalidated entry from the table.  Accordingly, management
+            stations must be prepared to receive tabular information
+            from agents that corresponds to entries not currently in
+            use.  Proper interpretation of such entries requires
+            examination of the relevant ipNetToMediaType object.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity should not save the
+            change to non-volatile storage.  Note: a stronger
+            requirement is not used because this object was previously
+            defined."
+    ::= { ipNetToMediaEntry 4 }
+
+-- the deprecated ICMP group
+
+icmpInMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of ICMP messages which the entity received.
+            Note that this counter includes all those counted by
+            icmpInErrors.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsInMsgs."
+    ::= { icmp 1 }
+
+icmpInErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP messages which the entity received but
+            determined as having ICMP-specific errors (bad ICMP
+            checksums, bad length, etc.).
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsInErrors."
+    ::= { icmp 2 }
+
+icmpInDestUnreachs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Destination Unreachable messages
+            received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 3 }
+
+icmpInTimeExcds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Time Exceeded messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 4 }
+
+icmpInParmProbs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Parameter Problem messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 5 }
+
+icmpInSrcQuenchs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Source Quench messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 6 }
+
+icmpInRedirects OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Redirect messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 7 }
+
+icmpInEchos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo (request) messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 8 }
+
+icmpInEchoReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo Reply messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 9 }
+
+icmpInTimestamps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp (request) messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 10 }
+
+icmpInTimestampReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp Reply messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 11 }
+
+icmpInAddrMasks OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Request messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 12 }
+
+icmpInAddrMaskReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Reply messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 13 }
+
+icmpOutMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of ICMP messages which this entity
+            attempted to send.  Note that this counter includes all
+            those counted by icmpOutErrors.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsOutMsgs."
+    ::= { icmp 14 }
+
+icmpOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP messages which this entity did not send
+            due to problems discovered within ICMP, such as a lack of
+            buffers.  This value should not include errors discovered
+            outside the ICMP layer, such as the inability of IP to route
+            the resultant datagram.  In some implementations, there may
+            be no types of error which contribute to this counter's
+            value.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsOutErrors."
+    ::= { icmp 15 }
+
+icmpOutDestUnreachs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Destination Unreachable messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 16 }
+
+icmpOutTimeExcds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Time Exceeded messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 17 }
+
+icmpOutParmProbs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Parameter Problem messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 18 }
+
+icmpOutSrcQuenchs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Source Quench messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 19 }
+
+icmpOutRedirects OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Redirect messages sent.  For a host, this
+            object will always be zero, since hosts do not send
+            redirects.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 20 }
+
+icmpOutEchos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo (request) messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 21 }
+
+icmpOutEchoReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo Reply messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 22 }
+
+icmpOutTimestamps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp (request) messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 23 }
+
+icmpOutTimestampReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp Reply messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 24 }
+
+icmpOutAddrMasks OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Request messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 25 }
+
+icmpOutAddrMaskReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Reply messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 26 }
+
+-- deprecated conformance information
+-- deprecated compliance statements
+
+ipMIBCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for systems that implement only
+            IPv4.  For version-independence, this compliance statement
+            is deprecated in favor of ipMIBCompliance2."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ipGroup,
+                           icmpGroup }
+    ::= { ipMIBCompliances 1 }
+
+-- deprecated units of conformance
+
+ipGroup OBJECT-GROUP
+    OBJECTS   { ipForwarding,           ipDefaultTTL,
+                ipInReceives,           ipInHdrErrors,
+                ipInAddrErrors,         ipForwDatagrams,
+                ipInUnknownProtos,      ipInDiscards,
+                ipInDelivers,           ipOutRequests,
+                ipOutDiscards,          ipOutNoRoutes,
+                ipReasmTimeout,         ipReasmReqds,
+                ipReasmOKs,             ipReasmFails,
+                ipFragOKs,              ipFragFails,
+                ipFragCreates,          ipAdEntAddr,
+                ipAdEntIfIndex,         ipAdEntNetMask,
+                ipAdEntBcastAddr,       ipAdEntReasmMaxSize,
+                ipNetToMediaIfIndex,    ipNetToMediaPhysAddress,
+                ipNetToMediaNetAddress, ipNetToMediaType,
+                ipRoutingDiscards
+}
+    STATUS     deprecated
+    DESCRIPTION
+           "The ip group of objects providing for basic management of IP
+            entities, exclusive of the management of IP routes.
+
+            As part of the version independence, this group has been
+            deprecated.  "
+    ::= { ipMIBGroups 1 }
+
+icmpGroup OBJECT-GROUP
+    OBJECTS   { icmpInMsgs,          icmpInErrors,
+                icmpInDestUnreachs,  icmpInTimeExcds,
+                icmpInParmProbs,     icmpInSrcQuenchs,
+                icmpInRedirects,     icmpInEchos,
+                icmpInEchoReps,      icmpInTimestamps,
+                icmpInTimestampReps, icmpInAddrMasks,
+                icmpInAddrMaskReps,  icmpOutMsgs,
+                icmpOutErrors,       icmpOutDestUnreachs,
+                icmpOutTimeExcds,    icmpOutParmProbs,
+                icmpOutSrcQuenchs,   icmpOutRedirects,
+                icmpOutEchos,        icmpOutEchoReps,
+                icmpOutTimestamps,   icmpOutTimestampReps,
+                icmpOutAddrMasks,    icmpOutAddrMaskReps }
+    STATUS     deprecated
+    DESCRIPTION
+           "The icmp group of objects providing ICMP statistics.
+
+            As part of the version independence, this group has been
+            deprecated.  "
+    ::= { ipMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/IPATM-IPMC-MIB.mib b/snmp_builder/mibs/IPATM-IPMC-MIB.mib
new file mode 100644
index 0000000..8adb034
--- /dev/null
+++ b/snmp_builder/mibs/IPATM-IPMC-MIB.mib
@@ -0,0 +1,3244 @@
+IPATM-IPMC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    snmpModules, MODULE-IDENTITY, NOTIFICATION-TYPE, Counter32,
+        Integer32, Unsigned32, OBJECT-TYPE, IpAddress, mib-2
+        FROM SNMPv2-SMI
+    AtmAddr
+        FROM ATM-TC-MIB
+    TruthValue, RowStatus
+        FROM SNMPv2-TC
+    ipAdEntAddr
+        FROM RFC1213-MIB
+    InterfaceIndex
+        FROM IF-MIB;
+
+   marsMIB MODULE-IDENTITY
+       LAST-UPDATED "9809010000Z" -- 01 September 1998
+       ORGANIZATION "Internetworking Over NBMA (ion) Working Group"
+       CONTACT-INFO
+           "        Chris Chung (chihschung@aol.com)
+                    Independent Consultant
+
+            Editor: Maria Greene
+            Postal: Independent Contractor
+            E-mail: maria@xedia.com
+           "
+       DESCRIPTION
+           "This module defines a portion of the managed information
+            base (MIB) for managing classical IP multicast address
+            resolution server (MARS) and related entities as
+            described in the RFC2022.  This MIB is meant to be
+            used in conjunction with the ATM-MIB (RFC1695),
+            MIB-II (RFC1213), and optionally the IF-MIB (RFC1573).
+           "
+       REVISION     "9809010000Z" -- 01 September 1998
+       DESCRIPTION  "Published as RFC 2417. Changes/fixes:
+                     - reroot this MIB from snmpModules to mib-2
+                       to be consistent with location of other MIBs.
+                     - obsoletes RFC2366."
+       REVISION     "9804150145Z" -- 15 April 1998
+       DESCRIPTION  "Initial version, published as RFC 2366"
+       ::= { mib-2 57 }
+
+--***************************************************************
+
+--  IP ATM MARS Client Object Definitions
+--***************************************************************
+
+marsClientObjects  OBJECT IDENTIFIER ::= { marsMIB 1 }
+
+marsClientTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "The objects defined in this table are used for
+         the management of MARS clients, ATM attached
+         endpoints."
+    ::= { marsClientObjects 1 }
+
+marsClientEntry OBJECT-TYPE
+    SYNTAX  MarsClientEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry contains a MARS client and its associated
+         attributes.  An entry in the marsClientTable has
+         a corresponding entry in the ipAddrTable defined in
+         RFC1213. Association between the ipAddrTable and
+         the marsClientTable is made through the index,
+         ipAdEntAddr."
+    INDEX { ipAdEntAddr, marsClientIndex }
+    ::= { marsClientTable 1 }
+
+MarsClientEntry ::=
+    SEQUENCE {
+        marsClientIndex                    Integer32,
+        marsClientAddr                     AtmAddr,
+        marsClientDefaultMarsAddr          AtmAddr,
+        marsClientHsn                      Unsigned32,
+        marsClientRegistration             INTEGER,
+        marsClientCmi                      INTEGER,
+        marsClientDefaultMtu               INTEGER,
+        marsClientFailureTimer             INTEGER,
+        marsClientRetranDelayTimer         INTEGER,
+        marsClientRdmMulReqAddRetrTimer    INTEGER,
+        marsClientRdmVcRevalidateTimer     INTEGER,
+        marsClientJoinLeaveRetrInterval    INTEGER,
+        marsClientJoinLeaveRetrLimit       INTEGER,
+        marsClientRegWithMarsRdmTimer      INTEGER,
+        marsClientForceWaitTimer           INTEGER,
+        marsClientLmtToMissRedirMapTimer   INTEGER,
+        marsClientIdleTimer                INTEGER,
+        marsClientRowStatus                RowStatus
+    }
+
+marsClientIndex OBJECT-TYPE
+    SYNTAX  Integer32(1..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The auxiliary variable used to identify instances of
+         the columnar objects in the MARS MarsClientTable."
+    ::= { marsClientEntry 1 }
+
+marsClientAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+       MAX-ACCESS read-create
+       STATUS  current
+       DESCRIPTION
+           "The ATM address associated with the ATM Client."
+       ::= { marsClientEntry 2 }
+
+marsClientDefaultMarsAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+       MAX-ACCESS read-create
+       STATUS  current
+       DESCRIPTION
+           "The default MARS ATM address which is needed to
+            setup the initial signalling path between a MARS
+            client and its associated MARS."
+       ::= { marsClientEntry 3 }
+
+marsClientHsn OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS read-create
+       STATUS  current
+       DESCRIPTION
+           "The cluster membership own 32 bit Host Sequence
+            Number.  When a new cluster member starts up, it is
+            initialized to zero.  When the cluster member sends
+            the MARS_JOIN to register, the HSN will be correctly
+            set to the current cluster sequence number (CSN) when
+            the Client receives the copy of its MARS_JOIN from
+            the MARS.  It is is used to track the MARS sequence
+            number."
+       ::= { marsClientEntry 4 }
+
+marsClientRegistration OBJECT-TYPE
+    SYNTAX  INTEGER {
+          notRegistered (1),
+          registering (2),
+          registered (3),
+          reRegisteringFault (4),
+          reRegisteringRedirMap (5)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "An indication with regards to the registration
+         status of this client. The registration codes
+         of 'notRegistered (1)', 'registered (2)', and
+         registered (3) are self-explanatory. The
+         'reRegisteringFault (4)' indicates the client is
+         in the process of re-registering with a MARS due
+         to some fault conditions.  The 'reRegisteringRedMap
+         (5)' status code shows that client is re-registering
+         because it has received a MARS_REDIRECT_MAP message
+         and was told to register with a different MARS from
+         the current MARS."
+    ::= { marsClientEntry 5 }
+
+marsClientCmi OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "16 bit Cluster member identifier (CMI) assigned by the
+         MARS which uniquely identifies each endpoint attached
+         to the cluster.  The value becomes valid after the
+         'marsClientRegistration' is set to the value
+         of 'registered (1)'."
+    ::= { marsClientEntry 6 }
+
+marsClientDefaultMtu OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The default maximum transmission unit (MTU) used for
+         this cluster.  Note that the actual size used for a
+         VC between two members of the cluster may be negotiated
+         during connection setup and may be different than this
+         value.  Default value = 9180 bytes."
+    DEFVAL { 9180 }
+    ::= { marsClientEntry 7 }
+
+marsClientFailureTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "A timer used to flag the failure of last MARS_MULTI
+         to arrive.  Default value = 10 seconds (recommended)."
+    DEFVAL { 10 }
+    ::= { marsClientEntry 8 }
+
+marsClientRetranDelayTimer OBJECT-TYPE
+    SYNTAX  INTEGER (5..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The delay timer for sending out new MARS_REQUEST
+         for the group after the client learned that there
+         is no other group in the cluster.  The timer must
+         be set between 5 and 10 seconds inclusive."
+    ::= { marsClientEntry 9 }
+
+marsClientRdmMulReqAddRetrTimer OBJECT-TYPE
+    SYNTAX  INTEGER (5..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The initial random L_MULTI_RQ/ADD retransmit timer
+         which can be set between 5 and 10 seconds inclusive."
+    ::= { marsClientEntry 10 }
+
+marsClientRdmVcRevalidateTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The random time to set VC_revalidate flag.  The
+         timer value ranges between 1 and 10 seconds
+         inclusive."
+    ::= { marsClientEntry 11 }
+
+marsClientJoinLeaveRetrInterval OBJECT-TYPE
+    SYNTAX  INTEGER(5..2147483647)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "MARS_JOIN/LEAVE retransmit interval. The minimum
+         and recommended values are 5 and 10 seconds,
+         respectively."
+    DEFVAL { 10 }
+    ::= { marsClientEntry 12 }
+
+marsClientJoinLeaveRetrLimit OBJECT-TYPE
+    SYNTAX  INTEGER (0..5)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "MARS_JOIN/LEAVE retransmit limit. The maximum
+         value is 5."
+    ::= { marsClientEntry 13 }
+
+marsClientRegWithMarsRdmTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Random time to register with MARS."
+    ::= { marsClientEntry 14 }
+
+marsClientForceWaitTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Force wait if MARS re-registration is looping.
+         The minimum value is 1 minute."
+    ::= { marsClientEntry 15 }
+
+marsClientLmtToMissRedirMapTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..4)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Timer limit for client to miss MARS_REDIRECT_MAPS."
+    ::= { marsClientEntry 16 }
+
+marsClientIdleTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The configurable inactivity timer associated with a
+         client. When a VC is created at this client, it gets
+         the idle timer value from this configurable timer.
+         The minimum suggested value is 1 minute and the
+         recommended default value is 20 minutes."
+    DEFVAL { 20 }
+    ::= { marsClientEntry 17 }
+
+marsClientRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         A row cannot be made 'active' until instances of
+         all corresponding columns in the row of this table
+         are appropriately configured and until the agent
+         has also created a corresponding row in the
+         marsClientStatTable.
+
+         When this object has a value of 'active', the
+         following columnar objects can not be modified:
+
+           marsClientDefaultMarsAddr,
+           marsClientHsn,
+           marsClientRegstration,
+           marsClientCmi,
+           marsClientDefaultMtu
+
+         while other objects in this conceptual row can be
+         modified irrespective of the value of this object.
+
+         Deletion of this row is allowed regardless of
+         whether or not a row in any associated tables
+         (i.e., marsClientVcTable) still exists or is in
+         use. Once this row is deleted, it is recommended
+         that the agent or the SNMP management station
+         (if possible) through the set command deletes
+         any stale rows that are associated with this
+         row."
+    ::= { marsClientEntry 18 }
+
+--****************************************************************
+
+-- IP ATM MARS Client Multicast Group Address Object Definitions
+--****************************************************************
+
+marsClientMcGrpTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsClientMcGrpEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains a list of IP multicast group address
+         blocks associated with a MARS client.  Entries in this
+         table are used by the client that needs to receive or
+         transmit packets from/to the specified range of
+         multicast addresses.
+         Each row can be created or deleted via configuration."
+    ::= {  marsClientObjects 2 }
+
+marsClientMcGrpEntry OBJECT-TYPE
+    SYNTAX  MarsClientMcGrpEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry represents a consecutive block of multicast
+         group addresses."
+    INDEX { ipAdEntAddr,
+            marsClientIndex,
+            marsClientMcMinGrpAddr,
+            marsClientMcMaxGrpAddr }
+    ::= { marsClientMcGrpTable 1 }
+
+MarsClientMcGrpEntry ::=
+    SEQUENCE {
+        marsClientMcMinGrpAddr           IpAddress,
+        marsClientMcMaxGrpAddr           IpAddress,
+        marsClientMcGrpRowStatus         RowStatus
+    }
+
+marsClientMcMinGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Minimum multicast group address - the min and max
+         multicast forms multi-group block.  If the MinGrpAddr
+         and MaxGrpAddr are the same, it indicates that this
+         block contains a single group address."
+    ::= { marsClientMcGrpEntry 1 }
+
+marsClientMcMaxGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Maximum multicast group address - the min and max
+         multicast forms a multi-group block.  If the MinGrpAddr
+         and MaxGrpAddr are the same, it indicates that this
+         block contains a single group address."
+    ::= { marsClientMcGrpEntry 2 }
+
+marsClientMcGrpRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create or delete a row in this
+         table.
+
+         Since other objects in this row are not-accessible
+         'index-objects', the value of this object has no
+         effect on whether those objects in this conceptual
+         row can be modified."
+    ::= { marsClientMcGrpEntry 3 }
+
+--****************************************************************
+-- IP ATM MARS Client Backup MARS Object Definitions
+--****************************************************************
+
+marsClientBackupMarsTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsClientBackupMarsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains a list of backup MARS addresses that
+         a client can connect to in case of failure for connecting
+         to the primary server. The list of addresses is in
+         descending order of preference. It should be noted that
+         the backup list provided by the MARS to the client via
+         the MARS_REDIRECT_MAP message has a higher preference than
+         addresses that are manually configured into the client.
+         When such a list is received from the MARS, this information
+         should be inserted at the top of the list.
+         Each row can be created or deleted via configuration."
+    ::= {  marsClientObjects 3 }
+
+marsClientBackupMarsEntry OBJECT-TYPE
+    SYNTAX  MarsClientBackupMarsEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry represents an ATM address of a backup MARS."
+    INDEX { ipAdEntAddr,
+            marsClientIndex,
+            marsClientBackupMarsPriority,
+            marsClientBackupMarsAddr }
+    ::= { marsClientBackupMarsTable 1 }
+
+MarsClientBackupMarsEntry ::=
+    SEQUENCE {
+        marsClientBackupMarsPriority     Unsigned32,
+        marsClientBackupMarsAddr         AtmAddr,
+        marsClientBackupMarsRowStatus    RowStatus
+    }
+
+marsClientBackupMarsPriority OBJECT-TYPE
+    SYNTAX  Unsigned32(0..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The priority associated with a backup MARS. A lower
+         priority value inidcates a higher preference."
+    ::= { marsClientBackupMarsEntry 1 }
+
+marsClientBackupMarsAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The ATM address associated with a backup MARS."
+    ::= { marsClientBackupMarsEntry 2 }
+
+marsClientBackupMarsRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create or delete a row in this
+         table.
+
+         Since other objects in this row are not-accessible
+         'index-objects', the value of this object has no effect
+         on whether those objects in this conceptual row can be
+         modified."
+    ::= { marsClientBackupMarsEntry 3 }
+
+--***************************************************************
+
+--  IP ATM MARS Client VC Object Definition Table
+--***************************************************************
+
+marsClientVcTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsClientVcEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains information about open virtual
+         circuits (VCs) that a client has.  For point to point
+         circuit, each entry represents a single VC connection
+         between this client ATM address to another party ATM
+         address.  In the case of point to multipoint connection
+         where a single source address is associated with
+         multiple destinations, several entries are used to
+         represent the relationship.  An example of point to
+         multi-point VC represented in a table is shown below.
+
+                Client    VPI/VCI    Grp Addr1/Addr2    Part Addr
+                  1         0,1          g1,g2             p1
+                  1         0,1          g1,g2             p2
+                  1         0,1          g1,g2             p3
+
+         Note:  This table assumes the IP multicast address
+                groups (min, max) defined in each entry are
+                always consecutive.  In the case of that a
+                client receives a JOIN/LEAVE with
+                mars$flag.punched set, each pair of the IP
+                groups will first be broken into several
+                pairs of consecutive IP groups before each
+                entry row corresponding to a pair of IP group
+                is created."
+    ::= { marsClientObjects 4 }
+
+marsClientVcEntry OBJECT-TYPE
+    SYNTAX  MarsClientVcEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The objects contained in the entry are VC related
+         attributes such as VC signalling type, control VC
+         type, idle timer, negotiated MTU size, etc."
+    INDEX { ipAdEntAddr,
+            marsClientIndex,
+            marsClientVcVpi,
+            marsClientVcVci,
+            marsClientVcMinGrpAddr,
+            marsClientVcMaxGrpAddr,
+            marsClientVcPartyAddr }
+    ::= { marsClientVcTable 1 }
+
+MarsClientVcEntry ::=
+    SEQUENCE {
+        marsClientVcVpi            INTEGER,
+        marsClientVcVci            INTEGER,
+        marsClientVcMinGrpAddr     IpAddress,
+        marsClientVcMaxGrpAddr     IpAddress,
+        marsClientVcPartyAddr      AtmAddr,
+        marsClientVcPartyAddrType  INTEGER,
+        marsClientVcType           INTEGER,
+        marsClientVcCtrlType       INTEGER,
+        marsClientVcIdleTimer      INTEGER,
+        marsClientVcRevalidate     TruthValue,
+        marsClientVcEncapsType     INTEGER,
+        marsClientVcNegotiatedMtu  INTEGER,
+        marsClientVcRowStatus      RowStatus
+    }
+
+marsClientVcVpi OBJECT-TYPE
+    SYNTAX  INTEGER (0..4095)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The value of virtual path identifier (VPI). Since
+         a VPI can be numbered 0, this sub-index can take
+         a value of 0."
+    ::= { marsClientVcEntry 1 }
+
+marsClientVcVci OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The value of virtual circuit identifier (VCI). Since
+         a VCI can be numbered 0, this sub-index can take
+         a value of 0."
+    ::= { marsClientVcEntry 2 }
+
+marsClientVcMinGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Minimum IP multicast group address - the min and
+         max multicast forms a multi-group consecutive
+         block which is associated with a table entry.
+
+         if the MinGrpAddr and MaxGrpAddr are the same, it
+         indicates that the size of multi-group block is 1,
+         a single IP group."
+    ::= { marsClientVcEntry 3 }
+
+marsClientVcMaxGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Maximum IP multicast group address - the min and
+         max multicast forms a multi-group consecutive
+         block which is associated with a table entry.
+         if the MinGrpAddr and MaxGrpAddr are the same, it
+         indicates that the size of multi-group block is 1,
+         a single IP group."
+    ::= { marsClientVcEntry 4 }
+
+marsClientVcPartyAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An ATM party address in which this VC is linked.
+         The party type is identified by the
+         marsClientVcPartyAddrType."
+    ::= { marsClientVcEntry 5 }
+
+marsClientVcPartyAddrType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          called (1),
+          calling (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The party type is associated with the party address.
+         The 'called (1)' indicates that the party address is
+         a destination address which implies that VC is
+         originated from this client.  The 'calling (2)'
+         indicates the VC was initiated externally to this
+         client. In this case, the party address is the
+         source address."
+    ::= { marsClientVcEntry 6 }
+
+marsClientVcType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          pvc (1),
+          svc (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Circuit Connection type: permanent virtual circuit or
+         switched virtual circuit."
+    ::= { marsClientVcEntry 7 }
+
+marsClientVcCtrlType OBJECT-TYPE
+    SYNTAX  INTEGER {
+           pointToPointVC (1),
+           clusterControlVC (2),
+           pointToMultiPointVC (3)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Control VC type used to specify a particular connection.
+           pointToPointVC (1):
+             used by the ATM Clients for the registration and
+             queries.  This VC or the initial signalling path
+             is set up from the source Client to a MARS. It is
+             bi-directional.
+           clusterControlVC (2):
+             used by a MARS to issue asynchronous updates to an
+             ATM Client.  This VC is established from the MARS
+             to the ATM Client.
+           pointToMultiPointVC (3):
+             used by the client to transfer multicast data
+             packets from layer 3.  This VC is established
+             from the source ATM Client to a destination ATM
+             endpoint which can be a multicast group member
+             or an MCS.  The destination endpoint was obtained
+             from the MARS."
+    ::= { marsClientVcEntry 8 }
+
+marsClientVcIdleTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The idle timer associated with this VC.  The minimum
+         suggested value is 1 minute and the recommended
+         default value is 20 minutes."
+    DEFVAL { 20 }
+    ::= { marsClientVcEntry 9 }
+
+marsClientVcRevalidate OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "A flag associated with an open and active multipoint
+         VC.  It is checked every time a packet is queued for
+         transmission on that VC. The object has the value of
+         true (1) if revalidate is required and the value
+         false (2) otherwise."
+    ::= { marsClientVcEntry 10 }
+
+ marsClientVcEncapsType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          other (1),
+          llcSnap (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The encapsulation type used when communicating over
+         this VC."
+    ::= { marsClientVcEntry 11 }
+
+marsClientVcNegotiatedMtu OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The negotiated MTU when communicating over this VC."
+    ::= { marsClientVcEntry 12 }
+
+marsClientVcRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         A row cannot be made 'active' until instances of
+         all corresponding columns in the row of this table
+         are appropriately configured.
+
+         While objects: marsClientVcIdleTimer and
+
+         marsClientVcRevalidate in this conceptual
+         row can be modified irrespective of the value
+         of this object, all other objects in the row can
+         not be modified when this object has a value
+         of 'active'.
+
+         It is possible for an SNMP management station
+         to set the row to 'notInService' and modify
+         the entry and then set it back to 'active'
+
+         with the following exception. That is, rows
+         for which the corresponding instance of
+         marsClientVcType has a value of 'svc' can not
+         be modified or deleted."
+    ::= { marsClientVcEntry 13 }
+
+--***************************************************************
+--  IP ATM MARS Client Statistic Object Definition Table
+--***************************************************************
+
+marsClientStatTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsClientStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "The table contains statistics collected at MARS
+         clients."
+    ::= { marsClientObjects 5 }
+
+marsClientStatEntry OBJECT-TYPE
+    SYNTAX  MarsClientStatEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry contains statistics collected at one MARS
+         client."
+    INDEX { ipAdEntAddr, marsClientIndex }
+    ::= { marsClientStatTable 1 }
+
+MarsClientStatEntry ::=
+    SEQUENCE {
+        marsClientStatTxReqMsgs        Counter32,
+        marsClientStatTxJoinMsgs       Counter32,
+        marsClientStatTxLeaveMsgs      Counter32,
+        marsClientStatTxGrpLstReqMsgs  Counter32,
+        marsClientStatRxJoinMsgs       Counter32,
+        marsClientStatRxLeaveMsgs      Counter32,
+        marsClientStatRxMultiMsgs      Counter32,
+        marsClientStatRxNakMsgs        Counter32,
+        marsClientStatRxMigrateMsgs    Counter32,
+        marsClientStatRxGrpLstRplyMsgs Counter32,
+        marsClientStatFailMultiMsgs    Counter32
+    }
+
+marsClientStatTxReqMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_REQUEST messages transmitted
+         from a client."
+    ::= { marsClientStatEntry 1 }
+
+marsClientStatTxJoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_JOIN messages transmitted from
+         a client."
+    ::= { marsClientStatEntry 2 }
+
+marsClientStatTxLeaveMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_LEAVE messages transmitted from
+         a client."
+    ::= { marsClientStatEntry 3 }
+
+marsClientStatTxGrpLstReqMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_GROUPLIST_REQUEST messages
+         transmitted from a client."
+    ::= { marsClientStatEntry 4 }
+
+marsClientStatRxJoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_JOIN messages received by
+
+         a client."
+    ::= { marsClientStatEntry 5 }
+
+marsClientStatRxLeaveMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_LEAVE messages received by
+         a client."
+    ::= { marsClientStatEntry 6 }
+
+marsClientStatRxMultiMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MULTI messages received by
+         a client."
+    ::= { marsClientStatEntry 7 }
+
+marsClientStatRxNakMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_NAK messages received by
+         a client."
+    ::= { marsClientStatEntry 8 }
+
+marsClientStatRxMigrateMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MIGRATE messages received by
+         a client."
+    ::= { marsClientStatEntry 9 }
+
+    marsClientStatRxGrpLstRplyMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_GROUPLIST_REPLY messages
+         received by a client."
+    ::= { marsClientStatEntry 10 }
+
+marsClientStatFailMultiMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of timeouts occurred indicating
+         failure of the last MARS_MULTI to arrive."
+    ::= { marsClientStatEntry 11 }
+
+--***************************************************************
+--  IP ATM MARS Object Definitions
+--***************************************************************
+
+marsObjects    OBJECT IDENTIFIER ::= { marsMIB 2 }
+
+marsTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "The objects defined in this table are used for the
+         management of MARS servers."
+    ::= {  marsObjects 1 }
+
+marsEntry OBJECT-TYPE
+    SYNTAX  MarsEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry contains a MARS and its associated
+         attributes."
+    INDEX { marsIndex, marsIfIndex }
+    ::= { marsTable 1 }
+
+MarsEntry ::=
+    SEQUENCE {
+        marsIndex              Integer32,
+        marsIfIndex            InterfaceIndex,
+        marsAddr               AtmAddr,
+        marsLocal              TruthValue,
+        marsServStatus         INTEGER,
+        marsServType           INTEGER,
+        marsServPriority       Unsigned32,
+        marsRedirMapMsgTimer   INTEGER,
+        marsCsn                Unsigned32,
+        marsSsn                Unsigned32,
+        marsRowStatus          RowStatus
+    }
+
+marsIndex OBJECT-TYPE
+    SYNTAX  Integer32(1..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The auxiliary variable used to identify instances of
+         the columnar objects in the MARS table."
+    ::= { marsEntry 1 }
+
+marsIfIndex OBJECT-TYPE
+    SYNTAX  InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The ifIndex of the interface that the MARS is
+         associated with."
+    ::= { marsEntry 2 }
+
+marsAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The ATM address associated with the MARS."
+    ::= { marsEntry 3 }
+
+marsLocal OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "A flag associated with a MARS entry.  The object has
+         the value of true (1) if the MARS whose interface
+         is local to the machine that implements this MIB;
+         otherwise the object has the value of false (2)."
+    ::= { marsEntry 4 }
+
+marsServStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+          active (1),
+          inactive (2),
+          faulted (3)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The current status of MARS."
+    ::= { marsEntry 5 }
+
+marsServType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          primary (1),
+          backup (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Types of MARS servers: primary or backup."
+    ::= { marsEntry 6 }
+
+marsServPriority OBJECT-TYPE
+    SYNTAX  Unsigned32(0..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Priority associated with a backup MARS server.
+         A backup MARS server with lower priority value
+         indicates a higher preference than other backup
+         MARS servers to be used as the MARS server when
+         the primary server fails."
+    ::= { marsEntry 7 }
+
+marsRedirMapMsgTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Periodic interval on which a multi-part
+         MARS_REDIRECT_MAP is sent from this MARS."
+       DEFVAL { 1 }
+    ::= { marsEntry 8 }
+
+marsCsn OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Current cluster sequence number (CSN) which is global
+         within the context of a given protocol.  The CSN is
+         incremented by the MARS on every transmission of a
+         message on ClusterControlVC.  A cluster member uses
+         the CSN to track the message loss on ClusterControlVC
+         or to monitor a membership change."
+    ::= { marsEntry 9 }
+
+marsSsn OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Current server sequence number (SSN) which is global
+         within the context of a given protocol.  The SSN is
+         incremented by the MARS on every transmission of a
+         message on ServerControlVC.  A MCS uses the SSN to
+         track the message loss on ServerControlVC or to
+         monitor a membership change."
+    ::= { marsEntry 10 }
+
+marsRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         A row cannot be made 'active' until instances of
+         all corresponding columns in the row of this table
+         are appropriately configured and until the agent
+         has also created a corresponding row in the
+         marsStatTable.
+
+         When this object has a value of 'active', the
+         following columnar objects can not be modified:
+
+           marsAddr,
+           marsAddrLocal,
+           marsServStatus,
+           marsServType,
+           marsCsn,
+           marsSsn
+
+         while other objects in this conceptual row can be
+         modified irrespective of the value of this object.
+
+         Deletion of this row is allowed regardless of
+         whether or not a row in any associated tables
+         (i.e., marsVcTable) still exists or is in use.
+         Once this row is deleted, it is recommended that
+         the agent or the SNMP management station (if
+         possible) through the set command deletes any
+         stale rows that are associated with this row."
+    ::= { marsEntry 11 }
+
+--****************************************************************
+-- IP ATM MARS Multicast Group Address Object Definitions
+--****************************************************************
+
+marsMcGrpTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsMcGrpEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains a list of IP multicast address
+         blocks associated with a MARS.  Entries in this table
+         are used by the MARS host map table and the server map
+         table.  They should be created prior to being referenced
+         as indices by those tables.
+         Each row can be created or deleted via configuration."
+    ::= { marsObjects 2 }
+
+marsMcGrpEntry OBJECT-TYPE
+    SYNTAX  MarsMcGrpEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry represents a consecutive block of multicast
+         group addresses."
+    INDEX { marsIndex,
+            marsIfIndex,
+            marsMcMinGrpAddr,
+            marsMcMaxGrpAddr }
+    ::= { marsMcGrpTable 1 }
+
+MarsMcGrpEntry ::=
+    SEQUENCE {
+        marsMcMinGrpAddr           IpAddress,
+        marsMcMaxGrpAddr           IpAddress,
+        marsMcGrpAddrUsage         INTEGER,
+        marsMcGrpRxLayer3GrpSets   Counter32,
+        marsMcGrpRxLayer3GrpResets Counter32,
+        marsMcGrpRowStatus         RowStatus
+    }
+
+marsMcMinGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Minimum multicast group address - the min and max
+         multicast forms multi-group block.  If the MinGrpAddr
+         and MaxGrpAddr are the same, it indicates that this
+
+         block contains a single group address."
+    ::= { marsMcGrpEntry 1 }
+
+marsMcMaxGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Maximum multicast group address - the min and max
+         multicast forms a multi-group block.  If The
+         MinGrpAddr and MaxGrpAddr are the same, it indicates
+         that this block contains a single group address."
+    ::= { marsMcGrpEntry 2 }
+
+marsMcGrpAddrUsage OBJECT-TYPE
+    SYNTAX  INTEGER {
+          hostMap (1),
+          serverMap (2),
+          hostServerMap (3)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Usage of the multicast address block.  The hostMap (1)
+         indicates that the address block is only used in the
+         MARS host map table. The serverMap (2) indicates
+         that the address block is only used in the MARS
+         server map table.  The hostServerMap (3) indicates
+         that the address block is used in both the host map
+         and the server map tables."
+    ::= { marsMcGrpEntry 3 }
+
+marsMcGrpRxLayer3GrpSets OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Number of MARS_JOIN messages received with
+         mars$flags.layer3grp flag set."
+    ::= { marsMcGrpEntry 4 }
+
+marsMcGrpRxLayer3GrpResets OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Number of MARS_JOIN messages received with
+         mars$flags.layer3grp flag reset."
+    ::= { marsMcGrpEntry 5 }
+
+marsMcGrpRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         The value of this object has no effect on whether
+         other objects in this conceptual row can be modified."
+    ::= { marsMcGrpEntry 6 }
+
+--***************************************************************
+--  IP ATM MARS Host Map Object Definitions
+--***************************************************************
+
+marsHostMapTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsHostMapEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table caches mappings between IP multicast
+         address to a list of ATM addresses that are
+         configured or dynamically learned from the MARS.
+         This address resolution is used for the host map.
+         It supports the mapping of a block of multicast
+         group addresses to a cluster member address.  In
+         the case where a group block is associated with
+         multiple cluster members, several entries are
+         used to representing the relationship."
+    ::= { marsObjects 3 }
+
+marsHostMapEntry OBJECT-TYPE
+    SYNTAX  MarsHostMapEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry row contains attributes associated with
+         the mapping between a multicast group block and an
+         ATM address."
+    INDEX { marsIndex,
+            marsIfIndex,
+            marsMcMinGrpAddr,
+            marsMcMaxGrpAddr,
+            marsHostMapAtmAddr }
+    ::= { marsHostMapTable 1 }
+
+MarsHostMapEntry ::=
+    SEQUENCE {
+        marsHostMapAtmAddr     AtmAddr,
+        marsHostMapRowType     INTEGER,
+        marsHostMapRowStatus   RowStatus
+    }
+
+marsHostMapAtmAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The mapped cluster member ATM address."
+    ::= { marsHostMapEntry 1 }
+
+marsHostMapRowType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          static (1),
+          dynamic (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Method in which this entry row is created. The
+         static (1) indicates that this row is created
+         through configuration.  The dynamic (2) indicates
+         that the row is created as the result of group
+         address updates received at this MARS."
+    ::= { marsHostMapEntry 2 }
+
+marsHostMapRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         This object must not be set to 'active' until
+         instances of all corresponding columns in the
+         row of this table are appropriately configured.
+
+         It is possible for an SNMP management station
+         to set the row to 'notInService' and modify
+         the entry and then set it back to 'active'
+         with the following exception. That is, rows
+         for which the corresponding instance of
+         marsHostMapRowType has a value of 'dynamic'
+
+         can not be modified or deleted."
+    ::= { marsHostMapEntry 3 }
+
+--***************************************************************
+--  IP ATM MARS Server Map Object Definitions
+--***************************************************************
+
+marsServerMapTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsServerMapEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table caches mappings between IP multicast
+         address to a list of MCS ATM addresses that are
+         configured or dynamically learned from the MARS.
+         This address resolution is used for the server map.
+         It supports the mapping of a block of multicast
+         group addresses to a MCS address.  In the case
+         where a group block is associated with multiple
+         MCSs, several entries are used to representing the
+         relationship."
+    ::= { marsObjects 4 }
+
+marsServerMapEntry OBJECT-TYPE
+    SYNTAX  MarsServerMapEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry row contains attributes associated with
+         the mapping between a multicast group block and an
+         MCS address."
+    INDEX { marsIndex,
+            marsIfIndex,
+            marsMcMinGrpAddr,
+            marsMcMaxGrpAddr,
+            marsServerMapAtmAddr }
+    ::= { marsServerMapTable 1 }
+
+MarsServerMapEntry ::=
+    SEQUENCE {
+        marsServerMapAtmAddr   AtmAddr,
+        marsServerMapRowType   INTEGER,
+        marsServerMapRowStatus RowStatus
+    }
+
+marsServerMapAtmAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The mapped MCS ATM address."
+    ::= { marsServerMapEntry 1 }
+
+marsServerMapRowType OBJECT-TYPE
+    SYNTAX  INTEGER {
+            static (1),
+            dynamic (2)
+          }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Method in which this entry row is created. The
+         'static (1)' indicates that this row is created
+         through configuration.  The 'dynamic (2)' indicates
+         that the row is created as the result of group
+         address updates received at this MARS."
+    ::= { marsServerMapEntry 2 }
+
+marsServerMapRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         This object must not be set to 'active' until
+         instances of all corresponding columns in the
+         row of this table are appropriately configured.
+
+         It is possible for an SNMP management station
+         to set the row to 'notInService' and modify
+         the entry and then set it back to 'active'
+         with the following exception. That is, rows
+         for which the corresponding instance of
+         marsServerMapRowType has a value of 'dynamic'
+         can not be modified or deleted."
+    ::= { marsServerMapEntry 3 }
+
+--***************************************************************
+--  IP ATM MARS VC Object Definition Table
+--***************************************************************
+
+marsVcTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsVcEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains information about open virtual circuits
+         (VCs) that a MARS has.  For point to point circuit, each
+         entry represents a single VC connection between this MARS
+         ATM address to another party's ATM address.  In the case of
+         point to multipoint connection where a ControlVc is attached
+         with multiple leaf nodes, several entries are used  to
+         represent the relationship.  An example of point to
+         multi-point VC represented in a table is shown below.
+
+              MARS     VPI/VCI    MARS Addr     Party Addr
+                1         0,1         m1            p1
+                1         0,1         m1            p2
+                1         0,1         m1            p3"
+    ::= { marsObjects 5 }
+
+marsVcEntry OBJECT-TYPE
+    SYNTAX  MarsVcEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The objects contained in the entry are VC related attributes
+         such as VC signalling type, control VC type, idle timer,
+         negotiated MTU size, etc."
+    INDEX { marsIndex,
+            marsIfIndex,
+            marsVcVpi,
+            marsVcVci,
+            marsVcPartyAddr }
+    ::= { marsVcTable 1 }
+
+MarsVcEntry ::=
+    SEQUENCE {
+        marsVcVpi              INTEGER,
+        marsVcVci              INTEGER,
+        marsVcPartyAddr        AtmAddr,
+        marsVcPartyAddrType    INTEGER,
+        marsVcType             INTEGER,
+        marsVcCtrlType         INTEGER,
+        marsVcIdleTimer        INTEGER,
+        marsVcCmi              INTEGER,
+        marsVcEncapsType       INTEGER,
+        marsVcNegotiatedMtu    INTEGER,
+        marsVcRowStatus        RowStatus
+      }
+
+marsVcVpi OBJECT-TYPE
+    SYNTAX  INTEGER (0..4095)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The value of virtual path identifier (VPI). Since
+         a VPI can be numbered 0, this sub-index can take
+         a value of 0."
+    ::= { marsVcEntry 1 }
+
+marsVcVci OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+         "The value of virtual circuit identifier (VCI).
+          Since a VCI can be numbered 0, this sub-index
+          can take a value of 0."
+    ::= { marsVcEntry 2 }
+
+marsVcPartyAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An ATM party address in which this VC is linked. The
+         party type is identified by the marsVcPartyAddrType."
+    ::= { marsVcEntry 5 }
+
+marsVcPartyAddrType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          called (1),
+          calling (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The party type is associated with the party address.  The
+         'called (1)' indicates that the party address is a
+         destination address which implies that VC is originated
+         from this MARS. The 'calling (2)' indicates the VC was
+         initiated externally to this MARS.  The party address is
+         the source address."
+    ::= { marsVcEntry 6 }
+
+marsVcType OBJECT-TYPE
+    SYNTAX  INTEGER {
+             pvc (1),
+             svc (2)
+
+           }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Circuit Connection type: permanent virtual circuit or
+         switched virtual circuit."
+    ::= { marsVcEntry 7 }
+
+marsVcCtrlType OBJECT-TYPE
+    SYNTAX  INTEGER {
+           pointToPointVC (1),
+           clusterControlVC (2),
+           serverControlVC (3)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Control VC type used to specify a particular connection.
+           pointToPointVC (1):
+             used by the ATM endpoints (clients) or the MCS for
+             registration and queries.  This VC is set up from
+             a MARS client and MCS to this MARS.  It is a
+             bi-directional VC.
+           clusterControlVC (2):
+             used by MARS to issue asynchronous updates to ATM
+             an ATM client.  This VC is established from the
+             MARs to the ATM client.
+           serverControlVC (3):
+             used by MARS to issue asynchronous update to ATM
+             multicast servers.  This type of VC exists when at
+             least a MCS is being used."
+    ::= { marsVcEntry 8 }
+
+marsVcIdleTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The idle timer associated with this VC.  The minimum
+         suggested value is 1 minute and the recommended default
+         value is 20 minutes."
+    DEFVAL { 20 }
+    ::= { marsVcEntry 9 }
+
+marsVcCmi OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Cluster member identifier (CMI) which uniquely identifies
+         each endpoint attached to the cluster.  This variable
+         applies to each 'leaf node' of an outgoing control VC."
+    ::= { marsVcEntry 10 }
+
+marsVcEncapsType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          other (1),
+          llcSnap (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The encapsulation type used when communicating over
+         this VC."
+    ::= { marsVcEntry 11 }
+
+marsVcNegotiatedMtu OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The negotiated MTU when communicating over this VC."
+    ::= { marsVcEntry 12 }
+
+marsVcRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         A row cannot be made 'active' until instances of
+         all corresponding columns in the row of this table
+         are appropriately configured.
+
+         While the marsVcIdleTimer in this conceptual
+         row can be modified irrespective of the value
+         of this object, all other objects in the row can
+         not be modified when this object has a value
+         of 'active'.
+
+         It is possible for an SNMP management station
+         to set the row to 'notInService' and modify
+         the entry and then set it back to 'active'
+
+         with the following exception. That is, rows
+         for which the corresponding instance of
+         marsVcType has a value of 'svc' can not be
+         modified or deleted."
+    ::= { marsVcEntry 13 }
+
+--***************************************************************
+--  IP ATM MARS Registered Cluster Member List Table
+--***************************************************************
+
+marsRegClientTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsRegClientEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains ATM identities of all the currently
+         registered cluster members at a MARS.  Each entry represents
+         one set of ATM identities associated with one cluster member
+         or the MARS client."
+    ::= { marsObjects 6 }
+
+marsRegClientEntry OBJECT-TYPE
+    SYNTAX  MarsRegClientEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry row contains attributes associated with one
+         register cluster member."
+    INDEX { marsIndex,
+            marsIfIndex,
+            marsRegClientCmi}
+    ::= { marsRegClientTable 1 }
+
+MarsRegClientEntry ::=
+    SEQUENCE {
+        marsRegClientCmi       INTEGER,
+        marsRegClientAtmAddr   AtmAddr
+    }
+
+marsRegClientCmi OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This cluster member identifier is used as an auxiliary index
+         for the entry in this table."
+    ::= { marsRegClientEntry 1 }
+
+marsRegClientAtmAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "The registered client's ATM address."
+    ::= { marsRegClientEntry 2 }
+
+--***************************************************************
+--  IP ATM MARS Registered Server Member List Table
+--***************************************************************
+
+marsRegMcsTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsRegMcsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains ATM identities of all the currently
+         registered MCSs at a MARS. Each entry represents one set
+         of ATM identities associated with one MCS."
+    ::= { marsObjects 7 }
+
+marsRegMcsEntry OBJECT-TYPE
+    SYNTAX  MarsRegMcsEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry row contains attributes associated with one
+         registered MCS."
+    INDEX { marsIndex,
+            marsIfIndex,
+            marsRegMcsAtmAddr
+          }
+    ::= { marsRegMcsTable 1 }
+
+MarsRegMcsEntry ::=
+    SEQUENCE {
+        marsRegMcsAtmAddr  AtmAddr
+    }
+
+marsRegMcsAtmAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "The registered MCS's ATM address."
+    ::= { marsRegMcsEntry 1 }
+
+--***************************************************************
+--  IP ATM MARS Statistics Object Definition Table
+--***************************************************************
+
+marsStatTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsStatEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The table contains statistics collected at MARS."
+    ::= {  marsObjects 8 }
+
+marsStatEntry OBJECT-TYPE
+    SYNTAX  MarsStatEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry contains statistics collected at one MARS."
+    INDEX { marsIndex, marsIfIndex }
+    ::= { marsStatTable 1 }
+
+MarsStatEntry ::=
+    SEQUENCE {
+        marsStatTxMultiMsgs        Counter32,
+        marsStatTxGrpLstRplyMsgs   Counter32,
+        marsStatTxRedirectMapMsgs  Counter32,
+        marsStatTxMigrateMsgs      Counter32,
+        marsStatTxNakMsgs          Counter32,
+        marsStatTxJoinMsgs         Counter32,
+        marsStatTxLeaveMsgs        Counter32,
+        marsStatTxSjoinMsgs        Counter32,
+        marsStatTxSleaveMsgs       Counter32,
+        marsStatTxMservMsgs        Counter32,
+        marsStatTxUnservMsgs       Counter32,
+        marsStatRxReqMsgs          Counter32,
+        marsStatRxGrpLstReqMsgs    Counter32,
+        marsStatRxJoinMsgs         Counter32,
+        marsStatRxLeaveMsgs        Counter32,
+        marsStatRxMservMsgs        Counter32,
+        marsStatRxUnservMsgs       Counter32,
+        marsStatRxBlkJoinMsgs      Counter32,
+        marsStatRegMemGroups       Counter32,
+        marsStatRegMcsGroups       Counter32
+    }
+
+marsStatTxMultiMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MULTI transmitted by this MARS."
+    ::= { marsStatEntry 1 }
+
+marsStatTxGrpLstRplyMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_GROUPLIST_REPLY messages transmitted
+         by this MARS."
+    ::= { marsStatEntry 2 }
+
+marsStatTxRedirectMapMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_REDIRECT_MAP messages transmitted by
+         this MARS."
+    ::= { marsStatEntry 3 }
+
+marsStatTxMigrateMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MIGRATE messages transmitted by
+         this MARS."
+    ::= { marsStatEntry 4 }
+
+marsStatTxNakMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_NAK messages transmitted by this MARS."
+    ::= { marsStatEntry 5 }
+
+marsStatTxJoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_JOIN messages transmitted by this
+
+         MARS."
+    ::= { marsStatEntry 6 }
+
+marsStatTxLeaveMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_LEAVE messages transmitted by this
+         MARS."
+    ::= { marsStatEntry 7 }
+
+marsStatTxSjoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_SJOIN messages transmitted by this
+         MARS."
+    ::= { marsStatEntry 8 }
+
+marsStatTxSleaveMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_SLEAVE messages transmitted by this
+         MARS."
+    ::= { marsStatEntry 9 }
+
+marsStatTxMservMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MSERV messages transmitted by this
+         MARS."
+    ::= { marsStatEntry 10 }
+
+marsStatTxUnservMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_UNSERV messages transmitted by this
+         MARS."
+    ::= { marsStatEntry 11 }
+
+marsStatRxReqMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_REQUEST messages received by this
+         MARS."
+    ::= { marsStatEntry 12 }
+
+marsStatRxGrpLstReqMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_GROUPLIST_REQUEST messages received
+         by this MARS."
+    ::= { marsStatEntry 13 }
+
+marsStatRxJoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_JOINS messages received by this MARS."
+    ::= { marsStatEntry 14 }
+
+marsStatRxLeaveMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_LEAVES messages received by this MARS."
+    ::= { marsStatEntry 15 }
+
+marsStatRxMservMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MSERV messages received by this MARS."
+    ::= { marsStatEntry 16 }
+
+marsStatRxUnservMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_UNSERV messages received by this MARS."
+    ::= { marsStatEntry 17 }
+
+marsStatRxBlkJoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of block joins messages received by this MARS."
+    ::= { marsStatEntry 18 }
+
+marsStatRegMemGroups OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of IP multicast groups with 1 or more joined
+         cluster members."
+    ::= { marsStatEntry 19 }
+
+marsStatRegMcsGroups OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of IP multicast groups with 1 or more joined
+         MCSs."
+    ::= { marsStatEntry 20 }
+
+--***************************************************************
+--  IP ATM MARS MCS Object Definitions
+--***************************************************************
+
+marsMcsObjects OBJECT IDENTIFIER ::= { marsMIB 3 }
+
+marsMcsTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsMcsEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "The objects defined in this table are used for
+         the management of a multicast server (MCS)."
+    ::= {  marsMcsObjects 1 }
+
+marsMcsEntry OBJECT-TYPE
+    SYNTAX  MarsMcsEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry contains a MCS and its associated
+         attributes."
+    INDEX { marsMcsIndex, marsMcsIfIndex }
+    ::= { marsMcsTable 1 }
+
+MarsMcsEntry ::=
+    SEQUENCE {
+        marsMcsIndex                    Integer32,
+        marsMcsIfIndex                  InterfaceIndex,
+        marsMcsAddr                     AtmAddr,
+        marsMcsDefaultMarsAddr          AtmAddr,
+        marsMcsRegistration             INTEGER,
+        marsMcsSsn                      Unsigned32,
+        marsMcsDefaultMtu               INTEGER,
+        marsMcsFailureTimer             INTEGER,
+        marsMcsRetranDelayTimer         INTEGER,
+        marsMcsRdmMulReqAddRetrTimer    INTEGER,
+        marsMcsRdmVcRevalidateTimer     INTEGER,
+        marsMcsRegisterRetrInterval     INTEGER,
+        marsMcsRegisterRetrLimit        INTEGER,
+        marsMcsRegWithMarsRdmTimer      INTEGER,
+        marsMcsForceWaitTimer           INTEGER,
+        marsMcsIdleTimer                INTEGER,
+        marsMcsLmtToMissRedirMapTimer   INTEGER,
+        marsMcsRowStatus                RowStatus
+    }
+
+marsMcsIndex OBJECT-TYPE
+    SYNTAX  Integer32(1..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The auxiliary variable used to identify instances
+         of the columnar objects in the MCS table."
+    ::= { marsMcsEntry 1 }
+
+marsMcsIfIndex OBJECT-TYPE
+    SYNTAX  InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The ifIndex of the interface that the MCS is
+         associated with."
+    ::= { marsMcsEntry 2 }
+
+marsMcsAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The ATM address associated with the MCS."
+    ::= { marsMcsEntry 3 }
+
+marsMcsDefaultMarsAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The default MARS ATM address which is needed to
+         setup the initial signalling path between a MCS
+         and its associated MARS."
+    ::= { marsMcsEntry 4 }
+
+marsMcsRegistration OBJECT-TYPE
+    SYNTAX  INTEGER {
+          notRegistered (1),
+          registering (2),
+          registered (3),
+          reRegisteringFault (4),
+          reRegisteringRedirMap (5)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "An indication with regards to the registration
+         STATUS of this MCS. The registration codes of
+         'notRegistered (1)', 'registered (2)', and
+         registered (3) are self-explanatory. The
+         'reRegisteringFault (4)' indicates the MCS is
+         in the process of re-registering with a MARS due
+         to some fault conditions.  The 'reRegisteringRedMap
+         (5)' status code shows that MCS is re-registering
+         because it has received a MARS_REDIRECT_MAP message
+         and was told to register with a shift MARS."
+    ::= { marsMcsEntry 5 }
+
+marsMcsSsn OBJECT-TYPE
+    SYNTAX  Unsigned32
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The MCS own 32 bit Server Sequence Number.  It
+         is used to track the Mars sequence number."
+    ::= { marsMcsEntry 6 }
+
+marsMcsDefaultMtu OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The default maximum transmission unit (MTU) used
+         for this cluster.  Note that the actual size used
+         for a VC between two members of the cluster may be
+         negotiated during connection setup and may be
+         different than this value.
+         Default value = 9180 bytes."
+    DEFVAL { 9180 }
+    ::= { marsMcsEntry 7 }
+
+marsMcsFailureTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "A timer used to flag the failure of last MARS_MULTI
+         to arrive.  Default value = 10 seconds (recommended)."
+    DEFVAL { 10 }
+    ::= { marsMcsEntry 8 }
+
+marsMcsRetranDelayTimer OBJECT-TYPE
+    SYNTAX  INTEGER (5..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The delay timer for sending out new MARS_REQUEST
+         for the group after the MCS learned that there
+         is no other group in the cluster.  The timer must
+         be set between 5 and 10 seconds inclusive."
+    ::= { marsMcsEntry 9 }
+
+marsMcsRdmMulReqAddRetrTimer OBJECT-TYPE
+    SYNTAX  INTEGER (5..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The initial random L_MULTI_RQ/ADD retransmit timer
+         which can be set between 5 and 10 seconds inclusive."
+    ::= { marsMcsEntry 10 }
+
+marsMcsRdmVcRevalidateTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The random time to set VC_revalidate flag.  The
+         timer value ranges between 1 and 10 seconds
+            inclusive."
+    ::= { marsMcsEntry 11 }
+
+marsMcsRegisterRetrInterval OBJECT-TYPE
+    SYNTAX  INTEGER(5..2147483647)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "MARS_MSERV/UNSERV retransmit interval. The minimum
+         and recommended values are 5 and 10 seconds,
+         respectively."
+    DEFVAL { 10 }
+    ::= { marsMcsEntry 12 }
+
+marsMcsRegisterRetrLimit OBJECT-TYPE
+    SYNTAX  INTEGER (0..5)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "MARS_MSERV/UNSERV retransmit limit. The maximum value
+         is 5."
+    ::= { marsMcsEntry 13 }
+
+marsMcsRegWithMarsRdmTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..10)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Random time for a MCS to register with a MARS."
+    ::= { marsMcsEntry 14 }
+
+marsMcsForceWaitTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Force wait if MARS re-registration is looping.
+         The minimum value is 1 minute."
+    ::= { marsMcsEntry 15 }
+
+marsMcsLmtToMissRedirMapTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..4)
+    UNITS   "seconds"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Timer limit for MCS to miss MARS_REDIRECT_MAPS."
+    ::= { marsMcsEntry 16 }
+
+marsMcsIdleTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The configurable inactivity timer associated with a
+         MCS. When a VC is created at this MCS, it gets
+         the idle timer value from this configurable timer.
+         The minimum suggested value is 1 minute and the
+         recommended default value is 20 minutes."
+    DEFVAL { 20 }
+    ::= { marsMcsEntry 17 }
+
+marsMcsRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         A row cannot be made 'active' until instances of
+         all corresponding columns in the row of this table
+         are appropriately configured and until the agent
+         has also created a corresponding row in the
+         marsMcsStatTable.
+
+         When this object has a value of 'active', the
+         following columnar objects can not be modified:
+
+           marsMcsDefaultMarsAddr,
+           marsMcsSsn,
+           marsMcsRegstration,
+           marsMcsDefaultMtu
+
+         while other objects in this conceptual row can be
+         modified irrespective of the value of this object.
+
+         Deletion of this row is allowed regardless of
+         whether or not a row in any associated tables
+         (i.e., marsMcsVcTable) still exists or is in
+         use. Once this row is deleted, it is recommended
+         that the agent or the SNMP management station
+         (if possible) through the set command deletes
+         any stale rows that are associated with this
+         row."
+    ::= { marsMcsEntry 18 }
+
+--****************************************************************
+-- IP ATM MARS MCS Multicast Group Address Object Definitions
+--****************************************************************
+
+marsMcsMcGrpTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsMcsMcGrpEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains a list of IP multicast group address
+         blocks associated by a MARS MCS.  The MCS uses the
+         information contained in list to advertise its multicast
+         group service to the MARS.
+         Each row can be created or deleted via configuration."
+    ::= { marsMcsObjects 2 }
+
+marsMcsMcGrpEntry OBJECT-TYPE
+    SYNTAX  MarsMcsMcGrpEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry represents a consecutive block of multicast
+         group addresses."
+    INDEX { marsMcsIndex,
+            marsMcsIfIndex,
+            marsMcsMcMinGrpAddr,
+            marsMcsMcMaxGrpAddr }
+    ::= { marsMcsMcGrpTable 1 }
+
+MarsMcsMcGrpEntry ::=
+    SEQUENCE {
+        marsMcsMcMinGrpAddr           IpAddress,
+        marsMcsMcMaxGrpAddr           IpAddress,
+        marsMcsMcGrpRowStatus         RowStatus
+    }
+
+marsMcsMcMinGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Minimum multicast group address - the min and max
+         multicast forms multi-group block.  If the MinGrpAddr
+         and MaxGrpAddr are the same, it indicates that this
+         block contains a single group address.   Since the
+         block joins are no allowed by a MCS as implied in
+         the RFC2022, the MinGrpAddr and MaxGrpAddress should
+         be set to the same value at this time when an entry
+         row is created."
+    ::= { marsMcsMcGrpEntry 1 }
+
+marsMcsMcMaxGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Maximum multicast group address - the min and max
+         multicast forms a multi-group block.  If the
+         MinGrpAddr and MaxGrpAddr are the same, it indicates
+         that this block contains a single group address.
+         Since the block joins are no allowed by a MCS as
+         implied in the RFC2022, the MinGrpAddr and
+         MaxGrpAddress should be set to the same value at
+         this time when an entry row is created."
+    ::= { marsMcsMcGrpEntry 2 }
+
+marsMcsMcGrpRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create or delete a row in this
+         table.
+
+         Since other objects in this row are not-accessible
+         'index-objects', the value of this object has no
+         effect on whether those objects in this conceptual
+         row can be modified."
+    ::= { marsMcsMcGrpEntry 3 }
+
+--****************************************************************
+-- IP ATM MARS MCS Backup MARS Object Definitions
+--****************************************************************
+
+marsMcsBackupMarsTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsMcsBackupMarsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains a list of backup MARS addresses that
+         a MCS can make contact to in case of failure for
+         connecting to the primary server. The list of addresses
+         is in descending order of preference. It should be noted
+         that the backup list provided by the MARS to the MCS
+         via the MARS_REDIRECT_MAP message has a higher preference
+         than addresses that are manually configured into the MCS.
+         When such a list is received from the MARS, this information
+         should be inserted at the top of the list.
+         Each row can be created or deleted via configuration."
+    ::= {  marsMcsObjects 3 }
+
+marsMcsBackupMarsEntry OBJECT-TYPE
+    SYNTAX  MarsMcsBackupMarsEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry represents an ATM address of a backup MARS."
+    INDEX { marsMcsIndex,
+            marsMcsIfIndex,
+            marsMcsBackupMarsPriority,
+            marsMcsBackupMarsAddr }
+    ::= { marsMcsBackupMarsTable 1 }
+
+MarsMcsBackupMarsEntry ::=
+    SEQUENCE {
+        marsMcsBackupMarsPriority     Unsigned32,
+        marsMcsBackupMarsAddr         AtmAddr,
+        marsMcsBackupMarsRowStatus    RowStatus
+    }
+
+marsMcsBackupMarsPriority OBJECT-TYPE
+    SYNTAX  Unsigned32(0..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The priority associated with a backup MARS. A lower
+         priority value inidcates a higher preference."
+    ::= { marsMcsBackupMarsEntry 1 }
+
+marsMcsBackupMarsAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The ATM address associated with a backup MARS."
+    ::= { marsMcsBackupMarsEntry 2 }
+
+marsMcsBackupMarsRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create or delete a row in this
+         table.
+
+         Since other objects in this row are not-accessible
+         'index-objects', the value of this object has no
+         effect on whether those objects in this conceptual
+         row can be modified."
+    ::= { marsMcsBackupMarsEntry 3 }
+
+--***************************************************************
+--  IP ATM MARS MCS VC Object Definition Table
+--***************************************************************
+
+marsMcsVcTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsMcsVcEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "This table contains information about open virtual
+         circuits (VCs) that a MCS has.  For point to
+         point circuit, each entry represents a single VC
+         connection between this MCS ATM address to another
+         party ATM address.  In the case of point to
+         multipoint connection where a single source address
+         is associated with multiple destinations, several
+         entries are used to represent the relationship.  An
+         example of point to multi-point VC represented in a
+         table is shown below.
+
+            MCS      VPI/VCI    Grp Addr1/Addr2    Part Addr
+             1         0,1          g1,g2             p1
+             1         0,1          g1,g2             p2
+             1         0,1          g1,g2             p3"
+    ::= {  marsMcsObjects 4 }
+
+marsMcsVcEntry OBJECT-TYPE
+    SYNTAX  MarsMcsVcEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The objects contained in the entry are VC related
+         attributes such as VC signalling type, control VC
+         type, idle timer, negotiated MTU size, etc."
+    INDEX { marsMcsIndex,
+            marsMcsIfIndex,
+            marsMcsVcVpi,
+            marsMcsVcVci,
+            marsMcsVcMinGrpAddr,
+            marsMcsVcMaxGrpAddr,
+            marsMcsVcPartyAddr }
+    ::= { marsMcsVcTable 1 }
+
+MarsMcsVcEntry ::=
+    SEQUENCE {
+        marsMcsVcVpi           INTEGER,
+        marsMcsVcVci           INTEGER,
+        marsMcsVcMinGrpAddr    IpAddress,
+        marsMcsVcMaxGrpAddr    IpAddress,
+        marsMcsVcPartyAddr     AtmAddr,
+        marsMcsVcPartyAddrType INTEGER,
+        marsMcsVcType          INTEGER,
+        marsMcsVcCtrlType      INTEGER,
+        marsMcsVcIdleTimer     INTEGER,
+        marsMcsVcRevalidate    TruthValue,
+        marsMcsVcEncapsType    INTEGER,
+        marsMcsVcNegotiatedMtu INTEGER,
+        marsMcsVcRowStatus     RowStatus
+    }
+
+marsMcsVcVpi OBJECT-TYPE
+    SYNTAX  INTEGER (0..4095)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The value of virtual path identifier (VPI). Since
+         a VPI can be numbered 0, this sub-index can take
+         a value of 0."
+    ::= { marsMcsVcEntry 1 }
+
+marsMcsVcVci OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+         "The value of virtual circuit identifier (VCI). Since
+         a VCI can be numbered 0, this sub-index can take
+         a value of 0."
+     ::= { marsMcsVcEntry 2 }
+
+marsMcsVcMinGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Minimum IP multicast group address - the min and
+         max multicast forms a multi-group block which is
+         associated with a VC.  If the MinGrpAddr and
+         MaxGrpAddr are the same, it indicates that the
+         size of multi-group block is 1, a single IP group."
+    ::= { marsMcsVcEntry 3 }
+
+marsMcsVcMaxGrpAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Maximum IP multicast group address - the min
+         and max multicast forms a multi-group block
+         which is associated with a VC. If the MinGrpAddr
+         and MaxGrpAddr are the same, it indicates that the
+         size of multi-group block is 1, a single IP group."
+    ::= { marsMcsVcEntry 4 }
+
+marsMcsVcPartyAddr OBJECT-TYPE
+    SYNTAX  AtmAddr
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An ATM party address in which this VC is linked.
+         The party type is identified by the
+         marsMcsVcPartyAddrType."
+    ::= { marsMcsVcEntry 5 }
+
+marsMcsVcPartyAddrType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          called (1),
+          calling (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The party type is associated with the party address.
+         The called (1) indicates that the party address is
+
+         a destination address which implies that VC is
+         originated from this MCS.  The calling (2) indicates
+         the VC was initiated externally to this MCS.  In this
+         case, the party address is the source address."
+    ::= { marsMcsVcEntry 6 }
+
+marsMcsVcType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          pvc (1),
+          svc (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Circuit Connection type: permanent virtual circuit or
+         switched virtual circuit."
+    ::= { marsMcsVcEntry 7 }
+
+marsMcsVcCtrlType OBJECT-TYPE
+    SYNTAX  INTEGER {
+           pointToPointVC (1),
+           serverControlVC (2),
+           pointToMultiPointVC (3)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "Control VC type used to specify a particular connection.
+           pointToPointVC (1):
+             used by the ATM Clients for the registration and
+             queries.  This VC or the initial signalling path is
+             set up from the source MCS to a MARS. It is
+             bi-directional.
+           serverControlVC (2):
+             used by a MARS to issue asynchronous updates to an
+             ATM Client.  This VC is established from the MARS
+             to the MCS.
+           pointToMultiPointVC (3):
+             used by the client to transfer multicast data
+             packets from layer 3.  This VC is established from
+             this VC to a cluster member."
+    ::= { marsMcsVcEntry 8 }
+
+marsMcsVcIdleTimer OBJECT-TYPE
+    SYNTAX  INTEGER (1..2147483647)
+    UNITS   "minutes"
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The idle timer associated with this VC. The minimum
+         suggested value is 1 minute and the recommended
+         default value is 20 minutes."
+    DEFVAL { 20 }
+    ::= { marsMcsVcEntry 9 }
+
+marsMcsVcRevalidate OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "A flag associated with an open and active multipoint
+         VC. It is checked every time a packet is queued for
+         transmission on that VC. The object has the value of
+         true (1) if revalidate is required and the value
+         false (2) otherwise."
+    ::= { marsMcsVcEntry 10 }
+
+marsMcsVcEncapsType OBJECT-TYPE
+    SYNTAX  INTEGER {
+          other (1),
+          llcSnap (2)
+        }
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The encapsulation type used when communicating over
+         this VC."
+    ::= { marsMcsVcEntry 11 }
+
+marsMcsVcNegotiatedMtu OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The negotiated MTU when communicating over this VC."
+    ::= { marsMcsVcEntry 12 }
+
+marsMcsVcRowStatus OBJECT-TYPE
+    SYNTAX  RowStatus
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object is used to create, delete or modify a
+         row in this table.
+
+         A row cannot be made 'active' until instances of
+         all corresponding columns in the row of this table
+         are appropriately configured.
+
+         While objects: marsMcsVcIdleTimer and
+         marsMcsVcRevalidate in this conceptual row can
+         be modified irrespective of the value of this
+         object, all other objects in the row can not be
+         modified when this object has a value of 'active'.
+
+         It is possible for an SNMP management station
+         to set the row to 'notInService' and modify
+         the entry and then set it back to 'active'
+         with the following exception. That is, rows
+         for which the corresponding instance of
+         marsMcsVcType has a value of 'svc' can not
+         be modified or deleted."
+    ::= { marsMcsVcEntry 13 }
+
+--***************************************************************
+--  IP ATM MARS MCS Statistics Definition Table
+--***************************************************************
+
+marsMcsStatTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MarsMcsStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS current
+    DESCRIPTION
+        "The table contains statistics collected at MARS MCSs."
+    ::= {  marsMcsObjects 5 }
+
+marsMcsStatEntry OBJECT-TYPE
+    SYNTAX  MarsMcsStatEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "Each entry contains statistics collected at one
+         MARS MCS."
+    INDEX { marsMcsIndex, marsMcsIfIndex }
+    ::= { marsMcsStatTable 1 }
+
+MarsMcsStatEntry ::=
+    SEQUENCE {
+        marsMcsStatTxReqMsgs       Counter32,
+        marsMcsStatTxMservMsgs     Counter32,
+        marsMcsStatTxUnservMsgs    Counter32,
+        marsMcsStatRxMultiMsgs     Counter32,
+        marsMcsStatRxSjoinMsgs     Counter32,
+        marsMcsStatRxSleaveMsgs    Counter32,
+        marsMcsStatRxNakMsgs       Counter32,
+        marsMcsStatRxMigrateMsgs   Counter32,
+        marsMcsStatFailMultiMsgs   Counter32
+    }
+
+marsMcsStatTxReqMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_REQUEST messages transmitted
+         from this MCS."
+    ::= { marsMcsStatEntry 1 }
+
+marsMcsStatTxMservMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MSERV messages transmitted from
+         this MCS."
+    ::= { marsMcsStatEntry 2 }
+
+marsMcsStatTxUnservMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_UNSERV messages transmitted from
+         this MCS."
+    ::= { marsMcsStatEntry 3 }
+
+marsMcsStatRxMultiMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MULTI messages received by
+         this MCS."
+    ::= { marsMcsStatEntry 4 }
+
+marsMcsStatRxSjoinMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_SJOIN messages received by
+
+         this MCS."
+    ::= { marsMcsStatEntry 5 }
+
+marsMcsStatRxSleaveMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_SLEAVE messages received
+         by this MCS."
+    ::= { marsMcsStatEntry 6 }
+
+marsMcsStatRxNakMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_NAK messages received
+         by this MCS."
+    ::= { marsMcsStatEntry 7 }
+
+marsMcsStatRxMigrateMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of MARS_MIGRATE messages received
+         by this MCS."
+    ::= { marsMcsStatEntry 8 }
+
+marsMcsStatFailMultiMsgs OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS read-only
+    STATUS  current
+    DESCRIPTION
+        "Total number of timeouts occurred indicating
+         failure of the last MARS_MULTI to arrive."
+    ::= { marsMcsStatEntry 9 }
+
+--***************************************************************
+--  IP ATM MARS Notification Definitions
+--***************************************************************
+
+marsTrapInfo OBJECT IDENTIFIER ::= { marsMIB 0 }
+
+marsFaultTrap NOTIFICATION-TYPE
+    OBJECTS {
+        marsAddr,
+        marsServStatus
+       }
+    STATUS  current
+    DESCRIPTION
+        "This trap/inform is sent to the manager whenever
+         there is a fault condition occurred on a MARS."
+    ::= { marsTrapInfo 1 }
+
+--***************************************************************
+--  IP ATM MARS Conformance Definitions
+--***************************************************************
+
+marsConformance       OBJECT IDENTIFIER ::= { marsMIB 4 }
+marsClientConformance OBJECT IDENTIFIER ::= { marsConformance 1 }
+marsServerConformance OBJECT IDENTIFIER ::= { marsConformance 2 }
+marsMcsConformance    OBJECT IDENTIFIER ::= { marsConformance 3 }
+
+marsClientCompliances OBJECT IDENTIFIER ::= { marsClientConformance 1 }
+marsClientGroups      OBJECT IDENTIFIER ::= { marsClientConformance 2 }
+
+marsServerCompliances OBJECT IDENTIFIER ::= { marsServerConformance 1 }
+
+marsServerGroups      OBJECT IDENTIFIER ::= { marsServerConformance 2 }
+
+marsMcsCompliances    OBJECT IDENTIFIER ::= { marsMcsConformance 1 }
+marsMcsGroups         OBJECT IDENTIFIER ::= { marsMcsConformance 2 }
+
+--***************************************************************
+-- MARS Client Compliance Statements
+--***************************************************************
+
+marsClientCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for entities that are required
+         for the management of MARS clients."
+    MODULE
+        MANDATORY-GROUPS {
+         marsClientGroup
+        }
+
+    OBJECT marsClientAddr
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientDefaultMarsAddr
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientHsn
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientRegistration
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientCmi
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientDefaultMtu
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientFailureTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientRetranDelayTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientRdmMulReqAddRetrTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientRdmVcRevalidateTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientJoinLeaveRetrInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientJoinLeaveRetrLimit
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientRegWithMarsRdmTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientForceWaitTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientLmtToMissRedirMapTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientIdleTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientMcGrpRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientBackupMarsRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcCtrlType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcIdleTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcRevalidate
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcEncapsType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcNegotiatedMtu
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsClientVcRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+    ::= { marsClientCompliances 1 }
+
+marsClientGroup OBJECT-GROUP
+    OBJECTS {
+        marsClientAddr,
+        marsClientDefaultMarsAddr,
+        marsClientHsn,
+        marsClientRegistration,
+        marsClientCmi,
+        marsClientDefaultMtu,
+        marsClientFailureTimer,
+        marsClientRetranDelayTimer,
+        marsClientRdmMulReqAddRetrTimer,
+        marsClientRdmVcRevalidateTimer,
+        marsClientJoinLeaveRetrInterval,
+        marsClientJoinLeaveRetrLimit,
+        marsClientRegWithMarsRdmTimer,
+        marsClientForceWaitTimer,
+        marsClientIdleTimer,
+        marsClientLmtToMissRedirMapTimer,
+        marsClientRowStatus,
+        marsClientMcGrpRowStatus,
+        marsClientBackupMarsRowStatus,
+        marsClientVcPartyAddrType,
+        marsClientVcType,
+        marsClientVcCtrlType,
+        marsClientVcIdleTimer,
+        marsClientVcRevalidate,
+        marsClientVcEncapsType,
+        marsClientVcNegotiatedMtu,
+        marsClientVcRowStatus,
+        marsClientStatTxReqMsgs,
+        marsClientStatTxJoinMsgs,
+        marsClientStatTxLeaveMsgs,
+        marsClientStatTxGrpLstReqMsgs,
+        marsClientStatRxJoinMsgs,
+        marsClientStatRxLeaveMsgs,
+        marsClientStatRxMultiMsgs,
+        marsClientStatRxNakMsgs,
+        marsClientStatRxGrpLstRplyMsgs,
+        marsClientStatRxMigrateMsgs,
+        marsClientStatFailMultiMsgs
+       }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects to be implemented in a MIB
+         for the management of MARS clients."
+    ::= { marsClientGroups 1 }
+
+--***************************************************************
+-- MARS Server Compliance Statements
+--***************************************************************
+
+marsServerCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for entities that are required
+         for the management of MARS servers."
+    MODULE -- this module
+        MANDATORY-GROUPS {
+         marsServerGroup,
+         marsServerEventGroup
+        }
+
+    OBJECT marsAddr
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsLocal
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsServStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsServType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsServPriority
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsRedirMapMsgTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsCsn
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsSsn
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcGrpAddrUsage
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcGrpRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsHostMapRowType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsHostMapRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsServerMapRowType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsServerMapRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcPartyAddrType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcCtrlType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcIdleTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcCmi
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcEncapsType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcNegotiatedMtu
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsVcRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+    ::= { marsServerCompliances 1 }
+
+marsServerGroup OBJECT-GROUP
+      OBJECTS {
+        marsAddr,
+        marsLocal,
+        marsServStatus,
+        marsServType,
+        marsServPriority,
+        marsRedirMapMsgTimer,
+        marsCsn,
+        marsSsn,
+        marsRowStatus,
+        marsMcGrpAddrUsage,
+        marsMcGrpRxLayer3GrpSets,
+        marsMcGrpRxLayer3GrpResets,
+        marsMcGrpRowStatus,
+        marsHostMapRowType,
+        marsHostMapRowStatus,
+        marsServerMapRowType,
+        marsServerMapRowStatus,
+        marsVcPartyAddrType,
+        marsVcType,
+        marsVcCtrlType,
+        marsVcIdleTimer,
+        marsVcCmi,
+        marsVcEncapsType,
+        marsVcNegotiatedMtu,
+        marsVcRowStatus,
+        marsRegClientAtmAddr,
+        marsRegMcsAtmAddr,
+        marsStatTxMultiMsgs,
+        marsStatTxGrpLstRplyMsgs,
+        marsStatTxRedirectMapMsgs,
+        marsStatTxMigrateMsgs,
+        marsStatTxNakMsgs,
+        marsStatTxJoinMsgs,
+        marsStatTxLeaveMsgs,
+        marsStatTxSjoinMsgs,
+        marsStatTxSleaveMsgs,
+        marsStatTxMservMsgs,
+        marsStatTxUnservMsgs,
+        marsStatRxReqMsgs,
+        marsStatRxGrpLstReqMsgs,
+        marsStatRxJoinMsgs,
+        marsStatRxLeaveMsgs,
+        marsStatRxMservMsgs,
+        marsStatRxUnservMsgs,
+        marsStatRxBlkJoinMsgs,
+        marsStatRegMemGroups,
+        marsStatRegMcsGroups
+       }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects to be implemented in a MIB
+         for the management of MARS servers."
+    ::= { marsServerGroups 1 }
+
+marsServerEventGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { marsFaultTrap }
+    STATUS  current
+    DESCRIPTION
+        "A collection of events that can be generated from
+         a MARS server."
+    ::= { marsServerGroups 2 }
+
+--***************************************************************
+-- MARS Multicast Server (MCS) Compliance Statements
+--***************************************************************
+
+marsMcsCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for entities that are required
+         for the management of MARS multicast servers (MCS)."
+    MODULE
+        MANDATORY-GROUPS {
+         marsMcsGroup
+        }
+
+    OBJECT marsMcsAddr
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsDefaultMarsAddr
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRegistration
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsSsn
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsDefaultMtu
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsFailureTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRetranDelayTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRdmMulReqAddRetrTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRdmVcRevalidateTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRegisterRetrInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRegisterRetrLimit
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsForceWaitTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsLmtToMissRedirMapTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsIdleTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsMcGrpRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsBackupMarsRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcPartyAddrType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcCtrlType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcIdleTimer
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcRevalidate
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcEncapsType
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcNegotiatedMtu
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+
+    OBJECT marsMcsVcRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+      "Write access is not required."
+    ::= { marsMcsCompliances 1 }
+
+marsMcsGroup OBJECT-GROUP
+    OBJECTS {
+        marsMcsAddr,
+        marsMcsDefaultMarsAddr,
+        marsMcsRegistration,
+        marsMcsSsn ,
+        marsMcsDefaultMtu,
+        marsMcsFailureTimer,
+        marsMcsRetranDelayTimer,
+        marsMcsRdmMulReqAddRetrTimer,
+        marsMcsRdmVcRevalidateTimer,
+        marsMcsRegisterRetrInterval,
+        marsMcsRegisterRetrLimit,
+        marsMcsRegWithMarsRdmTimer,
+        marsMcsForceWaitTimer,
+        marsMcsIdleTimer,
+        marsMcsLmtToMissRedirMapTimer,
+        marsMcsRowStatus,
+        marsMcsMcGrpRowStatus,
+        marsMcsVcPartyAddrType,
+        marsMcsBackupMarsRowStatus,
+        marsMcsVcType,
+        marsMcsVcCtrlType,
+        marsMcsVcIdleTimer,
+        marsMcsVcRevalidate,
+        marsMcsVcEncapsType,
+        marsMcsVcNegotiatedMtu,
+        marsMcsVcRowStatus,
+        marsMcsStatTxReqMsgs,
+        marsMcsStatTxMservMsgs,
+        marsMcsStatTxUnservMsgs,
+        marsMcsStatRxMultiMsgs,
+        marsMcsStatRxSjoinMsgs,
+        marsMcsStatRxSleaveMsgs,
+        marsMcsStatRxNakMsgs,
+        marsMcsStatRxMigrateMsgs,
+        marsMcsStatFailMultiMsgs
+       }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects to be implemented in a MIB
+         for the management of MARS multicast servers (MCS)."
+    ::= { marsMcsGroups 1 }
+
+   END
\ No newline at end of file
diff --git a/snmp_builder/mibs/IPFIX-MIB.mib b/snmp_builder/mibs/IPFIX-MIB.mib
new file mode 100644
index 0000000..bb6158f
--- /dev/null
+++ b/snmp_builder/mibs/IPFIX-MIB.mib
@@ -0,0 +1,1677 @@
+IPFIX-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2, Unsigned32, Counter64,
+    Gauge32
+        FROM SNMPv2-SMI                                -- RFC2578
+    TimeStamp, DateAndTime
+        FROM SNMPv2-TC                                 -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                               -- RFC2580
+    InterfaceIndexOrZero
+        FROM IF-MIB                                    -- RFC2863
+    InetAddressType, InetAddress, InetPortNumber
+        FROM INET-ADDRESS-MIB                          -- RFC4001
+    PhysicalIndexOrZero
+        FROM ENTITY-MIB;                               -- RFC4133
+
+ipfixMIB MODULE-IDENTITY
+    LAST-UPDATED "201004190000Z"         -- 19 April 2010
+    ORGANIZATION "IETF IPFIX Working Group"
+    CONTACT-INFO
+        "WG charter:
+          http://www.ietf.org/html.charters/ipfix-charter.html
+
+        Mailing Lists:
+          General Discussion: ipfix@ietf.org
+          To Subscribe: http://www1.ietf.org/mailman/listinfo/ipfix
+          Archive:
+      http://www1.ietf.org/mail-archive/web/ipfix/current/index.html
+
+        Editor:
+          Thomas Dietz
+          NEC Europe Ltd.
+          NEC Laboratories Europe
+          Network Research Division
+          Kurfuersten-Anlage 36
+          69115 Heidelberg
+          Germany
+          Phone: +49 6221 4342-128
+          Email: Thomas.Dietz@nw.neclab.eu
+
+          Atsushi Kobayashi
+          NTT Information Sharing Platform Laboratories
+          3-9-11 Midori-cho
+          Musashino-shi
+          180-8585
+          Japan
+          Phone: +81-422-59-3978
+          Email: akoba@nttv6.net
+
+          Benoit Claise
+          Cisco Systems, Inc.
+          De Kleetlaan 6a b1
+          Degem 1831
+          Belgium
+          Phone:  +32 2 704 5622
+          Email: bclaise@cisco.com
+
+          Gerhard Muenz
+          Technische Universitaet Muenchen
+          Department of Informatics
+          Chair for Network Architectures and Services (I8)
+          Boltzmannstr. 3
+          85748 Garching
+          Germany
+          Phone: +49 89 289-18008
+          Email: muenz@net.in.tum.de
+          URI:   http://www.net.in.tum.de/~muenz"
+    DESCRIPTION
+        "The IPFIX MIB defines managed objects for IP Flow
+        Information eXport.  These objects provide information about
+        managed nodes supporting the IPFIX protocol,
+        for Exporters as well as for Collectors.
+
+        Copyright (c) 2010 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, is permitted pursuant to, and subject
+        to the license terms contained in, the Simplified BSD
+        License set forth in Section 4.c of the IETF Trust's
+        Legal Provisions Relating to IETF Documents
+        (http://trustee.ietf.org/license-info)."
+
+--  Revision history
+
+     REVISION     "201004190000Z"         -- 19 April 2010
+     DESCRIPTION
+        "Initial version, published as RFC 5815."
+    ::= { mib-2 193 }
+
+--******************************************************************
+-- Top Level Structure of the MIB
+--******************************************************************
+
+ipfixObjects     OBJECT IDENTIFIER ::= { ipfixMIB 1 }
+ipfixConformance OBJECT IDENTIFIER ::= { ipfixMIB 2 }
+
+ipfixMainObjects OBJECT IDENTIFIER ::= { ipfixObjects 1 }
+ipfixStatistics  OBJECT IDENTIFIER ::= { ipfixObjects 2 }
+
+--==================================================================
+-- 1.1: Objects used by all IPFIX implementations
+--==================================================================
+--------------------------------------------------------------------
+-- 1.1.1: Transport Session Table
+--------------------------------------------------------------------
+ipfixTransportSessionTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixTransportSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the currently established Transport
+        Sessions between an Exporting Process and a Collecting
+        Process."
+    ::= { ipfixMainObjects 1 }
+
+ipfixTransportSessionEntry OBJECT-TYPE
+    SYNTAX      IpfixTransportSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixTransportSessionTable."
+    INDEX       { ipfixTransportSessionIndex }
+    ::= { ipfixTransportSessionTable 1 }
+
+IpfixTransportSessionEntry ::=
+    SEQUENCE {
+       ipfixTransportSessionIndex                  Unsigned32,
+       ipfixTransportSessionProtocol               Unsigned32,
+       ipfixTransportSessionSourceAddressType      InetAddressType,
+       ipfixTransportSessionSourceAddress          InetAddress,
+       ipfixTransportSessionDestinationAddressType InetAddressType,
+       ipfixTransportSessionDestinationAddress     InetAddress,
+       ipfixTransportSessionSourcePort             InetPortNumber,
+       ipfixTransportSessionDestinationPort        InetPortNumber,
+       ipfixTransportSessionSctpAssocId            Unsigned32,
+       ipfixTransportSessionDeviceMode             INTEGER,
+       ipfixTransportSessionTemplateRefreshTimeout Unsigned32,
+       ipfixTransportSessionOptionsTemplateRefreshTimeout Unsigned32,
+       ipfixTransportSessionTemplateRefreshPacket  Unsigned32,
+       ipfixTransportSessionOptionsTemplateRefreshPacket Unsigned32,
+       ipfixTransportSessionIpfixVersion           Unsigned32,
+       ipfixTransportSessionStatus                 INTEGER
+    }
+
+ipfixTransportSessionIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Locally arbitrary, but unique identifier of an entry in
+        the ipfixTransportSessionTable.  The value is expected to
+        remain constant from a re-initialization of the entity's
+        network management agent to the next re-initialization."
+    ::= { ipfixTransportSessionEntry 1 }
+
+ipfixTransportSessionProtocol OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The transport protocol used for receiving or transmitting
+        IPFIX Messages.  Protocol numbers are assigned by IANA.  A
+        current list of all assignments is available from
+        <http://www.iana.org/>."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow
+        Information Export (IPFIX) Protocol for the Exchange of IP
+        Traffic Flow Information, Section 10."
+    ::= { ipfixTransportSessionEntry 2 }
+
+ipfixTransportSessionSourceAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of address used for the source address,
+        as specified in RFC 4001.  This object is used with protocols
+        (specified in ipfixTransportSessionProtocol) like TCP (6)
+        and UDP (17) that have the notion of addresses.  SCTP (132)
+        should use the ipfixTransportSessionSctpAssocId instead.
+        If SCTP (132) or any other protocol without the notion of
+        addresses is used, the object MUST be set to unknown(0)."
+    ::= { ipfixTransportSessionEntry 3 }
+
+ipfixTransportSessionSourceAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The source address of the Exporter of the IPFIX Transport
+        Session.  This value is interpreted according to the value of
+        ipfixTransportSessionAddressType as specified in RFC 4001.
+        This object is used with protocols (specified in
+        ipfixTransportSessionProtocol) like TCP (6) and UDP (17) that
+        have the notion of addresses.  SCTP (132) should use the
+        ipfixTransportSessionSctpAssocId instead.  If SCTP (132) or
+        any other protocol without the notion of addresses is used,
+        the object MUST be set to a zero-length string."
+    ::= { ipfixTransportSessionEntry 4 }
+
+ipfixTransportSessionDestinationAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of address used for the destination address,
+        as specified in RFC 4001.  This object is used with protocols
+        (specified in ipfixTransportSessionProtocol) like TCP (6)
+        and UDP (17) that have the notion of addresses.  SCTP (132)
+        should use the ipfixTransportSessionSctpAssocId instead.
+        If SCTP (132) or any other protocol without the notion of
+        addresses is used, the object MUST be set to unknown(0)."
+    ::= { ipfixTransportSessionEntry 5 }
+
+ipfixTransportSessionDestinationAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The destination address of the Collector of the IPFIX
+        Transport Session.  This value is interpreted according to
+        the value of ipfixTransportSessionAddressType, as specified
+        in RFC 4001.  This object is used with protocols
+        (specified in ipfixTransportSessionProtocol) like TCP (6)
+        and UDP (17) that have the notion of addresses.  SCTP (132)
+        should use the ipfixTransportSessionSctpAssocId instead.
+        If SCTP (132) or any other protocol without the notion of
+        addresses is used, the object MUST be set to a zero-length
+        string"
+    ::= { ipfixTransportSessionEntry 6 }
+
+ipfixTransportSessionSourcePort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The transport protocol port number of the Exporter.
+        This object is used with protocols (specified in
+        ipfixTransportSessionProtocol) like TCP (6)
+        and UDP (17) that have the notion of ports.  SCTP (132)
+        should copy the value of sctpAssocLocalPort if the
+        Transport Session is in collecting mode or
+        sctpAssocRemPort if the Transport Session is in
+        exporting mode.  The association is referenced
+        by the ipfixTransportSessionSctpAssocId.
+        If any other protocol without the notion of
+        ports is used, the object MUST be set to zero."
+    ::= { ipfixTransportSessionEntry 7 }
+
+ipfixTransportSessionDestinationPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The transport protocol port number of the Collector.  The
+        default value is 4739 for all currently defined transport
+        protocol types.  This object is used with protocols
+        (specified in ipfixTransportSessionProtocol) like TCP (6)
+        and UDP (17) that have the notion of ports.  SCTP (132)
+        should copy the value of sctpAssocRemPort if the
+        Transport Session is in collecting mode or
+        sctpAssocLocalPort if the Transport Session is in
+        exporting mode.  The association is referenced
+        by the ipfixTransportSessionSctpAssocId.
+        If any other protocol without the notion of
+        ports is used, the object MUST be set to zero."
+    ::= { ipfixTransportSessionEntry 8 }
+
+ipfixTransportSessionSctpAssocId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The association id used for the SCTP session between the
+        Exporter and the Collector of the IPFIX Transport Session.
+        It is equal to the sctpAssocId entry in the sctpAssocTable
+        defined in the SCTP MIB.  This object is only valid if
+        ipfixTransportSessionProtocol has the value 132 (SCTP).  In
+        all other cases, the value MUST be zero."
+    REFERENCE
+        "RFC 3873, Stream Control Transmission Protocol (SCTP)
+        Management Information Base (MIB)."
+    ::= { ipfixTransportSessionEntry 9 }
+
+ipfixTransportSessionDeviceMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    exporting(1),
+                    collecting(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The mode of operation of the device for the given Transport
+        Session.  This object can have the following values:
+
+        exporting(1)
+            This value MUST be used if the Transport Session is
+            used for exporting Records to other IPFIX Devices,
+            i.e., this device acts as Exporter.
+
+        collecting(2)
+            This value MUST be used if the Transport Session is
+            used for collecting Records from other IPFIX Devices,
+            i.e., this device acts as Collector."
+    ::= { ipfixTransportSessionEntry 10 }
+
+ipfixTransportSessionTemplateRefreshTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On Exporters, this object contains the time in seconds
+        after which IPFIX Templates are resent by the
+        Exporter.
+
+        On Collectors, this object contains the lifetime in seconds
+        after which a Template becomes invalid when it is not
+        received again within this lifetime.
+
+        This object is only valid if ipfixTransportSessionProtocol
+        has the value 17 (UDP).  In all other cases, the value MUST
+        be zero."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Sections 10.3.6 and 10.3.7."
+    ::= { ipfixTransportSessionEntry 11 }
+
+ipfixTransportSessionOptionsTemplateRefreshTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On Exporters, this object contains the time in seconds
+        after which IPFIX Options Templates are resent by the
+        Exporter.
+
+        On Collectors, this object contains the lifetime in seconds
+        after which an Options Template becomes invalid when it is
+        not received again within this lifetime.
+
+        This object is only valid if ipfixTransportSessionProtocol
+        has the value 17 (UDP).  In all other cases the value MUST
+        be zero."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Sections 10.3.6 and 10.3.7."
+    ::= { ipfixTransportSessionEntry 12 }
+
+ipfixTransportSessionTemplateRefreshPacket OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On Exporters, this object contains the number of exported
+        IPFIX Messages after which IPFIX Templates are resent
+        by the Exporter.
+
+        On Collectors, this object contains the lifetime in number
+        of exported IPFIX Messages after which a Template becomes
+        invalid when it is not received again within this lifetime.
+
+        This object is only valid if ipfixTransportSessionProtocol
+        has the value 17 (UDP).  In all other cases the value MUST
+        be zero."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Sections 10.3.6 and 10.3.7."
+    ::= { ipfixTransportSessionEntry 13 }
+
+ipfixTransportSessionOptionsTemplateRefreshPacket OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On Exporters, this object contains the number of exported
+        IPFIX Messages after which IPFIX Options Templates are
+        resent by the Exporter.
+
+        On Collectors, this object contains the lifetime in number
+        of exported IPFIX Messages after which an Options Template
+        becomes invalid when it is not received again within this
+        lifetime.
+
+        This object is only valid if ipfixTransportSessionProtocol
+        has the value 17 (UDP).  In all other cases the value MUST
+        be zero."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Sections 10.3.6 and 10.3.7."
+    ::= { ipfixTransportSessionEntry 14 }
+
+ipfixTransportSessionIpfixVersion OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On Exporters the object contains the version number of the
+        IPFIX protocol that the Exporter uses to export its data in
+        this Transport Session.
+
+        On Collectors the object contains the version number of the
+        IPFIX protocol it receives for this Transport Session.
+
+        If IPFIX Messages of different IPFIX protocol versions are
+        transmitted or received in this Transport Session, this
+        object contains the maximum version number."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.1."
+    ::= { ipfixTransportSessionEntry 15 }
+
+ipfixTransportSessionStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(0),
+                    inactive(1),
+                    active(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The status of a Transport Session.  This object can have the
+        following values:
+
+        unknown(0)
+            This value MUST be used if the status of the
+            Transport Session cannot be detected by the equipment.
+            This value should be avoided as far as possible.
+
+        inactive(1)
+            This value MUST be used for Transport Sessions that
+            are specified in the system but are not currently active.
+            The value can be used, e.g., for Transport Sessions that
+            are backup (secondary) sessions in a Transport Session
+            group.
+
+        active(2)
+            This value MUST be used for Transport Sessions that are
+            currently active and transmitting or receiving data."
+    ::= { ipfixTransportSessionEntry 16 }
+
+--------------------------------------------------------------------
+-- 1.1.2: Template Table
+--------------------------------------------------------------------
+ipfixTemplateTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixTemplateEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the Templates and Options Templates that
+        are transmitted by the Exporting Process or received by the
+        Collecting Process.
+
+        The table contains the Templates and Options Templates that
+        are received or used for exporting data for a given
+        Transport Session group and Observation Domain.
+
+        Withdrawn or invalidated (Options) Template MUST be removed
+        from this table."
+    ::= { ipfixMainObjects 2 }
+
+ipfixTemplateEntry OBJECT-TYPE
+    SYNTAX      IpfixTemplateEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixTemplateTable."
+    INDEX       {
+        ipfixTransportSessionIndex,
+        ipfixTemplateObservationDomainId,
+        ipfixTemplateId
+    }
+    ::= { ipfixTemplateTable 1 }
+
+IpfixTemplateEntry ::=
+    SEQUENCE {
+        ipfixTemplateObservationDomainId Unsigned32,
+        ipfixTemplateId                  Unsigned32,
+        ipfixTemplateSetId               Unsigned32,
+        ipfixTemplateAccessTime          DateAndTime
+    }
+
+ipfixTemplateObservationDomainId OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The Id of the Observation Domain for which this Template
+        is defined.  This value is used when sending IPFIX Messages.
+
+        The special value of 0 indicates that the Data Records
+        exported with this (Option Template) cannot be applied to a
+        single Observation Domain."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.1."
+    ::= { ipfixTemplateEntry 1 }
+
+ipfixTemplateId OBJECT-TYPE
+    SYNTAX      Unsigned32 (256..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This number indicates the Template Id in the IPFIX
+        Message.  Values from 0 to 255 are not allowed for Template
+        Ids."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.4.1."
+    ::= { ipfixTemplateEntry 2 }
+
+ipfixTemplateSetId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This number indicates the Set Id of the Template.  This
+        object allows to easily retrieve the Template type.
+
+        Currently, there are two values defined.  The value 2 is
+        used for Sets containing Template definitions.  The value 3
+        is used for Sets containing Options Template definitions."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.3.2."
+    ::= { ipfixTemplateEntry 3 }
+
+ipfixTemplateAccessTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the Transport Session is in exporting mode
+        (ipfixTransportSessionDeviceMode) the time when this
+        (Options) Template was last sent to the Collector(s).
+
+        In the specific case of UDP as transport protocol, this
+        time is used to know when a retransmission of the
+        (Options) Template is needed.
+
+        If it is in collecting mode, this object contains the
+        time when this (Options) Template was last received from
+        the Exporter.  In the specific case of UDP as transport
+        protocol, this time is used to know when this (Options)
+        Template times out and thus is no longer valid."
+    ::= { ipfixTemplateEntry 4 }
+
+--------------------------------------------------------------------
+-- 1.1.3: Exported Template Definition Table
+--------------------------------------------------------------------
+ipfixTemplateDefinitionTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixTemplateDefinitionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "On Exporters, this table lists the (Options) Template fields
+        of which a (Options) Template is defined.  It defines the
+        (Options) Template given in the ipfixTemplateId specified in
+        the ipfixTemplateTable.
+
+        On Collectors, this table lists the (Options) Template fields
+        of which a (Options) Template is defined.  It defines the
+        (Options) Template given in the ipfixTemplateId specified in
+        the ipfixTemplateTable."
+    ::= { ipfixMainObjects 3 }
+
+ipfixTemplateDefinitionEntry OBJECT-TYPE
+    SYNTAX      IpfixTemplateDefinitionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixTemplateDefinitionTable."
+    INDEX       {
+        ipfixTransportSessionIndex,
+        ipfixTemplateObservationDomainId,
+        ipfixTemplateId,
+        ipfixTemplateDefinitionIndex
+    }
+    ::= { ipfixTemplateDefinitionTable 1 }
+
+IpfixTemplateDefinitionEntry ::=
+    SEQUENCE {
+        ipfixTemplateDefinitionIndex            Unsigned32,
+        ipfixTemplateDefinitionIeId             Unsigned32,
+        ipfixTemplateDefinitionIeLength         Unsigned32,
+        ipfixTemplateDefinitionEnterpriseNumber Unsigned32,
+        ipfixTemplateDefinitionFlags            BITS
+    }
+
+ipfixTemplateDefinitionIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ipfixTemplateDefinitionIndex specifies the order in
+        which the Information Elements are used in the (Options)
+        Template Record.
+
+        Since a Template Record can contain a maximum of 65535
+        Information Elements, the index is limited to this value."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Sections 3.4.1 and 3.4.2."
+    ::= { ipfixTemplateDefinitionEntry 1 }
+
+ipfixTemplateDefinitionIeId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This indicates the Information Element Id at position
+        ipfixTemplateDefinitionIndex in the (Options) Template
+        ipfixTemplateId.  This implicitly specifies the data type
+        of the Information Element.  The elements are registered
+        at IANA.  A current list of assignments can be found at
+        <http://www.iana.org/assignments/ipfix>"
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.2.
+
+        RFC 5102, Information Model for IP Flow Information Export."
+    ::= { ipfixTemplateDefinitionEntry 2 }
+
+ipfixTemplateDefinitionIeLength OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This indicates the length of the Information Element Id at
+        position ipfixTemplateDefinitionIndex in the (Options)
+        Template ipfixTemplateId."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.2.
+
+        RFC 5102, Information Model for IP Flow Information Export."
+    ::= { ipfixTemplateDefinitionEntry 3 }
+
+ipfixTemplateDefinitionEnterpriseNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "IANA enterprise number of the authority defining the
+        Information Element identifier in this Template Record.
+        Enterprise numbers are assigned by IANA.  A current list of
+        all assignments is available from
+        <http://www.iana.org/assignments/enterprise-numbers/>.
+
+        This object must be zero(0) for all standard Information
+        Elements registered with IANA.  A current list of these
+        elements is available from
+        <http://www.iana.org/assignments/ipfix/ipfix.xhtml>."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Section 3.2.
+
+        RFC 5102, Information Model for IP Flow Information Export."
+    ::= { ipfixTemplateDefinitionEntry 4 }
+
+ipfixTemplateDefinitionFlags OBJECT-TYPE
+    SYNTAX      BITS {
+                    scope(0),
+                    flowKey(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This bitmask indicates special attributes for the
+        Information Element:
+
+        scope(0)
+            This Information Element is used for scope.
+
+        flowKey(1)
+            This Information Element is a Flow Key.
+
+        Thus, we get the following values for an Information Element:
+
+        If neither bit scope(0) nor bit flowKey(1) are set
+            The Information Element is neither used for scoping nor
+            as Flow Key.
+        If only bit scope(0) is set
+            The Information Element is used for scoping.
+        If only bit flowKey(1) is set
+            The Information Element is used as Flow Key.
+
+        Both bit scope(0) and flowKey(1) MUST NOT be set at the same
+        time.  This combination is not allowed."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information
+        Export (IPFIX) Protocol for the Exchange of IP Traffic Flow
+        Information, Sections 2 and 3.4.2.1.
+
+        RFC 5102, Information Model for IP Flow Information Export."
+    ::= { ipfixTemplateDefinitionEntry 5 }
+
+--------------------------------------------------------------------
+-- 1.1.4: Export Table
+--------------------------------------------------------------------
+ipfixExportTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixExportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists all exports of an IPFIX device.
+
+        On Exporters, this table contains all exports grouped by
+        Transport Session, Observation Domain Id, Template Id, and
+        Metering Process represented by the
+        ipfixMeteringProcessCacheId.  Thanks to the ipfixExportIndex,
+        the exports can group one or more Transport Sessions to
+        achieve a special functionality like failover management,
+        load-balancing, etc.  The entries with the same
+        ipfixExportIndex, ipfixObservationDomainId,
+        and ipfixMeteringProcessCacheId define a Transport
+        Session group.  If the Exporter does not use Transport
+        Session grouping, then each ipfixExportIndex contains a
+        single ipfixMeteringProcessCacheId and thus a singe
+        Transport Session, and this session MUST have the member
+        type primary(1).  Transport Sessions referenced in this
+        table MUST have the ipfixTransportSessionDeviceMode
+        exporting(1).
+
+        On Collectors, this table is not needed."
+    ::= { ipfixMainObjects 4 }
+
+ipfixExportEntry OBJECT-TYPE
+    SYNTAX      IpfixExportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixExportTable."
+    INDEX       {
+        ipfixExportIndex,
+        ipfixMeteringProcessCacheId,
+        ipfixTransportSessionIndex
+    }
+    ::= { ipfixExportTable 1 }
+
+IpfixExportEntry ::=
+    SEQUENCE {
+       ipfixExportIndex      Unsigned32,
+       ipfixExportMemberType INTEGER
+    }
+
+ipfixExportIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Locally arbitrary, but unique identifier of an entry in
+        the ipfixExportTable.  The value is expected
+        to remain constant from a re-initialization of the entity's
+        network management agent to the next re-initialization.
+
+        A common ipfixExportIndex between two entries from this
+        table expresses that there is a relationship between the
+        Transport Sessions in ipfixTransportSessionIndex.  The type
+        of relationship is expressed by the value of
+        ipfixExportMemberType."
+    ::= { ipfixExportEntry 1 }
+
+ipfixExportMemberType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(0),
+                    primary(1),
+                    secondary(2),
+                    parallel(3),
+                    loadBalancing(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of a member Transport Session in a Transport
+        Session group (identified by the value of ipfixExportIndex,
+        ipfixObservationDomainId, and ipfixMeteringProcessCacheId).
+        The following values are valid:
+
+        unknown(0)
+            This value MUST be used if the status of the group
+            membership cannot be detected by the equipment.  This
+            value should be avoided as far as possible.
+
+        primary(1)
+            This value is used for a group member that is used as
+            the primary target of an Exporter.  Other group members
+            (with the same ipfixExportIndex and
+            ipfixMeteringProcessCacheId) MUST NOT have the value
+            primary(1) but MUST have the value secondary(2).
+            This value MUST also be specified if the Exporter does
+            not support Transport Session grouping.  In this case,
+            the group contains only one Transport Session.
+
+        secondary(2)
+            This value is used for a group member that is used as a
+            secondary target of an Exporter.  The Exporter will use
+            one of the targets specified as secondary(2) within the
+            same Transport Session group when the primary target is
+            not reachable.
+
+        parallel(3)
+            This value is used for a group member that is used for
+            duplicate exporting, i.e., all group members identified
+            by the ipfixExportIndex are exporting the same Records
+            in parallel.  This implies that all group members MUST
+            have the same membertype parallel(3).
+
+        loadBalancing(4)
+            This value is used for a group member that is used
+            as one target for load-balancing.  This means that a
+            Record is sent to one of the group members in this
+            group identified by ipfixExportIndex.
+            This implies that all group members MUST have the same
+            membertype loadBalancing(4)."
+    ::= { ipfixExportEntry 2 }
+
+--------------------------------------------------------------------
+-- 1.1.5: Metering Process Table
+--------------------------------------------------------------------
+ipfixMeteringProcessTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixMeteringProcessEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists so-called caches used at the Metering
+        Process to store the metering data of Flows observed at
+        the Observation Points given in the
+        ipfixObservationPointGroupReference.  The table lists the
+        timeouts that specify when the cached metering data is
+        expired.
+
+        On Collectors, the table is not needed."
+    ::= { ipfixMainObjects 5 }
+
+ipfixMeteringProcessEntry OBJECT-TYPE
+    SYNTAX      IpfixMeteringProcessEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixMeteringProcessTable."
+    INDEX       { ipfixMeteringProcessCacheId }
+    ::= { ipfixMeteringProcessTable 1 }
+
+IpfixMeteringProcessEntry ::=
+    SEQUENCE {
+        ipfixMeteringProcessCacheId              Unsigned32,
+        ipfixMeteringProcessObservationPointGroupRef Unsigned32,
+        ipfixMeteringProcessCacheActiveTimeout   Unsigned32,
+        ipfixMeteringProcessCacheInactiveTimeout Unsigned32
+    }
+
+ipfixMeteringProcessCacheId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Locally arbitrary, but unique identifier of an entry in the
+        ipfixMeterinProcessTable.  The value is expected to remain
+        constant from a re-initialization of the entity's network
+        management agent to the next re-initialization."
+    ::= { ipfixMeteringProcessEntry 1 }
+
+ipfixMeteringProcessObservationPointGroupRef OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Observation Point Group Id that links this table entry
+        to the ipfixObservationPointTable.  The matching
+        ipfixObservationPointGroupId in that table gives the
+        Observation Points used in that cache.  If the Observation
+        Points are unknown, the
+        ipfixMeteringProcessObservationPointGroupRef MUST be zero."
+    ::= { ipfixMeteringProcessEntry 2 }
+
+ipfixMeteringProcessCacheActiveTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On the Exporter, this object contains the time after which a
+        Flow is expired (and a Data Record for the template is sent)
+        even though packets matching this Flow are still received by
+        the Metering Process.  If this value is 0, the Flow is not
+        prematurely expired."
+    REFERENCE
+        "RFC 5470, Architecture for IP Flow Information Export,
+        Section 5.1.1, item 3."
+    ::= { ipfixMeteringProcessEntry 3 }
+
+ipfixMeteringProcessCacheInactiveTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "On the Exporter. this object contains the time after which a
+        Flow is expired (and a Data Record for the template is sent)
+        when no packets matching this Flow are received by the
+        Metering Process for the given number of seconds.  If this
+        value is zero, the Flow is expired immediately, i.e., a Data
+        Record is sent for every packet received by the Metering
+        Process."
+    REFERENCE
+        "RFC 5470, Architecture for IP Flow Information Export,
+        Section 5.1.1, item 1"
+    ::= { ipfixMeteringProcessEntry 4 }
+
+--------------------------------------------------------------------
+-- 1.1.6: Observation Point Table
+--------------------------------------------------------------------
+ipfixObservationPointTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixObservationPointEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the Observation Points used within an
+        Exporter by the Metering Process. The index
+        ipfixObservationPointGroupId groups Observation Points
+        and is referenced in the Metering Process table.
+
+        On Collectors this table is not needed."
+    ::= { ipfixMainObjects 6 }
+
+ipfixObservationPointEntry OBJECT-TYPE
+    SYNTAX      IpfixObservationPointEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixObservationPointTable."
+    INDEX       {
+        ipfixObservationPointGroupId,
+        ipfixObservationPointIndex
+    }
+    ::= { ipfixObservationPointTable 1 }
+
+IpfixObservationPointEntry ::=
+    SEQUENCE {
+        ipfixObservationPointGroupId           Unsigned32,
+        ipfixObservationPointIndex             Unsigned32,
+        ipfixObservationPointObservationDomainId Unsigned32,
+        ipfixObservationPointPhysicalEntity    PhysicalIndexOrZero,
+        ipfixObservationPointPhysicalInterface InterfaceIndexOrZero,
+        ipfixObservationPointPhysicalEntityDirection INTEGER
+    }
+
+ipfixObservationPointGroupId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Locally arbitrary, but unique identifier of an entry in the
+        ipfixObservationPointTable.  The value is expected to remain
+        constant from a re-initialization of the entity's network
+        management agent to the next re-initialization.
+
+        This index represents a group of Observation Points.
+
+        The special value of 0 MUST NOT be used within this table
+        but is reserved for the usage in the
+        ipfixMeteringProcessTable.  An index of 0 for the
+        ipfixObservationPointGroupReference index in that table
+        indicates that an Observation Point is unknown or
+        unspecified for a Metering Process cache."
+    ::= { ipfixObservationPointEntry 1 }
+
+ipfixObservationPointIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Locally arbitrary, but unique identifier of an entry in the
+        ipfixObservationPointTable.  The value is expected to remain
+        constant from a re-initialization of the entity's network
+        management agent to the next re-initialization.
+
+        This index represents a single Observation Point in an
+        Observation Point group."
+    ::= { ipfixObservationPointEntry 2 }
+
+ipfixObservationPointObservationDomainId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Id of the Observation Domain in which this
+        Observation Point is included.
+
+        The special value of 0 indicates that the Observation
+        Points within this group cannot be applied to a single
+        Observation Domain."
+    REFERENCE
+        "RFC 5101, Specification of the IP Flow Information Export
+        (IPFIX) Protocol for the Exchange of IP
+        Traffic Flow Information, Section 3.1."
+    ::= { ipfixObservationPointEntry 3 }
+
+ipfixObservationPointPhysicalEntity OBJECT-TYPE
+    SYNTAX      PhysicalIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the index of a physical entity in
+        the ENTITY MIB.  This physical entity is the given
+        Observation Point.  If such a physical entity cannot be
+        specified or is not known, then the object is zero."
+    ::= { ipfixObservationPointEntry 4 }
+
+ipfixObservationPointPhysicalInterface OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the index of a physical interface in
+        the IF MIB.  This physical interface is the given
+        Observation Point.  If such a physical interface cannot be
+        specified or is not known, then the object is zero.
+
+        This object MAY be used stand alone or in addition to
+        ipfixObservationPointPhysicalEntity.  If
+        ipfixObservationPointPhysicalEntity is not zero, this object
+        MUST point to the same physical interface that is
+        referenced in ipfixObservationPointPhysicalEntity.
+        Otherwise, it may reference any interface in the IF MIB."
+    ::= { ipfixObservationPointEntry 5 }
+
+ipfixObservationPointPhysicalEntityDirection OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(0),
+                    ingress(1),
+                    egress(2),
+                    both(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The direction of the Flow that is monitored on the given
+        physical entity.  The following values are valid:
+
+        unknown(0)
+            This value MUST be used if a direction is not
+            known for the given physical entity.
+
+        ingress(1)
+            This value is used for monitoring incoming Flows on the
+            given physical entity.
+
+        egress(2)
+            This value is used for monitoring outgoing Flows on the
+            given physical entity.
+
+        both(3)
+            This value is used for monitoring incoming and outgoing
+            Flows on the given physical entity."
+    ::= { ipfixObservationPointEntry 6 }
+
+--------------------------------------------------------------------
+-- 1.1.7: Selection Process Table
+--------------------------------------------------------------------
+ipfixSelectionProcessTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixSelectionProcessEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains Selector Functions connected to a
+        Metering Process by the index ipfixMeteringProcessCacheId.
+        The Selector Functions are grouped into Selection Processes
+        by the ipfixSelectionProcessIndex.  The Selector Functions
+        are applied within the Selection Process to the packets
+        observed for the given Metering Process cache in increasing
+        order implied by the ipfixSelectionProcessSelectorIndex.
+        This means Selector Functions with lower
+        ipfixSelectionProcessSelectorIndex are applied first.  The
+        remaining packets are accounted for in Flow Records.
+
+        Since IPFIX does not define any Selector Function (except
+        selecting every packet), this is a placeholder for future
+        use and a guideline for implementing enterprise-specific
+        Selector Function objects.
+
+        The following object tree should visualize how the
+        Selector Function objects should be implemented:
+
+        ipfixSelectorFunctions
+        |
+        +- ipfixFuncSelectAll
+        |  |
+        |  +- ipfixFuncSelectAllAvail (is the function available?)
+        |
+        +- ipfixFuncF2
+        |  |
+        |  +- ipfixFuncF2Avail (is the function F2 available?)
+        |  |
+        |  +- ipfixFuncF2Parameters (a table with parameters)
+        ...
+        |
+        +- ipfixFunFn...
+
+        If a Selector Function takes parameters, the MIB should
+        contain a table with an entry for each set of parameters
+        used at the Exporter."
+    ::= { ipfixMainObjects 7 }
+
+ipfixSelectionProcessEntry OBJECT-TYPE
+    SYNTAX      IpfixSelectionProcessEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixSelectionProcessTable."
+    INDEX       {
+        ipfixMeteringProcessCacheId,
+        ipfixSelectionProcessIndex,
+        ipfixSelectionProcessSelectorIndex
+    }
+    ::= { ipfixSelectionProcessTable 1 }
+
+IpfixSelectionProcessEntry ::= SEQUENCE {
+        ipfixSelectionProcessIndex            Unsigned32,
+        ipfixSelectionProcessSelectorIndex    Unsigned32,
+        ipfixSelectionProcessSelectorFunction OBJECT IDENTIFIER
+    }
+
+ipfixSelectionProcessIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Locally arbitrary, but unique identifier of an entry in the
+        ipfixSelectionProcessTable.  The value is expected to remain
+        constant from a re-initialization of the entity's network
+        management agent to the next re-initialization."
+    ::= { ipfixSelectionProcessEntry 1 }
+
+ipfixSelectionProcessSelectorIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Index specifying the order in which the referenced
+        ipfixSelctionProcessSelectorFunctions are applied to the
+        observed packet stream within the given Selection Process
+        (identified by the ipfixSelectionProcessIndex).  The
+        Selector Functions are applied in increasing order, i.e.,
+        Selector Functions with lower index are applied first."
+    ::= { ipfixSelectionProcessEntry 2 }
+
+ipfixSelectionProcessSelectorFunction OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The pointer to the Selector Function used at position
+        ipfixSelectionProcessSelectorIndex in the list of Selector
+        Functions for the Metering Process cache specified by the
+        index ipfixMeteringProcessCacheId and for the given
+        Selection Process (identified by the
+        ipfixSelectionProcessIndex).
+
+        This usually points to an object in the IPFIX SELECTOR MIB.
+        If the Selector Function does not take parameters, then it
+        MUST point to the root of the function subtree.  If the
+        function takes parameters, then it MUST point to an entry
+        in the parameter table of the Selector Function."
+    ::= { ipfixSelectionProcessEntry 3 }
+
+--------------------------------------------------------------------
+-- 1.2.1: Transport Session Statistics Table
+--------------------------------------------------------------------
+ipfixTransportSessionStatsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixTransportSessionStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists Transport Sessions statistics between
+        Exporting Processes and Collecting Processes."
+    ::= { ipfixStatistics 1 }
+
+ipfixTransportSessionStatsEntry OBJECT-TYPE
+    SYNTAX      IpfixTransportSessionStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixTransportSessionStatsTable."
+    AUGMENTS    { ipfixTransportSessionEntry }
+    ::= { ipfixTransportSessionStatsTable 1 }
+
+IpfixTransportSessionStatsEntry ::=
+    SEQUENCE {
+        ipfixTransportSessionRate              Gauge32,
+        ipfixTransportSessionPackets           Counter64,
+        ipfixTransportSessionBytes             Counter64,
+        ipfixTransportSessionMessages          Counter64,
+        ipfixTransportSessionDiscardedMessages Counter64,
+        ipfixTransportSessionRecords           Counter64,
+        ipfixTransportSessionTemplates         Counter64,
+        ipfixTransportSessionOptionsTemplates  Counter64,
+        ipfixTransportSessionDiscontinuityTime TimeStamp
+    }
+
+ipfixTransportSessionRate OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "bytes/second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes per second received by the
+        Collector or transmitted by the Exporter.  A
+        value of zero (0) means that no packets were sent or
+        received, yet.  This object is updated every second."
+    ::= { ipfixTransportSessionStatsEntry 1 }
+
+ipfixTransportSessionPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "packets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets received by the Collector
+        or transmitted by the Exporter.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 2 }
+
+ipfixTransportSessionBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes received by the Collector
+        or transmitted by the Exporter.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 3 }
+
+ipfixTransportSessionMessages OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of IPFIX Messages received by the
+        Collector or transmitted by the Exporter.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 4 }
+
+ipfixTransportSessionDiscardedMessages OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of received IPFIX Message that are malformed,
+        cannot be decoded, are received in the wrong order, or are
+        missing according to the sequence number.
+
+        If used at the Exporter, the number of messages that could
+        not be sent due to, e.g., internal buffer overflows, network
+        congestion, or routing issues.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 5 }
+
+ipfixTransportSessionRecords OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Data Records received by the Collector or
+        transmitted by the Exporter.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 6 }
+
+ipfixTransportSessionTemplates OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Templates received or transmitted.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 7 }
+
+ipfixTransportSessionOptionsTemplates OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Options Templates received or transmitted.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTransportSessionDiscontinuityTime."
+    ::= { ipfixTransportSessionStatsEntry 8 }
+
+ipfixTransportSessionDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime at the most recent occasion at which
+        one or more of the Transport Session counters suffered a
+        discontinuity.
+        A value of zero indicates no such discontinuity has
+        occurred since the last re-initialization of the local
+        management subsystem."
+    ::= { ipfixTransportSessionStatsEntry 9 }
+
+--------------------------------------------------------------------
+-- 1.2.2: Template Statistics Table
+--------------------------------------------------------------------
+ipfixTemplateStatsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixTemplateStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists statistics objects per Template."
+    ::= { ipfixStatistics 2 }
+
+ipfixTemplateStatsEntry OBJECT-TYPE
+    SYNTAX      IpfixTemplateStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixTemplateStatsTable."
+    AUGMENTS    { ipfixTemplateEntry }
+    ::= { ipfixTemplateStatsTable 1 }
+
+IpfixTemplateStatsEntry ::=
+    SEQUENCE {
+        ipfixTemplateDataRecords       Counter64,
+        ipfixTemplateDiscontinuityTime TimeStamp
+    }
+
+ipfixTemplateDataRecords OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Data Records that are transmitted or received
+        per Template.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system, and at other
+        times as indicated by the value of
+        ipfixTemplateDiscontinuityTime."
+    ::= { ipfixTemplateStatsEntry 1 }
+
+ipfixTemplateDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime at the most recent occasion at which
+        the Template counter suffered a discontinuity.
+        A value of zero indicates no such discontinuity has
+        occurred since the last re-initialization of the local
+        management subsystem."
+    ::= { ipfixTemplateStatsEntry 2 }
+
+--------------------------------------------------------------------
+-- 1.2.3: Metering Process Statistics Table
+--------------------------------------------------------------------
+ipfixMeteringProcessStatsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixMeteringProcessStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists statistic objects that have data per
+        Metering Process cache.
+
+        On Collectors, this table is not needed."
+    ::= { ipfixStatistics 3 }
+
+ipfixMeteringProcessStatsEntry OBJECT-TYPE
+    SYNTAX      IpfixMeteringProcessStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixMeteringProcessStatsTable."
+    AUGMENTS    { ipfixMeteringProcessEntry }
+    ::= { ipfixMeteringProcessStatsTable 1 }
+
+IpfixMeteringProcessStatsEntry ::=
+    SEQUENCE {
+        ipfixMeteringProcessCacheActiveFlows          Gauge32,
+        ipfixMeteringProcessCacheUnusedCacheEntries   Gauge32,
+        ipfixMeteringProcessCacheDataRecords          Counter64,
+        ipfixMeteringProcessCacheDiscontinuityTime    TimeStamp
+    }
+
+ipfixMeteringProcessCacheActiveFlows OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Flows currently active at this cache."
+    ::= { ipfixMeteringProcessStatsEntry 1 }
+
+ipfixMeteringProcessCacheUnusedCacheEntries   OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of unused cache entries."
+    ::= { ipfixMeteringProcessStatsEntry 2 }
+
+ipfixMeteringProcessCacheDataRecords OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of Data Records generated.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixTemplateDiscontinuityTime."
+    ::= { ipfixMeteringProcessStatsEntry 3 }
+
+ipfixMeteringProcessCacheDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime at the most recent occasion at which
+        the Metering Process counter suffered a discontinuity.
+        A value of zero indicates no such discontinuity has
+        occurred since the last re-initialization of the local
+        management subsystem."
+    ::= { ipfixMeteringProcessStatsEntry 4 }
+
+--------------------------------------------------------------------
+-- 1.2.4: Selection Process Statistics Table
+--------------------------------------------------------------------
+ipfixSelectionProcessStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpfixSelectionProcessStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains statistics for the Selector Functions
+        connected to Metering Process by the index
+        ipfixMeteringProcessCacheId.
+
+        The indexes MUST match an entry in the
+        ipfixSelectionProcessTable."
+    ::= { ipfixStatistics 4 }
+
+ipfixSelectionProcessStatsEntry OBJECT-TYPE
+    SYNTAX      IpfixSelectionProcessStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipfixSelectionProcessStatsTable."
+    AUGMENTS    { ipfixSelectionProcessEntry }
+    ::= { ipfixSelectionProcessStatsTable 1 }
+
+IpfixSelectionProcessStatsEntry ::= SEQUENCE {
+        ipfixSelectionProcessStatsPacketsObserved   Counter64,
+        ipfixSelectionProcessStatsPacketsDropped    Counter64,
+        ipfixSelectionProcessStatsDiscontinuityTime TimeStamp
+    }
+
+ipfixSelectionProcessStatsPacketsObserved OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets observed at the entry point of the
+        function.  The entry point may be the Observation Point or
+        the exit point of another Selector Function.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixSelectionProcessStatsDiscontinuityTime."
+    ::= { ipfixSelectionProcessStatsEntry 1 }
+
+ipfixSelectionProcessStatsPacketsDropped OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets dropped while selecting packets.
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the management system and at other
+        times as indicated by the value of
+        ipfixSelectionProcessStatsDiscontinuityTime."
+    ::= { ipfixSelectionProcessStatsEntry 2 }
+
+ipfixSelectionProcessStatsDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime at the most recent occasion at which
+        one or more of the Selector counters suffered a
+        discontinuity.
+        A value of zero indicates no such discontinuity has
+        occurred since the last re-initialization of the local
+        management subsystem."
+    ::= { ipfixSelectionProcessStatsEntry 3 }
+
+--==================================================================
+-- 2: Conformance Information
+--==================================================================
+ipfixCompliances OBJECT IDENTIFIER ::= { ipfixConformance 1 }
+ipfixGroups      OBJECT IDENTIFIER ::= { ipfixConformance 2 }
+
+--------------------------------------------------------------------
+-- 2.1: Compliance Statements
+--------------------------------------------------------------------
+ipfixCollectorCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "An implementation that builds an IPFIX Collector
+        that complies to this module MUST implement the objects
+        defined in the mandatory group ipfixCommonGroup.
+
+        The implementation of all objects in the other groups is
+        optional and depends on the corresponding functionality
+        implemented in the equipment.
+
+        An implementation that is compliant to this MIB module
+        is limited to use only the values TCP (6), UDP (17), and
+        SCTP (132) in the ipfixTransportSessionProtocol object
+        because these are the only protocol currently specified
+        for usage within IPFIX (see RFC 5101)."
+    MODULE  -- this module
+    MANDATORY-GROUPS {
+        ipfixCommonGroup
+    }
+
+    GROUP ipfixCommonStatsGroup
+    DESCRIPTION
+        "These objects should be implemented if the statistics
+        function is implemented in the equipment."
+    ::= { ipfixCompliances 1 }
+
+ipfixExporterCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "An implementation that builds an IPFIX Exporter that
+        complies to this module MUST implement the objects defined
+        in the mandatory group ipfixCommonGroup.  The implementation
+        of all other objects depends on the implementation of the
+        corresponding functionality in the equipment."
+    MODULE  -- this module
+
+    MANDATORY-GROUPS {
+            ipfixCommonGroup,
+            ipfixExporterGroup
+    }
+
+    GROUP ipfixCommonStatsGroup
+    DESCRIPTION
+        "These objects should be implemented if the statistics
+        function is implemented in the equipment."
+
+    GROUP ipfixExporterStatsGroup
+    DESCRIPTION
+        "These objects MUST be implemented if statistical functions
+        are implemented on the equipment."
+    ::= { ipfixCompliances 2 }
+
+--------------------------------------------------------------------
+-- 2.2: MIB Grouping
+--------------------------------------------------------------------
+ipfixCommonGroup OBJECT-GROUP
+    OBJECTS {
+        ipfixTransportSessionProtocol,
+        ipfixTransportSessionSourceAddressType,
+        ipfixTransportSessionSourceAddress,
+        ipfixTransportSessionDestinationAddressType,
+        ipfixTransportSessionDestinationAddress,
+        ipfixTransportSessionSourcePort,
+        ipfixTransportSessionDestinationPort,
+        ipfixTransportSessionSctpAssocId,
+        ipfixTransportSessionDeviceMode,
+        ipfixTransportSessionTemplateRefreshTimeout,
+        ipfixTransportSessionOptionsTemplateRefreshTimeout,
+        ipfixTransportSessionTemplateRefreshPacket,
+        ipfixTransportSessionOptionsTemplateRefreshPacket,
+        ipfixTransportSessionIpfixVersion,
+        ipfixTransportSessionStatus,
+        ipfixTemplateSetId,
+        ipfixTemplateAccessTime,
+        ipfixTemplateDefinitionIeId,
+        ipfixTemplateDefinitionIeLength,
+        ipfixTemplateDefinitionEnterpriseNumber,
+        ipfixTemplateDefinitionFlags
+    }
+    STATUS      current
+    DESCRIPTION
+        "The main IPFIX objects."
+    ::= { ipfixGroups 1 }
+
+ipfixCommonStatsGroup OBJECT-GROUP
+    OBJECTS {
+        ipfixTransportSessionRate,
+        ipfixTransportSessionPackets,
+        ipfixTransportSessionBytes,
+        ipfixTransportSessionMessages,
+        ipfixTransportSessionDiscardedMessages,
+        ipfixTransportSessionRecords,
+        ipfixTransportSessionTemplates,
+        ipfixTransportSessionOptionsTemplates,
+        ipfixTransportSessionDiscontinuityTime,
+        ipfixTemplateDataRecords,
+        ipfixTemplateDiscontinuityTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "Common statistical objects."
+    ::= { ipfixGroups 2 }
+
+ipfixExporterGroup OBJECT-GROUP
+    OBJECTS {
+        ipfixExportMemberType,
+        ipfixMeteringProcessObservationPointGroupRef,
+        ipfixMeteringProcessCacheActiveTimeout,
+        ipfixMeteringProcessCacheInactiveTimeout,
+        ipfixObservationPointObservationDomainId,
+        ipfixObservationPointPhysicalEntity,
+        ipfixObservationPointPhysicalInterface,
+        ipfixObservationPointPhysicalEntityDirection,
+        ipfixSelectionProcessSelectorFunction
+    }
+    STATUS      current
+    DESCRIPTION
+        "The main objects for Exporters."
+    ::= { ipfixGroups 3 }
+
+ipfixExporterStatsGroup OBJECT-GROUP
+    OBJECTS {
+        ipfixMeteringProcessCacheActiveFlows,
+        ipfixMeteringProcessCacheUnusedCacheEntries,
+        ipfixMeteringProcessCacheDataRecords,
+        ipfixMeteringProcessCacheDiscontinuityTime,
+        ipfixSelectionProcessStatsPacketsObserved,
+        ipfixSelectionProcessStatsPacketsDropped,
+        ipfixSelectionProcessStatsDiscontinuityTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "The statistical objects for Exporters."
+    ::= { ipfixGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/IPFIX-SELECTOR-MIB.mib b/snmp_builder/mibs/IPFIX-SELECTOR-MIB.mib
new file mode 100644
index 0000000..10b77c0
--- /dev/null
+++ b/snmp_builder/mibs/IPFIX-SELECTOR-MIB.mib
@@ -0,0 +1,167 @@
+IPFIX-SELECTOR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2
+        FROM SNMPv2-SMI                                -- RFC2578
+    TruthValue
+        FROM SNMPv2-TC                                 -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;                              -- RFC2580
+
+ipfixSelectorMIB MODULE-IDENTITY
+    LAST-UPDATED "201004190000Z"         --  19 April 2010
+    ORGANIZATION "IETF IPFIX Working Group"
+    CONTACT-INFO
+        "WG charter:
+          http://www.ietf.org/html.charters/ipfix-charter.html
+
+        Mailing Lists:
+          General Discussion: ipfix&ietf.org
+          To Subscribe: http://www1.ietf.org/mailman/listinfo/ipfix
+          Archive:
+      http://www1.ietf.org/mail-archive/web/ipfix/current/index.html
+
+        Editor:
+          Thomas Dietz
+          NEC Europe Ltd.
+          NEC Laboratories Europe
+          Network Research Division
+          Kurfuersten-Anlage 36
+          69115 Heidelberg
+          Germany
+          Phone: +49 6221 4342-128
+          Email: Thomas.Dietz&nw.neclab.eu
+
+          Atsushi Kobayashi
+          NTT Information Sharing Platform Laboratories
+          3-9-11 Midori-cho
+          Musashino-shi
+          180-8585
+          Japan
+          Phone: +81-422-59-3978
+          Email: akoba&nttv6.net
+
+          Benoit Claise
+          Cisco Systems, Inc.
+          De Kleetlaan 6a b1
+          Degem 1831
+          Belgium
+          Phone:  +32 2 704 5622
+          Email: bclaise&cisco.com
+
+          Gerhard Muenz
+          Technische Universitaet Muenchen
+          Department of Informatics
+          Chair for Network Architectures and Services (I8)
+          Boltzmannstr. 3
+          85748 Garching
+          Germany
+          Phone: +49 89 289-18008
+          Email: muenz&net.in.tum.de
+          URI:   http://www.net.in.tum.de/~muenz"
+    DESCRIPTION
+        "The IPFIX SELECTOR MIB module defines the standard
+        filtering and sampling functions that can be referenced in
+        the ipfixSelectorTable of the IPFIX MIB. The subtree
+        ipfixSelectorFunctions is a placeholder where all standard
+        filtering and sampling functions should be located.
+
+        The IPFIX SELECTOR MIB module is maintained by IANA and can
+        be extended through Expert Review [RFC5226], i.e. review by
+        one of a group of experts designated by an IETF Area
+        Director. The group of experts MUST check the requested MIB
+        objects for completeness and accuracy of the description.
+        Requests for MIB objects that duplicate the functionality of
+        existing objects SHOULD be declined. The smallest available
+        OID SHOULD be assigned to a new MIB objects. The
+        specification of new MIB objects SHOULD follow the structure
+        specified in [RFC5815] and MUST be published using a
+        well-established and persistent publication medium. The
+        experts will initially be drawn from the Working Group
+        Chairs and document editors of the IPFIX and PSAMP Working
+        Groups.
+
+        Copyright (c) 2009 IETF Trust and the persons identified as
+        the document authors.  All rights reserved. This version
+        of this MIB module is part of [RFC5815]; see the RFC itself
+        for full legal notices."
+
+--  Revision history
+
+    REVISION     "200906020900Z"         -- 02 June 2009
+    DESCRIPTION
+        "Initial version, published as [RFC5815]."
+    ::= { mib-2 194 }
+
+--******************************************************************
+-- Top Level Structure of the MIB
+--******************************************************************
+
+ipfixSelectorObjects     OBJECT IDENTIFIER
+    ::= { ipfixSelectorMIB 1 }
+ipfixSelectorConformance OBJECT IDENTIFIER
+    ::= { ipfixSelectorMIB 2 }
+
+--==================================================================
+-- 1: Objects used by all IPFIX implementations
+--==================================================================
+--------------------------------------------------------------------
+-- 1.1: Packet Selector Functions for IPFIX
+--------------------------------------------------------------------
+ipfixSelectorFunctions OBJECT IDENTIFIER
+    ::= { ipfixSelectorObjects 1 }
+
+--------------------------------------------------------------------
+-- 1.1.1: Function 1: Selecting All Packets
+--------------------------------------------------------------------
+ipfixFuncSelectAll OBJECT IDENTIFIER
+    ::= { ipfixSelectorFunctions 1 }
+
+ipfixFuncSelectAllAvail OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the availability of the trivial
+        function of selecting all packets. This function is always
+        available."
+    ::= { ipfixFuncSelectAll 1 }
+
+--==================================================================
+-- 2: Conformance Information
+--==================================================================
+ipfixSelectorCompliances OBJECT IDENTIFIER
+    ::= { ipfixSelectorConformance 1 }
+ipfixSelectorGroups      OBJECT IDENTIFIER
+    ::= { ipfixSelectorConformance 2 }
+
+--------------------------------------------------------------------
+-- 2.1: Compliance Statements
+--------------------------------------------------------------------
+ipfixSelectorBasicCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "An implementation that builds an IPFIX Exporter that
+        complies to this module MUST implement the objects defined
+        in the mandatory group ipfixBasicGroup. The implementation
+        of all other objects depends on the implementation of the
+        corresponding functionality in the equipment."
+    MODULE  -- this module
+    MANDATORY-GROUPS {
+            ipfixSelectorBasicGroup
+    }
+    ::= { ipfixSelectorCompliances 1 }
+
+--------------------------------------------------------------------
+-- 2.2: MIB Grouping
+--------------------------------------------------------------------
+ipfixSelectorBasicGroup OBJECT-GROUP
+    OBJECTS {
+        ipfixFuncSelectAllAvail
+    }
+    STATUS      current
+    DESCRIPTION
+        "The main IPFIX objects."
+    ::= { ipfixSelectorGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/IPMCAST-MIB.mib b/snmp_builder/mibs/IPMCAST-MIB.mib
new file mode 100644
index 0000000..b216e26
--- /dev/null
+++ b/snmp_builder/mibs/IPMCAST-MIB.mib
@@ -0,0 +1,2391 @@
+IPMCAST-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    mib-2, Unsigned32, Counter64,
+    Gauge32, TimeTicks              FROM SNMPv2-SMI         -- [RFC2578]
+    RowStatus, TruthValue,
+    StorageType, TimeStamp          FROM SNMPv2-TC          -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF        -- [RFC2580]
+    CounterBasedGauge64             FROM HCNUM-TC           -- [RFC2856]
+    InterfaceIndexOrZero,
+    InterfaceIndex                  FROM IF-MIB             -- [RFC2863]
+    IANAipRouteProtocol,
+    IANAipMRouteProtocol            FROM IANA-RTPROTO-MIB
+    SnmpAdminString                 FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
+    InetAddress, InetAddressType,
+    InetAddressPrefixLength,
+    InetZoneIndex, InetVersion      FROM INET-ADDRESS-MIB   -- [RFC4001]
+    LangTag                         FROM LANGTAG-TC-MIB;    -- [RFC5131]
+
+ipMcastMIB MODULE-IDENTITY
+    LAST-UPDATED "200711090000Z" -- 9 November 2007
+    ORGANIZATION "IETF MBONE Deployment (MBONED) Working Group"
+    CONTACT-INFO "David McWalter
+                  Data Connection Limited
+
+                  100 Church Street
+                  Enfield, EN2 6BQ
+                  UK
+
+                  Phone: +44 208 366 1177
+                  EMail: dmcw@dataconnection.com
+
+                  Dave Thaler
+                  Microsoft Corporation
+                  One Microsoft Way
+                  Redmond, WA 98052-6399
+                  US
+
+                  Phone: +1 425 703 8835
+                  EMail: dthaler@dthaler.microsoft.com
+
+                  Andrew Kessler
+                  Cisco Systems
+                  425 E. Tasman Drive
+                  San Jose, CA 95134
+                  US
+
+                  Phone: +1 408 526 5139
+                  EMail: kessler@cisco.com"
+    DESCRIPTION
+            "The MIB module for management of IP Multicast, including
+            multicast routing, data forwarding, and data reception.
+
+            Copyright (C) The IETF Trust (2007).  This version of this
+            MIB module is part of RFC 5132; see the RFC itself for full
+            legal notices."
+    REVISION     "200711090000Z" -- 9 November 2007
+    DESCRIPTION  "Initial version, published as RFC 5132.
+
+                 This MIB module obsoletes IPMROUTE-STD-MIB defined by
+                 [RFC2932].  Changes include the following:
+
+                 o  This MIB module includes support for IPv6 addressing
+                    and the IPv6 scoped address architecture.  [RFC2932]
+                    supported only IPv4.
+
+                 o  This MIB module allows several multicast protocols
+                    to perform routing on a single interface, where
+                    [RFC2932] assumed each interface supported at most
+                    one multicast routing protocol.  Multicast routing
+                    protocols are now per-route, see
+                    ipMcastRouteProtocol.
+
+                 o  This MIB module includes objects that are not
+                    specific to multicast routing.  It allows management
+                    of multicast function on systems that do not perform
+                    routing, whereas [RFC2932] was restricted to
+                    multicast routing.
+
+                 o  This MIB module includes a table of Source-Specific
+                    Multicast (SSM) address ranges to which SSM
+                    semantics [RFC3569] should be applied.
+
+                 o  This MIB module includes a table of local
+                    applications that are receiving multicast data.
+
+                 o  This MIB module includes a table of multicast scope
+                    zones."
+    ::= { mib-2 168 }
+
+--
+-- Top-level structure of the MIB
+--
+
+ipMcast      OBJECT IDENTIFIER ::= { ipMcastMIB 1 }
+
+ipMcastEnabled OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The enabled status of IP Multicast function on this
+            system.
+
+            The storage type of this object is determined by
+            ipMcastDeviceConfigStorageType."
+    ::= { ipMcast 1 }
+
+ipMcastRouteEntryCount OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of rows in the ipMcastRouteTable.  This can be
+            used to check for multicast routing activity, and to monitor
+            the multicast routing table size."
+    ::= { ipMcast 2 }
+
+ipMcastDeviceConfigStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The storage type used for the global IP multicast
+            configuration of this device, comprised of the objects
+            listed below.  If this storage type takes the value
+            'permanent', write-access to the listed objects need not be
+            allowed.
+
+            The objects described by this storage type are:
+            ipMcastEnabled."
+       DEFVAL { nonVolatile }
+    ::= { ipMcast 11 }
+
+--
+--  The Multicast Interface Table
+--
+
+ipMcastInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table used to manage the multicast
+            protocol active on an interface."
+    ::= { ipMcast 3 }
+
+ipMcastInterfaceEntry OBJECT-TYPE
+    SYNTAX     IpMcastInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the multicast protocol
+            information for a particular interface.
+
+            Per-interface multicast forwarding statistics are also
+            available in ipIfStatsTable."
+    REFERENCE "RFC 4293 ipIfStatsTable"
+    INDEX      { ipMcastInterfaceIPVersion,
+                 ipMcastInterfaceIfIndex }
+    ::= { ipMcastInterfaceTable 1 }
+
+IpMcastInterfaceEntry ::= SEQUENCE {
+    ipMcastInterfaceIPVersion         InetVersion,
+    ipMcastInterfaceIfIndex           InterfaceIndex,
+    ipMcastInterfaceTtl               Unsigned32,
+    ipMcastInterfaceRateLimit         Unsigned32,
+    ipMcastInterfaceStorageType       StorageType
+}
+
+ipMcastInterfaceIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of this row."
+    ::= { ipMcastInterfaceEntry 1 }
+
+ipMcastInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipMcastInterfaceEntry 2 }
+
+ipMcastInterfaceTtl OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..256)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The datagram Time to Live (TTL) threshold for the
+            interface.  Any IP multicast datagrams with a TTL (IPv4) or
+            Hop Limit (IPv6) less than this threshold will not be
+            forwarded out the interface.  The default value of 0 means
+            all multicast packets are forwarded out the interface.  A
+            value of 256 means that no multicast packets are forwarded
+            out the interface."
+    DEFVAL     { 0 }
+    ::= { ipMcastInterfaceEntry 3 }
+
+ipMcastInterfaceRateLimit OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The rate-limit, in kilobits per second, of forwarded
+            multicast traffic on the interface.  A rate-limit of 0
+            indicates that no rate limiting is done."
+    DEFVAL     { 0 }
+    ::= { ipMcastInterfaceEntry 4 }
+
+ipMcastInterfaceStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The storage type for this row.  Rows having the value
+            'permanent' need not allow write-access to any columnar
+            objects in the row."
+       DEFVAL { nonVolatile }
+    ::= { ipMcastInterfaceEntry 5 }
+
+--
+-- The SSM Range Table
+--
+
+ipMcastSsmRangeTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastSsmRangeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table is used to create and manage the range(s) of
+            group addresses to which SSM semantics should be applied."
+    REFERENCE "RFC 3569"
+    ::= { ipMcast 4 }
+
+ipMcastSsmRangeEntry OBJECT-TYPE
+    SYNTAX     IpMcastSsmRangeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing a range of group
+            addresses to which SSM semantics should be applied.
+
+            Object Identifiers (OIDs) are limited to 128
+            sub-identifiers, but this limit is not enforced by the
+            syntax of this entry.  In practice, this does not present
+            a problem, because IP address types allowed by conformance
+            statements do not exceed this limit."
+    REFERENCE "RFC 3569"
+    INDEX      { ipMcastSsmRangeAddressType,
+                 ipMcastSsmRangeAddress,
+                 ipMcastSsmRangePrefixLength }
+    ::= { ipMcastSsmRangeTable 1 }
+
+IpMcastSsmRangeEntry ::= SEQUENCE {
+    ipMcastSsmRangeAddressType   InetAddressType,
+    ipMcastSsmRangeAddress       InetAddress,
+    ipMcastSsmRangePrefixLength  InetAddressPrefixLength,
+    ipMcastSsmRangeRowStatus     RowStatus,
+    ipMcastSsmRangeStorageType   StorageType
+}
+
+ipMcastSsmRangeAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the multicast group prefix."
+    ::= { ipMcastSsmRangeEntry 1 }
+
+ipMcastSsmRangeAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address which, when combined with
+            ipMcastSsmRangePrefixLength, gives the group prefix for this
+            SSM range.  The InetAddressType is given by
+            ipMcastSsmRangeAddressType.
+
+            This address object is only significant up to
+            ipMcastSsmRangePrefixLength bits.  The remaining address
+            bits are set to zero.  This is especially important for this
+            index field, which is part of the index of this entry.  Any
+            non-zero bits would signify an entirely different entry.
+
+            For IPv6 SSM address ranges, only ranges prefixed by
+            FF3x::/16 are permitted, where 'x' is a valid IPv6 RFC 4291
+            multicast address scope.  The syntax of the address range is
+            given by RFC 3306, Sections 4 and 7.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            SSM range entry applies only within the given zone.  Zone
+            index zero is not valid in this table.
+
+            If non-global scope SSM range entries are present, then
+            consistent ipMcastBoundaryTable entries are required on
+            routers at the zone boundary."
+    REFERENCE "RFC 2365, RFC 4291 Section 2.7, RFC 3306 Sections 4, 6,
+            and 7"
+    ::= { ipMcastSsmRangeEntry 2 }
+
+ipMcastSsmRangePrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+
+            ipMcastSsmRangeAddress, gives the group prefix for this SSM
+            range.
+
+            The InetAddressType is given by ipMcastSsmRangeAddressType.
+            For values 'ipv4' and 'ipv4z', this object must be in the
+            range 4..32.  For values 'ipv6' and 'ipv6z', this object
+            must be in the range 8..128."
+    REFERENCE "RFC 2365, RFC 4291 Section 2.7, RFC 3306 Sections 4, 6,
+            and 7"
+    ::= { ipMcastSsmRangeEntry 3 }
+
+ipMcastSsmRangeRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which rows in this table can
+            be created and destroyed.
+
+            This status object can be set to active(1) without setting
+            any other columnar objects in this entry.
+
+            All writeable objects in this entry can be modified when the
+            status of this entry is active(1)."
+    ::= { ipMcastSsmRangeEntry 4 }
+
+ipMcastSsmRangeStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The storage type for this row.  Rows having the value
+           'permanent' need not allow write-access to any columnar
+           objects in the row."
+       DEFVAL { nonVolatile }
+    ::= { ipMcastSsmRangeEntry 5 }
+
+--
+--  The IP Multicast Routing Table
+--
+
+ipMcastRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing multicast routing
+            information for IP datagrams sent by particular sources
+
+            to the IP multicast groups known to this router."
+    ::= { ipMcast 5 }
+
+ipMcastRouteEntry OBJECT-TYPE
+    SYNTAX     IpMcastRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the multicast routing
+            information for IP datagrams from a particular source and
+            addressed to a particular IP multicast group address.
+
+            OIDs are limited to 128 sub-identifiers, but this limit
+            is not enforced by the syntax of this entry.  In practice,
+            this does not present a problem, because IP address types
+            allowed by conformance statements do not exceed this limit."
+    INDEX      { ipMcastRouteGroupAddressType,
+                 ipMcastRouteGroup,
+                 ipMcastRouteGroupPrefixLength,
+                 ipMcastRouteSourceAddressType,
+                 ipMcastRouteSource,
+                 ipMcastRouteSourcePrefixLength }
+    ::= { ipMcastRouteTable 1 }
+
+IpMcastRouteEntry ::= SEQUENCE {
+    ipMcastRouteGroupAddressType      InetAddressType,
+    ipMcastRouteGroup                 InetAddress,
+    ipMcastRouteGroupPrefixLength     InetAddressPrefixLength,
+    ipMcastRouteSourceAddressType     InetAddressType,
+    ipMcastRouteSource                InetAddress,
+    ipMcastRouteSourcePrefixLength    InetAddressPrefixLength,
+    ipMcastRouteUpstreamNeighborType  InetAddressType,
+    ipMcastRouteUpstreamNeighbor      InetAddress,
+    ipMcastRouteInIfIndex             InterfaceIndexOrZero,
+    ipMcastRouteTimeStamp             TimeStamp,
+    ipMcastRouteExpiryTime            TimeTicks,
+    ipMcastRouteProtocol              IANAipMRouteProtocol,
+    ipMcastRouteRtProtocol            IANAipRouteProtocol,
+    ipMcastRouteRtAddressType         InetAddressType,
+    ipMcastRouteRtAddress             InetAddress,
+    ipMcastRouteRtPrefixLength        InetAddressPrefixLength,
+    ipMcastRouteRtType                INTEGER,
+    ipMcastRouteOctets                Counter64,
+    ipMcastRoutePkts                  Counter64,
+    ipMcastRouteTtlDropOctets         Counter64,
+    ipMcastRouteTtlDropPackets        Counter64,
+    ipMcastRouteDifferentInIfOctets   Counter64,
+    ipMcastRouteDifferentInIfPackets  Counter64,
+    ipMcastRouteBps                   CounterBasedGauge64
+}
+
+ipMcastRouteGroupAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastRouteGroup.  Legal values correspond to
+            the subset of address families for which multicast
+            forwarding is supported."
+    ::= { ipMcastRouteEntry 1 }
+
+ipMcastRouteGroup OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address which, when combined with
+            the corresponding value specified in
+            ipMcastRouteGroupPrefixLength, identifies the groups for
+            which this entry contains multicast routing information.
+
+            This address object is only significant up to
+            ipMcastRouteGroupPrefixLength bits.  The remaining address
+            bits are set to zero.  This is especially important for this
+            index field, which is part of the index of this entry.  Any
+            non-zero bits would signify an entirely different entry.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            forwarding state applies only within the given zone.  Zone
+            index zero is not valid in this table."
+    ::= { ipMcastRouteEntry 2 }
+
+ipMcastRouteGroupPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+            the corresponding value of ipMcastRouteGroup, identifies the
+            groups for which this entry contains multicast routing
+            information.
+
+            The InetAddressType is given by
+
+            ipMcastRouteGroupAddressType.  For values 'ipv4' and
+            'ipv4z', this object must be in the range 4..32.  For values
+            'ipv6' and 'ipv6z', this object must be in the range
+            8..128."
+    ::= { ipMcastRouteEntry 3 }
+
+ipMcastRouteSourceAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastRouteSource.
+
+            A value of unknown(0) indicates a non-source-specific entry,
+            corresponding to all sources in the group.  Otherwise, the
+            value MUST be the same as the value of
+            ipMcastRouteGroupType."
+    ::= { ipMcastRouteEntry 4 }
+
+ipMcastRouteSource OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which, when combined with the
+            corresponding value of ipMcastRouteSourcePrefixLength,
+            identifies the sources for which this entry contains
+            multicast routing information.
+
+            This address object is only significant up to
+            ipMcastRouteSourcePrefixLength bits.  The remaining address
+            bits are set to zero.  This is especially important for this
+            index field, which is part of the index of this entry.  Any
+            non-zero bits would signify an entirely different entry.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            source address applies only within the given zone.  Zone
+            index zero is not valid in this table."
+    ::= { ipMcastRouteEntry 5 }
+
+ipMcastRouteSourcePrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+            the corresponding value of ipMcastRouteSource, identifies
+            the sources for which this entry contains multicast routing
+            information.
+
+            The InetAddressType is given by
+            ipMcastRouteSourceAddressType.  For the value 'unknown',
+            this object must be zero.  For values 'ipv4' and 'ipv4z',
+            this object must be in the range 4..32.  For values 'ipv6'
+            and 'ipv6z', this object must be in the range 8..128."
+    ::= { ipMcastRouteEntry 6 }
+
+ipMcastRouteUpstreamNeighborType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastRouteUpstreamNeighbor.
+
+            An address type of unknown(0) indicates that the upstream
+            neighbor is unknown, for example in BIDIR-PIM."
+    REFERENCE "RFC 5015"
+    ::= { ipMcastRouteEntry 7 }
+
+ipMcastRouteUpstreamNeighbor OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the upstream neighbor (for example, RPF
+            neighbor) from which IP datagrams from these sources to
+            this multicast address are received."
+    ::= { ipMcastRouteEntry 8 }
+
+ipMcastRouteInIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface on which IP
+            datagrams sent by these sources to this multicast address
+            are received.  A value of 0 indicates that datagrams are not
+            subject to an incoming interface check, but may be accepted
+            on multiple interfaces (for example, in BIDIR-PIM)."
+    REFERENCE "RFC 5015"
+    ::= { ipMcastRouteEntry 9 }
+
+ipMcastRouteTimeStamp OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at which the multicast routing
+            information represented by this entry was learned by the
+            router.
+
+            If this information was present at the most recent re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipMcastRouteEntry 10 }
+
+ipMcastRouteExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  The value 0 indicates that the entry is not
+            subject to aging.  If ipMcastRouteNextHopState is pruned(1),
+            this object represents the remaining time until the prune
+            expires.  If this timer expires, state reverts to
+            forwarding(2).  Otherwise, this object represents the time
+            until this entry is removed from the table."
+    ::= { ipMcastRouteEntry 11 }
+
+ipMcastRouteProtocol OBJECT-TYPE
+    SYNTAX     IANAipMRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The multicast routing protocol via which this multicast
+            forwarding entry was learned."
+    ::= { ipMcastRouteEntry 12 }
+
+ipMcastRouteRtProtocol OBJECT-TYPE
+    SYNTAX     IANAipRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which the route used to find the
+            upstream or parent interface for this multicast forwarding
+            entry was learned."
+    ::= { ipMcastRouteEntry 13 }
+
+ipMcastRouteRtAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastRouteRtAddress."
+    ::= { ipMcastRouteEntry 14 }
+
+ipMcastRouteRtAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address portion of the route used to find the upstream
+            or parent interface for this multicast forwarding entry.
+
+            This address object is only significant up to
+            ipMcastRouteRtPrefixLength bits.  The remaining address bits
+            are set to zero.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            forwarding state applies only within the given zone.  Zone
+            index zero is not valid in this table."
+    ::= { ipMcastRouteEntry 15 }
+
+ipMcastRouteRtPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask associated with the route
+            used to find the upstream or parent interface for this
+            multicast forwarding entry.
+
+            The InetAddressType is given by ipMcastRouteRtAddressType.
+            For values 'ipv4' and 'ipv4z', this object must be in the
+            range 4..32.  For values 'ipv6' and 'ipv6z', this object
+            must be in the range 8..128."
+    ::= { ipMcastRouteEntry 16 }
+
+ipMcastRouteRtType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                unicast (1),  -- Unicast route used in multicast RIB
+                multicast (2) -- Multicast route
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The reason the given route was placed in the (logical)
+            multicast Routing Information Base (RIB).  A value of
+            unicast means that the route would normally be placed only
+            in the unicast RIB, but was placed in the multicast RIB
+            due (instead or in addition) to local configuration, such as
+            when running PIM over RIP.  A value of multicast means that
+            the route was explicitly added to the multicast RIB by the
+            routing protocol, such as the Distance Vector Multicast
+            Routing Protocol (DVMRP) or Multiprotocol BGP."
+    ::= { ipMcastRouteEntry 17 }
+
+ipMcastRouteOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams that were
+            received from these sources and addressed to this multicast
+            group address, and which were forwarded by this router.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteTimeStamp."
+    ::= { ipMcastRouteEntry 18 }
+
+ipMcastRoutePkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets routed using this multicast route
+            entry.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteTimeStamp."
+    ::= { ipMcastRouteEntry 19 }
+
+ipMcastRouteTtlDropOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams that this
+            router has received from these sources and addressed to this
+            multicast group address, which were dropped because the TTL
+            (IPv4) or Hop Limit (IPv6) was decremented to zero, or to a
+            value less than ipMcastInterfaceTtl for all next hops.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteTimeStamp."
+    ::= { ipMcastRouteEntry 20 }
+
+ipMcastRouteTtlDropPackets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets that this router has received from
+            these sources and addressed to this multicast group address,
+            which were dropped because the TTL (IPv4) or Hop Limit
+            (IPv6) was decremented to zero, or to a value less than
+            ipMcastInterfaceTtl for all next hops.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteTimeStamp."
+    ::= { ipMcastRouteEntry 21 }
+
+ipMcastRouteDifferentInIfOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams that this
+            router has received from these sources and addressed to this
+            multicast group address, which were dropped because they
+            were received on an unexpected interface.
+
+            For RPF checking protocols (such as PIM-SM), these packets
+            arrived on interfaces other than ipMcastRouteInIfIndex, and
+            were dropped because of this failed RPF check.  (RPF paths
+            are 'Reverse Path Forwarding' paths; the unicast routes to
+            the expected origin of multicast data flows).
+
+            Other protocols may drop packets on an incoming interface
+            check for different reasons (for example, BIDIR-PIM performs
+            a DF check on receipt of packets).  All packets dropped as a
+            result of an incoming interface check are counted here.
+
+            If this counter increases rapidly, this indicates a problem.
+            A significant quantity of multicast data is arriving at this
+            router on unexpected interfaces, and is not being forwarded.
+
+            For guidance, if the rate of increase of this counter
+            exceeds 1% of the rate of increase of ipMcastRouteOctets,
+            then there are multicast routing problems that require
+            investigation.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteTimeStamp."
+    REFERENCE "RFC 4601 and RFC 5015"
+    ::= { ipMcastRouteEntry 22 }
+
+ipMcastRouteDifferentInIfPackets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which this router has received from
+            these sources and addressed to this multicast group address,
+            which were dropped because they were received on an
+            unexpected interface.
+
+            For RPF checking protocols (such as PIM-SM), these packets
+            arrived on interfaces other than ipMcastRouteInIfIndex, and
+            were dropped because of this failed RPF check.  (RPF paths
+            are 'Reverse Path Forwarding' path; the unicast routes to
+            the expected origin of multicast data flows).
+
+            Other protocols may drop packets on an incoming interface
+            check for different reasons (for example, BIDIR-PIM performs
+            a DF check on receipt of packets).  All packets dropped as a
+            result of an incoming interface check are counted here.
+
+            If this counter increases rapidly, this indicates a problem.
+            A significant quantity of multicast data is arriving at this
+            router on unexpected interfaces, and is not being forwarded.
+
+            For guidance, if the rate of increase of this counter
+
+            exceeds 1% of the rate of increase of ipMcastRoutePkts, then
+            there are multicast routing problems that require
+            investigation.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteTimeStamp."
+    REFERENCE "RFC 4601 and RFC 5015"
+    ::= { ipMcastRouteEntry 23 }
+
+ipMcastRouteBps OBJECT-TYPE
+    SYNTAX     CounterBasedGauge64
+    UNITS      "bits per second"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Bits per second forwarded by this router using this
+            multicast routing entry.
+
+            This value is a sample; it is the number of bits forwarded
+            during the last whole 1 second sampling period.  The value
+            during the current 1 second sampling period is not made
+            available until the period is completed.
+
+            The quantity being sampled is the same as that measured by
+            ipMcastRouteOctets.  The units and the sampling method are
+            different."
+    ::= { ipMcastRouteEntry 24 }
+--
+--  The IP Multicast Routing Next Hop Table
+--
+
+ipMcastRouteNextHopTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastRouteNextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on the
+            next-hops on outgoing interfaces for routing IP multicast
+            datagrams.  Each entry is one of a list of next-hops on
+            outgoing interfaces for particular sources sending to a
+            particular multicast group address."
+    ::= { ipMcast 6 }
+
+ipMcastRouteNextHopEntry OBJECT-TYPE
+    SYNTAX     IpMcastRouteNextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the list of next-hops on
+            outgoing interfaces to which IP multicast datagrams from
+            particular sources to an IP multicast group address are
+            routed.
+
+            OIDs are limited to 128 sub-identifiers, but this limit
+            is not enforced by the syntax of this entry.  In practice,
+            this does not present a problem, because IP address types
+            allowed by conformance statements do not exceed this limit."
+    INDEX      { ipMcastRouteNextHopGroupAddressType,
+                 ipMcastRouteNextHopGroup,
+                 ipMcastRouteNextHopGroupPrefixLength,
+                 ipMcastRouteNextHopSourceAddressType,
+                 ipMcastRouteNextHopSource,
+                 ipMcastRouteNextHopSourcePrefixLength,
+                 ipMcastRouteNextHopIfIndex,
+                 ipMcastRouteNextHopAddressType,
+                 ipMcastRouteNextHopAddress }
+    ::= { ipMcastRouteNextHopTable 1 }
+
+IpMcastRouteNextHopEntry ::= SEQUENCE {
+    ipMcastRouteNextHopGroupAddressType    InetAddressType,
+    ipMcastRouteNextHopGroup               InetAddress,
+    ipMcastRouteNextHopGroupPrefixLength   InetAddressPrefixLength,
+    ipMcastRouteNextHopSourceAddressType   InetAddressType,
+    ipMcastRouteNextHopSource              InetAddress,
+    ipMcastRouteNextHopSourcePrefixLength  InetAddressPrefixLength,
+    ipMcastRouteNextHopIfIndex             InterfaceIndex,
+    ipMcastRouteNextHopAddressType         InetAddressType,
+    ipMcastRouteNextHopAddress             InetAddress,
+    ipMcastRouteNextHopState               INTEGER,
+    ipMcastRouteNextHopTimeStamp           TimeStamp,
+    ipMcastRouteNextHopExpiryTime          TimeTicks,
+    ipMcastRouteNextHopClosestMemberHops   Unsigned32,
+    ipMcastRouteNextHopProtocol            IANAipMRouteProtocol,
+    ipMcastRouteNextHopOctets              Counter64,
+    ipMcastRouteNextHopPkts                Counter64
+}
+
+ipMcastRouteNextHopGroupAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+
+            contained in ipMcastRouteNextHopGroup.  Legal values
+            correspond to the subset of address families for which
+            multicast forwarding is supported."
+    ::= { ipMcastRouteNextHopEntry 1 }
+
+ipMcastRouteNextHopGroup OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address which, when combined with
+            the corresponding value specified in
+            ipMcastRouteNextHopGroupPrefixLength, identifies the groups
+            for which this entry contains multicast forwarding
+            information.
+
+            This address object is only significant up to
+            ipMcastRouteNextHopGroupPrefixLength bits.  The remaining
+            address bits are set to zero.  This is especially important
+            for this index field, which is part of the index of this
+            entry.  Any non-zero bits would signify an entirely
+            different entry.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            forwarding state applies only within the given zone.  Zone
+            index zero is not valid in this table."
+    ::= { ipMcastRouteNextHopEntry 2 }
+
+ipMcastRouteNextHopGroupPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+            the corresponding value of ipMcastRouteGroup, identifies the
+            groups for which this entry contains multicast routing
+            information.
+
+            The InetAddressType is given by
+            ipMcastRouteNextHopGroupAddressType.  For values 'ipv4' and
+            'ipv4z', this object must be in the range 4..32.  For values
+            'ipv6' and 'ipv6z', this object must be in the range
+            8..128."
+    ::= { ipMcastRouteNextHopEntry 3 }
+
+ipMcastRouteNextHopSourceAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastRouteNextHopSource.
+
+            A value of unknown(0) indicates a non-source-specific entry,
+            corresponding to all sources in the group.  Otherwise, the
+            value MUST be the same as the value of
+            ipMcastRouteNextHopGroupType."
+    ::= { ipMcastRouteNextHopEntry 4 }
+
+ipMcastRouteNextHopSource OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which, when combined with the
+            corresponding value of the mask specified in
+            ipMcastRouteNextHopSourcePrefixLength, identifies the
+            sources for which this entry specifies a next-hop on an
+            outgoing interface.
+
+            This address object is only significant up to
+            ipMcastRouteNextHopSourcePrefixLength bits.  The remaining
+            address bits are set to zero.  This is especially important
+            for this index field, which is part of the index of this
+            entry.  Any non-zero bits would signify an entirely
+            different entry.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            source address applies only within the given zone.  Zone
+            index zero is not valid in this table."
+    ::= { ipMcastRouteNextHopEntry 5 }
+
+ipMcastRouteNextHopSourcePrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+            the corresponding value specified in
+            ipMcastRouteNextHopSource, identifies the sources for which
+            this entry specifies a next-hop on an outgoing interface.
+
+            The InetAddressType is given by
+            ipMcastRouteNextHopSourceAddressType.  For the value
+            'unknown', this object must be zero.  For values 'ipv4' and
+            'ipv4z', this object must be in the range 4..32.  For values
+            'ipv6' and 'ipv6z', this object must be in the range
+            8..128."
+    ::= { ipMcastRouteNextHopEntry 6 }
+
+ipMcastRouteNextHopIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for the outgoing
+            interface for this next-hop."
+    ::= { ipMcastRouteNextHopEntry 7 }
+
+ipMcastRouteNextHopAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastRouteNextHopAddress."
+    ::= { ipMcastRouteNextHopEntry 8 }
+
+ipMcastRouteNextHopAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the next-hop specific to this entry.  For
+            most interfaces, this is identical to
+            ipMcastRouteNextHopGroup.  Non-Broadcast Multi-Access
+            (NBMA) interfaces, however, may
+            have multiple next-hop addresses out a single outgoing
+            interface."
+    ::= { ipMcastRouteNextHopEntry 9 }
+
+ipMcastRouteNextHopState OBJECT-TYPE
+    SYNTAX     INTEGER { pruned(1), forwarding(2) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An indication of whether the outgoing interface and next-
+            hop represented by this entry is currently being used to
+            forward IP datagrams.  The value 'forwarding' indicates it
+            is currently being used; the value 'pruned' indicates it is
+
+            not."
+    ::= { ipMcastRouteNextHopEntry 10 }
+
+ipMcastRouteNextHopTimeStamp OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at which the multicast routing
+            information represented by this entry was learned by the
+            router.
+
+            If this information was present at the most recent re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipMcastRouteNextHopEntry 11 }
+
+ipMcastRouteNextHopExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  If ipMcastRouteNextHopState is pruned(1), the
+            remaining time until the prune expires and the state reverts
+            to forwarding(2).  Otherwise, the remaining time until this
+            entry is removed from the table.  The time remaining may be
+            copied from ipMcastRouteExpiryTime if the protocol in use
+            for this entry does not specify next-hop timers.  The value
+            0 indicates that the entry is not subject to aging."
+    ::= { ipMcastRouteNextHopEntry 12 }
+
+ipMcastRouteNextHopClosestMemberHops OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..256)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum number of hops between this router and any
+            member of this IP multicast group reached via this next-hop
+            on this outgoing interface.  Any IP multicast datagrams for
+            the group that have a TTL (IPv4) or Hop Count (IPv6) less
+            than this number of hops will not be forwarded to this
+            next-hop.
+
+            A value of 0 means all multicast datagrams are forwarded out
+            the interface.  A value of 256 means that no multicast
+            datagrams are forwarded out the interface.
+
+            This is an optimization applied by multicast routing
+            protocols that explicitly track hop counts to downstream
+            listeners.  Multicast protocols that are not aware of hop
+            counts to downstream listeners set this object to 0."
+    ::= { ipMcastRouteNextHopEntry 13 }
+
+ipMcastRouteNextHopProtocol OBJECT-TYPE
+    SYNTAX     IANAipMRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which this next-hop was learned."
+    ::= { ipMcastRouteNextHopEntry 14 }
+
+ipMcastRouteNextHopOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have been
+            forwarded using this route.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteNextHopTimeStamp."
+    ::= { ipMcastRouteNextHopEntry 15 }
+
+ipMcastRouteNextHopPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which have been forwarded using this
+            route.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of routes being
+            removed and replaced, which can be detected by observing
+            the value of ipMcastRouteNextHopTimeStamp."
+    ::= { ipMcastRouteNextHopEntry 16 }
+
+--
+--  The IP Multicast Scope Boundary Table
+--
+
+ipMcastBoundaryTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastBoundaryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the system's multicast scope
+            zone boundaries."
+    REFERENCE "RFC 4007 Section 5"
+    ::= { ipMcast 7 }
+
+ipMcastBoundaryEntry OBJECT-TYPE
+    SYNTAX     IpMcastBoundaryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) describing one of this device's
+            multicast scope zone boundaries.
+
+            OIDs are limited to 128 sub-identifiers, but this limit
+            is not enforced by the syntax of this entry.  In practice,
+            this does not present a problem, because IP address types
+            allowed by conformance statements do not exceed this limit."
+    REFERENCE "RFC 2365 Section 5, RFC 4007 Section 5"
+    INDEX      { ipMcastBoundaryIfIndex,
+                 ipMcastBoundaryAddressType,
+                 ipMcastBoundaryAddress,
+                 ipMcastBoundaryAddressPrefixLength }
+    ::= { ipMcastBoundaryTable 1 }
+
+IpMcastBoundaryEntry ::= SEQUENCE {
+    ipMcastBoundaryIfIndex              InterfaceIndex,
+    ipMcastBoundaryAddressType          InetAddressType,
+    ipMcastBoundaryAddress              InetAddress,
+    ipMcastBoundaryAddressPrefixLength  InetAddressPrefixLength,
+    ipMcastBoundaryTimeStamp            TimeStamp,
+    ipMcastBoundaryDroppedMcastOctets   Counter64,
+    ipMcastBoundaryDroppedMcastPkts     Counter64,
+    ipMcastBoundaryStatus               RowStatus,
+    ipMcastBoundaryStorageType          StorageType
+}
+
+ipMcastBoundaryIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IfIndex value for the interface to which this boundary
+            applies.  Packets with a destination address in the
+
+            associated address/mask range will not be forwarded over
+            this interface.
+
+            For IPv4, zone boundaries cut through links.  Therefore,
+            this is an external interface.  This may be either a
+            physical or virtual interface (tunnel, encapsulation, and
+            so forth.)
+
+            For IPv6, zone boundaries cut through nodes.  Therefore,
+            this is a virtual interface within the node.  This is not
+            an external interface, either real or virtual.  Packets
+            crossing this interface neither arrive at nor leave the
+            node, but only move between zones within the node."
+    REFERENCE "RFC 2365 Section 5, RFC 4007 Section 5"
+    ::= { ipMcastBoundaryEntry 1 }
+
+ipMcastBoundaryAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastBoundaryAddress.  Legal values
+            correspond to the subset of address families for which
+            multicast forwarding is supported."
+    ::= { ipMcastBoundaryEntry 2 }
+
+ipMcastBoundaryAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address which, when combined with the
+            corresponding value of ipMcastBoundaryAddressPrefixLength,
+            identifies the group range for which the scoped boundary
+            exists.  Scoped IPv4 multicast address ranges must be
+            prefixed by 239.0.0.0/8.  Scoped IPv6 multicast address
+            ranges are FF0x::/16, where x is a valid RFC 4291 multicast
+            scope.
+
+            An IPv6 address prefixed by FF1x::/16 is a non-permanently-
+            assigned address.  An IPv6 address prefixed by FF3x::/16 is
+            a unicast-prefix-based multicast addresses.  A zone boundary
+            for FF0x::/16 implies an identical boundary for these other
+            prefixes.  No separate FF1x::/16 or FF3x::/16 entries exist
+            in this table.
+
+            This address object is only significant up to
+
+            ipMcastBoundaryAddressPrefixLength bits.  The remaining
+            address bits are set to zero.  This is especially important
+            for this index field, which is part of the index of this
+            entry.  Any non-zero bits would signify an entirely
+            different entry."
+    ::= { ipMcastBoundaryEntry 3 }
+
+ipMcastBoundaryAddressPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which when, combined with
+            the corresponding value of ipMcastBoundaryAddress,
+            identifies the group range for which the scoped boundary
+            exists.
+
+            The InetAddressType is given by ipMcastBoundaryAddressType.
+            For values 'ipv4' and 'ipv4z', this object must be in the
+            range 4..32.  For values 'ipv6' and 'ipv6z', this object
+            must be set to 16."
+    ::= { ipMcastBoundaryEntry 4 }
+
+ipMcastBoundaryTimeStamp OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at which the multicast boundary
+            information represented by this entry was learned by the
+            router.
+
+            If this information was present at the most recent re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipMcastBoundaryEntry 5 }
+
+ipMcastBoundaryDroppedMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have been
+            dropped as a result of this zone boundary configuration.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of boundary
+
+            configuration being removed and replaced, which can be
+            detected by observing the value of
+            ipMcastBoundaryTimeStamp."
+    ::= { ipMcastBoundaryEntry 6 }
+
+ipMcastBoundaryDroppedMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of multicast packets that have been dropped as a
+            result of this zone boundary configuration.
+
+            Discontinuities in this monotonically increasing value
+            occur at re-initialization of the management system.
+            Discontinuities can also occur as a result of boundary
+            configuration being removed and replaced, which can be
+            detected by observing the value of
+            ipMcastBoundaryTimeStamp."
+    ::= { ipMcastBoundaryEntry 7 }
+
+ipMcastBoundaryStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which rows in this table can
+            be created and destroyed.
+
+            This status object can be set to active(1) without setting
+            any other columnar objects in this entry.
+
+            All writeable objects in this entry can be modified when the
+            status of this entry is active(1)."
+    ::= { ipMcastBoundaryEntry 8 }
+
+ipMcastBoundaryStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The storage type for this row.  Rows having the value
+           'permanent' need not allow write-access to any columnar
+           objects in the row."
+       DEFVAL { nonVolatile }
+    ::= { ipMcastBoundaryEntry 9 }
+
+--
+
+--  The IP Multicast Scope Name Table
+--
+
+ipMcastScopeNameTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing multicast scope names."
+    REFERENCE "RFC 4007 Section 4"
+    ::= { ipMcast 8 }
+
+ipMcastScopeNameEntry OBJECT-TYPE
+    SYNTAX     IpMcastScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) that names a multicast address
+            scope.
+
+            OIDs are limited to 128 sub-identifiers, but this limit
+            is not enforced by the syntax of this entry.  In practice,
+            this does not present a problem, because IP address types
+            allowed by conformance statements do not exceed this limit."
+    REFERENCE "RFC 4007 Section 4"
+    INDEX      { ipMcastScopeNameAddressType,
+                 ipMcastScopeNameAddress,
+                 ipMcastScopeNameAddressPrefixLength,
+                 ipMcastScopeNameLanguage }
+    ::= { ipMcastScopeNameTable 1 }
+
+IpMcastScopeNameEntry ::= SEQUENCE {
+    ipMcastScopeNameAddressType          InetAddressType,
+    ipMcastScopeNameAddress              InetAddress,
+    ipMcastScopeNameAddressPrefixLength  InetAddressPrefixLength,
+    ipMcastScopeNameLanguage             LangTag,
+    ipMcastScopeNameString               SnmpAdminString,
+    ipMcastScopeNameDefault              TruthValue,
+    ipMcastScopeNameStatus               RowStatus,
+    ipMcastScopeNameStorageType          StorageType
+}
+
+ipMcastScopeNameAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+
+            contained in ipMcastScopeNameAddress.  Legal values
+            correspond to the subset of address families for which
+            multicast forwarding is supported."
+    ::= { ipMcastScopeNameEntry 1 }
+
+ipMcastScopeNameAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address which, when combined with the
+            corresponding value of ipMcastScopeNameAddressPrefixLength,
+            identifies the group range associated with the multicast
+            scope.  Scoped IPv4 multicast address ranges must be
+            prefixed by 239.0.0.0/8.  Scoped IPv6 multicast address
+            ranges are FF0x::/16, where x is a valid RFC 4291 multicast
+            scope.
+
+            An IPv6 address prefixed by FF1x::/16 is a non-permanently-
+            assigned address.  An IPv6 address prefixed by FF3x::/16 is
+            a unicast-prefix-based multicast addresses.  A scope
+            FF0x::/16 implies an identical scope name for these other
+            prefixes.  No separate FF1x::/16 or FF3x::/16 entries exist
+            in this table.
+
+            This address object is only significant up to
+            ipMcastScopeNameAddressPrefixLength bits.  The remaining
+            address bits are set to zero.  This is especially important
+            for this index field, which is part of the index of this
+            entry.  Any non-zero bits would signify an entirely
+            different entry."
+    ::= { ipMcastScopeNameEntry 2 }
+
+ipMcastScopeNameAddressPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+            the corresponding value of ipMcastScopeNameAddress,
+            identifies the group range associated with the multicast
+            scope.
+
+            The InetAddressType is given by ipMcastScopeNameAddressType.
+            For values 'ipv4' and 'ipv4z', this object must be in the
+            range 4..32.  For values 'ipv6' and 'ipv6z', this object
+            must be set to 16."
+    ::= { ipMcastScopeNameEntry 3 }
+
+ipMcastScopeNameLanguage OBJECT-TYPE
+    SYNTAX     LangTag
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Language tag associated with the scope name."
+    REFERENCE "RFC 4646"
+    ::= { ipMcastScopeNameEntry 4 }
+
+ipMcastScopeNameString OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The textual name associated with the multicast scope.  The
+            value of this object should be suitable for displaying to
+            end-users, such as when allocating a multicast address in
+            this scope.
+
+            When no name is specified, the default value of this object
+            for IPv4 should be the string 239.x.x.x/y with x and y
+            replaced with decimal values to describe the address and
+            mask length associated with the scope.
+
+            When no name is specified, the default value of this object
+            for IPv6 should be the string FF0x::/16, with x replaced by
+            the hexadecimal value for the RFC 4291 multicast scope.
+
+            An IPv6 address prefixed by FF1x::/16 is a non-permanently-
+            assigned address.  An IPv6 address prefixed by FF3x::/16 is
+            a unicast-prefix-based multicast addresses.  A scope
+            FF0x::/16 implies an identical scope name for these other
+            prefixes.  No separate FF1x::/16 or FF3x::/16 entries exist
+            in this table."
+    REFERENCE "RFC 2365, RFC 3306 Section 4, RFC 4291 Section 2.7"
+    ::= { ipMcastScopeNameEntry 5 }
+
+ipMcastScopeNameDefault OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "If true, indicates a preference that the name in the
+            following language should be used by applications if no name
+            is available in a desired language."
+    DEFVAL { false }
+    ::= { ipMcastScopeNameEntry 6 }
+
+ipMcastScopeNameStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which rows in this table can
+            be created and destroyed.  Before the row can be activated,
+            the object ipMcastScopeNameString must be set to a valid
+            value.  All writeable objects in this entry can be modified
+            when the status is active(1)."
+    ::= { ipMcastScopeNameEntry 7 }
+
+ipMcastScopeNameStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The storage type for this row.  Rows having the value
+           'permanent' need not allow write-access to any columnar
+           objects in the row."
+       DEFVAL { nonVolatile }
+    ::= { ipMcastScopeNameEntry 8 }
+
+--
+--  The Multicast Listeners Table
+--
+
+ipMcastLocalListenerTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastLocalListenerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing local applications or
+            services that have joined multicast groups as listeners.
+
+            Entries exist for all addresses in the multicast range for
+            all applications and services as they are classified on this
+            device."
+    ::= { ipMcast 9 }
+
+ipMcastLocalListenerEntry OBJECT-TYPE
+    SYNTAX     IpMcastLocalListenerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) identifying a local application
+            or service that has joined a multicast group as a listener.
+
+            OIDs are limited to 128 sub-identifiers, but this limit
+            is not enforced by the syntax of this entry.  In practice,
+            this does not present a problem, because IP address types
+            allowed by conformance statements do not exceed this limit."
+    INDEX      { ipMcastLocalListenerGroupAddressType,
+                 ipMcastLocalListenerGroupAddress,
+                 ipMcastLocalListenerSourceAddressType,
+                 ipMcastLocalListenerSourceAddress,
+                 ipMcastLocalListenerSourcePrefixLength,
+                 ipMcastLocalListenerIfIndex,
+                 ipMcastLocalListenerRunIndex }
+    ::= { ipMcastLocalListenerTable 1 }
+
+IpMcastLocalListenerEntry ::= SEQUENCE {
+    ipMcastLocalListenerGroupAddressType    InetAddressType,
+    ipMcastLocalListenerGroupAddress        InetAddress,
+    ipMcastLocalListenerSourceAddressType   InetAddressType,
+    ipMcastLocalListenerSourceAddress       InetAddress,
+    ipMcastLocalListenerSourcePrefixLength  InetAddressPrefixLength,
+    ipMcastLocalListenerIfIndex             InterfaceIndex,
+    ipMcastLocalListenerRunIndex            Unsigned32
+}
+
+ipMcastLocalListenerGroupAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastLocalListenerGroupAddress.  Legal values
+            correspond to the subset of address families for which
+            multicast is supported."
+    ::= { ipMcastLocalListenerEntry 1 }
+
+ipMcastLocalListenerGroupAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group for which this entry specifies
+            locally joined applications or services."
+    ::= { ipMcastLocalListenerEntry 2 }
+
+ipMcastLocalListenerSourceAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A value indicating the address family of the address
+            contained in ipMcastLocalListenerSource.
+
+            A value of unknown(0) indicates a non-source-specific entry,
+            corresponding to all sources in the group.  Otherwise, the
+            value MUST be the same as the value of
+            ipMcastLocalListenerGroupAddressType."
+    ::= { ipMcastLocalListenerEntry 3 }
+
+ipMcastLocalListenerSourceAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which, when combined with the
+            corresponding value of the mask specified in
+            ipMcastLocalListenerSourcePrefixLength, identifies the
+            sources for which this entry specifies a local listener.
+
+            This address object is only significant up to
+            ipMcastLocalListenerSourcePrefixLength bits.  The remaining
+            address bits are set to zero.  This is especially important
+            for this index field, which is part of the index of this
+            entry.  Any non-zero bits would signify an entirely
+            different entry.
+
+            For addresses of type ipv4z or ipv6z, the appended zone
+            index is significant even though it lies beyond the prefix
+            length.  The use of these address types indicate that this
+            listener address applies only within the given zone.  Zone
+            index zero is not valid in this table."
+    ::= { ipMcastLocalListenerEntry 4 }
+
+ipMcastLocalListenerSourcePrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined with
+            the corresponding value specified in
+            ipMcastLocalListenerSource, identifies the sources for which
+            this entry specifies a local listener.
+
+            The InetAddressType is given by
+            ipMcastLocalListenerSourceAddressType.  For the value
+            'unknown', this object must be zero.  For values 'ipv4' and
+            'ipv4z', this object must be in the range 4..32.  For values
+            'ipv6' and 'ipv6z', this object must be in the range
+
+            8..128."
+    ::= { ipMcastLocalListenerEntry 5 }
+
+ipMcastLocalListenerIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IfIndex value of the interface for which this entry
+            specifies a local listener."
+    ::= { ipMcastLocalListenerEntry 6 }
+
+ipMcastLocalListenerRunIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A unique value corresponding to a piece of software running
+            on this router or host system.  Where possible, this should
+            be the system's native, unique identification number.
+
+            This identifier is platform-specific.  It may correspond to
+            a process ID or application instance number.
+
+            A value of zero indicates that the application instance(s)
+            cannot be identified.  A value of zero indicates that one or
+            more unidentified applications have joined the specified
+            multicast groups (for the specified sources) as listeners."
+    REFERENCE "RFC 2287 sysApplRunIndex"
+    ::= { ipMcastLocalListenerEntry 7 }
+
+--
+--  The Multicast Zone Table
+--
+
+ipMcastZoneTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMcastZoneEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing scope zones on this device."
+    REFERENCE "RFC 4007 Section 5"
+    ::= { ipMcast 10 }
+
+ipMcastZoneEntry OBJECT-TYPE
+    SYNTAX     IpMcastZoneEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) describing a scope zone on this
+            device."
+    REFERENCE "RFC 4007 Section 5"
+    INDEX      { ipMcastZoneIndex }
+    ::= { ipMcastZoneTable 1 }
+
+IpMcastZoneEntry ::= SEQUENCE {
+    ipMcastZoneIndex                        InetZoneIndex,
+    ipMcastZoneScopeDefaultZoneIndex        InetZoneIndex,
+    ipMcastZoneScopeAddressType             InetAddressType,
+    ipMcastZoneScopeAddress                 InetAddress,
+    ipMcastZoneScopeAddressPrefixLength     InetAddressPrefixLength
+}
+
+ipMcastZoneIndex OBJECT-TYPE
+    SYNTAX     InetZoneIndex (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This zone index uniquely identifies a zone on a device.
+
+            Each zone is for a given scope.  Scope-level information in
+            this table is for the unique scope that corresponds to this
+            zone.
+
+            Zero is a special value used to request the default zone for
+            a given scope.  Zero is not a valid value for this object.
+
+            To test whether ipMcastZoneIndex is the default zone for
+            this scope, test whether ipMcastZoneIndex is equal to
+            ipMcastZoneScopeDefaultZoneIndex."
+    ::= { ipMcastZoneEntry 1 }
+
+ipMcastZoneScopeDefaultZoneIndex OBJECT-TYPE
+    SYNTAX     InetZoneIndex (1..4294967295)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The default zone index for this scope.  This is the zone
+            that this device will use if the default (zero) zone is
+            requested for this scope.
+
+            Zero is not a valid value for this object."
+    ::= { ipMcastZoneEntry 2 }
+
+ipMcastZoneScopeAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address type for which this scope zone exists."
+    ::= { ipMcastZoneEntry 3 }
+
+ipMcastZoneScopeAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address which, when combined with
+            ipMcastZoneScopeAddressPrefixLength, gives the multicast
+            address range for this scope.  The InetAddressType is given
+            by ipMcastZoneScopeAddressType.
+
+            Scoped IPv4 multicast address ranges are prefixed by
+            239.0.0.0/8.  Scoped IPv6 multicast address ranges are
+            FF0x::/16, where x is a valid RFC 4291 multicast scope.
+
+            An IPv6 address prefixed by FF1x::/16 is a non-permanently-
+            assigned address.  An IPv6 address prefixed by FF3x::/16 is
+            a unicast-prefix-based multicast addresses.  A scope
+            FF0x::/16 implies an identical scope for these other
+            prefixes.  No separate FF1x::/16 or FF3x::/16 entries exist
+            in this table.
+
+            This address object is only significant up to
+            ipMcastZoneScopeAddressPrefixLength bits.  The remaining
+            address bits are set to zero."
+    REFERENCE "RFC 2365, RFC 3306 Section 4, RFC 4291 Section 2.7"
+    ::= { ipMcastZoneEntry 4 }
+
+ipMcastZoneScopeAddressPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The length in bits of the mask which, when combined
+            with ipMcastZoneScopeAddress, gives the multicast address
+            prefix for this scope.
+
+            The InetAddressType is given by ipMcastZoneScopeAddressType.
+            For values 'ipv4' and 'ipv4z', this object must be in the
+            range 4..32.  For values 'ipv6' and 'ipv6z', this object
+            must be set to 16."
+    ::= { ipMcastZoneEntry 5 }
+
+--
+-- Conformance information
+--
+
+ipMcastMIBConformance
+                  OBJECT IDENTIFIER ::= { ipMcastMIB 2 }
+ipMcastMIBCompliances
+                  OBJECT IDENTIFIER ::= { ipMcastMIBConformance 1 }
+ipMcastMIBGroups  OBJECT IDENTIFIER ::= { ipMcastMIBConformance 2 }
+
+--
+-- Compliance statements
+--
+
+ipMcastMIBComplianceHost MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts supporting IPMCAST-MIB.
+
+            Support for either InetAddressType ipv4 or ipv6 is
+            mandatory; support for both InetAddressTypes ipv4 and ipv6
+            is optional.  Support for types ipv4z and ipv6z is
+            optional.
+
+            -- OBJECT     ipMcastLocalListenerGroupAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastLocalListenerGroupAddress
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastLocalListenerSourceAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastLocalListenerSourceAddress
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6."
+
+    MODULE  -- this module
+    MANDATORY-GROUPS { ipMcastMIBLocalListenerGroup,
+                       ipMcastMIBBasicGroup }
+
+      OBJECT     ipMcastEnabled
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastDeviceConfigStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      GROUP        ipMcastMIBSsmGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBRouteGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBRouteDiagnosticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBBoundaryIfGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBScopeNameGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { ipMcastMIBCompliances 1 }
+
+ipMcastMIBComplianceRouter MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers supporting
+            IPMCAST-MIB.
+
+            Support for either InetAddressType ipv4 or ipv6 is
+            mandatory; support for both InetAddressTypes ipv4 and ipv6
+            is optional.  Support for types ipv4z and ipv6z is
+            optional.
+
+            -- OBJECT     ipMcastSsmRangeAddressType
+            -- SYNTAX     InetAddressType {ipv4(1), ipv6(2), ipv4z(3),
+            --                             ipv6z(4)}
+
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastSsmRangeAddress
+            -- SYNTAX     InetAddress (SIZE (4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteGroupAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteGroup
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteSourceAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteSource
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteNextHopGroupAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteNextHopGroup
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteNextHopSourceAddressType
+
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                              ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteNextHopSource
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteNextHopAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteNextHopAddress
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6."
+
+    MODULE  -- this module
+    MANDATORY-GROUPS { ipMcastMIBRouteProtoGroup,
+                       ipMcastMIBBasicGroup,
+                       ipMcastMIBSsmGroup,
+                       ipMcastMIBRouteGroup }
+
+      OBJECT     ipMcastEnabled
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastDeviceConfigStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastInterfaceTtl
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastInterfaceRateLimit
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastInterfaceStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastRouteUpstreamNeighborType
+      SYNTAX     InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                   ipv4z(3), ipv6z(4) }
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          or ipv6."
+
+      OBJECT     ipMcastRouteUpstreamNeighbor
+      SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          or ipv6."
+
+      OBJECT     ipMcastRouteRtAddressType
+      SYNTAX     InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                   ipv4z(3), ipv6z(4) }
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          or ipv6."
+
+      OBJECT     ipMcastRouteRtAddress
+      SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          or ipv6."
+
+      OBJECT     ipMcastSsmRangeRowStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastSsmRangeStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      GROUP        ipMcastMIBRouteDiagnosticsGroup
+      DESCRIPTION
+          "This group is not mandatory, but SHOULD be supported where
+          hardware permits."
+
+      GROUP        ipMcastMIBPktsOutGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBHopCountGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBRouteOctetsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBRouteBpsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBLocalListenerGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBBoundaryIfGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBScopeNameGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { ipMcastMIBCompliances 2 }
+
+ipMcastMIBComplianceBorderRouter MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers on scope
+            boundaries supporting IPMCAST-MIB.
+
+            Support for either InetAddressType ipv4z or ipv6z is
+            mandatory; support for both InetAddressTypes ipv4z and
+            ipv6z is optional.
+
+            -- OBJECT     ipMcastSsmRangeAddressType
+            -- SYNTAX     InetAddressType {ipv4(1), ipv6(2), ipv4z(3),
+            --                             ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastSsmRangeAddress
+            -- SYNTAX     InetAddress (SIZE (4|8|16|20))
+
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteGroupAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastRouteGroup
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteSourceAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteSource
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteNextHopGroupAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteNextHopGroup
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteNextHopSourceAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+
+            --
+            -- OBJECT     ipMcastRouteNextHopSource
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteNextHopAddressType
+            -- SYNTAX     InetAddressType {unknown(0), ipv4(1), ipv6(2),
+            --                             ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastRouteNextHopAddress
+            -- SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+            -- DESCRIPTION
+            --     This compliance requires support for unknown and
+            --     either ipv4 and ipv4z or ipv6 and ipv6z.
+            --
+            -- OBJECT     ipMcastBoundaryAddressType
+            -- SYNTAX     InetAddressType {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastBoundaryAddress
+            -- SYNTAX     InetAddress (SIZE (4|16)
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastScopeNameAddressType
+            -- SYNTAX     InetAddressType {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6.
+            --
+            -- OBJECT     ipMcastScopeNameAddress
+            -- SYNTAX     InetAddress (SIZE (4|16)
+            -- DESCRIPTION
+            --     This compliance requires support for ipv4 or ipv6."
+
+    MODULE  -- this module
+    MANDATORY-GROUPS { ipMcastMIBRouteProtoGroup,
+                       ipMcastMIBBasicGroup,
+                       ipMcastMIBSsmGroup,
+                       ipMcastMIBRouteGroup,
+                       ipMcastMIBBoundaryIfGroup,
+                       ipMcastMIBScopeNameGroup }
+
+      OBJECT     ipMcastEnabled
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastDeviceConfigStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastInterfaceTtl
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastInterfaceRateLimit
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastInterfaceStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastRouteUpstreamNeighborType
+      SYNTAX     InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                   ipv4z(3), ipv6z(4) }
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          and ipv4z, or ipv6 and ipv6z."
+
+      OBJECT     ipMcastRouteUpstreamNeighbor
+      SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          and ipv4z, or ipv6 and ipv6z."
+
+      OBJECT     ipMcastRouteRtAddressType
+      SYNTAX     InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                   ipv4z(3), ipv6z(4) }
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          and ipv4z, or ipv6 and ipv6z."
+
+      OBJECT     ipMcastRouteRtAddress
+      SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+      DESCRIPTION
+          "This compliance requires support for unknown and either ipv4
+          and ipv4z, or ipv6 and ipv6z."
+
+      OBJECT     ipMcastSsmRangeRowStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     ipMcastSsmRangeStorageType
+      MIN-ACCESS read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      GROUP        ipMcastMIBRouteDiagnosticsGroup
+      DESCRIPTION
+          "This group is not mandatory, but SHOULD be supported where
+          hardware permits."
+
+      GROUP        ipMcastMIBPktsOutGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBHopCountGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBRouteOctetsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBRouteBpsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP        ipMcastMIBLocalListenerGroup
+      DESCRIPTION
+          "This group is optional."
+
+      OBJECT     ipMcastZoneScopeAddressType
+      SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+          "This compliance requires support for ipv4 or ipv6."
+
+      OBJECT     ipMcastZoneScopeAddress
+      SYNTAX     InetAddress (SIZE (4|16))
+      DESCRIPTION
+          "This compliance requires support for ipv4 or ipv6."
+    ::= { ipMcastMIBCompliances 3 }
+
+--
+-- Units of conformance
+--
+ipMcastMIBBasicGroup OBJECT-GROUP
+    OBJECTS { ipMcastEnabled,
+              ipMcastRouteEntryCount,
+              ipMcastDeviceConfigStorageType
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support basic management of IP
+            Multicast protocols."
+    ::= { ipMcastMIBGroups 1 }
+
+ipMcastMIBSsmGroup OBJECT-GROUP
+    OBJECTS { ipMcastSsmRangeRowStatus,
+              ipMcastSsmRangeStorageType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of Source-
+            Specific Multicast routing."
+    ::= { ipMcastMIBGroups 2 }
+
+ipMcastMIBRouteGroup OBJECT-GROUP
+    OBJECTS { ipMcastInterfaceTtl,
+              ipMcastInterfaceRateLimit,
+              ipMcastInterfaceStorageType,
+              ipMcastRouteUpstreamNeighborType,
+              ipMcastRouteUpstreamNeighbor,
+              ipMcastRouteInIfIndex,
+              ipMcastRouteTimeStamp,
+              ipMcastRouteExpiryTime,
+              ipMcastRouteNextHopState,
+              ipMcastRouteNextHopTimeStamp,
+              ipMcastRouteNextHopExpiryTime
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support basic management of IP
+            Multicast routing."
+    ::= { ipMcastMIBGroups 3 }
+
+ipMcastMIBRouteDiagnosticsGroup OBJECT-GROUP
+    OBJECTS { ipMcastRoutePkts,
+              ipMcastRouteTtlDropPackets,
+              ipMcastRouteDifferentInIfPackets
+
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of routing diagnostic packet counters."
+    ::= { ipMcastMIBGroups 4 }
+
+ipMcastMIBPktsOutGroup OBJECT-GROUP
+    OBJECTS { ipMcastRouteNextHopTimeStamp,
+              ipMcastRouteNextHopPkts }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of packet
+            counters for each outgoing interface entry of a route."
+    ::= { ipMcastMIBGroups 5 }
+
+ipMcastMIBHopCountGroup OBJECT-GROUP
+    OBJECTS { ipMcastRouteNextHopClosestMemberHops }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of the use of
+            hop counts in IP Multicast routing."
+    ::= { ipMcastMIBGroups 6 }
+
+ipMcastMIBRouteOctetsGroup OBJECT-GROUP
+    OBJECTS { ipMcastRouteTimeStamp,
+              ipMcastRouteOctets,
+              ipMcastRouteTtlDropOctets,
+              ipMcastRouteDifferentInIfOctets,
+              ipMcastRouteNextHopTimeStamp,
+              ipMcastRouteNextHopOctets }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of octet
+            counters for each forwarding entry."
+    ::= { ipMcastMIBGroups 7 }
+
+ipMcastMIBRouteBpsGroup OBJECT-GROUP
+    OBJECTS { ipMcastRouteBps }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support sampling of data rate
+            in bits per second for each forwarding entry."
+    ::= { ipMcastMIBGroups 8 }
+
+ipMcastMIBRouteProtoGroup OBJECT-GROUP
+    OBJECTS { ipMcastRouteProtocol, ipMcastRouteRtProtocol,
+              ipMcastRouteRtAddressType, ipMcastRouteRtAddress,
+              ipMcastRouteRtPrefixLength, ipMcastRouteRtType,
+              ipMcastRouteNextHopProtocol }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            relationship between multicast routing information and the
+            IP Forwarding Table."
+    ::= { ipMcastMIBGroups 9 }
+
+ipMcastMIBLocalListenerGroup OBJECT-GROUP
+    OBJECTS { ipMcastLocalListenerRunIndex }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of local
+            listeners on hosts or routers."
+    ::= { ipMcastMIBGroups 10 }
+
+ipMcastMIBBoundaryIfGroup OBJECT-GROUP
+    OBJECTS { ipMcastBoundaryTimeStamp,
+              ipMcastBoundaryDroppedMcastOctets,
+              ipMcastBoundaryDroppedMcastPkts,
+              ipMcastBoundaryStatus,
+              ipMcastBoundaryStorageType,
+              ipMcastZoneScopeDefaultZoneIndex,
+              ipMcastZoneScopeAddressType,
+              ipMcastZoneScopeAddress,
+              ipMcastZoneScopeAddressPrefixLength
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of multicast
+            scope zone boundaries."
+    ::= { ipMcastMIBGroups 11 }
+
+ipMcastMIBScopeNameGroup OBJECT-GROUP
+    OBJECTS { ipMcastScopeNameString, ipMcastScopeNameDefault,
+              ipMcastScopeNameStatus, ipMcastScopeNameStorageType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of multicast
+            address scope names."
+    ::= { ipMcastMIBGroups 12 }
+
+END
diff --git a/snmp_builder/mibs/IPMROUTE-STD-MIB.mib b/snmp_builder/mibs/IPMROUTE-STD-MIB.mib
new file mode 100644
index 0000000..095d0b8
--- /dev/null
+++ b/snmp_builder/mibs/IPMROUTE-STD-MIB.mib
@@ -0,0 +1,869 @@
+IPMROUTE-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+    Integer32, Counter32, Counter64, Gauge32,
+    IpAddress, TimeTicks             FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION,
+    TruthValue                       FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
+    SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+    InterfaceIndexOrZero,
+    InterfaceIndex                   FROM IF-MIB
+    IANAipRouteProtocol,
+    IANAipMRouteProtocol             FROM IANA-RTPROTO-MIB;
+
+ipMRouteStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200009220000Z" -- September 22, 2000
+    ORGANIZATION "IETF IDMR Working Group"
+    CONTACT-INFO
+            " Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA  98052-6399
+              US
+
+              Phone: +1 425 703 8835
+              EMail: dthaler@microsoft.com"
+    DESCRIPTION
+            "The MIB module for management of IP Multicast routing, but
+            independent of the specific multicast routing protocol in
+            use."
+    REVISION     "200009220000Z" -- September 22, 2000
+    DESCRIPTION
+            "Initial version, published as RFC 2932."
+    ::= { mib-2 83 }
+
+-- Textual Conventions
+
+LanguageTag ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "100a"
+   STATUS       current
+   DESCRIPTION
+            "An RFC 1766-style language tag, with all alphabetic
+            characters converted to lowercase.  This restriction is
+            intended to make the lexical ordering imposed by SNMP useful
+
+            when applied to language tags.  Note that it is
+            theoretically possible for a valid language tag to exceed
+            the allowed length of this syntax, and thus be impossible to
+            represent with this syntax.  Sampling of language tags in
+            current use on the Internet suggests that this limit does
+            not pose a serious problem in practice."
+   SYNTAX       OCTET STRING (SIZE (1..100))
+
+-- Top-level structure of the MIB
+
+ipMRouteMIBObjects OBJECT IDENTIFIER ::= { ipMRouteStdMIB 1 }
+
+ipMRoute      OBJECT IDENTIFIER ::= { ipMRouteMIBObjects 1 }
+
+-- the IP Multicast Routing MIB-Group
+--
+-- a collection of objects providing information about
+-- IP Multicast Groups
+
+ipMRouteEnable OBJECT-TYPE
+    SYNTAX     INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The enabled status of IP Multicast routing on this router."
+    ::= { ipMRoute 1 }
+
+ipMRouteEntryCount OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of rows in the ipMRouteTable.  This can be used
+            to monitor the multicast routing table size."
+    ::= { ipMRoute 7 }
+
+ipMRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing multicast routing
+            information for IP datagrams sent by particular sources to
+            the IP multicast groups known to this router."
+    ::= { ipMRoute 2 }
+
+ipMRouteEntry OBJECT-TYPE
+    SYNTAX     IpMRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the multicast routing
+            information for IP datagrams from a particular source and
+            addressed to a particular IP multicast group address.
+            Discontinuities in counters in this entry can be detected by
+            observing the value of ipMRouteUpTime."
+    INDEX      { ipMRouteGroup,
+                 ipMRouteSource,
+                 ipMRouteSourceMask }
+    ::= { ipMRouteTable 1 }
+
+IpMRouteEntry ::= SEQUENCE {
+    ipMRouteGroup                 IpAddress,
+    ipMRouteSource                IpAddress,
+    ipMRouteSourceMask            IpAddress,
+    ipMRouteUpstreamNeighbor      IpAddress,
+    ipMRouteInIfIndex             InterfaceIndexOrZero,
+    ipMRouteUpTime                TimeTicks,
+    ipMRouteExpiryTime            TimeTicks,
+    ipMRoutePkts                  Counter32,
+    ipMRouteDifferentInIfPackets  Counter32,
+    ipMRouteOctets                Counter32,
+    ipMRouteProtocol              IANAipMRouteProtocol,
+    ipMRouteRtProto               IANAipRouteProtocol,
+    ipMRouteRtAddress             IpAddress,
+    ipMRouteRtMask                IpAddress,
+    ipMRouteRtType                INTEGER,
+    ipMRouteHCOctets              Counter64
+}
+
+ipMRouteGroup OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains multicast routing information."
+    ::= { ipMRouteEntry 1 }
+
+ipMRouteSource OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which when combined with the
+            corresponding value of ipMRouteSourceMask identifies the
+            sources for which this entry contains multicast routing
+            information."
+    ::= { ipMRouteEntry 2 }
+
+ipMRouteSourceMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network mask which when combined with the corresponding
+            value of ipMRouteSource identifies the sources for which
+            this entry contains multicast routing information."
+    ::= { ipMRouteEntry 3 }
+
+ipMRouteUpstreamNeighbor OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the upstream neighbor (e.g., RPF neighbor)
+            from which IP datagrams from these sources to this multicast
+            address are received, or 0.0.0.0 if the upstream neighbor is
+            unknown (e.g., in CBT)."
+    ::= { ipMRouteEntry 4 }
+
+ipMRouteInIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface on which IP
+            datagrams sent by these sources to this multicast address
+            are received.  A value of 0 indicates that datagrams are not
+            subject to an incoming interface check, but may be accepted
+            on multiple interfaces (e.g., in CBT)."
+    ::= { ipMRouteEntry 5 }
+
+ipMRouteUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since the multicast routing information
+            represented by this entry was learned by the router."
+    ::= { ipMRouteEntry 6 }
+
+ipMRouteExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  The value 0 indicates that the entry is not
+            subject to aging."
+    ::= { ipMRouteEntry 7 }
+
+ipMRoutePkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which this router has received from
+            these sources and addressed to this multicast group
+            address."
+    ::= { ipMRouteEntry 8 }
+
+ipMRouteDifferentInIfPackets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which this router has received from
+            these sources and addressed to this multicast group address,
+            which were dropped because they were not received on the
+            interface indicated by ipMRouteInIfIndex.  Packets which are
+            not subject to an incoming interface check (e.g., using CBT)
+            are not counted."
+    ::= { ipMRouteEntry 9 }
+
+ipMRouteOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams which were
+            received from these sources and addressed to this multicast
+            group address, and which were forwarded by this router."
+    ::= { ipMRouteEntry 10 }
+
+ipMRouteProtocol OBJECT-TYPE
+    SYNTAX     IANAipMRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The multicast routing protocol via which this multicast
+            forwarding entry was learned."
+    ::= { ipMRouteEntry 11 }
+
+ipMRouteRtProto OBJECT-TYPE
+    SYNTAX     IANAipRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which the route used to find the
+            upstream or parent interface for this multicast forwarding
+            entry was learned.  Inclusion of values for routing
+            protocols is not intended to imply that those protocols need
+            be supported."
+    ::= { ipMRouteEntry 12 }
+
+ipMRouteRtAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address portion of the route used to find the upstream
+            or parent interface for this multicast forwarding entry."
+    ::= { ipMRouteEntry 13 }
+
+ipMRouteRtMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The mask associated with the route used to find the upstream
+            or parent interface for this multicast forwarding entry."
+    ::= { ipMRouteEntry 14 }
+
+ipMRouteRtType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                unicast (1),  -- Unicast route used in multicast RIB
+                multicast (2) -- Multicast route
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The reason the given route was placed in the (logical)
+            multicast Routing Information Base (RIB).  A value of
+            unicast means that the route would normally be placed only
+            in the unicast RIB, but was placed in the multicast RIB
+            (instead or in addition) due to local configuration, such as
+            when running PIM over RIP.  A value of multicast means that
+
+            the route was explicitly added to the multicast RIB by the
+            routing protocol, such as DVMRP or Multiprotocol BGP."
+    ::= { ipMRouteEntry 15 }
+
+ipMRouteHCOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets contained in IP datagrams which were
+            received from these sources and addressed to this multicast
+            group address, and which were forwarded by this router.
+            This object is a 64-bit version of ipMRouteOctets."
+    ::= { ipMRouteEntry 16 }
+
+--
+--  The IP Multicast Routing Next Hop Table
+--
+
+ipMRouteNextHopTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRouteNextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on the next-
+            hops on outgoing interfaces for routing IP multicast
+            datagrams.  Each entry is one of a list of next-hops on
+            outgoing interfaces for particular sources sending to a
+            particular multicast group address."
+    ::= { ipMRoute 3 }
+
+ipMRouteNextHopEntry OBJECT-TYPE
+    SYNTAX     IpMRouteNextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the list of next-hops on
+            outgoing interfaces to which IP multicast datagrams from
+            particular sources to a IP multicast group address are
+            routed.  Discontinuities in counters in this entry can be
+            detected by observing the value of ipMRouteUpTime."
+    INDEX      { ipMRouteNextHopGroup, ipMRouteNextHopSource,
+                 ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex,
+                 ipMRouteNextHopAddress }
+    ::= { ipMRouteNextHopTable 1 }
+
+IpMRouteNextHopEntry ::= SEQUENCE {
+    ipMRouteNextHopGroup              IpAddress,
+    ipMRouteNextHopSource             IpAddress,
+    ipMRouteNextHopSourceMask         IpAddress,
+    ipMRouteNextHopIfIndex            InterfaceIndex,
+    ipMRouteNextHopAddress            IpAddress,
+    ipMRouteNextHopState              INTEGER,
+    ipMRouteNextHopUpTime             TimeTicks,
+    ipMRouteNextHopExpiryTime         TimeTicks,
+    ipMRouteNextHopClosestMemberHops  Integer32,
+    ipMRouteNextHopProtocol           IANAipMRouteProtocol,
+    ipMRouteNextHopPkts               Counter32
+}
+
+ipMRouteNextHopGroup OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group for which this entry specifies a
+            next-hop on an outgoing interface."
+    ::= { ipMRouteNextHopEntry 1 }
+
+ipMRouteNextHopSource OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network address which when combined with the
+            corresponding value of ipMRouteNextHopSourceMask identifies
+            the sources for which this entry specifies a next-hop on an
+            outgoing interface."
+    ::= { ipMRouteNextHopEntry 2 }
+
+ipMRouteNextHopSourceMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The network mask which when combined with the corresponding
+            value of ipMRouteNextHopSource identifies the sources for
+            which this entry specifies a next-hop on an outgoing
+            interface."
+    ::= { ipMRouteNextHopEntry 3 }
+
+ipMRouteNextHopIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for the outgoing
+            interface for this next-hop."
+    ::= { ipMRouteNextHopEntry 4 }
+
+ipMRouteNextHopAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the next-hop specific to this entry.  For
+            most interfaces, this is identical to ipMRouteNextHopGroup.
+            NBMA interfaces, however, may have multiple next-hop
+            addresses out a single outgoing interface."
+    ::= { ipMRouteNextHopEntry 5 }
+
+ipMRouteNextHopState OBJECT-TYPE
+    SYNTAX     INTEGER { pruned(1), forwarding(2) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An indication of whether the outgoing interface and next-
+            hop represented by this entry is currently being used to
+            forward IP datagrams.  The value 'forwarding' indicates it
+            is currently being used; the value 'pruned' indicates it is
+            not."
+    ::= { ipMRouteNextHopEntry 6 }
+
+ipMRouteNextHopUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since the multicast routing information
+            represented by this entry was learned by the router."
+    ::= { ipMRouteNextHopEntry 7 }
+
+ipMRouteNextHopExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum amount of time remaining before this entry will
+            be aged out.  If ipMRouteNextHopState is pruned(1), the
+            remaining time until the prune expires and the state reverts
+            to forwarding(2).  Otherwise, the remaining time until this
+            entry is removed from the table.  The time remaining may be
+            copied from ipMRouteExpiryTime if the protocol in use for
+            this entry does not specify next-hop timers.  The value 0
+
+            indicates that the entry is not subject to aging."
+    ::= { ipMRouteNextHopEntry 8 }
+
+ipMRouteNextHopClosestMemberHops OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum number of hops between this router and any
+            member of this IP multicast group reached via this next-hop
+            on this outgoing interface.  Any IP multicast datagrams for
+            the group which have a TTL less than this number of hops
+            will not be forwarded to this next-hop."
+    ::= { ipMRouteNextHopEntry 9 }
+
+ipMRouteNextHopProtocol OBJECT-TYPE
+    SYNTAX     IANAipMRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which this next-hop was learned."
+    ::= { ipMRouteNextHopEntry 10 }
+
+ipMRouteNextHopPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets which have been forwarded using this
+            route."
+    ::= { ipMRouteNextHopEntry 11 }
+
+--
+--  The Multicast Routing Interface Table
+--
+
+ipMRouteInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRouteInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing multicast routing
+            information specific to interfaces."
+    ::= { ipMRoute 4 }
+
+ipMRouteInterfaceEntry OBJECT-TYPE
+    SYNTAX     IpMRouteInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the multicast routing
+            information for a particular interface."
+    INDEX      { ipMRouteInterfaceIfIndex }
+    ::= { ipMRouteInterfaceTable 1 }
+
+IpMRouteInterfaceEntry ::= SEQUENCE {
+    ipMRouteInterfaceIfIndex          InterfaceIndex,
+    ipMRouteInterfaceTtl              Integer32,
+    ipMRouteInterfaceProtocol         IANAipMRouteProtocol,
+    ipMRouteInterfaceRateLimit        Integer32,
+    ipMRouteInterfaceInMcastOctets    Counter32,
+    ipMRouteInterfaceOutMcastOctets   Counter32,
+    ipMRouteInterfaceHCInMcastOctets  Counter64,
+    ipMRouteInterfaceHCOutMcastOctets Counter64
+}
+
+ipMRouteInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for which this entry
+            contains information."
+    ::= { ipMRouteInterfaceEntry 1 }
+
+ipMRouteInterfaceTtl OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The datagram TTL threshold for the interface. Any IP
+            multicast datagrams with a TTL less than this threshold will
+            not be forwarded out the interface. The default value of 0
+            means all multicast packets are forwarded out the
+            interface."
+    ::= { ipMRouteInterfaceEntry 2 }
+
+ipMRouteInterfaceProtocol OBJECT-TYPE
+    SYNTAX     IANAipMRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing protocol running on this interface."
+    ::= { ipMRouteInterfaceEntry 3 }
+
+ipMRouteInterfaceRateLimit OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The rate-limit, in kilobits per second, of forwarded
+            multicast traffic on the interface.  A rate-limit of 0
+            indicates that no rate limiting is done."
+    DEFVAL     { 0 }
+    ::= { ipMRouteInterfaceEntry 4 }
+
+ipMRouteInterfaceInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have arrived
+            on the interface, including framing characters.  This object
+            is similar to ifInOctets in the Interfaces MIB, except that
+            only multicast packets are counted."
+    ::= { ipMRouteInterfaceEntry 5 }
+
+ipMRouteInterfaceOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have been
+            sent on the interface."
+    ::= { ipMRouteInterfaceEntry 6 }
+
+ipMRouteInterfaceHCInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have arrived
+            on the interface, including framing characters.  This object
+            is a 64-bit version of ipMRouteInterfaceInMcastOctets.  It
+            is similar to ifHCInOctets in the Interfaces MIB, except
+            that only multicast packets are counted."
+    ::= { ipMRouteInterfaceEntry 7 }
+
+ipMRouteInterfaceHCOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of octets of multicast packets that have been
+
+            sent on the interface.  This object is a 64-bit version of
+            ipMRouteInterfaceOutMcastOctets."
+    ::= { ipMRouteInterfaceEntry 8 }
+
+--
+--  The IP Multicast Scope Boundary Table
+--
+
+ipMRouteBoundaryTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRouteBoundaryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the router's scoped
+            multicast address boundaries."
+    ::= { ipMRoute 5 }
+
+ipMRouteBoundaryEntry OBJECT-TYPE
+    SYNTAX     IpMRouteBoundaryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the ipMRouteBoundaryTable
+            representing a scoped boundary."
+    INDEX      { ipMRouteBoundaryIfIndex, ipMRouteBoundaryAddress,
+                 ipMRouteBoundaryAddressMask }
+    ::= { ipMRouteBoundaryTable 1 }
+
+IpMRouteBoundaryEntry ::= SEQUENCE {
+    ipMRouteBoundaryIfIndex            InterfaceIndex,
+    ipMRouteBoundaryAddress            IpAddress,
+    ipMRouteBoundaryAddressMask        IpAddress,
+    ipMRouteBoundaryStatus             RowStatus
+}
+
+ipMRouteBoundaryIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IfIndex value for the interface to which this boundary
+            applies.  Packets with a destination address in the
+            associated address/mask range will not be forwarded out this
+            interface."
+    ::= { ipMRouteBoundaryEntry 1 }
+
+ipMRouteBoundaryAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address which when combined with the
+            corresponding value of ipMRouteBoundaryAddressMask
+            identifies the group range for which the scoped boundary
+            exists.  Scoped addresses must come from the range 239.x.x.x
+            as specified in RFC 2365."
+    ::= { ipMRouteBoundaryEntry 2 }
+
+ipMRouteBoundaryAddressMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address mask which when combined with the
+            corresponding value of ipMRouteBoundaryAddress identifies
+            the group range for which the scoped boundary exists."
+    ::= { ipMRouteBoundaryEntry 3 }
+
+ipMRouteBoundaryStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table."
+    ::= { ipMRouteBoundaryEntry 4 }
+
+--
+--  The IP Multicast Scope Name Table
+--
+
+ipMRouteScopeNameTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpMRouteScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the multicast scope names."
+    ::= { ipMRoute 6 }
+
+ipMRouteScopeNameEntry OBJECT-TYPE
+    SYNTAX     IpMRouteScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the ipMRouteScopeNameTable
+            representing a multicast scope name."
+    INDEX      { ipMRouteScopeNameAddress,
+                 ipMRouteScopeNameAddressMask,
+                 IMPLIED ipMRouteScopeNameLanguage }
+    ::= { ipMRouteScopeNameTable 1 }
+
+IpMRouteScopeNameEntry ::= SEQUENCE {
+    ipMRouteScopeNameAddress            IpAddress,
+    ipMRouteScopeNameAddressMask        IpAddress,
+    ipMRouteScopeNameLanguage           LanguageTag,
+    ipMRouteScopeNameString             SnmpAdminString,
+    ipMRouteScopeNameDefault            TruthValue,
+    ipMRouteScopeNameStatus             RowStatus
+}
+
+ipMRouteScopeNameAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address which when combined with the
+            corresponding value of ipMRouteScopeNameAddressMask
+            identifies the group range associated with the multicast
+            scope.  Scoped addresses must come from the range
+            239.x.x.x."
+    ::= { ipMRouteScopeNameEntry 1 }
+
+ipMRouteScopeNameAddressMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The group address mask which when combined with the
+            corresponding value of ipMRouteScopeNameAddress identifies
+            the group range associated with the multicast scope."
+    ::= { ipMRouteScopeNameEntry 2 }
+
+ipMRouteScopeNameLanguage OBJECT-TYPE
+    SYNTAX     LanguageTag
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The RFC 1766-style language tag associated with the scope
+            name."
+    ::= { ipMRouteScopeNameEntry 3 }
+
+ipMRouteScopeNameString OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The textual name associated with the multicast scope.  The
+            value of this object should be suitable for displaying to
+            end-users, such as when allocating a multicast address in
+            this scope.  When no name is specified, the default value of
+            this object should be the string 239.x.x.x/y with x and y
+            replaced appropriately to describe the address and mask
+            length associated with the scope."
+    ::= { ipMRouteScopeNameEntry 4 }
+
+ipMRouteScopeNameDefault OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "If true, indicates a preference that the name in the
+            following language should be used by applications if no name
+            is available in a desired language."
+    DEFVAL { false }
+    ::= { ipMRouteScopeNameEntry 5 }
+
+ipMRouteScopeNameStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table."
+    ::= { ipMRouteScopeNameEntry 6 }
+
+-- conformance information
+
+ipMRouteMIBConformance
+                  OBJECT IDENTIFIER ::= { ipMRouteStdMIB 2 }
+ipMRouteMIBCompliances
+                  OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 1 }
+ipMRouteMIBGroups  OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 2 }
+
+-- compliance statements
+
+ipMRouteMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for the IP Multicast MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { ipMRouteMIBBasicGroup,
+                       ipMRouteMIBRouteGroup}
+
+        GROUP   ipMRouteMIBBoundaryGroup
+        DESCRIPTION
+            "This group is mandatory if the router supports
+            administratively-scoped multicast address boundaries."
+
+        OBJECT      ipMRouteBoundaryStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ipMRouteScopeNameStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP   ipMRouteMIBHCInterfaceGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            for which the value of the corresponding instance of ifSpeed
+            is greater than 20,000,000 bits/second."
+    ::= { ipMRouteMIBCompliances 1 }
+
+-- units of conformance
+
+ipMRouteMIBBasicGroup OBJECT-GROUP
+    OBJECTS { ipMRouteEnable, ipMRouteEntryCount,
+              ipMRouteUpstreamNeighbor, ipMRouteInIfIndex,
+              ipMRouteUpTime, ipMRouteExpiryTime,
+              ipMRouteNextHopState,
+              ipMRouteNextHopUpTime,
+              ipMRouteNextHopExpiryTime,
+              ipMRouteNextHopProtocol,
+              ipMRouteNextHopPkts,
+              ipMRouteInterfaceTtl,
+              ipMRouteInterfaceProtocol, ipMRouteInterfaceRateLimit,
+              ipMRouteInterfaceInMcastOctets,
+              ipMRouteInterfaceOutMcastOctets,
+              ipMRouteProtocol
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support basic management of IP
+            Multicast routing."
+    ::= { ipMRouteMIBGroups 1 }
+
+ipMRouteMIBHopCountGroup OBJECT-GROUP
+    OBJECTS { ipMRouteNextHopClosestMemberHops }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of the use of
+            hop counts in IP Multicast routing."
+    ::= { ipMRouteMIBGroups 2 }
+
+ipMRouteMIBBoundaryGroup OBJECT-GROUP
+    OBJECTS { ipMRouteBoundaryStatus, ipMRouteScopeNameString,
+              ipMRouteScopeNameDefault, ipMRouteScopeNameStatus }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of scoped
+            multicast address boundaries."
+    ::= { ipMRouteMIBGroups 3 }
+
+ipMRouteMIBPktsOutGroup OBJECT-GROUP
+    OBJECTS { ipMRouteNextHopPkts }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of packet
+            counters for each outgoing interface entry of a route."
+    ::= { ipMRouteMIBGroups 4 }
+
+ipMRouteMIBHCInterfaceGroup OBJECT-GROUP
+    OBJECTS { ipMRouteInterfaceHCInMcastOctets,
+              ipMRouteInterfaceHCOutMcastOctets,
+              ipMRouteHCOctets }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second) network
+            interfaces."
+    ::= { ipMRouteMIBGroups 5 }
+
+ipMRouteMIBRouteGroup OBJECT-GROUP
+    OBJECTS { ipMRouteRtProto, ipMRouteRtAddress,
+              ipMRouteRtMask, ipMRouteRtType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            relationship between multicast routing information, and the
+            IP Forwarding Table."
+    ::= { ipMRouteMIBGroups 6 }
+
+ipMRouteMIBPktsGroup OBJECT-GROUP
+    OBJECTS { ipMRoutePkts, ipMRouteDifferentInIfPackets,
+              ipMRouteOctets }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of packet
+            counters for each forwarding entry."
+    ::= { ipMRouteMIBGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/IPOA-MIB.mib b/snmp_builder/mibs/IPOA-MIB.mib
new file mode 100644
index 0000000..6ea421e
--- /dev/null
+++ b/snmp_builder/mibs/IPOA-MIB.mib
@@ -0,0 +1,1654 @@
+IPOA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    transmission, Integer32, IpAddress, Counter32,
+    Gauge32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    ipNetToMediaNetAddress, ipNetToMediaIfIndex,
+    ipNetToMediaPhysAddress, ipAdEntAddr
+        FROM IP-MIB
+
+--  The following textual conventions are defined locally within
+--  this MIB module.  They have been prefixed with 'Ipoa' to
+--  distinguish them from their counterparts in the ATM-TC-MIB.
+--  This was done so that the IPOA-MIB could be advanced as
+--  a standards-based MIB without waiting for the ATM-TC-MIB.
+
+--  AtmConnKind, AtmAddr
+--      FROM ATM-TC-MIB
+
+    InterfaceIndex, InterfaceIndexOrZero
+        FROM IF-MIB
+    ;
+
+ipoaMIB MODULE-IDENTITY
+    LAST-UPDATED "9802090000Z" -- February 9, 1998
+    ORGANIZATION "IETF Internetworking Over NBMA Working
+                  Group (ion)"
+    CONTACT-INFO
+        "Maria Greene (greene@xedia.com)
+         Xedia Corp.
+
+         Jim Luciani (jluciani@BayNetworks.com)
+         Bay Networks
+
+         Kenneth White (kennethw@vnet.ibm.com)
+         IBM Corp.
+
+         Ted Kuo (tkuo@eos.ncsu.edu)
+         Bay Networks"
+    DESCRIPTION
+        "This module defines a portion of the management
+
+        information base (MIB) for managing Classical IP and
+        ARP over ATM entities."
+    ::= { transmission 46 }
+
+-- Textual Conventions
+
+IpoaEncapsType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The encapsulation type used on a VC."
+    SYNTAX      INTEGER {
+                    llcSnap(1),
+                    vcMuxed(2),
+                    other(3)
+                }
+
+IpoaVpiInteger ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+        "An integer large enough to contain the value of a VPI."
+    SYNTAX     Integer32 (0..255)
+
+IpoaVciInteger ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+        "An integer large enough to contain the value of a VCI."
+    SYNTAX     Integer32 (0..65535)
+
+IpoaAtmAddr ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x"
+    STATUS  current
+    DESCRIPTION
+       "The ATM address used by the network entity.
+        The semantics are implied by the length.
+        The address types are:
+
+        - no address (0 octets)
+        - E.164 (8 octets)
+        - NSAP (20 octets)
+
+        In addition, when subaddresses are used IpoaAtmAddr
+        may represent the concatenation of address and
+        subaddress.  The associated address types are:
+
+        - E.164, E.164 (16 octets)
+        - E.164, NSAP (28 octets)
+        - NSAP, NSAP (40 octets)
+
+        Address lengths other than defined in this definition
+        imply address types defined elsewhere.
+        Note: The E.164 address is encoded in BCD format."
+    SYNTAX   OCTET STRING (SIZE(0..40))
+
+IpoaAtmConnKind ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "The use of call control.  The use is as follows:
+           pvc(1)
+              Virtual link of a PVC.  Should not be
+              used in a PVC/SVC (i.e., SPVC)
+              crossconnect.
+           svcIncoming(2)
+              Virtual link established after a
+              received signaling request to setup
+              an SVC.
+           svcOutgoing(3)
+              Virtual link established after a
+              transmitted or forwarded signaling
+              request to setup an SVC.
+           spvcInitiator(4)
+              Virtual link at the PVC side of an
+              SVC/PVC crossconnect, where the
+              switch is the initiator of the SPVC
+              setup.
+           spvcTarget(5)
+              Virtual link at the PVC side of an
+              SVC/PVC crossconnect, where the
+              switch is the target of the SPVC
+              setup.
+
+        An spvcInitiator is always cross-connected to
+        an svcOutgoing, and an spvcTarget is always
+        cross-connected to an svcIncoming."
+    SYNTAX   INTEGER {
+                      pvc(1),
+                      svcIncoming(2),
+                      svcOutgoing(3),
+                      spvcInitiator(4),
+                      spvcTarget(5)
+                     }
+
+-- Top-level structure of the MIB
+
+ipoaObjects        OBJECT IDENTIFIER ::= { ipoaMIB 1 }
+ipoaNotifications  OBJECT IDENTIFIER ::= { ipoaMIB 2 }
+ipoaConformance    OBJECT IDENTIFIER ::= { ipoaMIB 3 }
+
+-- MIB Objects
+
+ipoaLisTrapEnable  OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "Indicates whether ipoaLisCreate and ipoaLisDelete
+        traps should be generated by this system.
+
+        By default, this object should have the value
+        enabled(1) for systems where ATMARP Servers are
+        present and disabled(2) on systems where only
+        clients reside."
+    ::= { ipoaObjects 1 }
+
+-- The ATM Logical IP Subnet (LIS) Table
+
+ipoaLisTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaLisEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "There is one entry in this table for every Logical IP
+        Subnet (LIS) of which this system is a member.
+
+        The bulk of the objects in an ipoaLisEntry exists
+        to control ATMARP for a particular LIS.  In a PVC only
+        environment it is implementation dependent as to
+        whether this table should be supported."
+    ::= { ipoaObjects 2 }
+
+ipoaLisEntry OBJECT-TYPE
+    SYNTAX      IpoaLisEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single LIS of which this system
+        is a member.
+
+        Membership in a LIS is independent of the actual ATM
+        interfaces being used.  The ipoaLisTable defines
+        all LISs that a system is a member of.  The ipAddrTable
+        and the ipoaClientTable provides the mapping from local
+        IP address to ATM interface.  The ipoaLisIfMappingTable
+        provides the mappings between Logical IP Subnets and
+        interfaces.
+
+        The ipoaLisTable is indexed by ipoaLisSubnetAddr (IP
+        subnet address).  An entry in the ipoaLisTable should
+        exist for each ipAddrEntry that is associated with an
+        ATM related interface used for Classical IP and ARP
+        over ATM traffic.
+
+        Its ipAdEntAddr and ipAdEntNetMask when ANDed together
+        should equal the ipoaLisSubnetAddr of the corresponding
+        ipoaLisEntry."
+    INDEX       { ipoaLisSubnetAddr }
+    ::= { ipoaLisTable 1 }
+
+IpoaLisEntry ::= SEQUENCE {
+    ipoaLisSubnetAddr          IpAddress,
+    ipoaLisDefaultMtu          Integer32,
+    ipoaLisDefaultEncapsType   IpoaEncapsType,
+    ipoaLisInactivityTimer     Integer32,
+    ipoaLisMinHoldingTime      Integer32,
+    ipoaLisQDepth              Integer32,
+    ipoaLisMaxCalls            Integer32,
+    ipoaLisCacheEntryAge       Integer32,
+    ipoaLisRetries             Integer32,
+    ipoaLisTimeout             Integer32,
+    ipoaLisDefaultPeakCellRate Integer32,
+    ipoaLisActiveVcs           Gauge32,
+    ipoaLisRowStatus           RowStatus
+}
+
+ipoaLisSubnetAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP subnet address associated with this LIS."
+    ::= { ipoaLisEntry 1 }
+
+ipoaLisDefaultMtu OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The default MTU used within this LIS.  Note that the
+        actual MTU used for a VC between two members of the
+        LIS may be negotiated during connection setup and may
+        be different than this value.  The ipoaVcNegotiatedMtu
+        object indicates the actual MTU in use for a
+        particular VC."
+    DEFVAL { 9180 }
+    ::= { ipoaLisEntry 2 }
+
+ipoaLisDefaultEncapsType OBJECT-TYPE
+    SYNTAX      IpoaEncapsType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The default encapsulation to use on VCs created for
+        this LIS.  Note that the actual encapsulation type may
+        be negotiated during connection setup and may be
+        different than this value.  The
+        ipoaVcNegotiatedEncapsType object indicates the actual
+        encapsulation in use for a particular VC."
+    DEFVAL { llcSnap }
+    ::= { ipoaLisEntry 3 }
+
+ipoaLisInactivityTimer OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The time, in seconds, before a call established for an
+        ipNetToMediaEntry on a client will timeout due to no
+        traffic being passed on the VC.  A value of 0 implies
+        no time out."
+    REFERENCE
+        "RFC 1755, Sec. 3.4 VC Teardown"
+    DEFVAL      { 1200 }
+    ::= { ipoaLisEntry 4 }
+
+ipoaLisMinHoldingTime OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The minimum amount of time, in seconds, that a call
+        will remain open.  If 0 then ipoaInactivityTimer will
+        completely determine when a call is terminated."
+    REFERENCE
+        "RFC 1755, Sec. 3.4 VC Teardown"
+    DEFVAL      { 60 }
+    ::= { ipoaLisEntry 5 }
+
+ipoaLisQDepth OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    UNITS       "packets"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of outstanding requests that are
+         allowed while waiting for ATMARP replies and
+         InATMARP replies for this LIS."
+    DEFVAL      { 1 }
+    ::= { ipoaLisEntry 6 }
+
+ipoaLisMaxCalls OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of SVCs that can be established
+        simultaneously for this LIS."
+    DEFVAL      { 500 }
+    ::= { ipoaLisEntry 7 }
+
+ipoaLisCacheEntryAge OBJECT-TYPE
+    SYNTAX      Integer32 (60..1200)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The time, in seconds, before an ipNetToMediaEntry will
+        age out of the table.  Note that the default value will
+        be different for a client and a server.  An ATMARP
+        Server should use a default of 1200 and a client should
+        use 900."
+    DEFVAL      { 900 }
+    ::= { ipoaLisEntry 8 }
+
+ipoaLisRetries OBJECT-TYPE
+    SYNTAX      Integer32 (0..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of times the ATMARP request will be retried
+        when no response is received in the timeout interval
+        indicated by ipoaLisTimeout."
+    DEFVAL      { 2 }
+    ::= { ipoaLisEntry 9 }
+
+ipoaLisTimeout OBJECT-TYPE
+    SYNTAX      Integer32 (1..60)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The time to wait, in seconds, before retransmission
+        of an ARP request."
+    DEFVAL      { 10 }
+    ::= { ipoaLisEntry 10 }
+
+ipoaLisDefaultPeakCellRate OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "This object is the signalling parameter that
+         should be used when setting up all best effort
+         VCCs (Virtual Channel Connections).
+         This parameter applies to the forward and
+         backward direction on a per best effort VCC basis.
+         A value of zero implies that no configured default
+         exists and that local policy should be used to
+         determine the actual default to used during
+         call setup.  ATM Signaling Support for IP over ATM
+         (RFC 1755) recommends 1/10th of the ATM interface's
+         speed."
+    ::= { ipoaLisEntry 11 }
+
+ipoaLisActiveVcs OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of active SVCs for this LIS."
+    ::= { ipoaLisEntry 12 }
+
+ipoaLisRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the ipoaLisTable.
+
+        When the ipoaLisRowStatus deleted (by setting this
+        object to destroy(6)), this has the side-effect of
+        removing all entries from the ipNetToMediaTable that
+        are associated with this LIS (in other words, it
+        flushes the entity's ATMARP cache).  It also removes
+        the ipoaVcTable entries that were associated with those
+        ipNetToMediaTable entries.  Destroying the row also
+
+        removes the corresponding entries in the
+        ipoaArpSrvrTable, ipoaArpClientTable,
+        ipoaLisIfMappingTable, and ipoaArpRemoteSrvrTable.
+
+        Entries in both the ipNetToMediaTable and the
+        ipoaVcTable that are associated with a
+        ipoaConfigPvcEntry are not affected by changes to
+        ipoaLisRowStatus."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for Version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { ipoaLisEntry 13 }
+
+-- The ATM Logical IP Subnet Interface Mapping Table
+
+ipoaLisIfMappingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaLisIfMappingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "There is one entry in this table for every combination
+         of ipoaLisEntry and IP over ATM interface."
+    ::= { ipoaObjects 3 }
+
+ipoaLisIfMappingEntry OBJECT-TYPE
+    SYNTAX      IpoaLisIfMappingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines an entry in the ipoaLisIfMappingTable."
+    INDEX  { ipoaLisSubnetAddr, ipoaLisIfMappingIfIndex }
+    ::= { ipoaLisIfMappingTable 1 }
+
+IpoaLisIfMappingEntry ::= SEQUENCE {
+    ipoaLisIfMappingIfIndex   InterfaceIndex,
+    ipoaLisIfMappingRowStatus RowStatus
+}
+
+ipoaLisIfMappingIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ipAdEntIfIndex object from an ipAddrEntry
+         is used as an index to this table when its
+         ipAdEntAddr is in the subnet implied by
+         ipoaLisSubnetAddr."
+    ::= { ipoaLisIfMappingEntry 1 }
+
+ipoaLisIfMappingRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the ipoaLisIfMappingTable."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for Version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { ipoaLisIfMappingEntry 2 }
+
+-- The ATMARP Client Table
+
+ipoaArpClientTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaArpClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ATMARP clients running on this system."
+    ::= { ipoaObjects 4 }
+
+ipoaArpClientEntry OBJECT-TYPE
+    SYNTAX      IpoaArpClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single ATMARP Client.  Clients
+        can be started and stopped by adding and removing
+        entries from this table.  An entry in the
+        ipoaArpClientTable has a corresponding entry in the
+        ipAddrTable.  Both are indexed by ipAdEntAddr.
+        The ifIndex and subnet mask of a client entry are the
+        ipAddrEntry's ipAdEntIfIndex and ipAdEntNetMask,
+        respectively.
+
+        Note that adding and removing entries from this table
+        may have the same effect on the corresponding
+        ipAddrTable entry.  Row creation of an entry in this
+        table requires that either the corresponding ipAddrTable
+        entry exists or that ipAdEntIfIndex and ipAdEntNetMask
+        be specified in the creation of an ipoaArpClientEntry
+        at a minimum in order to create the corresponding
+        ipAddrEntry.  Specification of ipAdEntBcastAddr and
+        ipAdEntReasmMaxSize to complete an ipAddrEntry is
+        implementation dependent.
+
+        Whether a corresponding ipAddrEntry is deleted during
+        the deletion of an ipoaArpClientEntry is considered
+        implementation dependent."
+    INDEX       { ipAdEntAddr }
+    ::= { ipoaArpClientTable 1 }
+
+IpoaArpClientEntry ::= SEQUENCE {
+    ipoaArpClientAtmAddr             IpoaAtmAddr,
+    ipoaArpClientSrvrInUse           IpoaAtmAddr,
+    ipoaArpClientInArpInReqs         Counter32,
+    ipoaArpClientInArpOutReqs        Counter32,
+    ipoaArpClientInArpInReplies      Counter32,
+    ipoaArpClientInArpOutReplies     Counter32,
+    ipoaArpClientInArpInvalidInReqs  Counter32,
+    ipoaArpClientInArpInvalidOutReqs Counter32,
+    ipoaArpClientArpInReqs           Counter32,
+    ipoaArpClientArpOutReqs          Counter32,
+    ipoaArpClientArpInReplies        Counter32,
+    ipoaArpClientArpOutReplies       Counter32,
+    ipoaArpClientArpInNaks           Counter32,
+    ipoaArpClientArpOutNaks          Counter32,
+    ipoaArpClientArpUnknownOps       Counter32,
+    ipoaArpClientArpNoSrvrResps      Counter32,
+    ipoaArpClientRowStatus           RowStatus
+}
+
+ipoaArpClientAtmAddr OBJECT-TYPE
+    SYNTAX      IpoaAtmAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The ATM address of the client."
+    ::= { ipoaArpClientEntry 1 }
+
+ipoaArpClientSrvrInUse OBJECT-TYPE
+    SYNTAX      IpoaAtmAddr
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The ATM address of the ATMARP Server,
+        ipoaArpRemoteSrvrAtmAddr, in use by this client.  A
+        zero length octet string implies that communication
+        with a Remote ATMARP Server is not in effect."
+    DEFVAL { ''H }
+    ::= { ipoaArpClientEntry 2 }
+
+ipoaArpClientInArpInReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP requests received by this
+        client."
+    ::= { ipoaArpClientEntry 3 }
+
+ipoaArpClientInArpOutReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP requests sent by this client."
+    ::= { ipoaArpClientEntry 4 }
+
+ipoaArpClientInArpInReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP replies received by this
+        client."
+    ::= { ipoaArpClientEntry 5 }
+
+ipoaArpClientInArpOutReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of InATMARP replies sent by this client."
+    ::= { ipoaArpClientEntry 6 }
+
+ipoaArpClientInArpInvalidInReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times that this client detected an
+        invalid InATMARP request."
+    ::= { ipoaArpClientEntry 7 }
+
+ipoaArpClientInArpInvalidOutReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times that this client did not
+        receive an InATMARP reply."
+    ::= { ipoaArpClientEntry 8 }
+
+ipoaArpClientArpInReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of ATMARP requests received by this
+        client."
+    ::= { ipoaArpClientEntry 9 }
+
+ipoaArpClientArpOutReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of ATMARP requests sent by this client."
+    ::= { ipoaArpClientEntry 10 }
+
+ipoaArpClientArpInReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of ATMARP replies received by this
+        client."
+    ::= { ipoaArpClientEntry 11 }
+
+ipoaArpClientArpOutReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of ATMARP replies sent by this client."
+    ::= { ipoaArpClientEntry 12 }
+
+ipoaArpClientArpInNaks OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of negative ATMARP replies
+         received by this client."
+    ::= { ipoaArpClientEntry 13 }
+
+ipoaArpClientArpOutNaks OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of negative ATMARP replies sent by
+        this client.
+
+        Classic IP and ARP over ATM does not require an
+        ATMARP client to transmit an ATMARP_NAK upon
+        receipt of an ATMARP request from another ATMARP
+        client.  However, implementation experience has
+        shown that this error condition is somewhat easy
+        to create inadvertently by configuring one ATMARP
+        client with an ipoaArpRemoteSrvrTable entry
+        containing an ipoaArpRemoteSrvrAtmAddr value which
+        is the ATM address of another ATMARP client-only
+        system.
+
+        If an ATMARP client supports the transmission of
+        ATMARP_NAKs, then it should increment
+        ipoaArpClientArpOutNaks each time it transmits
+        an ATMARP_NAK.  Otherwise, support of this
+        object is considered optional."
+    ::= { ipoaArpClientEntry 14 }
+
+ipoaArpClientArpUnknownOps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times that this client received
+         an ATMARP message with an operation code for which
+         it is not coded to support."
+    ::= { ipoaArpClientEntry 15 }
+
+ipoaArpClientArpNoSrvrResps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times this client failed to receive
+         a response from a ATMARP Server within the
+         ipoaLisTimeout value for ipoaLisRetries times.
+         This may imply that the client will re-elect a
+         new primary ATMARP Server for this LIS from the
+         ipoaArpRemoteSrvrTable."
+    ::= { ipoaArpClientEntry 16 }
+
+ipoaArpClientRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and
+        deleted from the ipoaArpClientTable."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for Version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { ipoaArpClientEntry 17 }
+
+-- The ATMARP Server Table
+
+ipoaArpSrvrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaArpSrvrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ATMARP Servers running on this system."
+    ::= { ipoaObjects 5 }
+
+ipoaArpSrvrEntry OBJECT-TYPE
+    SYNTAX      IpoaArpSrvrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about an ATMARP Server within a LIS.  An
+        entry in this table has two indexes: first ipAdEntAddr,
+        which is the IP address that this system uses as a
+        member of the LIS, and then ipoaArpSrvrAddr, which is
+        the ATM address of the ATMARP Server.
+
+        Entries may be created by a management application
+        using the ipoaArpSrvrRowStatus object.  Entries in this
+        table may also be created by the system and not by a
+        management application, for example via ILMI.
+
+        Entries in this table may be deleted by setting the
+        ipoaArpSrvrRowStatus object to 'destroy(6)'.  This
+        includes entries that were added by the system and not
+        by a management application."
+    INDEX  { ipAdEntAddr, ipoaArpSrvrAddr }
+    ::= { ipoaArpSrvrTable 1 }
+
+IpoaArpSrvrEntry ::= SEQUENCE {
+    ipoaArpSrvrAddr                 IpoaAtmAddr,
+    ipoaArpSrvrLis                  IpAddress,
+    ipoaArpSrvrInArpInReqs          Counter32,
+    ipoaArpSrvrInArpOutReqs         Counter32,
+    ipoaArpSrvrInArpInReplies       Counter32,
+    ipoaArpSrvrInArpOutReplies      Counter32,
+    ipoaArpSrvrInArpInvalidInReqs   Counter32,
+    ipoaArpSrvrInArpInvalidOutReqs  Counter32,
+    ipoaArpSrvrArpInReqs            Counter32,
+    ipoaArpSrvrArpOutReplies        Counter32,
+    ipoaArpSrvrArpOutNaks           Counter32,
+    ipoaArpSrvrArpDupIpAddrs        Counter32,
+    ipoaArpSrvrArpUnknownOps        Counter32,
+    ipoaArpSrvrRowStatus            RowStatus
+}
+
+ipoaArpSrvrAddr OBJECT-TYPE
+    SYNTAX      IpoaAtmAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ATM address of the ATMARP Server."
+    ::= { ipoaArpSrvrEntry 1 }
+
+ipoaArpSrvrLis OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The subnet address that identifies the LIS with
+        which this server is associated."
+    ::= { ipoaArpSrvrEntry 2 }
+
+ipoaArpSrvrInArpInReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP requests received by this
+        ATMARP Server."
+    ::= { ipoaArpSrvrEntry 3 }
+
+ipoaArpSrvrInArpOutReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP requests sent by this ATMARP
+        Server."
+    ::= { ipoaArpSrvrEntry 4 }
+
+ipoaArpSrvrInArpInReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP replies received by this
+        ATMARP Server."
+    ::= { ipoaArpSrvrEntry 5 }
+
+ipoaArpSrvrInArpOutReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of InATMARP replies sent by this ATMARP
+        Server."
+    ::= { ipoaArpSrvrEntry 6 }
+
+ipoaArpSrvrInArpInvalidInReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of invalid InATMARP requests received by
+         this ATMARP Server."
+    ::= { ipoaArpSrvrEntry 7 }
+
+ipoaArpSrvrInArpInvalidOutReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times that this server did not receive
+         an InATMARP reply."
+    ::= { ipoaArpSrvrEntry 8 }
+
+ipoaArpSrvrArpInReqs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of ATMARP requests received by this
+        ATMARP Server."
+    ::= { ipoaArpSrvrEntry 9 }
+
+ipoaArpSrvrArpOutReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of ATMARP replies sent by this ATMARP
+        Server."
+    ::= { ipoaArpSrvrEntry 10 }
+
+ipoaArpSrvrArpOutNaks OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Total number of negative ATMARP replies sent by this
+         ATMARP Server."
+    ::= { ipoaArpSrvrEntry 11 }
+
+ipoaArpSrvrArpDupIpAddrs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times that a duplicate IP address was
+         detected by this ATMARP Server."
+    ::= { ipoaArpSrvrEntry 12 }
+
+ipoaArpSrvrArpUnknownOps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times that this ATMARP Server received
+         an ATMARP message with an operation code for which it
+         is not coded to support."
+    ::= { ipoaArpSrvrEntry 13 }
+
+ipoaArpSrvrRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        from the ipoaArpSrvrTable."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for Version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { ipoaArpSrvrEntry 14 }
+
+-- The Remote ATMARP Server Table
+
+ipoaArpRemoteSrvrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaArpRemoteSrvrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of non-local ATMARP Servers associated with a
+        LIS.  An entry in this table has three indexes: first
+        the ipoaLisSubnetAddr of the LIS for which the
+        corresponding ATMARP Server provides ATMARP services,
+        then the ipoaArpRemoteSrvrAtmAddr, which is the ATM
+        address of the remote ATMARP Server, and finally the
+        ifIndex of the interface on which the VC to the ATMARP
+        Remote Server will be opened.  An ifIndex value of 0
+        should be used when a single VC is to be shared for
+        ATMARP purposes by multiple interfaces."
+    ::= { ipoaObjects 6 }
+
+ipoaArpRemoteSrvrEntry OBJECT-TYPE
+    SYNTAX      IpoaArpRemoteSrvrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about one non-local ATMARP Server."
+    INDEX  { ipoaLisSubnetAddr, ipoaArpRemoteSrvrAtmAddr,
+             ipoaArpRemoteSrvrIfIndex }
+    ::= { ipoaArpRemoteSrvrTable 1 }
+
+IpoaArpRemoteSrvrEntry ::= SEQUENCE {
+    ipoaArpRemoteSrvrAtmAddr      IpoaAtmAddr,
+    ipoaArpRemoteSrvrRowStatus    RowStatus,
+    ipoaArpRemoteSrvrIfIndex      InterfaceIndexOrZero,
+    ipoaArpRemoteSrvrIpAddr       IpAddress,
+    ipoaArpRemoteSrvrAdminStatus  INTEGER,
+    ipoaArpRemoteSrvrOperStatus   INTEGER
+}
+
+ipoaArpRemoteSrvrAtmAddr OBJECT-TYPE
+    SYNTAX      IpoaAtmAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ATM address of the remote ATMARP Server."
+    ::= { ipoaArpRemoteSrvrEntry 1 }
+
+ipoaArpRemoteSrvrRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        from the ipoaArpRemoteSrvrTable.
+
+        Deleting an ipoaArpRemoteSrvrEntry (by setting this
+        object to destroy(6)) may affect ipoaArpClientTable
+        entries.  The object ipoaArpClientSrvrInUse in an
+        ipoaArpClientSrvrEntry may contain the ATM address
+        of an ATMARP Remote Server whose entry in the
+        ipoaArpRemoteSrvrTable is being removed.  In this
+        case, any corresponding ipoaArpClientSrvrInUse
+        objects should be at a minimum invalidated by
+        setting their values to that of a zero length
+        OCTET STRING.
+
+        The value of ipoaArpRemoteSrvrOperStatus should be
+        consistent with that of ipoaArpRemoteSrvrRowStatus.
+        For example, successfully setting the value of
+        this object to notInService(2) after its being in
+        the up(1) state should result in
+        ipoaArpRemoteSrvrOperStatus being set to down(2)
+        if currently up(1)."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for Version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { ipoaArpRemoteSrvrEntry 2 }
+
+ipoaArpRemoteSrvrIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ifIndex of the interface that the VC to the
+         Remote ATMARP Server is associated with."
+    ::= { ipoaArpRemoteSrvrEntry 3 }
+
+ipoaArpRemoteSrvrIpAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The IP Address of the Remote ATMARP Server.  A
+        value of 0.0.0.0 implies that this address isn't
+        known."
+    DEFVAL { '00000000'H }
+    ::= { ipoaArpRemoteSrvrEntry 4 }
+
+ipoaArpRemoteSrvrAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+
+              up(1),  -- use this ATMARP Server
+              down(2) -- stop using this ATMARP Server
+            }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The desired state for use of the ATMARP Server
+         represented by an entry in this table.
+         ipoaArpRemoteSrvrAdminStatus values:
+
+         up(1)   - Attempt to activate use of the
+                   ATMARP Server represented by this
+                   entry in the ipoaArpRemoteSrvrTable.
+         down(2) - Deactivate use of this ATMARP
+                   Server.
+
+         When a managed system creates an entry in this
+         table ipoaArpRemoteSrvrAdminStatus and
+         ipoaArpRemoteSrvrOperStatus are initialized as
+         down(2) by default."
+    DEFVAL { down }
+    ::= { ipoaArpRemoteSrvrEntry 5 }
+
+ipoaArpRemoteSrvrOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+               up(1),  -- eligible for use
+               down(2) -- not eligible for use
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current operational state for use of a Remote
+         ATMARP Server.  An up(1) entry has a VC
+         established to the respective Remote ATMARP
+         Server:
+
+         up(1)  - A VC exists to Remote ATMARP Server
+                  whose IP Address is stored in
+                  ipoaArpRemoteSrvrIpAddr.  This VC can
+                  be determined by searching the
+                  ipoaVcTable using
+                  ipoaArpRemoteSrvrIfIndex (if not 0,
+                  otherwise ignore ipNetToMediaIfIndex
+                  index) and ipoaArpRemoteSrvrIpAddr.
+                  An ipoaArpClientEntry should exist
+                  with its ipoaArpClientSrvrInUse
+                  object having the same value as
+                  ipoaArpRemoteSrvrAtmAddr.
+
+        down(2) - Entry exists without an active VC to
+                  the Remote ATMARP Server.
+
+        Transition from up(1) to down(2)
+        status may affect ipoaArpClientTable entries.
+        The object ipoaArpClientSrvrInUse in an
+        ipoaArpClientSrvrEntry may contain the ATM address
+        of an ATMARP Remote Server whose entry in the
+        ipoaArpRemoteSrvrTable is being deactivated.  In
+        this case, any corresponding ipoaArpClientSrvrInUse
+        objects should be at a minimum invalidated by
+        setting their values to that of a zero length
+        OCTET STRING.
+
+        If ipoaArpRemoteSrvrAdminStatus is down(2) then
+        ipoaArpRemoteSrvrOperStatus should be down(2).
+        If ipoaArpRemoteSrvrAdminStatus is changed to
+        up(1) then ipoaArpRemoteSrvrOperStatus should
+        change to up(1) if the Remote ATMARP Server
+        entry can be activated."
+    DEFVAL { down }
+    ::= { ipoaArpRemoteSrvrEntry 6 }
+
+-- The ATM VC Table
+
+ipoaVcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaVcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A system that supports IP over ATM is an IP system and
+        therefore MUST support all of the appropriate tables in
+        the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233),
+        the IP-MIB (RFC 2011), the TCP-MIB (RFC 2012), and
+        the UDP-MIB (RFC 2013).  This includes the
+        ipNetToMediaTable (the ARP cache) that is defined
+        within the IP-MIB (RFC 2011).  The ipoaVcTable
+        keeps a set of VCs for each entry in the ARP cache
+        that was put there by an IP over ATM system acting
+        as either a host or server.  The ipoaVcTable doesn't
+        augment the ipNetToMediaTable (ARP Cache) since the
+        the correspondence between tables is not necessarily
+        one-to-one.
+
+        An ipNetToMediaPhysAddress object should contain the
+        content as defined by the IpoaAtmAddr textual
+        convention when used to hold an IPOA-MIB ATM Address."
+    ::= { ipoaObjects 7 }
+
+ipoaVcEntry OBJECT-TYPE
+    SYNTAX      IpoaVcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A VC (permanent or switched) that this host or server
+        has opened with another member of a LIS.  Additional
+        information can be determined about the VC from the
+        ATM-MIB.
+
+        Entries in this table cannot be created by management
+        applications.
+
+        In an SVC environment, an entry is automatically added
+        by the system as the result of ATMARP processing.
+
+        In a PVC environment, an entry is automatically added
+        to this table when an entry is created in the
+        ipoaConfigPvcTable and the IP Address at the remote
+        end of the PVC is discovered using InATMARP.  An
+        entry also is added to the ipNetToMediaTable."
+    INDEX       { ipNetToMediaIfIndex,
+                  ipNetToMediaNetAddress,
+                  ipoaVcVpi,
+                  ipoaVcVci
+                }
+    ::= { ipoaVcTable 1 }
+
+IpoaVcEntry ::= SEQUENCE {
+    ipoaVcVpi                  IpoaVpiInteger,
+    ipoaVcVci                  IpoaVciInteger,
+    ipoaVcType                 IpoaAtmConnKind,
+    ipoaVcNegotiatedEncapsType IpoaEncapsType,
+    ipoaVcNegotiatedMtu        Integer32 }
+
+ipoaVcVpi OBJECT-TYPE
+    SYNTAX      IpoaVpiInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The VPI value for the Virtual Circuit."
+    ::= { ipoaVcEntry 1 }
+
+ipoaVcVci OBJECT-TYPE
+    SYNTAX      IpoaVciInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The VCI value for the Virtual Circuit."
+    ::= { ipoaVcEntry 2 }
+
+ipoaVcType OBJECT-TYPE
+    SYNTAX      IpoaAtmConnKind
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of the Virtual Circuit."
+    ::= { ipoaVcEntry 3 }
+
+ipoaVcNegotiatedEncapsType OBJECT-TYPE
+    SYNTAX      IpoaEncapsType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The encapsulation type used when communicating over
+        this circuit."
+    ::= { ipoaVcEntry 4 }
+
+ipoaVcNegotiatedMtu OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MTU used when communicating over this circuit."
+    ::= { ipoaVcEntry 5 }
+
+-- The ATM Config PVC Table
+
+ipoaConfigPvcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpoaConfigPvcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table MUST be supported when PVCs are intended to
+        be supported in order to enable the setup of PVCs for
+        use by IP."
+    ::= { ipoaObjects 8 }
+
+ipoaConfigPvcEntry OBJECT-TYPE
+    SYNTAX      IpoaConfigPvcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a single PVC that exists at this host for
+        use by IP."
+    INDEX       { ipoaConfigPvcIfIndex,
+                  ipoaConfigPvcVpi,
+                  ipoaConfigPvcVci
+                }
+    ::= { ipoaConfigPvcTable 1 }
+
+IpoaConfigPvcEntry ::= SEQUENCE {
+    ipoaConfigPvcIfIndex              InterfaceIndex,
+    ipoaConfigPvcVpi                  IpoaVpiInteger,
+    ipoaConfigPvcVci                  IpoaVciInteger,
+    ipoaConfigPvcDefaultMtu           Integer32,
+    ipoaConfigPvcRowStatus            RowStatus }
+
+ipoaConfigPvcIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The ifIndex of the ATM Interface that this PVC
+         is associated with."
+    ::= { ipoaConfigPvcEntry 1 }
+
+ipoaConfigPvcVpi OBJECT-TYPE
+    SYNTAX      IpoaVpiInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The VPI value for the Virtual Circuit."
+    ::= { ipoaConfigPvcEntry 2 }
+
+ipoaConfigPvcVci OBJECT-TYPE
+    SYNTAX      IpoaVciInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The VCI value for the Virtual Circuit."
+    ::= { ipoaConfigPvcEntry 3 }
+
+ipoaConfigPvcDefaultMtu OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "Classical IP and ARP over ATM allows use of
+       other MTU values for PVCs but considers how a
+       value other than 9180 could be selected to be out
+       of scope.  ipoaConfigPvcDefaultMtu can be used to
+       configure the MTU to be used for the PVC.
+
+       Both ends MUST have the same value configured."
+    DEFVAL { 9180 }
+    ::= { ipoaConfigPvcEntry 4 }
+
+ipoaConfigPvcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This object allows rows to be created and deleted in
+       the ipoaConfigPvcTable.  Creation of an entry in this
+       table should eventually result in the creation of an
+       ipNetToMediaEntry and a corresponding ipoaVcEntry
+       after InATMARP has determined the destination address
+       of the remote system that the PVC is connected to.
+       Setting this object to destroy(6) should remove the
+       corresponding ipNetToMediaTable and ipoaVcTable
+       entries."
+   REFERENCE
+       "RFC 1903, 'Textual Conventions for Version 2 of the
+       Simple Network Management Protocol (SNMPv2).'"
+   ::= { ipoaConfigPvcEntry 5 }
+
+-- Notifications
+
+ipoaTrapPrefix  OBJECT IDENTIFIER ::= { ipoaNotifications 0 }
+
+ipoaMtuExceeded NOTIFICATION-TYPE
+    OBJECTS {
+        ipoaVcNegotiatedMtu
+    }
+    STATUS  current
+    DESCRIPTION
+        "A frame was received that exceeds the negotiated
+        MTU size.  The VPI and VCI of the VC for which this
+        condition was detected can be determined from the
+        index values for ipoaVcNegotiatedMtu.  In addition,
+        the ifIndex and IP Address can be determined as
+        well (refer to the ipoaVcTable)."
+    ::= { ipoaTrapPrefix 1 }
+
+ipoaDuplicateIpAddress NOTIFICATION-TYPE
+    OBJECTS {
+        ipNetToMediaIfIndex,
+        ipNetToMediaNetAddress,
+        ipNetToMediaPhysAddress,
+        ipNetToMediaPhysAddress
+
+    }
+    STATUS  current
+    DESCRIPTION
+        "The ATMARP Server has detected more than one ATM end
+        point attempting to associate the same IP address with
+        different ATM addresses."
+    ::= { ipoaTrapPrefix 2 }
+
+ipoaLisCreate NOTIFICATION-TYPE
+    OBJECTS {
+        ipoaLisSubnetAddr
+    }
+    STATUS  current
+    DESCRIPTION
+        "Generation of this trap occurs when an ipoaLisEntry is
+        created while the ipoaLisTrapEnable.0 object has the
+        value enabled(1)."
+    ::= { ipoaTrapPrefix 3 }
+
+ipoaLisDelete NOTIFICATION-TYPE
+    OBJECTS {
+        ipoaLisSubnetAddr
+    }
+    STATUS  current
+    DESCRIPTION
+        "Generation of this trap occurs when an ipoaLisEntry is
+        deleted while the ipoaLisTrapEnable.0 object has the
+        value enabled(1)."
+    ::= { ipoaTrapPrefix 4 }
+
+-- Conformance Definitions
+
+ipoaGroups      OBJECT IDENTIFIER ::= { ipoaConformance 1 }
+
+ipoaCompliances OBJECT IDENTIFIER ::= { ipoaConformance 2 }
+
+-- compliance statements
+
+ipoaCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for agents that support the
+        IPOA-MIB."
+    MODULE -- this module
+        MANDATORY-GROUPS { ipoaGeneralGroup,
+                           ipoaBasicNotificationsGroup
+              }
+        GROUP ipoaClientGroup
+        DESCRIPTION
+            "This group is mandatory for all hosts where IP
+            over ATM client support is present."
+        GROUP ipoaSrvrGroup
+        DESCRIPTION
+            "This group is mandatory for all hosts where ATMARP
+            Servers are present."
+        GROUP ipoaSrvrNotificationsGroup
+        DESCRIPTION
+            "This group is mandatory for all hosts where ATMARP
+            Servers are present."
+        GROUP ipoaLisNotificationsGroup
+        DESCRIPTION
+            "This group is mandatory for all hosts where
+            ATMARP client only support is present and
+            ipoaLisTrapEnable is allowed to be set to
+            enabled(1)."
+        GROUP ipoaLisTableGroup
+        DESCRIPTION
+            "This group is mandatory for all entities which
+            support IP over ATM SVCs.  Support of objects in
+            this group by IP over ATM clients which only
+            support IP over ATM PVCs is optional."
+
+        OBJECT ipoaLisDefaultMtu
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to allow the user
+            to change the default MTU from the value 9180.
+
+            The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisDefaultEncapsType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to allow the user to
+            specify the default encapsulation type for the
+            LIS.
+
+            The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisInactivityTimer
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisMinHoldingTime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisQDepth
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisMaxCalls
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisCacheEntryAge
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisRetries
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to allow the user
+            to change the default number of times an ATMARP
+            request will be retried when no response is
+            received from the default of 2.
+
+            The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisTimeout
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to allow the user
+
+            to change the default retransmission time from
+            the default of 10 seconds.
+
+            The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisDefaultPeakCellRate
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Implementations that do not support IP over
+            ATM SVC usage are not required to allow the
+            user to specify a best effort default peak cell
+            rate since typically the ipoaLisTable won't
+            exist.
+
+            The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisIfMappingRowStatus
+        SYNTAX   INTEGER {
+                           active(1) -- subset of RowStatus
+                         }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object, and only one
+            of the six enumerated values for the
+            RowStatus textual convention need be
+            supported, specifically: active(1)."
+
+        OBJECT ipoaArpClientAtmAddr
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaArpSrvrLis
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaArpRemoteSrvrAdminStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security.  In this case the value of
+            this object should be up(1) when a VC
+            exists to the Remote ATMARP Server or
+            otherwise down(2), and the agent should not
+            allow a SET operation to this object."
+
+        OBJECT ipoaConfigPvcDefaultMtu
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "The agent is not required to support a SET
+            operation to this object in the absence of
+            adequate security."
+
+        OBJECT ipoaLisRowStatus
+        SYNTAX   INTEGER {
+                           active(1) -- subset of RowStatus
+                         }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required, and only one
+            of the six enumerated values for the
+            RowStatus textual convention need be
+            supported, specifically: active(1)."
+
+        OBJECT ipoaArpClientRowStatus
+        SYNTAX   INTEGER {
+                           active(1) -- subset of RowStatus
+                         }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required, and only one
+            of the six enumerated values for the
+            RowStatus textual convention need be
+            supported, specifically: active(1)."
+
+        OBJECT ipoaArpRemoteSrvrRowStatus
+        SYNTAX   INTEGER {
+                           active(1) -- subset of RowStatus
+                         }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required, and only one
+            of the six enumerated values for the
+            RowStatus textual convention need be
+            supported, specifically: active(1)."
+
+        OBJECT ipoaArpSrvrRowStatus
+        SYNTAX   INTEGER {
+                           active(1) -- subset of RowStatus
+                         }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required, and only one
+            of the six enumerated values for the
+            RowStatus textual convention need be
+            supported, specifically: active(1)."
+
+        OBJECT ipoaConfigPvcRowStatus
+        SYNTAX   INTEGER {
+                           active(1) -- subset of RowStatus
+                         }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required, and only one
+            of the six enumerated values for the
+            RowStatus textual convention need be
+            supported, specifically: active(1)."
+
+        OBJECT ipoaArpClientArpOutNaks
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "Classic IP and ARP over ATM does not require
+            an ATMARP client to transmit an ATMARP_NAK
+            upon receipt of an ATMARP request from another
+            ATMARP client.  This object should be
+            implemented when an ATMARP client supports the
+            transmission of ATMARP_NAKs."
+    ::= { ipoaCompliances 1 }
+
+-- units of conformance
+
+ipoaGeneralGroup OBJECT-GROUP
+    OBJECTS {
+        ipoaVcType,
+        ipoaVcNegotiatedEncapsType,
+        ipoaVcNegotiatedMtu,
+        ipoaConfigPvcDefaultMtu,
+        ipoaConfigPvcRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "This group is mandatory for all IP over ATM entities."
+    ::= { ipoaGroups 1 }
+
+ipoaClientGroup OBJECT-GROUP
+    OBJECTS {
+        ipoaArpClientAtmAddr,
+        ipoaArpClientSrvrInUse,
+        ipoaArpClientInArpInReqs,
+        ipoaArpClientInArpOutReqs,
+        ipoaArpClientInArpInReplies,
+        ipoaArpClientInArpOutReplies,
+        ipoaArpClientInArpInvalidInReqs,
+        ipoaArpClientInArpInvalidOutReqs,
+        ipoaArpClientArpInReqs,
+        ipoaArpClientArpOutReqs,
+        ipoaArpClientArpInReplies,
+        ipoaArpClientArpOutReplies,
+        ipoaArpClientArpInNaks,
+        ipoaArpClientArpOutNaks,
+        ipoaArpClientArpUnknownOps,
+        ipoaArpClientArpNoSrvrResps,
+        ipoaArpClientRowStatus
+      }
+    STATUS  current
+    DESCRIPTION
+        "This group is mandatory for all hosts where an IP
+        over ATM client is present."
+    ::= { ipoaGroups 2 }
+
+ipoaSrvrGroup OBJECT-GROUP
+    OBJECTS {
+        ipoaArpSrvrLis,
+        ipoaArpSrvrInArpInReqs,
+        ipoaArpSrvrInArpOutReqs,
+        ipoaArpSrvrInArpInReplies,
+        ipoaArpSrvrInArpOutReplies,
+        ipoaArpSrvrInArpInvalidInReqs,
+        ipoaArpSrvrInArpInvalidOutReqs,
+        ipoaArpSrvrArpInReqs,
+        ipoaArpSrvrArpOutReplies,
+        ipoaArpSrvrArpOutNaks,
+        ipoaArpSrvrArpDupIpAddrs,
+        ipoaArpSrvrArpUnknownOps,
+        ipoaArpSrvrRowStatus
+     }
+    STATUS  current
+    DESCRIPTION
+        "This group is mandatory for all hosts where ATMARP
+        Servers are present."
+    ::= { ipoaGroups 3 }
+
+ipoaBasicNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+          ipoaMtuExceeded
+       }
+    STATUS        current
+    DESCRIPTION
+        "The notification which an IP over ATM entity
+        is required to implement."
+    ::= { ipoaGroups 4 }
+
+ipoaSrvrNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+          ipoaDuplicateIpAddress
+       }
+    STATUS        current
+    DESCRIPTION
+            "The notification which an IP over ATM ATMARP
+            Server is required to implement."
+    ::= { ipoaGroups 5 }
+
+ipoaLisNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+          ipoaLisCreate,
+          ipoaLisDelete
+       }
+    STATUS        current
+    DESCRIPTION
+            "The LIS-related notifications which are required
+            to be implemented by an IP over ATM ATMARP server,
+            as well as by any IP over ATM client which allows
+            ipoaLisTrapEnable to be set to enabled(1)."
+    ::= { ipoaGroups 6 }
+
+ipoaLisTableGroup OBJECT-GROUP
+    OBJECTS {
+        ipoaLisTrapEnable,
+        ipoaLisSubnetAddr,
+        ipoaLisDefaultMtu,
+        ipoaLisDefaultEncapsType,
+        ipoaLisInactivityTimer,
+        ipoaLisMinHoldingTime,
+        ipoaLisQDepth,
+        ipoaLisMaxCalls,
+        ipoaLisCacheEntryAge,
+        ipoaLisRetries,
+        ipoaLisTimeout,
+        ipoaLisDefaultPeakCellRate,
+        ipoaLisActiveVcs,
+        ipoaLisRowStatus,
+        ipoaLisIfMappingRowStatus,
+        ipoaArpRemoteSrvrRowStatus,
+        ipoaArpRemoteSrvrIpAddr,
+        ipoaArpRemoteSrvrAdminStatus,
+        ipoaArpRemoteSrvrOperStatus
+    }
+    STATUS  current
+    DESCRIPTION
+        "This group is mandatory for all entities which
+        support IP over ATM SVCs.  Support of objects in
+        this group by IP over ATM clients which only
+        support IP over ATM PVCs is optional."
+    ::= { ipoaGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/IPS-AUTH-MIB.mib b/snmp_builder/mibs/IPS-AUTH-MIB.mib
new file mode 100644
index 0000000..bcc2809
--- /dev/null
+++ b/snmp_builder/mibs/IPS-AUTH-MIB.mib
@@ -0,0 +1,1156 @@
+IPS-AUTH-MIB DEFINITIONS  ::= BEGIN
+
+    IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32,
+    mib-2
+    FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION, RowStatus, AutonomousType, StorageType
+    FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+    FROM SNMPv2-CONF
+
+    SnmpAdminString
+    FROM SNMP-FRAMEWORK-MIB -- RFC 3411
+
+    AddressFamilyNumbers
+    FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
+    ;
+
+ipsAuthMibModule MODULE-IDENTITY
+    LAST-UPDATED  "200605220000Z" -- May 22, 2006
+    ORGANIZATION  "IETF IPS Working Group"
+    CONTACT-INFO
+    "
+    Mark Bakke
+    Postal: Cisco Systems, Inc
+    7900 International Drive, Suite 400
+    Bloomington, MN
+    USA 55425
+
+    E-mail: mbakke@cisco.com
+
+    James Muchow
+    Postal: Qlogic Corp.
+    6321 Bury Dr.
+    Eden Prairie, MN
+    USA 55346
+
+    E-Mail: james.muchow@qlogic.com"
+    DESCRIPTION
+        "The IP Storage Authorization MIB module.
+         Copyright (C) The Internet Society (2006).  This version of
+         this MIB module is part of RFC 4545;  see the RFC itself for
+         full legal notices."
+
+    REVISION "200605220000Z" -- May 22, 2006
+    DESCRIPTION
+        "Initial version of the IP Storage Authentication MIB module,
+        published as RFC 4545"
+::= { mib-2 141 }
+
+ipsAuthNotifications OBJECT IDENTIFIER ::= { ipsAuthMibModule 0 }
+ipsAuthObjects       OBJECT IDENTIFIER ::= { ipsAuthMibModule 1 }
+ipsAuthConformance   OBJECT IDENTIFIER ::= { ipsAuthMibModule 2 }
+
+-- Textual Conventions
+
+IpsAuthAddress ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+        "IP Storage requires the use of address information
+        that uses not only the InetAddress type defined in the
+        INET-ADDRESS-MIB, but also Fibre Channel type defined
+        in the Fibre Channel Management MIB.  Although these
+        address types are recognized in the IANA Address Family
+        Numbers MIB, the addressing mechanisms have not been
+        merged into a well-known, common type.  This data type,
+        the IpsAuthAddress, performs the merging for this MIB
+        module.
+
+        The formats of objects of this type are determined by
+        a corresponding object with syntax AddressFamilyNumbers,
+        and thus every object defined using this TC must
+        identify the object with syntax AddressFamilyNumbers
+        that specifies its type.
+
+        The syntax and semantics of this object depend on the
+        identified AddressFamilyNumbers object as follows:
+
+        AddressFamilyNumbers   this object
+        ====================   ===========
+        ipV4(1)                restricted to the same syntax and
+                               semantics as the InetAddressIPv4 TC.
+
+        ipV6(2)                restricted to the same syntax and
+                               semantics as the InetAddressIPv6 TC.
+
+        fibreChannelWWPN (22)
+        & fibreChannelWWNN(23) restricted to the same syntax and
+                               semantics as the FcNameIdOrZero TC.
+
+        Types other than the above should not be used unless
+
+        the corresponding format of the IpsAuthAddress object is
+        further specified (e.g., in a future revision of this TC)."
+    REFERENCE
+        "IANA-ADDRESS-FAMILY-NUMBERS-MIB;
+         INET-ADDRESS-MIB (RFC 4001);
+         FC-MGMT-MIB (RFC 4044)."
+    SYNTAX        OCTET STRING (SIZE(0..255))
+
+--******************************************************************
+
+ipsAuthDescriptors OBJECT IDENTIFIER ::= { ipsAuthObjects 1 }
+
+ipsAuthMethodTypes OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "Registration point for Authentication Method Types."
+    REFERENCE "RFC 3720, iSCSI Protocol Specification."
+::= { ipsAuthDescriptors 1 }
+
+ipsAuthMethodNone OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "The authoritative identifier when no authentication
+        method is used."
+    REFERENCE "RFC 3720, iSCSI Protocol Specification."
+::= { ipsAuthMethodTypes 1 }
+
+ipsAuthMethodSrp OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "The authoritative identifier when the authentication
+        method is SRP."
+    REFERENCE "RFC 3720, iSCSI Protocol Specification."
+::= { ipsAuthMethodTypes 2 }
+
+ipsAuthMethodChap OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "The authoritative identifier when the authentication
+        method is CHAP."
+    REFERENCE "RFC 3720, iSCSI Protocol Specification."
+::= { ipsAuthMethodTypes 3 }
+
+ipsAuthMethodKerberos OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "The authoritative identifier when the authentication
+        method is Kerberos."
+    REFERENCE "RFC 3720, iSCSI Protocol Specification."
+::= { ipsAuthMethodTypes 4 }
+
+--******************************************************************
+
+ipsAuthInstance OBJECT IDENTIFIER ::= { ipsAuthObjects 2 }
+
+-- Instance Attributes Table
+
+ipsAuthInstanceAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthInstanceAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of Authorization instances present on the system."
+::= { ipsAuthInstance 2 }
+
+ipsAuthInstanceAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthInstanceAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a particular Authorization instance."
+    INDEX { ipsAuthInstIndex }
+::= { ipsAuthInstanceAttributesTable 1 }
+
+IpsAuthInstanceAttributesEntry ::= SEQUENCE {
+    ipsAuthInstIndex               Unsigned32,
+    ipsAuthInstDescr               SnmpAdminString,
+    ipsAuthInstStorageType         StorageType
+}
+
+ipsAuthInstIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular authorization instance.  This index value
+        must not be modified or reused by an agent unless
+        a reboot has occurred.  An agent should attempt to
+        keep this value persistent across reboots."
+::= { ipsAuthInstanceAttributesEntry 1 }
+
+ipsAuthInstDescr OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "A character string, determined by the implementation to
+        describe the authorization instance.  When only a single
+        instance is present, this object may be set to the
+        zero-length string; with multiple authorization
+        instances, it must be set to a unique value in an
+        implementation-dependent manner to describe the purpose
+        of the respective instance.  If this is deployed in a
+        master agent with more than one subagent implementing
+        this MIB module, the master agent is responsible for
+        ensuring that this object is unique across all
+        subagents."
+::= { ipsAuthInstanceAttributesEntry 2 }
+
+ipsAuthInstStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-write objects within this
+         row.  Rows in this table are always created via an
+         external process, and may have a storage type of readOnly
+         or permanent.  Conceptual rows having the value 'permanent'
+         need not allow write access to any columnar objects in
+         the row.
+
+         If this object has the value 'volatile', modifications
+         to read-write objects in this row are not persistent
+         across reboots.  If this object has the value
+         'nonVolatile', modifications to objects in this row
+         are persistent.
+
+         An implementation may choose to allow this object
+         to be set to either 'nonVolatile' or 'volatile',
+         allowing the management application to choose this
+         behavior."
+    DEFVAL        { volatile }
+::= { ipsAuthInstanceAttributesEntry 3 }
+
+ipsAuthIdentity OBJECT IDENTIFIER ::= { ipsAuthObjects 3 }
+
+-- User Identity Attributes Table
+
+ipsAuthIdentAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthIdentAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of user identities, each belonging to a
+        particular ipsAuthInstance."
+::= { ipsAuthIdentity 1 }
+
+ipsAuthIdentAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthIdentAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        describing a user identity within an authorization
+        instance on this node."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex }
+::= { ipsAuthIdentAttributesTable  1 }
+
+IpsAuthIdentAttributesEntry ::= SEQUENCE {
+    ipsAuthIdentIndex              Unsigned32,
+    ipsAuthIdentDescription        SnmpAdminString,
+    ipsAuthIdentRowStatus          RowStatus,
+    ipsAuthIdentStorageType        StorageType
+}
+
+ipsAuthIdentIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular identity instance within an authorization
+        instance present on the node.  This index value
+        must not be modified or reused by an agent unless
+        a reboot has occurred.  An agent should attempt to
+        keep this value persistent across reboots."
+::= { ipsAuthIdentAttributesEntry 1 }
+
+ipsAuthIdentDescription OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A character string describing this particular identity."
+::= { ipsAuthIdentAttributesEntry 2 }
+
+ipsAuthIdentRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The value of
+        ipsAuthIdentDescription may be set while
+        ipsAuthIdentRowStatus is 'active'."
+::= { ipsAuthIdentAttributesEntry 3 }
+
+ipsAuthIdentStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthIdentAttributesEntry 4 }
+
+ipsAuthIdentityName OBJECT IDENTIFIER ::= { ipsAuthObjects 4 }
+
+-- User Initiator Name Attributes Table
+
+ipsAuthIdentNameAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthIdentNameAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of unique names that can be used to positively
+        identify a particular user identity."
+::= { ipsAuthIdentityName 1 }
+
+ipsAuthIdentNameAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthIdentNameAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a unique identity name, which can be used
+        to identify a user identity within a particular
+        authorization instance."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex,
+            ipsAuthIdentNameIndex }
+::= { ipsAuthIdentNameAttributesTable  1 }
+
+IpsAuthIdentNameAttributesEntry ::= SEQUENCE {
+    ipsAuthIdentNameIndex          Unsigned32,
+    ipsAuthIdentName               SnmpAdminString,
+    ipsAuthIdentNameRowStatus      RowStatus,
+    ipsAuthIdentNameStorageType    StorageType
+}
+
+ipsAuthIdentNameIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular identity name instance within an
+        ipsAuthIdentity within an authorization instance.
+        This index value must not be modified or reused by
+        an agent unless a reboot has occurred.  An agent
+        should attempt to keep this value persistent across
+        reboots."
+::= { ipsAuthIdentNameAttributesEntry 1 }
+
+ipsAuthIdentName OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A character string that is the unique name of an
+        identity that may be used to identify this ipsAuthIdent
+        entry."
+::= { ipsAuthIdentNameAttributesEntry 2 }
+
+ipsAuthIdentNameRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The value of
+        ipsAuthIdentName may be set when this value is 'active'."
+::= { ipsAuthIdentNameAttributesEntry 3 }
+
+ipsAuthIdentNameStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthIdentNameAttributesEntry 4 }
+
+ipsAuthIdentityAddress OBJECT IDENTIFIER ::= { ipsAuthObjects 5 }
+
+-- User Initiator Address Attributes Table
+
+ipsAuthIdentAddrAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthIdentAddrAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of address ranges that are allowed to serve
+        as the endpoint addresses of a particular identity.
+        An address range includes a starting and ending address
+        and an optional netmask, and an address type indicator,
+        which can specify whether the address is IPv4, IPv6,
+        FC-WWPN, or FC-WWNN."
+::= { ipsAuthIdentityAddress 1 }
+
+ipsAuthIdentAddrAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthIdentAddrAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to an address range that is used as part
+        of the authorization of an identity
+        within an authorization instance on this node."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex,
+            ipsAuthIdentAddrIndex }
+::= { ipsAuthIdentAddrAttributesTable  1 }
+
+IpsAuthIdentAddrAttributesEntry ::= SEQUENCE {
+    ipsAuthIdentAddrIndex          Unsigned32,
+    ipsAuthIdentAddrType           AddressFamilyNumbers,
+    ipsAuthIdentAddrStart          IpsAuthAddress,
+    ipsAuthIdentAddrEnd            IpsAuthAddress,
+    ipsAuthIdentAddrRowStatus      RowStatus,
+    ipsAuthIdentAddrStorageType    StorageType
+}
+
+ipsAuthIdentAddrIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular ipsAuthIdentAddress instance within an
+        ipsAuthIdentity within an authorization instance
+        present on the node.
+        This index value must not be modified or reused by
+        an agent unless a reboot has occurred.  An agent
+        should attempt to keep this value persistent across
+        reboots."
+::= { ipsAuthIdentAddrAttributesEntry 1 }
+
+ipsAuthIdentAddrType OBJECT-TYPE
+    SYNTAX        AddressFamilyNumbers
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The address types used in the ipsAuthIdentAddrStart
+        and ipsAuthAddrEnd objects.  This type is taken
+        from the IANA address family types."
+::= { ipsAuthIdentAddrAttributesEntry 2 }
+
+ipsAuthIdentAddrStart OBJECT-TYPE
+    SYNTAX        IpsAuthAddress
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The starting address of the allowed address range.
+        The format of this object is determined by
+        ipsAuthIdentAddrType."
+::= { ipsAuthIdentAddrAttributesEntry 3 }
+
+ipsAuthIdentAddrEnd OBJECT-TYPE
+    SYNTAX        IpsAuthAddress
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The ending address of the allowed address range.
+        If the ipsAuthIdentAddrEntry specifies a single
+        address, this shall match the ipsAuthIdentAddrStart.
+        The format of this object is determined by
+        ipsAuthIdentAddrType."
+::= { ipsAuthIdentAddrAttributesEntry 4 }
+
+ipsAuthIdentAddrRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The values of
+        ipsAuthIdentAddrStart and ipsAuthIdentAddrEnd may be set
+        when this value is 'active'.  The value of
+        ipsAuthIdentAddrType may not be set when this value is
+        'active'."
+::= { ipsAuthIdentAddrAttributesEntry 5 }
+
+ipsAuthIdentAddrStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthIdentAddrAttributesEntry 6 }
+
+ipsAuthCredential OBJECT IDENTIFIER ::= { ipsAuthObjects 6 }
+
+-- Credential Attributes Table
+
+ipsAuthCredentialAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthCredentialAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of credentials related to user identities
+        that are allowed as valid authenticators of the
+        particular identity."
+::= { ipsAuthCredential 1 }
+
+ipsAuthCredentialAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthCredentialAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a credential that verifies a user
+        identity within an authorization instance.
+
+        To provide complete information in this MIB for a credential,
+        the management station must not only create the row in this
+        table but must also create a row in another table, where the
+        other table is determined by the value of
+        ipsAuthCredAuthMethod, e.g., if ipsAuthCredAuthMethod has the
+        value ipsAuthMethodChap, a row must be created in the
+        ipsAuthCredChapAttributesTable."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
+::= { ipsAuthCredentialAttributesTable  1 }
+
+IpsAuthCredentialAttributesEntry ::= SEQUENCE {
+    ipsAuthCredIndex               Unsigned32,
+    ipsAuthCredAuthMethod          AutonomousType,
+    ipsAuthCredRowStatus           RowStatus,
+    ipsAuthCredStorageType         StorageType
+}
+
+ipsAuthCredIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular Credential instance within an instance
+        present on the node.
+        This index value must not be modified or reused by
+        an agent unless a reboot has occurred.  An agent
+        should attempt to keep this value persistent across
+        reboots."
+::= { ipsAuthCredentialAttributesEntry 1 }
+
+ipsAuthCredAuthMethod OBJECT-TYPE
+    SYNTAX        AutonomousType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object contains an OBJECT IDENTIFIER
+        that identifies the authentication method
+        used with this credential.
+
+        When a row is created in this table, a corresponding
+        row must be created by the management station
+        in a corresponding table specified by this value.
+
+        When a row is deleted from this table, the corresponding
+        row must be automatically deleted by the agent in
+        the corresponding table specified by this value.
+
+        If the value of this object is ipsAuthMethodNone, no
+        corresponding rows are created or deleted from other
+        tables.
+
+        Some standardized values for this object are defined
+        within the ipsAuthMethodTypes subtree."
+::= { ipsAuthCredentialAttributesEntry 2 }
+
+ipsAuthCredRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The value of
+        ipsAuthCredAuthMethod must not be changed while this row
+        is 'active'."
+::= { ipsAuthCredentialAttributesEntry 3 }
+
+ipsAuthCredStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthCredentialAttributesEntry 4 }
+
+ipsAuthCredChap OBJECT IDENTIFIER ::= { ipsAuthObjects 7 }
+
+-- Credential Chap-Specific Attributes Table
+
+ipsAuthCredChapAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthCredChapAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of CHAP attributes for credentials that
+        use ipsAuthMethodChap as their ipsAuthCredAuthMethod.
+
+        A row in this table can only exist when an instance of
+        the ipsAuthCredAuthMethod object exists (or is created
+
+        simultaneously) having the same instance identifiers
+        and a value of 'ipsAuthMethodChap'."
+::= { ipsAuthCredChap 1 }
+
+ipsAuthCredChapAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthCredChapAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a credential that uses
+        ipsAuthMethodChap as their ipsAuthCredAuthMethod.
+
+        When a row is created in ipsAuthCredentialAttributesTable
+        with ipsAuthCredAuthMethod = ipsAuthCredChap, the
+        management station must create a corresponding row
+        in this table.
+
+        When a row is deleted from ipsAuthCredentialAttributesTable
+        with ipsAuthCredAuthMethod = ipsAuthCredChap, the
+        agent must delete the corresponding row (if any) in
+        this table."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
+::= { ipsAuthCredChapAttributesTable  1 }
+
+IpsAuthCredChapAttributesEntry ::= SEQUENCE {
+    ipsAuthCredChapUserName        SnmpAdminString,
+    ipsAuthCredChapRowStatus       RowStatus,
+    ipsAuthCredChapStorageType     StorageType
+}
+
+ipsAuthCredChapUserName OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A character string containing the CHAP user name for this
+        credential."
+    REFERENCE
+        "W. Simpson, RFC 1994: PPP Challenge Handshake
+        Authentication Protocol (CHAP), August 1996"
+::= { ipsAuthCredChapAttributesEntry 1 }
+
+ipsAuthCredChapRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The value of
+        ipsAuthCredChapUserName may be changed while this row
+        is 'active'."
+::= { ipsAuthCredChapAttributesEntry 2 }
+
+ipsAuthCredChapStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthCredChapAttributesEntry 3 }
+
+ipsAuthCredSrp OBJECT IDENTIFIER ::= { ipsAuthObjects 8 }
+
+-- Credential Srp-Specific Attributes Table
+
+ipsAuthCredSrpAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthCredSrpAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of SRP attributes for credentials that
+        use ipsAuthMethodSrp as its ipsAuthCredAuthMethod.
+
+        A row in this table can only exist when an instance of
+        the ipsAuthCredAuthMethod object exists (or is created
+        simultaneously) having the same instance identifiers
+        and a value of 'ipsAuthMethodSrp'."
+::= { ipsAuthCredSrp 1 }
+
+ipsAuthCredSrpAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthCredSrpAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a credential that uses
+        ipsAuthMethodSrp as their ipsAuthCredAuthMethod.
+
+        When a row is created in ipsAuthCredentialAttributesTable
+        with ipsAuthCredAuthMethod = ipsAuthCredSrp, the
+        management station must create a corresponding row
+        in this table.
+
+        When a row is deleted from ipsAuthCredentialAttributesTable
+        with ipsAuthCredAuthMethod = ipsAuthCredSrp, the
+        agent must delete the corresponding row (if any) in
+        this table."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
+::= { ipsAuthCredSrpAttributesTable  1 }
+
+IpsAuthCredSrpAttributesEntry ::= SEQUENCE {
+    ipsAuthCredSrpUserName         SnmpAdminString,
+    ipsAuthCredSrpRowStatus        RowStatus,
+    ipsAuthCredSrpStorageType      StorageType
+}
+
+ipsAuthCredSrpUserName OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A character string containing the SRP user name for this
+        credential."
+    REFERENCE
+       "T. Wu, RFC 2945: The SRP Authentication and Key
+       Exchange System, September 2000"
+::= { ipsAuthCredSrpAttributesEntry 1 }
+
+ipsAuthCredSrpRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The value of
+        ipsAuthCredSrpUserName may be changed while the status
+        of this row is 'active'."
+::= { ipsAuthCredSrpAttributesEntry 2 }
+
+ipsAuthCredSrpStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthCredSrpAttributesEntry 3 }
+
+ipsAuthCredKerberos OBJECT IDENTIFIER ::= { ipsAuthObjects 9 }
+
+-- Credential Kerberos-Specific Attributes Table
+
+ipsAuthCredKerbAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IpsAuthCredKerbAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of Kerberos attributes for credentials that
+        use ipsAuthMethodKerberos as their ipsAuthCredAuthMethod.
+
+        A row in this table can only exist when an instance of
+        the ipsAuthCredAuthMethod object exists (or is created
+        simultaneously) having the same instance identifiers
+        and a value of 'ipsAuthMethodKerb'."
+::= { ipsAuthCredKerberos 1 }
+
+ipsAuthCredKerbAttributesEntry OBJECT-TYPE
+    SYNTAX        IpsAuthCredKerbAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a credential that uses
+        ipsAuthMethodKerberos as its ipsAuthCredAuthMethod.
+
+        When a row is created in ipsAuthCredentialAttributesTable
+        with ipsAuthCredAuthMethod = ipsAuthCredKerberos, the
+        management station must create a corresponding row
+        in this table.
+
+        When a row is deleted from ipsAuthCredentialAttributesTable
+        with ipsAuthCredAuthMethod = ipsAuthCredKerberos, the
+        agent must delete the corresponding row (if any) in
+        this table."
+    INDEX { ipsAuthInstIndex, ipsAuthIdentIndex, ipsAuthCredIndex }
+::= { ipsAuthCredKerbAttributesTable  1 }
+
+IpsAuthCredKerbAttributesEntry ::= SEQUENCE {
+
+    ipsAuthCredKerbPrincipal       SnmpAdminString,
+    ipsAuthCredKerbRowStatus       RowStatus,
+    ipsAuthCredKerbStorageType     StorageType
+}
+
+ipsAuthCredKerbPrincipal OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A character string containing a Kerberos principal
+        for this credential."
+    REFERENCE
+        "C. Neuman, S. Hartman, and K. Raeburn, RFC 4120:
+        The Kerberos Network Authentication Service (V5),
+        July 2005"
+::= { ipsAuthCredKerbAttributesEntry 1 }
+
+ipsAuthCredKerbRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        Rows may be discarded using RowStatus.  The value of
+        ipsAuthCredKerbPrincipal may be changed while this row
+        is 'active'."
+::= { ipsAuthCredKerbAttributesEntry 2 }
+
+ipsAuthCredKerbStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-create objects in this row.
+         Rows in this table that were created through an external
+         process may have a storage type of readOnly or permanent.
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { ipsAuthCredKerbAttributesEntry 3 }
+
+--******************************************************************
+-- Notifications
+
+-- There are no notifications necessary in this MIB module.
+
+--******************************************************************
+
+-- Conformance Statements
+
+ipsAuthCompliances OBJECT IDENTIFIER ::= { ipsAuthConformance 1 }
+ipsAuthGroups      OBJECT IDENTIFIER ::= { ipsAuthConformance 2 }
+
+ipsAuthInstanceAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthInstDescr,
+        ipsAuthInstStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        authorization instances."
+::= { ipsAuthGroups 1 }
+
+ipsAuthIdentAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthIdentDescription,
+        ipsAuthIdentRowStatus,
+        ipsAuthIdentStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        user identities within an authorization instance."
+::= { ipsAuthGroups 2 }
+
+ipsAuthIdentNameAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthIdentName,
+        ipsAuthIdentNameRowStatus,
+        ipsAuthIdentNameStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        user names within user identities within an authorization
+        instance."
+::= { ipsAuthGroups 3 }
+
+ipsAuthIdentAddrAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthIdentAddrType,
+        ipsAuthIdentAddrStart,
+        ipsAuthIdentAddrEnd,
+        ipsAuthIdentAddrRowStatus,
+        ipsAuthIdentAddrStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        address ranges within user identities within an
+        authorization instance."
+::= { ipsAuthGroups 4 }
+
+ipsAuthIdentCredAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthCredAuthMethod,
+        ipsAuthCredRowStatus,
+        ipsAuthCredStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        credentials within user identities within an authorization
+        instance."
+::= { ipsAuthGroups 5 }
+
+ipsAuthIdentChapAttrGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthCredChapUserName,
+        ipsAuthCredChapRowStatus,
+        ipsAuthCredChapStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        CHAP credentials within user identities within an
+        authorization instance."
+::= { ipsAuthGroups 6 }
+
+ipsAuthIdentSrpAttrGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthCredSrpUserName,
+        ipsAuthCredSrpRowStatus,
+        ipsAuthCredSrpStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        SRP credentials within user identities within an
+        authorization instance."
+::= { ipsAuthGroups 7 }
+
+ipsAuthIdentKerberosAttrGroup OBJECT-GROUP
+    OBJECTS {
+        ipsAuthCredKerbPrincipal,
+        ipsAuthCredKerbRowStatus,
+        ipsAuthCredKerbStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        Kerberos credentials within user identities within an
+        authorization instance."
+::= { ipsAuthGroups 8 }
+
+--******************************************************************
+
+ipsAuthComplianceV1 MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "Initial version of compliance statement based on
+        initial version of this MIB module.
+
+        The Instance and Identity groups are mandatory;
+        at least one of the other groups (Name, Address,
+        Credential, Certificate) is also mandatory for
+        any given implementation."
+    MODULE       -- this module
+    MANDATORY-GROUPS {
+        ipsAuthInstanceAttributesGroup,
+        ipsAuthIdentAttributesGroup
+    }
+
+    -- Conditionally mandatory groups to be included with
+    -- the mandatory groups when necessary.
+
+    GROUP ipsAuthIdentNameAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all implementations
+        that make use of unique identity names."
+
+    GROUP ipsAuthIdentAddrAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all implementations
+        that use addresses to help verify identities."
+
+    GROUP ipsAuthIdentCredAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all implementations
+        that use credentials to help verify identities."
+
+    GROUP ipsAuthIdentChapAttrGroup
+    DESCRIPTION
+        "This group is mandatory for all implementations
+        that use CHAP to help verify identities.
+
+        The ipsAuthIdentCredAttributesGroup must be
+        implemented if this group is implemented."
+
+    GROUP ipsAuthIdentSrpAttrGroup
+    DESCRIPTION
+        "This group is mandatory for all implementations
+        that use SRP to help verify identities.
+
+        The ipsAuthIdentCredAttributesGroup must be
+        implemented if this group is implemented."
+
+    GROUP ipsAuthIdentKerberosAttrGroup
+    DESCRIPTION
+        "This group is mandatory for all implementations
+        that use Kerberos to help verify identities.
+
+        The ipsAuthIdentCredAttributesGroup must be
+        implemented if this group is implemented."
+
+    OBJECT ipsAuthInstDescr
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthInstStorageType
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthIdentDescription
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthIdentRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the
+        six enumerated values for the RowStatus textual
+        convention need be supported, specifically:
+        active(1)."
+
+    OBJECT ipsAuthIdentName
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthIdentNameRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the
+        six enumerated values for the RowStatus textual
+        convention need be supported, specifically:
+        active(1)."
+
+    OBJECT ipsAuthIdentAddrType
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthIdentAddrStart
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthIdentAddrEnd
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthIdentAddrRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the
+        six enumerated values for the RowStatus textual
+        convention need be supported, specifically:
+        active(1)."
+
+    OBJECT ipsAuthCredAuthMethod
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthCredRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the
+
+        six enumerated values for the RowStatus textual
+        convention need be supported, specifically:
+        active(1)."
+
+    OBJECT ipsAuthCredChapUserName
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthCredChapRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the
+        six enumerated values for the RowStatus textual
+        convention need be supported, specifically:
+        active(1)."
+
+    OBJECT ipsAuthCredSrpUserName
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthCredSrpRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the
+        six enumerated values for the RowStatus textual
+        convention need be supported, specifically:
+        active(1)."
+
+    OBJECT ipsAuthCredKerbPrincipal
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT ipsAuthCredKerbRowStatus
+    SYNTAX INTEGER { active(1) } -- subset of RowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required, and only one of the six
+        enumerated values for the RowStatus textual convention need
+        be supported, specifically:  active(1)."
+::= { ipsAuthCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/IPSEC-SPD-MIB.mib b/snmp_builder/mibs/IPSEC-SPD-MIB.mib
new file mode 100644
index 0000000..599e4dc
--- /dev/null
+++ b/snmp_builder/mibs/IPSEC-SPD-MIB.mib
@@ -0,0 +1,2682 @@
+IPSEC-SPD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32,
+    Unsigned32, mib-2            FROM SNMPv2-SMI
+                                        -- [RFC2578]
+
+    TEXTUAL-CONVENTION, RowStatus, TruthValue,
+    TimeStamp, StorageType, VariablePointer
+                                        FROM SNMPv2-TC
+                                        -- [RFC2579]
+
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                                        FROM SNMPv2-CONF
+                                        -- [RFC2580]
+
+    InterfaceIndex
+                                        FROM IF-MIB
+                                        -- [RFC2863]
+
+    diffServMIBMultiFieldClfrGroup, IfDirection,
+    diffServMultiFieldClfrNextFree
+                                        FROM DIFFSERV-MIB
+                                        -- [RFC3289]
+
+    InetAddressType, InetAddress
+                                        FROM INET-ADDRESS-MIB
+                                        -- [RFC4001]
+
+    SnmpAdminString                     FROM SNMP-FRAMEWORK-MIB
+                                        -- [RFC3411]
+
+    ;
+
+--
+-- module identity
+--
+
+spdMIB MODULE-IDENTITY
+    LAST-UPDATED "200702070000Z"    -- 7 February 2007
+    ORGANIZATION "IETF IP Security Policy Working Group"
+    CONTACT-INFO "Michael Baer
+                  P.O. Box 72682
+                  Davis, CA 95617
+                  Phone: +1 530 902 3131
+                  Email: baerm@tislabs.com
+
+                  Ricky Charlet
+                  Email: rcharlet@alumni.calpoly.edu
+
+                  Wes Hardaker
+                  Sparta, Inc.
+                  P.O. Box 382
+                  Davis, CA  95617
+                  Phone: +1 530 792 1913
+                  Email: hardaker@tislabs.com
+
+                  Robert Story
+                  Revelstone Software
+                  PO Box 1812
+
+                  Tucker, GA 30085
+                  Phone: +1 770 617 3722
+                  Email: rstory@ipsp.revelstone.com
+
+                  Cliff Wang
+                  ARO
+                  4300 S. Miami Blvd.
+                  Durham, NC 27703
+                  E-Mail: cliffwangmail@yahoo.com"
+    DESCRIPTION
+     "This MIB module defines configuration objects for managing
+      IPsec Security Policies.  In general, this MIB can be
+      implemented anywhere IPsec security services exist (e.g.,
+      bump-in-the-wire, host, gateway, firewall, router, etc.).
+
+      Copyright (C) The IETF Trust (2007).  This version of
+      this MIB module is part of RFC 4807; see the RFC itself for
+      full legal notices."
+
+-- Revision History
+
+    REVISION     "200702070000Z"    -- 7 February 2007
+    DESCRIPTION  "Initial version, published as RFC 4807."
+    ::= { mib-2 153 }
+
+--
+-- groups of related objects
+--
+
+spdConfigObjects         OBJECT IDENTIFIER
+     ::= { spdMIB 1 }
+spdNotificationObjects   OBJECT IDENTIFIER
+     ::= { spdMIB 2 }
+spdConformanceObjects    OBJECT IDENTIFIER
+     ::= { spdMIB 3 }
+spdActions               OBJECT IDENTIFIER
+     ::= { spdMIB 4 }
+
+--
+-- Textual Conventions
+--
+
+SpdBooleanOperator ::= TEXTUAL-CONVENTION
+    STATUS   current
+    DESCRIPTION
+        "The SpdBooleanOperator operator is used to specify
+         whether sub-components in a decision-making process are
+
+         ANDed or ORed together to decide if the resulting
+         expression is true or false."
+    SYNTAX      INTEGER { or(1), and(2) }
+
+SpdAdminStatus ::= TEXTUAL-CONVENTION
+    STATUS   current
+    DESCRIPTION
+        "The SpdAdminStatus is used to specify the administrative
+         status of an object.  Objects that are disabled MUST NOT
+         be used by the packet processing engine."
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+
+SpdIPPacketLogging ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS   current
+    DESCRIPTION
+        "SpdIPPacketLogging specifies whether an audit message
+         SHOULD be logged if a packet is passed through a Security
+         Association (SA) and if some of that packet is included in
+         the log event.  A value of '-1' indicates no logging.  A
+         value of '0' or greater indicates that logging SHOULD be
+         done and indicates the number of bytes starting at the
+         beginning of the packet to place in the log.  Values greater
+         than the size of the packet being processed indicate that
+         the entire packet SHOULD be sent.
+
+         Examples:
+         '-1' no logging
+         '0'  log but do not include any of the packet in the log
+         '20' log and include the first 20 bytes of the packet
+              in the log."
+    SYNTAX      Integer32 (-1..65535)
+
+SpdTimePeriod ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "31t"
+    STATUS       current
+    DESCRIPTION
+        "This property identifies an overall range of calendar dates
+         and time.  In a boolean context, a value within this time
+         range, inclusive, is considered true.
+
+         This information is encoded as an octet string using
+         the UTF-8 transformation format described in STD 63,
+         RFC 3629.
+
+         It uses the format suggested in RFC 3060.  An octet string
+
+         represents a start date and time and an end date and time.
+         For example:
+
+         yyyymmddThhmmss/yyyymmddThhmmss
+
+         Where: yyyy = year     mm = month     dd = day
+                  hh = hour     mm = minute    ss = second
+
+         The first 'yyyymmddThhmmss' sub-string indicates the start
+         date and time.  The second 'yyyymmddThhmmss' sub-string
+         indicates the end date and time.  The character 'T' within
+         these sub-strings indicates the beginning of the time
+         portion of each sub-string.  The solidus character '/'
+         separates the start from the end date and time.  The end
+         date and time MUST be subsequent to the start date and
+         time.
+
+         There are also two allowed substitutes for a
+         'yyyymmddThhmmss' sub-string: one for the start date and
+         time, and one for the end date and time.
+
+         If the start date and time are replaced with the string
+         'THISANDPRIOR', this sub-string would indicate the current
+         date and time and the previous dates and time.
+
+         If the end date and time are replaced with the string
+         'THISANDFUTURE', this sub-string would indicate the current
+         date and time and the subsequent dates and time.
+
+         Any of the following SHOULD be considered a
+         'wrongValue' error:
+         - Setting a value with the end date and time earlier than
+           or equal to the start date and time.
+         - Setting the start date and time to 'THISANDFUTURE'.
+         - Setting the end date and time to 'THISANDPRIOR'."
+    REFERENCE "RFC 3060, 3269"
+    SYNTAX      OCTET STRING (SIZE (0..31))
+--
+-- Policy group definitions
+--
+
+spdLocalConfigObjects OBJECT IDENTIFIER
+     ::= { spdConfigObjects 1 }
+
+spdIngressPolicyGroupName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the global system policy group that
+        is to be applied on ingress packets (i.e., arriving at an
+        interface from a network) when a given endpoint does not
+        contain a policy definition in the spdEndpointToGroupTable.
+        Its value can be used as an index into the
+        spdGroupContentsTable to retrieve a list of policies.  A
+        zero length string indicates that no system-wide policy exists
+        and the default policy of 'drop' SHOULD be executed for
+        ingress packets until one is imposed by either this object
+        or by the endpoint processing a given packet.
+
+        This object MUST be persistent"
+    DEFVAL { "" }
+    ::= { spdLocalConfigObjects 1 }
+
+spdEgressPolicyGroupName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the policy group containing the
+         global system policy that is to be applied on egress
+         packets (i.e., packets leaving an interface and entering a
+         network) when a given endpoint does not contain a policy
+         definition in the spdEndpointToGroupTable.  Its value can
+         be used as an index into the spdGroupContentsTable to
+         retrieve a list of policies.  A zero length string
+         indicates that no system-wide policy exists and the default
+         policy of 'drop' SHOULD be executed for egress packets
+         until one is imposed by either this object or by the
+         endpoint processing a given packet.
+
+         This object MUST be persistent"
+    DEFVAL { "" }
+    ::= { spdLocalConfigObjects 2 }
+
+spdEndpointToGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdEndpointToGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table maps policies (groupings) onto an endpoint
+         (interface).  A policy group assigned to an endpoint is then
+         used to control access to the network traffic passing
+         through that endpoint.
+
+         If an endpoint has been configured with a policy group and
+         no rule within that policy group matches that packet, the
+         default action in this case SHALL be to drop the packet.
+
+         If no policy group has been assigned to an endpoint, then
+         the policy group specified by spdIngressPolicyGroupName MUST
+         be used on traffic inbound from the network through that
+         endpoint, and the policy group specified by
+         spdEgressPolicyGroupName MUST be used for traffic outbound
+         to the network through that endpoint."
+    ::= { spdConfigObjects 2 }
+
+spdEndpointToGroupEntry OBJECT-TYPE
+    SYNTAX      SpdEndpointToGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A mapping assigning a policy group to an endpoint."
+    INDEX { spdEndGroupDirection, spdEndGroupInterface }
+    ::= { spdEndpointToGroupTable 1 }
+
+SpdEndpointToGroupEntry ::= SEQUENCE {
+    spdEndGroupDirection                      IfDirection,
+    spdEndGroupInterface                      InterfaceIndex,
+    spdEndGroupName                           SnmpAdminString,
+    spdEndGroupLastChanged                    TimeStamp,
+    spdEndGroupStorageType                    StorageType,
+    spdEndGroupRowStatus                      RowStatus
+}
+
+spdEndGroupDirection OBJECT-TYPE
+    SYNTAX      IfDirection
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This object indicates which direction of packets crossing
+         the interface are associated with which spdEndGroupName
+         object.  Ingress packets, or packets into the device match
+         when this value is inbound(1).  Egress packets or packets
+         out of the device match when this value is outbound(2)."
+    ::= { spdEndpointToGroupEntry 1 }
+
+spdEndGroupInterface OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This value matches the IF-MIB's ifTable's ifIndex column
+         and indicates the interface associated with a given
+         endpoint.  This object can be used to uniquely identify an
+         endpoint that a set of policy groups are applied to."
+    ::= { spdEndpointToGroupEntry 2 }
+
+spdEndGroupName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The policy group name to apply at this endpoint.  The
+         value of the spdEndGroupName object is then used as an
+         index into the spdGroupContentsTable to come up with a list
+         of rules that MUST be applied at this endpoint."
+    ::= { spdEndpointToGroupEntry 3 }
+
+spdEndGroupLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdEndpointToGroupEntry 4 }
+
+spdEndGroupStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a storage
+         type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdEndpointToGroupEntry 5 }
+
+spdEndGroupRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         This object is considered 'notReady' and MUST NOT be set to
+         active until one or more active rows exist within the
+         spdGroupContentsTable for the group referenced by the
+         spdEndGroupName object."
+    ::= { spdEndpointToGroupEntry 6 }
+
+--
+-- policy group definition table
+--
+
+spdGroupContentsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdGroupContentsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains a list of rules and/or subgroups
+         contained within a given policy group.  For a given value
+         of spdGroupContName, the set of rows sharing that value
+         forms a 'group'.  The rows in a group MUST be processed
+         according to the value of the spdGroupContPriority object
+         in each row.  The processing MUST be executed starting with
+         the lowest value of spdGroupContPriority and in ascending
+         order thereafter.
+
+         If an action is executed as the result of the processing of
+         a row in a group, the processing of further rows in that
+         group MUST stop.  Iterating to the next policy group row by
+         finding the next largest spdGroupContPriority object SHALL
+         only be done if no actions were run while processing the
+         current row for a given packet."
+    ::= { spdConfigObjects 3 }
+
+spdGroupContentsEntry OBJECT-TYPE
+    SYNTAX      SpdGroupContentsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a given sub-component within a policy group.  A
+         sub-component is either a rule or another group as
+         indicated by spdGroupContComponentType and referenced by
+         spdGroupContComponentName."
+    INDEX   { spdGroupContName, spdGroupContPriority }
+    ::= { spdGroupContentsTable 1 }
+
+SpdGroupContentsEntry ::= SEQUENCE {
+    spdGroupContName                        SnmpAdminString,
+    spdGroupContPriority                    Integer32,
+    spdGroupContFilter                      VariablePointer,
+    spdGroupContComponentType               INTEGER,
+    spdGroupContComponentName               SnmpAdminString,
+    spdGroupContLastChanged                 TimeStamp,
+    spdGroupContStorageType                 StorageType,
+    spdGroupContRowStatus                   RowStatus
+}
+
+spdGroupContName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The administrative name of the group associated with this
+        row.  A 'group' is formed by all the rows in this table that
+        have the same value of this object."
+    ::= { spdGroupContentsEntry 1 }
+
+spdGroupContPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The priority (sequence number) of the sub-component in
+         a group that this row represents.  This value indicates
+         the order that each row of this table MUST be processed
+         from low to high.  For example, a row with a priority of 0
+         is processed before a row with a priority of 1, a 1 before
+         a 2, etc."
+    ::= { spdGroupContentsEntry 2 }
+
+spdGroupContFilter OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "spdGroupContFilter points to a filter that is evaluated
+         to determine whether the spdGroupContComponentName within
+         this row is exercised.  Managers can use this object to
+         classify groups of rules, or subgroups, together in order to
+         achieve a greater degree of control and optimization over
+         the execution order of the items within the group.  If the
+
+         filter evaluates to false, the rule or subgroup will be
+         skipped and the next rule or subgroup will be evaluated
+         instead.  This value can be used to indicate a scalar or
+         row in a table.  When indicating a row in a table, this
+         value MUST point to the first column instance in that row.
+
+         An example usage of this object would be to limit a
+         group of rules to executing only when the IP packet
+         being processed is designated to be processed by IKE.
+         This effectively creates a group of IKE-specific rules.
+
+         The following tables and scalars can be pointed to by this
+         column.  All but diffServMultiFieldClfrTable are defined in
+         this MIB:
+
+                diffServMultiFieldClfrTable
+                spdIpOffsetFilterTable
+                spdTimeFilterTable
+                spdCompoundFilterTable
+                spdTrueFilter
+                spdIpsoHeaderFilterTable
+
+         Implementations MAY choose to provide support for other
+         filter tables or scalars.
+
+         If this column is set to a VariablePointer value, which
+         references a non-existent row in an otherwise supported
+         table, the inconsistentName exception MUST be returned.  If
+         the table or scalar pointed to by the VariablePointer is
+         not supported at all, then an inconsistentValue exception
+         MUST be returned.
+
+         If, during packet processing, a row in this table is applied
+         to a packet and the value of this column in that row
+         references a non-existent or non-supported object, the
+         packet MUST be dropped."
+    REFERENCE "RFC 3289"
+    DEFVAL { spdTrueFilterInstance }
+    ::= { spdGroupContentsEntry 3 }
+
+spdGroupContComponentType OBJECT-TYPE
+    SYNTAX      INTEGER { group(1), rule(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether the spdGroupContComponentName object
+         is the name of another group defined within the
+         spdGroupContentsTable or is the name of a rule defined
+
+         within the spdRuleDefinitionTable."
+    DEFVAL { rule }
+    ::= { spdGroupContentsEntry 4 }
+
+spdGroupContComponentName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The name of the policy rule or subgroup contained within
+         this row, as indicated by the spdGroupContComponentType
+         object."
+    ::= { spdGroupContentsEntry 5 }
+
+spdGroupContLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem,
+         this object SHOULD have a zero value."
+    ::= { spdGroupContentsEntry 6 }
+
+spdGroupContStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a storage
+         type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdGroupContentsEntry 7 }
+
+spdGroupContRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         This object MUST NOT be set to active until the row to
+         which the spdGroupContComponentName points to exists and is
+         active.
+
+         If active, this object MUST remain active unless one of the
+         following two conditions are met:
+
+         I.  No active row in spdEndpointToGroupTable exists that
+             references this row's group (i.e., indicate this row's
+             spdGroupContName).
+
+         II. Or at least one other active row in this table has a
+             matching spdGroupContName.
+
+         If neither condition is met, an attempt to set this row to
+         something other than active MUST result in an
+         inconsistentValue error."
+    ::= { spdGroupContentsEntry 8 }
+
+--
+-- policy definition table
+--
+
+spdRuleDefinitionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdRuleDefinitionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines a rule by associating a filter
+         or a set of filters to an action to be executed."
+    ::= { spdConfigObjects 4 }
+
+spdRuleDefinitionEntry OBJECT-TYPE
+    SYNTAX      SpdRuleDefinitionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A row defining a particular rule definition.  A rule
+         definition binds a filter pointer to an action pointer."
+    INDEX   { spdRuleDefName }
+    ::= { spdRuleDefinitionTable 1 }
+
+SpdRuleDefinitionEntry ::= SEQUENCE {
+    spdRuleDefName                          SnmpAdminString,
+    spdRuleDefDescription                   SnmpAdminString,
+    spdRuleDefFilter                        VariablePointer,
+    spdRuleDefFilterNegated                 TruthValue,
+    spdRuleDefAction                        VariablePointer,
+    spdRuleDefAdminStatus                   SpdAdminStatus,
+    spdRuleDefLastChanged                   TimeStamp,
+    spdRuleDefStorageType                   StorageType,
+    spdRuleDefRowStatus                     RowStatus
+}
+
+spdRuleDefName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "spdRuleDefName is the administratively assigned name of
+         the rule referred to by the spdGroupContComponentName
+         object."
+    ::= { spdRuleDefinitionEntry 1 }
+
+spdRuleDefDescription OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A user defined string.  This field MAY be used for
+         administrative tracking purposes."
+    DEFVAL { "" }
+    ::= { spdRuleDefinitionEntry 2 }
+
+spdRuleDefFilter OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "spdRuleDefFilter points to a filter that is used to
+         evaluate whether the action associated with this row is
+         executed or not.  The action will only execute if the
+         filter referenced by this object evaluates to TRUE after
+         first applying any negation required by the
+         spdRuleDefFilterNegated object.
+
+         The following tables and scalars can be pointed to by this
+         column.  All but diffServMultiFieldClfrTable are defined in
+         this MIB.  Implementations MAY choose to provide support
+         for other filter tables or scalars as well:
+
+                diffServMultiFieldClfrTable
+
+                spdIpOffsetFilterTable
+                spdTimeFilterTable
+                spdCompoundFilterTable
+                spdTrueFilter
+
+         If this column is set to a VariablePointer value, which
+         references a non-existent row in an otherwise supported
+         table, the inconsistentName exception MUST be returned.  If
+         the table or scalar pointed to by the VariablePointer is
+         not supported at all, then an inconsistentValue exception
+         MUST be returned.
+
+         If, during packet processing, this column has a value that
+         references a non-existent or non-supported object, the
+         packet MUST be dropped."
+    REFERENCE "RFC 3289"
+    ::= { spdRuleDefinitionEntry 3 }
+
+spdRuleDefFilterNegated OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "spdRuleDefFilterNegated specifies whether or not the results of
+         the filter referenced by the spdRuleDefFilter object is
+         negated."
+    DEFVAL { false }
+    ::= { spdRuleDefinitionEntry 4 }
+
+spdRuleDefAction OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This column points to the action to be taken.  It MAY,
+         but is not limited to, point to a row in one of the
+         following tables:
+
+            spdCompoundActionTable
+            ipsaSaPreconfiguredActionTable
+            ipiaIkeActionTable
+            ipiaIpsecActionTable
+
+         It MAY also point to one of the scalar objects beneath
+         spdStaticActions.
+
+         If this object is set to a pointer to a row in an
+         unsupported (or unknown) table, an inconsistentValue
+
+         error MUST be returned.
+
+         If this object is set to point to a non-existent row in an
+         otherwise supported table, an inconsistentName error MUST
+         be returned.
+
+         If, during packet processing, this column has a value that
+         references a non-existent or non-supported object, the
+         packet MUST be dropped."
+    ::= { spdRuleDefinitionEntry 5 }
+
+spdRuleDefAdminStatus OBJECT-TYPE
+    SYNTAX      SpdAdminStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether the current rule definition is considered
+         active.  If the value is enabled, the rule MUST be evaluated
+         when processing packets.  If the value is disabled, the
+         packet processing MUST continue as if this rule's filter
+         had effectively failed."
+    DEFVAL { enabled }
+    ::= { spdRuleDefinitionEntry 6 }
+
+spdRuleDefLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdRuleDefinitionEntry 7 }
+
+spdRuleDefStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a
+         storage type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdRuleDefinitionEntry 8 }
+
+spdRuleDefRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         This object MUST NOT be set to active until the containing
+         conditions, filters, and actions have been defined.  Once
+         active, it MUST remain active until no active
+         policyGroupContents entries are referencing it.  A failed
+         attempt to do so MUST return an inconsistentValue error."
+    ::= { spdRuleDefinitionEntry 9 }
+
+--
+-- Policy compound filter definition table
+--
+
+spdCompoundFilterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdCompoundFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table defining compound filters and their associated
+         parameters.  A row in this table can be pointed to by a
+         spdRuleDefFilter object."
+    ::= { spdConfigObjects 5 }
+
+spdCompoundFilterEntry OBJECT-TYPE
+    SYNTAX      SpdCompoundFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the spdCompoundFilterTable.  Each entry in this
+         table represents a compound filter.  A filter defined by
+         this table is considered to have a TRUE return value if and
+         only if:
+
+         spdCompFiltLogicType is AND and all of the sub-filters
+         associated with it, as defined in the spdSubfiltersTable,
+         are all true themselves (after applying any required
+
+         negation, as defined by the ficFilterIsNegated object).
+
+         spdCompFiltLogicType is OR and at least one of the
+         sub-filters associated with it, as defined in the
+         spdSubfiltersTable, is true itself (after applying any
+         required negation, as defined by the ficFilterIsNegated
+         object."
+    INDEX       { spdCompFiltName }
+    ::= { spdCompoundFilterTable 1 }
+
+SpdCompoundFilterEntry ::= SEQUENCE {
+    spdCompFiltName                          SnmpAdminString,
+    spdCompFiltDescription                   SnmpAdminString,
+    spdCompFiltLogicType                     SpdBooleanOperator,
+    spdCompFiltLastChanged                   TimeStamp,
+    spdCompFiltStorageType                   StorageType,
+    spdCompFiltRowStatus                     RowStatus
+}
+
+spdCompFiltName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A user definable string.  This value is used as an index
+         into this table."
+    ::= { spdCompoundFilterEntry 1 }
+
+spdCompFiltDescription OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A user definable string.  This field MAY be used for
+         your administrative tracking purposes."
+    DEFVAL { "" }
+    ::= { spdCompoundFilterEntry 2 }
+
+spdCompFiltLogicType OBJECT-TYPE
+    SYNTAX      SpdBooleanOperator
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether the sub-component filters of this
+         compound filter are functionally ANDed or ORed together."
+    DEFVAL { and }
+    ::= { spdCompoundFilterEntry 3 }
+
+spdCompFiltLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdCompoundFilterEntry 4 }
+
+spdCompFiltStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a
+         storage type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdCompoundFilterEntry 5 }
+
+spdCompFiltRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         Once active, it MUST NOT have its value changed if any
+         active rows in the spdRuleDefinitionTable are currently
+         pointing at this row."
+    ::= { spdCompoundFilterEntry 6 }
+
+--
+-- Policy filters in a cf table
+--
+
+spdSubfiltersTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdSubfiltersEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines a list of filters contained within a
+         given compound filter defined in the
+         spdCompoundFilterTable."
+    ::= { spdConfigObjects 6 }
+
+spdSubfiltersEntry OBJECT-TYPE
+    SYNTAX      SpdSubfiltersEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the spdSubfiltersTable.  There is an entry in
+         this table for each sub-filter of all compound filters
+         present in the spdCompoundFilterTable."
+    INDEX       {  spdCompFiltName, spdSubFiltPriority }
+    ::= { spdSubfiltersTable 1 }
+
+SpdSubfiltersEntry ::= SEQUENCE {
+    spdSubFiltPriority                      Integer32,
+    spdSubFiltSubfilter                     VariablePointer,
+    spdSubFiltSubfilterIsNegated            TruthValue,
+    spdSubFiltLastChanged                   TimeStamp,
+    spdSubFiltStorageType                   StorageType,
+    spdSubFiltRowStatus                     RowStatus
+}
+
+spdSubFiltPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The priority of a given filter within a compound filter.
+         The order of execution is from lowest to highest priority
+         value (i.e., priority 0 before priority 1, 1 before 2,
+         etc.).  Implementations MAY choose to follow this ordering,
+         as set by the manager that created the rows.  This can allow
+         a manager to intelligently construct filter lists such that
+         faster filters are evaluated first."
+    ::= { spdSubfiltersEntry 1 }
+
+spdSubFiltSubfilter OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The OID of the contained filter.  The value of this
+         object is a VariablePointer that references the filter to
+         be included in this compound filter.
+
+         The following tables and scalars can be pointed to by this
+         column.  All but diffServMultiFieldClfrTable are defined in
+         this MIB.  Implementations MAY choose to provide support
+         for other filter tables or scalars as well:
+
+                diffServMultiFieldClfrTable
+                spdIpsoHeaderFilterTable
+                spdIpOffsetFilterTable
+                spdTimeFilterTable
+                spdCompoundFilterTable
+                spdTrueFilter
+
+         If this column is set to a VariablePointer value that
+         references a non-existent row in an otherwise supported
+         table, the inconsistentName exception MUST be returned.  If
+         the table or scalar pointed to by the VariablePointer is
+         not supported at all, then an inconsistentValue exception
+         MUST be returned.
+
+         If, during packet processing, this column has a value that
+         references a non-existent or non-supported object, the
+         packet MUST be dropped."
+    REFERENCE "RFC 3289"
+    ::= { spdSubfiltersEntry 2 }
+
+spdSubFiltSubfilterIsNegated OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether or not the result of applying this sub-filter
+         is negated."
+    DEFVAL { false }
+    ::= { spdSubfiltersEntry 3 }
+
+spdSubFiltLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdSubfiltersEntry 4 }
+
+spdSubFiltStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a
+         storage type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdSubfiltersEntry 5 }
+
+spdSubFiltRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         This object cannot be made active until a filter
+         referenced by the spdSubFiltSubfilter object is both
+         defined and active.  An attempt to do so MUST result in
+         an inconsistentValue error.
+
+         If active, this object MUST remain active unless one of the
+         following two conditions are met:
+
+         I.  No active row in the SpdCompoundFilterTable exists
+             that has a matching spdCompFiltName.
+
+         II. Or, at least one other active row in this table has a
+             matching spdCompFiltName.
+
+         If neither condition is met, an attempt to set this row to
+         something other than active MUST result in an
+         inconsistentValue error."
+    ::= { spdSubfiltersEntry 6 }
+
+--
+-- Static Filters
+--
+
+spdStaticFilters OBJECT IDENTIFIER ::= { spdConfigObjects 7 }
+
+spdTrueFilter OBJECT-TYPE
+        SYNTAX      Integer32 (1)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This scalar indicates a (automatic) true result for
+             a filter.  That is, this is a filter that is always
+             true; it is useful for adding as a default filter for a
+             default action or a set of actions."
+        ::= { spdStaticFilters 1 }
+
+spdTrueFilterInstance OBJECT IDENTIFIER ::= { spdTrueFilter 0 }
+
+--
+-- Policy IP Offset filter definition table
+--
+
+spdIpOffsetFilterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdIpOffsetFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains a list of filter definitions to be
+         used within the spdRuleDefinitionTable or the
+         spdSubfiltersTable.
+
+         This type of filter is used to compare an administrator
+         specified octet string to the octets at a particular
+         location in a packet."
+    ::= { spdConfigObjects 8 }
+
+spdIpOffsetFilterEntry OBJECT-TYPE
+    SYNTAX      SpdIpOffsetFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A definition of a particular filter."
+    INDEX       {  spdIpOffFiltName }
+    ::= { spdIpOffsetFilterTable 1 }
+
+SpdIpOffsetFilterEntry ::= SEQUENCE {
+    spdIpOffFiltName                         SnmpAdminString,
+    spdIpOffFiltOffset                       Unsigned32,
+    spdIpOffFiltType                         INTEGER,
+    spdIpOffFiltValue                        OCTET STRING,
+    spdIpOffFiltLastChanged                  TimeStamp,
+    spdIpOffFiltStorageType                  StorageType,
+    spdIpOffFiltRowStatus                    RowStatus
+}
+
+spdIpOffFiltName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The administrative name for this filter."
+    ::= { spdIpOffsetFilterEntry 1 }
+
+spdIpOffFiltOffset OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This is the byte offset from the front of the entire IP
+         packet where the value or arithmetic comparison is done.  A
+         value of '0' indicates the first byte of the packet header.
+         If this value is greater than the length of the packet, the
+         filter represented by this row should be considered to
+         fail."
+    ::= { spdIpOffsetFilterEntry 2 }
+
+spdIpOffFiltType OBJECT-TYPE
+    SYNTAX INTEGER { equal(1),
+                     notEqual(2),
+                     arithmeticLess(3),
+                     arithmeticGreaterOrEqual(4),
+                     arithmeticGreater(5),
+                     arithmeticLessOrEqual(6) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This defines the various tests that are used when
+         evaluating a given filter.
+
+         The various tests definable in this table are as follows:
+
+         equal:
+           - Tests if the OCTET STRING, 'spdIpOffFiltValue', matches
+
+             a value in the packet starting at the given offset in
+             the packet and comparing the entire OCTET STRING of
+             'spdIpOffFiltValue'.  Any values compared this way are
+             assumed to be unsigned integer values in network byte
+             order of the same length as 'spdIpOffFiltValue'.
+
+         notEqual:
+           - Tests if the OCTET STRING, 'spdIpOffFiltValue', does
+             not match a value in the packet starting at the given
+             offset in the packet and comparing to the entire OCTET
+             STRING of 'spdIpOffFiltValue'.  Any values compared
+             this way are assumed to be unsigned integer values in
+             network byte order of the same length as
+             'spdIpOffFiltValue'.
+
+         arithmeticLess:
+           - Tests if the OCTET STRING, 'spdIpOffFiltValue', is
+             arithmetically less than ('<') the value starting at
+             the given offset within the packet.  The value in the
+             packet is assumed to be an unsigned integer in network
+             byte order of the same length as 'spdIpOffFiltValue'.
+
+         arithmeticGreaterOrEqual:
+           - Tests if the OCTET STRING, 'spdIpOffFiltValue', is
+             arithmetically greater than or equal to ('>=') the
+             value starting at the given offset within the packet.
+             The value in the packet is assumed to be an unsigned
+             integer in network byte order of the same length as
+             'spdIpOffFiltValue'.
+
+         arithmeticGreater:
+           - Tests if the OCTET STRING, 'spdIpOffFiltValue', is
+             arithmetically greater than ('>') the value starting at
+             the given offset within the packet.  The value in the
+             packet is assumed to be an unsigned integer in network
+             byte order of the same length as 'spdIpOffFiltValue'.
+
+         arithmeticLessOrEqual:
+           - Tests if the OCTET STRING, 'spdIpOffFiltValue', is
+             arithmetically less than or equal to ('<=') the value
+             starting at the given offset within the packet.  The
+             value in the packet is assumed to be an unsigned
+             integer in network byte order of the same length as
+             'spdIpOffFiltValue'."
+    ::= { spdIpOffsetFilterEntry 3 }
+
+spdIpOffFiltValue OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "spdIpOffFiltValue is used for match comparisons of a
+         packet at spdIpOffFiltOffset."
+    ::= { spdIpOffsetFilterEntry 4 }
+
+spdIpOffFiltLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdIpOffsetFilterEntry 5 }
+
+spdIpOffFiltStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a
+         storage type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdIpOffsetFilterEntry 6 }
+
+spdIpOffFiltRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         If active, this object MUST remain active if it is
+
+         referenced by an active row in another table.  An attempt
+         to set it to anything other than active while it is
+         referenced by an active row in another table MUST result in
+         an inconsistentValue error."
+    ::= { spdIpOffsetFilterEntry 7 }
+
+--
+-- Time/scheduling filter table
+--
+
+spdTimeFilterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdTimeFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Defines a table of filters that can be used to
+         effectively enable or disable policies based on a valid
+         time range."
+    ::= { spdConfigObjects 9 }
+
+spdTimeFilterEntry OBJECT-TYPE
+    SYNTAX      SpdTimeFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A row describing a given time frame for which a policy
+         is filtered on to activate or deactivate the rule.
+
+         If all the column objects in a row are true for the current
+         time, the row evaluates as 'true'.  More explicitly, the
+         time matching column objects in a row MUST be logically
+         ANDed together to form the boolean true/false for the row."
+    INDEX   { spdTimeFiltName }
+    ::= { spdTimeFilterTable 1 }
+
+SpdTimeFilterEntry ::= SEQUENCE {
+    spdTimeFiltName                 SnmpAdminString,
+    spdTimeFiltPeriod               SpdTimePeriod,
+    spdTimeFiltMonthOfYearMask      BITS,
+    spdTimeFiltDayOfMonthMask       OCTET STRING,
+    spdTimeFiltDayOfWeekMask        BITS,
+    spdTimeFiltTimeOfDayMask        SpdTimePeriod,
+    spdTimeFiltLastChanged          TimeStamp,
+    spdTimeFiltStorageType          StorageType,
+    spdTimeFiltRowStatus            RowStatus
+}
+
+spdTimeFiltName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An administratively assigned name for this filter."
+    ::= { spdTimeFilterEntry 1 }
+
+spdTimeFiltPeriod OBJECT-TYPE
+    SYNTAX      SpdTimePeriod
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The valid time period for this filter.  This column is
+         considered 'true' if the current time is within the range of
+         this object."
+    DEFVAL { "THISANDPRIOR/THISANDFUTURE" }
+    ::= { spdTimeFilterEntry 2 }
+
+spdTimeFiltMonthOfYearMask OBJECT-TYPE
+    SYNTAX      BITS { january(0), february(1), march(2),
+                       april(3), may(4), june(5), july(6),
+                       august(7), september(8), october(9),
+                       november(10), december(11) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A bit mask that indicates acceptable months of the year.
+         This column evaluates to 'true' if the current month's bit
+         is set."
+    DEFVAL { { january, february, march, april, may, june, july,
+               august, september, october, november, december } }
+    ::= { spdTimeFilterEntry 3 }
+
+spdTimeFiltDayOfMonthMask OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(8))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Defines which days of the month the current time is
+         valid for.  It is a sequence of 64 BITS, where each BIT
+         represents a corresponding day of the month in forward or
+         reverse order.  Starting from the left-most bit, the first
+         31 bits identify the day of the month, counting from the
+         beginning of the month.  The following 31 bits (bits 32-62)
+         indicate the day of the month, counting from the end of the
+
+         month.  For months with fewer than 31 days, the bits that
+         correspond to the non-existent days of that month are
+         ignored (e.g., for non-leap year Februarys, bits 29-31 and
+         60-62 are ignored).
+
+         This column evaluates to 'true' if the current day of the
+         month's bit is set.
+
+         For example, a value of 0X'80 00 00 01 00 00 00 00'
+         indicates that this column evaluates to true on the first
+         and last days of the month.
+
+         The last two bits in the string MUST be zero."
+    DEFVAL { 'fffffffffffffffe'H }
+    ::= { spdTimeFilterEntry 4 }
+
+spdTimeFiltDayOfWeekMask OBJECT-TYPE
+    SYNTAX      BITS { sunday(0), monday(1), tuesday(2),
+                       wednesday(3), thursday(4), friday(5),
+                       saturday(6) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A bit mask that defines which days of the week that the current
+         time is valid for.  This column evaluates to 'true' if the
+         current day of the week's bit is set."
+    DEFVAL { { monday, tuesday, wednesday, thursday, friday,
+               saturday, sunday } }
+    ::= { spdTimeFilterEntry 5 }
+
+spdTimeFiltTimeOfDayMask OBJECT-TYPE
+    SYNTAX      SpdTimePeriod
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates the start and end time of the day for which this
+         filter evaluates to true.  The date portions of the
+         spdTimePeriod TC are ignored for purposes of evaluating this
+         mask, and only the time-specific portions are used.
+
+         This column evaluates to 'true' if the current time of day
+         is within the range of the start and end times of the day
+         indicated by this object."
+    DEFVAL { "00000000T000000/00000000T240000" }
+    ::= { spdTimeFilterEntry 6 }
+
+spdTimeFiltLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdTimeFilterEntry 7 }
+
+spdTimeFiltStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a storage
+         type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdTimeFilterEntry 8 }
+
+spdTimeFiltRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this
+         row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         If active, this object MUST remain active if it is
+         referenced by an active row in another table.  An attempt
+         to set it to anything other than active while it is
+         referenced by an active row in another table MUST result in
+         an inconsistentValue error."
+    ::= { spdTimeFilterEntry 9 }
+
+--
+-- IPSO protection authority filtering
+--
+
+spdIpsoHeaderFilterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdIpsoHeaderFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains a list of IPSO header filter
+         definitions to be used within the spdRuleDefinitionTable or
+         the spdSubfiltersTable.  IPSO headers and their values are
+         described in RFC 1108."
+    REFERENCE "RFC 1108"
+    ::= { spdConfigObjects 10 }
+
+spdIpsoHeaderFilterEntry OBJECT-TYPE
+    SYNTAX      SpdIpsoHeaderFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A definition of a particular filter."
+    INDEX       {  spdIpsoHeadFiltName }
+    ::= { spdIpsoHeaderFilterTable 1 }
+
+SpdIpsoHeaderFilterEntry ::= SEQUENCE {
+    spdIpsoHeadFiltName                     SnmpAdminString,
+    spdIpsoHeadFiltType                     BITS,
+    spdIpsoHeadFiltClassification           INTEGER,
+    spdIpsoHeadFiltProtectionAuth           INTEGER,
+    spdIpsoHeadFiltLastChanged              TimeStamp,
+    spdIpsoHeadFiltStorageType              StorageType,
+    spdIpsoHeadFiltRowStatus                RowStatus
+}
+
+spdIpsoHeadFiltName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The administrative name for this filter."
+    ::= { spdIpsoHeaderFilterEntry 1 }
+
+spdIpsoHeadFiltType OBJECT-TYPE
+    SYNTAX      BITS { classificationLevel(0),
+                       protectionAuthority(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates which of the IPSO header field a
+         packet is filtered on for this row.  If this object is set
+         to classification(0), the spdIpsoHeadFiltClassification
+
+         object indicates how the packet is filtered.  If this object
+         is set to protectionAuthority(1), the
+         spdIpsoHeadFiltProtectionAuth object indicates how the
+         packet is filtered."
+    ::= { spdIpsoHeaderFilterEntry 2 }
+
+spdIpsoHeadFiltClassification OBJECT-TYPE
+    SYNTAX      INTEGER { topSecret(61), secret(90),
+                          confidential(150), unclassified(171) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the IPSO classification header field
+         value that the packet MUST have for this row to evaluate to
+         'true'.
+
+         The values of these enumerations are defined by RFC 1108."
+    REFERENCE "RFC 1108"
+    ::= { spdIpsoHeaderFilterEntry 3 }
+
+spdIpsoHeadFiltProtectionAuth OBJECT-TYPE
+    SYNTAX      INTEGER { genser(0), siopesi(1), sci(2),
+                          nsa(3), doe(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the IPSO protection authority header
+         field value that the packet MUST have for this row to
+         evaluate to 'true'.
+
+         The values of these enumerations are defined by RFC 1108.
+         Hence the reason the SMIv2 convention of not using 0 in
+         enumerated lists is violated here."
+    REFERENCE "RFC 1108"
+    ::= { spdIpsoHeaderFilterEntry 4 }
+
+spdIpsoHeadFiltLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdIpsoHeaderFilterEntry 5 }
+
+spdIpsoHeadFiltStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a storage
+         type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdIpsoHeaderFilterEntry 6 }
+
+spdIpsoHeadFiltRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         However, this object MUST NOT be set to active if the
+         requirements of the spdIpsoHeadFiltType object are not met.
+         Specifically, if the spdIpsoHeadFiltType bit for
+         classification(0) is set, the spdIpsoHeadFiltClassification
+         column MUST have a valid value for the row status to be set
+         to active.  If the spdIpsoHeadFiltType bit for
+         protectionAuthority(1) is set, the
+         spdIpsoHeadFiltProtectionAuth column MUST have a valid
+         value for the row status to be set to active.
+
+         If active, this object MUST remain active if it is
+         referenced by an active row in another table.  An attempt
+         to set it to anything other than active while it is
+         referenced by an active row in another table MUST result in
+         an inconsistentValue error."
+    ::= { spdIpsoHeaderFilterEntry 7 }
+
+--
+-- compound actions table
+--
+
+spdCompoundActionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdCompoundActionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Table used to allow multiple actions to be associated
+         with a rule.  It uses the spdSubactionsTable to do this.
+         The rows from spdSubactionsTable that are partially indexed
+         by spdCompActName form the set of compound actions to be
+         performed.  The spdCompActExecutionStrategy column in this
+         table indicates how those actions are processed."
+    ::= { spdConfigObjects 11 }
+
+spdCompoundActionEntry OBJECT-TYPE
+    SYNTAX      SpdCompoundActionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A row in the spdCompoundActionTable."
+    INDEX   { spdCompActName }
+    ::= { spdCompoundActionTable 1 }
+
+SpdCompoundActionEntry ::= SEQUENCE {
+    spdCompActName                      SnmpAdminString,
+    spdCompActExecutionStrategy         INTEGER,
+    spdCompActLastChanged               TimeStamp,
+    spdCompActStorageType               StorageType,
+    spdCompActRowStatus                 RowStatus
+}
+
+spdCompActName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This is an administratively assigned name of this
+         compound action."
+    ::= { spdCompoundActionEntry 1 }
+
+spdCompActExecutionStrategy OBJECT-TYPE
+    SYNTAX      INTEGER { doAll(1),
+                          doUntilSuccess(2),
+                          doUntilFailure(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates how the sub-actions are executed
+         based on the success of the actions as they finish
+         executing.
+
+         doAll           - run each sub-action regardless of the
+                           exit status of the previous action.
+                           This parent action is always
+                           considered to have acted successfully.
+
+         doUntilSuccess  - run each sub-action until one succeeds,
+                           at which point stop processing the
+                           sub-actions within this parent
+                           compound action.  If one of the
+                           sub-actions did execute successfully,
+                           this parent action is also considered
+                           to have executed successfully.
+
+         doUntilFailure  - run each sub-action until one fails,
+                           at which point stop processing the
+                           sub-actions within this compound
+                           action.  If any sub-action fails, the
+                           result of this parent action is
+                           considered to have failed."
+    DEFVAL { doUntilSuccess }
+    ::= { spdCompoundActionEntry 2 }
+
+spdCompActLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdCompoundActionEntry 3 }
+
+spdCompActStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a storage
+         type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdCompoundActionEntry 4 }
+
+spdCompActRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         Once a row in the spdCompoundActionTable has been made
+         active, this object MUST NOT be set to destroy without
+         first destroying all the contained rows listed in the
+         spdSubactionsTable."
+    ::= { spdCompoundActionEntry 5 }
+
+--
+-- actions contained within a compound action
+--
+
+spdSubactionsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SpdSubactionsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains a list of the sub-actions within a
+         given compound action.  Compound actions executing these
+         actions MUST execute them in series based on the
+         spdSubActPriority value, with the lowest value executing
+         first."
+    ::= { spdConfigObjects 12 }
+
+spdSubactionsEntry OBJECT-TYPE
+    SYNTAX      SpdSubactionsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A row containing a reference to a given compound-action
+         sub-action."
+    INDEX   { spdCompActName, spdSubActPriority }
+    ::= { spdSubactionsTable 1 }
+
+SpdSubactionsEntry ::= SEQUENCE {
+    spdSubActPriority                          Integer32,
+    spdSubActSubActionName                     VariablePointer,
+    spdSubActLastChanged                       TimeStamp,
+    spdSubActStorageType                       StorageType,
+    spdSubActRowStatus                         RowStatus
+}
+
+spdSubActPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The priority of a given sub-action within a compound
+         action.  The order in which sub-actions MUST be executed
+         are based on the value from this column, with the lowest
+         numeric value executing first (i.e., priority 0 before
+         priority 1, 1 before 2, etc.)."
+    ::= { spdSubactionsEntry 1 }
+
+spdSubActSubActionName OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This column points to the action to be taken.  It MAY,
+         but is not limited to, point to a row in one of the
+         following tables:
+
+            spdCompoundActionTable         - Allowing recursion
+            ipsaSaPreconfiguredActionTable
+            ipiaIkeActionTable
+            ipiaIpsecActionTable
+
+         It MAY also point to one of the scalar objects beneath
+         spdStaticActions.
+
+         If this object is set to a pointer to a row in an
+         unsupported (or unknown) table, an inconsistentValue
+         error MUST be returned.
+
+         If this object is set to point to a non-existent row in
+         an otherwise supported table, an inconsistentName error
+         MUST be returned.
+
+         If, during packet processing, this column has a value that
+         references a non-existent or non-supported object, the
+         packet MUST be dropped."
+    ::= { spdSubactionsEntry 2 }
+
+spdSubActLastChanged OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this row was last modified
+         or created either through SNMP SETs or by some other
+         external means.
+
+         If this row has not been modified since the last
+         re-initialization of the network management subsystem, this
+         object SHOULD have a zero value."
+    ::= { spdSubactionsEntry 3 }
+
+spdSubActStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that
+         were created through an external process MAY have a storage
+         type of readOnly or permanent.
+
+         For a storage type of permanent, none of the columns have
+         to be writable."
+    DEFVAL { nonVolatile }
+    ::= { spdSubactionsEntry 4 }
+
+spdSubActRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the conceptual status of this row.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified.
+
+         If active, this object MUST remain active unless one of the
+         following two conditions are met.  An attempt to set it to
+         anything other than active while the following conditions
+         are not met MUST result in an inconsistentValue error.  The
+         two conditions are:
+
+         I.  No active row in the spdCompoundActionTable exists
+             which has a matching spdCompActName.
+
+         II. Or, at least one other active row in this table has a
+             matching spdCompActName."
+    ::= { spdSubactionsEntry 5 }
+
+--
+-- Static Actions
+--
+
+-- these are static actions that can be pointed to by the
+-- spdRuleDefAction or the spdSubActSubActionName objects to
+-- drop, accept, or reject packets.
+
+spdStaticActions OBJECT IDENTIFIER ::= { spdConfigObjects 13 }
+
+spdDropAction    OBJECT-TYPE
+    SYNTAX      Integer32 (1)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This scalar indicates that a packet MUST be dropped
+         and SHOULD NOT have action/packet logging."
+    ::= { spdStaticActions 1 }
+
+spdDropActionLog OBJECT-TYPE
+    SYNTAX      Integer32 (1)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This scalar indicates that a packet MUST be dropped
+         and SHOULD have action/packet logging."
+    ::= { spdStaticActions 2 }
+
+spdAcceptAction OBJECT-TYPE
+    SYNTAX      Integer32 (1)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This Scalar indicates that a packet MUST be accepted
+         (pass-through) and SHOULD NOT have action/packet logging."
+    ::= { spdStaticActions 3 }
+
+spdAcceptActionLog OBJECT-TYPE
+    SYNTAX      Integer32 (1)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This scalar indicates that a packet MUST be accepted
+         (pass-through) and SHOULD have action/packet logging."
+    ::= { spdStaticActions 4 }
+
+--
+--
+-- Notification objects information
+--
+--
+
+spdNotificationVariables OBJECT IDENTIFIER ::=
+   { spdNotificationObjects 1 }
+
+spdNotifications OBJECT IDENTIFIER ::=
+   { spdNotificationObjects 0 }
+
+spdActionExecuted OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Points to the action instance that was executed that
+         resulted in the notification being sent."
+    ::= { spdNotificationVariables 1 }
+
+spdIPEndpointAddType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Contains the address type for the interface that the
+         notification triggering packet is passing through."
+    ::= { spdNotificationVariables 2 }
+
+spdIPEndpointAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Contains the interface address for the interface that the
+         notification triggering packet is passing through.
+
+         The format of this object is specified by the
+         spdIPEndpointAddType object."
+    ::= { spdNotificationVariables 3 }
+
+spdIPSourceType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Contains the source address type of the packet that
+
+         triggered the notification."
+    ::= { spdNotificationVariables 4 }
+
+spdIPSourceAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Contains the source address of the packet that
+         triggered the notification.
+
+         The format of this object is specified by the
+         spdIPSourceType object."
+    ::= { spdNotificationVariables 5 }
+
+spdIPDestinationType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Contains the destination address type of the packet
+         that triggered the notification."
+    ::= { spdNotificationVariables 6 }
+
+spdIPDestinationAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Contains the destination address of the packet that
+         triggered the notification.
+
+         The format of this object is specified by the
+         spdIPDestinationType object."
+    ::= { spdNotificationVariables 7 }
+
+spdPacketDirection OBJECT-TYPE
+    SYNTAX      IfDirection
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "Indicates if the packet that triggered the action in
+         questions was ingress (inbound) or egress (outbound)."
+    ::= { spdNotificationVariables 8 }
+
+spdPacketPart OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..65535))
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "spdPacketPart is the front part of the full IP packet that
+         triggered this notification.  The initial size limit is
+         determined by the smaller of the size, indicated by:
+
+         I.  The value of the object with the TC syntax
+             'SpdIPPacketLogging' that indicated the packet SHOULD be
+             logged and
+
+         II. The size of the triggering packet.
+
+         The final limit is determined by the SNMP packet size when
+         sending the notification.  The maximum size that can be
+         included will be the smaller of the initial size, given the
+         above, and the length that will fit in a single SNMP
+         notification packet after the rest of the notification's
+         objects and any other necessary packet data (headers encoding,
+         etc.) have been included in the packet."
+    ::= { spdNotificationVariables 9 }
+
+spdActionNotification NOTIFICATION-TYPE
+    OBJECTS { spdActionExecuted, spdIPEndpointAddType,
+              spdIPEndpointAddress,
+              spdIPSourceType, spdIPSourceAddress,
+              spdIPDestinationType,
+              spdIPDestinationAddress,
+              spdPacketDirection }
+    STATUS  current
+    DESCRIPTION
+        "Notification that an action was executed by a rule.
+         Only actions with logging enabled will result in this
+         notification getting sent.  The object includes the
+         spdActionExecuted object, which will indicate which action
+         was executed within the scope of the rule.  Additionally,
+         the spdIPSourceType, spdIPSourceAddress,
+         spdIPDestinationType, and spdIPDestinationAddress objects
+         are included to indicate the packet source and destination
+         of the packet that triggered the action.  Finally, the
+         spdIPEndpointAddType, spdIPEndpointAddress, and
+         spdPacketDirection objects indicate which interface the
+         executed action was associated with, and if the packet was
+         ingress or egress through the endpoint.
+
+         A spdActionNotification SHOULD be limited to a maximum of
+         one notification sent per minute for any action
+         notifications that do not have any other configuration
+         controlling their send rate.
+
+         Note that compound actions with multiple executed
+         sub-actions may result in multiple notifications being sent
+         from a single rule execution."
+    ::= { spdNotifications 1 }
+
+spdPacketNotification NOTIFICATION-TYPE
+    OBJECTS { spdActionExecuted, spdIPEndpointAddType,
+              spdIPEndpointAddress,
+              spdIPSourceType, spdIPSourceAddress,
+              spdIPDestinationType,
+              spdIPDestinationAddress,
+              spdPacketDirection,
+              spdPacketPart }
+    STATUS  current
+    DESCRIPTION
+        "Notification that a packet passed through a Security
+         Association (SA).  Only SAs created by actions with packet
+         logging enabled will result in this notification getting
+         sent.  The objects sent MUST include the spdActionExecuted,
+         which will indicate which action was executed within the
+         scope of the rule.  Additionally, the spdIPSourceType,
+         spdIPSourceAddress, spdIPDestinationType, and
+         spdIPDestinationAddress objects MUST be included to
+         indicate the packet source and destination of the packet
+         that triggered the action.  The spdIPEndpointAddType,
+         spdIPEndpointAddress, and spdPacketDirection objects are
+         included to indicate which endpoint the packet was
+         associated with.  Finally, spdPacketPart is included to
+         enable sending a variable sized part of the front of the
+         packet with the size dependent on the value of the object of
+         TC syntax 'SpdIPPacketLogging', which indicated that logging
+         should be done.
+
+         A spdPacketNotification SHOULD be limited to a maximum of
+         one notification sent per minute for any action
+         notifications that do not have any other configuration
+         controlling their send rate.
+
+         An action notification SHOULD be limited to a maximum of
+         one notification sent per minute for any action
+         notifications that do not have any other configuration
+         controlling their send rate."
+    ::= { spdNotifications 2 }
+
+--
+--
+-- Conformance information
+
+--
+--
+
+spdCompliances OBJECT IDENTIFIER
+    ::= { spdConformanceObjects 1 }
+spdGroups OBJECT IDENTIFIER
+    ::= { spdConformanceObjects 2 }
+
+--
+-- Compliance statements
+--
+--
+spdRuleFilterFullCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities that include
+         an IPsec MIB implementation with Endpoint, Rules, and
+         filters support.
+
+         When this MIB is implemented with support for read-create,
+         then such an implementation can claim full compliance.  Such
+         devices can then be both monitored and configured with this
+         MIB."
+
+    MODULE -- This Module
+        MANDATORY-GROUPS { spdEndpointGroup,
+                           spdGroupContentsGroup,
+                           spdRuleDefinitionGroup,
+                           spdStaticFilterGroup,
+                           spdStaticActionGroup ,
+                           diffServMIBMultiFieldClfrGroup }
+
+        GROUP spdIpsecSystemPolicyNameGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support a system policy group
+             name."
+
+        GROUP spdCompoundFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support compound filters."
+
+        GROUP spdIPOffsetFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support IP Offset filters.  In
+             general, this SHOULD be supported by a compliant IPsec
+
+             Policy implementation."
+
+        GROUP spdTimeFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support time filters."
+
+        GROUP spdIpsoHeaderFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support IPSO Header filters."
+
+        GROUP  spdCompoundActionGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support compound actions."
+
+        OBJECT      spdEndGroupLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdGroupContComponentType
+        SYNTAX      INTEGER {
+                rule(2)
+        }
+        DESCRIPTION
+            "Support of the value group(1) is only required for
+             implementations that support Policy Groups within
+             Policy Groups."
+
+        OBJECT      spdGroupContLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdRuleDefLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdCompFiltLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdSubFiltLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+             "This object not required for compliance."
+
+        OBJECT      spdIpOffFiltLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdTimeFiltLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdIpsoHeadFiltLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdCompActLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      spdSubActLastChanged
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object not required for compliance."
+
+        OBJECT      diffServMultiFieldClfrNextFree
+        MIN-ACCESS  not-accessible
+        DESCRIPTION
+            "This object is not required for compliance."
+    ::= { spdCompliances 1 }
+
+spdLoggingCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities that support
+         sending notifications when actions are invoked."
+    MODULE -- This Module
+        MANDATORY-GROUPS { spdActionLoggingObjectGroup,
+                           spdActionNotificationGroup }
+    ::= { spdCompliances 2 }
+
+--
+
+-- ReadOnly Compliances
+--
+spdRuleFilterReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities that include
+         an IPsec MIB implementation with Endpoint, Rules, and
+         filters support.
+
+         If this MIB is implemented without support for read-create
+         (i.e., in read-only), it is not in full compliance, but it
+         can claim read-only compliance.  Such a device can then be
+         monitored, but cannot be configured with this MIB."
+
+    MODULE -- This Module
+        MANDATORY-GROUPS { spdEndpointGroup,
+                           spdGroupContentsGroup,
+                           spdRuleDefinitionGroup,
+                           spdStaticFilterGroup,
+                           spdStaticActionGroup ,
+                           diffServMIBMultiFieldClfrGroup }
+
+        GROUP spdIpsecSystemPolicyNameGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support a system policy group
+             name."
+
+        GROUP spdCompoundFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support compound filters."
+
+        GROUP spdIPOffsetFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support IP Offset filters.  In
+             general, this SHOULD be supported by a compliant IPsec
+             Policy implementation."
+
+        GROUP spdTimeFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support time filters."
+
+        GROUP spdIpsoHeaderFilterGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+
+             implementations that support IPSO Header filters."
+
+        GROUP  spdCompoundActionGroup
+        DESCRIPTION
+            "This group is mandatory for IPsec Policy
+             implementations that support compound actions."
+
+        OBJECT       spdCompActExecutionStrategy
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdCompActLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdCompActRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdCompActStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdCompFiltDescription
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdCompFiltLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdCompFiltLogicType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdCompFiltRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdCompFiltStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdEgressPolicyGroupName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdEndGroupLastChanged
+        DESCRIPTION
+           "This object is not required for compliance."
+
+        OBJECT       spdEndGroupName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdEndGroupRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdEndGroupStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdGroupContComponentName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdGroupContComponentType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdGroupContFilter
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdGroupContLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdGroupContRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdGroupContStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIngressPolicyGroupName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpOffFiltLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdIpOffFiltOffset
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpOffFiltRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpOffFiltStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpOffFiltType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpOffFiltValue
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpsoHeadFiltClassification
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpsoHeadFiltLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdIpsoHeadFiltProtectionAuth
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpsoHeadFiltRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpsoHeadFiltStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdIpsoHeadFiltType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefAction
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefAdminStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefDescription
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefFilter
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefFilterNegated
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdRuleDefRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdRuleDefStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubActLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdSubActRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubActStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubActSubActionName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubFiltLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdSubFiltRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubFiltStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubFiltSubfilter
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdSubFiltSubfilterIsNegated
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltDayOfMonthMask
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltDayOfWeekMask
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltLastChanged
+        DESCRIPTION
+            "This object is not required for compliance."
+
+        OBJECT       spdTimeFiltMonthOfYearMask
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltPeriod
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltTimeOfDayMask
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       spdTimeFiltStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { spdCompliances 3 }
+
+--
+--
+-- Compliance Groups Definitions
+--
+
+--
+-- Endpoint, Rule, Filter Compliance Groups
+--
+
+spdEndpointGroup OBJECT-GROUP
+    OBJECTS {
+        spdEndGroupName, spdEndGroupLastChanged,
+        spdEndGroupStorageType, spdEndGroupRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy
+         Endpoint Table."
+    ::= { spdGroups 1 }
+
+spdGroupContentsGroup OBJECT-GROUP
+    OBJECTS {
+        spdGroupContComponentType, spdGroupContFilter,
+        spdGroupContComponentName, spdGroupContLastChanged,
+        spdGroupContStorageType, spdGroupContRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy
+         Group Contents Table."
+    ::= { spdGroups 2 }
+
+spdIpsecSystemPolicyNameGroup OBJECT-GROUP
+    OBJECTS {
+        spdIngressPolicyGroupName,
+        spdEgressPolicyGroupName
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects represent the System
+         Policy Group Names."
+    ::= { spdGroups 3}
+
+spdRuleDefinitionGroup OBJECT-GROUP
+    OBJECTS {
+        spdRuleDefDescription, spdRuleDefFilter,
+        spdRuleDefFilterNegated, spdRuleDefAction,
+        spdRuleDefAdminStatus, spdRuleDefLastChanged,
+        spdRuleDefStorageType, spdRuleDefRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy Rule
+        Definition Table."
+    ::= { spdGroups 4 }
+
+spdCompoundFilterGroup OBJECT-GROUP
+    OBJECTS {
+        spdCompFiltDescription, spdCompFiltLogicType,
+        spdCompFiltLastChanged, spdCompFiltStorageType,
+        spdCompFiltRowStatus, spdSubFiltSubfilter,
+        spdSubFiltSubfilterIsNegated, spdSubFiltLastChanged,
+        spdSubFiltStorageType, spdSubFiltRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy
+         Compound Filter Table and Sub-Filter Table Group."
+    ::= { spdGroups 5 }
+
+spdStaticFilterGroup OBJECT-GROUP
+        OBJECTS { spdTrueFilter }
+     STATUS current
+     DESCRIPTION
+         "The static filter group.  Currently this is just a true
+          filter."
+    ::= { spdGroups 6 }
+
+spdIPOffsetFilterGroup OBJECT-GROUP
+    OBJECTS {
+        spdIpOffFiltOffset, spdIpOffFiltType,
+        spdIpOffFiltValue, spdIpOffFiltLastChanged,
+        spdIpOffFiltStorageType, spdIpOffFiltRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy IP
+         Offset Filter Table."
+    ::= { spdGroups 7 }
+
+spdTimeFilterGroup OBJECT-GROUP
+    OBJECTS {
+        spdTimeFiltPeriod,
+        spdTimeFiltMonthOfYearMask, spdTimeFiltDayOfMonthMask,
+        spdTimeFiltDayOfWeekMask, spdTimeFiltTimeOfDayMask,
+        spdTimeFiltLastChanged,
+        spdTimeFiltStorageType, spdTimeFiltRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy Time
+         Filter Table."
+    ::= { spdGroups 8 }
+
+spdIpsoHeaderFilterGroup OBJECT-GROUP
+    OBJECTS {
+        spdIpsoHeadFiltType, spdIpsoHeadFiltClassification,
+        spdIpsoHeadFiltProtectionAuth, spdIpsoHeadFiltLastChanged,
+        spdIpsoHeadFiltStorageType, spdIpsoHeadFiltRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy IPSO
+         Header Filter Table."
+    ::= { spdGroups 9 }
+
+--
+-- action compliance groups
+--
+
+spdStaticActionGroup OBJECT-GROUP
+    OBJECTS {
+        spdDropAction, spdAcceptAction,
+        spdDropActionLog, spdAcceptActionLog
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of objects from the IPsec Policy
+         Static Actions."
+    ::= { spdGroups 10 }
+
+spdCompoundActionGroup OBJECT-GROUP
+    OBJECTS {
+        spdCompActExecutionStrategy, spdCompActLastChanged,
+        spdCompActStorageType,
+        spdCompActRowStatus, spdSubActSubActionName,
+        spdSubActLastChanged, spdSubActStorageType,
+        spdSubActRowStatus
+    }
+    STATUS current
+    DESCRIPTION
+        "The IPsec Policy Compound Action Table and Actions In
+
+         Compound Action Table Group."
+    ::= { spdGroups 11 }
+
+spdActionLoggingObjectGroup OBJECT-GROUP
+    OBJECTS {
+        spdActionExecuted,
+        spdIPEndpointAddType,   spdIPEndpointAddress,
+        spdIPSourceType,        spdIPSourceAddress,
+        spdIPDestinationType,   spdIPDestinationAddress,
+        spdPacketDirection,     spdPacketPart
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of all the Notification objects for
+        this MIB."
+    ::= { spdGroups 12 }
+
+spdActionNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        spdActionNotification,
+        spdPacketNotification
+    }
+    STATUS current
+    DESCRIPTION
+        "This group is made up of all the Notifications for this MIB."
+    ::= { spdGroups 13 }
+
+END
diff --git a/snmp_builder/mibs/IPV6-FLOW-LABEL-MIB.mib b/snmp_builder/mibs/IPV6-FLOW-LABEL-MIB.mib
new file mode 100644
index 0000000..6fb3659
--- /dev/null
+++ b/snmp_builder/mibs/IPV6-FLOW-LABEL-MIB.mib
@@ -0,0 +1,58 @@
+IPV6-FLOW-LABEL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+    MODULE-IDENTITY, mib-2, Integer32           FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                          FROM SNMPv2-TC;
+
+ipv6FlowLabelMIB   MODULE-IDENTITY
+
+    LAST-UPDATED  "200308280000Z"  -- 28 August 2003
+    ORGANIZATION  "IETF Operations and Management Area"
+    CONTACT-INFO  "Bert Wijnen (Editor)
+                   Lucent Technologies
+                   Schagen 33
+                   3461 GL Linschoten
+                   Netherlands
+
+                   Phone: +31 348-407-775
+                   EMail: bwijnen@lucent.com
+
+                   Send comments to <mibs@ops.ietf.org>.
+                  "
+    DESCRIPTION   "This MIB module provides commonly used textual
+                   conventions for IPv6 Flow Labels.
+
+                   Copyright (C) The Internet Society (2003).  This
+                   version of this MIB module is part of RFC 3595,
+                   see the RFC itself for full legal notices.
+                  "
+    -- Revision History
+
+    REVISION      "200308280000Z"  -- 28 August 2003
+    DESCRIPTION   "Initial version, published as RFC 3595."
+    ::= { mib-2 103 }
+
+IPv6FlowLabel      ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS         current
+    DESCRIPTION   "The flow identifier or Flow Label in an IPv6
+                   packet header that may be used to discriminate
+                   traffic flows.
+                  "
+    REFERENCE     "Internet Protocol, Version 6 (IPv6) specification,
+                   section 6.  RFC 2460.
+                  "
+    SYNTAX         Integer32 (0..1048575)
+
+IPv6FlowLabelOrAny ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS         current
+    DESCRIPTION   "The flow identifier or Flow Label in an IPv6
+                   packet header that may be used to discriminate
+                   traffic flows.  The value of -1 is used to
+                   indicate a wildcard, i.e. any value.
+                  "
+    SYNTAX         Integer32 (-1 | 0..1048575)
+
+END
diff --git a/snmp_builder/mibs/IPV6-ICMP-MIB.mib b/snmp_builder/mibs/IPV6-ICMP-MIB.mib
new file mode 100644
index 0000000..bb66da5
--- /dev/null
+++ b/snmp_builder/mibs/IPV6-ICMP-MIB.mib
@@ -0,0 +1,529 @@
+ IPV6-ICMP-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE,
+     Counter32, mib-2                 FROM SNMPv2-SMI
+     MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
+     ipv6IfEntry                      FROM IPV6-MIB;
+
+ ipv6IcmpMIB MODULE-IDENTITY
+     LAST-UPDATED "9801082155Z"
+     ORGANIZATION "IETF IPv6 Working Group"
+     CONTACT-INFO
+       "           Dimitry Haskin
+
+           Postal: Bay Networks, Inc.
+                   660 Techology Park Drive.
+                   Billerica, MA  01821
+                   US
+
+              Tel: +1-978-916-8124
+           E-mail: dhaskin@baynetworks.com
+
+                   Steve Onishi
+
+           Postal: Bay Networks, Inc.
+                   3 Federal Street
+                   Billerica, MA 01821
+                   US
+
+              Tel: +1-978-916-3816
+           E-mail: sonishi@baynetworks.com"
+     DESCRIPTION
+       "The MIB module for entities implementing
+        the ICMPv6."
+     ::= { mib-2 56 }
+
+ -- the ICMPv6 group
+
+ ipv6IcmpMIBObjects OBJECT IDENTIFIER ::= { ipv6IcmpMIB  1 }
+
+ -- Per-interface ICMPv6 statistics table
+
+ ipv6IfIcmpTable OBJECT-TYPE
+     SYNTAX     SEQUENCE OF Ipv6IfIcmpEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+      "IPv6 ICMP statistics. This table contains statistics
+      of ICMPv6 messages that are received and sourced by
+      the entity."
+     ::= { ipv6IcmpMIBObjects 1 }
+
+ ipv6IfIcmpEntry OBJECT-TYPE
+     SYNTAX     Ipv6IfIcmpEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+      "An ICMPv6 statistics entry containing
+      objects at a particular IPv6 interface.
+
+      Note that a receiving interface is
+      the interface to which a given ICMPv6 message
+      is addressed which may not be necessarily
+      the input interface for the message.
+
+      Similarly,  the sending interface is
+      the interface that sources a given
+      ICMP message which is usually but not
+      necessarily the output interface for the message."
+     AUGMENTS { ipv6IfEntry }
+     ::= { ipv6IfIcmpTable 1 }
+
+ Ipv6IfIcmpEntry ::= SEQUENCE {
+         ipv6IfIcmpInMsgs
+               Counter32      ,
+         ipv6IfIcmpInErrors
+               Counter32      ,
+         ipv6IfIcmpInDestUnreachs
+               Counter32      ,
+         ipv6IfIcmpInAdminProhibs
+               Counter32      ,
+         ipv6IfIcmpInTimeExcds
+               Counter32      ,
+         ipv6IfIcmpInParmProblems
+               Counter32      ,
+         ipv6IfIcmpInPktTooBigs
+               Counter32      ,
+         ipv6IfIcmpInEchos
+               Counter32      ,
+         ipv6IfIcmpInEchoReplies
+               Counter32      ,
+         ipv6IfIcmpInRouterSolicits
+               Counter32      ,
+         ipv6IfIcmpInRouterAdvertisements
+               Counter32      ,
+         ipv6IfIcmpInNeighborSolicits
+               Counter32      ,
+         ipv6IfIcmpInNeighborAdvertisements
+               Counter32      ,
+         ipv6IfIcmpInRedirects
+               Counter32      ,
+         ipv6IfIcmpInGroupMembQueries
+               Counter32      ,
+         ipv6IfIcmpInGroupMembResponses
+               Counter32      ,
+         ipv6IfIcmpInGroupMembReductions
+               Counter32      ,
+         ipv6IfIcmpOutMsgs
+               Counter32      ,
+         ipv6IfIcmpOutErrors
+               Counter32      ,
+         ipv6IfIcmpOutDestUnreachs
+               Counter32      ,
+         ipv6IfIcmpOutAdminProhibs
+               Counter32      ,
+         ipv6IfIcmpOutTimeExcds
+               Counter32      ,
+         ipv6IfIcmpOutParmProblems
+               Counter32      ,
+         ipv6IfIcmpOutPktTooBigs
+               Counter32      ,
+         ipv6IfIcmpOutEchos
+               Counter32      ,
+         ipv6IfIcmpOutEchoReplies
+               Counter32      ,
+         ipv6IfIcmpOutRouterSolicits
+               Counter32      ,
+         ipv6IfIcmpOutRouterAdvertisements
+               Counter32      ,
+         ipv6IfIcmpOutNeighborSolicits
+               Counter32      ,
+         ipv6IfIcmpOutNeighborAdvertisements
+               Counter32      ,
+         ipv6IfIcmpOutRedirects
+               Counter32      ,
+         ipv6IfIcmpOutGroupMembQueries
+               Counter32      ,
+         ipv6IfIcmpOutGroupMembResponses
+               Counter32      ,
+         ipv6IfIcmpOutGroupMembReductions
+               Counter32
+
+     }
+
+ ipv6IfIcmpInMsgs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The total number of ICMP messages received
+      by the interface which includes all those
+      counted by ipv6IfIcmpInErrors. Note that this
+      interface is the interface to which the
+      ICMP messages were addressed which may not be
+      necessarily the input interface for the messages."
+     ::= { ipv6IfIcmpEntry 1 }
+
+ ipv6IfIcmpInErrors OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP messages which the interface
+      received but determined as having ICMP-specific
+      errors (bad ICMP checksums, bad length, etc.)."
+     ::= { ipv6IfIcmpEntry 2 }
+
+ ipv6IfIcmpInDestUnreachs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Destination Unreachable
+      messages received by the interface."
+     ::= { ipv6IfIcmpEntry 3 }
+
+ ipv6IfIcmpInAdminProhibs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP destination
+      unreachable/communication administratively
+      prohibited messages received by the interface."
+     ::= { ipv6IfIcmpEntry 4 }
+
+ ipv6IfIcmpInTimeExcds OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Time Exceeded messages
+       received by the interface."
+     ::= { ipv6IfIcmpEntry 5 }
+
+ ipv6IfIcmpInParmProblems OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Parameter Problem messages
+       received by the interface."
+     ::= { ipv6IfIcmpEntry 6 }
+
+ ipv6IfIcmpInPktTooBigs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Packet Too Big messages
+      received by the interface."
+     ::= { ipv6IfIcmpEntry 7 }
+
+ ipv6IfIcmpInEchos OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Echo (request) messages
+       received by the interface."
+     ::= { ipv6IfIcmpEntry 8 }
+
+ ipv6IfIcmpInEchoReplies OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Echo Reply messages received
+      by the interface."
+     ::= { ipv6IfIcmpEntry 9 }
+
+ ipv6IfIcmpInRouterSolicits OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Router Solicit messages
+       received by the interface."
+     ::= { ipv6IfIcmpEntry 10 }
+
+ ipv6IfIcmpInRouterAdvertisements OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Router Advertisement messages
+      received by the interface."
+     ::= { ipv6IfIcmpEntry 11 }
+
+ ipv6IfIcmpInNeighborSolicits OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Neighbor Solicit messages
+       received by the interface."
+     ::= { ipv6IfIcmpEntry 12 }
+
+ ipv6IfIcmpInNeighborAdvertisements OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Neighbor Advertisement
+      messages received by the interface."
+     ::= { ipv6IfIcmpEntry 13 }
+
+ ipv6IfIcmpInRedirects OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of Redirect messages received
+      by the interface."
+     ::= { ipv6IfIcmpEntry 14 }
+
+ ipv6IfIcmpInGroupMembQueries OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMPv6 Group Membership Query
+      messages received by the interface."
+     ::= { ipv6IfIcmpEntry 15}
+
+ ipv6IfIcmpInGroupMembResponses OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMPv6 Group Membership Response messages
+      received by the interface."
+     ::= { ipv6IfIcmpEntry 16}
+
+  ipv6IfIcmpInGroupMembReductions OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMPv6 Group Membership Reduction messages
+      received by the interface."
+     ::= { ipv6IfIcmpEntry 17}
+
+ ipv6IfIcmpOutMsgs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The total number of ICMP messages which this
+      interface attempted to send.  Note that this counter
+      includes all those counted by icmpOutErrors."
+     ::= { ipv6IfIcmpEntry 18 }
+
+ ipv6IfIcmpOutErrors OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP messages which this interface did
+      not send due to problems discovered within ICMP
+      such as a lack of buffers.  This value should not
+      include errors discovered outside the ICMP layer
+      such as the inability of IPv6 to route the resultant
+      datagram.  In some implementations there may be no
+      types of error which contribute to this counter's
+      value."
+     ::= { ipv6IfIcmpEntry 19 }
+
+ ipv6IfIcmpOutDestUnreachs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Destination Unreachable
+
+      messages sent by the interface."
+     ::= { ipv6IfIcmpEntry 20 }
+
+ ipv6IfIcmpOutAdminProhibs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+       "Number of ICMP dest unreachable/communication
+       administratively prohibited messages sent."
+     ::= { ipv6IfIcmpEntry 21 }
+
+ ipv6IfIcmpOutTimeExcds OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Time Exceeded messages sent
+      by the interface."
+     ::= { ipv6IfIcmpEntry 22 }
+
+ ipv6IfIcmpOutParmProblems OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Parameter Problem messages
+      sent by the interface."
+     ::= { ipv6IfIcmpEntry 23 }
+
+ ipv6IfIcmpOutPktTooBigs OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Packet Too Big messages sent
+      by the interface."
+     ::= { ipv6IfIcmpEntry 24 }
+
+ ipv6IfIcmpOutEchos OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Echo (request) messages sent
+      by the interface."
+     ::= { ipv6IfIcmpEntry 25 }
+
+ ipv6IfIcmpOutEchoReplies OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Echo Reply messages sent
+      by the interface."
+     ::= { ipv6IfIcmpEntry 26 }
+
+ ipv6IfIcmpOutRouterSolicits OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Router Solicitation messages
+       sent by the interface."
+     ::= { ipv6IfIcmpEntry 27 }
+
+ ipv6IfIcmpOutRouterAdvertisements OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Router Advertisement messages
+      sent by the interface."
+     ::= { ipv6IfIcmpEntry 28 }
+
+ ipv6IfIcmpOutNeighborSolicits OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Neighbor Solicitation
+       messages sent by the interface."
+     ::= { ipv6IfIcmpEntry 29 }
+
+ ipv6IfIcmpOutNeighborAdvertisements OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMP Neighbor Advertisement
+      messages sent by the interface."
+     ::= { ipv6IfIcmpEntry 30 }
+
+ ipv6IfIcmpOutRedirects OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of Redirect messages sent. For
+      a host, this object will always be zero,
+      since hosts do not send redirects."
+     ::= { ipv6IfIcmpEntry 31 }
+
+ ipv6IfIcmpOutGroupMembQueries OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMPv6 Group Membership Query
+      messages sent."
+     ::= { ipv6IfIcmpEntry 32}
+
+ ipv6IfIcmpOutGroupMembResponses OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMPv6 Group Membership Response
+      messages sent."
+     ::= { ipv6IfIcmpEntry 33}
+
+ ipv6IfIcmpOutGroupMembReductions OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The number of ICMPv6 Group Membership Reduction
+      messages sent."
+     ::= { ipv6IfIcmpEntry 34}
+
+-- conformance information
+
+ipv6IcmpConformance OBJECT IDENTIFIER ::= { ipv6IcmpMIB 2 }
+
+ipv6IcmpCompliances
+        OBJECT IDENTIFIER ::= { ipv6IcmpConformance 1 }
+ipv6IcmpGroups
+        OBJECT IDENTIFIER ::= { ipv6IcmpConformance 2 }
+
+-- compliance statements
+
+ipv6IcmpCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+      "The compliance statement for SNMPv2 entities which
+      implement ICMPv6."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ipv6IcmpGroup }
+    ::= { ipv6IcmpCompliances 1 }
+
+ipv6IcmpGroup OBJECT-GROUP
+    OBJECTS   {
+                ipv6IfIcmpInMsgs,
+                ipv6IfIcmpInErrors,
+                ipv6IfIcmpInDestUnreachs,
+                ipv6IfIcmpInAdminProhibs,
+                ipv6IfIcmpInTimeExcds,
+                ipv6IfIcmpInParmProblems,
+                ipv6IfIcmpInPktTooBigs,
+                ipv6IfIcmpInEchos,
+                ipv6IfIcmpInEchoReplies,
+                ipv6IfIcmpInRouterSolicits,
+                ipv6IfIcmpInRouterAdvertisements,
+                ipv6IfIcmpInNeighborSolicits,
+                ipv6IfIcmpInNeighborAdvertisements,
+                ipv6IfIcmpInRedirects,
+                ipv6IfIcmpInGroupMembQueries,
+                ipv6IfIcmpInGroupMembResponses,
+                ipv6IfIcmpInGroupMembReductions,
+                ipv6IfIcmpOutMsgs,
+                ipv6IfIcmpOutErrors,
+                ipv6IfIcmpOutDestUnreachs,
+                ipv6IfIcmpOutAdminProhibs,
+                ipv6IfIcmpOutTimeExcds,
+                ipv6IfIcmpOutParmProblems,
+                ipv6IfIcmpOutPktTooBigs,
+                ipv6IfIcmpOutEchos,
+                ipv6IfIcmpOutEchoReplies,
+                ipv6IfIcmpOutRouterSolicits,
+                ipv6IfIcmpOutRouterAdvertisements,
+                ipv6IfIcmpOutNeighborSolicits,
+                ipv6IfIcmpOutNeighborAdvertisements,
+                ipv6IfIcmpOutRedirects,
+                ipv6IfIcmpOutGroupMembQueries,
+                ipv6IfIcmpOutGroupMembResponses,
+                ipv6IfIcmpOutGroupMembReductions
+              }
+    STATUS    current
+    DESCRIPTION
+         "The ICMPv6 group of objects providing information
+          specific to ICMPv6."
+    ::= { ipv6IcmpGroups 1 }
+
+ END
diff --git a/snmp_builder/mibs/IPV6-MIB.mib b/snmp_builder/mibs/IPV6-MIB.mib
new file mode 100644
index 0000000..6957af2
--- /dev/null
+++ b/snmp_builder/mibs/IPV6-MIB.mib
@@ -0,0 +1,1443 @@
+ IPV6-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+     mib-2, Counter32, Unsigned32, Integer32,
+     Gauge32                               FROM SNMPv2-SMI
+     DisplayString, PhysAddress, TruthValue, TimeStamp,
+     VariablePointer, RowPointer           FROM SNMPv2-TC
+     MODULE-COMPLIANCE, OBJECT-GROUP,
+     NOTIFICATION-GROUP                    FROM SNMPv2-CONF
+     Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix,
+     Ipv6AddressIfIdentifier,
+     Ipv6IfIndexOrZero                     FROM IPV6-TC;
+
+ ipv6MIB MODULE-IDENTITY
+     LAST-UPDATED "9802052155Z"
+     ORGANIZATION "IETF IPv6 Working Group"
+     CONTACT-INFO
+       "           Dimitry Haskin
+
+           Postal: Bay Networks, Inc.
+                   660 Techology Park Drive.
+                   Billerica, MA  01821
+
+                   US
+
+              Tel: +1-978-916-8124
+           E-mail: dhaskin@baynetworks.com
+
+                   Steve Onishi
+
+           Postal: Bay Networks, Inc.
+                   3 Federal Street
+                   Billerica, MA 01821
+                   US
+
+              Tel: +1-978-916-3816
+           E-mail: sonishi@baynetworks.com"
+     DESCRIPTION
+       "The MIB module for entities implementing the IPv6
+        protocol."
+     ::= { mib-2 55 }
+
+ -- the IPv6 general group
+
+ ipv6MIBObjects OBJECT IDENTIFIER   ::= { ipv6MIB 1 }
+
+ ipv6Forwarding OBJECT-TYPE
+     SYNTAX      INTEGER {
+                  forwarding(1),    -- acting as a router
+
+                                    -- NOT acting as
+                  notForwarding(2)  -- a router
+                 }
+      MAX-ACCESS read-write
+      STATUS     current
+      DESCRIPTION
+        "The indication of whether this entity is acting
+        as an IPv6 router in respect to the forwarding of
+        datagrams received by, but not addressed to, this
+        entity.  IPv6 routers forward datagrams.  IPv6
+        hosts do not (except those source-routed via the
+        host).
+
+        Note that for some managed nodes, this object may
+        take on only a subset of the values possible.
+        Accordingly, it is appropriate for an agent to
+        return a `wrongValue' response if a management
+        station attempts to change this object to an
+        inappropriate value."
+      ::= { ipv6MIBObjects 1 }
+
+ ipv6DefaultHopLimit OBJECT-TYPE
+     SYNTAX      INTEGER(0..255)
+     MAX-ACCESS  read-write
+      STATUS     current
+     DESCRIPTION
+        "The default value inserted into the Hop Limit
+        field of the IPv6 header of datagrams originated
+        at this entity, whenever a Hop Limit value is not
+        supplied by the transport layer protocol."
+     DEFVAL  { 64 }
+     ::= { ipv6MIBObjects 2 }
+
+ipv6Interfaces OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of IPv6 interfaces (regardless of
+        their current state) present on this system."
+     ::= { ipv6MIBObjects 3 }
+
+ipv6IfTableLastChange OBJECT-TYPE
+     SYNTAX      TimeStamp
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The value of sysUpTime at the time of the last
+       insertion or removal of an entry in the
+       ipv6IfTable. If the number of entries has been
+       unchanged since the last re-initialization of
+       the local network management subsystem, then this
+       object contains a zero value."
+     ::= { ipv6MIBObjects 4 }
+
+-- the IPv6 Interfaces table
+
+ipv6IfTable OBJECT-TYPE
+     SYNTAX     SEQUENCE OF Ipv6IfEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "The IPv6 Interfaces table contains information
+       on the entity's internetwork-layer interfaces.
+       An IPv6 interface constitutes a logical network
+       layer attachment to the layer immediately below
+
+       IPv6 including internet layer 'tunnels', such as
+       tunnels over IPv4 or IPv6 itself."
+     ::= { ipv6MIBObjects 5 }
+
+ ipv6IfEntry OBJECT-TYPE
+     SYNTAX     Ipv6IfEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "An interface entry containing objects
+        about a particular IPv6 interface."
+     INDEX   { ipv6IfIndex }
+     ::= { ipv6IfTable 1 }
+
+ Ipv6IfEntry ::= SEQUENCE {
+         ipv6IfIndex              Ipv6IfIndex,
+         ipv6IfDescr              DisplayString,
+         ipv6IfLowerLayer         VariablePointer,
+         ipv6IfEffectiveMtu       Unsigned32,
+         ipv6IfReasmMaxSize       Unsigned32,
+         ipv6IfIdentifier         Ipv6AddressIfIdentifier,
+         ipv6IfIdentifierLength   INTEGER,
+         ipv6IfPhysicalAddress    PhysAddress,
+         ipv6IfAdminStatus        INTEGER,
+         ipv6IfOperStatus         INTEGER,
+         ipv6IfLastChange         TimeStamp
+     }
+
+ ipv6IfIndex OBJECT-TYPE
+     SYNTAX     Ipv6IfIndex
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "A unique non-zero value identifying
+        the particular IPv6 interface."
+     ::= { ipv6IfEntry 1 }
+
+ ipv6IfDescr OBJECT-TYPE
+     SYNTAX     DisplayString
+     MAX-ACCESS read-write
+     STATUS     current
+     DESCRIPTION
+       "A textual string containing information about the
+       interface.  This string may be set by the network
+       management system."
+     ::= { ipv6IfEntry 2 }
+
+ ipv6IfLowerLayer OBJECT-TYPE
+    SYNTAX      VariablePointer
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "This object identifies the protocol layer over
+       which this network interface operates.  If this
+       network interface operates over the data-link
+       layer, then the value of this object refers to an
+       instance of ifIndex [6]. If this network interface
+       operates over an IPv4 interface, the value of this
+       object refers to an instance of ipAdEntAddr [3].
+
+       If this network interface operates over another
+       IPv6 interface, the value of this object refers to
+       an instance of ipv6IfIndex.  If this network
+       interface is not currently operating over an active
+       protocol layer, then the value of this object
+       should be set to the OBJECT ID { 0 0 }."
+    ::= { ipv6IfEntry 3 }
+
+ ipv6IfEffectiveMtu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The size of the largest IPv6 packet which can be
+      sent/received on the interface, specified in
+      octets."
+ ::= { ipv6IfEntry 4 }
+
+ ipv6IfReasmMaxSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The size of the largest IPv6 datagram which this
+      entity can re-assemble from incoming IPv6 fragmented
+      datagrams received on this interface."
+ ::= { ipv6IfEntry 5 }
+
+ ipv6IfIdentifier OBJECT-TYPE
+     SYNTAX      Ipv6AddressIfIdentifier
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+        "The Interface Identifier for this interface that
+
+        is (at least) unique on the link this interface is
+        attached to. The Interface Identifier is combined
+        with an address prefix to form an interface address.
+
+        By default, the Interface Identifier is autoconfigured
+        according to the rules of the link type this
+        interface is attached to."
+     ::= { ipv6IfEntry 6 }
+
+ ipv6IfIdentifierLength OBJECT-TYPE
+     SYNTAX      INTEGER (0..64)
+     UNITS       "bits"
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The length of the Interface Identifier in bits."
+     ::= { ipv6IfEntry 7 }
+
+ ipv6IfPhysicalAddress OBJECT-TYPE
+     SYNTAX      PhysAddress
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The interface's physical address. For example, for
+       an IPv6 interface attached to an 802.x link, this
+       object normally contains a MAC address. Note that
+       in some cases this address may differ from the
+       address of the interface's protocol sub-layer.  The
+       interface's media-specific MIB must define the bit
+       and byte ordering and the format of the value of
+       this object. For interfaces which do not have such
+       an address (e.g., a serial line), this object should
+       contain an octet string of zero length."
+     ::= { ipv6IfEntry 8 }
+
+ipv6IfAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+             up(1),       -- ready to pass packets
+             down(2)
+            }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "The desired state of the interface.  When a managed
+      system initializes,  all IPv6 interfaces start with
+      ipv6IfAdminStatus in the down(2) state.  As a result
+      of either explicit management action or per
+      configuration information retained by the managed
+
+      system,  ipv6IfAdminStatus is then changed to
+      the up(1) state (or remains in the down(2) state)."
+    ::= { ipv6IfEntry 9 }
+
+ipv6IfOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+             up(1),             -- ready to pass packets
+
+             down(2),
+             noIfIdentifier(3), -- no interface identifier
+
+                                -- status can not be
+                                -- determined for some
+             unknown(4),        -- reason
+
+                                -- some component is
+             notPresent(5)      -- missing
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The current operational state of the interface.
+      The noIfIdentifier(3) state indicates that no valid
+      Interface Identifier is assigned to the interface.
+      This state usually indicates that the link-local
+      interface address failed Duplicate Address Detection.
+      If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
+      should be down(2).  If ipv6IfAdminStatus is changed
+      to up(1) then ipv6IfOperStatus should change to up(1)
+      if the interface is ready to transmit and receive
+      network traffic; it should remain in the down(2) or
+      noIfIdentifier(3) state if and only if there is a
+      fault that prevents it from going to the up(1) state;
+      it should remain in the notPresent(5) state if
+      the interface has missing (typically, lower layer)
+      components."
+    ::= { ipv6IfEntry 10 }
+
+ipv6IfLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time the interface
+        entered its current operational state.  If the
+        current state was entered prior to the last
+        re-initialization of the local network management
+
+        subsystem, then this object contains a zero
+        value."
+    ::= { ipv6IfEntry 11 }
+
+ --  IPv6 Interface Statistics table
+
+ ipv6IfStatsTable OBJECT-TYPE
+     SYNTAX     SEQUENCE OF Ipv6IfStatsEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+         "IPv6 interface traffic statistics."
+     ::= { ipv6MIBObjects 6 }
+
+ ipv6IfStatsEntry OBJECT-TYPE
+     SYNTAX     Ipv6IfStatsEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+         "An interface statistics entry containing objects
+         at a particular IPv6 interface."
+     AUGMENTS { ipv6IfEntry }
+     ::= { ipv6IfStatsTable 1 }
+
+ Ipv6IfStatsEntry ::= SEQUENCE {
+         ipv6IfStatsInReceives
+             Counter32,
+         ipv6IfStatsInHdrErrors
+             Counter32,
+         ipv6IfStatsInTooBigErrors
+             Counter32,
+         ipv6IfStatsInNoRoutes
+             Counter32,
+         ipv6IfStatsInAddrErrors
+             Counter32,
+         ipv6IfStatsInUnknownProtos
+             Counter32,
+         ipv6IfStatsInTruncatedPkts
+             Counter32,
+         ipv6IfStatsInDiscards
+             Counter32,
+         ipv6IfStatsInDelivers
+             Counter32,
+         ipv6IfStatsOutForwDatagrams
+             Counter32,
+         ipv6IfStatsOutRequests
+             Counter32,
+         ipv6IfStatsOutDiscards
+
+             Counter32,
+         ipv6IfStatsOutFragOKs
+             Counter32,
+         ipv6IfStatsOutFragFails
+             Counter32,
+         ipv6IfStatsOutFragCreates
+             Counter32,
+         ipv6IfStatsReasmReqds
+             Counter32,
+         ipv6IfStatsReasmOKs
+             Counter32,
+         ipv6IfStatsReasmFails
+             Counter32,
+         ipv6IfStatsInMcastPkts
+             Counter32,
+         ipv6IfStatsOutMcastPkts
+             Counter32
+     }
+
+ ipv6IfStatsInReceives OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The total number of input datagrams received by
+        the interface, including those received in error."
+     ::= { ipv6IfStatsEntry 1 }
+
+ ipv6IfStatsInHdrErrors OBJECT-TYPE
+     SYNTAX     Counter32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "The number of input datagrams discarded due to
+        errors in their IPv6 headers, including version
+        number mismatch, other format errors, hop count
+        exceeded, errors discovered in processing their
+        IPv6 options, etc."
+     ::= { ipv6IfStatsEntry 2 }
+
+ ipv6IfStatsInTooBigErrors OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of input datagrams that could not be
+       forwarded because their size exceeded the link MTU
+       of outgoing interface."
+     ::= { ipv6IfStatsEntry 3 }
+
+ ipv6IfStatsInNoRoutes OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of input datagrams discarded because no
+         route could be found to transmit them to their
+         destination."
+     ::= { ipv6IfStatsEntry 4 }
+
+ ipv6IfStatsInAddrErrors OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of input datagrams discarded because
+        the IPv6 address in their IPv6 header's destination
+        field was not a valid address to be received at
+        this entity.  This count includes invalid
+        addresses (e.g., ::0) and unsupported addresses
+        (e.g., addresses with unallocated prefixes).  For
+        entities which are not IPv6 routers and therefore
+        do not forward datagrams, this counter includes
+        datagrams discarded because the destination address
+        was not a local address."
+     ::= { ipv6IfStatsEntry 5 }
+
+ ipv6IfStatsInUnknownProtos OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of locally-addressed datagrams
+        received successfully but discarded because of an
+        unknown or unsupported protocol. This counter is
+        incremented at the interface to which these
+        datagrams were addressed which might not be
+        necessarily the input interface for some of
+        the datagrams."
+     ::= { ipv6IfStatsEntry 6 }
+
+ ipv6IfStatsInTruncatedPkts OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of input datagrams discarded because
+         datagram frame didn't carry enough data."
+     ::= { ipv6IfStatsEntry 7 }
+
+ ipv6IfStatsInDiscards OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of input IPv6 datagrams for which no
+        problems were encountered to prevent their
+        continued processing, but which were discarded
+        (e.g., for lack of buffer space).  Note that this
+        counter does not include any datagrams discarded
+        while awaiting re-assembly."
+     ::= { ipv6IfStatsEntry 8 }
+
+ ipv6IfStatsInDelivers OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+      "The total number of datagrams successfully
+      delivered to IPv6 user-protocols (including ICMP).
+      This counter is incremented at the interface to
+      which these datagrams were addressed which might
+      not be necessarily the input interface for some of
+      the datagrams."
+     ::= { ipv6IfStatsEntry 9 }
+
+ ipv6IfStatsOutForwDatagrams OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of output datagrams which this
+        entity received and forwarded to their final
+        destinations.  In entities which do not act
+        as IPv6 routers, this counter will include
+        only those packets which were Source-Routed
+        via this entity, and the Source-Route
+        processing was successful.  Note that for
+        a successfully forwarded datagram the counter
+        of the outgoing interface is incremented."
+     ::= { ipv6IfStatsEntry 10 }
+
+ ipv6IfStatsOutRequests OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+      "The total number of IPv6 datagrams which local IPv6
+      user-protocols (including ICMP) supplied to IPv6 in
+      requests for transmission.  Note that this counter
+      does not include any datagrams counted in
+      ipv6IfStatsOutForwDatagrams."
+     ::= { ipv6IfStatsEntry 11 }
+
+ ipv6IfStatsOutDiscards OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "The number of output IPv6 datagrams for which no
+         problem was encountered to prevent their
+         transmission to their destination, but which were
+         discarded (e.g., for lack of buffer space).  Note
+         that this counter would include datagrams counted
+         in ipv6IfStatsOutForwDatagrams if any such packets
+         met this (discretionary) discard criterion."
+     ::= { ipv6IfStatsEntry 12 }
+
+ ipv6IfStatsOutFragOKs OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of IPv6 datagrams that have been
+         successfully fragmented at this output interface."
+     ::= { ipv6IfStatsEntry 13 }
+
+ ipv6IfStatsOutFragFails OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of IPv6 datagrams that have been
+         discarded because they needed to be fragmented
+         at this output interface but could not be."
+     ::= { ipv6IfStatsEntry 14 }
+
+ ipv6IfStatsOutFragCreates OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of output datagram fragments that have
+         been generated as a result of fragmentation at
+         this output interface."
+     ::= { ipv6IfStatsEntry 15 }
+
+ ipv6IfStatsReasmReqds OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of IPv6 fragments received which needed
+         to be reassembled at this interface.  Note that this
+         counter is incremented at the interface to which
+         these fragments were addressed which might not
+         be necessarily the input interface for some of
+         the fragments."
+     ::= { ipv6IfStatsEntry 16 }
+
+ ipv6IfStatsReasmOKs OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of IPv6 datagrams successfully
+       reassembled.  Note that this counter is incremented
+       at the interface to which these datagrams were
+       addressed which might not be necessarily the input
+       interface for some of the fragments."
+     ::= { ipv6IfStatsEntry 17 }
+
+ ipv6IfStatsReasmFails OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of failures detected by the IPv6 re-
+        assembly algorithm (for whatever reason: timed
+        out, errors, etc.).  Note that this is not
+        necessarily a count of discarded IPv6 fragments
+        since some algorithms (notably the algorithm in
+        RFC 815) can lose track of the number of fragments
+        by combining them as they are received.
+        This counter is incremented at the interface to which
+        these fragments were addressed which might not be
+        necessarily the input interface for some of the
+        fragments."
+     ::= { ipv6IfStatsEntry 18 }
+
+ ipv6IfStatsInMcastPkts OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS     current
+     DESCRIPTION
+        "The number of multicast packets received
+         by the interface"
+     ::= { ipv6IfStatsEntry 19 }
+
+ ipv6IfStatsOutMcastPkts OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "The number of multicast packets transmitted
+         by the interface"
+     ::= { ipv6IfStatsEntry 20 }
+
+ -- Address Prefix table
+
+ -- The IPv6 Address Prefix table contains information on
+ -- the entity's IPv6 Address Prefixes that are associated
+ -- with IPv6 interfaces.
+
+ ipv6AddrPrefixTable OBJECT-TYPE
+     SYNTAX  SEQUENCE OF Ipv6AddrPrefixEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "The list of IPv6 address prefixes of
+         IPv6 interfaces."
+     ::= { ipv6MIBObjects 7 }
+
+ ipv6AddrPrefixEntry OBJECT-TYPE
+     SYNTAX  Ipv6AddrPrefixEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An interface entry containing objects of
+         a particular IPv6 address prefix."
+     INDEX   { ipv6IfIndex,
+               ipv6AddrPrefix,
+               ipv6AddrPrefixLength }
+     ::= { ipv6AddrPrefixTable 1 }
+
+ Ipv6AddrPrefixEntry ::= SEQUENCE {
+
+      ipv6AddrPrefix                     Ipv6AddressPrefix,
+      ipv6AddrPrefixLength               INTEGER (0..128),
+      ipv6AddrPrefixOnLinkFlag           TruthValue,
+      ipv6AddrPrefixAutonomousFlag       TruthValue,
+      ipv6AddrPrefixAdvPreferredLifetime Unsigned32,
+      ipv6AddrPrefixAdvValidLifetime     Unsigned32
+     }
+
+ ipv6AddrPrefix OBJECT-TYPE
+     SYNTAX      Ipv6AddressPrefix
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "The prefix associated with the this interface."
+     ::= { ipv6AddrPrefixEntry 1 }
+
+ ipv6AddrPrefixLength OBJECT-TYPE
+     SYNTAX      INTEGER (0..128)
+     UNITS       "bits"
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "The length of the prefix (in bits)."
+     ::= { ipv6AddrPrefixEntry 2 }
+
+ ipv6AddrPrefixOnLinkFlag OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "This object has the value 'true(1)', if this
+       prefix can be used  for on-link determination
+       and the value 'false(2)' otherwise."
+     ::= { ipv6AddrPrefixEntry 3 }
+
+ ipv6AddrPrefixAutonomousFlag OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Autonomous address configuration flag. When
+       true(1), indicates that this prefix can be used
+       for autonomous address configuration (i.e. can
+       be used to form a local interface address).
+       If false(2), it is not used to autoconfigure
+       a local interface address."
+     ::= { ipv6AddrPrefixEntry 4 }
+
+ ipv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "seconds"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "It is the length of time in seconds that this
+        prefix will remain preferred, i.e. time until
+        deprecation.  A value of 4,294,967,295 represents
+        infinity.
+
+        The address generated from a deprecated prefix
+        should no longer be used as a source address in
+        new communications, but packets received on such
+        an interface are processed as expected."
+     ::= { ipv6AddrPrefixEntry 5 }
+
+ ipv6AddrPrefixAdvValidLifetime OBJECT-TYPE
+     SYNTAX      Unsigned32
+     UNITS       "seconds"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "It is the length of time in seconds that this
+       prefix will remain valid, i.e. time until
+       invalidation.  A value of 4,294,967,295 represents
+       infinity.
+
+       The address generated from an invalidated prefix
+       should not appear as the destination or source
+       address of a packet."
+     ::= { ipv6AddrPrefixEntry 6 }
+
+ -- the IPv6 Address table
+
+ -- The IPv6 address table contains this node's IPv6
+ -- addressing information.
+
+ ipv6AddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Ipv6AddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "The table of addressing information relevant to
+      this node's interface addresses."
+    ::= { ipv6MIBObjects 8 }
+
+ ipv6AddrEntry OBJECT-TYPE
+    SYNTAX      Ipv6AddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The addressing information for one of this
+        node's interface addresses."
+    INDEX   { ipv6IfIndex, ipv6AddrAddress }
+    ::= { ipv6AddrTable 1 }
+
+ Ipv6AddrEntry ::=
+    SEQUENCE {
+         ipv6AddrAddress        Ipv6Address,
+         ipv6AddrPfxLength      INTEGER,
+         ipv6AddrType           INTEGER,
+         ipv6AddrAnycastFlag    TruthValue,
+         ipv6AddrStatus         INTEGER
+        }
+
+ ipv6AddrAddress OBJECT-TYPE
+    SYNTAX      Ipv6Address
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+      "The IPv6 address to which this entry's addressing
+      information pertains."
+    ::= { ipv6AddrEntry 1 }
+
+ ipv6AddrPfxLength OBJECT-TYPE
+    SYNTAX      INTEGER(0..128)
+    UNITS       "bits"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "The length of the prefix (in bits) associated with
+      the IPv6 address of this entry."
+    ::= { ipv6AddrEntry 2 }
+
+ ipv6AddrType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                        -- address has been formed
+                        -- using stateless
+         stateless(1),  -- autoconfiguration
+
+                        -- address has been acquired
+                        -- by stateful means
+                        -- (e.g. DHCPv6, manual
+         stateful(2),   -- configuration)
+
+                        -- type can not be determined
+         unknown(3)     -- for some reason.
+       }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The type of address. Note that 'stateless(1)'
+       refers to an address that was statelessly
+       autoconfigured; 'stateful(2)' refers to a address
+       which was acquired by via a stateful protocol
+       (e.g. DHCPv6, manual configuration)."
+    ::= { ipv6AddrEntry 3 }
+
+ ipv6AddrAnycastFlag OBJECT-TYPE
+     SYNTAX      TruthValue
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "This object has the value 'true(1)', if this
+       address is an anycast address and the value
+       'false(2)' otherwise."
+     ::= { ipv6AddrEntry 4 }
+
+ ipv6AddrStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+             preferred(1),
+             deprecated(2),
+             invalid(3),
+             inaccessible(4),
+             unknown(5)   -- status can not be determined
+                          -- for some reason.
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+      "Address status.  The preferred(1) state indicates
+      that this is a valid address that can appear as
+      the destination or source address of a packet.
+      The deprecated(2) state indicates that this is
+      a valid but deprecated address that should no longer
+      be used as a source address in new communications,
+      but packets addressed to such an address are
+      processed as expected. The invalid(3) state indicates
+      that this is not valid address which should not
+
+      appear as the destination or source address of
+      a packet. The inaccessible(4) state indicates that
+      the address is not accessible because the interface
+      to which this address is assigned is not operational."
+    ::= { ipv6AddrEntry 5 }
+
+ -- IPv6 Routing objects
+
+ ipv6RouteNumber OBJECT-TYPE
+     SYNTAX      Gauge32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of current ipv6RouteTable entries.
+       This is primarily to avoid having to read
+       the table in order to determine this number."
+     ::= { ipv6MIBObjects 9 }
+
+ ipv6DiscardedRoutes OBJECT-TYPE
+     SYNTAX      Counter32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The number of routing entries which were chosen
+        to be discarded even though they are valid.  One
+        possible reason for discarding such an entry could
+        be to free-up buffer space for other routing
+        entries."
+     ::= { ipv6MIBObjects 10 }
+
+ -- IPv6 Routing table
+
+ ipv6RouteTable OBJECT-TYPE
+     SYNTAX     SEQUENCE OF Ipv6RouteEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "IPv6 Routing table. This table contains
+       an entry for each valid IPv6 unicast route
+       that can be used for packet forwarding
+       determination."
+     ::= { ipv6MIBObjects 11 }
+
+ ipv6RouteEntry OBJECT-TYPE
+     SYNTAX     Ipv6RouteEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+             "A routing entry."
+     INDEX   { ipv6RouteDest,
+               ipv6RoutePfxLength,
+               ipv6RouteIndex }
+     ::= { ipv6RouteTable 1 }
+
+ Ipv6RouteEntry ::= SEQUENCE {
+         ipv6RouteDest           Ipv6Address,
+         ipv6RoutePfxLength      INTEGER,
+         ipv6RouteIndex          Unsigned32,
+         ipv6RouteIfIndex        Ipv6IfIndexOrZero,
+         ipv6RouteNextHop        Ipv6Address,
+         ipv6RouteType           INTEGER,
+         ipv6RouteProtocol       INTEGER,
+         ipv6RoutePolicy         Integer32,
+         ipv6RouteAge            Unsigned32,
+         ipv6RouteNextHopRDI     Unsigned32,
+         ipv6RouteMetric         Unsigned32,
+         ipv6RouteWeight         Unsigned32,
+         ipv6RouteInfo           RowPointer,
+         ipv6RouteValid          TruthValue
+     }
+
+ ipv6RouteDest OBJECT-TYPE
+     SYNTAX     Ipv6Address
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "The destination IPv6 address of this route.
+       This object may not take a Multicast address
+       value."
+     ::= { ipv6RouteEntry 1 }
+
+ ipv6RoutePfxLength OBJECT-TYPE
+     SYNTAX     INTEGER(0..128)
+     UNITS      "bits"
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "Indicates the prefix length of the destination
+       address."
+     ::= { ipv6RouteEntry 2 }
+
+ ipv6RouteIndex OBJECT-TYPE
+     SYNTAX     Unsigned32
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "The value which uniquely identifies the route
+       among the routes to the same network layer
+       destination.  The way this value is chosen is
+       implementation specific but it must be unique for
+       ipv6RouteDest/ipv6RoutePfxLength pair and remain
+       constant for the life of the route."
+     ::= { ipv6RouteEntry 3 }
+
+ ipv6RouteIfIndex OBJECT-TYPE
+     SYNTAX     Ipv6IfIndexOrZero
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+       "The index value which uniquely identifies the local
+       interface through which the next hop of this
+       route should be reached.  The interface identified
+       by a particular value of this index is the same
+       interface as identified by the same value of
+       ipv6IfIndex.  For routes of the discard type this
+       value can be zero."
+     ::= { ipv6RouteEntry 4 }
+
+ ipv6RouteNextHop OBJECT-TYPE
+     SYNTAX     Ipv6Address
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+       "On remote routes, the address of the next
+       system en route;  otherwise, ::0
+       ('00000000000000000000000000000000'H in ASN.1
+       string representation)."
+     ::= { ipv6RouteEntry 5 }
+
+ ipv6RouteType OBJECT-TYPE
+     SYNTAX     INTEGER {
+        other(1),     -- none of the following
+
+                      -- an route indicating that
+                      -- packets to destinations
+                      -- matching this route are
+        discard(2),   -- to be discarded
+
+                      -- route to directly
+        local(3),     -- connected (sub-)network
+
+                      -- route to a remote
+
+        remote(4)     -- destination
+
+     }
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "The type of route. Note that 'local(3)' refers
+        to a route for which the next hop is the final
+        destination; 'remote(4)' refers to a route for
+        which  the  next  hop is not the final
+        destination; 'discard(2)' refers to a route
+        indicating that packets to destinations matching
+        this route are to be discarded (sometimes called
+        black-hole route)."
+     ::= { ipv6RouteEntry 6 }
+
+ ipv6RouteProtocol OBJECT-TYPE
+     SYNTAX     INTEGER {
+       other(1),   -- none of the following
+
+                   -- non-protocol information,
+                   -- e.g., manually configured
+       local(2),   -- entries
+
+       netmgmt(3), -- static route
+
+                   -- obtained via Neighbor
+                   -- Discovery protocol,
+       ndisc(4),   -- e.g., result of Redirect
+
+                   -- the following are all
+                   -- dynamic routing protocols
+       rip(5),     -- RIPng
+       ospf(6),    -- Open Shortest Path First
+       bgp(7),     -- Border Gateway Protocol
+       idrp(8),    -- InterDomain Routing Protocol
+       igrp(9)     -- InterGateway Routing Protocol
+     }
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+       "The routing mechanism via which this route was
+       learned."
+     ::= { ipv6RouteEntry 7 }
+
+ ipv6RoutePolicy OBJECT-TYPE
+     SYNTAX     Integer32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+      "The general set of conditions that would cause the
+      selection of one multipath route (set of next hops
+      for a given destination) is referred to as 'policy'.
+      Unless the mechanism indicated by ipv6RouteProtocol
+      specified otherwise, the policy specifier is the
+      8-bit Traffic Class field of the IPv6 packet header
+      that is zero extended at the left to a 32-bit value.
+
+      Protocols defining 'policy' otherwise must either
+      define a set of values which are valid for
+      this object or must implement an integer-
+      instanced  policy table for which this object's
+      value acts as an index."
+     ::= { ipv6RouteEntry 8 }
+
+ ipv6RouteAge OBJECT-TYPE
+     SYNTAX     Unsigned32
+     UNITS      "seconds"
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "The number of seconds since this route was last
+        updated or otherwise determined to be correct.
+        Note that no semantics of `too old' can be implied
+        except through knowledge of the routing protocol
+        by which the route was learned."
+     ::= { ipv6RouteEntry 9 }
+
+ ipv6RouteNextHopRDI OBJECT-TYPE
+     SYNTAX     Unsigned32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "The Routing Domain ID of the Next Hop.
+        The  semantics of this object are determined by
+        the routing-protocol specified in  the  route's
+        ipv6RouteProtocol value.   When  this object is
+        unknown or not relevant its value should be set
+        to zero."
+     ::= { ipv6RouteEntry 10 }
+
+ ipv6RouteMetric OBJECT-TYPE
+     SYNTAX     Unsigned32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "The routing metric for this route. The
+        semantics of this metric are determined by the
+        routing protocol specified in the route's
+        ipv6RouteProtocol value.  When this is unknown
+        or not relevant to the protocol indicated by
+        ipv6RouteProtocol, the object value should be
+        set to its maximum value (4,294,967,295)."
+     ::= { ipv6RouteEntry 11 }
+
+ ipv6RouteWeight OBJECT-TYPE
+     SYNTAX     Unsigned32
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "The system internal weight value for this route.
+        The semantics of this value are determined by
+        the implementation specific rules. Generally,
+        within routes with the same ipv6RoutePolicy value,
+        the lower the weight value the more preferred is
+        the route."
+     ::= { ipv6RouteEntry 12 }
+
+ ipv6RouteInfo OBJECT-TYPE
+     SYNTAX     RowPointer
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+        "A reference to MIB definitions specific to the
+        particular routing protocol which is responsible
+        for this route, as determined by the  value
+        specified  in the route's ipv6RouteProto value.
+        If this information is not present,  its  value
+        should be set to the OBJECT ID { 0 0 },
+        which is a syntactically valid object  identifier,
+        and any implementation conforming to ASN.1
+        and the Basic Encoding Rules must  be  able  to
+        generate and recognize this value."
+     ::= { ipv6RouteEntry 13 }
+
+ ipv6RouteValid OBJECT-TYPE
+     SYNTAX     TruthValue
+     MAX-ACCESS read-write
+     STATUS     current
+     DESCRIPTION
+        "Setting this object to the value 'false(2)' has
+        the effect of invalidating the corresponding entry
+        in the ipv6RouteTable object.  That is, it
+        effectively disassociates the destination
+
+        identified with said entry from the route
+        identified with said entry.  It is an
+        implementation-specific matter as to whether the
+        agent removes an invalidated entry from the table.
+        Accordingly, management stations must be prepared
+        to receive tabular information from agents that
+        corresponds to entries not currently in use.
+        Proper interpretation of such entries requires
+        examination of the relevant ipv6RouteValid
+        object."
+     DEFVAL  { true }
+     ::= { ipv6RouteEntry 14 }
+
+ -- IPv6 Address Translation table
+
+ ipv6NetToMediaTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF Ipv6NetToMediaEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "The IPv6 Address Translation table used for
+       mapping from IPv6 addresses to physical addresses.
+
+       The IPv6 address translation table contain the
+       Ipv6Address to `physical' address equivalencies.
+       Some interfaces do not use translation tables
+       for determining address equivalencies; if all
+       interfaces are of this type, then the Address
+       Translation table is empty, i.e., has zero
+       entries."
+     ::= { ipv6MIBObjects 12 }
+
+ ipv6NetToMediaEntry OBJECT-TYPE
+     SYNTAX     Ipv6NetToMediaEntry
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+       "Each entry contains one IPv6 address to `physical'
+       address equivalence."
+     INDEX   { ipv6IfIndex,
+               ipv6NetToMediaNetAddress }
+     ::= { ipv6NetToMediaTable 1 }
+
+ Ipv6NetToMediaEntry ::= SEQUENCE {
+         ipv6NetToMediaNetAddress
+             Ipv6Address,
+         ipv6NetToMediaPhysAddress
+
+             PhysAddress,
+         ipv6NetToMediaType
+             INTEGER,
+         ipv6IfNetToMediaState
+             INTEGER,
+         ipv6IfNetToMediaLastUpdated
+             TimeStamp,
+         ipv6NetToMediaValid
+             TruthValue
+     }
+
+ ipv6NetToMediaNetAddress OBJECT-TYPE
+     SYNTAX     Ipv6Address
+     MAX-ACCESS not-accessible
+     STATUS     current
+     DESCRIPTION
+        "The IPv6 Address corresponding to
+        the media-dependent `physical' address."
+     ::= { ipv6NetToMediaEntry 1 }
+
+ ipv6NetToMediaPhysAddress OBJECT-TYPE
+     SYNTAX     PhysAddress
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+       "The media-dependent `physical' address."
+     ::= { ipv6NetToMediaEntry 2 }
+
+ ipv6NetToMediaType OBJECT-TYPE
+     SYNTAX     INTEGER {
+                 other(1),    -- none of the following
+                 dynamic(2),  -- dynamically resolved
+                 static(3),   -- statically configured
+                 local(4)     -- local interface
+                }
+     MAX-ACCESS read-only
+     STATUS     current
+     DESCRIPTION
+             "The type of the mapping. The 'dynamic(2)' type
+             indicates that the IPv6 address to physical
+             addresses mapping has been dynamically
+             resolved using the IPv6 Neighbor Discovery
+             protocol. The static(3)' types indicates that
+             the mapping has been statically configured.
+             The local(4) indicates that the mapping is
+             provided for an entity's own interface address."
+     ::= { ipv6NetToMediaEntry 3 }
+
+ipv6IfNetToMediaState OBJECT-TYPE
+    SYNTAX      INTEGER {
+             reachable(1), -- confirmed reachability
+
+             stale(2),     -- unconfirmed reachability
+
+             delay(3),     -- waiting for reachability
+                           -- confirmation before entering
+                           -- the probe state
+
+             probe(4),     -- actively probing
+
+             invalid(5),   -- an invalidated mapping
+
+             unknown(6)    -- state can not be determined
+                           -- for some reason.
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Neighbor Unreachability Detection [8] state
+        for the interface when the address mapping in
+        this entry is used."
+    ::= { ipv6NetToMediaEntry 4 }
+
+ipv6IfNetToMediaLastUpdated OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time this entry
+        was last updated.  If this entry was updated prior
+        to the last re-initialization of the local network
+        management subsystem, then this object contains
+        a zero value."
+    ::= { ipv6NetToMediaEntry 5 }
+
+ ipv6NetToMediaValid OBJECT-TYPE
+     SYNTAX     TruthValue
+     MAX-ACCESS read-write
+     STATUS     current
+     DESCRIPTION
+      "Setting this object to the value 'false(2)' has
+      the effect of invalidating the corresponding entry
+      in the ipv6NetToMediaTable.  That is, it effectively
+      disassociates the interface identified with said
+      entry from the mapping identified with said entry.
+      It is an implementation-specific matter as to
+
+      whether the agent removes an invalidated entry
+      from the table.  Accordingly, management stations
+      must be prepared to receive tabular information
+      from agents that corresponds to entries not
+      currently in use.  Proper interpretation of such
+      entries requires examination of the relevant
+      ipv6NetToMediaValid object."
+     DEFVAL  { true }
+     ::= { ipv6NetToMediaEntry 6 }
+
+-- definition of IPv6-related notifications.
+-- Note that we need ipv6NotificationPrefix with the 0
+-- sub-identifier to make this MIB to translate to
+-- an SNMPv1 format in a reversible way. For example
+-- it is needed for proxies that convert SNMPv1 traps
+-- to SNMPv2 notifications without MIB knowledge.
+
+ipv6Notifications      OBJECT IDENTIFIER
+     ::= { ipv6MIB 2 }
+ipv6NotificationPrefix OBJECT IDENTIFIER
+     ::= { ipv6Notifications 0 }
+
+ipv6IfStateChange NOTIFICATION-TYPE
+     OBJECTS {
+              ipv6IfDescr,
+              ipv6IfOperStatus -- the new state of the If.
+             }
+     STATUS             current
+     DESCRIPTION
+        "An ipv6IfStateChange notification signifies
+        that there has been a change in the state of
+        an ipv6 interface.  This notification should
+        be generated when the interface's operational
+        status transitions to or from the up(1) state."
+     ::= { ipv6NotificationPrefix 1 }
+
+-- conformance information
+
+ipv6Conformance OBJECT IDENTIFIER ::= { ipv6MIB 3 }
+
+ipv6Compliances OBJECT IDENTIFIER ::= { ipv6Conformance 1 }
+ipv6Groups      OBJECT IDENTIFIER ::= { ipv6Conformance 2 }
+
+-- compliance statements
+
+ipv6Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+      "The compliance statement for SNMPv2 entities which
+      implement ipv6 MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ipv6GeneralGroup,
+                           ipv6NotificationGroup }
+          OBJECT    ipv6Forwarding
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+          OBJECT    ipv6DefaultHopLimit
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+          OBJECT    ipv6IfDescr
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+          OBJECT    ipv6IfIdentifier
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+          OBJECT    ipv6IfIdentifierLength
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+
+          OBJECT    ipv6IfAdminStatus
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+          OBJECT    ipv6RouteValid
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+                access to this object"
+          OBJECT    ipv6NetToMediaValid
+            MIN-ACCESS  read-only
+            DESCRIPTION
+               "An agent is not required to provide write
+
+                access to this object"
+    ::= { ipv6Compliances 1 }
+
+ipv6GeneralGroup OBJECT-GROUP
+    OBJECTS { ipv6Forwarding,
+              ipv6DefaultHopLimit,
+              ipv6Interfaces,
+              ipv6IfTableLastChange,
+              ipv6IfDescr,
+              ipv6IfLowerLayer,
+              ipv6IfEffectiveMtu,
+              ipv6IfReasmMaxSize,
+              ipv6IfIdentifier,
+              ipv6IfIdentifierLength,
+              ipv6IfPhysicalAddress,
+              ipv6IfAdminStatus,
+              ipv6IfOperStatus,
+              ipv6IfLastChange,
+              ipv6IfStatsInReceives,
+              ipv6IfStatsInHdrErrors,
+              ipv6IfStatsInTooBigErrors,
+              ipv6IfStatsInNoRoutes,
+              ipv6IfStatsInAddrErrors,
+              ipv6IfStatsInUnknownProtos,
+              ipv6IfStatsInTruncatedPkts,
+              ipv6IfStatsInDiscards,
+              ipv6IfStatsInDelivers,
+              ipv6IfStatsOutForwDatagrams,
+              ipv6IfStatsOutRequests,
+              ipv6IfStatsOutDiscards,
+              ipv6IfStatsOutFragOKs,
+              ipv6IfStatsOutFragFails,
+              ipv6IfStatsOutFragCreates,
+              ipv6IfStatsReasmReqds,
+              ipv6IfStatsReasmOKs,
+              ipv6IfStatsReasmFails,
+              ipv6IfStatsInMcastPkts,
+              ipv6IfStatsOutMcastPkts,
+              ipv6AddrPrefixOnLinkFlag,
+              ipv6AddrPrefixAutonomousFlag,
+              ipv6AddrPrefixAdvPreferredLifetime,
+              ipv6AddrPrefixAdvValidLifetime,
+              ipv6AddrPfxLength,
+              ipv6AddrType,
+              ipv6AddrAnycastFlag,
+              ipv6AddrStatus,
+              ipv6RouteNumber,
+              ipv6DiscardedRoutes,
+              ipv6RouteIfIndex,
+              ipv6RouteNextHop,
+              ipv6RouteType,
+              ipv6RouteProtocol,
+              ipv6RoutePolicy,
+              ipv6RouteAge,
+              ipv6RouteNextHopRDI,
+              ipv6RouteMetric,
+              ipv6RouteWeight,
+              ipv6RouteInfo,
+              ipv6RouteValid,
+              ipv6NetToMediaPhysAddress,
+              ipv6NetToMediaType,
+              ipv6IfNetToMediaState,
+              ipv6IfNetToMediaLastUpdated,
+              ipv6NetToMediaValid }
+    STATUS    current
+    DESCRIPTION
+         "The IPv6 group of objects providing for basic
+          management of IPv6 entities."
+    ::= { ipv6Groups 1 }
+
+ipv6NotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { ipv6IfStateChange }
+    STATUS    current
+    DESCRIPTION
+         "The notification that an IPv6 entity is required
+          to implement."
+    ::= { ipv6Groups 2 }
+
+ END
diff --git a/snmp_builder/mibs/IPV6-MLD-MIB.mib b/snmp_builder/mibs/IPV6-MLD-MIB.mib
new file mode 100644
index 0000000..b014e8e
--- /dev/null
+++ b/snmp_builder/mibs/IPV6-MLD-MIB.mib
@@ -0,0 +1,417 @@
+IPV6-MLD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
+    Unsigned32, TimeTicks, mib-2     FROM SNMPv2-SMI
+    RowStatus, TruthValue            FROM SNMPv2-TC
+    InetAddressIPv6             FROM INET-ADDRESS-MIB
+    InterfaceIndex, InterfaceIndexOrZero
+                                         FROM IF-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;
+
+mldMIB MODULE-IDENTITY
+    LAST-UPDATED "200101250000Z" -- 25 Jan 2001
+    ORGANIZATION "IETF IPNGWG Working Group."
+    CONTACT-INFO
+            " Brian Haberman
+              Nortel Networks
+              4309 Emperor Blvd.
+              Durham, NC  27703
+              USA
+
+              Phone: +1 919 992 4439
+              e-mail: haberman@nortelnetworks.com"
+    DESCRIPTION
+            "The MIB module for MLD Management."
+    REVISION "200101250000Z" -- 25 Jan 2001
+    DESCRIPTION
+            "Initial version, published as RFC 3019."
+    ::= { mib-2 91 }
+
+mldMIBObjects     OBJECT IDENTIFIER ::= { mldMIB 1 }
+--
+--  The MLD Interface Table
+--
+
+mldInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MldInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+             "The (conceptual) table listing the interfaces on which
+             MLD is enabled."
+    ::= { mldMIBObjects 1 }
+
+mldInterfaceEntry OBJECT-TYPE
+    SYNTAX     MldInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) representing an interface on
+            which MLD is enabled."
+    INDEX      { mldInterfaceIfIndex }
+    ::= { mldInterfaceTable 1 }
+
+MldInterfaceEntry ::= SEQUENCE {
+    mldInterfaceIfIndex               InterfaceIndex,
+    mldInterfaceQueryInterval         Unsigned32,
+    mldInterfaceStatus                RowStatus,
+    mldInterfaceVersion               Unsigned32,
+    mldInterfaceQuerier               InetAddressIPv6,
+    mldInterfaceQueryMaxResponseDelay Unsigned32,
+    mldInterfaceJoins                 Counter32,
+    mldInterfaceGroups                Gauge32,
+    mldInterfaceRobustness            Unsigned32,
+    mldInterfaceLastListenQueryIntvl  Unsigned32,
+    mldInterfaceProxyIfIndex          InterfaceIndexOrZero,
+    mldInterfaceQuerierUpTime         TimeTicks,
+    mldInterfaceQuerierExpiryTime     TimeTicks
+}
+
+mldInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The internetwork-layer interface value of the interface
+            for which MLD is enabled."
+    ::= { mldInterfaceEntry 1 }
+
+mldInterfaceQueryInterval OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which MLD Host-Query packets are
+            transmitted on this interface."
+    DEFVAL     { 125 }
+    ::= { mldInterfaceEntry 2 }
+
+mldInterfaceStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+             "The activation of a row enables MLD on the interface.
+             The destruction of a row disables MLD on the interface."
+    ::= { mldInterfaceEntry 3 }
+
+mldInterfaceVersion OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+             "The version of MLD which is running on this interface.
+             This object is a place holder to allow for new versions
+             of MLD to be introduced.  Version 1 of MLD is defined
+             in RFC 2710."
+    DEFVAL     { 1 }
+    ::= { mldInterfaceEntry 4 }
+
+mldInterfaceQuerier OBJECT-TYPE
+    SYNTAX     InetAddressIPv6 (SIZE (16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+             "The address of the MLD Querier on the IPv6 subnet to
+             which this interface is attached."
+    ::= { mldInterfaceEntry 5 }
+
+mldInterfaceQueryMaxResponseDelay OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum query response time advertised in MLD
+            queries on this interface."
+    DEFVAL     { 10 }
+    ::= { mldInterfaceEntry 6 }
+
+mldInterfaceJoins OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a group membership has been added on
+            this interface; that is, the number of times an entry for
+            this interface has been added to the Cache Table.  This
+            object gives an indication of the amount of MLD activity
+            over time."
+    ::= { mldInterfaceEntry 7 }
+
+mldInterfaceGroups OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The current number of entries for this interface in the
+            Cache Table."
+    ::= { mldInterfaceEntry 8 }
+
+mldInterfaceRobustness OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The Robustness Variable allows tuning for the expected
+            packet loss on a subnet.  If a subnet is expected to be
+            lossy, the Robustness Variable may be increased.  MLD is
+            robust to (Robustness Variable-1) packet losses.  The
+            discussion of the Robustness Variable is in Section 7.1
+            of RFC 2710."
+    DEFVAL     { 2 }
+    ::= { mldInterfaceEntry 9 }
+
+mldInterfaceLastListenQueryIntvl OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+             "The Last Member Query Interval is the Max Response
+             Delay inserted into Group-Specific Queries sent in
+             response to Leave Group messages, and is also the amount
+             of time between Group-Specific Query messages.  This
+             value may be tuned to modify the leave latency of the
+             network.  A reduced value results in reduced time to
+             detect the loss of the last member of a group."
+    DEFVAL     { 1 }
+    ::= { mldInterfaceEntry 10 }
+
+mldInterfaceProxyIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+             "Some devices implement a form of MLD proxying whereby
+             memberships learned on the interface represented by this
+             row, cause MLD Multicast Listener Reports to be sent on
+             the internetwork-layer interface identified by this
+             object.  Such a device would implement mldRouterMIBGroup
+             only on its router interfaces (those interfaces with
+             non-zero mldInterfaceProxyIfIndex).  Typically, the
+             value of this object is 0, indicating that no proxying
+             is being done."
+    DEFVAL     { 0 }
+    ::= { mldInterfaceEntry 11 }
+
+mldInterfaceQuerierUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since mldInterfaceQuerier was last changed."
+    ::= { mldInterfaceEntry 12 }
+
+mldInterfaceQuerierExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the Other Querier Present
+            Timer expires.  If the local system is the querier,
+            the value of this object is zero."
+    ::= { mldInterfaceEntry 13 }
+
+--
+--  The MLD Cache Table
+--
+
+mldCacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MldCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+             "The (conceptual) table listing the IPv6 multicast
+
+             groups for which there are members on a particular
+             interface."
+    ::= { mldMIBObjects 2 }
+
+mldCacheEntry OBJECT-TYPE
+    SYNTAX     MldCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the mldCacheTable."
+    INDEX      { mldCacheAddress, mldCacheIfIndex }
+    ::= { mldCacheTable 1 }
+
+MldCacheEntry ::= SEQUENCE {
+    mldCacheAddress         InetAddressIPv6,
+    mldCacheIfIndex            InterfaceIndex,
+    mldCacheSelf               TruthValue,
+    mldCacheLastReporter   InetAddressIPv6,
+    mldCacheUpTime             TimeTicks,
+    mldCacheExpiryTime         TimeTicks,
+    mldCacheStatus             RowStatus
+}
+
+mldCacheAddress OBJECT-TYPE
+    SYNTAX     InetAddressIPv6 (SIZE (16))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IPv6 multicast group address for which this entry
+            contains information."
+    ::= { mldCacheEntry 1 }
+
+mldCacheIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+             "The internetwork-layer interface for which this entry
+             contains information for an IPv6 multicast group
+             address."
+    ::= { mldCacheEntry 2 }
+
+mldCacheSelf OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "An indication of whether the local system is a member of
+
+            this group address on this interface."
+    DEFVAL     { true }
+    ::= { mldCacheEntry 3 }
+
+mldCacheLastReporter OBJECT-TYPE
+    SYNTAX     InetAddressIPv6 (SIZE (16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+             "The IPv6 address of the source of the last membership
+             report received for this IPv6 Multicast group address on
+             this interface.  If no membership report has been
+             received, this object has the value 0::0."
+    ::= { mldCacheEntry 4 }
+
+mldCacheUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time elapsed since this entry was created."
+    ::= { mldCacheEntry 5 }
+
+mldCacheExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+             "The minimum amount of time remaining before this entry
+             will be aged out.  A value of 0 indicates that the entry
+             is only present because mldCacheSelf is true and that if
+             the router left the group, this entry would be aged out
+             immediately.  Note that some implementations may process
+             Membership Reports from the local system in the same way
+             as reports from other hosts, so a value of 0 is not
+             required."
+    ::= { mldCacheEntry 6 }
+
+mldCacheStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or existing entries deleted from this table."
+    ::= { mldCacheEntry 7 }
+
+-- conformance information
+
+mldMIBConformance
+               OBJECT IDENTIFIER ::= { mldMIB 2 }
+mldMIBCompliances
+               OBJECT IDENTIFIER ::= { mldMIBConformance 1 }
+mldMIBGroups
+               OBJECT IDENTIFIER ::= { mldMIBConformance 2 }
+
+-- compliance statements
+
+mldHostMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts running MLD and
+            implementing the MLD MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mldBaseMIBGroup,
+                       mldHostMIBGroup
+                     }
+
+    OBJECT     mldInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { mldMIBCompliances 1 }
+
+mldRouterMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers running MLD and
+            implementing the MLD MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mldBaseMIBGroup,
+                       mldRouterMIBGroup
+                     }
+
+    OBJECT     mldInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { mldMIBCompliances 2 }
+
+-- units of conformance
+
+mldBaseMIBGroup OBJECT-GROUP
+    OBJECTS { mldCacheSelf,
+              mldCacheStatus, mldInterfaceStatus
+            }
+    STATUS  current
+    DESCRIPTION
+            "The basic collection of objects providing management of
+            MLD.  The mldBaseMIBGroup is designed to allow for the
+            manager creation and deletion of MLD cache entries."
+    ::= { mldMIBGroups 1 }
+
+mldRouterMIBGroup OBJECT-GROUP
+    OBJECTS { mldCacheUpTime, mldCacheExpiryTime,
+              mldInterfaceQueryInterval,
+              mldInterfaceJoins, mldInterfaceGroups,
+              mldCacheLastReporter,
+              mldInterfaceQuerierUpTime,
+              mldInterfaceQuerierExpiryTime,
+              mldInterfaceQuerier,
+              mldInterfaceVersion,
+              mldInterfaceQueryMaxResponseDelay,
+              mldInterfaceRobustness,
+              mldInterfaceLastListenQueryIntvl
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of MLD
+            in routers."
+    ::= { mldMIBGroups 2 }
+
+mldHostMIBGroup OBJECT-GROUP
+    OBJECTS { mldInterfaceQuerier
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of MLD
+            in hosts."
+    ::= { mldMIBGroups 3 }
+
+mldProxyMIBGroup OBJECT-GROUP
+    OBJECTS { mldInterfaceProxyIfIndex }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for management of MLD
+            proxy devices."
+    ::= { mldMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/IPV6-TCP-MIB.mib b/snmp_builder/mibs/IPV6-TCP-MIB.mib
new file mode 100644
index 0000000..a2fb857
--- /dev/null
+++ b/snmp_builder/mibs/IPV6-TCP-MIB.mib
@@ -0,0 +1,211 @@
+IPV6-TCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF
+   MODULE-IDENTITY, OBJECT-TYPE,
+   mib-2, experimental                  FROM SNMPv2-SMI
+   Ipv6Address, Ipv6IfIndexOrZero       FROM IPV6-TC;
+
+ipv6TcpMIB MODULE-IDENTITY
+   LAST-UPDATED "9801290000Z"
+   ORGANIZATION "IETF IPv6 MIB Working Group"
+   CONTACT-INFO
+        "       Mike Daniele
+
+                Postal: Compaq Computer Corporation
+                        110 Spitbrook Rd
+                        Nashua, NH 03062.
+                        US
+
+                Phone:  +1 603 884 1423
+                Email:  daniele@zk3.dec.com"
+   DESCRIPTION
+        "The MIB module for entities implementing TCP over IPv6."
+   ::= { experimental 86 }
+
+-- objects specific to TCP for IPv6
+
+tcp      OBJECT IDENTIFIER ::= { mib-2 6 }
+
+-- the TCP over IPv6 Connection table
+
+-- This connection table contains information about this
+-- entity's existing TCP connections between IPv6 endpoints.
+-- Only connections between IPv6 addresses are contained in
+-- this table.  This entity's connections between IPv4
+-- endpoints are contained in tcpConnTable.
+
+ipv6TcpConnTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Ipv6TcpConnEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+        "A table containing TCP connection-specific information,
+         for only those connections whose endpoints are IPv6 addresses."
+   ::= { tcp 16 }
+
+ipv6TcpConnEntry OBJECT-TYPE
+   SYNTAX      Ipv6TcpConnEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+        "A conceptual row of the ipv6TcpConnTable containing
+         information about a particular current TCP connection.
+         Each row of this table is transient, in that it ceases to
+         exist when (or soon after) the connection makes the transition
+         to the CLOSED state.
+
+         Note that conceptual rows in this table require an additional
+         index object compared to tcpConnTable, since IPv6 addresses
+         are not guaranteed to be unique on the managed node."
+   INDEX   { ipv6TcpConnLocalAddress,
+             ipv6TcpConnLocalPort,
+             ipv6TcpConnRemAddress,
+             ipv6TcpConnRemPort,
+             ipv6TcpConnIfIndex }
+   ::= { ipv6TcpConnTable 1 }
+
+Ipv6TcpConnEntry ::=
+   SEQUENCE { ipv6TcpConnLocalAddress    Ipv6Address,
+              ipv6TcpConnLocalPort       INTEGER (0..65535),
+              ipv6TcpConnRemAddress      Ipv6Address,
+              ipv6TcpConnRemPort         INTEGER (0..65535),
+              ipv6TcpConnIfIndex         Ipv6IfIndexOrZero,
+              ipv6TcpConnState           INTEGER }
+
+ipv6TcpConnLocalAddress OBJECT-TYPE
+   SYNTAX     Ipv6Address
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+        "The local IPv6 address for this TCP connection. In
+         the case of a connection in the listen state which
+         is willing to accept connections for any IPv6
+         address associated with the managed node, the value
+         ::0 is used."
+   ::= { ipv6TcpConnEntry 1 }
+
+ipv6TcpConnLocalPort OBJECT-TYPE
+   SYNTAX     INTEGER (0..65535)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+        "The local port number for this TCP connection."
+   ::= { ipv6TcpConnEntry 2 }
+
+ipv6TcpConnRemAddress OBJECT-TYPE
+   SYNTAX     Ipv6Address
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+        "The remote IPv6 address for this TCP connection."
+   ::= { ipv6TcpConnEntry 3 }
+
+ipv6TcpConnRemPort OBJECT-TYPE
+   SYNTAX     INTEGER (0..65535)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+        "The remote port number for this TCP connection."
+   ::= { ipv6TcpConnEntry 4 }
+
+ipv6TcpConnIfIndex OBJECT-TYPE
+   SYNTAX     Ipv6IfIndexOrZero
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+        "An index object used to disambiguate conceptual rows in
+         the table, since the connection 4-tuple may not be unique.
+
+         If the connection's remote address (ipv6TcpConnRemAddress)
+         is a link-local address and the connection's local address
+
+         (ipv6TcpConnLocalAddress) is not a link-local address, this
+         object identifies a local interface on the same link as
+         the connection's remote link-local address.
+
+         Otherwise, this object identifies the local interface that
+         is associated with the ipv6TcpConnLocalAddress for this
+         TCP connection.  If such a local interface cannot be determined,
+         this object should take on the value 0.  (A possible example
+         of this would be if the value of ipv6TcpConnLocalAddress is ::0.)
+
+         The interface identified by a particular non-0 value of this
+         index is the same interface as identified by the same value
+         of ipv6IfIndex.
+
+         The value of this object must remain constant during the life
+         of the TCP connection."
+   ::= { ipv6TcpConnEntry 5 }
+
+ipv6TcpConnState OBJECT-TYPE
+   SYNTAX     INTEGER {
+        closed(1),
+        listen(2),
+        synSent(3),
+        synReceived(4),
+        established(5),
+        finWait1(6),
+        finWait2(7),
+        closeWait(8),
+        lastAck(9),
+        closing(10),
+        timeWait(11),
+        deleteTCB(12) }
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+        "The state of this TCP connection.
+
+         The only value which may be set by a management station is
+         deleteTCB(12).  Accordingly, it is appropriate for an agent
+         to return an error response (`badValue' for SNMPv1, 'wrongValue'
+         for SNMPv2) if a management station attempts to set this
+         object to any other value.
+
+         If a management station sets this object to the value
+         deleteTCB(12), then this has the effect of deleting the TCB
+         (as defined in RFC 793) of the corresponding connection on
+         the managed node, resulting in immediate termination of the
+         connection.
+
+         As an implementation-specific option, a RST segment may be
+         sent from the managed node to the other TCP endpoint (note
+         however that RST segments are not sent reliably)."
+   ::= { ipv6TcpConnEntry 6 }
+
+--
+-- conformance information
+--
+
+ipv6TcpConformance OBJECT IDENTIFIER ::= { ipv6TcpMIB 2 }
+
+ipv6TcpCompliances OBJECT IDENTIFIER ::= { ipv6TcpConformance 1 }
+ipv6TcpGroups      OBJECT IDENTIFIER ::= { ipv6TcpConformance 2 }
+
+-- compliance statements
+
+ipv6TcpCompliance MODULE-COMPLIANCE
+   STATUS  current
+   DESCRIPTION
+        "The compliance statement for SNMPv2 entities which
+         implement TCP over IPv6."
+   MODULE  -- this module
+   MANDATORY-GROUPS { ipv6TcpGroup }
+   ::= { ipv6TcpCompliances 1 }
+
+ipv6TcpGroup OBJECT-GROUP
+   OBJECTS   { -- these are defined in this module
+               -- ipv6TcpConnLocalAddress (not-accessible)
+               -- ipv6TcpConnLocalPort (not-accessible)
+               -- ipv6TcpConnRemAddress (not-accessible)
+               -- ipv6TcpConnRemPort (not-accessible)
+               -- ipv6TcpConnIfIndex (not-accessible)
+               ipv6TcpConnState }
+   STATUS    current
+   DESCRIPTION
+        "The group of objects providing management of
+         TCP over IPv6."
+   ::= { ipv6TcpGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/IPV6-UDP-MIB.mib b/snmp_builder/mibs/IPV6-UDP-MIB.mib
new file mode 100644
index 0000000..6c929eb
--- /dev/null
+++ b/snmp_builder/mibs/IPV6-UDP-MIB.mib
@@ -0,0 +1,141 @@
+IPV6-UDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF
+   MODULE-IDENTITY, OBJECT-TYPE,
+   mib-2, experimental                  FROM SNMPv2-SMI
+   Ipv6Address, Ipv6IfIndexOrZero       FROM IPV6-TC;
+
+ipv6UdpMIB MODULE-IDENTITY
+   LAST-UPDATED "9801290000Z"
+   ORGANIZATION "IETF IPv6 MIB Working Group"
+   CONTACT-INFO
+        "               Mike Daniele
+
+                Postal: Compaq Computer Corporation
+                        110 Spitbrook Rd
+                        Nashua, NH 03062.
+                        US
+
+                Phone:  +1 603 884 1423
+                Email:  daniele@zk3.dec.com"
+   DESCRIPTION
+        "The MIB module for entities implementing UDP over IPv6."
+   ::= { experimental 87 }
+
+-- objects specific to UDP for IPv6
+
+udp      OBJECT IDENTIFIER ::= { mib-2 7 }
+
+-- the UDP over IPv6 Listener table
+
+-- This table contains information about this entity's
+-- UDP/IPv6 endpoints.  Only endpoints utilizing IPv6 addresses
+-- are contained in this table.  This entity's UDP/IPv4 endpoints
+-- are contained in udpTable.
+
+ipv6UdpTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF Ipv6UdpEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+        "A table containing UDP listener information for
+         UDP/IPv6 endpoints."
+   ::= { udp 6 }
+
+ipv6UdpEntry OBJECT-TYPE
+   SYNTAX      Ipv6UdpEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+        "Information about a particular current UDP listener.
+
+         Note that conceptual rows in this table require an
+         additional index object compared to udpTable, since
+         IPv6 addresses are not guaranteed to be unique on the
+         managed node."
+   INDEX   { ipv6UdpLocalAddress,
+             ipv6UdpLocalPort,
+             ipv6UdpIfIndex }
+   ::= { ipv6UdpTable 1 }
+
+Ipv6UdpEntry ::= SEQUENCE {
+   ipv6UdpLocalAddress    Ipv6Address,
+   ipv6UdpLocalPort       INTEGER (0..65535),
+   ipv6UdpIfIndex         Ipv6IfIndexOrZero }
+
+ipv6UdpLocalAddress OBJECT-TYPE
+   SYNTAX       Ipv6Address
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+        "The local IPv6 address for this UDP listener.
+         In the case of a UDP listener which is willing
+         to accept datagrams for any IPv6 address
+         associated with the managed node, the value ::0
+         is used."
+   ::= { ipv6UdpEntry 1 }
+
+ipv6UdpLocalPort OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The local port number for this UDP listener."
+    ::= { ipv6UdpEntry 2 }
+
+ipv6UdpIfIndex OBJECT-TYPE
+   SYNTAX     Ipv6IfIndexOrZero
+   MAX-ACCESS   read-only
+   STATUS     current
+   DESCRIPTION
+        "An index object used to disambiguate conceptual rows in
+         the table, since the ipv6UdpLocalAddress/ipv6UdpLocalPort
+         pair may not be unique.
+
+         This object identifies the local interface that is
+         associated with ipv6UdpLocalAddress for this UDP listener.
+         If such a local interface cannot be determined, this object
+         should take on the value 0.  (A possible example of this
+         would be if the value of ipv6UdpLocalAddress is ::0.)
+
+         The interface identified by a particular non-0 value of
+         this index is the same interface as identified by the same
+         value of ipv6IfIndex.
+
+         The value of this object must remain constant during
+         the life of this UDP endpoint."
+   ::= { ipv6UdpEntry 3 }
+
+--
+-- conformance information
+--
+
+ipv6UdpConformance OBJECT IDENTIFIER ::= { ipv6UdpMIB 2 }
+
+ipv6UdpCompliances OBJECT IDENTIFIER ::= { ipv6UdpConformance 1 }
+ipv6UdpGroups      OBJECT IDENTIFIER ::= { ipv6UdpConformance 2 }
+
+-- compliance statements
+
+ipv6UdpCompliance MODULE-COMPLIANCE
+   STATUS  current
+   DESCRIPTION
+        "The compliance statement for SNMPv2 entities which
+         implement UDP over IPv6."
+   MODULE  -- this module
+   MANDATORY-GROUPS { ipv6UdpGroup }
+   ::= { ipv6UdpCompliances 1 }
+
+ipv6UdpGroup OBJECT-GROUP
+   OBJECTS   { -- these are defined in this module
+               -- ipv6UdpLocalAddress (not-accessible)
+               -- ipv6UdpLocalPort (not-accessible)
+               ipv6UdpIfIndex }
+   STATUS    current
+   DESCRIPTION
+        "The group of objects providing management of
+         UDP over IPv6."
+   ::= { ipv6UdpGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/ISCSI-MIB.mib b/snmp_builder/mibs/ISCSI-MIB.mib
new file mode 100644
index 0000000..7b3ba9e
--- /dev/null
+++ b/snmp_builder/mibs/ISCSI-MIB.mib
@@ -0,0 +1,3097 @@
+ISCSI-MIB DEFINITIONS  ::= BEGIN
+
+    IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE,
+    Unsigned32, Counter32, Counter64, Gauge32,
+    mib-2
+    FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION, TruthValue, RowPointer, TimeStamp, RowStatus,
+    AutonomousType, StorageType
+    FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+    FROM SNMPv2-CONF
+
+    SnmpAdminString
+    FROM SNMP-FRAMEWORK-MIB -- RFC 3411
+
+    InetAddressType, InetAddress, InetPortNumber
+    FROM INET-ADDRESS-MIB -- RFC 4001
+    ;
+
+iscsiMibModule MODULE-IDENTITY
+    LAST-UPDATED  "200605220000Z" -- May 22, 2006
+    ORGANIZATION  "IETF IPS Working Group"
+    CONTACT-INFO
+    "
+    Mark Bakke
+    Cisco Systems, Inc
+    7900 International Drive, Suite 400
+    Bloomington, MN
+    USA 55425
+
+    E-mail: mbakke@cisco.com
+
+    Marjorie Krueger
+    Hewlett-Packard
+    Networked Storage Architecture
+    Networked Storage Solutions Org.
+    8000 Foothills Blvd.
+    Roseville, CA 95747
+
+    E-mail: marjorie_krueger@hp.com
+
+    Tom McSweeney
+    IBM Corporation
+    600 Park Offices Drive
+    Research Triangle Park, NC
+    USA 27709
+
+    E-mail: tommcs@us.ibm.com
+
+    James Muchow
+    Qlogic Corp.
+    6321 Bury Dr.
+    Eden Prairie, MN
+    USA 55346
+
+    E-mail: james.muchow@qlogic.com"
+    DESCRIPTION
+        "The iSCSI Protocol MIB module.
+         Copyright (C) The Internet Society (2006).  This version of
+         this MIB module is part of RFC 4544;  see the RFC itself for
+         full legal notices."
+    REVISION "200605220000Z" -- May 22, 2006
+    DESCRIPTION
+        "Initial version of the iSCSI Protocol MIB module"
+::= { mib-2 142 }
+
+iscsiNotifications OBJECT IDENTIFIER ::= { iscsiMibModule 0 }
+iscsiObjects       OBJECT IDENTIFIER ::= { iscsiMibModule 1 }
+iscsiConformance   OBJECT IDENTIFIER ::= { iscsiMibModule 2 }
+iscsiAdmin         OBJECT IDENTIFIER ::= { iscsiMibModule 3 }
+
+-- Textual Conventions
+
+IscsiTransportProtocol ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS        current
+    DESCRIPTION
+        "This data type is used to define the transport
+        protocols that will carry iSCSI PDUs."
+    REFERENCE
+        "RFC791, RFC1700
+
+        The presently known, officially delegated numbers
+        can be found at:
+        http://www.iana.org/assignments/protocol-numbers"
+    SYNTAX        Unsigned32 (0..255)
+
+IscsiDigestMethod ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+        "This data type represents the methods possible
+        for digest negotiation.
+        none     - a placeholder for a secondary digest method
+                   that means only the primary method can be
+                   used.
+        other    - a digest method other than those defined below.
+        noDigest - does not support digests (will operate without
+                   a digest (Note: implementations must support
+                   digests to be compliant with the RFC3720).
+        CRC32c   - require a CRC32C digest."
+    REFERENCE
+        "RFC 3720, Section 12.1, HeaderDigest and DataDigest"
+    SYNTAX        INTEGER {
+                      none(1),
+                      other(2),
+                      noDigest(3),
+                      crc32c(4)
+                  }
+
+IscsiName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "223t"
+    STATUS        current
+    DESCRIPTION
+        "This data type is used for objects whose value is an
+        iSCSI name with the properties described in RFC 3720
+        section 3.2.6.1, and encoded as specified in RFC 3720
+        section 3.2.6.2.  A zero-length string indicates the
+        absence of an iSCSI name."
+    REFERENCE
+        "RFC 3720, Section 3.2.6, iSCSI Names."
+    SYNTAX        OCTET STRING (SIZE(0 | 16..223))
+
+--**********************************************************************
+
+iscsiDescriptors OBJECT IDENTIFIER ::= { iscsiAdmin 1 }
+
+iscsiHeaderIntegrityTypes OBJECT IDENTIFIER ::= { iscsiDescriptors 1 }
+
+iscsiHdrIntegrityNone OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The authoritative identifier when no integrity
+        scheme (for either the header or data) is being
+
+        used."
+    REFERENCE
+        "RFC 3720, Section 12.1, HeaderDigest and DataDigest"
+::= { iscsiHeaderIntegrityTypes 1 }
+
+iscsiHdrIntegrityCrc32c OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The authoritative identifier when the integrity
+        scheme (for either the header or data) is CRC32c."
+    REFERENCE
+        "RFC 3720, Section 12.1, HeaderDigest and DataDigest"
+::= { iscsiHeaderIntegrityTypes 2 }
+
+iscsiDataIntegrityTypes OBJECT IDENTIFIER ::= { iscsiDescriptors 2 }
+
+iscsiDataIntegrityNone OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The authoritative identifier when no integrity
+        scheme (for either the header or data) is being
+        used."
+    REFERENCE
+        "RFC 3720, Section 12.1, HeaderDigest and DataDigest"
+::= { iscsiDataIntegrityTypes 1 }
+
+iscsiDataIntegrityCrc32c OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The authoritative identifier when the integrity
+        scheme (for either the header or data) is CRC32c."
+    REFERENCE
+        "RFC 3720, Section 12.1, HeaderDigest and DataDigest"
+::= { iscsiDataIntegrityTypes 2 }
+
+--**********************************************************************
+
+iscsiInstance OBJECT IDENTIFIER ::= { iscsiObjects 1 }
+
+-- Instance Attributes Table
+
+iscsiInstanceAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiInstanceAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of iSCSI instances present on the system."
+::= { iscsiInstance 1 }
+
+iscsiInstanceAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiInstanceAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular iSCSI instance."
+    INDEX { iscsiInstIndex }
+::= { iscsiInstanceAttributesTable 1 }
+
+IscsiInstanceAttributesEntry ::= SEQUENCE {
+    iscsiInstIndex                 Unsigned32,
+    iscsiInstDescr                 SnmpAdminString,
+    iscsiInstVersionMin            Unsigned32,
+    iscsiInstVersionMax            Unsigned32,
+    iscsiInstVendorID              SnmpAdminString,
+    iscsiInstVendorVersion         SnmpAdminString,
+    iscsiInstPortalNumber          Unsigned32,
+    iscsiInstNodeNumber            Unsigned32,
+    iscsiInstSessionNumber         Unsigned32,
+    iscsiInstSsnFailures           Counter32,
+    iscsiInstLastSsnFailureType    AutonomousType,
+    iscsiInstLastSsnRmtNodeName    IscsiName,
+    iscsiInstDiscontinuityTime     TimeStamp
+}
+
+iscsiInstIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a particular
+        iSCSI instance.  This index value must not be modified or
+        reused by an agent unless a reboot has occurred.  An agent
+        should attempt to keep this value persistent across reboots."
+::= { iscsiInstanceAttributesEntry 1 }
+
+iscsiInstDescr OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A UTF-8 string, determined by the implementation to
+        describe the iSCSI instance.  When only a single instance
+        is present, this object may be set to the zero-length
+        string; with multiple iSCSI instances, it may be used in
+        an implementation-dependent manner to describe the purpose
+        of the respective instance."
+::= { iscsiInstanceAttributesEntry 2 }
+
+iscsiInstVersionMin OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..255)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The minimum version number of the iSCSI specification
+        such that this iSCSI instance supports this minimum
+        value, the maximum value indicated by the corresponding
+        instance in iscsiInstVersionMax, and all versions in
+        between."
+    REFERENCE
+        "RFC 3720, Section 10.12, Login Request"
+::= { iscsiInstanceAttributesEntry 3 }
+
+iscsiInstVersionMax OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..255)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The maximum version number of the iSCSI specification
+        such that this iSCSI instance supports this maximum
+        value, the minimum value indicated by the corresponding
+        instance in iscsiInstVersionMin, and all versions in
+        between."
+    REFERENCE
+        "RFC 3720, Section 10.12, Login Request"
+::= { iscsiInstanceAttributesEntry 4 }
+
+iscsiInstVendorID OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A UTF-8 string describing the manufacturer of the
+        implementation of this instance."
+::= { iscsiInstanceAttributesEntry 5 }
+
+iscsiInstVendorVersion OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A UTF-8 string set by the manufacturer describing the
+        version of the implementation of this instance.  The
+        format of this string is determined solely by the
+        manufacturer, and is for informational purposes only.
+
+        It is unrelated to the iSCSI specification version numbers."
+::= { iscsiInstanceAttributesEntry 6 }
+
+iscsiInstPortalNumber OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "transport endpoints"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of rows in the iscsiPortalAttributesTable
+        that are currently associated with this iSCSI instance."
+::= { iscsiInstanceAttributesEntry 7 }
+
+iscsiInstNodeNumber OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "iSCSI nodes"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of rows in the iscsiNodeAttributesTable
+        that are currently associated with this iSCSI instance."
+::= { iscsiInstanceAttributesEntry 8 }
+
+iscsiInstSessionNumber OBJECT-TYPE
+    SYNTAX        Unsigned32
+    UNITS         "sessions"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of rows in the iscsiSessionAttributesTable
+        that are currently associated with this iSCSI instance."
+::= { iscsiInstanceAttributesEntry 9 }
+
+iscsiInstSsnFailures  OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "sessions"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object counts the number of times a session belonging
+        to this instance has been failed.  If this counter has
+        suffered a discontinuity, the time of the last discontinuity
+        is indicated in iscsiInstDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 12.1, HeaderDigest and DataDigest"
+::= { iscsiInstanceAttributesEntry 10 }
+
+iscsiInstLastSsnFailureType  OBJECT-TYPE
+    SYNTAX        AutonomousType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The counter object in the iscsiInstSsnErrorStatsTable
+        that was incremented when the last session failure occurred.
+
+        If the reason for failure is not found in the
+        iscsiInstSsnErrorStatsTable, the value { 0.0 } is
+        used instead."
+::= { iscsiInstanceAttributesEntry 11 }
+
+iscsiInstLastSsnRmtNodeName  OBJECT-TYPE
+    SYNTAX        IscsiName
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The iSCSI name of the remote node from the failed
+        session."
+::= { iscsiInstanceAttributesEntry 12 }
+
+iscsiInstDiscontinuityTime  OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The value of SysUpTime on the most recent occasion
+        at which any one or more of this instance's counters
+        suffered a discontinuity.
+
+        If no such discontinuities have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+::= { iscsiInstanceAttributesEntry 13 }
+
+-- Instance Session Failure Stats Table
+
+iscsiInstanceSsnErrorStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiInstanceSsnErrorStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "Statistics regarding the occurrences of error types
+        that result in a session failure."
+::= { iscsiInstance 2 }
+
+iscsiInstanceSsnErrorStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiInstanceSsnErrorStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular iSCSI instance."
+    AUGMENTS { iscsiInstanceAttributesEntry }
+::= { iscsiInstanceSsnErrorStatsTable 1 }
+
+IscsiInstanceSsnErrorStatsEntry ::= SEQUENCE {
+    iscsiInstSsnDigestErrors       Counter32,
+    iscsiInstSsnCxnTimeoutErrors   Counter32,
+    iscsiInstSsnFormatErrors       Counter32
+}
+
+iscsiInstSsnDigestErrors OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "sessions"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of sessions that were failed due to receipt of
+        a PDU containing header or data digest errors.  If this
+        counter has suffered a discontinuity, the time of the last
+        discontinuity is indicated in iscsiInstDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 6.7, Digest Errors"
+::= { iscsiInstanceSsnErrorStatsEntry 1 }
+
+iscsiInstSsnCxnTimeoutErrors OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "sessions"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of sessions that were failed due to a sequence
+        exceeding a time limit.  If this counter has suffered a
+        discontinuity, the time of the last discontinuity
+        is indicated in iscsiInstDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 6.4, Connection Timeout Management"
+::= { iscsiInstanceSsnErrorStatsEntry 2 }
+
+iscsiInstSsnFormatErrors OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "sessions"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of sessions that were failed due to receipt of
+        a PDU that contained a format error.  If this counter has
+        suffered a discontinuity, the time of the last discontinuity
+        is indicated in iscsiInstDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 6.6, Format Errors"
+::= { iscsiInstanceSsnErrorStatsEntry 3 }
+
+--**********************************************************************
+
+iscsiPortal OBJECT IDENTIFIER ::= { iscsiObjects 2 }
+
+-- Portal Attributes Table
+
+iscsiPortalAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiPortalAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of transport endpoints (using TCP or another transport
+        protocol) used by this iSCSI instance.  An iSCSI instance may
+        use a portal to listen for incoming connections to its targets,
+        to initiate connections to other targets, or both."
+::= { iscsiPortal 1 }
+
+iscsiPortalAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiPortalAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular portal instance."
+    INDEX { iscsiInstIndex, iscsiPortalIndex  }
+::= { iscsiPortalAttributesTable 1 }
+
+IscsiPortalAttributesEntry ::= SEQUENCE {
+    iscsiPortalIndex               Unsigned32,
+    iscsiPortalRowStatus           RowStatus,
+    iscsiPortalRoles               BITS,
+    iscsiPortalAddrType            InetAddressType,
+    iscsiPortalAddr                InetAddress,
+    iscsiPortalProtocol            IscsiTransportProtocol,
+    iscsiPortalMaxRecvDataSegLength Unsigned32,
+    iscsiPortalPrimaryHdrDigest    IscsiDigestMethod,
+    iscsiPortalPrimaryDataDigest   IscsiDigestMethod,
+    iscsiPortalSecondaryHdrDigest  IscsiDigestMethod,
+    iscsiPortalSecondaryDataDigest IscsiDigestMethod,
+    iscsiPortalRecvMarker          TruthValue,
+    iscsiPortalStorageType         StorageType
+}
+
+iscsiPortalIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a particular
+        transport endpoint within this iSCSI instance.  This index
+        value must not be modified or reused by an agent unless a
+        reboot has occurred.  An agent should attempt to keep this
+        value persistent across reboots."
+::= { iscsiPortalAttributesEntry 1 }
+
+iscsiPortalRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        When the value of this object is 'active', the values of
+        the other objects in this table cannot be changed.
+        Rows may be discarded using RowStatus.
+
+        Note that creating a row in this table will typically
+        cause the agent to create one or more rows in
+        iscsiTgtPortalAttributesTable and/or
+        iscsiIntrPortalAttributesTable."
+::= { iscsiPortalAttributesEntry 2 }
+
+iscsiPortalRoles OBJECT-TYPE
+    SYNTAX        BITS {
+                      targetTypePortal(0),
+                      initiatorTypePortal(1)
+                  }
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A portal can operate in one or both of two roles:
+        as a target portal and/or an initiator portal.  If
+        the portal will operate in both roles, both bits
+        must be set.
+
+        This object will define a corresponding row that
+
+        will exist or must be created in the
+        iscsiTgtPortalAttributesTable, the
+        iscsiIntrPortalAttributesTable or both.  If the
+        targetTypePortal bit is set, one or more corresponding
+        iscsiTgtPortalAttributesEntry rows will be found or
+        created.  If the initiatorTypePortal bit is set,
+        one or more corresponding iscsiIntrPortalAttributesEntry
+        rows will be found or created.  If both bits are set, one
+        or more corresponding rows will be found or created in
+        one of the above tables."
+::= { iscsiPortalAttributesEntry 3 }
+
+iscsiPortalAddrType OBJECT-TYPE
+    SYNTAX        InetAddressType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The type of Internet Network Address contained in the
+        corresponding instance of the iscsiPortalAddr."
+    DEFVAL        { ipv4 }
+::= { iscsiPortalAttributesEntry 4 }
+
+iscsiPortalAddr OBJECT-TYPE
+    SYNTAX        InetAddress
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The portal's Internet Network Address, of the type
+        specified by the object iscsiPortalAddrType.  If
+        iscsiPortalAddrType has the value 'dns', this address
+        gets resolved to an IP address whenever a new iSCSI
+        connection is established using this portal."
+::= { iscsiPortalAttributesEntry 5 }
+
+iscsiPortalProtocol OBJECT-TYPE
+    SYNTAX        IscsiTransportProtocol
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The portal's transport protocol."
+    DEFVAL        { 6 } -- TCP
+::= { iscsiPortalAttributesEntry 6 }
+
+iscsiPortalMaxRecvDataSegLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The maximum PDU length this portal can receive.
+        This may be constrained by hardware characteristics
+        and individual implementations may choose not to
+        allow this object to be changed."
+    REFERENCE
+        "RFC 3720, Section 12.12, MaxRecvDataSegmentLength"
+    DEFVAL { 8192 }
+::= { iscsiPortalAttributesEntry 7 }
+
+iscsiPortalPrimaryHdrDigest OBJECT-TYPE
+    SYNTAX        IscsiDigestMethod
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The preferred header digest for this portal."
+    DEFVAL        { crc32c }
+::= { iscsiPortalAttributesEntry 8 }
+
+iscsiPortalPrimaryDataDigest OBJECT-TYPE
+    SYNTAX        IscsiDigestMethod
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The preferred data digest method for this portal."
+    DEFVAL        { crc32c }
+::= { iscsiPortalAttributesEntry 9 }
+
+iscsiPortalSecondaryHdrDigest OBJECT-TYPE
+    SYNTAX        IscsiDigestMethod
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "An alternate header digest preference for this portal."
+    DEFVAL        { noDigest }
+::= { iscsiPortalAttributesEntry 10 }
+
+iscsiPortalSecondaryDataDigest OBJECT-TYPE
+    SYNTAX        IscsiDigestMethod
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "An alternate data digest preference for this portal."
+    DEFVAL        { noDigest }
+::= { iscsiPortalAttributesEntry 11 }
+
+iscsiPortalRecvMarker OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object indicates whether or not this portal will
+        request markers in its incoming data stream."
+    REFERENCE
+        "RFC 3720, Appendix A."
+    DEFVAL        { false }
+::= { iscsiPortalAttributesEntry 12 }
+
+iscsiPortalStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that were
+         created through an external process may have a storage type of
+         readOnly or permanent.
+
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { iscsiPortalAttributesEntry 13 }
+
+--**********************************************************************
+iscsiTargetPortal OBJECT IDENTIFIER ::= { iscsiObjects 3 }
+
+-- Target Portal Attributes Table
+
+iscsiTgtPortalAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiTgtPortalAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of transport endpoints (using TCP or another transport
+        protocol) on which this iSCSI instance listens for incoming
+        connections to its targets."
+::= { iscsiTargetPortal 1 }
+
+iscsiTgtPortalAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiTgtPortalAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular portal instance that is used to listen for
+        incoming connections to local targets.  One or more rows in
+        this table is populated by the agent for each
+
+        iscsiPortalAttributesEntry row that has the bit
+        targetTypePortal set in its iscsiPortalRoles column."
+    INDEX { iscsiInstIndex, iscsiPortalIndex,
+            iscsiTgtPortalNodeIndexOrZero  }
+::= { iscsiTgtPortalAttributesTable 1 }
+
+IscsiTgtPortalAttributesEntry ::= SEQUENCE {
+    iscsiTgtPortalNodeIndexOrZero  Unsigned32,
+    iscsiTgtPortalPort             InetPortNumber,
+    iscsiTgtPortalTag              Unsigned32
+}
+
+iscsiTgtPortalNodeIndexOrZero OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular node within an iSCSI instance present
+        on the local system.
+
+        For implementations where each {portal, node} tuple
+        can have a different portal tag, this value will
+        map to the iscsiNodeIndex.
+
+        For implementations where the portal tag is the
+        same for a given portal regardless of which node
+        is using the portal, the value 0 (zero) is used."
+::= { iscsiTgtPortalAttributesEntry 1 }
+
+iscsiTgtPortalPort OBJECT-TYPE
+    SYNTAX        InetPortNumber (1..65535)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The portal's transport protocol port number on which the
+        portal listens for incoming iSCSI connections when the
+        portal is used as a target portal.  This object's storage
+        type is specified in iscsiPortalStorageType."
+::= { iscsiTgtPortalAttributesEntry 2 }
+
+iscsiTgtPortalTag OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The portal's aggregation tag when the portal is used as
+        a target portal.  Multiple-connection sessions may
+
+        be aggregated over portals sharing an identical
+        aggregation tag.  This object's storage type is
+        specified in iscsiPortalStorageType."
+    REFERENCE
+        "RFC 3720, Section 3.4.1, iSCSI Architectural Model"
+::= { iscsiTgtPortalAttributesEntry 3 }
+
+--**********************************************************************
+
+iscsiInitiatorPortal OBJECT IDENTIFIER ::= { iscsiObjects 4 }
+
+-- Initiator Portal Attributes Table
+
+iscsiIntrPortalAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiIntrPortalAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of Internet Network Addresses (using TCP or another
+        transport protocol) from which this iSCSI instance may
+        initiate connections to other targets."
+::= { iscsiInitiatorPortal 1 }
+
+iscsiIntrPortalAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiIntrPortalAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular portal instance that is used to initiate
+        connections to iSCSI targets.  One or more rows in
+        this table is populated by the agent for each
+        iscsiPortalAttributesEntry row that has the bit
+        initiatorTypePortal set in its iscsiPortalRoles column."
+    INDEX { iscsiInstIndex, iscsiPortalIndex,
+            iscsiIntrPortalNodeIndexOrZero  }
+::= { iscsiIntrPortalAttributesTable 1 }
+
+IscsiIntrPortalAttributesEntry ::= SEQUENCE {
+    iscsiIntrPortalNodeIndexOrZero Unsigned32,
+    iscsiIntrPortalTag             Unsigned32
+}
+
+iscsiIntrPortalNodeIndexOrZero OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular node within an iSCSI instance present
+        on the local system.
+
+        For implementations where each {portal, node} tuple
+        can have a different portal tag, this value will
+        map to the iscsiNodeIndex.
+
+        For implementations where the portal tag is the
+        same for a given portal regardless of which node
+        is using the portal, the value 0 (zero) is used."
+::= { iscsiIntrPortalAttributesEntry 1 }
+
+iscsiIntrPortalTag OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The portal's aggregation tag when the portal is used as
+        an initiator portal.  Multiple-connection sessions may
+        be aggregated over portals sharing an identical
+        aggregation tag.  This object's storage type is
+        specified in iscsiPortalStorageType."
+    REFERENCE
+        "RFC 3720, Section 3.4.1, iSCSI Architectural Model"
+::= { iscsiIntrPortalAttributesEntry 2 }
+
+--**********************************************************************
+
+iscsiNode OBJECT IDENTIFIER ::= { iscsiObjects 5 }
+
+-- Node Attributes Table
+
+iscsiNodeAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiNodeAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of iSCSI nodes belonging to each iSCSI instance
+        present on the local system.  An iSCSI node can act as
+        an initiator, a target, or both."
+::= { iscsiNode 1 }
+
+iscsiNodeAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiNodeAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular iSCSI node."
+    INDEX { iscsiInstIndex, iscsiNodeIndex }
+::= { iscsiNodeAttributesTable 1 }
+
+IscsiNodeAttributesEntry ::= SEQUENCE {
+    iscsiNodeIndex                  Unsigned32,
+    iscsiNodeName                   IscsiName,
+    iscsiNodeAlias                  SnmpAdminString,
+    iscsiNodeRoles                  BITS,
+    iscsiNodeTransportType          RowPointer,
+    iscsiNodeInitialR2T             TruthValue,
+    iscsiNodeImmediateData          TruthValue,
+    iscsiNodeMaxOutstandingR2T      Unsigned32,
+    iscsiNodeFirstBurstLength       Unsigned32,
+    iscsiNodeMaxBurstLength         Unsigned32,
+    iscsiNodeMaxConnections         Unsigned32,
+    iscsiNodeDataSequenceInOrder    TruthValue,
+    iscsiNodeDataPDUInOrder         TruthValue,
+    iscsiNodeDefaultTime2Wait       Unsigned32,
+    iscsiNodeDefaultTime2Retain     Unsigned32,
+    iscsiNodeErrorRecoveryLevel     Unsigned32,
+    iscsiNodeDiscontinuityTime      TimeStamp,
+    iscsiNodeStorageType            StorageType
+}
+
+iscsiNodeIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a particular
+        node within an iSCSI instance.  This index value must not be
+        modified or reused by an agent unless a reboot has occurred.
+        An agent should attempt to keep this value persistent across
+        reboots."
+::= { iscsiNodeAttributesEntry 1 }
+
+iscsiNodeName OBJECT-TYPE
+    SYNTAX        IscsiName
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This node's iSCSI name, which is independent of the location
+        of the node, and can be resolved into a set of addresses
+        through various discovery services."
+::= { iscsiNodeAttributesEntry 2 }
+
+iscsiNodeAlias OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A character string that is a human-readable name or
+        description of the iSCSI node.  If configured, this alias
+        may be communicated to the initiator or target node at
+        the remote end of the connection during a Login Request
+        or Response message.  This string is not used as an
+        identifier, but can be displayed by the system's user
+        interface in a list of initiators and/or targets to
+        which it is connected.
+
+        If no alias exists, the value is a zero-length string."
+    REFERENCE
+        "RFC 3720, Section 12.6, TargetAlias, 12.7, InitiatorAlias"
+::= { iscsiNodeAttributesEntry 3 }
+
+iscsiNodeRoles OBJECT-TYPE
+    SYNTAX        BITS {
+                      targetTypeNode(0),
+                      initiatorTypeNode(1)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A node can operate in one or both of two roles:
+        a target role and/or an initiator role.  If the node
+        will operate in both roles, both bits must be set.
+
+        This object will also define the corresponding rows that
+        will exist in the iscsiTargetAttributesTable, the
+        iscsiInitiatorAttributesTable or both.  If the
+        targetTypeNode bit is set, there will be a corresponding
+        iscsiTargetAttributesEntry.  If the initiatorTypeNode bit
+        is set, there will be a corresponding
+        iscsiInitiatorAttributesEntry.  If both bits are set,
+        there will be a corresponding iscsiTgtPortalAttributesEntry
+        and iscsiPortalAttributesEntry."
+::= { iscsiNodeAttributesEntry 4 }
+
+iscsiNodeTransportType OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A pointer to the corresponding row in the appropriate
+
+        table for this SCSI transport, thereby allowing management
+        stations to locate the SCSI-level device that is represented
+        by this iscsiNode.  For example, it will usually point to the
+        corresponding scsiTrnspt object in the SCSI MIB module.
+
+        If no corresponding row exists, the value 0.0 must be
+        used to indicate this."
+    REFERENCE
+        "SCSI-MIB"
+::= { iscsiNodeAttributesEntry 5 }
+
+iscsiNodeInitialR2T OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object indicates the InitialR2T preference for this
+        node:
+        true = YES,
+        false = will try to negotiate NO, will accept YES "
+    REFERENCE
+        "RFC 3720, Section 12.10, InitialR2T"
+::= { iscsiNodeAttributesEntry 6 }
+
+iscsiNodeImmediateData OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "This object indicates ImmediateData preference for this
+        node:
+        true = YES (but will accept NO),
+        false = NO "
+    REFERENCE
+        "RFC 3720, Section 12.11, ImmediateData"
+    DEFVAL        { true }
+::= { iscsiNodeAttributesEntry 7 }
+
+iscsiNodeMaxOutstandingR2T OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    UNITS         "R2Ts"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "Maximum number of outstanding requests-to-transmit (R2Ts)
+        allowed per iSCSI task."
+    REFERENCE
+        "RFC 3720, Section 12.17, MaxOutstandingR2T"
+    DEFVAL        { 1 }
+::= { iscsiNodeAttributesEntry 8 }
+
+iscsiNodeFirstBurstLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The maximum length (bytes) supported for unsolicited data
+        to/from this node."
+    REFERENCE
+        "RFC 3720, Section 12.14, FirstBurstLength"
+    DEFVAL        { 65536 }
+::= { iscsiNodeAttributesEntry 9 }
+
+iscsiNodeMaxBurstLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+     "The maximum number of bytes that can be sent within
+     a single sequence of Data-In or Data-Out PDUs."
+    REFERENCE
+        "RFC 3720, Section 12.13, MaxBurstLength"
+    DEFVAL        { 262144 }
+::= { iscsiNodeAttributesEntry 10 }
+
+iscsiNodeMaxConnections OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    UNITS         "connections"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The maximum number of connections allowed in each
+        session to and/or from this node."
+    REFERENCE
+        "RFC 3720, Section 12.2, MaxConnections"
+    DEFVAL        { 1 }
+::= { iscsiNodeAttributesEntry 11 }
+
+iscsiNodeDataSequenceInOrder OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The DataSequenceInOrder preference of this node.
+
+        False (=No) indicates that iSCSI data PDU sequences may
+        be transferred in any order.  True (=Yes) indicates that
+        data PDU sequences must be transferred using
+        continuously increasing offsets, except during
+        error recovery."
+    REFERENCE
+        "RFC 3720, Section 12.19, DataSequenceInOrder"
+    DEFVAL        { true }
+::= { iscsiNodeAttributesEntry 12 }
+
+iscsiNodeDataPDUInOrder OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The DataPDUInOrder preference of this node.
+        False (=No) indicates that iSCSI data PDUs within sequences
+        may be in any order.  True (=Yes) indicates that data PDUs
+        within sequences must be at continuously increasing
+        addresses, with no gaps or overlay between PDUs."
+    REFERENCE
+        "RFC 3720, Section 12.18, DataPDUInOrder"
+    DEFVAL        { true }
+::= { iscsiNodeAttributesEntry 13 }
+
+iscsiNodeDefaultTime2Wait OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3600)
+    UNITS         "seconds"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The DefaultTime2Wait preference of this node.  This is the
+        minimum time, in seconds, to wait before attempting an
+        explicit/implicit logout or active iSCSI task reassignment
+        after an unexpected connection termination or a connection
+        reset."
+    REFERENCE
+        "RFC 3720, Section 12.15, DefaultTime2Wait"
+    DEFVAL        { 2 }
+::= { iscsiNodeAttributesEntry 14 }
+
+iscsiNodeDefaultTime2Retain OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..3600)
+    UNITS         "seconds"
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The DefaultTime2Retain preference of this node.  This is
+
+        the maximum time, in seconds after an initial wait
+        (Time2Wait), before which an active iSCSI task reassignment
+        is still possible after an unexpected connection termination
+        or a connection reset."
+    REFERENCE
+        "RFC 3720, Section 12.16, DefaultTime2Retain"
+    DEFVAL        { 20 }
+::= { iscsiNodeAttributesEntry 15 }
+
+iscsiNodeErrorRecoveryLevel OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..255)
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The ErrorRecoveryLevel preference of this node.
+        Currently, only 0-2 are valid.
+
+        This object is designed to accommodate future error recovery
+        levels.
+
+        Higher error recovery levels imply support in addition to
+        support for the lower error level functions.  In other words,
+        error level 2 implies support for levels 0-1, since those
+        functions are subsets of error level 2."
+    REFERENCE
+        "RFC 3720, Section 12.20, ErrorRecoveryLevel"
+    DEFVAL        { 0 }
+::= { iscsiNodeAttributesEntry 16 }
+
+iscsiNodeDiscontinuityTime  OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The value of SysUpTime on the most recent occasion
+        at which any one or more of this node's counters
+        suffered a discontinuity.
+
+        If no such discontinuities have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+::= { iscsiNodeAttributesEntry 17 }
+
+iscsiNodeStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "The storage type for all read-write objects within this
+        row.  Rows in this table are always created via an
+        external process, and may have a storage type of readOnly
+        or permanent.  Conceptual rows having the value 'permanent'
+        need not allow write access to any columnar objects in
+        the row.
+
+        If this object has the value 'volatile', modifications
+        to read-write objects in this row are not persistent
+        across reboots.  If this object has the value
+        'nonVolatile', modifications to objects in this row
+        are persistent.
+
+        An implementation may choose to allow this object
+        to be set to either 'nonVolatile' or 'volatile',
+        allowing the management application to choose this
+        behavior."
+    DEFVAL        { volatile }
+::= { iscsiNodeAttributesEntry 18 }
+
+--**********************************************************************
+
+iscsiTarget OBJECT IDENTIFIER ::= { iscsiObjects 6 }
+
+-- Target Attributes Table
+
+iscsiTargetAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiTargetAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of iSCSI nodes that can take on a target role,
+        belonging to each iSCSI instance present on the local
+        system."
+::= { iscsiTarget 1 }
+
+iscsiTargetAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiTargetAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular node that can take on a target role."
+    INDEX { iscsiInstIndex, iscsiNodeIndex }
+::= { iscsiTargetAttributesTable 1 }
+
+IscsiTargetAttributesEntry ::= SEQUENCE {
+    iscsiTgtLoginFailures           Counter32,
+    iscsiTgtLastFailureTime         TimeStamp,
+    iscsiTgtLastFailureType         AutonomousType,
+    iscsiTgtLastIntrFailureName     IscsiName,
+    iscsiTgtLastIntrFailureAddrType InetAddressType,
+    iscsiTgtLastIntrFailureAddr     InetAddress
+}
+
+iscsiTgtLoginFailures OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed login attempts"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object counts the number of times a login attempt to this
+        local target has failed.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiTargetAttributesEntry 1 }
+
+iscsiTgtLastFailureTime OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The timestamp of the most recent failure of a login attempt
+        to this target.  A value of zero indicates that no such
+        failures have occurred since the last system boot."
+::= { iscsiTargetAttributesEntry 2 }
+
+iscsiTgtLastFailureType  OBJECT-TYPE
+    SYNTAX        AutonomousType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of the most recent failure of a login attempt
+        to this target, represented as the OID of the counter
+        object in iscsiTargetLoginStatsTable for which the
+        relevant instance was incremented.  A value of 0.0
+        indicates a type that is not represented by any of
+        the counters in iscsiTargetLoginStatsTable."
+::= { iscsiTargetAttributesEntry 3 }
+
+iscsiTgtLastIntrFailureName  OBJECT-TYPE
+    SYNTAX        IscsiName
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The iSCSI name of the initiator that failed the last
+        login attempt."
+::= { iscsiTargetAttributesEntry 4 }
+
+iscsiTgtLastIntrFailureAddrType OBJECT-TYPE
+    SYNTAX        InetAddressType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of Internet Network Address contained in the
+        corresponding instance of the iscsiTgtLastIntrFailureAddr.
+        The value 'dns' is not allowed."
+::= { iscsiTargetAttributesEntry 5 }
+
+iscsiTgtLastIntrFailureAddr OBJECT-TYPE
+    SYNTAX        InetAddress
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "An Internet Network Address, of the type specified by
+        the object iscsiTgtLastIntrFailureAddrType, giving the
+        host address of the initiator that failed the last login
+        attempt."
+::= { iscsiTargetAttributesEntry 6 }
+
+-- Target Login Stats Table
+
+iscsiTargetLoginStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiTargetLoginStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A table of counters that keep a record of the results
+        of initiators' login attempts to this target."
+::= { iscsiTarget 2 }
+
+iscsiTargetLoginStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiTargetLoginStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing counters for each result of
+        a login attempt to this target."
+    AUGMENTS { iscsiTargetAttributesEntry }
+::= { iscsiTargetLoginStatsTable 1 }
+
+IscsiTargetLoginStatsEntry ::= SEQUENCE {
+
+    iscsiTgtLoginAccepts           Counter32,
+    iscsiTgtLoginOtherFails        Counter32,
+    iscsiTgtLoginRedirects         Counter32,
+    iscsiTgtLoginAuthorizeFails    Counter32,
+    iscsiTgtLoginAuthenticateFails Counter32,
+    iscsiTgtLoginNegotiateFails    Counter32
+}
+
+iscsiTgtLoginAccepts OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "successful logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status
+        0x0000, Accept Login, transmitted by this
+        target.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiTargetLoginStatsEntry 1 }
+
+iscsiTgtLoginOtherFails OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of Login Response PDUs that were transmitted
+        by this target and that were not counted by any other
+        object in the row.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiTargetLoginStatsEntry 2 }
+
+iscsiTgtLoginRedirects OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "redirected logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status class 0x01,
+        Redirection, transmitted by this target.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiTargetLoginStatsEntry 3 }
+
+iscsiTgtLoginAuthorizeFails OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status 0x0202,
+        Forbidden Target, transmitted by this target.
+
+        If this counter is incremented, an iscsiTgtLoginFailure
+        notification should be generated.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiTargetLoginStatsEntry 4 }
+
+iscsiTgtLoginAuthenticateFails OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status 0x0201,
+        Authentication Failed, transmitted by this target.
+
+        If this counter is incremented, an iscsiTgtLoginFailure
+        notification should be generated.
+
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiTargetLoginStatsEntry 5 }
+
+iscsiTgtLoginNegotiateFails OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of times a target has effectively refused a
+        login because the parameter negotiation failed.
+
+        If this counter is incremented, an iscsiTgtLoginFailure
+        notification should be generated.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+::= { iscsiTargetLoginStatsEntry 6 }
+
+-- Target Logout Stats Table
+
+iscsiTargetLogoutStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiTargetLogoutStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "When a target receives a Logout command, it responds
+        with a Logout Response that carries a status code.
+        This table contains counters for both normal and
+        abnormal logout requests received by this target."
+::= { iscsiTarget 3 }
+
+iscsiTargetLogoutStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiTargetLogoutStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing counters of Logout Response
+        PDUs that were received by this target."
+    AUGMENTS { iscsiTargetAttributesEntry }
+::= { iscsiTargetLogoutStatsTable 1 }
+
+IscsiTargetLogoutStatsEntry ::= SEQUENCE {
+    iscsiTgtLogoutNormals          Counter32,
+    iscsiTgtLogoutOthers           Counter32
+}
+
+iscsiTgtLogoutNormals OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "normal logouts"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Logout Command PDUs received by this target,
+        with reason code 0 (closes the session).
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.14.1, Reason Code"
+::= { iscsiTargetLogoutStatsEntry 1 }
+
+iscsiTgtLogoutOthers OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "abnormal logouts"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Logout Command PDUs received by this target,
+        with any reason code other than 0.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.14.1, Reason Code"
+::= { iscsiTargetLogoutStatsEntry 2 }
+
+--**********************************************************************
+
+iscsiTgtAuthorization OBJECT IDENTIFIER ::= { iscsiObjects 7 }
+
+-- Target Authorization Attributes Table
+
+iscsiTgtAuthAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiTgtAuthAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of initiator identities that are authorized to
+        access each target node within each iSCSI instance
+        present on the local system."
+::= { iscsiTgtAuthorization 1 }
+
+iscsiTgtAuthAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiTgtAuthAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a particular target node's authorized
+        initiator identity."
+    INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiTgtAuthIndex }
+::= { iscsiTgtAuthAttributesTable 1 }
+
+IscsiTgtAuthAttributesEntry ::= SEQUENCE {
+    iscsiTgtAuthIndex              Unsigned32,
+    iscsiTgtAuthRowStatus          RowStatus,
+    iscsiTgtAuthIdentity           RowPointer,
+    iscsiTgtAuthStorageType        StorageType
+}
+
+iscsiTgtAuthIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a particular
+        target's authorized initiator identity within an iSCSI
+        instance present on the local system.  This index value must
+        not be modified or reused by an agent unless a reboot has
+        occurred.  An agent should attempt to keep this value
+        persistent across reboots."
+::= { iscsiTgtAuthAttributesEntry 1 }
+
+iscsiTgtAuthRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        When the value of this object is 'active', the values of
+        the other objects in this table cannot be changed.
+        Rows may be discarded using RowStatus."
+::= { iscsiTgtAuthAttributesEntry 2 }
+
+iscsiTgtAuthIdentity OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A pointer to the corresponding user entry in the IPS-AUTH
+        MIB module that will be allowed to access this iSCSI target."
+    REFERENCE
+        "IPS-AUTH MIB, RFC 4545"
+::= { iscsiTgtAuthAttributesEntry 3 }
+
+iscsiTgtAuthStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that were
+         created through an external process may have a storage type of
+         readOnly or permanent.
+
+         Conceptual rows having the value 'permanent' need not
+         allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { iscsiTgtAuthAttributesEntry 4 }
+
+--**********************************************************************
+
+iscsiInitiator OBJECT IDENTIFIER ::= { iscsiObjects 8 }
+
+-- Initiator Attributes Table
+
+iscsiInitiatorAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiInitiatorAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of iSCSI nodes that can take on an initiator
+        role, belonging to each iSCSI instance present on
+        the local system."
+::= { iscsiInitiator 1 }
+
+iscsiInitiatorAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiInitiatorAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information
+        applicable to a particular iSCSI node that has
+        initiator capabilities."
+    INDEX  { iscsiInstIndex, iscsiNodeIndex }
+::= { iscsiInitiatorAttributesTable 1 }
+
+IscsiInitiatorAttributesEntry ::= SEQUENCE {
+    iscsiIntrLoginFailures         Counter32,
+    iscsiIntrLastFailureTime       TimeStamp,
+    iscsiIntrLastFailureType       AutonomousType,
+    iscsiIntrLastTgtFailureName    IscsiName,
+    iscsiIntrLastTgtFailureAddrType InetAddressType,
+    iscsiIntrLastTgtFailureAddr    InetAddress
+}
+
+iscsiIntrLoginFailures OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object counts the number of times a login attempt from
+        this local initiator has failed.
+        If this counter has suffered a discontinuity, the time of the
+
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiInitiatorAttributesEntry 1 }
+
+iscsiIntrLastFailureTime OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The timestamp of the most recent failure of a login attempt
+        from this initiator.  A value of zero indicates that no such
+        failures have occurred since the last system boot."
+::= { iscsiInitiatorAttributesEntry 2 }
+
+iscsiIntrLastFailureType  OBJECT-TYPE
+    SYNTAX        AutonomousType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of the most recent failure of a login attempt
+        from this initiator, represented as the OID of the counter
+        object in iscsiInitiatorLoginStatsTable for which the
+        relevant instance was incremented.  A value of 0.0
+        indicates a type that is not represented by any of
+        the counters in iscsiInitiatorLoginStatsTable."
+::= { iscsiInitiatorAttributesEntry 3 }
+
+iscsiIntrLastTgtFailureName  OBJECT-TYPE
+    SYNTAX        IscsiName
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A UTF-8 string giving the name of the target that failed
+        the last login attempt."
+::= { iscsiInitiatorAttributesEntry 4 }
+
+iscsiIntrLastTgtFailureAddrType OBJECT-TYPE
+    SYNTAX        InetAddressType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of Internet Network Address contained in the
+        corresponding instance of the iscsiIntrLastTgtFailureAddr.
+        The value 'dns' is not allowed."
+::= { iscsiInitiatorAttributesEntry 5 }
+
+iscsiIntrLastTgtFailureAddr OBJECT-TYPE
+    SYNTAX        InetAddress
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "An Internet Network Address, of the type specified by the
+        object iscsiIntrLastTgtFailureAddrType, giving the host
+        address of the target that failed the last login attempt."
+::= { iscsiInitiatorAttributesEntry 6 }
+
+-- Initiator Login Stats Table
+
+iscsiInitiatorLoginStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiInitiatorLoginStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A table of counters which keep track of the results of
+        this initiator's login attempts."
+::= { iscsiInitiator 2 }
+
+iscsiInitiatorLoginStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiInitiatorLoginStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing counters of each result
+        of this initiator's login attempts."
+    AUGMENTS { iscsiInitiatorAttributesEntry }
+::= { iscsiInitiatorLoginStatsTable 1 }
+
+IscsiInitiatorLoginStatsEntry ::= SEQUENCE {
+    iscsiIntrLoginAcceptRsps       Counter32,
+    iscsiIntrLoginOtherFailRsps    Counter32,
+    iscsiIntrLoginRedirectRsps     Counter32,
+    iscsiIntrLoginAuthFailRsps     Counter32,
+    iscsiIntrLoginAuthenticateFails Counter32,
+    iscsiIntrLoginNegotiateFails   Counter32
+}
+
+iscsiIntrLoginAcceptRsps OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "successful logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status
+        0x0000, Accept Login, received by this initiator.
+        If this counter has suffered a discontinuity, the time of the
+
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiInitiatorLoginStatsEntry 1 }
+
+iscsiIntrLoginOtherFailRsps OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs received by this
+        initiator with any status code not counted in the
+        objects below.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiInitiatorLoginStatsEntry 2 }
+
+iscsiIntrLoginRedirectRsps OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status class 0x01,
+        Redirection, received by this initiator.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiInitiatorLoginStatsEntry 3 }
+
+iscsiIntrLoginAuthFailRsps OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Login Response PDUs with status class 0x201,
+        Authentication Failed, received by this initiator.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiInitiatorLoginStatsEntry 4 }
+
+iscsiIntrLoginAuthenticateFails OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of times the initiator has aborted a
+        login because the target could not be authenticated.
+
+        No response is generated.
+
+        If this counter is incremented, an iscsiIntrLoginFailure
+        notification should be generated.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.13.5, Status-Class and Status-Detail"
+::= { iscsiInitiatorLoginStatsEntry 5 }
+
+iscsiIntrLoginNegotiateFails OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "failed logins"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of times the initiator has aborted a
+        login because parameter negotiation with the target
+        failed.
+
+        No response is generated.
+
+        If this counter is incremented, an iscsiIntrLoginFailure
+        notification should be generated.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 6.10, Negotiation Failures"
+::= { iscsiInitiatorLoginStatsEntry 6 }
+
+-- Initiator Logout Stats Table
+
+iscsiInitiatorLogoutStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiInitiatorLogoutStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "When an initiator attempts to send a Logout command, the target
+        responds with a Logout Response that carries a status code.
+
+        This table contains a list of counters of Logout Response
+        PDUs of each status code that was received by each
+        initiator belonging to this iSCSI instance present on this
+        system."
+::= { iscsiInitiator 3 }
+
+iscsiInitiatorLogoutStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiInitiatorLogoutStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing counters of Logout Response
+        PDUs of each status code that was generated by this
+        initiator."
+    AUGMENTS { iscsiInitiatorAttributesEntry }
+::= { iscsiInitiatorLogoutStatsTable 1 }
+
+IscsiInitiatorLogoutStatsEntry ::= SEQUENCE {
+    iscsiIntrLogoutNormals         Counter32,
+    iscsiIntrLogoutOthers          Counter32
+}
+
+iscsiIntrLogoutNormals OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "normal logouts"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Logout Command PDUs generated by this initiator
+        with reason code 0 (closes the session).
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.14.1, Reason Code"
+::= { iscsiInitiatorLogoutStatsEntry 1 }
+
+iscsiIntrLogoutOthers OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "abnormal logouts"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Logout Command PDUs generated by this initiator
+        with any status code other than 0.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiNodeDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 10.14.1, Reason Code"
+::= { iscsiInitiatorLogoutStatsEntry 2 }
+
+--**********************************************************************
+
+iscsiIntrAuthorization OBJECT IDENTIFIER ::= { iscsiObjects 9 }
+
+-- Initiator Authorization Attributes Table
+
+iscsiIntrAuthAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiIntrAuthAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of target identities that each initiator
+        on the local system may access."
+::= { iscsiIntrAuthorization 1 }
+
+iscsiIntrAuthAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiIntrAuthAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular initiator node's authorized target identity."
+    INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiIntrAuthIndex }
+::= { iscsiIntrAuthAttributesTable 1 }
+
+IscsiIntrAuthAttributesEntry ::= SEQUENCE {
+    iscsiIntrAuthIndex              Unsigned32,
+    iscsiIntrAuthRowStatus          RowStatus,
+    iscsiIntrAuthIdentity           RowPointer,
+    iscsiIntrAuthStorageType        StorageType
+}
+
+iscsiIntrAuthIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular initiator node's authorized target
+        identity within an iSCSI instance present on the
+        local system.  This index value must not be modified
+        or reused by an agent unless a reboot has occurred.
+        An agent should attempt to keep this value persistent
+        across reboots."
+::= { iscsiIntrAuthAttributesEntry 1 }
+
+iscsiIntrAuthRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This field allows entries to be dynamically added and
+        removed from this table via SNMP.  When adding a row to
+        this table, all non-Index/RowStatus objects must be set.
+        When the value of this object is 'active', the values of
+        the other objects in this table cannot be changed.
+        Rows may be discarded using RowStatus."
+::= { iscsiIntrAuthAttributesEntry 2 }
+
+iscsiIntrAuthIdentity OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "A pointer to the corresponding user entry in the IPS-AUTH
+        MIB module to which this initiator node should attempt to
+        establish an iSCSI session."
+    REFERENCE
+        "IPS-AUTH MIB, RFC 4545"
+::= { iscsiIntrAuthAttributesEntry 3 }
+
+iscsiIntrAuthStorageType OBJECT-TYPE
+    SYNTAX        StorageType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The storage type for this row.  Rows in this table that were
+        created through an external process may have a storage type of
+        readOnly or permanent.
+
+        Conceptual rows having the value 'permanent' need not
+        allow write access to any columnar objects in the row."
+    DEFVAL        { nonVolatile }
+::= { iscsiIntrAuthAttributesEntry 4 }
+
+--**********************************************************************
+
+iscsiSession OBJECT IDENTIFIER ::= { iscsiObjects 10 }
+
+-- Session Attributes Table
+
+iscsiSessionAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiSessionAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of sessions belonging to each iSCSI instance
+        present on the system."
+::= { iscsiSession 1 }
+
+iscsiSessionAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiSessionAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular session.
+
+        If this session is a discovery session that is not attached
+        to any particular node, the iscsiSsnNodeIndex will be zero.
+        Otherwise, the iscsiSsnNodeIndex will have the same value as
+        iscsiNodeIndex."
+    INDEX  { iscsiInstIndex, iscsiSsnNodeIndex, iscsiSsnIndex }
+::= { iscsiSessionAttributesTable 1 }
+
+IscsiSessionAttributesEntry ::= SEQUENCE {
+    iscsiSsnNodeIndex              Unsigned32,
+    iscsiSsnIndex                  Unsigned32,
+    iscsiSsnDirection              INTEGER,
+    iscsiSsnInitiatorName          IscsiName,
+    iscsiSsnTargetName             IscsiName,
+    iscsiSsnTSIH                   Unsigned32,
+    iscsiSsnISID                   OCTET STRING,
+    iscsiSsnInitiatorAlias         SnmpAdminString,
+    iscsiSsnTargetAlias            SnmpAdminString,
+    iscsiSsnInitialR2T             TruthValue,
+    iscsiSsnImmediateData          TruthValue,
+    iscsiSsnType                   INTEGER,
+    iscsiSsnMaxOutstandingR2T      Unsigned32,
+    iscsiSsnFirstBurstLength       Unsigned32,
+    iscsiSsnMaxBurstLength         Unsigned32,
+    iscsiSsnConnectionNumber       Gauge32,
+    iscsiSsnAuthIdentity           RowPointer,
+    iscsiSsnDataSequenceInOrder    TruthValue,
+    iscsiSsnDataPDUInOrder         TruthValue,
+    iscsiSsnErrorRecoveryLevel     Unsigned32,
+    iscsiSsnDiscontinuityTime      TimeStamp
+}
+
+iscsiSsnNodeIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular node within an iSCSI instance present
+        on the local system.  For normal, non-discovery
+        sessions, this value will map to the iscsiNodeIndex.
+        For discovery sessions that do not have a node
+        associated, the value 0 (zero) is used."
+::= { iscsiSessionAttributesEntry 1 }
+
+iscsiSsnIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular session within an iSCSI instance present
+        on the local system.  An agent should attempt to
+        not reuse index values unless a reboot has occurred.
+        iSCSI sessions are destroyed during a reboot; rows
+        in this table are not persistent across reboots."
+::= { iscsiSessionAttributesEntry 2 }
+
+iscsiSsnDirection OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      inboundSession(1),
+                      outboundSession(2)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Direction of iSCSI session:
+        inboundSession  - session is established from an external
+                          initiator to a target within this iSCSI
+                          instance.
+        outboundSession - session is established from an initiator
+                          within this iSCSI instance to an external
+                          target."
+::= { iscsiSessionAttributesEntry 3 }
+
+iscsiSsnInitiatorName OBJECT-TYPE
+    SYNTAX        IscsiName
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "If iscsiSsnDirection is Inbound, this object is a
+        UTF-8 string that will contain the name of the remote
+        initiator.  If this session is a discovery session that
+
+        does not specify a particular initiator, this object
+        will contain a zero-length string.
+
+        If iscsiSsnDirection is Outbound, this object will
+        contain a zero-length string."
+::= { iscsiSessionAttributesEntry 4 }
+
+iscsiSsnTargetName OBJECT-TYPE
+    SYNTAX        IscsiName
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "If iscsiSsnDirection is Outbound, this object is a
+        UTF-8 string that will contain the name of the remote
+        target.  If this session is a discovery session that
+        does not specify a particular target, this object will
+        contain a zero-length string.
+
+        If iscsiSsnDirection is Inbound, this object will
+        contain a zero-length string."
+::= { iscsiSessionAttributesEntry 5 }
+
+iscsiSsnTSIH OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The target-defined identification handle for this session."
+    REFERENCE
+        "RFC 3720, Section 10.12.6, TSIH"
+::= { iscsiSessionAttributesEntry 6 }
+
+iscsiSsnISID OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(6))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The initiator-defined portion of the iSCSI Session ID."
+    REFERENCE
+        "RFC 3720, Section 10.12.5, ISID"
+::= { iscsiSessionAttributesEntry 7 }
+
+iscsiSsnInitiatorAlias OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A UTF-8 string that gives the alias communicated by the
+
+        initiator end of the session during the login phase.
+
+        If no alias exists, the value is a zero-length string."
+    REFERENCE
+        "RFC 3720, Section 12.7, InitiatorAlias"
+::= { iscsiSessionAttributesEntry 8 }
+
+iscsiSsnTargetAlias OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A UTF-8 string that gives the alias communicated by the
+        target end of the session during the login phase.
+
+        If no alias exists, the value is a zero-length string."
+    REFERENCE
+        "RFC 3720, Section 12.6, TargetAlias"
+::= { iscsiSessionAttributesEntry 9 }
+
+iscsiSsnInitialR2T OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "If set to true, indicates that the initiator must wait
+        for an R2T before sending to the target.  If set to false,
+        the initiator may send data immediately, within limits set
+        by iscsiSsnFirstBurstLength and the expected data transfer
+        length of the request."
+    REFERENCE
+        "RFC 3720, Section 12.10, InitialR2T"
+::= { iscsiSessionAttributesEntry 10 }
+
+iscsiSsnImmediateData OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Indicates whether the initiator and target have agreed to
+        support immediate data on this session."
+    REFERENCE
+        "RFC 3720, Section 12.11, ImmediateData"
+::= { iscsiSessionAttributesEntry 11 }
+
+iscsiSsnType OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      normalSession(1),
+                      discoverySession(2)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Type of iSCSI session:
+        normalSession    - session is a normal iSCSI session
+        discoverySession - session is being used only for discovery."
+    REFERENCE
+        "RFC 3720, Section 12.21, SessionType"
+::= { iscsiSessionAttributesEntry 12 }
+
+iscsiSsnMaxOutstandingR2T OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    UNITS         "R2Ts"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The maximum number of outstanding requests-to-transmit
+        (R2Ts) per iSCSI task within this session."
+    REFERENCE
+        "RFC 3720, Section 12.17, MaxOutstandingR2T"
+::= { iscsiSessionAttributesEntry 13 }
+
+iscsiSsnFirstBurstLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The maximum length supported for unsolicited data sent
+        within this session."
+    REFERENCE
+        "RFC 3720, Section 12.14, FirstBurstLength"
+::= { iscsiSessionAttributesEntry 14 }
+
+iscsiSsnMaxBurstLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The maximum number of bytes that can be sent within
+        a single sequence of Data-In or Data-Out PDUs."
+    REFERENCE
+        "RFC 3720, Section 12.13, MaxBurstLength"
+::= { iscsiSessionAttributesEntry 15 }
+
+iscsiSsnConnectionNumber OBJECT-TYPE
+    SYNTAX        Gauge32 (1..65535)
+    UNITS         "connections"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The number of transport protocol connections that currently
+        belong to this session."
+::= { iscsiSessionAttributesEntry 16 }
+
+iscsiSsnAuthIdentity OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object contains a pointer to a row in the
+        IPS-AUTH MIB module that identifies the authentication
+        method being used on this session, as communicated
+        during the login phase."
+    REFERENCE
+        "IPS-AUTH MIB, RFC 4545"
+::= { iscsiSessionAttributesEntry 17 }
+
+ iscsiSsnDataSequenceInOrder OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "False indicates that iSCSI data PDU sequences may
+        be transferred in any order.  True indicates that
+        data PDU sequences must be transferred using
+        continuously increasing offsets, except during
+        error recovery."
+    REFERENCE
+        "RFC 3720, Section 12.19, DataSequenceInOrder"
+::= { iscsiSessionAttributesEntry 18 }
+
+iscsiSsnDataPDUInOrder OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "False indicates that iSCSI data PDUs within sequences
+        may be in any order.  True indicates that data PDUs
+        within sequences must be at continuously increasing
+        addresses, with no gaps or overlay between PDUs.
+
+        Default is true."
+    REFERENCE
+        "RFC 3720, Section 12.18, DataPDUInOrder"
+::= { iscsiSessionAttributesEntry 19 }
+
+iscsiSsnErrorRecoveryLevel OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..255)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The level of error recovery negotiated between
+        the initiator and the target.  Higher numbers
+        represent more detailed recovery schemes."
+    REFERENCE
+        "RFC 3720, Section 12.20, ErrorRecoveryLevel"
+::= { iscsiSessionAttributesEntry 20 }
+
+iscsiSsnDiscontinuityTime  OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The value of SysUpTime on the most recent occasion
+        at which any one or more of this session's counters
+        suffered a discontinuity.
+        When a session is established, and this object is
+        created, it is initialized to the current value
+        of SysUpTime."
+::= { iscsiSessionAttributesEntry 21 }
+
+-- Session Stats Table
+
+iscsiSessionStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiSessionStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of general iSCSI traffic counters for each of the
+        sessions present on the system."
+::= { iscsiSession 2 }
+
+iscsiSessionStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiSessionStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing general iSCSI traffic counters
+        for a particular session."
+    AUGMENTS { iscsiSessionAttributesEntry }
+::= { iscsiSessionStatsTable 1 }
+
+IscsiSessionStatsEntry ::= SEQUENCE {
+    iscsiSsnCmdPDUs                Counter32,
+    iscsiSsnRspPDUs                Counter32,
+    iscsiSsnTxDataOctets           Counter64,
+    iscsiSsnRxDataOctets           Counter64,
+    iscsiSsnLCTxDataOctets         Counter32,
+    iscsiSsnLCRxDataOctets         Counter32
+}
+
+iscsiSsnCmdPDUs OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "PDUs"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Command PDUs transferred on this session.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+::= { iscsiSessionStatsEntry 1 }
+
+iscsiSsnRspPDUs OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "PDUs"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of Response PDUs transferred on this session.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+::= { iscsiSessionStatsEntry 2 }
+
+iscsiSsnTxDataOctets OBJECT-TYPE
+    SYNTAX        Counter64
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of data octets that were transmitted by
+        the local iSCSI node on this session.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+::= { iscsiSessionStatsEntry 3 }
+
+iscsiSsnRxDataOctets OBJECT-TYPE
+    SYNTAX        Counter64
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of data octets that were received by
+        the local iSCSI node on this session.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+::= { iscsiSessionStatsEntry 4 }
+
+iscsiSsnLCTxDataOctets OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A Low Capacity shadow object of iscsiSsnTxDataOctets
+        for those systems that don't support Counter64.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+::= { iscsiSessionStatsEntry 5 }
+
+iscsiSsnLCRxDataOctets OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "A Low Capacity shadow object of iscsiSsnRxDataOctets
+        for those systems that don't support Counter64.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+::= { iscsiSessionStatsEntry 6 }
+
+-- Session Connection Error Stats Table
+
+iscsiSessionCxnErrorStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiSessionCxnErrorStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of error counters for each of the sessions
+        present on this system."
+::= { iscsiSession 3 }
+
+iscsiSessionCxnErrorStatsEntry OBJECT-TYPE
+    SYNTAX        IscsiSessionCxnErrorStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing error counters for
+        a particular session."
+    AUGMENTS { iscsiSessionAttributesEntry }
+::= { iscsiSessionCxnErrorStatsTable 1 }
+
+IscsiSessionCxnErrorStatsEntry ::= SEQUENCE {
+    iscsiSsnCxnDigestErrors        Counter32,
+    iscsiSsnCxnTimeoutErrors       Counter32
+}
+
+iscsiSsnCxnDigestErrors OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "PDUs"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of PDUs that were received on the session and
+        contained header or data digest errors.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 6.7, Digest Errors"
+::= { iscsiSessionCxnErrorStatsEntry 1 }
+
+iscsiSsnCxnTimeoutErrors OBJECT-TYPE
+    SYNTAX        Counter32
+    UNITS         "connections"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The count of connections within this session
+        that have been terminated due to timeout.
+        If this counter has suffered a discontinuity, the time of the
+        last discontinuity is indicated in iscsiSsnDiscontinuityTime."
+    REFERENCE
+        "RFC 3720, Section 6.4, Connection Timeout Management"
+::= { iscsiSessionCxnErrorStatsEntry 2 }
+
+--**********************************************************************
+
+iscsiConnection OBJECT IDENTIFIER ::= { iscsiObjects 11 }
+
+-- Connection Attributes Table
+
+iscsiConnectionAttributesTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF IscsiConnectionAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A list of connections belonging to each iSCSI instance
+        present on the system."
+::= { iscsiConnection 1 }
+
+iscsiConnectionAttributesEntry OBJECT-TYPE
+    SYNTAX        IscsiConnectionAttributesEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry (row) containing management information applicable
+        to a particular connection."
+    INDEX  { iscsiInstIndex, iscsiSsnNodeIndex, iscsiSsnIndex,
+             iscsiCxnIndex }
+::= { iscsiConnectionAttributesTable 1 }
+
+IscsiConnectionAttributesEntry ::= SEQUENCE {
+    iscsiCxnIndex                  Unsigned32,
+    iscsiCxnCid                    Unsigned32,
+    iscsiCxnState                  INTEGER,
+    iscsiCxnAddrType               InetAddressType,
+    iscsiCxnLocalAddr              InetAddress,
+    iscsiCxnProtocol               IscsiTransportProtocol,
+    iscsiCxnLocalPort              InetPortNumber,
+    iscsiCxnRemoteAddr             InetAddress,
+    iscsiCxnRemotePort             InetPortNumber,
+    iscsiCxnMaxRecvDataSegLength   Unsigned32,
+    iscsiCxnMaxXmitDataSegLength   Unsigned32,
+    iscsiCxnHeaderIntegrity        IscsiDigestMethod,
+    iscsiCxnDataIntegrity          IscsiDigestMethod,
+    iscsiCxnRecvMarker             TruthValue,
+    iscsiCxnSendMarker             TruthValue,
+    iscsiCxnVersionActive          Unsigned32
+}
+
+iscsiCxnIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An arbitrary integer used to uniquely identify a
+        particular connection of a particular session within
+        an iSCSI instance present on the local system.  An
+        agent should attempt to not reuse index values unless
+        a reboot has occurred.  iSCSI connections are destroyed
+        during a reboot; rows in this table are not persistent
+        across reboots."
+::= { iscsiConnectionAttributesEntry 1 }
+
+iscsiCxnCid OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..65535)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The iSCSI Connection ID for this connection."
+::= { iscsiConnectionAttributesEntry 2 }
+
+iscsiCxnState OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      login(1),
+                      full(2),
+                      logout(3)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The current state of this connection, from an iSCSI negotiation
+        point of view.  Here are the states:
+
+        login  - The transport protocol connection has been established,
+                 but a valid iSCSI login response with the final bit set
+                 has not been sent or received.
+        full   - A valid iSCSI login response with the final bit set
+                 has been sent or received.
+        logout - A valid iSCSI logout command has been sent or
+                 received, but the transport protocol connection has
+                 not yet been closed."
+::= { iscsiConnectionAttributesEntry 3 }
+
+iscsiCxnAddrType OBJECT-TYPE
+    SYNTAX        InetAddressType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of Internet Network Addresses contained in the
+        corresponding instances of iscsiCxnLocalAddr and
+        iscsiCxnRemoteAddr.
+        The value 'dns' is not allowed."
+::= { iscsiConnectionAttributesEntry 4 }
+
+iscsiCxnLocalAddr OBJECT-TYPE
+    SYNTAX        InetAddress
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The local Internet Network Address, of the type specified
+        by iscsiCxnAddrType, used by this connection."
+::= { iscsiConnectionAttributesEntry 5 }
+
+iscsiCxnProtocol OBJECT-TYPE
+    SYNTAX        IscsiTransportProtocol
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The transport protocol over which this connection is
+        running."
+::= { iscsiConnectionAttributesEntry 6 }
+
+iscsiCxnLocalPort OBJECT-TYPE
+    SYNTAX        InetPortNumber
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The local transport protocol port used by this connection.
+        This object cannot have the value zero, since it represents
+        an established connection."
+::= { iscsiConnectionAttributesEntry 7 }
+
+iscsiCxnRemoteAddr OBJECT-TYPE
+    SYNTAX        InetAddress
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The remote Internet Network Address, of the type specified
+        by iscsiCxnAddrType, used by this connection."
+::= { iscsiConnectionAttributesEntry 8 }
+
+iscsiCxnRemotePort OBJECT-TYPE
+    SYNTAX        InetPortNumber
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The remote transport protocol port used by this connection.
+        This object cannot have the value zero, since it represents
+        an established connection."
+::= { iscsiConnectionAttributesEntry 9 }
+
+iscsiCxnMaxRecvDataSegLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The maximum data payload size supported for command
+        or data PDUs able to be received on this connection."
+    REFERENCE
+        "RFC 3720, Section 12.12, MaxRecvDataSegmentLength"
+::= { iscsiConnectionAttributesEntry 10 }
+
+iscsiCxnMaxXmitDataSegLength OBJECT-TYPE
+    SYNTAX        Unsigned32 (512..16777215)
+    UNITS         "bytes"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The maximum data payload size supported for command
+        or data PDUs to be sent on this connection."
+    REFERENCE
+        "RFC 3720, Section 12.12, MaxRecvDataSegmentLength"
+::= { iscsiConnectionAttributesEntry 11 }
+
+iscsiCxnHeaderIntegrity OBJECT-TYPE
+    SYNTAX        IscsiDigestMethod
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object identifies the iSCSI header
+        digest scheme in use within this connection."
+::= { iscsiConnectionAttributesEntry 12 }
+
+iscsiCxnDataIntegrity OBJECT-TYPE
+    SYNTAX        IscsiDigestMethod
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object identifies the iSCSI data
+        digest scheme in use within this connection."
+::= { iscsiConnectionAttributesEntry 13 }
+
+iscsiCxnRecvMarker OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object indicates whether or not this connection
+        is receiving markers in its incoming data stream."
+    REFERENCE
+        "RFC 3720, Appendix A."
+::= { iscsiConnectionAttributesEntry 14 }
+
+iscsiCxnSendMarker OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "This object indicates whether or not this connection
+        is inserting markers in its outgoing data stream."
+    REFERENCE
+        "RFC 3720, Appendix A."
+::= { iscsiConnectionAttributesEntry 15 }
+
+iscsiCxnVersionActive OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..255)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Active version number of the iSCSI specification negotiated
+        on this connection."
+    REFERENCE
+        "RFC 3720, Section 10.12, Login Request"
+::= { iscsiConnectionAttributesEntry 16 }
+
+--**********************************************************************
+-- Notifications
+
+iscsiTgtLoginFailure NOTIFICATION-TYPE
+    OBJECTS {
+        iscsiTgtLoginFailures,
+        iscsiTgtLastFailureType,
+        iscsiTgtLastIntrFailureName,
+        iscsiTgtLastIntrFailureAddrType,
+        iscsiTgtLastIntrFailureAddr
+    }
+    STATUS current
+    DESCRIPTION
+        "Sent when a login is failed by a target.
+
+        To avoid sending an excessive number of notifications due
+        to multiple errors counted, an SNMP agent implementing this
+        notification SHOULD NOT send more than 3 notifications of
+        this type in any 10-second time period."
+::= { iscsiNotifications 1 }
+
+iscsiIntrLoginFailure NOTIFICATION-TYPE
+    OBJECTS {
+        iscsiIntrLoginFailures,
+        iscsiIntrLastFailureType,
+        iscsiIntrLastTgtFailureName,
+        iscsiIntrLastTgtFailureAddrType,
+        iscsiIntrLastTgtFailureAddr
+    }
+    STATUS current
+    DESCRIPTION
+        "Sent when a login is failed by an initiator.
+
+        To avoid sending an excessive number of notifications due
+        to multiple errors counted, an SNMP agent implementing this
+        notification SHOULD NOT send more than 3 notifications of
+        this type in any 10-second time period."
+::= { iscsiNotifications 2 }
+
+iscsiInstSessionFailure NOTIFICATION-TYPE
+    OBJECTS {
+        iscsiInstSsnFailures,
+        iscsiInstLastSsnFailureType,
+        iscsiInstLastSsnRmtNodeName
+    }
+    STATUS current
+    DESCRIPTION
+        "Sent when an active session is failed by either the initiator
+        or the target.
+
+        To avoid sending an excessive number of notifications due
+        to multiple errors counted, an SNMP agent implementing this
+        notification SHOULD NOT send more than 3 notifications of
+        this type in any 10-second time period."
+::= { iscsiNotifications 3 }
+
+--**********************************************************************
+
+-- Conformance Statements
+
+iscsiCompliances OBJECT IDENTIFIER ::= { iscsiConformance 1 }
+iscsiGroups      OBJECT IDENTIFIER ::= { iscsiConformance 2 }
+
+iscsiInstanceAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiInstDescr,
+        iscsiInstVersionMin,
+        iscsiInstVersionMax,
+        iscsiInstVendorID,
+        iscsiInstVendorVersion,
+        iscsiInstPortalNumber,
+        iscsiInstNodeNumber,
+        iscsiInstSessionNumber,
+        iscsiInstSsnFailures,
+        iscsiInstLastSsnFailureType,
+        iscsiInstLastSsnRmtNodeName,
+        iscsiInstDiscontinuityTime
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about iSCSI
+        instances."
+::= { iscsiGroups 1 }
+
+iscsiInstanceSsnErrorStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiInstSsnDigestErrors,
+        iscsiInstSsnCxnTimeoutErrors,
+        iscsiInstSsnFormatErrors
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        errors that have caused a session failure for an
+        iSCSI instance."
+::= { iscsiGroups 2 }
+
+iscsiPortalAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiPortalRowStatus,
+        iscsiPortalStorageType,
+        iscsiPortalRoles,
+        iscsiPortalAddrType,
+        iscsiPortalAddr,
+        iscsiPortalProtocol,
+        iscsiPortalMaxRecvDataSegLength,
+        iscsiPortalPrimaryHdrDigest,
+        iscsiPortalPrimaryDataDigest,
+        iscsiPortalSecondaryHdrDigest,
+        iscsiPortalSecondaryDataDigest,
+        iscsiPortalRecvMarker
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        the transport protocol endpoints of the local targets."
+::= { iscsiGroups 3 }
+
+iscsiTgtPortalAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiTgtPortalPort,
+        iscsiTgtPortalTag
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        the transport protocol endpoints of the local targets."
+::= { iscsiGroups 4 }
+
+iscsiIntrPortalAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiIntrPortalTag
+    }
+    STATUS current
+    DESCRIPTION
+        "An object providing information about
+        the portal tags used by the local initiators."
+::= { iscsiGroups 5 }
+
+iscsiNodeAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiNodeName,
+        iscsiNodeAlias,
+        iscsiNodeRoles,
+        iscsiNodeTransportType,
+        iscsiNodeInitialR2T,
+        iscsiNodeImmediateData,
+        iscsiNodeMaxOutstandingR2T,
+        iscsiNodeFirstBurstLength,
+        iscsiNodeMaxBurstLength,
+        iscsiNodeMaxConnections,
+        iscsiNodeDataSequenceInOrder,
+        iscsiNodeDataPDUInOrder,
+        iscsiNodeDefaultTime2Wait,
+        iscsiNodeDefaultTime2Retain,
+        iscsiNodeErrorRecoveryLevel,
+        iscsiNodeDiscontinuityTime,
+        iscsiNodeStorageType
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        local targets."
+::= { iscsiGroups 6 }
+
+iscsiTargetAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiTgtLoginFailures,
+        iscsiTgtLastFailureTime,
+        iscsiTgtLastFailureType,
+        iscsiTgtLastIntrFailureName,
+        iscsiTgtLastIntrFailureAddrType,
+        iscsiTgtLastIntrFailureAddr
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        local targets."
+::= { iscsiGroups 7 }
+
+iscsiTargetLoginStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiTgtLoginAccepts,
+        iscsiTgtLoginOtherFails,
+        iscsiTgtLoginRedirects,
+        iscsiTgtLoginAuthorizeFails,
+        iscsiTgtLoginAuthenticateFails,
+        iscsiTgtLoginNegotiateFails
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        login attempts by remote initiators to local targets."
+::= { iscsiGroups 8 }
+
+iscsiTargetLogoutStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiTgtLogoutNormals,
+        iscsiTgtLogoutOthers
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        logout events between remote initiators and local targets."
+::= { iscsiGroups 9 }
+
+iscsiTargetAuthGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiTgtAuthRowStatus,
+        iscsiTgtAuthStorageType,
+        iscsiTgtAuthIdentity
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        remote initiators that are authorized to connect to local
+        targets."
+::= { iscsiGroups 10 }
+
+iscsiInitiatorAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiIntrLoginFailures,
+        iscsiIntrLastFailureTime,
+        iscsiIntrLastFailureType,
+        iscsiIntrLastTgtFailureName,
+        iscsiIntrLastTgtFailureAddrType,
+        iscsiIntrLastTgtFailureAddr
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about
+        all local initiators."
+::= { iscsiGroups 11 }
+
+iscsiInitiatorLoginStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiIntrLoginAcceptRsps,
+        iscsiIntrLoginOtherFailRsps,
+        iscsiIntrLoginRedirectRsps,
+        iscsiIntrLoginAuthFailRsps,
+        iscsiIntrLoginAuthenticateFails,
+        iscsiIntrLoginNegotiateFails
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        login attempts by local initiators to remote targets."
+::= { iscsiGroups 12 }
+
+iscsiInitiatorLogoutStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiIntrLogoutNormals,
+        iscsiIntrLogoutOthers
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        logout events between local initiators and remote targets."
+::= { iscsiGroups 13 }
+
+iscsiInitiatorAuthGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiIntrAuthRowStatus,
+        iscsiIntrAuthStorageType,
+        iscsiIntrAuthIdentity
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        remote targets that are initiators of the local system
+        that they are authorized to access."
+::= { iscsiGroups 14 }
+
+iscsiSessionAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiSsnDirection,
+        iscsiSsnInitiatorName,
+        iscsiSsnTargetName,
+        iscsiSsnTSIH,
+        iscsiSsnISID,
+        iscsiSsnInitiatorAlias,
+        iscsiSsnTargetAlias,
+        iscsiSsnInitialR2T,
+        iscsiSsnImmediateData,
+        iscsiSsnType,
+        iscsiSsnMaxOutstandingR2T,
+        iscsiSsnFirstBurstLength,
+        iscsiSsnMaxBurstLength,
+        iscsiSsnConnectionNumber,
+        iscsiSsnAuthIdentity,
+        iscsiSsnDataSequenceInOrder,
+        iscsiSsnDataPDUInOrder,
+        iscsiSsnErrorRecoveryLevel,
+        iscsiSsnDiscontinuityTime
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information applicable to
+        all sessions."
+::= { iscsiGroups 15 }
+
+iscsiSessionPDUStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiSsnCmdPDUs,
+        iscsiSsnRspPDUs
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about PDU
+        traffic for each session."
+::= { iscsiGroups 16 }
+
+iscsiSessionOctetStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiSsnTxDataOctets,
+        iscsiSsnRxDataOctets
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about octet
+        traffic for each session using a Counter64 data type."
+::= { iscsiGroups 17 }
+
+iscsiSessionLCOctetStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiSsnLCTxDataOctets,
+        iscsiSsnLCRxDataOctets
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about octet
+        traffic for each session using a Counter32 data type."
+::= { iscsiGroups 18 }
+
+iscsiSessionCxnErrorStatsGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiSsnCxnDigestErrors,
+        iscsiSsnCxnTimeoutErrors
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about connection
+        errors for all sessions."
+::= { iscsiGroups 19 }
+
+iscsiConnectionAttributesGroup OBJECT-GROUP
+    OBJECTS {
+        iscsiCxnCid,
+        iscsiCxnState,
+        iscsiCxnProtocol,
+        iscsiCxnAddrType,
+        iscsiCxnLocalAddr,
+        iscsiCxnLocalPort,
+        iscsiCxnRemoteAddr,
+        iscsiCxnRemotePort,
+        iscsiCxnMaxRecvDataSegLength,
+        iscsiCxnMaxXmitDataSegLength,
+        iscsiCxnHeaderIntegrity,
+        iscsiCxnDataIntegrity,
+        iscsiCxnRecvMarker,
+        iscsiCxnSendMarker,
+        iscsiCxnVersionActive
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        connections used by all sessions."
+::= { iscsiGroups 20 }
+
+iscsiTgtLgnNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        iscsiTgtLoginFailure
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of notifications that indicate a login
+        failure from a remote initiator to a local target."
+::= { iscsiGroups 21 }
+
+iscsiIntrLgnNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        iscsiIntrLoginFailure
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of notifications that indicate a login
+        failure from a local initiator to a remote target."
+::= { iscsiGroups 22 }
+
+iscsiSsnFlrNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        iscsiInstSessionFailure
+    }
+    STATUS current
+    DESCRIPTION
+        "A collection of notifications that indicate session
+        failures occurring after login."
+::= { iscsiGroups 23 }
+
+--**********************************************************************
+
+iscsiComplianceV1 MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "Initial version of compliance statement based on
+        initial version of this MIB module.
+
+        If an implementation can be both a target and an
+        initiator, all groups are mandatory."
+    MODULE       -- this module
+    MANDATORY-GROUPS {
+
+        iscsiInstanceAttributesGroup,
+        iscsiInstanceSsnErrorStatsGroup,
+        iscsiPortalAttributesGroup,
+        iscsiNodeAttributesGroup,
+        iscsiSessionAttributesGroup,
+        iscsiSessionPDUStatsGroup,
+        iscsiSessionCxnErrorStatsGroup,
+        iscsiConnectionAttributesGroup,
+        iscsiSsnFlrNotificationsGroup
+    }
+
+    -- Conditionally mandatory groups depending on the ability
+    -- to support Counter64 data types and/or to provide counter
+    -- information to SNMPv1 applications.
+
+    GROUP iscsiSessionOctetStatsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that can support Counter64 data types."
+
+    GROUP iscsiSessionLCOctetStatsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that provide information to SNMPv1-only applications;
+        this includes agents that cannot support Counter64
+        data types."
+
+    -- Conditionally mandatory groups to be included with
+    -- the mandatory groups when the implementation has
+    -- iSCSI target facilities.
+
+    GROUP iscsiTgtPortalAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI target facilities."
+
+    OBJECT iscsiPortalMaxRecvDataSegLength
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT iscsiNodeStorageType
+    MIN-ACCESS read-only
+    DESCRIPTION
+        "Write access is not required; an implementation may
+         choose to allow this object to be set to 'volatile'
+         or 'nonVolatile'."
+
+    GROUP iscsiTargetAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI target facilities."
+
+    GROUP iscsiTargetLoginStatsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI target facilities."
+
+    GROUP iscsiTargetLogoutStatsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI target facilities."
+
+    GROUP iscsiTgtLgnNotificationsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI target facilities."
+
+    GROUP iscsiTargetAuthGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI target facilities."
+
+    -- Conditionally mandatory groups to be included with
+    -- the mandatory groups when the implementation has
+    -- iSCSI initiator facilities.
+
+    GROUP iscsiIntrPortalAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI initiator facilities."
+
+    GROUP iscsiInitiatorAttributesGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI initiator facilities."
+
+    GROUP iscsiInitiatorLoginStatsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI initiator facilities."
+
+    GROUP iscsiInitiatorLogoutStatsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI initiator facilities."
+
+    GROUP iscsiIntrLgnNotificationsGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI initiator facilities."
+
+    GROUP iscsiInitiatorAuthGroup
+    DESCRIPTION
+        "This group is mandatory for all iSCSI implementations
+        that have iSCSI initiator facilities."
+
+    OBJECT       iscsiNodeErrorRecoveryLevel
+    SYNTAX       Unsigned32 (0..2)
+    DESCRIPTION
+        "Only values 0-2 are defined at present."
+::= { iscsiCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/ISDN-MIB.mib b/snmp_builder/mibs/ISDN-MIB.mib
new file mode 100644
index 0000000..c68bf54
--- /dev/null
+++ b/snmp_builder/mibs/ISDN-MIB.mib
@@ -0,0 +1,1260 @@
+ISDN-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        NOTIFICATION-TYPE,
+        OBJECT-TYPE,
+        Counter32,
+        Gauge32,
+        Integer32
+                FROM SNMPv2-SMI
+        DisplayString,
+        TruthValue,
+        TimeStamp,
+        RowStatus,
+        TestAndIncr,
+        TEXTUAL-CONVENTION
+                 FROM SNMPv2-TC
+        MODULE-COMPLIANCE,
+        OBJECT-GROUP,
+        NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+        ifIndex,
+        InterfaceIndex
+                FROM IF-MIB
+        IANAifType
+                FROM IANAifType-MIB
+        transmission
+                FROM RFC1213-MIB;
+
+isdnMib MODULE-IDENTITY
+        LAST-UPDATED    "9609231642Z" -- Sep 23, 1996
+        ORGANIZATION    "IETF ISDN MIB Working Group"
+        CONTACT-INFO
+            "        Guenter Roeck
+             Postal: cisco Systems
+                     170 West Tasman Drive
+                     San Jose, CA 95134
+                     U.S.A.
+             Phone:  +1 408 527 3143
+             E-mail: groeck@cisco.com"
+        DESCRIPTION
+            "The MIB module to describe the
+             management of ISDN interfaces."
+        ::= { transmission 20 }
+
+-- The ISDN hardware interface (BRI or PRI) is represented
+
+-- by a media specific ifEntry.
+--
+-- For basic rate lines, the media specifics for the physical interface
+-- is defined in the physical interface group of the ISDN MIB.
+-- The ifType for physical basic rate interfaces is isdns(75)
+-- or isdnu(76), whichever is appropriate.
+--
+-- For primary rate, the media specifics are defined in the Trunk
+-- MIB and the ifType has a value of ds1(18).
+
+-- Each signaling channel is represented by an entry
+-- in the isdnSignalingTable.
+-- The signaling channel has an ifType value of isdn(63).
+-- Each B channel is also represented as an entry
+-- in the ifTable. The B channels have an ifType value
+-- of ds0(81).
+-- This model is used while defining objects and tables
+-- for management.
+-- The ISDN MIB allows sub-layers. For example, the data transfer
+-- over a B channel may take place with PPP encapsulation. While the
+-- ISDN MIB describes the D and B channels, a media specific MIB
+-- for PPP can be used on a layered basis. This is as per
+-- the interfaces MIB.
+
+-- Textual conventions
+
+IsdnSignalingProtocol ::= TEXTUAL-CONVENTION
+        STATUS      current
+        DESCRIPTION
+            "This data type is used as the syntax of the
+             isdnSignalingProtocol object in the
+             definition of ISDN-MIB's isdnSignalingTable.
+
+             The definition of this textual convention with the
+             addition of newly assigned values is published
+             periodically by the IANA, in either the Assigned
+             Numbers RFC, or some derivative of it specific to
+             Internet Network Management number assignments.  (The
+             latest arrangements can be obtained by contacting the
+             IANA.)
+
+             Requests for new values should be made to IANA via
+             email (iana@iana.org)."
+        SYNTAX      INTEGER {
+             other(1),          -- none of the following
+             dss1(2),           -- ITU DSS1 (formerly CCITT) Q.931
+             etsi(3),           -- Europe / ETSI ETS300-102
+                                -- plus supplementary services
+
+                                -- (ETSI 300-xxx)
+                                -- note that NET3, NET5 define
+                                -- test procedures for ETS300-102
+                                -- and have been replaced by
+                                -- I-CTR 3 and I-CTR 4.
+             dass2(4),          -- U.K.   / DASS2 (PRI)
+             ess4(5),           -- U.S.A. / AT&T 4ESS
+             ess5(6),           -- U.S.A. / AT&T 5ESS
+             dms100(7),         -- U.S.A. / Northern Telecom DMS100
+             dms250(8),         -- U.S.A. / Northern Telecom DMS250
+             ni1(9),            -- U.S.A. / National ISDN 1 (BRI)
+             ni2(10),           -- U.S.A. / National ISDN 2 (BRI, PRI)
+             ni3(11),           -- U.S.A. / next one
+             vn2(12),           -- France / VN2
+             vn3(13),           -- France / VN3
+             vn4(14),           -- France / VN4 (ETSI with changes)
+             vn6(15),           -- France / VN6 (ETSI with changes)
+                                -- delta document CSE P 10-21 A
+                                -- test document  CSE P 10-20 A
+             kdd(16),           -- Japan  / KDD
+             ins64(17),         -- Japan  / NTT INS64
+             ins1500(18),       -- Japan  / NTT INS1500
+             itr6(19),          -- Germany/ 1TR6 (BRI, PRI)
+             cornet(20),        -- Germany/ Siemens HiCom CORNET
+             ts013(21),         -- Australia / TS013
+                                -- (formerly TPH 1962, BRI)
+             ts014(22),         -- Australia / TS014
+                                -- (formerly TPH 1856, PRI)
+             qsig(23),          -- Q.SIG
+             swissnet2(24),     -- SwissNet-2
+             swissnet3(25)      -- SwissNet-3
+        }
+
+-- Isdn Mib objects definitions
+
+isdnMibObjects OBJECT IDENTIFIER ::= { isdnMib 1 }
+
+-- ISDN physical interface group
+
+-- This group describes physical basic rate interfaces.
+
+isdnBasicRateGroup      OBJECT IDENTIFIER ::= { isdnMibObjects 1 }
+
+isdnBasicRateTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnBasicRateEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Table containing configuration and operational
+             parameters for all physical Basic Rate
+             interfaces on this managed device."
+        ::= { isdnBasicRateGroup 1 }
+
+isdnBasicRateEntry OBJECT-TYPE
+        SYNTAX      IsdnBasicRateEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the ISDN Basic Rate Table."
+        INDEX { ifIndex }
+        ::= { isdnBasicRateTable 1 }
+
+IsdnBasicRateEntry ::= SEQUENCE {
+            isdnBasicRateIfType         INTEGER,
+            isdnBasicRateLineTopology   INTEGER,
+            isdnBasicRateIfMode         INTEGER,
+            isdnBasicRateSignalMode     INTEGER
+        }
+
+isdnBasicRateIfType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            isdns(75),
+            isdnu(76)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The physical interface type. For 'S/T' interfaces,
+             also called 'Four-wire Basic Access Interface',
+             the value of this object is isdns(75).
+             For 'U' interfaces, also called 'Two-wire Basic
+             Access Interface', the value of this object is
+             isdnu(76)."
+        ::= { isdnBasicRateEntry 1 }
+
+isdnBasicRateLineTopology OBJECT-TYPE
+        SYNTAX      INTEGER {
+            pointToPoint(1),
+            pointToMultipoint(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The line topology to be used for this interface.
+             Note that setting isdnBasicRateIfType to isdns(75)
+             does not necessarily mean a line topology of
+
+             point-to-multipoint."
+        ::= { isdnBasicRateEntry 2 }
+
+isdnBasicRateIfMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+            te(1),
+            nt(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The physical interface mode. For TE mode, the value
+             of this object is te(1). For NT mode, the value
+             of this object is nt(2)."
+        ::= { isdnBasicRateEntry 3 }
+
+isdnBasicRateSignalMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+            active(1),
+            inactive(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The signaling channel operational mode for this interface.
+             If active(1) there is a signaling channel on this
+             interface. If inactive(2) a signaling channel is
+             not available."
+        ::= { isdnBasicRateEntry 4 }
+
+-- The B channel (bearer channel) group
+
+-- Note that disconnects can explicitely be handled using the
+-- ifStack table. If a connection is to be disconnected,
+-- the according ifStack entry has to be removed.
+-- More specifically, the ifStackTable entry which binds the high-layer
+-- ifTable entry (and related dialCtlNbrCfgTable entry) to the
+-- B channel ifTable entry (and related isdnBearerTable entry)
+-- during an active call has to be removed.
+
+isdnBearerGroup OBJECT IDENTIFIER ::= { isdnMibObjects 2 }
+
+isdnBearerTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnBearerEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This table defines port specific operational, statistics
+
+             and active call data for ISDN B channels. Each entry
+             in this table describes one B (bearer) channel."
+        ::= { isdnBearerGroup 1 }
+
+isdnBearerEntry OBJECT-TYPE
+        SYNTAX      IsdnBearerEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Operational and statistics information relating to
+             one port. A port is a single B channel."
+        INDEX { ifIndex }
+        ::= { isdnBearerTable 1 }
+
+IsdnBearerEntry ::=
+        SEQUENCE {
+            isdnBearerChannelType           INTEGER,
+            isdnBearerOperStatus            INTEGER,
+            isdnBearerChannelNumber         INTEGER,
+            isdnBearerPeerAddress           DisplayString,
+            isdnBearerPeerSubAddress        DisplayString,
+            isdnBearerCallOrigin            INTEGER,
+            isdnBearerInfoType              INTEGER,
+            isdnBearerMultirate             TruthValue,
+            isdnBearerCallSetupTime         TimeStamp,
+            isdnBearerCallConnectTime       TimeStamp,
+            isdnBearerChargedUnits          Gauge32
+        }
+
+isdnBearerChannelType           OBJECT-TYPE
+        SYNTAX INTEGER {
+            dialup(1),
+            leased(2)
+        }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The B channel type. If the B channel is connected
+             to a dialup line, this object has a value of
+             dialup(1). In this case, it is controlled by
+             an associated signaling channel. If the B channel
+             is connected to a leased line, this object has
+             a value of leased(2). For leased line B channels, there
+             is no signaling channel control available."
+        ::= { isdnBearerEntry 1 }
+
+isdnBearerOperStatus            OBJECT-TYPE
+        SYNTAX INTEGER {
+
+            idle(1),
+            connecting(2),
+            connected(3),
+            active(4)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current call control state for this port.
+             idle(1):       The B channel is idle.
+                            No call or call attempt is going on.
+             connecting(2): A connection attempt (outgoing call)
+                            is being made on this interface.
+             connected(3):  An incoming call is in the process
+                            of validation.
+             active(4):     A call is active on this interface."
+        ::= { isdnBearerEntry 2 }
+
+isdnBearerChannelNumber         OBJECT-TYPE
+        SYNTAX INTEGER (1..30)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The identifier being used by a signaling protocol
+             to identify this B channel, also referred to as
+             B channel number. If the Agent also supports the DS0 MIB,
+             the values of isdnBearerChannelNumber and dsx0Ds0Number
+             must be identical for a given B channel."
+        ::= { isdnBearerEntry 3 }
+
+isdnBearerPeerAddress           OBJECT-TYPE
+        SYNTAX   DisplayString
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+            "The ISDN address the current or last call is or was
+             connected to.
+
+             In some cases, the format of this information can not
+             be predicted, since it largely depends on the type
+             of switch or PBX the device is connected to. Therefore,
+             the detailed format of this information is not
+             specified and is implementation dependent.
+
+             If possible, the agent should supply this information
+             using the E.164 format. In this case, the number must
+             start with '+'. Otherwise, IA5 number digits must be used.
+
+             If the peer ISDN address is not available,
+             this object has a length of zero."
+        REFERENCE
+            "ITU-T E.164, Q.931 chapter 4.5.10"
+        ::= { isdnBearerEntry 4 }
+
+isdnBearerPeerSubAddress        OBJECT-TYPE
+        SYNTAX   DisplayString
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+            "The ISDN subaddress the current or last call is or was
+             connected to.
+
+             The subaddress is an user supplied string of up to 20
+             IA5 characters and is transmitted transparently through
+             the network.
+
+             If the peer subaddress is not available, this object
+             has a length of zero."
+        REFERENCE
+             "ITU-T I.330, Q.931 chapter 4.5.11"
+        ::= { isdnBearerEntry 5 }
+
+isdnBearerCallOrigin            OBJECT-TYPE
+          SYNTAX   INTEGER {
+            unknown(1),
+            originate(2),
+            answer(3),
+            callback(4)
+        }
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+            "The call origin for the current or last call. If since
+             system startup there was no call on this interface,
+             this object has a value of unknown(1)."
+        ::= { isdnBearerEntry 6 }
+
+isdnBearerInfoType              OBJECT-TYPE
+        SYNTAX      INTEGER {
+            unknown(1),
+            speech(2),
+            unrestrictedDigital(3),       -- as defined in Q.931
+            unrestrictedDigital56(4),     -- with 56k rate adaption
+            restrictedDigital(5),
+            audio31(6),                   -- 3.1 kHz audio
+            audio7(7),                    -- 7 kHz audio
+
+            video(8),
+            packetSwitched(9)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The Information Transfer Capability for the current
+             or last call.
+
+             speech(2) refers to a non-data connection, whereas
+             audio31(6) and audio7(7) refer to data mode connections.
+
+             Note that Q.931, chapter 4.5.5, originally defined
+             audio7(7) as '7 kHz audio' and now defines it as
+             'Unrestricted digital information with tones/
+             announcements'.
+
+             If since system startup there has been no call on this
+             interface, this object has a value of unknown(1)."
+        REFERENCE
+            "Q.931 [8], chapter 4.5.5, octet 3 of bearer capability
+             information element, combined with the User Rate
+             (as defined in octets 5 and 5a to 5d), if rate adaption
+             is being used."
+        ::= { isdnBearerEntry 7 }
+
+isdnBearerMultirate             OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This flag indicates if the current or last call used
+             multirate. The actual information transfer rate,
+             in detail specified in octet 4.1 (rate multiplier),
+             is the sum of all B channel ifSpeed values for
+             the hyperchannel.
+
+             If since system startup there was no call on this
+             interface, this object has a value of false(2)."
+        REFERENCE
+            "Q.931 [8], chapter 4.5.5."
+        ::= { isdnBearerEntry 8 }
+
+isdnBearerCallSetupTime         OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the ISDN setup message for
+             the current or last call was sent or received. If since
+             system startup there has been no call on this interface,
+             this object has a value of zero."
+        ::= { isdnBearerEntry 9 }
+
+isdnBearerCallConnectTime       OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The value of sysUpTime when the ISDN connect message for
+             the current or last call was sent or received. If since
+             system startup there has been no call on this interface,
+             this object has a value of zero."
+        ::= { isdnBearerEntry 10 }
+
+isdnBearerChargedUnits          OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of charged units for the current or last
+             connection. For incoming calls or if charging information
+             is not supplied by the switch, the value of this object
+             is zero."
+        ::= { isdnBearerEntry 11 }
+
+-- ISDN signaling group
+
+isdnSignalingGroup OBJECT IDENTIFIER ::= { isdnMibObjects 3 }
+
+-- signaling channel configuration table
+-- There is one entry in this table for each Terminal Endpoint
+-- (link layer connection to the switch).
+-- Usually, there is one endpoint per D channel. In some
+-- cases, however, there can be multiple endpoints.
+-- Thus, entries in this table can be created and deleted.
+-- This also means the creation of an associated ifEntry.
+--
+-- D channel backup and NFAS trunks are handled using the
+-- ifStack table.
+-- In case of D channel backup, there are multiple
+-- Data Link Layer (LAPD) interfaces. Only one interface is
+-- active; all others are dormant(5).
+-- In case of NFAS trunks, one lower interface is the
+-- LAPD interface, while the other lower interfaces are physical
+-- interfaces.
+
+-- If directory number and calling address differ from each other
+-- or multiple directory numbers are being used,
+-- the isdnDirectoryTable has to be used to enter such
+-- directory numbers.
+
+isdnSignalingGetIndex OBJECT-TYPE
+        SYNTAX      TestAndIncr
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The recommended procedure for selecting a new index for
+             isdnSignalingTable row creation is to GET the value of
+             this object, and then to SET the object with the same
+             value. If the SET operation succeeds, the manager can use
+             this value as an index to create a new row in this table."
+        REFERENCE
+            "RFC1903, TestAndIncr textual convention."
+        ::= { isdnSignalingGroup 1 }
+
+isdnSignalingTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnSignalingEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "ISDN signaling table containing configuration and
+             operational parameters for all ISDN signaling
+             channels on this managed device."
+        ::= { isdnSignalingGroup 2 }
+
+isdnSignalingEntry OBJECT-TYPE
+        SYNTAX      IsdnSignalingEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the ISDN Signaling Table. To create a new
+             entry, only isdnSignalingProtocol needs to be specified
+             before isdnSignalingStatus can become active(1)."
+        INDEX { isdnSignalingIndex }
+        ::= { isdnSignalingTable 1 }
+
+IsdnSignalingEntry ::= SEQUENCE {
+            isdnSignalingIndex          INTEGER,
+            isdnSignalingIfIndex        InterfaceIndex,
+            isdnSignalingProtocol       IsdnSignalingProtocol,
+            isdnSignalingCallingAddress DisplayString,
+            isdnSignalingSubAddress     DisplayString,
+            isdnSignalingBchannelCount  Integer32,
+            isdnSignalingInfoTrapEnable INTEGER,
+            isdnSignalingStatus         RowStatus
+        }
+
+isdnSignalingIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The index value which uniquely identifies an entry
+             in the isdnSignalingTable."
+        ::= { isdnSignalingEntry 1 }
+
+isdnSignalingIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The ifIndex value of the interface associated with this
+             signaling channel."
+        ::= { isdnSignalingEntry 2 }
+
+isdnSignalingProtocol OBJECT-TYPE
+        SYNTAX      IsdnSignalingProtocol
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The particular protocol type supported by the
+             switch providing access to the ISDN network
+             to which this signaling channel is connected."
+        ::= { isdnSignalingEntry 3 }
+
+isdnSignalingCallingAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The ISDN Address to be assigned to this signaling
+             channel. More specifically, this is the 'Calling Address
+             information element' as being passed to the switch
+             in outgoing call setup messages.
+
+             It can be an EAZ (1TR6), a calling number (DSS1, ETSI)
+             or any other number necessary to identify a signaling
+             interface. If there is no such number defined or required,
+             this is a zero length string. It is represented in
+             DisplayString form.
+
+             Incoming calls can also be identified by this number.
+
+             If the Directory Number, i.e. the Called Number in
+             incoming calls, is different to this number, the
+             isdnDirectoryTable has to be used to specify all
+             possible Directory Numbers.
+
+             The format of this information largely depends on the type
+             of switch or PBX the device is connected to. Therefore,
+             the detailed format of this information is not
+             specified and is implementation dependent.
+
+             If possible, the agent should implement this information
+             using the E.164 number format. In this case, the number
+             must start with '+'. Otherwise, IA5 number digits must
+             be used."
+        REFERENCE
+            "ITU-T E.164, Q.931 chapter 4.5.10"
+        DEFVAL { "" }
+        ::= { isdnSignalingEntry 4 }
+
+isdnSignalingSubAddress OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Supplementary information to the ISDN address assigned
+             to this signaling channel. Usually, this is the
+             subaddress as defined in Q.931.
+             If there is no such number defined or required, this is
+             a zero length string.
+             The subaddress is used for incoming calls as well as
+             for outgoing calls.
+             The subaddress is an user supplied string of up to 20
+             IA5 characters and is transmitted transparently through
+             the network."
+        REFERENCE
+            "ITU-T I.330, Q.931 chapter 4.5.11"
+        DEFVAL { "" }
+        ::= { isdnSignalingEntry 5 }
+
+isdnSignalingBchannelCount OBJECT-TYPE
+        SYNTAX      Integer32 (1..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The total number of B channels (bearer channels)
+             managed by this signaling channel. The default value
+             of this object depends on the physical interface type
+             and is either 2 for Basic Rate interfaces or
+
+             24 (30) for Primary Rate interfaces."
+        ::= { isdnSignalingEntry 6 }
+
+isdnSignalingInfoTrapEnable    OBJECT-TYPE
+        SYNTAX      INTEGER {
+            enabled(1),
+            disabled(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Indicates whether isdnMibCallInformation traps
+             should be generated for calls on this signaling
+             channel."
+        DEFVAL      { disabled }
+        ::= { isdnSignalingEntry 7 }
+
+isdnSignalingStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object is used to create and delete rows in the
+             isdnSignalingTable."
+        ::= { isdnSignalingEntry 8 }
+
+-- Signaling channel statistics table
+-- There is one entry for each signaling connection
+-- in this table.
+-- Note that the ifEntry also has some statistics information.
+
+isdnSignalingStatsTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnSignalingStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "ISDN signaling table containing statistics
+             information for all ISDN signaling channels
+             on this managed device.
+             Only statistical information which is not already being
+             counted in the ifTable is being defined in this table."
+        ::= { isdnSignalingGroup 3 }
+
+isdnSignalingStatsEntry OBJECT-TYPE
+        SYNTAX      IsdnSignalingStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the ISDN Signaling statistics Table."
+        AUGMENTS { isdnSignalingEntry }
+        ::= { isdnSignalingStatsTable 1 }
+
+IsdnSignalingStatsEntry ::= SEQUENCE {
+            isdnSigStatsInCalls         Counter32,
+            isdnSigStatsInConnected     Counter32,
+            isdnSigStatsOutCalls        Counter32,
+            isdnSigStatsOutConnected    Counter32,
+            isdnSigStatsChargedUnits    Counter32
+        }
+
+isdnSigStatsInCalls OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of incoming calls on this interface."
+        ::= { isdnSignalingStatsEntry 1 }
+
+isdnSigStatsInConnected OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of incoming calls on this interface
+             which were actually connected."
+        ::= { isdnSignalingStatsEntry 2 }
+
+isdnSigStatsOutCalls OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of outgoing calls on this interface."
+        ::= { isdnSignalingStatsEntry 3 }
+
+isdnSigStatsOutConnected OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of outgoing calls on this interface
+             which were actually connected."
+        ::= { isdnSignalingStatsEntry 4 }
+
+isdnSigStatsChargedUnits OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of charging units on this interface since
+             system startup.
+             Only the charging units applying to the local interface,
+             i.e. for originated calls or for calls with 'Reverse
+             charging' being active, are counted here."
+        ::= { isdnSignalingStatsEntry 5 }
+
+--
+-- The LAPD table
+
+isdnLapdTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnLapdEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Table containing configuration and statistics
+             information for all LAPD (D channel Data Link)
+             interfaces on this managed device.
+             Only statistical information which is not already being
+             counted in the ifTable is being defined in this table."
+        ::= { isdnSignalingGroup 4 }
+
+isdnLapdEntry OBJECT-TYPE
+        SYNTAX      IsdnLapdEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the LAPD Table."
+        INDEX { ifIndex }
+        ::= { isdnLapdTable 1 }
+
+IsdnLapdEntry ::= SEQUENCE {
+            isdnLapdPrimaryChannel  TruthValue,
+            isdnLapdOperStatus      INTEGER,
+            isdnLapdPeerSabme       Counter32,
+            isdnLapdRecvdFrmr       Counter32
+        }
+
+isdnLapdPrimaryChannel OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "If set to true(1), this D channel is the designated
+             primary D channel if D channel backup is active.
+
+             There must be exactly one primary D channel
+             configured. If D channel backup is not used, this
+             object has a value of true(1)."
+        REFERENCE
+            "Q.931 [8], Annex F, D channel backup procedures."
+        ::= { isdnLapdEntry 1 }
+
+isdnLapdOperStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+            inactive(1),
+            l1Active(2),
+            l2Active(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The operational status of this interface:
+
+             inactive  all layers are inactive
+             l1Active  layer 1 is activated,
+                       layer 2 datalink not established
+             l2Active  layer 1 is activated,
+                       layer 2 datalink established."
+        ::= { isdnLapdEntry 2 }
+
+isdnLapdPeerSabme OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of peer SABME frames received on this
+             interface. This is the number of peer-initiated
+             new connections on this interface."
+        ::= { isdnLapdEntry 3 }
+
+isdnLapdRecvdFrmr OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of LAPD FRMR response frames received.
+             This is the number of framing errors on this
+             interface."
+        ::= { isdnLapdEntry 4 }
+
+--
+-- Optional groups follow here.
+
+-- The Terminal Endpoint group and table
+
+-- This table is required only if TEI values or SPID numbers
+-- have to be entered.
+-- The ifIndex values for this table are identical to those of
+-- the isdnSignalingChannel table.
+
+isdnEndpointGroup OBJECT IDENTIFIER ::= { isdnMibObjects 4 }
+
+isdnEndpointGetIndex OBJECT-TYPE
+        SYNTAX      TestAndIncr
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The recommended procedure for selecting a new index for
+             isdnEndpointTable row creation is to GET the value of
+             this object, and then to SET the object with the same
+             value. If the SET operation succeeds, the manager can use
+             this value as an index to create a new row in this table."
+        REFERENCE
+            "RFC1903, TestAndIncr textual convention."
+        ::= { isdnEndpointGroup 1 }
+
+isdnEndpointTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnEndpointEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Table containing configuration for Terminal
+             Endpoints."
+        ::= { isdnEndpointGroup 2 }
+
+isdnEndpointEntry OBJECT-TYPE
+        SYNTAX      IsdnEndpointEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Terminal Endpoint Table. The value
+             of isdnEndpointIfType must be supplied for a row
+             in this table to become active."
+        INDEX { isdnEndpointIndex }
+        ::= { isdnEndpointTable 1 }
+
+IsdnEndpointEntry ::= SEQUENCE {
+            isdnEndpointIndex       INTEGER,
+            isdnEndpointIfIndex     InterfaceIndex,
+            isdnEndpointIfType      IANAifType,
+            isdnEndpointTeiType     INTEGER,
+            isdnEndpointTeiValue    INTEGER,
+            isdnEndpointSpid        DisplayString,
+            isdnEndpointStatus      RowStatus
+        }
+
+isdnEndpointIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The index value which uniquely identifies an entry
+             in the isdnEndpointTable."
+        ::= { isdnEndpointEntry 1 }
+
+isdnEndpointIfIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The ifIndex value of the interface associated with this
+             Terminal Endpoint."
+        ::= { isdnEndpointEntry 2 }
+
+isdnEndpointIfType OBJECT-TYPE
+        SYNTAX      IANAifType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The interface type for this Terminal Endpoint.
+             Interface types of x25ple(40) and isdn(63) are allowed.
+             The interface type is identical to the value of
+             ifType in the associated ifEntry."
+        ::= { isdnEndpointEntry 3 }
+
+isdnEndpointTeiType OBJECT-TYPE
+        SYNTAX      INTEGER {
+            dynamic(1),
+            static(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The type of TEI (Terminal Endpoint Identifier)
+             used for this Terminal Endpoint. In case of dynamic(1),
+             the TEI value is selected by the switch. In
+             case of static(2), a valid TEI value has to be
+             entered in the isdnEndpointTeiValue object.
+             The default value for this object depends on the
+
+             interface type as well as the Terminal Endpoint type.
+             On Primary Rate interfaces the default value is
+             static(2). On Basic Rate interfaces the default value
+             is dynamic(1) for isdn(63) Terminal Endpoints and
+             static(2) for x25ple(40) Terminal Endpoints."
+        ::= { isdnEndpointEntry 4 }
+
+isdnEndpointTeiValue OBJECT-TYPE
+        SYNTAX      INTEGER ( 0..255 )
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The TEI (Terminal Endpoint Identifier) value
+             for this Terminal Endpoint. If isdnEndpointTeiType
+             is set to static(2), valid numbers are 0..63,
+             while otherwise the value is set internally.
+             The default value of this object is 0 for static
+             TEI assignment.
+             The default value for dynamic TEI assignment is also
+             0 as long as no TEI has been assigned. After TEI
+             assignment, the assigned TEI value is returned."
+        ::= { isdnEndpointEntry 5 }
+
+isdnEndpointSpid OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The Service profile IDentifier (SPID) information
+             for this Terminal Endpoint.
+
+             The SPID is composed of 9-20 numeric characters.
+
+             This information has to be defined in addition to
+             the local number for some switch protocol types,
+             e.g. Bellcore NI-1 and NI-2.
+
+             If this object is not required, it is a
+             zero length string."
+        REFERENCE
+            "Bellcore SR-NWT-001953, Generic Guidelines for ISDN
+             Terminal Equipment on Basic Access Interfaces,
+             Chapter 8.5.1."
+        DEFVAL { "" }
+        ::= { isdnEndpointEntry 6 }
+
+isdnEndpointStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object is used to create and delete rows in the
+             isdnEndpointTable."
+        ::= { isdnEndpointEntry 7 }
+
+--
+-- The Directory Number group
+--
+
+isdnDirectoryGroup OBJECT IDENTIFIER ::= { isdnMibObjects 5 }
+
+isdnDirectoryTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF IsdnDirectoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Table containing Directory Numbers."
+        ::= { isdnDirectoryGroup 1 }
+
+isdnDirectoryEntry OBJECT-TYPE
+        SYNTAX      IsdnDirectoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry in the Directory Number Table. All objects
+             in an entry must be set for a new row to become active."
+        INDEX { isdnDirectoryIndex }
+        ::= { isdnDirectoryTable 1 }
+
+IsdnDirectoryEntry ::= SEQUENCE {
+            isdnDirectoryIndex      INTEGER,
+            isdnDirectoryNumber     DisplayString,
+            isdnDirectorySigIndex   INTEGER,
+            isdnDirectoryStatus     RowStatus
+        }
+
+isdnDirectoryIndex OBJECT-TYPE
+        SYNTAX      INTEGER ( 1..'7fffffff'h )
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The index value which uniquely identifies an entry
+             in the isdnDirectoryTable."
+        ::= { isdnDirectoryEntry 1 }
+
+isdnDirectoryNumber OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "A Directory Number. Directory Numbers are used
+             to identify incoming calls on the signaling
+             channel given in isdnDirectorySigIndex.
+
+             The format of this information largely depends on the type
+             of switch or PBX the device is connected to. Therefore,
+             the detailed format of this information is not
+             specified and is implementation dependent.
+
+             If possible, the agent should implement this information
+             using the E.164 number format. In this case, the number
+             must start with '+'. Otherwise, IA5 number digits must
+             be used."
+        REFERENCE
+            "ITU-T E.164, Q.931 chapter 4.5.10"
+        ::= { isdnDirectoryEntry 2 }
+
+isdnDirectorySigIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..2147483647)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "An index pointing to an ISDN signaling channel.
+             Incoming calls are accepted on this
+             signaling channel if the isdnDirectoryNumber is
+             presented as Called Number in the SETUP message."
+        ::= { isdnDirectoryEntry 3 }
+
+isdnDirectoryStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object is used to create and delete rows in the
+             isdnDirectoryTable."
+        ::= { isdnDirectoryEntry 4 }
+
+-- Traps
+
+isdnMibTrapPrefix OBJECT IDENTIFIER ::= { isdnMib 2 }
+isdnMibTraps OBJECT IDENTIFIER ::= { isdnMibTrapPrefix 0 }
+
+isdnMibCallInformation NOTIFICATION-TYPE
+        OBJECTS {
+
+            ifIndex,                    -- isdnBearerTable ifIndex
+            isdnBearerOperStatus,
+            isdnBearerPeerAddress,
+            isdnBearerPeerSubAddress,
+            isdnBearerCallSetupTime,
+            isdnBearerInfoType,
+            isdnBearerCallOrigin
+        }
+        STATUS      current
+        DESCRIPTION
+            "This trap/inform is sent to the manager under the
+             following condidions:
+             - on incoming calls for each call which is rejected for
+               policy reasons (e.g. unknown neighbor or access
+               violation)
+             - on outgoing calls whenever a call attempt is determined
+               to have ultimately failed. In the event that call retry
+               is active, then this will be after all retry attempts
+               have failed.
+             - whenever a call connects. In this case, the object
+               isdnBearerCallConnectTime should be included in the
+               trap.
+
+             Only one such trap is sent in between successful or
+             unsuccessful call attempts from or to a single neighbor;
+             subsequent call attempts result in no trap.
+
+             If the Dial Control MIB objects dialCtlNbrCfgId and
+             dialCtlNbrCfgIndex are known by the entity generating
+             this trap, both objects should be included in the trap
+             as well. The receipt of this trap with no dial neighbor
+             information indicates that the manager must poll the
+             callHistoryTable of the Dial Control MIB to see what
+             changed."
+        ::= { isdnMibTraps 1 }
+
+--
+-- conformance information
+--
+
+isdnMibConformance OBJECT IDENTIFIER ::= { isdnMib 2 }
+isdnMibCompliances OBJECT IDENTIFIER ::= { isdnMibConformance 1 }
+isdnMibGroups      OBJECT IDENTIFIER ::= { isdnMibConformance 2 }
+
+-- compliance statements
+
+isdnMibCompliance MODULE-COMPLIANCE
+        STATUS      current
+        DESCRIPTION
+            "The compliance statement for entities which implement
+             the ISDN MIB."
+        MODULE       -- this module
+
+-- unconditionally mandatory groups
+        MANDATORY-GROUPS {
+            isdnMibSignalingGroup,
+            isdnMibBearerGroup,
+            isdnMibNotificationsGroup
+        }
+
+-- conditionally mandatory group
+        GROUP       isdnMibBasicRateGroup
+        DESCRIPTION
+            "The isdnMibBasicRateGroup is mandatory for entities
+             supporting ISDN Basic Rate interfaces."
+
+-- optional groups
+        GROUP       isdnMibEndpointGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all systems
+             that attach to ISDN interfaces."
+
+        GROUP       isdnMibDirectoryGroup
+        DESCRIPTION
+            "Implementation of this group is optional for all systems
+             that attach to ISDN interfaces."
+
+        OBJECT      isdnBasicRateIfType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      isdnBasicRateLineTopology
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      isdnBasicRateIfMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+
+        OBJECT      isdnBasicRateSignalMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "It is conformant to implement this object as read-only."
+        ::= { isdnMibCompliances 1 }
+
+-- units of conformance
+
+isdnMibBasicRateGroup OBJECT-GROUP
+        OBJECTS {
+            isdnBasicRateIfType,
+            isdnBasicRateLineTopology,
+            isdnBasicRateIfMode,
+            isdnBasicRateSignalMode
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects required for ISDN Basic Rate
+             physical interface configuration and statistics."
+        ::= { isdnMibGroups 1 }
+
+isdnMibBearerGroup OBJECT-GROUP
+        OBJECTS {
+            isdnBearerChannelType,
+            isdnBearerOperStatus,
+            isdnBearerChannelNumber,
+            isdnBearerPeerAddress,
+            isdnBearerPeerSubAddress,
+            isdnBearerCallOrigin,
+            isdnBearerInfoType,
+            isdnBearerMultirate,
+            isdnBearerCallSetupTime,
+            isdnBearerCallConnectTime,
+            isdnBearerChargedUnits
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects required for ISDN Bearer channel
+             control and statistics."
+        ::= { isdnMibGroups 2 }
+
+isdnMibSignalingGroup OBJECT-GROUP
+        OBJECTS {
+            isdnSignalingGetIndex,
+            isdnSignalingIfIndex,
+            isdnSignalingProtocol,
+            isdnSignalingCallingAddress,
+            isdnSignalingSubAddress,
+            isdnSignalingBchannelCount,
+            isdnSignalingInfoTrapEnable,
+            isdnSignalingStatus,
+            isdnSigStatsInCalls,
+            isdnSigStatsInConnected,
+            isdnSigStatsOutCalls,
+            isdnSigStatsOutConnected,
+            isdnSigStatsChargedUnits,
+            isdnLapdPrimaryChannel,
+            isdnLapdOperStatus,
+            isdnLapdPeerSabme,
+            isdnLapdRecvdFrmr
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects required for ISDN D channel
+             configuration and statistics."
+        ::= { isdnMibGroups 3 }
+
+isdnMibEndpointGroup OBJECT-GROUP
+        OBJECTS {
+            isdnEndpointGetIndex,
+            isdnEndpointIfIndex,
+            isdnEndpointIfType,
+            isdnEndpointTeiType,
+            isdnEndpointTeiValue,
+            isdnEndpointSpid,
+            isdnEndpointStatus
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects describing Terminal Endpoints."
+        ::= { isdnMibGroups 4 }
+
+isdnMibDirectoryGroup OBJECT-GROUP
+        OBJECTS {
+            isdnDirectoryNumber,
+            isdnDirectorySigIndex,
+            isdnDirectoryStatus
+        }
+        STATUS      current
+        DESCRIPTION
+            "A collection of objects describing directory numbers."
+        ::= { isdnMibGroups 5 }
+
+isdnMibNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { isdnMibCallInformation }
+    STATUS        current
+    DESCRIPTION
+            "The notifications which a ISDN MIB entity is
+             required to implement."
+    ::= { isdnMibGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/ISIS-MIB.mib b/snmp_builder/mibs/ISIS-MIB.mib
new file mode 100644
index 0000000..22d86e8
--- /dev/null
+++ b/snmp_builder/mibs/ISIS-MIB.mib
@@ -0,0 +1,4317 @@
+ISIS-MIB DEFINITIONS ::= BEGIN
+     IMPORTS
+        TEXTUAL-CONVENTION, RowStatus, TruthValue, TimeStamp
+                FROM SNMPv2-TC               -- RFC2579
+        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+            Unsigned32, Counter32, mib-2
+                FROM SNMPv2-SMI              -- RFC2578
+        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                FROM SNMPv2-CONF             -- RFC2580
+        SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB      -- RFC2571
+        IndexInteger, IndexIntegerNextFree
+                FROM DIFFSERV-MIB            -- RFC3289
+        InterfaceIndex
+                FROM IF-MIB                  -- RFC2863
+        InetAddressType, InetAddress, InetAddressPrefixLength
+                FROM INET-ADDRESS-MIB;       -- RFC3291
+
+    isisMIB MODULE-IDENTITY
+        LAST-UPDATED "200604040000Z" -- April 4, 2006, midnight
+        ORGANIZATION "IETF IS-IS for IP Internets Working Group"
+        CONTACT-INFO
+            "IS-IS for IP Internets working Group
+             http://www.ietf.org/html.charters/isis-charter.html
+             isis-wg@ietf.org
+
+             Jeff Parker
+             Department of Computer Science
+             Middlebury College,
+             Middlebury, Vermont 05753
+             jeffp at middlbury dot edu"
+        DESCRIPTION
+             "This document describes a management information base for
+             the IS-IS Routing protocol, as described in ISO 10589,
+             when it is used to construct routing tables for IP
+             networks, as described in RFC 1195.
+
+             This document is based on a 1994 IETF document by Chris
+             Gunner.  This version has been modified to include
+             current syntax, to exclude portions of the protocol that
+             are not relevant to IP, and to add management support for
+             current practice.
+
+             Copyright (C) The Internet Society (2006).  This version
+             of this MIB module is part of RFC 4444; see the RFC
+             itself for full legal notices."
+
+        REVISION "200604040000Z" -- April 4, 2006, midnight
+        DESCRIPTION
+            "Initial version, published as RFC 4444."
+    ::= { mib-2 138 }
+
+-- Top-level structure of the MIB
+
+isisNotifications       OBJECT IDENTIFIER ::= { isisMIB 0 }
+isisObjects             OBJECT IDENTIFIER ::= { isisMIB 1 }
+isisConformance         OBJECT IDENTIFIER ::= { isisMIB 2 }
+
+-- OBJECT IDENTIFIER definitions
+
+-- System wide attributes.
+isisSystem OBJECT IDENTIFIER ::= { isisObjects 1 }
+
+-- Attributes associated with the domain or with the area.
+isisSysLevel OBJECT IDENTIFIER ::= { isisObjects 2 }
+
+-- Attributes associated with one Circuit
+isisCirc OBJECT IDENTIFIER ::= { isisObjects 3 }
+
+-- Attributes associated with area or domain relevant within a Circuit.
+isisCircLevelValues OBJECT IDENTIFIER ::= { isisObjects 4 }
+
+-- System and circuit counters.
+isisCounters OBJECT IDENTIFIER ::= { isisObjects 5 }
+
+-- Attributes associated with an adjacent Protocol Peer.
+isisISAdj OBJECT IDENTIFIER ::= { isisObjects 6 }
+
+-- Attributes associated with a configured address.
+isisReachAddr OBJECT IDENTIFIER ::= { isisObjects 7 }
+
+-- Attributes associated with IP routes learned by
+-- configuration or through another protocol.
+isisIPReachAddr OBJECT IDENTIFIER ::= { isisObjects 8 }
+
+-- The collection of Link State PDUs known to the Intermediate System
+isisLSPDataBase OBJECT IDENTIFIER ::= { isisObjects 9 }
+
+-- Objects included in Notifications.
+isisNotification OBJECT IDENTIFIER ::= { isisObjects 10 }
+
+-- Type definitions
+
+    IsisOSINSAddress ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "OSI Network Service Address, e.g., NSAP, SNPA, or Network
+             Entity Title"
+        SYNTAX OCTET STRING (SIZE(0..20))
+
+    IsisSystemID ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "The ID for an Intermediate System.  This should
+             be unique within a network, and is included
+             in all PDUs originated by an Intermediate System.
+             The protocol does not place any meanings upon
+             the bits, other than using ordering to break
+             ties in electing a Designated IS on a LAN."
+        REFERENCE "{ISIS.aoi systemId (119)}"
+        SYNTAX OCTET STRING (SIZE(6))
+
+    IsisLinkStatePDUID ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "The 8-byte Link State PDU (LSP) ID,
+             consisting of the 6-byte SystemID of the
+             originating IS; a one-byte PseudoNode ID,
+             which is 0 unless the LSP represents the
+             topology of a LAN; and a one-byte LSP
+             fragment number that is issued in sequence,
+             starting with 0.  Non-zero PseudoNode IDs
+             need to be unique to the IS but need not
+             match the IfIndex."
+        REFERENCE "{See section 9.8 of ISO 10589}"
+        SYNTAX OCTET STRING (SIZE(8))
+
+    IsisAdminState ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "Type used in enabling and disabling a row."
+        SYNTAX INTEGER
+            {
+                on(1),
+                off(2)
+            }
+
+    IsisLSPBuffSize ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "Integer sub-range for maximum LSP size."
+        SYNTAX Unsigned32 (512..16000)
+
+    IsisLevelState ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "States of the IS-IS protocol."
+        SYNTAX INTEGER
+            {
+                off (1),
+                on (2),
+                waiting (3),
+                overloaded(4)
+            }
+
+    IsisSupportedProtocol ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "Types of network protocol supported by Integrated IS-IS.
+             The values for ISO8473 and IP are those registered for
+             these protocols in ISO TR9577."
+        REFERENCE "{See section 5.3.1 of RFC 1195}"
+        SYNTAX INTEGER
+            {
+                iso8473(129),
+                ipV6(142),
+                ip(204)
+            }
+
+    IsisDefaultMetric ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "Integer sub-range for default metric for single hop.
+             ISO 10589 provides for 4 types of metric.  Only the
+             'default' metric is used in practice."
+        REFERENCE "{See section 7.2.2 of ISO 10589}"
+        SYNTAX Unsigned32 (0..63)
+
+    IsisWideMetric ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "Wide metric for IS Neighbors.  ISO 10589 provides a
+             6-bit metric.  Traffic Engineering extensions provide
+             24-bit metrics."
+        REFERENCE "{See section 3 of RFC 3784}"
+        SYNTAX Unsigned32 (0..16777215)
+
+    IsisFullMetric ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "Full metric for IP Routes.  Traffic Engineering extensions
+             provide 32-bit metrics."
+        REFERENCE "{See section 4 of RFC 3784}"
+        SYNTAX Unsigned32
+
+    IsisMetricType ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "Is this an Internal or External Metric?"
+        REFERENCE "{See section 7.2.2 of ISO 10589}"
+        SYNTAX INTEGER
+            {
+                internal(1),
+                external(2)
+            }
+
+    IsisMetricStyle ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "Do we use RFC 1195 style metrics or wide metrics?"
+        REFERENCE "{See section 5 of RFC 3787}"
+        SYNTAX INTEGER
+            {
+                narrow(1),
+                wide(2),
+                both(3)
+            }
+
+    IsisISLevel ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "Identifies a level."
+        REFERENCE "{See definitions 3.6.1 and 3.6.11 of ISO 10589}"
+        SYNTAX INTEGER
+            {
+                area(1),        -- L1
+                domain(2)       -- L2
+            }
+
+    IsisLevel ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "Identifies one or more levels."
+        REFERENCE "{See definitions 3.6.1 and 3.6.11 of ISO 10589}"
+        SYNTAX INTEGER
+            {
+                level1(1),
+                level2(2),
+                level1and2(3)
+            }
+
+    IsisPDUHeader ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "A block to contain the header from a PDU."
+        SYNTAX OCTET STRING (SIZE(0..64))
+
+    IsisCircuitID ::= TEXTUAL-CONVENTION
+        STATUS current
+        DESCRIPTION
+            "ID for a circuit."
+        REFERENCE "{See section 7.2.7 of ISO 10589}"
+        SYNTAX OCTET STRING (SIZE(0|7))
+
+    IsisISPriority ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "Integer sub-range for IS-IS priority."
+        REFERENCE "{See section 9.5 of ISO 10589}"
+        SYNTAX Unsigned32 (0..127)
+
+    IsisUnsigned16TC ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "An Unsigned32 further restricted to 16 bits.  Note that
+             the ASN.1 BER encoding may still require 24 bits for
+             some values."
+        SYNTAX Unsigned32 (0..65535)
+
+    IsisUnsigned8TC ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "d"
+        STATUS current
+        DESCRIPTION
+            "An Unsigned32 further restricted to 8 bits.  Note that
+             the ASN.1 BER encoding may still require 16 bits for
+             some values."
+        SYNTAX Unsigned32 (0..255)
+
+-- Behavior Definitions
+
+-- ResettingTimer behavior definition
+--
+
+-- "This behavior applies to objects that specify the interval
+-- between events in the operation of the protocol state machine.
+-- If the value of such an object is set to a new value while
+-- the protocol state machine is in operation, the implementation
+-- shall take the necessary steps to ensure that for any time
+-- interval that was in progress when the value of the
+-- corresponding object was changed, the next expiration of that
+-- interval takes place the specified time after the original
+-- start of that interval, or immediately, whichever is later.
+-- The precision with which this time shall be implemented shall
+-- be the same as that associated with the basic operation of
+-- the timer object."
+
+-- ReplaceOnlyWhileDisabled behavior definition
+-- "This behavior applies to objects that may not be modified
+-- while the corresponding table row's variable of type
+-- IsisAdminState is in state on."
+
+-- ManualOrAutomatic behavior definition
+-- "This behavior applies to objects that are read-write
+-- if the object was created manually.  Objects that were
+-- created automatically that have this behavior are
+-- read-only.
+
+    isisSysObject  OBJECT IDENTIFIER ::= { isisSystem 1 }
+
+    isisSysVersion OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                unknown(0),
+                one(1)
+            }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The version number of the IS-IS protocol that
+             is implemented."
+        REFERENCE "{ISIS.aoi version (1)}"
+        DEFVAL { one }
+    ::= { isisSysObject 1 }
+
+    isisSysLevelType OBJECT-TYPE
+        SYNTAX IsisLevel
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "At which levels is the Intermediate System
+             running? This object may not be modified when
+             the isisSysAdminState variable is in state 'on'
+             for this Intermediate System.
+
+             Configured values MUST survive an agent reboot."
+        REFERENCE "{ISIS.aoi iSType (2)}"
+        DEFVAL { level1and2 }
+    ::= { isisSysObject 2 }
+
+    isisSysID OBJECT-TYPE
+        SYNTAX IsisSystemID
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The ID for this Intermediate System.
+             This value is appended to each of the
+             area addresses to form the Network Entity Titles.
+             The derivation of a value for this object is
+             implementation specific.  Some implementations may
+             automatically assign values and not permit an
+             SNMP write, while others may require the value
+             to be set manually.
+
+             Configured values MUST survive an agent reboot."
+        REFERENCE "{ISIS.aoi systemId (119)}"
+    ::= { isisSysObject 3 }
+
+    isisSysMaxPathSplits OBJECT-TYPE
+        SYNTAX Unsigned32 (1..32)
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Maximum number of paths with equal routing metric value
+             which it is permitted to split between.  This object
+             may not be modified when the isisSysAdminState variable
+             is in state 'on' for this Intermediate System.
+
+             Configured values MUST survive an agent reboot."
+        REFERENCE "{ISIS.aoi maximumPathSplits (3)}"
+        DEFVAL { 2 }
+    ::= { isisSysObject 4 }
+
+    isisSysMaxLSPGenInt OBJECT-TYPE
+        SYNTAX Unsigned32 (1..65235)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Maximum interval, in seconds, between generated LSPs
+             by this Intermediate System.  This object follows
+             the ResettingTimer behavior.  The value must be
+             greater than any value configured for
+             isisSysLevelMinLSPGenInt, and should be at least 300
+             seconds less than isisSysMaxAge.
+
+             Configured values MUST survive an agent reboot."
+        REFERENCE "{ISIS.aoi maximumLSPGenerationInterval (6)}"
+        DEFVAL { 900 }
+    ::= { isisSysObject 5 }
+
+    isisSysPollESHelloRate OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (1..65535)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The value, in seconds, to be used for the suggested ES
+             configuration timer in ISH PDUs when soliciting the ES
+             configuration.
+
+             Configured values MUST survive an agent reboot."
+        REFERENCE "{ISIS.aoi pollESHelloRate (13)}"
+        DEFVAL { 50 }
+    ::= { isisSysObject 6 }
+
+    isisSysWaitTime OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (1..65535)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Number of seconds to delay in state 'waiting' before
+             entering the state 'on'.  This object follows the
+             ResettingTimer behavior.
+
+             Configured values MUST survive an agent reboot."
+        REFERENCE "{ISIS.aoi waitingTime (15)}"
+        DEFVAL { 60 }
+    ::= { isisSysObject 7 }
+
+    isisSysAdminState OBJECT-TYPE
+        SYNTAX IsisAdminState
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The administrative state of this Intermediate
+             System.  Setting this object to the value 'on'
+             when its current value is 'off' enables
+             the Intermediate System.
+
+             Configured values MUST survive an agent reboot."
+        DEFVAL { off }
+    ::= { isisSysObject 8 }
+
+    isisSysL2toL1Leaking OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "If true, allow the router to leak L2 routes into L1.
+
+             Configured values MUST survive an agent reboot."
+        DEFVAL { false }
+    ::= { isisSysObject 9 }
+
+    isisSysMaxAge OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (350..65535)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Value to place in RemainingLifeTime field of
+             the LSPs we generate.
+             This should be at least 300 seconds greater than
+             isisSysMaxLSPGenInt.
+
+             Configured values MUST survive an agent reboot."
+        DEFVAL { 1200 }
+    ::= { isisSysObject 10 }
+
+    isisSysReceiveLSPBufferSize OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (1492..16000)
+        UNITS "bytes"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Size of the largest buffer we are designed or
+             configured to store.  This should be at least
+             as big as the maximum isisSysLevelOrigLSPBuffSize
+             supported by the system.
+
+             If resources allow, we will store and flood LSPs
+             larger than isisSysReceiveLSPBufferSize, as this
+             can help avoid problems in networks with different
+             values for isisSysLevelOrigLSPBuffSize.
+
+             Configured values MUST survive an agent reboot."
+        DEFVAL { 1492 }
+    ::= { isisSysObject 11 }
+
+    isisSysProtSupported OBJECT-TYPE
+        SYNTAX BITS {
+                    iso8473 (0),
+                    ipv4 (1),
+                    ipv6 (2)
+                  }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "This attribute contains the set of protocols
+             supported by this Intermediate System."
+    ::= { isisSysObject 12 }
+
+    isisSysNotificationEnable OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "If this object is set to true(1), then it enables
+             the emission of IS-IS Notifications.  If it is
+             set to false(2), these notifications are not sent.
+
+             Configured values MUST survive an agent reboot."
+        DEFVAL { true }
+    ::= { isisSysObject 13 }
+
+-- The Level 1 Manual Area Address Table
+
+    isisManAreaAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisManAreaAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The set of manual area addresses configured on this
+             Intermediate System.
+
+             At least one row in which the value of
+             isisManAreaAddrExistState is active must be present.
+             The maximum number of rows in this table for
+
+             which the object isisManAreaAddrExistState has the
+             value active is 3.
+
+             An attempt to create more than 3 rows of
+             isisManAreaAddrEntry with state 'active' in one
+             instance of the IS-IS protocol should
+             return inconsistentValue."
+        REFERENCE "{ISIS.aoi manualAreaAddresses (10)}"
+    ::= { isisSystem 2 }
+
+    isisManAreaAddrEntry OBJECT-TYPE
+        SYNTAX IsisManAreaAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one area address manually configured
+             on this system.
+
+             Dynamically created rows MUST survive an agent reboot."
+        INDEX { isisManAreaAddr }
+    ::= { isisManAreaAddrTable 1 }
+
+    IsisManAreaAddrEntry ::=
+        SEQUENCE {
+            isisManAreaAddr
+                IsisOSINSAddress,
+            isisManAreaAddrExistState
+                RowStatus
+            }
+
+    isisManAreaAddr OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "A manually configured area address for this system.
+
+             Note: An index for the entry {1, {49.0001} active} in
+             this table would be the ordered pair
+             (1, (0x03 0x49 0x00 0x01)), as the length of an octet
+             string is part of the OID."
+    ::= { isisManAreaAddrEntry 1 }
+
+    isisManAreaAddrExistState OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The state of the isisManAreaAddrEntry.  If the
+             isisSysAdminState for this Intermediate System is 'on' and
+             an attempt is made to set this object to the value
+             'destroy' or 'notInService' when this is the only
+             isisManAreaAddrEntry in state 'active' for this
+             Intermediate System should return inconsistentValue.
+
+             A row entry cannot be modified when the value of this
+             object is 'active'."
+    ::= { isisManAreaAddrEntry 2 }
+
+-- The Level 1 Area Address Table
+
+-- The Level 1 Area Address Table contains the
+-- union of the sets of relevant area addresses configured
+-- or learned from Level 1 LSPs received by this Intermediate System.
+
+    isisAreaAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisAreaAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The union of the sets of area addresses reported in all
+             Level 1 LSPs with fragment number zero generated by this
+             Intermediate System, or received from other Intermediate
+             Systems that are reachable via Level 1 routing."
+        REFERENCE "{ISIS.aoi areaAddresses (18)}"
+    ::= { isisSystem 3 }
+
+    isisAreaAddrEntry OBJECT-TYPE
+        SYNTAX IsisAreaAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one area address reported in a
+             Level 1 LSP generated or received by this Intermediate
+             System.
+
+             Dynamically learned rows do not survive an agent reboot."
+        INDEX { isisAreaAddr }
+    ::= { isisAreaAddrTable 1 }
+
+    IsisAreaAddrEntry ::=
+        SEQUENCE {
+            isisAreaAddr
+                IsisOSINSAddress
+            }
+
+    isisAreaAddr OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "An area address reported in a Level 1 LSP."
+    ::= { isisAreaAddrEntry 1 }
+
+-- The Summary Address Table
+
+-- The Summary Address Table contains the set of summary
+-- addresses manually configured for the Intermediate System.
+--
+-- This is used to control leaking L1 routes into L2.
+
+    isisSummAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisSummAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The set of IP summary addresses to use in forming
+             summary TLVs originated by this Intermediate System.
+
+             An administrator may use a summary address to combine
+             and modify IP Reachability announcements.  If the
+             Intermediate system can reach any subset of the summary
+             address, the summary address MUST be announced instead,
+             at the configured metric."
+    ::= { isisSystem 4 }
+
+    isisSummAddrEntry OBJECT-TYPE
+        SYNTAX IsisSummAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one IP summary address.
+
+             Dynamically created rows MUST survive an agent reboot.
+
+             Implementers need to be aware that if the total number
+             of elements (octets or sub-identifiers) in
+             isisSummAddress and isisSummAddrPrefixLen is too great,
+             then OIDs of column instances in this table will have
+             more than 128 subidentifiers and cannot be accessed
+             using SNMPv1, SNMPv2c, or SNMPv3."
+        INDEX { isisSummAddressType,
+                isisSummAddress,
+                isisSummAddrPrefixLen }
+    ::= { isisSummAddrTable 1 }
+
+    IsisSummAddrEntry ::=
+        SEQUENCE {
+            isisSummAddressType
+                InetAddressType,
+            isisSummAddress
+                InetAddress,
+            isisSummAddrPrefixLen
+                InetAddressPrefixLength,
+            isisSummAddrExistState
+                RowStatus,
+            isisSummAddrMetric
+                IsisDefaultMetric,
+            isisSummAddrFullMetric
+                IsisFullMetric
+        }
+
+    isisSummAddressType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The Type of IP address for this summary address."
+    ::= { isisSummAddrEntry 1 }
+
+    isisSummAddress OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The IP Address value for this summary address.
+             The address must not contain any set host bits
+             (bits set after the address prefix determined by
+             isisSummAddrPrefixLen).
+
+             The type of this address is determined by the value of
+             the isisSummAddressType object."
+    ::= { isisSummAddrEntry 2 }
+
+    isisSummAddrPrefixLen OBJECT-TYPE
+        SYNTAX InetAddressPrefixLength
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The Length of the IP NetMask for this summary address.
+
+             The values for the index objects isisSummAddress and
+
+             isisSummAddrPrefixLen must be consistent.  When the value
+             of isisSummAddress (excluding the zone index, if one
+             is present) is x, then the bitwise logical-AND
+             of x with the value of the mask formed from the
+             corresponding index object isisSummAddrPrefixLen MUST be
+             equal to x.  If not, then the index pair is not
+             consistent, and an inconsistentName error must be
+             returned on SET or CREATE requests."
+    ::= { isisSummAddrEntry 3 }
+
+    isisSummAddrExistState OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The existence state of this summary address.  Support
+             for 'createAndWait' and 'notInService' is not required.
+
+             A row entry cannot be modified when the value of this
+             object is 'active'."
+    ::= { isisSummAddrEntry 4 }
+
+    isisSummAddrMetric OBJECT-TYPE
+        SYNTAX IsisDefaultMetric
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The metric value to announce this summary
+             address within LSPs generated by this system."
+        DEFVAL { 20 }
+    ::= { isisSummAddrEntry 5 }
+
+    isisSummAddrFullMetric OBJECT-TYPE
+        SYNTAX IsisFullMetric
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The wide metric value to announce this summary
+             address within LSPs generated by this system."
+        DEFVAL { 20 }
+    ::= { isisSummAddrEntry 6 }
+
+-- The Redistribution table defines addresses that should be
+-- leaked from L2 to L1 if isisSysL2toL1Leaking is enabled.
+
+    isisRedistributeAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisRedistributeAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "This table provides criteria to decide if a route should
+             be leaked from L2 to L1 when Domain Wide Prefix leaking is
+             enabled.
+
+             Addresses that match the summary mask in the table MUST
+             be announced at L1 by routers when isisSysL2toL1Leaking
+             is enabled.  Routes that fall into the ranges specified
+             are announced as is, without being summarized.  Routes
+             that do not match a summary mask are not announced."
+    ::= { isisSystem 5 }
+
+    isisRedistributeAddrEntry OBJECT-TYPE
+        SYNTAX IsisRedistributeAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one configured IP summary
+             address to manage leaking L2 addresses into L1.
+
+             Dynamically created rows MUST survive an agent reboot.
+
+             Implementers need to be aware that if the total number
+             of elements (octets or sub-identifiers) in
+             isisRedistributeAddrAddress and
+             isisRedistributeAddrPrefixLen is too great, then OIDs
+             of column instances in this table will have more than
+             128 subidentifiers and cannot be accessed using SNMPv1,
+             SNMPv2c, or SNMPv3."
+        INDEX { isisRedistributeAddrType,
+                isisRedistributeAddrAddress,
+                isisRedistributeAddrPrefixLen }
+    ::= { isisRedistributeAddrTable 1 }
+
+    IsisRedistributeAddrEntry ::=
+        SEQUENCE {
+            isisRedistributeAddrType
+                InetAddressType,
+            isisRedistributeAddrAddress
+                InetAddress,
+            isisRedistributeAddrPrefixLen
+                InetAddressPrefixLength,
+            isisRedistributeAddrExistState
+                RowStatus
+        }
+
+    isisRedistributeAddrType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The Type of IP address for this summary address."
+    ::= { isisRedistributeAddrEntry 1 }
+
+    isisRedistributeAddrAddress OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The IP Address value for this summary address.
+             The type of this address is determined by the
+             value of the isisRedistributeAddrType object.
+             The address must not contain any set host bits -
+             bits set after the address prefix determined by
+             isisRedistributeAddrPrefixLen."
+    ::= { isisRedistributeAddrEntry 2 }
+
+    isisRedistributeAddrPrefixLen OBJECT-TYPE
+        SYNTAX InetAddressPrefixLength
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The Length of the IP NetMask for this summary address.
+
+             The values for the index objects
+             isisRedistributeAddrAddress and
+             isisRedistributeAddrPrefixLen must be consistent.
+             When the value of isisRedistributeAddrAddress
+             (excluding the zone index, if one is present) is x,
+             then the bitwise logical-AND of x with the value of
+             the mask formed from the corresponding index object
+             isisRedistributeAddrPrefixLen MUST be equal to x.
+             If not, then the index pair is not consistent, and an
+             inconsistentName error must be returned on SET or
+             CREATE requests."
+    ::= { isisRedistributeAddrEntry 3 }
+
+    isisRedistributeAddrExistState OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The existence state of this summary address.  Support
+
+             for createAndWait and notInService is not required.
+
+             A row entry cannot be modified when the value of this
+             object is 'active'."
+    ::= { isisRedistributeAddrEntry 4 }
+
+-- The Router Table keeps track of hostnames and router IDs
+-- associated with Intermediate Systems in the area and domain.
+
+    isisRouterTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisRouterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The set of hostnames and router ID."
+    ::= { isisSystem 6 }
+
+    isisRouterEntry OBJECT-TYPE
+        SYNTAX IsisRouterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry tracks information about one Intermediate
+             System at one level.
+
+             Dynamically learned rows do not survive an agent reboot."
+        INDEX { isisRouterSysID,
+                isisRouterLevel }
+    ::= { isisRouterTable 1 }
+
+    IsisRouterEntry ::=
+        SEQUENCE {
+            isisRouterSysID
+                IsisSystemID,
+            isisRouterLevel
+                IsisISLevel,
+            isisRouterHostName
+                SnmpAdminString,
+            isisRouterID
+                Unsigned32
+        }
+
+    isisRouterSysID OBJECT-TYPE
+        SYNTAX IsisSystemID
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The System ID of the Intermediate System."
+    ::= { isisRouterEntry 1 }
+
+    isisRouterLevel OBJECT-TYPE
+        SYNTAX IsisISLevel
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The level at which the information about this
+             Intermediate System was received."
+    ::= { isisRouterEntry 2 }
+
+    isisRouterHostName OBJECT-TYPE
+        SYNTAX SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The hostname listed in the LSP, or a zero-length
+             string if none."
+    ::= { isisRouterEntry 3 }
+
+    isisRouterID OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The Router ID found in the LSP, or zero if none."
+    ::= { isisRouterEntry 4 }
+
+-- The System Level Table
+-- This table captures level-specific information about the system
+
+    isisSysLevelTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisSysLevelEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Level specific information about the System."
+    ::= { isisSysLevel 1 }
+
+    isisSysLevelEntry OBJECT-TYPE
+        SYNTAX IsisSysLevelEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each row describes variables configured for Area or Domain.
+
+             Configured values MUST survive an agent reboot."
+        INDEX { isisSysLevelIndex }
+    ::= { isisSysLevelTable 1 }
+
+    IsisSysLevelEntry ::=
+        SEQUENCE {
+            isisSysLevelIndex
+                IsisISLevel,
+            isisSysLevelOrigLSPBuffSize
+                IsisLSPBuffSize,
+            isisSysLevelMinLSPGenInt
+                IsisUnsigned16TC,
+            isisSysLevelState
+                IsisLevelState,
+            isisSysLevelSetOverload
+                TruthValue,
+            isisSysLevelSetOverloadUntil
+                Unsigned32,
+            isisSysLevelMetricStyle
+                IsisMetricStyle,
+            isisSysLevelSPFConsiders
+                IsisMetricStyle,
+            isisSysLevelTEEnabled
+                TruthValue
+        }
+
+    isisSysLevelIndex OBJECT-TYPE
+        SYNTAX IsisISLevel
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The level that this entry describes."
+    ::= { isisSysLevelEntry 1 }
+
+    isisSysLevelOrigLSPBuffSize OBJECT-TYPE
+        SYNTAX IsisLSPBuffSize
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The maximum size of LSPs and SNPs originated by
+             this Intermediate System at this level.  This
+             object may not be modified when the isisSysAdminState
+             variable is in state 'on' for this Intermediate System."
+        REFERENCE "{ISIS.aoi originatingL1LSPBufferSize (9)}"
+        DEFVAL { 1492 }
+    ::= { isisSysLevelEntry 2 }
+
+    isisSysLevelMinLSPGenInt OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (1..65535)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Minimum interval, in seconds, between successive
+             generation of LSPs with the same LSPID at this level
+             by this Intermediate System."
+        REFERENCE "{ISIS.aoi minimumLSPGenerationInterval (11)}"
+        DEFVAL { 30 }
+    ::= { isisSysLevelEntry 3 }
+
+    isisSysLevelState OBJECT-TYPE
+        SYNTAX IsisLevelState
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The state of the database at this level.
+             The value 'off' indicates that IS-IS is not active at
+             this level.
+             The value 'on' indicates that IS-IS is active at this
+             level and is not overloaded.
+             The value 'waiting' indicates a database that is low on
+             an essential resource, such as memory.
+             The administrator may force the state to 'overloaded'
+             by setting the object isisSysLevelSetOverload.
+             If the state is 'waiting' or 'overloaded', we
+             originate LSPs with the overload bit set."
+        REFERENCE "{ISIS.aoi l1State (17)}"
+    ::= { isisSysLevelEntry 4 }
+
+    isisSysLevelSetOverload OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Administratively set the overload bit for the level.
+             The overload bit MUST continue to be set if the
+             implementation runs out of memory, independent of
+             this variable.  It may also be set manually independent
+             of this variable, using the isisSysLevelSetOverloadUntil
+             object."
+        DEFVAL { false }
+    ::= { isisSysLevelEntry 5 }
+
+    isisSysLevelSetOverloadUntil OBJECT-TYPE
+        SYNTAX Unsigned32
+        UNITS "Seconds until clearing manually set Overload Bit"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "If this object is non-zero, the overload bit is set at
+             this level when the isisSysAdminState variable goes to
+             state 'on' for this Intermediate System.  The overload bit
+             remains set for isisSysLevelSetOverloadUntil seconds.
+             When isisSysLevelSetOverloadUntil seconds have elapsed,
+             the overload flag remains set if the implementation has
+             run out of memory, or if it is set manually using the
+             isisSysLevelSetOverload object.
+
+             If isisSysLevelSetOverload is false, the system clears
+             the overload bit when isisSysLevelSetOverloadUntil seconds
+             have elapsed, if the system has not run out of memory."
+    ::= { isisSysLevelEntry 6 }
+
+    isisSysLevelMetricStyle OBJECT-TYPE
+        SYNTAX IsisMetricStyle
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Which style of metric do we generate in our LSPs
+             at this level?"
+        DEFVAL { narrow }
+    ::= { isisSysLevelEntry 7 }
+
+    isisSysLevelSPFConsiders OBJECT-TYPE
+        SYNTAX IsisMetricStyle
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Which style of metric do we consider in our
+             SPF computation at this level?"
+        DEFVAL { narrow }
+    ::= { isisSysLevelEntry 8 }
+
+    isisSysLevelTEEnabled OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Do we do Traffic Engineering at this level?"
+        DEFVAL { false }
+    ::= { isisSysLevelEntry 9 }
+
+-- Static to provide next CircIndex
+
+    isisNextCircIndex OBJECT-TYPE
+        SYNTAX IndexIntegerNextFree
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "This object is used to assist a management
+             application in creating new rows in the
+             isisCircTable.  If it is possible to create
+             a new instance of isisCircEntry, then this
+             object will contain a non-zero value that
+             is not in use as the index of any row in the
+             isisCircTable.  The network manager reads the
+             value of this object and then (if the
+             value read is non-zero) attempts to create
+             the corresponding instance of isisCircEntry.
+             If the set request fails with the code
+             'inconsistentValue', then the process must be
+             repeated;  if the set request succeeds, then
+             the agent will change the value of this object
+             according to an implementation-specific
+             algorithm."
+    ::= { isisCirc  1 }
+
+-- The Circuit Table
+-- Each broadcast or point-to-point interface on the system
+-- corresponds to one entry in the Circuit table.  However, there
+-- may be multiple X.25 DA circuit entries in the Circuit table
+-- for a given X.25 interface.
+
+    isisCircTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisCircEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table of circuits used by this
+             Intermediate System."
+    ::= { isisCirc 2 }
+
+    isisCircEntry OBJECT-TYPE
+        SYNTAX IsisCircEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An isisCircEntry exists for each circuit configured
+             for Integrated IS-IS on this system.
+
+             Dynamically created rows MUST survive an agent reboot."
+        INDEX { isisCircIndex }
+    ::= { isisCircTable 1 }
+
+    IsisCircEntry ::=
+        SEQUENCE {
+            isisCircIndex
+                IndexInteger,
+            isisCircIfIndex
+                InterfaceIndex,
+            isisCircAdminState
+                IsisAdminState,
+            isisCircExistState
+                RowStatus,
+            isisCircType
+                INTEGER,
+            isisCircExtDomain
+                TruthValue,
+            isisCircLevelType
+                IsisLevel,
+            isisCircPassiveCircuit
+                TruthValue,
+            isisCircMeshGroupEnabled
+                INTEGER,
+            isisCircMeshGroup
+                Unsigned32,
+            isisCircSmallHellos
+                TruthValue,
+            isisCircLastUpTime
+                TimeStamp,
+            isisCirc3WayEnabled
+                TruthValue,
+            isisCircExtendedCircID
+                Unsigned32
+        }
+
+    isisCircIndex OBJECT-TYPE
+        SYNTAX IndexInteger
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An index used to uniquely identify this circuit.
+             When creating a row in this table, the
+             isisNextCircIndex object should be retrieved,
+             and its value should be specified as the value
+             of this index using a SET operation.  A retrieved
+             value of zero(0) indicates that no rows can be
+             created at this time."
+    ::= { isisCircEntry 1 }
+
+    isisCircIfIndex OBJECT-TYPE
+        SYNTAX InterfaceIndex
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The value of ifIndex for the interface to which this
+             circuit corresponds.  This object cannot be modified
+             after creation."
+    ::= { isisCircEntry 2 }
+
+    isisCircAdminState OBJECT-TYPE
+        SYNTAX IsisAdminState
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The administrative state of the circuit."
+        DEFVAL { off }
+    ::= { isisCircEntry 3 }
+
+    isisCircExistState OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The existence state of this circuit.  Setting the state
+             to 'notInService' halts the generation and processing of
+             IS-IS protocol PDUs on this circuit.  Setting the state
+             to destroy will also erase any configuration associated
+             with the circuit.  Support for 'createAndWait' and
+             'notInService' is not required.
+
+             A row entry cannot be modified when the value of this
+             object is 'active'."
+    ::= { isisCircEntry 4 }
+
+    isisCircType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                broadcast(1),
+                ptToPt(2),
+                staticIn(3),
+                staticOut(4),
+                dA(5)
+            }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The type of the circuit.  This object follows the
+             ReplaceOnlyWhileDisabled behavior.  The type specified
+             must be compatible with the type of the interface defined
+
+             by the value of isisCircIfIndex."
+        REFERENCE "{ISIS.aoi type (33)}"
+    ::= { isisCircEntry 5 }
+
+    isisCircExtDomain OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "If true, suppress normal transmission of and
+             interpretation of Intra-domain IS-IS PDUs on this
+             circuit."
+        REFERENCE "{ISIS.aoi externalDomain (46)}"
+        DEFVAL { false }
+    ::= { isisCircEntry 6 }
+
+    isisCircLevelType OBJECT-TYPE
+        SYNTAX IsisLevel
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Indicates which type of packets will be sent and
+             accepted on this circuit.  The values set will be
+             saved, but the values used will be modified by
+             the settings of isisSysLevelType.  Thus, if the
+             isisSysTpe is level2 and the isisCircLevelType
+             for a circuit is level1, the circuit will not send
+             or receive IS-IS packets.  This object follows the
+             ReplaceOnlyWhileDisabled behavior."
+        DEFVAL { level1and2 }
+    ::= { isisCircEntry 7 }
+
+    isisCircPassiveCircuit OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Should we include this interface in LSPs, even if
+             it is not running the IS-IS Protocol?"
+        DEFVAL { false }
+    ::= { isisCircEntry 8 }
+
+    isisCircMeshGroupEnabled OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                inactive(1),
+                blocked(2),
+                set(3)
+
+            }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Is this port a member of a mesh group, or is it
+             blocked?  Circuits in the same mesh group act as a
+             virtual multiaccess network.  LSPs seen on one circuit
+             in a mesh group will not be flooded to another circuit
+             in the same mesh group."
+        REFERENCE "{ RFC 2973 }"
+        DEFVAL { inactive }
+    ::= { isisCircEntry 9 }
+
+    isisCircMeshGroup OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Circuits in the same mesh group act as a virtual
+             multiaccess network.  LSPs seen on one circuit in
+             a mesh group will not be flooded to another circuit
+             in the same mesh group.  If isisCircMeshGroupEnabled
+             is inactive or blocked, this value is ignored."
+        REFERENCE "{ RFC 2973 }"
+    ::= { isisCircEntry 10 }
+
+    isisCircSmallHellos OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Can we send unpadded hellos on LAN circuits?  False
+             means the LAN Hellos must be padded.
+             Implementations should allow the administrator to read
+             this value.  An implementation need not be able to
+             support unpadded hellos to be conformant."
+         DEFVAL { false }
+    ::= { isisCircEntry 11 }
+
+    isisCircLastUpTime OBJECT-TYPE
+        SYNTAX TimeStamp
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "How long the circuit has been enabled, measured in
+             hundredths of seconds since the last re-initialization
+             of the network management subsystem; 0 if the
+             circuit has never been 'on'."
+    ::= { isisCircEntry 12 }
+
+    isisCirc3WayEnabled OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Is this circuit enabled to run 3Way handshake?"
+        DEFVAL { true }
+    ::= { isisCircEntry 13 }
+
+    isisCircExtendedCircID OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The value to be used as the extended circuit ID in
+             3Way handshake.  This value is only used if
+             isisCirc3WayEnabled is true, and it must be unique
+             across all circuits on this IS."
+    ::= { isisCircEntry 14 }
+
+-- The Circuit Level Table
+-- This table captures level-specific information about a circuit
+
+    isisCircLevelTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisCircLevelEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Level specific information about circuits used by IS-IS."
+    ::= { isisCircLevelValues 1 }
+
+    isisCircLevelEntry OBJECT-TYPE
+        SYNTAX IsisCircLevelEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An isisCircLevelEntry exists for each level on
+             each circuit configured for Integrated IS-IS on
+             this system.
+
+             Configured values MUST survive an agent reboot."
+        INDEX { isisCircIndex,
+                isisCircLevelIndex }
+    ::= { isisCircLevelTable 1 }
+
+    IsisCircLevelEntry ::=
+
+        SEQUENCE {
+            isisCircLevelIndex
+                IsisISLevel,
+            isisCircLevelMetric
+                IsisDefaultMetric,
+            isisCircLevelWideMetric
+                IsisWideMetric,
+            isisCircLevelISPriority
+                IsisISPriority,
+            isisCircLevelIDOctet
+                Unsigned32,
+            isisCircLevelID
+                IsisCircuitID,
+            isisCircLevelDesIS
+                IsisCircuitID,
+            isisCircLevelHelloMultiplier
+                Unsigned32,
+            isisCircLevelHelloTimer
+                Unsigned32,
+            isisCircLevelDRHelloTimer
+                Unsigned32,
+            isisCircLevelLSPThrottle
+                IsisUnsigned16TC,
+            isisCircLevelMinLSPRetransInt
+                Unsigned32,
+            isisCircLevelCSNPInterval
+                Unsigned32,
+            isisCircLevelPartSNPInterval
+                Unsigned32
+        }
+
+    isisCircLevelIndex OBJECT-TYPE
+        SYNTAX IsisISLevel
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The level that this entry describes."
+    ::= { isisCircLevelEntry 1 }
+
+    isisCircLevelMetric OBJECT-TYPE
+        SYNTAX IsisDefaultMetric
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The metric value of this circuit for this level."
+        REFERENCE "{ISIS.aoi l1DefaultMetric (35)}"
+        DEFVAL { 10 }
+    ::= { isisCircLevelEntry 2 }
+
+    isisCircLevelWideMetric OBJECT-TYPE
+        SYNTAX IsisWideMetric
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The wide metric value of this circuit for this level."
+        DEFVAL { 10 }
+    ::= { isisCircLevelEntry 3 }
+
+    isisCircLevelISPriority OBJECT-TYPE
+        SYNTAX IsisISPriority
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The priority for becoming the LAN-Designated
+             Intermediate System at this level."
+        REFERENCE "{ISIS.aoi l2IntermediateSystemPriority (73)}"
+        DEFVAL { 64 }
+    ::= { isisCircLevelEntry 4 }
+
+    isisCircLevelIDOctet OBJECT-TYPE
+        SYNTAX Unsigned32(0..255)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "A one-byte identifier for the circuit selected by the
+             Intermediate System.
+
+             On point-to-point circuits, the value is used as the Local
+             Circuit ID in point-to-point IIH PDUs transmitted on this
+             circuit.  In this case, values of isisCircLevelIDOctet do
+             not need to be unique.
+
+             For broadcast circuits, the value is used to generate the
+             LAN ID that will be used if this Intermediate System is
+             elected as the Designated IS on this circuit.  The value
+             is required to differ on LANs where the Intermediate System
+             is the Designated Intermediate System."
+    ::= { isisCircLevelEntry 5 }
+
+    isisCircLevelID OBJECT-TYPE
+        SYNTAX IsisCircuitID
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "On a point-to-point circuit with a fully initialized
+             adjacency to a peer IS, the value of this object is
+             the circuit ID negotiated during adjacency initialization.
+
+             On a point to point circuit without such an adjacency,
+             the value is the concatenation of the local system ID
+             and the one-byte isisCircLevelIDOctet for this circuit,
+             i.e., the value that would be proposed for the circuit ID.
+             On other circuit types, the value returned is the zero-
+             length OCTET STRING."
+        REFERENCE "{ISIS.aoi ptPtCircuitID (51)}"
+    ::= { isisCircLevelEntry 6 }
+
+    isisCircLevelDesIS OBJECT-TYPE
+        SYNTAX IsisCircuitID
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The ID of the LAN-Designated Intermediate System
+             on this circuit at this level.  If, for any reason,
+             this system is not partaking in the relevant
+             Designated Intermediate System election process,
+             then the value returned is the zero-length OCTET STRING."
+        REFERENCE "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
+    ::= { isisCircLevelEntry 7 }
+
+    isisCircLevelHelloMultiplier OBJECT-TYPE
+        SYNTAX Unsigned32 (2..100)
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "This value is multiplied by the corresponding HelloTimer,
+             and the result in seconds (rounded up) is used as the
+             holding time in transmitted hellos, to be used by
+             receivers of hello packets from this IS."
+        REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
+        DEFVAL { 10 }
+    ::= { isisCircLevelEntry 8 }
+
+    isisCircLevelHelloTimer OBJECT-TYPE
+        SYNTAX Unsigned32 (10..600000)
+        UNITS "milliseconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Maximum period, in milliseconds, between IIH PDUs
+             on multiaccess networks at this level for LANs.
+             The value at L1 is used as the period between
+             Hellos on L1L2 point-to-point circuits.  Setting
+             this value at level 2 on an L1L2 point-to-point
+             circuit will result in an error of InconsistentValue.
+
+             This object follows the ResettingTimer behavior."
+        REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
+        DEFVAL { 3000 }
+    ::= { isisCircLevelEntry 9 }
+
+    isisCircLevelDRHelloTimer OBJECT-TYPE
+        SYNTAX Unsigned32 (10..120000)
+        UNITS "milliseconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Period, in milliseconds, between Hello PDUs on
+             multiaccess networks when this IS is the Designated
+             Intermediate System.  This object follows the
+             ResettingTimer behavior."
+        REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
+        DEFVAL { 1000 }
+    ::= { isisCircLevelEntry 10 }
+
+    isisCircLevelLSPThrottle OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (1..65535)
+        UNITS "milliseconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Minimal interval of time, in milliseconds, between
+             transmissions of LSPs on an interface at this level."
+        REFERENCE
+            "{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
+        DEFVAL { 30 }
+    ::= { isisCircLevelEntry 11 }
+
+    isisCircLevelMinLSPRetransInt OBJECT-TYPE
+        SYNTAX Unsigned32 (1..300)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Minimum interval, in seconds, between re-transmission of
+             an LSP at this level.  This object follows the
+             ResettingTimer behavior.
+
+             Note that isisCircLevelLSPThrottle controls
+             how fast we send back-to-back LSPs.  This variable
+             controls how fast we re-send the same LSP."
+        REFERENCE "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
+        DEFVAL { 5 }
+    ::= { isisCircLevelEntry 12 }
+
+    isisCircLevelCSNPInterval OBJECT-TYPE
+        SYNTAX Unsigned32 (1..600)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Interval of time, in seconds, between periodic
+             transmission of a complete set of CSNPs on
+             multiaccess networks if this router is the
+             designated router at this level.
+             This object follows the ResettingTimer behavior."
+        REFERENCE "{ISIS.aoi completeSNPInterval (8)}"
+        DEFVAL { 10 }
+    ::= { isisCircLevelEntry 13 }
+
+    isisCircLevelPartSNPInterval OBJECT-TYPE
+        SYNTAX Unsigned32 (1..120)
+        UNITS "seconds"
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "Minimum interval, in seconds, between sending Partial
+             Sequence Number PDUs at this level.  This object
+             follows the ResettingTimer behavior."
+        REFERENCE "{ISIS.aoi partialSNPInterval (14)}"
+        DEFVAL { 2 }
+    ::= { isisCircLevelEntry 14 }
+
+-- isisSystemCounterTable keeps track of system-wide events.
+
+    isisSystemCounterTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisSystemCounterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "System-wide counters for this Intermediate System."
+    ::= { isisCounters 1 }
+
+    isisSystemCounterEntry OBJECT-TYPE
+        SYNTAX IsisSystemCounterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "System-wide IS-IS counters."
+        INDEX { isisSysStatLevel }
+    ::= { isisSystemCounterTable 1 }
+
+    IsisSystemCounterEntry ::=
+
+        SEQUENCE {
+            isisSysStatLevel
+                IsisISLevel,
+            isisSysStatCorrLSPs
+                Counter32,
+            isisSysStatAuthTypeFails
+                Counter32,
+            isisSysStatAuthFails
+                Counter32,
+            isisSysStatLSPDbaseOloads
+                Counter32,
+            isisSysStatManAddrDropFromAreas
+                Counter32,
+            isisSysStatAttmptToExMaxSeqNums
+                Counter32,
+            isisSysStatSeqNumSkips
+                Counter32,
+            isisSysStatOwnLSPPurges
+                Counter32,
+            isisSysStatIDFieldLenMismatches
+                Counter32,
+            isisSysStatPartChanges
+                Counter32,
+            isisSysStatSPFRuns
+                Counter32,
+            isisSysStatLSPErrors
+                Counter32
+        }
+
+    isisSysStatLevel OBJECT-TYPE
+        SYNTAX IsisISLevel
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The level that this entry describes."
+    ::= { isisSystemCounterEntry 1 }
+
+    isisSysStatCorrLSPs OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of corrupted in-memory frames"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of corrupted in-memory LSPs detected.
+
+             LSPs received from the wire with a bad checksum
+             are silently dropped and are not counted.
+
+             LSPs received from the wire with parse errors
+             are counted by isisSysStatLSPErrors."
+        REFERENCE "{ISIS.aoi corruptedLSPsDetected (19)}"
+    ::= { isisSystemCounterEntry 2 }
+
+    isisSysStatAuthTypeFails OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of frames with authentication type mismatches"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of authentication type mismatches recognized
+             by this Intermediate System."
+    ::= { isisSystemCounterEntry 3 }
+
+    isisSysStatAuthFails OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of frames with authentication key failures"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of authentication key failures recognized
+             by this Intermediate System."
+    ::= { isisSystemCounterEntry 4 }
+
+    isisSysStatLSPDbaseOloads OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times the LSP database has become
+             overloaded."
+        REFERENCE "{ISIS.aoi lSPL1DatabaseOverloads (20)}"
+    ::= { isisSystemCounterEntry 5 }
+
+    isisSysStatManAddrDropFromAreas OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times a manual address has been dropped from
+             the area."
+        REFERENCE "{ISIS.aoi manualAddressesDroppedFromArea (21)}"
+    ::= { isisSystemCounterEntry 6 }
+
+    isisSysStatAttmptToExMaxSeqNums OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times the IS has attempted to exceed the
+             maximum sequence number."
+        REFERENCE
+            "{ISIS.aoi attemptsToExceedmaximumSequenceNumber (22)}"
+    ::= { isisSystemCounterEntry 7 }
+
+    isisSysStatSeqNumSkips OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times a sequence number skip has occurred."
+        REFERENCE "{ISIS.aoi sequenceNumberSkips (23)}"
+    ::= { isisSystemCounterEntry 8 }
+
+    isisSysStatOwnLSPPurges OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times a zero-aged copy of the system's own LSP
+             is received from some other node."
+        REFERENCE "{ISIS.aoi ownLSPPurges (24)}"
+    ::= { isisSystemCounterEntry 9 }
+
+    isisSysStatIDFieldLenMismatches OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of frames with ID length mismatches"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times a PDU is received with a different value
+             for ID field length from that of the receiving system."
+        REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
+    ::= { isisSystemCounterEntry 10 }
+
+    isisSysStatPartChanges OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Partition changes."
+    ::= { isisSystemCounterEntry 11 }
+
+    isisSysStatSPFRuns OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of times we ran SPF at this level."
+    ::= { isisSystemCounterEntry 12 }
+
+    isisSysStatLSPErrors OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of frames with errors that we have received"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Number of LSPs with errors we have received."
+    ::= { isisSystemCounterEntry 13 }
+
+-- isisCircuitCounterTable keeps track of events
+-- specific to a circuit and a level
+
+    isisCircuitCounterTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisCircuitCounterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Circuit specific counters for this
+             Intermediate System."
+    ::= { isisCounters 2 }
+
+    isisCircuitCounterEntry OBJECT-TYPE
+        SYNTAX IsisCircuitCounterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An isisCircuitCounterEntry exists for each circuit
+             used by Integrated IS-IS on this system."
+        INDEX { isisCircIndex,
+                isisCircuitType }
+    ::= { isisCircuitCounterTable 1 }
+
+    IsisCircuitCounterEntry ::= SEQUENCE {
+          isisCircuitType
+              INTEGER,
+          isisCircAdjChanges
+              Counter32,
+          isisCircNumAdj
+              Unsigned32,
+          isisCircInitFails
+              Counter32,
+          isisCircRejAdjs
+
+              Counter32,
+          isisCircIDFieldLenMismatches
+              Counter32,
+          isisCircMaxAreaAddrMismatches
+              Counter32,
+          isisCircAuthTypeFails
+              Counter32,
+          isisCircAuthFails
+              Counter32,
+          isisCircLANDesISChanges
+              Counter32
+       }
+
+    isisCircuitType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                lanlevel1(1),
+                lanlevel2(2),
+                p2pcircuit(3)
+            }
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "What type of circuit saw these counts?
+
+             The point-to-point Hello PDU includes
+             both L1 and L2, and ISs form a single
+             adjacency on point-to-point links.
+             Thus, we combine counts on
+             point-to-point links into one group."
+    ::= { isisCircuitCounterEntry 1 }
+
+    isisCircAdjChanges OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times an adjacency state change has
+             occurred on this circuit."
+        REFERENCE "{ISIS.aoi changesInAdjacencyState (40)}"
+    ::= { isisCircuitCounterEntry 2 }
+
+    isisCircNumAdj OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of adjacencies on this circuit."
+        REFERENCE "{ISIS.aoi changesInAdjacencyState (40)}"
+    ::= { isisCircuitCounterEntry 3 }
+
+    isisCircInitFails OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times initialization of this circuit has
+             failed.  This counts events such as PPP NCP failures.
+             Failures to form an adjacency are counted by
+             isisCircRejAdjs."
+    ::= { isisCircuitCounterEntry 4 }
+
+    isisCircRejAdjs OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times an adjacency has been rejected on
+             this circuit."
+        REFERENCE "{ISIS.aoi rejectedAdjacencies (42)}"
+    ::= { isisCircuitCounterEntry 5 }
+
+    isisCircIDFieldLenMismatches OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of frames with ID field length mismatch"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times an IS-IS control PDU with an ID
+             field length different from that for this system has been
+             received."
+        REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
+    ::= { isisCircuitCounterEntry 6 }
+
+    isisCircMaxAreaAddrMismatches OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times an IS-IS control PDU with a
+             max area address field different from that for this
+             system has been received."
+        REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
+    ::= { isisCircuitCounterEntry 7 }
+
+    isisCircAuthTypeFails OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times an IS-IS control PDU with
+             an auth type field different from that for this
+             system has been received."
+    ::= { isisCircuitCounterEntry 8 }
+
+    isisCircAuthFails OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times an IS-IS control PDU with
+             the correct auth type has failed to pass authentication
+             validation."
+    ::= { isisCircuitCounterEntry 9 }
+
+    isisCircLANDesISChanges OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of times the Designated IS has changed
+             on this circuit at this level.  If the circuit is
+             point to point, this count is zero."
+    ::= { isisCircuitCounterEntry 10 }
+
+-- isisPacketCounterTable keeps track of the number of IS-IS
+-- control packets sent and received at each level
+
+    isisPacketCounterTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisPacketCounterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Information about IS-IS protocol traffic at one level,
+             on one circuit, in one direction."
+    ::= { isisCounters 3 }
+
+    isisPacketCounterEntry OBJECT-TYPE
+        SYNTAX IsisPacketCounterEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Information about IS-IS protocol traffic at one level,
+             on one circuit, in one direction."
+        INDEX { isisCircIndex,
+                isisPacketCountLevel,
+                isisPacketCountDirection }
+    ::= { isisPacketCounterTable 1 }
+
+    IsisPacketCounterEntry ::=
+        SEQUENCE {
+            isisPacketCountLevel
+                IsisISLevel,
+            isisPacketCountDirection
+                INTEGER,
+            isisPacketCountIIHello
+                Counter32,
+            isisPacketCountISHello
+                Counter32,
+            isisPacketCountESHello
+                Counter32,
+            isisPacketCountLSP
+                Counter32,
+            isisPacketCountCSNP
+                Counter32,
+            isisPacketCountPSNP
+                Counter32,
+            isisPacketCountUnknown
+                Counter32
+    }
+
+    isisPacketCountLevel OBJECT-TYPE
+        SYNTAX IsisISLevel
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The level at which these PDU counts have been collected."
+    ::= { isisPacketCounterEntry 1 }
+
+    isisPacketCountDirection OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                sending(1),
+                receiving(2)
+            }
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Were we sending or receiving these PDUs?"
+    ::= { isisPacketCounterEntry 2 }
+
+    isisPacketCountIIHello OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of IS-IS Hellos frames seen in this direction
+              at this level"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of IS-IS Hello PDUs seen in this
+             direction at this level.
+
+             Point-to-Point IIH PDUs are counted at
+             the lowest enabled level: at L1 on L1 or L1L2 circuits,
+             and at L2 otherwise."
+        REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
+    ::= { isisPacketCounterEntry 3 }
+
+    isisPacketCountISHello OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of ES-IS frames seen in this direction at
+             this level."
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of ES-IS Hello PDUs seen in this
+             direction.  ISH PDUs are counted at the
+             lowest enabled level: at L1 on L1 or L1L2
+             circuits, and at L2 otherwise."
+    ::= { isisPacketCounterEntry 4 }
+
+    isisPacketCountESHello OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of ES Hello frames seen in this direction at
+             this level"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of ES Hello PDUs seen in this
+             direction.  ESH PDUs are counted at the
+             lowest enabled level: at L1 on L1 or L1L2
+             circuits, and at L2 otherwise."
+    ::= { isisPacketCounterEntry 5 }
+
+    isisPacketCountLSP OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of IS-IS LSP frames seen in this direction at
+             this level"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of IS-IS LSPs seen in this
+             direction at this level."
+        REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
+    ::= { isisPacketCounterEntry 6 }
+
+    isisPacketCountCSNP OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of IS-IS CSNP frames seen in this direction at
+             this level"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of IS-IS CSNPs seen in this
+             direction at this level."
+        REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
+    ::= { isisPacketCounterEntry 7 }
+
+    isisPacketCountPSNP OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of IS-IS PSNP frames seen in this direction at
+             this level"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of IS-IS PSNPs seen in this
+             direction at this level."
+        REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
+    ::= { isisPacketCounterEntry 8 }
+
+    isisPacketCountUnknown OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "Number of unknown IS-IS frames seen at this level"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The number of unknown IS-IS PDUs seen
+             at this level."
+        REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
+    ::= { isisPacketCounterEntry 9 }
+
+-- The IS Adjacency Table
+--
+-- Each adjacency to an IS corresponds to one entry in this
+-- table.
+
+    isisISAdjTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisISAdjEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table of adjacencies to Intermediate Systems."
+    ::= { isisISAdj 1 }
+
+    isisISAdjEntry OBJECT-TYPE
+        SYNTAX IsisISAdjEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry corresponds to one adjacency to an
+             Intermediate System on this system.
+
+             Dynamically learned rows do not survive an agent reboot."
+        INDEX { isisCircIndex,
+                isisISAdjIndex }
+    ::= { isisISAdjTable 1 }
+
+    IsisISAdjEntry ::=
+        SEQUENCE {
+            isisISAdjIndex
+                Unsigned32,
+            isisISAdjState
+                INTEGER,
+            isisISAdj3WayState
+                INTEGER,
+            isisISAdjNeighSNPAAddress
+                IsisOSINSAddress,
+            isisISAdjNeighSysType
+                INTEGER,
+            isisISAdjNeighSysID
+                IsisSystemID,
+            isisISAdjNbrExtendedCircID
+                Unsigned32,
+            isisISAdjUsage
+                IsisLevel,
+            isisISAdjHoldTimer
+                IsisUnsigned16TC,
+            isisISAdjNeighPriority
+                IsisISPriority,
+            isisISAdjLastUpTime
+                TimeStamp
+      }
+
+    isisISAdjIndex OBJECT-TYPE
+        SYNTAX Unsigned32(1..4294967295)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "A unique value identifying the IS adjacency from all
+             other such adjacencies on this circuit.  This value is
+             automatically assigned by the system when the adjacency
+             is created."
+    ::= { isisISAdjEntry 1 }
+
+    isisISAdjState OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                 down (1),
+                 initializing (2),
+                 up (3),
+                 failed(4)
+            }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The state of the adjacency."
+        REFERENCE "{ISIS.aoi adjacencyState (78)}"
+    ::= { isisISAdjEntry 2 }
+
+    isisISAdj3WayState OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                 up (0),
+                 initializing (1),
+                 down (2),
+                 failed (3)
+            }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The 3Way state of the adjacency.  These are picked
+             to match the historical on-the-wire representation
+             of the 3Way state and are not intended to match
+             isisISAdjState."
+        REFERENCE "{ RFC 3373 }"
+    ::= { isisISAdjEntry 3 }
+
+    isisISAdjNeighSNPAAddress OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The SNPA address of the neighboring system."
+        REFERENCE "{ISIS.aoi neighbourSNPAAddress (79)}"
+    ::= { isisISAdjEntry 4 }
+
+    isisISAdjNeighSysType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                l1IntermediateSystem(1),
+                l2IntermediateSystem(2),
+                l1L2IntermediateSystem(3),
+                unknown(4)
+            }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The type of the neighboring system."
+        REFERENCE "{ISIS.aoi neighbourSystemType (80)}"
+    ::= { isisISAdjEntry 5 }
+
+    isisISAdjNeighSysID OBJECT-TYPE
+        SYNTAX IsisSystemID
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The system ID of the neighboring Intermediate
+             System."
+        REFERENCE "{ISIS.aoi neighbourSystemIds (83)}"
+    ::= { isisISAdjEntry 6 }
+
+    isisISAdjNbrExtendedCircID OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The 4-byte Extended Circuit ID learned from the
+             Neighbor during 3-way handshake, or 0."
+    ::= { isisISAdjEntry 7 }
+
+    isisISAdjUsage OBJECT-TYPE
+        SYNTAX IsisLevel
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "How is the adjacency used?  On a point-to-point link,
+             this might be level1and2, but on a LAN, the usage will
+             be level1 on the adjacency between peers at L1,
+             and level2 for the adjacency between peers at L2."
+        REFERENCE "{ISIS.aoi adjacencyUsage (82)}"
+    ::= { isisISAdjEntry 8 }
+
+    isisISAdjHoldTimer OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (1..65535)
+        UNITS "seconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The holding time, in seconds, for this adjacency.
+             This value is based on received IIH PDUs and
+             the elapsed time since receipt."
+        REFERENCE "{ISIS.aoi holdingTimer (85)}"
+    ::= { isisISAdjEntry 9 }
+
+    isisISAdjNeighPriority OBJECT-TYPE
+        SYNTAX IsisISPriority
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Priority of the neighboring Intermediate System for
+             becoming the Designated Intermediate System."
+        REFERENCE "{ISIS.aoi lANPriority (86)}"
+    ::= { isisISAdjEntry 10 }
+
+    isisISAdjLastUpTime OBJECT-TYPE
+        SYNTAX TimeStamp
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "When the adjacency most recently entered the state 'up',
+             measured in hundredths of a second since the last
+             re-initialization of the network management subsystem.
+             Holds 0 if the adjacency has never been in state 'up'."
+    ::= { isisISAdjEntry 11 }
+
+-- The IS Adjacency Area Address Table
+
+-- The IS Adjacency Area Address Table contains the set of
+-- Area Addresses of neighboring
+-- Intermediate Systems as reported in IIH PDUs.
+
+    isisISAdjAreaAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisISAdjAreaAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "This table contains the set of Area Addresses of
+             neighboring Intermediate Systems as reported in received
+             IIH PDUs."
+        REFERENCE "{ISIS.aoi areaAddressesOfNeighbour (84)}"
+    ::= { isisISAdj 2 }
+
+    isisISAdjAreaAddrEntry OBJECT-TYPE
+        SYNTAX IsisISAdjAreaAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one Area Address reported by a
+             neighboring Intermediate System in its IIH PDUs.
+
+             Dynamically learned rows do not survive an agent reboot."
+        INDEX { isisCircIndex,
+                isisISAdjIndex,
+                isisISAdjAreaAddrIndex }
+    ::= { isisISAdjAreaAddrTable 1 }
+
+    IsisISAdjAreaAddrEntry ::=
+        SEQUENCE {
+            isisISAdjAreaAddrIndex
+                Unsigned32,
+            isisISAdjAreaAddress
+                IsisOSINSAddress
+            }
+
+    isisISAdjAreaAddrIndex OBJECT-TYPE
+        SYNTAX Unsigned32(1..4294967295)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An index for the areas associated with one neighbor.
+             This provides a simple way to walk the table."
+    ::= { isisISAdjAreaAddrEntry 1 }
+
+    isisISAdjAreaAddress OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "One Area Address as reported in IIH PDUs received from
+             the neighbor."
+    ::= { isisISAdjAreaAddrEntry 2 }
+
+-- The IS Adjacency IP Address Table
+
+-- The IS Adjacency IP Address Table contains the
+-- set of IP Addresses of neighboring Intermediate Systems
+-- as reported in received IIH PDUs.
+
+    isisISAdjIPAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisISAdjIPAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "This table contains the set of IP Addresses of
+             neighboring Intermediate Systems as reported in received
+             IIH PDUs."
+    ::= { isisISAdj 3 }
+
+    isisISAdjIPAddrEntry OBJECT-TYPE
+        SYNTAX IsisISAdjIPAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one IP Address reported by a
+             neighboring Intermediate System in its IIH PDUs.
+
+             Dynamically learned rows do not survive an agent reboot."
+        INDEX { isisCircIndex,
+                isisISAdjIndex,
+                isisISAdjIPAddrIndex
+                }
+    ::= { isisISAdjIPAddrTable 1 }
+
+    IsisISAdjIPAddrEntry ::=
+        SEQUENCE {
+            isisISAdjIPAddrIndex
+                Unsigned32,
+            isisISAdjIPAddrType
+                 InetAddressType,
+            isisISAdjIPAddrAddress
+                InetAddress
+        }
+
+    isisISAdjIPAddrIndex OBJECT-TYPE
+        SYNTAX Unsigned32(1..4294967295)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An index to this table that identifies the IP addresses
+             to which this entry belongs."
+    ::= { isisISAdjIPAddrEntry 1 }
+
+    isisISAdjIPAddrType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The type of one IP Address as reported in IIH PDUs
+
+             received from the neighbor."
+    ::= { isisISAdjIPAddrEntry 2 }
+
+    isisISAdjIPAddrAddress OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "One IP Address as reported in IIH PDUs received from the
+             neighbor.
+
+             The type of this address is determined by the value of
+             the isisISAdjIPAddrType object."
+    ::= { isisISAdjIPAddrEntry 3 }
+
+-- The IS Adjacency Protocol Supported Table
+--
+-- The IS Adjacency Protocol Supported Table contains the set of
+-- protocols supported by neighboring
+-- Intermediate Systems as reported in received IIH PDUs.
+
+    isisISAdjProtSuppTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisISAdjProtSuppEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "This table contains the set of protocols supported by
+             neighboring Intermediate Systems as reported in received
+             IIH PDUs."
+    ::= { isisISAdj 4 }
+
+    isisISAdjProtSuppEntry OBJECT-TYPE
+        SYNTAX IsisISAdjProtSuppEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains one protocol supported by a
+             neighboring Intermediate System as reported in its IIH
+             PDUs.
+
+             Dynamically learned rows do not survive an agent reboot."
+        INDEX {  isisCircIndex,
+                 isisISAdjIndex,
+                 isisISAdjProtSuppProtocol }
+    ::= { isisISAdjProtSuppTable 1 }
+
+    IsisISAdjProtSuppEntry ::=
+        SEQUENCE {
+
+            isisISAdjProtSuppProtocol
+                IsisSupportedProtocol
+        }
+
+    isisISAdjProtSuppProtocol OBJECT-TYPE
+        SYNTAX IsisSupportedProtocol
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "One supported protocol as reported in IIH PDUs received
+             from the neighbor."
+    ::= { isisISAdjProtSuppEntry 1 }
+
+-- The Reachable Address Group
+--
+-- The Reachable Address Table
+-- Each entry records information about a reachable address
+-- (NSAP or address prefix) manually configured on the system
+-- or learned through another protocol.
+
+    isisRATable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisRAEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table of Reachable Addresses to NSAPs or Address
+             Prefixes."
+    ::= { isisReachAddr 1 }
+
+    isisRAEntry OBJECT-TYPE
+        SYNTAX IsisRAEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry defines a configured Reachable Address
+             to an NSAP or Address Prefix.
+
+             Dynamically created rows MUST survive an agent reboot."
+        INDEX { isisCircIndex,
+                isisRAIndex }
+    ::= { isisRATable 1 }
+
+    IsisRAEntry ::=
+        SEQUENCE {
+            isisRAIndex
+                Unsigned32,
+            isisRAExistState
+                RowStatus,
+            isisRAAdminState
+                IsisAdminState,
+            isisRAAddrPrefix
+                IsisOSINSAddress,
+            isisRAMapType
+                INTEGER,
+            isisRAMetric
+                IsisDefaultMetric,
+            isisRAMetricType
+                IsisMetricType,
+            isisRASNPAAddress
+                IsisOSINSAddress,
+            isisRASNPAMask
+                IsisOSINSAddress,
+            isisRASNPAPrefix
+                IsisOSINSAddress,
+            isisRAType
+                INTEGER
+        }
+
+    isisRAIndex OBJECT-TYPE
+        SYNTAX Unsigned32(1..4294967295)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The identifier for this isisRAEntry.  This value must be
+             unique amongst all Reachable Addresses on the same parent
+             Circuit."
+    ::= { isisRAEntry 1 }
+
+    isisRAExistState OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The existence state of this Reachable Address.  This
+             object follows the ManualOrAutomatic behaviors.  Support
+             for 'createAndWait' and 'notInService' is not required.
+
+             A row entry cannot be modified when the value of this
+             object is 'active'."
+    ::= { isisRAEntry 2 }
+
+    isisRAAdminState OBJECT-TYPE
+        SYNTAX IsisAdminState
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The administrative state of the Reachable Address.  This
+             object follows the ManualOrAutomatic behaviors."
+        DEFVAL { off }
+    ::= { isisRAEntry 3 }
+
+    isisRAAddrPrefix OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The destination of this Reachable Address.  This is an
+             Address Prefix.  This object follows the
+             ReplaceOnlyWhileDisabled and ManualOrAutomatic
+             behaviors."
+        REFERENCE "{ISIS.aoi addressPrefix (98)}"
+    ::= { isisRAEntry 4 }
+
+    isisRAMapType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                none (1),
+                explicit (2),
+                extractIDI (3),
+                extractDSP (4)
+            }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The type of mapping to be employed to ascertain the SNPA
+             Address that should be used in forwarding PDUs for this
+             Reachable Address prefix.  This object follows the
+             ManualOrAutomatic behavior.  The following values of
+             mapping type are defined:
+
+                 none: The mapping is null because the neighbor SNPA is
+                       implicit by nature of the subnetwork (e.g., a
+                       point-to-point linkage).
+
+                 explicit: The subnetwork addresses in the object
+                       isisRASNPAAddress are to be used.
+
+                 extractIDI: The SNPA is embedded in the IDI of
+                       the destination NSAP Address.  The mapping
+                       algorithm extracts the SNPA to be used
+                       according to the format and encoding rules of
+                       ISO8473/Add2.  This SNPA extraction algorithm can
+                       be used in conjunction with Reachable Address
+                       prefixes from the X.121, F.69, E.163, and E.164
+
+                       addressing subdomains.
+
+                 extractDSP: All, or a suffix, of the SNPA is embedded
+                       in the DSP of the destination address.  This SNPA
+                       extraction algorithm extracts the embedded
+                       subnetwork addressing information by performing a
+                       logical AND of the isisRASNPAMask object value
+                       with the destination address.  The part of the
+                       SNPA extracted from the destination NSAP is
+                       appended to the isisRASNPAPrefix object value to
+                       form the next hop subnetwork addressing
+                       information."
+        REFERENCE "{ISO10589-ISIS.aoi mappingType (107)}"
+    ::= { isisRAEntry 5 }
+
+    isisRAMetric OBJECT-TYPE
+        SYNTAX IsisDefaultMetric
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The metric value for reaching the specified
+             prefix over this circuit.  This object follows the
+             ManualOrAutomatic behavior."
+        REFERENCE "{ISIS.aoi DefaultMetric (99)}"
+        DEFVAL { 20 }
+    ::= { isisRAEntry 6 }
+
+    isisRAMetricType OBJECT-TYPE
+        SYNTAX IsisMetricType
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Indicates whether the metric is internal or
+             external.  This object follows the ManualOrAutomatic
+             behavior."
+        REFERENCE "{ISIS.aoi DefaultMetricType (103)}"
+        DEFVAL { internal }
+    ::= { isisRAEntry 7 }
+
+    isisRASNPAAddress OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The SNPA Address to which a PDU may be forwarded in
+             order to reach a destination that matches the address
+             prefix of the Reachable Address.  This object follows the
+
+             ManualOrAutomatic behavior."
+        REFERENCE "{ISIS.aoi sNPAAddresses (109)}"
+-- Note only one address may be specified per Reachable Address
+-- in the MIB
+        DEFVAL { ''H }
+    ::= { isisRAEntry 8 }
+
+    isisRASNPAMask OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "A bit mask with 1 bit indicating the positions in the
+             effective destination address from which embedded SNPA
+             information is to be extracted.  For the extraction, the
+             first octet of the isisRASNPAMask object value is aligned
+             with the first octet (AFI) of the NSAP Address.  If the
+             isisRASNPAMask object value and NSAP Address are of
+             different lengths, the shorter of the two is logically
+             padded with zeros before performing the extraction.  This
+             object follows the ManualOrAutomatic behavior."
+        REFERENCE "{ISIS.aoi sNPAMask (122)}"
+        DEFVAL { '00'H }
+    ::= { isisRAEntry 9 }
+
+    isisRASNPAPrefix OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "A fixed SNPA prefix for use when the isisRAMapType is
+             extractDSP.  The SNPA Address to use is formed by
+             concatenating the fixed SNPA prefix with a variable SNPA
+             part that is extracted from the effective destination
+             address.  For Reachable Address prefixes in which the
+             entire SNPA is embedded in the DSP, the SNPA Prefix shall
+             be null.  This object follows the ManualOrAutomatic
+             behavior."
+        REFERENCE "{ISIS.aoi sNPAPrefix (123)}"
+        DEFVAL { '00'H }
+    ::= { isisRAEntry 10 }
+
+    isisRAType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                manual (1),
+                automatic (2)
+            }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The type of Reachable address.  Those of type
+             manual are created by the network manager.  Those
+             of type automatic are created through propagation
+             of routing information from another routing
+             protocol (e.g., IDRP). "
+        DEFVAL {manual}
+    ::= {isisRAEntry 11 }
+
+-- The IP Reachable Address Table
+
+-- Each entry records information about one IP reachable
+-- address manually configured on this system or learned from
+-- another protocol.
+
+    isisIPRATable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisIPRAEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table of IP Reachable Addresses to networks,
+             subnetworks, or hosts either manually configured or
+             learned from another protocol."
+    ::= { isisIPReachAddr 1 }
+
+    isisIPRAEntry OBJECT-TYPE
+        SYNTAX IsisIPRAEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry defines an IP Reachable Address to a network,
+             subnetwork, or host.
+
+             Each IP Reachable Address may have multiple entries in the
+             table, one for each equal cost path to the reachable
+             address.
+
+             Dynamically created rows MUST survive an agent reboot.
+
+             Implementers need to be aware that if the total number
+             of elements (octets or sub-identifiers) in
+             isisIPRADestr, isisIPRADestPrefixLen, and
+             isisIPRANextHopIndex is too great, then OIDs of column
+             instances in this table will have more than 128
+             subidentifiers and cannot be accessed using SNMPv1,
+             SNMPv2c, or SNMPv3."
+        INDEX {  isisSysLevelIndex,
+                 isisIPRADestType,
+                 isisIPRADest,
+                 isisIPRADestPrefixLen,
+                 isisIPRANextHopIndex }
+    ::= { isisIPRATable 1 }
+
+    IsisIPRAEntry ::=
+        SEQUENCE {
+            isisIPRADestType
+                InetAddressType,
+            isisIPRADest
+                InetAddress,
+            isisIPRADestPrefixLen
+                InetAddressPrefixLength,
+            isisIPRANextHopIndex
+                Unsigned32,
+            isisIPRANextHopType
+                InetAddressType,
+            isisIPRANextHop
+                InetAddress,
+            isisIPRAType
+                INTEGER,
+            isisIPRAExistState
+                RowStatus,
+            isisIPRAAdminState
+                IsisAdminState,
+            isisIPRAMetric
+                IsisDefaultMetric,
+            isisIPRAMetricType
+                IsisMetricType,
+            isisIPRAFullMetric
+                IsisFullMetric,
+            isisIPRASNPAAddress
+                IsisOSINSAddress,
+            isisIPRASourceType
+                INTEGER
+        }
+
+    isisIPRADestType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The type of this IP Reachable Address."
+    ::= { isisIPRAEntry 1 }
+
+    isisIPRADest OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The destination of this IP Reachable Address.  This is
+             a network address, subnetwork address, or host
+             address.
+
+             The type of this address is determined by the value of
+             the isisIPRADestType object."
+    ::= { isisIPRAEntry 2 }
+
+    isisIPRADestPrefixLen OBJECT-TYPE
+        SYNTAX InetAddressPrefixLength
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The length of the IP Netmask for Reachability Address.
+
+             The values for the index objects isisIPRADest and
+             isisIPRADestPrefixLen must be consistent.  When the value
+             of isisIPRADest (excluding the zone index, if one
+             is present) is x, then the bitwise logical-AND
+             of x with the value of the mask formed from the
+             corresponding index object isisIPRADestPrefixLen MUST be
+             equal to x.  If not, then the index pair is not
+             consistent, and an inconsistentName error must be
+             returned on SET or CREATE requests."
+    ::= { isisIPRAEntry 3 }
+
+    isisIPRANextHopIndex OBJECT-TYPE
+        SYNTAX Unsigned32(1..4294967295)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Index of next hop.  Used when there are multiple Equal
+             Cost Multipath alternatives for the same destination."
+    ::= { isisIPRAEntry 4 }
+
+    isisIPRANextHopType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The type of the IP next hop address."
+    ::= { isisIPRAEntry 5 }
+
+    isisIPRANextHop OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The IP next hop to this destination.
+
+             The type of this address is determined by the value of
+             the isisIPRANextHopType object."
+    ::= { isisIPRAEntry 6 }
+
+    isisIPRAType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                manual (1),
+                automatic (2)
+            }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The type of this IP Reachable Address.  Those of type
+             manual are created by the network manager.  Those of type
+             automatic are created through propagation of routing
+             information from another routing protocol.  This object
+             follows the ManualOrAutomatic behavior."
+    ::= { isisIPRAEntry 7 }
+
+    isisIPRAExistState OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The state of this IP Reachable Address.  This object
+             follows the ExistenceState and ManualOrAutomatic
+             behaviors.  Support for 'createAndWait' and
+             'notInService' is not required.
+
+             A row entry cannot be modified when the value of this
+             object is 'active'."
+    ::= { isisIPRAEntry 8 }
+
+    isisIPRAAdminState OBJECT-TYPE
+        SYNTAX IsisAdminState
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The administrative state of the IP Reachable Address.  This
+             object follows the IsisAdminState and ManualOrAutomatic
+
+             behaviors."
+        DEFVAL { off }
+    ::= { isisIPRAEntry 9 }
+
+    isisIPRAMetric OBJECT-TYPE
+        SYNTAX IsisDefaultMetric
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The metric value for reaching the specified
+             destination over this circuit.  This object follows the
+             ManualOrAutomatic behavior."
+        DEFVAL { 10 }
+    ::= { isisIPRAEntry 10 }
+
+    isisIPRAMetricType OBJECT-TYPE
+        SYNTAX IsisMetricType
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Indicates whether the metric is internal or
+             external.  This object follows the ManualOrAutomatic
+             behavior."
+        DEFVAL { internal }
+    ::= { isisIPRAEntry 11 }
+
+    isisIPRAFullMetric OBJECT-TYPE
+        SYNTAX IsisFullMetric
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The wide metric value for reaching the specified
+             destination over this circuit.  This object follows the
+             ManualOrAutomatic behavior."
+        DEFVAL { 10 }
+    ::= { isisIPRAEntry 12 }
+
+    isisIPRASNPAAddress OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "The SNPA Address to which a PDU may be forwarded in
+             order to reach a destination that matches this IP
+             Reachable Address.  This object follows the
+             ManualOrAutomatic behavior."
+        DEFVAL { ''H }
+    ::= { isisIPRAEntry 13 }
+
+    isisIPRASourceType OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+                static (1),
+                direct (2),
+                ospfv2 (3),
+                ospfv3 (4),
+                isis   (5),
+                rip    (6),
+                igrp   (7),
+                eigrp  (8),
+                bgp    (9),
+                other (10)
+            }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The origin of this route."
+    ::= { isisIPRAEntry 14 }
+
+-- The LSP Database Table
+--
+-- The first table provides Summary Information about LSPs
+-- The next table provides a complete record
+
+    isisLSPSummaryTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisLSPSummaryEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table of LSP Headers."
+    ::= { isisLSPDataBase 1 }
+
+    isisLSPSummaryEntry OBJECT-TYPE
+        SYNTAX IsisLSPSummaryEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry provides a summary describing an
+             LSP currently stored in the system.
+
+             Dynamically learned rows will not survive an
+             agent reboot."
+        INDEX {  isisLSPLevel,
+                 isisLSPID }
+    ::= { isisLSPSummaryTable 1 }
+
+    IsisLSPSummaryEntry ::=
+
+        SEQUENCE {
+            isisLSPLevel
+                IsisISLevel,
+            isisLSPID
+                IsisLinkStatePDUID,
+            isisLSPSeq
+                Unsigned32,
+            isisLSPZeroLife
+                TruthValue,
+            isisLSPChecksum
+                IsisUnsigned16TC,
+            isisLSPLifetimeRemain
+                IsisUnsigned16TC,
+            isisLSPPDULength
+                IsisUnsigned16TC,
+            isisLSPAttributes
+                IsisUnsigned8TC
+        }
+
+    isisLSPLevel OBJECT-TYPE
+        SYNTAX IsisISLevel
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "At which level does this LSP appear?"
+    ::= { isisLSPSummaryEntry 1 }
+
+    isisLSPID OBJECT-TYPE
+        SYNTAX IsisLinkStatePDUID
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The 8-byte LSP ID for this Link State PDU."
+    ::= { isisLSPSummaryEntry 2 }
+
+    isisLSPSeq OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The sequence number for this LSP."
+    ::= { isisLSPSummaryEntry 3 }
+
+    isisLSPZeroLife OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Is this LSP being purged by this system?"
+    ::= { isisLSPSummaryEntry 4 }
+
+    isisLSPChecksum OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The 16-bit Fletcher Checksum for this LSP."
+    ::= { isisLSPSummaryEntry 5 }
+
+    isisLSPLifetimeRemain OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC
+        UNITS "seconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The remaining lifetime, in seconds, for this LSP."
+    ::= { isisLSPSummaryEntry 6 }
+
+    isisLSPPDULength OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The length of this LSP."
+    ::= { isisLSPSummaryEntry 7 }
+
+    isisLSPAttributes OBJECT-TYPE
+        SYNTAX IsisUnsigned8TC
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Flags carried by the LSP."
+    ::= { isisLSPSummaryEntry 8 }
+
+-- LSP Table
+--
+-- The full LSP as a sequence of {Type, Len, Value} tuples
+-- Since the underlying LSP may have changed while downloading
+-- TLVs, we provide the Sequence number and Checksum for each
+-- LSP TLV, so the network manager may verify that they are
+-- still working on the same version of the LSP.
+
+    isisLSPTLVTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF IsisLSPTLVEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The table of LSPs in the database."
+    ::= { isisLSPDataBase 2 }
+
+    isisLSPTLVEntry OBJECT-TYPE
+        SYNTAX IsisLSPTLVEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry describes a TLV within
+             an LSP currently stored in the system.
+
+             Dynamically learned rows will not survive an
+             agent reboot."
+        INDEX {  isisLSPLevel,
+                 isisLSPID,
+                 isisLSPTLVIndex }
+    ::= { isisLSPTLVTable 1 }
+
+    IsisLSPTLVEntry ::=
+        SEQUENCE {
+            isisLSPTLVIndex
+                Unsigned32,
+            isisLSPTLVSeq
+                Unsigned32,
+            isisLSPTLVChecksum
+                IsisUnsigned16TC,
+            isisLSPTLVType
+                IsisUnsigned8TC,
+            isisLSPTLVLen
+                IsisUnsigned8TC,
+            isisLSPTLVValue
+                OCTET STRING
+        }
+
+    isisLSPTLVIndex OBJECT-TYPE
+        SYNTAX Unsigned32(1..4294967295)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The index of this TLV in the LSP.  The first TLV has
+             index 1, and the Nth TLV has an index of N."
+    ::= { isisLSPTLVEntry 1 }
+
+    isisLSPTLVSeq OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The sequence number for this LSP."
+    ::= { isisLSPTLVEntry 2 }
+
+    isisLSPTLVChecksum OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The 16-bit Fletcher Checksum for this LSP."
+    ::= { isisLSPTLVEntry 3 }
+
+    isisLSPTLVType OBJECT-TYPE
+        SYNTAX IsisUnsigned8TC
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The type of this TLV."
+    ::= { isisLSPTLVEntry 4 }
+
+    isisLSPTLVLen OBJECT-TYPE
+        SYNTAX IsisUnsigned8TC
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The length of this TLV."
+    ::= { isisLSPTLVEntry 5 }
+
+    isisLSPTLVValue OBJECT-TYPE
+        SYNTAX OCTET STRING (SIZE(0..255))
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The value of this TLV."
+    ::= { isisLSPTLVEntry 6 }
+
+-- The IS-IS Notification Table
+
+-- The IS-IS Notification Table records fields that are
+-- required for notifications
+
+    isisNotificationEntry OBJECT IDENTIFIER
+        ::= { isisNotification 1 }
+
+    isisNotificationSysLevelIndex OBJECT-TYPE
+        SYNTAX IsisLevel
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "The system level for this notification."
+    ::= { isisNotificationEntry 1 }
+
+    isisNotificationCircIfIndex OBJECT-TYPE
+        SYNTAX Unsigned32 (1..2147483647)
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "The identifier of this circuit relevant to
+             this notification."
+    ::= { isisNotificationEntry 2 }
+
+    isisPduLspId OBJECT-TYPE
+        SYNTAX IsisLinkStatePDUID
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "An Octet String that uniquely identifies
+             a Link State PDU."
+    ::= { isisNotificationEntry 3 }
+
+    isisPduFragment OBJECT-TYPE
+        SYNTAX IsisPDUHeader
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds up to 64 initial bytes of a PDU that
+             triggered the notification."
+    ::= { isisNotificationEntry 4 }
+
+    isisPduFieldLen OBJECT-TYPE
+        SYNTAX IsisUnsigned8TC
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds the System ID length reported in PDU we received."
+    ::= { isisNotificationEntry 5 }
+
+    isisPduMaxAreaAddress OBJECT-TYPE
+        SYNTAX IsisUnsigned8TC
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds the Max Area Addresses reported in a PDU
+             we received."
+    ::= { isisNotificationEntry 6 }
+
+    isisPduProtocolVersion OBJECT-TYPE
+        SYNTAX IsisUnsigned8TC
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds the Protocol version reported in PDU we received."
+    ::= { isisNotificationEntry 7 }
+
+    isisPduLspSize OBJECT-TYPE
+        SYNTAX Unsigned32 (0..2147483647)
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds the size of LSP we received that is too
+             big to forward."
+    ::= { isisNotificationEntry 8 }
+
+    isisPduOriginatingBufferSize OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (0..16000)
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds the size of isisSysLevelOrigLSPBuffSize advertised
+             by the peer in the originatingLSPBufferSize TLV.
+             If the peer does not advertise this TLV, this
+             value is set to 0."
+    ::= { isisNotificationEntry 9 }
+
+    isisPduBufferSize OBJECT-TYPE
+        SYNTAX IsisUnsigned16TC (0..16000)
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "Holds the size of LSP received from peer."
+    ::= { isisNotificationEntry 10 }
+
+    isisPduProtocolsSupported OBJECT-TYPE
+        SYNTAX OCTET STRING (SIZE(0..255))
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "The list of protocols supported by an
+             adjacent system.  This may be empty."
+    ::= { isisNotificationEntry 11 }
+
+    isisAdjState OBJECT-TYPE
+        SYNTAX INTEGER
+            {
+
+                 down (1),
+                 initializing (2),
+                 up (3),
+                 failed(4)
+            }
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "The current state of an adjacency."
+    ::= { isisNotificationEntry 12 }
+
+    isisErrorOffset OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "An offset to a problem in a PDU.  If the problem
+             is a malformed TLV, this points to the beginning
+             of the TLV.  If the problem is in the header, this
+             points to the byte that is suspicious."
+    ::= { isisNotificationEntry 13 }
+
+    isisErrorTLVType OBJECT-TYPE
+        SYNTAX Unsigned32 (0..255)
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+             "The type for a malformed TLV."
+    ::= { isisNotificationEntry 14 }
+
+    isisNotificationAreaAddress OBJECT-TYPE
+        SYNTAX IsisOSINSAddress
+        MAX-ACCESS accessible-for-notify
+        STATUS current
+        DESCRIPTION
+            "An Area Address."
+    ::= { isisNotificationEntry 15 }
+
+-- Notification definitions
+--
+-- Note that notifications can be disabled by setting
+--     isisSysNotificationEnable false
+
+    isisDatabaseOverload NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisSysLevelState
+        }
+        STATUS current
+        DESCRIPTION
+            "This notification is generated when the system
+             enters or leaves the Overload state.  The number
+             of times this has been generated and cleared is kept
+             track of by isisSysStatLSPDbaseOloads."
+    ::= { isisNotifications 1 }
+
+    isisManualAddressDrops NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationAreaAddress
+        }
+        STATUS current
+        DESCRIPTION
+            "This notification is generated when one of the
+             manual areaAddresses assigned to this system is
+             ignored when computing routes.  The object
+             isisNotificationAreaAddress describes the area that
+             has been dropped.
+
+             The number of times this event has been generated
+             is counted by isisSysStatManAddrDropFromAreas.
+
+             The agent must throttle the generation of
+             consecutive isisManualAddressDrops notifications
+             so that there is at least a 5-second gap between
+             notifications of this type.  When notifications
+             are throttled, they are dropped, not queued for
+             sending at a future time."
+    ::= { isisNotifications 2 }
+
+    isisCorruptedLSPDetected NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisPduLspId
+        }
+        STATUS current
+        DESCRIPTION
+            "This notification is generated when we find that
+             an LSP that was stored in memory has become
+             corrupted.  The number of times this has been
+             generated is counted by isisSysCorrLSPs.
+
+             We forward an LSP ID.  We may have independent
+             knowledge of the ID, but in some implementations
+             there is a chance that the ID itself will be
+             corrupted."
+    ::= { isisNotifications 3 }
+
+    isisAttemptToExceedMaxSequence NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisPduLspId
+        }
+        STATUS current
+        DESCRIPTION
+            "When the sequence number on an LSP we generate
+             wraps the 32-bit sequence counter, we purge and
+             wait to re-announce this information.  This
+             notification describes that event.  Since these
+             should not be generated rapidly, we generate
+             an event each time this happens.
+
+             While the first 6 bytes of the LSPID are ours,
+             the other two contain useful information."
+    ::= { isisNotifications 4 }
+
+    isisIDLenMismatch  NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisPduFieldLen,
+            isisNotificationCircIfIndex,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a PDU
+             with a different value for the System ID Length.
+             This notification includes an index to identify
+             the circuit where we saw the PDU and the header of
+             the PDU, which may help a network manager identify
+             the source of the confusion.
+
+             The agent must throttle the generation of
+             consecutive isisIDLenMismatch notifications
+             so that there is at least a 5-second gap between
+             notifications of this type.  When notifications
+             are throttled, they are dropped, not queued for
+             sending at a future time."
+    ::= { isisNotifications 5 }
+
+    isisMaxAreaAddressesMismatch NOTIFICATION-TYPE
+        OBJECTS {
+
+            isisNotificationSysLevelIndex,
+            isisPduMaxAreaAddress,
+            isisNotificationCircIfIndex,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a PDU
+             with a different value for the Maximum Area
+             Addresses.  This notification includes the
+             header of the packet, which may help a
+             network manager identify the source of the
+             confusion.
+
+             The agent must throttle the generation of
+             consecutive isisMaxAreaAddressesMismatch
+             notifications so that there is at least a 5-second
+             gap between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 6 }
+
+    isisOwnLSPPurge NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduLspId
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a PDU
+             with our systemID and zero age.  This
+             notification includes the circuit Index
+             and router ID from the LSP, if available,
+             which may help a network manager
+             identify the source of the confusion."
+    ::= { isisNotifications 7 }
+
+    isisSequenceNumberSkip NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduLspId
+        }
+        STATUS current
+        DESCRIPTION
+            "When we receive an LSP with our System ID
+             and different contents, we may need to reissue
+             the LSP with a higher sequence number.
+
+             We send this notification if we need to increase
+             the sequence number by more than one.  If two
+             Intermediate Systems are configured with the same
+             System ID, this notification will fire."
+    ::= { isisNotifications 8 }
+
+    isisAuthenticationTypeFailure NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a PDU
+             with the wrong authentication type field.
+             This notification includes the header of the
+             packet, which may help a network manager
+             identify the source of the confusion.
+
+             The agent must throttle the generation of
+             consecutive isisAuthenticationTypeFailure
+             notifications so that there is at least a 5-second
+             gap between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 9 }
+
+    isisAuthenticationFailure NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a PDU
+             with an incorrect authentication information
+             field.  This notification includes the header
+             of the packet, which may help a network manager
+             identify the source of the confusion.
+
+             The agent must throttle the generation of
+             consecutive isisAuthenticationFailure
+             notifications so that there is at least a 5-second
+             gap between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 10 }
+
+    isisVersionSkew NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduProtocolVersion,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a Hello
+             PDU from an IS running a different version
+             of the protocol.  This notification includes
+             the header of the packet, which may help a
+             network manager identify the source of the
+             confusion.
+
+             The agent must throttle the generation of
+             consecutive isisVersionSkew notifications
+             so that there is at least a 5-second gap
+             between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 11 }
+
+    isisAreaMismatch NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationCircIfIndex,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a Hello
+             PDU from an IS that does not share any
+             area address.  This notification includes
+             the header of the packet, which may help a
+             network manager identify the source of the
+             confusion.
+
+             The agent must throttle the generation of
+             consecutive isisAreaMismatch notifications
+             so that there is at least a 5-second gap
+             between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 12 }
+
+    isisRejectedAdjacency NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we receive a Hello
+             PDU from an IS but do not establish an
+             adjacency for some reason.
+
+             The agent must throttle the generation of
+             consecutive isisRejectedAdjacency notifications
+             so that there is at least a 5-second gap
+             between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 13 }
+
+    isisLSPTooLargeToPropagate NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduLspSize,
+            isisPduLspId
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when we attempt to propagate
+             an LSP that is larger than the dataLinkBlockSize
+             for the circuit.
+
+             The agent must throttle the generation of
+             consecutive isisLSPTooLargeToPropagate notifications
+             so that there is at least a 5-second gap
+             between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+
+             queued for sending at a future time."
+    ::= { isisNotifications 14 }
+
+    isisOrigLSPBuffSizeMismatch NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduLspId,
+            isisPduOriginatingBufferSize,
+            isisPduBufferSize
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when a Level 1 LSP or Level
+             2 LSP is received that is larger than the local
+             value for isisSysLevelOrigLSPBuffSize, or when an
+             LSP is received that contains the supported Buffer Size
+             option and the value in the PDU option field does
+             not match the local value for isisSysLevelOrigLSPBuffSize.
+             We pass up the size from the option field and the
+             size of the LSP when one of them exceeds our configuration.
+
+             The agent must throttle the generation of
+             consecutive isisOrigLSPBuffSizeMismatch notifications
+             so that there is at least a 5-second gap
+             between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 15 }
+
+    isisProtocolsSupportedMismatch NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduProtocolsSupported,
+            isisPduLspId,
+            isisPduFragment
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when a non-pseudonode
+             segment 0 LSP is received that has no matching
+             protocols supported.  This may be because the system
+             does not generate the field, or because there are no
+             common elements.  The list of protocols supported
+             should be included in the notification: it may be
+
+             empty if the TLV is not supported, or if the
+             TLV is empty.
+
+             The agent must throttle the generation of
+             consecutive isisProtocolsSupportedMismatch
+             notifications so that there is at least a 5-second
+             gap between notifications of this type.  When
+             notifications are throttled, they are dropped, not
+             queued for sending at a future time."
+    ::= { isisNotifications 16 }
+
+    isisAdjacencyChange NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduLspId,
+            isisAdjState
+        }
+        STATUS current
+        DESCRIPTION
+            "A notification sent when an adjacency changes
+             state, entering or leaving state up.
+             The first 6 bytes of the isisPduLspId are the
+             SystemID of the adjacent IS.
+             The isisAdjState is the new state of the adjacency."
+    ::= { isisNotifications 17 }
+
+    isisLSPErrorDetected NOTIFICATION-TYPE
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisPduLspId,
+            isisNotificationCircIfIndex,
+            isisPduFragment,
+            isisErrorOffset,
+            isisErrorTLVType
+        }
+        STATUS current
+        DESCRIPTION
+            "This notification is generated when we receive
+             an LSP with a parse error.  The isisCircIfIndex
+             holds an index of the circuit on which the PDU
+             arrived.  The isisPduFragment holds the start of the
+             LSP, and the isisErrorOffset points to the problem.
+
+             If the problem is a malformed TLV, isisErrorOffset
+             points to the start of the TLV, and isisErrorTLVType
+
+             holds the value of the type.
+
+             If the problem is with the LSP header, isisErrorOffset
+             points to the suspicious byte.
+
+             The number of such LSPs is accumulated in
+             isisSysStatLSPErrors."
+    ::= { isisNotifications 18 }
+
+-- Agent Conformance Definitions
+-- We define the objects a conformant agent must define
+
+isisCompliances OBJECT IDENTIFIER ::= { isisConformance 1 }
+isisGroups      OBJECT IDENTIFIER ::= { isisConformance 2 }
+
+-- compliance statements
+
+    isisCompliance MODULE-COMPLIANCE
+        STATUS current
+        DESCRIPTION
+            "The compliance statement for agents that support
+             the IS-IS MIB.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements.
+             Those requirements and similar requirements for
+             related objects are expressed below, in
+             pseudo-OBJECT clause form, in this description:
+
+             -- OBJECT isisSummAddressType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4 Summary
+             --    Addresses and anticipates the support of
+             --    IPv6 addresses.
+             --
+             --
+             -- OBJECT isisRedistributeAddrType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4
+             --    Redistribution Addresses and anticipates
+             --    the support of IPv6 addresses."
+             --
+
+             --
+             -- OBJECT isisISAdjIPAddrType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4
+             --    Adjacency Addresses and anticipates the
+             --    support of IPv6 addresses.
+        MODULE -- this module
+            MANDATORY-GROUPS {
+                    isisSystemGroup,
+                    isisCircuitGroup,
+                    isisISAdjGroup,
+                    isisNotificationObjectGroup,
+                    isisNotificationGroup
+            }
+    ::= { isisCompliances 1 }
+
+    -- List of all groups, mandatory and optional
+    isisAdvancedCompliance MODULE-COMPLIANCE
+        STATUS current
+        DESCRIPTION
+            "The compliance statement for agents that fully
+             support the IS-IS MIB.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements.
+             Those requirements and similar requirements for
+             related objects are expressed below, in
+             pseudo-OBJECT clause form, in this description:
+
+             -- OBJECT isisSummAddressType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4 Summary
+             --    Addresses and anticipates the support of
+             --    IPv6 addresses.
+             --
+             --
+             -- OBJECT isisRedistributeAddrType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4
+             --    Redistribution Addresses and anticipates
+             --    the support of IPv6 addresses."
+
+             --
+             --
+             -- OBJECT isisISAdjIPAddrType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4
+             --    Adjacency Addresses and anticipates the
+             --    support of IPv6 addresses.
+             --
+             --
+             -- OBJECT isisIPRADestType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4 RA
+             --    Addresses and anticipates the support of
+             --    IPv6 addresses.
+             --
+             --
+             -- OBJECT isisIPRANextHopType
+             -- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+             --
+             -- DESCRIPTION
+             --    The MIB requires support for IPv4 NextHop
+             --    Addresses and anticipates the support of
+             --    IPv6 addresses.
+        MODULE -- this module
+            MANDATORY-GROUPS {
+                    isisSystemGroup,
+                    isisCircuitGroup,
+                    isisISAdjGroup,
+                    isisNotificationObjectGroup,
+                    isisNotificationGroup,
+                    isisISPDUCounterGroup,
+                    isisRATableGroup,
+                    isisISIPRADestGroup,
+                    isisLSPGroup
+            }
+    ::= { isisCompliances 2 }
+
+    isisReadOnlyCompliance MODULE-COMPLIANCE
+       STATUS     current
+       DESCRIPTION
+               "When this MIB is implemented without support for
+                read-create (i.e., in read-only mode), the
+                implementation can claim read-only compliance.  Such
+                a device can then be monitored but cannot be
+
+                configured with this MIB."
+       MODULE -- this module
+            MANDATORY-GROUPS {
+                    isisSystemGroup,
+                    isisCircuitGroup,
+                    isisISAdjGroup
+            }
+
+       OBJECT isisSysLevelType
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysID
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysMaxPathSplits
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysMaxLSPGenInt
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysPollESHelloRate
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysWaitTime
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysAdminState
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysL2toL1Leaking
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysMaxAge
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisManAreaAddrExistState
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelOrigLSPBuffSize
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelMinLSPGenInt
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelSetOverload
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelSetOverloadUntil
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelMetricStyle
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelSPFConsiders
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysLevelTEEnabled
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSysReceiveLSPBufferSize
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSummAddrExistState
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSummAddrMetric
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisSummAddrFullMetric
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisRedistributeAddrExistState
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircAdminState
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircExistState
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircType
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircExtDomain
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelType
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircPassiveCircuit
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircMeshGroupEnabled
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircMeshGroup
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircSmallHellos
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircExtendedCircID
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircIfIndex
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCirc3WayEnabled
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelMetric
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelWideMetric
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelISPriority
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelHelloMultiplier
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelHelloTimer
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelDRHelloTimer
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelLSPThrottle
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelMinLSPRetransInt
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelCSNPInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT isisCircLevelPartSNPInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+    ::= { isisCompliances 3 }
+
+-- MIB Grouping
+
+    isisSystemGroup OBJECT-GROUP
+        OBJECTS {
+            isisSysVersion,
+            isisSysLevelType,
+            isisSysID,
+            isisSysMaxPathSplits,
+            isisSysMaxLSPGenInt,
+            isisSysPollESHelloRate,
+            isisSysWaitTime,
+            isisSysAdminState,
+            isisSysL2toL1Leaking,
+            isisSysMaxAge,
+            isisSysProtSupported,
+            isisSysNotificationEnable,
+            isisManAreaAddrExistState,
+            isisSysLevelOrigLSPBuffSize,
+            isisSysLevelMinLSPGenInt,
+            isisSysLevelState,
+            isisSysLevelSetOverload,
+            isisSysLevelSetOverloadUntil,
+            isisSysLevelMetricStyle,
+            isisSysLevelSPFConsiders,
+            isisSysLevelTEEnabled,
+            isisSysReceiveLSPBufferSize,
+            isisSummAddrExistState,
+            isisSummAddrMetric,
+            isisAreaAddr,
+            isisSummAddrFullMetric,
+            isisRedistributeAddrExistState,
+            isisRouterHostName,
+            isisRouterID,
+            isisSysStatCorrLSPs,
+            isisSysStatLSPDbaseOloads,
+            isisSysStatManAddrDropFromAreas,
+            isisSysStatAttmptToExMaxSeqNums,
+            isisSysStatSeqNumSkips,
+            isisSysStatOwnLSPPurges,
+            isisSysStatIDFieldLenMismatches,
+            isisSysStatPartChanges,
+            isisSysStatSPFRuns,
+            isisSysStatAuthTypeFails,
+            isisSysStatAuthFails,
+            isisSysStatLSPErrors
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to manage an
+             IS-IS router."
+    ::= { isisGroups 1 }
+
+    isisCircuitGroup OBJECT-GROUP
+        OBJECTS {
+            isisNextCircIndex,
+            isisCircAdminState,
+            isisCircExistState,
+            isisCircType,
+            isisCircExtDomain,
+            isisCircLevelType,
+            isisCircAdjChanges,
+            isisCircNumAdj,
+            isisCircInitFails,
+            isisCircRejAdjs,
+            isisCircIDFieldLenMismatches,
+            isisCircMaxAreaAddrMismatches,
+            isisCircAuthTypeFails,
+            isisCircAuthFails,
+            isisCircLANDesISChanges,
+            isisCircPassiveCircuit,
+            isisCircMeshGroupEnabled,
+            isisCircMeshGroup,
+            isisCircSmallHellos,
+            isisCircLastUpTime,
+            isisCirc3WayEnabled,
+            isisCircExtendedCircID,
+            isisCircIfIndex,
+            isisCircLevelMetric,
+            isisCircLevelWideMetric,
+            isisCircLevelISPriority,
+            isisCircLevelIDOctet,
+            isisCircLevelID,
+            isisCircLevelDesIS,
+            isisCircLevelHelloMultiplier,
+            isisCircLevelHelloTimer,
+            isisCircLevelDRHelloTimer,
+            isisCircLevelLSPThrottle,
+            isisCircLevelMinLSPRetransInt,
+            isisCircLevelCSNPInterval,
+            isisCircLevelPartSNPInterval
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to describe an
+             IS-IS Circuit."
+    ::= { isisGroups 2 }
+
+    isisISAdjGroup OBJECT-GROUP
+        OBJECTS {
+            isisISAdjState,
+            isisISAdj3WayState,
+            isisISAdjNeighSNPAAddress,
+            isisISAdjNeighSysType,
+            isisISAdjNeighSysID,
+            isisISAdjNbrExtendedCircID,
+            isisISAdjUsage,
+            isisISAdjHoldTimer,
+            isisISAdjNeighPriority,
+            isisISAdjLastUpTime,
+            isisISAdjAreaAddress,
+            isisISAdjIPAddrType,
+            isisISAdjIPAddrAddress,
+            isisISAdjProtSuppProtocol
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to manage an
+             IS-IS Adjacency."
+    ::= { isisGroups 3 }
+
+    isisNotificationObjectGroup OBJECT-GROUP
+        OBJECTS {
+            isisNotificationSysLevelIndex,
+            isisNotificationCircIfIndex,
+            isisPduLspId,
+            isisPduFragment,
+            isisPduFieldLen,
+            isisPduMaxAreaAddress,
+            isisPduProtocolVersion,
+            isisPduLspSize,
+            isisPduOriginatingBufferSize,
+            isisPduBufferSize,
+            isisPduProtocolsSupported,
+            isisAdjState,
+            isisErrorOffset,
+            isisErrorTLVType,
+            isisNotificationAreaAddress
+        }
+        STATUS current
+        DESCRIPTION
+            "The objects used to record notification parameters."
+    ::= { isisGroups 4 }
+
+    isisNotificationGroup        NOTIFICATION-GROUP
+        NOTIFICATIONS {
+            isisDatabaseOverload,
+            isisManualAddressDrops,
+            isisCorruptedLSPDetected,
+            isisAttemptToExceedMaxSequence,
+            isisIDLenMismatch,
+            isisMaxAreaAddressesMismatch,
+            isisOwnLSPPurge,
+            isisSequenceNumberSkip,
+            isisAuthenticationTypeFailure,
+            isisAuthenticationFailure,
+            isisVersionSkew,
+            isisAreaMismatch,
+            isisRejectedAdjacency,
+            isisLSPTooLargeToPropagate,
+            isisOrigLSPBuffSizeMismatch,
+            isisProtocolsSupportedMismatch,
+            isisAdjacencyChange,
+            isisLSPErrorDetected
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of notifications sent by an IS."
+    ::= { isisGroups 5 }
+
+    isisISPDUCounterGroup OBJECT-GROUP
+        OBJECTS {
+            isisPacketCountIIHello,
+            isisPacketCountISHello,
+            isisPacketCountESHello,
+            isisPacketCountLSP,
+            isisPacketCountCSNP,
+            isisPacketCountPSNP,
+            isisPacketCountUnknown
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to count protocol PDUs."
+    ::= { isisGroups 6 }
+
+    isisRATableGroup OBJECT-GROUP
+        OBJECTS {
+            isisRAExistState,
+            isisRAAdminState,
+            isisRAAddrPrefix,
+            isisRAMapType,
+            isisRAMetric,
+            isisRAMetricType,
+            isisRASNPAAddress,
+            isisRASNPAMask,
+            isisRASNPAPrefix,
+            isisRAType
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to manage the
+
+             reachable NSAP prefixes."
+    ::= { isisGroups 7 }
+
+    isisISIPRADestGroup OBJECT-GROUP
+        OBJECTS {
+            isisIPRANextHopType,
+            isisIPRANextHop,
+            isisIPRAType,
+            isisIPRAExistState,
+            isisIPRAAdminState,
+            isisIPRAMetric,
+            isisIPRAFullMetric,
+            isisIPRAMetricType,
+            isisIPRASNPAAddress,
+            isisIPRASourceType
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to manage configured
+             IP addresses."
+    ::= { isisGroups 8 }
+
+    isisLSPGroup OBJECT-GROUP
+        OBJECTS {
+            isisLSPSeq,
+            isisLSPZeroLife,
+            isisLSPChecksum,
+            isisLSPLifetimeRemain,
+            isisLSPPDULength,
+            isisLSPAttributes,
+            isisLSPTLVSeq,
+            isisLSPTLVChecksum,
+            isisLSPTLVType,
+            isisLSPTLVLen,
+            isisLSPTLVValue
+        }
+        STATUS current
+        DESCRIPTION
+            "The collections of objects used to observe the LSP
+             Database."
+    ::= { isisGroups 9 }
+
+END
diff --git a/snmp_builder/mibs/ISNS-MIB.mib b/snmp_builder/mibs/ISNS-MIB.mib
new file mode 100644
index 0000000..73fef23
--- /dev/null
+++ b/snmp_builder/mibs/ISNS-MIB.mib
@@ -0,0 +1,3243 @@
+ISNS-MIB DEFINITIONS ::= BEGIN
+   IMPORTS
+   --  From RFC 2578
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       NOTIFICATION-TYPE,
+       Integer32,
+       Unsigned32,
+       Gauge32,
+       mib-2
+            FROM SNMPv2-SMI
+
+   --  From RFC 2579
+       TEXTUAL-CONVENTION,
+       TimeStamp,
+       TruthValue
+            FROM SNMPv2-TC
+
+   --  From RFC 2580
+       OBJECT-GROUP,
+       MODULE-COMPLIANCE,
+       NOTIFICATION-GROUP
+            FROM SNMPv2-CONF
+
+   --  From RFC 3411
+       SnmpAdminString
+            FROM SNMP-FRAMEWORK-MIB
+
+   --  From RFC 4001
+       InetAddressType,
+       InetAddress,
+       InetPortNumber
+            FROM INET-ADDRESS-MIB
+
+   --  From RFC 4044
+       FcNameIdOrZero,
+       FcAddressIdOrZero
+            FROM FC-MGMT-MIB
+
+   --  From RFC 4133
+       PhysicalIndex
+            FROM ENTITY-MIB
+         ;
+
+   isnsMIB  MODULE-IDENTITY
+         LAST-UPDATED "200707110000Z"
+
+         ORGANIZATION "IETF IPS Working Group"
+         CONTACT-INFO "
+           Attn: Kevin Gibbons
+                 2Wire, Inc.
+                 1704 Automation Parkway
+                 San Jose, CA 95131
+                 USA
+                 Tel: +1 408-895-1387
+                 Fax: +1 408-428-9590
+                 Email: kgibbons@yahoo.com
+
+                 G.D. Ramkumar
+                 SnapTell, Inc.
+                 2741 Middlefield Rd, Suite 200
+                 Palo Alto, CA 94306
+                 USA
+                 Tel: +1 650-326-7627
+                 Fax: +1 650-326-7620
+                 Email: gramkumar@stanfordalumni.org
+
+                 Scott Kipp
+                 Brocade
+                 4 McDATA Pkwy
+                 Broomfield, CO 80021
+                 USA
+                 Tel: +1 720-558-3452
+                 Fax: +1 720-558-8999
+                 Email: skipp@brocade.com
+                       "
+            DESCRIPTION
+                    "This module defines management information
+                     specific to internet Storage Name Service
+                     (iSNS) management.
+
+                     Copyright (C) The IETF Trust (2007).
+                     This version of this MIB module is part
+                     of RFC 4939; see the RFC itself for full
+                     legal notices."
+
+            REVISION    "200707110000Z"
+            DESCRIPTION
+                     "Initial version of iSNS Management Module.
+                      This MIB published as RFC 4939."
+              ::=  { mib-2 163 }
+
+      --
+      --  Textual Conventions
+      --
+
+   IsnsDiscoveryDomainSetId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The unique Discovery Domain Set Identifier associated with a
+    Discovery Domain Set (DDS)."
+       REFERENCE      "RFC 4171, Section 6.11.1.1"
+       SYNTAX         Unsigned32 ( 1 .. 4294967295 )
+
+   IsnsDdsStatusType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The status of a Discovery Domain Set (DDS) registered in the
+    iSNS.  The initially assigned values are below:
+                 Bit           Status
+              ---------       ---------
+                 31            DDS Enabled
+              All others       RESERVED
+
+    Setting a bit to 1 indicates the feature is enabled.
+    Otherwise, it is disabled.  The future assignment of any of
+    the reserved values will be documented in a revision of
+    RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.11.1.3"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           reserved24(24), reserved25(25), reserved26(26),
+           reserved27(27), reserved28(28), reserved29(29),
+           reserved30(30),
+           ddsEnabled (31)
+                           }
+
+   IsnsDiscoveryDomainId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The unique Discovery Domain Identifier (DD_ID) associated
+
+    with each Discovery Domain (DD).  This is used to
+    uniquely index and reference a DD."
+       REFERENCE      "RFC 4171, Section 6"
+       SYNTAX         Unsigned32 ( 1 .. 4294967295 )
+
+   IsnsDdFeatureType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "This type defines the features that each Discovery Domain
+    (DD) has.
+                 Bit           Status
+              ---------       ---------
+                 31            Boot List
+              All others       RESERVED
+
+    Boot List: this feature indicates that the targets
+    in this DD provide boot capabilities for the member
+    initiators.
+
+    Setting a bit to 1 indicates the feature is enabled.
+    Otherwise, it is disabled.  The future assignment of any of
+    the reserved values will be documented in a revision of
+    RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.11.2.9"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           reserved24(24), reserved25(25), reserved26(26),
+           reserved27(27), reserved28(28), reserved29(29),
+           reserved30(30),
+           bootlist(31)
+                           }
+
+   IsnsDdDdsModificationType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The methods that can be used to modify the Discovery
+    Domain and Discovery Domain Sets in an iSNS Server
+    instance.
+           Bit             Flag Description
+        ---------   ------------------------------------
+            0       Control Nodes are allowed
+
+            1       Target iSCSI Nodes are allowed
+            2       Initiator iSCSI Nodes are allowed
+            3       Target iFCP Ports are allowed
+            4       Initiator iFCP Ports are allowed
+
+    Setting a bit to 1 indicates the feature is
+    enabled.  Otherwise, it is disabled."
+       REFERENCE      "RFC 4171, Section 2.4"
+       SYNTAX         BITS {
+                         controlNode(0),
+                         targetIscsiNode(1),
+                         initiatorIscsiNode(2),
+                         targetIfcpNode(3),
+                         initiatorIfcpNode(4)
+                           }
+
+   IsnsEntityIndexIdOrZero ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The identifier for the unique integer Entity Index
+    associated with an iSNS registered Entity object, and the
+    value zero.  The value zero is object-specific and MUST
+    therefore be defined as part of the description of any
+    object that uses this syntax.  Examples of the usage of
+    zero might include situations where the Entity is unknown,
+    or not yet registered in the iSNS server.  If a value of
+    zero is not valid for an object, then that MUST be
+    indicated."
+       REFERENCE      "RFC 4171, Section 6"
+       SYNTAX         Unsigned32 ( 0 .. 4294967295 )
+
+   IsnsPortalGroupIndexId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The identifier for the unique integer Portal Group Index
+    associated with an iSNS registered Portal Group object."
+       REFERENCE      "RFC 4171, Section 6"
+       SYNTAX         Unsigned32 ( 1 .. 4294967295 )
+
+   IsnsPortalIndexId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The identifier for the unique integer Portal Index
+    associated with an iSNS registered Portal object.  The
+    index is created by the iSNS Server for mapping between
+
+    registered objects.  The Portal Index used for a specific
+    portal IP-address and port number pair is only persistent
+    across reboots for portals that have been explicitly added
+    to a Discovery Domain (DD).  If a portal is not explicitly
+    registered in any DD, then the index used for a portal can
+    change after a server reinitialization."
+       REFERENCE      "RFC 4171, Section 6"
+       SYNTAX         Unsigned32 ( 1 .. 4294967295 )
+
+   IsnsPortalPortTypeId ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The UDP or TCP port type being used by a Portal for an
+    Entity."
+       REFERENCE      "RFC 4171, Section 6.3.2"
+       SYNTAX         INTEGER { udp(1), tcp(2) }
+
+   IsnsPortalGroupTagIdOrNull ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The Portal Group Tag (PGT) represents an association
+    between a Portal and iSCSI Node using the value range
+    0 to 65535.  A PGT with no association is a NULL
+    value.  The value of -1 indicates a NULL value."
+       REFERENCE      "RFC 4171, Section 6.5.4, and RFC 3720"
+       SYNTAX         Integer32 ( -1 .. 65535 )
+
+   IsnsPortalSecurityType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "Indicates security attribute settings for a Portal that is
+    registered in the iSNS server.  The bitmapVALID field must
+    be set in order for the contents to be considered valid
+    information.  The definitions of the bit fields are based
+    on RFC 4171.  The initial representation of each bit setting
+    (0 or 1) is indicated below.
+          Bit             Flag Description
+        ---------   ------------------------------------
+           25       1 = Tunnel Mode Preferred; 0 = No Preference
+           26       1 = Transport Mode Preferred; 0 = No
+                    Preference
+           27       1 = PFS Enabled; 0 = PFS Disabled
+           28       1 = Aggressive Mode Enabled; 0 = Disabled
+           29       1 = Main Mode Enabled; 0 = MM Disabled
+           30       1 = IKE/IPsec Enabled; 0 = IKE/IPsec
+                    Disabled
+           31       1 = Bitmap VALID; 0 = INVALID
+
+        All others  RESERVED
+
+    The future assignment of any of the reserved values will be
+    documented in a revision of RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.3.9"
+       SYNTAX        BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           reserved24(24),
+           tunnelModePreferred(25),
+           transportModePreferred(26),
+           pfsEnabled(27),
+           agressiveModeEnabled(28),
+           mainModeEnabled(29),
+           ikeIPsecEnabled(30),
+           bitmapVALID(31)
+                          }
+
+   IsnsNodeIndexId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT   "d"
+       STATUS         current
+       DESCRIPTION
+   "The identifier for the unique integer Node Index associated
+    with a storage node.  This index provides a 1-to-1 mapping
+    to an iSCSI node name.  The iSCSI node name maximum length
+    is too long to be used for an index directly.  The iSCSI
+    node index used for a specific iSCSI node name is identical
+    in all DDs, and is persistent across server
+    reinitializations when the iSCSI node is a member of a
+    Discovery Domain (DD) or is registered as a Control Node.
+    Furthermore, index values for recently deregistered objects
+    SHOULD NOT be reused in the short term."
+       REFERENCE      "RFC 4171, Section 6.4.5"
+       SYNTAX         Unsigned32 ( 1 .. 4294967295 )
+
+   IsnsIscsiNodeType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The iSCSI Node Type defines the functions of the registered
+    object.  The definitions of each setting are defined in
+    RFC 4171.
+                 Bit          Node Type
+
+              ---------       ---------
+                 29            Control
+                 30            Initiator
+                 31            Target
+              All others       RESERVED
+
+    Setting a bit to 1 indicates the node has the corresponding
+    characteristics.  The future assignment of any of the
+    reserved values will be documented in a revision of
+    RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.4.2"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           reserved24(24), reserved25(25), reserved26(26),
+           reserved27(27), reserved28(28),
+           control(29),
+           initiator(30),
+           target(31)
+                           }
+
+   IsnsFcClassOfServiceType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "This defines the Fibre Channel Class of Service types
+    that are supported by the registered port.  The
+    definitions are as defined in RFC 4171.
+          Bit              FC COS Type
+        ---------          ----------------
+           28             Fibre Channel Class 3 Supported
+           29             Fibre Channel Class 2 Supported
+        All others        RESERVED
+
+    Setting a bit to 1 indicates the class of service is
+    supported.  The future assignment of any of the
+    reserved values will be documented in a revision of
+    RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.6.8"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           reserved24(24), reserved25(25), reserved26(26),
+           reserved27(27),
+           class3(28),
+           class2(29)
+                           }
+
+   IsnsIscsiScnType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The iSCSI Node State Change Notification (SCN) values
+    for a node as defined in RFC 4171.
+             Bit                Description
+          ------------       ----------------
+           24                Initiator and self information only
+           25                Target and self information only
+           26                Management registration/SCN
+           27                Object removed
+           28                Object added
+           29                Object updated
+           30                DD or DDS member removed (Mgmt
+                             Reg/SCN only)
+           31 (Lsb)          DD or DDS member added (Mgmt
+                             Reg/SCN only)
+           All others        Reserved
+
+    Setting a bit to 1 indicates that type of SCN is enabled.
+    The future assignment of any of the reserved values will be
+    documented in a revision of RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.4.4"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           initiatorAndSelfOnly(24),
+           targetAndSelfOnly(25),
+           managementRegistrationScn(26),
+           objectRemoved(27),
+           objectAdded(28),
+           objectUpdated(29),
+           ddOrDdsMemberRemoved(30),
+           ddOrDdsMemberAdded(31)
+                           }
+
+   IsnsIfcpScnType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The iFCP State Change Notification (SCN) values for an iFCP
+    object as defined in RFC 4171.
+             Bit                Description
+          ------------       ----------------
+           24                Initiator and self information only
+           25                Target and self information only
+           26                Management registration/SCN
+           27                Object removed
+           28                Object added
+           29                Object updated
+           30                DD or DDS member removed (Mgmt
+                             Reg/SCN only)
+           31 (Lsb)          DD or DDS member added (Mgmt
+                             Reg/SCN only)
+           All others        Reserved
+
+    Setting a bit to 1 indicates that type of SCN is enabled.
+    The future assignment of any of the reserved values will be
+    documented in a revision of RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.6.12"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           initiatorAndSelfOnly(24),
+           targetAndSelfOnly(25),
+           managementRegistrationScn(26),
+           objectRemoved(27),
+           objectAdded(28),
+           objectUpdated(29),
+           ddOrDdsMemberRemoved(30),
+           ddOrDdsMemberAdded(31)
+                           }
+
+   IsnsFcPortRoleType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The FC Port Role defines the functions of the registered
+    object.  The definitions of each setting are defined in
+    RFC 4171.
+                 Bit          Port Role
+              ---------       ---------
+                 29            Control
+                 30            FCP Initiator
+                 31            FCP Target
+             All others        RESERVED
+
+    Setting a bit to 1 indicates the port has the corresponding
+    characteristics.  The future assignment of any of the
+    reserved values will be documented in a revision of
+    RFC 4171."
+       REFERENCE      "RFC 4171, Section 6.6.13"
+       SYNTAX         BITS {
+           reserved0(0), reserved1(1), reserved2(2),
+           reserved3(3), reserved4(4), reserved5(5),
+           reserved6(6), reserved7(7), reserved8(8),
+           reserved9(9), reserved10(10), reserved11(11),
+           reserved12(12), reserved13(13), reserved14(14),
+           reserved15(15), reserved16(16), reserved17(17),
+           reserved18(18), reserved19(19), reserved20(20),
+           reserved21(21), reserved22(22), reserved23(23),
+           reserved24(24), reserved25(25), reserved26(26),
+           reserved27(27), reserved28(28),
+           control(29),
+           initiator(30),
+           target(31)
+                           }
+
+   IsnsSrvrDiscoveryMethodsType ::= TEXTUAL-CONVENTION
+       STATUS         current
+       DESCRIPTION
+   "The types of iSNS Server discovery methods that are enabled
+    on an iSNS Server.  The options are DHCP, Service Location
+    Protocol (SLP), multicast group iSNS heartbeat, broadcast
+    group iSNS heartbeat, configured server list, and other.
+    The iSNS Server may support additional discovery methods
+    not indicated."
+       REFERENCE      "RFC 4171, Section 2.5"
+       SYNTAX         BITS {
+                         dhcp(0),
+                         slp(1),
+                         multicastGroupHb(2),
+                         broadcastHb(3),
+                         cfgdServerList(4),
+                         other(5)
+                               }
+
+   --
+   -- Internet Storage Name Service Management
+   --
+
+   isnsNotifications           OBJECT IDENTIFIER ::=
+                                   { isnsMIB 0 }
+   isnsObjects                 OBJECT IDENTIFIER ::=
+                                   { isnsMIB 1 }
+   isnsConformance             OBJECT IDENTIFIER ::=
+                                   { isnsMIB 2 }
+
+   --
+   -- iSNS Server instance managed objects --------------------
+   --
+
+   isnsServerInfo OBJECT IDENTIFIER ::= { isnsObjects 1 }
+
+   isnsServerTable             OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsServerEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "This table provides a list of the iSNS Server instances
+    that are managed through the same SNMP context."
+       ::= { isnsServerInfo 1 }
+
+   isnsServerEntry             OBJECT-TYPE
+       SYNTAX                  IsnsServerEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "This is a row in the iSNS Server instance table.  The number
+    of rows is dependent on the number of iSNS Server instances
+    that are being managed through the same SNMP context."
+       INDEX   { isnsServerIndex }
+       ::= { isnsServerTable 1 }
+
+   IsnsServerEntry ::=
+       SEQUENCE {
+          isnsServerIndex           Unsigned32,
+          isnsServerName            SnmpAdminString,
+          isnsServerIsnsVersion     Unsigned32,
+          isnsServerVendorInfo      SnmpAdminString,
+          isnsServerPhysicalIndex   PhysicalIndex,
+          isnsServerTcpPort         InetPortNumber,
+          isnsServerUdpPort         InetPortNumber,
+          isnsServerDiscontinuityTime
+                                    TimeStamp,
+          isnsServerRole            INTEGER,
+          isnsServerDiscoveryMethodsEnabled
+                                    IsnsSrvrDiscoveryMethodsType,
+          isnsServerDiscoveryMcGroupType
+                                    InetAddressType,
+          isnsServerDiscoveryMcGroupAddress
+                                    InetAddress,
+          isnsServerEsiNonResponseThreshold
+                                    Unsigned32,
+          isnsServerEnableControlNodeMgtScn
+                                    TruthValue,
+          isnsServerDefaultDdDdsStatus
+                                    INTEGER,
+          isnsServerUpdateDdDdsSupported
+                                    IsnsDdDdsModificationType,
+          isnsServerUpdateDdDdsEnabled
+                                    IsnsDdDdsModificationType
+                }
+
+   isnsServerIndex             OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 1 .. 4294967295 )
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "This object uniquely identifies the iSNS Server being
+    managed by the SNMP context and is the key for this table.
+    This is an instance index for each iSNS Server being
+    managed.  The value of this object is used elsewhere in
+    the MIB to reference specific iSNS Servers."
+       ::= { isnsServerEntry 1 }
+
+   isnsServerName              OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "A non-unique name that can be assigned to the iSNS Server
+    instance.  If not configured, then the string SHALL be
+    zero-length."
+       ::= { isnsServerEntry 2 }
+
+   isnsServerIsnsVersion       OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 65535 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSNS version value as contained in messages received
+    from the current primary server.  The header of each iSNSP
+    message contains the iSNS version of the sender.  If
+    unknown, the reported value is 0."
+       REFERENCE               "RFC 4171"
+       DEFVAL                  { 1 }
+       ::= { isnsServerEntry 3 }
+
+   isnsServerVendorInfo        OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "If this server instance is utilizing the product of a
+    particular 'vendor', then this managed object contains
+    that vendor's name and version.  Otherwise, the
+    string SHALL be zero-length.  The format of the string
+    is as follows: Vendor Name, Vendor Version, Vendor
+    Defined Information.
+
+          Field           Description
+        ---------       ----------------
+       Vendor Name      The name of the vendor (if one exists)
+       Vendor Version   The version of the vendor product
+       Vendor Defined   This follows the second comma in the
+                        string, if one exists, and is vendor
+                        defined
+   "
+       ::= { isnsServerEntry 4 }
+
+   isnsServerPhysicalIndex     OBJECT-TYPE
+       SYNTAX                  PhysicalIndex
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "An index identifying the network interface for this iSNS
+    Server within a network entity.  This index maps to the
+    entPhysicalIndex of entPhysicalTable table in RFC 4133.  The
+    entPhysicalClass value for the table row must be 'port', as
+    the interface must be able to send and receive data."
+       REFERENCE           "RFC 4133, RFC 4171, Section 2.5 - 2.8"
+       ::= { isnsServerEntry 5 }
+
+   isnsServerTcpPort           OBJECT-TYPE
+       SYNTAX                  InetPortNumber
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "Indicates the TCP port this iSNS instance is accepting
+    iSNSP messages on, generally the iSNS well-known port.
+    The well-known TCP port for iSNSP is 3205.  If TCP is
+    not supported by this server instance, then the value
+    is 0."
+       ::= { isnsServerEntry 6 }
+
+   isnsServerUdpPort           OBJECT-TYPE
+       SYNTAX                  InetPortNumber
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "Indicates the UDP port this iSNS instance is accepting
+    iSNSP messages on; generally, the iSNS well-known port.
+    The well-known UDP port for iSNSP is 3205.  If UDP is
+    not supported by this server instance, then the value
+    is 0."
+       ::= { isnsServerEntry 7 }
+
+   isnsServerDiscontinuityTime OBJECT-TYPE
+        SYNTAX                 TimeStamp
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+   "The value of sysUpTime on the most recent occasion that
+    this iSNS server became active or suffered a
+    discontinuity."
+       ::= { isnsServerEntry 8 }
+
+   isnsServerRole              OBJECT-TYPE
+        SYNTAX                 INTEGER { notSet(1),
+                                         server(2),
+                                         backupServer(3) }
+        MAX-ACCESS             read-only
+        STATUS                 current
+        DESCRIPTION
+   "The current operational mode of this iSNS Server instance.
+
+          Value             Description
+        ---------         ----------------
+         notSet           The iSNS Server role is not
+                          configured.
+         server           The iSNS Server instance is
+                          an operational iSNS Server.
+         backupServer     The iSNS Server instance is
+
+                          currently acting as a backup."
+       REFERENCE               "RFC 4171, Section 2.7 - 2.8"
+       ::= { isnsServerEntry 9 }
+
+   isnsServerDiscoveryMethodsEnabled  OBJECT-TYPE
+       SYNTAX                  IsnsSrvrDiscoveryMethodsType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "Indicates the discovery methods currently enabled for
+    this iSNS Server instance.  This allows a client to
+    determine what discovery methods can be used for
+    this iSNS Server.  Additional methods of discovery may
+    also be supported."
+       ::= { isnsServerEntry 10 }
+
+   isnsServerDiscoveryMcGroupType   OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Internet address in
+    isnsServerDiscoveryMcGroupAddress.  If the address is
+    specified, then it must be a valid multicast address and the
+    value of this object must be ipv4(1), ipv6(2), ipv4z(3), or
+    ipv6z(4); otherwise, the value of this object is
+    unknown(0), and the value of
+    isnsServerDiscoveryMcGroupAddress is the zero-length string."
+       ::= { isnsServerEntry 11 }
+
+   isnsServerDiscoveryMcGroupAddress  OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The multicast group that iSNS Heartbeat messages are
+    sent to if multicast-based discovery has been enabled
+    for this server instance.  If not configured, then the
+    string SHALL be zero-length.  The format of this
+    object is specified by isnsServerDiscoveryMcGroupType."
+       ::= { isnsServerEntry 12 }
+
+   isnsServerEsiNonResponseThreshold OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 65535 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "Entity Status Inquiry (ESI) Non-Response Threshold -
+
+    the number of ESI messages that will be sent without
+    receiving a response before an entity is deregistered
+    from the iSNS database.  A value of 0 indicates
+    Entities will never be deregistered due to non-receipt
+    of ESI messages."
+       REFERENCE "RFC 4171, Section 2.4"
+       DEFVAL                  { 3 }
+       ::= { isnsServerEntry 13 }
+
+   isnsServerEnableControlNodeMgtScn  OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "Indicates if the iSNS Server administrative option to send
+    Management SCNs to Control Nodes is enabled.  Management
+    SCNs are used by Control Nodes to monitor and control an
+    iSNS Server.  If enabled, Control Nodes can register to
+    receive Management SCNs."
+       REFERENCE "RFC 4171, Section 2.2.3, 2.4"
+       DEFVAL                  { true }
+       ::= { isnsServerEntry 14 }
+
+   isnsServerDefaultDdDdsStatus OBJECT-TYPE
+       SYNTAX                  INTEGER { inNoDomain(1),
+                                         inDefaultDdAndDds(2) }
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This indicates the Discovery Domain (DD) and Discovery
+    Domain Set (DDS) membership status for a new device
+    when registered in the iSNS Server instance.  Either the
+    new device will not be in a DD/DDS, or will be placed
+    into a default DD and default DDS.  The default setting
+    is inNoDomain."
+       REFERENCE "RFC 4171, Section 2.4"
+       DEFVAL                  { inNoDomain }
+       ::= { isnsServerEntry 15 }
+
+   isnsServerUpdateDdDdsSupported OBJECT-TYPE
+       SYNTAX                  IsnsDdDdsModificationType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The methods that this iSNS Server instance supports
+    to modify Discovery Domains and Discovery Domain Sets."
+       REFERENCE  "RFC 4171, Section 2.4"
+       ::= { isnsServerEntry 16 }
+
+   isnsServerUpdateDdDdsEnabled OBJECT-TYPE
+       SYNTAX                  IsnsDdDdsModificationType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This indicates the methods this server instance currently
+    allows for modifying Discovery Domains and Discovery
+    Domain Sets."
+       REFERENCE  "RFC 4171, Sec 2.2.2 and 2.4"
+       ::= { isnsServerEntry 17 }
+
+   --
+   -- Count of objects currently registered in a server instance
+   --
+
+   isnsNumObjectsTable         OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                   IsnsNumObjectsEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Table providing the number of registered objects of each
+    type in the iSNS Server instance.  The number of entries is
+    dependent upon the number of iSNS Server instances being
+    managed."
+       ::= { isnsServerInfo 2 }
+
+   isnsNumObjectsEntry         OBJECT-TYPE
+       SYNTAX                  IsnsNumObjectsEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Entry of an iSNS Server instance."
+       AUGMENTS { isnsServerEntry }
+        ::= { isnsNumObjectsTable 1 }
+
+   IsnsNumObjectsEntry ::= SEQUENCE  {
+        isnsNumDds             Gauge32,
+        isnsNumDd              Gauge32,
+        isnsNumEntities        Gauge32,
+        isnsNumPortals         Gauge32,
+        isnsNumPortalGroups    Gauge32,
+        isnsNumIscsiNodes      Gauge32,
+        isnsNumFcPorts         Gauge32,
+        isnsNumFcNodes         Gauge32
+                                      }
+
+   isnsNumDds                  OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of Discovery Domain Sets
+    in this iSNS instance.  This is the number of rows
+    in the isnsDdsTable."
+       ::= { isnsNumObjectsEntry 1 }
+
+   isnsNumDd                   OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of Discovery Domains
+    in this iSNS instance.  This is the number of rows in the
+    isnsDdTable."
+       ::= { isnsNumObjectsEntry 2 }
+
+   isnsNumEntities             OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current number of Entities registered in this
+    iSNS Server instance.  This is the number of rows in
+    the isnsRegEntityTable for this instance."
+       ::= { isnsNumObjectsEntry 3 }
+
+   isnsNumPortals              OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of Portals registered in iSNS.
+    This is the number of rows in isnsRegPortalTable."
+       ::= { isnsNumObjectsEntry 4 }
+
+   isnsNumPortalGroups         OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of Portal Groups registered in
+    iSNS.  This is the number of rows in isnsRegPgTable."
+       ::= { isnsNumObjectsEntry 5 }
+
+   isnsNumIscsiNodes           OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of iSCSI node entries registered
+    in the iSNS.  This is the number rows in
+    isnsRegIscsiNodeTable."
+       ::= { isnsNumObjectsEntry 6 }
+
+   isnsNumFcPorts              OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of FC Port entries registered
+    in the iSNS.  This is the number of rows in
+    isnsRegFcPortTable."
+       ::= { isnsNumObjectsEntry 7 }
+
+   isnsNumFcNodes              OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The current total number of FC node entries registered
+    in the iSNS.  This is the number of rows in
+    isnsRegFcNodeTable."
+       ::= { isnsNumObjectsEntry 8 }
+
+   --
+   -- Control node information
+   --
+
+   isnsControlNodeInfo     OBJECT IDENTIFIER ::=
+                                        { isnsServerInfo 3 }
+
+   --
+   -- Specific iSCSI Nodes authorized to register as Control
+   -- Nodes
+   --
+
+   isnsControlNodeIscsiTable   OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsControlNodeIscsiEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Specified iSCSI Nodes that can register or are registered
+    as control nodes.  The number of rows is dependent on the
+    number of iSCSI Control Nodes."
+       ::= { isnsControlNodeInfo 1 }
+
+   isnsControlNodeIscsiEntry      OBJECT-TYPE
+       SYNTAX                  IsnsControlNodeIscsiEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "This is an iSCSI Control Node entry for a specific iSNS
+    server instance."
+        INDEX          { isnsServerIndex,
+                         isnsControlNodeIscsiNodeIndex }
+        ::= { isnsControlNodeIscsiTable 1 }
+
+   IsnsControlNodeIscsiEntry ::= SEQUENCE {
+        isnsControlNodeIscsiNodeIndex     IsnsNodeIndexId,
+        isnsControlNodeIscsiNodeName      SnmpAdminString,
+        isnsControlNodeIscsiIsRegistered  TruthValue,
+        isnsControlNodeIscsiRcvMgtSCN     TruthValue
+                                       }
+
+   isnsControlNodeIscsiNodeIndex  OBJECT-TYPE
+       SYNTAX                  IsnsNodeIndexId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The index for the iSCSI storage node authorized to act
+    as a control node."
+        ::= { isnsControlNodeIscsiEntry 1 }
+
+   isnsControlNodeIscsiNodeName   OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSCSI Name of the initiator or target associated with
+    the storage node.  The iSCSI Name cannot be longer than
+    223 bytes.  The iSNS Server internal maximum size is 224
+    bytes to provide NULL termination.  This is the iSCSI Node
+    Name for the storage node authorized and/or acting as a
+    control node."
+        ::= { isnsControlNodeIscsiEntry 2 }
+
+   isnsControlNodeIscsiIsRegistered OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+    "Indicates whether the control node is currently
+     registered in the iSNS Server instance."
+        ::= { isnsControlNodeIscsiEntry 3 }
+
+   isnsControlNodeIscsiRcvMgtSCN  OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+    "Indicates whether the Control Node has registered to
+     receive Management SCNs.  Management SCNs are sent to
+     a Control Node if they are enabled, as indicated by
+     isnsServerEnableControlNodeMgtScn, and the Control
+     Node has registered for them."
+       REFERENCE "RFC 4171, Section 2.2.3, 2.4"
+        ::= { isnsControlNodeIscsiEntry 4 }
+
+   --
+   -- Specific FC Ports authorized to register as Control
+   -- Nodes
+   --
+
+   isnsControlNodeFcPortTable  OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsControlNodeFcPortEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Specified FC Ports that can register or are registered as
+    control nodes.  The number of rows is dependent on the
+    number of FC Port Control Nodes."
+       ::= { isnsControlNodeInfo 2 }
+
+   isnsControlNodeFcPortEntry  OBJECT-TYPE
+       SYNTAX                  IsnsControlNodeFcPortEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "FC Port control node entry."
+        INDEX          { isnsServerIndex,
+                         isnsControlNodeFcPortWwpn }
+        ::= { isnsControlNodeFcPortTable 1 }
+
+   IsnsControlNodeFcPortEntry ::= SEQUENCE  {
+        isnsControlNodeFcPortWwpn          FcNameIdOrZero,
+        isnsControlNodeFcPortIsRegistered  TruthValue,
+        isnsControlNodeFcPortRcvMgtSCN     TruthValue
+                                            }
+
+   isnsControlNodeFcPortWwpn   OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero (SIZE(8))
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port World Wide Port Name that can and/or is acting
+    as a Control Node for the specified iSNS Server.  A zero-
+    length string is not valid for this managed object.
+    This managed object, combined with the isnsServerIndex, is
+    the key for this table."
+        ::= { isnsControlNodeFcPortEntry 1 }
+
+   isnsControlNodeFcPortIsRegistered OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+    "Indicates whether the control node is currently
+     registered in the iSNS Server instance."
+        ::= { isnsControlNodeFcPortEntry 2 }
+
+   isnsControlNodeFcPortRcvMgtSCN OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+    "Indicates whether the Control Node has registered to
+     receive Management SCNs.  Management SCNs are sent to
+     a Control Node if they are enabled, as indicated by
+     isnsServerEnableControlNodeMgtScn, and the Control
+     Node has registered for them."
+       REFERENCE "RFC 4171, Section 2.2.3, 2.4"
+        ::= { isnsControlNodeFcPortEntry 3 }
+
+   --
+   -- Discovery Domain Set information
+   --
+
+   isnsDdsInfo     OBJECT IDENTIFIER ::= { isnsServerInfo 4 }
+
+   --
+   -- Discovery Domain Set Registrations -----------------
+   --
+
+   isnsDdsTable                OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsDdsEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing configuration information for each
+    Discovery Domain Set (DDS) registered in the iSNS Server
+    instance.  The number of rows in the table is dependent
+    on the number of DDSs registered in the specified iSNS
+    server instance."
+       ::= { isnsDdsInfo 1 }
+
+   isnsDdsEntry                OBJECT-TYPE
+       SYNTAX                  IsnsDdsEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one Discovery Domain Set (DDS) registered
+    in the iSNS Server instance."
+       INDEX   { isnsServerIndex, isnsDdsId}
+       ::= { isnsDdsTable 1 }
+
+   IsnsDdsEntry ::=
+       SEQUENCE {
+          isnsDdsId             IsnsDiscoveryDomainSetId,
+          isnsDdsSymbolicName   SnmpAdminString,
+          isnsDdsStatus         IsnsDdsStatusType
+                }
+
+   isnsDdsId                   OBJECT-TYPE
+       SYNTAX                  IsnsDiscoveryDomainSetId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The ID that refers to this Discovery Domain Set and
+    index to the table."
+       ::= { isnsDdsEntry 1 }
+
+   isnsDdsSymbolicName         OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Discovery Domain Set Symbolic Name field contains
+    a unique variable-length description (up to 255 bytes)
+    that is associated with the DDS.  If a Symbolic Name is
+    not provided, then one will be generated by the iSNS
+    server."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdsEntry 2 }
+
+   isnsDdsStatus               OBJECT-TYPE
+       SYNTAX                  IsnsDdsStatusType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The status of this Discovery Domain Set (DDS)."
+       REFERENCE "RFC 4171, Section 6.11.1.3"
+       ::= { isnsDdsEntry 3 }
+
+   --
+   -- Discovery Domain Set Members --------------------
+   --
+
+   --
+   -- DDS Membership Assignment
+   --
+
+   isnsDdsMemberTable          OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsDdsMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing Discovery Domains (DDs) that have
+    been assigned to specific Discovery Domain Sets (DDSs).
+    The number of rows in the table is dependent on the
+    number of DD to DDS relationships in the iSNS instance."
+       ::= { isnsDdsInfo 2 }
+
+   isnsDdsMemberEntry          OBJECT-TYPE
+       SYNTAX                  IsnsDdsMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The mapping of one Discovery Domain (DD) to a Discovery
+    Domain Set (DDS).  This indicates the DD is a member of
+    the DDS."
+       INDEX   { isnsServerIndex,
+                 isnsDdsId,
+                 isnsDdsMemberDdId }
+       ::= { isnsDdsMemberTable 1 }
+
+   IsnsDdsMemberEntry ::=
+       SEQUENCE {
+          isnsDdsMemberDdId       IsnsDiscoveryDomainId,
+          isnsDdsMemberSymbolicName SnmpAdminString
+
+                }
+
+   isnsDdsMemberDdId           OBJECT-TYPE
+       SYNTAX                  IsnsDiscoveryDomainId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The ID that identifies the Discovery Domain
+    that is a member of the Discovery Domain Set."
+       ::= { isnsDdsMemberEntry 1 }
+
+   isnsDdsMemberSymbolicName   OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Symbolic Name of the Discovery Domain that is a member
+    of this DDS.  This value SHALL be identical to the object
+    isnsDdSymbolicName for the associated DD ID."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdsMemberEntry 2 }
+
+   --
+   -- Discovery Domain information
+   --
+
+   isnsDdInfo     OBJECT IDENTIFIER ::= { isnsServerInfo 5 }
+
+   --
+   -- Discovery Domain Registrations ------------------------
+   --
+
+   isnsDdTable                 OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsDdEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing configuration information for each
+    Discovery Domain (DD) registered in the iSNS.  The number
+    of rows in the table is dependent on the number of DDs
+    registered in the iSNS instance."
+       ::= { isnsDdInfo 1 }
+
+   isnsDdEntry                 OBJECT-TYPE
+       SYNTAX                  IsnsDdEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on a Discovery Domain (DD) registered in
+    the iSNS Server instance."
+       INDEX   { isnsServerIndex, isnsDdId}
+       ::= { isnsDdTable 1 }
+
+   IsnsDdEntry::=
+       SEQUENCE {
+          isnsDdId             IsnsDiscoveryDomainId,
+          isnsDdSymbolicName   SnmpAdminString,
+          isnsDdFeatures       IsnsDdFeatureType
+                }
+
+   isnsDdId                    OBJECT-TYPE
+       SYNTAX                  IsnsDiscoveryDomainId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The ID that refers to this Discovery Domain, and the
+    index to the table."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdEntry 1 }
+
+   isnsDdSymbolicName          OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Discovery Domain Symbolic Name field contains a
+    unique variable-length description (up to 255 bytes)
+    that is associated with the DD."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdEntry 2 }
+
+   isnsDdFeatures              OBJECT-TYPE
+       SYNTAX                  IsnsDdFeatureType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This defines the features the Discovery Domain has."
+       REFERENCE "RFC 4171, Section 6.11.2.9"
+       ::= { isnsDdEntry 3 }
+
+   --
+   -- Discovery Domain Members --------------------
+   --
+
+   --
+   -- DD iSCSI Node Membership Assignment
+   --
+
+   isnsDdIscsiMemberTable      OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsDdIscsiMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing iSCSI node indexes that have been
+    assigned to specific DDs in this iSNS Server instance.  The
+    number of rows in the table is dependent on the number of
+    relationships between iSCSI Nodes and DDs registered in the
+    iSNS instance."
+       ::= { isnsDdInfo 2 }
+
+   isnsDdIscsiMemberEntry      OBJECT-TYPE
+       SYNTAX                  IsnsDdIscsiMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The mapping of one iSCSI Node to a Discovery Domain to
+    indicate membership in the DD.  The indexes are the iSNS
+    server instance, the DD ID of the Discovery Domain, and
+    the iSCSI Node Index of the iSCSI Node."
+       INDEX   { isnsServerIndex,
+                 isnsDdId,
+                 isnsDdIscsiMemberIndex }
+       ::= { isnsDdIscsiMemberTable 1 }
+
+   IsnsDdIscsiMemberEntry::=
+       SEQUENCE {
+          isnsDdIscsiMemberIndex   IsnsNodeIndexId,
+          isnsDdIscsiMemberName    SnmpAdminString,
+          isnsDdIscsiMemberIsRegistered TruthValue
+                }
+
+   isnsDdIscsiMemberIndex      OBJECT-TYPE
+       SYNTAX                  IsnsNodeIndexId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The index for this member iSCSI node entry."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdIscsiMemberEntry 1 }
+
+   isnsDdIscsiMemberName       OBJECT-TYPE
+       SYNTAX                  SnmpAdminString (SIZE (0..223))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSCSI Name associated with the storage node.  The
+    iSCSI Name cannot be longer than 223 bytes.  The iSNS
+    server internal maximum size is 224 bytes to provide
+    NULL termination.  This is the iSCSI Name for the storage
+    node that is a member of the DD.  This value maps 1 to 1
+    to the isnsDdIscsiMemberIndex node index.  The iSCSI Name
+    field is too long to be easily used for an index directly.
+    The node index used for a specific node name is only
+    persistent across iSNS Server reinitializations for nodes
+    that are in a Discovery Domain (DD) or are registered
+    control nodes.  This value is only required during row
+    creation if the storage node is not yet registered in the
+    iSNS Server instance.  If the storage node is not yet
+    registered, then the iSCSI Name MUST be provided with the
+    iSCSI node index during row creation in order to create the
+    1-to-1 mapping."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdIscsiMemberEntry 2 }
+
+   isnsDdIscsiMemberIsRegistered OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This indicates whether this member of the DD is currently
+    registered in the iSNS Server instance.  iSCSI Storage
+    Node members do not need to be currently registered in
+    order for their iSCSI Name and Index to be added to
+    a DD."
+       REFERENCE "RFC 4171, Section 6.11"
+       ::= { isnsDdIscsiMemberEntry 3 }
+
+   --
+   -- DD Portal Membership Assignment
+   --
+
+   isnsDdPortalMemberTable     OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsDdPortalMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing currently registered and unregistered
+    portal objects that have been explicitly assigned to
+    specific DDs.  Explicit assignment of a portal to a DD
+    is only done when a specific set of portals are preferred
+    for use within a DD.  Otherwise, for iSCSI, the Portal
+    Group Object should be used for identifying which portals
+    provide access to which storage nodes.  The number of rows
+    in the table is dependent on the number of explicit
+    relationships between portals and DDs registered in the
+    iSNS."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdInfo 3 }
+
+   isnsDdPortalMemberEntry     OBJECT-TYPE
+       SYNTAX                  IsnsDdPortalMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Each entry indicates an explicit addition of a portal to a
+    discovery domain.  The explicit addition of an entity portal
+    to a discovery domain indicates the portal is preferred for
+    access to nodes of the entity for this discovery domain.
+    Registered Portal Group objects are used in iSCSI to
+    indicate mapping of portals to nodes across all discovery
+    domains.  Portals that have been explicitly mapped to a
+    discovery domain will be returned as part of a query that
+    is scoped to that discovery domain.  If no portal of an
+    entity has been explicitly mapped to a discovery domain,
+    then all portals of the entity that provide access to a
+    storage node are returned as part of a query.  The table
+    indexes are the server instance, the DD ID of the Discovery
+    Domain, and the Portal Index of the portal."
+       INDEX   { isnsServerIndex,
+                 isnsDdId,
+                 isnsDdPortalMemberIndex }
+       ::= { isnsDdPortalMemberTable 1 }
+
+   IsnsDdPortalMemberEntry ::=
+       SEQUENCE {
+          isnsDdPortalMemberIndex        IsnsPortalIndexId,
+          isnsDdPortalMemberAddressType  InetAddressType,
+          isnsDdPortalMemberAddress      InetAddress,
+          isnsDdPortalMemberPortType     IsnsPortalPortTypeId,
+          isnsDdPortalMemberPort         InetPortNumber,
+          isnsDdPortalMemberIsRegistered TruthValue
+                }
+
+   isnsDdPortalMemberIndex     OBJECT-TYPE
+       SYNTAX                  IsnsPortalIndexId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The index for a portal explicitly contained in the discovery
+    domain.  This managed object, combined with isnsServerIndex
+    and isnsDdId, is the key for this table."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdPortalMemberEntry 1 }
+
+   isnsDdPortalMemberAddressType  OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsDdPortalMemberAddress.  If
+    the address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value
+    of this object is unknown(0), and the value of
+    isnsDdPortalMemberAddress is the zero-length string."
+       ::= { isnsDdPortalMemberEntry 2 }
+
+   isnsDdPortalMemberAddress   OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Inet Address for the portal.  The format of this
+    object is specified by isnsDdPortalMemberAddressType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdPortalMemberEntry 3 }
+
+   isnsDdPortalMemberPortType  OBJECT-TYPE
+       SYNTAX                  IsnsPortalPortTypeId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port type for the portal, either UDP or TCP."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdPortalMemberEntry 4 }
+
+   isnsDdPortalMemberPort      OBJECT-TYPE
+       SYNTAX                  InetPortNumber ( 1 .. 65535 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port number for the portal.  Whether the portal
+    type is TCP or UDP is indicated by
+    isnsDdPortalMemberPortType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdPortalMemberEntry 5 }
+
+   isnsDdPortalMemberIsRegistered OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This indicates whether this member of the DD is currently
+    registered in the iSNS Server instance.  Portals that are
+    DD members do not need to be currently registered in
+    order for them to be added to a DD."
+       REFERENCE "RFC 4171, Section 6.11"
+       ::= { isnsDdPortalMemberEntry 6 }
+
+   --
+   -- DD FC Port Membership Assignment
+   --
+
+   isnsDdFcPortMemberTable     OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsDdFcPortMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing FC Port World Wide Names (WWN) that
+    have been assigned to specific DDs.  The number of rows
+    in the table is dependent on the number of relationships
+    between FC Ports and DDs registered in the iSNS."
+       ::= { isnsDdInfo 4 }
+
+   isnsDdFcPortMemberEntry     OBJECT-TYPE
+       SYNTAX                  IsnsDdFcPortMemberEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The association of one FC Port with a Discovery Domain.
+    Membership of an FC Port in a Discovery Domain is
+    indicated by creating a row for the appropriate DD ID
+    and FC Port WWN."
+       INDEX   { isnsServerIndex,
+                 isnsDdId,
+                 isnsDdFcPortMemberPortName }
+       ::= { isnsDdFcPortMemberTable 1 }
+
+   IsnsDdFcPortMemberEntry ::=
+       SEQUENCE {
+          isnsDdFcPortMemberPortName FcNameIdOrZero,
+          isnsDdFcPortMemberIsRegistered TruthValue
+       }
+
+   isnsDdFcPortMemberPortName  OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero (SIZE(8))
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The Port WWN of the FC Port that is a member of the DD.  The
+    value MUST be a valid FC WWN, as per the FC-GS (Fibre Channel -
+    Generic Services) standard.  This managed object, combined
+    with the isnsServerIndex and isnsDdId are the key for this
+    table.  A zero-length string is not a valid value for this
+    managed object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsDdFcPortMemberEntry 1 }
+
+   isnsDdFcPortMemberIsRegistered OBJECT-TYPE
+       SYNTAX                  TruthValue
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This indicates whether this member of the DD is currently
+    registered in the iSNS Server instance."
+       REFERENCE "RFC 4171, Section 6.11"
+       ::= { isnsDdFcPortMemberEntry 2 }
+
+   --
+   --  Registered Device Information
+   --
+
+   isnsReg    OBJECT IDENTIFIER ::= { isnsServerInfo 6 }
+
+   isnsRegEntityInfo           OBJECT IDENTIFIER
+                                  ::= { isnsReg    1 }
+
+   --
+   -- iSNS Registered Entities Table
+   --
+
+   isnsRegEntityTable          OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsRegEntityEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing registered Entity objects in each iSNS
+    server instance.  The number of entries in the table is
+    dependent on the number of Entity objects registered in the
+    iSNS Server instances.  All Entity objects are registered in
+    the iSNS using the iSNS protocol."
+       ::= { isnsRegEntityInfo 1 }
+
+   isnsRegEntityEntry          OBJECT-TYPE
+       SYNTAX                  IsnsRegEntityEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one registered Entity object in an iSNS
+    server instance."
+       INDEX   { isnsServerIndex,
+                 isnsRegEntityIndex }
+       ::= { isnsRegEntityTable 1 }
+
+   IsnsRegEntityEntry ::=
+       SEQUENCE {
+          isnsRegEntityIndex          IsnsEntityIndexIdOrZero,
+          isnsRegEntityEID            SnmpAdminString,
+          isnsRegEntityProtocol       Unsigned32,
+          isnsRegEntityManagementAddressType
+                                      InetAddressType,
+          isnsRegEntityManagementAddress
+                                      InetAddress,
+          isnsRegEntityTimestamp      TimeStamp,
+          isnsRegEntityVersionMin     Unsigned32,
+          isnsRegEntityVersionMax     Unsigned32,
+          isnsRegEntityRegistrationPeriod
+                                      Unsigned32
+               }
+
+   isnsRegEntityIndex          OBJECT-TYPE
+       SYNTAX                  IsnsEntityIndexIdOrZero
+                                      ( 1 .. 4294967295 )
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The Entity Index for this entity.  This index is assigned
+    by the iSNS Server when an Entity is initially registered.
+    The Entity Index can be used to represent a registered
+    Entity object in situations where the Entity EID would
+    be too long/unwieldy.  Zero is not a valid value for this
+    object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegEntityEntry 1 }
+
+   isnsRegEntityEID            OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The EID is a unique registered Entity object identifier, as
+    specified in the iSNS Specification.  This is the iSNS
+    Entity Identifier for the registered Entity object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegEntityEntry 2 }
+
+   isnsRegEntityProtocol       OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 1 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The block storage protocol supported by this entity, as
+    defined in the iSNS Specification, Section 6.2.2.  The
+    following values are initially assigned.
+
+              Type Value       Entity Type
+              ----------       -----------
+                 1             No Protocol
+                 2             iSCSI
+                 3             iFCP
+               All Others      As assigned by IANA
+
+    The full set of current Block Storage Protocols are
+    specified in the IANA-maintained registry of assigned
+    iSNS parameters.  Please refer to RFC 4171 and the iSNS
+    parameters maintained at IANA."
+       REFERENCE  "RFC 4171, Section 6.2.2, and IANA Assignments"
+       ::= { isnsRegEntityEntry 3 }
+
+   isnsRegEntityManagementAddressType OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsRegEntityManagementAddress.
+    If the address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of
+    this object is unknown(0), and the value of
+    isnsRegEntityManagementAddress is the zero-length string."
+       ::= { isnsRegEntityEntry 4 }
+
+   isnsRegEntityManagementAddress OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSNS Management IP Address for the registered Entity
+    object.  The format of this object is specified by
+    isnsRegEntityManagementAddressType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegEntityEntry 5 }
+
+   isnsRegEntityTimestamp      OBJECT-TYPE
+       SYNTAX                  TimeStamp
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSNS Entity Registration Timestamp for the registered
+    Entity object.  This is the most recent date and time that
+    the registered Entity object, and associated registered
+    objects contained in the Entity, were registered or
+    updated."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegEntityEntry 6 }
+
+   isnsRegEntityVersionMin     OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 254 | 255 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The minimum version supported for the block storage protocol
+    specified by isnsRegEntityProtocol.  The protocol version
+    specified can be from 1 to 254.  A value of 255 is a wildcard
+    value, indicating no minimum version value has been specified
+    for this Entity.  Entity registrations with an
+    isnsRegEntityProtocol of 'No Protocol' SHALL have an
+    isnsRegEntityVersionMin value of 0."
+       REFERENCE "RFC 4171, Section 6.2.5"
+       ::= { isnsRegEntityEntry 7 }
+
+   isnsRegEntityVersionMax     OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 254 | 255 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The maximum version supported for the block storage protocol
+    specified by isnsRegEntityProtocol.  The protocol version
+    specified can be from 1 to 254.  A value of 255 is a wildcard
+
+    value, indicating no maximum version value has been specified
+    for this Entity.  Entity registrations with an
+    isnsRegEntityProtocol of 'No Protocol' SHALL have an
+    isnsRegEntityVersionMax value of 0."
+       REFERENCE "RFC 4171, Section 6.2.5"
+       ::= { isnsRegEntityEntry 8 }
+
+   isnsRegEntityRegistrationPeriod OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 4294967295 )
+       UNITS                   "seconds"
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSNS Entity Status Inquiry (ESI) registration period,
+    which indicates the maximum time, in seconds, that the
+    registration will be maintained without receipt of an iSNSP
+    message from the entity.  If the Registration Period is set
+    to 0, then the Entity SHALL NOT be deregistered due to no
+    contact with the entity."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegEntityEntry 9 }
+
+   --
+   -- Registered Objects Associated With an Entity Information
+   --
+
+   isnsRegEntityNumObjectsTable    OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsRegEntityNumObjectsEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing information on the number of registered
+    objects associated with a registered Entity in the iSNS
+    server instance.  The number of entries in the table is
+    dependent on the number of registered Entity objects in the
+    iSNS."
+       ::= { isnsRegEntityInfo 2 }
+
+   isnsRegEntityNumObjectsEntry    OBJECT-TYPE
+       SYNTAX                  IsnsRegEntityNumObjectsEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on the number of registered objects associated
+    with a registered Entity object in an iSNS Server instance."
+       INDEX   { isnsServerIndex,
+                 isnsRegEntityIndex }
+       ::= { isnsRegEntityNumObjectsTable 1 }
+
+   IsnsRegEntityNumObjectsEntry ::=
+       SEQUENCE {
+          isnsRegEntityInfoNumPortals      Gauge32,
+          isnsRegEntityInfoNumPortalGroups Gauge32,
+          isnsRegEntityInfoNumIscsiNodes   Gauge32,
+          isnsRegEntityInfoNumFcPorts      Gauge32,
+          isnsRegEntityInfoNumFcNodes      Gauge32
+               }
+
+   isnsRegEntityInfoNumPortals OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The number of Portals associated with this Entity."
+       ::= { isnsRegEntityNumObjectsEntry 1 }
+
+   isnsRegEntityInfoNumPortalGroups OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The number of Portal Groups associated with this Entity."
+       ::= { isnsRegEntityNumObjectsEntry 2 }
+
+   isnsRegEntityInfoNumIscsiNodes OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The number of iSCSI Storage Nodes associated with this
+    Entity."
+       ::= { isnsRegEntityNumObjectsEntry 3 }
+
+   isnsRegEntityInfoNumFcPorts OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The number of FC Ports associated with this Entity."
+       ::= { isnsRegEntityNumObjectsEntry 4 }
+
+   isnsRegEntityInfoNumFcNodes OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The number of FC Nodes associated with this Entity."
+       ::= { isnsRegEntityNumObjectsEntry 5 }
+
+   --
+   -- iSNS Registered Portal Information
+   --
+
+   isnsRegPortalInfo           OBJECT IDENTIFIER
+                                  ::= { isnsReg  2 }
+
+   --
+   -- iSNS Registered Portal Table
+   --
+
+   isnsRegPortalTable          OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsRegPortalEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing the registered Portals in the iSNS.
+    The number of entries is dependent on the number of
+    Portals registered in the iSNS."
+       ::= { isnsRegPortalInfo 1 }
+
+   isnsRegPortalEntry          OBJECT-TYPE
+       SYNTAX                  IsnsRegPortalEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one registered Entity Portal in the iSNS.
+    The Entity Index is part of the table index to quickly
+    find Portals that support a specific Entity."
+       INDEX   { isnsServerIndex,
+                 isnsRegEntityIndex,
+                 isnsRegPortalPortalIndex }
+       ::= { isnsRegPortalTable 1 }
+
+   IsnsRegPortalEntry ::=
+       SEQUENCE {
+          isnsRegPortalPortalIndex    IsnsPortalIndexId,
+          isnsRegPortalAddressType    InetAddressType,
+          isnsRegPortalAddress        InetAddress,
+          isnsRegPortalPortType       IsnsPortalPortTypeId,
+          isnsRegPortalPort           InetPortNumber,
+          isnsRegPortalSymbolicName   SnmpAdminString,
+          isnsRegPortalEsiInterval    Unsigned32,
+          isnsRegPortalEsiPortType    IsnsPortalPortTypeId,
+          isnsRegPortalEsiPort        InetPortNumber,
+          isnsRegPortalScnPortType    IsnsPortalPortTypeId,
+          isnsRegPortalScnPort        InetPortNumber,
+          isnsRegPortalSecurityInfo   IsnsPortalSecurityType
+               }
+
+   isnsRegPortalPortalIndex    OBJECT-TYPE
+       SYNTAX                  IsnsPortalIndexId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The index for this Entity Portal."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 1 }
+
+   isnsRegPortalAddressType    OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsRegPortalAddress.  If the
+    address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value
+    of this object is unknown(0), and the value of
+    isnsRegPortalAddress is the zero-length string."
+       ::= { isnsRegPortalEntry 2 }
+
+   isnsRegPortalAddress        OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Inet Address for this Portal as defined in the iSNS
+    Specification, RFC 4171.  The format of this object is
+    specified by isnsRegPortalAddressType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 3 }
+
+   isnsRegPortalPortType       OBJECT-TYPE
+       SYNTAX                  IsnsPortalPortTypeId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port type for this Portal, either UDP or TCP, as
+    defined in the iSNS Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 4 }
+
+   isnsRegPortalPort           OBJECT-TYPE
+       SYNTAX                  InetPortNumber ( 1 .. 65535 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port number for this Portal as defined in the
+    iSNS Specification, RFC 4171.  Whether the Portal type
+    is TCP or UDP is indicated by isnsRegPortalPortType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 5 }
+
+   isnsRegPortalSymbolicName   OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Symbolic Name for this Portal as defined in the iSNS
+    Specification, RFC 4171.  If not provided, then the string
+    SHALL be zero-length."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 6 }
+
+   isnsRegPortalEsiInterval    OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 65535 )
+       UNITS                   "seconds"
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Entity Status Inquiry (ESI) Interval for this Portal
+    as defined in the iSNS Specification, RFC 4171.  A value of
+    0 indicates that ESI monitoring has not been configured for
+    this Portal."
+       REFERENCE "RFC 4171, Section 6.3.4"
+       ::= { isnsRegPortalEntry 7 }
+
+   isnsRegPortalEsiPortType    OBJECT-TYPE
+       SYNTAX                  IsnsPortalPortTypeId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port type for the ESI Port, either UDP or TCP, as
+    defined in the iSNS Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 8 }
+
+   isnsRegPortalEsiPort        OBJECT-TYPE
+       SYNTAX                  InetPortNumber
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The TCP or UDP port number used for ESI monitoring.  Whether
+    the port type is TCP or UDP is indicated by
+    isnsRegPortalEsiPortType.  A value of 0 indicates that ESI
+    monitoring is not enabled for this Portal."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 9 }
+
+   isnsRegPortalScnPortType    OBJECT-TYPE
+       SYNTAX                  IsnsPortalPortTypeId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port type for the SCN Port, either UDP or TCP, as
+    defined in the iSNS Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 10 }
+
+   isnsRegPortalScnPort        OBJECT-TYPE
+       SYNTAX                  InetPortNumber
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The TCP or UDP port used to receive SCN messages from the
+    iSNS Server.  Whether the port type is TCP or UDP is
+    indicated by isnsRegPortalScnPortType.  A value of 0
+    indicates that SCN message receipt is not enabled for this
+    Portal."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPortalEntry 11 }
+
+   isnsRegPortalSecurityInfo   OBJECT-TYPE
+       SYNTAX                  IsnsPortalSecurityType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "Indicates security attribute settings for the Portal as
+    registered in the iSNS server.  The bit for bitmapVALID must
+    be set in order for this attribute to contain valid
+    information.  Setting a bit to 1 indicates the
+    feature is enabled."
+       REFERENCE "RFC 4171, Section 6.3.9"
+       ::= { isnsRegPortalEntry 12 }
+
+   --
+   -- iSNS Registered Portal Group Information
+   --
+
+   isnsRegPortalGroupInfo      OBJECT IDENTIFIER
+                                  ::= { isnsReg  3 }
+
+   --
+   -- iSNS Registered Portal Group (PG) Table
+   --
+
+   isnsRegPgTable              OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsRegPgEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing the registered Portal Groups (PGs) in
+    the iSNS Server instance.  The number of entries is
+    dependent on the number of Portal Groups registered in
+    the iSNS."
+       ::= { isnsRegPortalGroupInfo 1 }
+
+   isnsRegPgEntry              OBJECT-TYPE
+       SYNTAX                  IsnsRegPgEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one registered Portal Group in the iSNS
+    server instance.  The Entity Index is part of the table
+    index to quickly find Portal Groups that support Portals
+    and iSCSI Storage Nodes in a specific Entity."
+       INDEX   { isnsServerIndex,
+                 isnsRegEntityIndex,
+                 isnsRegPgIndex }
+       ::= { isnsRegPgTable 1 }
+
+   IsnsRegPgEntry ::=
+       SEQUENCE {
+          isnsRegPgIndex              IsnsPortalGroupIndexId,
+          isnsRegPgIscsiNodeIndex     IsnsNodeIndexId,
+          isnsRegPgIscsiName          SnmpAdminString,
+          isnsRegPgPortalPortalIndex  IsnsPortalIndexId,
+          isnsRegPgPortalAddressType  InetAddressType,
+          isnsRegPgPortalAddress      InetAddress,
+          isnsRegPgPortalPortType     IsnsPortalPortTypeId,
+          isnsRegPgPortalPort         InetPortNumber,
+          isnsRegPgPGT                IsnsPortalGroupTagIdOrNull
+                }
+
+   isnsRegPgIndex              OBJECT-TYPE
+       SYNTAX                  IsnsPortalGroupIndexId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The PG Index for this node.  The index is created by the
+    iSNS Server instance for uniquely identifying registered
+    objects.  The PG object is registered at the same time a
+    Portal or Storage Node is registered using the iSNS
+    protocol."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPgEntry 1 }
+
+   isnsRegPgIscsiNodeIndex     OBJECT-TYPE
+       SYNTAX                  IsnsNodeIndexId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The index for the iSCSI Node associated with this PG.
+    This index can be used to reference the
+    isnsRegIscsiNodeTable."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPgEntry 2 }
+
+   isnsRegPgIscsiName          OBJECT-TYPE
+       SYNTAX                  SnmpAdminString (SIZE (0..223))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSCSI Name of the initiator or target associated with
+    the storage node.  The iSCSI Name cannot be longer than
+    223 bytes.  The iSNS Server internal maximum size is 224
+    bytes to provide NULL termination.  This is the PG iSCSI
+    Name that uniquely identifies the iSCSI Storage Node that
+    is associated with this PG."
+       ::= { isnsRegPgEntry 3 }
+
+   isnsRegPgPortalPortalIndex  OBJECT-TYPE
+       SYNTAX                  IsnsPortalIndexId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Portal Index for the Portal associated with this PG.
+    This index can be used to reference the isnsRegPortalTable."
+       ::= { isnsRegPgEntry 4 }
+
+   isnsRegPgPortalAddressType  OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsRegPgPortalAddress.  If
+    the address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value
+    of this object is unknown(0), and the value of
+    isnsRegPgPortalAddress is the zero-length string."
+       ::= { isnsRegPgEntry 5 }
+
+   isnsRegPgPortalAddress      OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Inet Address for the Portal that is associated with
+    the PG.  The format of this object is specified by
+    isnsRegPgPortalAddressType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPgEntry 6 }
+
+   isnsRegPgPortalPortType     OBJECT-TYPE
+       SYNTAX                  IsnsPortalPortTypeId
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port type, either UDP or TCP, for the Portal that
+    is associated with this registered PG object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPgEntry 7 }
+
+   isnsRegPgPortalPort         OBJECT-TYPE
+       SYNTAX                  InetPortNumber ( 1 .. 65535 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The port number for the Portal that is associated with
+    this registered PG object.  Whether the Portal type is
+    TCP or UDP is indicated by isnsRegPgPortalPortType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegPgEntry 8 }
+
+   isnsRegPgPGT                OBJECT-TYPE
+       SYNTAX                  IsnsPortalGroupTagIdOrNull
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Portal Group Tag (PGT) for the registered iSCSI Portal
+    Group object in an iSNS Server instance.  This indicates
+    the tag value that the Portal uses for access to the iSCSI
+    Storage Node.  The PGT is used for coordinated access
+    between multiple Portals, as described in the iSCSI
+    Specification, RFC 3720.  A PGT with no association is a
+    NULL value.  The value of -1 indicates a NULL value."
+       REFERENCE "RFC 4171, Section 6, and RFC 3720"
+       ::= { isnsRegPgEntry 9 }
+
+   --
+   -- iSNS Registered iSCSI Node Information
+   --
+
+   isnsRegIscsiNodeInfo  OBJECT IDENTIFIER ::= { isnsReg  4 }
+
+   --
+   -- iSNS Registered iSCSI Node Table
+   --
+
+   isnsRegIscsiNodeTable       OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsRegIscsiNodeEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing the registered iSCSI Nodes in the iSNS
+    server instance.  Storage devices register using the iSNS
+    protocol.  While a device cannot be registered in an iSNS
+    server using SNMP, an entry can be deleted in order to
+    remove 'stale' entries.  The number of entries is related
+    to the number of iSCSI nodes registered in the iSNS."
+       ::= { isnsRegIscsiNodeInfo 1 }
+
+   isnsRegIscsiNodeEntry       OBJECT-TYPE
+       SYNTAX                  IsnsRegIscsiNodeEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one iSCSI node that has been registered in
+    the iSNS Server instance.  New rows cannot be added using
+    SNMP."
+       INDEX { isnsServerIndex,
+               isnsRegEntityIndex,
+               isnsRegIscsiNodeIndex }
+       ::= { isnsRegIscsiNodeTable 1 }
+
+   IsnsRegIscsiNodeEntry ::= SEQUENCE {
+
+       isnsRegIscsiNodeIndex          IsnsNodeIndexId,
+       isnsRegIscsiNodeName           SnmpAdminString,
+       isnsRegIscsiNodeType           IsnsIscsiNodeType,
+       isnsRegIscsiNodeAlias          SnmpAdminString,
+       isnsRegIscsiNodeScnTypes       IsnsIscsiScnType,
+       isnsRegIscsiNodeWwnToken       FcNameIdOrZero,
+       isnsRegIscsiNodeAuthMethod     SnmpAdminString
+                                    }
+
+   isnsRegIscsiNodeIndex       OBJECT-TYPE
+       SYNTAX                  IsnsNodeIndexId
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The index for this iSCSI node."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegIscsiNodeEntry 1 }
+
+   isnsRegIscsiNodeName        OBJECT-TYPE
+       SYNTAX                  SnmpAdminString (SIZE (0..223))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSCSI Name of the initiator or target associated with
+    the storage node.  The iSCSI Name cannot be longer than
+    223 bytes.  The iSNS Server internal maximum size is 224
+    bytes to provide NULL termination.  This is the iSCSI Name
+    that uniquely identifies the initiator, initiator/target,
+    target, or control node in the network."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegIscsiNodeEntry 2 }
+
+   isnsRegIscsiNodeType        OBJECT-TYPE
+       SYNTAX                  IsnsIscsiNodeType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Node Type defining the functions of this iSCSI node."
+       ::= { isnsRegIscsiNodeEntry 3 }
+
+   isnsRegIscsiNodeAlias       OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Alias name of the iSCSI node.  This is a variable-length
+    text-based description of up to 255 bytes."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegIscsiNodeEntry 4 }
+
+   isnsRegIscsiNodeScnTypes    OBJECT-TYPE
+       SYNTAX                  IsnsIscsiScnType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The State Change Notification (SCN) types enabled for this
+    iSCSI node."
+       REFERENCE "RFC 4171, Section 6.4.4"
+       ::= { isnsRegIscsiNodeEntry 5 }
+
+   isnsRegIscsiNodeWwnToken    OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This contains a globally unique 64-bit integer value that
+    can be used to represent the World Wide Node Name of the
+    iSCSI device in a Fibre Channel fabric.  This identifier is
+    used during the device registration process, and MUST
+    conform to the requirements in RFC 4171.  A zero-length string
+    for this managed object indicates that a Node WWN token has
+    not been assigned."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegIscsiNodeEntry 6 }
+
+   isnsRegIscsiNodeAuthMethod  OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This attribute contains a null-terminated string containing
+    UTF-8 text listing the iSCSI authentication methods enabled
+    for this iSCSI Node, in order of preference.  The text
+    values used to identify iSCSI authentication methods are
+    embedded in this string attribute and delineated by a
+    comma.  The text values are identical to those found in
+    RFC 3720 - iSCSI.  Additional vendor-specific text values
+    are also possible."
+       REFERENCE "RFC 4171, Section 6, and RFC 3720"
+       ::= { isnsRegIscsiNodeEntry 7 }
+
+   --
+   -- iSNS Registered FC Node Information
+   --
+
+   isnsRegFcNodeInfo     OBJECT IDENTIFIER ::= { isnsReg  5 }
+
+   --
+   -- iSNS Registered FC Node Table
+   --
+
+   isnsRegFcNodeTable          OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsRegFcNodeEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing the registered FC Nodes in the iSNS.
+    This supports iFCP as defined in RFC 4172."
+       ::= { isnsRegFcNodeInfo 1 }
+
+   isnsRegFcNodeEntry          OBJECT-TYPE
+       SYNTAX                  IsnsRegFcNodeEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one registered FC node that has been
+    registered in the iSNS."
+       INDEX { isnsServerIndex,
+                isnsRegFcNodeWwnn }
+       ::= { isnsRegFcNodeTable 1 }
+
+   IsnsRegFcNodeEntry ::= SEQUENCE {
+       isnsRegFcNodeWwnn           FcNameIdOrZero,
+       isnsRegFcNodeSymbolicName   SnmpAdminString,
+       isnsRegFcNodeAddressType    InetAddressType,
+       isnsRegFcNodeAddress        InetAddress,
+       isnsRegFcNodeIPA            OCTET STRING,
+       isnsRegFcNodeProxyIscsiName SnmpAdminString,
+       isnsRegFcNodeNumFcPorts     Gauge32
+                                   }
+
+   isnsRegFcNodeWwnn           OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero (SIZE(8))
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The FC Node World Wide Node Name as defined in the iSNS
+    Specification, RFC 4171.  A zero-length string is not valid
+    for this managed object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcNodeEntry 1 }
+
+   isnsRegFcNodeSymbolicName   OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Node Symbolic Name of the node as defined in the
+    iSNS Specification, RFC 4171.  This is a variable-length
+    text-based description.  If not provided, then the string
+    SHALL be zero-length."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcNodeEntry 2 }
+
+   isnsRegFcNodeAddressType    OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsRegFcNodeAddress.  If
+    the address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value
+    of this object is unknown(0), and the value of
+    isnsRegFcNodeAddress is the zero-length string."
+       ::= { isnsRegFcNodeEntry 3 }
+
+   isnsRegFcNodeAddress        OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Node Inet address of the node as defined in the
+    iSNS Specification, RFC 4171.  The format of this object is
+    specified by isnsRegFcNodeAddressType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcNodeEntry 4 }
+
+   isnsRegFcNodeIPA            OBJECT-TYPE
+       SYNTAX                  OCTET STRING (SIZE(8))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "This managed object identifies the FC Initial Process
+    Associator of the node as defined in the iSNS
+    Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcNodeEntry 5 }
+
+   isnsRegFcNodeProxyIscsiName OBJECT-TYPE
+       SYNTAX                  SnmpAdminString (SIZE (0..223))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iSCSI Name used to represent the FC Node in the IP
+    network.  It is used as a pointer to the matching iSCSI Name
+    entry in the iSNS Server.  Its value is usually registered
+    by an FC-iSCSI gateway connecting the IP network to the
+    fabric containing the FC device."
+       REFERENCE  "RFC 4171, Section 6"
+       ::= { isnsRegFcNodeEntry 6 }
+
+   isnsRegFcNodeNumFcPorts     OBJECT-TYPE
+       SYNTAX                  Gauge32 ( 0 .. 4294967295 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The number of FC Ports associated with this FC Node."
+       ::= { isnsRegFcNodeEntry 7 }
+
+   --
+   -- iSNS Registered FC Port Table
+   --
+
+   isnsRegFcPortTable          OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF IsnsRegFcPortEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on registered FC N_Ports in the iSNS.  FC Ports
+    are associated with registered FC Nodes.  This supports
+    iFCP as defined in RFC 4172."
+       REFERENCE "RFC 4172, Section 4"
+       ::= { isnsRegFcNodeInfo 2 }
+
+   isnsRegFcPortEntry          OBJECT-TYPE
+       SYNTAX                   IsnsRegFcPortEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one FC Port that has been registered in
+    iSNS."
+       REFERENCE "RFC 4172, Section 4"
+       INDEX { isnsServerIndex,
+               isnsRegEntityIndex,
+               isnsRegFcPortWwpn }
+       ::= { isnsRegFcPortTable 1 }
+
+   IsnsRegFcPortEntry ::= SEQUENCE {
+       isnsRegFcPortWwpn              FcNameIdOrZero,
+       isnsRegFcPortID                FcAddressIdOrZero,
+       isnsRegFcPortType              Unsigned32,
+       isnsRegFcPortSymbolicName      SnmpAdminString,
+       isnsRegFcPortFabricPortWwn     FcNameIdOrZero,
+       isnsRegFcPortHA                FcAddressIdOrZero,
+       isnsRegFcPortAddressType       InetAddressType,
+       isnsRegFcPortAddress           InetAddress,
+       isnsRegFcPortFcCos             IsnsFcClassOfServiceType,
+       isnsRegFcPortFc4Types          OCTET STRING,
+       isnsRegFcPortFc4Descr          SnmpAdminString,
+       isnsRegFcPortFc4Features       OCTET STRING,
+       isnsRegFcPortScnTypes          IsnsIfcpScnType,
+       isnsRegFcPortRole              IsnsFcPortRoleType,
+       isnsRegFcPortFcNodeWwnn        FcNameIdOrZero,
+       isnsRegFcPortPpnWwn            FcNameIdOrZero
+                                   }
+
+   isnsRegFcPortWwpn           OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero (SIZE(8))
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port's World Wide Port Name as defined in the iSNS
+    Specification, RFC 4171.  A zero-length string is not valid
+    for this managed object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 1 }
+
+   isnsRegFcPortID             OBJECT-TYPE
+       SYNTAX                  FcAddressIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port's Port ID as defined in the iSNS Specification,
+    RFC 4171."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 2 }
+
+   isnsRegFcPortType           OBJECT-TYPE
+       SYNTAX                  Unsigned32 ( 0 .. 65535 )
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port Type as defined in the iSNS Specification,
+    RFC 4171, and the Fibre Channel Generic Services
+    Specification.  Current values are as shown below:
+           unknown      (0),
+           nPort        (1),
+           nlPort       (2),
+           fNlPort      (3),
+           fPort        (129),     -- x'81'
+           flPort       (130),     -- x'82'
+           ePort        (132),     -- x'84'
+           bPort        (133),     -- x'85'
+           mFcpPort     (65297),   -- x'FF11'
+           iFcpPort     (65298),   -- x'FF12'
+           unknownEnd   (65535)
+    The future assignment of any additional values will be
+    documented in a revision of RFC 4171."
+       REFERENCE "RFC 4171, Section 6.6.3"
+       ::= { isnsRegFcPortEntry 3 }
+
+   isnsRegFcPortSymbolicName OBJECT-TYPE
+       SYNTAX                SnmpAdminString
+       MAX-ACCESS            read-only
+       STATUS                current
+       DESCRIPTION
+   "The FC Port Symbolic Name as defined in the iSNS
+    Specification, RFC 4171.  If not provided, then the
+    string SHALL be zero-length."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 4 }
+
+   isnsRegFcPortFabricPortWwn  OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Fabric Port WWN for this entry as defined in the iSNS
+    Specification, RFC 4171.  A zero-length string for this
+    managed object indicates that the Fabric Port WWN is not
+    known, or has not yet been registered with the iSNS Server."
+       REFERENCE "RFC 4171, Section 6"
+      ::= { isnsRegFcPortEntry 5 }
+
+   isnsRegFcPortHA             OBJECT-TYPE
+       SYNTAX                  FcAddressIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port Hard Address as defined in the iSNS
+    Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 6 }
+
+   isnsRegFcPortAddressType    OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsRegFcPortAddress.  If
+    the address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value
+    of this object is unknown(0), and the value of
+    isnsRegFcPortAddress is the zero-length string."
+       ::= { isnsRegFcPortEntry 7 }
+
+   isnsRegFcPortAddress        OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port Inet Address as defined in the iSNS
+    Specification, RFC 4171.  The format of this object is
+    specified by isnsRegFcPortAddressType."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 8 }
+
+   isnsRegFcPortFcCos          OBJECT-TYPE
+       SYNTAX                  IsnsFcClassOfServiceType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port Class of Service as defined in the iSNS
+    Specification, RFC 4171."
+       REFERENCE  "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 9 }
+
+   isnsRegFcPortFc4Types       OBJECT-TYPE
+       SYNTAX                  OCTET STRING (SIZE (32))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port FC-4 Types as defined in the iSNS
+    Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6.6.9"
+       ::= { isnsRegFcPortEntry 10 }
+
+   isnsRegFcPortFc4Descr       OBJECT-TYPE
+       SYNTAX                  SnmpAdminString (SIZE(4..255))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port FC-4 Descriptor as defined in the iSNS
+    Specification, RFC 4171.  The FC-4 Descriptor cannot be
+    longer than 255 bytes.  The iSNS Server internal maximum
+    size is 256 bytes to provide NULL termination."
+        REFERENCE "RFC 4171, Section 6.6.10"
+      ::= { isnsRegFcPortEntry 11 }
+
+   isnsRegFcPortFc4Features    OBJECT-TYPE
+       SYNTAX                  OCTET STRING (SIZE (128))
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port FC-4 Features as defined in the iSNS
+    Specification, RFC 4171."
+       REFERENCE "RFC 4171, Section 6.6.11"
+       ::= { isnsRegFcPortEntry 12 }
+
+   isnsRegFcPortScnTypes       OBJECT-TYPE
+       SYNTAX                  IsnsIfcpScnType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The iFCP State Change Notification (SCN) types enabled for
+    the registered object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 13 }
+
+   isnsRegFcPortRole           OBJECT-TYPE
+       SYNTAX                  IsnsFcPortRoleType
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Port Role defines the role of the registered
+    object."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 14 }
+
+   isnsRegFcPortFcNodeWwnn     OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The FC Node World Wide Node Name that is associated with
+    this FC Port as defined in the iSNS Specification, RFC 4171.
+    This managed object may contain a zero-length string prior
+    to a device registering this value with the iSNS Server."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 15 }
+
+   isnsRegFcPortPpnWwn         OBJECT-TYPE
+       SYNTAX                  FcNameIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Permanent Port Name (PPN) attribute is the FC Port Name WWPN
+    of the first Storage Node registered in the iSNS Database
+    that is associated with a particular FC Device (FC Node).
+    The PPN of all subsequent Storage Node registrations that
+    are associated with that FC Device (FC Node) SHALL be set
+    to the FC Port Name WWPN of the first Storage Node, as
+    defined in the iSNS Specification, RFC 4171.  This managed
+    object may contain a zero-length string prior to a device
+    registering this value with the iSNS Server."
+       REFERENCE "RFC 4171, Section 6"
+       ::= { isnsRegFcPortEntry 16 }
+
+   --
+   --  Mapping from FC Node to Entity - FC Port
+   --
+
+   isnsRegFcNodePortTable      OBJECT-TYPE
+       SYNTAX                  SEQUENCE OF
+                                 IsnsRegFcNodePortEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "A table containing the mapping of a registered FC Node and
+    associated registered iFCP Port to the supporting registered
+    Entity object in an iSNS Server instance."
+       ::= { isnsRegFcNodeInfo 3 }
+
+   isnsRegFcNodePortEntry      OBJECT-TYPE
+       SYNTAX                  IsnsRegFcNodePortEntry
+       MAX-ACCESS              not-accessible
+       STATUS                  current
+       DESCRIPTION
+   "Information on one mapping from an FC Node and iFCP Port to
+    an Entity object registered in an iSNS."
+       INDEX { isnsServerIndex,
+               isnsRegFcNodeWwnn,
+               isnsRegFcPortWwpn }
+       ::= { isnsRegFcNodePortTable 1 }
+
+   IsnsRegFcNodePortEntry ::= SEQUENCE {
+           isnsRegFcNodePortEntityIndex IsnsEntityIndexIdOrZero
+                                       }
+
+   isnsRegFcNodePortEntityIndex OBJECT-TYPE
+       SYNTAX                  IsnsEntityIndexIdOrZero
+       MAX-ACCESS              read-only
+       STATUS                  current
+       DESCRIPTION
+   "The Entity Index for the registered Entity object
+    associated with the FC Port and FC Node.  This managed
+    object may contain the value of zero prior to a device
+    registering this value with the iSNS Server."
+       ::= { isnsRegFcNodePortEntry 1 }
+
+   --
+   -- iSNS Notifications Information -----------------
+   --
+
+   isnsNotificationsInfo        OBJECT IDENTIFIER
+                                     ::= { isnsObjects 2 }
+
+   isnsInstanceInfo            OBJECT-TYPE
+       SYNTAX                  SnmpAdminString
+       MAX-ACCESS              accessible-for-notify
+       STATUS                  current
+       DESCRIPTION
+   "Textual information about the notification event and the
+    iSNS Server generating the notification.  An example is:
+    iSNS Server Started."
+       ::= { isnsNotificationsInfo 1 }
+
+   isnsAddressNotificationType OBJECT-TYPE
+       SYNTAX                  InetAddressType
+       MAX-ACCESS              accessible-for-notify
+       STATUS                  current
+       DESCRIPTION
+   "The type of Inet address in isnsAddressNotification.  If
+    the address is specified, then it must be a valid unicast
+    address and the value of this object must be ipv4(1),
+    ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value
+    of this object is unknown(0), and the value of
+    isnsAddressNotification is the zero-length string."
+       ::= { isnsNotificationsInfo 2 }
+
+   isnsAddressNotification     OBJECT-TYPE
+       SYNTAX                  InetAddress
+       MAX-ACCESS              accessible-for-notify
+       STATUS                  current
+       DESCRIPTION
+   "Identifies the IP address of the iSNS Server.  The format of
+
+    this object is specified by isnsAddressNotificationType.
+    The IP address will always be specified in the notification
+    unless an error causes the IP address to not be known."
+       ::= { isnsNotificationsInfo 3 }
+
+   isnsTcpPortNotification     OBJECT-TYPE
+       SYNTAX                  InetPortNumber
+       MAX-ACCESS              accessible-for-notify
+       STATUS                  current
+       DESCRIPTION
+   "Indicates the TCP port the iSNS Server is using,
+    or 0 if TCP-based registrations are not supported."
+       ::= { isnsNotificationsInfo 4 }
+
+   isnsUdpPortNotification     OBJECT-TYPE
+       SYNTAX                  InetPortNumber
+       MAX-ACCESS              accessible-for-notify
+       STATUS                  current
+       DESCRIPTION
+   "Indicates the UDP port the iSNS Server is using,
+    or 0 if UDP-based registrations are not supported."
+       ::= { isnsNotificationsInfo 5 }
+
+   --
+   -- iSNS Notification Block -----------------
+   --
+
+   isnsServerStart             NOTIFICATION-TYPE
+       OBJECTS {
+           isnsInstanceInfo,
+           isnsAddressNotificationType,
+           isnsAddressNotification,
+           isnsTcpPortNotification,
+           isnsUdpPortNotification
+               }
+       STATUS                  current
+       DESCRIPTION
+   "This notification is sent when an iSNS Server begins
+    operation.  The notification provides the following:
+           isnsInstanceInfo : iSNS Server textual information
+           isnsAddressTypeNotification : iSNS Server address type
+           isnsAddressNotification : iSNS Server address
+           isnsTcpPortNotification : iSNS Server TCP Port
+           isnsUdpPortNotification : iSNS Server UDP Port
+   "
+       ::= { isnsNotifications 1 }
+
+   isnsServerShutdown          NOTIFICATION-TYPE
+
+       OBJECTS {
+           isnsInstanceInfo,
+           isnsAddressNotificationType,
+           isnsAddressNotification,
+           isnsTcpPortNotification,
+           isnsUdpPortNotification
+               }
+       STATUS                  current
+       DESCRIPTION
+   "This notification is sent when an iSNS Server is
+    shutdown.  The notification provides the following:
+           isnsInstanceInfo : iSNS Server textual information
+           isnsAddressTypeNotification : iSNS Server address type
+           isnsAddressNotification : iSNS Server address
+           isnsTcpPortNotification : iSNS Server TCP Port
+           isnsUdpPortNotification : iSNS Server UDP Port
+   "
+       ::= { isnsNotifications 2 }
+
+   ------------------------------------------------------------
+   --
+   -- Compliance Information
+   --
+
+   isnsCompliances OBJECT IDENTIFIER ::= { isnsConformance 1 }
+
+   isnsIscsiServerCompliance MODULE-COMPLIANCE
+       STATUS                  current
+       DESCRIPTION
+   "Initial compliance statement for an iSNS Server
+    providing support to iSCSI clients."
+       MODULE       -- this module
+       MANDATORY-GROUPS {
+           isnsServerAttributesGroup,
+           isnsServerIscsiControlNodeGroup,
+           isnsServerIscsiDdsDdObjGroup,
+           isnsServerRegIscsiObjGroup,
+           isnsServerNumObjectsGroup,
+           isnsNotificationsObjGroup,
+           isnsServerNotificationGroup
+                        }
+       OBJECT isnsServerDiscoveryMcGroupType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z
+    is required."
+
+       OBJECT isnsServerDiscoveryMcGroupAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z
+    and their related SIZE need to be supported."
+
+       OBJECT isnsDdPortalMemberAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z
+    is required."
+
+       OBJECT isnsDdPortalMemberAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegEntityManagementAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z
+    is required."
+
+       OBJECT isnsRegEntityManagementAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegPortalAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z
+    is required."
+
+       OBJECT isnsRegPortalAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegPgPortalAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z
+    is required."
+
+       OBJECT isnsRegPgPortalAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z
+    and their related SIZE need to be supported."
+
+       OBJECT isnsAddressNotificationType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z
+    is required."
+
+       OBJECT isnsAddressNotification
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z
+    and their related SIZE need to be supported."
+       ::= { isnsCompliances 1 }
+
+   isnsIfcpServerCompliance MODULE-COMPLIANCE
+       STATUS                  current
+       DESCRIPTION
+   "Initial compliance statement for an iSNS Server
+    providing support to iFCP Clients."
+       MODULE       -- this module
+       MANDATORY-GROUPS {
+           isnsServerAttributesGroup,
+           isnsServerIfcpPortControlNodeGroup,
+           isnsServerIfcpDdsDdObjGroup,
+           isnsServerRegIfcpObjGroup,
+           isnsServerNumObjectsGroup,
+           isnsNotificationsObjGroup,
+           isnsServerNotificationGroup
+                        }
+       OBJECT isnsServerDiscoveryMcGroupType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+    is required."
+
+       OBJECT isnsServerDiscoveryMcGroupAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+
+       OBJECT isnsDdPortalMemberAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+    is required."
+
+       OBJECT isnsDdPortalMemberAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegEntityManagementAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+    is required."
+
+       OBJECT isnsRegEntityManagementAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegPortalAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+    is required."
+
+       OBJECT isnsRegPortalAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegFcNodeAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+
+    is required."
+
+       OBJECT isnsRegFcNodeAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+
+       OBJECT isnsRegFcPortAddressType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+    is required."
+
+       OBJECT isnsRegFcPortAddress
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+
+       OBJECT isnsAddressNotificationType
+       SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2),
+                                  ipv4z(3), ipv6z(4) }
+       DESCRIPTION
+   "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
+    is required."
+
+       OBJECT isnsAddressNotification
+       SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 ))
+       DESCRIPTION
+   "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z,
+    and their related SIZE need to be supported."
+       ::= { isnsCompliances 2 }
+
+isnsGroups OBJECT IDENTIFIER ::= { isnsConformance 2 }
+
+   isnsServerAttributesGroup      OBJECT-GROUP
+       OBJECTS {
+          isnsServerName,
+          isnsServerIsnsVersion,
+          isnsServerVendorInfo,
+          isnsServerPhysicalIndex,
+          isnsServerTcpPort,
+          isnsServerUdpPort,
+          isnsServerDiscontinuityTime,
+          isnsServerRole,
+          isnsServerDiscoveryMethodsEnabled,
+          isnsServerDiscoveryMcGroupType,
+          isnsServerDiscoveryMcGroupAddress,
+          isnsServerEsiNonResponseThreshold,
+          isnsServerEnableControlNodeMgtScn,
+          isnsServerDefaultDdDdsStatus,
+          isnsServerUpdateDdDdsSupported,
+          isnsServerUpdateDdDdsEnabled
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server attributes."
+          ::= { isnsGroups 1 }
+
+   isnsServerNumObjectsGroup      OBJECT-GROUP
+       OBJECTS {
+          isnsNumDds,
+          isnsNumDd,
+          isnsNumEntities,
+          isnsNumPortals,
+          isnsNumPortalGroups,
+          isnsNumIscsiNodes,
+          isnsNumFcPorts,
+          isnsNumFcNodes,
+          isnsRegEntityInfoNumPortals,
+          isnsRegEntityInfoNumPortalGroups,
+          isnsRegEntityInfoNumIscsiNodes,
+          isnsRegEntityInfoNumFcPorts,
+          isnsRegEntityInfoNumFcNodes
+               }
+       STATUS                  current
+       DESCRIPTION
+   "Managed objects indicating the number of registered objects
+    in an iSNS Server or the number of registered objects
+    associated with a registered Entity.  These managed objects
+    are optional to implement."
+          ::= { isnsGroups 2 }
+
+   isnsServerIscsiControlNodeGroup    OBJECT-GROUP
+       OBJECTS {
+          isnsControlNodeIscsiNodeName,
+          isnsControlNodeIscsiIsRegistered,
+          isnsControlNodeIscsiRcvMgtSCN
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server iSCSI control node managed objects."
+          ::= { isnsGroups 3 }
+
+   isnsServerIfcpPortControlNodeGroup   OBJECT-GROUP
+       OBJECTS {
+          isnsControlNodeFcPortIsRegistered,
+          isnsControlNodeFcPortRcvMgtSCN
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server iFCP Port control node managed objects."
+          ::= { isnsGroups 4 }
+
+   isnsServerIscsiDdsDdObjGroup   OBJECT-GROUP
+       OBJECTS {
+          isnsDdsSymbolicName,
+          isnsDdsStatus,
+          isnsDdsMemberSymbolicName,
+          isnsDdSymbolicName,
+          isnsDdFeatures,
+          isnsDdIscsiMemberName,
+          isnsDdIscsiMemberIsRegistered,
+          isnsDdPortalMemberAddressType,
+          isnsDdPortalMemberAddress,
+          isnsDdPortalMemberPortType,
+          isnsDdPortalMemberPort,
+          isnsDdPortalMemberIsRegistered
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server DDS and DD managed objects for iSCSI."
+          ::= { isnsGroups 5 }
+
+   isnsServerIfcpDdsDdObjGroup    OBJECT-GROUP
+       OBJECTS {
+          isnsDdsSymbolicName,
+          isnsDdsStatus,
+          isnsDdSymbolicName,
+          isnsDdFeatures,
+          isnsDdPortalMemberAddressType,
+          isnsDdPortalMemberAddress,
+          isnsDdPortalMemberPortType,
+          isnsDdPortalMemberPort,
+          isnsDdPortalMemberIsRegistered,
+          isnsDdFcPortMemberIsRegistered
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server DDS and DD managed objects for iFCP."
+          ::= { isnsGroups 6 }
+
+   isnsServerRegIscsiObjGroup   OBJECT-GROUP
+       OBJECTS {
+          isnsRegEntityEID,
+          isnsRegEntityProtocol,
+          isnsRegEntityManagementAddressType,
+          isnsRegEntityManagementAddress,
+          isnsRegEntityTimestamp,
+          isnsRegEntityVersionMin,
+          isnsRegEntityVersionMax,
+          isnsRegEntityRegistrationPeriod,
+          isnsRegEntityInfoNumPortals,
+          isnsRegEntityInfoNumPortalGroups,
+          isnsRegEntityInfoNumIscsiNodes,
+          isnsRegEntityInfoNumFcPorts,
+          isnsRegEntityInfoNumFcNodes,
+          isnsRegPortalAddressType,
+          isnsRegPortalAddress,
+          isnsRegPortalPortType,
+          isnsRegPortalPort,
+          isnsRegPortalSymbolicName,
+          isnsRegPortalEsiInterval,
+          isnsRegPortalEsiPortType,
+          isnsRegPortalEsiPort,
+          isnsRegPortalScnPortType,
+          isnsRegPortalScnPort,
+          isnsRegPortalSecurityInfo,
+          isnsRegPgIscsiNodeIndex,
+          isnsRegPgIscsiName,
+          isnsRegPgPortalPortalIndex,
+          isnsRegPgPortalAddressType,
+          isnsRegPgPortalAddress,
+          isnsRegPgPortalPortType,
+          isnsRegPgPortalPort,
+          isnsRegPgPGT,
+          isnsRegIscsiNodeName,
+          isnsRegIscsiNodeType,
+          isnsRegIscsiNodeAlias,
+          isnsRegIscsiNodeScnTypes,
+          isnsRegIscsiNodeWwnToken,
+          isnsRegIscsiNodeAuthMethod
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server registered iSCSI managed objects."
+          ::= { isnsGroups 7 }
+
+   isnsServerRegIfcpObjGroup    OBJECT-GROUP
+       OBJECTS {
+
+          isnsRegEntityEID,
+          isnsRegEntityProtocol,
+          isnsRegEntityManagementAddressType,
+          isnsRegEntityManagementAddress,
+          isnsRegEntityTimestamp,
+          isnsRegEntityVersionMin,
+          isnsRegEntityVersionMax,
+          isnsRegEntityRegistrationPeriod,
+          isnsRegEntityInfoNumPortals,
+          isnsRegEntityInfoNumPortalGroups,
+          isnsRegEntityInfoNumIscsiNodes,
+          isnsRegEntityInfoNumFcPorts,
+          isnsRegEntityInfoNumFcNodes,
+          isnsRegPortalAddressType,
+          isnsRegPortalAddress,
+          isnsRegPortalPortType,
+          isnsRegPortalPort,
+          isnsRegPortalSymbolicName,
+          isnsRegPortalEsiInterval,
+          isnsRegPortalEsiPortType,
+          isnsRegPortalEsiPort,
+          isnsRegPortalScnPortType,
+          isnsRegPortalScnPort,
+          isnsRegPortalSecurityInfo,
+          isnsRegFcPortID,
+          isnsRegFcPortType,
+          isnsRegFcPortSymbolicName,
+          isnsRegFcPortFabricPortWwn,
+          isnsRegFcPortHA,
+          isnsRegFcPortAddressType,
+          isnsRegFcPortAddress,
+          isnsRegFcPortFcCos,
+          isnsRegFcPortFc4Types,
+          isnsRegFcPortFc4Descr,
+          isnsRegFcPortFc4Features,
+          isnsRegFcPortScnTypes,
+          isnsRegFcPortRole,
+          isnsRegFcPortFcNodeWwnn,
+          isnsRegFcPortPpnWwn,
+          isnsRegFcNodeSymbolicName,
+          isnsRegFcNodeAddressType,
+          isnsRegFcNodeAddress,
+          isnsRegFcNodeIPA,
+          isnsRegFcNodeProxyIscsiName,
+          isnsRegFcNodeNumFcPorts,
+          isnsRegFcNodePortEntityIndex
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server registered iFCP managed objects."
+          ::= { isnsGroups 8 }
+
+   isnsNotificationsObjGroup    OBJECT-GROUP
+       OBJECTS {
+          isnsInstanceInfo,
+          isnsAddressNotificationType,
+          isnsAddressNotification,
+          isnsTcpPortNotification,
+          isnsUdpPortNotification
+               }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Notification managed objects."
+          ::= { isnsGroups 9 }
+
+   isnsServerNotificationGroup  NOTIFICATION-GROUP
+       NOTIFICATIONS {
+          isnsServerStart,
+          isnsServerShutdown
+                     }
+       STATUS                  current
+       DESCRIPTION
+   "iSNS Server Notification managed objects."
+          ::= { isnsGroups 10 }
+END
diff --git a/snmp_builder/mibs/ITU-ALARM-MIB.mib b/snmp_builder/mibs/ITU-ALARM-MIB.mib
new file mode 100644
index 0000000..be25142
--- /dev/null
+++ b/snmp_builder/mibs/ITU-ALARM-MIB.mib
@@ -0,0 +1,486 @@
+ITU-ALARM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE,
+   Gauge32, mib-2
+       FROM SNMPv2-SMI                -- [RFC2578]
+   AutonomousType, RowPointer
+       FROM SNMPv2-TC                 -- [RFC2579]
+   SnmpAdminString
+       FROM SNMP-FRAMEWORK-MIB        -- [RFC3411]
+   alarmListName, alarmModelIndex,
+   alarmActiveDateAndTime, alarmActiveIndex
+       FROM ALARM-MIB                 -- [RFC3877]
+   ItuPerceivedSeverity,
+   ItuTrendIndication
+       FROM ITU-ALARM-TC-MIB          -- [RFC3877]
+   IANAItuProbableCause,
+   IANAItuEventType
+       FROM IANA-ITU-ALARM-TC-MIB     -- [RFC3877]
+   MODULE-COMPLIANCE, OBJECT-GROUP
+       FROM SNMPv2-CONF               -- [RFC2580]
+   ZeroBasedCounter32
+       FROM RMON2-MIB;                -- [RFC2021]
+
+  ituAlarmMIB MODULE-IDENTITY
+      LAST-UPDATED "200409090000Z"  -- September 09, 2004
+      ORGANIZATION "IETF Distributed Management Working Group"
+      CONTACT-INFO
+           "WG EMail: disman@ietf.org
+           Subscribe: disman-request@ietf.org
+           http://www.ietf.org/html.charters/disman-charter.html
+
+           Chair:     Randy Presuhn
+                      randy_presuhn@mindspring.com
+
+           Editors:   Sharon Chisholm
+                      Nortel Networks
+                      PO Box 3511 Station C
+                      Ottawa, Ont.  K1Y 4H7
+                      Canada
+                      schishol@nortelnetworks.com
+
+                      Dan Romascanu
+                      Avaya
+                      Atidim Technology Park, Bldg. #3
+                      Tel Aviv, 61131
+
+                      Israel
+                      Tel: +972-3-645-8414
+                      Email: dromasca@avaya.com"
+      DESCRIPTION
+              "The MIB module describes ITU Alarm information
+              as defined in ITU Recommendation M.3100 [M.3100],
+              X.733 [X.733] and X.736 [X.736].
+
+              Copyright (C) The Internet Society (2004).  The
+              initial version of this MIB module was published
+              in RFC 3877.  For full legal notices see the RFC
+              itself.  Supplementary information may be available on:
+              http://www.ietf.org/copyrights/ianamib.html"
+      REVISION    "200409090000Z"  -- September 09, 2004
+      DESCRIPTION
+          "Initial version, published as RFC 3877."
+      ::= { mib-2 121 }
+
+ituAlarmObjects OBJECT IDENTIFIER ::= { ituAlarmMIB 1 }
+
+ituAlarmModel OBJECT IDENTIFIER ::= { ituAlarmObjects 1 }
+
+ituAlarmActive  OBJECT IDENTIFIER ::= { ituAlarmObjects 2 }
+
+ituAlarmTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF ItuAlarmEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "A table of ITU Alarm information for possible alarms
+       on the system."
+   ::= { ituAlarmModel 1 }
+
+ituAlarmEntry OBJECT-TYPE
+   SYNTAX      ItuAlarmEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "Entries appear in this table whenever an entry is created
+        in the alarmModelTable with a value of alarmModelState in
+        the range from 1 to 6.  Entries disappear from this table
+        whenever the corresponding entries are deleted from the
+        alarmModelTable, including in cases where those entries
+        have been deleted due to local system action.  The value of
+        alarmModelSpecificPointer has no effect on the creation
+        or deletion of entries in this table.  Values of
+        alarmModelState map to values of ituAlarmPerceivedSeverity
+        as follows:
+
+          alarmModelState -> ituAlarmPerceivedSeverity
+                 1        ->         clear (1)
+                 2        ->         indeterminate (2)
+                 3        ->         warning (6)
+                 4        ->         minor (5)
+                 5        ->         major (4)
+                 6        ->         critical (3)
+
+        All other values of alarmModelState MUST NOT appear
+        in this table.
+
+        This table MUST be persistent across system reboots."
+   INDEX       { alarmListName, alarmModelIndex,
+                ituAlarmPerceivedSeverity }
+   ::= { ituAlarmTable 1 }
+
+ItuAlarmEntry ::= SEQUENCE {
+   ituAlarmPerceivedSeverity     ItuPerceivedSeverity,
+   ituAlarmEventType             IANAItuEventType,
+   ituAlarmProbableCause         IANAItuProbableCause,
+   ituAlarmAdditionalText        SnmpAdminString,
+   ituAlarmGenericModel          RowPointer }
+
+ituAlarmPerceivedSeverity OBJECT-TYPE
+   SYNTAX  ItuPerceivedSeverity
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+            "ITU perceived severity values."
+    REFERENCE
+        "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+         ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+            Reporting Function', 1992"
+    ::= { ituAlarmEntry 1 }
+
+ituAlarmEventType OBJECT-TYPE
+   SYNTAX       IANAItuEventType
+   MAX-ACCESS   read-write
+   STATUS       current
+   DESCRIPTION
+            "Represents the event type values for the alarms"
+    REFERENCE
+        "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+         ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+
+            Reporting Function', 1992
+         ITU Recommendation X.736, 'Information Technology - Open
+            Systems Interconnection - System Management: Security
+            Alarm Reporting Function', 1992"
+    ::= { ituAlarmEntry 2 }
+
+ituAlarmProbableCause OBJECT-TYPE
+   SYNTAX      IANAItuProbableCause
+   MAX-ACCESS  read-write
+   STATUS       current
+   DESCRIPTION
+            "ITU probable cause values."
+    REFERENCE
+        "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+         ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+            Reporting Function', 1992
+         ITU Recommendation X.736, 'Information Technology - Open
+            Systems Interconnection - System Management: Security
+            Alarm Reporting Function', 1992"
+    ::= { ituAlarmEntry 3 }
+
+ituAlarmAdditionalText OBJECT-TYPE
+   SYNTAX  SnmpAdminString
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+            "Represents the additional text field for the alarm."
+    REFERENCE
+        "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+         ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+            Reporting Function', 1992"
+    ::= { ituAlarmEntry 4}
+
+ituAlarmGenericModel OBJECT-TYPE
+   SYNTAX     RowPointer
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+   "This object points to the corresponding
+    row in the alarmModelTable for this alarm severity.
+
+    This corresponding entry to alarmModelTable could also
+    be derived by performing the reverse of the mapping
+    from alarmModelState to ituAlarmPerceivedSeverity defined
+
+    in the description of ituAlarmEntry to determine the
+    appropriate { alarmListName, alarmModelIndex, alarmModelState }
+    for this { alarmListName, alarmModelIndex,
+    ituAlarmPerceivedSeverity }."
+   ::= { ituAlarmEntry 5 }
+
+-- ITU Active Alarm Table --
+
+ituAlarmActiveTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF ItuAlarmActiveEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "A table of ITU information for active alarms entries."
+   ::= { ituAlarmActive 1 }
+
+ituAlarmActiveEntry OBJECT-TYPE
+   SYNTAX      ItuAlarmActiveEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "Entries appear in this table when alarms are active.  They
+       are removed when the alarm is no longer occurring."
+   INDEX       { alarmListName, alarmActiveDateAndTime,
+                alarmActiveIndex }
+   ::= { ituAlarmActiveTable 1 }
+
+ItuAlarmActiveEntry ::= SEQUENCE {
+    ituAlarmActiveTrendIndication       ItuTrendIndication,
+    ituAlarmActiveDetector              AutonomousType,
+    ituAlarmActiveServiceProvider       AutonomousType,
+    ituAlarmActiveServiceUser           AutonomousType
+    }
+
+ituAlarmActiveTrendIndication OBJECT-TYPE
+   SYNTAX      ItuTrendIndication
+   MAX-ACCESS  read-only
+   STATUS       current
+   DESCRIPTION
+            "Represents the trend indication values for the alarms."
+    REFERENCE
+        "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+         ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+            Reporting Function', 1992"
+    ::= { ituAlarmActiveEntry 1 }
+
+ituAlarmActiveDetector OBJECT-TYPE
+   SYNTAX AutonomousType
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+      "Represents the SecurityAlarmDetector object."
+    REFERENCE
+        "ITU Recommendation X.736, 'Information Technology - Open
+            Systems Interconnection - System Management: Security
+            Alarm Reporting Function', 1992"
+   ::= { ituAlarmActiveEntry 2 }
+
+ituAlarmActiveServiceProvider OBJECT-TYPE
+   SYNTAX AutonomousType
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+      "Represents the ServiceProvider object."
+    REFERENCE
+        "ITU Recommendation X.736, 'Information Technology - Open
+            Systems Interconnection - System Management: Security
+            Alarm Reporting Function', 1992"
+   ::= { ituAlarmActiveEntry 3 }
+
+ituAlarmActiveServiceUser OBJECT-TYPE
+   SYNTAX AutonomousType
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+      "Represents the ServiceUser object."
+    REFERENCE
+        "ITU Recommendation X.736, 'Information Technology - Open
+            Systems Interconnection - System Management: Security
+            Alarm Reporting Function', 1992"
+   ::= { ituAlarmActiveEntry 4 }
+
+-- Statistics and Counters
+
+ituAlarmActiveStatsTable  OBJECT-TYPE
+      SYNTAX  SEQUENCE OF ItuAlarmActiveStatsEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "This table represents the ITU alarm statistics
+         information."
+  ::= { ituAlarmActive 2 }
+
+ituAlarmActiveStatsEntry OBJECT-TYPE
+      SYNTAX  ItuAlarmActiveStatsEntry
+      MAX-ACCESS  not-accessible
+      STATUS  current
+      DESCRIPTION
+         "Statistics on the current active ITU alarms."
+      INDEX   { alarmListName }
+  ::= {  ituAlarmActiveStatsTable 1 }
+
+ItuAlarmActiveStatsEntry ::=
+ SEQUENCE {
+   ituAlarmActiveStatsIndeterminateCurrent Gauge32,
+   ituAlarmActiveStatsCriticalCurrent      Gauge32,
+   ituAlarmActiveStatsMajorCurrent         Gauge32,
+   ituAlarmActiveStatsMinorCurrent         Gauge32,
+   ituAlarmActiveStatsWarningCurrent       Gauge32,
+   ituAlarmActiveStatsIndeterminates       ZeroBasedCounter32,
+   ituAlarmActiveStatsCriticals            ZeroBasedCounter32,
+   ituAlarmActiveStatsMajors               ZeroBasedCounter32,
+   ituAlarmActiveStatsMinors               ZeroBasedCounter32,
+   ituAlarmActiveStatsWarnings             ZeroBasedCounter32
+ }
+
+ituAlarmActiveStatsIndeterminateCurrent OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the current number of active alarms with a
+        ituAlarmPerceivedSeverity of indeterminate."
+   ::= { ituAlarmActiveStatsEntry 1 }
+
+ituAlarmActiveStatsCriticalCurrent OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the current number of active alarms with a
+        ituAlarmPerceivedSeverity of critical."
+   ::= { ituAlarmActiveStatsEntry 2 }
+
+ituAlarmActiveStatsMajorCurrent OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the current number of active alarms with a
+
+        ituAlarmPerceivedSeverity of major."
+   ::= { ituAlarmActiveStatsEntry 3 }
+
+ituAlarmActiveStatsMinorCurrent OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the current number of active alarms with a
+        ituAlarmPerceivedSeverity of minor."
+   ::= { ituAlarmActiveStatsEntry 4 }
+
+ituAlarmActiveStatsWarningCurrent OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the current number of active alarms with a
+        ituAlarmPerceivedSeverity of warning."
+   ::= { ituAlarmActiveStatsEntry 5 }
+
+ituAlarmActiveStatsIndeterminates OBJECT-TYPE
+   SYNTAX      ZeroBasedCounter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the total number of active alarms with a
+        ituAlarmPerceivedSeverity of indeterminate since system
+        restart."
+   ::= { ituAlarmActiveStatsEntry 6 }
+
+ituAlarmActiveStatsCriticals OBJECT-TYPE
+   SYNTAX      ZeroBasedCounter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the total number of active alarms with a
+        ituAlarmPerceivedSeverity of critical since system restart."
+   ::= { ituAlarmActiveStatsEntry 7 }
+
+ituAlarmActiveStatsMajors OBJECT-TYPE
+   SYNTAX      ZeroBasedCounter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the total number of active alarms with a
+        ituAlarmPerceivedSeverity of major since system restart."
+   ::= { ituAlarmActiveStatsEntry 8 }
+
+ituAlarmActiveStatsMinors OBJECT-TYPE
+   SYNTAX      ZeroBasedCounter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the total number of active alarms with a
+        ituAlarmPerceivedSeverity of minor since system restart."
+   ::= { ituAlarmActiveStatsEntry 9 }
+
+ituAlarmActiveStatsWarnings OBJECT-TYPE
+   SYNTAX      ZeroBasedCounter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "A count of the total number of active alarms with a
+        ituAlarmPerceivedSeverity of warning since system restart."
+   ::= { ituAlarmActiveStatsEntry 10 }
+
+-- Conformance
+
+ituAlarmConformance OBJECT IDENTIFIER ::= { ituAlarmMIB 2 }
+ituAlarmCompliances  OBJECT IDENTIFIER ::= { ituAlarmConformance 1 }
+
+ituAlarmCompliance MODULE-COMPLIANCE
+   STATUS  current
+   DESCRIPTION
+          "The compliance statement for systems supporting
+          the ITU Alarm MIB."
+   MODULE -- this module
+       MANDATORY-GROUPS {
+           ituAlarmGroup
+           }
+   GROUP       ituAlarmServiceUserGroup
+       DESCRIPTION
+           "This group is optional."
+   GROUP       ituAlarmSecurityGroup
+       DESCRIPTION
+           "This group is optional."
+   GROUP       ituAlarmStatisticsGroup
+       DESCRIPTION
+           "This group is optional."
+  ::= { ituAlarmCompliances 1 }
+
+ituAlarmGroups OBJECT IDENTIFIER ::= { ituAlarmConformance 2 }
+
+ituAlarmGroup OBJECT-GROUP
+ OBJECTS {
+           ituAlarmEventType,
+           ituAlarmProbableCause,
+           ituAlarmGenericModel
+         }
+ STATUS   current
+ DESCRIPTION
+               "ITU alarm details list group."
+ ::= { ituAlarmGroups 1}
+
+ituAlarmServiceUserGroup OBJECT-GROUP
+ OBJECTS {
+           ituAlarmAdditionalText,
+           ituAlarmActiveTrendIndication
+         }
+ STATUS current
+ DESCRIPTION
+         "The use of these parameters is a service-user option."
+ ::= { ituAlarmGroups 2 }
+
+ituAlarmSecurityGroup OBJECT-GROUP
+  OBJECTS {
+          ituAlarmActiveDetector,
+          ituAlarmActiveServiceProvider,
+          ituAlarmActiveServiceUser
+         }
+  STATUS current
+  DESCRIPTION
+         "Security Alarm Reporting Function"
+    REFERENCE
+        "ITU Recommendation X.736, 'Information Technology - Open
+            Systems Interconnection - System Management: Security
+            Alarm Reporting Function', 1992"
+  ::= { ituAlarmGroups 3 }
+
+ituAlarmStatisticsGroup OBJECT-GROUP
+  OBJECTS {
+         ituAlarmActiveStatsIndeterminateCurrent,
+         ituAlarmActiveStatsCriticalCurrent,
+         ituAlarmActiveStatsMajorCurrent,
+         ituAlarmActiveStatsMinorCurrent,
+         ituAlarmActiveStatsWarningCurrent,
+         ituAlarmActiveStatsIndeterminates,
+         ituAlarmActiveStatsCriticals,
+         ituAlarmActiveStatsMajors,
+         ituAlarmActiveStatsMinors,
+         ituAlarmActiveStatsWarnings
+          }
+  STATUS current
+  DESCRIPTION
+    "ITU Active Alarm Statistics."
+  ::= { ituAlarmGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/ITU-ALARM-TC-MIB.mib b/snmp_builder/mibs/ITU-ALARM-TC-MIB.mib
new file mode 100644
index 0000000..d838981
--- /dev/null
+++ b/snmp_builder/mibs/ITU-ALARM-TC-MIB.mib
@@ -0,0 +1,86 @@
+ITU-ALARM-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, mib-2
+       FROM SNMPv2-SMI         -- [RFC2578]
+   TEXTUAL-CONVENTION
+       FROM SNMPv2-TC;         -- [RFC2579]
+
+  ituAlarmTc MODULE-IDENTITY
+      LAST-UPDATED "200409090000Z"  -- September 09, 2004
+      ORGANIZATION "IETF Distributed Management Working Group"
+      CONTACT-INFO
+         " WG EMail: disman@ietf.org
+           Subscribe: disman-request@ietf.org
+           http://www.ietf.org/html.charters/disman-charter.html
+
+           Chair:     Randy Presuhn
+                      randy_presuhn@mindspring.com
+
+           Editors:   Sharon Chisholm
+                      Nortel Networks
+                      PO Box 3511 Station C
+                      Ottawa, Ont.  K1Y 4H7
+                      Canada
+                      schishol@nortelnetworks.com
+
+                      Dan Romascanu
+                      Avaya
+                      Atidim Technology Park, Bldg. #3
+                      Tel Aviv, 61131
+                      Israel
+                      Tel: +972-3-645-8414
+                      Email: dromasca@avaya.com"
+      DESCRIPTION
+         "This MIB module defines the ITU Alarm
+         textual convention for objects not expected to require
+         regular extension.
+
+         Copyright (C) The Internet Society (2004).  The
+         initial version of this MIB module was published
+         in RFC 3877.  For full legal notices see the RFC
+         itself.  Supplementary information may be available on:
+         http://www.ietf.org/copyrights/ianamib.html"
+      REVISION    "200409090000Z"  -- September 09, 2004
+      DESCRIPTION
+          "Initial version, published as RFC 3877."
+     ::= { mib-2 120 }
+
+ItuPerceivedSeverity ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "ITU perceived severity values"
+    REFERENCE
+           "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+            ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+            Reporting Function', 1992"
+    SYNTAX         INTEGER
+           {
+           cleared (1),
+           indeterminate (2),
+           critical (3),
+           major (4),
+           minor (5),
+           warning (6)
+           }
+
+ItuTrendIndication ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+            "ITU trend indication values for alarms."
+    REFERENCE
+           "ITU Recommendation M.3100, 'Generic Network Information
+            Model', 1995
+            ITU Recommendation X.733, 'Information Technology - Open
+            Systems Interconnection - System Management: Alarm
+            Reporting Function', 1992"
+    SYNTAX         INTEGER
+      {
+      moreSevere (1),
+      noChange (2),
+      lessSevere (3)
+      }
+
+END
diff --git a/snmp_builder/mibs/Job-Monitoring-MIB.mib b/snmp_builder/mibs/Job-Monitoring-MIB.mib
new file mode 100644
index 0000000..1870e25
--- /dev/null
+++ b/snmp_builder/mibs/Job-Monitoring-MIB.mib
@@ -0,0 +1,1652 @@
+Job-Monitoring-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, enterprises,
+    Integer32                                       FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                              FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP                 FROM SNMPv2-CONF;
+    -- The following textual-conventions are needed to implement
+    -- certain attributes, but are not needed to compile this MIB.
+    -- They are provided here for convenience:
+    -- hrDeviceIndex                        FROM HOST-RESOURCES-MIB
+    -- DateAndTime                          FROM SNMPv2-TC
+    -- PrtInterpreterLangFamilyTC,
+    -- CodedCharSet                         FROM Printer-MIB
+
+-- Use the enterprises arc assigned to the PWG which is pwg(2699).
+-- Group all PWG mibs under mibs(1).
+
+jobmonMIB MODULE-IDENTITY
+    LAST-UPDATED "9902190000Z"
+    ORGANIZATION "Printer Working Group (PWG)"
+    CONTACT-INFO
+        "Tom Hastings
+        Postal:  Xerox Corp.
+                 Mail stop ESAE-231
+                 701 S. Aviation Blvd.
+                 El Segundo, CA 90245
+
+        Tel:     (301)333-6413
+        Fax:     (301)333-5514
+        E-mail:  hastings@cp10.es.xerox.com
+
+        Send questions and comments to the Printer Working Group (PWG)
+        using the Job Monitoring Project (JMP) Mailing List:
+        jmp@pwg.org
+
+        For further information, including how to subscribe to the
+        jmp mailing list, access the PWG web page under 'JMP':
+
+            http://www.pwg.org/
+
+        Implementers of this specification are encouraged to join the
+        jmp mailing list in order to participate in discussions on any
+        clarifications needed and registration proposals being reviewed
+
+        in order to achieve consensus."
+    DESCRIPTION
+        "The MIB module for monitoring job in servers, printers, and
+        other devices.
+
+        Version: 1.0"
+
+    -- revision history
+    REVISION    "9902190000Z"
+    DESCRIPTION " This version published as RFC 2707"
+    ::= { enterprises pwg(2699)  mibs(1)  jobmonMIB(1) }
+
+-- Textual conventions for this MIB module
+
+JmUTF8StringTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION
+        "To facilitate internationalization, this TC represents
+        information taken from the ISO/IEC IS 10646-1 character set,
+        encoded as an octet string using the UTF-8 character encoding
+        scheme.
+
+        See section 3.6.1, entitled: 'Text generated by the server or
+        device'."
+    SYNTAX      OCTET STRING (SIZE (0..63))
+
+JmJobStringTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "To facilitate internationalization, this TC represents
+        information using any coded character set registered by IANA as
+        specified in section 3.7.  While it is recommended that the
+        coded character set be UTF-8 [UTF-8], the actual coded
+        character set SHALL be indicated by the value of the
+        jobCodedCharSet(8) attribute for the job.
+
+        See section 3.6.2, entitled: 'Text supplied by the job
+        submitter'."
+    SYNTAX      OCTET STRING (SIZE (0..63))
+
+JmNaturalLanguageTagTC  ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "An IETF RFC 1766-compliant 'language tag', with zero or more
+        sub-tags that identify a natural language.  While RFC 1766
+        specifies that the US-ASCII values are case-insensitive, this
+        MIB specification requires that all characters SHALL be lower
+        case in order to simplify comparing by management applications.
+
+        See section 3.6.1, entitled: 'Text generated by the server or
+        device' and section 3.6.2, entitled: 'Text supplied by the job
+        submitter'."
+    SYNTAX      OCTET STRING (SIZE (0..63))
+
+JmTimeStampTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The simple time at which an event took place.  The units are
+        in seconds since the system was booted.
+
+        NOTE - JmTimeStampTC is defined in units of seconds, rather
+        than 100ths of seconds, so as to be simpler for agents to
+        implement (even if they have to implement the 100ths of a
+        second to comply with implementing sysUpTime in MIB-II[mib-
+        II].)
+
+        NOTE - JmTimeStampTC is defined as an Integer32 so that it can
+        be used as a value of an attribute, i.e., as a value of the
+        jmAttributeValueAsInteger object.  The TimeStamp textual-
+        convention defined in SNMPv2-TC [SMIv2-TC] is defined as an
+        APPLICATION 3 IMPLICIT INTEGER tag, not an Integer32 which is
+        defined in SNMPv2-SMI [SMIv2-TC] as UNIVERSAL 2 IMPLICIT
+        INTEGER, so cannot be used in this MIB as one of the values of
+        jmAttributeValueAsInteger."
+    SYNTAX      INTEGER (0..2147483647)
+
+JmJobSourcePlatformTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The source platform type that can submit jobs to servers or
+        devices in any of the 3 configurations.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2.  See also
+
+        IANA operating-system-names registry."
+    SYNTAX      INTEGER {
+        other(1),
+        unknown(2),
+        sptUNIX(3),           -- UNIX
+        sptOS2(4),            -- OS/2
+        sptPCDOS(5),          -- DOS
+        sptNT(6),             -- NT
+        sptMVS(7),            -- MVS
+        sptVM(8),             -- VM
+        sptOS400(9),          -- OS/400
+        sptVMS(10),           -- VMS
+        sptWindows(11),       -- Windows
+        sptNetWare(12)        -- NetWare
+    }
+
+JmFinishingTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The type of finishing operation.
+
+        These values are the same as the enum values of the IPP
+        'finishings' attribute.  See Section 3.7.1.2.
+
+        other(1),
+            Some other finishing operation besides one of the specified
+            or registered values.
+
+        unknown(2),
+            The finishing is unknown.
+
+        none(3),
+            Perform no finishing.
+
+        staple(4),
+            Bind the document(s) with one or more staples. The exact
+            number and placement of the staples is site-defined.
+
+        punch(5),
+            Holes are required in the finished document. The exact
+            number and placement of the holes is site-defined.  The
+            punch specification MAY be satisfied (in a site- and
+            implementation-specific manner) either by
+            drilling/punching, or by substituting pre-drilled media.
+
+        cover(6),
+            Select a non-printed (or pre-printed) cover for the
+            document. This does not supplant the specification of a
+            printed cover (on cover stock medium) by the document
+            itself.
+
+        bind(7)
+            Binding is to be applied to the document; the type and
+            placement of the binding is product-specific.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2."
+    SYNTAX      INTEGER {
+        other(1),
+        unknown(2),
+        none(3),
+        staple(4),
+        punch(5),
+        cover(6),
+        bind(7)
+    }
+
+JmPrintQualityTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Print quality settings.
+
+        These values are the same as the enum values of the IPP 'print-
+        quality' attribute.  See Section 3.7.1.2.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2."
+    SYNTAX      INTEGER {
+        other(1),    -- Not one of the specified or registered
+                     -- values.
+        unknown(2),  -- The actual value is unknown.
+        draft(3),    -- Lowest quality available on the printer.
+        normal(4),   -- Normal or intermediate quality on the
+                     -- printer.
+        high(5)      -- Highest quality available on the printer.
+    }
+
+JmPrinterResolutionTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Printer resolutions.
+
+        Nine octets consisting of two 4-octet SIGNED-INTEGERs followed
+
+        by a SIGNED-BYTE.  The values are the same as those specified
+        in the Printer MIB [printmib]. The first SIGNED-INTEGER
+        contains the value of prtMarkerAddressabilityXFeedDir.  The
+        second SIGNED-INTEGER contains the value of
+        prtMarkerAddressabilityFeedDir.  The SIGNED-BYTE contains the
+        value of prtMarkerAddressabilityUnit.
+
+        Note: the latter value is either 3 (tenThousandsOfInches) or 4
+        (micrometers) and the addressability is in 10,000 units of
+        measure. Thus the SIGNED-INTEGERs represent integral values in
+        either dots-per-inch or dots-per-centimeter.
+
+        The syntax is the same as the IPP 'printer-resolution'
+        attribute.  See Section 3.7.1.2."
+    SYNTAX      OCTET STRING (SIZE(9))
+
+JmTonerEconomyTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Toner economy settings.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2."
+    SYNTAX      INTEGER {
+        unknown(2),    -- unknown.
+        off(3),        -- Off.  Normal.  Use full toner.
+        on(4)          -- On.  Use less toner than normal.
+    }
+
+JmBooleanTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Boolean true or false value.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2."
+    SYNTAX      INTEGER {
+        unknown(2),    -- unknown.
+        false(3),      -- FALSE.
+        true(4)        -- TRUE.
+    }
+
+JmMediumTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Identifies the type of medium.
+
+        other(1),
+            The type is neither one of the values listed in this
+            specification nor a registered value.
+
+        unknown(2),
+            The type is not known.
+
+        stationery(3),
+            Separately cut sheets of an opaque material.
+
+        transparency(4),
+            Separately cut sheets of a transparent material.
+
+        envelope(5),
+            Envelopes that can be used for conventional mailing
+            purposes.
+
+        envelopePlain(6),
+            Envelopes that are not preprinted and have no windows.
+
+        envelopeWindow(7),
+            Envelopes that have windows for addressing purposes.
+
+        continuousLong(8),
+            Continuously connected sheets of an opaque material
+            connected along the long edge.
+
+        continuousShort(9),
+            Continuously connected sheets of an opaque material
+            connected along the short edge.
+
+        tabStock(10),
+            Media with tabs.
+
+        multiPartForm(11),
+            Form medium composed of multiple layers not pre-attached to
+            one another;  each sheet MAY be drawn separately from an
+            input source.
+
+        labels(12),
+            Label-stock.
+
+        multiLayer(13)
+            Form medium composed of multiple layers which are pre-
+            attached to one another, e.g. for use with impact printers.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2.  These enum
+        values correspond to the keyword name strings of the
+        prtInputMediaType object in the Printer MIB [print-mib].  There
+        is no printer description attribute in IPP/1.0 that represents
+        these values."
+    SYNTAX      INTEGER {
+        other(1),
+        unknown(2),
+        stationery(3),
+        transparency(4),
+        envelope(5),
+        envelopePlain(6),
+        envelopeWindow(7),
+        continuousLong(8),
+        continuousShort(9),
+        tabStock(10),
+        multiPartForm(11),
+        labels(12),
+        multiLayer(13)
+    }
+
+JmJobCollationTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "This value is the type of job collation.  Implementations that
+        don't support multiple documents or don't support multiple
+        copies SHALL NOT support the uncollatedDocuments(5) value.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2. See also
+        Section 3.4, entitled 'Monitoring Job Progress'."
+    SYNTAX      INTEGER {
+        other(1),
+        unknown(2),
+        uncollatedSheets(3),    -- sheets within each document copy
+                                -- are not collated: 1 1 ..., 2 2 ...,
+                                -- No corresponding value of IPP
+                                -- "multiple-document-handling"
+        collatedDocuments(4),   -- internal collated sheets,
+                                -- documents: A, B, A, B, ...
+                                -- Corresponds to IPP "multiple-
+                                -- document-handling"='separate-
+                                -- documents-collated-copies'
+        uncollatedDocuments(5)  -- internal collated sheets,
+                                -- documents: A, A, ..., B, B, ...
+                                -- Corresponds to IPP "multiple-
+                                -- document-handling"='separate-
+                                -- documents-uncollated-copies'
+
+    }
+
+JmJobSubmissionIDTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Identifies the format type of a job submission ID.
+
+        Each job submission ID is a fixed-length, 48-octet printable
+        US-ASCII [US-ASCII] coded character string containing no
+        control characters, consisting of the fields defined in section
+        3.5.1.
+
+        This is like a type 2 enumeration.  See section 3.7.3."
+    SYNTAX    OCTET STRING(SIZE(1)) -- ASCII '0'-'9', 'A'-'Z', 'a'-'z'
+
+JmJobStateTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The current state of the job (pending, processing, completed,
+        etc.).  The following figure shows the normal job state
+        transitions:
+
+                                                    +----> canceled(7)
+                                                   /
+    +---> pending(3) -------> processing(5) ------+------> completed(9)
+    |         ^                      ^             \
+--->+         |                      |              +----> aborted(8)
+    |         v                      v             /
+    +---> pendingHeld(4)  processingStopped(6) ---+
+
+                Figure 4 - Normal Job State Transitions
+
+        Normally a job progresses from left to right.  Other state
+        transitions are unlikely, but are not forbidden.  Not shown are
+        the transitions to the canceled state from the pending,
+        pendingHeld, and processingStopped states.
+
+        Jobs in the pending, processing, and processingStopped states
+        are called 'active', while jobs in the pendingHeld, canceled,
+        aborted, and completed states are called 'inactive'.  Jobs
+        reach one of the three terminal states: completed, canceled, or
+        aborted, after the jobs have completed all activity, and all
+        MIB objects and attributes have reached their final values for
+        the job.
+
+        These values are the same as the enum values of the IPP 'job-
+        state' job attribute.  See Section 3.7.1.2.
+
+        unknown(2),
+            The job state is not known, or its state is indeterminate.
+
+        pending(3),
+            The job is a candidate to start processing, but is not yet
+            processing.
+
+        pendingHeld(4),
+            The job is not a candidate for processing for any number of
+            reasons but will return to the pending state as soon as the
+            reasons are no longer present.  The job's
+            jmJobStateReasons1 object and/or jobStateReasonsN (N=2..4)
+            attributes SHALL indicate why the job is no longer a
+            candidate for processing.  The reasons are represented as
+            bits in the jmJobStateReasons1 object and/or
+            jobStateReasonsN (N=2..4) attributes.  See the
+            JmJobStateReasonsNTC (N=1..4) textual convention for the
+            specification of each reason.
+
+        processing(5),
+            One or more of:
+
+            1.  the job is using, or is attempting to use, one or
+            more purely software processes that are analyzing,
+            creating, or interpreting a PDL, etc.,
+            2.  the job is using, or is attempting to use, one or
+            more hardware devices that are interpreting a PDL,
+            making mark on a medium, and/or performing finishing,
+            such as stapling, etc.,  OR
+
+            3. (configuration 2) the server has made the job ready
+            for printing, but the output device is not yet printing
+            it, either because the job hasn't reached the output
+            device or because the job is queued in the output
+            device or some other spooler, awaiting the output
+            device to print it.
+
+            When the job is in the processing state, the entire job
+            state includes the detailed status represented in the
+            device MIB indicated by the hrDeviceIndex value of the
+            job's physicalDevice attribute, if the agent implements
+            such a device MIB.
+
+            Implementations MAY, though they NEED NOT, include
+
+            additional values in the job's jmJobStateReasons1 object
+            to indicate the progress of the job, such as adding the
+            jobPrinting value to indicate when the device is actually
+            making marks on a medium and/or the processingToStopPoint
+            value to indicate that the server or device is in the
+            process of canceling or aborting the job.
+
+        processingStopped(6),
+            The job has stopped while processing for any number of
+            reasons and will return to the processing state as soon
+            as the reasons are no longer present.
+
+            The job's jmJobStateReasons1 object and/or the job's
+            jobStateReasonsN (N=2..4) attributes MAY indicate why the
+            job has stopped processing.  For example, if the output
+            device is stopped, the deviceStopped value MAY be
+            included in the job's jmJobStateReasons1 object.
+
+            NOTE - When an output device is stopped, the device
+            usually indicates its condition in human readable form
+            at the device.  The management application can obtain
+             more complete device status remotely by querying the
+            appropriate device MIB using the job's deviceIndex
+            attribute(s), if the agent implements such a device MIB
+
+        canceled(7),
+            A client has canceled the job and the server or device
+            has completed canceling the job AND all MIB objects and
+            attributes have reached their final values for the job.
+            While the server or device is canceling the job, the
+            job's jmJobStateReasons1 object SHOULD contain the
+            processingToStopPoint value and one of the
+            canceledByUser, canceledByOperator, or canceledAtDevice
+            values.  The canceledByUser, canceledByOperator, or
+            canceledAtDevice values remain while the job is in the
+            canceled state.
+
+        aborted(8),
+            The job has been aborted by the system, usually while the
+            job was in the processing or processingStopped state and
+            the server or device has completed aborting the job AND
+            all MIB objects and attributes have reached their final
+            values for the job.  While the server or device is
+            aborting the job, the job's jmJobStateReasons1 object MAY
+            contain the processingToStopPoint and abortedBySystem
+            values.  If implemented, the abortedBySystem value SHALL
+            remain while the job is in the aborted state.
+
+        completed(9)
+            The job has completed successfully or with warnings or
+            errors after processing and all of the media have been
+            successfully stacked in the appropriate output bin(s) AND
+            all MIB objects and attributes have reached their final
+            values for the job.  The job's jmJobStateReasons1 object
+            SHOULD contain one of: completedSuccessfully,
+            completedWithWarnings, or completedWithErrors values.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2."
+    SYNTAX      INTEGER {
+        unknown(2),
+        pending(3),
+        pendingHeld(4),
+        processing(5),
+        processingStopped(6),
+        canceled(7),
+        aborted(8),
+        completed(9)
+    }
+
+JmAttributeTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The type of the attribute which identifies the attribute.
+
+        NOTE - The enum assignments are grouped logically with values
+        assigned in groups of 20, so that additional values may be
+        registered in the future and assigned a value that is part of
+        their logical grouping.
+
+        Values in the range 2**30 to 2**31-1 are reserved for private
+        or experimental usage.  This range corresponds to the same
+        range reserved in IPP.  Implementers are warned that use of
+        such values may conflict with other implementations.
+        Implementers are encouraged to request registration of enum
+        values following the procedures in Section 3.7.1.
+
+        See Section 3.2 entitled 'The Attribute Mechanism' for a
+        description of this textual-convention and its use in the
+        jmAttributeTable.  See Section 3.3.8 for the specification of
+        each attribute.  The comment(s) after each enum assignment
+        specifies the data type(s) of the attribute.
+
+        This is a type 2 enumeration.  See Section 3.7.1.2."
+    SYNTAX      INTEGER {
+        other(1),                       -- Integer32 (-2..2147483647)
+                                        -- AND/OR
+                                        -- OCTET STRING(SIZE(0..63))
+
+        -- Job State attributes:
+        jobStateReasons2(3),            -- JmJobStateReasons2TC
+        jobStateReasons3(4),            -- JmJobStateReasons3TC
+        jobStateReasons4(5),            -- JmJobStateReasons4TC
+        processingMessage(6),           -- JmUTF8StringTC (SIZE(0..63))
+        processingMessageNaturalLangTag(7),
+                                        -- OCTET STRING(SIZE(0..63))
+        jobCodedCharSet(8),             -- CodedCharSet
+        jobNaturalLanguageTag(9),       -- OCTET STRING(SIZE(0..63))
+
+        -- Job Identification attributes:
+        jobURI(20),                     -- OCTET STRING(SIZE(0..63))
+        jobAccountName(21),             -- OCTET STRING(SIZE(0..63))
+        serverAssignedJobName(22),      -- JmJobStringTC (SIZE(0..63))
+        jobName(23),                    -- JmJobStringTC (SIZE(0..63))
+        jobServiceTypes(24),            -- JmJobServiceTypesTC
+        jobSourceChannelIndex(25),      -- Integer32 (0..2147483647)
+        jobSourcePlatformType(26),      -- JmJobSourcePlatformTypeTC
+        submittingServerName(27),       -- JmJobStringTC (SIZE(0..63))
+        submittingApplicationName(28),  -- JmJobStringTC (SIZE(0..63))
+        jobOriginatingHost(29),         -- JmJobStringTC (SIZE(0..63))
+        deviceNameRequested(30),        -- JmJobStringTC (SIZE(0..63))
+        queueNameRequested(31),         -- JmJobStringTC (SIZE(0..63))
+        physicalDevice(32),             -- hrDeviceIndex
+                                        -- AND/OR
+                                        -- JmUTF8StringTC (SIZE(0..63))
+        numberOfDocuments(33),          -- Integer32 (-2..2147483647)
+        fileName(34),                   -- JmJobStringTC (SIZE(0..63))
+        documentName(35),               -- JmJobStringTC (SIZE(0..63))
+        jobComment(36),                 -- JmJobStringTC (SIZE(0..63))
+        documentFormatIndex(37),        -- Integer32 (0..2147483647)
+        documentFormat(38),             -- PrtInterpreterLangFamilyTC
+                                        -- AND/OR
+                                        -- OCTET STRING(SIZE(0..63))
+
+        -- Job Parameter attributes:
+        jobPriority(50),                -- Integer32 (-2..100)
+        jobProcessAfterDateAndTime(51), -- DateAndTime (SNMPv2-TC)
+        jobHold(52),                    -- JmBooleanTC
+        jobHoldUntil(53),               -- JmJobStringTC (SIZE(0..63))
+        outputBin(54),                  -- Integer32 (0..2147483647)
+                                        -- AND/OR
+
+                                        -- JmJobStringTC (SIZE(0..63))
+        sides(55),                      -- Integer32 (-2..2)
+        finishing(56),                  -- JmFinishingTC
+
+        -- Image Quality attributes:
+        printQualityRequested(70),      -- JmPrintQualityTC
+        printQualityUsed(71),           -- JmPrintQualityTC
+        printerResolutionRequested(72), -- JmPrinterResolutionTC
+        printerResolutionUsed(73),      -- JmPrinterResolutionTC
+        tonerEcomonyRequested(74),      -- JmTonerEconomyTC
+        tonerEcomonyUsed(75),           -- JmTonerEconomyTC
+        tonerDensityRequested(76),      -- Integer32 (-2..100)
+        tonerDensityUsed(77),           -- Integer32 (-2..100)
+
+        -- Job Progress attributes:
+        jobCopiesRequested(90),         -- Integer32 (-2..2147483647)
+        jobCopiesCompleted(91),         -- Integer32 (-2..2147483647)
+        documentCopiesRequested(92),    -- Integer32 (-2..2147483647)
+        documentCopiesCompleted(93),    -- Integer32 (-2..2147483647)
+        jobKOctetsTransferred(94),      -- Integer32 (-2..2147483647)
+        sheetCompletedCopyNumber(95),   -- Integer32 (-2..2147483647)
+        sheetCompletedDocumentNumber(96),
+                                        -- Integer32 (-2..2147483647)
+        jobCollationType(97),           -- JmJobCollationTypeTC
+
+        -- Impression attributes:
+        impressionsSpooled(110),        -- Integer32 (-2..2147483647)
+        impressionsSentToDevice(111),   -- Integer32 (-2..2147483647)
+        impressionsInterpreted(112),    -- Integer32 (-2..2147483647)
+        impressionsCompletedCurrentCopy(113),
+                                        -- Integer32 (-2..2147483647)
+        fullColorImpressionsCompleted(114),
+                                        -- Integer32 (-2..2147483647)
+        highlightColorImpressionsCompleted(115),
+                                        -- Integer32 (-2..2147483647)
+
+        -- Page attributes:
+        pagesRequested(130),            -- Integer32 (-2..2147483647)
+        pagesCompleted(131),            -- Integer32 (-2..2147483647)
+        pagesCompletedCurrentCopy(132), -- Integer32 (-2..2147483647)
+
+        -- Sheet attributes:
+        sheetsRequested(150),           -- Integer32 (-2..2147483647)
+        sheetsCompleted(151),           -- Integer32 (-2..2147483647)
+        sheetsCompletedCurrentCopy(152),-- Integer32 (-2..2147483647)
+
+        -- Resource attributes:
+
+        mediumRequested(170),           -- JmMediumTypeTC
+                                        -- AND/OR
+                                        -- JmJobStringTC (SIZE(0..63))
+        mediumConsumed(171),            -- Integer32 (-2..2147483647)
+                                        -- AND
+                                        -- JmJobStringTC (SIZE(0..63))
+        colorantRequested(172),         -- Integer32 (-2..2147483647)
+                                        -- AND/OR
+                                        -- JmJobStringTC (SIZE(0..63))
+        colorantConsumed(173),          -- Integer32 (-2..2147483647)
+                                        -- AND/OR
+                                        -- JmJobStringTC (SIZE(0..63))
+        mediumTypeConsumed(174),        -- Integer32 (-2..2147483647)
+                                        -- AND
+                                        -- JmJobStringTC (SIZE(0..63))
+        mediumSizeConsumed(175),        -- Integer32 (-2..2147483647)
+                                        -- AND
+                                        -- JmJobStringTC (SIZE(0..63))
+
+        -- Time attributes:
+        jobSubmissionToServerTime(190), -- JmTimeStampTC
+                                        -- AND/OR
+                                        -- DateAndTime
+        jobSubmissionTime(191),         -- JmTimeStampTC
+                                        -- AND/OR
+                                        -- DateAndTime
+        jobStartedBeingHeldTime(192),   -- JmTimeStampTC
+                                        -- AND/OR
+                                        -- DateAndTime
+        jobStartedProcessingTime(193),  -- JmTimeStampTC
+                                        -- AND/OR
+                                        -- DateAndTime
+        jobCompletionTime(194),         -- JmTimeStampTC
+                                        -- AND/OR
+                                        -- DateAndTime
+        jobProcessingCPUTime(195)       -- Integer32 (-2..2147483647)
+    }
+
+JmJobServiceTypesTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Specifies the type(s) of service to which the job has been
+        submitted (print, fax, scan, etc.).  The service type is
+        represented as an enum that is bit encoded with each job
+        service type so that more general and arbitrary services can be
+        created, such as services with more than one destination type,
+        or ones with only a source or only a destination.  For example,
+        a job service might scan, faxOut, and print a single job.  In
+        this case, three bits would be set in the jobServiceTypes
+        attribute, corresponding to the hexadecimal values: 0x8 + 0x20
+        + 0x4, respectively, yielding: 0x2C.
+
+        Whether this attribute is set from a job attribute supplied by
+        the job submission client or is set by the recipient job
+        submission server or device depends on the job submission
+        protocol.  With either implementation, the agent SHALL return a
+        non-zero value for this attribute indicating the type of the
+        job.
+
+        One of the purposes of this attribute is to permit a requester
+        to filter out jobs that are not of interest.  For example, a
+        printer operator MAY only be interested in jobs that include
+        printing.  That is why the attribute is in the job
+        identification category.
+
+        The following service component types are defined (in
+        hexadecimal) and are assigned a separate bit value for use with
+        the jobServiceTypes attribute:
+
+        other                             0x1
+            The job contains some instructions that are not one of the
+            identified types.
+
+        unknown                           0x2
+            The job contains some instructions whose type is unknown to
+            the agent.
+
+        print                             0x4
+            The job contains some instructions that specify printing
+
+        scan                              0x8
+            The job contains some instructions that specify scanning
+
+        faxIn                             0x10
+            The job contains some instructions that specify receive fax
+
+        faxOut                            0x20
+            The job contains some instructions that specify sending fax
+
+        getFile                           0x40
+            The job contains some instructions that specify accessing
+            files or documents
+
+        putFile                           0x80
+
+            The job contains some instructions that specify storing
+            files or documents
+
+        mailList                          0x100
+            The job contains some instructions that specify
+            distribution of documents using an electronic mail system.
+
+        These bit definitions are the equivalent of a type 2 enum
+        except that combinations of them MAY be used together.  See
+        section 3.7.1.2."
+    SYNTAX      INTEGER (0..2147483647)   -- 31 bits, all but sign bit
+
+JmJobStateReasons1TC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The JmJobStateReasonsNTC (N=1..4) textual-conventions are used
+        with the jmJobStateReasons1 object and jobStateReasonsN
+        (N=2..4), respectively, to provide additional information
+        regarding the current jmJobState object value.  These values
+        MAY be used with any job state or states for which the reason
+        makes sense.  See section 3.3.9.1 for the specification of each
+        bit value defined for use with the JmJobStateReasons1TC.
+
+        These bit definitions are the equivalent of a type 2 enum
+        except that combinations of bits may be used together.  See
+        section 3.7.1.2."
+    SYNTAX      INTEGER (0..2147483647)   -- 31 bits, all but sign bit
+
+JmJobStateReasons2TC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "This textual-convention is used with the jobStateReasons2
+        attribute to provides additional information regarding the
+        jmJobState object.  See section 3.3.9.2 for the specification
+        of JmJobStateReasons2TC.  See section 3.3.9.1 for the
+        description under JmJobStateReasons1TC for additional
+        information that applies to all reasons.
+
+        These bit definitions are the equivalent of a type 2 enum
+        except that combinations of them may be used together.  See
+        section 3.7.1.2."
+    SYNTAX      INTEGER (0..2147483647)   -- 31 bits, all but sign bit
+
+JmJobStateReasons3TC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "This textual-convention is used with the jobStateReasons3
+        attribute to provides additional information regarding the
+        jmJobState object.  See section 3.3.9.3 for the specification
+        of JmJobStateReasons3TC.  See section 3.3.9.1 for the
+        description under JmJobStateReasons1TC for additional
+        information that applies to all reasons.
+
+        These bit definitions are the equivalent of a type 2 enum
+        except that combinations of them may be used together.  See
+        section 3.7.1.2.  "
+    SYNTAX      INTEGER (0..2147483647)   -- 31 bits, all but sign bit
+
+JmJobStateReasons4TC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "This textual-convention is used in the jobStateReasons4
+        attribute to provides additional information regarding the
+        jmJobState object.  See section 3.3.9.4 for the specification
+        of JmJobStateReasons4TC.  See section 3.3.9.1 for the
+        description under JmJobStateReasons1TC for additional
+        information that applies to all reasons.
+
+        These bit definitions are the equivalent of a type 2 enum
+        except that combinations of them may be used together.  See
+        section 3.7.1.2."
+    SYNTAX      INTEGER (0..2147483647)   -- 31 bits, all but sign bit
+
+jobmonMIBObjects  OBJECT IDENTIFIER  ::= { jobmonMIB 1 }
+
+-- The General Group (MANDATORY)
+
+-- The jmGeneralGroup consists entirely of the jmGeneralTable.
+
+jmGeneral  OBJECT IDENTIFIER ::= { jobmonMIBObjects 1 }
+
+jmGeneralTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JmGeneralEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The jmGeneralTable consists of information of a general nature
+        that are per-job-set, but are not per-job.  See Section 2
+        entitled 'Terminology and Job Model' for the definition of a
+        job set.
+
+        The MANDATORY-GROUP macro specifies that this group is
+        MANDATORY."
+    ::= { jmGeneral 1 }
+
+jmGeneralEntry  OBJECT-TYPE
+    SYNTAX      JmGeneralEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a job set (queue).
+
+        An entry SHALL exist in this table for each job set."
+    INDEX  { jmGeneralJobSetIndex }
+    ::= { jmGeneralTable 1 }
+
+JmGeneralEntry ::= SEQUENCE {
+    jmGeneralJobSetIndex                  Integer32 (1..32767),
+    jmGeneralNumberOfActiveJobs           Integer32 (0..2147483647),
+    jmGeneralOldestActiveJobIndex         Integer32 (0..2147483647),
+    jmGeneralNewestActiveJobIndex         Integer32 (0..2147483647),
+    jmGeneralJobPersistence               Integer32 (15..2147483647),
+    jmGeneralAttributePersistence         Integer32 (15..2147483647),
+    jmGeneralJobSetName                   JmUTF8StringTC (SIZE(0..63))
+}
+
+jmGeneralJobSetIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..32767)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique value for each job set in this MIB.  The jmJobTable
+        and jmAttributeTable tables have this same index as their
+        primary index.
+
+        The value(s) of the jmGeneralJobSetIndex SHALL be persistent
+        across power cycles, so that clients that have retained
+        jmGeneralJobSetIndex values will access the same job sets upon
+        subsequent power-up.
+
+        An implementation that has only one job set, such as a printer
+
+        with a single queue, SHALL hard code this object with the value
+        1.
+
+        See Section 2 entitled 'Terminology and Job Model' for the
+        definition of a job set.
+        Corresponds to the first index in jmJobTable and
+        jmAttributeTable."
+    ::= { jmGeneralEntry 1 }
+
+jmGeneralNumberOfActiveJobs OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current number of 'active' jobs in the jmJobIDTable,
+        jmJobTable, and jmAttributeTable, i.e., the total number of
+        jobs that are in the pending, processing, or processingStopped
+        states.  See the JmJobStateTC textual-convention for the exact
+        specification of the semantics of the job states."
+    DEFVAL      { 0 }      -- no jobs
+    ::= { jmGeneralEntry 2 }
+
+jmGeneralOldestActiveJobIndex  OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The jmJobIndex of the oldest job that is still in one of the
+        'active' states (pending, processing, or processingStopped).
+        In other words, the index of the 'active' job that has been in
+        the job tables the longest.
+
+        If there are no active jobs, the agent SHALL set the value of
+        this object to 0.
+
+        See Section 3.2 entitled 'The Job Tables and the Oldest Active
+        and Newest Active Indexes' for a description of the usage of
+        this object."
+    DEFVAL      { 0 }      -- no active jobs
+    ::= { jmGeneralEntry 3 }
+
+jmGeneralNewestActiveJobIndex  OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The jmJobIndex of the newest job that is in one of the
+        'active' states (pending, processing, or processingStopped).
+        In other words, the index of the 'active' job that has been
+        most recently added to the job tables.
+
+        When all jobs become 'inactive', i.e., enter the pendingHeld,
+        completed, canceled, or aborted states, the agent SHALL set the
+        value of this object to 0.
+
+        See Section 3.2 entitled 'The Job Tables and the Oldest Active
+        and Newest Active Indexes' for a description of the usage of
+        this object."
+    DEFVAL      { 0 }      -- no active jobs
+    ::= { jmGeneralEntry 4 }
+
+jmGeneralJobPersistence OBJECT-TYPE
+    SYNTAX      Integer32 (15..2147483647)
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The minimum time in seconds for this instance of the Job Set
+        that an entry SHALL remain in the jmJobIDTable and jmJobTable
+        after processing has completed, i.e., the minimum time in
+        seconds starting when the job enters the completed, canceled,
+        or aborted state.
+
+        Configuring this object is implementation-dependent.
+
+        This value SHALL be equal to or greater than the value of
+        jmGeneralAttributePersistence.  This value SHOULD be at least
+        60 which gives a monitoring or accounting application one
+        minute in which to poll for job data."
+    DEFVAL      { 60 }          -- one minute
+    ::= { jmGeneralEntry 5 }
+
+jmGeneralAttributePersistence OBJECT-TYPE
+    SYNTAX      Integer32 (15..2147483647)
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The minimum time in seconds for this instance of the Job Set
+        that an entry SHALL remain in the jmAttributeTable after
+        processing has completed , i.e., the time in seconds starting
+        when the job enters the completed, canceled, or aborted state.
+
+        Configuring this object is implementation-dependent.
+
+        This value SHOULD be at least 60 which gives a monitoring or
+        accounting application one minute in which to poll for job
+        data."
+    DEFVAL      { 60 }          -- one minute
+    ::= { jmGeneralEntry 6 }
+
+jmGeneralJobSetName OBJECT-TYPE
+    SYNTAX      JmUTF8StringTC (SIZE(0..63))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The human readable name of this job set assigned by the system
+        administrator (by means outside of this MIB).  Typically, this
+        name SHOULD be the name of the job queue.  If a server or
+        device has only a single job set, this object can be the
+        administratively assigned name of the server or device itself.
+        This name does not need to be unique, though each job set in a
+        single Job Monitoring MIB SHOULD have distinct names.
+
+        NOTE - If the job set corresponds to a single printer and the
+        Printer MIB is implemented, this value SHOULD be the same as
+        the prtGeneralPrinterName object in the draft Printer MIB
+        [print-mib-draft].  If the job set corresponds to an IPP
+        Printer, this value SHOULD be the same as the IPP 'printer-
+        name' Printer attribute.
+
+        NOTE - The purpose of this object is to help the user of the
+        job monitoring application distinguish between several job sets
+        in implementations that support more than one job set.
+
+        See the OBJECT compliance macro for the minimum maximum length
+        required for conformance."
+    DEFVAL      { ''H }      -- empty string
+    ::= { jmGeneralEntry 7 }
+
+-- The Job ID Group (MANDATORY)
+
+-- The jmJobIDGroup consists entirely of the jmJobIDTable.
+
+jmJobID  OBJECT IDENTIFIER ::= { jobmonMIBObjects 2 }
+
+jmJobIDTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JmJobIDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The jmJobIDTable provides a correspondence map (1) between the
+        job submission ID that a client uses to refer to a job and (2)
+        the jmGeneralJobSetIndex and jmJobIndex that the Job Monitoring
+        MIB agent assigned to the job and that are used to access the
+        job in all of the other tables in the MIB.  If a monitoring
+        application already knows the jmGeneralJobSetIndex and the
+        jmJobIndex of the job it is querying, that application NEED NOT
+        use the jmJobIDTable.
+
+        The MANDATORY-GROUP macro specifies that this group is
+        MANDATORY."
+    ::= { jmJobID 1 }
+
+jmJobIDEntry  OBJECT-TYPE
+    SYNTAX      JmJobIDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The map from (1) the jmJobSubmissionID to (2) the
+        jmGeneralJobSetIndex and jmJobIndex.
+
+        An entry SHALL exist in this table for each job currently known
+        to the agent for all job sets and job states.  There MAY be
+        more than one jmJobIDEntry that maps to a single job.  This
+        many to one mapping can occur when more than one network entity
+        along the job submission path supplies a job submission ID.
+        See Section 3.5.  However, each job SHALL appear once and in
+        one and only one job set."
+    INDEX  { jmJobSubmissionID }
+    ::= { jmJobIDTable 1 }
+
+JmJobIDEntry ::= SEQUENCE {
+    jmJobSubmissionID                     OCTET STRING(SIZE(48)),
+    jmJobIDJobSetIndex                    Integer32 (0..32767),
+    jmJobIDJobIndex                       Integer32 (0..2147483647)
+}
+
+jmJobSubmissionID OBJECT-TYPE
+    SYNTAX      OCTET STRING(SIZE(48))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A quasi-unique 48-octet fixed-length string ID which
+        identifies the job within a particular client-server
+        environment.  There are multiple formats for the
+        jmJobSubmissionID.  Each format SHALL be uniquely identified.
+        See the JmJobSubmissionIDTypeTC textual convention.  Each
+        format SHALL be registered using the procedures of a type 2
+        enum.  See section 3.7.3 entitled: 'PWG Registration of Job
+        Submission Id Formats'.
+
+        If the requester (client or server) does not supply a job
+        submission ID in the job submission protocol, then the
+        recipient (server or device) SHALL assign a job submission ID
+        using any of the standard formats that have been reserved for
+        agents and adding the final 8 octets to distinguish the ID from
+        others submitted from the same requester.
+
+        The monitoring application, whether in the client or running
+        separately, MAY use the job submission ID to help identify
+        which jmJobIndex was assigned by the agent, i.e., in which row
+        the job information is in the other tables.
+
+        NOTE - fixed-length is used so that a management application
+        can use a shortened GetNext varbind (in SNMPv1 and SNMPv2) in
+        order to get the next submission ID, disregarding the remainder
+        of the ID in order to access jobs independent of the trailing
+        identifier part, e.g., to get all jobs submitted by a
+        particular jmJobOwner or submitted from a particular MAC
+        address.
+
+        See the JmJobSubmissionIDTypeTC textual convention.
+        See APPENDIX B - Support of Job Submission Protocols."
+    ::= { jmJobIDEntry 1 }
+
+jmJobIDJobSetIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..32767)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the value of the jmGeneralJobSetIndex for
+        the job with the jmJobSubmissionID value, i.e., the job set
+        index of the job set in which the job was placed when that
+        server or device accepted the job.  This 16-bit value in
+
+        combination with the jmJobIDJobIndex value permits the
+        management application to access the other tables to obtain the
+        job-specific objects for this job.
+
+        See jmGeneralJobSetIndex in the jmGeneralTable."
+    DEFVAL      { 0 }      -- 0 indicates no job set index
+    ::= { jmJobIDEntry 2 }
+
+jmJobIDJobIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains the value of the jmJobIndex for the job
+        with the jmJobSubmissionID value, i.e., the job index for the
+        job when the server or device accepted the job.  This value, in
+        combination with the jmJobIDJobSetIndex value, permits the
+        management application to access the other tables to obtain the
+        job-specific objects for this job.
+
+        See jmJobIndex in the jmJobTable."
+    DEFVAL      { 0 }      -- 0 indicates no jmJobIndex value.
+    ::= { jmJobIDEntry 3 }
+
+-- The Job Group (MANDATORY)
+
+-- The jmJobGroup consists entirely of the jmJobTable.
+
+jmJob  OBJECT IDENTIFIER ::= { jobmonMIBObjects 3 }
+
+jmJobTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JmJobEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The jmJobTable consists of basic job state and status
+        information for each job in a job set that (1) monitoring
+        applications need to be able to access in a single SNMP Get
+        operation, (2) that have a single value per job, and (3) that
+        SHALL always be implemented.
+
+        The MANDATORY-GROUP macro specifies that this group is
+        MANDATORY."
+    ::= { jmJob 1 }
+
+jmJobEntry  OBJECT-TYPE
+    SYNTAX      JmJobEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Basic per-job state and status information.
+
+        An entry SHALL exist in this table for each job, no matter what
+        the state of the job is.  Each job SHALL appear in one and only
+        one job set.
+
+        See Section 3.2 entitled 'The Job Tables'."
+    INDEX  { jmGeneralJobSetIndex, jmJobIndex }
+    ::= { jmJobTable 1 }
+
+JmJobEntry ::= SEQUENCE {
+    jmJobIndex                            Integer32 (1..2147483647),
+    jmJobState                            JmJobStateTC,
+    jmJobStateReasons1                    JmJobStateReasons1TC,
+    jmNumberOfInterveningJobs             Integer32 (-2..2147483647),
+    jmJobKOctetsPerCopyRequested          Integer32 (-2..2147483647),
+    jmJobKOctetsProcessed                 Integer32 (-2..2147483647),
+    jmJobImpressionsPerCopyRequested      Integer32 (-2..2147483647),
+    jmJobImpressionsCompleted             Integer32 (-2..2147483647),
+    jmJobOwner                            JmJobStringTC (SIZE(0..63))
+}
+
+jmJobIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The sequential, monatonically increasing identifier index for
+        the job generated by the server or device when that server or
+        device accepted the job.  This index value permits the
+        management application to access the other tables to obtain the
+        job-specific row entries.
+
+        See Section 3.2 entitled 'The Job Tables and the Oldest Active
+        and Newest Active Indexes'.
+        See Section 3.5 entitled 'Job Identification'.
+        See also jmGeneralNewestActiveJobIndex for the largest value of
+        jmJobIndex.
+        See JmJobSubmissionIDTypeTC for a limit on the size of this
+        index if the agent represents it as an 8-digit decimal number."
+    ::= { jmJobEntry 1 }
+
+jmJobState OBJECT-TYPE
+    SYNTAX      JmJobStateTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current state of the job (pending, processing, completed,
+        etc.).  Agents SHALL implement only those states which are
+        appropriate for the particular implementation.  However,
+        management applications SHALL be prepared to receive all the
+        standard job states.
+
+        The final value for this object SHALL be one of: completed,
+        canceled, or aborted.  The minimum length of time that the
+        agent SHALL maintain MIB data for a job in the completed,
+        canceled, or aborted state before removing the job data from
+        the jmJobIDTable and jmJobTable is specified by the value of
+        the jmGeneralJobPersistence object."
+    DEFVAL      { unknown }      -- default is unknown
+    ::= { jmJobEntry 2 }
+
+jmJobStateReasons1 OBJECT-TYPE
+    SYNTAX      JmJobStateReasons1TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Additional information about the job's current state, i.e.,
+        information that augments the value of the job's jmJobState
+        object.
+
+        Implementation of any reason values is OPTIONAL, but an agent
+        SHOULD return any reason information available.  These values
+        MAY be used with any job state or states for which the reason
+        makes sense.  Since the Job State Reasons will be more dynamic
+        than the Job State, it is recommended that a job monitoring
+        application read this object every time jmJobState is read.
+        When the agent cannot provide a reason for the current state of
+        the job, the value of the jmJobStateReasons1 object and
+        jobStateReasonsN attributes SHALL be 0.
+
+        The jobStateReasonsN (N=2..4) attributes provide further
+        additional information about the job's current state."
+    DEFVAL      { 0 }      -- no reasons
+    ::= { jmJobEntry 3 }
+
+jmNumberOfInterveningJobs OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of jobs that are expected to complete processing
+        before this job has completed processing according to the
+        implementation's queuing algorithm, if no other jobs were to be
+        submitted.  In other words, this value is the job's queue
+        position.  The agent SHALL return a value of 0 for this
+        attribute when the job is the next job to complete processing
+        (or has completed processing)."
+    DEFVAL      { 0 }      -- default is no intervening jobs.
+    ::= { jmJobEntry 4 }
+
+jmJobKOctetsPerCopyRequested OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total size in K (1024) octets of the document(s) being
+        requested to be processed in the job.  The agent SHALL round
+        the actual number of octets up to the next highest K.  Thus 0
+        octets is represented as '0', 1-1024 octets is represented as
+        '1', 1025-2048 is represented as '2', etc.
+
+        In computing this value, the server/device SHALL NOT include
+        the multiplicative factors contributed by (1) the number of
+        document copies, and (2) the number of job copies, independent
+        of whether the device can process multiple copies of the job or
+        document without making multiple passes over the job or
+        document data and independent of whether the output is collated
+        or not.  Thus the server/device computation is independent of
+        the implementation and indicates the size of the document(s)
+        measured in K octets independent of the number of copies."
+    DEFVAL      { -2 }      -- the default is unknown(-2)
+    ::= { jmJobEntry 5 }
+
+jmJobKOctetsProcessed OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of octets processed by the server or device
+
+        measured in units of K (1024) octets so far.  The agent SHALL
+        round the actual number of octets processed up to the next
+        higher K.  Thus 0 octets is represented as '0', 1-1024 octets
+        is represented as '1', 1025-2048 octets is '2', etc.  For
+        printing devices, this value is the number interpreted by the
+        page description language interpreter rather than what has been
+        marked on media.
+
+        For implementations where multiple copies are produced by the
+        interpreter with only a single pass over the data, the final
+        value SHALL be equal to the value of the
+        jmJobKOctetsPerCopyRequested object.  For implementations where
+        multiple copies are produced by the interpreter by processing
+        the data for each copy, the final value SHALL be a multiple of
+        the value of the jmJobKOctetsPerCopyRequested object.
+
+        NOTE - See the impressionsCompletedCurrentCopy and
+        pagesCompletedCurrentCopy attributes for attributes that are
+        reset on each document copy.
+
+        NOTE - The jmJobKOctetsProcessed object can be used with the
+        jmJobKOctetsPerCopyRequested object to provide an indication of
+        the relative progress of the job, provided that the
+        multiplicative factor is taken into account for some
+        implementations of multiple copies."
+    DEFVAL      { 0 }      -- default is no octets processed.
+    ::= { jmJobEntry 6 }
+
+jmJobImpressionsPerCopyRequested OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total size in number of impressions of the document(s)
+        submitted.
+
+        In computing this value, the server/device SHALL NOT include
+        the multiplicative factors contributed by (1) the number of
+        document copies, and (2) the number of job copies, independent
+        of whether the device can process multiple copies of the job or
+        document without making multiple passes over the job or
+        document data and independent of whether the output is collated
+        or not.  Thus the server/device computation is independent of
+        the implementation and reflects the size of the document(s)
+        measured in impressions independent of the number of copies.
+
+        See the definition of the term 'impression' in Section 2."
+    DEFVAL      { -2 }      -- default is unknown(-2)
+    ::= { jmJobEntry 7 }
+
+jmJobImpressionsCompleted OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of impressions completed for this job so far.
+        For printing devices, the impressions completed includes
+        interpreting, marking, and stacking the output.  For other
+        types of job services, the number of impressions completed
+        includes the number of impressions processed.
+
+        NOTE - See the impressionsCompletedCurrentCopy and
+        pagesCompletedCurrentCopy attributes for attributes that are
+        reset on each document copy.
+
+        NOTE - The jmJobImpressionsCompleted object can be used with
+        the jmJobImpressionsPerCopyRequested object to provide an
+        indication of the relative progress of the job, provided that
+        the multiplicative factor is taken into account for some
+        implementations of multiple copies.
+
+        See the definition of the term 'impression' in Section 2 and
+        the counting example in Section 3.4 entitled 'Monitoring Job
+        Progress'."
+    DEFVAL      { 0 }      -- default is no octets
+    ::= { jmJobEntry 8 }
+
+jmJobOwner OBJECT-TYPE
+    SYNTAX      JmJobStringTC (SIZE(0..63))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The coded character set name of the user that submitted the
+        job.  The method of assigning this user name will be system
+        and/or site specific but the method MUST ensure that the name
+        is unique to the network that is visible to the client and
+        target device.
+
+        This value SHOULD be the most authenticated name of the user
+        submitting the job.
+
+        See the OBJECT compliance macro for the minimum maximum length
+
+        required for conformance."
+    DEFVAL      { ''H }      -- default is empty string
+    ::= { jmJobEntry 9 }
+
+-- The Attribute Group (MANDATORY)
+
+-- The jmAttributeGroup consists entirely of the jmAttributeTable.
+--
+-- Implementation of the objects in this group is MANDATORY.
+-- See Section 3.1 entitled 'Conformance Considerations'.
+-- An agent SHALL implement any attribute if (1) the server or device
+-- supports the functionality represented by the attribute and (2) the
+-- information is available to the agent.
+
+jmAttribute  OBJECT IDENTIFIER ::= { jobmonMIBObjects 4 }
+
+jmAttributeTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF JmAttributeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The jmAttributeTable SHALL contain attributes of the job and
+        document(s) for each job in a job set.  Instead of allocating
+        distinct objects for each attribute, each attribute is
+        represented as a separate row in the jmAttributeTable.
+
+        The MANDATORY-GROUP macro specifies that this group is
+        MANDATORY.  An agent SHALL implement any attribute if (1) the
+        server or device supports the functionality represented by the
+        attribute and (2) the information is available to the agent. "
+    ::= { jmAttribute 1 }
+
+jmAttributeEntry  OBJECT-TYPE
+    SYNTAX      JmAttributeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Attributes representing information about the job and
+        document(s) or resources required and/or consumed.
+
+        Each entry in the jmAttributeTable is a per-job entry with an
+        extra index for each type of attribute (jmAttributeTypeIndex)
+        that a job can have and an additional index
+        (jmAttributeInstanceIndex) for those attributes that can have
+
+        multiple instances per job.  The jmAttributeTypeIndex object
+        SHALL contain an enum type that indicates the type of attribute
+        (see the JmAttributeTypeTC textual-convention).  The value of
+        the attribute SHALL be represented in either the
+        jmAttributeValueAsInteger or jmAttributeValueAsOctets objects,
+        and/or both, as specified in the JmAttributeTypeTC textual-
+        convention.
+
+        The agent SHALL create rows in the jmAttributeTable as the
+        server or device is able to discover the attributes either from
+        the job submission protocol itself or from the document PDL.
+        As the documents are interpreted, the interpreter MAY discover
+        additional attributes and so the agent adds additional rows to
+        this table.  As the attributes that represent resources are
+        actually consumed, the usage counter contained in the
+        jmAttributeValueAsInteger object is incremented according to
+        the units indicated in the description of the JmAttributeTypeTC
+        enum.
+
+        The agent SHALL maintain each row in the jmAttributeTable for
+        at least the minimum time after a job completes as specified by
+        the jmGeneralAttributePersistence object.
+
+        Zero or more entries SHALL exist in this table for each job in
+        a job set.
+
+        See Section 3.3 entitled 'The Attribute Mechanism' for a
+        description of the jmAttributeTable."
+    INDEX  { jmGeneralJobSetIndex, jmJobIndex, jmAttributeTypeIndex,
+    jmAttributeInstanceIndex }
+    ::= { jmAttributeTable 1 }
+
+JmAttributeEntry ::= SEQUENCE {
+    jmAttributeTypeIndex                  JmAttributeTypeTC,
+    jmAttributeInstanceIndex              Integer32 (1..32767),
+    jmAttributeValueAsInteger             Integer32 (-2..2147483647),
+    jmAttributeValueAsOctets              OCTET STRING(SIZE(0..63))
+}
+
+jmAttributeTypeIndex OBJECT-TYPE
+    SYNTAX      JmAttributeTypeTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The type of attribute that this row entry represents.
+
+        The type MAY identify information about the job or document(s)
+
+        or MAY identify a resource required to process the job before
+        the job start processing and/or consumed by the job as the job
+        is processed.
+
+        Examples of job attributes (i.e., apply to the job as a whole)
+        that have only one instance per job include:
+        jobCopiesRequested(90), documentCopiesRequested(92),
+        jobCopiesCompleted(91), documentCopiesCompleted(93), while
+        examples of job attributes that may have more than one instance
+        per job include:  documentFormatIndex(37), and
+        documentFormat(38).
+
+        Examples of document attributes (one instance per document)
+        include: fileName(34), and documentName(35).
+
+        Examples of required and consumed resource attributes include:
+        pagesRequested(130), mediumRequested(170), pagesCompleted(131),
+        and mediumConsumed(171), respectively."
+    ::= { jmAttributeEntry 1 }
+
+jmAttributeInstanceIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..32767)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A running 16-bit index of the attributes of the same type for
+        each job.  For those attributes with only a single instance per
+        job, this index value SHALL be 1.  For those attributes that
+        are a single value per document, the index value SHALL be the
+        document number, starting with 1 for the first document in the
+        job.  Jobs with only a single document SHALL use the index
+        value of 1.  For those attributes that can have multiple values
+        per job or per document, such as documentFormatIndex(37) or
+        documentFormat(38), the index SHALL be a running index for the
+        job as a whole, starting at 1."
+    ::= { jmAttributeEntry 2 }
+
+jmAttributeValueAsInteger OBJECT-TYPE
+    SYNTAX      Integer32 (-2..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The integer value of the attribute.  The value of the
+        attribute SHALL be represented as an integer if the enum
+
+        description in the JmAttributeTypeTC textual-convention
+        definition has the tag: 'INTEGER:'.
+
+        Depending on the enum definition, this object value MAY be an
+        integer, a counter, an index, or an enum, depending on the
+        jmAttributeTypeIndex value.  The units of this value are
+        specified in the enum description.
+
+        For those attributes that are accumulating job consumption as
+        the job is processed as specified in the JmAttributeTypeTC
+        textual-convention, SHALL contain the final value after the job
+        completes processing, i.e., this value SHALL indicate the total
+        usage of this resource made by the job.
+
+        A monitoring application is able to copy this value to a
+        suitable longer term storage for later processing as part of an
+        accounting system.
+
+        Since the agent MAY add attributes representing resources to
+        this table while the job is waiting to be processed or being
+        processed, which can be a long time before any of the resources
+        are actually used, the agent SHALL set the value of the
+        jmAttributeValueAsInteger object to 0 for resources that the
+        job has not yet consumed.
+
+        Attributes for which the concept of an integer value is
+        meaningless, such as fileName(34), jobName, and
+        processingMessage, do not have the 'INTEGER:' tag in the
+        JmAttributeTypeTC definition and so an agent SHALL always
+        return a value of '-1' to indicate 'other' for the value of the
+        jmAttributeValueAsInteger object for these attributes.
+
+        For attributes which do have the 'INTEGER:' tag in the
+        JmAttributeTypeTC definition, if the integer value is not (yet)
+        known, the agent either (1) SHALL not materialize the row in
+        the jmAttributeTable until the value is known or (2) SHALL
+        return a '-2' to represent an 'unknown' counting integer value,
+        a '0' to represent an 'unknown' index value, and a '2' to
+        represent an 'unknown(2)' enum value."
+    DEFVAL      { -2 }      -- default value is unknown(-2)
+    ::= { jmAttributeEntry 3 }
+
+jmAttributeValueAsOctets OBJECT-TYPE
+    SYNTAX      OCTET STRING(SIZE(0..63))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The octet string value of the attribute.  The value of the
+        attribute SHALL be represented as an OCTET STRING if the enum
+        description in the JmAttributeTypeTC textual-convention
+        definition has the tag: 'OCTETS:'.
+
+        Depending on the enum definition, this object value MAY be a
+        coded character set string (text), such as 'JmUTF8StringTC', or
+        a binary octet string, such as 'DateAndTime'.
+
+        Attributes for which the concept of an octet string value is
+        meaningless, such as pagesCompleted, do not have the tag
+        'OCTETS:' in the JmAttributeTypeTC definition and so the agent
+        SHALL always return a zero length string for the value of the
+        jmAttributeValueAsOctets object.
+
+        For attributes which do have the 'OCTETS:' tag in the
+        JmAttributeTypeTC definition, if the OCTET STRING value is not
+        (yet) known, the agent either SHALL NOT materialize the row in
+        the jmAttributeTable until the value is known or SHALL return a
+        zero-length string."
+    DEFVAL      { ''H }      -- empty string
+    ::= { jmAttributeEntry 4 }
+
+-- Notifications and Trapping
+-- Reserved for the future
+
+jobmonMIBNotifications  OBJECT IDENTIFIER  ::= { jobmonMIB 2 }
+
+-- Conformance Information
+
+jmMIBConformance OBJECT IDENTIFIER ::= { jobmonMIB 3 }
+
+-- compliance statements
+jmMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for agents that implement the
+        job monitoring MIB."
+    MODULE -- this module
+    MANDATORY-GROUPS {
+        jmGeneralGroup, jmJobIDGroup, jmJobGroup, jmAttributeGroup }
+
+    OBJECT   jmGeneralJobSetName
+    SYNTAX   JmUTF8StringTC (SIZE(0..8))
+    DESCRIPTION
+        "Only 8 octets maximum string length NEED be supported by the
+        agent."
+
+    OBJECT   jmJobOwner
+    SYNTAX   JmJobStringTC (SIZE(0..16))
+    DESCRIPTION
+        "Only 16 octets maximum string length NEED be supported by the
+        agent."
+
+-- There are no CONDITIONALLY MANDATORY or OPTIONAL groups.
+    ::= { jmMIBConformance 1 }
+
+jmMIBGroups      OBJECT IDENTIFIER ::= { jmMIBConformance 2 }
+
+jmGeneralGroup OBJECT-GROUP
+    OBJECTS {
+        jmGeneralNumberOfActiveJobs,   jmGeneralOldestActiveJobIndex,
+        jmGeneralNewestActiveJobIndex, jmGeneralJobPersistence,
+        jmGeneralAttributePersistence, jmGeneralJobSetName}
+    STATUS  current
+    DESCRIPTION
+        "The general group."
+    ::= { jmMIBGroups 1 }
+
+jmJobIDGroup OBJECT-GROUP
+    OBJECTS {
+        jmJobIDJobSetIndex, jmJobIDJobIndex }
+    STATUS  current
+    DESCRIPTION
+        "The job ID group."
+    ::= { jmMIBGroups 2 }
+
+jmJobGroup OBJECT-GROUP
+    OBJECTS {
+        jmJobState, jmJobStateReasons1, jmNumberOfInterveningJobs,
+        jmJobKOctetsPerCopyRequested, jmJobKOctetsProcessed,
+        jmJobImpressionsPerCopyRequested, jmJobImpressionsCompleted,
+        jmJobOwner }
+    STATUS  current
+    DESCRIPTION
+        "The job group."
+    ::= { jmMIBGroups 3 }
+
+jmAttributeGroup OBJECT-GROUP
+    OBJECTS {
+        jmAttributeValueAsInteger, jmAttributeValueAsOctets }
+    STATUS  current
+    DESCRIPTION
+        "The attribute group."
+    ::= { jmMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/L2TP-MIB.mib b/snmp_builder/mibs/L2TP-MIB.mib
new file mode 100644
index 0000000..a169762
--- /dev/null
+++ b/snmp_builder/mibs/L2TP-MIB.mib
@@ -0,0 +1,2664 @@
+L2TP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        Integer32, Unsigned32, Counter32, Gauge32,
+        Counter64, transmission, MODULE-IDENTITY,
+        OBJECT-TYPE, NOTIFICATION-TYPE
+            FROM SNMPv2-SMI
+        TEXTUAL-CONVENTION, RowStatus, TruthValue,
+        StorageType
+            FROM SNMPv2-TC
+        SnmpAdminString
+            FROM SNMP-FRAMEWORK-MIB
+        OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+            FROM SNMPv2-CONF
+        InterfaceIndex
+            FROM IF-MIB;
+
+l2tp    MODULE-IDENTITY
+        LAST-UPDATED    "200208230000Z" -- 23 August 2002
+        ORGANIZATION    "IETF L2TP Working Group"
+        CONTACT-INFO
+          "Evan Caves
+           Postal: Occam Networks
+                   77 Robin Hill Road
+                   Santa Barbara, CA, 93117
+           Tel:    +1 805692 2900
+           Email:  evan@occamnetworks.com
+
+           Pat R. Calhoun
+
+           Postal: Black Storm Networks
+                   110 Nortech Parkway
+                   San Jose, CA, 95143
+           Tel:    +1 408 941-0500
+           Email:  pcalhoun@bstormnetworks.com
+
+           Ross Wheeler
+           Postal: DoubleWide Software, Inc.
+                   2953 Bunker Hill Lane
+                   Suite 101
+                   Santa Clara, CA 95054
+           Tel:    +1 6509260599
+           Email:  ross@doublewidesoft.com
+
+           Layer Two Tunneling Protocol Extensions WG
+           Working Group Area:    Internet
+           Working Group Name:    l2tpext
+           General Discussion:    l2tp@l2tp.net"
+        DESCRIPTION
+           "The MIB module that describes managed objects of
+            general use by the Layer Two Transport Protocol."
+
+        -- revision log
+
+        REVISION        "200208230000Z" -- 23 August 2002
+        DESCRIPTION
+           "First revision, published as RFC 3371."
+        ::= { transmission 95 }
+
+--
+--      Textual Conventions
+--
+
+L2tpMilliSeconds ::=  TEXTUAL-CONVENTION
+        DISPLAY-HINT    "d-3"
+        STATUS          current
+        DESCRIPTION
+           "A period of time measured in units of .001 of seconds
+            when used in conjunction with the DISPLAY-HINT will
+            show seconds and fractions of second with a resolution
+            of .001 of a second."
+        SYNTAX          Integer32 (0..2147483646)
+
+--
+--      Definitions of significant branches
+--
+
+l2tpNotifications   OBJECT IDENTIFIER  ::= { l2tp 0 }
+l2tpObjects         OBJECT IDENTIFIER  ::= { l2tp 1 }
+l2tpTransports      OBJECT IDENTIFIER  ::= { l2tp 3 }
+l2tpConformance     OBJECT IDENTIFIER  ::= { l2tp 4 }
+
+--
+--      Definitions of significant branches under l2tpObjects
+--
+l2tpScalar          OBJECT IDENTIFIER  ::= { l2tpObjects 1 }
+l2tpConfig          OBJECT IDENTIFIER  ::= { l2tpScalar 1 }
+l2tpStats           OBJECT IDENTIFIER  ::= { l2tpScalar 2 }
+
+--
+--      Definitions of significant branches under l2tpTransports
+--
+--      Note that future transports of L2TP (e.g.: Frame relay)
+--      should create their own branch under l2tpTransports.
+
+l2tpTransportIpUdp  OBJECT IDENTIFIER  ::= { l2tpTransports 1 }
+l2tpIpUdpObjects    OBJECT IDENTIFIER  ::= { l2tpTransportIpUdp 1 }
+l2tpIpUdpTraps      OBJECT IDENTIFIER  ::= { l2tpTransportIpUdp 2 }
+
+--
+--      The L2TP Scalar Configuration Group
+--
+--      This group of objects is used to manage configuration
+--      of the L2TP protocol environment.
+
+l2tpAdminState          OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            enabled(1),
+                            disabled(2)
+                        }
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the administrative state of
+            the L2TP protocol. Setting this object to
+            'disabled' causes all tunnels to be immediately
+            disconnected and no further tunnels to be either
+            initiated or accepted. The value of this object
+            must be maintained in non-volatile memory."
+        ::= { l2tpConfig 1 }
+
+l2tpDrainTunnels        OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "Setting this object to 'true' will prevent any new
+            tunnels and/or sessions to be either initiated or
+            accepted but does NOT disconnect any active
+            tunnels/sessions. Setting this object to true(1)
+            causes all domains and their respective tunnels
+            to transition to the draining state. Note that
+            when this occurs the 'xxxDraining' status objects
+            of the domains and their tunnels should reflect
+            that they are 'draining'. Setting this object has
+            no affect on the domains or their tunnels
+            'xxxDrainTunnels' configuration objects. To cancel
+            a drain this object should be set to false(2).
+            The object l2tpDrainingTunnels reflects
+            the current L2TP draining state. The value of
+            this object must be maintained in non-volatile
+            memory."
+        ::= { l2tpConfig 2 }
+
+--
+--      The L2TP Scalar Status and Statistics Group
+--
+--      This group of objects describe the current state and
+--      statistics of L2TP.
+
+l2tpProtocolVersions    OBJECT-TYPE
+        SYNTAX          OCTET STRING (SIZE(2..256))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+            "Vector of supported L2TP protocol version and
+             revision numbers. Supported versions are identified
+             via a two octet pairing where the first octet indicates
+             the version and the second octet contains the revision."
+        ::= { l2tpStats 1 }
+
+l2tpVendorName          OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the Vendor name of the L2TP
+            protocol stack."
+        ::= { l2tpStats 2 }
+
+l2tpFirmwareRev         OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object defines the firmware revision for the
+            L2TP protocol stack."
+        ::= { l2tpStats 3 }
+
+l2tpDrainingTunnels     OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object indicates if the local L2TP is draining
+            off sessions from all tunnels."
+        ::= { l2tpStats 4 }
+
+--
+--      The L2TP Domain Configuration Table
+--
+
+l2tpDomainConfigTable   OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpDomainConfigEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP Domain configuration table. This table
+            contains objects that can be used to configure
+            the operational characteristics of a tunnel
+            domain. There is a 1-1 correspondence between
+            conceptual rows of this table and conceptual
+            rows of the l2tpDomainStatsTable."
+        ::= { l2tpObjects 2 }
+
+l2tpDomainConfigEntry   OBJECT-TYPE
+        SYNTAX          L2tpDomainConfigEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP Domain configuration entry. An entry in this
+            table may correspond to a single endpoint or a group
+            of tunnel endpoints."
+        INDEX { l2tpDomainConfigId }
+        ::= { l2tpDomainConfigTable 1 }
+
+L2tpDomainConfigEntry ::=
+        SEQUENCE {
+            l2tpDomainConfigId
+                SnmpAdminString,
+            l2tpDomainConfigAdminState
+
+                INTEGER,
+            l2tpDomainConfigDrainTunnels
+                TruthValue,
+            l2tpDomainConfigAuth
+                INTEGER,
+            l2tpDomainConfigSecret
+                SnmpAdminString,
+            l2tpDomainConfigTunnelSecurity
+                INTEGER,
+            l2tpDomainConfigTunnelHelloInt
+                Integer32,
+            l2tpDomainConfigTunnelIdleTO
+                Integer32,
+            l2tpDomainConfigControlRWS
+                Integer32,
+            l2tpDomainConfigControlMaxRetx
+                Integer32,
+            l2tpDomainConfigControlMaxRetxTO
+                Integer32,
+            l2tpDomainConfigPayloadSeq
+                INTEGER,
+            l2tpDomainConfigReassemblyTO
+                L2tpMilliSeconds,
+            l2tpDomainConfigProxyPPPAuth
+                TruthValue,
+            l2tpDomainConfigStorageType
+                StorageType,
+            l2tpDomainConfigStatus
+                RowStatus
+        }
+
+l2tpDomainConfigId OBJECT-TYPE
+        SYNTAX          SnmpAdminString (SIZE (1..80))
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The identifier, usually in the form of a Domain
+            Name (full or partial), describing a single tunnel
+            endpoint or a domain of tunnel endpoints. This is
+            typically used as a 'handle' to identify the
+            tunnel configuration requirements for both incoming
+            and outgoing tunnel connection attempts. Both the
+            LAC and  LNS could use information provided in the
+            Host Name AVP attribute however the tunnel initiator
+            could use other means not specified to identify
+            the domain's tunnel configuration requirements.
+            For example; three rows in this table have
+            l2tpDomainConfigId values of 'lac1.isp.com',
+            'isp.com' and 'com'. A tunnel endpoint then identifies
+            itself as 'lac1.isp.com' which would match the
+            'lac1.isp.com' entry in this table. A second tunnel
+            endpoint then identifies itself as 'lac2.isp.com'.
+            This endpoint is then associated with the 'isp.com'
+            entry of this table."
+        ::= { l2tpDomainConfigEntry 1 }
+
+l2tpDomainConfigAdminState OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            enabled(1),
+                            disabled(2)
+                        }
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the administrative state of this
+            tunnel domain. Setting this object to disabled(2)
+            causes all tunnels to be immediately disconnected
+            and no further tunnels to be either initiated or
+            accepted. Note that all columnar objects corresponding
+            to this conceptual row cannot be modified when
+            the administrative state is enabled EXCEPT those
+            objects which specifically state otherwise."
+        DEFVAL { enabled }
+        ::= { l2tpDomainConfigEntry 2 }
+
+l2tpDomainConfigDrainTunnels OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "Setting this object to 'true' will prevent any new
+            tunnels and/or sessions from being either initiated
+            or accepted but does NOT disconnect any active
+            tunnels/sessions for this tunnel domain. Setting
+            this object to true(1) causes all tunnels within
+            this domain to transition to the draining state.
+            Note that when this occurs the
+            l2tpTunnelStatsDrainingTunnel status objects of
+            all of this domain's tunnels should reflect that
+            they are 'draining'. Setting this object has no
+            effect on this domain's associated tunnels
+            l2tpTunnelConfigDrainTunnel configuration objects.
+            To cancel a drain this object should be set to
+            false(2).  Setting this object to false(2) when
+            the L2TP object l2tpDrainTunnels is true(1) has
+            no affect, all domains and their tunnels will
+
+            continue to drain."
+        DEFVAL { false }
+        ::= { l2tpDomainConfigEntry 3 }
+
+l2tpDomainConfigAuth OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            simple(2),
+                            challenge(3)
+                        }
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object describes how tunnel peers belonging
+            to this domain are to be authenticated. The value
+            simple(2) indicates that peers are authenticated
+            simply by their host name as described in the Host
+            Name AVP.  The value challenge(3) indicates that
+            all peers are challenged to prove their identification.
+            This mechanism is described in the L2TP protocol."
+        REFERENCE "RFC 2661 Section 5.1"
+        DEFVAL { none }
+        ::= { l2tpDomainConfigEntry 4 }
+
+l2tpDomainConfigSecret  OBJECT-TYPE
+        SYNTAX          SnmpAdminString (SIZE (0..255))
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object is used to configure the shared secret
+            used during the tunnel authentication phase of
+            tunnel establishment. This object MUST be accessible
+            only via requests using both authentication and
+            privacy. The agent MUST report an empty string in
+            response to get, get-next and get-bulk requests."
+        ::= { l2tpDomainConfigEntry 5 }
+
+l2tpDomainConfigTunnelSecurity OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            other(2),
+                            ipSec(3)
+                        }
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines whether this tunnel domain
+            requires that all tunnels are to be secured. The
+
+            value of ipsec(3) indicates that all tunnel packets,
+            control and session, have IP Security headers. The
+            type of IP Security headers (AH, ESP etc) and how
+            they are further described is outside the scope of
+            this document."
+        DEFVAL { none }
+        ::= { l2tpDomainConfigEntry 6 }
+
+l2tpDomainConfigTunnelHelloInt OBJECT-TYPE
+        SYNTAX          Integer32 (0..3600)
+        UNITS           "seconds"
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the interval in which Hello
+            (or keep-alive) packets are to be sent by local
+            peers belonging to this tunnel domain. The value
+            zero effectively disables the sending of Hello
+            packets. This object may be modified when the
+            administrative state is enabled for this conceptual
+            row."
+        DEFVAL { 60 }
+        ::= { l2tpDomainConfigEntry 7 }
+
+l2tpDomainConfigTunnelIdleTO OBJECT-TYPE
+        SYNTAX          Integer32 (-1..86400)
+        UNITS           "seconds"
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the period of time that an
+            established tunnel belonging to this tunnel
+            domain with no active sessions will wait before
+            disconnecting the tunnel. A value of zero indicates
+            that the tunnel will disconnect immediately after the
+            last session disconnects. A value of -1 leaves the
+            tunnel up indefinitely. This object may be modified
+            when the administrative state is enabled for this
+            conceptual row."
+        DEFVAL { 0 }
+        ::= { l2tpDomainConfigEntry 8 }
+
+l2tpDomainConfigControlRWS OBJECT-TYPE
+        SYNTAX          Integer32 (1..65535)
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the control channel receive
+
+            window size for tunnels belonging to this domain. It
+            specifies the maximum number of packets the tunnel
+            peer belonging to this domain can send without waiting
+            for an acknowledgement from this peer."
+        DEFVAL { 4 }
+        ::= { l2tpDomainConfigEntry 9 }
+
+l2tpDomainConfigControlMaxRetx OBJECT-TYPE
+        SYNTAX          Integer32 (0..32)
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the maximum number of retransmissions
+            which the L2TP stack will attempt for tunnels belonging
+            to this domain before assuming that the peer is no
+            longer responding."
+        DEFVAL { 5 }
+        ::= { l2tpDomainConfigEntry 10 }
+
+l2tpDomainConfigControlMaxRetxTO OBJECT-TYPE
+        SYNTAX          Integer32 (1..32)
+        UNITS           "seconds"
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the maximum retransmission timeout
+            interval which the L2TP stack will wait for tunnels
+            belonging to this domain before retransmitting a
+            control packet that has not been acknowledged."
+        DEFVAL { 16 }
+        ::= { l2tpDomainConfigEntry 11 }
+
+l2tpDomainConfigPayloadSeq OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            onDemand(1),
+                            never(2),
+                            always(3)
+                        }
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object determines whether or not session payload
+            packets will be requested to be sent with sequence
+            numbers from tunnel peers belonging to this domain.
+            The value onDemand(1) allows the L2TP implementation
+            to initiate payload sequencing when necessary based
+            on local information (e.g: during LCP/NCP negotiations
+            or for CCP). The value never(2) indicates that L2TP
+
+            will never initiate sequencing but will do sequencing
+            if asked. The value always(3) indicates that L2TP
+            will send the Sequencing Required AVP during session
+            establishment."
+        DEFVAL { onDemand }
+        ::= { l2tpDomainConfigEntry 12 }
+
+l2tpDomainConfigReassemblyTO OBJECT-TYPE
+        SYNTAX          L2tpMilliSeconds
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object defines the number of milliseconds that
+            local peers of this tunnel domain will wait before
+            processing payload packets that were received out of
+            sequence (which are waiting for the packet(s) to put
+            them in sequence).  A low value increases the chance
+            of delayed packets to be discarded (which MAY cause
+            the PPP decompression engine to reset) while a high
+            value may cause more queuing and possibly degrade
+            throughput if packets are truly lost. The default
+            value for this object is zero which will result in
+            all delayed packets being lost."
+        DEFVAL { 0 }
+        ::= { l2tpDomainConfigEntry 13 }
+
+l2tpDomainConfigProxyPPPAuth OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object is used to configure the sending
+            or acceptance of the PPP Proxy Authentication
+            AVP's on the LAC or LNS."
+        DEFVAL { true }
+        ::= { l2tpDomainConfigEntry 14 }
+
+l2tpDomainConfigStorageType  OBJECT-TYPE
+        SYNTAX          StorageType
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "The storage type for this conceptual row.
+
+            Conceptual rows having the value 'permanent' must
+            allow write-access at a minimum to:
+
+            - l2tpDomainConfigAdminState and
+
+              l2tpDomainConfigDrainTunnels at all times
+            - l2tpDomainConfigSecret if l2tpDomainConfigAuth
+              has been configured as 'challenge'
+
+            It is an implementation issue to decide if a SET for
+            a readOnly or permanent row is accepted at all. In some
+            contexts this may make sense, in others it may not. If
+            a SET for a readOnly or permanent row is not accepted
+            at all, then a 'wrongValue' error must be returned."
+        ::= { l2tpDomainConfigEntry 15 }
+
+l2tpDomainConfigStatus  OBJECT-TYPE
+        SYNTAX          RowStatus
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "The status of this Domain entry. Columnar objects
+            corresponding to this conceptual row may be modified
+            according to their description clauses when this
+            RowStatus object is 'active'."
+        ::= { l2tpDomainConfigEntry 16 }
+
+--
+--      The L2TP Domain Status and Statistics Table
+--
+
+l2tpDomainStatsTable    OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpDomainStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP Domain Status and Statistics table. This
+            table contains objects that can be used to describe
+            the current status and statistics of a tunnel domain.
+            There is a 1-1 correspondence between conceptual
+            rows of this table and conceptual rows of the
+            l2tpDomainConfigTable."
+        ::= { l2tpObjects 3 }
+
+l2tpDomainStatsEntry    OBJECT-TYPE
+        SYNTAX          L2tpDomainStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP Domain Stats entry. An entry in this table
+            may correspond to a single endpoint or a group of
+            tunnel endpoints."
+        AUGMENTS { l2tpDomainConfigEntry }
+        ::= { l2tpDomainStatsTable 1 }
+
+L2tpDomainStatsEntry ::=
+        SEQUENCE {
+            l2tpDomainStatsTotalTunnels
+                Counter32,
+            l2tpDomainStatsFailedTunnels
+                Counter32,
+            l2tpDomainStatsFailedAuths
+                Counter32,
+            l2tpDomainStatsActiveTunnels
+                Gauge32,
+            l2tpDomainStatsTotalSessions
+                Counter32,
+            l2tpDomainStatsFailedSessions
+                Counter32,
+            l2tpDomainStatsActiveSessions
+                Gauge32,
+            l2tpDomainStatsDrainingTunnels
+                TruthValue,
+            l2tpDomainStatsControlRxOctets
+                Counter32,
+            l2tpDomainStatsControlRxPkts
+                Counter32,
+            l2tpDomainStatsControlTxOctets
+                Counter32,
+            l2tpDomainStatsControlTxPkts
+                Counter32,
+            l2tpDomainStatsPayloadRxOctets
+                Counter32,
+            l2tpDomainStatsPayloadRxPkts
+                Counter32,
+            l2tpDomainStatsPayloadRxDiscs
+                Counter32,
+            l2tpDomainStatsPayloadTxOctets
+                Counter32,
+            l2tpDomainStatsPayloadTxPkts
+                Counter32,
+            l2tpDomainStatsControlHCRxOctets
+                Counter64,
+            l2tpDomainStatsControlHCRxPkts
+                Counter64,
+            l2tpDomainStatsControlHCTxOctets
+                Counter64,
+            l2tpDomainStatsControlHCTxPkts
+                Counter64,
+            l2tpDomainStatsPayloadHCRxOctets
+                Counter64,
+            l2tpDomainStatsPayloadHCRxPkts
+                Counter64,
+            l2tpDomainStatsPayloadHCRxDiscs
+                Counter64,
+            l2tpDomainStatsPayloadHCTxOctets
+                Counter64,
+            l2tpDomainStatsPayloadHCTxPkts
+                Counter64
+        }
+
+l2tpDomainStatsTotalTunnels OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the total number of tunnels
+            that have successfully reached the established
+            state for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 1 }
+
+l2tpDomainStatsFailedTunnels OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of tunnels that
+            failed (eg: connection timeout, unsupported
+            or malformed AVP's etc) to reach the established
+            state for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 2 }
+
+l2tpDomainStatsFailedAuths OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of failed tunnel
+            connection attempts for this domain because the
+            tunnel peer failed authentication."
+        ::= { l2tpDomainStatsEntry 3 }
+
+l2tpDomainStatsActiveTunnels OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of tunnels that
+            are currently active for this domain."
+        ::= { l2tpDomainStatsEntry 4 }
+
+l2tpDomainStatsTotalSessions OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the total number of sessions
+            that have successfully reached the established
+            state for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 5 }
+
+l2tpDomainStatsFailedSessions OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of sessions that
+            failed (eg: connection timeout, unsupported
+            or malformed AVP's etc) to reach the established
+            state for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 6 }
+
+l2tpDomainStatsActiveSessions OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of sessions that
+            are currently active for this domain."
+        ::= { l2tpDomainStatsEntry 7 }
+
+l2tpDomainStatsDrainingTunnels OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object indicates if this domain is draining
+            off sessions from all tunnels."
+        ::= { l2tpDomainStatsEntry 8 }
+
+l2tpDomainStatsControlRxOctets OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of control channel
+            octets received for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 9 }
+
+l2tpDomainStatsControlRxPkts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of control packets
+            received for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 10 }
+
+l2tpDomainStatsControlTxOctets OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of control channel
+            octets that were transmitted to tunnel endpoints
+            for this domain."
+        ::= { l2tpDomainStatsEntry 11 }
+
+l2tpDomainStatsControlTxPkts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of control packets
+            that were transmitted to tunnel endpoints for
+            this domain."
+        ::= { l2tpDomainStatsEntry 12 }
+
+l2tpDomainStatsPayloadRxOctets OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of payload channel
+            octets that were received for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 13 }
+
+l2tpDomainStatsPayloadRxPkts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of payload packets
+            that were received for this tunnel domain."
+        ::= { l2tpDomainStatsEntry 14 }
+
+l2tpDomainStatsPayloadRxDiscs OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of received payload
+            packets that were discarded by this tunnel domain."
+        ::= { l2tpDomainStatsEntry 15 }
+
+l2tpDomainStatsPayloadTxOctets OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of payload channel
+            octets that were transmitted to tunnel peers
+            within this tunnel domain."
+        ::= { l2tpDomainStatsEntry 16 }
+
+l2tpDomainStatsPayloadTxPkts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of payload packets
+            that were transmitted to tunnel peers within
+            this tunnel domain."
+        ::= { l2tpDomainStatsEntry 17 }
+
+--
+-- High Capacity Counter objects.  These objects are all
+-- 64 bit versions of the above 32-bit counters.  These
+-- objects all have the same basic semantics as their
+-- 32-bit counterparts, however, their syntax has been
+-- extended to 64 bits.
+--
+
+l2tpDomainStatsControlHCRxOctets OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsControlRxOctets."
+        ::= { l2tpDomainStatsEntry 18 }
+
+l2tpDomainStatsControlHCRxPkts OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsControlRxPkts."
+        ::= { l2tpDomainStatsEntry 19 }
+
+l2tpDomainStatsControlHCTxOctets OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsControlTxOctets."
+        ::= { l2tpDomainStatsEntry 20 }
+
+l2tpDomainStatsControlHCTxPkts OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsControlTxPkts."
+        ::= { l2tpDomainStatsEntry 21 }
+
+l2tpDomainStatsPayloadHCRxOctets OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsPayloadRxOctets."
+        ::= { l2tpDomainStatsEntry 22 }
+
+l2tpDomainStatsPayloadHCRxPkts OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsPayloadRxPkts."
+        ::= { l2tpDomainStatsEntry 23 }
+
+l2tpDomainStatsPayloadHCRxDiscs OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsPayloadRxDiscs."
+        ::= { l2tpDomainStatsEntry 24 }
+
+l2tpDomainStatsPayloadHCTxOctets OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsPayloadTxOctets."
+        ::= { l2tpDomainStatsEntry 25 }
+
+l2tpDomainStatsPayloadHCTxPkts OBJECT-TYPE
+        SYNTAX          Counter64
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object is a 64-bit version of
+            l2tpDomainStatsPayloadTxPkts."
+        ::= { l2tpDomainStatsEntry 26 }
+
+--
+--      The L2TP Tunnel Configuration Table
+--
+
+l2tpTunnelConfigTable   OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpTunnelConfigEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP tunnel configuration table. This
+            table contains objects that can be used to
+            (re)configure the operational characteristics
+            of a single L2TP tunnel. There is a 1-1
+            correspondence between conceptual rows of
+            this table and conceptual rows of the
+            l2tpTunnelStatsTable. Entries in this table
+            have the same persistency characteristics as
+            that of the tunnelConfigTable."
+        REFERENCE "RFC 2667"
+        ::= { l2tpObjects 4 }
+
+l2tpTunnelConfigEntry   OBJECT-TYPE
+        SYNTAX          L2tpTunnelConfigEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "A L2TP tunnel interface configuration entry.
+            Entries in this table come and go as a result
+            of protocol interactions or on management
+            operations. The latter occurs when a row is
+            instantiated in the tunnelConfigTable row
+            and the encapsulation method is 'l2tp'."
+        REFERENCE "RFC 2667"
+        INDEX { l2tpTunnelConfigIfIndex }
+        ::= { l2tpTunnelConfigTable 1 }
+
+L2tpTunnelConfigEntry ::=
+        SEQUENCE {
+            l2tpTunnelConfigIfIndex
+                InterfaceIndex,
+            l2tpTunnelConfigDomainId
+                SnmpAdminString,
+            l2tpTunnelConfigAuth
+                INTEGER,
+            l2tpTunnelConfigSecret
+                SnmpAdminString,
+            l2tpTunnelConfigSecurity
+                INTEGER,
+            l2tpTunnelConfigHelloInterval
+                Integer32,
+            l2tpTunnelConfigIdleTimeout
+                Integer32,
+            l2tpTunnelConfigControlRWS
+                Integer32,
+            l2tpTunnelConfigControlMaxRetx
+                Integer32,
+            l2tpTunnelConfigControlMaxRetxTO
+                Integer32,
+            l2tpTunnelConfigPayloadSeq
+                INTEGER,
+            l2tpTunnelConfigReassemblyTO
+                L2tpMilliSeconds,
+            l2tpTunnelConfigTransport
+                INTEGER,
+            l2tpTunnelConfigDrainTunnel
+                TruthValue,
+            l2tpTunnelConfigProxyPPPAuth
+                TruthValue
+        }
+
+l2tpTunnelConfigIfIndex OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This value for this object is equal to the value
+            of ifIndex of the Interfaces MIB for tunnel
+            interfaces of type L2TP."
+        ::= { l2tpTunnelConfigEntry 1 }
+
+l2tpTunnelConfigDomainId OBJECT-TYPE
+        SYNTAX          SnmpAdminString (SIZE (1..80))
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "The tunnel domain that this tunnel belongs
+            to. A LNS tunnel endpoint will typically inherit
+            this value from the endpoint domain table. A
+            LAC may be provided with this information during
+            tunnel setup. When a zero length string is returned
+            this tunnel does not belong belong to any particular
+            domain."
+        ::= { l2tpTunnelConfigEntry 2 }
+
+l2tpTunnelConfigAuth OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            simple(2),
+                            challenge(3)
+                        }
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object describes how L2TP tunnel peers are
+            to be authenticated. The value 'simple' indicates
+            that peers are authenticated simply by their host
+            name as described in the Host Name AVP. The value
+            'challenge' indicates that all peers are challenged
+            to prove their identification. This mechanism is
+            described in the L2TP protocol. This object cannot
+            be modified when the tunnel is in a connecting or
+            connected state."
+        DEFVAL { none }
+        ::= { l2tpTunnelConfigEntry 3 }
+
+l2tpTunnelConfigSecret  OBJECT-TYPE
+        SYNTAX          SnmpAdminString (SIZE (0..255))
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object is used to configure the shared secret
+            used during the tunnel authentication phase of
+
+            tunnel establishment. This object cannot be modified
+            when the tunnel is in a connecting or connected
+            state. This object MUST be accessible only via
+            requests using both authentication and privacy.
+            The agent MUST report an empty string in response
+            to get, get-next and get-bulk requests."
+        ::= { l2tpTunnelConfigEntry 4 }
+
+l2tpTunnelConfigSecurity OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            other(2),
+                            ipsec(3)
+                        }
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines whether this tunnel is to be
+            secured. The value of 'ipSec' indicates that all
+            tunnel packets, control and session, have IP
+            Security headers. The type of IP Security headers
+            (AH, ESP etc) and how they are further described
+            is outside the scope of this document. This object
+            cannot be modified when the tunnel is in a connecting
+            or connected state."
+        DEFVAL { none }
+        ::= { l2tpTunnelConfigEntry 5 }
+
+l2tpTunnelConfigHelloInterval OBJECT-TYPE
+        SYNTAX          Integer32  (0..3600)
+        UNITS           "seconds"
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the interval in which Hello
+            (or keep-alive) packets are to be sent to the
+            tunnel peer.  The value zero effectively disables
+            the sending of Hello packets. Modifications to this
+            object have immediate effect."
+        DEFVAL { 60 }
+        ::= { l2tpTunnelConfigEntry 6 }
+
+l2tpTunnelConfigIdleTimeout OBJECT-TYPE
+        SYNTAX          Integer32 (-1..86400)
+        UNITS           "seconds"
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the period of time that an
+            established tunnel with no sessions will wait
+            before disconnecting the tunnel. A value of
+            zero indicates that the tunnel will disconnect
+            immediately after the last session disconnects.
+            A value of -1 leaves the tunnel up indefinitely.
+            Modifications to this object have immediate
+            effect."
+        DEFVAL { 0 }
+        ::= { l2tpTunnelConfigEntry 7 }
+
+l2tpTunnelConfigControlRWS OBJECT-TYPE
+        SYNTAX          Integer32 (1..65535)
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the control channel receive
+            window size. It specifies the maximum number of
+            packets the tunnel peer can send without waiting
+            for an acknowledgement from this peer. This object
+            cannot be modified when the tunnel is in a con-
+            necting or connected state."
+        DEFVAL { 4 }
+        ::= { l2tpTunnelConfigEntry 8 }
+
+l2tpTunnelConfigControlMaxRetx OBJECT-TYPE
+        SYNTAX          Integer32 (0..32)
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the number of retransmissions
+            which the tunnel will attempt before assuming that
+            the peer is no longer responding. A value of zero
+            indicates that this peer will not attempt to
+            retransmit an unacknowledged control packet.
+            Modifications to this object have immediate
+            effect."
+        DEFVAL { 5 }
+        ::= { l2tpTunnelConfigEntry 9 }
+
+l2tpTunnelConfigControlMaxRetxTO OBJECT-TYPE
+        SYNTAX          Integer32 (1..32)
+        UNITS           "seconds"
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the maximum retransmission timeout
+            interval which the tunnel will wait before retrans-
+
+            mitting a control packet that has not been acknowledged.
+            Modifications to this object have immediate effect."
+        DEFVAL { 16 }
+        ::= { l2tpTunnelConfigEntry 10 }
+
+l2tpTunnelConfigPayloadSeq OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            onDemand(1),
+                            never(2),
+                            always(3)
+                        }
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object determines whether or not session payload
+            packets will be requested to be sent with sequence
+            numbers from tunnel peers belonging to this domain.
+            The value onDemand(1) allows the L2TP implementation
+            to initiate payload sequencing when necessary based
+            on local information (e.g: during LCP/NCP negotiations
+            or for CCP). The value never(2) indicates that L2TP
+            will never initiate sequencing but will do sequencing
+            if asked. The value always(3) indicates that L2TP
+            will send the Sequencing Required AVP during session
+            establishment. Modifications to this object have
+            immediate effect."
+        DEFVAL { onDemand }
+        ::= { l2tpTunnelConfigEntry 11 }
+
+l2tpTunnelConfigReassemblyTO OBJECT-TYPE
+        SYNTAX          L2tpMilliSeconds
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the number of milliseconds that
+            this tunnel will wait before processing payload packets
+            that were received out of sequence (which are waiting
+            for the packet(s) to put them in sequence).  A low value
+            increases the chance of delayed packets to be discarded
+            (which MAY cause the PPP decompression engine to
+            reset) while a high value may cause more queuing and
+            possibly degrade throughput if packets are truly lost.
+            The default value for this object is zero which will
+            result in all delayed packets being lost. Modifications
+            to this object have immediate effect."
+        DEFVAL { 0 }
+        ::= { l2tpTunnelConfigEntry 12 }
+
+l2tpTunnelConfigTransport OBJECT-TYPE
+        SYNTAX          INTEGER {
+                           other(1),
+                           none(2),
+                           udpIp(3),
+                           frameRelay(4),
+                           atm(5)
+                        }
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object defines the underlying transport media
+            that is in use for this tunnel entry. Different tunnel
+            transports may define MIB extensions to the L2TP tunnel
+            table to realize the transport layer. For example if the
+            value of this object is 'udpIp' then the value of ifIndex
+            for this table may be used to determine state from the
+            l2tpUdpStatsTable. This object cannot be modified when
+            the tunnel is in a connecting or connected state."
+        ::= { l2tpTunnelConfigEntry 13 }
+
+l2tpTunnelConfigDrainTunnel OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "Setting this object to 'true' will prevent any new
+            session from being either initiated or accepted but
+            does NOT disconnect any active sessions for this
+            tunnel. Note that when this occurs the
+            l2tpTunnelStatsDrainingTunnel status object of
+            this tunnel should reflect that it is 'draining'.
+            To cancel a drain this object should be set to
+            false(2).  Setting this object to false(2) when
+            the L2TP objects l2tpDrainTunnels or
+            l2tpDomainConfigDrainTunnels is true(1) has
+            no affect, this tunnels will continue to drain."
+        DEFVAL { false }
+        ::= { l2tpTunnelConfigEntry 14 }
+
+l2tpTunnelConfigProxyPPPAuth OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-write
+        STATUS          current
+        DESCRIPTION
+           "This object is used to configure the sending
+            or acceptance of the session PPP Proxy
+            Authentication AVP's on the LAC or LNS."
+        DEFVAL { true }
+        ::= { l2tpTunnelConfigEntry 15 }
+
+--
+--      The L2TP Tunnel Status and Statisticss Table
+--
+
+l2tpTunnelStatsTable    OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpTunnelStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP tunnel status and statistics table. This
+            table contains objects that can be used to describe
+            the current status and statistics of a single L2TP
+            tunnel. There is a 1-1 correspondence between
+            conceptual rows of this table and conceptual rows of
+            the l2tpTunnelConfigTable."
+        ::= { l2tpObjects 5 }
+
+l2tpTunnelStatsEntry    OBJECT-TYPE
+        SYNTAX          L2tpTunnelStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP tunnel interface stats entry."
+        AUGMENTS { l2tpTunnelConfigEntry }
+        ::= { l2tpTunnelStatsTable 1 }
+
+L2tpTunnelStatsEntry ::=
+        SEQUENCE {
+            l2tpTunnelStatsLocalTID
+                Integer32,
+            l2tpTunnelStatsRemoteTID
+                Integer32,
+            l2tpTunnelStatsState
+                INTEGER,
+            l2tpTunnelStatsInitiated
+                INTEGER,
+            l2tpTunnelStatsRemoteHostName
+                SnmpAdminString,
+            l2tpTunnelStatsRemoteVendorName
+                SnmpAdminString,
+            l2tpTunnelStatsRemoteFirmwareRev
+                Integer32,
+            l2tpTunnelStatsRemoteProtocolVer
+                OCTET STRING,
+            l2tpTunnelStatsInitialRemoteRWS
+                Integer32,
+            l2tpTunnelStatsBearerCaps
+                INTEGER,
+            l2tpTunnelStatsFramingCaps
+                INTEGER,
+            l2tpTunnelStatsControlRxPkts
+                Counter32,
+            l2tpTunnelStatsControlRxZLB
+                Counter32,
+            l2tpTunnelStatsControlOutOfSeq
+                Counter32,
+            l2tpTunnelStatsControlOutOfWin
+                Counter32,
+            l2tpTunnelStatsControlTxPkts
+                Counter32,
+            l2tpTunnelStatsControlTxZLB
+                Counter32,
+            l2tpTunnelStatsControlAckTO
+                Counter32,
+            l2tpTunnelStatsCurrentRemoteRWS
+                Gauge32,
+            l2tpTunnelStatsTxSeq
+                Integer32,
+            l2tpTunnelStatsTxSeqAck
+                Integer32,
+            l2tpTunnelStatsRxSeq
+                Integer32,
+            l2tpTunnelStatsRxSeqAck
+                Integer32,
+            l2tpTunnelStatsTotalSessions
+                Counter32,
+            l2tpTunnelStatsFailedSessions
+                Counter32,
+            l2tpTunnelStatsActiveSessions
+                Gauge32,
+            l2tpTunnelStatsLastResultCode
+                Integer32,
+            l2tpTunnelStatsLastErrorCode
+                Integer32,
+            l2tpTunnelStatsLastErrorMessage
+                SnmpAdminString,
+            l2tpTunnelStatsDrainingTunnel
+                TruthValue
+        }
+
+l2tpTunnelStatsLocalTID OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the local tunnel Identifier."
+        REFERENCE "RFC 2661, Section 3.1"
+        ::= { l2tpTunnelStatsEntry 1 }
+
+l2tpTunnelStatsRemoteTID OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the remote tunnel Identifier."
+        REFERENCE "RFC 2661, Section 3.1"
+        ::= { l2tpTunnelStatsEntry 2 }
+
+l2tpTunnelStatsState    OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            tunnelIdle(1),
+                            tunnelConnecting(2),
+                            tunnelEstablished(3),
+                            tunnelDisconnecting(4)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This field contains the current state of the
+            control tunnel."
+        ::= { l2tpTunnelStatsEntry 3 }
+
+l2tpTunnelStatsInitiated OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            locally(1),
+                            remotely(2)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object indicates whether the tunnel was
+            initiated locally or by the remote tunnel peer."
+        ::= { l2tpTunnelStatsEntry 4 }
+
+l2tpTunnelStatsRemoteHostName OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the host name as discovered
+
+            during the tunnel establishment phase (via the Host
+            Name AVP) of the L2TP peer. If the tunnel is idle
+            this object should maintain its value from the last
+            time it was connected."
+        ::= { l2tpTunnelStatsEntry 5 }
+
+l2tpTunnelStatsRemoteVendorName OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the vendor name of the peer's
+            L2TP implementation. If the tunnel is idle this
+            object should maintain its value from the last time
+            it was connected."
+        ::= { l2tpTunnelStatsEntry 6 }
+
+l2tpTunnelStatsRemoteFirmwareRev OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the tunnel peer's firmware
+            revision number. If the tunnel is idle this object
+            should maintain its value from the last time it
+            was connected."
+        ::= { l2tpTunnelStatsEntry 7 }
+
+l2tpTunnelStatsRemoteProtocolVer OBJECT-TYPE
+        SYNTAX          OCTET STRING (SIZE(2))
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object describes the protocol version and
+            revision of the tunnel peers implementation. The
+            first octet contains the protocol version. The
+            second octet contains the protocol revision."
+        ::= { l2tpTunnelStatsEntry 8 }
+
+l2tpTunnelStatsInitialRemoteRWS OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the initial remote peer's
+            receive window size as indicated by the tunnel peer
+            (in the RWS AVP) during the tunnel establishment
+            phase. If the tunnel is idle this object should
+
+            maintain its value from the last time it was
+            connected."
+        ::= { l2tpTunnelStatsEntry 9 }
+
+l2tpTunnelStatsBearerCaps OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            digital(2),
+                            analog(3),
+                            digitalAnalog(4)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object describes the Bearer Capabilities of
+            the tunnel peer. If the tunnel is idle this object
+            should maintain its value from the last time it was
+            connected."
+        ::= { l2tpTunnelStatsEntry 10 }
+
+l2tpTunnelStatsFramingCaps OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            sync(2),
+                            async(3),
+                            syncAsync(4)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object describes the Framing Capabilities of
+            the tunnel peer. If the tunnel is idle this object
+            should maintain its value from the last time it was
+            connected."
+        ::= { l2tpTunnelStatsEntry 11 }
+
+l2tpTunnelStatsControlRxPkts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the number of control packets
+            received on the tunnel."
+        ::= { l2tpTunnelStatsEntry 12 }
+
+l2tpTunnelStatsControlRxZLB OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns a count of the number of Zero
+            Length Body control packet acknowledgement packets
+            that were received."
+        ::= { l2tpTunnelStatsEntry 13 }
+
+l2tpTunnelStatsControlOutOfSeq OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns a count of the number of
+            control packets that were not received in the
+            correct order (as per the sequence number)
+            on this tunnel including out of window
+            packets."
+        ::= { l2tpTunnelStatsEntry 14 }
+
+l2tpTunnelStatsControlOutOfWin OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the number of control
+            packets that were received outside of the
+            offered receive window. It is implementation
+            specific as to whether these packets are queued
+            or discarded."
+        ::= { l2tpTunnelStatsEntry 15 }
+
+l2tpTunnelStatsControlTxPkts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the number of control
+            packets that were transmitted to the tunnel
+            peer."
+        ::= { l2tpTunnelStatsEntry 16 }
+
+l2tpTunnelStatsControlTxZLB OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the number of Zero Length
+            Body control packets transmitted to the tunnel
+
+            peer."
+        ::= { l2tpTunnelStatsEntry 17 }
+
+l2tpTunnelStatsControlAckTO OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns a count of the number of
+            control packet timeouts due to the lack of a
+            timely acknowledgement from the tunnel peer."
+        ::= { l2tpTunnelStatsEntry 18 }
+
+l2tpTunnelStatsCurrentRemoteRWS OBJECT-TYPE
+        SYNTAX          Gauge32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the current remote receive
+            window size as determined by the local flow
+            control mechanism employed."
+        ::= { l2tpTunnelStatsEntry 19 }
+
+l2tpTunnelStatsTxSeq  OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the next send sequence number
+            for the control channel."
+        ::= { l2tpTunnelStatsEntry 20 }
+
+l2tpTunnelStatsTxSeqAck OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the send sequence number that
+            the tunnel peer has acknowledged for the control
+            channel. The flow control state can be determined
+            by subtracting the l2tpTunnelStatsTxSeq from
+            l2tpTunnelStatsTxSeqAck and comparing this value
+            to l2tpTunnelStatsCurrentRemoteRWS (taking into
+            consideration sequence number wraps)."
+        ::= { l2tpTunnelStatsEntry 21 }
+
+l2tpTunnelStatsRxSeq  OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the next receive sequence
+            number expected to be received on this control
+            channel."
+        ::= { l2tpTunnelStatsEntry 22 }
+
+l2tpTunnelStatsRxSeqAck OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the last receive sequence
+            number that was acknowledged back to the tunnel
+            peer for the control channel."
+        ::= { l2tpTunnelStatsEntry 23 }
+
+l2tpTunnelStatsTotalSessions OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the total number of sessions
+            that this tunnel has successfully connected through
+            to its tunnel peer since this tunnel was created."
+        ::= { l2tpTunnelStatsEntry 24 }
+
+l2tpTunnelStatsFailedSessions OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the total number of sessions
+            that were initiated but failed to reach the
+            established phase."
+        ::= { l2tpTunnelStatsEntry 25 }
+
+l2tpTunnelStatsActiveSessions OBJECT-TYPE
+        SYNTAX          Gauge32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the total number of sessions
+            in the established state for this tunnel."
+        ::= { l2tpTunnelStatsEntry 26 }
+
+l2tpTunnelStatsLastResultCode OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the last value of the result
+            code as described in the Result Code AVP which
+            caused the tunnel to disconnect."
+        ::= { l2tpTunnelStatsEntry 27 }
+
+l2tpTunnelStatsLastErrorCode OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the last value of the error
+            code as described in the Result Code AVP which
+            caused the tunnel to disconnect."
+        ::= { l2tpTunnelStatsEntry 28 }
+
+l2tpTunnelStatsLastErrorMessage OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the last value of the optional
+            message as described in the Result Code AVP which
+            caused the tunnel to disconnect."
+        ::= { l2tpTunnelStatsEntry 29 }
+
+l2tpTunnelStatsDrainingTunnel OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object indicates if this tunnel is draining
+            off sessions. This object will return false(2) when
+            the tunnel is not draining sessions or after the
+            last session has disconnected when the tunnel is in
+            the draining state."
+        ::= { l2tpTunnelStatsEntry 30 }
+
+--
+--      { l2tpObjects 6 } reserved for future use
+--
+
+--
+--      The L2TP Session Status and Statistics Table
+--
+
+l2tpSessionStatsTable   OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpSessionStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP session status and statistics table. This
+            table contains the objects that can be used to
+            describe the current status and statistics of a
+            single L2TP tunneled session."
+        ::= { l2tpObjects 7 }
+
+l2tpSessionStatsEntry   OBJECT-TYPE
+        SYNTAX          L2tpSessionStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP session interface stats entry."
+        INDEX { l2tpSessionStatsTunnelIfIndex,
+                l2tpSessionStatsLocalSID }
+        ::= { l2tpSessionStatsTable 1 }
+
+L2tpSessionStatsEntry ::=
+        SEQUENCE {
+            l2tpSessionStatsTunnelIfIndex
+                InterfaceIndex,
+            l2tpSessionStatsIfIndex
+                InterfaceIndex,
+            l2tpSessionStatsLocalSID
+                Integer32,
+            l2tpSessionStatsRemoteSID
+                Integer32,
+            l2tpSessionStatsUserName
+                SnmpAdminString,
+            l2tpSessionStatsState
+                INTEGER,
+            l2tpSessionStatsCallType
+                INTEGER,
+            l2tpSessionStatsCallSerialNumber
+                Unsigned32,
+            l2tpSessionStatsTxConnectSpeed
+                Unsigned32,
+            l2tpSessionStatsRxConnectSpeed
+                Unsigned32,
+            l2tpSessionStatsCallBearerType
+                INTEGER,
+            l2tpSessionStatsFramingType
+                INTEGER,
+            l2tpSessionStatsPhysChanId
+
+                Unsigned32,
+            l2tpSessionStatsDNIS
+                SnmpAdminString,
+            l2tpSessionStatsCLID
+                SnmpAdminString,
+            l2tpSessionStatsSubAddress
+                SnmpAdminString,
+            l2tpSessionStatsPrivateGroupID
+                SnmpAdminString,
+            l2tpSessionStatsProxyLcp
+                TruthValue,
+            l2tpSessionStatsAuthMethod
+                INTEGER,
+            l2tpSessionStatsSequencingState
+                INTEGER,
+            l2tpSessionStatsOutSequence
+                Counter32,
+            l2tpSessionStatsReassemblyTO
+                Counter32,
+            l2tpSessionStatsTxSeq
+                Integer32,
+            l2tpSessionStatsRxSeq
+                Integer32
+        }
+
+l2tpSessionStatsTunnelIfIndex OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the session's associated
+            L2TP tunnel ifIndex value."
+        ::= { l2tpSessionStatsEntry 1 }
+
+l2tpSessionStatsIfIndex OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the ifIndex value of the
+            interface from which PPP packets are being tunneled.
+            For example this could be a DS0 ifIndex on a
+            LAC or it would be the PPP ifIndex on the LNS."
+        ::= { l2tpSessionStatsEntry 2 }
+
+l2tpSessionStatsLocalSID OBJECT-TYPE
+        SYNTAX          Integer32 (1..65535)
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This object contains the local assigned session
+            identifier for this session."
+        REFERENCE "RFC 2661, Section 3.1"
+        ::= { l2tpSessionStatsEntry 3 }
+
+l2tpSessionStatsRemoteSID OBJECT-TYPE
+        SYNTAX          Integer32  (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the remote assigned session
+            identifier for this session. When a session is
+            starting this value may be zero until the remote
+            tunnel endpoint has responded."
+        REFERENCE "RFC 2661, Section 3.1"
+        ::= { l2tpSessionStatsEntry 4 }
+
+l2tpSessionStatsUserName OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the peer session name on
+            this interface. This is typically the login name
+            of the remote user. If the user name is unknown to
+            the local tunnel peer then this object will contain
+            a null string."
+        ::= { l2tpSessionStatsEntry 5 }
+
+l2tpSessionStatsState   OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            sessionIdle(1),
+                            sessionConnecting(2),
+                            sessionEstablished(3),
+                            sessionDisconnecting(4)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the current state of the
+            session."
+        ::= { l2tpSessionStatsEntry 6 }
+
+l2tpSessionStatsCallType OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            lacIncoming(1),
+                            lnsIncoming(2),
+                            lacOutgoing(3),
+                            lnsOutgoing(4)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object indicates the type of call and the
+            role this tunnel peer is providing for this
+            session. For example, lacIncoming(1) indicates
+            that this tunnel peer is acting as a LAC and
+            generated a Incoming-Call-Request to the tunnel
+            peer (the LNS). Note that tunnel peers can be
+            both LAC and LNS simultaneously."
+        ::= { l2tpSessionStatsEntry 7 }
+
+l2tpSessionStatsCallSerialNumber OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the serial number that has
+            been assigned to this  session."
+        ::= { l2tpSessionStatsEntry 8 }
+
+l2tpSessionStatsTxConnectSpeed OBJECT-TYPE
+        SYNTAX          Unsigned32
+        UNITS           "bits per second"
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the last known transmit
+            baud rate for this session."
+        ::= { l2tpSessionStatsEntry 9 }
+
+l2tpSessionStatsRxConnectSpeed OBJECT-TYPE
+        SYNTAX          Unsigned32
+        UNITS           "bits per second"
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the last known receive
+            baud rate for this session established."
+        ::= { l2tpSessionStatsEntry 10 }
+
+l2tpSessionStatsCallBearerType OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            digital(2),
+                            analog(3)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object describes the bearer type of this
+            session."
+        ::= { l2tpSessionStatsEntry 11 }
+
+l2tpSessionStatsFramingType OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            sync(2),
+                            async(3)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object describes the framing type of this
+            session."
+        ::= { l2tpSessionStatsEntry 12 }
+
+l2tpSessionStatsPhysChanId OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the physical channel
+            identifier for the session."
+        ::= { l2tpSessionStatsEntry 13 }
+
+l2tpSessionStatsDNIS    OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the Dialed Number
+            Information String that the LAC obtained from
+            the network for the session. If no DNIS was
+            provided then a null string will be returned."
+        ::= { l2tpSessionStatsEntry 14 }
+
+l2tpSessionStatsCLID    OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the Calling Line ID
+            that the LAC obtained from the network for
+            the session. If no CLID was provided then a
+            null string will be returned."
+        ::= { l2tpSessionStatsEntry 15 }
+
+l2tpSessionStatsSubAddress OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the Sub Address that
+            the LAC obtained from the network for the
+            session. If no Sub Address was provided then
+            a null string will be returned."
+        ::= { l2tpSessionStatsEntry 16 }
+
+l2tpSessionStatsPrivateGroupID OBJECT-TYPE
+        SYNTAX          SnmpAdminString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the Private Group
+            Identifier used for this tunneled session.
+            If no Private Group Identifier was provided
+            then a null string will be returned."
+        ::= { l2tpSessionStatsEntry 17 }
+
+l2tpSessionStatsProxyLcp OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "Indicates whether the LAC performed proxy LCP
+            for this session."
+        ::= { l2tpSessionStatsEntry 18 }
+
+l2tpSessionStatsAuthMethod OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            text(2),
+                            pppChap(3),
+                            pppPap(4),
+                            pppEap(5),
+                            pppMsChapV1(6),
+                            pppMsChapV2(7),
+                            other(8)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the proxy authentication
+            method employed by the LAC for the session. If
+            l2tpSessionProxyLcp is false(2) this object
+            should not be interpreted."
+        ::= { l2tpSessionStatsEntry 19 }
+
+l2tpSessionStatsSequencingState OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            none(1),
+                            remote(2),
+                            local(3),
+                            both(4)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object defines which tunnel peers have
+            requested payload sequencing. The value of
+            both(4) indicates that both peers have requested
+            payload sequencing."
+        ::= { l2tpSessionStatsEntry 20 }
+
+l2tpSessionStatsOutSequence OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the total number of packets
+            received for this session which were received out
+            of sequence."
+        ::= { l2tpSessionStatsEntry 21 }
+
+l2tpSessionStatsReassemblyTO OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object returns the number of reassembly
+            timeouts that have occurred for this session."
+        ::= { l2tpSessionStatsEntry 22 }
+
+l2tpSessionStatsTxSeq OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the next send sequence number
+            for for this session."
+        ::= { l2tpSessionStatsEntry 23 }
+
+l2tpSessionStatsRxSeq OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the next receive sequence
+            number expected to be received on this session."
+        ::= { l2tpSessionStatsEntry 24 }
+
+--
+--      The L2TP Tunnel Mapping Table
+--
+
+l2tpTunnelMapTable      OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpTunnelMapEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP Tunnel index mapping table. This table
+            is intended to assist management applications
+            to quickly determine what the ifIndex value is
+            for a given local tunnel identifier."
+        ::= { l2tpObjects 8 }
+
+l2tpTunnelMapEntry OBJECT-TYPE
+        SYNTAX          L2tpTunnelMapEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP tunnel index map entry."
+        INDEX { l2tpTunnelMapLocalTID }
+        ::= { l2tpTunnelMapTable 1 }
+
+L2tpTunnelMapEntry ::=
+        SEQUENCE {
+            l2tpTunnelMapLocalTID
+                Integer32,
+            l2tpTunnelMapIfIndex
+                InterfaceIndex
+        }
+
+l2tpTunnelMapLocalTID   OBJECT-TYPE
+        SYNTAX          Integer32 (1..65535)
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This object contains the local tunnel Identifier."
+        REFERENCE "RFC 2661, Section 3.1"
+        ::= { l2tpTunnelMapEntry 1 }
+
+l2tpTunnelMapIfIndex    OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This value for this object is equal to the value
+            of ifIndex of the Interfaces MIB for tunnel
+            interfaces of type L2TP."
+        ::= { l2tpTunnelMapEntry 2 }
+
+--
+--      The L2TP Session Mapping Table
+--
+
+l2tpSessionMapTable     OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpSessionMapEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP Session index mapping table. This table
+            is intended to assist management applications
+            to map interfaces to a tunnel and session
+            identifier."
+        ::= { l2tpObjects 9 }
+
+l2tpSessionMapEntry     OBJECT-TYPE
+        SYNTAX          L2tpSessionMapEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP Session index map entry."
+        INDEX { l2tpSessionMapIfIndex }
+        ::= { l2tpSessionMapTable 1 }
+
+L2tpSessionMapEntry ::=
+        SEQUENCE {
+            l2tpSessionMapIfIndex
+                InterfaceIndex,
+            l2tpSessionMapTunnelIfIndex
+                InterfaceIndex,
+            l2tpSessionMapLocalSID
+
+                Integer32,
+            l2tpSessionMapStatus
+                RowStatus
+        }
+
+l2tpSessionMapIfIndex   OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the ifIndex value of the
+            interface which is receiving or sending its packets
+            over an L2TP tunnel. For example this could be a DS0
+            ifIndex on a LAC or a PPP ifIndex on the LNS."
+        ::= { l2tpSessionMapEntry 1 }
+
+l2tpSessionMapTunnelIfIndex OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "This object identifies the sessions associated
+            L2TP tunnel ifIndex value. When this object is
+            set it provides a binding between a particular
+            interface identified by l2tpSessionMapIfIndex
+            to a particular tunnel."
+        ::= { l2tpSessionMapEntry 2 }
+
+l2tpSessionMapLocalSID  OBJECT-TYPE
+        SYNTAX          Integer32 (1..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object contains the local assigned session
+            identifier for this session."
+        REFERENCE "RFC 2661, Section 3.1"
+        ::= { l2tpSessionMapEntry 3 }
+
+l2tpSessionMapStatus    OBJECT-TYPE
+        SYNTAX          RowStatus
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "The status of this session map entry."
+        ::= { l2tpSessionMapEntry 4 }
+
+--
+--      { l2tpIpUdpObjects 1 } reserved for future use
+
+--
+--      The L2TP UDP/IP Transport Status and Statistics Table
+--
+
+l2tpUdpStatsTable       OBJECT-TYPE
+        SYNTAX          SEQUENCE OF L2tpUdpStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "The L2TP UDP/IP transport stats table. This table
+            contains objects that can be used to describe the
+            current status and statistics of the UDP/IP L2TP
+            tunnel transport."
+        ::= { l2tpIpUdpObjects 2 }
+
+l2tpUdpStatsEntry       OBJECT-TYPE
+        SYNTAX          L2tpUdpStatsEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "An L2TP UDP/IP transport stats entry."
+        INDEX { l2tpUdpStatsIfIndex }
+        ::= { l2tpUdpStatsTable 1 }
+
+L2tpUdpStatsEntry ::=
+        SEQUENCE {
+            l2tpUdpStatsIfIndex
+                InterfaceIndex,
+            l2tpUdpStatsPeerPort
+                Integer32,
+            l2tpUdpStatsLocalPort
+                Integer32
+        }
+
+l2tpUdpStatsIfIndex     OBJECT-TYPE
+        SYNTAX          InterfaceIndex
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+           "This value for this object is equal to the
+            value of ifIndex of the Interfaces MIB for
+            tunnel interfaces of type L2TP and which have
+            a L2TP transport of UDP/IP."
+        ::= { l2tpUdpStatsEntry 1 }
+
+l2tpUdpStatsPeerPort    OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object reflects the peer's UDP port number
+            used for this tunnel. When not known a value of
+            zero should be returned."
+        ::= { l2tpUdpStatsEntry 2 }
+
+l2tpUdpStatsLocalPort   OBJECT-TYPE
+        SYNTAX          Integer32 (0..65535)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+           "This object reflects the local UDP port number
+            that this tunnel is bound to."
+        ::= { l2tpUdpStatsEntry 3 }
+
+--
+--      Definition of generic L2TP notifications
+--
+
+l2tpTunnelAuthFailure NOTIFICATION-TYPE
+        OBJECTS         {
+                        l2tpTunnelStatsInitiated,
+                        l2tpTunnelStatsRemoteHostName
+                        }
+        STATUS          current
+        DESCRIPTION
+           "A l2tpTunnelAuthFailure trap signifies that an
+            attempt to establish a tunnel to a remote peer
+            has failed authentication."
+        ::= { l2tpNotifications 1 }
+
+--
+--      conformance information
+--
+
+l2tpGroups      OBJECT IDENTIFIER ::= { l2tpConformance 1 }
+l2tpCompliances OBJECT IDENTIFIER ::= { l2tpConformance 2 }
+
+--
+--      compliance statements
+--
+
+l2tpMIBFullCompliance MODULE-COMPLIANCE
+        STATUS          current
+        DESCRIPTION
+           "When this MIB is implemented with support for
+            read-create and read-write, then such an
+
+            implementation can claim full compliance. Such
+            an implementation can then be both monitored
+            and configured with this MIB."
+
+        MODULE          -- this module
+
+     -- unconditionally mandatory groups
+        MANDATORY-GROUPS {
+                            l2tpConfigGroup,
+                            l2tpStatsGroup,
+                            l2tpTrapGroup
+                         }
+     -- conditionally mandatory groups
+        GROUP           l2tpIpUdpGroup
+        DESCRIPTION
+           "This group is mandatory for implementations that
+            support L2TP over UDP/IP."
+
+     -- optional groups
+        GROUP           l2tpDomainGroup
+        DESCRIPTION
+           "This group is optional for L2TP devices that
+            group tunnel endpoints into tunnel domains."
+
+     -- optional Mapping Group
+        GROUP           l2tpMappingGroup
+        DESCRIPTION
+           "This group is optional for L2TP devices that
+            provide index mapping."
+
+     -- optional Security Group
+        GROUP           l2tpSecurityGroup
+        DESCRIPTION
+           "This group is optional for SNMP agents which support
+            both authentication and privacy of SNMP messages for
+            the management of L2TP keys."
+
+     -- optional High Capacity Group
+        GROUP           l2tpHCPacketGroup
+        DESCRIPTION
+           "This group is mandatory for implementations that
+            support the l2tpDomainGroup AND could potentially
+            overflow the L2TP Domain 32-bit counters is less
+            than one hour."
+       ::= { l2tpCompliances 1 }
+
+l2tpMIBReadOnlyCompliance MODULE-COMPLIANCE
+        STATUS          current
+        DESCRIPTION
+           "When this MIB is implemented without support for
+            read-create and read-write (i.e. in read-only mode),
+            then such an implementation can claim read-only
+            compliance. Such an implementation can then be
+            monitored but can not be configured with this MIB."
+
+        MODULE          -- this module
+
+     -- unconditionally mandatory groups
+        MANDATORY-GROUPS {
+                            l2tpConfigGroup,
+                            l2tpStatsGroup,
+                            l2tpTrapGroup
+                         }
+
+        OBJECT   l2tpAdminState
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDrainTunnels
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigDomainId
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigHelloInterval
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigIdleTimeout
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigControlRWS
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigControlMaxRetx
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigControlMaxRetxTO
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigPayloadSeq
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigReassemblyTO
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigTransport
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigDrainTunnel
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigProxyPPPAuth
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+     -- conditionally mandatory groups
+        GROUP           l2tpIpUdpGroup
+        DESCRIPTION
+           "This group is mandatory for implementations that
+            support L2TP over UDP/IP."
+
+     -- optional groups
+        GROUP           l2tpDomainGroup
+        DESCRIPTION
+           "This group is optional for L2TP devices that
+            group tunnel endpoints into tunnel domains."
+
+        OBJECT   l2tpDomainConfigAdminState
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigDrainTunnels
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigTunnelHelloInt
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigTunnelIdleTO
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigControlRWS
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigControlMaxRetx
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigControlMaxRetxTO
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigPayloadSeq
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigReassemblyTO
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigProxyPPPAuth
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+     -- optional Mapping Group
+        GROUP           l2tpMappingGroup
+        DESCRIPTION
+           "This group is optional for L2TP devices that
+            provide index mapping."
+
+        OBJECT   l2tpSessionMapTunnelIfIndex
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpSessionMapStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+     -- optional Security Group
+        GROUP           l2tpSecurityGroup
+        DESCRIPTION
+           "This group is optional for SNMP agents which support
+            both authentication and privacy of SNMP messages for
+            the management of L2TP keys."
+
+        OBJECT   l2tpDomainConfigAuth
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigSecret
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpDomainConfigTunnelSecurity
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigAuth
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigSecret
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT   l2tpTunnelConfigSecurity
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+     -- optional High Capacity Group
+        GROUP           l2tpHCPacketGroup
+        DESCRIPTION
+           "This group is mandatory for implementations that
+            support the l2tpDomainGroup AND could potentially
+            overflow the L2TP Domain 32-bit counters is less
+            than one hour."
+        ::= { l2tpCompliances 2 }
+
+-- units of conformance
+
+l2tpConfigGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpAdminState,
+            l2tpDrainTunnels,
+            l2tpTunnelConfigDomainId,
+            l2tpTunnelConfigHelloInterval,
+            l2tpTunnelConfigIdleTimeout,
+            l2tpTunnelConfigControlRWS,
+            l2tpTunnelConfigControlMaxRetx,
+            l2tpTunnelConfigControlMaxRetxTO,
+            l2tpTunnelConfigPayloadSeq,
+            l2tpTunnelConfigReassemblyTO,
+            l2tpTunnelConfigTransport,
+            l2tpTunnelConfigDrainTunnel,
+            l2tpTunnelConfigProxyPPPAuth
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing configuration
+            information of the L2TP protocol, tunnels and
+            sessions."
+        ::= { l2tpGroups 1 }
+
+l2tpStatsGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpProtocolVersions,
+            l2tpVendorName,
+            l2tpFirmwareRev,
+            l2tpDrainingTunnels,
+            l2tpTunnelStatsLocalTID,
+            l2tpTunnelStatsRemoteTID,
+            l2tpTunnelStatsState,
+            l2tpTunnelStatsInitiated,
+            l2tpTunnelStatsRemoteHostName,
+            l2tpTunnelStatsRemoteVendorName,
+            l2tpTunnelStatsRemoteFirmwareRev,
+            l2tpTunnelStatsRemoteProtocolVer,
+            l2tpTunnelStatsInitialRemoteRWS,
+            l2tpTunnelStatsBearerCaps,
+            l2tpTunnelStatsFramingCaps,
+            l2tpTunnelStatsControlRxPkts,
+            l2tpTunnelStatsControlRxZLB,
+            l2tpTunnelStatsControlOutOfSeq,
+            l2tpTunnelStatsControlOutOfWin,
+            l2tpTunnelStatsControlTxPkts,
+            l2tpTunnelStatsControlTxZLB,
+            l2tpTunnelStatsControlAckTO,
+            l2tpTunnelStatsCurrentRemoteRWS,
+            l2tpTunnelStatsTxSeq,
+            l2tpTunnelStatsTxSeqAck,
+            l2tpTunnelStatsRxSeq,
+            l2tpTunnelStatsRxSeqAck,
+            l2tpTunnelStatsTotalSessions,
+            l2tpTunnelStatsFailedSessions,
+            l2tpTunnelStatsActiveSessions,
+            l2tpTunnelStatsLastResultCode,
+            l2tpTunnelStatsLastErrorCode,
+            l2tpTunnelStatsLastErrorMessage,
+            l2tpTunnelStatsDrainingTunnel,
+            l2tpSessionStatsIfIndex,
+            l2tpSessionStatsRemoteSID,
+            l2tpSessionStatsUserName,
+            l2tpSessionStatsState,
+            l2tpSessionStatsCallType,
+            l2tpSessionStatsCallSerialNumber,
+            l2tpSessionStatsTxConnectSpeed,
+            l2tpSessionStatsRxConnectSpeed,
+            l2tpSessionStatsCallBearerType,
+            l2tpSessionStatsFramingType,
+            l2tpSessionStatsPhysChanId,
+            l2tpSessionStatsDNIS,
+            l2tpSessionStatsCLID,
+            l2tpSessionStatsSubAddress,
+            l2tpSessionStatsPrivateGroupID,
+            l2tpSessionStatsProxyLcp,
+            l2tpSessionStatsAuthMethod,
+            l2tpSessionStatsSequencingState,
+            l2tpSessionStatsOutSequence,
+            l2tpSessionStatsReassemblyTO,
+            l2tpSessionStatsTxSeq,
+            l2tpSessionStatsRxSeq
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing status and
+            statistics of the L2TP protocol, tunnels and
+            sessions."
+        ::= { l2tpGroups 2 }
+
+l2tpIpUdpGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpUdpStatsPeerPort,
+            l2tpUdpStatsLocalPort
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing status and
+            statistics of the L2TP UDP/IP transport layer."
+        ::= { l2tpGroups 3 }
+
+l2tpDomainGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpDomainConfigAdminState,
+            l2tpDomainConfigDrainTunnels,
+            l2tpDomainConfigTunnelHelloInt,
+            l2tpDomainConfigTunnelIdleTO,
+            l2tpDomainConfigControlRWS,
+            l2tpDomainConfigControlMaxRetx,
+            l2tpDomainConfigControlMaxRetxTO,
+            l2tpDomainConfigPayloadSeq,
+            l2tpDomainConfigReassemblyTO,
+            l2tpDomainConfigProxyPPPAuth,
+            l2tpDomainConfigStorageType,
+            l2tpDomainConfigStatus,
+            l2tpDomainStatsTotalTunnels,
+            l2tpDomainStatsFailedTunnels,
+            l2tpDomainStatsFailedAuths,
+            l2tpDomainStatsActiveTunnels,
+            l2tpDomainStatsTotalSessions,
+            l2tpDomainStatsFailedSessions,
+            l2tpDomainStatsActiveSessions,
+            l2tpDomainStatsDrainingTunnels,
+            l2tpDomainStatsControlRxOctets,
+            l2tpDomainStatsControlRxPkts,
+            l2tpDomainStatsControlTxOctets,
+            l2tpDomainStatsControlTxPkts,
+            l2tpDomainStatsPayloadRxOctets,
+            l2tpDomainStatsPayloadRxPkts,
+            l2tpDomainStatsPayloadRxDiscs,
+            l2tpDomainStatsPayloadTxOctets,
+            l2tpDomainStatsPayloadTxPkts
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing configuration,
+            status and statistics of L2TP tunnel domains."
+        ::= { l2tpGroups 4 }
+
+l2tpMappingGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpTunnelMapIfIndex,
+            l2tpSessionMapTunnelIfIndex,
+            l2tpSessionMapLocalSID,
+            l2tpSessionMapStatus
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing index mapping."
+        ::= { l2tpGroups 5 }
+
+l2tpSecurityGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpDomainConfigAuth,
+            l2tpDomainConfigSecret,
+            l2tpDomainConfigTunnelSecurity,
+            l2tpTunnelConfigAuth,
+            l2tpTunnelConfigSecret,
+            l2tpTunnelConfigSecurity
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing L2TP security
+            configuration."
+        ::= { l2tpGroups 6 }
+
+l2tpTrapGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+            l2tpTunnelAuthFailure
+        }
+        STATUS          current
+        DESCRIPTION
+           "A collection of L2TP trap events as specified
+            in NOTIFICATION-TYPE constructs."
+        ::= { l2tpGroups 7 }
+
+l2tpHCPacketGroup OBJECT-GROUP
+        OBJECTS {
+            l2tpDomainStatsControlHCRxOctets,
+            l2tpDomainStatsControlHCRxPkts,
+            l2tpDomainStatsControlHCTxOctets,
+            l2tpDomainStatsControlHCTxPkts,
+            l2tpDomainStatsPayloadHCRxOctets,
+            l2tpDomainStatsPayloadHCRxPkts,
+            l2tpDomainStatsPayloadHCRxDiscs,
+            l2tpDomainStatsPayloadHCTxOctets,
+            l2tpDomainStatsPayloadHCTxPkts
+         }
+        STATUS          current
+        DESCRIPTION
+           "A collection of objects providing High Capacity
+            64-bit counter objects."
+        ::= { l2tpGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/LANGTAG-TC-MIB.mib b/snmp_builder/mibs/LANGTAG-TC-MIB.mib
new file mode 100644
index 0000000..c6058ad
--- /dev/null
+++ b/snmp_builder/mibs/LANGTAG-TC-MIB.mib
@@ -0,0 +1,56 @@
+LANGTAG-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2             FROM SNMPv2-SMI      -- [RFC2578]
+    TEXTUAL-CONVENTION                 FROM SNMPv2-TC;      -- [RFC2579]
+
+langTagTcMIB MODULE-IDENTITY
+    LAST-UPDATED "200711090000Z" -- 9 November 2007
+    ORGANIZATION "IETF Operations and Management (OPS) Area"
+    CONTACT-INFO "EMail: ops-area@ietf.org
+                  Home page: http://www.ops.ietf.org/"
+    DESCRIPTION
+            "This MIB module defines a textual convention for
+            representing BCP 47 language tags."
+    REVISION     "200711090000Z" -- 9 November 2007
+    DESCRIPTION
+           "Initial revision, published as RFC 5131.
+
+            Copyright (C) The IETF Trust (2007).  This version of this
+            MIB module is part of RFC 5131; see the RFC itself for full
+            legal notices."
+    ::= { mib-2 165 }
+
+LangTag ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "1a"
+   STATUS      current
+   DESCRIPTION
+            "A language tag, constructed in accordance with BCP 47.
+
+            Only lowercase characters are allowed.  The purpose of this
+            restriction is to provide unique language tags for use as
+            indexes.  BCP 47 recommends case conventions for user
+            interfaces, but objects using this TEXTUAL-CONVENTION MUST
+            use only lowercase.
+
+            Values MUST be well-formed language tags, in conformance
+            with the definition of well-formed tags in BCP 47.  An
+            implementation MAY further limit the values it accepts to
+            those permitted by a 'validating' processor, as defined in
+            BCP 47.
+
+            In theory, BCP 47 language tags are of unlimited length.
+            The language tag described in this TEXTUAL-CONVENTION is of
+            limited length.  The analysis of language tag lengths in BCP
+            47 confirms that this limit will not pose a problem in
+            practice.  In particular, this length is greater than the
+
+            minimum requirements set out in Section 4.3.1.
+
+            A zero-length language tag is not a valid language tag.
+            This can be used to express 'language tag absent' where
+            required, for example, when used as an index field."
+   REFERENCE "RFC 4646 BCP 47"
+   SYNTAX      OCTET STRING (SIZE (0 | 2..63))
+
+END
diff --git a/snmp_builder/mibs/LBD.mib b/snmp_builder/mibs/LBD.mib
new file mode 100644
index 0000000..c908c62
--- /dev/null
+++ b/snmp_builder/mibs/LBD.mib
@@ -0,0 +1,266 @@
+-- -----------------------------------------------------------------------------
+-- MIB NAME : Loopback-Detect mib
+-- FILE NAME: LBD.mib
+-- DATE     : 2010/03/01
+-- VERSION  : 1.14
+-- PURPOSE  : To construct the MIB structure of Loopback Detect function
+--            for proprietary enterprise
+-- -----------------------------------------------------------------------------
+-- MODIFICTION HISTORY:
+-- -----------------------------------------------------------------------------
+-- Version, Date, Author
+-- Description:
+--  [New Object]
+--  [Modification]
+-- Notes: (Requested by who and which project)    
+--  
+-- Version 1.14, 2010/03/01, Jessy Ji
+-- [New Object]
+--   Add swLoopDetectLogState to control the LBD log state.  
+-- Request by Jessy Ji for project DGS3120.	
+--
+-- Version 1.13, 2008/10/06, Green Zhu
+-- [Modification]
+--   Change the loop_detected,and loop_cleared to loop-detected and loop-cleared.
+--
+-- Version 1.12, 2008/9/26, Green Zhu
+-- [Modification]
+--   Rename all trap objects. 
+--
+-- Version 1.11, 2008/9/16, Wesley Wang
+-- Request By Wesley Wang for project DGS3400
+-- [New Object]
+--   Add swLoopDetectTrapMode
+--
+-- Version 1.10, 2008/09/02, Elvis Tsai
+-- [New Object]
+--   Add Notify Prefix
+--      swL2PortLoopOccurred, swL2PortLoopRestart, swL2VlanLoopOccurred, swL2VlanLoopRestart
+--   Add Binding object for trap
+--      swVlanLoopDetectVID
+--
+-- Version 1.00, 2007/7/23, Elvis Tsai
+-- This is the first formal version for universal MIB definition.
+-- -----------------------------------------------------------------------------
+
+    LOOPBACK-DETECT-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY,OBJECT-TYPE     FROM SNMPv2-SMI
+        DisplayString                   FROM RFC1213-MIB
+        dlink-common-mgmt               FROM DLINK-ID-REC-MIB;
+
+    swLoopDetectMIB MODULE-IDENTITY
+	    LAST-UPDATED "1003010000Z"
+	    ORGANIZATION "D-Link Corp."
+	    CONTACT-INFO
+	        "http://support.dlink.com"
+        DESCRIPTION
+            "The structure of loopback detection management for the
+            proprietary enterprise."
+        ::= { dlink-common-mgmt 41 }
+
+    swLoopDetectCtrl                OBJECT IDENTIFIER ::= { swLoopDetectMIB 1 }
+    swLoopDetectInfo                OBJECT IDENTIFIER ::= { swLoopDetectMIB 2 }
+    swLoopDetectPortMgmt            OBJECT IDENTIFIER ::= { swLoopDetectMIB 3 }
+
+    swLoopDetectNotify              OBJECT IDENTIFIER ::= { swLoopDetectMIB 10 }
+
+-- ----------------------------------------------------------------------------
+--  swLoopDetectMgmt
+-- ----------------------------------------------------------------------------
+    swLoopDetectAdminState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the loopback detection status for the system."
+        ::= { swLoopDetectCtrl 1 }
+
+    swLoopDetectInterval OBJECT-TYPE
+        SYNTAX      INTEGER (1..32767)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the interval value. The range is from 1 to 32767 seconds."
+        ::= { swLoopDetectCtrl 2 }
+
+    swLoopDetectRecoverTime OBJECT-TYPE
+        SYNTAX      INTEGER (0..1000000)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the recover time. The range is from 60 to 1000000.
+             The value of 0 disables the recover function."
+        ::= { swLoopDetectCtrl 3 }
+
+    swLoopDetectMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       vlan-based(1),
+                       port-based(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the loopback detection mode for the system."
+        ::= { swLoopDetectCtrl 4 }
+
+    swLoopDetectTrapMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       none(1),
+                       loop-detected(2),
+                       loop-cleared(3),
+                       both(4)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the loopback detection trap mode for the system."
+        ::= { swLoopDetectCtrl 5 } 
+         
+    swLoopDetectLogState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the LBD log state."
+		DEFVAL {enabled}
+        ::= { swLoopDetectCtrl 6 }
+        
+-- ----------------------------------------------------------------------------
+    swLoopDetectPortTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF SwLoopDetectPortEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The table specifies the loopback detection function specified by port."
+        ::= { swLoopDetectPortMgmt 1 }
+
+    swLoopDetectPortEntry OBJECT-TYPE
+        SYNTAX      SwLoopDetectPortEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The table specifies the loopback detection function specified by port."
+        INDEX  { swLoopDetectPortIndex }
+        ::= { swLoopDetectPortTable 1 }
+
+    SwLoopDetectPortEntry ::=
+        SEQUENCE {
+            swLoopDetectPortIndex
+                INTEGER,
+            swLoopDetectPortState
+                INTEGER,
+            swLoopDetectPortLoopVLAN
+                DisplayString,
+            swLoopDetectPortLoopStatus
+                INTEGER
+        }
+
+    swLoopDetectPortIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..65535)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the module's port number. The range is from 1 to
+             the maximum port number specified in the module"
+        ::= { swLoopDetectPortEntry 1 }
+
+    swLoopDetectPortState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the loopback detection function state on the port."
+        ::= { swLoopDetectPortEntry 2 }
+
+    swLoopDetectPortLoopVLAN OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the VLAN list that has detected a loopback."
+        ::= { swLoopDetectPortEntry 3 }
+
+    swLoopDetectPortLoopStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                       normal(1),
+                       loop(2),
+                       error(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the port status."
+        ::= { swLoopDetectPortEntry 4 }
+
+-- ----------------------------------------------------------------------------
+--	swLoopDetectNotify        OBJECT IDENTIFIER ::= { swLoopDetectMIB 4 }
+-- ----------------------------------------------------------------------------
+	swLoopDetectNotifyPrefix   OBJECT IDENTIFIER ::= { swLoopDetectNotify 0 }
+
+    swPortLoopOccurred  NOTIFICATION-TYPE
+        OBJECTS
+             {
+                swLoopDetectPortIndex
+             }
+        STATUS  current
+        DESCRIPTION
+               "The trap is sent when a port loop occurs."
+        ::= { swLoopDetectNotifyPrefix 1 }
+
+    swPortLoopRestart  NOTIFICATION-TYPE
+        OBJECTS
+             {
+                swLoopDetectPortIndex
+             }
+        STATUS  current
+        DESCRIPTION
+              "The trap is sent when a port loop restarts after the interval time."
+        ::= { swLoopDetectNotifyPrefix 2 }
+
+    swVlanLoopOccurred  NOTIFICATION-TYPE
+        OBJECTS
+             {
+                swLoopDetectPortIndex,
+                swVlanLoopDetectVID
+             }
+        STATUS  current
+        DESCRIPTION
+               "The trap is sent when a Port with a VID loop occurs."
+        ::= { swLoopDetectNotifyPrefix 3 }
+
+    swVlanLoopRestart NOTIFICATION-TYPE
+        OBJECTS
+             {
+                swLoopDetectPortIndex,
+                swVlanLoopDetectVID
+             }
+        STATUS  current
+        DESCRIPTION
+               "The trap is sent when a Port with a VID loop restarts after the interval time."
+        ::= { swLoopDetectNotifyPrefix 4 }
+
+-- ----------------------------------------------------------------------------
+--  swLoopDetectNotificationBidings   OBJECT IDENTIFIER ::= { swLoopDetectNotify 1 }
+-- ----------------------------------------------------------------------------
+    swLoopDetectNotificationBidings   OBJECT IDENTIFIER ::= { swLoopDetectNotify 1 }
+
+    swVlanLoopDetectVID OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "This object indicates the VID that has detected a loopback."
+        ::= { swLoopDetectNotificationBidings 1 }
+
+END
diff --git a/snmp_builder/mibs/LMP-MIB.mib b/snmp_builder/mibs/LMP-MIB.mib
new file mode 100644
index 0000000..588fd0c
--- /dev/null
+++ b/snmp_builder/mibs/LMP-MIB.mib
@@ -0,0 +1,3185 @@
+LMP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   transmission, Unsigned32, Counter32, TimeTicks
+      FROM SNMPv2-SMI              -- RFC 2578
+
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF             -- RFC 2580
+
+   TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
+   TimeStamp
+
+      FROM SNMPv2-TC               -- RFC 2579
+
+   InterfaceIndexOrZero, ifIndex
+      FROM IF-MIB                  -- RFC 2863
+
+   InetAddressType, InetAddress
+      FROM INET-ADDRESS-MIB        -- RFC 4001
+
+   teLinkRemoteIpAddr, teLinkIncomingIfId, TeLinkEncodingType
+      FROM TE-LINK-STD-MIB;        -- RFC 4220
+
+lmpMIB MODULE-IDENTITY
+   LAST-UPDATED "200608140000Z"  -- 14 August 2006
+   ORGANIZATION "Common Control and Measurement Protocols (CCAMP)
+                 Working Group"
+   CONTACT-INFO
+       "        Martin Dubuc
+        Email:  dubuc.consulting@sympatico.ca
+
+                Thomas D. Nadeau
+        Email:  tnadeau@cisco.com
+
+                Jonathan P. Lang
+        Email:  jplang@ieee.org
+
+                Evan McGinnis
+        Email:  emcginnis@hammerheadsystems.com
+
+                Adrian Farrel
+        Email:  adrian@olddog.co.uk"
+   DESCRIPTION
+       "Copyright (C) 2006 The Internet Society.  This version of
+        the MIB module is part of RFC 4631; see the RFC itself
+        for full legal notices.
+
+        This MIB module contains managed object definitions for
+        the Link Management Protocol (LMP) as
+        defined in 'Link Management Protocol'."
+
+   -- Revision history.
+   REVISION
+       "200608140000Z"  -- 14 August 2006
+   DESCRIPTION
+       "Revised version:
+        - Fixes textual descriptions of TruthValue settings such that
+          True is always 1 and False is always 2.
+        - Adds punctuation to REFERENCE clauses.
+
+        This revision published as RFC 4631"
+   REVISION
+       "200601110000Z"  -- 11 January 2006
+   DESCRIPTION
+       "Initial version published as RFC 4327"
+   ::= { transmission 227 }
+
+-- Textual Conventions
+
+LmpInterval ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS        current
+   DESCRIPTION
+       "The interval delay, in milliseconds."
+   SYNTAX        Unsigned32 (1..65535)
+
+LmpRetransmitInterval ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS        current
+   DESCRIPTION
+       "The retransmission interval delay in milliseconds."
+   SYNTAX        Unsigned32 (1..4294967295)
+
+LmpNodeId ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT  "1d.1d.1d.1d"
+   STATUS        current
+   DESCRIPTION
+       "Represents a Node ID in network byte order.  Node ID is an
+        address of type IPv4."
+   REFERENCE
+       "Section 1.1 of Link Management Protocol, RFC 4204."
+   SYNTAX        OCTET STRING(SIZE(4))
+
+-- Top level components of this MIB
+
+-- Notifications
+lmpNotifications OBJECT IDENTIFIER ::= { lmpMIB 0 }
+-- Tables, Scalars
+lmpObjects       OBJECT IDENTIFIER ::= { lmpMIB 1 }
+-- Conformance
+lmpConformance   OBJECT IDENTIFIER ::= { lmpMIB 2 }
+
+lmpAdminStatus OBJECT-TYPE
+   SYNTAX        INTEGER { up(1), down(2) }
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "The desired operational status of LMP on the node.
+
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   DEFVAL        { up }
+   ::= { lmpObjects 1 }
+
+lmpOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER { up(1), down(2) }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of LMP on the node."
+   ::= { lmpObjects 2 }
+
+-- LMP Neighbor Table
+
+lmpNbrTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpNbrEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the neighbor node(s) to which control
+        channels may be established."
+   ::= { lmpObjects 3 }
+
+lmpNbrEntry OBJECT-TYPE
+   SYNTAX        LmpNbrEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by a LMP-enabled device for
+        every pair of nodes that can establish control channels."
+   INDEX         { lmpNbrNodeId }
+   ::= { lmpNbrTable 1 }
+
+LmpNbrEntry ::= SEQUENCE {
+  lmpNbrNodeId              LmpNodeId,
+  lmpNbrRetransmitInterval  LmpRetransmitInterval,
+  lmpNbrRetryLimit          Unsigned32,
+  lmpNbrRetransmitDelta     Unsigned32,
+  lmpNbrAdminStatus         INTEGER,
+  lmpNbrOperStatus          INTEGER,
+  lmpNbrRowStatus           RowStatus,
+  lmpNbrStorageType         StorageType
+}
+
+lmpNbrNodeId OBJECT-TYPE
+   SYNTAX        LmpNodeId
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the LmpNbrTable.
+        This value represents the remote Node ID."
+   ::= { lmpNbrEntry 1 }
+
+lmpNbrRetransmitInterval OBJECT-TYPE
+   SYNTAX        LmpRetransmitInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the initial retransmission interval that
+        is used for the retransmission of messages that require
+        acknowledgement.  This object, along with lmpNbrRetryLimit,
+        is used to implement the congestion-handling mechanism defined
+        in Section 10 of the Link Management Protocol specification,
+        which is based on RFC 2914."
+   REFERENCE
+       "Link Management Protocol, RFC 4204.
+
+        Congestion Control Principles, RFC 2914."
+   DEFVAL        { 500 }
+   ::= { lmpNbrEntry 2 }
+
+lmpNbrRetryLimit OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the maximum number of times a message
+        is transmitted without being acknowledged.  A value of 0 is used
+        to indicate that a node should never stop retransmission.
+        This object, along with lmpNbrRetransmitInterval, is
+        used to implement the congestion-handling mechanism as defined
+        in Section 10 of the Link Management Protocol specification,
+        which is based on RFC 2914."
+   REFERENCE
+       "Link Management Protocol, RFC 4204.
+        Congestion Control Principles, RFC 2914."
+   DEFVAL        { 3 }
+   ::= { lmpNbrEntry 3 }
+
+lmpNbrRetransmitDelta OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object governs the speed with which the sender increases
+        the retransmission interval, as explained in Section 10 of the
+        Link Management Protocol specification, which is based on
+        RFC 2914.  This value is a power used to express the
+        exponential backoff.  The ratio of two successive retransmission
+        intervals is (1 + Delta)."
+   REFERENCE
+       "Link Management Protocol, RFC 4204.
+        Congestion Control Principles, RFC 2914."
+   DEFVAL        { 1 }
+   ::= { lmpNbrEntry 4 }
+
+lmpNbrAdminStatus OBJECT-TYPE
+   SYNTAX        INTEGER { up(1), down(2) }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The desired operational status of LMP to this remote node."
+   ::= { lmpNbrEntry 5 }
+
+lmpNbrOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER { up(1), down(2) }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of LMP to this remote node."
+   ::= { lmpNbrEntry 6 }
+
+lmpNbrRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  None of the writable objects
+        in a row can be changed if the status is active(1).
+        All read-create objects must have valid and consistent
+        values before the row can be activated."
+   ::= { lmpNbrEntry 7 }
+
+lmpNbrStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        lmpNbrTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+
+        columnar object in the row."
+   DEFVAL        { nonVolatile }
+   ::= { lmpNbrEntry 8 }
+
+-- End of lmpNbrTable
+
+lmpCcHelloIntervalDefault OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the default value for the HelloInterval
+        parameter used in the Hello protocol keep-alive phase.  It
+        indicates how frequently LMP Hello messages will be sent.  It
+        is used as the default value for lmpCcHelloInterval.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpObjects 4 }
+
+lmpCcHelloIntervalDefaultMin OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the default minimum value for the
+        HelloInterval parameter.  It is used as a default value
+        for lmpCcHelloIntervalMin.  Implementations should save the
+        value of this object in persistent memory so that it survives
+        restarts or reboot."
+   ::= { lmpObjects 5 }
+
+lmpCcHelloIntervalDefaultMax OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the default maximum value for the
+        HelloInterval parameter.  It is used as a default value
+        for lmpCcHelloIntervalMax.  Implementations should save the
+        value of this object in persistent memory so that it survives
+        restarts or reboot."
+   ::= { lmpObjects 6 }
+
+lmpCcHelloDeadIntervalDefault OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the default HelloDeadInterval parameter
+        to use in the Hello protocol keep-alive phase.  It indicates
+        how long a device should wait before declaring the control
+        channel dead.  The HelloDeadInterval parameter should be at
+        least three times the value of HelloInterval.  It is used as
+        a default value for lmpCcHelloDeadInterval.  Implementations
+        should save the value of this object in persistent memory so
+        that it survives restarts or reboot."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpObjects 7 }
+
+lmpCcHelloDeadIntervalDefaultMin OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the default minimum value for the
+        HelloDeadInterval parameter.  It is used as a default value
+        for lmpCcHelloDeadIntervalMin.  Implementations should save
+        the value of this object in persistent memory so that it
+        survives restarts or reboot."
+   ::= { lmpObjects 8 }
+
+lmpCcHelloDeadIntervalDefaultMax OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the default maximum value for the
+        HelloDeadInterval parameter.  It is used as a default value
+        for lmpCcHelloDeadIntervalMax.  Implementations should save the
+        value of this object in persistent memory so that it survives
+        restarts or reboot."
+   ::= { lmpObjects 9 }
+
+-- LMP Control Channel Table
+
+lmpControlChannelTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpControlChannelEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies LMP control channel information."
+   ::= { lmpObjects 10 }
+
+lmpControlChannelEntry OBJECT-TYPE
+   SYNTAX        LmpControlChannelEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LMP-enabled device for
+        every control channel.  Whenever a new entry is created with
+        lmpCcIsIf set to true(1), a corresponding entry is
+        created in ifTable as well (see RFC 2863)."
+   INDEX         { lmpCcId }
+   ::= { lmpControlChannelTable 1 }
+
+LmpControlChannelEntry ::= SEQUENCE {
+  lmpCcId                            Unsigned32,
+  lmpCcUnderlyingIfIndex             InterfaceIndexOrZero,
+  lmpCcIsIf                          TruthValue,
+  lmpCcNbrNodeId                     LmpNodeId,
+  lmpCcRemoteId                      Unsigned32,
+  lmpCcRemoteAddressType             InetAddressType,
+  lmpCcRemoteIpAddr                  InetAddress,
+  lmpCcSetupRole                     INTEGER,
+  lmpCcAuthentication                TruthValue,
+  lmpCcHelloInterval                 LmpInterval,
+  lmpCcHelloIntervalMin              LmpInterval,
+  lmpCcHelloIntervalMax              LmpInterval,
+  lmpCcHelloIntervalNegotiated       LmpInterval,
+  lmpCcHelloDeadInterval             LmpInterval,
+  lmpCcHelloDeadIntervalMin          LmpInterval,
+  lmpCcHelloDeadIntervalMax          LmpInterval,
+  lmpCcHelloDeadIntervalNegotiated   LmpInterval,
+  lmpCcLastChange                    TimeTicks,
+  lmpCcAdminStatus                   INTEGER,
+  lmpCcOperStatus                    INTEGER,
+  lmpCcRowStatus                     RowStatus,
+  lmpCcStorageType                   StorageType
+}
+
+lmpCcId OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..4294967295)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This value represents the local control channel identifier.
+        The control channel identifier is a non-zero 32-bit number."
+   ::= { lmpControlChannelEntry 1 }
+
+lmpCcUnderlyingIfIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If lmpCcIsIf is set to true(1), this object carries the
+        index into the ifTable of the entry that represents the
+        LMP interface over which LMP will transmit its traffic.
+        If this object is set to zero but lmpCcIsIf is set to
+        true(1), the control channel is not currently associated
+        with any underlying interface, and the control channel's
+        operational status must not be up(1); nor should the
+        control channel forward or receive traffic.
+        If lmpCcIsIf is set to false(2), this object should be set
+        to zero and ignored."
+   ::= { lmpControlChannelEntry 2 }
+
+lmpCcIsIf OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "In implementations where the control channels are modeled
+        as interfaces, the value of this object is true(1), and
+        this control channel is represented by an interface in
+        the interfaces group table as indicated by the value of
+        lmpCcUnderlyingIfIndex.  If control channels are not
+        modeled as interfaces, the value of this object is
+        false(2), and there is no corresponding interface for
+        this control channel in the interfaces group table;
+        the value of lmpCcUnderlyingIfIndex should be
+        ignored."
+   ::= { lmpControlChannelEntry 3 }
+
+lmpCcNbrNodeId OBJECT-TYPE
+   SYNTAX        LmpNodeId
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the Node ID of the control channel remote node.
+        This value either is configured or gets created by the node
+        when a Config message is received or when an outgoing Config
+        message is acknowledged by the remote node."
+   ::= { lmpControlChannelEntry 4 }
+
+lmpCcRemoteId OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value represents the remote control channel identifier
+        (32-bit number).  It is determined during the negotiation
+        phase.  A value of zero means that the remote control channel
+        identifier has not yet been learned."
+   ::= { lmpControlChannelEntry 5 }
+
+lmpCcRemoteAddressType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value represents the remote control channel IP address
+        type.  In point-to-point configuration, this value can be set
+        to unknown(0)."
+   ::= { lmpControlChannelEntry 6 }
+
+lmpCcRemoteIpAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value represents the remote control channel Internet
+        address for numbered control channel.  The type of this
+        address is determined by lmpCcRemoteAddressType.
+        The control channel must be numbered on non-point-to-point
+        configuration.  For point-to-point configuration, the
+        remote control channel address can be of type unknown,
+        in which case this object must be a zero-length string.  The
+        lmpCcRemoteId object then identifies the unnumbered
+        address."
+   ::= { lmpControlChannelEntry 7 }
+
+lmpCcSetupRole OBJECT-TYPE
+   SYNTAX        INTEGER { active(1), passive(2) }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The role that this node should take during establishment
+        of this control channel.  An active node will initiate
+        establishment.  A passive node will wait for the remote node
+        to initiate.  A pair of nodes that both take the passive role
+        will never establish communications."
+   DEFVAL        { active }
+   ::= { lmpControlChannelEntry 8 }
+
+lmpCcAuthentication OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object indicates whether the control channel must use
+        authentication."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpControlChannelEntry 9 }
+
+lmpCcHelloInterval OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the value of the HelloInterval
+        parameter.  The default value for this object should be
+        set to lmpCcHelloIntervalDefault."
+   ::= { lmpControlChannelEntry 10 }
+
+lmpCcHelloIntervalMin OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the minimum value for the
+        HelloInterval parameter.  The default value for this
+        object should be set to lmpCcHelloIntervalMinDefault."
+   ::= { lmpControlChannelEntry 11 }
+
+lmpCcHelloIntervalMax OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the maximum value for the
+        HelloInterval parameter.  The default value for this
+        object should be set to lmpCcHelloIntervalMaxDefault."
+   ::= { lmpControlChannelEntry 12 }
+
+lmpCcHelloIntervalNegotiated OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Once the control channel is active, this object represents
+        the negotiated HelloInterval value."
+   ::= { lmpControlChannelEntry 13 }
+
+lmpCcHelloDeadInterval OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the value of the HelloDeadInterval
+        parameter.  The default value for this object should be
+        set to lmpCcHelloDeadIntervalDefault."
+   ::= { lmpControlChannelEntry 14 }
+
+lmpCcHelloDeadIntervalMin OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the minimum value for the
+        HelloDeadInterval parameter.  The default value for this
+        object should be set to lmpCcHelloDeadIntervalMinDefault."
+   ::= { lmpControlChannelEntry 15 }
+
+lmpCcHelloDeadIntervalMax OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the maximum value for the
+        HelloDeadInterval parameter.  The default value for this
+        object should be set to lmpCcHelloIntervalMaxDefault."
+   ::= { lmpControlChannelEntry 16 }
+
+lmpCcHelloDeadIntervalNegotiated OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Once the control channel is active, this object represents
+        the negotiated HelloDeadInterval value."
+   ::= { lmpControlChannelEntry 17 }
+
+lmpCcLastChange OBJECT-TYPE
+   SYNTAX       TimeTicks
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+       "The value of sysUpTime at the time the control channel entered
+        its current operational state.  If the current state was
+        entered prior to the last re-initialization of the local
+        network management subsystem, then this object contains a
+        zero value."
+   ::= { lmpControlChannelEntry 18 }
+
+lmpCcAdminStatus OBJECT-TYPE
+   SYNTAX        INTEGER { up(1), down(2) }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The desired operational status of this control channel."
+   ::= { lmpControlChannelEntry 19 }
+
+lmpCcOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER {
+                     up(1),
+                     down(2),
+                     configSnd(3),
+                     configRcv(4),
+                     active(5),
+                     goingDown(6)
+                 }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of this control channel."
+   ::= { lmpControlChannelEntry 20 }
+
+lmpCcRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  None of the writable objects
+        in a row can be changed if the status is active(1).
+        All read-create objects must have valid and consistent
+        values before the row can be activated."
+   ::= { lmpControlChannelEntry 21 }
+
+lmpCcStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        lmpControlChannelTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   DEFVAL        { nonVolatile }
+   ::= { lmpControlChannelEntry 22 }
+
+-- End of lmpControlChannelTable
+
+-- LMP Control Channel Performance Table
+
+lmpControlChannelPerfTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpControlChannelPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies LMP control channel performance
+        counters."
+   ::= { lmpObjects 11 }
+
+lmpControlChannelPerfEntry OBJECT-TYPE
+   SYNTAX        LmpControlChannelPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by a LMP-enabled device for
+        every control channel.  lmpCcCounterDiscontinuityTime is used
+        to indicate potential discontinuity for all counter objects
+        in this table."
+   INDEX         { lmpCcId }
+   ::= { lmpControlChannelPerfTable 1 }
+
+LmpControlChannelPerfEntry ::= SEQUENCE {
+  lmpCcInOctets                    Counter32,
+  lmpCcInDiscards                  Counter32,
+  lmpCcInErrors                    Counter32,
+  lmpCcOutOctets                   Counter32,
+  lmpCcOutDiscards                 Counter32,
+  lmpCcOutErrors                   Counter32,
+  lmpCcConfigReceived              Counter32,
+  lmpCcConfigSent                  Counter32,
+  lmpCcConfigRetransmit            Counter32,
+  lmpCcConfigAckReceived           Counter32,
+  lmpCcConfigAckSent               Counter32,
+  lmpCcConfigNackReceived          Counter32,
+  lmpCcConfigNackSent              Counter32,
+  lmpCcHelloReceived               Counter32,
+  lmpCcHelloSent                   Counter32,
+  lmpCcBeginVerifyReceived         Counter32,
+  lmpCcBeginVerifySent             Counter32,
+  lmpCcBeginVerifyRetransmit       Counter32,
+  lmpCcBeginVerifyAckReceived      Counter32,
+  lmpCcBeginVerifyAckSent          Counter32,
+  lmpCcBeginVerifyNackReceived     Counter32,
+  lmpCcBeginVerifyNackSent         Counter32,
+  lmpCcEndVerifyReceived           Counter32,
+  lmpCcEndVerifySent               Counter32,
+  lmpCcEndVerifyRetransmit         Counter32,
+  lmpCcEndVerifyAckReceived        Counter32,
+  lmpCcEndVerifyAckSent            Counter32,
+  lmpCcTestStatusSuccessReceived   Counter32,
+  lmpCcTestStatusSuccessSent       Counter32,
+  lmpCcTestStatusSuccessRetransmit Counter32,
+  lmpCcTestStatusFailureReceived   Counter32,
+  lmpCcTestStatusFailureSent       Counter32,
+  lmpCcTestStatusFailureRetransmit Counter32,
+  lmpCcTestStatusAckReceived       Counter32,
+  lmpCcTestStatusAckSent           Counter32,
+  lmpCcLinkSummaryReceived         Counter32,
+  lmpCcLinkSummarySent             Counter32,
+  lmpCcLinkSummaryRetransmit       Counter32,
+  lmpCcLinkSummaryAckReceived      Counter32,
+  lmpCcLinkSummaryAckSent          Counter32,
+  lmpCcLinkSummaryNackReceived     Counter32,
+  lmpCcLinkSummaryNackSent         Counter32,
+  lmpCcChannelStatusReceived       Counter32,
+  lmpCcChannelStatusSent           Counter32,
+  lmpCcChannelStatusRetransmit     Counter32,
+  lmpCcChannelStatusAckReceived    Counter32,
+  lmpCcChannelStatusAckSent        Counter32,
+  lmpCcChannelStatusReqReceived    Counter32,
+  lmpCcChannelStatusReqSent        Counter32,
+  lmpCcChannelStatusReqRetransmit  Counter32,
+  lmpCcChannelStatusRspReceived    Counter32,
+  lmpCcChannelStatusRspSent        Counter32,
+  lmpCcCounterDiscontinuityTime    TimeStamp
+}
+
+lmpCcInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of LMP message octets received on the
+             control channel."
+    ::= { lmpControlChannelPerfEntry 1 }
+
+lmpCcInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of inbound packets that were chosen to be
+             discarded even though no errors had been detected.  One
+             possible reason for discarding such a packet could be to
+             free up buffer space."
+    ::= { lmpControlChannelPerfEntry 2 }
+
+lmpCcInErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of inbound packets that contained errors
+             preventing them from being processed by LMP."
+    ::= { lmpControlChannelPerfEntry 3 }
+
+lmpCcOutOctets OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of LMP message octets transmitted out of
+             the control channel."
+    ::= { lmpControlChannelPerfEntry 4 }
+
+lmpCcOutDiscards OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of outbound packets that were chosen to be
+             discarded even though no errors had been detected to
+             prevent their being transmitted.  One possible reason
+             for discarding such a packet could be to free up buffer
+             space."
+    ::= { lmpControlChannelPerfEntry 5 }
+
+lmpCcOutErrors OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of outbound packets that could not be
+             transmitted because of errors."
+    ::= { lmpControlChannelPerfEntry 6 }
+
+lmpCcConfigReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Config messages that have
+        been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 7 }
+
+lmpCcConfigSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Config messages that have
+        been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 8 }
+
+lmpCcConfigRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Config messages that
+        have been retransmitted over this control channel."
+   ::= { lmpControlChannelPerfEntry 9 }
+
+lmpCcConfigAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ConfigAck messages that have
+        been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 10 }
+
+lmpCcConfigAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ConfigAck messages that have
+        been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 11 }
+
+lmpCcConfigNackReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ConfigNack messages that have
+        been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 12 }
+
+lmpCcConfigNackSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ConfigNack messages that have
+        been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 13 }
+
+lmpCcHelloReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Hello messages that have
+        been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 14 }
+
+lmpCcHelloSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Hello messages that have
+        been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 15 }
+
+lmpCcBeginVerifyReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerify messages that have
+        been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 16 }
+
+lmpCcBeginVerifySent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerify messages that have
+        been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 17 }
+
+lmpCcBeginVerifyRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerify messages that
+        have been retransmitted over this control channel."
+   ::= { lmpControlChannelPerfEntry 18 }
+
+lmpCcBeginVerifyAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyAck messages that
+        have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 19 }
+
+lmpCcBeginVerifyAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyAck messages that
+        have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 20 }
+
+lmpCcBeginVerifyNackReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyNack messages that
+        have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 21 }
+
+lmpCcBeginVerifyNackSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyNack messages that
+        have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 22 }
+
+lmpCcEndVerifyReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerify messages that have
+        been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 23 }
+
+lmpCcEndVerifySent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerify messages that have
+        been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 24 }
+
+lmpCcEndVerifyRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerify messages that
+        have been retransmitted over this control channel."
+   ::= { lmpControlChannelPerfEntry 25 }
+
+lmpCcEndVerifyAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerifyAck messages that
+        have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 26 }
+
+lmpCcEndVerifyAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerifyAck messages that
+        have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 27 }
+
+lmpCcTestStatusSuccessReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusSuccess messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 28 }
+
+lmpCcTestStatusSuccessSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusSuccess messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 29 }
+
+lmpCcTestStatusSuccessRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusSuccess messages
+        that have been retransmitted over this control channel."
+   ::= { lmpControlChannelPerfEntry 30 }
+
+lmpCcTestStatusFailureReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusFailure messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 31 }
+
+lmpCcTestStatusFailureSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusFailure messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 32 }
+
+lmpCcTestStatusFailureRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusFailure messages
+        that have been retransmitted over this control channel."
+   ::= { lmpControlChannelPerfEntry 33 }
+
+lmpCcTestStatusAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusAck messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 34 }
+
+lmpCcTestStatusAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusAck messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 35 }
+
+lmpCcLinkSummaryReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummary messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 36 }
+
+lmpCcLinkSummarySent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummary messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 37 }
+
+lmpCcLinkSummaryRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummary messages that
+        have been retransmitted over this control channel."
+   ::= { lmpControlChannelPerfEntry 38 }
+
+lmpCcLinkSummaryAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryAck messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 39 }
+
+lmpCcLinkSummaryAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryAck messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 40 }
+
+lmpCcLinkSummaryNackReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryNack messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 41 }
+
+lmpCcLinkSummaryNackSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryNack messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 42 }
+
+lmpCcChannelStatusReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 43 }
+
+lmpCcChannelStatusSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 44 }
+
+lmpCcChannelStatusRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages
+        that have been retransmitted on this control channel."
+   ::= { lmpControlChannelPerfEntry 45 }
+
+lmpCcChannelStatusAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusAck messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 46 }
+
+lmpCcChannelStatusAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 47 }
+
+lmpCcChannelStatusReqReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusRequest messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 48 }
+
+lmpCcChannelStatusReqSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusRequest messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 49 }
+
+lmpCcChannelStatusReqRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusRequest messages
+        that have been retransmitted on this control channel."
+   ::= { lmpControlChannelPerfEntry 50 }
+
+lmpCcChannelStatusRspReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusResponse messages
+        that have been received on this control channel."
+   ::= { lmpControlChannelPerfEntry 51 }
+
+lmpCcChannelStatusRspSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusResponse messages
+        that have been sent on this control channel."
+   ::= { lmpControlChannelPerfEntry 52 }
+
+lmpCcCounterDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at which
+         one or more of this control channel's counters suffered a
+         discontinuity.  The relevant counters are the specific
+         instances associated with this control channel of any
+         Counter32 object contained in the lmpControlChannelPerfTable.
+         If no such discontinuities have occurred since the last re-
+         initialization of the local management subsystem, then this
+         object contains a zero value."
+    ::= { lmpControlChannelPerfEntry 53 }
+
+-- End of lmpControlChannelPerfTable
+
+-- LMP TE Link Table
+
+lmpTeLinkTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpTeLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the LMP-specific TE link information.
+        Overall TE link information is kept in three separate tables:
+        ifTable for interface-specific information, lmpTeLinkTable
+        for LMP specific information, and teLinkTable for generic
+        TE link information.  ifIndex is the common index to all
+        tables."
+   ::= { lmpObjects 12 }
+
+lmpTeLinkEntry OBJECT-TYPE
+   SYNTAX        LmpTeLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table exists for each ifEntry with an
+        ifType of teLink(200) that is managed by LMP.  An ifEntry with
+        an ifIndex must exist before the corresponding lmpTeLinkEntry is
+        created.  If a TE link entry in the ifTable is destroyed, then
+        so is the corresponding entry in the lmpTeLinkTable.  The
+        administrative status value is controlled from the ifEntry.
+        Setting the administrative status to testing prompts LMP to
+        start link verification on the TE link.  Information about the
+        TE link that is not LMP specific is contained in the
+        teLinkTable of the TE-LINK-STD-MIB MIB module."
+   INDEX         { ifIndex }
+   ::= { lmpTeLinkTable 1 }
+
+LmpTeLinkEntry ::= SEQUENCE {
+  lmpTeLinkNbrRemoteNodeId  LmpNodeId,
+  lmpTeLinkVerification     TruthValue,
+  lmpTeLinkFaultManagement  TruthValue,
+  lmpTeLinkDwdm             TruthValue,
+  lmpTeLinkOperStatus       INTEGER,
+  lmpTeLinkRowStatus        RowStatus,
+  lmpTeLinkStorageType      StorageType
+}
+
+lmpTeLinkNbrRemoteNodeId OBJECT-TYPE
+   SYNTAX        LmpNodeId
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the Node ID of the TE link remote node.  This value
+        may be learned during the control channel parameter negotiation
+
+        phase (in the Config message).  Node ID is an address whose
+        type must be IPv4."
+   ::= { lmpTeLinkEntry 1 }
+
+lmpTeLinkVerification OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object indicates whether the LMP link verification
+        procedure is enabled for this TE link."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpTeLinkEntry 2 }
+
+lmpTeLinkFaultManagement OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object indicates whether the LMP fault management procedure
+        is enabled on this TE link."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpTeLinkEntry 3 }
+
+lmpTeLinkDwdm OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object indicates whether the LMP DWDM procedure is enabled
+        on this TE link."
+   REFERENCE
+       "Link Management Protocol (LMP) for Dense Wavelength Division
+        Multiplexing (DWDM) Optical Line Systems, RFC 4209."
+   ::= { lmpTeLinkEntry 4 }
+
+lmpTeLinkOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER {
+                   up(1), down(2), testing(3), init(4), degraded(5)
+                 }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of this TE link.  The status
+        is set to testing when the TE link is performing link
+        verification.  A degraded state indicates that there is
+
+        no active control channel between the pair of nodes that
+        form the endpoints of the TE link, but that at least one
+        data-bearing link on the TE link is allocated."
+   ::= { lmpTeLinkEntry 5 }
+
+lmpTeLinkRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  None of the writable objects
+        in a row can be changed if the status is active(1).
+        All read-create objects must have valid and consistent
+        values before the row can be activated."
+   ::= { lmpTeLinkEntry 6 }
+
+lmpTeLinkStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        lmpTeLinkTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   DEFVAL        { nonVolatile }
+   ::= { lmpTeLinkEntry 7 }
+
+-- End of lmpTeLinkTable
+
+lmpGlobalLinkVerificationInterval OBJECT-TYPE
+   SYNTAX        Unsigned32
+   UNITS         "milliseconds"
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object indicates how often the link verification
+        procedure is executed.  The interval is in milliseconds.
+        A value of 0 is used to indicate that the link
+        verification procedure should not be executed.  The
+        interval specified in this object should be large enough
+        to allow the verification procedure to be completed
+        before the start of the next interval.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   ::= { lmpObjects 13 }
+
+-- LMP Link Verification Table
+
+lmpLinkVerificationTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpLinkVerificationEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies TE link information associated with the
+        LMP verification procedure."
+   ::= { lmpObjects 14 }
+
+lmpLinkVerificationEntry OBJECT-TYPE
+   SYNTAX        LmpLinkVerificationEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LMP-enabled device for
+        every TE link that supports the LMP verification
+        procedure."
+   INDEX         { ifIndex }
+   ::= { lmpLinkVerificationTable 1 }
+
+LmpLinkVerificationEntry ::= SEQUENCE {
+  lmpLinkVerifyInterval           LmpInterval,
+  lmpLinkVerifyDeadInterval       LmpInterval,
+  lmpLinkVerifyTransportMechanism BITS,
+  lmpLinkVerifyAllLinks           TruthValue,
+  lmpLinkVerifyTransmissionRate   Unsigned32,
+  lmpLinkVerifyWavelength         Unsigned32,
+  lmpLinkVerifyRowStatus          RowStatus,
+  lmpLinkVerifyStorageType        StorageType
+}
+
+lmpLinkVerifyInterval OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the VerifyInterval parameter used
+        in the LMP link verification process.  It indicates the
+        interval at which the Test messages are sent."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpLinkVerificationEntry 1 }
+
+lmpLinkVerifyDeadInterval OBJECT-TYPE
+   SYNTAX        LmpInterval
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the VerifyDeadInterval parameter used
+        in the verification of the physical connectivity of data-
+        bearing links.  It specifies the observation period used to
+        detect a Test message at the remote node."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpLinkVerificationEntry 2 }
+
+lmpLinkVerifyTransportMechanism OBJECT-TYPE
+   SYNTAX        BITS {
+                     -- All encoding types:
+                     payload(0),
+                     -- SONET/SDH encoding type:
+                     dccSectionOverheadBytes(1),
+                     dccLineOverheadBytes(2),
+                     j0Trace(3),
+                     j1Trace(4),
+                     j2Trace(5)
+                 }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This defines the transport mechanism for the Test messages.  The
+        scope of this bit mask is restricted to each link encoding
+        type.  The local node will set the bits corresponding to the
+        various mechanisms it can support for transmitting LMP Test
+        messages.  The receiver chooses the appropriate mechanism in the
+        BeginVerifyAck message."
+   REFERENCE
+       "Link Management Protocol, RFC 4204
+        Synchronous Optical Network (SONET)/Synchronous Digital
+        Hierarchy (SDH) Encoding for Link Management Protocol (LMP)
+        Test Messages, RFC 4207."
+   ::= { lmpLinkVerificationEntry 3 }
+
+lmpLinkVerifyAllLinks OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "A value of true(1) for this object indicates that the
+        verification process checks all unallocated links; otherwise,
+        only the new ports or component links that have been added to
+        this TE link are verified."
+   ::= { lmpLinkVerificationEntry 4 }
+
+lmpLinkVerifyTransmissionRate OBJECT-TYPE
+   SYNTAX        Unsigned32
+   UNITS         "bytes per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the transmission rate of the data link over which
+        the Test messages will be transmitted and is expressed in
+        bytes per second."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpLinkVerificationEntry 5 }
+
+lmpLinkVerifyWavelength OBJECT-TYPE
+   SYNTAX        Unsigned32
+   UNITS         "nanometers"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value corresponds to the wavelength at
+        which the Test messages will be transmitted and is
+        measured in nanometers (nm).  If each data-bearing link
+        corresponds to a separate wavelength, then this value should
+        be set to 0."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpLinkVerificationEntry 6 }
+
+lmpLinkVerifyRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  None of the writable objects
+        in a row can be changed if the status is active(1).
+        All read-create objects must have valid and consistent
+        values before the row can be activated."
+   ::= { lmpLinkVerificationEntry 7 }
+
+lmpLinkVerifyStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        lmpLinkVerificationTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+
+        columnar object in the row."
+   DEFVAL        { nonVolatile }
+   ::= { lmpLinkVerificationEntry 8 }
+
+-- End of lmpLinkVerificationTable
+
+-- LMP TE Link Performance Table
+
+lmpTeLinkPerfTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpTeLinkPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies LMP TE link performance counters."
+   ::= { lmpObjects 15 }
+
+lmpTeLinkPerfEntry OBJECT-TYPE
+   SYNTAX        LmpTeLinkPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LMP-enabled device for
+        every TE link.  lmpTeCounterDiscontinuityTime is used
+        to indicate potential discontinuity for all counter objects
+        in this table."
+   INDEX         { ifIndex }
+   ::= { lmpTeLinkPerfTable 1 }
+
+LmpTeLinkPerfEntry ::= SEQUENCE {
+  lmpTeInOctets                    Counter32,
+  lmpTeOutOctets                   Counter32,
+  lmpTeBeginVerifyReceived         Counter32,
+  lmpTeBeginVerifySent             Counter32,
+  lmpTeBeginVerifyRetransmit       Counter32,
+  lmpTeBeginVerifyAckReceived      Counter32,
+  lmpTeBeginVerifyAckSent          Counter32,
+  lmpTeBeginVerifyNackReceived     Counter32,
+  lmpTeBeginVerifyNackSent         Counter32,
+  lmpTeEndVerifyReceived           Counter32,
+  lmpTeEndVerifySent               Counter32,
+  lmpTeEndVerifyRetransmit         Counter32,
+  lmpTeEndVerifyAckReceived        Counter32,
+  lmpTeEndVerifyAckSent            Counter32,
+  lmpTeTestStatusSuccessReceived   Counter32,
+  lmpTeTestStatusSuccessSent       Counter32,
+  lmpTeTestStatusSuccessRetransmit Counter32,
+  lmpTeTestStatusFailureReceived   Counter32,
+  lmpTeTestStatusFailureSent       Counter32,
+  lmpTeTestStatusFailureRetransmit Counter32,
+  lmpTeTestStatusAckReceived       Counter32,
+  lmpTeTestStatusAckSent           Counter32,
+  lmpTeLinkSummaryReceived         Counter32,
+  lmpTeLinkSummarySent             Counter32,
+  lmpTeLinkSummaryRetransmit       Counter32,
+  lmpTeLinkSummaryAckReceived      Counter32,
+  lmpTeLinkSummaryAckSent          Counter32,
+  lmpTeLinkSummaryNackReceived     Counter32,
+  lmpTeLinkSummaryNackSent         Counter32,
+  lmpTeChannelStatusReceived       Counter32,
+  lmpTeChannelStatusSent           Counter32,
+  lmpTeChannelStatusRetransmit     Counter32,
+  lmpTeChannelStatusAckReceived    Counter32,
+  lmpTeChannelStatusAckSent        Counter32,
+  lmpTeChannelStatusReqReceived    Counter32,
+  lmpTeChannelStatusReqSent        Counter32,
+  lmpTeChannelStatusReqRetransmit  Counter32,
+  lmpTeChannelStatusRspReceived    Counter32,
+  lmpTeChannelStatusRspSent        Counter32,
+  lmpTeCounterDiscontinuityTime    TimeStamp
+}
+
+lmpTeInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of LMP message octets received for
+             this TE link."
+    ::= { lmpTeLinkPerfEntry 1 }
+
+lmpTeOutOctets OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of LMP message octets transmitted out
+             for this TE link."
+    ::= { lmpTeLinkPerfEntry 2 }
+
+lmpTeBeginVerifyReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerify messages that have
+
+        been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 3 }
+
+lmpTeBeginVerifySent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerify messages that have
+        been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 4 }
+
+lmpTeBeginVerifyRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerify messages that
+        have been retransmitted for this TE link."
+   ::= { lmpTeLinkPerfEntry 5 }
+
+lmpTeBeginVerifyAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyAck messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 6 }
+
+lmpTeBeginVerifyAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyAck messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 7 }
+
+lmpTeBeginVerifyNackReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyNack messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 8 }
+
+lmpTeBeginVerifyNackSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of BeginVerifyNack messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 9 }
+
+lmpTeEndVerifyReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerify messages that have
+        been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 10 }
+
+lmpTeEndVerifySent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerify messages that have
+        been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 11 }
+
+lmpTeEndVerifyRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerify messages that
+        have been retransmitted over this control channel."
+   ::= { lmpTeLinkPerfEntry 12 }
+
+lmpTeEndVerifyAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerifyAck messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 13 }
+
+lmpTeEndVerifyAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of EndVerifyAck messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 14 }
+
+lmpTeTestStatusSuccessReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusSuccess messages
+        that have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 15 }
+
+lmpTeTestStatusSuccessSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusSuccess messages
+        that have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 16 }
+
+lmpTeTestStatusSuccessRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusSuccess messages
+        that have been retransmitted for this TE link."
+   ::= { lmpTeLinkPerfEntry 17 }
+
+lmpTeTestStatusFailureReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusFailure messages
+        that have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 18 }
+
+lmpTeTestStatusFailureSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusFailure messages
+
+        that have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 19 }
+
+lmpTeTestStatusFailureRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusFailure messages
+        that have been retransmitted on this TE link."
+   ::= { lmpTeLinkPerfEntry 20 }
+
+lmpTeTestStatusAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusAck messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 21 }
+
+lmpTeTestStatusAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of TestStatusAck messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 22 }
+
+lmpTeLinkSummaryReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummary messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 23 }
+
+lmpTeLinkSummarySent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummary messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 24 }
+
+lmpTeLinkSummaryRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummary messages that
+        have been retransmitted over this control channel."
+   ::= { lmpTeLinkPerfEntry 25 }
+
+lmpTeLinkSummaryAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryAck messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 26 }
+
+lmpTeLinkSummaryAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryAck messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 27 }
+
+lmpTeLinkSummaryNackReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryNack messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 28 }
+
+lmpTeLinkSummaryNackSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of LinkSummaryNack messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 29 }
+
+lmpTeChannelStatusReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages that
+        have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 30 }
+
+lmpTeChannelStatusSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages that
+        have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 31 }
+
+lmpTeChannelStatusRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages that
+        have been retransmitted for this TE link."
+   ::= { lmpTeLinkPerfEntry 32 }
+
+lmpTeChannelStatusAckReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusAck messages
+        that have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 33 }
+
+lmpTeChannelStatusAckSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatus messages
+        that have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 34 }
+
+lmpTeChannelStatusReqReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusRequest messages
+
+        that have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 35 }
+
+lmpTeChannelStatusReqSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusRequest messages
+        that have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 36 }
+
+lmpTeChannelStatusReqRetransmit OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusRequest messages
+        that have been retransmitted for this TE link."
+   ::= { lmpTeLinkPerfEntry 37 }
+
+lmpTeChannelStatusRspReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusResponse messages
+        that have been received for this TE link."
+   ::= { lmpTeLinkPerfEntry 38 }
+
+lmpTeChannelStatusRspSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of ChannelStatusResponse messages
+        that have been sent for this TE link."
+   ::= { lmpTeLinkPerfEntry 39 }
+
+lmpTeCounterDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at which
+         one or more of this TE link's counters suffered a
+         discontinuity.  The relevant counters are the specific
+         instances associated with this TE link of any Counter32
+
+         object contained in the lmpTeLinkPerfTable.  If
+         no such discontinuities have occurred since the last re-
+         initialization of the local management subsystem, then this
+         object contains a zero value."
+    ::= { lmpTeLinkPerfEntry 40 }
+
+-- End of lmpTeLinkPerfTable
+
+-- LMP Data Link Table
+
+lmpDataLinkTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpDataLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the data-bearing links managed by the
+        LMP."
+   ::= { lmpObjects 16 }
+
+lmpDataLinkEntry OBJECT-TYPE
+   SYNTAX        LmpDataLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table exists for each ifEntry that represents
+        a data-bearing link.  An ifEntry with an ifIndex must exist
+        before the corresponding lmpDataLinkEntry is created.
+        If an entry representing the data-bearing link is destroyed in
+        the ifTable, then so is the corresponding entry in the
+        lmpDataLinkTable.  The administrative status value is
+        controlled from the ifEntry.  The index to this table is also
+        used to get information in the componentLinkTable
+        of the TE-LINK-STD-MIB MIB module."
+   INDEX         { ifIndex }
+   ::= { lmpDataLinkTable 1 }
+
+LmpDataLinkEntry ::= SEQUENCE {
+  lmpDataLinkType               INTEGER,
+  lmpDataLinkAddressType        InetAddressType,
+  lmpDataLinkIpAddr             InetAddress,
+  lmpDataLinkRemoteIpAddress    InetAddress,
+  lmpDataLinkRemoteIfId         InterfaceIndexOrZero,
+  lmpDataLinkEncodingType       TeLinkEncodingType,
+  lmpDataLinkActiveOperStatus   INTEGER,
+  lmpDataLinkPassiveOperStatus  INTEGER,
+  lmpDataLinkRowStatus          RowStatus,
+  lmpDataLinkStorageType        StorageType
+
+}
+
+lmpDataLinkType OBJECT-TYPE
+   SYNTAX        INTEGER {
+                     port(1),
+                     componentLink(2)
+                 }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies whether this data-bearing link is
+        a port or a component link.  Component links are multiplex
+        capable, whereas ports are not multiplex capable."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpDataLinkEntry 1 }
+
+lmpDataLinkAddressType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the data-bearing link IP address
+        type.  If the data-bearing link is unnumbered, the address
+        type must be set to unknown(0)."
+   ::= { lmpDataLinkEntry 2 }
+
+lmpDataLinkIpAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The local Internet address for numbered links.  The type
+        of this address is determined by the value of
+        lmpDataLinkAddressType object.
+
+        For IPv4 and IPv6 numbered links, this object represents
+        the local IP address associated with the data-bearing
+        link.  For an unnumbered link, the local address is
+        of type unknown, and this object is set to the zero-length
+        string; the ifIndex object then identifies the
+        unnumbered address."
+   ::= { lmpDataLinkEntry 3 }
+
+lmpDataLinkRemoteIpAddress OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The remote Internet address for numbered data-bearing links.
+        The type of this address is determined by the
+        lmpDataLinkAddressType object.
+
+        For IPv4 and IPv6 numbered links, this object represents the
+        remote IP address associated with the data-bearing link.  For
+        an unnumbered link, the remote address is of type unknown,
+        and this object is set to the zero-length string; the
+        lmpDataLinkRemoteIfId object then identifies the unnumbered
+        address.
+
+        This information is either configured manually or
+        communicated by the remote node during the link verification
+        procedure."
+   ::= { lmpDataLinkEntry 4 }
+
+lmpDataLinkRemoteIfId OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Interface identifier of the remote end point.  This
+        information is either configured manually or
+        communicated by the remote node during the link verification
+        procedure."
+   ::= { lmpDataLinkEntry 5 }
+
+lmpDataLinkEncodingType OBJECT-TYPE
+   SYNTAX        TeLinkEncodingType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The encoding type of the data-bearing link."
+   REFERENCE
+       "Generalized MPLS Signaling Functional Description, RFC 3471."
+   ::= { lmpDataLinkEntry 6 }
+
+lmpDataLinkActiveOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER {
+                     upAlloc(1),
+                     upFree(2),
+                     down(3),
+                     testing(4) }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of this data-bearing link
+
+        (active FSM)."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpDataLinkEntry 7 }
+
+lmpDataLinkPassiveOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER {
+                     upAlloc(1),
+                     upFree(2),
+                     down(3),
+                     psvTst(4) }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of this data-bearing link
+        (passive FSM)."
+   REFERENCE
+       "Link Management Protocol, RFC 4204."
+   ::= { lmpDataLinkEntry 8 }
+
+lmpDataLinkRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  None of the writable objects
+        in a row can be changed if the status is active(1).
+        All read-create objects must have valid and consistent
+        values before the row can be activated."
+   ::= { lmpDataLinkEntry 9 }
+
+lmpDataLinkStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        lmpDataLinkTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   DEFVAL        { nonVolatile }
+   ::= { lmpDataLinkEntry 10 }
+
+-- End of lmpDataLinkTable
+
+-- LMP Data Link Performance Table
+
+lmpDataLinkPerfTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF LmpDataLinkPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the data-bearing links LMP performance
+        counters."
+   ::= { lmpObjects 17 }
+
+lmpDataLinkPerfEntry OBJECT-TYPE
+   SYNTAX        LmpDataLinkPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table contains information about
+        the LMP performance counters for the data-bearing links.
+        lmpDataLinkDiscontinuityTime is used to indicate potential
+        discontinuity for all counter objects in this table."
+   INDEX         { ifIndex }
+   ::= { lmpDataLinkPerfTable 1 }
+
+LmpDataLinkPerfEntry ::= SEQUENCE {
+  lmpDataLinkTestReceived        Counter32,
+  lmpDataLinkTestSent            Counter32,
+  lmpDataLinkActiveTestSuccess   Counter32,
+  lmpDataLinkActiveTestFailure   Counter32,
+  lmpDataLinkPassiveTestSuccess  Counter32,
+  lmpDataLinkPassiveTestFailure  Counter32,
+  lmpDataLinkDiscontinuityTime   TimeStamp
+}
+
+lmpDataLinkTestReceived OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Test messages that have
+        been received on this data-bearing link."
+   ::= { lmpDataLinkPerfEntry 1 }
+
+lmpDataLinkTestSent OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of Test messages that have
+        been sent on this data-bearing link."
+   ::= { lmpDataLinkPerfEntry 2 }
+
+lmpDataLinkActiveTestSuccess OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of data-bearing link tests
+        that were successful on the active side of this data-
+        bearing link."
+   ::= { lmpDataLinkPerfEntry 3 }
+
+lmpDataLinkActiveTestFailure OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of data-bearing link tests
+        that failed on the active side of this data-bearing link."
+   ::= { lmpDataLinkPerfEntry 4 }
+
+lmpDataLinkPassiveTestSuccess OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of data-bearing link tests
+        that were successful on the passive side of this data-
+        bearing link."
+   ::= { lmpDataLinkPerfEntry 5 }
+
+lmpDataLinkPassiveTestFailure OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of data-bearing link tests
+        that failed on the passive side of this data-bearing link."
+   ::= { lmpDataLinkPerfEntry 6 }
+
+lmpDataLinkDiscontinuityTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at which
+         one or more of this data-bearing link's counters suffered
+         a discontinuity.  The relevant counters are the specific
+         instances associated with this data-bearing link of any
+         Counter32 object contained in the lmpDataLinkPerfTable.  If
+
+         no such discontinuities have occurred since the last re-
+         initialization of the local management subsystem, then this
+         object contains a zero value."
+    ::= { lmpDataLinkPerfEntry 7 }
+
+-- End of lmpDataLinkPerfTable
+
+-- Notification Configuration
+
+lmpNotificationMaxRate OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-write
+   STATUS       current
+   DESCRIPTION
+       "The LMP notification rate depends on the size of the network,
+        the type of links, the network configuration, the
+        reliability of the network, etc.
+
+        When this MIB was designed, care was taken to minimize the
+        amount of notifications generated for LMP purposes.  Wherever
+        possible, notifications are state driven, meaning that the
+        notifications are sent only when the system changes state.
+        The only notifications that are repeated and that could cause a
+        problem as far as congestion is concerned are the ones
+        associated with data link verification.
+        Without any considerations to handling of these
+        notifications, a problem may arise if the number of data
+        links is high.  Since the data link verification notifications
+        can happen only once per data link per link verification
+        interval, the notification rate should be sustainable if one
+        chooses an appropriate link verification interval for a given
+        network configuration.  For instance, a network of 100 nodes
+        with 5 links of 128 wavelengths each and a link verification
+        of 1 minute, where no more than 10% of the links failed at any
+        given time, would have 1 notification per second sent from
+        each node, or 100 notifications per second for the whole
+        network.  The rest of the notifications are negligible
+        compared to this number.
+
+        To alleviate the congestion problem, the
+        lmpNotificationMaxRate object can be used to implement a
+        throttling mechanism.  It is also possible to enable/disable
+        certain type of notifications.
+
+        This variable indicates the maximum number of
+        notifications issued per minute.  If events occur
+        more rapidly, the implementation may simply fail to
+
+        emit these notifications during that period or may
+        queue them until an appropriate time.  A value of 0
+        means that no throttling is applied and events may be
+        notified at the rate at which they occur.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   ::= { lmpObjects 18 }
+
+lmpLinkPropertyNotificationsEnabled OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is true(1), then it enables the
+        generation of lmpTeLinkPropertyMismatch
+        and lmpDataLinkPropertyMismatch notifications;
+        otherwise, these notifications are not emitted.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   DEFVAL        { false }
+   ::= { lmpObjects 19 }
+
+lmpUnprotectedNotificationsEnabled OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is true(1), then it enables the
+        generation of lmpUnprotected notifications;
+        otherwise, these notifications are not emitted.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   DEFVAL        { false }
+   ::= { lmpObjects 20 }
+
+lmpCcUpDownNotificationsEnabled OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is true(1), then it enables the generation of
+        lmpControlChannelUp and lmpControlChannelDown notifications;
+        otherwise, these notifications are not emitted.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   DEFVAL        { false }
+   ::= { lmpObjects 21 }
+
+lmpTeLinkNotificationsEnabled OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is true(1), then it enables the
+        generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded
+        notifications; otherwise, these notifications are not emitted.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   DEFVAL        { false }
+   ::= { lmpObjects 22 }
+
+lmpDataLinkNotificationsEnabled OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is true(1), then it enables the
+        generation of lmpDataLinkVerificationFailure
+        notification; otherwise, these notifications are not emitted.
+        Implementations should save the value of this object in
+        persistent memory so that it survives restarts or reboot."
+   DEFVAL        { false }
+   ::= { lmpObjects 23 }
+
+-- Notifications
+
+-- Link Property Mismatch Notifications
+
+lmpTeLinkPropertyMismatch NOTIFICATION-TYPE
+   OBJECTS       { teLinkRemoteIpAddr,
+                   teLinkIncomingIfId }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a TE link property
+        mismatch is detected on the node.  The received remote TE link
+        ID of the misconfigured TE link is represented by either
+        teLinkRemoteIpAddr or teLinkIncomingIfId, depending on whether
+        the TE link is numbered or unnumbered.  This notification
+        should not be sent unless lmpLinkPropertyNotificationsEnabled
+        is true(1).  It is recommended that this notification be
+        reported only the first time a mismatch is detected.
+        Otherwise, for a given TE link, this notification can occur
+        no more than once per verification interval
+        (lmpGlobalLinkVerificationInterval)."
+   ::= { lmpNotifications 1 }
+
+lmpDataLinkPropertyMismatch NOTIFICATION-TYPE
+   OBJECTS       { lmpDataLinkType, lmpDataLinkRemoteIfId }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a data-bearing link
+        property mismatch is detected on the node.  lmpDataLinkType
+        is used to identify the local identifiers associated with
+        the data link.  (The data link interface index can be used
+        to determine the TE link interface index, as this
+        relationship is captured in the interface stack table.)
+        The remote entity interface ID is the remote entity
+        interface ID received in the LinkSummary message.
+        This notification should not be sent unless
+        lmpLinkPropertyNotificationsEnabled is true(1).  It is
+        recommended that this notification be reported only the
+        first time a mismatch is detected.  Otherwise, for a given
+        data link, this notification can occur no more than once
+        per verification interval (lmpGlobalLinkVerificationInterval)."
+   ::= { lmpNotifications 2 }
+
+-- Neighbor Notification
+
+lmpUnprotected NOTIFICATION-TYPE
+   OBJECTS       { lmpCcNbrNodeId }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when there is more than one
+        control channel between LMP neighbors and the last redundant
+        control channel has failed.  If the remaining operational
+        control channel fails, then there will be no more control
+        channels between the pair of nodes and all the TE links
+        between the pair of nodes, will go to degraded state.  This
+        notification should not be sent unless
+        lmpUnprotectedNotificationsEnabled is set to true(1)."
+   ::= { lmpNotifications 3 }
+
+-- Control Channel Notifications
+
+lmpControlChannelUp NOTIFICATION-TYPE
+   OBJECTS       { lmpCcAdminStatus, lmpCcOperStatus }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a control
+        channel transitions to the up operational state.  This
+        notification should not be sent unless
+        lmpCcUpDownNotificationsEnabled is true(1)."
+   ::= { lmpNotifications 4 }
+
+lmpControlChannelDown NOTIFICATION-TYPE
+   OBJECTS       { lmpCcAdminStatus, lmpCcOperStatus }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a control channel
+        transitions out of the up operational state.  This
+        notification should not be sent unless
+        lmpCcUpDownNotificationsEnabled is true(1)."
+   ::= { lmpNotifications 5 }
+
+-- TE Link Notification
+
+lmpTeLinkDegraded NOTIFICATION-TYPE
+   OBJECTS       { lmpTeLinkOperStatus }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a lmpTeLinkOperStatus
+        object for a TE link enters the degraded state.  This
+        notification should not be sent unless
+        lmpTeLinkNotificationsEnabled is true(1)."
+   ::= { lmpNotifications 6 }
+
+lmpTeLinkNotDegraded NOTIFICATION-TYPE
+   OBJECTS       { lmpTeLinkOperStatus }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a lmpTeLinkOperStatus
+        object for a TE link leaves the degraded state.  This
+        notification should not be sent unless
+        lmpTeLinkNotificationsEnabled is true(1)."
+   ::= { lmpNotifications 7 }
+
+-- Data-bearing Link Notification
+
+lmpDataLinkVerificationFailure NOTIFICATION-TYPE
+   OBJECTS       { lmpDataLinkActiveOperStatus,
+                   lmpDataLinkPassiveOperStatus }
+   STATUS        current
+   DESCRIPTION
+       "This notification is generated when a data-bearing
+        link verification fails.  This notification should not be sent
+        unless lmpDataLinkNotificationsEnabled is true(1).  For a given
+        data link, this notification can occur no more than once per
+        verification interval (lmpGlobalLinkVerificationInterval)."
+   ::= { lmpNotifications 8 }
+
+-- End of notifications
+
+-- Module compliance
+
+lmpCompliances
+   OBJECT IDENTIFIER ::= { lmpConformance 1 }
+
+lmpGroups
+   OBJECT IDENTIFIER ::= { lmpConformance 2 }
+
+lmpModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that support the
+        configuration and monitoring of LMP MIB."
+   MODULE -- this module
+
+      MANDATORY-GROUPS    { lmpNodeGroup,
+                            lmpControlChannelGroup,
+                            lmpLinkPropertyCorrelationGroup,
+                            lmpPerfGroup,
+                            lmpTeLinkGroup,
+                            lmpDataLinkGroup }
+
+      GROUP lmpCcIsNotInterfaceGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support
+           control channels that are not interfaces, in addition to
+           lmpControlChannelGroup.  The following constraint applies:
+           lmpCcIsIf must at least be read-only, returning false(2)."
+
+      GROUP lmpCcIsInterfaceGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support
+           control channels that are interfaces, in addition to
+           lmpControlChannelGroup.  The following constraint applies:
+           lmpCcIsIf must at least be read-only, returning true(1)."
+
+      GROUP lmpLinkVerificationGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support
+           the link verification procedure."
+
+      GROUP lmpNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      -- lmpNbrTable
+
+      OBJECT      lmpNbrRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- lmpControlChannelTable
+
+      OBJECT      lmpCcRemoteAddressType
+      SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2) }
+      DESCRIPTION
+          "Only ipv4(1) and ipv6(2) address types need to be
+           supported for non-point-to-point configurations."
+
+      OBJECT      lmpCcRemoteIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      DESCRIPTION
+          "The size of the IP address depends on the address type."
+
+      OBJECT      lmpCcRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      OBJECT      lmpCcOperStatus
+      SYNTAX      INTEGER { up(1), down(2) }
+      DESCRIPTION
+          "A value of configSnd(3), configRcv(4), active(5), or
+           goingDown(6) need not be supported."
+
+      -- lmpTeLinkTable
+
+      OBJECT      lmpTeLinkOperStatus
+      SYNTAX      INTEGER { up(1), down(2), degraded(5) }
+      DESCRIPTION
+          "The testing(3) and init(4) state need not be supported."
+
+      OBJECT      lmpTeLinkRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- lmpDataLinkTable
+
+      OBJECT      lmpDataLinkActiveOperStatus
+      SYNTAX      INTEGER { upAlloc(1), upFree(2), down(3) }
+      DESCRIPTION
+          "A value of testing(4) need not be supported."
+      OBJECT      lmpDataLinkPassiveOperStatus
+      SYNTAX      INTEGER { upAlloc(1), upFree(2), down(3) }
+      DESCRIPTION
+          "A value of psvTst(4) need not be supported."
+
+      OBJECT      lmpDataLinkRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+   ::= { lmpCompliances 1 }
+
+lmpModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that support the
+        monitoring of the LMP MIB."
+   MODULE -- this module
+
+      -- The mandatory groups have to be implemented
+      -- by all LMP-enabled devices.  However, they may all be supported
+      -- as read-only objects in the case where manual
+      -- configuration is not supported.
+
+      MANDATORY-GROUPS    { lmpNodeGroup,
+                            lmpControlChannelGroup,
+                            lmpLinkPropertyCorrelationGroup,
+                            lmpPerfGroup,
+                            lmpTeLinkGroup,
+                            lmpDataLinkGroup }
+
+      GROUP lmpCcIsNotInterfaceGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support
+           control channels that are not interfaces, in addition to
+           lmpControlChannelGroup.  The following constraint applies:
+           lmpCcIsIf must at least be read-only, returning false(2)."
+
+      GROUP lmpCcIsInterfaceGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support
+           control channels that are interfaces, in addition to
+           lmpControlChannelGroup.  The following constraint applies:
+           lmpCcIsIf must at least be read-only, returning true(1)."
+
+      GROUP lmpLinkVerificationGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support
+           the link verification procedure."
+
+      GROUP lmpNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      -- Scalars
+
+      OBJECT      lmpAdminStatus
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpGlobalLinkVerificationInterval
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloIntervalDefault
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloIntervalDefaultMin
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloIntervalDefaultMax
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloDeadIntervalDefault
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloDeadIntervalDefaultMin
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloDeadIntervalDefaultMax
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpNotificationMaxRate
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- lmpNbrTable
+
+      OBJECT      lmpNbrRetransmitInterval
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpNbrRetryLimit
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpNbrRetransmitDelta
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpNbrRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required, and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      lmpNbrStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- lmpControlChannelTable
+
+      OBJECT      lmpCcUnderlyingIfIndex
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcIsIf
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcNbrNodeId
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcRemoteAddressType
+      SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Only ipv4(1) and ipv6(2) address types need to be
+           supported for non-point-to-point configurations."
+
+      OBJECT      lmpCcRemoteIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "The size of the IP address depends on the address type."
+
+      OBJECT      lmpCcSetupRole
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcAuthentication
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloIntervalMin
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloIntervalMax
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloDeadIntervalMin
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcHelloDeadIntervalMax
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpCcRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required, and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      lmpCcOperStatus
+      SYNTAX      INTEGER { up(1), down(2) }
+      DESCRIPTION
+          "A value of configSnd(3), configRcv(4), active(5), or
+           goingDown(6) need not be supported."
+
+      OBJECT      lmpCcStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- lmpLinkVerificationTable
+
+      OBJECT      lmpLinkVerifyInterval
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpLinkVerifyDeadInterval
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpLinkVerifyAllLinks
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- lmpTeLinkTable
+
+      OBJECT      lmpTeLinkNbrRemoteNodeId
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required if the link verification
+
+           procedure is enabled."
+
+      OBJECT      lmpTeLinkVerification
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpTeLinkFaultManagement
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpTeLinkDwdm
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpTeLinkOperStatus
+      SYNTAX      INTEGER { up(1), down(2), degraded(5) }
+      DESCRIPTION
+          "The testing(3) and init(4) state need not be supported."
+
+      OBJECT      lmpTeLinkRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required, and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      lmpTeLinkStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- lmpTeLinkVerificationTable
+
+      OBJECT      lmpLinkVerifyTransmissionRate
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpLinkVerifyWavelength
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpLinkVerifyRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required, and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      lmpLinkVerifyStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- lmpDataLinkTable
+
+      OBJECT      lmpDataLinkAddressType
+      SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Only ipv4(1) and ipv6(2) address types need to be
+           supported for numbered links.  For unnumbered links, the
+           unknown(0) address type needs to be supported."
+
+      OBJECT      lmpDataLinkIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "The size of the data-bearing link IP address depends on
+           the type of data-bearing link.  Data-bearing link IP
+           address size is zero if the link is unnumbered, four if
+           the link IP address is IPv4, and sixteen if the link IP
+           address is IPv6."
+
+      OBJECT      lmpDataLinkRemoteIpAddress
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required if the link verification
+           procedure is enabled."
+
+      OBJECT      lmpDataLinkRemoteIfId
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required if the link verification
+           procedure is enabled."
+
+      OBJECT      lmpDataLinkEncodingType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      lmpDataLinkActiveOperStatus
+      SYNTAX      INTEGER { upAlloc(1), upFree(2), down(3) }
+      DESCRIPTION
+          "A value of testing(4) need not be supported."
+
+      OBJECT      lmpDataLinkPassiveOperStatus
+      SYNTAX      INTEGER { upAlloc(1), upFree(2), down(3) }
+      DESCRIPTION
+          "A value of psvTst(4) need not be supported."
+
+      OBJECT      lmpDataLinkRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required, and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      lmpDataLinkStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+   ::= { lmpCompliances 2 }
+
+-- Units of conformance
+
+lmpNodeGroup OBJECT-GROUP
+   OBJECTS { lmpAdminStatus,
+             lmpOperStatus,
+             lmpNbrAdminStatus,
+             lmpNbrOperStatus,
+             lmpNbrRowStatus,
+             lmpNbrStorageType,
+             lmpUnprotectedNotificationsEnabled,
+             lmpNotificationMaxRate
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects that represent LMP node
+           configuration."
+   ::= { lmpGroups 1 }
+
+lmpControlChannelGroup OBJECT-GROUP
+   OBJECTS {
+             lmpNbrRetransmitInterval,
+             lmpNbrRetryLimit,
+             lmpNbrRetransmitDelta,
+             lmpNbrAdminStatus,
+             lmpNbrOperStatus,
+             lmpNbrRowStatus,
+             lmpNbrStorageType,
+             lmpCcHelloIntervalDefault,
+             lmpCcHelloIntervalDefaultMin,
+             lmpCcHelloIntervalDefaultMax,
+             lmpCcHelloDeadIntervalDefault,
+             lmpCcHelloDeadIntervalDefaultMin,
+             lmpCcHelloDeadIntervalDefaultMax,
+             lmpCcNbrNodeId,
+             lmpCcRemoteId,
+             lmpCcRemoteAddressType,
+             lmpCcRemoteIpAddr,
+             lmpCcSetupRole,
+             lmpCcAuthentication,
+             lmpCcHelloInterval,
+             lmpCcHelloIntervalMin,
+             lmpCcHelloIntervalMax,
+             lmpCcHelloIntervalNegotiated,
+             lmpCcHelloDeadInterval,
+             lmpCcHelloDeadIntervalMin,
+             lmpCcHelloDeadIntervalMax,
+             lmpCcHelloDeadIntervalNegotiated,
+             lmpCcOperStatus,
+             lmpCcRowStatus,
+             lmpCcStorageType,
+             lmpCcUpDownNotificationsEnabled
+           }
+   STATUS  current
+   DESCRIPTION
+          "Objects that can be used to configure LMP interface."
+   ::= { lmpGroups 2 }
+
+lmpCcIsInterfaceGroup OBJECT-GROUP
+   OBJECTS { lmpCcIsIf }
+   STATUS  current
+   DESCRIPTION
+          "Objects that can be used to configure control channels
+           that are interfaces."
+   ::= { lmpGroups 3 }
+
+lmpCcIsNotInterfaceGroup OBJECT-GROUP
+   OBJECTS { lmpCcUnderlyingIfIndex,
+             lmpCcIsIf,
+             lmpCcLastChange,
+             lmpCcAdminStatus
+           }
+   STATUS  current
+   DESCRIPTION
+          "Objects that can be used to configure control channels
+           that are not interfaces."
+   ::= { lmpGroups 4 }
+
+lmpLinkPropertyCorrelationGroup OBJECT-GROUP
+   OBJECTS { lmpLinkPropertyNotificationsEnabled }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects used to configure the link
+           property correlation procedure."
+   ::= { lmpGroups 5 }
+
+lmpLinkVerificationGroup OBJECT-GROUP
+   OBJECTS { lmpGlobalLinkVerificationInterval,
+             lmpLinkVerifyInterval,
+             lmpLinkVerifyDeadInterval,
+             lmpLinkVerifyTransportMechanism,
+             lmpLinkVerifyAllLinks,
+             lmpLinkVerifyTransmissionRate,
+             lmpLinkVerifyWavelength,
+             lmpLinkVerifyRowStatus,
+             lmpLinkVerifyStorageType,
+             lmpDataLinkNotificationsEnabled
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects that represent the link
+           verification procedure configuration."
+   ::= { lmpGroups 6 }
+
+lmpPerfGroup OBJECT-GROUP
+   OBJECTS { lmpCcInOctets,
+             lmpCcInDiscards,
+             lmpCcInErrors,
+             lmpCcOutOctets,
+             lmpCcOutDiscards,
+             lmpCcOutErrors,
+             lmpCcConfigReceived,
+             lmpCcConfigSent,
+             lmpCcConfigRetransmit,
+             lmpCcConfigAckReceived,
+             lmpCcConfigAckSent,
+             lmpCcConfigNackSent,
+             lmpCcConfigNackReceived,
+             lmpCcHelloReceived,
+             lmpCcHelloSent,
+             lmpCcBeginVerifyReceived,
+             lmpCcBeginVerifySent,
+             lmpCcBeginVerifyRetransmit,
+             lmpCcBeginVerifyAckReceived,
+             lmpCcBeginVerifyAckSent,
+             lmpCcBeginVerifyNackReceived,
+             lmpCcBeginVerifyNackSent,
+             lmpCcEndVerifyReceived,
+             lmpCcEndVerifySent,
+             lmpCcEndVerifyRetransmit,
+             lmpCcEndVerifyAckReceived,
+             lmpCcEndVerifyAckSent,
+             lmpCcTestStatusSuccessReceived,
+             lmpCcTestStatusSuccessSent,
+             lmpCcTestStatusSuccessRetransmit,
+             lmpCcTestStatusFailureReceived,
+             lmpCcTestStatusFailureSent,
+             lmpCcTestStatusFailureRetransmit,
+             lmpCcTestStatusAckReceived,
+             lmpCcTestStatusAckSent,
+             lmpCcLinkSummaryReceived,
+             lmpCcLinkSummarySent,
+             lmpCcLinkSummaryRetransmit,
+             lmpCcLinkSummaryAckReceived,
+             lmpCcLinkSummaryAckSent,
+             lmpCcLinkSummaryNackReceived,
+             lmpCcLinkSummaryNackSent,
+             lmpCcChannelStatusReceived,
+             lmpCcChannelStatusSent,
+             lmpCcChannelStatusRetransmit,
+             lmpCcChannelStatusAckReceived,
+             lmpCcChannelStatusAckSent,
+             lmpCcChannelStatusReqReceived,
+             lmpCcChannelStatusReqSent,
+             lmpCcChannelStatusReqRetransmit,
+             lmpCcChannelStatusRspReceived,
+             lmpCcChannelStatusRspSent,
+             lmpCcCounterDiscontinuityTime,
+             lmpTeInOctets,
+             lmpTeOutOctets,
+             lmpTeBeginVerifyReceived,
+             lmpTeBeginVerifySent,
+             lmpTeBeginVerifyRetransmit,
+             lmpTeBeginVerifyAckReceived,
+             lmpTeBeginVerifyAckSent,
+             lmpTeBeginVerifyNackReceived,
+             lmpTeBeginVerifyNackSent,
+             lmpTeEndVerifyReceived,
+             lmpTeEndVerifySent,
+             lmpTeEndVerifyRetransmit,
+             lmpTeEndVerifyAckReceived,
+             lmpTeEndVerifyAckSent,
+             lmpTeTestStatusSuccessReceived,
+             lmpTeTestStatusSuccessSent,
+             lmpTeTestStatusSuccessRetransmit,
+             lmpTeTestStatusFailureReceived,
+             lmpTeTestStatusFailureSent,
+             lmpTeTestStatusFailureRetransmit,
+             lmpTeTestStatusAckReceived,
+             lmpTeTestStatusAckSent,
+             lmpTeLinkSummaryReceived,
+             lmpTeLinkSummarySent,
+             lmpTeLinkSummaryRetransmit,
+             lmpTeLinkSummaryAckReceived,
+             lmpTeLinkSummaryAckSent,
+             lmpTeLinkSummaryNackReceived,
+             lmpTeLinkSummaryNackSent,
+             lmpTeChannelStatusReceived,
+             lmpTeChannelStatusSent,
+             lmpTeChannelStatusRetransmit,
+             lmpTeChannelStatusAckReceived,
+             lmpTeChannelStatusAckSent,
+             lmpTeChannelStatusReqReceived,
+             lmpTeChannelStatusReqSent,
+             lmpTeChannelStatusReqRetransmit,
+             lmpTeChannelStatusRspSent,
+             lmpTeChannelStatusRspReceived,
+             lmpTeCounterDiscontinuityTime,
+             lmpDataLinkTestReceived,
+             lmpDataLinkTestSent,
+             lmpDataLinkActiveTestSuccess,
+             lmpDataLinkActiveTestFailure,
+             lmpDataLinkPassiveTestSuccess,
+             lmpDataLinkPassiveTestFailure,
+             lmpDataLinkDiscontinuityTime
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects used to provide performance
+           information about LMP interfaces and data-bearing links."
+   ::= { lmpGroups 7 }
+
+lmpTeLinkGroup OBJECT-GROUP
+   OBJECTS { lmpTeLinkNbrRemoteNodeId,
+             lmpTeLinkVerification,
+             lmpTeLinkFaultManagement,
+             lmpTeLinkDwdm,
+             lmpTeLinkOperStatus,
+             lmpTeLinkRowStatus,
+             lmpTeLinkStorageType,
+             lmpTeLinkNotificationsEnabled
+           }
+   STATUS  current
+   DESCRIPTION
+          "Objects that can be used to configure TE links."
+   ::= { lmpGroups 8 }
+
+lmpDataLinkGroup OBJECT-GROUP
+   OBJECTS { lmpDataLinkType,
+             lmpDataLinkAddressType,
+             lmpDataLinkIpAddr,
+             lmpDataLinkRemoteIpAddress,
+             lmpDataLinkRemoteIfId,
+             lmpDataLinkEncodingType,
+             lmpDataLinkActiveOperStatus,
+             lmpDataLinkPassiveOperStatus,
+             lmpDataLinkRowStatus,
+             lmpDataLinkStorageType
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects that represent data-bearing link
+           configuration."
+   ::= { lmpGroups 9 }
+
+lmpNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS { lmpTeLinkPropertyMismatch,
+                   lmpDataLinkPropertyMismatch,
+                   lmpUnprotected,
+                   lmpControlChannelUp,
+                   lmpControlChannelDown,
+                   lmpTeLinkDegraded,
+                   lmpTeLinkNotDegraded,
+                   lmpDataLinkVerificationFailure }
+   STATUS  current
+   DESCRIPTION
+          "Set of notifications defined in this module."
+   ::= { lmpGroups 10 }
+
+-- End of LMP-MIB
+END
diff --git a/snmp_builder/mibs/MALLOC-MIB.mib b/snmp_builder/mibs/MALLOC-MIB.mib
new file mode 100644
index 0000000..4599493
--- /dev/null
+++ b/snmp_builder/mibs/MALLOC-MIB.mib
@@ -0,0 +1,1364 @@
+MALLOC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, mib-2,
+    Unsigned32, Gauge32, Counter32         FROM SNMPv2-SMI
+
+    RowStatus, TruthValue, StorageType     FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP        FROM SNMPv2-CONF
+
+    InetAddress, InetAddressType           FROM INET-ADDRESS-MIB
+
+    LanguageTag                            FROM IPMROUTE-STD-MIB
+
+    SnmpAdminString                        FROM SNMP-FRAMEWORK-MIB
+
+    IANAscopeSource, IANAmallocRangeSource FROM IANA-MALLOC-MIB;
+
+mallocMIB MODULE-IDENTITY
+    LAST-UPDATED "200306090000Z" -- June 9, 2003
+    ORGANIZATION "IETF MALLOC Working Group"
+    CONTACT-INFO
+            " WG-EMail:   malloc@catarina.usc.edu
+              Subscribe:  malloc-request@catarina.usc.edu
+              Archive:    catarina.usc.edu/pub/multicast/malloc/
+
+              Co-chair/editor:
+              Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA 98052
+              EMail: dthaler@microsoft.com
+
+              Co-chair:
+              Steve Hanna
+              Sun Microsystems, Inc.
+              One Network Drive
+              Burlington, MA 01803
+              EMail: steve.hanna@sun.com"
+    DESCRIPTION
+            "The MIB module for management of multicast address
+            allocation.
+
+            Copyright (C) The Internet Society (2003).  This version of
+            this MIB module is part of RFC 3559; see the RFC itself for
+            full legal notices."
+
+    -- revision log
+
+    REVISION     "200306090000Z" -- June 9, 2003
+    DESCRIPTION
+            "Initial version, published as RFC 3559."
+    ::= { mib-2 101 }
+
+mallocMIBObjects OBJECT IDENTIFIER ::= { mallocMIB 1 }
+
+malloc      OBJECT IDENTIFIER ::= { mallocMIBObjects 1 }
+
+madcap      OBJECT IDENTIFIER ::= { mallocMIBObjects 2 }
+
+--
+-- scalars
+--
+
+mallocCapabilities OBJECT-TYPE
+    SYNTAX     BITS {
+                   startTime(0),
+                   serverMobility(1),
+                   retryAfter(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object describes the capabilities which a client or
+            server supports.  The startTime bit indicates that
+            allocations with a future start time are supported.  The
+            serverMobility bit indicates that allocations can be renewed
+            or released from a server other than the one granting the
+            original allocation.  The retryAfter bit indicates support
+            for a waiting state where the client may check back at a
+            later time to get the status of its request."
+    ::= { malloc 1 }
+
+--
+-- the Scope Table
+--
+
+mallocScopeTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MallocScopeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on multicast
+            scopes from which addresses may be allocated.  Entries in
+            this table may be dynamically discovered via some other
+
+            protocol, such as MZAP, or may be statically configured,
+            such as in an isolated network environment.  Each scope is
+            associated with a range of multicast addresses, and ranges
+            for different rows must be disjoint."
+    ::= { malloc 2 }
+
+mallocScopeEntry OBJECT-TYPE
+    SYNTAX     MallocScopeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information on a
+            particular multicast scope."
+    INDEX      { mallocScopeAddressType, mallocScopeFirstAddress }
+    ::= { mallocScopeTable 1 }
+
+MallocScopeEntry ::= SEQUENCE {
+    mallocScopeAddressType          InetAddressType,
+    mallocScopeFirstAddress         InetAddress,
+    mallocScopeLastAddress          InetAddress,
+    mallocScopeHopLimit             Unsigned32,
+    mallocScopeStatus               RowStatus,
+    mallocScopeSource               IANAscopeSource,
+    mallocScopeDivisible            TruthValue,
+    mallocScopeServerAddressType    InetAddressType,
+    mallocScopeServerAddress        InetAddress,
+    mallocScopeSSM                  TruthValue,
+    mallocScopeStorage              StorageType
+}
+
+mallocScopeAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The type of the addresses in the multicast scope range.
+            Legal values correspond to the subset of address families
+            for which multicast address allocation is supported."
+    ::= { mallocScopeEntry 1 }
+
+mallocScopeFirstAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(0..20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The first address in the multicast scope range.  The type
+            of this address is determined by the value of the
+            mallocScopeAddressType object."
+    ::= { mallocScopeEntry 2 }
+
+mallocScopeLastAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(0..20))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The last address in the multicast scope range.  The type of
+            this address is determined by the value of the
+            mallocScopeAddressType object."
+    ::= { mallocScopeEntry 3 }
+
+mallocScopeHopLimit OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The default IPv4 TTL or IPv6 hop limit which applications
+            should use for groups within the scope."
+    DEFVAL     { 255 }
+    ::= { mallocScopeEntry 4 }
+
+mallocScopeStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  If write
+            access is supported, the other writable objects in this
+            table may be modified even while the status is `active'."
+    ::= { mallocScopeEntry 5 }
+
+mallocScopeSource OBJECT-TYPE
+    SYNTAX     IANAscopeSource
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The method by which this entry was learned."
+    ::= { mallocScopeEntry 6 }
+
+mallocScopeDivisible OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "If false, the server may allocate addresses out of the
+            entire range.  If true, the server must not allocate
+
+            addresses out of the entire range, but may only allocate
+            addresses out of a subrange learned via another method.
+            Creating or deleting a scope which is not divisible has the
+            side effect of creating or deleting the corresponding entry
+            in the mallocAllocRangeTable.  Deleting a scope which is
+            divisible has the side effect of deleting any corresponding
+            entries in the mallocAllocRangeTable, and the
+            mallocRequestTable."
+    DEFVAL     { false }
+    ::= { mallocScopeEntry 7 }
+
+mallocScopeServerAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The type of the address of a multicast address allocation
+            server to which a request may be sent."
+    DEFVAL { unknown }
+    ::= { mallocScopeEntry 8 }
+
+mallocScopeServerAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The address of a multicast address allocation server to
+            which a request may be sent.  The default value is an zero-
+            length address, indicating that no server is known.  The
+            type of this address is determined by the value of the
+            mallocScopeServerAddressType object."
+    DEFVAL { ''h } -- the empty string
+    ::= { mallocScopeEntry 9 }
+
+mallocScopeSSM OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Indicates whether the scope is a Source-Specific Multicast
+            (SSM) range."
+    DEFVAL     { false }
+    ::= { mallocScopeEntry 10 }
+
+mallocScopeStorage OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type for this conceptual row.  Conceptual rows
+            having the value 'permanent' need not allow write-access to
+            any columnar objects in the row."
+    DEFVAL     { nonVolatile }
+    ::= { mallocScopeEntry 11 }
+
+--
+-- the Scope Name Table
+--
+
+mallocScopeNameTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MallocScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on multicast
+            scope names.  Entries in this table may be dynamically
+            discovered via some other protocol, such as MZAP, or may be
+            statically configured, such as in an isolated network
+            environment."
+    ::= { malloc 3 }
+
+mallocScopeNameEntry OBJECT-TYPE
+    SYNTAX     MallocScopeNameEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information on a
+            particular multicast scope name."
+    INDEX      { mallocScopeAddressType, mallocScopeFirstAddress,
+                 IMPLIED mallocScopeNameLangName }
+    ::= { mallocScopeNameTable 1 }
+
+MallocScopeNameEntry ::= SEQUENCE {
+    mallocScopeNameLangName         LanguageTag,
+    mallocScopeNameScopeName        SnmpAdminString,
+    mallocScopeNameDefault          TruthValue,
+    mallocScopeNameStatus           RowStatus,
+    mallocScopeNameStorage          StorageType
+}
+
+mallocScopeNameLangName OBJECT-TYPE
+    SYNTAX     LanguageTag (SIZE(1..94))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The RFC 3066 language tag for the language of the scope
+            name."
+    ::= { mallocScopeNameEntry 1 }
+
+mallocScopeNameScopeName OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The textual name associated with the multicast scope.  The
+            value of this object should be suitable for displaying to
+            end-users, such as when allocating a multicast address in
+            this scope.  If the scope is an IPv4 scope, and no name is
+            specified, the default value of this object should be the
+            string 239.x.x.x/y with x and y replaced appropriately to
+            describe the address and mask length associated with the
+            scope.  If the scope is an IPv6 scope, and no name is
+            specified, the default value of this object should
+            generically describe the scope level (e.g., site)."
+    ::= { mallocScopeNameEntry 2 }
+
+mallocScopeNameDefault OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "If true, indicates a preference that the name in the
+            associated language should be used by applications if no
+            name is available in a desired language."
+    DEFVAL     { false }
+    ::= { mallocScopeNameEntry 3 }
+
+mallocScopeNameStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  If write
+            access is supported, the other writable objects in this
+            table may be modified even while the status is `active'."
+    ::= { mallocScopeNameEntry 4 }
+
+mallocScopeNameStorage OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type for this conceptual row.  Conceptual rows
+            having the value 'permanent' need not allow write-access to
+            any columnar objects in the row."
+    DEFVAL     { nonVolatile }
+    ::= { mallocScopeNameEntry 5 }
+
+--
+-- the Allocation Range Table
+--
+mallocAllocRangeTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MallocAllocRangeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on subranges
+            of addresses from which the device may allocate addresses,
+            if it is a MAAS.  If the device is a Prefix Coordinator, any
+            ranges which the device is advertising to MAAS's will be in
+            this table.  Note that the device may be both a MAAS and a
+            Prefix Coordinator.
+
+            Address ranges for different rows must be disjoint, and must
+            be contained with the address range of the corresponding row
+            of the mallocScopeTable.
+
+            Deleting an allocation range has the side effect of deleting
+            any entries within that range from the mallocAddressTable."
+    ::= { malloc 4 }
+
+mallocAllocRangeEntry OBJECT-TYPE
+    SYNTAX     MallocAllocRangeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information on a
+            particular allocation range."
+    INDEX      { mallocScopeAddressType, mallocScopeFirstAddress,
+                 mallocAllocRangeFirstAddress }
+    ::= { mallocAllocRangeTable 1 }
+
+MallocAllocRangeEntry ::= SEQUENCE {
+    mallocAllocRangeFirstAddress        InetAddress,
+    mallocAllocRangeLastAddress         InetAddress,
+    mallocAllocRangeStatus              RowStatus,
+    mallocAllocRangeSource              IANAmallocRangeSource,
+    mallocAllocRangeLifetime            Unsigned32,
+    mallocAllocRangeMaxLeaseAddrs       Unsigned32,
+    mallocAllocRangeMaxLeaseTime        Unsigned32,
+    mallocAllocRangeNumAllocatedAddrs   Gauge32,
+    mallocAllocRangeNumOfferedAddrs     Gauge32,
+    mallocAllocRangeNumWaitingAddrs     Gauge32,
+    mallocAllocRangeNumTryingAddrs      Gauge32,
+    mallocAllocRangeAdvertisable        TruthValue,
+    mallocAllocRangeTotalAllocatedAddrs Gauge32,
+    mallocAllocRangeTotalRequestedAddrs Gauge32,
+    mallocAllocRangeStorage             StorageType
+}
+
+mallocAllocRangeFirstAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(0..20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The first address in the allocation range.  The type of
+            this address is determined by the value of the
+            mallocScopeAddressType object."
+    ::= { mallocAllocRangeEntry 1 }
+
+mallocAllocRangeLastAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(0..20))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The last address in the allocation range.  The type of this
+            address is determined by the value of the
+            mallocScopeAddressType object."
+    ::= { mallocAllocRangeEntry 2 }
+
+mallocAllocRangeStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  If write
+            access is supported, the other writable objects in this
+            table may be modified even while the status is `active'."
+    ::= { mallocAllocRangeEntry 3 }
+
+mallocAllocRangeSource OBJECT-TYPE
+    SYNTAX     IANAmallocRangeSource
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The means by which this entry was learned."
+    ::= { mallocAllocRangeEntry 4 }
+
+mallocAllocRangeLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds remaining in the lifetime of the
+            (sub)range out of which addresses are being allocated.  A
+            value of 0 indicates that the range is not subject to
+            aging."
+    DEFVAL     { 0 }
+    ::= { mallocAllocRangeEntry 5 }
+
+mallocAllocRangeMaxLeaseAddrs OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of addresses which the server is willing
+            to grant for each future request in this range.  A value of
+            0 means that no specific limit is enforced, as long as the
+            server has valid addresses to allocate."
+    DEFVAL { 0 }
+    ::= { mallocAllocRangeEntry 6 }
+
+mallocAllocRangeMaxLeaseTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum lifetime which the server will grant for future
+            requests in this range.  A value of 0 means that no
+            additional limit is enforced beyond that of
+            mallocAllocRangeLifetime."
+    DEFVAL { 0 }
+    ::= { mallocAllocRangeEntry 7 }
+
+mallocAllocRangeNumAllocatedAddrs OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses in the range which have been
+            allocated.  This value can be used to determine the current
+            address space utilization within the scoped range.  This
+
+            should match the total number of addresses for this scope
+            covered by entries in the mallocAddressTable."
+    ::= { mallocAllocRangeEntry 8 }
+
+mallocAllocRangeNumOfferedAddrs OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses in the range which have been
+            offered.  This number should match the sum of
+            mallocRequestNumAddrs for all entries in the
+            mallocRequestTable in the offered state.  Together with
+            mallocAllocRangeNumAllocatedAddrs and
+            mallocAllocRangeNumTryingAddrs, this can be used to
+            determine the address space utilization within the scoped
+            range in the immediate future."
+    ::= { mallocAllocRangeEntry 9 }
+
+mallocAllocRangeNumWaitingAddrs OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses in the range which have been
+            requested, but whose state is waiting, while the server
+            attempts to acquire more address space."
+    ::= { mallocAllocRangeEntry 10 }
+
+mallocAllocRangeNumTryingAddrs OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses in the scope covered by entries in
+            the mallocRequestTable in the trying state."
+    ::= { mallocAllocRangeEntry 11 }
+
+mallocAllocRangeAdvertisable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The value of this object is true if the range is eligible
+            to be advertised to other MAASs.  When the row is first
+            created, the default value of this object is true if the
+            scope is divisible, and is false otherwise."
+    ::= { mallocAllocRangeEntry 12 }
+
+mallocAllocRangeTotalAllocatedAddrs OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The approximate number of addresses in the range which have
+            been allocated by any MAAS, as determined by a Prefix
+            Coordinator.  This object need only be present if
+            mallocAllocRangeAdvertisable is true.  If the number is
+            unknown, a value of 0 may be reported."
+    ::= { mallocAllocRangeEntry 13 }
+
+mallocAllocRangeTotalRequestedAddrs OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The approximate number of addresses in the range for which
+            there is potential demand among MAASs, as determined by a
+            Prefix Coordinator.  This object need only be present if
+            mallocAllocRangeAdvertisable is true.  If the number is
+            unknown, a value of 0 may be reported."
+    ::= { mallocAllocRangeEntry 14 }
+
+mallocAllocRangeStorage OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type for this conceptual row.  Conceptual rows
+            having the value 'permanent' need not allow write-access to
+            any columnar objects in the row."
+    DEFVAL     { nonVolatile }
+    ::= { mallocAllocRangeEntry 15 }
+
+--
+-- the Request Table
+--
+
+mallocRequestTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MallocRequestEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on allocation
+            requests, whether allocated or in progress.  This table may
+            also be used to determine which clients are responsible for
+            high address space utilization within a given scope.
+
+            Entries in this table reflect requests dynamically received
+            by an address allocation protocol."
+    ::= { malloc 5 }
+
+mallocRequestEntry OBJECT-TYPE
+    SYNTAX     MallocRequestEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information on a
+            particular allocation request."
+    INDEX      { mallocRequestId }
+    ::= { mallocRequestTable 1 }
+
+MallocRequestEntry ::= SEQUENCE {
+    mallocRequestId                      Unsigned32,
+    mallocRequestScopeAddressType        InetAddressType,
+    mallocRequestScopeFirstAddress       InetAddress,
+    mallocRequestStartTime               Unsigned32,
+    mallocRequestEndTime                 Unsigned32,
+    mallocRequestNumAddrs                Unsigned32,
+    mallocRequestState                   INTEGER,
+    mallocRequestClientAddressType       InetAddressType,
+    mallocRequestClientAddress           InetAddress,
+    mallocRequestServerAddressType       InetAddressType,
+    mallocRequestServerAddress           InetAddress,
+    mallocRequestLeaseIdentifier         OCTET STRING
+}
+
+mallocRequestId OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An arbitrary value identifying this row."
+    ::= { mallocRequestEntry 1 }
+
+mallocRequestScopeAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The type of the first address of the scope to which the
+            request applies.  Legal values correspond to the subset of
+            address families for which multicast address allocation is
+            supported."
+    ::= { mallocRequestEntry 2 }
+
+mallocRequestScopeFirstAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The first address of the scope to which the request
+            applies.  This must match mallocScopeFirstAddress for some
+            row in the mallocScopeTable.  The type of this address is
+            determined by the value of the mallocRequestScopeAddressType
+            object."
+    ::= { mallocRequestEntry 3 }
+
+mallocRequestStartTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds remaining before the start time of
+            the request.  A value of 0 means that the allocation is
+            currently in effect."
+    ::= { mallocRequestEntry 4 }
+
+mallocRequestEndTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds remaining before the end time of the
+            request."
+    ::= { mallocRequestEntry 5 }
+
+mallocRequestNumAddrs OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses requested.  If the addresses have
+            been allocated, this number should match the total number of
+            addresses for this request covered by entries in the
+            mallocAddressTable."
+    ::= { mallocRequestEntry 6 }
+
+mallocRequestState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   allocated(1),
+                   offered(2),   -- tentatively allocated
+
+                   waiting(3),   -- waiting for more space
+                   trying(4)     -- working on allocating
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The state of the request.  A value of allocated(1)
+            indicates that one or more entries for this request are
+            present in the mallocAddressTable.  A value of offered(2)
+            indicates that addresses have been offered to the client
+            (e.g. via a MADCAP OFFER message), but the allocation has
+            not been committed.  A value of waiting(3) indicates that
+            the allocation is blocked while the server attempts to
+            acquire more space from which it can allocate addresses.  A
+            value of trying(4) means that no addresses have been offered
+            to the client, but that an attempt to allocate is in
+            progress."
+    ::= { mallocRequestEntry 7 }
+
+mallocRequestClientAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The type of the address of the client that (last) requested
+            this allocation."
+    ::= { mallocRequestEntry 8 }
+
+mallocRequestClientAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the client that (last) requested this
+            allocation.  The type of this address is determined by the
+            value of the mallocRequestClientAddressType object."
+    ::= { mallocRequestEntry 9 }
+
+mallocRequestServerAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The type of the address of the server to which the request
+            was (last) sent."
+    ::= { mallocRequestEntry 10 }
+
+mallocRequestServerAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the server to which the request was (last)
+            sent.  The type of this address is determined by the value
+            of the mallocRequestServerAddressType object."
+    ::= { mallocRequestEntry 11 }
+
+mallocRequestLeaseIdentifier OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The Lease Identifier of this request.  If the allocation
+            mechanism in use does not use Lease Identifiers, then the
+            value is a 0-length string."
+    ::= { mallocRequestEntry 12 }
+
+--
+-- the Address Table
+--
+
+mallocAddressTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MallocAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on blocks of
+            allocated addresses.  This table may be used to map a given
+            multicast group address to the associated request."
+    ::= { malloc 6 }
+
+mallocAddressEntry OBJECT-TYPE
+    SYNTAX     MallocAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information on a
+            particular block of allocated addresses.  The block of
+            addresses covered by each entry in this table must fall
+            within a range corresponding to an entry in the
+            mallocAllocRangeTable."
+    INDEX      { mallocAddressAddressType, mallocAddressFirstAddress }
+    ::= { mallocAddressTable 1 }
+
+MallocAddressEntry ::= SEQUENCE {
+    mallocAddressAddressType             InetAddressType,
+    mallocAddressFirstAddress            InetAddress,
+    mallocAddressNumAddrs                Unsigned32,
+    mallocAddressRequestId               Unsigned32
+}
+
+mallocAddressAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The type of the first address in the allocated block.
+            Legal values correspond to the subset of address families
+            for which multicast address allocation is supported."
+    ::= { mallocAddressEntry 1 }
+
+mallocAddressFirstAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(0..20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The first address in the allocated block.  The type of this
+            address is determined by the value of the
+            mallocAddressAddressType object."
+    ::= { mallocAddressEntry 2 }
+
+mallocAddressNumAddrs OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses in the allocated block."
+    ::= { mallocAddressEntry 3 }
+
+mallocAddressRequestId OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The index of the request which caused this block of
+            addresses to be allocated.  This value must match the value
+            of mallocRequestId for some entry in the
+            mallocRequestTable."
+    ::= { mallocAddressEntry 4 }
+
+--
+-- MADCAP-specific objects
+
+--
+
+madcapConfig OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "Group of objects that count various MADCAP events."
+    ::= { madcap 1 }
+
+madcapConfigExtraAllocationTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The amount of extra time on either side of a lease which
+            the MADCAP server allocates to allow for clock skew among
+            clients."
+    ::= { madcapConfig 1 }
+
+madcapConfigNoResponseDelay OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The amount of time the MADCAP client allows for receiving a
+            response from a MADCAP server."
+    ::= { madcapConfig 2 }
+
+madcapConfigOfferHold OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The amount of time the MADCAP server will reserve an
+            address for after sending an OFFER message in anticipation
+            of receiving a REQUEST message."
+    ::= { madcapConfig 3 }
+
+madcapConfigResponseCacheInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..300)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The amount of time the MADCAP server uses to detect
+            duplicate messages."
+    ::= { madcapConfig 4 }
+
+madcapConfigClockSkewAllowance OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The clock skew threshold used by the MADCAP server to
+            generate Excessive Clock Skew errors."
+    ::= { madcapConfig 5 }
+
+madcapCounters OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A group of objects that count various MADCAP events."
+    ::= { madcap 2 }
+
+madcapTotalErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of transactions for which the MADCAP
+            server has detected an error of any type, regardless of
+            whether the server ignored the request or generated a NAK."
+    ::= { madcapCounters 1 }
+
+madcapRequestsDenied OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of valid requests for which the MADCAP server
+            could not complete an allocation, regardless of whether NAKs
+            were sent.  This corresponds to the Valid Request Could Not
+            Be Completed error code in MADCAP."
+    ::= { madcapCounters 2 }
+
+madcapInvalidRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of invalid requests received by the MADCAP
+            server, regardless of whether NAKs were sent.  This
+            corresponds to the Invalid Request error code in MADCAP."
+    ::= { madcapCounters 3 }
+
+madcapExcessiveClockSkews OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of requests received by the MADCAP server with
+            an excessive clock skew, regardless of whether NAKs were
+            sent.  This corresponds to the Excessive Clock Skew error
+            code in MADCAP."
+    ::= { madcapCounters 4 }
+
+madcapBadLeaseIds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of requests received by the MADCAP server with
+            an unrecognized Lease Identifier, regardless of whether NAKs
+            were sent.  This corresponds to the Lease Identifier Not
+            Recognized error code in MADCAP."
+    ::= { madcapCounters 5 }
+
+madcapDiscovers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of DISCOVER messages received by the MADCAP
+            server."
+    ::= { madcapCounters 6 }
+
+madcapInforms OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of INFORM messages received by the MADCAP
+            server."
+    ::= { madcapCounters 7 }
+
+madcapRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of REQUEST messages received by the MADCAP
+            server."
+    ::= { madcapCounters 8 }
+
+madcapRenews OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of RENEW messages received by the MADCAP
+            server."
+    ::= { madcapCounters 9 }
+
+madcapReleases OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of RELEASE messages received by the MADCAP
+            server."
+    ::= { madcapCounters 10 }
+
+-- conformance information
+
+mallocConformance  OBJECT IDENTIFIER ::= { mallocMIB 2 }
+mallocCompliances  OBJECT IDENTIFIER ::= { mallocConformance 1 }
+mallocGroups       OBJECT IDENTIFIER ::= { mallocConformance 2 }
+
+-- compliance statements
+
+mallocServerReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for multicast address allocation
+            servers implementing the MALLOC MIB without support for
+            read-create (i.e., in read-only mode).  Such a server can
+            then be monitored but can not be configured with this MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mallocBasicGroup,
+                       mallocServerGroup }
+
+        OBJECT      mallocScopeLastAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeHopLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeDivisible
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeSSM
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeStorage
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeNameScopeName
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeNameDefault
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeNameStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeNameStorage
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeLastAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeLifetime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeMaxLeaseAddrs
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeMaxLeaseTime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeStorage
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+    GROUP  madcapServerGroup
+    DESCRIPTION
+            "This group is mandatory for servers which implement the
+            MADCAP client-server protocol."
+
+        OBJECT      madcapConfigExtraAllocationTime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      madcapConfigOfferHold
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      madcapConfigResponseCacheInterval
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      madcapConfigClockSkewAllowance
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { mallocCompliances 1 }
+
+mallocClientReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for clients implementing the
+            MALLOC MIB without support for read-create (i.e., in read-
+            only mode).  Such clients can then be monitored but can not
+            be configured with this MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mallocBasicGroup,
+                       mallocClientGroup }
+
+    GROUP  mallocClientScopeGroup
+    DESCRIPTION
+            "This group is mandatory for clients which maintain a list
+            of multicast scopes."
+
+        OBJECT      mallocScopeLastAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeHopLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeServerAddressType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeServerAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeSSM
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeStorage
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+    GROUP  madcapClientGroup
+    DESCRIPTION
+            "This group is mandatory for clients which implement the
+            MADCAP client-server protocol."
+
+        OBJECT      madcapConfigNoResponseDelay
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { mallocCompliances 2 }
+
+mallocPrefixCoordinatorReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for prefix coordinators
+            implementing the MALLOC MIB without support for read-create
+            (i.e., in read-only mode).  Such devices can then be
+            monitored but can not be configured with this MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mallocBasicGroup,
+                       mallocPrefixCoordinatorGroup }
+
+        OBJECT      mallocScopeLastAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocScopeDivisible
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeLastAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeLifetime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeAdvertisable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      mallocAllocRangeStorage
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { mallocCompliances 3 }
+
+mallocServerFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for multicast address allocation
+            servers implementing the MALLOC MIB with support for read-
+            create.  Such servers can then be both monitored and
+            configured with this MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mallocBasicGroup,
+                       mallocServerGroup }
+
+    GROUP  madcapServerGroup
+    DESCRIPTION
+            "This group is mandatory for servers which implement the
+            MADCAP client-server protocol."
+   ::= { mallocCompliances 4 }
+
+mallocClientFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts implementing the MALLOC
+            MIB with support for read-create.  Such clients can then be
+            both monitored and configured with this MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mallocBasicGroup,
+                       mallocClientGroup }
+
+    GROUP  mallocClientScopeGroup
+    DESCRIPTION
+            "This group is mandatory for clients which maintain a list
+            of multicast scopes."
+
+    GROUP  madcapClientGroup
+    DESCRIPTION
+            "This group is mandatory for clients which implement the
+            MADCAP client-server protocol."
+   ::= { mallocCompliances 5 }
+
+mallocPrefixCoordinatorFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for prefix coordinators
+            implementing the MALLOC MIB with support for read-create.
+            Such devices can then be both monitored and configured with
+            this MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mallocBasicGroup,
+                       mallocPrefixCoordinatorGroup }
+   ::= { mallocCompliances 6 }
+
+-- units of conformance
+
+mallocBasicGroup OBJECT-GROUP
+        OBJECTS { mallocCapabilities, mallocRequestScopeAddressType,
+                  mallocRequestScopeFirstAddress,
+                  mallocRequestStartTime,
+                  mallocRequestEndTime, mallocRequestNumAddrs,
+                  mallocRequestState,
+                  mallocAddressNumAddrs, mallocAddressRequestId
+                }
+        STATUS  current
+        DESCRIPTION
+            "The basic collection of objects providing management of IP
+            multicast address allocation."
+   ::= { mallocGroups 1 }
+
+mallocServerGroup OBJECT-GROUP
+        OBJECTS { mallocScopeLastAddress, mallocScopeHopLimit,
+                  mallocScopeSSM, mallocScopeStatus, mallocScopeStorage,
+                  mallocAllocRangeLastAddress, mallocAllocRangeLifetime,
+                  mallocAllocRangeNumAllocatedAddrs,
+                  mallocAllocRangeNumOfferedAddrs,
+                  mallocAllocRangeNumWaitingAddrs,
+                  mallocAllocRangeNumTryingAddrs,
+                  mallocAllocRangeMaxLeaseAddrs,
+                  mallocAllocRangeMaxLeaseTime, mallocAllocRangeSource,
+                  mallocAllocRangeStatus, mallocAllocRangeStorage,
+                  mallocScopeDivisible, mallocScopeSource,
+                  mallocScopeNameScopeName, mallocScopeNameDefault,
+                  mallocScopeNameStatus, mallocScopeNameStorage,
+                  mallocRequestClientAddressType,
+                  mallocRequestClientAddress
+                }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing management of multicast
+            address allocation in servers."
+   ::= { mallocGroups 2 }
+
+mallocClientGroup OBJECT-GROUP
+        OBJECTS { mallocRequestServerAddressType,
+                  mallocRequestServerAddress }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing management of multicast
+            address allocation in clients."
+   ::= { mallocGroups 3 }
+
+madcapServerGroup OBJECT-GROUP
+        OBJECTS { madcapConfigClockSkewAllowance,
+           madcapConfigExtraAllocationTime, madcapConfigOfferHold,
+           madcapConfigResponseCacheInterval,
+           madcapTotalErrors, madcapRequestsDenied,
+           madcapInvalidRequests, madcapBadLeaseIds,
+           madcapExcessiveClockSkews, madcapDiscovers,
+           madcapInforms, madcapRequests,
+           madcapRenews, madcapReleases }
+        STATUS  current
+        DESCRIPTION
+            "A collection of objects providing management of MADCAP
+            servers."
+   ::= { mallocGroups 4 }
+
+madcapClientGroup OBJECT-GROUP
+    OBJECTS { mallocRequestLeaseIdentifier,
+              madcapConfigNoResponseDelay }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing management of MADCAP
+            clients."
+   ::= { mallocGroups 5 }
+
+mallocClientScopeGroup OBJECT-GROUP
+    OBJECTS { mallocScopeLastAddress, mallocScopeHopLimit,
+              mallocScopeStatus, mallocScopeStorage, mallocScopeSource,
+              mallocScopeServerAddressType, mallocScopeServerAddress,
+              mallocScopeSSM, mallocScopeNameScopeName,
+              mallocScopeNameDefault, mallocScopeNameStatus,
+              mallocScopeNameStorage }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing management of multicast
+            scope information in clients."
+   ::= { mallocGroups 6 }
+
+mallocPrefixCoordinatorGroup OBJECT-GROUP
+    OBJECTS { mallocAllocRangeLastAddress, mallocAllocRangeLifetime,
+              mallocAllocRangeStatus, mallocAllocRangeStorage,
+              mallocAllocRangeSource,
+              mallocAllocRangeTotalAllocatedAddrs,
+              mallocAllocRangeTotalRequestedAddrs,
+              mallocAllocRangeAdvertisable, mallocScopeLastAddress,
+              mallocScopeDivisible, mallocScopeSource }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects for managing Prefix Coordinators."
+    ::= { mallocGroups 7 }
+END
diff --git a/snmp_builder/mibs/MAU-MIB.mib b/snmp_builder/mibs/MAU-MIB.mib
new file mode 100644
index 0000000..e2767c6
--- /dev/null
+++ b/snmp_builder/mibs/MAU-MIB.mib
@@ -0,0 +1,1740 @@
+MAU-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+    Counter32, Integer32, Counter64,
+    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, mib-2
+      FROM SNMPv2-SMI         -- RFC 2578
+    TruthValue, AutonomousType, TEXTUAL-CONVENTION
+      FROM SNMPv2-TC          -- RFC 2579
+    OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF        -- RFC 2580
+    InterfaceIndex
+      FROM IF-MIB             -- RFC 2863
+    IANAifMauTypeListBits, IANAifMauMediaAvailable,
+    IANAifMauAutoNegCapBits, IANAifJackType
+      FROM IANA-MAU-MIB
+                       -- http://www.iana.org/assignments/ianamau-mib
+    ;
+
+  mauMod MODULE-IDENTITY
+    LAST-UPDATED "200704210000Z"  -- April 21, 2007
+    ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group"
+    CONTACT-INFO
+      "WG charter:
+        http://www.ietf.org/html.charters/hubmib-charter.html
+
+      Mailing Lists:
+        General Discussion: hubmib@ietf.org
+        To Subscribe: hubmib-request@ietf.org
+        In Body: subscribe your_email_address
+
+       Chair: Bert Wijnen
+      Postal: Alcatel-Lucent
+              Schagen 33
+              3461 GL Linschoten
+              Netherlands
+       Phone: +31-348-407-775
+       EMail: bwijnen@alcatel-lucent.com
+
+      Editor: Edward Beili
+      Postal: Actelis Networks Inc.
+              25 Bazel St., P.O.B. 10173
+              Petach-Tikva 10173
+              Israel
+         Tel: +972-3-924-3491
+       EMail: edward.beili@actelis.com"
+    DESCRIPTION
+      "Management information for 802.3 MAUs.
+
+      The following reference is used throughout this MIB module:
+
+      [IEEE802.3] refers to:
+         IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information
+         technology - Telecommunications and information exchange
+         between systems - Local and metropolitan area networks -
+         Specific requirements - Part 3: Carrier sense multiple
+         access with collision detection (CSMA/CD) access method and
+         physical layer specifications'.
+
+         Of particular interest is Clause 30, 'Management'.
+
+      Copyright (C) The IETF Trust (2007).
+      This version of this MIB module is part of RFC 4836;
+      see the RFC itself for full legal notices."
+
+    REVISION    "200704210000Z"  -- April 21, 2007
+    DESCRIPTION "Updated to reference IANA maintaned textual
+                conventions for MAU types, Media Availability state,
+                Auto Negotiation capabilities, and jack types,
+                instead of using internally defined values.
+
+                This version is published as RFC 4836."
+
+    REVISION    "200309190000Z"  -- September 19, 2003
+    DESCRIPTION "Updated to include support for 10 Gb/s MAUs.
+                This resulted in the following revisions:
+                - Added OBJECT-IDENTITY definitions for
+                  10 gigabit MAU types
+
+                - Added fiberLC jack type to JackType TC
+                - Extended ifMauTypeListBits with bits for
+                  the 10 gigabit MAU types
+                - Added enumerations to ifMauMediaAvailable,
+                  and updated its DESCRIPTION to reflect
+                  behaviour at 10 Gb/s
+                - Added 64-bit version of ifMauFalseCarriers
+                  and added mauIfGrpHCStats object group to
+                  contain the new object
+                - Deprecated mauModIfCompl2 and replaced it
+                  with mauModIfCompl3, which includes the new
+                  object group
+
+                 This version published as RFC 3636."
+
+    REVISION    "199908240400Z" -- August 24, 1999
+    DESCRIPTION "This version published as RFC 2668.  Updated
+                to include support for 1000 Mb/sec
+                MAUs and flow control negotiation."
+
+    REVISION    "199710310000Z" -- October 31, 1997
+    DESCRIPTION "Version published as RFC 2239."
+
+    REVISION    "199309300000Z" -- September 30, 1993
+    DESCRIPTION "Initial version, published as RFC 1515."
+    ::= { snmpDot3MauMgt 6 }
+
+   snmpDot3MauMgt OBJECT IDENTIFIER ::= { mib-2 26 }
+
+   -- Textual Conventions
+
+   JackType ::= TEXTUAL-CONVENTION
+     STATUS      deprecated
+     DESCRIPTION "********* THIS TC IS DEPRECATED **********
+
+                 This TC has been deprecated in favour of
+                 IANAifJackType.
+
+                 Common enumeration values for repeater
+                 and interface MAU jack types."
+     SYNTAX      INTEGER {
+                           other(1),
+                           rj45(2),
+                           rj45S(3), -- rj45 shielded
+                           db9(4),
+                           bnc(5),
+                           fAUI(6),  -- female aui
+
+                           mAUI(7),  -- male aui
+                           fiberSC(8),
+                           fiberMIC(9),
+                           fiberST(10),
+                           telco(11),
+                           mtrj(12),  -- fiber MT-RJ
+                           hssdc(13), -- fiber channel style-2
+                           fiberLC(14)
+                       }
+
+   dot3RpMauBasicGroup
+       OBJECT IDENTIFIER ::= { snmpDot3MauMgt 1 }
+   dot3IfMauBasicGroup
+       OBJECT IDENTIFIER ::= { snmpDot3MauMgt 2 }
+   dot3BroadMauBasicGroup
+       OBJECT IDENTIFIER ::= { snmpDot3MauMgt 3 }
+
+   -- OIDs under the following branch are reserved for
+   -- the IANA-MAU-MIB to assign as MAU type values:
+   --                        { snmpDot3MauMgt 4 }
+
+   dot3IfMauAutoNegGroup
+       OBJECT IDENTIFIER ::= { snmpDot3MauMgt 5 }
+
+   -- the following OID is the MODULE-IDENTITY value
+   -- for this MIB module:   { snmpDot3MauMgt 6 }
+
+   --
+   -- The Basic Repeater MAU Table
+   --
+
+   rpMauTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF RpMauEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION "Table of descriptive and status information
+                 about the MAU(s) attached to the ports of a
+                 repeater."
+     ::= { dot3RpMauBasicGroup 1 }
+
+   rpMauEntry OBJECT-TYPE
+     SYNTAX      RpMauEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION "An entry in the table, containing information
+                 about a single MAU."
+     INDEX       { rpMauGroupIndex,
+                   rpMauPortIndex,
+                   rpMauIndex
+                 }
+     ::= { rpMauTable 1 }
+
+   RpMauEntry ::=
+     SEQUENCE {
+         rpMauGroupIndex                     Integer32,
+         rpMauPortIndex                      Integer32,
+         rpMauIndex                          Integer32,
+         rpMauType                           AutonomousType,
+         rpMauStatus                         INTEGER,
+         rpMauMediaAvailable                 IANAifMauMediaAvailable,
+         rpMauMediaAvailableStateExits       Counter32,
+         rpMauJabberState                    INTEGER,
+         rpMauJabberingStateEnters           Counter32,
+         rpMauFalseCarriers                  Counter32
+   }
+
+   rpMauGroupIndex OBJECT-TYPE
+     SYNTAX      Integer32 (1..2147483647)
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS      current
+     DESCRIPTION "This variable uniquely identifies the group
+                 containing the port to which the MAU described
+                 by this entry is connected.
+
+                 Note:  In practice, a group will generally be
+                 a field-replaceable unit (i.e., module, card,
+                 or board) that can fit in the physical system
+                 enclosure, and the group number will correspond
+                 to a number marked on the physical enclosure.
+
+                 The group denoted by a particular value of this
+                 object is the same as the group denoted by the
+                 same value of rptrGroupIndex."
+     REFERENCE   "RFC 2108, rptrGroupIndex."
+     ::= { rpMauEntry 1 }
+
+   rpMauPortIndex OBJECT-TYPE
+     SYNTAX      Integer32 (1..2147483647)
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS      current
+     DESCRIPTION "This variable uniquely identifies the repeater
+                 port within group rpMauGroupIndex to which the
+                 MAU described by this entry is connected."
+     REFERENCE   "RFC 2108, rptrPortIndex."
+     ::= { rpMauEntry 2 }
+
+   rpMauIndex OBJECT-TYPE
+     SYNTAX      Integer32 (1..2147483647)
+     MAX-ACCESS  read-only  -- read-only since originally an
+                            -- SMIv1 index
+     STATUS      current
+     DESCRIPTION "This variable uniquely identifies the MAU
+                 described by this entry from among other
+                 MAUs connected to the same port
+                 (rpMauPortIndex)."
+     REFERENCE   "[IEEE802.3], 30.5.1.1.1, aMAUID."
+     ::= { rpMauEntry 3 }
+
+   rpMauType OBJECT-TYPE
+     SYNTAX      AutonomousType
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION "This object identifies the MAU type.  Values for
+                 standard IEEE 802.3 MAU types are defined in the
+                 IANA maintained IANA-MAU-MIB module, as
+                 OBJECT-IDENTITIES of dot3MauType.
+                 If the MAU type is unknown, the object identifier
+                 zeroDotZero is returned."
+     REFERENCE   "[IEEE802.3], 30.5.1.1.2, aMAUType."
+     ::= { rpMauEntry 4 }
+
+   rpMauStatus OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       other(1),
+                       unknown(2),
+                       operational(3),
+                       standby(4),
+                       shutdown(5),
+                       reset(6)
+                   }
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "The current state of the MAU.  This object MAY
+                   be implemented as a read-only object by those
+                   agents and MAUs that do not implement software
+                   control of the MAU state.  Some agents may not
+                   support setting the value of this object to some
+                   of the enumerated values.
+
+                   The value other(1) is returned if the MAU is in
+                   a state other than one of the states 2 through
+                   6.
+
+                   The value unknown(2) is returned when the MAU's
+                   true state is unknown; for example, when it is
+                   being initialized.
+
+                   A MAU in the operational(3) state is fully
+                   functional; it operates, and passes signals to its
+                   attached DTE or repeater port in accordance to
+                   its specification.
+
+                   A MAU in standby(4) state forces DI and CI to
+                   idle, and the media transmitter to idle or fault,
+                   if supported.  Standby(4) mode only applies to
+                   link type MAUs.  The state of
+                   rpMauMediaAvailable is unaffected.
+
+                   A MAU in shutdown(5) state assumes the same
+                   condition on DI, CI, and the media transmitter,
+                   as though it were powered down or not connected.
+                   The MAU MAY return other(1) value for the
+                   rpMauJabberState and rpMauMediaAvailable objects
+                   when it is in this state.  For an AUI, this
+                   state will remove power from the AUI.
+
+                   Setting this variable to the value reset(6)
+                   resets the MAU in the same manner as a
+                   power-off, power-on cycle of at least one-half
+                   second would.  The agent is not required to
+                   return the value reset(6).
+
+                   Setting this variable to the value
+                   operational(3), standby(4), or shutdown(5)
+                   causes the MAU to assume the respective state,
+                   except that setting a mixing-type MAU or an AUI
+                   to standby(4) will cause the MAU to enter the
+                   shutdown state."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,
+                   30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,
+                   acResetMAU."
+       ::= { rpMauEntry 5 }
+
+   rpMauMediaAvailable OBJECT-TYPE
+       SYNTAX      IANAifMauMediaAvailable
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "This object identifies Media Available state of
+                   the MAU, complementary to the rpMauStatus.  Values
+                   for the standard IEEE 802.3 Media Available states
+                   are defined in the IANA maintained IANA-MAU-MIB
+
+                   module, as IANAifMauMediaAvailable TC."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."
+       ::= { rpMauEntry 6 }
+
+   rpMauMediaAvailableStateExits OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of times that
+                   rpMauMediaAvailable for this MAU instance leaves
+                   the state available(3).
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of rptrMonitorPortLastChange."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.
+                   RFC 2108, rptrMonitorPortLastChange"
+       ::= { rpMauEntry 7 }
+
+   rpMauJabberState OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       other(1),
+                       unknown(2),
+                       noJabber(3),
+                       jabbering(4)
+                   }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "The value other(1) is returned if the jabber
+                   state is not 2, 3, or 4.  The agent MUST always
+                   return other(1) for MAU type dot3MauTypeAUI.
+
+                   The value unknown(2) is returned when the MAU's
+                   true state is unknown; for example, when it is
+                   being initialized.
+
+                   If the MAU is not jabbering the agent returns
+                   noJabber(3).  This is the 'normal' state.
+
+                   If the MAU is in jabber state the agent returns
+                   the jabbering(4) value."
+       REFERENCE "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."
+       ::= { rpMauEntry 8 }
+
+   rpMauJabberingStateEnters OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of times that
+                   mauJabberState for this MAU instance enters the
+                   state jabbering(4).  For MAUs of type
+                   dot3MauTypeAUI, dot3MauType100BaseT4,
+                   dot3MauType100BaseTX, dot3MauType100BaseFX, and
+                   all 1000Mbps types, this counter will always
+                   indicate zero.
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of rptrMonitorPortLastChange."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.
+                   RFC 2108, rptrMonitorPortLastChange"
+       ::= { rpMauEntry 9 }
+
+   rpMauFalseCarriers OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of false carrier events
+                   during IDLE in 100BASE-X links.  This counter
+                   does not increment at the symbol rate.  It can
+                   increment after a valid carrier completion at a
+                   maximum rate of once per 100 ms until the next
+                   carrier event.
+
+                   This counter increments only for MAUs of type
+                   dot3MauType100BaseT4, dot3MauType100BaseTX,
+                   dot3MauType100BaseFX, and all 1000Mbps types.
+
+                   For all other MAU types, this counter will
+                   always indicate zero.
+
+                   The approximate minimum time for rollover of
+                   this counter is 7.4 hours.
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of rptrMonitorPortLastChange."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.
+                   RFC 2108, rptrMonitorPortLastChange"
+       ::= { rpMauEntry 10 }
+
+   -- The rpJackTable applies to MAUs attached to repeaters
+   -- which have one or more external jacks (connectors).
+
+   rpJackTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF RpJackEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "Information about the external jacks attached
+                   to MAUs attached to the ports of a repeater."
+       ::= { dot3RpMauBasicGroup 2 }
+
+   rpJackEntry OBJECT-TYPE
+       SYNTAX      RpJackEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "An entry in the table, containing information
+                   about a particular jack."
+       INDEX       { rpMauGroupIndex,
+                     rpMauPortIndex,
+                     rpMauIndex,
+                     rpJackIndex
+                   }
+       ::= { rpJackTable 1 }
+
+   RpJackEntry ::=
+       SEQUENCE {
+           rpJackIndex                         Integer32,
+           rpJackType                          IANAifJackType
+       }
+
+   rpJackIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "This variable uniquely identifies the jack
+                   described by this entry from among other jacks
+                   attached to the same MAU (rpMauIndex)."
+       ::= { rpJackEntry 1 }
+
+   rpJackType OBJECT-TYPE
+       SYNTAX      IANAifJackType
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "The jack connector type, as it appears on the
+                   outside of the system."
+       ::= { rpJackEntry 2 }
+
+   --
+   -- The Basic Interface MAU Table
+   --
+
+   ifMauTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF IfMauEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "Table of descriptive and status information
+                   about MAU(s) attached to an interface."
+       ::= { dot3IfMauBasicGroup 1 }
+
+   ifMauEntry OBJECT-TYPE
+       SYNTAX      IfMauEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "An entry in the table, containing information
+                   about a single MAU."
+       INDEX       { ifMauIfIndex,
+                     ifMauIndex
+                   }
+       ::= { ifMauTable 1 }
+
+   IfMauEntry ::=
+       SEQUENCE {
+           ifMauIfIndex                      InterfaceIndex,
+           ifMauIndex                        Integer32,
+           ifMauType                         AutonomousType,
+           ifMauStatus                       INTEGER,
+           ifMauMediaAvailable               IANAifMauMediaAvailable,
+           ifMauMediaAvailableStateExits     Counter32,
+           ifMauJabberState                  INTEGER,
+           ifMauJabberingStateEnters         Counter32,
+           ifMauFalseCarriers                Counter32,
+           ifMauTypeList                     Integer32,
+           ifMauDefaultType                  AutonomousType,
+           ifMauAutoNegSupported             TruthValue,
+           ifMauTypeListBits                 IANAifMauTypeListBits,
+           ifMauHCFalseCarriers              Counter64
+       }
+
+   ifMauIfIndex OBJECT-TYPE
+       SYNTAX      InterfaceIndex
+       MAX-ACCESS  read-only  -- read-only since originally an
+                              -- SMIv1 index
+       STATUS      current
+       DESCRIPTION "This variable uniquely identifies the interface
+                   to which the MAU described by this entry is
+                   connected."
+       REFERENCE   "RFC 2863, ifIndex"
+       ::= { ifMauEntry 1 }
+
+   ifMauIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  read-only  -- read-only since originally an
+                              -- SMIv1 index
+       STATUS      current
+       DESCRIPTION "This variable uniquely identifies the MAU
+                   described by this entry from among other MAUs
+                   connected to the same interface (ifMauIfIndex)."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.1, aMAUID."
+       ::= { ifMauEntry 2 }
+
+   ifMauType OBJECT-TYPE
+     SYNTAX      AutonomousType
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION "This object identifies the MAU type.  Values for
+                 standard IEEE 802.3 MAU types are defined in the
+                 IANA maintained IANA-MAU-MIB module, as
+                 OBJECT-IDENTITIES of dot3MauType.
+                 If the MAU type is unknown, the object identifier
+                 zeroDotZero is returned.
+
+                 This object represents the operational type of
+                 the MAU, as determined by either 1) the result
+                 of the auto-negotiation function or 2) if
+                 auto-negotiation is not enabled or is not
+                 implemented for this MAU, by the value of the
+                 object ifMauDefaultType.  In case 2), a set to
+                 the object ifMauDefaultType will force the MAU
+                 into the new operating mode."
+     REFERENCE   "[IEEE802.3], 30.5.1.1.2, aMAUType."
+     ::= { ifMauEntry 3 }
+
+   ifMauStatus OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       other(1),
+                       unknown(2),
+                       operational(3),
+                       standby(4),
+                       shutdown(5),
+                       reset(6)
+                   }
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "The current state of the MAU.  This object MAY
+                   be implemented as a read-only object by those
+                   agents and MAUs that do not implement software
+                   control of the MAU state.  Some agents may not
+
+                   support setting the value of this object to some
+                   of the enumerated values.
+
+                   The value other(1) is returned if the MAU is in
+                   a state other than one of the states 2 through
+                   6.
+
+                   The value unknown(2) is returned when the MAU's
+                   true state is unknown; for example, when it is
+                   being initialized.
+
+                   A MAU in the operational(3) state is fully
+                   functional; it operates, and passes signals to its
+                   attached DTE or repeater port in accordance to
+                   its specification.
+
+                   A MAU in standby(4) state forces DI and CI to
+                   idle and the media transmitter to idle or fault,
+                   if supported.  Standby(4) mode only applies to
+                   link type MAUs.  The state of
+                   ifMauMediaAvailable is unaffected.
+
+                   A MAU in shutdown(5) state assumes the same
+                   condition on DI, CI, and the media transmitter,
+                   as though it were powered down or not connected.
+                   The MAU MAY return other(1) value for the
+                   ifMauJabberState and ifMauMediaAvailable objects
+                   when it is in this state.  For an AUI, this
+                   state will remove power from the AUI.
+
+                   Setting this variable to the value reset(6)
+                   resets the MAU in the same manner as a
+                   power-off, power-on cycle of at least one-half
+                   second would.  The agent is not required to
+                   return the value reset(6).
+
+                   Setting this variable to the value
+                   operational(3), standby(4), or shutdown(5)
+                   causes the MAU to assume the respective state,
+                   except that setting a mixing-type MAU or an AUI
+                   to standby(4) will cause the MAU to enter the
+                   shutdown state."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,
+                   30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,
+                   acResetMAU."
+       ::= { ifMauEntry 4 }
+
+   ifMauMediaAvailable OBJECT-TYPE
+       SYNTAX      IANAifMauMediaAvailable
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "This object identifies Media Available state of
+                   the MAU, complementary to the ifMauStatus.  Values
+                   for the standard IEEE 802.3 Media Available states
+                   are defined in the IANA maintained IANA-MAU-MIB
+                   module, as IANAifMauMediaAvailable TC."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."
+       ::= { ifMauEntry 5 }
+
+   ifMauMediaAvailableStateExits OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of times that
+                   ifMauMediaAvailable for this MAU instance leaves
+                   the state available(3).
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of ifCounterDiscontinuityTime."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.
+                   RFC 2863, ifCounterDiscontinuityTime."
+       ::= { ifMauEntry 6 }
+
+   ifMauJabberState OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       other(1),
+                       unknown(2),
+                       noJabber(3),
+                       jabbering(4)
+                   }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "The value other(1) is returned if the jabber
+                   state is not 2, 3, or 4.  The agent MUST always
+                   return other(1) for MAU type dot3MauTypeAUI.
+
+                   The value unknown(2) is returned when the MAU's
+                   true state is unknown; for example, when it is
+                   being initialized.
+
+                   If the MAU is not jabbering the agent returns
+                   noJabber(3).  This is the 'normal' state.
+
+                   If the MAU is in jabber state the agent returns
+
+                   the jabbering(4) value."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."
+       ::= { ifMauEntry 7 }
+
+   ifMauJabberingStateEnters OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of times that
+                   mauJabberState for this MAU instance enters the
+                   state jabbering(4).  This counter will always
+                   indicate zero for MAUs of type dot3MauTypeAUI
+                   and those of speeds above 10Mbps.
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of ifCounterDiscontinuityTime."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.
+                   RFC 2863, ifCounterDiscontinuityTime."
+       ::= { ifMauEntry 8 }
+
+   ifMauFalseCarriers OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of false carrier events
+                   during IDLE in 100BASE-X and 1000BASE-X links.
+
+                   For all other MAU types, this counter will
+                   always indicate zero.  This counter does not
+                   increment at the symbol rate.
+
+                   It can increment after a valid carrier
+                   completion at a maximum rate of once per 100 ms
+                   for 100BASE-X and once per 10us for 1000BASE-X
+                   until the next CarrierEvent.
+
+                   This counter can roll over very quickly.  A
+                   management station is advised to poll the
+                   ifMauHCFalseCarriers instead of this counter in
+                   order to avoid loss of information.
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of ifCounterDiscontinuityTime."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.
+
+                   RFC 2863, ifCounterDiscontinuityTime."
+       ::= { ifMauEntry 9 }
+
+   ifMauTypeList OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This object has been deprecated in favour of
+                   ifMauTypeListBits.
+
+                   A value that uniquely identifies the set of
+                   possible IEEE 802.3 types that the MAU could be.
+                   The value is a sum that initially takes the
+                   value zero.  Then, for each type capability of
+                   this MAU, 2 raised to the power noted below is
+                   added to the sum.  For example, a MAU that has
+                   the capability to be only 10BASE-T would have a
+                   value of 512 (2**9).  In contrast, a MAU that
+                   supports both 10Base-T (full duplex) and
+                   100BASE-TX (full duplex) would have a value of
+                   ((2**11) + (2**16)), or 67584.
+
+                   The powers of 2 assigned to the capabilities are
+                   these:
+
+                   Power  Capability
+                     0      other or unknown
+                     1      AUI
+                     2      10BASE-5
+                     3      FOIRL
+                     4      10BASE-2
+                     5      10BASE-T duplex mode unknown
+                     6      10BASE-FP
+                     7      10BASE-FB
+                     8      10BASE-FL duplex mode unknown
+                     9      10BROAD36
+                    10      10BASE-T  half duplex mode
+                    11      10BASE-T  full duplex mode
+                    12      10BASE-FL half duplex mode
+                    13      10BASE-FL full duplex mode
+                    14      100BASE-T4
+                    15      100BASE-TX half duplex mode
+                    16      100BASE-TX full duplex mode
+                    17      100BASE-FX half duplex mode
+                    18      100BASE-FX full duplex mode
+                    19      100BASE-T2 half duplex mode
+
+                    20      100BASE-T2 full duplex mode
+
+                   If auto-negotiation is present on this MAU, this
+                   object will map to ifMauAutoNegCapability."
+       ::= { ifMauEntry 10 }
+
+   ifMauDefaultType OBJECT-TYPE
+       SYNTAX      AutonomousType
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "This object identifies the default
+                   administrative baseband MAU type to be used in
+                   conjunction with the operational MAU type
+                   denoted by ifMauType.
+
+                   The set of possible values for this object is
+                   the same as the set defined for the ifMauType
+                   object.
+
+                   This object represents the
+                   administratively-configured type of the MAU.  If
+                   auto-negotiation is not enabled or is not
+                   implemented for this MAU, the value of this
+                   object determines the operational type of the
+                   MAU.  In this case, a set to this object will
+                   force the MAU into the specified operating mode.
+
+                   If auto-negotiation is implemented and enabled
+                   for this MAU, the operational type of the MAU
+                   is determined by auto-negotiation, and the value
+                   of this object denotes the type to which the MAU
+                   will automatically revert if/when
+                   auto-negotiation is later disabled.
+
+                   NOTE TO IMPLEMENTORS:  It may be necessary to
+                   provide for underlying hardware implementations
+                   which do not follow the exact behavior specified
+                   above.  In particular, when
+                   ifMauAutoNegAdminStatus transitions from enabled
+                   to disabled, the agent implementation MUST
+                   ensure that the operational type of the MAU (as
+                   reported by ifMauType) correctly transitions to
+                   the value specified by this object, rather than
+                   continuing to operate at the value earlier
+                   determined by the auto-negotiation function."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.1, aMAUID, and 22.2.4.1.4."
+       ::= { ifMauEntry 11 }
+
+   ifMauAutoNegSupported OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "This object indicates whether or not
+                   auto-negotiation is supported on this MAU."
+       ::= { ifMauEntry 12 }
+
+   ifMauTypeListBits OBJECT-TYPE
+       SYNTAX      IANAifMauTypeListBits
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A value that uniquely identifies the set of
+                   possible IEEE 802.3 types that the MAU could be.
+                   If auto-negotiation is present on this MAU, this
+                   object will map to ifMauAutoNegCapabilityBits.
+
+                   Note that this MAU may be capable of operating
+                   as a MAU type that is beyond the scope of this
+                   MIB.  This is indicated by returning the
+                   bit value bOther in addition to any bit values
+                   for standard capabilities that are listed in the
+                   IANAifMauTypeListBits TC."
+       ::= { ifMauEntry 13 }
+
+   ifMauHCFalseCarriers OBJECT-TYPE
+       SYNTAX      Counter64
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A count of the number of false carrier events
+                   during IDLE in 100BASE-X and 1000BASE-X links.
+
+                   For all other MAU types, this counter will
+                   always indicate zero.  This counter does not
+                   increment at the symbol rate.
+
+                   This counter is a 64-bit version of
+                   ifMauFalseCarriers.  Since the 32-bit version of
+                   this counter can roll over very quickly,
+                   management stations are advised to poll the
+                   64-bit version instead, in order to avoid loss
+                   of information.
+
+                   Discontinuities in the value of this counter can
+                   occur at re-initialization of the management
+                   system and at other times, as indicated by the
+                   value of ifCounterDiscontinuityTime."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.
+
+                   RFC 2863, ifCounterDiscontinuityTime."
+       ::= { ifMauEntry 14 }
+
+   -- The ifJackTable applies to MAUs attached to interfaces
+   -- which have one or more external jacks (connectors).
+
+   ifJackTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF IfJackEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "Information about the external jacks attached
+                   to MAUs attached to an interface."
+       ::= { dot3IfMauBasicGroup 2 }
+
+   ifJackEntry OBJECT-TYPE
+       SYNTAX      IfJackEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "An entry in the table, containing information
+                   about a particular jack."
+       INDEX       { ifMauIfIndex,
+                     ifMauIndex,
+                     ifJackIndex
+                   }
+       ::= { ifJackTable 1 }
+
+   IfJackEntry ::=
+       SEQUENCE {
+           ifJackIndex                         Integer32,
+           ifJackType                          IANAifJackType
+       }
+
+   ifJackIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "This variable uniquely identifies the jack
+                   described by this entry from among other jacks
+                   attached to the same MAU."
+       ::= { ifJackEntry 1 }
+
+   ifJackType OBJECT-TYPE
+       SYNTAX      IANAifJackType
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "The jack connector type, as it appears on the
+                   outside of the system."
+       ::= { ifJackEntry 2 }
+
+   --
+   -- The MAU Auto-Negotiation Table
+   --
+
+   ifMauAutoNegTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF IfMauAutoNegEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "Configuration and status objects for the
+                   auto-negotiation function of MAUs attached to
+                   interfaces.
+
+                   The ifMauAutoNegTable applies to systems in
+                   which auto-negotiation is supported on one or
+                   more MAUs attached to interfaces.  Note that if
+                   auto-negotiation is present and enabled, the
+                   ifMauType object reflects the result of the
+                   auto-negotiation function."
+       ::= { dot3IfMauAutoNegGroup 1 }
+
+   ifMauAutoNegEntry OBJECT-TYPE
+       SYNTAX      IfMauAutoNegEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION "An entry in the table, containing configuration
+                   and status information for the auto-negotiation
+                   function of a particular MAU."
+       INDEX       { ifMauIfIndex,
+                     ifMauIndex
+                   }
+       ::= { ifMauAutoNegTable 1 }
+
+   IfMauAutoNegEntry ::=
+       SEQUENCE {
+           ifMauAutoNegAdminStatus           INTEGER,
+           ifMauAutoNegRemoteSignaling       INTEGER,
+           ifMauAutoNegConfig                INTEGER,
+           ifMauAutoNegCapability            Integer32,
+           ifMauAutoNegCapAdvertised         Integer32,
+           ifMauAutoNegCapReceived           Integer32,
+           ifMauAutoNegRestart               INTEGER,
+           ifMauAutoNegCapabilityBits        IANAifMauAutoNegCapBits,
+           ifMauAutoNegCapAdvertisedBits     IANAifMauAutoNegCapBits,
+           ifMauAutoNegCapReceivedBits       IANAifMauAutoNegCapBits,
+           ifMauAutoNegRemoteFaultAdvertised INTEGER,
+           ifMauAutoNegRemoteFaultReceived   INTEGER
+       }
+
+   ifMauAutoNegAdminStatus OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       enabled(1),
+                       disabled(2)
+                   }
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "Setting this object to enabled(1) will cause
+                   the interface that has the auto-negotiation
+                   signaling ability to be enabled.
+
+                   If the value of this object is disabled(2) then
+                   the interface will act as it would if it had no
+                   auto-negotiation signaling.  Under these
+                   conditions, an IEEE 802.3 MAU will immediately
+                   be forced to the state indicated by the value of
+                   the object ifMauDefaultType.
+
+                   NOTE TO IMPLEMENTORS:  When
+                   ifMauAutoNegAdminStatus transitions from enabled
+                   to disabled, the agent implementation MUST
+                   ensure that the operational type of the MAU (as
+                   reported by ifMauType) correctly transitions to
+                   the value specified by the ifMauDefaultType
+                   object, rather than continuing to operate at the
+                   value earlier determined by the auto-negotiation
+                   function."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.2, aAutoNegAdminState,
+                   and 30.6.1.2.2, acAutoNegAdminControl."
+       ::= { ifMauAutoNegEntry 1 }
+
+   ifMauAutoNegRemoteSignaling OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       detected(1),
+                       notdetected(2)
+                   }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A value indicating whether the remote end of
+                   the link is using auto-negotiation signaling.  It
+                   takes the value detected(1) if and only if,
+                   during the previous link negotiation, FLP Bursts
+                   were received."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.3,
+                   aAutoNegRemoteSignaling."
+       ::= { ifMauAutoNegEntry 2 }
+
+   ifMauAutoNegConfig OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       other(1),
+                       configuring(2),
+                       complete(3),
+                       disabled(4),
+                       parallelDetectFail(5)
+                   }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A value indicating the current status of the
+                   auto-negotiation process.  The enumeration
+                   parallelDetectFail(5) maps to a failure in
+                   parallel detection as defined in 28.2.3.1 of
+                   [IEEE802.3]."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.4, aAutoNegAutoConfig."
+       ::= { ifMauAutoNegEntry 4 }
+
+   ifMauAutoNegCapability OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This object has been deprecated in favour of
+                   ifMauAutoNegCapabilityBits.
+
+                   A value that uniquely identifies the set of
+                   capabilities of the local auto-negotiation
+                   entity.  The value is a sum that initially
+                   takes the value zero.  Then, for each capability
+                   of this interface, 2 raised to the power noted
+                   below is added to the sum.  For example, an
+                   interface that has the capability to support
+                   only 100Base-TX half duplex would have a value
+                   of 32768 (2**15).  In contrast, an interface
+                   that supports both 100Base-TX half duplex and
+                   100Base-TX full duplex would have a value of
+                   98304 ((2**15) + (2**16)).
+
+                   The powers of 2 assigned to the capabilities are
+                   these:
+
+                   Power   Capability
+                     0       other or unknown
+                    (1-9)    (reserved)
+                    10       10BASE-T  half duplex mode
+                    11       10BASE-T  full duplex mode
+                    12       (reserved)
+
+                    13       (reserved)
+                    14       100BASE-T4
+                    15       100BASE-TX half duplex mode
+                    16       100BASE-TX full duplex mode
+                    17       (reserved)
+                    18       (reserved)
+                    19      100BASE-T2 half duplex mode
+                    20      100BASE-T2 full duplex mode
+
+                   Note that interfaces that support this MIB may
+                   have capabilities that extend beyond the scope
+                   of this MIB."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.5,
+                   aAutoNegLocalTechnologyAbility."
+       ::= { ifMauAutoNegEntry 5 }
+
+   ifMauAutoNegCapAdvertised OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-write
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This object has been deprecated in favour of
+                   ifMauAutoNegCapAdvertisedBits.
+
+                   A value that uniquely identifies the set of
+                   capabilities advertised by the local
+                   auto-negotiation entity. Refer to
+                   ifMauAutoNegCapability for a description of the
+                   possible values of this object.
+
+                   Capabilities in this object that are not
+                   available in ifMauAutoNegCapability cannot be
+                   enabled."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.6,
+                   aAutoNegAdvertisedTechnologyAbility."
+       ::= { ifMauAutoNegEntry 6 }
+
+   ifMauAutoNegCapReceived OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This object has been deprecated in favour of
+                   ifMauAutoNegCapReceivedBits.
+
+                   A value that uniquely identifies the set of
+
+                   capabilities received from the remote
+                   auto-negotiation entity. Refer to
+                   ifMauAutoNegCapability for a description of the
+                   possible values of this object.
+
+                   Note that interfaces that support this MIB may
+                   be attached to remote auto-negotiation entities
+                   that have capabilities beyond the scope of this
+                   MIB."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.7,
+                   aAutoNegReceivedTechnologyAbility."
+       ::= { ifMauAutoNegEntry 7 }
+
+   ifMauAutoNegRestart OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       restart(1),
+                       norestart(2)
+                   }
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "If the value of this object is set to
+                   restart(1) then this will force auto-negotiation
+                   to begin link renegotiation.  If auto-negotiation
+                   signaling is disabled, a write to this object
+                   has no effect.
+                   Setting the value of this object to norestart(2)
+                   has no effect."
+       REFERENCE   "[IEEE802.3], 30.6.1.2.1,
+                   acAutoNegRestartAutoConfig."
+       ::= { ifMauAutoNegEntry 8 }
+
+   ifMauAutoNegCapabilityBits OBJECT-TYPE
+       SYNTAX      IANAifMauAutoNegCapBits
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A value that uniquely identifies the set of
+                   capabilities of the local auto-negotiation
+                   entity.  Note that interfaces that support this
+                   MIB may have capabilities that extend beyond the
+                   scope of this MIB.
+
+                   Note that the local auto-negotiation entity may
+                   support some capabilities beyond the scope of
+                   this MIB.  This is indicated by returning the
+                   bit value bOther in addition to any bit values
+                   for standard capabilities that are listed in the
+                   IANAifMauAutoNegCapBits TC."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.5,
+                   aAutoNegLocalTechnologyAbility."
+       ::= { ifMauAutoNegEntry 9 }
+
+   ifMauAutoNegCapAdvertisedBits OBJECT-TYPE
+       SYNTAX      IANAifMauAutoNegCapBits
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "A value that uniquely identifies the set of
+                   capabilities advertised by the local
+                   auto-negotiation entity.
+
+                   Capabilities in this object that are not
+                   available in ifMauAutoNegCapabilityBits cannot
+                   be enabled.
+
+                   Note that the local auto-negotiation entity may
+                   advertise some capabilities beyond the scope of
+                   this MIB.  This is indicated by returning the
+                   bit value bOther in addition to any bit values
+                   for standard capabilities that are listed in the
+                   IANAifMauAutoNegCapBits TC."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.6,
+                   aAutoNegAdvertisedTechnologyAbility."
+       ::= { ifMauAutoNegEntry 10 }
+
+   ifMauAutoNegCapReceivedBits OBJECT-TYPE
+       SYNTAX      IANAifMauAutoNegCapBits
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A value that uniquely identifies the set of
+                   capabilities received from the remote
+                   auto-negotiation entity.
+                   Note that interfaces that support this MIB may
+                   be attached to remote auto-negotiation entities
+                   that have capabilities beyond the scope of this
+                   MIB.  This is indicated by returning the bit
+                   value bOther in addition to any bit values for
+                   standard capabilities that are listed in the
+                   IANAifMauAutoNegCapBits TC."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.7,
+                   aAutoNegReceivedTechnologyAbility."
+       ::= { ifMauAutoNegEntry 11 }
+
+   ifMauAutoNegRemoteFaultAdvertised OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       noError(1),
+                       offline(2),
+                       linkFailure(3),
+                       autoNegError(4)
+                   }
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION "A value that identifies any local fault
+                   indications that this MAU has detected and will
+                   advertise at the next auto-negotiation
+                   interaction for 1000Mbps MAUs."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.6,
+                   aAutoNegAdvertisedTechnologyAbility."
+       ::= { ifMauAutoNegEntry 12 }
+
+   ifMauAutoNegRemoteFaultReceived OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       noError(1),
+                       offline(2),
+                       linkFailure(3),
+                       autoNegError(4)
+                   }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION "A value that identifies any fault indications
+                   received from the far end of a link by the
+                   local auto-negotiation entity for 1000Mbps
+                   MAUs."
+       REFERENCE   "[IEEE802.3], 30.6.1.1.7,
+                   aAutoNegReceivedTechnologyAbility."
+       ::= { ifMauAutoNegEntry 13 }
+
+   --
+   -- The Basic Broadband MAU Table
+   --
+
+   broadMauBasicTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF BroadMauBasicEntry
+       MAX-ACCESS  not-accessible
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This entire table has been deprecated.  There
+                   have been no reported implementations of this
+                   table, and it is unlikely that there ever will
+                   be.  IEEE recommends that broadband MAU types
+                   should not be used for new installations.
+
+                   Table of descriptive and status information
+
+                   about the broadband MAUs connected to
+                   interfaces."
+       ::= { dot3BroadMauBasicGroup 1 }
+
+   broadMauBasicEntry OBJECT-TYPE
+       SYNTAX      BroadMauBasicEntry
+       MAX-ACCESS  not-accessible
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   An entry in the table, containing information
+                   about a single broadband MAU."
+       INDEX       { broadMauIfIndex,
+                     broadMauIndex
+                   }
+       ::= { broadMauBasicTable 1 }
+
+   BroadMauBasicEntry ::=
+       SEQUENCE {
+           broadMauIfIndex                     InterfaceIndex,
+           broadMauIndex                       Integer32,
+           broadMauXmtRcvSplitType             INTEGER,
+           broadMauXmtCarrierFreq              Integer32,
+           broadMauTranslationFreq             Integer32
+       }
+
+   broadMauIfIndex OBJECT-TYPE
+       SYNTAX      InterfaceIndex
+       MAX-ACCESS  read-only  -- read-only since originally an
+                              -- SMIv1 index
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This variable uniquely identifies the interface
+                   to which the MAU described by this entry is
+                   connected."
+       REFERENCE   "RFC 2863, ifIndex."
+       ::= { broadMauBasicEntry 1 }
+
+   broadMauIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  read-only  -- read-only since originally an
+                              -- SMIv1 index
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This variable uniquely identifies the MAU
+                   connected to interface broadMauIfIndex that is
+
+                   described by this entry."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.1, aMAUID."
+       ::= { broadMauBasicEntry 2 }
+
+   broadMauXmtRcvSplitType OBJECT-TYPE
+       SYNTAX      INTEGER {
+                       other(1),
+                       single(2),
+                       dual(3)
+                   }
+       MAX-ACCESS  read-only
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This object indicates the type of frequency
+                   multiplexing/cabling system used to separate the
+                   transmit and receive paths for the 10BROAD36
+                   MAU.
+
+                   The value other(1) is returned if the split type
+                   is not either single or dual.
+
+                   The value single(2) indicates a single cable
+                   system.  The value dual(3) indicates a dual
+                   cable system, offset normally zero."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.8, aBbMAUXmitRcvSplitType."
+       ::= { broadMauBasicEntry 3 }
+
+   broadMauXmtCarrierFreq OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This variable indicates the transmit carrier
+                   frequency of the 10BROAD36 MAU in MHz/4; that
+                   is, in units of 250 kHz."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.9,
+                   aBroadbandFrequencies.xmitCarrierFrequency."
+       ::= { broadMauBasicEntry 4 }
+
+   broadMauTranslationFreq OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      deprecated
+       DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
+
+                   This variable indicates the translation offset
+
+                   frequency of the 10BROAD36 MAU in MHz/4; that
+                   is, in units of 250 kHz."
+       REFERENCE   "[IEEE802.3], 30.5.1.1.9,
+                   aBroadbandFrequencies.translationFrequency."
+       ::= { broadMauBasicEntry 5 }
+
+   -- Notifications for use by 802.3 MAUs
+
+   snmpDot3MauTraps OBJECT IDENTIFIER ::= { snmpDot3MauMgt 0 }
+
+   rpMauJabberTrap NOTIFICATION-TYPE
+       OBJECTS     { rpMauJabberState }
+       STATUS      current
+       DESCRIPTION "This trap is sent whenever a managed repeater
+                   MAU enters the jabber state.
+
+                   The agent MUST throttle the generation of
+                   consecutive rpMauJabberTraps so that there is at
+                   least a five-second gap between them."
+       REFERENCE   "[IEEE802.3], 30.5.1.3.1, nJabber notification."
+       ::= { snmpDot3MauTraps 1 }
+
+   ifMauJabberTrap NOTIFICATION-TYPE
+       OBJECTS     { ifMauJabberState }
+       STATUS      current
+       DESCRIPTION "This trap is sent whenever a managed interface
+                   MAU enters the jabber state.
+
+                   The agent MUST throttle the generation of
+                   consecutive ifMauJabberTraps so that there is at
+                   least a five-second gap between them."
+       REFERENCE   "[IEEE802.3], 30.5.1.3.1, nJabber notification."
+       ::= { snmpDot3MauTraps 2 }
+
+   -- Conformance information
+
+   mauModConf
+           OBJECT IDENTIFIER ::= { mauMod 1 }
+     mauModCompls
+           OBJECT IDENTIFIER ::= { mauModConf 1 }
+     mauModObjGrps
+           OBJECT IDENTIFIER ::= { mauModConf 2 }
+     mauModNotGrps
+           OBJECT IDENTIFIER ::= { mauModConf 3 }
+
+   -- Object groups
+
+   mauRpGrpBasic OBJECT-GROUP
+       OBJECTS     { rpMauGroupIndex,
+                     rpMauPortIndex,
+                     rpMauIndex,
+                     rpMauType,
+                     rpMauStatus,
+                     rpMauMediaAvailable,
+                     rpMauMediaAvailableStateExits,
+                     rpMauJabberState,
+                     rpMauJabberingStateEnters
+                   }
+       STATUS      current
+       DESCRIPTION "Basic conformance group for MAUs attached to
+                   repeater ports.  This group is also the
+                   conformance specification for RFC 1515
+                   implementations."
+       ::= { mauModObjGrps 1 }
+
+   mauRpGrp100Mbs OBJECT-GROUP
+       OBJECTS     { rpMauFalseCarriers }
+       STATUS      current
+       DESCRIPTION "Conformance group for MAUs attached to
+                   repeater ports with 100 Mb/s or greater
+                   capability."
+       ::= { mauModObjGrps 2 }
+
+   mauRpGrpJack OBJECT-GROUP
+       OBJECTS     { rpJackType }
+       STATUS      current
+       DESCRIPTION "Conformance group for MAUs attached to
+                   repeater ports with managed jacks."
+       ::= { mauModObjGrps 3 }
+
+   mauIfGrpBasic OBJECT-GROUP
+       OBJECTS     { ifMauIfIndex,
+                     ifMauIndex,
+                     ifMauType,
+                     ifMauStatus,
+                     ifMauMediaAvailable,
+                     ifMauMediaAvailableStateExits,
+                     ifMauJabberState,
+                     ifMauJabberingStateEnters
+                   }
+       STATUS      current
+       DESCRIPTION "Basic conformance group for MAUs attached to
+                   interfaces.  This group also provides a
+                   conformance specification for RFC 1515
+                   implementations."
+       ::= { mauModObjGrps 4 }
+
+   mauIfGrp100Mbs OBJECT-GROUP
+       OBJECTS     { ifMauFalseCarriers,
+                     ifMauTypeList,
+                     ifMauDefaultType,
+                     ifMauAutoNegSupported
+                   }
+       STATUS      deprecated
+       DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+                   Conformance group for MAUs attached to
+                   interfaces with 100 Mb/s capability.
+
+                   This object group has been deprecated in favor
+                   of mauIfGrpHighCapacity."
+       ::= { mauModObjGrps 5 }
+
+   mauIfGrpJack OBJECT-GROUP
+       OBJECTS     { ifJackType }
+       STATUS      current
+       DESCRIPTION "Conformance group for MAUs attached to
+                   interfaces with managed jacks."
+       ::= { mauModObjGrps 6 }
+
+   mauIfGrpAutoNeg OBJECT-GROUP
+       OBJECTS     { ifMauAutoNegAdminStatus,
+                     ifMauAutoNegRemoteSignaling,
+                     ifMauAutoNegConfig,
+                     ifMauAutoNegCapability,
+                     ifMauAutoNegCapAdvertised,
+                     ifMauAutoNegCapReceived,
+                     ifMauAutoNegRestart
+                   }
+       STATUS      deprecated
+       DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+
+                   Conformance group for MAUs attached to
+                   interfaces with managed auto-negotiation.
+
+                   This object group has been deprecated in favor
+                   of mauIfGrpAutoNeg2."
+       ::= { mauModObjGrps 7 }
+
+   mauBroadBasic OBJECT-GROUP
+       OBJECTS     { broadMauIfIndex,
+                     broadMauIndex,
+                     broadMauXmtRcvSplitType,
+                     broadMauXmtCarrierFreq,
+                     broadMauTranslationFreq
+                   }
+       STATUS      deprecated
+       DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
+                   Conformance group for broadband MAUs attached
+                   to interfaces.
+
+                   This object group is deprecated.  There have
+                   been no reported implementations of this group,
+                   and it was felt to be unlikely that there will
+                   be any future implementations."
+       ::= { mauModObjGrps 8 }
+
+   mauIfGrpHighCapacity OBJECT-GROUP
+       OBJECTS     { ifMauFalseCarriers,
+                     ifMauTypeListBits,
+                     ifMauDefaultType,
+                     ifMauAutoNegSupported
+                   }
+       STATUS      current
+       DESCRIPTION "Conformance group for MAUs attached to
+                   interfaces with 100 Mb/s or greater capability."
+       ::= { mauModObjGrps 9 }
+
+   mauIfGrpAutoNeg2 OBJECT-GROUP
+       OBJECTS     { ifMauAutoNegAdminStatus,
+                     ifMauAutoNegRemoteSignaling,
+                     ifMauAutoNegConfig,
+                     ifMauAutoNegCapabilityBits,
+                     ifMauAutoNegCapAdvertisedBits,
+                     ifMauAutoNegCapReceivedBits,
+                     ifMauAutoNegRestart
+                   }
+       STATUS      current
+       DESCRIPTION "Conformance group for MAUs attached to
+                   interfaces with managed auto-negotiation."
+       ::= { mauModObjGrps 10 }
+
+   mauIfGrpAutoNeg1000Mbps OBJECT-GROUP
+       OBJECTS     { ifMauAutoNegRemoteFaultAdvertised,
+                     ifMauAutoNegRemoteFaultReceived
+                   }
+       STATUS      current
+       DESCRIPTION "Conformance group for 1000Mbps MAUs attached to
+                   interfaces with managed auto-negotiation."
+       ::= { mauModObjGrps 11 }
+
+   mauIfGrpHCStats OBJECT-GROUP
+       OBJECTS     { ifMauHCFalseCarriers }
+       STATUS      current
+       DESCRIPTION "Conformance for high capacity statistics for
+                   MAUs attached to interfaces."
+       ::= { mauModObjGrps 12 }
+
+   -- Notification groups
+
+   rpMauNotifications NOTIFICATION-GROUP
+       NOTIFICATIONS { rpMauJabberTrap }
+       STATUS      current
+       DESCRIPTION "Notifications for repeater MAUs."
+       ::= { mauModNotGrps 1 }
+
+   ifMauNotifications NOTIFICATION-GROUP
+       NOTIFICATIONS { ifMauJabberTrap }
+       STATUS      current
+       DESCRIPTION "Notifications for interface MAUs."
+       ::= { mauModNotGrps 2 }
+
+   -- Compliances
+
+   mauModRpCompl MODULE-COMPLIANCE
+       STATUS      deprecated
+       DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+                   Compliance for MAUs attached to repeater
+                   ports.
+
+                   This compliance is deprecated and replaced by
+                   mauModRpCompl2, which corrects an oversight by
+                   allowing rpMauStatus to be implemented
+                   read-only."
+
+       MODULE -- this module
+           MANDATORY-GROUPS { mauRpGrpBasic }
+
+           GROUP       mauRpGrp100Mbs
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have 100Mb/s or
+                       greater capability."
+
+           GROUP       mauRpGrpJack
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have one or more
+                       external jacks."
+
+           GROUP       rpMauNotifications
+           DESCRIPTION "Implementation of this group is recommended
+                       for MAUs attached to repeater ports."
+       ::= { mauModCompls 1 }
+
+   mauModIfCompl MODULE-COMPLIANCE
+       STATUS      deprecated
+       DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+                   Compliance for MAUs attached to interfaces.
+                   This compliance is deprecated and replaced by
+                   mauModIfCompl2."
+
+       MODULE -- this module
+           MANDATORY-GROUPS { mauIfGrpBasic }
+
+           GROUP       mauIfGrp100Mbs
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have 100Mb/s
+                       capability."
+
+           GROUP       mauIfGrpJack
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have one or more
+                       external jacks."
+
+           GROUP       mauIfGrpAutoNeg
+           DESCRIPTION "Implementation of this group is mandatory
+                       for MAUs that support managed
+                       auto-negotiation."
+
+           GROUP       mauBroadBasic
+           DESCRIPTION "Implementation of this group is mandatory
+                       for broadband MAUs."
+
+           GROUP       ifMauNotifications
+           DESCRIPTION "Implementation of this group is recommended
+                       for MAUs attached to interfaces."
+       ::= { mauModCompls 2 }
+
+   mauModIfCompl2 MODULE-COMPLIANCE
+       STATUS      deprecated
+       DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
+
+                   Compliance for MAUs attached to interfaces.
+
+                   This compliance is deprecated and replaced by
+                   mauModIfCompl3."
+
+       MODULE -- this module
+           MANDATORY-GROUPS { mauIfGrpBasic }
+
+           GROUP       mauIfGrpHighCapacity
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have 100Mb/s
+                       or greater capability."
+
+           GROUP       mauIfGrpJack
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have one or more
+                       external jacks."
+
+           GROUP       mauIfGrpAutoNeg2
+           DESCRIPTION "Implementation of this group is mandatory
+                       for MAUs that support managed
+                       auto-negotiation."
+
+           GROUP       mauIfGrpAutoNeg1000Mbps
+           DESCRIPTION "Implementation of this group is mandatory
+                       for MAUs that have 1000Mb/s or greater
+                       capability and support managed
+                       auto-negotiation."
+
+           GROUP       ifMauNotifications
+           DESCRIPTION "Implementation of this group is recommended
+                       for MAUs attached to interfaces."
+
+           OBJECT      ifMauStatus
+           MIN-ACCESS  read-only
+           DESCRIPTION "Write access is not required."
+       ::= { mauModCompls 3 }
+
+   mauModRpCompl2 MODULE-COMPLIANCE
+       STATUS      current
+       DESCRIPTION "Compliance for MAUs attached to repeater
+                   ports.
+
+                   Note that compliance with this compliance
+                   statement requires compliance with the
+                   snmpRptrModCompl MODULE-COMPLIANCE statement of
+                   the SNMP-REPEATER-MIB (RFC 2108)."
+
+       MODULE -- this module
+           MANDATORY-GROUPS { mauRpGrpBasic }
+
+           GROUP       mauRpGrp100Mbs
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have 100Mb/s or
+                       greater capability."
+
+           GROUP       mauRpGrpJack
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have one or more
+                       external jacks."
+
+           GROUP       rpMauNotifications
+           DESCRIPTION "Implementation of this group is recommended
+                       for MAUs attached to repeater ports."
+
+           OBJECT      rpMauStatus
+           MIN-ACCESS  read-only
+           DESCRIPTION "Write access is not required."
+       ::= { mauModCompls 4 }
+
+   mauModIfCompl3 MODULE-COMPLIANCE
+       STATUS      current
+       DESCRIPTION "Compliance for MAUs attached to interfaces.
+
+                   Note that compliance with this compliance
+                   statement requires compliance with the
+                   ifCompliance3 MODULE-COMPLIANCE statement of the
+                   IF-MIB (RFC 2863) and the dot3Compliance2
+                   MODULE-COMPLIANCE statement of the
+                   EtherLike-MIB (RFC3635)."
+
+       MODULE -- this module
+           MANDATORY-GROUPS { mauIfGrpBasic }
+
+           GROUP       mauIfGrpHighCapacity
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have 100Mb/s
+                       or greater capability."
+
+           GROUP       mauIfGrpHCStats
+           DESCRIPTION "Implementation of this group is mandatory
+                       for MAUs that have 1000Mb/s capacity, and
+                       is recommended for MAUs that have 100Mb/s
+                       capacity."
+
+           GROUP       mauIfGrpJack
+           DESCRIPTION "Implementation of this optional group is
+                       recommended for MAUs that have one or more
+                       external jacks."
+
+           GROUP       mauIfGrpAutoNeg2
+           DESCRIPTION "Implementation of this group is mandatory
+                       for MAUs that support managed
+                       auto-negotiation."
+           GROUP       mauIfGrpAutoNeg1000Mbps
+           DESCRIPTION "Implementation of this group is mandatory
+                       for MAUs that have 1000Mb/s or greater
+                       capability and support managed
+                       auto-negotiation."
+
+           GROUP       ifMauNotifications
+           DESCRIPTION "Implementation of this group is recommended
+                       for MAUs attached to interfaces."
+
+           OBJECT      ifMauStatus
+           MIN-ACCESS  read-only
+           DESCRIPTION "Write access is not required."
+       ::= { mauModCompls 5 }
+
+END
diff --git a/snmp_builder/mibs/MGMD-STD-MIB.mib b/snmp_builder/mibs/MGMD-STD-MIB.mib
new file mode 100644
index 0000000..81c2ccd
--- /dev/null
+++ b/snmp_builder/mibs/MGMD-STD-MIB.mib
@@ -0,0 +1,1524 @@
+MGMD-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2, Counter32, Gauge32,
+    Unsigned32, TimeTicks            FROM SNMPv2-SMI
+    InetAddress, InetAddressType     FROM INET-ADDRESS-MIB
+    RowStatus                        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF
+    InterfaceIndexOrZero,
+    InterfaceIndex                   FROM IF-MIB;
+
+mgmdStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200903300000Z" -- March 30, 2009
+    ORGANIZATION "INTERNET ENGINEERING TASK FORCE MULTICAST and
+    ANYCAST GROUP MEMBERSHIP Working
+        Group.
+        www:   http://www.ietf.org/html.charters/magma-charter.html
+        EMail: magma@ietf.org"
+    CONTACT-INFO
+        "Julian Chesterfield
+        University of Cambridge,
+        Computer Laboratory,
+        15 JJ Thompson Avenue,
+        Cambridge,
+        CB3 0FD
+        UK
+
+        EMail: julian.chesterfield@cl.cam.ac.uk"
+    DESCRIPTION
+        "The MIB module for MGMD management.
+        A new version of MGMD combining RFC 2933 and RFC 3019.
+        Includes IGMPv3 and MLDv2 source filtering changes.
+
+        Copyright (c) 2009 IETF Trust and the persons
+        identified as authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, are permitted provided that the
+        following conditions are met:
+
+        - Redistributions of source code must retain the above copyright
+          notice, this list of conditions and the following disclaimer.
+
+        - Redistributions in binary form must reproduce the above
+          copyright notice, this list of conditions and the following
+          disclaimer in the documentation and/or other materials
+          provided with the distribution.
+
+        - Neither the name of Internet Society, IETF or IETF Trust,
+          nor the names of specific contributors, may be used to endorse
+          or promote products derived from this software without
+          specific prior written permission.
+
+        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+        CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+        INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+        MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+        DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+        CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+        SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+        NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+        LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+        HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+        CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+        OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+        EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+        This version of this MIB module is part of RFC 5519;
+        see the RFC itself for full legal notices."
+
+    REVISION "200903300000Z" -- March 30, 2009
+    DESCRIPTION
+        "This MIB obsoletes both RFC 2933 and RFC 3019."
+    ::= { mib-2 185 }
+
+mgmdMIBObjects     OBJECT IDENTIFIER ::= { mgmdStdMIB 1 }
+
+--
+--  The MGMD Host Interface Table
+--
+
+mgmdHostInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdHostInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interfaces on which
+             IGMP or MLD is enabled."
+    ::= { mgmdMIBObjects 1 }
+
+mgmdHostInterfaceEntry OBJECT-TYPE
+    SYNTAX     MgmdHostInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) representing an interface on
+            which IGMP or MLD is enabled."
+    INDEX      { mgmdHostInterfaceIfIndex,
+                 mgmdHostInterfaceQuerierType }
+    ::= { mgmdHostInterfaceTable 1 }
+
+MgmdHostInterfaceEntry ::= SEQUENCE {
+    mgmdHostInterfaceIfIndex               InterfaceIndex,
+    mgmdHostInterfaceQuerierType           InetAddressType,
+    mgmdHostInterfaceQuerier               InetAddress,
+    mgmdHostInterfaceStatus                RowStatus,
+    mgmdHostInterfaceVersion               Unsigned32,
+    mgmdHostInterfaceVersion1QuerierTimer  TimeTicks,
+    mgmdHostInterfaceVersion2QuerierTimer  TimeTicks,
+    mgmdHostInterfaceVersion3Robustness    Unsigned32
+}
+
+mgmdHostInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for which IGMP or MLD is
+             enabled.  The table is indexed by the ifIndex value and the
+             InetAddressType to allow for interfaces that may be
+             configured in both IPv4 and IPv6 modes."
+    ::= { mgmdHostInterfaceEntry 1 }
+
+mgmdHostInterfaceQuerierType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of this interface.  This entry along with
+             the ifIndex value acts as an index to the mgmdHostInterface
+             table.  A physical interface may be configured in multiple
+             modes concurrently, e.g., in IPv4 and IPv6 modes connected
+             to the same interface; however, the traffic is considered
+             to be logically separate."
+    ::= { mgmdHostInterfaceEntry 2 }
+
+mgmdHostInterfaceQuerier OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(4|16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the IGMP or MLD Querier on the IP subnet to
+             which this interface is attached.  The InetAddressType,
+             e.g., IPv4 or IPv6, is identified by the
+             mgmdHostInterfaceQuerierType variable in the
+             mgmdHostInterface table."
+    ::= { mgmdHostInterfaceEntry 3 }
+
+mgmdHostInterfaceStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The activation of a row enables the host side of IGMP or
+            MLD on the interface.  The destruction of a row disables
+            the host side of IGMP or MLD on the interface."
+    ::= { mgmdHostInterfaceEntry 4 }
+
+mgmdHostInterfaceVersion OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..3)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum version of MGMD that the host can run on
+            this interface.  A value of 1 is only applicable for IPv4,
+            and indicates that the host only supports IGMPv1 on the
+
+            interface.  A value of 2 indicates that the host also
+            supports IGMPv2 (for IPv4) or MLDv1 (for IPv6).  A value of
+            3 indicates that the host also supports IGMPv3 (for IPv4)
+            or MLDv2 (for IPv6)."
+    DEFVAL     { 3 }
+    ::= { mgmdHostInterfaceEntry 5 }
+
+mgmdHostInterfaceVersion1QuerierTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining until the host assumes that there are
+            no IGMPv1 routers present on the interface.  While this is
+            non-zero, the host will reply to all queries with version 1
+            membership reports.  This variable applies to IGMPv2 or 3
+            hosts that are forced to run in v1 for compatibility with
+            v1 routers present on the interface.  This object may only
+            be present when the corresponding value of
+            mgmdHostInterfaceQuerierType is ipv4."
+    REFERENCE "RFC 2236, Section 4 and RFC 3376, Section 7.2.1"
+    DEFVAL     { 0 }
+    ::= { mgmdHostInterfaceEntry 6 }
+
+mgmdHostInterfaceVersion2QuerierTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining until the host assumes that there are
+            no MGMDv2 routers present on the interface.  While this is
+            non-zero, the host will reply to all queries with version 1
+            or 2 membership reports.  This variable applies to MGMDv3
+            hosts that are forced to run in v2 for compatibility with
+            v2 hosts or routers present on the interface."
+    REFERENCE "RFC 3376, Section 7.2.1 and RFC 3810, Section 8.2.1"
+    DEFVAL     { 0 }
+    ::= { mgmdHostInterfaceEntry 7 }
+
+mgmdHostInterfaceVersion3Robustness OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The robustness variable utilised by an MGMDv3 host in
+            sending state-change reports for multicast routers.  To
+            ensure the state-change report is not missed, the host
+            retransmits the state-change report
+            [mgmdHostInterfaceVersion3Robustness - 1] times.  The
+            variable must be a non-zero value."
+    REFERENCE "RFC 3376, Section 8.1 and RFC 3810, Section 9.14.1"
+    DEFVAL     { 2 }
+    ::= { mgmdHostInterfaceEntry 8 }
+
+--
+--  The MGMD Router Interface Table
+--
+
+mgmdRouterInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdRouterInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interfaces on which
+            IGMP or MLD is enabled."
+    ::= { mgmdMIBObjects 2 }
+
+mgmdRouterInterfaceEntry OBJECT-TYPE
+    SYNTAX     MgmdRouterInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) representing an interface on
+            which IGMP or MLD is enabled."
+    INDEX      { mgmdRouterInterfaceIfIndex,
+                 mgmdRouterInterfaceQuerierType }
+    ::= { mgmdRouterInterfaceTable 1 }
+
+MgmdRouterInterfaceEntry ::= SEQUENCE {
+    mgmdRouterInterfaceIfIndex                 InterfaceIndex,
+    mgmdRouterInterfaceQuerierType             InetAddressType,
+    mgmdRouterInterfaceQuerier                 InetAddress,
+    mgmdRouterInterfaceQueryInterval           Unsigned32,
+    mgmdRouterInterfaceStatus                  RowStatus,
+    mgmdRouterInterfaceVersion                 Unsigned32,
+    mgmdRouterInterfaceQueryMaxResponseTime    Unsigned32,
+    mgmdRouterInterfaceQuerierUpTime           TimeTicks,
+    mgmdRouterInterfaceQuerierExpiryTime       TimeTicks,
+    mgmdRouterInterfaceWrongVersionQueries     Counter32,
+    mgmdRouterInterfaceJoins                   Counter32,
+    mgmdRouterInterfaceProxyIfIndex            InterfaceIndexOrZero,
+    mgmdRouterInterfaceGroups                  Gauge32,
+    mgmdRouterInterfaceRobustness              Unsigned32,
+    mgmdRouterInterfaceLastMemberQueryInterval Unsigned32,
+    mgmdRouterInterfaceLastMemberQueryCount    Unsigned32,
+    mgmdRouterInterfaceStartupQueryCount       Unsigned32,
+    mgmdRouterInterfaceStartupQueryInterval    Unsigned32
+}
+
+mgmdRouterInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of the interface for which IGMP or MLD
+            is enabled.  The table is indexed by the ifIndex value and
+            the InetAddressType to allow for interfaces that may be
+            configured in both IPv4 and IPv6 modes."
+    ::= { mgmdRouterInterfaceEntry 1 }
+
+mgmdRouterInterfaceQuerierType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of this interface.  This entry along with
+            the ifIndex value acts as the index to the
+            mgmdRouterInterface table.  A physical interface may be
+            configured in multiple modes concurrently, e.g., in IPv4
+            and IPv6 modes connected to the same interface; however,
+            the traffic is considered to be logically separate."
+    ::= { mgmdRouterInterfaceEntry 2 }
+
+mgmdRouterInterfaceQuerier OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(4|16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the IGMP or MLD Querier on the IP subnet to
+            which this interface is attached.  The InetAddressType,
+            e.g., IPv4 or IPv6, is identified by the
+            mgmdRouterInterfaceQuerierType variable in the
+            mgmdRouterInterface table."
+    ::= { mgmdRouterInterfaceEntry 3 }
+
+mgmdRouterInterfaceQueryInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..31744)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which IGMP or MLD Host-Query packets are
+            transmitted on this interface."
+    DEFVAL     { 125 }
+    ::= { mgmdRouterInterfaceEntry 4 }
+
+mgmdRouterInterfaceStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The activation of a row enables the router side of IGMP or
+            MLD on the interface.  The destruction of a row disables
+            the router side of IGMP or MLD on the interface."
+    ::= { mgmdRouterInterfaceEntry 5 }
+
+mgmdRouterInterfaceVersion OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..3)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The version of MGMD that is running on this interface.
+            Value 1 applies to IGMPv1 routers only.  Value 2 applies
+            to IGMPv2 and MLDv1 routers, and value 3 applies to IGMPv3
+            and MLDv2 routers.
+
+            This object can be used to configure a router capable of
+            running either version.  For IGMP and MLD to function
+            correctly, all routers on a LAN must be configured to run
+            the same version on that LAN."
+    DEFVAL     { 3 }
+    ::= { mgmdRouterInterfaceEntry 6 }
+
+mgmdRouterInterfaceQueryMaxResponseTime OBJECT-TYPE
+    SYNTAX     Unsigned32  (0..31744)
+    UNITS      "tenths of seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum query response interval advertised in MGMDv2
+            or IGMPv3 queries on this interface."
+    REFERENCE "RFC 3810, Section 9.3"
+    DEFVAL     { 100 }
+    ::= { mgmdRouterInterfaceEntry 7 }
+
+mgmdRouterInterfaceQuerierUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since mgmdRouterInterfaceQuerier was last
+            changed."
+    ::= { mgmdRouterInterfaceEntry 8 }
+
+mgmdRouterInterfaceQuerierExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of time remaining before the Other Querier
+            Present Timer expires.  If the local system is the querier,
+            the value of this object is zero."
+    ::= { mgmdRouterInterfaceEntry 9 }
+
+mgmdRouterInterfaceWrongVersionQueries OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of general queries received whose IGMP or MLD
+            version does not match the equivalent
+            mgmdRouterInterfaceVersion, over the lifetime of the row
+            entry.  Both IGMP and MLD require that all routers on a LAN
+            be configured to run the same version.  Thus, if any general
+            queries are received with the wrong version, this indicates
+            a configuration error."
+    ::= { mgmdRouterInterfaceEntry 10 }
+
+mgmdRouterInterfaceJoins OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times a group membership has been added on
+            this interface, that is, the number of times an entry for
+            this interface has been added to the Cache Table.  This
+            object can give an indication of the amount of activity
+            between samples over time."
+    ::= { mgmdRouterInterfaceEntry 11 }
+
+mgmdRouterInterfaceProxyIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Some devices implement a form of IGMP or MLD proxying
+            whereby memberships learned on the interface represented by
+            this row cause Host Membership Reports to be sent on the
+            interface whose ifIndex value is given by this object.
+            Such a device would implement the mgmdV2RouterBaseMIBGroup
+            only on its router interfaces (those interfaces with
+            non-zero mgmdRouterInterfaceProxyIfIndex).  Typically, the
+            value of this object is 0, indicating that no proxying is
+            being done."
+    DEFVAL     { 0 }
+    ::= { mgmdRouterInterfaceEntry 12 }
+
+mgmdRouterInterfaceGroups OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The current number of entries for this interface in the
+            mgmdRouterCacheTable."
+    ::= { mgmdRouterInterfaceEntry 13 }
+
+mgmdRouterInterfaceRobustness OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The Robustness Variable allows tuning for the expected
+            packet loss on a subnet.  If a subnet is expected to be
+            lossy, the Robustness Variable may be increased.  IGMP and
+            MLD are robust to (Robustness Variable-1) packet losses."
+    DEFVAL     { 2 }
+    ::= { mgmdRouterInterfaceEntry 14 }
+
+mgmdRouterInterfaceLastMemberQueryInterval OBJECT-TYPE
+    SYNTAX     Unsigned32  (0..31744)
+    UNITS      "tenths of seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The Last Member Query Interval is the Max Query Response
+            Interval inserted into group-specific queries sent in
+            response to leave group messages, and is also the amount
+            of time between group-specific query messages.  This value
+            may be tuned to modify the leave latency of the network.  A
+            reduced value results in reduced time to detect the loss of
+            the last member of a group.  The value of this object is
+            irrelevant if mgmdRouterInterfaceVersion is 1."
+    DEFVAL     { 10 }
+    ::= { mgmdRouterInterfaceEntry 15 }
+
+mgmdRouterInterfaceLastMemberQueryCount OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..255)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Represents the number of group-specific and group-and-
+            source-specific queries sent by the router before it assumes
+            there are no local members."
+    ::= { mgmdRouterInterfaceEntry 16 }
+
+mgmdRouterInterfaceStartupQueryCount OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..255)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Represents the number of Queries sent out on startup,
+            separated by the Startup Query Interval."
+    ::= { mgmdRouterInterfaceEntry 17 }
+
+mgmdRouterInterfaceStartupQueryInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..31744)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This variable represents the interval between General
+            Queries sent by a Querier on startup."
+    ::= { mgmdRouterInterfaceEntry 18 }
+
+--
+--  The MGMD Host Cache Table
+--
+
+mgmdHostCacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdHostCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the IP multicast groups for
+             which the host is a member on a particular interface."
+    ::= { mgmdMIBObjects 3 }
+
+mgmdHostCacheEntry OBJECT-TYPE
+    SYNTAX     MgmdHostCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the mgmdHostCacheTable."
+    INDEX      { mgmdHostCacheAddressType, mgmdHostCacheAddress,
+                 mgmdHostCacheIfIndex }
+    ::= { mgmdHostCacheTable 1 }
+
+MgmdHostCacheEntry ::= SEQUENCE {
+    mgmdHostCacheAddressType        InetAddressType,
+    mgmdHostCacheAddress            InetAddress ,
+    mgmdHostCacheIfIndex            InterfaceIndex,
+    mgmdHostCacheUpTime             TimeTicks,
+    mgmdHostCacheLastReporter       InetAddress,
+    mgmdHostCacheSourceFilterMode   INTEGER
+}
+
+mgmdHostCacheAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the mgmdHostCacheTable entry.  This
+            value applies to both the mgmdHostCacheAddress and the
+            mgmdHostCacheLastReporter entries."
+    ::= { mgmdHostCacheEntry 1 }
+
+mgmdHostCacheAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information.  The InetAddressType, e.g., IPv4 or
+            IPv6, is identified by the mgmdHostCacheAddressType variable
+            in the mgmdHostCache table."
+    ::= { mgmdHostCacheEntry 2 }
+
+mgmdHostCacheIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information
+            for an IP multicast group address."
+    ::= { mgmdHostCacheEntry 3 }
+
+mgmdHostCacheUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time elapsed since this entry was created."
+    ::= { mgmdHostCacheEntry 4 }
+
+mgmdHostCacheLastReporter OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(4|16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the source of the last membership report
+            received for this IP multicast group address on this
+            interface.  If no membership report has been received, this
+            object has a value of 0.  The InetAddressType, e.g., IPv4 or
+            IPv6, is identified by the mgmdHostCacheAddressType variable
+            in the mgmdHostCache table."
+    ::= { mgmdHostCacheEntry 5 }
+
+mgmdHostCacheSourceFilterMode OBJECT-TYPE
+    SYNTAX     INTEGER {include (1),
+                        exclude (2) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The state in which the interface is currently set.  The
+            value indicates the relevance of the corresponding source
+            list entries in the mgmdHostSecListTable for MGMDv3
+            interfaces."
+    ::= { mgmdHostCacheEntry 6 }
+
+--
+--  The MGMD Router Cache Table
+--
+
+mgmdRouterCacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdRouterCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the IP multicast groups for
+            which there are members on a particular router interface."
+    ::= { mgmdMIBObjects 4 }
+
+mgmdRouterCacheEntry OBJECT-TYPE
+    SYNTAX     MgmdRouterCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the mgmdRouterCacheTable."
+    INDEX      { mgmdRouterCacheAddressType, mgmdRouterCacheAddress,
+                 mgmdRouterCacheIfIndex }
+    ::= { mgmdRouterCacheTable 1 }
+
+MgmdRouterCacheEntry ::= SEQUENCE {
+    mgmdRouterCacheAddressType        InetAddressType,
+    mgmdRouterCacheAddress            InetAddress,
+    mgmdRouterCacheIfIndex            InterfaceIndex,
+    mgmdRouterCacheLastReporter       InetAddress,
+    mgmdRouterCacheUpTime             TimeTicks,
+    mgmdRouterCacheExpiryTime         TimeTicks,
+    mgmdRouterCacheExcludeModeExpiryTimer
+                                      TimeTicks,
+    mgmdRouterCacheVersion1HostTimer  TimeTicks,
+    mgmdRouterCacheVersion2HostTimer  TimeTicks,
+    mgmdRouterCacheSourceFilterMode   INTEGER
+}
+
+mgmdRouterCacheAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the mgmdRouterCacheTable entry.  This
+            value applies to both the mgmdRouterCacheAddress and the
+            mgmdRouterCacheLastReporter entries."
+    ::= { mgmdRouterCacheEntry 1 }
+
+mgmdRouterCacheAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information.  The InetAddressType, e.g., IPv4 or
+            IPv6, is identified by the mgmdRouterCacheAddressType
+            variable in the mgmdRouterCache table."
+    ::= { mgmdRouterCacheEntry 2 }
+
+mgmdRouterCacheIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information
+            for an IP multicast group address."
+    ::= { mgmdRouterCacheEntry 3 }
+
+mgmdRouterCacheLastReporter OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE(4|16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the source of the last membership report
+            received for this IP multicast group address on this
+            interface.  If no membership report has been received, this
+            object has the value 0.  The InetAddressType, e.g., IPv4 or
+            IPv6, is identified by the mgmdRouterCacheAddressType
+            variable in the mgmdRouterCache table."
+    ::= { mgmdRouterCacheEntry 4 }
+
+mgmdRouterCacheUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time elapsed since this entry was created."
+    ::= { mgmdRouterCacheEntry 5 }
+
+mgmdRouterCacheExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This value represents the time remaining before the Group
+            Membership Interval state expires.  The value must always be
+            greater than or equal to 1."
+    ::= { mgmdRouterCacheEntry 6 }
+
+mgmdRouterCacheExcludeModeExpiryTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This value is applicable only to MGMDv3-compatible nodes
+            and represents the time remaining before the interface
+            EXCLUDE state expires and the interface state transitions
+            to INCLUDE mode.  This value can never be greater than
+            mgmdRouterCacheExpiryTime."
+    ::= { mgmdRouterCacheEntry 7 }
+
+mgmdRouterCacheVersion1HostTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining until the local router will assume that
+            there are no longer any MGMD version 1 members on the IP
+            subnet attached to this interface.  This entry only applies
+            to IGMPv1 hosts, and is not implemented for MLD.  Upon
+            hearing any MGMDv1 Membership Report (IGMPv1 only), this
+            value is reset to the group membership timer.  While this
+
+            time remaining is non-zero, the local router ignores any
+            MGMDv2 Leave messages (IGMPv2 only) for this group that it
+            receives on this interface."
+    ::= { mgmdRouterCacheEntry 8 }
+
+mgmdRouterCacheVersion2HostTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining until the local router will assume that
+            there are no longer any MGMD version 2 members on the IP
+            subnet attached to this interface.  This entry applies to
+            both IGMP and MLD hosts.  Upon hearing any MGMDv2 Membership
+            Report, this value is reset to the group membership timer.
+            Assuming no MGMDv1 hosts have been detected, the local
+            router does not ignore any MGMDv2 Leave messages for this
+            group that it receives on this interface."
+    ::= { mgmdRouterCacheEntry 9 }
+
+mgmdRouterCacheSourceFilterMode OBJECT-TYPE
+    SYNTAX     INTEGER {include (1),
+                        exclude (2) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The current cache state, applicable to MGMDv3-compatible
+            nodes.  The value indicates whether the state is INCLUDE or
+            EXCLUDE."
+    ::= { mgmdRouterCacheEntry 10 }
+
+--
+--  The MGMD Inverse Host interface/cache lookup Table
+--
+
+mgmdInverseHostCacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdInverseHostCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interfaces that are
+            members of a particular group.  This is an inverse lookup
+            table for entries in the mgmdHostCacheTable."
+    ::= { mgmdMIBObjects 5 }
+
+mgmdInverseHostCacheEntry OBJECT-TYPE
+    SYNTAX     MgmdInverseHostCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the
+            mgmdInverseHostCacheTable."
+    INDEX      { mgmdInverseHostCacheIfIndex,
+                 mgmdInverseHostCacheAddressType,
+                 mgmdInverseHostCacheAddress}
+    ::= { mgmdInverseHostCacheTable 1 }
+
+MgmdInverseHostCacheEntry ::= SEQUENCE {
+    mgmdInverseHostCacheIfIndex            InterfaceIndex,
+    mgmdInverseHostCacheAddressType        InetAddressType,
+    mgmdInverseHostCacheAddress            InetAddress
+}
+
+mgmdInverseHostCacheIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information."
+    ::= { mgmdInverseHostCacheEntry 1 }
+
+mgmdInverseHostCacheAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the mgmdInverseHostCacheTable entry."
+    ::= { mgmdInverseHostCacheEntry 2 }
+
+mgmdInverseHostCacheAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information about an interface.  The
+            InetAddressType, e.g., IPv4 or IPv6, is identified by the
+            mgmdInverseHostCacheAddressType variable in the
+            mgmdInverseHostCache table."
+    ::= { mgmdInverseHostCacheEntry 3 }
+
+--
+--  The MGMD Inverse Router interface/cache lookup Table
+--
+
+mgmdInverseRouterCacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdInverseRouterCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interfaces that
+            are members of a particular group.  This is an inverse
+            lookup table for entries in the mgmdRouterCacheTable."
+    ::= { mgmdMIBObjects 6 }
+
+mgmdInverseRouterCacheEntry OBJECT-TYPE
+    SYNTAX     MgmdInverseRouterCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the
+            mgmdInverseRouterCacheTable."
+    INDEX      { mgmdInverseRouterCacheIfIndex,
+                 mgmdInverseRouterCacheAddressType,
+                 mgmdInverseRouterCacheAddress }
+    ::= { mgmdInverseRouterCacheTable 1 }
+
+MgmdInverseRouterCacheEntry ::= SEQUENCE {
+    mgmdInverseRouterCacheIfIndex            InterfaceIndex,
+    mgmdInverseRouterCacheAddressType        InetAddressType,
+    mgmdInverseRouterCacheAddress            InetAddress
+}
+
+mgmdInverseRouterCacheIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information
+            for an IP multicast group address."
+    ::= { mgmdInverseRouterCacheEntry 1 }
+
+mgmdInverseRouterCacheAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the mgmdInverseRouterCacheTable entry."
+    ::= { mgmdInverseRouterCacheEntry 2 }
+
+mgmdInverseRouterCacheAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information.  The InetAddressType, e.g., IPv4 or
+            IPv6, is identified by the mgmdInverseRouterCacheAddressType
+            variable in the mgmdInverseRouterCache table."
+    ::= { mgmdInverseRouterCacheEntry 3 }
+
+--
+--  The MGMD Host Source list Table
+--
+
+mgmdHostSrcListTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdHostSrcListEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the Source List entries
+             corresponding to each interface and multicast group pair
+             on a host."
+    ::= { mgmdMIBObjects 7 }
+
+mgmdHostSrcListEntry OBJECT-TYPE
+    SYNTAX     MgmdHostSrcListEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the mgmdHostSrcListTable."
+    INDEX      { mgmdHostSrcListAddressType, mgmdHostSrcListAddress,
+                 mgmdHostSrcListIfIndex, mgmdHostSrcListHostAddress }
+    ::= { mgmdHostSrcListTable 1 }
+
+MgmdHostSrcListEntry ::= SEQUENCE {
+    mgmdHostSrcListAddressType      InetAddressType,
+    mgmdHostSrcListAddress          InetAddress,
+    mgmdHostSrcListIfIndex          InterfaceIndex,
+    mgmdHostSrcListHostAddress      InetAddress,
+    mgmdHostSrcListExpire           TimeTicks
+}
+
+mgmdHostSrcListAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the InetAddress variables in this
+            table.  This value applies to the mgmdHostSrcListHostAddress
+            and mgmdHostSrcListAddress entries."
+    ::= { mgmdHostSrcListEntry 1 }
+
+mgmdHostSrcListAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information."
+    ::= { mgmdHostSrcListEntry 2 }
+
+mgmdHostSrcListIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information
+            for an IP multicast group address."
+    ::= { mgmdHostSrcListEntry 3 }
+
+mgmdHostSrcListHostAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The host address to which this entry corresponds.  The
+            mgmdHostCacheSourceFilterMode value for this group address
+            and interface indicates whether this host address is
+            included or excluded."
+    ::= { mgmdHostSrcListEntry 4 }
+
+mgmdHostSrcListExpire OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This value indicates the relevance of the SrcList entry,
+            whereby a non-zero value indicates this is an INCLUDE state
+            value, and a zero value indicates this to be an EXCLUDE
+            state value."
+    ::= { mgmdHostSrcListEntry 5 }
+
+--
+--  The MGMD Router Source list Table
+--
+
+mgmdRouterSrcListTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MgmdRouterSrcListEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the Source List entries
+            corresponding to each interface and multicast group pair on
+            a Router."
+    ::= { mgmdMIBObjects 8 }
+
+mgmdRouterSrcListEntry OBJECT-TYPE
+    SYNTAX     MgmdRouterSrcListEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the mgmdRouterSrcListTable."
+    INDEX      { mgmdRouterSrcListAddressType,
+                 mgmdRouterSrcListAddress,
+                 mgmdRouterSrcListIfIndex,
+                 mgmdRouterSrcListHostAddress }
+    ::= { mgmdRouterSrcListTable 1 }
+
+MgmdRouterSrcListEntry ::= SEQUENCE {
+    mgmdRouterSrcListAddressType    InetAddressType,
+    mgmdRouterSrcListAddress        InetAddress,
+    mgmdRouterSrcListIfIndex        InterfaceIndex,
+    mgmdRouterSrcListHostAddress    InetAddress,
+    mgmdRouterSrcListExpire         TimeTicks
+}
+
+mgmdRouterSrcListAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the InetAddress variables in this
+            table.  This value applies to the
+            mgmdRouterSrcListHostAddress and mgmdRouterSrcListAddress
+            entries."
+    ::= { mgmdRouterSrcListEntry 1 }
+
+mgmdRouterSrcListAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information."
+    ::= { mgmdRouterSrcListEntry 2 }
+
+mgmdRouterSrcListIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The interface for which this entry contains information
+            for an IP multicast group address."
+    ::= { mgmdRouterSrcListEntry 3 }
+
+mgmdRouterSrcListHostAddress OBJECT-TYPE
+    SYNTAX      InetAddress (SIZE(4|16))
+    MAX-ACCESS  not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The host address to which this entry corresponds.  The
+            mgmdRouterCacheSourceFilterMode value for this group address
+            and interface indicates whether this host address is
+            included or excluded."
+    ::= { mgmdRouterSrcListEntry 4 }
+
+mgmdRouterSrcListExpire OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This value indicates the relevance of the SrcList entry,
+            whereby a non-zero value indicates this is an INCLUDE state
+            value, and a zero value indicates this to be an EXCLUDE
+            state value."
+    ::= { mgmdRouterSrcListEntry 5 }
+
+-- conformance information
+
+mgmdMIBConformance OBJECT IDENTIFIER ::= { mgmdStdMIB 2 }
+mgmdMIBCompliance  OBJECT IDENTIFIER ::= { mgmdMIBConformance 1 }
+mgmdMIBGroups      OBJECT IDENTIFIER ::= { mgmdMIBConformance 2 }
+
+-- Protocol Version Conformance
+
+-- Read Compliance statement for IGMPv1 Hosts
+-- IGMPv1 only supports the IPv4 Address Family
+
+mgmdIgmpV1HostReadMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-only compliance statement for hosts running IGMPv1
+            [RFC1112] and implementing the MGMD MIB.  IGMPv1 hosts must
+            support the IPv4 address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdHostBaseMIBGroup }
+
+    OBJECT mgmdHostInterfaceStatus
+    SYNTAX RowStatus {active(1)}
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write or read-create access is not required and only
+             the value 'active(1)' needs to be supported."
+
+    OBJECT mgmdHostInterfaceVersion
+    SYNTAX Unsigned32 (1)
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required.  Only version 1 needs to be
+             supported."
+
+    GROUP mgmdHostExtendedMIBGroup
+    DESCRIPTION
+            "Supporting this group can be especially useful in
+             an environment with a router that does not support the
+             MGMD MIB."
+    ::= { mgmdMIBCompliance 1 }
+
+-- Read Compliance statement for IGMPv1 Routers
+-- IGMPv1 only supports the IPv4 Address Family
+
+mgmdIgmpV1RouterReadMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-only compliance statement for routers running
+            IGMPv1 [RFC1112] and implementing the MGMD MIB.  IGMPv1
+            routers only support the IPv4 address type.
+
+            Non-accessible index objects that only need IPv4
+            support are:
+
+            OBJECT mgmdRouterCacheAddressType
+            SYNTAX InetAddressType { ipv4(1) }
+
+            OBJECT mgmdRouterCacheAddress
+            SYNTAX InetAddress (SIZE(4))
+
+            OBJECT mgmdRouterInterfaceQuerierType
+            SYNTAX InetAddressType { ipv4(1) }
+
+            OBJECT mgmdInverseRouterCacheAddressType
+            SYNTAX InetAddressType { ipv4(1) }
+            "
+
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdRouterBaseMIBGroup }
+
+    OBJECT mgmdRouterCacheLastReporter
+    SYNTAX InetAddress (SIZE(4))
+    DESCRIPTION
+            "IGMPv1 routers only support IPv4 addresses."
+
+    OBJECT mgmdRouterInterfaceQuerier
+    SYNTAX InetAddress (SIZE(4))
+    DESCRIPTION
+            "IGMPv1 routers only support IPv4 addresses."
+
+    OBJECT mgmdInverseRouterCacheAddress
+    SYNTAX InetAddress (SIZE(4))
+    DESCRIPTION
+            "IGMPv1 routers only support IPv4 addresses."
+
+    OBJECT mgmdRouterInterfaceVersion
+    SYNTAX Unsigned32 (1)
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required.  Only version 1 needs to
+             be supported."
+
+    OBJECT mgmdRouterInterfaceStatus
+    SYNTAX RowStatus {active(1)}
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write or read-create access is not required and only
+             the value 'active(1)' needs to be supported."
+
+    OBJECT mgmdRouterInterfaceQueryInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+    ::= { mgmdMIBCompliance 2 }
+
+-- Write Compliance statement for IGMPv1 Routers
+-- IGMPv1 only supports the IPv4 Address Family
+
+mgmdIgmpV1RouterWriteMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-create compliance statement for routers running
+            IGMPv1 [RFC1112] and implementing the MGMD MIB.  IGMPv1
+            routers only support the IPv4 address type.
+
+            Non-accessible index objects that only need IPv4
+            support are:
+
+            OBJECT mgmdRouterCacheAddressType
+            SYNTAX InetAddressType { ipv4(1) }
+
+            OBJECT mgmdRouterCacheAddress
+            SYNTAX InetAddress (SIZE(4))
+
+            OBJECT mgmdRouterInterfaceQuerierType
+            SYNTAX InetAddressType { ipv4(1) }
+
+            OBJECT mgmdInverseRouterCacheAddressType
+            SYNTAX InetAddressType { ipv4(1) }
+            "
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdRouterBaseMIBGroup }
+
+    OBJECT mgmdRouterCacheLastReporter
+    SYNTAX InetAddress (SIZE(4))
+    DESCRIPTION
+            "Only IPv4 addresses needed for IGMPv1 router support."
+
+    OBJECT mgmdRouterInterfaceQuerier
+    SYNTAX InetAddress (SIZE(4))
+    DESCRIPTION
+            "Only IPv4 addresses needed for IGMPv1 router support."
+
+    OBJECT mgmdInverseRouterCacheAddress
+    SYNTAX InetAddress (SIZE(4))
+    DESCRIPTION
+            "Only IPv4 addresses needed for IGMPv1 router support."
+
+    OBJECT mgmdRouterInterfaceVersion
+    SYNTAX Unsigned32 (1)
+    DESCRIPTION
+            "Write access is not required.  Only version 1 needs to
+             be supported."
+    ::= { mgmdMIBCompliance 3 }
+
+-- Read Compliance statement for IGMPv2 and MLDv1 Hosts
+-- IGMPv2 only supports the IPv4 Address Family
+-- MLDv1 only supports the IPv6 Address Family
+
+mgmdIgmpV2MldV1HostReadMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-only compliance statement for hosts running IGMPv2
+            [RFC2236] or MLDv1 [RFC2710] and implementing the MGMD
+            MIB.  IGMPv2 hosts only support the IPv4 address type and
+            MLDv1 hosts only support the IPv6 address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdHostBaseMIBGroup,
+                       mgmdV2HostMIBGroup
+                     }
+
+    OBJECT mgmdHostInterfaceStatus
+    SYNTAX RowStatus {active(1)}
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write or read-create access is not required and only
+             the value 'active(1)' needs to be supported."
+
+    OBJECT mgmdHostInterfaceVersion
+    SYNTAX Unsigned32 (1..2)
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required.  Only versions 1 and 2 need
+             to be supported."
+
+    GROUP   mgmdHostExtendedMIBGroup
+    DESCRIPTION
+            "Supporting this group can be especially useful in an
+             environment with a router that does not support the
+             MGMD MIB."
+    ::= { mgmdMIBCompliance 4 }
+
+-- Write Compliance statement for IGMPv2 and MLDv1 Hosts
+-- IGMPv2 only supports the IPv4 Address Family
+-- MLDv1 only supports the IPv6 Address Family
+
+mgmdIgmpV2MldV1HostWriteMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-create compliance statement for hosts running
+            IGMPv2 [RFC2236] or MLDv1 [RFC2710] and implementing
+            the MGMD MIB.  IGMPv2 hosts only support the IPv4 address
+            type and MLDv1 hosts only support the IPv6 address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdHostBaseMIBGroup,
+                       mgmdV2HostMIBGroup }
+    OBJECT mgmdHostInterfaceVersion
+    SYNTAX Unsigned32 (1..2)
+    DESCRIPTION
+            "Only versions 1 and 2 need to be supported."
+    ::= { mgmdMIBCompliance 5 }
+
+-- Read Compliance statement for IGMPv2 and MLDv1 Routers
+-- IGMPv2 only supports the IPv4 Address Family
+-- MLDv1 only supports the IPv6 Address Family
+
+mgmdIgmpV2MldV1RouterReadMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-only compliance statement for routers running
+            IGMPv2 [RFC2236] or MLDv1 [RFC2710] and implementing
+            the MGMD MIB.  IGMPv2 routers only support the IPv4
+            address type and MLDv1 routers only support the IPv6
+            address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdRouterBaseMIBGroup,
+                       mgmdV2RouterBaseMIBGroup
+                     }
+
+    OBJECT mgmdRouterInterfaceLastMemberQueryInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceRobustness
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceQueryMaxResponseTime
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceVersion
+    SYNTAX Unsigned32 (1..2)
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required.  Only versions 1 and 2
+             need to be supported."
+
+    OBJECT mgmdRouterInterfaceStatus
+    SYNTAX RowStatus {active(1)}
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write or read-create access is not required and only
+             the value 'active(1)' needs to be supported."
+
+    OBJECT mgmdRouterInterfaceQueryInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    GROUP   mgmdV2ProxyMIBGroup
+    DESCRIPTION
+            "Write access is not required."
+    ::= { mgmdMIBCompliance 6 }
+
+-- Write Compliance statement for IGMPv2, IGMPv3, MLDv1, and MLDv2
+--   Routers
+-- IGMPv2 and IGMPv3 only support the IPv4 Address Family
+-- MLDv1 and MLDv2 only support the IPv6 Address Family
+
+mgmdIgmpV2V3MldV1V2RouterWriteMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-create compliance statement for routers running
+            IGMPv2 [RFC2236], IGMPv3 [RFC3376], MLDv1 [RFC2710], or
+            MLDv2 [RFC3810] and implementing the MGMD MIB.  IGMPv2 and
+            IGMPv3 routers only support the IPv4 address type, while
+            MLDv1 and MLDv2 routers only support the IPv6 address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdRouterBaseMIBGroup,
+                       mgmdV2RouterBaseMIBGroup
+                     }
+
+    GROUP   mgmdV2ProxyMIBGroup
+    DESCRIPTION
+            "Read-create access is required."
+    ::= { mgmdMIBCompliance 7 }
+
+-- Read Compliance statement for IGMPv2, IGMPv3, MLDv1, and MLDv2 Hosts
+-- IGMPv2 and IGMPv3 only support the IPv4 Address Family
+-- MLDv1 and MLDv2 only support the IPv6 Address Family
+
+mgmdIgmpV3MldV2HostReadMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts running IGMPv3
+            [RFC3376] or MLDv2 [RFC3810] and implementing the
+            MGMD MIB.  IGMPv3 hosts only support the IPv4 address
+            type and MLDv2 hosts only support the IPv6 address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdHostBaseMIBGroup,
+                       mgmdV2HostMIBGroup,
+                       mgmdV3HostMIBGroup
+                     }
+
+    OBJECT mgmdHostInterfaceVersion
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdHostInterfaceStatus
+    SYNTAX RowStatus {active(1)}
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write or read-create access is not required and only
+             the value 'active(1)' needs to be supported."
+
+    OBJECT  mgmdHostInterfaceVersion3Robustness
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    GROUP   mgmdHostExtendedMIBGroup
+    DESCRIPTION
+            "Supporting this group can be especially useful in
+             an environment with a router that does not support the
+             MGMD MIB."
+    ::= { mgmdMIBCompliance 8 }
+
+-- Write Compliance statement for IGMPv2, IGMPv3, MLDv1, and MLDv2 Hosts
+-- IGMPv2 and IGMPv3 only support the IPv4 Address Family
+-- MLDv1 and MLDv2 only support the IPv6 Address Family
+
+mgmdIgmpV3MldV2HostWriteMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for hosts running IGMPv3
+            [RFC3376] or MLDv2 [RFC3810] and implementing the
+            MGMD MIB.  IGMPv3 hosts only support the IPv4 address
+            type and MLDv2 hosts only support the IPv6 address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdHostBaseMIBGroup,
+                       mgmdV2HostMIBGroup,
+                       mgmdV3HostMIBGroup
+                     }
+
+    GROUP   mgmdHostExtendedMIBGroup
+    DESCRIPTION
+            "Supporting this group can be especially useful in
+             an environment with a router that does not support the
+             MGMD MIB."
+    ::= { mgmdMIBCompliance 9 }
+
+-- Read Compliance statement for IGMPv2, IGMPv3, MLDv1, and MLDv2
+--   Routers
+-- IGMPv2 and IGMPv3 only support the IPv4 Address Family
+-- MLDv1 and MLDv2 only support the IPv6 Address Family
+
+mgmdIgmpV3MldV2RouterReadMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "A read-only compliance statement for routers running
+            IGMPv3 [RFC3376] or MLDv2 [RFC3810] and implementing
+            the MGMD MIB.  IGMPv3 routers only support the IPv4
+            address type and MLDv2 routers only support the IPv6
+            address type."
+    MODULE  -- this module
+    MANDATORY-GROUPS { mgmdRouterBaseMIBGroup,
+                       mgmdV2RouterBaseMIBGroup,
+                       mgmdV3RouterMIBGroup
+                     }
+
+    OBJECT mgmdRouterInterfaceLastMemberQueryInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceRobustness
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceQueryMaxResponseTime
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceVersion
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT mgmdRouterInterfaceStatus
+    SYNTAX RowStatus {active(1)}
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write or read-create access is not required and only
+             the value 'active(1)' needs to be supported."
+
+    OBJECT mgmdRouterInterfaceQueryInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    GROUP   mgmdV2ProxyMIBGroup
+    DESCRIPTION
+            "Write access is not required."
+    ::= { mgmdMIBCompliance 10 }
+
+-- units of conformance
+
+mgmdHostBaseMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdHostInterfaceStatus,
+              mgmdHostInterfaceVersion
+            }
+    STATUS  current
+    DESCRIPTION
+            "The basic collection of objects providing management of
+            MGMD version 1, 2, or 3 for hosts."
+    ::= { mgmdMIBGroups 1 }
+
+mgmdRouterBaseMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdRouterInterfaceStatus,
+              mgmdRouterInterfaceQueryInterval,
+              mgmdRouterCacheUpTime, mgmdRouterCacheExpiryTime,
+              mgmdRouterInterfaceVersion,
+              mgmdRouterInterfaceJoins, mgmdRouterInterfaceGroups,
+              mgmdRouterCacheLastReporter,
+              mgmdRouterInterfaceQuerierUpTime,
+              mgmdRouterInterfaceQuerierExpiryTime,
+              mgmdRouterInterfaceQuerier,
+              mgmdInverseRouterCacheAddress
+            }
+    STATUS  current
+    DESCRIPTION
+            "The basic collection of objects providing management of
+            MGMD version 1, 2, or 3 for routers."
+    ::= { mgmdMIBGroups 2 }
+
+mgmdV2HostMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdHostInterfaceVersion1QuerierTimer
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional read-only objects for management
+            of IGMP version 2 in hosts for MGMD version 2 compliance."
+    ::= { mgmdMIBGroups 3 }
+
+mgmdHostExtendedMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdHostCacheLastReporter, mgmdHostCacheUpTime,
+              mgmdHostInterfaceQuerier, mgmdInverseHostCacheAddress }
+    STATUS  current
+    DESCRIPTION
+            "A collection of optional objects for MGMD hosts."
+    ::= { mgmdMIBGroups 4 }
+
+mgmdV2RouterBaseMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdRouterInterfaceWrongVersionQueries,
+              mgmdRouterInterfaceLastMemberQueryCount,
+              mgmdRouterInterfaceStartupQueryCount,
+              mgmdRouterInterfaceStartupQueryInterval,
+              mgmdRouterCacheVersion1HostTimer,
+              mgmdRouterInterfaceQueryMaxResponseTime,
+              mgmdRouterInterfaceRobustness,
+              mgmdRouterInterfaceLastMemberQueryInterval
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional read-only objects for
+            management of MGMD version 2 in routers."
+    ::= { mgmdMIBGroups 5 }
+
+mgmdV2ProxyMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdRouterInterfaceProxyIfIndex }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional read-create objects for
+            management of MGMD proxy devices."
+    ::= { mgmdMIBGroups 6 }
+
+mgmdV3HostMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdHostInterfaceVersion2QuerierTimer,
+              mgmdHostCacheSourceFilterMode,
+              mgmdHostInterfaceVersion3Robustness,
+              mgmdHostSrcListExpire
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional objects for
+            management of MGMD version 3 in hosts."
+    ::= { mgmdMIBGroups 7 }
+
+mgmdV3RouterMIBGroup OBJECT-GROUP
+    OBJECTS { mgmdRouterCacheSourceFilterMode,
+              mgmdRouterCacheVersion2HostTimer,
+              mgmdRouterCacheExcludeModeExpiryTimer,
+              mgmdRouterSrcListExpire
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of additional read-only objects for
+            management of MGMD version 3 in routers."
+    ::= { mgmdMIBGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/MIDCOM-MIB.mib b/snmp_builder/mibs/MIDCOM-MIB.mib
new file mode 100644
index 0000000..1210c48
--- /dev/null
+++ b/snmp_builder/mibs/MIDCOM-MIB.mib
@@ -0,0 +1,2260 @@
+MIDCOM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, Unsigned32,
+    Counter32, Gauge32, mib-2
+        FROM SNMPv2-SMI                  -- RFC 2578
+
+    TEXTUAL-CONVENTION, TruthValue,
+    StorageType, RowStatus
+        FROM SNMPv2-TC                   -- RFC 2579
+
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- RFC 2580
+
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- RFC 3411
+
+    InetAddressType, InetAddress,
+    InetPortNumber,
+    InetAddressPrefixLength
+        FROM INET-ADDRESS-MIB            -- RFC 4001
+
+    InterfaceIndexOrZero
+        FROM IF-MIB                      -- RFC 2863
+
+    NatBindIdOrZero
+        FROM NAT-MIB;                    -- RFC 4008
+
+midcomMIB MODULE-IDENTITY
+    LAST-UPDATED "200708091011Z"  -- August 09, 2007
+    ORGANIZATION "IETF Middlebox Communication Working Group"
+    CONTACT-INFO
+       "WG charter:
+          http://www.ietf.org/html.charters/midcom-charter.html
+
+        Mailing Lists:
+          General Discussion: midcom@ietf.org
+          To Subscribe: midcom-request@ietf.org
+          In Body: subscribe your_email_address
+
+        Co-editor:
+          Juergen Quittek
+          NEC Europe Ltd.
+          Kurfuersten-Anlage 36
+          69115 Heidelberg
+          Germany
+          Tel: +49 6221 4342-115
+          Email: quittek@nw.neclab.eu
+
+        Co-editor:
+          Martin Stiemerling
+          NEC Europe Ltd.
+          Kurfuersten-Anlage 36
+          69115 Heidelberg
+          Germany
+          Tel: +49 6221 4342-113
+          Email: stiemerling@nw.neclab.eu
+
+        Co-editor:
+          Pyda Srisuresh
+          Kazeon Systems, Inc.
+          1161 San Antonio Rd.
+          Mountain View, CA 94043
+          U.S.A.
+          Tel: +1 408 836-4773
+          Email: srisuresh@yahoo.com"
+    DESCRIPTION
+        "This MIB module defines a set of basic objects for
+         configuring middleboxes, such as firewalls and network
+
+         address translators, in order to enable communication
+         across these devices.
+
+         Managed objects defined in this MIB module are structured
+         in three kinds of objects:
+           - transaction objects required according to the MIDCOM
+             protocol requirements defined in RFC 3304 and according
+             to the MIDCOM protocol semantics defined in RFC 3989,
+           - configuration objects that can be used for retrieving or
+             setting parameters of the implementation of transaction
+             objects,
+           - optional monitoring objects that provide information
+             about used resource and statistics
+
+         The transaction objects are organized in two subtrees:
+           - objects modeling MIDCOM policy rules in the
+             midcomRuleTable
+           - objects modeling MIDCOM policy rule groups in the
+             midcomGroupTable
+
+         Note that typically, configuration objects are not intended
+         to be written by MIDCOM clients.  In general, write access
+         to these objects needs to be restricted more strictly than
+         write access to objects in the transaction subtrees.
+
+         Copyright (C) The Internet Society (2008).  This version
+         of this MIB module is part of RFC 5190;  see the RFC
+         itself for full legal notices."
+
+    REVISION    "200708091011Z"  -- August 09, 2007
+    DESCRIPTION "Initial version, published as RFC 5190."
+    ::= { mib-2 171 }
+
+--
+-- main components of this MIB module
+--
+
+midcomNotifications   OBJECT IDENTIFIER ::= { midcomMIB 0 }
+midcomObjects         OBJECT IDENTIFIER ::= { midcomMIB 1 }
+midcomConformance     OBJECT IDENTIFIER ::= { midcomMIB 2 }
+
+--  Transaction objects required according to the MIDCOM
+--  protocol requirements defined in RFC 3304 and according to
+--  the MIDCOM protocol semantics defined in RFC 3989
+midcomTransaction     OBJECT IDENTIFIER ::= { midcomObjects 1 }
+
+--  Configuration objects that can be used for retrieving
+--  middlebox capability information (mandatory) and for
+
+--  setting parameters of the implementation of transaction
+--  objects (optional)
+midcomConfig   OBJECT IDENTIFIER ::= { midcomObjects 2 }
+
+--  Optional monitoring objects that provide information about
+--  used resource and statistics
+midcomMonitoring      OBJECT IDENTIFIER ::= { midcomObjects 3 }
+
+--
+-- Transaction Objects
+--
+-- Transaction objects are structured according to the MIDCOM
+-- protocol semantics into two groups:
+--   - objects modeling MIDCOM policy rules in the midcomRuleTable
+--   - objects modeling MIDCOM policy rule groups in the
+--     midcomGroupTable
+
+--
+-- Policy rule subtree
+--
+-- The midcomRuleTable lists policy rules
+-- including policy reserve rules and policy enable rules.
+--
+
+midcomRuleTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MidcomRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists policy rules.
+
+         It is indexed by the midcomRuleOwner, the
+         midcomGroupIndex, and the midcomRuleIndex.
+         This implies that a rule is a member of exactly
+         one group and that group membership cannot
+         be changed.
+
+         Entries can be deleted by writing to
+         midcomGroupLifetime or midcomRuleLifetime
+         and potentially also to midcomRuleStorageTime."
+    ::= { midcomTransaction 3 }
+
+midcomRuleEntry OBJECT-TYPE
+    SYNTAX      MidcomRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular MIDCOM policy rule."
+    INDEX { midcomRuleOwner, midcomGroupIndex, midcomRuleIndex }
+    ::= { midcomRuleTable 1 }
+
+MidcomRuleEntry ::= SEQUENCE {
+    midcomRuleOwner                   SnmpAdminString,
+    midcomRuleIndex                   Unsigned32,
+    midcomRuleAdminStatus             INTEGER,
+    midcomRuleOperStatus              INTEGER,
+    midcomRuleStorageType             StorageType,
+    midcomRuleStorageTime             Unsigned32,
+    midcomRuleError                   SnmpAdminString,
+    midcomRuleInterface               InterfaceIndexOrZero,
+    midcomRuleFlowDirection           INTEGER,
+    midcomRuleMaxIdleTime             Unsigned32,
+    midcomRuleTransportProtocol       Unsigned32,
+    midcomRulePortRange               INTEGER,
+    midcomRuleInternalIpVersion       InetAddressType,
+    midcomRuleExternalIpVersion       InetAddressType,
+    midcomRuleInternalIpAddr          InetAddress,
+    midcomRuleInternalIpPrefixLength  InetAddressPrefixLength,
+    midcomRuleInternalPort            InetPortNumber,
+    midcomRuleExternalIpAddr          InetAddress,
+    midcomRuleExternalIpPrefixLength  InetAddressPrefixLength,
+    midcomRuleExternalPort            InetPortNumber,
+    midcomRuleInsideIpAddr            InetAddress,
+    midcomRuleInsidePort              InetPortNumber,
+    midcomRuleOutsideIpAddr           InetAddress,
+    midcomRuleOutsidePort             InetPortNumber,
+    midcomRuleLifetime                Unsigned32,
+    midcomRuleRowStatus               RowStatus
+}
+
+midcomRuleOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The manager who owns this row in the midcomRuleTable.
+
+         This object SHOULD uniquely identify an authenticated
+         MIDCOM client.  This object is part of the table index to
+         allow for the use of the SNMPv3 View-based Access Control
+         Model (VACM, RFC 3415)."
+    ::= { midcomRuleEntry 1 }
+
+midcomRuleIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The value of this object must be unique in
+         combination with the values of the objects
+         midcomRuleOwner and midcomGroupIndex in this row."
+    ::= { midcomRuleEntry 3 }
+
+midcomRuleAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    reserve(1),
+                    enable(2),
+                    notSet(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the desired status of
+         the policy rule.  See the definition of midcomRuleOperStatus
+         for a description of the values.
+
+         When a midcomRuleEntry is created without explicitly setting
+         this object, its value will be notSet(3).
+
+         However, a SET request can only set this object to either
+         reserve(1) or enable(2).  Attempts to set this object to
+         notSet(3) will always fail with an 'inconsistentValue'
+         error.  Note that this error code is SNMP specific.  If the
+         MIB module is used with other protocols than SNMP, errors
+         with similar semantics specific to those protocols should
+         be returned.
+
+         When the midcomRuleAdminStatus object is set, then the
+         MIDCOM-MIB implementation will try to read the respective
+         relevant objects of the entry and try to achieve the
+         corresponding midcomRuleOperStatus.
+
+         Setting midcomRuleAdminStatus to value reserve(1) when
+         object midcomRuleOperStatus has a value of reserved(7)
+         does not have any effect on the policy rule.
+         Setting midcomRuleAdminStatus to value enable(2) when
+         object midcomRuleOperStatus has a value of enabled(8)
+         does not have any effect on the policy rule.
+
+         Depending on whether the midcomRuleAdminStatus is set to
+         reserve(1) or enable(2), several objects must be set in
+         advance.  They serve as parameters of the policy rule to be
+         established.
+
+         When object midcomRuleAdminStatus is set to reserve(1),
+         then the following objects in the same entry are of
+         relevance:
+             - midcomRuleInterface
+             - midcomRuleTransportProtocol
+             - midcomRulePortRange
+             - midcomRuleInternalIpVersion
+             - midcomRuleExternalIpVersion
+             - midcomRuleInternalIpAddr
+             - midcomRuleInternalIpPrefixLength
+             - midcomRuleInternalPort
+             - midcomRuleLifetime
+
+         MIDCOM-MIB implementation may also consider the value
+         of object midcomRuleMaxIdleTime when establishing
+         a reserve rule.
+
+         When object midcomRuleAdminStatus is set to enable(2),
+         then the following objects in the same entry are of
+         relevance:
+             - midcomRuleInterface
+             - midcomRuleFlowDirection
+             - midcomRuleMaxIdleTime
+             - midcomRuleTransportProtocol
+             - midcomRulePortRange
+             - midcomRuleInternalIpVersion
+             - midcomRuleExternalIpVersion
+             - midcomRuleInternalIpAddr
+             - midcomRuleInternalIpPrefixLength
+             - midcomRuleInternalPort
+             - midcomRuleExternalIpAddr
+             - midcomRuleExternalIpPrefixLength
+             - midcomRuleExternalPort
+             - midcomRuleLifetime
+
+         When retrieved, the object returns the last set value.
+         If no value has been set, it returns the default value
+         notSet(3)."
+    DEFVAL { notSet }
+    ::= { midcomRuleEntry 4 }
+
+midcomRuleOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    newEntry(1),
+                    setting(2),
+                    checkingRequest(3),
+                    incorrectRequest(4),
+                    processingRequest(5),
+                    requestRejected(6),
+                    reserved(7),
+                    enabled(8),
+                    timedOut(9),
+                    terminatedOnRequest(10),
+                    terminated(11),
+                    genericError(12)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The actual status of the policy rule.  The
+         midcomRuleOperStatus object may have the following values:
+
+         - newEntry(1) indicates that the entry in the
+           midcomRuleTable was created, but not modified yet.
+           Such an entry needs to be filled with values specifying
+           a request first.
+
+         - setting(2) indicates that the entry has been already
+           modified after generating it, but no request was made
+           yet.
+
+         - checkingRequest(3) indicates that midcomRuleAdminStatus
+           has recently been set and that the MIDCOM-MIB
+           implementation is currently checking the parameters of
+           the request.  This is a transient state.  The value of
+           this object will change to either incorrectRequest(4)
+           or processingRequest(5) without any external
+           interaction.  A MIDCOM-MIB implementation MAY return
+           this value while checking request parameters.
+
+         - incorrectRequest(4) indicates that checking a request
+           resulted in detecting an incorrect value in one of the
+           objects containing request parameters.  The failure
+           reason is indicated by the value of midcomRuleError.
+
+         - processingRequest(5) indicates that
+           midcomRuleAdminStatus has recently been set and that
+           the MIDCOM-MIB implementation is currently processing
+           the request and trying to configure the middlebox
+           accordingly.  This is a transient state.  The value of
+           this object will change to either requestRejected(6),
+           reserved(7), or enabled(8) without any external
+           interaction.  A MIDCOM-MIB implementation MAY return
+           this value while processing a request.
+
+         - requestRejected(6) indicates that a request to establish
+
+           a policy rule specified by the entry was rejected.  The
+           reason for rejection is indicated by the value of
+           midcomRuleError.
+
+         - reserved(7) indicates that the entry describes an
+           established policy reserve rule.
+           These values of MidcomRuleEntry are meaningful
+           for a reserved policy rule:
+               - midcomRuleMaxIdleTime
+               - midcomRuleInterface
+               - midcomRuleTransportProtocol
+               - midcomRulePortRange
+               - midcomRuleInternalIpVersion
+               - midcomRuleExternalIpVersion
+               - midcomRuleInternalIpAddr
+               - midcomRuleInternalIpPrefixLength
+               - midcomRuleInternalPort
+               - midcomRuleOutsideIpAddr
+               - midcomRuleOutsidePort
+               - midcomRuleLifetime
+
+         - enabled(8) indicates that the entry describes an
+           established policy enable rule.
+           These values of MidcomRuleEntry are meaningful
+           for an enabled policy rule:
+
+               - midcomRuleFlowDirection
+               - midcomRuleInterface
+               - midcomRuleMaxIdleTime
+               - midcomRuleTransportProtocol
+               - midcomRulePortRange
+               - midcomRuleInternalIpVersion
+               - midcomRuleExternalIpVersion
+               - midcomRuleInternalIpAddr
+               - midcomRuleInternalIpPrefixLength
+               - midcomRuleInternalPort
+               - midcomRuleExternalIpAddr
+               - midcomRuleExternalIpPrefixLength
+               - midcomRuleExternalPort
+               - midcomRuleInsideIpAddr
+               - midcomRuleInsidePort
+               - midcomRuleOutsideIpAddr
+               - midcomRuleOutsidePort
+               - midcomRuleLifetime
+
+         - timedOut(9) indicates that the lifetime of a previously
+           established policy rule has expired and that the policy
+           rule is terminated for this reason.
+
+         - terminatedOnRequest(10) indicates that a previously
+           established policy rule was terminated by an SNMP
+           manager setting the midcomRuleLifetime to 0 or
+           setting midcomGroupLifetime to 0.
+
+         - terminated(11) indicates that a previously established
+           policy rule was terminated by the MIDCOM-MIB
+           implementation for a reason other than lifetime
+           expiration or an explicit request from a MIDCOM client.
+
+         - genericError(12) indicates that the policy rule
+           specified by the entry is not established due to
+           an error condition not listed above.
+
+         The states timedOut(9), terminatedOnRequest(10), and
+         terminated(11) are referred to as termination states.
+
+         The states incorrectRequest(4), requestRejected(6),
+         and genericError(12) are referred to as error states.
+
+         The checkingRequest(3) and processingRequest(5)
+         states are transient states, which will lead to either
+         one of the error states or the reserved(7) state or the
+         enabled(8) state.  MIDCOM-MIB implementations MAY return
+         these values when checking or processing requests."
+    DEFVAL { newEntry }
+    ::= { midcomRuleEntry 5 }
+
+midcomRuleStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this object returns the storage
+         type of the policy rule.  Writing to this object can
+         change the storage type of the particular row from
+         volatile(2) to nonVolatile(3) or vice versa.
+
+         Attempts to set this object to permanent will always
+         fail with an 'inconsistentValue' error.  Note that this
+         error code is SNMP specific.  If the MIB module is used
+         with other protocols than SNMP, errors with similar
+         semantics specific to those protocols should be
+         returned.
+
+         If midcomRuleStorageType has the value permanent(4),
+         then all objects in this row whose MAX-ACCESS value
+         is read-create must be read-only."
+    DEFVAL { volatile }
+    ::= { midcomRuleEntry 6 }
+
+midcomRuleStorageTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object specifies how long this row
+         can exist in the midcomRuleTable after the
+         midcomRuleOperStatus switched to a termination state or
+         to an error state.  This object returns the remaining
+         time that the row may exist before it is aged out.
+
+         After expiration or termination of the context, the value
+         of this object ticks backwards.  The entry in the
+         midcomRuleTable is destroyed when the value reaches 0.
+
+         The value of this object may be set in order to increase
+         or reduce the remaining time that the row may exist.
+         Setting the value to 0 will destroy this entry as soon as
+         the midcomRuleOperStatus switched to a termination state
+         or to an error state.
+
+         Note that there is no guarantee that the row is stored as
+         long as this object indicates.  At any time, the MIDCOM-
+         MIB implementation may decide to remove a row describing
+         a terminated policy rule before the storage time of the
+         corresponding row in the midcomRuleTable reaches the
+         value of 0.  In this case, the information stored in this
+         row is not available anymore.
+
+         If object midcomRuleStorageType indicates that the policy
+         rule has the storage type permanent(4), then this object has
+         a constant value of 4294967295."
+    DEFVAL { 0 }
+    ::= { midcomRuleEntry 7 }
+
+midcomRuleError OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a descriptive error message if
+         the transition into the operational status reserved(7)
+         or enabled(8) failed.  Implementations must reset the
+         error message to a zero-length string when a new
+
+         attempt to change the policy rule status to reserved(7)
+         or enabled(8) is started.
+
+         RECOMMENDED values to be returned in particular cases
+         include
+           - 'lack of IP addresses'
+           - 'lack of port numbers'
+           - 'lack of resources'
+           - 'specified NAT interface does not exist'
+           - 'specified NAT interface does not support NAT'
+           - 'conflict with already existing policy rule'
+           - 'no internal IP wildcarding allowed'
+           - 'no external IP wildcarding allowed'
+
+         The semantics of these error messages and the corresponding
+         behavior of the MIDCOM-MIB implementation are specified
+         in sections 2.3.9 and 2.3.10 of RFC 3989."
+    REFERENCE
+        "RFC 3989, sections 2.3.9 and 2.3.10"
+    DEFVAL { ''H }
+    ::= { midcomRuleEntry 8 }
+
+midcomRuleInterface OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the IP interface for which
+         enforcement of a policy rule is requested or performed,
+         respectively.
+
+         The interface is identified by its index in the ifTable
+         (see IF-MIB in RFC 2863).  If the object has a value of 0,
+         then no particular interface is indicated.
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to request its preference
+         concerning the interface at which it requests NAT service.
+         The default value of 0 indicates that the manager does not
+         have a preferred interface or does not have sufficient
+         topology information for specifying one.  Writing to this
+         object in any state other than newEntry(1) or setting(2)
+         will always fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object indicates
+         the interface at which NAT service for this rule is
+         performed.  If NAT service is not required for enforcing
+         the policy rule, then the value of this object is 0.  Also,
+         if the MIDCOM-MIB implementation cannot indicate an
+         interface, because it does not have this information or
+         because NAT service is not offered at a particular single
+         interface, then the value of the object is 0.
+
+         Note that the index of a particular interface in the
+         ifTable may change after a re-initialization of the
+         middlebox, for example, after adding another interface to
+         it.  In such a case, the value of this object may change,
+         but the interface referred to by the MIDCOM-MIB MUST still
+         be the same.  If, after a re-initialization of the
+         middlebox, the interface referred to before
+         re-initialization cannot be uniquely mapped anymore to a
+         particular entry in the ifTable, then the value of object
+         midcomRuleOperStatus of the same entry MUST be changed to
+         terminated(11).
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 0 }
+    ::= { midcomRuleEntry 9 }
+
+midcomRuleFlowDirection OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    inbound(1),
+                    outbound(2),
+                    biDirectional(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This parameter specifies the direction of enabled
+         communication, either inbound(1), outbound(2), or
+         biDirectional(3).
+
+         The semantics of this object depends on the protocol
+         the rule relates to.  If the rule is independent of
+
+         the transport protocol (midcomRuleTransportProtocol
+         has a value of 0) or if the transport protocol is UDP,
+         then the value of midcomRuleFlowDirection indicates
+         the direction of packets traversing the middlebox.
+
+         In this case, value inbound(1) indicates that packets
+         are traversing from outside to inside, value outbound(2)
+         indicates that packets are traversing from inside to
+         outside.  For both values, inbound(1) and outbound(2)
+         packets can traverse the middlebox only unidirectional.
+         A bidirectional flow is indicated by value
+         biDirectional(3).
+
+         If the transport protocol is TCP, the packet flow is
+         always bidirectional, but the value of
+         midcomRuleFlowDirection indicates that:
+
+           - inbound(1): bidirectional TCP packet flow.
+             First packet, with TCP SYN flag set, must arrive
+             at an outside interface of the middlebox.
+
+           - outbound(2): bidirectional TCP packet flow.
+             First packet, with TCP SYN flag set, must arrive
+             at an inside interface of the middlebox.
+
+           - biDirectional(3): bidirectional TCP packet flow.
+             First packet, with TCP SYN flag set, may arrive
+             at an inside or an outside interface of the middlebox.
+
+         This object is used as input to a request for
+         establishing a policy enable rule as well as for
+         indicating the properties of an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value of either newEntry(1), setting(2), or reserved(7),
+         then this object can be written by a manager in order to
+         specify a requested direction to be enabled by a policy
+         rule.  Writing to this object in any state other than
+         newEntry(1), setting(2), or reserved(7) will always fail
+         with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value enabled(8), then this object indicates the enabled
+
+         flow direction.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { outbound }
+    ::= { midcomRuleEntry 10 }
+
+midcomRuleMaxIdleTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Maximum idle time of the policy rule in seconds.
+
+         If no packet to which the policy rule applies passes the
+         middlebox for the specified midcomRuleMaxIdleTime, then
+         the policy rule enters the termination state timedOut(9).
+
+         A value of 0 indicates that the policy does not require
+         an individual idle time and that instead, a default idle
+         time chosen by the middlebox is used.
+
+         A value of 4294967295 ( = 2^32 - 1 ) indicates that the
+         policy does not time out if it is idle.
+
+         This object is used as input to a request for
+         establishing a policy enable rule as well as for
+         indicating the properties of an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value of either newEntry(1), setting(2), or reserved(7),
+         then this object can be written by a manager in order to
+         specify a maximum idle time for the policy rule to be
+         requested.  Writing to this object in any state others
+         than newEntry(1), setting(2), or reserved(7) will always
+         fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value enabled(8), then this object indicates the maximum
+         idle time of the policy rule.  Note that even if a maximum
+         idle time greater than zero was requested, the middlebox
+
+         may not be able to support maximum idle times and set the
+         value of this object to zero when entering state
+         enabled(8).
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 0 }
+    ::= { midcomRuleEntry 11 }
+
+midcomRuleTransportProtocol OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The transport protocol.
+
+         Valid values for midcomRuleTransportProtocol
+         other than zero are defined at:
+         http://www.iana.org/assignments/protocol-numbers
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value of either newEntry(1) or setting(2), then this
+         object can be written by a manager in order to specify a
+         requested transport protocol.  If translation of an IP
+         address only is requested, then this object must have the
+         default value 0.  Writing to this object in any state
+         other than newEntry(1) or setting(2) will always fail
+         with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object
+         indicates which transport protocol is enforced by this
+         policy rule.  A value of 0 indicates a rule acting on IP
+         addresses only.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 0 }
+    ::= { midcomRuleEntry 12 }
+
+midcomRulePortRange OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    single(1),
+                    pair(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The range of port numbers.
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.  It is relevant to the
+         operation of the MIDCOM-MIB implementation only if the
+         value of object midcomTransportProtocol in the same entry
+         has a value other than 0.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to specify the requested
+         size of the port range.  With single(1) just a single
+         port number is requested, with pair(2) a consecutive pair
+         of port numbers is requested with the lower number being
+         even.  Requesting a consecutive pair of port numbers may
+         be used by RTP [RFC3550] and may even be required to
+         support older RTP applications.
+
+         Writing to this object in any state other than
+         newEntry(1), setting(2) or reserved(7) will always fail
+         with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value of either reserved(7) or enabled(8), then this
+         object will have the value that it had before the
+         transition to this state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { single }
+    ::= { midcomRuleEntry 13}
+
+midcomRuleInternalIpVersion OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "IP version of the internal address (A0) and the inside
+         address (A1).  Allowed values are ipv4(1), ipv6(2),
+         ipv4z(3), and ipv6z(4).
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to specify the IP version
+         required at the inside of the middlebox.  Writing to this
+         object in any state other than newEntry(1) or setting(2)
+         will always fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object
+         indicates the internal/inside IP version.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { ipv4 }
+    ::= { midcomRuleEntry 14 }
+
+midcomRuleExternalIpVersion OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "IP version of the external address (A3) and the outside
+         address (A2).  Allowed values are ipv4(1) and ipv6(2).
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to specify the IP version
+         required at the outside of the middlebox.  Writing to
+         this object in any state other than newEntry(1) or
+         setting(2) will always fail with an 'inconsistentValue'
+         error.
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object
+         indicates the external/outside IP version.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7) or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { ipv4 }
+    ::= { midcomRuleEntry 15 }
+
+midcomRuleInternalIpAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The internal IP address (A0).
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to specify the internal IP
+         address for which a reserve policy rule or a enable policy
+         rule is requested to be established.  Writing to this
+         object in any state other than newEntry(1) or setting(2)
+         will always fail with an 'inconsistentValue' error.
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object will
+         have the value which it had before the transition to this
+
+         state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7) or
+         enabled(8), then the value of this object is irrelevant."
+    ::= { midcomRuleEntry 16 }
+
+midcomRuleInternalIpPrefixLength OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The prefix length of the internal IP address used for
+         wildcarding.  A value of 0 indicates a full wildcard;
+         in this case, the value of midcomRuleInternalIpAddr is
+         irrelevant.  If midcomRuleInternalIpVersion has a value
+         of ipv4(1), then a value > 31 indicates no wildcarding
+         at all.  If midcomRuleInternalIpVersion has a value
+         of ipv4(2), then a value > 127 indicates no wildcarding
+         at all.  A MIDCOM-MIB implementation that does not
+         support IP address wildcarding MUST implement this object
+         as read-only with a value of 128.  A MIDCOM that does
+         not support wildcarding based on prefix length MAY
+         restrict allowed values for this object to 0 and 128.
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to specify the prefix length
+         of the internal IP address for which a reserve policy rule
+         or an enable policy rule is requested to be established.
+         Writing to this object in any state other than newEntry(1)
+         or setting(2) will always fail with an 'inconsistentValue'
+         error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object will
+         have the value which it had before the transition to this
+         state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 128 }
+    ::= { midcomRuleEntry 17 }
+
+midcomRuleInternalPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The internal port number.  A value of 0 is a wildcard.
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.  It is relevant to the
+         operation of the MIDCOM-MIB implementation only if the
+         value of object midcomTransportProtocol in the same entry
+         has a value other than 0.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1) or setting(2), then this object can be
+         written by a manager in order to specify the internal port
+         number for which a reserve policy rule or an enable policy
+         rule is requested to be established.  Writing to this
+         object in any state other than newEntry(1) or setting(2)
+         will always fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value reserved(7) or enabled(8), then this object will
+         have the value that it had before the transition to this
+         state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 0 }
+    ::= { midcomRuleEntry 18 }
+
+midcomRuleExternalIpAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The external IP address (A3).
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1), setting(2), or reserved(7), then this
+         object can be written by a manager in order to specify the
+         external IP address for which an enable policy rule is
+         requested to be established.  Writing to this object in
+         any state other than newEntry(1), setting(2), or reserved(7)
+         will always fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value enabled(8), then this object will have the value
+         that it had before the transition to this state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    ::= { midcomRuleEntry 19 }
+
+midcomRuleExternalIpPrefixLength OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The prefix length of the external IP address used for
+         wildcarding.  A value of 0 indicates a full wildcard;
+         in this case, the value of midcomRuleExternalIpAddr is
+         irrelevant.  If midcomRuleExternalIpVersion has a value
+         of ipv4(1), then a value > 31 indicates no wildcarding
+         at all.  If midcomRuleExternalIpVersion has a value
+         of ipv4(2), then a value > 127 indicates no wildcarding
+         at all.  A MIDCOM-MIB implementation that does not
+         support IP address wildcarding MUST implement this object
+         as read-only with a value of 128.  A MIDCOM that does
+         not support wildcarding based on prefix length MAY
+         restrict allowed values for this object to 0 and 128.
+
+         This object is used as input to a request for establishing
+
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1), setting(2), or reserved(7), then this
+         object can be written by a manager in order to specify the
+         prefix length of the external IP address for which an
+         enable policy rule is requested to be established.
+         Writing to this object in any state other than
+         newEntry(1), setting(2), or reserved(7) will always fail
+         with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value enabled(8), then this object will have the value
+         that it had before the transition to this state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 128 }
+    ::= { midcomRuleEntry 20 }
+
+midcomRuleExternalPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The external port number.  A value of 0 is a wildcard.
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.  It is relevant to the
+         operation of the MIDCOM-MIB implementation only if the
+         value of object midcomTransportProtocol in the same entry
+         has a value other than 0.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value newEntry(1), setting(2) or reserved(7), then this
+         object can be written by a manager in order to specify the
+         external port number for which an enable policy rule is
+         requested to be established.  Writing to this object in
+         any state other than newEntry(1), setting(2) or reserved(7)
+         will always fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has the
+         value enabled(8), then this object will have the value
+         which it had before the transition to this state.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7) or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 0 }
+    ::= { midcomRuleEntry 21 }
+
+midcomRuleInsideIpAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The inside IP address at the middlebox (A1).
+
+         The value of this object is relevant only if
+         object midcomRuleOperStatus of the same entry has
+         a value of either reserved(7) or enabled(8)."
+    ::= { midcomRuleEntry 22 }
+
+midcomRuleInsidePort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The inside port number at the middlebox.
+         A value of 0 is a wildcard.
+
+         The value of this object is relevant only if
+         object midcomRuleOperStatus of the same entry has
+         a value of either reserved(7) or enabled(8)."
+    ::= { midcomRuleEntry 23 }
+
+midcomRuleOutsideIpAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The outside IP address at the middlebox (A2).
+
+         The value of this object is relevant only if
+
+         object midcomRuleOperStatus of the same entry has
+         a value of either reserved(7) or enabled(8)."
+    ::= { midcomRuleEntry 24 }
+
+midcomRuleOutsidePort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The outside port number at the middlebox.
+         A value of 0 is a wildcard.
+
+         The value of this object is relevant only if
+         object midcomRuleOperStatus of the same entry has
+         a value of either reserved(7) or enabled(8)."
+    ::= { midcomRuleEntry 25 }
+
+midcomRuleLifetime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The remaining lifetime in seconds of this policy rule.
+
+         Lifetime of a policy rule starts when object
+         midcomRuleOperStatus in the same entry enters either
+         state reserved(7) or state enabled(8).
+
+         This object is used as input to a request for establishing
+         a policy rule as well as for indicating the properties of
+         an established policy rule.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value of either newEntry(1) or setting(2), then this
+         object can be written by a manager in order to specify
+         the requested lifetime of a policy rule to be established.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value of either reserved(7) or enabled(8), then this
+         object indicates the (continuously decreasing) remaining
+         lifetime of the established policy rule.  Note that when
+         entering state reserved(7) or enabled(8), the MIDCOM-MIB
+         implementation can choose a lifetime shorter than the one
+         requested.
+
+         Unlike other parameters of the policy rule, this parameter
+         can still be written in state reserved(7) and enabled(8).
+
+         Writing to this object is processed by the MIDCOM-MIB
+         implementation by choosing a lifetime value that is
+         greater than 0 and less than or equal to the minimum of
+         the requested value and the value specified by object
+         midcomConfigMaxLifetime:
+
+          0 <= lt_granted <= MINIMUM(lt_requested, lt_maximum)
+
+         where:
+            - lt_granted is the actually granted lifetime by the
+              MIDCOM-MIB implementation
+            - lt_requested is the requested lifetime of the MIDCOM
+              client
+            - lt_maximum is the value of object
+              midcomConfigMaxLifetime
+
+         SNMP SET requests to this object may be rejected or the
+         value of the object after an accepted SET operation may be
+         less than the value that was contained in the SNMP SET
+         request.
+
+         Successfully writing a value of 0 terminates the policy
+         rule.  Note that after a policy rule is terminated, still
+         the entry will exist as long as indicated by the value of
+         midcomRuleStorageTime.
+
+         Writing to this object in any state other than
+         newEntry(1), setting(2), reserved(7), or enabled(7)
+         will always fail with an 'inconsistentValue' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         If object midcomRuleOperStatus of the same entry has a
+         value other than newEntry(1), setting(2), reserved(7), or
+         enabled(8), then the value of this object is irrelevant."
+    DEFVAL { 180 }
+    ::= { midcomRuleEntry 26 }
+
+midcomRuleRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A control that allows entries to be added and removed from
+         this table.
+
+         Entries can also be removed from this table by setting
+         objects midcomRuleLifetime and midcomRuleStorageTime of
+         an entry to 0.
+
+         Attempts to set a row notInService(2) where the value
+         of the midcomRuleStorageType object is permanent(4) or
+         readOnly(5) will result in an 'notWritable' error.
+
+         Note that this error code is SNMP specific.  If the MIB
+         module is used with other protocols than SNMP, errors with
+         similar semantics specific to those protocols should be
+         returned.
+
+         The value of this object has no effect on whether other
+         objects in this conceptual row can be modified."
+    ::= { midcomRuleEntry 27 }
+
+--
+-- Policy rule group subtree
+--
+-- The midcomGroupTable lists all current policy rule groups.
+--
+
+midcomGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MidcomGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists all current policy rule groups.
+
+         Entries in this table are created or removed
+         implicitly when entries in the midcomRuleTable are
+         created or removed, respectively.  A group entry
+         in this table only exists as long as there are
+         member rules of this group in the midcomRuleTable.
+
+         The table serves for listing the existing groups and
+         their remaining lifetimes and for changing lifetimes
+         of groups and implicitly of all group members.
+         Groups and all their member policy rules can only be
+         deleted by deleting all member policies in the
+         midcomRuleTable.
+
+         Setting midcomGroupLifetime will result in setting
+         the lifetime of all policy members to the same value."
+    ::= { midcomTransaction 4 }
+
+midcomGroupEntry OBJECT-TYPE
+    SYNTAX      MidcomGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing properties of a particular
+         MIDCOM policy rule group."
+    INDEX { midcomRuleOwner, midcomGroupIndex }
+    ::= { midcomGroupTable 1 }
+
+MidcomGroupEntry ::= SEQUENCE {
+    midcomGroupIndex      Unsigned32,
+    midcomGroupLifetime   Unsigned32
+}
+
+midcomGroupIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index of this group for the midcomRuleOwner.
+         A group is identified by the combination of
+         midcomRuleOwner and midcomGroupIndex.
+
+         The value of this index must be unique per
+         midcomRuleOwner."
+    ::= { midcomGroupEntry 2 }
+
+midcomGroupLifetime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this object delivers the maximum
+         lifetime in seconds of all member rules of this group,
+         i.e., of all rows in the midcomRuleTable that have the
+         same values for midcomRuleOwner and midcomGroupIndex.
+
+         Successfully writing to this object modifies the
+         lifetime of all member policies.  Successfully
+         writing a value of 0 terminates all member policies
+         and implicitly deletes the group as soon as all member
+         entries are removed from the midcomRuleTable.
+
+         Note that after a group's lifetime is expired or is
+         set to 0, still the corresponding entry in the
+         midcomGroupTable will exist as long as terminated
+         member policy rules are stored as entries in the
+
+         midcomRuleTable.
+
+         Writing to this object is processed by the MIDCOM-MIB
+         implementation by choosing a lifetime value that is
+         greater than 0 and less than or equal to the minimum of
+         the requested value and the value specified by object
+         midcomConfigMaxLifetime:
+
+          0 <= lt_granted <= MINIMUM(lt_requested, lt_maximum)
+
+         where:
+            - lt_granted is the actually granted lifetime by the
+              MIDCOM-MIB implementation
+            - lt_requested is the requested lifetime of the MIDCOM
+              client
+            - lt_maximum is the value of object
+              midcomConfigMaxLifetime
+
+         SNMP SET requests to this object may be rejected or the
+         value of the object after an accepted SET operation may be
+         less than the value that was contained in the SNMP SET
+         request."
+    ::= { midcomGroupEntry 3 }
+
+--
+-- Configuration Objects
+--
+--  Configuration objects that can be used for retrieving
+--  middlebox capability information (mandatory) and for
+--  setting parameters of the implementation of transaction
+--  objects (optional).
+--
+--  Note that typically configuration objects are not intended
+--  to be written by MIDCOM clients.  In general, write access
+--  to these objects needs to be restricted more strictly than
+--  write access to transaction objects.
+--
+
+--
+-- Capabilities subtree
+--
+-- This subtree contains objects to which MIDCOM clients should
+-- have read access.
+--
+
+midcomConfigMaxLifetime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this object returns the maximum lifetime,
+         in seconds, that this middlebox allows policy rules to
+         have."
+    ::= { midcomConfig 1 }
+
+midcomConfigPersistentRules OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this object returns true(1) if the
+         MIDCOM-MIB implementation can store policy rules
+         persistently.  Otherwise, it returns false(2).
+
+         A value of true(1) indicates that there may be
+         entries in the midcomRuleTable with object
+         midcomRuleStorageType set to value nonVolatile(3)."
+    ::= { midcomConfig 2 }
+
+midcomConfigIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MidcomConfigIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table indicates capabilities of the MIDCOM-MIB
+         implementation per IP interface.
+
+         The table is indexed by the object midcomConfigIfIndex.
+
+         For indexing a single interface, this object contains
+         the value of the ifIndex object that is associated
+         with the interface.  If an entry with
+         midcomConfigIfIndex = 0 occurs, then bits set in
+         objects of this entry apply to all interfaces for which
+         there is no entry in this table with the interface's
+         index."
+    ::= { midcomConfig 3 }
+
+midcomConfigIfEntry OBJECT-TYPE
+    SYNTAX      MidcomConfigIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing the capabilities of a middlebox
+         with respect to the indexed IP interface."
+    INDEX { midcomConfigIfIndex }
+    ::= { midcomConfigIfTable 1 }
+
+MidcomConfigIfEntry ::= SEQUENCE {
+    midcomConfigIfIndex          InterfaceIndexOrZero,
+    midcomConfigIfBits           BITS,
+    midcomConfigIfEnabled        TruthValue
+}
+
+midcomConfigIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index of an entry in the midcomConfigIfTable.
+
+         For values different from zero, this object
+         identifies an IP interface by containing the same
+         value as the ifIndex object associated with the
+         interface.
+
+         Note that the index of a particular interface in the
+         ifTable may change after a re-initialization of the
+         middlebox, for example, after adding another interface to
+         it.  In such a case, the value of this object may change,
+         but the interface referred to by the MIDCOM-MIB MUST still
+         be the same.  If, after a re-initialization of the
+         middlebox, the interface referred to before
+         re-initialization cannot be uniquely mapped anymore to a
+         particular entry in the ifTable, then the value of object
+         midcomConfigIfEnabled of the same entry MUST be changed to
+         false(2).
+
+         If the object has a value of 0, then values
+         specified by further objects of the same entry
+         apply to all interfaces for which there is no
+         explicit entry in the midcomConfigIfTable."
+    ::= { midcomConfigIfEntry 1 }
+
+midcomConfigIfBits OBJECT-TYPE
+    SYNTAX      BITS {
+                    ipv4(0),
+                    ipv6(1),
+                    addressWildcards(2),
+                    portWildcards(3),
+                    firewall(4),
+                    nat(5),
+                    portTranslation(6),
+                    protocolTranslation(7),
+                    twiceNat(8),
+                    inside(9)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this object returns a set of bits
+         indicating the capabilities (or configuration) of
+         the middlebox with respect to the referenced IP interface.
+         If the index equals 0, then all set bits apply to all
+         interfaces.
+
+         If the ipv4(0) bit is set, then the middlebox supports
+         IPv4 at the indexed IP interface.
+
+         If the ipv6(1) bit is set, then the middlebox supports
+         IPv6 at the indexed IP interface.
+
+         If the addressWildcards(2) bit is set, then the
+         middlebox supports IP address wildcarding at the indexed
+         IP interface.
+
+         If the portWildcards(3) bit is set, then the
+         middlebox supports port wildcarding at the indexed
+         IP interface.
+
+         If the firewall(4) bit is set, then the middlebox offers
+         firewall functionality at the indexed interface.
+
+         If the nat(5) bit is set, then the middlebox offers
+         network address translation service at the indexed
+         interface.
+
+         If the portTranslation(6) bit is set, then the middlebox
+         offers port translation service at the indexed interface.
+         This bit is only relevant if nat(5) is set.
+
+         If the protocolTranslation(7) bit is set, then the
+         middlebox offers protocol translation service between
+         IPv4 and IPv6 at the indexed interface.  This bit is only
+         relevant if nat(5) is set.
+
+         If the twiceNat(8) bit is set, then the middlebox offers
+         twice network address translation service at the indexed
+         interface.  This bit is only relevant if nat(5) is set.
+
+         If the inside(9) bit is set, then the indexed interface is
+
+         an inside interface with respect to NAT functionality.
+         Otherwise, it is an outside interface.  This bit is only
+         relevant if nat(5) is set.  An SNMP agent supporting both
+         the MIDCOM-MIB module and the NAT-MIB module SHOULD ensure
+         that the value of this object is consistent with the values
+         of corresponding objects in the NAT-MIB module."
+    ::= { midcomConfigIfEntry 2 }
+
+midcomConfigIfEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of this object indicates the availability of
+         the middlebox service described by midcomConfigIfBits
+         at the indexed IP interface.
+
+         By writing to this object, the MIDCOM support for the
+         entire IP interface can be switched on or off.  Setting
+         this object to false(2) immediately stops middlebox
+         support at the indexed IP interface.  This implies that
+         all policy rules that use NAT or firewall resources at
+         the indexed IP interface are terminated immediately.
+         In this case, the MIDCOM agent MUST send
+         midcomUnsolicitedRuleEvent to all MIDCOM clients that
+         have access to one of the terminated rules."
+    DEFVAL { true }
+    ::= { midcomConfigIfEntry 3 }
+
+--
+-- Firewall subtree
+--
+-- This subtree contains the firewall configuration table
+--
+
+midcomConfigFirewallTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MidcomConfigFirewallEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table lists the firewall configuration per IP interface.
+
+        It can be used for configuring how policy rules created by
+        MIDCOM clients are realized as firewall rules of a firewall
+        implementation.  Particularly, the priority used for MIDCOM
+        policy rules can be configured.  For a single firewall
+        implementation at a particular IP interface, all MIDCOM
+        policy rules are realized as firewall rules with the same
+
+        priority.  Also, a firewall rule group name can be
+        configured.
+
+        The table is indexed by the object midcomConfigFirewallIndex.
+        For indexing a single interface, this object contains the
+        value of the ifIndex object that is associated with the
+        interface.  If an entry with midcomConfigFirewallIndex = 0
+        occurs, then bits set in objects of this entry apply to all
+        interfaces for which there is no entry in this table for the
+        interface's index."
+    ::= { midcomConfig 4 }
+
+midcomConfigFirewallEntry OBJECT-TYPE
+    SYNTAX      MidcomConfigFirewallEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "An entry describing a particular set of
+        firewall resources."
+    INDEX { midcomConfigFirewallIndex }
+    ::= { midcomConfigFirewallTable 1 }
+
+MidcomConfigFirewallEntry ::= SEQUENCE {
+    midcomConfigFirewallIndex      InterfaceIndexOrZero,
+    midcomConfigFirewallGroupId    SnmpAdminString,
+    midcomConfigFirewallPriority   Unsigned32
+}
+
+midcomConfigFirewallIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index of an entry in the midcomConfigFirewallTable.
+
+         For values different from 0, this object identifies an
+         IP interface by containing the same value as the ifIndex
+         object associated with the interface.
+
+         Note that the index of a particular interface in the
+         ifTable may change after a re-initialization of the
+         middlebox, for example, after adding another interface to
+         it.  In such a case, the value of this object may change,
+         but the interface referred to by the MIDCOM-MIB MUST still
+         be the same.  If, after a re-initialization of the
+         middlebox, the interface referred to before
+         re-initialization cannot be uniquely mapped anymore to a
+         particular entry in the ifTable, then the entry in the
+
+         midcomConfigFirewallTable MUST be deleted.
+
+         If the object has a value of 0, then values specified by
+         further objects of the same entry apply to all interfaces
+         for which there is no explicit entry in the
+         midcomConfigFirewallTable."
+    ::= { midcomConfigFirewallEntry 1 }
+
+midcomConfigFirewallGroupId OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The firewall rule group to which all firewall rules are
+        assigned that the MIDCOM server creates for the interface
+        indicated by object midcomConfigFirewallIndex.  If the
+        value of object midcomConfigFirewallIndex is 0, then all
+        firewall rules of the MIDCOM server that are created for
+        interfaces with no specific entry in the
+        midcomConfigFirewallTable are assigned to the firewall
+        rule group indicated by the value of this object."
+    ::= { midcomConfigFirewallEntry 2 }
+
+midcomConfigFirewallPriority OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The priority assigned to all firewall rules that the
+        MIDCOM server creates for the interface indicated by
+        object midcomConfigFirewallIndex.  If the value of object
+        midcomConfigFirewallIndex is 0, then this priority is
+        assigned to all firewall rules of the MIDCOM server that
+        are created for interfaces for which there is no specific
+        entry in the midcomConfigFirewallTable."
+    ::= { midcomConfigFirewallEntry 3 }
+
+--
+-- Monitoring Objects
+--
+-- Monitoring objects are structured into two groups,
+-- the midcomResourceGroup providing information about used
+-- resources and the midcomStatisticsGroup providing information
+-- about MIDCOM transaction statistics.
+
+--
+-- Resources subtree
+--
+
+-- The MIDCOM resources subtree contains a set of managed
+-- objects describing the currently used resources of NAT
+-- and firewall implementations.
+--
+
+--
+-- Textual conventions for objects of the resource subtree
+--
+
+MidcomNatBindMode ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "An indicator of the kind of NAT resources used by a policy
+        rule.  This definition corresponds to the definition of
+        NatBindMode in the NAT-MIB (RFC 4008).  Value none(3) can
+        be used to indicate that the policy rule does not use
+        any NAT binding.
+        "
+    SYNTAX      INTEGER {
+                    addressBind(1),
+                    addressPortBind(2),
+                    none(3)
+                }
+
+MidcomNatSessionIdOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+       "A unique ID that is assigned to each NAT session by
+        a NAT implementation.  This definition corresponds to
+        the definition of NatSessionId in the NAT-MIB (RFC 4008).
+        Value 0 can be used to indicate that the policy rule does
+        not use any NAT binding."
+    SYNTAX      Unsigned32
+
+--
+-- The MIDCOM resource table
+--
+
+midcomResourceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MidcomResourceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table lists all used middlebox resources per
+        MIDCOM policy rule.
+
+        The midcomResourceTable augments the
+
+        midcomRuleTable."
+    ::= { midcomMonitoring 1 }
+
+midcomResourceEntry OBJECT-TYPE
+    SYNTAX      MidcomResourceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "An entry describing a particular set of middlebox
+        resources."
+    AUGMENTS { midcomRuleEntry }
+    ::= { midcomResourceTable 1 }
+
+MidcomResourceEntry ::= SEQUENCE {
+    midcomRscNatInternalAddrBindMode   MidcomNatBindMode,
+    midcomRscNatInternalAddrBindId     NatBindIdOrZero,
+    midcomRscNatInsideAddrBindMode     MidcomNatBindMode,
+    midcomRscNatInsideAddrBindId       NatBindIdOrZero,
+    midcomRscNatSessionId1             MidcomNatSessionIdOrZero,
+    midcomRscNatSessionId2             MidcomNatSessionIdOrZero,
+    midcomRscFirewallRuleId            Unsigned32
+}
+
+midcomRscNatInternalAddrBindMode OBJECT-TYPE
+    SYNTAX      MidcomNatBindMode
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "An indication of whether this policy rule uses an address
+        NAT bind or an address-port NAT bind for binding the
+        internal address.
+
+        If the MIDCOM-MIB module is operated together with
+        the NAT-MIB module (RFC 4008) then object
+        midcomRscNatInternalAddrBindMode contains the same
+        value as the corresponding object
+        natSessionPrivateSrcEPBindMode of the NAT-MIB module."
+    ::= { midcomResourceEntry 4 }
+
+midcomRscNatInternalAddrBindId OBJECT-TYPE
+    SYNTAX      NatBindIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object references to the allocated internal NAT
+        bind that is used by this policy rule.  A NAT bind
+        describes the mapping of internal addresses to
+        outside addresses.  MIDCOM-MIB implementations can
+
+        read this object to learn the corresponding NAT bind
+        resource for this particular policy rule.
+
+        If the MIDCOM-MIB module is operated together with
+        the NAT-MIB module (RFC 4008) then object
+        midcomRscNatInternalAddrBindId contains the same
+        value as the corresponding object
+        natSessionPrivateSrcEPBindId of the NAT-MIB module."
+    ::= { midcomResourceEntry 5 }
+
+midcomRscNatInsideAddrBindMode OBJECT-TYPE
+    SYNTAX      MidcomNatBindMode
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "An indication of whether this policy rule uses an address
+        NAT bind or an address-port NAT bind for binding the
+        external address.
+
+        If the MIDCOM-MIB module is operated together with
+        the NAT-MIB module (RFC 4008), then object
+        midcomRscNatInsideAddrBindMode contains the same
+        value as the corresponding object
+        natSessionPrivateDstEPBindMode of the NAT-MIB module."
+    ::= { midcomResourceEntry 6 }
+
+midcomRscNatInsideAddrBindId OBJECT-TYPE
+    SYNTAX      NatBindIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object refers to the allocated external NAT
+        bind that is used by this policy rule.  A NAT bind
+        describes the mapping of external addresses to
+        inside addresses.  MIDCOM-MIB implementations can
+        read this object to learn the corresponding NAT bind
+        resource for this particular policy rule.
+
+        If the MIDCOM-MIB module is operated together with the
+        NAT-MIB module (RFC 4008), then object
+        midcomRscNatInsideAddrBindId contains the same
+        value as the corresponding object
+        natSessionPrivateDstEPBindId of the NAT-MIB module."
+    ::= { midcomResourceEntry 7 }
+
+midcomRscNatSessionId1 OBJECT-TYPE
+    SYNTAX      MidcomNatSessionIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object refers to the first allocated NAT session for
+        this policy rule.  MIDCOM-MIB implementations can read this
+        object to learn whether or not a NAT session for a
+        particular policy rule is used.  A value of 0 means that no
+        NAT session is allocated for this policy rule.  A value
+        other than 0 refers to the NAT session."
+   ::= { midcomResourceEntry 8 }
+
+midcomRscNatSessionId2 OBJECT-TYPE
+    SYNTAX      MidcomNatSessionIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object refers to the second allocated NAT session for
+        this policy rule.  MIDCOM-MIB implementations can read this
+        object to learn whether or not a NAT session for a
+        particular policy rule is used.  A value of 0 means that no
+        NAT session is allocated for this policy rule.  A value
+        other than 0 refers to the NAT session."
+    ::= { midcomResourceEntry 9 }
+
+midcomRscFirewallRuleId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object refers to the allocated firewall
+        rule in the firewall engine for this policy rule.
+        MIDCOM-MIB implementations can read this value to
+        learn whether a firewall rule for this particular
+        policy rule is used or not.  A value of 0 means that
+        no firewall rule is allocated for this policy rule.
+        A value other than 0 refers to the firewall rule
+        number within the firewall engine."
+    ::= { midcomResourceEntry 10 }
+
+--
+-- Statistics subtree
+--
+-- The MIDCOM statistics subtree contains a set of managed
+-- objects providing statistics about the usage of transaction
+-- objects.
+--
+
+midcomStatistics      OBJECT IDENTIFIER ::= { midcomMonitoring 2 }
+
+midcomCurrentOwners OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of different values for midcomRuleOwner
+        for all current entries in the midcomRuleTable."
+    ::= { midcomStatistics 1 }
+
+midcomTotalRejectedRuleEntries OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of failed attempts to create an entry
+        in the midcomRuleTable."
+    ::= { midcomStatistics 2 }
+
+midcomCurrentRulesIncomplete OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The current number of policy rules that are incomplete.
+
+        Policy rules are loaded via row entries in the
+        midcomRuleTable.  This object counts policy rules that are
+        loaded but not fully specified, i.e., they are in state
+        newEntry(1) or setting(2)."
+    ::= { midcomStatistics 3 }
+
+midcomTotalIncorrectReserveRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy reserve rules that failed
+        parameter check and entered state incorrectRequest(4)."
+    ::= { midcomStatistics 4 }
+
+midcomTotalRejectedReserveRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy reserve rules that failed
+        while being processed and entered state requestRejected(6)."
+    ::= { midcomStatistics 5 }
+
+midcomCurrentActiveReserveRules OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of currently active policy reserve rules."
+    ::= { midcomStatistics 6 }
+
+midcomTotalExpiredReserveRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of expired policy reserve rules
+        (entered termination state timedOut(9))."
+    ::= { midcomStatistics 7 }
+
+midcomTotalTerminatedOnRqReserveRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy reserve rules that were
+        terminated on request (entered termination state
+        terminatedOnRequest(10))."
+    ::= { midcomStatistics 8 }
+
+midcomTotalTerminatedReserveRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy reserve rules that were
+        terminated, but not on request (entered termination state
+        terminated(11))."
+    ::= { midcomStatistics 9 }
+
+midcomTotalIncorrectEnableRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy enable rules that failed
+        parameter check and entered state incorrectRequest(4)."
+    ::= { midcomStatistics 10 }
+
+midcomTotalRejectedEnableRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy enable rules that failed
+        while being processed and entered state requestRejected(6)."
+    ::= { midcomStatistics 11 }
+midcomCurrentActiveEnableRules OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of currently active policy enable rules."
+    ::= { midcomStatistics 12 }
+
+midcomTotalExpiredEnableRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of expired policy enable rules
+        (entered termination state timedOut(9))."
+    ::= { midcomStatistics 13 }
+
+midcomTotalTerminatedOnRqEnableRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy enable rules that were
+        terminated on request (entered termination state
+        terminatedOnRequest(10))."
+    ::= { midcomStatistics 14 }
+
+midcomTotalTerminatedEnableRules OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of policy enable rules that were
+        terminated, but not on request (entered termination state
+        terminated(11))."
+    ::= { midcomStatistics 15 }
+
+--
+-- Notifications.
+--
+
+midcomUnsolicitedRuleEvent NOTIFICATION-TYPE
+
+    OBJECTS     { midcomRuleOperStatus, midcomRuleLifetime }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated whenever the value of
+         midcomRuleOperStatus enters any error state or any
+         termination state without an explicit trigger by a
+         MIDCOM client."
+    ::= { midcomNotifications 1 }
+
+midcomSolicitedRuleEvent NOTIFICATION-TYPE
+    OBJECTS     { midcomRuleOperStatus, midcomRuleLifetime }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated whenever the value
+         of midcomRuleOperStatus enters one of the states
+         {reserved, enabled, any error state, any termination state}
+         as a result of a MIDCOM agent writing successfully to
+         object midcomRuleAdminStatus.
+
+         In addition, it is generated when the lifetime of
+         a rule was changed by successfully writing to object
+         midcomRuleLifetime."
+    ::= { midcomNotifications 2 }
+
+midcomSolicitedGroupEvent NOTIFICATION-TYPE
+    OBJECTS     { midcomGroupLifetime }
+    STATUS      current
+    DESCRIPTION
+        "This notification is generated for indicating that the
+         lifetime of all member rules of the group was changed by
+         successfully writing to object midcomGroupLifetime.
+
+         Note that this notification is only sent if the lifetime
+         of a group was changed by successfully writing to object
+         midcomGroupLifetime.  No notification is sent
+           - if a group's lifetime is changed by writing to object
+             midcomRuleLifetime of any of its member policies,
+           - if a group's lifetime expires (in this case,
+             notifications are sent for all member policies), or
+           - if the group is terminated by terminating the last
+             of its member policies without writing to object
+             midcomGroupLifetime."
+    ::= { midcomNotifications 3 }
+
+--
+-- Conformance information
+--
+
+midcomCompliances OBJECT IDENTIFIER ::= { midcomConformance 1 }
+midcomGroups      OBJECT IDENTIFIER ::= { midcomConformance 2 }
+
+--
+-- compliance statements
+--
+
+-- This is the MIDCOM compliance definition ...
+
+--
+
+midcomCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for implementations of the
+         MIDCOM-MIB module.
+
+         Note that compliance with this compliance
+         statement requires compliance with the
+         ifCompliance3 MODULE-COMPLIANCE statement of the
+         IF-MIB [RFC2863]."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+            midcomRuleGroup,
+            midcomNotificationsGroup,
+            midcomCapabilitiesGroup,
+            midcomStatisticsGroup
+    }
+    GROUP   midcomConfigFirewallGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the midcomConfigFirewallGroup."
+    GROUP   midcomResourceGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the midcomResourceGroup."
+    OBJECT midcomRuleInternalIpPrefixLength
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required.  When write access is
+        not supported, return 128 as the value of this object.
+        A value of 128 means that the function represented by
+        this option is not supported."
+    OBJECT midcomRuleExternalIpPrefixLength
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required.  When write access is
+        not supported, return 128 as the value of this object.
+
+        A value of 128 means that the function represented by
+        this option is not supported."
+    OBJECT midcomRuleMaxIdleTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required.  When write access is
+        not supported, return 0 as the value of this object.
+        A value of 0 means that the function represented by
+        this option is not supported."
+    OBJECT midcomRuleInterface
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required."
+    OBJECT midcomConfigMaxLifetime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required."
+    OBJECT midcomConfigPersistentRules
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required."
+    OBJECT midcomConfigIfEnabled
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required."
+    OBJECT midcomConfigFirewallGroupId
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required."
+    OBJECT midcomConfigFirewallPriority
+    MIN-ACCESS  read-only
+    DESCRIPTION
+       "Write access is not required."
+    ::= { midcomCompliances 1 }
+
+midcomRuleGroup OBJECT-GROUP
+    OBJECTS {
+        midcomRuleAdminStatus,
+        midcomRuleOperStatus,
+        midcomRuleStorageType,
+        midcomRuleStorageTime,
+        midcomRuleError,
+        midcomRuleInterface,
+        midcomRuleFlowDirection,
+        midcomRuleMaxIdleTime,
+        midcomRuleTransportProtocol,
+        midcomRulePortRange,
+        midcomRuleInternalIpVersion,
+        midcomRuleExternalIpVersion,
+        midcomRuleInternalIpAddr,
+        midcomRuleInternalIpPrefixLength,
+        midcomRuleInternalPort,
+        midcomRuleExternalIpAddr,
+        midcomRuleExternalIpPrefixLength,
+        midcomRuleExternalPort,
+        midcomRuleInsideIpAddr,
+        midcomRuleInsidePort,
+        midcomRuleOutsideIpAddr,
+        midcomRuleOutsidePort,
+        midcomRuleLifetime,
+        midcomRuleRowStatus,
+        midcomGroupLifetime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         policy rules and policy rule groups."
+    ::= { midcomGroups 1 }
+
+midcomCapabilitiesGroup OBJECT-GROUP
+    OBJECTS {
+        midcomConfigMaxLifetime,
+        midcomConfigPersistentRules,
+        midcomConfigIfBits,
+        midcomConfigIfEnabled
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         the capabilities of a middlebox."
+    ::= { midcomGroups 2 }
+
+midcomConfigFirewallGroup OBJECT-GROUP
+    OBJECTS {
+        midcomConfigFirewallGroupId,
+        midcomConfigFirewallPriority
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         the firewall rule group and firewall rule priority to
+         be used by firewalls loaded through MIDCOM."
+    ::= { midcomGroups 3 }
+
+midcomResourceGroup OBJECT-GROUP
+    OBJECTS {
+
+        midcomRscNatInternalAddrBindMode,
+        midcomRscNatInternalAddrBindId,
+        midcomRscNatInsideAddrBindMode,
+        midcomRscNatInsideAddrBindId,
+        midcomRscNatSessionId1,
+        midcomRscNatSessionId2,
+        midcomRscFirewallRuleId
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         the used NAT and firewall resources."
+    ::= { midcomGroups 4 }
+
+midcomStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        midcomCurrentOwners,
+        midcomTotalRejectedRuleEntries,
+        midcomCurrentRulesIncomplete,
+        midcomTotalIncorrectReserveRules,
+        midcomTotalRejectedReserveRules,
+        midcomCurrentActiveReserveRules,
+        midcomTotalExpiredReserveRules,
+        midcomTotalTerminatedOnRqReserveRules,
+        midcomTotalTerminatedReserveRules,
+        midcomTotalIncorrectEnableRules,
+        midcomTotalRejectedEnableRules,
+        midcomCurrentActiveEnableRules,
+        midcomTotalExpiredEnableRules,
+        midcomTotalTerminatedOnRqEnableRules,
+        midcomTotalTerminatedEnableRules
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing statistical
+         information about the MIDCOM server."
+    ::= { midcomGroups 5 }
+
+midcomNotificationsGroup NOTIFICATION-GROUP
+     NOTIFICATIONS {
+         midcomUnsolicitedRuleEvent,
+         midcomSolicitedRuleEvent,
+         midcomSolicitedGroupEvent
+     }
+     STATUS    current
+     DESCRIPTION
+         "The notifications emitted by the midcomMIB."
+     ::= { midcomGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/MIOX25-MIB.mib b/snmp_builder/mibs/MIOX25-MIB.mib
new file mode 100644
index 0000000..98614d7
--- /dev/null
+++ b/snmp_builder/mibs/MIOX25-MIB.mib
@@ -0,0 +1,708 @@
+MIOX25-MIB DEFINITIONS  ::= BEGIN
+
+IMPORTS
+        Counter,
+        TimeTicks
+                FROM RFC1155-SMI
+        OBJECT-TYPE
+                FROM RFC-1212
+        DisplayString, transmission,
+        ifIndex
+                FROM RFC1213-MIB
+        InstancePointer
+                FROM RFC1316-MIB
+        X121Address
+                FROM RFC1382-MIB
+        PositiveInteger
+                FROM RFC1381-MIB;
+
+                -- IP over X.25 MIB
+
+miox    OBJECT IDENTIFIER ::= { transmission 38 }
+
+mioxPle         OBJECT IDENTIFIER ::= { miox 1 }
+mioxPeer        OBJECT IDENTIFIER ::= { miox 2 }
+
+-- ###########################################################
+--              Ple Table
+-- ###########################################################
+
+-- Systems that implement RFC 1356 must also implement
+-- all objects in this group.
+
+mioxPleTable    OBJECT-TYPE
+        SYNTAX  SEQUENCE OF MioxPleEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table contains information relative to
+                an interface to an X.25 Packet Level Entity
+                (PLE)."
+        ::= { mioxPle 1   }
+
+mioxPleEntry    OBJECT-TYPE
+        SYNTAX  MioxPleEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "These objects manage the encapsulation of
+                other protocols within X.25."
+        INDEX { ifIndex }
+        ::= { mioxPleTable 1 }
+
+MioxPleEntry ::= SEQUENCE {
+        mioxPleMaxCircuits
+                INTEGER,
+        mioxPleRefusedConnections
+                Counter,
+        mioxPleEnAddrToX121LkupFlrs
+                Counter,
+        mioxPleLastFailedEnAddr
+                OCTET STRING,
+        mioxPleEnAddrToX121LkupFlrTime
+                TimeTicks,
+        mioxPleX121ToEnAddrLkupFlrs
+                Counter,
+        mioxPleLastFailedX121Address
+                X121Address,
+        mioxPleX121ToEnAddrLkupFlrTime
+                TimeTicks,
+        mioxPleQbitFailures
+                Counter,
+        mioxPleQbitFailureRemoteAddress
+                X121Address,
+        mioxPleQbitFailureTime
+                TimeTicks,
+        mioxPleMinimumOpenTimer
+                PositiveInteger,
+        mioxPleInactivityTimer
+                PositiveInteger,
+        mioxPleHoldDownTimer
+                PositiveInteger,
+        mioxPleCollisionRetryTimer
+
+                PositiveInteger,
+        mioxPleDefaultPeerId
+                InstancePointer
+        }
+
+mioxPleMaxCircuits OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The maximum number of X.25 circuits that
+                can be open at one time for this interface.
+                A value of zero indicates the interface will
+                not allow any additional circuits (as it may
+                soon be shutdown).  A value of 2147483647
+                allows an unlimited number of circuits."
+        ::= { mioxPleEntry 1 }
+
+mioxPleRefusedConnections OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of X.25 calls from a remote
+                systems to this system that were cleared by
+                this system.  The interface instance should
+                identify the X.25 interface the call came in
+                on."
+        ::= { mioxPleEntry 2 }
+
+mioxPleEnAddrToX121LkupFlrs OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times a translation from an
+                Encapsulated Address to an X.121 address
+                failed to find a corresponding X.121
+                address.  Encapsulated addresses can be
+                looked up in the mioxPeerTable or translated
+                via an algorithm as for the DDN.  Addresses
+                that are successfully recognized do not
+                increment this counter.  Addresses that are
+                not recognized (reflecting an abnormal
+                packet delivery condition) increment this
+                counter.
+
+                If an address translation fails, it may be
+
+                difficult to determine which PLE entry
+                should count the failure.  In such cases the
+                first likely entry in this table should be
+                selected.  Agents should record the failure
+                even if they are unsure which PLE should be
+                associated with the failure."
+        ::= { mioxPleEntry 3 }
+
+mioxPleLastFailedEnAddr OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(2..128))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The last Encapsulated address that failed
+                to find a corresponding X.121 address and
+                caused mioxPleEnAddrToX121LkupFlrs to be
+                incremented.  The first octet of this object
+                contains the encapsulation type, the
+                remaining octets contain the address of that
+                type that failed.  Thus for an IP address,
+                the length will be five octets, the first
+                octet will contain 204 (hex CC), and the
+                last four octets will contain the IP
+                address.  For a snap encapsulation, the
+                first byte would be 128 (hex 80) and the
+                rest of the octet string would have the snap
+                header."
+        ::= { mioxPleEntry 4 }
+
+mioxPleEnAddrToX121LkupFlrTime OBJECT-TYPE
+        SYNTAX  TimeTicks
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The most recent value of sysUpTime when the
+                translation from an Encapsulated Address to
+                X.121 address failed to find a corresponding
+                X.121 address."
+        ::= { mioxPleEntry 5 }
+
+mioxPleX121ToEnAddrLkupFlrs OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the translation from an
+                X.121 address to an Encapsulated Address
+
+                failed to find a corresponding Encapsulated
+                Address.  Addresses successfully recognized
+                by an algorithm do not increment this
+                counter.  This counter reflects the number
+                of times call acceptance encountered the
+                abnormal condition of not recognizing the
+                peer."
+        ::= { mioxPleEntry 6 }
+
+mioxPleLastFailedX121Address OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The last X.121 address that caused
+                mioxPleX121ToEnAddrLkupFlrs to increase."
+        ::= { mioxPleEntry 7 }
+
+mioxPleX121ToEnAddrLkupFlrTime OBJECT-TYPE
+        SYNTAX  TimeTicks
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The most recent value of sysUpTime when the
+                translation from an X.121 address to an
+                Encapsulated Address failed to find a
+                corresponding Encapsulated Address."
+        ::= { mioxPleEntry 8 }
+
+mioxPleQbitFailures OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times a connection was closed
+                because of a Q-bit failure."
+        ::= { mioxPleEntry 9 }
+
+mioxPleQbitFailureRemoteAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The remote address of the most recent
+                (last) connection that was closed because of
+                a Q-bit failure."
+        ::= { mioxPleEntry 10 }
+
+mioxPleQbitFailureTime OBJECT-TYPE
+        SYNTAX  TimeTicks
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The most recent value of sysUpTime when a
+                connection was closed because of a Q-bit
+                failure.  This will also be the last time
+                that mioxPleQbitFailures was incremented."
+        ::= { mioxPleEntry 11 }
+
+mioxPleMinimumOpenTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The minimum time in milliseconds this
+                interface will keep a connection open before
+                allowing it to be closed.  A value of zero
+                indicates no timer."
+        DEFVAL { 0 }
+        ::= { mioxPleEntry 12 }
+
+mioxPleInactivityTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The amount of time time in milliseconds
+                this interface will keep an idle connection
+                open before closing it.  A value of
+                2147483647 indicates no timer."
+        DEFVAL { 10000 }
+        ::= { mioxPleEntry 13 }
+
+mioxPleHoldDownTimer    OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The hold down timer in milliseconds.  This
+                is the minimum amount of time to wait before
+                trying another call to a host that was
+                previously unsuccessful.  A value of
+                2147483647 indicates the host will not be
+                retried."
+        DEFVAL { 0 }
+        ::= { mioxPleEntry 14 }
+
+mioxPleCollisionRetryTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Collision Retry Timer in milliseconds.
+                The time to delay between call attempts when
+                the maximum number of circuits is exceeded
+                in a call attempt."
+        DEFVAL { 0 }
+        ::= { mioxPleEntry 15 }
+
+mioxPleDefaultPeerId OBJECT-TYPE
+        SYNTAX  InstancePointer
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the instance of the index
+                in the mioxPeerTable for the default
+                parameters to use with this interface.
+
+                The entry identified by this object may have
+                a zero length Encapsulation address and a
+                zero length X.121 address.
+
+                These default parameters are used with
+                connections to hosts that do not have
+                entries in the mioxPeerTable.  Such
+                connections occur when using ddn-x25 IP-X.25
+                address mapping or when accepting
+                connections from other hosts not in the
+                mioxPeerTable.
+
+                The mioxPeerEncTable entry with the same
+                index as the mioxPeerTable entry specifies
+                the call encapsulation types this PLE will
+                accept for peers not in the mioxPeerTable.
+                If the mioxPeerEncTable doesn't contain any
+                entries, this PLE will not accept calls from
+                entries not in the mioxPeerTable."
+        ::= { mioxPleEntry 16 }
+
+-- ###########################################################
+--              Peer Table
+-- ###########################################################
+
+-- Systems that implement RFC 1356 must also implement
+-- all objects in this group.
+
+mioxPeerTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF MioxPeerEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table contains information about the
+                possible peers this machine may exchange
+                packets with."
+        ::= { mioxPeer 1 }
+
+mioxPeerEntry OBJECT-TYPE
+        SYNTAX  MioxPeerEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Per peer information."
+        INDEX { mioxPeerIndex   }
+        ::= { mioxPeerTable 1 }
+
+MioxPeerEntry ::= SEQUENCE {
+        mioxPeerIndex
+                PositiveInteger,
+        mioxPeerStatus
+                INTEGER,
+        mioxPeerMaxCircuits
+                PositiveInteger,
+        mioxPeerIfIndex
+                PositiveInteger,
+        mioxPeerConnectSeconds
+                Counter,
+        mioxPeerX25CallParamId
+                InstancePointer,
+        mioxPeerEnAddr
+                OCTET STRING,
+        mioxPeerX121Address
+                X121Address,
+        mioxPeerX25CircuitId
+                InstancePointer,
+        mioxPeerDescr
+                DisplayString
+        }
+
+mioxPeerIndex   OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "An index value that distinguished one entry
+                from another.  This index is independent of
+                any other index."
+        ::= { mioxPeerEntry 1 }
+
+-- Systems can claim conformance with this MIB without
+-- implementing sets to mioxPeerStatus with a value of
+-- clearCall or makeCall.
+-- All other defined values must be accepted.
+-- Implementors should realize that allowing these values
+-- provides richer management, and implementations
+-- are encouraged to accept these values.
+mioxPeerStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        valid (1),
+                        createRequest (2),
+                        underCreation (3),
+                        invalid (4),
+                        clearCall (5),
+                        makeCall (6)
+                        }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This reports the status of a peer entry.
+                A value of valid indicates a normal entry
+                that is in use by the agent.  A value of
+                underCreation indicates a newly created
+                entry which isn't yet in use because the
+                creating management station is still setting
+                values.
+
+                The value of invalid indicates the entry is
+                no longer in use and the agent is free to
+                delete the entry at any time.  A management
+                station is also free to use an entry in the
+                invalid state.
+
+                Entries are created by setting a value of
+                createRequest.  Only non-existent or invalid
+                entries can be set to createRequest.  Upon
+                receiving a valid createRequest, the agent
+                will create an entry in the underCreation
+                state.  This object can not be set to a
+                value of underCreation directly, entries can
+
+                only be created by setting a value of
+                createRequest.  Entries that exist in other
+                than the invalid state can not be set to
+                createRequest.
+
+                Entries with a value of underCreation are
+                not used by the system and the management
+                station can change the values of other
+                objects in the table entry.  Management
+                stations should also remember to configure
+                values in the mioxPeerEncTable with the same
+                peer index value as this peer entry.
+
+                An entry in the underCreation state can be
+                set to valid or invalid.  Entries in the
+                underCreation state will stay in that state
+                until 1) the agent times them out, 2) they
+                are set to valid, 3) they are set to
+                invalid.  If an agent notices an entry has
+                been in the underCreation state for an
+                abnormally long time, it may decide the
+                management station has failed and invalidate
+                the entry.  A prudent agent will understand
+                that the management station may need to wait
+                for human input and will allow for that
+                possibility in its determination of this
+                abnormally long period.
+
+                Once a management station has completed all
+                fields of an entry, it will set a value of
+                valid.  This causes the entry to be
+                activated.
+
+                Entries in the valid state may also be set
+                to makeCall or clearCall to make or clear
+                X.25 calls to the peer.  After such a set
+                request the entry will still be in the valid
+                state.  Setting a value of makeCall causes
+                the agent to initiate an X.25 call request
+                to the peer specified by the entry.  Setting
+                a value of clearCall causes the agent to
+                initiate clearing one X.25 call present to
+                the peer.  Each set request will initiate
+                another call or clear request (up to the
+                maximum allowed); this means that management
+                stations that fail to get a response to a
+                set request should query to see if a call
+                was in fact placed or cleared before
+
+                retrying the request.  Entries not in the
+                valid state can not be set to makeCall or
+                clearCall.
+
+                The values of makeCall and clearCall provide
+                for circuit control on devices which perform
+                Ethernet Bridging using static circuit
+                assignment without address recognition;
+                other devices which dynamically place calls
+                based on destination addresses may reject
+                such requests.
+
+                An agent that (re)creates a new entry
+                because of a set with createRequest, should
+                also (re)create a mioxPeerEncTable entry
+                with a mioxPeerEncIndex of 1, and a
+                mioxPeerEncType of 204 (hex CC)."
+        ::= { mioxPeerEntry 2 }
+
+mioxPeerMaxCircuits OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS    mandatory
+        DESCRIPTION
+                "The maximum number of X.25 circuits allowed
+                to this peer."
+        DEFVAL { 1 }
+        ::= { mioxPeerEntry 3 }
+
+mioxPeerIfIndex OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of the ifIndex object for the
+                interface to X.25 to use to call the peer."
+        DEFVAL { 1 }
+        ::= { mioxPeerEntry 4 }
+
+mioxPeerConnectSeconds OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of seconds a call to this peer
+                was active.  This counter will be
+                incremented by one for every second a
+                connection to a peer was open.  If two calls
+
+                are open at the same time, one second of
+                elapsed real time will results in two
+                seconds of connect time."
+        ::= { mioxPeerEntry 5 }
+
+mioxPeerX25CallParamId OBJECT-TYPE
+        SYNTAX  InstancePointer
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The instance of the index object in the
+                x25CallParmTable from RFC 1382 for the X.25
+                call parameters used to communicate with the
+                remote host.  The well known value {0 0}
+                indicates no call parameters specified."
+        DEFVAL { {0 0} }
+        ::= { mioxPeerEntry 6 }
+
+mioxPeerEnAddr  OBJECT-TYPE
+        SYNTAX    OCTET STRING (SIZE (0..128))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Encapsulation address of the remote
+                host mapped by this table entry.  A length
+                of zero indicates the remote IP address is
+                unknown or unspecified for use as a PLE
+                default.
+
+                The first octet of this object contains the
+                encapsulation type, the remaining octets
+                contain an address of that type.  Thus for
+                an IP address, the length will be five
+                octets, the first octet will contain 204
+                (hex CC), and the last four octets will
+                contain the IP address.  For a snap
+                encapsulation, the first byte would be 128
+                (hex 80) and the rest of the octet string
+                would have the snap header."
+        DEFVAL { ''h }
+        ::= { mioxPeerEntry 7 }
+
+mioxPeerX121Address OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The X.25 address of the remote host mapped
+
+                by this table entry.  A zero length string
+                indicates the X.25 address is unspecified
+                for use as the PLE default."
+        DEFVAL { ''h }
+        ::= { mioxPeerEntry 8 }
+
+-- Systems can claim conformance to this MIB without
+-- implementing sets to mioxPeerX25CircuitId.
+-- However systems that use PVCs with RFC1356
+-- are encouraged to implement sets.
+mioxPeerX25CircuitId OBJECT-TYPE
+        SYNTAX  InstancePointer
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This object identifies the instance of the
+                index for the X.25 circuit open to the peer
+                mapped by this table entry.  The well known
+                value {0 0} indicates no connection
+                currently active.  For multiple connections,
+                this identifies the index of a multiplexing
+                table entry for the connections.  This can
+                only be written to configure use of PVCs
+                which means the identified circuit table
+                entry for a write must be a PVC."
+        DEFVAL { {0 0} }
+        ::= { mioxPeerEntry 9 }
+
+mioxPeerDescr   OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This object returns any identification
+                information about the peer.  An agent may
+                supply the comment information found in the
+                configuration file entry for this peer.  A
+                zero length string indicates no information
+                available."
+        DEFVAL { ''h }
+        ::= { mioxPeerEntry 10 }
+
+-- ###########################################################
+--              Peer Encapsulation Table
+-- ###########################################################
+
+mioxPeerEncTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF MioxPeerEncEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table contains the list of
+                encapsulations used to communicate with a
+                peer.  This table has two indexes, the first
+                identifies the peer, the second
+                distinguishes encapsulation types.
+
+                The first index identifies the corresponding
+                entry in the mioxPeerTable.  The second
+                index gives the priority of the different
+                encapsulations.
+
+                The encapsulation types are ordered in
+                priority order.  For calling a peer, the
+                first entry (mioxPeerEncIndex of 1) is tried
+                first.  If the call doesn't succeed because
+                the remote host clears the call due to
+                incompatible call user data, the next entry
+                in the list is tried.  Each entry is tried
+                until the list is exhausted.
+
+                For answering a call, the encapsulation type
+                requested by the peer must be found the list
+                or the call will be refused.  If there are
+                no entries in this table for a peer, all
+                call requests from the peer will be refused.
+
+                Objects in this table can only be set when
+                the mioxPeerStatus object with the same
+                index has a value of underCreation.  When
+                that status object is set to invalid and
+                deleted, the entry in this table with that
+                peer index must also be deleted."
+        ::= { mioxPeer 2 }
+
+mioxPeerEncEntry OBJECT-TYPE
+        SYNTAX  MioxPeerEncEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Per connection information."
+        INDEX { mioxPeerIndex, mioxPeerEncIndex}
+        ::= { mioxPeerEncTable 1 }
+
+MioxPeerEncEntry ::= SEQUENCE {
+        mioxPeerEncIndex
+                PositiveInteger,
+        mioxPeerEncType
+                INTEGER
+        }
+
+mioxPeerEncIndex        OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS    mandatory
+        DESCRIPTION
+                "The second index in the table which
+                distinguishes different encapsulation
+                types."
+        ::= { mioxPeerEncEntry 1 }
+
+mioxPeerEncType OBJECT-TYPE
+        SYNTAX  INTEGER (0..256)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of the encapsulation type.  For
+                IP encapsulation this will have a value of
+                204 (hex CC).  For SNAP encapsulated
+                packets, this will have a value of 128 (hex
+                80).  For CLNP, ISO 8473, this will have a
+                value of 129 (hex 81).  For ES-ES, ISO 9542,
+                this will have a value of 130 (hex 82).  A
+                value of 197 (hex C5) identifies the Blacker
+                X.25 encapsulation.  A value of 0,
+                identifies the Null encapsulation.
+
+                This value can only be written when the
+                mioxPeerStatus object with the same
+                mioxPeerIndex has a value of underCreation.
+                Setting this object to a value of 256
+                deletes the entry.  When deleting an entry,
+                all other entries in the mioxPeerEncTable
+                with the same mioxPeerIndex and with an
+                mioxPeerEncIndex higher then the deleted
+                entry, will all have their mioxPeerEncIndex
+                values decremented by one."
+        ::= { mioxPeerEncEntry 2 }
+
+-- ###########################################################
+
+END
diff --git a/snmp_builder/mibs/MIP-MIB.mib b/snmp_builder/mibs/MIP-MIB.mib
new file mode 100644
index 0000000..b09ada3
--- /dev/null
+++ b/snmp_builder/mibs/MIP-MIB.mib
@@ -0,0 +1,2127 @@
+    MIP-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        Counter32, Gauge32, Integer32, IpAddress, mib-2,
+        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
+                                        FROM SNMPv2-SMI
+        RowStatus, TruthValue, TimeStamp,
+        TEXTUAL-CONVENTION
+                                        FROM SNMPv2-TC
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                                        FROM SNMPv2-CONF;
+
+    mipMIB    MODULE-IDENTITY
+        LAST-UPDATED    "9606040000Z"
+        ORGANIZATION    "IETF Mobile IP Working Group"
+        CONTACT-INFO
+                "       David Cong
+                Postal: Motorola
+                        1301 E. Algonquin Rd.
+                        Schaumburg, IL 60196
+                Phone:  +1-847-576-1357
+                Email:  cong@comm.mot.com"
+        DESCRIPTION
+                "The MIB Module for the Mobile IP."
+        ::= { mib-2 44 }
+
+    mipMIBObjects    OBJECT IDENTIFIER ::= { mipMIB 1 }
+
+    -- Groups under mipMIBObjects
+
+    mipSystem    OBJECT IDENTIFIER ::= { mipMIBObjects 1 }
+    mipSecurity    OBJECT IDENTIFIER ::= { mipMIBObjects 2 }
+    mipMN    OBJECT IDENTIFIER ::= { mipMIBObjects 3 }
+    mipMA    OBJECT IDENTIFIER ::= { mipMIBObjects 4 }
+    mipFA    OBJECT IDENTIFIER ::= { mipMIBObjects 5 }
+    mipHA    OBJECT IDENTIFIER ::= { mipMIBObjects 6 }
+
+    mnSystem    OBJECT IDENTIFIER ::= { mipMN 1 }
+    mnDiscovery    OBJECT IDENTIFIER ::= { mipMN 2 }
+    mnRegistration    OBJECT IDENTIFIER ::= { mipMN 3 }
+
+    maAdvertisement    OBJECT IDENTIFIER ::= { mipMA 2 }
+
+    faSystem   OBJECT IDENTIFIER ::= { mipFA 1 }
+    faAdvertisement   OBJECT IDENTIFIER ::= { mipFA 2 }
+    faRegistration    OBJECT IDENTIFIER ::= { mipFA 3 }
+
+    haRegistration    OBJECT IDENTIFIER ::= { mipHA 3 }
+
+    -- Textual convention
+
+    RegistrationFlags  ::= TEXTUAL-CONVENTION
+        STATUS      current
+        DESCRIPTION
+                "This data type is used to define the registration
+                flags for Mobile IP registration extension:
+                   vjCompression
+                       -- Request to use VJ compression
+                   gre
+                       -- Request to use GRE
+                   minEnc
+                       -- Request to use minimal encapsulation
+                   decapsulationByMN
+                       -- Decapsulation by mobile node
+                   broadcastDatagram
+                       -- Request to receive broadcasts
+                   simultaneoursBindings
+                       -- Request to retain prior binding(s)."
+        SYNTAX      BITS {
+                         vjCompression(0),
+                         gre(1),
+                         minEnc(2),
+                         decapsulationbyMN(3),
+                         broadcastDatagram(4),
+                         simultaneousBindings(5)
+                    }
+
+    -- mipSystem Group
+
+    mipEntities OBJECT-TYPE
+        SYNTAX      BITS {
+                         mobileNode(0),
+                         foreignAgent(1),
+                         homeAgent(2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object describes which Mobile IP entities are
+                supported by this managed entity. The entity may
+                support more than one Mobile IP entities. For example,
+                the entity supports both Foreign Agent (FA) and Home
+                Agent (HA). Therefore, bit 1 and bit 2 are set to 1
+                for this object."
+        ::= { mipSystem 1 }
+
+    mipEnable OBJECT-TYPE
+        SYNTAX      INTEGER { enabled(1), disabled(2) }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "Indicates whether the Mobile IP protocol should be
+                enabled for the managed entity. If it is disabled, the
+                entity should disable both agent discovery and
+                registration functions."
+        ::= { mipSystem 2 }
+
+    mipEncapsulationSupported   OBJECT-TYPE
+        SYNTAX      BITS {
+                         ipInIp(0),
+                         gre(1),
+                         minEnc(2),
+                         other(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Encapsulation methods supported by the Mobile IP
+                entity. The entity may support multiple encapsulation
+                methods or none of them:
+                    ipInIp(0), -- IP Encapsulation within IP
+                    gre(1),    -- Generic Routing Encapsulation,
+                               -- refers to RFC1701
+                    minEnc(2), -- Minimal Encapsulation within IP."
+        ::= { mipSystem 3 }
+
+    -- mipSecurity Group
+
+    mipSecAssocTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF MipSecAssocEntry
+        MAX-ACCESS      not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing Mobility Security Associations."
+        ::= { mipSecurity 1 }
+
+    mipSecAssocEntry OBJECT-TYPE
+        SYNTAX      MipSecAssocEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "One particular Mobility Security Association."
+        INDEX   { mipSecPeerAddress, mipSecSPI }
+        ::= { mipSecAssocTable 1 }
+
+    MipSecAssocEntry ::=
+        SEQUENCE {
+            mipSecPeerAddress IpAddress,
+            mipSecSPI Unsigned32,
+            mipSecAlgorithmType INTEGER,
+            mipSecAlgorithmMode INTEGER,
+            mipSecKey OCTET STRING,
+            mipSecReplayMethod INTEGER
+        }
+
+    mipSecPeerAddress  OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The IP address of the peer entity with which this
+                node shares the mobility security association."
+        ::= { mipSecAssocEntry 1 }
+
+    mipSecSPI OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..4294967295)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The SPI is the 4-byte opaque index within the
+                Mobility Security Association which selects the
+                specific security parameters to be used to
+                authenticate the peer, i.e. the rest of the variables
+                in this MipSecAssocEntry."
+        ::= { mipSecAssocEntry 2 }
+
+    mipSecAlgorithmType OBJECT-TYPE
+        SYNTAX      INTEGER {
+                            other(1),
+                            md5(2)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "Type of security algorithm."
+        ::= { mipSecAssocEntry 3 }
+
+    mipSecAlgorithmMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                            other(1),
+                            prefixSuffix(2)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "Security mode used by this algorithm."
+        ::= { mipSecAssocEntry 4 }
+
+    mipSecKey  OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The shared secret key for the security
+                associations. Reading this object will always return
+                zero length value."
+        ::= { mipSecAssocEntry 5 }
+
+    mipSecReplayMethod OBJECT-TYPE
+        SYNTAX      INTEGER {
+                             other(1),
+                             timestamps(2),
+                             nonces(3)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The replay-protection method supported for this SPI
+                within this Mobility Security Association."
+        ::= { mipSecAssocEntry 6 }
+
+    -- Mobile IP security violation total counter
+
+    mipSecTotalViolations OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "Total number of security violations in the entity"
+           ::= { mipSecurity 2 }
+
+    -- Mobile IP security violation table
+
+    mipSecViolationTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF MipSecViolationEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing information about security
+                violations."
+        ::= { mipSecurity 3 }
+
+    mipSecViolationEntry  OBJECT-TYPE
+        SYNTAX      MipSecViolationEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Information about one particular security violation."
+        INDEX   { mipSecViolatorAddress }
+        ::= { mipSecViolationTable 1 }
+
+    MipSecViolationEntry ::=
+        SEQUENCE {
+            mipSecViolatorAddress IpAddress,
+            mipSecViolationCounter Counter32,
+            mipSecRecentViolationSPI Integer32,
+            mipSecRecentViolationTime TimeStamp,
+            mipSecRecentViolationIDLow Integer32,
+            mipSecRecentViolationIDHigh Integer32,
+            mipSecRecentViolationReason INTEGER
+        }
+
+    mipSecViolatorAddress  OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+                "Violator's IP address. The violator is not necessary
+                in the mipSecAssocTable."
+        ::= { mipSecViolationEntry 1 }
+
+    mipSecViolationCounter OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of security violations for this peer."
+        ::= { mipSecViolationEntry 2 }
+
+    mipSecRecentViolationSPI  OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "SPI of the most recent security violation for this
+                peer. If the security violation is due to an
+                identification mismatch, then this is the SPI from the
+                Mobile-Home Authentication Extension.  If the security
+                violation is due to an invalid authenticator, then
+                this is the SPI from the offending authentication
+
+                extension.  In all other cases, it should be set to
+                zero."
+        ::= { mipSecViolationEntry 3 }
+
+    mipSecRecentViolationTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Time of the most recent security violation for this
+                peer."
+        ::= { mipSecViolationEntry 4 }
+
+    mipSecRecentViolationIDLow  OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "Low-order 32 bits of identification used in request or
+                reply of the most recent security violation for this
+                peer."
+        ::= { mipSecViolationEntry 5 }
+
+    mipSecRecentViolationIDHigh  OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "High-order 32 bits of identification used in request
+                or reply of the most recent security violation for
+                this peer."
+        ::= { mipSecViolationEntry 6 }
+
+    mipSecRecentViolationReason   OBJECT-TYPE
+        SYNTAX      INTEGER {
+                            noMobilitySecurityAssociation(1),
+                            badAuthenticator(2),
+                            badIdentifier(3),
+                            badSPI(4),
+                            missingSecurityExtension(5),
+                            other(6)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Reason for the most recent security violation for
+                this peer."
+        ::= { mipSecViolationEntry 7 }
+
+    -- mipMN Group
+    -- mipSystem Group
+
+    mnState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                            home(1),
+                            registered(2),
+                            pending(3),
+                            isolated(4),
+                            unknown(5)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Indicates mobile node's state of Mobile IP:
+                     home,
+                         -- MN is connected to home network.
+                     registered,
+                         -- MN has registered on foreign network
+                     pending,
+                         -- MN has sent registration request and is
+                            waiting for the reply
+                     isolated,
+                         -- MN is isolated from network
+                     unknown
+                         -- MN can not determine its state."
+        ::= { mnSystem 1 }
+
+    mnHomeAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "An IP address that is assigned for an extended period
+                of time to the mobile node. It remains unchanged
+                regardless of the mobile node's current point of
+                attachment."
+        ::= { mnSystem 2 }
+
+   -- Mobile node's home agent list
+
+    mnHATable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF MnHAEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing all of the mobile node's potential
+                home agents."
+        ::= { mnSystem 3 }
+
+    mnHAEntry OBJECT-TYPE
+        SYNTAX MnHAEntry
+        MAX-ACCESS not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Information for a particular Home Agent."
+        INDEX { mnHAAddress }
+        ::= { mnHATable 1 }
+
+    MnHAEntry ::= SEQUENCE {
+        mnHAAddress IpAddress,
+        mnCurrentHA TruthValue,
+        mnHAStatus  RowStatus
+    }
+
+    mnHAAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "IP address of mobile node's Home Agent."
+        ::= { mnHAEntry 1 }
+
+    mnCurrentHA OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Whether this home agent is the current home agent for
+                the mobile node. If it is true, the mobile node is
+                registered with that home agent."
+        ::= { mnHAEntry 2 }
+
+    mnHAStatus  OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The row status for this home agent entry. If the
+                status is set to 'createAndGo' or 'active', then the
+                mobile node can use mnHAAddress as a valid candidate
+                for a home agent. If the status is set to 'destroy',
+                then the mobile node should delete this row, and
+                deregister from that home agent."
+        ::= { mnHAEntry 3 }
+
+    mnFATable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF MnFAEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing all foreign agents that the mobile
+                node knows about and their corresponding COA (care-of
+                address). This COA is an address of a foreign agent
+                with which the mobile node is registered. The table is
+                updated when advertisements are received by the mobile
+                node. If an advertisement expires, its entry(s) should
+                be deleted from the table. One foreign agent can
+                provide more than one COA in its advertisements."
+        ::= { mnDiscovery 1 }
+
+    mnFAEntry OBJECT-TYPE
+        SYNTAX      MnFAEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "One pair of foreign agent IP address and COA for that
+                foreign agent."
+        INDEX { mnFAAddress, mnCOA }
+        ::= { mnFATable 1 }
+
+    MnFAEntry ::= SEQUENCE {
+        mnFAAddress IpAddress,
+        mnCOA IpAddress
+    }
+
+    mnFAAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Foreign agent's IP address."
+        ::= { mnFAEntry 1 }
+
+    mnCOA   OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "A care-of address being offered by this foreign agent
+                or a co-located care-of address which the mobile node
+                has associated with one of its own network
+
+                interfaces."
+        ::= { mnFAEntry 2 }
+
+   -- Mobile node could store multiple agent advertisements, however,
+   -- only the most recently received agent advertisement information
+   -- is required to be made available to the manager station.
+
+    mnRecentAdvReceived OBJECT IDENTIFIER ::= { mnDiscovery 2 }
+
+    mnAdvSourceAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The source IP address of the most recently received
+                Agent Advertisement. This address could be the address
+                of a home agent or a foreign agent."
+        ::= { mnRecentAdvReceived 1 }
+
+    mnAdvSequence OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The sequence number of the most recently received
+                advertisement. The sequence number ranges from 0 to
+                0xffff. After the sequence number attains the value
+                0xffff, it will roll over to 256."
+        ::= { mnRecentAdvReceived 2 }
+
+    mnAdvFlags OBJECT-TYPE
+        SYNTAX      BITS {
+                         vjCompression(0),
+                         gre(1),
+                         minEnc(2),
+                         foreignAgent(3),
+                         homeAgent(4),
+                         busy(5),
+                         regRequired(6)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The flags are contained in the 7th byte in the
+                extension of the most recently received mobility agent
+                advertisement:
+                    vjCompression
+                        -- Agent supports Van Jacobson compression
+
+                    gre
+                        -- Agent offers Generice Routing Encapsulation
+                    minEnc,
+                        -- Agent offers Minimal Encapsulation
+                    foreignAgent,
+                        -- Agent is a Foreign Agent
+                    homeAgent,
+                        -- Agent is a Home Agent
+                    busy,
+                        -- Foreign Agent is busy
+                    regRequired,
+                        -- FA registration is required."
+        ::= { mnRecentAdvReceived 3 }
+
+    mnAdvMaxRegLifetime OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The longest lifetime in seconds that the agent is
+                willing to accept in any registration request."
+        ::= { mnRecentAdvReceived 4 }
+
+    mnAdvMaxAdvLifetime OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The maximum length of time that the Advertisement is
+                considered valid in the absence of further
+                Advertisements."
+        REFERENCE
+                "AdvertisementLifeTime in RFC1256."
+        ::= { mnRecentAdvReceived 5 }
+
+    mnAdvTimeReceived OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the most recently received
+                advertisement was received."
+        ::= { mnRecentAdvReceived 6 }
+
+   -- Mobile Node Discovery Group Counter
+
+    mnSolicitationsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Solicitation sent by the mobile
+                node."
+        ::= { mnDiscovery 3 }
+
+    mnAdvertisementsReceived OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of advertisements received by the mobile
+                node."
+        ::= { mnDiscovery 4 }
+
+    mnAdvsDroppedInvalidExtension OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of advertisements dropped by the mobile
+                node due to both poorly formed extensions and
+                unrecognized extensions with extension number in the
+                range 0-127."
+        ::= { mnDiscovery 5 }
+
+    mnAdvsIgnoredUnknownExtension OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of unrecognized extensions in the range
+                128-255 that were ignored by the mobile node."
+        ::= { mnDiscovery 6 }
+
+    mnMoveFromHAToFA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times that the mobile node has decided to
+                move from its home network to a foreign network."
+        ::= { mnDiscovery 7 }
+
+    mnMoveFromFAToFA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times that the mobile node has decided to
+                move from one foreign network to another foreign
+                network."
+        ::= { mnDiscovery 8 }
+
+    mnMoveFromFAToHA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times that the mobile node has decided to
+                move from a foreign network to its home network."
+        ::= { mnDiscovery 9 }
+
+    mnGratuitousARPsSend OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Gratuitous ARPs sent by mobile node
+                in order to clear out any stale ARP entries in the ARP
+                caches of nodes on the home network."
+        ::= { mnDiscovery 10 }
+
+    mnAgentRebootsDectected OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of agent reboots detected by the mobile
+                node through sequence number of the advertisement."
+        ::= { mnDiscovery 11 }
+
+    -- Mobile Node Registration Group
+
+    -- Registration table of mobile node
+
+    mnRegistrationTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF MnRegistrationEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing information about the mobile
+                node's attempted registration(s).  The mobile node
+
+                updates this table based upon Registration Requests
+                sent and Registration Replies received in response to
+                these requests.  Certain variables within this table
+                are also updated if when Registration Requests are
+                retransmitted."
+        ::= { mnRegistration 1 }
+
+    mnRegistrationEntry OBJECT-TYPE
+        SYNTAX      MnRegistrationEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Information about one registration attempt."
+        INDEX { mnRegAgentAddress, mnRegCOA}
+        ::= { mnRegistrationTable 1 }
+
+    MnRegistrationEntry ::= SEQUENCE {
+        mnRegAgentAddress IpAddress,
+        mnRegCOA IpAddress,
+        mnRegFlags RegistrationFlags,
+        mnRegIDLow Integer32,
+        mnRegIDHigh Integer32,
+        mnRegTimeRequested Integer32,
+        mnRegTimeRemaining  Gauge32,
+        mnRegTimeSent    TimeStamp,
+        mnRegIsAccepted  TruthValue,
+        mnCOAIsLocal     TruthValue
+        }
+
+    mnRegAgentAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                 "IP address of the agent as used in the destination
+                 IP address of the Registration Request.  The agent
+                 may be a home agent or a foreign agent."
+        ::= { mnRegistrationEntry 1 }
+
+    mnRegCOA OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Care-of address for the registration."
+        ::= { mnRegistrationEntry 2 }
+
+    mnRegFlags OBJECT-TYPE
+        SYNTAX      RegistrationFlags
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Registration flags sent by the mobile node. It is the
+                second byte in the Mobile IP Registratation Request
+                message."
+        ::= { mnRegistrationEntry 3 }
+
+    mnRegIDLow OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Low-order 32 bits of the Identification used in that
+                registration by the mobile node."
+        ::= { mnRegistrationEntry 4 }
+
+    mnRegIDHigh OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "High-order 32 bits of the Identification used in that
+                registration by the mobile node."
+        ::= { mnRegistrationEntry 5 }
+
+    mnRegTimeRequested OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "If the registration is pending, then this is the
+                lifetime requested by the mobile node (in seconds).
+                If the registration has been accepted, then this is
+                the lifetime actually granted by the home agent in the
+                reply."
+        ::= { mnRegistrationEntry 6 }
+
+    mnRegTimeRemaining OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of seconds remaining until this
+                registration expires.  It has the same initial value
+
+                as mnRegTimeRequested and is only valid if
+                mnRegIsAccepted is TRUE."
+        ::= { mnRegistrationEntry 7 }
+
+    mnRegTimeSent OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time when the last (re-)transmission occured."
+        ::= { mnRegistrationEntry 8 }
+
+    mnRegIsAccepted OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "true(1) if the mobile node has received a
+                Registration Reply indicating that service has been
+                accepted; false(2) otherwise.  false(2) implies that
+                the registration is still pending."
+        ::= { mnRegistrationEntry 9 }
+
+    mnCOAIsLocal OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Whether the COA is local to (dynamically acquired by)
+                the mobile node or not.  If it is false(2), the COA is
+                an address of the foreign agent."
+        ::= { mnRegistrationEntry 10 }
+
+    -- Mobile Node Registration Group Counters
+
+    mnRegRequestsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of registration requests sent by the
+                mobile node. This does not include deregistrations
+                (those with Lifetime equal to zero)."
+        ::= { mnRegistration 2 }
+
+    mnDeRegRequestsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of deregistration requests sent by the
+                mobile node (those with Lifetime equal to zero)."
+        ::= { mnRegistration 3 }
+
+    mnRegRepliesRecieved OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of registration replies received by the
+                mobile node in which the Lifetime is greater than
+                zero."
+        ::= { mnRegistration 4 }
+
+    mnDeRegRepliesRecieved OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of (de)registration replies received by
+                the mobile node in which the Lifetime is equal to
+                zero."
+        ::= { mnRegistration 5 }
+
+    mnRepliesInvalidHomeAddress OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of replies with invalid home address for
+                the mobile node."
+        ::= { mnRegistration 6 }
+
+    mnRepliesUnknownHA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of replies with unknown home agents
+                (not in home agent table)."
+        ::= { mnRegistration 7 }
+
+    mnRepliesUnknownFA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of replies with unknown foreign agents if
+                replies relayed through foreign agent."
+        ::= { mnRegistration 8 }
+
+    mnRepliesInvalidID OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of replies with invalid Identification
+                fields."
+        ::= { mnRegistration 9 }
+
+    mnRepliesDroppedInvalidExtension OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Replies dropped by the
+                mobile node due to both poorly formed extensions and
+                unrecognized extensions with extension number in the
+                range 0-127."
+        ::= { mnRegistration 10 }
+
+    mnRepliesIgnoredUnknownExtension OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Replies that contained
+                one or more unrecognized extensions in the range
+                128-255 that were ignored by the mobile node."
+        ::= { mnRegistration 11 }
+
+    mnRepliesHAAuthenticationFailure OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of replies without a valid Home Agent to
+                Mobile Node authenticator."
+        ::= { mnRegistration 12 }
+
+    mnRepliesFAAuthenticationFailure OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of replies without a valid Foreign Agent
+                to Mobile Node authenticator."
+        ::= { mnRegistration 13 }
+
+    mnRegRequestsAccepted OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of registration requests accepted by the
+                mobile node's home agent (Code 0 and Code 1)."
+        ::= { mnRegistration 14 }
+
+    mnRegRequestsDeniedByHA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of registration requests denied by
+                mobile node's home agent (Sum of Code 128 through
+                Code 191)."
+        ::= { mnRegistration 15 }
+
+    mnRegRequestsDeniedByFA OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of registration requests denied by the
+                foreign agent (Sum of Codes 64 through Code 127)."
+        ::= { mnRegistration 16 }
+
+    mnRegRequestsDeniedByHADueToID OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Request denied by home
+                agent due to identification mismatch."
+        ::= { mnRegistration 17 }
+
+    mnRegRequestsWithDirectedBroadcast OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests sent by mobile
+
+                node with a directed broadcast address in the home
+                agent field."
+        ::= { mnRegistration 18 }
+
+    -- MA Advertisement Group
+
+    -- Mobility agent advertisement configuration table
+
+    maAdvConfigTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF MaAdvConfigEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing configurable advertisement
+                parameters for all advertisement interfaces in
+                the mobility agent."
+        ::= { maAdvertisement 1 }
+
+    maAdvConfigEntry OBJECT-TYPE
+        SYNTAX      MaAdvConfigEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Advertisement parameters for one advertisement
+                interface."
+        INDEX   { maInterfaceAddress }
+        ::= { maAdvConfigTable 1 }
+
+    MaAdvConfigEntry    ::= SEQUENCE {
+          maInterfaceAddress IpAddress,
+          maAdvMaxRegLifetime Integer32,
+          maAdvPrefixLengthInclusion TruthValue,
+          maAdvAddress IpAddress,
+          maAdvMaxInterval Integer32,
+          maAdvMinInterval Integer32,
+          maAdvMaxAdvLifetime Integer32,
+          maAdvResponseSolicitationOnly TruthValue,
+          maAdvStatus RowStatus
+        }
+
+    maInterfaceAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "IP address for advertisement interface."
+        ::= { maAdvConfigEntry 1 }
+
+    maAdvMaxRegLifetime OBJECT-TYPE
+        SYNTAX      Integer32 (0..65535)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The longest lifetime in seconds that mobility agent
+                is willing to accept in any Registration Request."
+        ::= { maAdvConfigEntry 2 }
+
+    maAdvPrefixLengthInclusion OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "Whether the advertisement should include the Prefix-
+                Lengths Extension. If it is true, all advertisements
+                sent over this interface should include the
+                Prefix-Lengths Extension."
+        ::= { maAdvConfigEntry 3 }
+
+    maAdvAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The IP destination address to be used for
+                advertisements sent from the interface. The only
+                permissible values are the all-systems multicast
+                address (224.0.0.1) or the limited-broadcast address
+                (255.255.255.255)."
+        REFERENCE
+                "AdvertisementAddress in RFC1256."
+        ::= { maAdvConfigEntry 4 }
+
+    maAdvMaxInterval OBJECT-TYPE
+        SYNTAX      Integer32 (4..1800)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The maximum time in seconds between successive
+                transmissions of Agent Advertisements from this
+                interface."
+        REFERENCE
+                "MaxAdvertisementInterval in RFC1256."
+        ::= { maAdvConfigEntry 5 }
+
+    maAdvMinInterval OBJECT-TYPE
+        SYNTAX      Integer32 (3..1800)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The minimum time in seconds between successive
+                transmissions of Agent Advertisements from this
+                interface."
+        REFERENCE
+                "MinAdvertisementInterval in RFC1256."
+        ::= { maAdvConfigEntry 6 }
+
+    maAdvMaxAdvLifetime OBJECT-TYPE
+        SYNTAX      Integer32 (4..9000)
+        UNITS       "seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The time (in seconds) to be placed in the Lifetime
+                field of the RFC 1256-portion of the Agent
+                Advertisements sent over this interface."
+        REFERENCE
+                "AdvertisementLifetime in RFC1256."
+        ::= { maAdvConfigEntry 7 }
+
+    maAdvResponseSolicitationOnly OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The flag indicates whether the advertisement from
+                that interface should be sent only in response to an
+                Agent Solicitation message."
+        DEFVAL      { false }
+        ::= { maAdvConfigEntry 8 }
+
+    maAdvStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The row status for the agent advertisement table. If
+                this column status is 'active', the manager should not
+                change any column in the row."
+        ::= { maAdvConfigEntry 9 }
+
+   -- MA Advertisement Group Counters
+
+    maAdvertisementsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of advertisements sent by the mobility
+                agent."
+        ::= { maAdvertisement 2 }
+
+    maAdvsSentForSolicitation OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of advertisements sent by mobility agent
+                in response to mobile node solicitations."
+        ::= { maAdvertisement 3 }
+
+    maSolicitationsReceived OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of solicitations received by the
+                mobility agent."
+        ::= { maAdvertisement 4 }
+
+    -- Foreign Agent Group
+
+    -- Foreign Agent System Group
+
+    faCOATable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FaCOAEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing all of the care-of addresses
+                (COAs) supported by the foreign agent. New entries can
+                be added to the table. The order of entries in the
+                faCOATAble is also the order in which the COAs are
+                listed in the Agent Advertisement."
+           ::= { faSystem 1 }
+
+    faCOAEntry OBJECT-TYPE
+        SYNTAX      FaCOAEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Entry of COA"
+        INDEX { faSupportedCOA }
+        ::= { faCOATable 1 }
+
+    FaCOAEntry     ::=
+        SEQUENCE {
+                 faSupportedCOA IpAddress,
+                 faCOAStatus    RowStatus
+        }
+
+    faSupportedCOA OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Care-of-address supported by this foreign agent."
+        ::= { faCOAEntry 1 }
+
+    faCOAStatus  OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+                "The row status for COA entry."
+        ::= { faCOAEntry 2 }
+
+    -- Foreign Agent Advertisement Group
+    -- FA needs to implement MA Advertisement Group plus that group
+
+    faIsBusy OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Whether or not the foreign agent is too busy to
+                accept additional registrations. If true(1), the agent
+                is busy and any Agent advertisements sent from this
+                agent should have the 'B' bit set to 1."
+        ::= { faAdvertisement 1 }
+
+    faRegistrationRequired OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "Whether or not this foreign agent requires
+                registration even from those mobile nodes that have
+                acquired their own, colocated care-of address.  If
+
+                true(1), registration is required and any Agent
+                Advertisements sent from this agent should have the
+                'R' bit set to 1."
+        ::= { faAdvertisement 2 }
+
+    -- Foreign Agent Registration Group
+
+    -- Foreign Agent Visitors List
+
+    faVisitorTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF FaVisitorEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing the foreign agent's visitor list.
+                The foreign agent updates this table in response to
+                registration events from mobile nodes."
+        ::= { faRegistration 1 }
+
+    faVisitorEntry OBJECT-TYPE
+        SYNTAX      FaVisitorEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Information for one visitor."
+        INDEX   { faVisitorIPAddress }
+        ::= { faVisitorTable 1 }
+
+    FaVisitorEntry     ::= SEQUENCE {
+        faVisitorIPAddress IpAddress,
+        faVisitorHomeAddress IpAddress,
+        faVisitorHomeAgentAddress IpAddress,
+        faVisitorTimeGranted Integer32,
+        faVisitorTimeRemaining Gauge32,
+        faVisitorRegFlags RegistrationFlags,
+        faVisitorRegIDLow Integer32,
+        faVisitorRegIDHigh Integer32,
+        faVisitorRegIsAccepted TruthValue
+        }
+
+    faVisitorIPAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Source IP address of visitor's Registration Request."
+        ::= { faVisitorEntry 1 }
+
+    faVisitorHomeAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Home (IP) address of visiting mobile node."
+        ::= { faVisitorEntry 2 }
+
+    faVisitorHomeAgentAddress OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Home agent IP address for that visiting mobile node."
+        ::= { faVisitorEntry 3 }
+
+    faVisitorTimeGranted OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime in seconds granted to the mobile node
+                for this registration.  Only valid if
+                faVisitorRegIsAccepted is true(1)."
+        ::= { faVisitorEntry 4 }
+
+    faVisitorTimeRemaining OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of seconds remaining until the
+                registration is expired. It has the same initial value
+                as faVisitorTimeGranted, and is counted down by the
+                foreign agent."
+        ::= { faVisitorEntry 5 }
+
+    faVisitorRegFlags OBJECT-TYPE
+        SYNTAX      RegistrationFlags
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Registration flags sent by mobile node."
+        ::= { faVisitorEntry 6 }
+
+    faVisitorRegIDLow OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Low 32 bits of Identification used in that
+                registration by the mobile node."
+        ::= { faVisitorEntry 7 }
+
+    faVisitorRegIDHigh OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "High 32 bits of Identification used in that
+                registration by the mobile node."
+        ::= { faVisitorEntry 8 }
+
+    faVisitorRegIsAccepted OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Whether the registration has been accepted or not. If
+                it is false(2), this registration is still pending for
+                reply."
+        ::= { faVisitorEntry 9 }
+
+   -- Foreign Agent Registration Group Counters
+
+    faRegRequestsReceived OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of valid Registration Requests
+                received."
+        ::= { faRegistration 2 }
+
+    faRegRequestsRelayed OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests relayed to home
+                agent by foreign agent."
+        ::= { faRegistration 3 }
+
+    faReasonUnspecified OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- reason unspecified (Code 64)."
+        ::= { faRegistration 4 }
+
+    faAdmProhibited OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- administratively prohibited (Code
+                65)."
+        ::= { faRegistration 5 }
+
+    faInsufficientResource OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- insufficient resources (Code 66)."
+        ::= { faRegistration 6 }
+
+    faMNAuthenticationFailure OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- mobile node failed authentication
+                (Code 67)."
+        ::= { faRegistration 7 }
+
+    faRegLifetimeTooLong OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- requested lifetime too long (Code
+                69)."
+        ::= { faRegistration 8 }
+
+    faPoorlyFormedRequests OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- poorly formed request (Code 70)."
+        ::= { faRegistration 9 }
+
+    faEncapsulationUnavailable OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- requested encapsulation unavailable
+                (Code 72)."
+        ::= { faRegistration 10 }
+
+    faVJCompressionUnavailable OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- requested Van Jacobson header
+                compression unavailable (Code 73)."
+        ::= { faRegistration 11 }
+
+    faHAUnreachable OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by
+                foreign agent -- home agent unreachable (Codes
+                80-95)."
+        ::= { faRegistration 12 }
+
+    faRegRepliesRecieved OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of well-formed Registration Replies
+                received by foreign agent."
+        ::= { faRegistration 13 }
+
+    faRegRepliesRelayed OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of valid Registration Replies relayed to
+                the mobile node by foreign agent."
+        ::= { faRegistration 14 }
+
+    faHAAuthenticationFailure OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Replies denied by
+                foreign agent -- home agent failed authentication
+                (Code 68)."
+        ::= { faRegistration 15 }
+
+    faPoorlyFormedReplies OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Replies denied by
+                foreign agent -- poorly formed reply (Code 71)."
+        ::= { faRegistration 16 }
+
+    -- Home Agent Group
+
+    -- Home Agent Registration Group
+
+    -- Home agent mobility binding list
+
+    haMobilityBindingTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF HaMobilityBindingEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing the home agent's mobility binding
+                list.  The home agent updates this table in response
+                to registration events from mobile nodes."
+        ::= { haRegistration 1 }
+
+    haMobilityBindingEntry OBJECT-TYPE
+        SYNTAX      HaMobilityBindingEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "An entry on the mobility binding list."
+        INDEX   { haMobilityBindingMN, haMobilityBindingCOA }
+        ::= { haMobilityBindingTable 1 }
+
+    HaMobilityBindingEntry ::= SEQUENCE {
+         haMobilityBindingMN    IpAddress,
+         haMobilityBindingCOA   IpAddress,
+         haMobilityBindingSourceAddress    IpAddress,
+         haMobilityBindingRegFlags    RegistrationFlags,
+         haMobilityBindingRegIDLow Integer32,
+         haMobilityBindingRegIDHigh Integer32,
+         haMobilityBindingTimeGranted Integer32,
+         haMobilityBindingTimeRemaining Gauge32
+         }
+
+    haMobilityBindingMN    OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Mobile node's home (IP) address."
+        ::= { haMobilityBindingEntry 1 }
+
+    haMobilityBindingCOA   OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Mobile node's care-of-address. One mobile node can
+                have multiple bindings with different
+                care-of-addresses."
+        ::= { haMobilityBindingEntry 2 }
+
+    haMobilityBindingSourceAddress    OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "IP source address of the Registration Request as
+                received by the home agent.  Will be either a mobile
+                node's co-located care-of address or an address of the
+                foreign agent."
+        ::= { haMobilityBindingEntry 3 }
+
+    haMobilityBindingRegFlags OBJECT-TYPE
+        SYNTAX      RegistrationFlags
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Registration flags sent by mobile node."
+        ::= { haMobilityBindingEntry 4 }
+
+    haMobilityBindingRegIDLow OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Low 32 bits of Identification used in that binding by
+                the mobile node."
+        ::= { haMobilityBindingEntry 5 }
+
+    haMobilityBindingRegIDHigh OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "High 32 bits of Identification used in that binding by
+                the mobile node."
+        ::= { haMobilityBindingEntry 6 }
+
+    haMobilityBindingTimeGranted OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime in seconds granted to the mobile node
+                for this registration."
+        ::= { haMobilityBindingEntry 7 }
+
+    haMobilityBindingTimeRemaining OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of seconds remaining until the
+                registration is expired. It has the same initial value
+                as haMobilityBindingTimeGranted, and is counted down
+                by the home agent."
+        ::= { haMobilityBindingEntry 8 }
+
+   -- Home Agent Registration Group Counters
+
+   -- Home agent registration Counters per node
+
+    haCounterTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF HaCounterEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing registration statistics for all
+                mobile nodes authorized to use this home agent."
+        ::= { haRegistration 2 }
+
+    haCounterEntry  OBJECT-TYPE
+        SYNTAX      HaCounterEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Registration statistics for one mobile node."
+        INDEX   { haMobilityBindingMN }
+        ::= { haCounterTable 1 }
+
+    HaCounterEntry      ::= SEQUENCE {
+        haServiceRequestsAccepted Counter32,
+        haServiceRequestsDenied Counter32,
+        haOverallServiceTime Gauge32,
+        haRecentServiceAcceptedTime TimeStamp,
+        haRecentServiceDeniedTime TimeStamp,
+        haRecentServiceDeniedCode INTEGER
+        }
+
+    haServiceRequestsAccepted OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of service requests for the mobile node
+                accepted by the home agent (Code 0 + Code 1)."
+        ::= { haCounterEntry 2 }
+
+    haServiceRequestsDenied   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of service requests for the mobile node
+                denied by the home agent (sum of all registrations
+                denied with Code 128 through Code 159)."
+        ::= { haCounterEntry 3 }
+
+    haOverallServiceTime   OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Overall service time (in seconds) that has
+                accumulated for the mobile node since the home agent
+                last rebooted."
+        ::= { haCounterEntry 4 }
+
+    haRecentServiceAcceptedTime  OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the most recent Registration
+                Request was accepted by the home agent for this mobile
+                node."
+        ::= { haCounterEntry 5 }
+
+    haRecentServiceDeniedTime  OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the most recent Registration
+                Request was denied by the home agent for this mobile
+                node."
+        ::= { haCounterEntry 6 }
+
+    haRecentServiceDeniedCode  OBJECT-TYPE
+        SYNTAX      INTEGER {
+                            reasonUnspecified(128),
+                            admProhibited(129),
+                            insufficientResource(130),
+                            mnAuthenticationFailure(131),
+                            faAuthenticationFailure(132),
+                            idMismatch(133),
+                            poorlyFormedRequest(134),
+                            tooManyBindings(135),
+                            unknownHA(136)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The Code indicating the reason why the most recent
+                Registration Request for this mobile node was rejected
+                by the home agent."
+        ::= { haCounterEntry 7 }
+
+   -- Home agent registration Counters for all mobile nodes.
+
+    haRegistrationAccepted   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests accepted by
+                home agent (Code 0)."
+        ::= { haRegistration 3 }
+
+    haMultiBindingUnsupported OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests accepted by
+                home agent -- simultaneous mobility bindings
+                unsupported (Code 1)."
+        ::= { haRegistration 4 }
+
+    haReasonUnspecified   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- reason unspecified (Code 128)."
+        ::= { haRegistration 5 }
+
+    haAdmProhibited   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- administratively prohibited (Code 129)."
+        ::= { haRegistration 6 }
+
+    haInsufficientResource  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- insufficient resources (Code 130)."
+        ::= { haRegistration 7 }
+
+    haMNAuthenticationFailure OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- mobile node failed authentication (Code
+                131)."
+        ::= { haRegistration 8 }
+
+    haFAAuthenticationFailure OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- foreign agent failed authentication (Code
+                132)."
+        ::= { haRegistration 9 }
+
+    haIDMismatch OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- Identification mismatch (Code 133)."
+        ::= { haRegistration 10 }
+
+    haPoorlyFormedRequest OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- poorly formed request (Code 134)."
+        ::= { haRegistration 11 }
+
+    haTooManyBindings    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- too many simultaneous mobility bindings (Code
+                135)."
+        ::= { haRegistration 12 }
+
+    haUnknownHA   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests denied by home
+                agent -- unknown home agent address (Code 136)."
+        ::= { haRegistration 13 }
+
+    haGratuitiousARPsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of gratuition ARPs sent by the home
+                agent on behalf of mobile nodes."
+        ::= { haRegistration 14 }
+
+    haProxyARPsSent   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of proxy ARPs sent by the home agent on
+                behalf of mobile nodes."
+        ::= { haRegistration 15 }
+
+    haRegRequestsReceived OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests received by
+                home agent."
+        ::= { haRegistration 16 }
+
+    haDeRegRequestsReceived OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Requests received by the
+                home agent with a Lifetime of zero (requests to
+                deregister)."
+        ::= { haRegistration 17 }
+
+    haRegRepliesSent  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Replies sent by the home
+                agent."
+        ::= { haRegistration 18 }
+
+    haDeRegRepliesSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Registration Replies sent by the home
+                agent in response to requests to deregister."
+        ::= { haRegistration 19 }
+
+    mipMIBNotificationPrefix    OBJECT IDENTIFIER ::= { mipMIB 2 }
+
+    mipMIBNotifications  OBJECT IDENTIFIER ::=
+                         { mipMIBNotificationPrefix 0 }
+
+    mipAuthFailure NOTIFICATION-TYPE
+        OBJECTS   {    mipSecViolatorAddress,
+                       mipSecRecentViolationSPI,
+                       mipSecRecentViolationIDLow,
+                       mipSecRecentViolationIDHigh,
+                       mipSecRecentViolationReason
+                  }
+        STATUS    current
+        DESCRIPTION
+                "The mipAuthFailure indicates that the Mobile IP
+                entity has an authentication failure when it validates
+                the mobile Registration Request or Reply.
+                Implementation of this trap is optional."
+        ::= { mipMIBNotifications 1 }
+
+    mipMIBConformance OBJECT IDENTIFIER ::= { mipMIB 3 }
+
+    mipGroups     OBJECT IDENTIFIER ::= { mipMIBConformance 1 }
+    mipCompliances    OBJECT IDENTIFIER ::= { mipMIBConformance 2 }
+
+    -- compliance statements
+
+    mipCompliance    MODULE-COMPLIANCE
+        STATUS    current
+        DESCRIPTION
+                "The compliance statement for SNMPv2 entities which
+                implement the Mobile IP MIB."
+        MODULE
+            MANDATORY-GROUPS { mipSystemGroup }
+
+            GROUP    mipSecAssociationGroup
+            DESCRIPTION
+                "This group is mandatory for Mobile IP entities (MN,
+                FA, and HA) which support security associations.
+                Mobile Nodes and Home Agents must implement this
+                group. Foreign Agents must implement this group if
+                they maintain any security associations."
+
+            GROUP    mipSecViolationGroup
+            DESCRIPTION
+                "This group is mandatory for Mobile IP entities (MN,
+                FA, and HA) that can log security violations."
+
+            GROUP     mnSystemGroup
+            DESCRIPTION
+                "This group is mandatory for mobile node."
+
+            GROUP     mnDiscoveryGroup
+            DESCRIPTION
+                "This group is mandatory for mobile nodes which
+                implement the Agent Discovery function."
+
+            GROUP     mnRegistrationGroup
+            DESCRIPTION
+                "This group is mandatory for mobile nodes."
+
+            GROUP    maAdvertisementGroup
+            DESCRIPTION
+                "This group is mandatory for the mobility agents (HA
+                and FA) since they must implement Agent
+                Advertisement."
+
+            GROUP     faSystemGroup
+            DESCRIPTION
+                "This group is mandatory for foreign agents."
+
+            GROUP     faAdvertisementGroup
+            DESCRIPTION
+                "This group is mandatory for foreign agents."
+
+            GROUP     faRegistrationGroup
+            DESCRIPTION
+                "This group is mandatory for foreign agents."
+
+            GROUP    haRegistrationGroup
+            DESCRIPTION
+                "This group is mandatory for home agents."
+
+            GROUP    haRegNodeCountersGroup
+            DESCRIPTION
+                "This group is mandatory for home agents which log
+                registration counters for each individual mobile
+                node."
+
+            GROUP    mipSecNotificationsGroup
+            DESCRIPTION
+                "This group is mandatory for Mobile IP entities (MN,
+                FA, and HA) that can report the security violations."
+       ::= { mipCompliances 1 }
+
+    -- Units of conformance
+
+    mipSystemGroup     OBJECT-GROUP
+        OBJECTS    { mipEntities, mipEnable, mipEncapsulationSupported }
+        STATUS     current
+        DESCRIPTION
+                "A collection of objects providing the basic Mobile IP
+                entity's management information."
+        ::= { mipGroups 1 }
+
+    mipSecAssociationGroup OBJECT-GROUP
+        OBJECTS   { mipSecAlgorithmType, mipSecAlgorithmMode,
+                    mipSecKey, mipSecReplayMethod }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing the management
+                information for security associations of Mobile IP
+                entities."
+        ::= { mipGroups 2 }
+
+    mipSecViolationGroup     OBJECT-GROUP
+        OBJECTS   { mipSecTotalViolations,
+                    mipSecViolationCounter, mipSecRecentViolationSPI,
+                    mipSecRecentViolationTime,
+                    mipSecRecentViolationIDLow,
+                    mipSecRecentViolationIDHigh,
+                    mipSecRecentViolationReason }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing the management
+
+                information for security violation logging of Mobile
+                IP entities."
+        ::= { mipGroups 3 }
+
+    mnSystemGroup    OBJECT-GROUP
+        OBJECTS   { mnState, mnCurrentHA, mnHomeAddress,
+                    mnHAStatus }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing the basic
+                management information for mobile nodes."
+        ::= { mipGroups 4 }
+
+    mnDiscoveryGroup    OBJECT-GROUP
+        OBJECTS   { mnFAAddress, mnCOA, mnAdvSourceAddress,
+                    mnAdvSequence, mnAdvFlags, mnAdvMaxRegLifetime,
+                    mnAdvMaxAdvLifetime, mnAdvTimeReceived,
+                    mnSolicitationsSent, mnAdvertisementsReceived,
+                    mnAdvsDroppedInvalidExtension,
+                    mnAdvsIgnoredUnknownExtension, mnMoveFromHAToFA,
+                    mnMoveFromFAToFA, mnMoveFromFAToHA,
+                    mnGratuitousARPsSend, mnAgentRebootsDectected }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing management
+                information for the Agent Discovery function within a
+                mobile node."
+        ::= { mipGroups 5 }
+
+    mnRegistrationGroup    OBJECT-GROUP
+        OBJECTS   { mnRegAgentAddress, mnRegCOA, mnRegFlags, mnRegIDLow,
+                    mnRegIDHigh, mnRegTimeRequested, mnRegTimeRemaining,
+                    mnRegTimeSent, mnRegIsAccepted, mnCOAIsLocal,
+                    mnRegRequestsSent, mnRegRepliesRecieved,
+                    mnDeRegRequestsSent, mnDeRegRepliesRecieved,
+                    mnRepliesInvalidHomeAddress, mnRepliesUnknownHA,
+                    mnRepliesUnknownFA, mnRepliesInvalidID,
+                    mnRepliesDroppedInvalidExtension,
+                    mnRepliesIgnoredUnknownExtension,
+                    mnRepliesHAAuthenticationFailure,
+                    mnRepliesFAAuthenticationFailure,
+                    mnRegRequestsAccepted, mnRegRequestsDeniedByHA,
+                    mnRegRequestsDeniedByFA,
+                    mnRegRequestsDeniedByHADueToID,
+                    mnRegRequestsWithDirectedBroadcast }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing management
+
+                information for the registration function within a
+                mobile node."
+        ::= { mipGroups 6 }
+
+    maAdvertisementGroup    OBJECT-GROUP
+        OBJECTS   { maAdvMaxRegLifetime,
+                    maAdvPrefixLengthInclusion, maAdvAddress,
+                    maAdvMaxInterval, maAdvMinInterval,
+                    maAdvMaxAdvLifetime,
+                    maAdvResponseSolicitationOnly, maAdvStatus,
+                    maAdvertisementsSent, maAdvsSentForSolicitation,
+                    maSolicitationsReceived }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing management
+                information for the Agent Advertisement function
+                within mobility agents."
+        ::= { mipGroups 7 }
+
+    faSystemGroup       OBJECT-GROUP
+        OBJECTS   { faCOAStatus}
+        STATUS      current
+        DESCRIPTION
+                "A collection of objects providing the basic
+                management information for foreign agents."
+        ::= { mipGroups 8 }
+
+    faAdvertisementGroup OBJECT-GROUP
+        OBJECTS   { faIsBusy, faRegistrationRequired }
+        STATUS      current
+        DESCRIPTION
+                "A collection of objects providing supplemental
+                management information for the Agent Advertisement
+                function within a foreign agent."
+        ::= { mipGroups 9 }
+
+    faRegistrationGroup    OBJECT-GROUP
+        OBJECTS   {  faVisitorIPAddress, faVisitorHomeAddress,
+                     faVisitorHomeAgentAddress, faVisitorTimeGranted,
+                     faVisitorTimeRemaining, faVisitorRegFlags,
+                     faVisitorRegIDLow, faVisitorRegIDHigh,
+                     faVisitorRegIsAccepted, faRegRequestsReceived,
+                     faRegRequestsRelayed, faReasonUnspecified,
+                     faAdmProhibited, faInsufficientResource,
+                     faMNAuthenticationFailure, faRegLifetimeTooLong,
+                     faPoorlyFormedRequests,
+                     faEncapsulationUnavailable,
+                     faVJCompressionUnavailable, faHAUnreachable,
+                     faRegRepliesRecieved, faRegRepliesRelayed,
+                     faHAAuthenticationFailure, faPoorlyFormedReplies }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing management
+                information for the registration function within a
+                foreign agent."
+        ::= { mipGroups 10 }
+
+    haRegistrationGroup    OBJECT-GROUP
+        OBJECTS   { haMobilityBindingMN, haMobilityBindingCOA,
+                    haMobilityBindingSourceAddress,
+                    haMobilityBindingRegFlags,
+                    haMobilityBindingRegIDLow,
+                    haMobilityBindingRegIDHigh,
+                    haMobilityBindingTimeGranted,
+                    haMobilityBindingTimeRemaining,
+                    haRegistrationAccepted, haMultiBindingUnsupported,
+                    haReasonUnspecified, haAdmProhibited,
+                    haInsufficientResource, haMNAuthenticationFailure,
+                    haFAAuthenticationFailure, haIDMismatch,
+                    haPoorlyFormedRequest, haTooManyBindings,
+                    haUnknownHA, haGratuitiousARPsSent,
+                    haProxyARPsSent, haRegRequestsReceived,
+                    haDeRegRequestsReceived, haRegRepliesSent,
+                    haDeRegRepliesSent }
+        STATUS    current
+        DESCRIPTION
+                "A collection of objects providing management
+                information for the registration function within a
+                home agent."
+        ::= { mipGroups 11 }
+
+    haRegNodeCountersGroup  OBJECT-GROUP
+        OBJECTS   { haServiceRequestsAccepted,
+                    haServiceRequestsDenied, haOverallServiceTime,
+                    haRecentServiceAcceptedTime,
+                    haRecentServiceDeniedTime,
+                    haRecentServiceDeniedCode }
+        STATUS      current
+        DESCRIPTION
+                "A collection of objects providing management
+                information for counters related to the registration
+                function within a home agent."
+        ::= { mipGroups 12 }
+
+    mipSecNotificationsGroup NOTIFICATION-GROUP
+        NOTIFICATIONS { mipAuthFailure }
+        STATUS      current
+        DESCRIPTION
+                "The notification related to security violations."
+        ::= { mipGroups 13 }
+
+END
diff --git a/snmp_builder/mibs/MOBILEIPV6-MIB.mib b/snmp_builder/mibs/MOBILEIPV6-MIB.mib
new file mode 100644
index 0000000..b6043b0
--- /dev/null
+++ b/snmp_builder/mibs/MOBILEIPV6-MIB.mib
@@ -0,0 +1,3984 @@
+   MOBILEIPV6-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+      MODULE-IDENTITY, mib-2, Unsigned32, Integer32, Counter32,
+      Gauge32, Counter64,
+      OBJECT-TYPE, NOTIFICATION-TYPE
+                 FROM SNMPv2-SMI
+      TEXTUAL-CONVENTION,
+      TruthValue, DateAndTime, TimeStamp
+                 FROM SNMPv2-TC
+      MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                 FROM SNMPv2-CONF
+      InetAddressType, InetAddress
+                 FROM INET-ADDRESS-MIB
+      ipv6InterfaceIfIndex
+                 FROM IP-MIB
+      ;
+
+  mip6MIB MODULE-IDENTITY
+       LAST-UPDATED "200602010000Z"        --  1st February 2006
+       ORGANIZATION "IETF mip6 Working Group"
+       CONTACT-INFO
+      "                      Glenn Mansfield Keeni
+                     Postal: Cyber Solutions Inc.
+                             6-6-3, Minami Yoshinari
+                             Aoba-ku, Sendai, Japan 989-3204.
+                        Tel: +81-22-303-4012
+                        Fax: +81-22-303-4015
+                     E-mail: glenn@cysols.com
+
+                             Kenichi Nagami
+                     Postal: INTEC NetCore Inc.
+                             1-3-3, Shin-suna
+                             Koto-ku, Tokyo, 135-0075
+                             Japan
+
+                        Tel: +81-3-5665-5069
+                     E-mail: nagami@inetcore.com
+
+                             Kazuhide Koide
+                     Postal: Tohoku University
+                             2-1-1, Katahira
+                             Aoba-ku, Sendai, 980-8577
+                             Japan
+
+                        Tel: +81-22-217-5454
+                     E-mail: koide@shiratori.riec.tohoku.ac.jp
+
+                             Sri Gundavelli
+                     Postal: Cisco Systems
+                             170 W.Tasman Drive,
+                             San Jose, CA 95134
+                             USA
+
+                        Tel: +1-408-527-6109
+                     E-mail: sgundave@cisco.com
+
+          Support Group E-mail: mip6@ietf.org"
+          DESCRIPTION
+                  "The MIB module for monitoring Mobile-IPv6
+                   entities.
+
+                   Copyright (C) The Internet Society 2006.  This
+                   version of this MIB module is part of RFC 4295;
+                   see the RFC itself for full legal notices.
+                  "
+
+          REVISION    "200602010000Z"      -- 1st February 2006
+          DESCRIPTION "Initial version, published as RFC 4295."
+               ::= { mib-2 133 }
+
+    -- The major groups
+
+    mip6Notifications        OBJECT IDENTIFIER ::= { mip6MIB 0 }
+    mip6Objects              OBJECT IDENTIFIER ::= { mip6MIB 1 }
+    mip6Conformance          OBJECT IDENTIFIER ::= { mip6MIB 2 }
+    mip6Core                 OBJECT IDENTIFIER ::= { mip6Objects 1 }
+    mip6Mn                   OBJECT IDENTIFIER ::= { mip6Objects 2 }
+    mip6Cn                   OBJECT IDENTIFIER ::= { mip6Objects 3 }
+    mip6Ha                   OBJECT IDENTIFIER ::= { mip6Objects 4 }
+
+    -- The sub groups
+
+    mip6System               OBJECT IDENTIFIER ::= { mip6Core 1 }
+    mip6Bindings             OBJECT IDENTIFIER ::= { mip6Core 2 }
+    mip6Stats                OBJECT IDENTIFIER ::= { mip6Core 3 }
+
+    mip6MnSystem             OBJECT IDENTIFIER ::= { mip6Mn 1 }
+    mip6MnConf               OBJECT IDENTIFIER ::= { mip6Mn 2 }
+    mip6MnRegistration       OBJECT IDENTIFIER ::= { mip6Mn 3 }
+
+    mip6CnSystem             OBJECT IDENTIFIER ::= { mip6Cn 1 }
+
+    mip6CnStats              OBJECT IDENTIFIER ::= { mip6Cn 2 }
+
+    mip6HaAdvertisement      OBJECT IDENTIFIER ::= { mip6Ha 1 }
+    mip6HaStats              OBJECT IDENTIFIER ::= { mip6Ha 2 }
+
+   -- Textual Conventions
+    Mip6BURequestRejectionCode ::= TEXTUAL-CONVENTION
+           STATUS        current
+           DESCRIPTION
+                   "The value of the status field in the Binding
+                    Acknowledgment message when the Binding Update
+                    was rejected.
+                   "
+           REFERENCE
+                   "RFC 3775 : Section 6.1.8"
+           SYNTAX  INTEGER {
+                   reasonUnspecified               (1),  --(Code 128)
+                   admProhibited                   (2),  --(Code 129)
+                   insufficientResource            (3),  --(Code 130)
+                   homeRegistrationNotSupported    (4),  --(Code 131)
+                   notHomeSubnet                   (5),  --(Code 132)
+                   notHomeAgentForThisMobileNode   (6),  --(Code 133)
+                   duplicateAddressDetectionFailed (7),  --(Code 134)
+                   sequenceNumberOutOfWindow       (8),  --(Code 135)
+                   expiredHomeNonceIndex           (9),  --(Code 136)
+                   expiredCareofNonceIndex         (10), --(Code 137)
+                   expiredNonces                   (11), --(Code 138)
+                   registrationTypeChangeDisallowed(12)  --(Code 139)
+                  }
+
+    mip6Capabilities OBJECT-TYPE
+        SYNTAX      BITS {
+                         mobileNode         (0),
+                         homeAgent          (1),
+                         correspondentNode  (2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object indicates the Mobile IPv6 functions that
+                 are supported by this managed entity.  Multiple
+                 Mobile IPv6 functions may be supported by a single
+                 entity.
+                "
+        REFERENCE
+                "RFC 3775 : Section 3.2, 4.1"
+        ::= { mip6System 1 }
+
+    mip6Status OBJECT-TYPE
+        SYNTAX      INTEGER { enabled(1), disabled(2) }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "This object indicates whether the Mobile IPv6
+                 function is enabled for the managed entity.  If it
+                 is enabled, the agent discovery and registration
+                 functions will be operational.
+                 Changing the status from enabled(1) to disabled(2)
+                 will terminate the agent discovery and registration
+                 functions.  On the other hand, changing the status
+                 from disabled(2) to enabled(1) will start the agent
+                 discovery and registration functions.
+
+                 The value of this object SHOULD remain unchanged
+                 across reboots of the managed entity.
+                "
+        ::= { mip6System 2 }
+
+    -- mip6BindingCache
+
+     mip6BindingCacheTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6BindingCacheEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "This table models the Binding Cache on the
+                 managed entity.  The cache is maintained by home
+                 agents and correspondent nodes.  It contains
+                 both correspondent registration entries and home
+                 registration entries.
+
+                 Entries in this table are not required to survive
+                 a reboot of the managed entity.
+                "
+        REFERENCE
+                "RFC 3775 : Section 4.5, 9.1, 10.1"
+        ::= { mip6Bindings 1 }
+
+     mip6BindingCacheEntry OBJECT-TYPE
+        SYNTAX      Mip6BindingCacheEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "This entry represents a conceptual row in the
+                 binding cache table.  It represents a single Binding
+                 Update.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6BindingHomeAddress
+                 exceeds 113, then OIDs of column
+                 instances in this row will have more than 128
+                 sub-identifiers and cannot be accessed using
+                 SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX  { mip6BindingHomeAddressType, mip6BindingHomeAddress }
+        ::= { mip6BindingCacheTable 1 }
+
+     Mip6BindingCacheEntry ::=
+        SEQUENCE {
+         mip6BindingHomeAddressType   InetAddressType,
+         mip6BindingHomeAddress       InetAddress,
+         mip6BindingCOAType           InetAddressType,
+         mip6BindingCOA               InetAddress,
+         mip6BindingTimeRegistered    DateAndTime,
+         mip6BindingTimeGranted       Gauge32,
+         mip6BindingTimeRemaining     Gauge32,
+         mip6BindingHomeRegn          TruthValue,
+         mip6BindingMaxSeq            Unsigned32,
+         mip6BindingUsageTS           DateAndTime,
+         mip6BindingUsageCount        Gauge32,
+         mip6BindingAdminStatus       INTEGER
+        }
+
+    mip6BindingHomeAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The InetAddressType of the mip6BindingHomeAddress
+                 that follows.
+                "
+        ::= { mip6BindingCacheEntry 1 }
+
+    mip6BindingHomeAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The home address of the mobile node corresponding
+                 to the Binding Cache entry.  This field is used as
+                 the key for searching the mobile node's current
+                 care-of address in the Binding Cache.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding
+                 mip6BindingHomeAddressType object.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 2 }
+
+    mip6BindingCOAType   OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The InetAddressType of the mip6BindingCOA that
+                 follows.
+                "
+        ::= { mip6BindingCacheEntry 3 }
+
+    mip6BindingCOA   OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The care-of address of the mobile node indicated by
+                 the home address field (mip6BindingHomeAddress) in
+                 this Binding Cache entry.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding mip6BindingCOAType
+                 object.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 4 }
+
+     mip6BindingTimeRegistered OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The timestamp when this Binding Cache entry was
+                 created.
+                "
+        ::= { mip6BindingCacheEntry 5 }
+
+     mip6BindingTimeGranted OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime in seconds granted to the mobile node
+                 for this registration.
+                "
+        ::= { mip6BindingCacheEntry 6 }
+
+    mip6BindingTimeRemaining OBJECT-TYPE
+        SYNTAX      Gauge32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime in seconds remaining for this
+                 registration.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 7 }
+
+     mip6BindingHomeRegn OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object indicates whether or not this Binding
+                 Cache entry is a home registration entry (applicable
+                 only on nodes that support home agent
+                 functionality).
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 8 }
+
+     mip6BindingMaxSeq OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..65536)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The maximum value of the Sequence Number field
+                 received in previous Binding Updates for this home
+                 address (mip6BindingHomeAddress).
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1, 9.5.1"
+        ::= { mip6BindingCacheEntry 9 }
+
+     mip6BindingUsageTS OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The timestamp when this entry was last looked up.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 10 }
+
+     mip6BindingUsageCount OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of times this entry was looked up.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 11 }
+
+     mip6BindingAdminStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        active     (1),
+                        inactive   (2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "This is an administrative object used to control
+                 the status of a binding cache entry.  By default
+                 the value will be 'active'(1).
+                 A value of 'inactive'(2) will indicate that the
+                 validity of the entry is suspended.  It does not
+                 exist in the binding cache for all practical
+                 purposes.
+                 The state can be changed from 'active' to
+                 'inactive' by operator intervention.
+                 Causing the state to change to 'inactive' results
+                 in the entry being deleted from the cache.
+                 Attempts to change the status from 'inactive'
+                 to 'active' will be rejected.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.1"
+        ::= { mip6BindingCacheEntry 12 }
+
+    -- mip6BindingHistory
+    -- Once the lifetime expires an entry will be removed from the
+    -- Binding Cache.
+    -- For monitoring purposes it will be useful to have access to
+    -- the history of the Binding Cache.  BindingHistoryTable serves
+    -- this purpose.  It records the history of the Bindings.
+    -- The size of the table will be left to implementors.
+
+     mip6BindingHistoryTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6BindingHistoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing a record of the bindings.
+                "
+        ::= { mip6Bindings 2 }
+
+     mip6BindingHistoryEntry OBJECT-TYPE
+        SYNTAX      Mip6BindingHistoryEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The record of a binding.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6BindingHstHomeAddress
+                 exceeds 112, then OIDs of column
+                 instances in this row will have more than 128
+                 sub-identifiers and cannot be accessed using
+                 SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX   { mip6BindingHstHomeAddressType,
+                  mip6BindingHstHomeAddress ,
+                  mip6BindingHstIndex}
+        ::= { mip6BindingHistoryTable 1 }
+
+     Mip6BindingHistoryEntry ::=
+        SEQUENCE {
+         mip6BindingHstHomeAddressType   InetAddressType,
+         mip6BindingHstHomeAddress       InetAddress,
+         mip6BindingHstIndex             Unsigned32,
+         mip6BindingHstCOAType           InetAddressType,
+         mip6BindingHstCOA               InetAddress,
+         mip6BindingHstTimeRegistered    DateAndTime,
+         mip6BindingHstTimeExpired       DateAndTime,
+         mip6BindingHstHomeRegn          TruthValue,
+         mip6BindingHstUsageTS           DateAndTime,
+         mip6BindingHstUsageCount        Gauge32
+        }
+
+    mip6BindingHstHomeAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The InetAddressType of the
+                 mip6BindingHstHomeAddress that follows.
+                "
+        ::= { mip6BindingHistoryEntry 1 }
+
+    mip6BindingHstHomeAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Mobile node's home address.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding
+                 mip6BindingHstHomeAddressType object.
+                "
+        ::= { mip6BindingHistoryEntry 2 }
+
+    mip6BindingHstIndex OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..4294967295)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The index to uniquely identify this record along
+                 with the mobile node's HomeAddress type and
+                 HomeAddress.  It should be monotonically increasing.
+                 It may wrap after reaching its max value."
+        ::= { mip6BindingHistoryEntry 3 }
+
+    mip6BindingHstCOAType   OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The InetAddressType of the mip6BindingHstCOA that
+                 follows.
+                "
+        ::= { mip6BindingHistoryEntry 4 }
+
+    mip6BindingHstCOA   OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Mobile node's care-of address.  One mobile node can
+                 have multiple bindings with different
+                 care-of addresses.
+                 The type of the address represented by this object
+                 is specified by the corresponding
+                 mip6BindingHstCOAType object.
+                "
+        ::= { mip6BindingHistoryEntry 5 }
+
+     mip6BindingHstTimeRegistered OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The timestamp when this Binding Cache entry was
+                 created.
+                "
+        ::= { mip6BindingHistoryEntry 6 }
+
+     mip6BindingHstTimeExpired OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The timestamp when this Binding Cache entry expired.
+                "
+        ::= { mip6BindingHistoryEntry 7 }
+
+     mip6BindingHstHomeRegn OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object indicates whether or not this Binding
+                 Cache entry is a home registration entry (applicable
+                 only on nodes that support home agent
+                 functionality).
+                "
+        ::= { mip6BindingHistoryEntry 8 }
+
+     mip6BindingHstUsageTS OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The timestamp when this entry was last looked up.
+                "
+        ::= { mip6BindingHistoryEntry 9 }
+
+     mip6BindingHstUsageCount OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of times this entry was looked up.
+                "
+        ::= { mip6BindingHistoryEntry 10 }
+
+    -- mip6TrafficCounters
+
+    -- MIPv6 Traffic will be characterized by
+    -- IPv6 datagrams which satisfy at least one of the following
+    -- conditions
+    --   - the datagrams are tunneled to the mobile node by the HA
+    --   - the datagrams are reverse tunneled by the MN to the HA
+    --   - the datagrams have the Routing header type 2 set.
+    --   - the datagrams have the Home Address option set in the
+    --     Destination Option extension header
+    --   - the datagrams have the mobility header
+
+     mip6TotalTraffic OBJECT IDENTIFIER ::= { mip6Stats 1 }
+    --  REFERENCE
+    --             "RFC 3775 : Section 4.1, 6.3, 6.4"
+
+     mip6InOctets  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The total number of octets in the MIPv6 datagrams
+                received by the MIPv6 entity.  This will include
+                datagrams with the Mobility Header, the Home Address
+                option in the Destination Option extension header
+                (Next Header value = 60), or the type 2 Routing
+                Header.  It will also include the IPv6 datagrams that
+                are reverse tunneled to a home agent from a mobile
+                node's home address.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6CounterDiscontinuityTime.
+               "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 1 }
+
+     mip6HCInOctets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The total number of octets in the MIPv6 datagrams
+                received by the MIPv6 entity.  This will include
+                datagrams with the Mobility Header, the Home Address
+                option in the Destination Option extension header
+                (Next Header value = 60), or the type 2 Routing
+                Header.  It will also include the IPv6 datagrams that
+                are reverse tunneled to a home agent from a mobile
+                node's home address.
+                This object is a 64-bit version of mip6InOctets.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6CounterDiscontinuityTime.
+               "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 2 }
+
+     mip6InPkts    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams received by the MIPv6
+                 entity.  This will include datagrams with the
+                 Mobility Header, the Home Address option in the
+                 Destination Option extension header (Next Header
+                 value = 60), or the type 2 Routing Header.
+                 It will also include the IPv6 datagrams that are
+                 reverse tunneled to a home agent from a mobile
+                 node's home address.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 3 }
+
+     mip6HCInPkts    OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams received by the MIPv6
+                 entity.  This will include datagrams with the
+                 Mobility Header, the Home Address option in the
+                 Destination Option extension header (Next Header
+                 value = 60), or the type 2 Routing Header.  It will
+                 also include the IPv6 datagrams that are reverse
+                 tunneled to a home agent from a mobile node's home
+                 address.
+                 This object is a 64-bit version of mip6InPkts.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 4 }
+
+     mip6OutOctets  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The total number of octets in the MIPv6 datagrams
+                sent by the MIPv6 entity.  This will include
+                datagrams with the Mobility Header, the Home Address
+                option in the Destination Option extension header
+                (Next Header value = 60), or the type 2 Routing
+                Header.  It will also include the IPv6 datagrams that
+                are reverse tunneled to a home agent from a mobile
+                node's home address.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6CounterDiscontinuityTime.
+               "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 5 }
+
+     mip6HCOutOctets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The total number of octets in the MIPv6 datagrams
+                sent by the MIPv6 entity.  This will include
+                datagrams with the Mobility Header, the Home Address
+                option in the Destination Option extension header
+                (Next Header value = 60), or the type 2 Routing
+                Header.  It will also include the IPv6 datagrams that
+                are reverse tunneled to a home agent from a mobile
+                node's home address.
+                This object is a 64-bit version of mip6OutOctets.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6CounterDiscontinuityTime.
+               "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 6 }
+
+     mip6OutPkts    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams sent by the MIPv6
+                 entity.  This will include the datagrams with
+                 Mobility Header, the Home Address option in the
+                 Destination Option extension header (Next Header
+                 value = 60), or the type 2 Routing Header.  It will
+                 also include the IPv6 datagrams that are reverse
+                 tunneled to a home agent from a mobile node's home
+                 address.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 7 }
+
+     mip6HCOutPkts    OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams sent by the MIPv6
+                 entity.  This will include datagrams with the
+                 Mobility Header, the Home Address option in the
+                 Destination Option extension header (Next Header
+                 value = 60), or the type 2 Routing Header.  It will
+                 also include the IPv6 datagrams that are reverse
+                 tunneled to a home agent from a mobile node's home
+                 address.
+                 This object is a 64-bit version of mip6OutPkts.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6TotalTraffic 8 }
+
+     mip6CounterDiscontinuityTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The value of sysUpTime on the most recent occasion
+                 at which any one or more of this MIPv6 entities
+                 global counters, viz., counters with OID prefix
+                 'mip6TotalTraffic' or 'mip6CnGlobalStats' or
+                 'mip6HaGlobalStats' suffered a discontinuity.
+                 If no such discontinuities have occurred since the
+                 last re-initialization of the local management
+                 subsystem, then this object will have a zero value.
+                "
+        ::= { mip6TotalTraffic 9 }
+
+    -- mip6NodeTrafficCounters
+
+     mip6NodeTrafficTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6NodeTrafficEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing MIPv6 traffic counters per mobile
+                 node.
+                "
+        ::= { mip6Stats 2 }
+
+     mip6NodeTrafficEntry OBJECT-TYPE
+        SYNTAX      Mip6NodeTrafficEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The MIPv6 traffic statistics for a mobile node.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6BindingHomeAddress
+                 exceeds 113, then OIDs of column
+                 instances in this row will have more than 128
+                 sub-identifiers and cannot be accessed using
+                 SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX  { mip6BindingHomeAddressType, mip6BindingHomeAddress }
+        ::= { mip6NodeTrafficTable 1 }
+
+     Mip6NodeTrafficEntry ::=
+        SEQUENCE {
+              mip6NodeInOctets             Counter32,
+              mip6HCNodeInOctets           Counter64,
+              mip6NodeInPkts               Counter32,
+              mip6HCNodeInPkts             Counter64,
+              mip6NodeOutOctets            Counter32,
+              mip6HCNodeOutOctets          Counter64,
+              mip6NodeOutPkts              Counter32,
+              mip6HCNodeOutPkts            Counter64,
+              mip6NodeCtrDiscontinuityTime TimeStamp
+        }
+
+     mip6NodeInOctets  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of octets in the MIPv6 datagrams
+                 received from the mobile node by the MIPv6 entity.
+                 This will include datagrams with the Mobility
+                 Header or the Home Address option in the Destination
+                 Option extension header (Next Header value = 60).
+                 It will also include the IPv6 datagrams that are
+                 reverse tunneled to a home agent from the mobile
+                 node's home address.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6NodeCtrDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 1 }
+
+     mip6HCNodeInOctets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of octets in the MIPv6 datagrams
+                 received from the mobile node by the MIPv6 entity.
+                 This will include datagrams with the Mobility
+                 Header or the Home Address option in the Destination
+                 Option extension header (Next Header value = 60).
+                 It will also include the IPv6 datagrams that are
+                 reverse tunneled to a home agent from the mobile
+                 node's home address.
+                 This object is a 64-bit version of mip6NodeInOctets.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6NodeCtrDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 2 }
+
+     mip6NodeInPkts    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams received from the
+                 mobile node by the MIPv6 entity.  This will include
+                 the datagrams with the Mobility Header or
+                 the Home Address option in the Destination
+                 Option extension header (Next Header value = 60).
+                 It will also include the IPv6 datagrams that are
+                 reverse tunneled to a home agent from the mobile
+                 node's home address.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6NodeCtrDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 3 }
+
+     mip6HCNodeInPkts    OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams received from the
+                 mobile node by the MIPv6 entity.  This will include
+                 datagrams with the Mobility Header or the Home
+                 Address option in the Destination Option extension
+                 header (Next Header value = 60).  It will also
+                 include the IPv6 datagrams that are reverse tunneled
+                 to a home agent from the mobile node's home address.
+                 This object is a 64-bit version of mip6NodeInPkts.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6NodeCtrDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 4 }
+
+     mip6NodeOutOctets  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of octets in the MIPv6 datagrams
+                 sent to the mobile node by the MIPv6 entity.  This
+                 will include datagrams with the Mobility Header
+                 or the type 2 Routing Header.  It will also include
+                 the IPv6 datagrams that are tunneled by a home agent
+                 to the mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6NodeCtrDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 5 }
+
+     mip6HCNodeOutOctets  OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The total number of octets in the MIPv6 datagrams
+                sent to the mobile node by the MIPv6 entity.  This
+                will include datagrams with the Mobility Header
+                or the type 2 Routing Header.  It will also include
+                the IPv6 datagrams that are tunneled by a home agent
+                to the mobile node.
+                This object is a 64-bit version of mip6NodeOutOctets.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6NodeCtrDiscontinuityTime.
+               "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 6 }
+
+     mip6NodeOutPkts    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of MIPv6 datagrams sent to the mobile
+                 node by the MIPv6 entity.  This will include
+                 datagrams with the Mobility Header or the type 2
+                 Routing Header.  It will also include the IPv6
+                 datagrams that are tunneled by a home agent to the
+                 mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6NodeCtrDiscontinuityTime.
+                "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 7 }
+
+     mip6HCNodeOutPkts    OBJECT-TYPE
+        SYNTAX      Counter64
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The number of MIPv6 datagrams sent to the mobile
+                node by the MIPv6 entity.  This will include
+                datagrams with the Mobility Header or the type 2
+                Routing Header.  It will also include the IPv6
+                datagrams that are tunneled by a home agent to the
+                mobile node.
+                This object is a 64-bit version of mip6NodeOutOctets.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6NodeCtrDiscontinuityTime.
+               "
+        REFERENCE
+                   "RFC 3775 : Section 6.1, 6.3, 6.4, 10.4.5"
+        ::= { mip6NodeTrafficEntry 8 }
+
+     mip6NodeCtrDiscontinuityTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The value of sysUpTime on the most recent occasion
+                 at which any one or more of the counters in this row
+                 suffered a discontinuity.  The relevant counters are
+                 the specific instances of any Counter32 or Counter64
+                 objects in this row.
+                 If no such discontinuities have occurred since the
+                 last re-initialization of the local management
+                 subsystem, then this object contains a zero value.
+                "
+        ::= { mip6NodeTrafficEntry 9 }
+
+    -- mip6MnSystem Group
+
+    mip6MnHomeAddressTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6MnHomeAddressEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing registration status for all the
+                 home addresses pertaining to the mobile node.
+                "
+        ::= { mip6MnSystem 1 }
+
+     mip6MnHomeAddressEntry OBJECT-TYPE
+        SYNTAX      Mip6MnHomeAddressEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The registration status for a home address.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6MnHomeAddress
+                 exceeds 113, then OIDs of column instances in
+                 this row will have more than 128 sub-identifiers and
+                 cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX   { mip6MnHomeAddressType, mip6MnHomeAddress }
+        ::= { mip6MnHomeAddressTable 1 }
+
+     Mip6MnHomeAddressEntry ::=
+        SEQUENCE {
+              mip6MnHomeAddressType            InetAddressType,
+              mip6MnHomeAddress                InetAddress,
+              mip6MnHomeAddressState           INTEGER
+        }
+
+    mip6MnHomeAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The InetAddressType of the mip6MnHomeAddress that
+                 follows.
+                "
+        ::= { mip6MnHomeAddressEntry 1 }
+
+    mip6MnHomeAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+               "A unicast routable address assigned to the mobile
+                node.  This is used as the 'permanent address' of the
+                mobile node in the sense that it remains unchanged
+                regardless of the mobile node's current point of
+                attachment.  If mobile node doesn't have a home
+                address assigned yet, then this object will take the
+                default 'unspecified' value ::0.
+
+                The type of the address represented by this object
+                is specified by the corresponding
+                mip6MnHomeAddressType object.
+               "
+        REFERENCE
+                "RFC 3775 : Section 3.2"
+        ::= { mip6MnHomeAddressEntry 2 }
+
+    mip6MnHomeAddressState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                            unknown(1),
+                            home(2),
+                            registered(3),
+                            pending(4),
+                            isolated(5)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This object indicates the state of the mobile node:
+                 unknown     -- The state of the mobile node
+                                cannot be determined.
+                 home        -- mobile node is on the home network.
+                 registered  -- mobile node is on a foreign network
+                                and is registered with the home
+                                agent.
+                 pending     -- mobile node has sent registration
+                                request to the home agent and is
+                                waiting for the reply.
+                 isolated    -- mobile node is isolated from network,
+                                i.e., it is not in its home network,
+                                it is not registered, and no
+                                registration ack is pending.
+                "
+        ::= { mip6MnHomeAddressEntry 3 }
+
+    -- Mobile Node Discovery and Advertisement Group Counters
+
+    mip6MnDiscoveryRequests OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of ICMP Dynamic Home Agent Address
+                 Discovery Requests sent by the mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.5, 11.4.1"
+           ::= { mip6MnConf 1 }
+
+    mip6MnDiscoveryReplies OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of ICMP Dynamic Home Agent Address
+                 Discovery Replies received by the mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.5, 11.4.1"
+           ::= { mip6MnConf 2 }
+
+    mip6MnDiscoveryTimeouts OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of ICMP Dynamic Home Agent Address
+                 Discovery Requests that timed out.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.5, 11.4.1, 12"
+           ::= { mip6MnConf 3 }
+
+    mip6MnPrefixSolicitationsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of ICMP Mobile Prefix Solicitations
+                 sent by the mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.5, 11.4.2"
+           ::= { mip6MnConf 4 }
+
+    mip6MnPrefixAdvsRecd OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of ICMP Mobile Prefix Advertisements
+                 received by the mobile node.  This will include the
+                 ICMP Mobile Prefix Advertisements that failed the
+                 validity checks.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.6, 11.4.3"
+        ::= { mip6MnConf 5 }
+
+    mip6MnPrefixAdvsIgnored OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Mobile Prefix Advertisements
+                 discarded by the validity check.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.6, 11.4.3"
+        ::= { mip6MnConf 6 }
+
+    mip6MnMovedToFN OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times the mobile node has detected
+                 movement to a foreign network from another
+                 foreign network or from the home network, has
+                 reconstructed its care-of address and has initiated
+                 the care-of address registration process.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.5.1"
+        ::= { mip6MnConf 7 }
+
+    mip6MnMovedToHN OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times the mobile node has detected
+                 movement from a foreign network to its home
+                 network.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.5.4"
+        ::= { mip6MnConf 8 }
+
+    -- Mobile Node Registration Group
+
+    -- Registration table of mobile node
+
+    mip6MnBLTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6MnBLEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+               "This table corresponds to the Binding Update List
+                (BL) that is maintained by the mobile node.  The list
+                holds an item for every binding that the mobile node
+                has established or is trying to establish.  Both
+                correspondent and home registrations are included in
+                this table.  Entries from the table are deleted as
+                the lifetime of the binding expires.
+               "
+        REFERENCE
+                "RFC 3775 : Section 4.5, 11.1"
+        ::= { mip6MnRegistration 1 }
+
+    mip6MnBLEntry OBJECT-TYPE
+        SYNTAX      Mip6MnBLEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Information about a Binding Update sent by the
+                 mobile node either to its home agent or to one of
+                 its correspondent nodes.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6MnHomeAddress and
+                 mip6MnBLNodeAddress exceeds 111, then OIDs of column
+                 instances in this row will have more than 128
+                 sub-identifiers and cannot be accessed using
+                 SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX { mip6MnHomeAddressType,
+                mip6MnHomeAddress,
+                mip6MnBLNodeAddressType,
+                mip6MnBLNodeAddress
+              }
+        ::= { mip6MnBLTable 1 }
+
+    Mip6MnBLEntry ::= SEQUENCE {
+        mip6MnBLNodeAddressType   InetAddressType,
+        mip6MnBLNodeAddress       InetAddress,
+        mip6MnBLCOAType           InetAddressType,
+        mip6MnBLCOA               InetAddress,
+        mip6MnBLLifeTimeRequested Unsigned32,
+        mip6MnBLLifeTimeGranted   Unsigned32,
+        mip6MnBLMaxSeq            Unsigned32,
+        mip6MnBLTimeSent          DateAndTime,
+        mip6MnBLAccepted          TruthValue,
+        mip6MnBLAcceptedTime      DateAndTime,
+        mip6MnBLRetransmissions   Gauge32,
+        mip6MnBLDontSendBUFlag    TruthValue
+        }
+
+    mip6MnBLNodeAddressType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                 "The InetAddressType of the mip6MnBLNodeAddress
+                  that follows.
+                 "
+        ::= { mip6MnBLEntry 1 }
+
+    mip6MnBLNodeAddress OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The address of the agent as used in the destination
+                 address of the Binding Update.  The agent
+                 may be a home agent or a correspondent node.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding
+                 mip6MnBLNodeAddressType object.
+                 "
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 2 }
+
+    mip6MnBLCOAType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The InetAddressType of the mip6MnBLCOA that follows.
+                "
+        ::= { mip6MnBLEntry 3 }
+
+    mip6MnBLCOA OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Care-of address that the mobile node intends to
+                 register in the Binding Update request.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding mip6MnBLCOAType
+                 object.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 4 }
+
+    mip6MnBLLifeTimeRequested OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime requested by the mobile node (in
+                 seconds) in the Binding Update.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 5 }
+
+    mip6MnBLLifeTimeGranted OBJECT-TYPE
+        SYNTAX      Unsigned32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime granted to the mobile node for this
+                 binding.  This field will be inaccessible if the
+                 Binding Update request has not been accepted.
+                 The lifetime remaining (lR) can be calculated using
+                 the current time (cT), mip6MnBLAcceptedTime (aT) and
+                 mip6MnBLLifeTimeGranted (lG) as follows:
+                         lR  = lG - (cT - aT).
+                 When lR is zero, this entry will be deleted from the
+                 Binding Update List and consequently from this
+                 table.
+                "
+        ::= { mip6MnBLEntry 6 }
+
+    mip6MnBLMaxSeq OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..65536)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The maximum value of the Sequence Number field sent
+                 in previous Binding Updates to this destination.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 7 }
+
+    mip6MnBLTimeSent OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time when the last (re-)transmission occurred."
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 8 }
+
+    mip6MnBLAccepted OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "true(1) if the mobile node has received a
+                 binding acknowledgment indicating that service has
+                 been accepted (status code 0 or 1); false(2)
+                 otherwise.  false(2) implies that the registration
+                 is still pending.
+                "
+        ::= { mip6MnBLEntry 9 }
+
+    mip6MnBLAcceptedTime OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the mobile node receives a binding
+                 acknowledgment indicating that Binding Update has
+                 been accepted (status code 0 or 1);
+                 This object will be inaccessible if the Binding
+                 Update request is still pending.
+                "
+        ::= { mip6MnBLEntry 10 }
+
+    mip6MnBLRetransmissions  OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The number of Binding Update retransmissions.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 11 }
+
+    mip6MnBLDontSendBUFlag OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "true(1) indicates that future binding updates
+                 will not be sent to mip6MnBLNodeAddress.
+                 false(2) implies that binding updates will be
+                 sent to mip6MnBLNodeAddress.
+                 The mobile node sets this flag in the when it
+                 receives an ICMP Parameter Problem, Code 1,
+                 error message in response to a return
+                 routability message or Binding Update sent to
+                 mip6MnBLNodeAddress.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.1"
+        ::= { mip6MnBLEntry 12 }
+
+    -- Mobile Node Registration Group Counters
+
+    mip6MnRegnCounters OBJECT IDENTIFIER ::= { mip6MnRegistration 2 }
+
+    mip6MnMobilityMessagesSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of mobility messages, i.e., IPv6
+                 datagrams with Mobility Header, sent by the mobile
+                 node.  There are 3 types of mobility messages, viz.,
+                 Home Test Init, Care-of Test Init, and Binding
+                 Updates, that are sent by mobile nodes.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 4.2, 6.1"
+        ::= {  mip6MnRegnCounters 1 }
+
+    mip6MnMobilityMessagesRecd OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of mobility messages, i.e., IPv6
+                 datagrams with Mobility Header, received by the
+                 mobile node.  There are 5 types of mobility
+                 messages, viz., Home Test, Care-of Test, Binding
+                 Acknowledgment, Binding Refresh Request, and Binding
+                 Error, that are sent to mobile nodes.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 4.2, 6.1"
+        ::= {  mip6MnRegnCounters 2 }
+
+    mip6MnBUsToHA  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates sent to the mobile
+                 node's home agent(s).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.7.1"
+        ::= {  mip6MnRegnCounters 3 }
+
+    mip6MnBUAcksFromHA  OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of valid binding acknowledgments
+                 received from the mobile node's home agent(s).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.7.3"
+        ::= {  mip6MnRegnCounters 4 }
+
+    mip6MnBUsToCN OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates sent to
+                 correspondent nodes by the mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.7.2"
+        ::= {  mip6MnRegnCounters 5 }
+
+    mip6MnBUAcksFromCN OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of valid Binding Update acks
+                 received from all the correspondent nodes.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.7.3"
+        ::= {  mip6MnRegnCounters 6 }
+
+    mip6MnBindingErrorsFromCN OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Error messages received
+                 by mobile node from CN.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        ::= {  mip6MnRegnCounters 7 }
+
+    mip6MnICMPErrorsRecd OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of ICMP Error messages of type ICMP
+                 Parameter Problem, Code 1 or Code 2, received by
+                 the mobile node from a correspondent node in
+                 response to a return routability procedure, a
+                 Binding Update, or a packet with the Home Address
+                 option.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.3.5"
+        ::= {  mip6MnRegnCounters 8 }
+
+    mip6MnBRRequestsRecd OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of Binding Refresh requests
+                 received by the mobile node from correspondent
+                 nodes.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 11.7.4"
+        ::= {  mip6MnRegnCounters 9 }
+
+    -- Registration Group counters used for Correspondent Node
+    mip6CnGlobalStats OBJECT IDENTIFIER ::= { mip6CnStats 1 }
+
+    mip6CnHomeTestInitsRecd     OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Home Test Init messages received.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.4.1"
+        ::= { mip6CnGlobalStats 1 }
+
+    mip6CnHomeTestsSent      OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Home Test messages sent.  If a Home
+                 Test Init message is found to be valid, a Home Test
+                 message will be generated and sent.  Otherwise the
+                 Home Test message is silently discarded.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.4.3"
+        ::= { mip6CnGlobalStats 2 }
+
+    mip6CnCareOfTestInitsRecd     OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Care-of Test Init messages received.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.4.2"
+        ::= { mip6CnGlobalStats 3 }
+
+    mip6CnCareOfTestsSent            OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Care-of Test messages sent.  If a
+                 Care-of Test Init message is found to be valid, a
+                 Care-of Test message will be generated and sent.
+                 Otherwise the Care-of Test message is silently
+                 discarded.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.4.4"
+        ::= { mip6CnGlobalStats 4 }
+
+    mip6CnBUsRecd     OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates received by the
+                 correspondent node from mobile nodes.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.5.1"
+        ::= { mip6CnGlobalStats 5 }
+
+    mip6CnBUAcksSent    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of acknowledgments sent by the
+                 correspondent node for the Binding Updates received.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.5.4"
+        ::= { mip6CnGlobalStats 6 }
+
+    mip6CnBRsSent     OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Refresh Request messages
+                 sent by the correspondent node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.5.5"
+        ::= { mip6CnGlobalStats 7 }
+
+     mip6CnBindingErrors OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Error messages sent by the
+                 correspondent node to the mobile node.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.3.3"
+        ::= { mip6CnGlobalStats 8 }
+
+    mip6CnBUsAccepted   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates accepted by the
+                 correspondent node.  If a Binding Acknowledgment
+                 message is sent for the Binding Update request,
+                 the Status code field in the message will have
+                 a value less than 128.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.5.1, 9.5.4"
+        ::= { mip6CnGlobalStats 9 }
+
+    mip6CnBUsRejected   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected
+                 by the correspondent node.  If a Binding
+                 Acknowledgment message has been sent for the Binding
+                 Update request, the Status code field in the
+                 message will have a value greater than or equal to
+                 128.  Otherwise the Binding Update request will be
+                 silently discarded.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 9.5.1, 9.5.4"
+        ::= { mip6CnGlobalStats 10 }
+
+    mip6CnReasonUnspecified OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the correspondent node with status code in the
+                 Binding Acknowledgment message indicating 'reason
+                 unspecified' (Code 128).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8"
+        ::= { mip6CnGlobalStats 11 }
+
+    mip6CnInsufficientResource OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the correspondent node with status code in the
+                 Binding Acknowledgment message indicating
+                 'insufficient resources' (Code 130).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8"
+        ::= { mip6CnGlobalStats 12 }
+
+    mip6CnHomeRegnNotSupported OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "Total number of Binding Update requests rejected by
+                correspondent node with status code in the Binding
+                Acknowledgment message indicating 'home registration
+                not supported' (Code 131).
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6CounterDiscontinuityTime.
+               "
+        REFERENCE
+                "RFC 3775 : Section 10.3.1"
+        ::= { mip6CnGlobalStats 13 }
+
+    mip6CnSeqNumberOutOfWindow OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates rejected by
+                 correspondent node with status code in the Binding
+                 Acknowledgment message indicating 'sequence number
+                 out of window' (Code 135).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8, 9.5.1"
+        ::= { mip6CnGlobalStats 14 }
+
+    mip6CnExpiredHomeNonceIndex OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of Binding Updates rejected by
+                 correspondent node with status code in the Binding
+                 Acknowledgment message indicating 'expired home
+                 nonce index' (Code 136).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8, 9.5.1"
+        ::= { mip6CnGlobalStats 15 }
+
+    mip6CnExpiredCareOfNonceIndex OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of Binding Updates rejected by
+                 correspondent node with status code in the Binding
+                 Acknowledgment message indicating 'expired
+                 care-of nonce index' (Code 137).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8, 9.5.1"
+        ::= { mip6CnGlobalStats 16 }
+
+    mip6CnExpiredNonce OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of Binding Updates rejected by
+                 correspondent node with status code in the Binding
+                 Acknowledgment message indicating 'expired nonces'
+                 (Code 138), i.e., the correspondent node no longer
+                 recognizes the Home Nonce Index value and the
+                 Care-of Nonce Index value.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8, 9.5.1"
+        ::= { mip6CnGlobalStats 17 }
+
+    mip6CnRegTypeChangeDisallowed OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of Binding Updates rejected by
+                 correspondent node with status code in the Binding
+                 Acknowledgment message indicating 'registration
+                 type change disallowed' (Code 139), i.e., a binding
+                 already exists for the given home address and the
+                 home registration flag has a different value than
+                 the Home Registration (H) bit in the Binding Update.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8, 9.5.1"
+        ::= { mip6CnGlobalStats 18 }
+
+    -- The Correspondent Node statistics by mobile node
+
+    mip6CnCounterTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6CnCounterEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing each mobile ."
+        ::= { mip6CnStats 2 }
+
+    mip6CnCounterEntry OBJECT-TYPE
+        SYNTAX      Mip6CnCounterEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The set of correspondent node counters for a mobile
+                 node.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6BindingHomeAddress
+                 exceeds 113, then OIDs of column instances in
+                 this row will have more than 128 sub-identifiers and
+                 cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX   {    mip6BindingHomeAddressType,
+                     mip6BindingHomeAddress
+                }
+        ::= { mip6CnCounterTable 1 }
+
+    Mip6CnCounterEntry ::=
+        SEQUENCE {
+           mip6CnBURequestsAccepted       Counter32,
+           mip6CnBURequestsRejected       Counter32,
+           mip6CnBCEntryCreationTime      DateAndTime,
+           mip6CnBUAcceptedTime           DateAndTime,
+           mip6CnBURejectionTime          DateAndTime,
+           mip6CnBURejectionCode          Mip6BURequestRejectionCode,
+           mip6CnCtrDiscontinuityTime     TimeStamp
+        }
+
+    mip6CnBURequestsAccepted OBJECT-TYPE   --(Code 0,1)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests from the
+                 mobile node accepted by the correspondent node.
+                 If Binding Acknowledgment messages are sent, then
+                 the status code in the message will have a value
+                 less than 128.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CnCtrDiscontinuityTime.
+                "
+        ::= { mip6CnCounterEntry 1 }
+
+    mip6CnBURequestsRejected     OBJECT-TYPE
+                                      -- (Code 128 through Code 159)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "Total number of Binding Update requests from the
+                mobile node that have been rejected by the
+                correspondent node.  This includes the Binding Update
+                requests for which a Binding Acknowledgment message
+                has been sent with status code value greater than or
+                equal to 128 and the Binding Acknowledgment requests
+                that have been silently discarded.
+                Discontinuities in the value of this counter can
+                occur at re-initialization of the management system,
+                and at other times as indicated by the value of
+                mip6CnCtrDiscontinuityTime.
+               "
+        ::= { mip6CnCounterEntry 2 }
+
+    mip6CnBCEntryCreationTime        OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time when the current Binding Cache entry was
+                 created for the mobile node.
+                "
+        ::= { mip6CnCounterEntry 3 }
+
+    mip6CnBUAcceptedTime OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the last Binding Update was
+                 accepted by the correspondent node and the
+                 corresponding Binding Cache entry was updated.
+                "
+        ::= { mip6CnCounterEntry 4 }
+
+    mip6CnBURejectionTime   OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the last Binding Update message
+                 was rejected by the correspondent node.
+                 If there have been no rejections, then this object
+                 will be inaccessible.
+                "
+        ::= { mip6CnCounterEntry 5 }
+
+    mip6CnBURejectionCode  OBJECT-TYPE
+           SYNTAX      Mip6BURequestRejectionCode
+           MAX-ACCESS  read-only
+           STATUS      current
+           DESCRIPTION
+                  "If a Binding Acknowledgment is sent to the mobile
+                   node, this is the status code (> 128) that is
+                   returned in the Binding Acknowledgment.
+                   In case a Binding Acknowledgment is not sent to
+                   the mobile node, then this will be the value
+                   of the Status code that corresponds to the reason
+                   of the rejection.  If there have been no
+                   rejections, then this object will be inaccessible.
+                  "
+        REFERENCE
+                "RFC 3775 : Section 6.1.8"
+           ::= { mip6CnCounterEntry 6 }
+
+     mip6CnCtrDiscontinuityTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The value of sysUpTime on the most recent occasion
+                at which any one or more of counters in this row,
+                viz., instances of 'mip6CnBURequestsAccepted' and
+                'mip6CnBURequestsRejected', suffered a discontinuity.
+                If no such discontinuities have occurred since the
+                last re-initialization of the local management
+                subsystem, then this object will have a zero value.
+               "
+        ::= { mip6CnCounterEntry 7 }
+
+    -- Home agent group
+
+    mip6HaAdvsRecd OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of valid Router Advertisements
+                 received with the Home Agent (H) bit set, on
+                 all the links on which it is serving as a Home
+                 Agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 7"
+        ::= { mip6HaAdvertisement 1 }
+
+    mip6HaAdvsSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of unsolicited multicast Router
+                 Advertisements sent with the Home Agent (H) bit set,
+                 on all the links on which the router is serving as
+                 a Home Agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+        REFERENCE
+                "RFC 3775 : Section 7"
+        ::= { mip6HaAdvertisement 2 }
+
+    mip6HaConfTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6HaConfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+               "A table containing configurable advertisement
+                parameters for all interfaces on which the
+                home agent service is advertised.
+                It is RECOMMENDED that the last written values
+                of the objects in the conceptual rows of this
+
+                table will remain unchanged across reboots of
+                the managed entity provided that the interfaces
+                have not been renumbered after the reboot.
+               "
+        ::= { mip6HaAdvertisement 3 }
+
+    mip6HaConfEntry OBJECT-TYPE
+        SYNTAX      Mip6HaConfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+               "Advertisement parameters for an interface.
+                The instances of the columnar objects in this entry
+                pertain to the interface that is uniquely identified
+                by the ipv6InterfaceIfIndex of the interface.  The
+                same ipv6InterfaceIfIndex object is used to uniquely
+                identify instances of the columnar objects of this
+                conceptual row.
+               "
+        INDEX   { ipv6InterfaceIfIndex }
+        ::= { mip6HaConfTable 1 }
+
+    Mip6HaConfEntry    ::= SEQUENCE {
+          mip6HaAdvPreference               Integer32,
+          mip6HaAdvLifetime                 Integer32,
+          mip6HaPrefixAdv                   INTEGER,
+          mip6HaPrefixSolicitation          INTEGER,
+          mip6HaMCastCtlMsgSupport          INTEGER
+        }
+
+    mip6HaAdvPreference OBJECT-TYPE
+        SYNTAX      Integer32 (0..65536)
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+               "The preference value for the home agent to
+                be used in the Router Advertisements.  Higher
+                value denotes greater preference.
+               "
+        REFERENCE
+                "RFC 3775 : Section 7.4, 8.4"
+        ::= { mip6HaConfEntry 1 }
+
+    mip6HaAdvLifetime   OBJECT-TYPE
+        SYNTAX      Integer32 (1..65535)
+        UNITS       "seconds"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+               "The lifetime value for the home agent to be
+                used in the Router Advertisements.
+               "
+        REFERENCE
+                "RFC 3775 : Section 7.4"
+        ::= { mip6HaConfEntry 2 }
+
+    mip6HaPrefixAdv    OBJECT-TYPE
+        SYNTAX      INTEGER { enabled(1), disabled(2) }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "Indicates whether the home agent should support
+                 sending of the ICMP Mobile Prefix Advertisements.
+                 If it is disabled(2), the home agent will not
+                 send ICMP Mobile Prefix Advertisements to the
+                 mobile nodes.
+                 The state can be changed from enabled(1) to
+                 disabled(2) and vice versa by operator
+                 intervention.
+                 Causing the state to change from enabled(1) to
+                 disabled(2) will result in the home agent
+                 disabling the Prefix advertisement function.
+                 On the other hand, changing the status from
+                 disabled(2) to enabled(1) will start the prefix
+                 advertisement function.
+                "
+        REFERENCE
+                "RFC 3775 : Section 8.4"
+        ::= { mip6HaConfEntry 3}
+
+    mip6HaPrefixSolicitation   OBJECT-TYPE
+        SYNTAX      INTEGER { enabled(1), disabled(2) }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "Indicates whether the home agent should respond
+                 to ICMP Mobile Prefix Solicitation messages it
+                 receives from the mobile nodes.  By default, the
+                 value will be set to enabled(1).  If it is
+                 disabled(2), the home agent will not respond to
+                 any ICMP Mobile Prefix Solicitation messages.
+                 The state can be changed from enabled(1) to
+                 disabled(2), by operator intervention.  Causing
+                 the state to change from enabled(1) to
+                 disabled(2) will result in the home agent not
+                 responding to any ICMP Mobile Prefix
+                 Solicitation messages it receives from the
+                 mobile nodes.
+                "
+        REFERENCE
+                "RFC 3775 : Section 8.4"
+        ::= { mip6HaConfEntry 4}
+
+   mip6HaMCastCtlMsgSupport OBJECT-TYPE
+        SYNTAX      INTEGER { enabled(1), disabled(2) }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+                "Indicates whether the home agent should enable
+                 support for the processing of the multicast
+                 group membership control messages it receives
+                 from the mobile nodes.  By default, the value
+                 will be set to enabled(1).  If it is
+                 disabled(2), the home agent will not process
+                 any multicast group control messages it receives
+                 from the mobile nodes.
+                 The state can be changed from enabled(1) to
+                 disabled(2), by operator intervention.  Causing
+                 the state to change from enabled(1) to
+                 disabled(2) will result in the home agent
+                 disabling the processing of the multicast group
+                 control messages it received from the mobile
+                 nodes.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.4.3"
+        ::= { mip6HaConfEntry 5}
+
+    -- Registration Group counters HA
+
+    mip6HaGlobalStats OBJECT IDENTIFIER ::= { mip6HaStats 1 }
+
+    mip6HaHomeTestInitsRecd     OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Home Test Init messages received by
+                 the home agent.  This will include Home Test Init
+                 messages that failed the validity checks.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+          REFERENCE
+                   "RFC 3775 : Section 5.2.5"
+        ::= { mip6HaGlobalStats 1 }
+
+    mip6HaHomeTestsSent      OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Home Test messages sent by the
+                 home agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+         REFERENCE
+                   "RFC 3775 : Section 5.2.5"
+        ::= { mip6HaGlobalStats 2 }
+
+    mip6HaBUsRecd     OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates received by the
+                 home agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 3 }
+
+    mip6HaBUAcksSent    OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Acknowledgments sent
+                 by the home agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 4 }
+
+    mip6HaBRAdviceSent OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Acknowledgments sent
+                 by the home agent with Binding Refresh Advice
+                 mobility option included.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 5 }
+
+    mip6HaBUsAccepted   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Updates accepted by this HA.
+                 Binding Acknowledgment with status code of 0 or 1.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 6 }
+
+    mip6HaPrefDiscoverReqd OBJECT-TYPE        -- (Code 1)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The total number of Binding Acknowledgments sent by
+                 the home agent with status code indicating 'accepted
+                 but prefix discovery necessary'  (Code 1).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 7 }
+
+    mip6HaReasonUnspecified OBJECT-TYPE               -- (Code 128)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'reason
+                 unspecified' (Code 128).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 8 }
+
+    mip6HaAdmProhibited OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'administratively
+                 prohibited' (Code 129).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 9 }
+
+    mip6HaInsufficientResource OBJECT-TYPE            -- (Code 130)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'insufficient
+                 resources' (Code 130).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 9.5.2"
+        ::= { mip6HaGlobalStats 10 }
+
+    mip6HaHomeRegnNotSupported OBJECT-TYPE    -- (Code 131)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'home
+                 registration not supported' (Code 131).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 11 }
+
+    mip6HaNotHomeSubnet OBJECT-TYPE                   -- (Code 132)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'not home subnet'
+                 (Code 132).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 12 }
+
+    mip6HaNotHomeAgentForThisMN OBJECT-TYPE           -- (Code 133)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'not home agent
+                 for this mobile node' (Code 133).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.2"
+        ::= { mip6HaGlobalStats 13 }
+
+    mip6HaDupAddrDetectionFailed OBJECT-TYPE       -- (Code 134)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'Duplicate
+                 Address Detection failed' (Code 134).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6HaGlobalStats 14 }
+
+    mip6HaSeqNumberOutOfWindow OBJECT-TYPE            -- (Code 135)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'sequence number
+                 out of window' (Code 135).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 9.5.1"
+        ::= { mip6HaGlobalStats 15 }
+
+    mip6HaExpiredHomeNonceIndex OBJECT-TYPE           -- (Code 136)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'expired home
+                 nonce index' (Code 136).
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 9.5.1"
+        ::= { mip6HaGlobalStats 16 }
+
+    mip6HaRegTypeChangeDisallowed OBJECT-TYPE         -- (Code 139)
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of Binding Update requests rejected by
+                 the home agent with status code in the Binding
+                 Acknowledgment message indicating 'registration
+                 type change disallowed' (Code 139), i.e., a binding
+                 already exists for the given home address and the
+                 home registration flag has a different value than
+                 the Home Registration (H) bit in the Binding Update.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6CounterDiscontinuityTime.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 9.5.1"
+        ::= { mip6HaGlobalStats 17 }
+
+    -- Home agent registration Counters per node
+
+    mip6HaCounterTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6HaCounterEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "A table containing registration statistics for all
+                 mobile nodes registered with the home agent.
+                "
+        ::= { mip6HaStats 2 }
+
+    mip6HaCounterEntry  OBJECT-TYPE
+        SYNTAX      Mip6HaCounterEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Home agent registration statistics for a mobile
+                 node.
+
+                 Implementors need to be aware that if the total
+                 number of octets in mip6BindingHomeAddress
+                 exceeds 113, then OIDs of column instances in
+                 this row will have more than 128 sub-identifiers and
+                 cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
+                "
+        INDEX   { mip6BindingHomeAddressType,
+                  mip6BindingHomeAddress
+                }
+        ::= { mip6HaCounterTable 1 }
+
+    Mip6HaCounterEntry      ::= SEQUENCE {
+        mip6HaBURequestsAccepted       Counter32,
+        mip6HaBURequestsDenied         Counter32,
+        mip6HaBCEntryCreationTime      DateAndTime,
+        mip6HaBUAcceptedTime           DateAndTime,
+        mip6HaBURejectionTime          DateAndTime,
+        mip6HaRecentBURejectionCode    Mip6BURequestRejectionCode,
+        mip6HaCtrDiscontinuityTime     TimeStamp
+        }
+
+    mip6HaBURequestsAccepted OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of service requests for the mobile node
+                 accepted by the home agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6HaCtrDiscontinuityTime.
+                "
+        ::= { mip6HaCounterEntry 1 }
+
+    mip6HaBURequestsDenied   OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of service requests for the mobile node
+                 rejected by the home agent.
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times as indicated by the value of
+                 mip6HaCtrDiscontinuityTime.
+                "
+        ::= { mip6HaCounterEntry 2 }
+
+    mip6HaBCEntryCreationTime   OBJECT-TYPE
+        SYNTAX      DateAndTime
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time when the current Binding Cache entry was
+                 created for the mobile node.
+                "
+        ::= { mip6HaCounterEntry 3 }
+
+    mip6HaBUAcceptedTime  OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the last Binding Update was
+                 accepted by the home agent for this mobile node.
+                "
+        ::= { mip6HaCounterEntry 4 }
+
+    mip6HaBURejectionTime  OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time at which the last Binding Update was
+                 rejected by the home agent for this mobile node.
+                 If there have been no rejections, then this object
+                 will be inaccessible.
+                "
+        ::= { mip6HaCounterEntry 5 }
+
+    mip6HaRecentBURejectionCode  OBJECT-TYPE
+        SYNTAX      Mip6BURequestRejectionCode
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "If a Binding Acknowledgment is sent to the mobile
+                 node, this is the status code (> 128) that is
+                 returned in the Binding Acknowledgment.
+                 In case a Binding Acknowledgment is not sent to the
+                 mobile node, then this will be the value of the
+                 status code that corresponds to the reason of the
+                 rejection.
+                 If there have been no rejections, then this object
+                 will be inaccessible.
+                "
+        ::= { mip6HaCounterEntry 6 }
+
+     mip6HaCtrDiscontinuityTime OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "The value of sysUpTime on the most recent occasion
+                at which any one or more of counters in this row,
+                viz., instances of 'mip6HaBURequestsAccepted' and
+                'mip6HaBURequestsRejected', suffered a discontinuity.
+                If no such discontinuities have occurred since the
+                last re-initialization of the local management
+                subsystem, then this object will have a zero value.
+               "
+        ::= { mip6HaCounterEntry 7 }
+
+    -- Home Agent List Table
+
+    mip6HaListTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6HaListEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "This table models the Home Agents List that contains
+                 the list of all routers that are acting as home
+                 agents on each of the interfaces on which the home
+                 agent service is offered by this router.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.1"
+        ::= { mip6HaAdvertisement 4 }
+
+    mip6HaListEntry  OBJECT-TYPE
+        SYNTAX      Mip6HaListEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+               "Information about a router that is offering home
+                agent service.
+                The instances of the columnar objects in this entry
+                pertain to an interface for a particular value of
+                mip6HaLinkLocalAddressType and
+                mip6HaLinkLocalAddress.  The interface is uniquely
+                identified by its ipv6InterfaceIfIndex.  The same
+                ipv6InterfaceIfIndex object is used in conjunction
+                with the mip6HaLinkLocalAddressType and
+                mip6HaLinkLocalAddress to uniquely identify
+                instances of the columnar objects of this row.
+
+                Implementors need to be aware that if the total
+                number of octets in mip6HaLinkLocalAddress
+                exceeds 112, then OIDs of column instances in
+                this row will have more than 128 sub-identifiers and
+                cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
+               "
+        INDEX   { ipv6InterfaceIfIndex, mip6HaLinkLocalAddressType,
+                                        mip6HaLinkLocalAddress }
+        ::= { mip6HaListTable 1 }
+
+    Mip6HaListEntry      ::= SEQUENCE {
+        mip6HaLinkLocalAddressType      InetAddressType,
+        mip6HaLinkLocalAddress          InetAddress,
+        mip6HaPreference                Integer32,
+        mip6HaRecvLifeTime              Gauge32,
+        mip6HaRecvTimeStamp             DateAndTime
+        }
+
+    mip6HaLinkLocalAddressType  OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The address type for the link-local address
+                 of the home agent that follows.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.1"
+        ::= { mip6HaListEntry 1 }
+
+    mip6HaLinkLocalAddress  OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The link local address of the home agent.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding
+                 mip6HaLinkLocalAddressType object.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.1"
+        ::= { mip6HaListEntry 2 }
+
+   mip6HaPreference     OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The preference value of this home agent.
+                 Higher values indicate a more preferable home
+                 agent.  The preference value is obtained from
+                 the preference field of the received Router
+                 Advertisement.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.1"
+        ::= { mip6HaListEntry 3 }
+
+   mip6HaRecvLifeTime       OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The lifetime for this home agent.
+                "
+        REFERENCE
+                "RFC 3775 : Section 10.1"
+        ::= { mip6HaListEntry 4 }
+
+   mip6HaRecvTimeStamp  OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The time when the home agent advertisement was
+                 received.
+                "
+        ::= { mip6HaListEntry 5 }
+
+   --
+   -- The list of global addresses of a home agent in the
+   -- home agent list
+   --
+
+   mip6HaGlAddrTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF Mip6HaGlAddrEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "This table contains the global addresses of the home
+                 agents in the Home Agents List.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.1"
+        ::= { mip6HaAdvertisement 5 }
+
+    mip6HaGlAddrEntry  OBJECT-TYPE
+        SYNTAX      Mip6HaGlAddrEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+               "A global address for a home agent in the Home Agents
+                List.
+                The instances of the columnar objects in this entry
+                pertain to an interface for a particular value of
+                mip6HaLinkLocalAddressType, mip6HaLinkLocalAddress
+                and mip6HaGaAddrSeqNo.
+                The mip6HaGaAddrSeqNo object is used to distinguish
+                between multiple instances of the home agent global
+                addresses on the same interface for the same set of
+                mip6HaLinkLocalAddressType, mip6HaLinkLocalAddress,
+                values.
+                There is no upper-bound on the maximum number of
+                global addresses on an interface but, for practical
+                purposes, the upper-bound of the value
+                mip6HaGaAddrSeqNo is set to 1024.
+                The interface is uniquely identified by its
+                ipv6InterfaceIfIndex.  The same ipv6InterfaceIfIndex
+                object is used in conjunction with the
+                mip6HaLinkLocalAddressType, mip6HaLinkLocalAddress,
+                and mip6HaGaAddrSeqNo to uniquely identify instances
+                of the columnar objects of this row.
+
+                Implementors need to be aware that if the total
+                number of octets in mip6HaLinkLocalAddress
+                exceeds 111, then OIDs of column instances in
+                this row will have more than 128 sub-identifiers and
+                cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
+               "
+        INDEX   { ipv6InterfaceIfIndex,   mip6HaLinkLocalAddressType,
+                  mip6HaLinkLocalAddress, mip6HaGaAddrSeqNo }
+        ::= { mip6HaGlAddrTable 1 }
+
+    Mip6HaGlAddrEntry      ::= SEQUENCE {
+        mip6HaGaAddrSeqNo              Integer32,
+        mip6HaGaGlobalAddressType      InetAddressType,
+        mip6HaGaGlobalAddress          InetAddress
+    }
+
+    mip6HaGaAddrSeqNo  OBJECT-TYPE
+        SYNTAX      Integer32 (1..1024)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "The index that along with ipv6InterfaceIfIndex,
+                 mip6HaLinkLocalAddressType, and
+                 mip6HaLinkLocalAddress uniquely identifies this row.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.1"
+        ::= { mip6HaGlAddrEntry 1 }
+
+    mip6HaGaGlobalAddressType  OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The address type for the global address of the
+                 home agent that follows.
+                "
+        ::= { mip6HaGlAddrEntry 2 }
+
+    mip6HaGaGlobalAddress  OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "A global address of the home agent.
+
+                 The type of the address represented by this object
+                 is specified by the corresponding
+                 mip6HaGaGlobalAddressType object.
+                "
+        ::= { mip6HaGlAddrEntry 3 }
+
+--
+-- Notifications
+--
+
+    mip6MnRegistered NOTIFICATION-TYPE
+        OBJECTS   {
+                    mip6BindingTimeRegistered,
+                    mip6BindingCOAType,
+                    mip6BindingCOA
+                  }
+        STATUS    current
+        DESCRIPTION
+                "This notification is sent by a home agent when
+                 a mobile node registers with the home agent
+                 for the first time.
+                 Notifications will not be sent for subsequent
+                 updates and/or refreshes.
+                 The MO instances in the notifications will be
+                 identified by the mip6BindingHomeAddressType
+                 and mip6BindingHomeAddress for the mobile node
+                 in the mip6BindingCacheTable.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.1"
+        ::= { mip6Notifications 1 }
+
+    mip6MnDeRegistered NOTIFICATION-TYPE
+        OBJECTS   {
+                    mip6BindingTimeRegistered,
+                    mip6BindingCOAType,
+                    mip6BindingCOA
+                  }
+        STATUS    current
+        DESCRIPTION
+                "This notification is sent by a home agent every
+                 time a mobile node de-registers with the home
+                 agent by sending a Binding Update that requests
+                 the home agent to delete a binding.
+                 The MO instances in the notifications will be
+                 identified by the mip6BindingHomeAddressType
+                 and mip6BindingHomeAddress for the mobile node
+                 in the mip6BindingCacheTable.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.2"
+        ::= { mip6Notifications 2 }
+
+    mip6MnCOAChanged NOTIFICATION-TYPE
+        OBJECTS   {
+                    mip6BindingTimeRegistered,
+                    mip6BindingCOAType,
+                    mip6BindingCOA
+                  }
+        STATUS    current
+        DESCRIPTION
+                "This notification is sent by a home agent every
+                 time a mobile node sends a Binding Update with
+                 a new care-of address (for an existing Binding
+                 Cache entry).
+                 Notifications will not be sent for subsequent
+                 updates and/or refreshes for the same Care-of
+                 address.
+                 The registration of a new care-of address may
+                 indicate that the mobile node has moved or that
+                 the primary care-of address of the mobile node
+                 has become deprecated.
+                 The MO instances in the notifications will be
+                 identified by the mip6BindingHomeAddressType
+                 and mip6BindingHomeAddress for the mobile node
+                 in the mip6BindingCacheTable.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 11.5.2, 11.7.1"
+        ::= { mip6Notifications 3 }
+
+    mip6MnBindingExpiredAtHA NOTIFICATION-TYPE
+        OBJECTS   {
+                    mip6BindingTimeRegistered,
+                    mip6BindingCOAType,
+                    mip6BindingCOA
+                  }
+        STATUS    current
+        DESCRIPTION
+                "This notification is sent by a home agent when a
+                 binding for the mobile node at the home agent
+                 expired (no timely Binding Updates were received).
+                 The MO instances in the notifications will be
+                 identified by the mip6BindingHomeAddressType
+                 and mip6BindingHomeAddress for the mobile node
+                 in the mip6BindingCacheTable.
+                "
+           REFERENCE
+                   "RFC 3775 : Section 10.3.2"
+        ::= { mip6Notifications 4 }
+
+    mip6MnBindingExpiredAtCN NOTIFICATION-TYPE
+        OBJECTS   {
+                    mip6BindingTimeRegistered,
+                    mip6BindingCOAType,
+                    mip6BindingCOA
+                  }
+        STATUS    current
+        DESCRIPTION
+                "This notification is sent by a correspondent node
+                 when a binding for the mobile node at the
+                 correspondent node expired (no timely Binding
+                 Updates were received).
+                 The MO instances in the notifications will be
+                 identified by the mip6BindingHomeAddressType
+                 and mip6BindingHomeAddress for the mobile node
+                 in the mip6BindingCacheTable.
+                "
+        ::= { mip6Notifications 5 }
+
+    -- Conformance information
+   mip6Groups      OBJECT IDENTIFIER ::= { mip6Conformance 1 }
+   mip6Compliances OBJECT IDENTIFIER ::= { mip6Conformance 2 }
+
+    -- Units of conformance
+   mip6SystemGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6Capabilities,
+                  mip6Status
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for basic MIPv6
+                  monitoring."
+        ::= { mip6Groups 1 }
+
+   mip6BindingCacheGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6BindingCOAType,
+                  mip6BindingCOA,
+                  mip6BindingTimeRegistered,
+                  mip6BindingTimeGranted,
+                  mip6BindingTimeRemaining,
+                  mip6BindingMaxSeq,
+                  mip6BindingHomeRegn,
+                  mip6BindingUsageTS,
+                  mip6BindingUsageCount,
+                  mip6BindingAdminStatus
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring the
+                  Binding Cache.
+                "
+        ::= { mip6Groups 2 }
+
+   mip6BindingHstGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6BindingHstCOAType,
+                  mip6BindingHstCOA,
+                  mip6BindingHstTimeRegistered,
+                  mip6BindingHstTimeExpired,
+                  mip6BindingHstHomeRegn,
+                  mip6BindingHstUsageTS,
+                  mip6BindingHstUsageCount
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring the
+                  Binding History.  This can be used to monitor
+                  the movement of the mobile node.
+                "
+        ::= { mip6Groups 3 }
+
+   mip6TotalTrafficGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6InOctets,
+                  mip6HCInOctets,
+                  mip6InPkts,
+                  mip6HCInPkts,
+                  mip6OutOctets,
+                  mip6HCOutOctets,
+                  mip6OutPkts,
+                  mip6HCOutPkts,
+                  mip6CounterDiscontinuityTime
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring the
+                  total MIPv6 traffic.
+                "
+        ::= { mip6Groups 4 }
+
+   mip6NodeTrafficGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6NodeInOctets,
+                  mip6HCNodeInOctets,
+                  mip6NodeInPkts,
+                  mip6HCNodeInPkts,
+                  mip6NodeOutOctets,
+                  mip6HCNodeOutOctets,
+                  mip6NodeOutPkts,
+                  mip6HCNodeOutPkts,
+                  mip6NodeCtrDiscontinuityTime
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring the
+                  MIPv6 traffic due to a mobile node.
+                "
+        ::= { mip6Groups 5 }
+
+   mip6MnSystemGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6MnHomeAddressState
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for basic monitoring
+                  of the mobile node.
+                "
+        ::= { mip6Groups 6 }
+
+   mip6MnConfGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6MnDiscoveryRequests,
+                  mip6MnDiscoveryReplies,
+                  mip6MnDiscoveryTimeouts,
+                  mip6MnPrefixSolicitationsSent,
+                  mip6MnPrefixAdvsRecd,
+                  mip6MnPrefixAdvsIgnored,
+                  mip6MnMovedToFN,
+                  mip6MnMovedToHN
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  the advertisement-related info on the
+                  mobile node.
+                "
+        ::= { mip6Groups 7 }
+
+   mip6MnRegistrationGroup  OBJECT-GROUP
+        OBJECTS {
+                  mip6MnBLCOAType,
+                  mip6MnBLCOA,
+                  mip6MnBLLifeTimeRequested,
+                  mip6MnBLLifeTimeGranted,
+                  mip6MnBLMaxSeq,
+                  mip6MnBLTimeSent,
+                  mip6MnBLAccepted,
+                  mip6MnBLAcceptedTime,
+                  mip6MnBLRetransmissions,
+                  mip6MnBLDontSendBUFlag,
+               --
+               -- Binding Update List
+               --
+                  mip6MnMobilityMessagesSent,
+                  mip6MnMobilityMessagesRecd,
+                  mip6MnBUsToHA,
+                  mip6MnBUAcksFromHA,
+                  mip6MnBUsToCN,
+                  mip6MnBUAcksFromCN,
+                  mip6MnBindingErrorsFromCN,
+                  mip6MnICMPErrorsRecd,
+                  mip6MnBRRequestsRecd
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  the registration statistics for the mobile node.
+                "
+        ::= { mip6Groups 8 }
+
+   mip6CnStatsGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6CnBURequestsAccepted,
+                  mip6CnBURequestsRejected,
+                  mip6CnBCEntryCreationTime,
+                  mip6CnBUAcceptedTime,
+                  mip6CnBURejectionTime,
+                  mip6CnBURejectionCode,
+                  mip6CnCtrDiscontinuityTime
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  the control messages and corresponding
+                  statistics for each mobile node
+                  communicating with the correspondent
+                  node.
+                "
+        ::= { mip6Groups 9 }
+
+   mip6HaSystemGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6HaAdvsRecd,
+                  mip6HaAdvsSent,
+                  mip6HaAdvPreference,
+                  mip6HaAdvLifetime,
+                  mip6HaPrefixAdv,
+                  mip6HaPrefixSolicitation,
+                  mip6HaMCastCtlMsgSupport
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  the advertisement-related parameters and
+                  statistics for the home agent.
+                "
+        ::= { mip6Groups 10 }
+
+    mip6HaListGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6HaPreference,
+                  mip6HaRecvLifeTime,
+                  mip6HaRecvTimeStamp,
+                  mip6HaGaGlobalAddressType,
+                  mip6HaGaGlobalAddress
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  the Home Agent List on the home agent.
+                "
+        ::= { mip6Groups 11 }
+
+    mip6HaStatsGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6HaBURequestsAccepted,
+                  mip6HaBURequestsDenied,
+                  mip6HaBCEntryCreationTime,
+                  mip6HaBUAcceptedTime,
+                  mip6HaBURejectionTime,
+                  mip6HaRecentBURejectionCode,
+                  mip6HaCtrDiscontinuityTime
+
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  registration-related statistics on the home agent.
+                "
+        ::= { mip6Groups 12 }
+
+    mip6CnGlobalStatsGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6CnHomeTestInitsRecd,
+                  mip6CnHomeTestsSent,
+                  mip6CnCareOfTestInitsRecd,
+                  mip6CnCareOfTestsSent,
+                  mip6CnBUsRecd,
+                  mip6CnBUAcksSent,
+                  mip6CnBRsSent,
+                  mip6CnBindingErrors,
+                  mip6CnBUsAccepted,
+                  mip6CnBUsRejected,
+                  mip6CnReasonUnspecified,
+                  mip6CnInsufficientResource,
+                  mip6CnHomeRegnNotSupported,
+                  mip6CnSeqNumberOutOfWindow,
+                  mip6CnExpiredHomeNonceIndex,
+                  mip6CnExpiredCareOfNonceIndex,
+                  mip6CnExpiredNonce,
+                  mip6CnRegTypeChangeDisallowed
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  advertisement and registration statistics on
+                  a correspondent node.
+                "
+        ::= { mip6Groups 13 }
+
+    mip6HaGlobalStatsGroup   OBJECT-GROUP
+        OBJECTS {
+                  mip6HaHomeTestInitsRecd,
+                  mip6HaHomeTestsSent,
+                  mip6HaBUsRecd,
+                  mip6HaBUAcksSent,
+                  mip6HaBRAdviceSent,
+                  mip6HaBUsAccepted,
+                  mip6HaPrefDiscoverReqd,
+                  mip6HaReasonUnspecified,
+                  mip6HaAdmProhibited,
+                  mip6HaInsufficientResource,
+                  mip6HaHomeRegnNotSupported,
+                  mip6HaNotHomeSubnet,
+                  mip6HaNotHomeAgentForThisMN,
+                  mip6HaDupAddrDetectionFailed,
+                  mip6HaSeqNumberOutOfWindow,
+                  mip6HaExpiredHomeNonceIndex,
+                  mip6HaRegTypeChangeDisallowed
+
+       }
+        STATUS  current
+        DESCRIPTION
+                " A collection of objects for monitoring
+                  advertisement and registration statistics on
+                  a home agent.
+                "
+        ::= { mip6Groups 14 }
+
+    mip6BindingCacheCtlGroup    OBJECT-GROUP
+        OBJECTS {
+                  mip6BindingAdminStatus
+       }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects for controlling the
+                 Binding Cache.
+                "
+        ::= { mip6Groups 15 }
+
+    mip6NotificationGroup   NOTIFICATION-GROUP
+        NOTIFICATIONS {
+                 mip6MnRegistered,
+                 mip6MnDeRegistered,
+                 mip6MnCOAChanged,
+                 mip6MnBindingExpiredAtHA,
+                 mip6MnBindingExpiredAtCN
+       }
+        STATUS  current
+        DESCRIPTION
+                "A collection of notifications from a home agent
+                 or correspondent node to the Manager about the
+                 status of a mobile node.
+                "
+        ::= { mip6Groups 16 }
+
+    -- Compliance statements
+
+   mip6CoreCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB.
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6SystemGroup }
+        ::= { mip6Compliances 1 }
+
+   mip6Compliance2 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and support
+                monitoring of the Binding Cache and the Total
+                Traffic.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6SystemGroup,
+                               mip6BindingCacheGroup,
+                               mip6TotalTrafficGroup
+                                }
+        ::= { mip6Compliances 2 }
+
+   mip6Compliance3 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support monitoring of the Binding Cache,
+                the Binding History, the total traffic, and
+                the mobile node-wide traffic.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHstHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the
+                --     mip6BindingHstHomeAddress object.
+                --
+                -- OBJECT      mip6BindingHstHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the
+                --     mip6BindingHstHomeAddress object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6SystemGroup,
+                               mip6BindingCacheGroup,
+                               mip6BindingHstGroup,
+                               mip6TotalTrafficGroup,
+                               mip6NodeTrafficGroup
+                              }
+        ::= { mip6Compliances 3 }
+
+   mip6CoreReadOnlyCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB without support
+                for read-write (i.e., in read-only mode).
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6SystemGroup }
+
+        OBJECT      mip6Status
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { mip6Compliances 4 }
+
+   mip6ReadOnlyCompliance2 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB without support
+                for read-write (i.e., in read-only mode) and
+                support monitoring of the Binding Cache and Total
+                Traffic.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+
+            MANDATORY-GROUPS { mip6SystemGroup,
+                               mip6BindingCacheGroup,
+                               mip6TotalTrafficGroup
+                                }
+        OBJECT      mip6Status
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6BindingAdminStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { mip6Compliances 5 }
+
+   mip6ReadOnlyCompliance3 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB without support
+                for read-write (i.e., in read-only mode) and support
+                monitoring of the Binding Cache, the Binding History,
+                the total traffic, and the mobile node-wide traffic.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHstHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the
+                --     mip6BindingHstHomeAddress object.
+                --
+
+                -- OBJECT      mip6BindingHstHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the
+                --     mip6BindingHstHomeAddress object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6SystemGroup,
+                               mip6BindingCacheGroup,
+                               mip6BindingHstGroup,
+                               mip6TotalTrafficGroup,
+                               mip6NodeTrafficGroup
+                              }
+        OBJECT      mip6Status
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6BindingAdminStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { mip6Compliances 6 }
+
+   mip6MnCoreCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support monitoring of the basic mobile node
+                functionality.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6MnHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6MnHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6MnHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+
+                --     ipv6 addresses for the mip6MnHomeAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6MnSystemGroup
+                              }
+        ::= { mip6Compliances 7 }
+
+   mip6MnCompliance2 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support monitoring of the mobile node
+                functionality specifically the Discovery- and
+                Registration-related statistics,
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6MnHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6MnHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6MnHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6MnHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6MnBLNodeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6MnBLNodeAddress
+                --     object.
+                --
+                -- OBJECT      mip6MnBLNodeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6MnBLNodeAddress
+                --     object.
+
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6MnSystemGroup,
+                               mip6MnConfGroup,
+                               mip6MnRegistrationGroup,
+                               mip6TotalTrafficGroup
+                              }
+        ::= { mip6Compliances 8 }
+
+   mip6CnCoreCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for SNMP entities
+                 that implement the MOBILEIPV6-MIB and
+                 support monitoring of the basic correspondent node
+                 functionality.
+                "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6CnGlobalStatsGroup,
+                               mip6TotalTrafficGroup
+                              }
+        ::= { mip6Compliances 9 }
+
+   mip6CnCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support monitoring of the basic correspondent node
+                functionality.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6CnGlobalStatsGroup,
+                               mip6CnStatsGroup,
+                               mip6TotalTrafficGroup
+                              }
+        ::= { mip6Compliances 10 }
+
+   mip6HaCoreCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for SNMP entities
+                 that implement the MOBILEIPV6-MIB and
+                 support monitoring of the basic home agent
+                 functionality.
+                "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6HaSystemGroup
+                              }
+        ::= { mip6Compliances 11 }
+
+   mip6HaCompliance2 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support monitoring of the home agent
+                functionality specifically the Home Agent List
+                and the home-agent-registration-related statistics,
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddressType
+
+                -- SYNTAX      InetAddressType { ipv6z(4) }
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddress
+                -- SYNTAX      InetAddress (SIZE(20))
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6HaSystemGroup,
+                               mip6HaListGroup,
+                               mip6HaStatsGroup,
+                               mip6HaGlobalStatsGroup,
+                               mip6TotalTrafficGroup
+                              }
+        ::= { mip6Compliances 12 }
+
+   mip6HaCompliance3 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support monitoring and control of the home agent
+                functionality specifically the Home Agent List
+                and the home-agent-registration-related statistics,
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddressType
+                -- SYNTAX      InetAddressType { ipv6z(4) }
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddress
+                -- SYNTAX      InetAddress (SIZE(20))
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6HaSystemGroup,
+                               mip6HaListGroup,
+                               mip6HaStatsGroup,
+                               mip6HaGlobalStatsGroup,
+                               mip6BindingCacheCtlGroup,
+                               mip6TotalTrafficGroup
+                              }
+        ::= { mip6Compliances 13 }
+
+   mip6HaCoreReadOnlyCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB without support
+                for read-write (i.e., in read-only mode) and
+                support monitoring of the basic home agent
+                functionality.
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6HaSystemGroup
+                              }
+        OBJECT      mip6HaAdvPreference
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaAdvLifetime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaPrefixAdv
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaPrefixSolicitation
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaMCastCtlMsgSupport
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { mip6Compliances 14 }
+
+   mip6HaReadOnlyCompliance2 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB without support
+                for read-write (i.e., in read-only mode) and
+                support monitoring of the home agent
+                functionality specifically the Home Agent List
+                and the home-agent-registration-related statistics.
+
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddressType
+                -- SYNTAX      InetAddressType { ipv6z(4) }
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddress
+                -- SYNTAX      InetAddress (SIZE(20))
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6HaSystemGroup,
+                               mip6HaListGroup,
+                               mip6HaStatsGroup,
+                               mip6HaGlobalStatsGroup,
+                               mip6TotalTrafficGroup
+                              }
+
+        OBJECT      mip6HaAdvPreference
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaAdvLifetime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaPrefixAdv
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaPrefixSolicitation
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaMCastCtlMsgSupport
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { mip6Compliances 15 }
+
+   mip6HaReadOnlyCompliance3 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB without support
+                for read-write (i.e., in read-only mode) and
+                support monitoring and control of the home agent
+                functionality specifically the Home Agent List
+                and the home-agent-registration-related statistics,
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddressType
+                -- SYNTAX      InetAddressType { ipv6z(4) }
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+                -- OBJECT      mip6HaLinkLocalAddress
+                -- SYNTAX      InetAddress (SIZE(20))
+                -- DESCRIPTION
+                --     This MIB module requires support for local
+                --     ipv6 addresses for the mip6HaLinkLocalAddress
+                --     object.
+                --
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6HaSystemGroup,
+                               mip6HaListGroup,
+                               mip6HaStatsGroup,
+                               mip6HaGlobalStatsGroup,
+                               mip6BindingCacheCtlGroup,
+                               mip6TotalTrafficGroup
+                              }
+
+        OBJECT      mip6HaAdvPreference
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaAdvLifetime
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaPrefixAdv
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaPrefixSolicitation
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6HaMCastCtlMsgSupport
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT      mip6BindingAdminStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { mip6Compliances 16 }
+
+    mip6NotificationCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+               "The compliance statement for SNMP entities
+                that implement the MOBILEIPV6-MIB and
+                support Notification from home agent or
+                correspondent node to management stations
+                about the mobile node status.
+                There are a number of INDEX objects that cannot be
+                represented in the form of OBJECT clauses in SMIv2,
+                but for which there are compliance requirements,
+                expressed in OBJECT clause form in this description:
+
+                -- OBJECT      mip6BindingHomeAddressType
+                -- SYNTAX      InetAddressType { ipv6(2) }
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+                --
+                -- OBJECT      mip6BindingHomeAddress
+                -- SYNTAX      InetAddress (SIZE(16))
+                -- DESCRIPTION
+                --     This MIB module requires support for global
+                --     ipv6 addresses for the mip6BindingHomeAddress
+                --     object.
+               "
+        MODULE  -- this module
+            MANDATORY-GROUPS { mip6NotificationGroup
+                              }
+        ::= { mip6Compliances 17 }
+
+   END
diff --git a/snmp_builder/mibs/MPLS-FTN-STD-MIB.mib b/snmp_builder/mibs/MPLS-FTN-STD-MIB.mib
new file mode 100644
index 0000000..e538055
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-FTN-STD-MIB.mib
@@ -0,0 +1,1030 @@
+MPLS-FTN-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64, Integer32
+       FROM SNMPv2-SMI                                   -- [RFC2578]
+   RowStatus, StorageType, RowPointer,
+   TEXTUAL-CONVENTION, TimeStamp
+       FROM SNMPv2-TC                                    -- [RFC2579]
+   MODULE-COMPLIANCE, OBJECT-GROUP
+       FROM SNMPv2-CONF                                  -- [RFC2580]
+   InterfaceIndexOrZero,
+   ifGeneralInformationGroup, ifCounterDiscontinuityGroup
+       FROM IF-MIB                                       -- [RFC2863]
+   SnmpAdminString
+       FROM SNMP-FRAMEWORK-MIB                           -- [RFC3411]
+   Dscp
+       FROM DIFFSERV-DSCP-TC                             -- [RFC3289]
+   InetAddressType, InetAddress, InetPortNumber
+       FROM INET-ADDRESS-MIB                             -- [RFC3291]
+   mplsStdMIB
+       FROM MPLS-TC-STD-MIB                              -- [RFC3811]
+
+   ;
+
+mplsFTNStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200406030000Z"  -- June 6, 2004
+   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
+   CONTACT-INFO
+       "
+                Thomas D. Nadeau
+        Postal: Cisco Systems, Inc.
+                250 Apollo Drive
+                Chelmsford, MA 01824
+        Tel:    +1-978-244-3051
+        Email:  tnadeau@cisco.com
+
+                Cheenu Srinivasan
+        Postal: Bloomberg L.P.
+                499 Park Avenue
+                New York, NY 10022
+        Tel:    +1-212-893-3682
+        Email:  cheenu@bloomberg.net
+
+                Arun Viswanathan
+        Postal: Force10 Networks, Inc.
+                1440 McCarthy Blvd
+                Milpitas, CA 95035
+        Tel:    +1-408-571-3516
+        Email:  arunv@force10networks.com
+
+        IETF MPLS Working Group email: mpls@uu.net"
+   DESCRIPTION
+        "Copyright (C) The Internet Society (2004). The
+        initial version of this MIB module was published
+        in RFC 3814. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html
+
+        This MIB module contains managed object definitions for
+        specifying FEC to NHLFE (FTN) mappings and corresponding
+        performance for MPLS."
+
+   -- Revision history.
+
+   REVISION
+       "200406030000Z"  -- June 3, 2004
+   DESCRIPTION
+       "Initial version issued as part of RFC 3814."
+    ::= { mplsStdMIB 8 }
+
+-- TEXTUAL-CONVENTIONs used in this MIB.
+MplsFTNEntryIndex ::= TEXTUAL-CONVENTION
+   STATUS              current
+   DESCRIPTION
+       "Index for an entry in mplsFTNTable."
+   SYNTAX              Unsigned32 (1..4294967295)
+
+MplsFTNEntryIndexOrZero ::= TEXTUAL-CONVENTION
+   STATUS              current
+   DESCRIPTION
+       "Index for an entry in mplsFTNTable or the special value
+        zero. The value zero is object-specific and must
+        therefore be defined as part of the description of any
+        object which uses this syntax.  Examples of the usage
+        of zero might include situations when none or all
+        entries in mplsFTNTable need to be referenced."
+   SYNTAX              Unsigned32 (0..4294967295)
+
+-- Top-Level Components of this MIB.
+
+mplsFTNNotifications OBJECT IDENTIFIER ::= { mplsFTNStdMIB 0 }
+mplsFTNObjects       OBJECT IDENTIFIER ::= { mplsFTNStdMIB 1 }
+mplsFTNConformance   OBJECT IDENTIFIER ::= { mplsFTNStdMIB 2 }
+
+-- Next free index in mplsFTNTable.
+mplsFTNIndexNext OBJECT-TYPE
+   SYNTAX              MplsFTNEntryIndexOrZero
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "This object contains the next available valid value to
+        be used for mplsFTNIndex when creating entries in the
+        mplsFTNTable.
+
+        When creating a new conceptual row (configuration
+        entry) in mplsFTNTable with an SNMP SET operation the
+        command generator (Network Management Application) must
+        first issue a management protocol retrieval operation
+        to obtain the current value of this object.
+
+        If the command responder (agent) does not wish to allow
+        creation of more entries in mplsFTNTable, possibly
+        because of resource exhaustion, this object MUST return
+        a value of 0.
+
+        If a non-zero value is returned the Network Management
+
+        Application must determine whether the value is indeed
+        still unused since two Network Management Applications
+        may attempt to create a row simultaneously and use the
+        same value.
+
+        If it is currently unused and the SET succeeds, the
+        agent MUST change the value of this object to a
+        currently unused non-zero value (according to an
+        implementation specific algorithm) or zero (if no
+        further row creation will be permitted).
+
+        If the value is in use, however, the SET fails and the
+        Network Management Application must then reread this
+        object to obtain a new usable value."
+   ::= { mplsFTNObjects 1 }
+
+-- Last time an object in mplsFTNTable changed.
+mplsFTNTableLastChanged OBJECT-TYPE
+   SYNTAX              TimeStamp
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "Indicates the last time an entry was added, deleted or
+        modified in mplsFTNTable.  Management stations should
+        consult this object to determine if mplsFTNTable
+        requires their attention.  This object is particularly
+        useful for applications performing a retrieval on
+        mplsFTNTable to ensure that the table is not modified
+        during the retrieval operation."
+   ::=  { mplsFTNObjects 2 }
+
+-- Table of FTN entries.
+mplsFTNTable  OBJECT-TYPE
+   SYNTAX          SEQUENCE OF MplsFTNEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+       "This table contains the currently defined FTN entries.
+        This table allows FEC to NHLFE mappings to be
+        specified.  Each entry in this table defines a rule to
+        be applied to incoming packets (on interfaces that the
+        FTN entry is activated on using mplsFTNMapTable) and an
+        action to be taken on matching packets
+        (mplsFTNActionPointer).
+
+        This table supports 6-tuple matching rules based on one
+        or more of source address range, destination address
+        range, source port range, destination port range, IPv4
+
+        Protocol field or IPv6 next-header field and the
+        DiffServ Code Point (DSCP) to be specified.
+
+        The action pointer points either to instance of
+        mplsXCEntry in MPLS-LSR-STD-MIB when the NHLFE is a non-
+        TE LSP, or to an instance of mplsTunnelEntry in the
+        MPLS-TE-STD-MIB when the NHLFE is an originating TE
+        tunnel."
+   REFERENCE
+       "J. Postel, Internet Protocol, RFC 791, STD 5, September
+        1981
+
+        Deering, S., and R. Hinden, Internet Protocol, Version
+        6 (IPv6) Specification, RFC 2460, December 1998
+
+        Nichols, K, Blake, S., Baker, F. and D. Black,
+        Definition of the Differentiated Services Field (DS
+        Field) in the IPv4 and IPv6 Headers, RFC 2474, December
+        1998
+
+        Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS
+        Label Switch Router Management Information Base,
+        RFC 3813
+
+        Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS
+        Traffic Engineering Management Information Base,
+        RFC 3812"
+   ::=  { mplsFTNObjects 3 }
+
+mplsFTNEntry  OBJECT-TYPE
+   SYNTAX          MplsFTNEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+       "Each entry represents one FTN entry which defines a
+        rule to compare incoming packets with and an action to
+        be taken on matching packets."
+   INDEX { mplsFTNIndex }
+   ::=  { mplsFTNTable 1 }
+
+MplsFTNEntry  ::=  SEQUENCE {
+      mplsFTNIndex               MplsFTNEntryIndex,
+      mplsFTNRowStatus           RowStatus,
+      mplsFTNDescr               SnmpAdminString,
+      mplsFTNMask                BITS,
+      mplsFTNAddrType            InetAddressType,
+      mplsFTNSourceAddrMin       InetAddress,
+      mplsFTNSourceAddrMax       InetAddress,
+      mplsFTNDestAddrMin         InetAddress,
+      mplsFTNDestAddrMax         InetAddress,
+      mplsFTNSourcePortMin       InetPortNumber,
+      mplsFTNSourcePortMax       InetPortNumber,
+      mplsFTNDestPortMin         InetPortNumber,
+      mplsFTNDestPortMax         InetPortNumber,
+      mplsFTNProtocol            Integer32,
+      mplsFTNDscp                Dscp,
+      mplsFTNActionType          INTEGER,
+      mplsFTNActionPointer       RowPointer,
+      mplsFTNStorageType         StorageType
+   }
+
+mplsFTNIndex   OBJECT-TYPE
+   SYNTAX              MplsFTNEntryIndex
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "This is the unique index for a conceptual row in
+        mplsFTNTable.
+
+        To create a new conceptual row in mplsFTNTable a
+        Network Management Application SHOULD retrieve the
+        current value of mplsFTNIndexNext to determine the next
+        valid available value of mplsFTNIndex."
+   ::= { mplsFTNEntry 1 }
+
+mplsFTNRowStatus OBJECT-TYPE
+   SYNTAX              RowStatus
+   MAX-ACCESS          read-create
+   STATUS              current
+   DESCRIPTION
+       "Used for controlling the creation and deletion of this
+        row. All writeable objects in this row may be modified
+        at any time. If a Network Management Application
+        attempts to delete a conceptual row by setting this
+        object to 'destroy' and there are one or more entries
+        in mplsFTNMapTable pointing to the row (i.e., when
+        mplsFTNIndex of the conceptual row being deleted is
+        equal to mplsFTNMapCurrIndex for one or more entries in
+        mplsFTNMapTable), the agent MUST also destroy the
+        corresponding entries in mplsFTNMapTable."
+   ::= { mplsFTNEntry 2 }
+
+mplsFTNDescr   OBJECT-TYPE
+   SYNTAX              SnmpAdminString
+   MAX-ACCESS          read-create
+   STATUS              current
+   DESCRIPTION
+       "The description of this FTN entry. Since the index for
+        this table has no particular significance or meaning,
+        this object should contain some meaningful text that an
+        operator could use to further distinguish entries in
+        this table."
+   ::= { mplsFTNEntry 3 }
+
+mplsFTNMask OBJECT-TYPE
+   SYNTAX             BITS {
+                       sourceAddr(0),
+                       destAddr(1),
+                       sourcePort(2),
+                       destPort(3),
+                       protocol(4),
+                       dscp(5)
+                      }
+   MAX-ACCESS          read-create
+   STATUS              current
+   DESCRIPTION
+       "This bit map indicates which of the fields described
+        next, namely source address range, destination address
+        range, source port range, destination port range, IPv4
+        Protocol field or IPv6 next-header field and
+        Differentiated Services Code Point (DSCP) is active for
+        this FTN entry. If a particular bit is set to zero then
+        the corresponding field in the packet MUST be ignored
+        for comparison purposes."
+   ::= { mplsFTNEntry 4 }
+
+mplsFTNAddrType OBJECT-TYPE
+   SYNTAX             InetAddressType
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "This object determines the type of address contained in
+        the source and destination address objects
+        (mplsFTNSourceAddrMin, mplsFTNSourceAddrMax,
+        mplsFTNDestAddrMin and mplsFTNDestAddrMax) of a
+        conceptual row.
+
+        This object MUST NOT be set to unknown(0) when
+        mplsFTNMask has bit positions sourceAddr(0) or
+        destAddr(1) set to one.
+
+        When both these bit positions of mplsFTNMask are set to
+        zero the value of mplsFTNAddrType SHOULD be set to
+        unknown(0) and the corresponding source and destination
+
+        address objects SHOULD be set to zero-length strings."
+   ::= { mplsFTNEntry 5 }
+
+mplsFTNSourceAddrMin OBJECT-TYPE
+   SYNTAX             InetAddress
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The lower end of the source address range. The type of
+        this object is determined by the corresponding
+        mplsFTNAddrType object."
+   ::= { mplsFTNEntry 6 }
+
+mplsFTNSourceAddrMax OBJECT-TYPE
+   SYNTAX             InetAddress
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The upper end of the source address range. The type of
+        this object is determined by the corresponding
+        mplsFTNAddrType object."
+   ::= { mplsFTNEntry 7 }
+
+mplsFTNDestAddrMin OBJECT-TYPE
+   SYNTAX             InetAddress
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The lower end of the destination address range. The
+        type of this object is determined by the corresponding
+        mplsFTNAddrType object."
+   ::= { mplsFTNEntry 8 }
+
+mplsFTNDestAddrMax OBJECT-TYPE
+   SYNTAX             InetAddress
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The higher end of the destination address range. The
+        type of this object is determined by the corresponding
+        mplsFTNAddrType object."
+   ::= { mplsFTNEntry 9 }
+
+mplsFTNSourcePortMin OBJECT-TYPE
+   SYNTAX             InetPortNumber
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The lower end of the source port range."
+   DEFVAL { 0 }
+   ::= { mplsFTNEntry 10 }
+
+mplsFTNSourcePortMax OBJECT-TYPE
+   SYNTAX             InetPortNumber
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The higher end of the source port range "
+   DEFVAL { 65535 }
+   ::= { mplsFTNEntry 11 }
+
+mplsFTNDestPortMin OBJECT-TYPE
+   SYNTAX             InetPortNumber
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The lower end of the destination port range."
+   DEFVAL { 0 }
+   ::= { mplsFTNEntry 12 }
+
+mplsFTNDestPortMax OBJECT-TYPE
+   SYNTAX             InetPortNumber
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The higher end of the destination port range."
+   DEFVAL { 65535 }
+   ::= { mplsFTNEntry 13 }
+
+mplsFTNProtocol OBJECT-TYPE
+   SYNTAX             Integer32 (0..255)
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The IP protocol to match against the IPv4 protocol
+        number or IPv6 Next-Header number in the packet. A
+        value of 255 means match all.  Note that the protocol
+        number of 255 is reserved by IANA, and Next-Header
+        number of 0 is used in IPv6."
+   DEFVAL { 255 }
+   ::= { mplsFTNEntry 14 }
+
+mplsFTNDscp OBJECT-TYPE
+   SYNTAX             Dscp
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The contents of the DSCP field."
+   REFERENCE
+       "Nichols, K., Blake, S., Baker, F. and D. Black,
+        Definition of the Differentiated Services Field (DS
+        Field) in the IPv4 and IPv6 Headers, RFC 2474, December
+        1998."
+   ::= { mplsFTNEntry 15 }
+
+mplsFTNActionType OBJECT-TYPE
+   SYNTAX    INTEGER {
+                redirectLsp(1),   -- redirect into LSP
+                redirectTunnel(2) -- redirect into tunnel
+             }
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The type of action to be taken on packets matching this
+        FTN entry."
+   ::= { mplsFTNEntry 16 }
+
+mplsFTNActionPointer OBJECT-TYPE
+   SYNTAX             RowPointer
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "If mplsFTNActionType is redirectLsp(1), then this
+        object MUST contain zeroDotZero or point to a instance
+        of mplsXCEntry indicating the LSP to redirect matching
+        packets to.
+
+        If mplsFTNActionType is redirectTunnel(2), then this
+        object MUST contain zeroDotZero or point to a instance
+        of mplsTunnelEntry indicating the MPLS TE tunnel to
+        redirect matching packets to.
+
+        If this object points to a conceptual row instance in a
+        table consistent with mplsFTNActionType but this
+        instance does not currently exist then no action will
+        be taken on packets matching such an FTN entry till
+        this instance comes into existence.
+
+        If this object contains zeroDotZero then no action will
+        be taken on packets matching such an FTN entry till it
+        is populated with a valid pointer consistent with the
+        value of mplsFTNActionType as explained above."
+   ::= { mplsFTNEntry 17 }
+
+mplsFTNStorageType OBJECT-TYPE
+   SYNTAX             StorageType
+   MAX-ACCESS         read-create
+   STATUS             current
+   DESCRIPTION
+       "The storage type for this FTN entry. Conceptual rows
+        having the value 'permanent' need not allow write-
+        access to any columnar objects in the row."
+   DEFVAL { nonVolatile }
+   ::= { mplsFTNEntry 18 }
+
+-- End of mplsFTNTable.
+
+-- Last time an object in mplsFTNMapTable changed.
+
+mplsFTNMapTableLastChanged OBJECT-TYPE
+   SYNTAX              TimeStamp
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "Indicates the last time an entry was added, deleted or
+        modified in mplsFTNMapTable. Management stations should
+        consult this object to determine if the table requires
+        their attention.  This object is particularly useful
+        for applications performing a retrieval on
+        mplsFTNMapTable to ensure that the table is not
+        modified during the retrieval operation."
+   ::=  { mplsFTNObjects 4 }
+
+-- FTN to interface mapping table.
+
+mplsFTNMapTable OBJECT-TYPE
+   SYNTAX              SEQUENCE OF MplsFTNMapEntry
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "This table contains objects which provide the
+        capability to apply or map FTN rules as defined by
+        entries in mplsFTNTable to specific interfaces in the
+        system.  FTN rules are compared with incoming packets
+        in the order in which they are applied on an interface.
+
+        The indexing structure of mplsFTNMapTable is as
+        follows.
+
+        - mplsFTNMapIndex indicates the interface to which the
+          rule is being applied.  A value of 0 represents the
+          application of the rule to all interfaces.
+
+        - mplsFTNMapPrevIndex specifies the rule on the
+          interface prior to the one being applied.  A value of
+          0 specifies that the rule is being inserted at the
+          head of the list of rules currently applied to the
+          interface.
+
+        - mplsFTNMapCurrIndex is the index in mplsFTNTable
+          corresponding to the rule being applied.
+
+        This indexing structure makes the entries in the table
+        behave like items in a linked-list.  The object
+        mplsFTNMapPrevIndex in each conceptual row is a pointer
+        to the previous entry that is applied to a particular
+        interface.  This allows a new entry to be 'inserted' at
+        an arbitrary position in a list of entries currently
+        applied to an interface.  This object is self-
+        adjusting, i.e., its value is automatically adjusted by
+        the agent, if necessary, after an insertion or deletion
+        operation.
+
+        Using this linked-list structure, one can retrieve FTN
+        entries in the order of application on a per-interface
+        basis as follows:
+
+        - To determine the first FTN entry on an interface
+          with index ifIndex perform a GETNEXT retrieval
+          operation on mplsFTNMapRowStatus.ifIndex.0.0; the
+          returned object, if one exists, is (say)
+          mplsFTNMapRowStatus.ifIndex.0.n (mplsFTNMapRowStatus
+          is the first accessible columnar object in the
+          conceptual row). Then the index of the first FTN
+          entry applied on this interface is n.
+
+        - To determine the FTN entry applied to an interface
+          after the one indexed by n perform a GETNEXT
+          retrieval operation on
+          mplsFTNMapRowStatus.ifIndex.n.0.  If such an entry
+          exists the returned object would be of the form
+          mplsFTNMapRowStatus.ifIndex.n.m.  Then the index of
+          the next FTN entry applied on this interface is m.
+
+        - If the FTN entry indexed by n is the last entry
+          applied to the interface with index ifIndex then the
+          object returned would either be:
+
+          1.mplsFTNMapRowStatus.ifIndexNext.0.k, where
+            ifIndexNext is the index of the next interface in
+
+            ifTable to which an FTN entry has been applied, in
+            which case k is the index of the first FTN entry
+            applied to the interface with index ifIndexNext;
+
+          or:
+
+          2.mplsFTNMapStorageType.firstIfIndex.0.p, if there
+            are no more entries in mplsFTNMapTable, where
+            firstIfIndex is the first entry in ifTable to
+            which an FTN entry has been mapped.
+
+        Use the above steps to retrieve all the applied FTN
+        entries on a per-interface basis in application order.
+        Note that the number of retrieval operations is the
+        same as the number of applied FTN entries (i.e., the
+        minimum number of GETNEXT operations needed using any
+        indexing scheme).
+
+        Agents MUST NOT allow the same FTN entry as specified
+        by mplsFTNMapCurrIndex to be applied multiple times to
+        the same interface.
+
+        Agents MUST NOT allow the creation of rows in this
+        table until the corresponding rows are created in the
+        mplsFTNTable.
+
+        If a row in mplsFTNTable is destroyed, the agent MUST
+        destroy the corresponding entries (i.e., ones with a
+        matching value of mplsFTNCurrIndex) in this table as
+        well."
+   ::=  { mplsFTNObjects 5 }
+
+mplsFTNMapEntry OBJECT-TYPE
+   SYNTAX              MplsFTNMapEntry
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "Each conceptual row represents the application of an
+        FTN rule at a specific position in the list of FTN
+        rules applied on an interface. "
+   INDEX {
+         mplsFTNMapIndex,
+         mplsFTNMapPrevIndex,
+         mplsFTNMapCurrIndex
+   }
+   ::=  { mplsFTNMapTable 1 }
+
+MplsFTNMapEntry  ::=  SEQUENCE {
+
+      mplsFTNMapIndex       InterfaceIndexOrZero,
+      mplsFTNMapPrevIndex    MplsFTNEntryIndexOrZero,
+      mplsFTNMapCurrIndex    MplsFTNEntryIndex,
+      mplsFTNMapRowStatus    RowStatus,
+      mplsFTNMapStorageType  StorageType
+   }
+
+mplsFTNMapIndex OBJECT-TYPE
+   SYNTAX              InterfaceIndexOrZero
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "The interface index that this FTN entry is being
+        applied to. A value of zero indicates an entry that is
+        applied all interfaces.
+
+        Entries mapped to an interface by specifying its (non-
+        zero) interface index in mplsFTNMapIndex are applied
+        ahead of entries with mplsFTNMapIndex equal to zero."
+   ::= { mplsFTNMapEntry 1 }
+
+mplsFTNMapPrevIndex OBJECT-TYPE
+   SYNTAX              MplsFTNEntryIndexOrZero
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "The index of the previous FTN entry that was applied to
+        this interface. The special value zero indicates that
+        this should be the first FTN entry in the list."
+   ::=  { mplsFTNMapEntry 2 }
+
+mplsFTNMapCurrIndex OBJECT-TYPE
+   SYNTAX              MplsFTNEntryIndex
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "Index of the current FTN entry that is being applied to
+        this interface."
+   ::=  { mplsFTNMapEntry 3 }
+
+mplsFTNMapRowStatus OBJECT-TYPE
+   SYNTAX              RowStatus {
+                             active(1),
+                             createAndGo(4),
+                             destroy(6)
+                          }
+   MAX-ACCESS          read-create
+   STATUS              current
+   DESCRIPTION
+       "Used for controlling the creation and deletion of this
+        row.
+
+        All writable objects in this row may be modified at any
+        time.
+
+        If a conceptual row in mplsFTNMapTable points to a
+        conceptual row in mplsFTNTable which is subsequently
+        deleted, the corresponding conceptual row in
+        mplsFTNMapTable MUST also be deleted by the agent."
+   ::=  { mplsFTNMapEntry 4 }
+
+mplsFTNMapStorageType OBJECT-TYPE
+   SYNTAX              StorageType
+   MAX-ACCESS          read-create
+   STATUS              current
+   DESCRIPTION
+       "The storage type for this entry.  Conceptual rows
+        having the value 'permanent' need not allow write-
+        access to any columnar objects in this row."
+   DEFVAL { nonVolatile }
+   ::= { mplsFTNMapEntry 5 }
+
+-- End of mplsFTNMapTable
+
+-- FTN entry performance table
+
+mplsFTNPerfTable OBJECT-TYPE
+   SYNTAX              SEQUENCE OF MplsFTNPerfEntry
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "This table contains performance statistics on FTN
+        entries on a per-interface basis."
+   ::= { mplsFTNObjects 6 }
+
+mplsFTNPerfEntry OBJECT-TYPE
+   SYNTAX              MplsFTNPerfEntry
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "Each entry contains performance information for the
+        specified interface and an FTN entry mapped to this
+        interface."
+   INDEX  { mplsFTNPerfIndex, mplsFTNPerfCurrIndex }
+   ::=  { mplsFTNPerfTable 1 }
+
+MplsFTNPerfEntry  ::=  SEQUENCE {
+      mplsFTNPerfIndex                     InterfaceIndexOrZero,
+      mplsFTNPerfCurrIndex                 MplsFTNEntryIndex,
+      mplsFTNPerfMatchedPackets            Counter64,
+      mplsFTNPerfMatchedOctets             Counter64,
+      mplsFTNPerfDiscontinuityTime         TimeStamp
+   }
+
+mplsFTNPerfIndex OBJECT-TYPE
+   SYNTAX              InterfaceIndexOrZero
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "The interface index of an interface that an FTN entry
+        has been applied/mapped to.  Each instance of this
+        object corresponds to an instance of mplsFTNMapIndex."
+   ::= { mplsFTNPerfEntry 1 }
+
+mplsFTNPerfCurrIndex OBJECT-TYPE
+   SYNTAX              MplsFTNEntryIndex
+   MAX-ACCESS          not-accessible
+   STATUS              current
+   DESCRIPTION
+       "Index of an FTN entry that has been applied/mapped to
+        the specified interface.  Each instance of this object
+        corresponds to an instance of mplsFTNMapCurrIndex."
+   ::=  { mplsFTNPerfEntry 2 }
+
+mplsFTNPerfMatchedPackets OBJECT-TYPE
+   SYNTAX              Counter64
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "Number of packets that matched the specified FTN entry
+        if it is applied/mapped to the specified interface.
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsFTNDiscontinuityTime."
+   ::= { mplsFTNPerfEntry 3 }
+
+mplsFTNPerfMatchedOctets OBJECT-TYPE
+   SYNTAX              Counter64
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "Number of octets that matched the specified FTN entry
+        if it is applied/mapped to the specified interface.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsFTNDiscontinuityTime."
+   ::= { mplsFTNPerfEntry 4 }
+
+mplsFTNPerfDiscontinuityTime OBJECT-TYPE
+   SYNTAX              TimeStamp
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "The value of sysUpTime on the most recent occasion at
+        which any one or more of this entry's counters suffered
+        a discontinuity.  If no such discontinuities have
+        occurred since the last re-initialization of the local
+        management subsystem, then this object contains a zero
+        value."
+   ::= { mplsFTNPerfEntry 5 }
+
+-- End of mplsFTNPerfTable
+
+-- Module compliance.
+
+-- Top level object IDs.
+
+mplsFTNGroups
+   OBJECT IDENTIFIER ::= { mplsFTNConformance 1 }
+mplsFTNCompliances
+   OBJECT IDENTIFIER ::= { mplsFTNConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+mplsFTNModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that provide full
+        support for MPLS-FTN-STD-MIB."
+
+   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
+   MANDATORY-GROUPS {
+      ifGeneralInformationGroup,
+      ifCounterDiscontinuityGroup
+   }
+
+   MODULE -- This module.
+   MANDATORY-GROUPS {
+      mplsFTNRuleGroup,
+      mplsFTNMapGroup,
+      mplsFTNPerfGroup
+
+   }
+
+   OBJECT mplsFTNAddrType
+   SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+   DESCRIPTION
+       "An implementation is only required to support IPv4
+        and/or IPv6 addresses.  An implementation is only
+        required to support the address types that are actually
+        supported on the LSR."
+
+   OBJECT mplsFTNSourceAddrMin
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   DESCRIPTION
+       "An implementation is only required to support IPv4
+        and/or IPv6 addresses.  An implementation is only
+        required to support the address types that are actually
+        supported on the LSR."
+
+   OBJECT mplsFTNSourceAddrMax
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   DESCRIPTION
+       "An implementation is only required to support IPv4
+        and/or IPv6 addresses.  An implementation is only
+        required to support the address types that are actually
+        supported on the LSR."
+
+   OBJECT mplsFTNDestAddrMin
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   DESCRIPTION
+       "An implementation is only required to support IPv4
+        and/or IPv6 addresses.  An implementation is only
+        required to support the address types that are actually
+        supported on the LSR."
+
+   OBJECT mplsFTNDestAddrMax
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   DESCRIPTION
+       "An implementation is only required to support IPv4
+        and/or IPv6 addresses.  An implementation is only
+        required to support the address types that are actually
+        supported on the LSR."
+   ::= { mplsFTNCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+mplsFTNModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance requirement for implementations that only
+
+        provide read-only support for MPLS-FTN-STD-MIB. Such
+        devices can then be monitored but cannot be configured
+        using this MIB module."
+
+   MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
+   MANDATORY-GROUPS {
+      ifGeneralInformationGroup,
+      ifCounterDiscontinuityGroup
+   }
+
+   MODULE -- This module
+   MANDATORY-GROUPS {
+      mplsFTNRuleGroup,
+      mplsFTNMapGroup,
+      mplsFTNPerfGroup
+   }
+
+   OBJECT mplsFTNIndexNext
+   MIN-ACCESS   not-accessible
+   DESCRIPTION
+       "This object is not needed when mplsFTNTable is
+        implemented as read-only."
+
+   OBJECT mplsFTNRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required, and active is the only
+        status that needs to be supported."
+
+   OBJECT mplsFTNDescr
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNMask
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNAddrType
+   SYNTAX       InetAddressType { ipv4(1), ipv6(2) }
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required. An implementation is only
+        required to support IPv4 and IPv6 addresses."
+
+   OBJECT mplsFTNSourceAddrMin
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required. An implementation is only
+        required to support IPv4 and IPv6 addresses."
+
+   OBJECT mplsFTNSourceAddrMax
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required. An implementation is only
+        required to support IPv4 and IPv6 addresses."
+
+   OBJECT mplsFTNDestAddrMin
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required. An implementation is only
+        required to support IPv4 and IPv6 addresses."
+
+   OBJECT mplsFTNDestAddrMax
+   SYNTAX       InetAddress (SIZE (4 | 20))
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required. An implementation is only
+        required to support IPv4 and IPv6 addresses."
+
+   OBJECT mplsFTNSourcePortMin
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNSourcePortMax
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNDestPortMin
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNDestPortMax
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNProtocol
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNActionType
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNActionPointer
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNDscp
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+
+   OBJECT mplsFTNMapRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required, and active(1) is the only
+        status that needs to be supported."
+
+   OBJECT mplsFTNMapStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION
+       "Write access is not required."
+   ::= { mplsFTNCompliances 2 }
+
+-- Units of conformance.
+mplsFTNRuleGroup OBJECT-GROUP
+   OBJECTS {
+         mplsFTNIndexNext,
+         mplsFTNTableLastChanged,
+         mplsFTNRowStatus,
+         mplsFTNDescr,
+         mplsFTNMask,
+         mplsFTNAddrType,
+         mplsFTNSourceAddrMin,
+         mplsFTNSourceAddrMax,
+         mplsFTNDestAddrMin,
+         mplsFTNDestAddrMax,
+         mplsFTNSourcePortMin,
+         mplsFTNSourcePortMax,
+         mplsFTNDestPortMin,
+         mplsFTNDestPortMax,
+         mplsFTNProtocol,
+         mplsFTNActionType,
+         mplsFTNActionPointer,
+         mplsFTNDscp,
+         mplsFTNStorageType
+   }
+   STATUS current
+   DESCRIPTION
+       "Collection of objects that implement MPLS FTN rules."
+   ::= { mplsFTNGroups 1 }
+
+mplsFTNMapGroup OBJECT-GROUP
+   OBJECTS {
+         mplsFTNMapTableLastChanged,
+         mplsFTNMapRowStatus,
+         mplsFTNMapStorageType
+   }
+   STATUS current
+   DESCRIPTION
+       "Collection of objects that implement activation of MPLS
+        FTN entries on interfaces."
+   ::= { mplsFTNGroups 2 }
+
+mplsFTNPerfGroup OBJECT-GROUP
+   OBJECTS {
+         mplsFTNPerfMatchedPackets,
+         mplsFTNPerfMatchedOctets,
+         mplsFTNPerfDiscontinuityTime
+   }
+   STATUS current
+   DESCRIPTION
+       "Collection of objects providing MPLS FTN performance
+        information."
+   ::= { mplsFTNGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-L3VPN-STD-MIB.mib b/snmp_builder/mibs/MPLS-L3VPN-STD-MIB.mib
new file mode 100644
index 0000000..851c0fd
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-L3VPN-STD-MIB.mib
@@ -0,0 +1,1588 @@
+MPLS-L3VPN-STD-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   Integer32, Counter32, Unsigned32, Gauge32
+      FROM SNMPv2-SMI                                     -- [RFC2578]
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF                                    -- [RFC2580]
+   TEXTUAL-CONVENTION, TruthValue, RowStatus,
+   TimeStamp, StorageType
+      FROM SNMPv2-TC                                      -- [RFC2579]
+   InterfaceIndex, InterfaceIndexOrZero
+      FROM IF-MIB                                         -- [RFC2863]
+   VPNIdOrZero
+     FROM VPN-TC-STD-MIB                                  -- [RFC4265]
+   SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB                             -- [RFC3411]
+   IANAipRouteProtocol
+      FROM IANA-RTPROTO-MIB                               -- [RTPROTO]
+   InetAddress, InetAddressType,
+   InetAddressPrefixLength,
+   InetAutonomousSystemNumber
+      FROM INET-ADDRESS-MIB                               -- [RFC4001]
+   mplsStdMIB
+      FROM MPLS-TC-STD-MIB                                -- [RFC3811]
+
+   MplsIndexType
+      FROM MPLS-LSR-STD-MIB                               -- [RFC3813]
+   ;
+
+mplsL3VpnMIB MODULE-IDENTITY
+   LAST-UPDATED "200601230000Z"  -- 23 January 2006
+   ORGANIZATION "IETF Layer-3 Virtual Private
+                 Networks Working Group."
+   CONTACT-INFO
+          "        Thomas D. Nadeau
+                   tnadeau@cisco.com
+
+                   Harmen van der Linde
+                   havander@cisco.com
+
+                   Comments and discussion to l3vpn@ietf.org"
+   DESCRIPTION
+        "This MIB contains managed object definitions for the
+         Layer-3 Multiprotocol Label Switching Virtual
+         Private Networks.
+
+        Copyright (C) The Internet Society (2006).  This
+        version of this MIB module is part of RFC4382; see
+        the RFC itself for full legal notices."
+  -- Revision history.
+  REVISION
+      "200601230000Z"  -- 23 January 2006
+   DESCRIPTION
+      "Initial version.  Published as RFC 4382."
+   ::= { mplsStdMIB 11 }
+
+-- Textual Conventions.
+MplsL3VpnName ::= TEXTUAL-CONVENTION
+   STATUS        current
+   DESCRIPTION
+       "An identifier that is assigned to each MPLS/BGP VPN and
+        is used to uniquely identify it.  This is assigned by the
+        system operator or NMS and SHOULD be unique throughout
+        the MPLS domain.  If this is the case, then this identifier
+        can then be used at any LSR within a specific MPLS domain
+        to identify this MPLS/BGP VPN.  It may also be possible to
+        preserve the uniqueness of this identifier across MPLS
+        domain boundaries, in which case this identifier can then
+        be used to uniquely identify MPLS/BGP VPNs on a more global
+        basis.  This object MAY be set to the VPN ID as defined in
+        RFC 2685."
+   REFERENCE
+        "RFC 2685 Fox B., et al, 'Virtual Private
+
+         Networks Identifier', September 1999."
+   SYNTAX OCTET STRING (SIZE (0..31))
+
+MplsL3VpnRouteDistinguisher ::= TEXTUAL-CONVENTION
+   STATUS        current
+   DESCRIPTION
+       "Syntax for a route distinguisher and route target
+        as defined in [RFC4364]."
+   REFERENCE
+        "[RFC4364]"
+   SYNTAX  OCTET STRING(SIZE (0..256))
+
+MplsL3VpnRtType ::= TEXTUAL-CONVENTION
+   STATUS        current
+   DESCRIPTION
+       "Used to define the type of a route target usage.
+        Route targets can be specified to be imported,
+        exported, or both.  For a complete definition of a
+        route target, see [RFC4364]."
+   REFERENCE
+        "[RFC4364]"
+   SYNTAX INTEGER { import(1), export(2), both(3) }
+
+-- Top level components of this MIB.
+mplsL3VpnNotifications OBJECT IDENTIFIER ::= { mplsL3VpnMIB 0 }
+mplsL3VpnObjects       OBJECT IDENTIFIER ::= { mplsL3VpnMIB 1 }
+mplsL3VpnScalars       OBJECT IDENTIFIER ::= { mplsL3VpnObjects 1 }
+mplsL3VpnConf          OBJECT IDENTIFIER ::= { mplsL3VpnObjects 2 }
+mplsL3VpnPerf          OBJECT IDENTIFIER ::= { mplsL3VpnObjects 3 }
+mplsL3VpnRoute         OBJECT IDENTIFIER ::= { mplsL3VpnObjects 4 }
+mplsL3VpnConformance   OBJECT IDENTIFIER ::= { mplsL3VpnMIB 2 }
+
+--
+-- Scalar Objects
+--
+
+mplsL3VpnConfiguredVrfs OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The number of VRFs that are configured on this node."
+   ::= { mplsL3VpnScalars 1 }
+
+mplsL3VpnActiveVrfs OBJECT-TYPE
+   SYNTAX        Gauge32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The number of VRFs that are active on this node.
+        That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus
+        object value is equal to operational (1)."
+   ::= { mplsL3VpnScalars 2 }
+
+mplsL3VpnConnectedInterfaces OBJECT-TYPE
+   SYNTAX        Gauge32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Total number of interfaces connected to a VRF."
+   ::= { mplsL3VpnScalars 3 }
+
+mplsL3VpnNotificationEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "If this object is true, then it enables the
+         generation of all notifications defined in
+         this MIB.  This object's value should be
+         preserved across agent reboots."
+   REFERENCE
+       "See also [RFC3413] for explanation that
+        notifications are under the ultimate control of the
+        MIB modules in this document."
+   DEFVAL { false }
+   ::= { mplsL3VpnScalars 4 }
+
+mplsL3VpnVrfConfMaxPossRts  OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+     "Denotes maximum number of routes that the device
+      will allow all VRFs jointly to hold.  If this value is
+      set to 0, this indicates that the device is
+      unable to determine the absolute maximum.  In this
+      case, the configured maximum MAY not actually
+      be allowed by the device."
+   ::= { mplsL3VpnScalars 5 }
+
+mplsL3VpnVrfConfRteMxThrshTime  OBJECT-TYPE
+   SYNTAX        Unsigned32
+   UNITS         "seconds"
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+     "Denotes the interval in seconds, at which the route max threshold
+      notification may be reissued after the maximum value has been
+      exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and
+      mplsL3VpnVrfConfHighRteThresh are equal) and the initial
+      notification has been issued.  This value is intended to prevent
+      continuous generation of notifications by an agent in the event
+      that routes are continually added to a VRF after it has reached
+      its maximum value.  If this value is set to 0, the agent should
+      only issue a single notification at the time that the maximum
+      threshold has been reached, and should not issue any more
+      notifications until the value of routes has fallen below the
+      configured threshold value.  This is the recommended default
+      behavior."
+   DEFVAL { 0 }
+   ::= { mplsL3VpnScalars 6 }
+
+mplsL3VpnIllLblRcvThrsh OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "The number of illegally received labels above which
+        the mplsNumVrfSecIllglLblThrshExcd notification
+        is issued.  The persistence of this value mimics
+        that of the device's configuration."
+   ::= { mplsL3VpnScalars 7 }
+
+-- VPN Interface Configuration Table
+
+mplsL3VpnIfConfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsL3VpnIfConfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per-interface MPLS capability
+        and associated information."
+   ::= { mplsL3VpnConf 1 }
+
+mplsL3VpnIfConfEntry OBJECT-TYPE
+   SYNTAX        MplsL3VpnIfConfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every interface capable of supporting MPLS L3VPN.
+        Each entry in this table is meant to correspond to
+        an entry in the Interfaces Table."
+   INDEX       { mplsL3VpnVrfName, mplsL3VpnIfConfIndex }
+   ::= { mplsL3VpnIfConfTable 1 }
+
+MplsL3VpnIfConfEntry ::= SEQUENCE {
+  mplsL3VpnIfConfIndex             InterfaceIndex,
+  mplsL3VpnIfVpnClassification     INTEGER,
+  mplsL3VpnIfVpnRouteDistProtocol  BITS,
+  mplsL3VpnIfConfStorageType       StorageType,
+  mplsL3VpnIfConfRowStatus         RowStatus
+}
+
+mplsL3VpnIfConfIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the
+        mplsL3VpnIfConfTable.  A non-zero index for an
+        entry indicates the ifIndex for the corresponding
+        interface entry in the MPLS-VPN-layer in the ifTable.
+        Note that this table does not necessarily correspond
+        one-to-one with all entries in the Interface MIB
+        having an ifType of MPLS-layer; rather, only those
+        that are enabled for MPLS L3VPN functionality."
+   REFERENCE
+       "RFC2863"
+   ::= { mplsL3VpnIfConfEntry 1 }
+
+mplsL3VpnIfVpnClassification OBJECT-TYPE
+   SYNTAX        INTEGER { carrierOfCarrier (1),
+                           enterprise (2),
+                           interProvider (3)
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Denotes whether this link participates in a
+        carrier's carrier, enterprise, or inter-provider
+        scenario."
+   DEFVAL { enterprise }
+   ::= { mplsL3VpnIfConfEntry 2 }
+
+mplsL3VpnIfVpnRouteDistProtocol OBJECT-TYPE
+   SYNTAX        BITS { none (0),
+                        bgp (1),
+                        ospf (2),
+                        rip(3),
+                        isis(4),
+                        static(5),
+                        other (6)
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Denotes the route distribution protocol across the
+        PE-CE link.  Note that more than one routing protocol
+        may be enabled at the same time; thus, this object is
+        specified as a bitmask.  For example, static(5) and
+        ospf(2) are a typical configuration."
+   ::= { mplsL3VpnIfConfEntry 3 }
+
+mplsL3VpnIfConfStorageType  OBJECT-TYPE
+   SYNTAX      StorageType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "The storage type for this VPN If entry.
+        Conceptual rows having the value 'permanent'
+        need not allow write access to any columnar
+        objects in the row."
+   REFERENCE
+        "See RFC2579."
+   DEFVAL { volatile }
+   ::= { mplsL3VpnIfConfEntry 4 }
+
+mplsL3VpnIfConfRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  Rows in this
+        table signify that the specified interface is
+        associated with this VRF.  If the row creation
+        operation succeeds, the interface will have been
+        associated with the specified VRF, otherwise the
+        agent MUST not allow the association.  If the agent
+        only allows read-only operations on this table, it
+        MUST create entries in this table as they are created
+        on the device.  When a row in this table is in
+        active(1) state, no objects in that row can be
+        modified except mplsL3VpnIfConfStorageType and
+        mplsL3VpnIfConfRowStatus."
+   ::= { mplsL3VpnIfConfEntry 5 }
+
+-- VRF Configuration Table
+
+mplsL3VpnVrfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsL3VpnVrfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per-interface MPLS L3VPN
+        VRF Table capability and associated information.
+        Entries in this table define VRF routing instances
+        associated with MPLS/VPN interfaces.  Note that
+        multiple interfaces can belong to the same VRF
+        instance.  The collection of all VRF instances
+        comprises an actual VPN."
+   ::= { mplsL3VpnConf 2 }
+
+mplsL3VpnVrfEntry OBJECT-TYPE
+   SYNTAX        MplsL3VpnVrfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every VRF capable of supporting MPLS L3VPN.  The
+        indexing provides an ordering of VRFs per-VPN
+        interface."
+   INDEX       { mplsL3VpnVrfName }
+   ::= { mplsL3VpnVrfTable 1 }
+MplsL3VpnVrfEntry ::= SEQUENCE {
+  mplsL3VpnVrfName                      MplsL3VpnName,
+  mplsL3VpnVrfVpnId                     VPNIdOrZero,
+  mplsL3VpnVrfDescription               SnmpAdminString,
+  mplsL3VpnVrfRD                        MplsL3VpnRouteDistinguisher,
+  mplsL3VpnVrfCreationTime              TimeStamp,
+  mplsL3VpnVrfOperStatus                INTEGER,
+  mplsL3VpnVrfActiveInterfaces          Gauge32,
+  mplsL3VpnVrfAssociatedInterfaces      Unsigned32,
+  mplsL3VpnVrfConfMidRteThresh          Unsigned32,
+  mplsL3VpnVrfConfHighRteThresh         Unsigned32,
+  mplsL3VpnVrfConfMaxRoutes             Unsigned32,
+  mplsL3VpnVrfConfLastChanged           TimeStamp,
+  mplsL3VpnVrfConfRowStatus             RowStatus,
+  mplsL3VpnVrfConfAdminStatus           INTEGER,
+  mplsL3VpnVrfConfStorageType           StorageType
+}
+
+mplsL3VpnVrfName OBJECT-TYPE
+   SYNTAX        MplsL3VpnName
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "The human-readable name of this VPN.  This MAY
+        be equivalent to the [RFC2685] VPN-ID, but may
+        also vary.  If it is set to the VPN ID, it MUST
+        be equivalent to the value of mplsL3VpnVrfVpnId.
+        It is strongly recommended that all sites supporting
+        VRFs that are part of the same VPN use the same
+        naming convention for VRFs as well as the same VPN
+        ID."
+   REFERENCE
+       "[RFC2685]"
+   ::= { mplsL3VpnVrfEntry 1 }
+
+mplsL3VpnVrfVpnId OBJECT-TYPE
+   SYNTAX        VPNIdOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The VPN ID as specified in [RFC2685].  If a VPN ID
+        has not been specified for this VRF, then this
+        variable SHOULD be set to a zero-length OCTET
+        STRING."
+   ::= { mplsL3VpnVrfEntry 2 }
+
+mplsL3VpnVrfDescription OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The human-readable description of this VRF."
+   DEFVAL { "" }
+   ::= { mplsL3VpnVrfEntry 3 }
+
+mplsL3VpnVrfRD OBJECT-TYPE
+   SYNTAX        MplsL3VpnRouteDistinguisher
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The route distinguisher for this VRF."
+   DEFVAL { "" }
+   ::= { mplsL3VpnVrfEntry 4 }
+
+mplsL3VpnVrfCreationTime OBJECT-TYPE
+   SYNTAX        TimeStamp
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The time at which this VRF entry was created."
+   ::= { mplsL3VpnVrfEntry 5 }
+
+mplsL3VpnVrfOperStatus OBJECT-TYPE
+   SYNTAX        INTEGER { up (1),
+                           down (2)
+                         }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes whether or not a VRF is operational.  A VRF is
+        up(1) when there is at least one interface associated
+        with the VRF whose ifOperStatus is up(1).  A VRF is
+        down(2) when:
+        a. There does not exist at least one interface whose
+           ifOperStatus is up(1).
+        b. There are no interfaces associated with the VRF."
+   ::= { mplsL3VpnVrfEntry 6 }
+
+mplsL3VpnVrfActiveInterfaces OBJECT-TYPE
+   SYNTAX        Gauge32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Total number of interfaces connected to this VRF with
+        ifOperStatus = up(1).
+
+        This value should increase when an interface is associated
+        with the corresponding VRF and its corresponding ifOperStatus
+        is equal to up(1).  If an interface is associated whose
+        ifOperStatus is not up(1), then the value is not incremented
+        until such time as it transitions to this state.
+
+        This value should be decremented when an interface is
+        disassociated with a VRF or the corresponding ifOperStatus
+        transitions out of the up(1) state to any other state.
+       "
+   ::= { mplsL3VpnVrfEntry 7 }
+
+mplsL3VpnVrfAssociatedInterfaces OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Total number of interfaces connected to this VRF
+        (independent of ifOperStatus type)."
+   ::= { mplsL3VpnVrfEntry 8 }
+
+mplsL3VpnVrfConfMidRteThresh    OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "Denotes mid-level water marker for the number
+      of routes that this VRF may hold."
+  DEFVAL { 0 }
+  ::= { mplsL3VpnVrfEntry 9 }
+
+mplsL3VpnVrfConfHighRteThresh  OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "Denotes high-level water marker for the number of
+      routes that this VRF may hold."
+   DEFVAL { 0 }
+  ::= { mplsL3VpnVrfEntry 10 }
+
+mplsL3VpnVrfConfMaxRoutes  OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "Denotes maximum number of routes that this VRF is
+      configured to hold.  This value MUST be less than or
+      equal to mplsL3VpnVrfConfMaxPossRts unless it is set
+      to 0."
+   DEFVAL { 0 }
+  ::= { mplsL3VpnVrfEntry 11 }
+
+mplsL3VpnVrfConfLastChanged  OBJECT-TYPE
+   SYNTAX        TimeStamp
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+     "The value of sysUpTime at the time of the last
+      change of this table entry, which includes changes of
+      VRF parameters defined in this table or addition or
+      deletion of interfaces associated with this VRF."
+  ::= { mplsL3VpnVrfEntry 12 }
+
+mplsL3VpnVrfConfRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.
+
+        When a row in this table is in active(1) state, no
+        objects in that row can be modified except
+        mplsL3VpnVrfConfAdminStatus, mplsL3VpnVrfConfRowStatus,
+        and mplsL3VpnVrfConfStorageType."
+  ::= { mplsL3VpnVrfEntry 13 }
+
+mplsL3VpnVrfConfAdminStatus OBJECT-TYPE
+   SYNTAX     INTEGER {
+                      up(1),     -- ready to pass packets
+                      down(2),   -- can't pass packets
+                      testing(3) -- in some test mode
+                }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the desired operational status of this
+         VRF."
+  ::= { mplsL3VpnVrfEntry 14 }
+
+mplsL3VpnVrfConfStorageType  OBJECT-TYPE
+   SYNTAX      StorageType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+        "The storage type for this VPN VRF entry.
+         Conceptual rows having the value 'permanent'
+         need not allow write access to any columnar
+         objects in the row."
+   REFERENCE
+        "See RFC2579."
+   DEFVAL { volatile }
+   ::= { mplsL3VpnVrfEntry 15 }
+
+-- MplsL3VpnVrfRTTable
+mplsL3VpnVrfRTTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF MplsL3VpnVrfRTEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "This table specifies per-VRF route target association.
+         Each entry identifies a connectivity policy supported
+         as part of a VPN."
+    ::= { mplsL3VpnConf 3 }
+
+mplsL3VpnVrfRTEntry OBJECT-TYPE
+    SYNTAX        MplsL3VpnVrfRTEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+       "An entry in this table is created by an LSR for
+        each route target configured for a VRF supporting
+        a MPLS L3VPN instance.  The indexing provides an
+        ordering per-VRF instance.  See [RFC4364] for a
+        complete definition of a route target."
+    INDEX  { mplsL3VpnVrfName, mplsL3VpnVrfRTIndex,
+             mplsL3VpnVrfRTType }
+    ::= { mplsL3VpnVrfRTTable 1 }
+
+MplsL3VpnVrfRTEntry ::= SEQUENCE {
+     mplsL3VpnVrfRTIndex       Unsigned32,
+     mplsL3VpnVrfRTType        MplsL3VpnRtType,
+     mplsL3VpnVrfRT            MplsL3VpnRouteDistinguisher,
+     mplsL3VpnVrfRTDescr       SnmpAdminString,
+     mplsL3VpnVrfRTRowStatus   RowStatus,
+     mplsL3VpnVrfRTStorageType StorageType
+   }
+
+mplsL3VpnVrfRTIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..4294967295)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Auxiliary index for route targets configured for a
+        particular VRF."
+   ::= { mplsL3VpnVrfRTEntry 2 }
+
+mplsL3VpnVrfRTType OBJECT-TYPE
+   SYNTAX        MplsL3VpnRtType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "The route target distribution type."
+   ::= { mplsL3VpnVrfRTEntry 3 }
+
+mplsL3VpnVrfRT OBJECT-TYPE
+   SYNTAX        MplsL3VpnRouteDistinguisher
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The route target distribution policy."
+   DEFVAL { "" }
+   ::= { mplsL3VpnVrfRTEntry 4 }
+
+mplsL3VpnVrfRTDescr OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Description of the route target."
+   DEFVAL { "" }
+   ::= { mplsL3VpnVrfRTEntry 5 }
+
+mplsL3VpnVrfRTRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  When a row in this
+        table is in active(1) state, no objects in that row
+        can be modified except mplsL3VpnVrfRTRowStatus."
+   ::= { mplsL3VpnVrfRTEntry 6 }
+
+mplsL3VpnVrfRTStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The storage type for this VPN route target (RT) entry.
+         Conceptual rows having the value 'permanent'
+         need not allow write access to any columnar
+         objects in the row."
+   REFERENCE
+        "See RFC2579."
+   DEFVAL { volatile }
+   ::= { mplsL3VpnVrfRTEntry 7 }
+
+-- VRF Security Table
+
+mplsL3VpnVrfSecTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsL3VpnVrfSecEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per MPLS L3VPN VRF Table
+        security-related counters."
+   ::= { mplsL3VpnConf 6 }
+
+mplsL3VpnVrfSecEntry OBJECT-TYPE
+   SYNTAX        MplsL3VpnVrfSecEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every VRF capable of supporting MPLS L3VPN.  Each
+        entry in this table is used to indicate security-related
+        information for each VRF entry."
+   AUGMENTS      { mplsL3VpnVrfEntry }
+      ::= { mplsL3VpnVrfSecTable 1 }
+
+MplsL3VpnVrfSecEntry ::= SEQUENCE {
+       mplsL3VpnVrfSecIllegalLblVltns     Counter32,
+       mplsL3VpnVrfSecDiscontinuityTime   TimeStamp
+}
+
+mplsL3VpnVrfSecIllegalLblVltns OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Indicates the number of illegally received
+        labels on this VPN/VRF.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsL3VpnVrfSecDiscontinuityTime."
+   ::= { mplsL3VpnVrfSecEntry 1 }
+
+mplsL3VpnVrfSecDiscontinuityTime  OBJECT-TYPE
+   SYNTAX              TimeStamp
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "The value of sysUpTime on the most recent occasion at
+        which any one or more of this entry's counters suffered
+        a discontinuity.  If no such discontinuities have
+        occurred since the last re-initialization of the local
+        management subsystem, then this object contains a zero
+        value."
+   ::= { mplsL3VpnVrfSecEntry 2 }
+
+-- VRF Performance Table
+
+mplsL3VpnVrfPerfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsL3VpnVrfPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per MPLS L3VPN VRF Table performance
+
+        information."
+   ::= { mplsL3VpnPerf 1 }
+
+mplsL3VpnVrfPerfEntry OBJECT-TYPE
+   SYNTAX        MplsL3VpnVrfPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every VRF capable of supporting MPLS L3VPN."
+   AUGMENTS      { mplsL3VpnVrfEntry }
+      ::= { mplsL3VpnVrfPerfTable 1 }
+
+MplsL3VpnVrfPerfEntry ::= SEQUENCE {
+   mplsL3VpnVrfPerfRoutesAdded       Counter32,
+   mplsL3VpnVrfPerfRoutesDeleted     Counter32,
+   mplsL3VpnVrfPerfCurrNumRoutes     Gauge32,
+   mplsL3VpnVrfPerfRoutesDropped     Counter32,
+   mplsL3VpnVrfPerfDiscTime          TimeStamp
+}
+
+mplsL3VpnVrfPerfRoutesAdded OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Indicates the number of routes added to this VPN/VRF
+        since the last discontinuity.  Discontinuities in
+        the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsL3VpnVrfPerfDiscTime."
+   ::= { mplsL3VpnVrfPerfEntry 1 }
+
+mplsL3VpnVrfPerfRoutesDeleted OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Indicates the number of routes removed from this VPN/VRF.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsL3VpnVrfPerfDiscTime."
+   ::= { mplsL3VpnVrfPerfEntry 2 }
+
+mplsL3VpnVrfPerfCurrNumRoutes     OBJECT-TYPE
+   SYNTAX        Gauge32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Indicates the number of routes currently used by this
+        VRF."
+   ::= { mplsL3VpnVrfPerfEntry 3 }
+
+mplsL3VpnVrfPerfRoutesDropped OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This counter should be incremented when the number of routes
+        contained by the specified VRF exceeds or attempts to exceed
+        the maximum allowed value as indicated by
+        mplsL3VpnVrfMaxRouteThreshold.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsL3VpnVrfPerfDiscTime."
+  ::= { mplsL3VpnVrfPerfEntry 4 }
+
+mplsL3VpnVrfPerfDiscTime  OBJECT-TYPE
+   SYNTAX              TimeStamp
+   MAX-ACCESS          read-only
+   STATUS              current
+   DESCRIPTION
+       "The value of sysUpTime on the most recent occasion at
+        which any one or more of this entry's counters suffered
+        a discontinuity.  If no such discontinuities have
+        occurred since the last re-initialization of the local
+        management subsystem, then this object contains a zero
+        value."
+  ::= { mplsL3VpnVrfPerfEntry 5 }
+
+-- VRF Routing Table
+
+mplsL3VpnVrfRteTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsL3VpnVrfRteEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per-interface MPLS L3VPN VRF Table
+        routing information.  Entries in this table define VRF routing
+        entries associated with the specified MPLS/VPN interfaces.  Note
+
+        that this table contains both BGP and Interior Gateway Protocol
+        IGP routes, as both may appear in the same VRF."
+    REFERENCE
+       "[RFC2096]"
+   ::= { mplsL3VpnRoute 1 }
+
+mplsL3VpnVrfRteEntry OBJECT-TYPE
+   SYNTAX        MplsL3VpnVrfRteEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for every route
+        present configured (either dynamically or statically) within
+        the context of a specific VRF capable of supporting MPLS/BGP
+        VPN.  The indexing provides an ordering of VRFs per-VPN
+        interface.
+
+        Implementers need to be aware that there are quite a few
+        index objects that together can exceed the size allowed
+        for an Object Identifier (OID).  So implementers must make
+        sure that OIDs of column instances in this table will have
+        no more than 128 sub-identifiers, otherwise they cannot be
+        accessed using SNMPv1, SNMPv2c, or SNMPv3."
+      INDEX  { mplsL3VpnVrfName,
+               mplsL3VpnVrfRteInetCidrDestType,
+               mplsL3VpnVrfRteInetCidrDest,
+               mplsL3VpnVrfRteInetCidrPfxLen,
+               mplsL3VpnVrfRteInetCidrPolicy,
+               mplsL3VpnVrfRteInetCidrNHopType,
+               mplsL3VpnVrfRteInetCidrNextHop
+      }
+      ::= { mplsL3VpnVrfRteTable 1 }
+
+MplsL3VpnVrfRteEntry ::= SEQUENCE {
+         mplsL3VpnVrfRteInetCidrDestType     InetAddressType,
+         mplsL3VpnVrfRteInetCidrDest         InetAddress,
+         mplsL3VpnVrfRteInetCidrPfxLen       InetAddressPrefixLength,
+         mplsL3VpnVrfRteInetCidrPolicy       OBJECT IDENTIFIER,
+         mplsL3VpnVrfRteInetCidrNHopType     InetAddressType,
+         mplsL3VpnVrfRteInetCidrNextHop      InetAddress,
+         mplsL3VpnVrfRteInetCidrIfIndex      InterfaceIndexOrZero,
+         mplsL3VpnVrfRteInetCidrType         INTEGER,
+         mplsL3VpnVrfRteInetCidrProto        IANAipRouteProtocol,
+         mplsL3VpnVrfRteInetCidrAge          Gauge32,
+         mplsL3VpnVrfRteInetCidrNextHopAS    InetAutonomousSystemNumber,
+         mplsL3VpnVrfRteInetCidrMetric1      Integer32,
+         mplsL3VpnVrfRteInetCidrMetric2      Integer32,
+         mplsL3VpnVrfRteInetCidrMetric3      Integer32,
+         mplsL3VpnVrfRteInetCidrMetric4      Integer32,
+         mplsL3VpnVrfRteInetCidrMetric5      Integer32,
+         mplsL3VpnVrfRteXCPointer            MplsIndexType,
+         mplsL3VpnVrfRteInetCidrStatus       RowStatus
+       }
+
+    mplsL3VpnVrfRteInetCidrDestType OBJECT-TYPE
+        SYNTAX     InetAddressType
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+               "The type of the mplsL3VpnVrfRteInetCidrDest address, as
+                defined in the InetAddress MIB.
+
+                Only those address types that may appear in an actual
+                routing table are allowed as values of this object."
+        REFERENCE "RFC4001"
+        ::= { mplsL3VpnVrfRteEntry 1 }
+
+    mplsL3VpnVrfRteInetCidrDest OBJECT-TYPE
+        SYNTAX     InetAddress
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+               "The destination IP address of this route.
+
+                The type of this address is determined by the value of
+                the mplsL3VpnVrfRteInetCidrDestType object.
+
+                The values for the index objects
+                mplsL3VpnVrfRteInetCidrDest and
+                mplsL3VpnVrfRteInetCidrPfxLen must be consistent.  When
+                the value of mplsL3VpnVrfRteInetCidrDest is x, then
+                the bitwise logical-AND of x with the value of the mask
+                formed from the corresponding index object
+                mplsL3VpnVrfRteInetCidrPfxLen MUST be
+                equal to x.  If not, then the index pair is not
+                consistent and an inconsistentName error must be
+                returned on SET or CREATE requests."
+        ::= { mplsL3VpnVrfRteEntry 2 }
+
+    mplsL3VpnVrfRteInetCidrPfxLen OBJECT-TYPE
+        SYNTAX     InetAddressPrefixLength (0..128)
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+               "Indicates the number of leading one bits that form the
+
+                mask to be logical-ANDed with the destination address
+                before being compared to the value in the
+                mplsL3VpnVrfRteInetCidrDest field.
+
+                The values for the index objects
+                mplsL3VpnVrfRteInetCidrDest and
+                mplsL3VpnVrfRteInetCidrPfxLen must be consistent.  When
+                the value of mplsL3VpnVrfRteInetCidrDest is x, then the
+                bitwise logical-AND of x with the value of the mask
+                formed from the corresponding index object
+                mplsL3VpnVrfRteInetCidrPfxLen MUST be
+                equal to x.  If not, then the index pair is not
+                consistent and an inconsistentName error must be
+                returned on SET or CREATE requests."
+        ::= { mplsL3VpnVrfRteEntry 3 }
+
+    mplsL3VpnVrfRteInetCidrPolicy OBJECT-TYPE
+        SYNTAX     OBJECT IDENTIFIER
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+               "This object is an opaque object without any defined
+                semantics.  Its purpose is to serve as an additional
+                index that may delineate between multiple entries to
+                the same destination.  The value { 0 0 } shall be used
+                as the default value for this object."
+        ::= { mplsL3VpnVrfRteEntry 4 }
+
+    mplsL3VpnVrfRteInetCidrNHopType OBJECT-TYPE
+        SYNTAX     InetAddressType
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+               "The type of the mplsL3VpnVrfRteInetCidrNextHop address,
+                as defined in the InetAddress MIB.
+
+                Value should be set to unknown(0) for non-remote
+                routes.
+
+                Only those address types that may appear in an actual
+                routing table are allowed as values of this object."
+        REFERENCE "RFC4001"
+        ::= { mplsL3VpnVrfRteEntry 5 }
+
+    mplsL3VpnVrfRteInetCidrNextHop OBJECT-TYPE
+        SYNTAX     InetAddress
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+               "On remote routes, the address of the next system en
+                route.  For non-remote routes, a zero-length string.
+                The type of this address is determined by the value of
+                the mplsL3VpnVrfRteInetCidrNHopType object."
+        ::= { mplsL3VpnVrfRteEntry 6 }
+
+    mplsL3VpnVrfRteInetCidrIfIndex OBJECT-TYPE
+        SYNTAX     InterfaceIndexOrZero
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "The ifIndex value that identifies the local interface
+                through which the next hop of this route should be
+                reached.  A value of 0 is valid and represents the
+                scenario where no interface is specified."
+        DEFVAL { 0 }
+        ::= { mplsL3VpnVrfRteEntry 7 }
+
+    mplsL3VpnVrfRteInetCidrType OBJECT-TYPE
+        SYNTAX     INTEGER {
+                    other    (1), -- not specified by this MIB
+                    reject   (2), -- route which discards traffic and
+                                  --   returns ICMP notification
+                    local    (3), -- local interface
+                    remote   (4), -- remote destination
+                    blackhole(5)  -- route which discards traffic
+                                  --   silently
+                 }
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "The type of route.  Note that local(3) refers to a
+                route for which the next hop is the final destination;
+                remote(4) refers to a route for which the next hop is
+                not the final destination.
+
+                Routes that do not result in traffic forwarding or
+                rejection should not be displayed even if the
+                implementation keeps them stored internally.
+
+                reject(2) refers to a route that, if matched, discards
+                the message as unreachable and returns a notification
+                (e.g., ICMP error) to the message sender.  This is used
+                in some protocols as a means of correctly aggregating
+                routes.
+
+                blackhole(5) refers to a route that, if matched,
+                discards the message silently."
+        DEFVAL { other }
+        ::= { mplsL3VpnVrfRteEntry 8 }
+
+    mplsL3VpnVrfRteInetCidrProto OBJECT-TYPE
+        SYNTAX     IANAipRouteProtocol
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+               "The routing mechanism via which this route was learned.
+                Inclusion of values for gateway routing protocols is
+                not intended to imply that hosts should support those
+                protocols."
+        ::= { mplsL3VpnVrfRteEntry 9 }
+
+    mplsL3VpnVrfRteInetCidrAge OBJECT-TYPE
+        SYNTAX     Gauge32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+               "The number of seconds since this route was last updated
+                or otherwise determined to be correct.  Note that no
+                semantics of 'too old' can be implied except through
+                knowledge of the routing protocol by which the route
+                was learned."
+        ::= { mplsL3VpnVrfRteEntry 10 }
+
+    mplsL3VpnVrfRteInetCidrNextHopAS OBJECT-TYPE
+        SYNTAX     InetAutonomousSystemNumber
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "The Autonomous System Number of the next hop.  The
+                semantics of this object are determined by the
+                routing protocol specified in the route's
+                mplsL3VpnVrfRteInetCidrProto value.  When this
+                object is unknown or not relevant, its value should
+                be set to zero."
+        DEFVAL { 0 }
+        ::= { mplsL3VpnVrfRteEntry 11 }
+
+    mplsL3VpnVrfRteInetCidrMetric1 OBJECT-TYPE
+        SYNTAX     Integer32 (-1 | 0..2147483647)
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "The primary routing metric for this route.  The
+                semantics of this metric are determined by the
+
+                routing protocol specified in the route's
+                mplsL3VpnVrfRteInetCidrProto value.  If this
+                metric is not used, its value should be set to
+                -1."
+        DEFVAL { -1 }
+        ::= { mplsL3VpnVrfRteEntry 12 }
+
+    mplsL3VpnVrfRteInetCidrMetric2 OBJECT-TYPE
+        SYNTAX     Integer32 (-1 | 0..2147483647)
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "An alternate routing metric for this route.  The
+                semantics of this metric are determined by the routing
+                protocol specified in the route's
+                mplsL3VpnVrfRteInetCidrProto
+                value.  If this metric is not used, its value should be
+                set to -1."
+        DEFVAL { -1 }
+        ::= { mplsL3VpnVrfRteEntry 13 }
+
+    mplsL3VpnVrfRteInetCidrMetric3 OBJECT-TYPE
+        SYNTAX     Integer32 (-1 | 0..2147483647)
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "An alternate routing metric for this route.  The
+                semantics of this metric are determined by the routing
+                protocol specified in the route's
+                mplsL3VpnVrfRteInetCidrProto
+                value.  If this metric is not used, its value should be
+                set to -1."
+        DEFVAL { -1 }
+        ::= { mplsL3VpnVrfRteEntry 14 }
+
+    mplsL3VpnVrfRteInetCidrMetric4 OBJECT-TYPE
+        SYNTAX     Integer32 (-1 | 0..2147483647)
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "An alternate routing metric for this route.  The
+                semantics of this metric are determined by the routing
+                protocol specified in the route's
+                mplsL3VpnVrfRteInetCidrProto value.  If this metric
+                is not used, its value should be set to -1."
+        DEFVAL { -1 }
+        ::= { mplsL3VpnVrfRteEntry 15 }
+
+    mplsL3VpnVrfRteInetCidrMetric5 OBJECT-TYPE
+        SYNTAX     Integer32 (-1 | 0..2147483647)
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "An alternate routing metric for this route.  The
+                semantics of this metric are determined by the routing
+                protocol specified in the route's
+                mplsL3VpnVrfRteInetCidrProto value.  If this metric is
+                not used, its value should be set to -1."
+        DEFVAL { -1 }
+        ::= { mplsL3VpnVrfRteEntry 16 }
+
+   mplsL3VpnVrfRteXCPointer  OBJECT-TYPE
+      SYNTAX        MplsIndexType
+      MAX-ACCESS    read-create
+      STATUS        current
+      DESCRIPTION
+        "Index into mplsXCTable that identifies which cross-
+        connect entry is associated with this VRF route entry
+        by containing the mplsXCIndex of that cross-connect entry.
+        The string containing the single-octet 0x00 indicates that
+        a label stack is not associated with this route entry.  This
+        can be the case because the label bindings have not yet
+        been established, or because some change in the agent has
+        removed them.
+
+        When the label stack associated with this VRF route is created,
+        it MUST establish the associated cross-connect
+        entry in the mplsXCTable and then set that index to the value
+        of this object.  Changes to the cross-connect object in the
+        mplsXCTable MUST automatically be reflected in the value of
+        this object.  If this object represents a static routing entry,
+        then the manager must ensure that this entry is maintained
+        consistently in the corresponding mplsXCTable as well."
+      REFERENCE
+       "RFC 3813 - Multiprotocol Label Switching (MPLS) Label Switching
+        Router (LSR) Management Information base (MIB), C. Srinivasan,
+        A. Vishwanathan, and T. Nadeau, June 2004"
+       ::= { mplsL3VpnVrfRteEntry 17 }
+
+    mplsL3VpnVrfRteInetCidrStatus OBJECT-TYPE
+        SYNTAX     RowStatus
+        MAX-ACCESS read-create
+        STATUS     current
+        DESCRIPTION
+               "The row status variable, used according to row
+                installation and removal conventions.
+
+                A row entry cannot be modified when the status is
+                marked as active(1)."
+        ::= { mplsL3VpnVrfRteEntry 18 }
+
+-- MPLS L3VPN Notifications
+mplsL3VpnVrfUp NOTIFICATION-TYPE
+   OBJECTS     { mplsL3VpnIfConfRowStatus,
+                 mplsL3VpnVrfOperStatus
+               }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when:
+        a. No interface is associated with this VRF, and the first
+           (and only first) interface associated with it has its
+           ifOperStatus change to up(1).
+
+        b. One interface is associated with this VRF, and
+           the ifOperStatus of this interface changes to up(1).
+
+        c. Multiple interfaces are associated with this VRF, and the
+           ifOperStatus of all interfaces is down(2), and the first
+           of those interfaces has its ifOperStatus change to up(1)."
+   ::= { mplsL3VpnNotifications 1 }
+
+mplsL3VpnVrfDown NOTIFICATION-TYPE
+   OBJECTS     { mplsL3VpnIfConfRowStatus,
+                 mplsL3VpnVrfOperStatus
+               }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when:
+        a. One interface is associated with this VRF, and
+           the ifOperStatus of this interface changes from up(1)
+           to down(2).
+
+        b. Multiple interfaces are associated with this VRF, and
+           the ifOperStatus of all except one of these interfaces is
+           equal to up(1), and the ifOperStatus of that interface
+           changes from up(1) to down(2).
+
+        c. The last interface with ifOperStatus equal to up(1)
+           is disassociated from a VRF."
+   ::= { mplsL3VpnNotifications 2 }
+
+mplsL3VpnVrfRouteMidThreshExceeded NOTIFICATION-TYPE
+   OBJECTS     { mplsL3VpnVrfPerfCurrNumRoutes,
+                 mplsL3VpnVrfConfMidRteThresh
+
+               }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the number of routes
+        contained by the specified VRF exceeds the value indicated by
+        mplsL3VpnVrfMidRouteThreshold.  A single notification MUST be
+        generated when this threshold is exceeded, and no other
+        notifications of this type should be issued until the value
+        of mplsL3VpnVrfPerfCurrNumRoutes has fallen below that of
+        mplsL3VpnVrfConfMidRteThresh."
+   ::= { mplsL3VpnNotifications 3 }
+
+mplsL3VpnVrfNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE
+   OBJECTS     { mplsL3VpnVrfPerfCurrNumRoutes,
+                 mplsL3VpnVrfConfHighRteThresh
+               }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the number of routes
+        contained by the specified VRF exceeds or attempts to exceed
+        the maximum allowed value as indicated by
+        mplsL3VpnVrfMaxRouteThreshold.  In cases where
+        mplsL3VpnVrfConfHighRteThresh is set to the same value
+        as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
+        need not be exceeded; rather, just reached for this notification
+        to be issued.
+
+        Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval
+        at which the this notification will be reissued after the
+        maximum value has been exceeded (or reached if
+        mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
+        equal) and the initial notification has been issued.  This value
+        is intended to prevent continuous generation of notifications by
+        an agent in the event that routes are continually added to a VRF
+        after it has reached its maximum value.  The default value is 0
+        minutes.  If this value is set to 0, the agent should only issue
+        a single notification at the time that the maximum threshold has
+        been reached, and should not issue any more notifications until
+        the value of routes has fallen below the configured threshold
+        value."
+   ::= { mplsL3VpnNotifications 4 }
+
+mplsL3VpnNumVrfSecIllglLblThrshExcd NOTIFICATION-TYPE
+   OBJECTS     { mplsL3VpnVrfSecIllegalLblVltns }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the number of illegal
+        label violations on a VRF as indicated by
+
+        mplsL3VpnVrfSecIllegalLblVltns has exceeded
+        mplsL3VpnIllLblRcvThrsh.  The threshold is not
+        included in the varbind here because the value of
+        mplsL3VpnVrfSecIllegalLblVltns should be one greater than
+        the threshold at the time this notification is issued."
+   ::= { mplsL3VpnNotifications 5 }
+
+mplsL3VpnNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE
+   OBJECTS     { mplsL3VpnVrfPerfCurrNumRoutes,
+                 mplsL3VpnVrfConfHighRteThresh
+               }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated only after the number of routes
+        contained by the specified VRF exceeds or attempts to exceed
+        the maximum allowed value as indicated by
+        mplsVrfMaxRouteThreshold, and then falls below this value.  The
+        emission of this notification informs the operator that the
+        error condition has been cleared without the operator having to
+        query the device.
+
+        Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at
+        which the mplsNumVrfRouteMaxThreshExceeded notification will
+        be reissued after the maximum value has been exceeded (or
+        reached if mplsL3VpnVrfConfMaxRoutes and
+        mplsL3VpnVrfConfHighRteThresh are equal) and the initial
+        notification has been issued.  Therefore,
+        the generation of this notification should also be emitted with
+        this same frequency (assuming that the error condition is
+        cleared).  Specifically, if the error condition is reached and
+        cleared several times during the period of time specified in
+        mplsL3VpnVrfConfRteMxThrshTime, only a single notification will
+        be issued to indicate the first instance of the error condition
+        as well as the first time the error condition is cleared.
+        This behavior is intended to prevent continuous generation of
+        notifications by an agent in the event that routes are
+        continually added and removed to/from a VRF after it has
+        reached its maximum value.  The default value is 0.  If this
+        value is set to 0, the agent should issue a notification
+        whenever the maximum threshold has been cleared."
+   ::= { mplsL3VpnNotifications 6 }
+
+-- Conformance Statement
+mplsL3VpnGroups
+      OBJECT IDENTIFIER ::= { mplsL3VpnConformance 1 }
+
+mplsL3VpnCompliances
+
+      OBJECT IDENTIFIER ::= { mplsL3VpnConformance 2 }
+
+-- Module Compliance
+
+mplsL3VpnModuleFullCompliance MODULE-COMPLIANCE
+      STATUS current
+      DESCRIPTION
+          "Compliance statement for agents that provide full support
+           for the MPLS-L3VPN-STD-MIB"
+      MODULE -- this module
+         MANDATORY-GROUPS    { mplsL3VpnScalarGroup,
+                               mplsL3VpnVrfGroup,
+                               mplsL3VpnIfGroup,
+                               mplsL3VpnPerfGroup,
+                               mplsL3VpnVrfRteGroup,
+                               mplsL3VpnVrfRTGroup,
+                               mplsL3VpnSecGroup,
+                               mplsL3VpnNotificationGroup
+                             }
+
+   GROUP       mplsL3VpnPerfRouteGroup
+   DESCRIPTION "This group is only mandatory for LSRs that
+                support tracking the number of routes attempted
+                to be added to VRFs."
+
+   OBJECT       mplsL3VpnIfConfRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is
+                not required."
+
+   OBJECT       mplsL3VpnVrfConfRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is
+                not required."
+   OBJECT       mplsL3VpnVrfRTRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is
+                not required."
+   ::= { mplsL3VpnCompliances 1 }
+
+--
+-- ReadOnly Compliance
+--
+
+mplsL3VpnModuleReadOnlyCompliance MODULE-COMPLIANCE
+      STATUS current
+      DESCRIPTION "Compliance requirement for implementations that only
+                   provide read-only support for MPLS-L3VPN-STD-MIB.
+                   Such devices can then be monitored but cannot be
+                   configured using this MIB module."
+
+      MODULE -- this module
+         MANDATORY-GROUPS    { mplsL3VpnScalarGroup,
+                               mplsL3VpnVrfGroup,
+                               mplsL3VpnIfGroup,
+                               mplsL3VpnPerfGroup,
+                               mplsL3VpnVrfRteGroup,
+                               mplsL3VpnVrfRTGroup,
+                               mplsL3VpnSecGroup,
+                               mplsL3VpnNotificationGroup
+                             }
+
+   GROUP       mplsL3VpnPerfRouteGroup
+   DESCRIPTION "This group is only mandatory for LSRs that
+                support tracking the number of routes attempted to
+                be added to VRFs."
+
+   OBJECT       mplsL3VpnIfConfRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION  "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfConfRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION  "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRTRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION  "Write access is not required."
+
+   OBJECT       mplsL3VpnIfVpnClassification
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnIfVpnRouteDistProtocol
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnIfConfStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfVpnId
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfDescription
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRD
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfConfMidRteThresh
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfConfHighRteThresh
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfConfMaxRoutes
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfConfStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRT
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRTDescr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRTStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrNextHopAS
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrMetric1
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrMetric2
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrMetric3
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrMetric4
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrMetric5
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteXCPointer
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsL3VpnVrfRteInetCidrStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION  "Write access is not required."
+   ::= { mplsL3VpnCompliances 2 }
+
+   -- Units of conformance.
+   mplsL3VpnScalarGroup OBJECT-GROUP
+      OBJECTS { mplsL3VpnConfiguredVrfs,
+                mplsL3VpnActiveVrfs,
+                mplsL3VpnConnectedInterfaces,
+                mplsL3VpnNotificationEnable,
+                mplsL3VpnVrfConfMaxPossRts,
+                mplsL3VpnVrfConfRteMxThrshTime,
+                mplsL3VpnIllLblRcvThrsh
+             }
+      STATUS  current
+      DESCRIPTION
+             "Collection of scalar objects required for MPLS VPN
+              management."
+      ::= { mplsL3VpnGroups 1 }
+
+   mplsL3VpnVrfGroup OBJECT-GROUP
+      OBJECTS { mplsL3VpnVrfVpnId,
+                mplsL3VpnVrfDescription,
+                mplsL3VpnVrfRD,
+                mplsL3VpnVrfCreationTime,
+                mplsL3VpnVrfOperStatus,
+                mplsL3VpnVrfActiveInterfaces,
+                mplsL3VpnVrfAssociatedInterfaces,
+                mplsL3VpnVrfConfMidRteThresh,
+                mplsL3VpnVrfConfHighRteThresh,
+                mplsL3VpnVrfConfMaxRoutes,
+                mplsL3VpnVrfConfLastChanged,
+                mplsL3VpnVrfConfRowStatus,
+                mplsL3VpnVrfConfAdminStatus,
+                mplsL3VpnVrfConfStorageType
+       }
+      STATUS  current
+      DESCRIPTION
+             "Collection of objects needed for MPLS VPN VRF
+              management."
+      ::= { mplsL3VpnGroups 2 }
+
+   mplsL3VpnIfGroup OBJECT-GROUP
+        OBJECTS { mplsL3VpnIfVpnClassification,
+                  mplsL3VpnIfVpnRouteDistProtocol,
+                  mplsL3VpnIfConfStorageType,
+                  mplsL3VpnIfConfRowStatus
+           }
+      STATUS  current
+      DESCRIPTION
+             "Collection of objects needed for MPLS VPN interface
+              management."
+      ::= { mplsL3VpnGroups 3 }
+
+   mplsL3VpnPerfGroup OBJECT-GROUP
+      OBJECTS { mplsL3VpnVrfPerfRoutesAdded,
+                mplsL3VpnVrfPerfRoutesDeleted,
+                mplsL3VpnVrfPerfCurrNumRoutes
+             }
+      STATUS  current
+      DESCRIPTION
+             "Collection of objects needed for MPLS VPN
+              performance information."
+      ::= { mplsL3VpnGroups 4 }
+
+   mplsL3VpnPerfRouteGroup OBJECT-GROUP
+      OBJECTS { mplsL3VpnVrfPerfRoutesDropped,
+                mplsL3VpnVrfPerfDiscTime
+             }
+      STATUS  current
+      DESCRIPTION
+             "Collection of objects needed to track MPLS VPN
+              routing table dropped routes."
+      ::= { mplsL3VpnGroups 5 }
+
+   mplsL3VpnSecGroup OBJECT-GROUP
+      OBJECTS { mplsL3VpnVrfSecIllegalLblVltns,
+                mplsL3VpnVrfSecDiscontinuityTime }
+      STATUS  current
+      DESCRIPTION
+             "Collection of objects needed for MPLS VPN
+              security-related information."
+      ::= { mplsL3VpnGroups 7 }
+
+   mplsL3VpnVrfRteGroup OBJECT-GROUP
+      OBJECTS {
+            mplsL3VpnVrfRteInetCidrIfIndex,
+            mplsL3VpnVrfRteInetCidrType,
+            mplsL3VpnVrfRteInetCidrProto,
+            mplsL3VpnVrfRteInetCidrAge,
+            mplsL3VpnVrfRteInetCidrNextHopAS,
+            mplsL3VpnVrfRteInetCidrMetric1,
+            mplsL3VpnVrfRteInetCidrMetric2,
+            mplsL3VpnVrfRteInetCidrMetric3,
+            mplsL3VpnVrfRteInetCidrMetric4,
+            mplsL3VpnVrfRteInetCidrMetric5,
+            mplsL3VpnVrfRteXCPointer,
+            mplsL3VpnVrfRteInetCidrStatus
+       }
+      STATUS  current
+      DESCRIPTION
+             "Objects required for VRF route table management."
+   ::= { mplsL3VpnGroups 8 }
+
+   mplsL3VpnVrfRTGroup OBJECT-GROUP
+
+      OBJECTS { mplsL3VpnVrfRTDescr,
+                mplsL3VpnVrfRT,
+                mplsL3VpnVrfRTRowStatus,
+                mplsL3VpnVrfRTStorageType
+              }
+      STATUS  current
+      DESCRIPTION
+             "Objects required for VRF route target management."
+   ::= { mplsL3VpnGroups 9 }
+
+   mplsL3VpnNotificationGroup NOTIFICATION-GROUP
+       NOTIFICATIONS { mplsL3VpnVrfUp,
+                       mplsL3VpnVrfDown,
+                       mplsL3VpnVrfRouteMidThreshExceeded,
+                       mplsL3VpnVrfNumVrfRouteMaxThreshExceeded,
+                       mplsL3VpnNumVrfSecIllglLblThrshExcd,
+                       mplsL3VpnNumVrfRouteMaxThreshCleared
+                     }
+      STATUS  current
+      DESCRIPTION
+             "Objects required for MPLS VPN notifications."
+   ::= { mplsL3VpnGroups 10 }
+END
diff --git a/snmp_builder/mibs/MPLS-LC-ATM-STD-MIB.mib b/snmp_builder/mibs/MPLS-LC-ATM-STD-MIB.mib
new file mode 100644
index 0000000..6d4f2e7
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LC-ATM-STD-MIB.mib
@@ -0,0 +1,336 @@
+MPLS-LC-ATM-STD-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE
+      FROM SNMPv2-SMI
+   MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF
+   RowStatus, StorageType, TruthValue
+      FROM SNMPv2-TC
+   AtmVpIdentifier
+      FROM ATM-TC-MIB
+   mplsStdMIB, MplsAtmVcIdentifier
+      FROM MPLS-TC-STD-MIB
+   mplsInterfaceIndex
+      FROM MPLS-LSR-STD-MIB
+   ;
+
+mplsLcAtmStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200601120000Z"  -- 12 January 2006
+   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
+   CONTACT-INFO
+       "        Thomas D. Nadeau
+        Postal: Cisco Systems, Inc.
+                250 Apollo Drive
+                Chelmsford, MA 01824
+        Tel:    +1-978-244-3051
+        Email:  tnadeau@cisco.com
+
+                Subrahmanya Hegde
+        Postal: Cisco Systems, Inc.
+                225 East Tazman Drive
+        Tel:    +1-408-525-6562
+        Email:  subrah@cisco.com
+        General comments should be sent to mpls@uu.net
+       "
+   DESCRIPTION
+       "This MIB module contains managed object definitions for
+        MPLS Label-Controlled ATM interfaces as defined in
+        [RFC3035].
+
+        Copyright (C) The Internet Society (2006).  This
+        version of this MIB module is part of RFC 4368; see
+        the RFC itself for full legal notices."
+
+   -- Revision history.
+   REVISION
+        "200601120000Z"  -- 12 January 2006
+   DESCRIPTION
+       "Initial revision, published as part of RFC 4368."
+   ::= { mplsStdMIB 9 }
+
+-- Top level components of this MIB module.
+
+-- Tables, Scalars, Notifications, Conformance
+
+mplsLcAtmStdNotifications OBJECT IDENTIFIER ::= { mplsLcAtmStdMIB 0 }
+
+mplsLcAtmStdObjects       OBJECT IDENTIFIER ::= { mplsLcAtmStdMIB 1 }
+
+mplsLcAtmStdConformance   OBJECT IDENTIFIER ::= { mplsLcAtmStdMIB 2 }
+
+-- MPLS LC-ATM Interface Configuration Table.
+mplsLcAtmStdInterfaceConfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsLcAtmStdInterfaceConfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per-interface MPLS LC-ATM
+        capability and associated information.  In particular,
+        this table sparsely extends the MPLS-LSR-STD-MIB's
+        mplsInterfaceConfTable."
+   ::= { mplsLcAtmStdObjects 1 }
+
+mplsLcAtmStdInterfaceConfEntry OBJECT-TYPE
+   SYNTAX        MplsLcAtmStdInterfaceConfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every interface capable of supporting MPLS LC-ATM.
+        Each entry in this table will exist only if a
+        corresponding entry in ifTable and mplsInterfaceConfTable
+        exists.  If the associated entries in ifTable and
+        mplsInterfaceConfTable are deleted, the corresponding
+        entry in this table must also be deleted shortly
+        thereafter."
+   INDEX       { mplsInterfaceIndex }
+      ::= { mplsLcAtmStdInterfaceConfTable 1 }
+
+MplsLcAtmStdInterfaceConfEntry ::= SEQUENCE {
+   mplsLcAtmStdCtrlVpi                 AtmVpIdentifier,
+   mplsLcAtmStdCtrlVci                 MplsAtmVcIdentifier,
+   mplsLcAtmStdUnlabTrafVpi            AtmVpIdentifier,
+   mplsLcAtmStdUnlabTrafVci            MplsAtmVcIdentifier,
+   mplsLcAtmStdVcMerge                 TruthValue,
+   mplsLcAtmVcDirectlyConnected        TruthValue,
+   mplsLcAtmLcAtmVPI                   AtmVpIdentifier,
+   mplsLcAtmStdIfConfRowStatus         RowStatus,
+   mplsLcAtmStdIfConfStorageType       StorageType
+}
+
+mplsLcAtmStdCtrlVpi OBJECT-TYPE
+   SYNTAX        AtmVpIdentifier
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the VPI value over which this
+        LSR is willing to accept control traffic on
+        this interface."
+   ::= { mplsLcAtmStdInterfaceConfEntry 1 }
+
+mplsLcAtmStdCtrlVci OBJECT-TYPE
+   SYNTAX        MplsAtmVcIdentifier
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the VCI value over which this
+        LSR is willing to accept control traffic
+        on this interface."
+   ::= { mplsLcAtmStdInterfaceConfEntry 2 }
+
+mplsLcAtmStdUnlabTrafVpi OBJECT-TYPE
+   SYNTAX        AtmVpIdentifier
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the VPI value over which this
+        LSR is willing to accept unlabeled traffic
+        on this interface."
+   ::= { mplsLcAtmStdInterfaceConfEntry 3 }
+
+mplsLcAtmStdUnlabTrafVci OBJECT-TYPE
+   SYNTAX        MplsAtmVcIdentifier
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the VCI value over which this
+        LSR is willing to accept unlabeled traffic
+        on this interface."
+   ::= { mplsLcAtmStdInterfaceConfEntry 4 }
+
+mplsLcAtmStdVcMerge OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "If set to true(1), indicates that this interface
+        is capable of ATM VC merge; otherwise, it MUST
+        be set to false(2)."
+   DEFVAL     { false }
+   ::= { mplsLcAtmStdInterfaceConfEntry 5 }
+
+mplsLcAtmVcDirectlyConnected OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This value indicates whether an LC-ATM is directly
+      or indirectly (by means of a VP) connected.  If set to
+      true(1), indicates that this interface is directly
+      connected LC-ATM; otherwise, it MUST be set to
+      false(2).  Note that although it can be intimated
+      from RFC 3057 that multiple VPs may be used,
+      in practice only a single one is used, and therefore
+      the authors of this MIB module have chosen to model
+      it as such."
+   DEFVAL     { true }
+   ::= { mplsLcAtmStdInterfaceConfEntry 6 }
+
+mplsLcAtmLcAtmVPI OBJECT-TYPE
+   SYNTAX        AtmVpIdentifier
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "This is the VPI value used for indirectly
+      connected LC-ATM interfaces.  For these
+      interfaces, the VPI field is not
+      available to MPLS, and the label MUST be
+      encoded entirely within the VCI field
+      (see [RFC3035]).  If the interface is directly
+      connected, this value MUST be set to zero."
+   DEFVAL  { 0 }
+   ::= { mplsLcAtmStdInterfaceConfEntry 7 }
+
+mplsLcAtmStdIfConfRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is used to create and
+        delete entries in this table.  When configuring
+        entries in this table, the corresponding
+        ifEntry and mplsInterfaceConfEntry
+        MUST exist beforehand.  If a manager attempts to
+        create an entry for a corresponding
+        mplsInterfaceConfEntry that does not support LC-ATM,
+        the agent MUST return an inconsistentValue error.
+        If this table is implemented read-only, then the
+        agent must set this object to active(1) when this
+        row is made active.  If this table is implemented
+        writable, then an agent MUST not allow modification
+        to its objects once this value is set to active(1),
+        except to mplsLcAtmStdIfConfRowStatus and
+        mplsLcAtmStdIfConfStorageType."
+   ::= { mplsLcAtmStdInterfaceConfEntry 8 }
+
+ mplsLcAtmStdIfConfStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+   DEFVAL { nonVolatile }
+   ::= { mplsLcAtmStdInterfaceConfEntry 9 }
+
+-- End of mplsLcAtmStdInterfaceConfTable
+
+-- Module compliance.
+
+mplsLcAtmStdCompliances
+   OBJECT IDENTIFIER ::= { mplsLcAtmStdConformance 1 }
+
+mplsLcAtmStdGroups
+   OBJECT IDENTIFIER ::= { mplsLcAtmStdConformance 2 }
+
+-- Compliance requirement for full compliance
+
+mplsLcAtmStdModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that provide
+        full support for MPLS-LC-ATM-STD-MIB.  Such
+        devices can be monitored and also be configured
+        using this MIB module."
+
+   MODULE -- this module
+      MANDATORY-GROUPS {
+         mplsLcAtmStdIfGroup
+      }
+
+      OBJECT       mplsLcAtmStdIfConfRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is
+                   not required."
+   ::= { mplsLcAtmStdCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+
+mplsLcAtmStdModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance requirement for implementations that only
+        provide read-only support for MPLS-LC-ATM-STD-MIB.
+        Such devices can be monitored but cannot be configured
+        using this MIB module.
+       "
+   MODULE -- this module
+      MANDATORY-GROUPS {
+         mplsLcAtmStdIfGroup
+      }
+
+      -- mplsLcAtmStdInterfaceConfTable
+
+      OBJECT      mplsLcAtmStdCtrlVpi
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmStdCtrlVci
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmStdUnlabTrafVpi
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmStdUnlabTrafVci
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmStdVcMerge
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmStdIfConfRowStatus
+      SYNTAX       RowStatus { active(1) }
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsLcAtmVcDirectlyConnected
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmLcAtmVPI
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcAtmStdIfConfStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+   ::= { mplsLcAtmStdCompliances 2 }
+
+-- Units of conformance.
+
+mplsLcAtmStdIfGroup OBJECT-GROUP
+   OBJECTS {
+             mplsLcAtmStdCtrlVpi,
+             mplsLcAtmStdCtrlVci,
+             mplsLcAtmStdUnlabTrafVpi,
+             mplsLcAtmStdUnlabTrafVci,
+             mplsLcAtmStdVcMerge,
+             mplsLcAtmVcDirectlyConnected,
+             mplsLcAtmLcAtmVPI,
+             mplsLcAtmStdIfConfRowStatus,
+             mplsLcAtmStdIfConfStorageType
+    }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for MPLS LC-ATM
+
+           interface configuration."
+   ::= { mplsLcAtmStdGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-LC-FR-STD-MIB.mib b/snmp_builder/mibs/MPLS-LC-FR-STD-MIB.mib
new file mode 100644
index 0000000..07bd0de
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LC-FR-STD-MIB.mib
@@ -0,0 +1,263 @@
+MPLS-LC-FR-STD-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE
+      FROM SNMPv2-SMI
+   MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF
+   RowStatus, StorageType
+      FROM SNMPv2-TC
+   mplsInterfaceIndex
+      FROM MPLS-LSR-STD-MIB
+   DLCI
+      FROM FRAME-RELAY-DTE-MIB
+   mplsStdMIB
+      FROM MPLS-TC-STD-MIB
+   ;
+mplsLcFrStdMIB MODULE-IDENTITY
+
+   LAST-UPDATED "200601120000Z"  -- 12 January 2006
+   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
+   CONTACT-INFO
+       "        Thomas D. Nadeau
+                Cisco Systems, Inc.
+        Email:  tnadeau@cisco.com
+
+                Subrahmanya Hegde
+        Email:  subrah@cisco.com
+
+        General comments should be sent to mpls@uu.net
+       "
+   DESCRIPTION
+       "This MIB module contains managed object definitions for
+        MPLS Label-Controlled Frame-Relay interfaces as defined
+        in (RFC3034).
+
+        Copyright (C) The Internet Society (2006).  This
+        version of this MIB module is part of RFC 4368; see
+        the RFC itself for full legal notices."
+
+   -- Revision history.
+   REVISION
+        "200601120000Z"  -- 12 January 2006
+   DESCRIPTION
+       "Initial revision, published as part of RFC 4368."
+   ::= { mplsStdMIB 10 }
+
+-- Top level components of this MIB module.
+-- Tables, Scalars, Notifications, Conformance
+
+mplsLcFrStdNotifications OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 0 }
+mplsLcFrStdObjects       OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 1 }
+mplsLcFrStdConformance   OBJECT IDENTIFIER ::= { mplsLcFrStdMIB 2 }
+
+-- MPLS LC-FR Interface Configuration Table.
+mplsLcFrStdInterfaceConfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsLcFrStdInterfaceConfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per-interface MPLS LC-FR
+        capability and associated information.  In particular,
+        this table sparsely extends the MPLS-LSR-STD-MIB's
+        mplsInterfaceConfTable."
+   ::= { mplsLcFrStdObjects 1 }
+
+mplsLcFrStdInterfaceConfEntry OBJECT-TYPE
+   SYNTAX        MplsLcFrStdInterfaceConfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every interface capable of supporting MPLS LC-FR.
+        Each entry in this table will exist only if a
+        corresponding entry in ifTable and mplsInterfaceConfTable
+        exists.  If the associated entries in ifTable and
+        mplsInterfaceConfTable are deleted, the corresponding
+        entry in this table must also be deleted shortly
+        thereafter."
+   INDEX       { mplsInterfaceIndex }
+      ::= { mplsLcFrStdInterfaceConfTable 1 }
+
+MplsLcFrStdInterfaceConfEntry ::= SEQUENCE {
+   mplsLcFrStdTrafficMinDlci           DLCI,
+   mplsLcFrStdTrafficMaxDlci           DLCI,
+   mplsLcFrStdCtrlMinDlci              DLCI,
+   mplsLcFrStdCtrlMaxDlci              DLCI,
+   mplsLcFrStdInterfaceConfRowStatus   RowStatus,
+   mplsLcFrStdInterfaceConfStorageType StorageType
+}
+
+mplsLcFrStdTrafficMinDlci OBJECT-TYPE
+   SYNTAX        DLCI
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the minimum DLCI value over which this
+        LSR is willing to accept traffic on this
+        interface."
+   ::= { mplsLcFrStdInterfaceConfEntry 1 }
+
+mplsLcFrStdTrafficMaxDlci OBJECT-TYPE
+   SYNTAX        DLCI
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the max DLCI value over which this
+        LSR is willing to accept traffic on this
+        interface."
+   ::= { mplsLcFrStdInterfaceConfEntry 2 }
+
+mplsLcFrStdCtrlMinDlci OBJECT-TYPE
+   SYNTAX        DLCI
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the min DLCI value over which this
+        LSR is willing to accept control traffic
+        on this interface."
+   ::= { mplsLcFrStdInterfaceConfEntry 3 }
+
+mplsLcFrStdCtrlMaxDlci OBJECT-TYPE
+   SYNTAX        DLCI
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This is the max DLCI value over which this
+        LSR is willing to accept control traffic
+        on this interface."
+   ::= { mplsLcFrStdInterfaceConfEntry 4 }
+
+mplsLcFrStdInterfaceConfRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is used to create and
+        delete entries in this table.  When configuring
+        entries in this table, the corresponding ifEntry and
+        mplsInterfaceConfEntry MUST exist beforehand.  If a manager
+        attempts to create an entry for a corresponding
+        mplsInterfaceConfEntry that does not support LC-FR,
+        the agent MUST return an inconsistentValue error.
+        If this table is implemented read-only, then the
+        agent must set this object to active(1) when this
+        row is made active.  If this table is implemented
+        writable, then an agent MUST not allow modification
+        to its objects once this value is set to active(1),
+        except to mplsLcFrStdInterfaceConfRowStatus and
+        mplsLcFrStdInterfaceConfStorageType."
+   ::= { mplsLcFrStdInterfaceConfEntry 5 }
+
+ mplsLcFrStdInterfaceConfStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+   DEFVAL { nonVolatile }
+   ::= { mplsLcFrStdInterfaceConfEntry 6 }
+
+-- End of mplsLcFrStdInterfaceConfTable
+
+-- Module compliance.
+
+mplsLcFrStdCompliances
+   OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 1 }
+
+mplsLcFrStdGroups
+   OBJECT IDENTIFIER ::= { mplsLcFrStdConformance 2 }
+
+-- Compliance requirement for full compliance
+
+mplsLcFrStdModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that provide
+        full support for MPLS-LC-FR-STD-MIB.  Such
+        devices can be monitored and also be configured
+        using this MIB module."
+
+   MODULE -- this module
+      MANDATORY-GROUPS {
+         mplsLcFrStdIfGroup
+      }
+
+      OBJECT       mplsLcFrStdInterfaceConfRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is
+                   not required."
+   ::= { mplsLcFrStdCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+
+mplsLcFrStdModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance requirement for implementations that only
+        provide read-only support for MPLS-LC-FR-STD-MIB.
+        Such devices can be monitored but cannot be configured
+        using this MIB module.
+       "
+
+   MODULE -- this module
+      MANDATORY-GROUPS {
+         mplsLcFrStdIfGroup
+      }
+
+      -- mplsLcFrStdInterfaceConfTable
+
+      OBJECT     mplsLcFrStdTrafficMinDlci
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT     mplsLcFrStdTrafficMaxDlci
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcFrStdCtrlMinDlci
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsLcFrStdCtrlMaxDlci
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT       mplsLcFrStdInterfaceConfRowStatus
+      SYNTAX       RowStatus { active(1) }
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsLcFrStdInterfaceConfStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+   ::= { mplsLcFrStdCompliances 2 }
+
+-- Units of conformance.
+
+mplsLcFrStdIfGroup OBJECT-GROUP
+   OBJECTS {
+        mplsLcFrStdTrafficMinDlci,
+        mplsLcFrStdTrafficMaxDlci,
+        mplsLcFrStdCtrlMinDlci,
+        mplsLcFrStdCtrlMaxDlci,
+        mplsLcFrStdInterfaceConfRowStatus,
+        mplsLcFrStdInterfaceConfStorageType
+    }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for MPLS LC-FR
+           interface configuration."
+   ::= { mplsLcFrStdGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-LDP-ATM-STD-MIB.mib b/snmp_builder/mibs/MPLS-LDP-ATM-STD-MIB.mib
new file mode 100644
index 0000000..10140a1
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LDP-ATM-STD-MIB.mib
@@ -0,0 +1,757 @@
+MPLS-LDP-ATM-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE, MODULE-IDENTITY,
+    Unsigned32
+        FROM SNMPv2-SMI                                 --  [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                                --  [RFC2580]
+    RowStatus,
+    StorageType
+        FROM SNMPv2-TC                                  --  [RFC2579]
+
+    InterfaceIndexOrZero
+        FROM IF-MIB                                     --  [RFC2020]
+
+    AtmVpIdentifier
+        FROM ATM-TC-MIB                                 --  [RFC2514]
+
+    mplsStdMIB,
+    MplsAtmVcIdentifier
+        FROM MPLS-TC-STD-MIB                            --  [RFC3811]
+
+    mplsLdpEntityLdpId,
+    mplsLdpEntityIndex,
+    mplsLdpPeerLdpId
+        FROM MPLS-LDP-STD-MIB                           --  [RFC3813]
+
+    ;
+
+mplsLdpAtmStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 3, 2004
+
+    ORGANIZATION "Multiprotocol Label Switching (mpls)
+                  Working Group"
+    CONTACT-INFO
+        "Joan Cucchiara (jcucchiara@mindspring.com)
+         Marconi Communications, Inc.
+
+         Hans Sjostrand (hans@ipunplugged.com)
+         ipUnplugged
+
+         James V. Luciani (james_luciani@mindspring.com)
+         Marconi Communications, Inc.
+
+         Working Group Chairs:
+         George Swallow,   email: swallow@cisco.com
+         Loa Andersson,    email: loa@pi.se
+
+         MPLS Working Group, email: mpls@uu.net
+    "
+    DESCRIPTION
+        "Copyright (C) The Internet Society (2004). The
+        initial version of this MIB module was published
+        in RFC 3815. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html
+
+        This MIB contains managed object definitions for
+        configuring and monitoring the Multiprotocol Label
+        Switching (MPLS), Label Distribution Protocol (LDP),
+        utilizing Asynchronous Transfer Mode (ATM) as the Layer 2
+        media."
+    REVISION "200406030000Z"  -- June 3, 2004
+    DESCRIPTION
+        "Initial version published as part of RFC 3815."
+    ::= { mplsStdMIB 5 }
+
+--****************************************************************
+
+mplsLdpAtmObjects       OBJECT IDENTIFIER
+                            ::= { mplsLdpAtmStdMIB 1 }
+mplsLdpAtmConformance   OBJECT IDENTIFIER
+                            ::= { mplsLdpAtmStdMIB 2 }
+
+--****************************************************************
+-- MPLS LDP ATM Objects
+--****************************************************************
+--
+-- Ldp Entity Objects for ATM
+
+--
+
+mplsLdpEntityAtmObjects  OBJECT IDENTIFIER ::=
+                              { mplsLdpAtmObjects 1 }
+
+mplsLdpEntityAtmTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityAtmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains ATM specific information
+        which could be used in the
+        'Optional Parameters' and other ATM specific
+        information.
+
+        This table 'sparse augments' the mplsLdpEntityTable
+        when ATM is the Layer 2 medium."
+    ::= { mplsLdpEntityAtmObjects 1 }
+
+mplsLdpEntityAtmEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityAtmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the ATM parameters
+        and ATM information for this LDP entity."
+    INDEX       {  mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex
+                }
+    ::= { mplsLdpEntityAtmTable 1 }
+
+MplsLdpEntityAtmEntry ::= SEQUENCE {
+    mplsLdpEntityAtmIfIndexOrZero        InterfaceIndexOrZero,
+    mplsLdpEntityAtmMergeCap             INTEGER,
+    mplsLdpEntityAtmLRComponents         Unsigned32,
+    mplsLdpEntityAtmVcDirectionality     INTEGER,
+    mplsLdpEntityAtmLsrConnectivity      INTEGER,
+    mplsLdpEntityAtmDefaultControlVpi    AtmVpIdentifier,
+    mplsLdpEntityAtmDefaultControlVci    MplsAtmVcIdentifier,
+    mplsLdpEntityAtmUnlabTrafVpi         AtmVpIdentifier,
+    mplsLdpEntityAtmUnlabTrafVci         MplsAtmVcIdentifier,
+    mplsLdpEntityAtmStorageType          StorageType,
+    mplsLdpEntityAtmRowStatus            RowStatus
+}
+
+mplsLdpEntityAtmIfIndexOrZero  OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This value represents either the InterfaceIndex
+       or 0 (zero).  The value of zero means that the
+       InterfaceIndex is not known.
+
+       However, if the InterfaceIndex is known, then it must
+       be represented by this value.
+
+       If an InterfaceIndex becomes known, then the
+       network management entity (e.g., SNMP agent) responsible
+       for this object MUST change the value from 0 (zero) to the
+       value of the InterfaceIndex.  If an ATM Label is
+       being used in forwarding data, then the value of this
+       object MUST be the InterfaceIndex."
+    ::= { mplsLdpEntityAtmEntry 1 }
+
+mplsLdpEntityAtmMergeCap OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(0),
+                    vpMerge(1),
+                    vcMerge(2),
+                    vpAndVcMerge(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Denotes the Merge Capability of this Entity.
+        This is the EXACT value for the ATM Session
+        Parameter, field M (for ATM Merge Capabilities).
+        The ATM Session Parameter is an optional
+        parameter in the Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'M, ATM Merge Capabilities
+           Specifies the merge capabilities of an ATM switch.  The
+           following values are supported in this version of the
+           specification:
+
+                  Value          Meaning
+
+                    0            Merge not supported
+                    1            VP Merge supported
+                    2            VC Merge supported
+                    3            VP & VC Merge supported
+
+           If the merge capabilities of the LSRs differ, then:
+           -  Non-merge and VC-merge LSRs may freely interoperate.
+
+           -  The interoperability of VP-merge-capable switches
+              with non-VP-merge-capable switches is a subject
+              for future study.  When the LSRs differ on the
+              use of VP-merge, the session is established,
+              but VP merge is not used.'
+
+           Please refer to the following reference for a
+           complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityAtmEntry 2 }
+
+mplsLdpEntityAtmLRComponents OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of Label Range Components in the Initialization
+        message.  This also represents the number of entries
+        in the mplsLdpEntityAtmLRTable which correspond
+        to this entry.
+
+        This is the EXACT value for the ATM Session Parameter,
+        field N (for Number of label range components).
+        The ATM Session Parameter is an optional parameter
+        in the Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'N, Number of label range components
+           Specifies the number of ATM Label Range
+           Components included in the TLV.'
+
+         Please refer to the following reference for
+         a complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityAtmEntry 3 }
+
+mplsLdpEntityAtmVcDirectionality OBJECT-TYPE
+    SYNTAX      INTEGER {
+                           bidirectional(0),
+                           unidirectional(1)
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 'bidirectional(0)',
+        a given VCI, within a given VPI, is used as a
+        label for both directions independently.
+
+        If the value of this object is 'unidirectional(1)',
+        a given VCI within a VPI designates one direction.
+
+        This is the EXACT value for the ATM Session Parameter,
+        field D (for VC Directionality).  The ATM Session
+        Parameter is an optional parameter in the
+        Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'D, VC Directionality
+           A value of 0 specifies bidirectional VC capability,
+           meaning the LSR can (within a given VPI) support
+           the use of a given VCI as a label for both link
+           directions independently.  A value of 1
+           specifies unidirectional VC capability, meaning
+           (within a given VPI) a given VCI may appear in
+           a label mapping for one direction on the link
+           only.  When either or both of the peers
+           specifies unidirectional VC capability, both
+           LSRs use unidirectional VC label assignment for
+           the link as follows.  The LSRs compare their
+           LDP Identifiers as unsigned integers.  The LSR
+           with the larger LDP Identifier may assign
+           only odd-numbered VCIs in the VPI/VCI
+           range as labels.  The system with the smaller
+           LDP Identifier may assign only even-numbered
+           VCIs in the VPI/VCI range as labels.'
+
+           Please refer to the following reference
+           for a complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityAtmEntry 4 }
+
+mplsLdpEntityAtmLsrConnectivity OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   direct(1),
+                   indirect(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The peer LSR may be connected indirectly by means
+        of an ATM VP so that the VPI values may be different
+        on either endpoint so the label MUST be encoded
+        entirely within the VCI field."
+    DEFVAL { direct }
+    ::= { mplsLdpEntityAtmEntry 5 }
+
+mplsLdpEntityAtmDefaultControlVpi OBJECT-TYPE
+    SYNTAX      AtmVpIdentifier
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The default VPI value for the non-MPLS connection.  The
+        default value of this is 0 (zero) but other values may
+        be configured.  This object allows a different value
+        to be configured."
+    DEFVAL { 0 }
+    ::= { mplsLdpEntityAtmEntry 6 }
+
+mplsLdpEntityAtmDefaultControlVci OBJECT-TYPE
+    SYNTAX      MplsAtmVcIdentifier
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Default VCI value for a non-MPLS connection.  The
+        default value of this is 32 but other values may be
+        configured.  This object allows a different value to
+        be configured."
+    DEFVAL { 32 }
+    ::= { mplsLdpEntityAtmEntry 7 }
+
+mplsLdpEntityAtmUnlabTrafVpi OBJECT-TYPE
+    SYNTAX      AtmVpIdentifier
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "VPI value of the VCC supporting unlabeled traffic.  This
+        non-MPLS connection is used to carry unlabeled (IP)
+        packets.  The default value is the same as the default
+        value of the 'mplsLdpEntityAtmDefaultControlVpi', however
+        another value may be configured."
+    DEFVAL  { 0 }
+    ::= { mplsLdpEntityAtmEntry 8 }
+
+mplsLdpEntityAtmUnlabTrafVci OBJECT-TYPE
+    SYNTAX      MplsAtmVcIdentifier
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "VCI value of the VCC supporting unlabeled traffic.
+        This non-MPLS connection is used to carry unlabeled (IP)
+        packets. The default value is the same as the default
+        value of the 'mplsLdpEntityAtmDefaultControlVci', however
+        another value may be configured."
+    DEFVAL  { 32 }
+    ::= { mplsLdpEntityAtmEntry 9 }
+
+mplsLdpEntityAtmStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityAtmEntry 10 }
+
+mplsLdpEntityAtmRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+         objects in this row may be modified at any time,
+         however, as described in detail in the section
+         entitled, 'Changing Values After Session
+         Establishment', and again described in the
+         DESCRIPTION clause of the mplsLdpEntityAdminStatus
+         object, if a session has been initiated with a Peer,
+         changing objects in this table will wreak havoc
+         with the session and interrupt traffic.  To repeat again:
+         the recommended procedure is to set the
+         mplsLdpEntityAdminStatus to down, thereby explicitly
+         causing a session to be torn down. Then,
+         change objects in this entry, then set the
+         mplsLdpEntityAdminStatus to enable
+         which enables a new session to be initiated."
+    ::= { mplsLdpEntityAtmEntry 11 }
+
+--
+
+-- The MPLS LDP Entity ATM Label Range Table
+--
+
+mplsLdpEntityAtmLRTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MplsLdpEntityAtmLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The MPLS LDP Entity ATM Label Range (LR) Table.
+        The purpose of this table is to provide a mechanism
+        for configuring a contiguous range of vpi's
+        with a contiguous range of vci's, or a 'label range'
+        for LDP Entities.
+
+        LDP Entities which use ATM must have at least one
+        entry in this table.
+
+        There must exist at least one entry in this
+        table for every LDP Entity that has
+        'mplsLdpEntityOptionalParameters' object with
+        a value of 'atmSessionParameters'."
+    ::= { mplsLdpEntityAtmObjects 2 }
+
+mplsLdpEntityAtmLREntry OBJECT-TYPE
+    SYNTAX MplsLdpEntityAtmLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A row in the LDP Entity ATM Label
+        Range Table.  One entry in this table contains
+        information on a single range of labels
+        represented by the configured Upper and Lower
+        Bounds VPI/VCI pairs.  These are the same
+        data used in the Initialization Message.
+
+        NOTE:  The ranges for a specific LDP Entity
+        are UNIQUE and non-overlapping.  For example,
+        for a specific LDP Entity index, there could
+        be one entry having LowerBound vpi/vci == 0/32, and
+        UpperBound vpi/vci == 0/100, and a second entry
+        for this same interface with LowerBound
+        vpi/vci == 0/101 and UpperBound vpi/vci == 0/200.
+        However, there could not be a third entry with
+        LowerBound vpi/vci == 0/200 and
+        UpperBound vpi/vci == 0/300 because this label
+        range overlaps with the second entry (i.e., both
+        entries now have 0/200).
+
+        A row will not become active unless a unique and
+        non-overlapping range is specified.
+
+        At least one label range entry for a
+        specific LDP Entity MUST
+        include the default VPI/VCI  values denoted
+        in the LDP Entity Table.
+
+        A request to create a row with an overlapping
+        range should result in an inconsistentValue
+        error."
+    INDEX       {  mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex,
+                   mplsLdpEntityAtmLRMinVpi,
+                   mplsLdpEntityAtmLRMinVci
+                }
+    ::= { mplsLdpEntityAtmLRTable 1 }
+
+MplsLdpEntityAtmLREntry ::= SEQUENCE {
+    mplsLdpEntityAtmLRMinVpi       AtmVpIdentifier,
+    mplsLdpEntityAtmLRMinVci       MplsAtmVcIdentifier,
+    mplsLdpEntityAtmLRMaxVpi       AtmVpIdentifier,
+    mplsLdpEntityAtmLRMaxVci       MplsAtmVcIdentifier,
+    mplsLdpEntityAtmLRStorageType  StorageType,
+    mplsLdpEntityAtmLRRowStatus    RowStatus
+}
+
+mplsLdpEntityAtmLRMinVpi OBJECT-TYPE
+    SYNTAX AtmVpIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VPI number configured for this range.
+        The value of zero is a valid value for the VPI portion
+        of the label."
+    ::= { mplsLdpEntityAtmLREntry 1 }
+
+mplsLdpEntityAtmLRMinVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VCI number configured for this range."
+    ::= { mplsLdpEntityAtmLREntry 2 }
+
+mplsLdpEntityAtmLRMaxVpi OBJECT-TYPE
+    SYNTAX AtmVpIdentifier
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The maximum VPI number configured for this range."
+    ::= { mplsLdpEntityAtmLREntry 3 }
+
+mplsLdpEntityAtmLRMaxVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The maximum VCI number configured for this range."
+   ::= { mplsLdpEntityAtmLREntry 4 }
+
+mplsLdpEntityAtmLRStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityAtmLREntry 5 }
+
+mplsLdpEntityAtmLRRowStatus OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+         objects in this row may be modified at any time,
+         however, as described in detail in the section
+         entitled, 'Changing Values After Session
+         Establishment', and again described in the
+         DESCRIPTION clause of the
+         mplsLdpEntityAdminStatus object,
+         if a session has been initiated with a Peer,
+         changing objects in this table will
+         wreak havoc with the session and interrupt traffic.
+         To repeat again:  the recommended procedure
+         is to set the mplsLdpEntityAdminStatus to
+         down, thereby explicitly causing a session
+         to be torn down. Then, change objects in this
+         entry, then set the mplsLdpEntityAdminStatus
+         to enable which enables a new session
+         to be initiated."
+    ::= { mplsLdpEntityAtmLREntry 6 }
+
+--
+-- MPLS LDP ATM Session Information
+--
+
+mplsLdpAtmSessionObjects OBJECT IDENTIFIER ::=
+                               { mplsLdpAtmObjects 2 }
+
+mplsLdpAtmSessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpAtmSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table which relates sessions in the
+        'mplsLdpSessionTable' and their label
+        range intersections.  There could be one
+        or more label range intersections between an
+        LDP Entity and LDP Peer using ATM as the
+        underlying  media.  Each row represents
+        a single label range intersection.
+
+        This table cannot use the 'AUGMENTS'
+        clause because there is not necessarily
+        a one-to-one mapping between this table
+        and the mplsLdpSessionTable."
+    ::= { mplsLdpAtmSessionObjects 1 }
+
+mplsLdpAtmSessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpAtmSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on a
+        single label range intersection between an LDP Entity
+        and LDP Peer.
+
+        The information contained in a row is read-only."
+    INDEX       { mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsLdpSessionAtmLRLowerBoundVpi,
+                  mplsLdpSessionAtmLRLowerBoundVci
+                }
+    ::= { mplsLdpAtmSessionTable 1 }
+
+MplsLdpAtmSessionEntry ::= SEQUENCE {
+    mplsLdpSessionAtmLRLowerBoundVpi     AtmVpIdentifier,
+    mplsLdpSessionAtmLRLowerBoundVci     MplsAtmVcIdentifier,
+    mplsLdpSessionAtmLRUpperBoundVpi     AtmVpIdentifier,
+    mplsLdpSessionAtmLRUpperBoundVci     MplsAtmVcIdentifier
+}
+
+mplsLdpSessionAtmLRLowerBoundVpi OBJECT-TYPE
+    SYNTAX AtmVpIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VPI number for this range."
+    ::= { mplsLdpAtmSessionEntry 1 }
+
+mplsLdpSessionAtmLRLowerBoundVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VCI number for this range."
+    ::= { mplsLdpAtmSessionEntry 2 }
+
+mplsLdpSessionAtmLRUpperBoundVpi OBJECT-TYPE
+    SYNTAX AtmVpIdentifier
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum VPI number for this range."
+    ::= { mplsLdpAtmSessionEntry 3 }
+
+mplsLdpSessionAtmLRUpperBoundVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum VCI number for this range."
+    ::= { mplsLdpAtmSessionEntry 4 }
+
+--**************************************************************
+-- Module Conformance Statement
+--**************************************************************
+
+mplsLdpAtmGroups
+    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 1 }
+
+mplsLdpAtmCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 2 }
+
+--
+-- Full Compliance
+--
+
+mplsLdpAtmModuleFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-create and read-write.  In other words,
+        both monitoring and configuration
+        are available when using this MODULE-COMPLIANCE."
+    MODULE -- this module
+    MANDATORY-GROUPS    {
+                           mplsLdpAtmGroup
+                        }
+
+    OBJECT       mplsLdpEntityAtmRowStatus
+    SYNTAX       RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT       mplsLdpEntityAtmLRRowStatus
+    SYNTAX       RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+    ::= { mplsLdpAtmCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpAtmModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+    MODULE -- this module
+    MANDATORY-GROUPS    {
+                           mplsLdpAtmGroup
+                        }
+
+    OBJECT       mplsLdpEntityAtmIfIndexOrZero
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmMergeCap
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmVcDirectionality
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLsrConnectivity
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmDefaultControlVpi
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmDefaultControlVci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmUnlabTrafVpi
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmUnlabTrafVci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmRowStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the
+       only status that needs to be supported."
+
+    OBJECT       mplsLdpEntityAtmLRMaxVpi
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLRMaxVci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLRStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLRRowStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the
+       only status that needs to be supported."
+    ::= { mplsLdpAtmCompliances 2 }
+
+--
+-- units of conformance
+--
+
+mplsLdpAtmGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpEntityAtmIfIndexOrZero,
+    mplsLdpEntityAtmMergeCap,
+    mplsLdpEntityAtmLRComponents,
+    mplsLdpEntityAtmVcDirectionality,
+    mplsLdpEntityAtmLsrConnectivity,
+    mplsLdpEntityAtmDefaultControlVpi,
+    mplsLdpEntityAtmDefaultControlVci,
+    mplsLdpEntityAtmUnlabTrafVpi,
+    mplsLdpEntityAtmUnlabTrafVci,
+    mplsLdpEntityAtmStorageType,
+    mplsLdpEntityAtmRowStatus,
+    mplsLdpEntityAtmLRMaxVpi,
+    mplsLdpEntityAtmLRMaxVci,
+    mplsLdpEntityAtmLRStorageType,
+    mplsLdpEntityAtmLRRowStatus,
+    mplsLdpSessionAtmLRUpperBoundVpi,
+    mplsLdpSessionAtmLRUpperBoundVci
+
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations
+        using ATM as the Layer 2."
+    ::= { mplsLdpAtmGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-LDP-FRAME-RELAY-STD-MIB.mib b/snmp_builder/mibs/MPLS-LDP-FRAME-RELAY-STD-MIB.mib
new file mode 100644
index 0000000..057a584
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LDP-FRAME-RELAY-STD-MIB.mib
@@ -0,0 +1,641 @@
+MPLS-LDP-FRAME-RELAY-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE,
+    MODULE-IDENTITY,
+    Unsigned32
+        FROM SNMPv2-SMI                                 --  [RFC2578]
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF                                --  [RFC2580]
+
+    RowStatus,
+    StorageType
+
+        FROM SNMPv2-TC                                  --  [RFC2579]
+
+    DLCI
+        FROM FRAME-RELAY-DTE-MIB                        --  [RFC2115]
+
+    InterfaceIndexOrZero
+        FROM IF-MIB                                     --  [RFC2020]
+
+    mplsStdMIB
+        FROM MPLS-TC-STD-MIB                            --  [RFC3811]
+
+    mplsLdpEntityLdpId,
+    mplsLdpEntityIndex,
+    mplsLdpPeerLdpId
+        FROM MPLS-LDP-STD-MIB                           --  [RFC3813]
+    ;
+
+mplsLdpFrameRelayStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 3, 2004
+    ORGANIZATION "Multiprotocol Label Switching (mpls)
+                  Working Group"
+    CONTACT-INFO
+        "Joan Cucchiara (jcucchiara@mindspring.com)
+         Marconi Communications, Inc.
+
+         Hans Sjostrand (hans@ipunplugged.com)
+         ipUnplugged
+
+         James V. Luciani (james_luciani@mindspring.com)
+         Marconi Communications, Inc.
+
+         Working Group Chairs:
+         George Swallow,   email: swallow@cisco.com
+         Loa Andersson,    email: loa@pi.se
+
+         MPLS Working Group, email: mpls@uu.net
+    "
+    DESCRIPTION
+        "Copyright (C) The Internet Society (year). The
+        initial version of this MIB module was published
+        in RFC 3815. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html
+
+        This MIB contains managed object definitions for
+        configuring and monitoring the Multiprotocol Label
+        Switching (MPLS), Label Distribution Protocol (LDP),
+        utilizing Frame Relay as the Layer 2 media."
+
+    REVISION "200406030000Z"  -- June 6, 2004
+    DESCRIPTION
+        "Initial version published as part of RFC 3815."
+    ::= { mplsStdMIB 6 }
+
+--****************************************************************
+
+mplsLdpFrameRelayObjects  OBJECT IDENTIFIER
+                           ::= { mplsLdpFrameRelayStdMIB 1 }
+
+mplsLdpFrameRelayConformance   OBJECT IDENTIFIER
+                           ::= { mplsLdpFrameRelayStdMIB 2 }
+
+--****************************************************************
+-- MPLS LDP Frame Relay Objects
+--****************************************************************
+
+--
+-- Ldp Entity Objects for Frame Relay
+--
+
+mplsLdpEntityFrameRelayObjects OBJECT IDENTIFIER ::=
+                                    { mplsLdpFrameRelayObjects 1 }
+
+mplsLdpEntityFrameRelayTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityFrameRelayEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains Frame Relay specific
+        information which could be used in the
+        'Optional Parameters' and other Frame Relay
+        specific information.
+
+        This table 'sparse augments' the mplsLdpEntityTable
+        when Frame Relay is the Layer 2 medium."
+    ::= { mplsLdpEntityFrameRelayObjects 1 }
+
+mplsLdpEntityFrameRelayEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityFrameRelayEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the Frame Relay
+        optional parameters associated with the LDP entity."
+    INDEX       {  mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex
+
+                }
+    ::= { mplsLdpEntityFrameRelayTable 1 }
+
+MplsLdpEntityFrameRelayEntry ::= SEQUENCE {
+    mplsLdpEntityFrameRelayIfIndexOrZero        InterfaceIndexOrZero,
+    mplsLdpEntityFrameRelayMergeCap             INTEGER,
+    mplsLdpEntityFrameRelayLRComponents         Unsigned32,
+    mplsLdpEntityFrameRelayVcDirectionality     INTEGER,
+    mplsLdpEntityFrameRelayStorageType          StorageType,
+    mplsLdpEntityFrameRelayRowStatus            RowStatus
+}
+
+mplsLdpEntityFrameRelayIfIndexOrZero OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This value represents either the InterfaceIndex of
+       the 'ifLayer' where the Frame Relay Labels 'owned' by this
+       entry were created, or 0 (zero).  The value of zero
+       means that the InterfaceIndex is not known.  For example,
+       if the InterfaceIndex is created subsequent to the
+       Frame Relay Label's creation, then it would not be known.
+       However, if the InterfaceIndex is known, then it must
+       be represented by this value.
+
+       If an InterfaceIndex becomes known, then the
+       network management entity (e.g., SNMP agent) responsible
+       for this object MUST change the value from 0 (zero) to the
+       value of the InterfaceIndex.  If an Frame Relay Label is
+       being used in forwarding data, then the value of this
+       object MUST be the InterfaceIndex."
+    ::= { mplsLdpEntityFrameRelayEntry 1 }
+
+mplsLdpEntityFrameRelayMergeCap OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(0),
+                    supported(1)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This represents whether or not the Frame Relay merge
+        capability is supported.  This is the EXACT value for the
+        Frame Relay Session Parameter, field M (for Frame Relay
+        Merge Capabilities).  The Frame Relay Session Parameter
+        is an optional parameter in the Initialization Message.
+
+        The description from rfc3036.txt is:
+        'M, Frame Relay Merge Capabilities
+           Specifies the merge capabilities of a Frame
+           Relay switch.  The following values are
+           supported in this version of the
+           specification:
+
+                  Value          Meaning
+
+                    0            Merge not supported
+                    1            Merge supported
+
+           Non-merge and merge Frame Relay LSRs may
+           freely interoperate.'
+
+           Please refer to the following reference for a
+           complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayEntry 2 }
+
+mplsLdpEntityFrameRelayLRComponents OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of Label Range Components in the Initialization
+        message.  This also represents the number of entries
+        in the mplsLdpEntityFrameRelayLRTable which correspond
+        to this entry.
+
+        This is the EXACT value for the Frame Relay Session
+        Parameter, field N (for Number of label range
+        components).  The Frame Relay Session Parameter
+        is an optional parameter in the Initialization
+        Message.
+
+        The description from rfc3036.txt is:
+
+        'N, Number of label range components
+            Specifies the number of Frame Relay Label
+            Range Components included in the TLV.'
+
+         Please refer to the following reference for a
+         complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayEntry 3 }
+
+mplsLdpEntityFrameRelayVcDirectionality OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          bidirectional(0),
+                          unidirection(1)
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 'bidirectional(0)', then
+        the LSR supports the use of a given DLCI as a label for
+        both directions independently.  If the value of
+        this object is 'unidirectional(1)', then the LSR
+        uses the given DLCI as a label in only one direction.
+
+        This is the EXACT value for the Frame Relay Session
+        Parameter, field D (for VC Directionality).  The
+        Frame Relay Session Parameter is an optional
+        parameter in the Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'D, VC Directionality
+           A value of 0 specifies bidirectional VC capability,
+           meaning the LSR can support the use of a given
+           DLCI as a label for both link directions
+           independently.  A value of 1 specifies
+           unidirectional VC capability, meaning a given
+           DLCI may appear in a label mapping for one
+           direction on the link only.  When either or both
+           of the peers specifies unidirectional VC
+           capability, both LSRs use unidirectional VC
+           label assignment for the link as follows.  The
+           LSRs compare their LDP Identifiers as unsigned
+           integers.  The LSR with the larger LDP
+           Identifier may assign only odd-numbered DLCIs
+           in the range as labels.  The system with the
+           smaller LDP Identifier may assign only
+           even-numbered DLCIs in the range as labels.'
+
+           Please refer to the following reference for a
+           complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayEntry 4 }
+
+mplsLdpEntityFrameRelayStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityFrameRelayEntry 5 }
+
+mplsLdpEntityFrameRelayRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+         objects in this row may be modified at any time,
+         however, as described in detail in the section
+         entitled, 'Changing Values After Session
+         Establishment', and again described in the
+         DESCRIPTION clause of the
+         mplsLdpEntityAdminStatus object,
+         if a session has been initiated with a Peer,
+         changing objects in this table will
+         wreak havoc with the session and interrupt
+         traffic.  To repeat again:
+         the recommended procedure is to set the
+         mplsLdpEntityAdminStatus to
+         down, thereby explicitly causing a
+         session to be torn down. Then,
+         change objects in this entry, then set
+         the mplsLdpEntityAdminStatus
+         to enable which enables a new session
+         to be initiated."
+    ::= { mplsLdpEntityFrameRelayEntry 6 }
+
+--
+-- Frame Relay Label Range Components
+--
+
+mplsLdpEntityFrameRelayLRTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityFrameRelayLREntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains information about the
+
+        Optional Parameters for the Frame Relay Session
+        in the LDP Initialization Message, specifically
+        it contains information about the Frame Relay
+        Label Range Components.
+
+        If the value of the object
+        'mplsLdpEntityOptionalParameters' contains the
+        value of 'frameRelaySessionParameters(3)' then
+        there must be at least one corresponding entry
+        in this table."
+    ::= { mplsLdpEntityFrameRelayObjects 2 }
+
+mplsLdpEntityFrameRelayLREntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityFrameRelayLREntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the Frame Relay
+        Label Range Component associated with the LDP entity."
+    INDEX       {  mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex,
+                   mplsLdpEntityFrameRelayLRMinDlci
+                }
+    ::= { mplsLdpEntityFrameRelayLRTable 1 }
+
+MplsLdpEntityFrameRelayLREntry ::= SEQUENCE {
+    mplsLdpEntityFrameRelayLRMinDlci              DLCI,
+    mplsLdpEntityFrameRelayLRMaxDlci              DLCI,
+    mplsLdpEntityFrameRelayLRLen                  INTEGER,
+    mplsLdpEntityFrameRelayLRStorageType          StorageType,
+    mplsLdpEntityFrameRelayLRRowStatus            RowStatus
+}
+
+mplsLdpEntityFrameRelayLRMinDlci OBJECT-TYPE
+    SYNTAX      DLCI
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The lower bound which is supported.  This value
+        should be the same as that in the Frame Relay Label
+        Range Component's Minimum DLCI field.  The value
+        of zero is valid for the minimum DLCI field of
+        the label."
+    REFERENCE
+        "RFC3034, Use of Label Switching on Frame Relay
+        Networks Specification."
+    ::= { mplsLdpEntityFrameRelayLREntry 1 }
+
+mplsLdpEntityFrameRelayLRMaxDlci OBJECT-TYPE
+    SYNTAX      DLCI
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The upper bound which is supported.  This value
+        should be the same as that in the Frame Relay Label
+        Range Component's Maximum DLCI field."
+    ::= { mplsLdpEntityFrameRelayLREntry 2 }
+
+mplsLdpEntityFrameRelayLRLen OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    tenDlciBits(0),
+                    twentyThreeDlciBits(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the length of the DLCI bits.
+
+        This is the EXACT value for the Len field of the
+        Frame Relay Label Range Component.
+
+        The description from rfc3036.txt is:
+
+        'Len
+            This field specifies the number of bits of the DLCI.
+            The following values are supported:
+
+                 Len    DLCI bits
+
+                 0       10
+                 2       23
+
+            Len values 1 and 3 are reserved.'
+
+         Please refer to the following reference for a complete
+         description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayLREntry 3 }
+
+mplsLdpEntityFrameRelayLRStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityFrameRelayLREntry 4 }
+
+mplsLdpEntityFrameRelayLRRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+         objects in this row may be modified at any time,
+         however, as described in detail in the section
+         entitled, 'Changing Values After Session
+         Establishment', and again described in the
+         DESCRIPTION clause of the
+         mplsLdpEntityAdminStatus object,
+         if a session has been initiated with a Peer,
+         changing objects in this table will
+         wreak havoc with the session and interrupt
+         traffic.  To repeat again:
+         the recommended procedure is to set the
+         mplsLdpEntityAdminStatus to down, thereby
+         explicitly causing a session to be torn down. Then,
+         change objects in this entry, then set the
+         mplsLdpEntityAdminStatus to enable which enables
+         a new session to be initiated."
+    ::= { mplsLdpEntityFrameRelayLREntry 5 }
+
+--
+-- MPLS LDP Frame Relay Session Information
+--
+
+mplsLdpFrameRelaySessionObjects  OBJECT IDENTIFIER ::=
+                           { mplsLdpFrameRelayObjects  2 }
+
+mplsLdpFrameRelaySessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpFrameRelaySessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Frame Relay label range intersections
+        between the LDP Entities and LDP Peers.
+        Each row represents a single label range intersection.
+
+        NOTE:  this table cannot use the 'AUGMENTS'
+
+        clause because there is not necessarily a one-to-one
+        mapping between this table and the
+        mplsLdpSessionTable."
+    ::= { mplsLdpFrameRelaySessionObjects 1 }
+
+mplsLdpFrameRelaySessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpFrameRelaySessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on a
+        single label range intersection between an
+        LDP Entity and LDP Peer.
+
+        The information contained in a row is read-only."
+    INDEX       { mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsLdpFrameRelaySessionMinDlci
+                }
+    ::= { mplsLdpFrameRelaySessionTable 1 }
+
+MplsLdpFrameRelaySessionEntry ::= SEQUENCE {
+    mplsLdpFrameRelaySessionMinDlci    DLCI,
+    mplsLdpFrameRelaySessionMaxDlci    DLCI,
+    mplsLdpFrameRelaySessionLen        INTEGER
+}
+
+mplsLdpFrameRelaySessionMinDlci OBJECT-TYPE
+    SYNTAX      DLCI
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The lower bound of DLCIs which are supported.
+        The value of zero is a valid value for the
+        minimum DLCI field of the label."
+    REFERENCE
+        "RFC3034, Use of Label Switching on Frame Relay
+        Networks Specification."
+    ::= { mplsLdpFrameRelaySessionEntry 1 }
+
+mplsLdpFrameRelaySessionMaxDlci OBJECT-TYPE
+    SYNTAX      DLCI
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The upper bound of DLCIs which are supported."
+    ::= { mplsLdpFrameRelaySessionEntry 2 }
+
+mplsLdpFrameRelaySessionLen OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    tenDlciBits(0),
+                    twentyThreeDlciBits(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the DLCI bits."
+    ::= { mplsLdpFrameRelaySessionEntry 3 }
+
+--****************************************************************
+-- Module Conformance Statement
+--****************************************************************
+
+mplsLdpFrameRelayGroups
+    OBJECT IDENTIFIER ::= { mplsLdpFrameRelayConformance 1 }
+
+mplsLdpFrameRelayCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpFrameRelayConformance 2 }
+
+--
+-- Full Compliance
+--
+
+mplsLdpFrameRelayModuleFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-create and read-write.  In other words,
+        both monitoring and configuration
+        are available when using this MODULE-COMPLIANCE."
+    MODULE -- this module
+        MANDATORY-GROUPS    {
+                               mplsLdpFrameRelayGroup
+                            }
+
+    OBJECT       mplsLdpEntityFrameRelayRowStatus
+    SYNTAX       RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayLRRowStatus
+    SYNTAX       RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+    ::= { mplsLdpFrameRelayCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpFrameRelayModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+    MODULE -- this module
+        MANDATORY-GROUPS    {
+                               mplsLdpFrameRelayGroup
+                            }
+
+    OBJECT       mplsLdpEntityFrameRelayIfIndexOrZero
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayMergeCap
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayVcDirectionality
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayRowStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the
+       only status that needs to be supported."
+
+    OBJECT       mplsLdpEntityFrameRelayLRMaxDlci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayLRLen
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayLRStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayLRRowStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the
+       only status that needs to be supported."
+    ::= { mplsLdpFrameRelayCompliances 2 }
+
+--
+-- units of conformance
+--
+
+mplsLdpFrameRelayGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpEntityFrameRelayIfIndexOrZero,
+    mplsLdpEntityFrameRelayMergeCap,
+    mplsLdpEntityFrameRelayLRComponents,
+    mplsLdpEntityFrameRelayVcDirectionality,
+    mplsLdpEntityFrameRelayStorageType,
+    mplsLdpEntityFrameRelayRowStatus,
+    mplsLdpEntityFrameRelayLRMaxDlci,
+    mplsLdpEntityFrameRelayLRLen,
+    mplsLdpEntityFrameRelayLRStorageType,
+    mplsLdpEntityFrameRelayLRRowStatus,
+    mplsLdpFrameRelaySessionMaxDlci,
+    mplsLdpFrameRelaySessionLen
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations
+        using Frame Relay as the Layer 2."
+    ::= { mplsLdpFrameRelayGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-LDP-GENERIC-STD-MIB.mib b/snmp_builder/mibs/MPLS-LDP-GENERIC-STD-MIB.mib
new file mode 100644
index 0000000..535d36b
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LDP-GENERIC-STD-MIB.mib
@@ -0,0 +1,321 @@
+MPLS-LDP-GENERIC-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE,
+    MODULE-IDENTITY,
+    Unsigned32
+        FROM SNMPv2-SMI                                  -- [RFC2578]
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF                                 -- [RFC2580]
+
+    RowStatus,
+    StorageType
+        FROM SNMPv2-TC                                   -- [RFC2579]
+
+    InterfaceIndexOrZero
+        FROM IF-MIB                                      -- [RFC2020]
+
+    mplsStdMIB
+        FROM MPLS-TC-STD-MIB                             -- [RFC3811]
+
+    mplsLdpEntityLdpId,
+    mplsLdpEntityIndex
+        FROM MPLS-LDP-STD-MIB                            -- [RFC3813]
+    ;
+
+mplsLdpGenericStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 6, 2004
+    ORGANIZATION "Multiprotocol Label Switching (mpls)
+                  Working Group"
+    CONTACT-INFO
+        "Joan Cucchiara (jcucchiara@mindspring.com)
+         Marconi Communications, Inc.
+
+         Hans Sjostrand (hans@ipunplugged.com)
+         ipUnplugged
+
+         James V. Luciani (james_luciani@mindspring.com)
+         Marconi Communications, Inc.
+
+         Working Group Chairs:
+         George Swallow,   email: swallow@cisco.com
+         Loa Andersson,    email: loa@pi.se
+
+         MPLS Working Group, email: mpls@uu.net
+    "
+    DESCRIPTION
+        "Copyright (C) The Internet Society (year). The
+        initial version of this MIB module was published
+        in RFC 3815. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html
+
+        This MIB contains managed object definitions for
+        configuring and monitoring the Multiprotocol Label
+        Switching (MPLS), Label Distribution Protocol (LDP),
+        utilizing ethernet as the Layer 2 media."
+    REVISION "200406030000Z"  -- June 6, 2004
+    DESCRIPTION
+        "Initial version published as part of RFC 3815."
+    ::= { mplsStdMIB 7 }
+
+--****************************************************************
+
+mplsLdpGenericObjects
+         OBJECT IDENTIFIER ::= { mplsLdpGenericStdMIB 1 }
+mplsLdpGenericConformance
+         OBJECT IDENTIFIER ::= { mplsLdpGenericStdMIB 2 }
+
+--****************************************************************
+-- MPLS LDP GENERIC Objects
+--****************************************************************
+
+--
+-- Ldp Entity Objects for Generic Labels
+--
+
+mplsLdpEntityGenericObjects  OBJECT IDENTIFIER ::=
+                              { mplsLdpGenericObjects 1 }
+
+--
+-- The MPLS LDP Entity Generic Label Range Table
+--
+
+mplsLdpEntityGenericLRTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MplsLdpEntityGenericLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The MPLS LDP Entity Generic Label Range (LR)
+        Table.
+
+        The purpose of this table is to provide a mechanism
+        for configurating a contiguous range of generic labels,
+        or a 'label range' for LDP Entities.
+
+        LDP Entities which use Generic Labels must have at least
+        one entry in this table.  In other words, this table
+        'extends' the mpldLdpEntityTable for Generic Labels."
+    ::= { mplsLdpEntityGenericObjects 1 }
+
+mplsLdpEntityGenericLREntry OBJECT-TYPE
+    SYNTAX MplsLdpEntityGenericLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A row in the LDP Entity Generic Label
+        Range (LR) Table.  One entry in this table contains
+        information on a single range of labels
+        represented by the configured Upper and Lower
+        Bounds pairs.  NOTE: there is NO corresponding
+        LDP message which relates to the information
+        in this table, however, this table does provide
+        a way for a user to 'reserve' a generic label
+        range.
+
+        NOTE:  The ranges for a specific LDP Entity
+        are UNIQUE and non-overlapping.
+
+        A row will not be created unless a unique and
+        non-overlapping range is specified."
+    INDEX       {  mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex,
+                   mplsLdpEntityGenericLRMin,
+                   mplsLdpEntityGenericLRMax
+                }
+    ::= { mplsLdpEntityGenericLRTable 1 }
+
+MplsLdpEntityGenericLREntry ::= SEQUENCE {
+    mplsLdpEntityGenericLRMin           Unsigned32,
+    mplsLdpEntityGenericLRMax           Unsigned32,
+    mplsLdpEntityGenericLabelSpace      INTEGER,
+    mplsLdpEntityGenericIfIndexOrZero   InterfaceIndexOrZero,
+    mplsLdpEntityGenericLRStorageType   StorageType,
+    mplsLdpEntityGenericLRRowStatus     RowStatus
+}
+
+mplsLdpEntityGenericLRMin OBJECT-TYPE
+    SYNTAX     Unsigned32(0..1048575)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The minimum label configured for this range."
+    ::= { mplsLdpEntityGenericLREntry 1 }
+
+mplsLdpEntityGenericLRMax OBJECT-TYPE
+    SYNTAX     Unsigned32(0..1048575)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The maximum label configured for this range."
+    ::= { mplsLdpEntityGenericLREntry 2 }
+
+mplsLdpEntityGenericLabelSpace  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          perPlatform(1),
+                          perInterface(2)
+                         }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This value of this object is perPlatform(1), then
+       this means that the label space type is
+       per platform.
+
+       If this object is perInterface(2), then this
+       means that the label space type is per Interface."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.2.1,
+        Label Spaces."
+    DEFVAL { perPlatform }
+    ::= { mplsLdpEntityGenericLREntry 3 }
+
+mplsLdpEntityGenericIfIndexOrZero OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This value represents either the InterfaceIndex of
+       the 'ifLayer' where these Generic Label would be created,
+       or 0 (zero).  The value of zero means that the
+       InterfaceIndex is not known.
+
+       However, if the InterfaceIndex is known,
+       then it must be represented by this value.
+
+       If an InterfaceIndex becomes known, then the
+       network management entity (e.g., SNMP agent) responsible
+       for this object MUST change the value from 0 (zero) to the
+       value of the InterfaceIndex."
+    ::= { mplsLdpEntityGenericLREntry 4 }
+
+mplsLdpEntityGenericLRStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityGenericLREntry 5 }
+
+mplsLdpEntityGenericLRRowStatus OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+         objects in this row may be modified at any time,
+         however, as described in  detail in the section
+         entitled, 'Changing Values After Session
+         Establishment', and again described in the
+         DESCRIPTION clause of the mplsLdpEntityAdminStatus object,
+         if a session has been initiated with a Peer,
+         changing objects in this table will
+         wreak havoc with the session and interrupt traffic.
+         To repeat again:  the recommended procedure is
+         to set the mplsLdpEntityAdminStatus to
+         down, thereby explicitly causing a
+         session to be torn down. Then, change objects
+         in this entry, then set the mplsLdpEntityAdminStatus
+         to enable which enables a new session to be initiated.
+
+         There must exist at least one entry in this
+         table for every LDP Entity that has a
+         generic label configured."
+    ::= { mplsLdpEntityGenericLREntry 6 }
+
+--****************************************************************
+-- Module Conformance Statement
+--****************************************************************
+
+mplsLdpGenericGroups
+    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 1 }
+
+mplsLdpGenericCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 2 }
+
+--
+-- Full Compliance
+--
+
+mplsLdpGenericModuleFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-create and read-write.  In other words,
+        both monitoring and configuration
+        are available when using this MODULE-COMPLIANCE."
+    MODULE -- this module
+        MANDATORY-GROUPS    {
+                               mplsLdpGenericGroup
+                            }
+
+    OBJECT       mplsLdpEntityGenericLRRowStatus
+    SYNTAX       RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+    ::= { mplsLdpGenericCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpGenericModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+    MODULE -- this module
+        MANDATORY-GROUPS    {
+
+                               mplsLdpGenericGroup
+                            }
+
+    OBJECT       mplsLdpEntityGenericLabelSpace
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityGenericIfIndexOrZero
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityGenericLRStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityGenericLRRowStatus
+    SYNTAX       RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required, and active is the
+       only status that needs to be supported."
+    ::= { mplsLdpGenericCompliances 2 }
+
+--
+-- units of conformance
+--
+
+mplsLdpGenericGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpEntityGenericLabelSpace,
+    mplsLdpEntityGenericIfIndexOrZero,
+    mplsLdpEntityGenericLRStorageType,
+    mplsLdpEntityGenericLRRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations
+        using Generic Labels as the Layer 2."
+    ::= { mplsLdpGenericGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-LDP-STD-MIB.mib b/snmp_builder/mibs/MPLS-LDP-STD-MIB.mib
new file mode 100644
index 0000000..50612a8
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LDP-STD-MIB.mib
@@ -0,0 +1,2408 @@
+MPLS-LDP-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
+    Integer32, Counter32, Unsigned32
+        FROM SNMPv2-SMI                                -- [RFC2578]
+
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                              --  [RFC2580]
+
+    RowStatus, TimeInterval, TruthValue,
+    TimeStamp, StorageType
+
+        FROM SNMPv2-TC                                --  [RFC2579]
+
+    InetAddressPrefixLength,
+    InetAddressType,
+    InetAddress,
+    InetPortNumber
+        FROM INET-ADDRESS-MIB                         --  [RFC3291]
+
+    IndexInteger,
+    IndexIntegerNextFree
+        FROM DIFFSERV-MIB                             --  [RFC3289]
+
+    mplsStdMIB,
+    MplsLabelDistributionMethod,
+    MplsLdpIdentifier,
+    MplsLdpLabelType,
+    MplsLspType,
+    MplsLsrIdentifier,
+    MplsRetentionMode
+        FROM MPLS-TC-STD-MIB                          --  [RFC3811]
+
+    MplsIndexType
+        FROM MPLS-LSR-STD-MIB;                        --  [RFC3813]
+
+mplsLdpStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 3, 2004
+    ORGANIZATION "Multiprotocol Label Switching (mpls)
+                  Working Group"
+    CONTACT-INFO
+        "Joan Cucchiara (jcucchiara@mindspring.com)
+         Marconi Communications, Inc.
+
+         Hans Sjostrand (hans@ipunplugged.com)
+         ipUnplugged
+
+         James V. Luciani (james_luciani@mindspring.com)
+         Marconi Communications, Inc.
+
+         Working Group Chairs:
+         George Swallow,   email: swallow@cisco.com
+         Loa Andersson,    email: loa@pi.se
+
+         MPLS Working Group, email: mpls@uu.net"
+    DESCRIPTION
+        "Copyright (C) The Internet Society (2004). The
+        initial version of this MIB module was published
+
+        in RFC 3815. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html
+
+        This MIB contains managed object definitions for the
+        'Multiprotocol Label Switching, Label Distribution
+        Protocol, LDP' document."
+
+    REVISION "200406030000Z"  -- June 3, 2004
+    DESCRIPTION
+       "Initial version published as part of RFC 3815."
+    ::= { mplsStdMIB 4 }
+
+--****************************************************************
+
+mplsLdpNotifications OBJECT IDENTIFIER ::= { mplsLdpStdMIB 0 }
+mplsLdpObjects       OBJECT IDENTIFIER ::= { mplsLdpStdMIB 1 }
+mplsLdpConformance   OBJECT IDENTIFIER ::= { mplsLdpStdMIB 2 }
+
+--****************************************************************
+-- MPLS LDP Objects
+--****************************************************************
+
+mplsLdpLsrObjects    OBJECT IDENTIFIER ::= { mplsLdpObjects 1 }
+
+mplsLdpEntityObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 2 }
+
+--
+-- The MPLS Label Distribution Protocol's
+-- Label Switching Router Objects
+--
+
+mplsLdpLsrId OBJECT-TYPE
+    SYNTAX      MplsLsrIdentifier
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Label Switching Router's Identifier."
+    ::= { mplsLdpLsrObjects 1 }
+
+mplsLdpLsrLoopDetectionCapable OBJECT-TYPE
+    SYNTAX      INTEGER {
+                           none(1),
+                           other(2),
+                           hopCount(3),
+                           pathVector(4),
+                           hopCountAndPathVector(5)
+
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A indication of whether this
+        Label Switching Router supports
+        loop detection.
+
+        none(1) -- Loop Detection is not supported
+                   on this LSR.
+
+        other(2) -- Loop Detection is supported but
+                    by a method other than those
+                    listed below.
+
+        hopCount(3) -- Loop Detection is supported by
+                       Hop Count only.
+
+        pathVector(4) -- Loop Detection is supported by
+                         Path Vector only.
+
+        hopCountAndPathVector(5) -- Loop Detection is
+                             supported by both Hop Count
+                             And Path Vector.
+
+        Since Loop Detection is determined during
+        Session Initialization, an individual session
+        may not be running with loop detection.  This
+        object simply gives an indication of whether or not the
+        LSR has the ability to support Loop Detection and
+        which types."
+    ::= { mplsLdpLsrObjects 2 }
+
+--
+-- The MPLS Label Distribution Protocol Entity Objects
+--
+
+mplsLdpEntityLastChange OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition or deletion of an entry
+        to/from the mplsLdpEntityTable/mplsLdpEntityStatsTable, or
+        the most recent change in value of any objects in the
+        mplsLdpEntityTable.
+
+        If no such changes have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+    ::= { mplsLdpEntityObjects 1 }
+
+mplsLdpEntityIndexNext  OBJECT-TYPE
+    SYNTAX      IndexIntegerNextFree
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+        "This object contains an appropriate value to
+        be used for mplsLdpEntityIndex when creating
+        entries in the mplsLdpEntityTable. The value
+        0 indicates that no unassigned entries are
+        available."
+   ::= { mplsLdpEntityObjects 2 }
+
+mplsLdpEntityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains information about the
+        MPLS Label Distribution Protocol Entities which
+        exist on this Label Switching Router (LSR)
+        or Label Edge Router (LER)."
+     ::= { mplsLdpEntityObjects 3 }
+
+ mplsLdpEntityEntry OBJECT-TYPE
+     SYNTAX      MplsLdpEntityEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "An entry in this table represents an LDP entity.
+         An entry can be created by a network administrator
+         or by an SNMP agent as instructed by LDP."
+     INDEX       {  mplsLdpEntityLdpId, mplsLdpEntityIndex  }
+     ::= { mplsLdpEntityTable 1 }
+
+ MplsLdpEntityEntry ::= SEQUENCE {
+     mplsLdpEntityLdpId                MplsLdpIdentifier,
+     mplsLdpEntityIndex                IndexInteger,
+     mplsLdpEntityProtocolVersion      Unsigned32,
+     mplsLdpEntityAdminStatus          INTEGER,
+     mplsLdpEntityOperStatus           INTEGER,
+     mplsLdpEntityTcpPort              InetPortNumber,
+     mplsLdpEntityUdpDscPort           InetPortNumber,
+     mplsLdpEntityMaxPduLength         Unsigned32,
+     mplsLdpEntityKeepAliveHoldTimer   Unsigned32,
+     mplsLdpEntityHelloHoldTimer       Unsigned32,
+     mplsLdpEntityInitSessionThreshold Integer32,
+     mplsLdpEntityLabelDistMethod      MplsLabelDistributionMethod,
+     mplsLdpEntityLabelRetentionMode   MplsRetentionMode,
+     mplsLdpEntityPathVectorLimit      Integer32,
+     mplsLdpEntityHopCountLimit        Integer32,
+     mplsLdpEntityTransportAddrKind    INTEGER,
+     mplsLdpEntityTargetPeer           TruthValue,
+     mplsLdpEntityTargetPeerAddrType   InetAddressType,
+     mplsLdpEntityTargetPeerAddr       InetAddress,
+     mplsLdpEntityLabelType            MplsLdpLabelType,
+     mplsLdpEntityDiscontinuityTime    TimeStamp,
+     mplsLdpEntityStorageType          StorageType,
+     mplsLdpEntityRowStatus            RowStatus
+ }
+
+ mplsLdpEntityLdpId OBJECT-TYPE
+     SYNTAX      MplsLdpIdentifier
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+         "The LDP identifier."
+    REFERENCE
+        "RFC3036, LDP Specification, Section on LDP Identifiers."
+    ::= { mplsLdpEntityEntry 1 }
+
+mplsLdpEntityIndex OBJECT-TYPE
+    SYNTAX      IndexInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This index is used as a secondary index to uniquely
+        identify this row.  Before creating a row in this table,
+        the 'mplsLdpEntityIndexNext' object should be retrieved.
+        That value should be used for the value of this index
+        when creating a row in this table.  NOTE:  if a value
+        of zero (0) is retrieved, that indicates that no rows
+        can be created in this table at this time.
+
+        A secondary index (this object) is meaningful to some
+        but not all, LDP implementations.  For example
+        an LDP implementation which uses PPP would
+        use this index to differentiate PPP sub-links.
+
+        Another way to use this index is to give this the
+        value of ifIndex.  However, this is dependant
+
+        on the implementation."
+    ::= { mplsLdpEntityEntry 2 }
+
+mplsLdpEntityProtocolVersion OBJECT-TYPE
+    SYNTAX      Unsigned32(1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The version number of the LDP protocol which will be
+       used in the session initialization message.
+
+       Section 3.5.3 in the LDP Specification specifies
+       that the version of the LDP protocol is negotiated during
+       session establishment. The value of this object
+       represents the value that is sent in the initialization
+       message."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.3 Initialization
+       Message."
+    DEFVAL { 1 }
+    ::= { mplsLdpEntityEntry 3 }
+
+mplsLdpEntityAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  enable(1),
+                  disable(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The administrative status of this LDP Entity.
+        If this object is changed from 'enable' to 'disable'
+        and this entity has already attempted to establish
+        contact with a Peer, then all contact with that
+        Peer is lost and all information from that Peer
+        needs to be removed from the MIB. (This implies
+        that the network management subsystem should clean
+        up any related entry in the mplsLdpPeerTable.  This
+        further implies that a 'tear-down' for that session
+        is issued and the session and all information related
+        to that session cease to exist).
+
+        At this point the operator is able to change values
+        which are related to this entity.
+
+        When the admin status is set back to 'enable', then
+        this Entity will attempt to establish a new session
+        with the Peer."
+    DEFVAL  { enable }
+    ::= { mplsLdpEntityEntry 4 }
+
+mplsLdpEntityOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unknown(1),
+                  enabled(2),
+                  disabled(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The operational status of this LDP Entity.
+
+        The value of unknown(1) indicates that the
+        operational status cannot be determined at
+        this time.  The value of unknown should be
+        a transient condition before changing
+        to enabled(2) or disabled(3)."
+    ::= { mplsLdpEntityEntry 5 }
+
+mplsLdpEntityTcpPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The TCP Port for
+        LDP.  The default value is the well-known
+        value of this port."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 3.10, Well-known
+         Numbers, and Section 3.10.1.  UDP and TCP Ports."
+    DEFVAL { 646 }
+    ::= { mplsLdpEntityEntry 6 }
+
+mplsLdpEntityUdpDscPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The UDP Discovery Port for
+        LDP.  The default value is the
+        well-known value for this port."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.4.1,
+        Basic Discovery Mechanism, Section 2.4.2,
+        Extended Discovery Mechanism, Section
+        3.10, Well-known Numbers, and Section 3.10.1.
+
+        UDP and TCP Ports."
+    DEFVAL { 646 }
+    ::= { mplsLdpEntityEntry 7 }
+
+mplsLdpEntityMaxPduLength OBJECT-TYPE
+    SYNTAX      Unsigned32 (256..65535)
+    UNITS       "octets"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The maximum PDU Length that is sent in
+       the Common Session Parameters of an Initialization
+       Message. According to the LDP Specification [RFC3036]
+       a value of 255 or less specifies the
+       default maximum length of 4096 octets, this is why
+       the value of this object starts at 256.  The operator
+       should explicitly choose the default value (i.e., 4096),
+       or some other value.
+
+       The receiving LSR MUST calculate the maximum PDU
+       length for the session by using the smaller of its and
+       its peer's proposals for Max PDU Length."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.3.
+       Initialization Message."
+    DEFVAL { 4096 }
+    ::= { mplsLdpEntityEntry 8 }
+
+mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The 16-bit integer value which is the proposed keep
+        alive hold timer for this LDP Entity."
+    DEFVAL { 40 }
+    ::= { mplsLdpEntityEntry 9 }
+
+mplsLdpEntityHelloHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The 16-bit integer value which is the proposed Hello
+        hold timer for this LDP Entity. The Hello Hold time
+        in seconds.
+
+        An LSR maintains a record of Hellos received
+        from potential peers.  This object represents
+        the Hold Time in the Common Hello Parameters TLV of
+        the Hello Message.
+
+        A value of 0 is a default value and should be
+        interpretted in conjunction with the
+        mplsLdpEntityTargetPeer object.
+
+        If the value of this object is 0: if the value of the
+        mplsLdpEntityTargetPeer object is false(2), then this
+        specifies that the Hold Time's actual default value is
+        15 seconds (i.e., the default Hold time for Link Hellos
+        is 15 seconds).  Otherwise if the value of the
+        mplsLdpEntityTargetPeer object is true(1), then this
+        specifies that the Hold Time's actual default value is
+        45 seconds (i.e., the default Hold time for Targeted
+        Hellos is 45 seconds).
+
+        A value of 65535 means infinite (i.e., wait forever).
+
+        All other values represent the amount of time in
+        seconds to wait for a Hello Message.  Setting the
+        hold time to a value smaller than 15 is not
+        recommended, although not forbidden according
+        to RFC3036."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.2.,
+        Hello Message."
+    DEFVAL { 0 }
+    ::= { mplsLdpEntityEntry 10 }
+
+mplsLdpEntityInitSessionThreshold OBJECT-TYPE
+    SYNTAX      Integer32(0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When attempting to establish a session with
+        a given Peer, the given LDP Entity should
+        send out the SNMP notification,
+        'mplsLdpInitSessionThresholdExceeded', when
+        the number of Session Initialization messages
+        sent exceeds this threshold.
+
+        The notification is used to notify an
+        operator when this Entity and its Peer are
+        possibly engaged in an endless sequence
+        of messages as each NAKs the other's
+
+        Initialization messages with Error Notification
+        messages.  Setting this threshold which triggers
+        the notification is one way to notify the
+        operator.  The notification should be generated
+        each time this threshold is exceeded and
+        for every subsequent Initialization message
+        which is NAK'd with an Error Notification
+        message after this threshold is exceeded.
+
+        A value of 0 (zero) for this object
+        indicates that the threshold is infinity, thus
+        the SNMP notification will never be generated."
+    REFERENCE
+        "RFC3036, LDP Specification,
+        Section 2.5.3 Session Initialization."
+    DEFVAL { 8 }
+    ::= { mplsLdpEntityEntry 11 }
+
+mplsLdpEntityLabelDistMethod OBJECT-TYPE
+    SYNTAX      MplsLabelDistributionMethod
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "For any given LDP session, the method of
+        label distribution must be specified."
+    ::= { mplsLdpEntityEntry 12 }
+
+mplsLdpEntityLabelRetentionMode OBJECT-TYPE
+    SYNTAX      MplsRetentionMode
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The LDP Entity can be configured to use either
+        conservative or liberal label retention mode.
+
+        If the value of this object is conservative(1)
+        then advertized label mappings are retained
+        only if they will be used to forward packets,
+        i.e., if label came from a valid next hop.
+
+        If the value of this object is liberal(2)
+        then all advertized label mappings are retained
+        whether they are from a valid next hop or not."
+    ::= { mplsLdpEntityEntry 13 }
+
+mplsLdpEntityPathVectorLimit OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 0 (zero) then
+        Loop Detection for Path Vectors is disabled.
+
+        Otherwise, if this object has a value greater than
+        zero, then Loop Dection for Path Vectors is enabled,
+        and the Path Vector Limit is this value.
+        Also, the value of the object,
+        'mplsLdpLsrLoopDetectionCapable', must be set to
+        either 'pathVector(4)' or 'hopCountAndPathVector(5)',
+        if this object has a value greater than 0 (zero),
+        otherwise it is ignored."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.8 Loop Dection,
+       Section 3.4.5 Path Vector TLV."
+    ::= { mplsLdpEntityEntry 14 }
+
+mplsLdpEntityHopCountLimit OBJECT-TYPE
+    SYNTAX       Integer32 (0..255)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "If the value of this object is 0 (zero),
+        then Loop Detection using Hop Counters is
+        disabled.
+
+        If the value of this object is greater than
+        0 (zero) then Loop Detection using Hop
+        Counters is enabled, and this object
+        specifies this Entity's maximum allowable
+        value for the Hop Count.
+        Also, the value of the object
+        mplsLdpLsrLoopDetectionCapable must be set
+        to either 'hopCount(3)' or
+        'hopCountAndPathVector(5)' if this object
+        has a value greater than 0 (zero), otherwise
+        it is ignored."
+    DEFVAL { 0 }
+    ::= { mplsLdpEntityEntry 15 }
+
+mplsLdpEntityTransportAddrKind OBJECT-TYPE
+    SYNTAX     INTEGER {
+                          interface(1),
+                          loopback(2)
+                       }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This specifies whether the loopback or interface
+        address is to be used as the transport address
+        in the transport address TLV of the
+        hello message.
+
+        If the value is interface(1), then the IP
+        address of the interface from which hello
+        messages are sent is used as the transport
+        address in the hello message.
+
+        Otherwise, if the value is loopback(2), then the IP
+        address of the loopback interface is used as the
+        transport address in the hello message."
+    DEFVAL { loopback }
+    ::= { mplsLdpEntityEntry 16 }
+
+mplsLdpEntityTargetPeer OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If this LDP entity uses targeted peer then set
+        this to true."
+    DEFVAL { false }
+    ::= { mplsLdpEntityEntry 17 }
+
+mplsLdpEntityTargetPeerAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the internetwork layer address used for
+        the Extended Discovery.  This object indicates how
+        the value of mplsLdpEntityTargetPeerAddr is to
+        be interpreted."
+    ::= { mplsLdpEntityEntry 18 }
+
+mplsLdpEntityTargetPeerAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork layer address
+        used for the Extended Discovery.  The value of
+        mplsLdpEntityTargetPeerAddrType specifies how
+        this address is to be interpreted."
+   ::= { mplsLdpEntityEntry 19 }
+
+mplsLdpEntityLabelType OBJECT-TYPE
+    SYNTAX      MplsLdpLabelType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the optional parameters for the LDP
+        Initialization Message.
+
+        If the value is generic(1) then no
+        optional parameters will be sent in
+        the LDP Initialization message associated
+        with this Entity.
+
+        If the value is atmParameters(2) then
+        a row must be created in the
+        mplsLdpEntityAtmTable, which
+        corresponds to this entry.
+
+        If the value is frameRelayParameters(3) then
+        a row must be created in the
+        mplsLdpEntityFrameRelayTable, which
+        corresponds to this entry."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3.,
+        Initialization Message."
+    ::= { mplsLdpEntityEntry 20 }
+
+mplsLdpEntityDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion
+        at which any one or more of this entity's counters
+        suffered a discontinuity.  The relevant counters
+        are the specific instances associated with this
+        entity of any Counter32 object contained
+        in the 'mplsLdpEntityStatsTable'.  If no such
+        discontinuities have occurred since the last
+        re-initialization of the local management
+        subsystem, then this object contains a zero
+        value."
+    ::= { mplsLdpEntityEntry 21 }
+
+mplsLdpEntityStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL{ nonVolatile }
+    ::= { mplsLdpEntityEntry 22 }
+
+mplsLdpEntityRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.  All writable
+         objects in this row may be modified at any
+         time, however, as described in detail in
+         the section entitled, 'Changing Values After
+         Session Establishment', and again described
+         in the DESCRIPTION clause of the
+         mplsLdpEntityAdminStatus object, if a session
+         has been initiated with a Peer, changing objects
+         in this table will wreak havoc with the session
+         and interrupt traffic.  To repeat again:
+         the recommended procedure is to
+         set the mplsLdpEntityAdminStatus to down, thereby
+         explicitly causing a session to be torn down. Then,
+         change objects in this entry, then set
+         the mplsLdpEntityAdminStatus to enable,
+         which enables a new session to be initiated."
+    ::= { mplsLdpEntityEntry 23 }
+
+--
+-- The MPLS LDP Entity Statistics Table
+--
+
+mplsLdpEntityStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table is a read-only table which augments
+        the mplsLdpEntityTable.  The purpose of this
+        table is to keep statistical information about
+        the LDP Entities on the LSR."
+    ::= { mplsLdpEntityObjects 4 }
+
+mplsLdpEntityStatsEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A row in this table contains statistical information
+        about an LDP Entity.  Some counters contained in a
+        row are for fatal errors received during a former
+        LDP Session associated with this entry.  For example,
+        an LDP PDU received on a TCP connection during an
+        LDP Session contains a fatal error.  That
+        error is counted here, because the
+        session is terminated.
+
+        If the error is NOT fatal (i.e., the Session
+        remains), then the error is counted in the
+        mplsLdpSessionStatsEntry."
+    AUGMENTS       {   mplsLdpEntityEntry  }
+    ::= { mplsLdpEntityStatsTable 1 }
+
+MplsLdpEntityStatsEntry ::= SEQUENCE {
+    mplsLdpEntityStatsSessionAttempts               Counter32,
+    mplsLdpEntityStatsSessionRejectedNoHelloErrors  Counter32,
+    mplsLdpEntityStatsSessionRejectedAdErrors       Counter32,
+    mplsLdpEntityStatsSessionRejectedMaxPduErrors   Counter32,
+    mplsLdpEntityStatsSessionRejectedLRErrors       Counter32,
+    mplsLdpEntityStatsBadLdpIdentifierErrors        Counter32,
+    mplsLdpEntityStatsBadPduLengthErrors            Counter32,
+    mplsLdpEntityStatsBadMessageLengthErrors        Counter32,
+    mplsLdpEntityStatsBadTlvLengthErrors            Counter32,
+    mplsLdpEntityStatsMalformedTlvValueErrors       Counter32,
+    mplsLdpEntityStatsKeepAliveTimerExpErrors       Counter32,
+    mplsLdpEntityStatsShutdownReceivedNotifications Counter32,
+    mplsLdpEntityStatsShutdownSentNotifications     Counter32
+}
+
+mplsLdpEntityStatsSessionAttempts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Initialization messages
+        which were sent or received by this LDP Entity and
+        were NAK'd.   In other words, this counter counts
+        the number of session initializations that failed.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 1 }
+
+mplsLdpEntityStatsSessionRejectedNoHelloErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/No Hello Error
+        Notification Messages sent or received by
+        this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 2 }
+
+mplsLdpEntityStatsSessionRejectedAdErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/Parameters
+        Advertisement Mode Error Notification Messages sent
+        or received by this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 3 }
+
+mplsLdpEntityStatsSessionRejectedMaxPduErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/Parameters
+
+        Max Pdu Length Error Notification Messages sent
+        or received by this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 4 }
+
+mplsLdpEntityStatsSessionRejectedLRErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/Parameters
+        Label Range Notification Messages sent
+        or received by this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 5 }
+
+mplsLdpEntityStatsBadLdpIdentifierErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad LDP Identifier
+        Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 6 }
+
+mplsLdpEntityStatsBadPduLengthErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad PDU Length
+        Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 7 }
+
+mplsLdpEntityStatsBadMessageLengthErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad Message
+        Length Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 8 }
+
+mplsLdpEntityStatsBadTlvLengthErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad TLV
+        Length Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 9 }
+
+mplsLdpEntityStatsMalformedTlvValueErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Malformed TLV
+        Value Fatal Errors detected by the session(s)
+        (past and present) associated with this
+        LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 10 }
+
+mplsLdpEntityStatsKeepAliveTimerExpErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Session Keep Alive
+        Timer Expired Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 11 }
+
+mplsLdpEntityStatsShutdownReceivedNotifications OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Shutdown Notifications
+        received related to session(s) (past and present)
+        associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 12 }
+
+mplsLdpEntityStatsShutdownSentNotifications OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Shutdown Notfications
+        sent related to session(s) (past and present) associated
+        with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 13 }
+
+--
+-- The MPLS LDP Peer Table
+--
+
+mplsLdpSessionObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 3 }
+
+mplsLdpPeerLastChange OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition or deletion to/from the
+        mplsLdpPeerTable/mplsLdpSessionTable."
+    ::= { mplsLdpSessionObjects 1 }
+
+mplsLdpPeerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about LDP peers known by Entities in
+        the mplsLdpEntityTable.  The information in this table
+        is based on information from the Entity-Peer interaction
+        during session initialization but is not appropriate
+        for the mplsLdpSessionTable, because objects in this
+        table may or may not be used in session establishment."
+    ::= { mplsLdpSessionObjects 2 }
+
+mplsLdpPeerEntry OBJECT-TYPE
+    SYNTAX      MplsLdpPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single Peer which is related
+        to a Session.  This table is augmented by
+        the mplsLdpSessionTable."
+    INDEX       { mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId }
+    ::= { mplsLdpPeerTable 1 }
+
+MplsLdpPeerEntry ::= SEQUENCE {
+    mplsLdpPeerLdpId                MplsLdpIdentifier,
+    mplsLdpPeerLabelDistMethod      MplsLabelDistributionMethod,
+    mplsLdpPeerPathVectorLimit      Integer32,
+    mplsLdpPeerTransportAddrType    InetAddressType,
+    mplsLdpPeerTransportAddr        InetAddress
+}
+
+mplsLdpPeerLdpId OBJECT-TYPE
+    SYNTAX      MplsLdpIdentifier
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The LDP identifier of this LDP Peer."
+    ::= { mplsLdpPeerEntry 1 }
+
+mplsLdpPeerLabelDistMethod OBJECT-TYPE
+    SYNTAX      MplsLabelDistributionMethod
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For any given LDP session, the method of
+        label distribution must be specified."
+    ::= { mplsLdpPeerEntry 2 }
+
+mplsLdpPeerPathVectorLimit OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 0 (zero) then
+        Loop Dection for Path Vectors for this Peer
+        is disabled.
+
+        Otherwise, if this object has a value greater than
+        zero, then Loop Dection for Path  Vectors for this
+        Peer is enabled and the Path Vector Limit is this value."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.8 Loop Dection,
+       Section 3.4.5 Path Vector TLV."
+    ::= { mplsLdpPeerEntry 3 }
+
+mplsLdpPeerTransportAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of the Internet address for the
+        mplsLdpPeerTransportAddr object.  The LDP
+        specification describes this as being either
+        an IPv4 Transport Address or IPv6 Transport
+
+        Address which is used in opening the LDP session's
+        TCP connection, or if the optional TLV is not
+        present, then this is the IPv4/IPv6 source
+        address for the UPD packet carrying the Hellos.
+
+        This object specifies how the value of the
+        mplsLdpPeerTransportAddr object should be
+        interpreted."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.5.2
+       Transport Connection Establishment and
+       Section 3.5.2.1 Hello Message Procedures."
+    ::= { mplsLdpPeerEntry 4 }
+
+mplsLdpPeerTransportAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Internet address advertised by the peer
+        in the Hello Message or the Hello source address.
+
+        The type of this address is specified by the
+        value of the mplsLdpPeerTransportAddrType
+        object."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.5.2
+       Transport Connection Establishment and
+       Section 3.5.2.1 Hello Message Procedures."
+    ::= { mplsLdpPeerEntry 5 }
+
+--
+-- The MPLS LDP Sessions Table
+--
+
+mplsLdpSessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Sessions between the LDP Entities
+        and LDP Peers.  This table AUGMENTS the
+        mplsLdpPeerTable.  Each row in this table
+        represents a single session."
+    ::= { mplsLdpSessionObjects 3 }
+
+mplsLdpSessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on a
+        single session between an LDP Entity and LDP Peer.
+        The information contained in a row is read-only.
+
+        Please note:  the Path Vector Limit for the
+        Session is the value which is configured in
+        the corresponding mplsLdpEntityEntry. The
+        Peer's Path Vector Limit is in the
+        mplsLdpPeerPathVectorLimit object in the
+        mplsLdpPeerTable.
+
+        Values which may differ from those configured are
+        noted in the objects of this table, the
+        mplsLdpAtmSessionTable and the
+        mplsLdpFrameRelaySessionTable. A value will
+        differ if it was negotiated between the
+        Entity and the Peer.  Values may or may not
+        be negotiated.  For example, if the values
+        are the same then no negotiation takes place.
+        If they are negotiated, then they may differ."
+    AUGMENTS { mplsLdpPeerEntry }
+    ::= { mplsLdpSessionTable 1 }
+
+MplsLdpSessionEntry ::= SEQUENCE {
+    mplsLdpSessionStateLastChange       TimeStamp,
+    mplsLdpSessionState                 INTEGER,
+    mplsLdpSessionRole                  INTEGER,
+    mplsLdpSessionProtocolVersion       Unsigned32,
+    mplsLdpSessionKeepAliveHoldTimeRem  TimeInterval,
+    mplsLdpSessionKeepAliveTime         Unsigned32,
+    mplsLdpSessionMaxPduLength          Unsigned32,
+    mplsLdpSessionDiscontinuityTime     TimeStamp
+}
+
+mplsLdpSessionStateLastChange OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time this
+        Session entered its current state as
+        denoted by the mplsLdpSessionState
+        object."
+    ::= { mplsLdpSessionEntry 1 }
+
+mplsLdpSessionState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   nonexistent(1),
+                   initialized(2),
+                   openrec(3),
+                   opensent(4),
+                   operational(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current state of the session, all of the
+        states 1 to 5 are based on the state machine
+        for session negotiation behavior."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.5.4,
+        Initialization State Machine."
+    ::= { mplsLdpSessionEntry 2 }
+
+mplsLdpSessionRole OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   unknown(1),
+                   active(2),
+                   passive(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "During session establishment the LSR/LER takes either
+        the active role or the passive role based on address
+        comparisons.  This object indicates whether this LSR/LER
+        was behaving in an active role or passive role during
+        this session's establishment.
+
+        The value of unknown(1), indicates that the role is not
+        able to be determined at the present time."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.5.3.,
+        Session Initialization"
+    ::= { mplsLdpSessionEntry 3 }
+
+mplsLdpSessionProtocolVersion OBJECT-TYPE
+    SYNTAX      Unsigned32(1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version of the LDP Protocol which
+        this session is using.  This is the version of
+
+        the LDP protocol which has been negotiated
+        during session initialization."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.3,
+       Initialization Message."
+    ::= { mplsLdpSessionEntry 4 }
+
+mplsLdpSessionKeepAliveHoldTimeRem OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The keep alive hold time remaining for
+        this session."
+    ::= { mplsLdpSessionEntry 5 }
+
+   mplsLdpSessionKeepAliveTime OBJECT-TYPE
+       SYNTAX      Unsigned32 (1..65535)
+       UNITS       "seconds"
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The negotiated KeepAlive Time which
+           represents the amount of seconds between
+           keep alive messages.  The
+           mplsLdpEntityKeepAliveHoldTimer
+           related to this Session is the
+           value that was proposed as the
+           KeepAlive Time for this session.
+
+           This value is negotiated during
+           session initialization between
+           the entity's proposed value
+           (i.e., the value configured in
+           mplsLdpEntityKeepAliveHoldTimer)
+           and the peer's proposed
+           KeepAlive Hold Timer value.
+           This value is the smaller
+           of the two proposed values."
+       REFERENCE
+          "RFC3036, LDP Specification, Section 3.5.3,
+          Initialization Message."
+       ::= { mplsLdpSessionEntry 6 }
+
+   mplsLdpSessionMaxPduLength OBJECT-TYPE
+       SYNTAX      Unsigned32 (1..65535)
+       UNITS       "octets"
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The value of maximum allowable length for LDP PDUs for
+           this session.  This value may have been negotiated
+           during the Session Initialization.  This object is
+           related to the mplsLdpEntityMaxPduLength object.  The
+           mplsLdpEntityMaxPduLength object specifies the requested
+           LDP PDU length, and this object reflects the negotiated
+           LDP PDU length between the Entity and
+           the Peer."
+       REFERENCE
+          "RFC3036, LDP Specification, Section 3.5.3,
+          Initialization Message."
+       ::= { mplsLdpSessionEntry 7 }
+
+mplsLdpSessionDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion
+        at which any one or more of this session's counters
+        suffered a discontinuity.  The relevant counters are
+        the specific instances associated with this session
+        of any Counter32 object contained in the
+        mplsLdpSessionStatsTable.
+
+        The initial value of this object is the value of
+        sysUpTime when the entry was created in this table.
+
+        Also, a command generator can distinguish when a session
+        between a given Entity and Peer goes away and a new
+        session is established.  This value would change and
+        thus indicate to the command generator that this is a
+        different session."
+    ::= { mplsLdpSessionEntry 8 }
+
+--
+-- The MPLS LDP Session Statistics Table
+--
+
+mplsLdpSessionStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of statistics for Sessions between
+        LDP Entities and LDP Peers.  This table AUGMENTS
+
+        the mplsLdpPeerTable."
+    ::= { mplsLdpSessionObjects 4 }
+
+mplsLdpSessionStatsEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents statistical
+        information on a single session between an LDP
+        Entity and LDP Peer."
+    AUGMENTS       { mplsLdpPeerEntry }
+    ::= { mplsLdpSessionStatsTable 1 }
+
+MplsLdpSessionStatsEntry ::= SEQUENCE {
+    mplsLdpSessionStatsUnknownMesTypeErrors  Counter32,
+    mplsLdpSessionStatsUnknownTlvErrors      Counter32
+}
+
+mplsLdpSessionStatsUnknownMesTypeErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Unknown Message Type
+        Errors detected by this LSR/LER during this session.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpSessionDiscontinuityTime."
+    ::= { mplsLdpSessionStatsEntry 1 }
+
+mplsLdpSessionStatsUnknownTlvErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Unknown TLV Errors
+        detected by this LSR/LER during this session.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpSessionDiscontinuityTime."
+    ::= { mplsLdpSessionStatsEntry 2 }
+
+--
+-- The MPLS LDP Hello Adjacency Table
+--
+
+mplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER ::=
+                              { mplsLdpSessionObjects 5 }
+
+mplsLdpHelloAdjacencyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpHelloAdjacencyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Hello Adjacencies for Sessions."
+    ::= { mplsLdpHelloAdjacencyObjects 1 }
+
+mplsLdpHelloAdjacencyEntry OBJECT-TYPE
+    SYNTAX      MplsLdpHelloAdjacencyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each row represents a single LDP Hello Adjacency.
+        An LDP Session can have one or more Hello
+        Adjacencies."
+         INDEX       { mplsLdpEntityLdpId,
+                       mplsLdpEntityIndex,
+                       mplsLdpPeerLdpId,
+                       mplsLdpHelloAdjacencyIndex }
+    ::= { mplsLdpHelloAdjacencyTable 1 }
+
+MplsLdpHelloAdjacencyEntry ::= SEQUENCE {
+    mplsLdpHelloAdjacencyIndex         Unsigned32,
+    mplsLdpHelloAdjacencyHoldTimeRem   TimeInterval,
+    mplsLdpHelloAdjacencyHoldTime      Unsigned32,
+    mplsLdpHelloAdjacencyType          INTEGER
+}
+
+mplsLdpHelloAdjacencyIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for this specific adjacency."
+    ::= { mplsLdpHelloAdjacencyEntry 1 }
+
+mplsLdpHelloAdjacencyHoldTimeRem OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 65535,
+        this means that the hold time is infinite
+        (i.e., wait forever).
+
+        Otherwise, the time remaining for
+        this Hello Adjacency to receive its
+        next Hello Message.
+
+        This interval will change when the 'next'
+        Hello Message which corresponds to this
+        Hello Adjacency is received unless it
+        is infinite."
+    ::= { mplsLdpHelloAdjacencyEntry 2 }
+
+mplsLdpHelloAdjacencyHoldTime OBJECT-TYPE
+    SYNTAX Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Hello hold time which is negotiated between
+        the Entity and the Peer.  The entity associated
+        with this Hello Adjacency issues a proposed
+        Hello Hold Time value in the
+        mplsLdpEntityHelloHoldTimer object.  The peer
+        also proposes a value and this object represents
+        the negotiated value.
+
+        A value of 0 means the default,
+        which is 15 seconds for Link Hellos
+        and 45 seconds for Targeted Hellos.
+        A value of 65535 indicates an
+        infinite hold time."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.2 Hello Message"
+    ::= { mplsLdpHelloAdjacencyEntry 3 }
+
+mplsLdpHelloAdjacencyType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   link(1),
+                   targeted(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This adjacency is the result of a 'link'
+        hello if the value of this object is link(1).
+
+        Otherwise, it is a result of a 'targeted'
+        hello, targeted(2)."
+    ::= { mplsLdpHelloAdjacencyEntry 4 }
+
+--
+--  Session Label (LSP) Mapping to LSR MIB's
+--  In Segment LIB Information.
+--
+--
+-- NOTE: the next 2 tables map to the
+-- MPLS-LSR-STD-MIB's MplsInSegmentTable
+-- and MplsOutSegmentTable.  The
+-- cross-connect (XC) information is not
+-- represented here as it can be gleaned
+-- from the MPLS-LSR-STD-MIB.
+--
+
+mplsInSegmentLdpLspTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsInSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of LDP LSP's which
+        map to the mplsInSegmentTable in the
+        MPLS-LSR-STD-MIB module."
+    ::= { mplsLdpSessionObjects 6 }
+
+mplsInSegmentLdpLspEntry OBJECT-TYPE
+    SYNTAX      MplsInSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information
+        on a single LDP LSP which is represented by
+        a session's index triple (mplsLdpEntityLdpId,
+        mplsLdpEntityIndex, mplsLdpPeerLdpId) AND the
+        index for the mplsInSegmentTable
+        (mplsInSegmentLdpLspLabelIndex) from the
+        MPLS-LSR-STD-MIB.
+
+        The information contained in a row is read-only."
+    INDEX       { mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsInSegmentLdpLspIndex
+                }
+    ::= { mplsInSegmentLdpLspTable 1 }
+
+MplsInSegmentLdpLspEntry ::= SEQUENCE {
+    mplsInSegmentLdpLspIndex                 MplsIndexType,
+    mplsInSegmentLdpLspLabelType             MplsLdpLabelType,
+    mplsInSegmentLdpLspType                  MplsLspType
+}
+
+mplsInSegmentLdpLspIndex OBJECT-TYPE
+    SYNTAX        MplsIndexType
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "This contains the same value as the
+        mplsInSegmentIndex in the
+        MPLS-LSR-STD-MIB's mplsInSegmentTable."
+    ::= { mplsInSegmentLdpLspEntry 1 }
+
+mplsInSegmentLdpLspLabelType  OBJECT-TYPE
+    SYNTAX        MplsLdpLabelType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The Layer 2 Label Type."
+    ::= { mplsInSegmentLdpLspEntry 2 }
+
+mplsInSegmentLdpLspType OBJECT-TYPE
+    SYNTAX        MplsLspType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of LSP connection."
+    ::= { mplsInSegmentLdpLspEntry 3 }
+
+--
+--  Session Label (LSP) Mapping to LSR MIB's
+--  Out Segment LIB Information.
+--
+
+mplsOutSegmentLdpLspTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsOutSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of LDP LSP's which
+        map to the mplsOutSegmentTable in the
+       MPLS-LSR-STD-MIB."
+    ::= { mplsLdpSessionObjects 7 }
+
+mplsOutSegmentLdpLspEntry OBJECT-TYPE
+    SYNTAX      MplsOutSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information
+        on a single LDP LSP which is represented by
+        a session's index triple (mplsLdpEntityLdpId,
+        mplsLdpEntityIndex, mplsLdpPeerLdpId) AND the
+        index (mplsOutSegmentLdpLspIndex)
+        for the mplsOutSegmentTable.
+
+        The information contained in a row is read-only."
+    INDEX       { mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsOutSegmentLdpLspIndex
+                }
+    ::= { mplsOutSegmentLdpLspTable 1 }
+
+MplsOutSegmentLdpLspEntry ::= SEQUENCE {
+    mplsOutSegmentLdpLspIndex                 MplsIndexType,
+    mplsOutSegmentLdpLspLabelType             MplsLdpLabelType,
+    mplsOutSegmentLdpLspType                  MplsLspType
+}
+
+mplsOutSegmentLdpLspIndex OBJECT-TYPE
+    SYNTAX       MplsIndexType
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This contains the same value as the
+        mplsOutSegmentIndex in the
+        MPLS-LSR-STD-MIB's mplsOutSegmentTable."
+    ::= { mplsOutSegmentLdpLspEntry 1 }
+
+mplsOutSegmentLdpLspLabelType  OBJECT-TYPE
+    SYNTAX        MplsLdpLabelType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The Layer 2 Label Type."
+    ::= { mplsOutSegmentLdpLspEntry 2 }
+
+mplsOutSegmentLdpLspType OBJECT-TYPE
+    SYNTAX        MplsLspType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of LSP connection."
+    ::= { mplsOutSegmentLdpLspEntry 3 }
+
+--
+-- Mpls FEC Table
+--
+
+mplsFecObjects OBJECT IDENTIFIER ::=
+                           { mplsLdpSessionObjects 8 }
+
+mplsFecLastChange OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition/deletion of an entry
+        to/from the mplsLdpFectTable or
+        the most recent change in values to any objects
+        in the mplsLdpFecTable.
+
+        If no such changes have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+   ::= { mplsFecObjects 1 }
+
+mplsFecIndexNext  OBJECT-TYPE
+    SYNTAX         IndexIntegerNextFree
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+        "This object contains an appropriate value to
+        be used for mplsFecIndex when creating
+        entries in the mplsFecTable. The value
+        0 indicates that no unassigned entries are
+        available."
+   ::= { mplsFecObjects 2 }
+
+mplsFecTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsFecEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table represents the FEC
+        (Forwarding Equivalence Class)
+        Information associated with an LSP."
+    ::= { mplsFecObjects 3 }
+
+mplsFecEntry OBJECT-TYPE
+    SYNTAX      MplsFecEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each row represents a single FEC Element."
+    INDEX       { mplsFecIndex }
+    ::= { mplsFecTable 1 }
+
+MplsFecEntry ::= SEQUENCE {
+    mplsFecIndex               IndexInteger,
+    mplsFecType                INTEGER,
+    mplsFecAddrType            InetAddressType,
+    mplsFecAddr                InetAddress,
+    mplsFecAddrPrefixLength    InetAddressPrefixLength,
+    mplsFecStorageType         StorageType,
+    mplsFecRowStatus           RowStatus
+}
+
+mplsFecIndex OBJECT-TYPE
+    SYNTAX      IndexInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index which uniquely identifies this entry."
+    ::= { mplsFecEntry 1 }
+
+mplsFecType  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   prefix(1),
+                   hostAddress(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the FEC.  If the value of this object
+        is 'prefix(1)' then the FEC type described by this
+        row is an address prefix.
+
+        If the value of this object is 'hostAddress(2)' then
+        the FEC type described by this row is a host address."
+    REFERENCE
+        "RFC3036, Section 3.4.1. FEC TLV."
+    ::= { mplsFecEntry 2 }
+
+mplsFecAddrType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is the type of the
+        Internet address.  The value of this object,
+        decides how the value of the mplsFecAddr object
+        is interpreted."
+    REFERENCE
+        "RFC3036, Section 3.4.1. FEC TLV."
+    ::= { mplsFecEntry 4 }
+
+mplsFecAddr     OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is interpreted based
+        on the value of the 'mplsFecAddrType' object.
+
+        This address is then further interpretted as
+        an being used with the address prefix,
+        or as the host address.  This further interpretation
+        is indicated by the 'mplsFecType' object.
+        In other words, the FEC element is populated
+        according to the Prefix FEC Element value encoding, or
+        the Host Address FEC Element encoding."
+    REFERENCE
+        "RFC3036, Section 3.4.1 FEC TLV."
+    ::= { mplsFecEntry 5 }
+
+mplsFecAddrPrefixLength  OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If the value of the 'mplsFecType' is 'hostAddress(2)'
+        then this object is undefined.
+
+        If the value of 'mplsFecType' is 'prefix(1)'
+        then the value of this object is the length in
+        bits of the address prefix represented by
+        'mplsFecAddr', or zero.  If the value of this
+        object is zero, this indicates that the
+        prefix matches all addresses.  In this case the
+        address prefix MUST also be zero (i.e., 'mplsFecAddr'
+        should have the value of zero.)"
+    REFERENCE
+        "RFC3036, Section 3.4.1. FEC TLV."
+    DEFVAL { 0 }
+    ::= { mplsFecEntry 3 }
+
+mplsFecStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsFecEntry 6 }
+
+mplsFecRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.  If the value of this
+        object is 'active(1)', then none of the writable objects
+        of this entry can be modified, except to set this object
+        to 'destroy(6)'.
+
+        NOTE: if this row is being referenced by any entry in
+        the mplsLdpLspFecTable, then a request to destroy
+        this row, will result in an inconsistentValue error."
+    ::= { mplsFecEntry 7 }
+
+--
+--  LDP LSP FEC Table
+--
+
+mplsLdpLspFecLastChange OBJECT-TYPE
+   SYNTAX TimeStamp
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition/deletion of an entry
+        to/from the mplsLdpLspFecTable or
+        the most recent change in values to any objects in the
+        mplsLdpLspFecTable.
+
+        If no such changes have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+  ::= { mplsLdpSessionObjects 9 }
+
+mplsLdpLspFecTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF MplsLdpLspFecEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "A table which shows the relationship between
+      LDP LSPs and FECs.  Each row represents
+      a single LDP LSP to FEC association."
+  ::= { mplsLdpSessionObjects 10 }
+
+mplsLdpLspFecEntry OBJECT-TYPE
+   SYNTAX     MplsLdpLspFecEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An entry represents a LDP LSP
+      to FEC association."
+   INDEX       { mplsLdpEntityLdpId,
+                 mplsLdpEntityIndex,
+                 mplsLdpPeerLdpId,
+                 mplsLdpLspFecSegment,
+                 mplsLdpLspFecSegmentIndex,
+                 mplsLdpLspFecIndex
+                }
+   ::= { mplsLdpLspFecTable 1 }
+
+MplsLdpLspFecEntry ::= SEQUENCE {
+   mplsLdpLspFecSegment       INTEGER,
+   mplsLdpLspFecSegmentIndex  MplsIndexType,
+   mplsLdpLspFecIndex         IndexInteger,
+   mplsLdpLspFecStorageType   StorageType,
+   mplsLdpLspFecRowStatus     RowStatus
+}
+
+mplsLdpLspFecSegment OBJECT-TYPE
+    SYNTAX INTEGER {
+                       inSegment(1),
+                       outSegment(2)
+                   }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "If the value is inSegment(1), then this
+       indicates that the following index,
+       mplsLdpLspFecSegmentIndex, contains the same
+       value as the mplsInSegmentLdpLspIndex.
+
+       Otherwise, if the value of this object is
+
+       outSegment(2),  then this
+       indicates that following index,
+       mplsLdpLspFecSegmentIndex, contains the same
+       value as the mplsOutSegmentLdpLspIndex."
+    ::= { mplsLdpLspFecEntry 1 }
+
+mplsLdpLspFecSegmentIndex OBJECT-TYPE
+    SYNTAX      MplsIndexType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This index is interpretted by using the value
+       of the mplsLdpLspFecSegment.
+
+       If the mplsLdpLspFecSegment is inSegment(1),
+       then this index has the same value as
+       mplsInSegmentLdpLspIndex.
+
+       If the mplsLdpLspFecSegment is outSegment(2),
+       then this index has the same value as
+       mplsOutSegmentLdpLspIndex."
+    ::= { mplsLdpLspFecEntry 2 }
+
+mplsLdpLspFecIndex   OBJECT-TYPE
+    SYNTAX      IndexInteger
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This index identifies the FEC entry in the
+        mplsFecTable associated with this session.
+        In other words, the value of this index
+        is the same as the value of the mplsFecIndex
+        that denotes the FEC associated with this
+        Session."
+    ::= { mplsLdpLspFecEntry 3 }
+
+mplsLdpLspFecStorageType  OBJECT-TYPE
+   SYNTAX      StorageType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "The storage type for this conceptual row.
+       Conceptual rows having the value 'permanent(4)'
+       need not allow write-access to any columnar
+       objects in the row."
+   DEFVAL { nonVolatile }
+   ::= { mplsLdpLspFecEntry 4 }
+
+mplsLdpLspFecRowStatus  OBJECT-TYPE
+   SYNTAX     RowStatus
+   MAX-ACCESS read-create
+   STATUS     current
+   DESCRIPTION
+       "The status of this conceptual row.  If the
+        value of this object is 'active(1)', then
+        none of the writable objects of this entry
+        can be modified.
+
+        The Agent should delete this row when
+        the session ceases to exist.  If an
+        operator wants to associate the session with
+        a different FEC, the recommended
+        procedure is (as described in detail in the section
+        entitled, 'Changing Values After Session
+        Establishment', and again described in the
+        DESCRIPTION clause of the
+        mplsLdpEntityAdminStatus object)
+        is to set the mplsLdpEntityAdminStatus to
+        down, thereby explicitly causing a session
+        to be torn down. This will also
+        cause this entry to be deleted.
+
+        Then, set the mplsLdpEntityAdminStatus
+        to enable which enables a new session to be initiated.
+        Once the session is initiated, an entry may be
+        added to this table to associate the new session
+        with a FEC."
+   ::= { mplsLdpLspFecEntry 5 }
+
+--
+-- Address Message/Address Withdraw Message Information
+--
+-- This information is associated with a specific Session
+-- because Label Address Messages are sent after session
+-- initialization has taken place.
+--
+
+mplsLdpSessionPeerAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionPeerAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table 'extends' the mplsLdpSessionTable.
+        This table is used to store Label Address Information
+        from Label Address Messages received by this LSR from
+        Peers.  This table is read-only and should be updated
+
+        when Label Withdraw Address Messages are received, i.e.,
+        Rows should be deleted as appropriate.
+
+        NOTE:  since more than one address may be contained
+        in a Label Address Message, this table 'sparse augments',
+        the mplsLdpSessionTable's information."
+    ::= { mplsLdpSessionObjects 11 }
+
+mplsLdpSessionPeerAddrEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionPeerAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on
+        a session's single next hop address which was
+        advertised in an Address Message from the LDP peer.
+        The information contained in a row is read-only."
+    INDEX       { mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsLdpSessionPeerAddrIndex
+                }
+    ::= { mplsLdpSessionPeerAddrTable 1 }
+
+MplsLdpSessionPeerAddrEntry ::= SEQUENCE {
+    mplsLdpSessionPeerAddrIndex       Unsigned32,
+    mplsLdpSessionPeerNextHopAddrType InetAddressType,
+    mplsLdpSessionPeerNextHopAddr     InetAddress
+}
+
+mplsLdpSessionPeerAddrIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index which uniquely identifies this entry within
+        a given session."
+    ::= { mplsLdpSessionPeerAddrEntry 1 }
+
+mplsLdpSessionPeerNextHopAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The internetwork layer address type of this Next Hop
+        Address as specified in the Label Address Message
+        associated with this Session. The value of this
+        object indicates how to interpret the value of
+
+        mplsLdpSessionPeerNextHopAddr."
+    ::= { mplsLdpSessionPeerAddrEntry 2 }
+
+mplsLdpSessionPeerNextHopAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The next hop address.  The type of this address
+        is specified by the value of the
+        mplsLdpSessionPeerNextHopAddrType."
+    REFERENCE
+        "RFC3036, Section 2.7. LDP Identifiers
+        and Next Hop Addresses"
+       ::= { mplsLdpSessionPeerAddrEntry 3 }
+
+---
+--- Notifications
+---
+
+mplsLdpInitSessionThresholdExceeded NOTIFICATION-TYPE
+     OBJECTS     {
+                   mplsLdpEntityInitSessionThreshold
+                 }
+     STATUS      current
+     DESCRIPTION
+        "This notification is generated when the value of
+        the 'mplsLdpEntityInitSessionThreshold' object
+        is not zero, and the number of Session
+        Initialization messages exceeds the value
+        of the 'mplsLdpEntityInitSessionThreshold' object."
+     ::= { mplsLdpNotifications 1 }
+
+mplsLdpPathVectorLimitMismatch NOTIFICATION-TYPE
+     OBJECTS     {
+                   mplsLdpEntityPathVectorLimit,
+                   mplsLdpPeerPathVectorLimit
+                 }
+     STATUS      current
+     DESCRIPTION
+        "This notification is sent when the
+        'mplsLdpEntityPathVectorLimit' does NOT match
+        the value of the 'mplsLdpPeerPathVectorLimit' for
+        a specific Entity."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3."
+     ::= { mplsLdpNotifications 2 }
+
+mplsLdpSessionUp NOTIFICATION-TYPE
+     OBJECTS     {
+                    mplsLdpSessionState,
+                    mplsLdpSessionDiscontinuityTime,
+                    mplsLdpSessionStatsUnknownMesTypeErrors,
+                    mplsLdpSessionStatsUnknownTlvErrors
+                 }
+     STATUS      current
+     DESCRIPTION
+        "If this notification is sent when the
+        value of 'mplsLdpSessionState' enters
+        the 'operational(5)' state."
+     ::= { mplsLdpNotifications 3 }
+
+mplsLdpSessionDown NOTIFICATION-TYPE
+     OBJECTS     {
+                    mplsLdpSessionState,
+                    mplsLdpSessionDiscontinuityTime,
+                    mplsLdpSessionStatsUnknownMesTypeErrors,
+                    mplsLdpSessionStatsUnknownTlvErrors
+
+                 }
+     STATUS      current
+     DESCRIPTION
+        "This notification is sent when the
+        value of 'mplsLdpSessionState' leaves
+        the 'operational(5)' state."
+     ::= { mplsLdpNotifications 4 }
+
+--****************************************************************
+-- Module Conformance Statement
+--****************************************************************
+
+mplsLdpGroups
+    OBJECT IDENTIFIER ::= { mplsLdpConformance 1 }
+
+mplsLdpCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpConformance 2 }
+
+--
+-- Full Compliance
+--
+
+mplsLdpModuleFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support
+        for read-create and read-write.  In other
+
+        words, both monitoring and configuration
+        are available when using this MODULE-COMPLIANCE."
+
+    MODULE -- this module
+        MANDATORY-GROUPS    { mplsLdpGeneralGroup,
+                              mplsLdpNotificationsGroup
+                            }
+    GROUP mplsLdpLspGroup
+    DESCRIPTION
+        "This group must be supported if the LSR MIB is
+        implemented, specifically the mplsInSegmentTable,
+        the mplsOutSegmentTable or the mplsXCTable."
+
+    OBJECT mplsLdpEntityTargetPeerAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsLdpEntityTargetPeerAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT mplsLdpEntityRowStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not
+        required."
+
+    OBJECT mplsFecAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsFecAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT mplsFecRowStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not
+        required."
+
+    OBJECT mplsLdpLspFecRowStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not
+        required."
+
+    OBJECT mplsLdpSessionPeerNextHopAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+        "An implementation is only required to support
+        'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsLdpSessionPeerNextHopAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+        and globally unique IPv6 addresses."
+    ::= { mplsLdpCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support
+        for read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+
+    MODULE -- this module
+        MANDATORY-GROUPS    { mplsLdpGeneralGroup,
+                              mplsLdpNotificationsGroup
+                            }
+
+    GROUP mplsLdpLspGroup
+    DESCRIPTION
+        "This group must be supported if the LSR MIB is
+        implemented, specifically the mplsInSegmentTable,
+        the mplsOutSegmentTable or the mplsXCTable."
+
+    OBJECT       mplsLdpEntityProtocolVersion
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAdminStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTcpPort
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityUdpDscPort
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityMaxPduLength
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityKeepAliveHoldTimer
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityHelloHoldTimer
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityInitSessionThreshold
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityLabelDistMethod
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityLabelRetentionMode
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityPathVectorLimit
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityHopCountLimit
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTransportAddrKind
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTargetPeer
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTargetPeerAddrType
+    SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required.
+       An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT       mplsLdpEntityTargetPeerAddr
+    SYNTAX       InetAddress (SIZE(0|4|16))
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required.
+        An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT       mplsLdpEntityLabelType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT mplsLdpEntityRowStatus
+    SYNTAX RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and active is the
+        only status that needs to be supported."
+
+    OBJECT       mplsFecType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsFecAddrPrefixLength
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsFecAddrType
+    SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required.
+       An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT        mplsFecAddr
+    SYNTAX        InetAddress (SIZE(0|4|16))
+    MIN-ACCESS    read-only
+    DESCRIPTION
+        "Write access is not required.
+        An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT       mplsFecStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT mplsFecRowStatus
+    SYNTAX RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and active is the
+        only status that needs to be supported."
+
+    OBJECT       mplsLdpLspFecStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT mplsLdpLspFecRowStatus
+    SYNTAX RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and active is the
+        only status that needs to be supported."
+
+    OBJECT mplsLdpSessionPeerNextHopAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsLdpSessionPeerNextHopAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+        and globally unique IPv6 addresses."
+    ::= { mplsLdpCompliances 2 }
+
+-- units of conformance
+
+mplsLdpGeneralGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpLsrId,
+    mplsLdpLsrLoopDetectionCapable,
+    mplsLdpEntityLastChange,
+    mplsLdpEntityIndexNext,
+    mplsLdpEntityProtocolVersion,
+    mplsLdpEntityAdminStatus,
+    mplsLdpEntityOperStatus,
+    mplsLdpEntityTcpPort,
+    mplsLdpEntityUdpDscPort,
+    mplsLdpEntityMaxPduLength,
+    mplsLdpEntityKeepAliveHoldTimer,
+    mplsLdpEntityHelloHoldTimer,
+    mplsLdpEntityInitSessionThreshold,
+    mplsLdpEntityLabelDistMethod,
+    mplsLdpEntityLabelRetentionMode,
+    mplsLdpEntityPathVectorLimit,
+    mplsLdpEntityHopCountLimit,
+    mplsLdpEntityTransportAddrKind,
+    mplsLdpEntityTargetPeer,
+    mplsLdpEntityTargetPeerAddrType,
+    mplsLdpEntityTargetPeerAddr,
+    mplsLdpEntityLabelType,
+    mplsLdpEntityDiscontinuityTime,
+    mplsLdpEntityStorageType,
+    mplsLdpEntityRowStatus,
+    mplsLdpEntityStatsSessionAttempts,
+    mplsLdpEntityStatsSessionRejectedNoHelloErrors,
+    mplsLdpEntityStatsSessionRejectedAdErrors,
+    mplsLdpEntityStatsSessionRejectedMaxPduErrors,
+    mplsLdpEntityStatsSessionRejectedLRErrors,
+    mplsLdpEntityStatsBadLdpIdentifierErrors,
+    mplsLdpEntityStatsBadPduLengthErrors,
+    mplsLdpEntityStatsBadMessageLengthErrors,
+    mplsLdpEntityStatsBadTlvLengthErrors,
+    mplsLdpEntityStatsMalformedTlvValueErrors,
+    mplsLdpEntityStatsKeepAliveTimerExpErrors,
+    mplsLdpEntityStatsShutdownReceivedNotifications,
+    mplsLdpEntityStatsShutdownSentNotifications,
+    mplsLdpPeerLastChange,
+    mplsLdpPeerLabelDistMethod,
+    mplsLdpPeerPathVectorLimit,
+    mplsLdpPeerTransportAddrType,
+    mplsLdpPeerTransportAddr,
+    mplsLdpHelloAdjacencyHoldTimeRem,
+    mplsLdpHelloAdjacencyHoldTime,
+    mplsLdpHelloAdjacencyType,
+    mplsLdpSessionStateLastChange,
+    mplsLdpSessionState,
+    mplsLdpSessionRole,
+    mplsLdpSessionProtocolVersion,
+    mplsLdpSessionKeepAliveHoldTimeRem,
+    mplsLdpSessionKeepAliveTime,
+    mplsLdpSessionMaxPduLength,
+    mplsLdpSessionDiscontinuityTime,
+    mplsLdpSessionStatsUnknownMesTypeErrors,
+    mplsLdpSessionStatsUnknownTlvErrors,
+    mplsLdpSessionPeerNextHopAddrType,
+    mplsLdpSessionPeerNextHopAddr,
+    mplsFecLastChange,
+    mplsFecIndexNext,
+    mplsFecType,
+    mplsFecAddrType,
+    mplsFecAddr,
+    mplsFecAddrPrefixLength,
+    mplsFecStorageType,
+    mplsFecRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations."
+    ::= { mplsLdpGroups 1 }
+
+mplsLdpLspGroup OBJECT-GROUP
+    OBJECTS {
+    mplsInSegmentLdpLspLabelType,
+    mplsInSegmentLdpLspType,
+    mplsOutSegmentLdpLspLabelType,
+    mplsOutSegmentLdpLspType,
+    mplsLdpLspFecLastChange,
+    mplsLdpLspFecStorageType,
+    mplsLdpLspFecRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "These objects are for LDP implementations
+        which interface to the Label Information Base (LIB)
+        in the MPLS-LSR-STD-MIB.  The LIB is
+        represented in the mplsInSegmentTable,
+        mplsOutSegmentTable and mplsXCTable."
+    ::= { mplsLdpGroups 2 }
+
+mplsLdpNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { mplsLdpInitSessionThresholdExceeded,
+                    mplsLdpPathVectorLimitMismatch,
+                    mplsLdpSessionUp,
+                    mplsLdpSessionDown
+                       }
+    STATUS   current
+    DESCRIPTION
+        "The notification for an MPLS LDP implementation."
+    ::= { mplsLdpGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/MPLS-LSR-STD-MIB.mib b/snmp_builder/mibs/MPLS-LSR-STD-MIB.mib
new file mode 100644
index 0000000..06dc1ce
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-LSR-STD-MIB.mib
@@ -0,0 +1,2106 @@
+MPLS-LSR-STD-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   Integer32, Counter32, Unsigned32, Counter64, Gauge32,
+   zeroDotZero
+      FROM SNMPv2-SMI                                    -- [RFC2578]
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF                                   -- [RFC2580]
+   TruthValue, RowStatus, StorageType, RowPointer,
+   TimeStamp, TEXTUAL-CONVENTION
+      FROM SNMPv2-TC                                     -- [RFC2579]
+   InterfaceIndexOrZero, ifGeneralInformationGroup,
+   ifCounterDiscontinuityGroup
+      FROM IF-MIB                                        -- [RFC2863]
+   mplsStdMIB, MplsLSPID, MplsLabel, MplsBitRate,
+   MplsOwner
+      FROM MPLS-TC-STD-MIB                               -- [RFC3811]
+   AddressFamilyNumbers
+      FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB               -- [IANAFamily]
+   InetAddress, InetAddressType
+      FROM INET-ADDRESS-MIB                              -- [RFC3291]
+   ;
+
+mplsLsrStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200406030000Z"  -- June 3, 2004
+   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
+   CONTACT-INFO
+       "        Cheenu Srinivasan
+                Bloomberg L.P.
+        Email:  cheenu@bloomberg.net
+
+                Arun Viswanathan
+                Force10 Networks, Inc.
+        Email:  arunv@force10networks.com
+
+                Thomas D. Nadeau
+                Cisco Systems, Inc.
+        Email:  tnadeau@cisco.com
+
+        Comments about this document should be emailed
+        directly to the MPLS working group mailing list at
+        mpls@uu.net."
+   DESCRIPTION
+       "This MIB module contains managed object definitions for
+        the Multiprotocol Label Switching (MPLS) Router as
+
+        defined in: Rosen, E., Viswanathan, A., and R.
+        Callon, Multiprotocol Label Switching Architecture,
+        RFC 3031, January 2001.
+
+        Copyright (C) The Internet Society (2004). The
+        initial version of this MIB module was published
+        in RFC 3812. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html"
+
+   -- Revision history.
+   REVISION
+       "200406030000Z"  -- June 3, 2004
+   DESCRIPTION
+       "Initial revision, published as part of RFC 3813."
+   ::= { mplsStdMIB 2 }
+
+-- TEXTUAL-CONVENTIONs
+
+MplsIndexType ::= TEXTUAL-CONVENTION
+   STATUS              current
+   DESCRIPTION
+       "This is an octet string that can be used as a table
+        index in cases where a large addressable space is
+        required such as on an LSR where many applications
+        may be provisioning labels.
+
+        Note that the string containing the single octet with
+        the value 0x00 is a reserved value used to represent
+        special cases. When this TEXTUAL-CONVENTION is used
+        as the SYNTAX of an object, the DESCRIPTION clause
+        MUST specify if this special value is valid and if so
+        what the special meaning is.
+
+        In systems that provide write access to the MPLS-LSR-STD
+        MIB, mplsIndexType SHOULD be used as a simple multi-digit
+        integer encoded as an octet string.
+        No further overloading of the meaning of an index SHOULD
+        be made.
+
+        In systems that do not offer write access to the MPLS-LSR-STD
+        MIB, the mplsIndexType may contain implicit formatting that is
+        specific to the implementation to convey additional
+        information such as interface index, physical card or
+        device, or application id. The interpretation of this
+        additional formatting is implementation dependent and
+        not covered in this document. Such formatting MUST
+
+        NOT impact the basic functionality of read-only access
+        to the MPLS-LSR-STD MIB by management applications that are
+        not aware of the formatting rules."
+   SYNTAX              OCTET STRING (SIZE(1..24))
+
+MplsIndexNextType ::= TEXTUAL-CONVENTION
+   STATUS              current
+   DESCRIPTION
+       "When a MIB module is used for configuration, an object with
+        this SYNTAX always contains a legal value (a non-zero-length
+        string) for an index that is not currently used in the relevant
+        table. The Command Generator (Network Management Application)
+        reads this variable and uses the (non-zero-length string)
+        value read when creating a new row with an SNMP SET.
+
+        When the SET is performed, the Command Responder (agent) must
+        determine whether the value is indeed still unused; Two Network
+        Management Applications may attempt to create a row
+        (configuration entry) simultaneously and use the same value. If
+        it is currently unused, the SET succeeds and the Command
+        Responder (agent) changes the value of this object, according
+        to an implementation-specific algorithm.  If the value is in
+        use, however, the SET fails.  The Network Management
+        Application must then re-read this variable to obtain a new
+        usable value.
+
+        Note that the string containing the single octet with
+        the value 0x00 is a reserved value used to represent
+        the special case where no additional indexes can be
+        provisioned, or in systems that do not offer
+        write access, objects defined using this TEXTUAL-CONVENTION
+        MUST return the string containing the single
+        octet with the value 0x00."
+   SYNTAX              OCTET STRING (SIZE(1..24))
+
+-- Top level components of this MIB module.
+
+-- Notifications
+mplsLsrNotifications OBJECT IDENTIFIER ::= { mplsLsrStdMIB 0 }
+
+-- Tables, Scalars
+mplsLsrObjects       OBJECT IDENTIFIER ::= { mplsLsrStdMIB 1 }
+
+-- Conformance
+mplsLsrConformance   OBJECT IDENTIFIER ::= { mplsLsrStdMIB 2 }
+
+-- MPLS Interface Table.
+mplsInterfaceTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInterfaceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies per-interface MPLS capability
+        and associated information."
+   ::= { mplsLsrObjects 1 }
+
+mplsInterfaceEntry OBJECT-TYPE
+   SYNTAX        MplsInterfaceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "A conceptual row in this table is created
+        automatically by an LSR for every interface capable
+        of supporting MPLS and which is configured to do so.
+        A conceptual row in this table will exist if and only if
+        a corresponding entry in ifTable exists with ifType =
+        mpls(166). If this associated entry in ifTable is
+        operationally disabled (thus removing MPLS
+        capabilities on that interface), the corresponding
+        entry in this table MUST be deleted shortly thereafter.
+        An conceptual row with index 0 is created if the LSR
+        supports per-platform labels. This conceptual row
+        represents the per-platform label space and contains
+        parameters that apply to all interfaces that participate
+        in the per-platform label space. Other conceptual rows
+        in this table represent MPLS interfaces that may
+        participate in either the per-platform or per-
+        interface label spaces, or both.  Implementations
+        that either only support per-platform labels,
+        or have only them configured, may choose to return
+        just the mplsInterfaceEntry of 0 and not return
+        the other rows. This will greatly reduce the number
+        of objects returned. Further information about label
+        space participation of an interface is provided in
+        the DESCRIPTION clause of
+        mplsInterfaceLabelParticipationType."
+   INDEX { mplsInterfaceIndex }
+   ::= { mplsInterfaceTable 1 }
+
+MplsInterfaceEntry ::= SEQUENCE {
+  mplsInterfaceIndex                  InterfaceIndexOrZero,
+  mplsInterfaceLabelMinIn             MplsLabel,
+  mplsInterfaceLabelMaxIn             MplsLabel,
+  mplsInterfaceLabelMinOut            MplsLabel,
+  mplsInterfaceLabelMaxOut            MplsLabel,
+  mplsInterfaceTotalBandwidth         MplsBitRate,
+  mplsInterfaceAvailableBandwidth     MplsBitRate,
+  mplsInterfaceLabelParticipationType BITS
+}
+
+mplsInterfaceIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the
+        MplsInterfaceTable.  A non-zero index for an
+        entry indicates the ifIndex for the corresponding
+        interface entry of the MPLS-layer in the ifTable.
+        The entry with index 0 represents the per-platform
+        label space and contains parameters that apply to all
+        interfaces that participate in the per-platform label
+        space. Other entries defined in this table represent
+        additional MPLS interfaces that may participate in either
+        the per-platform or per-interface label spaces, or both."
+   REFERENCE
+       "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+        and F. Kastenholtz, June 2000"
+   ::= { mplsInterfaceEntry 1 }
+
+mplsInterfaceLabelMinIn OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the minimum value of an MPLS label that this
+        LSR is willing to receive on this interface."
+   ::= { mplsInterfaceEntry 2 }
+
+mplsInterfaceLabelMaxIn OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the maximum value of an MPLS label that this
+        LSR is willing to receive on this interface."
+   ::= { mplsInterfaceEntry 3 }
+
+mplsInterfaceLabelMinOut OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the minimum value of an MPLS label that this
+
+        LSR is willing to send on this interface."
+   ::= { mplsInterfaceEntry 4 }
+
+mplsInterfaceLabelMaxOut OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the maximum value of an MPLS label that this
+        LSR is willing to send on this interface."
+   ::= { mplsInterfaceEntry 5 }
+
+mplsInterfaceTotalBandwidth OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "kilobits per second"
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value indicates the total amount of usable
+        bandwidth on this interface and is specified in
+        kilobits per second (Kbps).  This variable is not
+        applicable when applied to the interface with index
+        0. When this value cannot be measured, this value
+        should contain the nominal bandwidth."
+::= { mplsInterfaceEntry 6 }
+
+mplsInterfaceAvailableBandwidth OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value indicates the total amount of available
+        bandwidth available on this interface and is
+        specified in kilobits per second (Kbps).  This value
+        is calculated as the difference between the amount
+        of bandwidth currently in use and that specified in
+        mplsInterfaceTotalBandwidth.  This variable is not
+        applicable when applied to the interface with index
+        0. When this value cannot be measured, this value
+        should contain the nominal bandwidth."
+::= { mplsInterfaceEntry 7 }
+
+mplsInterfaceLabelParticipationType OBJECT-TYPE
+   SYNTAX  BITS {
+                  perPlatform (0),
+                  perInterface (1)
+              }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "If the value of the mplsInterfaceIndex for this
+        entry is zero, then this entry corresponds to the
+        per-platform label space for all interfaces configured
+        to use that label space. In this case the perPlatform(0)
+        bit MUST be set; the perInterface(1) bit is meaningless
+        and MUST be ignored.
+
+        The remainder of this description applies to entries
+        with a non-zero value of mplsInterfaceIndex.
+
+        If the perInterface(1) bit is set then the value of
+        mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
+        mplsInterfaceLabelMinOut, and
+        mplsInterfaceLabelMaxOut for this entry reflect the
+        label ranges for this interface.
+
+        If only the perPlatform(0) bit is set, then the value of
+        mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
+        mplsInterfaceLabelMinOut, and
+        mplsInterfaceLabelMaxOut for this entry MUST be
+        identical to the instance of these objects with
+        index 0.  These objects may only vary from the entry
+        with index 0 if both the perPlatform(0) and perInterface(1)
+        bits are set.
+
+        In all cases, at a minimum one of the perPlatform(0) or
+        perInterface(1) bits MUST be set to indicate that
+        at least one label space is in use by this interface. In
+        all cases, agents MUST ensure that label ranges are
+        specified consistently and MUST return an
+        inconsistentValue error when they do not."
+   REFERENCE
+       "Rosen, E., Viswanathan, A., and R. Callon,
+        Multiprotocol Label Switching Architecture, RFC
+        3031, January 2001."
+::= { mplsInterfaceEntry 8 }
+
+-- End of mplsInterfaceTable
+
+-- MPLS Interface Performance Table.
+
+mplsInterfacePerfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInterfacePerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table provides MPLS performance information on
+        a per-interface basis."
+   ::= { mplsLsrObjects 2 }
+
+mplsInterfacePerfEntry OBJECT-TYPE
+   SYNTAX        MplsInterfacePerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by the LSR for
+        every interface capable of supporting MPLS.  Its is
+        an extension to the mplsInterfaceEntry table.
+        Note that the discontinuity behavior of entries in
+        this table MUST be based on the corresponding
+        ifEntry's ifDiscontinuityTime."
+   AUGMENTS      { mplsInterfaceEntry }
+      ::= { mplsInterfacePerfTable 1 }
+
+MplsInterfacePerfEntry ::= SEQUENCE {
+      -- incoming direction
+      mplsInterfacePerfInLabelsInUse         Gauge32,
+      mplsInterfacePerfInLabelLookupFailures Counter32,
+      -- outgoing direction
+      mplsInterfacePerfOutLabelsInUse      Gauge32,
+      mplsInterfacePerfOutFragmentedPkts   Counter32
+   }
+
+mplsInterfacePerfInLabelsInUse OBJECT-TYPE
+   SYNTAX        Gauge32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of labels that are in
+        use at this point in time on this interface in the
+        incoming direction. If the interface participates in
+        only the per-platform label space, then the value of
+        the instance of this object MUST be identical to
+        the value of the instance with index 0. If the
+        interface participates in the per-interface label
+        space, then the instance of this object MUST
+        represent the number of per-interface labels that
+        are in use on this interface."
+   ::= { mplsInterfacePerfEntry 1 }
+
+mplsInterfacePerfInLabelLookupFailures  OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of labeled packets
+        that have been received on this interface and which
+        were discarded because there was no matching cross-
+        connect entry. This object MUST count on a per-
+        interface basis regardless of which label space the
+        interface participates in."
+   ::= { mplsInterfacePerfEntry 2 }
+
+mplsInterfacePerfOutLabelsInUse OBJECT-TYPE
+   SYNTAX        Gauge32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of top-most labels in
+        the outgoing label stacks that are in use at this
+        point in time on this interface. This object MUST
+        count on a per-interface basis regardless of which
+        label space the interface participates in."
+   ::= { mplsInterfacePerfEntry 3 }
+
+mplsInterfacePerfOutFragmentedPkts OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object counts the number of outgoing MPLS
+        packets that required fragmentation before
+        transmission on this interface. This object MUST
+        count on a per-interface basis regardless of which
+        label space the interface participates in."
+::= { mplsInterfacePerfEntry 4 }
+
+-- mplsInterfacePerf Table end.
+
+mplsInSegmentIndexNext OBJECT-TYPE
+   SYNTAX        MplsIndexNextType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsInSegmentIndex when creating entries
+        in the mplsInSegmentTable. The special value of a
+        string containing the single octet 0x00 indicates
+        that no new entries can be created in this table.
+        Agents not allowing managers to create entries
+
+        in this table MUST set this object to this special
+        value."
+      ::= { mplsLsrObjects 3 }
+
+-- in-segment table.
+mplsInSegmentTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains a description of the incoming MPLS
+        segments (labels) to an LSR and their associated parameters.
+        The index for this table is mplsInSegmentIndex.
+        The index structure of this table is specifically designed
+        to handle many different MPLS implementations that manage
+        their labels both in a distributed and centralized manner.
+        The table is also designed to handle existing MPLS labels
+        as defined in RFC3031 as well as longer ones that may
+        be necessary in the future.
+
+        In cases where the label cannot fit into the
+        mplsInSegmentLabel object, the mplsInSegmentLabelPtr
+        will indicate this by being set to the first accessible
+        column in the appropriate extension table's row.
+        In this case an additional table MUST
+        be provided and MUST be indexed by at least the indexes
+        used by this table. In all other cases when the label is
+        represented within the mplsInSegmentLabel object, the
+        mplsInSegmentLabelPtr MUST be set to 0.0. Due to the
+        fact that MPLS labels may not exceed 24 bits, the
+        mplsInSegmentLabelPtr object is only a provision for
+        future-proofing the MIB module. Thus, the definition
+        of any extension tables is beyond the scope of this
+        MIB module."
+      ::= { mplsLsrObjects 4 }
+
+mplsInSegmentEntry  OBJECT-TYPE
+   SYNTAX        MplsInSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one incoming
+        segment as is represented in an LSR's LFIB.
+        An entry can be created by a network
+        administrator or an SNMP agent, or an MPLS signaling
+        protocol.  The creator of the entry is denoted by
+        mplsInSegmentOwner.
+
+        The value of mplsInSegmentRowStatus cannot be active(1)
+        unless the ifTable entry corresponding to
+        mplsInSegmentInterface exists.  An entry in this table
+        must match any incoming packets, and indicates an
+        instance of mplsXCEntry based on which forwarding
+        and/or switching actions are taken."
+   INDEX { mplsInSegmentIndex }
+   ::= { mplsInSegmentTable 1 }
+
+MplsInSegmentEntry ::= SEQUENCE {
+  mplsInSegmentIndex                MplsIndexType,
+  mplsInSegmentInterface            InterfaceIndexOrZero,
+  mplsInSegmentLabel                MplsLabel,
+  mplsInSegmentLabelPtr             RowPointer,
+  mplsInSegmentNPop                 Integer32,
+  mplsInSegmentAddrFamily           AddressFamilyNumbers,
+  mplsInSegmentXCIndex              MplsIndexType,
+  mplsInSegmentOwner                MplsOwner ,
+  mplsInSegmentTrafficParamPtr      RowPointer,
+  mplsInSegmentRowStatus            RowStatus,
+  mplsInSegmentStorageType          StorageType
+}
+
+mplsInSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "The index for this in-segment. The
+        string containing the single octet 0x00
+        MUST not be used as an index."
+   ::= { mplsInSegmentEntry 1 }
+
+mplsInSegmentInterface OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object represents the
+        interface index for the incoming MPLS interface.  A
+        value of zero represents all interfaces participating in
+        the per-platform label space.  This may only be used
+        in cases where the incoming interface and label
+        are associated with the same mplsXCEntry. Specifically,
+        given a label and any incoming interface pair from the
+        per-platform label space, the outgoing label/interface
+        mapping remains the same. If this is not the case,
+        then individual entries MUST exist that
+
+        can then be mapped to unique mplsXCEntries."
+   ::= { mplsInSegmentEntry 2 }
+
+mplsInSegmentLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "If the corresponding instance of mplsInSegmentLabelPtr is
+      zeroDotZero then this object MUST contain the incoming label
+      associated with this in-segment. If not this object SHOULD
+      be zero and MUST be ignored."
+   ::= { mplsInSegmentEntry 3 }
+
+mplsInSegmentLabelPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If the label for this segment cannot be represented
+        fully within the mplsInSegmentLabel object,
+        this object MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsInSegmentTopLabel
+        object SHOULD be set to 0 and ignored. This object MUST
+        be set to zeroDotZero otherwise."
+   DEFVAL { zeroDotZero }
+   ::= { mplsInSegmentEntry 4 }
+
+mplsInSegmentNPop OBJECT-TYPE
+   SYNTAX        Integer32 (1..2147483647)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The number of labels to pop from the incoming
+        packet.  Normally only the top label is popped from
+        the packet and used for all switching decisions for
+        that packet.  This is indicated by setting this
+        object to the default value of 1. If an LSR supports
+        popping of more than one label, this object MUST
+        be set to that number. This object cannot be modified
+        if mplsInSegmentRowStatus is active(1)."
+   DEFVAL        { 1 }
+   ::= { mplsInSegmentEntry 5 }
+
+mplsInSegmentAddrFamily OBJECT-TYPE
+   SYNTAX        AddressFamilyNumbers
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The IANA address family [IANAFamily] of packets
+        received on this segment, which is used at an egress
+        LSR to deliver them to the appropriate layer 3 entity.
+        A value of other(0) indicates that the family type is
+        either unknown or undefined; this SHOULD NOT be used
+        at an egress LSR. This object cannot be
+        modified if mplsInSegmentRowStatus is active(1)."
+   REFERENCE
+       "Internet Assigned Numbers Authority (IANA), ADDRESS
+        FAMILY NUMBERS, (http://www.iana.org/assignments/
+        address-family-numbers), for MIB see:
+        http://www.iana.org/assignments/
+        ianaaddressfamilynumbers-mib
+"
+   DEFVAL        { other }
+   ::= { mplsInSegmentEntry 6 }
+
+mplsInSegmentXCIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Index into mplsXCTable which identifies which cross-
+        connect entry this segment is part of.  The string
+        containing the single octet 0x00 indicates that this
+        entry is not referred to by any cross-connect entry.
+        When a cross-connect entry is created which this
+        in-segment is a part of, this object is automatically
+        updated to reflect the value of mplsXCIndex of that
+        cross-connect entry."
+   ::= { mplsInSegmentEntry 7 }
+
+mplsInSegmentOwner OBJECT-TYPE
+   SYNTAX        MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes the entity that created and is responsible
+        for managing this segment."
+   ::= { mplsInSegmentEntry 8 }
+
+mplsInSegmentTrafficParamPtr OBJECT-TYPE
+   SYNTAX            RowPointer
+   MAX-ACCESS        read-create
+   STATUS            current
+   DESCRIPTION
+     "This variable represents a pointer to the traffic
+      parameter specification for this in-segment.  This
+      value may point at an entry in the
+      mplsTunnelResourceTable in the MPLS-TE-STD-MIB (RFC3812)
+      to indicate which traffic parameter settings for this
+      segment if it represents an LSP used for a TE tunnel.
+
+      This value may optionally point at an
+      externally defined traffic parameter specification
+      table.  A value of zeroDotZero indicates best-effort
+      treatment.  By having the same value of this object,
+      two or more segments can indicate resource sharing
+      of such things as LSP queue space, etc.
+
+      This object cannot be modified if mplsInSegmentRowStatus
+      is active(1).  For entries in this table that
+      are preserved after a re-boot, the agent MUST ensure
+      that their integrity be preserved, or this object should
+      be set to 0.0 if it cannot."
+   DEFVAL { zeroDotZero }
+   ::= { mplsInSegmentEntry 9 }
+
+mplsInSegmentRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table. When a row in this
+        table has a row in the active(1) state, no
+        objects in this row can be modified except the
+        mplsInSegmentRowStatus and mplsInSegmentStorageType."
+   ::= { mplsInSegmentEntry 10 }
+
+mplsInSegmentStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. The agent MUST ensure that this object's
+        value remains consistent with the associated
+        mplsXCEntry. Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar objects in the row."
+   REFERENCE
+        "See RFC2579."
+   DEFVAL { volatile }
+   ::= { mplsInSegmentEntry 11 }
+
+-- End of mplsInSegmentTable
+
+-- in-segment performance table.
+
+mplsInSegmentPerfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInSegmentPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains statistical information for
+        incoming MPLS segments to an LSR."
+   ::= { mplsLsrObjects 5 }
+
+mplsInSegmentPerfEntry  OBJECT-TYPE
+   SYNTAX        MplsInSegmentPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table contains statistical
+        information about one incoming segment which is
+        configured in the mplsInSegmentTable. The counters
+        in this entry should behave in a manner similar to
+        that of the interface.
+        mplsInSegmentPerfDiscontinuityTime indicates the
+        time of the last discontinuity in all of these
+        objects."
+   AUGMENTS  { mplsInSegmentEntry }
+   ::= { mplsInSegmentPerfTable 1 }
+
+MplsInSegmentPerfEntry ::= SEQUENCE {
+    mplsInSegmentPerfOctets             Counter32,
+    mplsInSegmentPerfPackets            Counter32,
+    mplsInSegmentPerfErrors             Counter32,
+    mplsInSegmentPerfDiscards           Counter32,
+    -- high capacity counter
+    mplsInSegmentPerfHCOctets           Counter64,
+    mplsInSegmentPerfDiscontinuityTime  TimeStamp
+   }
+
+mplsInSegmentPerfOctets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value represents the total number of octets
+        received by this segment. It MUST be equal to the
+        least significant 32 bits of
+        mplsInSegmentPerfHCOctets
+        if mplsInSegmentPerfHCOctets is supported according to
+        the rules spelled out in RFC2863."
+   ::= { mplsInSegmentPerfEntry 1 }
+
+mplsInSegmentPerfPackets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Total number of packets received by this segment."
+   ::= { mplsInSegmentPerfEntry 2 }
+
+mplsInSegmentPerfErrors OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The number of errored packets received on this
+        segment."
+   ::= { mplsInSegmentPerfEntry 3 }
+
+mplsInSegmentPerfDiscards OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The number of labeled packets received on this in-
+        segment, which were chosen to be discarded even
+        though no errors had been detected to prevent their
+        being transmitted.  One possible reason for
+        discarding such a labeled packet could be to free up
+        buffer space."
+   ::= { mplsInSegmentPerfEntry 4 }
+
+mplsInSegmentPerfHCOctets OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The total number of octets received.  This is the 64
+        bit version of mplsInSegmentPerfOctets,
+        if mplsInSegmentPerfHCOctets is supported according to
+        the rules spelled out in RFC2863."
+   ::= { mplsInSegmentPerfEntry 5 }
+
+mplsInSegmentPerfDiscontinuityTime OBJECT-TYPE
+   SYNTAX      TimeStamp
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value of sysUpTime on the most recent occasion
+        at which any one or more of this segment's Counter32
+        or Counter64 suffered a discontinuity. If no such
+        discontinuities have occurred since the last re-
+        initialization of the local management subsystem,
+        then this object contains a zero value."
+   ::= { mplsInSegmentPerfEntry 6 }
+
+-- End of mplsInSegmentPerfTable.
+
+-- out-segment table.
+
+mplsOutSegmentIndexNext OBJECT-TYPE
+   SYNTAX        MplsIndexNextType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsOutSegmentIndex when creating entries
+        in the mplsOutSegmentTable. The special value of a
+        string containing the single octet 0x00
+        indicates that no new entries can be created in this
+        table. Agents not allowing managers to create entries
+        in this table MUST set this object to this special
+        value."
+   ::= { mplsLsrObjects 6 }
+
+mplsOutSegmentTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsOutSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains a representation of the outgoing
+        segments from an LSR."
+   ::= { mplsLsrObjects 7 }
+
+mplsOutSegmentEntry  OBJECT-TYPE
+   SYNTAX        MplsOutSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one outgoing
+
+        segment.  An entry can be created by a network
+        administrator, an SNMP agent, or an MPLS signaling
+        protocol.  The object mplsOutSegmentOwner indicates
+        the creator of this entry. The value of
+        mplsOutSegmentRowStatus cannot be active(1) unless
+        the ifTable entry corresponding to
+        mplsOutSegmentInterface exists.
+
+        Note that the indexing of this table uses a single,
+        arbitrary index (mplsOutSegmentIndex) to indicate
+        which out-segment (i.e.: label) is being switched to
+        from which in-segment (i.e: label) or in-segments.
+        This is necessary because it is possible to have an
+        equal-cost multi-path situation where two identical
+        out-going labels are assigned to the same
+        cross-connect (i.e.: they go to two different neighboring
+        LSRs); thus, requiring two out-segments. In order to
+        preserve the uniqueness of the references
+        by the mplsXCEntry, an arbitrary integer must be used as
+        the index for this table."
+   INDEX { mplsOutSegmentIndex }
+   ::= { mplsOutSegmentTable 1 }
+
+MplsOutSegmentEntry ::= SEQUENCE {
+  mplsOutSegmentIndex                MplsIndexType,
+  mplsOutSegmentInterface            InterfaceIndexOrZero,
+  mplsOutSegmentPushTopLabel         TruthValue,
+  mplsOutSegmentTopLabel             MplsLabel,
+  mplsOutSegmentTopLabelPtr          RowPointer,
+  mplsOutSegmentNextHopAddrType      InetAddressType,
+  mplsOutSegmentNextHopAddr          InetAddress,
+  mplsOutSegmentXCIndex              MplsIndexType,
+  mplsOutSegmentOwner                MplsOwner,
+  mplsOutSegmentTrafficParamPtr      RowPointer,
+  mplsOutSegmentRowStatus            RowStatus,
+  mplsOutSegmentStorageType          StorageType
+}
+
+mplsOutSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This value contains a unique index for this row.
+        While a value of a string containing the single
+        octet 0x00 is not valid as an index for entries
+        in this table, it can be supplied as a valid value
+        to index the mplsXCTable to represent entries for
+
+        which no out-segment has been configured or
+        exists."
+   ::= { mplsOutSegmentEntry 1 }
+
+mplsOutSegmentInterface OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value must contain the interface index of the
+        outgoing interface. This object cannot be modified
+        if mplsOutSegmentRowStatus is active(1). The
+        mplsOutSegmentRowStatus cannot be set to active(1)
+        until this object is set to a value corresponding to
+        a valid ifEntry."
+   ::= { mplsOutSegmentEntry 2 }
+
+mplsOutSegmentPushTopLabel OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value indicates whether or not a top label
+        should be pushed onto the outgoing packet's label
+        stack.  The value of this variable MUST be set to
+        true(1) if the outgoing interface does not support
+        pop-and-go (and no label stack remains). For example,
+        on ATM interface, or if the segment represents a
+        tunnel origination.  Note that it is considered
+        an error in the case that mplsOutSegmentPushTopLabel
+        is set to false, but the cross-connect entry which
+        refers to this out-segment has a non-zero
+        mplsLabelStackIndex.  The LSR MUST ensure that this
+        situation does not happen. This object cannot be
+        modified if mplsOutSegmentRowStatus is active(1)."
+   DEFVAL { true }
+   ::= { mplsOutSegmentEntry 3 }
+
+mplsOutSegmentTopLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If mplsOutSegmentPushTopLabel is true then this
+        represents the label that should be pushed onto the
+        top of the outgoing packet's label stack. Otherwise
+        this value SHOULD be set to 0 by the management
+        station and MUST be ignored by the agent. This
+
+        object cannot be modified if mplsOutSegmentRowStatus
+        is active(1)."
+   DEFVAL { 0 }
+   ::= { mplsOutSegmentEntry 4 }
+
+mplsOutSegmentTopLabelPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If the label for this segment cannot be represented
+        fully within the mplsOutSegmentLabel object,
+        this object MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsOutSegmentTopLabel
+        object SHOULD be set to 0 and ignored. This object
+        MUST be set to zeroDotZero otherwise."
+   DEFVAL { zeroDotZero }
+   ::= { mplsOutSegmentEntry 5 }
+
+mplsOutSegmentNextHopAddrType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates the next hop Internet address type.
+        Only values unknown(0), ipv4(1) or ipv6(2)
+        have to be supported.
+
+        A value of unknown(0) is allowed only when
+        the outgoing interface is of type point-to-point.
+        If any other unsupported values are attempted in a set
+        operation, the agent MUST return an inconsistentValue
+        error."
+   REFERENCE
+       "See RFC3291."
+   ::= { mplsOutSegmentEntry 6 }
+
+mplsOutSegmentNextHopAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The internet address of the next hop. The type of
+        this address is determined by the value of the
+        mplslOutSegmentNextHopAddrType object.
+
+        This object cannot be modified if
+
+        mplsOutSegmentRowStatus is active(1)."
+   ::= { mplsOutSegmentEntry 7 }
+
+mplsOutSegmentXCIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Index into mplsXCTable which identifies which cross-
+        connect entry this segment is part of.  A value of
+        the string containing the single octet 0x00
+        indicates that this entry is not referred
+        to by any cross-connect entry.  When a cross-connect
+        entry is created which this out-segment is a part of,
+        this object MUST be updated by the agent to reflect
+        the value of mplsXCIndex of that cross-connect
+        entry."
+   ::= { mplsOutSegmentEntry 8 }
+
+mplsOutSegmentOwner OBJECT-TYPE
+   SYNTAX        MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes the entity which created and is responsible
+        for managing this segment."
+   ::= { mplsOutSegmentEntry 9 }
+
+mplsOutSegmentTrafficParamPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "This variable represents a pointer to the traffic
+      parameter specification for this out-segment.  This
+      value may point at an entry in the
+      MplsTunnelResourceEntry in the MPLS-TE-STD-MIB (RFC3812)
+
+      RFC Editor: Please fill in RFC number.
+
+      to indicate which traffic parameter settings for this
+      segment if it represents an LSP used for a TE tunnel.
+
+      This value may optionally point at an
+      externally defined traffic parameter specification
+      table.  A value of zeroDotZero indicates best-effort
+      treatment.  By having the same value of this object,
+      two or more segments can indicate resource sharing
+
+      of such things as LSP queue space, etc.
+
+      This object cannot be modified if
+      mplsOutSegmentRowStatus is active(1).
+      For entries in this table that
+      are preserved after a re-boot, the agent MUST ensure
+      that their integrity be preserved, or this object should
+      be set to 0.0 if it cannot."
+   DEFVAL { zeroDotZero }
+   ::= { mplsOutSegmentEntry 10 }
+
+mplsOutSegmentRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        When a row in this table has a row in the active(1)
+        state, no objects in this row can be modified
+        except the mplsOutSegmentRowStatus or
+        mplsOutSegmentStorageType."
+   ::= { mplsOutSegmentEntry 11 }
+
+mplsOutSegmentStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. The agent MUST ensure that this object's value
+        remains consistent with the associated mplsXCEntry.
+        Conceptual rows having the value 'permanent'
+        need not allow write-access to any columnar
+        objects in the row."
+   DEFVAL { volatile }
+   ::= { mplsOutSegmentEntry 12 }
+
+-- End of mplsOutSegmentTable
+
+-- out-segment performance table.
+
+mplsOutSegmentPerfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsOutSegmentPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains statistical information about
+
+        outgoing segments from an LSR. The counters in this
+        entry should behave in a manner similar to that of
+        the interface."
+   ::= { mplsLsrObjects 8 }
+
+mplsOutSegmentPerfEntry  OBJECT-TYPE
+   SYNTAX        MplsOutSegmentPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table contains statistical
+        information about one outgoing segment configured in
+        mplsOutSegmentTable. The object
+        mplsOutSegmentPerfDiscontinuityTime indicates the
+        time of the last discontinuity in these objects. "
+   AUGMENTS      { mplsOutSegmentEntry }
+      ::= { mplsOutSegmentPerfTable 1 }
+
+MplsOutSegmentPerfEntry ::= SEQUENCE {
+      mplsOutSegmentPerfOctets             Counter32,
+      mplsOutSegmentPerfPackets            Counter32,
+      mplsOutSegmentPerfErrors             Counter32,
+      mplsOutSegmentPerfDiscards           Counter32,
+      -- HC counter
+      mplsOutSegmentPerfHCOctets           Counter64,
+      mplsOutSegmentPerfDiscontinuityTime  TimeStamp
+   }
+
+mplsOutSegmentPerfOctets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value contains the total number of octets sent
+        on this segment. It MUST be equal to the least
+        significant 32 bits of mplsOutSegmentPerfHCOctets
+        if mplsOutSegmentPerfHCOctets is supported according to
+        the rules spelled out in RFC2863."
+   ::= { mplsOutSegmentPerfEntry 1 }
+
+mplsOutSegmentPerfPackets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value contains the total number of packets sent
+
+        on this segment."
+   ::= { mplsOutSegmentPerfEntry 2 }
+
+mplsOutSegmentPerfErrors OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Number of packets that could not be sent due to
+        errors on this segment."
+   ::= { mplsOutSegmentPerfEntry 3 }
+
+mplsOutSegmentPerfDiscards OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The number of labeled packets attempted to be transmitted
+        on this out-segment, which were chosen to be discarded
+        even though no errors had been detected to prevent their
+        being transmitted. One possible reason for
+        discarding such a labeled packet could be to free up
+        buffer space."
+   ::= { mplsOutSegmentPerfEntry 4 }
+
+mplsOutSegmentPerfHCOctets OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Total number of octets sent.  This is the 64 bit
+        version of mplsOutSegmentPerfOctets,
+        if mplsOutSegmentPerfHCOctets is supported according to
+        the rules spelled out in RFC2863."
+   ::= { mplsOutSegmentPerfEntry 5 }
+
+mplsOutSegmentPerfDiscontinuityTime OBJECT-TYPE
+   SYNTAX      TimeStamp
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+       "The value of sysUpTime on the most recent occasion
+        at which any one or more of this segment's Counter32
+        or Counter64 suffered a discontinuity. If no such
+        discontinuities have occurred since the last re-
+        initialization of the local management subsystem,
+        then this object contains a zero value."
+   ::= { mplsOutSegmentPerfEntry 6 }
+
+-- End of mplsOutSegmentPerfTable.
+
+-- Cross-connect table.
+
+mplsXCIndexNext OBJECT-TYPE
+   SYNTAX        MplsIndexNextType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsXCIndex when creating entries in
+        the mplsXCTable. A special value of the zero length
+        string indicates that no more new entries can be created
+        in the relevant table.  Agents not allowing managers
+        to create entries in this table MUST set this value
+        to the zero length string."
+   ::= { mplsLsrObjects 9 }
+
+mplsXCTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsXCEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies information for switching
+        between LSP segments.  It supports point-to-point,
+        point-to-multipoint and multipoint-to-point
+        connections.  mplsLabelStackTable specifies the
+        label stack information for a cross-connect LSR and
+        is referred to from mplsXCTable."
+   ::= { mplsLsrObjects 10 }
+
+mplsXCEntry  OBJECT-TYPE
+   SYNTAX        MplsXCEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "A row in this table represents one cross-connect
+        entry.  It is indexed by the following objects:
+
+        - cross-connect index mplsXCIndex that uniquely
+          identifies a group of cross-connect entries
+
+        - in-segment index, mplsXCInSegmentIndex
+
+        - out-segment index, mplsXCOutSegmentIndex
+
+       LSPs originating at this LSR:
+        These are represented by using the special
+        of value of mplsXCInSegmentIndex set to the
+        string containing a single octet 0x00. In
+        this case the mplsXCOutSegmentIndex
+        MUST not be the string containing a single
+        octet 0x00.
+
+       LSPs terminating at this LSR:
+        These are represented by using the special value
+        mplsXCOutSegmentIndex set to the string containing
+        a single octet 0x00.
+
+       Special labels:
+        Entries indexed by the strings containing the
+        reserved MPLS label values as a single octet 0x00
+        through 0x0f (inclusive) imply LSPs terminating at
+        this LSR.  Note that situations where LSPs are
+        terminated with incoming label equal to the string
+        containing a single octet 0x00 can be distinguished
+        from LSPs originating at this LSR because the
+        mplsXCOutSegmentIndex equals the string containing the
+        single octet 0x00.
+
+        An entry can be created by a network administrator
+        or by an SNMP agent as instructed by an MPLS
+        signaling protocol."
+   INDEX { mplsXCIndex, mplsXCInSegmentIndex,
+           mplsXCOutSegmentIndex }
+   ::= { mplsXCTable 1 }
+
+MplsXCEntry ::= SEQUENCE {
+      mplsXCIndex                  MplsIndexType,
+      mplsXCInSegmentIndex         MplsIndexType,
+      mplsXCOutSegmentIndex        MplsIndexType,
+      mplsXCLspId                  MplsLSPID,
+      mplsXCLabelStackIndex        MplsIndexType,
+      mplsXCOwner                  MplsOwner ,
+      mplsXCRowStatus              RowStatus,
+      mplsXCStorageType            StorageType,
+      mplsXCAdminStatus            INTEGER,
+      mplsXCOperStatus             INTEGER
+   }
+
+mplsXCIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Primary index for the conceptual row identifying a
+        group of cross-connect segments. The string
+        containing a single octet 0x00 is an invalid index."
+   ::= { mplsXCEntry 1 }
+
+mplsXCInSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Incoming label index.
+        If this object is set to the string containing
+        a single octet 0x00, this indicates a special
+        case outlined in the table's description above.
+        In this case no corresponding mplsInSegmentEntry
+        shall exist."
+   ::= { mplsXCEntry 2 }
+
+mplsXCOutSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Index of out-segment for LSPs not terminating on
+        this LSR if not set to the string containing the
+        single octet 0x00. If the segment identified by this
+        entry is terminating, then this object MUST be set to
+        the string containing a single octet 0x00 to indicate
+        that no corresponding mplsOutSegmentEntry shall
+        exist."
+   ::= { mplsXCEntry 3 }
+
+mplsXCLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value identifies the label switched path that
+        this cross-connect entry belongs to. This object
+        cannot be modified if mplsXCRowStatus is active(1)
+        except for this object."
+   ::= { mplsXCEntry 4 }
+
+mplsXCLabelStackIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Primary index into mplsLabelStackTable identifying a
+        stack of labels to be pushed beneath the top label.
+        Note that the top label identified by the out-
+        segment ensures that all the components of a
+        multipoint-to-point connection have the same
+        outgoing label. A value of the string containing the
+        single octet 0x00 indicates that no labels are to
+        be stacked beneath the top label.
+        This object cannot be modified if mplsXCRowStatus is
+        active(1)."
+   ::= { mplsXCEntry 5 }
+
+mplsXCOwner OBJECT-TYPE
+   SYNTAX    MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes the entity that created and is responsible
+        for managing this cross-connect."
+   ::= { mplsXCEntry 6 }
+
+mplsXCRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        When a row in this table has a row in the active(1)
+        state, no objects in this row except this object
+        and the mplsXCStorageType can be modified. "
+   ::= { mplsXCEntry 7 }
+
+mplsXCStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. The agent MUST ensure that the associated in
+        and out segments also have the same StorageType value
+        and are restored consistently upon system restart.
+        This value SHOULD be set to permanent(4) if created
+        as a result of a static LSP configuration.
+
+        Conceptual rows having the value 'permanent'
+        need not allow write-access to any columnar
+        objects in the row."
+   DEFVAL { volatile }
+   ::= { mplsXCEntry 8 }
+
+mplsXCAdminStatus OBJECT-TYPE
+   SYNTAX   INTEGER {
+              up(1),     -- ready to pass packets
+              down(2),
+              testing(3) -- in some test mode
+      }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The desired operational status of this segment."
+   DEFVAL { up }
+   ::= { mplsXCEntry 9 }
+
+mplsXCOperStatus OBJECT-TYPE
+   SYNTAX   INTEGER {
+             up(1),            -- ready to pass packets
+             down(2),
+             testing(3),       -- in some test mode
+             unknown(4),       -- status cannot be determined
+                               -- for some reason.
+             dormant(5),
+             notPresent(6),    -- some component is missing
+             lowerLayerDown(7) -- down due to the state of
+                               -- lower layer interfaces
+      }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of this cross-
+        connect."
+   ::= { mplsXCEntry 10 }
+
+-- End of mplsXCTable
+
+-- Label stack table.
+
+mplsMaxLabelStackDepth  OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The maximum stack depth supported by this LSR."
+::= { mplsLsrObjects 11 }
+
+mplsLabelStackIndexNext  OBJECT-TYPE
+   SYNTAX        MplsIndexNextType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsLabelStackIndex when creating entries
+        in the mplsLabelStackTable. The special string
+        containing the single octet 0x00
+        indicates that no more new entries can be created
+        in the relevant table.  Agents not allowing managers
+        to create entries in this table MUST set this value
+        to the string containing the single octet 0x00."
+::= { mplsLsrObjects 12 }
+
+mplsLabelStackTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsLabelStackEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the label stack to be pushed
+        onto a packet, beneath the top label.  Entries into
+        this table are referred to from mplsXCTable."
+   ::= { mplsLsrObjects 13 }
+
+mplsLabelStackEntry OBJECT-TYPE
+   SYNTAX        MplsLabelStackEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one label which is
+        to be pushed onto an outgoing packet, beneath the
+        top label.  An entry can be created by a network
+        administrator or by an SNMP agent as instructed by
+        an MPLS signaling protocol."
+   INDEX { mplsLabelStackIndex, mplsLabelStackLabelIndex }
+   ::= { mplsLabelStackTable 1 }
+
+MplsLabelStackEntry ::= SEQUENCE {
+      mplsLabelStackIndex             MplsIndexType,
+      mplsLabelStackLabelIndex        Unsigned32,
+      mplsLabelStackLabel             MplsLabel,
+      mplsLabelStackLabelPtr          RowPointer,
+      mplsLabelStackRowStatus         RowStatus,
+      mplsLabelStackStorageType       StorageType
+   }
+
+mplsLabelStackIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Primary index for this row identifying a stack of
+        labels to be pushed on an outgoing packet, beneath
+        the top label. An index containing the string with
+        a single octet 0x00 MUST not be used."
+   ::= { mplsLabelStackEntry 1 }
+
+mplsLabelStackLabelIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Secondary index for this row identifying one label
+        of the stack.  Note that an entry with a smaller
+        mplsLabelStackLabelIndex would refer to a label
+        higher up the label stack and would be popped at a
+        downstream LSR before a label represented by a
+        higher mplsLabelStackLabelIndex at a downstream
+        LSR."
+   ::= { mplsLabelStackEntry 2 }
+
+mplsLabelStackLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The label to pushed."
+   ::= { mplsLabelStackEntry 3 }
+
+mplsLabelStackLabelPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If the label for this segment cannot be represented
+        fully within the mplsLabelStackLabel object,
+        this object MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsLabelStackLabel
+        object SHOULD be set to 0 and ignored. This object
+        MUST be set to zeroDotZero otherwise."
+   DEFVAL { zeroDotZero }
+   ::= { mplsLabelStackEntry 4 }
+
+mplsLabelStackRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        When a row in this table has a row in the active(1)
+        state, no objects in this row except this object
+        and the mplsLabelStackStorageType can be modified."
+   ::= { mplsLabelStackEntry 5 }
+
+mplsLabelStackStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. This object cannot be modified if
+        mplsLabelStackRowStatus is active(1).
+        No objects are required to be writable for
+        rows in this table with this object set to
+        permanent(4).
+
+        The agent MUST ensure that all related entries
+        in this table retain the same value for this
+        object.  Agents MUST ensure that the storage type
+        for all entries related to a particular mplsXCEntry
+        retain the same value for this object as the
+        mplsXCEntry's StorageType."
+   DEFVAL { volatile }
+   ::= { mplsLabelStackEntry 6 }
+
+-- End of mplsLabelStackTable
+
+-- Begin mplsInSegmentMapTable
+
+mplsInSegmentMapTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInSegmentMapEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the mapping from the
+        mplsInSegmentIndex to the corresponding
+        mplsInSegmentInterface and mplsInSegmentLabel
+        objects. The purpose of this table is to
+        provide the manager with an alternative
+        means by which to locate in-segments."
+   ::= { mplsLsrObjects 14 }
+
+mplsInSegmentMapEntry OBJECT-TYPE
+   SYNTAX        MplsInSegmentMapEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one interface
+        and incoming label pair.
+
+        In cases where the label cannot fit into the
+        mplsInSegmentLabel object, the mplsInSegmentLabelPtr
+        will indicate this by being set to the first accessible
+        column in the appropriate extension table's row,
+        and the mplsInSegmentLabel SHOULD be set to 0.
+        In all other cases when the label is
+        represented within the mplsInSegmentLabel object, the
+        mplsInSegmentLabelPtr MUST be 0.0.
+
+        Implementors need to be aware that if the value of
+        the mplsInSegmentMapLabelPtrIndex (an OID) has more
+        that 111 sub-identifiers, then OIDs of column
+        instances in this table will have more than 128
+        sub-identifiers and cannot be accessed using SNMPv1,
+        SNMPv2c, or SNMPv3."
+   INDEX { mplsInSegmentMapInterface,
+           mplsInSegmentMapLabel,
+           mplsInSegmentMapLabelPtrIndex }
+   ::= { mplsInSegmentMapTable 1 }
+
+MplsInSegmentMapEntry ::= SEQUENCE {
+      mplsInSegmentMapInterface      InterfaceIndexOrZero,
+      mplsInSegmentMapLabel          MplsLabel,
+      mplsInSegmentMapLabelPtrIndex  RowPointer,
+      mplsInSegmentMapIndex          MplsIndexType
+   }
+
+mplsInSegmentMapInterface OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This index contains the same value as the
+        mplsInSegmentIndex in the mplsInSegmentTable."
+   ::= { mplsInSegmentMapEntry 1 }
+
+mplsInSegmentMapLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This index contains the same value as the
+        mplsInSegmentLabel in the mplsInSegmentTable."
+   ::= { mplsInSegmentMapEntry 2 }
+
+mplsInSegmentMapLabelPtrIndex OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This index contains the same value as the
+        mplsInSegmentLabelPtr.
+
+        If the label for the InSegment cannot be represented
+        fully within the mplsInSegmentLabel object,
+        this index MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsInSegmentTopLabel
+        object SHOULD be set to 0 and ignored. This object MUST
+        be set to zeroDotZero otherwise."
+   ::= { mplsInSegmentMapEntry 3 }
+
+mplsInSegmentMapIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The mplsInSegmentIndex that corresponds
+        to the mplsInSegmentInterface and
+        mplsInSegmentLabel, or the mplsInSegmentInterface
+        and mplsInSegmentLabelPtr, if applicable.
+        The string containing the single octet 0x00
+        MUST not be returned."
+   ::= { mplsInSegmentMapEntry 4 }
+
+-- End mplsInSegmentMapTable
+
+-- Notification Configuration
+
+mplsXCNotificationsEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is set to true(1), then it enables
+        the emission of mplsXCUp and mplsXCDown
+        notifications; otherwise these notifications are not
+
+        emitted."
+   REFERENCE
+       "See also RFC3413 for explanation that
+        notifications are under the ultimate control of the
+        MIB module in this document."
+   DEFVAL { false }
+   ::= { mplsLsrObjects 15 }
+
+-- Cross-connect.
+
+mplsXCUp NOTIFICATION-TYPE
+   OBJECTS     { mplsXCOperStatus,  -- start of range
+                 mplsXCOperStatus   -- end of range
+   }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the
+        mplsXCOperStatus object for one or more contiguous
+        entries in mplsXCTable are about to enter the up(1)
+        state from some other state. The included values of
+        mplsXCOperStatus MUST both be set equal to this
+        new state (i.e: up(1)).  The two instances of
+        mplsXCOperStatus in this notification indicate the range
+        of indexes that are affected.  Note that all the indexes
+        of the two ends of the range can be derived from the
+        instance identifiers of these two objects.  For
+        cases where a contiguous range of cross-connects
+        have transitioned into the up(1) state at roughly
+        the same time, the device SHOULD issue a single
+        notification for each range of contiguous indexes in
+        an effort to minimize the emission of a large number
+        of notifications.  If a notification has to be
+        issued for just a single cross-connect entry, then
+        the instance identifier (and values) of the two
+        mplsXCOperStatus objects MUST be the identical."
+   ::= { mplsLsrNotifications 1 }
+
+mplsXCDown NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsXCOperStatus,  -- start of range
+      mplsXCOperStatus   -- end of range
+   }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the
+        mplsXCOperStatus object for one or more contiguous
+        entries in mplsXCTable are about to enter the
+        down(2) state from some other state. The included values
+
+        of mplsXCOperStatus MUST both be set equal to this
+        down(2) state.  The two instances of mplsXCOperStatus
+        in this notification indicate the range of indexes
+        that are affected.  Note that all the indexes of the
+        two ends of the range can be derived from the
+        instance identifiers of these two objects.  For
+        cases where a contiguous range of cross-connects
+        have transitioned into the down(2) state at roughly
+        the same time, the device SHOULD issue a single
+        notification for each range of contiguous indexes in
+        an effort to minimize the emission of a large number
+        of notifications.  If a notification has to be
+        issued for just a single cross-connect entry, then
+        the instance identifier (and values) of the two
+        mplsXCOperStatus objects MUST be identical."
+   ::= { mplsLsrNotifications 2 }
+
+-- End of notifications.
+
+-- Module compliance.
+
+mplsLsrGroups
+   OBJECT IDENTIFIER ::= { mplsLsrConformance 1 }
+
+mplsLsrCompliances
+   OBJECT IDENTIFIER ::= { mplsLsrConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+
+mplsLsrModuleFullCompliance MODULE-COMPLIANCE
+   STATUS       current
+   DESCRIPTION "Compliance statement for agents that provide full
+                support for MPLS-LSR-STD-MIB. Such devices can
+                then be monitored and also be configured using
+                this MIB module."
+
+   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
+   MANDATORY-GROUPS {
+      ifGeneralInformationGroup,
+      ifCounterDiscontinuityGroup
+   }
+
+   MODULE -- This module.
+   MANDATORY-GROUPS {
+         mplsInterfaceGroup,
+         mplsInSegmentGroup,
+         mplsOutSegmentGroup,
+         mplsXCGroup,
+         mplsPerfGroup
+   }
+
+   GROUP        mplsLabelStackGroup
+   DESCRIPTION "This group is only mandatory for LSRs that wish to
+                support the modification of LSP label stacks.
+               "
+
+   GROUP        mplsHCInSegmentPerfGroup
+   DESCRIPTION "This group is mandatory for those in-segment entries
+                for which the object mplsInSegmentOutOctets wraps
+                around too quickly based on the criteria specified in
+                RFC 2863 for high-capacity counters.
+               "
+
+   GROUP        mplsHCOutSegmentPerfGroup
+   DESCRIPTION "This group is mandatory for those out-segment entries
+                for which the object mplsOutSegmentPerfOctets wraps
+                around too quickly based on the criteria specified in
+                RFC 2863 for high-capacity counters.
+               "
+
+   GROUP        mplsLsrNotificationGroup
+   DESCRIPTION "This group is only mandatory for those implementations
+                which can efficiently implement the notifications
+                contained in this group."
+
+   OBJECT       mplsInSegmentRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is
+                not required."
+
+   OBJECT       mplsOutSegmentNextHopAddrType
+   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
+                is required."
+
+   OBJECT       mplsOutSegmentNextHopAddr
+   SYNTAX       InetAddress (SIZE(0|4|16))
+   DESCRIPTION "An implementation is only required to support
+                unknown(0), ipv4(1) and ipv6(2) sizes."
+
+   OBJECT       mplsOutSegmentRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is not
+                required."
+
+   OBJECT       mplsLabelStackRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is not
+                required."
+
+   OBJECT       mplsXCRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is not
+                required."
+   ::= { mplsLsrCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+
+mplsLsrModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS       current
+   DESCRIPTION "Compliance requirement for implementations that only
+                provide read-only support for MPLS-LSR-STD-MIB. Such
+                devices can then be monitored but cannot be configured
+                using this MIB module.
+               "
+
+   MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
+   MANDATORY-GROUPS {
+      ifGeneralInformationGroup,
+      ifCounterDiscontinuityGroup
+   }
+
+   MODULE -- This module
+   MANDATORY-GROUPS {
+         mplsInterfaceGroup,
+         mplsInSegmentGroup,
+         mplsOutSegmentGroup,
+         mplsXCGroup,
+         mplsPerfGroup
+     }
+
+   GROUP        mplsLabelStackGroup
+   DESCRIPTION "This group is only mandatory for LSRs that wish to
+                support the modification of LSP label stacks.
+               "
+
+   GROUP        mplsHCInSegmentPerfGroup
+   DESCRIPTION "This group is mandatory for those in-segment entries
+                for which the object mplsInSegmentOutOctets wraps
+                around too quickly based on the criteria specified in
+                RFC 2863 for high-capacity counters.
+               "
+
+   GROUP        mplsHCOutSegmentPerfGroup
+   DESCRIPTION "This group is mandatory for those out-segment entries
+                for which the object mplsOutSegmentPerfOctets wraps
+                around too quickly based on the criteria specified in
+                RFC 2863 for high-capacity counters.
+               "
+
+   GROUP        mplsLsrNotificationGroup
+   DESCRIPTION "This group is only mandatory for those implementations
+                which can efficiently implement the notifications
+                contained in this group.
+               "
+
+   -- mplsInSegmentTable
+   OBJECT       mplsInSegmentLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsInSegmentLabelPtr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsInSegmentNPop
+   SYNTAX       Integer32 (1..1)
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  This object
+                SHOULD be set to 1 if it is read-only.
+               "
+
+   OBJECT       mplsInSegmentAddrFamily
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  A value of other(0)
+                should be supported because there may be cases where
+                the agent may not know about or support any address
+                types.
+               "
+
+   OBJECT       mplsInSegmentRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsInSegmentStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   -- mplsOutSegmentTable
+   OBJECT       mplsOutSegmentInterface
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentPushTopLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentTopLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentTopLabelPtr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentNextHopAddrType
+   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  Only unknown(0),
+                ipv4(1) and ipv6(2) support is required.
+               "
+
+   OBJECT       mplsOutSegmentNextHopAddr
+   SYNTAX       InetAddress (SIZE(0|4|16))
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required. An implementation is
+                only required to support unknown(0), ipv4(1) and
+                ipv6(2) sizes."
+
+   OBJECT       mplsOutSegmentRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   -- mplsXCTable
+   OBJECT       mplsXCLabelStackIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsXCAdminStatus
+   MIN-ACCESS   read-only
+   DESCRIPTION "Read only support is required."
+
+   OBJECT       mplsXCRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsXCStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackLabelPtr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackRowStatus
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+   ::= { mplsLsrCompliances 2 }
+
+-- Units of conformance.
+
+mplsInterfaceGroup OBJECT-GROUP
+   OBJECTS {
+      mplsInterfaceLabelMinIn,
+      mplsInterfaceLabelMaxIn,
+      mplsInterfaceLabelMinOut,
+      mplsInterfaceLabelMaxOut,
+      mplsInterfaceTotalBandwidth,
+      mplsInterfaceAvailableBandwidth,
+      mplsInterfaceLabelParticipationType
+   }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for MPLS interface
+           and interface performance information."
+   ::= { mplsLsrGroups 1 }
+
+mplsInSegmentGroup  OBJECT-GROUP
+   OBJECTS {
+      mplsInSegmentIndexNext,
+      mplsInSegmentInterface,
+      mplsInSegmentLabel,
+      mplsInSegmentLabelPtr,
+      mplsInSegmentNPop,
+      mplsInSegmentAddrFamily,
+      mplsInSegmentXCIndex,
+      mplsInSegmentOwner,
+      mplsInSegmentRowStatus,
+      mplsInSegmentStorageType,
+      mplsInSegmentTrafficParamPtr,
+      mplsInSegmentMapIndex
+   }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed to implement an in-
+           segment."
+   ::= { mplsLsrGroups 2 }
+
+mplsOutSegmentGroup  OBJECT-GROUP
+   OBJECTS {
+      mplsOutSegmentIndexNext,
+      mplsOutSegmentInterface,
+      mplsOutSegmentPushTopLabel,
+      mplsOutSegmentTopLabel,
+      mplsOutSegmentTopLabelPtr,
+      mplsOutSegmentNextHopAddrType,
+      mplsOutSegmentNextHopAddr,
+      mplsOutSegmentXCIndex,
+      mplsOutSegmentOwner,
+      mplsOutSegmentPerfOctets,
+      mplsOutSegmentPerfDiscards,
+      mplsOutSegmentPerfErrors,
+      mplsOutSegmentRowStatus,
+      mplsOutSegmentStorageType,
+      mplsOutSegmentTrafficParamPtr
+   }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed to implement an out-
+
+           segment."
+   ::= { mplsLsrGroups 3 }
+
+mplsXCGroup  OBJECT-GROUP
+   OBJECTS {
+      mplsXCIndexNext,
+      mplsXCLspId,
+      mplsXCLabelStackIndex,
+      mplsXCOwner,
+      mplsXCStorageType,
+      mplsXCAdminStatus,
+      mplsXCOperStatus,
+      mplsXCRowStatus,
+      mplsXCNotificationsEnable
+   }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed to implement a
+           cross-connect entry."
+   ::= { mplsLsrGroups 4 }
+
+mplsPerfGroup OBJECT-GROUP
+   OBJECTS {
+      mplsInSegmentPerfOctets,
+      mplsInSegmentPerfPackets,
+      mplsInSegmentPerfErrors,
+      mplsInSegmentPerfDiscards,
+      mplsInSegmentPerfDiscontinuityTime,
+      mplsOutSegmentPerfOctets,
+      mplsOutSegmentPerfPackets,
+      mplsOutSegmentPerfDiscards,
+      mplsOutSegmentPerfDiscontinuityTime,
+      mplsInterfacePerfInLabelsInUse,
+      mplsInterfacePerfInLabelLookupFailures,
+      mplsInterfacePerfOutFragmentedPkts,
+      mplsInterfacePerfOutLabelsInUse
+   }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects providing performance
+           information
+        about an LSR."
+   ::= { mplsLsrGroups 5 }
+
+mplsHCInSegmentPerfGroup OBJECT-GROUP
+   OBJECTS { mplsInSegmentPerfHCOctets }
+   STATUS  current
+   DESCRIPTION
+          "Object(s) providing performance information
+           specific to out-segments for which the object
+           mplsInterfaceInOctets wraps around too quickly."
+   ::= { mplsLsrGroups 6 }
+
+mplsHCOutSegmentPerfGroup OBJECT-GROUP
+   OBJECTS { mplsOutSegmentPerfHCOctets }
+   STATUS  current
+   DESCRIPTION
+          "Object(s) providing performance information
+           specific to out-segments for which the object
+           mplsInterfaceOutOctets wraps around too
+           quickly."
+   ::= { mplsLsrGroups 7 }
+
+mplsLabelStackGroup OBJECT-GROUP
+   OBJECTS {
+      mplsLabelStackLabel,
+      mplsLabelStackLabelPtr,
+      mplsLabelStackRowStatus,
+      mplsLabelStackStorageType,
+      mplsMaxLabelStackDepth,
+      mplsLabelStackIndexNext
+   }
+   STATUS current
+   DESCRIPTION
+          "Objects needed to support label stacking."
+      ::= { mplsLsrGroups 8 }
+
+mplsLsrNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+      mplsXCUp,
+      mplsXCDown
+   }
+   STATUS  current
+   DESCRIPTION
+          "Set of notifications implemented in this
+           module."
+   ::= { mplsLsrGroups 9 }
+END
diff --git a/snmp_builder/mibs/MPLS-TC-STD-MIB.mib b/snmp_builder/mibs/MPLS-TC-STD-MIB.mib
new file mode 100644
index 0000000..0e5a417
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-TC-STD-MIB.mib
@@ -0,0 +1,635 @@
+MPLS-TC-STD-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+
+       MODULE-IDENTITY,
+       Unsigned32, Integer32,
+       transmission           FROM SNMPv2-SMI            -- [RFC2578]
+
+       TEXTUAL-CONVENTION
+          FROM SNMPv2-TC;                                -- [RFC2579]
+
+    mplsTCStdMIB MODULE-IDENTITY
+       LAST-UPDATED "200406030000Z" -- June 3, 2004
+       ORGANIZATION
+          "IETF Multiprotocol Label Switching (MPLS) Working
+           Group."
+       CONTACT-INFO
+            "        Thomas D. Nadeau
+
+                     Cisco Systems, Inc.
+                     tnadeau@cisco.com
+
+                     Joan Cucchiara
+                     Marconi Communications, Inc.
+                     jcucchiara@mindspring.com
+
+                     Cheenu Srinivasan
+                     Bloomberg L.P.
+                     cheenu@bloomberg.net
+
+                     Arun Viswanathan
+                     Force10 Networks, Inc.
+                     arunv@force10networks.com
+
+                     Hans Sjostrand
+                     ipUnplugged
+                     hans@ipunplugged.com
+
+                     Kireeti Kompella
+                     Juniper Networks
+                     kireeti@juniper.net
+
+          Email comments to the MPLS WG Mailing List at
+          mpls@uu.net."
+       DESCRIPTION
+           "Copyright (C) The Internet Society (2004). The
+           initial version of this MIB module was published
+           in RFC 3811. For full legal notices see the RFC
+           itself or see:
+           http://www.ietf.org/copyrights/ianamib.html
+
+           This MIB module defines TEXTUAL-CONVENTIONs
+           for concepts used in Multiprotocol Label
+           Switching (MPLS) networks."
+
+       REVISION "200406030000Z" -- June 3, 2004
+       DESCRIPTION
+          "Initial version published as part of RFC 3811."
+        ::= { mplsStdMIB 1 }
+
+    mplsStdMIB OBJECT IDENTIFIER
+    ::= { transmission 166 }
+
+    MplsAtmVcIdentifier ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS  current
+       DESCRIPTION
+          "A Label Switching Router (LSR) that
+           creates LDP sessions on ATM interfaces
+           uses the VCI or VPI/VCI field to hold the
+           LDP Label.
+
+           VCI values MUST NOT be in the 0-31 range.
+           The values 0 to 31 are reserved for other uses
+           by the ITU and ATM Forum.  The value
+           of 32 can only be used for the Control VC,
+           although values greater than 32 could be
+           configured for the Control VC.
+
+           If a value from 0 to 31 is used for a VCI
+           the management entity controlling the LDP
+           subsystem should reject this with an
+           inconsistentValue error.  Also, if
+           the value of 32 is used for a VC which is
+           NOT the Control VC, this should
+           result in an inconsistentValue error."
+       REFERENCE
+          "MPLS using LDP and ATM VC Switching, RFC3035."
+       SYNTAX  Integer32 (32..65535)
+
+    MplsBitRate ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS      current
+       DESCRIPTION
+          "If the value of this object is greater than zero,
+           then this represents the bandwidth of this MPLS
+           interface (or Label Switched Path) in units of
+           '1,000 bits per second'.
+
+           The value, when greater than zero, represents the
+           bandwidth of this MPLS interface (rounded to the
+           nearest 1,000) in units of 1,000 bits per second.
+           If the bandwidth of the MPLS interface is between
+           ((n * 1000) - 500) and ((n * 1000) + 499), the value
+           of this object is n, such that n > 0.
+
+           If the value of this object is 0 (zero), this
+           means that the traffic over this MPLS interface is
+           considered to be best effort."
+       SYNTAX  Unsigned32 (0|1..4294967295)
+
+    MplsBurstSize ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS      current
+       DESCRIPTION
+          "The number of octets of MPLS data that the stream
+           may send back-to-back without concern for policing.
+           The value of zero indicates that an implementation
+           does not support Burst Size."
+       SYNTAX  Unsigned32 (0..4294967295)
+
+    MplsExtendedTunnelId ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique identifier for an MPLS Tunnel.  This may
+           represent an IPv4 address of the ingress or egress
+           LSR for the tunnel.  This value is derived from the
+           Extended Tunnel Id in RSVP or the Ingress Router ID
+           for CR-LDP."
+       REFERENCE
+          "RSVP-TE: Extensions to RSVP for LSP Tunnels,
+           [RFC3209].
+
+           Constraint-Based LSP Setup using LDP, [RFC3212]."
+       SYNTAX  Unsigned32(0..4294967295)
+
+    MplsLabel ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "This value represents an MPLS label as defined in
+           [RFC3031],  [RFC3032], [RFC3034], [RFC3035] and
+           [RFC3471].
+
+           The label contents are specific to the label being
+           represented, such as:
+
+           * The label carried in an MPLS shim header
+             (for LDP this is the Generic Label) is a 20-bit
+             number represented by 4 octets.  Bits 0-19 contain
+             a label or a reserved label value.  Bits 20-31
+             MUST be zero.
+
+             The following is quoted directly from [RFC3032].
+             There are several reserved label values:
+
+                i. A value of 0 represents the
+                   'IPv4 Explicit NULL Label'.  This label
+                   value is only legal at the bottom of the
+                   label stack.  It indicates that the label
+                   stack must be popped, and the forwarding
+                   of the packet must then be based on the
+
+                   IPv4 header.
+
+               ii. A value of 1 represents the
+                   'Router Alert Label'.  This label value is
+                   legal anywhere in the label stack except at
+                   the bottom.  When a received packet
+                   contains this label value at the top of
+                   the label stack, it is delivered to a
+                   local software module for processing.
+                   The actual forwarding of the packet
+                   is determined by the label beneath it
+                   in the stack.  However, if the packet is
+                   forwarded further, the Router Alert Label
+                   should be pushed back onto the label stack
+                   before forwarding.  The use of this label
+                   is analogous to the use of the
+                   'Router Alert Option' in IP packets
+                   [RFC2113].  Since this label
+                   cannot occur at the bottom of the stack,
+                   it is not associated with a
+                   particular network layer protocol.
+
+              iii. A value of 2 represents the
+                   'IPv6 Explicit NULL Label'.  This label
+                   value is only legal at the bottom of the
+                   label stack.  It indicates that the label
+                   stack must be popped, and the forwarding
+                   of the packet must then be based on the
+                   IPv6 header.
+
+               iv. A value of 3 represents the
+                   'Implicit NULL Label'.
+                   This is a label that an LSR may assign and
+                   distribute, but which never actually
+                   appears in the encapsulation.  When an
+                   LSR would otherwise replace the label
+                   at the top of the stack with a new label,
+                   but the new label is 'Implicit NULL',
+                   the LSR will pop the stack instead of
+                   doing the replacement.  Although
+                   this value may never appear in the
+                   encapsulation, it needs to be specified in
+                   the Label Distribution Protocol, so a value
+                   is reserved.
+
+                v. Values 4-15 are reserved.
+
+           * The frame relay label can be either 10-bits or
+
+             23-bits depending on the DLCI field size and the
+             upper 22-bits or upper 9-bits must be zero,
+             respectively.
+
+           * For an ATM label the lower 16-bits represents the
+             VCI, the next 12-bits represents the VPI and the
+             remaining bits MUST be zero.
+
+           * The Generalized-MPLS (GMPLS) label contains a
+             value greater than 2^24-1 and used in GMPLS
+             as defined in [RFC3471]."
+       REFERENCE
+          "Multiprotocol Label Switching Architecture,
+           RFC3031.
+
+           MPLS Label Stack Encoding, [RFC3032].
+
+           Use of Label Switching on Frame Relay Networks,
+           RFC3034.
+
+           MPLS using LDP and ATM VC Switching, RFC3035.
+           Generalized Multiprotocol Label Switching
+           (GMPLS) Architecture, [RFC3471]."
+       SYNTAX  Unsigned32 (0..4294967295)
+
+    MplsLabelDistributionMethod ::= TEXTUAL-CONVENTION
+       STATUS  current
+       DESCRIPTION
+          "The label distribution method which is also called
+           the label advertisement mode [RFC3036].
+           Each interface on an LSR is configured to operate
+           in either Downstream Unsolicited or Downstream
+           on Demand."
+       REFERENCE
+          "Multiprotocol Label Switching Architecture,
+           RFC3031.
+
+           LDP Specification, RFC3036, Section 2.6.3."
+       SYNTAX INTEGER {
+                  downstreamOnDemand(1),
+                  downstreamUnsolicited(2)
+              }
+
+    MplsLdpIdentifier ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "1d.1d.1d.1d:2d"
+       STATUS      current
+       DESCRIPTION
+          "The LDP identifier is a six octet
+
+           quantity which is used to identify a
+           Label Switching Router (LSR) label space.
+
+           The first four octets identify the LSR and
+           must be a globally unique value, such as a
+           32-bit router ID assigned to the LSR, and the
+           last two octets identify a specific label
+           space within the LSR."
+       SYNTAX  OCTET STRING (SIZE (6))
+
+    MplsLsrIdentifier ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "The Label Switching Router (LSR) identifier is the
+           first 4 bytes of the Label Distribution Protocol
+           (LDP) identifier."
+       SYNTAX  OCTET STRING (SIZE (4))
+    MplsLdpLabelType ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "The Layer 2 label types which are defined for MPLS
+           LDP and/or CR-LDP are generic(1), atm(2), or
+           frameRelay(3)."
+       SYNTAX  INTEGER {
+                 generic(1),
+                 atm(2),
+                 frameRelay(3)
+             }
+
+    MplsLSPID ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique identifier within an MPLS network that is
+           assigned to each LSP.  This is assigned at the head
+           end of the LSP and can be used by all LSRs
+           to identify this LSP.  This value is piggybacked by
+           the signaling protocol when this LSP is signaled
+           within the network.  This identifier can then be
+           used at each LSR to identify which labels are
+           being swapped to other labels for this LSP.  This
+           object  can also be used to disambiguate LSPs that
+           share the same RSVP sessions between the same
+           source and destination.
+
+           For LSPs established using CR-LDP, the LSPID is
+           composed of the ingress LSR Router ID (or any of
+           its own IPv4 addresses) and a locally unique
+           CR-LSP ID to that LSR.  The first two bytes carry
+
+           the CR-LSPID, and the remaining 4 bytes carry
+           the Router ID.  The LSPID is useful in network
+           management, in CR-LSP repair, and in using
+           an already established CR-LSP as a hop in
+           an ER-TLV.
+
+           For LSPs signaled using RSVP-TE, the LSP ID is
+           defined as a 16-bit (2 byte) identifier used
+           in the SENDER_TEMPLATE and the FILTER_SPEC
+           that can be changed to allow a sender to
+           share resources with itself.  The length of this
+           object should only be 2 or 6 bytes.  If the length
+           of this octet string is 2 bytes, then it must
+           identify an RSVP-TE LSPID, or it is 6 bytes,
+           it must contain a CR-LDP LSPID."
+       REFERENCE
+          "RSVP-TE:  Extensions to RSVP for LSP Tunnels,
+           [RFC3209].
+
+           Constraint-Based LSP Setup using LDP,
+           [RFC3212]."
+       SYNTAX  OCTET STRING (SIZE (2|6))
+
+    MplsLspType ::= TEXTUAL-CONVENTION
+       STATUS  current
+       DESCRIPTION
+          "Types of Label Switch Paths (LSPs)
+           on a Label Switching Router (LSR) or a
+           Label Edge Router (LER) are:
+
+              unknown(1)         -- if the LSP is not known
+                                    to be one of the following.
+
+              terminatingLsp(2)  -- if the LSP terminates
+                                    on the LSR/LER, then this
+                                    is an egressing LSP
+                                    which ends on the LSR/LER,
+              originatingLsp(3)  -- if the LSP originates
+                                    from this LSR/LER, then
+                                    this is an ingressing LSP
+                                    which is the head-end of
+                                    the LSP,
+           crossConnectingLsp(4) -- if the LSP ingresses
+                                    and egresses on the LSR,
+                                    then it is
+                                    cross-connecting on that
+
+                                    LSR."
+       SYNTAX INTEGER {
+                  unknown(1),
+                  terminatingLsp(2),
+                  originatingLsp(3),
+                  crossConnectingLsp(4)
+              }
+
+    MplsOwner ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "This object indicates the local network
+           management subsystem that originally created
+           the object(s) in question.  The values of
+           this enumeration are defined as follows:
+
+           unknown(1) - the local network management
+           subsystem cannot discern which
+           component created the object.
+
+           other(2) - the local network management
+           subsystem is able to discern which component
+           created the object, but the component is not
+           listed within the following choices,
+           e.g., command line interface (cli).
+
+           snmp(3) - The Simple Network Management Protocol
+           was used to configure this object initially.
+
+           ldp(4) - The Label Distribution Protocol was
+           used to configure this object initially.
+
+           crldp(5) - The Constraint-Based Label Distribution
+           Protocol was used to configure this object
+           initially.
+
+           rsvpTe(6) - The Resource Reservation Protocol was
+           used to configure this object initially.
+
+           policyAgent(7) - A policy agent (perhaps in
+           combination with one of the above protocols) was
+           used to configure this object initially.
+
+           An object created by any of the above choices
+           MAY be modified or destroyed by the same or a
+           different choice."
+       SYNTAX  INTEGER {
+                 unknown(1),
+                 other(2),
+                 snmp(3),
+                 ldp(4),
+                 crldp(5),
+                 rsvpTe(6),
+                 policyAgent(7)
+             }
+
+    MplsPathIndexOrZero ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+          "A unique identifier used to identify a specific
+           path used by a tunnel.  A value of 0 (zero) means
+           that no path is in use."
+       SYNTAX  Unsigned32(0..4294967295)
+
+    MplsPathIndex ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique value to index (by Path number) an
+           entry in a table."
+       SYNTAX  Unsigned32(1..4294967295)
+
+    MplsRetentionMode ::= TEXTUAL-CONVENTION
+       STATUS  current
+       DESCRIPTION
+          "The label retention mode which specifies whether
+           an LSR maintains a label binding for a FEC
+           learned from a neighbor that is not its next hop
+           for the FEC.
+
+           If the value is conservative(1) then advertised
+           label mappings are retained only if they will be
+           used to forward packets, i.e., if label came from
+           a valid next hop.
+
+           If the value is liberal(2) then all advertised
+           label mappings are retained whether they are from
+           a valid next hop or not."
+       REFERENCE
+          "Multiprotocol Label Switching Architecture,
+           RFC3031.
+
+           LDP Specification, RFC3036, Section 2.6.2."
+       SYNTAX INTEGER {
+                  conservative(1),
+                  liberal(2)
+              }
+
+    MplsTunnelAffinity ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "Describes the configured 32-bit Include-any,
+           include-all, or exclude-all constraint for
+           constraint-based link selection."
+       REFERENCE
+          "RSVP-TE:  Extensions to RSVP for LSP Tunnels,
+           RFC3209, Section 4.7.4."
+       SYNTAX  Unsigned32(0..4294967295)
+
+    MplsTunnelIndex ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique index into mplsTunnelTable.
+           For tunnels signaled using RSVP, this value
+           should correspond to the RSVP Tunnel ID
+           used for the RSVP-TE session."
+       SYNTAX  Unsigned32 (0..65535)
+
+    MplsTunnelInstanceIndex ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "The tunnel entry with instance index 0
+           should refer to the configured tunnel
+           interface (if one exists).
+
+           Values greater than 0, but less than or
+           equal to 65535, should be used to indicate
+           signaled (or backup) tunnel LSP instances.
+           For tunnel LSPs signaled using RSVP,
+           this value should correspond to the
+           RSVP LSP ID used for the RSVP-TE
+           LSP.
+
+           Values greater than 65535 apply to FRR
+           detour instances."
+       SYNTAX  Unsigned32(0|1..65535|65536..4294967295)
+
+    TeHopAddressType ::= TEXTUAL-CONVENTION
+       STATUS     current
+       DESCRIPTION
+          "A value that represents a type of address for a
+           Traffic Engineered (TE) Tunnel hop.
+
+           unknown(0)   An unknown address type.  This value
+                        MUST be used if the value of the
+                        corresponding TeHopAddress object is a
+
+                        zero-length string.  It may also be
+                        used to indicate a TeHopAddress which
+                        is not in one of the formats defined
+                        below.
+
+           ipv4(1)      An IPv4 network address as defined by
+                        the InetAddressIPv4 TEXTUAL-CONVENTION
+                        [RFC3291].
+
+           ipv6(2)      A global IPv6 address as defined by
+                        the InetAddressIPv6 TEXTUAL-CONVENTION
+                        [RFC3291].
+
+           asnumber(3)  An Autonomous System (AS) number as
+                        defined by the TeHopAddressAS
+                        TEXTUAL-CONVENTION.
+
+           unnum(4)     An unnumbered interface index as
+                        defined by the TeHopAddressUnnum
+                        TEXTUAL-CONVENTION.
+
+           lspid(5)     An LSP ID for TE Tunnels
+                        (RFC3212) as defined by the
+                        MplsLSPID TEXTUAL-CONVENTION.
+
+           Each definition of a concrete TeHopAddressType
+           value must be accompanied by a definition
+           of a TEXTUAL-CONVENTION for use with that
+           TeHopAddress.
+
+           To support future extensions, the TeHopAddressType
+           TEXTUAL-CONVENTION SHOULD NOT be sub-typed in
+           object type definitions.  It MAY be sub-typed in
+           compliance statements in order to require only a
+           subset of these address types for a compliant
+           implementation.
+
+           Implementations must ensure that TeHopAddressType
+           objects and any dependent objects
+           (e.g., TeHopAddress objects) are consistent.
+           An inconsistentValue error must be generated
+           if an attempt to change a TeHopAddressType
+           object would, for example, lead to an
+           undefined TeHopAddress value that is
+           not defined herein.  In particular,
+           TeHopAddressType/TeHopAddress pairs
+           must be changed together if the address
+           type changes (e.g., from ipv6(2) to ipv4(1))."
+       REFERENCE
+          "TEXTUAL-CONVENTIONs for Internet Network
+           Addresses, RFC3291.
+
+           Constraint-Based LSP Setup using LDP,
+           [RFC3212]"
+       SYNTAX     INTEGER {
+                     unknown(0),
+                     ipv4(1),
+                     ipv6(2),
+                     asnumber(3),
+                     unnum(4),
+                     lspid(5)
+                  }
+
+    TeHopAddress ::= TEXTUAL-CONVENTION
+       STATUS     current
+       DESCRIPTION
+          "Denotes a generic Tunnel hop address,
+           that is, the address of a node which
+           an LSP traverses, including the source
+           and destination nodes.  An address may be
+           very concrete, for example, an IPv4 host
+           address (i.e., with prefix length 32);
+           if this IPv4 address is an interface
+           address, then that particular interface
+           must be traversed.  An address may also
+           specify an 'abstract node', for example,
+           an IPv4 address with prefix length
+           less than 32, in which case, the LSP
+           can traverse any node whose address
+           falls in that range.  An address may
+           also specify an Autonomous System (AS),
+           in which  case the LSP can traverse any
+           node that falls within that AS.
+
+           A TeHopAddress value is always interpreted within
+           the context of an TeHopAddressType value.  Every
+           usage of the TeHopAddress TEXTUAL-CONVENTION
+           is required to specify the TeHopAddressType object
+           which provides the context.  It is suggested that
+           the TeHopAddressType object is logically registered
+           before the object(s) which use the TeHopAddress
+           TEXTUAL-CONVENTION if they appear in the
+           same logical row.
+
+           The value of a TeHopAddress object must always be
+
+           consistent with the value of the associated
+           TeHopAddressType object.  Attempts to set a
+           TeHopAddress object to a value which is
+           inconsistent with the associated TeHopAddressType
+           must fail with an inconsistentValue error."
+       SYNTAX     OCTET STRING (SIZE (0..32))
+
+    TeHopAddressAS ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "Represents a two or four octet AS number.
+           The AS number is represented in network byte
+           order (MSB first).  A two-octet AS number has
+           the two MSB octets set to zero."
+       REFERENCE
+          "Textual Conventions for Internet Network
+           Addresses, [RFC3291].  The
+           InetAutonomousSystemsNumber TEXTUAL-CONVENTION
+           has a SYNTAX of Unsigned32, whereas this TC
+           has a SYNTAX of OCTET STRING (SIZE (4)).
+           Both TCs represent an autonomous system number
+           but use different syntaxes to do so."
+       SYNTAX      OCTET STRING (SIZE (4))
+
+    TeHopAddressUnnum ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "Represents an unnumbered interface:
+
+           octets   contents               encoding
+            1-4     unnumbered interface   network-byte order
+
+           The corresponding TeHopAddressType value is
+           unnum(5)."
+       SYNTAX      OCTET STRING(SIZE(4))
+
+END
diff --git a/snmp_builder/mibs/MPLS-TE-STD-MIB.mib b/snmp_builder/mibs/MPLS-TE-STD-MIB.mib
new file mode 100644
index 0000000..b50137f
--- /dev/null
+++ b/snmp_builder/mibs/MPLS-TE-STD-MIB.mib
@@ -0,0 +1,2483 @@
+MPLS-TE-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   Integer32, Unsigned32, Counter32, Counter64, TimeTicks,
+   zeroDotZero
+      FROM SNMPv2-SMI                                    -- [RFC2578]
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF                                   -- [RFC2580]
+   TruthValue, RowStatus, RowPointer, StorageType,
+   TimeStamp
+      FROM SNMPv2-TC                                     -- [RFC2579]
+   InterfaceIndexOrZero, ifGeneralInformationGroup,
+   ifCounterDiscontinuityGroup
+      FROM IF-MIB                                        -- [RFC2863]
+   mplsStdMIB, MplsBitRate, MplsBurstSize, MplsLSPID,
+   MplsTunnelIndex, MplsTunnelInstanceIndex,
+   MplsTunnelAffinity, MplsExtendedTunnelId, MplsPathIndex,
+   MplsPathIndexOrZero, MplsOwner, TeHopAddressType,
+   TeHopAddress, TeHopAddressAS, TeHopAddressUnnum
+      FROM MPLS-TC-STD-MIB                               -- [RFC3811]
+   SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB                            -- [RFC3411]
+   IndexIntegerNextFree
+      FROM DIFFSERV-MIB                                  -- [RFC3289]
+   InetAddressPrefixLength
+      FROM INET-ADDRESS-MIB                              -- [RFC3291]
+   ;
+
+mplsTeStdMIB MODULE-IDENTITY
+   LAST-UPDATED
+      "200406030000Z" -- June 3, 2004
+   ORGANIZATION
+      "Multiprotocol Label Switching (MPLS) Working Group"
+   CONTACT-INFO
+        "        Cheenu Srinivasan
+                 Bloomberg L.P.
+         Email:  cheenu@bloomberg.net
+
+                 Arun Viswanathan
+                 Force10 Networks, Inc.
+         Email:  arunv@force10networks.com
+
+                 Thomas D. Nadeau
+                 Cisco Systems, Inc.
+         Email:  tnadeau@cisco.com
+
+                Comments about this document should be emailed
+                directly to the MPLS working group mailing list at
+                mpls@uu.net."
+   DESCRIPTION
+         "Copyright (C) The Internet Society (2004). The
+         initial version of this MIB module was published
+         in RFC 3812. For full legal notices see the RFC
+         itself or see: http://www.ietf.org/copyrights/ianamib.html
+
+         This MIB module contains managed object definitions
+          for MPLS Traffic Engineering (TE) as defined in:
+         1. Extensions to RSVP for LSP Tunnels, Awduche et
+          al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+
+          (Editor), RFC 3212, January 2002
+         3. Requirements for Traffic Engineering Over MPLS,
+          Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M.,
+          and J. McManus, [RFC2702], September 1999"
+
+   -- Revision history.
+
+   REVISION
+      "200406030000Z" -- June 3, 2004
+   DESCRIPTION
+        "Initial version issued as part of RFC 3812."
+   ::= { mplsStdMIB 3 }
+
+-- Top level components of this MIB module.
+
+-- traps
+mplsTeNotifications OBJECT IDENTIFIER ::= { mplsTeStdMIB 0 }
+-- tables, scalars
+mplsTeScalars       OBJECT IDENTIFIER ::= { mplsTeStdMIB 1 }
+mplsTeObjects       OBJECT IDENTIFIER ::= { mplsTeStdMIB 2 }
+-- conformance
+mplsTeConformance   OBJECT IDENTIFIER ::= { mplsTeStdMIB 3 }
+
+-- MPLS Tunnel scalars.
+
+mplsTunnelConfigured OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The number of tunnels configured on this device. A
+          tunnel is considered configured if the
+          mplsTunnelRowStatus is active(1)."
+   ::= { mplsTeScalars 1 }
+
+mplsTunnelActive OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The number of tunnels active on this device. A
+          tunnel is considered active if the
+          mplsTunnelOperStatus is up(1)."
+   ::= { mplsTeScalars 2 }
+
+mplsTunnelTEDistProto OBJECT-TYPE
+   SYNTAX        BITS {
+          other (0),
+          ospf (1),
+          isis (2)
+      }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The traffic engineering distribution protocol(s)
+          used by this LSR. Note that an LSR may support more
+          than one distribution protocol simultaneously."
+   ::= { mplsTeScalars 3 }
+
+mplsTunnelMaxHops OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The maximum number of hops that can be specified for
+          a tunnel on this device."
+   ::= { mplsTeScalars 4 }
+
+mplsTunnelNotificationMaxRate OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-write
+   STATUS       current
+   DESCRIPTION
+        "This variable indicates the maximum number of
+          notifications issued per second. If events occur
+          more rapidly, the implementation may simply fail to
+          emit these notifications during that period, or may
+          queue them until an appropriate time. A value of 0
+          means no throttling is applied and events may be
+          notified at the rate at which they occur."
+   DEFVAL       { 0 }
+   ::= { mplsTeScalars 5 }
+
+-- End of MPLS Tunnel scalars.
+
+-- MPLS tunnel table.
+
+mplsTunnelIndexNext OBJECT-TYPE
+   SYNTAX        IndexIntegerNextFree (0..65535)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains an unused value for
+
+        mplsTunnelIndex, or a zero to indicate
+        that none exist. Negative values are not allowed,
+        as they do not correspond to valid values of
+        mplsTunnelIndex.
+
+        Note that this object offers an unused value
+        for an mplsTunnelIndex value at the ingress
+        side of a tunnel. At other LSRs the value
+        of mplsTunnelIndex SHOULD be taken from the
+        value signaled by the MPLS signaling protocol.
+       "
+   ::= { mplsTeObjects 1 }
+
+mplsTunnelTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelTable allows new MPLS tunnels to be
+          created between an LSR and a remote endpoint, and
+          existing tunnels to be reconfigured or removed.
+          Note that only point-to-point tunnel segments are
+          supported, although multipoint-to-point and point-
+          to-multipoint connections are supported by an LSR
+          acting as a cross-connect.  Each MPLS tunnel can
+          thus have one out-segment originating at this LSR
+          and/or one in-segment terminating at this LSR."
+   ::= { mplsTeObjects 2 }
+
+mplsTunnelEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents an MPLS tunnel.
+          An entry can be created by a network administrator
+          or by an SNMP agent as instructed by an MPLS
+          signalling protocol. Whenever a new entry is
+          created with mplsTunnelIsIf set to true(1), then a
+          corresponding entry is created in ifTable as well
+          (see RFC 2863). The ifType of this entry is
+          mplsTunnel(150).
+
+        A tunnel entry needs to be uniquely identified across
+          a MPLS network. Indices mplsTunnelIndex and
+          mplsTunnelInstance uniquely identify a tunnel on
+          the LSR originating the tunnel.  To uniquely
+          identify a tunnel across an MPLS network requires
+
+          index mplsTunnelIngressLSRId.  The last index
+          mplsTunnelEgressLSRId is useful in identifying all
+          instances of a tunnel that terminate on the same
+          egress LSR."
+   REFERENCE
+        "1. RFC 2863 - The Interfaces Group MIB, McCloghrie,
+          K., and F. Kastenholtz, June 2000 "
+   INDEX {  mplsTunnelIndex,
+            mplsTunnelInstance,
+            mplsTunnelIngressLSRId,
+            mplsTunnelEgressLSRId
+         }
+   ::= { mplsTunnelTable 1 }
+
+MplsTunnelEntry ::= SEQUENCE {
+      mplsTunnelIndex              MplsTunnelIndex,
+      mplsTunnelInstance           MplsTunnelInstanceIndex,
+      mplsTunnelIngressLSRId       MplsExtendedTunnelId,
+      mplsTunnelEgressLSRId        MplsExtendedTunnelId,
+      mplsTunnelName               SnmpAdminString,
+      mplsTunnelDescr              SnmpAdminString,
+      mplsTunnelIsIf               TruthValue,
+      mplsTunnelIfIndex            InterfaceIndexOrZero,
+      mplsTunnelOwner              MplsOwner,
+      mplsTunnelRole               INTEGER,
+      mplsTunnelXCPointer          RowPointer,
+      mplsTunnelSignallingProto    INTEGER,
+      mplsTunnelSetupPrio          Integer32,
+      mplsTunnelHoldingPrio        Integer32,
+      mplsTunnelSessionAttributes  BITS,
+      mplsTunnelLocalProtectInUse  TruthValue,
+      mplsTunnelResourcePointer    RowPointer,
+      mplsTunnelPrimaryInstance    MplsTunnelInstanceIndex,
+      mplsTunnelInstancePriority   Unsigned32,
+      mplsTunnelHopTableIndex      MplsPathIndexOrZero,
+      mplsTunnelPathInUse          MplsPathIndexOrZero,
+      mplsTunnelARHopTableIndex    MplsPathIndexOrZero,
+      mplsTunnelCHopTableIndex     MplsPathIndexOrZero,
+      mplsTunnelIncludeAnyAffinity MplsTunnelAffinity,
+      mplsTunnelIncludeAllAffinity MplsTunnelAffinity,
+      mplsTunnelExcludeAnyAffinity MplsTunnelAffinity,
+      mplsTunnelTotalUpTime        TimeTicks,
+      mplsTunnelInstanceUpTime     TimeTicks,
+      mplsTunnelPrimaryUpTime      TimeTicks,
+      mplsTunnelPathChanges        Counter32,
+      mplsTunnelLastPathChange     TimeTicks,
+      mplsTunnelCreationTime       TimeStamp,
+      mplsTunnelStateTransitions   Counter32,
+      mplsTunnelAdminStatus        INTEGER,
+      mplsTunnelOperStatus         INTEGER,
+      mplsTunnelRowStatus          RowStatus,
+      mplsTunnelStorageType        StorageType
+   }
+
+mplsTunnelIndex OBJECT-TYPE
+   SYNTAX        MplsTunnelIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies a set of tunnel instances
+          between a pair of ingress and egress LSRs.
+          Managers should obtain new values for row
+          creation in this table by reading
+          mplsTunnelIndexNext. When
+          the MPLS signalling protocol is rsvp(2) this value
+          SHOULD be equal to the value signaled in the
+          Tunnel Id of the Session object. When the MPLS
+          signalling protocol is crldp(3) this value
+          SHOULD be equal to the value signaled in the
+          LSP ID."
+   ::= { mplsTunnelEntry 1 }
+
+mplsTunnelInstance OBJECT-TYPE
+   SYNTAX        MplsTunnelInstanceIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies a particular instance of a
+          tunnel between a pair of ingress and egress LSRs.
+          It is useful to identify multiple instances of
+          tunnels for the purposes of backup and parallel
+          tunnels. When the MPLS signaling protocol is
+          rsvp(2) this value SHOULD be equal to the LSP Id
+          of the Sender Template object. When the signaling
+          protocol is crldp(3) there is no equivalent
+          signaling object."
+   ::= { mplsTunnelEntry 2 }
+
+mplsTunnelIngressLSRId OBJECT-TYPE
+   SYNTAX        MplsExtendedTunnelId
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Identity of the ingress LSR associated with this
+          tunnel instance. When the MPLS signalling protocol
+          is rsvp(2) this value SHOULD be equal to the Tunnel
+
+          Sender Address in the Sender Template object and MAY
+          be equal to the Extended Tunnel Id field in the
+          SESSION object. When the MPLS signalling protocol is
+          crldp(3) this value SHOULD be equal to the Ingress
+          LSR Router ID field in the LSPID TLV object."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+          (Editor), RFC 3212, January 2002"
+   ::= { mplsTunnelEntry 3 }
+
+mplsTunnelEgressLSRId OBJECT-TYPE
+   SYNTAX        MplsExtendedTunnelId
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Identity of the egress LSR associated with this
+          tunnel instance."
+   ::= { mplsTunnelEntry 4 }
+
+mplsTunnelName OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The canonical name assigned to the tunnel. This name
+          can be used to refer to the tunnel on the LSR's
+          console port.  If mplsTunnelIsIf is set to true
+          then the ifName of the interface corresponding to
+          this tunnel should have a value equal to
+          mplsTunnelName.  Also see the description of ifName
+          in RFC 2863."
+   REFERENCE
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+          and F. Kastenholtz, June 2000"
+   DEFVAL {""}
+   ::= { mplsTunnelEntry 5 }
+
+mplsTunnelDescr OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A textual string containing information about the
+          tunnel.  If there is no description this object
+          contains a zero length string. This object is may
+          not be signaled by MPLS signaling protocols,
+          consequentally the value of this object at transit
+          and egress LSRs MAY be automatically generated or
+          absent."
+   DEFVAL {""}
+   ::= { mplsTunnelEntry 6 }
+
+mplsTunnelIsIf OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes whether or not this tunnel corresponds to an
+          interface represented in the interfaces group
+          table. Note that if this variable is set to true
+          then the ifName of the interface corresponding to
+          this tunnel should have a value equal to
+          mplsTunnelName.  Also see the description of ifName
+          in RFC 2863.  This object is meaningful only at the
+          ingress and egress LSRs."
+   REFERENCE
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+          and F. Kastenholtz, June 2000"
+   DEFVAL { false }
+   ::= { mplsTunnelEntry 7 }
+
+mplsTunnelIfIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelIsIf is set to true, then this value
+          contains the LSR-assigned ifIndex which corresponds
+          to an entry in the interfaces table.  Otherwise
+          this variable should contain the value of zero
+          indicating that a valid ifIndex was not assigned to
+          this tunnel interface."
+   REFERENCE
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+          and F. Kastenholtz, June 2000"
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 8 }
+
+mplsTunnelOwner OBJECT-TYPE
+   SYNTAX        MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Denotes the entity that created and is responsible
+
+          for managing this tunnel. This column is
+          automatically filled by the agent on creation of a
+          row."
+   ::= { mplsTunnelEntry 9 }
+
+mplsTunnelRole OBJECT-TYPE
+   SYNTAX        INTEGER { head(1),
+                           transit(2),
+                           tail(3),
+                           headTail(4) }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This value signifies the role that this tunnel
+          entry/instance represents. This value MUST be set
+          to head(1) at the originating point of the tunnel.
+          This value MUST be set to transit(2) at transit
+          points along the tunnel, if transit points are
+          supported. This value MUST be set to tail(3) at the
+          terminating point of the tunnel if tunnel tails are
+          supported.
+
+         The value headTail(4) is provided for tunnels that
+          begin and end on the same LSR."
+   DEFVAL { head }
+   ::= { mplsTunnelEntry 10 }
+
+mplsTunnelXCPointer OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable points to a row in the mplsXCTable.
+          This table identifies the segments that compose
+          this tunnel, their characteristics, and
+          relationships to each other. A value of zeroDotZero
+          indicates that no LSP has been associated with this
+          tunnel yet."
+   REFERENCE
+        "Srinivasan, C., Viswanathan, A., and T. Nadeau,
+          Multiprotocol Label Switching (MPLS) Label Switching
+          Router (LSR) Management Information Base (MIB), RFC 3813,
+          June 2004"
+   DEFVAL        { zeroDotZero }
+   ::= { mplsTunnelEntry 11 }
+
+mplsTunnelSignallingProto OBJECT-TYPE
+   SYNTAX       INTEGER {
+
+                     none(1),
+                     rsvp(2),
+                     crldp(3),
+                     other(4)
+                     }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The signalling protocol, if any, used to setup this
+          tunnel."
+   DEFVAL        { none }
+   ::= { mplsTunnelEntry 12 }
+
+mplsTunnelSetupPrio OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the setup priority of this tunnel."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+          (Editor), RFC 3212, January 2002"
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 13 }
+
+mplsTunnelHoldingPrio OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the holding priority for this tunnel."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001
+
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+          (Editor), RFC 3212, January 2002"
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 14 }
+
+mplsTunnelSessionAttributes OBJECT-TYPE
+   SYNTAX      BITS {
+                  fastReroute (0),
+                  mergingPermitted (1),
+                  isPersistent (2),
+                  isPinned (3),
+                  recordRoute(4)
+                 }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This bit mask indicates optional session values for
+          this tunnel. The following describes these bit
+          fields:
+
+        fastRerouteThis flag indicates that the any tunnel
+          hop may choose to reroute this tunnel without
+          tearing it down.  This flag permits transit routers
+          to use a local repair mechanism which may result in
+          violation of the explicit routing of this tunnel.
+          When a fault is detected on an adjacent downstream
+          link or node, a transit router can re-route traffic
+          for fast service restoration.
+
+        mergingPermitted This flag permits transit routers
+          to merge this session with other RSVP sessions for
+          the purpose of reducing resource overhead on
+          downstream transit routers, thereby providing
+          better network scaling.
+
+        isPersistent  Indicates whether this tunnel should
+          be restored automatically after a failure occurs.
+
+        isPinned   This flag indicates whether the loose-
+          routed hops of this tunnel are to be pinned.
+
+        recordRouteThis flag indicates whether or not the
+          signalling protocol should remember the tunnel path
+          after it has been signaled."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   ::= { mplsTunnelEntry 15 }
+
+mplsTunnelLocalProtectInUse  OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates that the local repair mechanism is in use
+          to maintain this tunnel (usually in the face of an
+          outage of the link it was previously routed over)."
+   DEFVAL { false }
+   ::= { mplsTunnelEntry 16 }
+
+mplsTunnelResourcePointer OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable represents a pointer to the traffic
+          parameter specification for this tunnel.  This
+          value may point at an entry in the
+          mplsTunnelResourceEntry to indicate which
+          mplsTunnelResourceEntry is to be assigned to this
+          LSP instance.  This value may optionally point at
+          an externally defined traffic parameter
+          specification table.  A value of zeroDotZero
+          indicates best-effort treatment.  By having the
+          same value of this object, two or more LSPs can
+          indicate resource sharing."
+   DEFVAL        { zeroDotZero }
+   ::= { mplsTunnelEntry 17 }
+
+mplsTunnelPrimaryInstance OBJECT-TYPE
+   SYNTAX        MplsTunnelInstanceIndex
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the instance index of the primary instance
+          of this tunnel. More details of the definition of
+          tunnel instances and the primary tunnel instance
+          can be found in the description of the TEXTUAL-CONVENTION
+          MplsTunnelInstanceIndex."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 18 }
+
+mplsTunnelInstancePriority OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This value indicates which priority, in descending
+          order, with 0 indicating the lowest priority,
+          within a group of tunnel instances. A group of
+          tunnel instances is defined as a set of LSPs with
+          the same mplsTunnelIndex in this table, but with a
+          different mplsTunnelInstance. Tunnel instance
+          priorities are used to denote the priority at which
+          a particular tunnel instance will supercede
+          another. Instances of tunnels containing the same
+          mplsTunnelInstancePriority will be used for load
+          sharing."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 19 }
+
+mplsTunnelHopTableIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsTunnelHopTable entry that
+          specifies the explicit route hops for this tunnel.
+          This object is meaningful only at the head-end of
+          the tunnel."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 20 }
+
+mplsTunnelPathInUse OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This value denotes the configured path that was
+          chosen for this tunnel. This value reflects the
+          secondary index into mplsTunnelHopTable. This path
+          may not exactly match the one in
+          mplsTunnelARHopTable due to the fact that some CSPF
+          modification may have taken place. See
+          mplsTunnelARHopTable for the actual path being
+          taken by the tunnel. A value of zero denotes that
+          no path is currently in use or available."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 21 }
+
+mplsTunnelARHopTableIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsTunnelARHopTable entry that
+          specifies the actual hops traversed by the tunnel.
+          This is automatically updated by the agent when the
+          actual hops becomes available."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 22 }
+
+mplsTunnelCHopTableIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsTunnelCHopTable entry that
+          specifies the computed hops traversed by the
+          tunnel. This is automatically updated by the agent
+          when computed hops become available or when
+          computed hops get modified."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 23 }
+
+mplsTunnelIncludeAnyAffinity OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A link satisfies the include-any constraint if and
+          only if the constraint is zero, or the link and the
+          constraint have a resource class in common."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   ::= { mplsTunnelEntry 24 }
+
+mplsTunnelIncludeAllAffinity OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A link satisfies the include-all constraint if and
+          only if the link contains all of the administrative
+          groups specified in the constraint."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   ::= { mplsTunnelEntry 25 }
+
+mplsTunnelExcludeAnyAffinity OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A link satisfies the exclude-any constraint if and
+          only if the link contains none of the
+          administrative groups specified in the constraint."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 26 }
+
+mplsTunnelTotalUpTime OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This value represents the aggregate up time for all
+          instances of this tunnel, if available. If this
+          value is unavailable, it MUST return a value of 0."
+      ::= { mplsTunnelEntry 27 }
+
+mplsTunnelInstanceUpTime OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This value identifies the total time that this
+          tunnel instance's operStatus has been Up(1)."
+      ::= { mplsTunnelEntry 28 }
+
+mplsTunnelPrimaryUpTime OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the total time the primary instance of
+          this tunnel has been active. The primary instance
+          of this tunnel is defined in
+          mplsTunnelPrimaryInstance."
+   ::= { mplsTunnelEntry 29 }
+
+mplsTunnelPathChanges OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the number of times the actual path for
+         this tunnel instance has changed."
+   ::= { mplsTunnelEntry 30 }
+
+mplsTunnelLastPathChange OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the time since the last change to the
+         actual path for this tunnel instance."
+   ::= { mplsTunnelEntry 31 }
+
+mplsTunnelCreationTime OBJECT-TYPE
+   SYNTAX        TimeStamp
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the value of SysUpTime when the first
+          instance of this tunnel came into existence.
+          That is, when the value of mplsTunnelOperStatus
+          was first set to up(1)."
+   ::= { mplsTunnelEntry 32 }
+
+mplsTunnelStateTransitions OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the number of times the state
+          (mplsTunnelOperStatus) of this tunnel instance has
+          changed."
+   ::= { mplsTunnelEntry 33 }
+
+mplsTunnelAdminStatus OBJECT-TYPE
+   SYNTAX     INTEGER {
+                   -- ready to pass packets
+                   up(1),
+                   down(2),
+                   -- in some test mode
+                   testing(3)
+             }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the desired operational status of this
+          tunnel."
+   ::= { mplsTunnelEntry 34 }
+
+mplsTunnelOperStatus OBJECT-TYPE
+   SYNTAX     INTEGER {
+               -- ready to pass packets
+               up(1),
+               down(2),
+               -- in some test mode
+               testing(3),
+               -- status cannot be determined
+               unknown(4),
+               dormant(5),
+               -- some component is missing
+               notPresent(6),
+               -- down due to the state of
+               -- lower layer interfaces
+               lowerLayerDown(7)
+             }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Indicates the actual operational status of this
+          tunnel, which is typically but not limited to, a
+          function of the state of individual segments of
+          this tunnel."
+   ::= { mplsTunnelEntry 35 }
+
+mplsTunnelRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table.  When a row in this
+          table is in active(1) state, no objects in that row
+          can be modified by the agent except
+          mplsTunnelAdminStatus, mplsTunnelRowStatus and
+          mplsTunnelStorageType."
+   ::= { mplsTunnelEntry 36 }
+
+mplsTunnelStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION  "The storage type for this tunnel entry.
+                 Conceptual rows having the value 'permanent'
+                 need not allow write-access to any columnar
+                 objects in the row."
+   DEFVAL { volatile }
+   ::= { mplsTunnelEntry 37 }
+
+-- End of mplsTunnelTable
+
+mplsTunnelHopListIndexNext OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This object contains an appropriate value to be used
+          for mplsTunnelHopListIndex when creating entries in
+          the mplsTunnelHopTable.  If the number of
+          unassigned entries is exhausted, a retrieval
+
+          operation will return a value of 0.  This object
+          may also return a value of 0 when the LSR is unable
+          to accept conceptual row creation, for example, if
+          the mplsTunnelHopTable is implemented as read-only.
+          To obtain the value of mplsTunnelHopListIndex for a
+          new entry in the mplsTunnelHopTable, the manager
+          issues a management protocol retrieval operation to
+          obtain the current value of mplsTunnelHopIndex.
+
+         When the SET is performed to create a row in the
+          mplsTunnelHopTable, the Command Responder (agent)
+          must determine whether the value is indeed still
+          unused; Two Network Management Applications may
+          attempt to create a row (configuration entry)
+          simultaneously and use the same value. If it is
+          currently unused, the SET succeeds and the Command
+          Responder (agent) changes the value of this object,
+          according to an implementation-specific algorithm.
+          If the value is in use, however, the SET fails.  The
+          Network Management Application must then re-read
+          this variable to obtain a new usable value."
+   ::= { mplsTeObjects 3 }
+
+mplsTunnelHopTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelHopTable is used to indicate the hops,
+          strict or loose, for an instance of an MPLS tunnel
+          defined in mplsTunnelTable, when it is established
+          via signalling, for the outgoing direction of the
+          tunnel. Thus at a transit LSR, this table contains
+          the desired path of the tunnel from this LSR
+          onwards. Each row in this table is indexed by
+          mplsTunnelHopListIndex which corresponds to a group
+          of hop lists or path options.  Each row also has a
+          secondary index mplsTunnelHopIndex, which indicates
+          a group of hops (also known as a path option).
+          Finally, the third index, mplsTunnelHopIndex
+          indicates the specific hop information for a path
+          option. In case we want to specify a particular
+          interface on the originating LSR of an outgoing
+          tunnel by which we want packets to exit the LSR,
+          we specify this as the first hop for this tunnel in
+          mplsTunnelHopTable."
+   ::= { mplsTeObjects 4 }
+
+mplsTunnelHopEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a tunnel hop.  An
+          entry is created by a network administrator for
+          signaled ERLSP set up by an MPLS signalling
+          protocol."
+   INDEX {
+      mplsTunnelHopListIndex,
+      mplsTunnelHopPathOptionIndex,
+      mplsTunnelHopIndex
+   }
+   ::= { mplsTunnelHopTable 1 }
+
+MplsTunnelHopEntry ::= SEQUENCE {
+      mplsTunnelHopListIndex          MplsPathIndex,
+      mplsTunnelHopPathOptionIndex    MplsPathIndex,
+      mplsTunnelHopIndex              MplsPathIndex,
+      mplsTunnelHopAddrType           TeHopAddressType,
+      mplsTunnelHopIpAddr             TeHopAddress,
+      mplsTunnelHopIpPrefixLen        InetAddressPrefixLength,
+      mplsTunnelHopAsNumber           TeHopAddressAS,
+      mplsTunnelHopAddrUnnum          TeHopAddressUnnum,
+      mplsTunnelHopLspId              MplsLSPID,
+      mplsTunnelHopType               INTEGER,
+      mplsTunnelHopInclude            TruthValue,
+      mplsTunnelHopPathOptionName     SnmpAdminString,
+      mplsTunnelHopEntryPathComp      INTEGER,
+      mplsTunnelHopRowStatus          RowStatus,
+      mplsTunnelHopStorageType        StorageType
+   }
+
+mplsTunnelHopListIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular explicit route object."
+   ::= { mplsTunnelHopEntry 1 }
+
+mplsTunnelHopPathOptionIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying a
+          particular group of hops representing a particular
+          configured path. This is otherwise known as a path
+          option."
+   ::= { mplsTunnelHopEntry 2 }
+
+mplsTunnelHopIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Tertiary index into this table identifying a
+          particular hop."
+   ::= { mplsTunnelHopEntry 3 }
+
+mplsTunnelHopAddrType OBJECT-TYPE
+    SYNTAX        TeHopAddressType
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION  "The Hop Address Type of this tunnel hop.
+
+                  The value of this object cannot be changed
+                  if the value of the corresponding
+                  mplsTunnelHopRowStatus object is 'active'.
+
+                  Note that lspid(5) is a valid option only
+                  for tunnels signaled via CRLDP.
+                 "
+    DEFVAL        { ipv4 }
+    ::= { mplsTunnelHopEntry 4 }
+
+mplsTunnelHopIpAddr OBJECT-TYPE
+    SYNTAX        TeHopAddress
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION  "The Tunnel Hop Address for this tunnel hop.
+
+                  The type of this address is determined by the
+                  value of the corresponding mplsTunnelHopAddrType.
+
+                  The value of this object cannot be changed
+                  if the value of the corresponding
+                  mplsTunnelHopRowStatus object is 'active'.
+                 "
+    DEFVAL       { '00000000'h }  -- IPv4 address 0.0.0.0
+    ::= { mplsTunnelHopEntry 5 }
+
+ mplsTunnelHopIpPrefixLen OBJECT-TYPE
+    SYNTAX        InetAddressPrefixLength
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION  "If mplsTunnelHopAddrType is set to ipv4(1) or
+                  ipv6(2), then this value will contain an
+                  appropriate prefix length for the IP address in
+                  object mplsTunnelHopIpAddr. Otherwise this value
+                  is irrelevant and should be ignored.
+                 "
+    DEFVAL         { 32 }
+    ::= { mplsTunnelHopEntry 6 }
+
+mplsTunnelHopAsNumber OBJECT-TYPE
+   SYNTAX        TeHopAddressAS
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelHopAddrType is set to asnumber(3), then
+          this value will contain the AS number of this hop.
+          Otherwise the agent should set this object to zero-
+          length string and the manager should ignore this."
+   ::= { mplsTunnelHopEntry 7 }
+
+mplsTunnelHopAddrUnnum OBJECT-TYPE
+   SYNTAX        TeHopAddressUnnum
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelHopAddrType is set to unnum(4), then
+          this value will contain the interface identifier of
+          the unnumbered interface for this hop. This object
+          should be used in conjunction with
+          mplsTunnelHopIpAddress which would contain the LSR
+          Router ID in this case. Otherwise the agent should
+          set this object to zero-length string and the
+          manager should ignore this."
+   ::= { mplsTunnelHopEntry 8 }
+
+mplsTunnelHopLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelHopAddrType is set to lspid(5), then
+          this value will contain the LSPID of a tunnel of
+          this hop. The present tunnel being configured is
+          tunneled through this hop (using label stacking).
+          This object is otherwise insignificant and should
+
+          contain a value of 0 to indicate this fact."
+   ::= { mplsTunnelHopEntry 9 }
+
+mplsTunnelHopType OBJECT-TYPE
+   SYNTAX        INTEGER {
+                      strict(1),
+                      loose(2)
+                     }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes whether this tunnel hop is routed in a
+          strict or loose fashion. The value of this object
+          has no meaning if the mplsTunnelHopInclude object
+          is set to 'false'."
+   ::= { mplsTunnelHopEntry 10 }
+
+mplsTunnelHopInclude OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If this value is set to true, then this indicates
+          that this hop must be included in the tunnel's
+          path. If this value is set to 'false', then this hop
+          must be avoided when calculating the path for this
+          tunnel. The default value of this object is 'true',
+          so that by default all indicated hops are included
+          in the CSPF path computation. If this object is set
+          to 'false' the value of mplsTunnelHopType should be
+          ignored."
+   DEFVAL { true }
+   ::= { mplsTunnelHopEntry 11 }
+
+mplsTunnelHopPathOptionName OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The description of this series of hops as they
+          relate to the specified path option. The
+          value of this object SHOULD be the same for
+          each hop in the series that comprises a
+          path option."
+   ::= { mplsTunnelHopEntry 12 }
+
+mplsTunnelHopEntryPathComp OBJECT-TYPE
+   SYNTAX        INTEGER {
+
+                      dynamic(1),    -- CSPF computed
+                      explicit(2)    -- strict hop
+                  }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If this value is set to dynamic, then the user
+          should only specify the source and destination of
+          the path and expect that the CSPF will calculate
+          the remainder of the path.  If this value is set to
+          explicit, the user should specify the entire path
+          for the tunnel to take.  This path may contain
+          strict or loose hops.  Each hop along a specific
+          path SHOULD have this object set to the same value"
+   ::= { mplsTunnelHopEntry 13 }
+
+mplsTunnelHopRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table.  When a row in this
+          table is in active(1) state, no objects in that row
+          can be modified by the agent except
+          mplsTunnelHopRowStatus and
+          mplsTunnelHopStorageType."
+   ::= { mplsTunnelHopEntry 14 }
+
+mplsTunnelHopStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The storage type for this Hop entry. Conceptual
+         rows having the value 'permanent' need not
+         allow write-access to any columnar objects
+         in the row."
+   DEFVAL { volatile }
+   ::= { mplsTunnelHopEntry 15 }
+
+-- End of mplsTunnelHopTable
+
+-- Begin of mplsTunnelResourceTable
+
+mplsTunnelResourceIndexNext OBJECT-TYPE
+   SYNTAX        Unsigned32 (0.. 2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This object contains the next appropriate value to
+          be used for mplsTunnelResourceIndex when creating
+          entries in the mplsTunnelResourceTable. If the
+          number of unassigned entries is exhausted, a
+          retrieval operation will return a value of 0.  This
+          object may also return a value of 0 when the LSR is
+          unable to accept conceptual row creation, for
+          example, if the mplsTunnelTable is implemented as
+          read-only.  To obtain the mplsTunnelResourceIndex
+          value for a new entry, the manager must first issue
+          a management protocol retrieval operation to obtain
+          the current value of this object.
+
+         When the SET is performed to create a row in the
+          mplsTunnelResourceTable, the Command Responder
+          (agent) must determine whether the value is indeed
+          still unused; Two Network Management Applications
+          may attempt to create a row (configuration entry)
+          simultaneously and use the same value. If it is
+          currently unused, the SET succeeds and the Command
+          Responder (agent) changes the value of this object,
+          according to an implementation-specific algorithm.
+          If the value is in use, however, the SET fails.  The
+          Network Management Application must then re-read
+          this variable to obtain a new usable value."
+   ::= { mplsTeObjects 5 }
+
+mplsTunnelResourceTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelResourceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelResourceTable allows a manager to
+          specify which resources are desired for an MPLS
+          tunnel.  This table also allows several tunnels to
+          point to a single entry in this table, implying
+          that these tunnels should share resources."
+   ::= { mplsTeObjects 6 }
+
+mplsTunnelResourceEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelResourceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a set of resources
+          for an MPLS tunnel.  An entry can be created by a
+
+          network administrator or by an SNMP agent as
+          instructed by any MPLS signalling protocol.
+         An entry in this table referenced by a tunnel instance
+          with zero mplsTunnelInstance value indicates a
+          configured set of resource parameter. An entry
+          referenced by a tunnel instance with a non-zero
+          mplsTunnelInstance reflects the in-use resource
+          parameters for the tunnel instance which may have
+          been negotiated or modified by the MPLS signaling
+          protocols."
+   INDEX         { mplsTunnelResourceIndex }
+   ::= { mplsTunnelResourceTable 1 }
+
+MplsTunnelResourceEntry ::= SEQUENCE {
+      mplsTunnelResourceIndex                Unsigned32,
+      mplsTunnelResourceMaxRate              MplsBitRate,
+      mplsTunnelResourceMeanRate             MplsBitRate,
+      mplsTunnelResourceMaxBurstSize         MplsBurstSize,
+      mplsTunnelResourceMeanBurstSize        MplsBurstSize,
+      mplsTunnelResourceExBurstSize          MplsBurstSize,
+      mplsTunnelResourceFrequency            INTEGER,
+      mplsTunnelResourceWeight               Unsigned32,
+      mplsTunnelResourceRowStatus            RowStatus,
+      mplsTunnelResourceStorageType          StorageType
+   }
+
+mplsTunnelResourceIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies this row."
+   ::= { mplsTunnelResourceEntry 1 }
+
+mplsTunnelResourceMaxRate OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "kilobits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The maximum rate in bits/second.  Note that setting
+          mplsTunnelResourceMaxRate,
+          mplsTunnelResourceMeanRate, and
+          mplsTunnelResourceMaxBurstSize to 0 indicates best-
+          effort treatment."
+   ::= { mplsTunnelResourceEntry 2 }
+
+mplsTunnelResourceMeanRate OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "kilobits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This object is copied into an instance of
+          mplsTrafficParamMeanRate in the
+          mplsTrafficParamTable. The OID of this table entry
+          is then copied into the corresponding
+          mplsInSegmentTrafficParamPtr."
+   ::= { mplsTunnelResourceEntry 3 }
+
+mplsTunnelResourceMaxBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The maximum burst size in bytes."
+   ::= { mplsTunnelResourceEntry 4 }
+
+mplsTunnelResourceMeanBurstSize OBJECT-TYPE
+   SYNTAX       MplsBurstSize
+   UNITS        "bytes"
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The mean burst size in bytes.  The implementations
+          which do not implement this variable must return
+          a noSuchObject exception for this object and must
+          not allow a user to set this object."
+   ::= { mplsTunnelResourceEntry 5 }
+
+mplsTunnelResourceExBurstSize OBJECT-TYPE
+   SYNTAX       MplsBurstSize
+   UNITS        "bytes"
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The Excess burst size in bytes.  The implementations
+          which do not implement this variable must return
+          noSuchObject exception for this object and must
+          not allow a user to set this value."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelResourceEntry 6 }
+
+mplsTunnelResourceFrequency  OBJECT-TYPE
+   SYNTAX       INTEGER { unspecified(1),
+                          frequent(2),
+                          veryFrequent(3)
+                         }
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The granularity of the availability of committed
+          rate.  The implementations which do not implement
+          this variable must return unspecified(1) for this
+          value and must not allow a user to set this value."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelResourceEntry 7 }
+
+mplsTunnelResourceWeight    OBJECT-TYPE
+   SYNTAX       Unsigned32(0..255)
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The relative weight for using excess bandwidth above
+          its committed rate.  The value of 0 means that
+          weight is not applicable for the CR-LSP."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelResourceEntry 8 }
+
+mplsTunnelResourceRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table.  When a row in this
+          table is in active(1) state, no objects in that row
+          can be modified by the agent except
+          mplsTunnelResourceRowStatus and
+          mplsTunnelResourceStorageType."
+   ::= { mplsTunnelResourceEntry 9 }
+
+mplsTunnelResourceStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The storage type for this Hop entry. Conceptual
+         rows having the value 'permanent' need not
+         allow write-access to any columnar objects
+
+         in the row."
+   DEFVAL { volatile }
+   ::= { mplsTunnelResourceEntry 10 }
+
+-- End mplsTunnelResourceTable
+-- Tunnel Actual Route Hop table.
+
+mplsTunnelARHopTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelARHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelARHopTable is used to indicate the
+          hops for an MPLS tunnel defined in mplsTunnelTable,
+          as reported by the MPLS signalling protocol. Thus at
+          a transit LSR, this table (if the table is supported
+          and if the signaling protocol is recording actual
+          route information) contains the actual route of the
+          whole tunnel. If the signaling protocol is not
+          recording the actual route, this table MAY report
+          the information from the mplsTunnelHopTable or the
+          mplsTunnelCHopTable.
+
+         Each row in this table is indexed by
+          mplsTunnelARHopListIndex. Each row also has a
+          secondary index mplsTunnelARHopIndex, corresponding
+          to the next hop that this row corresponds to.
+
+         Please note that since the information necessary to
+          build entries within this table is not provided by
+          some MPLS signalling protocols, implementation of
+          this table is optional. Furthermore, since the
+          information in this table is actually provided by
+          the MPLS signalling protocol after the path has
+          been set-up, the entries in this table are provided
+          only for observation, and hence, all variables in
+          this table are accessible exclusively as read-
+          only.
+
+         Note also that the contents of this table may change
+          while it is being read because of re-routing
+          activities. A network administrator may verify that
+          the actual route read is consistent by reference to
+          the mplsTunnelLastPathChange object."
+   ::= { mplsTeObjects 7 }
+
+mplsTunnelARHopEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelARHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a tunnel hop.  An
+          entry is created by the agent for signaled ERLSP
+          set up by an MPLS signalling protocol."
+   INDEX { mplsTunnelARHopListIndex, mplsTunnelARHopIndex }
+   ::= { mplsTunnelARHopTable 1 }
+
+MplsTunnelARHopEntry ::= SEQUENCE {
+      mplsTunnelARHopListIndex          MplsPathIndex,
+      mplsTunnelARHopIndex              MplsPathIndex,
+      mplsTunnelARHopAddrType           TeHopAddressType,
+      mplsTunnelARHopIpAddr             TeHopAddress,
+      mplsTunnelARHopAddrUnnum          TeHopAddressUnnum,
+      mplsTunnelARHopLspId              MplsLSPID
+   }
+
+mplsTunnelARHopListIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular recorded hop list."
+   ::= { mplsTunnelARHopEntry 1 }
+
+mplsTunnelARHopIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying the
+          particular hop."
+   ::= { mplsTunnelARHopEntry 2 }
+
+mplsTunnelARHopAddrType OBJECT-TYPE
+   SYNTAX        TeHopAddressType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Hop Address Type of this tunnel hop.
+
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP."
+   DEFVAL        { ipv4 }
+   ::= { mplsTunnelARHopEntry 3 }
+
+mplsTunnelARHopIpAddr OBJECT-TYPE
+   SYNTAX        TeHopAddress
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Tunnel Hop Address for this tunnel hop.
+
+         The type of this address is determined by the
+         value of the corresponding mplsTunnelARHopAddrType.
+         If mplsTunnelARHopAddrType is set to unnum(4),
+          then this value contains the LSR Router ID of the
+          unnumbered interface. Otherwise the agent SHOULD
+          set this object to the zero-length string and the
+          manager should ignore this object."
+    DEFVAL       { '00000000'h }  -- IPv4 address 0.0.0.0
+   ::= { mplsTunnelARHopEntry 4 }
+
+mplsTunnelARHopAddrUnnum OBJECT-TYPE
+   SYNTAX        TeHopAddressUnnum
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelARHopAddrType is set to unnum(4), then
+          this value will contain the interface identifier of
+          the unnumbered interface for this hop. This object
+          should be used in conjunction with
+          mplsTunnelARHopIpAddr which would contain the LSR
+          Router ID in this case. Otherwise the agent should
+          set this object to zero-length string and the
+          manager should ignore this."
+   ::= { mplsTunnelARHopEntry 5 }
+
+mplsTunnelARHopLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelARHopAddrType is set to lspid(5), then
+          this value will contain the LSP ID of this hop.
+          This object is otherwise insignificant and should
+          contain a value of 0 to indicate this fact."
+   ::= { mplsTunnelARHopEntry 6 }
+
+-- End of mplsTunnelARHopTable
+
+-- Tunnel Computed Hop table.
+
+mplsTunnelCHopTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelCHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelCHopTable is used to indicate the
+          hops, strict or loose, for an MPLS tunnel defined
+          in mplsTunnelTable, as computed by a constraint-
+          based routing protocol, based on the
+          mplsTunnelHopTable for the outgoing direction of
+          the tunnel. Thus at a transit LSR, this table (if
+          the table is supported) MAY contain the path
+          computed by the CSPF engine on (or on behalf of)
+          this LSR. Each row in this table is indexed by
+          mplsTunnelCHopListIndex.  Each row also has a
+          secondary index mplsTunnelCHopIndex, corresponding
+          to the next hop that this row corresponds to. In
+          case we want to specify a particular interface on
+          the originating LSR of an outgoing tunnel by which
+          we want packets to exit the LSR, we specify this as
+          the first hop for this tunnel in
+          mplsTunnelCHopTable.
+
+         Please note that since the information necessary to
+          build entries within this table may not be
+          supported by some LSRs, implementation of this
+          table is optional. Furthermore, since the
+          information in this table describes the path
+          computed by the CSPF engine the entries in this
+          table are read-only."
+   ::= { mplsTeObjects 8 }
+
+mplsTunnelCHopEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelCHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a tunnel hop.  An
+          entry in this table is created by a path
+          computation engine using CSPF techniques applied to
+          the information collected by routing protocols and
+          the hops specified in the corresponding
+          mplsTunnelHopTable."
+   INDEX { mplsTunnelCHopListIndex, mplsTunnelCHopIndex }
+   ::= { mplsTunnelCHopTable 1 }
+
+MplsTunnelCHopEntry ::= SEQUENCE {
+      mplsTunnelCHopListIndex          MplsPathIndex,
+      mplsTunnelCHopIndex              MplsPathIndex,
+      mplsTunnelCHopAddrType           TeHopAddressType,
+      mplsTunnelCHopIpAddr             TeHopAddress,
+      mplsTunnelCHopIpPrefixLen        InetAddressPrefixLength,
+      mplsTunnelCHopAsNumber           TeHopAddressAS,
+      mplsTunnelCHopAddrUnnum          TeHopAddressUnnum,
+      mplsTunnelCHopLspId              MplsLSPID,
+      mplsTunnelCHopType               INTEGER
+   }
+
+mplsTunnelCHopListIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular computed hop list."
+   ::= { mplsTunnelCHopEntry 1 }
+
+mplsTunnelCHopIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying the
+          particular hop."
+   ::= { mplsTunnelCHopEntry 2 }
+
+mplsTunnelCHopAddrType OBJECT-TYPE
+   SYNTAX        TeHopAddressType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Hop Address Type of this tunnel hop.
+
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP."
+   DEFVAL        { ipv4 }
+   ::= { mplsTunnelCHopEntry 3 }
+
+mplsTunnelCHopIpAddr OBJECT-TYPE
+   SYNTAX        TeHopAddress
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Tunnel Hop Address for this tunnel hop.
+
+         The type of this address is determined by the
+          value of the corresponding mplsTunnelCHopAddrType.
+
+         If mplsTunnelCHopAddrType is set to unnum(4), then
+          this value will contain the LSR Router ID of the
+          unnumbered interface. Otherwise the agent should
+          set this object to the zero-length string and the
+          manager SHOULD ignore this object."
+    DEFVAL       { '00000000'h }  -- IPv4 address 0.0.0.0
+   ::= { mplsTunnelCHopEntry 4 }
+
+mplsTunnelCHopIpPrefixLen OBJECT-TYPE
+   SYNTAX        InetAddressPrefixLength
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+         "If mplsTunnelCHopAddrType is set to ipv4(1) or
+           ipv6(2), then this value will contain an
+           appropriate prefix length for the IP address in
+           object mplsTunnelCHopIpAddr. Otherwise this value
+           is irrelevant and should be ignored.
+          "
+    DEFVAL         { 32 }
+   ::= { mplsTunnelCHopEntry 5 }
+
+mplsTunnelCHopAsNumber OBJECT-TYPE
+   SYNTAX        TeHopAddressAS
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelCHopAddrType is set to asnumber(3),
+          then this value will contain the AS number of this
+          hop. Otherwise the agent should set this object to
+          zero-length string and the manager should ignore
+          this."
+   ::= { mplsTunnelCHopEntry 6 }
+
+mplsTunnelCHopAddrUnnum OBJECT-TYPE
+   SYNTAX        TeHopAddressUnnum
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelCHopAddrType is set to unnum(4), then
+          this value will contain the unnumbered interface
+          identifier of this hop. This object should be used
+          in conjunction with mplsTunnelCHopIpAddr which
+          would contain the LSR Router ID in this case.
+
+          Otherwise the agent should set this object to zero-
+          length string and the manager should ignore this."
+   ::= { mplsTunnelCHopEntry 7 }
+
+mplsTunnelCHopLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelCHopAddrType is set to lspid(5), then
+          this value will contain the LSP ID of this hop.
+          This object is otherwise insignificant and should
+          contain a value of 0 to indicate this fact."
+   ::= { mplsTunnelCHopEntry 8 }
+
+mplsTunnelCHopType OBJECT-TYPE
+   SYNTAX        INTEGER { strict(1),
+                           loose(2)
+                         }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Denotes whether this is tunnel hop is routed in a
+          strict or loose fashion."
+   ::= { mplsTunnelCHopEntry 9 }
+
+-- End of mplsTunnelCHopTable
+
+-- MPLS Tunnel Performance Table.
+
+mplsTunnelPerfTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table provides per-tunnel instance MPLS
+          performance information."
+   ::= { mplsTeObjects 9 }
+
+mplsTunnelPerfEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is created by the LSR for
+          every tunnel.  Its is an extension to
+          mplsTunnelEntry."
+   AUGMENTS { mplsTunnelEntry }
+   ::= { mplsTunnelPerfTable 1 }
+
+MplsTunnelPerfEntry ::= SEQUENCE {
+      mplsTunnelPerfPackets           Counter32,
+      mplsTunnelPerfHCPackets         Counter64,
+      mplsTunnelPerfErrors            Counter32,
+      mplsTunnelPerfBytes             Counter32,
+      mplsTunnelPerfHCBytes           Counter64
+   }
+
+mplsTunnelPerfPackets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Number of packets forwarded by the tunnel.
+         This object should represents the 32-bit
+         value of the least significant part of the
+         64-bit value if both mplsTunnelPerfHCPackets
+         is returned."
+   ::= { mplsTunnelPerfEntry 1 }
+
+mplsTunnelPerfHCPackets OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High capacity counter for number of packets
+         forwarded by the tunnel. "
+   ::= { mplsTunnelPerfEntry 2 }
+
+mplsTunnelPerfErrors OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Number of packets dropped because of errors or for
+         other reasons."
+   ::= { mplsTunnelPerfEntry 3 }
+
+mplsTunnelPerfBytes OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Number of bytes forwarded by the tunnel.
+         This object should represents the 32-bit
+
+         value of the least significant part of the
+         64-bit value if both mplsTunnelPerfHCBytes
+         is returned."
+   ::= { mplsTunnelPerfEntry 4 }
+
+mplsTunnelPerfHCBytes OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High capacity counter for number of bytes forwarded
+          by the tunnel."
+   ::= { mplsTunnelPerfEntry 5 }
+
+-- End of mplsTunnelPerfTable
+
+-- CR-LDP Tunnel Resource Table
+
+mplsTunnelCRLDPResTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTunnelCRLDPResEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelCRLDPResTable allows a manager to
+          specify which CR-LDP-specific resources are desired
+          for an MPLS tunnel if that tunnel is signaled using
+          CR-LDP. Note that these attributes are in addition
+          to those specified in mplsTunnelResourceTable. This
+          table also allows several tunnels to point to a
+          single entry in this table, implying that these
+          tunnels should share resources."
+   ::= { mplsTeObjects 10 }
+
+mplsTunnelCRLDPResEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelCRLDPResEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a set of resources
+          for an MPLS tunnel established using CRLDP
+          (mplsTunnelSignallingProto equal to crldp (3)). An
+          entry can be created by a network administrator or
+          by an SNMP agent as instructed by any MPLS
+          signalling protocol."
+   INDEX { mplsTunnelResourceIndex }
+   ::= { mplsTunnelCRLDPResTable 1 }
+
+MplsTunnelCRLDPResEntry ::= SEQUENCE {
+      mplsTunnelCRLDPResMeanBurstSize   MplsBurstSize,
+      mplsTunnelCRLDPResExBurstSize     MplsBurstSize,
+      mplsTunnelCRLDPResFrequency       INTEGER,
+      mplsTunnelCRLDPResWeight          Unsigned32,
+      mplsTunnelCRLDPResFlags           Unsigned32,
+      mplsTunnelCRLDPResRowStatus       RowStatus,
+      mplsTunnelCRLDPResStorageType     StorageType
+   }
+
+mplsTunnelCRLDPResMeanBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The mean burst size in bytes."
+   ::= { mplsTunnelCRLDPResEntry 1 }
+
+mplsTunnelCRLDPResExBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "The Excess burst size in bytes."
+   REFERENCE
+     "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelCRLDPResEntry 2 }
+
+mplsTunnelCRLDPResFrequency OBJECT-TYPE
+   SYNTAX  INTEGER {
+         unspecified(1),
+         frequent(2),
+         veryFrequent(3)
+      }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The granularity of the availability of committed
+          rate."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelCRLDPResEntry 3 }
+
+mplsTunnelCRLDPResWeight OBJECT-TYPE
+   SYNTAX        Unsigned32(0..255)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The relative weight for using excess bandwidth above
+          its committed rate.  The value of 0 means that
+          weight is not applicable for the CR-LSP."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   DEFVAL { 0 }
+   ::= { mplsTunnelCRLDPResEntry 4 }
+
+mplsTunnelCRLDPResFlags OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..63)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The value of the 1 byte Flags conveyed as part of
+          the traffic parameters during the establishment of
+          the CRLSP. The bits in this object are to be
+          interpreted as follows.
+
+          +--+--+--+--+--+--+--+--+
+          | Res |F6|F5|F4|F3|F2|F1|
+          +--+--+--+--+--+--+--+--+
+
+        Res - These bits are reserved. Zero on transmission.
+          Ignored on receipt.
+        F1 - Corresponds to the PDR.
+        F2 - Corresponds to the PBS.
+        F3 - Corresponds to the CDR.
+        F4 - Corresponds to the CBS.
+        F5 - Corresponds to the EBS.
+        F6 - Corresponds to the Weight.
+
+        Each flag if is a Negotiable Flag corresponding to a
+          Traffic Parameter. The Negotiable Flag value zero
+          denotes Not Negotiable and value one denotes
+          Negotiable."
+    REFERENCE
+        "1. Section 4.3, Constraint-Based LSP Setup using
+          LDP, Jamoussi (Editor), RFC 3212, January 2002"
+    DEFVAL { 0 }
+    ::= { mplsTunnelCRLDPResEntry 5 }
+
+mplsTunnelCRLDPResRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table.  When a row in this
+          table is in active(1) state, no objects in that row
+          can be modified by the agent except
+          mplsTunnelCRLDPResRowStatus and
+          mplsTunnelCRLDPResStorageType."
+   ::= { mplsTunnelCRLDPResEntry 6 }
+
+mplsTunnelCRLDPResStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The storage type for this CR-LDP Resource entry.
+         Conceptual rows having the value 'permanent'
+         need not allow write-access to any columnar
+         objects in the row."
+   DEFVAL { volatile }
+   ::= { mplsTunnelCRLDPResEntry 7 }
+
+-- Notifications.
+
+mplsTunnelNotificationEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "If this object is true, then it enables the
+          generation of mplsTunnelUp and mplsTunnelDown
+          traps, otherwise these traps are not emitted."
+   DEFVAL { false }
+   ::= { mplsTeObjects 11 }
+
+mplsTunnelUp NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a
+          mplsTunnelOperStatus object for one of the
+          configured tunnels is about to leave the down state
+          and transition into some other state (but not into
+          the notPresent state).  This other state is
+          indicated by the included value of
+          mplsTunnelOperStatus."
+   ::= { mplsTeNotifications 1 }
+
+mplsTunnelDown NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a
+          mplsTunnelOperStatus object for one of the
+          configured tunnels is about to enter the down state
+          from some other state (but not from the notPresent
+          state).  This other state is indicated by the
+          included value of mplsTunnelOperStatus."
+   ::= { mplsTeNotifications 2 }
+
+mplsTunnelRerouted NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a tunnel is
+          rerouted. If the mplsTunnelARHopTable is used, then
+          this tunnel instance's entry in the
+          mplsTunnelARHopTable MAY contain the new path for
+          this tunnel some time after this trap is issued by
+          the agent."
+    ::= { mplsTeNotifications 3 }
+
+mplsTunnelReoptimized NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a tunnel is
+          reoptimized. If the mplsTunnelARHopTable is used,
+          then this tunnel instance's entry in the
+          mplsTunnelARHopTable MAY contain the new path for
+          this tunnel some time after this trap is issued by
+          the agent."
+    ::= { mplsTeNotifications 4 }
+
+-- End of notifications.
+
+-- Module compliance.
+
+mplsTeGroups
+   OBJECT IDENTIFIER ::= { mplsTeConformance 1 }
+
+mplsTeCompliances
+   OBJECT IDENTIFIER ::= { mplsTeConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+
+mplsTeModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+        "Compliance statement for agents that provide full
+          support the MPLS-TE-STD-MIB module."
+
+   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
+      MANDATORY-GROUPS {
+         ifGeneralInformationGroup,
+         ifCounterDiscontinuityGroup
+      }
+
+   MODULE -- this module
+
+      -- The mandatory group has to be implemented by all
+      -- LSRs that originate/terminate ESLSPs/tunnels.
+      -- In addition, depending on the type of tunnels
+      -- supported, other groups become mandatory as
+      -- explained below.
+
+      MANDATORY-GROUPS    {
+         mplsTunnelGroup,
+         mplsTunnelScalarGroup
+      }
+
+      GROUP mplsTunnelManualGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           manual configuration of tunnels."
+
+      GROUP mplsTunnelSignaledGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           signaled tunnel set up."
+
+      GROUP mplsTunnelIsNotIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+
+           tunnels that are not interfaces."
+
+      GROUP mplsTunnelIsIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are interfaces."
+
+      GROUP mplsTunnelCRLDPResOptionalGroup
+      DESCRIPTION
+          "Objects in this group are required by
+           implementations supporting the CR-LDP protocol for
+           signalling of TE tunnels."
+
+      GROUP mplsTeNotificationGroup
+      DESCRIPTION "This group is mandatory for those implementations
+                   which can implement the notifications
+                   contained in this group."
+
+      OBJECT       mplsTunnelRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is not
+                   required."
+
+      OBJECT      mplsTunnelHopRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is not
+                   required."
+
+      OBJECT      mplsTunnelCRLDPResRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is
+                   not required."
+   ::= { mplsTeCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+
+mplsTeModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+        "Compliance requirement for implementations that only
+          provide read-only support for MPLS-TE-STD-MIB.
+          Such devices can then be monitored but cannot be
+          configured using this MIB modules."
+
+   MODULE -- this module
+
+      -- mplsTunnelTable
+
+      MANDATORY-GROUPS    {
+         mplsTunnelGroup,
+         mplsTunnelScalarGroup
+      }
+
+      GROUP mplsTunnelManualGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           manual configuration of tunnels."
+
+      GROUP mplsTunnelSignaledGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           signaled tunnel set up."
+
+      GROUP mplsTunnelIsNotIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are not interfaces."
+
+      GROUP mplsTunnelIsIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are interfaces."
+
+      GROUP mplsTunnelCRLDPResOptionalGroup
+      DESCRIPTION
+          "Objects in this group are required by
+           implementations supporting the CR-LDP protocol for
+           signalling of TE tunnels."
+
+      GROUP mplsTeNotificationGroup
+      DESCRIPTION "This group is mandatory for those implementations
+                   which can implement the notifications
+                   contained in this group."
+
+      -- mplsTunnelTable
+
+      OBJECT      mplsTunnelName
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelDescr
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIsIf
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIfIndex
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelXCPointer
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelSignallingProto
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelSetupPrio
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHoldingPrio
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelSessionAttributes
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelLocalProtectInUse
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourcePointer
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelInstancePriority
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopTableIndex
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIncludeAnyAffinity
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIncludeAllAffinity
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelExcludeAnyAffinity
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelPathInUse
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelRole
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelAdminStatus
+      SYNTAX      INTEGER { up (1), down (2) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Only up and down states must be supported. Write
+           access is not required."
+
+      OBJECT      mplsTunnelRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      -- mplsTunnelHopTable
+
+      OBJECT      mplsTunnelHopAddrType
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelHopIpAddr
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelHopIpPrefixLen
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopAddrUnnum
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopAsNumber
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopLspId
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopType
+      SYNTAX      INTEGER { strict(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "loose(2) need not be supported. Write access is
+           not required."
+
+      OBJECT      mplsTunnelHopInclude
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelHopPathOptionName
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelHopEntryPathComp
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelHopRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelHopStorageType
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+
+      -- mplsTunnelResourceTable
+
+      OBJECT      mplsTunnelResourceMaxRate
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceMeanRate
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceMaxBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceMeanBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceExBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceFrequency
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceWeight
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelResourceStorageType
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+
+      -- mplsTunnelCRLDPResTable
+
+      OBJECT      mplsTunnelCRLDPResMeanBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResExBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResFrequency
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResWeight
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResFlags
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResStorageType
+      MIN-ACCESS   read-only
+      DESCRIPTION "Write access is not required."
+   ::= { mplsTeCompliances 2 }
+
+-- Units of conformance.
+
+mplsTunnelGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelIndexNext,
+      mplsTunnelName,
+      mplsTunnelDescr,
+      mplsTunnelOwner,
+      mplsTunnelXCPointer,
+      mplsTunnelIfIndex,
+      mplsTunnelHopTableIndex,
+      mplsTunnelARHopTableIndex,
+      mplsTunnelCHopTableIndex,
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus,
+      mplsTunnelRowStatus,
+      mplsTunnelNotificationEnable,
+      mplsTunnelStorageType,
+      mplsTunnelConfigured,
+      mplsTunnelActive,
+      mplsTunnelPrimaryInstance,
+      mplsTunnelPrimaryUpTime,
+      mplsTunnelPathChanges,
+      mplsTunnelLastPathChange,
+      mplsTunnelCreationTime,
+      mplsTunnelStateTransitions,
+      mplsTunnelIncludeAnyAffinity,
+      mplsTunnelIncludeAllAffinity,
+      mplsTunnelExcludeAnyAffinity,
+      mplsTunnelPerfPackets,
+      mplsTunnelPerfHCPackets,
+      mplsTunnelPerfErrors,
+      mplsTunnelPerfBytes,
+      mplsTunnelPerfHCBytes,
+      mplsTunnelResourcePointer,
+      mplsTunnelInstancePriority,
+      mplsTunnelPathInUse,
+      mplsTunnelRole,
+      mplsTunnelTotalUpTime,
+      mplsTunnelInstanceUpTime,
+      mplsTunnelResourceIndexNext,
+      mplsTunnelResourceMaxRate,
+      mplsTunnelResourceMeanRate,
+      mplsTunnelResourceMaxBurstSize,
+      mplsTunnelResourceMeanBurstSize,
+      mplsTunnelResourceExBurstSize,
+      mplsTunnelResourceFrequency,
+      mplsTunnelResourceWeight,
+      mplsTunnelResourceRowStatus,
+      mplsTunnelResourceStorageType,
+      mplsTunnelARHopAddrType,
+      mplsTunnelARHopIpAddr,
+      mplsTunnelARHopAddrUnnum,
+      mplsTunnelARHopLspId,
+      mplsTunnelCHopAddrType,
+      mplsTunnelCHopIpAddr,
+      mplsTunnelCHopIpPrefixLen,
+      mplsTunnelCHopAsNumber,
+      mplsTunnelCHopAddrUnnum,
+      mplsTunnelCHopLspId,
+      mplsTunnelCHopType
+   }
+   STATUS  current
+   DESCRIPTION
+        "Necessary, but not sufficient, set of objects to
+          implement tunnels.  In addition, depending on the
+          type of the tunnels supported (for example,
+          manually configured or signaled, persistent or non-
+          persistent, etc.), the following other groups
+          defined below are mandatory: mplsTunnelManualGroup
+          and/or mplsTunnelSignaledGroup,
+          mplsTunnelIsNotIntfcGroup and/or
+          mplsTunnelIsIntfcGroup."
+   ::= { mplsTeGroups 1 }
+
+mplsTunnelManualGroup  OBJECT-GROUP
+   OBJECTS { mplsTunnelSignallingProto }
+   STATUS  current
+   DESCRIPTION
+        "Object(s) needed to implement manually configured
+          tunnels."
+   ::= { mplsTeGroups 2 }
+
+mplsTunnelSignaledGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelSetupPrio,
+      mplsTunnelHoldingPrio,
+      mplsTunnelSignallingProto,
+      mplsTunnelLocalProtectInUse,
+      mplsTunnelSessionAttributes,
+      mplsTunnelHopListIndexNext,
+      mplsTunnelHopAddrType,
+      mplsTunnelHopIpAddr,
+      mplsTunnelHopIpPrefixLen,
+      mplsTunnelHopAddrUnnum,
+      mplsTunnelHopAsNumber,
+      mplsTunnelHopLspId,
+      mplsTunnelHopType,
+      mplsTunnelHopInclude,
+      mplsTunnelHopPathOptionName,
+      mplsTunnelHopEntryPathComp,
+      mplsTunnelHopRowStatus,
+      mplsTunnelHopStorageType
+   }
+   STATUS  current
+   DESCRIPTION
+        "Objects needed to implement signaled tunnels."
+   ::= { mplsTeGroups 3 }
+
+mplsTunnelScalarGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelConfigured,
+      mplsTunnelActive,
+      mplsTunnelTEDistProto,
+      mplsTunnelMaxHops,
+      mplsTunnelNotificationMaxRate
+   }
+   STATUS  current
+   DESCRIPTION
+        "Scalar object needed to implement MPLS tunnels."
+   ::= { mplsTeGroups 4 }
+
+mplsTunnelIsIntfcGroup OBJECT-GROUP
+   OBJECTS { mplsTunnelIsIf }
+   STATUS  current
+   DESCRIPTION
+        "Objects needed to implement tunnels that are
+          interfaces."
+   ::= { mplsTeGroups 5 }
+
+mplsTunnelIsNotIntfcGroup OBJECT-GROUP
+   OBJECTS { mplsTunnelIsIf }
+   STATUS  current
+   DESCRIPTION
+        "Objects needed to implement tunnels that are not
+          interfaces."
+   ::= { mplsTeGroups 6 }
+
+mplsTunnelCRLDPResOptionalGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelCRLDPResMeanBurstSize,
+      mplsTunnelCRLDPResExBurstSize,
+      mplsTunnelCRLDPResFrequency,
+      mplsTunnelCRLDPResWeight,
+      mplsTunnelCRLDPResFlags,
+      mplsTunnelCRLDPResRowStatus,
+      mplsTunnelCRLDPResStorageType
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of objects implemented for resources applicable
+          for tunnels signaled using CR-LDP."
+   ::= { mplsTeGroups 7 }
+
+mplsTeNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+      mplsTunnelUp,
+      mplsTunnelDown,
+      mplsTunnelRerouted,
+      mplsTunnelReoptimized
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of notifications implemented in this module.
+          None is mandatory."
+   ::= { mplsTeGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/MSDP-MIB.mib b/snmp_builder/mibs/MSDP-MIB.mib
new file mode 100644
index 0000000..8f24e08
--- /dev/null
+++ b/snmp_builder/mibs/MSDP-MIB.mib
@@ -0,0 +1,1182 @@
+MSDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    experimental, Counter32, Gauge32, TimeTicks, Integer32,
+    IpAddress
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue, TimeStamp, DisplayString
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF;
+
+msdpMIB MODULE-IDENTITY
+    LAST-UPDATED "200608010000Z"
+    ORGANIZATION "IETF MBONED Working Group"
+    CONTACT-INFO
+           "Bill Fenner
+            75 Willow Road
+            Menlo Park, CA  94025
+            Phone: +1 650 867 6073
+            E-mail: fenner@research.att.com
+
+            Dave Thaler
+            One Microsoft Way
+            Redmond, WA  98052
+            Phone: +1 425 703 8835
+            Email: dthaler@microsoft.com
+
+            MBONED Working Group: mboned@lists.uoregon.edu"
+    DESCRIPTION
+           "An experimental MIB module for MSDP Management and
+            Monitoring.
+
+            Copyright (C) The Internet Society 2006.  This version of
+            this MIB module is part of RFC 4624; see the RFC itself
+            for full legal notices."
+    REVISION "200608010000Z"
+    DESCRIPTION
+           "Initial version, published as RFC 4624."
+    ::= { experimental 92 }
+
+msdpMIBobjects OBJECT IDENTIFIER ::= { msdpMIB 1 }
+
+msdp           OBJECT IDENTIFIER ::= { msdpMIBobjects 1 }
+
+msdpEnabled OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The state of MSDP on this MSDP speaker - globally enabled
+            or disabled.
+
+            Changes to this object should be stored to non-volatile
+            memory."
+    ::= { msdp 1 }
+
+msdpCacheLifetime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The lifetime given to SA cache entries when created or
+            refreshed.  This is the [SG-State-Period] in the MSDP
+            spec.  A value of 0 means no SA caching is done by this
+            MSDP speaker.
+
+            Changes to this object should be stored to non-volatile
+            memory.
+
+            This object does not measure time per se; instead, it
+            is the delta from the time at which an SA message is
+            received at which it should be expired if not refreshed.
+            (i.e., it is the value of msdpSACacheExpiryTime
+            immediately after receiving an SA message applying to
+            that row.)  As such, TimeInterval would be a more
+            appropriate SYNTAX; it remains TimeTicks for backwards
+            compatibility."
+    REFERENCE "RFC 3618 section 5.3"
+    ::= { msdp 2 }
+
+msdpNumSACacheEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of entries in the SA Cache table."
+    ::= { msdp 3 }
+
+--
+-- The spec doesn't define SA-Hold-Down-Period any more.
+-- msdpSAHoldDownPeriod OBJECT-TYPE
+--     ::= { msdp 9 }
+
+-- This object was introduced in error, with a similar definition
+-- to msdpCacheLifetime.
+-- msdpSAStatePeriod OBJECT-TYPE
+--     ::= { msdp 10 }
+
+msdpRPAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The Rendezvous Point (RP) address used when sourcing
+            MSDP SA messages.  May be 0.0.0.0 on non-RPs.
+
+            Changes to this object should be stored to non-volatile
+            memory."
+    ::= { msdp 11 }
+
+--
+-- The MSDP Requests table
+-- SA Requests were removed from the MSDP spec, so this entire table
+-- is deprecated.
+
+msdpRequestsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MsdpRequestsEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The (conceptual) table listing group ranges and MSDP peers
+            used when deciding where to send an SA Request message, when
+            required.  If SA Requests are not enabled, this table may be
+            empty.
+
+            In order to choose a peer to whom to send an SA Request for
+            a given group, G, the subset of entries in this table whose
+            (msdpRequestsPeerType, msdpRequestsPeer) tuple represents a
+
+            peer whose msdpPeerState is established are examined.  The
+            set is further reduced by examining only those entries for
+            which msdpPeerRequestsGroupAddressType equals the address
+            type of G.  The entries with the highest value of
+            msdpRequestsGroupPrefix are considered, where the group G
+            falls within the range described by the combination of
+            msdpRequestsGroup and msdpRequestsGroupPrefix.  (This
+            sequence is commonly known as a 'longest-match' lookup.)
+
+            Finally, if multiple entries remain, the entry with the
+            lowest value of msdpRequestsPriority is chosen.  The SA
+            Request message is sent to the peer described by this row."
+       ::= { msdp 4 }
+
+msdpRequestsEntry OBJECT-TYPE
+    SYNTAX     MsdpRequestsEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "An entry (conceptual row) representing a group range
+            used when deciding where to send an SA Request
+            message."
+    INDEX { msdpRequestsGroupAddress, msdpRequestsGroupMask }
+    ::= { msdpRequestsTable 1 }
+
+MsdpRequestsEntry ::= SEQUENCE {
+        msdpRequestsGroupAddress  IpAddress,
+        msdpRequestsGroupMask     IpAddress,
+        msdpRequestsPeer          IpAddress,
+        msdpRequestsStatus        RowStatus
+    }
+
+msdpRequestsGroupAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The group address that, when combined with the mask
+            in this entry, represents the group range to which
+            this row applies."
+    ::= { msdpRequestsEntry 1 }
+
+msdpRequestsGroupMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The mask that, when combined with the group address
+
+            in this entry, represents the group range to which
+            this row applies."
+    ::= { msdpRequestsEntry 2 }
+
+msdpRequestsPeer OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The peer to which MSDP SA Requests for groups matching
+            this entry's group range will be sent.  This object,
+            combined with msdpRequestsPeerType, must match the INDEX
+            of a row in the msdpPeerTable, and to be considered,
+            this peer's msdpPeerState must be established."
+    ::= { msdpRequestsEntry 3 }
+
+msdpRequestsStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The status of this row, by which new rows may be added
+            to the table or old rows may be deleted."
+    ::= { msdpRequestsEntry 4 }
+
+--
+-- The MSDP Peer table
+--
+
+msdpPeerTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MsdpPeerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The (conceptual) table listing the MSDP speaker's peers."
+    ::= { msdp 5 }
+
+msdpPeerEntry OBJECT-TYPE
+    SYNTAX     MsdpPeerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry (conceptual row) representing an MSDP peer.
+
+            If row creation is supported, dynamically added rows are
+            added to the system's stable configuration (corresponding
+            to a StorageType value of nonVolatile).  "
+    INDEX      { msdpPeerRemoteAddress }
+    ::= { msdpPeerTable 1 }
+
+MsdpPeerEntry ::= SEQUENCE {
+        msdpPeerRemoteAddress              IpAddress,
+        msdpPeerState                      INTEGER,
+        msdpPeerRPFFailures                Counter32,
+        msdpPeerInSAs                      Counter32,
+        msdpPeerOutSAs                     Counter32,
+        msdpPeerInSARequests               Counter32,
+        msdpPeerOutSARequests              Counter32,
+        msdpPeerInSAResponses              Counter32,
+        msdpPeerOutSAResponses             Counter32,
+        msdpPeerInControlMessages          Counter32,
+        msdpPeerOutControlMessages         Counter32,
+        msdpPeerInDataPackets              Counter32,
+        msdpPeerOutDataPackets             Counter32,
+        msdpPeerFsmEstablishedTransitions  Counter32,
+        msdpPeerFsmEstablishedTime         TimeStamp,
+        msdpPeerInMessageTime              TimeStamp,
+        msdpPeerLocalAddress               IpAddress,
+        msdpPeerConnectRetryInterval       Integer32,
+        msdpPeerHoldTimeConfigured         Integer32,
+        msdpPeerKeepAliveConfigured        Integer32,
+        msdpPeerDataTtl                    Integer32,
+        msdpPeerProcessRequestsFrom        TruthValue,
+        msdpPeerStatus                     RowStatus,
+        msdpPeerRemotePort                 Integer32,
+        msdpPeerLocalPort                  Integer32,
+        msdpPeerEncapsulationType          INTEGER,
+        msdpPeerConnectionAttempts         Counter32,
+        msdpPeerInNotifications            Counter32,
+        msdpPeerOutNotifications           Counter32,
+        msdpPeerLastError                  OCTET STRING,
+        msdpPeerDiscontinuityTime          TimeStamp
+    }
+
+msdpPeerRemoteAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address of the remote MSDP peer."
+    ::= { msdpPeerEntry 1 }
+
+-- dunno what happened to 2.
+
+msdpPeerState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                         inactive(1),
+                         listen(2),
+                         connecting(3),
+                         established(4),
+                         disabled(5)
+                       }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The state of the MSDP TCP connection with this peer."
+    ::= { msdpPeerEntry 3 }
+
+msdpPeerRPFFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of SA messages received from this peer that
+            failed the Peer-RPF check.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 4 }
+
+msdpPeerInSAs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of MSDP SA messages received on this
+            connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 5 }
+
+msdpPeerOutSAs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of MSDP SA messages transmitted on this
+            connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 6 }
+
+msdpPeerInSARequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of MSDP SA-Request messages received on this
+            connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 7 }
+
+msdpPeerOutSARequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of MSDP SA-Request messages transmitted on
+            this connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 8 }
+
+msdpPeerInSAResponses OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of MSDP SA-Response messages received on this
+            connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 9 }
+
+msdpPeerOutSAResponses OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of MSDP SA Response messages transmitted on
+            this TCP connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 10 }
+
+msdpPeerInControlMessages OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of MSDP messages, excluding encapsulated
+            data packets, received on this TCP connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 11 }
+
+msdpPeerOutControlMessages OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of MSDP messages, excluding encapsulated
+            data packets, transmitted on this TCP connection.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 12 }
+
+msdpPeerInDataPackets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of encapsulated data packets received
+
+            from this peer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 13 }
+
+msdpPeerOutDataPackets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of encapsulated data packets sent to
+            this peer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            msdpPeerDiscontinuityTime."
+    ::= { msdpPeerEntry 14 }
+
+msdpPeerFsmEstablishedTransitions OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of times the MSDP FSM transitioned into
+            the ESTABLISHED state."
+    REFERENCE "RFC 3618 section 11"
+    ::= { msdpPeerEntry 15 }
+
+msdpPeerFsmEstablishedTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "This timestamp is set to the value of sysUpTime when a
+            peer transitions into or out of the ESTABLISHED state.
+            It is set to zero when the MSDP speaker is booted."
+    REFERENCE "RFC 3618 section 11"
+    ::= { msdpPeerEntry 16 }
+
+msdpPeerInMessageTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The sysUpTime value when the last MSDP message was
+            received from the peer.  It is set to zero when the MSDP
+            speaker is booted."
+    ::= { msdpPeerEntry 17 }
+
+msdpPeerLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The local IP address used for this entry's MSDP TCP
+            connection."
+    ::= { msdpPeerEntry 18 }
+
+-- msdpPeerSAAdvPeriod ([SA-Advertisement-Timer]) has been removed.
+--     ::= { msdpPeerEntry 19 }
+-- RFC 3618, Section 5.1, says it MUST be 60 seconds.
+
+msdpPeerConnectRetryInterval OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "Time interval, in seconds, for the [ConnectRetry-period]
+            for this peer."
+    REFERENCE "RFC 3618 section 5.6"
+    DEFVAL { 30 }
+    ::= { msdpPeerEntry 20 }
+
+msdpPeerHoldTimeConfigured OBJECT-TYPE
+    SYNTAX     Integer32 (0|3..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "Time interval, in seconds, for the [HoldTime-Period]
+            configured for this MSDP speaker with this peer.  If the
+            value of this object is zero (0), the MSDP connection is
+            never torn down due to the absence of messages from the
+            peer."
+    REFERENCE "RFC 3618 section 5.4"
+    DEFVAL { 75 }
+    ::= { msdpPeerEntry 21 }
+
+msdpPeerKeepAliveConfigured OBJECT-TYPE
+    SYNTAX     Integer32 (0|1..21845)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "Time interval, in seconds, for the [KeepAlive-Period]
+            configured for this MSDP speaker with this peer.  If the
+            value of this object is zero (0), no periodic KEEPALIVE
+            messages are sent to the peer after the MSDP connection
+            has been established."
+    REFERENCE "RFC 3618 section 5.5"
+    DEFVAL { 60 }
+    ::= { msdpPeerEntry 22 }
+
+msdpPeerDataTtl OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The minimum TTL a packet is required to have before it
+            may be forwarded using SA encapsulation to this peer."
+    DEFVAL { 1 }
+    ::= { msdpPeerEntry 23 }
+
+msdpPeerProcessRequestsFrom OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "This object indicates whether to process MSDP SA
+            Request messages from this peer.  If True(1), MSDP SA
+            Request messages from this peer are processed and replied
+            to (if appropriate) with SA Response messages.  If
+            False(2), MSDP SA Request messages from this peer are
+            silently ignored.  It defaults to False when
+            msdpCacheLifetime is 0 and to True when msdpCacheLifetime
+            is non-0.
+
+            This object is deprecated because MSDP SA Requests were
+            removed from the MSDP specification."
+    ::= { msdpPeerEntry 24 }
+
+msdpPeerStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The RowStatus object by which peers can be added and
+            deleted.  A transition to 'active' will cause the MSDP
+
+            'Enable MSDP peering with P' Event to be generated.  A
+            transition out of the 'active' state will cause the MSDP
+            'Disable MSDP peering with P' Event to be generated.
+            Care should be used in providing write access to this
+            object without adequate authentication.
+
+            msdpPeerRemoteAddress is the only variable that must be
+            set to a valid value before the row can be activated.
+            Since this is the table's INDEX, a row can be activated
+            by simply setting the msdpPeerStatus variable.
+
+            It is possible to modify other columns in the same
+            conceptual row when the status value is active(1)."
+    REFERENCE "RFC 3618 section 11.1"
+    ::= { msdpPeerEntry 25 }
+
+msdpPeerRemotePort OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remote port for the TCP connection between the MSDP
+            peers."
+    DEFVAL { 639 }
+    ::= { msdpPeerEntry 26 }
+
+msdpPeerLocalPort OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The local port for the TCP connection between the MSDP
+            peers."
+    DEFVAL { 639 }
+    ::= { msdpPeerEntry 27 }
+
+-- msdpPeerEncapsulationState has been removed
+-- because there is no longer an encapsulation
+-- state machine.
+--     ::= { msdpPeerEntry 28 }
+
+msdpPeerEncapsulationType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                         none(0),
+                         tcp(1)
+                       }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The encapsulation in use when encapsulating data in SA
+            messages to this peer."
+    ::= { msdpPeerEntry 29 }
+
+msdpPeerConnectionAttempts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of times the state machine has transitioned
+            from INACTIVE to CONNECTING."
+    ::= { msdpPeerEntry 30 }
+
+msdpPeerInNotifications OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of MSDP Notification messages received from
+            this peer.
+            This object is deprecated because MSDP Notifications have
+            been removed from the spec."
+    ::= { msdpPeerEntry 31 }
+
+msdpPeerOutNotifications OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of MSDP Notification messages transmitted to
+            this peer.
+
+            This object is deprecated because MSDP Notifications have
+            been removed from the spec."
+    ::= { msdpPeerEntry 32 }
+
+msdpPeerLastError OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (2))
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The last error code and subcode received via Notification
+            from this peer.  If no error has occurred, this field is
+            zero.  Otherwise, the first byte of this two-byte OCTET
+            STRING contains the O-bit and error code, and the second
+            byte contains the subcode.
+
+            This object is deprecated because MSDP Notifications have
+            been removed from the spec."
+    DEFVAL   { '0000'h }
+    ::= { msdpPeerEntry 33 }
+
+msdpPeerDiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at
+            which one or more of this entry's counters suffered a
+            discontinuity.  See the DESCRIPTION of each object to see
+            if it is expected to have discontinuities.  These
+            discontinuities may occur at peer connection
+            establishment.
+
+            If no such discontinuities have occurred since the last
+            reinitialization of the local management subsystem, then
+            this object contains a zero value."
+    ::= { msdpPeerEntry 34 }
+
+--
+-- The MSDP Source-Active Cache table
+--
+
+msdpSACacheTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MsdpSACacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The (conceptual) table listing the MSDP SA advertisements
+            currently in the MSDP speaker's cache."
+    ::= { msdp 6 }
+
+msdpSACacheEntry OBJECT-TYPE
+    SYNTAX     MsdpSACacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry (conceptual row) representing an MSDP SA
+            advertisement.  The INDEX to this table includes
+            msdpSACacheOriginRP for diagnosing incorrect MSDP
+            advertisements; normally, a Group and Source pair would
+            be unique.
+
+            Row creation is not permitted; msdpSACacheStatus may only
+            be used to delete rows from this table."
+    INDEX      { msdpSACacheGroupAddr, msdpSACacheSourceAddr,
+                 msdpSACacheOriginRP }
+    ::= { msdpSACacheTable 1 }
+
+MsdpSACacheEntry ::= SEQUENCE {
+        msdpSACacheGroupAddr        IpAddress,
+        msdpSACacheSourceAddr       IpAddress,
+        msdpSACacheOriginRP         IpAddress,
+        msdpSACachePeerLearnedFrom  IpAddress,
+        msdpSACacheRPFPeer          IpAddress,
+        msdpSACacheInSAs            Counter32,
+        msdpSACacheInDataPackets    Counter32,
+        msdpSACacheUpTime           TimeTicks,
+        msdpSACacheExpiryTime       TimeTicks,
+        msdpSACacheStatus           RowStatus
+    }
+
+msdpSACacheGroupAddr OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The group address of the SA Cache entry."
+    ::= { msdpSACacheEntry 1 }
+
+msdpSACacheSourceAddr OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The source address of the SA Cache entry."
+    ::= { msdpSACacheEntry 2 }
+
+msdpSACacheOriginRP OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The RP of the SA Cache entry.  This field is in the INDEX
+            in order to catch multiple RP's advertising the same
+            source and group."
+    ::= { msdpSACacheEntry 3 }
+
+msdpSACachePeerLearnedFrom OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The peer from which this SA Cache entry was last
+            accepted.  This address must correspond to the
+            msdpPeerRemoteAddress value for a row in the MSDP Peer
+            Table.  This should be 0.0.0.0 on the router that
+            originated the entry."
+    ::= { msdpSACacheEntry 4 }
+
+msdpSACacheRPFPeer OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The peer from which an SA message corresponding to this
+            cache entry would be accepted (i.e., the RPF peer for
+            msdpSACacheOriginRP).  This may be different than
+            msdpSACachePeerLearnedFrom if this entry was created by
+            an MSDP SA-Response.  This address must correspond to
+            the msdpPeerRemoteAddress value for a row in the MSDP
+            Peer Table, or it may be 0.0.0.0 if no RPF peer exists."
+    ::= { msdpSACacheEntry 5 }
+
+msdpSACacheInSAs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of MSDP SA messages received relevant to this
+            cache entry.  This object must be initialized to zero
+            when creating a cache entry."
+    ::= { msdpSACacheEntry 6 }
+
+msdpSACacheInDataPackets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of MSDP-encapsulated data packets received
+            relevant to this cache entry.  This object must be
+            initialized to zero when creating a cache entry."
+    ::= { msdpSACacheEntry 7 }
+
+msdpSACacheUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time since this entry was first placed in the SA
+            cache.
+
+            The first epoch is the time that the entry was first
+            placed in the SA cache, and the second epoch is the
+            current time."
+    ::= { msdpSACacheEntry 8 }
+
+msdpSACacheExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time remaining before this entry will expire from
+            the SA cache.
+
+            The first epoch is now, and the second epoch is the time
+            that the entry will expire."
+    ::= { msdpSACacheEntry 9 }
+
+msdpSACacheStatus OBJECT-TYPE
+    SYNTAX     RowStatus { active(1), destroy(6) }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The status of this row in the table.  The only allowable
+            actions are to retrieve the status, which will be
+            'active', or to set the status to 'destroy' in order to
+            remove this entry from the cache.
+
+            Row creation is not permitted.
+
+            No columnar objects are writable, so there are none that
+            may be changed while the status value is active(1)."
+    ::= { msdpSACacheEntry 10 }
+
+--
+-- MSDP Mesh Group Membership table
+--
+
+msdpMeshGroupTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MsdpMeshGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The (conceptual) table listing MSDP Mesh Group
+            configuration."
+    ::= { msdp 12 }
+
+msdpMeshGroupEntry OBJECT-TYPE
+    SYNTAX     MsdpMeshGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry (conceptual row) representing a peer in an MSDP
+            Mesh Group.
+
+            If row creation is supported, dynamically added rows are
+            added to the system's stable configuration
+            (corresponding to a StorageType value of nonVolatile)."
+    INDEX        { msdpMeshGroupName, msdpMeshGroupPeerAddress }
+    ::= { msdpMeshGroupTable 1 }
+
+MsdpMeshGroupEntry ::= SEQUENCE {
+        msdpMeshGroupName         DisplayString,
+        msdpMeshGroupPeerAddress  IpAddress,
+        msdpMeshGroupStatus       RowStatus
+    }
+
+msdpMeshGroupName OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(1..64))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The name of the mesh group."
+    ::= { msdpMeshGroupEntry 1 }
+
+msdpMeshGroupPeerAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A peer address that is a member of the mesh group with
+            name msdpMeshGroupName.  The msdpMeshGroupPeerAddress
+            must match a row in the msdpPeerTable."
+    ::= { msdpMeshGroupEntry 2 }
+
+msdpMeshGroupStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+               "This entry's status, by which new entries may be added
+               to the table and old entries deleted.
+
+               msdpMeshGroupName and msdpMeshGroupPeerAddress must be
+               set to valid values before the row can be activated.
+               Since these are the table's INDEX, a row can be activated
+
+               by simply setting the msdpMeshGroupStatus variable.
+
+               It is not possible to modify other columns in the same
+               conceptual row when the status value is active(1),
+               because the only other objects in the row are part of the
+               INDEX.  Changing one of these changes the row, so an old
+               row must be deleted and a new one created."
+       ::= { msdpMeshGroupEntry 3 }
+
+-- Traps
+
+msdpTraps   OBJECT IDENTIFIER ::= { msdp 0 }
+
+msdpEstablished NOTIFICATION-TYPE
+    OBJECTS { msdpPeerFsmEstablishedTransitions }
+    STATUS     current
+    DESCRIPTION
+           "The MSDP Established event is generated when the MSDP FSM
+            enters the ESTABLISHED state."
+    ::= { msdpTraps 1 }
+
+msdpBackwardTransition NOTIFICATION-TYPE
+    OBJECTS { msdpPeerState }
+    STATUS     current
+    DESCRIPTION
+           "The MSDPBackwardTransition Event is generated when the
+            MSDP FSM moves from a higher-numbered state to a
+            lower-numbered state."
+    ::= { msdpTraps 2 }
+
+-- conformance information
+
+msdpMIBConformance OBJECT IDENTIFIER ::= { msdp 8 }
+msdpMIBCompliances OBJECT IDENTIFIER ::= { msdpMIBConformance 1 }
+msdpMIBGroups      OBJECT IDENTIFIER ::= { msdpMIBConformance 2 }
+
+-- compliance statements
+
+msdpMIBCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for entities that implement a pre-
+            RFC version of MSDP.  This statement is deprecated because
+            it includes objects used for managing/monitoring aspects of
+            MSDP that were removed before it was published as an RFC."
+   MODULE  -- this module
+   MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup,
+                      msdpMIBNotificationGroup }
+
+       GROUP  msdpMIBEncapsulationGroup
+        DESCRIPTION
+           "This group is mandatory if MSDP encapsulation interfaces are
+            not given their own interface index numbers."
+       GROUP  msdpMIBSACacheGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker has the ability
+            to cache SA messages."
+        GROUP  msdpMIBRequestsGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker has the ability
+            to send SA-Request messages and to parse SA-Response
+                messages."
+        GROUP  msdpMIBRPGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker sources (as
+            opposed to forwards) MSDP messages."
+        GROUP  msdpMIBMeshGroupGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker can participate
+            in MSDP Mesh Groups."
+   ::= { msdpMIBCompliances 1 }
+
+msdpMIBFullCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "The compliance statement for entities that implement MSDP
+            (RFC3618)."
+   MODULE  -- this module
+   MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup2,
+                      msdpMIBSACacheGroup, msdpMIBEncapsulationGroup }
+        GROUP  msdpMIBRPGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker sources (as
+            opposed to forwards) MSDP messages."
+        GROUP  msdpMIBMeshGroupGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker can participate
+            in MSDP Mesh Groups."
+   ::= { msdpMIBCompliances 2 }
+
+msdpMIBReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "The compliance statement for entities that implement MSDP
+            (RFC3618), but do not permit configuration (or only permit
+
+            partial configuration) via SNMP."
+   MODULE  -- this module
+   MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup2,
+                      msdpMIBSACacheGroup, msdpMIBEncapsulationGroup }
+        GROUP  msdpMIBRPGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker sources (as
+            opposed to forwards) MSDP messages."
+        GROUP  msdpMIBMeshGroupGroup
+        DESCRIPTION
+           "This group is mandatory if the MSDP speaker can participate
+            in MSDP Mesh Groups."
+        OBJECT     msdpEnabled
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpCacheLifetime
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerLocalAddress
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerConnectRetryInterval
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerHoldTimeConfigured
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerKeepAliveConfigured
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerDataTtl
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpPeerEncapsulationType
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT     msdpSACacheStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpRPAddress
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+        OBJECT     msdpMeshGroupStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+           "Write access is not required."
+   ::= { msdpMIBCompliances 3 }
+
+-- units of conformance
+
+msdpMIBGlobalsGroup OBJECT-GROUP
+   OBJECTS { msdpEnabled }
+    STATUS     current
+    DESCRIPTION
+           "A collection of objects providing information on global MSDP
+            state."
+    ::= { msdpMIBGroups 1 }
+
+msdpMIBPeerGroup OBJECT-GROUP
+   OBJECTS { msdpPeerRPFFailures,
+             msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs,
+             msdpPeerInSARequests, msdpPeerOutSARequests,
+             msdpPeerInSAResponses, msdpPeerOutSAResponses,
+             msdpPeerInNotifications, msdpPeerOutNotifications,
+             msdpPeerInControlMessages, msdpPeerOutControlMessages,
+             msdpPeerFsmEstablishedTransitions,
+             msdpPeerFsmEstablishedTime,
+             msdpPeerLocalAddress,
+             msdpPeerRemotePort, msdpPeerLocalPort,
+             msdpPeerConnectRetryInterval,
+             msdpPeerHoldTimeConfigured,
+             msdpPeerKeepAliveConfigured,
+             msdpPeerInMessageTime,
+             msdpPeerProcessRequestsFrom,
+             msdpPeerConnectionAttempts,
+             msdpPeerLastError,
+             msdpPeerStatus,
+             msdpPeerDiscontinuityTime
+           }
+    STATUS     deprecated
+    DESCRIPTION
+           "A collection of objects for managing MSDP peers.  This group
+
+            is deprecated in favor of msdpMIBPeerGroup2 because it
+            contains objects for managing aspects of MSDP that were
+            removed before it was published as an RFC."
+    ::= { msdpMIBGroups 2 }
+
+msdpMIBEncapsulationGroup OBJECT-GROUP
+   OBJECTS { msdpPeerInDataPackets, msdpPeerOutDataPackets,
+             msdpPeerDataTtl,
+             msdpPeerEncapsulationType
+           }
+    STATUS     current
+    DESCRIPTION
+           "A collection of objects for managing encapsulations if the
+            MSDP encapsulation interfaces are not given interface
+            indices."
+    ::= { msdpMIBGroups 3 }
+
+msdpMIBSACacheGroup OBJECT-GROUP
+    OBJECTS { msdpCacheLifetime, msdpNumSACacheEntries,
+              msdpSACachePeerLearnedFrom,
+              msdpSACacheRPFPeer, msdpSACacheInSAs,
+              msdpSACacheInDataPackets,
+              msdpSACacheUpTime, msdpSACacheExpiryTime,
+              msdpSACacheStatus }
+    STATUS     current
+    DESCRIPTION
+           "A collection of objects for managing MSDP SA cache entries."
+    ::= { msdpMIBGroups 4 }
+
+msdpMIBNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { msdpEstablished,
+                    msdpBackwardTransition }
+    STATUS     current
+    DESCRIPTION
+           "A collection of notifications for signaling changes in MSDP
+            peer relationships."
+    ::= { msdpMIBGroups 5 }
+
+msdpMIBRequestsGroup OBJECT-GROUP
+    OBJECTS { msdpRequestsPeer, msdpRequestsStatus }
+    STATUS     deprecated
+    DESCRIPTION
+           "A collection of objects for managing MSDP Request
+            transmission.  This group is deprecated because Requests
+            were removed from MSDP before its publication as an RFC."
+    ::= { msdpMIBGroups 6 }
+
+msdpMIBRPGroup OBJECT-GROUP
+
+    OBJECTS { msdpRPAddress }
+    STATUS     current
+    DESCRIPTION
+           "A collection of objects for MSDP speakers that source MSDP
+            messages."
+    ::= { msdpMIBGroups 7 }
+
+msdpMIBMeshGroupGroup OBJECT-GROUP
+    OBJECTS { msdpMeshGroupStatus }
+    STATUS     current
+    DESCRIPTION
+           "A collection of objects for MSDP speakers that can
+            participate in MSDP mesh groups."
+    ::= { msdpMIBGroups 8 }
+
+msdpMIBPeerGroup2 OBJECT-GROUP
+   OBJECTS { msdpPeerRPFFailures,
+             msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs,
+             msdpPeerInSARequests, msdpPeerOutSARequests,
+             msdpPeerInControlMessages, msdpPeerOutControlMessages,
+             msdpPeerFsmEstablishedTransitions,
+             msdpPeerFsmEstablishedTime,
+             msdpPeerLocalAddress,
+             msdpPeerRemotePort, msdpPeerLocalPort,
+             msdpPeerConnectRetryInterval,
+             msdpPeerHoldTimeConfigured,
+             msdpPeerKeepAliveConfigured,
+             msdpPeerInMessageTime,
+             msdpPeerConnectionAttempts,
+             msdpPeerStatus,
+             msdpPeerDiscontinuityTime
+           }
+    STATUS     current
+    DESCRIPTION
+           "A collection of objects for managing MSDP peers."
+    ::= { msdpMIBGroups 9 }
+
+END
diff --git a/snmp_builder/mibs/MTA-MIB.mib b/snmp_builder/mibs/MTA-MIB.mib
new file mode 100644
index 0000000..29618ad
--- /dev/null
+++ b/snmp_builder/mibs/MTA-MIB.mib
@@ -0,0 +1,1226 @@
+MTA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2
+     FROM SNMPv2-SMI
+   TimeInterval
+     FROM SNMPv2-TC
+   MODULE-COMPLIANCE, OBJECT-GROUP
+     FROM SNMPv2-CONF
+   SnmpAdminString
+       FROM SNMP-FRAMEWORK-MIB
+   applIndex, URLString
+     FROM NETWORK-SERVICES-MIB;
+
+mta MODULE-IDENTITY
+   LAST-UPDATED "200003030000Z"
+   ORGANIZATION "IETF Mail and Directory Management Working Group"
+   CONTACT-INFO
+     "        Ned Freed
+
+      Postal: Innosoft International, Inc.
+              1050 Lakes Drive
+              West Covina, CA 91790
+              US
+
+      Tel: +1 626 919 3600
+      Fax: +1 626 919 3614
+
+      E-Mail: ned.freed@innosoft.com"
+   DESCRIPTION
+     "The MIB module describing Message Transfer Agents (MTAs)"
+   REVISION "200003030000Z"
+   DESCRIPTION
+     "This revision, published in RFC 2789, changes a number of
+      DisplayStrings to SnmpAdminStrings. Note that this change
+
+      is not strictly supported by SMIv2.  However, the alternative
+      of deprecating the old objects and defining new objects
+      would have a more adverse impact on backward compatibility
+      and interoperability, given the particular semantics of
+      these objects.  The defining reference for distinguished
+      names has also been updated from RFC 1779 to RFC 2253."
+   REVISION "199905120000Z"
+   DESCRIPTION
+     "This revision fixes a number of technical problems found in
+      previous versions: The conformance groups for different
+      versions of this MIB have been corrected, the recommendation
+      that an empty string be returned if the last operation was
+      successful has been removed from
+      mtaGroupInboundRejectionReason and
+      mtaGroupOutboundConnectFailureReason as it conflicts
+      with the stated purpose of these variables, and the
+      required mtaStatusCode entry has been added to
+      MtaGroupErrorEntry.  It should be noted that this last
+      change in no way affects the bits on the wire."
+   REVISION "199708170000Z"
+   DESCRIPTION
+     "This revision, published in RFC 2249, adds the
+      mtaGroupDescription and mtaGroupURL fields, conversion
+      operation counters, a group hierarchy description mechanism,
+      counters for specific errors, oldest message IDs, per-MTA
+      and per-group loop counters, and a new table for tracking
+      any errors an MTA encounters."
+   REVISION "199311280000Z"
+   DESCRIPTION
+     "The original version of this MIB was published in RFC 1566"
+   ::= {mib-2 28}
+
+mtaTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF MtaEntry
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The table holding information specific to an MTA."
+   ::= {mta 1}
+
+mtaEntry OBJECT-TYPE
+   SYNTAX MtaEntry
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The entry associated with each MTA."
+   INDEX {applIndex}
+   ::= {mtaTable 1}
+
+MtaEntry ::= SEQUENCE {
+   mtaReceivedMessages
+     Counter32,
+   mtaStoredMessages
+     Gauge32,
+   mtaTransmittedMessages
+     Counter32,
+   mtaReceivedVolume
+     Counter32,
+   mtaStoredVolume
+     Gauge32,
+   mtaTransmittedVolume
+     Counter32,
+   mtaReceivedRecipients
+     Counter32,
+   mtaStoredRecipients
+     Gauge32,
+   mtaTransmittedRecipients
+     Counter32,
+   mtaSuccessfulConvertedMessages
+     Counter32,
+   mtaFailedConvertedMessages
+     Counter32,
+   mtaLoopsDetected
+     Counter32
+}
+
+mtaReceivedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages received since MTA initialization.
+      This includes messages transmitted to this MTA from other
+      MTAs as well as messages that have been submitted to the
+      MTA directly by end-users or applications."
+   ::= {mtaEntry 1}
+
+mtaStoredMessages OBJECT-TYPE
+   SYNTAX Gauge32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of messages currently stored in the MTA.
+      This includes messages that are awaiting transmission to
+      some other MTA or are waiting for delivery to an end-user
+      or application."
+   ::= {mtaEntry 2}
+
+mtaTransmittedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages transmitted since MTA initialization.
+      This includes messages that were transmitted to some other
+      MTA or are waiting for delivery to an end-user or
+      application."
+   ::= {mtaEntry 3}
+
+mtaReceivedVolume OBJECT-TYPE
+   SYNTAX Counter32
+   UNITS "K-octets"
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total volume of messages received since MTA
+      initialization, measured in kilo-octets.  This volume should
+      include all transferred data that is logically above the mail
+      transport protocol level.  For example, an SMTP-based MTA
+      should use the number of kilo-octets in the message header
+      and body, while an X.400-based MTA should use the number of
+      kilo-octets of P2 data.  This includes messages transmitted
+      to this MTA from other MTAs as well as messages that have
+      been submitted to the MTA directly by end-users or
+      applications."
+   ::= {mtaEntry 4}
+
+mtaStoredVolume OBJECT-TYPE
+   SYNTAX Gauge32
+   UNITS "K-octets"
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total volume of messages currently stored in the MTA,
+      measured in kilo-octets.  This volume should include all
+      stored data that is logically above the mail transport
+      protocol level.  For example, an SMTP-based MTA should
+      use the number of kilo-octets in the message header and
+      body, while an X.400-based MTA would use the number of
+      kilo-octets of P2 data.  This includes messages that are
+      awaiting transmission to some other MTA or are waiting
+      for delivery to an end-user or application."
+   ::= {mtaEntry 5}
+
+mtaTransmittedVolume OBJECT-TYPE
+   SYNTAX Counter32
+   UNITS "K-octets"
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total volume of messages transmitted since MTA
+      initialization, measured in kilo-octets.  This volume should
+      include all transferred data that is logically above the mail
+      transport protocol level.  For example, an SMTP-based MTA
+      should use the number of kilo-octets in the message header
+      and body, while an X.400-based MTA should use the number of
+      kilo-octets of P2 data.  This includes messages that were
+      transmitted to some other MTA or are waiting for delivery
+      to an end-user or application."
+   ::= {mtaEntry 6}
+
+mtaReceivedRecipients OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of recipients specified in all messages
+      received since MTA initialization.  Recipients this MTA
+      has no responsibility for, i.e. inactive envelope
+      recipients or ones referred to in message headers,
+      should not be counted even if information about such
+      recipients is available.  This includes messages
+      transmitted to this MTA from other MTAs as well as
+      messages that have been submitted to the MTA directly
+      by end-users or applications."
+   ::= {mtaEntry 7}
+
+mtaStoredRecipients OBJECT-TYPE
+   SYNTAX Gauge32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of recipients specified in all messages
+      currently stored in the MTA.  Recipients this MTA has no
+      responsibility for, i.e. inactive envelope recipients or
+      ones referred to in message headers, should not be
+      counted.  This includes messages that are awaiting
+      transmission to some other MTA or are waiting for
+      delivery to an end-user or application."
+   ::= {mtaEntry 8}
+
+mtaTransmittedRecipients OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of recipients specified in all messages
+      transmitted since MTA initialization.  Recipients this
+      MTA had no responsibility for, i.e. inactive envelope
+      recipients or ones referred to in message headers,
+      should not be counted.  This includes messages that were
+      transmitted to some other MTA or are waiting for
+      delivery to an end-user or application."
+   ::= {mtaEntry 9}
+
+mtaSuccessfulConvertedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages that have been successfully
+      converted from one form to another since MTA
+      initialization."
+   ::= {mtaEntry 10}
+
+mtaFailedConvertedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages for which an unsuccessful
+      attempt was made to convert them from one form to
+      another since MTA initialization."
+   ::= {mtaEntry 11}
+
+mtaLoopsDetected OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "A message loop is defined as a situation where the MTA
+      decides that a given message will never be delivered to
+      one or more recipients and instead will continue to
+      loop endlessly through one or more MTAs.  This variable
+      counts the number of times the MTA has detected such a
+      situation since MTA initialization. Note that the
+      mechanism MTAs use to detect loops (e.g., trace field
+      counting, count of references to this MTA in a trace
+      field, examination of DNS or other directory information,
+      etc.), the level at which loops are detected (e.g., per
+      message, per recipient, per directory entry, etc.), and
+      the handling of a loop once it is detected (e.g., looping
+
+      messages are held, looping messages are bounced or sent
+      to the postmaster, messages that the MTA knows will loop
+      won't be accepted, etc.) vary widely from one MTA to the
+      next and cannot be inferred from this variable."
+   ::= {mtaEntry 12}
+
+-- MTAs typically group inbound reception, queue storage, and
+-- outbound transmission in some way, rather than accounting for
+-- such operations only across the MTA as a whole. In the most
+-- extreme case separate information will be maintained for each
+-- different entity that receives messages and for each entity
+-- the MTA stores messages for and delivers messages to.  Other
+-- MTAs may elect to treat all reception equally, all queue
+-- storage equally, all deliveries equally, or some combination
+-- of this. Overlapped groupings are also possible, where an MTA
+-- decomposes its traffic in different ways for different
+-- purposes.
+
+-- In any case, a grouping abstraction is an extremely useful for
+-- breaking down the activities of an MTA. For purposes of
+-- labelling this will be called a "group" in this MIB.
+
+-- Each group contains all the variables needed to monitor all
+-- aspects of an MTA's operation.  However, the fact that all
+-- groups contain all possible variables does not imply that all
+-- groups must use all possible variables. For example, a single
+-- group might be used to monitor only one kind of event (inbound
+-- processing, outbound processing, or storage). In this sort of
+-- configuration any counters that are unused as a result of a
+-- given MTA's use of the group construct must be inaccessible;
+-- e.g., returning either a noSuchName error (for an SNMPv1 get),
+-- or a noSuchInstance exception (for an SNMPv2 get).
+
+-- Groups can be created at any time after MTA initialization. Once
+-- a group is created it should not be deleted or its mtaGroupIndex
+-- changed unless the MTA is reinitialized.
+
+-- Groups are not necessarily mutually exclusive. A given event may
+-- be recorded by more than one group, a message may be seen as
+-- stored by more than one group, and so on.  Groups should be all
+-- inclusive, however: if groups are implemented all aspects of an
+-- MTA's operation should be registered in at least one group.
+-- This freedom lets implementors use different sets of groups to
+-- provide different "views" of an MTA.
+
+-- The possibility of overlap between groups means that summing
+-- variables across groups may not produce values equal to those in
+-- the mtaTable. mtaTable should always provide accurate information
+
+-- about the MTA as a whole.
+
+-- The term "channel" is often used in MTA implementations; channels
+-- are usually, but not always, equivalent to a group. However,
+-- this MIB does not use the term "channel" because there is no
+-- requirement that an MTA supporting this MIB has to map its
+-- "channel" abstraction one-to-one onto the MIB's group abstraction.
+
+-- An MTA may create a group or group of groups at any time. Once
+-- created, however, an MTA cannot delete an entry for a group from
+-- the group table.  Deletion is only allowed when the MTA is
+-- reinitialized, and is not required even then.  This restriction
+-- is imposed so that monitoring agents can rely on group
+-- assignments being consistent across multiple query operations.
+
+-- Groups may be laid out so as to form a hierarchical arrangement,
+-- with some groups acting as subgroups for other groups.
+-- Alternately, disjoint groups of groups may be used to provide
+-- different sorts of "snapshots" of MTA operation.  The
+-- mtaGroupHierarchy variable provides an indication of how each
+-- group fits into the overall arrangement being used.
+
+-- Note that SNMP also defines and uses term "group". MTA groups are
+-- NOT the same as SNMP groups.
+
+mtaGroupTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MtaGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+      "The table holding information specific to each MTA group."
+    ::= {mta 2}
+
+mtaGroupEntry OBJECT-TYPE
+    SYNTAX MtaGroupEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+      "The entry associated with each MTA group."
+    INDEX {applIndex, mtaGroupIndex}
+    ::= {mtaGroupTable 1}
+
+MtaGroupEntry ::= SEQUENCE {
+   mtaGroupIndex
+       INTEGER,
+   mtaGroupReceivedMessages
+       Counter32,
+   mtaGroupRejectedMessages
+
+       Counter32,
+   mtaGroupStoredMessages
+       Gauge32,
+   mtaGroupTransmittedMessages
+       Counter32,
+   mtaGroupReceivedVolume
+       Counter32,
+   mtaGroupStoredVolume
+       Gauge32,
+   mtaGroupTransmittedVolume
+       Counter32,
+   mtaGroupReceivedRecipients
+       Counter32,
+   mtaGroupStoredRecipients
+       Gauge32,
+   mtaGroupTransmittedRecipients
+       Counter32,
+   mtaGroupOldestMessageStored
+       TimeInterval,
+   mtaGroupInboundAssociations
+       Gauge32,
+   mtaGroupOutboundAssociations
+       Gauge32,
+   mtaGroupAccumulatedInboundAssociations
+       Counter32,
+   mtaGroupAccumulatedOutboundAssociations
+       Counter32,
+   mtaGroupLastInboundActivity
+       TimeInterval,
+   mtaGroupLastOutboundActivity
+       TimeInterval,
+   mtaGroupLastOutboundAssociationAttempt
+       TimeInterval,
+   mtaGroupRejectedInboundAssociations
+       Counter32,
+   mtaGroupFailedOutboundAssociations
+       Counter32,
+   mtaGroupInboundRejectionReason
+       SnmpAdminString,
+   mtaGroupOutboundConnectFailureReason
+       SnmpAdminString,
+   mtaGroupScheduledRetry
+       TimeInterval,
+   mtaGroupMailProtocol
+       OBJECT IDENTIFIER,
+   mtaGroupName
+       SnmpAdminString,
+   mtaGroupSuccessfulConvertedMessages
+
+       Counter32,
+   mtaGroupFailedConvertedMessages
+       Counter32,
+   mtaGroupDescription
+       SnmpAdminString,
+   mtaGroupURL
+       URLString,
+   mtaGroupCreationTime
+       TimeInterval,
+   mtaGroupHierarchy
+       INTEGER,
+   mtaGroupOldestMessageId
+       SnmpAdminString,
+   mtaGroupLoopsDetected
+       Counter32
+}
+
+mtaGroupIndex OBJECT-TYPE
+   SYNTAX INTEGER (1..2147483647)
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The index associated with a group for a given MTA."
+   ::= {mtaGroupEntry 1}
+
+mtaGroupReceivedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages received to this group since
+      group creation."
+   ::= {mtaGroupEntry 2}
+
+mtaGroupRejectedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages rejected by this group since
+      group creation."
+   ::= {mtaGroupEntry 3}
+
+mtaGroupStoredMessages OBJECT-TYPE
+   SYNTAX Gauge32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of messages currently stored in this
+      group's queue."
+   ::= {mtaGroupEntry 4}
+
+mtaGroupTransmittedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages transmitted by this group since
+      group creation."
+   ::= {mtaGroupEntry 5}
+
+mtaGroupReceivedVolume OBJECT-TYPE
+   SYNTAX Counter32
+   UNITS "K-octets"
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total volume of messages received to this group since
+      group creation, measured in kilo-octets.  This volume
+      should include all transferred data that is logically above
+      the mail transport protocol level.  For example, an
+      SMTP-based MTA should use the number of kilo-octets in the
+      message header and body, while an X.400-based MTA should use
+      the number of kilo-octets of P2 data."
+   ::= {mtaGroupEntry 6}
+
+mtaGroupStoredVolume OBJECT-TYPE
+   SYNTAX Gauge32
+   UNITS "K-octets"
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total volume of messages currently stored in this
+      group's queue, measured in kilo-octets.  This volume should
+      include all stored data that is logically above the mail
+      transport protocol level.  For example, an SMTP-based
+      MTA should use the number of kilo-octets in the message
+      header and body, while an X.400-based MTA would use the
+      number of kilo-octets of P2 data."
+   ::= {mtaGroupEntry 7}
+
+mtaGroupTransmittedVolume OBJECT-TYPE
+   SYNTAX Counter32
+   UNITS "K-octets"
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total volume of messages transmitted by this group
+      since group creation, measured in kilo-octets.  This
+      volume should include all transferred data that is logically
+      above the mail transport protocol level.  For example, an
+      SMTP-based MTA should use the number of kilo-octets in the
+      message header and body, while an X.400-based MTA should use
+      the number of kilo-octets of P2 data."
+   ::= {mtaGroupEntry 8}
+
+mtaGroupReceivedRecipients OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of recipients specified in all messages
+      received to this group since group creation.
+      Recipients this MTA has no responsibility for should not
+      be counted."
+   ::= {mtaGroupEntry 9}
+
+mtaGroupStoredRecipients OBJECT-TYPE
+   SYNTAX Gauge32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of recipients specified in all messages
+      currently stored in this group's queue.  Recipients this
+      MTA has no responsibility for should not be counted."
+   ::= {mtaGroupEntry 10}
+
+mtaGroupTransmittedRecipients OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of recipients specified in all messages
+      transmitted by this group since group creation.
+      Recipients this MTA had no responsibility for should not
+      be counted."
+   ::= {mtaGroupEntry 11}
+
+mtaGroupOldestMessageStored OBJECT-TYPE
+   SYNTAX TimeInterval
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Time since the oldest message in this group's queue was
+
+      placed in the queue."
+   ::= {mtaGroupEntry 12}
+
+mtaGroupInboundAssociations OBJECT-TYPE
+   SYNTAX Gauge32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of current associations to the group, where the
+      group is the responder."
+   ::= {mtaGroupEntry 13}
+
+mtaGroupOutboundAssociations OBJECT-TYPE
+   SYNTAX Gauge32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of current associations to the group, where the
+     group is the initiator."
+   ::= {mtaGroupEntry 14}
+
+mtaGroupAccumulatedInboundAssociations OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of associations to the group since
+     group creation, where the MTA was the responder."
+   ::= {mtaGroupEntry 15}
+
+mtaGroupAccumulatedOutboundAssociations OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of associations from the group since
+      group creation, where the MTA was the initiator."
+   ::= {mtaGroupEntry 16}
+
+mtaGroupLastInboundActivity OBJECT-TYPE
+   SYNTAX TimeInterval
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Time since the last time that this group had an active
+     inbound association for purposes of message reception."
+   ::= {mtaGroupEntry 17}
+
+mtaGroupLastOutboundActivity OBJECT-TYPE
+   SYNTAX TimeInterval
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Time since the last time that this group had a
+      successful outbound association for purposes of
+      message delivery."
+   ::= {mtaGroupEntry 18}
+
+mtaGroupLastOutboundAssociationAttempt OBJECT-TYPE
+   SYNTAX TimeInterval
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Time since the last time that this group attempted
+      to make an outbound association for purposes of
+      message delivery."
+   ::= {mtaGroupEntry 34}
+
+mtaGroupRejectedInboundAssociations OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number of inbound associations the group has
+     rejected, since group creation.  Rejected associations
+     are not counted in the accumulated association totals."
+   ::= {mtaGroupEntry 19}
+
+mtaGroupFailedOutboundAssociations OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The total number associations where the group was the
+     initiator and association establishment has failed,
+     since group creation.  Failed associations are
+     not counted in the accumulated association totals."
+   ::= {mtaGroupEntry 20}
+
+mtaGroupInboundRejectionReason OBJECT-TYPE
+   SYNTAX SnmpAdminString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The failure reason, if any, for the last association this
+     group refused to respond to. If no association attempt
+
+     has been made since the MTA was initialized the value
+     should be 'never'."
+   ::= {mtaGroupEntry 21}
+
+mtaGroupOutboundConnectFailureReason OBJECT-TYPE
+   SYNTAX SnmpAdminString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The failure reason, if any, for the last association attempt
+     this group initiated. If no association attempt has been
+     made since the MTA was initialized the value should be
+     'never'."
+   ::= {mtaGroupEntry 22}
+
+mtaGroupScheduledRetry OBJECT-TYPE
+   SYNTAX TimeInterval
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The amount of time until this group is next scheduled to
+      attempt to make an association."
+   ::= {mtaGroupEntry 23}
+
+mtaGroupMailProtocol OBJECT-TYPE
+   SYNTAX OBJECT IDENTIFIER
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "An identification of the protocol being used by this group.
+      For an group employing OSI protocols, this will be the
+      Application Context.    For Internet applications, OID
+      values of the form {applTCPProtoID port} or {applUDPProtoID
+      port} are used for TCP-based and UDP-based protocols,
+      respectively. In either case 'port' corresponds to the
+      primary port number being used by the protocol. The
+      usual IANA procedures may be used to register ports for
+      new protocols. applTCPProtoID and applUDPProtoID are
+      defined in the NETWORK-SERVICES-MIB, RFC 2788."
+   ::= {mtaGroupEntry 24}
+
+mtaGroupName OBJECT-TYPE
+   SYNTAX SnmpAdminString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "A descriptive name for the group. If this group connects to
+      a single remote MTA this should be the name of that MTA. If
+
+      this in turn is an Internet MTA this should be the domain
+      name.  For an OSI MTA it should be the string encoded
+      distinguished name of the managed object using the format
+      defined in RFC 2253.  For X.400(1984) MTAs which do not
+      have a Distinguished Name, the RFC 2156 syntax
+      'mta in globalid' used in X400-Received: fields can be
+      used."
+   ::= {mtaGroupEntry 25}
+
+mtaGroupSuccessfulConvertedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages that have been successfully
+      converted from one form to another in this group
+      since group creation."
+   ::= {mtaGroupEntry 26}
+
+mtaGroupFailedConvertedMessages OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "The number of messages for which an unsuccessful
+      attempt was made to convert them from one form to
+      another in this group since group creation."
+   ::= {mtaGroupEntry 27}
+
+mtaGroupDescription OBJECT-TYPE
+   SYNTAX SnmpAdminString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "A description of the group's purpose.  This information is
+      intended to identify the group in a status display."
+   ::= {mtaGroupEntry 28}
+
+mtaGroupURL OBJECT-TYPE
+   SYNTAX URLString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "A URL pointing to a description of the group.  This
+      information is intended to identify and briefly describe
+      the group in a status display."
+   ::= {mtaGroupEntry 29}
+
+mtaGroupCreationTime OBJECT-TYPE
+   SYNTAX TimeInterval
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Time since this group was first created."
+   ::= {mtaGroupEntry 30}
+
+mtaGroupHierarchy OBJECT-TYPE
+   SYNTAX INTEGER (-2147483648..2147483647)
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Describes how this group fits into the hierarchy. A
+      positive value is interpreted as an mtaGroupIndex
+      value for some other group whose variables include
+      those of this group (and usually others). A negative
+      value is interpreted as a group collection code: Groups
+      with common negative hierarchy values comprise one
+      particular breakdown of MTA activity as a whole. A
+      zero value means that this MIB implementation doesn't
+      implement hierarchy indicators and thus the overall
+      group hierarchy cannot be determined."
+   ::= {mtaGroupEntry 31}
+
+mtaGroupOldestMessageId OBJECT-TYPE
+   SYNTAX SnmpAdminString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Message ID of the oldest message in the group's queue.
+      Whenever possible this should be in the form of an
+      RFC 822 msg-id; X.400 may convert X.400 message
+      identifiers to this form by following the rules laid
+      out in RFC2156."
+   ::= {mtaGroupEntry 32}
+
+mtaGroupLoopsDetected OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "A message loop is defined as a situation where the MTA
+      decides that a given message will never be delivered to
+      one or more recipients and instead will continue to
+      loop endlessly through one or more MTAs.  This variable
+      counts the number of times the MTA has detected such a
+      situation in conjunction with something associated with
+
+      this group since group creation.  Note that the
+      mechanism MTAs use to detect loops (e.g., trace field
+      counting, count of references to this MTA in a trace
+      field, examination of DNS or other directory information,
+      etc.), the level at which loops are detected (e.g., per
+      message, per recipient, per directory entry, etc.), and
+      the handling of a loop once it is detected (e.g., looping
+      messages are held, looping messages are bounced or sent
+      to the postmaster, messages that the MTA knows will loop
+      won't be accepted, etc.) vary widely from one MTA to the
+      next and cannot be inferred from this variable."
+   ::= {mtaGroupEntry 33}
+
+-- The mtaGroupAssociationTable provides a means of correlating
+-- entries in the network services association table with the
+-- MTA group responsible for the association.
+
+mtaGroupAssociationTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF MtaGroupAssociationEntry
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The table holding information regarding the associations
+      for each MTA group."
+   ::= {mta 3}
+
+mtaGroupAssociationEntry OBJECT-TYPE
+   SYNTAX MtaGroupAssociationEntry
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The entry holding information regarding the associations
+      for each MTA group."
+   INDEX {applIndex, mtaGroupIndex, mtaGroupAssociationIndex}
+   ::= {mtaGroupAssociationTable 1}
+
+MtaGroupAssociationEntry ::= SEQUENCE {
+   mtaGroupAssociationIndex
+       INTEGER
+}
+
+mtaGroupAssociationIndex OBJECT-TYPE
+   SYNTAX INTEGER (1..2147483647)
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Reference into association table to allow correlation of
+      this group's active associations with the association table."
+   ::= {mtaGroupAssociationEntry 1}
+
+-- The mtaGroupErrorTable gives each group a way of tallying
+-- the specific errors it has encountered.  The mechanism
+-- defined here uses RFC 1893 status codes to identify
+-- various specific errors.  There are also classes for generic
+-- errors of various sorts, and the entire mechanism is also
+-- extensible, in that new error codes can be defined at any
+-- time.
+
+mtaGroupErrorTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF MtaGroupErrorEntry
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The table holding information regarding accumulated errors
+      for each MTA group."
+   ::= {mta 5}
+
+mtaGroupErrorEntry OBJECT-TYPE
+   SYNTAX MtaGroupErrorEntry
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "The entry holding information regarding accumulated
+      errors for each MTA group."
+   INDEX {applIndex, mtaGroupIndex, mtaStatusCode}
+   ::= {mtaGroupErrorTable 1}
+
+MtaGroupErrorEntry ::= SEQUENCE {
+   mtaStatusCode
+       INTEGER (4000000..5999999),
+   mtaGroupInboundErrorCount
+       Counter32,
+   mtaGroupInternalErrorCount
+       Counter32,
+   mtaGroupOutboundErrorCount
+       Counter32
+}
+
+mtaGroupInboundErrorCount OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Count of the number of errors of a given type that have
+      been accumulated in association with a particular group
+      while processing incoming messages. In the case of SMTP
+
+      these will typically be errors reporting by an SMTP
+      server to the remote client; in the case of X.400
+      these will typically be errors encountered while
+      processing an incoming message."
+   ::= {mtaGroupErrorEntry 1}
+
+mtaGroupInternalErrorCount OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Count of the number of errors of a given type that have
+      been accumulated in association with a particular group
+      during internal MTA processing."
+   ::= {mtaGroupErrorEntry 2}
+
+mtaGroupOutboundErrorCount OBJECT-TYPE
+   SYNTAX Counter32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+     "Count of the number of errors of a given type that have
+      been accumulated in association with a particular group's
+      outbound connection activities. In the case of an SMTP
+      client these will typically be errors reported while
+      attempting to contact or while communicating with the
+      remote SMTP server. In the case of X.400 these will
+      typically be errors encountered while constructing
+      or attempting to deliver an outgoing message."
+   ::= {mtaGroupErrorEntry 3}
+
+mtaStatusCode OBJECT-TYPE
+   SYNTAX INTEGER (4000000..5999999)
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+     "An index capable of representing an Enhanced Mail System
+      Status Code.  Enhanced Mail System Status Codes are
+      defined in RFC 1893.  These codes have the form
+
+          class.subject.detail
+
+      Here 'class' is either 2, 4, or 5 and both 'subject' and
+      'detail'  are integers in the range 0..999. Given a status
+      code the corresponding index value is defined to be
+      ((class * 1000) + subject) * 1000 + detail.  Both SMTP
+      error response codes and X.400 reason and diagnostic codes
+      can be mapped into these codes, resulting in a namespace
+
+      capable of describing most error conditions a mail system
+      encounters in a generic yet detailed way."
+   ::= {mtaGroupErrorEntry 4}
+
+-- Conformance information
+
+mtaConformance OBJECT IDENTIFIER ::= {mta 4}
+
+mtaGroups      OBJECT IDENTIFIER ::= {mtaConformance 1}
+mtaCompliances OBJECT IDENTIFIER ::= {mtaConformance 2}
+
+-- Compliance statements
+
+mtaCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 1566 implementations
+      which support the Mail Monitoring MIB for basic
+      monitoring of MTAs."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC1566Group}
+   ::= {mtaCompliances 1}
+
+mtaAssocCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 1566 implementations
+      which support the Mail Monitoring MIB for monitoring
+      of MTAs and their associations."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC1566Group, mtaRFC1566AssocGroup}
+   ::= {mtaCompliances 2}
+
+mtaRFC2249Compliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2249 implementations
+      which support the Mail Monitoring MIB for basic
+      monitoring of MTAs."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2249Group}
+   ::= {mtaCompliances 5}
+
+mtaRFC2249AssocCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2249 implementations
+
+      which support the Mail Monitoring MIB for monitoring of
+      MTAs and their associations."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2249Group, mtaRFC2249AssocGroup}
+   ::= {mtaCompliances 6}
+
+mtaRFC2249ErrorCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2249 implementations
+      which support the Mail Monitoring MIB for monitoring of
+      MTAs and detailed errors."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2249Group, mtaRFC2249ErrorGroup}
+   ::= {mtaCompliances 7}
+
+mtaRFC2249FullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2249 implementations
+      which support the full Mail Monitoring MIB for
+      monitoring of MTAs, associations, and detailed errors."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2249Group, mtaRFC2249AssocGroup,
+                       mtaRFC2249ErrorGroup}
+   ::= {mtaCompliances 8}
+
+mtaRFC2789Compliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2789 implementations
+      which support the Mail Monitoring MIB for basic
+      monitoring of MTAs."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2789Group}
+   ::= {mtaCompliances 9}
+
+mtaRFC2789AssocCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2789 implementations
+      which support the Mail Monitoring MIB for monitoring of
+      MTAs and their associations."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2789Group, mtaRFC2789AssocGroup}
+   ::= {mtaCompliances 10}
+
+mtaRFC2789ErrorCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2789 implementations
+      which support the Mail Monitoring MIB for monitoring of
+      MTAs and detailed errors."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2789Group, mtaRFC2789ErrorGroup}
+   ::= {mtaCompliances 11}
+
+mtaRFC2789FullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "The compliance statement for RFC 2789 implementations
+      which support the full Mail Monitoring MIB for
+      monitoring of MTAs, associations, and detailed errors."
+   MODULE  -- this module
+     MANDATORY-GROUPS {mtaRFC2789Group, mtaRFC2789AssocGroup,
+                       mtaRFC2789ErrorGroup}
+   ::= {mtaCompliances 12}
+
+-- Units of conformance
+
+mtaRFC1566Group OBJECT-GROUP
+   OBJECTS {
+     mtaReceivedMessages, mtaStoredMessages,
+     mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume,
+     mtaTransmittedVolume, mtaReceivedRecipients,
+     mtaStoredRecipients, mtaTransmittedRecipients,
+     mtaGroupReceivedMessages, mtaGroupRejectedMessages,
+     mtaGroupStoredMessages, mtaGroupTransmittedMessages,
+     mtaGroupReceivedVolume, mtaGroupStoredVolume,
+     mtaGroupTransmittedVolume, mtaGroupReceivedRecipients,
+     mtaGroupStoredRecipients, mtaGroupTransmittedRecipients,
+     mtaGroupOldestMessageStored, mtaGroupInboundAssociations,
+     mtaGroupOutboundAssociations,
+     mtaGroupAccumulatedInboundAssociations,
+     mtaGroupAccumulatedOutboundAssociations,
+     mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity,
+     mtaGroupRejectedInboundAssociations,
+     mtaGroupFailedOutboundAssociations,
+     mtaGroupInboundRejectionReason,
+     mtaGroupOutboundConnectFailureReason,
+     mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing basic monitoring of MTAs.
+      This is the original set of such objects defined in RFC
+      1566."
+   ::= {mtaGroups 10}
+
+mtaRFC1566AssocGroup OBJECT-GROUP
+   OBJECTS {
+     mtaGroupAssociationIndex}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing monitoring of MTA
+      associations.  This is the original set of such objects
+      defined in RFC 1566."
+   ::= {mtaGroups 11}
+
+mtaRFC2249Group OBJECT-GROUP
+   OBJECTS {
+     mtaReceivedMessages, mtaStoredMessages,
+     mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume,
+     mtaTransmittedVolume, mtaReceivedRecipients,
+     mtaStoredRecipients, mtaTransmittedRecipients,
+     mtaSuccessfulConvertedMessages, mtaFailedConvertedMessages,
+     mtaGroupReceivedMessages, mtaGroupRejectedMessages,
+     mtaGroupStoredMessages, mtaGroupTransmittedMessages,
+     mtaGroupReceivedVolume, mtaGroupStoredVolume,
+     mtaGroupTransmittedVolume, mtaGroupReceivedRecipients,
+     mtaGroupStoredRecipients, mtaGroupTransmittedRecipients,
+     mtaGroupOldestMessageStored, mtaGroupInboundAssociations,
+     mtaGroupOutboundAssociations, mtaLoopsDetected,
+     mtaGroupAccumulatedInboundAssociations,
+     mtaGroupAccumulatedOutboundAssociations,
+     mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity,
+     mtaGroupLastOutboundAssociationAttempt,
+     mtaGroupRejectedInboundAssociations,
+     mtaGroupFailedOutboundAssociations,
+     mtaGroupInboundRejectionReason,
+     mtaGroupOutboundConnectFailureReason,
+     mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName,
+     mtaGroupSuccessfulConvertedMessages,
+     mtaGroupFailedConvertedMessages, mtaGroupDescription,
+     mtaGroupURL, mtaGroupCreationTime, mtaGroupHierarchy,
+     mtaGroupOldestMessageId, mtaGroupLoopsDetected}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing basic monitoring of MTAs.
+      This group was originally defined in RFC 2249."
+   ::= {mtaGroups 4}
+
+mtaRFC2249AssocGroup OBJECT-GROUP
+   OBJECTS {
+     mtaGroupAssociationIndex}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing monitoring of MTA
+      associations.  This group was originally defined in RFC
+      2249."
+   ::= {mtaGroups 5}
+
+mtaRFC2249ErrorGroup OBJECT-GROUP
+   OBJECTS {
+     mtaGroupInboundErrorCount, mtaGroupInternalErrorCount,
+     mtaGroupOutboundErrorCount}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing monitoring of
+      detailed MTA errors.  This group was originally defined
+      in RFC 2249."
+   ::= {mtaGroups 6}
+
+mtaRFC2789Group OBJECT-GROUP
+   OBJECTS {
+     mtaReceivedMessages, mtaStoredMessages,
+     mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume,
+     mtaTransmittedVolume, mtaReceivedRecipients,
+     mtaStoredRecipients, mtaTransmittedRecipients,
+     mtaSuccessfulConvertedMessages, mtaFailedConvertedMessages,
+     mtaGroupReceivedMessages, mtaGroupRejectedMessages,
+     mtaGroupStoredMessages, mtaGroupTransmittedMessages,
+     mtaGroupReceivedVolume, mtaGroupStoredVolume,
+     mtaGroupTransmittedVolume, mtaGroupReceivedRecipients,
+     mtaGroupStoredRecipients, mtaGroupTransmittedRecipients,
+     mtaGroupOldestMessageStored, mtaGroupInboundAssociations,
+     mtaGroupOutboundAssociations, mtaLoopsDetected,
+     mtaGroupAccumulatedInboundAssociations,
+     mtaGroupAccumulatedOutboundAssociations,
+     mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity,
+     mtaGroupLastOutboundAssociationAttempt,
+     mtaGroupRejectedInboundAssociations,
+     mtaGroupFailedOutboundAssociations,
+     mtaGroupInboundRejectionReason,
+     mtaGroupOutboundConnectFailureReason,
+     mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName,
+     mtaGroupSuccessfulConvertedMessages,
+     mtaGroupFailedConvertedMessages, mtaGroupDescription,
+     mtaGroupURL, mtaGroupCreationTime, mtaGroupHierarchy,
+     mtaGroupOldestMessageId, mtaGroupLoopsDetected}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing basic monitoring of MTAs.
+
+      This is the appropriate group for RFC 2789."
+   ::= {mtaGroups 7}
+
+mtaRFC2789AssocGroup OBJECT-GROUP
+   OBJECTS {
+     mtaGroupAssociationIndex}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing monitoring of MTA
+      associations.  This is the appropriate group for RFC
+      2789 association monitoring."
+   ::= {mtaGroups 8}
+
+mtaRFC2789ErrorGroup OBJECT-GROUP
+   OBJECTS {
+     mtaGroupInboundErrorCount, mtaGroupInternalErrorCount,
+     mtaGroupOutboundErrorCount}
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing monitoring of
+      detailed MTA errors.  This is the appropriate group
+      for RFC 2789 error monitoring."
+   ::= {mtaGroups 9}
+
+END
diff --git a/snmp_builder/mibs/Modem-MIB.mib b/snmp_builder/mibs/Modem-MIB.mib
new file mode 100644
index 0000000..d92b011
--- /dev/null
+++ b/snmp_builder/mibs/Modem-MIB.mib
@@ -0,0 +1,1340 @@
+Modem-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+    Counter32, Integer32 FROM SNMPv2-SMI
+    DisplayString FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+    mib-2 FROM RFC1213-MIB;
+
+mdmMIB MODULE-IDENTITY
+    LAST-UPDATED "9406120000Z"
+    ORGANIZATION "IETF Modem Management Working Group"
+
+    CONTACT-INFO
+            "        Steven Waldbusser
+             Postal: Carnegie Mellon University
+                     5000 Forbes Ave
+                     Pittsburgh, PA, 15213
+                     US
+
+                Tel: +1 412 268 6628
+                Fax: +1 412 268 4987
+             E-mail: waldbusser@cmu.edu"
+    DESCRIPTION
+            "The MIB module for management of dial-up modems."
+    ::= { mdmMib 1 }
+
+mdmMib OBJECT IDENTIFIER ::= { mib-2 38 }
+
+mdmMIBObjects OBJECT IDENTIFIER ::= { mdmMIB 1 }
+
+-- conformance information
+
+mdmConformance OBJECT IDENTIFIER ::= { mdmMIB 2 }
+
+mdmCompliances OBJECT IDENTIFIER ::= { mdmConformance 1 }
+mdmGroups      OBJECT IDENTIFIER ::= { mdmConformance 2 }
+
+-- units of conformance
+
+mdmIDGroup    OBJECT-GROUP
+    OBJECTS   { mdmIDManufacturerOID, mdmIDProductDetails }
+    STATUS    current
+    DESCRIPTION
+            "A collection of objects that identify the manufacturer and
+            model information for a modem."
+    ::= { mdmGroups 1 }
+
+mdmLineInterfaceGroup    OBJECT-GROUP
+    OBJECTS { mdmLineCarrierLossTime,
+        mdmLineState, mdmLineCapabilitiesID,
+        mdmLineCapabilitiesEnableRequested,
+        mdmLineCapabilitiesEnableGranted }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects that describe the configuration and
+            state of the modem's line interface."
+    ::= { mdmGroups 2 }
+
+mdmDTEInterfaceGroup    OBJECT-GROUP
+
+    OBJECTS { mdmDTEActionDTROnToOff, mdmDTEActionDTROffToOn,
+                mdmDTESyncTimingSource, mdmDTESyncAsyncMode,
+                mdmDTEInactivityTimeout }
+    STATUS      current
+    DESCRIPTION
+            "A collection of objects that describe the configuration and
+            state of the modem's DTE interface."
+    ::= { mdmGroups 3 }
+
+mdmCallControlGroup    OBJECT-GROUP
+    OBJECTS { mdmCCRingsBeforeAnswer,
+        mdmCCCallSetUpFailTimer, mdmCCResultCodeEnable,
+        mdmCCEscapeAction, mdmCCCallDuration,
+        mdmCCConnectionFailReason, mdmCCStoredDialString }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects that describe the configuration of
+            call control capabilities on the modem and the status of
+            calls placed with this modem."
+    ::= { mdmGroups 4 }
+
+mdmErrorControlGroup   OBJECT-GROUP
+    OBJECTS { mdmECErrorControlUsed }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects that describe the configuration and
+            state of error control on a modem."
+    ::= { mdmGroups 5 }
+
+mdmDataCompressionGroup   OBJECT-GROUP
+    OBJECTS { mdmDCCompressionTypeUsed }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects that describe the configuration and
+            state of data compression on a modem."
+    ::= { mdmGroups 6 }
+
+mdmSignalConvertorGroup   OBJECT-GROUP
+OBJECTS { mdmSCCurrentLineReceiveRate, mdmSCCurrentLineTransmitRate,
+          mdmSCInitialLineReceiveRate, mdmSCInitialLineTransmitRate,
+          mdmSCModulationSchemeUsed }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects that describe the configuration and
+            state of error control on a modem."
+    ::= { mdmGroups 7 }
+
+mdmStatisticsGroup  OBJECT-GROUP
+
+    OBJECTS { mdmStatsRingNoAnswers,
+        mdmStatsIncomingConnectionFailures,
+        mdmStatsIncomingConnectionCompletions,
+        mdmStatsFailedDialAttempts,
+        mdmStatsOutgoingConnectionFailures,
+        mdmStatsOutgoingConnectionCompletions,
+        mdmStatsRetrains,
+        mdmStats2400OrLessConnections, mdmStats2400To14400Connections,
+        mdmStatsGreaterThan14400Connections,
+        mdmStatsErrorControlledConnections,
+        mdmStatsCompressedConnections,
+        mdmStatsCompressionEfficiency,
+        mdmStatsSentOctets, mdmStatsReceivedOctets,
+        mdmStatsSentDataFrames, mdmStatsReceivedDataFrames,
+        mdmStatsResentFrames, mdmStatsErrorFrames }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects that describe the state of calls on
+            this modem."
+    ::= { mdmGroups 8 }
+
+mdmNumber OBJECT-TYPE
+    SYNTAX  Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+            "The number of modem rows in the modem table.  This value
+            defines the maximum value of the mdmIndex object."
+    ::= { mdmMIBObjects 1 }
+
+-- The modem ID table.
+
+mdmIDTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmIDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The base table for the modems managed by this MIB.  The
+            mdmLineTable, mdmDTEInterfaceTable, mdmCallControlTable, and
+            mdmStatsTable all augment the rows defined in this table."
+    ::= { mdmMIBObjects 2 }
+
+mdmIDEntry OBJECT-TYPE
+    SYNTAX      MdmIDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+
+            entry exists for each modem managed by the agent."
+    INDEX       { mdmIndex }
+    ::= { mdmIDTable 1 }
+
+MdmIDEntry ::= SEQUENCE {
+    mdmIndex                Integer32,
+    mdmIDManufacturerOID    OBJECT IDENTIFIER,
+    mdmIDProductDetails     DisplayString
+}
+
+mdmIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A unique number for each modem that ranges from 1 to
+            mdmNumber.  The value must remain constant at least from one
+            re-initialization of the network management agent to the
+            next."
+    ::= { mdmIDEntry 1 }
+
+mdmIDManufacturerOID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This value is intended to identify the manufacturer, model,
+            and version of this modem.  This may be used to identify the
+            existance of enterprise-specific functions and behaviours."
+    REFERENCE
+            "V.58 attribute manufacturerID subfield ManufacturerOI"
+    ::= { mdmIDEntry 2 }
+
+mdmIDProductDetails OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..79))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual description of this device, including the
+            manufacturer's name, modem model name, hardware revision,
+            firmware revision, and optionally, its serial number.  The
+            exact format of this description is defined by the vendor.
+            This description may only contain characters from the NVT
+            ASCII character set."
+    REFERENCE
+            "V.58 attribute manufacturerID subfield productDetails"
+    ::= { mdmIDEntry 3 }
+
+-- The modem Line Interface Table
+
+mdmLineTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmLineEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem Line Table augments the modem ID table."
+    ::= { mdmMIBObjects 3 }
+
+mdmLineEntry OBJECT-TYPE
+    SYNTAX      MdmLineEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmLineTable 1 }
+
+MdmLineEntry ::= SEQUENCE {
+    mdmLineCarrierLossTime          Integer32,
+    mdmLineState                    INTEGER
+}
+
+mdmLineCarrierLossTime OBJECT-TYPE
+    SYNTAX      Integer32 (1..255)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Duration in 10ths of a second the modem waits after loss of
+            carrier before hanging up.  If this value is set to `255',
+            the modem will not hang up upon loss of carrier.  This
+            allows the modem to distinguish between a momentary lapse in
+            line quality and a true disconnect and can be useful to tune
+            the tolerance of the modem to lines of poor quality."
+    REFERENCE "V.58 lineSignalFailDisconnectTimer"
+    ::= { mdmLineEntry 1 }
+
+mdmLineState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    onHook(2),
+                    offHook(3),  -- and not connected
+                    connected(4),
+                    busiedOut(5),
+                    reset(6)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Allows the inspection and alteration of the state of the
+            modem.  Management commands may change the state to `on-
+            hook', `busied-out', or `reset' from any state.  No other
+            alterations are permitted from the management protocol.
+            When this object is set to reset, the modem shall be reset
+            and the value will change to the modem's new, implementation
+            dependent state."
+    ::= { mdmLineEntry 2 }
+
+mdmLineCapabilitiesTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmLineCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of protocol capabilities for this modem."
+    ::= { mdmMIBObjects 4 }
+
+mdmLineCapabilitiesEntry OBJECT-TYPE
+    SYNTAX      MdmLineCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A listing of the protocol(s) that this modem is capable of.
+            Entries in this table are created only by the agent.  One
+            entry exists for each protocol that the modem is capable of,
+            regardless of whether that protocol is enabled or not.
+
+            This table is useful for providing an inventory of the
+            capabilities on a modem, and allowing the manager to enable
+            or disable capabilities from the menu of available
+            possibilities.  Row creation is not required to enable or
+            disable capabilities."
+    INDEX       { mdmIndex, mdmLineCapabilitiesIndex }
+    ::= { mdmLineCapabilitiesTable 1 }
+
+MdmLineCapabilitiesEntry ::= SEQUENCE {
+    mdmLineCapabilitiesIndex            Integer32,
+    mdmLineCapabilitiesID               OBJECT IDENTIFIER,
+    mdmLineCapabilitiesEnableRequested  INTEGER,
+    mdmLineCapabilitiesEnableGranted    INTEGER
+}
+
+mdmLineCapabilitiesIndex OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A unique index for this capabilities entry."
+    ::= { mdmLineCapabilitiesEntry 1 }
+
+mdmLineCapabilitiesID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An identifier for this capability.  Standard protocol
+            capabilities will have identifiers registered in this
+            document or other companion standards documents.
+            Proprietary protocol capabilities will be registered by
+            their respective organization.  All capabilities, standard
+            or vendor-specific, shall be registered in this table."
+    ::= { mdmLineCapabilitiesEntry 2 }
+
+mdmLineCapabilitiesEnableRequested OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disabled(1),
+                    optional(2),
+                    preferred(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The requested configuration of this capability.  If this
+            value is 'disabled(1)', this is a request to disable this
+            protocol.  If this value is 'preferred(3)', this is a
+            request to enable this protocol, and to prefer it in any
+            negotiation over other appropriate protocols that have a
+            value of 'optional(2)'."
+    DEFVAL      { preferred }
+    ::= { mdmLineCapabilitiesEntry 3 }
+
+mdmLineCapabilitiesEnableGranted OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disabled(1),
+                    optional(2),
+                    preferred(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The actual configuration of this capability.  The agent
+            shall attempt to set this as close as possible to the
+            associated mdmLineCapabilitiesEnableRequested value.  The
+
+            agent shall make this determination in an implementation-
+            specific manner that may take into account the configuration
+            of other capabilities or other considerations.  The modem
+            will choose in an implementation-specific manner between
+            multiple mutually-exclusive capabilities that each have the
+            same (non-disabled) value.  However, the modem must prefer
+            all capabilities with a value of 'preferred(3)' over all
+            capabilities with a value of 'optional(2)'.
+
+            In other words, if there are one or more mutually-exclusive
+            capabilities (e.g. V.32 and V.32bis) that are set to
+            `preferred', the agent must choose one in an
+            implementation-specific manner.  Otherwise, if there are one
+            or more mutually-exclusive capabilities that are set to
+            `optional', the agent must choose one in an implementation-
+            specific manner."
+    ::= { mdmLineCapabilitiesEntry 4 }
+
+mdmLineCapabilities   OBJECT IDENTIFIER ::= { mdmMIBObjects 5 }
+
+mdmLineCapabilitiesV21 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.21"
+    ::= { mdmLineCapabilities 1 }
+
+mdmLineCapabilitiesV22 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.22"
+    ::= { mdmLineCapabilities 2 }
+
+mdmLineCapabilitiesV22bis OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.22bis"
+    ::= { mdmLineCapabilities 3 }
+
+mdmLineCapabilitiesV23CC OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.23CC"
+    ::= { mdmLineCapabilities 4 }
+
+mdmLineCapabilitiesV23SC OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.23SC"
+    ::= { mdmLineCapabilities 5 }
+
+mdmLineCapabilitiesV25bis OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.25bis"
+    ::= { mdmLineCapabilities 6 }
+
+mdmLineCapabilitiesV26bis OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.26bis"
+    ::= { mdmLineCapabilities 7 }
+
+mdmLineCapabilitiesV26ter OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.26ter"
+    ::= { mdmLineCapabilities 8 }
+
+mdmLineCapabilitiesV27ter OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.27ter"
+    ::= { mdmLineCapabilities 9 }
+
+mdmLineCapabilitiesV32 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.32"
+    ::= { mdmLineCapabilities 10 }
+
+mdmLineCapabilitiesV32bis OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.32bis"
+    ::= { mdmLineCapabilities 11 }
+
+mdmLineCapabilitiesV32terbo OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.32terbo"
+    ::= { mdmLineCapabilities 12 }
+
+mdmLineCapabilitiesVFC OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.FC"
+    ::= { mdmLineCapabilities 13 }
+
+mdmLineCapabilitiesV34 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.34"
+    ::= { mdmLineCapabilities 14 }
+
+mdmLineCapabilitiesV42 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.42"
+    ::= { mdmLineCapabilities 15 }
+
+mdmLineCapabilitiesV42bis OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.42bis"
+    ::= { mdmLineCapabilities 16 }
+
+mdmLineCapabilitiesMNP1 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP1"
+    ::= { mdmLineCapabilities 17 }
+
+mdmLineCapabilitiesMNP2 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP2"
+    ::= { mdmLineCapabilities 18 }
+
+mdmLineCapabilitiesMNP3 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP3"
+    ::= { mdmLineCapabilities 19 }
+
+mdmLineCapabilitiesMNP4 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP4"
+    ::= { mdmLineCapabilities 20 }
+
+mdmLineCapabilitiesMNP5 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP5"
+    ::= { mdmLineCapabilities 21 }
+
+mdmLineCapabilitiesMNP6 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP6"
+    ::= { mdmLineCapabilities 22 }
+
+mdmLineCapabilitiesMNP7 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP7"
+    ::= { mdmLineCapabilities 23 }
+
+mdmLineCapabilitiesMNP8 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP8"
+    ::= { mdmLineCapabilities 24 }
+
+mdmLineCapabilitiesMNP9 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP9"
+    ::= { mdmLineCapabilities 25 }
+
+mdmLineCapabilitiesMNP10 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "MNP10"
+    ::= { mdmLineCapabilities 26 }
+
+mdmLineCapabilitiesV29 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.29"
+    ::= { mdmLineCapabilities 27 }
+
+mdmLineCapabilitiesV33 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "ITU V.33"
+    ::= { mdmLineCapabilities 28 }
+
+mdmLineCapabilitiesBell208 OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+            "Bell 208"
+    ::= { mdmLineCapabilities 29 }
+
+-- DTE Interface Table
+
+mdmDTEInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmDTEInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem DTE Interface Table augments the modem ID table."
+    ::= { mdmMIBObjects 6 }
+
+mdmDTEInterfaceEntry OBJECT-TYPE
+    SYNTAX      MdmDTEInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmDTEInterfaceTable 1 }
+
+MdmDTEInterfaceEntry ::= SEQUENCE {
+    mdmDTEActionDTROnToOff      INTEGER,
+    mdmDTEActionDTROffToOn      INTEGER,
+    mdmDTESyncTimingSource      INTEGER,
+    mdmDTESyncAsyncMode         INTEGER,
+    mdmDTEInactivityTimeout     Integer32
+}
+
+mdmDTEActionDTROnToOff OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    ignore(1),
+                    escapeToCommandMode(2),
+                    disconnectCall(3),
+                    resetModem(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Defines the action the modem will take when DTR drops.
+
+            If the value is set to ignore(1), the modem takes no action
+            when DTR drops.  Typically, mdmDTEActionDTROffToOn would
+            also be set to ignore(1) if this object is set to ignore(1).
+
+            If the value is escapeToCommandMode(2), the modem remains
+
+            connected and enters command mode.  If the value is
+            disconnectCall(3), the current call (if any) is terminated
+            and the modem will not auto-answer while DTR is off.  If the
+            value is resetModem(4), the current call (if any) is
+            terminated and the modem is reset."
+    DEFVAL      { disconnectCall }
+    ::= { mdmDTEInterfaceEntry 1 }
+
+mdmDTEActionDTROffToOn OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    ignore(1),
+                    enableDial(2),
+                    autoAnswerEnable(3),
+                    establishConnection(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Defines the action the modem will take when DTR is raised.
+
+            If the value is set to ignore(1), the modem takes no action
+            when DTR is raised.  Typically, mdmDTEActionDTROnToOff would
+            also be set to ignore(1) if this object is set to ignore(1).
+
+            If the value is set to enableDial(2), the modem prepares to
+            dial an outgoing call.  If the value is set to
+            autoAnswerEnable(3), the modem will be configured to answer
+            any incoming call.  If the value is set to
+            establishConnection(4), the modem dials an implementation
+            specific number.
+
+            Immediately after any reset or power-on of the modem, if the
+            DTR is high, the action specified here will be executed."
+    DEFVAL      { autoAnswerEnable }
+    ::= { mdmDTEInterfaceEntry 2 }
+
+mdmDTESyncTimingSource OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    internal(1),
+                    external(2),
+                    loopback(3),
+                    network(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The clock source for synchronous transmissions.  If set to
+            internal(1), the modem is the clock source and sends the
+
+            clock signals to the DTE.  If set to external(2), the
+            transmit clock signals are provided by the DTE.  If
+            loopback(3), the modem receiver clock is used for the
+            transmit clock.  If network(4), the clock signals are
+            supplied by the DCE interface.
+
+            If the modem is not in synchronous mode, setting this object
+            will have no effect on the current operations of the modem."
+    REFERENCE   "V.58 transmitClockSource"
+    DEFVAL      { internal }
+    ::= { mdmDTEInterfaceEntry 3 }
+
+mdmDTESyncAsyncMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    async(1),
+                    sync(2),
+                    syncAfterDial(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The operational mode of the modem.  If the value is
+            syncAfterDial(3), the modem will accept commands in
+            asynchronous mode and change to synchronous mode to pass
+            data after a dial sequence has been executed."
+    DEFVAL      { async }
+    ::= { mdmDTEInterfaceEntry 4 }
+
+mdmDTEInactivityTimeout OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The amount of idle time in minutes that the modem will wait
+            before disconnecting a connection.  When a call is connected
+            and no data is transferred (continuous marking condition) on
+            both circuits 103 and 104 for the specified time, the DCE
+            disconnects the call. If the value is 0, no idle disconnect
+            will occur.  This function applies to asynchronous dial
+            operations only and is intended for administrative control
+            over idle connections."
+    REFERENCE   "V.58 inactivityTimerSelect"
+    DEFVAL { 0 }
+    ::= { mdmDTEInterfaceEntry 5 }
+
+-- The Call Control Table
+
+mdmCallControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmCallControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem Call Control Table augments the modem ID table."
+    ::= { mdmMIBObjects 7 }
+
+mdmCallControlEntry OBJECT-TYPE
+    SYNTAX      MdmCallControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmCallControlTable 1 }
+
+MdmCallControlEntry ::= SEQUENCE {
+    mdmCCRingsBeforeAnswer      Integer32,
+    mdmCCCallSetUpFailTimer     Integer32,
+    mdmCCResultCodeEnable       INTEGER,
+    mdmCCEscapeAction           INTEGER,
+    mdmCCCallDuration           Integer32,
+    mdmCCConnectionFailReason   INTEGER
+}
+
+mdmCCRingsBeforeAnswer OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Determines which ring the modem will wait to answer the
+            phone on.  If this value is `0', the modem will not go
+            offhook and answer a call when a ring signal is detected."
+    REFERENCE   "V.58 ringsBeforeAnswer"
+    DEFVAL      { 1 }
+    ::= { mdmCallControlEntry 1 }
+
+mdmCCCallSetUpFailTimer OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This parameter specifies the amount of time, in seconds,
+            that the modem shall allow between either answering a call
+            (automatically or manually) or completion of dialing, and
+            establishment of a connection with the remote modem. If no
+
+            connection is established during this time, the modem
+            disconnects from the line and returns a result code
+            indicating the cause of the disconnection. In TIA-602, this
+            is controlled by the value in the S7 register."
+    REFERENCE   "V.58 callSetUpFailTimer"
+    DEFVAL      { 30 }
+    ::= { mdmCallControlEntry 2 }
+
+mdmCCResultCodeEnable OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disabled(1),
+                    numericEnabled(2),
+                    verboseEnabled(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "When disabled, the DCE shall issue no 'result codes' of any
+            kind to the DTE either in response to unsolicited events
+            (eg. ring signal), or commands. In TIA-602, this is
+            controlled by the ATQ command.  When numericEnabled, the DCE
+            shall issue result codes in numeric form.  When
+            verboseEnabled, the DCE shall issue result codes in a
+            verbose, textual form."
+    REFERENCE   "V.58 responseModeSelect"
+    DEFVAL      { verboseEnabled }
+    ::= { mdmCallControlEntry 3 }
+
+mdmCCEscapeAction OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    ignoreEscape(1),
+                    hangUp(2),
+                    enterCommandMode(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The modem's action upon successfully recognizing the
+            'escape to command mode' character sequence."
+    DEFVAL { ignoreEscape }
+    ::= { mdmCallControlEntry 4 }
+
+-- Call status portion of the call control table
+
+mdmCCCallDuration OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Present or last completed connection time in seconds. If
+            there have been no previous connections, this value should
+            be -1."
+    ::= { mdmCallControlEntry 5 }
+
+mdmCCConnectionFailReason OBJECT-TYPE
+    SYNTAX      INTEGER {
+                -- General
+                        unknown(1),
+                        other(2),
+                        managementCommand(3),
+                        inactivityTimeout(4),
+                        mnpIncompatibility(5),
+                        protocolError(6),
+                -- DCE
+                        powerLoss(10),
+                        equipmentFailure(11),
+                -- DTE Interface
+                        dtrDrop(20),
+                -- Line Interface
+                        noDialTone(30),
+                        lineBusy(31),
+                        noAnswer(32),
+                        voiceDetected(33),
+                -- Signal Converter
+                        carrierLost(40),
+                        trainingFailed(41),
+                        faxDetected(42)
+        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Indicates the reason that the last connection or attempt
+            failed. The meaning of each reason code is explained below.
+
+               unknown:
+            This code means the failure reason is unknown or
+            there has been no previous call.
+
+               other:
+            This code used when no other code is applicable.
+            Additional vendor information may be available
+            elsewhere.
+
+               managementCommand:
+
+            A management command terminated the call.  These
+            commands include escaping to command mode, initiating
+            dialing, restoring lines, and disconnecting.
+
+               inactivityTimeout:
+            The call was terminated because it was inactive for
+            at the minimum duration specified.
+
+               mnpIncompatibility:
+            The modems are unable to resolve MNP protocol
+            differences.
+
+               protocolError:
+            An error occured in one of protocol in use.  Further
+            information is required to determine in which
+            protocol the error occurred, and the exact nature of
+            the error.
+
+               powerLoss:
+            The modem lost power and disconnected the call.
+
+               equipmentFailure:
+            The modem equipment failed.
+
+               dtrDrop:
+            DTR has been turned off while the modem is to
+            disconnect on DTR drop. (Ref: V.58 cct108TurnedOff)
+
+               noDialTone:
+            If the modem is to monitor for call progress tones,
+            but the modem has failed to detect dial tone while
+            attempting to dial a number.
+
+               lineBusy:
+            Busy signal is detected while busy signal detection
+            is enabled, or while the 'W' or '@' dial modifier is
+            used. (Ref: V.58 engagedTone)
+
+               noAnswer:
+            The call was not answered.
+
+               voiceDetected:
+            A voice was detected on the call.
+
+               carrierLost:
+            Indicates that the modem has disconnected due to
+            detection of loss of carrier.  In TIA-602, the S10
+            register determines the time that loss of carrier
+
+            must be detected before the modem disconnects.
+
+               trainingFailed:
+            Indicates that the modems did not successfully train
+            and reach data mode on the previous connection.
+
+               faxDetected:
+            A fax was detected on the call."
+    REFERENCE   "V.58 callCleared"
+    ::= { mdmCallControlEntry 6 }
+
+-- The Stored Dial String table
+
+mdmCCStoredDialStringTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmCCStoredDialStringEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The table of stored dial strings."
+    REFERENCE   "V.58 telephoneNumbers"
+    ::= { mdmMIBObjects 8 }
+
+mdmCCStoredDialStringEntry OBJECT-TYPE
+    SYNTAX      MdmCCStoredDialStringEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A stored dial string."
+    INDEX  { mdmIndex, mdmCCStoredDialStringIndex }
+    ::= { mdmCCStoredDialStringTable 1 }
+
+MdmCCStoredDialStringEntry ::= SEQUENCE {
+    mdmCCStoredDialStringIndex     Integer32,
+    mdmCCStoredDialString          DisplayString
+}
+
+mdmCCStoredDialStringIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The unique index of a particular dial string."
+    ::= { mdmCCStoredDialStringEntry 1 }
+
+mdmCCStoredDialString OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..64))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "A dial string stored in the modem."
+    ::= { mdmCCStoredDialStringEntry 2 }
+
+-- The modem Error Correcting Group
+
+mdmECTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmECEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem error correcting table augments the modem ID
+            table."
+    ::= { mdmMIBObjects 9 }
+
+mdmECEntry OBJECT-TYPE
+    SYNTAX      MdmECEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmECTable 1 }
+
+MdmECEntry ::= SEQUENCE {
+    mdmECErrorControlUsed           OBJECT IDENTIFIER
+}
+
+mdmECErrorControlUsed OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Indicates the error control method used during the current
+            or previous call.  This shall be one of the values for error
+            control protocols registered in the capabilities table for
+            this modem.  If no error control protocol is in use, this
+            object shall have the value '{0 0}'."
+    REFERENCE   "V.58 errorControlActive"
+    ::= { mdmECEntry 1 }
+
+-- The modem Data Compression Group
+
+mdmDCTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmDCEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem data compression table augments the modem ID
+            table."
+    ::= { mdmMIBObjects 10 }
+
+mdmDCEntry OBJECT-TYPE
+    SYNTAX      MdmDCEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmDCTable 1 }
+
+MdmDCEntry ::= SEQUENCE {
+    mdmDCCompressionTypeUsed        OBJECT IDENTIFIER
+}
+
+mdmDCCompressionTypeUsed OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Indicates the data compression method used during the
+            current or previous call.  This shall be one of the values
+            for compression protocols registered in the capabilities
+            table for this modem.  If no compression protocol is in use,
+            this object shall have the value '{0 0}'."
+    ::= { mdmDCEntry 1 }
+
+-- The modem Signal Convertor Group
+
+mdmSCTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmSCEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem signal convertor table augments the modem ID
+            table."
+    ::= { mdmMIBObjects 11 }
+
+mdmSCEntry OBJECT-TYPE
+    SYNTAX      MdmSCEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmSCTable 1 }
+
+MdmSCEntry ::= SEQUENCE {
+    mdmSCCurrentLineTransmitRate        Integer32,
+    mdmSCCurrentLineReceiveRate         Integer32,
+    mdmSCInitialLineTransmitRate        Integer32,
+    mdmSCInitialLineReceiveRate         Integer32,
+    mdmSCModulationSchemeUsed           OBJECT IDENTIFIER
+}
+
+mdmSCCurrentLineTransmitRate OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current link transmit rate of a connection, or the last
+            link transmit rate of the last connection in bits per
+            second."
+    REFERENCE   "V.58 transmissionSignallingRateActive"
+    ::= { mdmSCEntry 1 }
+
+mdmSCCurrentLineReceiveRate OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current link receive rate of a connection, or the last
+            link receive rate of the last connection in bits per
+            second."
+    REFERENCE   "V.58 transmissionSignallingRateActive"
+    ::= { mdmSCEntry 2 }
+
+mdmSCInitialLineTransmitRate OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The initial link transmit rate of the current connection,
+            or the initial link transmit rate of the last connection in
+            bits per second."
+    ::= { mdmSCEntry 3 }
+
+mdmSCInitialLineReceiveRate OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The initial link receive rate of the current connection, or
+            the initial link receive rate of the last connection in bits
+            per second."
+    ::= { mdmSCEntry 4 }
+
+mdmSCModulationSchemeUsed OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The modulation scheme of the current or previous call.
+            This shall be one of the values for modulation protocols
+            registered in the capabilities table for this modem."
+    REFERENCE   "V.58 gstnModulationSchemeActive"
+    ::= { mdmSCEntry 5 }
+
+-- The Modem Statistics Table
+
+mdmStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MdmStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The modem statistics Table augments the modem ID table."
+    ::= { mdmMIBObjects 12 }
+
+mdmStatsEntry OBJECT-TYPE
+    SYNTAX      MdmStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Entries in this table are created only by the agent. One
+            entry exists for each modem managed by the agent."
+    AUGMENTS    { mdmIDEntry }
+    ::= { mdmStatsTable 1 }
+
+MdmStatsEntry ::= SEQUENCE {
+    mdmStatsRingNoAnswers                   Counter32,
+    mdmStatsIncomingConnectionFailures      Counter32,
+    mdmStatsIncomingConnectionCompletions   Counter32,
+    mdmStatsFailedDialAttempts              Counter32,
+    mdmStatsOutgoingConnectionFailures      Counter32,
+    mdmStatsOutgoingConnectionCompletions   Counter32,
+    mdmStatsRetrains                        Counter32,
+    mdmStats2400OrLessConnections           Counter32,
+    mdmStats2400To14400Connections          Counter32,
+    mdmStatsGreaterThan14400Connections     Counter32,
+    mdmStatsErrorControlledConnections      Counter32,
+    mdmStatsCompressedConnections           Counter32,
+    mdmStatsCompressionEfficiency           Integer32,
+    mdmStatsSentOctets                      Counter32,
+    mdmStatsReceivedOctets                  Counter32,
+    mdmStatsSentDataFrames                  Counter32,
+    mdmStatsReceivedDataFrames              Counter32,
+    mdmStatsResentFrames                    Counter32,
+    mdmStatsErrorFrames                     Counter32
+}
+
+mdmStatsRingNoAnswers OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of events in which ringing was detected but the
+            call was not answered."
+    ::= { mdmStatsEntry 1 }
+
+mdmStatsIncomingConnectionFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of incoming connection requests that this modem
+            answered in which it could not train with the other DCE."
+    ::= { mdmStatsEntry 2 }
+
+mdmStatsIncomingConnectionCompletions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of incoming connection requests that this modem
+            answered and successfully trained with the other DCE."
+    ::= { mdmStatsEntry 3 }
+
+mdmStatsFailedDialAttempts OBJECT-TYPE
+        SYNTAX          Counter32
+        MAX-ACCESS  read-only
+        STATUS          current
+        DESCRIPTION
+                "The number of call attempts that failed because the modem
+        didn't go off hook, or there was no dialtone."
+        ::= { mdmStatsEntry 4 }
+
+mdmStatsOutgoingConnectionFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of outgoing calls from this modem which
+            sucessfully went off hook and dialed, in which it could not
+            train with the other DCE."
+    ::= { mdmStatsEntry 5 }
+
+mdmStatsOutgoingConnectionCompletions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of outgoing calls from this modem which resulted
+            in successfully training with the other DCE."
+    ::= { mdmStatsEntry 6 }
+
+mdmStatsRetrains OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of retrains experienced on connections on this
+            line."
+    ::= { mdmStatsEntry 7 }
+
+-- Utilization counters
+
+mdmStats2400OrLessConnections OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of connections initially established at a
+            modulation speed of 2400 bits per second or less."
+    ::= { mdmStatsEntry 8 }
+
+mdmStats2400To14400Connections OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of connections initially established at a
+            modulation speed of greater than 2400 bits per second and
+            less than 14400 bits per second."
+    ::= { mdmStatsEntry 9 }
+
+mdmStatsGreaterThan14400Connections OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of connections initially established at a
+            modulation speed of greater than 14400 bits per second."
+    ::= { mdmStatsEntry 10 }
+
+mdmStatsErrorControlledConnections OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of established connections using an error
+            control protocol."
+    ::= { mdmStatsEntry 11 }
+
+mdmStatsCompressedConnections OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of established connections using a compression
+            protocol."
+    ::= { mdmStatsEntry 12 }
+
+mdmStatsCompressionEfficiency OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of bytes transferred into the compression
+            encoder divided by the number of bytes transferred out of
+            the encoder, multiplied by 100 for either the current or
+            last call.  If a data compression protocol is not in use,
+            this value shall be `100'."
+    REFERENCE   "V.58 compressionEfficiency"
+    ::= { mdmStatsEntry 13 }
+
+mdmStatsSentOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets presented to the modem by the DTE."
+    ::= { mdmStatsEntry 14 }
+
+mdmStatsReceivedOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of octets presented to the DTE by the modem."
+    ::= { mdmStatsEntry 15 }
+
+mdmStatsSentDataFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of data frames sent on the line interface.  If
+            there is no frame-oriented protocol in use on the line
+            interface, this counter shall not increment."
+    ::= { mdmStatsEntry 16 }
+
+mdmStatsReceivedDataFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of data frames received on the line interface.
+            If there is no frame-oriented protocol in use on the line
+            interface, this counter shall not increment."
+    ::= { mdmStatsEntry 17 }
+
+mdmStatsResentFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times this modem retransmits frames on the
+            line interface.  If there is no frame-oriented protocol in
+            use on the line interface, this counter shall not
+            increment."
+    ::= { mdmStatsEntry 18 }
+
+mdmStatsErrorFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of block errors received on the link.  If there
+            is no frame-oriented protocol in use on the line interface,
+            this counter shall not increment."
+    ::= { mdmStatsEntry 19 }
+
+-- compliance statements
+
+mdmCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities which
+            implement the modem MIB."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { mdmIDGroup, mdmLineInterfaceGroup,
+                mdmDTEInterfaceGroup, mdmCallControlGroup,
+                mdmSignalConvertorGroup, mdmStatisticsGroup }
+
+        GROUP   mdmErrorControlGroup
+        DESCRIPTION
+            "This group is mandatory only for those modems that
+            implement an error correction protocol."
+
+        GROUP mdmDataCompressionGroup
+        DESCRIPTION
+            "This group is mandatory only for those modems that
+            implement a data compression protocol."
+    ::= { mdmCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/NAT-MIB.mib b/snmp_builder/mibs/NAT-MIB.mib
new file mode 100644
index 0000000..a0c608c
--- /dev/null
+++ b/snmp_builder/mibs/NAT-MIB.mib
@@ -0,0 +1,2391 @@
+NAT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     MODULE-IDENTITY,
+     OBJECT-TYPE,
+     Integer32,
+     Unsigned32,
+     Gauge32,
+     Counter64,
+     TimeTicks,
+     mib-2,
+     NOTIFICATION-TYPE
+             FROM SNMPv2-SMI
+     TEXTUAL-CONVENTION,
+     StorageType,
+     RowStatus
+
+             FROM SNMPv2-TC
+     MODULE-COMPLIANCE,
+     NOTIFICATION-GROUP,
+     OBJECT-GROUP
+             FROM SNMPv2-CONF
+     ifIndex,
+     ifCounterDiscontinuityGroup
+             FROM IF-MIB
+     SnmpAdminString
+             FROM SNMP-FRAMEWORK-MIB
+     InetAddressType,
+     InetAddress,
+     InetPortNumber
+             FROM INET-ADDRESS-MIB;
+
+natMIB MODULE-IDENTITY
+     LAST-UPDATED "200503210000Z"
+     ORGANIZATION "IETF Transport Area"
+     CONTACT-INFO
+              "
+               Rohit
+               Mascon Global Limited
+               #59/2 100 ft Ring Road
+               Banashankari II Stage
+               Bangalore 560 070
+               India
+               Phone: +91 80 2679 6227
+               Email: rrohit74@hotmail.com
+
+               P. Srisuresh
+               Caymas Systems, Inc.
+               1179-A North McDowell Blvd.
+               Petaluma, CA 94954
+               Tel: (707) 283-5063
+               Email: srisuresh@yahoo.com
+
+               Rajiv Raghunarayan
+               Cisco Systems Inc.
+               170 West Tasman Drive
+               San Jose, CA 95134
+               Phone: +1 408 853 9612
+               Email: raraghun@cisco.com
+
+               Nalinaksh Pai
+               Cisco Systems, Inc.
+               Prestige Waterford
+               No. 9, Brunton Road
+               Bangalore - 560 025
+
+               India
+               Phone: +91 80 532 1300
+               Email: npai@cisco.com
+
+               Cliff Wang
+               Information Security
+               Bank One Corp
+               1111 Polaris Pkwy
+               Columbus, OH 43240
+               Phone: +1 614 213 6117
+               Email: cliffwang2000@yahoo.com
+             "
+     DESCRIPTION
+             "This MIB module defines the generic managed objects
+              for NAT.
+
+              Copyright (C) The Internet Society (2005).  This version
+              of this MIB module is part of RFC 4008;  see the RFC
+              itself for full legal notices."
+     REVISION     "200503210000Z"  -- 21th March 2005
+     DESCRIPTION
+             "Initial version, published as RFC 4008."
+     ::= { mib-2 123 }
+
+natMIBObjects OBJECT IDENTIFIER ::= { natMIB 1 }
+
+NatProtocolType ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "A list of protocols that support the network
+                address translation.  Inclusion of the values is
+                not intended to imply that those protocols
+                need to be supported.  Any change in this
+                TEXTUAL-CONVENTION should also be reflected in
+                the definition of NatProtocolMap, which is a
+                BITS representation of this."
+       SYNTAX   INTEGER {
+                     none (1),  -- not specified
+                     other (2), -- none of the following
+                     icmp (3),
+                     udp (4),
+                     tcp (5)
+                  }
+
+NatProtocolMap ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "A bitmap of protocol identifiers that support
+
+                the network address translation.  Any change
+                in this TEXTUAL-CONVENTION should also be
+                reflected in the definition of NatProtocolType."
+       SYNTAX   BITS {
+                  other (0),
+                  icmp (1),
+                  udp (2),
+                  tcp (3)
+                }
+
+NatAddrMapId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS current
+       DESCRIPTION
+               "A unique id that is assigned to each address map
+                by a NAT enabled device."
+       SYNTAX   Unsigned32 (1..4294967295)
+
+NatBindIdOrZero ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS current
+       DESCRIPTION
+               "A unique id that is assigned to each bind by
+                a NAT enabled device.  The bind id will be zero
+                in the case of a Symmetric NAT."
+       SYNTAX   Unsigned32 (0..4294967295)
+
+NatBindId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS current
+       DESCRIPTION
+               "A unique id that is assigned to each bind by
+                a NAT enabled device."
+       SYNTAX   Unsigned32 (1..4294967295)
+
+NatSessionId ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS current
+       DESCRIPTION
+               "A unique id that is assigned to each session by
+                a NAT enabled device."
+       SYNTAX   Unsigned32 (1..4294967295)
+
+NatBindMode ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+               "An indication of whether the bind is
+                an address bind or an address port bind."
+       SYNTAX   INTEGER {
+                     addressBind (1),
+                     addressPortBind (2)
+                }
+
+NatAssociationType ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+               "An indication of whether the association is
+                static or dynamic."
+       SYNTAX   INTEGER {
+                     static (1),
+                     dynamic (2)
+                }
+
+NatTranslationEntity ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "An indication of a) the direction of a session for
+                which an address map entry, address bind or port
+                bind is applicable, and b) the entity (source or
+                destination) within the session that is subject to
+                translation."
+       SYNTAX   BITS {
+                  inboundSrcEndPoint (0),
+                  outboundDstEndPoint(1),
+                  inboundDstEndPoint (2),
+                  outboundSrcEndPoint(3)
+                }
+
+--
+-- Default Values for the Bind and NAT Protocol Timers
+--
+
+natDefTimeouts OBJECT IDENTIFIER ::= { natMIBObjects 1 }
+
+natNotifCtrl OBJECT IDENTIFIER ::= { natMIBObjects 2 }
+
+--
+-- Address Bind and Port Bind related NAT configuration
+--
+
+natBindDefIdleTimeout OBJECT-TYPE
+    SYNTAX     Unsigned32  (0..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default Bind (Address Bind or Port Bind) idle
+             timeout parameter.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system."
+    DEFVAL { 0 }
+    ::= { natDefTimeouts 1 }
+
+--
+-- UDP related NAT configuration
+--
+
+natUdpDefIdleTimeout OBJECT-TYPE
+    SYNTAX     Unsigned32  (1..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default UDP idle timeout parameter.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system."
+    DEFVAL { 300 }
+    ::= { natDefTimeouts 2 }
+
+--
+-- ICMP related NAT configuration
+--
+
+natIcmpDefIdleTimeout OBJECT-TYPE
+    SYNTAX     Unsigned32  (1..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default ICMP idle timeout parameter.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system."
+    DEFVAL { 300 }
+    ::= { natDefTimeouts 3 }
+
+--
+-- Other protocol parameters
+--
+
+natOtherDefIdleTimeout OBJECT-TYPE
+    SYNTAX     Unsigned32  (1..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default idle timeout parameter for protocols
+             represented by the value other (2) in
+             NatProtocolType.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system."
+    DEFVAL { 60 }
+    ::= { natDefTimeouts 4 }
+
+--
+-- TCP related NAT Timers
+--
+
+natTcpDefIdleTimeout OBJECT-TYPE
+    SYNTAX     Unsigned32  (1..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default time interval that a NAT session for an
+             established TCP connection is allowed to remain
+             valid without any activity on the TCP connection.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system."
+    DEFVAL { 86400 }
+    ::= { natDefTimeouts 5 }
+
+natTcpDefNegTimeout OBJECT-TYPE
+    SYNTAX     Unsigned32  (1..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default time interval that a NAT session for a TCP
+             connection that is not in the established state
+             is allowed to remain valid without any activity on
+             the TCP connection.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system."
+    DEFVAL { 60 }
+    ::= { natDefTimeouts 6 }
+
+natNotifThrottlingInterval OBJECT-TYPE
+    SYNTAX      Integer32 (0 | 5..3600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object controls the generation of the
+             natPacketDiscard notification.
+
+             If this object has a value of zero, then no
+             natPacketDiscard notifications will be transmitted by the
+             agent.
+
+             If this object has a non-zero value, then the agent must
+             not generate more than one natPacketDiscard
+             'notification-event' in the indicated period, where a
+             'notification-event' is the generation of a single
+             notification PDU type to a list of notification
+             destinations.  If additional NAT packets are discarded
+             within the throttling period, then notification-events
+             for these changes must be suppressed by the agent until
+             the current throttling period expires.
+
+             If natNotifThrottlingInterval notification generation
+             is enabled, the suggested default throttling period is
+             60 seconds, but generation of the natPacketDiscard
+             notification should be disabled by default.
+
+             If the agent is capable of storing non-volatile
+             configuration, then the value of this object must be
+             restored after a re-initialization of the management
+             system.
+
+             The actual transmission of notifications is controlled
+             via the MIB modules in RFC 3413."
+    DEFVAL { 0 }
+    ::= { natNotifCtrl 1 }
+
+--
+-- The NAT Interface Table
+--
+
+natInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NatInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table specifies the attributes for interfaces on a
+             device supporting NAT function."
+    ::= { natMIBObjects 3 }
+
+natInterfaceEntry OBJECT-TYPE
+    SYNTAX      NatInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Each entry in the natInterfaceTable holds a set of
+             parameters for an interface, instantiated by
+             ifIndex.  Therefore, the interface index must have been
+             assigned, according to the applicable procedures,
+             before it can be meaningfully used.
+             Generally, this means that the interface must exist.
+
+             When natStorageType is of type nonVolatile, however,
+             this may reflect the configuration for an interface whose
+             ifIndex has been assigned but for which the supporting
+             implementation is not currently present."
+    INDEX   { ifIndex }
+    ::= { natInterfaceTable 1 }
+
+NatInterfaceEntry ::= SEQUENCE {
+    natInterfaceRealm            INTEGER,
+    natInterfaceServiceType      BITS,
+    natInterfaceInTranslates     Counter64,
+    natInterfaceOutTranslates    Counter64,
+    natInterfaceDiscards         Counter64,
+    natInterfaceStorageType      StorageType,
+    natInterfaceRowStatus        RowStatus
+}
+
+natInterfaceRealm OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   private (1),
+                   public (2)
+
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "This object identifies whether this interface is
+             connected to the private or the public realm."
+    DEFVAL  { public }
+    ::= { natInterfaceEntry 1 }
+
+natInterfaceServiceType OBJECT-TYPE
+    SYNTAX  BITS {
+                basicNat (0),
+                napt (1),
+                bidirectionalNat (2),
+                twiceNat (3)
+            }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "An indication of the direction in which new sessions
+             are permitted and the extent of translation done within
+             the IP and transport headers."
+    ::= { natInterfaceEntry 2 }
+
+natInterfaceInTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Number of packets received on this interface that
+             were translated.
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natInterfaceEntry 3 }
+
+natInterfaceOutTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Number of translated packets that were sent out this
+             interface.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times as indicated by the value of
+
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natInterfaceEntry 4 }
+
+natInterfaceDiscards OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Number of packets that had to be rejected/dropped due to
+             a lack of resources for this interface.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+     ::= { natInterfaceEntry 5 }
+
+natInterfaceStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The storage type for this conceptual row.
+             Conceptual rows having the value 'permanent'
+             need not allow write-access to any columnar objects
+             in the row."
+    REFERENCE
+            "Textual Conventions for SMIv2, Section 2."
+    DEFVAL { nonVolatile }
+    ::= { natInterfaceEntry 6 }
+
+natInterfaceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this conceptual row.
+
+             Until instances of all corresponding columns are
+             appropriately configured, the value of the
+             corresponding instance of the natInterfaceRowStatus
+             column is 'notReady'.
+
+             In particular, a newly created row cannot be made
+             active until the corresponding instance of
+             natInterfaceServiceType has been set.
+
+             None of the objects in this row may be modified
+             while the value of this object is active(1)."
+    REFERENCE
+            "Textual Conventions for SMIv2, Section 2."
+    ::= { natInterfaceEntry 7 }
+
+--
+-- The Address Map Table
+--
+
+natAddrMapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NatAddrMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table lists address map parameters for NAT."
+    ::= { natMIBObjects 4 }
+
+natAddrMapEntry OBJECT-TYPE
+    SYNTAX      NatAddrMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This entry represents an address map to be used for
+             NAT and contributes to the dynamic and/or static
+             address mapping tables of the NAT device."
+    INDEX   { ifIndex, natAddrMapIndex }
+    ::= { natAddrMapTable 1 }
+
+NatAddrMapEntry ::= SEQUENCE {
+    natAddrMapIndex                 NatAddrMapId,
+    natAddrMapName                  SnmpAdminString,
+    natAddrMapEntryType             NatAssociationType,
+    natAddrMapTranslationEntity     NatTranslationEntity,
+    natAddrMapLocalAddrType         InetAddressType,
+    natAddrMapLocalAddrFrom         InetAddress,
+    natAddrMapLocalAddrTo           InetAddress,
+    natAddrMapLocalPortFrom         InetPortNumber,
+    natAddrMapLocalPortTo           InetPortNumber,
+    natAddrMapGlobalAddrType        InetAddressType,
+    natAddrMapGlobalAddrFrom        InetAddress,
+    natAddrMapGlobalAddrTo          InetAddress,
+    natAddrMapGlobalPortFrom        InetPortNumber,
+    natAddrMapGlobalPortTo          InetPortNumber,
+    natAddrMapProtocol              NatProtocolMap,
+    natAddrMapInTranslates          Counter64,
+    natAddrMapOutTranslates         Counter64,
+    natAddrMapDiscards              Counter64,
+    natAddrMapAddrUsed              Gauge32,
+    natAddrMapStorageType           StorageType,
+    natAddrMapRowStatus             RowStatus
+}
+
+natAddrMapIndex  OBJECT-TYPE
+    SYNTAX      NatAddrMapId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Along with ifIndex, this object uniquely
+             identifies an entry in the natAddrMapTable.
+             Address map entries are applied in the order
+             specified by natAddrMapIndex."
+    ::= { natAddrMapEntry 1 }
+
+natAddrMapName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "Name identifying all map entries in the table associated
+             with the same interface.  All map entries with the same
+             ifIndex MUST have the same map name."
+    ::= { natAddrMapEntry 2 }
+
+natAddrMapEntryType OBJECT-TYPE
+    SYNTAX      NatAssociationType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This parameter can be used to set up static
+             or dynamic address maps."
+    ::= { natAddrMapEntry 3 }
+
+natAddrMapTranslationEntity OBJECT-TYPE
+    SYNTAX      NatTranslationEntity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The end-point entity (source or destination) in
+             inbound or outbound sessions (i.e., first packets) that
+             may be translated by an address map entry.
+
+             Session direction (inbound or outbound) is
+             derived from the direction of the first packet
+             of a session traversing a NAT interface.
+             NAT address (and Transport-ID) maps may be defined
+
+             to effect inbound or outbound sessions.
+
+             Traditionally, address maps for Basic NAT and NAPT are
+             configured on a public interface for outbound sessions,
+             effecting translation of source end-point.  The value of
+             this object must be set to outboundSrcEndPoint for
+             those interfaces.
+
+             Alternately, if address maps for Basic NAT and NAPT were
+             to be configured on a private interface, the desired
+             value for this object for the map entries
+             would be inboundSrcEndPoint (i.e., effecting translation
+             of source end-point for inbound sessions).
+
+             If TwiceNAT were to be configured on a private interface,
+             the desired value for this object for the map entries
+             would be a bitmask of inboundSrcEndPoint and
+             inboundDstEndPoint."
+    ::= { natAddrMapEntry 4 }
+
+natAddrMapLocalAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo."
+    ::= { natAddrMapEntry 5 }
+
+natAddrMapLocalAddrFrom OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the first IP address of the range
+             of IP addresses mapped by this translation entry.  The
+             value of this object must be less than or equal to the
+             value of the natAddrMapLocalAddrTo object.
+
+             The type of this address is determined by the value of
+             the natAddrMapLocalAddrType object."
+    ::= { natAddrMapEntry 6 }
+
+natAddrMapLocalAddrTo OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the last IP address of the range of
+             IP addresses mapped by this translation entry.  If only
+             a single address is being mapped, the value of this object
+             is equal to the value of natAddrMapLocalAddrFrom.  For a
+             static NAT, the number of addresses in the range defined
+             by natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo must
+             be equal to the number of addresses in the range defined by
+             natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo.
+             The value of this object must be greater than or equal to
+             the value of the natAddrMapLocalAddrFrom object.
+
+             The type of this address is determined by the value of
+             the natAddrMapLocalAddrType object."
+    ::= { natAddrMapEntry 7 }
+
+natAddrMapLocalPortFrom OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "If this conceptual row describes a Basic NAT address
+             mapping, then the value of this object must be zero.  If
+             this conceptual row describes NAPT, then the value of
+             this object specifies the first port number in the range
+             of ports being mapped.
+
+             The value of this object must be less than or equal to the
+             value of the natAddrMapLocalPortTo object.  If the
+             translation specifies a single port, then the value of this
+             object is equal to the value of natAddrMapLocalPortTo."
+    DEFVAL { 0 }
+    ::= { natAddrMapEntry 8 }
+
+natAddrMapLocalPortTo OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "If this conceptual row describes a Basic NAT address
+             mapping, then the value of this object must be zero.  If
+             this conceptual row describes NAPT, then the value of
+             this object specifies the last port number in the range
+             of ports being mapped.
+
+             The value of this object must be greater than or equal to
+             the value of the natAddrMapLocalPortFrom object.  If the
+             translation specifies a single port, then the value of this
+             object is equal to the value of natAddrMapLocalPortFrom."
+    DEFVAL { 0 }
+    ::= { natAddrMapEntry 9 }
+
+natAddrMapGlobalAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo."
+    ::= { natAddrMapEntry 10 }
+
+natAddrMapGlobalAddrFrom OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the first IP address of the range of
+             IP addresses being mapped to.  The value of this object
+             must be less than or equal to the value of the
+             natAddrMapGlobalAddrTo object.
+
+             The type of this address is determined by the value of
+             the natAddrMapGlobalAddrType object."
+    ::= { natAddrMapEntry 11 }
+
+natAddrMapGlobalAddrTo OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the last IP address of the range of
+             IP addresses being mapped to.  If only a single address is
+             being mapped to, the value of this object is equal to the
+             value of natAddrMapGlobalAddrFrom.  For a static NAT, the
+             number of addresses in the range defined by
+             natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be
+             equal to the number of addresses in the range defined by
+             natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo.
+             The value of this object must be greater than or equal to
+             the value of the natAddrMapGlobalAddrFrom object.
+
+             The type of this address is determined by the value of
+             the natAddrMapGlobalAddrType object."
+    ::= { natAddrMapEntry 12 }
+
+natAddrMapGlobalPortFrom OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "If this conceptual row describes a Basic NAT address
+             mapping, then the value of this object must be zero.  If
+             this conceptual row describes NAPT, then the value of
+             this object specifies the first port number in the range
+             of ports being mapped to.
+
+             The value of this object must be less than or equal to the
+             value of the natAddrMapGlobalPortTo object.  If the
+             translation specifies a single port, then the value of this
+             object is equal to the value natAddrMapGlobalPortTo."
+    DEFVAL { 0 }
+    ::= { natAddrMapEntry 13 }
+
+natAddrMapGlobalPortTo OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "If this conceptual row describes a Basic NAT address
+             mapping, then the value of this object must be zero.  If
+             this conceptual row describes NAPT, then the value of this
+             object specifies the last port number in the range of
+             ports being mapped to.
+
+             The value of this object must be greater than or equal to
+             the value of the natAddrMapGlobalPortFrom object.  If the
+             translation specifies a single port, then the value of this
+             object is equal to the value of natAddrMapGlobalPortFrom."
+    DEFVAL { 0 }
+    ::= { natAddrMapEntry 14 }
+
+natAddrMapProtocol OBJECT-TYPE
+    SYNTAX      NatProtocolMap
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object specifies a bitmap of protocol identifiers."
+    ::= { natAddrMapEntry 15 }
+
+natAddrMapInTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of inbound packets pertaining to this address
+             map entry that were translated.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrMapEntry 16 }
+
+natAddrMapOutTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of outbound packets pertaining to this
+             address map entry that were translated.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrMapEntry 17 }
+
+natAddrMapDiscards OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets pertaining to this address map
+             entry that were dropped due to lack of addresses in the
+             address pool identified by this address map.  The value of
+             this object must always be zero in case of static
+             address map.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrMapEntry 18 }
+
+natAddrMapAddrUsed OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of addresses pertaining to this address map
+             that are currently being used from the NAT pool.
+             The value of this object must always be zero in the case
+
+             of a static address map."
+    ::= { natAddrMapEntry 19 }
+
+natAddrMapStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The storage type for this conceptual row.
+             Conceptual rows having the value 'permanent'
+             need not allow write-access to any columnar objects
+             in the row."
+    REFERENCE
+            "Textual Conventions for SMIv2, Section 2."
+    DEFVAL { nonVolatile }
+    ::= { natAddrMapEntry 20 }
+
+natAddrMapRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this conceptual row.
+
+             Until instances of all corresponding columns are
+             appropriately configured, the value of the
+             corresponding instance of the natAddrMapRowStatus
+             column is 'notReady'.
+
+             None of the objects in this row may be modified
+             while the value of this object is active(1)."
+    REFERENCE
+            "Textual Conventions for SMIv2, Section 2."
+    ::= { natAddrMapEntry 21 }
+
+--
+-- Address Bind section
+--
+
+natAddrBindNumberOfEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object maintains a count of the number of entries
+             that currently exist in the natAddrBindTable."
+    ::= { natMIBObjects 5 }
+
+--
+-- The NAT Address BIND Table
+--
+
+natAddrBindTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NatAddrBindEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table holds information about the currently
+             active NAT BINDs."
+    ::= { natMIBObjects 6 }
+
+natAddrBindEntry OBJECT-TYPE
+    SYNTAX     NatAddrBindEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Each entry in this table holds information about
+             an active address BIND.  These entries are lost
+             upon agent restart.
+
+             This row has indexing which may create variables with
+             more than 128 subidentifiers.  Implementers of this table
+             must be careful not to create entries that would result
+             in OIDs which exceed the 128 subidentifier limit.
+             Otherwise, the information cannot be accessed using
+             SNMPv1, SNMPv2c or SNMPv3."
+    INDEX   { ifIndex, natAddrBindLocalAddrType, natAddrBindLocalAddr }
+    ::= { natAddrBindTable 1 }
+
+NatAddrBindEntry ::= SEQUENCE {
+    natAddrBindLocalAddrType        InetAddressType,
+    natAddrBindLocalAddr            InetAddress,
+    natAddrBindGlobalAddrType       InetAddressType,
+    natAddrBindGlobalAddr           InetAddress,
+    natAddrBindId                   NatBindId,
+    natAddrBindTranslationEntity    NatTranslationEntity,
+    natAddrBindType                 NatAssociationType,
+    natAddrBindMapIndex             NatAddrMapId,
+    natAddrBindSessions             Gauge32,
+    natAddrBindMaxIdleTime          TimeTicks,
+    natAddrBindCurrentIdleTime      TimeTicks,
+    natAddrBindInTranslates         Counter64,
+    natAddrBindOutTranslates        Counter64
+}
+
+natAddrBindLocalAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natAddrBindLocalAddr."
+    ::= { natAddrBindEntry 1 }
+
+natAddrBindLocalAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This object represents the private-realm specific network
+             layer address, which maps to the public-realm address
+             represented by natAddrBindGlobalAddr.
+
+             The type of this address is determined by the value of
+             the natAddrBindLocalAddrType object."
+   ::= { natAddrBindEntry 2 }
+
+natAddrBindGlobalAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natAddrBindGlobalAddr."
+    ::= { natAddrBindEntry 3 }
+
+natAddrBindGlobalAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object represents the public-realm network layer
+             address that maps to the private-realm network layer
+             address represented by natAddrBindLocalAddr.
+
+             The type of this address is determined by the value of
+             the natAddrBindGlobalAddrType object."
+    ::= { natAddrBindEntry 4 }
+
+natAddrBindId OBJECT-TYPE
+    SYNTAX     NatBindId
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object represents a bind id that is dynamically
+             assigned to each bind by a NAT enabled device.  Each
+             bind is represented by a bind id that is
+             unique across both, the natAddrBindTable and the
+             natAddrPortBindTable."
+    ::= { natAddrBindEntry 5 }
+
+natAddrBindTranslationEntity OBJECT-TYPE
+    SYNTAX     NatTranslationEntity
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object represents the direction of sessions
+             for which this bind is applicable and the endpoint entity
+             (source or destination) within the sessions that is
+             subject to translation using the BIND.
+
+             Orientation of the bind can be a superset of
+             translationEntity of the address map entry which
+             forms the basis for this bind.
+
+             For example, if the translationEntity of an
+             address map entry is outboundSrcEndPoint, the
+             translationEntity of a bind derived from this
+             map entry may either be outboundSrcEndPoint or
+             it may be bidirectional (a bitmask of
+             outboundSrcEndPoint and inboundDstEndPoint)."
+    ::= { natAddrBindEntry 6 }
+
+natAddrBindType OBJECT-TYPE
+    SYNTAX     NatAssociationType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates whether the bind is static or
+             dynamic."
+    ::= { natAddrBindEntry 7 }
+
+natAddrBindMapIndex OBJECT-TYPE
+    SYNTAX     NatAddrMapId
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object is a pointer to the natAddrMapTable entry
+             (and the parameters of that entry) which was used in
+             creating this BIND.  This object, in conjunction with the
+             ifIndex (which identifies a unique addrMapName) points to
+
+             a unique entry in the natAddrMapTable."
+    ::= { natAddrBindEntry 8 }
+
+natAddrBindSessions OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Number of sessions currently using this BIND."
+    ::= { natAddrBindEntry 9 }
+
+natAddrBindMaxIdleTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates the maximum time for
+             which this bind can be idle with no sessions
+             attached to it.
+
+             The value of this object is of relevance only for
+             dynamic NAT."
+    ::= { natAddrBindEntry 10 }
+
+natAddrBindCurrentIdleTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "At any given instance, this object indicates the
+             time that this bind has been idle without any sessions
+             attached to it.
+
+             The value of this object is of relevance only for
+             dynamic NAT."
+    ::= { natAddrBindEntry 11 }
+
+natAddrBindInTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of inbound packets that were successfully
+             translated by using this bind entry.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrBindEntry 12 }
+
+natAddrBindOutTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of outbound packets that were successfully
+             translated using this bind entry.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrBindEntry 13 }
+
+--
+-- Address Port Bind section
+--
+
+natAddrPortBindNumberOfEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object maintains a count of the number of entries
+             that currently exist in the natAddrPortBindTable."
+    ::= { natMIBObjects 7 }
+
+--
+-- The NAT Address Port Bind Table
+--
+
+natAddrPortBindTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NatAddrPortBindEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table holds information about the currently
+             active NAPT BINDs."
+    ::= { natMIBObjects 8 }
+
+natAddrPortBindEntry OBJECT-TYPE
+    SYNTAX     NatAddrPortBindEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "Each entry in the this table holds information
+             about a NAPT bind that is currently active.
+             These entries are lost upon agent restart.
+
+             This row has indexing which may create variables with
+             more than 128 subidentifiers.  Implementers of this table
+             must be careful not to create entries which would result
+             in OIDs that exceed the 128 subidentifier limit.
+             Otherwise, the information cannot be accessed using
+             SNMPv1, SNMPv2c or SNMPv3."
+    INDEX   { ifIndex, natAddrPortBindLocalAddrType,
+              natAddrPortBindLocalAddr, natAddrPortBindLocalPort,
+              natAddrPortBindProtocol }
+    ::= { natAddrPortBindTable 1 }
+
+NatAddrPortBindEntry ::= SEQUENCE {
+    natAddrPortBindLocalAddrType        InetAddressType,
+    natAddrPortBindLocalAddr            InetAddress,
+    natAddrPortBindLocalPort            InetPortNumber,
+    natAddrPortBindProtocol             NatProtocolType,
+    natAddrPortBindGlobalAddrType       InetAddressType,
+    natAddrPortBindGlobalAddr           InetAddress,
+    natAddrPortBindGlobalPort           InetPortNumber,
+    natAddrPortBindId                   NatBindId,
+    natAddrPortBindTranslationEntity    NatTranslationEntity,
+    natAddrPortBindType                 NatAssociationType,
+    natAddrPortBindMapIndex             NatAddrMapId,
+    natAddrPortBindSessions             Gauge32,
+    natAddrPortBindMaxIdleTime          TimeTicks,
+    natAddrPortBindCurrentIdleTime      TimeTicks,
+    natAddrPortBindInTranslates         Counter64,
+    natAddrPortBindOutTranslates        Counter64
+}
+
+natAddrPortBindLocalAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natAddrPortBindLocalAddr."
+    ::= { natAddrPortBindEntry 1 }
+
+natAddrPortBindLocalAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This object represents the private-realm specific network
+             layer address which, in conjunction with
+             natAddrPortBindLocalPort, maps to the public-realm
+             network layer address and transport id represented by
+             natAddrPortBindGlobalAddr and natAddrPortBindGlobalPort
+             respectively.
+
+             The type of this address is determined by the value of
+             the natAddrPortBindLocalAddrType object."
+    ::= { natAddrPortBindEntry 2 }
+
+natAddrPortBindLocalPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "For a protocol value TCP or UDP, this object represents
+             the private-realm specific port number.  On the other
+             hand, for ICMP a bind is created only for query/response
+             type ICMP messages such as ICMP echo, Timestamp, and
+             Information request messages, and this object represents
+             the private-realm specific identifier in the ICMP
+             message, as defined in RFC 792 for ICMPv4 and in RFC
+             2463 for ICMPv6.
+
+             This object, together with natAddrPortBindProtocol,
+             natAddrPortBindLocalAddrType, and natAddrPortBindLocalAddr,
+             constitutes a session endpoint in the private realm.  A
+             bind entry binds a private realm specific endpoint to a
+             public realm specific endpoint, as represented by the
+             tuple of (natAddrPortBindGlobalPort,
+             natAddrPortBindProtocol, natAddrPortBindGlobalAddrType,
+             and natAddrPortBindGlobalAddr)."
+   ::= { natAddrPortBindEntry 3 }
+
+natAddrPortBindProtocol OBJECT-TYPE
+    SYNTAX      NatProtocolType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This object specifies a protocol identifier.  If the
+             value of this object is none(1), then this bind entry
+             applies to all IP traffic.  Any other value of this object
+             specifies the class of IP traffic to which this BIND
+             applies."
+    ::= { natAddrPortBindEntry 4 }
+
+natAddrPortBindGlobalAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natAddrPortBindGlobalAddr."
+    ::= { natAddrPortBindEntry 5 }
+
+natAddrPortBindGlobalAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object represents the public-realm specific network
+             layer address that, in conjunction with
+             natAddrPortBindGlobalPort, maps to the private-realm
+
+             network layer address and transport id represented by
+             natAddrPortBindLocalAddr and natAddrPortBindLocalPort,
+             respectively.
+
+             The type of this address is determined by the value of
+             the natAddrPortBindGlobalAddrType object."
+    ::= { natAddrPortBindEntry 6 }
+
+natAddrPortBindGlobalPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "For a protocol value TCP or UDP, this object represents
+             the public-realm specific port number.  On the other
+             hand, for ICMP a bind is created only for query/response
+             type ICMP messages such as ICMP echo, Timestamp, and
+             Information request messages, and this object represents
+             the public-realm specific identifier in the ICMP message,
+             as defined in RFC 792 for ICMPv4 and in RFC 2463 for
+             ICMPv6.
+
+             This object, together with natAddrPortBindProtocol,
+             natAddrPortBindGlobalAddrType, and
+             natAddrPortBindGlobalAddr, constitutes a session endpoint
+             in the public realm.  A bind entry binds a public realm
+             specific endpoint to a private realm specific endpoint,
+             as represented by the tuple of
+              (natAddrPortBindLocalPort, natAddrPortBindProtocol,
+               natAddrPortBindLocalAddrType, and
+
+               natAddrPortBindLocalAddr)."
+    ::= { natAddrPortBindEntry 7 }
+
+natAddrPortBindId OBJECT-TYPE
+    SYNTAX     NatBindId
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object represents a bind id that is dynamically
+             assigned to each bind by a NAT enabled device.  Each
+             bind is represented by a unique bind id across both
+             the natAddrBindTable and the natAddrPortBindTable."
+    ::= { natAddrPortBindEntry 8 }
+
+natAddrPortBindTranslationEntity OBJECT-TYPE
+    SYNTAX     NatTranslationEntity
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object represents the direction of sessions
+             for which this bind is applicable and the entity
+             (source or destination) within the sessions that is
+             subject to translation with the BIND.
+
+             Orientation of the bind can be a superset of the
+             translationEntity of the address map entry that
+             forms the basis for this bind.
+
+             For example, if the translationEntity of an
+             address map entry is outboundSrcEndPoint, the
+             translationEntity of a bind derived from this
+             map entry may either be outboundSrcEndPoint or
+             may be bidirectional (a bitmask of
+             outboundSrcEndPoint and inboundDstEndPoint)."
+    ::= { natAddrPortBindEntry 9 }
+
+natAddrPortBindType OBJECT-TYPE
+    SYNTAX     NatAssociationType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates whether the bind is static or
+             dynamic."
+    ::= { natAddrPortBindEntry 10 }
+
+natAddrPortBindMapIndex OBJECT-TYPE
+    SYNTAX     NatAddrMapId
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object is a pointer to the natAddrMapTable entry
+             (and the parameters of that entry) used in
+             creating this BIND.  This object, in conjunction with the
+             ifIndex (which identifies a unique addrMapName), points
+             to a unique entry in the natAddrMapTable."
+    ::= { natAddrPortBindEntry 11 }
+
+natAddrPortBindSessions OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Number of sessions currently using this BIND."
+    ::= { natAddrPortBindEntry 12 }
+
+natAddrPortBindMaxIdleTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates the maximum time for
+             which this bind can be idle without any sessions
+             attached to it.
+             The value of this object is of relevance
+             only for dynamic NAT."
+    ::= { natAddrPortBindEntry 13 }
+
+natAddrPortBindCurrentIdleTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "At any given instance, this object indicates the
+             time that this bind has been idle without any sessions
+             attached to it.
+
+             The value of this object is of relevance
+             only for dynamic NAT."
+    ::= { natAddrPortBindEntry 14 }
+
+natAddrPortBindInTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of inbound packets that were translated as per
+             this bind entry.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrPortBindEntry 15 }
+
+natAddrPortBindOutTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of outbound packets that were translated as per
+             this bind entry.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natAddrPortBindEntry 16 }
+
+--
+-- The Session Table
+--
+
+natSessionTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NatSessionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing one entry for each
+             NAT session currently active on this NAT device."
+    ::= { natMIBObjects 9 }
+
+natSessionEntry OBJECT-TYPE
+    SYNTAX     NatSessionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing information
+             about an active NAT session on this NAT device.
+             These entries are lost upon agent restart."
+    INDEX   { ifIndex, natSessionIndex }
+    ::= { natSessionTable 1 }
+
+NatSessionEntry ::= SEQUENCE {
+
+    natSessionIndex                        NatSessionId,
+    natSessionPrivateSrcEPBindId           NatBindIdOrZero,
+    natSessionPrivateSrcEPBindMode         NatBindMode,
+    natSessionPrivateDstEPBindId           NatBindIdOrZero,
+    natSessionPrivateDstEPBindMode         NatBindMode,
+    natSessionDirection                    INTEGER,
+    natSessionUpTime                       TimeTicks,
+    natSessionAddrMapIndex                 NatAddrMapId,
+    natSessionProtocolType                 NatProtocolType,
+    natSessionPrivateAddrType              InetAddressType,
+    natSessionPrivateSrcAddr               InetAddress,
+    natSessionPrivateSrcPort               InetPortNumber,
+    natSessionPrivateDstAddr               InetAddress,
+    natSessionPrivateDstPort               InetPortNumber,
+    natSessionPublicAddrType               InetAddressType,
+    natSessionPublicSrcAddr                InetAddress,
+    natSessionPublicSrcPort                InetPortNumber,
+    natSessionPublicDstAddr                InetAddress,
+    natSessionPublicDstPort                InetPortNumber,
+    natSessionMaxIdleTime                  TimeTicks,
+    natSessionCurrentIdleTime              TimeTicks,
+    natSessionInTranslates                 Counter64,
+    natSessionOutTranslates                Counter64
+}
+
+natSessionIndex OBJECT-TYPE
+    SYNTAX     NatSessionId
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The session ID for this NAT session."
+    ::= { natSessionEntry 1 }
+
+natSessionPrivateSrcEPBindId OBJECT-TYPE
+    SYNTAX     NatBindIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The bind id associated between private and public
+             source end points.  In the case of Symmetric-NAT,
+             this should be set to zero."
+    ::= { natSessionEntry 2 }
+
+natSessionPrivateSrcEPBindMode OBJECT-TYPE
+    SYNTAX     NatBindMode
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates whether the bind indicated
+             by the object natSessionPrivateSrcEPBindId
+             is an address bind or an address port bind."
+    ::= { natSessionEntry 3 }
+
+natSessionPrivateDstEPBindId OBJECT-TYPE
+    SYNTAX     NatBindIdOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The bind id associated between private and public
+             destination end points."
+    ::= { natSessionEntry 4 }
+
+natSessionPrivateDstEPBindMode OBJECT-TYPE
+    SYNTAX     NatBindMode
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates whether the bind indicated
+             by the object natSessionPrivateDstEPBindId
+             is an address bind or an address port bind."
+    ::= { natSessionEntry 5 }
+
+natSessionDirection OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   inbound (1),
+                   outbound (2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The direction of this session with respect to the
+             local network.  'inbound' indicates that this session
+             was initiated from the public network into the private
+             network.  'outbound' indicates that this session was
+             initiated from the private network into the public
+             network."
+    ::= { natSessionEntry 6 }
+
+natSessionUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The up time of this session in one-hundredths of a
+             second."
+    ::= { natSessionEntry 7 }
+
+natSessionAddrMapIndex OBJECT-TYPE
+    SYNTAX     NatAddrMapId
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object is a pointer to the natAddrMapTable entry
+             (and the parameters of that entry) used in
+             creating this session.  This object, in conjunction with
+             the ifIndex (which identifies a unique addrMapName), points
+             to a unique entry in the natAddrMapTable."
+    ::= { natSessionEntry 8 }
+
+natSessionProtocolType OBJECT-TYPE
+    SYNTAX     NatProtocolType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The protocol type of this session."
+    ::= { natSessionEntry 9 }
+
+natSessionPrivateAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natSessionPrivateSrcAddr and natSessionPrivateDstAddr."
+    ::= { natSessionEntry 10 }
+
+natSessionPrivateSrcAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The source IP address of the session endpoint that
+             lies in the private network.
+
+             The value of this object must be zero only when the
+             natSessionPrivateSrcEPBindId object has a zero value.
+             When the value of this object is zero, the NAT session
+             lookup will match any IP address to this field.
+
+             The type of this address is determined by the value of
+             the natSessionPrivateAddrType object."
+    ::= { natSessionEntry 11 }
+
+natSessionPrivateSrcPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "When the value of protocol is TCP or UDP, this object
+             represents the source port in the first packet of session
+             while in private-realm.  On the other hand, when the
+             protocol is ICMP, a NAT session is created only for
+             query/response type ICMP messages such as ICMP echo,
+             Timestamp, and Information request messages, and this
+             object represents the private-realm specific identifier
+             in the ICMP message, as defined in RFC 792 for ICMPv4
+             and in RFC 2463 for ICMPv6.
+
+             The value of this object must be zero when the
+             natSessionPrivateSrcEPBindId object has zero value
+             and value of natSessionPrivateSrcEPBindMode is
+             addressPortBind(2).  In such a case, the NAT session
+             lookup will match any port number to this field.
+
+             The value of this object must be zero when the object
+             is not a representative field (SrcPort, DstPort, or
+             ICMP identifier) of the session tuple in either the
+             public realm or the private realm."
+    ::= { natSessionEntry 12 }
+
+natSessionPrivateDstAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The destination IP address of the session endpoint that
+             lies in the private network.
+
+             The value of this object must be zero when the
+             natSessionPrivateDstEPBindId object has a zero value.
+             In such a scenario, the NAT session lookup will match
+             any IP address to this field.
+
+             The type of this address is determined by the value of
+             the natSessionPrivateAddrType object."
+    ::= { natSessionEntry 13 }
+
+natSessionPrivateDstPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "When the value of protocol is TCP or UDP, this object
+             represents the destination port in the first packet
+             of session while in private-realm.  On the other hand,
+             when the protocol is ICMP, this object is not relevant
+             and should be set to zero.
+
+             The value of this object must be zero when the
+             natSessionPrivateDstEPBindId object has a zero
+             value and natSessionPrivateDstEPBindMode is set to
+             addressPortBind(2).  In such a case, the NAT session
+             lookup will match any port number to this field.
+
+             The value of this object must be zero when the object
+             is not a representative field (SrcPort, DstPort, or
+             ICMP identifier) of the session tuple in either the
+             public realm or the private realm."
+    ::= { natSessionEntry 14 }
+
+natSessionPublicAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the address type used for
+             natSessionPublicSrcAddr and natSessionPublicDstAddr."
+    ::= { natSessionEntry 15 }
+
+natSessionPublicSrcAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The source IP address of the session endpoint that
+             lies in the public network.
+
+             The value of this object must be zero when the
+             natSessionPrivateSrcEPBindId object has a zero value.
+             In such a scenario, the NAT session lookup will match
+             any IP address to this field.
+
+             The type of this address is determined by the value of
+             the natSessionPublicAddrType object."
+    ::= { natSessionEntry 16 }
+
+natSessionPublicSrcPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "When the value of protocol is TCP or UDP, this object
+             represents the source port in the first packet of
+             session while in public-realm.  On the other hand, when
+             protocol is ICMP, a NAT session is created only for
+             query/response type ICMP messages such as ICMP echo,
+             Timestamp, and Information request messages, and this
+             object represents the public-realm specific identifier
+             in the ICMP message, as defined in RFC 792 for ICMPv4
+             and in RFC 2463 for ICMPv6.
+
+             The value of this object must be zero when the
+             natSessionPrivateSrcEPBindId object has a zero value
+             and natSessionPrivateSrcEPBindMode is set to
+             addressPortBind(2).  In such a scenario, the NAT
+             session lookup will match any port number to this
+             field.
+
+             The value of this object must be zero when the object
+             is not a representative field (SrcPort, DstPort or
+             ICMP identifier) of the session tuple in either the
+             public realm or the private realm."
+    ::= { natSessionEntry 17 }
+
+natSessionPublicDstAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The destination IP address of the session endpoint that
+             lies in the public network.
+
+             The value of this object must be non-zero when the
+             natSessionPrivateDstEPBindId object has a non-zero
+             value.  If the value of this object and the
+             corresponding natSessionPrivateDstEPBindId object value
+             is zero, then the NAT session lookup will match any IP
+             address to this field.
+
+             The type of this address is determined by the value of
+             the natSessionPublicAddrType object."
+    ::= { natSessionEntry 18 }
+
+natSessionPublicDstPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "When the value of protocol is TCP or UDP, this object
+             represents the destination port in the first packet of
+             session while in public-realm.  On the other hand, when
+             the protocol is ICMP, this object is not relevant for
+             translation and should be zero.
+
+             The value of this object must be zero when the
+             natSessionPrivateDstEPBindId object has a zero value
+             and natSessionPrivateDstEPBindMode is
+             addressPortBind(2).  In such a scenario, the NAT
+             session lookup will match any port number to this
+             field.
+
+             The value of this object must be zero when the object
+             is not a representative field (SrcPort, DstPort, or
+             ICMP identifier) of the session tuple in either the
+             public realm or the private realm."
+    ::= { natSessionEntry 19 }
+
+natSessionMaxIdleTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The max time for which this session can be idle
+             without detecting a packet."
+    ::= { natSessionEntry 20 }
+
+natSessionCurrentIdleTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since a packet belonging to this session was
+            last detected."
+    ::= { natSessionEntry 21 }
+
+natSessionInTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of inbound packets that were translated for
+             this session.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natSessionEntry 22 }
+
+natSessionOutTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of outbound packets that were translated for
+             this session.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natSessionEntry 23 }
+
+--
+-- The Protocol table
+--
+
+natProtocolTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NatProtocolEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing per protocol NAT
+             statistics."
+    ::= { natMIBObjects 10 }
+
+natProtocolEntry OBJECT-TYPE
+    SYNTAX     NatProtocolEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing NAT statistics
+             pertaining to a particular protocol."
+    INDEX   { natProtocol }
+    ::= { natProtocolTable 1 }
+
+NatProtocolEntry ::= SEQUENCE {
+    natProtocol                 NatProtocolType,
+    natProtocolInTranslates     Counter64,
+    natProtocolOutTranslates    Counter64,
+    natProtocolDiscards         Counter64
+}
+
+natProtocol    OBJECT-TYPE
+    SYNTAX     NatProtocolType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This object represents the protocol pertaining to which
+             parameters are reported."
+    ::= { natProtocolEntry 1 }
+
+natProtocolInTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of inbound packets pertaining to the protocol
+             identified by natProtocol that underwent NAT.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natProtocolEntry 2 }
+
+natProtocolOutTranslates OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of outbound packets pertaining to the protocol
+             identified by natProtocol that underwent NAT.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+    ::= { natProtocolEntry 3 }
+
+natProtocolDiscards OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of packets pertaining to the protocol
+             identified by natProtocol that had to be
+             rejected/dropped due to lack of resources.  These
+             rejections could be due to session timeout, resource
+             unavailability, lack of address space, etc.
+
+             Discontinuities in the value of this counter can occur at
+             reinitialization of the management system and at other
+             times, as indicated by the value of
+             ifCounterDiscontinuityTime on the relevant interface."
+     ::= { natProtocolEntry 4 }
+
+--
+-- Notifications section
+--
+
+natMIBNotifications OBJECT IDENTIFIER ::= { natMIB 0 }
+
+--
+-- Notifications
+--
+
+natPacketDiscard NOTIFICATION-TYPE
+    OBJECTS { ifIndex }
+    STATUS  current
+    DESCRIPTION
+            "This notification is generated when IP packets are
+             discarded by the NAT function; e.g., due to lack of
+             mapping space when NAT is out of addresses or ports.
+
+             Note that the generation of natPacketDiscard
+             notifications is throttled by the agent, as specified
+             by the 'natNotifThrottlingInterval' object."
+    ::= { natMIBNotifications 1 }
+
+--
+-- Conformance information.
+--
+
+natMIBConformance OBJECT IDENTIFIER ::= { natMIB 2 }
+
+natMIBGroups      OBJECT IDENTIFIER ::= { natMIBConformance 1 }
+natMIBCompliances OBJECT IDENTIFIER ::= { natMIBConformance 2 }
+
+--
+-- Units of conformance
+--
+
+natConfigGroup OBJECT-GROUP
+    OBJECTS { natInterfaceRealm,
+              natInterfaceServiceType,
+              natInterfaceStorageType,
+              natInterfaceRowStatus,
+              natAddrMapName,
+              natAddrMapEntryType,
+              natAddrMapTranslationEntity,
+              natAddrMapLocalAddrType,
+              natAddrMapLocalAddrFrom,
+              natAddrMapLocalAddrTo,
+              natAddrMapLocalPortFrom,
+              natAddrMapLocalPortTo,
+              natAddrMapGlobalAddrType,
+              natAddrMapGlobalAddrFrom,
+              natAddrMapGlobalAddrTo,
+              natAddrMapGlobalPortFrom,
+              natAddrMapGlobalPortTo,
+              natAddrMapProtocol,
+              natAddrMapStorageType,
+              natAddrMapRowStatus,
+              natBindDefIdleTimeout,
+              natUdpDefIdleTimeout,
+              natIcmpDefIdleTimeout,
+              natOtherDefIdleTimeout,
+              natTcpDefIdleTimeout,
+              natTcpDefNegTimeout,
+              natNotifThrottlingInterval }
+    STATUS  current
+    DESCRIPTION
+            "A collection of configuration-related information
+             required to support management of devices supporting
+             NAT."
+    ::= { natMIBGroups 1 }
+
+natTranslationGroup OBJECT-GROUP
+    OBJECTS { natAddrBindNumberOfEntries,
+              natAddrBindGlobalAddrType,
+              natAddrBindGlobalAddr,
+              natAddrBindId,
+              natAddrBindTranslationEntity,
+              natAddrBindType,
+              natAddrBindMapIndex,
+              natAddrBindSessions,
+              natAddrBindMaxIdleTime,
+              natAddrBindCurrentIdleTime,
+              natAddrBindInTranslates,
+              natAddrBindOutTranslates,
+              natAddrPortBindNumberOfEntries,
+              natAddrPortBindGlobalAddrType,
+              natAddrPortBindGlobalAddr,
+              natAddrPortBindGlobalPort,
+              natAddrPortBindId,
+              natAddrPortBindTranslationEntity,
+              natAddrPortBindType,
+              natAddrPortBindMapIndex,
+              natAddrPortBindSessions,
+              natAddrPortBindMaxIdleTime,
+              natAddrPortBindCurrentIdleTime,
+              natAddrPortBindInTranslates,
+              natAddrPortBindOutTranslates,
+              natSessionPrivateSrcEPBindId,
+              natSessionPrivateSrcEPBindMode,
+              natSessionPrivateDstEPBindId,
+              natSessionPrivateDstEPBindMode,
+              natSessionDirection,
+              natSessionUpTime,
+              natSessionAddrMapIndex,
+              natSessionProtocolType,
+              natSessionPrivateAddrType,
+              natSessionPrivateSrcAddr,
+              natSessionPrivateSrcPort,
+              natSessionPrivateDstAddr,
+              natSessionPrivateDstPort,
+              natSessionPublicAddrType,
+              natSessionPublicSrcAddr,
+              natSessionPublicSrcPort,
+              natSessionPublicDstAddr,
+              natSessionPublicDstPort,
+              natSessionMaxIdleTime,
+              natSessionCurrentIdleTime,
+              natSessionInTranslates,
+              natSessionOutTranslates }
+    STATUS  current
+    DESCRIPTION
+            "A collection of BIND-related objects required to support
+             management of devices supporting NAT."
+    ::= { natMIBGroups 2 }
+
+natStatsInterfaceGroup OBJECT-GROUP
+    OBJECTS { natInterfaceInTranslates,
+              natInterfaceOutTranslates,
+              natInterfaceDiscards }
+    STATUS  current
+    DESCRIPTION
+            "A collection of NAT statistics associated with the
+             interface on which NAT is configured, to aid
+             troubleshooting/monitoring of the NAT operation."
+    ::= { natMIBGroups 3 }
+
+natStatsProtocolGroup OBJECT-GROUP
+
+    OBJECTS { natProtocolInTranslates,
+              natProtocolOutTranslates,
+              natProtocolDiscards }
+    STATUS  current
+    DESCRIPTION
+            "A collection of protocol specific NAT statistics,
+             to aid troubleshooting/monitoring of NAT operation."
+    ::= { natMIBGroups 4 }
+
+natStatsAddrMapGroup OBJECT-GROUP
+    OBJECTS { natAddrMapInTranslates,
+              natAddrMapOutTranslates,
+              natAddrMapDiscards,
+              natAddrMapAddrUsed }
+    STATUS  current
+    DESCRIPTION
+            "A collection of address map specific NAT statistics,
+             to aid troubleshooting/monitoring of NAT operation."
+    ::= { natMIBGroups 5 }
+
+natMIBNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { natPacketDiscard }
+    STATUS        current
+    DESCRIPTION
+            "A collection of notifications generated by
+            devices supporting this MIB."
+    ::= { natMIBGroups 6 }
+
+--
+-- Compliance statements
+--
+
+natMIBFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "When this MIB is implemented with support for
+             read-create, then such an implementation can claim
+             full compliance.  Such devices can then be both
+             monitored and configured with this MIB.
+
+             The following index objects cannot be added as OBJECT
+             clauses but nevertheless have the compliance
+             requirements:
+                 "
+             -- OBJECT  natAddrBindLocalAddrType
+             -- SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+             -- DESCRIPTION
+             --         "An implementation is required to support
+
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+             -- OBJECT  natAddrBindLocalAddr
+             -- SYNTAX  InetAddress (SIZE(4|16))
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+             -- OBJECT  natAddrPortBindLocalAddrType
+             -- SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+             -- OBJECT  natAddrPortBindLocalAddr
+             -- SYNTAX  InetAddress (SIZE(4|16))
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+    MODULE IF-MIB -- The interfaces MIB, RFC2863
+      MANDATORY-GROUPS {
+        ifCounterDiscontinuityGroup
+      }
+
+    MODULE  -- this module
+      MANDATORY-GROUPS { natConfigGroup, natTranslationGroup,
+                         natStatsInterfaceGroup }
+
+      GROUP       natStatsProtocolGroup
+      DESCRIPTION
+               "This group is optional."
+      GROUP       natStatsAddrMapGroup
+      DESCRIPTION
+               "This group is optional."
+      GROUP       natMIBNotificationGroup
+      DESCRIPTION
+               "This group is optional."
+
+      OBJECT  natAddrMapLocalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrMapLocalAddrFrom
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrMapLocalAddrTo
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrMapGlobalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrMapGlobalAddrFrom
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrMapGlobalAddrTo
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrBindGlobalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrBindGlobalAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrPortBindGlobalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natAddrPortBindGlobalAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natSessionPrivateAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natSessionPrivateSrcAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natSessionPrivateDstAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natSessionPublicAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natSessionPublicSrcAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+
+      OBJECT  natSessionPublicDstAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support
+               for IPv4 and IPv6."
+    ::= { natMIBCompliances 1 }
+
+natMIBReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "When this MIB is implemented without support for
+             read-create (i.e., in read-only mode), then such an
+             implementation can claim read-only compliance.
+             Such a device can then be monitored but cannot be
+             configured with this MIB.
+
+             The following index objects cannot be added as OBJECT
+             clauses but nevertheless have the compliance
+             requirements:
+             "
+             -- OBJECT  natAddrBindLocalAddrType
+             -- SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+             -- OBJECT  natAddrBindLocalAddr
+             -- SYNTAX  InetAddress (SIZE(4|16))
+
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+             -- OBJECT  natAddrPortBindLocalAddrType
+             -- SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+             -- OBJECT  natAddrPortBindLocalAddr
+             -- SYNTAX  InetAddress (SIZE(4|16))
+             -- DESCRIPTION
+             --         "An implementation is required to support
+             --          global IPv4 and/or IPv6 addresses, depending
+             --          on its support for IPv4 and IPv6."
+
+    MODULE IF-MIB -- The interfaces MIB, RFC2863
+      MANDATORY-GROUPS {
+        ifCounterDiscontinuityGroup
+      }
+
+    MODULE  -- this module
+      MANDATORY-GROUPS { natConfigGroup, natTranslationGroup,
+                         natStatsInterfaceGroup }
+
+      GROUP       natStatsProtocolGroup
+      DESCRIPTION
+               "This group is optional."
+      GROUP       natStatsAddrMapGroup
+      DESCRIPTION
+               "This group is optional."
+      GROUP       natMIBNotificationGroup
+      DESCRIPTION
+               "This group is optional."
+      OBJECT natInterfaceRowStatus
+      SYNTAX RowStatus { active(1) }
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required, and active is the only
+               status that needs to be supported."
+
+      OBJECT  natAddrMapLocalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required.  An implementation is
+               required to support global IPv4 and/or IPv6 addresses,
+               depending on its support for IPv4 and IPv6."
+
+      OBJECT  natAddrMapLocalAddrFrom
+      SYNTAX  InetAddress (SIZE(4|16))
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required.  An implementation is
+               required to support global IPv4 and/or IPv6 addresses,
+               depending on its support for IPv4 and IPv6."
+
+      OBJECT  natAddrMapLocalAddrTo
+      SYNTAX  InetAddress (SIZE(4|16))
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required.  An implementation is
+               required to support global IPv4 and/or IPv6 addresses,
+               depending on its support for IPv4 and IPv6."
+
+      OBJECT  natAddrMapGlobalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required.  An implementation is
+               required to support global IPv4 and/or IPv6 addresses,
+               depending on its support for IPv4 and IPv6."
+
+      OBJECT  natAddrMapGlobalAddrFrom
+      SYNTAX  InetAddress (SIZE(4|16))
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required.  An implementation is
+               required to support global IPv4 and/or IPv6 addresses,
+               depending on its support for IPv4 and IPv6."
+
+      OBJECT  natAddrMapGlobalAddrTo
+      SYNTAX  InetAddress (SIZE(4|16))
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required.  An implementation is
+               required to support global IPv4 and/or IPv6 addresses,
+               depending on its support for IPv4 and IPv6."
+
+      OBJECT natAddrMapRowStatus
+      SYNTAX RowStatus { active(1) }
+      MIN-ACCESS   read-only
+      DESCRIPTION
+              "Write access is not required, and active is the only
+               status that needs to be supported."
+
+      OBJECT  natAddrBindGlobalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natAddrBindGlobalAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natAddrPortBindGlobalAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natAddrPortBindGlobalAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natSessionPrivateAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natSessionPrivateSrcAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natSessionPrivateDstAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natSessionPublicAddrType
+      SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natSessionPublicSrcAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+
+      OBJECT  natSessionPublicDstAddr
+      SYNTAX  InetAddress (SIZE(4|16))
+      DESCRIPTION
+              "An implementation is required to support global IPv4
+               and/or IPv6 addresses, depending on its support for
+               IPv4 and IPv6."
+    ::= { natMIBCompliances 2 }
+
+END
diff --git a/snmp_builder/mibs/NEMO-MIB.mib b/snmp_builder/mibs/NEMO-MIB.mib
new file mode 100644
index 0000000..248fb4a
--- /dev/null
+++ b/snmp_builder/mibs/NEMO-MIB.mib
@@ -0,0 +1,1739 @@
+ NEMO-MIB DEFINITIONS ::= BEGIN
+  IMPORTS
+    MODULE-IDENTITY,  mib-2, Unsigned32, Counter32,
+    Gauge32,
+    OBJECT-TYPE, NOTIFICATION-TYPE
+               FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION,
+    TruthValue, DateAndTime, TimeStamp
+               FROM SNMPv2-TC
+    SnmpAdminString
+               FROM SNMP-FRAMEWORK-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+               FROM SNMPv2-CONF
+    InetAddressType, InetAddress, InetAddressPrefixLength
+               FROM INET-ADDRESS-MIB
+    InterfaceIndex
+               FROM IF-MIB
+    mip6BindingHomeAddressType, mip6BindingHomeAddress,
+    mip6MnBLEntry, mip6BindingCacheEntry,
+    mip6MnBLCOAType, mip6MnBLCOA
+               FROM MOBILEIPV6-MIB
+    ;
+
+ nemoMIB MODULE-IDENTITY
+     LAST-UPDATED "200903100000Z"      -- 10 March 2009
+     ORGANIZATION "IETF MEXT Working Group"
+
+     CONTACT-INFO
+        "           Sri Gundavelli
+            Postal: Cisco
+                    170 W.Tasman Drive,
+                    San Jose, CA 95134
+                    USA
+               Tel: +1-408-527-6109
+             Email: sgundave@cisco.com
+
+                    Glenn Mansfield Keeni
+            Postal: Cyber Solutions Inc.
+                    6-6-3, Minami Yoshinari
+                    Aoba-ku, Sendai, Japan 989-3204.
+               Tel: +81-22-303-4012
+               Fax: +81-22-303-4015
+            E-mail: glenn@cysols.com
+
+                    Kenichi Nagami
+            Postal: INTEC NetCore Inc.
+                    1-3-3, Shin-suna
+                    Koto-ku, Tokyo, 135-0075
+                    Japan
+               Tel: +81-3-5665-5069
+            E-mail: nagami@inetcore.com
+
+                    Kazuhide Koide
+            Postal: KDDI CORPORATION
+                    GARDEN AIR TOWER 3-10-10, Iidabashi
+                    Chiyoda-ku, Tokyo, 102-8460 Japan
+               Tel: +81-3-6678-3378
+            E-mail: ka-koide@kddi.com
+
+        Support Group E-mail: mext@ietf.org
+        "
+        DESCRIPTION
+         "Copyright (c) 2009 IETF Trust and the persons identified
+          as authors of the code.  All rights reserved.
+
+          Redistribution and use in source and binary forms, with
+          or without modification, are permitted provided that the
+          following conditions are met:
+
+          - Redistributions of source code must retain the above
+            copyright notice, this list of conditions and the
+            following disclaimer.
+
+          - Redistributions in binary form must reproduce the
+            above copyright notice, this list of conditions and
+            the following disclaimer in the documentation and/or
+            other materials provided with the distribution.
+
+          - Neither the name of Internet Society, IETF or IETF
+            Trust, nor the names of specific contributors, may be
+            used to endorse or promote products derived from this
+            software without specific prior written permission.
+
+         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+         CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
+         WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+         WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+         PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+         COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+         INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+         CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+         PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+         DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+         CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+         CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+         OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+         SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+         DAMAGE.
+
+         This version of this MIB module is part of RFC 5488;
+         see the RFC itself for full legal notices."
+
+         REVISION    "200903100000Z"      -- 10 March 2009
+         DESCRIPTION "Initial version, published as RFC 5488."
+              ::= { mib-2  184 }
+
+  -- The NEMO MIB has the following primary groups
+
+  nemoNotifications        OBJECT IDENTIFIER ::= { nemoMIB 0 }
+  nemoObjects              OBJECT IDENTIFIER ::= { nemoMIB 1 }
+  nemoConformance          OBJECT IDENTIFIER ::= { nemoMIB 2 }
+  nemoCore                 OBJECT IDENTIFIER ::= { nemoObjects 1 }
+  nemoMr                   OBJECT IDENTIFIER ::= { nemoObjects 2 }
+  nemoCn                   OBJECT IDENTIFIER ::= { nemoObjects 3 }
+  nemoHa                   OBJECT IDENTIFIER ::= { nemoObjects 4 }
+
+   -- The sub groups
+
+  nemoSystem               OBJECT IDENTIFIER ::= { nemoCore 1 }
+  nemoBindings             OBJECT IDENTIFIER ::= { nemoCore 2 }
+
+  nemoConfiguration        OBJECT IDENTIFIER ::= { nemoCore 3 }
+  nemoStats                OBJECT IDENTIFIER ::= { nemoCore 4 }
+
+  nemoMrSystem             OBJECT IDENTIFIER ::= { nemoMr 1 }
+  nemoMrConf               OBJECT IDENTIFIER ::= { nemoMr 2 }
+  nemoMrRegistration       OBJECT IDENTIFIER ::= { nemoMr 3 }
+  nemoMrGlobalStats        OBJECT IDENTIFIER ::= { nemoMr 4 }
+
+  nemoHaAdvertisement      OBJECT IDENTIFIER ::= { nemoHa 1 }
+  nemoHaStats              OBJECT IDENTIFIER ::= { nemoHa 2 }
+  nemoHaRegistration       OBJECT IDENTIFIER ::= { nemoHa 3 }
+  nemoHaGlobalStats        OBJECT IDENTIFIER ::= { nemoHaStats 1 }
+
+  -- Textual Conventions
+NemoBURequestRejectionCode ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+               "The value of the status field in the Binding
+                Acknowledgment message when the Binding Update
+                was rejected for NEMO-specific reasons.
+               "
+       REFERENCE
+               "RFC 3963: Section 4.2"
+       SYNTAX  INTEGER {
+               mobileRouterOperationNotPermitted (140),
+               invalidPrefix                     (141),
+               notAuthorizedForPrefix            (142),
+               forwardingSetupFailed             (143)
+              }
+
+  --
+  --
+  -- nemoSystem group
+  --
+  --
+
+  nemoCapabilities OBJECT-TYPE
+      SYNTAX      BITS {
+                       mobileRouter       (0),
+                       homeAgentSupport   (1)
+                  }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+              "This object indicates the NEMO functions that
+               are supported by this managed entity.  Multiple
+               NEMO functions may be supported by a single
+               entity.
+              "
+      REFERENCE
+              "RFC 3963: Section 3"
+      ::= { nemoSystem 1 }
+
+  nemoStatus OBJECT-TYPE
+      SYNTAX      INTEGER { enabled(1), disabled(2) }
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+              "This object indicates whether the NEMO
+               function is enabled for the managed entity.  If it
+               is enabled, the agent discovery and registration
+               functions will be operational.
+
+               Changing the status from enabled(1) to disabled(2)
+               will terminate the agent discovery and registration
+               functions.  On the other hand, changing the status
+               from disabled(2) to enabled(1) will start the agent
+               discovery and registration functions.
+
+               The value of this object MUST remain unchanged
+               across reboots of the managed entity.
+              "
+      ::= { nemoSystem 2 }
+
+ nemoCounterDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime on the most recent occasion at
+             which any one or more of this NEMO entity's counters,
+             viz., counters with OID prefix 'nemoMrConf',
+             'nemoMrRegnCounters', 'nemoMrGlobalStats', or
+             'nemoHaGlobalStats', suffered a discontinuity.  If
+             no such discontinuities have occurred since the last
+             re-initialization of the local management subsystem,
+             then this object will have a zero value.
+            "
+    ::= { nemoStats 1 }
+ --
+ --
+
+ --   nemoConfiguration group
+ --
+ --
+
+nemoMrBLTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NemoMrBLEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table corresponds to the Binding Update List
+             (BL) that includes NEMO-related information and that
+             is maintained by the mobile router.  The table
+             holds a row for every binding that the mobile
+             router has established or is trying to establish.
+             Entries from the table are deleted as the lifetime
+             of the binding expires.
+            "
+    REFERENCE
+            "RFC 3775: Sections 4.5, 11.1
+             RFC 3963: Section 5.2"
+    ::= { nemoMrRegistration 1 }
+
+nemoMrBLEntry  OBJECT-TYPE
+    SYNTAX      NemoMrBLEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry pertaining to NEMO-related information
+             contained in a Binding Update sent by a NEMO-enabled
+             mobile router to its home agent.
+            "
+    AUGMENTS {mip6MnBLEntry}
+::= { nemoMrBLTable 1 }
+
+NemoMrBLEntry ::= SEQUENCE {
+    nemoMrBLMode     INTEGER,
+    nemoMrBLMrFlag   TruthValue,
+    nemoMrBLHomeAddressPrefixLength   InetAddressPrefixLength,
+    nemoMrBLCareofAddressPrefixLength InetAddressPrefixLength,
+    nemoMrBLActiveEgressIfIndex       InterfaceIndex,
+    nemoMrBLEstablishedHomeTunnelIfIndex InterfaceIndex
+    }
+nemoMrBLMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+      implicitMode (1),
+      explicitMode (2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "implicitMode(1): the Mobile Network Prefix Option
+             is not included in the Binding Update by the mobile
+             router.
+
+             explicitMode(2): the mobile router included one or
+             more Mobile Network Prefix Options in the Binding
+             Update.
+            "
+    REFERENCE
+            "RFC 3963: Section 5.2"
+    ::= { nemoMrBLEntry 1 }
+
+nemoMrBLMrFlag OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "true(1): the mobile router sent the Binding Update
+             with Mobile Router Flag set.
+
+             false(2): the mobile router did not send the Binding
+             Update with Mobile Router Flag set.  This implies that
+             the mobile router is acting as a mobile node.
+            "
+    REFERENCE
+            "RFC 3963: Sections 4.1, 5.1"
+    ::= { nemoMrBLEntry 2 }
+
+nemoMrBLHomeAddressPrefixLength  OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The prefix length of the mobile router's home network.
+            "
+    REFERENCE
+        "RFC 3963: Section 3"
+    ::= { nemoMrBLEntry 3 }
+
+nemoMrBLCareofAddressPrefixLength  OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The prefix length of the care-of address of the
+             mobile router.
+            "
+    REFERENCE
+        "RFC 3963: Section 3"
+    ::= { nemoMrBLEntry 4 }
+
+nemoMrBLActiveEgressIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The interface index of the currently active
+             egress interface.
+            "
+    REFERENCE
+        "RFC 3963: Section 5.5"
+    ::= { nemoMrBLEntry 5 }
+
+nemoMrBLEstablishedHomeTunnelIfIndex  OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The interface index of the tunnel established
+             between the mobile router and the home agent
+             for NEMO traffic.
+            "
+    REFERENCE
+        "RFC 3963: Section 5.5"
+    ::= { nemoMrBLEntry 6 }
+
+-- Mobile Router Registration Group Counters
+
+nemoMrRegnCounters OBJECT IDENTIFIER ::= { nemoMrRegistration 2 }
+
+nemoMrMobilityMessagesSent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of mobility messages, i.e., IPv6
+             datagrams with Mobility Header, sent by the mobile
+             node.  This will include Binding Updates sent by a
+             mobile router with the Mobile Router Flag set.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Sections 4.2, 6.1
+             RFC 3963: Section 4.1"
+    ::= {  nemoMrRegnCounters 1 }
+
+nemoMrMobilityMessagesRecd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of mobility messages, i.e., IPv6
+             datagrams with Mobility Header, received by the
+             mobile node.  This will include Binding
+             Acknowledgements with Mobile Router Flag set that
+             are sent to a mobile router.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Sections 4.2, 6.1
+             RFC 3963: Sections 4.1, 4.2"
+    ::= {  nemoMrRegnCounters 2 }
+
+nemoMrPrefixRegMode OBJECT-TYPE
+    SYNTAX INTEGER {
+              implicitMode       (1),
+              explicitMode       (2)
+           }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object indicates the mode in which the mobile
+             network prefixes will be registered with the home
+             agent.
+
+             implicitMode(1): the Mobile Network Prefix Option will
+             not be included in the Binding Update by the mobile
+             router.
+
+             explicitMode(2): the mobile router will include one or
+             more Mobile Network Prefix Options in the Binding
+             Update.
+
+             The value of this object MUST remain unchanged
+             across reboots of the managed entity.
+            "
+    REFERENCE
+            "RFC 3963: Section 5.2"
+    ::= { nemoMrRegistration 3 }
+
+nemoHaMobileNetworkPrefixTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NemoHaMobileNetworkPrefixEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains the mobile network prefixes
+             that the home agent maintains for the mobile router.
+             The mobile network prefixes in this table are
+             registered by Binding Updates or are manually
+             pre-configured.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.1.2"
+    ::= { nemoHaRegistration 1 }
+
+nemoHaMobileNetworkPrefixEntry OBJECT-TYPE
+    SYNTAX      NemoHaMobileNetworkPrefixEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry for a mobile network prefix.
+
+             The instances of the columnar objects in this entry
+             pertain to an interface for a particular value of
+             mip6BindingHomeAddressType, mip6BindingHomeAddress,
+             and nemoHaMobileNetworkPrefixSeqNo.
+
+             The nemoHaMobileNetworkPrefixSeqNo object is used to
+             distinguish between multiple instances of
+             the mobile network prefix in the same Binding Update
+             for the same set of mip6BindingHomeAddressType and
+             mip6BindingHomeAddress.
+
+             There is no upper-bound on the maximum number of
+             mobile network prefixes in a Binding Update but, for
+             practical purposes, the upper bound of the value
+
+             nemoHaMobileNetworkPrefixSeqNo is set to 1024.
+
+             Implementers need to be aware that if the total
+             number of octets in mip6BindingHomeAddress
+             exceeds 112, then OIDs of column
+             instances in this row will have more than 128
+             sub-identifiers and cannot be accessed using
+             SNMPv1, SNMPv2c, or SNMPv3.
+            "
+    INDEX  { mip6BindingHomeAddressType,
+             mip6BindingHomeAddress,
+             nemoHaMobileNetworkPrefixSeqNo
+}
+::= { nemoHaMobileNetworkPrefixTable 1 }
+
+NemoHaMobileNetworkPrefixEntry ::= SEQUENCE {
+    nemoHaMobileNetworkPrefixSeqNo       Unsigned32,
+    nemoHaMobileNetworkPrefixType        InetAddressType,
+    nemoHaMobileNetworkPrefix            InetAddress,
+    nemoHaMobileNetworkPrefixLength      Unsigned32,
+    nemoHaMobileNetworkPrefixSource      INTEGER
+}
+
+nemoHaMobileNetworkPrefixSeqNo OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A Binding Update may have multiple mobile network
+             prefixes.
+
+             This object, along with mip6BindingHomeAddressType
+             and mip6BindingHomeAddress, uniquely identifies a
+             row containing a single mobile network prefix for
+             a mobile router in this table.
+            "
+    REFERENCE
+            "RFC 3963: Sections 2, 6.1, 6.2"
+    ::= { nemoHaMobileNetworkPrefixEntry 1 }
+
+nemoHaMobileNetworkPrefixType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The address type for the mobile network prefix
+             that follows.
+            "
+    ::= { nemoHaMobileNetworkPrefixEntry 2 }
+
+nemoHaMobileNetworkPrefix OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A mobile network prefix related to the
+             corresponding Binding Update.
+
+             The type of the address represented by this object
+             is specified by the corresponding
+             nemoHaMobileNetworkPrefixType object.
+            "
+    REFERENCE
+            "RFC 3963: Sections 2, 6.1, 6.2"
+    ::= { nemoHaMobileNetworkPrefixEntry 3 }
+
+nemoHaMobileNetworkPrefixLength OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..128)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The length of the prefix specified by the corresponding
+             nemoHaMobileNetworkPrefix object.
+            "
+    REFERENCE
+            "RFC 3963: Sections 4.3, 6.1, 6.2"
+    ::= { nemoHaMobileNetworkPrefixEntry 4 }
+
+nemoHaMobileNetworkPrefixSource OBJECT-TYPE
+    SYNTAX      INTEGER {
+             configured    (1),
+             bindingUpdate (2)
+             }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The information source of the mobile network prefix
+             configured with the Binding Update.
+
+             configured(1): indicates that the mobile network prefix
+             has been manually pre-configured.
+
+             bindingUpdate(2): indicates that the information is
+             introduced to the home agent by the Mobile Network
+
+             Prefix Option in the Binding Updates received by the
+             home agent.
+            "
+    REFERENCE
+            "RFC 3963: Sections 4.3, 6.1, 6.2"
+    ::= { nemoHaMobileNetworkPrefixEntry 5 }
+
+nemoBindingCacheTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NemoBindingCacheEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "This table models the Binding Cache that includes
+            NEMO-related information and that is maintained by the
+            home agent.  Entries in this table are not required
+            to survive a reboot of the home agent.
+           "
+    REFERENCE
+            "RFC 3775: Sections 4.5, 9.1, 10.1,
+             RFC 3963: Section 6.1"
+    ::= { nemoBindings 1 }
+
+nemoBindingCacheEntry  OBJECT-TYPE
+    SYNTAX      NemoBindingCacheEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing additional information related
+             to NEMO-enabled entries in the Binding Cache table
+             of the home agent.
+            "
+    AUGMENTS {mip6BindingCacheEntry}
+::= { nemoBindingCacheTable 1 }
+
+NemoBindingCacheEntry ::= SEQUENCE {
+     nemoBindingMrFlag     TruthValue,
+     nemoBindingMrMode     INTEGER
+    }
+
+nemoBindingMrFlag OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "true(1): indicates that the Binding Cache entry is from
+             an entity acting as a mobile router.
+
+             false(2): implies that the Binding Cache entry is from
+             an entity acting as a mobile node.
+            "
+    REFERENCE
+            "RFC 3963: Sections 6.1.1, 6.2"
+    ::= { nemoBindingCacheEntry 1 }
+
+nemoBindingMrMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+      implicitMode(1),
+      explicitMode(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "implicitMode(1): the Mobile Network Prefix Option is
+             not included in the Binding Update by the mobile
+             router.
+
+             explicitMode(2): the mobile router included one or
+             more Mobile Network Prefix Options in the Binding
+             Update.
+            "
+    REFERENCE
+            "RFC 3963: Sections 5.2, 6.1.1, 6.2"
+    ::= { nemoBindingCacheEntry 2 }
+
+--
+-- nemoMrEgressIfTable
+--
+nemoMrEgressIfTable        OBJECT-TYPE
+     SYNTAX      SEQUENCE OF NemoMrEgressIfEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+             "A table representing the egress interfaces that
+              will be used by the mobile router for roaming to
+              foreign networks.  Each entry in this table
+              represents a configured egress interface.
+             "
+     ::= { nemoMrSystem 1 }
+
+nemoMrEgressIfEntry OBJECT-TYPE
+     SYNTAX      NemoMrEgressIfEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+             "An entry in the egress interface table.  It
+
+              represents a single egress interface entry.
+             "
+     INDEX  { nemoMrEgressIfIndex }
+     ::= { nemoMrEgressIfTable 1 }
+
+NemoMrEgressIfEntry ::=
+     SEQUENCE {
+      nemoMrEgressIfIndex             InterfaceIndex,
+      nemoMrEgressIfPriority          Unsigned32,
+      nemoMrEgressIfDescription       SnmpAdminString,
+      nemoMrEgressIfRoamHoldDownTime  Gauge32
+     }
+
+nemoMrEgressIfIndex  OBJECT-TYPE
+     SYNTAX      InterfaceIndex
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+             "The index of the interface on the mobile router.
+             "
+     ::= { nemoMrEgressIfEntry 1 }
+
+nemoMrEgressIfPriority   OBJECT-TYPE
+     SYNTAX      Unsigned32 (0..255)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+             "The priority configured to the egress interface.
+              This value will be configured to a value between 0
+              and 255.
+             "
+     ::= { nemoMrEgressIfEntry 2 }
+
+nemoMrEgressIfDescription   OBJECT-TYPE
+     SYNTAX      SnmpAdminString
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+             "A human-readable textual description of the egress
+              interface on the mobile router.
+             "
+     ::= { nemoMrEgressIfEntry 3 }
+
+nemoMrEgressIfRoamHoldDownTime  OBJECT-TYPE
+     SYNTAX      Gauge32
+     UNITS       "seconds"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+             "This object indicates the time for which the
+              egress interface will be held down during roaming
+              to avoid interface flapping.
+             "
+     ::= { nemoMrEgressIfEntry 4 }
+
+nemoMrDiscoveryRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of Modified Dynamic Home Agent Address
+             Discovery Requests, with Mobile Router Support Flag
+             set, sent by the mobile router.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Sections 10.5, 11.4.1
+             RFC 3963: Section 7.1"
+       ::= { nemoMrConf 1 }
+
+nemoMrDiscoveryReplies OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of Modified Dynamic Home Agent Address
+             Discovery Replies, with Mobile Router Support Flag
+             set, received by the mobile router.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Sections 10.5, 11.4.1
+             RFC 3963: Section 7.2"
+       ::= { nemoMrConf 2 }
+
+nemoMrDiscoveryRepliesRouterFlagZero OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of Modified Dynamic Home Agent Address
+             Discovery Replies, with Mobile Router Support Flag set
+             to 0 although the flag in the corresponding request
+             is set to 1.  It implies that there is no home agent
+             that supports mobile router functionality in the home
+             network.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Sections 10.5, 11.4.1
+             RFC 3963: Section 7.2"
+       ::= { nemoMrConf 3 }
+
+nemoMrMovedHome OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of times the mobile router has detected
+             movement from a foreign network to its home
+             network.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+        "RFC 3963: Section 3"
+        ::= { nemoMrConf 4 }
+
+nemoMrMovedOutofHome OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of times the mobile router has detected
+             movement to a foreign network from the home
+             network, has acquired a care-of address, and
+             has initiated the care-of address registration
+             process.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+        "RFC 3963: Section 3"
+        ::= { nemoMrConf 5 }
+
+nemoMrMovedFNtoFN OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of times the mobile router has detected
+             movement to/from a foreign network from/to another
+             foreign network.  Note that 'movement' implies
+             movement in layer 3, i.e., the mobile router's care-of
+             address changed, and it initiated the care-of address
+             registration process.
+
+             If there are multiple egress interfaces, this counter
+             counts the total number of movements.  The movement
+             as a mobile node of the mobile entity is not counted.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 3"
+        ::= { nemoMrConf 6 }
+
+nemoMrBetterIfDetected OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Number of times the NEMO entity has found an egress
+             interface with better priority.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+        ::= { nemoMrConf 7 }
+
+--
+-- nemoStats:nemoMrGlobalStats
+--
+
+nemoMrBindingAcksWONemoSupport  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements without
+             NEMO support received by the mobile router.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 5.3"
+        ::= { nemoMrGlobalStats 1 }
+
+nemoMrBindingAcksRegTypeChangeDisallowed  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             received by the mobile router with status code
+             indicating 'Registration type change disallowed'
+             (Code 139).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Section 9.5.1
+             RFC 3963: Section 6.2"
+        ::= { nemoMrGlobalStats 2 }
+
+nemoMrBindingAcksOperationNotPermitted  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             received by the mobile router with status code
+
+             indicating 'Mobile Router Operation not permitted'
+             (Code 140).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoMrGlobalStats 3 }
+
+nemoMrBindingAcksInvalidPrefix  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             received by the mobile router with status code
+             indicating 'Invalid Prefix' (Code 141).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoMrGlobalStats 4 }
+
+nemoMrBindingAcksNotAuthorizedForPrefix OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             received by the mobile router with status code
+             indicating 'Not Authorized for Prefix' (Code 142).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963 : Section 6.6"
+        ::= { nemoMrGlobalStats 5 }
+
+nemoMrBindingAcksForwardingSetupFailed OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             received by the mobile router with status code
+             indicating 'Forwarding Setup failed' (Code 143).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoMrGlobalStats 6 }
+
+nemoMrBindingAcksOtherError OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             received by the mobile router (Mobile Router Flag is
+             set) with status code other than:
+
+             successfully processed                  --(Code 0  )
+             mobileRouterOperationNotPermitted (140) --(Code 140)
+             invalidPrefix                     (141) --(Code 141)
+             notAuthorizedForPrefix            (142) --(Code 142)
+             forwardingSetupFailed             (143) --(Code 143)
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963 : Section 6.6"
+        ::= { nemoMrGlobalStats 7 }
+
+--
+-- nemoStats:nemoHaGlobalStats
+--
+
+nemoHaBUAcksWONemoSupport  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Acknowledgements
+             without NEMO support sent by the home agent.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 5.3"
+        ::= { nemoHaGlobalStats 1 }
+
+nemoHaBUAcksRegTypeChangeDisallowed  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Update requests
+             rejected by the home agent with status code
+             in the Binding Acknowledgement indicating
+             'Registration type change disallowed' (Code 139).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3775: Section 9.5.1
+             RFC 3963: Section 6.2"
+        ::= { nemoHaGlobalStats 2 }
+
+nemoHaBUAcksOperationNotPermitted  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Update requests
+             rejected by the home agent with status code in
+             the Binding Acknowledgement indicating 'Mobile
+             Router Operation not permitted' (Code 140).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoHaGlobalStats 3 }
+
+nemoHaBUAcksInvalidPrefix  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Update requests
+             rejected by the home agent with status code in
+             the Binding Acknowledgement indicating 'Invalid
+             Prefix' (Code 141).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoHaGlobalStats 4 }
+
+nemoHaBUAcksNotAuthorizedForPrefix OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Update requests
+             rejected by the home agent with status code in
+             the Binding Acknowledgement indicating 'Not
+             Authorized for Prefix' (Code 142).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoHaGlobalStats 5 }
+
+nemoHaBUAcksForwardingSetupFailed OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Update requests
+             rejected by the home agent with status code in
+             the Binding Acknowledgement indicating 'Forwarding
+             Setup failed' (Code 143).
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoHaGlobalStats 6 }
+
+nemoHaBUAcksOtherError OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of Binding Update requests
+             from mobile routers (Mobile Router Flag is set)
+             rejected by the home agent with status code
+             other than:
+
+             mobileRouterOperationNotPermitted (140)
+             invalidPrefix                     (141)
+             notAuthorizedForPrefix            (142)
+             forwardingSetupFailed             (143)
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoCounterDiscontinuityTime.
+            "
+    REFERENCE
+            "RFC 3963: Section 6.6"
+        ::= { nemoHaGlobalStats 7 }
+
+nemoHaCounterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NemoHaCounterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table containing registration statistics for all
+             mobile routers registered with the home agent.
+            "
+    ::= { nemoHaStats 2 }
+
+nemoHaCounterEntry  OBJECT-TYPE
+    SYNTAX      NemoHaCounterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Home agent registration statistics for a mobile
+             router.
+
+             Implementers need to be aware that if the total
+             number of octets in mip6BindingHomeAddress
+             exceeds 113, then OIDs of column instances in
+             this row will have more than 128 sub-identifiers and
+             cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
+            "
+    INDEX   { mip6BindingHomeAddressType,
+              mip6BindingHomeAddress
+            }
+    ::= { nemoHaCounterTable 1 }
+
+NemoHaCounterEntry      ::= SEQUENCE {
+    nemoHaBURequestsAccepted       Counter32,
+    nemoHaBURequestsDenied         Counter32,
+    nemoHaBCEntryCreationTime      DateAndTime,
+    nemoHaBUAcceptedTime           DateAndTime,
+    nemoHaBURejectionTime          DateAndTime,
+    nemoHaRecentBURejectionCode    NemoBURequestRejectionCode,
+    nemoHaCtrDiscontinuityTime     TimeStamp
+    }
+
+nemoHaBURequestsAccepted OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of Binding Update requests from the
+             mobile router accepted by the home agent.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoHaCtrDiscontinuityTime.
+            "
+    ::= { nemoHaCounterEntry 1 }
+
+nemoHaBURequestsDenied   OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "Total number of Binding Update requests from the
+             mobile router rejected by the home agent.
+
+             Discontinuities in the value of this counter can
+             occur at re-initialization of the management system,
+             and at other times as indicated by the value of
+             nemoHaCtrDiscontinuityTime.
+            "
+    ::= { nemoHaCounterEntry 2 }
+
+nemoHaBCEntryCreationTime   OBJECT-TYPE
+    SYNTAX      DateAndTime (SIZE (11))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The time when the current Binding Cache entry was
+             created for the mobile router.  An implementation
+             MUST return all 11 bytes of the DateAndTime
+             textual-convention so that a manager may retrieve
+             the offset from GMT time.
+            "
+    ::= { nemoHaCounterEntry 3 }
+
+nemoHaBUAcceptedTime  OBJECT-TYPE
+    SYNTAX      DateAndTime (SIZE (11))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The time at which the last Binding Update was
+             accepted by the home agent for this mobile router.
+             An implementation MUST return all 11 bytes of the
+             DateAndTime textual-convention so that a manager
+             may retrieve the offset from GMT time.
+            "
+    ::= { nemoHaCounterEntry 4 }
+
+nemoHaBURejectionTime  OBJECT-TYPE
+    SYNTAX      DateAndTime (SIZE (11))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The time at which the last Binding Update was
+             rejected by the home agent for this mobile router.
+             If there have been no rejections, then this object
+             will be inaccessible.  An implementation MUST return
+             all 11 bytes of the DateAndTime textual-convention
+             so that a manager may retrieve the offset from GMT
+
+             time.
+            "
+    ::= { nemoHaCounterEntry 5 }
+
+nemoHaRecentBURejectionCode  OBJECT-TYPE
+    SYNTAX      NemoBURequestRejectionCode
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The Status code (>= 128) in the latest Binding
+             Acknowledgment indicating a rejection, sent to this
+             mobile router.
+
+             If a Binding Update request is rejected and a Binding
+             Acknowledgment is not sent to this mobile router,
+             then this will be the value of the Status code that
+             corresponds to the reason of the rejection.  If there
+             have been no Binding Update request rejections, then
+             this object will be inaccessible.
+            "
+    ::= { nemoHaCounterEntry 6 }
+
+nemoHaCtrDiscontinuityTime OBJECT-TYPE
+   SYNTAX      TimeStamp
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+           "The value of sysUpTime on the most recent occasion
+            at which any one or more of the counters in this row,
+            viz., instances of 'nemoHaBURequestsAccepted' and
+            'nemoHaBURequestsDenied', suffered a discontinuity.
+            If no such discontinuity has occurred since the
+            last re-initialization of the local management
+            subsystem, then this object will have a zero value.
+           "
+   ::= { nemoHaCounterEntry 7 }
+
+--
+--
+-- nemoNotifications
+--
+--
+
+nemoHomeTunnelEstablished NOTIFICATION-TYPE
+    OBJECTS   {
+                nemoMrBLActiveEgressIfIndex,
+                nemoMrBLEstablishedHomeTunnelIfIndex,
+                mip6MnBLCOAType,
+                mip6MnBLCOA,
+                nemoMrBLHomeAddressPrefixLength,
+                nemoMrBLCareofAddressPrefixLength
+              }
+    STATUS    current
+    DESCRIPTION
+            "This notification is sent by the mobile router
+             every time the tunnel is established between the
+             home agent and the mobile router.
+            "
+    REFERENCE
+            "RFC 3963: Section 5.5"
+        ::= { nemoNotifications 1 }
+
+nemoHomeTunnelReleased NOTIFICATION-TYPE
+    OBJECTS {
+                nemoMrBLActiveEgressIfIndex,
+                nemoMrBLEstablishedHomeTunnelIfIndex,
+                mip6MnBLCOAType,
+                mip6MnBLCOA,
+                nemoMrBLHomeAddressPrefixLength,
+                nemoMrBLCareofAddressPrefixLength
+            }
+    STATUS    current
+    DESCRIPTION
+            "This notification is sent by the mobile router
+             every time the tunnel is deleted between the home
+             agent and the mobile router.
+            "
+    REFERENCE
+            "RFC 3963: Section 5.5"
+        ::= { nemoNotifications 2}
+
+-- Conformance information
+nemoGroups      OBJECT IDENTIFIER ::= { nemoConformance 1 }
+nemoCompliances OBJECT IDENTIFIER ::= { nemoConformance 2 }
+
+-- Units of conformance
+nemoSystemGroup    OBJECT-GROUP
+     OBJECTS {
+               nemoCapabilities,
+               nemoStatus
+    }
+     STATUS  current
+     DESCRIPTION
+             "A collection of objects for basic NEMO
+              monitoring.
+             "
+     ::= { nemoGroups 1 }
+
+nemoBindingCacheGroup    OBJECT-GROUP
+     OBJECTS {
+               nemoBindingMrFlag,
+               nemoBindingMrMode
+    }
+     STATUS  current
+     DESCRIPTION
+             "A collection of objects for monitoring the
+              NEMO extensions of the Binding Cache.
+             "
+     ::= { nemoGroups 2 }
+
+nemoStatsGroup    OBJECT-GROUP
+     OBJECTS {
+               nemoCounterDiscontinuityTime
+    }
+     STATUS  current
+     DESCRIPTION
+             "A collection of objects for
+              monitoring NEMO statistics.
+             "
+     ::= { nemoGroups 3 }
+
+nemoMrConfGroup   OBJECT-GROUP
+     OBJECTS {
+               nemoMrEgressIfPriority,
+               nemoMrEgressIfDescription,
+               nemoMrEgressIfRoamHoldDownTime,
+               nemoMrDiscoveryRequests,
+               nemoMrDiscoveryReplies,
+               nemoMrDiscoveryRepliesRouterFlagZero,
+               nemoMrMovedHome,
+               nemoMrMovedOutofHome,
+               nemoMrMovedFNtoFN,
+               nemoMrBetterIfDetected
+    }
+     STATUS  current
+     DESCRIPTION
+             "A collection of objects for monitoring
+              the configuration-related information on
+              the mobile router.
+             "
+     ::= { nemoGroups 4 }
+
+nemoMrRegistrationGroup  OBJECT-GROUP
+
+     OBJECTS {
+               nemoMrBLMode,
+               nemoMrBLMrFlag,
+               nemoMrBLHomeAddressPrefixLength,
+               nemoMrBLCareofAddressPrefixLength,
+               nemoMrBLActiveEgressIfIndex,
+               nemoMrBLEstablishedHomeTunnelIfIndex,
+               nemoMrMobilityMessagesSent,
+               nemoMrMobilityMessagesRecd,
+               nemoMrPrefixRegMode,
+               nemoMrBindingAcksWONemoSupport,
+               nemoMrBindingAcksRegTypeChangeDisallowed,
+               nemoMrBindingAcksOperationNotPermitted,
+               nemoMrBindingAcksInvalidPrefix,
+               nemoMrBindingAcksNotAuthorizedForPrefix,
+               nemoMrBindingAcksForwardingSetupFailed,
+               nemoMrBindingAcksOtherError
+    }
+     STATUS  current
+     DESCRIPTION
+             "A collection of objects for monitoring
+              the registration details and statistics for
+              the mobile router.
+             "
+     ::= { nemoGroups 5 }
+
+nemoHaSystemGroup    OBJECT-GROUP
+    OBJECTS {
+              nemoHaMobileNetworkPrefixType,
+              nemoHaMobileNetworkPrefix,
+              nemoHaMobileNetworkPrefixLength,
+              nemoHaMobileNetworkPrefixSource
+   }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects for basic NEMO
+             configuration monitoring at the home agent.
+            "
+    ::= { nemoGroups 6 }
+
+nemoHaStatsGroup   OBJECT-GROUP
+    OBJECTS {
+              nemoHaBURequestsAccepted,
+              nemoHaBURequestsDenied,
+              nemoHaBCEntryCreationTime,
+              nemoHaBUAcceptedTime,
+              nemoHaBURejectionTime,
+              nemoHaRecentBURejectionCode,
+              nemoHaCtrDiscontinuityTime
+   }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects for monitoring NEMO
+             registration-related statistics pertaining to
+             the mobile routers registered with the home agent.
+            "
+    ::= { nemoGroups 7 }
+
+nemoHaGlobalStatsGroup   OBJECT-GROUP
+    OBJECTS {
+              nemoHaBUAcksWONemoSupport,
+              nemoHaBUAcksRegTypeChangeDisallowed,
+              nemoHaBUAcksOperationNotPermitted,
+              nemoHaBUAcksInvalidPrefix,
+              nemoHaBUAcksNotAuthorizedForPrefix,
+              nemoHaBUAcksForwardingSetupFailed,
+              nemoHaBUAcksOtherError
+   }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects for monitoring basic
+             NEMO advertisement and registration statistics
+             on a home agent.
+            "
+    ::= { nemoGroups 8 }
+
+nemoNotificationGroup   NOTIFICATION-GROUP
+    NOTIFICATIONS {
+             nemoHomeTunnelEstablished,
+             nemoHomeTunnelReleased
+   }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notifications from a home agent
+             or correspondent node to the manager about the
+             tunnel status of the mobile router.
+            "
+    ::= { nemoGroups 9 }
+
+-- Compliance statements
+nemoCoreCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities
+             that implement the NEMO-MIB.
+             "
+
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoSystemGroup
+                          }
+     ::= { nemoCompliances 1 }
+
+nemoCompliance2 MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+             implement the NEMO-MIB and support monitoring of
+             the Binding Cache.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements,
+             expressed in OBJECT-clause form in this description:
+
+             -- OBJECT      mip6BindingHomeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6BindingHomeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoSystemGroup,
+                            nemoBindingCacheGroup
+                          }
+     ::= { nemoCompliances 2 }
+
+nemoCoreReadOnlyCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities
+             that implement the NEMO-MIB without support
+             for read-write (i.e., in read-only mode).
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoSystemGroup
+                          }
+
+     OBJECT      nemoStatus
+     MIN-ACCESS  read-only
+     DESCRIPTION
+            "Write access is not required."
+     ::= { nemoCompliances 3 }
+
+nemoReadOnlyCompliance2 MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+             implement the NEMO-MIB without support for read-write
+             (i.e., in read-only mode) and with support for
+             monitoring of the Binding Cache.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements,
+             expressed in OBJECT-clause form in this description:
+
+             -- OBJECT      mip6BindingHomeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6BindingHomeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoSystemGroup,
+                            nemoBindingCacheGroup
+                          }
+     OBJECT      nemoStatus
+     MIN-ACCESS  read-only
+     DESCRIPTION
+            "Write access is not required."
+     ::= { nemoCompliances 4 }
+
+nemoMrCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+
+             implement the NEMO-MIB for monitoring configuration-
+             related information, registration details, and
+             statistics on a mobile router.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements,
+             expressed in OBJECT-clause form in this description:
+
+             -- OBJECT      mip6MnHomeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6MnHomeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6MnBLNodeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnBLNodeAddress
+             --     object.
+             --
+             -- OBJECT      mip6MnBLNodeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnBLNodeAddress
+             --     object.
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoStatsGroup,
+                            nemoMrConfGroup,
+                            nemoMrRegistrationGroup
+                          }
+     ::= { nemoCompliances 5 }
+
+nemoMrReadOnlyCompliance2 MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+
+             implement the NEMO-MIB without support for read-
+             write (i.e., in read-only mode) and with support for
+             monitoring of configuration-related information,
+             registration details, and statistics on a mobile
+             router.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements,
+             expressed in OBJECT-clause form in this description:
+
+             -- OBJECT      mip6MnHomeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6MnHomeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6MnBLNodeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnBLNodeAddress
+             --     object.
+             --
+             -- OBJECT      mip6MnBLNodeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6MnBLNodeAddress
+             --     object.
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoStatsGroup,
+                            nemoMrConfGroup,
+                            nemoMrRegistrationGroup
+                          }
+
+     OBJECT      nemoMrPrefixRegMode
+     MIN-ACCESS  read-only
+     DESCRIPTION
+            "Write access is not required."
+     ::= { nemoCompliances 6 }
+
+nemoHaCoreCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+             implement the NEMO-MIB for configuration monitoring
+             at the home agent.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements,
+             expressed in OBJECT-clause form in this description:
+
+             -- OBJECT      mip6BindingHomeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6BindingHomeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoHaSystemGroup
+                          }
+     ::= { nemoCompliances 7 }
+
+nemoHaCompliance2 MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+             implement the NEMO-MIB with support for monitoring
+             of the home agent functionality, specifically the
+             home-agent-registration-related statistics.
+
+             There are a number of INDEX objects that cannot be
+             represented in the form of OBJECT clauses in SMIv2,
+             but for which there are compliance requirements,
+             expressed in OBJECT-clause form in this description:
+
+             -- OBJECT      mip6BindingHomeAddressType
+             -- SYNTAX      InetAddressType { ipv6(2) }
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             -- OBJECT      mip6BindingHomeAddress
+             -- SYNTAX      InetAddress (SIZE(16))
+             -- DESCRIPTION
+             --     This MIB module requires support for global
+             --     IPv6 addresses for the mip6BindingHomeAddress
+             --     object.
+             --
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoHaSystemGroup,
+                            nemoHaStatsGroup,
+                            nemoHaGlobalStatsGroup
+                          }
+     ::= { nemoCompliances 8 }
+
+nemoNotificationCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+            "The compliance statement for SNMP entities that
+             implement the NEMO-MIB and support Notification
+             from the home agent.
+             "
+     MODULE  -- this module
+         MANDATORY-GROUPS { nemoNotificationGroup
+                          }
+     ::= { nemoCompliances 9 }
+
+END
diff --git a/snmp_builder/mibs/NETWORK-SERVICES-MIB.mib b/snmp_builder/mibs/NETWORK-SERVICES-MIB.mib
new file mode 100644
index 0000000..0f2cabe
--- /dev/null
+++ b/snmp_builder/mibs/NETWORK-SERVICES-MIB.mib
@@ -0,0 +1,626 @@
+NETWORK-SERVICES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2
+      FROM SNMPv2-SMI
+    TimeStamp, TEXTUAL-CONVENTION
+      FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+application MODULE-IDENTITY
+    LAST-UPDATED "200003030000Z"
+    ORGANIZATION "IETF Mail and Directory Management Working Group"
+
+    CONTACT-INFO
+      "        Ned Freed
+
+       Postal: Innosoft International, Inc.
+               1050 Lakes Drive
+               West Covina, CA 91790
+               US
+
+          Tel: +1 626 919 3600
+          Fax: +1 626 919 3614
+
+       E-Mail: ned.freed@innosoft.com"
+    DESCRIPTION
+      "The MIB module describing network service applications"
+    REVISION "200003030000Z"
+    DESCRIPTION
+      "This revision, published in RFC 2788, changes a number of
+       DisplayStrings to SnmpAdminStrings. Note that this change
+       is not strictly supported by SMIv2.  However, the alternative
+       of deprecating the old objects and defining new objects
+       would have a more adverse impact on backward compatibility
+       and interoperability, given the particular semantics of
+       these objects. The defining reference for distinguished
+       names has also been updated from RFC 1779 to RFC 2253."
+    REVISION "199905120000Z"
+    DESCRIPTION
+      "This revision fixes a few small technical problems found
+       in previous versions, mostly in regards to the conformance
+       groups for different versions of this MIB.  No changes have
+       been made to the objects this MIB defines since RFC 2248."
+    REVISION "199708170000Z"
+    DESCRIPTION
+      "This revision, published in RFC 2248, adds the
+       applDescription and applURL objects, adds the quiescing
+       state to the applOperStatus object and renames the MIB
+       from the APPLICATION-MIB to the NETWORK-SERVICE-MIB."
+    REVISION "199311280000Z"
+    DESCRIPTION
+      "The original version of this MIB was published in RFC 1565"
+    ::= {mib-2 27}
+
+-- Textual conventions
+
+-- DistinguishedName is used to refer to objects in the
+-- directory.
+
+DistinguishedName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS current
+    DESCRIPTION
+        "A Distinguished Name represented in accordance with
+         RFC 2253, presented in the UTF-8 charset defined in
+         RFC 2279."
+    SYNTAX OCTET STRING (SIZE (0..255))
+
+-- Uniform Resource Locators are stored in URLStrings.
+
+URLString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS current
+    DESCRIPTION
+        "A Uniform Resource Locator represented in accordance
+         with RFCs 1738 and 2368, presented in the NVT ASCII
+         charset defined in RFC 854."
+    SYNTAX OCTET STRING (SIZE (0..255))
+
+-- The basic applTable contains a list of the application
+-- entities.
+
+applTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ApplEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The table holding objects which apply to all different
+         kinds of applications providing network services.
+         Each network service application capable of being
+         monitored should have a single entry in this table."
+    ::= {application 1}
+
+applEntry OBJECT-TYPE
+    SYNTAX ApplEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+      "An entry associated with a single network service
+       application."
+    INDEX {applIndex}
+    ::= {applTable 1}
+
+ApplEntry ::= SEQUENCE {
+    applIndex
+        INTEGER,
+    applName
+        SnmpAdminString,
+    applDirectoryName
+
+        DistinguishedName,
+    applVersion
+        SnmpAdminString,
+    applUptime
+        TimeStamp,
+    applOperStatus
+        INTEGER,
+    applLastChange
+        TimeStamp,
+    applInboundAssociations
+        Gauge32,
+    applOutboundAssociations
+        Gauge32,
+    applAccumulatedInboundAssociations
+        Counter32,
+    applAccumulatedOutboundAssociations
+        Counter32,
+    applLastInboundActivity
+        TimeStamp,
+    applLastOutboundActivity
+        TimeStamp,
+    applRejectedInboundAssociations
+        Counter32,
+    applFailedOutboundAssociations
+        Counter32,
+    applDescription
+        SnmpAdminString,
+    applURL
+        URLString
+}
+
+applIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+      "An index to uniquely identify the network service
+       application. This attribute is the index used for
+       lexicographic ordering of the table."
+    ::= {applEntry 1}
+
+applName OBJECT-TYPE
+    SYNTAX SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The name the network service application chooses to be
+       known by."
+    ::= {applEntry 2}
+
+applDirectoryName OBJECT-TYPE
+    SYNTAX DistinguishedName
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The Distinguished Name of the directory entry where
+       static information about this application is stored.
+       An empty string indicates that no information about
+       the application is available in the directory."
+    ::= {applEntry 3}
+
+applVersion OBJECT-TYPE
+    SYNTAX SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The version of network service application software.
+       This field is usually defined by the vendor of the
+       network service application software."
+    ::= {applEntry 4}
+applUptime OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The value of sysUpTime at the time the network service
+       application was last initialized.  If the application was
+       last initialized prior to the last initialization of the
+       network management subsystem, then this object contains
+       a zero value."
+    ::= {applEntry 5}
+
+applOperStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+      up(1),
+      down(2),
+      halted(3),
+      congested(4),
+      restarting(5),
+      quiescing(6)
+    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "Indicates the operational status of the network service
+       application. 'down' indicates that the network service is
+
+       not available. 'up' indicates that the network service
+       is operational and available.  'halted' indicates that the
+       service is operational but not available.  'congested'
+       indicates that the service is operational but no additional
+       inbound associations can be accommodated.  'restarting'
+       indicates that the service is currently unavailable but is
+       in the process of restarting and will be available soon.
+       'quiescing' indicates that service is currently operational
+       but is in the process of shutting down. Additional inbound
+       associations may be rejected by applications in the
+       'quiescing' state."
+    ::= {applEntry 6}
+
+applLastChange OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The value of sysUpTime at the time the network service
+       application entered its current operational state.  If
+       the current state was entered prior to the last
+       initialization of the local network management subsystem,
+       then this object contains a zero value."
+    ::= {applEntry 7}
+
+applInboundAssociations OBJECT-TYPE
+    SYNTAX Gauge32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The number of current associations to the network service
+       application, where it is the responder.  An inbound
+       association occurs when another application successfully
+       connects to this one."
+    ::= {applEntry 8}
+
+applOutboundAssociations OBJECT-TYPE
+    SYNTAX Gauge32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The number of current associations to the network service
+       application, where it is the initiator.  An outbound
+       association occurs when this application successfully
+       connects to another one."
+    ::= {applEntry 9}
+
+applAccumulatedInboundAssociations OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The total number of associations to the application entity
+       since application initialization, where it was the responder."
+    ::= {applEntry 10}
+
+applAccumulatedOutboundAssociations OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The total number of associations to the application entity
+       since application initialization, where it was the initiator."
+    ::= {applEntry 11}
+
+applLastInboundActivity OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The value of sysUpTime at the time this application last
+       had an inbound association.  If the last association
+       occurred prior to the last initialization of the network
+       subsystem, then this object contains a zero value."
+    ::= {applEntry 12}
+
+applLastOutboundActivity OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The value of sysUpTime at the time this application last
+       had an outbound association.  If the last association
+       occurred prior to the last initialization of the network
+       subsystem, then this object contains a zero value."
+    ::= {applEntry 13}
+
+applRejectedInboundAssociations OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The total number of inbound associations the application
+       entity has rejected, since application initialization.
+       Rejected associations are not counted in the accumulated
+       association totals.  Note that this only counts
+
+       associations the application entity has rejected itself;
+       it does not count rejections that occur at lower layers
+       of the network.  Thus, this counter may not reflect the
+       true number of failed inbound associations."
+    ::= {applEntry 14}
+
+applFailedOutboundAssociations OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The total number associations where the application entity
+       is initiator and association establishment has failed,
+       since application initialization.  Failed associations are
+       not counted in the accumulated association totals."
+    ::= {applEntry 15}
+
+applDescription OBJECT-TYPE
+    SYNTAX SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "A text description of the application.  This information
+       is intended to identify and briefly describe the
+       application in a status display."
+    ::= {applEntry 16}
+
+applURL OBJECT-TYPE
+    SYNTAX URLString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "A URL pointing to a description of the application.
+       This information is intended to identify and describe
+       the application in a status display."
+    ::= {applEntry 17}
+
+-- The assocTable augments the information in the applTable
+-- with information about associations.  Note that two levels
+-- of compliance are specified below, depending on whether
+-- association monitoring is mandated.
+
+assocTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AssocEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The table holding a set of all active application
+
+         associations."
+    ::= {application 2}
+
+assocEntry OBJECT-TYPE
+    SYNTAX AssocEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+      "An entry associated with an association for a network
+       service application."
+    INDEX {applIndex, assocIndex}
+    ::= {assocTable 1}
+
+AssocEntry ::= SEQUENCE {
+    assocIndex
+        INTEGER,
+    assocRemoteApplication
+        SnmpAdminString,
+    assocApplicationProtocol
+        OBJECT IDENTIFIER,
+    assocApplicationType
+        INTEGER,
+    assocDuration
+        TimeStamp
+}
+
+assocIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+      "An index to uniquely identify each association for a network
+       service application.  This attribute is the index that is
+       used for lexicographic ordering of the table.  Note that the
+       table is also indexed by the applIndex."
+    ::= {assocEntry 1}
+
+assocRemoteApplication OBJECT-TYPE
+    SYNTAX SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The name of the system running remote network service
+       application.  For an IP-based application this should be
+       either a domain name or IP address.  For an OSI application
+       it should be the string encoded distinguished name of the
+       managed object.  For X.400(1984) MTAs which do not have a
+       Distinguished Name, the RFC 2156 syntax 'mta in
+
+       globalid' used in X400-Received: fields can be used. Note,
+       however, that not all connections an MTA makes are
+       necessarily to another MTA."
+    ::= {assocEntry 2}
+
+assocApplicationProtocol OBJECT-TYPE
+    SYNTAX OBJECT IDENTIFIER
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "An identification of the protocol being used for the
+       application.  For an OSI Application, this will be the
+       Application Context.  For Internet applications, OID
+       values of the form {applTCPProtoID port} or {applUDPProtoID
+       port} are used for TCP-based and UDP-based protocols,
+       respectively. In either case 'port' corresponds to the
+       primary port number being used by the protocol. The
+       usual IANA procedures may be used to register ports for
+       new protocols."
+    ::= {assocEntry 3}
+
+assocApplicationType OBJECT-TYPE
+    SYNTAX INTEGER {
+        uainitiator(1),
+        uaresponder(2),
+        peerinitiator(3),
+        peerresponder(4)}
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "This indicates whether the remote application is some type of
+       client making use of this network service (e.g., a Mail User
+       Agent) or a server acting as a peer. Also indicated is whether
+       the remote end initiated an incoming connection to the network
+       service or responded to an outgoing connection made by the
+       local application.  MTAs and messaging gateways are
+       considered to be peers for the purposes of this variable."
+    ::= {assocEntry 4}
+
+assocDuration OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+      "The value of sysUpTime at the time this association was
+       started.  If this association started prior to the last
+       initialization of the network subsystem, then this
+       object contains a zero value."
+    ::= {assocEntry 5}
+
+-- Conformance information
+
+applConformance OBJECT IDENTIFIER ::= {application 3}
+
+applGroups      OBJECT IDENTIFIER ::= {applConformance 1}
+applCompliances OBJECT IDENTIFIER ::= {applConformance 2}
+
+-- Compliance statements
+
+applCompliance MODULE-COMPLIANCE
+    STATUS obsolete
+    DESCRIPTION
+      "The compliance statement for RFC 1565 implementations
+       which support the Network Services Monitoring MIB
+       for basic monitoring of network service applications.
+       This is the basic compliance statement for RFC 1565."
+    MODULE
+      MANDATORY-GROUPS {applRFC1565Group}
+    ::= {applCompliances 1}
+
+assocCompliance MODULE-COMPLIANCE
+    STATUS obsolete
+    DESCRIPTION
+      "The compliance statement for RFC 1565 implementations
+       which support the Network Services Monitoring MIB
+       for basic monitoring of network service applications
+       and their associations."
+    MODULE
+      MANDATORY-GROUPS {applRFC1565Group, assocRFC1565Group}
+    ::= {applCompliances 2}
+
+applRFC2248Compliance MODULE-COMPLIANCE
+    STATUS deprecated
+    DESCRIPTION
+      "The compliance statement for RFC 2248 implementations
+       which support the Network Services Monitoring MIB
+       for basic monitoring of network service applications."
+    MODULE
+      MANDATORY-GROUPS {applRFC2248Group}
+    ::= {applCompliances 3}
+
+assocRFC2248Compliance MODULE-COMPLIANCE
+    STATUS deprecated
+    DESCRIPTION
+      "The compliance statement for RFC 2248 implementations
+
+       which support the Network Services Monitoring MIB for
+       basic monitoring of network service applications and
+       their associations."
+    MODULE
+      MANDATORY-GROUPS {applRFC2248Group, assocRFC2248Group}
+    ::= {applCompliances 4}
+
+applRFC2788Compliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+      "The compliance statement for RFC 2788 implementations
+       which support the Network Services Monitoring MIB
+       for basic monitoring of network service applications."
+    MODULE
+      MANDATORY-GROUPS {applRFC2788Group}
+    ::= {applCompliances 5}
+
+assocRFC2788Compliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+      "The compliance statement for RFC 2788 implementations
+       which support the Network Services Monitoring MIB for
+       basic monitoring of network service applications and
+       their associations."
+    MODULE
+      MANDATORY-GROUPS {applRFC2788Group, assocRFC2788Group}
+    ::= {applCompliances 6}
+
+-- Units of conformance
+
+applRFC1565Group OBJECT-GROUP
+    OBJECTS {
+      applName, applVersion, applUptime, applOperStatus,
+      applLastChange, applInboundAssociations,
+      applOutboundAssociations, applAccumulatedInboundAssociations,
+      applAccumulatedOutboundAssociations, applLastInboundActivity,
+      applLastOutboundActivity, applRejectedInboundAssociations,
+      applFailedOutboundAssociations}
+    STATUS obsolete
+    DESCRIPTION
+      "A collection of objects providing basic monitoring of
+       network service applications.  This is the original set
+       of such objects defined in RFC 1565."
+    ::= {applGroups 7}
+
+assocRFC1565Group OBJECT-GROUP
+    OBJECTS {
+
+      assocRemoteApplication, assocApplicationProtocol,
+      assocApplicationType, assocDuration}
+    STATUS obsolete
+    DESCRIPTION
+      "A collection of objects providing basic monitoring of
+       network service applications' associations.  This is the
+       original set of such objects defined in RFC 1565."
+    ::= {applGroups 2}
+
+applRFC2248Group OBJECT-GROUP
+    OBJECTS {
+      applName, applVersion, applUptime, applOperStatus,
+      applLastChange, applInboundAssociations,
+      applOutboundAssociations, applAccumulatedInboundAssociations,
+      applAccumulatedOutboundAssociations, applLastInboundActivity,
+      applLastOutboundActivity, applRejectedInboundAssociations,
+      applFailedOutboundAssociations, applDescription, applURL}
+    STATUS deprecated
+    DESCRIPTION
+      "A collection of objects providing basic monitoring of
+       network service applications.  This group was originally
+       defined in RFC 2248; note that applDirectoryName is
+       missing."
+    ::= {applGroups 3}
+
+assocRFC2248Group OBJECT-GROUP
+    OBJECTS {
+      assocRemoteApplication, assocApplicationProtocol,
+      assocApplicationType, assocDuration}
+    STATUS deprecated
+    DESCRIPTION
+      "A collection of objects providing basic monitoring of
+       network service applications' associations.  This group
+       was originally defined by RFC 2248."
+    ::= {applGroups 4}
+
+applRFC2788Group OBJECT-GROUP
+    OBJECTS {
+      applName, applDirectoryName, applVersion, applUptime,
+      applOperStatus, applLastChange, applInboundAssociations,
+      applOutboundAssociations, applAccumulatedInboundAssociations,
+      applAccumulatedOutboundAssociations, applLastInboundActivity,
+      applLastOutboundActivity, applRejectedInboundAssociations,
+      applFailedOutboundAssociations, applDescription, applURL}
+    STATUS current
+    DESCRIPTION
+      "A collection of objects providing basic monitoring of
+       network service applications.  This is the appropriate
+
+       group for RFC 2788 -- it adds the applDirectoryName object
+       missing in RFC 2248."
+    ::= {applGroups 5}
+
+assocRFC2788Group OBJECT-GROUP
+    OBJECTS {
+      assocRemoteApplication, assocApplicationProtocol,
+      assocApplicationType, assocDuration}
+    STATUS current
+    DESCRIPTION
+      "A collection of objects providing basic monitoring of
+       network service applications' associations.  This is
+       the appropriate group for RFC 2788."
+    ::= {applGroups 6}
+
+-- OIDs of the form {applTCPProtoID port} are intended to be used
+-- for TCP-based protocols that don't have OIDs assigned by other
+-- means. {applUDPProtoID port} serves the same purpose for
+-- UDP-based protocols. In either case 'port' corresponds to
+-- the primary port number being used by the protocol. For example,
+-- assuming no other OID is assigned for SMTP, an OID of
+-- {applTCPProtoID 25} could be used, since SMTP is a TCP-based
+-- protocol that uses port 25 as its primary port.
+
+applTCPProtoID OBJECT IDENTIFIER ::= {application 4}
+applUDPProtoID OBJECT IDENTIFIER ::= {application 5}
+
+END
diff --git a/snmp_builder/mibs/NHRP-MIB.mib b/snmp_builder/mibs/NHRP-MIB.mib
new file mode 100644
index 0000000..8e5e855
--- /dev/null
+++ b/snmp_builder/mibs/NHRP-MIB.mib
@@ -0,0 +1,2596 @@
+NHRP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+    OBJECT-TYPE, MODULE-IDENTITY, mib-2, Integer32,
+    Counter32, Unsigned32
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
+    TimeStamp
+        FROM SNMPv2-TC
+    ifIndex
+        FROM IF-MIB
+    AddressFamilyNumbers
+        FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
+    ;
+
+nhrpMIB MODULE-IDENTITY
+    LAST-UPDATED "9908260000Z"  -- August 26, 1999
+    ORGANIZATION "Internetworking Over NBMA (ion) Working Group"
+    CONTACT-INFO
+        "Maria Greene (maria@xedia.com)
+         Contractor
+
+         Joan Cucchiara (joan@ironbridgenetworks.com)
+         IronBridge Networks
+
+         James V. Luciani (luciani@baynetworks.com)
+         Bay Networks"
+    DESCRIPTION
+        "This MIB contains managed object definitions for the Next
+        Hop Resolution Procol, NHRP, as defined in RFC 2332 [17]."
+
+    -- revision history
+
+    REVISION     "9908260000Z"  -- August 26, 1999
+    DESCRIPTION  "Initial version, published as RFC 2677."
+    ::= { mib-2 71 }
+
+--****************************************************************
+ -- NHRP Textual Conventions
+ --****************************************************************
+
+ NhrpGenAddr ::= TEXTUAL-CONVENTION
+     STATUS      current
+     DESCRIPTION
+         "The value of an internetwork layer or NBMA address."
+     SYNTAX      OCTET STRING (SIZE (0..64))
+
+ nhrpObjects OBJECT IDENTIFIER ::= { nhrpMIB 1 }
+
+ --****************************************************************
+ -- NHRP General (Client and Server) Objects
+ --****************************************************************
+
+ nhrpGeneralObjects OBJECT IDENTIFIER ::= { nhrpObjects 1 }
+
+ --
+ --  The following scalar is to be used to
+ --  provided indices for the
+ --  nhrpClientTable, and/or the nhrpServerTable.
+ --
+
+ nhrpNextIndex   OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+         "This scalar is used for creating rows in the
+         nhrpClientTable and the nhrpServerTable.
+         The value of this variable is a currently unused value
+         for nhrpClientIndex and nhrpServerIndex.
+
+         The value returned when reading this variable must be
+         unique for the NHC's and NHS's indices associated with
+         this row. Subsequent attempts to read this variable
+         must return different values.
+
+         NOTE:  this object exists in the General Group because
+         it is to be used in establishing rows in the
+         nhrpClientTable and the nhrpServerTable.  In other words,
+         the value retrieved from this object could become the
+         value of nhrpClientIndex and nhprServerIndex.
+
+         In the situation of an agent re-initialization the value
+         of this object must be saved in non-volatile storage.
+
+         This variable will return the special value 0 if no new
+         rows can be created."
+     ::= { nhrpGeneralObjects 1 }
+
+     --
+     -- The NHRP Cache Table
+     --
+
+     nhrpCacheTable OBJECT-TYPE
+         SYNTAX      SEQUENCE OF NhrpCacheEntry
+         MAX-ACCESS  not-accessible
+         STATUS      current
+    DESCRIPTION
+        "This table contains mappings between internetwork layer
+        addresses and NBMA subnetwork layer addresses."
+    ::= { nhrpGeneralObjects 2 }
+
+nhrpCacheEntry OBJECT-TYPE
+    SYNTAX      NhrpCacheEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A cached mapping between an internetwork layer address
+        and an NBMA address. Entries can be created by the
+        network administrator using the nhrpCacheRowStatus
+        column, or they may be added dynamically based on
+        protocol operation (including NHRP, SCSP, and others,
+        such as ATMARP).
+
+        When created based by NHRP protocol operations
+        this entry is largely based on contents contained in
+        the Client Information Entry (CIE).
+
+        Zero or more Client Information Entries (CIEs) may be
+        included in the NHRP Packet. For a complete description
+        of the CIE, refer to Section 5.2.0.1 of
+        RFC 2332 [17]."
+    INDEX       {
+                    nhrpCacheInternetworkAddrType,
+                    nhrpCacheInternetworkAddr,
+                    ifIndex,
+                    nhrpCacheIndex
+                }
+    ::= { nhrpCacheTable 1 }
+
+NhrpCacheEntry ::= SEQUENCE {
+    nhrpCacheInternetworkAddrType    AddressFamilyNumbers,
+    nhrpCacheInternetworkAddr        NhrpGenAddr,
+    nhrpCacheIndex                   Unsigned32,
+    nhrpCachePrefixLength            Integer32,
+    nhrpCacheNextHopInternetworkAddr NhrpGenAddr,
+    nhrpCacheNbmaAddrType            AddressFamilyNumbers,
+    nhrpCacheNbmaAddr                NhrpGenAddr,
+    nhrpCacheNbmaSubaddr             NhrpGenAddr,
+    nhrpCacheType                    INTEGER,
+    nhrpCacheState                   INTEGER,
+    nhrpCacheHoldingTimeValid        TruthValue,
+    nhrpCacheHoldingTime             Unsigned32,
+    nhrpCacheNegotiatedMtu           Integer32,
+    nhrpCachePreference              Integer32,
+    nhrpCacheStorageType             StorageType,
+    nhrpCacheRowStatus               RowStatus
+
+}
+
+nhrpCacheInternetworkAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The internetwork layer address type of this Next Hop
+        Resolution Cache entry. The value of this object indicates
+        how to interpret the values of nhrpCacheInternetworkAddr
+        and nhrpCacheNextHopInternetworkAddr."
+    ::= { nhrpCacheEntry 1 }
+
+nhrpCacheInternetworkAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork address of the
+        destination."
+    ::= { nhrpCacheEntry 2 }
+
+nhrpCacheIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for this entry that has local
+        significance within the scope of the General
+        Group.  This identifier is used here to
+        uniquely identify this row, and also used
+        in the 'nhrpPurgeTable' for the value of
+        the 'nhrpPurgeCacheIdentifier'."
+    ::= { nhrpCacheEntry 3 }
+
+nhrpCachePrefixLength OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bits that define the internetwork layer
+        prefix associated with the nhrpCacheInternetworkAddr."
+    ::= { nhrpCacheEntry 4 }
+
+nhrpCacheNextHopInternetworkAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork address of the next hop."
+    ::= { nhrpCacheEntry 5 }
+
+nhrpCacheNbmaAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA address type. The value of this
+        object indicates how to interpret
+        the values of nhrpCacheNbmaAddr and
+        nhrpCacheNbmaSubaddr."
+    ::= { nhrpCacheEntry 6 }
+
+nhrpCacheNbmaAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the NBMA subnetwork address of the next
+        hop."
+    ::= { nhrpCacheEntry 7 }
+
+nhrpCacheNbmaSubaddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the NBMA subaddress of the next hop. If
+        there is no subaddress concept for the NBMA address
+        family, this value will be a zero-length OCTET STRING."
+    ::= { nhrpCacheEntry 8 }
+
+nhrpCacheType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    register(2),
+                    resolveAuthoritative(3),
+                    resoveNonauthoritative(4),
+                    transit(5),
+                    administrativelyAdded(6),
+                    atmarp(7),
+                    scsp(8)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An indication of how this cache entry
+        was created. The values are:
+
+        'other(1)'                   The entry was added by some
+                                     other means.
+
+        'register(2)'                In a server, added based on a
+                                     client registration.
+
+        'resolveAuthoritative(3)'    In a client, added based on
+                                     receiving an Authoritative
+                                     NHRP Resolution Reply.
+
+        'resolveNonauthoritative(4)' In a client, added based on
+                                     receiving a Nonauthoritative
+                                     NHRP Resolution Reply.
+
+        'transit(5)'                 In a transit server, added by
+                                     examining a forwarded NHRP
+                                     packet.
+
+        'administrativelyAdded(6)'   In a client or server,
+                                     manually added by the
+                                     administrator. The
+                                     StorageType of this entry is
+                                     reflected in
+                                     'nhrpCacheStorageType'.
+
+        'atmarp(7)'                  The entry was added due to an
+                                     ATMARP.
+
+        'scsp(8)'                    The entry was added due to
+                                     SCSP.
+
+        When the entry is under creation using the
+        nhrpCacheRowStatus column, the only value that can be
+        specified by the administrator is 'administrativelyAdded'.
+        Attempting to set any other value will cause an
+        'inconsistentValue' error.
+
+        The value cannot be modified once the entry is active."
+    ::= { nhrpCacheEntry 9 }
+
+nhrpCacheState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    incomplete(1),
+                    ackReply(2),
+                    nakReply(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An indication of the state of this entry. The values are:
+
+            'incomplete(1)' The client has sent a NHRP Resolution
+                            Request but has not yet received the
+                            NHRP Resolution Reply.
+
+            'ackReply(2)'   For a client or server, this is a
+                            cached valid mapping.
+
+            'nakReply(3)'   For a client or server, this is a
+                            cached NAK mapping."
+    ::= { nhrpCacheEntry 10 }
+
+nhrpCacheHoldingTimeValid OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "True(1) is returned if the value of
+        'nhrpCacheType' is not
+        'administrativelyAdded'.  Since the
+        value of 'nhrpCacheType' was not
+        configured by a user, the value of
+        'nhrpCacheHoldingTime' is
+        considered valid.  In other words, the value of
+        'nhrpCacheHoldingTime' represents
+        the Holding Time for the cache Entry.
+
+        If 'nhrpCacheType has been configured by a
+        user, (i.e. the value of 'nhrpCacheType' is
+        'administrativelyAdded') then false(2) will be returned.
+        This indicates that the value of
+        'nhrpCacheHoldingTime' is undefined because this row
+        could possibly be backed up in nonvolatile storage."
+    ::= { nhrpCacheEntry 11 }
+
+nhrpCacheHoldingTime OBJECT-TYPE
+    SYNTAX      Unsigned32(0..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of 'nhrpCacheHoldingTimeValid is
+        true(1) then this object represents the number
+        of seconds that the cache entry will remain in this
+        table.  When this value reaches 0 (zero) the row should
+        be deleted.
+
+        If the value of 'nhrpCacheHoldingTimeValid is
+        false(2) then this object is undefined."
+    ::= { nhrpCacheEntry 12 }
+
+nhrpCacheNegotiatedMtu OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum transmission unit (MTU) that was negotiated
+        or registered for this entity. In other words, this is the
+        actual MTU being used."
+    ::= { nhrpCacheEntry 13 }
+
+nhrpCachePreference OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object which reflects the Preference value of the
+        Client Information Entry (CIE).
+
+        Zero or more Client Information Entries (CIEs) may be
+        included in the NHRP Packet.  One of the fields in the
+        CIE is the Preference.  For a complete description of
+        the CIE, refer to Section 5.2.0.1 of  RFC 2332 [17]."
+    REFERENCE
+        "Section 5.2.0.1 Mandatory Part Format, RFC 2332 [17]."
+    ::= { nhrpCacheEntry 14 }
+
+nhrpCacheStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This value only has meaning when the 'nhrpCacheType'
+        has the value of 'administrativelyAdded'.
+
+        When the row is created due to being
+        'administrativelyAdded', this object reflects whether
+        this row is kept in volatile storage
+        and lost upon reboot or if this row is backed up by
+        non-volatile or permanent storage.
+
+        If the value of 'nhrpCacheType' has a value which
+        is not 'administrativelyAdded, then the value of this
+        object is 'other(1)'."
+    DEFVAL      { nonVolatile }
+    ::= { nhrpCacheEntry 15 }
+
+nhrpCacheRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpCacheEntry 16 }
+
+--
+-- The NHRP Purge Request Table
+--
+
+nhrpPurgeReqTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpPurgeReqEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table will track Purge Request Information."
+    ::= { nhrpGeneralObjects 3 }
+
+nhrpPurgeReqEntry OBJECT-TYPE
+    SYNTAX      NhrpPurgeReqEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information regarding a Purge Request."
+    INDEX       {   nhrpPurgeIndex  }
+    ::= { nhrpPurgeReqTable 1 }
+
+NhrpPurgeReqEntry ::= SEQUENCE {
+    nhrpPurgeIndex                        Unsigned32,
+    nhrpPurgeCacheIdentifier              Unsigned32,
+    nhrpPurgePrefixLength                 Integer32,
+    nhrpPurgeRequestID                    Unsigned32,
+    nhrpPurgeReplyExpected                TruthValue,
+    nhrpPurgeRowStatus                    RowStatus
+}
+
+nhrpPurgeIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index for this entry that has local significance
+        within the scope of this table."
+    ::= { nhrpPurgeReqEntry 1 }
+
+nhrpPurgeCacheIdentifier OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object identifies which row in
+        'nhrpCacheTable' is being purged.  This object
+        should have the same value as the 'nhrpCacheIndex'
+        in the 'nhrpCacheTable'."
+    ::= { nhrpPurgeReqEntry 2 }
+
+nhrpPurgePrefixLength OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "In the case of NHRP Purge Requests, this specifies the
+        equivalence class of addresses which match the first
+        'Prefix Length' bit positions of the Client Protocol
+        Address specified in the Client Information Entry (CIE)."
+    ::= { nhrpPurgeReqEntry 3 }
+
+nhrpPurgeRequestID OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Request ID used in the purge request."
+    ::= { nhrpPurgeReqEntry 4 }
+
+nhrpPurgeReplyExpected OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An indication of whether this Purge Request has the
+        'N' Bit cleared (off)."
+    ::= { nhrpPurgeReqEntry 5 }
+
+nhrpPurgeRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpPurgeReqEntry 6 }
+
+--****************************************************************
+-- NHRP Client Objects
+--****************************************************************
+
+nhrpClientObjects OBJECT IDENTIFIER ::= { nhrpObjects 2 }
+
+--
+-- The NHRP Client Table
+--
+
+nhrpClientTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about NHRP clients (NHCs) managed by this
+        agent."
+    ::= { nhrpClientObjects 1 }
+
+nhrpClientEntry OBJECT-TYPE
+    SYNTAX      NhrpClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single NHC."
+    INDEX       { nhrpClientIndex }
+    ::= { nhrpClientTable 1 }
+
+NhrpClientEntry ::= SEQUENCE {
+    nhrpClientIndex                      Unsigned32,
+    nhrpClientInternetworkAddrType       AddressFamilyNumbers,
+    nhrpClientInternetworkAddr           NhrpGenAddr,
+    nhrpClientNbmaAddrType               AddressFamilyNumbers,
+    nhrpClientNbmaAddr                   NhrpGenAddr,
+    nhrpClientNbmaSubaddr                NhrpGenAddr,
+    nhrpClientInitialRequestTimeout      Integer32,
+    nhrpClientRegistrationRequestRetries Integer32,
+    nhrpClientResolutionRequestRetries   Integer32,
+    nhrpClientPurgeRequestRetries        Integer32,
+    nhrpClientDefaultMtu                 Unsigned32,
+    nhrpClientHoldTime                   Unsigned32,
+    nhrpClientRequestID                  Unsigned32,
+    nhrpClientStorageType                StorageType,
+    nhrpClientRowStatus                  RowStatus
+}
+
+nhrpClientIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for the NHRP client that is unique within
+        the scope of this agent.  The 'nhrpNextIndex' value
+        should be consulted (read), prior to creating a row in
+        this table, and the value returned from reading
+        'nhrpNextIndex' should be used as this object's value."
+    ::= { nhrpClientEntry 1 }
+
+nhrpClientInternetworkAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the internetwork layer address of this
+        client. This object indicates how the value of
+        nhrpClientInternetworkAddr is to be interpreted."
+    ::= { nhrpClientEntry 2 }
+
+nhrpClientInternetworkAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork layer address of this
+        client."
+    ::= { nhrpClientEntry 3 }
+
+nhrpClientNbmaAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the NBMA subnetwork address of this client.
+        This object indicates how the values of
+        nhrpClientNbmaAddr and nhrpClientNbmaSubaddr are to be
+        interpreted."
+    ::= { nhrpClientEntry 4 }
+
+nhrpClientNbmaAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA subnetwork address of this client."
+    ::= { nhrpClientEntry 5 }
+
+nhrpClientNbmaSubaddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA subaddress of this client. For NBMA address
+        families without a subaddress concept, this will be a
+        zero-length OCTET STRING."
+    ::= { nhrpClientEntry 6 }
+
+nhrpClientInitialRequestTimeout OBJECT-TYPE
+    SYNTAX      Integer32 (1..900)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of seconds that the client will wait before
+        timing out an NHRP initial request.  This object only has
+        meaning for the initial timeout period."
+    DEFVAL      { 10 }
+    ::= { nhrpClientEntry 7 }
+
+nhrpClientRegistrationRequestRetries OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of times the client will retry the
+        registration request before failure. A value of
+        0 means don't retry. A value of 65535 means
+        retry forever."
+    DEFVAL      { 3 }
+    ::= { nhrpClientEntry 8 }
+
+nhrpClientResolutionRequestRetries OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of times the client will retry the resolution
+        request before failure. A value of 0 means don't retry.
+        A value of 65535 means retry forever."
+    DEFVAL      { 3 }
+    ::= { nhrpClientEntry 9 }
+
+nhrpClientPurgeRequestRetries OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of times the client will retry a purge request
+        before failure. A value of 0 means don't retry. A value of
+        65535 means retry forever."
+    DEFVAL      { 3 }
+    ::= { nhrpClientEntry 10 }
+
+nhrpClientDefaultMtu OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The default maximum transmission unit (MTU) of the
+        LIS/LAG which this client should use. This object
+        will be initialized by the agent to the default MTU
+        of the LIS/LAG (which is 9180) unless a different MTU
+        value is specified during creation of this Client."
+    REFERENCE
+        "RFC 2225 [25], Classical IP and ARP over ATM, Section 7,
+        DEFAULT VALUE FOR IP MTU OVER ATM AAL5."
+    DEFVAL      { 9180 }
+    ::= { nhrpClientEntry 11 }
+
+nhrpClientHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32(0..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The hold time the client will register."
+    DEFVAL      { 900 }
+    ::= { nhrpClientEntry 12 }
+
+nhrpClientRequestID OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Request ID used to register this client with its
+        server. According to Section 5.2.3 of the NHRP
+        Specification, RFC 2332 [17], the Request ID must
+        be kept in non-volatile storage, so that if an NHC
+        crashes and  re-initializes, it will use a different
+
+        Request ID during the registration process
+        when reregistering with the same NHS."
+    REFERENCE
+        "Section 5.2.3 NHRP Registration Request, RFC 2332 [17]."
+    ::= { nhrpClientEntry 13 }
+
+nhrpClientStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this row is kept in
+        volatile storage and lost upon a Client crash or
+        reboot situation, or if this row is backed up by
+        nonvolatile or permanent storage."
+    DEFVAL      { nonVolatile }
+    ::= { nhrpClientEntry 14 }
+
+nhrpClientRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpClientEntry 15 }
+
+--
+-- The NHRP Client Registration Table
+--
+
+nhrpClientRegistrationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpClientRegistrationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Registration Request Information that
+        needs to be maintained by the NHCs (clients)."
+    REFERENCE
+        "Section 5.2.3 NHRP Registration Request, RFC 2332 [17]."
+    ::= { nhrpClientObjects 2 }
+
+nhrpClientRegistrationEntry OBJECT-TYPE
+    SYNTAX      NhrpClientRegistrationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An NHC needs to maintain registration request information
+        between the NHC and the NHS.  An entry in this table
+        represents information for a single registration request."
+    INDEX       { nhrpClientIndex,
+                  nhrpClientRegIndex
+                }
+    ::= { nhrpClientRegistrationTable 1 }
+
+NhrpClientRegistrationEntry ::= SEQUENCE {
+    nhrpClientRegIndex          Unsigned32,
+    nhrpClientRegUniqueness     INTEGER,
+    nhrpClientRegState          INTEGER,
+    nhrpClientRegRowStatus      RowStatus
+}
+
+nhrpClientRegIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for this entry such that it
+        identifies a specific Registration Request from
+        the NHC represented by the nhrpClientIndex."
+    ::= { nhrpClientRegistrationEntry 1 }
+
+nhrpClientRegUniqueness OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    requestUnique(1),
+                    requestNotUnique(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Uniqueness indicator for this Registration Request.
+        If this object has the value of requestUnique(1), then
+        the Uniqueness bit is set in the the NHRP Registration
+        Request represented by this row.  The value cannot
+        be changed once the row is created."
+    ::= { nhrpClientRegistrationEntry 2 }
+
+nhrpClientRegState  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    registering(2),
+                    ackRegisterReply(3),
+                    nakRegisterReply(4)
+
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The registration state of this client. The values are:
+            'other(1)'             The state of the registration
+                                   request is not one of
+                                   'registering',
+                                   'ackRegisterReply' or
+                                   'nakRegisterReply'.
+
+            'registering(2)'        A registration request has
+                                    been issued and a registration
+                                    reply is expected.
+
+            'ackRegisterReply(3)'   A positive registration reply
+                                    has been received.
+
+            'nakRegisterReply(4)'   The client has received a
+                                    negative registration
+                                    reply (NAK)."
+    ::= { nhrpClientRegistrationEntry 3 }
+
+nhrpClientRegRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpClientRegistrationEntry 4 }
+
+--
+-- The NHRP Client->Server Table
+--
+
+nhrpClientNhsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpClientNhsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of NHSes that are available for use by this NHC
+        (client). By default, the agent will add an entry to this
+        table that corresponds to the client's default router."
+    ::= { nhrpClientObjects 3 }
+
+nhrpClientNhsEntry OBJECT-TYPE
+    SYNTAX      NhrpClientNhsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An NHS that may be used by an NHC."
+    INDEX       { nhrpClientIndex, nhrpClientNhsIndex }
+    ::= { nhrpClientNhsTable 1 }
+
+NhrpClientNhsEntry ::= SEQUENCE {
+    nhrpClientNhsIndex                  Unsigned32,
+    nhrpClientNhsInternetworkAddrType   AddressFamilyNumbers,
+    nhrpClientNhsInternetworkAddr       NhrpGenAddr,
+    nhrpClientNhsNbmaAddrType           AddressFamilyNumbers,
+    nhrpClientNhsNbmaAddr               NhrpGenAddr,
+    nhrpClientNhsNbmaSubaddr            NhrpGenAddr,
+    nhrpClientNhsInUse                  TruthValue,
+    nhrpClientNhsRowStatus              RowStatus
+}
+
+nhrpClientNhsIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for an NHS available to an NHC."
+    ::= { nhrpClientNhsEntry 1 }
+
+nhrpClientNhsInternetworkAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the internetwork layer address of the
+        NHRP server represented in this entry. This object
+        indicates how the value of
+        nhrpClientNhsInternetworkAddr is to be interpreted."
+    ::= { nhrpClientNhsEntry 2 }
+
+nhrpClientNhsInternetworkAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the destination internetwork layer
+        address of the NHRP server represented by this
+
+        entry.  If this value is not known, this will be
+        a zero-length OCTET STRING."
+    ::= { nhrpClientNhsEntry 3 }
+
+nhrpClientNhsNbmaAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the NBMA subnetwork address of the NHRP
+        Server represented by this entry. This object indicates
+        how the values of nhrpClientNhsNbmaAddr and
+        nhrpClientNhsNbmaSubaddr are to be interpreted."
+    ::= { nhrpClientNhsEntry 4 }
+
+nhrpClientNhsNbmaAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA subnetwork address of the NHS. The type of
+        the address is indicated by the corresponding value of
+        nhrpClientNhsNbmaAddrType."
+    ::= { nhrpClientNhsEntry 5 }
+
+nhrpClientNhsNbmaSubaddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA subaddress of the NHS. For NMBA address
+        families that do not have the concept of subaddress,
+             this will be a zero-length OCTET STRING."
+    ::= { nhrpClientNhsEntry 6 }
+
+nhrpClientNhsInUse OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An indication of whether this NHS is in use by the NHC."
+    ::= { nhrpClientNhsEntry 7 }
+
+nhrpClientNhsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpClientNhsEntry 8 }
+
+--
+-- The NHRP Client StatisticsTable
+--
+
+nhrpClientStatTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpClientStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains statistics collected by NHRP
+        clients."
+    ::= { nhrpClientObjects 4 }
+
+nhrpClientStatEntry OBJECT-TYPE
+    SYNTAX      NhrpClientStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Statistics collected by a NHRP client."
+    INDEX       { nhrpClientIndex }
+    ::= { nhrpClientStatTable 1 }
+
+NhrpClientStatEntry ::= SEQUENCE {
+    nhrpClientStatTxResolveReq                    Counter32,
+    nhrpClientStatRxResolveReplyAck               Counter32,
+    nhrpClientStatRxResolveReplyNakProhibited     Counter32,
+    nhrpClientStatRxResolveReplyNakInsufResources Counter32,
+    nhrpClientStatRxResolveReplyNakNoBinding      Counter32,
+    nhrpClientStatRxResolveReplyNakNotUnique      Counter32,
+    nhrpClientStatTxRegisterReq                   Counter32,
+    nhrpClientStatRxRegisterAck                   Counter32,
+    nhrpClientStatRxRegisterNakProhibited         Counter32,
+    nhrpClientStatRxRegisterNakInsufResources     Counter32,
+    nhrpClientStatRxRegisterNakAlreadyReg         Counter32,
+    nhrpClientStatRxPurgeReq                      Counter32,
+    nhrpClientStatTxPurgeReq                      Counter32,
+    nhrpClientStatRxPurgeReply                    Counter32,
+    nhrpClientStatTxPurgeReply                    Counter32,
+    nhrpClientStatTxErrorIndication               Counter32,
+    nhrpClientStatRxErrUnrecognizedExtension      Counter32,
+    nhrpClientStatRxErrLoopDetected               Counter32,
+    nhrpClientStatRxErrProtoAddrUnreachable       Counter32,
+    nhrpClientStatRxErrProtoError                 Counter32,
+    nhrpClientStatRxErrSduSizeExceeded            Counter32,
+    nhrpClientStatRxErrInvalidExtension           Counter32,
+    nhrpClientStatRxErrAuthenticationFailure      Counter32,
+    nhrpClientStatRxErrHopCountExceeded           Counter32,
+    nhrpClientStatDiscontinuityTime               TimeStamp
+}
+
+nhrpClientStatTxResolveReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Resolution Requests transmitted
+        by this client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 1 }
+
+nhrpClientStatRxResolveReplyAck OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of positively acknowledged NHRP Resolution
+        Replies received by this client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 2 }
+
+nhrpClientStatRxResolveReplyNakProhibited OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies received
+        by this client that contained the code indicating
+        'Administratively Prohibited'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 3 }
+
+nhrpClientStatRxResolveReplyNakInsufResources OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies received
+        by this client that contained the code indicating
+        'Insufficient Resources'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 4 }
+
+nhrpClientStatRxResolveReplyNakNoBinding OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies received
+        by this client that contained the code indicating
+        'No Internetworking Layer Address to NBMA Address
+        Binding Exists'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 5 }
+
+nhrpClientStatRxResolveReplyNakNotUnique OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies received
+        by this client that contained the code indicating
+        'Binding Exists But Is Not Unique'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 6 }
+
+nhrpClientStatTxRegisterReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Registration Requests transmitted
+        by this client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 7 }
+
+nhrpClientStatRxRegisterAck OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of positively acknowledged NHRP Registration
+        Replies received by this client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 8 }
+
+nhrpClientStatRxRegisterNakProhibited OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Registration Replies received
+        by this client that contained the code indicating
+        'Administratively Prohibited'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 9 }
+
+nhrpClientStatRxRegisterNakInsufResources OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Registration Replies received
+        by this client that contained the code indicating
+        'Insufficient Resources'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 10 }
+
+nhrpClientStatRxRegisterNakAlreadyReg OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Registration Replies received
+        by this client that contained the code indicating 'Unique
+        Internetworking Layer Address Already Registered'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 11 }
+
+nhrpClientStatRxPurgeReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Requests received by this
+        client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 12 }
+
+nhrpClientStatTxPurgeReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Requests transmitted by this
+        client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 13 }
+
+nhrpClientStatRxPurgeReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Replies received by this
+        client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 14 }
+
+nhrpClientStatTxPurgeReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Replies transmitted by this
+        client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    ::= { nhrpClientStatEntry 15 }
+
+nhrpClientStatTxErrorIndication OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets transmitted
+        by this client.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 16 }
+
+nhrpClientStatRxErrUnrecognizedExtension OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code
+        'Unrecognized Extension'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 17 }
+
+nhrpClientStatRxErrLoopDetected OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'NHRP Loop Detected'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 18 }
+
+nhrpClientStatRxErrProtoAddrUnreachable OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'Protocol Address
+        Unreachable'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 19 }
+
+nhrpClientStatRxErrProtoError OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'Protocol Error'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 20 }
+
+nhrpClientStatRxErrSduSizeExceeded OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'NHRP SDU Size
+
+        Exceeded'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 21 }
+
+nhrpClientStatRxErrInvalidExtension OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'Invalid Extension'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 22 }
+
+nhrpClientStatRxErrAuthenticationFailure OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'Authentication
+        Failure'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 23 }
+
+nhrpClientStatRxErrHopCountExceeded OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this client with the error code 'Hop Count Exceeded'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Client re-initialization and at
+        other times as indicated by the value of
+        nhrpClientStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpClientStatEntry 24 }
+
+nhrpClientStatDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at
+        which any one or more of this Client's counters
+        suffered a discontinuity.  If no such discontinuities
+        have occurred since the last re-initialization of the
+        local management subsystem or the NHRP Client
+        re-initialization associated with this entry, then
+        this object contains a zero value."
+    REFERENCE
+        "RFC 2233 [18]."
+    ::= { nhrpClientStatEntry 25 }
+
+--****************************************************************
+-- NHRP Server Objects
+--****************************************************************
+
+nhrpServerObjects OBJECT IDENTIFIER ::= { nhrpObjects 3 }
+
+--
+-- The NHRP Next Hop Server Table
+--
+
+nhrpServerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpServerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains information for a set of NHSes
+        associated with this agent."
+    ::= { nhrpServerObjects 1 }
+
+nhrpServerEntry OBJECT-TYPE
+    SYNTAX      NhrpServerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single NHS."
+    INDEX       { nhrpServerIndex }
+    ::= { nhrpServerTable 1 }
+
+NhrpServerEntry ::= SEQUENCE {
+    nhrpServerIndex                 Unsigned32,
+    nhrpServerInternetworkAddrType  AddressFamilyNumbers,
+    nhrpServerInternetworkAddr      NhrpGenAddr,
+    nhrpServerNbmaAddrType          AddressFamilyNumbers,
+    nhrpServerNbmaAddr              NhrpGenAddr,
+    nhrpServerNbmaSubaddr           NhrpGenAddr,
+    nhrpServerStorageType           StorageType,
+    nhrpServerRowStatus             RowStatus
+}
+
+nhrpServerIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for the server that is unique within the
+        scope of this agent."
+    ::= { nhrpServerEntry 1 }
+
+nhrpServerInternetworkAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the internetwork layer address of this
+        server. This object is used to interpret the value of
+        nhrpServerInternetworkAddr."
+    ::= { nhrpServerEntry 2 }
+
+nhrpServerInternetworkAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork layer address of this
+        server."
+    ::= { nhrpServerEntry 3 }
+
+nhrpServerNbmaAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the NBMA subnetwork address of this server.
+        This object is used to interpret the value of
+        nhrpServerNbmaAddr."
+    ::= { nhrpServerEntry 4 }
+
+nhrpServerNbmaAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the NBMA subnetwork address of this
+        server."
+    ::= { nhrpServerEntry 5 }
+
+nhrpServerNbmaSubaddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the NBMA subaddress of this server.
+        For NBMA address families without a subaddress
+        concept, this will be a zero-length OCTET STRING."
+    ::= { nhrpServerEntry 6 }
+
+nhrpServerStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this row is kept in
+        volatile storage and lost upon a Server crash or
+        reboot situation, or if this row is backed up by
+        nonvolatile or permanent storage."
+    DEFVAL      { nonVolatile }
+    ::= { nhrpServerEntry 7 }
+
+nhrpServerRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpServerEntry 8 }
+
+--
+-- The Server Cache Table
+--
+nhrpServerCacheTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpServerCacheEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table extends the nhrpCacheTable for
+        NHSes.  If the nhrpCacheTable has a row added due to
+        an NHS or based on information regarding an NHS then
+        a row is also added in this table.
+
+        The rows in this table will be created when rows in
+        the nhrpCacheTable are created.  However, there may
+        be rows created in the nhrpCacheTable which do not
+        have corresponding rows in this table.  For example,
+        if the nhrpCacheTable has a row added due to a Next
+        Hop Client which is co-resident on the same device
+        as the NHS, a row will not be added to this table."
+    ::= { nhrpServerObjects 2 }
+
+nhrpServerCacheEntry OBJECT-TYPE
+    SYNTAX      NhrpServerCacheEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Additional information kept by a NHS for a relevant
+        Next Hop Resolution Cache entry."
+    INDEX       {
+                    nhrpCacheInternetworkAddrType,
+                    nhrpCacheInternetworkAddr,
+                    ifIndex,
+                    nhrpCacheIndex
+                }
+    ::= { nhrpServerCacheTable 1 }
+
+NhrpServerCacheEntry ::= SEQUENCE {
+    nhrpServerCacheAuthoritative   TruthValue,
+    nhrpServerCacheUniqueness      TruthValue
+}
+
+nhrpServerCacheAuthoritative OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An indication of whether this cache entry is
+        authoritative, which means the entry was added because
+        of a direct registration request with this server or
+        by Server Cache Synchronization Protocol (SCSP) from
+        an authoritative source."
+    ::= { nhrpServerCacheEntry 1 }
+
+nhrpServerCacheUniqueness OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Uniqueness indicator for this cache
+        entry used in duplicate address detection. This value
+        cannot be changed after the entry is active."
+    ::= { nhrpServerCacheEntry 2 }
+
+--
+-- The NHRP Server->Client Table
+--
+
+nhrpServerNhcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpServerNhcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of NHCs that are available for use by this NHS
+        (Server)."
+    REFERENCE
+        "Section 4 Configuration (Next Hop Servers),
+        RFC 2332 [17]."
+    ::= { nhrpServerObjects 3 }
+
+nhrpServerNhcEntry OBJECT-TYPE
+    SYNTAX      NhrpServerNhcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An NHC that may be used by an NHS."
+    INDEX       { nhrpServerIndex, nhrpServerNhcIndex }
+    ::= { nhrpServerNhcTable 1 }
+
+NhrpServerNhcEntry ::= SEQUENCE {
+    nhrpServerNhcIndex                  Unsigned32,
+    nhrpServerNhcPrefixLength           Integer32,
+    nhrpServerNhcInternetworkAddrType   AddressFamilyNumbers,
+    nhrpServerNhcInternetworkAddr       NhrpGenAddr,
+    nhrpServerNhcNbmaAddrType           AddressFamilyNumbers,
+    nhrpServerNhcNbmaAddr               NhrpGenAddr,
+    nhrpServerNhcNbmaSubaddr            NhrpGenAddr,
+    nhrpServerNhcInUse                  TruthValue,
+    nhrpServerNhcRowStatus              RowStatus
+}
+
+nhrpServerNhcIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for an NHC available to an NHS."
+    ::= { nhrpServerNhcEntry 1 }
+
+nhrpServerNhcPrefixLength OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of bits that define the internetwork
+        layer prefix associated with the
+        nhrpServerNhcInternetworkAddr."
+    ::= { nhrpServerNhcEntry 2 }
+
+nhrpServerNhcInternetworkAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the internetwork layer address of the
+        NHRP Client represented in this entry. This object
+        indicates how the value of nhrpServerNhcInternetworkAddr
+        is to be interpreted."
+    ::= { nhrpServerNhcEntry 3 }
+
+nhrpServerNhcInternetworkAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork layer address of
+        the NHRP Client represented by this entry.  If this
+        value is not known, this will be a zero-length
+        OCTET STRING."
+    ::= { nhrpServerNhcEntry 4 }
+
+nhrpServerNhcNbmaAddrType OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the NBMA subnetwork address of the NHRP
+        Client represented by this entry. This object indicates
+        how the values of nhrpServerNhcNbmaAddr and
+        nhrpServerNhcNbmaSubaddr are to be interpreted."
+    ::= { nhrpServerNhcEntry 5 }
+
+nhrpServerNhcNbmaAddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA subnetwork address of the NHC. The type of the
+        address is indicated by the corresponding value of
+        nhrpServerNbmaAddrType."
+    ::= { nhrpServerNhcEntry 6 }
+
+nhrpServerNhcNbmaSubaddr OBJECT-TYPE
+    SYNTAX      NhrpGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The NBMA subaddress of the NHC. For NMBA address familes
+        that do not have the concept of subaddress, this will
+        be a zero-length OCTET STRING."
+    ::= { nhrpServerNhcEntry 7 }
+
+nhrpServerNhcInUse OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An indication of whether this NHC is in use by the NHS."
+    ::= { nhrpServerNhcEntry 8 }
+
+nhrpServerNhcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to be
+        created and deleted using the RowStatus convention."
+    ::= { nhrpServerNhcEntry 9 }
+
+--
+-- The Next Hop Server Statistics Table
+--
+
+nhrpServerStatTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NhrpServerStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Statistics collected by Next Hop Servers."
+    ::= { nhrpServerObjects 4 }
+
+nhrpServerStatEntry OBJECT-TYPE
+    SYNTAX      NhrpServerStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Statistics for a particular NHS. The statistics are
+        broken into received (Rx), transmitted (Tx)
+        and forwarded (Fw).  Forwarded (Fw) would be done
+        by a transit NHS."
+    INDEX       { nhrpServerIndex }
+    ::= { nhrpServerStatTable 1 }
+
+NhrpServerStatEntry ::= SEQUENCE {
+    nhrpServerStatRxResolveReq                    Counter32,
+    nhrpServerStatTxResolveReplyAck               Counter32,
+    nhrpServerStatTxResolveReplyNakProhibited     Counter32,
+    nhrpServerStatTxResolveReplyNakInsufResources Counter32,
+    nhrpServerStatTxResolveReplyNakNoBinding      Counter32,
+    nhrpServerStatTxResolveReplyNakNotUnique      Counter32,
+    nhrpServerStatRxRegisterReq                   Counter32,
+    nhrpServerStatTxRegisterAck                   Counter32,
+    nhrpServerStatTxRegisterNakProhibited         Counter32,
+    nhrpServerStatTxRegisterNakInsufResources     Counter32,
+    nhrpServerStatTxRegisterNakAlreadyReg         Counter32,
+    nhrpServerStatRxPurgeReq                      Counter32,
+    nhrpServerStatTxPurgeReq                      Counter32,
+    nhrpServerStatRxPurgeReply                    Counter32,
+    nhrpServerStatTxPurgeReply                    Counter32,
+-- Error Indications
+    nhrpServerStatRxErrUnrecognizedExtension      Counter32,
+    nhrpServerStatRxErrLoopDetected               Counter32,
+    nhrpServerStatRxErrProtoAddrUnreachable       Counter32,
+    nhrpServerStatRxErrProtoError                 Counter32,
+    nhrpServerStatRxErrSduSizeExceeded            Counter32,
+    nhrpServerStatRxErrInvalidExtension           Counter32,
+    nhrpServerStatRxErrInvalidResReplyReceived    Counter32,
+    nhrpServerStatRxErrAuthenticationFailure      Counter32,
+    nhrpServerStatRxErrHopCountExceeded           Counter32,
+    nhrpServerStatTxErrUnrecognizedExtension      Counter32,
+    nhrpServerStatTxErrLoopDetected               Counter32,
+    nhrpServerStatTxErrProtoAddrUnreachable       Counter32,
+    nhrpServerStatTxErrProtoError                 Counter32,
+    nhrpServerStatTxErrSduSizeExceeded            Counter32,
+    nhrpServerStatTxErrInvalidExtension           Counter32,
+    nhrpServerStatTxErrAuthenticationFailure      Counter32,
+    nhrpServerStatTxErrHopCountExceeded           Counter32,
+-- Transit NHS statistics
+    nhrpServerStatFwResolveReq                    Counter32,
+    nhrpServerStatFwResolveReply                  Counter32,
+    nhrpServerStatFwRegisterReq                   Counter32,
+    nhrpServerStatFwRegisterReply                 Counter32,
+    nhrpServerStatFwPurgeReq                      Counter32,
+    nhrpServerStatFwPurgeReply                    Counter32,
+    nhrpServerStatFwErrorIndication               Counter32,
+    nhrpServerStatDiscontinuityTime               TimeStamp
+
+}
+
+nhrpServerStatRxResolveReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Resolution Requests received by this
+        server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 1 }
+
+nhrpServerStatTxResolveReplyAck OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of positively acknowledged NHRP
+        Resolution Replies transmitted by this server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 2 }
+
+nhrpServerStatTxResolveReplyNakProhibited OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies
+        transmitted by this server with the code
+        'Administratively Prohibited'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 3 }
+
+nhrpServerStatTxResolveReplyNakInsufResources OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies
+        transmitted by this server with the code
+        'Insufficient Resources'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 4 }
+
+nhrpServerStatTxResolveReplyNakNoBinding OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies
+        transmitted by this server with the code
+        'No Internetworking Layer Address to NBMA
+        Address Binding Exists'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 5 }
+
+nhrpServerStatTxResolveReplyNakNotUnique OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Resolution Replies
+        transmitted by this server with the code
+        'Binding Exists But Is Not Unique'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 6 }
+
+nhrpServerStatRxRegisterReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Registration Requests received
+        by this server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 7 }
+
+nhrpServerStatTxRegisterAck OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of positively acknowledged NHRP Registration
+        Replies transmitted by this server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 8 }
+
+nhrpServerStatTxRegisterNakProhibited OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Registration Replies
+        transmitted by this server with the code
+        'Administratively Prohibited'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 9 }
+
+nhrpServerStatTxRegisterNakInsufResources OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Registration Replies
+        transmitted by this server with the code
+        'Insufficient Resources'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 10 }
+
+nhrpServerStatTxRegisterNakAlreadyReg OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NAKed NHRP Registration Replies
+        transmitted by this server with the code
+        'Unique Internetworking Layer Address Already
+        Registered'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 11 }
+
+nhrpServerStatRxPurgeReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Requests received by
+        this server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 12 }
+
+nhrpServerStatTxPurgeReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Requests transmitted by this
+        server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 13 }
+
+nhrpServerStatRxPurgeReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Replies received by this
+        server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 14 }
+
+nhrpServerStatTxPurgeReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Replies transmitted by
+        this server.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 15 }
+
+nhrpServerStatRxErrUnrecognizedExtension OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code
+
+        'Unrecognized Extension'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 16 }
+
+nhrpServerStatRxErrLoopDetected OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code 'NHRP Loop Detected'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 17 }
+
+nhrpServerStatRxErrProtoAddrUnreachable OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code 'Protocol Address
+        Unreachable'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 18 }
+
+nhrpServerStatRxErrProtoError OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code 'Protocol Error'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 19 }
+
+nhrpServerStatRxErrSduSizeExceeded OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code 'NHRP SDU Size
+        Exceeded'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 20 }
+
+nhrpServerStatRxErrInvalidExtension OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code 'Invalid Extension'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 21 }
+
+nhrpServerStatRxErrInvalidResReplyReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets received
+        by this server with the error code 'Invalid Resolution
+        Reply Received'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 22 }
+
+nhrpServerStatRxErrAuthenticationFailure OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        received by this server with the error code
+        'Authentication Failure'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 23 }
+
+nhrpServerStatRxErrHopCountExceeded OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        received by this server with the error code
+        'Hop Count Exceeded'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 24 }
+
+nhrpServerStatTxErrUnrecognizedExtension OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error code
+        'Unrecognized Extension'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 25 }
+
+nhrpServerStatTxErrLoopDetected OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error code
+        'NHRP Loop Detected'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 26 }
+
+nhrpServerStatTxErrProtoAddrUnreachable OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error code
+        'Protocol Address Unreachable'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 27 }
+
+nhrpServerStatTxErrProtoError OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error
+        code 'Protocol Error'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 28 }
+
+nhrpServerStatTxErrSduSizeExceeded OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error code
+        'NHRP SDU Size Exceeded'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 29 }
+
+nhrpServerStatTxErrInvalidExtension OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error code
+
+        'Invalid Extension'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 30 }
+
+nhrpServerStatTxErrAuthenticationFailure OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error code
+        'Authentication Failure'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 31 }
+
+nhrpServerStatTxErrHopCountExceeded OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets
+        transmitted by this server with the error
+        code 'Hop Count Exceeded'.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    REFERENCE
+        "Section 5.2.7 NHRP Error Indication, RFC 2332 [17]."
+    ::= { nhrpServerStatEntry 32 }
+
+nhrpServerStatFwResolveReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Resolution Requests
+        forwarded by this server acting as a transit NHS.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 33 }
+
+nhrpServerStatFwResolveReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Resolution Replies forwarded
+        by this server acting as a transit NHS.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 34 }
+
+nhrpServerStatFwRegisterReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Registration Requests forwarded
+        by this server acting as a transit NHS.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 35 }
+
+nhrpServerStatFwRegisterReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Registration Replies forwarded
+        by this server acting as a transit NHS.
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 36 }
+
+nhrpServerStatFwPurgeReq OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Requests forwarded
+        by this server acting as a transit NHS.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 37 }
+
+nhrpServerStatFwPurgeReply OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Purge Replies forwarded by this
+        server acting as a transit NHS.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 38 }
+
+nhrpServerStatFwErrorIndication OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of NHRP Error Indication packets forwarded
+        by this server acting as a transit NHS.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, at
+        NHRP Server re-initialization and at
+        other times as indicated by the value of
+        nhrpServerStatDiscontinuityTime."
+    ::= { nhrpServerStatEntry 39 }
+
+nhrpServerStatDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at
+        which any one or more of this Server's counters
+        suffered a discontinuity.  If no such discontinuities
+        have occurred since the last re-initialization of the
+
+        local management subsystem or the NHRP Server
+        re-initialization associated with this entry, then
+        this object contains a zero value."
+    REFERENCE
+        "RFC 2233 [18]."
+    ::= { nhrpServerStatEntry 40 }
+
+--****************************************************************
+-- Module Compliance Statement
+--****************************************************************
+
+nhrpConformance OBJECT IDENTIFIER ::= { nhrpMIB 2 }
+
+nhrpCompliances
+    OBJECT IDENTIFIER ::= { nhrpConformance 1 }
+
+nhrpGroups
+    OBJECT IDENTIFIER ::= { nhrpConformance 2 }
+
+nhrpModuleCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The compliance statement for the NHRP MIB."
+    MODULE -- this module
+        MANDATORY-GROUPS    { nhrpGeneralGroup }
+
+        GROUP nhrpClientGroup
+        DESCRIPTION
+            "This group must be supported only by stations that
+            are NHRP clients."
+
+        GROUP nhrpServerGroup
+        DESCRIPTION
+            "This group must be supported only by stations that
+            are NHRP servers."
+    ::= { nhrpCompliances 1 }
+
+nhrpGeneralGroup OBJECT-GROUP
+    OBJECTS {
+
+        nhrpNextIndex,
+        nhrpCachePrefixLength,
+        nhrpCacheNextHopInternetworkAddr,
+        nhrpCacheNbmaAddrType,
+        nhrpCacheNbmaAddr,
+        nhrpCacheNbmaSubaddr,
+        nhrpCacheType,
+        nhrpCacheState,
+        nhrpCacheHoldingTimeValid,
+        nhrpCacheHoldingTime,
+        nhrpCacheNegotiatedMtu,
+        nhrpCachePreference,
+        nhrpCacheStorageType,
+        nhrpCacheRowStatus,
+        nhrpPurgeCacheIdentifier,
+        nhrpPurgePrefixLength,
+        nhrpPurgeRequestID,
+        nhrpPurgeReplyExpected,
+        nhrpPurgeRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to both NHRP clients and NHRP
+        servers."
+    ::= { nhrpGroups 1 }
+
+nhrpClientGroup OBJECT-GROUP
+    OBJECTS {
+        nhrpClientInternetworkAddrType,
+        nhrpClientInternetworkAddr,
+        nhrpClientNbmaAddrType,
+        nhrpClientNbmaAddr,
+        nhrpClientNbmaSubaddr,
+        nhrpClientInitialRequestTimeout,
+        nhrpClientRegistrationRequestRetries,
+        nhrpClientResolutionRequestRetries,
+        nhrpClientPurgeRequestRetries,
+        nhrpClientDefaultMtu,
+        nhrpClientHoldTime,
+        nhrpClientRequestID,
+        nhrpClientStorageType,
+        nhrpClientRowStatus,
+        nhrpClientRegUniqueness,
+        nhrpClientRegState,
+        nhrpClientRegRowStatus,
+        nhrpClientNhsInternetworkAddrType,
+        nhrpClientNhsInternetworkAddr,
+        nhrpClientNhsNbmaAddrType,
+        nhrpClientNhsNbmaAddr,
+        nhrpClientNhsNbmaSubaddr,
+        nhrpClientNhsInUse,
+        nhrpClientNhsRowStatus,
+        nhrpClientStatTxResolveReq,
+        nhrpClientStatRxResolveReplyAck,
+        nhrpClientStatRxResolveReplyNakProhibited,
+        nhrpClientStatRxResolveReplyNakInsufResources,
+        nhrpClientStatRxResolveReplyNakNoBinding,
+        nhrpClientStatRxResolveReplyNakNotUnique,
+        nhrpClientStatTxRegisterReq,
+        nhrpClientStatRxRegisterAck,
+        nhrpClientStatRxRegisterNakProhibited,
+        nhrpClientStatRxRegisterNakInsufResources,
+        nhrpClientStatRxRegisterNakAlreadyReg,
+        nhrpClientStatRxPurgeReq,
+        nhrpClientStatTxPurgeReq,
+        nhrpClientStatRxPurgeReply,
+        nhrpClientStatTxPurgeReply,
+        nhrpClientStatTxErrorIndication,
+        nhrpClientStatRxErrUnrecognizedExtension,
+        nhrpClientStatRxErrLoopDetected,
+        nhrpClientStatRxErrProtoAddrUnreachable,
+        nhrpClientStatRxErrProtoError,
+        nhrpClientStatRxErrSduSizeExceeded,
+        nhrpClientStatRxErrInvalidExtension,
+        nhrpClientStatRxErrAuthenticationFailure,
+        nhrpClientStatRxErrHopCountExceeded,
+        nhrpClientStatDiscontinuityTime
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply only to NHRP clients."
+    ::= { nhrpGroups 2 }
+
+nhrpServerGroup OBJECT-GROUP
+    OBJECTS {
+        nhrpServerInternetworkAddrType,
+        nhrpServerInternetworkAddr,
+        nhrpServerNbmaAddrType,
+        nhrpServerNbmaAddr,
+        nhrpServerNbmaSubaddr,
+        nhrpServerStorageType,
+        nhrpServerRowStatus,
+        nhrpServerCacheAuthoritative,
+        nhrpServerCacheUniqueness,
+        nhrpServerNhcPrefixLength,
+        nhrpServerNhcInternetworkAddrType,
+        nhrpServerNhcInternetworkAddr,
+        nhrpServerNhcNbmaAddrType,
+        nhrpServerNhcNbmaAddr,
+        nhrpServerNhcNbmaSubaddr,
+        nhrpServerNhcInUse,
+        nhrpServerNhcRowStatus,
+        nhrpServerStatRxResolveReq,
+        nhrpServerStatTxResolveReplyAck,
+        nhrpServerStatTxResolveReplyNakProhibited,
+        nhrpServerStatTxResolveReplyNakInsufResources,
+        nhrpServerStatTxResolveReplyNakNoBinding,
+        nhrpServerStatTxResolveReplyNakNotUnique,
+        nhrpServerStatRxRegisterReq,
+        nhrpServerStatTxRegisterAck,
+        nhrpServerStatTxRegisterNakProhibited,
+        nhrpServerStatTxRegisterNakInsufResources,
+        nhrpServerStatTxRegisterNakAlreadyReg,
+        nhrpServerStatRxPurgeReq,
+        nhrpServerStatTxPurgeReq,
+        nhrpServerStatRxPurgeReply,
+        nhrpServerStatTxPurgeReply,
+        nhrpServerStatRxErrUnrecognizedExtension,
+        nhrpServerStatRxErrLoopDetected,
+        nhrpServerStatRxErrProtoAddrUnreachable,
+        nhrpServerStatRxErrProtoError,
+        nhrpServerStatRxErrSduSizeExceeded,
+        nhrpServerStatRxErrInvalidExtension,
+        nhrpServerStatRxErrInvalidResReplyReceived,
+        nhrpServerStatRxErrAuthenticationFailure,
+        nhrpServerStatRxErrHopCountExceeded,
+        nhrpServerStatTxErrUnrecognizedExtension,
+        nhrpServerStatTxErrLoopDetected,
+        nhrpServerStatTxErrProtoAddrUnreachable,
+        nhrpServerStatTxErrProtoError,
+        nhrpServerStatTxErrSduSizeExceeded,
+        nhrpServerStatTxErrInvalidExtension,
+        nhrpServerStatTxErrAuthenticationFailure,
+        nhrpServerStatTxErrHopCountExceeded,
+        nhrpServerStatFwResolveReq,
+        nhrpServerStatFwResolveReply,
+        nhrpServerStatFwRegisterReq,
+        nhrpServerStatFwRegisterReply,
+        nhrpServerStatFwPurgeReq,
+        nhrpServerStatFwPurgeReply,
+        nhrpServerStatFwErrorIndication,
+        nhrpServerStatDiscontinuityTime
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply only to NHRP servers."
+    ::= { nhrpGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/NOTIFICATION-LOG-MIB.mib b/snmp_builder/mibs/NOTIFICATION-LOG-MIB.mib
new file mode 100644
index 0000000..c7da934
--- /dev/null
+++ b/snmp_builder/mibs/NOTIFICATION-LOG-MIB.mib
@@ -0,0 +1,753 @@
+NOTIFICATION-LOG-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, Unsigned32,
+    TimeTicks, Counter32, Counter64,
+    IpAddress, Opaque, mib-2       FROM SNMPv2-SMI
+    TimeStamp, DateAndTime,
+    StorageType, RowStatus,
+    TAddress, TDomain              FROM SNMPv2-TC
+    SnmpAdminString, SnmpEngineID  FROM SNMP-FRAMEWORK-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP     FROM SNMPv2-CONF;
+
+notificationLogMIB MODULE-IDENTITY
+    LAST-UPDATED "200011270000Z"            -- 27 November 2000
+    ORGANIZATION "IETF Distributed Management Working Group"
+    CONTACT-INFO "Ramanathan Kavasseri
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive,
+                  San Jose CA 95134-1706.
+                  Phone: +1 408 527 2446
+                  Email: ramk@cisco.com"
+    DESCRIPTION
+     "The MIB module for logging SNMP Notifications, that is, Traps
+
+     and Informs."
+-- Revision History
+
+       REVISION     "200011270000Z"            -- 27 November 2000
+       DESCRIPTION  "This is the initial version of this MIB.
+               Published as RFC 3014"
+    ::= { mib-2 92 }
+
+notificationLogMIBObjects OBJECT IDENTIFIER ::= { notificationLogMIB 1 }
+
+nlmConfig OBJECT IDENTIFIER ::= { notificationLogMIBObjects 1 }
+nlmStats  OBJECT IDENTIFIER ::= { notificationLogMIBObjects 2 }
+nlmLog         OBJECT IDENTIFIER ::= { notificationLogMIBObjects 3 }
+
+--
+-- Configuration Section
+--
+
+nlmConfigGlobalEntryLimit OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+     "The maximum number of notification entries that may be held
+     in nlmLogTable for all nlmLogNames added together.  A particular
+     setting does not guarantee that much data can be held.
+
+     If an application changes the limit while there are
+     Notifications in the log, the oldest Notifications MUST be
+     discarded to bring the log down to the new limit - thus the
+     value of nlmConfigGlobalEntryLimit MUST take precedence over
+     the values of nlmConfigGlobalAgeOut and nlmConfigLogEntryLimit,
+     even if the Notification being discarded has been present for
+     fewer minutes than the value of nlmConfigGlobalAgeOut, or if
+     the named log has fewer entries than that specified in
+     nlmConfigLogEntryLimit.
+
+     A value of 0 means no limit.
+
+     Please be aware that contention between multiple managers
+     trying to set this object to different values MAY affect the
+     reliability and completeness of data seen by each manager."
+    DEFVAL { 0 }
+    ::= { nlmConfig 1 }
+
+nlmConfigGlobalAgeOut OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "minutes"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+     "The number of minutes a Notification SHOULD be kept in a log
+     before it is automatically removed.
+
+     If an application changes the value of nlmConfigGlobalAgeOut,
+     Notifications older than the new time MAY be discarded to meet the
+     new time.
+
+     A value of 0 means no age out.
+
+     Please be aware that contention between multiple managers
+     trying to set this object to different values MAY affect the
+     reliability and completeness of data seen by each manager."
+    DEFVAL { 1440 }  -- 24 hours
+    ::= { nlmConfig 2 }
+
+--
+-- Basic Log Configuration Table
+--
+
+nlmConfigLogTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlmConfigLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of logging control entries."
+    ::= { nlmConfig 3 }
+
+nlmConfigLogEntry OBJECT-TYPE
+    SYNTAX      NlmConfigLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A logging control entry.  Depending on the entry's storage type
+     entries may be supplied by the system or created and deleted by
+     applications using nlmConfigLogEntryStatus."
+    INDEX      { nlmLogName }
+    ::= { nlmConfigLogTable 1 }
+
+NlmConfigLogEntry ::= SEQUENCE {
+    nlmLogName           SnmpAdminString,
+    nlmConfigLogFilterName    SnmpAdminString,
+    nlmConfigLogEntryLimit    Unsigned32,
+    nlmConfigLogAdminStatus   INTEGER,
+    nlmConfigLogOperStatus    INTEGER,
+    nlmConfigLogStorageType   StorageType,
+    nlmConfigLogEntryStatus   RowStatus
+    }
+
+nlmLogName OBJECT-TYPE
+    SYNTAX     SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "The name of the log.
+
+     An implementation may allow multiple named logs, up to some
+     implementation-specific limit (which may be none).  A
+     zero-length log name is reserved for creation and deletion by
+     the managed system, and MUST be used as the default log name by
+     systems that do not support named logs."
+    ::= { nlmConfigLogEntry 1 }
+
+nlmConfigLogFilterName OBJECT-TYPE
+    SYNTAX     SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+     "A value of snmpNotifyFilterProfileName as used as an index
+     into the snmpNotifyFilterTable in the SNMP Notification MIB,
+     specifying the locally or remotely originated Notifications
+     to be filtered out and not logged in this log.
+
+     A zero-length value or a name that does not identify an
+     existing entry in snmpNotifyFilterTable indicate no
+     Notifications are to be logged in this log."
+    DEFVAL { ''H }
+    ::= { nlmConfigLogEntry 2 }
+
+nlmConfigLogEntryLimit OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+     "The maximum number of notification entries that can be held in
+     nlmLogTable for this named log.  A particular setting does not
+     guarantee that that much data can be held.
+
+     If an application changes the limit while there are
+     Notifications in the log, the oldest Notifications are discarded
+     to bring the log down to the new limit.
+
+     A value of 0 indicates no limit.
+
+     Please be aware that contention between multiple managers
+     trying to set this object to different values MAY affect the
+     reliability and completeness of data seen by each manager."
+    DEFVAL { 0 }
+    ::= { nlmConfigLogEntry 3 }
+
+nlmConfigLogAdminStatus OBJECT-TYPE
+    SYNTAX     INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+     "Control to enable or disable the log without otherwise
+     disturbing the log's entry.
+
+     Please be aware that contention between multiple managers
+     trying to set this object to different values MAY affect the
+     reliability and completeness of data seen by each manager."
+    DEFVAL { enabled }
+    ::= { nlmConfigLogEntry 4 }
+
+nlmConfigLogOperStatus OBJECT-TYPE
+    SYNTAX     INTEGER { disabled(1), operational(2), noFilter(3) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "The operational status of this log:
+
+          disabled  administratively disabled
+
+          operational    administratively enabled and working
+
+          noFilter  administratively enabled but either
+                    nlmConfigLogFilterName is zero length
+                    or does not name an existing entry in
+                    snmpNotifyFilterTable"
+    ::= { nlmConfigLogEntry 5 }
+
+nlmConfigLogStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+     "The storage type of this conceptual row."
+    ::= { nlmConfigLogEntry 6 }
+
+nlmConfigLogEntryStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+     "Control for creating and deleting entries.  Entries may be
+     modified while active.
+
+     For non-null-named logs, the managed system records the security
+     credentials from the request that sets nlmConfigLogStatus
+     to 'active' and uses that identity to apply access control to
+     the objects in the Notification to decide if that Notification
+     may be logged."
+    ::= { nlmConfigLogEntry 7 }
+
+--
+-- Statistics Section
+--
+
+nlmStatsGlobalNotificationsLogged OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "notifications"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of Notifications put into the nlmLogTable.  This
+     counts a Notification once for each log entry, so a Notification
+      put into multiple logs is counted multiple times."
+    ::= { nlmStats 1 }
+
+nlmStatsGlobalNotificationsBumped OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "notifications"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of log entries discarded to make room for a new entry
+     due to lack of resources or the value of nlmConfigGlobalEntryLimit
+     or nlmConfigLogEntryLimit.  This does not include entries discarded
+     due to the value of nlmConfigGlobalAgeOut."
+    ::= { nlmStats 2 }
+
+--
+-- Log Statistics Table
+--
+
+nlmStatsLogTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlmStatsLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of Notification log statistics entries."
+    ::= { nlmStats 3 }
+
+nlmStatsLogEntry OBJECT-TYPE
+    SYNTAX      NlmStatsLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A Notification log statistics entry."
+    AUGMENTS { nlmConfigLogEntry }
+    ::= { nlmStatsLogTable 1 }
+
+NlmStatsLogEntry ::= SEQUENCE {
+    nlmStatsLogNotificationsLogged Counter32,
+    nlmStatsLogNotificationsBumped Counter32
+}
+
+nlmStatsLogNotificationsLogged OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "notifications"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of Notifications put in this named log."
+    ::= { nlmStatsLogEntry 1 }
+
+nlmStatsLogNotificationsBumped OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "notifications"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The number of log entries discarded from this named log to make
+     room for a new entry due to lack of resources or the value of
+     nlmConfigGlobalEntryLimit or nlmConfigLogEntryLimit.  This does not
+     include entries discarded due to the value of
+     nlmConfigGlobalAgeOut."
+    ::= { nlmStatsLogEntry 2 }
+
+--
+-- Log Section
+--
+
+--
+-- Log Table
+
+--
+
+nlmLogTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlmLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of Notification log entries.
+
+     It is an implementation-specific matter whether entries in this
+     table are preserved across initializations of the management
+     system.  In general one would expect that they are not.
+
+     Note that keeping entries across initializations of the
+     management system leads to some confusion with counters and
+     TimeStamps, since both of those are based on sysUpTime, which
+     resets on management initialization.  In this situation,
+     counters apply only after the reset and nlmLogTime for entries
+     made before the reset MUST be set to 0."
+    ::= { nlmLog 1 }
+
+nlmLogEntry OBJECT-TYPE
+    SYNTAX      NlmLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A Notification log entry.
+
+     Entries appear in this table when Notifications occur and pass
+     filtering by nlmConfigLogFilterName and access control.  They are
+     removed to make way for new entries due to lack of resources or
+     the values of nlmConfigGlobalEntryLimit, nlmConfigGlobalAgeOut, or
+     nlmConfigLogEntryLimit.
+
+     If adding an entry would exceed nlmConfigGlobalEntryLimit or system
+     resources in general, the oldest entry in any log SHOULD be removed
+     to make room for the new one.
+
+     If adding an entry would exceed nlmConfigLogEntryLimit the oldest
+     entry in that log SHOULD be removed to make room for the new one.
+
+     Before the managed system puts a locally-generated Notification
+     into a non-null-named log it assures that the creator of the log
+     has access to the information in the Notification.  If not it
+     does not log that Notification in that log."
+    INDEX       { nlmLogName, nlmLogIndex }
+    ::= { nlmLogTable 1 }
+
+NlmLogEntry ::= SEQUENCE {
+    nlmLogIndex                Unsigned32,
+    nlmLogTime                 TimeStamp,
+    nlmLogDateAndTime          DateAndTime,
+    nlmLogEngineID             SnmpEngineID,
+    nlmLogEngineTAddress       TAddress,
+    nlmLogEngineTDomain        TDomain,
+    nlmLogContextEngineID      SnmpEngineID,
+    nlmLogContextName          SnmpAdminString,
+    nlmLogNotificationID       OBJECT IDENTIFIER
+}
+
+nlmLogIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "A monotonically increasing integer for the sole purpose of
+     indexing entries within the named log.  When it reaches the
+     maximum value, an extremely unlikely event, the agent wraps the
+     value back to 1."
+    ::= { nlmLogEntry 1 }
+
+nlmLogTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value of sysUpTime when the entry was placed in the log. If
+     the entry occurred before the most recent management system
+     initialization this object value MUST be set to zero."
+    ::= { nlmLogEntry 2 }
+
+nlmLogDateAndTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The local date and time when the entry was logged, instantiated
+     only by systems that have date and time capability."
+    ::= { nlmLogEntry 3 }
+
+nlmLogEngineID OBJECT-TYPE
+    SYNTAX      SnmpEngineID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The identification of the SNMP engine at which the Notification
+
+     originated.
+
+     If the log can contain Notifications from only one engine
+     or the Trap is in SNMPv1 format, this object is a zero-length
+     string."
+    ::= { nlmLogEntry 4 }
+
+nlmLogEngineTAddress OBJECT-TYPE
+    SYNTAX      TAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The transport service address of the SNMP engine from which the
+     Notification was received, formatted according to the corresponding
+     value of nlmLogEngineTDomain. This is used to identify the source
+     of an SNMPv1 trap, since an nlmLogEngineId cannot be extracted
+     from the SNMPv1 trap pdu.
+
+     This object MUST always be instantiated, even if the log
+     can contain Notifications from only one engine.
+
+     Please be aware that the nlmLogEngineTAddress may not uniquely
+     identify the SNMP engine from which the Notification was received.
+     For example, if an SNMP engine uses DHCP or NAT to obtain
+     ip addresses, the address it uses may be shared with other
+     network devices, and hence will not uniquely identify the
+     SNMP engine."
+    ::= { nlmLogEntry 5 }
+
+nlmLogEngineTDomain OBJECT-TYPE
+    SYNTAX      TDomain
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "Indicates the kind of transport service by which a Notification
+     was received from an SNMP engine. nlmLogEngineTAddress contains
+     the transport service address of the SNMP engine from which
+     this Notification was received.
+
+     Possible values for this object are presently found in the
+     Transport Mappings for SNMPv2 document (RFC 1906 [8])."
+    ::= { nlmLogEntry 6 }
+
+nlmLogContextEngineID OBJECT-TYPE
+    SYNTAX      SnmpEngineID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "If the Notification was received in a protocol which has a
+      contextEngineID element like SNMPv3, this object has that value.
+      Otherwise its value is a zero-length string."
+     ::= { nlmLogEntry 7 }
+
+nlmLogContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The name of the SNMP MIB context from which the Notification came.
+     For SNMPv1 Traps this is the community string from the Trap."
+    ::= { nlmLogEntry 8 }
+
+nlmLogNotificationID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The NOTIFICATION-TYPE object identifier of the Notification that
+     occurred."
+    ::= { nlmLogEntry 9 }
+
+--
+-- Log Variable Table
+--
+
+nlmLogVariableTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlmLogVariableEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A table of variables to go with Notification log entries."
+    ::= { nlmLog 2 }
+
+nlmLogVariableEntry OBJECT-TYPE
+    SYNTAX      NlmLogVariableEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "A Notification log entry variable.
+
+     Entries appear in this table when there are variables in
+     the varbind list of a Notification in nlmLogTable."
+    INDEX       { nlmLogName, nlmLogIndex, nlmLogVariableIndex }
+    ::= { nlmLogVariableTable 1 }
+
+NlmLogVariableEntry ::= SEQUENCE {
+
+    nlmLogVariableIndex              Unsigned32,
+    nlmLogVariableID                 OBJECT IDENTIFIER,
+    nlmLogVariableValueType          INTEGER,
+    nlmLogVariableCounter32Val       Counter32,
+    nlmLogVariableUnsigned32Val      Unsigned32,
+    nlmLogVariableTimeTicksVal       TimeTicks,
+    nlmLogVariableInteger32Val       Integer32,
+    nlmLogVariableOctetStringVal     OCTET STRING,
+    nlmLogVariableIpAddressVal       IpAddress,
+    nlmLogVariableOidVal             OBJECT IDENTIFIER,
+    nlmLogVariableCounter64Val       Counter64,
+    nlmLogVariableOpaqueVal          Opaque
+}
+
+nlmLogVariableIndex OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "A monotonically increasing integer, starting at 1 for a given
+     nlmLogIndex, for indexing variables within the logged
+     Notification."
+    ::= { nlmLogVariableEntry 1 }
+
+nlmLogVariableID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "The variable's object identifier."
+    ::= { nlmLogVariableEntry 2 }
+
+nlmLogVariableValueType OBJECT-TYPE
+    SYNTAX      INTEGER { counter32(1), unsigned32(2), timeTicks(3),
+                 integer32(4), ipAddress(5), octetString(6),
+                 objectId(7), counter64(8), opaque(9) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The type of the value.  One and only one of the value
+     objects that follow must be instantiated, based on this type."
+    ::= { nlmLogVariableEntry 3 }
+
+nlmLogVariableCounter32Val OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'counter32'."
+    ::= { nlmLogVariableEntry 4 }
+
+nlmLogVariableUnsigned32Val OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'unsigned32'."
+    ::= { nlmLogVariableEntry 5 }
+
+nlmLogVariableTimeTicksVal OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'timeTicks'."
+    ::= { nlmLogVariableEntry 6 }
+
+nlmLogVariableInteger32Val OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'integer32'."
+    ::= { nlmLogVariableEntry 7 }
+
+nlmLogVariableOctetStringVal OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'octetString'."
+    ::= { nlmLogVariableEntry 8 }
+
+nlmLogVariableIpAddressVal OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'ipAddress'.
+     Although this seems to be unfriendly for IPv6, we
+     have to recognize that there are a number of older
+     MIBs that do contain an IPv4 format address, known
+     as IpAddress.
+
+     IPv6 addresses are represented using TAddress or
+     InetAddress, and so the underlying datatype is
+
+     OCTET STRING, and their value would be stored in
+     the nlmLogVariableOctetStringVal column."
+    ::= { nlmLogVariableEntry 9 }
+
+nlmLogVariableOidVal OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'objectId'."
+    ::= { nlmLogVariableEntry 10 }
+
+nlmLogVariableCounter64Val OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'counter64'."
+    ::= { nlmLogVariableEntry 11 }
+
+nlmLogVariableOpaqueVal OBJECT-TYPE
+    SYNTAX      Opaque
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+     "The value when nlmLogVariableType is 'opaque'."
+    ::= { nlmLogVariableEntry 12 }
+
+--
+-- Conformance
+--
+
+notificationLogMIBConformance OBJECT IDENTIFIER ::=
+    { notificationLogMIB 3 }
+notificationLogMIBCompliances OBJECT IDENTIFIER ::=
+    { notificationLogMIBConformance 1 }
+notificationLogMIBGroups      OBJECT IDENTIFIER ::=
+    { notificationLogMIBConformance 2 }
+
+-- Compliance
+
+notificationLogMIBCompliance MODULE-COMPLIANCE
+     STATUS current
+     DESCRIPTION
+          "The compliance statement for entities which implement
+          the Notification Log MIB."
+     MODULE    -- this module
+
+          MANDATORY-GROUPS {
+               notificationLogConfigGroup,
+               notificationLogStatsGroup,
+               notificationLogLogGroup
+          }
+
+     OBJECT nlmConfigGlobalEntryLimit
+         SYNTAX Unsigned32 (0..4294967295)
+         MIN-ACCESS read-only
+         DESCRIPTION
+          "Implementations may choose a limit and not allow it to be
+          changed or may enforce an upper or lower bound on the
+          limit."
+
+     OBJECT nlmConfigLogEntryLimit
+         SYNTAX Unsigned32 (0..4294967295)
+         MIN-ACCESS read-only
+         DESCRIPTION
+          "Implementations may choose a limit and not allow it to be
+          changed or may enforce an upper or lower bound on the
+          limit."
+
+     OBJECT nlmConfigLogEntryStatus
+         MIN-ACCESS read-only
+         DESCRIPTION
+          "Implementations may disallow the creation of named logs."
+
+     GROUP notificationLogDateGroup
+         DESCRIPTION
+          "This group is mandatory on systems that keep wall clock
+          date and time and should not be implemented on systems that
+          do not have a wall clock date."
+     ::= { notificationLogMIBCompliances 1 }
+
+-- Units of Conformance
+
+notificationLogConfigGroup OBJECT-GROUP
+     OBJECTS {
+          nlmConfigGlobalEntryLimit,
+          nlmConfigGlobalAgeOut,
+          nlmConfigLogFilterName,
+          nlmConfigLogEntryLimit,
+          nlmConfigLogAdminStatus,
+          nlmConfigLogOperStatus,
+          nlmConfigLogStorageType,
+          nlmConfigLogEntryStatus
+     }
+     STATUS current
+     DESCRIPTION
+          "Notification log configuration management."
+     ::= { notificationLogMIBGroups 1 }
+
+notificationLogStatsGroup OBJECT-GROUP
+     OBJECTS {
+          nlmStatsGlobalNotificationsLogged,
+          nlmStatsGlobalNotificationsBumped,
+          nlmStatsLogNotificationsLogged,
+          nlmStatsLogNotificationsBumped
+     }
+     STATUS current
+     DESCRIPTION
+          "Notification log statistics."
+     ::= { notificationLogMIBGroups 2 }
+
+notificationLogLogGroup OBJECT-GROUP
+     OBJECTS {
+          nlmLogTime,
+          nlmLogEngineID,
+          nlmLogEngineTAddress,
+          nlmLogEngineTDomain,
+          nlmLogContextEngineID,
+          nlmLogContextName,
+          nlmLogNotificationID,
+          nlmLogVariableID,
+          nlmLogVariableValueType,
+          nlmLogVariableCounter32Val,
+          nlmLogVariableUnsigned32Val,
+          nlmLogVariableTimeTicksVal,
+          nlmLogVariableInteger32Val,
+          nlmLogVariableOctetStringVal,
+          nlmLogVariableIpAddressVal,
+          nlmLogVariableOidVal,
+          nlmLogVariableCounter64Val,
+          nlmLogVariableOpaqueVal
+     }
+     STATUS current
+     DESCRIPTION
+          "Notification log data."
+     ::= { notificationLogMIBGroups 3 }
+
+notificationLogDateGroup OBJECT-GROUP
+     OBJECTS {
+          nlmLogDateAndTime
+     }
+     STATUS current
+     DESCRIPTION
+          "Conditionally mandatory notification log data.
+          This group is mandatory on systems that keep wall
+          clock date and time and should not be implemented
+          on systems that do not have a wall clock date."
+     ::= { notificationLogMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/OPT-IF-MIB.mib b/snmp_builder/mibs/OPT-IF-MIB.mib
new file mode 100644
index 0000000..892b4e1
--- /dev/null
+++ b/snmp_builder/mibs/OPT-IF-MIB.mib
@@ -0,0 +1,6616 @@
+OPT-IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32,
+      Unsigned32, transmission
+          FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowPointer, RowStatus, TruthValue
+          FROM SNMPv2-TC
+    SnmpAdminString
+          FROM SNMP-FRAMEWORK-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP
+          FROM SNMPv2-CONF
+    ifIndex
+          FROM IF-MIB;
+
+--  This is the MIB module for the OTN Interface objects.
+
+optIfMibModule MODULE-IDENTITY
+    LAST-UPDATED "200308130000Z"
+    ORGANIZATION "IETF AToM MIB Working Group"
+    CONTACT-INFO
+       "WG charter:
+          http://www.ietf.org/html.charters/atommib-charter.html
+
+        Mailing Lists:
+           General Discussion: atommib@research.telcordia.com
+           To Subscribe: atommib-request@research.telcordia.com
+
+        Editor: Hing-Kam Lam
+        Postal: Lucent Technologies, Room 4C-616
+                101 Crawfords Corner Road
+                Holmdel, NJ 07733
+           Tel: +1 732 949 8338
+         Email: hklam@lucent.com"
+    DESCRIPTION
+       "The MIB module to describe pre-OTN and OTN interfaces.
+
+        Copyright (C) The Internet Society (2003).  This version
+        of this MIB module is part of RFC 3591;  see the RFC
+        itself for full legal notices."
+    REVISION  "200308130000Z"
+    DESCRIPTION
+       "Initial version, published as RFC 3591."
+    ::={ transmission 133 }
+
+-- textual conventions
+
+OptIfAcTI ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "The trace identifier (TI) accepted at the receiver."
+  SYNTAX  OCTET STRING (SIZE(64))
+
+OptIfBitRateK ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Indicates the index 'k' that is used to
+     represent a supported bit rate and the different
+     versions of OPUk, ODUk and OTUk.
+     Allowed values of k are defined in ITU-T G.709.
+     Currently allowed values in G.709 are:
+        k=1 represents an approximate bit rate of 2.5 Gbit/s,
+        k=2 represents an approximate bit rate of 10 Gbit/s,
+        k=3 represents an approximate bit rate of 40 Gbit/s."
+  SYNTAX  Integer32
+
+OptIfDEGM ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a Degraded Signal
+     defect (dDEG).  A dDEG shall be declared if OptIfDEGM
+     consecutive bad PM Seconds are detected."
+  SYNTAX  Unsigned32 (2..10)
+
+OptIfDEGThr ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a performance
+     monitoring (PM) Second to be bad.  A PM Second is declared bad if
+     the percentage of detected errored blocks in that second is
+     greater than or equal to OptIfDEGThr."
+  SYNTAX  Unsigned32 (1..100)
+
+OptIfDirectionality ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of an entity."
+  SYNTAX  INTEGER {
+    sink(1),
+    source(2),
+    bidirectional(3)
+    }
+
+OptIfSinkOrSource ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of an entity
+     that is allowed only to be a source or sink."
+  SYNTAX  INTEGER {
+    sink(1),
+    source(2)
+    }
+
+OptIfExDAPI ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "The Destination Access Point Identifier (DAPI)
+     expected by the receiver."
+  SYNTAX  OCTET STRING (SIZE(16))
+
+OptIfExSAPI ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "The Source Access Point Identifier (SAPI)
+     expected by the receiver."
+  SYNTAX  OCTET STRING (SIZE(16))
+
+OptIfIntervalNumber ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies a 15-minute interval.  The interval
+     identified by 1 is the most recently completed interval, and
+
+     the interval identified by n is the interval immediately
+     preceding the one identified by n-1."
+  SYNTAX  Unsigned32 (1..96)
+
+OptIfTIMDetMode ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function."
+  SYNTAX  INTEGER {
+    off(1),
+    dapi(2),
+    sapi(3),
+    both(4)
+    }
+
+OptIfTxTI ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "The trace identifier (TI) transmitted."
+  SYNTAX  OCTET STRING (SIZE(64))
+
+-- object groups
+
+optIfObjects OBJECT IDENTIFIER ::= { optIfMibModule 1 }
+optIfConfs OBJECT IDENTIFIER ::= { optIfMibModule 2 }
+
+optIfOTMn OBJECT IDENTIFIER ::= { optIfObjects 1 }
+optIfPerfMon OBJECT IDENTIFIER ::= { optIfObjects 2 }
+optIfOTSn OBJECT IDENTIFIER ::= { optIfObjects 3 }
+optIfOMSn OBJECT IDENTIFIER ::= { optIfObjects 4 }
+optIfOChGroup OBJECT IDENTIFIER ::= { optIfObjects 5 }
+optIfOCh OBJECT IDENTIFIER ::= { optIfObjects 6 }
+
+optIfOTUk OBJECT IDENTIFIER ::= { optIfObjects 7 }
+optIfODUk OBJECT IDENTIFIER ::= { optIfObjects 8 }
+optIfODUkT OBJECT IDENTIFIER ::= { optIfObjects 9 }
+
+optIfGroups OBJECT IDENTIFIER ::= { optIfConfs 1 }
+optIfCompl OBJECT IDENTIFIER ::= { optIfConfs 2 }
+
+-- the optIfOTMn group
+-- This group defines the OTM structure information of an
+-- optical interface.
+
+-- OTMn Table
+
+optIfOTMnTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTMnEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTMn structure information."
+  ::= { optIfOTMn 1 }
+
+optIfOTMnEntry OBJECT-TYPE
+  SYNTAX  OptIfOTMnEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains the OTMn structure
+     information of an optical interface."
+  INDEX  { ifIndex }
+  ::= { optIfOTMnTable 1 }
+
+OptIfOTMnEntry ::=
+  SEQUENCE {
+    optIfOTMnOrder         Unsigned32,
+    optIfOTMnReduced       TruthValue,
+    optIfOTMnBitRates      BITS,
+    optIfOTMnInterfaceType SnmpAdminString,
+    optIfOTMnTcmMax        Unsigned32,
+    optIfOTMnOpticalReach  INTEGER
+    }
+
+optIfOTMnOrder OBJECT-TYPE
+  SYNTAX  Unsigned32 (1..900)
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This object indicates the order of the OTM, which
+     represents the maximum number of wavelengths that can be
+     supported at the bit rate(s) supported on the interface."
+  ::= { optIfOTMnEntry 1 }
+
+optIfOTMnReduced OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This object indicates whether a reduced or full
+     functionality is supported at the interface.  A value of
+     true means reduced.  A value of false means full."
+  ::= { optIfOTMnEntry 2 }
+
+optIfOTMnBitRates OBJECT-TYPE
+  SYNTAX  BITS { bitRateK1(0), bitRateK2(1), bitRateK3(2) }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This attribute is a bit map representing the bit
+     rate or set of bit rates supported on the interface.
+     The meaning of each bit position is as follows:
+       bitRateK1(0) is set if the 2.5 Gbit/s rate is supported
+       bitRateK2(1) is set if the 10 Gbit/s rate is supported
+       bitRateK3(2) is set if the 40 Gbit/s rate is supported
+     Note that each bit position corresponds to one possible
+     value of the type OptIfBitRateK.
+     The default value of this attribute is system specific."
+  ::= { optIfOTMnEntry 3 }
+
+optIfOTMnInterfaceType OBJECT-TYPE
+  SYNTAX  SnmpAdminString
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This object identifies the type of interface.  The value of
+     this attribute will affect the behavior of the OTM with
+     respect to presence/absence of OTM Overhead Signal (OOS)
+     processing and TCM activation.  For an IrDI interface,
+     there is no OOS processing and TCM activation is limited
+     to n levels as specified by a TCM level threshold.
+
+     This object contains two fields that are separated by
+     whitespace.  The possible values are:
+          field 1: one of the 4-character ASCII strings
+                    'IrDI' or 'IaDI'
+          field 2: free-form text consisting of printable
+                   UTF-8 encoded characters
+
+     Note that field 2 is optional.  If it is not present then there
+     is no requirement for trailing whitespace after field 1.
+
+     The default values are as follows:
+          field 1:  'IaDI'
+          field 2: an empty string."
+  ::= { optIfOTMnEntry 4 }
+
+optIfOTMnTcmMax OBJECT-TYPE
+  SYNTAX  Unsigned32 (0..6)
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "This object identifies the maximum number of TCM
+     levels allowed for any Optical Channel contained
+     in this OTM.  A new TCM activation will be rejected
+     if the requested level is greater than the threshold.
+     If InterfaceType object specifies a type of 'IaDI'
+     for this OTM, then this attribute is irrelevant.
+
+     Possible values:  unsigned integers in the range
+                       from 0 to 6 inclusive.
+     Default value:    3."
+  ::= { optIfOTMnEntry 5 }
+
+optIfOTMnOpticalReach OBJECT-TYPE
+  SYNTAX  INTEGER { intraOffice(1), shortHaul(2), longHaul(3),
+                    veryLongHaul(4), ultraLongHaul(5) }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This object indicates the length the optical signal
+     may travel before requiring termination or regeneration.
+     The meaning of the enumeration are:
+       intraOffice(1)  - intra-office (as defined in ITU-T G.957)
+       shortHaul(2)    - short haul (as defined in ITU-T G.957)
+       longHaul(3)     - long haul (as defined in ITU-T G.957)
+       veryLongHaul(4) - very long haul (as defined in ITU-T G.691)
+       ultraLongHaul(5)- ultra long haul (as defined in ITU-T G.691)"
+  ::= { optIfOTMnEntry 6 }
+
+-- the optIfPerfMon group
+-- This group defines performance monitoring objects for all
+-- layers.
+
+-- PM interval table
+
+optIfPerfMonIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfPerfMonIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of 15-minute performance monitoring interval
+     information."
+  ::= { optIfPerfMon 1 }
+
+optIfPerfMonIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfPerfMonIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains 15-minute performance
+     monitoring interval information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfPerfMonIntervalTable 1 }
+
+OptIfPerfMonIntervalEntry ::=
+  SEQUENCE {
+    optIfPerfMonCurrentTimeElapsed   Gauge32,
+    optIfPerfMonCurDayTimeElapsed    Gauge32,
+    optIfPerfMonIntervalNumIntervals         Unsigned32,
+    optIfPerfMonIntervalNumInvalidIntervals  Unsigned32
+    }
+
+optIfPerfMonCurrentTimeElapsed OBJECT-TYPE
+  SYNTAX  Gauge32 (0..900)
+  UNITS  "seconds"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Number of seconds elapsed in the current 15-minute
+     performance monitoring interval.
+     If, for some reason, such as an adjustment in the NE's
+     time-of-day clock, the number of seconds elapsed exceeds
+     the maximum value, then the maximum value will be returned."
+  ::= { optIfPerfMonIntervalEntry 1 }
+
+optIfPerfMonCurDayTimeElapsed OBJECT-TYPE
+  SYNTAX  Gauge32 (0..86400)
+  UNITS  "seconds"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Number of seconds elapsed in the current 24-hour interval
+     performance monitoring period.
+     If, for some reason, such as an adjustment in the NE's
+     time-of-day clock, the number of seconds elapsed exceeds
+     the maximum value, then the maximum value will be returned."
+  ::= { optIfPerfMonIntervalEntry 2 }
+
+optIfPerfMonIntervalNumIntervals OBJECT-TYPE
+  SYNTAX  Unsigned32 (0..96)
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The number of 15-minute intervals for which performance
+     monitoring data is available.  The number is the same for all
+     the associated sub layers of the interface.
+
+     An optical interface must be capable of supporting at least
+     n intervals, where n is defined as follows:
+         The minimum value of n is 4.
+         The default of n is 32.
+         The maximum value of n is 96.
+
+     The value of this object will be n unless performance
+     monitoring was (re-)started for the interface within the last
+     (n*15) minutes, in which case the value will be the number of
+     complete 15-minute intervals since measurement was
+     (re-)started."
+  ::= { optIfPerfMonIntervalEntry 3 }
+
+optIfPerfMonIntervalNumInvalidIntervals OBJECT-TYPE
+  SYNTAX  Unsigned32 (0..96)
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The number of intervals in the range from 0 to
+     optIfPerfMonIntervalNumIntervals for which no performance
+     monitoring data is available and/or the data is invalid."
+  ::= { optIfPerfMonIntervalEntry 4 }
+
+-- the optIfOTSn group
+-- This group handles the configuration and performance
+-- monitoring objects for OTS layers.
+
+-- OTSn config table
+
+optIfOTSnConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn configuration information."
+  ::= { optIfOTSn 1 }
+
+optIfOTSnConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnConfigTable 1 }
+
+OptIfOTSnConfigEntry ::=
+
+  SEQUENCE {
+    optIfOTSnDirectionality              OptIfDirectionality,
+    optIfOTSnAprStatus                   SnmpAdminString,
+    optIfOTSnAprControl                  SnmpAdminString,
+    optIfOTSnTraceIdentifierTransmitted  OptIfTxTI,
+    optIfOTSnDAPIExpected                OptIfExDAPI,
+    optIfOTSnSAPIExpected                OptIfExSAPI,
+    optIfOTSnTraceIdentifierAccepted     OptIfAcTI,
+    optIfOTSnTIMDetMode                  OptIfTIMDetMode,
+    optIfOTSnTIMActEnabled               TruthValue,
+    optIfOTSnCurrentStatus               BITS
+    }
+
+optIfOTSnDirectionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity."
+  ::= { optIfOTSnConfigEntry 1 }
+
+optIfOTSnAprStatus OBJECT-TYPE
+  SYNTAX  SnmpAdminString
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This attribute indicates the status of the Automatic
+     Power Reduction (APR) function of the entity.  Valid
+     values are 'on' and 'off'."
+  ::= { optIfOTSnConfigEntry 2 }
+
+optIfOTSnAprControl OBJECT-TYPE
+  SYNTAX  SnmpAdminString
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "This object is a UTF-8 encoded string that specifies Automatic
+     Power Reduction (APR) control actions requested of this entity
+     (when written) and that returns the current APR control state
+     of this entity (when read).  The values are implementation-defined.
+     Any implementation that instantiates this object must document the
+     set of values that it allows to be written, the set of values
+     that it will return, and what each of those values means."
+  ::= { optIfOTSnConfigEntry 3 }
+
+optIfOTSnTraceIdentifierTransmitted OBJECT-TYPE
+  SYNTAX  OptIfTxTI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The trace identifier transmitted.
+     This object is applicable when optIfOTSnDirectionality has the
+     value source(2) or bidirectional(3).
+     This object does not apply to reduced-capability systems (i.e.,
+     those for which optIfOTMnReduced has the value true(1)) or
+     at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+     has the value 'IrDI').
+     If no value is ever set by a management entity for the object
+     optIfOTSnTraceIdentifierTransmitted, system-specific default
+     value will be used.  Any implementation that instantiates this
+     object must document the system-specific default value or how it
+     is derived."
+  ::= { optIfOTSnConfigEntry 4 }
+
+optIfOTSnDAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExDAPI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The DAPI expected by the receiver.
+     This object is applicable when optIfOTSnDirectionality has the
+     value sink(1) or bidirectional(3).  It has no effect if
+     optIfOTSnTIMDetMode has the value off(1) or sapi(3).
+     This object does not apply to reduced-capability systems (i.e.,
+     those for which optIfOTMnReduced has the value true(1)) or
+     at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+     has the value 'IrDI')."
+  ::= { optIfOTSnConfigEntry 5 }
+
+optIfOTSnSAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExSAPI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The SAPI expected by the receiver.
+     This object is applicable when optIfOTSnDirectionality has the
+     value sink(1) or bidirectional(3).  It has no effect if
+     optIfOTSnTIMDetMode has the value off(1) or dapi(2).
+     This object does not apply to reduced-capability systems (i.e.,
+     those for which optIfOTMnReduced has the value true(1)) or
+     at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+     has the value 'IrDI')."
+  ::= { optIfOTSnConfigEntry 6 }
+
+optIfOTSnTraceIdentifierAccepted OBJECT-TYPE
+  SYNTAX  OptIfAcTI
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The actual trace identifier received.
+     This object is applicable when optIfOTSnDirectionality has the
+     value sink(1) or bidirectional(3).  Its value is unspecified
+     if optIfOTSnCurrentStatus has either or both of the
+     losO(5) and los(6) bits set.
+     This object does not apply to reduced-capability systems (i.e.,
+     those for which optIfOTMnReduced has the value true(1)) or
+     at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+     has the value 'IrDI')."
+  ::= { optIfOTSnConfigEntry 7 }
+
+optIfOTSnTIMDetMode OBJECT-TYPE
+  SYNTAX  OptIfTIMDetMode
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function.  This object is applicable
+     when optIfOTSnDirectionality has the value sink(1)
+     or bidirectional(3).  The default value is off(1).
+     This object does not apply to reduced-capability systems (i.e.,
+     those for which optIfOTMnReduced has the value true(1)) or
+     at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+     has the value 'IrDI').
+     The default value of this object is off(1)."
+  ::= { optIfOTSnConfigEntry 8 }
+
+optIfOTSnTIMActEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the Trace Identifier Mismatch (TIM)
+     Consequent Action function is enabled.  This object
+     is applicable when optIfOTSnDirectionality has the
+     value sink(1) or bidirectional(3).  It has no effect
+     when the value of optIfOTSnTIMDetMode is off(1).
+     This object does not apply to reduced-capability systems (i.e.,
+     those for which optIfOTMnReduced has the value true(1)) or
+     at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+     has the value 'IrDI').
+     The default value of this object is false(2)."
+  ::= { optIfOTSnConfigEntry 9 }
+
+optIfOTSnCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    bdiP(0),
+    bdiO(1),
+    bdi(2),
+    tim(3),
+    losP(4),
+    losO(5),
+    los(6)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     This object is applicable when optIfOTSnDirectionality
+     has the value sink(1) or bidirectional(3).  In
+     reduced-capability systems or at IrDI interfaces
+     the only bit position that may be set is los(6)."
+  ::= { optIfOTSnConfigEntry 10 }
+
+-- OTSn sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOTSnSinkCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn sink performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOTSn 2 }
+
+optIfOTSnSinkCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn sink performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnSinkCurrentTable 1 }
+
+OptIfOTSnSinkCurrentEntry ::=
+  SEQUENCE {
+    optIfOTSnSinkCurrentSuspectedFlag             TruthValue,
+    optIfOTSnSinkCurrentInputPower                Integer32,
+    optIfOTSnSinkCurrentLowInputPower             Integer32,
+    optIfOTSnSinkCurrentHighInputPower            Integer32,
+    optIfOTSnSinkCurrentLowerInputPowerThreshold  Integer32,
+    optIfOTSnSinkCurrentUpperInputPowerThreshold  Integer32,
+    optIfOTSnSinkCurrentOutputPower               Integer32,
+    optIfOTSnSinkCurrentLowOutputPower            Integer32,
+    optIfOTSnSinkCurrentHighOutputPower           Integer32,
+    optIfOTSnSinkCurrentLowerOutputPowerThreshold Integer32,
+    optIfOTSnSinkCurrentUpperOutputPowerThreshold Integer32
+    }
+
+optIfOTSnSinkCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSinkCurrentEntry 1 }
+
+optIfOTSnSinkCurrentInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the input."
+  ::= { optIfOTSnSinkCurrentEntry 2 }
+
+optIfOTSnSinkCurrentLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     current 15-minute interval."
+  ::= { optIfOTSnSinkCurrentEntry 3 }
+
+optIfOTSnSinkCurrentHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     current 15-minute interval."
+  ::= { optIfOTSnSinkCurrentEntry 4 }
+
+optIfOTSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on input power.  If
+     optIfOTSnSinkCurrentInputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSinkCurrentEntry 5 }
+
+optIfOTSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on input power.  If
+     optIfOTSnSinkCurrentInputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSinkCurrentEntry 6 }
+
+optIfOTSnSinkCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output."
+  ::= { optIfOTSnSinkCurrentEntry 7 }
+
+optIfOTSnSinkCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOTSnSinkCurrentEntry 8 }
+
+optIfOTSnSinkCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOTSnSinkCurrentEntry 9 }
+
+optIfOTSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on output power.  If
+     optIfOTSnSinkCurrentOutputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSinkCurrentEntry 10 }
+
+optIfOTSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on output power.  If
+     optIfOTSnSinkCurrentOutputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSinkCurrentEntry 11 }
+
+-- OTSn sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOTSnSinkIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OTSn sink performance monitoring
+     information."
+  ::= { optIfOTSn 3 }
+
+optIfOTSnSinkIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn sink performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOTSnSinkIntervalNumber }
+  ::= { optIfOTSnSinkIntervalTable 1 }
+
+OptIfOTSnSinkIntervalEntry ::=
+  SEQUENCE {
+    optIfOTSnSinkIntervalNumber           OptIfIntervalNumber,
+    optIfOTSnSinkIntervalSuspectedFlag    TruthValue,
+    optIfOTSnSinkIntervalLastInputPower   Integer32,
+    optIfOTSnSinkIntervalLowInputPower    Integer32,
+    optIfOTSnSinkIntervalHighInputPower   Integer32,
+    optIfOTSnSinkIntervalLastOutputPower  Integer32,
+    optIfOTSnSinkIntervalLowOutputPower   Integer32,
+    optIfOTSnSinkIntervalHighOutputPower  Integer32
+
+    }
+
+optIfOTSnSinkIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOTSnSinkIntervalEntry 1 }
+
+optIfOTSnSinkIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSinkIntervalEntry 2 }
+
+optIfOTSnSinkIntervalLastInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the input during the
+     interval."
+  ::= { optIfOTSnSinkIntervalEntry 3 }
+
+optIfOTSnSinkIntervalLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     interval."
+  ::= { optIfOTSnSinkIntervalEntry 4 }
+
+optIfOTSnSinkIntervalHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     interval."
+  ::= { optIfOTSnSinkIntervalEntry 5 }
+
+optIfOTSnSinkIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     interval."
+  ::= { optIfOTSnSinkIntervalEntry 6 }
+
+optIfOTSnSinkIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     interval."
+  ::= { optIfOTSnSinkIntervalEntry 7 }
+
+optIfOTSnSinkIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     interval."
+  ::= { optIfOTSnSinkIntervalEntry 8 }
+
+-- OTSn sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSinkCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn sink performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOTSn 4 }
+
+optIfOTSnSinkCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn sink performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnSinkCurDayTable 1 }
+
+OptIfOTSnSinkCurDayEntry ::=
+  SEQUENCE {
+    optIfOTSnSinkCurDaySuspectedFlag    TruthValue,
+    optIfOTSnSinkCurDayLowInputPower    Integer32,
+    optIfOTSnSinkCurDayHighInputPower   Integer32,
+    optIfOTSnSinkCurDayLowOutputPower   Integer32,
+    optIfOTSnSinkCurDayHighOutputPower  Integer32
+    }
+
+optIfOTSnSinkCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSinkCurDayEntry 1 }
+
+optIfOTSnSinkCurDayLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     current 24-hour interval."
+  ::= { optIfOTSnSinkCurDayEntry 2 }
+
+optIfOTSnSinkCurDayHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     current 24-hour interval."
+  ::= { optIfOTSnSinkCurDayEntry 3 }
+
+optIfOTSnSinkCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOTSnSinkCurDayEntry 4 }
+
+optIfOTSnSinkCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOTSnSinkCurDayEntry 5 }
+
+-- OTSn sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSinkPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn sink performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOTSn 5 }
+
+optIfOTSnSinkPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn sink performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnSinkPrevDayTable 1 }
+
+OptIfOTSnSinkPrevDayEntry ::=
+  SEQUENCE {
+    optIfOTSnSinkPrevDaySuspectedFlag    TruthValue,
+    optIfOTSnSinkPrevDayLastInputPower   Integer32,
+    optIfOTSnSinkPrevDayLowInputPower    Integer32,
+    optIfOTSnSinkPrevDayHighInputPower   Integer32,
+    optIfOTSnSinkPrevDayLastOutputPower  Integer32,
+    optIfOTSnSinkPrevDayLowOutputPower   Integer32,
+    optIfOTSnSinkPrevDayHighOutputPower  Integer32
+    }
+
+optIfOTSnSinkPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSinkPrevDayEntry 1 }
+
+optIfOTSnSinkPrevDayLastInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSinkPrevDayEntry 2 }
+
+optIfOTSnSinkPrevDayLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSinkPrevDayEntry 3 }
+
+optIfOTSnSinkPrevDayHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSinkPrevDayEntry 4 }
+
+optIfOTSnSinkPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSinkPrevDayEntry 5 }
+
+optIfOTSnSinkPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSinkPrevDayEntry 6 }
+
+optIfOTSnSinkPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSinkPrevDayEntry 7 }
+
+-- OTSn source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOTSnSrcCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn source performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOTSn 6 }
+
+optIfOTSnSrcCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn source performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnSrcCurrentTable 1 }
+
+OptIfOTSnSrcCurrentEntry ::=
+  SEQUENCE {
+    optIfOTSnSrcCurrentSuspectedFlag              TruthValue,
+    optIfOTSnSrcCurrentOutputPower                Integer32,
+    optIfOTSnSrcCurrentLowOutputPower             Integer32,
+    optIfOTSnSrcCurrentHighOutputPower            Integer32,
+    optIfOTSnSrcCurrentLowerOutputPowerThreshold  Integer32,
+    optIfOTSnSrcCurrentUpperOutputPowerThreshold  Integer32,
+    optIfOTSnSrcCurrentInputPower                 Integer32,
+    optIfOTSnSrcCurrentLowInputPower              Integer32,
+    optIfOTSnSrcCurrentHighInputPower             Integer32,
+    optIfOTSnSrcCurrentLowerInputPowerThreshold   Integer32,
+    optIfOTSnSrcCurrentUpperInputPowerThreshold   Integer32
+    }
+
+optIfOTSnSrcCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSrcCurrentEntry 1 }
+
+optIfOTSnSrcCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output."
+  ::= { optIfOTSnSrcCurrentEntry 2 }
+
+optIfOTSnSrcCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOTSnSrcCurrentEntry 3 }
+
+optIfOTSnSrcCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOTSnSrcCurrentEntry 4 }
+
+optIfOTSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on output power.  If
+     optIfOTSnSrcCurrentOutputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSrcCurrentEntry 5 }
+
+optIfOTSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on output power.  If
+     optIfOTSnSrcCurrentOutputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSrcCurrentEntry 6 }
+
+optIfOTSnSrcCurrentInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the input."
+  ::= { optIfOTSnSrcCurrentEntry 7 }
+
+optIfOTSnSrcCurrentLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     current 15-minute interval."
+  ::= { optIfOTSnSrcCurrentEntry 8 }
+
+optIfOTSnSrcCurrentHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     current 15-minute interval."
+  ::= { optIfOTSnSrcCurrentEntry 9 }
+
+optIfOTSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on input power.  If
+     optIfOTSnSrcCurrentInputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSrcCurrentEntry 10 }
+
+optIfOTSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on input power.  If
+     optIfOTSnSrcCurrentInputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOTSnSrcCurrentEntry 11 }
+
+-- OTSn source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOTSnSrcIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OTSn source performance monitoring
+     information."
+  ::= { optIfOTSn 7 }
+
+optIfOTSnSrcIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn source performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOTSnSrcIntervalNumber }
+  ::= { optIfOTSnSrcIntervalTable 1 }
+
+OptIfOTSnSrcIntervalEntry ::=
+  SEQUENCE {
+    optIfOTSnSrcIntervalNumber           OptIfIntervalNumber,
+    optIfOTSnSrcIntervalSuspectedFlag    TruthValue,
+    optIfOTSnSrcIntervalLastOutputPower  Integer32,
+    optIfOTSnSrcIntervalLowOutputPower   Integer32,
+    optIfOTSnSrcIntervalHighOutputPower  Integer32,
+    optIfOTSnSrcIntervalLastInputPower   Integer32,
+    optIfOTSnSrcIntervalLowInputPower    Integer32,
+    optIfOTSnSrcIntervalHighInputPower   Integer32
+    }
+
+optIfOTSnSrcIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOTSnSrcIntervalEntry 1 }
+
+optIfOTSnSrcIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSrcIntervalEntry 2 }
+
+optIfOTSnSrcIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     interval."
+  ::= { optIfOTSnSrcIntervalEntry 3 }
+
+optIfOTSnSrcIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     interval."
+  ::= { optIfOTSnSrcIntervalEntry 4 }
+
+optIfOTSnSrcIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     interval."
+  ::= { optIfOTSnSrcIntervalEntry 5 }
+
+optIfOTSnSrcIntervalLastInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the input during the
+     interval."
+  ::= { optIfOTSnSrcIntervalEntry 6 }
+
+optIfOTSnSrcIntervalLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     interval."
+  ::= { optIfOTSnSrcIntervalEntry 7 }
+
+optIfOTSnSrcIntervalHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     interval."
+  ::= { optIfOTSnSrcIntervalEntry 8 }
+
+-- OTSn source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSrcCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn source performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOTSn 8 }
+
+optIfOTSnSrcCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn source performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnSrcCurDayTable 1 }
+
+OptIfOTSnSrcCurDayEntry ::=
+  SEQUENCE {
+    optIfOTSnSrcCurDaySuspectedFlag    TruthValue,
+    optIfOTSnSrcCurDayLowOutputPower   Integer32,
+    optIfOTSnSrcCurDayHighOutputPower  Integer32,
+    optIfOTSnSrcCurDayLowInputPower    Integer32,
+    optIfOTSnSrcCurDayHighInputPower   Integer32
+    }
+
+optIfOTSnSrcCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSrcCurDayEntry 1 }
+
+optIfOTSnSrcCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOTSnSrcCurDayEntry 2 }
+
+optIfOTSnSrcCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOTSnSrcCurDayEntry 3 }
+
+optIfOTSnSrcCurDayLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     current 24-hour interval."
+  ::= { optIfOTSnSrcCurDayEntry 4 }
+
+optIfOTSnSrcCurDayHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     current 24-hour interval."
+  ::= { optIfOTSnSrcCurDayEntry 5 }
+
+-- OTSn source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSrcPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTSnSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTSn source performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOTSn 9 }
+
+optIfOTSnSrcPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOTSnSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTSn source performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOTSnSrcPrevDayTable 1 }
+
+OptIfOTSnSrcPrevDayEntry ::=
+  SEQUENCE {
+    optIfOTSnSrcPrevDaySuspectedFlag    TruthValue,
+    optIfOTSnSrcPrevDayLastOutputPower  Integer32,
+    optIfOTSnSrcPrevDayLowOutputPower   Integer32,
+    optIfOTSnSrcPrevDayHighOutputPower  Integer32,
+    optIfOTSnSrcPrevDayLastInputPower   Integer32,
+    optIfOTSnSrcPrevDayLowInputPower    Integer32,
+    optIfOTSnSrcPrevDayHighInputPower   Integer32
+    }
+
+optIfOTSnSrcPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOTSnSrcPrevDayEntry 1 }
+
+optIfOTSnSrcPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSrcPrevDayEntry 2 }
+
+optIfOTSnSrcPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSrcPrevDayEntry 3 }
+
+optIfOTSnSrcPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSrcPrevDayEntry 4 }
+
+optIfOTSnSrcPrevDayLastInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSrcPrevDayEntry 5 }
+
+optIfOTSnSrcPrevDayLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSrcPrevDayEntry 6 }
+
+optIfOTSnSrcPrevDayHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOTSnSrcPrevDayEntry 7 }
+
+-- the optIfOMSn group
+-- This group handles the configuration and performance monitoring
+-- information for OMS layers.
+
+-- OMSn config table
+
+optIfOMSnConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn configuration information."
+  ::= { optIfOMSn 1 }
+
+optIfOMSnConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnConfigTable 1 }
+
+OptIfOMSnConfigEntry ::=
+  SEQUENCE {
+    optIfOMSnDirectionality OptIfDirectionality,
+    optIfOMSnCurrentStatus  BITS
+    }
+
+optIfOMSnDirectionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity."
+  ::= { optIfOMSnConfigEntry 1 }
+
+optIfOMSnCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    ssfP(0),
+    ssfO(1),
+    ssf(2),
+    bdiP(3),
+    bdiO(4),
+    bdi(5),
+    losP(6)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     This object is applicable only to full capability
+     systems whose interface type is IaDI and for which
+
+     optIfOMSnDirectionality has the value sink(1) or
+     bidirectional(3)."
+  ::= { optIfOMSnConfigEntry 2 }
+
+-- OMSn sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOMSnSinkCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn sink performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOMSn 2 }
+
+optIfOMSnSinkCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn sink performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnSinkCurrentTable 1 }
+
+OptIfOMSnSinkCurrentEntry ::=
+  SEQUENCE {
+    optIfOMSnSinkCurrentSuspectedFlag              TruthValue,
+    optIfOMSnSinkCurrentAggregatedInputPower       Integer32,
+    optIfOMSnSinkCurrentLowAggregatedInputPower    Integer32,
+    optIfOMSnSinkCurrentHighAggregatedInputPower   Integer32,
+    optIfOMSnSinkCurrentLowerInputPowerThreshold   Integer32,
+    optIfOMSnSinkCurrentUpperInputPowerThreshold   Integer32,
+    optIfOMSnSinkCurrentOutputPower                Integer32,
+    optIfOMSnSinkCurrentLowOutputPower             Integer32,
+    optIfOMSnSinkCurrentHighOutputPower            Integer32,
+    optIfOMSnSinkCurrentLowerOutputPowerThreshold  Integer32,
+    optIfOMSnSinkCurrentUpperOutputPowerThreshold  Integer32
+    }
+
+optIfOMSnSinkCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSinkCurrentEntry 1 }
+
+optIfOMSnSinkCurrentAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The aggregated optical power of all the DWDM input
+     channels."
+  ::= { optIfOMSnSinkCurrentEntry 2 }
+
+optIfOMSnSinkCurrentLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels during the current 15-minute interval."
+  ::= { optIfOMSnSinkCurrentEntry 3 }
+
+optIfOMSnSinkCurrentHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels during the current 15-minute interval."
+  ::= { optIfOMSnSinkCurrentEntry 4 }
+
+optIfOMSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on aggregated input power.  If
+     optIfOMSnSinkCurrentAggregatedInputPower drops to this value
+     or below, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSinkCurrentEntry 5 }
+
+optIfOMSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on aggregated input power.  If
+     optIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds
+     this value, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSinkCurrentEntry 6 }
+
+optIfOMSnSinkCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output."
+  ::= { optIfOMSnSinkCurrentEntry 7 }
+
+optIfOMSnSinkCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output
+     during the current 15-minute interval."
+  ::= { optIfOMSnSinkCurrentEntry 8 }
+
+optIfOMSnSinkCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output
+     during the current 15-minute interval."
+  ::= { optIfOMSnSinkCurrentEntry 9 }
+
+optIfOMSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on output power.  If
+     optIfOMSnSinkCurrentOutputPower drops to this value
+     or below, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSinkCurrentEntry 10 }
+
+optIfOMSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on output power.  If
+     optIfOMSnSinkCurrentOutputPower reaches or exceeds
+     this value, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSinkCurrentEntry 11 }
+
+-- OMSn sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOMSnSinkIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OMSn sink performance monitoring
+     information."
+  ::= { optIfOMSn 3 }
+
+optIfOMSnSinkIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn sink performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOMSnSinkIntervalNumber }
+  ::= { optIfOMSnSinkIntervalTable 1 }
+
+OptIfOMSnSinkIntervalEntry ::=
+  SEQUENCE {
+    optIfOMSnSinkIntervalNumber                    OptIfIntervalNumber,
+    optIfOMSnSinkIntervalSuspectedFlag             TruthValue,
+    optIfOMSnSinkIntervalLastAggregatedInputPower  Integer32,
+    optIfOMSnSinkIntervalLowAggregatedInputPower   Integer32,
+    optIfOMSnSinkIntervalHighAggregatedInputPower  Integer32,
+    optIfOMSnSinkIntervalLastOutputPower           Integer32,
+    optIfOMSnSinkIntervalLowOutputPower            Integer32,
+    optIfOMSnSinkIntervalHighOutputPower           Integer32
+    }
+
+optIfOMSnSinkIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOMSnSinkIntervalEntry 1 }
+
+optIfOMSnSinkIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSinkIntervalEntry 2 }
+
+optIfOMSnSinkIntervalLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power of all the DWDM input
+     channels during the interval."
+  ::= { optIfOMSnSinkIntervalEntry 3 }
+
+optIfOMSnSinkIntervalLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels during the interval."
+  ::= { optIfOMSnSinkIntervalEntry 4 }
+
+optIfOMSnSinkIntervalHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels during the interval."
+  ::= { optIfOMSnSinkIntervalEntry 5 }
+
+optIfOMSnSinkIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power at the output
+     during the interval."
+  ::= { optIfOMSnSinkIntervalEntry 6 }
+
+optIfOMSnSinkIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power at the output
+     during the interval."
+  ::= { optIfOMSnSinkIntervalEntry 7 }
+
+optIfOMSnSinkIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power at the output
+     during the interval."
+  ::= { optIfOMSnSinkIntervalEntry 8 }
+
+-- OMSn sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSinkCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn sink performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOMSn 4 }
+
+optIfOMSnSinkCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn sink performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnSinkCurDayTable 1 }
+
+OptIfOMSnSinkCurDayEntry ::=
+  SEQUENCE {
+    optIfOMSnSinkCurDaySuspectedFlag             TruthValue,
+    optIfOMSnSinkCurDayLowAggregatedInputPower   Integer32,
+    optIfOMSnSinkCurDayHighAggregatedInputPower  Integer32,
+    optIfOMSnSinkCurDayLowOutputPower            Integer32,
+    optIfOMSnSinkCurDayHighOutputPower           Integer32
+    }
+
+optIfOMSnSinkCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSinkCurDayEntry 1 }
+
+optIfOMSnSinkCurDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels during the current 24-hour interval."
+  ::= { optIfOMSnSinkCurDayEntry 2 }
+
+optIfOMSnSinkCurDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels during the current 24-hour interval."
+  ::= { optIfOMSnSinkCurDayEntry 3 }
+
+optIfOMSnSinkCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power at the output
+     during the current 24-hour interval."
+  ::= { optIfOMSnSinkCurDayEntry 4 }
+
+optIfOMSnSinkCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest  optical power at the output
+     during the current 24-hour interval."
+  ::= { optIfOMSnSinkCurDayEntry 5 }
+
+-- OMSn sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSinkPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn sink performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOMSn 5 }
+
+optIfOMSnSinkPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn sink performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnSinkPrevDayTable 1 }
+
+OptIfOMSnSinkPrevDayEntry ::=
+  SEQUENCE {
+    optIfOMSnSinkPrevDaySuspectedFlag             TruthValue,
+    optIfOMSnSinkPrevDayLastAggregatedInputPower  Integer32,
+    optIfOMSnSinkPrevDayLowAggregatedInputPower   Integer32,
+    optIfOMSnSinkPrevDayHighAggregatedInputPower  Integer32,
+    optIfOMSnSinkPrevDayLastOutputPower           Integer32,
+    optIfOMSnSinkPrevDayLowOutputPower            Integer32,
+    optIfOMSnSinkPrevDayHighOutputPower           Integer32
+    }
+
+optIfOMSnSinkPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSinkPrevDayEntry 1 }
+
+optIfOMSnSinkPrevDayLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power of all the DWDM input
+     channels during the previous 24-hour interval."
+  ::= { optIfOMSnSinkPrevDayEntry 2 }
+
+optIfOMSnSinkPrevDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels during the previous 24-hour interval."
+  ::= { optIfOMSnSinkPrevDayEntry 3 }
+
+optIfOMSnSinkPrevDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels during the previous 24-hour interval."
+  ::= { optIfOMSnSinkPrevDayEntry 4 }
+
+optIfOMSnSinkPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last  optical power at the output
+     during the previous 24-hour interval."
+  ::= { optIfOMSnSinkPrevDayEntry 5 }
+
+optIfOMSnSinkPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power at the output
+     during the previous 24-hour interval."
+  ::= { optIfOMSnSinkPrevDayEntry 6 }
+
+optIfOMSnSinkPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power at the output
+     during the previous 24-hour interval."
+  ::= { optIfOMSnSinkPrevDayEntry 7 }
+
+-- OMSn source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOMSnSrcCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn source performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOMSn 6 }
+
+optIfOMSnSrcCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn source performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnSrcCurrentTable 1 }
+
+OptIfOMSnSrcCurrentEntry ::=
+  SEQUENCE {
+    optIfOMSnSrcCurrentSuspectedFlag              TruthValue,
+    optIfOMSnSrcCurrentOutputPower                Integer32,
+    optIfOMSnSrcCurrentLowOutputPower             Integer32,
+    optIfOMSnSrcCurrentHighOutputPower            Integer32,
+    optIfOMSnSrcCurrentLowerOutputPowerThreshold  Integer32,
+    optIfOMSnSrcCurrentUpperOutputPowerThreshold  Integer32,
+    optIfOMSnSrcCurrentAggregatedInputPower       Integer32,
+    optIfOMSnSrcCurrentLowAggregatedInputPower    Integer32,
+    optIfOMSnSrcCurrentHighAggregatedInputPower   Integer32,
+    optIfOMSnSrcCurrentLowerInputPowerThreshold   Integer32,
+    optIfOMSnSrcCurrentUpperInputPowerThreshold   Integer32
+    }
+
+optIfOMSnSrcCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSrcCurrentEntry 1 }
+
+optIfOMSnSrcCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output."
+  ::= { optIfOMSnSrcCurrentEntry 2 }
+
+optIfOMSnSrcCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOMSnSrcCurrentEntry 3 }
+
+optIfOMSnSrcCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOMSnSrcCurrentEntry 4 }
+
+optIfOMSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on output power.  If
+     optIfOMSnSrcCurrentOutputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSrcCurrentEntry 5 }
+
+optIfOMSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on output power.  If
+     optIfOMSnSrcCurrentOutputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSrcCurrentEntry 6 }
+
+optIfOMSnSrcCurrentAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The aggregated optical power at the input."
+  ::= { optIfOMSnSrcCurrentEntry 7 }
+
+optIfOMSnSrcCurrentLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power at the input
+     during the current 15-minute interval."
+  ::= { optIfOMSnSrcCurrentEntry 8 }
+
+optIfOMSnSrcCurrentHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power at the input
+     during the current 15-minute interval."
+  ::= { optIfOMSnSrcCurrentEntry 9 }
+
+optIfOMSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on aggregated input power.  If
+     optIfOMSnSrcCurrentAggregatedInputPower drops to this value
+     or below, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSrcCurrentEntry 10 }
+
+optIfOMSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on aggregated input power.  If
+     optIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds
+     this value, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOMSnSrcCurrentEntry 11 }
+
+-- OMSn source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOMSnSrcIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OMSn source performance monitoring
+     information."
+  ::= { optIfOMSn 7 }
+
+optIfOMSnSrcIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn source performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOMSnSrcIntervalNumber }
+  ::= { optIfOMSnSrcIntervalTable 1 }
+
+OptIfOMSnSrcIntervalEntry ::=
+
+  SEQUENCE {
+    optIfOMSnSrcIntervalNumber                    OptIfIntervalNumber,
+    optIfOMSnSrcIntervalSuspectedFlag             TruthValue,
+    optIfOMSnSrcIntervalLastOutputPower           Integer32,
+    optIfOMSnSrcIntervalLowOutputPower            Integer32,
+    optIfOMSnSrcIntervalHighOutputPower           Integer32,
+    optIfOMSnSrcIntervalLastAggregatedInputPower  Integer32,
+    optIfOMSnSrcIntervalLowAggregatedInputPower   Integer32,
+    optIfOMSnSrcIntervalHighAggregatedInputPower  Integer32
+    }
+
+optIfOMSnSrcIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOMSnSrcIntervalEntry 1 }
+
+optIfOMSnSrcIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSrcIntervalEntry 2 }
+
+optIfOMSnSrcIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     interval."
+  ::= { optIfOMSnSrcIntervalEntry 3 }
+
+optIfOMSnSrcIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     interval."
+  ::= { optIfOMSnSrcIntervalEntry 4 }
+
+optIfOMSnSrcIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     interval."
+  ::= { optIfOMSnSrcIntervalEntry 5 }
+
+optIfOMSnSrcIntervalLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power at the input
+     during the interval."
+  ::= { optIfOMSnSrcIntervalEntry 6 }
+
+optIfOMSnSrcIntervalLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power at the input
+     during the interval."
+  ::= { optIfOMSnSrcIntervalEntry 7 }
+
+optIfOMSnSrcIntervalHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power at the input
+     during the interval."
+  ::= { optIfOMSnSrcIntervalEntry 8 }
+
+-- OMSn source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSrcCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn source performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOMSn 8 }
+
+optIfOMSnSrcCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn source performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnSrcCurDayTable 1 }
+
+OptIfOMSnSrcCurDayEntry ::=
+  SEQUENCE {
+    optIfOMSnSrcCurDaySuspectedFlag             TruthValue,
+    optIfOMSnSrcCurDayLowOutputPower            Integer32,
+    optIfOMSnSrcCurDayHighOutputPower           Integer32,
+    optIfOMSnSrcCurDayLowAggregatedInputPower   Integer32,
+    optIfOMSnSrcCurDayHighAggregatedInputPower  Integer32
+    }
+
+optIfOMSnSrcCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSrcCurDayEntry 1 }
+
+optIfOMSnSrcCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOMSnSrcCurDayEntry 2 }
+
+optIfOMSnSrcCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOMSnSrcCurDayEntry 3 }
+
+optIfOMSnSrcCurDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power at the input
+     during the current 24-hour interval."
+  ::= { optIfOMSnSrcCurDayEntry 4 }
+
+optIfOMSnSrcCurDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power at the input
+     during the current 24-hour interval."
+  ::= { optIfOMSnSrcCurDayEntry 5 }
+
+-- OMSn source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSrcPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOMSnSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OMSn source performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOMSn 9 }
+
+optIfOMSnSrcPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOMSnSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OMSn source performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOMSnSrcPrevDayTable 1 }
+
+OptIfOMSnSrcPrevDayEntry ::=
+  SEQUENCE {
+    optIfOMSnSrcPrevDaySuspectedFlag             TruthValue,
+    optIfOMSnSrcPrevDayLastOutputPower           Integer32,
+    optIfOMSnSrcPrevDayLowOutputPower            Integer32,
+    optIfOMSnSrcPrevDayHighOutputPower           Integer32,
+    optIfOMSnSrcPrevDayLastAggregatedInputPower  Integer32,
+    optIfOMSnSrcPrevDayLowAggregatedInputPower   Integer32,
+    optIfOMSnSrcPrevDayHighAggregatedInputPower  Integer32
+    }
+
+optIfOMSnSrcPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOMSnSrcPrevDayEntry 1 }
+
+optIfOMSnSrcPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOMSnSrcPrevDayEntry 2 }
+
+optIfOMSnSrcPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOMSnSrcPrevDayEntry 3 }
+
+optIfOMSnSrcPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOMSnSrcPrevDayEntry 4 }
+
+optIfOMSnSrcPrevDayLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power at the input during the
+     previous 24-hour interval."
+  ::= { optIfOMSnSrcPrevDayEntry 5 }
+
+optIfOMSnSrcPrevDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power at the input during the
+     previous 24-hour interval."
+  ::= { optIfOMSnSrcPrevDayEntry 6 }
+
+optIfOMSnSrcPrevDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power at the input during the
+     previous 24-hour interval."
+  ::= { optIfOMSnSrcPrevDayEntry 7 }
+
+-- the optIfOChGroup group
+-- This group handles the configuration and performance monitoring
+-- information for OChGroup layers.
+
+-- OChGroup config table
+
+optIfOChGroupConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup configuration information."
+  ::= { optIfOChGroup 1 }
+
+optIfOChGroupConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupConfigTable 1 }
+
+OptIfOChGroupConfigEntry ::=
+  SEQUENCE {
+    optIfOChGroupDirectionality OptIfDirectionality
+    }
+
+optIfOChGroupDirectionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity."
+  ::= { optIfOChGroupConfigEntry 1 }
+
+-- OChGroup sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChGroupSinkCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup sink performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOChGroup 2 }
+
+optIfOChGroupSinkCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup sink performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupSinkCurrentTable 1 }
+
+OptIfOChGroupSinkCurrentEntry ::=
+  SEQUENCE {
+    optIfOChGroupSinkCurrentSuspectedFlag              TruthValue,
+    optIfOChGroupSinkCurrentAggregatedInputPower       Integer32,
+    optIfOChGroupSinkCurrentLowAggregatedInputPower    Integer32,
+    optIfOChGroupSinkCurrentHighAggregatedInputPower   Integer32,
+    optIfOChGroupSinkCurrentLowerInputPowerThreshold   Integer32,
+    optIfOChGroupSinkCurrentUpperInputPowerThreshold   Integer32,
+    optIfOChGroupSinkCurrentOutputPower                Integer32,
+    optIfOChGroupSinkCurrentLowOutputPower             Integer32,
+    optIfOChGroupSinkCurrentHighOutputPower            Integer32,
+    optIfOChGroupSinkCurrentLowerOutputPowerThreshold  Integer32,
+    optIfOChGroupSinkCurrentUpperOutputPowerThreshold  Integer32
+    }
+
+optIfOChGroupSinkCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSinkCurrentEntry 1 }
+
+optIfOChGroupSinkCurrentAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The aggregated optical power of all the DWDM input
+     channels in the OChGroup."
+  ::= { optIfOChGroupSinkCurrentEntry 2 }
+
+optIfOChGroupSinkCurrentLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the current 15-minute interval."
+  ::= { optIfOChGroupSinkCurrentEntry 3 }
+
+optIfOChGroupSinkCurrentHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the current 15-minute interval."
+  ::= { optIfOChGroupSinkCurrentEntry 4 }
+
+optIfOChGroupSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on aggregated input power.  If
+     optIfOChGroupSinkCurrentAggregatedInputPower drops to this value
+     or below, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSinkCurrentEntry 5 }
+
+optIfOChGroupSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on aggregated input power.  If
+     optIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds
+     this value, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSinkCurrentEntry 6 }
+
+optIfOChGroupSinkCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output
+     in the OChGroup."
+  ::= { optIfOChGroupSinkCurrentEntry 7 }
+
+optIfOChGroupSinkCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output
+     in the OChGroup during the current 15-minute interval."
+  ::= { optIfOChGroupSinkCurrentEntry 8 }
+
+optIfOChGroupSinkCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output
+     in the OChGroup during the current 15-minute interval."
+  ::= { optIfOChGroupSinkCurrentEntry 9 }
+
+optIfOChGroupSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on the output power.  If
+     optIfOChGroupSinkCurrentOutputPower drops to this value
+     or below, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSinkCurrentEntry 10 }
+
+optIfOChGroupSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on the output power.  If
+     optIfOChGroupSinkCurrentOutputPower reaches or exceeds
+     this value, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSinkCurrentEntry 11 }
+
+-- OChGroup sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChGroupSinkIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OChGroup sink performance monitoring
+     information."
+  ::= { optIfOChGroup 3 }
+
+optIfOChGroupSinkIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup sink performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOChGroupSinkIntervalNumber }
+  ::= { optIfOChGroupSinkIntervalTable 1 }
+
+OptIfOChGroupSinkIntervalEntry ::=
+  SEQUENCE {
+   optIfOChGroupSinkIntervalNumber                  OptIfIntervalNumber,
+   optIfOChGroupSinkIntervalSuspectedFlag            TruthValue,
+   optIfOChGroupSinkIntervalLastAggregatedInputPower Integer32,
+   optIfOChGroupSinkIntervalLowAggregatedInputPower  Integer32,
+   optIfOChGroupSinkIntervalHighAggregatedInputPower Integer32,
+   optIfOChGroupSinkIntervalLastOutputPower          Integer32,
+   optIfOChGroupSinkIntervalLowOutputPower           Integer32,
+   optIfOChGroupSinkIntervalHighOutputPower          Integer32
+   }
+
+optIfOChGroupSinkIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 1 }
+
+optIfOChGroupSinkIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSinkIntervalEntry 2 }
+
+optIfOChGroupSinkIntervalLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power of all the DWDM input
+     channels in the OChGroup during the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 3 }
+
+optIfOChGroupSinkIntervalLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 4 }
+
+optIfOChGroupSinkIntervalHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 5 }
+
+optIfOChGroupSinkIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output
+     in the OChGroup during the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 6 }
+
+optIfOChGroupSinkIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output
+     in the OChGroup during the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 7 }
+
+optIfOChGroupSinkIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output
+     in the OChGroup during the interval."
+  ::= { optIfOChGroupSinkIntervalEntry 8 }
+
+-- OChGroup sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSinkCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup sink performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOChGroup 4 }
+
+optIfOChGroupSinkCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup sink performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupSinkCurDayTable 1 }
+
+OptIfOChGroupSinkCurDayEntry ::=
+  SEQUENCE {
+    optIfOChGroupSinkCurDaySuspectedFlag             TruthValue,
+    optIfOChGroupSinkCurDayLowAggregatedInputPower   Integer32,
+    optIfOChGroupSinkCurDayHighAggregatedInputPower  Integer32,
+    optIfOChGroupSinkCurDayLowOutputPower            Integer32,
+    optIfOChGroupSinkCurDayHighOutputPower           Integer32
+    }
+
+optIfOChGroupSinkCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSinkCurDayEntry 1 }
+
+optIfOChGroupSinkCurDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the current 24-hour interval."
+  ::= { optIfOChGroupSinkCurDayEntry 2 }
+
+optIfOChGroupSinkCurDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the current 24-hour interval."
+  ::= { optIfOChGroupSinkCurDayEntry 3 }
+
+optIfOChGroupSinkCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output
+     in the OChGroup during the current 24-hour interval."
+  ::= { optIfOChGroupSinkCurDayEntry 4 }
+
+optIfOChGroupSinkCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output
+     in the OChGroup during the current 24-hour interval."
+  ::= { optIfOChGroupSinkCurDayEntry 5 }
+
+-- OChGroup sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSinkPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup sink performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOChGroup 5 }
+
+optIfOChGroupSinkPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup sink performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupSinkPrevDayTable 1 }
+
+OptIfOChGroupSinkPrevDayEntry ::=
+  SEQUENCE {
+    optIfOChGroupSinkPrevDaySuspectedFlag             TruthValue,
+    optIfOChGroupSinkPrevDayLastAggregatedInputPower  Integer32,
+    optIfOChGroupSinkPrevDayLowAggregatedInputPower   Integer32,
+    optIfOChGroupSinkPrevDayHighAggregatedInputPower  Integer32,
+    optIfOChGroupSinkPrevDayLastOutputPower           Integer32,
+    optIfOChGroupSinkPrevDayLowOutputPower            Integer32,
+    optIfOChGroupSinkPrevDayHighOutputPower           Integer32
+    }
+
+optIfOChGroupSinkPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSinkPrevDayEntry 1 }
+
+optIfOChGroupSinkPrevDayLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power of all the DWDM input
+     channels in the OChGroup during the previous 24-hour interval."
+  ::= { optIfOChGroupSinkPrevDayEntry 2 }
+
+optIfOChGroupSinkPrevDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the previous 24-hour interval."
+  ::= { optIfOChGroupSinkPrevDayEntry 3 }
+
+optIfOChGroupSinkPrevDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power of all the DWDM input
+     channels in the OChGroup during the previous 24-hour interval."
+  ::= { optIfOChGroupSinkPrevDayEntry 4 }
+
+optIfOChGroupSinkPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output
+     in the OChGroup during the previous 24-hour interval."
+  ::= { optIfOChGroupSinkPrevDayEntry 5 }
+
+optIfOChGroupSinkPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output
+     in the OChGroup during the previous 24-hour interval."
+  ::= { optIfOChGroupSinkPrevDayEntry 6 }
+
+optIfOChGroupSinkPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output
+     in the OChGroup during the previous 24-hour interval."
+  ::= { optIfOChGroupSinkPrevDayEntry 7 }
+
+-- OChGroup source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChGroupSrcCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup source performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOChGroup 6 }
+
+optIfOChGroupSrcCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup source performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupSrcCurrentTable 1 }
+
+OptIfOChGroupSrcCurrentEntry ::=
+  SEQUENCE {
+    optIfOChGroupSrcCurrentSuspectedFlag              TruthValue,
+    optIfOChGroupSrcCurrentOutputPower                Integer32,
+    optIfOChGroupSrcCurrentLowOutputPower             Integer32,
+    optIfOChGroupSrcCurrentHighOutputPower            Integer32,
+    optIfOChGroupSrcCurrentLowerOutputPowerThreshold  Integer32,
+    optIfOChGroupSrcCurrentUpperOutputPowerThreshold  Integer32,
+    optIfOChGroupSrcCurrentAggregatedInputPower       Integer32,
+    optIfOChGroupSrcCurrentLowAggregatedInputPower    Integer32,
+    optIfOChGroupSrcCurrentHighAggregatedInputPower   Integer32,
+    optIfOChGroupSrcCurrentLowerInputPowerThreshold   Integer32,
+    optIfOChGroupSrcCurrentUpperInputPowerThreshold   Integer32
+    }
+
+optIfOChGroupSrcCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSrcCurrentEntry 1 }
+
+optIfOChGroupSrcCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output."
+  ::= { optIfOChGroupSrcCurrentEntry 2 }
+
+optIfOChGroupSrcCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOChGroupSrcCurrentEntry 3 }
+
+optIfOChGroupSrcCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOChGroupSrcCurrentEntry 4 }
+
+optIfOChGroupSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on output power.  If
+     optIfOChGroupSrcCurrentOutputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSrcCurrentEntry 5 }
+
+optIfOChGroupSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on output power.  If
+     optIfOChGroupSrcCurrentOutputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSrcCurrentEntry 6 }
+
+optIfOChGroupSrcCurrentAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The aggregated optical power monitored at the input."
+  ::= { optIfOChGroupSrcCurrentEntry 7 }
+
+optIfOChGroupSrcCurrentLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power monitored at the input
+     during the current 15-minute interval."
+  ::= { optIfOChGroupSrcCurrentEntry 8 }
+
+optIfOChGroupSrcCurrentHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power monitored at the input
+     during the current 15-minute interval."
+  ::= { optIfOChGroupSrcCurrentEntry 9 }
+
+optIfOChGroupSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on input power.  If
+     optIfOChGroupSrcCurrentAggregatedInputPower drops to this value
+     or below, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSrcCurrentEntry 10 }
+
+optIfOChGroupSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on input power.  If
+     optIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds
+     this value, a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChGroupSrcCurrentEntry 11 }
+
+-- OChGroup source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChGroupSrcIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OChGroup source performance monitoring
+     information."
+  ::= { optIfOChGroup 7 }
+
+optIfOChGroupSrcIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup source performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOChGroupSrcIntervalNumber }
+  ::= { optIfOChGroupSrcIntervalTable 1 }
+
+OptIfOChGroupSrcIntervalEntry ::=
+  SEQUENCE {
+   optIfOChGroupSrcIntervalNumber                   OptIfIntervalNumber,
+   optIfOChGroupSrcIntervalSuspectedFlag             TruthValue,
+   optIfOChGroupSrcIntervalLastOutputPower           Integer32,
+   optIfOChGroupSrcIntervalLowOutputPower            Integer32,
+   optIfOChGroupSrcIntervalHighOutputPower           Integer32,
+   optIfOChGroupSrcIntervalLastAggregatedInputPower  Integer32,
+   optIfOChGroupSrcIntervalLowAggregatedInputPower   Integer32,
+   optIfOChGroupSrcIntervalHighAggregatedInputPower  Integer32
+   }
+
+optIfOChGroupSrcIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOChGroupSrcIntervalEntry 1 }
+
+optIfOChGroupSrcIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSrcIntervalEntry 2 }
+
+optIfOChGroupSrcIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     interval."
+  ::= { optIfOChGroupSrcIntervalEntry 3 }
+
+optIfOChGroupSrcIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     interval."
+  ::= { optIfOChGroupSrcIntervalEntry 4 }
+
+optIfOChGroupSrcIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     interval."
+  ::= { optIfOChGroupSrcIntervalEntry 5 }
+
+optIfOChGroupSrcIntervalLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power monitored at the input
+     during the interval."
+  ::= { optIfOChGroupSrcIntervalEntry 6 }
+
+optIfOChGroupSrcIntervalLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power monitored at the input
+     during the interval."
+  ::= { optIfOChGroupSrcIntervalEntry 7 }
+
+optIfOChGroupSrcIntervalHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power monitored at the input
+     during the interval."
+  ::= { optIfOChGroupSrcIntervalEntry 8 }
+
+-- OChGroup source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSrcCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup source performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOChGroup 8 }
+
+optIfOChGroupSrcCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup source performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupSrcCurDayTable 1 }
+
+OptIfOChGroupSrcCurDayEntry ::=
+  SEQUENCE {
+    optIfOChGroupSrcCurDaySuspectedFlag             TruthValue,
+    optIfOChGroupSrcCurDayLowOutputPower            Integer32,
+    optIfOChGroupSrcCurDayHighOutputPower           Integer32,
+    optIfOChGroupSrcCurDayLowAggregatedInputPower   Integer32,
+    optIfOChGroupSrcCurDayHighAggregatedInputPower  Integer32
+    }
+
+optIfOChGroupSrcCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSrcCurDayEntry 1 }
+
+optIfOChGroupSrcCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOChGroupSrcCurDayEntry 2 }
+
+optIfOChGroupSrcCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOChGroupSrcCurDayEntry 3 }
+
+optIfOChGroupSrcCurDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power monitored at the input
+     during the current 24-hour interval."
+  ::= { optIfOChGroupSrcCurDayEntry 4 }
+
+optIfOChGroupSrcCurDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power monitored at the input
+     during the current 24-hour interval."
+  ::= { optIfOChGroupSrcCurDayEntry 5 }
+
+-- OChGroup source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSrcPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChGroupSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OChGroup source performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOChGroup 9 }
+
+optIfOChGroupSrcPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChGroupSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OChGroup source performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChGroupSrcPrevDayTable 1 }
+
+OptIfOChGroupSrcPrevDayEntry ::=
+  SEQUENCE {
+    optIfOChGroupSrcPrevDaySuspectedFlag             TruthValue,
+    optIfOChGroupSrcPrevDayLastOutputPower           Integer32,
+    optIfOChGroupSrcPrevDayLowOutputPower            Integer32,
+    optIfOChGroupSrcPrevDayHighOutputPower           Integer32,
+    optIfOChGroupSrcPrevDayLastAggregatedInputPower  Integer32,
+    optIfOChGroupSrcPrevDayLowAggregatedInputPower   Integer32,
+    optIfOChGroupSrcPrevDayHighAggregatedInputPower  Integer32
+    }
+
+optIfOChGroupSrcPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChGroupSrcPrevDayEntry 1 }
+
+optIfOChGroupSrcPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOChGroupSrcPrevDayEntry 2 }
+
+optIfOChGroupSrcPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOChGroupSrcPrevDayEntry 3 }
+
+optIfOChGroupSrcPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOChGroupSrcPrevDayEntry 4 }
+
+optIfOChGroupSrcPrevDayLastAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last aggregated optical power monitored at the input
+     during the previous 24-hour interval."
+  ::= { optIfOChGroupSrcPrevDayEntry 5 }
+
+optIfOChGroupSrcPrevDayLowAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest aggregated optical power monitored at the input
+     during the previous 24-hour interval."
+  ::= { optIfOChGroupSrcPrevDayEntry 6 }
+
+optIfOChGroupSrcPrevDayHighAggregatedInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest aggregated optical power monitored at the input
+     during the previous 24-hour interval."
+  ::= { optIfOChGroupSrcPrevDayEntry 7 }
+
+-- the optIfOCh group
+
+-- This group handles the configuration and
+-- performance monitoring information for OCh layers.
+
+-- OCh config table
+
+optIfOChConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh configuration information."
+  ::= { optIfOCh 1 }
+
+optIfOChConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfOChConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfOChConfigTable 1 }
+
+OptIfOChConfigEntry ::=
+  SEQUENCE {
+    optIfOChDirectionality     OptIfDirectionality,
+    optIfOChCurrentStatus      BITS
+    }
+
+optIfOChDirectionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity."
+  ::= { optIfOChConfigEntry 1 }
+
+optIfOChCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    losP(0),
+    los(1),
+    oci(2),
+    ssfP(3),
+    ssfO(4),
+    ssf(5)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     This object is applicable when optIfOChDirectionality
+     has the value sink(1) or bidirectional(3).
+     In full-capability systems the bit position los(1) is not used.
+     In reduced-capability systems or at IrDI interfaces only
+     the bit positions los(1) and ssfP(3) are used."
+  ::= { optIfOChConfigEntry 2 }
+
+-- OCh sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChSinkCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh sink performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOCh 2 }
+
+optIfOChSinkCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSinkCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh sink performance
+     monitoring information for an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChSinkCurrentTable 1 }
+
+OptIfOChSinkCurrentEntry ::=
+  SEQUENCE {
+    optIfOChSinkCurrentSuspectedFlag             TruthValue,
+    optIfOChSinkCurrentInputPower                Integer32,
+    optIfOChSinkCurrentLowInputPower             Integer32,
+    optIfOChSinkCurrentHighInputPower            Integer32,
+    optIfOChSinkCurrentLowerInputPowerThreshold  Integer32,
+    optIfOChSinkCurrentUpperInputPowerThreshold  Integer32
+    }
+
+optIfOChSinkCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSinkCurrentEntry 1 }
+
+optIfOChSinkCurrentInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the input."
+  ::= { optIfOChSinkCurrentEntry 2 }
+
+optIfOChSinkCurrentLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     current 15-minute interval."
+  ::= { optIfOChSinkCurrentEntry 3 }
+
+optIfOChSinkCurrentHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     current 15-minute interval."
+  ::= { optIfOChSinkCurrentEntry 4 }
+
+optIfOChSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on input power.  If
+     optIfOChSinkCurrentInputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChSinkCurrentEntry 5 }
+
+optIfOChSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on input power.  If
+     optIfOChSinkCurrentInputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChSinkCurrentEntry 6 }
+
+-- OCh sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChSinkIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OCh sink performance monitoring
+     information."
+  ::= { optIfOCh 3 }
+
+optIfOChSinkIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSinkIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh sink performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOChSinkIntervalNumber }
+  ::= { optIfOChSinkIntervalTable 1 }
+
+OptIfOChSinkIntervalEntry ::=
+  SEQUENCE {
+    optIfOChSinkIntervalNumber          OptIfIntervalNumber,
+    optIfOChSinkIntervalSuspectedFlag   TruthValue,
+    optIfOChSinkIntervalLastInputPower  Integer32,
+    optIfOChSinkIntervalLowInputPower   Integer32,
+    optIfOChSinkIntervalHighInputPower  Integer32
+    }
+
+optIfOChSinkIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOChSinkIntervalEntry 1 }
+
+optIfOChSinkIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSinkIntervalEntry 2 }
+
+optIfOChSinkIntervalLastInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the input during the
+     interval."
+  ::= { optIfOChSinkIntervalEntry 3 }
+
+optIfOChSinkIntervalLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     interval."
+  ::= { optIfOChSinkIntervalEntry 4 }
+
+optIfOChSinkIntervalHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     interval."
+  ::= { optIfOChSinkIntervalEntry 5 }
+
+-- OCh sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChSinkCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh sink performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOCh 4 }
+
+optIfOChSinkCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSinkCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh sink performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChSinkCurDayTable 1 }
+
+OptIfOChSinkCurDayEntry ::=
+  SEQUENCE {
+    optIfOChSinkCurDaySuspectedFlag   TruthValue,
+    optIfOChSinkCurDayLowInputPower   Integer32,
+    optIfOChSinkCurDayHighInputPower  Integer32
+    }
+
+optIfOChSinkCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSinkCurDayEntry 1 }
+
+optIfOChSinkCurDayLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     current 24-hour interval."
+  ::= { optIfOChSinkCurDayEntry 2 }
+
+optIfOChSinkCurDayHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     current 24-hour interval."
+  ::= { optIfOChSinkCurDayEntry 3 }
+
+-- OCh sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChSinkPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh sink performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOCh 5 }
+
+optIfOChSinkPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSinkPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh sink performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChSinkPrevDayTable 1 }
+
+OptIfOChSinkPrevDayEntry ::=
+  SEQUENCE {
+    optIfOChSinkPrevDaySuspectedFlag   TruthValue,
+    optIfOChSinkPrevDayLastInputPower  Integer32,
+    optIfOChSinkPrevDayLowInputPower   Integer32,
+    optIfOChSinkPrevDayHighInputPower  Integer32
+    }
+
+optIfOChSinkPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSinkPrevDayEntry 1 }
+
+optIfOChSinkPrevDayLastInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOChSinkPrevDayEntry 2 }
+
+optIfOChSinkPrevDayLowInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOChSinkPrevDayEntry 3 }
+
+optIfOChSinkPrevDayHighInputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the input during the
+     previous 24-hour interval."
+  ::= { optIfOChSinkPrevDayEntry 4 }
+
+-- OCh source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChSrcCurrentTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh source performance monitoring information for
+     the current 15-minute interval."
+  ::= { optIfOCh 6 }
+
+optIfOChSrcCurrentEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSrcCurrentEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh source performance
+     monitoring information of an interface for the current
+     15-minute interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChSrcCurrentTable 1 }
+
+OptIfOChSrcCurrentEntry ::=
+  SEQUENCE {
+
+    optIfOChSrcCurrentSuspectedFlag              TruthValue,
+    optIfOChSrcCurrentOutputPower                Integer32,
+    optIfOChSrcCurrentLowOutputPower             Integer32,
+    optIfOChSrcCurrentHighOutputPower            Integer32,
+    optIfOChSrcCurrentLowerOutputPowerThreshold  Integer32,
+    optIfOChSrcCurrentUpperOutputPowerThreshold  Integer32
+    }
+
+optIfOChSrcCurrentSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSrcCurrentEntry 1 }
+
+optIfOChSrcCurrentOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The optical power monitored at the output."
+  ::= { optIfOChSrcCurrentEntry 2 }
+
+optIfOChSrcCurrentLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOChSrcCurrentEntry 3 }
+
+optIfOChSrcCurrentHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 15-minute interval."
+  ::= { optIfOChSrcCurrentEntry 4 }
+
+optIfOChSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The lower limit threshold on output power.  If
+     optIfOChSrcCurrentOutputPower drops to this value or below,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChSrcCurrentEntry 5 }
+
+optIfOChSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The upper limit threshold on output power.  If
+     optIfOChSrcCurrentOutputPower reaches or exceeds this value,
+     a Threshold Crossing Alert (TCA) should be sent."
+  ::= { optIfOChSrcCurrentEntry 6 }
+
+-- OCh source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChSrcIntervalTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of historical OCh source performance monitoring
+     information."
+  ::= { optIfOCh 7 }
+
+optIfOChSrcIntervalEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSrcIntervalEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh source performance
+     monitoring information of an interface during a particular
+     historical interval."
+  INDEX  { ifIndex, optIfOChSrcIntervalNumber }
+  ::= { optIfOChSrcIntervalTable 1 }
+
+OptIfOChSrcIntervalEntry ::=
+  SEQUENCE {
+    optIfOChSrcIntervalNumber           OptIfIntervalNumber,
+    optIfOChSrcIntervalSuspectedFlag    TruthValue,
+    optIfOChSrcIntervalLastOutputPower  Integer32,
+    optIfOChSrcIntervalLowOutputPower   Integer32,
+    optIfOChSrcIntervalHighOutputPower  Integer32
+    }
+
+optIfOChSrcIntervalNumber OBJECT-TYPE
+  SYNTAX  OptIfIntervalNumber
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Uniquely identifies the interval."
+  ::= { optIfOChSrcIntervalEntry 1 }
+
+optIfOChSrcIntervalSuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSrcIntervalEntry 2 }
+
+optIfOChSrcIntervalLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     interval."
+  ::= { optIfOChSrcIntervalEntry 3 }
+
+optIfOChSrcIntervalLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     interval."
+  ::= { optIfOChSrcIntervalEntry 4 }
+
+optIfOChSrcIntervalHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     interval."
+  ::= { optIfOChSrcIntervalEntry 5 }
+
+-- OCh source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChSrcCurDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh source performance monitoring information for
+     the current 24-hour interval."
+  ::= { optIfOCh 8 }
+
+optIfOChSrcCurDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSrcCurDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh source performance
+     monitoring information of an interface for the current
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChSrcCurDayTable 1 }
+
+OptIfOChSrcCurDayEntry ::=
+  SEQUENCE {
+    optIfOChSrcCurDaySuspectedFlag    TruthValue,
+    optIfOChSrcCurDayLowOutputPower   Integer32,
+    optIfOChSrcCurDayHighOutputPower  Integer32
+    }
+
+optIfOChSrcCurDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSrcCurDayEntry 1 }
+
+optIfOChSrcCurDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+
+     current 24-hour interval."
+  ::= { optIfOChSrcCurDayEntry 2 }
+
+optIfOChSrcCurDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     current 24-hour interval."
+  ::= { optIfOChSrcCurDayEntry 3 }
+
+-- OCh source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChSrcPrevDayTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOChSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OCh source performance monitoring information for
+     the previous 24-hour interval."
+  ::= { optIfOCh 9 }
+
+optIfOChSrcPrevDayEntry OBJECT-TYPE
+  SYNTAX  OptIfOChSrcPrevDayEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OCh source performance
+     monitoring information of an interface for the previous
+     24-hour interval."
+  INDEX  { ifIndex }
+  ::= { optIfOChSrcPrevDayTable 1 }
+
+OptIfOChSrcPrevDayEntry ::=
+  SEQUENCE {
+    optIfOChSrcPrevDaySuspectedFlag    TruthValue,
+    optIfOChSrcPrevDayLastOutputPower  Integer32,
+    optIfOChSrcPrevDayLowOutputPower   Integer32,
+    optIfOChSrcPrevDayHighOutputPower  Integer32
+    }
+
+optIfOChSrcPrevDaySuspectedFlag OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "If true, the data in this entry may be unreliable."
+  ::= { optIfOChSrcPrevDayEntry 1 }
+
+optIfOChSrcPrevDayLastOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The last optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOChSrcPrevDayEntry 2 }
+
+optIfOChSrcPrevDayLowOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The lowest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOChSrcPrevDayEntry 3 }
+
+optIfOChSrcPrevDayHighOutputPower OBJECT-TYPE
+  SYNTAX  Integer32
+  UNITS  "0.1 dbm"
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The highest optical power monitored at the output during the
+     previous 24-hour interval."
+  ::= { optIfOChSrcPrevDayEntry 4 }
+
+-- the optIfOTUk group
+-- This group handles the configuration
+-- information for OTUk layers.
+
+-- OTUk config table
+
+optIfOTUkConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfOTUkConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of OTUk configuration information."
+  ::= { optIfOTUk 1 }
+
+optIfOTUkConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfOTUkConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains OTUk configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfOTUkConfigTable 1 }
+
+OptIfOTUkConfigEntry ::=
+  SEQUENCE {
+    optIfOTUkDirectionality              OptIfDirectionality,
+    optIfOTUkBitRateK                    OptIfBitRateK,
+    optIfOTUkTraceIdentifierTransmitted  OptIfTxTI,
+    optIfOTUkDAPIExpected                OptIfExDAPI,
+    optIfOTUkSAPIExpected                OptIfExSAPI,
+    optIfOTUkTraceIdentifierAccepted     OptIfAcTI,
+    optIfOTUkTIMDetMode                  OptIfTIMDetMode,
+    optIfOTUkTIMActEnabled               TruthValue,
+    optIfOTUkDEGThr                      OptIfDEGThr,
+    optIfOTUkDEGM                        OptIfDEGM,
+    optIfOTUkSinkAdaptActive             TruthValue,
+    optIfOTUkSourceAdaptActive           TruthValue,
+    optIfOTUkSinkFECEnabled              TruthValue,
+    optIfOTUkCurrentStatus               BITS
+    }
+
+optIfOTUkDirectionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity."
+  ::= { optIfOTUkConfigEntry 1 }
+
+optIfOTUkBitRateK OBJECT-TYPE
+  SYNTAX  OptIfBitRateK
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the bit rate of the entity."
+  ::= { optIfOTUkConfigEntry 2 }
+
+optIfOTUkTraceIdentifierTransmitted OBJECT-TYPE
+  SYNTAX  OptIfTxTI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The trace identifier transmitted.
+     This object is applicable when optIfOTUkDirectionality
+     has the value source(2) or bidirectional(3).  It must not
+     be instantiated in rows where optIfOTUkDirectionality
+     has the value sink(1).
+     If no value is ever set by a management entity for this
+     object, system-specific default value will be used.
+     Any implementation that instantiates this object must
+     document the system-specific default value or how it
+     is derived."
+  ::= { optIfOTUkConfigEntry 3 }
+
+optIfOTUkDAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExDAPI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The DAPI expected by the receiver.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     This object has no effect when optIfOTUkTIMDetMode has
+     the value off(1)."
+  ::= { optIfOTUkConfigEntry 4 }
+
+optIfOTUkSAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExSAPI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The SAPI expected by the receiver.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     This object has no effect when optIfOTUkTIMDetMode has
+     the value off(1)."
+  ::= { optIfOTUkConfigEntry 5 }
+
+optIfOTUkTraceIdentifierAccepted OBJECT-TYPE
+  SYNTAX  OptIfAcTI
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The actual trace identifier accepted.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     The value of this object is unspecified when
+     optIfOTUkCurrentStatus indicates a near-end defect
+     (i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
+     extraction of the trace message."
+  ::= { optIfOTUkConfigEntry 6 }
+
+optIfOTUkTIMDetMode OBJECT-TYPE
+  SYNTAX  OptIfTIMDetMode
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     The default value of this object is off(1)."
+  ::= { optIfOTUkConfigEntry 7 }
+
+optIfOTUkTIMActEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the Trace Identifier Mismatch (TIM)
+     Consequent Action function is enabled.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     This object has no effect when optIfOTUkTIMDetMode has
+     the value off(1).
+     The default value of this object is false(2)."
+  ::= { optIfOTUkConfigEntry 8 }
+
+optIfOTUkDEGThr OBJECT-TYPE
+  SYNTAX  OptIfDEGThr
+  UNITS   "percentage"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a performance
+     monitoring (PM) Second to be bad.  A PM Second is declared bad if
+     the percentage of detected errored blocks in that second is
+
+     greater than or equal to optIfOTUkDEGThr.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     The default value of this object is Severely Errored Second
+     (SES) Estimator (See ITU-T G.7710)."
+  ::= { optIfOTUkConfigEntry 9 }
+
+optIfOTUkDEGM OBJECT-TYPE
+  SYNTAX  OptIfDEGM
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a Degraded Signal
+     defect (dDEG).  A dDEG shall be declared if optIfOTUkDEGM
+     consecutive bad PM Seconds are detected.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     The default value of this object is 7 (See ITU-T G.7710)."
+  ::= { optIfOTUkConfigEntry 10 }
+
+optIfOTUkSinkAdaptActive OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the sink adaptation function is activated or
+     not.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     The default value of this object is false(2)."
+  ::= { optIfOTUkConfigEntry 11 }
+
+optIfOTUkSourceAdaptActive OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the source adaptation function is activated or
+     not.
+     This object is only applicable to the source function, i.e.,
+     only when optIfOTUkDirectionality has the value source(2)
+     or bidirectional(3).  It must not be instantiated in rows
+
+     where optIfOTUkDirectionality has the value sink(1).
+     The default value of this object is false(2)."
+  ::= { optIfOTUkConfigEntry 12 }
+
+optIfOTUkSinkFECEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "If Forward Error Correction (FEC) is supported, this object
+     indicates whether FEC at the OTUk sink adaptation function is
+     enabled or not.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2).
+     The default value of this object is true(1)."
+  ::= { optIfOTUkConfigEntry 13 }
+
+optIfOTUkCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    tim(0),
+    deg(1),
+    bdi(2),
+    ssf(3),
+    lof(4),
+    ais(5),
+    lom(6)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfOTUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfOTUkDirectionality has the value source(2)."
+  ::= { optIfOTUkConfigEntry 14 }
+
+-- GCC0 config table
+
+optIfGCC0ConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfGCC0ConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of GCC0 configuration information."
+  ::= { optIfOTUk 2 }
+
+optIfGCC0ConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfGCC0ConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains GCC0 configuration
+     information of an interface.  Each instance must
+     correspond to an instance of optIfOTUkConfigEntry.
+     Separate source and/or sink instances may exist
+     for a given ifIndex value, or a single bidirectional
+     instance may exist, but a bidirectional instance may
+     not coexist with a source or sink instance.
+     Instances of this conceptual row persist across
+     agent restarts."
+  INDEX  { ifIndex, optIfGCC0Directionality }
+  ::= { optIfGCC0ConfigTable 1 }
+
+OptIfGCC0ConfigEntry ::=
+  SEQUENCE {
+    optIfGCC0Directionality            OptIfDirectionality,
+    optIfGCC0Application               SnmpAdminString,
+    optIfGCC0RowStatus                 RowStatus
+    }
+
+optIfGCC0Directionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity.
+     The values source(2) and bidirectional(3) are
+     not allowed if the corresponding instance of
+     optIfOTUkDirectionality has the value sink(1).
+     The values sink(1) and bidirectional(3) are
+     not allowed if the corresponding instance of
+     optIfOTUkDirectionality has the value source(2)."
+  ::= { optIfGCC0ConfigEntry 1 }
+
+optIfGCC0Application OBJECT-TYPE
+  SYNTAX  SnmpAdminString
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the application transported by the GCC0 entity.
+     Example applications are ECC, User data channel.
+
+     The value of this object may not be changed when
+     optIfGCC0RowStatus has the value active(1)."
+  ::= { optIfGCC0ConfigEntry 2 }
+
+optIfGCC0RowStatus OBJECT-TYPE
+  SYNTAX  RowStatus
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This columnar object is used for creating and deleting a
+     conceptual row of the optIfGCC0 config table.
+     It is used to model the addGCC0Access and removeGCC0Access
+     operations of an OTUk_TTP for GCC0 access control as defined
+     in G.874.1.  Setting RowStatus to createAndGo or createAndWait
+     implies addGCC0Access.  Setting RowStatus to destroy implies
+     removeGCC0Access."
+  ::= { optIfGCC0ConfigEntry 3 }
+
+-- the optIfODUk group
+-- This group handles the configuration information
+-- for the ODUk layers.
+
+-- ODUk config table
+
+optIfODUkConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfODUkConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of ODUk configuration information."
+  ::= { optIfODUk 1 }
+
+optIfODUkConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfODUkConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains ODUk configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfODUkConfigTable 1 }
+
+OptIfODUkConfigEntry ::=
+  SEQUENCE {
+    optIfODUkDirectionality              OptIfDirectionality,
+    optIfODUkBitRateK                    OptIfBitRateK,
+    optIfODUkTcmFieldsInUse              BITS,
+    optIfODUkPositionSeqCurrentSize      Unsigned32,
+    optIfODUkTtpPresent                  TruthValue
+    }
+
+optIfODUkDirectionality OBJECT-TYPE
+  SYNTAX  OptIfDirectionality
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the entity."
+  ::= { optIfODUkConfigEntry 1 }
+
+optIfODUkBitRateK OBJECT-TYPE
+  SYNTAX  OptIfBitRateK
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the bit rate of the entity."
+  ::= { optIfODUkConfigEntry 2 }
+
+optIfODUkTcmFieldsInUse OBJECT-TYPE
+  SYNTAX  BITS {
+    tcmField1(0),
+    tcmField2(1),
+    tcmField3(2),
+    tcmField4(3),
+    tcmField5(4),
+    tcmField6(5)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the TCM field(s) that are currently in use.
+     The positions of the bits correspond to the TCM fields.
+     A bit that is set to 1 means that the corresponding TCM
+     field is used.  This object will be updated when rows are
+     created in or deleted from the optIfODUkTConfigTable, or
+     the optIfODUkTNimConfigTable."
+  ::= { optIfODUkConfigEntry 3 }
+
+optIfODUkPositionSeqCurrentSize OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This variable indicates the current size of the position
+     sequence (i.e., number of TCM function and/or GCC12
+     access that have been created in the ODUk interface).
+     When the value of this variable is greater than zero,
+     it means that one or more TCM function and/or GCC12
+     access have been created in the ODUk interface.  In this
+     case, there will be as many rows in the
+
+     optIfODUkPositionSeqTable as the value of
+     optIfODUkPositionSeqCurrentSize  corresponding to this
+     ODUk interface, one row for each TCM function or GCC12
+     access.  The position of the TCM function and/or
+     GCC12 access within the sequence is indicated by the
+     optIfODUkPositionSeqPosition variable in
+     optIfODUkPositionSeqTable.
+     The optIfODUkPositionSeqTable also provides pointers
+     to the corresponding TCM function (optIfODUkT) and
+     GCC12 access (optIfGCC12) entities."
+  ::= { optIfODUkConfigEntry 4 }
+
+optIfODUkTtpPresent OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This object has the value true(1) if the ifEntry under which
+     it is instantiated contains an ODUk Trail Termination Point,
+     i.e., is the endpoint of an ODUk path.  In that case there
+     will be a corresponding row in the ODUk TTP config table and
+     it will not be possible to create corresponding rows in the
+     ODUk NIM config table.  This object has the value false(2)
+     if the ifEntry under which it is instantiated contains an
+     intermediate ODUk Connection Termination Point.  In that case
+     there is no corresponding row in the ODUk TTP config table,
+     but it will be possible to create corresponding rows in the
+     ODUk NIM config table.  This object also affects the allowable
+     options in rows created in the GCC12 config table and in the
+     ODUkT config table, as specified in the DESCRIPTION clauses
+     of the columns in those tables."
+  ::= { optIfODUkConfigEntry 5 }
+
+-- ODUk Trail Termination Point (TTP) config table
+
+optIfODUkTtpConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfODUkTtpConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of ODUk TTP configuration information."
+  ::= { optIfODUk 2 }
+
+optIfODUkTtpConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfODUkTtpConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains ODUk TTP configuration
+     information of an interface."
+  INDEX  { ifIndex }
+  ::= { optIfODUkTtpConfigTable 1 }
+
+OptIfODUkTtpConfigEntry ::=
+  SEQUENCE {
+    optIfODUkTtpTraceIdentifierTransmitted  OptIfTxTI,
+    optIfODUkTtpDAPIExpected                OptIfExDAPI,
+    optIfODUkTtpSAPIExpected                OptIfExSAPI,
+    optIfODUkTtpTraceIdentifierAccepted     OptIfAcTI,
+    optIfODUkTtpTIMDetMode                  OptIfTIMDetMode,
+    optIfODUkTtpTIMActEnabled               TruthValue,
+    optIfODUkTtpDEGThr                      OptIfDEGThr,
+    optIfODUkTtpDEGM                        OptIfDEGM,
+    optIfODUkTtpCurrentStatus               BITS
+    }
+
+optIfODUkTtpTraceIdentifierTransmitted OBJECT-TYPE
+  SYNTAX  OptIfTxTI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The trace identifier transmitted.
+     This object is applicable when optIfODUkDirectionality
+     has the value source(2) or bidirectional(3).  It must not
+     be instantiated in rows where optIfODUkDirectionality
+     has the value sink(1).
+     If no value is ever set by a management entity for this
+     object, system-specific default value will be used.
+     Any implementation that instantiates this object must
+     document the system-specific default value or how it
+     is derived."
+  ::= { optIfODUkTtpConfigEntry 1 }
+
+optIfODUkTtpDAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExDAPI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The DAPI expected by the receiver.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     This object has no effect when optIfODUkTtpTIMDetMode has
+     the value off(1)."
+  ::= { optIfODUkTtpConfigEntry 2 }
+
+optIfODUkTtpSAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExSAPI
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "The SAPI expected by the receiver.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     This object has no effect when optIfODUkTtpTIMDetMode has
+     the value off(1)."
+  ::= { optIfODUkTtpConfigEntry 3 }
+
+optIfODUkTtpTraceIdentifierAccepted OBJECT-TYPE
+  SYNTAX  OptIfAcTI
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The actual trace identifier accepted.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     The value of this object is unspecified when
+     optIfODUkTtpCurrentStatus indicates a near-end defect
+     (i.e., oci(0), lck(1), ssf(5)) that prevents extraction
+     of the trace message."
+  ::= { optIfODUkTtpConfigEntry 4 }
+
+optIfODUkTtpTIMDetMode OBJECT-TYPE
+  SYNTAX  OptIfTIMDetMode
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     The default value of this object is off(1)."
+  ::= { optIfODUkTtpConfigEntry 5 }
+
+optIfODUkTtpTIMActEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the Trace Identifier Mismatch (TIM)
+     Consequent Action function is enabled.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     This object has no effect when optIfODUkTtpTIMDetMode has
+     the value off(1).
+     The default value of this object is false(2)."
+  ::= { optIfODUkTtpConfigEntry 6 }
+
+optIfODUkTtpDEGThr OBJECT-TYPE
+  SYNTAX  OptIfDEGThr
+  UNITS   "percentage"
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a performance
+     monitoring (PM) Second to be bad.  A PM Second is declared bad if
+     the percentage of detected errored blocks in that second is
+     greater than or equal to optIfODUkDEGThr.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     The default value of this object is Severely Errored Second
+     (SES) Estimator (See ITU-T G.7710)."
+  ::= { optIfODUkTtpConfigEntry 7 }
+
+optIfODUkTtpDEGM OBJECT-TYPE
+  SYNTAX  OptIfDEGM
+  MAX-ACCESS  read-write
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a Degraded Signal
+     defect (dDEG).  A dDEG shall be declared if optIfODUkDEGM
+     consecutive bad PM Seconds are detected.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2).
+     The default value of this object is 7 (See ITU-T G.7710)."
+  ::= { optIfODUkTtpConfigEntry 8 }
+
+optIfODUkTtpCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    oci(0),
+    lck(1),
+    tim(2),
+    deg(3),
+    bdi(4),
+    ssf(5)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     This object is only applicable to the sink function, i.e.,
+     only when optIfODUkDirectionality has the value sink(1)
+     or bidirectional(3).  It must not be instantiated in rows
+     where optIfODUkDirectionality has the value source(2)."
+  ::= { optIfODUkTtpConfigEntry 9 }
+
+-- ODUk Position Sequence table
+
+optIfODUkPositionSeqTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfODUkPositionSeqEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of ODUk Position Sequence information."
+  ::= { optIfODUk 3 }
+
+optIfODUkPositionSeqEntry OBJECT-TYPE
+  SYNTAX  OptIfODUkPositionSeqEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains ODUk position sequence
+     information of an ODUk interface.  The ODUk interface
+     is identified by the ifIndex.  Associated with each
+     ODUk interface there may be one of more conceptual
+     rows in the optIfODUkPositionSeqTable.  Each row
+     represents a TCM or GCC12 access function within the
+     associated ODUk interface.  Rows of the
+     optIfODUkPositionSeqTable table are created/deleted
+     as the result of the creation/deletion of the optIfODUkT
+     or optIfGCC12 entities."
+  INDEX  { ifIndex, optIfODUkPositionSeqIndex }
+  ::= { optIfODUkPositionSeqTable 1 }
+
+OptIfODUkPositionSeqEntry ::=
+  SEQUENCE {
+    optIfODUkPositionSeqIndex            Unsigned32,
+    optIfODUkPositionSeqPosition         Unsigned32,
+    optIfODUkPositionSeqPointer          RowPointer
+    }
+
+optIfODUkPositionSeqIndex OBJECT-TYPE
+  SYNTAX  Unsigned32 (1..4294967295)
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This variable identifies a row in the
+     optIfODUkPositionSeqTable Table.
+     Each row of the optIfODUkPositionSeqTable Table
+     represents a TCM or GCC12 access function within the
+     associated ODUk interface."
+  ::= { optIfODUkPositionSeqEntry 1 }
+
+optIfODUkPositionSeqPosition OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This variable indicates the position of the TCM or
+     GCC12 access function within the sequence of TCMs &
+     GCC12 access functions of the associated ODUk
+     interface.  The TCM or GCC12 presented by this row is
+     referenced by the optIfODUkPositionSeqPointer variable."
+  ::= { optIfODUkPositionSeqEntry 2 }
+
+optIfODUkPositionSeqPointer OBJECT-TYPE
+  SYNTAX  RowPointer
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "This variable identifies the TCM or GCC12 access function
+     by pointing to the corresponding optIfODUkT or optIfGCC12
+     entity."
+  ::= { optIfODUkPositionSeqEntry 3 }
+
+-- ODUk Non-intrusive monitoring (Nim) config table
+
+optIfODUkNimConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfODUkNimConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of ODUkNim configuration information."
+  ::= { optIfODUk 4 }
+
+optIfODUkNimConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfODUkNimConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains ODUkNim configuration
+     information of an interface.  Each instance must
+     correspond to an instance of optIfODUkConfigEntry
+     for which optIfODUkTtpPresent has the value false(2).
+
+     Instances of this conceptual row persist across
+     agent restarts, and read-create columns other
+     than the status column may be modified while the
+     row is active."
+  INDEX  { ifIndex, optIfODUkNimDirectionality }
+  ::= { optIfODUkNimConfigTable 1 }
+
+OptIfODUkNimConfigEntry ::=
+  SEQUENCE {
+    optIfODUkNimDirectionality              OptIfSinkOrSource,
+    optIfODUkNimDAPIExpected                OptIfExDAPI,
+    optIfODUkNimSAPIExpected                OptIfExSAPI,
+    optIfODUkNimTraceIdentifierAccepted     OptIfAcTI,
+    optIfODUkNimTIMDetMode                  OptIfTIMDetMode,
+    optIfODUkNimTIMActEnabled               TruthValue,
+    optIfODUkNimDEGThr                      OptIfDEGThr,
+    optIfODUkNimDEGM                        OptIfDEGM,
+    optIfODUkNimCurrentStatus               BITS,
+    optIfODUkNimRowStatus                   RowStatus
+    }
+
+optIfODUkNimDirectionality OBJECT-TYPE
+  SYNTAX  OptIfSinkOrSource
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Specifies the monitor point for the ODUk Path non-intrusive
+     monitoring function.  The value source(2) is not allowed
+     if the corresponding instance of optIfODUkDirectionality
+     has the value sink(1), and the value sink(1) is not allowed
+     if the corresponding instance of optIfODUkDirectionality
+     has the value source(2).  Either the value sink(1) or
+     source(2) is allowed if the corresponding instance of
+     optIfODUkDirectionality has the value bidirectional(3).
+
+     The value sink(1) means monitoring at the sink direction
+     path signal of the ODUk CTP.
+
+     The value source(2) means monitoring at the source direction
+
+     path signal of the ODUk CTP.  Monitoring the source direction
+     of an ODUk CTP is necessary in those cases where the ODUk CTP
+     is at an SNCP (Subnetwork Connection Protection) end (e.g., see
+     Figure I.1.2/G.874.1).  If one would like to get the performance
+     of the protected connection, one cannot use the NIM function
+     at both ODUk CTP sinks (before the matrix), instead one should
+     monitor the signal at the source ODUk CTP after the matrix."
+  ::= { optIfODUkNimConfigEntry 1 }
+
+optIfODUkNimDAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExDAPI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The DAPI expected by the receiver.
+     This object has no effect if optIfODUkNimTIMDetMode has
+     the value off(1) or sapi(3)."
+  ::= { optIfODUkNimConfigEntry 2 }
+
+optIfODUkNimSAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExSAPI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The SAPI expected by the receiver.
+     This object has no effect if optIfODUkNimTIMDetMode has
+     the value off(1) or dapi(2)."
+  ::= { optIfODUkNimConfigEntry 3 }
+
+optIfODUkNimTraceIdentifierAccepted OBJECT-TYPE
+  SYNTAX  OptIfAcTI
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The actual trace identifier accepted.  The value of
+     this object is unspecified if optIfODUkNimCurrentStatus
+     has any of the bit positions oci(0), lck(1), or ssf(5)
+     set or if optIfODUkNimRowStatus has any value other
+     than active(1)."
+  ::= { optIfODUkNimConfigEntry 4 }
+
+optIfODUkNimTIMDetMode OBJECT-TYPE
+  SYNTAX  OptIfTIMDetMode
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function."
+  ::= { optIfODUkNimConfigEntry 5 }
+
+optIfODUkNimTIMActEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the Trace Identifier Mismatch (TIM)
+     Consequent Action function is enabled."
+  ::= { optIfODUkNimConfigEntry 6 }
+
+optIfODUkNimDEGThr OBJECT-TYPE
+  SYNTAX  OptIfDEGThr
+  UNITS   "percentage"
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a performance
+     monitoring (PM) Second to be bad.  A PM Second is declared bad
+     if the percentage of detected errored blocks in that second is
+     greater than or equal to optIfODUkNimDEGThr."
+  ::= { optIfODUkNimConfigEntry 7 }
+
+optIfODUkNimDEGM OBJECT-TYPE
+  SYNTAX  OptIfDEGM
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a Degraded Signal
+     defect (dDEG).  A dDEG shall be declared if optIfODUkNimDEGM
+     consecutive bad PM Seconds are detected."
+  ::= { optIfODUkNimConfigEntry 8 }
+
+optIfODUkNimCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    oci(0),
+    lck(1),
+    tim(2),
+    deg(3),
+    bdi(4),
+    ssf(5)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if
+     any.  The value of this object is unspecified if
+     optIfODUkNimRowStatus has any value other than
+
+     active(1)."
+  ::= { optIfODUkNimConfigEntry 9 }
+
+optIfODUkNimRowStatus OBJECT-TYPE
+  SYNTAX  RowStatus
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This columnar object is used for creating and deleting
+     a conceptual row of the optIfODUkNim config table.
+     It is used to model the activateNim and deactivateNim
+     operations of an OTUk_CTP for non-intrusive monitoring
+     control as defined in G.874.1.  Setting RowStatus to
+     createAndGo or createAndWait implies activateNim.
+     Setting RowStatus to destroy implies deactivateNim."
+  ::= { optIfODUkNimConfigEntry 10 }
+
+-- GCC12 config table
+
+optIfGCC12ConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfGCC12ConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of GCC12 configuration information.
+     The GCC function processes the GCC overhead bytes passing
+     through them but leave the remainder of the ODUk overhead
+     and payload data alone."
+  ::= { optIfODUk 5 }
+
+optIfGCC12ConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfGCC12ConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains GCC12 configuration
+     information of an interface.  Each instance must
+     correspond to an instance of optIfODUkConfigEntry.
+     Separate instances providing GCC1-only access and
+     GCC2-only access may exist for a given ifIndex value,
+     or a single instance providing GCC1 + GCC2 may exist,
+     but a GCC1 + GCC2 instance may not coexist with a
+     GCC1-only or GCC2-only instance.
+
+     Instances of this conceptual row persist across agent
+     restarts."
+  INDEX  { ifIndex, optIfGCC12Codirectional, optIfGCC12GCCAccess }
+  ::= { optIfGCC12ConfigTable 1 }
+
+OptIfGCC12ConfigEntry ::=
+  SEQUENCE {
+    optIfGCC12Codirectional      TruthValue,
+    optIfGCC12GCCAccess          INTEGER,
+    optIfGCC12GCCPassThrough     TruthValue,
+    optIfGCC12Application        SnmpAdminString,
+    optIfGCC12RowStatus          RowStatus
+    }
+
+optIfGCC12Codirectional OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the GCC12 termination with
+     respect to the associated ODUk CTP.  The value true(1) means
+     that the sink part of the GCC12 extracts COMMS data from the
+     signal at the input to the ODUk CTP sink and the source part
+     of the GCC12 inserts COMMS data into the signal at the output
+     of the ODUk CTP source.  The value false(2) means that the
+     sink part of the GCC12 extracts COMMS data from the signal at
+     the output of the ODUk CTP source and the source part of the
+     GCC12 inserts COMMS data into the signal at the input of the
+     ODUk CTP sink.  This attribute may assume either value when
+     the corresponding instance of optIfODUkTtpPresent has the
+     value false(2).  When the value of the corresponding instance
+     of optIfODUkTtpPresent is true(1) then the only value allowed
+     for this attribute is true(1)."
+  ::= { optIfGCC12ConfigEntry 1 }
+
+optIfGCC12GCCAccess OBJECT-TYPE
+  SYNTAX  INTEGER {
+     gcc1 (1),
+     gcc2 (2),
+     gcc1and2 (3)
+   }
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Indicates the GCC access represented by the entity."
+  ::= { optIfGCC12ConfigEntry 2 }
+
+optIfGCC12GCCPassThrough OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Controls whether the selected GCC overhead bytes are passed
+
+     through or modified.  The value true(1) means that the selected
+     GCC overhead bytes are passed through unmodified from the ODUk
+     CTP input to the ODUk CTP output.  The value false(2) means that
+     the selected GCC overhead bytes are set to zero at the ODUk CTP
+     output after the extraction of the COMMS data.  This object has
+     no effect if the corresponding instance of optIfODUkTtpPresent
+     has the value true(1).
+
+     The value of this object may not be changed when
+     optIfGCC12RowStatus has the value active(1)."
+  ::= { optIfGCC12ConfigEntry 3 }
+
+optIfGCC12Application OBJECT-TYPE
+  SYNTAX  SnmpAdminString
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the application transported by the GCC12 entity.
+     Example applications are ECC, User data channel.
+
+     The value of this object may not be changed when
+     optIfGCC12RowStatus has the value active(1)."
+  ::= { optIfGCC12ConfigEntry 4 }
+
+optIfGCC12RowStatus OBJECT-TYPE
+  SYNTAX  RowStatus
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This columnar object is used for creating and deleting
+     a conceptual row of the optIfGCC12 config table.  It is
+     used to model the addGCC12Access and removeGCC12Access
+     operations of an ODUk_CTP or ODUk_TTP for GCC12 access
+     control as defined in G.874.1.  Setting RowStatus to
+     createAndGo or createAndWait implies addGCC12Access.
+     Setting RowStatus to destroy implies removeGCC12Access.
+     Successful addition/removal of the GCC12 access function
+     will result in updating the
+     optIfODUkPositionSeqCurrentSize variable and the
+     optIfODUkPositionSeqTable table of the associated
+     ODUk entry in the optIfODUkConfigTable."
+  ::= { optIfGCC12ConfigEntry 5 }
+
+-- the optIfODUkT group
+-- This group handles the configuration information
+-- for the ODUkT layers.
+
+-- ODUkT config table
+
+optIfODUkTConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfODUkTConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of ODUkT configuration information."
+  ::= { optIfODUkT 1 }
+
+optIfODUkTConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfODUkTConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains ODUkT configuration
+     information of an interface.  Each instance must
+     correspond to an instance of optIfODUkConfigEntry.
+     Rows in this table are mutually exclusive with rows
+     in the ODUkT NIM config table -- in other words, this
+     row object may not be instantiated for a given pair
+     of ifIndex and TCM field values if a corresponding
+     instance of optIfODUkTNimConfigEntry already exists.
+
+     Instances of this conceptual row persist across agent
+     restarts.  Except where noted otherwise, read-create
+     columns other than the status column may be modified
+     while the row is active."
+  INDEX  { ifIndex, optIfODUkTTcmField, optIfODUkTCodirectional }
+  ::= { optIfODUkTConfigTable 1 }
+
+OptIfODUkTConfigEntry ::=
+  SEQUENCE {
+    optIfODUkTTcmField                    Unsigned32,
+    optIfODUkTCodirectional               TruthValue,
+    optIfODUkTTraceIdentifierTransmitted  OptIfTxTI,
+    optIfODUkTDAPIExpected                OptIfExDAPI,
+    optIfODUkTSAPIExpected                OptIfExSAPI,
+    optIfODUkTTraceIdentifierAccepted     OptIfAcTI,
+    optIfODUkTTIMDetMode                  OptIfTIMDetMode,
+    optIfODUkTTIMActEnabled               TruthValue,
+    optIfODUkTDEGThr                      OptIfDEGThr,
+    optIfODUkTDEGM                        OptIfDEGM,
+    optIfODUkTSinkMode                    INTEGER,
+    optIfODUkTSinkLockSignalAdminState    INTEGER,
+    optIfODUkTSourceLockSignalAdminState  INTEGER,
+    optIfODUkTCurrentStatus               BITS,
+    optIfODUkTRowStatus                   RowStatus
+    }
+
+optIfODUkTTcmField OBJECT-TYPE
+  SYNTAX  Unsigned32 (1..6)
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Indicates the tandem connection monitoring
+     field of the ODUk OH.  Valid values are
+     integers from 1 to 6."
+  ::= { optIfODUkTConfigEntry 1 }
+
+optIfODUkTCodirectional OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Indicates the directionality of the ODUkT termination point with
+     respect to the associated ODUk CTP.  The value true(1) means
+     that the sink part of the ODUkT TP extracts TCM data from the
+     signal at the input to the ODUk CTP sink and the source part
+     of the ODUkT TP inserts TCM data into the signal at the output
+     of the ODUk CTP source.  The value false(2) means that the
+     sink part of the ODUkT TP extracts TCM data from the signal at
+     the output of the ODUk CTP source and the source part of the
+     ODUkT TP inserts TCM data into the signal at the input of the
+     ODUk CTP sink.  This attribute may assume either value when
+     the corresponding instance of optIfODUkTtpPresent has the
+     value false(2).  When the value of the corresponding instance
+     of optIfODUkTtpPresent is true(1) then the only value allowed
+     for this attribute is true(1)."
+  ::= { optIfODUkTConfigEntry 2 }
+
+optIfODUkTTraceIdentifierTransmitted OBJECT-TYPE
+  SYNTAX  OptIfTxTI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The trace identifier transmitted.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value false(2), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value true(1).
+     It must not be instantiated in rows for all other cases."
+  ::= { optIfODUkTConfigEntry 3 }
+
+optIfODUkTDAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExDAPI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The DAPI expected by the receiver.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     This object has no effect when optIfODUkTTIMDetMode has
+     the value off(1)."
+  ::= { optIfODUkTConfigEntry 4 }
+
+optIfODUkTSAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExSAPI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The SAPI expected by the receiver.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     This object has no effect when optIfODUkTTIMDetMode has
+     the value off(1)."
+  ::= { optIfODUkTConfigEntry 5 }
+
+optIfODUkTTraceIdentifierAccepted OBJECT-TYPE
+  SYNTAX  OptIfAcTI
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The actual trace identifier accepted.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     The value of this object is unspecified when
+     optIfODUkTCurrentStatus indicates a near-end defect
+     (i.e., oci(0), lck(1), ssf(5)) that prevents extraction
+
+     of the trace message."
+  ::= { optIfODUkTConfigEntry 6 }
+
+optIfODUkTTIMDetMode OBJECT-TYPE
+  SYNTAX  OptIfTIMDetMode
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     The default value of this object is off(1)."
+  ::= { optIfODUkTConfigEntry 7 }
+
+optIfODUkTTIMActEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the Trace Identifier Mismatch (TIM)
+     Consequent Action function is enabled.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     This object has no effect when optIfODUkTTIMDetMode has
+     the value off(1).
+     The default value of this object is false(2)."
+  ::= { optIfODUkTConfigEntry 8 }
+
+optIfODUkTDEGThr OBJECT-TYPE
+  SYNTAX  OptIfDEGThr
+  UNITS   "percentage"
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a performance
+     monitoring (PM) Second to be bad.  A PM Second is declared bad if
+     the percentage of detected errored blocks in that second is
+
+     greater than or equal to optIfODUkTDEGThr.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     The default value of this object is Severely Errored Second
+     (SES) Estimator (See ITU-T G.7710)."
+  ::= { optIfODUkTConfigEntry 9 }
+
+optIfODUkTDEGM OBJECT-TYPE
+  SYNTAX  OptIfDEGM
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a Degraded Signal
+     defect (dDEG).  A dDEG shall be declared if optIfODUkTDEGM
+     consecutive bad PM Seconds are detected.
+     This object is applicable only to the following three cases.
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases.
+     The default value of this object is 7 (See ITU-T G.7710)."
+  ::= { optIfODUkTConfigEntry 10 }
+
+optIfODUkTSinkMode OBJECT-TYPE
+  SYNTAX  INTEGER  {
+    operational (1),
+    monitor (2)
+    }
+  MAX-ACCESS  read-create
+  STATUS      current
+  DESCRIPTION
+    "This variable specifies the TCM mode at the entity.
+     The value operational(1) means that TCM Overhead (TCMOH)
+     processes (see ITU-T G.798) shall be
+     performed and consequent actions for AIS, Trail
+     Signal Fail (TSF), Trail Signal Degraded (TSD) shall be
+     initiated in case of defects.
+     The value monitor(2) means that TCMOH processes shall be
+     performed but consequent actions for AIS, Trail
+     Server Failure (TSF), Trail Server Degraded (TSD) shall _not_ be
+     initiated in case of defects.
+
+     This object is applicable only when the value of
+     optIfODUkTtpPresent is false(2) and also either one of the
+     following three cases holds:
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases."
+  ::= { optIfODUkTConfigEntry 11 }
+
+optIfODUkTSinkLockSignalAdminState OBJECT-TYPE
+  SYNTAX  INTEGER {
+    locked(1),
+    normal(2)
+    }
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Provides the capability to provision the LOCK signal, which
+     is one of the ODUk maintenance signals, at the ODUKT sink.  When
+     a Tandem Connection endpoint is set to admin state locked,
+     it inserts the ODUk-LCK signal in the sink direction.
+
+     This object is applicable only when the value of
+     optIfODUkTtpPresent is false(2) and also either one of the
+     following three cases holds:
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases."
+  ::= { optIfODUkTConfigEntry 12 }
+
+optIfODUkTSourceLockSignalAdminState OBJECT-TYPE
+  SYNTAX  INTEGER {
+    locked(1),
+    normal(2)
+    }
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Provides the capability to provision the LOCK signal, which
+     is one of the ODUk maintenance signals, at the source.
+     When a Tandem Connection endpoint is set to admin state
+     locked, it inserts the ODUk-LCK signal in the source
+     direction.
+
+     This object is applicable only when either one of the
+     following three cases holds:
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value false(2), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value true(1).
+     It must not be instantiated in rows for all other cases."
+  ::= { optIfODUkTConfigEntry 13 }
+
+optIfODUkTCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    oci(0),
+    lck(1),
+    tim(2),
+    deg(3),
+    bdi(4),
+    ssf(5)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     This object is applicable only when either one of the
+     following three cases holds:
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+     It must not be instantiated in rows for all other cases."
+  ::= { optIfODUkTConfigEntry 14 }
+
+optIfODUkTRowStatus OBJECT-TYPE
+  SYNTAX  RowStatus
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This columnar object is used for creating and deleting a
+     conceptual row of the optIfODUkT config table.
+     It is used to model the addTCM and removeTCM operations of an
+     ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined
+     in ITU-T G.874.1.
+     Setting RowStatus to createAndGo or createAndWait implies addTCM.
+     Setting RowStatus to destroy implies removeTCM.
+     Successful addition/removal of TCM will result in updating the
+     optIfODUkTcmFieldsInUse and optIfODUkPositionSeqCurrentSize
+     variables and the optIfODUkPositionSeqTable table of the
+
+     associated ODUk entry in the optIfODUkConfigTable."
+  ::= { optIfODUkTConfigEntry 15 }
+
+-- ODUkT Non-intrusive monitoring (Nim) config table
+
+optIfODUkTNimConfigTable OBJECT-TYPE
+  SYNTAX  SEQUENCE OF OptIfODUkTNimConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A table of ODUkTNim configuration information."
+  ::= { optIfODUkT 2 }
+
+optIfODUkTNimConfigEntry OBJECT-TYPE
+  SYNTAX  OptIfODUkTNimConfigEntry
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "A conceptual row that contains ODUkTNim configuration
+     information of an interface.  Each instance must
+     correspond to an instance of optIfODUkConfigEntry.
+     Rows in this table are mutually exclusive with rows
+     in the ODUkT config table -- in other words, this
+     row object may not be instantiated for a given pair
+     of ifIndex and TCM field values if a corresponding
+     instance of optIfODUkTConfigEntry already exists.
+
+     Instances of this conceptual row persist across
+     agent restarts, and read-create columns other
+     than the status column may be modified while the
+     row is active."
+  INDEX  {ifIndex, optIfODUkTNimTcmField, optIfODUkTNimDirectionality}
+  ::= { optIfODUkTNimConfigTable 1 }
+
+OptIfODUkTNimConfigEntry ::=
+  SEQUENCE {
+    optIfODUkTNimTcmField                    Unsigned32,
+    optIfODUkTNimDirectionality              OptIfSinkOrSource,
+    optIfODUkTNimDAPIExpected                OptIfExDAPI,
+    optIfODUkTNimSAPIExpected                OptIfExSAPI,
+    optIfODUkTNimTraceIdentifierAccepted     OptIfAcTI,
+    optIfODUkTNimTIMDetMode                  OptIfTIMDetMode,
+    optIfODUkTNimTIMActEnabled               TruthValue,
+    optIfODUkTNimDEGThr                      OptIfDEGThr,
+    optIfODUkTNimDEGM                        OptIfDEGM,
+    optIfODUkTNimCurrentStatus               BITS,
+    optIfODUkTNimRowStatus                   RowStatus
+    }
+
+optIfODUkTNimTcmField OBJECT-TYPE
+  SYNTAX  Unsigned32 (1..6)
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Indicates the tandem connection monitoring
+     field of the ODUk OH on which non-intrusive monitoring
+     is performed.  Valid values are
+     integers from 1 to 6."
+  ::= { optIfODUkTNimConfigEntry 1 }
+
+optIfODUkTNimDirectionality OBJECT-TYPE
+  SYNTAX  OptIfSinkOrSource
+  MAX-ACCESS  not-accessible
+  STATUS  current
+  DESCRIPTION
+    "Specifies the monitor point for the ODUk TCM non-intrusive
+     monitoring function.  The value source(2) is not allowed
+     if the corresponding instance of optIfODUkDirectionality
+     has the value sink(1), and the value sink(1) is not allowed
+     if the corresponding instance of optIfODUkDirectionality
+     has the value source(2).  Either the value sink(1) or
+     source(2) is allowed if the corresponding instance of
+     optIfODUkDirectionality has the value bidirectional(3).
+     The value sink(1) means monitoring at the sink direction
+     TCM signal of the ODUk CTP.
+     The value source(2) means monitoring at the source direction
+     path signal of the ODUk CTP."
+  ::= { optIfODUkTNimConfigEntry 2 }
+
+optIfODUkTNimDAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExDAPI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The DAPI expected by the receiver.
+     This object has no effect if optIfODUkTNimTIMDetMode has
+     the value off(1) or sapi(3)."
+  ::= { optIfODUkTNimConfigEntry 3 }
+
+optIfODUkTNimSAPIExpected OBJECT-TYPE
+  SYNTAX  OptIfExSAPI
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "The SAPI expected by the receiver.
+     This object has no effect if optIfODUkTNimTIMDetMode has
+     the value off(1) or dapi(2)."
+  ::= { optIfODUkTNimConfigEntry 4 }
+
+optIfODUkTNimTraceIdentifierAccepted OBJECT-TYPE
+  SYNTAX  OptIfAcTI
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "The actual trace identifier accepted.  The value of
+     this object is unspecified if optIfODUkTNimCurrentStatus
+     has any of the bit positions oci(0), lck(1), or ssf(5)
+     set or if optIfODUkTNimRowStatus has any value other
+     than active(1)."
+  ::= { optIfODUkTNimConfigEntry 5 }
+
+optIfODUkTNimTIMDetMode OBJECT-TYPE
+  SYNTAX  OptIfTIMDetMode
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the mode of the Trace Identifier Mismatch (TIM)
+     Detection function."
+  ::= { optIfODUkTNimConfigEntry 6 }
+
+optIfODUkTNimTIMActEnabled OBJECT-TYPE
+  SYNTAX  TruthValue
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates whether the Trace Identifier Mismatch (TIM)
+     Consequent Action function is enabled."
+  ::= { optIfODUkTNimConfigEntry 7 }
+
+optIfODUkTNimDEGThr OBJECT-TYPE
+  SYNTAX  OptIfDEGThr
+  UNITS   "percentage"
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a performance
+     monitoring (PM) Second to be bad.  A PM Second is declared bad if
+     the percentage of detected errored blocks in that second is
+     greater than or equal to optIfODUkTNimDEGThr."
+  ::= { optIfODUkTNimConfigEntry 8 }
+
+optIfODUkTNimDEGM OBJECT-TYPE
+  SYNTAX  OptIfDEGM
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "Indicates the threshold level for declaring a Degraded Signal
+     defect (dDEG).  A dDEG shall be declared if optIfODUkTNimDEGM
+     consecutive bad PM Seconds are detected."
+  ::= { optIfODUkTNimConfigEntry 9 }
+
+optIfODUkTNimCurrentStatus OBJECT-TYPE
+  SYNTAX  BITS {
+    oci(0),
+    lck(1),
+    tim(2),
+    deg(3),
+    bdi(4),
+    ssf(5)
+    }
+  MAX-ACCESS  read-only
+  STATUS  current
+  DESCRIPTION
+    "Indicates the defect condition of the entity, if any.
+     The value of this object is unspecified if
+     optIfODUkTNimRowStatus has any value other than
+     active(1)."
+  ::= { optIfODUkTNimConfigEntry 10 }
+
+optIfODUkTNimRowStatus OBJECT-TYPE
+  SYNTAX  RowStatus
+  MAX-ACCESS  read-create
+  STATUS  current
+  DESCRIPTION
+    "This columnar object is used for creating and deleting a
+     conceptual row of the optIfODUkTNim config table.
+     It is used to model the addTCM and removeTCM operations of an
+     ODUk_CTP or ODUk_TTP for non-intrusive Tandem connection
+     monitoring as defined in ITU-T G.874.1.
+     Setting RowStatus to createAndGo or createAndWait implies addTCM.
+     Setting RowStatus to destroy implies removeTCM.
+     Successful addition/removal of Nim TCM will result in updating
+     the optIfODUkPositionSeqCurrentSize variable and the
+     optIfODUkPositionSeqTable table of the associated ODUk entry
+     in the optIfODUkConfigTable."
+  ::= { optIfODUkTNimConfigEntry 11 }
+
+-- units of conformance
+
+optIfOTMnGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTMnOrder,
+    optIfOTMnReduced,
+    optIfOTMnBitRates,
+    optIfOTMnInterfaceType,
+    optIfOTMnTcmMax,
+    optIfOTMnOpticalReach
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of OTMn structure information objects."
+  ::= { optIfGroups 1 }
+
+optIfPerfMonGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfPerfMonCurrentTimeElapsed,
+    optIfPerfMonCurDayTimeElapsed,
+    optIfPerfMonIntervalNumIntervals,
+    optIfPerfMonIntervalNumInvalidIntervals
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of performance monitoring interval objects."
+  ::= { optIfGroups 2 }
+
+optIfOTSnCommonGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnDirectionality
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OTSn interfaces."
+  ::= { optIfGroups 3 }
+
+optIfOTSnSourceGroupFull OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnTraceIdentifierTransmitted
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to full-functionality/IaDI OTSn
+     interfaces that support source functions."
+  ::= { optIfGroups 4 }
+
+optIfOTSnAPRStatusGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnAprStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of objects applicable to
+     OTSn interfaces that support Automatic
+     Power Reduction functions."
+  ::= { optIfGroups 5 }
+
+optIfOTSnAPRControlGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnAprControl
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of objects applicable to
+     OTSn interfaces that provide Automatic
+     Power Reduction control functions."
+  ::= { optIfGroups 6 }
+
+optIfOTSnSinkGroupBasic OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnCurrentStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OTSn interfaces that
+     support sink functions."
+  ::= { optIfGroups 7 }
+
+optIfOTSnSinkGroupFull OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnDAPIExpected,
+    optIfOTSnSAPIExpected,
+    optIfOTSnTraceIdentifierAccepted,
+    optIfOTSnTIMDetMode,
+    optIfOTSnTIMActEnabled
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to full-functionality/IaDI OTSn
+     interfaces that support sink functions."
+  ::= { optIfGroups 8 }
+
+optIfOTSnSinkPreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnSinkCurrentSuspectedFlag,
+    optIfOTSnSinkCurrentInputPower,
+    optIfOTSnSinkCurrentLowInputPower,
+    optIfOTSnSinkCurrentHighInputPower,
+    optIfOTSnSinkCurrentOutputPower,
+    optIfOTSnSinkCurrentLowOutputPower,
+    optIfOTSnSinkCurrentHighOutputPower,
+    optIfOTSnSinkIntervalSuspectedFlag,
+    optIfOTSnSinkIntervalLastInputPower,
+    optIfOTSnSinkIntervalLowInputPower,
+    optIfOTSnSinkIntervalHighInputPower,
+    optIfOTSnSinkIntervalLastOutputPower,
+    optIfOTSnSinkIntervalLowOutputPower,
+    optIfOTSnSinkIntervalHighOutputPower,
+    optIfOTSnSinkCurDaySuspectedFlag,
+    optIfOTSnSinkCurDayLowInputPower,
+    optIfOTSnSinkCurDayHighInputPower,
+    optIfOTSnSinkCurDayLowOutputPower,
+    optIfOTSnSinkCurDayHighOutputPower,
+    optIfOTSnSinkPrevDaySuspectedFlag,
+    optIfOTSnSinkPrevDayLastInputPower,
+    optIfOTSnSinkPrevDayLowInputPower,
+    optIfOTSnSinkPrevDayHighInputPower,
+    optIfOTSnSinkPrevDayLastOutputPower,
+    optIfOTSnSinkPrevDayLowOutputPower,
+    optIfOTSnSinkPrevDayHighOutputPower
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OTSn interfaces that
+     support sink functions."
+  ::= { optIfGroups 9 }
+
+optIfOTSnSinkPreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnSinkCurrentLowerInputPowerThreshold,
+    optIfOTSnSinkCurrentUpperInputPowerThreshold,
+    optIfOTSnSinkCurrentLowerOutputPowerThreshold,
+    optIfOTSnSinkCurrentUpperOutputPowerThreshold
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OTSn interfaces
+     that support sink functions."
+  ::= { optIfGroups 10 }
+
+optIfOTSnSourcePreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnSrcCurrentSuspectedFlag,
+    optIfOTSnSrcCurrentOutputPower,
+    optIfOTSnSrcCurrentLowOutputPower,
+    optIfOTSnSrcCurrentHighOutputPower,
+    optIfOTSnSrcCurrentInputPower,
+    optIfOTSnSrcCurrentLowInputPower,
+    optIfOTSnSrcCurrentHighInputPower,
+    optIfOTSnSrcIntervalSuspectedFlag,
+    optIfOTSnSrcIntervalLastOutputPower,
+    optIfOTSnSrcIntervalLowOutputPower,
+    optIfOTSnSrcIntervalHighOutputPower,
+    optIfOTSnSrcIntervalLastInputPower,
+    optIfOTSnSrcIntervalLowInputPower,
+    optIfOTSnSrcIntervalHighInputPower,
+    optIfOTSnSrcCurDaySuspectedFlag,
+    optIfOTSnSrcCurDayLowOutputPower,
+    optIfOTSnSrcCurDayHighOutputPower,
+    optIfOTSnSrcCurDayLowInputPower,
+    optIfOTSnSrcCurDayHighInputPower,
+    optIfOTSnSrcPrevDaySuspectedFlag,
+    optIfOTSnSrcPrevDayLastOutputPower,
+    optIfOTSnSrcPrevDayLowOutputPower,
+    optIfOTSnSrcPrevDayHighOutputPower,
+    optIfOTSnSrcPrevDayLastInputPower,
+    optIfOTSnSrcPrevDayLowInputPower,
+    optIfOTSnSrcPrevDayHighInputPower
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OTSn interfaces that
+     support source functions."
+  ::= { optIfGroups 11 }
+
+optIfOTSnSourcePreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTSnSrcCurrentLowerOutputPowerThreshold,
+    optIfOTSnSrcCurrentUpperOutputPowerThreshold,
+    optIfOTSnSrcCurrentLowerInputPowerThreshold,
+    optIfOTSnSrcCurrentUpperInputPowerThreshold
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OTSn interfaces
+     that support source functions."
+  ::= { optIfGroups 12 }
+
+optIfOMSnCommonGroup OBJECT-GROUP
+
+  OBJECTS  {
+    optIfOMSnDirectionality
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OMSn interfaces."
+  ::= { optIfGroups 13 }
+
+optIfOMSnSinkGroupBasic OBJECT-GROUP
+  OBJECTS  {
+    optIfOMSnCurrentStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OMSn interfaces that
+     support sink functions."
+  ::= { optIfGroups 14 }
+
+optIfOMSnSinkPreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOMSnSinkCurrentSuspectedFlag,
+    optIfOMSnSinkCurrentAggregatedInputPower,
+    optIfOMSnSinkCurrentLowAggregatedInputPower,
+    optIfOMSnSinkCurrentHighAggregatedInputPower,
+    optIfOMSnSinkCurrentOutputPower,
+    optIfOMSnSinkCurrentLowOutputPower,
+    optIfOMSnSinkCurrentHighOutputPower,
+    optIfOMSnSinkIntervalSuspectedFlag,
+    optIfOMSnSinkIntervalLastAggregatedInputPower,
+    optIfOMSnSinkIntervalLowAggregatedInputPower,
+    optIfOMSnSinkIntervalHighAggregatedInputPower,
+    optIfOMSnSinkIntervalLastOutputPower,
+    optIfOMSnSinkIntervalLowOutputPower,
+    optIfOMSnSinkIntervalHighOutputPower,
+    optIfOMSnSinkCurDaySuspectedFlag,
+    optIfOMSnSinkCurDayLowAggregatedInputPower,
+    optIfOMSnSinkCurDayHighAggregatedInputPower,
+    optIfOMSnSinkCurDayLowOutputPower,
+    optIfOMSnSinkCurDayHighOutputPower,
+    optIfOMSnSinkPrevDaySuspectedFlag,
+    optIfOMSnSinkPrevDayLastAggregatedInputPower,
+    optIfOMSnSinkPrevDayLowAggregatedInputPower,
+    optIfOMSnSinkPrevDayHighAggregatedInputPower,
+    optIfOMSnSinkPrevDayLastOutputPower,
+    optIfOMSnSinkPrevDayLowOutputPower,
+    optIfOMSnSinkPrevDayHighOutputPower
+
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OMSn interfaces that
+     support sink functions."
+  ::= { optIfGroups 15 }
+
+optIfOMSnSinkPreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOMSnSinkCurrentLowerInputPowerThreshold,
+    optIfOMSnSinkCurrentUpperInputPowerThreshold,
+    optIfOMSnSinkCurrentLowerOutputPowerThreshold,
+    optIfOMSnSinkCurrentUpperOutputPowerThreshold
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OMSn interfaces
+     that support sink functions."
+  ::= { optIfGroups 16 }
+
+optIfOMSnSourcePreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOMSnSrcCurrentSuspectedFlag,
+    optIfOMSnSrcCurrentOutputPower,
+    optIfOMSnSrcCurrentLowOutputPower,
+    optIfOMSnSrcCurrentHighOutputPower,
+    optIfOMSnSrcCurrentAggregatedInputPower,
+    optIfOMSnSrcCurrentLowAggregatedInputPower,
+    optIfOMSnSrcCurrentHighAggregatedInputPower,
+    optIfOMSnSrcIntervalSuspectedFlag,
+    optIfOMSnSrcIntervalLastOutputPower,
+    optIfOMSnSrcIntervalLowOutputPower,
+    optIfOMSnSrcIntervalHighOutputPower,
+    optIfOMSnSrcIntervalLastAggregatedInputPower,
+    optIfOMSnSrcIntervalLowAggregatedInputPower,
+    optIfOMSnSrcIntervalHighAggregatedInputPower,
+    optIfOMSnSrcCurDaySuspectedFlag,
+    optIfOMSnSrcCurDayLowOutputPower,
+    optIfOMSnSrcCurDayHighOutputPower,
+    optIfOMSnSrcCurDayLowAggregatedInputPower,
+    optIfOMSnSrcCurDayHighAggregatedInputPower,
+    optIfOMSnSrcPrevDaySuspectedFlag,
+    optIfOMSnSrcPrevDayLastOutputPower,
+    optIfOMSnSrcPrevDayLowOutputPower,
+    optIfOMSnSrcPrevDayHighOutputPower,
+    optIfOMSnSrcPrevDayLastAggregatedInputPower,
+    optIfOMSnSrcPrevDayLowAggregatedInputPower,
+    optIfOMSnSrcPrevDayHighAggregatedInputPower
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OMSn interfaces that
+     support source functions."
+  ::= { optIfGroups 17 }
+
+optIfOMSnSourcePreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOMSnSrcCurrentLowerOutputPowerThreshold,
+    optIfOMSnSrcCurrentUpperOutputPowerThreshold,
+    optIfOMSnSrcCurrentLowerInputPowerThreshold,
+    optIfOMSnSrcCurrentUpperInputPowerThreshold
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OMSn interfaces that
+     that support source functions."
+  ::= { optIfGroups 18 }
+
+optIfOChGroupCommonGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChGroupDirectionality
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OChGroup interfaces."
+  ::= { optIfGroups 19 }
+
+optIfOChGroupSinkPreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChGroupSinkCurrentSuspectedFlag,
+    optIfOChGroupSinkCurrentAggregatedInputPower,
+    optIfOChGroupSinkCurrentLowAggregatedInputPower,
+    optIfOChGroupSinkCurrentHighAggregatedInputPower,
+    optIfOChGroupSinkCurrentOutputPower,
+    optIfOChGroupSinkCurrentLowOutputPower,
+    optIfOChGroupSinkCurrentHighOutputPower,
+    optIfOChGroupSinkIntervalSuspectedFlag,
+    optIfOChGroupSinkIntervalLastAggregatedInputPower,
+    optIfOChGroupSinkIntervalLowAggregatedInputPower,
+    optIfOChGroupSinkIntervalHighAggregatedInputPower,
+    optIfOChGroupSinkIntervalLastOutputPower,
+    optIfOChGroupSinkIntervalLowOutputPower,
+    optIfOChGroupSinkIntervalHighOutputPower,
+    optIfOChGroupSinkCurDaySuspectedFlag,
+    optIfOChGroupSinkCurDayLowAggregatedInputPower,
+    optIfOChGroupSinkCurDayHighAggregatedInputPower,
+    optIfOChGroupSinkCurDayLowOutputPower,
+    optIfOChGroupSinkCurDayHighOutputPower,
+    optIfOChGroupSinkPrevDaySuspectedFlag,
+    optIfOChGroupSinkPrevDayLastAggregatedInputPower,
+    optIfOChGroupSinkPrevDayLowAggregatedInputPower,
+    optIfOChGroupSinkPrevDayHighAggregatedInputPower,
+    optIfOChGroupSinkPrevDayLastOutputPower,
+    optIfOChGroupSinkPrevDayLowOutputPower,
+    optIfOChGroupSinkPrevDayHighOutputPower
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OChGroup interfaces that
+     support sink functions."
+  ::= { optIfGroups 20 }
+
+optIfOChGroupSinkPreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChGroupSinkCurrentLowerInputPowerThreshold,
+    optIfOChGroupSinkCurrentUpperInputPowerThreshold,
+    optIfOChGroupSinkCurrentLowerOutputPowerThreshold,
+    optIfOChGroupSinkCurrentUpperOutputPowerThreshold
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OChGroup interfaces
+     that support sink functions."
+  ::= { optIfGroups 21 }
+
+optIfOChGroupSourcePreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChGroupSrcCurrentSuspectedFlag,
+    optIfOChGroupSrcCurrentOutputPower,
+    optIfOChGroupSrcCurrentLowOutputPower,
+    optIfOChGroupSrcCurrentHighOutputPower,
+    optIfOChGroupSrcCurrentAggregatedInputPower,
+    optIfOChGroupSrcCurrentLowAggregatedInputPower,
+    optIfOChGroupSrcCurrentHighAggregatedInputPower,
+    optIfOChGroupSrcIntervalSuspectedFlag,
+    optIfOChGroupSrcIntervalLastOutputPower,
+    optIfOChGroupSrcIntervalLowOutputPower,
+    optIfOChGroupSrcIntervalHighOutputPower,
+    optIfOChGroupSrcIntervalLastAggregatedInputPower,
+    optIfOChGroupSrcIntervalLowAggregatedInputPower,
+    optIfOChGroupSrcIntervalHighAggregatedInputPower,
+    optIfOChGroupSrcCurDaySuspectedFlag,
+    optIfOChGroupSrcCurDayLowOutputPower,
+    optIfOChGroupSrcCurDayHighOutputPower,
+    optIfOChGroupSrcCurDayLowAggregatedInputPower,
+    optIfOChGroupSrcCurDayHighAggregatedInputPower,
+    optIfOChGroupSrcPrevDaySuspectedFlag,
+    optIfOChGroupSrcPrevDayLastOutputPower,
+    optIfOChGroupSrcPrevDayLowOutputPower,
+    optIfOChGroupSrcPrevDayHighOutputPower,
+    optIfOChGroupSrcPrevDayLastAggregatedInputPower,
+    optIfOChGroupSrcPrevDayLowAggregatedInputPower,
+    optIfOChGroupSrcPrevDayHighAggregatedInputPower
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OChGroup interfaces that
+     support source functions."
+  ::= { optIfGroups 22 }
+
+optIfOChGroupSourcePreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChGroupSrcCurrentLowerOutputPowerThreshold,
+    optIfOChGroupSrcCurrentUpperOutputPowerThreshold,
+    optIfOChGroupSrcCurrentLowerInputPowerThreshold,
+    optIfOChGroupSrcCurrentUpperInputPowerThreshold
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OChGroup interfaces that
+     that support source functions."
+  ::= { optIfGroups 23 }
+
+optIfOChCommonGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChDirectionality
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OCh interfaces."
+  ::= { optIfGroups 24 }
+
+optIfOChSinkGroupBasic OBJECT-GROUP
+  OBJECTS  {
+    optIfOChCurrentStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OCh interfaces that
+     support sink functions."
+  ::= { optIfGroups 25 }
+
+optIfOChSinkPreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChSinkCurrentSuspectedFlag,
+    optIfOChSinkCurrentInputPower,
+    optIfOChSinkCurrentLowInputPower,
+    optIfOChSinkCurrentHighInputPower,
+    optIfOChSinkIntervalSuspectedFlag,
+    optIfOChSinkIntervalLastInputPower,
+    optIfOChSinkIntervalLowInputPower,
+    optIfOChSinkIntervalHighInputPower,
+    optIfOChSinkCurDaySuspectedFlag,
+    optIfOChSinkCurDayLowInputPower,
+    optIfOChSinkCurDayHighInputPower,
+    optIfOChSinkPrevDaySuspectedFlag,
+    optIfOChSinkPrevDayLastInputPower,
+    optIfOChSinkPrevDayLowInputPower,
+    optIfOChSinkPrevDayHighInputPower
+     }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OCh interfaces that
+     support sink functions."
+  ::= { optIfGroups 26 }
+
+optIfOChSinkPreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChSinkCurrentLowerInputPowerThreshold,
+    optIfOChSinkCurrentUpperInputPowerThreshold
+     }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OCh interfaces
+     that support sink functions."
+  ::= { optIfGroups 27 }
+
+optIfOChSourcePreOtnPMGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChSrcCurrentSuspectedFlag,
+    optIfOChSrcCurrentOutputPower,
+    optIfOChSrcCurrentLowOutputPower,
+    optIfOChSrcCurrentHighOutputPower,
+    optIfOChSrcIntervalSuspectedFlag,
+    optIfOChSrcIntervalLastOutputPower,
+    optIfOChSrcIntervalLowOutputPower,
+    optIfOChSrcIntervalHighOutputPower,
+    optIfOChSrcCurDaySuspectedFlag,
+    optIfOChSrcCurDayLowOutputPower,
+    optIfOChSrcCurDayHighOutputPower,
+    optIfOChSrcPrevDaySuspectedFlag,
+    optIfOChSrcPrevDayLastOutputPower,
+    optIfOChSrcPrevDayLowOutputPower,
+    optIfOChSrcPrevDayHighOutputPower
+     }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     objects applicable to OCh interfaces that
+     support source functions."
+  ::= { optIfGroups 28 }
+
+optIfOChSourcePreOtnPMThresholdGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOChSrcCurrentLowerOutputPowerThreshold,
+    optIfOChSrcCurrentUpperOutputPowerThreshold
+     }
+  STATUS  current
+  DESCRIPTION
+    "A collection of pre-OTN performance monitoring
+     threshold objects applicable to OCh interfaces
+     that support source functions."
+  ::= { optIfGroups 29 }
+
+optIfOTUkCommonGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTUkDirectionality,
+    optIfOTUkBitRateK
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all OTUk interfaces."
+  ::= { optIfGroups 30 }
+
+optIfOTUkSourceGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTUkTraceIdentifierTransmitted,
+    optIfOTUkSourceAdaptActive
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to OTUk interfaces that
+     support source functions."
+  ::= { optIfGroups 31 }
+
+optIfOTUkSinkGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfOTUkDAPIExpected,
+    optIfOTUkSAPIExpected,
+    optIfOTUkTraceIdentifierAccepted,
+    optIfOTUkTIMDetMode,
+    optIfOTUkTIMActEnabled,
+    optIfOTUkDEGThr,
+    optIfOTUkDEGM,
+    optIfOTUkSinkAdaptActive,
+    optIfOTUkSinkFECEnabled,
+    optIfOTUkCurrentStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to OTUk interfaces that
+     support sink functions."
+  ::= { optIfGroups 32 }
+
+optIfGCC0Group OBJECT-GROUP
+  OBJECTS  {
+    optIfGCC0Application,
+    optIfGCC0RowStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of GCC0 configuration objects."
+  ::= { optIfGroups 33 }
+
+optIfODUkGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkDirectionality,
+    optIfODUkBitRateK,
+    optIfODUkTcmFieldsInUse,
+    optIfODUkPositionSeqCurrentSize,
+    optIfODUkPositionSeqPosition,
+    optIfODUkPositionSeqPointer,
+    optIfODUkTtpPresent
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all ODUk interfaces."
+  ::= { optIfGroups 34 }
+
+optIfODUkTtpSourceGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTtpTraceIdentifierTransmitted
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all interfaces that support
+     ODUk trail termination source functions."
+  ::= { optIfGroups 35 }
+
+optIfODUkTtpSinkGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTtpDAPIExpected,
+    optIfODUkTtpSAPIExpected,
+    optIfODUkTtpTraceIdentifierAccepted,
+    optIfODUkTtpTIMDetMode,
+    optIfODUkTtpTIMActEnabled,
+    optIfODUkTtpDEGThr,
+    optIfODUkTtpDEGM,
+    optIfODUkTtpCurrentStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of ODUk configuration objects
+     applicable to all interfaces that support
+     ODUk trail termination sink functions."
+  ::= { optIfGroups 36 }
+
+optIfODUkNimGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkNimDAPIExpected,
+    optIfODUkNimSAPIExpected,
+    optIfODUkNimTraceIdentifierAccepted,
+    optIfODUkNimTIMDetMode,
+    optIfODUkNimTIMActEnabled,
+    optIfODUkNimDEGThr,
+    optIfODUkNimDEGM,
+    optIfODUkNimCurrentStatus,
+    optIfODUkNimRowStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of ODUk Nim configuration objects."
+  ::= { optIfGroups 37 }
+
+optIfGCC12Group OBJECT-GROUP
+  OBJECTS  {
+    optIfGCC12GCCPassThrough,
+    optIfGCC12Application,
+    optIfGCC12RowStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of GCC12 configuration objects."
+  ::= { optIfGroups 38 }
+
+optIfODUkTCommonGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTRowStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all ODUkT instances."
+  ::= { optIfGroups 39 }
+
+optIfODUkTSourceGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTTraceIdentifierTransmitted,
+    optIfODUkTSourceLockSignalAdminState
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all ODUkT instances
+     that provide source functions."
+  ::= { optIfGroups 40 }
+
+optIfODUkTSinkGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTDAPIExpected,
+    optIfODUkTSAPIExpected,
+    optIfODUkTTraceIdentifierAccepted,
+    optIfODUkTTIMDetMode,
+    optIfODUkTTIMActEnabled,
+    optIfODUkTDEGThr,
+    optIfODUkTDEGM,
+    optIfODUkTCurrentStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to all ODUkT instances
+     that provide sink functions."
+  ::= { optIfGroups 41 }
+
+optIfODUkTSinkGroupCtp OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTSinkMode,
+    optIfODUkTSinkLockSignalAdminState
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of configuration objects
+     applicable to ODUkT instances not
+     colocated with an ODUk TTP that
+     provide sink functions."
+  ::= { optIfGroups 42 }
+
+optIfODUkTNimGroup OBJECT-GROUP
+  OBJECTS  {
+    optIfODUkTNimDAPIExpected,
+    optIfODUkTNimSAPIExpected,
+    optIfODUkTNimTraceIdentifierAccepted,
+    optIfODUkTNimTIMDetMode,
+    optIfODUkTNimTIMActEnabled,
+    optIfODUkTNimDEGThr,
+    optIfODUkTNimDEGM,
+    optIfODUkTNimCurrentStatus,
+    optIfODUkTNimRowStatus
+    }
+  STATUS  current
+  DESCRIPTION
+    "A collection of ODUkT Nim configuration objects."
+  ::= { optIfGroups 43 }
+
+-- compliance specifications
+
+optIfOtnConfigCompl MODULE-COMPLIANCE
+  STATUS  current
+  DESCRIPTION
+    "Implementation requirements for the OTN configuration
+     functions defined in this MIB module."
+
+  MODULE -- this module
+
+    MANDATORY-GROUPS  {
+      optIfOTMnGroup,
+      optIfOTSnCommonGroup
+      }
+
+    GROUP  optIfOTSnSourceGroupFull
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) for which the corresponding
+       instance of optIfOTSnDirectionality has the value
+       source(2) or bidirectional(3), the corresponding
+       instance of optIfOTMnReduced has the value false(2),
+       and the corresponding instance of optIfOTMnInterfaceType
+       specifies an OTMn interface type of 'IaDI'."
+
+    GROUP  optIfOTSnAPRStatusGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) that support Automatic Power
+       Reduction functions."
+
+    GROUP  optIfOTSnAPRControlGroup
+    DESCRIPTION
+      "This group is optional, but is recommended for interfaces
+       of ifType opticalTransport(196) that provide Automatic
+       Power Reduction control functions."
+
+    GROUP  optIfOTSnSinkGroupBasic
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) for which the corresponding
+       instance of optIfOTSnDirectionality has the value
+       sink(1) or bidirectional(3)."
+
+    GROUP  optIfOTSnSinkGroupFull
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) for which the corresponding
+       instance of optIfOTSnDirectionality has the value
+       sink(1) or bidirectional(3), the corresponding
+       instance of optIfOTMnReduced has the value false(2),
+       and the corresponding instance of optIfOTMnInterfaceType
+       specifies an OTMn interface type of 'IaDI'."
+
+    GROUP  optIfOMSnCommonGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) that support access to the OMS
+       overhead information within the OTN Supervisory Channel."
+
+    GROUP  optIfOMSnSinkGroupBasic
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) that support access to the OMS Overhead
+       information within the OSC (OTN Supervisory Channel)
+       for which the corresponding
+       instance of optIfOMSnDirectionality has the value
+       sink(1) or bidirectional(3)."
+
+    GROUP  optIfOChGroupCommonGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannelGroup(219)."
+
+    GROUP  optIfOChCommonGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(195)."
+
+    GROUP  optIfOChSinkGroupBasic
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) for which the corresponding
+       instance of optIfOChDirectionality has the value
+       sink(1) or bidirectional(3)."
+
+    GROUP  optIfOTUkCommonGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support OTUk layer functions."
+
+    GROUP  optIfOTUkSourceGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support OTUk layer functions
+       and for which the corresponding instance of
+       optIfOTUkDirectionality has the value source(2) or
+       bidirectional(3)."
+
+    GROUP  optIfOTUkSinkGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support OTUk layer functions
+       and for which the corresponding instance of
+
+       optIfOTUkDirectionality has the value sink(1) or
+       bidirectional(3)."
+
+    GROUP  optIfGCC0Group
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support GCC0 access functions.
+       It may be implemented only if the optIfOTUkCommonGroup
+       is also implemented."
+
+    GROUP  optIfODUkGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support ODUk layer functions."
+
+    GROUP  optIfODUkTtpSourceGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) for which the corresponding
+       instance of optIfODUkTtpPresent has the value
+       true(1) and for which the corresponding instance of
+       optIfODUkDirectionality has the value source(2) or
+       bidirectional(3).  It may be implemented only if the
+       optIfODUkGroup is also implemented."
+
+    GROUP  optIfODUkTtpSinkGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) for which the corresponding
+       instance of optIfODUkTtpPresent has the value
+       true(1) and for which the corresponding instance of
+       optIfODUkDirectionality has the value sink(1) or
+       bidirectional(3).  It may be implemented only if the
+       optIfODUkGroup is also implemented."
+
+    GROUP  optIfODUkNimGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) for which the corresponding
+       instance of optIfODUkTtpPresent has the value
+       false(2).  It may be implemented only if the
+       optIfODUkGroup is also implemented."
+
+    GROUP  optIfGCC12Group
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support GCC12 access functions.
+       It may be implemented only if the optIfODUkGroup
+
+       is also implemented."
+
+    GROUP  optIfODUkTCommonGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support intrusive
+       tandem connection monitoring.  It may be implemented
+       only if the optIfODUkGroup is also implemented."
+
+    GROUP  optIfODUkTSourceGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support intrusive
+       tandem connection monitoring and for which
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value false(2), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value true(1).
+       It may be implemented only if the optIfODUkGroup is
+       also implemented."
+
+    GROUP  optIfODUkTSinkGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support intrusive
+       tandem connection monitoring and for which
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+       It may be implemented only if the optIfODUkGroup is
+       also implemented."
+
+    GROUP  optIfODUkTSinkGroupCtp
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support intrusive
+       tandem connection monitoring and for which
+       optIfODUkTtpPresent is false(2) and
+       (i) optIfODUkDirectionality has the value bidirectional(3), or
+       (ii) optIfODUkDirectionality has the value sink(1) and
+            optIfODUkTCodirectional has the value true(1), or
+       (iii) optIfODUkDirectionality has the value source(3) and
+             optIfODUkTCodirectional has the value false(2).
+       It may be implemented only if the optIfODUkGroup and
+       optIfODUkTSinkGroup are also implemented."
+
+    GROUP  optIfODUkTNimGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support non-intrusive
+       tandem connection monitoring.  It may be implemented
+       only if the optIfODUkGroup is also implemented."
+  ::= { optIfCompl 1 }
+
+optIfPreOtnPMCompl MODULE-COMPLIANCE
+  STATUS  current
+  DESCRIPTION
+    "Implementation requirements for Pre-OTN performance
+     monitoring functions defined in this MIB module."
+
+  MODULE  -- this module
+
+    MANDATORY-GROUPS  {
+      optIfPerfMonGroup
+      }
+
+    GROUP  optIfOTSnSinkPreOtnPMGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) that support OTSn sink
+       functions (i.e., for which the corresponding instance
+       of optIfOTSnDirectionality -- if implemented -- has
+       the value sink(1) or bidirectional(3))."
+
+    GROUP  optIfOTSnSinkPreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOTSnSinkPreOtnPMGroup is a prerequisite for
+       implementing this group."
+
+    GROUP  optIfOTSnSourcePreOtnPMGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalTransport(196) that support OTSn source
+       functions (i.e., for which the corresponding instance
+       of optIfOTSnDirectionality -- if implemented -- has
+       the value source(2) or bidirectional(3))."
+
+    GROUP  optIfOTSnSourcePreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOTSnSourcePreOtnPMGroup is a prerequisite for
+       implementing this group "
+
+    GROUP  optIfOMSnSinkPreOtnPMGroup
+    DESCRIPTION
+      "This group is optional.  It may be implemented by systems
+       with the necessary instrumentation on interfaces of ifType
+       opticalTransport(196) that support OMSn sink functions
+       (i.e., for which the corresponding instance of
+       optIfOMSnDirectionality -- if implemented -- has the value
+       sink(1) or bidirectional(3))."
+
+    GROUP  optIfOMSnSinkPreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOMSnSinkPreOtnPMGroup is a prerequisite for
+       implementing this group "
+
+    GROUP  optIfOMSnSourcePreOtnPMGroup
+    DESCRIPTION
+      "This group is optional.  It may be implemented by systems
+       with the necessary instrumentation on interfaces of ifType
+       opticalTransport(196) that support OMSn source functions
+       (i.e., for which the corresponding instance of
+       optIfOMSnDirectionality -- if implemented -- has the value
+       source(2) or bidirectional(3))."
+
+    GROUP  optIfOMSnSourcePreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOMSnSourcePreOtnPMGroup is a prerequisite for
+       implementing this group "
+
+    GROUP  optIfOChGroupSinkPreOtnPMGroup
+    DESCRIPTION
+      "This group is optional.  It may be implemented by systems
+       with the necessary instrumentation on interfaces of ifType
+       opticalChannelGroup(219) that support OChGroup sink functions
+       (i.e., for which the corresponding instance of
+       optIfOChGroupDirectionality -- if implemented -- has the value
+       sink(1) or bidirectional(3))."
+
+    GROUP  optIfOChGroupSinkPreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOChGroupSinkPreOtnPMGroup is a prerequisite for
+       implementing this group "
+
+    GROUP  optIfOChGroupSourcePreOtnPMGroup
+    DESCRIPTION
+      "This group is optional.  It may be implemented by systems
+       with the necessary instrumentation on interfaces of ifType
+       opticalChannelGroup(219) that support OChGroup source functions
+       (i.e., for which the corresponding instance of
+       optIfOChGroupDirectionality -- if implemented -- has the value
+       source(2) or bidirectional(3))."
+
+    GROUP  optIfOChGroupSourcePreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOChGroupSourcePreOtnPMGroup is a prerequisite for
+       implementing this group "
+
+    GROUP  optIfOChSinkPreOtnPMGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support OCh sink functions
+       (i.e., for which the corresponding instance of
+       optIfOChDirectionality -- if implemented -- has the
+       value sink(1) or bidirectional(3))."
+
+    GROUP  optIfOChSinkPreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOChSinkPreOtnPMGroup is a prerequisite for
+       implementing this group "
+
+    GROUP  optIfOChSourcePreOtnPMGroup
+    DESCRIPTION
+      "This group is mandatory for interfaces of ifType
+       opticalChannel(195) that support OCh source functions
+       (i.e., for which the corresponding instance of
+       optIfOChDirectionality -- if implemented -- has the
+       value source(2) or bidirectional(3))."
+
+    GROUP  optIfOChSourcePreOtnPMThresholdGroup
+    DESCRIPTION
+      "This group is mandatory if and only if TCA notifications
+       are implemented.  If the objects of this group are instantiated
+       then the implementation must also provide, in an
+       enterprise MIB, suitable TCA notification definitions and
+       notification control objects.  Implementation of the
+       optIfOChSourcePreOtnPMGroup is a prerequisite for
+       implementing this group "
+  ::= { optIfCompl 2 }
+
+END
diff --git a/snmp_builder/mibs/OSPF-MIB.mib b/snmp_builder/mibs/OSPF-MIB.mib
new file mode 100644
index 0000000..bee1c8d
--- /dev/null
+++ b/snmp_builder/mibs/OSPF-MIB.mib
@@ -0,0 +1,4164 @@
+OSPF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
+    Integer32, Unsigned32, IpAddress, mib-2
+                 FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp
+                 FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+                 FROM SNMPv2-CONF
+    InterfaceIndexOrZero
+                 FROM IF-MIB;
+
+ospf MODULE-IDENTITY
+       LAST-UPDATED "200611100000Z" -- November 10, 2006 00:00:00 EST
+       ORGANIZATION "IETF OSPF Working Group"
+       CONTACT-INFO
+       "WG E-Mail: ospf@ietf.org
+
+        WG Chairs: acee@cisco.com
+                   rohit@gmail.com
+
+        Editors:   Dan Joyal
+                   Nortel
+                   600 Technology Park Drive
+                   Billerica, MA  01821
+                   djoyal@nortel.com
+
+                   Piotr Galecki
+                   Airvana
+                   19 Alpha Road
+                   Chelmsford, MA 01824
+                   pgalecki@airvana.com
+
+                   Spencer Giacalone
+                   CSFB
+                   Eleven Madison Ave
+                   New York, NY 10010-3629
+                   spencer.giacalone@gmail.com"
+       DESCRIPTION
+          "The MIB module to describe the OSPF Version 2
+          Protocol.  Note that some objects in this MIB
+          module may pose a significant security risk.
+          Refer to the Security Considerations section
+          in RFC 4750 for more information.
+
+          Copyright (C) The IETF Trust (2006).
+          This version of this MIB module is part of
+          RFC 4750;  see the RFC itself for full legal
+          notices."
+
+       REVISION "200611100000Z" -- November 10, 2006 09:00:00 EST
+       DESCRIPTION
+         "Updated for latest changes to OSPF Version 2:
+          - updated the General Group with the new
+            ospfRFC1583Compatibility, ospfReferenceBandwidth
+            and ospfDiscontinuityTime objects
+          - added graceful-restart-related objects
+          - added stub-router-related objects
+          - updated the Area Table with NSSA-related objects
+          - added ospfAreaAggregateExtRouteTag object
+          - added Opaque LSA-related objects
+          - updates to the Compliances and Security sections
+          - added area LSA counter table
+          - added section describing translation of notification
+            parameters between SNMP versions
+          - added ospfComplianceObsolete to contain obsolete
+            object groups
+          - deprecated ospfExtLsdbTable
+          See Appendix B of RFC 4750 for more details.
+
+          This version published as part of RFC 4750"
+
+       REVISION "199501201225Z" -- Fri Jan 20 12:25:50 PST 1995
+       DESCRIPTION
+          "The initial SMIv2 revision of this MIB module, published
+          in RFC 1850."
+       ::= { mib-2 14 }
+
+AreaID ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+          "An OSPF Area Identifier.
+           Note that the Area ID, in OSPF, has the same format
+           as an IP address, but has the function of defining
+           a summarization point for link state advertisements."
+       SYNTAX       IpAddress
+
+RouterID ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+          "A OSPF Router Identifier.
+           Note that the Router ID, in OSPF, has the same format
+           as an IP address, but identifies the router independent
+
+           of its IP address."
+       SYNTAX       IpAddress
+
+Metric ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS       current
+       DESCRIPTION
+          "The OSPF internal metric.
+           Note that the OSPF metric is defined as an unsigned value
+           in the range."
+       SYNTAX       Integer32 (0..'FFFF'h)
+
+BigMetric ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS       current
+       DESCRIPTION
+          "The OSPF external metric."
+       SYNTAX       Integer32 (0..'FFFFFF'h)
+
+Status ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+          "An indication of the operability of an OSPF
+          function or feature.  For example, the status
+          of an interface: 'enabled' indicates that
+          it is willing to communicate with other OSPF routers,
+          and 'disabled' indicates that it is not."
+       SYNTAX       INTEGER { enabled (1), disabled (2) }
+
+PositiveInteger ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS       current
+       DESCRIPTION
+          "A positive integer.  Values in excess are precluded as
+          unnecessary and prone to interoperability issues."
+       SYNTAX       Integer32 (0..'7FFFFFFF'h)
+
+HelloRange ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS       current
+       DESCRIPTION
+          "The range of intervals in seconds on which Hello messages
+          are exchanged."
+       SYNTAX       Integer32 (1..'FFFF'h)
+
+UpToMaxAge ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS       current
+       DESCRIPTION
+          "The values in seconds that one might find or configure
+          for variables bounded by the maximum age of an LSA."
+       SYNTAX       Integer32 (0..3600)
+
+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS       current
+       DESCRIPTION
+          "The range of values defined for the priority of a system
+          for becoming the designated router."
+       SYNTAX       Integer32 (0..'FF'h)
+
+TOSType ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d-0"
+       STATUS      current
+       DESCRIPTION
+        "Type of Service (TOS) is defined as a mapping to the IP
+        Type of Service Flags as defined in the IP Forwarding
+        Table MIB
+
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+            |                 |                       |     |
+            |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
+            |                 |                       |     |
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+
+                     IP TOS                IP TOS
+                Field     Policy      Field     Policy
+
+                Contents    Code      Contents    Code
+                0 0 0 0  ==>   0      0 0 0 1  ==>   2
+                0 0 1 0  ==>   4      0 0 1 1  ==>   6
+                0 1 0 0  ==>   8      0 1 0 1  ==>  10
+                0 1 1 0  ==>  12      0 1 1 1  ==>  14
+                1 0 0 0  ==>  16      1 0 0 1  ==>  18
+                1 0 1 0  ==>  20      1 0 1 1  ==>  22
+                1 1 0 0  ==>  24      1 1 0 1  ==>  26
+                1 1 1 0  ==>  28      1 1 1 1  ==>  30
+
+         The remaining values are left for future definition."
+           SYNTAX       Integer32 (0..30)
+
+OspfAuthenticationType ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+          "The authentication type."
+       SYNTAX       INTEGER {
+
+                       none (0),
+                       simplePassword (1),
+                       md5 (2)
+                       -- reserved for specification by IANA (> 2)
+                    }
+
+--  OSPF General Variables
+
+--      Note: These parameters apply globally to the Router's
+--      OSPF Process.
+
+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }
+
+  ospfRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "A 32-bit integer uniquely identifying the
+          router in the Autonomous System.
+          By convention, to ensure uniqueness, this
+          should default to the value of one of the
+          router's IP interface addresses.
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile storage."
+       REFERENCE
+          "OSPF Version 2, C.1 Global parameters"
+       ::= { ospfGeneralGroup 1 }
+
+  ospfAdminStat OBJECT-TYPE
+       SYNTAX       Status
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "The administrative status of OSPF in the
+          router.  The value 'enabled' denotes that the
+          OSPF Process is active on at least one interface;
+          'disabled' disables it on all interfaces.
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile storage."
+       ::= { ospfGeneralGroup 2 }
+
+  ospfVersionNumber OBJECT-TYPE
+       SYNTAX       INTEGER { version2 (2) }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The current version number of the OSPF protocol is 2."
+       REFERENCE
+          "OSPF Version 2, Title"
+       ::= { ospfGeneralGroup 3 }
+
+  ospfAreaBdrRtrStatus OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "A flag to note whether this router is an Area
+          Border Router."
+       REFERENCE
+          "OSPF Version 2, Section 3 Splitting the AS into
+          Areas"
+       ::= { ospfGeneralGroup 4 }
+
+  ospfASBdrRtrStatus OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "A flag to note whether this router is configured as
+           an Autonomous System Border Router.
+
+           This object is persistent and when written the
+           entity SHOULD save the change to non-volatile storage."
+       REFERENCE
+          "OSPF Version 2, Section 3.3 Classification of
+          routers"
+       ::= { ospfGeneralGroup 5 }
+
+  ospfExternLsaCount OBJECT-TYPE
+        SYNTAX       Gauge32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The number of external (LS type-5) link state
+           advertisements in the link state database."
+        REFERENCE
+           "OSPF Version 2, Appendix A.4.5 AS external link
+           advertisements"
+        ::= { ospfGeneralGroup 6 }
+
+  ospfExternLsaCksumSum OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The 32-bit sum of the LS checksums of
+           the external link state advertisements
+           contained in the link state database.  This sum
+           can be used to determine if there has been a
+           change in a router's link state database and
+           to compare the link state database of two
+           routers.  The value should be treated as unsigned
+           when comparing two sums of checksums."
+        ::= { ospfGeneralGroup 7 }
+
+  ospfTOSSupport OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "The router's support for type-of-service routing.
+
+           This object is persistent and when written
+           the entity SHOULD save the change to non-volatile
+           storage."
+       REFERENCE
+          "OSPF Version 2, Appendix F.1.2 Optional TOS
+          support"
+       ::= { ospfGeneralGroup 8 }
+
+   ospfOriginateNewLsas OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of new link state advertisements
+          that have been originated.  This number is
+          incremented each time the router originates a new
+          LSA.
+
+          Discontinuities in the value of this counter can
+          occur at re-initialization of the management system,
+          and at other times as indicated by the value of
+          ospfDiscontinuityTime."
+        ::= { ospfGeneralGroup 9 }
+
+  ospfRxNewLsas OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of link state advertisements received
+          that are determined to be new instantiations.
+          This number does not include newer instantiations
+          of self-originated link state advertisements.
+
+          Discontinuities in the value of this counter can
+          occur at re-initialization of the management system,
+          and at other times as indicated by the value of
+          ospfDiscontinuityTime."
+       ::= { ospfGeneralGroup 10 }
+
+  ospfExtLsdbLimit OBJECT-TYPE
+       SYNTAX       Integer32 (-1..'7FFFFFFF'h)
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "The maximum number of non-default
+          AS-external LSAs entries that can be stored in the
+          link state database.  If the value is -1, then
+          there is no limit.
+
+          When the number of non-default AS-external LSAs
+          in a router's link state database reaches
+          ospfExtLsdbLimit, the router enters
+          overflow state.  The router never holds more than
+          ospfExtLsdbLimit non-default AS-external LSAs
+          in its database.  OspfExtLsdbLimit MUST be set
+          identically in all routers attached to the OSPF
+          backbone and/or any regular OSPF area (i.e.,
+          OSPF stub areas and NSSAs are excluded).
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile
+          storage."
+        DEFVAL { -1 }
+        ::= { ospfGeneralGroup 11 }
+
+  ospfMulticastExtensions OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "A bit mask indicating whether the router is
+          forwarding IP multicast (Class D) datagrams
+          based on the algorithms defined in the
+          multicast extensions to OSPF.
+
+          Bit 0, if set, indicates that the router can
+
+          forward IP multicast datagrams in the router's
+          directly attached areas (called intra-area
+          multicast routing).
+
+          Bit 1, if set, indicates that the router can
+          forward IP multicast datagrams between OSPF
+          areas (called inter-area multicast routing).
+
+          Bit 2, if set, indicates that the router can
+          forward IP multicast datagrams between
+          Autonomous Systems (called inter-AS multicast
+          routing).
+
+          Only certain combinations of bit settings are
+          allowed, namely: 0 (no multicast forwarding is
+          enabled), 1 (intra-area multicasting only), 3
+          (intra-area and inter-area multicasting), 5
+          (intra-area and inter-AS multicasting), and 7
+          (multicasting everywhere).  By default, no
+          multicast forwarding is enabled.
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile
+          storage."
+       DEFVAL { 0 }
+       ::= { ospfGeneralGroup 12 }
+
+  ospfExitOverflowInterval OBJECT-TYPE
+       SYNTAX       PositiveInteger
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "The number of seconds that, after entering
+          OverflowState, a router will attempt to leave
+          OverflowState.  This allows the router to again
+          originate non-default AS-external LSAs.  When
+          set to 0, the router will not leave
+          overflow state until restarted.
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile
+          storage."
+       DEFVAL { 0 }
+       ::= { ospfGeneralGroup 13 }
+
+  ospfDemandExtensions OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "The router's support for demand routing.
+           This object is persistent and when written
+           the entity SHOULD save the change to non-volatile
+           storage."
+       REFERENCE
+          "Extending OSPF to Support Demand Circuits"
+       ::= { ospfGeneralGroup 14 }
+
+  ospfRFC1583Compatibility  OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "Indicates metrics used to choose among multiple
+          AS-external LSAs.  When RFC1583Compatibility is set to
+          enabled, only cost will be used when choosing among
+          multiple AS-external LSAs advertising the same
+          destination.  When RFC1583Compatibility is set to
+          disabled, preference will be driven first by type of
+          path using cost only to break ties.
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile
+          storage."
+        REFERENCE
+           "OSPF Version 2, Section 16.4.1 External path
+            preferences"
+        ::= { ospfGeneralGroup 15 }
+
+ ospfOpaqueLsaSupport  OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The router's support for Opaque LSA types."
+       REFERENCE
+          "The OSPF Opaque LSA Option"
+       ::= { ospfGeneralGroup 16 }
+
+  ospfReferenceBandwidth OBJECT-TYPE
+       SYNTAX       Unsigned32
+       UNITS        "kilobits per second"
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "Reference bandwidth in kilobits/second for
+
+          calculating default interface metrics.  The
+          default value is 100,000 KBPS (100 MBPS).
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile
+          storage."
+       ::= { ospfGeneralGroup 17 }
+
+  ospfRestartSupport OBJECT-TYPE
+       SYNTAX       INTEGER { none (1),
+                              plannedOnly (2),
+                              plannedAndUnplanned (3)
+                            }
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "The router's support for OSPF graceful restart.
+          Options include: no restart support, only planned
+          restarts, or both planned and unplanned restarts.
+
+          This object is persistent and when written
+          the entity SHOULD save the change to non-volatile
+          storage."
+       ::= { ospfGeneralGroup 18 }
+
+  ospfRestartInterval OBJECT-TYPE
+       SYNTAX       Integer32 (1..1800)
+       UNITS        "seconds"
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "Configured OSPF graceful restart timeout interval.
+
+           This object is persistent and when written
+           the entity SHOULD save the change to non-volatile
+           storage."
+       ::= { ospfGeneralGroup 19 }
+
+  ospfRestartStrictLsaChecking OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "Indicates if strict LSA checking is enabled for
+           graceful restart.
+
+           This object is persistent and when written
+           the entity SHOULD save the change to non-volatile
+
+           storage."
+       ::= { ospfGeneralGroup 20 }
+
+  ospfRestartStatus OBJECT-TYPE
+       SYNTAX       INTEGER { notRestarting (1),
+                              plannedRestart (2),
+                              unplannedRestart (3)
+                            }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Current status of OSPF graceful restart."
+       ::= { ospfGeneralGroup 21 }
+
+  ospfRestartAge OBJECT-TYPE
+       SYNTAX       Unsigned32
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Remaining time in current OSPF graceful restart
+          interval."
+       ::= { ospfGeneralGroup 22 }
+
+  ospfRestartExitReason OBJECT-TYPE
+       SYNTAX       INTEGER { none (1),           -- none attempted
+                              inProgress (2),     -- restart in
+                                                  -- progress
+                              completed (3),      -- successfully
+                                                  -- completed
+                              timedOut (4),       -- timed out
+                              topologyChanged (5) -- aborted due to
+                                                  -- topology change.
+                            }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Describes the outcome of the last attempt at a
+          graceful restart.  If the value is 'none', no restart
+          has yet been attempted.  If the value is 'inProgress',
+          a restart attempt is currently underway."
+       ::= { ospfGeneralGroup 23 }
+
+  ospfAsLsaCount OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The number of AS-scope link state
+           advertisements in the AS-scope link state database."
+       ::= { ospfGeneralGroup 24 }
+
+  ospfAsLsaCksumSum OBJECT-TYPE
+       SYNTAX       Unsigned32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The 32-bit unsigned sum of the LS checksums of
+           the AS link state advertisements contained in the AS-scope
+           link state database.  This sum can be used to determine
+           if there has been a change in a router's AS-scope link
+           state database, and to compare the AS-scope link state
+           database of two routers."
+       ::= { ospfGeneralGroup 25 }
+
+   ospfStubRouterSupport OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The router's support for stub router functionality."
+       REFERENCE
+           "OSPF Stub Router Advertisement"
+       ::= { ospfGeneralGroup 26 }
+
+   ospfStubRouterAdvertisement OBJECT-TYPE
+       SYNTAX       INTEGER {
+                          doNotAdvertise (1),
+                          advertise(2)
+                          }
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object controls the advertisement of
+           stub router LSAs by the router.  The value
+           doNotAdvertise will result in the advertisement
+           of a standard router LSA and is the default value.
+
+           This object is persistent and when written
+           the entity SHOULD save the change to non-volatile
+           storage."
+       ::= { ospfGeneralGroup 27 }
+
+  ospfDiscontinuityTime OBJECT-TYPE
+      SYNTAX     TimeStamp
+      MAX-ACCESS read-only
+      STATUS     current
+      DESCRIPTION
+         "The value of sysUpTime on the most recent occasion
+          at which any one of this MIB's counters suffered
+          a discontinuity.
+
+          If no such discontinuities have occurred since the last
+          re-initialization of the local management subsystem,
+          then this object contains a zero value."
+      ::= { ospfGeneralGroup 28 }
+
+--  OSPF Area Table
+--     The OSPF Area Table contains information
+--     regarding the various areas.
+
+  ospfAreaTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfAreaEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "Information describing the configured parameters and
+          cumulative statistics of the router's attached areas.
+          The interfaces and virtual links are configured
+          as part of these areas.  Area 0.0.0.0, by definition,
+          is the backbone area."
+       REFERENCE
+          "OSPF Version 2, Section 6 The Area Data Structure"
+       ::= { ospf 2 }
+
+  ospfAreaEntry OBJECT-TYPE
+       SYNTAX       OspfAreaEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "Information describing the configured parameters and
+          cumulative statistics of one of the router's attached areas.
+          The interfaces and virtual links are configured as part of
+          these areas.  Area 0.0.0.0, by definition, is the backbone
+          area.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       INDEX { ospfAreaId }
+       ::= { ospfAreaTable 1 }
+
+  OspfAreaEntry ::=
+        SEQUENCE {
+           ospfAreaId
+              AreaID,
+           ospfAuthType
+              OspfAuthenticationType,
+           ospfImportAsExtern
+              INTEGER,
+           ospfSpfRuns
+              Counter32,
+           ospfAreaBdrRtrCount
+              Gauge32,
+           ospfAsBdrRtrCount
+              Gauge32,
+           ospfAreaLsaCount
+              Gauge32,
+           ospfAreaLsaCksumSum
+              Integer32,
+           ospfAreaSummary
+              INTEGER,
+           ospfAreaStatus
+              RowStatus,
+           ospfAreaNssaTranslatorRole
+              INTEGER,
+           ospfAreaNssaTranslatorState
+              INTEGER,
+           ospfAreaNssaTranslatorStabilityInterval
+              PositiveInteger,
+           ospfAreaNssaTranslatorEvents
+              Counter32
+           }
+
+  ospfAreaId OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally
+                              -- an SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "A 32-bit integer uniquely identifying an area.
+          Area ID 0.0.0.0 is used for the OSPF backbone."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaEntry 1 }
+
+  ospfAuthType OBJECT-TYPE
+       SYNTAX       OspfAuthenticationType
+       MAX-ACCESS   read-create
+       STATUS       obsolete
+       DESCRIPTION
+          "The authentication type specified for an area."
+       REFERENCE
+          "OSPF Version 2, Appendix D Authentication"
+       DEFVAL { none } -- no authentication, by default
+       ::= { ospfAreaEntry 2 }
+
+  ospfImportAsExtern OBJECT-TYPE
+       SYNTAX       INTEGER {
+                      importExternal (1),
+                      importNoExternal (2),
+                      importNssa (3)
+                      }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "Indicates if an area is a stub area, NSSA, or standard
+          area.  Type-5 AS-external LSAs and type-11 Opaque LSAs are
+          not imported into stub areas or NSSAs.  NSSAs import
+          AS-external data as type-7 LSAs"
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       DEFVAL { importExternal }
+       ::= { ospfAreaEntry 3 }
+
+  ospfSpfRuns OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of times that the intra-area route
+          table has been calculated using this area's
+          link state database.  This is typically done
+          using Dijkstra's algorithm.
+
+          Discontinuities in the value of this counter can occur
+          at re-initialization of the management system, and at other
+          times as indicated by the value of ospfDiscontinuityTime."
+       ::= { ospfAreaEntry 4 }
+
+  ospfAreaBdrRtrCount OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The total number of Area Border Routers reachable
+          within this area.  This is initially zero and is
+          calculated in each Shortest Path First (SPF) pass."
+       ::= { ospfAreaEntry 5 }
+
+  ospfAsBdrRtrCount OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The total number of Autonomous System Border
+          Routers reachable within this area.  This is
+          initially zero and is calculated in each SPF
+          pass."
+       ::= { ospfAreaEntry 6 }
+
+  ospfAreaLsaCount OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The total number of link state advertisements
+          in this area's link state database, excluding
+          AS-external LSAs."
+       ::= { ospfAreaEntry 7 }
+
+  ospfAreaLsaCksumSum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit sum of the link state
+          advertisements' LS checksums contained in this
+          area's link state database.  This sum excludes
+          external (LS type-5) link state advertisements.
+          The sum can be used to determine if there has
+          been a change in a router's link state
+          database, and to compare the link state database of
+          two routers.  The value should be treated as unsigned
+          when comparing two sums of checksums."
+       DEFVAL { 0 }
+       ::= { ospfAreaEntry 8 }
+
+  ospfAreaSummary OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       noAreaSummary (1),
+                       sendAreaSummary (2)
+                       }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The variable ospfAreaSummary controls the
+          import of summary LSAs into stub and NSSA areas.
+          It has no effect on other areas.
+
+          If it is noAreaSummary, the router will not
+          originate summary LSAs into the stub or NSSA area.
+          It will rely entirely on its default route.
+
+          If it is sendAreaSummary, the router will both
+          summarize and propagate summary LSAs."
+       DEFVAL { noAreaSummary }
+       ::= { ospfAreaEntry 9 }
+
+  ospfAreaStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfAreaEntry 10 }
+
+  ospfAreaNssaTranslatorRole OBJECT-TYPE
+       SYNTAX       INTEGER { always (1), candidate (2) }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "Indicates an NSSA border router's ability to
+          perform NSSA translation of type-7 LSAs into
+          type-5 LSAs."
+       DEFVAL { candidate }
+       ::= { ospfAreaEntry 11 }
+
+  ospfAreaNssaTranslatorState OBJECT-TYPE
+       SYNTAX       INTEGER { enabled (1),
+                       elected (2),
+                       disabled (3)
+                       }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Indicates if and how an NSSA border router is
+          performing NSSA translation of type-7 LSAs into type-5
+
+          LSAs.  When this object is set to enabled, the NSSA Border
+          router's OspfAreaNssaExtTranslatorRole has been set to
+          always.  When this object is set to elected, a candidate
+          NSSA Border router is Translating type-7 LSAs into type-5.
+          When this object is set to disabled, a candidate NSSA
+          border router is NOT translating type-7 LSAs into type-5."
+       ::= { ospfAreaEntry 12 }
+
+  ospfAreaNssaTranslatorStabilityInterval OBJECT-TYPE
+       SYNTAX       PositiveInteger
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The number of seconds after an elected translator
+          determines its services are no longer required, that
+          it should continue to perform its translation duties."
+       DEFVAL { 40 }
+       ::= { ospfAreaEntry 13 }
+
+  ospfAreaNssaTranslatorEvents OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Indicates the number of translator state changes
+          that have occurred since the last boot-up.
+
+          Discontinuities in the value of this counter can occur
+          at re-initialization of the management system, and at other
+          times as indicated by the value of ospfDiscontinuityTime."
+       ::= { ospfAreaEntry 14 }
+
+--  OSPF Area Default Metric Table
+
+  ospfStubAreaTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfStubAreaEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The set of metrics that will be advertised
+          by a default Area Border Router into a stub area."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2, Area Parameters"
+       ::= { ospf 3 }
+
+  ospfStubAreaEntry OBJECT-TYPE
+       SYNTAX       OspfStubAreaEntry
+       MAX-ACCESS   not-accessible
+       STATUS      current
+       DESCRIPTION
+          "The metric for a given Type of Service that
+          will be advertised by a default Area Border
+          Router into a stub area.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2, Area Parameters"
+       INDEX { ospfStubAreaId, ospfStubTOS }
+       ::= { ospfStubAreaTable 1 }
+
+  OspfStubAreaEntry ::=
+       SEQUENCE {
+          ospfStubAreaId
+             AreaID,
+          ospfStubTOS
+             TOSType,
+          ospfStubMetric
+             BigMetric,
+          ospfStubStatus
+             RowStatus,
+          ospfStubMetricType
+             INTEGER
+          }
+
+  ospfStubAreaId OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit identifier for the stub area.  On
+          creation, this can be derived from the
+          instance."
+       ::= { ospfStubAreaEntry 1 }
+
+  ospfStubTOS OBJECT-TYPE
+       SYNTAX       TOSType
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The Type of Service associated with the
+          metric.  On creation, this can be derived from
+
+          the instance."
+       ::= { ospfStubAreaEntry 2 }
+
+  ospfStubMetric OBJECT-TYPE
+       SYNTAX       BigMetric
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The metric value applied at the indicated Type
+          of Service.  By default, this equals the least
+          metric at the Type of Service among the
+          interfaces to other areas."
+       ::= { ospfStubAreaEntry 3 }
+
+  ospfStubStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfStubAreaEntry 4 }
+
+  ospfStubMetricType OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       ospfMetric (1),  -- OSPF Metric
+                       comparableCost (2), -- external type 1
+                       nonComparable  (3) -- external type 2
+                       }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This variable displays the type of metric
+          advertised as a default route."
+       DEFVAL { ospfMetric }
+       ::= { ospfStubAreaEntry 5 }
+
+--  OSPF Link State Database
+
+  ospfLsdbTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The OSPF Process's link state database (LSDB).
+           The LSDB contains the link state advertisements
+           from throughout the areas that the device is attached to."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State Advertisements"
+       ::= { ospf 4 }
+
+  ospfLsdbEntry OBJECT-TYPE
+       SYNTAX   OspfLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS   current
+       DESCRIPTION
+          "A single link state advertisement."
+       INDEX { ospfLsdbAreaId, ospfLsdbType,
+               ospfLsdbLsid, ospfLsdbRouterId }
+       ::= { ospfLsdbTable 1 }
+
+  OspfLsdbEntry ::=
+       SEQUENCE {
+          ospfLsdbAreaId
+             AreaID,
+          ospfLsdbType
+             INTEGER,
+          ospfLsdbLsid
+             IpAddress,
+          ospfLsdbRouterId
+             RouterID,
+          ospfLsdbSequence
+             Integer32,
+          ospfLsdbAge
+             Integer32,
+          ospfLsdbChecksum
+             Integer32,
+          ospfLsdbAdvertisement
+             OCTET STRING
+          }
+
+  ospfLsdbAreaId OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit identifier of the area from which
+          the LSA was received."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfLsdbEntry 1 }
+
+  ospfLsdbType OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       routerLink (1),
+                       networkLink (2),
+                       summaryLink (3),
+                       asSummaryLink (4),
+                       asExternalLink (5), -- but see ospfAsLsdbTable
+                       multicastLink (6),
+                       nssaExternalLink (7),
+                       areaOpaqueLink (10)
+                       }
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The type of the link state advertisement.
+          Each link state type has a separate advertisement
+          format.
+
+          Note: External link state advertisements are permitted
+          for backward compatibility, but should be displayed
+          in the ospfAsLsdbTable rather than here."
+       REFERENCE
+          "OSPF Version 2, Appendix A.4.1 The Link State
+          Advertisement header"
+       ::= { ospfLsdbEntry 2 }
+
+  ospfLsdbLsid OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The Link State ID is an LS Type Specific field
+          containing either a Router ID or an IP address;
+          it identifies the piece of the routing domain
+          that is being described by the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.4 Link State ID"
+       ::= { ospfLsdbEntry 3 }
+
+  ospfLsdbRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit number that uniquely identifies the
+          originating router in the Autonomous System."
+       REFERENCE
+          "OSPF Version 2, Appendix C.1 Global parameters"
+       ::= { ospfLsdbEntry 4 }
+
+  ospfLsdbSequence OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The sequence number field is a signed 32-bit
+          integer.  It starts with the value '80000001'h,
+          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+          Thus, a typical sequence number will be very negative.
+          It is used to detect old and duplicate Link State
+          Advertisements.  The space of sequence numbers is linearly
+          ordered.  The larger the sequence number, the more recent
+          the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.6 LS sequence
+          number"
+       ::= { ospfLsdbEntry 5 }
+
+  ospfLsdbAge OBJECT-TYPE
+       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
+                              -- doNotAge bit is set
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the age of the link state advertisement
+          in seconds."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.1 LS age"
+       ::= { ospfLsdbEntry 6 }
+
+  ospfLsdbChecksum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the checksum of the complete contents of
+          the advertisement, excepting the age field.  The age field
+          is excepted so that an advertisement's age can be
+          incremented without updating the checksum.  The checksum
+          used is the same that is used for ISO connectionless
+
+          datagrams; it is commonly referred to as the
+          Fletcher checksum."
+        REFERENCE
+           "OSPF Version 2, Section 12.1.7 LS checksum"
+        ::= { ospfLsdbEntry 7 }
+
+  ospfLsdbAdvertisement OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE (1..65535))
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The entire link state advertisement, including
+          its header.
+
+          Note that for variable length LSAs, SNMP agents
+          may not be able to return the largest string size."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State Advertisements"
+       ::= { ospfLsdbEntry 8 }
+
+--  Address Range Table
+
+  ospfAreaRangeTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfAreaRangeEntry
+       MAX-ACCESS   not-accessible
+       STATUS       obsolete
+       DESCRIPTION
+          "The Address Range Table acts as an adjunct to the Area
+           Table.  It describes those Address Range Summaries that
+           are configured to be propagated from an Area to reduce
+           the amount of information about it that is known beyond
+           its borders.  It contains a set of IP address ranges
+           specified by an IP address/IP network mask pair.
+           For example, class B address range of X.X.X.X
+           with a network mask of 255.255.0.0 includes all IP
+           addresses from X.X.0.0 to X.X.255.255.
+
+           Note that this table is obsoleted and is replaced
+           by the Area Aggregate Table."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2  Area parameters"
+       ::= { ospf 5 }
+
+  ospfAreaRangeEntry OBJECT-TYPE
+       SYNTAX       OspfAreaRangeEntry
+       MAX-ACCESS   not-accessible
+       STATUS       obsolete
+       DESCRIPTION
+          "A single area address range.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2  Area parameters"
+       INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
+       ::= { ospfAreaRangeTable 1 }
+
+  OspfAreaRangeEntry ::=
+       SEQUENCE {
+          ospfAreaRangeAreaId
+             AreaID,
+          ospfAreaRangeNet
+             IpAddress,
+          ospfAreaRangeMask
+             IpAddress,
+          ospfAreaRangeStatus
+             RowStatus,
+          ospfAreaRangeEffect
+             INTEGER
+          }
+
+  ospfAreaRangeAreaId OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       obsolete
+       DESCRIPTION
+          "The area that the address range is to be found
+          within."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaRangeEntry 1 }
+
+  ospfAreaRangeNet OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       obsolete
+       DESCRIPTION
+          "The IP address of the net or subnet indicated
+          by the range."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaRangeEntry 2 }
+
+  ospfAreaRangeMask OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-create
+       STATUS       obsolete
+       DESCRIPTION
+          "The subnet mask that pertains to the net or
+          subnet."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaRangeEntry 3 }
+
+  ospfAreaRangeStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       obsolete
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfAreaRangeEntry 4 }
+
+  ospfAreaRangeEffect OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       advertiseMatching (1),
+                       doNotAdvertiseMatching (2)
+                       }
+       MAX-ACCESS   read-create
+       STATUS       obsolete
+       DESCRIPTION
+          "Subnets subsumed by ranges either trigger the
+          advertisement of the indicated summary
+         (advertiseMatching) or result in the subnet's not
+          being advertised at all outside the area."
+       DEFVAL { advertiseMatching }
+       ::= { ospfAreaRangeEntry 5 }
+
+--  OSPF Host Table
+
+  ospfHostTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfHostEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Host/Metric Table indicates what hosts are directly
+
+          attached to the router, what metrics and types
+          of service should be advertised for them,
+          and what areas they are found within."
+       REFERENCE
+          "OSPF Version 2, Appendix C.7 Host route
+          parameters"
+       ::= { ospf 6 }
+
+  ospfHostEntry OBJECT-TYPE
+       SYNTAX       OspfHostEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "A metric to be advertised, for a given type of
+          service, when a given host is reachable.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       INDEX { ospfHostIpAddress, ospfHostTOS }
+       ::= { ospfHostTable 1 }
+
+  OspfHostEntry ::=
+       SEQUENCE {
+          ospfHostIpAddress
+             IpAddress,
+          ospfHostTOS
+             TOSType,
+          ospfHostMetric
+             Metric,
+          ospfHostStatus
+             RowStatus,
+          ospfHostAreaID
+             AreaID,
+          ospfHostCfgAreaID
+             AreaID
+          }
+
+  ospfHostIpAddress OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The IP address of the host."
+       REFERENCE
+          "OSPF Version 2, Appendix C.7 Host route parameters"
+       ::= { ospfHostEntry 1 }
+
+  ospfHostTOS OBJECT-TYPE
+       SYNTAX       TOSType
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The Type of Service of the route being configured."
+       REFERENCE
+          "OSPF Version 2, Appendix C.7 Host route parameters"
+       ::= { ospfHostEntry 2 }
+
+  ospfHostMetric OBJECT-TYPE
+       SYNTAX       Metric
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The metric to be advertised."
+       REFERENCE
+          "OSPF Version 2, Appendix C.7 Host route parameters"
+       ::= { ospfHostEntry 3 }
+
+  ospfHostStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfHostEntry 4 }
+
+  ospfHostAreaID OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only
+       STATUS       deprecated
+       DESCRIPTION
+          "The OSPF area to which the host belongs.
+          Deprecated by ospfHostCfgAreaID."
+       REFERENCE
+          "OSPF Version 2, Appendix C.7 Host parameters"
+       ::= { ospfHostEntry 5 }
+
+  ospfHostCfgAreaID OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "To configure the OSPF area to which the host belongs."
+       REFERENCE
+          "OSPF Version 2, Appendix C.7 Host parameters"
+       ::= { ospfHostEntry 6 }
+
+--  OSPF Interface Table
+
+  ospfIfTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfIfEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The OSPF Interface Table describes the interfaces
+          from the viewpoint of OSPF.
+          It augments the ipAddrTable with OSPF specific information."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3  Router interface
+          parameters"
+       ::= { ospf 7 }
+
+  ospfIfEntry OBJECT-TYPE
+       SYNTAX       OspfIfEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The OSPF interface entry describes one interface
+          from the viewpoint of OSPF.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       INDEX { ospfIfIpAddress, ospfAddressLessIf }
+       ::= { ospfIfTable 1 }
+
+  OspfIfEntry ::=
+       SEQUENCE {
+          ospfIfIpAddress
+             IpAddress,
+          ospfAddressLessIf
+             InterfaceIndexOrZero,
+          ospfIfAreaId
+             AreaID,
+          ospfIfType
+             INTEGER,
+          ospfIfAdminStat
+
+             Status,
+          ospfIfRtrPriority
+             DesignatedRouterPriority,
+          ospfIfTransitDelay
+             UpToMaxAge,
+          ospfIfRetransInterval
+             UpToMaxAge,
+          ospfIfHelloInterval
+             HelloRange,
+          ospfIfRtrDeadInterval
+             PositiveInteger,
+          ospfIfPollInterval
+             PositiveInteger,
+          ospfIfState
+             INTEGER,
+          ospfIfDesignatedRouter
+             IpAddress,
+          ospfIfBackupDesignatedRouter
+             IpAddress,
+          ospfIfEvents
+             Counter32,
+          ospfIfAuthKey
+             OCTET STRING,
+          ospfIfStatus
+             RowStatus,
+          ospfIfMulticastForwarding
+             INTEGER,
+          ospfIfDemand
+             TruthValue,
+          ospfIfAuthType
+             OspfAuthenticationType,
+          ospfIfLsaCount
+             Gauge32,
+          ospfIfLsaCksumSum
+             Unsigned32,
+          ospfIfDesignatedRouterId
+             RouterID,
+          ospfIfBackupDesignatedRouterId
+             RouterID
+          }
+
+  ospfIfIpAddress OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The IP address of this OSPF interface."
+       ::= { ospfIfEntry 1 }
+
+  ospfAddressLessIf OBJECT-TYPE
+       SYNTAX       InterfaceIndexOrZero
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "For the purpose of easing the instancing of
+          addressed and addressless interfaces; this
+          variable takes the value 0 on interfaces with
+          IP addresses and the corresponding value of
+          ifIndex for interfaces having no IP address."
+       ::= { ospfIfEntry 2 }
+
+  ospfIfAreaId OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "A 32-bit integer uniquely identifying the area
+          to which the interface connects.  Area ID
+          0.0.0.0 is used for the OSPF backbone."
+       DEFVAL { '00000000'H }  -- 0.0.0.0
+       ::= { ospfIfEntry 3 }
+
+  ospfIfType OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       broadcast (1),
+                       nbma (2),
+                       pointToPoint (3),
+                       pointToMultipoint (5)
+                       }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The OSPF interface type.
+          By way of a default, this field may be intuited
+          from the corresponding value of ifType.
+          Broadcast LANs, such as Ethernet and IEEE 802.5,
+          take the value 'broadcast', X.25 and similar
+          technologies take the value 'nbma', and links
+          that are definitively point to point take the
+          value 'pointToPoint'."
+        ::= { ospfIfEntry 4 }
+
+  ospfIfAdminStat OBJECT-TYPE
+       SYNTAX       Status
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The OSPF interface's administrative status.
+          The value formed on the interface, and the interface
+          will be advertised as an internal route to some area.
+          The value 'disabled' denotes that the interface is
+          external to OSPF."
+       DEFVAL { enabled }
+       ::= { ospfIfEntry 5 }
+
+  ospfIfRtrPriority OBJECT-TYPE
+       SYNTAX       DesignatedRouterPriority
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The priority of this interface.  Used in
+          multi-access networks, this field is used in
+          the designated router election algorithm.  The
+          value 0 signifies that the router is not eligible
+          to become the designated router on this particular
+          network.  In the event of a tie in this value,
+          routers will use their Router ID as a tie breaker."
+        DEFVAL { 1 }
+        ::= { ospfIfEntry 6 }
+
+  ospfIfTransitDelay OBJECT-TYPE
+        SYNTAX       UpToMaxAge
+        UNITS        "seconds"
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+           "The estimated number of seconds it takes to
+           transmit a link state update packet over this
+           interface.  Note that the minimal value SHOULD be
+           1 second."
+        DEFVAL { 1 }
+        ::= { ospfIfEntry 7 }
+
+  ospfIfRetransInterval OBJECT-TYPE
+       SYNTAX       UpToMaxAge
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The number of seconds between link state advertisement
+          retransmissions, for adjacencies belonging to this
+          interface.  This value is also used when retransmitting
+
+          database description and Link State request packets.
+          Note that minimal value SHOULD be 1 second."
+       DEFVAL { 5 }
+       ::= { ospfIfEntry 8 }
+
+  ospfIfHelloInterval OBJECT-TYPE
+       SYNTAX       HelloRange
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The length of time, in seconds, between the Hello packets
+          that the router sends on the interface.  This value must be
+          the same for all routers attached to a common network."
+       DEFVAL { 10 }
+       ::= { ospfIfEntry 9 }
+
+  ospfIfRtrDeadInterval OBJECT-TYPE
+       SYNTAX       PositiveInteger
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The number of seconds that a router's Hello packets have
+          not been seen before its neighbors declare the router down.
+          This should be some multiple of the Hello interval.  This
+          value must be the same for all routers attached to a common
+          network."
+        DEFVAL { 40 }
+        ::= { ospfIfEntry 10 }
+
+  ospfIfPollInterval OBJECT-TYPE
+       SYNTAX       PositiveInteger
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The larger time interval, in seconds, between the Hello
+          packets sent to an inactive non-broadcast multi-access
+          neighbor."
+       DEFVAL { 120 }
+       ::= { ospfIfEntry 11 }
+
+  ospfIfState OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       down (1),
+                       loopback (2),
+                       waiting (3),
+                       pointToPoint (4),
+                       designatedRouter (5),
+                       backupDesignatedRouter (6),
+                       otherDesignatedRouter (7)
+                       }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The OSPF Interface State."
+       DEFVAL { down }
+       ::= { ospfIfEntry 12 }
+
+  ospfIfDesignatedRouter OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The IP address of the designated router."
+       DEFVAL { '00000000'H } -- 0.0.0.0
+       ::= { ospfIfEntry 13 }
+
+  ospfIfBackupDesignatedRouter OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The IP address of the backup designated
+          router."
+       DEFVAL { '00000000'H }  -- 0.0.0.0
+       ::= { ospfIfEntry 14 }
+
+  ospfIfEvents OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of times this OSPF interface has
+          changed its state or an error has occurred.
+
+          Discontinuities in the value of this counter can occur
+          at re-initialization of the management system, and at other
+          times as indicated by the value of ospfDiscontinuityTime."
+       ::= { ospfIfEntry 15 }
+
+  ospfIfAuthKey OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE (0..256))
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The cleartext password used as an OSPF
+          authentication key when simplePassword security
+          is enabled.  This object does not access any OSPF
+          cryptogaphic (e.g., MD5) authentication key under
+          any circumstance.
+
+          If the key length is shorter than 8 octets, the
+          agent will left adjust and zero fill to 8 octets.
+
+          Unauthenticated interfaces need no authentication
+          key, and simple password authentication cannot use
+          a key of more than 8 octets.
+
+          Note that the use of simplePassword authentication
+          is NOT recommended when there is concern regarding
+          attack upon the OSPF system.  SimplePassword
+          authentication is only sufficient to protect against
+          accidental misconfigurations because it re-uses
+          cleartext passwords [RFC1704].
+
+          When read, ospfIfAuthKey always returns an octet
+          string of length zero."
+       REFERENCE
+          "OSPF Version 2, Section 9 The Interface Data
+          Structure"
+       DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
+       ::= { ospfIfEntry 16 }
+
+  ospfIfStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfIfEntry 17 }
+
+  ospfIfMulticastForwarding OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       blocked (1), -- no multicast forwarding
+                       multicast (2), -- using multicast address
+                       unicast (3) -- to each OSPF neighbor
+
+                       }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The way multicasts should be forwarded on this
+          interface: not forwarded, forwarded as data
+          link multicasts, or forwarded as data link
+          unicasts.  Data link multicasting is not
+          meaningful on point-to-point and NBMA interfaces,
+          and setting ospfMulticastForwarding to 0 effectively
+          disables all multicast forwarding."
+       DEFVAL { blocked }
+       ::= { ospfIfEntry 18 }
+
+  ospfIfDemand OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "Indicates whether Demand OSPF procedures (hello
+          suppression to FULL neighbors and setting the
+          DoNotAge flag on propagated LSAs) should be
+          performed on this interface."
+       DEFVAL { false }
+       ::= { ospfIfEntry 19 }
+
+  ospfIfAuthType OBJECT-TYPE
+       SYNTAX       OspfAuthenticationType
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The authentication type specified for an interface.
+
+          Note that this object can be used to engage
+          in significant attacks against an OSPF router."
+       REFERENCE
+          "OSPF Version 2, Appendix D Authentication"
+       DEFVAL { none } -- no authentication, by default
+       ::= { ospfIfEntry 20 }
+
+  ospfIfLsaCount OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The total number of link-local link state advertisements
+          in this interface's link-local link state database."
+       ::= { ospfIfEntry 21 }
+
+  ospfIfLsaCksumSum OBJECT-TYPE
+       SYNTAX       Unsigned32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit unsigned sum of the Link State
+          Advertisements' LS checksums contained in this
+          interface's link-local link state database.
+          The sum can be used to determine if there has
+          been a change in the interface's link state
+          database and to compare the interface link state
+          database of routers attached to the same subnet."
+       ::= { ospfIfEntry 22 }
+
+  ospfIfDesignatedRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The Router ID of the designated router."
+       ::= { ospfIfEntry 23 }
+
+  ospfIfBackupDesignatedRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The Router ID of the backup designated router."
+       ::= { ospfIfEntry 24 }
+
+--  OSPF Interface Metric Table
+
+  ospfIfMetricTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfIfMetricEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Metric Table describes the metrics to be advertised
+          for a specified interface at the various types of service.
+          As such, this table is an adjunct of the OSPF Interface
+          Table.
+
+          Types of service, as defined by RFC 791, have the ability
+          to request low delay, high bandwidth, or reliable linkage.
+
+          For the purposes of this specification, the measure of
+          bandwidth:
+
+          Metric = referenceBandwidth / ifSpeed
+
+          is the default value.
+          The default reference bandwidth is 10^8.
+          For multiple link interfaces, note that ifSpeed is the sum
+          of the individual link speeds.  This yields a number having
+          the following typical values:
+
+          Network Type/bit rate   Metric
+
+          >= 100 MBPS                 1
+          Ethernet/802.3             10
+          E1                         48
+          T1 (ESF)                   65
+          64 KBPS                    1562
+          56 KBPS                    1785
+          19.2 KBPS                  5208
+          9.6 KBPS                   10416
+
+          Routes that are not specified use the default
+          (TOS 0) metric.
+
+          Note that the default reference bandwidth can be configured
+          using the general group object ospfReferenceBandwidth."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3 Router interface
+          parameters"
+       ::= { ospf 8 }
+
+  ospfIfMetricEntry OBJECT-TYPE
+       SYNTAX       OspfIfMetricEntry
+       MAX-ACCESS   not-accessible
+       STATUS      current
+       DESCRIPTION
+          "A particular TOS metric for a non-virtual interface
+          identified by the interface index.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3 Router interface
+          parameters"
+       INDEX { ospfIfMetricIpAddress,
+          ospfIfMetricAddressLessIf,
+          ospfIfMetricTOS }
+       ::= { ospfIfMetricTable 1 }
+
+  OspfIfMetricEntry ::=
+       SEQUENCE {
+          ospfIfMetricIpAddress
+             IpAddress,
+          ospfIfMetricAddressLessIf
+             InterfaceIndexOrZero,
+          ospfIfMetricTOS
+             TOSType,
+          ospfIfMetricValue
+             Metric,
+          ospfIfMetricStatus
+             RowStatus
+          }
+
+  ospfIfMetricIpAddress OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The IP address of this OSPF interface.  On row
+          creation, this can be derived from the instance."
+       ::= { ospfIfMetricEntry 1 }
+
+  ospfIfMetricAddressLessIf OBJECT-TYPE
+       SYNTAX       InterfaceIndexOrZero
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "For the purpose of easing the instancing of
+          addressed and addressless interfaces; this
+          variable takes the value 0 on interfaces with
+          IP addresses and the value of ifIndex for
+          interfaces having no IP address.  On row
+          creation, this can be derived from the instance."
+        ::= { ospfIfMetricEntry 2 }
+
+  ospfIfMetricTOS OBJECT-TYPE
+       SYNTAX       TOSType
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The Type of Service metric being referenced.
+          On row creation, this can be derived from the
+          instance."
+       ::= { ospfIfMetricEntry 3 }
+
+  ospfIfMetricValue OBJECT-TYPE
+       SYNTAX       Metric
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The metric of using this Type of Service on
+          this interface.  The default value of the TOS 0
+          metric is 10^8 / ifSpeed."
+       ::= { ospfIfMetricEntry 4 }
+
+  ospfIfMetricStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfIfMetricEntry 5 }
+
+--  OSPF Virtual Interface Table
+
+  ospfVirtIfTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfVirtIfEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "Information about this router's virtual interfaces
+          that the OSPF Process is configured to carry on."
+       REFERENCE
+          "OSPF Version 2, Appendix C.4  Virtual link
+          parameters"
+       ::= { ospf 9 }
+
+  ospfVirtIfEntry OBJECT-TYPE
+       SYNTAX       OspfVirtIfEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "Information about a single virtual interface.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
+       ::= { ospfVirtIfTable 1 }
+
+  OspfVirtIfEntry ::=
+       SEQUENCE {
+          ospfVirtIfAreaId
+             AreaID,
+          ospfVirtIfNeighbor
+             RouterID,
+          ospfVirtIfTransitDelay
+             UpToMaxAge,
+          ospfVirtIfRetransInterval
+             UpToMaxAge,
+          ospfVirtIfHelloInterval
+             HelloRange,
+          ospfVirtIfRtrDeadInterval
+             PositiveInteger,
+          ospfVirtIfState
+             INTEGER,
+          ospfVirtIfEvents
+             Counter32,
+          ospfVirtIfAuthKey
+             OCTET STRING,
+          ospfVirtIfStatus
+             RowStatus,
+          ospfVirtIfAuthType
+             OspfAuthenticationType,
+          ospfVirtIfLsaCount
+             Gauge32,
+          ospfVirtIfLsaCksumSum
+             Unsigned32
+          }
+
+  ospfVirtIfAreaId OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The transit area that the virtual link
+          traverses.  By definition, this is not 0.0.0.0."
+       ::= { ospfVirtIfEntry 1 }
+
+  ospfVirtIfNeighbor OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The Router ID of the virtual neighbor."
+       ::= { ospfVirtIfEntry 2 }
+
+  ospfVirtIfTransitDelay OBJECT-TYPE
+       SYNTAX       UpToMaxAge
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The estimated number of seconds it takes to
+          transmit a Link State update packet over this
+          interface.  Note that the minimal value SHOULD be
+          1 second."
+       DEFVAL { 1 }
+       ::= { ospfVirtIfEntry 3 }
+
+  ospfVirtIfRetransInterval OBJECT-TYPE
+       SYNTAX       UpToMaxAge
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The number of seconds between link state
+          avertisement retransmissions, for adjacencies
+          belonging to this interface.  This value is
+          also used when retransmitting database
+          description and Link State request packets.  This
+          value should be well over the expected
+          round-trip time.  Note that the minimal value SHOULD be
+          1 second."
+       DEFVAL { 5 }
+       ::= { ospfVirtIfEntry 4 }
+
+  ospfVirtIfHelloInterval OBJECT-TYPE
+       SYNTAX       HelloRange
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The length of time, in seconds, between the
+          Hello packets that the router sends on the
+          interface.  This value must be the same for the
+          virtual neighbor."
+       DEFVAL { 10 }
+       ::= { ospfVirtIfEntry 5 }
+
+  ospfVirtIfRtrDeadInterval OBJECT-TYPE
+       SYNTAX       PositiveInteger
+       UNITS        "seconds"
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The number of seconds that a router's Hello
+          packets have not been seen before its
+          neighbors declare the router down.  This should be
+          some multiple of the Hello interval.  This
+          value must be the same for the virtual neighbor."
+       DEFVAL { 60 }
+       ::= { ospfVirtIfEntry 6 }
+
+  ospfVirtIfState OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       down (1), -- these use the same encoding
+                       pointToPoint (4) -- as the ospfIfTable
+                       }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "OSPF virtual interface states."
+       DEFVAL { down }
+       ::= { ospfVirtIfEntry 7 }
+
+  ospfVirtIfEvents OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of state changes or error events on
+          this virtual link.
+
+          Discontinuities in the value of this counter can occur
+          at re-initialization of the management system, and at other
+          times as indicated by the value of ospfDiscontinuityTime."
+       ::= { ospfVirtIfEntry 8 }
+
+  ospfVirtIfAuthKey OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE(0..256))
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The cleartext password used as an OSPF
+          authentication key when simplePassword security
+          is enabled.  This object does not access any OSPF
+          cryptogaphic (e.g., MD5) authentication key under
+          any circumstance.
+
+          If the key length is shorter than 8 octets, the
+          agent will left adjust and zero fill to 8 octets.
+
+          Unauthenticated interfaces need no authentication
+          key, and simple password authentication cannot use
+          a key of more than 8 octets.
+
+          Note that the use of simplePassword authentication
+          is NOT recommended when there is concern regarding
+          attack upon the OSPF system.  SimplePassword
+          authentication is only sufficient to protect against
+          accidental misconfigurations because it re-uses
+          cleartext passwords.  [RFC1704]
+
+          When read, ospfIfAuthKey always returns an octet
+          string of length zero."
+       REFERENCE
+          "OSPF Version 2, Section 9 The Interface Data
+          Structure"
+       DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
+       ::= { ospfVirtIfEntry 9 }
+
+  ospfVirtIfStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+        ::= { ospfVirtIfEntry 10 }
+
+  ospfVirtIfAuthType OBJECT-TYPE
+       SYNTAX       OspfAuthenticationType
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The authentication type specified for a virtual interface.
+
+          Note that this object can be used to engage
+          in significant attacks against an OSPF router."
+       REFERENCE
+          "OSPF Version 2, Appendix E Authentication"
+       DEFVAL { none } -- no authentication, by default
+       ::= { ospfVirtIfEntry 11 }
+
+  ospfVirtIfLsaCount OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The total number of link-local link state advertisements
+          in this virtual interface's link-local link state database."
+       ::= { ospfVirtIfEntry 12 }
+
+  ospfVirtIfLsaCksumSum OBJECT-TYPE
+       SYNTAX       Unsigned32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit unsigned sum of the link state
+          advertisements' LS checksums contained in this
+          virtual interface's link-local link state database.
+          The sum can be used to determine if there has
+          been a change in the virtual interface's link state
+          database, and to compare the virtual interface
+          link state database of the virtual neighbors."
+       ::= { ospfVirtIfEntry 13 }
+
+--  OSPF Neighbor Table
+
+  ospfNbrTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfNbrEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "A table describing all non-virtual neighbors
+          in the locality of the OSPF router."
+       REFERENCE
+          "OSPF Version 2, Section 10 The Neighbor Data
+          Structure"
+       ::= { ospf 10 }
+
+  ospfNbrEntry OBJECT-TYPE
+       SYNTAX       OspfNbrEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The information regarding a single neighbor.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+
+          storage."
+       REFERENCE
+          "OSPF Version 2, Section 10 The Neighbor Data
+          Structure"
+       INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
+       ::= { ospfNbrTable 1 }
+
+  OspfNbrEntry ::=
+       SEQUENCE {
+          ospfNbrIpAddr
+             IpAddress,
+          ospfNbrAddressLessIndex
+             InterfaceIndexOrZero,
+          ospfNbrRtrId
+             RouterID,
+          ospfNbrOptions
+             Integer32,
+          ospfNbrPriority
+             DesignatedRouterPriority,
+          ospfNbrState
+             INTEGER,
+          ospfNbrEvents
+             Counter32,
+          ospfNbrLsRetransQLen
+             Gauge32,
+          ospfNbmaNbrStatus
+             RowStatus,
+          ospfNbmaNbrPermanence
+             INTEGER,
+          ospfNbrHelloSuppressed
+             TruthValue,
+          ospfNbrRestartHelperStatus
+             INTEGER,
+          ospfNbrRestartHelperAge
+             Unsigned32,
+          ospfNbrRestartHelperExitReason
+             INTEGER
+          }
+
+  ospfNbrIpAddr OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The IP address this neighbor is using in its
+          IP source address.  Note that, on addressless
+          links, this will not be 0.0.0.0 but the
+
+          address of another of the neighbor's interfaces."
+       ::= { ospfNbrEntry 1 }
+
+   ospfNbrAddressLessIndex OBJECT-TYPE
+       SYNTAX       InterfaceIndexOrZero
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "On an interface having an IP address, zero.
+          On addressless interfaces, the corresponding
+          value of ifIndex in the Internet Standard MIB.
+          On row creation, this can be derived from the
+          instance."
+        ::= { ospfNbrEntry 2 }
+
+  ospfNbrRtrId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "A 32-bit integer (represented as a type
+          IpAddress) uniquely identifying the neighboring
+          router in the Autonomous System."
+       DEFVAL { '00000000'H } -- 0.0.0.0
+       ::= { ospfNbrEntry 3 }
+
+  ospfNbrOptions OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "A bit mask corresponding to the neighbor's
+          options field.
+
+          Bit 0, if set, indicates that the system will
+          operate on Type of Service metrics other than
+          TOS 0.  If zero, the neighbor will ignore all
+          metrics except the TOS 0 metric.
+
+          Bit 1, if set, indicates that the associated
+          area accepts and operates on external
+          information; if zero, it is a stub area.
+
+          Bit 2, if set, indicates that the system is
+          capable of routing IP multicast datagrams, that is
+          that it implements the multicast extensions to
+          OSPF.
+
+          Bit 3, if set, indicates that the associated
+          area is an NSSA.  These areas are capable of
+          carrying type-7 external advertisements, which
+          are translated into type-5 external advertisements
+          at NSSA borders."
+       REFERENCE
+           "OSPF Version 2, Section 12.1.2 Options"
+       DEFVAL { 0 }
+       ::= { ospfNbrEntry 4 }
+
+   ospfNbrPriority OBJECT-TYPE
+       SYNTAX       DesignatedRouterPriority
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The priority of this neighbor in the designated
+          router election algorithm.  The value 0 signifies
+          that the neighbor is not eligible to become
+          the designated router on this particular network."
+       DEFVAL { 1 }
+       ::= { ospfNbrEntry 5 }
+
+   ospfNbrState OBJECT-TYPE
+        SYNTAX       INTEGER {
+                         down (1),
+                         attempt (2),
+                         init (3),
+                         twoWay (4),
+                         exchangeStart (5),
+                         exchange (6),
+                         loading (7),
+                         full (8)
+                         }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "The state of the relationship with this neighbor."
+         REFERENCE
+            "OSPF Version 2, Section 10.1 Neighbor States"
+         DEFVAL { down }
+         ::= { ospfNbrEntry 6 }
+
+  ospfNbrEvents OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of times this neighbor relationship
+          has changed state or an error has occurred.
+
+          Discontinuities in the value of this counter can occur
+          at re-initialization of the management system, and at other
+          times as indicated by the value of ospfDiscontinuityTime."
+       ::= { ospfNbrEntry 7 }
+
+  ospfNbrLsRetransQLen OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The current length of the retransmission
+          queue."
+       ::= { ospfNbrEntry 8 }
+
+  ospfNbmaNbrStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfNbrEntry 9 }
+
+  ospfNbmaNbrPermanence OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       dynamic (1), -- learned through protocol
+                       permanent (2) -- configured address
+                       }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This variable displays the status of the entry;
+          'dynamic' and 'permanent' refer to how the neighbor
+          became known."
+       DEFVAL { permanent }
+       ::= { ospfNbrEntry 10 }
+
+   ospfNbrHelloSuppressed OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Indicates whether Hellos are being suppressed
+          to the neighbor."
+       ::= { ospfNbrEntry 11 }
+
+  ospfNbrRestartHelperStatus OBJECT-TYPE
+       SYNTAX       INTEGER { notHelping (1),
+                              helping (2)
+                            }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Indicates whether the router is acting
+          as a graceful restart helper for the neighbor."
+          ::= { ospfNbrEntry 12 }
+
+  ospfNbrRestartHelperAge OBJECT-TYPE
+       SYNTAX       Unsigned32
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Remaining time in current OSPF graceful restart
+          interval, if the router is acting as a restart
+          helper for the neighbor."
+       ::= { ospfNbrEntry 13 }
+
+  ospfNbrRestartHelperExitReason OBJECT-TYPE
+       SYNTAX       INTEGER { none (1),           -- not attempted
+                              inProgress (2),     -- restart in
+                                                  -- progress
+                              completed (3),      -- successfully
+                                                  -- completed
+                              timedOut (4),       -- timed out
+                              topologyChanged (5) -- aborted due to
+                                                  -- topology
+                                                  -- change.
+                            }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Describes the outcome of the last attempt at acting
+           as a graceful restart helper for the neighbor."
+       ::= { ospfNbrEntry 14 }
+
+--  OSPF Virtual Neighbor Table
+
+  ospfVirtNbrTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfVirtNbrEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "This table describes all virtual neighbors.
+          Since virtual links are configured
+          in the Virtual Interface Table, this table is read-only."
+       REFERENCE
+          "OSPF Version 2, Section 15 Virtual Links"
+       ::= { ospf 11 }
+
+  ospfVirtNbrEntry OBJECT-TYPE
+       SYNTAX       OspfVirtNbrEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "Virtual neighbor information."
+       INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
+       ::= { ospfVirtNbrTable 1 }
+
+  OspfVirtNbrEntry ::=
+       SEQUENCE {
+          ospfVirtNbrArea
+             AreaID,
+          ospfVirtNbrRtrId
+             RouterID,
+          ospfVirtNbrIpAddr
+             IpAddress,
+          ospfVirtNbrOptions
+             Integer32,
+          ospfVirtNbrState
+             INTEGER,
+          ospfVirtNbrEvents
+             Counter32,
+          ospfVirtNbrLsRetransQLen
+             Gauge32,
+          ospfVirtNbrHelloSuppressed
+             TruthValue,
+          ospfVirtNbrRestartHelperStatus
+             INTEGER,
+          ospfVirtNbrRestartHelperAge
+             Unsigned32,
+          ospfVirtNbrRestartHelperExitReason
+             INTEGER
+          }
+
+  ospfVirtNbrArea OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The Transit Area Identifier."
+       ::= { ospfVirtNbrEntry 1 }
+
+  ospfVirtNbrRtrId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS      current
+       DESCRIPTION
+          "A 32-bit integer uniquely identifying the
+          neighboring router in the Autonomous System."
+       ::= { ospfVirtNbrEntry 2 }
+
+  ospfVirtNbrIpAddr OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The IP address this virtual neighbor is using."
+       ::= { ospfVirtNbrEntry 3 }
+
+  ospfVirtNbrOptions OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "A bit mask corresponding to the neighbor's
+          options field.
+
+          Bit 1, if set, indicates that the system will
+          operate on Type of Service metrics other than
+          TOS 0.  If zero, the neighbor will ignore all
+          metrics except the TOS 0 metric.
+
+          Bit 2, if set, indicates that the system is
+          network multicast capable, i.e., that it
+          implements OSPF multicast routing."
+       ::= { ospfVirtNbrEntry 4 }
+
+   ospfVirtNbrState OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       down (1),
+                       attempt (2),
+                       init (3),
+                       twoWay (4),
+                       exchangeStart (5),
+                       exchange (6),
+                       loading (7),
+                       full (8)
+                       }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The state of the virtual neighbor relationship."
+       ::= { ospfVirtNbrEntry 5 }
+
+  ospfVirtNbrEvents OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The number of times this virtual link has
+          changed its state or an error has occurred.
+
+          Discontinuities in the value of this counter can occur
+          at re-initialization of the management system, and at other
+          times as indicated by the value of ospfDiscontinuityTime."
+       ::= { ospfVirtNbrEntry 6 }
+
+  ospfVirtNbrLsRetransQLen OBJECT-TYPE
+       SYNTAX       Gauge32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The current length of the retransmission
+          queue."
+       ::= { ospfVirtNbrEntry 7 }
+
+  ospfVirtNbrHelloSuppressed OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Indicates whether Hellos are being suppressed
+          to the neighbor."
+       ::= { ospfVirtNbrEntry 8 }
+
+  ospfVirtNbrRestartHelperStatus OBJECT-TYPE
+       SYNTAX       INTEGER { notHelping (1),
+                              helping (2)
+                            }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Indicates whether the router is acting
+          as a graceful restart helper for the neighbor."
+       ::= { ospfVirtNbrEntry 9 }
+
+  ospfVirtNbrRestartHelperAge OBJECT-TYPE
+       SYNTAX       Unsigned32
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Remaining time in current OSPF graceful restart
+          interval, if the router is acting as a restart
+          helper for the neighbor."
+       ::= { ospfVirtNbrEntry 10 }
+
+  ospfVirtNbrRestartHelperExitReason OBJECT-TYPE
+       SYNTAX       INTEGER { none (1),           -- not attempted
+                              inProgress (2),     -- restart in
+                                                  -- progress
+                              completed (3),      -- successfully
+                                                  -- completed
+                              timedOut (4),       -- timed out
+                              topologyChanged (5) -- aborted due to
+                                                  -- topology
+                                                  -- change.
+                            }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "Describes the outcome of the last attempt at acting
+           as a graceful restart helper for the neighbor."
+       ::= { ospfVirtNbrEntry 11 }
+
+--  OSPF Link State Database, External
+
+  ospfExtLsdbTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfExtLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       deprecated
+       DESCRIPTION
+          "The OSPF Process's external LSA link state database.
+
+          This table is identical to the OSPF LSDB Table
+          in format, but contains only external link state
+          advertisements.  The purpose is to allow external
+
+          LSAs to be displayed once for the router rather
+          than once in each non-stub area.
+
+          Note that external LSAs are also in the AS-scope link state
+          database."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State Advertisements"
+       ::= { ospf 12 }
+
+  ospfExtLsdbEntry OBJECT-TYPE
+       SYNTAX       OspfExtLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       deprecated
+       DESCRIPTION
+          "A single link state advertisement."
+       INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
+       ::= { ospfExtLsdbTable 1 }
+
+  OspfExtLsdbEntry ::=
+       SEQUENCE {
+          ospfExtLsdbType
+             INTEGER,
+          ospfExtLsdbLsid
+             IpAddress,
+          ospfExtLsdbRouterId
+             RouterID,
+          ospfExtLsdbSequence
+             Integer32,
+          ospfExtLsdbAge
+             Integer32,
+          ospfExtLsdbChecksum
+             Integer32,
+          ospfExtLsdbAdvertisement
+             OCTET STRING
+          }
+
+  ospfExtLsdbType OBJECT-TYPE
+       SYNTAX      INTEGER {
+                      asExternalLink (5)
+                      }
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       deprecated
+       DESCRIPTION
+          "The type of the link state advertisement.
+          Each link state type has a separate advertisement
+          format."
+       REFERENCE
+          "OSPF Version 2, Appendix A.4.1 The Link State
+          Advertisement header"
+       ::= { ospfExtLsdbEntry 1 }
+
+  ospfExtLsdbLsid OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       deprecated
+       DESCRIPTION
+          "The Link State ID is an LS Type Specific field
+          containing either a Router ID or an IP address;
+          it identifies the piece of the routing domain
+          that is being described by the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.4 Link State ID"
+       ::= { ospfExtLsdbEntry 2 }
+
+  ospfExtLsdbRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       deprecated
+       DESCRIPTION
+          "The 32-bit number that uniquely identifies the
+          originating router in the Autonomous System."
+       REFERENCE
+          "OSPF Version 2, Appendix C.1 Global parameters"
+       ::= { ospfExtLsdbEntry 3 }
+
+  ospfExtLsdbSequence OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       deprecated
+       DESCRIPTION
+          "The sequence number field is a signed 32-bit
+          integer.  It starts with the value '80000001'h,
+          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+          Thus, a typical sequence number will be very negative.
+          It is used to detect old and duplicate link state
+          advertisements.  The space of sequence numbers is linearly
+          ordered.  The larger the sequence number, the more recent
+          the advertisement."
+       REFERENCE
+          "OSPF Version  2,  Section  12.1.6  LS  sequence
+          number"
+       ::= { ospfExtLsdbEntry 4 }
+
+  ospfExtLsdbAge OBJECT-TYPE
+       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
+                              -- doNotAge bit is set
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       deprecated
+       DESCRIPTION
+          "This field is the age of the link state
+          advertisement in seconds."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.1 LS age"
+       ::= { ospfExtLsdbEntry 5 }
+
+  ospfExtLsdbChecksum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       deprecated
+       DESCRIPTION
+          "This field is the checksum of the complete
+          contents of the advertisement, excepting the
+          age field.  The age field is excepted so that
+          an advertisement's age can be incremented
+          without updating the checksum.  The checksum
+          used is the same that is used for ISO
+          connectionless datagrams; it is commonly referred
+          to as the Fletcher checksum."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.7 LS checksum"
+       ::= { ospfExtLsdbEntry 6 }
+
+  ospfExtLsdbAdvertisement OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE(36))
+       MAX-ACCESS   read-only
+       STATUS       deprecated
+       DESCRIPTION
+          "The entire link state advertisement, including
+          its header."
+       REFERENCE
+          "OSPF Version 2, Section 12  Link State
+          Advertisements"
+       ::= { ospfExtLsdbEntry 7 }
+
+--  OSPF Use of the CIDR Route Table
+
+  ospfRouteGroup    OBJECT IDENTIFIER ::= { ospf 13 }
+
+--     The IP Forwarding Table defines a number of objects for use by
+--     the routing protocol to externalize its information.  Most of
+
+--     the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
+--     ipForwardNextHop, ipForwardIfIndex, ipForwardType,
+--     ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
+--     defined there.
+
+--     Those that leave some discretion are defined here.
+
+--     ipCidrRouteProto is, of course, ospf (13).
+
+--     ipCidrRouteAge is the time since the route was first
+--     calculated, as opposed to the time since the last SPF run.
+--     ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
+--     protocol.  The following values shall be found there depending
+--     on the way the route was calculated.
+
+  ospfIntraArea      OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
+  ospfInterArea      OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
+  ospfExternalType1  OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
+  ospfExternalType2  OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }
+
+--     ipCidrRouteMetric1 is, by definition, the primary routing
+--     metric.  Therefore, it should be the metric that route
+--     selection is based on.  For intra-area and inter-area routes,
+--     it is an OSPF metric.  For External Type 1 (comparable value)
+--     routes, it is an OSPF metric plus the External Metric.  For
+--     external Type 2 (non-comparable value) routes, it is the
+--     external metric.
+
+--     ipCidrRouteMetric2 is, by definition, a secondary routing
+--     metric.  Therefore, it should be the metric that breaks a tie
+--     among routes having equal metric1 values and the same
+--     calculation rule.  For intra-area, inter-area routes, and
+--     External Type 1 (comparable value) routes, it is unused.  For
+--     External Type 2 (non-comparable value) routes, it is the metric
+--     to the AS border router.
+
+--     ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5
+--     are unused.
+
+--  The OSPF Area Aggregate Table
+--
+--     This table replaces the OSPF Area Summary Table, being an
+--     extension of that for CIDR routers.
+
+   ospfAreaAggregateTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfAreaAggregateEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Area Aggregate Table acts as an adjunct
+           to the Area Table.  It describes those address aggregates
+           that are configured to be propagated from an area.
+           Its purpose is to reduce the amount of information
+           that is known beyond an Area's borders.
+
+           It contains a set of IP address ranges
+           specified by an IP address/IP network mask pair.
+           For example, a class B address range of X.X.X.X
+           with a network mask of 255.255.0.0 includes all IP
+           addresses from X.X.0.0 to X.X.255.255.
+
+           Note that if ranges are configured such that one range
+           subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
+           and 10.1.0.0 mask 255.255.0.0),
+           the most specific match is the preferred one."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2  Area parameters"
+       ::= { ospf 14 }
+
+  ospfAreaAggregateEntry OBJECT-TYPE
+       SYNTAX   OspfAreaAggregateEntry
+       MAX-ACCESS   not-accessible
+       STATUS   current
+       DESCRIPTION
+          "A single area aggregate entry.
+
+          Information in this table is persistent and when this object
+          is written the entity SHOULD save the change to non-volatile
+          storage."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2  Area parameters"
+       INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
+          ospfAreaAggregateNet, ospfAreaAggregateMask }
+       ::= { ospfAreaAggregateTable 1 }
+
+  OspfAreaAggregateEntry ::=
+       SEQUENCE {
+          ospfAreaAggregateAreaID
+             AreaID,
+          ospfAreaAggregateLsdbType
+             INTEGER,
+          ospfAreaAggregateNet
+             IpAddress,
+          ospfAreaAggregateMask
+             IpAddress,
+          ospfAreaAggregateStatus
+
+             RowStatus,
+          ospfAreaAggregateEffect
+             INTEGER,
+          ospfAreaAggregateExtRouteTag
+             Unsigned32
+          }
+
+  ospfAreaAggregateAreaID OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The area within which the address aggregate is to be
+          found."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaAggregateEntry 1 }
+
+  ospfAreaAggregateLsdbType OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       summaryLink (3),
+                       nssaExternalLink (7)
+                       }
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS       current
+       DESCRIPTION
+          "The type of the address aggregate.  This field
+          specifies the Lsdb type that this address
+          aggregate applies to."
+       REFERENCE
+          "OSPF Version 2, Appendix A.4.1 The Link State
+          Advertisement header"
+       ::= { ospfAreaAggregateEntry 2 }
+
+  ospfAreaAggregateNet OBJECT-TYPE
+       SYNTAX   IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS   current
+       DESCRIPTION
+          "The IP address of the net or subnet indicated
+          by the range."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaAggregateEntry 3 }
+
+  ospfAreaAggregateMask OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only -- read-only since originally an
+                              -- SMIv1 index
+       STATUS      current
+       DESCRIPTION
+          "The subnet mask that pertains to the net or
+          subnet."
+       REFERENCE
+          "OSPF Version 2, Appendix C.2 Area parameters"
+       ::= { ospfAreaAggregateEntry 4 }
+
+  ospfAreaAggregateStatus OBJECT-TYPE
+       SYNTAX       RowStatus
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "This object permits management of the table by
+          facilitating actions such as row creation,
+          construction, and destruction.
+
+          The value of this object has no effect on
+          whether other objects in this conceptual row can be
+          modified."
+       ::= { ospfAreaAggregateEntry 5 }
+
+  ospfAreaAggregateEffect OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       advertiseMatching (1),
+                       doNotAdvertiseMatching (2)
+                       }
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "Subnets subsumed by ranges either trigger the
+          advertisement of the indicated aggregate
+         (advertiseMatching) or result in the subnet's not
+          being advertised at all outside the area."
+       DEFVAL { advertiseMatching }
+       ::= { ospfAreaAggregateEntry 6 }
+
+  ospfAreaAggregateExtRouteTag OBJECT-TYPE
+       SYNTAX       Unsigned32
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "External route tag to be included in NSSA (type-7)
+           LSAs."
+       DEFVAL { 0 }
+       ::= { ospfAreaAggregateEntry 7 }
+
+--  OSPF Link State Database, link-local for non-virtual links
+
+  ospfLocalLsdbTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfLocalLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The OSPF Process's link-local link state database
+          for non-virtual links.
+          This table is identical to the OSPF LSDB Table
+          in format, but contains only link-local Link State
+          Advertisements for non-virtual links.  The purpose is
+          to allow link-local LSAs to be displayed for each
+          non-virtual interface.  This table is implemented to
+          support type-9 LSAs that are defined
+          in 'The OSPF Opaque LSA Option'."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State Advertisements
+          and The OSPF Opaque LSA Option"
+       ::= { ospf 17 }
+
+  ospfLocalLsdbEntry OBJECT-TYPE
+       SYNTAX       OspfLocalLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "A single link state advertisement."
+       INDEX { ospfLocalLsdbIpAddress, ospfLocalLsdbAddressLessIf,
+          ospfLocalLsdbType, ospfLocalLsdbLsid, ospfLocalLsdbRouterId
+          }
+       ::= { ospfLocalLsdbTable 1 }
+
+  OspfLocalLsdbEntry ::=
+       SEQUENCE {
+          ospfLocalLsdbIpAddress
+             IpAddress,
+          ospfLocalLsdbAddressLessIf
+             InterfaceIndexOrZero,
+          ospfLocalLsdbType
+             INTEGER,
+          ospfLocalLsdbLsid
+             IpAddress,
+          ospfLocalLsdbRouterId
+             RouterID,
+          ospfLocalLsdbSequence
+             Integer32,
+          ospfLocalLsdbAge
+             Integer32,
+          ospfLocalLsdbChecksum
+             Integer32,
+          ospfLocalLsdbAdvertisement
+             OCTET STRING
+          }
+
+  ospfLocalLsdbIpAddress OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The IP address of the interface from
+          which the LSA was received if the interface is
+          numbered."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3 Interface parameters"
+       ::= { ospfLocalLsdbEntry 1 }
+
+  ospfLocalLsdbAddressLessIf OBJECT-TYPE
+       SYNTAX       InterfaceIndexOrZero
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The interface index of the interface from
+          which the LSA was received if the interface is
+          unnumbered."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3 Interface parameters"
+       ::= { ospfLocalLsdbEntry 2 }
+
+  ospfLocalLsdbType OBJECT-TYPE
+       SYNTAX       INTEGER { localOpaqueLink (9) }
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The type of the link state advertisement.
+          Each link state type has a separate
+          advertisement format."
+       REFERENCE
+          "OSPF Version 2, Appendix A.4.1 The Link State
+          Advertisement header"
+       ::= { ospfLocalLsdbEntry 3 }
+
+  ospfLocalLsdbLsid OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Link State ID is an LS Type Specific field
+          containing a 32-bit identifier in IP address format;
+          it identifies the piece of the routing domain
+          that is being described by the advertisement."
+       REFERENCE
+         "OSPF Version 2, Section 12.1.4 Link State ID"
+       ::= { ospfLocalLsdbEntry 4 }
+
+  ospfLocalLsdbRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit number that uniquely identifies the
+          originating router in the Autonomous System."
+       REFERENCE
+          "OSPF Version 2, Appendix C.1 Global parameters"
+       ::= { ospfLocalLsdbEntry 5 }
+
+  ospfLocalLsdbSequence OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The sequence number field is a signed 32-bit
+          integer.  It starts with the value '80000001'h,
+          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+          Thus, a typical sequence number will be very negative.
+          It is used to detect old and duplicate link state
+          advertisements.  The space of sequence numbers is linearly
+          ordered.  The larger the sequence number, the more recent
+          the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.6 LS sequence
+          number"
+       ::= { ospfLocalLsdbEntry 6 }
+
+  ospfLocalLsdbAge OBJECT-TYPE
+       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
+                              -- doNotAge bit is set
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the age of the link state
+          advertisement in seconds."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.1 LS age"
+       ::= { ospfLocalLsdbEntry 7 }
+
+  ospfLocalLsdbChecksum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the checksum of the complete
+          contents of the advertisement, excepting the
+          age field.  The age field is excepted so that
+          an advertisement's age can be incremented
+          without updating the checksum.  The checksum
+          used is the same that is used for ISO
+          connectionless datagrams; it is commonly referred
+          to as the Fletcher checksum."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.7 LS checksum"
+       ::= { ospfLocalLsdbEntry 8 }
+
+  ospfLocalLsdbAdvertisement OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE (1..65535))
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The entire link state advertisement, including
+          its header.
+
+          Note that for variable length LSAs, SNMP agents
+          may not be able to return the largest string size."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State
+          Advertisements"
+       ::= { ospfLocalLsdbEntry 9 }
+
+--  OSPF Link State Database, link-local for virtual Links
+
+  ospfVirtLocalLsdbTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfVirtLocalLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The OSPF Process's link-local link state database
+          for virtual links.
+
+          This table is identical to the OSPF LSDB Table
+          in format, but contains only link-local Link State
+          Advertisements for virtual links.  The purpose is to
+          allow link-local LSAs to be displayed for each virtual
+          interface.  This table is implemented to support type-9 LSAs
+          that are defined in 'The OSPF Opaque LSA Option'."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State
+          Advertisements and The OSPF Opaque LSA Option"
+       ::= { ospf 18 }
+
+  ospfVirtLocalLsdbEntry OBJECT-TYPE
+       SYNTAX       OspfVirtLocalLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "A single link state advertisement."
+       INDEX { ospfVirtLocalLsdbTransitArea,
+          ospfVirtLocalLsdbNeighbor,
+          ospfVirtLocalLsdbType,
+          ospfVirtLocalLsdbLsid,
+          ospfVirtLocalLsdbRouterId
+          }
+       ::= { ospfVirtLocalLsdbTable 1 }
+
+  OspfVirtLocalLsdbEntry ::=
+       SEQUENCE {
+          ospfVirtLocalLsdbTransitArea
+             AreaID,
+          ospfVirtLocalLsdbNeighbor
+             RouterID,
+          ospfVirtLocalLsdbType
+             INTEGER,
+          ospfVirtLocalLsdbLsid
+             IpAddress,
+          ospfVirtLocalLsdbRouterId
+             RouterID,
+          ospfVirtLocalLsdbSequence
+             Integer32,
+          ospfVirtLocalLsdbAge
+             Integer32,
+          ospfVirtLocalLsdbChecksum
+             Integer32,
+          ospfVirtLocalLsdbAdvertisement
+            OCTET STRING
+          }
+
+  ospfVirtLocalLsdbTransitArea OBJECT-TYPE
+       SYNTAX       AreaID
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The transit area that the virtual link
+          traverses.  By definition, this is not 0.0.0.0."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3 Interface parameters"
+       ::= { ospfVirtLocalLsdbEntry 1 }
+
+  ospfVirtLocalLsdbNeighbor OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Router ID of the virtual neighbor."
+       REFERENCE
+          "OSPF Version 2, Appendix C.3 Interface parameters"
+       ::= { ospfVirtLocalLsdbEntry 2 }
+
+  ospfVirtLocalLsdbType OBJECT-TYPE
+       SYNTAX       INTEGER  { localOpaqueLink (9) }
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The type of the link state advertisement.
+          Each link state type has a separate
+          advertisement format."
+       REFERENCE
+          "OSPF Version 2, Appendix A.4.1 The Link State
+          Advertisement header"
+       ::= { ospfVirtLocalLsdbEntry 3 }
+
+  ospfVirtLocalLsdbLsid OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Link State ID is an LS Type Specific field
+          containing a 32-bit identifier in IP address format;
+          it identifies the piece of the routing domain
+          that is being described by the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.4 Link State ID"
+       ::= { ospfVirtLocalLsdbEntry 4 }
+
+  ospfVirtLocalLsdbRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit number that uniquely identifies the
+          originating router in the Autonomous System."
+       REFERENCE
+          "OSPF Version 2, Appendix C.1 Global parameters"
+       ::= { ospfVirtLocalLsdbEntry 5 }
+
+  ospfVirtLocalLsdbSequence OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The sequence number field is a signed 32-bit
+          integer.  It starts with the value '80000001'h,
+          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+          Thus, a typical sequence number will be very negative.
+          It is used to detect old and duplicate link state
+          advertisements.  The space of sequence numbers is linearly
+          ordered.  The larger the sequence number, the more recent
+          the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.6 LS sequence
+          number"
+       ::= { ospfVirtLocalLsdbEntry 6 }
+
+  ospfVirtLocalLsdbAge OBJECT-TYPE
+       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
+                              -- doNotAge bit is set
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the age of the link state
+          advertisement in seconds."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.1 LS age"
+       ::= { ospfVirtLocalLsdbEntry 7 }
+
+  ospfVirtLocalLsdbChecksum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the checksum of the complete
+          contents of the advertisement, excepting the
+          age field.  The age field is excepted so that
+
+          an advertisement's age can be incremented
+          without updating the checksum.  The checksum
+          used is the same that is used for ISO
+          connectionless datagrams; it is commonly
+          referred to as the Fletcher checksum."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.7 LS checksum"
+       ::= { ospfVirtLocalLsdbEntry 8 }
+
+  ospfVirtLocalLsdbAdvertisement OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE (1..65535))
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The entire link state advertisement, including
+          its header."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State
+          Advertisements.
+
+          Note that for variable length LSAs, SNMP agents
+          may not be able to return the largest string size."
+       ::= { ospfVirtLocalLsdbEntry 9 }
+
+--  OSPF Link State Database, AS-scope
+
+  ospfAsLsdbTable OBJECT-TYPE
+       SYNTAX       SEQUENCE OF OspfAsLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The OSPF Process's AS-scope LSA link state database.
+           The database contains the AS-scope Link State
+           Advertisements from throughout the areas that
+           the device is attached to.
+
+           This table is identical to the OSPF LSDB Table
+           in format, but contains only AS-scope Link State
+           Advertisements.  The purpose is to allow AS-scope
+           LSAs to be displayed once for the router rather
+           than once in each non-stub area."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State
+          Advertisements"
+       ::= { ospf 19 }
+
+  ospfAsLsdbEntry OBJECT-TYPE
+       SYNTAX       OspfAsLsdbEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "A single link state advertisement."
+       INDEX { ospfAsLsdbType, ospfAsLsdbLsid, ospfAsLsdbRouterId }
+       ::= { ospfAsLsdbTable 1 }
+
+  OspfAsLsdbEntry ::=
+       SEQUENCE {
+          ospfAsLsdbType
+             INTEGER,
+          ospfAsLsdbLsid
+             IpAddress,
+          ospfAsLsdbRouterId
+             RouterID,
+          ospfAsLsdbSequence
+             Integer32,
+          ospfAsLsdbAge
+             Integer32,
+          ospfAsLsdbChecksum
+             Integer32,
+          ospfAsLsdbAdvertisement
+             OCTET STRING
+          }
+
+  ospfAsLsdbType OBJECT-TYPE
+       SYNTAX      INTEGER {
+                      asExternalLink (5),
+                      asOpaqueLink   (11)
+                      }
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The type of the link state advertisement.
+          Each link state type has a separate
+          advertisement format."
+       REFERENCE
+          "OSPF Version 2, Appendix A.4.1 The Link State
+          Advertisement header"
+       ::= { ospfAsLsdbEntry 1 }
+
+  ospfAsLsdbLsid OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The Link State ID is an LS Type Specific field
+          containing either a Router ID or an IP address;
+
+          it identifies the piece of the routing domain
+          that is being described by the advertisement."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.4 Link State ID"
+       ::= { ospfAsLsdbEntry 2 }
+
+  ospfAsLsdbRouterId OBJECT-TYPE
+       SYNTAX       RouterID
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "The 32-bit number that uniquely identifies the
+          originating router in the Autonomous System."
+       REFERENCE
+          "OSPF Version 2, Appendix C.1 Global parameters"
+       ::= { ospfAsLsdbEntry 3 }
+
+  ospfAsLsdbSequence OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The sequence number field is a signed 32-bit
+          integer.  It starts with the value '80000001'h,
+          or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+          Thus, a typical sequence number will be very negative.
+          It is used to detect old and duplicate link state
+          advertisements.  The space of sequence numbers is linearly
+          ordered.  The larger the sequence number, the more recent
+          the advertisement."
+       REFERENCE
+          "OSPF Version  2,  Section  12.1.6  LS  sequence
+          number"
+       ::= { ospfAsLsdbEntry 4 }
+
+  ospfAsLsdbAge OBJECT-TYPE
+       SYNTAX       Integer32 -- Should be 0..MaxAge, except when
+                              -- doNotAge bit is set
+       UNITS        "seconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the age of the link state
+          advertisement in seconds."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.1 LS age"
+       ::= { ospfAsLsdbEntry 5 }
+
+  ospfAsLsdbChecksum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This field is the checksum of the complete
+          contents of the advertisement, excepting the
+          age field.  The age field is excepted so that
+          an advertisement's age can be incremented
+          without updating the checksum.  The checksum
+          used is the same that is used for ISO
+          connectionless datagrams; it is commonly referred
+          to as the Fletcher checksum."
+       REFERENCE
+          "OSPF Version 2, Section 12.1.7 LS checksum"
+       ::= { ospfAsLsdbEntry 6 }
+
+  ospfAsLsdbAdvertisement OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE (1..65535))
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The entire link state advertisement, including
+          its header."
+       REFERENCE
+          "OSPF Version 2, Section 12 Link State
+          Advertisements.
+
+          Note that for variable length LSAs, SNMP agents
+          may not be able to return the largest string size."
+       ::= { ospfAsLsdbEntry 7 }
+
+ --  OSPF Area LSA Counter Table
+
+      ospfAreaLsaCountTable OBJECT-TYPE
+          SYNTAX       SEQUENCE OF OspfAreaLsaCountEntry
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+             "This table maintains per-area, per-LSA-type counters"
+          ::= { ospf 20 }
+
+      ospfAreaLsaCountEntry OBJECT-TYPE
+          SYNTAX       OspfAreaLsaCountEntry
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+             "An entry with a number of link advertisements
+
+              of a given type for a given area."
+          INDEX { ospfAreaLsaCountAreaId, ospfAreaLsaCountLsaType }
+          ::= { ospfAreaLsaCountTable 1 }
+
+      OspfAreaLsaCountEntry ::=
+           SEQUENCE {
+              ospfAreaLsaCountAreaId
+                 AreaID,
+              ospfAreaLsaCountLsaType
+                 INTEGER,
+              ospfAreaLsaCountNumber
+                 Gauge32
+           }
+
+      ospfAreaLsaCountAreaId OBJECT-TYPE
+          SYNTAX       AreaID
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+             "This entry Area ID."
+         ::= { ospfAreaLsaCountEntry 1 }
+
+      ospfAreaLsaCountLsaType OBJECT-TYPE
+          SYNTAX       INTEGER {
+                          routerLink (1),
+                          networkLink (2),
+                          summaryLink (3),
+                          asSummaryLink (4),
+                          multicastLink (6),
+                          nssaExternalLink (7),
+                          areaOpaqueLink (10)
+                       }
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+             "This entry LSA type."
+         ::= { ospfAreaLsaCountEntry 2 }
+
+      ospfAreaLsaCountNumber OBJECT-TYPE
+          SYNTAX       Gauge32
+          MAX-ACCESS   read-only
+          STATUS       current
+          DESCRIPTION
+             "Number of LSAs of a given type for a given area."
+         ::= { ospfAreaLsaCountEntry 3 }
+
+-- conformance information
+
+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }
+
+ospfGroups      OBJECT IDENTIFIER ::= { ospfConformance 1 }
+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }
+
+-- compliance statements
+
+  ospfCompliance MODULE-COMPLIANCE
+       STATUS       deprecated
+       DESCRIPTION
+          "The compliance statement for OSPF systems
+          conforming to RFC 1850."
+       MODULE       -- this module
+       MANDATORY-GROUPS {
+           ospfBasicGroup,
+           ospfAreaGroup,
+           ospfStubAreaGroup,
+           ospfIfGroup,
+           ospfIfMetricGroup,
+           ospfVirtIfGroup,
+           ospfNbrGroup,
+           ospfVirtNbrGroup,
+           ospfAreaAggregateGroup
+           }
+       GROUP  ospfHostGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that support
+             attached hosts."
+       GROUP  ospfLsdbGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             their per-area link state database."
+       GROUP  ospfExtLsdbGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             their external link state database."
+       ::= { ospfCompliances 1 }
+
+  ospfCompliance2 MODULE-COMPLIANCE
+       STATUS       current
+       DESCRIPTION
+          "The compliance statement."
+       MODULE       -- this module
+       MANDATORY-GROUPS {
+          ospfBasicGroup2,
+          ospfAreaGroup2,
+          ospfStubAreaGroup,
+          ospfIfGroup2,
+          ospfIfMetricGroup,
+          ospfVirtIfGroup2,
+          ospfNbrGroup2,
+          ospfVirtNbrGroup2,
+          ospfAreaAggregateGroup2
+          }
+       GROUP  ospfHostGroup2
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that support
+             attached hosts."
+       GROUP  ospfLsdbGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             their per-area link state database."
+       GROUP  ospfAsLsdbGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             their AS-scope link state database."
+       GROUP  ospfLocalLsdbGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             their per-link link state database for non-virtual
+             links."
+       GROUP  ospfVirtLocalLsdbGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             their per-link link state database for virtual links."
+       GROUP ospfAreaLsaCountGroup
+          DESCRIPTION
+             "This group is mandatory for OSPF systems that display
+             per-area, per-LSA-type counters."
+       ::= { ospfCompliances 2 }
+
+  ospfComplianceObsolete MODULE-COMPLIANCE
+       STATUS       obsolete
+       DESCRIPTION
+          "Contains obsolete object groups."
+       MODULE       -- this module
+       GROUP  ospfAreaRangeGroup
+          DESCRIPTION
+             "This group is obsolete, and it is mandatory only
+             for non-Classless Inter-Domain Routing (CIDR) OSPF
+             systems that support multiple areas."
+       GROUP  ospfObsoleteGroup
+          DESCRIPTION
+             "This group contains obsolete objects,
+             which are no longer required for OSPF systems."
+       ::= { ospfCompliances 3 }
+
+--  units of conformance
+
+  ospfBasicGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfRouterId,
+          ospfAdminStat,
+          ospfVersionNumber,
+          ospfAreaBdrRtrStatus,
+          ospfASBdrRtrStatus,
+          ospfExternLsaCount,
+          ospfExternLsaCksumSum,
+          ospfTOSSupport,
+          ospfOriginateNewLsas,
+          ospfRxNewLsas,
+          ospfExtLsdbLimit,
+          ospfMulticastExtensions,
+          ospfExitOverflowInterval,
+          ospfDemandExtensions
+          }
+       STATUS      deprecated
+       DESCRIPTION
+          "These objects are used to monitor/manage
+          global OSPF parameters.  This object group
+          conforms to RFC 1850."
+       ::= { ospfGroups 1 }
+
+  ospfAreaGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfAreaId,
+          ospfImportAsExtern,
+          ospfSpfRuns,
+          ospfAreaBdrRtrCount,
+          ospfAsBdrRtrCount,
+          ospfAreaLsaCount,
+          ospfAreaLsaCksumSum,
+          ospfAreaSummary,
+          ospfAreaStatus
+          }
+       STATUS      deprecated
+       DESCRIPTION
+          "These objects are used for OSPF systems
+          supporting areas per RFC 1850."
+       ::= { ospfGroups 2 }
+
+  ospfStubAreaGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfStubAreaId,
+          ospfStubTOS,
+          ospfStubMetric,
+          ospfStubStatus,
+          ospfStubMetricType
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used for OSPF systems
+          supporting stub areas."
+       ::= { ospfGroups 3 }
+
+   ospfLsdbGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfLsdbAreaId,
+          ospfLsdbType,
+          ospfLsdbLsid,
+          ospfLsdbRouterId,
+          ospfLsdbSequence,
+          ospfLsdbAge,
+          ospfLsdbChecksum,
+          ospfLsdbAdvertisement
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used for OSPF systems
+          that display their link state database."
+       ::= { ospfGroups 4 }
+
+   ospfAreaRangeGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfAreaRangeAreaId,
+          ospfAreaRangeNet,
+          ospfAreaRangeMask,
+          ospfAreaRangeStatus,
+          ospfAreaRangeEffect
+          }
+       STATUS  obsolete
+       DESCRIPTION
+          "These objects are used for non-CIDR OSPF
+          systems that support multiple areas.  This
+          object group is obsolete."
+       ::= { ospfGroups 5 }
+
+  ospfHostGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfHostIpAddress,
+          ospfHostTOS,
+          ospfHostMetric,
+          ospfHostStatus,
+          ospfHostAreaID
+          }
+       STATUS       deprecated
+       DESCRIPTION
+          "These objects are used for OSPF systems
+          that support attached hosts."
+       ::= { ospfGroups 6 }
+
+  ospfIfGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfIfAreaId,
+          ospfIfType,
+          ospfIfAdminStat,
+          ospfIfRtrPriority,
+          ospfIfTransitDelay,
+          ospfIfRetransInterval,
+          ospfIfHelloInterval,
+          ospfIfRtrDeadInterval,
+          ospfIfPollInterval,
+          ospfIfState,
+          ospfIfDesignatedRouter,
+          ospfIfBackupDesignatedRouter,
+          ospfIfEvents,
+          ospfIfAuthType,
+          ospfIfAuthKey,
+          ospfIfStatus,
+          ospfIfMulticastForwarding,
+          ospfIfDemand
+          }
+       STATUS       deprecated
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF
+          interfaces.  This object group conforms to RFC 1850."
+       ::= { ospfGroups 7 }
+
+  ospfIfMetricGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfIfMetricIpAddress,
+          ospfIfMetricAddressLessIf,
+          ospfIfMetricTOS,
+          ospfIfMetricValue,
+          ospfIfMetricStatus
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used for OSPF systems for supporting
+
+          interface metrics."
+       ::= { ospfGroups 8 }
+
+  ospfVirtIfGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfVirtIfAreaId,
+          ospfVirtIfNeighbor,
+          ospfVirtIfTransitDelay,
+          ospfVirtIfRetransInterval,
+          ospfVirtIfHelloInterval,
+          ospfVirtIfRtrDeadInterval,
+          ospfVirtIfState,
+          ospfVirtIfEvents,
+          ospfVirtIfAuthType,
+          ospfVirtIfAuthKey,
+          ospfVirtIfStatus
+          }
+        STATUS       deprecated
+        DESCRIPTION
+          "These objects are used for OSPF systems for supporting
+          virtual interfaces.  This object group conforms
+          to RFC 1850."
+        ::= { ospfGroups 9 }
+
+  ospfNbrGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfNbrIpAddr,
+          ospfNbrAddressLessIndex,
+          ospfNbrRtrId,
+          ospfNbrOptions,
+          ospfNbrPriority,
+          ospfNbrState,
+          ospfNbrEvents,
+          ospfNbrLsRetransQLen,
+          ospfNbmaNbrStatus,
+          ospfNbmaNbrPermanence,
+          ospfNbrHelloSuppressed
+          }
+       STATUS       deprecated
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF neighbors.
+          This object group conforms to RFC 1850."
+       ::= { ospfGroups 10 }
+
+  ospfVirtNbrGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfVirtNbrArea,
+          ospfVirtNbrRtrId,
+          ospfVirtNbrIpAddr,
+          ospfVirtNbrOptions,
+          ospfVirtNbrState,
+          ospfVirtNbrEvents,
+          ospfVirtNbrLsRetransQLen,
+          ospfVirtNbrHelloSuppressed
+          }
+       STATUS       deprecated
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF virtual
+          neighbors.  This object group conforms to RFC 1850."
+       ::= { ospfGroups 11 }
+
+  ospfExtLsdbGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfExtLsdbType,
+          ospfExtLsdbLsid,
+          ospfExtLsdbRouterId,
+          ospfExtLsdbSequence,
+          ospfExtLsdbAge,
+          ospfExtLsdbChecksum,
+          ospfExtLsdbAdvertisement
+          }
+       STATUS       deprecated
+       DESCRIPTION
+          "These objects are used for OSPF systems that display
+          their link state database.  This object group
+          conforms to RFC 1850.
+
+          This object group is replaced by the ospfAsLsdbGroup
+          in order to support any AS-scope LSA type in a single
+          table."
+       ::= { ospfGroups 12 }
+
+  ospfAreaAggregateGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfAreaAggregateAreaID,
+          ospfAreaAggregateLsdbType,
+          ospfAreaAggregateNet,
+          ospfAreaAggregateMask,
+          ospfAreaAggregateStatus,
+          ospfAreaAggregateEffect
+          }
+       STATUS       deprecated
+       DESCRIPTION
+          "These objects are used for OSPF systems to support
+          network prefix aggregation across areas."
+       ::= { ospfGroups 13 }
+
+  ospfLocalLsdbGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfLocalLsdbSequence,
+          ospfLocalLsdbAge,
+          ospfLocalLsdbChecksum,
+          ospfLocalLsdbAdvertisement
+          }
+       STATUS      current
+       DESCRIPTION
+          "These objects are used for OSPF systems
+          that display their link-local link state databases
+          for non-virtual links."
+        ::= { ospfGroups 14 }
+
+  ospfVirtLocalLsdbGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfVirtLocalLsdbSequence,
+          ospfVirtLocalLsdbAge,
+          ospfVirtLocalLsdbChecksum,
+          ospfVirtLocalLsdbAdvertisement
+          }
+        STATUS       current
+        DESCRIPTION
+           "These objects are used for OSPF systems
+           that display their link-local link state databases
+           for virtual links."
+         ::= { ospfGroups 15 }
+
+  ospfAsLsdbGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfAsLsdbSequence,
+          ospfAsLsdbAge,
+          ospfAsLsdbChecksum,
+          ospfAsLsdbAdvertisement
+          }
+        STATUS       current
+        DESCRIPTION
+           "These objects are used for OSPF systems
+           that display their AS-scope link state database."
+         ::= { ospfGroups 16 }
+
+  ospfBasicGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfRouterId,
+          ospfAdminStat,
+          ospfVersionNumber,
+          ospfAreaBdrRtrStatus,
+          ospfASBdrRtrStatus,
+          ospfExternLsaCount,
+          ospfExternLsaCksumSum,
+          ospfTOSSupport,
+          ospfOriginateNewLsas,
+          ospfRxNewLsas,
+          ospfExtLsdbLimit,
+          ospfMulticastExtensions,
+          ospfExitOverflowInterval,
+          ospfDemandExtensions,
+          ospfRFC1583Compatibility,
+          ospfOpaqueLsaSupport,
+          ospfReferenceBandwidth,
+          ospfRestartSupport,
+          ospfRestartInterval,
+          ospfRestartStrictLsaChecking,
+          ospfRestartStatus,
+          ospfRestartAge,
+          ospfRestartExitReason,
+          ospfAsLsaCount,
+          ospfAsLsaCksumSum,
+          ospfStubRouterSupport,
+          ospfStubRouterAdvertisement,
+          ospfDiscontinuityTime
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF global
+          parameters."
+       ::= { ospfGroups 17 }
+
+  ospfAreaGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfAreaId,
+          ospfImportAsExtern,
+          ospfSpfRuns,
+          ospfAreaBdrRtrCount,
+          ospfAsBdrRtrCount,
+          ospfAreaLsaCount,
+          ospfAreaLsaCksumSum,
+          ospfAreaSummary,
+          ospfAreaStatus,
+          ospfAreaNssaTranslatorRole,
+          ospfAreaNssaTranslatorState,
+          ospfAreaNssaTranslatorStabilityInterval,
+          ospfAreaNssaTranslatorEvents
+          }
+       STATUS       current
+       DESCRIPTION
+            "These objects are used by OSPF systems
+            to support areas."
+       ::= { ospfGroups 18 }
+
+  ospfIfGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfIfAreaId,
+          ospfIfType,
+          ospfIfAdminStat,
+          ospfIfRtrPriority,
+          ospfIfTransitDelay,
+          ospfIfRetransInterval,
+          ospfIfHelloInterval,
+          ospfIfRtrDeadInterval,
+          ospfIfPollInterval,
+          ospfIfState,
+          ospfIfDesignatedRouter,
+          ospfIfBackupDesignatedRouter,
+          ospfIfEvents,
+          ospfIfAuthType,
+          ospfIfAuthKey,
+          ospfIfStatus,
+          ospfIfMulticastForwarding,
+          ospfIfDemand,
+          ospfIfLsaCount,
+          ospfIfLsaCksumSum
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF interfaces."
+        ::= { ospfGroups 19 }
+
+  ospfVirtIfGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfVirtIfAreaId,
+          ospfVirtIfNeighbor,
+          ospfVirtIfTransitDelay,
+          ospfVirtIfRetransInterval,
+          ospfVirtIfHelloInterval,
+          ospfVirtIfRtrDeadInterval,
+          ospfVirtIfState,
+          ospfVirtIfEvents,
+          ospfVirtIfAuthType,
+          ospfVirtIfAuthKey,
+          ospfVirtIfStatus,
+          ospfVirtIfLsaCount,
+          ospfVirtIfLsaCksumSum,
+          ospfIfDesignatedRouterId,
+          ospfIfBackupDesignatedRouterId
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF
+          virtual interfaces."
+       ::= { ospfGroups 20 }
+
+  ospfNbrGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfNbrIpAddr,
+          ospfNbrAddressLessIndex,
+          ospfNbrRtrId,
+          ospfNbrOptions,
+          ospfNbrPriority,
+          ospfNbrState,
+          ospfNbrEvents,
+          ospfNbrLsRetransQLen,
+          ospfNbmaNbrStatus,
+          ospfNbmaNbrPermanence,
+          ospfNbrHelloSuppressed,
+          ospfNbrRestartHelperStatus,
+          ospfNbrRestartHelperAge,
+          ospfNbrRestartHelperExitReason
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF
+          neighbors."
+       ::= { ospfGroups 21 }
+
+  ospfVirtNbrGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfVirtNbrArea,
+          ospfVirtNbrRtrId,
+          ospfVirtNbrIpAddr,
+          ospfVirtNbrOptions,
+          ospfVirtNbrState,
+          ospfVirtNbrEvents,
+          ospfVirtNbrLsRetransQLen,
+          ospfVirtNbrHelloSuppressed,
+          ospfVirtNbrRestartHelperStatus,
+          ospfVirtNbrRestartHelperAge,
+          ospfVirtNbrRestartHelperExitReason
+
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used to monitor/manage OSPF
+          virtual neighbors."
+       ::= { ospfGroups 22 }
+
+  ospfAreaAggregateGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfAreaAggregateAreaID,
+          ospfAreaAggregateLsdbType,
+          ospfAreaAggregateNet,
+          ospfAreaAggregateMask,
+          ospfAreaAggregateStatus,
+          ospfAreaAggregateEffect,
+          ospfAreaAggregateExtRouteTag
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used for OSPF systems to support
+          network prefix aggregation across areas."
+       ::= { ospfGroups 23 }
+
+  ospfAreaLsaCountGroup      OBJECT-GROUP
+       OBJECTS {
+          ospfAreaLsaCountNumber
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used for OSPF systems that display
+          per-area, per-LSA-type counters."
+       ::= { ospfGroups 24 }
+
+  ospfHostGroup2    OBJECT-GROUP
+       OBJECTS {
+          ospfHostIpAddress,
+          ospfHostTOS,
+          ospfHostMetric,
+          ospfHostStatus,
+          ospfHostCfgAreaID
+          }
+       STATUS       current
+       DESCRIPTION
+          "These objects are used for OSPF systems
+          that support attached hosts."
+       ::= { ospfGroups 25 }
+
+--     This object group is included for SMI conformance.  It is not a
+
+--     mandatory group for compliance with this MIB
+
+  ospfObsoleteGroup    OBJECT-GROUP
+       OBJECTS {
+          ospfAuthType
+          }
+       STATUS       obsolete
+       DESCRIPTION
+          "These objects are obsolete and are no longer required for
+          OSPF systems.  They are placed into this group for SMI
+          conformance."
+       ::= { ospfGroups 26 }
+
+END
diff --git a/snmp_builder/mibs/OSPF-TRAP-MIB.mib b/snmp_builder/mibs/OSPF-TRAP-MIB.mib
new file mode 100644
index 0000000..2a8a3b4
--- /dev/null
+++ b/snmp_builder/mibs/OSPF-TRAP-MIB.mib
@@ -0,0 +1,584 @@
+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
+                 FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                 FROM SNMPv2-CONF
+    ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
+    ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
+    ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
+    ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId,
+    ospfVirtNbrState, ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId,
+    ospfLsdbAreaId, ospfExtLsdbLimit, ospf, ospfAreaId,
+    ospfAreaNssaTranslatorState, ospfRestartStatus,
+    ospfRestartInterval, ospfRestartExitReason,
+    ospfNbrRestartHelperStatus, ospfNbrRestartHelperAge,
+    ospfNbrRestartHelperExitReason, ospfVirtNbrRestartHelperStatus,
+    ospfVirtNbrRestartHelperAge, ospfVirtNbrRestartHelperExitReason
+                 FROM OSPF-MIB;
+
+  ospfTrap MODULE-IDENTITY
+
+       LAST-UPDATED "200611100000Z" -- November 10, 2006 00:00:00 EST
+       ORGANIZATION "IETF OSPF Working Group"
+       CONTACT-INFO
+       "WG E-Mail: ospf@ietf.org
+
+        WG Chairs: acee@cisco.com
+                   rohit@gmail.com
+
+        Editors:   Dan Joyal
+                   Nortel
+                   600 Technology Park Drive
+                   Billerica, MA  01821
+                   djoyal@nortel.com
+
+                   Piotr Galecki
+                   Airvana
+                   19 Alpha Road
+                   Chelmsford, MA 01824
+                   pgalecki@airvana.com
+
+                   Spencer Giacalone
+                   CSFB
+                   Eleven Madison Ave
+                   New York, NY 10010-3629
+
+                   spencer.giacalone@gmail.com"
+       DESCRIPTION
+          "The MIB module to describe traps for the OSPF
+          Version 2 Protocol.
+
+          Copyright (C) The IETF Trust (2006).
+          This version of this MIB module is part of
+          RFC 4750;  see the RFC itself for full legal
+          notices."
+
+       REVISION "200611100000Z" -- November 10, 2006 00:00:00 EST
+       DESCRIPTION
+          "Updated for latest changes to OSPFv2:
+           -added graceful restart related traps
+           -added new config error types
+           -added ospfNssaTranslatorStatusChange trap.
+           See Appendix B of RFC 4750 for more details.
+
+          This version published as part of RFC 4750"
+
+       REVISION "199501201225Z" -- Fri Jan 20 12:25:50 PST 1995
+       DESCRIPTION
+          "The initial SMIv2 revision of this MIB module, published
+          in RFC 1850."
+       ::= { ospf 16 }
+
+--  Trap Support Objects
+
+--  The following are support objects for the OSPF traps.
+
+  ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
+  ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
+
+  ospfSetTrap OBJECT-TYPE
+       SYNTAX       OCTET STRING (SIZE(4))
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "A 4-octet string serving as a bit map for
+          the trap events defined by the OSPF traps.  This
+          object is used to enable and disable specific
+          OSPF traps where a 1 in the bit field
+          represents enabled.  The right-most bit (least
+          significant) represents trap 0.
+
+          This object is persistent and when written
+
+          the entity SHOULD save the change to non-volatile
+          storage."
+        ::= { ospfTrapControl 1 }
+
+  ospfConfigErrorType OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       badVersion (1),
+                       areaMismatch (2),
+                       unknownNbmaNbr (3), -- Router is DR eligible
+                       unknownVirtualNbr (4),
+                       authTypeMismatch(5),
+                       authFailure (6),
+                       netMaskMismatch (7),
+                       helloIntervalMismatch (8),
+                       deadIntervalMismatch (9),
+                       optionMismatch (10),
+                       mtuMismatch (11),
+                       duplicateRouterId (12),
+                       noError (13) }
+       MAX-ACCESS   read-only
+       STATUS   current
+       DESCRIPTION
+          "Potential types of configuration conflicts.
+          Used by the ospfConfigError and
+          ospfConfigVirtError traps.  When the last value
+          of a trap using this object is needed, but no
+          traps of that type have been sent, this value
+          pertaining to this object should be returned as
+          noError."
+       ::= { ospfTrapControl 2 }
+
+  ospfPacketType OBJECT-TYPE
+       SYNTAX       INTEGER {
+                       hello (1),
+                       dbDescript (2),
+                       lsReq (3),
+                       lsUpdate (4),
+                       lsAck (5),
+                       nullPacket (6) }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "OSPF packet types.  When the last value of a trap
+          using this object is needed, but no traps of
+          that type have been sent, this value pertaining
+          to this object should be returned as nullPacket."
+       ::= { ospfTrapControl 3 }
+
+  ospfPacketSrc OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "The IP address of an inbound packet that cannot
+          be identified by a neighbor instance.  When
+          the last value of a trap using this object is
+          needed, but no traps of that type have been sent,
+          this value pertaining to this object should
+          be returned as 0.0.0.0."
+       ::= { ospfTrapControl 4 }
+
+--  Traps
+
+  ospfVirtIfStateChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfVirtIfAreaId,
+          ospfVirtIfNeighbor,
+          ospfVirtIfState  -- The new state
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtIfStateChange trap signifies that there
+          has been a change in the state of an OSPF virtual
+          interface.
+
+          This trap should be generated when the interface
+          state regresses (e.g., goes from Point-to-Point to Down)
+          or progresses to a terminal state
+          (i.e., Point-to-Point)."
+       ::= { ospfTraps 1 }
+
+  ospfNbrStateChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfNbrIpAddr,
+          ospfNbrAddressLessIndex,
+          ospfNbrRtrId,
+          ospfNbrState  -- The new state
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfNbrStateChange trap signifies that
+          there has been a change in the state of a
+          non-virtual OSPF neighbor.  This trap should be
+          generated when the neighbor state regresses
+          (e.g., goes from Attempt or Full to 1-Way or
+          Down) or progresses to a terminal state (e.g.,
+          2-Way or Full).  When an neighbor transitions
+          from or to Full on non-broadcast multi-access
+          and broadcast networks, the trap should be
+          generated by the designated router.  A designated
+          router transitioning to Down will be noted by
+          ospfIfStateChange."
+       ::= { ospfTraps 2 }
+
+  ospfVirtNbrStateChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfVirtNbrArea,
+          ospfVirtNbrRtrId,
+          ospfVirtNbrState  -- The new state
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtNbrStateChange trap signifies that there
+          has been a change in the state of an OSPF virtual
+          neighbor.  This trap should be generated
+          when the neighbor state regresses (e.g., goes
+          from Attempt or Full to 1-Way or Down) or
+          progresses to a terminal state (e.g., Full)."
+       ::= { ospfTraps 3 }
+
+  ospfIfConfigError NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfPacketSrc,  -- The source IP address
+          ospfConfigErrorType, -- Type of error
+          ospfPacketType
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfIfConfigError trap signifies that a
+          packet has been received on a non-virtual
+          interface from a router whose configuration
+          parameters conflict with this router's
+          configuration parameters.  Note that the event
+          optionMismatch should cause a trap only if it
+          prevents an adjacency from forming."
+       ::= { ospfTraps 4 }
+
+  ospfVirtIfConfigError NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfVirtIfAreaId,
+          ospfVirtIfNeighbor,
+          ospfConfigErrorType, -- Type of error
+
+          ospfPacketType
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtIfConfigError trap signifies that a
+          packet has been received on a virtual interface
+          from a router whose configuration parameters
+          conflict with this router's configuration
+          parameters.  Note that the event optionMismatch
+          should cause a trap only if it prevents an
+          adjacency from forming."
+       ::= { ospfTraps 5 }
+
+  ospfIfAuthFailure NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfPacketSrc,  -- The source IP address
+          ospfConfigErrorType, -- authTypeMismatch or
+                               -- authFailure
+          ospfPacketType
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfIfAuthFailure trap signifies that a
+          packet has been received on a non-virtual
+          interface from a router whose authentication key
+          or authentication type conflicts with this
+          router's authentication key or authentication
+          type."
+       ::= { ospfTraps 6 }
+
+  ospfVirtIfAuthFailure NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfVirtIfAreaId,
+          ospfVirtIfNeighbor,
+          ospfConfigErrorType, -- authTypeMismatch or
+                               -- authFailure
+          ospfPacketType
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtIfAuthFailure trap signifies that a
+          packet has been received on a virtual interface
+          from a router whose authentication key or
+          authentication type conflicts with this router's
+          authentication key or authentication type."
+       ::= { ospfTraps 7 }
+
+  ospfIfRxBadPacket NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfPacketSrc,  -- The source IP address
+          ospfPacketType
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfIfRxBadPacket trap signifies that an
+          OSPF packet has been received on a non-virtual
+          interface that cannot be parsed."
+       ::= { ospfTraps 8 }
+
+  ospfVirtIfRxBadPacket NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+         ospfVirtIfAreaId,
+         ospfVirtIfNeighbor,
+         ospfPacketType
+         }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtIfRxBadPacket trap signifies that an OSPF
+          packet has been received on a virtual interface
+          that cannot be parsed."
+       ::= { ospfTraps 9 }
+
+  ospfTxRetransmit NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfNbrRtrId, -- Destination
+          ospfPacketType,
+          ospfLsdbType,
+          ospfLsdbLsid,
+          ospfLsdbRouterId
+          }
+        STATUS       current
+        DESCRIPTION
+           "An ospfTxRetransmit trap signifies than an
+           OSPF packet has been retransmitted on a
+           non-virtual interface.  All packets that may be
+           retransmitted are associated with an LSDB entry.
+           The LS type, LS ID, and Router ID are used to
+           identify the LSDB entry."
+        ::= { ospfTraps 10 }
+
+  ospfVirtIfTxRetransmit NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfVirtIfAreaId,
+          ospfVirtIfNeighbor,
+          ospfPacketType,
+          ospfLsdbType,
+          ospfLsdbLsid,
+          ospfLsdbRouterId
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtIfTxRetransmit trap signifies than an
+          OSPF packet has been retransmitted on a virtual
+          interface.  All packets that may be retransmitted
+          are associated with an LSDB entry.  The LS
+          type, LS ID, and Router ID are used to identify
+          the LSDB entry."
+       ::= { ospfTraps 11 }
+
+  ospfOriginateLsa NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
+          ospfLsdbType,
+          ospfLsdbLsid,
+          ospfLsdbRouterId
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfOriginateLsa trap signifies that a new
+          LSA has been originated by this router.  This
+          trap should not be invoked for simple refreshes
+          of LSAs (which happens every 30 minutes), but
+          instead will only be invoked when an LSA is
+          (re)originated due to a topology change.
+          Additionally, this trap does not include LSAs that
+          are being flushed because they have reached
+          MaxAge."
+       ::= { ospfTraps 12 }
+
+  ospfMaxAgeLsa NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
+          ospfLsdbType,
+          ospfLsdbLsid,
+          ospfLsdbRouterId
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfMaxAgeLsa trap signifies that one of
+          the LSAs in the router's link state database has
+          aged to MaxAge."
+       ::= { ospfTraps 13 }
+
+  ospfLsdbOverflow NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfExtLsdbLimit
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfLsdbOverflow trap signifies that the
+          number of LSAs in the router's link state
+          database has exceeded ospfExtLsdbLimit."
+       ::= { ospfTraps 14 }
+
+  ospfLsdbApproachingOverflow NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfExtLsdbLimit
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfLsdbApproachingOverflow trap signifies
+          that the number of LSAs in the router's
+          link state database has exceeded ninety percent of
+          ospfExtLsdbLimit."
+       ::= { ospfTraps 15 }
+
+  ospfIfStateChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+          ospfIfIpAddress,
+          ospfAddressLessIf,
+          ospfIfState   -- The new state
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfIfStateChange trap signifies that there
+          has been a change in the state of a non-virtual
+          OSPF interface.  This trap should be generated
+          when the interface state regresses (e.g., goes
+          from Dr to Down) or progresses to a terminal
+          state (i.e., Point-to-Point, DR Other, Dr, or
+          Backup)."
+       ::= { ospfTraps 16 }
+
+  ospfNssaTranslatorStatusChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+
+          ospfAreaId,
+          ospfAreaNssaTranslatorState -- The current translation
+                                      -- status
+          }
+       STATUS       current
+       DESCRIPTION
+          "An ospfNssaTranslatorStatusChange trap indicates that
+          there has been a change in the router's ability to
+          translate OSPF type-7 LSAs into OSPF type-5 LSAs.
+          This trap should be generated when the translator
+          status transitions from or to any defined status on
+          a per-area basis."
+       ::= { ospfTraps 17 }
+
+  ospfRestartStatusChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+                 ospfRestartStatus,
+                 ospfRestartInterval,
+                 ospfRestartExitReason
+               }
+       STATUS       current
+       DESCRIPTION
+          "An ospfRestartStatusChange trap signifies that
+          there has been a change in the graceful restart
+          state for the router.  This trap should be
+          generated when the router restart status
+          changes."
+       ::= { ospfTraps 18 }
+
+  ospfNbrRestartHelperStatusChange NOTIFICATION-TYPE
+       OBJECTS { ospfRouterId, -- The originator of the trap
+                 ospfNbrIpAddr,
+                 ospfNbrAddressLessIndex,
+                 ospfNbrRtrId,
+                 ospfNbrRestartHelperStatus,
+                 ospfNbrRestartHelperAge,
+                 ospfNbrRestartHelperExitReason
+               }
+       STATUS       current
+       DESCRIPTION
+          "An ospfNbrRestartHelperStatusChange trap signifies that
+          there has been a change in the graceful restart
+          helper state for the neighbor.  This trap should be
+          generated when the neighbor restart helper status
+          transitions for a neighbor."
+       ::= { ospfTraps 19 }
+
+  ospfVirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
+
+       OBJECTS { ospfRouterId, -- The originator of the trap
+                 ospfVirtNbrArea,
+                 ospfVirtNbrRtrId,
+                 ospfVirtNbrRestartHelperStatus,
+                 ospfVirtNbrRestartHelperAge,
+                 ospfVirtNbrRestartHelperExitReason
+               }
+       STATUS       current
+       DESCRIPTION
+          "An ospfVirtNbrRestartHelperStatusChange trap signifies
+          that there has been a change in the graceful restart
+          helper state for the virtual neighbor.  This trap should
+          be generated when the virtual neighbor restart helper
+          status transitions for a virtual neighbor."
+       ::= { ospfTraps 20 }
+
+--  conformance information
+
+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
+ospfTrapGroups      OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
+
+--  compliance statements
+
+ospfTrapCompliance MODULE-COMPLIANCE
+     STATUS       obsolete
+     DESCRIPTION
+        "The compliance statement."
+     MODULE       -- this module
+     MANDATORY-GROUPS { ospfTrapControlGroup }
+
+     GROUP       ospfTrapControlGroup
+     DESCRIPTION
+        "This group is optional but recommended for all
+        OSPF systems."
+     ::= { ospfTrapCompliances 1 }
+
+ospfTrapCompliance2 MODULE-COMPLIANCE
+     STATUS       current
+     DESCRIPTION
+        "The compliance statement."
+     MODULE       -- this module
+     MANDATORY-GROUPS { ospfTrapControlGroup, ospfTrapEventGroup }
+     OBJECT       ospfConfigErrorType
+     MIN-ACCESS   accessible-for-notify
+     DESCRIPTION
+        "This object is only required to be supplied within
+        notifications."
+
+     OBJECT       ospfPacketType
+     MIN-ACCESS   accessible-for-notify
+     DESCRIPTION
+        "This object is only required to be supplied within
+        notifications."
+     OBJECT       ospfPacketSrc
+     MIN-ACCESS   accessible-for-notify
+     DESCRIPTION
+        "This object is only required to be supplied within
+        notifications."
+     ::= { ospfTrapCompliances 2 }
+
+--  units of conformance
+
+  ospfTrapControlGroup    OBJECT-GROUP
+       OBJECTS { ospfSetTrap,
+                 ospfConfigErrorType,
+                 ospfPacketType,
+                 ospfPacketSrc }
+       STATUS       current
+       DESCRIPTION
+          "These objects are required to control traps
+          from OSPF systems."
+       ::= { ospfTrapGroups 1 }
+
+  ospfTrapEventGroup       NOTIFICATION-GROUP
+       NOTIFICATIONS {
+          ospfVirtIfStateChange,
+          ospfNbrStateChange,
+          ospfVirtNbrStateChange,
+          ospfIfConfigError,
+          ospfVirtIfConfigError,
+          ospfIfAuthFailure,
+          ospfVirtIfAuthFailure,
+          ospfIfRxBadPacket,
+          ospfVirtIfRxBadPacket,
+          ospfTxRetransmit,
+          ospfVirtIfTxRetransmit,
+          ospfOriginateLsa,
+          ospfMaxAgeLsa,
+          ospfLsdbOverflow,
+          ospfLsdbApproachingOverflow,
+          ospfIfStateChange,
+          ospfNssaTranslatorStatusChange,
+          ospfRestartStatusChange,
+          ospfNbrRestartHelperStatusChange,
+          ospfVirtNbrRestartHelperStatusChange
+          }
+       STATUS        current
+       DESCRIPTION
+          "A grouping of OSPF trap events, as specified
+          in NOTIFICATION-TYPE constructs."
+       ::= { ospfTrapGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/OSPFV3-MIB.mib b/snmp_builder/mibs/OSPFV3-MIB.mib
new file mode 100644
index 0000000..258f533
--- /dev/null
+++ b/snmp_builder/mibs/OSPFV3-MIB.mib
@@ -0,0 +1,3951 @@
+ OSPFV3-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+         MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
+         Counter32, Gauge32, Integer32, Unsigned32
+                 FROM SNMPv2-SMI
+         TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp
+                 FROM SNMPv2-TC
+         MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                 FROM SNMPv2-CONF
+         InterfaceIndex
+                 FROM IF-MIB
+         InetAddressType, InetAddress, InetAddressPrefixLength,
+         InetAddressIPv6
+                 FROM INET-ADDRESS-MIB
+         Metric, BigMetric, Status,
+         HelloRange, DesignatedRouterPriority
+                 FROM OSPF-MIB;
+
+ ospfv3MIB MODULE-IDENTITY
+         LAST-UPDATED "200908130000Z"
+         ORGANIZATION "IETF OSPF Working Group"
+         CONTACT-INFO
+             "WG E-Mail: ospf@ietf.org
+              WG Chairs: Acee Lindem
+                         acee@redback.com
+
+                         Abhay Roy
+                         akr@cisco.com
+
+              Editors:   Dan Joyal
+                         Nortel
+                         600 Technology Park Drive
+                         Billerica, MA  01821, USA
+                         djoyal@nortel.com
+
+                         Vishwas Manral
+                         IP Infusion
+                         Almora, Uttarakhand
+                         India
+                         vishwas@ipinfusion.com"
+          DESCRIPTION
+             "The MIB module for OSPF version 3.
+
+              Copyright (c) 2009 IETF Trust and the persons
+              identified as authors of the code.  All rights
+              reserved.
+
+              Redistribution and use in source and binary forms, with
+              or without modification, are permitted provided that
+              the following conditions are met:
+
+              - Redistributions of source code must retain the above
+                copyright notice, this list of conditions and the
+                following disclaimer.
+
+             - Redistributions in binary form must reproduce the
+               above copyright notice, this list of conditions and
+               the following disclaimer in the documentation and/or
+               other materials provided with the distribution.
+
+             - Neither the name of Internet Society, IETF or IETF
+               Trust, nor the names of specific contributors, may be
+               used to endorse or promote products derived from this
+               software without specific prior written permission.
+
+               THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+               CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
+               WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+               WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+               PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
+               THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
+               DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+               CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+               PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+               USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+               HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+               IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+               NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+               USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+               POSSIBILITY OF SUCH DAMAGE.
+
+               This version of this MIB module is part of RFC 5643;
+               see the RFC itself for full legal notices."
+
+          REVISION "200908130000Z"
+          DESCRIPTION
+              "Initial version, published as RFC 5643"
+          ::= { mib-2 191 }
+
+ -- Textual conventions
+
+ Ospfv3UpToRefreshIntervalTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS        current
+          DESCRIPTION
+               "The values one might be able to configure for
+               variables bounded by the Refresh Interval."
+          REFERENCE
+               "OSPF Version 2, Appendix B, Architectural Constants"
+          SYNTAX      Unsigned32 (1..1800)
+
+ Ospfv3DeadIntervalRangeTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS        current
+          DESCRIPTION
+               "The range, in seconds, of dead interval value."
+          REFERENCE
+               "OSPF for IPv6, Appendix C.3, Router Interface
+               Parameters"
+          SYNTAX      Unsigned32 (1..'FFFF'h)
+
+ Ospfv3RouterIdTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+               "A 32-bit, unsigned integer uniquely identifying the
+               router in the Autonomous System.  To ensure
+               uniqueness, this may default to the value of one of
+               the router's IPv4 host addresses if IPv4 is
+               configured on the router."
+          REFERENCE
+               "OSPF for IPv6, Appendix C.1, Global Parameters"
+          SYNTAX      Unsigned32 (1..'FFFFFFFF'h)
+
+ Ospfv3LsIdTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+               "A unique 32-bit identifier of the piece of the
+               routing domain that is being described by a link
+               state advertisement.  In contrast to OSPFv2, the
+               Link State ID (LSID) has no addressing semantics."
+          REFERENCE
+               "OSPF Version 2, Section 12.1.4, Link State ID"
+          SYNTAX      Unsigned32 (1..'FFFFFFFF'h)
+
+ Ospfv3AreaIdTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+               "An OSPFv3 Area Identifier.  A value of zero
+               identifies the backbone area."
+          REFERENCE
+               "OSPF for IPv6, Appendix C.3 Router Interface
+               Parameters"
+          SYNTAX      Unsigned32 (0..'FFFFFFFF'h)
+
+ Ospfv3IfInstIdTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+               "An OSPFv3 Interface Instance ID."
+          REFERENCE
+               "OSPF for IPv6, Appendix C.3, Router Interface
+               Parameters"
+          SYNTAX      Unsigned32 (0..255)
+
+ Ospfv3LsaSequenceTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+             "The sequence number field is a signed 32-bit
+             integer.  It is used to detect old and duplicate
+             link state advertisements.  The space of
+             sequence numbers is linearly ordered.  The
+             larger the sequence number, the more recent the
+             advertisement."
+          REFERENCE
+             "OSPF Version 2, Section 12.1.6, LS sequence
+             number"
+          SYNTAX      Integer32
+
+ Ospfv3LsaAgeTC ::= TEXTUAL-CONVENTION
+          DISPLAY-HINT "d"
+          STATUS      current
+          DESCRIPTION
+             "The age of the link state advertisement in
+             seconds.  The high-order bit of the LS age
+             field is considered the DoNotAge bit for
+             support of on-demand circuits."
+          REFERENCE
+             "OSPF Version 2, Section 12.1.1, LS age;
+              Extending OSPF to Support Demand Circuits,
+              Section 2.2, The LS age field"
+          SYNTAX      Unsigned32 (0..3600 | 32768..36368)
+
+ -- Top-level structure of MIB
+ ospfv3Notifications  OBJECT IDENTIFIER ::= { ospfv3MIB 0 }
+ ospfv3Objects        OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
+ ospfv3Conformance    OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
+
+ -- OSPFv3 General Variables
+
+ -- These parameters apply globally to the Router's
+ -- OSPFv3 Process.
+
+ ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
+
+ ospfv3RouterId OBJECT-TYPE
+         SYNTAX         Ospfv3RouterIdTC
+         MAX-ACCESS     read-write
+         STATUS         current
+         DESCRIPTION
+             "A 32-bit unsigned integer uniquely identifying
+             the router in the Autonomous System.  To ensure
+             uniqueness, this may default to the 32-bit
+             unsigned integer representation of one of
+             the router's IPv4 interface addresses (if IPv4
+             is configured on the router).
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+         REFERENCE
+               "OSPF for IPv6, Appendix C.1, Global Parameters"
+         ::= { ospfv3GeneralGroup 1 }
+
+ ospfv3AdminStatus OBJECT-TYPE
+         SYNTAX          Status
+         MAX-ACCESS      read-write
+         STATUS          current
+         DESCRIPTION
+             "The administrative status of OSPFv3 in the
+             router.  The value 'enabled' denotes that the
+             OSPFv3 Process is active on at least one
+             interface; 'disabled' disables it on all
+             interfaces.
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+         ::= { ospfv3GeneralGroup 2 }
+
+ ospfv3VersionNumber OBJECT-TYPE
+         SYNTAX          INTEGER { version3 (3) }
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The version number of OSPF for IPv6 is 3."
+         ::= { ospfv3GeneralGroup 3 }
+
+ ospfv3AreaBdrRtrStatus OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "A flag to denote whether this router is an area
+             border router.  The value of this object is true (1)
+             when the router is an area border router."
+         REFERENCE
+             "OSPF Version 2, Section 3, Splitting the AS into
+             Areas"
+         ::= { ospfv3GeneralGroup 4 }
+
+ ospfv3ASBdrRtrStatus OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-write
+         STATUS          current
+         DESCRIPTION
+             "A flag to note whether this router is
+             configured as an Autonomous System border router.
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+         REFERENCE
+             "OSPF Version 2, Section 3.3, Classification of
+             routers"
+         ::= { ospfv3GeneralGroup 5 }
+
+ ospfv3AsScopeLsaCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of AS-scope (e.g., AS-External) link state
+             advertisements in the link state database."
+         ::= { ospfv3GeneralGroup 6 }
+
+ ospfv3AsScopeLsaCksumSum OBJECT-TYPE
+         SYNTAX          Unsigned32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit unsigned sum of the LS checksums of
+             the AS-scoped link state advertisements
+             contained in the link state database.  This sum
+             can be used to determine if there has been a
+             change in a router's link state database or
+             to compare the link state database of two
+             routers."
+         ::= { ospfv3GeneralGroup 7 }
+
+ ospfv3OriginateNewLsas OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of new link state advertisements
+             that have been originated.  This number is
+             incremented each time the router originates a new
+             LSA.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3GeneralGroup 8 }
+
+ ospfv3RxNewLsas OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of link state advertisements
+             received that are determined to be new
+             instantiations.  This number does not include
+             newer instantiations of self-originated link state
+             advertisements.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3GeneralGroup 9 }
+
+ ospfv3ExtLsaCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+              "The number of External (LS type 0x4005) in the
+              link state database."
+         ::= { ospfv3GeneralGroup 10 }
+
+ ospfv3ExtAreaLsdbLimit OBJECT-TYPE
+         SYNTAX          Integer32 (-1..'7FFFFFFF'h)
+         MAX-ACCESS      read-write
+         STATUS          current
+         DESCRIPTION
+             "The maximum number of non-default
+             AS-external-LSA entries that can be stored in the
+             link state database.  If the value is -1, then
+             there is no limit.
+
+             When the number of non-default AS-external-LSAs
+             in a router's link state database reaches
+             ospfv3ExtAreaLsdbLimit, the router enters Overflow
+             state.  The router never holds more than
+             ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
+             in its database.  ospfv3ExtAreaLsdbLimit MUST be set
+             identically in all routers attached to the OSPFv3
+             backbone and/or any regular OSPFv3 area (i.e.,
+             OSPFv3 stub areas and not-so-stubby-areas (NSSAs)
+             are excluded).
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+         ::= { ospfv3GeneralGroup 11 }
+
+ ospfv3ExitOverflowInterval OBJECT-TYPE
+         SYNTAX          Unsigned32
+         UNITS           "seconds"
+         MAX-ACCESS      read-write
+         STATUS          current
+         DESCRIPTION
+             "The number of seconds that, after entering
+             Overflow state, a router will attempt to leave
+             Overflow state.  This allows the router to again
+             originate non-default, AS-External-LSAs.  When
+             set to 0, the router will not leave Overflow
+             state until restarted.
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+         ::= { ospfv3GeneralGroup 12 }
+
+ ospfv3DemandExtensions OBJECT-TYPE
+         SYNTAX         TruthValue
+         MAX-ACCESS     read-write
+         STATUS         current
+         DESCRIPTION
+             "The router's support for demand circuits.
+             The value of this object is true (1) when
+             demand circuits are supported.
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+         REFERENCE
+             "OSPF Version 2; Extending OSPF to Support Demand
+             Circuits"
+         ::= { ospfv3GeneralGroup 13 }
+
+ ospfv3ReferenceBandwidth OBJECT-TYPE
+        SYNTAX       Unsigned32
+        UNITS        "kilobits per second"
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "Reference bandwidth in kilobits per second for
+            calculating default interface metrics.  The
+            default value is 100,000 KBPS (100 MBPS).
+
+            This object is persistent, and when written, the
+            entity SHOULD save the change to non-volatile
+            storage."
+        REFERENCE
+            "OSPF Version 2, Appendix C.3, Router interface
+            parameters"
+        DEFVAL { 100000 }
+     ::= { ospfv3GeneralGroup 14 }
+
+ ospfv3RestartSupport OBJECT-TYPE
+        SYNTAX       INTEGER { none(1),
+                               plannedOnly(2),
+                               plannedAndUnplanned(3)
+                          }
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "The router's support for OSPF graceful restart.
+            Options include no restart support, only planned
+
+            restarts, or both planned and unplanned restarts.
+
+            This object is persistent, and when written, the
+            entity SHOULD save the change to non-volatile
+            storage."
+        REFERENCE "Graceful OSPF Restart, Appendix B.1, Global
+                     Parameters (Minimum subset)"
+        ::= { ospfv3GeneralGroup 15 }
+
+ ospfv3RestartInterval OBJECT-TYPE
+        SYNTAX       Ospfv3UpToRefreshIntervalTC
+        UNITS        "seconds"
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "Configured OSPF graceful restart timeout interval.
+
+            This object is persistent, and when written, the
+            entity SHOULD save the change to non-volatile
+            storage."
+        REFERENCE "Graceful OSPF Restart, Appendix B.1, Global
+                  Parameters (Minimum subset)"
+        DEFVAL { 120 }
+        ::= { ospfv3GeneralGroup 16 }
+
+ ospfv3RestartStrictLsaChecking OBJECT-TYPE
+       SYNTAX       TruthValue
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+          "Indicates if strict LSA checking is enabled for
+          graceful restart.  A value of true (1) indicates that
+          strict LSA checking is enabled.
+
+          This object is persistent, and when written,
+          the entity SHOULD save the change to non-volatile
+          storage."
+       REFERENCE "Graceful OSPF Restart, Appendix B.2, Global
+                 Parameters (Optional)"
+       DEFVAL { true }
+       ::= { ospfv3GeneralGroup 17 }
+
+ ospfv3RestartStatus OBJECT-TYPE
+        SYNTAX       INTEGER { notRestarting(1),
+                               plannedRestart(2),
+                               unplannedRestart(3)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "The current status of OSPF graceful restart capability."
+        ::= { ospfv3GeneralGroup 18 }
+
+ ospfv3RestartAge OBJECT-TYPE
+        SYNTAX       Ospfv3UpToRefreshIntervalTC
+        UNITS        "seconds"
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "Remaining time in the current OSPF graceful restart
+           interval."
+        ::= { ospfv3GeneralGroup 19 }
+
+ ospfv3RestartExitReason OBJECT-TYPE
+        SYNTAX       INTEGER { none(1),
+                               inProgress(2),
+                               completed(3),
+                               timedOut(4),
+                               topologyChanged(5)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "Describes the outcome of the last attempt at a
+           graceful restart.
+
+           none:            no restart has yet been attempted.
+           inProgress:      a restart attempt is currently underway.
+           completed:       the last restart completed successfully.
+           timedOut:        the last restart timed out.
+           topologyChanged: the last restart was aborted due to
+                            a topology change."
+     ::= { ospfv3GeneralGroup 20 }
+
+ ospfv3NotificationEnable OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "This object provides a coarse level of control
+             over the generation of OSPFv3 notifications.
+
+             If this object is set to true (1), then it enables
+             the generation of OSPFv3 notifications.  If it is
+             set to false (2), these notifications are not
+             generated.
+
+             This object is persistent, and when written, the
+             entity SHOULD save the change to non-volatile
+             storage."
+    ::= { ospfv3GeneralGroup 21 }
+
+ospfv3StubRouterSupport OBJECT-TYPE
+     SYNTAX       TruthValue
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The router's support for stub router functionality.  An
+         object value of true (1) indicates that stub router
+         functionality is supported."
+     REFERENCE
+         "OSPF Stub Router Advertisement"
+     ::= { ospfv3GeneralGroup 22 }
+
+ ospfv3StubRouterAdvertisement OBJECT-TYPE
+     SYNTAX       INTEGER {
+                        doNotAdvertise(1),
+                        advertise(2)
+                        }
+     MAX-ACCESS   read-write
+     STATUS       current
+     DESCRIPTION
+         "This object controls the advertisement of
+         stub LSAs by the router.  The value
+         doNotAdvertise (1) will result in the advertisement
+         of standard LSAs and is the default value.
+
+         This object is persistent, and when written,
+         the entity SHOULD save the change to non-volatile
+         storage."
+     REFERENCE
+         "OSPF Stub Router Advertisement, Section 2, Proposed
+         Solution"
+     DEFVAL { doNotAdvertise }
+     ::= { ospfv3GeneralGroup 23 }
+
+ospfv3DiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The value of sysUpTime on the most recent occasion
+        at which any one of this MIB's counters suffered
+        a discontinuity.
+
+        If no such discontinuities have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+    ::= { ospfv3GeneralGroup 24 }
+
+  ospfv3RestartTime OBJECT-TYPE
+      SYNTAX     TimeStamp
+      MAX-ACCESS read-only
+      STATUS     current
+      DESCRIPTION
+         "The value of sysUpTime on the most recent occasion
+          at which the ospfv3RestartExitReason was updated."
+      ::= { ospfv3GeneralGroup 25 }
+
+ -- The OSPFv3 Area Data Structure contains information
+ -- regarding the various areas.  The interfaces and
+ -- virtual links are configured as part of these areas.
+ -- Area 0, by definition, is the backbone area.
+
+ ospfv3AreaTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3AreaEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Information describing the configured
+             parameters and cumulative statistics of the router's
+             attached areas.  The interfaces and
+             virtual links are configured as part of these areas.
+             Area 0, by definition, is the backbone area."
+         REFERENCE
+             "OSPF Version 2, Section 6, The Area Data
+             Structure"
+         ::= { ospfv3Objects 2 }
+
+ ospfv3AreaEntry OBJECT-TYPE
+         SYNTAX          Ospfv3AreaEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Information describing the configured
+             parameters and cumulative statistics of one of the
+             router's attached areas.
+
+             The information in this table is persistent,
+             and when written, the entity SHOULD save the a
+             change to non-volatile storage."
+         INDEX           { ospfv3AreaId }
+         ::= { ospfv3AreaTable 1 }
+
+ Ospfv3AreaEntry ::= SEQUENCE {
+         ospfv3AreaId
+                 Ospfv3AreaIdTC,
+         ospfv3AreaImportAsExtern
+                 INTEGER,
+         ospfv3AreaSpfRuns
+                 Counter32,
+         ospfv3AreaBdrRtrCount
+                 Gauge32,
+         ospfv3AreaAsBdrRtrCount
+                 Gauge32,
+         ospfv3AreaScopeLsaCount
+                 Gauge32,
+         ospfv3AreaScopeLsaCksumSum
+                 Unsigned32,
+         ospfv3AreaSummary
+                 INTEGER,
+         ospfv3AreaRowStatus
+                 RowStatus,
+         ospfv3AreaStubMetric
+                 BigMetric,
+         ospfv3AreaNssaTranslatorRole
+                 INTEGER,
+         ospfv3AreaNssaTranslatorState
+                 INTEGER,
+         ospfv3AreaNssaTranslatorStabInterval
+                 Unsigned32,
+         ospfv3AreaNssaTranslatorEvents
+                 Counter32,
+         ospfv3AreaStubMetricType
+                 INTEGER,
+         ospfv3AreaTEEnabled
+                 TruthValue
+         }
+
+ ospfv3AreaId OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A 32-bit unsigned integer uniquely identifying an area.
+             Area ID 0 is used for the OSPFv3 backbone."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         ::= { ospfv3AreaEntry 1 }
+
+ ospfv3AreaImportAsExtern OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         importExternal(1),   -- normal area
+                         importNoExternal(2), -- stub area
+                         importNssa(3)        -- not-so-stubby-area
+                         }
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "Indicates whether an area is a stub area, NSSA, or
+             standard area.  AS-scope LSAs are not imported into stub
+             areas or NSSAs.  NSSAs import AS-External data as NSSA
+             LSAs that have Area-scope."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         DEFVAL { importExternal }
+         ::= { ospfv3AreaEntry 2 }
+
+ ospfv3AreaSpfRuns OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of times that the intra-area route
+             table has been calculated using this area's
+             link state database.  This is typically done
+             using Dijkstra's algorithm.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3AreaEntry 3 }
+
+ ospfv3AreaBdrRtrCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The total number of area border routers
+             reachable within this area.  This is initially zero,
+             and is calculated in each Shortest Path First (SPF)
+             pass."
+         DEFVAL { 0 }
+         ::= { ospfv3AreaEntry 4 }
+
+ ospfv3AreaAsBdrRtrCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The total number of Autonomous System border
+             routers reachable within this area.  This is
+             initially zero, and is calculated in each SPF
+             pass."
+         DEFVAL { 0 }
+         ::= { ospfv3AreaEntry 5 }
+
+ ospfv3AreaScopeLsaCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The total number of Area-scope link state
+             advertisements in this area's link state
+             database."
+          DEFVAL { 0 }
+         ::= { ospfv3AreaEntry 6 }
+
+ ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
+         SYNTAX          Unsigned32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit unsigned sum of the Area-scope link state
+             advertisements' LS checksums contained in this
+             area's link state database.  The sum can be used
+             to determine if there has been a change in a
+             router's link state database or to compare the
+             link state database of two routers."
+         ::= { ospfv3AreaEntry 7 }
+
+ ospfv3AreaSummary OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         noAreaSummary(1),
+                         sendAreaSummary(2)
+                         }
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The variable ospfv3AreaSummary controls the
+             import of Inter-Area LSAs into stub and
+             NSSA areas.  It has no effect on other areas.
+
+             If it is noAreaSummary, the router will neither
+             originate nor propagate Inter-Area LSAs into the
+             stub or NSSA area.  It will only advertise a
+             default route.
+
+             If it is sendAreaSummary, the router will both
+             summarize and propagate Inter-Area LSAs."
+         DEFVAL   { sendAreaSummary }
+         ::= { ospfv3AreaEntry 8 }
+
+ ospfv3AreaRowStatus OBJECT-TYPE
+         SYNTAX          RowStatus
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This object permits management of the table by
+             facilitating actions such as row creation,
+             construction, and destruction.
+
+             The value of this object has no effect on
+             whether other objects in this conceptual row can be
+             modified."
+         ::= { ospfv3AreaEntry 9 }
+
+ ospfv3AreaStubMetric OBJECT-TYPE
+         SYNTAX          BigMetric
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The metric value advertised for the default route
+             into stub and NSSA areas.  By default, this equals the
+             least metric among the interfaces to other areas."
+         ::= { ospfv3AreaEntry 10 }
+
+ ospfv3AreaNssaTranslatorRole OBJECT-TYPE
+         SYNTAX          INTEGER { always(1), candidate(2) }
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "Indicates an NSSA border router's policy to
+             perform NSSA translation of NSSA-LSAs into
+             AS-External-LSAs."
+         DEFVAL { candidate }
+         ::= { ospfv3AreaEntry 11 }
+
+ ospfv3AreaNssaTranslatorState OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         enabled(1),
+                         elected(2),
+                         disabled(3)
+                         }
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+              "Indicates if and how an NSSA border router is
+              performing NSSA translation of NSSA-LSAs into
+              AS-External-LSAs.  When this object is set to
+              'enabled', the NSSA border router's
+              ospfv3AreaNssaTranslatorRole has been set to 'always'.
+              When this object is set to 'elected', a candidate
+              NSSA border router is translating NSSA-LSAs into
+              AS-External-LSAs.  When this object is set to
+              'disabled', a candidate NSSA Border router is NOT
+              translating NSSA-LSAs into AS-External-LSAs."
+         ::= { ospfv3AreaEntry 12 }
+
+ ospfv3AreaNssaTranslatorStabInterval OBJECT-TYPE
+         SYNTAX          Unsigned32
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The stability interval defined as the number of
+             seconds after an elected translator determines its
+             services are no longer required that it should
+             continue to perform its translation duties."
+         DEFVAL { 40 }
+         ::= { ospfv3AreaEntry 13 }
+
+ ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "Indicates the number of Translator state changes
+             that have occurred since the last start-up of the
+             OSPFv3 routing process.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3AreaEntry 14 }
+
+ ospfv3AreaStubMetricType OBJECT-TYPE
+         SYNTAX       INTEGER {
+                         ospfv3Metric(1),   -- OSPF Metric
+                         comparableCost(2), -- external type 1
+                         nonComparable(3)   -- external type 2
+                         }
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+             "This variable assigns the type of metric
+             advertised as a default route."
+         DEFVAL { ospfv3Metric }
+         ::= { ospfv3AreaEntry 15 }
+
+ ospfv3AreaTEEnabled OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+                "Indicates whether or not traffic engineering
+                is enabled in the area.  The object is set
+                to the value true (1) to enable traffic engineering.
+                Traffic engineering is disabled by default."
+         DEFVAL { false }
+         ::= { ospfv3AreaEntry 16 }
+
+ -- OSPFv3 AS-Scope Link State Database
+
+ ospfv3AsLsdbTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3AsLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 Process's AS-scope link state database
+             (LSDB).  The LSDB contains the AS-scope link state
+             advertisements from throughout the areas that the
+             device is attached to."
+         ::= { ospfv3Objects 3 }
+
+ ospfv3AsLsdbEntry OBJECT-TYPE
+         SYNTAX          Ospfv3AsLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A single AS-scope link state advertisement."
+         INDEX           { ospfv3AsLsdbType,
+                           ospfv3AsLsdbRouterId,
+                           ospfv3AsLsdbLsid }
+         ::= { ospfv3AsLsdbTable 1 }
+
+ Ospfv3AsLsdbEntry ::= SEQUENCE {
+         ospfv3AsLsdbType
+                 Unsigned32,
+         ospfv3AsLsdbRouterId
+                 Ospfv3RouterIdTC,
+         ospfv3AsLsdbLsid
+                 Ospfv3LsIdTC,
+         ospfv3AsLsdbSequence
+                 Ospfv3LsaSequenceTC,
+         ospfv3AsLsdbAge
+                 Ospfv3LsaAgeTC,
+         ospfv3AsLsdbChecksum
+                 Integer32,
+         ospfv3AsLsdbAdvertisement
+                 OCTET STRING,
+         ospfv3AsLsdbTypeKnown
+                 TruthValue
+         }
+
+ ospfv3AsLsdbType OBJECT-TYPE
+         SYNTAX          Unsigned32(0..'FFFFFFFF'h)
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The type of the link state advertisement.
+             Each link state type has a separate
+             advertisement format.  AS-scope LSAs not recognized
+             by the router may be stored in the database."
+         ::= { ospfv3AsLsdbEntry 1 }
+
+ ospfv3AsLsdbRouterId OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit number that uniquely identifies the
+             originating router in the Autonomous System."
+         REFERENCE
+             "OSPF Version 2, Appendix C.1, Global parameters"
+         ::= { ospfv3AsLsdbEntry 2 }
+
+ ospfv3AsLsdbLsid OBJECT-TYPE
+         SYNTAX          Ospfv3LsIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Link State ID is an LS type-specific field
+             containing a unique identifier;
+             it identifies the piece of the routing domain
+             that is being described by the advertisement.
+             In contrast to OSPFv2, the LSID has no
+             addressing semantics."
+         ::= { ospfv3AsLsdbEntry 3 }
+
+ -- Note that the OSPF sequence number is a 32-bit signed
+ -- integer.  It starts with the value '80000001'h
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+ -- Thus, a typical sequence number will be very negative.
+
+ ospfv3AsLsdbSequence OBJECT-TYPE
+         SYNTAX          Ospfv3LsaSequenceTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The sequence number field is a signed 32-bit
+             integer.  It is used to detect old and duplicate
+             link state advertisements.  The space of
+             sequence numbers is linearly ordered.  The
+             larger the sequence number, the more recent the
+             advertisement."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.6, LS sequence
+             number"
+         ::= { ospfv3AsLsdbEntry 4 }
+
+ ospfv3AsLsdbAge OBJECT-TYPE
+         SYNTAX          Ospfv3LsaAgeTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the age of the link state
+             advertisement in seconds.  The high-order bit
+             of the LS age field is considered the DoNotAge
+             bit for support of on-demand circuits."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.1, LS age;
+              Extending OSPF to Support Demand Circuits,
+              Section 2.2, The LS age field."
+         ::= { ospfv3AsLsdbEntry 5 }
+
+ ospfv3AsLsdbChecksum OBJECT-TYPE
+         SYNTAX          Integer32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the checksum of the complete
+             contents of the advertisement, excepting the
+             age field.  The age field is excepted so that
+             an advertisement's age can be incremented
+             without updating the checksum.  The checksum
+             used is the same that is used for ISO
+             connectionless datagrams; it is commonly
+             referred to as the Fletcher checksum."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.7, LS checksum"
+         ::= { ospfv3AsLsdbEntry 6 }
+
+ ospfv3AsLsdbAdvertisement OBJECT-TYPE
+         SYNTAX          OCTET STRING (SIZE (1..65535))
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The entire link state advertisement, including
+             its header."
+         ::= { ospfv3AsLsdbEntry 7 }
+
+ ospfv3AsLsdbTypeKnown OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The value true (1) indicates that the LSA type
+             is recognized by this router."
+         ::= { ospfv3AsLsdbEntry 8 }
+
+  --  OSPFv3 Area-Scope Link State Database
+
+ ospfv3AreaLsdbTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3AreaLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 Process's Area-scope LSDB.
+             The LSDB contains the Area-scope link state
+             advertisements from throughout the area that the
+             device is attached to."
+         ::= { ospfv3Objects 4 }
+
+ ospfv3AreaLsdbEntry OBJECT-TYPE
+         SYNTAX          Ospfv3AreaLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A single Area-scope link state advertisement."
+         INDEX           { ospfv3AreaLsdbAreaId,
+                           ospfv3AreaLsdbType,
+                           ospfv3AreaLsdbRouterId,
+                           ospfv3AreaLsdbLsid }
+         ::= { ospfv3AreaLsdbTable 1 }
+
+ Ospfv3AreaLsdbEntry ::= SEQUENCE {
+         ospfv3AreaLsdbAreaId
+                 Ospfv3AreaIdTC,
+         ospfv3AreaLsdbType
+                 Unsigned32,
+         ospfv3AreaLsdbRouterId
+                 Ospfv3RouterIdTC,
+         ospfv3AreaLsdbLsid
+                 Ospfv3LsIdTC,
+         ospfv3AreaLsdbSequence
+                 Ospfv3LsaSequenceTC,
+         ospfv3AreaLsdbAge
+                 Ospfv3LsaAgeTC,
+         ospfv3AreaLsdbChecksum
+                 Integer32,
+         ospfv3AreaLsdbAdvertisement
+                 OCTET STRING,
+         ospfv3AreaLsdbTypeKnown
+                 TruthValue
+         }
+
+ ospfv3AreaLsdbAreaId OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit identifier of the Area from which the
+             LSA was received."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         ::= { ospfv3AreaLsdbEntry 1 }
+
+ ospfv3AreaLsdbType OBJECT-TYPE
+         SYNTAX          Unsigned32(0..'FFFFFFFF'h)
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The type of the link state advertisement.
+             Each link state type has a separate
+             advertisement format.  Area-scope LSAs unrecognized
+             by the router are also stored in this database."
+         ::= { ospfv3AreaLsdbEntry 2 }
+
+ ospfv3AreaLsdbRouterId OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit number that uniquely identifies the
+             originating router in the Autonomous System."
+         REFERENCE
+             "OSPF Version 2, Appendix C.1, Global parameters"
+         ::= { ospfv3AreaLsdbEntry 3 }
+
+ ospfv3AreaLsdbLsid OBJECT-TYPE
+         SYNTAX          Ospfv3LsIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Link State ID is an LS type-specific field
+             containing a unique identifier;
+             it identifies the piece of the routing domain
+             that is being described by the advertisement.
+             In contrast to OSPFv2, the LSID has no
+             addressing semantics."
+         ::= { ospfv3AreaLsdbEntry 4 }
+
+ -- Note that the OSPF sequence number is a 32-bit signed
+ -- integer.  It starts with the value '80000001'h
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+ -- Thus, a typical sequence number will be very negative.
+
+ ospfv3AreaLsdbSequence OBJECT-TYPE
+         SYNTAX          Ospfv3LsaSequenceTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The sequence number field is a signed 32-bit
+             integer.  It is used to detect old and
+             duplicate link state advertisements.  The space
+             of sequence numbers is linearly ordered.  The
+             larger the sequence number, the more recent the
+             advertisement."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.6, LS sequence
+             number"
+         ::= { ospfv3AreaLsdbEntry 5 }
+
+ ospfv3AreaLsdbAge OBJECT-TYPE
+         SYNTAX          Ospfv3LsaAgeTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the age of the link state
+             advertisement in seconds.  The high-order bit
+             of the LS age field is considered the DoNotAge
+             bit for support of on-demand circuits."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.1, LS age;
+              Extending OSPF to Support Demand Circuits,
+              Section 2.2, The LS age field."
+         ::= { ospfv3AreaLsdbEntry 6 }
+
+ ospfv3AreaLsdbChecksum OBJECT-TYPE
+         SYNTAX          Integer32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the checksum of the complete
+             contents of the advertisement, excepting the
+             age field.  The age field is excepted so that
+             an advertisement's age can be incremented
+             without updating the checksum.  The checksum
+             used is the same that is used for ISO
+             connectionless datagrams; it is commonly
+             referred to as the Fletcher checksum."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.7, LS checksum"
+         ::= { ospfv3AreaLsdbEntry 7 }
+
+ ospfv3AreaLsdbAdvertisement OBJECT-TYPE
+         SYNTAX          OCTET STRING (SIZE (1..65535))
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The entire link state advertisement, including
+             its header."
+         ::= { ospfv3AreaLsdbEntry 8 }
+
+ ospfv3AreaLsdbTypeKnown OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The value true (1) indicates that the LSA type is
+             recognized by this router."
+         ::= { ospfv3AreaLsdbEntry 9 }
+
+ -- OSPFv3 Link-Scope Link State Database, for non-virtual interfaces
+
+ ospfv3LinkLsdbTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3LinkLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 Process's Link-scope LSDB for non-virtual
+             interfaces.  The LSDB contains the Link-scope link
+             state advertisements from the interfaces that the
+             device is attached to."
+         ::= { ospfv3Objects 5 }
+
+ ospfv3LinkLsdbEntry OBJECT-TYPE
+         SYNTAX          Ospfv3LinkLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A single Link-scope link state advertisement."
+         INDEX           { ospfv3LinkLsdbIfIndex,
+                           ospfv3LinkLsdbIfInstId,
+                           ospfv3LinkLsdbType,
+                           ospfv3LinkLsdbRouterId,
+                           ospfv3LinkLsdbLsid }
+         ::= { ospfv3LinkLsdbTable 1 }
+
+ Ospfv3LinkLsdbEntry ::= SEQUENCE {
+         ospfv3LinkLsdbIfIndex
+                 InterfaceIndex,
+         ospfv3LinkLsdbIfInstId
+                 Ospfv3IfInstIdTC,
+         ospfv3LinkLsdbType
+                 Unsigned32,
+         ospfv3LinkLsdbRouterId
+                 Ospfv3RouterIdTC,
+         ospfv3LinkLsdbLsid
+                 Ospfv3LsIdTC,
+         ospfv3LinkLsdbSequence
+                 Ospfv3LsaSequenceTC,
+         ospfv3LinkLsdbAge
+                 Ospfv3LsaAgeTC,
+         ospfv3LinkLsdbChecksum
+                 Integer32,
+         ospfv3LinkLsdbAdvertisement
+                 OCTET STRING,
+         ospfv3LinkLsdbTypeKnown
+                 TruthValue
+         }
+
+ ospfv3LinkLsdbIfIndex OBJECT-TYPE
+         SYNTAX         InterfaceIndex
+         MAX-ACCESS     not-accessible
+         STATUS         current
+         DESCRIPTION
+             "The identifier of the link from which the LSA
+             was received."
+         ::= { ospfv3LinkLsdbEntry 1 }
+
+ ospfv3LinkLsdbIfInstId OBJECT-TYPE
+         SYNTAX         Ospfv3IfInstIdTC
+         MAX-ACCESS     not-accessible
+         STATUS         current
+         DESCRIPTION
+             "The identifier of the interface instance from
+             which the LSA was received."
+         ::= { ospfv3LinkLsdbEntry 2 }
+
+ ospfv3LinkLsdbType OBJECT-TYPE
+         SYNTAX          Unsigned32(0..'FFFFFFFF'h)
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The type of the link state advertisement.
+             Each link state type has a separate
+             advertisement format.  Link-scope LSAs unrecognized
+             by the router are also stored in this database."
+         ::= { ospfv3LinkLsdbEntry 3 }
+
+ ospfv3LinkLsdbRouterId OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit number that uniquely identifies the
+             originating router in the Autonomous System."
+         REFERENCE
+             "OSPF Version 2, Appendix C.1, Global parameters"
+         ::= { ospfv3LinkLsdbEntry 4 }
+
+ ospfv3LinkLsdbLsid OBJECT-TYPE
+         SYNTAX        Ospfv3LsIdTC
+         MAX-ACCESS    not-accessible
+         STATUS        current
+         DESCRIPTION
+             "The Link State ID is an LS type-specific field
+             containing a unique identifier;
+             it identifies the piece of the routing domain
+             that is being described by the advertisement.
+             In contrast to OSPFv2, the LSID has no
+             addressing semantics.  However, in OSPFv3
+             the Link State ID always contains the flooding
+             scope of the LSA."
+         ::= { ospfv3LinkLsdbEntry 5 }
+
+ -- Note that the OSPF sequence number is a 32-bit signed
+ -- integer.  It starts with the value '80000001'h
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+ -- Thus, a typical sequence number will be very negative.
+
+ ospfv3LinkLsdbSequence OBJECT-TYPE
+         SYNTAX          Ospfv3LsaSequenceTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The sequence number field is a signed 32-bit
+             integer.  It is used to detect old and duplicate
+             link state advertisements.  The space of
+             sequence numbers is linearly ordered.  The
+             larger the sequence number, the more recent the
+             advertisement."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.6, LS sequence
+             number"
+         ::= { ospfv3LinkLsdbEntry 6 }
+
+ ospfv3LinkLsdbAge OBJECT-TYPE
+         SYNTAX          Ospfv3LsaAgeTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the age of the link state
+             advertisement in seconds.  The high-order bit
+             of the LS age field is considered the DoNotAge
+             bit for support of on-demand circuits."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.1, LS age;
+              Extending OSPF to Support Demand Circuits,
+              Section 2.2, The LS age field."
+         ::= { ospfv3LinkLsdbEntry 7 }
+
+ ospfv3LinkLsdbChecksum OBJECT-TYPE
+         SYNTAX          Integer32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the checksum of the complete
+             contents of the advertisement, excepting the
+             age field.  The age field is excepted so that
+             an advertisement's age can be incremented
+             without updating the checksum.  The checksum
+             used is the same that is used for ISO
+             connectionless datagrams; it is commonly
+             referred to as the Fletcher checksum."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.7, LS checksum"
+         ::= { ospfv3LinkLsdbEntry 8 }
+
+ ospfv3LinkLsdbAdvertisement OBJECT-TYPE
+         SYNTAX          OCTET STRING (SIZE (1..65535))
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The entire link state advertisement, including
+             its header."
+         ::= { ospfv3LinkLsdbEntry 9 }
+
+ ospfv3LinkLsdbTypeKnown OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The value true (1) indicates that the LSA type is
+             recognized by this router."
+         ::= { ospfv3LinkLsdbEntry 10 }
+
+ -- OSPF Host Table
+
+ ospfv3HostTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3HostEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Host/Metric Table indicates what hosts are
+             directly attached to the router and their
+             corresponding metrics."
+         REFERENCE
+             "OSPF Version 2, Appendix C.7, Host route
+             parameters"
+         ::= { ospfv3Objects 6 }
+
+ ospfv3HostEntry OBJECT-TYPE
+         SYNTAX          Ospfv3HostEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A metric to be advertised when a given host is
+             reachable.
+
+             The information in this table is persistent, and
+             when written, the entity SHOULD save the change
+             to non-volatile storage."
+         INDEX           { ospfv3HostAddressType,
+                           ospfv3HostAddress }
+         ::= { ospfv3HostTable 1 }
+
+ Ospfv3HostEntry ::= SEQUENCE {
+         ospfv3HostAddressType
+                 InetAddressType,
+         ospfv3HostAddress
+                 InetAddress,
+         ospfv3HostMetric
+                 Metric,
+         ospfv3HostRowStatus
+                 RowStatus,
+         ospfv3HostAreaID
+                 Ospfv3AreaIdTC
+         }
+
+ ospfv3HostAddressType OBJECT-TYPE
+         SYNTAX          InetAddressType
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The address type of ospfv3HostAddress.  Only IPv6
+             global address type is expected."
+         REFERENCE
+             "OSPF Version 2, Appendix C.7, Host route
+             parameters"
+         ::= { ospfv3HostEntry 1 }
+
+ ospfv3HostAddress OBJECT-TYPE
+         SYNTAX          InetAddress
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The IPv6 address of the host.  Must be an
+             IPv6 global address."
+         REFERENCE
+             "OSPF Version 2, Appendix C.7, Host route
+             parameters"
+         ::= { ospfv3HostEntry 2 }
+
+ ospfv3HostMetric OBJECT-TYPE
+         SYNTAX          Metric
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The metric to be advertised."
+         REFERENCE
+             "OSPF Version 2, Appendix C.7, Host route
+             parameters"
+         ::= { ospfv3HostEntry 3 }
+
+ ospfv3HostRowStatus OBJECT-TYPE
+         SYNTAX          RowStatus
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This object permits management of the table by
+             facilitating actions such as row creation,
+             construction, and destruction.
+
+             The value of this object has no effect on
+             whether other objects in this conceptual row can be
+             modified."
+         ::= { ospfv3HostEntry 4 }
+
+ ospfv3HostAreaID OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The Area the host entry is to be found within.
+             By default, the area for the subsuming OSPFv3
+             interface, or Area 0 if there is no subsuming
+             interface."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         ::= { ospfv3HostEntry 5 }
+
+ -- OSPFv3 Interface Table
+
+ ospfv3IfTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3IfEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 Interface Table describes the
+             interfaces from the viewpoint of OSPFv3."
+         REFERENCE
+             "OSPF for IPv6, Appendix C.3, Router Interface
+             Parameters"
+         ::= { ospfv3Objects 7 }
+
+ ospfv3IfEntry OBJECT-TYPE
+         SYNTAX          Ospfv3IfEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 Interface Entry describes one
+             interface from the viewpoint of OSPFv3.
+
+             The information in this table is persistent,
+             and when written, the entity SHOULD save the
+             change to non-volatile storage."
+         INDEX           { ospfv3IfIndex,
+                           ospfv3IfInstId }
+         ::= { ospfv3IfTable 1 }
+
+ Ospfv3IfEntry ::= SEQUENCE {
+         ospfv3IfIndex
+                 InterfaceIndex,
+         ospfv3IfInstId
+                 Ospfv3IfInstIdTC,
+         ospfv3IfAreaId
+                 Ospfv3AreaIdTC,
+         ospfv3IfType
+                 INTEGER,
+         ospfv3IfAdminStatus
+                 Status,
+         ospfv3IfRtrPriority
+                 DesignatedRouterPriority,
+         ospfv3IfTransitDelay
+                 Ospfv3UpToRefreshIntervalTC,
+         ospfv3IfRetransInterval
+                 Ospfv3UpToRefreshIntervalTC,
+         ospfv3IfHelloInterval
+                 HelloRange,
+         ospfv3IfRtrDeadInterval
+                  Ospfv3DeadIntervalRangeTC,
+         ospfv3IfPollInterval
+                 Unsigned32,
+         ospfv3IfState
+                 INTEGER,
+         ospfv3IfDesignatedRouter
+                 Ospfv3RouterIdTC,
+         ospfv3IfBackupDesignatedRouter
+                 Ospfv3RouterIdTC,
+         ospfv3IfEvents
+                 Counter32,
+         ospfv3IfRowStatus
+                 RowStatus,
+         ospfv3IfDemand
+                 TruthValue,
+         ospfv3IfMetricValue
+                 Metric,
+         ospfv3IfLinkScopeLsaCount
+                 Gauge32,
+         ospfv3IfLinkLsaCksumSum
+                 Unsigned32,
+         ospfv3IfDemandNbrProbe
+                 TruthValue,
+         ospfv3IfDemandNbrProbeRetransLimit
+                 Unsigned32,
+         ospfv3IfDemandNbrProbeInterval
+                 Unsigned32,
+         ospfv3IfTEDisabled
+                 TruthValue,
+         ospfv3IfLinkLSASuppression
+                 TruthValue
+         }
+
+ ospfv3IfIndex OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The interface index of this OSPFv3 interface.
+             It corresponds to the interface index of the
+             IPv6 interface on which OSPFv3 is configured."
+         ::= { ospfv3IfEntry 1 }
+
+ ospfv3IfInstId OBJECT-TYPE
+         SYNTAX          Ospfv3IfInstIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Enables multiple interface instances of OSPFv3
+             to be run over a single link.  Each interface
+             instance would be assigned a separate ID.  This ID
+             has local link significance only."
+         ::= { ospfv3IfEntry 2 }
+
+ ospfv3IfAreaId OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "A 32-bit integer uniquely identifying the area
+             to which the interface connects.  Area ID
+             0 is used for the OSPFv3 backbone."
+         DEFVAL          { 0 }
+         ::= { ospfv3IfEntry 3 }
+
+ ospfv3IfType OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         broadcast(1),
+                         nbma(2),
+                         pointToPoint(3),
+                         pointToMultipoint(5)
+                         }
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 interface type."
+         ::= { ospfv3IfEntry 4 }
+
+ ospfv3IfAdminStatus OBJECT-TYPE
+         SYNTAX          Status
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 interface's administrative status.
+             The value formed on the interface; the interface
+             will be advertised as an internal route to some
+             area.  The value 'disabled' denotes that the
+             interface is external to OSPFv3.
+
+             Note that a value of 'disabled' for the object
+             ospfv3AdminStatus will override a value of
+             'enabled' for the interface."
+         DEFVAL          { enabled }
+         ::= { ospfv3IfEntry 5 }
+
+ ospfv3IfRtrPriority OBJECT-TYPE
+         SYNTAX          DesignatedRouterPriority
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The priority of this interface.  Used in
+             multi-access networks, this field is used in
+             the designated-router election algorithm.  The
+             value 0 signifies that the router is not
+             eligible to become the Designated Router on this
+             particular network.  In the event of a tie in
+             this value, routers will use their Router ID as
+             a tie breaker."
+         DEFVAL          { 1 }
+         ::= { ospfv3IfEntry 6 }
+
+ ospfv3IfTransitDelay OBJECT-TYPE
+         SYNTAX          Ospfv3UpToRefreshIntervalTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The estimated number of seconds it takes to transmit
+             a Link State Update packet over this interface.  LSAs
+             contained in the update packet must have their age
+             incremented by this amount before transmission.  This
+             value should take into account the transmission and
+             propagation delays of the interface."
+         REFERENCE
+             "OSPF for IPv6, Appendix C.3, Router Interface
+             Parameters."
+         DEFVAL          { 1 }
+         ::= { ospfv3IfEntry 7 }
+
+ ospfv3IfRetransInterval OBJECT-TYPE
+         SYNTAX          Ospfv3UpToRefreshIntervalTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The number of seconds between link state
+             advertisement retransmissions for adjacencies
+
+             belonging to this interface.  This value is
+             also used when retransmitting database
+             description and Link State Request packets."
+         DEFVAL          { 5 }
+         ::= { ospfv3IfEntry 8 }
+
+ ospfv3IfHelloInterval OBJECT-TYPE
+         SYNTAX          HelloRange
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The length of time, in seconds, between the
+             Hello packets that the router sends on the
+             interface.  This value must be the same for all
+             routers attached to a common network."
+         DEFVAL          { 10 }
+         ::= { ospfv3IfEntry 9 }
+
+ ospfv3IfRtrDeadInterval OBJECT-TYPE
+         SYNTAX          Ospfv3DeadIntervalRangeTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The number of seconds that a router's Hello
+             packets have not been seen before its
+             neighbors declare the router down on the interface.
+             This should be some multiple of the Hello interval.
+             This value must be the same for all routers attached
+             to a common network."
+         DEFVAL          { 40 }
+         ::= { ospfv3IfEntry 10 }
+
+ ospfv3IfPollInterval OBJECT-TYPE
+         SYNTAX          Unsigned32
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The larger time interval, in seconds, between
+             the Hello packets sent to an inactive,
+             non-broadcast multi-access neighbor."
+         DEFVAL          { 120 }
+         ::= { ospfv3IfEntry 11 }
+
+ ospfv3IfState OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         down(1),
+                         loopback(2),
+                         waiting(3),
+                         pointToPoint(4),
+                         designatedRouter(5),
+                         backupDesignatedRouter(6),
+                         otherDesignatedRouter(7),
+                         standby(8)
+                         }
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 interface state.  An interface may be
+             in standby state if there are multiple interfaces
+             on the link and another interface is active.  The
+             interface may be in Down state if the underlying
+             IPv6 interface is down or if the admin status is
+             'disabled' either globally or for the interface."
+         ::= { ospfv3IfEntry 12 }
+
+ ospfv3IfDesignatedRouter OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The Router ID of the Designated Router."
+         ::= { ospfv3IfEntry 13 }
+
+ ospfv3IfBackupDesignatedRouter OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The Router ID of the Backup Designated
+             Router."
+         ::= { ospfv3IfEntry 14 }
+
+ ospfv3IfEvents OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of times this OSPFv3 interface has
+             changed its state or an error has occurred.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3IfEntry 15 }
+
+  ospfv3IfRowStatus OBJECT-TYPE
+         SYNTAX          RowStatus
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This object permits management of the table by
+             facilitating actions such as row creation,
+             construction, and destruction.
+
+             The value of this object has no effect on
+             whether other objects in this conceptual row can be
+             modified."
+         ::= { ospfv3IfEntry 16 }
+
+ ospfv3IfDemand OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "Indicates whether Demand OSPFv3 procedures
+             (Hello suppression to FULL neighbors and
+             setting the DoNotAge flag on propagated LSAs)
+             should be performed on this interface."
+         DEFVAL { false }
+         ::= { ospfv3IfEntry 17 }
+
+ ospfv3IfMetricValue OBJECT-TYPE
+         SYNTAX          Metric
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The metric assigned to this interface.
+              The default value of the metric is
+              'Reference Bandwidth / ifSpeed'.  The value
+              of the reference bandwidth can be set
+              in the ospfv3ReferenceBandwidth object."
+         ::= { ospfv3IfEntry 18 }
+
+  ospfv3IfLinkScopeLsaCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The total number of Link-scope link state
+             advertisements in this link's link state
+             database."
+         ::= { ospfv3IfEntry 19 }
+
+  ospfv3IfLinkLsaCksumSum OBJECT-TYPE
+         SYNTAX          Unsigned32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit unsigned sum of the Link-scope link state
+             advertisements' LS checksums contained in this
+             link's link state database.  The sum can be used
+             to determine if there has been a change in a
+             router's link state database or to compare the
+             link state database of two routers."
+         ::= { ospfv3IfEntry 20 }
+
+ ospfv3IfDemandNbrProbe OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+                "Indicates whether or not neighbor probing is
+                enabled to determine whether or not the neighbor
+                is inactive.  Neighbor probing is disabled by
+                default."
+         DEFVAL { false }
+         ::= { ospfv3IfEntry 21 }
+
+ospfv3IfDemandNbrProbeRetransLimit OBJECT-TYPE
+        SYNTAX       Unsigned32
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+           "The number of consecutive LSA retransmissions before
+           the neighbor is deemed inactive and the neighbor
+           adjacency is brought down."
+        DEFVAL          { 10 }
+        ::= { ospfv3IfEntry 22}
+
+ospfv3IfDemandNbrProbeInterval OBJECT-TYPE
+        SYNTAX       Unsigned32
+        UNITS        "seconds"
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+           "Defines how often the neighbor will be probed."
+        DEFVAL          { 120 }
+        ::= { ospfv3IfEntry 23 }
+
+ ospfv3IfTEDisabled OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "Indicates whether or not traffic engineering
+           is disabled on the interface when traffic
+           engineering is enabled in the area where the
+           interface is attached.  The object is set
+           to the value true (1) to disable traffic engineering
+           on the interface.  Traffic engineering is enabled
+           by default on the interface when traffic engineering
+           is enabled in the area where the interface is
+           attached."
+        DEFVAL { false }
+        ::= { ospfv3IfEntry 24 }
+
+ ospfv3IfLinkLSASuppression OBJECT-TYPE
+        SYNTAX          TruthValue
+        MAX-ACCESS      read-create
+        STATUS          current
+        DESCRIPTION
+           "Specifies whether or not link LSA origination is
+           suppressed for broadcast or NBMA interface types.
+           The object is set to value true (1) to suppress
+           the origination."
+        REFERENCE
+             "OSPF for IPv6, Appendix C.3, Router Interface
+                 Parameters"
+        DEFVAL { false }
+        ::= { ospfv3IfEntry 25 }
+
+ -- OSPFv3 Virtual Interface Table
+
+ ospfv3VirtIfTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3VirtIfEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Information about this router's virtual
+             interfaces that the OSPFv3 Process is configured
+             to carry on."
+         REFERENCE
+             "OSPF for IPv6, Appendix C.4, Virtual Link
+             Parameters"
+         ::= { ospfv3Objects 8 }
+
+ ospfv3VirtIfEntry OBJECT-TYPE
+         SYNTAX          Ospfv3VirtIfEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Information about a single virtual interface.
+
+             The information in this table is persistent,
+             and when written, the entity SHOULD save the
+             change to non-volatile storage."
+         INDEX           { ospfv3VirtIfAreaId,
+                           ospfv3VirtIfNeighbor }
+         ::= { ospfv3VirtIfTable 1 }
+
+ Ospfv3VirtIfEntry ::= SEQUENCE {
+         ospfv3VirtIfAreaId
+                 Ospfv3AreaIdTC,
+         ospfv3VirtIfNeighbor
+                 Ospfv3RouterIdTC,
+         ospfv3VirtIfIndex
+                 InterfaceIndex,
+         ospfv3VirtIfInstId
+                 Ospfv3IfInstIdTC,
+         ospfv3VirtIfTransitDelay
+                 Ospfv3UpToRefreshIntervalTC,
+         ospfv3VirtIfRetransInterval
+                 Ospfv3UpToRefreshIntervalTC,
+         ospfv3VirtIfHelloInterval
+                 HelloRange,
+         ospfv3VirtIfRtrDeadInterval
+                 Ospfv3DeadIntervalRangeTC,
+         ospfv3VirtIfState
+                 INTEGER,
+         ospfv3VirtIfEvents
+                 Counter32,
+         ospfv3VirtIfRowStatus
+                 RowStatus,
+         ospfv3VirtIfLinkScopeLsaCount
+                 Gauge32,
+         ospfv3VirtIfLinkLsaCksumSum
+                 Unsigned32
+         }
+
+ ospfv3VirtIfAreaId OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The transit area that the virtual link
+             traverses.  By definition, this is not
+             Area 0."
+         ::= { ospfv3VirtIfEntry 1 }
+
+ ospfv3VirtIfNeighbor OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Router ID of the virtual neighbor."
+         ::= { ospfv3VirtIfEntry 2 }
+
+ ospfv3VirtIfIndex OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The local interface index assigned by the
+             OSPFv3 Process to this OSPFv3 virtual interface.
+             It is advertised in Hellos sent over the virtual
+             link and in the router's router-LSAs."
+         ::= { ospfv3VirtIfEntry 3 }
+
+ ospfv3VirtIfInstId OBJECT-TYPE
+         SYNTAX          Ospfv3IfInstIdTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The local Interface Instance ID assigned by the
+             OSPFv3 Process to this OSPFv3 virtual interface."
+         ::= { ospfv3VirtIfEntry 4 }
+
+ ospfv3VirtIfTransitDelay OBJECT-TYPE
+         SYNTAX          Ospfv3UpToRefreshIntervalTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The estimated number of seconds it takes to
+             transmit a Link State Update packet over this
+             interface."
+         DEFVAL          { 1 }
+         ::= { ospfv3VirtIfEntry 5 }
+
+ ospfv3VirtIfRetransInterval OBJECT-TYPE
+         SYNTAX          Ospfv3UpToRefreshIntervalTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The number of seconds between link state
+             advertisement retransmissions for adjacencies
+             belonging to this interface.  This value is
+             also used when retransmitting database
+             description and Link State Request packets.  This
+             value should be well over the expected
+             round-trip time."
+         DEFVAL          { 5 }
+         ::= { ospfv3VirtIfEntry 6 }
+
+ ospfv3VirtIfHelloInterval OBJECT-TYPE
+         SYNTAX          HelloRange
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The length of time, in seconds, between the
+             Hello packets that the router sends on the
+             interface.  This value must be the same for the
+             virtual neighbor."
+         DEFVAL          { 10 }
+         ::= { ospfv3VirtIfEntry 7 }
+
+ ospfv3VirtIfRtrDeadInterval OBJECT-TYPE
+         SYNTAX          Ospfv3DeadIntervalRangeTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The number of seconds that a router's Hello
+             packets have not been seen before its
+             neighbors declare the router down.  This should
+             be some multiple of the Hello interval.  This
+             value must be the same for the virtual
+             neighbor."
+         DEFVAL          { 60 }
+         ::= { ospfv3VirtIfEntry 8 }
+
+ ospfv3VirtIfState OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         down(1),
+                         pointToPoint(4)
+                         }
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "OSPF virtual interface states.  The same encoding
+             as the ospfV3IfTable is used."
+         ::= { ospfv3VirtIfEntry 9 }
+
+ ospfv3VirtIfEvents OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of state changes or error events on
+             this virtual link.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3VirtIfEntry 10 }
+
+ ospfv3VirtIfRowStatus OBJECT-TYPE
+         SYNTAX          RowStatus
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This object permits management of the table by
+             facilitating actions such as row creation,
+             construction, and destruction.
+
+             The value of this object has no effect on
+             whether other objects in this conceptual row can be
+             modified."
+         ::= { ospfv3VirtIfEntry 11 }
+
+ ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The total number of Link-scope link state
+             advertisements in this virtual link's link state
+             database."
+         ::= { ospfv3VirtIfEntry 12 }
+
+ ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
+         SYNTAX          Unsigned32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit unsigned sum of the Link-scope link state
+             advertisements' LS checksums contained in this
+             virtual link's link state database.  The sum can be used
+             to determine if there has been a change in a
+             router's link state database or to compare the
+             link state database of two routers."
+         ::= { ospfv3VirtIfEntry 13 }
+
+ -- OSPFv3 Neighbor Table
+
+ ospfv3NbrTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3NbrEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A table describing all neighbors in the
+             locality of the OSPFv3 router."
+         REFERENCE
+             "OSPF Version 2, Section 10, The Neighbor Data
+             Structure"
+         ::= { ospfv3Objects 9 }
+
+ ospfv3NbrEntry OBJECT-TYPE
+         SYNTAX          Ospfv3NbrEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The information regarding a single neighbor."
+         REFERENCE
+             "OSPF Version 2, Section 10, The Neighbor Data
+             Structure"
+         INDEX           { ospfv3NbrIfIndex,
+                           ospfv3NbrIfInstId,
+                           ospfv3NbrRtrId }
+         ::= { ospfv3NbrTable 1 }
+
+ Ospfv3NbrEntry ::= SEQUENCE {
+         ospfv3NbrIfIndex
+                 InterfaceIndex,
+         ospfv3NbrIfInstId
+                 Ospfv3IfInstIdTC,
+         ospfv3NbrRtrId
+                 Ospfv3RouterIdTC,
+         ospfv3NbrAddressType
+                 InetAddressType,
+         ospfv3NbrAddress
+                 InetAddress,
+         ospfv3NbrOptions
+                 Integer32,
+         ospfv3NbrPriority
+                 DesignatedRouterPriority,
+         ospfv3NbrState
+                 INTEGER,
+         ospfv3NbrEvents
+                 Counter32,
+         ospfv3NbrLsRetransQLen
+                 Gauge32,
+         ospfv3NbrHelloSuppressed
+                 TruthValue,
+         ospfv3NbrIfId
+                 InterfaceIndex,
+         ospfv3NbrRestartHelperStatus
+                 INTEGER,
+         ospfv3NbrRestartHelperAge
+                 Ospfv3UpToRefreshIntervalTC,
+         ospfv3NbrRestartHelperExitReason
+                 INTEGER
+         }
+
+ ospfv3NbrIfIndex OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Local Link ID of the link over which the
+              neighbor can be reached."
+         ::= { ospfv3NbrEntry 1 }
+
+ ospfv3NbrIfInstId OBJECT-TYPE
+         SYNTAX          Ospfv3IfInstIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Interface instance over which the neighbor
+             can be reached.  This ID has local link
+             significance only."
+         ::= { ospfv3NbrEntry 2 }
+
+ ospfv3NbrRtrId OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A 32-bit unsigned integer uniquely identifying the
+             neighboring router in the Autonomous System."
+         ::= { ospfv3NbrEntry 3 }
+
+ ospfv3NbrAddressType OBJECT-TYPE
+         SYNTAX          InetAddressType
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The address type of ospfv3NbrAddress.  Only IPv6
+             addresses without zone index are expected."
+         ::= { ospfv3NbrEntry 4 }
+
+ ospfv3NbrAddress OBJECT-TYPE
+         SYNTAX          InetAddress
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The IPv6 address of the neighbor associated with
+             the local link."
+         ::= { ospfv3NbrEntry 5 }
+
+ ospfv3NbrOptions OBJECT-TYPE
+         SYNTAX          Integer32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "A bit mask corresponding to the neighbor's
+             options field."
+         REFERENCE
+             "OSPF for IPv6, Appendix A.2, The Options Field"
+         ::= { ospfv3NbrEntry 6 }
+
+ ospfv3NbrPriority OBJECT-TYPE
+         SYNTAX          DesignatedRouterPriority
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The priority of this neighbor in the designated-
+             router election algorithm.  The value 0 signifies
+             that the neighbor is not eligible to become the
+             Designated Router on this particular network."
+         ::= { ospfv3NbrEntry 7 }
+
+ ospfv3NbrState OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         down(1),
+                         attempt(2),
+                         init(3),
+                         twoWay(4),
+                         exchangeStart(5),
+                         exchange(6),
+                         loading(7),
+                         full(8)
+                         }
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The state of the relationship with this
+             neighbor."
+         REFERENCE
+             "OSPF Version 2, Section 10.1, Neighbor states"
+         ::= { ospfv3NbrEntry 8 }
+
+ ospfv3NbrEvents OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of times this neighbor relationship
+             has changed state or an error has occurred.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3NbrEntry 9 }
+
+ ospfv3NbrLsRetransQLen OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The current length of the retransmission
+             queue."
+         ::= { ospfv3NbrEntry 10 }
+
+ ospfv3NbrHelloSuppressed OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "Indicates whether Hellos are being suppressed
+             to the neighbor."
+         ::= { ospfv3NbrEntry 11 }
+
+ ospfv3NbrIfId OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The Interface ID that the neighbor advertises
+             in its Hello packets on this link, that is, the
+             neighbor's local interface index."
+         ::= { ospfv3NbrEntry 12 }
+
+ ospfv3NbrRestartHelperStatus OBJECT-TYPE
+        SYNTAX       INTEGER { notHelping(1),
+                               helping(2)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "Indicates whether the router is acting
+           as a graceful restart helper for the neighbor."
+           ::= { ospfv3NbrEntry 13 }
+
+ ospfv3NbrRestartHelperAge OBJECT-TYPE
+        SYNTAX       Ospfv3UpToRefreshIntervalTC
+        UNITS        "seconds"
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "Remaining time in current OSPF graceful restart
+           interval, if the router is acting as a restart
+           helper for the neighbor."
+        ::= { ospfv3NbrEntry 14 }
+
+ ospfv3NbrRestartHelperExitReason OBJECT-TYPE
+        SYNTAX       INTEGER { none(1),
+                               inProgress(2),
+                               completed(3),
+                               timedOut(4),
+                               topologyChanged(5)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+           "Describes the outcome of the last attempt at acting
+           as a graceful restart helper for the neighbor.
+
+           none:            no restart has yet been attempted.
+           inProgress:      a restart attempt is currently underway.
+           completed:       the last restart completed successfully.
+           timedOut:        the last restart timed out.
+           topologyChanged: the last restart was aborted due to
+                            a topology change."
+     ::= { ospfv3NbrEntry 15 }
+
+ -- OSPFv3 Configured Neighbor Table
+
+ ospfv3CfgNbrTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3CfgNbrEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A table describing all configured neighbors.
+
+             The Configured Neighbors table just gives
+             OSPFv3 information for sending OSPFv3 packets
+             to potential neighbors and is typically used
+             on NBMA and Point-to-Multipoint networks.
+             Once a Hello is received from a neighbor in
+             the Configured Neighbor table, an entry for
+             that neighbor is created in the Neighbor table
+             and adjacency state is maintained there.
+             Neighbors on multi-access or Point-to-Point
+             networks can use multicast addressing, so only
+             Neighbor table entries are created for them."
+         REFERENCE
+             "OSPF Version 2, Section 10, The Neighbor Data
+             Structure"
+         ::= { ospfv3Objects 10 }
+
+ ospfv3CfgNbrEntry OBJECT-TYPE
+         SYNTAX          Ospfv3CfgNbrEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The information regarding a single configured
+             neighbor.
+
+             The information in this table is persistent,
+             and when written, the entity SHOULD save the
+             change to non-volatile storage."
+         REFERENCE
+             "OSPF Version 2, Section 10, The Neighbor Data
+             Structure"
+         INDEX           { ospfv3CfgNbrIfIndex,
+                           ospfv3CfgNbrIfInstId,
+                           ospfv3CfgNbrAddressType,
+                           ospfv3CfgNbrAddress }
+         ::= { ospfv3CfgNbrTable 1 }
+
+ Ospfv3CfgNbrEntry ::= SEQUENCE {
+         ospfv3CfgNbrIfIndex
+                 InterfaceIndex,
+         ospfv3CfgNbrIfInstId
+                 Ospfv3IfInstIdTC,
+         ospfv3CfgNbrAddressType
+                 InetAddressType,
+         ospfv3CfgNbrAddress
+                 InetAddress,
+         ospfv3CfgNbrPriority
+                 DesignatedRouterPriority,
+         ospfv3CfgNbrRowStatus
+                 RowStatus
+         }
+
+ ospfv3CfgNbrIfIndex OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Local Link ID of the link over which the
+              neighbor can be reached."
+         ::= { ospfv3CfgNbrEntry 1 }
+
+ ospfv3CfgNbrIfInstId OBJECT-TYPE
+         SYNTAX          Ospfv3IfInstIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Interface instance over which the neighbor
+             can be reached.  This ID has local link
+             significance only."
+         ::= { ospfv3CfgNbrEntry 2 }
+
+ ospfv3CfgNbrAddressType OBJECT-TYPE
+         SYNTAX          InetAddressType
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The address type of ospfv3NbrAddress.  Only IPv6
+             addresses without zone index are expected."
+         ::= { ospfv3CfgNbrEntry 3 }
+
+ ospfv3CfgNbrAddress OBJECT-TYPE
+         SYNTAX          InetAddress
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The IPv6 address of the neighbor associated with
+             the local link."
+         ::= { ospfv3CfgNbrEntry 4 }
+
+ ospfv3CfgNbrPriority OBJECT-TYPE
+         SYNTAX          DesignatedRouterPriority
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "The priority of this neighbor in the designated-
+             router election algorithm.  The value 0 signifies
+             that the neighbor is not eligible to become the
+             Designated Router on this particular network."
+         DEFVAL          { 1 }
+         ::= { ospfv3CfgNbrEntry 5 }
+
+ ospfv3CfgNbrRowStatus OBJECT-TYPE
+         SYNTAX          RowStatus
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This object permits management of the table by
+             facilitating actions such as row creation,
+             construction, and destruction.
+
+             The value of this object has no effect on
+             whether other objects in this conceptual row can be
+             modified."
+         ::= { ospfv3CfgNbrEntry 6 }
+
+ -- OSPFv3 Virtual Neighbor Table
+
+ ospfv3VirtNbrTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3VirtNbrEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A table describing all virtual neighbors."
+         REFERENCE
+             "OSPF Version 2, Section 15, Virtual Links"
+         ::= { ospfv3Objects 11 }
+
+ ospfv3VirtNbrEntry OBJECT-TYPE
+         SYNTAX          Ospfv3VirtNbrEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "Virtual neighbor information."
+         INDEX           { ospfv3VirtNbrArea,
+                           ospfv3VirtNbrRtrId }
+         ::= { ospfv3VirtNbrTable 1 }
+
+ Ospfv3VirtNbrEntry ::= SEQUENCE {
+         ospfv3VirtNbrArea
+                 Ospfv3AreaIdTC,
+         ospfv3VirtNbrRtrId
+                 Ospfv3RouterIdTC,
+         ospfv3VirtNbrIfIndex
+                 InterfaceIndex,
+         ospfv3VirtNbrIfInstId
+                 Ospfv3IfInstIdTC,
+         ospfv3VirtNbrAddressType
+                 InetAddressType,
+         ospfv3VirtNbrAddress
+                 InetAddress,
+         ospfv3VirtNbrOptions
+                 Integer32,
+         ospfv3VirtNbrState
+                 INTEGER,
+         ospfv3VirtNbrEvents
+                 Counter32,
+         ospfv3VirtNbrLsRetransQLen
+                 Gauge32,
+         ospfv3VirtNbrHelloSuppressed
+                 TruthValue,
+         ospfv3VirtNbrIfId
+                 InterfaceIndex,
+         ospfv3VirtNbrRestartHelperStatus
+                 INTEGER,
+         ospfv3VirtNbrRestartHelperAge
+                 Ospfv3UpToRefreshIntervalTC,
+         ospfv3VirtNbrRestartHelperExitReason
+                 INTEGER
+         }
+
+ ospfv3VirtNbrArea OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The transit area Identifier."
+         ::= { ospfv3VirtNbrEntry 1 }
+
+ ospfv3VirtNbrRtrId OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A 32-bit integer uniquely identifying the
+             neighboring router in the Autonomous System."
+         ::= { ospfv3VirtNbrEntry 2 }
+
+ ospfv3VirtNbrIfIndex OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The local Interface ID for the virtual link over
+             which the neighbor can be reached."
+         ::= { ospfv3VirtNbrEntry 3 }
+
+ ospfv3VirtNbrIfInstId OBJECT-TYPE
+         SYNTAX          Ospfv3IfInstIdTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The interface instance for the virtual link over
+             which the neighbor can be reached."
+         ::= { ospfv3VirtNbrEntry 4 }
+
+ ospfv3VirtNbrAddressType OBJECT-TYPE
+         SYNTAX          InetAddressType
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The address type of ospfv3VirtNbrAddress.  Only IPv6
+             addresses without zone index are expected."
+         ::= { ospfv3VirtNbrEntry 5 }
+
+ ospfv3VirtNbrAddress OBJECT-TYPE
+         SYNTAX          InetAddress
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The IPv6 address advertised by this virtual neighbor.
+             It must be a global scope address."
+         ::= { ospfv3VirtNbrEntry 6 }
+
+ ospfv3VirtNbrOptions OBJECT-TYPE
+         SYNTAX          Integer32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "A bit mask corresponding to the neighbor's options
+             field."
+         REFERENCE
+             "OSPF for IPv6, Appendix A.2, The Options Field"
+         ::= { ospfv3VirtNbrEntry 7 }
+
+ ospfv3VirtNbrState OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         down(1),
+                         attempt(2),
+                         init(3),
+                         twoWay(4),
+                         exchangeStart(5),
+                         exchange(6),
+                         loading(7),
+                         full(8)
+                         }
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The state of the virtual neighbor relationship."
+         ::= { ospfv3VirtNbrEntry 8 }
+
+ ospfv3VirtNbrEvents OBJECT-TYPE
+         SYNTAX          Counter32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The number of times this virtual link has
+             changed its state or an error has occurred.
+
+             Discontinuities in the value of this counter
+             can occur at re-initialization of the management
+             system and at other times as indicated by the
+             value of ospfv3DiscontinuityTime."
+         ::= { ospfv3VirtNbrEntry 9 }
+
+ ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
+         SYNTAX          Gauge32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The current length of the retransmission
+             queue."
+         ::= { ospfv3VirtNbrEntry 10 }
+
+ ospfv3VirtNbrHelloSuppressed OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "Indicates whether Hellos are being suppressed
+             to the neighbor."
+         ::= { ospfv3VirtNbrEntry 11 }
+
+ ospfv3VirtNbrIfId OBJECT-TYPE
+         SYNTAX          InterfaceIndex
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The Interface ID that the neighbor advertises
+             in its Hello packets on this virtual link, that is,
+             the neighbor's local Interface ID."
+         ::= { ospfv3VirtNbrEntry 12 }
+
+ospfv3VirtNbrRestartHelperStatus OBJECT-TYPE
+        SYNTAX       INTEGER { notHelping(1),
+                               helping(2)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "Indicates whether the router is acting
+            as a graceful restart helper for the neighbor."
+           ::= { ospfv3VirtNbrEntry 13 }
+
+ ospfv3VirtNbrRestartHelperAge OBJECT-TYPE
+        SYNTAX       Ospfv3UpToRefreshIntervalTC
+        UNITS        "seconds"
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "Remaining time in the current OSPF graceful restart
+            interval, if the router is acting as a restart
+            helper for the neighbor."
+        ::= { ospfv3VirtNbrEntry 14 }
+
+ ospfv3VirtNbrRestartHelperExitReason OBJECT-TYPE
+        SYNTAX       INTEGER { none(1),
+                               inProgress(2),
+                               completed(3),
+                               timedOut(4),
+                               topologyChanged(5)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "Describes the outcome of the last attempt at acting
+            as a graceful restart helper for the neighbor.
+
+            none:            no restart has yet been attempted.
+            inProgress:      a restart attempt is currently underway.
+            completed:       the last restart completed successfully.
+            timedOut:        the last restart timed out.
+            topologyChanged: the last restart was aborted due to
+                             a topology change."
+     ::= { ospfv3VirtNbrEntry 15 }
+
+ --
+ -- The OSPFv3 Area Aggregate Table
+ --
+
+ ospfv3AreaAggregateTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3AreaAggregateEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Area Aggregate Table acts as an adjunct
+             to the Area Table.  It describes those address
+             aggregates that are configured to be propagated
+             from an area.  Its purpose is to reduce the amount
+             of information that is known beyond an area's
+             borders.
+
+             A range of IPv6 prefixes specified by a
+             prefix / prefix length pair.  Note that if
+             ranges are configured such that one range
+             subsumes another range, the most specific
+             match is the preferred one."
+         ::= { ospfv3Objects 12 }
+
+ ospfv3AreaAggregateEntry OBJECT-TYPE
+         SYNTAX          Ospfv3AreaAggregateEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A single area aggregate entry.
+
+             Information in this table is persistent, and
+             when this object is written, the entity SHOULD
+             save the change to non-volatile storage."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         INDEX           { ospfv3AreaAggregateAreaID,
+                           ospfv3AreaAggregateAreaLsdbType,
+                           ospfv3AreaAggregatePrefixType,
+                           ospfv3AreaAggregatePrefix,
+                           ospfv3AreaAggregatePrefixLength }
+         ::= { ospfv3AreaAggregateTable 1 }
+
+ Ospfv3AreaAggregateEntry ::= SEQUENCE {
+         ospfv3AreaAggregateAreaID
+                 Ospfv3AreaIdTC,
+         ospfv3AreaAggregateAreaLsdbType
+                 INTEGER,
+         ospfv3AreaAggregatePrefixType
+                 InetAddressType,
+         ospfv3AreaAggregatePrefix
+                 InetAddress,
+         ospfv3AreaAggregatePrefixLength
+                 InetAddressPrefixLength,
+         ospfv3AreaAggregateRowStatus
+                 RowStatus,
+         ospfv3AreaAggregateEffect
+                 INTEGER,
+         ospfv3AreaAggregateRouteTag
+                 Unsigned32
+         }
+
+ ospfv3AreaAggregateAreaID OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The area the Address Aggregate is to be found
+             within."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         ::= { ospfv3AreaAggregateEntry 1 }
+
+ ospfv3AreaAggregateAreaLsdbType OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         interAreaPrefixLsa(8195), -- 0x2003
+                         nssaExternalLsa(8199)     -- 0x2007
+                         }
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The type of the Address Aggregate.  This field
+             specifies the Area LSDB type that this Address
+             Aggregate applies to."
+         REFERENCE
+             "OSPF Version 2, Appendix A.4.1, The LSA header"
+         ::= { ospfv3AreaAggregateEntry 2 }
+
+ ospfv3AreaAggregatePrefixType OBJECT-TYPE
+         SYNTAX          InetAddressType
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The prefix type of ospfv3AreaAggregatePrefix.  Only
+             IPv6 addresses are expected."
+         ::= { ospfv3AreaAggregateEntry 3 }
+
+ ospfv3AreaAggregatePrefix OBJECT-TYPE
+         SYNTAX          InetAddress (SIZE (0..16))
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The IPv6 prefix."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         ::= { ospfv3AreaAggregateEntry 4 }
+
+ ospfv3AreaAggregatePrefixLength OBJECT-TYPE
+         SYNTAX          InetAddressPrefixLength (3..128)
+         UNITS           "bits"
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The length of the prefix (in bits).  A prefix can
+             not be shorter than 3 bits."
+         REFERENCE
+             "OSPF Version 2, Appendix C.2, Area parameters"
+         ::= { ospfv3AreaAggregateEntry 5 }
+
+ ospfv3AreaAggregateRowStatus OBJECT-TYPE
+         SYNTAX          RowStatus
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This object permits management of the table by
+             facilitating actions such as row creation,
+             construction, and destruction.
+
+             The value of this object has no effect on
+             whether other objects in this conceptual row can be
+             modified."
+         ::= { ospfv3AreaAggregateEntry 6 }
+
+ ospfv3AreaAggregateEffect OBJECT-TYPE
+         SYNTAX          INTEGER {
+                         advertiseMatching(1),
+                         doNotAdvertiseMatching(2)
+                         }
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "Prefixes subsumed by ranges will either trigger the
+             advertisement of the indicated aggregate
+             (advertiseMatching) or result in the prefix not
+             being advertised at all outside the area."
+         DEFVAL          { advertiseMatching }
+         ::= { ospfv3AreaAggregateEntry 7 }
+
+ ospfv3AreaAggregateRouteTag OBJECT-TYPE
+         SYNTAX          Unsigned32
+         MAX-ACCESS      read-create
+         STATUS          current
+         DESCRIPTION
+             "This tag is advertised only in the summarized
+             As-External LSA when summarizing from NSSA-LSAs to
+             AS-External-LSAs."
+         DEFVAL         { 0 }
+         ::= { ospfv3AreaAggregateEntry 8 }
+
+ -- OSPFv3 Link-Scope Link State Database, for virtual interfaces
+
+ ospfv3VirtLinkLsdbTable OBJECT-TYPE
+         SYNTAX          SEQUENCE OF Ospfv3VirtLinkLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The OSPFv3 Process's Link-scope LSDB for virtual
+             interfaces.  The LSDB contains the Link-scope link
+             state advertisements from virtual interfaces."
+         ::= { ospfv3Objects 13 }
+
+ ospfv3VirtLinkLsdbEntry OBJECT-TYPE
+         SYNTAX          Ospfv3VirtLinkLsdbEntry
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "A single Link-scope link state advertisement
+             for a virtual interface."
+         INDEX           { ospfv3VirtLinkLsdbIfAreaId,
+                           ospfv3VirtLinkLsdbIfNeighbor,
+                           ospfv3VirtLinkLsdbType,
+                           ospfv3VirtLinkLsdbRouterId,
+                           ospfv3VirtLinkLsdbLsid }
+         ::= { ospfv3VirtLinkLsdbTable 1 }
+
+ Ospfv3VirtLinkLsdbEntry ::= SEQUENCE {
+         ospfv3VirtLinkLsdbIfAreaId
+                 Ospfv3AreaIdTC,
+         ospfv3VirtLinkLsdbIfNeighbor
+                 Ospfv3RouterIdTC,
+         ospfv3VirtLinkLsdbType
+                 Unsigned32,
+         ospfv3VirtLinkLsdbRouterId
+                 Ospfv3RouterIdTC,
+         ospfv3VirtLinkLsdbLsid
+                 Ospfv3LsIdTC,
+         ospfv3VirtLinkLsdbSequence
+                 Ospfv3LsaSequenceTC,
+         ospfv3VirtLinkLsdbAge
+                 Ospfv3LsaAgeTC,
+         ospfv3VirtLinkLsdbChecksum
+                 Integer32,
+         ospfv3VirtLinkLsdbAdvertisement
+                 OCTET STRING,
+         ospfv3VirtLinkLsdbTypeKnown
+                 TruthValue
+         }
+
+ ospfv3VirtLinkLsdbIfAreaId OBJECT-TYPE
+         SYNTAX          Ospfv3AreaIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The transit area that the virtual link
+             traverses.  By definition, this is not
+             Area 0."
+         ::= { ospfv3VirtLinkLsdbEntry 1 }
+
+ ospfv3VirtLinkLsdbIfNeighbor OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The Router ID of the virtual neighbor."
+         ::= { ospfv3VirtLinkLsdbEntry 2 }
+
+ ospfv3VirtLinkLsdbType OBJECT-TYPE
+         SYNTAX          Unsigned32(0..'FFFFFFFF'h)
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The type of the link state advertisement.
+             Each link state type has a separate
+             advertisement format.  Link-scope LSAs unrecognized
+             by the router are also stored in this database."
+         ::= { ospfv3VirtLinkLsdbEntry 3 }
+
+ ospfv3VirtLinkLsdbRouterId OBJECT-TYPE
+         SYNTAX          Ospfv3RouterIdTC
+         MAX-ACCESS      not-accessible
+         STATUS          current
+         DESCRIPTION
+             "The 32-bit number that uniquely identifies the
+             originating router in the Autonomous System."
+         REFERENCE
+             "OSPF Version 2, Appendix C.1, Global parameters"
+         ::= { ospfv3VirtLinkLsdbEntry 4 }
+
+ ospfv3VirtLinkLsdbLsid OBJECT-TYPE
+         SYNTAX        Ospfv3LsIdTC
+         MAX-ACCESS    not-accessible
+         STATUS        current
+         DESCRIPTION
+             "The Link State ID is an LS type-specific field
+             containing a unique identifier;
+             it identifies the piece of the routing domain
+             that is being described by the advertisement.
+             In contrast to OSPFv2, the LSID has no
+             addressing semantics."
+         ::= { ospfv3VirtLinkLsdbEntry 5 }
+
+ -- Note that the OSPF sequence number is a 32-bit signed
+ -- integer.  It starts with the value '80000001'h
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+ -- Thus, a typical sequence number will be very negative.
+
+ ospfv3VirtLinkLsdbSequence OBJECT-TYPE
+         SYNTAX          Ospfv3LsaSequenceTC
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The sequence number field is a signed 32-bit
+             integer.  It is used to detect old and duplicate
+             link state advertisements.  The space of
+             sequence numbers is linearly ordered.  The
+             larger the sequence number, the more recent the
+             advertisement."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.6, LS sequence
+             number"
+         ::= { ospfv3VirtLinkLsdbEntry 6 }
+
+ ospfv3VirtLinkLsdbAge OBJECT-TYPE
+         SYNTAX          Ospfv3LsaAgeTC
+         UNITS           "seconds"
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the age of the link state
+             advertisement in seconds.  The high-order bit
+             of the LS age field is considered the DoNotAge
+             bit for support of on-demand circuits."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.1, LS age;
+              Extending OSPF to Support Demand Circuits,
+              Section 2.2, The LS age field."
+         ::= { ospfv3VirtLinkLsdbEntry 7 }
+
+ ospfv3VirtLinkLsdbChecksum OBJECT-TYPE
+         SYNTAX          Integer32
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "This field is the checksum of the complete
+             contents of the advertisement, excepting the
+             age field.  The age field is excepted so that
+             an advertisement's age can be incremented
+             without updating the checksum.  The checksum
+             used is the same that is used for ISO
+             connectionless datagrams; it is commonly
+             referred to as the Fletcher checksum."
+         REFERENCE
+             "OSPF Version 2, Section 12.1.7, LS checksum"
+         ::= { ospfv3VirtLinkLsdbEntry 8 }
+
+ ospfv3VirtLinkLsdbAdvertisement OBJECT-TYPE
+         SYNTAX          OCTET STRING (SIZE (1..65535))
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The entire link state advertisement, including
+             its header."
+         ::= { ospfv3VirtLinkLsdbEntry 9 }
+
+ ospfv3VirtLinkLsdbTypeKnown OBJECT-TYPE
+         SYNTAX          TruthValue
+         MAX-ACCESS      read-only
+         STATUS          current
+         DESCRIPTION
+             "The value true (1) indicates that the LSA type is
+             recognized by this router."
+         ::= { ospfv3VirtLinkLsdbEntry 10 }
+
+ -- The Ospfv3 Notification Table
+
+ -- The Ospfv3 Notification Table records fields that are
+ -- required for notifications.
+
+ ospfv3NotificationEntry OBJECT IDENTIFIER
+         ::= { ospfv3Objects 14 }
+
+ ospfv3ConfigErrorType OBJECT-TYPE
+     SYNTAX       INTEGER {
+                     badVersion(1),
+                     areaMismatch(2),
+                     unknownNbmaNbr(3), -- Router is DR eligible
+                     unknownVirtualNbr(4),
+                     helloIntervalMismatch(5),
+                     deadIntervalMismatch(6),
+                     optionMismatch(7),
+                     mtuMismatch(8),
+                     duplicateRouterId(9),
+                     noError(10) }
+     MAX-ACCESS   accessible-for-notify
+     STATUS   current
+     DESCRIPTION
+         "Potential types of configuration conflicts.
+         Used by the ospfv3ConfigError and
+         ospfv3ConfigVirtError notifications."
+     ::= { ospfv3NotificationEntry 1 }
+
+ ospfv3PacketType OBJECT-TYPE
+     SYNTAX       INTEGER {
+                     hello(1),
+                     dbDescript(2),
+                     lsReq(3),
+                     lsUpdate(4),
+                     lsAck(5),
+                     nullPacket(6) }
+     MAX-ACCESS   accessible-for-notify
+     STATUS       current
+     DESCRIPTION
+         "OSPFv3 packet types."
+     ::= { ospfv3NotificationEntry 2 }
+
+ ospfv3PacketSrc  OBJECT-TYPE
+     SYNTAX       InetAddressIPv6
+     MAX-ACCESS   accessible-for-notify
+     STATUS       current
+     DESCRIPTION
+         "The IPv6 address of an inbound packet that cannot
+         be identified by a neighbor instance.
+
+         Only IPv6 addresses without zone index are expected."
+     ::= { ospfv3NotificationEntry 3 }
+
+ -- Notification Definitions
+
+ -- The notifications need to be throttled so as to not overwhelm the
+ -- management agent in case of rapid changes to the OSPFv3 module.
+
+ospfv3VirtIfStateChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId,  -- The originator of the notification
+               ospfv3VirtIfState  -- The new state
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3VirtIfStateChange notification signifies that
+         there has been a change in the state of an OSPFv3 virtual
+         interface.
+
+         This notification should be generated when the interface
+         state regresses (e.g., goes from Point-to-Point to Down)
+         or progresses to a terminal state (i.e., Point-to-Point)."
+     ::= { ospfv3Notifications 1 }
+
+ospfv3NbrStateChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+               ospfv3NbrState  -- The new state
+
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3NbrStateChange notification signifies that
+         there has been a change in the state of a
+         non-virtual OSPFv3 neighbor.  This notification should be
+         generated when the neighbor state regresses
+         (e.g., goes from Attempt or Full to 1-Way or
+         Down) or progresses to a terminal state (e.g.,
+         2-Way or Full).  When a neighbor transitions
+         from or to Full on non-broadcast multi-access
+         and broadcast networks, the notification should be
+         generated by the Designated Router.  A Designated
+         Router transitioning to Down will be noted by
+         ospfIfStateChange."
+     ::= { ospfv3Notifications 2 }
+
+ospfv3VirtNbrStateChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+               ospfv3VirtNbrState  -- The new state
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3VirtNbrStateChange notification signifies
+         that there has been a change in the state of an OSPFv3
+         virtual neighbor.  This notification should be generated
+         when the neighbor state regresses (e.g., goes
+         from Attempt or Full to 1-Way or Down) or
+         progresses to a terminal state (e.g., Full)."
+     ::= { ospfv3Notifications 3 }
+
+ospfv3IfConfigError NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3IfState,         -- State of the interface
+        ospfv3PacketSrc,       -- IPv6 address of source
+        ospfv3ConfigErrorType, -- Type of error
+        ospfv3PacketType       -- Type of packet
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3IfConfigError notification signifies that a
+         packet has been received on a non-virtual
+         interface from a router whose configuration
+         parameters conflict with this router's
+         configuration parameters.  Note that the event
+         optionMismatch should cause a notification only if it
+         prevents an adjacency from forming."
+     ::= { ospfv3Notifications 4 }
+
+ospfv3VirtIfConfigError NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3VirtIfState,     -- State of the interface
+        ospfv3ConfigErrorType, -- Type of error
+        ospfv3PacketType
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3VirtIfConfigError notification signifies that a
+         packet has been received on a virtual interface
+         from a router whose configuration parameters
+         conflict with this router's configuration
+         parameters.  Note that the event optionMismatch
+         should cause a notification only if it prevents an
+         adjacency from forming."
+     ::= { ospfv3Notifications 5 }
+
+ospfv3IfRxBadPacket NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3IfState,         -- State of the interface
+        ospfv3PacketSrc,       -- The source IPv6 address
+        ospfv3PacketType       -- Type of packet
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3IfRxBadPacket notification signifies that an
+         OSPFv3 packet that cannot be parsed has been received on a
+         non-virtual interface."
+     ::= { ospfv3Notifications 6 }
+
+ospfv3VirtIfRxBadPacket NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+       ospfv3VirtIfState,      -- State of the interface
+       ospfv3PacketType        -- Type of packet
+       }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3VirtIfRxBadPacket notification signifies
+         that an OSPFv3 packet that cannot be parsed has been
+         received on a virtual interface."
+     ::= { ospfv3Notifications 7 }
+
+ospfv3LsdbOverflow NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3ExtAreaLsdbLimit -- Limit on External LSAs
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3LsdbOverflow notification signifies that the
+         number of LSAs in the router's link state
+         database has exceeded ospfv3ExtAreaLsdbLimit."
+     ::= { ospfv3Notifications 8 }
+
+ospfv3LsdbApproachingOverflow NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3ExtAreaLsdbLimit
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3LsdbApproachingOverflow notification signifies
+         that the number of LSAs in the router's
+         link state database has exceeded ninety percent of
+         ospfv3ExtAreaLsdbLimit."
+     ::= { ospfv3Notifications 9 }
+
+ospfv3IfStateChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3IfState   -- The new state
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3IfStateChange notification signifies that there
+         has been a change in the state of a non-virtual
+         OSPFv3 interface.  This notification should be generated
+         when the interface state regresses (e.g., goes
+         from DR to Down) or progresses to a terminal
+         state (i.e., Point-to-Point, DR Other, DR, or
+         Backup)."
+     ::= { ospfv3Notifications 10 }
+
+ospfv3NssaTranslatorStatusChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+        ospfv3AreaNssaTranslatorState  -- new state
+        }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3NssaTranslatorStatusChange notification
+         indicates that there has been a change in the router's
+         ability to translate OSPFv3 NSSA LSAs into OSPFv3 External
+         LSAs.  This notification should be generated when the
+         Translator Status transitions from or to any defined
+         status on a per-area basis."
+     ::= { ospfv3Notifications 11 }
+
+ospfv3RestartStatusChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+               ospfv3RestartStatus,  -- new status
+               ospfv3RestartInterval,
+               ospfv3RestartExitReason
+             }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3RestartStatusChange notification signifies that
+         there has been a change in the graceful restart
+         state for the router.  This notification should be
+         generated when the router restart status
+         changes."
+     ::= { ospfv3Notifications 12 }
+
+ospfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+               ospfv3NbrRestartHelperStatus,  -- new status
+               ospfv3NbrRestartHelperAge,
+               ospfv3NbrRestartHelperExitReason
+             }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3NbrRestartHelperStatusChange notification
+         signifies that there has been a change in the
+         graceful restart helper state for the neighbor.
+         This notification should be generated when the
+         neighbor restart helper status transitions for a neighbor."
+     ::= { ospfv3Notifications 13 }
+
+ospfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
+     OBJECTS { ospfv3RouterId, -- The originator of the notification
+               ospfv3VirtNbrRestartHelperStatus,  -- new status
+               ospfv3VirtNbrRestartHelperAge,
+               ospfv3VirtNbrRestartHelperExitReason
+             }
+     STATUS       current
+     DESCRIPTION
+         "An ospfv3VirtNbrRestartHelperStatusChange
+         notification signifies that there has been a
+         change in the graceful restart helper state for
+         the virtual neighbor.  This notification should be
+         generated when the virtual neighbor restart helper status
+         transitions for a virtual neighbor."
+     ::= { ospfv3Notifications 14 }
+
+ -- Conformance Information
+
+ ospfv3Groups      OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
+ ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
+
+ -- Compliance Statements
+
+ ospfv3FullCompliance MODULE-COMPLIANCE
+         STATUS          current
+         DESCRIPTION     "The compliance statement"
+         MODULE          -- this module
+         MANDATORY-GROUPS {
+                         ospfv3BasicGroup,
+                         ospfv3AreaGroup,
+                         ospfv3IfGroup,
+                         ospfv3VirtIfGroup,
+                         ospfv3NbrGroup,
+                         ospfv3CfgNbrGroup,
+                         ospfv3VirtNbrGroup,
+                         ospfv3AreaAggregateGroup
+                         }
+
+         GROUP           ospfv3AsLsdbGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             display their AS-scope link state database."
+
+         GROUP           ospfv3AreaLsdbGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             display their Area-scope link state database."
+
+         GROUP           ospfv3LinkLsdbGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             display their Link-scope link state database
+             for non-virtual interfaces."
+
+         GROUP           ospfv3VirtLinkLsdbGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             display their Link-scope link state database
+             for virtual interfaces."
+
+         GROUP           ospfv3HostGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             support attached hosts."
+
+         GROUP           ospfv3NotificationObjectGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             support OSPFv3 notifications."
+
+         GROUP           ospfv3NotificationGroup
+         DESCRIPTION
+             "This group is required for OSPFv3 systems that
+             support OSPFv3 notifications."
+
+         OBJECT          ospfv3NbrAddressType
+         SYNTAX          InetAddressType { ipv6(2) }
+         DESCRIPTION
+             "An implementation is only required to support IPv6
+             address without zone index."
+
+         OBJECT          ospfv3NbrAddress
+         SYNTAX          InetAddress (SIZE (16))
+         DESCRIPTION
+             "An implementation is only required to support IPv6
+             address without zone index."
+
+         OBJECT          ospfv3VirtNbrAddressType
+         SYNTAX          InetAddressType { ipv6(2) }
+         DESCRIPTION
+             "An implementation is only required to support IPv6
+             address without zone index."
+
+         OBJECT          ospfv3VirtNbrAddress
+         SYNTAX          InetAddress (SIZE (16))
+         DESCRIPTION
+             "An implementation is only required to support IPv6
+             address without zone index."
+         ::= { ospfv3Compliances 1 }
+
+    ospfv3ReadOnlyCompliance MODULE-COMPLIANCE
+       STATUS     current
+       DESCRIPTION
+               "When this MIB module is implemented without
+               support for read-create (i.e., in read-only
+               mode), the implementation can claim read-only
+               compliance.  Such a device can then be monitored,
+               but cannot be configured with this MIB."
+
+       MODULE -- this module
+            MANDATORY-GROUPS {
+                    ospfv3BasicGroup,
+                    ospfv3AreaGroup,
+                    ospfv3IfGroup,
+                    ospfv3VirtIfGroup,
+                    ospfv3NbrGroup,
+                    ospfv3CfgNbrGroup,
+                    ospfv3VirtNbrGroup,
+                    ospfv3AreaAggregateGroup
+                    }
+
+       GROUP           ospfv3AsLsdbGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           display their AS-scope link state database."
+
+       GROUP           ospfv3AreaLsdbGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           display their Area-scope link state database."
+
+       GROUP           ospfv3LinkLsdbGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           display their Link-scope link state database
+           for non-virtual interfaces."
+
+       GROUP           ospfv3VirtLinkLsdbGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           display their Link-scope link state database
+           for virtual interfaces."
+
+       GROUP           ospfv3HostGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           support attached hosts."
+
+       GROUP           ospfv3NotificationObjectGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           support OSPFv3 notifications."
+
+       GROUP           ospfv3NotificationGroup
+       DESCRIPTION
+           "This group is required for OSPFv3 systems that
+           support OSPFv3 notifications."
+
+       OBJECT ospfv3RouterId
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AdminStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3ExtAreaLsdbLimit
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3ExitOverflowInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3DemandExtensions
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3ReferenceBandwidth
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3RestartSupport
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3RestartInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3RestartStrictLsaChecking
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3NotificationEnable
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3StubRouterAdvertisement
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaImportAsExtern
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaSummary
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaRowStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaStubMetric
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaNssaTranslatorRole
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaNssaTranslatorStabInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaStubMetricType
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaTEEnabled
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3HostMetric
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3HostRowStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3HostAreaID
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfAreaId
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfType
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfAdminStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfRtrPriority
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfTransitDelay
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfRetransInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfHelloInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfRtrDeadInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfPollInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfRowStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfDemand
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfMetricValue
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfDemandNbrProbe
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfDemandNbrProbeRetransLimit
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfDemandNbrProbeInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfTEDisabled
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3IfLinkLSASuppression
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3VirtIfTransitDelay
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3VirtIfRetransInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3VirtIfHelloInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3VirtIfRtrDeadInterval
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3VirtIfRowStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3CfgNbrPriority
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3CfgNbrRowStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaAggregateRowStatus
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaAggregateEffect
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+
+       OBJECT ospfv3AreaAggregateRouteTag
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Write access is not required."
+    ::= { ospfv3Compliances 2 }
+
+ -- units of conformance
+
+ ospfv3BasicGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3RouterId,
+                         ospfv3AdminStatus,
+                         ospfv3VersionNumber,
+                         ospfv3AreaBdrRtrStatus,
+                         ospfv3ASBdrRtrStatus,
+                         ospfv3AsScopeLsaCount,
+                         ospfv3AsScopeLsaCksumSum,
+                         ospfv3OriginateNewLsas,
+                         ospfv3RxNewLsas,
+                         ospfv3ExtLsaCount,
+                         ospfv3ExtAreaLsdbLimit,
+                         ospfv3ExitOverflowInterval,
+                         ospfv3DemandExtensions,
+                         ospfv3ReferenceBandwidth,
+                         ospfv3RestartSupport,
+                         ospfv3RestartInterval,
+                         ospfv3RestartStrictLsaChecking,
+                         ospfv3RestartStatus,
+                         ospfv3RestartAge,
+                         ospfv3RestartExitReason,
+                         ospfv3NotificationEnable,
+                         ospfv3StubRouterSupport,
+                         ospfv3StubRouterAdvertisement,
+                         ospfv3DiscontinuityTime,
+                         ospfv3RestartTime
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for managing/monitoring
+             OSPFv3 global parameters."
+         ::= { ospfv3Groups 1 }
+
+ ospfv3AreaGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3AreaImportAsExtern,
+                         ospfv3AreaSpfRuns,
+                         ospfv3AreaBdrRtrCount,
+                         ospfv3AreaAsBdrRtrCount,
+                         ospfv3AreaScopeLsaCount,
+                         ospfv3AreaScopeLsaCksumSum,
+                         ospfv3AreaSummary,
+                         ospfv3AreaRowStatus,
+                         ospfv3AreaStubMetric,
+                         ospfv3AreaNssaTranslatorRole,
+                         ospfv3AreaNssaTranslatorState,
+                         ospfv3AreaNssaTranslatorStabInterval,
+                         ospfv3AreaNssaTranslatorEvents,
+                         ospfv3AreaStubMetricType,
+                         ospfv3AreaTEEnabled
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for OSPFv3 systems
+             supporting areas."
+         ::= { ospfv3Groups 2 }
+
+ ospfv3AsLsdbGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3AsLsdbSequence,
+                         ospfv3AsLsdbAge,
+                         ospfv3AsLsdbChecksum,
+                         ospfv3AsLsdbAdvertisement,
+                         ospfv3AsLsdbTypeKnown
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for OSPFv3 systems
+             that display their AS-scope link state database."
+         ::= { ospfv3Groups 3 }
+
+ ospfv3AreaLsdbGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3AreaLsdbSequence,
+                         ospfv3AreaLsdbAge,
+                         ospfv3AreaLsdbChecksum,
+                         ospfv3AreaLsdbAdvertisement,
+                         ospfv3AreaLsdbTypeKnown
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for OSPFv3 systems
+             that display their Area-scope link state database."
+         ::= { ospfv3Groups 4 }
+
+ ospfv3LinkLsdbGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3LinkLsdbSequence,
+                         ospfv3LinkLsdbAge,
+                         ospfv3LinkLsdbChecksum,
+                         ospfv3LinkLsdbAdvertisement,
+                         ospfv3LinkLsdbTypeKnown
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for OSPFv3 systems
+             that display their Link-scope link state database
+             for non-virtual interfaces."
+         ::= { ospfv3Groups 5 }
+
+ ospfv3HostGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3HostMetric,
+                         ospfv3HostRowStatus,
+                         ospfv3HostAreaID
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for OSPFv3 systems
+             that support attached hosts."
+         ::= { ospfv3Groups 6 }
+
+ ospfv3IfGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3IfAreaId,
+                         ospfv3IfType,
+                         ospfv3IfAdminStatus,
+                         ospfv3IfRtrPriority,
+                         ospfv3IfTransitDelay,
+                         ospfv3IfRetransInterval,
+                         ospfv3IfHelloInterval,
+                         ospfv3IfRtrDeadInterval,
+                         ospfv3IfPollInterval,
+                         ospfv3IfState,
+                         ospfv3IfDesignatedRouter,
+                         ospfv3IfBackupDesignatedRouter,
+                         ospfv3IfEvents,
+                         ospfv3IfRowStatus,
+                         ospfv3IfDemand,
+                         ospfv3IfMetricValue,
+                         ospfv3IfLinkScopeLsaCount,
+                         ospfv3IfLinkLsaCksumSum,
+                         ospfv3IfDemandNbrProbe,
+                         ospfv3IfDemandNbrProbeRetransLimit,
+                         ospfv3IfDemandNbrProbeInterval,
+                         ospfv3IfTEDisabled,
+                         ospfv3IfLinkLSASuppression
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These interface objects are used for
+             managing/monitoring OSPFv3 interfaces."
+         ::= { ospfv3Groups 7 }
+
+ ospfv3VirtIfGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3VirtIfIndex,
+                         ospfv3VirtIfInstId,
+                         ospfv3VirtIfTransitDelay,
+                         ospfv3VirtIfRetransInterval,
+                         ospfv3VirtIfHelloInterval,
+                         ospfv3VirtIfRtrDeadInterval,
+                         ospfv3VirtIfState,
+                         ospfv3VirtIfEvents,
+                         ospfv3VirtIfRowStatus,
+                         ospfv3VirtIfLinkScopeLsaCount,
+                         ospfv3VirtIfLinkLsaCksumSum
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These virtual interface objects are used for
+             managing/monitoring OSPFv3 virtual interfaces."
+         ::= { ospfv3Groups 8 }
+
+ ospfv3NbrGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3NbrAddressType,
+                         ospfv3NbrAddress,
+                         ospfv3NbrOptions,
+                         ospfv3NbrPriority,
+                         ospfv3NbrState,
+                         ospfv3NbrEvents,
+                         ospfv3NbrLsRetransQLen,
+                         ospfv3NbrHelloSuppressed,
+                         ospfv3NbrIfId,
+                         ospfv3NbrRestartHelperStatus,
+                         ospfv3NbrRestartHelperAge,
+                         ospfv3NbrRestartHelperExitReason
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These neighbor objects are used for
+             managing/monitoring OSPFv3 neighbors."
+         ::= { ospfv3Groups 9 }
+
+ ospfv3CfgNbrGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3CfgNbrPriority,
+                         ospfv3CfgNbrRowStatus
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These configured neighbor objects are used for
+             managing/monitoring OSPFv3-configured neighbors."
+         ::= { ospfv3Groups 10 }
+
+ ospfv3VirtNbrGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3VirtNbrIfIndex,
+                         ospfv3VirtNbrIfInstId,
+                         ospfv3VirtNbrAddressType,
+                         ospfv3VirtNbrAddress,
+                         ospfv3VirtNbrOptions,
+                         ospfv3VirtNbrState,
+                         ospfv3VirtNbrEvents,
+                         ospfv3VirtNbrLsRetransQLen,
+                         ospfv3VirtNbrHelloSuppressed,
+                         ospfv3VirtNbrIfId,
+                         ospfv3VirtNbrRestartHelperStatus,
+                         ospfv3VirtNbrRestartHelperAge,
+                         ospfv3VirtNbrRestartHelperExitReason
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These virtual neighbor objects are used for
+             managing/monitoring OSPFv3 virtual neighbors."
+         ::= { ospfv3Groups 11 }
+
+ ospfv3AreaAggregateGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3AreaAggregateRowStatus,
+                         ospfv3AreaAggregateEffect,
+                         ospfv3AreaAggregateRouteTag
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These area aggregate objects are required for
+             aggregating OSPFv3 prefixes for summarization
+             across areas."
+         ::= { ospfv3Groups 12 }
+
+ ospfv3VirtLinkLsdbGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3VirtLinkLsdbSequence,
+                         ospfv3VirtLinkLsdbAge,
+                         ospfv3VirtLinkLsdbChecksum,
+                         ospfv3VirtLinkLsdbAdvertisement,
+                         ospfv3VirtLinkLsdbTypeKnown
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used for OSPFv3 systems
+             that display their Link-scope link state database
+             for virtual interfaces."
+         ::= { ospfv3Groups 13 }
+
+ ospfv3NotificationObjectGroup OBJECT-GROUP
+         OBJECTS         {
+                         ospfv3ConfigErrorType,
+                         ospfv3PacketType,
+                         ospfv3PacketSrc
+                         }
+         STATUS          current
+         DESCRIPTION
+             "These objects are used to record notification
+             parameters."
+         ::= { ospfv3Groups 14 }
+
+ ospfv3NotificationGroup NOTIFICATION-GROUP
+         NOTIFICATIONS   {
+                         ospfv3VirtIfStateChange,
+                         ospfv3NbrStateChange,
+                         ospfv3VirtNbrStateChange,
+                         ospfv3IfConfigError,
+                         ospfv3VirtIfConfigError,
+                         ospfv3IfRxBadPacket,
+                         ospfv3VirtIfRxBadPacket,
+                         ospfv3LsdbOverflow,
+                         ospfv3LsdbApproachingOverflow,
+                         ospfv3IfStateChange,
+                         ospfv3NssaTranslatorStatusChange,
+                         ospfv3RestartStatusChange,
+                         ospfv3NbrRestartHelperStatusChange,
+                         ospfv3VirtNbrRestartHelperStatusChange
+                         }
+         STATUS          current
+         DESCRIPTION
+             "This group is used for OSPFv3 notifications."
+         ::= { ospfv3Groups 15 }
+
+ END
diff --git a/snmp_builder/mibs/P-BRIDGE-MIB.mib b/snmp_builder/mibs/P-BRIDGE-MIB.mib
new file mode 100644
index 0000000..77dd4d8
--- /dev/null
+++ b/snmp_builder/mibs/P-BRIDGE-MIB.mib
@@ -0,0 +1,1157 @@
+P-BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+-- -------------------------------------------------------------
+-- MIB for IEEE 802.1p devices
+-- -------------------------------------------------------------
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, Counter64
+        FROM SNMPv2-SMI
+    TruthValue, TimeInterval, MacAddress, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    dot1dTp, dot1dTpPort, dot1dBridge,
+    dot1dBasePortEntry, dot1dBasePort
+        FROM BRIDGE-MIB;
+
+pBridgeMIB MODULE-IDENTITY
+    LAST-UPDATED "200601090000Z"
+    ORGANIZATION "IETF Bridge MIB Working Group"
+    CONTACT-INFO
+        "Email:  bridge-mib@ietf.org
+                 ietfmibs@ops.ietf.org
+
+                 David Levi
+         Postal: Nortel Networks
+                 4655 Great America Parkway
+                 Santa Clara, CA 95054
+                 USA
+                 Phone: +1 865 686 0432
+                 Email: dlevi@nortel.com
+
+                 David Harrington
+         Postal: Effective Software
+                 50 Harding Rd.
+                 Portsmouth, NH 03801
+                 USA
+                 Phone: +1 603 436 8634
+                 Email: ietfdbh@comcast.net
+
+                 Les Bell
+         Postal: Hemel Hempstead, Herts. HP2 7YU
+                 UK
+          Email: elbell@ntlworld.com
+
+                 Vivian Ngai
+
+          Email: vivian_ngai@acm.org
+
+                 Andrew Smith
+         Postal: Beijing Harbour Networks
+                 Jiuling Building
+                 21 North Xisanhuan Ave.
+                 Beijing, 100089
+                 PRC
+            Fax: +1 415 345 1827
+          Email: ah_smith@acm.org
+
+                 Paul Langille
+         Postal: Newbridge Networks
+                 5 Corporate Drive
+                 Andover, MA 01810
+                 USA
+          Phone: +1 978 691 4665
+          Email: langille@newbridge.com
+
+                 Anil Rijhsinghani
+         Postal: Accton Technology Corporation
+                 5 Mount Royal Ave
+                 Marlboro, MA 01752
+                 USA
+          Phone:
+          Email: anil@accton.com
+
+                 Keith McCloghrie
+         Postal: Cisco Systems, Inc.
+                 170 West Tasman Drive
+                 San Jose, CA 95134-1706
+                 USA
+          Phone: +1 408 526 5260
+          Email: kzm@cisco.com"
+    DESCRIPTION
+        "The Bridge MIB Extension module for managing Priority
+        and Multicast Filtering, defined by IEEE 802.1D-1998,
+        including Restricted Group Registration defined by
+        IEEE 802.1t-2001.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4363; See the RFC itself for
+        full legal notices."
+    REVISION     "200601090000Z"
+    DESCRIPTION
+         "Added dot1dPortRestrictedGroupRegistration.
+          Deprecated pBridgePortGmrpGroup and pBridgeCompliance
+          and added pBridgePortGmrpGroup2 and pBridgeCompliance2."
+
+    REVISION     "199908250000Z"
+    DESCRIPTION
+         "The Bridge MIB Extension module for managing Priority
+          and Multicast Filtering, defined by IEEE 802.1D-1998.
+
+          Initial version, published as RFC 2674."
+    ::= { dot1dBridge 6 }
+
+pBridgeMIBObjects OBJECT IDENTIFIER ::= { pBridgeMIB 1 }
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+EnabledStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A simple status value for the object."
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+
+-- -------------------------------------------------------------
+-- subtrees in the P-BRIDGE MIB
+-- -------------------------------------------------------------
+
+dot1dExtBase    OBJECT IDENTIFIER ::= { pBridgeMIBObjects 1 }
+dot1dPriority   OBJECT IDENTIFIER ::= { pBridgeMIBObjects 2 }
+dot1dGarp       OBJECT IDENTIFIER ::= { pBridgeMIBObjects 3 }
+dot1dGmrp       OBJECT IDENTIFIER ::= { pBridgeMIBObjects 4 }
+
+-- -------------------------------------------------------------
+-- the dot1dExtBase subtree
+-- -------------------------------------------------------------
+
+dot1dDeviceCapabilities OBJECT-TYPE
+    SYNTAX      BITS {
+        dot1dExtendedFilteringServices(0),
+        dot1dTrafficClasses(1),
+        dot1qStaticEntryIndividualPort(2),
+        dot1qIVLCapable(3),
+        dot1qSVLCapable(4),
+        dot1qHybridCapable(5),
+        dot1qConfigurablePvidTagging(6),
+        dot1dLocalVlanCapable(7)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the optional parts of IEEE 802.1D and 802.1Q
+        that are implemented by this device and are manageable
+        through this MIB.  Capabilities that are allowed on a
+        per-port basis are indicated in dot1dPortCapabilities.
+
+        dot1dExtendedFilteringServices(0),
+                              -- can perform filtering of
+                              -- individual multicast addresses
+                              -- controlled by GMRP.
+        dot1dTrafficClasses(1),
+                              -- can map user priority to
+                              -- multiple traffic classes.
+        dot1qStaticEntryIndividualPort(2),
+                              -- dot1qStaticUnicastReceivePort &
+                              -- dot1qStaticMulticastReceivePort
+                              -- can represent non-zero entries.
+        dot1qIVLCapable(3),   -- Independent VLAN Learning (IVL).
+        dot1qSVLCapable(4),   -- Shared VLAN Learning (SVL).
+        dot1qHybridCapable(5),
+                              -- both IVL & SVL simultaneously.
+        dot1qConfigurablePvidTagging(6),
+                              -- whether the implementation
+                              -- supports the ability to
+                              -- override the default PVID
+                              -- setting and its egress status
+                              -- (VLAN-Tagged or Untagged) on
+                              -- each port.
+        dot1dLocalVlanCapable(7)
+                              -- can support multiple local
+                              -- bridges, outside of the scope
+                              -- of 802.1Q defined VLANs."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 5.2,
+        IEEE 802.1Q/D11 Section 5.2, 12.10.1.1.3/b/2"
+    ::= { dot1dExtBase 1 }
+
+dot1dTrafficClassesEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value true(1) indicates that Traffic Classes are
+        enabled on this bridge.  When false(2), the bridge
+        operates with a single priority level for all traffic.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { true }
+    ::= { dot1dExtBase 2 }
+
+dot1dGmrpStatus OBJECT-TYPE
+    SYNTAX      EnabledStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The administrative status requested by management for
+        GMRP.  The value enabled(1) indicates that GMRP should
+        be enabled on this device, in all VLANs, on all ports
+        for which it has not been specifically disabled.  When
+        disabled(2), GMRP is disabled, in all VLANs and on all
+        ports, and all GMRP packets will be forwarded
+        transparently.  This object affects both Applicant and
+        Registrar state machines.  A transition from disabled(2)
+        to enabled(1) will cause a reset of all GMRP state
+        machines on all ports.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { enabled }
+    ::= { dot1dExtBase 3 }
+
+-- -------------------------------------------------------------
+-- Port Capabilities Table
+-- -------------------------------------------------------------
+
+dot1dPortCapabilitiesTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dPortCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains capabilities information about
+        every port that is associated with this bridge."
+    ::= { dot1dExtBase 4 }
+
+dot1dPortCapabilitiesEntry OBJECT-TYPE
+    SYNTAX      Dot1dPortCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of capabilities information about this port
+        indexed by dot1dBasePort."
+    AUGMENTS { dot1dBasePortEntry }
+    ::= { dot1dPortCapabilitiesTable 1 }
+
+Dot1dPortCapabilitiesEntry ::=
+    SEQUENCE {
+
+        dot1dPortCapabilities
+            BITS
+    }
+
+dot1dPortCapabilities OBJECT-TYPE
+    SYNTAX      BITS {
+        dot1qDot1qTagging(0),
+        dot1qConfigurableAcceptableFrameTypes(1),
+        dot1qIngressFiltering(2)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the parts of IEEE 802.1D and 802.1Q that are
+        optional on a per-port basis, that are implemented by
+        this device, and that are manageable through this MIB.
+
+        dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of
+                              -- frames and GVRP.
+        dot1qConfigurableAcceptableFrameTypes(1),
+                              -- allows modified values of
+                              -- dot1qPortAcceptableFrameTypes.
+        dot1qIngressFiltering(2)
+                              -- supports the discarding of any
+                              -- frame received on a Port whose
+                              -- VLAN classification does not
+                              -- include that Port in its Member
+                              -- set."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 5.2,
+        IEEE 802.1Q/D11 Section 5.2"
+    ::= { dot1dPortCapabilitiesEntry 1 }
+
+-- -------------------------------------------------------------
+-- the dot1dPriority subtree
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- Port Priority Table
+-- -------------------------------------------------------------
+
+dot1dPortPriorityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dPortPriorityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about every port that
+        is associated with this transparent bridge."
+    ::= { dot1dPriority 1 }
+
+dot1dPortPriorityEntry OBJECT-TYPE
+    SYNTAX      Dot1dPortPriorityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of Default User Priorities for each port of a
+        transparent bridge.  This is indexed by dot1dBasePort."
+    AUGMENTS { dot1dBasePortEntry }
+    ::= { dot1dPortPriorityTable 1 }
+
+Dot1dPortPriorityEntry ::=
+    SEQUENCE {
+        dot1dPortDefaultUserPriority
+            Integer32,
+        dot1dPortNumTrafficClasses
+            Integer32
+    }
+
+dot1dPortDefaultUserPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The default ingress User Priority for this port.  This
+        only has effect on media, such as Ethernet, that do not
+        support native User Priority.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1dPortPriorityEntry 1 }
+
+dot1dPortNumTrafficClasses OBJECT-TYPE
+    SYNTAX      Integer32 (1..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The number of egress traffic classes supported on this
+        port.  This object may optionally be read-only.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1dPortPriorityEntry 2 }
+
+-- -------------------------------------------------------------
+-- User Priority Regeneration Table
+-- -------------------------------------------------------------
+
+dot1dUserPriorityRegenTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dUserPriorityRegenEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of Regenerated User Priorities for each received
+        User Priority on each port of a bridge.  The Regenerated
+        User Priority value may be used to index the Traffic
+        Class Table for each input port.  This only has effect
+        on media that support native User Priority.  The default
+        values for Regenerated User Priorities are the same as
+        the User Priorities."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 6.4"
+    ::= { dot1dPriority 2 }
+
+dot1dUserPriorityRegenEntry OBJECT-TYPE
+    SYNTAX      Dot1dUserPriorityRegenEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A mapping of incoming User Priority to a Regenerated
+        User Priority."
+    INDEX   { dot1dBasePort, dot1dUserPriority }
+    ::= { dot1dUserPriorityRegenTable 1 }
+
+Dot1dUserPriorityRegenEntry ::=
+    SEQUENCE {
+        dot1dUserPriority
+            Integer32,
+        dot1dRegenUserPriority
+            Integer32
+    }
+
+dot1dUserPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The User Priority for a frame received on this port."
+    ::= { dot1dUserPriorityRegenEntry 1 }
+
+dot1dRegenUserPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The Regenerated User Priority that the incoming User
+
+        Priority is mapped to for this port.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1dUserPriorityRegenEntry 2 }
+
+-- -------------------------------------------------------------
+-- Traffic Class Table
+-- -------------------------------------------------------------
+
+dot1dTrafficClassTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTrafficClassEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table mapping evaluated User Priority to Traffic
+        Class, for forwarding by the bridge.  Traffic class is a
+        number in the range (0..(dot1dPortNumTrafficClasses-1))."
+    REFERENCE
+        "ISO/IEC 15802-3 Table 7-2"
+    ::= { dot1dPriority 3 }
+
+dot1dTrafficClassEntry OBJECT-TYPE
+    SYNTAX      Dot1dTrafficClassEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "User Priority to Traffic Class mapping."
+    INDEX   { dot1dBasePort, dot1dTrafficClassPriority }
+    ::= { dot1dTrafficClassTable 1 }
+
+Dot1dTrafficClassEntry ::=
+    SEQUENCE {
+        dot1dTrafficClassPriority
+            Integer32,
+        dot1dTrafficClass
+            Integer32
+    }
+
+dot1dTrafficClassPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The Priority value determined for the received frame.
+        This value is equivalent to the priority indicated in
+        the tagged frame received, or one of the evaluated
+        priorities, determined according to the media-type.
+
+        For untagged frames received from Ethernet media, this
+        value is equal to the dot1dPortDefaultUserPriority value
+        for the ingress port.
+
+        For untagged frames received from non-Ethernet media,
+        this value is equal to the dot1dRegenUserPriority value
+        for the ingress port and media-specific user priority."
+    ::= { dot1dTrafficClassEntry 1 }
+
+dot1dTrafficClass OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The Traffic Class the received frame is mapped to.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1dTrafficClassEntry 2 }
+
+-- -------------------------------------------------------------
+-- Outbound Access Priority Table
+-- -------------------------------------------------------------
+
+dot1dPortOutboundAccessPriorityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dPortOutboundAccessPriorityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table mapping Regenerated User Priority to Outbound
+        Access Priority.  This is a fixed mapping for all port
+        types, with two options for 802.5 Token Ring."
+    REFERENCE
+        "ISO/IEC 15802-3 Table 7-3"
+    ::= { dot1dPriority 4 }
+
+dot1dPortOutboundAccessPriorityEntry OBJECT-TYPE
+    SYNTAX      Dot1dPortOutboundAccessPriorityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Regenerated User Priority to Outbound Access Priority
+        mapping."
+    INDEX   { dot1dBasePort, dot1dRegenUserPriority }
+    ::= { dot1dPortOutboundAccessPriorityTable 1 }
+
+Dot1dPortOutboundAccessPriorityEntry ::=
+    SEQUENCE {
+
+        dot1dPortOutboundAccessPriority
+            Integer32
+    }
+
+dot1dPortOutboundAccessPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Outbound Access Priority the received frame is
+        mapped to."
+    ::= { dot1dPortOutboundAccessPriorityEntry 1 }
+
+-- -------------------------------------------------------------
+-- the dot1dGarp subtree
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- The GARP Port Table
+-- -------------------------------------------------------------
+
+dot1dPortGarpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dPortGarpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of GARP control information about every bridge
+        port.  This is indexed by dot1dBasePort."
+    ::= { dot1dGarp 1 }
+
+dot1dPortGarpEntry OBJECT-TYPE
+    SYNTAX      Dot1dPortGarpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "GARP control information for a bridge port."
+    AUGMENTS { dot1dBasePortEntry }
+    ::= { dot1dPortGarpTable 1 }
+
+Dot1dPortGarpEntry ::=
+    SEQUENCE {
+        dot1dPortGarpJoinTime
+            TimeInterval,
+        dot1dPortGarpLeaveTime
+            TimeInterval,
+        dot1dPortGarpLeaveAllTime
+            TimeInterval
+    }
+
+dot1dPortGarpJoinTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The GARP Join time, in centiseconds.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { 20 }
+    ::= { dot1dPortGarpEntry 1 }
+
+dot1dPortGarpLeaveTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The GARP Leave time, in centiseconds.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { 60 }
+    ::= { dot1dPortGarpEntry 2 }
+
+dot1dPortGarpLeaveAllTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The GARP LeaveAll time, in centiseconds.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { 1000 }
+    ::= { dot1dPortGarpEntry 3 }
+
+-- -------------------------------------------------------------
+-- The GMRP Port Configuration and Status Table
+-- -------------------------------------------------------------
+
+dot1dPortGmrpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dPortGmrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of GMRP control and status information about
+        every bridge port.  Augments the dot1dBasePortTable."
+    ::= { dot1dGmrp 1 }
+
+dot1dPortGmrpEntry OBJECT-TYPE
+    SYNTAX      Dot1dPortGmrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "GMRP control and status information for a bridge port."
+    AUGMENTS { dot1dBasePortEntry }
+    ::= { dot1dPortGmrpTable 1 }
+
+Dot1dPortGmrpEntry ::=
+    SEQUENCE {
+        dot1dPortGmrpStatus
+            EnabledStatus,
+        dot1dPortGmrpFailedRegistrations
+            Counter32,
+        dot1dPortGmrpLastPduOrigin
+            MacAddress,
+        dot1dPortRestrictedGroupRegistration
+            TruthValue
+    }
+
+dot1dPortGmrpStatus OBJECT-TYPE
+    SYNTAX      EnabledStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The administrative state of GMRP operation on this port.  The
+        value enabled(1) indicates that GMRP is enabled on this port
+        in all VLANs as long as dot1dGmrpStatus is also enabled(1).
+        A value of disabled(2) indicates that GMRP is disabled on
+        this port in all VLANs: any GMRP packets received will
+        be silently discarded, and no GMRP registrations will be
+        propagated from other ports.  Setting this to a value of
+        enabled(1) will be stored by the agent but will only take
+        effect on the GMRP protocol operation if dot1dGmrpStatus
+        also indicates the value enabled(1).  This object affects
+        all GMRP Applicant and Registrar state machines on this
+        port.  A transition from disabled(2) to enabled(1) will
+        cause a reset of all GMRP state machines on this port.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { enabled }
+    ::= { dot1dPortGmrpEntry 1 }
+
+dot1dPortGmrpFailedRegistrations OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of failed GMRP registrations, for any
+        reason, in all VLANs, on this port."
+    ::= { dot1dPortGmrpEntry 2 }
+
+dot1dPortGmrpLastPduOrigin OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Source MAC Address of the last GMRP message
+        received on this port."
+    ::= { dot1dPortGmrpEntry 3 }
+
+dot1dPortRestrictedGroupRegistration OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The state of Restricted Group Registration on this port.
+         If the value of this control is true(1), then creation
+         of a new dynamic entry is permitted only if there is a
+         Static Filtering Entry for the VLAN concerned, in which
+         the Registrar Administrative Control value is Normal
+         Registration.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1t clause 10.3.2.3, 14.10.1.3."
+    DEFVAL      { false }
+    ::= { dot1dPortGmrpEntry 4 }
+
+-- -------------------------------------------------------------
+--  High-Capacity Port Table for Transparent Bridges
+-- -------------------------------------------------------------
+
+dot1dTpHCPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTpHCPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about every high-
+        capacity port that is associated with this transparent
+        bridge."
+    ::= { dot1dTp 5 }
+
+dot1dTpHCPortEntry OBJECT-TYPE
+    SYNTAX      Dot1dTpHCPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Statistics information for each high-capacity port of a
+        transparent bridge."
+    INDEX   { dot1dTpPort }
+    ::= { dot1dTpHCPortTable 1 }
+
+Dot1dTpHCPortEntry ::=
+    SEQUENCE {
+        dot1dTpHCPortInFrames
+            Counter64,
+        dot1dTpHCPortOutFrames
+            Counter64,
+        dot1dTpHCPortInDiscards
+            Counter64
+    }
+
+dot1dTpHCPortInFrames OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames that have been received by this
+        port from its segment.  Note that a frame received on
+        the interface corresponding to this port is only counted
+        by this object if and only if it is for a protocol being
+        processed by the local bridging function, including
+        bridge management frames."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1dTpHCPortEntry 1 }
+
+dot1dTpHCPortOutFrames OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames that have been transmitted by this
+        port to its segment.  Note that a frame transmitted on
+        the interface corresponding to this port is only counted
+        by this object if and only if it is for a protocol being
+        processed by the local bridging function, including
+        bridge management frames."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1dTpHCPortEntry 2 }
+
+dot1dTpHCPortInDiscards OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Count of valid frames that have been received by this
+        port from its segment that were discarded (i.e.,
+        filtered) by the Forwarding Process."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1dTpHCPortEntry 3 }
+
+-- ----------------------------------------------------
+--  Upper part of High-Capacity Port Table for Transparent Bridges
+-- ----------------------------------------------------
+
+dot1dTpPortOverflowTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTpPortOverflowEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains the most-significant bits of
+        statistics counters for ports that are associated with this
+        transparent bridge that are on high-capacity interfaces, as
+        defined in the conformance clauses for this table.  This table
+        is provided as a way to read 64-bit counters for agents that
+        support only SNMPv1.
+
+        Note that the reporting of most-significant and
+        least-significant counter bits separately runs the risk of
+        missing an overflow of the lower bits in the interval between
+        sampling.  The manager must be aware of this possibility, even
+        within the same varbindlist, when interpreting the results of
+        a request or asynchronous notification."
+    ::= { dot1dTp 6 }
+
+dot1dTpPortOverflowEntry OBJECT-TYPE
+    SYNTAX      Dot1dTpPortOverflowEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The most significant bits of statistics counters for a high-
+        capacity interface of a transparent bridge.  Each object is
+        associated with a corresponding object in dot1dTpPortTable
+        that indicates the least significant bits of the counter."
+    INDEX   { dot1dTpPort }
+    ::= { dot1dTpPortOverflowTable 1 }
+
+Dot1dTpPortOverflowEntry ::=
+    SEQUENCE {
+        dot1dTpPortInOverflowFrames
+            Counter32,
+        dot1dTpPortOutOverflowFrames
+            Counter32,
+        dot1dTpPortInOverflowDiscards
+            Counter32
+    }
+
+dot1dTpPortInOverflowFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated dot1dTpPortInFrames
+        counter has overflowed."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1dTpPortOverflowEntry 1 }
+
+dot1dTpPortOutOverflowFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated dot1dTpPortOutFrames
+        counter has overflowed."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1dTpPortOverflowEntry 2 }
+
+dot1dTpPortInOverflowDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        dot1dTpPortInDiscards counter has overflowed."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1dTpPortOverflowEntry 3 }
+
+-- -------------------------------------------------------------
+-- IEEE 802.1p MIB - Conformance Information
+-- -------------------------------------------------------------
+
+pBridgeConformance OBJECT IDENTIFIER ::= { pBridgeMIB 2 }
+
+pBridgeGroups OBJECT IDENTIFIER ::= { pBridgeConformance 1 }
+
+pBridgeCompliances OBJECT IDENTIFIER
+    ::= { pBridgeConformance 2 }
+
+-- -------------------------------------------------------------
+-- units of conformance
+-- -------------------------------------------------------------
+
+pBridgeExtCapGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dDeviceCapabilities,
+        dot1dPortCapabilities
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects indicating the optional
+        capabilities of the device."
+    ::= { pBridgeGroups 1 }
+
+pBridgeDeviceGmrpGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dGmrpStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing device-level control
+        for the Multicast Filtering extended bridge services."
+    ::= { pBridgeGroups 2 }
+
+pBridgeDevicePriorityGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTrafficClassesEnabled
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing device-level control
+        for the Priority services."
+    ::= { pBridgeGroups 3 }
+
+pBridgeDefaultPriorityGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dPortDefaultUserPriority
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects defining the User Priority
+        applicable to each port for media that do not support
+        native User Priority."
+    ::= { pBridgeGroups 4 }
+
+pBridgeRegenPriorityGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dRegenUserPriority
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects defining the User Priorities
+        applicable to each port for media that support native
+        User Priority."
+    ::= { pBridgeGroups 5 }
+
+pBridgePriorityGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dPortNumTrafficClasses,
+        dot1dTrafficClass
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects defining the traffic classes
+        within a bridge for each evaluated User Priority."
+    ::= { pBridgeGroups 6 }
+
+pBridgeAccessPriorityGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dPortOutboundAccessPriority
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects defining the media-dependent
+        outbound access level for each priority."
+    ::= { pBridgeGroups 7 }
+
+pBridgePortGarpGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dPortGarpJoinTime,
+        dot1dPortGarpLeaveTime,
+        dot1dPortGarpLeaveAllTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing port level control
+        and status information for GARP operation."
+    ::= { pBridgeGroups 8 }
+
+pBridgePortGmrpGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dPortGmrpStatus,
+        dot1dPortGmrpFailedRegistrations,
+        dot1dPortGmrpLastPduOrigin
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "A collection of objects providing port level control
+        and status information for GMRP operation."
+    ::= { pBridgeGroups 9 }
+
+pBridgeHCPortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTpHCPortInFrames,
+        dot1dTpHCPortOutFrames,
+        dot1dTpHCPortInDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing 64-bit statistics
+         counters for high-capacity bridge ports."
+    ::= { pBridgeGroups 10 }
+
+pBridgePortOverflowGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTpPortInOverflowFrames,
+        dot1dTpPortOutOverflowFrames,
+        dot1dTpPortInOverflowDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing overflow statistics
+        counters for high-capacity bridge ports."
+    ::= { pBridgeGroups 11 }
+
+pBridgePortGmrpGroup2 OBJECT-GROUP
+    OBJECTS {
+        dot1dPortGmrpStatus,
+        dot1dPortGmrpFailedRegistrations,
+        dot1dPortGmrpLastPduOrigin,
+        dot1dPortRestrictedGroupRegistration
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing port level control
+        and status information for GMRP operation."
+    ::= { pBridgeGroups 12 }
+
+-- -------------------------------------------------------------
+-- compliance statements
+-- -------------------------------------------------------------
+
+pBridgeCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+        "The compliance statement for device support of Priority
+        and Multicast Filtering extended bridging services."
+
+    MODULE
+        MANDATORY-GROUPS { pBridgeExtCapGroup }
+
+        GROUP       pBridgeDeviceGmrpGroup
+        DESCRIPTION
+            "This group is mandatory for devices supporting the GMRP
+            application, defined by IEEE 802.1D Extended Filtering
+            Services."
+
+        GROUP       pBridgeDevicePriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by IEEE
+            802.1D."
+
+        GROUP       pBridgeDefaultPriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by the
+            extended bridge services with media types, such as
+            Ethernet, that do not support native User Priority."
+
+        GROUP       pBridgeRegenPriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by IEEE 802.1D
+            and that have interface media types that support
+            native User Priority, e.g., IEEE 802.5."
+
+        GROUP       pBridgePriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by IEEE 802.1D."
+
+        GROUP       pBridgeAccessPriorityGroup
+        DESCRIPTION
+            "This group is optional and is relevant only for devices
+            supporting the priority forwarding operations defined by
+
+            IEEE 802.1D and that have interface media types that
+            support native Access Priority, e.g., IEEE 802.5."
+
+        GROUP       pBridgePortGarpGroup
+        DESCRIPTION
+            "This group is mandatory for devices supporting any
+            of the GARP applications: e.g., GMRP, defined by the
+            extended filtering services of 802.1D; or GVRP,
+            defined by 802.1Q (refer to the Q-BRIDGE-MIB for
+            conformance statements for GVRP)."
+
+        GROUP       pBridgePortGmrpGroup
+        DESCRIPTION
+            "This group is mandatory for devices supporting the
+            GMRP application, as defined by IEEE 802.1D Extended
+            Filtering Services."
+
+        GROUP       pBridgeHCPortGroup
+        DESCRIPTION
+            "Support for this group in a device is mandatory for those
+            bridge ports that map to network interfaces that have the
+            value of the corresponding instance of ifSpeed
+            greater than 650,000,000 bits/second."
+
+        GROUP       pBridgePortOverflowGroup
+        DESCRIPTION
+            "Support for this group in a device is mandatory for those
+            bridge ports that map to network interfaces that have the
+            value of the corresponding instance of ifSpeed
+            greater than 650,000,000 bits/second."
+
+        OBJECT      dot1dPortNumTrafficClasses
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      dot1dTrafficClass
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      dot1dRegenUserPriority
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+       ::= { pBridgeCompliances 1 }
+
+pBridgeCompliance2 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for device support of Priority
+        and Multicast Filtering extended bridging services."
+
+    MODULE
+        MANDATORY-GROUPS { pBridgeExtCapGroup }
+
+        GROUP       pBridgeDeviceGmrpGroup
+        DESCRIPTION
+            "This group is mandatory for devices supporting the GMRP
+            application, defined by IEEE 802.1D Extended Filtering
+            Services."
+
+        GROUP       pBridgeDevicePriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by IEEE
+            802.1D."
+
+        GROUP       pBridgeDefaultPriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by the
+            extended bridge services with media types, such as
+            Ethernet, that do not support native User Priority."
+
+        GROUP       pBridgeRegenPriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by IEEE 802.1D
+            and that have interface media types that support
+            native User Priority, e.g., IEEE 802.5."
+
+        GROUP       pBridgePriorityGroup
+        DESCRIPTION
+            "This group is mandatory only for devices supporting
+            the priority forwarding operations defined by IEEE 802.1D."
+
+        GROUP       pBridgeAccessPriorityGroup
+        DESCRIPTION
+            "This group is optional and is relevant only for devices
+            supporting the priority forwarding operations defined by
+            IEEE 802.1D and that have interface media types that
+            support native Access Priority, e.g., IEEE 802.5."
+
+        GROUP       pBridgePortGarpGroup
+        DESCRIPTION
+            "This group is mandatory for devices supporting any
+            of the GARP applications: e.g., GMRP, defined by the
+            extended filtering services of 802.1D; or GVRP,
+            defined by 802.1Q (refer to the Q-BRIDGE-MIB for
+            conformance statements for GVRP)."
+
+        GROUP       pBridgePortGmrpGroup2
+        DESCRIPTION
+            "This group is mandatory for devices supporting the
+            GMRP application, as defined by IEEE 802.1D Extended
+            Filtering Services."
+
+        GROUP       pBridgeHCPortGroup
+        DESCRIPTION
+            "Support for this group in a device is mandatory for those
+            bridge ports that map to network interfaces that have the
+            value of the corresponding instance of ifSpeed
+            greater than 650,000,000 bits/second."
+
+        GROUP       pBridgePortOverflowGroup
+        DESCRIPTION
+            "Support for this group in a device is mandatory for those
+            bridge ports that map to network interfaces that have the
+            value of the corresponding instance of ifSpeed
+            greater than 650,000,000 bits/second."
+
+        OBJECT      dot1dPortNumTrafficClasses
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      dot1dTrafficClass
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      dot1dRegenUserPriority
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+       ::= { pBridgeCompliances 2 }
+
+END
diff --git a/snmp_builder/mibs/PARALLEL-MIB.mib b/snmp_builder/mibs/PARALLEL-MIB.mib
new file mode 100644
index 0000000..3098ee4
--- /dev/null
+++ b/snmp_builder/mibs/PARALLEL-MIB.mib
@@ -0,0 +1,286 @@
+PARALLEL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32
+        FROM SNMPv2-SMI
+    InterfaceIndex
+        FROM IF-MIB
+    transmission
+        FROM RFC1213-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+para MODULE-IDENTITY
+     LAST-UPDATED "9405261700Z"
+     ORGANIZATION "IETF Character MIB Working Group"
+     CONTACT-INFO
+            "        Bob Stewart
+             Postal: Xyplex, Inc.
+                     295 Foster Street
+                     Littleton, MA 01460
+
+                Tel: 508-952-4816
+                Fax: 508-952-4887
+             E-mail: rlstewart@eng.xyplex.com"
+     DESCRIPTION
+            "The MIB module for Parallel-printer-like hardware devices."
+    ::= { transmission 34 }
+
+-- Generic Parallel-printer-like information
+
+paraNumber OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of ports (regardless of their current
+        state) in the Parallel-printer-like port table."
+    ::= { para 1 }
+
+-- the Parallel-printer-like Port table
+
+paraPortTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ParaPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port entries.  The number of entries is
+        given by the value of paraNumber."
+    ::= { para 2 }
+
+paraPortEntry OBJECT-TYPE
+    SYNTAX ParaPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Status and parameter values for a port."
+    INDEX { paraPortIndex }
+    ::= { paraPortTable 1 }
+
+ParaPortEntry ::=
+    SEQUENCE {
+        paraPortIndex
+            InterfaceIndex,
+        paraPortType
+            INTEGER,
+        paraPortInSigNumber
+            Integer32,
+        paraPortOutSigNumber
+            Integer32
+    }
+
+paraPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of ifIndex for the port.  By convention
+        and if possible, hardware port numbers map directly
+        to external connectors.  The value for each port must
+        remain constant at least from one re-initialization
+        of the network management agent to the next."
+    ::= { paraPortEntry 1 }
+
+paraPortType OBJECT-TYPE
+    SYNTAX INTEGER {
+        other(1),
+        centronics(2),
+        dataproducts(3)
+    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The port's hardware type."
+    ::= { paraPortEntry 2 }
+
+paraPortInSigNumber OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of input signals for the port in the
+        input signal table (paraPortInSigTable).  The table
+        contains entries only for those signals the software
+        can detect and that are useful to observe."
+    ::= { paraPortEntry 3 }
+
+paraPortOutSigNumber OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of output signals for the port in the
+        output signal table (paraPortOutSigTable).  The
+        table contains entries only for those signals the
+        software can assert and that are useful to observe."
+    ::= { paraPortEntry 4 }
+
+-- Parallel-printer-like Input Signal Table
+
+paraInSigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ParaInSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port input control signal entries."
+    ::= { para 3 }
+
+paraInSigEntry OBJECT-TYPE
+    SYNTAX ParaInSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Input control signal status for a hardware port."
+    INDEX { paraInSigPortIndex, paraInSigName }
+    ::= { paraInSigTable 1 }
+
+ParaInSigEntry ::=
+    SEQUENCE {
+        paraInSigPortIndex
+            InterfaceIndex,
+        paraInSigName
+            INTEGER,
+        paraInSigState
+            INTEGER,
+        paraInSigChanges
+            Counter32
+    }
+
+paraInSigPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of paraPortIndex for the port to which
+        this entry belongs."
+    ::= { paraInSigEntry 1 }
+
+paraInSigName OBJECT-TYPE
+    SYNTAX INTEGER { power(1), online(2), busy(3),
+                     paperout(4), fault(5) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Identification of a hardware signal."
+    ::= { paraInSigEntry 2 }
+
+paraInSigState OBJECT-TYPE
+    SYNTAX INTEGER { none(1), on(2), off(3) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current signal state."
+    ::= { paraInSigEntry 3 }
+
+paraInSigChanges OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of times the signal has changed from
+        'on' to 'off' or from 'off' to 'on'."
+    ::= { paraInSigEntry 4 }
+
+-- Output Signal Table
+
+paraOutSigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ParaOutSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port output control signal entries."
+    ::= { para 4 }
+
+paraOutSigEntry OBJECT-TYPE
+    SYNTAX ParaOutSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Output control signal status for a hardware port."
+    INDEX { paraOutSigPortIndex, paraOutSigName }
+    ::= { paraOutSigTable 1 }
+
+ParaOutSigEntry ::=
+    SEQUENCE {
+        paraOutSigPortIndex
+            InterfaceIndex,
+        paraOutSigName
+            INTEGER,
+        paraOutSigState
+            INTEGER,
+        paraOutSigChanges
+            Counter32
+    }
+
+paraOutSigPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of paraPortIndex for the port to which
+        this entry belongs."
+    ::= { paraOutSigEntry 1 }
+
+paraOutSigName OBJECT-TYPE
+    SYNTAX INTEGER { power(1), online(2), busy(3),
+                     paperout(4), fault(5) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Identification of a hardware signal."
+    ::= { paraOutSigEntry 2 }
+
+paraOutSigState OBJECT-TYPE
+    SYNTAX INTEGER { none(1), on(2), off(3) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current signal state."
+    ::= { paraOutSigEntry 3 }
+
+paraOutSigChanges OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of times the signal has changed from
+        'on' to 'off' or from 'off' to 'on'."
+    ::= { paraOutSigEntry 4 }
+
+-- conformance information
+
+paraConformance OBJECT IDENTIFIER ::= { para 5 }
+
+paraGroups      OBJECT IDENTIFIER ::= { paraConformance 1 }
+paraCompliances OBJECT IDENTIFIER ::= { paraConformance 2 }
+
+-- compliance statements
+
+paraCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities
+            which have Parallel-printer-like hardware
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { paraGroup }
+    ::= { paraCompliances 1 }
+
+-- units of conformance
+
+paraGroup    OBJECT-GROUP
+    OBJECTS { paraNumber, paraPortIndex, paraPortType,
+              paraPortInSigNumber, paraPortOutSigNumber,
+              paraInSigPortIndex, paraInSigName,
+              paraInSigState, paraInSigChanges,
+              paraOutSigPortIndex, paraOutSigName,
+              paraOutSigState, paraOutSigChanges }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+             applicable to all Parallel-printer-like interfaces."
+    ::= { paraGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/PIM-BSR-MIB.mib b/snmp_builder/mibs/PIM-BSR-MIB.mib
new file mode 100644
index 0000000..5d157d6
--- /dev/null
+++ b/snmp_builder/mibs/PIM-BSR-MIB.mib
@@ -0,0 +1,699 @@
+PIM-BSR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    mib-2, Unsigned32, TimeTicks     FROM SNMPv2-SMI
+    RowStatus, TruthValue,
+    StorageType                      FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP               FROM SNMPv2-CONF
+    InetAddressType,
+    InetAddressPrefixLength,
+    InetAddress,
+    InetZoneIndex                    FROM INET-ADDRESS-MIB;
+
+pimBsrMIB MODULE-IDENTITY
+    LAST-UPDATED "200805280000Z" -- 28 May 2008
+    ORGANIZATION
+            "IETF Protocol Independent Multicast (PIM) Working Group"
+    CONTACT-INFO
+            "Email: pim@ietf.org
+             WG charter:
+             http://www.ietf.org/html.charters/pim-charter.html"
+    DESCRIPTION
+            "The MIB module for management of the Bootstrap Router
+            (BSR) mechanism for PIM routers.
+
+            Copyright (C) The IETF Trust (2008).  This version
+            of this MIB module is part of RFC 5240; see the RFC
+            itself for full legal notices."
+    REVISION     "200805280000Z" -- 28 May 2008
+    DESCRIPTION  "Initial version, published as RFC 5240."
+    ::= { mib-2 172 }
+
+--
+-- Top-level structure
+--
+
+pimBsrNotifications   OBJECT IDENTIFIER ::= { pimBsrMIB 0 }
+pimBsrObjects         OBJECT IDENTIFIER ::= { pimBsrMIB 1 }
+
+--
+-- Conformance Information
+--
+
+pimBsrConformance OBJECT IDENTIFIER ::= { pimBsrMIB 2 }
+pimBsrCompliances OBJECT IDENTIFIER ::= { pimBsrConformance 1 }
+pimBsrGroups      OBJECT IDENTIFIER ::= { pimBsrConformance 2 }
+
+--
+-- The BSR Candidate-RP Table
+--
+
+pimBsrCandidateRPTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimBsrCandidateRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the IP multicast group
+            prefixes for which the local router is to advertise
+            itself as a Candidate-RP."
+    ::= { pimBsrObjects 1 }
+
+pimBsrCandidateRPEntry OBJECT-TYPE
+    SYNTAX     PimBsrCandidateRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the
+             pimBsrCandidateRPTable."
+    INDEX      { pimBsrCandidateRPAddressType,
+                 pimBsrCandidateRPAddress,
+                 pimBsrCandidateRPGroupAddress,
+                 pimBsrCandidateRPGroupPrefixLength }
+    ::= { pimBsrCandidateRPTable 1 }
+
+PimBsrCandidateRPEntry ::= SEQUENCE {
+    pimBsrCandidateRPAddressType       InetAddressType,
+    pimBsrCandidateRPAddress           InetAddress,
+    pimBsrCandidateRPGroupAddress      InetAddress,
+    pimBsrCandidateRPGroupPrefixLength InetAddressPrefixLength,
+    pimBsrCandidateRPBidir             TruthValue,
+    pimBsrCandidateRPAdvTimer          TimeTicks,
+    pimBsrCandidateRPPriority          Unsigned32,
+    pimBsrCandidateRPAdvInterval       Unsigned32,
+    pimBsrCandidateRPHoldtime          Unsigned32,
+    pimBsrCandidateRPStatus            RowStatus,
+    pimBsrCandidateRPStorageType       StorageType
+}
+
+pimBsrCandidateRPAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The Inet address type of the Candidate-RP."
+    ::= { pimBsrCandidateRPEntry 1 }
+
+pimBsrCandidateRPAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (unicast) address that will be advertised as a
+            Candidate-RP.  The InetAddressType is given by the
+            pimBsrCandidateRPAddressType object."
+    ::= { pimBsrCandidateRPEntry 2 }
+
+pimBsrCandidateRPGroupAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address that, when combined with
+            the corresponding value of
+            pimBsrCandidateRPGroupPrefixLength, identifies a group
+            prefix for which the local router will advertise itself
+            as a Candidate-RP.  The InetAddressType is given by the
+            pimBsrCandidateRPAddressType object.
+
+            This address object is only significant up to
+            pimBsrCandidateRPGroupPrefixLength bits.  The
+            remainder of the address bits are zero.  This is
+            especially important for this field, which is part of
+            the index of this entry.  Any non-zero bits would
+            signify an entirely different entry."
+    ::= { pimBsrCandidateRPEntry 3 }
+
+pimBsrCandidateRPGroupPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength (4..128)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address mask that, when combined
+            with the corresponding value of
+            pimBsrCandidateRPGroupAddress, identifies a group prefix
+            for which the local router will advertise itself as a
+            Candidate-RP.  The InetAddressType is given by the
+
+            pimBsrCandidateRPAddressType object."
+    ::= { pimBsrCandidateRPEntry 4 }
+
+pimBsrCandidateRPBidir OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "If this object is set to TRUE, this group range is
+            advertised with this RP as a BIDIR-PIM group range.  If
+            it is set to FALSE, it is advertised as a PIM-SM group
+            range."
+    DEFVAL { false }
+    ::= { pimBsrCandidateRPEntry 5 }
+
+pimBsrCandidateRPAdvTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router next sends
+            a Candidate-RP-Advertisement to the elected BSR for
+            this zone."
+    ::= { pimBsrCandidateRPEntry 6 }
+
+pimBsrCandidateRPPriority OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The priority for this Candidate-RP advertised in
+             Candidate-RP-Advertisements."
+    REFERENCE "RFC 5059, section 3.2"
+    DEFVAL { 192 }
+    ::= { pimBsrCandidateRPEntry 7 }
+
+pimBsrCandidateRPAdvInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..26214)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "A Candidate-RP generates Candidate-RP-Advertisements
+            periodically.  This object represents the time interval
+            in seconds between two consecutive advertisements."
+    REFERENCE "RFC 5059, sections 3.2 and 5"
+    DEFVAL { 60 }
+    ::= { pimBsrCandidateRPEntry 8 }
+
+pimBsrCandidateRPHoldtime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Holdtime for this Candidate-RP.  The amount of time (in
+            seconds) this Candidate-RP entry is valid.
+
+            This object's value can be zero only when this C-RP is
+            shutting down."
+    REFERENCE "RFC 5059, section 4.2"
+    DEFVAL { 150 }
+    ::= { pimBsrCandidateRPEntry 9 }
+
+pimBsrCandidateRPStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.
+
+            This status object can be set to active(1) without
+            setting any other columnar objects in this entry.
+
+            All writable objects in this entry can be modified
+            when the status of this entry is active(1)."
+    ::= { pimBsrCandidateRPEntry 10 }
+
+pimBsrCandidateRPStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type for this row.  Rows having the value
+            'permanent' need not allow write-access to any columnar
+            objects in the row."
+      DEFVAL { nonVolatile }
+   ::= { pimBsrCandidateRPEntry 11 }
+
+--
+
+-- The BSR Elected BSR RP-Set Table
+--
+
+pimBsrElectedBSRRPSetTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimBsrElectedBSRRPSetEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing BSR-specific information
+            about PIM group mappings learned via C-RP advertisements
+            or created locally using configurations.  This table is
+            maintained only on the Elected BSR.
+
+            An Elected BSR uses this table to create Bootstrap
+            messages after applying a local policy to include some
+            or all of the group mappings in this table."
+    ::= { pimBsrObjects 2 }
+
+pimBsrElectedBSRRPSetEntry OBJECT-TYPE
+    SYNTAX     PimBsrElectedBSRRPSetEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the
+             pimBsrElectedBSRRPSetTable."
+    INDEX      { pimBsrElectedBSRGrpMappingAddrType,
+                 pimBsrElectedBSRGrpMappingGrpAddr,
+                 pimBsrElectedBSRGrpMappingGrpPrefixLen,
+                 pimBsrElectedBSRGrpMappingRPAddr }
+    ::= { pimBsrElectedBSRRPSetTable 1 }
+
+PimBsrElectedBSRRPSetEntry ::= SEQUENCE {
+    pimBsrElectedBSRGrpMappingAddrType      InetAddressType,
+    pimBsrElectedBSRGrpMappingGrpAddr       InetAddress,
+    pimBsrElectedBSRGrpMappingGrpPrefixLen  InetAddressPrefixLength,
+    pimBsrElectedBSRGrpMappingRPAddr        InetAddress,
+    pimBsrElectedBSRRPSetPriority           Unsigned32,
+    pimBsrElectedBSRRPSetHoldtime           Unsigned32,
+    pimBsrElectedBSRRPSetExpiryTime         TimeTicks,
+    pimBsrElectedBSRRPSetGrpBidir           TruthValue
+}
+
+pimBsrElectedBSRGrpMappingAddrType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The Inet address type of the IP multicast group
+            prefix."
+    ::= { pimBsrElectedBSRRPSetEntry 2 }
+
+pimBsrElectedBSRGrpMappingGrpAddr OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address that, when combined
+            with pimBsrElectedBSRGrpMappingGrpPrefixLen, gives the
+            group prefix for this mapping.  The InetAddressType is
+            given by the pimBsrElectedBSRGrpMappingAddrType object.
+
+            This address object is only significant up to
+            pimBsrElectedBSRGrpMappingGrpPrefixLen bits.  The
+            remainder of the address bits are zero.  This is
+            especially important for this field, which is part of
+            the index of this entry.  Any non-zero bits would
+            signify an entirely different entry."
+    ::= { pimBsrElectedBSRRPSetEntry 3 }
+
+pimBsrElectedBSRGrpMappingGrpPrefixLen OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength (4..128)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group prefix length that, when combined
+            with pimBsrElectedBSRGrpMappingGrpAddr, gives the group
+            prefix for this mapping.  The InetAddressType is given by
+            the pimBsrElectedBSRGrpMappingAddrType object.  If
+            pimBsrElectedBSRGrpMappingAddrType is 'ipv4' or 'ipv4z',
+            this object must be in the range 4..32.  If
+            pimBsrElectedBSRGrpMappingAddrType is 'ipv6' or 'ipv6z',
+            this object must be in the range 8..128."
+    ::= { pimBsrElectedBSRRPSetEntry 4 }
+
+pimBsrElectedBSRGrpMappingRPAddr OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the RP to be used for groups within
+            this group prefix.  The InetAddressType is given by the
+            pimBsrElectedBSRGrpMappingAddrType object."
+    ::= { pimBsrElectedBSRRPSetEntry 5 }
+
+pimBsrElectedBSRRPSetPriority OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The priority for RP.  Numerically higher values for
+            this object indicate lower priorities, with the value
+            zero denoting the highest priority."
+    REFERENCE "RFC 5059, section 4.1"
+    ::= { pimBsrElectedBSRRPSetEntry 6 }
+
+pimBsrElectedBSRRPSetHoldtime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The holdtime for RP"
+    REFERENCE "RFC 5059, section 4.1"
+    ::= { pimBsrElectedBSRRPSetEntry 7 }
+
+pimBsrElectedBSRRPSetExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining before this entry will be
+            aged out.  The value zero indicates that this entry will
+            never be aged out."
+    ::= { pimBsrElectedBSRRPSetEntry 8 }
+
+pimBsrElectedBSRRPSetGrpBidir OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If this object is TRUE, this group range with this
+            RP is a BIDIR-PIM group range.  If it is set to FALSE,
+            it is a PIM-SM group range."
+    ::= { pimBsrElectedBSRRPSetEntry 9 }
+
+--
+-- The BSR Candidate-BSR Table
+--
+
+pimBsrCandidateBSRTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimBsrCandidateBSREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing Candidate-BSR
+            configuration for the local router.  The table contains
+            one row for each zone for which the local router is
+            to advertise itself as a Candidate-BSR."
+    ::= { pimBsrObjects 3 }
+
+pimBsrCandidateBSREntry OBJECT-TYPE
+    SYNTAX     PimBsrCandidateBSREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the
+            pimBsrCandidateBSRTable."
+    INDEX      { pimBsrCandidateBSRZoneIndex }
+    ::= { pimBsrCandidateBSRTable 1 }
+
+PimBsrCandidateBSREntry ::= SEQUENCE {
+    pimBsrCandidateBSRZoneIndex        InetZoneIndex,
+    pimBsrCandidateBSRAddressType      InetAddressType,
+    pimBsrCandidateBSRAddress          InetAddress,
+    pimBsrCandidateBSRPriority         Unsigned32,
+    pimBsrCandidateBSRHashMaskLength   Unsigned32,
+    pimBsrCandidateBSRElectedBSR       TruthValue,
+    pimBsrCandidateBSRBootstrapTimer   TimeTicks,
+    pimBsrCandidateBSRStatus           RowStatus,
+    pimBsrCandidateBSRStorageType      StorageType
+}
+
+pimBsrCandidateBSRZoneIndex OBJECT-TYPE
+    SYNTAX     InetZoneIndex (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The zone index uniquely identifies the zone on a
+            device to which this Candidate-BSR is attached.  There is
+            one entry for each zone in ipMcastZoneTable.  Scope-level
+            information for this zone can be extracted from
+            ipMcastZoneTable in IP Multicast MIB [RFC5132].
+
+            Zero is a special value used to request the default zone
+            for a given scope.  Zero is not a valid value for this
+            object."
+    ::= { pimBsrCandidateBSREntry 1 }
+
+pimBsrCandidateBSRAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The address type of the Candidate-BSR."
+    ::= { pimBsrCandidateBSREntry 2 }
+
+pimBsrCandidateBSRAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The (unicast) address that the local router will
+            use to advertise itself as a Candidate-BSR.  The
+            InetAddressType is given by the
+            pimBsrCandidateBSRAddressType object."
+    ::= { pimBsrCandidateBSREntry 3 }
+
+pimBsrCandidateBSRPriority OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The priority value for the local router as a
+            Candidate-BSR for this zone.  Numerically higher
+            values for this object indicate higher priorities."
+    DEFVAL { 0 }
+    ::= { pimBsrCandidateBSREntry 4 }
+
+pimBsrCandidateBSRHashMaskLength OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..128)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The hash mask length (used in the RP hash function)
+            that the local router will advertise in its Bootstrap
+            messages for this zone.  This object defaults
+            to 30 if pimBsrCandidateBSRAddressType is 'ipv4' or
+            'ipv4z' , and defaults to 126 if
+            pimBsrCandidateBSRAddressType is 'ipv6' or 'ipv6z'."
+    ::= { pimBsrCandidateBSREntry 5 }
+
+pimBsrCandidateBSRElectedBSR OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router is the elected BSR for this
+            zone."
+    ::= { pimBsrCandidateBSREntry 6 }
+
+pimBsrCandidateBSRBootstrapTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router next
+            originates a Bootstrap message for this zone.
+            Value of this object is zero if
+            pimBsrCandidateBSRElectedBSR is 'FALSE'."
+    ::= { pimBsrCandidateBSREntry 7 }
+
+pimBsrCandidateBSRStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may
+            be created or old entries deleted from this table.
+
+            This status object can be set to active(1) without
+            setting any other columnar objects in this entry.
+
+            All writable objects in this entry can be modified
+            when the status of this entry is active(1)."
+    ::= { pimBsrCandidateBSREntry 8 }
+
+pimBsrCandidateBSRStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type for this row.  Rows having the value
+            'permanent' need not allow write-access to any columnar
+            objects in the row."
+      DEFVAL { nonVolatile }
+   ::= { pimBsrCandidateBSREntry 9 }
+
+--
+-- The BSR Elected-BSR Table
+--
+
+pimBsrElectedBSRTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimBsrElectedBSREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information about
+            elected BSRs.  The table contains one row for each
+            zone for which there is an elected BSR."
+    ::= { pimBsrObjects 4 }
+
+pimBsrElectedBSREntry OBJECT-TYPE
+    SYNTAX     PimBsrElectedBSREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the
+             pimBsrElectedBSRTable."
+    INDEX      { pimBsrElectedBSRZoneIndex }
+    ::= { pimBsrElectedBSRTable 1 }
+
+PimBsrElectedBSREntry ::= SEQUENCE {
+    pimBsrElectedBSRZoneIndex        InetZoneIndex,
+    pimBsrElectedBSRAddressType      InetAddressType,
+    pimBsrElectedBSRAddress          InetAddress,
+    pimBsrElectedBSRPriority         Unsigned32,
+    pimBsrElectedBSRHashMaskLength   Unsigned32,
+    pimBsrElectedBSRExpiryTime       TimeTicks
+}
+
+pimBsrElectedBSRZoneIndex OBJECT-TYPE
+    SYNTAX     InetZoneIndex (1..4294967295)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The zone index uniquely identifies the zone on a
+            device to which this Elected BSR is attached.  There
+            is one entry for each zone in ipMcastZoneTable.
+            Scope-level information for this zone can be extracted
+            from ipMcastZoneTable in IP Multicast MIB [RFC5132].
+
+            Zero is a special value used to request the default zone
+            for a given scope.  Zero is not a valid value for this
+            object."
+    ::= { pimBsrElectedBSREntry 1 }
+
+pimBsrElectedBSRAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the elected BSR."
+    ::= { pimBsrElectedBSREntry 2 }
+
+pimBsrElectedBSRAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The (unicast) address of the elected BSR.  The
+            InetAddressType is given by the
+            pimBsrElectedBSRAddressType object."
+    ::= { pimBsrElectedBSREntry 3 }
+
+pimBsrElectedBSRPriority OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The priority value for the elected BSR for this address
+            type.  Numerically higher values for this object indicate
+            higher priorities."
+    ::= { pimBsrElectedBSREntry 4 }
+
+pimBsrElectedBSRHashMaskLength OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..128)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The hash mask length (used in the RP hash function)
+            advertised by the elected BSR for this zone."
+    ::= { pimBsrElectedBSREntry 5 }
+
+pimBsrElectedBSRExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining before the elected BSR for
+            this zone will be declared down."
+    ::= { pimBsrElectedBSREntry 6 }
+
+--
+-- PIM BSR Notifications
+--
+
+pimBsrElectedBSRLostElection   NOTIFICATION-TYPE
+    OBJECTS { pimBsrElectedBSRAddressType,
+              pimBsrElectedBSRAddress,
+              pimBsrElectedBSRPriority }
+    STATUS     current
+    DESCRIPTION
+            "A pimBsrElectedBSRLostElection notification should be
+            generated when current E-BSR lost election to a new
+            Candidate-BSR.  Only an E-BSR should generate this
+            notification.
+
+            This notification is generated when
+            pimBsrCandidateBSRElectedBSR becomes FALSE."
+    REFERENCE "RFC 5059, section 3.1"
+    ::= { pimBsrNotifications 1 }
+
+pimBsrCandidateBSRWinElection   NOTIFICATION-TYPE
+    OBJECTS { pimBsrCandidateBSRElectedBSR }
+    STATUS     current
+    DESCRIPTION
+            "A pimBsrCandidateBSRWinElection notification should be
+            generated when a C-BSR wins BSR Election.  Only an
+            E-BSR should generate this notification.
+
+            This notification is generated when
+            pimBsrCandidateBSRElectedBSR becomes TRUE."
+    REFERENCE "RFC 5059, section 3.1"
+    ::= { pimBsrNotifications 2 }
+
+--
+-- Compliance Statements
+--
+
+pimBsrCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for PIM routers that implement
+            the Bootstrap Router (BSR) mechanism."
+    MODULE  -- this module
+    MANDATORY-GROUPS { pimBsrObjectGroup }
+
+      GROUP   pimBsrDiagnosticsGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { pimBsrCompliances 1 }
+
+--
+-- Units of Conformance
+--
+
+pimBsrObjectGroup OBJECT-GROUP
+
+    OBJECTS { pimBsrCandidateRPBidir,
+              pimBsrCandidateRPAdvTimer,
+              pimBsrCandidateRPPriority,
+              pimBsrCandidateRPAdvInterval,
+              pimBsrCandidateRPHoldtime,
+              pimBsrCandidateRPStatus,
+              pimBsrCandidateRPStorageType,
+              pimBsrElectedBSRRPSetPriority,
+              pimBsrElectedBSRRPSetHoldtime,
+              pimBsrElectedBSRRPSetExpiryTime,
+              pimBsrElectedBSRRPSetGrpBidir,
+              pimBsrCandidateBSRAddress,
+              pimBsrCandidateBSRAddressType,
+              pimBsrCandidateBSRPriority,
+              pimBsrCandidateBSRHashMaskLength,
+              pimBsrCandidateBSRElectedBSR,
+              pimBsrCandidateBSRBootstrapTimer,
+              pimBsrCandidateBSRStatus,
+              pimBsrCandidateBSRStorageType,
+              pimBsrElectedBSRAddress,
+              pimBsrElectedBSRAddressType,
+              pimBsrElectedBSRPriority,
+              pimBsrElectedBSRHashMaskLength,
+              pimBsrElectedBSRExpiryTime }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects for managing the Bootstrap
+            Router (BSR) mechanism for PIM routers."
+    ::= { pimBsrGroups 1 }
+
+pimBsrDiagnosticsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS  { pimBsrElectedBSRLostElection,
+                     pimBsrCandidateBSRWinElection }
+    STATUS  current
+    DESCRIPTION
+            "Objects providing additional diagnostics related to
+            the Bootstrap Router (BSR) mechanism for PIM routers."
+    ::= { pimBsrGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/PIM-MIB.mib b/snmp_builder/mibs/PIM-MIB.mib
new file mode 100644
index 0000000..128aeb2
--- /dev/null
+++ b/snmp_builder/mibs/PIM-MIB.mib
@@ -0,0 +1,889 @@
+PIM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, experimental,
+    NOTIFICATION-TYPE,
+    Integer32, IpAddress, TimeTicks  FROM SNMPv2-SMI
+    RowStatus, TruthValue            FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP               FROM SNMPv2-CONF
+    ipMRouteGroup, ipMRouteSource,
+    ipMRouteSourceMask, ipMRouteNextHopGroup,
+    ipMRouteNextHopSource, ipMRouteNextHopSourceMask,
+    ipMRouteNextHopIfIndex,
+    ipMRouteNextHopAddress           FROM IPMROUTE-STD-MIB
+    InterfaceIndex                   FROM IF-MIB;
+
+pimMIB MODULE-IDENTITY
+    LAST-UPDATED "200009280000Z" -- September 28, 2000
+    ORGANIZATION "IETF IDMR Working Group."
+    CONTACT-INFO
+            " Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA  98052-6399
+              US
+
+              Phone: +1 425 703 8835
+              EMail: dthaler@microsoft.com"
+    DESCRIPTION
+            "The MIB module for management of PIM routers."
+    REVISION     "200009280000Z" -- September 28, 2000
+    DESCRIPTION
+            "Initial version, published as RFC 2934."
+    ::= { experimental 61 }
+
+pimMIBObjects OBJECT IDENTIFIER ::= { pimMIB 1 }
+
+pimTraps      OBJECT IDENTIFIER ::= { pimMIBObjects 0 }
+
+pim           OBJECT IDENTIFIER ::= { pimMIBObjects 1 }
+
+pimJoinPruneInterval OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The default interval at which periodic PIM-SM Join/Prune
+            messages are to be sent."
+    ::= { pim 1 }
+
+-- The PIM Interface Table
+
+pimInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the router's PIM interfaces.
+            IGMP and PIM are enabled on all interfaces listed in this
+            table."
+    ::= { pim 2 }
+
+pimInterfaceEntry OBJECT-TYPE
+    SYNTAX     PimInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimInterfaceTable."
+    INDEX      { pimInterfaceIfIndex }
+    ::= { pimInterfaceTable 1 }
+
+PimInterfaceEntry ::= SEQUENCE {
+    pimInterfaceIfIndex            InterfaceIndex,
+    pimInterfaceAddress            IpAddress,
+    pimInterfaceNetMask            IpAddress,
+    pimInterfaceMode               INTEGER,
+    pimInterfaceDR                 IpAddress,
+    pimInterfaceHelloInterval      Integer32,
+    pimInterfaceStatus             RowStatus,
+    pimInterfaceJoinPruneInterval  Integer32,
+    pimInterfaceCBSRPreference     Integer32
+}
+
+pimInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of this PIM interface."
+    ::= { pimInterfaceEntry 1 }
+
+pimInterfaceAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the PIM interface."
+    ::= { pimInterfaceEntry 2 }
+
+pimInterfaceNetMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The network mask for the IP address of the PIM interface."
+    ::= { pimInterfaceEntry 3 }
+
+pimInterfaceMode OBJECT-TYPE
+    SYNTAX     INTEGER { dense(1), sparse(2), sparseDense(3) }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The configured mode of this PIM interface.  A value of
+            sparseDense is only valid for PIMv1."
+    DEFVAL     { dense }
+    ::= { pimInterfaceEntry 4 }
+
+pimInterfaceDR OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The Designated Router on this PIM interface.  For point-to-
+            point interfaces, this object has the value 0.0.0.0."
+    ::= { pimInterfaceEntry 5 }
+
+pimInterfaceHelloInterval OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which PIM Hello messages are transmitted
+            on this interface."
+    DEFVAL     { 30 }
+    ::= { pimInterfaceEntry 6 }
+
+pimInterfaceStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this entry.  Creating the entry enables PIM
+            on the interface; destroying the entry disables PIM on the
+            interface."
+    ::= { pimInterfaceEntry 7 }
+
+pimInterfaceJoinPruneInterval OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which PIM Join/Prune messages are
+            transmitted on this PIM interface.  The default value of
+            this object is the pimJoinPruneInterval."
+    ::= { pimInterfaceEntry 8 }
+
+pimInterfaceCBSRPreference OBJECT-TYPE
+    SYNTAX     Integer32 (-1..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The preference value for the local interface as a candidate
+            bootstrap router.  The value of -1 is used to indicate that
+            the local interface is not a candidate BSR interface."
+    DEFVAL     { 0 }
+    ::= { pimInterfaceEntry 9 }
+
+-- The PIM Neighbor Table
+
+pimNeighborTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimNeighborEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the router's PIM neighbors."
+    ::= { pim 3 }
+
+pimNeighborEntry OBJECT-TYPE
+    SYNTAX     PimNeighborEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimNeighborTable."
+    INDEX      { pimNeighborAddress }
+    ::= { pimNeighborTable 1 }
+
+PimNeighborEntry ::= SEQUENCE {
+    pimNeighborAddress      IpAddress,
+    pimNeighborIfIndex      InterfaceIndex,
+    pimNeighborUpTime       TimeTicks,
+    pimNeighborExpiryTime   TimeTicks,
+    pimNeighborMode         INTEGER
+}
+
+pimNeighborAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the PIM neighbor for which this entry
+            contains information."
+    ::= { pimNeighborEntry 1 }
+
+pimNeighborIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface used to reach this
+            PIM neighbor."
+    ::= { pimNeighborEntry 2 }
+
+pimNeighborUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this PIM neighbor (last) became a neighbor
+            of the local router."
+    ::= { pimNeighborEntry 3 }
+
+pimNeighborExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining before this PIM neighbor will be
+            aged out."
+    ::= { pimNeighborEntry 4 }
+
+pimNeighborMode OBJECT-TYPE
+    SYNTAX     INTEGER { dense(1), sparse(2) }
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The active PIM mode of this neighbor.  This object is
+            deprecated for PIMv2 routers since all neighbors on the
+            interface must be either dense or sparse as determined by
+            the protocol running on the interface."
+    ::= { pimNeighborEntry 5 }
+
+--
+-- The PIM IP Multicast Route Table
+--
+
+pimIpMRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimIpMRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing PIM-specific information on
+            a subset of the rows of the ipMRouteTable defined in the IP
+            Multicast MIB."
+    ::= { pim 4 }
+
+pimIpMRouteEntry OBJECT-TYPE
+    SYNTAX     PimIpMRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimIpMRouteTable.  There
+            is one entry per entry in the ipMRouteTable whose incoming
+            interface is running PIM."
+    INDEX      { ipMRouteGroup, ipMRouteSource, ipMRouteSourceMask }
+    ::= { pimIpMRouteTable 1 }
+
+PimIpMRouteEntry ::= SEQUENCE {
+    pimIpMRouteUpstreamAssertTimer   TimeTicks,
+    pimIpMRouteAssertMetric          Integer32,
+    pimIpMRouteAssertMetricPref      Integer32,
+    pimIpMRouteAssertRPTBit          TruthValue,
+    pimIpMRouteFlags                 BITS
+}
+
+pimIpMRouteUpstreamAssertTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the router changes its upstream
+            neighbor back to its RPF neighbor.  This timer is called the
+            Assert timer in the PIM Sparse and Dense mode specification.
+
+            A value of 0 indicates that no Assert has changed the
+            upstream neighbor away from the RPF neighbor."
+    ::= { pimIpMRouteEntry 1 }
+
+pimIpMRouteAssertMetric OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The metric advertised by the assert winner on the upstream
+            interface, or 0 if no such assert is in received."
+    ::= { pimIpMRouteEntry 2 }
+
+pimIpMRouteAssertMetricPref OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The preference advertised by the assert winner on the
+            upstream interface, or 0 if no such assert is in effect."
+    ::= { pimIpMRouteEntry 3 }
+
+pimIpMRouteAssertRPTBit OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the RPT-bit advertised by the assert winner on
+            the upstream interface, or false if no such assert is in
+            effect."
+    ::= { pimIpMRouteEntry 4 }
+
+pimIpMRouteFlags OBJECT-TYPE
+    SYNTAX     BITS {
+                  rpt(0),
+                  spt(1)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object describes PIM-specific flags related to a
+            multicast state entry.  See the PIM Sparse Mode
+            specification for the meaning of the RPT and SPT bits."
+    ::= { pimIpMRouteEntry 5 }
+
+--
+-- The PIM Next Hop Table
+--
+
+pimIpMRouteNextHopTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimIpMRouteNextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing PIM-specific information on
+            a subset of the rows of the ipMRouteNextHopTable defined in
+            the IP Multicast MIB."
+    ::= { pim 7 }
+
+pimIpMRouteNextHopEntry OBJECT-TYPE
+    SYNTAX     PimIpMRouteNextHopEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimIpMRouteNextHopTable.
+            There is one entry per entry in the ipMRouteNextHopTable
+            whose interface is running PIM and whose
+            ipMRouteNextHopState is pruned(1)."
+    INDEX      { ipMRouteNextHopGroup, ipMRouteNextHopSource,
+                 ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex,
+                 ipMRouteNextHopAddress }
+    ::= { pimIpMRouteNextHopTable 1 }
+
+PimIpMRouteNextHopEntry ::= SEQUENCE {
+    pimIpMRouteNextHopPruneReason       INTEGER
+}
+
+pimIpMRouteNextHopPruneReason OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  other (1),
+                  prune (2),
+                  assert (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "This object indicates why the downstream interface was
+            pruned, whether in response to a PIM prune message or due to
+            PIM Assert processing."
+    ::= { pimIpMRouteNextHopEntry 2 }
+
+-- The PIM RP Table
+
+pimRPTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The (conceptual) table listing PIM version 1 information
+            for the Rendezvous Points (RPs) for IP multicast groups.
+            This table is deprecated since its function is replaced by
+            the pimRPSetTable for PIM version 2."
+    ::= { pim 5 }
+
+pimRPEntry OBJECT-TYPE
+    SYNTAX     PimRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "An entry (conceptual row) in the pimRPTable.  There is one
+            entry per RP address for each IP multicast group."
+    INDEX      { pimRPGroupAddress, pimRPAddress }
+    ::= { pimRPTable 1 }
+
+PimRPEntry ::= SEQUENCE {
+    pimRPGroupAddress    IpAddress,
+    pimRPAddress         IpAddress,
+    pimRPState           INTEGER,
+    pimRPStateTimer      TimeTicks,
+    pimRPLastChange      TimeTicks,
+    pimRPRowStatus       RowStatus
+}
+
+pimRPGroupAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The IP multicast group address for which this entry
+            contains information about an RP."
+    ::= { pimRPEntry 1 }
+
+pimRPAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The unicast address of the RP."
+    ::= { pimRPEntry 2 }
+
+pimRPState OBJECT-TYPE
+    SYNTAX     INTEGER { up(1), down(2) }
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The state of the RP."
+    ::= { pimRPEntry 3 }
+
+pimRPStateTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The minimum time remaining before the next state change.
+            When pimRPState is up, this is the minimum time which must
+            expire until it can be declared down.  When pimRPState is
+            down, this is the time until it will be declared up (in
+            order to retry)."
+    ::= { pimRPEntry 4 }
+
+pimRPLastChange OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The value of sysUpTime at the time when the corresponding
+            instance of pimRPState last changed its value."
+    ::= { pimRPEntry 5 }
+
+pimRPRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table."
+    ::= { pimRPEntry 6 }
+
+-- The PIM RP-Set Table
+
+pimRPSetTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimRPSetEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing PIM information for
+            candidate Rendezvous Points (RPs) for IP multicast groups.
+            When the local router is the BSR, this information is
+            obtained from received Candidate-RP-Advertisements.  When
+            the local router is not the BSR, this information is
+            obtained from received RP-Set messages."
+    ::= { pim 6 }
+
+pimRPSetEntry OBJECT-TYPE
+    SYNTAX     PimRPSetEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimRPSetTable."
+    INDEX      { pimRPSetComponent, pimRPSetGroupAddress,
+                 pimRPSetGroupMask, pimRPSetAddress }
+    ::= { pimRPSetTable 1 }
+
+PimRPSetEntry ::= SEQUENCE {
+
+    pimRPSetGroupAddress    IpAddress,
+    pimRPSetGroupMask       IpAddress,
+    pimRPSetAddress         IpAddress,
+    pimRPSetHoldTime        Integer32,
+    pimRPSetExpiryTime      TimeTicks,
+    pimRPSetComponent       Integer32
+}
+
+pimRPSetGroupAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address which, when combined with
+            pimRPSetGroupMask, gives the group prefix for which this
+            entry contains information about the Candidate-RP."
+    ::= { pimRPSetEntry 1 }
+
+pimRPSetGroupMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address mask which, when combined with
+            pimRPSetGroupAddress, gives the group prefix for which this
+            entry contains information about the Candidate-RP."
+    ::= { pimRPSetEntry 2 }
+
+pimRPSetAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the Candidate-RP."
+    ::= { pimRPSetEntry 3 }
+
+pimRPSetHoldTime OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The holdtime of a Candidate-RP.  If the local router is not
+            the BSR, this value is 0."
+    ::= { pimRPSetEntry 4 }
+
+pimRPSetExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining before the Candidate-RP will be
+            declared down.  If the local router is not the BSR, this
+            value is 0."
+    ::= { pimRPSetEntry 5 }
+
+pimRPSetComponent OBJECT-TYPE
+    SYNTAX     Integer32 (1..255)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            " A number uniquely identifying the component.  Each
+            protocol instance connected to a separate domain should have
+            a different index value."
+    ::= { pimRPSetEntry 6 }
+
+--
+-- Note: { pim 8 } through { pim 10 } were used in older versions
+-- of this MIB.  Since some earlier versions of this MIB have been
+-- widely-deployed, these values must not be used in the future,
+-- as long the MIB is rooted under { experimental 61 }.
+--
+
+-- The PIM Candidate-RP Table
+
+pimCandidateRPTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimCandidateRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the IP multicast groups for
+            which the local router is to advertise itself as a
+            Candidate-RP when the value of pimComponentCRPHoldTime is
+            non-zero.  If this table is empty, then the local router
+
+            will advertise itself as a Candidate-RP for all groups
+            (providing the value of pimComponentCRPHoldTime is non-
+            zero)."
+    ::= { pim 11 }
+
+pimCandidateRPEntry OBJECT-TYPE
+    SYNTAX     PimCandidateRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimCandidateRPTable."
+    INDEX      { pimCandidateRPGroupAddress,
+                 pimCandidateRPGroupMask }
+    ::= { pimCandidateRPTable 1 }
+
+PimCandidateRPEntry ::= SEQUENCE {
+    pimCandidateRPGroupAddress    IpAddress,
+    pimCandidateRPGroupMask       IpAddress,
+    pimCandidateRPAddress         IpAddress,
+    pimCandidateRPRowStatus       RowStatus
+}
+
+pimCandidateRPGroupAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address which, when combined with
+            pimCandidateRPGroupMask, identifies a group prefix for which
+            the local router will advertise itself as a Candidate-RP."
+    ::= { pimCandidateRPEntry 1 }
+
+pimCandidateRPGroupMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address mask which, when combined with
+            pimCandidateRPGroupMask, identifies a group prefix for which
+            the local router will advertise itself as a Candidate-RP."
+    ::= { pimCandidateRPEntry 2 }
+
+pimCandidateRPAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The (unicast) address of the interface which will be
+
+            advertised as a Candidate-RP."
+    ::= { pimCandidateRPEntry 3 }
+
+pimCandidateRPRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table."
+    ::= { pimCandidateRPEntry 4 }
+
+-- The PIM Component Table
+
+pimComponentTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimComponentEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing objects specific to a PIM
+            domain.  One row exists for each domain to which the router
+            is connected.  A PIM-SM domain is defined as an area of the
+            network over which Bootstrap messages are forwarded.
+            Typically, a PIM-SM router will be a member of exactly one
+            domain.  This table also supports, however, routers which
+            may form a border between two PIM-SM domains and do not
+            forward Bootstrap messages between them."
+    ::= { pim 12 }
+
+pimComponentEntry OBJECT-TYPE
+    SYNTAX     PimComponentEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimComponentTable."
+    INDEX      { pimComponentIndex }
+    ::= { pimComponentTable 1 }
+
+PimComponentEntry ::= SEQUENCE {
+    pimComponentIndex              Integer32,
+    pimComponentBSRAddress         IpAddress,
+    pimComponentBSRExpiryTime      TimeTicks,
+    pimComponentCRPHoldTime        Integer32,
+    pimComponentStatus             RowStatus
+}
+
+pimComponentIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..255)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A number uniquely identifying the component.  Each protocol
+            instance connected to a separate domain should have a
+            different index value.  Routers that only support membership
+            in a single PIM-SM domain should use a pimComponentIndex
+            value of 1."
+    ::= { pimComponentEntry 1 }
+
+pimComponentBSRAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the bootstrap router (BSR) for the local
+            PIM region."
+    ::= { pimComponentEntry 2 }
+
+pimComponentBSRExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining before the bootstrap router in
+            the local domain will be declared down.  For candidate BSRs,
+            this is the time until the component sends an RP-Set
+            message.  For other routers, this is the time until it may
+            accept an RP-Set message from a lower candidate BSR."
+    ::= { pimComponentEntry 3 }
+
+pimComponentCRPHoldTime OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The holdtime of the component when it is a candidate RP in
+            the local domain.  The value of 0 is used to indicate that
+            the local system is not a Candidate-RP."
+    DEFVAL     { 0 }
+    ::= { pimComponentEntry 4 }
+
+pimComponentStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this entry.  Creating the entry creates
+            another protocol instance; destroying the entry disables a
+            protocol instance."
+    ::= { pimComponentEntry 5 }
+
+-- PIM Traps
+
+pimNeighborLoss NOTIFICATION-TYPE
+    OBJECTS {
+       pimNeighborIfIndex
+    }
+    STATUS             current
+    DESCRIPTION
+            "A pimNeighborLoss trap signifies the loss of an adjacency
+            with a neighbor.  This trap should be generated when the
+            neighbor timer expires, and the router has no other
+            neighbors on the same interface with a lower IP address than
+            itself."
+    ::= { pimTraps 1 }
+
+-- conformance information
+
+pimMIBConformance OBJECT IDENTIFIER ::= { pimMIB 2 }
+pimMIBCompliances OBJECT IDENTIFIER ::= { pimMIBConformance 1 }
+pimMIBGroups      OBJECT IDENTIFIER ::= { pimMIBConformance 2 }
+
+-- compliance statements
+
+pimV1MIBCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for routers running PIMv1 and
+            implementing the PIM MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { pimV1MIBGroup }
+    ::= { pimMIBCompliances 1 }
+
+pimSparseV2MIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers running PIM Sparse
+            Mode and implementing the PIM MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { pimV2MIBGroup }
+
+    GROUP      pimV2CandidateRPMIBGroup
+    DESCRIPTION
+            "This group is mandatory if the router is capable of being a
+            Candidate RP."
+
+    OBJECT     pimInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { pimMIBCompliances 2 }
+
+pimDenseV2MIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers running PIM Dense Mode
+            and implementing the PIM MIB."
+    MODULE  -- this module
+
+        MANDATORY-GROUPS { pimDenseV2MIBGroup }
+
+    OBJECT     pimInterfaceStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+             "Write access is not required."
+    ::= { pimMIBCompliances 3 }
+
+-- units of conformance
+
+pimNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { pimNeighborLoss }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notifications for signaling important PIM
+            events."
+    ::= { pimMIBGroups 1 }
+
+pimV2MIBGroup OBJECT-GROUP
+    OBJECTS { pimJoinPruneInterval, pimNeighborIfIndex,
+              pimNeighborUpTime, pimNeighborExpiryTime,
+              pimInterfaceAddress, pimInterfaceNetMask,
+              pimInterfaceDR, pimInterfaceHelloInterval,
+              pimInterfaceStatus, pimInterfaceJoinPruneInterval,
+              pimInterfaceCBSRPreference, pimInterfaceMode,
+              pimRPSetHoldTime, pimRPSetExpiryTime,
+              pimComponentBSRAddress, pimComponentBSRExpiryTime,
+              pimComponentCRPHoldTime, pimComponentStatus,
+              pimIpMRouteFlags, pimIpMRouteUpstreamAssertTimer
+
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of PIM Sparse
+            Mode (version 2) routers."
+    ::= { pimMIBGroups 2 }
+
+pimDenseV2MIBGroup OBJECT-GROUP
+    OBJECTS { pimNeighborIfIndex,
+              pimNeighborUpTime, pimNeighborExpiryTime,
+              pimInterfaceAddress, pimInterfaceNetMask,
+              pimInterfaceDR, pimInterfaceHelloInterval,
+              pimInterfaceStatus, pimInterfaceMode
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of PIM Dense
+            Mode (version 2) routers."
+    ::= { pimMIBGroups 5 }
+
+pimV2CandidateRPMIBGroup OBJECT-GROUP
+    OBJECTS { pimCandidateRPAddress,
+              pimCandidateRPRowStatus
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support configuration of which
+            groups a router is to advertise itself as a Candidate-RP."
+    ::= { pimMIBGroups 3 }
+
+pimV1MIBGroup OBJECT-GROUP
+    OBJECTS { pimJoinPruneInterval, pimNeighborIfIndex,
+              pimNeighborUpTime, pimNeighborExpiryTime,
+              pimNeighborMode,
+              pimInterfaceAddress, pimInterfaceNetMask,
+              pimInterfaceJoinPruneInterval, pimInterfaceStatus,
+              pimInterfaceMode, pimInterfaceDR,
+              pimInterfaceHelloInterval,
+              pimRPState, pimRPStateTimer,
+              pimRPLastChange, pimRPRowStatus
+            }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects to support management of PIM
+            (version 1) routers."
+    ::= { pimMIBGroups 4 }
+
+pimNextHopGroup OBJECT-GROUP
+
+    OBJECTS { pimIpMRouteNextHopPruneReason }
+    STATUS  current
+    DESCRIPTION
+            "A collection of optional objects to provide per-next hop
+            information for diagnostic purposes.  Supporting this group
+            may add a large number of instances to a tree walk, but the
+            information in this group can be extremely useful in
+            tracking down multicast connectivity problems."
+    ::= { pimMIBGroups 6 }
+
+pimAssertGroup OBJECT-GROUP
+    OBJECTS { pimIpMRouteAssertMetric, pimIpMRouteAssertMetricPref,
+              pimIpMRouteAssertRPTBit }
+    STATUS  current
+    DESCRIPTION
+            "A collection of optional objects to provide extra
+            information about the assert election process.  There is no
+            protocol reason to keep such information, but some
+            implementations may already keep this information and make
+            it available.  These objects can also be very useful in
+            debugging connectivity or duplicate packet problems,
+            especially if the assert winner does not support the PIM and
+            IP Multicast MIBs."
+    ::= { pimMIBGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/PIM-STD-MIB.mib b/snmp_builder/mibs/PIM-STD-MIB.mib
new file mode 100644
index 0000000..dd50f89
--- /dev/null
+++ b/snmp_builder/mibs/PIM-STD-MIB.mib
@@ -0,0 +1,3746 @@
+PIM-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+    NOTIFICATION-TYPE, Unsigned32,
+    Counter32, Counter64, Gauge32,
+    TimeTicks                        FROM SNMPv2-SMI        -- [RFC2578]
+    TEXTUAL-CONVENTION,
+    RowStatus, TruthValue,
+    StorageType                      FROM SNMPv2-TC         -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP               FROM SNMPv2-CONF       -- [RFC2580]
+    InterfaceIndexOrZero,
+    InterfaceIndex                   FROM IF-MIB            -- [RFC2863]
+    InetAddressType,
+    InetAddressPrefixLength,
+    InetAddress, InetVersion         FROM INET-ADDRESS-MIB  -- [RFC4001]
+    IANAipRouteProtocol              FROM IANA-RTPROTO-MIB; -- [RTPROTO]
+
+pimStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200711020000Z" -- 2 November 2007
+    ORGANIZATION
+            "IETF Protocol Independent Multicast (PIM) Working Group"
+    CONTACT-INFO
+            "Email: pim@ietf.org
+            WG charter:
+
+            http://www.ietf.org/html.charters/pim-charter.html"
+    DESCRIPTION
+            "The MIB module for management of PIM routers.
+
+            Copyright (C) The IETF Trust (2007).  This version of this
+            MIB module is part of RFC 5060; see the RFC itself for full
+            legal notices."
+    REVISION     "200711020000Z" -- 2 November 2007
+    DESCRIPTION  "Initial version, published as RFC 5060."
+    ::= { mib-2 157 }
+
+--
+-- Textual Conventions
+--
+
+PimMode ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "The PIM mode in which a group is operating.
+
+            none(1)      The group is not using PIM, which may be the
+                         case if, for example, it is a link-local or
+                         unroutable group address.
+
+            ssm(2)       Source-Specific Multicast (SSM) with PIM Sparse
+                         Mode.
+
+            asm(3)       Any Source Multicast (ASM) with PIM Sparse
+                         Mode.
+
+            bidir(4)     Bidirectional PIM.
+
+            dm(5)        PIM Dense Mode.
+
+            other(6)     Any other PIM mode."
+    SYNTAX     INTEGER {
+                  none(1),
+                  ssm(2),
+                  asm(3),
+                  bidir(4),
+                  dm(5),
+                  other(6)
+               }
+
+PimGroupMappingOriginType ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "The mechanism by which a PIM group mapping was learned.
+
+            fixed(1)     Link-local or unroutable group mappings.
+
+            configRp(2)  Local static RP configuration.
+
+            configSsm(3) Local SSM Group configuration.
+
+            bsr(4)       The PIM Bootstrap Router (BSR) mechanism.
+
+            autoRP(5)    Cisco's Auto-RP mechanism.
+
+            embedded(6)  The Embedded-RP mechanism where the RP address
+                         is embedded in the multicast group address.
+
+            other(7)     Any other mechanism."
+    REFERENCE "RFC 3569, RFC 3956, and RFC 5059"
+    SYNTAX     INTEGER {
+                  fixed(1),
+                  configRp(2),
+                  configSsm(3),
+                  bsr(4),
+                  autoRP(5),
+                  embedded(6),
+                  other(7)
+               }
+
+--
+-- Top-level structure
+--
+
+pimNotifications OBJECT IDENTIFIER ::= { pimStdMIB 0 }
+pim              OBJECT IDENTIFIER ::= { pimStdMIB 1 }
+
+pimKeepalivePeriod OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The duration of the Keepalive Timer.  This is the period
+            during which the PIM router will maintain (S,G) state in the
+            absence of explicit (S,G) local membership or (S,G) join
+            messages received to maintain it.  This timer period is
+            called the Keepalive_Period in the PIM-SM specification.  It
+            is called the SourceLifetime in the PIM-DM specification.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    REFERENCE "RFC 4601 section 4.11"
+    DEFVAL { 210 }
+    ::= { pim 14 }
+
+pimRegisterSuppressionTime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The duration of the Register Suppression Timer.  This is
+            the period during which a PIM Designated Router (DR) stops
+            sending Register-encapsulated data to the Rendezvous Point
+            (RP) after receiving a Register-Stop message.  This object
+            is used to run timers both at the DR and at the RP.  This
+            timer period is called the Register_Suppression_Time in the
+            PIM-SM specification.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    REFERENCE "RFC 4601 section 4.11"
+    DEFVAL { 60 }
+    ::= { pim 15 }
+
+pimStarGEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of entries in the pimStarGTable."
+    ::= { pim 16 }
+
+pimStarGIEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of entries in the pimStarGITable."
+    ::= { pim 17 }
+
+pimSGEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of entries in the pimSGTable."
+    ::= { pim 18 }
+
+pimSGIEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of entries in the pimSGITable."
+    ::= { pim 19 }
+
+pimSGRptEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of entries in the pimSGRptTable."
+    ::= { pim 20 }
+
+pimSGRptIEntries OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of entries in the pimSGRptITable."
+    ::= { pim 21 }
+
+pimOutAsserts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Asserts sent by this router.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 4601 section 4.6"
+    ::= { pim 22 }
+
+pimInAsserts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of Asserts received by this router.  Asserts
+            are multicast to all routers on a network.  This counter is
+            incremented by all routers that receive an assert, not only
+            those routers that are contesting the assert.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 4601 section 4.6"
+    ::= { pim 23 }
+
+pimLastAssertInterface OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The interface on which this router most recently sent or
+            received an assert, or zero if this router has not sent or
+            received an assert."
+    REFERENCE "RFC 4601 section 4.6"
+    ::= { pim 24 }
+
+pimLastAssertGroupAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the multicast group address in the most
+            recently sent or received assert.  If this router has not
+            sent or received an assert, then this object is set to
+            unknown(0)."
+    ::= { pim 25 }
+
+pimLastAssertGroupAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address in the most recently sent or
+            received assert.  The InetAddressType is given by the
+            pimLastAssertGroupAddressType object."
+    ::= { pim 26 }
+
+pimLastAssertSourceAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the source address in the most recently
+            sent or received assert.  If the most recent assert was
+            (*,G), or if this router has not sent or received an assert,
+            then this object is set to unknown(0)."
+    ::= { pim 27 }
+
+pimLastAssertSourceAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The source address in the most recently sent or received
+            assert.  The InetAddressType is given by the
+            pimLastAssertSourceAddressType object."
+    ::= { pim 28 }
+
+pimNeighborLossNotificationPeriod OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The minimum time that must elapse between pimNeighborLoss
+            notifications originated by this router.  The maximum value
+            65535 represents an 'infinite' time, in which case, no
+            pimNeighborLoss notifications are ever sent.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    DEFVAL { 0 }
+    ::= { pim 29 }
+
+pimNeighborLossCount OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of neighbor loss events that have occurred.
+
+            This counter is incremented when the neighbor timer expires,
+            and the router has no other neighbors on the same interface
+            with the same IP version and a lower IP address than itself.
+
+            This counter is incremented whenever a pimNeighborLoss
+            notification would be generated.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 4601 section 4.3.2"
+    ::= { pim 30 }
+
+pimInvalidRegisterNotificationPeriod OBJECT-TYPE
+    SYNTAX     Unsigned32 (10..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The minimum time that must elapse between
+            pimInvalidRegister notifications originated by this router.
+            The default value of 65535 represents an 'infinite' time, in
+            which case, no pimInvalidRegister notifications are ever
+            sent.
+
+            The non-zero minimum allowed value provides resilience
+            against propagation of denial-of-service attacks from the
+            data and control planes to the network management plane.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    DEFVAL { 65535 }
+    ::= { pim 31 }
+
+pimInvalidRegisterMsgsRcvd OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of invalid PIM Register messages that have been
+            received by this device.
+
+            A PIM Register message is invalid if either
+
+            o the destination address of the Register message does not
+              match the Group to RP mapping on this device, or
+
+            o this device believes the group address to be within an
+              SSM address range, but this Register implies ASM usage.
+
+            These conditions can occur transiently while RP mapping
+            changes propagate through the network.  If this counter is
+            incremented repeatedly over several minutes, then there is a
+            persisting configuration error that requires correction.
+
+            The active Group to RP mapping on this device is specified
+            by the object pimGroupMappingPimMode.  If there is no such
+            mapping, then the object pimGroupMappingPimMode is absent.
+            The RP address contained in the invalid Register is
+            pimInvalidRegisterRp.
+
+            Multicast data carried by invalid Register messages is
+            discarded.  The discarded data is from a source directly
+
+            connected to pimInvalidRegisterOrigin, and is addressed to
+            pimInvalidRegisterGroup.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 4601 section 4.4.2, RFC 3569, and
+               'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable"
+    ::= { pim 32 }
+
+pimInvalidRegisterAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type stored in pimInvalidRegisterOrigin,
+            pimInvalidRegisterGroup, and pimInvalidRegisterRp.
+
+            If no invalid Register messages have been received, then
+            this object is set to unknown(0)."
+    ::= { pim 33 }
+
+pimInvalidRegisterOrigin OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The source address of the last invalid Register message
+            received by this device."
+    ::= { pim 34 }
+
+pimInvalidRegisterGroup OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address to which the last invalid
+            Register message received by this device was addressed."
+    ::= { pim 35 }
+
+pimInvalidRegisterRp OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The RP address to which the last invalid Register message
+            received by this device was delivered."
+    ::= { pim 36 }
+
+pimInvalidJoinPruneNotificationPeriod OBJECT-TYPE
+    SYNTAX     Unsigned32 (10..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The minimum time that must elapse between
+            pimInvalidJoinPrune notifications originated by this router.
+            The default value of 65535 represents an 'infinite' time, in
+            which case, no pimInvalidJoinPrune notifications are ever
+            sent.
+
+            The non-zero minimum allowed value provides resilience
+            against propagation of denial-of-service attacks from the
+            control plane to the network management plane.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    DEFVAL { 65535 }
+    ::= { pim 37 }
+
+pimInvalidJoinPruneMsgsRcvd OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of invalid PIM Join/Prune messages that have
+            been received by this device.
+
+            A PIM Join/Prune message is invalid if either
+
+            o the Group to RP mapping specified by this message does not
+              match the Group to RP mapping on this device, or
+
+            o this device believes the group address to be within an
+              SSM address range, but this Join/Prune (*,G) or (S,G,rpt)
+              implies ASM usage.
+
+            These conditions can occur transiently while RP mapping
+            changes propagate through the network.  If this counter is
+            incremented repeatedly over several minutes, then there is a
+            persisting configuration error that requires correction.
+
+            The active Group to RP mapping on this device is specified
+            by the object pimGroupMappingPimMode.  If there is no such
+            mapping, then the object pimGroupMappingPimMode is absent.
+            The RP address contained in the invalid Join/Prune is
+            pimInvalidJoinPruneRp.
+
+            Invalid Join/Prune messages are discarded.  This may result
+            in loss of multicast data affecting listeners downstream of
+            pimInvalidJoinPruneOrigin, for multicast data addressed to
+            pimInvalidJoinPruneGroup.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 4601 section 4.5.2, RFC 3569, and
+               'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable"
+    ::= { pim 38 }
+
+pimInvalidJoinPruneAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type stored in pimInvalidJoinPruneOrigin,
+            pimInvalidJoinPruneGroup, and pimInvalidJoinPruneRp.
+
+            If no invalid Join/Prune messages have been received, this
+            object is set to unknown(0)."
+    ::= { pim 39 }
+
+pimInvalidJoinPruneOrigin OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The source address of the last invalid Join/Prune message
+            received by this device."
+    ::= { pim 40 }
+
+pimInvalidJoinPruneGroup OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address carried in the last
+            invalid Join/Prune message received by this device."
+    ::= { pim 41 }
+
+pimInvalidJoinPruneRp OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The RP address carried in the last invalid Join/Prune
+
+            message received by this device."
+    ::= { pim 42 }
+
+pimRPMappingNotificationPeriod OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The minimum time that must elapse between
+            pimRPMappingChange notifications originated by this router.
+            The default value of 65535 represents an 'infinite' time, in
+            which case, no pimRPMappingChange notifications are ever
+            sent.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    DEFVAL { 65535 }
+    ::= { pim 43 }
+
+pimRPMappingChangeCount OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of changes to active RP mappings on this device.
+
+            Information about active RP mappings is available in
+            pimGroupMappingTable.  Only changes to active mappings cause
+            this counter to be incremented.  That is, changes that
+            modify the pimGroupMappingEntry with the highest precedence
+            for a group (lowest value of pimGroupMappingPrecedence).
+
+            Such changes may result from manual configuration of this
+            device, or from automatic RP mapping discovery methods
+            including the PIM Bootstrap Router (BSR) mechanism.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 5059"
+    ::= { pim 44 }
+
+pimInterfaceElectionNotificationPeriod OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The minimum time that must elapse between
+            pimInterfaceElection notifications originated by this
+            router.  The default value of 65535 represents an 'infinite'
+            time, in which case, no pimInterfaceElection notifications
+            are ever sent.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    DEFVAL { 65535 }
+    ::= { pim 45 }
+
+pimInterfaceElectionWinCount OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times this device has been elected DR or DF
+            on any interface.
+
+            Elections occur frequently on newly-active interfaces, as
+            triggered Hellos establish adjacencies.  This counter is not
+            incremented for elections on an interface until the first
+            periodic Hello has been sent.  If this router is the DR or
+            DF at the time of sending the first periodic Hello after
+            interface activation, then this counter is incremented
+            (once) at that time.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, for example,
+            when the device is rebooted."
+    REFERENCE "RFC 4601 section 4.3.2 and RFC 5015 section 3.5.2"
+    ::= { pim 46 }
+
+pimRefreshInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The interval between successive State Refresh messages sent
+            by an Originator.  This timer period is called the
+            RefreshInterval in the PIM-DM specification.  This object is
+            used only by PIM-DM.
+
+            The storage type of this object is determined by
+            pimDeviceConfigStorageType."
+    REFERENCE "RFC 3973 section 4.8"
+    DEFVAL { 60 }
+    ::= { pim 47 }
+
+pimDeviceConfigStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The storage type used for the global PIM configuration of
+            this device, comprised of the objects listed below.  If this
+            storage type takes the value 'permanent', write-access to
+            the listed objects need not be allowed.
+
+            The objects described by this storage type are:
+            pimKeepalivePeriod, pimRegisterSuppressionTime,
+            pimNeighborLossNotificationPeriod,
+            pimInvalidRegisterNotificationPeriod,
+            pimInvalidJoinPruneNotificationPeriod,
+            pimRPMappingNotificationPeriod,
+            pimInterfaceElectionNotificationPeriod, and
+            pimRefreshInterval."
+    DEFVAL { nonVolatile }
+    ::= { pim 48 }
+
+--
+-- The PIM Interface Table
+--
+
+pimInterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the router's PIM interfaces.
+            PIM is enabled on all interfaces listed in this table."
+    ::= { pim 1 }
+
+pimInterfaceEntry OBJECT-TYPE
+    SYNTAX     PimInterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimInterfaceTable.  This
+            entry is preserved on agent restart."
+    INDEX      { pimInterfaceIfIndex,
+                 pimInterfaceIPVersion }
+    ::= { pimInterfaceTable 1 }
+
+PimInterfaceEntry ::= SEQUENCE {
+    pimInterfaceIfIndex              InterfaceIndex,
+    pimInterfaceIPVersion            InetVersion,
+    pimInterfaceAddressType          InetAddressType,
+    pimInterfaceAddress              InetAddress,
+    pimInterfaceGenerationIDValue    Unsigned32,
+    pimInterfaceDR                   InetAddress,
+    pimInterfaceDRPriority           Unsigned32,
+    pimInterfaceDRPriorityEnabled    TruthValue,
+    pimInterfaceHelloInterval        Unsigned32,
+    pimInterfaceTrigHelloInterval    Unsigned32,
+    pimInterfaceHelloHoldtime        Unsigned32,
+    pimInterfaceJoinPruneInterval    Unsigned32,
+    pimInterfaceJoinPruneHoldtime    Unsigned32,
+    pimInterfaceDFElectionRobustness Unsigned32,
+    pimInterfaceLanDelayEnabled      TruthValue,
+    pimInterfacePropagationDelay     Unsigned32,
+    pimInterfaceOverrideInterval     Unsigned32,
+    pimInterfaceEffectPropagDelay    Unsigned32,
+    pimInterfaceEffectOverrideIvl    Unsigned32,
+    pimInterfaceSuppressionEnabled   TruthValue,
+    pimInterfaceBidirCapable         TruthValue,
+    pimInterfaceDomainBorder         TruthValue,
+    pimInterfaceStubInterface        TruthValue,
+    pimInterfacePruneLimitInterval   Unsigned32,
+    pimInterfaceGraftRetryInterval   Unsigned32,
+    pimInterfaceSRPriorityEnabled    TruthValue,
+    pimInterfaceStatus               RowStatus,
+    pimInterfaceStorageType          StorageType
+}
+
+pimInterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex value of this PIM interface."
+    ::= { pimInterfaceEntry 1 }
+
+pimInterfaceIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP version of this PIM interface.  A physical interface
+            may be configured in multiple modes concurrently, e.g., IPv4
+            and IPv6; however, the traffic is considered to be logically
+            separate."
+    ::= { pimInterfaceEntry 2 }
+
+pimInterfaceAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of this PIM interface."
+    ::= { pimInterfaceEntry 3 }
+
+pimInterfaceAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary IP address of this router on this PIM
+            interface.  The InetAddressType is given by the
+            pimInterfaceAddressType object."
+    REFERENCE "RFC 4601 sections 4.1.6, 4.3.1-4.3.4, and 4.5.1"
+    ::= { pimInterfaceEntry 4 }
+
+pimInterfaceGenerationIDValue OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the Generation ID this router inserted in the
+            last PIM Hello message it sent on this interface."
+    REFERENCE "RFC 4601 section 4.3.1"
+    ::= { pimInterfaceEntry 5 }
+
+pimInterfaceDR OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary IP address of the Designated Router on this PIM
+            interface.  The InetAddressType is given by the
+            pimInterfaceAddressType object."
+    REFERENCE "RFC 4601 section 4.3"
+    ::= { pimInterfaceEntry 6 }
+
+pimInterfaceDRPriority OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The Designated Router Priority value inserted into the DR
+
+            Priority option in PIM Hello messages transmitted on this
+            interface.  Numerically higher values for this object
+            indicate higher priorities."
+    REFERENCE "RFC 4601 section 4.3.2"
+    DEFVAL { 1 }
+    ::= { pimInterfaceEntry 7 }
+
+pimInterfaceDRPriorityEnabled OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if all routers on this interface are
+            using the DR Priority option."
+    REFERENCE "RFC 4601 section 4.3.2"
+    ::= { pimInterfaceEntry 8 }
+
+pimInterfaceHelloInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..18000)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which PIM Hello messages are transmitted
+            on this interface.  This object corresponds to the
+            'Hello_Period' timer value defined in the PIM-SM
+            specification.  A value of zero represents an 'infinite'
+            interval, and indicates that periodic PIM Hello messages
+            should not be sent on this interface."
+    REFERENCE "RFC 4601 section 9"
+    DEFVAL { 30 }
+    ::= { pimInterfaceEntry 9 }
+
+pimInterfaceTrigHelloInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..60)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The maximum time before this router sends a triggered PIM
+            Hello message on this interface.  This object corresponds to
+            the 'Trigered_Hello_Delay' timer value defined in the PIM-SM
+            specification.  A value of zero has no special meaning and
+            indicates that triggered PIM Hello messages should always be
+            sent immediately."
+    REFERENCE "RFC 4601 section 4.11"
+    DEFVAL { 5 }
+    ::= { pimInterfaceEntry 10 }
+
+pimInterfaceHelloHoldtime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The value set in the Holdtime field of PIM Hello messages
+            transmitted on this interface.  A value of 65535 represents
+            an 'infinite' holdtime.  Implementations are recommended
+            to use a holdtime that is 3.5 times the value of
+            pimInterfaceHelloInterval, or 65535 if
+            pimInterfaceHelloInterval is set to zero."
+    REFERENCE "RFC 4601 sections 4.3.2 and 4.9.2"
+    DEFVAL { 105 }
+    ::= { pimInterfaceEntry 11 }
+
+pimInterfaceJoinPruneInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..18000)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The frequency at which this router sends PIM Join/Prune
+            messages on this PIM interface.  This object corresponds to
+            the 't_periodic' timer value defined in the PIM-SM
+            specification.  A value of zero represents an 'infinite'
+            interval, and indicates that periodic PIM Join/Prune
+            messages should not be sent on this interface."
+    REFERENCE "RFC 4601 section 4.11"
+    DEFVAL { 60 }
+    ::= { pimInterfaceEntry 12 }
+
+pimInterfaceJoinPruneHoldtime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The value inserted into the Holdtime field of a PIM
+            Join/Prune message sent on this interface.  A value of 65535
+            represents an 'infinite' holdtime.  Implementations are
+            recommended to use a holdtime that is 3.5 times the value of
+            pimInterfaceJoinPruneInterval, or 65535 if
+            pimInterfaceJoinPruneInterval is set to zero.  PIM-DM
+            implementations are recommended to use the value of
+            pimInterfacePruneLimitInterval."
+    REFERENCE "RFC 4601 sections 4.5.3 and 4.9.5"
+    DEFVAL { 210 }
+    ::= { pimInterfaceEntry 13 }
+
+pimInterfaceDFElectionRobustness OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The minimum number of PIM DF-Election messages that must be
+            lost in order for DF election on this interface to fail."
+    DEFVAL { 3 }
+    ::= { pimInterfaceEntry 14 }
+
+pimInterfaceLanDelayEnabled OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if all routers on this interface are
+            using the LAN Prune Delay option."
+    REFERENCE "RFC 4601 sections 4.3.3 and 4.9.2"
+    ::= { pimInterfaceEntry 15 }
+
+pimInterfacePropagationDelay OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..32767)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The expected propagation delay between PIM routers on this
+            network or link.
+
+            This router inserts this value into the Propagation_Delay
+            field of the LAN Prune Delay option in the PIM Hello
+            messages sent on this interface.  Implementations SHOULD
+            enforce a lower bound on the permitted values for this
+            object to allow for scheduling and processing delays within
+            the local router."
+    DEFVAL { 500 }
+    ::= { pimInterfaceEntry 16 }
+
+pimInterfaceOverrideInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The value this router inserts into the Override_Interval
+            field of the LAN Prune Delay option in the PIM Hello
+
+            messages it sends on this interface.
+
+            When overriding a prune, PIM routers pick a random timer
+            duration up to the value of this object.  The more PIM
+            routers that are active on a network, the more likely it is
+            that the prune will be overridden after a small proportion
+            of this time has elapsed.
+
+            The more PIM routers are active on this network, the larger
+            this object should be to obtain an optimal spread of prune
+            override latencies."
+    REFERENCE "RFC 4601 section 4.3.3"
+    DEFVAL { 2500 }
+    ::= { pimInterfaceEntry 17 }
+
+pimInterfaceEffectPropagDelay OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..32767)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The Effective Propagation Delay on this interface.  This
+            object is always 500 if pimInterfaceLanDelayEnabled is
+            FALSE."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimInterfaceEntry 18 }
+
+pimInterfaceEffectOverrideIvl OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The Effective Override Interval on this interface.  This
+            object is always 2500 if pimInterfaceLanDelayEnabled is
+            FALSE."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimInterfaceEntry 19 }
+
+pimInterfaceSuppressionEnabled OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether join suppression is enabled on this interface.
+            This object is always TRUE if pimInterfaceLanDelayEnabled is
+            FALSE."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimInterfaceEntry 20 }
+
+pimInterfaceBidirCapable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if all routers on this interface are
+            using the Bidirectional-PIM Capable option."
+    REFERENCE "RFC 5015 section 3.2 and 3.7.4"
+    ::= { pimInterfaceEntry 21 }
+
+pimInterfaceDomainBorder OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Whether or not this interface is a PIM domain border.  This
+            includes acting as a border for PIM Bootstrap Router (BSR)
+            messages, if the BSR mechanism is in use."
+    DEFVAL { false }
+    ::= { pimInterfaceEntry 22 }
+
+pimInterfaceStubInterface OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Whether this interface is a 'stub interface'.  If this
+            object is set to TRUE, then no PIM packets are sent out this
+            interface, and any received PIM packets are ignored.
+
+            Setting this object to TRUE is a security measure for
+            interfaces towards untrusted hosts.  This allows an
+            interface to be configured for use with IGMP (Internet Group
+            Management Protocol) or MLD (Multicast Listener Discovery)
+            only, which protects the PIM router from forged PIM messages
+            on the interface.
+
+            To communicate with other PIM routers using this interface,
+            this object must remain set to FALSE.
+
+            Changing the value of this object while the interface is
+            operational causes PIM to be disabled and then re-enabled on
+            this interface."
+    REFERENCE "RFC 3376, RFC 3810"
+    DEFVAL { false }
+    ::= { pimInterfaceEntry 23 }
+
+pimInterfacePruneLimitInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The minimum interval that must transpire between two
+            successive Prunes sent by a router.  This object corresponds
+            to the 't_limit' timer value defined in the PIM-DM
+            specification.  This object is used only by PIM-DM."
+    REFERENCE "RFC 3973 section 4.8"
+    DEFVAL { 60 }
+    ::= { pimInterfaceEntry 24 }
+
+pimInterfaceGraftRetryInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The minimum interval that must transpire between two
+            successive Grafts sent by a router.  This object corresponds
+            to the 'Graft_Retry_Period' timer value defined in the
+            PIM-DM specification.  This object is used only by PIM-DM."
+    REFERENCE "RFC 3973 section 4.8"
+    DEFVAL { 3 }
+    ::= { pimInterfaceEntry 25 }
+
+pimInterfaceSRPriorityEnabled OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if all routers on this interface are
+            using the State Refresh option.  This object is used only by
+            PIM-DM."
+    ::= { pimInterfaceEntry 26 }
+
+pimInterfaceStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this entry.  Creating the entry enables PIM
+            on the interface; destroying the entry disables PIM on the
+            interface.
+
+            This status object can be set to active(1) without setting
+
+            any other columnar objects in this entry.
+
+            All writeable objects in this entry can be modified when the
+            status of this entry is active(1)."
+    ::= { pimInterfaceEntry 27 }
+
+pimInterfaceStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The storage type for this row.  Rows having the value
+            'permanent' need not allow write-access to any columnar
+            objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { pimInterfaceEntry 28 }
+
+--
+-- The PIM Neighbor Table
+--
+
+pimNeighborTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimNeighborEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the router's PIM neighbors."
+    ::= { pim 2 }
+
+pimNeighborEntry OBJECT-TYPE
+    SYNTAX     PimNeighborEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimNeighborTable."
+    INDEX      { pimNeighborIfIndex,
+                 pimNeighborAddressType,
+                 pimNeighborAddress }
+    ::= { pimNeighborTable 1 }
+
+PimNeighborEntry ::= SEQUENCE {
+    pimNeighborIfIndex              InterfaceIndex,
+    pimNeighborAddressType          InetAddressType,
+    pimNeighborAddress              InetAddress,
+    pimNeighborGenerationIDPresent  TruthValue,
+    pimNeighborGenerationIDValue    Unsigned32,
+    pimNeighborUpTime               TimeTicks,
+    pimNeighborExpiryTime           TimeTicks,
+    pimNeighborDRPriorityPresent    TruthValue,
+    pimNeighborDRPriority           Unsigned32,
+    pimNeighborLanPruneDelayPresent TruthValue,
+    pimNeighborTBit                 TruthValue,
+    pimNeighborPropagationDelay     Unsigned32,
+    pimNeighborOverrideInterval     Unsigned32,
+    pimNeighborBidirCapable         TruthValue,
+    pimNeighborSRCapable            TruthValue
+}
+
+pimNeighborIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface used to reach this
+            PIM neighbor."
+    ::= { pimNeighborEntry 1 }
+
+pimNeighborAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of this PIM neighbor."
+    ::= { pimNeighborEntry 2 }
+
+pimNeighborAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The primary IP address of this PIM neighbor.  The
+            InetAddressType is given by the pimNeighborAddressType
+            object."
+    ::= { pimNeighborEntry 3 }
+
+pimNeighborGenerationIDPresent OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if this neighbor is using the Generation
+            ID option."
+    REFERENCE "RFC 4601 section 4.3.1"
+    ::= { pimNeighborEntry 4 }
+
+pimNeighborGenerationIDValue OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the Generation ID from the last PIM Hello
+            message received from this neighbor.  This object is always
+            zero if pimNeighborGenerationIDPresent is FALSE."
+    REFERENCE "RFC 4601 section 4.3.1"
+    ::= { pimNeighborEntry 5 }
+
+pimNeighborUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this PIM neighbor (last) became a neighbor
+            of the local router."
+    ::= { pimNeighborEntry 6 }
+
+pimNeighborExpiryTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining before this PIM neighbor will
+            time out.  The value zero indicates that this PIM neighbor
+            will never time out."
+    ::= { pimNeighborEntry 7 }
+
+pimNeighborDRPriorityPresent OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if this neighbor is using the DR Priority
+            option."
+    REFERENCE "RFC 4601 section 4.3.2"
+    ::= { pimNeighborEntry 8 }
+
+pimNeighborDRPriority OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the Designated Router Priority from the last
+            PIM Hello message received from this neighbor.  This object
+            is always zero if pimNeighborDRPriorityPresent is FALSE."
+    REFERENCE "RFC 4601 section 4.3.2"
+    ::= { pimNeighborEntry 9 }
+
+pimNeighborLanPruneDelayPresent OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if this neighbor is using the LAN Prune
+            Delay option."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimNeighborEntry 10 }
+
+pimNeighborTBit OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the T bit was set in the LAN Prune Delay option
+            received from this neighbor.  The T bit specifies the
+            ability of the neighbor to disable join suppression.  This
+            object is always TRUE if pimNeighborLanPruneDelayPresent is
+            FALSE."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimNeighborEntry 11 }
+
+pimNeighborPropagationDelay OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..32767)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the Propagation_Delay field of the LAN Prune
+            Delay option received from this neighbor.  This object is
+            always zero if pimNeighborLanPruneDelayPresent is FALSE."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimNeighborEntry 12 }
+
+pimNeighborOverrideInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the Override_Interval field of the LAN Prune
+            Delay option received from this neighbor.  This object is
+            always zero if pimNeighborLanPruneDelayPresent is FALSE."
+    REFERENCE "RFC 4601 section 4.3.3"
+    ::= { pimNeighborEntry 13 }
+
+pimNeighborBidirCapable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if this neighbor is using the
+            Bidirectional-PIM Capable option."
+    REFERENCE "RFC 5015 section 3.2 and 3.7.4"
+    ::= { pimNeighborEntry 14 }
+
+pimNeighborSRCapable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Evaluates to TRUE if this neighbor is using the State
+            Refresh Capable option.  This object is used only by
+            PIM-DM."
+    REFERENCE "RFC 3973 section 4.3.4"
+    ::= { pimNeighborEntry 15 }
+
+--
+-- The PIM Neighbor Secondary Address Table
+--
+
+pimNbrSecAddressTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimNbrSecAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the secondary addresses
+            advertised by each PIM neighbor (on a subset of the rows of
+            the pimNeighborTable defined above)."
+    REFERENCE "RFC 4601 section 4.3.4"
+    ::= { pim 3 }
+
+pimNbrSecAddressEntry OBJECT-TYPE
+    SYNTAX     PimNbrSecAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimNbrSecAddressTable."
+    INDEX      { pimNbrSecAddressIfIndex,
+                 pimNbrSecAddressType,
+                 pimNbrSecAddressPrimary,
+                 pimNbrSecAddress }
+    ::= { pimNbrSecAddressTable 1 }
+
+PimNbrSecAddressEntry ::= SEQUENCE {
+
+    pimNbrSecAddressIfIndex InterfaceIndex,
+    pimNbrSecAddressType    InetAddressType,
+    pimNbrSecAddressPrimary InetAddress,
+    pimNbrSecAddress        InetAddress
+}
+
+pimNbrSecAddressIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface used to reach this
+            PIM neighbor."
+    ::= { pimNbrSecAddressEntry 1 }
+
+pimNbrSecAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of this PIM neighbor."
+    ::= { pimNbrSecAddressEntry 2 }
+
+pimNbrSecAddressPrimary OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The primary IP address of this PIM neighbor.  The
+            InetAddressType is given by the pimNbrSecAddressType
+            object."
+    ::= { pimNbrSecAddressEntry 3 }
+
+pimNbrSecAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The secondary IP address of this PIM neighbor.  The
+            InetAddressType is given by the pimNbrSecAddressType
+            object."
+    ::= { pimNbrSecAddressEntry 4 }
+
+--
+-- The PIM (*,G) State Table
+--
+
+pimStarGTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimStarGEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the non-interface specific
+            (*,G) state that PIM has."
+    REFERENCE "RFC 4601 section 4.1.3"
+    ::= { pim 4 }
+
+pimStarGEntry OBJECT-TYPE
+    SYNTAX     PimStarGEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimStarGTable."
+    INDEX      { pimStarGAddressType,
+                 pimStarGGrpAddress }
+    ::= { pimStarGTable 1 }
+
+PimStarGEntry ::= SEQUENCE {
+    pimStarGAddressType             InetAddressType,
+    pimStarGGrpAddress              InetAddress,
+    pimStarGUpTime                  TimeTicks,
+    pimStarGPimMode                 PimMode,
+    pimStarGRPAddressType           InetAddressType,
+    pimStarGRPAddress               InetAddress,
+    pimStarGPimModeOrigin           PimGroupMappingOriginType,
+    pimStarGRPIsLocal               TruthValue,
+    pimStarGUpstreamJoinState       INTEGER,
+    pimStarGUpstreamJoinTimer       TimeTicks,
+    pimStarGUpstreamNeighborType    InetAddressType,
+    pimStarGUpstreamNeighbor        InetAddress,
+    pimStarGRPFIfIndex              InterfaceIndexOrZero,
+    pimStarGRPFNextHopType          InetAddressType,
+    pimStarGRPFNextHop              InetAddress,
+    pimStarGRPFRouteProtocol        IANAipRouteProtocol,
+    pimStarGRPFRouteAddress         InetAddress,
+    pimStarGRPFRoutePrefixLength    InetAddressPrefixLength,
+    pimStarGRPFRouteMetricPref      Unsigned32,
+    pimStarGRPFRouteMetric          Unsigned32
+}
+
+pimStarGAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of this multicast group."
+    ::= { pimStarGEntry 1 }
+
+pimStarGGrpAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address.  The InetAddressType is given
+            by the pimStarGAddressType object."
+    ::= { pimStarGEntry 2 }
+
+pimStarGUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this entry was created by the local router."
+    ::= { pimStarGEntry 3 }
+
+pimStarGPimMode OBJECT-TYPE
+    SYNTAX     PimMode { asm(3), bidir(4) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether this entry represents an ASM (Any Source Multicast,
+            used with PIM-SM) or BIDIR-PIM group."
+    ::= { pimStarGEntry 4 }
+
+pimStarGRPAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the Rendezvous Point (RP), or
+            unknown(0) if the RP address is unknown."
+    ::= { pimStarGEntry 5 }
+
+pimStarGRPAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the Rendezvous Point (RP) for the group.
+            The InetAddressType is given by the pimStarGRPAddressType."
+    ::= { pimStarGEntry 6 }
+
+pimStarGPimModeOrigin OBJECT-TYPE
+    SYNTAX     PimGroupMappingOriginType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The mechanism by which the PIM mode and RP for the group
+            were learned."
+    ::= { pimStarGEntry 7 }
+
+pimStarGRPIsLocal OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router is the RP for the group."
+    ::= { pimStarGEntry 8 }
+
+pimStarGUpstreamJoinState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  notJoined (1),
+                  joined (2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router should join the RP tree for the
+            group.  This corresponds to the state of the upstream (*,G)
+            state machine in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.5.6"
+    ::= { pimStarGEntry 9 }
+
+pimStarGUpstreamJoinTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router next sends a
+            periodic (*,G) Join message on pimStarGRPFIfIndex.  This
+            timer is called the (*,G) Upstream Join Timer in the PIM-SM
+            specification.  This object is zero if the timer is not
+            running."
+    REFERENCE "RFC 4601 section 4.10"
+    ::= { pimStarGEntry 10 }
+
+pimStarGUpstreamNeighborType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary address type of the upstream neighbor, or
+
+            unknown(0) if the upstream neighbor address is unknown or is
+            not a PIM neighbor."
+    ::= { pimStarGEntry 11 }
+
+pimStarGUpstreamNeighbor OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary address of the neighbor on pimStarGRPFIfIndex
+            that the local router is sending periodic (*,G) Join
+            messages to.  The InetAddressType is given by the
+            pimStarGUpstreamNeighborType object.  This address is called
+            RPF'(*,G) in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.1.6"
+    ::= { pimStarGEntry 12 }
+
+pimStarGRPFIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the Reverse Path Forwarding
+            (RPF) interface towards the RP, or zero if the RPF
+            interface is unknown."
+    ::= { pimStarGEntry 13 }
+
+pimStarGRPFNextHopType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the RPF next hop towards the RP, or
+            unknown(0) if the RPF next hop is unknown."
+    ::= { pimStarGEntry 14 }
+
+pimStarGRPFNextHop OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the RPF next hop towards the RP.  The
+            InetAddressType is given by the pimStarGRPFNextHopType
+            object.  This address is called MRIB.next_hop(RP(G))
+            in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.5.5"
+    ::= { pimStarGEntry 15 }
+
+pimStarGRPFRouteProtocol OBJECT-TYPE
+    SYNTAX     IANAipRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which the route used to find the
+            RPF interface towards the RP was learned."
+    ::= { pimStarGEntry 16 }
+
+pimStarGRPFRouteAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address that, when combined with the corresponding
+            value of pimStarGRPFRoutePrefixLength, identifies the route
+            used to find the RPF interface towards the RP.  The
+            InetAddressType is given by the pimStarGRPFNextHopType
+            object.
+
+            This address object is only significant up to
+            pimStarGRPFRoutePrefixLength bits.  The remainder of the
+            address bits are zero."
+    ::= { pimStarGEntry 17 }
+
+pimStarGRPFRoutePrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The prefix length that, when combined with the
+            corresponding value of pimStarGRPFRouteAddress, identifies
+            the route used to find the RPF interface towards the RP.
+            The InetAddressType is given by the pimStarGRPFNextHopType
+            object."
+    ::= { pimStarGEntry 18 }
+
+pimStarGRPFRouteMetricPref OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The metric preference of the route used to find the RPF
+            interface towards the RP."
+    ::= { pimStarGEntry 19 }
+
+pimStarGRPFRouteMetric OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing metric of the route used to find the RPF
+            interface towards the RP."
+    ::= { pimStarGEntry 20 }
+
+--
+-- The PIM (*,G,I) State Table
+--
+
+pimStarGITable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimStarGIEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interface-specific (*,G)
+            state that PIM has."
+    REFERENCE "RFC 4601 section 4.1.3"
+    ::= { pim 5 }
+
+pimStarGIEntry OBJECT-TYPE
+    SYNTAX     PimStarGIEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimStarGITable."
+    INDEX      { pimStarGAddressType,
+                 pimStarGGrpAddress,
+                 pimStarGIIfIndex }
+    ::= { pimStarGITable 1 }
+
+PimStarGIEntry ::= SEQUENCE {
+    pimStarGIIfIndex                 InterfaceIndex,
+    pimStarGIUpTime                  TimeTicks,
+    pimStarGILocalMembership         TruthValue,
+    pimStarGIJoinPruneState          INTEGER,
+    pimStarGIPrunePendingTimer       TimeTicks,
+    pimStarGIJoinExpiryTimer         TimeTicks,
+    pimStarGIAssertState             INTEGER,
+    pimStarGIAssertTimer             TimeTicks,
+    pimStarGIAssertWinnerAddressType InetAddressType,
+    pimStarGIAssertWinnerAddress     InetAddress,
+    pimStarGIAssertWinnerMetricPref  Unsigned32,
+    pimStarGIAssertWinnerMetric      Unsigned32
+}
+
+pimStarGIIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex of the interface that this entry corresponds
+            to."
+    ::= { pimStarGIEntry 1 }
+
+pimStarGIUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this entry was created by the local router."
+    ::= { pimStarGIEntry 2 }
+
+pimStarGILocalMembership OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router has (*,G) local membership on this
+            interface (resulting from a mechanism such as IGMP or MLD).
+            This corresponds to local_receiver_include(*,G,I) in the
+            PIM-SM specification."
+    REFERENCE "RFC 3376, RFC 3810, and RFC 4601 section 4.1.6"
+    ::= { pimStarGIEntry 3 }
+
+pimStarGIJoinPruneState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  noInfo (1),
+                  join (2),
+                  prunePending (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The state resulting from (*,G) Join/Prune messages
+            received on this interface.  This corresponds to the state
+            of the downstream per-interface (*,G) state machine in the
+            PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.5.2"
+    ::= { pimStarGIEntry 4 }
+
+pimStarGIPrunePendingTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router acts on a (*,G)
+            Prune message received on this interface, during which the
+            router is waiting to see whether another downstream router
+            will override the Prune message.  This timer is called the
+            (*,G) Prune-Pending Timer in the PIM-SM specification.  This
+            object is zero if the timer is not running."
+    REFERENCE "RFC 4601 section 4.5.1"
+    ::= { pimStarGIEntry 5 }
+
+pimStarGIJoinExpiryTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before (*,G) Join state for this
+            interface expires.  This timer is called the (*,G) Join
+            Expiry Timer in the PIM-SM specification.  This object is
+            zero if the timer is not running.  A value of 'FFFFFFFF'h
+            indicates an infinite expiry time."
+    REFERENCE "RFC 4601 section 4.10"
+    ::= { pimStarGIEntry 6 }
+
+pimStarGIAssertState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  noInfo (1),
+                  iAmAssertWinner (2),
+                  iAmAssertLoser (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The (*,G) Assert state for this interface.  This
+            corresponds to the state of the per-interface (*,G) Assert
+            state machine in the PIM-SM specification.  If
+            pimStarGPimMode is 'bidir', this object must be 'noInfo'."
+    REFERENCE "RFC 4601 section 4.6.2"
+    ::= { pimStarGIEntry 7 }
+
+pimStarGIAssertTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimStarGIAssertState is 'iAmAssertWinner', this is the
+            time remaining before the local router next sends a (*,G)
+            Assert message on this interface.  If pimStarGIAssertState
+            is 'iAmAssertLoser', this is the time remaining before the
+
+            (*,G) Assert state expires.  If pimStarGIAssertState is
+            'noInfo', this is zero.  This timer is called the (*,G)
+            Assert Timer in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.6.2"
+    ::= { pimStarGIEntry 8 }
+
+pimStarGIAssertWinnerAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimStarGIAssertState is 'iAmAssertLoser', this is the
+            address type of the assert winner; otherwise, this object is
+            unknown(0)."
+    ::= { pimStarGIEntry 9 }
+
+pimStarGIAssertWinnerAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimStarGIAssertState is 'iAmAssertLoser', this is the
+            address of the assert winner.  The InetAddressType is given
+            by the pimStarGIAssertWinnerAddressType object."
+    ::= { pimStarGIEntry 10 }
+
+pimStarGIAssertWinnerMetricPref OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimStarGIAssertState is 'iAmAssertLoser', this is the
+            metric preference of the route to the RP advertised by the
+            assert winner; otherwise, this object is zero."
+    ::= { pimStarGIEntry 11 }
+
+pimStarGIAssertWinnerMetric OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimStarGIAssertState is 'iAmAssertLoser', this is the
+            routing metric of the route to the RP advertised by the
+            assert winner; otherwise, this object is zero."
+    ::= { pimStarGIEntry 12 }
+
+--
+-- The PIM (S,G) State Table
+
+--
+
+pimSGTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimSGEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the non-interface specific
+            (S,G) state that PIM has."
+    REFERENCE "RFC 4601 section 4.1.4"
+    ::= { pim 6 }
+
+pimSGEntry OBJECT-TYPE
+    SYNTAX     PimSGEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimSGTable."
+    INDEX      { pimSGAddressType,
+                 pimSGGrpAddress,
+                 pimSGSrcAddress }
+    ::= { pimSGTable 1 }
+
+PimSGEntry ::= SEQUENCE {
+    pimSGAddressType               InetAddressType,
+    pimSGGrpAddress                InetAddress,
+    pimSGSrcAddress                InetAddress,
+    pimSGUpTime                    TimeTicks,
+    pimSGPimMode                   PimMode,
+    pimSGUpstreamJoinState         INTEGER,
+    pimSGUpstreamJoinTimer         TimeTicks,
+    pimSGUpstreamNeighbor          InetAddress,
+    pimSGRPFIfIndex                InterfaceIndexOrZero,
+    pimSGRPFNextHopType            InetAddressType,
+    pimSGRPFNextHop                InetAddress,
+    pimSGRPFRouteProtocol          IANAipRouteProtocol,
+    pimSGRPFRouteAddress           InetAddress,
+    pimSGRPFRoutePrefixLength      InetAddressPrefixLength,
+    pimSGRPFRouteMetricPref        Unsigned32,
+    pimSGRPFRouteMetric            Unsigned32,
+    pimSGSPTBit                    TruthValue,
+    pimSGKeepaliveTimer            TimeTicks,
+    pimSGDRRegisterState           INTEGER,
+    pimSGDRRegisterStopTimer       TimeTicks,
+    pimSGRPRegisterPMBRAddressType InetAddressType,
+    pimSGRPRegisterPMBRAddress     InetAddress,
+    pimSGUpstreamPruneState        INTEGER,
+    pimSGUpstreamPruneLimitTimer   TimeTicks,
+    pimSGOriginatorState           INTEGER,
+    pimSGSourceActiveTimer         TimeTicks,
+    pimSGStateRefreshTimer         TimeTicks
+}
+
+pimSGAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the source and multicast group for this
+            entry."
+    ::= { pimSGEntry 1 }
+
+pimSGGrpAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address for this entry.  The
+            InetAddressType is given by the pimSGAddressType object."
+    ::= { pimSGEntry 2 }
+
+pimSGSrcAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The source address for this entry.  The InetAddressType is
+            given by the pimSGAddressType object."
+    ::= { pimSGEntry 3 }
+
+pimSGUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this entry was created by the local router."
+    ::= { pimSGEntry 4 }
+
+pimSGPimMode OBJECT-TYPE
+    SYNTAX     PimMode { ssm(2), asm(3) }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether pimSGGrpAddress is an SSM (Source Specific
+            Multicast, used with PIM-SM) or ASM (Any Source Multicast,
+            used with PIM-SM) group."
+    REFERENCE "RFC 4601 section 4.5.2, RFC 3569, and
+               'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable"
+    ::= { pimSGEntry 5 }
+
+pimSGUpstreamJoinState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  notJoined (1),
+                  joined (2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router should join the shortest-path tree
+            for the source and group represented by this entry.  This
+            corresponds to the state of the upstream (S,G) state machine
+            in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.5.7"
+    ::= { pimSGEntry 6 }
+
+pimSGUpstreamJoinTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router next sends a
+            periodic (S,G) Join message on pimSGRPFIfIndex.  This timer
+            is called the (S,G) Upstream Join Timer in the PIM-SM
+            specification.  This object is zero if the timer is not
+            running."
+    REFERENCE "RFC 4601 sections 4.10 and 4.11"
+    ::= { pimSGEntry 7 }
+
+pimSGUpstreamNeighbor OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary address of the neighbor on pimSGRPFIfIndex that
+            the local router is sending periodic (S,G) Join messages to.
+            This is zero if the RPF next hop is unknown or is not a
+            PIM neighbor.  The InetAddressType is given by the
+            pimSGAddressType object.  This address is called RPF'(S,G)
+            in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.1.6"
+    ::= { pimSGEntry 8 }
+
+pimSGRPFIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the RPF interface towards the
+            source, or zero if the RPF interface is unknown."
+    ::= { pimSGEntry 9 }
+
+pimSGRPFNextHopType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the RPF next hop towards the source, or
+            unknown(0) if the RPF next hop is unknown."
+    ::= { pimSGEntry 10 }
+
+pimSGRPFNextHop OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address of the RPF next hop towards the source.  The
+            InetAddressType is given by the pimSGRPFNextHopType.  This
+            address is called MRIB.next_hop(S) in the PIM-SM
+            specification."
+    REFERENCE "RFC 4601 section 4.5.5"
+    ::= { pimSGEntry 11 }
+
+pimSGRPFRouteProtocol OBJECT-TYPE
+    SYNTAX     IANAipRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing mechanism via which the route used to find the
+            RPF interface towards the source was learned."
+    ::= { pimSGEntry 12 }
+
+pimSGRPFRouteAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address that, when combined with the corresponding
+            value of pimSGRPFRoutePrefixLength, identifies the route
+            used to find the RPF interface towards the source.  The
+            InetAddressType is given by the pimSGRPFNextHopType object.
+
+            This address object is only significant up to
+
+            pimSGRPFRoutePrefixLength bits.  The remainder of the
+            address bits are zero."
+    ::= { pimSGEntry 13 }
+
+pimSGRPFRoutePrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The prefix length that, when combined with the
+            corresponding value of pimSGRPFRouteAddress, identifies the
+            route used to find the RPF interface towards the source.
+            The InetAddressType is given by the pimSGRPFNextHopType
+            object."
+    ::= { pimSGEntry 14 }
+
+pimSGRPFRouteMetricPref OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The metric preference of the route used to find the RPF
+            interface towards the source."
+    ::= { pimSGEntry 15 }
+
+pimSGRPFRouteMetric OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The routing metric of the route used to find the RPF
+            interface towards the source."
+    ::= { pimSGEntry 16 }
+
+pimSGSPTBit OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the SPT bit is set; and therefore whether
+            forwarding is taking place on the shortest-path tree."
+    ::= { pimSGEntry 17 }
+
+pimSGKeepaliveTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before this (S,G) state expires, in
+            the absence of explicit (S,G) local membership or (S,G)
+            Join messages received to maintain it.  This timer is
+            called the (S,G) Keepalive Timer in the PIM-SM
+            specification."
+    REFERENCE "RFC 4601 section 4.1.4"
+    ::= { pimSGEntry 18 }
+
+pimSGDRRegisterState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  noInfo (1),
+                  join (2),
+                  joinPending (3),
+                  prune (4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router should encapsulate (S,G) data
+            packets in Register messages and send them to the RP.  This
+            corresponds to the state of the per-(S,G) Register state
+            machine in the PIM-SM specification.  This object is always
+            'noInfo' unless pimSGPimMode is 'asm'."
+    REFERENCE "RFC 4601 section 4.4.1"
+    ::= { pimSGEntry 19 }
+
+pimSGDRRegisterStopTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGDRRegisterState is 'prune', this is the time
+            remaining before the local router sends a Null-Register
+            message to the RP.  If pimSGDRRegisterState is
+            'joinPending', this is the time remaining before the local
+            router resumes encapsulating data packets and sending them
+            to the RP.  Otherwise, this is zero.  This timer is called
+            the Register-Stop Timer in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.4"
+    ::= { pimSGEntry 20 }
+
+pimSGRPRegisterPMBRAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The address type of the first PIM Multicast Border Router
+            to send a Register message with the Border bit set.  This
+
+            object is unknown(0) if the local router is not the RP for
+            the group."
+    ::= { pimSGEntry 21 }
+
+pimSGRPRegisterPMBRAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the first PIM Multicast Border Router to
+            send a Register message with the Border bit set.  The
+            InetAddressType is given by the
+            pimSGRPRegisterPMBRAddressType object."
+    ::= { pimSGEntry 22 }
+
+pimSGUpstreamPruneState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  forwarding (1),
+                  ackpending (2),
+                  pruned (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router has pruned itself from the tree.
+            This corresponds to the state of the upstream prune (S,G)
+            state machine in the PIM-DM specification.  This object is
+            used only by PIM-DM."
+    REFERENCE "RFC 3973 section 4.4.1"
+    ::= { pimSGEntry 23 }
+
+pimSGUpstreamPruneLimitTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router may send a (S,G)
+            Prune message on pimSGRPFIfIndex.  This timer is called the
+            (S,G) Prune Limit Timer in the PIM-DM specification.  This
+            object is zero if the timer is not running.  This object is
+            used only by PIM-DM."
+    REFERENCE "RFC 2973 section 4.8"
+    ::= { pimSGEntry 24 }
+
+pimSGOriginatorState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  notOriginator (1),
+                  originator (2)
+
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the router is an originator for an (S,G) message
+            flow.  This corresponds to the state of the per-(S,G)
+            Originator state machine in the PIM-DM specification.  This
+            object is used only by PIM-DM."
+    REFERENCE "RFC 3973 section 4.5.2"
+    ::= { pimSGEntry 25 }
+
+pimSGSourceActiveTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGOriginatorState is 'originator', this is the time
+            remaining before the local router reverts to a notOriginator
+            state.  Otherwise, this is zero.  This timer is called the
+            Source Active Timer in the PIM-DM specification.  This
+            object is used only by PIM-DM."
+    REFERENCE "RFC 3973 section 4.8"
+    ::= { pimSGEntry 26 }
+
+pimSGStateRefreshTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGOriginatorState is 'originator', this is the time
+            remaining before the local router sends a State Refresh
+            message.  Otherwise, this is zero.  This timer is called the
+            State Refresh Timer in the PIM-DM specification.  This
+            object is used only by PIM-DM."
+    REFERENCE "RFC 3973 section 4.8"
+    ::= { pimSGEntry 27 }
+
+--
+-- The PIM (S,G,I) State Table
+--
+
+pimSGITable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimSGIEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interface-specific (S,G)
+            state that PIM has."
+    REFERENCE "RFC 4601 section 4.1.4"
+    ::= { pim 7 }
+
+pimSGIEntry OBJECT-TYPE
+    SYNTAX     PimSGIEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimSGITable."
+    INDEX      { pimSGAddressType,
+                 pimSGGrpAddress,
+                 pimSGSrcAddress,
+                 pimSGIIfIndex }
+    ::= { pimSGITable 1 }
+
+PimSGIEntry ::= SEQUENCE {
+    pimSGIIfIndex                 InterfaceIndex,
+    pimSGIUpTime                  TimeTicks,
+    pimSGILocalMembership         TruthValue,
+    pimSGIJoinPruneState          INTEGER,
+    pimSGIPrunePendingTimer       TimeTicks,
+    pimSGIJoinExpiryTimer         TimeTicks,
+    pimSGIAssertState             INTEGER,
+    pimSGIAssertTimer             TimeTicks,
+    pimSGIAssertWinnerAddressType InetAddressType,
+    pimSGIAssertWinnerAddress     InetAddress,
+    pimSGIAssertWinnerMetricPref  Unsigned32,
+    pimSGIAssertWinnerMetric      Unsigned32
+}
+
+pimSGIIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex of the interface that this entry corresponds
+            to."
+    ::= { pimSGIEntry 1 }
+
+pimSGIUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this entry was created by the local router."
+    ::= { pimSGIEntry 2 }
+
+pimSGILocalMembership OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router has (S,G) local membership on this
+            interface (resulting from a mechanism such as IGMP or MLD).
+            This corresponds to local_receiver_include(S,G,I) in the
+            PIM-SM specification."
+    REFERENCE "RFC 3376, RFC 3810, RFC 4601 sections 4.1.6, 4.6.1, and
+              4.6.2"
+    ::= { pimSGIEntry 3 }
+
+pimSGIJoinPruneState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  noInfo (1),
+                  join (2),
+                  prunePending (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The state resulting from (S,G) Join/Prune messages
+            received on this interface.  This corresponds to the state
+            of the downstream per-interface (S,G) state machine in the
+            PIM-SM and PIM-DM specification."
+    REFERENCE "RFC 4601 section 4.5.3 and RFC 3973 section 4.4.2"
+    ::= { pimSGIEntry 4 }
+
+pimSGIPrunePendingTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router acts on an (S,G)
+            Prune message received on this interface, during which the
+            router is waiting to see whether another downstream router
+            will override the Prune message.  This timer is called the
+            (S,G) Prune-Pending Timer in the PIM-SM specification.  This
+            object is zero if the timer is not running."
+    REFERENCE "RFC 4601 sections 4.5.3 and 4.5.4"
+    ::= { pimSGIEntry 5 }
+
+pimSGIJoinExpiryTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before (S,G) Join state for this
+
+            interface expires.  This timer is called the (S,G) Join
+            Expiry Timer in the PIM-SM specification.  This object is
+            zero if the timer is not running.  A value of 'FFFFFFFF'h
+            indicates an infinite expiry time.  This timer is called the
+            (S,G) Prune Timer in the PIM-DM specification."
+    REFERENCE "RFC 4601 section 4.10 and RFC 3973 section 4.8"
+    ::= { pimSGIEntry 6 }
+
+pimSGIAssertState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  noInfo (1),
+                  iAmAssertWinner (2),
+                  iAmAssertLoser (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The (S,G) Assert state for this interface.  This
+            corresponds to the state of the per-interface (S,G) Assert
+            state machine in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.6.1"
+    ::= { pimSGIEntry 7 }
+
+pimSGIAssertTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGIAssertState is 'iAmAssertWinner', this is the time
+            remaining before the local router next sends a (S,G) Assert
+            message on this interface.  If pimSGIAssertState is
+            'iAmAssertLoser', this is the time remaining before the
+            (S,G) Assert state expires.  If pimSGIAssertState is
+            'noInfo', this is zero.  This timer is called the (S,G)
+            Assert Timer in the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.6.1"
+    ::= { pimSGIEntry 8 }
+
+pimSGIAssertWinnerAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGIAssertState is 'iAmAssertLoser', this is the
+            address type of the assert winner; otherwise, this object is
+            unknown(0)."
+    ::= { pimSGIEntry 9 }
+
+pimSGIAssertWinnerAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGIAssertState is 'iAmAssertLoser', this is the
+            address of the assert winner.  The InetAddressType is given
+            by the pimSGIAssertWinnerAddressType object."
+    ::= { pimSGIEntry 10 }
+
+pimSGIAssertWinnerMetricPref OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGIAssertState is 'iAmAssertLoser', this is the
+            metric preference of the route to the source advertised by
+            the assert winner; otherwise, this object is zero."
+    ::= { pimSGIEntry 11 }
+
+pimSGIAssertWinnerMetric OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If pimSGIAssertState is 'iAmAssertLoser', this is the
+            routing metric of the route to the source advertised by the
+            assert winner; otherwise, this object is zero."
+    ::= { pimSGIEntry 12 }
+
+--
+-- The PIM (S,G,rpt) State Table
+--
+
+pimSGRptTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimSGRptEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the non-interface specific
+            (S,G,rpt) state that PIM has."
+    REFERENCE "RFC 4601 section 4.1.5"
+    ::= { pim 8 }
+
+pimSGRptEntry OBJECT-TYPE
+    SYNTAX     PimSGRptEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimSGRptTable."
+    INDEX      { pimStarGAddressType,
+                 pimStarGGrpAddress,
+                 pimSGRptSrcAddress }
+    ::= { pimSGRptTable 1 }
+
+PimSGRptEntry ::= SEQUENCE {
+    pimSGRptSrcAddress             InetAddress,
+    pimSGRptUpTime                 TimeTicks,
+    pimSGRptUpstreamPruneState     INTEGER,
+    pimSGRptUpstreamOverrideTimer  TimeTicks
+}
+
+pimSGRptSrcAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The source address for this entry.  The InetAddressType is
+            given by the pimStarGAddressType object."
+    ::= { pimSGRptEntry 1 }
+
+pimSGRptUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this entry was created by the local router."
+    ::= { pimSGRptEntry 2 }
+
+pimSGRptUpstreamPruneState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  rptNotJoined (1),
+                  pruned (2),
+                  notPruned (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router should prune the source off the RP
+            tree.  This corresponds to the state of the upstream
+            (S,G,rpt) state machine for triggered messages in the PIM-SM
+            specification."
+    REFERENCE "RFC 4601 section 4.5.9"
+    ::= { pimSGRptEntry 3 }
+
+pimSGRptUpstreamOverrideTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router sends a
+            triggered (S,G,rpt) Join message on pimStarGRPFIfIndex.
+            This timer is called the (S,G,rpt) Upstream Override Timer
+            in the PIM-SM specification.  This object is zero if the
+            timer is not running."
+    REFERENCE "RFC 4601 section 4.5.9"
+    ::= { pimSGRptEntry 4 }
+
+--
+-- The PIM (S,G,rpt,I) State Table
+--
+
+pimSGRptITable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimSGRptIEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the interface-specific
+            (S,G,rpt) state that PIM has."
+    REFERENCE "RFC 4601 section 4.1.5"
+    ::= { pim 9 }
+
+pimSGRptIEntry OBJECT-TYPE
+    SYNTAX     PimSGRptIEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimSGRptITable."
+    INDEX      { pimStarGAddressType,
+                 pimStarGGrpAddress,
+                 pimSGRptSrcAddress,
+                 pimSGRptIIfIndex }
+    ::= { pimSGRptITable 1 }
+
+PimSGRptIEntry ::= SEQUENCE {
+    pimSGRptIIfIndex            InterfaceIndex,
+    pimSGRptIUpTime             TimeTicks,
+    pimSGRptILocalMembership    TruthValue,
+    pimSGRptIJoinPruneState     INTEGER,
+    pimSGRptIPrunePendingTimer  TimeTicks,
+    pimSGRptIPruneExpiryTimer   TimeTicks
+}
+
+pimSGRptIIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The ifIndex of the interface that this entry corresponds
+            to."
+    ::= { pimSGRptIEntry 1 }
+
+pimSGRptIUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since this entry was created by the local router."
+    ::= { pimSGRptIEntry 2 }
+
+pimSGRptILocalMembership OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether the local router has both (*,G) include local
+            membership and (S,G) exclude local membership on this
+            interface (resulting from a mechanism such as IGMP or MLD).
+            This corresponds to local_receiver_exclude(S,G,I) in the
+            PIM-SM specification."
+    REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6"
+    ::= { pimSGRptIEntry 3 }
+
+pimSGRptIJoinPruneState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  noInfo (1),
+                  prune (2),
+                  prunePending (3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The state resulting from (S,G,rpt) Join/Prune messages
+            received on this interface.  This corresponds to the state
+            of the downstream per-interface (S,G,rpt) state machine in
+            the PIM-SM specification."
+    REFERENCE "RFC 4601 section 4.5.4"
+    ::= { pimSGRptIEntry 4 }
+
+pimSGRptIPrunePendingTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before the local router starts pruning
+            this source off the RP tree.  This timer is called the
+            (S,G,rpt) Prune-Pending Timer in the PIM-SM specification.
+            This object is zero if the timer is not running."
+    REFERENCE "RFC 4601 section 4.5.4"
+    ::= { pimSGRptIEntry 5 }
+
+pimSGRptIPruneExpiryTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time remaining before (S,G,rpt) Prune state for this
+            interface expires.  This timer is called the (S,G,rpt)
+            Prune Expiry Timer in the PIM-SM specification.  This object
+            is zero if the timer is not running.  A value of 'FFFFFFFF'h
+            indicates an infinite expiry time."
+    REFERENCE "RFC 4601 section 4.5.4"
+    ::= { pimSGRptIEntry 6 }
+
+--
+-- The PIM Bidir DF-Election Table
+--
+
+pimBidirDFElectionTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimBidirDFElectionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the per-RP Designated
+            Forwarder (DF) Election state for each interface for all the
+            RPs in BIDIR mode."
+    REFERENCE "RFC 5015 section 3.5"
+    ::= { pim 10 }
+
+pimBidirDFElectionEntry OBJECT-TYPE
+    SYNTAX     PimBidirDFElectionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimBidirDFElectionTable."
+    INDEX      { pimBidirDFElectionAddressType,
+                 pimBidirDFElectionRPAddress,
+                 pimBidirDFElectionIfIndex }
+    ::= { pimBidirDFElectionTable 1 }
+
+PimBidirDFElectionEntry ::= SEQUENCE {
+    pimBidirDFElectionAddressType       InetAddressType,
+    pimBidirDFElectionRPAddress         InetAddress,
+    pimBidirDFElectionIfIndex           InterfaceIndex,
+    pimBidirDFElectionWinnerAddressType InetAddressType,
+    pimBidirDFElectionWinnerAddress     InetAddress,
+    pimBidirDFElectionWinnerUpTime      TimeTicks,
+    pimBidirDFElectionWinnerMetricPref  Unsigned32,
+    pimBidirDFElectionWinnerMetric      Unsigned32,
+    pimBidirDFElectionState             INTEGER,
+    pimBidirDFElectionStateTimer        TimeTicks
+}
+
+pimBidirDFElectionAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the RP for which the DF state is being
+            maintained."
+    ::= { pimBidirDFElectionEntry 1 }
+
+pimBidirDFElectionRPAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the RP for which the DF state is being
+            maintained.  The InetAddressType is given by the
+            pimBidirDFElectionAddressType object."
+    ::= { pimBidirDFElectionEntry 2 }
+
+pimBidirDFElectionIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The value of ifIndex for the interface for which the DF
+            state is being maintained."
+    ::= { pimBidirDFElectionEntry 3 }
+
+pimBidirDFElectionWinnerAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary address type of the winner of the DF Election
+            process.  A value of unknown(0) indicates there is currently
+
+            no DF."
+    ::= { pimBidirDFElectionEntry 4 }
+
+pimBidirDFElectionWinnerAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The primary IP address of the winner of the DF Election
+            process.  The InetAddressType is given by the
+            pimBidirDFElectionWinnerAddressType object."
+    ::= { pimBidirDFElectionEntry 5 }
+
+pimBidirDFElectionWinnerUpTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The time since the current winner (last) became elected as
+            the DF for this RP."
+    ::= { pimBidirDFElectionEntry 6 }
+
+pimBidirDFElectionWinnerMetricPref OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The metric preference advertised by the DF Winner, or zero
+            if there is currently no DF."
+    ::= { pimBidirDFElectionEntry 7 }
+
+pimBidirDFElectionWinnerMetric OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The metric advertised by the DF Winner, or zero if there is
+            currently no DF."
+    ::= { pimBidirDFElectionEntry 8 }
+
+pimBidirDFElectionState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  dfOffer(1),
+                  dfLose(2),
+                  dfWinner(3),
+                  dfBackoff(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The state of this interface with respect to DF-Election for
+            this RP.  The states correspond to the ones defined in the
+            BIDIR-PIM specification."
+    REFERENCE "RFC 5015 section 3.5.3.1"
+    ::= { pimBidirDFElectionEntry 9 }
+
+pimBidirDFElectionStateTimer OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum time remaining after which the local router
+            will expire the current DF state represented by
+            pimBidirDFElectionState."
+    ::= { pimBidirDFElectionEntry 10 }
+
+--
+-- The PIM Static RP Table
+--
+
+pimStaticRPTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimStaticRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table is used to manage static configuration of RPs.
+
+            If the group prefixes configured for two or more rows in
+            this table overlap, the row with the greatest value of
+            pimStaticRPGrpPrefixLength is used for the overlapping
+            range."
+    REFERENCE "RFC 4601 section 3.7"
+    ::= { pim 11 }
+
+pimStaticRPEntry OBJECT-TYPE
+    SYNTAX     PimStaticRPEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimStaticRPTable.  This
+            entry is preserved on agent restart."
+    INDEX      { pimStaticRPAddressType,
+                 pimStaticRPGrpAddress,
+                 pimStaticRPGrpPrefixLength }
+    ::= { pimStaticRPTable 1 }
+
+PimStaticRPEntry ::= SEQUENCE {
+    pimStaticRPAddressType      InetAddressType,
+    pimStaticRPGrpAddress       InetAddress,
+    pimStaticRPGrpPrefixLength  InetAddressPrefixLength,
+    pimStaticRPRPAddress        InetAddress,
+    pimStaticRPPimMode          PimMode,
+    pimStaticRPOverrideDynamic  TruthValue,
+    pimStaticRPPrecedence       Unsigned32,
+    pimStaticRPRowStatus        RowStatus,
+    pimStaticRPStorageType      StorageType
+}
+
+pimStaticRPAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of this entry."
+    ::= { pimStaticRPEntry 1 }
+
+pimStaticRPGrpAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group address that, when combined with
+            pimStaticRPGrpPrefixLength, gives the group prefix for this
+            entry.  The InetAddressType is given by the
+            pimStaticRPAddressType object.
+
+            This address object is only significant up to
+            pimStaticRPGrpPrefixLength bits.  The remainder of the
+            address bits are zero.  This is especially important for
+            this index field, which is part of the index of this entry.
+            Any non-zero bits would signify an entirely different
+            entry."
+    ::= { pimStaticRPEntry 2 }
+
+pimStaticRPGrpPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength (4..128)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group prefix length that, when combined
+            with pimStaticRPGrpAddress, gives the group prefix for this
+            entry.  The InetAddressType is given by the
+            pimStaticRPAddressType object.  If pimStaticRPAddressType is
+            'ipv4' or 'ipv4z', this object must be in the range 4..32.
+
+            If pimStaticRPGrpAddressType is 'ipv6' or 'ipv6z', this
+            object must be in the range 8..128."
+    ::= { pimStaticRPEntry 3 }
+
+pimStaticRPRPAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the RP to be used for groups within this
+            group prefix.  The InetAddressType is given by the
+            pimStaticRPAddressType object."
+    ::= { pimStaticRPEntry 4 }
+
+pimStaticRPPimMode OBJECT-TYPE
+    SYNTAX     PimMode { ssm(2), asm(3), bidir(4) }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The PIM mode to be used for groups in this group prefix.
+
+            If this object is set to ssm(2), then pimStaticRPRPAddress
+            must be set to zero.  No RP operations are ever possible for
+            PIM Mode SSM."
+    REFERENCE "RFC 4601 section 3.7, RFC 3569, and
+               'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable"
+    DEFVAL { asm }
+    ::= { pimStaticRPEntry 5 }
+
+pimStaticRPOverrideDynamic OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "Whether this static RP configuration will override other
+            group mappings in this group prefix.  If this object is
+            TRUE, then it will override:
+
+            -  RP information learned dynamically for groups in this
+            group prefix.
+
+            -  RP information configured in pimStaticRPTable with
+            pimStaticRPOverrideDynamic set to FALSE.
+
+            See pimGroupMappingTable for details."
+    DEFVAL { false }
+    ::= { pimStaticRPEntry 6 }
+
+pimStaticRPPrecedence OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The value for pimGroupMappingPrecedence to be used for this
+            static RP configuration.  This allows fine control over
+            which configuration is overridden by this static
+            configuration.
+
+            If pimStaticRPOverrideDynamic is set to TRUE, all dynamic RP
+            configuration is overridden by this static configuration,
+            whatever the value of this object.
+
+            The absolute values of this object have a significance only
+            on the local router and do not need to be coordinated with
+            other routers.  A setting of this object may have different
+            effects when applied to other routers.
+
+            Do not use this object unless fine control of static RP
+            behavior on the local router is required."
+    ::= { pimStaticRPEntry 7 }
+
+pimStaticRPRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which rows in this table can
+            be created and destroyed.
+
+            This status object cannot be set to active(1) before a valid
+            value has been written to pimStaticRPRPAddress.
+
+            All writeable objects in this entry can be modified when the
+            status of this entry is active(1)."
+    ::= { pimStaticRPEntry 8 }
+
+pimStaticRPStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The storage type for this row.  Rows having the value
+            'permanent' need not allow write-access to any columnar
+            objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { pimStaticRPEntry 9 }
+
+--
+-- The PIM Anycast-RP Set Table
+--
+
+pimAnycastRPSetTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimAnycastRPSetEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table is used to manage Anycast-RP via PIM Register
+            messages, as opposed to via other protocols such as MSDP
+            (Multicast Source Discovery Protocol).
+
+            Entries must be configured in this table if and only if the
+            local router is a member of one or more Anycast-RP sets,
+            that is, one or more Anycast-RP addresses are assigned to
+            the local router.  Note that if using static RP
+            configuration, this is in addition to, not instead of, the
+            pimStaticRPTable entries that must be configured for the
+            Anycast-RPs.
+
+            The set of rows with the same values of both
+            pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
+            corresponds to the Anycast-RP set for that Anycast-RP
+            address.
+
+            When an Anycast-RP set configuration is active, one entry
+            per pimAnycastRPSetAnycastAddress corresponds to the local
+            router.  The local router is identified by the
+            pimAnycastRpSetLocalRouter object.  That entry determines
+            the source address used by the local router when forwarding
+            PIM Register messages within the Anycast-RP set."
+    REFERENCE "RFC 4610, RFC 3618"
+    ::= { pim 12 }
+
+pimAnycastRPSetEntry OBJECT-TYPE
+    SYNTAX     PimAnycastRPSetEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry corresponds to a single router within a particular
+            Anycast-RP set.  This entry is preserved on agent restart."
+    INDEX      { pimAnycastRPSetAddressType,
+                 pimAnycastRPSetAnycastAddress,
+                 pimAnycastRPSetRouterAddress }
+    ::= { pimAnycastRPSetTable 1 }
+
+PimAnycastRPSetEntry ::= SEQUENCE {
+
+    pimAnycastRPSetAddressType     InetAddressType,
+    pimAnycastRPSetAnycastAddress  InetAddress,
+    pimAnycastRPSetRouterAddress   InetAddress,
+    pimAnycastRPSetLocalRouter     TruthValue,
+    pimAnycastRPSetRowStatus       RowStatus,
+    pimAnycastRPSetStorageType     StorageType
+}
+
+pimAnycastRPSetAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the Anycast-RP address and router
+            address."
+    ::= { pimAnycastRPSetEntry 1 }
+
+pimAnycastRPSetAnycastAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The Anycast-RP address.  The InetAddressType is given by
+            the pimAnycastRPSetAddressType object."
+    ::= { pimAnycastRPSetEntry 2 }
+
+pimAnycastRPSetRouterAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of a router that is a member of the Anycast-RP
+            set.  The InetAddressType is given by the
+            pimAnycastRPSetAddressType object.
+
+            This address differs from pimAnycastRPSetAnycastAddress.
+            Equal values for these two addresses in a single entry are
+            not permitted.  That would cause a Register loop."
+    ::= { pimAnycastRPSetEntry 3 }
+
+pimAnycastRPSetLocalRouter OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Whether this entry corresponds to the local router."
+    ::= { pimAnycastRPSetEntry 4 }
+
+pimAnycastRPSetRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which rows in this table can
+            be created and destroyed.
+
+            This status object can be set to active(1) without setting
+            any other columnar objects in this entry.
+
+            All writeable objects in this entry can be modified when the
+            status of this entry is active(1)."
+    ::= { pimAnycastRPSetEntry 5 }
+
+pimAnycastRPSetStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The storage type for this row.  Rows having the value
+            'permanent' need not allow write-access to any columnar
+            objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { pimAnycastRPSetEntry 6 }
+
+--
+-- The PIM Group Mapping Table
+--
+
+pimGroupMappingTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PimGroupMappingEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing mappings from multicast
+            group prefixes to the PIM mode and RP address to use for
+            groups within that group prefix.
+
+            Rows in this table are created for a variety of reasons,
+            indicated by the value of the pimGroupMappingOrigin object.
+
+            -  Rows with a pimGroupMappingOrigin value of 'fixed' are
+               created automatically by the router at startup, to
+               correspond to the well-defined prefixes of link-local and
+               unroutable group addresses.  These rows are never
+               destroyed.
+
+            -  Rows with a pimGroupMappingOrigin value of 'embedded' are
+               created by the router to correspond to group prefixes
+               that are to be treated as being in Embedded-RP format.
+
+            -  Rows with a pimGroupMappingOrigin value of 'configRp' are
+               created and destroyed as a result of rows in the
+               pimStaticRPTable being created and destroyed.
+
+            -  Rows with a pimGroupMappingOrigin value of 'configSsm'
+               are created and destroyed as a result of configuration of
+               SSM address ranges to the local router.
+
+            -  Rows with a pimGroupMappingOrigin value of 'bsr' are
+               created as a result of running the PIM Bootstrap Router
+               (BSR) mechanism.  If the local router is not the elected
+               BSR, these rows are created to correspond to group
+               prefixes in the PIM Bootstrap messages received from the
+               elected BSR.  If the local router is the elected BSR,
+               these rows are created to correspond to group prefixes in
+               the PIM Bootstrap messages that the local router sends.
+               In either case, these rows are destroyed when the group
+               prefixes are timed out by the BSR mechanism.
+
+            -  Rows with a pimGroupMappingOrigin value of 'other' are
+               created and destroyed according to some other mechanism
+               not specified here.
+
+            Given the collection of rows in this table at any point in
+            time, the PIM mode and RP address to use for a particular
+            group is determined using the following algorithm.
+
+            1. From the set of all rows, the subset whose group prefix
+               contains the group in question are selected.
+
+            2. If there are no such rows, then the group mapping is
+               undefined.
+
+            3. If there are multiple selected rows, and a subset is
+               defined by pimStaticRPTable (pimGroupMappingOrigin value
+               of 'configRp') with pimStaticRPOverrideDynamic set to
+               TRUE, then this subset is selected.
+
+            4. From the selected subset of rows, the subset that have
+               the greatest value of pimGroupMappingGrpPrefixLength are
+               selected.
+
+            5. If there are still multiple selected rows, the subset
+               that has the highest precedence (the lowest numerical
+
+               value for pimGroupMappingPrecedence) is selected.
+
+            6. If there are still multiple selected rows, the row
+               selected is implementation dependent; the implementation
+               might or might not apply the PIM hash function to select
+               the row.
+
+            7. The group mode to use is given by the value of
+               pimGroupMappingPimMode from the single selected row; the
+               RP to use is given by the value of
+               pimGroupMappingRPAddress, unless pimGroupMappingOrigin is
+               'embedded', in which case, the RP is extracted from the
+               group address in question."
+    REFERENCE "RFC 4601 section 3.7, RFC 3956, and RFC 4610"
+    ::= { pim 13 }
+
+pimGroupMappingEntry OBJECT-TYPE
+    SYNTAX     PimGroupMappingEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the pimGroupMappingTable."
+    INDEX      { pimGroupMappingOrigin,
+                 pimGroupMappingAddressType,
+                 pimGroupMappingGrpAddress,
+                 pimGroupMappingGrpPrefixLength,
+                 pimGroupMappingRPAddressType,
+                 pimGroupMappingRPAddress }
+    ::= { pimGroupMappingTable 1 }
+
+PimGroupMappingEntry ::= SEQUENCE {
+    pimGroupMappingOrigin           PimGroupMappingOriginType,
+    pimGroupMappingAddressType      InetAddressType,
+    pimGroupMappingGrpAddress       InetAddress,
+    pimGroupMappingGrpPrefixLength  InetAddressPrefixLength,
+    pimGroupMappingRPAddressType    InetAddressType,
+    pimGroupMappingRPAddress        InetAddress,
+    pimGroupMappingPimMode          PimMode,
+    pimGroupMappingPrecedence       Unsigned32
+}
+
+pimGroupMappingOrigin OBJECT-TYPE
+    SYNTAX     PimGroupMappingOriginType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The mechanism by which this group mapping was learned."
+    ::= { pimGroupMappingEntry 1 }
+
+pimGroupMappingAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the IP multicast group prefix."
+    ::= { pimGroupMappingEntry 2 }
+
+pimGroupMappingGrpAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP multicast group address that, when combined with
+            pimGroupMappingGrpPrefixLength, gives the group prefix for
+            this mapping.  The InetAddressType is given by the
+            pimGroupMappingAddressType object.
+
+            This address object is only significant up to
+            pimGroupMappingGrpPrefixLength bits.  The remainder of the
+            address bits are zero.  This is especially important for
+            this index field, which is part of the index of this entry.
+            Any non-zero bits would signify an entirely different
+            entry."
+    ::= { pimGroupMappingEntry 3 }
+
+pimGroupMappingGrpPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength (4..128)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The multicast group prefix length that, when combined
+            with pimGroupMappingGrpAddress, gives the group prefix for
+            this mapping.  The InetAddressType is given by the
+            pimGroupMappingAddressType object.  If
+            pimGroupMappingAddressType is 'ipv4' or 'ipv4z', this
+            object must be in the range 4..32.  If
+            pimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object
+            must be in the range 8..128."
+    ::= { pimGroupMappingEntry 4 }
+
+pimGroupMappingRPAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type of the RP to be used for groups within
+            this group prefix, or unknown(0) if no RP is to be used or
+
+            if the RP address is unknown.  This object must be
+            unknown(0) if pimGroupMappingPimMode is ssm(2), or if
+            pimGroupMappingOrigin is embedded(6)."
+    ::= { pimGroupMappingEntry 5 }
+
+pimGroupMappingRPAddress OBJECT-TYPE
+    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The IP address of the RP to be used for groups within this
+            group prefix.  The InetAddressType is given by the
+            pimGroupMappingRPAddressType object."
+    ::= { pimGroupMappingEntry 6 }
+
+pimGroupMappingPimMode OBJECT-TYPE
+    SYNTAX     PimMode
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The PIM mode to be used for groups in this group prefix."
+    ::= { pimGroupMappingEntry 7 }
+
+pimGroupMappingPrecedence OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The precedence of this row, used in the algorithm that
+            determines which row applies to a given group address
+            (described above).  Numerically higher values for this
+            object indicate lower precedences, with the value zero
+            denoting the highest precedence.
+
+            The absolute values of this object have a significance only
+            on the local router and do not need to be coordinated with
+            other routers."
+    ::= { pimGroupMappingEntry 8 }
+
+--
+-- PIM Notifications
+--
+
+pimNeighborLoss NOTIFICATION-TYPE
+    OBJECTS { pimNeighborUpTime }
+    STATUS     current
+    DESCRIPTION
+            "A pimNeighborLoss notification signifies the loss of an
+
+            adjacency with a neighbor.  This notification should be
+            generated when the neighbor timer expires, and the router
+            has no other neighbors on the same interface with the same
+            IP version and a lower IP address than itself.
+
+            This notification is generated whenever the counter
+            pimNeighborLossCount is incremented, subject
+            to the rate limit specified by
+            pimNeighborLossNotificationPeriod."
+    REFERENCE "RFC 4601 section 4.3.2"
+    ::= { pimNotifications 1 }
+
+pimInvalidRegister NOTIFICATION-TYPE
+    OBJECTS { pimGroupMappingPimMode,
+              pimInvalidRegisterAddressType,
+              pimInvalidRegisterOrigin,
+              pimInvalidRegisterGroup,
+              pimInvalidRegisterRp
+            }
+    STATUS      current
+    DESCRIPTION
+            "A pimInvalidRegister notification signifies that an invalid
+            PIM Register message was received by this device.
+
+            This notification is generated whenever the counter
+            pimInvalidRegisterMsgsRcvd is incremented, subject to the
+            rate limit specified by
+            pimInvalidRegisterNotificationPeriod."
+    REFERENCE "RFC 4601 section 4.4.2"
+    ::= { pimNotifications 2 }
+
+pimInvalidJoinPrune NOTIFICATION-TYPE
+    OBJECTS { pimGroupMappingPimMode,
+              pimInvalidJoinPruneAddressType,
+              pimInvalidJoinPruneOrigin,
+              pimInvalidJoinPruneGroup,
+              pimInvalidJoinPruneRp,
+              pimNeighborUpTime
+            }
+    STATUS      current
+    DESCRIPTION
+            "A pimInvalidJoinPrune notification signifies that an
+            invalid PIM Join/Prune message was received by this device.
+
+            This notification is generated whenever the counter
+            pimInvalidJoinPruneMsgsRcvd is incremented, subject to the
+            rate limit specified by
+            pimInvalidJoinPruneNotificationPeriod."
+    REFERENCE "RFC 4601 section 4.5.2"
+    ::= { pimNotifications 3 }
+
+pimRPMappingChange NOTIFICATION-TYPE
+    OBJECTS { pimGroupMappingPimMode,
+              pimGroupMappingPrecedence
+            }
+    STATUS      current
+    DESCRIPTION
+            "A pimRPMappingChange notification signifies a change to the
+            active RP mapping on this device.
+
+            This notification is generated whenever the counter
+            pimRPMappingChangeCount is incremented, subject to the
+            rate limit specified by
+            pimRPMappingChangeNotificationPeriod."
+    ::= { pimNotifications 4 }
+
+pimInterfaceElection NOTIFICATION-TYPE
+    OBJECTS { pimInterfaceAddressType,
+              pimInterfaceAddress }
+    STATUS      current
+    DESCRIPTION
+            "A pimInterfaceElection notification signifies that a new DR
+            or DF has been elected on a network.
+
+            This notification is generated whenever the counter
+            pimInterfaceElectionWinCount is incremented, subject to the
+            rate limit specified by
+            pimInterfaceElectionNotificationPeriod."
+    REFERENCE "RFC 4601 section 4.3.2 and RFC 5015 section 3.5.2"
+    ::= { pimNotifications 5 }
+
+--
+-- Conformance Information
+--
+
+pimMIBConformance OBJECT IDENTIFIER ::= { pimStdMIB 2 }
+pimMIBCompliances OBJECT IDENTIFIER ::= { pimMIBConformance 1 }
+pimMIBGroups      OBJECT IDENTIFIER ::= { pimMIBConformance 2 }
+
+--
+-- Compliance Statements
+--
+
+pimMIBComplianceAsm MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+             "The compliance statement for routers which are running
+             PIM-SM (Sparse Mode)."
+    MODULE  -- this module
+    MANDATORY-GROUPS { pimTopologyGroup,
+                       pimSsmGroup,
+                       pimRPConfigGroup,
+                       pimSmGroup }
+
+      GROUP   pimNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimTuningParametersGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimRouterStatisticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimAnycastRpGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimStaticRPPrecedenceGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationObjects
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDiagnosticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDeviceStorageGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { pimMIBCompliances 1 }
+
+pimMIBComplianceBidir MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers which are running
+            Bidir-PIM."
+    MODULE  -- this module
+    MANDATORY-GROUPS { pimTopologyGroup,
+                       pimRPConfigGroup,
+                       pimSmGroup,
+                       pimBidirGroup }
+
+      GROUP   pimNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimTuningParametersGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimRouterStatisticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimAnycastRpGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimStaticRPPrecedenceGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationObjects
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDiagnosticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDeviceStorageGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { pimMIBCompliances 2 }
+
+pimMIBComplianceSsm MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers which are running
+             PIM SSM (Source Specific Multicast)."
+    MODULE  -- this module
+    MANDATORY-GROUPS { pimTopologyGroup,
+                       pimSsmGroup }
+
+      GROUP   pimNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimTuningParametersGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimRouterStatisticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationObjects
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDiagnosticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDeviceStorageGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { pimMIBCompliances 3 }
+
+pimMIBComplianceDm MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for routers which are running
+            PIM-DM (Dense Mode)."
+    MODULE  -- this module
+    MANDATORY-GROUPS { pimTopologyGroup,
+                       pimSsmGroup,
+                       pimRPConfigGroup,
+                       pimSmGroup,
+                       pimDmGroup }
+
+      GROUP   pimNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimTuningParametersGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimRouterStatisticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimAnycastRpGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimStaticRPPrecedenceGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationObjects
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimNetMgmtNotificationGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDiagnosticsGroup
+      DESCRIPTION
+          "This group is optional."
+
+      GROUP   pimDeviceStorageGroup
+      DESCRIPTION
+          "This group is optional."
+    ::= { pimMIBCompliances 4 }
+
+--
+-- Units of Conformance
+--
+
+pimTopologyGroup OBJECT-GROUP
+    OBJECTS { pimInterfaceAddressType,
+              pimInterfaceAddress,
+              pimInterfaceGenerationIDValue,
+              pimInterfaceDR,
+              pimInterfaceDRPriorityEnabled,
+              pimInterfaceHelloHoldtime,
+              pimInterfaceJoinPruneHoldtime,
+              pimInterfaceLanDelayEnabled,
+              pimInterfaceEffectPropagDelay,
+              pimInterfaceEffectOverrideIvl,
+              pimInterfaceSuppressionEnabled,
+              pimInterfaceBidirCapable,
+              pimNeighborGenerationIDPresent,
+              pimNeighborGenerationIDValue,
+              pimNeighborUpTime,
+              pimNeighborExpiryTime,
+              pimNeighborDRPriorityPresent,
+              pimNeighborDRPriority,
+              pimNeighborLanPruneDelayPresent,
+              pimNeighborTBit,
+              pimNeighborPropagationDelay,
+              pimNeighborOverrideInterval,
+              pimNeighborBidirCapable,
+              pimNbrSecAddress
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of read-only objects used to report local PIM
+            topology."
+    ::= { pimMIBGroups 1 }
+
+pimNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { pimNeighborLoss }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notifications for signaling important PIM
+            events."
+    ::= { pimMIBGroups 2 }
+
+pimTuningParametersGroup OBJECT-GROUP
+    OBJECTS { pimKeepalivePeriod,
+              pimRegisterSuppressionTime,
+              pimInterfaceDRPriority,
+              pimInterfaceHelloInterval,
+              pimInterfaceTrigHelloInterval,
+              pimInterfaceJoinPruneInterval,
+              pimInterfacePropagationDelay,
+              pimInterfaceOverrideInterval,
+              pimInterfaceDomainBorder,
+              pimInterfaceStubInterface,
+              pimInterfaceStatus,
+              pimInterfaceStorageType
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of writeable objects used to configure PIM
+            behavior and to tune performance."
+    ::= { pimMIBGroups 3 }
+
+pimRouterStatisticsGroup OBJECT-GROUP
+    OBJECTS { pimStarGEntries,
+              pimStarGIEntries,
+              pimSGEntries,
+              pimSGIEntries,
+              pimSGRptEntries,
+              pimSGRptIEntries
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of statistics global to the PIM router."
+    ::= { pimMIBGroups 4 }
+
+pimSsmGroup OBJECT-GROUP
+    OBJECTS { pimSGUpTime,
+              pimSGPimMode,
+              pimSGUpstreamJoinState,
+              pimSGUpstreamJoinTimer,
+              pimSGUpstreamNeighbor,
+              pimSGRPFIfIndex,
+              pimSGRPFNextHopType,
+              pimSGRPFNextHop,
+              pimSGRPFRouteProtocol,
+              pimSGRPFRouteAddress,
+              pimSGRPFRoutePrefixLength,
+              pimSGRPFRouteMetricPref,
+              pimSGRPFRouteMetric,
+              pimSGSPTBit,
+              pimSGKeepaliveTimer,
+              pimSGDRRegisterState,
+              pimSGDRRegisterStopTimer,
+              pimSGRPRegisterPMBRAddressType,
+              pimSGRPRegisterPMBRAddress,
+              pimSGIUpTime,
+              pimSGILocalMembership,
+              pimSGIJoinPruneState,
+              pimSGIPrunePendingTimer,
+              pimSGIJoinExpiryTimer,
+              pimSGIAssertState,
+              pimSGIAssertTimer,
+              pimSGIAssertWinnerAddressType,
+              pimSGIAssertWinnerAddress,
+              pimSGIAssertWinnerMetricPref,
+              pimSGIAssertWinnerMetric
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of PIM
+            routers running the PIM SSM (Source Specific Multicast)
+            protocol, in PIM mode SM (Sparse Mode)."
+    ::= { pimMIBGroups 5 }
+
+pimRPConfigGroup OBJECT-GROUP
+    OBJECTS { pimStaticRPRPAddress,
+              pimStaticRPPimMode,
+              pimStaticRPOverrideDynamic,
+              pimStaticRPRowStatus,
+              pimStaticRPStorageType,
+              pimGroupMappingPimMode,
+              pimGroupMappingPrecedence
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support configuration of RPs
+            (Rendezvous Points) and Group Mappings."
+    ::= { pimMIBGroups 6 }
+
+pimSmGroup OBJECT-GROUP
+    OBJECTS { pimStarGUpTime,
+              pimStarGPimMode,
+              pimStarGRPAddressType,
+              pimStarGRPAddress,
+              pimStarGPimModeOrigin,
+              pimStarGRPIsLocal,
+              pimStarGUpstreamJoinState,
+              pimStarGUpstreamJoinTimer,
+              pimStarGUpstreamNeighborType,
+              pimStarGUpstreamNeighbor,
+              pimStarGRPFIfIndex,
+              pimStarGRPFNextHopType,
+              pimStarGRPFNextHop,
+              pimStarGRPFRouteProtocol,
+              pimStarGRPFRouteAddress,
+              pimStarGRPFRoutePrefixLength,
+              pimStarGRPFRouteMetricPref,
+              pimStarGRPFRouteMetric,
+              pimStarGIUpTime,
+              pimStarGILocalMembership,
+              pimStarGIJoinPruneState,
+              pimStarGIPrunePendingTimer,
+              pimStarGIJoinExpiryTimer,
+              pimStarGIAssertState,
+              pimStarGIAssertTimer,
+              pimStarGIAssertWinnerAddressType,
+              pimStarGIAssertWinnerAddress,
+              pimStarGIAssertWinnerMetricPref,
+              pimStarGIAssertWinnerMetric,
+              pimSGRptUpTime,
+              pimSGRptUpstreamPruneState,
+              pimSGRptUpstreamOverrideTimer,
+              pimSGRptIUpTime,
+              pimSGRptILocalMembership,
+              pimSGRptIJoinPruneState,
+              pimSGRptIPrunePendingTimer,
+              pimSGRptIPruneExpiryTimer
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of PIM
+            routers running PIM-SM (Sparse Mode).  The groups
+            pimSsmGroup and pimRPConfigGroup are also required."
+    ::= { pimMIBGroups 7 }
+
+pimBidirGroup OBJECT-GROUP
+    OBJECTS { pimInterfaceDFElectionRobustness,
+              pimBidirDFElectionWinnerAddressType,
+              pimBidirDFElectionWinnerAddress,
+              pimBidirDFElectionWinnerUpTime,
+              pimBidirDFElectionWinnerMetricPref,
+              pimBidirDFElectionWinnerMetric,
+              pimBidirDFElectionState,
+              pimBidirDFElectionStateTimer
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of PIM
+            routers running BIDIR mode.  The groups pimSsmGroup,
+            pimSmGroup and pimRPConfigGroup are also required."
+    ::= { pimMIBGroups 8 }
+
+pimAnycastRpGroup OBJECT-GROUP
+    OBJECTS { pimAnycastRPSetLocalRouter,
+              pimAnycastRPSetRowStatus,
+              pimAnycastRPSetStorageType
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support management of the PIM
+            Anycast-RP mechanism."
+    ::= { pimMIBGroups 9 }
+
+pimStaticRPPrecedenceGroup OBJECT-GROUP
+    OBJECTS { pimStaticRPPrecedence }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to allow fine control of
+            interactions between static RP configuration and
+            dynamically acquired group to RP mappings."
+    ::= { pimMIBGroups 10 }
+
+pimNetMgmtNotificationObjects OBJECT-GROUP
+    OBJECTS { pimInvalidRegisterNotificationPeriod,
+              pimInvalidRegisterMsgsRcvd,
+              pimInvalidRegisterAddressType,
+              pimInvalidRegisterOrigin,
+              pimInvalidRegisterGroup,
+              pimInvalidRegisterRp,
+              pimInvalidJoinPruneNotificationPeriod,
+              pimInvalidJoinPruneMsgsRcvd,
+              pimInvalidJoinPruneAddressType,
+              pimInvalidJoinPruneOrigin,
+              pimInvalidJoinPruneGroup,
+              pimInvalidJoinPruneRp,
+              pimRPMappingNotificationPeriod,
+              pimRPMappingChangeCount,
+              pimInterfaceElectionNotificationPeriod,
+              pimInterfaceElectionWinCount
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support notification of PIM
+            network management events."
+    ::= { pimMIBGroups 11 }
+
+pimNetMgmtNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { pimInvalidRegister,
+                    pimInvalidJoinPrune,
+                    pimRPMappingChange,
+                    pimInterfaceElection
+                  }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notifications for signaling PIM network
+            management events."
+    ::= { pimMIBGroups 12 }
+
+pimDiagnosticsGroup OBJECT-GROUP
+    OBJECTS { pimInAsserts,
+              pimOutAsserts,
+              pimLastAssertInterface,
+              pimLastAssertGroupAddressType,
+              pimLastAssertGroupAddress,
+              pimLastAssertSourceAddressType,
+              pimLastAssertSourceAddress,
+              pimNeighborLossNotificationPeriod,
+              pimNeighborLossCount
+            }
+    STATUS  current
+    DESCRIPTION
+            "Objects providing additional diagnostics related to a PIM
+            router."
+    ::= { pimMIBGroups 13 }
+
+pimDmGroup OBJECT-GROUP
+    OBJECTS {
+              pimRefreshInterval,
+              pimInterfacePruneLimitInterval,
+              pimInterfaceGraftRetryInterval,
+              pimInterfaceSRPriorityEnabled,
+              pimNeighborSRCapable,
+              pimSGUpstreamPruneState,
+              pimSGUpstreamPruneLimitTimer,
+              pimSGOriginatorState,
+              pimSGSourceActiveTimer,
+              pimSGStateRefreshTimer
+            }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects required for management of PIM
+            Dense Mode (PIM-DM) function.  The groups pimSsmGroup and
+            pimSmGroup are also required."
+    REFERENCE "RFC 3973"
+    ::= { pimMIBGroups 14 }
+
+pimDeviceStorageGroup OBJECT-GROUP
+    OBJECTS { pimDeviceConfigStorageType
+            }
+    STATUS  current
+    DESCRIPTION
+            "An object that specifies the volatility of global PIM
+            configuration settings on this device."
+    ::= { pimMIBGroups 15 }
+
+END
diff --git a/snmp_builder/mibs/PINT-MIB.mib b/snmp_builder/mibs/PINT-MIB.mib
new file mode 100644
index 0000000..50e5849
--- /dev/null
+++ b/snmp_builder/mibs/PINT-MIB.mib
@@ -0,0 +1,573 @@
+PINT-MIB DEFINITIONS ::= BEGIN
+
+         IMPORTS
+          OBJECT-TYPE, Counter32, MODULE-IDENTITY, mib-2
+         FROM   SNMPv2-SMI
+         TEXTUAL-CONVENTION
+         FROM SNMPv2-TC
+         MODULE-COMPLIANCE, OBJECT-GROUP
+         FROM SNMPv2-CONF
+         sysApplInstallPkgEntry
+         FROM SYSAPPL-MIB
+         SnmpAdminString
+         FROM SNMP-FRAMEWORK-MIB;  -- RFC 2571 [2]
+
+         pintMib MODULE-IDENTITY
+         LAST-UPDATED "200102010000Z" -- 1 Feb 2001
+
+ORGANIZATION "IETF PINT Working Group"
+CONTACT-INFO "
+        Chairs:  Steve Bellovin
+                    E-mail: smb@research.att.com
+
+                    Igor Faynberg
+                    E-mail: faynberg@lucent.com
+
+        Authors: Murali Krishnaswamy
+                     Postal: 20 Corporate Place South
+                                Piscataway, NJ 08854
+                                Tel:    +1 (732)465-1000
+
+                                E-mail: murali@photuris.com
+
+                                Dan Romascanu
+                                Postal: Atidim Technology Park, Bldg 3
+                                Tel Aviv, Israel
+                                Tel:    +972 3 6458414
+                                E-mail: dromasca@avaya.com
+
+        General Discussion:pint@lists.bell-labs.com
+        To Subscribe: pint-request@lists.bell-labs.com
+        In Body: subscribe your-email-addres
+        Archive: http://www.bell-labs.com/mailing-lists/pint/
+        "
+DESCRIPTION
+    "This MIB defines the objects necessary to monitor
+     PINT Services"
+
+-- Revision history
+
+REVISION "200102010000Z" -- 1 Feb 2001
+DESCRIPTION
+    "Initial version, published as RFC 3055."
+::= { mib-2 93 }
+
+PintServiceType ::= TEXTUAL-CONVENTION
+        STATUS      current
+        DESCRIPTION
+            "This TC describes the type of a PINT service."
+        SYNTAX  INTEGER {
+                r2C(1),     -- Request-to-Talk
+                r2F(2),     -- Request-to-Fax
+                r2FB(3),    -- Request-to-Fax-Back
+                r2HC(4)     -- Request-to-Hear-Content
+        }
+
+PintPerfStatPeriod ::= TEXTUAL-CONVENTION
+STATUS      current
+DESCRIPTION
+    "This TC describes the statistics period of time.
+
+    Note that the values of the counters indexed with a value
+    SinceReboot(4) can be potentially affected by a counter rollover.
+    It is the responsibility of the application using this object to
+    take into account that the counter has been zeroed each time it
+    reached a value of (2**32-1)."
+SYNTAX  INTEGER {
+last30sec(1),   -- Performance Statics for the last 30 sec
+
+last15min(2),   --    15 min
+last24Hr(3),    --    24 Hour
+sinceReboot(4)  --    Since the time the pint server was
+--      last rebooted
+}
+
+pintServerConfig        OBJECT IDENTIFIER ::= { pintMib 1 }
+pintServerMonitor       OBJECT IDENTIFIER ::= { pintMib 2 }
+pintMibConformance      OBJECT IDENTIFIER ::= { pintMib 3 }
+
+-- pintServerConfig - PINT configuration MIB variables
+
+pintReleaseNumber OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+     "An indication of version of the PINT protocol supported
+     by this agent."
+    ::= { pintServerConfig 1 }
+
+pintSysContact           OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+     "Contact information related to the administration of the PINT
+     services."
+    ::= { pintServerConfig 2 }
+
+pintApplInstallPkgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PintApplInstallPkgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Table describing the PINT applications that are installed."
+    ::= { pintServerConfig 3 }
+
+pintApplInstallPkgEntry OBJECT-TYPE
+    SYNTAX      PintApplInstallPkgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Entries per PINT Application."
+    AUGMENTS { sysApplInstallPkgEntry }
+    ::= { pintApplInstallPkgTable 1 }
+
+PintApplInstallPkgEntry ::= SEQUENCE {
+
+pintApplInstallPkgDescription    SnmpAdminString
+}
+
+pintApplInstallPkgDescription OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS        current
+    DESCRIPTION
+     "Textual description of the installed PINT application."
+    ::= { pintApplInstallPkgEntry 1 }
+
+pintRegisteredGatewayTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PintRegisteredGatewayEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Table describing the registered gateway applications."
+    ::= { pintServerConfig 4 }
+
+pintRegisteredGatewayEntry OBJECT-TYPE
+    SYNTAX      PintRegisteredGatewayEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Entries per Registered Gateway Application."
+AUGMENTS { sysApplInstallPkgEntry  }
+    ::= { pintRegisteredGatewayTable 1 }
+
+PintRegisteredGatewayEntry ::= SEQUENCE {
+pintRegisteredGatewayName       SnmpAdminString,
+pintRegisteredGatewayDescription SnmpAdminString
+}
+
+pintRegisteredGatewayName OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS read-only
+    STATUS        current
+    DESCRIPTION
+     "Name of the registered gateway."
+    ::= { pintRegisteredGatewayEntry 1 }
+
+pintRegisteredGatewayDescription OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS        current
+    DESCRIPTION
+     "Textual description of the registered gateway."
+    ::= { pintRegisteredGatewayEntry 2 }
+
+-- pintServerMonitor - PINT monitoring statistics MIB variables
+
+pintServerGlobalPerf    OBJECT IDENTIFIER ::= {pintServerMonitor 1 }
+pintServerClientPerf    OBJECT IDENTIFIER ::= {pintServerMonitor 2 }
+pintServerUserIdPerf    OBJECT IDENTIFIER ::= {pintServerMonitor 3 }
+pintServerGatewayPerf   OBJECT IDENTIFIER ::= {pintServerMonitor 4 }
+
+pintServerGlobalStatsTable      OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PintServerGlobalStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Table displaying the monitored global server statistics."
+    ::= { pintServerGlobalPerf 1 }
+
+pintServerGlobalStatsEntry OBJECT-TYPE
+    SYNTAX      PintServerGlobalStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Entries in the global statistics table.
+     One entry is defined for each monitored service type and
+     performance statistics collection period."
+    INDEX {pintServerServiceTypeIndex, pintServerPerfStatPeriodIndex}
+    ::= { pintServerGlobalStatsTable 1 }
+
+PintServerGlobalStatsEntry      ::=  SEQUENCE {
+pintServerServiceTypeIndex                           PintServiceType,
+pintServerPerfStatPeriodIndex                        PintPerfStatPeriod,
+pintServerGlobalCallsReceived                        Counter32,
+pintServerGlobalSuccessfulCalls                      Counter32,
+pintServerGlobalDisconnectedCalls                    Counter32,
+pintServerGlobalDisCUAutFCalls                       Counter32,
+pintServerGlobalDisServProbCalls                     Counter32,
+pintServerGlobalDisGatProbCalls         Counter32
+}
+
+pintServerServiceTypeIndex OBJECT-TYPE
+    SYNTAX     PintServiceType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "The unique identifier of the monitored service."
+    ::= { pintServerGlobalStatsEntry 1 }
+
+pintServerPerfStatPeriodIndex OBJECT-TYPE
+    SYNTAX     PintPerfStatPeriod
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "Time period for which the performance statistics are requested
+     from the pint server."
+    ::= { pintServerGlobalStatsEntry 2 }
+
+pintServerGlobalCallsReceived OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of received global calls."
+    ::= { pintServerGlobalStatsEntry 3 }
+
+pintServerGlobalSuccessfulCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of global successful calls."
+    ::= { pintServerGlobalStatsEntry 4 }
+
+pintServerGlobalDisconnectedCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of global disconnected (failed) calls."
+    ::= { pintServerGlobalStatsEntry 5 }
+
+pintServerGlobalDisCUAutFCalls
+OBJECT-TYPE
+SYNTAX     Counter32
+MAX-ACCESS read-only
+STATUS     current
+DESCRIPTION
+    "Number of global calls that were disconnected because of client
+    or user authorization failure."
+::= { pintServerGlobalStatsEntry 6 }
+
+pintServerGlobalDisServProbCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of global calls that were disconnected because of
+     server problems."
+    ::= { pintServerGlobalStatsEntry 7 }
+
+pintServerGlobalDisGatProbCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of global calls that were disconnected because of
+     gateway problems."
+    ::= { pintServerGlobalStatsEntry 8 }
+
+pintServerClientStatsTable      OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PintServerClientStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Table displaying the monitored server client statistics."
+    ::= { pintServerClientPerf 1 }
+
+pintServerClientStatsEntry OBJECT-TYPE
+    SYNTAX      PintServerClientStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Entries in the client server statistics table.
+     One entry is defined for each client identified by name,
+     monitored service type and performance statistics collection
+     period."
+    INDEX {pintServerClientAddress, pintServerServiceTypeIndex,
+    pintServerPerfStatPeriodIndex}
+    ::= { pintServerClientStatsTable 1 }
+
+PintServerClientStatsEntry      ::=  SEQUENCE {
+pintServerClientAddress                              SnmpAdminString,
+pintServerClientCallsReceived                           Counter32,
+pintServerClientSuccessfulCalls                         Counter32,
+pintServerClientDisconnectedCalls                       Counter32,
+pintServerClientDisCAutFCalls                           Counter32,
+pintServerClientDisEFProbCalls                          Counter32
+}
+
+pintServerClientAddress OBJECT-TYPE
+    SYNTAX     SnmpAdminString
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "The unique identifier of the monitored client
+     identified by its address represented as as a string."
+    ::= { pintServerClientStatsEntry 1 }
+
+pintServerClientCallsReceived OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls received from the specific client."
+    ::= { pintServerClientStatsEntry 2 }
+
+pintServerClientSuccessfulCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls from the client successfully completed."
+    ::= { pintServerClientStatsEntry 3 }
+
+pintServerClientDisconnectedCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls received from the client, and that were
+     disconnected (failed)."
+    ::= { pintServerClientStatsEntry 4 }
+
+pintServerClientDisCAutFCalls
+OBJECT-TYPE
+SYNTAX     Counter32
+MAX-ACCESS read-only
+STATUS     current
+DESCRIPTION
+    "Number of calls from the client that were disconnected because of
+    client authorization failure."
+::= { pintServerClientStatsEntry 5 }
+
+pintServerClientDisEFProbCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls from the client that were disconnected because
+     of egress facility problems."
+    ::= { pintServerClientStatsEntry 6 }
+
+pintServerUserIdStatsTable      OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PintServerUserIdStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Table displaying the monitored Pint service user statistics."
+    ::= { pintServerUserIdPerf 1 }
+
+pintServerUserIdStatsEntry OBJECT-TYPE
+    SYNTAX      PintServerUserIdStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Entries in the user statistics table.
+     One entry is defined for each user identified by name,
+     each monitored service type and performance statistics collection
+     period.
+
+      It is assumed that the capabilities of the pint server
+      are enough to accommodate the number of entries in this table.
+      It is a local server implementation issue if an aging mechanism
+      Is implemented in order to avoid scalability problems."
+    INDEX {pintServerUserIdName, pintServerServiceTypeIndex,
+    pintServerPerfStatPeriodIndex}
+    ::= { pintServerUserIdStatsTable 1 }
+
+PintServerUserIdStatsEntry      ::=  SEQUENCE {
+pintServerUserIdName                                   SnmpAdminString,
+pintServerUserIdCallsReceived                           Counter32,
+pintServerUserIdSuccessfulCalls                         Counter32,
+pintServerUserIdDisconnectedCalls                       Counter32,
+pintServerUserIdDiscUIdAFailCalls                       Counter32,
+pintServerUserIdEFProbCalls                             Counter32
+}
+
+pintServerUserIdName OBJECT-TYPE
+    SYNTAX     SnmpAdminString (SIZE(0..64))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+     "The unique identifier of the monitored user
+     identified by its name."
+    ::= { pintServerUserIdStatsEntry 1 }
+
+pintServerUserIdCallsReceived OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls received from the specific user."
+    ::= { pintServerUserIdStatsEntry 2 }
+
+pintServerUserIdSuccessfulCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls from the user successfully completed."
+    ::= { pintServerUserIdStatsEntry 3 }
+
+pintServerUserIdDisconnectedCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls received from the user that were
+     disconnected (failed)."
+    ::= { pintServerUserIdStatsEntry 4 }
+
+pintServerUserIdDiscUIdAFailCalls
+OBJECT-TYPE
+SYNTAX     Counter32
+MAX-ACCESS read-only
+STATUS     current
+DESCRIPTION
+    "Number of calls from the user that were disconnected because of
+    user authorization failure."
+::= { pintServerUserIdStatsEntry 5 }
+
+pintServerUserIdEFProbCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls from the user that were disconnected because of
+     egress facility problems."
+    ::= { pintServerUserIdStatsEntry 6 }
+
+pintServerGatewayStatsTable     OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PintServerGatewayStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Table displaying the monitored gateway statistics."
+    ::= { pintServerGatewayPerf 1 }
+
+pintServerGatewayStatsEntry OBJECT-TYPE
+    SYNTAX      PintServerGatewayStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+     "Entries in the gateway table.
+     One entry is defined for each gateway identified by name,
+     each monitored service type and performance statistics collection
+     period."
+    INDEX { pintRegisteredGatewayName, pintServerServiceTypeIndex,
+    pintServerPerfStatPeriodIndex }
+    ::= { pintServerGatewayStatsTable 1 }
+
+PintServerGatewayStatsEntry     ::=  SEQUENCE {
+pintServerGatewayCallsReceived                  Counter32,
+pintServerGatewaySuccessfulCalls                Counter32,
+pintServerGatewayDisconnectedCalls              Counter32
+}
+
+pintServerGatewayCallsReceived OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls received at the specified gateway."
+    ::= { pintServerGatewayStatsEntry 1 }
+
+pintServerGatewaySuccessfulCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls successfully completed at the specified gateway."
+    ::= { pintServerGatewayStatsEntry 2 }
+
+pintServerGatewayDisconnectedCalls OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+     "Number of calls that were disconnected (failed) at the specified
+     gateway."
+    ::= { pintServerGatewayStatsEntry 3 }
+
+--
+-- Notifications Section
+-- (none defined)
+--
+
+--
+-- Conformance Section
+
+--
+
+pintMibCompliances OBJECT IDENTIFIER ::= { pintMibConformance 1 }
+pintMibGroups      OBJECT IDENTIFIER ::= { pintMibConformance 2 }
+
+pintMibCompliance MODULE-COMPLIANCE
+STATUS  current
+DESCRIPTION
+    "Describes the requirements for conformance to the
+    PINT MIB."
+MODULE  -- this module
+MANDATORY-GROUPS { pintMibConfigGroup, pintMibMonitorGroup }
+::= { pintMibCompliances 1 }
+
+pintMibConfigGroup OBJECT-GROUP
+OBJECTS {
+pintReleaseNumber,
+pintSysContact,
+pintApplInstallPkgDescription,
+pintRegisteredGatewayName,
+pintRegisteredGatewayDescription
+}
+STATUS  current
+DESCRIPTION
+    "A collection of objects providing configuration
+    information
+    for a PINT Server."
+::= { pintMibGroups 1 }
+
+pintMibMonitorGroup OBJECT-GROUP
+OBJECTS {
+pintServerGlobalCallsReceived,
+pintServerGlobalSuccessfulCalls,
+pintServerGlobalDisconnectedCalls,
+pintServerGlobalDisCUAutFCalls,
+pintServerGlobalDisServProbCalls,
+pintServerGlobalDisGatProbCalls,
+pintServerClientCallsReceived,
+pintServerClientSuccessfulCalls,
+pintServerClientDisconnectedCalls,
+pintServerClientDisCAutFCalls,
+pintServerClientDisEFProbCalls,
+--pintServerUserIdName,
+pintServerUserIdCallsReceived,
+pintServerUserIdSuccessfulCalls,
+pintServerUserIdDisconnectedCalls,
+pintServerUserIdDiscUIdAFailCalls,
+pintServerUserIdEFProbCalls,
+pintServerGatewayCallsReceived,
+pintServerGatewaySuccessfulCalls,
+pintServerGatewayDisconnectedCalls
+}
+STATUS  current
+DESCRIPTION
+    "A collection of objects providing monitoring
+    information
+    for a PINT Server."
+::= { pintMibGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/PKT-STORM-CTRL-MIB.mib b/snmp_builder/mibs/PKT-STORM-CTRL-MIB.mib
new file mode 100644
index 0000000..4c5f618
--- /dev/null
+++ b/snmp_builder/mibs/PKT-STORM-CTRL-MIB.mib
@@ -0,0 +1,269 @@
+PKT-STORM-CTRL-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY,OBJECT-TYPE,IpAddress, Unsigned32,Integer32
+                                        FROM SNMPv2-SMI
+        MacAddress, RowStatus           FROM SNMPv2-TC
+        DisplayString                   FROM RFC1213-MIB
+    	SnmpAdminString					FROM SNMP-FRAMEWORK-MIB
+
+        dlink-common-mgmt				FROM DLINK-ID-REC-MIB;
+
+
+
+    swPktStormMIB MODULE-IDENTITY
+	    LAST-UPDATED "0007150000Z"
+	    ORGANIZATION " "
+	    CONTACT-INFO
+	        "    "
+	    DESCRIPTION
+		    "The Structure of packet storm control management for the
+		    proprietary enterprise."
+        ::= { dlink-common-mgmt 25 }
+
+   PortList                ::= OCTET STRING(SIZE (0..127))
+
+   swPktStormCtrl            OBJECT IDENTIFIER ::= { swPktStormMIB 1 }
+   swPktStormInfo			       OBJECT IDENTIFIER ::= { swPktStormMIB 2 }
+   swPktStormMgmt            OBJECT IDENTIFIER ::= { swPktStormMIB 3 }
+   swPktStormNotify			     OBJECT IDENTIFIER ::= { swPktStormMIB 5 }
+--*********************************************************
+--swPktStormCtrl  OBJECT IDENTIFIER ::= { swPktStormMIB 1 }
+--*********************************************************
+
+--swPktStormRecover  OBJECT-TYPE
+--        SYNTAX  PortList
+--        MAX-ACCESS  read-write
+--        STATUS  current
+--        DESCRIPTION
+--            "Manually recover port from disabled state.If a port is disabled repeatedly up to 6 times,
+--            this port will be disabled forever. This command recover it manually."
+--        ::= { swPktStormCtrl 1 }
+
+swPktStormTrapCtrl OBJECT-TYPE
+	    SYNTAX  INTEGER {
+	           none          (1),
+		 		 		 stormOccurred (2),
+		 		 		 stormCleared  (3),
+		 		 		 both          (4)
+	            }
+	    MAX-ACCESS  read-write
+	    STATUS  current
+	    DESCRIPTION
+	        "This object controls when a storm control notification will be generated.
+
+		    If the object is set to
+		    none(1): no notificationswill be generated.
+			stormOccurred(2):
+			stormCleared(3):A notification will be generated when a storm event is
+			                detected or cleared  respectively.
+		    both(4): a notification  will be generated both when a storm event is detected and
+		             cleared.
+
+		    NOTE:The default value of this object is none(1). "
+	    ::= { swPktStormCtrl 2}
+
+-- **************************************************************************
+--  swPktStormCtrlTable            OBJECT IDENTIFIER ::= { swPktStormMIB 2 }
+-- **************************************************************************
+
+    swPktStormCtrlTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SwPktStormCtrlEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A table that contains information about packet storm control.
+            S/W mechanism is provided to monitor the traffic rate in addition
+            to the H/W storm control mechanism. If traffic rate is too high,
+            this port will be shut down. When action of packet storm control
+            is drop, port's information will be applied to all block members.
+            (port 1-8 belong to 1 block,....)"
+        ::= { swPktStormMgmt 1 }
+
+    swPktStormCtrlEntry OBJECT-TYPE
+        SYNTAX  SwPktStormCtrlEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A list of information for each port of the device."
+        INDEX   { swPktStormCtrlPortIndex }
+        ::= { swPktStormCtrlTable 1 }
+
+    SwPktStormCtrlEntry ::=
+        SEQUENCE {
+            swPktStormCtrlPortIndex
+                INTEGER,
+--            swPktStormCtrlthreshold
+--                Integer32,
+            swPktStormCtrlBroadcastStatus
+                INTEGER,
+            swPktStormCtrlMulticastStatus
+                INTEGER,
+            swPktStormCtrlUnicastStatus
+                INTEGER,
+            swPktStormCtrlActionStatus
+                INTEGER,
+            swPktStormCtrlCountDown
+                INTEGER,
+            swPktStormCtrlTimeinterval
+                INTEGER,
+            swPktStormCtrlShutdownForever
+                INTEGER,
+            swPktStormCtrlBCastThreshold
+                INTEGER,
+            swPktStormCtrlMCastThreshold
+                INTEGER,
+            swPktStormCtrlUnicastThreshold
+                INTEGER
+        }
+
+    swPktStormCtrlPortIndex  OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+        "This object indicates the device's port number.(1..Max port
+        number in the device).Used to specify a range of ports to be
+        configured."
+    ::= { swPktStormCtrlEntry 1 }
+
+--    swPktStormCtrlthreshold  OBJECT-TYPE
+--        SYNTAX  Integer32
+--        MAX-ACCESS  read-write
+--        STATUS  obsolete
+--        DESCRIPTION
+--        "The upper threshold at which the specified storm control will turn on. ."
+--    ::= { swPktStormCtrlEntry 2 }
+
+    swPktStormCtrlBroadcastStatus  OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    disabled(1),
+                    enabled(2)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "This object indicates the broadcast strom control enabled or disabled."
+    ::= { swPktStormCtrlEntry 3 }
+
+    swPktStormCtrlMulticastStatus  OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    disabled(1),
+                    enabled(2)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "This object indicates the multicast strom control enabled or disabled."
+    ::= { swPktStormCtrlEntry 4 }
+
+    swPktStormCtrlUnicastStatus  OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    disabled(1),
+                    enabled(2)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "This object indicates the unicast(Destination Loopback Fail) strom control enabled
+         or disabled."
+    ::= { swPktStormCtrlEntry 5 }
+
+   swPktStormCtrlActionStatus  OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    shutdown(1),
+                    drop(2)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "There are two actions to take for strom control, shutdown and drop. The
+        former is implemented in S/W, and the latter is implemented in H/W. If user
+        choose shutdown, Needs configure countdown and time_interval as well."
+    ::= { swPktStormCtrlEntry 6 }
+
+    swPktStormCtrlCountDown  OBJECT-TYPE
+        SYNTAX  INTEGER (0..30)
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "If packet storm has been encountered continuously on given port for a long
+        period of time (indicated by the value of this object), the port will be shut
+        down forever until it's recovered manually.The range of the countdown time is
+        5-30 minutes. User can configure countdown to 0 to disable the function of shutdown
+        forever.If set this value from 1 to 4 will get 'bad value' return code."
+    ::= { swPktStormCtrlEntry 7 }
+
+    swPktStormCtrlTimeinterval  OBJECT-TYPE
+        SYNTAX  INTEGER (5..30)
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "The sampling interval of received packet counts. The possible value will be 5~30 seconds."
+    ::= { swPktStormCtrlEntry 8 }
+
+    swPktStormCtrlShutdownForever  OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    yes(1),
+                    no(2)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+        "This object indicates thestrom control whether or not shutted down forever."
+    ::= { swPktStormCtrlEntry 9 }
+
+    swPktStormCtrlBCastThreshold  OBJECT-TYPE
+        SYNTAX  INTEGER (0..255000)
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "The upper threshold at which the specified storm control will turn on. ."
+    ::= { swPktStormCtrlEntry 10 }
+
+    swPktStormCtrlMCastThreshold  OBJECT-TYPE
+        SYNTAX  INTEGER (0..255000)
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "The upper threshold at which the specified storm control will turn on. ."
+    ::= { swPktStormCtrlEntry 11 }
+
+    swPktStormCtrlUnicastThreshold  OBJECT-TYPE
+        SYNTAX  INTEGER (0..255000)
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "The upper threshold at which the specified storm control will turn on. ."
+    ::= { swPktStormCtrlEntry 12 }
+
+
+-- *****************************************************************************************
+
+	swPktStormNotifyPrefix OBJECT IDENTIFIER ::= { swPktStormNotify 0 }
+
+    swPktStormOccurred NOTIFICATION-TYPE
+        OBJECTS         { swPktStormCtrlPortIndex
+                        }
+        STATUS  current
+        DESCRIPTION
+            "The trap is sent when packet storm is detected by packet storm mechanism and take
+             shutdown as action. "
+
+        ::= { swPktStormNotifyPrefix 1 }
+
+    swPktStormCleared NOTIFICATION-TYPE
+        OBJECTS         { swPktStormCtrlPortIndex
+                        }
+        STATUS  current
+        DESCRIPTION
+            "The trap is sent when the packet storm is cleared by packet storm mechanism. "
+
+        ::= { swPktStormNotifyPrefix 2 }
+
+END
diff --git a/snmp_builder/mibs/PKTC-IETF-EVENT-MIB.mib b/snmp_builder/mibs/PKTC-IETF-EVENT-MIB.mib
new file mode 100644
index 0000000..2527504
--- /dev/null
+++ b/snmp_builder/mibs/PKTC-IETF-EVENT-MIB.mib
@@ -0,0 +1,1163 @@
+PKTC-IETF-EVENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Unsigned32,
+    NOTIFICATION-TYPE,
+    mib-2                            FROM SNMPv2-SMI
+
+    TruthValue,
+    DateAndTime, TEXTUAL-CONVENTION
+                                     FROM SNMPv2-TC
+    SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE,
+    NOTIFICATION-GROUP               FROM SNMPv2-CONF
+    ifPhysAddress                    FROM IF-MIB
+    InetAddressType,
+    InetAddress,
+    InetPortNumber                   FROM INET-ADDRESS-MIB
+    snmpTargetBasicGroup, snmpTargetResponseGroup
+                                     FROM SNMP-TARGET-MIB
+    snmpNotifyGroup, snmpNotifyFilterGroup
+                                     FROM SNMP-NOTIFICATION-MIB
+    SyslogSeverity, SyslogFacility   FROM SYSLOG-TC-MIB;
+
+pktcIetfEventMib MODULE-IDENTITY
+    LAST-UPDATED "200903300000Z" -- 30 March 2009
+    ORGANIZATION "IETF IP over Cable Data Network Working Group"
+    CONTACT-INFO
+            "Sumanth Channabasappa
+             Cable Television Laboratories, Inc.
+             858 Coal Creek Circle,
+             Louisville, CO 80027, USA
+             +1 303-661-3307
+             Sumanth@cablelabs.com
+
+             Wim De Ketelaere
+             tComLabs
+             Gildestraat 8
+             9000 Gent, Belgium
+             +32 9 269 22 90
+             deketelaere@tComLabs.com
+
+             Eugene Nechamkin
+             Broadcom Corporation
+             200 - 13711 International Place
+             Richmond, BC, V6V 2Z8, Canada
+             +1 604 233 8500
+             enechamkin@broadcom.com
+
+    IETF IPCDN Working Group
+         General Discussion: ipcdn@ietf.org
+         Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+         Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+         Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
+         Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"
+    DESCRIPTION
+        "This MIB module specifies the basic management objects
+         for managing events generated by the Multimedia
+         Terminal Adapter devices compliant with the PacketCable
+         and IPCablecom requirements.
+
+         Copyright (c) 2009 IETF Trust and the persons
+         identified as authors of the code.  All rights reserved.
+
+         Redistribution and use in source and binary forms, with or
+         without modification, are permitted provided that the
+         following conditions are met:
+
+         - Redistributions of source code must retain the above
+           copyright notice, this list of conditions and the
+           following disclaimer.
+
+         - Redistributions in binary form must reproduce the above
+           copyright notice, this list of conditions and the
+           following disclaimer in the documentation and/or other
+           materials provided with the distribution.
+
+         - Neither the name of Internet Society, IETF or IETF
+           Trust, nor the names of specific contributors, may be
+           used to endorse or promote products derived from this
+           software without specific prior written permission.
+
+         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+         CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
+         WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+         WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+         PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+         OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+         INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+
+         (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+         GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+         BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+         LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+         (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+         OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+         POSSIBILITY OF SUCH DAMAGE.
+
+         This version of this MIB module is part of RFC 5428;
+         see the RFC itself for full legal notices."
+
+    REVISION   "200903300000Z" -- 30 March 2009
+    DESCRIPTION
+       "Initial version, published as RFC 5428."
+::=  { mib-2 182 }
+
+SyslogSeverityMask ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+     "This textual convention represents a bit mask representing
+      the severity of the syslog events that can be generated.
+      It corresponds to the various severity levels associated
+      with syslog messages, as specified in 'The Syslog Protocol',
+      [RFC5424].
+
+           emerg           (0),  - emergency; system is unusable
+           alert           (1),  - action must be taken immediately
+           crit            (2),  - critical condition
+           err             (3),  - error condition
+           warning         (4),  - warning condition
+           notice          (5),  - normal but significant condition
+           info            (6),  - informational message
+           debug           (7)   - debug-level messages"
+       SYNTAX  BITS {
+               emerg(0),
+               alert(1),
+               crit(2),
+               err(3),
+               warning(4),
+               notice(5),
+               info(6),
+               debug(7)
+               }
+
+--
+--
+pktcEventNotifications OBJECT IDENTIFIER ::= { pktcIetfEventMib 0 }
+pktcEventMibObjects    OBJECT IDENTIFIER ::= { pktcIetfEventMib 1 }
+pktcEventConformance   OBJECT IDENTIFIER ::= { pktcIetfEventMib 2 }
+--
+--
+pktcEventControl   OBJECT IDENTIFIER ::= { pktcEventMibObjects 1 }
+pktcEventThrottle  OBJECT IDENTIFIER ::= { pktcEventMibObjects 2 }
+pktcEventStatus    OBJECT IDENTIFIER ::= { pktcEventMibObjects 3 }
+pktcEvents         OBJECT IDENTIFIER ::= { pktcEventMibObjects 4 }
+pktcEventLog       OBJECT IDENTIFIER ::= { pktcEventMibObjects 5 }
+
+---
+--   Event Reporting control objects
+---
+pktcEventReset  OBJECT-TYPE
+    SYNTAX  BITS {
+                resetEventLogTable(0),
+                resetEventTable(1)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object allows a management station to
+            clear the local log of generated events, reset the
+            management event descriptions, or both.
+
+            MTAs generate management events.  These events are stored
+            in the MIB table pktcEventLogTable.  If a management
+            station needs to clear all the current entries (e.g.,
+            after a troubleshooting operation is complete), it can
+            do so by setting the resetEventLogTable(0) bit to a
+            value of '1'.
+
+            The MTA is pre-configured with the events that it can
+            generate.  This is stored in the MIB table
+            pktcEventTable.  This table also contains the
+            descriptions associated with these events.  These
+            descriptions can be modified by a management station.
+            However, if the management station wishes to reset the
+            descriptions to factory defaults, it can do so by
+            setting the resetEventTable(1) bit to a value of '1'.
+
+            The MTA actions are summarized below:
+
+              Bit resetEventLogTable(0) set to a value of '1'
+               - delete all entries in pktcEventLogTable;
+
+               - reset the value of pktcEventLogIndex to '0'.
+
+              Bit resetEventTable(1) set to a value of '1'
+               - reset the pktcEventTable to the
+                 factory default values.
+
+              Bits resetEventLogTable(0) and resetEventTable(1)
+              set to a value of '1'
+               - perform the above actions as though they were
+                 performed individually (in any order).
+
+              Setting a reset bit to a value of '0' MUST NOT
+              result in any action.
+
+            The MTA MUST perform the above actions regardless of
+            persistence (i.e., storage in non-volatile memory).
+
+            The MTA MUST always return a value of '00' when
+            this MIB object is read.
+
+            A management station that resets tables using this MIB
+            object needs to be careful about the impact to other
+            management stations that may be reliant on the
+            information contained in the table(s) being reset.  For
+            example, say management station A creates a specific set
+            of event descriptions in the event table
+            (pktcEventTable) for debugging purposes and expects any
+            generated events to report the modified descriptions.  In
+            such a case, if another management station resets the
+            event table to factory defaults, any subsequent events
+            will not contain the modified descriptions expected by
+            management station A.  Such multi-manager contentions are
+            not addressed within this MIB module.  Thus, management
+            stations are RECOMMENDED to use this MIB object with
+            care and caution, and only when absolutely required."
+    ::= { pktcEventControl 1 }
+
+---
+-- syslog-specific MIB objects
+---
+
+pktcEventSyslog   OBJECT IDENTIFIER ::= { pktcEventControl 2 }
+
+pktcEventSyslogCapabilities  OBJECT-TYPE
+    SYNTAX  BITS {
+                formatBSDSyslog(0),
+                formatSyslogProtocol(1),
+                transportUDP(2),
+                transportTLS(3),
+                transportBEEP(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the MTA capabilities
+            for supporting the syslog protocol, specifically
+            the message formats and the transport protocols.
+
+            The BSD syslog message format is specified
+            in [RFC3164] (formatBSDSyslog), and the IETF
+            syslog protocol is specified in [RFC5424]
+            (formatSyslogProtocol).
+
+            The MTA MUST set the appropriate protocol and
+            transport bits, based on implementation."
+    REFERENCE
+            "The BSD syslog Protocol, [RFC3164];
+             The Syslog Protocol, [RFC5424];
+             Transmission of Syslog Messages over UDP, [RFC5426];
+             TLS Transport Mapping for Syslog, [RFC5425];
+             Reliable Delivery for syslog, [RFC3195]."
+    ::= { pktcEventSyslog 1 }
+
+pktcEventSyslogAddressType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object defines the Internet address type of
+            the syslog server specified by the MIB object
+            pktcEventSyslogAddress.  A value of dns(16) is
+            disallowed since a non-resolvable DNS domain name
+            will leave the device without a syslog server to
+            which it can report events."
+    REFERENCE
+            "PacketCable MTA Device Provisioning Specification,
+            [PKT-SP-PROV]."
+    DEFVAL { ipv4 }
+    ::= { pktcEventSyslog 2 }
+
+pktcEventSyslogAddress  OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the IP address of the
+
+            syslog server to which the MTA can transmit a syslog
+            message upon the generation of a management event.
+            The type of address this object represents is defined
+            by the MIB object pktDevEventSyslogAddressType.
+
+            The format of the syslog message is specified by the
+            MIB object pktcEventSyslogMessageFormat."
+    REFERENCE
+            "PacketCable MTA Device Provisioning Specification,
+            [PKT-SP-PROV];
+            PacketCable Management Event Mechanism Specification,
+            [PKT-SP-MEM1.5];"
+    DEFVAL { "0.0.0.0" }
+    ::= { pktcEventSyslog 3 }
+
+pktcEventSyslogMessageFormat OBJECT-TYPE
+    SYNTAX      INTEGER {
+                formatBSDSyslog(1),     -- The BSD syslog Protocol
+                formatSyslogProtocol(2) -- The syslog Protocol
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the syslog message format to
+             be used for transmitting syslog messages to the server
+             contained in the MIB object pktcEventSyslogServer."
+    REFERENCE
+            "The BSD syslog Protocol, [RFC3164];
+             The Syslog Protocol, [RFC5424]."
+    DEFVAL { formatSyslogProtocol }
+    ::= { pktcEventSyslog 4 }
+
+pktcEventSyslogTransport OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  udp(1),-- Transmission of syslog messages over UDP
+                  tls(2),-- TLS Transport Mapping for Syslog
+                  beep(3)-- BEEP Transport Mapping for Syslog
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object specifies the transport to be
+             used to transmit syslog messages to the syslog
+             server contained in the MIB object
+             pktcEventSyslogAddress.
+
+             If the MTA does not support the transport
+             specified in a SET operation, then the
+
+             MTA MUST return an appropriate error
+             response, such as 'inconsistentValue'."
+    REFERENCE
+            "Transmission of Syslog messages over UDP, [RFC5426];
+             TLS Transport Mapping for Syslog, [RFC5425]."
+    DEFVAL   {tls}
+    ::= { pktcEventSyslog 5 }
+
+pktcEventSyslogPort  OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the port number of the
+             syslog server to which the syslog messages are to
+             be transmitted."
+    REFERENCE
+            "Transmission of Syslog Messages over UDP, [RFC5426];
+             TLS Transport Mapping for Syslog, [RFC5425]."
+    DEFVAL { 6514 }
+    ::= { pktcEventSyslog 6 }
+
+---
+--  Event classes
+---
+
+pktcEventClassTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PktcEventClassEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This MIB table allows for management events that can be
+             generated by an MTA to be classified into categories,
+             or 'event classes'.  For example, all the configuration-
+             related events can be associated with an event class
+             titled 'configuration'.  Such a classification allows
+             for a management station to affect changes on a common
+             group of events at once.  Two operations are specified
+             on an event class: enabling or disabling of all the
+             events in an event class, and selective enabling or
+             disabling based on the severity level."
+    ::= { pktcEventControl 3 }
+
+pktcEventClassEntry OBJECT-TYPE
+    SYNTAX      PktcEventClassEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Each entry in this table specifies an event class, a
+             grouping of events, as identified by the MTA
+             manufacturer.  Any event associated with an event class
+             in this table MUST be specified in the
+             pktcEventTable.
+
+             The MTA MUST create one entry (index=100) for the event
+             class titled 'generic'.  This event class MUST contain
+             all the events that are not contained in any other
+             vendor-specified event classes.
+
+             A management station SHOULD NOT associate an event
+             with multiple event classes.  However, if an event is
+             associated with multiple event classes, the MTA
+             MUST give precedence to the event class with the
+             lowest index.  Thus, at a given point in time,
+             only one event class is applicable for an event.
+
+             The event table (pktcEventTable) provides the event
+             class that affects the event.  Whenever an event is
+             generated, the MTA MUST verify the applicable
+             event class entry to take any specified actions.
+
+             Entries in this table persist across resets and
+             reboots."
+    INDEX { pktcEventClassIndex }
+    ::= { pktcEventClassTable 1 }
+
+PktcEventClassEntry::= SEQUENCE {
+    pktcEventClassIndex           Unsigned32,
+    pktcEventClassName            SnmpAdminString,
+    pktcEventClassStatus          TruthValue,
+    pktcEventClassSeverity        SyslogSeverityMask
+    }
+
+pktcEventClassIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This MIB object is an index into the event
+         class table.  It is a locally meaningful
+         value."
+    ::= { pktcEventClassEntry 1 }
+
+pktcEventClassName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (1..100))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This MIB object contains the name of the
+         event class.
+
+         Vendors MAY define different event classes
+         (e.g., DHCP, SNMP, DEBUG) to group together
+         management events of a particular category.
+
+         Event class names need to take into
+         consideration the SnmpAdminString definition
+         requirements, such as the use of control code
+         sequence CR LF to represent a newline."
+    ::= { pktcEventClassEntry 2 }
+
+pktcEventClassStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This MIB object indicates if events belonging
+         to the corresponding event class are enabled
+         or disabled, for event reporting.
+
+         Setting this object to a value of 'true' enables
+         reporting of all the events in the event class.
+
+         When enabled, the means of reporting events is
+         specified by the MIB object pktcEventReporting.
+
+         Setting this object to a value of 'false' disables
+         any event reporting, irrespective of the value of the
+         MIB object pktcEventReporting for a specific
+         event.
+
+         The default value of this MIB object is vendor-
+         specific.  However, the vendor SHOULD enable all
+         event categories defined by PacketCable or
+         IPCablecom by default."
+    ::= { pktcEventClassEntry 3 }
+
+pktcEventClassSeverity OBJECT-TYPE
+    SYNTAX      SyslogSeverityMask
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This MIB object defines the severity level
+         of events belonging to a specific event class
+
+         that are enabled for event reporting.
+
+         This MIB object has no effect on the event
+         reporting unless the MIB object
+         pktcEventClassStatus is set to a value
+         of 'true' (enabled), for the corresponding
+         event class.
+
+         Setting a bit within the mask to a value of '1'
+         implies that events corresponding to that
+         severity level MUST be reported as defined by
+         the corresponding value of 'pktcEventReporting'
+         for events in the event class.
+
+         Setting a bit to a value of '0' implies that
+         events corresponding to that level MUST NOT be
+         reported, irrespective of the corresponding
+         value of 'pktcEventReporting' for events
+         in the event class.
+
+         It is recommended that the bits corresponding
+         to emerg(0), alert(1), crit(2), and err(3)
+         be set to a value of '1' to ensure reporting of
+         events requiring immediate attention."
+    REFERENCE
+            "The Syslog Protocol, [RFC5424]."
+    ::= { pktcEventClassEntry 4 }
+
+---
+--   Event throttling control
+---
+
+pktcEventThrottleAdminStatus  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                unconstrained(1),
+                maintainBelowThreshold(2),
+                stopAtThreshold(3),
+                inhibited(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object controls the throttling of the
+            transmitted messages upon generation of an event
+            (SNMP/syslog).  It does not affect local logging
+            of events.
+
+            A value of unconstrained(1) causes event messages
+
+            to be transmitted without regard to the threshold
+            settings.
+
+            A value of maintainBelowThreshold(2) causes event
+            messages to be suppressed if the number of
+            transmissions would otherwise exceed the threshold
+            specified by pktcEventThrottleThreshold over the
+            interval specified by pktcEventThrottleInterval.
+
+            A value of stopAtThreshold(3) causes event message
+            transmission to cease once the threshold specified
+            by pktcEventThrottleThreshold (over the interval
+            specified by pktcEventThrottleInterval) is reached.
+            Event generation is resumed when the value of this
+            MIB object is modified by a management station or
+            when the device resets or reboots.
+
+            A value of inhibited(4) causes all event message
+            transmissions to be suppressed.
+
+            An event causing both an SNMP and a syslog message
+            is still treated as a single event.
+
+            Refer to MIB objects pktcEventThrottleThreshold and
+            pktcEventThrottleInterval for information on
+            throttling."
+    DEFVAL { unconstrained }
+    ::= { pktcEventThrottle 1 }
+
+pktcEventThrottleThreshold  OBJECT-TYPE
+    SYNTAX      Unsigned32(0..1024)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the number of events per
+            pktcEventThrottleInterval to be transmitted before
+            throttling.
+
+            An event resulting in multiple actions (e.g., SNMP
+            and syslog) is still treated as a single event."
+    DEFVAL { 2 }
+    ::= { pktcEventThrottle 2 }
+
+pktcEventThrottleInterval  OBJECT-TYPE
+    SYNTAX      Unsigned32(0..604800)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the interval over which
+             the throttle threshold applies."
+    DEFVAL { 1 }
+    ::= { pktcEventThrottle 3 }
+
+---
+-- Reporting of transmission status
+---
+
+pktcEventTransmissionStatus OBJECT-TYPE
+    SYNTAX      BITS {
+                syslogThrottled(0),
+                snmpThrottled(1),
+                validsyslogServerAbsent(2),
+                validSnmpManagerAbsent(3),
+                syslogTransmitError(4),
+                snmpTransmitError(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object reflects the status of the event
+             transmissions using syslog, SNMP, or both.
+
+            If a bit corresponding to a state is set to a value
+            of:
+                '1', it indicates that the state is true
+                '0', it indicates that the state is false
+
+            If the MTA is not configured with a syslog server
+            or an SNMP Manager, the corresponding 'throttling'
+            and 'transmit error' bits MUST be set to a value of
+            '0'.  For example, if an SNMP Manager is not
+            configured on the MTA, the bit corresponding to
+            validSnmpManagerAbsent(3) is set to a value of '1',
+            and the values of the bits corresponding to
+            snmpThrottled(1) and snmpTransmitError(5) are set
+            to a value of '0'.
+
+            'Event throttling' is based on thresholds and the
+            current setting of the MIB object
+            pktcEventThrottleAdminStatus.
+
+            'Server/Manager' indicators are based on the
+            availability of valid syslog server/SNMP Managers.
+
+            Transmit errors are reported when detected.  If an
+            MTA cannot detect an error situation, the value of
+            the BIT will be set '0'.
+
+            It is to be noted that not all the conditions that are
+            indicated by this MIB object are detectable by all
+            devices, and when detected may not be accurate.  It is
+            meant to provide a report of the status as determined
+            by the device during event transmissions."
+    ::= { pktcEventStatus 1 }
+
+---
+-- Description of events
+---
+
+pktcEventTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PktcEventEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This MIB table contains all possible management events
+            that can be generated by the device.  This includes
+            PacketCable- and IPCablecom-defined events and
+            vendor-specific events."
+    ::= { pktcEvents 1 }
+
+pktcEventEntry OBJECT-TYPE
+    SYNTAX      PktcEventEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in this table is created for each
+            event the MTA implementing this MIB is
+            capable of reporting.  Entries in this table
+            are persisted across resets and reboots."
+    INDEX { pktcEventOrganization, pktcEventIdentifier }
+    ::= { pktcEventTable 1 }
+
+PktcEventEntry::= SEQUENCE {
+    pktcEventOrganization    Unsigned32,
+    pktcEventIdentifier      Unsigned32,
+    pktcEventFacility        SyslogFacility,
+    pktcEventSeverityLevel   SyslogSeverity,
+    pktcEventReporting       BITS,
+    pktcEventText            SnmpAdminString,
+    pktcEventClass           SnmpAdminString
+    }
+
+pktcEventOrganization OBJECT-TYPE
+    SYNTAX      Unsigned32(1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This MIB object provides the IANA enterprise number of
+            the organization defining the event.  Thus, all
+            PacketCable- or IPCablecom-defined events will contain
+            the PacketCable or IPCablecom IANA enterprise
+            number, and all vendor-specific events will contain
+            the IANA enterprise number of the defining
+            organization."
+    REFERENCE
+            "IANA Private Enterprise Number assignment,
+            [IANA-ENTERPRISE]."
+    ::= { pktcEventEntry 1 }
+
+pktcEventIdentifier OBJECT-TYPE
+    SYNTAX      Unsigned32(1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the event identifier for the
+            corresponding event."
+    REFERENCE
+            "PacketCable Management Event Mechanism Specification,
+            [PKT-SP-MEM1.5];
+            PacketCable MTA Device Provisioning Specification,
+            [PKT-SP-PROV]."
+    ::= { pktcEventEntry 2 }
+
+pktcEventFacility OBJECT-TYPE
+    SYNTAX      SyslogFacility
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the facility
+            for the event.
+            For PacketCable, IPCablecom, or ETSI events,
+            this MUST be set to a value of local0(16)."
+    REFERENCE
+            "The Syslog Protocol, [RFC5424];
+             Textual Conventions for Syslog Management,
+             [RFC5427]."
+    ::= { pktcEventEntry 3 }
+
+pktcEventSeverityLevel OBJECT-TYPE
+    SYNTAX      SyslogSeverity
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the severity level that
+            is applicable to the specified event."
+    REFERENCE
+            "The Syslog Protocol, [RFC5424];
+             Textual Conventions for Syslog Management,
+             [RFC5427]."
+    ::= { pktcEventEntry 4 }
+
+pktcEventReporting OBJECT-TYPE
+    SYNTAX      BITS {
+                local(0),
+                syslog(1),
+                snmpTrap(2),
+                snmpInform(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object defines the action to be taken on
+            occurrence of this event.  Bit local(0) refers to local
+            logging of events; bit sylog(1) refers to the
+            transmission of events using syslog; bit snmpTrap(2)
+            refers to the transmission of events using SNMP Traps
+            (SNMPv2-Trap-PDU); and bit snmpInform(3) refers to the
+            transmission of events using SNMP INFORMs.
+
+            Setting a bit to a value of '1' indicates that the
+            corresponding action will be taken upon occurrence of
+            this event.  If none of the bits are set, then no action
+            is taken upon occurrence of the event.  The success of
+            transmission using syslog and SNMP depends on the
+            MTA configuration.  For example, a valid syslog server
+            address is required for syslog message transmission.
+
+            Specification of a management event does not necessarily
+            include the actions to be taken upon its generation,
+            i.e., it does not need to specify if a generated event
+            needs to be transmitted via SNMP or syslog, or stored
+            locally.  Thus, certain default values are specified,
+            based on the event's severity level specified by the
+            MIB object pktcEventSeverityLevel, as follows:
+                - If the severity level of an event is emerg(0),
+                alert(1), crit(2), or err(3), set the bits for
+                local(0), syslog(1), and snmpInform(3) to a value
+                of '1' and set the remaining bits to a value of '0'.
+
+                - For an event with any other severity level, set
+                the bits for local(0) and syslog(1) to a value
+                of '1' and set the rest of the bits to a value
+                of '0'."
+    ::= { pktcEventEntry 5 }
+
+pktcEventText OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..127))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This MIB object provides a human-readable
+            description of the event.  Descriptions need
+            to take into consideration the SnmpAdminString
+            definition requirements such as the use of
+            control code sequence CR LF to represent a
+            newline."
+    ::= { pktcEventEntry 6 }
+
+pktcEventClass OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..100))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object represents the event class
+             that affects the event.  If an event is associated
+             with only one event class, then its name
+             (pktcEventClassName) is reported.  If an event
+             is associated with more than one event class,
+             then the name of the event class with the
+             lowest index in the event class table
+             (pktcEventClassTable) is reported.
+
+             See the MIB table pktcEventClassTable
+             for a description of event classes and usage.
+
+             Descriptions need to take into consideration the
+             SnmpAdminString definition requirements, such as
+             the use of control code sequence CR LF to
+             represent a newline."
+    ::= { pktcEventEntry 7 }
+
+---
+-- Log of generated events
+---
+
+pktcEventLogTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PktcEventLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This MIB table contains a log of the events
+            generated by the MTA.
+
+            A description of all the events that can be
+            generated by the device can be obtained from the
+            MIB table pktcEventTable.
+
+            An MTA is not required to persist the contents of this
+            table across resets."
+    ::= { pktcEventLog 1 }
+
+pktcEventLogEntry OBJECT-TYPE
+    SYNTAX      PktcEventLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Each entry in this table describes an event that
+            has occurred, indexed in the chronological order of
+            generation.  The details of the event are borrowed
+            from the parameters associated with the corresponding
+            event entry in pktcEventTable at the
+            time of the event generation.
+            While all entries created as such can be cleared using
+            the MIB object pktcEventReset, the event entries
+            themselves cannot be individually deleted."
+    INDEX { pktcEventLogIndex }
+    ::= { pktcEventLogTable 1 }
+
+PktcEventLogEntry ::= SEQUENCE {
+    pktcEventLogIndex             Unsigned32,
+    pktcEventLogTime              DateAndTime,
+    pktcEventLogOrganization      Unsigned32,
+    pktcEventLogIdentifier        Unsigned32,
+    pktcEventLogText              SnmpAdminString,
+    pktcEventLogEndpointName      SnmpAdminString,
+    pktcEventLogType              BITS,
+    pktcEventLogTargetInfo        SnmpAdminString,
+    pktcEventLogCorrelationId     Unsigned32,
+    pktcEventLogAdditionalInfo    SnmpAdminString
+    }
+
+pktcEventLogIndex OBJECT-TYPE
+    SYNTAX      Unsigned32(1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This MIB object provides relative ordering of the
+             objects in the event log.
+
+             If the MTA implements non-volatile storage,
+             then this object will always increase except when
+             the MIB object reaches a value of 2^32-1.
+
+             If the MTA does not implement non-volatile storage,
+             then this object will always increase except when
+             the MIB object reaches a value of 2^32-1 or the MTA
+             is reset.
+
+             When the value reaches 2^32-1, or an MTA that does
+             not implement non-volatile storage is reset,
+             newer events will be stored starting with an index
+             value of '1' (cyclic rotation)."
+    ::= { pktcEventLogEntry 1 }
+
+pktcEventLogTime OBJECT-TYPE
+    SYNTAX       DateAndTime
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "This MIB object provides a human-readable description
+            of the date and time at which the event occurred.
+            The value of the date and time contained in this MIB
+            object SHOULD reflect the date and time used in the
+            syslog message resulting from the associated event,
+            if such a syslog message was transmitted."
+    ::= { pktcEventLogEntry 2 }
+
+pktcEventLogOrganization OBJECT-TYPE
+    SYNTAX      Unsigned32(1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object provides the IANA enterprise number of
+            the organization defining the event.  Thus, all
+            PacketCable- or IPCablecom-defined events will contain
+            the CableLabs or IPCablecom IANA enterprise number, and
+            all vendor-specific events will contain the IANA
+            enterprise number of the defining organization."
+    ::= { pktcEventLogEntry 3 }
+
+pktcEventLogIdentifier OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the event identifier for the
+            corresponding event."
+    ::= { pktcEventLogEntry 4 }
+
+pktcEventLogText OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..127))
+    MAX-ACCESS  read-only
+    STATUS      current
+   DESCRIPTION
+            "This MIB object contains the contents of
+            the MIB object pktcEventText, corresponding
+            to the event, at the moment of generation."
+    ::= { pktcEventLogEntry 5 }
+
+pktcEventLogEndpointName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the unique identifier of the
+             MTA endpoint that generated the corresponding event.
+             If the generated event was not associated with
+             any specific endpoint on the MTA, then this MIB object
+             contains the MTA identifier.
+
+             An MTA endpoint can be uniquely identified using a
+             combination of the MTA identifier and the endpoint
+             number.  The MTA is identified via its Fully-Qualified
+             Domain Name (FQDN) and the associated IP address at
+             the given point in time.
+
+             The format of the value contained by this MIB object
+             is as follows:
+
+             aaln/n:<FQDN>/<IP>, when it identifies an endpoint,
+                                 'n' being the endpoint number;
+             or,
+             <FQDN>/<IP>, when it identifies an MTA.
+
+             The value contained by this MIB object needs to observe
+             the SnmpAdminString definition requirements."
+    ::= { pktcEventLogEntry 6 }
+
+pktcEventLogType OBJECT-TYPE
+    SYNTAX      BITS {
+
+                local(0),
+                syslog(1),
+                snmpTrap(2),
+                snmpInform(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the type of actions taken by
+             the MTA when the event indicated by the MIB object
+             pktcEventLogIdentifier occurred.
+
+             A bit with a value of '1' indicates the corresponding
+             action was taken.  Setting it to a value of '0'
+             indicates that the corresponding action was not taken.
+
+             An event may trigger one or more actions (e.g., syslog
+             and SNMP) or result only in a local log.  An action may
+             also be prevented due to throttling, in which case it is
+             not reported by this MIB object."
+    ::= { pktcEventLogEntry 7 }
+
+pktcEventLogTargetInfo OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains a comma-separated list of the
+            actions taken for external notifications, along with the
+            target IP address for the generated events.  Locally
+            stored events MUST NOT be recorded in this MIB object.
+
+            The syntax is as:
+            <action-1/IP>,<action-2/IP>,<action-3/IP>
+
+            Where <action-n/IP> is to be denoted as follows:
+              For syslog events:
+                     syslog/<IP address of the syslog server>
+              For SNMP traps:
+                     snmpTrap/<IP address of the SNMP server>
+              For SNMP INFORMS:
+                     snmpInform/<IP address of the SNMP server>
+
+             If there are multiple targets for the same type (SNMP
+             traps sent to multiple IP addresses) or if there are
+             multiple message types sent to the same IP (syslog and
+             SNMP sent to the same IP address), they need to be
+             reported individually.
+
+             It is to be noted that this MIB object may not be able
+             to store all the data in some cases (e.g., multiple
+             IPv6 addresses), in which case some actions may not be
+             reported.  In such cases, the MTA MUST present a value
+             of '...' at the end of the value.
+
+             Values contained by this MIB object need to observe the
+             SnmpAdminString definition requirements."
+    ::= { pktcEventLogEntry 8 }
+
+pktcEventLogCorrelationId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains the correlation ID
+            generated by the MTA during the initiation of the
+            last provisioning flow, within or following which
+            the event occurred.
+
+            Although a correlation ID once generated after MTA
+            reset does not change until next MTA reset, the
+            value of this object will differ for the events
+            preserved across MTA resets in case of a persistent
+            pktcEventLogTable.
+
+            For more information on the generation of correlation
+            IDs, refer to the corresponding PacketCable/IPCablecom
+            Device Provisioning specifications."
+    REFERENCE
+            "PacketCable MTA Device Provisioning Specification,
+            [PKT-SP-PROV]."
+    ::= { pktcEventLogEntry 9 }
+
+pktcEventLogAdditionalInfo OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This MIB object contains additional information
+            in relation to the corresponding event that an
+            MTA might wish to report, such as parameterized
+            data or debugging information.  The format is
+            vendor-specific.
+
+            If the MTA cannot provide any additional information for
+            the particular event generated, it MUST populate this
+
+            MIB object with a zero-length OCTET-STRING.  Vendors
+            providing this information need to observe the
+            SnmpAdminString definition requirements, such as the
+            use of control code sequence CR LF for newline."
+    ::= { pktcEventLogEntry 10 }
+
+---
+-- Notifications
+---
+
+pktcEventNotification NOTIFICATION-TYPE
+    OBJECTS {
+    pktcEventLogTime,
+    pktcEventLogOrganization,
+    pktcEventLogIdentifier,
+    pktcEventLogEndpointName,
+    pktcEventLogCorrelationId,
+    ifPhysAddress
+    }
+    STATUS      current
+    DESCRIPTION
+            "This Notification MIB object contains the contents for
+             event reporting.
+
+             It contains the event log time, the organization
+             ID, the event identifier, the endpoint identifier, the
+             correlation ID, and the MTA's MAC address."
+    ::= { pktcEventNotifications 1 }
+
+---
+-- Conformance/Compliance
+---
+
+pktcEventCompliances  OBJECT IDENTIFIER ::=
+                                      { pktcEventConformance  1 }
+pktcEventGroups       OBJECT IDENTIFIER ::=
+                                      { pktcEventConformance  2 }
+
+pktcEventBasicCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+            "The compliance statement for devices that implement
+            the event-reporting feature."
+
+    MODULE   --pktcIetfEventMib
+
+MANDATORY-GROUPS {
+                 pktcEventGroup,
+                 pktcEventNotificationGroup
+                 }
+
+       MODULE SNMP-TARGET-MIB
+           MANDATORY-GROUPS {
+               snmpTargetBasicGroup,
+               snmpTargetResponseGroup
+           }
+
+       MODULE SNMP-NOTIFICATION-MIB
+           MANDATORY-GROUPS {
+                snmpNotifyGroup,
+                snmpNotifyFilterGroup
+           }
+    ::= { pktcEventCompliances 3 }
+
+pktcEventGroup OBJECT-GROUP
+    OBJECTS {
+            pktcEventReset,
+            pktcEventSyslogCapabilities,
+            pktcEventSyslogAddressType,
+            pktcEventSyslogAddress,
+            pktcEventSyslogTransport,
+            pktcEventSyslogPort,
+            pktcEventSyslogMessageFormat,
+            pktcEventThrottleAdminStatus,
+            pktcEventThrottleThreshold,
+            pktcEventThrottleInterval,
+            pktcEventTransmissionStatus,
+            pktcEventFacility,
+            pktcEventSeverityLevel,
+            pktcEventReporting,
+            pktcEventText,
+            pktcEventLogTime,
+            pktcEventLogOrganization,
+            pktcEventLogIdentifier,
+            pktcEventLogText,
+            pktcEventLogEndpointName,
+            pktcEventLogType,
+            pktcEventLogTargetInfo,
+            pktcEventLogCorrelationId,
+            pktcEventLogAdditionalInfo,
+            pktcEventClass,
+            pktcEventClassName,
+            pktcEventClassStatus,
+            pktcEventClassSeverity
+         }
+    STATUS      current
+    DESCRIPTION
+            "Group of MIB objects for PacketCable Management Event
+            MIB."
+    ::= { pktcEventGroups 1 }
+
+pktcEventNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { pktcEventNotification }
+    STATUS      current
+    DESCRIPTION
+            "Group of MIB objects for notifications related to
+            change in status of the MTA Device."
+    ::= { pktcEventGroups 2 }
+END
diff --git a/snmp_builder/mibs/PKTC-IETF-MTA-MIB.mib b/snmp_builder/mibs/PKTC-IETF-MTA-MIB.mib
new file mode 100644
index 0000000..b1be998
--- /dev/null
+++ b/snmp_builder/mibs/PKTC-IETF-MTA-MIB.mib
@@ -0,0 +1,2081 @@
+PKTC-IETF-MTA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    OBJECT-IDENTITY,
+    Unsigned32,
+    Counter32,
+    NOTIFICATION-TYPE,
+    mib-2
+          FROM SNMPv2-SMI                    -- [RFC2578]
+    TEXTUAL-CONVENTION,
+    RowStatus,
+    TruthValue
+          FROM SNMPv2-TC                     -- [RFC2579]
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE,
+    NOTIFICATION-GROUP
+          FROM SNMPv2-CONF                   -- [RFC2580]
+    InetAddressType,
+    InetAddress
+          FROM INET-ADDRESS-MIB              -- [RFC4001]
+    sysDescr
+          FROM SNMPv2-MIB                    -- [RFC3418]
+    SnmpAdminString
+          FROM SNMP-FRAMEWORK-MIB            -- [RFC3411]
+    docsDevSoftwareGroupV2
+          FROM DOCS-CABLE-DEVICE-MIB         -- [RFC4639]
+    DocsX509ASN1DEREncodedCertificate,
+    docsBpi2CodeDownloadGroup
+          FROM DOCS-IETF-BPI2-MIB            -- [RFC4131]
+    LongUtf8String
+          FROM SYSAPPL-MIB                   -- [RFC2287]
+    ifPhysAddress
+          FROM IF-MIB;                       -- [RFC2863]
+
+    pktcIetfMtaMib MODULE-IDENTITY
+    LAST-UPDATED "200609180000Z" -- September 18, 2006
+    ORGANIZATION "IETF IP over Cable Data Network Working Group"
+    CONTACT-INFO
+        "Eugene Nechamkin
+         Broadcom Corporation,
+         200-13711 International Place,
+         Richmond, BC, V6V 2Z8
+         CANADA
+         Phone: +1 604 233 8500
+         Email: enechamkin@broadcom.com
+
+         Jean-Francois Mule
+         Cable Television Laboratories, Inc.
+         858 Coal Creek Circle
+         Louisville, CO 80027-9750
+         U.S.A.
+         Phone: +1 303 661 9100
+         Email: jf.mule@cablelabs.com
+
+    IETF IPCDN Working Group
+         General Discussion: ipcdn@ietf.org
+         Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+         Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+         Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
+         Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"
+    DESCRIPTION
+       "This MIB module defines the basic management object
+        for the Multimedia Terminal Adapter devices compliant
+        with PacketCable and IPCablecom requirements.
+
+        Copyright (C) The IETF Trust (2006).  This version of
+        this MIB module is part of RFC 4682; see the RFC itself for
+        full legal notices."
+
+    REVISION    "200609180000Z"   -- September 18, 2006
+    DESCRIPTION
+       "Initial version, published as RFC 4682."
+::=  { mib-2 140 }
+
+   -- Textual Conventions
+
+PktcMtaDevProvEncryptAlg  ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        " This textual convention defines various types of the
+          encryption algorithms used for the encryption of the MTA
+          configuration file.  The description of the encryption
+          algorithm for each enumerated value is as follows:
+
+          'none(0)'            no encryption is used,
+          'des64CbcMode(1)'    DES 64-bit key in CBC mode,
+          't3Des192CbcMode(2)' 3DES 192-bit key in CBC mode,
+          'aes128CbcMode(3)'   AES 128-bit key in CBC mode,
+          'aes256CbcMode(4)'   AES 256-bit key in CBC mode."
+    SYNTAX      INTEGER  {
+                none             (0),
+                des64CbcMode     (1),
+                t3Des192CbcMode  (2),
+                aes128CbcMode    (3),
+                aes256CbcMode    (4)
+    }
+
+--=================================================================
+-- The MTA MIB module only supports a single Provisioning Server.
+--=================================================================
+
+pktcMtaNotification OBJECT IDENTIFIER ::= { pktcIetfMtaMib 0 }
+pktcMtaMibObjects  OBJECT IDENTIFIER ::= { pktcIetfMtaMib 1 }
+pktcMtaDevBase     OBJECT IDENTIFIER ::= { pktcMtaMibObjects 1 }
+pktcMtaDevServer   OBJECT IDENTIFIER ::= { pktcMtaMibObjects 2 }
+pktcMtaDevSecurity OBJECT IDENTIFIER ::= { pktcMtaMibObjects 3 }
+pktcMtaDevErrors   OBJECT IDENTIFIER ::= { pktcMtaMibObjects 4 }
+pktcMtaConformance  OBJECT IDENTIFIER ::= { pktcIetfMtaMib 2 }
+
+--
+-- The following pktcMtaDevBase group describes the base MTA objects
+--
+
+pktcMtaDevResetNow  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object controls the MTA software reset.
+          Reading this object always returns 'false'.  Setting this
+          object to 'true' causes the device to reset immediately
+          and the following actions to occur:
+             1.  All connections (if present) are flushed locally.
+             2.  All current actions such as ringing immediately
+                 terminate.
+             3.  Requests for signaling notifications, such as
+                 notification based on digit map recognition, are
+                 flushed.
+             4.  All endpoints are disabled.
+             5.  The provisioning flow is started at step MTA-1.
+          If a value is written into an instance of
+          pktcMtaDevResetNow, the agent MUST NOT retain the supplied
+          value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+    ::= { pktcMtaDevBase 1 }
+
+pktcMtaDevSerialNumber OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the manufacturer's serial
+          number of this MTA.  The value of this object MUST be
+          identical to the value specified in DHCP option 43,
+          sub-option 4.  The list of sub-options for DHCP option
+          43 are defined in the PacketCable MTA Device
+          Provisioning Specification."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+    ::= { pktcMtaDevBase 2 }
+
+pktcMtaDevSwCurrentVers OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object identifies the software version currently
+          operating in the MTA.
+          The MTA MUST return a string descriptive of the current
+          software load.  This object should use the syntax
+          defined by the individual vendor to identify the software
+          version.  The data presented in this object MUST be
+          identical to the software version information contained
+          in the 'sysDescr' MIB object of the MTA.  The value of
+          this object MUST be identical to the value specified in
+          DHCP option 43, sub-option 6.  The list of sub-options for
+          DHCP option 43 are defined in the PacketCable MTA Device
+          Provisioning Specification."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+::= { pktcMtaDevBase 3 }
+
+pktcMtaDevFQDN      OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Fully Qualified Domain Name for
+          this MTA.  The MTA FQDN is used to uniquely identify the
+          device to the PacketCable back office elements."
+    ::= { pktcMtaDevBase 4 }
+
+pktcMtaDevEndPntCount     OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the number of physical endpoints for
+          this MTA."
+    ::= { pktcMtaDevBase 5 }
+
+pktcMtaDevEnabled     OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+         " This object contains the MTA Admin Status of this device.
+           If this object is set to 'true', the MTA is
+           administratively enabled, and the MTA MUST be able to
+           interact with the PacketCable entities, such as CMS,
+           Provisioning Server, KDC, and other MTAs and MGs on all
+           PacketCable interfaces.
+           If this object is set to 'false', the MTA is
+           administratively disabled, and the MTA MUST perform the
+           following actions for all endpoints:
+               - Shut down all media sessions, if present.
+               - Shut down Network Control Signaling (NCS)
+               signaling by following the Restart in
+               Progress procedures in the PacketCable NCS
+               specification.
+           The MTA must execute all actions required to
+           enable or disable the telephony services for all
+           endpoints immediately upon receipt of an SNMP SET
+           operation.
+
+           Additionally, the MTA MUST maintain the SNMP Interface
+           for management and also the SNMP Key management interface.
+           Also, the MTA MUST NOT continue Kerberized key management
+           with CMSes until this object is set to 'true'.
+           Note: MTAs MUST renew the CMS Kerberos tickets according
+           to the PacketCable Security or IPCablecom Specification.
+           If a value is written into an instance of
+           pktcMtaDevEnabled, the agent MUST NOT retain the supplied
+           value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          PacketCable Security Specification;
+          PacketCable Network-Based Call Signaling Protocol
+
+          Specification."
+    ::= { pktcMtaDevBase 6 }
+
+pktcMtaDevTypeIdentifier     OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object provides the MTA device type identifier.  The
+          value of this object must be a copy of the DHCP option 60
+          value exchanged between the MTA and the DHCP server.  The
+          DHCP option 60 value contains an ASCII-encoded string
+          identifying capabilities of the MTA as defined in the
+          PacketCable MTA Device Provisioning Specification."
+    REFERENCE
+        " RFC 2132, DHCP Options and BOOTP Vendor Extensions;
+          PacketCable MTA Device Provisioning Specification."
+    ::= { pktcMtaDevBase 7 }
+
+pktcMtaDevProvisioningState     OBJECT-TYPE
+    SYNTAX      INTEGER {
+                pass                      (1),
+                inProgress                (2),
+                failConfigFileError       (3),
+                passWithWarnings          (4),
+                passWithIncompleteParsing (5),
+                failureInternalError      (6),
+                failureOtherReason        (7)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object indicates the completion state of the MTA
+          device provisioning process.
+
+          pass:
+          If the configuration file could be parsed successfully
+          and the MTA is able to reflect the same in its
+          MIB, the MTA MUST return the value 'pass'.
+
+          inProgress:
+          If the MTA is in the process of being provisioned,
+          the MTA MUST return the value 'inProgress'.
+
+          failConfigFileError:
+          If the configuration file was in error due to incorrect
+          values in the mandatory parameters, the MTA MUST reject
+          the configuration file, and the MTA MUST return the value
+
+          'failConfigFileError'.
+
+          passWithWarnings:
+          If the configuration file had proper values for all the
+          mandatory parameters but has errors in any of the optional
+          parameters (this includes any vendor-specific Object
+          Identifiers (OIDs) that are incorrect or not known
+          to the MTA), the MTA MUST return the value
+          'passWithWarnings'.
+
+          passWithIncompleteParsing:
+          If the configuration file is valid but the MTA cannot
+          reflect the same in its configuration (for example, too
+          many entries caused memory exhaustion), it must accept
+          the CMS configuration entries related, and the MTA MUST
+          return the value 'passWithIncompleteParsing'.
+
+          failureInternalError:
+          If the configuration file cannot be parsed due to an
+          Internal error, the MTA MUST return the value
+          'failureInternalError'.
+
+          failureOtherReason:
+          If the MTA cannot accept the configuration file for any
+          other reason than the ones stated above, the MTA MUST
+          return the value 'failureOtherReason'.
+
+          When a final SNMP INFORM is sent as part of Step 25 of the
+          MTA Provisioning process, this parameter is also included
+          in the final INFORM message."
+       REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+    ::= { pktcMtaDevBase 8 }
+
+pktcMtaDevHttpAccess  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object indicates whether the HTTP protocol is
+          supported for the MTA configuration file transfer."
+    ::= { pktcMtaDevBase 9 }
+
+pktcMtaDevProvisioningTimer  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..30)
+    UNITS       "minutes"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object defines the time interval for the provisioning
+          flow to complete.  The MTA MUST finish all provisioning
+          operations starting from the moment when an MTA receives
+          its DHCP ACK and ending at the moment when the MTA
+          downloads its configuration file (e.g., MTA5 to MTA23)
+          within the period of time set by this object.
+          Failure to comply with this condition constitutes
+          a provisioning flow failure.  If the object is set to 0,
+          the MTA MUST ignore the provisioning timer condition.
+          If a value is written into an instance of
+          pktcMtaDevProvisioningTimer, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+    DEFVAL {10}
+    ::=  {pktcMtaDevBase 10}
+
+pktcMtaDevProvisioningCounter  OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+            "This object counts the number of times the
+            provisioning cycle has looped through step MTA-1."
+      ::= {pktcMtaDevBase 11}
+
+ pktcMtaDevErrorOidsTable  OBJECT-TYPE
+    SYNTAX SEQUENCE OF PktcMtaDevErrorOidsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        " This table contains the list of configuration errors or
+          warnings the MTA encountered when parsing the
+          configuration file it received from the Provisioning
+          Server.
+          For each error, an entry is created in this table,
+          containing the configuration parameters the MTA rejected
+          and the associated reason (e.g., wrong or unknown OID,
+          inappropriate object values).  If the MTA
+          did not report a provisioning state of 'pass(1)' in
+          the pktcMtaDevProvisioningState object, this table MUST be
+          populated for each error or warning instance.  Even if
+          different parameters share the same error type (e.g., all
+          realm name configuration parameters are invalid), all
+          observed errors or warnings must be reported as
+          different instances.  Errors are placed into the table in
+          no particular order.  The table MUST be cleared each time
+
+          the MTA reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+    ::= {pktcMtaDevBase 12 }
+
+pktcMtaDevErrorOidsEntry  OBJECT-TYPE
+    SYNTAX PktcMtaDevErrorOidsEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        " This entry contains the necessary information the MTA MUST
+          attempt to provide in case of configuration file errors or
+          warnings."
+    INDEX { pktcMtaDevErrorOidIndex }
+             ::= {pktcMtaDevErrorOidsTable 1}
+
+PktcMtaDevErrorOidsEntry ::= SEQUENCE {
+    pktcMtaDevErrorOidIndex Unsigned32,
+    pktcMtaDevErrorOid      SnmpAdminString,
+    pktcMtaDevErrorValue    SnmpAdminString,
+    pktcMtaDevErrorReason   SnmpAdminString
+    }
+
+pktcMtaDevErrorOidIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This object is the index of the MTA configuration error
+          table.  It is an integer value that starts at value '1'
+          and is incremented for each encountered configuration
+          file error or warning.
+
+          The maximum number of errors or warnings that can be
+          recorded in the pktcMtaDevErrorOidsTable is set to 1024 as
+          a configuration file is usually validated by operators
+          before deployment.  Given the possible number of
+          configuration parameter assignments in the MTA
+          configuration file, 1024 is perceived as a sufficient
+          limit even with future extensions.
+
+          If the number of the errors in the configuration file
+          exceeds 1024, all errors beyond the 1024th one MUST
+          be ignored and not be reflected in the
+          pktcMtaDevErrorOidsTable."
+    ::= {pktcMtaDevErrorOidsEntry 1}
+
+pktcMtaDevErrorOid  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains a human readable representation
+          (character string) of the OID corresponding to the
+          configuration file parameter that caused the particular
+          error.
+          For example, if the value of the pktcMtaDevEnabled object
+          in the configuration file caused an error, then this
+          object instance will contain the human-readable string of
+          '1.3.6.1.2.1.140.1.1.6.0'.
+          If the MTA generated an error because it was not able
+          to recognize a particular OID, then this object
+          instance would contain an empty value (zero-length
+          string).
+          For example, if the value of an OID in the configuration
+          file was interpreted by the MTA as being 1.2.3.4.5, and if
+          the MTA was not able to recognize this OID as a valid one,
+          this object instance will contain a zero-length string.
+
+          If the number of errors in the configuration file exceeds
+          1024, then for all subsequent errors, the
+          pktcMtaDevErrorOid of the table's 1024th entry MUST
+          contain a human-readable representation of the
+          pktcMtaDevErrorsTooManyErrors object; i.e., the string
+          '1.3.6.1.2.1.140.1.1.4.1.0'.
+          Note that the syntax of this object is SnmpAdminString
+          instead of OBJECT IDENTIFIER because the object value may
+          not be a valid OID due to human or configuration tool
+          encoding errors."
+    ::= {pktcMtaDevErrorOidsEntry 2}
+
+pktcMtaDevErrorValue  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the value of the OID corresponding to
+          the configuration file parameter that caused the error.
+          If the MTA cannot recognize the OID of the
+          configuration parameter causing the error, then this
+          object instance contains the OID itself as interpreted
+          by the MTA in human-readable representation.
+          If the MTA can recognize the OID but generate an error due
+          to a wrong value of the parameter, then the object
+
+          instance contains the erroneous value of the parameter as
+          read from the configuration file.
+          In both cases, the value of this object must be
+          represented in human-readable form as a character string.
+          For example, if the value of the pktcMtaDevEnabled object
+          in the configuration file was 3 (invalid value), then the
+          pktcMtaDevErrorValue object instance will contain the
+          human-readable (string) representation of value '3'.
+          Similarly, if the OID in the configuration file has been
+          interpreted by the MTA as being 1.2.3.4.5 and the MTA
+          cannot recognize this OID as a valid one, then this
+          pktcMtaDevErrorValue object instance will contain human
+          readable (string) representation of value '1.2.3.4.5'.
+
+          If the number of errors in the configuration file exceeds
+          1024, then for all subsequent errors, the
+          pktcMtaDevErrorValue of the table's 1024th entry MUST
+          contain a human-readable representation of the
+          pktcMtaDevErrorsTooManyErrors object; i.e., the string
+          '1.3.6.1.2.1.140.1.1.4.1.0'."
+    ::= {pktcMtaDevErrorOidsEntry 3}
+
+pktcMtaDevErrorReason  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object indicates the reason for the error or warning,
+          as per the MTA's interpretation, in human-readable form.
+          For example:
+          'VALUE NOT IN RANGE', 'VALUE DOES NOT MATCH TYPE',
+          'UNSUPPORTED VALUE', 'LAST 4 BITS MUST BE SET TO ZERO',
+          'OUT OF MEMORY - CANNOT STORE'.
+          This object may also contain vendor specific errors for
+          private vendor OIDs and any proprietary error codes or
+          messages that can help diagnose configuration errors.
+
+          If the number of errors in the configuration file exceeds
+          1024, then for all subsequent errors, the
+          pktcMtaDevErrorReason of the table's 1024th entry MUST
+          contain a human-readable string indicating the reason
+          for an error; for example,
+          'Too many errors in the configuration file'."
+    ::= {pktcMtaDevErrorOidsEntry 4}
+
+--
+-- The following group describes server access and parameters used
+
+-- for the initial MTA provisioning and bootstrapping phases.
+--
+
+pktcMtaDevDhcpServerAddressType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Internet address type for the
+          PacketCable DHCP servers specified in MTA MIB."
+    DEFVAL { ipv4 }
+    ::= { pktcMtaDevServer 1}
+
+pktcMtaDevServerDhcp1   OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Internet Address of the primary
+          DHCP server the MTA uses during provisioning.
+          The type of this address is determined by the value of
+          the pktcMtaDevDhcpServerAddressType object.
+          When the latter has the value 'ipv4(1)', this object
+          contains the IP address of the primary DHCP
+          server.  It is provided by the CM to the MTA via the DHCP
+          option code 122, sub-option 1, as defined in RFC 3495.
+
+          The behavior of this object when the value of
+          pktcMtaDevDhcpServerAddressType is other than 'ipv4(1)'
+          is not presently specified, but it may be specified
+          in future versions of this MIB module.
+          If this object is of value
+          0.0.0.0, the MTA MUST stop all provisioning
+          attempts, as well as all other activities.
+          If this object is of value 255.255.255.255, it means
+          that there was no preference given for the primary
+          DHCP server, and, the MTA must follow the logic of
+          RFC2131, and the value of DHCP option 122,
+          sub-option 2, must be ignored."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 2131, Dynamic Host Configuration Protocol;
+          RFC 3495, DHCP Option for CableLabs Client Configuration."
+    ::= { pktcMtaDevServer 2 }
+
+pktcMtaDevServerDhcp2  OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Internet Address of the secondary
+          DHCP server the MTA uses during provisioning.
+          The type of this address is determined by the value of
+          the pktcMtaDevDhcpServerAddressType object.
+          When the latter has the value 'ipv4(1)', this object
+          contains the IP address of the secondary DHCP
+          server.  It is provided by the CM to the MTA via the DHCP
+          option code 122, sub-option 2, as defined in RFC 3495.
+
+          The behavior of this object when the value of
+          pktcMtaDevDhcpServerAddressType is other than 'ipv4(1)'
+          is not presently specified, but it may be specified
+          in future versions of this MIB module.
+          If there was no secondary DHCP server provided in DHCP
+          Option 122, sub-option 2, this object must return the value
+          0.0.0.0."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 3495, DHCP Option for CableLabs Client Configuration."
+          ::= { pktcMtaDevServer 3 }
+
+pktcMtaDevDnsServerAddressType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Internet address type for the
+          PacketCable DNS servers specified in MTA MIB."
+    DEFVAL { ipv4 }
+    ::= { pktcMtaDevServer 4}
+
+pktcMtaDevServerDns1  OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object contains the IP Address of the primary
+          DNS server to be used by the MTA.  The type of this address
+          is determined by the value of the
+          pktcMtaDevDnsServerAddressType object.
+          When the latter has the value 'ipv4(1)', this object
+          contains the IP address of the primary DNS server.
+          As defined in RFC 2132, PacketCable-compliant MTAs receive
+          the IP addresses of the DNS Servers in DHCP option 6.
+          The behavior of this object when the value of
+          pktcMtaDevDnsServerAddressType is other than 'ipv4(1)'
+
+          is not presently specified, but it may be specified
+          in future versions of this MIB module.
+          If a value is written into an instance of
+          pktcMtaDevServerDns1, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 2132, DHCP Options and BOOTP Vendor Extensions."
+    ::= { pktcMtaDevServer 5 }
+
+pktcMtaDevServerDns2  OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object contains the IP Address of the secondary
+          DNS server to be used by the MTA.  The type of this address
+          is determined by the value of the
+          pktcMtaDevDnsServerAddressType object.
+          When the latter has the value 'ipv4(1)', this object
+          contains the IP address of the secondary DNS
+          server.  As defined in RFC 2132, PacketCable-compliant MTAs
+          receive the IP addresses of the DNS Servers in DHCP
+          option 6.
+          The behavior of this object when the value of
+          pktcMtaDevDnsServerAddressType is other than 'ipv4(1)'
+          is not presently specified, but it may be specified
+          in future versions of this MIB module.
+          If a value is written into an instance of
+          pktcMtaDevServerDns2, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 2132, DHCP Options and BOOTP Vendor Extensions."
+    ::= { pktcMtaDevServer 6 }
+
+pktcMtaDevTimeServerAddressType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Internet address type for the
+          PacketCable Time servers specified in MTA MIB."
+    DEFVAL { ipv4 }
+    ::= { pktcMtaDevServer 7}
+
+pktcMtaDevTimeServer   OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Internet Address of the Time
+          Server used by an S-MTA for Time Synchronization.  The type
+          of this address is determined by the value of the
+          pktcMtaDevTimeServerAddressType object.
+          When the latter has the value 'ipv4(1)', this object
+          contains the IP address of the Time Server used for Time
+          Synchronization.
+          In the case of an S-MTA, this object must be
+          populated with a value other than 0.0.0.0 as obtained
+          from DHCP option 4.  The protocol by which the time of day
+          MUST be retrieved is defined in RFC 868.
+          In the case of an E-MTA, this object must contain a
+          value of 0.0.0.0 if the address type is 'ipv4(1)' since
+          an E-MTA does not use the Time Protocol for time
+          synchronization (an E-MTA uses the time retrieved by the
+          DOCSIS cable modem).
+          The behavior of this object when the value of
+          pktcMtaDevTimeServerAddressType is other than 'ipv4(1)'
+          is not presently specified, but it may be specified in
+          future versions of this MIB module.
+          If a value is written into an instance of
+          pktcMtaDevTimeServer, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " RFC 868, Time Protocol;
+          RFC 2131, Dynamic Host Configuration Protocol;
+          RFC 2132, DHCP Options and BOOTP Vendor Extensions."
+    ::= { pktcMtaDevServer 8}
+
+pktcMtaDevConfigFile  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the MTA device configuration file
+          information, including the access method, the server name,
+          and the configuration file name.  The value of this object
+          is the Uniform Resource Locator (URL) of the configuration
+          file for TFTP or HTTP download.
+          If this object value is a TFTP URL, it must be formatted
+          as defined in RFC 3617.
+          If this object value is an HTTP URL, it must be formatted
+          as defined in RFC 2616.
+          If the MTA SNMP Enrollment mechanism is used, then the MTA
+          must download the file provided by the Provisioning Server
+
+          during provisioning via an SNMP SET on this object.
+          If the MTA SNMP Enrollment mechanism is not used, this
+          object MUST contain the URL value corresponding to the
+          'siaddr' and 'file' fields received in the DHCP ACK to
+          locate the configuration file: the 'siaddr' and 'file'
+          fields represent the host and file of the TFTP URL,
+          respectively.  In this case, the MTA MUST return an
+          'inconsistentValue' error in response to SNMP SET
+          operations.
+          The MTA MUST return a zero-length string if the server
+          address (host part of the URL) is unknown.
+          If a value is written into an instance of
+          pktcMtaDevConfigFile, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 3617, URI Scheme for TFTP; RFC 2616, HTTP 1.1"
+    ::= { pktcMtaDevServer 9 }
+
+pktcMtaDevSnmpEntity  OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the FQDN of the SNMP entity of the
+          Provisioning Server.  When the MTA SNMP Enrollment
+          Mechanism is used, this object represents the server that
+          the MTA communicates with, that it receives the
+          configuration file URL from, and that it sends the
+          enrollment notification to.  The SNMP entity is also the
+          destination entity for all the provisioning
+          notifications.  It may be used for post-provisioning
+          SNMP operations.  During the provisioning phase, this
+          SNMP entity FQDN is supplied to the MTA via DHCP option
+          122, sub-option 3, as defined in RFC 3495.  The MTA must
+          resolve the FQDN value before its very first network
+          interaction with the SNMP entity during the provisioning
+          phase."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 3495, DHCP Option for CableLabs Client Configuration."
+    ::= { pktcMtaDevServer 10 }
+
+pktcMtaDevProvConfigHash  OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(20))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object contains the hash value of the contents of the
+          configuration file.
+          The authentication algorithm is Secure Hashing Algorithm
+          1 (SHA-1), and the length is 160 bits.  The hash
+          calculation MUST follow the requirements defined in the
+          PacketCable Security Specification.  When the MTA SNMP
+          Enrollment mechanism is used, this hash value is
+          calculated and sent to the MTA prior to sending the
+          config file.  This object value is then provided by the
+          Provisioning server via an SNMP SET operation.
+          When the MTA SNMP Enrollment mechanism is not in use, the
+          hash value is provided in the configuration file itself,
+          and it is also calculated by the MTA.  This object value
+          MUST represent the hash value calculated by the MTA.
+          When the MTA SNMP Enrollment mechanism is not in use, the
+          MTA must reject all SNMP SET operations on this object and
+          return an 'inconsistentValue' error.
+          If a value is written into an instance of
+          pktcMtaDevProvConfigHash, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          PacketCable Security Specification."
+    ::= { pktcMtaDevServer 11 }
+
+pktcMtaDevProvConfigKey  OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object contains the key used to encrypt/decrypt
+          the configuration file when secure SNMPv3 provisioning
+          is used.
+          The value of this object is provided along with the
+          configuration file information (pktcMtaDevConfigFile)
+          and hash (pktcMtaDevProvConfigHash) by the Provisioning
+          Server via SNMP SET once the configuration file has been
+          created, as defined by the PacketCable Security
+          specification.
+
+          The privacy algorithm is defined by the
+          pktcMtaDevProvConfigEncryptAlg MIB object.  The
+          MTA requirements related to the privacy algorithm are
+          defined in the PacketCable Security Specification.
+
+          If this object is set at any other provisioning step than
+          that allowed by the PacketCable MTA Device
+
+          Provisioning Specification, the MTA SHOULD return
+          an 'inconsistentValue' error.
+          This object must not be used in non secure provisioning
+          mode.  In non-secure provisioning modes, the MTA SHOULD
+          return an 'inconsistentValue' in response to SNMP SET
+          operations, and the MTA SHOULD return a zero-length
+          string in response to SNMP GET operations.
+          If a value is written into an instance of
+          pktcMtaDevProvConfigKey, the agent MUST NOT retain the
+          supplied value across MTA re-initializations or reboots."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          PacketCable Security Specification."
+    ::= { pktcMtaDevServer 12 }
+
+pktcMtaDevProvConfigEncryptAlg   OBJECT-TYPE
+    SYNTAX      PktcMtaDevProvEncryptAlg
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object defines the encryption algorithm used for
+          privacy protection of the MTA Configuration File content."
+    DEFVAL { des64CbcMode }
+    ::= { pktcMtaDevServer 13 }
+
+pktcMtaDevProvSolicitedKeyTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..180)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object defines a Kerberos Key Management timer on the
+          MTA.  It is the time period during which the MTA saves the
+          nonce and Server Kerberos Principal Identifier to match an
+          AP Request and its associated AP Reply response from the
+          Provisioning Server.
+          After the timeout has been exceeded, the client discards
+          this (nonce, Server Kerberos Principal Identifier) pair,
+          after which it will no longer accept a matching AP Reply.
+          This timer only applies when the Provisioning Server
+          initiated key management for SNMPv3 (with a
+          Wake Up message).
+          If this object is set to a zero value, the MTA MUST return
+          an 'inconsistentValue' in response to SNMP SET operations.
+          This object should not be used in non-secure provisioning
+          modes.  In non-secure provisioning modes, the MTA MUST
+          return an 'inconsistentValue' in response to SNMP SET
+          operations, and the MTA MUST return a zero value in
+
+          response to SNMP GET operations.
+          If a value is written into an instance of
+          pktcMtaDevProvSolicitedKeyTimeout, the agent MUST NOT
+          retain the supplied value across MTA re-initializations
+          or reboots."
+    DEFVAL { 3 }
+    ::= { pktcMtaDevServer 14 }
+
+--=================================================================
+--
+--  Unsolicited key updates are retransmitted according to an
+--  exponential back-off mechanism using two timers and a maximum
+--  retry counter for AS replies.
+--  The initial retransmission timer value is the nominal timer
+--  value (pktcMtaDevProvUnsolicitedKeyNomTimeout).  The
+--  retransmissions occur with an exponentially increasing interval
+--  that caps at the maximum timeout value
+--  (pktcMtaDevProvUnsolicitedKeyMaxTimeout).
+--  Retransmissions stop when the maximum retry counter is reached
+--  (pktcMtaDevProvUnsolicitedKeyMaxRetries).
+--  For example, with values of 3 seconds for the nominal
+--  timer, 100 seconds for the maximum timeout, and 8 retries max,
+--  and with an exponential value of 2, this results in
+--  retransmission intervals will be 3 s, 6 s, 12 s, 24 s, 48 s,
+--  96 s, 100 s, and 100 s;
+--  retransmissions then stop because the maximum number of
+--  retries (8) has been reached.
+--
+--=================================================================
+--
+--  Timeouts for unsolicited key management updates are only
+--  pertinent before the first SNMPv3 message is sent between the
+--  MTA and the Provisioning Server and before the configuration
+--  file is loaded.
+--
+--=================================================================
+
+pktcMtaDevProvUnsolicitedKeyMaxTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object defines the timeout value that applies to
+          an MTA-initiated AP-REQ/REP key management exchange with
+          the Provisioning Server in SNMPv3 provisioning.
+          It is the maximum timeout value, and it may not be exceeded
+          in the exponential back-off algorithm.  If the DHCP option
+
+          code 122, sub-option 5, is provided to the MTA, it
+          overwrites this value.
+          In non-secure provisioning modes, the MTA MUST
+          return a zero value in response to SNMP GET
+          operations."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL {600}
+    ::= { pktcMtaDevServer 15 }
+
+pktcMtaDevProvUnsolicitedKeyNomTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object defines the starting value of the timeout
+          for the AP-REQ/REP Backoff and Retry mechanism
+          with exponential timeout in SNMPv3 provisioning.
+          If the DHCP option code 122, sub-option 5, is provided
+          the MTA, it overwrites this value.
+          In non-secure provisioning modes, the MTA MUST
+          return a zero value in response to SNMP GET
+          operations."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL {3}
+    ::= { pktcMtaDevServer 16}
+
+pktcMtaDevProvUnsolicitedKeyMaxRetries  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..32)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains a retry counter that applies to
+          an MTA-initiated AP-REQ/REP key management exchange with
+          the Provisioning Server in secure SNMPv3 provisioning.
+          It is the maximum number of retries before the MTA stops
+          attempting to establish a Security Association with
+          Provisioning Server.
+          If the DHCP option code 122, sub-option 5, is provided to
+          the MTA, it overwrites this value.
+          If this object is set to a zero value, the MTA MUST return
+          an 'inconsistentValue' in response to SNMP SET operations.
+          In non-secure provisioning modes, the MTA MUST
+          return a zero value in response to SNMP GET
+          operations."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL {8}
+    ::= { pktcMtaDevServer 17 }
+
+pktcMtaDevProvKerbRealmName  OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the name of the associated
+          provisioning Kerberos realm acquired during the MTA4
+          provisioning step (DHCP Ack) for SNMPv3 provisioning.
+          The uppercase ASCII representation of the associated
+          Kerberos realm name MUST be used by both the Manager (SNMP
+          entity) and the MTA.
+          The Kerberos realm name for the Provisioning Server is
+          supplied to the MTA via DHCP option code 122, sub-option 6,
+          as defined in RFC 3495.  In secure SNMP provisioning mode,
+          the value of the Kerberos realm name for the Provisioning
+          Server supplied in the MTA configuration file must match
+          the value supplied in the DHCP option code 122,
+          sub-option 6.  Otherwise, the value of this object must
+          contain the value supplied in DHCP Option 122,
+          sub-option 6."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          RFC 3495, DHCP Option for CableLabs Client Configuration."
+    ::= { pktcMtaDevServer 18 }
+
+pktcMtaDevProvState  OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                operational                (1),
+                waitingForSnmpSetInfo      (2),
+                waitingForTftpAddrResponse (3),
+                waitingForConfigFile       (4)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object defines the MTA provisioning state.
+          If the state is:
+
+            'operational(1)', the device has completed the loading
+             and processing of the initialization parameters.
+
+            'waitingForSnmpSetInfo(2)', the device is waiting on
+             its configuration file download access information.
+             Note that this state is only reported when the MTA
+
+             SNMP enrollment mechanism is used.
+
+            'waitingForTftpAddrResponse(3)', the device has sent a
+             DNS request to resolve the server providing the
+             configuration file, and it is awaiting for a response.
+             Note that this state is only reported when the MTA
+             SNMP enrollment mechanism is used.
+
+            'waitingForConfigFile(4)', the device has sent a
+            request via TFTP or HTTP for the download of its
+            configuration file, and it is awaiting for a response or
+            the file download is in progress."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification,
+          PacketCable Security Specification."
+    ::= { pktcMtaDevServer 19 }
+
+    --
+    -- The following object group describes the security objects.
+    --
+
+pktcMtaDevManufacturerCertificate  OBJECT-TYPE
+    SYNTAX      DocsX509ASN1DEREncodedCertificate
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the MTA Manufacturer Certificate.
+          The object value must be the ASN.1 DER encoding of the MTA
+          manufacturer's X.509 public key certificate.  The MTA
+          Manufacturer Certificate is issued to each MTA
+          manufacturer and is installed into each MTA at the time of
+          manufacture or with a secure code download.  The specific
+          requirements related to this certificate are defined in
+          the PacketCable or IPCablecom Security specifications."
+    REFERENCE
+        " PacketCable Security Specification."
+    ::= {pktcMtaDevSecurity 1}
+
+pktcMtaDevCertificate  OBJECT-TYPE
+    SYNTAX      DocsX509ASN1DEREncodedCertificate
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the MTA Device Certificate.
+          The object value must be the ASN.1 DER encoding of the
+          MTA's X.509 public-key certificate issued by the
+          manufacturer and installed into the MTA at the time of
+
+          manufacture or with a secure code download.
+          This certificate contains the MTA MAC address.  The
+          specific requirements related to this certificate are
+          defined in the PacketCable or IPCablecom Security
+          specifications."
+    REFERENCE
+        " PacketCable Security Specification."
+    ::= { pktcMtaDevSecurity 2 }
+
+pktcMtaDevCorrelationId  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains a correlation ID, an arbitrary value
+          generated by the MTA that will be exchanged as part of the
+          device capability data to the Provisioning Application.
+          This random value is used as an identifier to correlate
+          related events in the MTA provisioning sequence.
+          This value is intended for use only during the MTA
+          initialization and configuration file download."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification."
+    ::= { pktcMtaDevSecurity 3 }
+
+pktcMtaDevTelephonyRootCertificate  OBJECT-TYPE
+    SYNTAX      DocsX509ASN1DEREncodedCertificate
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the telephony Service Provider Root
+          certificate.  The object value is the ASN.1 DER encoding of
+          the IP Telephony Service Provider Root X.509 public key
+          certificate.  This certification is stored in the MTA
+          non-volatile memory and can be updated with a secure code
+          download.  This certificate is used to validate the initial
+          AS Reply received by the MTA from the Key Distribution
+          Center (KDC) during the MTA initialization.  The specific
+          requirements related to this certificate are defined in
+          the PacketCable or IPCablecom Security specifications."
+    REFERENCE
+        " PacketCable Security Specification."
+    ::= { pktcMtaDevSecurity 4 }
+
+--=================================================================
+--
+--   Informative Procedures for Setting up Security Associations
+--
+
+--   A Security Association may be set up either via configuration or
+--   via NCS signaling.
+--
+--   I.   Security association setup via configuration.
+--
+--   The realm must be configured first.  Associated with the realm
+--   is a KDC.  The realm table (pktcMtaDevRealmTable) indicates
+--   information about the realm (e.g., name, organization name) and
+--   parameters associated with KDC communications (e.g., grace
+--   periods, AS Request/AS Reply adaptive back-off parameters).
+--
+--   Once the realm is established, one or more CMS(es) may be
+--   defined in the realm.  Associated with each CMS
+--   entry in the pktcMtaDevCmsTable is an explicit reference
+--   to a Realm via the realm name (pktcMtaDevCmsKerbRealmName),
+--   the FQDN of the CMS, and parameters associated with IPSec
+--   key management with the CMS (e.g., clock skew, AP Request/
+--   AP Reply adaptive back-off parameters).
+--
+--   II.  Security association setup via NCS signaling.
+--
+--   The procedure of establishing the Security Associations
+--   for NCS signaling is described in the PacketCable Security
+--   specification.
+--   It involves the analysis of the pktcNcsEndPntConfigTable row
+--   for the corresponding endpoint number and the correlation of
+--   the CMS FQDN from this row with the CMS Table and
+--   consequently, with the Realm Table.  Both of these tables
+--   are defined below.  The pktcNcsEndPntConfigTable is defined in
+--   the IP over Cable Data Network (IPCDN)
+--   NCS Signaling MIB [NCSSIGMIB].
+--
+--   III.  When the MTA receives wake-up or re-key messages from a
+--   CMS, it performs key management based on the corresponding
+--   entry in the CMS table.  If the matching CMS entry does not
+--   exist, it must ignore the wake-up or re-key messages.
+--
+--=================================================================
+--=================================================================
+--
+--   pktcMtaDevRealmTable
+--
+--   The pktcMtaDevRealmTable shows the KDC realms.  The table is
+--   indexed with pktcMtaDevRealmIndex.  The Realm Table contains the
+--   pktcMtaDevRealmName in conjunction with any server that needs
+--   a Security Association with the MTA.  Uppercase must be used
+--   to compare the pktcMtaDevRealmName content.
+--
+
+--=================================================================
+
+pktcMtaDevRealmAvailSlot   OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..64)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the index number of the first
+          available entry in the realm table (pktcMtaDevRealmTable).
+          If all the entries in the realm table have been assigned,
+          this object contains the value of zero.
+          A management station should create new entries in the
+          realm table, using the following procedure:
+
+          First, issue a management protocol retrieval operation
+          to determine the value of the first available index in the
+          realm table (pktcMtaDevRealmAvailSlot).
+
+          Second, issue a management protocol SET operation
+          to create an instance of the pktcMtaDevRealmStatus
+          object by setting its value to 'createAndWait(5)'.
+
+          Third, if the SET operation succeeded, continue
+          modifying the object instances corresponding to the newly
+          created conceptual row, without fear of collision with
+          other management stations.  When all necessary conceptual
+          columns of the row are properly populated (via SET
+          operations or default values), the management station may
+          SET the pktcMtaDevRealmStatus object to 'active(1)'."
+    ::= {  pktcMtaDevSecurity 5 }
+
+pktcMtaDevRealmTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PktcMtaDevRealmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This object contains the realm table.
+          The CMS table (pktcMtaDevCmsTable) and the realm table
+          (pktcMtaDevRealmTable) are used for managing the MTA-CMS
+          Security Associations.  The realm table defines the
+          Kerberos realms for the Application Servers (CMSes and the
+          Provisioning Server)."
+    ::= {  pktcMtaDevSecurity 6 }
+
+pktcMtaDevRealmEntry  OBJECT-TYPE
+    SYNTAX      PktcMtaDevRealmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This table entry object lists the MTA security parameters
+          for a single Kerberos realm.  The conceptual rows MUST NOT
+          persist across MTA reboots."
+    INDEX { pktcMtaDevRealmIndex }
+::= { pktcMtaDevRealmTable 1 }
+
+PktcMtaDevRealmEntry ::= SEQUENCE {
+    pktcMtaDevRealmIndex                    Unsigned32,
+    pktcMtaDevRealmName                     SnmpAdminString,
+    pktcMtaDevRealmPkinitGracePeriod        Unsigned32,
+    pktcMtaDevRealmTgsGracePeriod           Unsigned32,
+    pktcMtaDevRealmOrgName                  LongUtf8String,
+    pktcMtaDevRealmUnsolicitedKeyMaxTimeout Unsigned32,
+    pktcMtaDevRealmUnsolicitedKeyNomTimeout Unsigned32,
+    pktcMtaDevRealmUnsolicitedKeyMaxRetries Unsigned32,
+    pktcMtaDevRealmStatus                   RowStatus
+    }
+
+pktcMtaDevRealmIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..64)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This object defines the realm table index."
+    ::= { pktcMtaDevRealmEntry 1}
+
+pktcMtaDevRealmName  OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object identifies the Kerberos realm name in all
+          capitals.  The MTA MUST prohibit the instantiation of any
+          two rows with identical Kerberos realm names.  The MTA MUST
+          also verify that any search operation involving Kerberos
+          realm names is done using the uppercase ASCII
+          representation of the characters."
+    ::= { pktcMtaDevRealmEntry 2 }
+
+pktcMtaDevRealmPkinitGracePeriod  OBJECT-TYPE
+    SYNTAX      Unsigned32 (15..600)
+    UNITS       "minutes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the PKINIT Grace Period.  For the
+         purpose of key management with Application Servers (CMSes
+
+         or the Provisioning Server), the MTA must utilize the
+         PKINIT exchange to obtain Application Server tickets.  The
+         MTA may utilize the PKINIT exchange to obtain Ticket
+         Granting Tickets (TGTs), which are then used to obtain
+         Application Server tickets in a TGS exchange.
+         The PKINIT exchange occurs according to the current Ticket
+         Expiration Time (TicketEXP) and on the PKINIT Grace Period
+         (PKINITGP).  The MTA MUST initiate the PKINIT exchange at
+         the time: TicketEXP - PKINITGP."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 15 }
+    ::= { pktcMtaDevRealmEntry 3 }
+
+pktcMtaDevRealmTgsGracePeriod  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..600)
+    UNITS       "minutes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Ticket Granting Server Grace
+          Period (TGSGP).  The Ticket Granting Server (TGS)
+          Request/Reply exchange may be performed by the MTA
+          on demand whenever an Application Server ticket is
+          needed to establish security parameters.  If the MTA
+          possesses a ticket that corresponds to the Provisioning
+          Server or a CMS that currently exists in the CMS table,
+          the MTA MUST initiate the TGS Request/Reply exchange
+          at the time: TicketEXP - TGSGP."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 10 }
+    ::= { pktcMtaDevRealmEntry 4 }
+
+pktcMtaDevRealmOrgName  OBJECT-TYPE
+    SYNTAX      LongUtf8String
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the X.500 organization name attribute
+          as defined in the subject name of the service provider
+          certificate."
+    REFERENCE
+        " PacketCable Security Specification;
+          RFCs 3280 and 4630, Internet X.509 Public Key
+          Infrastructure Certificate and Certificate Revocation List
+          (CRL) Profile"
+    ::= { pktcMtaDevRealmEntry 5 }
+
+pktcMtaDevRealmUnsolicitedKeyMaxTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the maximum time the MTA will
+          attempt to perform the exponential back-off algorithm.
+          This timer only applies when the MTA initiated key
+          management.  If the DHCP option code 122, sub-option 4, is
+          provided to the MTA, it overwrites this value.
+
+          Unsolicited key updates are retransmitted according to an
+          exponential back-off mechanism using two timers and a
+          maximum retry counter for AS replies.
+          The initial retransmission timer value is the nominal
+          timer value (pktcMtaDevRealmUnsolicitedKeyNomTimeout).  The
+          retransmissions occur with an exponentially increasing
+          interval that caps at the maximum timeout value
+          (pktcMtaDevRealmUnsolicitedKeyMaxTimeout).
+          Retransmissions stop when the maximum retry counter is
+          reached (pktcMatDevRealmUnsolicitedMaxRetries).
+
+          For example, with values of 3 seconds for the nominal
+          timer, 20 seconds for the maximum timeout, and 5 retries
+          max, retransmission intervals will be 3 s, 6 s,
+          12 s, 20 s, and 20 s, and retransmissions then stop because
+          the maximum number of retries has been reached."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 100 }
+    ::= { pktcMtaDevRealmEntry 6 }
+
+pktcMtaDevRealmUnsolicitedKeyNomTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..600000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the initial timeout value
+          for the AS-REQ/AS-REP exponential back-off and retry
+          mechanism.  If the DHCP option code 122, sub-option 4, is
+          provided to the MTA, it overwrites this value.
+          This value should account for the average roundtrip
+          time between the MTA and the KDC, as well as the
+          processing delay on the KDC.
+
+          Unsolicited key updates are retransmitted according to an
+          exponential back-off mechanism using two timers and a
+          maximum retry counter for AS replies.
+          The initial retransmission timer value is the nominal
+          timer value (pktcMtaDevRealmUnsolicitedKeyNomTimeout).  The
+          retransmissions occur with an exponentially increasing
+          interval that caps at the maximum timeout value
+          (pktcMtaDevRealmUnsolicitedKeyMaxTimeout).
+          Retransmissions stop when the maximum retry counter is
+          reached (pktcMatDevRealmUnsolicitedMaxRetries).
+
+          For example, with values of 3 seconds for the nominal
+          timer, 20 seconds for the maximum timeout, and 5 retries
+          max, in retransmission intervals will be 3 s, 6 s,
+          12 s, 20 s, and 20 s; retransmissions then stop because
+          the maximum number of retries has been reached."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 3000 }
+    ::= { pktcMtaDevRealmEntry 7 }
+
+pktcMtaDevRealmUnsolicitedKeyMaxRetries  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the maximum number of retries the
+          MTA attempts to obtain a ticket from the KDC.
+
+          Unsolicited key updates are retransmitted according to an
+          exponential back-off mechanism using two timers and a
+          maximum retry counter for AS replies.
+          The initial retransmission timer value is the nominal
+          timer value (pktcMtaDevRealmUnsolicitedKeyNomTimeout).  The
+          retransmissions occur with an exponentially increasing
+          interval that caps at the maximum timeout value
+          (pktcMtaDevRealmUnsolicitedKeyMaxTimeout).
+          Retransmissions stop when the maximum retry counter is
+          reached (pktcMatDevRealmUnsolicitedMaxRetries).
+
+          For example, with values of 3 seconds for the nominal
+          timer, 20 seconds for the maximum timeout, and 5 retries
+          max, retransmission intervals will be 3 s, 6 s,
+          12 s, 20 s, and 20 s; retransmissions then stop because
+          the maximum number of retries has been reached."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 5 }
+    ::= { pktcMtaDevRealmEntry 8 }
+
+pktcMtaDevRealmStatus     OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object defines the row status of this realm in the
+          realm table (pktcMtaDevRealmTable).
+
+          An entry in this table is not qualified for activation
+          until the object instances of all corresponding columns
+          have been initialized, either by default values, or via
+          explicit SET operations.  Until all object instances in
+          this row are initialized, the status value for this realm
+          must be 'notReady(3)'.
+          In particular, two columnar objects must be explicitly
+          SET: the realm name (pktcMtaDevRealmName) and the
+          organization name (pktcMtaDevRealmOrgName).  Once these 2
+          objects have been set and the row status is SET to
+          'active(1)', the MTA MUST NOT allow any modification of
+          these 2 object values.
+          The value of this object has no effect on whether other
+          columnar objects in this row can be modified."
+    ::= { pktcMtaDevRealmEntry 9 }
+
+--=================================================================
+--
+--  The CMS table, pktcMtaDevCmsTable
+--
+-- The CMS table and the realm table (pktcMtaDevRealmTable) are used
+-- for managing the MTA signaling security.  The CMS table defines
+-- the CMSes the MTA is allowed to communicate with and contains
+-- the parameters describing the SA establishment between the MTA
+-- and a CMS.
+-- The CMS table is indexed by pktcMtaDevCmsIndex.  The table
+-- contains the CMS FQDN (pktcMtaDevCmsFQDN) and the associated
+-- Kerberos realm name (pktcMtaDevCmsKerbRealmName) so that the MTA
+-- can find the corresponding Kerberos realm name in the
+-- pktcMtaDevRealmTable.
+--
+--=================================================================
+
+pktcMtaDevCmsAvailSlot   OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..128)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the index number of the first
+          available entry in the CMS table (pktcMtaDevCmsTable).
+          If all the entries in the CMS table have been assigned,
+          this object contains the value of zero.
+          A management station should create new entries in the
+          CMS table, using the following procedure:
+
+          First, issue a management protocol retrieval operation
+          to determine the value of the first available index in the
+          CMS table (pktcMtaDevCmsAvailSlot).
+
+          Second, issue a management protocol SET operation
+          to create an instance of the pktcMtaDevCmsStatus
+          object by setting its value to 'createAndWait(5)'.
+
+          Third, if the SET operation succeeded, continue
+          modifying the object instances corresponding to the newly
+          created conceptual row, without fear of collision with
+          other management stations.  When all necessary conceptual
+          columns of the row are properly populated (via SET
+          operations or default values), the management station may
+          SET the pktcMtaDevCmsStatus object to 'active(1)'."
+    ::= {  pktcMtaDevSecurity 7 }
+
+pktcMtaDevCmsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PktcMtaDevCmsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This object defines the CMS table.
+          The CMS table (pktcMtaDevCmsTable) and the realm table
+          (pktcMtaDevRealmTable) are used for managing security
+          between the MTA and CMSes.  Each CMS table entry defines
+          a CMS the managed MTA is allowed to communicate with
+          and contains security parameters for key management with
+          that CMS."
+    ::= {  pktcMtaDevSecurity 8 }
+
+pktcMtaDevCmsEntry  OBJECT-TYPE
+    SYNTAX      PktcMtaDevCmsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This table entry object lists the MTA key management
+          parameters used when establishing Security Associations
+          with a CMS.  The conceptual rows MUST NOT persist across
+          MTA reboots."
+    INDEX { pktcMtaDevCmsIndex }
+    ::= { pktcMtaDevCmsTable 1 }
+
+PktcMtaDevCmsEntry ::= SEQUENCE {
+    pktcMtaDevCmsIndex                        Unsigned32,
+    pktcMtaDevCmsFqdn                         SnmpAdminString,
+    pktcMtaDevCmsKerbRealmName                SnmpAdminString,
+    pktcMtaDevCmsMaxClockSkew                 Unsigned32,
+    pktcMtaDevCmsSolicitedKeyTimeout          Unsigned32,
+    pktcMtaDevCmsUnsolicitedKeyMaxTimeout     Unsigned32,
+    pktcMtaDevCmsUnsolicitedKeyNomTimeout     Unsigned32,
+    pktcMtaDevCmsUnsolicitedKeyMaxRetries     Unsigned32,
+    pktcMtaDevCmsIpsecCtrl                    TruthValue,
+    pktcMtaDevCmsStatus                       RowStatus
+    }
+
+pktcMtaDevCmsIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..128)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " This object defines the CMS table index."
+    ::= { pktcMtaDevCmsEntry 1 }
+
+pktcMtaDevCmsFqdn  OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the CMS FQDN.  The MTA must
+          prohibit the instantiation of any two rows with identical
+          FQDNs.  The MTA must also verify that any search and/or
+          comparison operation involving a CMS FQDN is case
+          insensitive.  The MTA must resolve the CMS FQDN as required
+           by the corresponding PacketCable Specifications."
+    REFERENCE
+        " PacketCable MTA Device Provisioning Specification;
+          PacketCable Security Specification;
+          PacketCable Network-Based Call Signaling Protocol
+          Specification."
+    ::= { pktcMtaDevCmsEntry 2 }
+
+pktcMtaDevCmsKerbRealmName  OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object identifies the Kerberos realm name in uppercase
+          characters associated with the CMS defined in this
+
+          conceptual row.  The object value is a reference
+          point to the corresponding Kerberos realm name in the
+          realm table (pktcMtaDevRealmTable)."
+    ::= { pktcMtaDevCmsEntry 3 }
+
+pktcMtaDevCmsMaxClockSkew    OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1800)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object specifies the maximum allowable clock skew
+          between the MTA and the CMS defined in this row."
+    DEFVAL { 300 }
+    ::= { pktcMtaDevCmsEntry 4 }
+
+pktcMtaDevCmsSolicitedKeyTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..30000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object defines a Kerberos Key Management timer on the
+          MTA.  It is the time period during which the MTA saves the
+          nonce and Server Kerberos Principal Identifier to match an
+          AP Request and its associated AP Reply response from the
+          CMS.  This timer only applies when the CMS initiated key
+          management (with a Wake Up message or a Rekey message)."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 1000 }
+    ::= { pktcMtaDevCmsEntry 5 }
+
+--=================================================================
+--
+--  Unsolicited key updates are retransmitted according to an
+--  exponential back-off mechanism using two timers and a maximum
+--  retry counter for AS replies.
+--  The initial retransmission timer value is the nominal timer
+--  value (pktcMtaDevCmsUnsolicitedKeyNomTimeout).  The
+--  retransmissions occur with an exponentially increasing interval
+--  that caps at the maximum timeout value
+--  (pktcMtaDevCmsUnsolicitedKeyMaxTimeout).
+--  Retransmissions stop when the maximum retry counter is reached
+--  (pktcMatDevCmsUnsolicitedMaxRetries).
+--  For example, with values of 3 seconds for the nominal
+--  timer, 20 seconds for the maximum timeout, and 5 retries max,
+--  retransmission intervals will be 3 s, 6 s, 12 s,
+--  20 s, and 20 s; retransmissions then stop due to the
+--  maximum number of retries reached.
+--
+--=================================================================
+
+pktcMtaDevCmsUnsolicitedKeyMaxTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object defines the timeout value that only applies
+          to an MTA-initiated key management exchange.  It is the
+          maximum timeout, and it may not be exceeded in the
+          exponential back-off algorithm."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 600 }
+    ::= { pktcMtaDevCmsEntry 6 }
+
+pktcMtaDevCmsUnsolicitedKeyNomTimeout  OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..30000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object defines the starting value of the timeout
+          for an MTA-initiated key management.  It should account for
+          the average roundtrip time between the MTA and the CMS and
+          the processing time on the CMS."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 500 }
+    ::= { pktcMtaDevCmsEntry 7 }
+
+pktcMtaDevCmsUnsolicitedKeyMaxRetries  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the maximum number of retries before
+          the MTA stops attempting to establish a Security
+          Association with the CMS."
+    REFERENCE
+        " PacketCable Security Specification."
+    DEFVAL { 5 }
+    ::= { pktcMtaDevCmsEntry 8 }
+
+pktcMtaDevCmsIpsecCtrl     OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        " This object specifies the MTA IPSec control flag.
+          If the object value is 'true', the MTA must use Kerberos
+          Key Management and IPsec to communicate with this CMS.  If
+          it is 'false', IPSec Signaling Security and Kerberos key
+          management are disabled for this specific CMS."
+    DEFVAL { true }
+    ::= { pktcMtaDevCmsEntry 9 }
+
+pktcMtaDevCmsStatus     OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object defines the row status associated with this
+          particular CMS in the CMS table (pktcMtaDevCmsTable).
+
+          An entry in this table is not qualified for activation
+          until the object instances of all corresponding columns
+          have been initialized, either by default values or via
+          explicit SET operations.  Until all object instances in
+          this row are initialized, the status value for this realm
+          must be 'notReady(3)'.
+          In particular, two columnar objects must be SET: the
+          CMS FQDN (pktcMtaDevCmsFqdn) and the Kerberos realm name
+          (pktcMtaDevCmsKerbRealmName).  Once these 2 objects have
+          been set and the row status is SET to 'active(1)', the MTA
+          MUST NOT allow any modification of these 2 object values.
+
+          The value of this object has no effect on
+          whether other columnar objects in this row can be
+          modified."
+    ::= { pktcMtaDevCmsEntry 10 }
+
+pktcMtaDevResetKrbTickets   OBJECT-TYPE
+    SYNTAX      BITS {
+                         invalidateProvOnReboot   (0),
+                         invalidateAllCmsOnReboot (1)
+                }
+    MAX-ACCESS   read-write
+    STATUS    current
+    DESCRIPTION
+        " This object defines a Kerberos Ticket Control Mask that
+          instructs the MTA to invalidate the specific Application
+
+          Server Kerberos ticket(s) that are stored locally in the
+          MTA NVRAM (non-volatile or persistent memory).
+          If the MTA does not store Kerberos tickets in NVRAM, it
+          MUST ignore setting of this object and MUST report a BITS
+          value of zero when the object is read.
+          If the MTA supports Kerberos tickets storage in NVRAM, the
+          object value is encoded as follows:
+          - Setting the invalidateProvOnReboot bit (bit 0) to 1
+            means that the MTA MUST invalidate the Kerberos
+            Application Ticket(s) for the Provisioning Application
+            at the next MTA reboot if secure SNMP provisioning mode
+            is used.  In non-secure provisioning modes, the MTA MUST
+            return an 'inconsistentValue' in response to SNMP SET
+            operations with a bit 0 set to 1.
+          - Setting the invalidateAllCmsOnReboot bit (bit 1) to 1
+            means that the MTA MUST invalidate the Kerberos
+            Application Ticket(s) for all CMSes currently assigned
+            to the MTA endpoints.
+          If a value is written into an instance of
+          pktcMtaDevResetKrbTickets, the agent MUST retain the
+          supplied value across an MTA re-initialization or
+          reboot."
+    REFERENCE
+        "PacketCable Security Specification."
+    DEFVAL { {   } }
+    ::= {  pktcMtaDevSecurity 9 }
+
+--
+-- The following group, pktcMtaDevErrors, defines an OID
+-- corresponding to error conditions encountered during the MTA
+-- provisioning.
+--
+
+pktcMtaDevErrorsTooManyErrors OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+        "This object defines the OID corresponding to the error
+         condition when too many errors are encountered in the
+         MTA configuration file during provisioning."
+       ::= { pktcMtaDevErrors  1 }
+
+pktcMtaDevProvisioningEnrollment  NOTIFICATION-TYPE
+    OBJECTS {
+            sysDescr,
+            pktcMtaDevSwCurrentVers,
+            pktcMtaDevTypeIdentifier,
+            ifPhysAddress,
+            pktcMtaDevCorrelationId
+
+    }
+    STATUS   current
+    DESCRIPTION
+        " This INFORM notification is issued by the MTA to initiate
+          the PacketCable provisioning process when the MTA SNMP
+          enrollment mechanism is used.
+          It contains the system description, the current software
+          version, the MTA device type identifier, the MTA MAC
+          address (obtained in the MTA ifTable in the ifPhysAddress
+          object that corresponds to the ifIndex 1), and a
+          correlation ID."
+    ::= { pktcMtaNotification 1 }
+
+pktcMtaDevProvisioningStatus  NOTIFICATION-TYPE
+    OBJECTS {
+            ifPhysAddress,
+            pktcMtaDevCorrelationId,
+            pktcMtaDevProvisioningState
+    }
+    STATUS      current
+    DESCRIPTION
+        " This INFORM notification may be issued by the MTA to
+          confirm the completion of the PacketCable provisioning
+          process, and to report its provisioning completion
+          status.
+          It contains the MTA MAC address (obtained in the MTA
+          ifTable in the ifPhysAddress object that corresponds
+          to the ifIndex 1), a correlation ID and the MTA
+          provisioning state as defined in
+          pktcMtaDevProvisioningState."
+    ::= { pktcMtaNotification 2 }
+
+--
+-- Compliance Statements
+--
+
+pktcMtaCompliances  OBJECT IDENTIFIER ::= { pktcMtaConformance 1 }
+pktcMtaGroups       OBJECT IDENTIFIER ::= { pktcMtaConformance 2 }
+
+pktcMtaBasicCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        " The compliance statement for MTA devices that implement
+          PacketCable or IPCablecom requirements.
+
+          This compliance statement applies to MTA implementations
+          that support PacketCable 1.0 or IPCablecom requirements,
+          which are not IPv6-capable at the time of this
+
+          RFC publication."
+
+    MODULE  -- Unconditionally mandatory groups for MTAs
+
+        MANDATORY-GROUPS {
+            pktcMtaGroup,
+            pktcMtaNotificationGroup
+        }
+
+        OBJECT  pktcMtaDevDhcpServerAddressType
+            SYNTAX      InetAddressType { ipv4(1) }
+            DESCRIPTION
+                " Support for address types other than 'ipv4(1)'
+            is not presently specified and therefore is not
+            required.  It may be defined in future versions of
+            this MIB module."
+
+        OBJECT  pktcMtaDevDnsServerAddressType
+            SYNTAX      InetAddressType { ipv4(1) }
+            DESCRIPTION
+                " Support for address types other than 'ipv4(1)'
+            is not presently specified and therefore is not
+            required.  It may be defined in future versions of
+            this MIB module."
+
+        OBJECT  pktcMtaDevTimeServerAddressType
+            SYNTAX      InetAddressType { ipv4(1) }
+            DESCRIPTION
+                " Support for address types other than 'ipv4(1)'
+            is not presently specified and therefore is not
+            required.  It may be defined in future versions of
+            this MIB module."
+
+        OBJECT    pktcMtaDevServerDhcp1
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevServerDhcp2
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevServerDns1
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevServerDns2
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevTimeServer
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevProvConfigEncryptAlg
+            SYNTAX  PktcMtaDevProvEncryptAlg
+            DESCRIPTION
+                 "An implementation is only required to support
+            values of none(0) and des64Cbcmode(1).
+            An IV of zero is used to encrypt in des64Cbcmode, and
+            the length of pktcMtaDevProvConfigKey is 64 bits, as
+            defined in the PacketCable Security specification.
+            Other encryption types may be defined in future
+            versions of this MIB module."
+
+        OBJECT pktcMtaDevRealmOrgName
+            SYNTAX LongUtf8String (SIZE (1..384))
+            DESCRIPTION
+                 "The Organization Name field in X.509 certificates
+            can contain up to 64 UTF-8 encoded characters,
+            as defined in RFCs 3280 and 4630.  Therefore, compliant
+            devices are only required to support Organization
+            Name values of up to 64 UTF-8 encoded characters.
+            Given that RFCs 3280 and 4630 define the UTF-8 encoding,
+            compliant devices must support a maximum size of 384
+            octets for pktcMtaDevRealmOrgName.  The calculation of
+            384 octets comes from the RFC 3629 UTF-8 encoding
+            definition whereby the UTF-8 encoded characters
+            are encoded as sequences of 1 to 6 octets,
+            assuming that code points as high as 0x7ffffffff
+            might be used.  Subsequent versions of Unicode and ISO
+            10646 have limited the upper bound to 0x10ffff.
+
+            Consequently, the current version of UTF-8, defined in
+            RFC 3629, does not require more than four octets to
+            encode a valid code point."
+    ::= { pktcMtaCompliances 1 }
+
+pktcMtaGroup OBJECT-GROUP
+    OBJECTS {
+            pktcMtaDevResetNow,
+            pktcMtaDevSerialNumber,
+            pktcMtaDevSwCurrentVers,
+            pktcMtaDevFQDN,
+            pktcMtaDevEndPntCount,
+            pktcMtaDevEnabled,
+            pktcMtaDevProvisioningCounter,
+            pktcMtaDevErrorOid,
+            pktcMtaDevErrorValue,
+            pktcMtaDevErrorReason,
+            pktcMtaDevTypeIdentifier,
+            pktcMtaDevProvisioningState,
+            pktcMtaDevHttpAccess,
+            pktcMtaDevCertificate,
+            pktcMtaDevCorrelationId,
+            pktcMtaDevManufacturerCertificate,
+            pktcMtaDevDhcpServerAddressType,
+            pktcMtaDevDnsServerAddressType,
+            pktcMtaDevTimeServerAddressType,
+            pktcMtaDevProvConfigEncryptAlg,
+            pktcMtaDevServerDhcp1,
+            pktcMtaDevServerDhcp2,
+            pktcMtaDevServerDns1,
+            pktcMtaDevServerDns2,
+            pktcMtaDevTimeServer,
+            pktcMtaDevConfigFile,
+            pktcMtaDevSnmpEntity,
+            pktcMtaDevRealmPkinitGracePeriod,
+            pktcMtaDevRealmTgsGracePeriod,
+            pktcMtaDevRealmAvailSlot,
+            pktcMtaDevRealmName,
+            pktcMtaDevRealmOrgName,
+            pktcMtaDevRealmUnsolicitedKeyMaxTimeout,
+            pktcMtaDevRealmUnsolicitedKeyNomTimeout,
+            pktcMtaDevRealmUnsolicitedKeyMaxRetries,
+            pktcMtaDevRealmStatus,
+            pktcMtaDevCmsAvailSlot,
+            pktcMtaDevCmsFqdn,
+            pktcMtaDevCmsKerbRealmName,
+            pktcMtaDevCmsUnsolicitedKeyMaxTimeout,
+            pktcMtaDevCmsUnsolicitedKeyNomTimeout,
+            pktcMtaDevCmsUnsolicitedKeyMaxRetries,
+            pktcMtaDevCmsSolicitedKeyTimeout,
+            pktcMtaDevCmsMaxClockSkew,
+            pktcMtaDevCmsIpsecCtrl,
+            pktcMtaDevCmsStatus,
+            pktcMtaDevResetKrbTickets,
+            pktcMtaDevProvUnsolicitedKeyMaxTimeout,
+            pktcMtaDevProvUnsolicitedKeyNomTimeout,
+            pktcMtaDevProvUnsolicitedKeyMaxRetries,
+            pktcMtaDevProvKerbRealmName,
+            pktcMtaDevProvSolicitedKeyTimeout,
+            pktcMtaDevProvConfigHash,
+            pktcMtaDevProvConfigKey,
+            pktcMtaDevProvState,
+            pktcMtaDevProvisioningTimer,
+            pktcMtaDevTelephonyRootCertificate
+    }
+    STATUS      current
+    DESCRIPTION
+        " A collection of objects for managing PacketCable or
+          IPCablecom MTA implementations."
+    ::= { pktcMtaGroups 1 }
+
+pktcMtaNotificationGroup          NOTIFICATION-GROUP
+    NOTIFICATIONS {
+                  pktcMtaDevProvisioningStatus,
+                  pktcMtaDevProvisioningEnrollment
+    }
+    STATUS      current
+    DESCRIPTION
+        " A collection of notifications dealing with the change of
+          MTA provisioning status."
+    ::= { pktcMtaGroups 2 }
+
+pktcMtaBasicSmtaCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        " The compliance statement for S-MTA devices
+          that implement PacketCable or IPCablecom requirements.
+
+          This compliance statement applies to S-MTA implementations
+          that support PacketCable or IPCablecom requirements,
+          which are not IPv6-capable at the time of this
+          RFC publication."
+
+   MODULE -- Unconditionally Mandatory Groups for S-MTA devices
+        MANDATORY-GROUPS {
+
+            pktcMtaGroup,
+            pktcMtaNotificationGroup
+        }
+
+        OBJECT  pktcMtaDevDhcpServerAddressType
+            SYNTAX      InetAddressType { ipv4(1) }
+            DESCRIPTION
+                " Support for address types other than 'ipv4(1)'
+            is not presently specified and therefore is not
+            required.  It may be defined in future versions of
+            this MIB module."
+
+        OBJECT  pktcMtaDevDnsServerAddressType
+            SYNTAX      InetAddressType { ipv4(1) }
+            DESCRIPTION
+                " Support for address types other than 'ipv4(1)'
+            is not presently specified and therefore is not
+            required.  It may be defined in future versions of
+            this MIB module."
+
+        OBJECT  pktcMtaDevTimeServerAddressType
+            SYNTAX      InetAddressType { ipv4(1) }
+            DESCRIPTION
+                " Support for address types other than 'ipv4(1)'
+            is not presently specified and therefore is not
+            required.  It may be defined in future versions of
+            this MIB module."
+
+        OBJECT    pktcMtaDevServerDhcp1
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevServerDhcp2
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevServerDns1
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevServerDns2
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevTimeServer
+            SYNTAX  InetAddress (SIZE(4))
+            DESCRIPTION
+                 "An implementation is only required to support IPv4
+            addresses.  Other address types support may be defined in
+            future versions of this MIB module."
+
+        OBJECT    pktcMtaDevProvConfigEncryptAlg
+            SYNTAX  PktcMtaDevProvEncryptAlg
+            DESCRIPTION
+                 "An implementation is only required to support
+            values of none(0) and des64Cbcmode(1).
+            An IV of zero is used to encrypt in des64Cbcmode, and
+            the length of pktcMtaDevProvConfigKey is 64 bits, as
+            defined in the PacketCable Security specification.
+            Other encryption types may be defined in future
+            versions of this MIB module."
+
+        OBJECT pktcMtaDevRealmOrgName
+            SYNTAX LongUtf8String (SIZE (1..384))
+            DESCRIPTION
+                 "The Organization Name field in X.509 certificates
+            can contain up to 64 UTF-8 encoded characters, as
+            defined in RFCs 3280 and 4630.  Therefore, compliant
+            devices are only required to support Organization
+            Name values of up to 64 UTF-8 encoded characters.
+            Given that RFCs 3280 and 4630 define the UTF-8 encoding,
+            compliant devices must support a maximum size of 384
+            octets for pktcMtaDevRealmOrgName.  The calculation of
+            384 octets comes from the RFC 3629 UTF-8 encoding
+            definition whereby the UTF-8 encoded characters
+            are encoded as sequences of 1 to 6 octets,
+            assuming that code points as high as 0x7ffffffff
+            might be used.  Subsequent versions of Unicode and ISO
+            10646 have limited the upper bound to 0x10ffff.
+            Consequently, the current version of UTF-8, defined in
+            RFC 3629 does not require more than four octets to
+            encode a valid code point."
+    MODULE DOCS-CABLE-DEVICE-MIB
+        MANDATORY-GROUPS {
+
+            docsDevSoftwareGroupV2
+        }
+
+    MODULE DOCS-IETF-BPI2-MIB
+        MANDATORY-GROUPS {
+            docsBpi2CodeDownloadGroup
+        }
+     ::= { pktcMtaCompliances 2 }
+
+END
diff --git a/snmp_builder/mibs/PKTC-IETF-SIG-MIB.mib b/snmp_builder/mibs/PKTC-IETF-SIG-MIB.mib
new file mode 100644
index 0000000..0f0a26d
--- /dev/null
+++ b/snmp_builder/mibs/PKTC-IETF-SIG-MIB.mib
@@ -0,0 +1,3021 @@
+PKTC-IETF-SIG-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Integer32,
+    Unsigned32,
+    mib-2
+          FROM SNMPv2-SMI                   -- [RFC2578]
+    InetAddressType,
+    InetAddress,
+    InetPortNumber
+          FROM INET-ADDRESS-MIB             -- [RFC4001]
+    TEXTUAL-CONVENTION,
+    RowStatus,
+    TruthValue
+          FROM SNMPv2-TC                    -- [RFC2579]
+
+    OBJECT-GROUP,
+    MODULE-COMPLIANCE
+          FROM SNMPv2-CONF                  -- [RFC2580]
+    SnmpAdminString
+          FROM SNMP-FRAMEWORK-MIB           -- [RFC3411]
+    ifIndex
+          FROM IF-MIB                       -- [RFC2863]
+    Dscp
+          FROM DIFFSERV-DSCP-TC;            -- [RFC3289]
+
+pktcIetfSigMib MODULE-IDENTITY
+    LAST-UPDATED    "200712180000Z" -- December 18, 2007
+    ORGANIZATION    "IETF IPCDN Working Group"
+    CONTACT-INFO
+        "Sumanth Channabasappa
+         Cable Television Laboratories, Inc.
+         858 Coal Creek Circle,
+         Louisville, CO 80027, USA
+         Phone: +1 303-661-3307
+         Email: Sumanth@cablelabs.com
+
+         Gordon Beacham
+         Motorola, Inc.
+         6450 Sequence Drive, Bldg. 1
+         San Diego, CA 92121, USA
+         Phone: +1 858-404-2334
+         Email: gordon.beacham@motorola.com
+
+         Satish Kumar Mudugere Eswaraiah
+         Texas Instruments India (P) Ltd.,
+         Golf view, Wind Tunnel Road
+         Murugesh Palya
+         Bangalore 560 017, INDIA
+         Phone:   +91 80 5269451
+         Email:  satish.kumar@ti.com
+
+    IETF IPCDN Working Group
+         General Discussion: ipcdn@ietf.org
+         Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+         Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+         Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
+         Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"
+    DESCRIPTION
+       "This MIB module supplies the basic management
+        objects for the PacketCable and IPCablecom Signaling
+        protocols.  This version of the MIB includes
+        common signaling and Network Call Signaling
+
+        (NCS)-related signaling objects.
+
+        Copyright (C) The IETF Trust (2008).  This version of
+        this MIB module is part of RFC 5098; see the RFC itself for
+        full legal notices."
+    REVISION                "200712180000Z"
+    DESCRIPTION
+       "Initial version, published as RFC 5098."
+::=  { mib-2 169 }
+
+-- Textual Conventions
+
+TenthdBm ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d-1"
+    STATUS       current
+    DESCRIPTION
+        "This TEXTUAL-CONVENTION represents power levels that are
+         normally expressed in dBm.  Units are in tenths of a dBm;
+         for example, -13.5 dBm will be represented as -135."
+    SYNTAX       Integer32
+
+PktcCodecType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        " This TEXTUAL-CONVENTION defines various types of codecs
+          that MAY be supported.  The description for each
+          enumeration is listed below:
+
+          Enumeration     Description
+          other           a defined codec not in the enumeration
+          unknown         a codec not defined by the PacketCable
+                          Codec Specification
+          g729            ITU-T Recommendation G.729
+          reserved        for future use
+          g729E           ITU-T Recommendation G.729E
+          pcmu            Pulse Code Modulation u-law (PCMU)
+          g726at32        ITU-T Recommendation G.726-32 (32 kbit/s)
+          g728            ITU-T Recommendation G.728
+          pcma            Pulse Code Modulation a-law (PCMA)
+          g726at16        ITU-T Recommendation G.726-16 (16 kbit/s)
+          g726at24        ITU-T Recommendation G.726-24 (24 kbit/s)
+          g726at40        ITU-T Recommendation G.726-40 (40 kbit/s)
+          ilbc            IETF Internet low-bit rate codec
+          bv16            Broadcom BroadVoice16
+
+          The list of codecs is consistent with the IETF
+          Real-Time Transport Protocol (RTP) Profile registry and
+
+          the RTP Map Parameters Table in PacketCable Audio/Video
+          Codecs Specification [PKT-SP-CODEC].  The literal codec
+          name for each codec is listed below:
+
+          Codec     Literal Codec Name
+          g729              G729
+          g729E             G729E
+          pcmu              PCMU
+          g726at32          G726-32
+          g728              G728
+          pcma              PCMA
+          g726at16          G726-16
+          g726at24          G726-24
+          g726at40          G726-40
+          ilbc              iLBC
+          bv16              BV16
+
+          The literal codec name is the second column of the table
+          with codec RTP Map Parameters.  The Literal Codec Name Column
+          contains the codec name used in the local connection
+          options (LCO) of the NCS messages create connection
+          (CRCX)/modify connection (MDCX) and is also used to
+          identify the codec in the Call Management System (CMS)
+          Provisioning Specification.  The RTP Map Parameter column of
+          the Table contains the string used in the media attribute
+          line (a=) of the session description protocol (SDP)
+          parameters in NCS messages."
+    SYNTAX INTEGER {
+               other     (1),
+               unknown   (2),
+               g729      (3),
+               reserved  (4),
+               g729E     (5),
+               pcmu      (6),
+               g726at32  (7),
+               g728      (8),
+               pcma      (9),
+               g726at16  (10),
+               g726at24  (11),
+               g726at40  (12),
+               ilbc      (13),
+               bv16      (14)
+    }
+
+PktcRingCadence   ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+          "This object provides an encoding scheme for ring
+
+          cadences, including repeatability characteristics.  All
+          fields in this object MUST be encoded in network-byte
+          order.
+
+          The first three higher-order octets are reserved.  The
+          octets that follow are used to encode a 'bit-string', with
+          each bit corresponding to 50 milliseconds.  A bit value of
+          '1' indicates the presence of a ring-tone, and a bit value
+          of '0' indicates the absence of a ring-tone, for that
+          duration (50 ms) (Note: A minimum number of octets
+          required to encode the bit-string MUST be used).
+
+          The first two of the reserved octets MUST indicate the
+          length of the encoded cadence (in bits) and MUST range
+          between 1 and 264.  (Note: The length in bits MUST also be
+          consistent with the number of octets that encode the
+          cadence).  The MTA MUST ignore any unused bits in the last
+          octet, but MUST reflect the value as provided on
+          subsequent SNMP GETs.
+
+          The third of the reserved octets indicates 'repeatability'
+          and MUST be either 0x80 or 0x00 -- the former value
+          indicating 'non-repeatability', and the latter indicating
+          'repeatability'.
+
+          The MTA MUST reject attempts to set a value that violates
+          any of the above requirements."
+    SYNTAX  OCTET STRING (SIZE(4..36))
+
+PktcSigType     ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        " This object lists the various types of signaling that may
+          be supported:
+
+          other(1) - set when signaling other than NCS is used
+          ncs(2)   - Network Call Signaling is a derivation of MGCP
+                    (Media Gateway Control Protocol) defined for
+                     IPCablecom/PacketCable MTAs."
+    SYNTAX INTEGER {
+                   other(1),
+                   ncs(2)
+    }
+
+DtmfCode::=TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "This TEXTUAL-CONVENTION represents the Dual-Tone
+         Multi-Frequency (DTMF) Character used
+         to indicate the start or end of the digit transition
+         sequence used for caller id or Visual Message Waiting
+         Indicator (VMWI).
+
+         Note: The DTMF code '*' is indicated using 'dtmfcodeStar',
+         and the DTMF code '#' is indicated using ' dtmfcodeHash'."
+    SYNTAX       INTEGER {
+                  dtmfcode0(0),
+                  dtmfcode1(1),
+                  dtmfcode2(2),
+                  dtmfcode3(3),
+                  dtmfcode4(4),
+                  dtmfcode5(5),
+                  dtmfcode6(6),
+                  dtmfcode7(7),
+                  dtmfcode8(8),
+                  dtmfcode9(9),
+                  dtmfcodeStar(10),
+                  dtmfcodeHash(11),
+                  dtmfcodeA(12),
+                  dtmfcodeB(13),
+                  dtmfcodeC(14),
+                  dtmfcodeD(15)
+}
+
+PktcSubscriberSideSigProtocol::=TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "This TEXTUAL-CONVENTION represents the Signaling
+         protocol being used for purposes such as caller id
+         or VMWI.
+
+         A value of fsk(1) indicates Frequency Shift Keying
+         (FSK).
+         A value of dtmf(2) indicates Dual-Tone Multi-Frequency
+         (DTMF)."
+         SYNTAX INTEGER {
+                fsk(1),
+                dtmf(2)
+         }
+
+pktcSigMibObjects OBJECT IDENTIFIER ::= { pktcIetfSigMib 1 }
+pktcSigDevObjects OBJECT IDENTIFIER ::=
+
+                                        { pktcSigMibObjects 1 }
+pktcSigEndPntConfigObjects OBJECT IDENTIFIER ::=
+                                        { pktcSigMibObjects 2 }
+--
+-- The codec table (pktcSigDevCodecTable) defines all combinations
+-- of codecs supported by the Multimedia Terminal Adapter (MTA).
+--
+pktcSigDevCodecTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PktcSigDevCodecEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         " This table describes the MTA-supported codec types.  An MTA
+          MUST populate this table with all possible combinations of
+          codecs it supports for simultaneous operation.  For example,
+          an MTA with two endpoints may be designed with a particular
+          Digital Signal Processing (DSP) and memory architecture that
+          allows it to support the following fixed combinations of
+          codecs for simultaneous operation:
+
+          Codec Type     Maximum Number of Simultaneous Codecs
+          PCMA                             3
+
+          PCMA                             2
+          PCMU                             1
+
+          PCMA                             1
+
+          PCMU                             2
+
+          PCMU                             3
+
+          PCMA                             1
+          G729                             1
+
+          G729                             2
+
+          PCMU                             1
+          G729                             1
+
+          Based on this example, the entries in the codec table
+          would be:
+
+            pktcSigDev        pktcSigDev        pktcSigDev
+          CodecComboIndex     CodecType          CodecMax
+                 1               pcma                3
+                 2               pcma                2
+                 2               pcmu                1
+
+                 3               pcma                1
+                 3               pcmu                2
+                 4               pcmu                3
+                 5               pcma                1
+                 5               g729                1
+                 6               g729                2
+                 7               pcmu                1
+                 7               g729                1
+
+          An operator querying this table is able to determine all
+          possible codec combinations the MTA is capable of
+          simultaneously supporting.
+
+          This table MUST NOT include non-voice codecs."
+    ::= { pktcSigDevObjects 1 }
+
+pktcSigDevCodecEntry  OBJECT-TYPE
+    SYNTAX      PktcSigDevCodecEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each entry represents the maximum number of active
+         connections with a particular codec the MTA is capable of
+         supporting.  Each row is indexed by a composite key
+         consisting of a number enumerating the particular codec
+         combination and the codec type."
+    INDEX { pktcSigDevCodecComboIndex, pktcSigDevCodecType }
+    ::= { pktcSigDevCodecTable 1 }
+
+PktcSigDevCodecEntry  ::= SEQUENCE {
+    pktcSigDevCodecComboIndex    Unsigned32,
+    pktcSigDevCodecType     PktcCodecType,
+    pktcSigDevCodecMax      Unsigned32
+    }
+
+pktcSigDevCodecComboIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        " The index value that enumerates a particular codec
+          combination in the pktcSigDevCodecTable."
+    ::= { pktcSigDevCodecEntry 1 }
+
+pktcSigDevCodecType  OBJECT-TYPE
+    SYNTAX       PktcCodecType
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " A codec type supported by this MTA."
+    ::= { pktcSigDevCodecEntry 2 }
+
+pktcSigDevCodecMax  OBJECT-TYPE
+    SYNTAX      Unsigned32(1..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " The maximum number of simultaneous sessions of a
+          particular codec that the MTA can support."
+    ::= { pktcSigDevCodecEntry 3 }
+
+--
+-- These are the common signaling-related definitions that affect
+-- the entire MTA device.
+--
+
+pktcSigDevEchoCancellation  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This object specifies if the device is capable of echo
+          cancellation.  The MTA MUST set this MIB object to a
+          value of true(1) if it is capable of echo
+          cancellation, and a value of false(2) if not."
+    ::= { pktcSigDevObjects 2 }
+
+pktcSigDevSilenceSuppression  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This object specifies if the device is capable of
+          silence suppression (as a result of Voice Activity
+          Detection).  The MTA MUST set this MIB object to a
+          value of true(1) if it is capable of silence
+          suppression, and a value of false(2) if not."
+::= { pktcSigDevObjects 3 }
+
+pktcSigDevCidSigProtocol  OBJECT-TYPE
+    SYNTAX       PktcSubscriberSideSigProtocol
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This object is used to configure the subscriber-line
+         protocol used for signaling on-hook caller id information.
+
+         Different countries define different caller id signaling
+         protocols to support caller identification.
+
+         Setting this object at a value fsk(1) sets the subscriber
+         line protocol to be Frequency Shift Keying (FSK).
+
+         Setting this object at a value dtmf(2) sets the subscriber
+         line protocol to be Dual-Tone Multi-Frequency (DTMF).
+
+         The value of this MIB object MUST NOT persist across MTA
+         reboots."
+     REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+     DEFVAL { fsk }
+::= { pktcSigDevObjects 4 }
+
+pktcSigDevR0Cadence     OBJECT-TYPE
+    SYNTAX      PktcRingCadence
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object specifies ring cadence 0 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 5 }
+
+pktcSigDevR1Cadence     OBJECT-TYPE
+    SYNTAX      PktcRingCadence
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object specifies ring cadence 1 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 6 }
+
+pktcSigDevR2Cadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        " This object specifies ring cadence 2 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 7 }
+
+pktcSigDevR3Cadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies ring cadence 3 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 8 }
+
+pktcSigDevR4Cadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies ring cadence 4 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 9 }
+
+pktcSigDevR5Cadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies ring cadence 5 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 10 }
+
+pktcSigDevR6Cadence     OBJECT-TYPE
+    SYNTAX      PktcRingCadence
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object specifies ring cadence 6 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 11 }
+
+pktcSigDevR7Cadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies ring cadence 7 (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 12 }
+
+pktcSigDevRgCadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies ring cadence rg (a user-defined
+          field).
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 13 }
+
+pktcSigDevRsCadence     OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies ring cadence rs (a user-defined
+          field).  The MTA MUST reject any attempt to make this object
+          repeatable.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    ::= { pktcSigDevObjects 14 }
+
+pktcSigDefCallSigDscp  OBJECT-TYPE
+    SYNTAX      Dscp  -- RFC 3289: DIFFSERV-DSCP-TC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " The default value used in the IP header for setting the
+          Differentiated Services Code Point (DSCP) value for call
+
+          signaling.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    DEFVAL { 0 }
+    ::= { pktcSigDevObjects 15 }
+
+pktcSigDefMediaStreamDscp  OBJECT-TYPE
+    SYNTAX      Dscp  -- RFC 3289: DIFFSERV-DSCP-TC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        " This object contains the default value used in the IP
+          header for setting the Differentiated Services Code Point
+          (DSCP) value for media stream packets.  The MTA MUST NOT
+          update this object with the value supplied by the CMS in
+          the NCS messages (if present).  Any currently active
+          connections are not affected by updates to this object.
+          When the value of this object is updated by SNMP, the MTA
+          MUST use the new value as a default starting only from
+          new connections.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    DEFVAL { 0 }
+    ::= { pktcSigDevObjects 16 }
+
+--
+-- pktcSigCapabilityTable - This table defines the valid signaling
+-- types supported by this MTA.
+--
+
+pktcSigCapabilityTable    OBJECT-TYPE
+    SYNTAX        SEQUENCE OF PktcSigCapabilityEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        " This table describes the signaling types supported by this
+          MTA."
+    ::= { pktcSigDevObjects 17 }
+
+pktcSigCapabilityEntry    OBJECT-TYPE
+    SYNTAX        PktcSigCapabilityEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        " Entries in pktcMtaDevSigCapabilityTable - list of
+          supported signaling types, versions, and vendor extensions
+
+          for this MTA.  Each entry in the list provides for one
+          signaling type and version combination.  If the device
+          supports multiple versions of the same signaling type, it
+          will require multiple entries."
+    INDEX { pktcSigCapabilityIndex }
+    ::= { pktcSigCapabilityTable 1 }
+
+PktcSigCapabilityEntry  ::= SEQUENCE {
+    pktcSigCapabilityIndex             Unsigned32,
+    pktcSigCapabilityType              PktcSigType,
+    pktcSigCapabilityVersion           SnmpAdminString,
+    pktcSigCapabilityVendorExt         SnmpAdminString
+    }
+
+pktcSigCapabilityIndex       OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..255)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        " The index value that uniquely identifies an entry in the
+          pktcSigCapabilityTable."
+    ::= { pktcSigCapabilityEntry 1 }
+
+pktcSigCapabilityType      OBJECT-TYPE
+    SYNTAX        PktcSigType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        " This object identifies the type of signaling used.  This
+          value has to be associated with a single signaling
+          version."
+    ::= { pktcSigCapabilityEntry 2 }
+
+pktcSigCapabilityVersion      OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        " Provides the version of the signaling type - reference
+          pktcSigCapabilityType.  Examples would be 1.0 or 2.33 etc."
+    ::= { pktcSigCapabilityEntry 3 }
+
+pktcSigCapabilityVendorExt      OBJECT-TYPE
+    SYNTAX        SnmpAdminString
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        " The vendor extension allows vendors to provide a list of
+
+          additional capabilities.
+
+          The syntax for this MIB object in ABNF ([RFC5234]) is
+          specified to be zero or more occurrences of vendor
+          extensions, as follows:
+
+           pktcSigCapabilityVendorExt  = *(vendor-extension)
+           vendor-extension = (ext symbol alphanum) DQUOTE ; DQUOTE
+           ext      = DQUOTE %x58 DQUOTE
+           symbol   = (DQUOTE %x2D DQUOTE)/(DQUOTE %x2D DQUOTE)
+           alphanum = 1*6(ALPHA/DIGIT)
+        "
+    ::= { pktcSigCapabilityEntry 4 }
+
+pktcSigDefNcsReceiveUdpPort  OBJECT-TYPE
+    SYNTAX      InetPortNumber (1025..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        " This object contains the MTA User Datagram Protocol (UDP)
+          receive port that is being used for NCS call signaling.
+          This object should only be changed by the configuration
+          file.
+
+          Unless changed via configuration, this MIB object MUST
+          reflect a value of '2427'."
+    REFERENCE
+        "PacketCable NCS Specification"
+    ::= { pktcSigDevObjects 18 }
+
+pktcSigPowerRingFrequency    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                 f20Hz(1),
+                 f25Hz(2),
+                 f33Point33Hz(3),
+                 f50Hz(4),
+                 f15Hz(5),
+                 f16Hz(6),
+                 f22Hz(7),
+                 f23Hz(8),
+                 f45Hz(9)
+    }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This object must only be provided via the configuration
+          file during the provisioning process.  The power ring
+
+          frequency is the frequency at which the sinusoidal voltage
+          must travel down the twisted pair to make terminal
+          equipment ring.  Different countries define different
+          electrical characteristics to make terminal equipment
+          ring.
+
+          The f20Hz setting corresponds to a power ring frequency
+          of 20 Hertz.  The f25Hz setting corresponds to a power ring
+          frequency of 25 Hertz.  The f33Point33Hz setting
+          corresponds to a power ring frequency of 33.33 Hertz.  The
+          f50Hz setting corresponds to a power ring frequency of 50
+          Hertz.  The f15Hz setting corresponds to a power ring
+          frequency of 15 Hertz.  The f16Hz setting corresponds to a
+          power ring frequency of 16 Hertz.  The f22Hz setting
+          corresponds to a power ring frequency of 22 Hertz.  The
+          f23Hz setting corresponds to a power ring frequency of 23
+          Hertz.  The f45Hz setting corresponds to a power ring
+          frequency of 45 Hertz."
+    REFERENCE
+          "ETSI-EN-300-001"
+    ::= { pktcSigDevObjects 19 }
+
+pktcSigPulseSignalTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF PktcSigPulseSignalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " The Pulse signal table defines the pulse signal operation.
+          There are nine types of international pulse signals,
+          with each signal having a set of provisionable parameters.
+          The values of the MIB objects in this table take effect
+          only if these parameters are not defined via signaling, in
+          which case, the latter determines the values of the
+          parameters.  The MIB objects in this table do not persist
+          across MTA reboots."
+    REFERENCE
+        "ETSI-TS-101-909-4 Specification"
+    ::= { pktcSigDevObjects 20 }
+
+pktcSigPulseSignalEntry    OBJECT-TYPE
+    SYNTAX       PktcSigPulseSignalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " This object defines the set of parameters associated with
+          each particular value of pktcSigPulseSignalType.  Each
+          entry in the pktcSigPulseSignalTable is indexed by the
+          pktcSigPulseSignalType object.
+
+          The conceptual rows MUST NOT persist across MTA reboots."
+    INDEX { pktcSigPulseSignalType }
+    ::= { pktcSigPulseSignalTable 1 }
+
+PktcSigPulseSignalEntry ::= SEQUENCE {
+        pktcSigPulseSignalType              INTEGER,
+        pktcSigPulseSignalFrequency         INTEGER,
+        pktcSigPulseSignalDbLevel           TenthdBm,
+        pktcSigPulseSignalDuration          Unsigned32,
+        pktcSigPulseSignalPulseInterval     Unsigned32,
+        pktcSigPulseSignalRepeatCount       Unsigned32
+}
+
+pktcSigPulseSignalType    OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                     initialRing(1),
+                     pulseLoopClose(2),
+                     pulseLoopOpen(3),
+                     enableMeterPulse(4),
+                     meterPulseBurst(5),
+                     pulseNoBattery(6),
+                     pulseNormalPolarity(7),
+                     pulseReducedBattery(8),
+                     pulseReversePolarity(9)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "There are nine types of international pulse signals.  These
+         signals are defined as follows:
+         initial ring
+         pulse loop close
+         pulse loop open
+         enable meter pulse
+         meter pulse burst
+         pulse no battery
+         pulse normal polarity
+         pulse reduced battery
+         pulse reverse polarity"
+    REFERENCE
+        "ETSI-EN-300-324-1 Specification"
+    ::= { pktcSigPulseSignalEntry 1 }
+
+pktcSigPulseSignalFrequency    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                 twentyfive(1),
+                 twelvethousand(2),
+                 sixteenthousand(3)
+    }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object is only applicable to the initialRing,
+          enableMeterPulse, and meterPulseBurst signal types.  This
+          object identifies the frequency of the generated signal.
+          The following table defines the default values for this
+          object depending on signal type:
+
+          pktcSigPulseSignalType     Default
+          initialRing                25
+          enableMeterPulse           16000
+          meterPulseBurst            16000
+
+          The value of twentyfive MUST only be used for the
+          initialRing signal type.  The values of twelvethousand and
+          sixteenthousand MUST only be used for enableMeterPulse and
+          meterPulseBurst signal types.  An attempt to set this
+          object while the value of pktcSigPulseSignalType is not
+          initialRing, enableMeterPulse, or meterPulseBurst will
+          result in an 'inconsistentValue' error."
+    REFERENCE
+        "ETSI-EN-300-001 Specification"
+         ::= { pktcSigPulseSignalEntry 2}
+
+pktcSigPulseSignalDbLevel    OBJECT-TYPE
+    SYNTAX       TenthdBm (-350..0)
+    UNITS        "1/10 of a dBm"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object is only applicable to the enableMeterPulse and
+          meterPulseBurst signal types.  This is the decibel level
+          for each frequency at which tones could be generated at
+          the a and b terminals (TE connection point).  An attempt to
+          set this object while the value of pktcSigPulseSignalType
+          is not enableMeterPulse or meterPulseBurst will result in
+          an 'inconsistentValue' error."
+    REFERENCE
+        "ETSI-EN-300-001 Specification"
+    DEFVAL { -135 }
+    ::={pktcSigPulseSignalEntry 3 }
+
+pktcSigPulseSignalDuration    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..5000)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the pulse duration for each
+          signal type.  In addition, the MTA must accept the values
+          in the incremental steps specific for each signal type.
+          The following table defines the default values and the
+          incremental steps for this object depending on the signal
+          type:
+
+          pktcSigPulseSignaltype  Default (ms)   Increment (ms)
+          initialRing                 200             50
+          pulseLoopClose              200             10
+          pulseLoopOpen               200             10
+          enableMeterPulse            150             10
+          meterPulseBurst             150             10
+          pulseNoBattery              200             10
+          pulseNormalPolarity         200             10
+          pulseReducedBattery         200             10
+          pulseReversePolarity        200             10
+
+          An attempt to set this object to a value that does not
+          fall on one of the increment boundaries, or on the wrong
+          increment boundary for the specific signal type, will
+          result in an 'inconsistentValue' error."
+    REFERENCE
+        "ETSI-EN-300-324-1 Specification"
+         ::= {pktcSigPulseSignalEntry 4 }
+
+pktcSigPulseSignalPulseInterval     OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..5000)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the repeat interval, or the period,
+          for each signal type.  In addition, the MTA must accept
+          the values in the incremental steps specific for each
+          signal type.  The following table defines the default
+          values and the incremental steps for this object, depending
+          on the signal type:
+
+          pktcSigPulseSignaltype  Default (ms)   Increment (ms)
+          initialRing                 200             50
+          pulseLoopClose             1000             10
+          pulseLoopOpen              1000             10
+
+          enableMeterPulse           1000             10
+          meterPulseBurst            1000             10
+          pulseNoBattery             1000             10
+          pulseNormalPolarity        1000             10
+          pulseReducedBattery        1000             10
+          pulseReversePolarity       1000             10
+
+          An attempt to set this object to a value that does not
+          fall on one of the increment boundaries, or on the wrong
+          increment boundary for the specific signal type, will
+          result in an 'inconsistentValue' error."
+    REFERENCE
+        "ETSI-EN-300-324-1 Specification"
+         ::= { pktcSigPulseSignalEntry 5}
+
+pktcSigPulseSignalRepeatCount    OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..50)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies how many times to repeat a pulse.
+          This object is not used by the enableMeterPulse signal
+          type, and in that case, the value is irrelevant.  The
+          following table defines the default values and the valid
+          ranges for this object, depending on the signal type:
+
+          pktcSigPulseSignaltype  Default   Range
+
+          initialRing                1       1-5
+          pulseLoopClose             1       1-50
+          pulseLoopOpen              1       1-50
+          enableMeterPulse      (any value)(but not used)
+          meterPulseBurst            1       1-50
+          pulseNoBattery             1       1-50
+          pulseNormalPolarity        1       1-50
+          pulseReducedBattery        1       1-50
+          pulseReversePolarity       1       1-50
+
+          An attempt to set this object to a value that does not
+          fall within the range for the specific
+          signal type will result in an 'inconsistentValue' error."
+    ::={ pktcSigPulseSignalEntry 6 }
+
+pktcSigDevCidMode    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                 duringRingingETS(1),
+                 dtAsETS(2),
+                 rpAsETS(3),
+                 lrAsETS(4),
+                 lrETS(5)
+                 }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        " For on-hook caller id, pktcSigDevCidMode selects the method
+          for representing and signaling caller identification.  For
+          the duringRingingETS method, the Frequency Shift Keying
+          (FSK) or the Dual-Tone Multi-Frequency (DTMF) containing
+          the caller identification information is sent between the
+          first and second ring pattern.
+
+          For the dtAsETS,rpAsETS, lrAsETS and lrETS
+          methods, the FSK or DTMF containing the caller id
+          information is sent before the first ring pattern.
+
+          For the dtAsETS method, the FSK or DTMF is sent after the
+          Dual Tone Alert Signal.  For the rpAsETS method, the FSK or
+          DTMF is sent after a Ring Pulse.
+
+          For the lrAsETS method, the Line Reversal occurs first,
+          then the Dual Tone Alert Signal, and, finally, the FSK or
+          DTMF is sent.
+
+          For the lrETS method, the Line Reversal occurs first,
+          then the FSK or DTMF is sent.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    DEFVAL { rpAsETS}
+    ::= {pktcSigDevObjects 21 }
+
+pktcSigDevCidAfterRing     OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|50..2000)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of first
+          ringing pattern and the start of the transmission of the
+          FSK or DTMF containing the caller id information.  It is
+          only used when pktcSigDevCidMode is set to a value of
+          'duringRingingETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+
+         (pktcSigDevCidMode), and MUST be followed:
+
+          Value of pktcSigDevCidMode       Default value
+
+          duringringingETS                 550 ms
+          dtAsETS                          any value (not used)
+          rpAsETS                          any value (not used)
+          lrAsETS                          any value (not used)
+          lrETS                            any value (not used)
+
+          An attempt to set this object while the value of
+          pktcSigDevCidMode is not duringringingETS will result in
+          an 'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 550 }
+    ::= {pktcSigDevObjects 22 }
+
+pktcSigDevCidAfterDTAS    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|45..500)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          Dual Tone Alert Signal (DT-AS) and the start of the
+          transmission of the FSK or DTMF containing the caller id
+          information.  This object is only used when
+          pktcSigDevCidMode is set to a value of 'dtAsETS' or
+          'lrAsETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevCidMode), and MUST be followed:
+
+          Value of pktcSigDevCidMode       Default value
+
+          duringringingETS                 any value (not used)
+          dtAsETS                          50 ms
+          rpAsETS                          any value (not used)
+          lrAsETS                          50 ms
+          lrETS                            any value (not used)
+
+          An attempt to set this object while the value of
+
+          pktcSigDevCidMode is not 'dtAsETS' or 'lrAsETS' will
+          result in an 'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 50 }
+    ::= {pktcSigDevObjects 23 }
+
+pktcSigDevCidAfterRPAS    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|500..800)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          Ring Pulse Alert Signal (RP-AS) and the start of the
+          transmission of the FSK or DTMF containing the caller id
+          information.  This MIB object is only used when
+          pktcSigDevCidMode is set to a value of 'rpAsETS'.
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevCidMode), and MUST be followed:
+
+          Value of pktcSigDevCidMode       Default value
+
+          duringringingETS                 any value  (not used)
+          dtAsETS                          any value  (not used)
+          rpAsETS                          650 ms
+          lrAsETS                          any value  (not used)
+          lrETS                            any value  (not used)
+
+          An attempt to set this object while the value of
+          pktcSigDevCidMode is not 'rpAsETS' will result in an
+          'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 650 }
+    ::= {pktcSigDevObjects 24 }
+
+pktcSigDevRingAfterCID    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|50..500)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          complete transmission of the FSK or DTMF containing the
+          caller id information and the start of the first ring
+          pattern.  It is only used when pktcSigDevCidMode is
+          set to a value of 'dtAsETS', 'rpAsETS', 'lrAsETS' or
+          'lrETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevCidMode), and MUST be followed:
+
+          Value of pktcSigDevCidMode       Default value
+
+          duringringingETS                 any value  (not used)
+          dtAsETS                          250 ms
+          rpAsETS                          250 ms
+          lrAsETS                          250 ms
+          lrETS                            250 ms
+
+          An attempt to set this object while the value of
+          pktcSigDevCidMode is not 'dtAsETS', 'rpAsETS',
+          'lrAsETS', or 'lrETS' will result in an 'inconsistent
+          value' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 250 }
+    ::= {pktcSigDevObjects 25 }
+
+pktcSigDevCidDTASAfterLR    OBJECT-TYPE
+    SYNTAX       Unsigned32 (50..655)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          Line Reversal and the start of the Dual Tone Alert Signal
+          (DT-AS).  This object is only used when pktcSigDevCidMode
+          is set to a value of 'lrAsETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevCidMode), and MUST be followed:
+
+          Value of pktcSigDevCidMode       Default value
+
+          duringringingETS                 any value  (not used)
+          dtAsETS                          any value  (not used)
+          rpAsETS                          any value  (not used)
+          lrAsETS                          250 ms
+          lrETS                            any value  (not used)
+
+          An attempt to set this object while the value of
+          pktcSigDevCidMode is not lrAsETS will result in an
+          'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 250 }
+    ::= {pktcSigDevObjects 26 }
+
+pktcSigDevVmwiMode    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                 dtAsETS(1),
+                 rpAsETS(2),
+                 lrAsETS(3),
+                 osi(4),
+                 lrETS(5)
+                 }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        " For visual message waiting indicator (VMWI),
+          pktcSigDevVmwiMode selects the alerting signal method.  For
+          the dtAsETS, rpAsETS, lrAsETS, osi, and lrETS methods,
+          the FSK containing the VMWI information is sent after an
+          alerting signal.
+
+          For the dtAsETS method, the FSK, or DTMF
+          is sent after the Dual Tone Alert Signal.  For the rpAsETS
+          method, the FSK or DTMF is sent after a Ring Pulse.
+
+          For the lrAsETS method, the Line Reversal occurs first,
+          then the Dual Tone Alert Signal, and, finally, the FSK or
+          DTMF is sent.
+
+          For the OSI method, the FSK or DTMF is sent after the Open
+          Switching Interval.
+
+          For the lrETS method, the Line Reversal occurs first,
+          then the FSK or DTMF is sent.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    DEFVAL { rpAsETS }
+    ::= {pktcSigDevObjects 27 }
+
+pktcSigDevVmwiAfterDTAS    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|45..500)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          Dual Tone Alert Signal (DT-AS) and the start of the
+          transmission of the FSK or DTMF containing the VMWI
+          information.
+
+          This object is only used when pktcSigDevVmwiMode is
+          set to a value of 'dtAsETS' or 'lrAsETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevVmwiMode), and MUST be followed:
+
+          Value of pktcSigDevVmwiMode       Default value
+
+          dtAsETS                           50 ms
+          rpAsETS                           any value  (not used)
+          lrAsETS                           50 ms
+          lrETS                             any value  (not used)
+
+          An attempt to set this object while the value of
+          pktcSigDevVmwiMode is not 'dtAsETS' or 'lrAsETS' will
+          result in an 'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 50 }
+    ::= {pktcSigDevObjects 28 }
+
+pktcSigDevVmwiAfterRPAS    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|500..800)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          Ring Pulse Alert Signal (RP-AS) and the start of the
+          transmission of the FSK or DTMF containing the VMWI
+          information.
+
+          This object is only used when pktcSigDevVmwiMode is
+          set to a value of 'rpAsETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevVmwiMode), and MUST be followed:
+
+          Value of pktcSigDevVmwiMode       Default value
+
+          dtAsETS                           any value  (not used)
+          rpAsETS                           650 ms
+          lrAsETS                           any value  (not used)
+          lrETS                             any value  (not used)
+
+          An attempt to set this object while the value of
+          pktcSigDevVmwiMode is not 'rpAsETS' will result in an
+          'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 650 }
+    ::= {pktcSigDevObjects 29 }
+
+pktcSigDevVmwiDTASAfterLR    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0|50..655)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        " This object specifies the delay between the end of the
+          Line Reversal and the start of the Dual Tone Alert Signal
+          (DT-AS) for VMWI information.  This object is only used
+          when pktcSigDevVmwiMode is set to a value of 'lrAsETS'.
+
+          The following table defines the default values
+          for this MIB object, depending on the signal type
+         (pktcSigDevVmwiMode), and MUST be followed:
+
+          Value of pktcSigDevVmwiMode       Default value
+
+          dtAsETS                           any value  (not used)
+          rpAsETS                           any value  (not used)
+          lrAsETS                           250 ms
+          lrETS                             any value  (not used)
+
+          An attempt to set this object while the value of
+          pktcSigDevVmwiMode is not 'lrAsETS' will result in an
+          'inconsistentValue' error.
+
+          The value of this MIB object MUST NOT persist across MTA
+          reboots."
+    REFERENCE
+        "ETSI-EN-300-659-1 Specification"
+    DEFVAL { 250 }
+    ::= {pktcSigDevObjects 30 }
+
+pktcSigDevRingCadenceTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF PktcSigDevRingCadenceEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Cadence rings are defined by the telco governing
+         body for each country.  The MTA must be able to support
+         various ranges of cadence patterns and cadence periods.
+         The MTA will be able to support country-specific
+         provisioning of the cadence and idle period.  Each
+         cadence pattern will be assigned a unique value ranging
+         from 0-127 (inclusive) corresponding to the value of x,
+         where x is the value sent in the cadence ringing (cr)
+         signal cr(x), requested per the appropriate NCS
+         message, and defined in the E package.  The MTA will derive
+         the cadence periods from the ring cadence table entry, as
+         provisioned by the customer.  The MTA is allowed to provide
+         appropriate default values for each of the ring cadences.
+         This table only needs to be supported when the MTA
+         implements the E package."
+    REFERENCE
+        "ETSI-TS-101-909-4 Specification"
+    ::= { pktcSigDevObjects 31 }
+
+pktcSigDevRingCadenceEntry    OBJECT-TYPE
+    SYNTAX       PktcSigDevRingCadenceEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " Each entry in this row corresponds to a ring cadence
+          that is being supported by the device.  The conceptual
+          rows MUST NOT persist across MTA reboots."
+    INDEX { pktcSigDevRingCadenceIndex }
+    ::= { pktcSigDevRingCadenceTable 1 }
+
+PktcSigDevRingCadenceEntry ::= SEQUENCE {
+        pktcSigDevRingCadenceIndex       Unsigned32,
+        pktcSigDevRingCadence            PktcRingCadence
+    }
+
+pktcSigDevRingCadenceIndex    OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " A unique value ranging from 0 to 127 that corresponds to the
+          value sent by the LE based on country-specific cadences,
+          one row per cadence cycle.  In any given system
+          implementation for a particular country, it is anticipated
+          that a small number of ring cadences will be in use.  Thus,
+          this table most likely will not be populated to its full
+          size."
+    ::= { pktcSigDevRingCadenceEntry 1 }
+
+pktcSigDevRingCadence    OBJECT-TYPE
+    SYNTAX       PktcRingCadence
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This is the Ring Cadence."
+    ::= { pktcSigDevRingCadenceEntry 2 }
+
+pktcSigDevToneTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF PktcSigDevToneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " The Tone Table defines the composition of tones and
+          various tone operations.
+
+          The definition of the tones callWaiting1 through
+          callWaiting4 in this table MUST only contain the
+          audible tone itself; the delay between tones or the value
+          of the tone repeat count are not applicable for the call
+          waiting tones.
+
+          The delay between tones or the repeat count is controlled
+          by the objects pktcSigEndPntConfigCallWaitingDelay and
+          pktcSigEndPntConfigCallWaitingMaxRep.  If the
+          pktcSigDevToneType is set to either of the values
+          callWaiting1, callWaiting2, callWaiting3, or callWaiting4,
+          then the value of the pktcSigDevToneWholeToneRepeatCount
+          object indicates that the particular frequency group is
+          applicable, as a repeatable part of the tone, based on the
+          value of the MIB object
+          pktcSigDevToneWholeToneRepeatCount.
+
+          The MTA MUST make sure that, after the provisioning
+          cycle, the table is fully populated (i.e., for each
+          possible index, an entry MUST be defined) using
+          reasonable defaults for each row that was not defined
+          by the provisioning information delivered via MTA
+          Configuration.
+
+          The frequency composition of each tone is defined by the
+          pktcSigDevMultiFreqToneTable.  For each tone type defined
+          in pktcSigDevToneTable, the MTA MUST populate at least
+          one entry in the pktcSigDevMultiFreqToneTable.
+
+          For each particular value of pktcSigDevToneType, the
+          pktcSigDevToneTable table can define non-repeating and
+          repeating groups of the frequencies defined by the
+          pktcSigDevMultiFreqToneTable, such that each group is
+          represented by the set of the consecutive rows
+          (frequency group) in the pktcSigDevMultiFreqToneTable.
+
+          Objects in this table do not persist across MTA reboots.
+          For tones with multiple frequencies refer to the MIB table
+          pktcSigDevMultiFreqToneTable."
+    REFERENCE
+        "PacketCable NCS Specification, ETSI-TS-101-909-4
+         Specification."
+    ::= { pktcSigDevObjects 32 }
+
+pktcSigDevToneEntry    OBJECT-TYPE
+    SYNTAX       PktcSigDevToneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " The different tone types that can be provisioned based on
+          country-specific needs.
+
+          Each entry contains the tone generation parameters for
+          a specific frequency group of the specific Tone Type.
+
+          The different parameters can be provisioned via MTA
+          configuration based on country specific needs.
+          An MTA MUST populate all entries of this table for each
+          tone type."
+    INDEX { pktcSigDevToneType, pktcSigDevToneFreqGroup }
+    ::= { pktcSigDevToneTable 1 }
+
+PktcSigDevToneEntry ::= SEQUENCE {
+    pktcSigDevToneType                      INTEGER,
+    pktcSigDevToneFreqGroup                 Unsigned32,
+    pktcSigDevToneFreqCounter               Unsigned32,
+    pktcSigDevToneWholeToneRepeatCount      Unsigned32,
+    pktcSigDevToneSteady                    TruthValue
+    }
+
+pktcSigDevToneType        OBJECT-TYPE
+    SYNTAX       INTEGER {
+                 busy(1),
+                 confirmation(2),
+                 dial(3),
+                 messageWaiting(4),
+                 offHookWarning(5),
+                 ringBack(6),
+                 reOrder(7),
+                 stutterdial(8),
+                 callWaiting1(9),
+                 callWaiting2(10),
+                 callWaiting3(11),
+                 callWaiting4(12),
+                 alertingSignal(13),
+                 specialDial(14),
+                 specialInfo(15),
+                 release(16),
+                 congestion(17),
+                 userDefined1(18),
+                 userDefined2(19),
+                 userDefined3(20),
+                 userDefined4(21)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "A unique value that will correspond to the different
+         tone types.  These tones can be provisioned based on
+         country-specific needs.  This object defines the type
+         of tone being accessed.
+
+         The alertingSignal, specialDial, specialInfo, release,
+         congestion, userDefined1, userDefined2, userDefined3,
+         and userDefined4 tone types are used in
+         the E line package."
+    ::= { pktcSigDevToneEntry 1 }
+
+pktcSigDevToneFreqGroup  OBJECT-TYPE
+       SYNTAX       Unsigned32(1..4)
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+           "This MIB object represents the Tone Sequence reference
+           of a multi-sequence tone."
+       ::={ pktcSigDevToneEntry 2}
+
+pktcSigDevToneFreqCounter OBJECT-TYPE
+       SYNTAX       Unsigned32(1..8)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "This MIB object represents the number of consecutive
+           multi-frequency tones for the particular tone type in
+           the multi-frequency table (pktcSigDevMultiFreqToneTable).
+
+           Such a sequence of the consecutive multi-frequency tones
+           forms the tone group for the particular tone type in the
+           pktcSigDevToneTable."
+       ::={ pktcSigDevToneEntry 3}
+
+pktcSigDevToneWholeToneRepeatCount      OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..5000)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "This is the repeat count, which signifies how many times
+         to repeat the entire on-off cadence sequence.  Setting this
+         object may result in a cadence duration longer or shorter
+         than the overall signal duration specified by the time out
+         (TO) object for a particular signal.  If the repeat count
+         results in a longer tone duration than the signal duration
+         specified by the TO, the tone duration defined by the
+         TO object for a particular signal always represents
+         the overall signal duration for a tone.  In this case, the
+         tone duration repeat count will not be fully exercised, and
+         the desired tone duration will be truncated per the TO
+         setting.  If the repeat count results in a shorter tone
+         duration than the signal duration specified by the TO, the
+         tone duration defined by the repeat count takes precedence
+         over the TO and will end the signal event.  In this case,
+         the TO represents a time not to be exceeded for the signal.
+         It is recommended to ensure proper telephony signaling so that
+         the TO duration setting should always be longer than the
+         desired repeat count-time duration."
+    ::={ pktcSigDevToneEntry 4 }
+
+pktcSigDevToneSteady    OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "This MIB object represents the steady tone status.  A value
+         of 'true(1)' indicates that the steady tone is applied, and
+         a value of 'false(2)' indicates otherwise.
+         Devices must play out the on-off cadence sequence for
+         the number of times indicated by the MIB object
+         'pktcSigDevToneWholeToneRepeatCount' prior to applying the
+         last tone steadily, indefinitely.  If the MIB table
+         'pktcSigDevToneTable' contains multiple rows with this
+         Object set to a value of 'true(1)', the steady tone is
+         applied to the last repeating frequency group of the tone.
+
+         Setting this MIB object may result in a tone duration that is
+         longer or shorter than the overall signal duration
+         specified by the time out (TO) MIB object for a particular
+         signal.  If the repeat count results in a longer tone
+         duration than the signal duration specified by the TO, the
+         tone duration defined by the TO object for a particular
+         signal always represents the overall signal duration for a
+         tone.  In this case, the tone duration repeat count will
+         not be fully exercised, and the desired tone duration will
+         be truncated per the TO setting.  If the repeat count
+         results in a shorter tone duration than the signal duration
+         specified by the TO, the tone duration defined by the
+         repeat count takes precedence over the TO and will end the
+         signal event.  In this case, the TO represents a time not to
+         be exceeded for the signal.
+
+         It is recommended to ensure proper telephony signaling that
+         The TO duration setting should always be longer than the
+         desired repeat count-time duration, plus the desired maximum
+         steady tone period."
+    ::={ pktcSigDevToneEntry 5 }
+
+   pktcSigDevMultiFreqToneTable    OBJECT-TYPE
+       SYNTAX       SEQUENCE OF PktcSigDevMultiFreqToneEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+           " This MIB table defines the characteristics of tones
+             with multiple frequencies.  The constraints imposed
+             on the tones by the MIB table pktcSigDevToneTable
+             need to be considered for MIB objects in this table
+             as well.
+
+             The MTA MUST populate the corresponding row(s)
+             of the pktcSigDevMultiFreqToneTable for each tone
+             defined in the pktcSigDevToneTable.
+
+             The contents of the table may be provisioned via
+             MTA configuration."
+       REFERENCE
+           "PacketCable NCS Specification, ETSI-TS-101-909-4
+            Specification."
+       ::= { pktcSigDevObjects 33 }
+
+   pktcSigDevMultiFreqToneEntry    OBJECT-TYPE
+       SYNTAX       PktcSigDevMultiFreqToneEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+           " The different tone types with multiple frequencies
+             that can be provisioned based on country-specific
+             needs."
+       INDEX {pktcSigDevToneType, pktcSigDevToneNumber}
+       ::= { pktcSigDevMultiFreqToneTable 1 }
+
+   PktcSigDevMultiFreqToneEntry ::= SEQUENCE {
+         pktcSigDevToneNumber                    Unsigned32,
+         pktcSigDevToneFirstFreqValue            Unsigned32,
+         pktcSigDevToneSecondFreqValue           Unsigned32,
+         pktcSigDevToneThirdFreqValue            Unsigned32,
+         pktcSigDevToneFourthFreqValue           Unsigned32,
+         pktcSigDevToneFreqMode                  INTEGER,
+         pktcSigDevToneFreqAmpModePrtg           Unsigned32,
+         pktcSigDevToneDbLevel                   TenthdBm,
+         pktcSigDevToneFreqOnDuration            Unsigned32,
+         pktcSigDevToneFreqOffDuration           Unsigned32,
+         pktcSigDevToneFreqRepeatCount           Unsigned32
+   }
+
+   pktcSigDevToneNumber OBJECT-TYPE
+       SYNTAX       Unsigned32(1..8)
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+          "This MIB object represents the frequency reference
+           of a multi-frequency tone."
+       ::={ pktcSigDevMultiFreqToneEntry 1}
+
+   pktcSigDevToneFirstFreqValue    OBJECT-TYPE
+       SYNTAX       Unsigned32(0..4000)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+         "This MIB object represents the value of the first
+          frequency of a tone type.  A value of zero implies
+          absence of the referenced frequency."
+       ::={ pktcSigDevMultiFreqToneEntry 2}
+
+   pktcSigDevToneSecondFreqValue    OBJECT-TYPE
+       SYNTAX       Unsigned32(0..4000)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+         "This MIB object represents the value of the second
+          frequency of a tone type.  A value of zero implies
+          absence of the referenced frequency."
+       ::={ pktcSigDevMultiFreqToneEntry 3}
+
+   pktcSigDevToneThirdFreqValue    OBJECT-TYPE
+       SYNTAX       Unsigned32(0..4000)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+         "This MIB object represents the value of the third
+          frequency of a tone type.  A value of zero implies
+          absence of the referenced frequency."
+       ::={ pktcSigDevMultiFreqToneEntry 4}
+
+   pktcSigDevToneFourthFreqValue    OBJECT-TYPE
+       SYNTAX       Unsigned32(0..4000)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+         "This MIB object represents the value of the fourth
+          frequency of a tone type.  A value of zero implies
+          absence of the referenced frequency."
+       ::={ pktcSigDevMultiFreqToneEntry 5}
+
+   pktcSigDevToneFreqMode OBJECT-TYPE
+       SYNTAX       INTEGER {
+                     firstModulatedBySecond(1),
+                     summation(2)
+
+                    }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+       "This MIB object provides directive on the
+        modulation or summation of the frequencies
+        involved in the tone.
+
+        It is to be noted that while summation can
+        be done without any constraint on the number
+        of frequencies, the modulation (amplitude)
+        holds good only when there are two frequencies
+        (first and second).
+
+        Thus:
+          - If the mode is set to a value of
+            'firstModulatedBySecond(1)', the first frequency
+            MUST be modulated by the second, and the remaining
+            frequencies (third and fourth) ignored.  The
+            percentage of amplitude modulation to be applied
+            is defined by the MIB object
+            pktcSigDevToneFreqAmpModePrtg.
+
+          - If the mode is set to a value of
+            'summation(2)', all the frequencies MUST be
+            summed without any modulation.
+       "
+       ::={ pktcSigDevMultiFreqToneEntry 6}
+
+  pktcSigDevToneFreqAmpModePrtg OBJECT-TYPE
+       SYNTAX       Unsigned32(0..100)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This MIB object represents the percentage of amplitude
+           modulation applied to the second frequency
+           when the MIB object pktcSigDevToneFreqMode is
+           set to a value of 'firstModulatedBySecond (1)'.
+
+           If the MIB object pktcSigDevToneFreqMode is set to
+           value of 'summation (2)', then this MIB object MUST be
+           ignored."
+       ::={ pktcSigDevMultiFreqToneEntry 7}
+
+  pktcSigDevToneDbLevel    OBJECT-TYPE
+      SYNTAX       TenthdBm (-250..-110)
+      UNITS        "1/10 of a dBm"
+      MAX-ACCESS   read-only
+      STATUS       current
+      DESCRIPTION
+          "This MIB object contains the decibel level for each
+           analog signal (tone) that is locally generated
+           (versus in-band supervisory tones) and sourced to
+           the a-b terminals (TE connection point).  Each tone
+           in itself may consist of multiple frequencies, as
+           defined by the MIB table pktcSigDevMultiFreqToneTable.
+
+           This MIB object reflects the desired level at
+           the Telco (POTS) a-b (T/R) terminals, including the
+           effect of any MTA receiver gain (loss).  This is required
+           so that locally generated tones are consistent with
+           remotely generated in-band tones at the a-b terminals,
+           consistent with user expectations.
+
+           This MIB object must be set for each tone.
+           When tones are formed by combining multi-frequencies,
+           the level of each frequency shall be set so as to result
+           in the tone level specified in this object at the a-b
+           (T/R) terminals.
+
+           The wide range of levels for this Object is required
+           to provide signal-generator levels across the wide
+           range of gains (losses) -- but does not imply the entire
+           range is to be achievable given the range of gains (losses)
+           in the MTA."
+    DEFVAL { -120 }
+    ::={ pktcSigDevMultiFreqToneEntry 8}
+
+   pktcSigDevToneFreqOnDuration OBJECT-TYPE
+       SYNTAX       Unsigned32(0..5000)
+       UNITS        "milliseconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This MIB object represents the duration for which the
+           frequency reference corresponding to the tone type
+           is turned on."
+       ::={ pktcSigDevMultiFreqToneEntry 9}
+
+   pktcSigDevToneFreqOffDuration OBJECT-TYPE
+       SYNTAX       Unsigned32(0..5000)
+       UNITS        "milliseconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "This MIB object represents the duration for which the
+
+           frequency reference corresponding to the tone type
+           is turned off."
+       ::={ pktcSigDevMultiFreqToneEntry 10}
+
+   pktcSigDevToneFreqRepeatCount OBJECT-TYPE
+       SYNTAX       Unsigned32(0..5000)
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+       "This MIB object indicates the number of times
+       to repeat the cadence cycle represented by the
+       on/off durations (refer to the MIB objects
+       pktcSigDevToneFreqOnDuration and
+       pktcSigDevToneFreqOffDuration).
+
+       Setting this object may result in a tone duration that is
+       longer or shorter than the overall signal duration
+       specified by the time out (TO) object for the
+       corresponding tone type.  If the value of this MIB
+       Object indicates a longer duration than that
+       specified by the TO, the latter overrules the former,
+       and the desired tone duration will be truncated according
+       to the TO.
+
+       However, if the repeat count results in a shorter
+       tone duration than the signal duration specified by
+       the TO, the tone duration defined by the repeat count
+       takes precedence over the TO and will end the signal
+       event.  In this case, the TO represents a time not to
+       be exceeded for the signal.  It is recommended, to
+       ensure proper telephony signaling, that the TO
+       duration setting should always be longer than the
+       desired repeat count-time duration.  A value of zero
+       means the tone sequence is to be played once but not
+       repeated."
+       ::={ pktcSigDevMultiFreqToneEntry 11}
+
+   pktcSigDevCidDelayAfterLR  OBJECT-TYPE
+       SYNTAX       Unsigned32 (300..800)
+       UNITS        "Milliseconds"
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object specifies the delay between the end of the
+            Line Reversal and the start of the FSK or DTMF signal.
+            This MIB object is used only when pktcSigDevCidMode is
+            set to a value of 'lrETS'.  This timing has a range of
+            300 to 800 ms.
+
+            The following table defines the default values
+            for this MIB object, depending on the signal type
+           (pktcSigDevCidMode), and MUST be followed:
+
+          Value of pktcSigDevCidMode       Default value
+
+            duringringingETS               any value  (not used)
+            dtAsETS                        any value  (not used)
+            rpAsETS                        any value  (not used)
+            lrAsETS                        any value  (not used)
+            lrETS                          400
+
+            An attempt to set this object while the value of
+            pktcSigDevCidMode is not set to a value of 'lrETS' will
+            result in an 'inconsistentValue' error.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+       DEFVAL { 400 }
+       ::= {pktcSigDevObjects 34 }
+
+   pktcSigDevCidDtmfStartCode OBJECT-TYPE
+       SYNTAX       DtmfCode
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object identifies optional start codes used when
+            the MIB object pktcSigDevCidSigProtocol is set
+            to a value of 'dtmf(2)'.
+
+            Different countries define different caller id signaling
+            codes to support caller identification.  When Dual-Tone
+            Multi-Frequency (DTMF) is used, the caller id digits are
+            preceded by a 'start code' digit, followed by the digit
+            transmission sequence <S1>...<Sn> (where Sx represents
+            the digits 0-9), and terminated by the 'end code' digit.
+
+            For example,
+              <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+            The start code for calling number delivery may be DTMF
+            'A' or 'D'.  The start code for redirecting a number may be
+            DTMF 'D'.  The DTMF code 'B' may be sent by the network
+            as a start code for the transfer of information values,
+            through which special events can be indicated to the
+            user.  In some countries, the '*' or '#' may be used
+            instead of 'A', 'B', 'C', or 'D'.
+
+            The value of this MIB object MUST NOT persist across MTA
+
+            reboots."
+       REFERENCE
+            "ETSI-EN-300-659-1 specification"
+       DEFVAL {dtmfcodeA}
+   ::= { pktcSigDevObjects 35 }
+
+   pktcSigDevCidDtmfEndCode OBJECT-TYPE
+       SYNTAX       DtmfCode
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object identifies optional end codes used when the
+            pktcSigDevCidSigProtocol is set to a value of
+            'dtmf(2)'.
+
+            Different countries define different caller id signaling
+            protocols to support caller identification.  When
+            Dual-Tone Multi-Frequency (DTMF) is used, the caller id
+            digits are preceded by a 'start code' digit, followed by
+            the digit transmission sequence <S1>...<Sn> (where Sx
+            represents the digits 0-9), and terminated by the 'end
+            code' digit.
+
+            For example,
+              <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+
+            The DTMF code 'C' may be sent by the network as an
+            end code for the transfer of information values, through
+            which special events can be indicated to the user.  In
+            some countries, the '*' or '#' may be used instead of
+            'A', 'B', 'C', or 'D'.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+       REFERENCE
+            "ETSI-EN-300-659-1 specification"
+       DEFVAL {dtmfcodeC}
+   ::= { pktcSigDevObjects 36 }
+
+   pktcSigDevVmwiSigProtocol  OBJECT-TYPE
+       SYNTAX       PktcSubscriberSideSigProtocol
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object identifies the subscriber line protocol used
+            for signaling the information on Visual Message Waiting
+            Indicator (VMWI).  Different countries define different
+            VMWI signaling protocols to support VMWI service.
+
+            Frequency shift keying (FSK) is most commonly used.
+            DTMF is an alternative.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+        DEFVAL { fsk }
+   ::= { pktcSigDevObjects 37 }
+
+   pktcSigDevVmwiDelayAfterLR    OBJECT-TYPE
+       SYNTAX       Unsigned32 (0|300..800)
+       UNITS        "Milliseconds"
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object specifies the delay between the end of the
+            Line Reversal and the start of the FSK or DTMF signal.
+            This object is only used when pktcSigDevVmwiMode is
+            set to a value of 'lrETS'.
+            This timing has a range of 300 to 800 ms.
+
+            The following table defines the default values
+            for this MIB object, depending on the signal type
+           (pktcSigDevVmwiMode), and MUST be followed:
+
+            Value of pktcSigDevVmwiMode       Default value
+
+            duringringingETS                  any value  (not used)
+            dtAsETS                           any value  (not used)
+            rpAsETS                           any value  (not used)
+            lrAsETS                           any value  (not used)
+            lrETS                             400
+
+            An attempt to set this object while the value of
+            pktcSigDevVmwiMode is not 'lrETS' will result in an
+            'inconsistentValue' error.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+       DEFVAL {400}
+           ::= {pktcSigDevObjects 38 }
+
+   pktcSigDevVmwiDtmfStartCode OBJECT-TYPE
+       SYNTAX       DtmfCode
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object identifies optional start codes used when
+
+            the pktcSigDevVmwiSigProtocol is set to a value of
+            'dtmf(2)'.  Different countries define different On Hook
+            Data Transmission Protocol signaling codes to support
+            VMWI.
+
+            When Dual-Tone Multi-Frequency (DTMF) is used, the VMWI
+            digits are preceded by a 'start code' digit, followed
+            by the digit transmission sequence <S1>...<Sn> (where
+            Sx represents the digits 0-9), and terminated by the 'end
+            code' digit.
+
+            For example,
+              <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+
+            The start code for redirecting VMWI may be DTMF 'D'
+            The DTMF code 'B' may be sent by the network as a start
+            code for the transfer of information values, through
+            which special events can be indicated to the user.  In
+            some countries, the '*' or '#' may be used instead of
+            'A', 'B', 'C', or 'D'.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+       REFERENCE
+            "ETSI-EN-300-659-1 specification"
+       DEFVAL {dtmfcodeA}
+   ::= { pktcSigDevObjects 39 }
+
+   pktcSigDevVmwiDtmfEndCode OBJECT-TYPE
+       SYNTAX       DtmfCode
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           "This object identifies an optional end code used when the
+            pktcSigDevVmwiSigProtocol is set to a value of
+            'dtmf(2)'.  Different countries define different on-hook
+            Data Transmission Protocol signaling codes to support
+            VMWI.
+
+            When Dual-Tone Multi-Frequency (DTMF) is used, the VMWI
+            digits are preceded by a 'start code' digit, followed
+            by the digit transmission sequence <S1>...<Sn> (where
+            Sx represents the digits 0-9), and terminated by the 'end
+            code' digit.
+
+            For example,
+              <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+
+            The DTMF code 'C' may be sent by the network as an end code
+            for the transfer of information values, through which
+            special events can be indicated to the user.  In some
+            countries, the '*' or '#' may be used instead of 'A',
+            'B', 'C', or 'D'.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+       REFERENCE
+            "ETSI-EN-300-659-1 specification"
+       DEFVAL {dtmfcodeC}
+   ::= { pktcSigDevObjects 40 }
+
+pktcSigDevrpAsDtsDuration     OBJECT-TYPE
+       SYNTAX       Unsigned32 (0|200..500)
+       UNITS        "Milliseconds"
+       MAX-ACCESS   read-write
+       STATUS       current
+       DESCRIPTION
+           " This object specifies the duration of the rpASDTS ring
+             pulse prior to the start of the transmission of the
+             FSK or DTMF containing the caller id information.  It is
+             only used when pktcSigDevCidMode is set to a value of
+             'rpAsETS'.
+
+             The following table defines the default values
+             for this MIB object, depending on the signal type
+            (pktcSigDevCidMode), and MUST be followed:
+
+             Value of pktcSigDevCidMode       Default value
+
+             duringringingETS                 any value  (not used)
+             dtAsETS                          any value  (not used)
+             rpAsETS                          250
+             lrAsETS                          any value  (not used)
+             lrETS                            any value  (not used)
+
+             An attempt to set this object while the value of
+             pktcSigDevCidMode is not 'rpAsETS' will result in
+             an 'inconsistentValue' error.
+
+            The value of this MIB object MUST NOT persist across MTA
+            reboots."
+       REFERENCE
+           "ETSI-EN-300-659-1 Specification and Belgacom
+            BGC_D_48_9811_30_09_EDOC version 3.3"
+       DEFVAL { 250 }
+       ::= {pktcSigDevObjects 41 }
+
+--
+-- The Endpoint Config Table is used to define attributes that
+-- are specific to connection EndPoints.
+--
+
+pktcSigEndPntConfigTable  OBJECT-TYPE
+    SYNTAX        SEQUENCE OF PktcSigEndPntConfigEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        " This table describes the information pertaining to each
+          endpoint of the MTA.  All entries in this table represent
+          the provisioned endpoints provisioned with the information
+          required by the MTA to maintain the NCS protocol
+          communication with the CMS.  Each endpoint can be assigned
+          to its own CMS.  If the specific endpoint does not have
+          the corresponding CMS information in this table, the
+          endpoint is considered as not provisioned with voice
+          services.  Objects in this table do not persist across
+          MTA reboots."
+   ::=  { pktcSigEndPntConfigObjects 1 }
+
+pktcSigEndPntConfigEntry  OBJECT-TYPE
+    SYNTAX        PktcSigEndPntConfigEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "Each entry in the pktcSigEndPntConfigTable represents
+         required signaling parameters for the specific endpoint
+         provisioned with voice services.  The conceptual rows MUST
+         NOT persist across MTA reboots."
+    INDEX { ifIndex }
+    ::= { pktcSigEndPntConfigTable 1 }
+
+PktcSigEndPntConfigEntry  ::= SEQUENCE {
+    pktcSigEndPntConfigCallAgentId             SnmpAdminString,
+    pktcSigEndPntConfigCallAgentUdpPort        InetPortNumber,
+    pktcSigEndPntConfigPartialDialTO           Unsigned32,
+    pktcSigEndPntConfigCriticalDialTO          Unsigned32,
+    pktcSigEndPntConfigBusyToneTO              Unsigned32,
+    pktcSigEndPntConfigDialToneTO              Unsigned32,
+    pktcSigEndPntConfigMessageWaitingTO        Unsigned32,
+    pktcSigEndPntConfigOffHookWarnToneTO       Unsigned32,
+    pktcSigEndPntConfigRingingTO               Unsigned32,
+    pktcSigEndPntConfigRingBackTO              Unsigned32,
+    pktcSigEndPntConfigReorderToneTO           Unsigned32,
+    pktcSigEndPntConfigStutterDialToneTO       Unsigned32,
+    pktcSigEndPntConfigTSMax                   Unsigned32,
+    pktcSigEndPntConfigMax1                    Unsigned32,
+    pktcSigEndPntConfigMax2                    Unsigned32,
+    pktcSigEndPntConfigMax1QEnable             TruthValue,
+    pktcSigEndPntConfigMax2QEnable             TruthValue,
+    pktcSigEndPntConfigMWD                     Unsigned32,
+    pktcSigEndPntConfigTdinit                  Unsigned32,
+    pktcSigEndPntConfigTdmin                   Unsigned32,
+    pktcSigEndPntConfigTdmax                   Unsigned32,
+    pktcSigEndPntConfigRtoMax                  Unsigned32,
+    pktcSigEndPntConfigRtoInit                 Unsigned32,
+    pktcSigEndPntConfigLongDurationKeepAlive   Unsigned32,
+    pktcSigEndPntConfigThist                   Unsigned32,
+    pktcSigEndPntConfigStatus                  RowStatus,
+    pktcSigEndPntConfigCallWaitingMaxRep       Unsigned32,
+    pktcSigEndPntConfigCallWaitingDelay        Unsigned32,
+    pktcSigEndPntStatusCallIpAddressType       InetAddressType,
+    pktcSigEndPntStatusCallIpAddress           InetAddress,
+    pktcSigEndPntStatusError                   INTEGER,
+    pktcSigEndPntConfigMinHookFlash            Unsigned32,
+    pktcSigEndPntConfigMaxHookFlash            Unsigned32,
+    pktcSigEndPntConfigPulseDialInterdigitTime Unsigned32,
+    pktcSigEndPntConfigPulseDialMinMakeTime    Unsigned32,
+    pktcSigEndPntConfigPulseDialMaxMakeTime    Unsigned32,
+    pktcSigEndPntConfigPulseDialMinBreakTime   Unsigned32,
+    pktcSigEndPntConfigPulseDialMaxBreakTime   Unsigned32
+    }
+
+pktcSigEndPntConfigCallAgentId     OBJECT-TYPE
+    SYNTAX      SnmpAdminString(SIZE (3..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains a string indicating the call agent
+          name (e.g., ca@example.com).  The call agent name, after
+          the character '@', MUST be a fully qualified domain name
+          (FQDN) and MUST have a corresponding pktcMtaDevCmsFqdn
+          entry in the pktcMtaDevCmsTable.  The object
+          pktcMtaDevCmsFqdn is defined in the PacketCable MIBMTA
+          Specification.  For each particular endpoint, the MTA MUST
+          use the current value of this object to communicate with
+          the corresponding CMS.  The MTA MUST update this object
+          with the value of the 'Notified Entity' parameter of the
+          NCS message.  Because of the high importance of this object
+          to the ability of the MTA to maintain reliable NCS
+          communication with the CMS, it is highly recommended not
+          to change this object's value using SNMP during normal
+          operation."
+    ::= {  pktcSigEndPntConfigEntry 1 }
+
+pktcSigEndPntConfigCallAgentUdpPort    OBJECT-TYPE
+    SYNTAX      InetPortNumber (1025..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the current value of the User
+          Datagram Protocol (UDP) receive port on which the
+          call agent will receive NCS from the endpoint.
+          For each particular endpoint, the MTA MUST use the current
+          value of this object to communicate with the corresponding
+          CMS.  The MTA MUST update this object with the value of the
+          'Notified Entity' parameter of the NCS message.  If the
+          Notified Entity parameter does not contain a CallAgent
+          port, the MTA MUST update this object with the default
+          value of 2727.  Because of the high importance of this
+          object to the ability of the MTA to maintain reliable NCS
+          communication with the CMS, it is highly recommended not
+          to change this object's value using SNMP during normal
+          operation."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 2727 }
+    ::= { pktcSigEndPntConfigEntry 2 }
+
+pktcSigEndPntConfigPartialDialTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object contains the value of the partial dial
+         time out.
+         The time out (TO) elements are intended to limit the time a
+         tone or frequency is generated.  When this MIB object is set
+         to a value of '0', the MTA MUST NOT generate the
+         corresponding frequency or tone, regardless of the
+         definitions pertaining to frequency, tone duration, or
+         cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 16 }
+    ::= { pktcSigEndPntConfigEntry 3 }
+
+pktcSigEndPntConfigCriticalDialTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object contains the value of the critical
+         dial time out.
+         The time out (TO) elements are intended to limit the time a
+         tone or frequency is generated.  When this MIB object is set
+         to a value of '0', the MTA MUST NOT generate the
+         corresponding frequency or tone, regardless of the
+         definitions pertaining to frequency, tone duration, or
+         cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 4 }
+    ::= { pktcSigEndPntConfigEntry 4 }
+
+pktcSigEndPntConfigBusyToneTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for busy
+          tone.  The MTA MUST NOT update this object with the
+          value provided in the NCS message (if present).  If
+          the value of the object is modified by the SNMP Management
+          Station, the MTA MUST use the new value as a default only
+          for a new signal requested by the NCS message.
+          The time out (TO) elements are intended to limit the time
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 30 }
+    ::= { pktcSigEndPntConfigEntry 5 }
+
+pktcSigEndPntConfigDialToneTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for dial
+          tone.  The MTA MUST NOT update this object with the
+          value provided in the NCS message (if present).  If
+
+          the value of the object is modified by the SNMP Management
+          Station, the MTA MUST use the new value as a default only
+          for a new signal requested by the NCS message.
+          The time out (TO) elements are intended to limit the time
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 16 }
+    ::= { pktcSigEndPntConfigEntry 6 }
+
+pktcSigEndPntConfigMessageWaitingTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for message
+          waiting indicator.  The MTA MUST NOT update this object
+          with the value provided in the NCS message (if
+          present).  If the value of the object is modified by the
+          SNMP Manager application, the MTA MUST use the new value
+          as a default only for a new signal requested by the NCS
+          message.
+          The time out (TO) elements are intended to limit the time
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 16 }
+    ::= { pktcSigEndPntConfigEntry 7 }
+
+pktcSigEndPntConfigOffHookWarnToneTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for the
+          off-hook warning tone.  The MTA MUST NOT update this object
+          with the value provided in the NCS message (if present).  If
+          the value of the object is modified by the SNMP Manager
+
+          application, the MTA MUST use the new value as a default
+          only for a new signal requested by the NCS message.  The
+          time out (TO) elements are intended to limit the time a tone
+          or frequency is generated.  When this MIB object is set to a
+          value of '0', the MTA MUST NOT generate the corresponding
+          frequency or tone, regardless of the definitions pertaining
+          to frequency, tone duration, or cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 0 }
+    ::= { pktcSigEndPntConfigEntry 8 }
+
+pktcSigEndPntConfigRingingTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for
+          ringing.  The MTA MUST NOT update this object with the
+          value provided in the NCS message (if present).  If
+          the value of the object is modified by the SNMP Management
+          Station, the MTA MUST use the new value as a default only
+          for a new signal requested by the NCS message.
+          The time out (TO) elements are intended to limit the time
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 180 }
+    ::= { pktcSigEndPntConfigEntry 9 }
+
+pktcSigEndPntConfigRingBackTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for ring
+          back.  The MTA MUST NOT update this object with the
+          value provided in the NCS message (if present).  If
+          the value of the object is modified by the SNMP Management
+          Station, the MTA MUST use the new value as a default only
+          for a new signal requested by the NCS message.
+          The time out (TO) elements are intended to limit the time
+
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 180 }
+    ::= { pktcSigEndPntConfigEntry 10 }
+
+pktcSigEndPntConfigReorderToneTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for reorder
+          tone.  The MTA MUST NOT update this object with the
+          value provided in the NCS message (if present).  If
+          the value of the object is modified by the SNMP Management
+          Station, the MTA MUST use the new value as a default only
+          for a new signal requested by the NCS message.
+          The time out (TO) elements are intended to limit the time
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL    { 30 }
+    ::= { pktcSigEndPntConfigEntry 11 }
+
+pktcSigEndPntConfigStutterDialToneTO     OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the default time out value for stutter
+          dial tone.  The MTA MUST NOT update this object with the
+          value provided in the NCS message (if present).  If
+          the value of the object is modified by the SNMP Management
+          Station, the MTA MUST use the new value as a default only
+          for a new signal requested by the NCS message.
+          The time out (TO) elements are intended to limit the time
+          a tone or frequency is generated.  When this MIB object is
+          set to a value of '0', the MTA MUST NOT generate the
+
+          corresponding frequency or tone, regardless of the
+          definitions pertaining to frequency, tone duration, or
+          cadence."
+    REFERENCE
+          "PacketCable NCS Specification"
+    DEFVAL    { 16 }
+    ::= { pktcSigEndPntConfigEntry 12 }
+
+pktcSigEndPntConfigTSMax     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "This MIB object is used as part of an NCS
+            retransmission algorithm.  Prior to any retransmission,
+            the MTA must check to make sure that the time elapsed
+            since the sending of the initial datagram does not
+            exceed the value specified by this MIB object.  If more
+            than Tsmax time has elapsed, then the retransmissions
+            MUST cease.
+
+            Refer to the MIB object pktcSigEndPntConfigThist for
+            information on when the endpoint becomes disconnected."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 20 }
+    ::= { pktcSigEndPntConfigEntry 13 }
+
+pktcSigEndPntConfigMax1     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains the suspicious error threshold for
+         signaling messages.  The pktcSigEndPntConfigMax1 object
+         indicates the retransmission threshold at which the MTA MAY
+         actively query the domain name server (DNS) in order to
+         detect the possible change of call agent interfaces."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 5 }
+    ::= { pktcSigEndPntConfigEntry 14 }
+
+pktcSigEndPntConfigMax2     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains the disconnect error threshold for
+         signaling messages.  The pktcSigEndPntConfigMax2 object
+         indicates the retransmission threshold at which the MTA
+         SHOULD contact the DNS one more time to see if any other
+         interfaces to the call agent have become available."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 7 }
+    ::= { pktcSigEndPntConfigEntry 15 }
+
+pktcSigEndPntConfigMax1QEnable     OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object enables/disables the Max1 domain name server
+         (DNS) query operation when the pktcSigEndPntConfigMax1
+         threshold has been reached.
+         A value of true(1) indicates enabling, and a value of
+         false(2) indicates disabling."
+    DEFVAL { true }
+    ::= { pktcSigEndPntConfigEntry 16 }
+
+pktcSigEndPntConfigMax2QEnable     OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object enables/disables the Max2 domain name server
+         (DNS) query operation when the pktcSigEndPntConfigMax2
+         threshold has been reached.
+         A value of true(1) indicates enabling, and a value of
+         false(2) indicates disabling."
+    DEFVAL { true }
+    ::= { pktcSigEndPntConfigEntry 17 }
+
+pktcSigEndPntConfigMWD     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Maximum Waiting Delay (MWD) contains the maximum number of
+         seconds an MTA waits, after powering on, before initiating
+         the restart procedure with the call agent."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 600 }
+    ::= { pktcSigEndPntConfigEntry 18 }
+
+pktcSigEndPntConfigTdinit     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This MIB object represents the 'disconnected' initial
+         waiting delay within the context of an MTA's 'disconnected
+         procedure'.  The 'disconnected procedure' is initiated when
+         an endpoint becomes 'disconnected' while attempting to
+         communicate with a call agent.
+
+         The 'disconnected timer' associated with the 'disconnected
+         Procedure' is initialized to a random value, uniformly
+         distributed between zero and the value contained in this
+         MIB object.
+
+         For more information on the usage of this timer, please
+         refer to the PacketCable NCS Specification."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 15 }
+    ::= { pktcSigEndPntConfigEntry 19 }
+
+pktcSigEndPntConfigTdmin     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This MIB object represents the 'disconnected' minimum
+             waiting delay within the context of an MTA's
+             'disconnected procedure', specifically when local user
+             activity is detected.
+             The 'disconnected procedure' is initiated when
+             an endpoint becomes 'disconnected' while attempting to
+             communicate with a call agent.
+             For more information on the usage of this timer, please
+             refer to the PacketCable NCS Specification."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 15 }
+    ::= { pktcSigEndPntConfigEntry 20 }
+
+pktcSigEndPntConfigTdmax     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the maximum number of seconds the MTA
+          waits, after a disconnect, before initiating the
+          disconnected procedure with the call agent.
+           "
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 600 }
+    ::= { pktcSigEndPntConfigEntry 21 }
+
+pktcSigEndPntConfigRtoMax     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the maximum number of seconds the MTA
+         waits for a response to an NCS message before initiating
+         a retransmission."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 4 }
+    ::= { pktcSigEndPntConfigEntry 22 }
+
+pktcSigEndPntConfigRtoInit     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the initial number of seconds for the
+          retransmission timer."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 200 }
+    ::= { pktcSigEndPntConfigEntry 23 }
+
+pktcSigEndPntConfigLongDurationKeepAlive     OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "minutes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " Specifies a time out value, in minutes, for sending long
+          duration call notification messages."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 60 }
+    ::= { pktcSigEndPntConfigEntry 24 }
+
+pktcSigEndPntConfigThist  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " Time out period, in seconds, before no response is declared."
+    REFERENCE
+        "PacketCable NCS Specification"
+    DEFVAL { 30 }
+    ::= { pktcSigEndPntConfigEntry 25 }
+
+pktcSigEndPntConfigStatus     OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the Row Status associated with the
+          pktcSigEndPntConfigTable.  There are no restrictions or
+          dependencies amidst the columnar objects before this
+          row can be activated or for modifications of the
+          columnar objects when this object is set to a
+          value of 'active(1)."
+    ::= { pktcSigEndPntConfigEntry 26 }
+
+pktcSigEndPntConfigCallWaitingMaxRep     OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        " This object contains the default value of the maximum
+          number of repetitions of the Call Waiting tone that the
+          MTA will play from a single CMS request.  The MTA MUST NOT
+          update this object with the information provided in the
+          NCS message (if present).  If the value of the object is
+          modified by the SNMP Manager application, the MTA MUST use
+          the new value as a default only for a new signal
+          requested by the NCS message."
+    DEFVAL    { 1 }
+    ::= { pktcSigEndPntConfigEntry 27 }
+
+pktcSigEndPntConfigCallWaitingDelay     OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..100)
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        " This object contains the delay between repetitions of the
+          Call Waiting tone that the MTA will play from a single CMS
+          request."
+    DEFVAL    { 10 }
+    ::= { pktcSigEndPntConfigEntry 28 }
+
+pktcSigEndPntStatusCallIpAddressType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       " This object contains the type of Internet address contained
+         in the MIB object 'pktcSigEndPntStatusCallIpAddress'.
+
+         Since pktcSigEndPntStatusCallIpAddress is expected to
+         contain an IP address, a value of dns(16) is disallowed."
+    ::= { pktcSigEndPntConfigEntry 29 }
+
+pktcSigEndPntStatusCallIpAddress  OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       " This MIB object contains the chosen IP address of the CMS
+         currently being used for the corresponding endpoint.
+
+         The device determines the IP address by using DNS to
+         resolve the IP address of the CMS from the FQDN stored in
+         the MIB object 'pktcSigEndPntConfigCallAgentId'.  The
+         processes are outlined in the PacketCable NCS and Security
+         specifications, and MUST be followed by the MTA.
+
+         The IP address type contained in this MIB object is
+         indicated by pktcSigEndPntStatusCallIpAddressType."
+    REFERENCE
+        "PacketCable NCS Specification;
+         PacketCable Security specification, [PKT-SP-SEC]."
+::= { pktcSigEndPntConfigEntry 30 }
+
+pktcSigEndPntStatusError  OBJECT-TYPE
+    SYNTAX INTEGER {
+               operational (1),
+               noSecurityAssociation (2),
+               disconnected (3)
+             }
+    MAX-ACCESS   read-only
+    STATUS  current
+    DESCRIPTION
+       " This object contains the error status for this interface.
+         The operational status indicates that all operations
+         necessary to put the line in service have occurred, and the
+         CMS has acknowledged the Restart In Progress (RSIP)
+         message successfully.  If pktcMtaDevCmsIpsecCtrl is enabled
+         for the associated call agent, the noSecurityAssociation
+         status indicates that no Security Association (SA) yet
+         exists for this endpoint.  If pktcMtaDevCmsIpsecCtrl is
+         disabled for the associated call agent, the
+         noSecurityAssociation status is not applicable and should
+         not be used by the MTA.  The disconnected status indicates
+         one of the following two:
+         If pktcMtaDevCmsIpsecCtrl is disabled, then no security
+         association is involved with this endpoint.  The NCS
+         signaling software is in process of establishing the NCS
+         signaling link via an RSIP exchange.
+         Otherwise, when pktcMtaDevCmsIpsecCtrl is enabled,
+         security Association has been established, and the NCS
+         signaling software is in process of establishing the NCS
+         signaling link via an RSIP exchange."
+    ::= { pktcSigEndPntConfigEntry 31 }
+
+pktcSigEndPntConfigMinHookFlash    OBJECT-TYPE
+    SYNTAX       Unsigned32 (20..1550)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the minimum time a line needs to be on-hook for a
+          valid hook flash.  The value of this object MUST be
+          greater than the value of
+          pktcSigEndPntConfigPulseDialMaxBreakTime.  The value of
+          pktcSigEndPntConfigMinHookFlash MUST be less than
+          pktcSigEndPntConfigMaxHookFlash.  This object MUST only be
+          set via the MTA configuration during the provisioning
+          process.
+             Furthermore, given the possibility for the 'pulse dial'
+             and 'hook flash' to overlap, the value of this object
+             MUST be greater than the value contained by the MIB
+             Object 'pktcSigEndPntConfigPulseDialMaxMakeTime'."
+    DEFVAL { 300 }
+    ::= { pktcSigEndPntConfigEntry 32 }
+
+pktcSigEndPntConfigMaxHookFlash    OBJECT-TYPE
+    SYNTAX       Unsigned32 (20..1550)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the maximum time a line needs to be on-hook for a
+          valid hook flash.  The value of
+          pktcSigEndPntConfigMaxHookFlash MUST be greater than
+          pktcSigEndPntConfigMinHookFlash.  This object MUST only be
+          set via the MTA configuration during the provisioning
+          process."
+    DEFVAL { 800 }
+    ::= { pktcSigEndPntConfigEntry 33 }
+
+pktcSigEndPntConfigPulseDialInterdigitTime    OBJECT-TYPE
+    SYNTAX       Unsigned32 (100..1500)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the pulse dial inter-digit time out.  This object
+          MUST only be set via the MTA configuration during the
+          provisioning process."
+    DEFVAL { 100 }
+    ::= { pktcSigEndPntConfigEntry 34 }
+
+pktcSigEndPntConfigPulseDialMinMakeTime    OBJECT-TYPE
+    SYNTAX       Unsigned32 (20..200)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the minimum make pulse width for the dial pulse.
+          The value of pktcSigEndPntConfigPulseDialMinMakeTime MUST
+          be less than pktcSigEndPntConfigPulseDialMaxMakeTime.  This
+          object MUST only be set via the MTA configuration during
+          the provisioning process."
+    DEFVAL { 25 }
+    ::= { pktcSigEndPntConfigEntry 35 }
+
+pktcSigEndPntConfigPulseDialMaxMakeTime    OBJECT-TYPE
+    SYNTAX       Unsigned32 (20..200)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the maximum make pulse width for the dial pulse.
+
+          The value of pktcSigEndPntConfigPulseDialMaxMakeTime MUST
+          be greater than pktcSigEndPntConfigPulseDialMinMakeTime.
+          This object MUST only be provided via the configuration
+          file during the provisioning process.
+          Furthermore, given the possibility for the 'pulse dial'
+          and 'hook flash' to overlap, the value of this object MUST
+          be less than the value contained by the MIB object
+          pktcSigEndPntConfigMinHookFlash."
+    DEFVAL { 55 }
+    ::= { pktcSigEndPntConfigEntry 36 }
+
+pktcSigEndPntConfigPulseDialMinBreakTime    OBJECT-TYPE
+    SYNTAX       Unsigned32 (20..200)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the minimum break pulse width for the dial pulse.
+          The value of pktcSigEndPntConfigPulseDialMinBreakTime MUST
+          be less than pktcSigEndPntConfigPulseDialMaxBreakTime.
+          This object must only be provided via the configuration
+          file during the provisioning process."
+    DEFVAL { 45 }
+    ::= { pktcSigEndPntConfigEntry 37 }
+
+pktcSigEndPntConfigPulseDialMaxBreakTime    OBJECT-TYPE
+    SYNTAX       Unsigned32 (20..200)
+    UNITS        "Milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        " This is the maximum break pulse width for the dial pulse.
+          The value of pktcSigEndPntConfigPulseDialMaxBreakTime MUST
+          be greater than pktcSigEndPntConfigPulseDialMinBreakTime.
+          This object MUST only be provided via the configuration
+          file during the provisioning process."
+    DEFVAL { 75 }
+    ::= { pktcSigEndPntConfigEntry 38 }
+
+--
+-- notification group is for future extension.
+--
+pktcSigNotification  OBJECT IDENTIFIER ::= { pktcIetfSigMib 0 }
+pktcSigConformance   OBJECT IDENTIFIER ::= { pktcIetfSigMib 2 }
+pktcSigCompliances   OBJECT IDENTIFIER ::= { pktcSigConformance 1 }
+pktcSigGroups        OBJECT IDENTIFIER ::= { pktcSigConformance 2 }
+
+--
+
+-- compliance statements
+--
+
+pktcSigBasicCompliance  MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+        " The compliance statement for MTAs that implement
+          NCS signaling."
+
+MODULE  -- pktcIetfSigMib
+
+---
+-- Unconditionally mandatory groups for all MTAs
+---
+
+MANDATORY-GROUPS {
+    pktcSigDeviceGroup,
+    pktcSigEndpointGroup
+}
+---
+-- Conditionally mandatory groups for MTAs
+---
+
+GROUP pktcInternationalGroup
+    DESCRIPTION
+        " This group is mandatory only for MTAs implementing
+          international telephony features."
+
+GROUP pktcLLinePackageGroup
+    DESCRIPTION
+        " This group is mandatory only for MTAs implementing the L
+          line package."
+
+GROUP pktcELinePackageGroup
+    DESCRIPTION
+        " This group is mandatory only for MTAs implementing the E
+          Line Package."
+    ::={ pktcSigCompliances 1 }
+
+pktcSigDeviceGroup  OBJECT-GROUP
+    OBJECTS {
+    pktcSigDevCodecMax,
+    pktcSigDevEchoCancellation,
+    pktcSigDevSilenceSuppression,
+    pktcSigDevR0Cadence,
+    pktcSigDevR1Cadence,
+    pktcSigDevR2Cadence,
+    pktcSigDevR3Cadence,
+    pktcSigDevR4Cadence,
+    pktcSigDevR5Cadence,
+    pktcSigDevR6Cadence,
+    pktcSigDevR7Cadence,
+    pktcSigDevRgCadence,
+    pktcSigDevRsCadence,
+    pktcSigDefCallSigDscp,
+    pktcSigDefMediaStreamDscp,
+    pktcSigDevVmwiMode,
+    pktcSigCapabilityType,
+    pktcSigCapabilityVersion,
+    pktcSigCapabilityVendorExt,
+    pktcSigDefNcsReceiveUdpPort
+    }
+    STATUS current
+    DESCRIPTION
+          "Group of MIB objects containing signaling configuration
+           information that is applicable per-device."
+    ::= { pktcSigGroups 1 }
+
+pktcSigEndpointGroup  OBJECT-GROUP
+    OBJECTS {
+    pktcSigEndPntConfigCallAgentId,
+    pktcSigEndPntConfigCallAgentUdpPort,
+    pktcSigEndPntConfigPartialDialTO,
+    pktcSigEndPntConfigCriticalDialTO,
+    pktcSigEndPntConfigBusyToneTO,
+    pktcSigEndPntConfigDialToneTO,
+    pktcSigEndPntConfigMessageWaitingTO,
+    pktcSigEndPntConfigOffHookWarnToneTO,
+    pktcSigEndPntConfigRingingTO,
+    pktcSigEndPntConfigRingBackTO,
+    pktcSigEndPntConfigReorderToneTO,
+    pktcSigEndPntConfigStutterDialToneTO,
+    pktcSigEndPntConfigTSMax,
+    pktcSigEndPntConfigMax1,
+    pktcSigEndPntConfigMax2,
+    pktcSigEndPntConfigMax1QEnable,
+    pktcSigEndPntConfigMax2QEnable,
+    pktcSigEndPntConfigMWD,
+    pktcSigEndPntConfigTdinit,
+    pktcSigEndPntConfigTdmin,
+    pktcSigEndPntConfigTdmax,
+    pktcSigEndPntConfigRtoMax,
+    pktcSigEndPntConfigRtoInit,
+    pktcSigEndPntConfigLongDurationKeepAlive,
+    pktcSigEndPntConfigThist,
+    pktcSigEndPntConfigStatus,
+    pktcSigEndPntConfigCallWaitingMaxRep,
+    pktcSigEndPntConfigCallWaitingDelay,
+    pktcSigEndPntStatusCallIpAddressType,
+    pktcSigEndPntStatusCallIpAddress,
+    pktcSigEndPntStatusError
+    }
+    STATUS current
+    DESCRIPTION
+          "Group of MIB objects containing signaling configuration
+           information that is applicable per-endpoint."
+    ::= { pktcSigGroups 2 }
+
+pktcInternationalGroup    OBJECT-GROUP
+    OBJECTS {
+    pktcSigEndPntConfigMinHookFlash,
+    pktcSigEndPntConfigMaxHookFlash,
+    pktcSigEndPntConfigPulseDialInterdigitTime,
+    pktcSigEndPntConfigPulseDialMinMakeTime,
+    pktcSigEndPntConfigPulseDialMaxMakeTime,
+    pktcSigEndPntConfigPulseDialMinBreakTime,
+    pktcSigEndPntConfigPulseDialMaxBreakTime,
+    pktcSigDevRingCadence,
+    pktcSigDevCidSigProtocol,
+    pktcSigDevCidDelayAfterLR,
+    pktcSigDevCidDtmfStartCode,
+    pktcSigDevCidDtmfEndCode,
+    pktcSigDevVmwiSigProtocol,
+    pktcSigDevVmwiDelayAfterLR,
+    pktcSigDevVmwiDtmfStartCode,
+    pktcSigDevVmwiDtmfEndCode,
+    pktcSigDevrpAsDtsDuration,
+    pktcSigDevCidMode,
+    pktcSigDevCidAfterRing,
+    pktcSigDevCidAfterDTAS,
+    pktcSigDevCidAfterRPAS,
+    pktcSigDevRingAfterCID,
+    pktcSigDevCidDTASAfterLR,
+    pktcSigDevVmwiMode,
+    pktcSigDevVmwiAfterDTAS,
+    pktcSigDevVmwiAfterRPAS,
+    pktcSigDevVmwiDTASAfterLR,
+    pktcSigPowerRingFrequency,
+    pktcSigPulseSignalFrequency,
+    pktcSigPulseSignalDbLevel,
+    pktcSigPulseSignalDuration,
+    pktcSigPulseSignalPulseInterval,
+    pktcSigPulseSignalRepeatCount,
+    pktcSigDevToneDbLevel,
+    pktcSigDevToneFreqCounter,
+    pktcSigDevToneWholeToneRepeatCount,
+    pktcSigDevToneSteady,
+    pktcSigDevToneFirstFreqValue,
+    pktcSigDevToneSecondFreqValue,
+    pktcSigDevToneThirdFreqValue,
+    pktcSigDevToneFourthFreqValue,
+    pktcSigDevToneFreqMode,
+    pktcSigDevToneFreqAmpModePrtg,
+    pktcSigDevToneFreqOnDuration,
+    pktcSigDevToneFreqOffDuration,
+    pktcSigDevToneFreqRepeatCount
+    }
+    STATUS current
+    DESCRIPTION
+        " Group of objects that extend the behavior of existing
+          objects to support operations in the widest possible set
+          of international marketplaces.  Note that many of these
+          objects represent a superset of behaviors described in
+          other objects within this MIB module."
+    ::= { pktcSigGroups 3 }
+
+pktcLLinePackageGroup  OBJECT-GROUP
+    OBJECTS {
+    pktcSigDevR0Cadence,
+    pktcSigDevR1Cadence,
+    pktcSigDevR2Cadence,
+    pktcSigDevR3Cadence,
+    pktcSigDevR4Cadence,
+    pktcSigDevR5Cadence,
+    pktcSigDevR6Cadence,
+    pktcSigDevR7Cadence,
+    pktcSigDevRgCadence,
+    pktcSigDevRsCadence
+    }
+    STATUS current
+    DESCRIPTION
+    "Group of Objects to support the L line package."
+    ::= { pktcSigGroups 4 }
+
+pktcELinePackageGroup  OBJECT-GROUP
+    OBJECTS {
+    pktcSigDevR0Cadence,
+    pktcSigDevR1Cadence,
+    pktcSigDevR2Cadence,
+    pktcSigDevR3Cadence,
+    pktcSigDevR4Cadence,
+    pktcSigDevR5Cadence,
+    pktcSigDevR6Cadence,
+    pktcSigDevR7Cadence,
+    pktcSigDevRgCadence,
+    pktcSigDevRsCadence,
+    pktcSigPulseSignalFrequency,
+    pktcSigPulseSignalDbLevel,
+    pktcSigPulseSignalDuration,
+    pktcSigPulseSignalPulseInterval,
+    pktcSigPulseSignalRepeatCount,
+    pktcSigDevRingCadence
+    }
+    STATUS current
+    DESCRIPTION
+        "Group of Objects to support the E line package."
+    ::= { pktcSigGroups 5 }
+
+END
diff --git a/snmp_builder/mibs/POLICY-BASED-MANAGEMENT-MIB.mib b/snmp_builder/mibs/POLICY-BASED-MANAGEMENT-MIB.mib
new file mode 100644
index 0000000..b7fb64d
--- /dev/null
+++ b/snmp_builder/mibs/POLICY-BASED-MANAGEMENT-MIB.mib
@@ -0,0 +1,2060 @@
+POLICY-BASED-MANAGEMENT-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Gauge32, Unsigned32,
+    mib-2                                       FROM SNMPv2-SMI
+    RowStatus, RowPointer, TEXTUAL-CONVENTION,
+    DateAndTime, StorageType                    FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                          FROM SNMPv2-CONF
+    SnmpAdminString                             FROM SNMP-FRAMEWORK-MIB;
+
+--  Policy-Based Management MIB
+
+pmMib MODULE-IDENTITY
+    LAST-UPDATED "200502070000Z"  -- February 7, 2005
+    ORGANIZATION "IETF SNMP Configuration Working Group"
+    CONTACT-INFO
+        "
+
+        Steve Waldbusser
+        Phone: +1-650-948-6500
+        Fax:   +1-650-745-0671
+        Email: waldbusser@nextbeacon.com
+
+        Jon Saperia (WG Co-chair)
+        JDS Consulting, Inc.
+        84 Kettell Plain Road.
+        Stow MA 01775
+        USA
+        Phone: +1-978-461-0249
+        Fax:   +1-617-249-0874
+        Email: saperia@jdscons.com
+
+        Thippanna Hongal
+        Riverstone Networks, Inc.
+        5200 Great America Parkway
+        Santa Clara, CA, 95054
+        USA
+
+        Phone: +1-408-878-6562
+        Fax:   +1-408-878-6501
+        Email: hongal@riverstonenet.com
+
+        David Partain (WG Co-chair)
+        Postal: Ericsson AB
+                P.O. Box 1248
+                SE-581 12 Linkoping
+                Sweden
+        Tel: +46 13 28 41 44
+        E-mail: David.Partain@ericsson.com
+
+        Any questions or comments about this document can also be
+        directed to the working group at snmpconf@snmp.com."
+    DESCRIPTION
+        "The MIB module for policy-based configuration of SNMP
+        infrastructures.
+
+        Copyright (C) The Internet Society (2005).  This version of
+        this MIB module is part of RFC 4011; see the RFC itself for
+        full legal notices."
+
+    REVISION "200502070000Z"    -- February 7, 2005
+    DESCRIPTION
+        "The original version of this MIB, published as RFC4011."
+    ::= { mib-2 124 }
+
+PmUTF8String ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "An octet string containing information typically in
+        human-readable form.
+
+        To facilitate internationalization, this
+        information is represented by using the ISO/IEC
+        IS 10646-1 character set, encoded as an octet
+        string using the UTF-8 transformation format
+        described in RFC 3629.
+
+        As additional code points are added by
+        amendments to the 10646 standard from time
+        to time, implementations must be prepared to
+        encounter any code point from 0x00000000 to
+        0x10FFFF.  Byte sequences that do not
+        correspond to the valid UTF-8 encoding of a
+        code point or that are outside this range are
+        prohibited.
+
+        The use of control codes should be avoided.
+
+        When it is necessary to represent a newline,
+        the control code sequence CR LF should be used.
+
+        For code points not directly supported by user
+        interface hardware or software, an alternative
+        means of entry and display, such as hexadecimal,
+        may be provided.
+
+        For information encoded in 7-bit US-ASCII,
+        the UTF-8 encoding is identical to the
+        US-ASCII encoding.
+
+        UTF-8 may require multiple bytes to represent a
+        single character/code point; thus, the length
+        of this object in octets may be different from
+        the number of characters encoded.  Similarly,
+        size constraints refer to the number of encoded
+        octets, not the number of characters represented
+        by an encoding.
+
+        Note that when this TC is used for an object
+        used or envisioned to be used as an index, then
+        a SIZE restriction MUST be specified so that the
+        number of sub-identifiers for any object instance
+        does not exceed the limit of 128, as defined by
+
+        RFC 3416.
+
+        Note that the size of PmUTF8String object is
+        measured in octets, not characters."
+       SYNTAX       OCTET STRING (SIZE (0..65535))
+
+-- The policy table
+
+pmPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The policy table.  A policy is a pairing of a
+        policyCondition and a policyAction that is used to apply the
+        action to a selected set of elements."
+    ::= { pmMib 1 }
+
+pmPolicyEntry OBJECT-TYPE
+    SYNTAX      PmPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the policy table representing one policy."
+    INDEX { pmPolicyAdminGroup, pmPolicyIndex }
+    ::= { pmPolicyTable 1 }
+
+PmPolicyEntry ::= SEQUENCE {
+    pmPolicyAdminGroup            PmUTF8String,
+    pmPolicyIndex                 Unsigned32,
+    pmPolicyPrecedenceGroup       PmUTF8String,
+    pmPolicyPrecedence            Unsigned32,
+    pmPolicySchedule              Unsigned32,
+    pmPolicyElementTypeFilter     PmUTF8String,
+    pmPolicyConditionScriptIndex  Unsigned32,
+    pmPolicyActionScriptIndex     Unsigned32,
+    pmPolicyParameters            OCTET STRING,
+    pmPolicyConditionMaxLatency   Unsigned32,
+    pmPolicyActionMaxLatency      Unsigned32,
+    pmPolicyMaxIterations         Unsigned32,
+    pmPolicyDescription           PmUTF8String,
+    pmPolicyMatches               Gauge32,
+    pmPolicyAbnormalTerminations  Gauge32,
+    pmPolicyExecutionErrors       Counter32,
+    pmPolicyDebugging             INTEGER,
+    pmPolicyAdminStatus           INTEGER,
+    pmPolicyStorageType           StorageType,
+    pmPolicyRowStatus             RowStatus
+
+}
+
+pmPolicyAdminGroup OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An administratively assigned string that can be used to group
+        policies for convenience, for readability, or to simplify
+        configuration of access control.
+
+        The value of this string does not affect policy processing in
+        any way.  If grouping is not desired or necessary, this object
+        may be set to a zero-length string."
+    ::= { pmPolicyEntry 1 }
+
+pmPolicyIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A unique index for this policy entry, unique among all
+         policies regardless of administrative group."
+    ::= { pmPolicyEntry 2 }
+
+pmPolicyPrecedenceGroup OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An administratively assigned string that is used to group
+        policies.  For each element, only one policy in the same
+        precedence group may be active on that element.  If multiple
+        policies would be active on an element (because their
+        conditions return non-zero), the execution environment will
+        only allow the policy with the highest value of
+        pmPolicyPrecedence to be active.
+
+        All values of this object must have been successfully
+        transformed by Stringprep RFC 3454.  Management stations
+        must perform this translation and must only set this object to
+        string values that have been transformed."
+    ::= { pmPolicyEntry 3 }
+
+pmPolicyPrecedence OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If, while checking to see which policy conditions match an
+        element, 2 or more ready policies in the same precedence group
+        match the same element, the pmPolicyPrecedence object provides
+        the rule to arbitrate which single policy will be active on
+        'this element'.  Of policies in the same precedence group, only
+        the ready and matching policy with the highest precedence
+        value (e.g., 2 is higher than 1) will have its policy action
+        periodically executed on 'this element'.
+
+        When a policy is active on an element but the condition ceases
+        to match the element, its action (if currently running) will
+        be allowed to finish and then the condition-matching ready
+        policy with the next-highest precedence will immediately
+        become active (and have its action run immediately).  If the
+        condition of a higher-precedence ready policy suddenly begins
+        matching an element, the previously-active policy's action (if
+        currently running) will be allowed to finish and then the
+        higher precedence policy will immediately become active.  Its
+        action will run immediately, and any lower-precedence matching
+        policy will not be active anymore.
+
+        In the case where multiple ready policies share the highest
+        value, it is an implementation-dependent matter as to which
+        single policy action will be chosen.
+
+        Note that if it is necessary to take certain actions after a
+        policy is no longer active on an element, these actions should
+        be included in a lower-precedence policy that is in the same
+        precedence group."
+    ::= { pmPolicyEntry 4 }
+
+pmPolicySchedule OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "This policy will be ready if any of the associated schedule
+         entries are active.
+
+         If the value of this object is 0, this policy is always
+         ready.
+
+         If the value of this object is non-zero but doesn't
+         refer to a schedule group that includes an active schedule,
+         then the policy will not be ready, even if this is due to a
+         misconfiguration of this object or the pmSchedTable."
+    ::= { pmPolicyEntry 5 }
+
+pmPolicyElementTypeFilter OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..128))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the element types for which this policy
+        can be executed.
+
+        The format of this object will be a sequence of
+        pmElementTypeRegOIDPrefix values, encoded in the following
+        BNF form:
+
+        elementTypeFilter:   oid [ ';' oid ]*
+                      oid:   subid [ '.' subid ]*
+                    subid:   '0' | decimal_constant
+
+        For example, to register for the policy to be run on all
+        interface elements, the 'ifEntry' element type will be
+        registered as '1.3.6.1.2.1.2.2.1'.
+
+        If a value is included that does not represent a registered
+        pmElementTypeRegOIDPrefix, then that value will be ignored."
+    ::= { pmPolicyEntry 6 }
+
+pmPolicyConditionScriptIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "A pointer to the row or rows in the pmPolicyCodeTable that
+         contain the condition code for this policy.  When a policy
+         entry is created, a pmPolicyCodeIndex value unused by this
+         policy's adminGroup will be assigned to this object.
+
+         A policy condition is one or more PolicyScript statements
+         that result(s) in a boolean value that represents whether
+         an element is a member of a set of elements upon which an
+         action is to be performed.  If a policy is ready and the
+         condition returns true for an element of a proper element
+         type, and if no higher-precedence policy should be active,
+         then the policy is active on that element.
+
+         Condition evaluation stops immediately when any run-time
+         exception is detected, and the policyAction is not executed.
+
+         The policyCondition is evaluated for various elements.  Any
+         element for which the policyCondition returns any nonzero value
+         will match the condition and will have the associated
+
+         policyAction executed on that element unless a
+         higher-precedence policy in the same precedence group also
+         matches 'this element'.
+
+         If the condition object is empty (contains no code) or
+         otherwise does not return a value, the element will not be
+         matched.
+
+         When this condition is executed, if SNMP requests are made to
+         the local system and secModel/secName/secLevel aren't
+         specified, access to objects is under the security
+         credentials of the requester who most recently modified the
+         associated pmPolicyAdminStatus object.  If SNMP requests are
+         made in which secModel/secName/secLevel are specified, then
+         the specified credentials are retrieved from the local
+         configuration datastore only if VACM is configured to
+         allow access to the requester who most recently modified the
+         associated pmPolicyAdminStatus object.  See the Security
+         Considerations section for more information."
+    ::= { pmPolicyEntry 7 }
+
+pmPolicyActionScriptIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "A pointer to the row or rows in the pmPolicyCodeTable that
+         contain the action code for this policy.  When a policy entry
+         is created, a pmPolicyCodeIndex value unused by this policy's
+         adminGroup will be assigned to this object.
+
+         A PolicyAction is an operation performed on a
+         set of elements for which the policy is active.
+
+         Action evaluation stops immediately when any run-time
+         exception is detected.
+
+         When this condition is executed, if SNMP requests are made to
+         the local system and secModel/secName/secLevel aren't
+         specified, access to objects is under the security
+         credentials of the requester who most recently modified the
+         associated pmPolicyAdminStatus object.  If SNMP requests are
+         made in which secModel/secName/secLevel are specified, then
+         the specified credentials are retrieved from the local
+         configuration datastore only if VACM is configured to
+         allow access to the requester who most recently modified the
+         associated pmPolicyAdminStatus object.  See the Security
+         Considerations section for more information."
+    ::= { pmPolicyEntry 8 }
+
+pmPolicyParameters OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..65535))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "From time to time, policy scripts may seek one or more
+        parameters (e.g., site-specific constants).  These parameters
+        may be installed with the script in this object and are
+        accessible to the script via the getParameters() function.  If
+        it is necessary for multiple parameters to be passed to the
+        script, the script can choose whatever encoding/delimiting
+        mechanism is most appropriate."
+    ::= { pmPolicyEntry 9 }
+
+pmPolicyConditionMaxLatency OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..2147483647)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Every element under the control of this agent is
+        re-checked periodically to see whether it is under control
+        of this policy by re-running the condition for this policy.
+        This object lets the manager control the maximum amount of
+        time that may pass before an element is re-checked.
+
+        In other words, in any given interval of this duration, all
+        elements must be re-checked.  Note that how the policy agent
+        schedules the checking of various elements within this
+        interval is an implementation-dependent matter.
+        Implementations may wish to re-run a condition more
+        quickly if they note a change to the role strings for an
+        element."
+    ::= { pmPolicyEntry 10 }
+
+pmPolicyActionMaxLatency OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..2147483647)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Every element that matches this policy's condition and is
+        therefore under control of this policy will have this policy's
+        action executed periodically to ensure that the element
+        remains in the state dictated by the policy.
+        This object lets the manager control the maximum amount of
+
+        time that may pass before an element has the action run on
+        it.
+
+        In other words, in any given interval of this duration, all
+        elements under control of this policy must have the action run
+        on them.  Note that how the policy agent schedules the policy
+        action on various elements within this interval is an
+        implementation-dependent matter."
+    ::= { pmPolicyEntry 11 }
+
+pmPolicyMaxIterations OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If a condition or action script iterates in loops too many
+        times in one invocation, the execution environment may
+        consider it in an infinite loop or otherwise not acting
+        as intended and may be terminated by the execution
+        environment.  The execution environment will count the
+        cumulative number of times all 'for' or 'while' loops iterated
+        and will apply a threshold to determine when to terminate the
+        script.  What threshold the execution environment uses is an
+        implementation-dependent manner, but the value of
+        this object SHOULD be the basis for choosing the threshold for
+        each script.  The value of this object represents a
+        policy-specific threshold and can be tuned for policies of
+        varying workloads.  If this value is zero, no
+        threshold will be enforced except for any
+        implementation-dependent maximum.  Regardless of this value,
+        the agent is allowed to terminate any script invocation that
+        exceeds a local CPU or memory limitation.
+
+        Note that the condition and action invocations are tracked
+        separately."
+    ::= { pmPolicyEntry 12 }
+
+pmPolicyDescription OBJECT-TYPE
+    SYNTAX      PmUTF8String
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "A description of this rule and its significance, typically
+         provided by a human."
+    ::= { pmPolicyEntry 13 }
+
+pmPolicyMatches OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "elements"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The number of elements that, in their most recent execution
+         of the associated condition, were matched by the condition."
+    ::= { pmPolicyEntry 14 }
+
+pmPolicyAbnormalTerminations OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "elements"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The number of elements that, in their most recent execution
+         of the associated condition or action, have experienced a
+         run-time exception and terminated abnormally.  Note that if a
+         policy was experiencing a run-time exception while processing
+         a particular element but runs normally on a subsequent
+         invocation, this number can decline."
+    ::= { pmPolicyEntry 15 }
+
+pmPolicyExecutionErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "errors"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "The total number of times that execution of this policy's
+         condition or action has been terminated due to run-time
+         exceptions."
+    ::= { pmPolicyEntry 16 }
+
+pmPolicyDebugging OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    off(1),
+                    on(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "The status of debugging for this policy.  If this is turned
+         on(2), log entries will be created in the pmDebuggingTable
+         for each run-time exception that is experienced by this
+         policy."
+    DEFVAL { off }
+    ::= { pmPolicyEntry 17 }
+
+pmPolicyAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disabled(1),
+                    enabled(2),
+                    enabledAutoRemove(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "The administrative status of this policy.
+
+         The policy will be valid only if the associated
+         pmPolicyRowStatus is set to active(1) and this object is set
+         to enabled(2) or enabledAutoRemove(3).
+
+         If this object is set to enabledAutoRemove(3), the next time
+         the associated schedule moves from the active state to the
+         inactive state, this policy will immediately be deleted,
+         including any associated entries in the pmPolicyCodeTable.
+
+         The following related objects may not be changed unless this
+         object is set to disabled(1):
+             pmPolicyPrecedenceGroup, pmPolicyPrecedence,
+             pmPolicySchedule, pmPolicyElementTypeFilter,
+             pmPolicyConditionScriptIndex, pmPolicyActionScriptIndex,
+             pmPolicyParameters, and any pmPolicyCodeTable row
+             referenced by this policy.
+         In order to change any of these parameters, the policy must
+         be moved to the disabled(1) state, changed, and then
+         re-enabled.
+
+         When this policy moves to either enabled state from the
+         disabled state, any cached values of policy condition must be
+         erased, and any Policy or PolicyElement scratchpad values for
+         this policy should be removed.  Policy execution will begin by
+         testing the policy condition on all appropriate elements."
+    ::= { pmPolicyEntry 18 }
+
+pmPolicyStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this policy and any associated
+         entries in the pmPolicyCodeTable are kept in volatile storage
+         and lost upon reboot or if this row is backed up by
+         non-volatile or permanent storage.
+
+         If the value of this object is 'permanent', the values for
+         the associated pmPolicyAdminStatus object must remain
+         writable."
+    ::= { pmPolicyEntry 19 }
+
+pmPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "The row status of this pmPolicyEntry.
+
+         The status may not be set to active if any of the related
+         entries in the pmPolicyCode table do not have a status of
+         active or if any of the objects in this row are not set to
+         valid values.  Only the following objects may be modified
+         while in the active state:
+             pmPolicyParameters
+             pmPolicyConditionMaxLatency
+             pmPolicyActionMaxLatency
+             pmPolicyDebugging
+             pmPolicyAdminStatus
+
+         If this row is deleted, any associated entries in the
+         pmPolicyCodeTable will be deleted as well."
+    ::= { pmPolicyEntry 20 }
+
+-- Policy Code Table
+
+pmPolicyCodeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmPolicyCodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The pmPolicyCodeTable stores the code for policy conditions and
+        actions.
+
+        An example of the relationships between the code table and the
+        policy table follows:
+
+        pmPolicyTable
+            AdminGroup  Index   ConditionScriptIndex  ActionScriptIndex
+        A   ''          1       1                     2
+        B   'oper'      1       1                     2
+        C   'oper'      2       3                     4
+
+        pmPolicyCodeTable
+        AdminGroup  ScriptIndex  Segment    Note
+
+        ''          1            1          Filter for policy A
+        ''          2            1          Action for policy A
+        'oper'      1            1          Filter for policy B
+        'oper'      2            1          Action 1/2 for policy B
+        'oper'      2            2          Action 2/2 for policy B
+        'oper'      3            1          Filter for policy C
+        'oper'      4            1          Action for policy C
+
+        In this example, there are 3 policies: 1 in the '' adminGroup,
+        and 2 in the 'oper' adminGroup.  Policy A has been assigned
+        script indexes 1 and 2 (these script indexes are assigned out of
+        a separate pool per adminGroup), with 1 code segment each for
+        the filter and the action.  Policy B has been assigned script
+        indexes 1 and 2 (out of the pool for the 'oper' adminGroup).
+        While the filter has 1 segment, the action is longer and is
+        loaded into 2 segments.  Finally, Policy C has been assigned
+        script indexes 3 and 4, with 1 code segment each for the filter
+        and the action."
+    ::= { pmMib 2 }
+
+pmPolicyCodeEntry OBJECT-TYPE
+    SYNTAX      PmPolicyCodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the policy code table representing one code
+        segment.  Entries that share a common AdminGroup/ScriptIndex
+        pair make up a single script.  Valid values of ScriptIndex are
+        retrieved from pmPolicyConditionScriptIndex and
+        pmPolicyActionScriptIndex after a pmPolicyEntry is
+        created.  Segments of code can then be written to this table
+        with the learned ScriptIndex values.
+
+        The StorageType of this entry is determined by the value of
+        the associated pmPolicyStorageType.
+
+        The pmPolicyAdminGroup element of the index represents the
+        administrative group of the policy of which this code entry is
+        a part."
+    INDEX { pmPolicyAdminGroup, pmPolicyCodeScriptIndex,
+            pmPolicyCodeSegment }
+    ::= { pmPolicyCodeTable 1 }
+
+PmPolicyCodeEntry ::= SEQUENCE {
+    pmPolicyCodeScriptIndex    Unsigned32,
+    pmPolicyCodeSegment        Unsigned32,
+    pmPolicyCodeText           PmUTF8String,
+    pmPolicyCodeStatus         RowStatus
+
+}
+
+pmPolicyCodeScriptIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A unique index for each policy condition or action.  The code
+         for each such condition or action may be composed of multiple
+         entries in this table if the code cannot fit in one entry.
+         Values of pmPolicyCodeScriptIndex may not be used unless
+         they have previously been assigned in the
+         pmPolicyConditionScriptIndex or pmPolicyActionScriptIndex
+         objects."
+    ::= { pmPolicyCodeEntry 1 }
+
+pmPolicyCodeSegment OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A unique index for each segment of a policy condition or
+         action.
+
+         When a policy condition or action spans multiple entries in
+         this table, the code of that policy starts from the
+         lowest-numbered segment and continues with increasing segment
+         values until it ends with the highest-numbered segment."
+    ::= { pmPolicyCodeEntry 2 }
+
+pmPolicyCodeText OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (1..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "A segment of policy code (condition or action).  Lengthy
+         Policy conditions or actions may be stored in multiple
+         segments in this table that share the same value of
+         pmPolicyCodeScriptIndex.  When multiple segments are used, it
+         is recommended that each segment be as large as is practical.
+
+         Entries in this table are associated with policies by values
+         of the pmPolicyConditionScriptIndex and
+         pmPolicyActionScriptIndex objects.  If the status of the
+         related policy is active, then this object may not be
+         modified."
+    ::= { pmPolicyCodeEntry 3 }
+
+pmPolicyCodeStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "The status of this code entry.
+
+         Entries in this table are associated with policies by values
+         of the pmPolicyConditionScriptIndex and
+         pmPolicyActionScriptIndex objects.  If the status of the
+         related policy is active, then this object can not be
+         modified (i.e., deleted or set to notInService), nor may new
+         entries be created.
+
+         If the status of this object is active, no objects in this
+         row may be modified."
+    ::= { pmPolicyCodeEntry 4 }
+
+-- Element Type Registration Table
+
+pmElementTypeRegTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmElementTypeRegEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A registration table for element types managed by this
+        system.
+
+        The Element Type Registration table allows the manager to
+        learn what element types are being managed by the system and
+        to register new types, if necessary.  An element type is
+        registered by providing the OID of an SNMP object (i.e.,
+        without the instance).  Each SNMP instance that exists under
+        that object is a distinct element.  The index of the element is
+        the index part of the discovered OID.  This index will be
+        supplied to policy conditions and actions so that this code
+        can inspect and configure the element.
+
+        For example, this table might contain the following entries.
+        The first three are agent-installed, and the 4th was
+        downloaded by a management station:
+
+  OIDPrefix        MaxLatency  Description               StorageType
+  ifEntry          100 mS      interfaces - builtin      readOnly
+  0.0              100 mS      system element - builtin  readOnly
+  frCircuitEntry   100 mS      FR Circuits - builtin     readOnly
+  hrSWRunEntry     60 sec      Running Processes         volatile
+
+        Note that agents may automatically configure elements in this
+        table for frequently used element types (interfaces, circuits,
+        etc.).  In particular, it may configure elements for whom
+        discovery is optimized in one or both of the following ways:
+
+        1. The agent may discover elements by scanning internal data
+           structures as opposed to issuing local SNMP requests.  It is
+           possible to recreate the exact semantics described in this
+           table even if local SNMP requests are not issued.
+
+        2. The agent may receive asynchronous notification of new
+           elements (for example, 'card inserted') and use that
+           information to instantly create elements rather than
+           through polling.  A similar feature might be available for
+           the deletion of elements.
+
+        Note that the disposition of agent-installed entries is
+        described by the pmPolicyStorageType object."
+    ::= { pmMib 3 }
+
+pmElementTypeRegEntry OBJECT-TYPE
+    SYNTAX      PmElementTypeRegEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A registration of an element type.
+
+        Note that some values of this table's index may result in an
+        instance name that exceeds a length of 128 sub-identifiers,
+        which exceeds the maximum for the SNMP protocol.
+        Implementations should take care to avoid such values."
+    INDEX       { pmElementTypeRegOIDPrefix }
+    ::= { pmElementTypeRegTable 1 }
+
+PmElementTypeRegEntry ::= SEQUENCE {
+    pmElementTypeRegOIDPrefix     OBJECT IDENTIFIER,
+    pmElementTypeRegMaxLatency    Unsigned32,
+    pmElementTypeRegDescription   PmUTF8String,
+    pmElementTypeRegStorageType   StorageType,
+    pmElementTypeRegRowStatus     RowStatus
+}
+
+pmElementTypeRegOIDPrefix OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This OBJECT IDENTIFIER value identifies a table in which all
+
+        elements of this type will be found.  Every row in the
+        referenced table will be treated as an element for the
+        period of time that it remains in the table.  The agent will
+        then execute policy conditions and actions as appropriate on
+        each of these elements.
+
+        This object identifier value is specified down to the 'entry'
+        component (e.g., ifEntry) of the identifier.
+
+        The index of each discovered row will be passed to each
+        invocation of the policy condition and policy action.
+
+        The actual mechanism by which instances are discovered is
+        implementation dependent.  Periodic walks of the table to
+        discover the rows in the table is one such mechanism.  This
+        mechanism has the advantage that it can be performed by an
+        agent with no knowledge of the names, syntax, or semantics
+        of the MIB objects in the table.  This mechanism also serves as
+        the reference design.  Other implementation-dependent
+        mechanisms may be implemented that are more efficient (perhaps
+        because they are hard coded) or that don't require polling.
+        These mechanisms must discover the same elements as would the
+        table-walking reference design.
+
+        This object can contain a OBJECT IDENTIFIER, '0.0'.
+        '0.0' represents the single instance of the system
+        itself and provides an execution context for policies to
+        operate on the 'system element' and on MIB objects
+        modeled as scalars.  For example, '0.0' gives an execution
+        context for policy-based selection of the operating system
+        code version (likely modeled as a scalar MIB object).  The
+        element type '0.0' always exists; as a consequence, no actual
+        discovery will take place, and the pmElementTypeRegMaxLatency
+        object will have no effect for the '0.0' element
+        type.  However, if the '0.0' element type is not registered in
+        the table, policies will not be executed on the '0.0' element.
+
+        When a policy is invoked on behalf of a '0.0' entry in this
+        table, the element name will be '0.0', and there is no index
+        of 'this element' (in other words, it has zero length).
+
+        As this object is used in the index for the
+        pmElementTypeRegTable, users of this table should be careful
+        not to create entries that would result in instance names with
+        more than 128 sub-identifiers."
+    ::= { pmElementTypeRegEntry 2 }
+
+pmElementTypeRegMaxLatency OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The PM agent is responsible for discovering new elements of
+        types that are registered.  This object lets the manager
+        control the maximum amount of time that may pass between the
+        time an element is created and when it is discovered.
+
+        In other words, in any given interval of this duration, all
+        new elements must be discovered.  Note that how the policy
+        agent schedules the checking of various elements within this
+        interval is an implementation-dependent matter."
+    ::= { pmElementTypeRegEntry 3 }
+
+pmElementTypeRegDescription OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..64))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A descriptive label for this registered type."
+    ::= { pmElementTypeRegEntry 4 }
+
+pmElementTypeRegStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this row is kept
+         in volatile storage and lost upon reboot or
+         backed up by non-volatile or permanent storage.
+
+         If the value of this object is 'permanent', no values in the
+         associated row have to be writable."
+    ::= { pmElementTypeRegEntry 5 }
+
+pmElementTypeRegRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this registration entry.
+
+        If the value of this object is active, no objects in this row
+        may be modified."
+    ::= { pmElementTypeRegEntry 6 }
+
+-- Role Table
+
+pmRoleTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmRoleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The pmRoleTable is a read-create table that organizes role
+        strings sorted by element.  This table is used to create and
+        modify role strings and their associations, as well as to allow
+        a management station to learn about the existence of roles and
+        their associations.
+
+        It is the responsibility of the agent to keep track of any
+        re-indexing of the underlying SNMP elements and to continue to
+        associate role strings with the element with which they were
+        initially configured.
+
+        Policy MIB agents that have elements in multiple local SNMP
+        contexts have to allow some roles to be assigned to elements
+        in particular contexts.  This is particularly true when some
+        elements have the same names in different contexts and the
+        context is required to disambiguate them.  In those situations,
+        a value for the pmRoleContextName may be provided.  When a
+        pmRoleContextName value is not provided, the assignment is to
+        the element in the default context.
+
+        Policy MIB agents that discover elements on other systems and
+        execute policies on their behalf need to have access to role
+        information for these remote elements.  In such situations,
+        role assignments for other systems can be stored in this table
+        by providing values for the pmRoleContextEngineID parameters.
+
+    For example:
+    Example:
+    element       role    context ctxEngineID   #comment
+    ifindex.1     gold                          local, default context
+    ifindex.2     gold                          local, default context
+    repeaterid.1  foo     rptr1                 local, rptr1 context
+    repeaterid.1  bar     rptr2                 local, rptr2 context
+    ifindex.1     gold    ''      A             different system
+    ifindex.1     gold    ''      B             different system
+
+         The agent must store role string associations in non-volatile
+         storage."
+    ::= { pmMib 4 }
+
+pmRoleEntry OBJECT-TYPE
+    SYNTAX      PmRoleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A role string entry associates a role string with an
+         individual element.
+
+         Note that some combinations of index values may result in an
+         instance name that exceeds a length of 128 sub-identifiers,
+         which exceeds the maximum for the SNMP
+         protocol.  Implementations should take care to avoid such
+         combinations."
+    INDEX       { pmRoleElement, pmRoleContextName,
+                  pmRoleContextEngineID, pmRoleString }
+    ::= { pmRoleTable 1 }
+
+PmRoleEntry ::= SEQUENCE {
+    pmRoleElement          RowPointer,
+    pmRoleContextName      SnmpAdminString,
+    pmRoleContextEngineID  OCTET STRING,
+    pmRoleString           PmUTF8String,
+    pmRoleStatus           RowStatus
+}
+
+pmRoleElement OBJECT-TYPE
+    SYNTAX      RowPointer
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The element with which this role string is associated.
+
+         For example, if the element is interface 3, then this object
+         will contain the OID for 'ifIndex.3'.
+
+         If the agent assigns new indexes in the MIB table to
+         represent the same underlying element (re-indexing), the
+         agent will modify this value to contain the new index for the
+         underlying element.
+
+         As this object is used in the index for the pmRoleTable,
+         users of this table should be careful not to create entries
+         that would result in instance names with more than 128
+         sub-identifiers."
+    ::= { pmRoleEntry 1 }
+
+pmRoleContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is not in the default SNMP context
+        for the target system, this object is used to identify the
+        context.  If the element is in the default context, this object
+        is equal to the empty string."
+    ::= { pmRoleEntry 2 }
+
+pmRoleContextEngineID OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is on a remote system, this object
+        is used to identify the remote system.  This object contains
+        the contextEngineID of the system for which this role string
+        assignment is valid.  If the element is on the local system
+        this object will be the empty string."
+    ::= { pmRoleEntry 3 }
+
+pmRoleString OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..64))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The role string that is associated with an element through
+         this table.  All role strings must have been successfully
+         transformed by Stringprep RFC 3454.  Management stations
+         must perform this translation and must only set this object
+         to string values that have been transformed.
+
+         A role string is an administratively specified characteristic
+         of a managed element (for example, an interface).  It is a
+         selector for policy rules, that determines the applicability of
+         the rule to a particular managed element."
+    ::= { pmRoleEntry 4 }
+
+pmRoleStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "The status of this role string.
+
+         If the value of this object is active, no object in this row
+         may be modified."
+    ::= { pmRoleEntry 5 }
+
+-- Capabilities table
+
+pmCapabilitiesTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The pmCapabilitiesTable contains a description of
+         the inherent capabilities of the system so that
+         management stations can learn of an agent's capabilities and
+         differentially install policies based on the capabilities.
+
+         Capabilities are expressed at the system level.  There can be
+         variation in how capabilities are realized from one vendor or
+         model to the next.  Management systems should consider these
+         differences before selecting which policy to install in a
+         system."
+    ::= { pmMib 5 }
+
+pmCapabilitiesEntry OBJECT-TYPE
+    SYNTAX      PmCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A capabilities entry holds an OID indicating support for a
+         particular capability.  Capabilities may include hardware and
+         software functions and the implementation of MIB
+         Modules.  The semantics of the OID are defined in the
+         description of pmCapabilitiesType.
+
+         Entries appear in this table if any element in the system has
+         a specific capability.  A capability should appear in this
+         table only once, regardless of the number of elements in the
+         system with that capability.  An entry is removed from this
+         table when the last element in the system that has the
+         capability is removed.  In some cases, capabilities are
+         dynamic and exist only in software.  This table should have an
+         entry for the capability even if there are no current
+         instances.  Examples include systems with database or WEB
+         services.  While the system has the ability to create new
+         databases or WEB services, the entry should exist.  In these
+         cases, the ability to create these services could come from
+         other processes that are running in the system, even though
+         there are no currently open databases or WEB servers running.
+
+         Capabilities may include the implementation of MIB Modules
+         but need not be limited to those that represent MIB Modules
+         with one or more configurable objects.  It may also be
+         valuable to include entries for capabilities that do not
+         include configuration objects, as that information, in
+         combination with other entries in this table, might be used
+         by the management software to determine whether to
+         install a policy.
+
+         Vendor software may also add entries in this table to express
+         capabilities from their private branch.
+
+         Note that some values of this table's index may result in an
+         instance name that exceeds a length of 128 sub-identifiers,
+         which exceeds the maximum for the SNMP
+         protocol.  Implementations should take care to avoid such
+         values."
+    INDEX       { pmCapabilitiesType }
+    ::= { pmCapabilitiesTable 1 }
+
+PmCapabilitiesEntry ::= SEQUENCE {
+    pmCapabilitiesType               OBJECT IDENTIFIER
+}
+
+pmCapabilitiesType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "There are three types of OIDs that may be present in the
+         pmCapabilitiesType object:
+
+         1) The OID of a MODULE-COMPLIANCE macro that represents the
+         highest level of compliance realized by the agent for that
+         MIB Module.  For example, an agent that implements the OSPF
+         MIB Module at the highest level of compliance would have the
+         value of '1.3.6.1.2.1.14.15.2' in the pmCapabilitiesType
+         object.  For software that realizes standard MIB
+         Modules that do not have compliance statements, the base OID
+         of the MIB Module should be used instead.  If the OSPF MIB
+         Module had not been created with a compliance statement, then
+         the correct value of the pmCapabilitiesType would be
+         '1.3.6.1.2.1.14'.  In the cases where multiple compliance
+         statements in a MIB Module are supported by the agent, and
+         where one compliance statement does not by definition include
+         the other, each of the compliance OIDs would have entries in
+         this table.
+
+         MIB Documents can contain more than one MIB Module.  In the
+         case of OSPF, there is a second MIB Module
+         that describes notifications for the OSPF Version 2 Protocol.
+         If the agent also realizes these functions, an entry will
+         also exist for those capabilities in this table.
+
+         2) Vendors should install OIDs in this table that represent
+         vendor-specific capabilities.  These capabilities can be
+         expressed just as those described above for MIB Modules on
+         the standards track.  In addition, vendors may install any
+         OID they desire from their registered branch.  The OIDs may be
+         at any level of granularity, from the root of their entire
+         branch to an instance of a single OID.  There is no
+         restriction on the number of registrations they may make,
+         though care should be taken to avoid unnecessary entries.
+
+         3) OIDs that represent one capability or a collection of
+         capabilities that could be any collection of MIB Objects or
+         hardware or software functions may be created in working
+         groups and registered in a MIB Module.  Other entities (e.g.,
+         vendors) may also make registrations.  Software will register
+         these standard capability OIDs, as well as vendor specific
+         OIDs.
+
+         If the OID for a known capability is not present in the
+         table, then it should be assumed that the capability is not
+         implemented.
+
+         As this object is used in the index for the
+         pmCapabilitiesTable, users of this table should be careful
+         not to create entries that would result in instance names
+         with more than 128 sub-identifiers."
+    ::= { pmCapabilitiesEntry 1 }
+
+-- Capabilities override table
+
+pmCapabilitiesOverrideTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmCapabilitiesOverrideEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The pmCapabilitiesOverrideTable allows management stations
+         to override pmCapabilitiesTable entries that have been
+         registered by the agent.  This facility can be used to avoid
+         situations in which managers in the network send policies to
+         a system that has advertised a capability in the
+         pmCapabilitiesTable but that should not be installed on this
+         particular system.  One example could be newly deployed
+
+         equipment that is still in a trial state in a trial state or
+         resources reserved for some other administrative reason.
+         This table can also be used to override entries in the
+         pmCapabilitiesTable through the use of the
+         pmCapabilitiesOverrideState object.  Capabilities can also be
+         declared available in this table that were not registered in
+         the pmCapabilitiesTable.  A management application can make
+         an entry in this table for any valid OID and declare the
+         capability available by setting the
+         pmCapabilitiesOverrideState for that row to valid(1)."
+    ::= { pmMib 6 }
+
+pmCapabilitiesOverrideEntry OBJECT-TYPE
+    SYNTAX      PmCapabilitiesOverrideEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "An entry in this table indicates whether a particular
+         capability is valid or invalid.
+
+         Note that some values of this table's index may result in an
+         instance name that exceeds a length of 128 sub-identifiers,
+         which exceeds the maximum for the SNMP
+         protocol.  Implementations should take care to avoid such
+         values."
+    INDEX       { pmCapabilitiesOverrideType }
+    ::= { pmCapabilitiesOverrideTable 1 }
+
+PmCapabilitiesOverrideEntry ::= SEQUENCE {
+    pmCapabilitiesOverrideType               OBJECT IDENTIFIER,
+    pmCapabilitiesOverrideState              INTEGER,
+    pmCapabilitiesOverrideRowStatus          RowStatus
+}
+
+pmCapabilitiesOverrideType OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "This is the OID of the capability that is declared valid or
+         invalid by the pmCapabilitiesOverrideState value for this
+         row.  Any valid OID, as described in the pmCapabilitiesTable,
+         is permitted in the pmCapabilitiesOverrideType object.  This
+         means that capabilities can be expressed at any level, from a
+         specific instance of an object to a table or entire module.
+         There are no restrictions on whether these objects are from
+         standards track MIB documents or in the private branch of the
+         MIB.
+
+         If an entry exists in this table for which there is a
+         corresponding entry in the pmCapabilitiesTable, then this entry
+         shall have precedence over the entry in the
+         pmCapabilitiesTable.  All entries in this table must be
+         preserved across reboots.
+
+         As this object is used in the index for the
+         pmCapabilitiesOverrideTable, users of this table should be
+         careful not to create entries that would result in instance
+         names with more than 128 sub-identifiers."
+    ::= { pmCapabilitiesOverrideEntry 1 }
+
+pmCapabilitiesOverrideState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    invalid(1),
+                    valid(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "A pmCapabilitiesOverrideState of invalid indicates that
+         management software should not send policies to this system
+         for the capability identified in the
+         pmCapabilitiesOverrideType for this row of the table.  This
+         behavior is the same whether the capability represented by
+         the pmCapabilitiesOverrideType exists only in this table
+         (that is, it was installed by an external management
+         application) or exists in this table as well as the
+         pmCapabilitiesTable.  This would be the case when a manager
+         wanted to disable a capability that the native management
+         system found and registered in the pmCapabilitiesTable.
+
+         An entry in this table that has a pmCapabilitiesOverrideState
+         of valid should be treated as though it appeared in the
+         pmCapabilitiesTable.  If the entry also exists in the
+         pmCapabilitiesTable in the pmCapabilitiesType object, and if
+         the value of this object is valid, then the system shall
+         operate as though this entry did not exist and policy
+         installations and executions will continue in a normal
+         fashion."
+    ::= { pmCapabilitiesOverrideEntry 2 }
+
+pmCapabilitiesOverrideRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "The row status of this pmCapabilitiesOverrideEntry.
+
+         If the value of this object is active, no object in this row
+         may be modified."
+    ::= { pmCapabilitiesOverrideEntry 3 }
+
+-- The Schedule Group
+
+pmSchedLocalTime OBJECT-TYPE
+    SYNTAX      DateAndTime (SIZE (11))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The local time used by the scheduler.  Schedules that
+         refer to calendar time will use the local time indicated
+         by this object.  An implementation MUST return all 11 bytes
+         of the DateAndTime textual-convention so that a manager
+         may retrieve the offset from GMT time."
+    ::= { pmMib 7 }
+
+--
+-- The schedule table that controls the scheduler.
+--
+
+pmSchedTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmSchedEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines schedules for policies."
+    ::= { pmMib 8 }
+
+pmSchedEntry OBJECT-TYPE
+    SYNTAX      PmSchedEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular schedule.
+
+        Unless noted otherwise, writable objects of this row can be
+        modified independently of the current value of pmSchedRowStatus,
+        pmSchedAdminStatus and pmSchedOperStatus.  In particular, it
+        is legal to modify pmSchedWeekDay, pmSchedMonth, and
+        pmSchedDay when pmSchedRowStatus is active."
+    INDEX { pmSchedIndex }
+    ::= { pmSchedTable 1 }
+
+PmSchedEntry ::= SEQUENCE {
+    pmSchedIndex          Unsigned32,
+    pmSchedGroupIndex     Unsigned32,
+    pmSchedDescr          PmUTF8String,
+    pmSchedTimePeriod     PmUTF8String,
+    pmSchedMonth          BITS,
+    pmSchedDay            BITS,
+    pmSchedWeekDay        BITS,
+    pmSchedTimeOfDay      PmUTF8String,
+    pmSchedLocalOrUtc     INTEGER,
+    pmSchedStorageType    StorageType,
+    pmSchedRowStatus      RowStatus
+}
+
+pmSchedIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally unique, administratively assigned index for this
+        scheduling entry."
+    ::= { pmSchedEntry 1 }
+
+pmSchedGroupIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The locally unique, administratively assigned index for the
+        schedule group this scheduling entry belongs to.
+
+        To assign multiple schedule entries to the same group, the
+        pmSchedGroupIndex of each entry in the group will be set to
+        the same value.  This pmSchedGroupIndex value must be equal to
+        the pmSchedIndex of one of the entries in the group.  If the
+        entry whose pmSchedIndex equals the pmSchedGroupIndex
+        for the group is deleted, the agent will assign a new
+        pmSchedGroupIndex to all remaining members of the group.
+
+        If an entry is not a member of a group, its pmSchedGroupIndex
+        must be assigned to the value of its pmSchedIndex.
+
+        Policies that are controlled by a group of schedule entries
+        are active when any schedule in the group is active."
+    ::= { pmSchedEntry 2 }
+
+pmSchedDescr OBJECT-TYPE
+    SYNTAX      PmUTF8String
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The human-readable description of the purpose of this
+        scheduling entry."
+    DEFVAL { ''H }
+    ::= { pmSchedEntry 3 }
+
+pmSchedTimePeriod OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..31))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The overall range of calendar dates and times over which this
+        schedule is active.  It is stored in a slightly extended version
+        of the format for a 'period-explicit' defined in RFC 2445.
+        This format is expressed as a string representing the
+        starting date and time, in which the character 'T' indicates
+        the beginning of the time portion, followed by the solidus
+        character, '/', followed by a similar string representing an
+        end date and time.  The start of the period MUST be before the
+        end of the period.  Date-Time values are expressed as
+        substrings of the form 'yyyymmddThhmmss'.  For example:
+
+            20000101T080000/20000131T130000
+
+              January 1, 2000, 0800 through January 31, 2000, 1PM
+
+        The 'Date with UTC time' format defined in RFC 2445 in which
+        the Date-Time string ends with the character 'Z' is not
+        allowed.
+
+        This 'period-explicit' format is also extended to allow two
+        special cases in which one of the Date-Time strings is
+        replaced with a special string defined in RFC 2445:
+
+        1. If the first Date-Time value is replaced with the string
+           'THISANDPRIOR', then the value indicates that the schedule
+           is active at any time prior to the Date-Time that appears
+           after the '/'.
+
+        2. If the second Date-Time is replaced with the string
+           'THISANDFUTURE', then the value indicates that the schedule
+           is active at any time after the Date-Time that appears
+           before the '/'.
+
+        Note that although RFC 2445 defines these two strings, they are
+        not specified for use in the 'period-explicit' format.  The use
+        of these strings represents an extension to the
+        'period-explicit' format."
+    ::= { pmSchedEntry 4 }
+
+pmSchedMonth OBJECT-TYPE
+    SYNTAX      BITS {
+                    january(0),
+                    february(1),
+                    march(2),
+                    april(3),
+                    may(4),
+                    june(5),
+                    july(6),
+                    august(7),
+                    september(8),
+                    october(9),
+                    november(10),
+                    december(11)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Within the overall time period specified in the
+        pmSchedTimePeriod object, the value of this object specifies
+        the specific months within that time period when the schedule
+        is active.  Setting all bits will cause the schedule to act
+        independently of the month."
+    DEFVAL { { january, february, march, april, may, june, july,
+               august, september, october, november, december } }
+    ::= { pmSchedEntry 5 }
+
+pmSchedDay OBJECT-TYPE
+    SYNTAX      BITS {
+                    d1(0),   d2(1),   d3(2),   d4(3),   d5(4),
+                    d6(5),   d7(6),   d8(7),   d9(8),   d10(9),
+                    d11(10), d12(11), d13(12), d14(13), d15(14),
+                    d16(15), d17(16), d18(17), d19(18), d20(19),
+                    d21(20), d22(21), d23(22), d24(23), d25(24),
+                    d26(25), d27(26), d28(27), d29(28), d30(29),
+                    d31(30),
+                    r1(31),  r2(32),  r3(33),  r4(34),  r5(35),
+                    r6(36),  r7(37),  r8(38),  r9(39),  r10(40),
+                    r11(41), r12(42), r13(43), r14(44), r15(45),
+                    r16(46), r17(47), r18(48), r19(49), r20(50),
+                    r21(51), r22(52), r23(53), r24(54), r25(55),
+                    r26(56), r27(57), r28(58), r29(59), r30(60),
+                    r31(61)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Within the overall time period specified in the
+        pmSchedTimePeriod object, the value of this object specifies
+        the specific days of the month within that time period when
+        the schedule is active.
+
+        There are two sets of bits one can use to define the day
+        within a month:
+
+        Enumerations starting with the letter 'd' indicate a
+        day in a month relative to the first day of a month.
+        The first day of the month can therefore be specified
+        by setting the bit d1(0), and d31(30) means the last
+        day of a month with 31 days.
+
+        Enumerations starting with the letter 'r' indicate a
+        day in a month in reverse order, relative to the last
+        day of a month.  The last day in the month can therefore
+        be specified by setting the bit r1(31), and r31(61) means
+        the first day of a month with 31 days.
+
+        Setting multiple bits will include several days in the set
+        of possible days for this schedule.  Setting all bits starting
+        with the letter 'd' or all bits starting with the letter 'r'
+        will cause the schedule to act independently of the day of the
+        month."
+    DEFVAL { {  d1, d2, d3, d4, d5, d6, d7, d8, d9, d10,
+                d11, d12, d13, d14, d15, d16, d17, d18, d19, d20,
+                d21, d22, d23, d24, d25, d26, d27, d28, d29, d30,
+                d31, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10,
+                r11, r12, r13, r14, r15, r16, r17, r18, r19, r20,
+                r21, r22, r23, r24, r25, r26, r27, r28, r29, r30,
+                r31 } }
+    ::= { pmSchedEntry 6 }
+
+pmSchedWeekDay OBJECT-TYPE
+    SYNTAX      BITS {
+                    sunday(0),
+                    monday(1),
+                    tuesday(2),
+                    wednesday(3),
+                    thursday(4),
+                    friday(5),
+                    saturday(6)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Within the overall time period specified in the
+        pmSchedTimePeriod object, the value of this object specifies
+        the specific days of the week within that time period when
+        the schedule is active.  Setting all bits will cause the
+        schedule to act independently of the day of the week."
+    DEFVAL { { sunday, monday, tuesday, wednesday, thursday,
+               friday, saturday } }
+    ::= { pmSchedEntry 7 }
+
+pmSchedTimeOfDay OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..15))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Within the overall time period specified in the
+        pmSchedTimePeriod object, the value of this object specifies
+        the range of times in a day when the schedule is active.
+
+        This value is stored in a format based on the RFC 2445 format
+        for 'time': The character 'T' followed by a 'time' string,
+        followed by the solidus character, '/', followed by the
+        character 'T', followed by a second time string.  The first time
+        indicates the beginning of the range, and the second time
+        indicates the end.  Thus, this value takes the following
+        form:
+
+            'Thhmmss/Thhmmss'.
+
+        The second substring always identifies a later time than the
+        first substring.  To allow for ranges that span midnight,
+        however, the value of the second string may be smaller than
+        the value of the first substring.  Thus, 'T080000/T210000'
+        identifies the range from 0800 until 2100, whereas
+        'T210000/T080000' identifies the range from 2100 until 0800 of
+        the following day.
+
+        When a range spans midnight, by definition it includes parts
+        of two successive days.  When one of these days is also
+        selected by either the MonthOfYearMask, DayOfMonthMask, and/or
+        DayOfWeekMask, but the other day is not, then the policy is
+        active only during the portion of the range that falls on the
+        selected day.  For example, if the range extends from 2100
+
+        until 0800, and the day of week mask selects Monday and
+        Tuesday, then the policy is active during the following three
+        intervals:
+
+            From midnight Sunday until 0800 Monday
+            From 2100 Monday until 0800 Tuesday
+            From 2100 Tuesday until 23:59:59 Tuesday
+
+         Setting this value to 'T000000/T235959' will cause the
+         schedule to act independently of the time of day."
+    DEFVAL { '543030303030302F54323335393539'H } -- T000000/T235959
+    ::= { pmSchedEntry 8 }
+
+pmSchedLocalOrUtc OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    localTime(1),
+                    utcTime(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates whether the times represented in the
+        TimePeriod object and in the various Mask objects represent
+        local times or UTC times."
+    DEFVAL { utcTime }
+    ::= { pmSchedEntry 9 }
+
+pmSchedStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines whether this schedule entry is kept
+         in volatile storage and lost upon reboot or
+         backed up by non-volatile or permanent storage.
+
+         Conceptual rows having the value 'permanent' must allow write
+         access to the columnar objects pmSchedDescr, pmSchedWeekDay,
+         pmSchedMonth, and pmSchedDay.
+
+         If the value of this object is 'permanent', no values in the
+         associated row have to be writable."
+    DEFVAL { volatile }
+    ::= { pmSchedEntry 10 }
+
+pmSchedRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this schedule entry.
+
+         If the value of this object is active, no object in this row
+         may be modified."
+    ::= { pmSchedEntry 11 }
+
+-- Policy Tracking
+
+-- The "policy to element" (PE) table and the "element to policy" (EP)
+-- table track the status of execution contexts grouped by policy and
+-- element respectively.
+
+pmTrackingPETable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmTrackingPEEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The pmTrackingPETable describes what elements
+         are active (under control of) a policy.  This table is indexed
+         in order to optimize retrieval of the entire status for a
+         given policy."
+    ::= { pmMib 9 }
+
+pmTrackingPEEntry OBJECT-TYPE
+    SYNTAX      PmTrackingPEEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "An entry in the pmTrackingPETable.  The pmPolicyIndex in
+         the index specifies the policy tracked by this entry.
+
+         Note that some combinations of index values may result in an
+         instance name that exceeds a length of 128 sub-identifiers,
+         which exceeds the maximum for the SNMP
+         protocol.  Implementations should take care to avoid such
+         combinations."
+    INDEX       { pmPolicyIndex, pmTrackingPEElement,
+                  pmTrackingPEContextName, pmTrackingPEContextEngineID }
+    ::= { pmTrackingPETable 1 }
+
+PmTrackingPEEntry ::= SEQUENCE {
+    pmTrackingPEElement          RowPointer,
+    pmTrackingPEContextName      SnmpAdminString,
+    pmTrackingPEContextEngineID  OCTET STRING,
+    pmTrackingPEInfo             BITS
+}
+
+pmTrackingPEElement OBJECT-TYPE
+    SYNTAX      RowPointer
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The element that is acted upon by the associated policy.
+
+         As this object is used in the index for the
+         pmTrackingPETable, users of this table should be careful not
+         to create entries that would result in instance names with
+         more than 128 sub-identifiers."
+    ::= { pmTrackingPEEntry 1 }
+
+pmTrackingPEContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is not in the default SNMP context
+        for the target system, this object is used to identify the
+        context.  If the element is in the default context, this object
+        is equal to the empty string."
+    ::= { pmTrackingPEEntry 2 }
+
+pmTrackingPEContextEngineID OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is on a remote system, this object
+        is used to identify the remote system.  This object contains
+        the contextEngineID of the system on which the associated
+        element resides.  If the element is on the local system,
+        this object will be the empty string."
+    ::= { pmTrackingPEEntry 3 }
+
+pmTrackingPEInfo OBJECT-TYPE
+    SYNTAX      BITS {
+                    actionSkippedDueToPrecedence(0),
+                    conditionRunTimeException(1),
+                    conditionUserSignal(2),
+                    actionRunTimeException(3),
+                    actionUserSignal(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "This object returns information about the previous policy
+         script executions.
+
+         If the actionSkippedDueToPrecedence(1) bit is set, the last
+         execution of the associated policy condition returned non-zero,
+         but the action is not active, because it was trumped by a
+         matching policy condition in the same precedence group with a
+         higher precedence value.
+
+         If the conditionRunTimeException(2) bit is set, the last
+         execution of the associated policy condition encountered a
+         run-time exception and aborted.
+
+         If the conditionUserSignal(3) bit is set, the last
+         execution of the associated policy condition called the
+         signalError() function.
+
+         If the actionRunTimeException(4) bit is set, the last
+         execution of the associated policy action encountered a
+         run-time exception and aborted.
+
+         If the actionUserSignal(5) bit is set, the last
+         execution of the associated policy action called the
+         signalError() function.
+
+         Entries will only exist in this table of one or more bits are
+         set.  In particular, if an entry does not exist for a
+         particular policy/element combination, it can be assumed that
+         the policy's condition did not match 'this element'."
+    ::= { pmTrackingPEEntry 4 }
+
+-- Element to Policy Table
+
+pmTrackingEPTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmTrackingEPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The pmTrackingEPTable describes what policies
+         are controlling an element.  This table is indexed in
+         order to optimize retrieval of the status of all policies
+         active for a given element."
+    ::= { pmMib 10 }
+
+pmTrackingEPEntry OBJECT-TYPE
+    SYNTAX      PmTrackingEPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "An entry in the pmTrackingEPTable.  Entries exist for all
+         element/policy combinations for which the policy's condition
+         matches and only if the schedule for the policy is active.
+
+         The pmPolicyIndex in the index specifies the policy
+         tracked by this entry.
+
+         Note that some combinations of index values may result in an
+         instance name that exceeds a length of 128 sub-identifiers,
+         which exceeds the maximum for the SNMP protocol.
+         Implementations should take care to avoid such combinations."
+    INDEX       { pmTrackingEPElement, pmTrackingEPContextName,
+                  pmTrackingEPContextEngineID, pmPolicyIndex }
+    ::= { pmTrackingEPTable 1 }
+
+PmTrackingEPEntry ::= SEQUENCE {
+    pmTrackingEPElement          RowPointer,
+    pmTrackingEPContextName      SnmpAdminString,
+    pmTrackingEPContextEngineID  OCTET STRING,
+    pmTrackingEPStatus           INTEGER
+}
+
+pmTrackingEPElement OBJECT-TYPE
+    SYNTAX      RowPointer
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The element acted upon by the associated policy.
+
+         As this object is used in the index for the
+         pmTrackingEPTable, users of this table should be careful
+         not to create entries that would result in instance names
+         with more than 128 sub-identifiers."
+    ::= { pmTrackingEPEntry 1 }
+
+pmTrackingEPContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is not in the default SNMP context
+
+        for the target system, this object is used to identify the
+        context.  If the element is in the default context, this object
+        is equal to the empty string."
+    ::= { pmTrackingEPEntry 2 }
+
+pmTrackingEPContextEngineID OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is on a remote system, this object
+        is used to identify the remote system.  This object contains
+        the contextEngineID of the system on which the associated
+        element resides.  If the element is on the local system,
+        this object will be the empty string."
+    ::= { pmTrackingEPEntry 3 }
+
+pmTrackingEPStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    on(1),
+                    forceOff(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+         "This entry will only exist if the calendar for the policy is
+         active and if the associated policyCondition returned 1 for
+         'this element'.
+
+         A policy can be forcibly disabled on a particular element
+         by setting this value to forceOff(2).  The agent should then
+         act as though the policyCondition failed for 'this element'.
+         The forceOff(2) state will persist (even across reboots) until
+         this value is set to on(1) by a management request.  The
+         forceOff(2) state may be set even if the entry does not
+         previously exist so that future policy invocations can be
+         avoided.
+
+         Unless forcibly disabled, if this entry exists, its value
+         will be on(1)."
+    ::= { pmTrackingEPEntry 4 }
+
+-- Policy Debugging Table
+
+pmDebuggingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PmDebuggingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "Policies that have debugging turned on will generate a log
+         entry in the policy debugging table for every runtime
+         exception that occurs in either the condition or action
+         code.
+
+         The pmDebuggingTable logs debugging messages when
+         policies experience run-time exceptions in either the condition
+         or action code and the associated pmPolicyDebugging object
+         has been turned on.
+
+         The maximum number of debugging entries that will be stored
+         and the maximum length of time an entry will be kept are an
+         implementation-dependent manner.  If entries must
+         be discarded to make room for new entries, the oldest entries
+         must be discarded first.
+
+         If the system restarts, all debugging entries may be deleted."
+    ::= { pmMib 11 }
+
+pmDebuggingEntry OBJECT-TYPE
+    SYNTAX      PmDebuggingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "An entry in the pmDebuggingTable.  The pmPolicyIndex in the
+         index specifies the policy that encountered the exception
+         that led to this log entry.
+
+         Note that some combinations of index values may result in an
+         instance name that exceeds a length of 128 sub-identifiers,
+         which exceeds the maximum for the SNMP protocol.
+         Implementations should take care to avoid such combinations."
+    INDEX       { pmPolicyIndex, pmDebuggingElement,
+                  pmDebuggingContextName, pmDebuggingContextEngineID,
+                  pmDebuggingLogIndex }
+    ::= { pmDebuggingTable 1 }
+
+PmDebuggingEntry ::= SEQUENCE {
+    pmDebuggingElement          RowPointer,
+    pmDebuggingContextName      SnmpAdminString,
+    pmDebuggingContextEngineID  OCTET STRING,
+    pmDebuggingLogIndex         Unsigned32,
+    pmDebuggingMessage          PmUTF8String
+}
+
+pmDebuggingElement OBJECT-TYPE
+    SYNTAX      RowPointer
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The element the policy was executing on when it encountered
+         the error that led to this log entry.
+
+         For example, if the element is interface 3, then this object
+         will contain the OID for 'ifIndex.3'.
+
+         As this object is used in the index for the
+         pmDebuggingTable, users of this table should be careful
+         not to create entries that would result in instance names
+         with more than 128 sub-identifiers."
+    ::= { pmDebuggingEntry 1 }
+
+pmDebuggingContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is not in the default SNMP context
+        for the target system, this object is used to identify the
+        context.  If the element is in the default context, this object
+        is equal to the empty string."
+    ::= { pmDebuggingEntry 2 }
+
+pmDebuggingContextEngineID OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0 | 5..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If the associated element is on a remote system, this object
+        is used to identify the remote system.  This object contains
+        the contextEngineID of the system on which the associated
+        element resides.  If the element is on the local system,
+        this object will be the empty string."
+    ::= { pmDebuggingEntry 3 }
+
+pmDebuggingLogIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A unique index for this log entry among other log entries
+         for this policy/element combination."
+    ::= { pmDebuggingEntry 4 }
+
+pmDebuggingMessage OBJECT-TYPE
+    SYNTAX      PmUTF8String (SIZE (0..128))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+         "An error message generated by the policy execution
+         environment.  It is recommended that this message include the
+         time of day when the message was generated, if known."
+    ::= { pmDebuggingEntry 5 }
+
+-- Notifications
+
+pmNotifications OBJECT IDENTIFIER ::= { pmMib 0 }
+
+pmNewRoleNotification NOTIFICATION-TYPE
+    OBJECTS     { pmRoleStatus }
+    STATUS      current
+    DESCRIPTION
+        "The pmNewRoleNotification is sent when an agent is configured
+        with its first instance of a previously unused role string
+        (not every time a new element is given a particular role).
+
+        An instance of the pmRoleStatus object is sent containing
+        the new roleString in its index.  In the event that two or
+        more elements are given the same role simultaneously, it is an
+        implementation-dependent matter as to which pmRoleTable
+        instance will be included in the notification."
+    ::= { pmNotifications 1 }
+
+pmNewCapabilityNotification NOTIFICATION-TYPE
+    OBJECTS     { pmCapabilitiesType }
+    STATUS      current
+    DESCRIPTION
+        "The pmNewCapabilityNotification is sent when an agent
+        gains a new capability that did not previously exist in any
+        element on the system (not every time an element gains a
+        particular capability).
+
+        An instance of the pmCapabilitiesType object is sent containing
+        the identity of the new capability.  In the event that two or
+        more elements gain the same capability simultaneously, it is an
+        implementation-dependent matter as to which pmCapabilitiesType
+        instance will be included in the notification."
+    ::= { pmNotifications 2 }
+
+pmAbnormalTermNotification NOTIFICATION-TYPE
+    OBJECTS     { pmTrackingPEInfo }
+    STATUS      current
+    DESCRIPTION
+        "The pmAbnormalTermNotification is sent when a policy's
+        pmPolicyAbnormalTerminations gauge value changes from zero to
+        any value greater than zero and no such notification has been
+        sent for that policy in the last 5 minutes.
+
+        The notification contains an instance of the pmTrackingPEInfo
+        object where the pmPolicyIndex component of the index
+        identifies the associated policy and the rest of the index
+        identifies an element on which the policy failed."
+    ::= { pmNotifications 3 }
+
+-- Compliance Statements
+
+    pmConformance   OBJECT IDENTIFIER ::= { pmMib 12 }
+    pmCompliances   OBJECT IDENTIFIER ::= { pmConformance 1 }
+    pmGroups        OBJECT IDENTIFIER ::= { pmConformance 2 }
+
+pmCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the Policy-Based Management MIB"
+    MODULE  -- this module
+        MANDATORY-GROUPS { pmPolicyManagementGroup, pmSchedGroup,
+                           pmNotificationGroup }
+    ::= { pmCompliances 1 }
+
+pmPolicyManagementGroup OBJECT-GROUP
+    OBJECTS { pmPolicyPrecedenceGroup, pmPolicyPrecedence,
+              pmPolicySchedule, pmPolicyElementTypeFilter,
+              pmPolicyConditionScriptIndex, pmPolicyActionScriptIndex,
+              pmPolicyParameters,
+              pmPolicyConditionMaxLatency, pmPolicyActionMaxLatency,
+              pmPolicyMaxIterations,
+              pmPolicyDescription, pmPolicyMatches,
+              pmPolicyAbnormalTerminations,
+              pmPolicyExecutionErrors, pmPolicyDebugging,
+              pmPolicyStorageType, pmPolicyAdminStatus,
+              pmPolicyRowStatus, pmPolicyCodeText, pmPolicyCodeStatus,
+              pmElementTypeRegMaxLatency, pmElementTypeRegDescription,
+              pmElementTypeRegStorageType, pmElementTypeRegRowStatus,
+              pmRoleStatus,
+              pmCapabilitiesType, pmCapabilitiesOverrideState,
+              pmCapabilitiesOverrideRowStatus,
+              pmTrackingPEInfo,
+              pmTrackingEPStatus,
+              pmDebuggingMessage }
+    STATUS  current
+    DESCRIPTION
+        "Objects that allow for the creation and management of
+        configuration policies."
+    ::=  { pmGroups 1 }
+
+pmSchedGroup OBJECT-GROUP
+    OBJECTS { pmSchedLocalTime, pmSchedGroupIndex,
+              pmSchedDescr, pmSchedTimePeriod,
+              pmSchedMonth, pmSchedDay, pmSchedWeekDay,
+              pmSchedTimeOfDay, pmSchedLocalOrUtc, pmSchedStorageType,
+              pmSchedRowStatus
+            }
+    STATUS current
+    DESCRIPTION
+        "Objects that allow for the scheduling of policies."
+    ::= { pmGroups 2 }
+
+pmNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { pmNewRoleNotification,
+                    pmNewCapabilityNotification,
+                    pmAbnormalTermNotification }
+    STATUS        current
+    DESCRIPTION
+        "Notifications sent by an Policy MIB agent."
+    ::= { pmGroups 3 }
+
+pmBaseFunctionLibrary OBJECT IDENTIFIER ::= { pmGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/POWER-ETHERNET-MIB.mib b/snmp_builder/mibs/POWER-ETHERNET-MIB.mib
new file mode 100644
index 0000000..b6758d1
--- /dev/null
+++ b/snmp_builder/mibs/POWER-ETHERNET-MIB.mib
@@ -0,0 +1,621 @@
+POWER-ETHERNET-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+           MODULE-IDENTITY, mib-2, OBJECT-TYPE, Integer32,
+           Gauge32, Counter32, NOTIFICATION-TYPE
+                   FROM SNMPv2-SMI
+           TruthValue
+                   FROM SNMPv2-TC
+           MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                   FROM SNMPv2-CONF
+
+            SnmpAdminString
+                    FROM SNMP-FRAMEWORK-MIB;
+
+    powerEthernetMIB MODULE-IDENTITY
+
+         LAST-UPDATED    "200311240000Z"  -- November 24, 2003
+         ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
+                       Working Group"
+
+         CONTACT-INFO
+         "
+          WG Charter:
+          http://www.ietf.org/html.charters/hubmib-charter.html
+
+         Mailing lists:
+          General Discussion: hubmib@ietf.org
+          To Subscribe: hubmib-requests@ietf.org
+          In Body: subscribe your_email_address
+
+         Chair: Dan Romascanu
+          Avaya
+          Tel:  +972-3-645-8414
+          Email: dromasca@avaya.com
+
+         Editor: Avi Berger
+          PowerDsine Inc.
+          Tel:    972-9-7755100 Ext 307
+          Fax:    972-9-7755120
+          E-mail: avib@PowerDsine.com
+         "
+        DESCRIPTION
+              "The MIB module for managing Power Source Equipment
+               (PSE) working according to the IEEE 802.af Powered
+               Ethernet (DTE Power via MDI) standard.
+
+                The following terms are used throughout this
+                MIB module.  For complete formal definitions,
+                the IEEE 802.3 standards should be consulted
+                wherever possible:
+
+                Group - A recommended, but optional, entity
+                defined by the IEEE 802.3 management standard,
+                in order to support a modular numbering scheme.
+                The classical example allows an implementor to
+                represent field-replaceable units as groups of
+                ports, with the port numbering matching the
+                modular hardware implementation.
+
+              Port - This entity identifies the port within the group
+              for which this entry contains information.  The numbering
+              scheme for ports is implementation specific.
+
+             Copyright (c) The Internet Society (2003).  This version
+             of this MIB module is part of RFC 3621; See the RFC
+             itself for full legal notices."
+
+       REVISION    "200311240000Z"  -- November 24, 2003
+       DESCRIPTION "Initial version, published as RFC 3621."
+       ::= { mib-2 105 }
+
+pethNotifications OBJECT IDENTIFIER ::= { powerEthernetMIB 0 }
+pethObjects       OBJECT IDENTIFIER ::= { powerEthernetMIB 1 }
+pethConformance   OBJECT IDENTIFIER ::= { powerEthernetMIB 2 }
+
+-- PSE Objects
+
+  pethPsePortTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF PethPsePortEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A table of objects that display and control the power
+            characteristics of power Ethernet ports on a Power Source
+            Entity (PSE) device.  This group will be implemented in
+            managed power Ethernet switches and mid-span devices.
+            Values of all read-write objects in this table are
+            persistent at restart/reboot."
+       ::= { pethObjects 1 }
+
+   pethPsePortEntry OBJECT-TYPE
+       SYNTAX      PethPsePortEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A set of objects that display and control the power
+               characteristics of a power Ethernet PSE port."
+       INDEX    { pethPsePortGroupIndex , pethPsePortIndex  }
+       ::= { pethPsePortTable 1 }
+
+   PethPsePortEntry ::= SEQUENCE {
+       pethPsePortGroupIndex
+          Integer32,
+       pethPsePortIndex
+          Integer32,
+       pethPsePortAdminEnable
+          TruthValue,
+       pethPsePortPowerPairsControlAbility
+          TruthValue,
+       pethPsePortPowerPairs
+          INTEGER,
+       pethPsePortDetectionStatus
+          INTEGER,
+       pethPsePortPowerPriority
+          INTEGER,
+       pethPsePortMPSAbsentCounter
+          Counter32,
+       pethPsePortType
+          SnmpAdminString,
+       pethPsePortPowerClassifications
+          INTEGER,
+       pethPsePortInvalidSignatureCounter
+          Counter32,
+       pethPsePortPowerDeniedCounter
+          Counter32,
+       pethPsePortOverLoadCounter
+          Counter32,
+       pethPsePortShortCounter
+          Counter32
+  }
+
+     pethPsePortGroupIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "This variable uniquely identifies the group
+            containing the port to which a power Ethernet PSE is
+            connected.  Group means box in the stack, module in a
+            rack and the value 1 MUST be used for non-modular devices.
+            Furthermore, the same value MUST be used in this variable,
+            pethMainPseGroupIndex, and pethNotificationControlGroupIndex
+            to refer to a given box in a stack or module in the rack."
+       ::= { pethPsePortEntry 1 }
+
+     pethPsePortIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "This variable uniquely identifies the power Ethernet PSE
+            port within group pethPsePortGroupIndex to which the
+            power Ethernet PSE entry is connected."
+       ::= { pethPsePortEntry 2 }
+
+     pethPsePortAdminEnable OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "true (1) An interface which can provide the PSE functions.
+         false(2) The interface will act as it would if it had no PSE
+         function."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.2 aPSEAdminState"
+    ::= { pethPsePortEntry 3 }
+
+     pethPsePortPowerPairsControlAbility OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Describes the capability of controlling the power pairs
+         functionality to switch pins for sourcing power.
+         The value true indicate that the device has the capability
+         to control the power pairs.  When false the PSE Pinout
+         Alternative used cannot be controlled through the
+         PethPsePortAdminEnable attribute."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.3
+       aPSEPowerPairsControlAbility"
+    ::= { pethPsePortEntry 4 }
+
+    pethPsePortPowerPairs OBJECT-TYPE
+    SYNTAX INTEGER   {
+               signal(1),
+               spare(2)
+     }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "Describes or controls the pairs in use.  If the value of
+         pethPsePortPowerPairsControl is true, this object is
+         writable.
+         A value of signal(1) means that the signal pairs
+         only are in use.
+         A value of spare(2) means that the spare pairs
+         only are in use."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.4 aPSEPowerPairs"
+    ::= { pethPsePortEntry 5 }
+
+     pethPsePortDetectionStatus OBJECT-TYPE
+    SYNTAX INTEGER   {
+             disabled(1),
+             searching(2),
+               deliveringPower(3),
+               fault(4),
+               test(5),
+               otherFault(6)
+     }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Describes the operational status of the port PD detection.
+         A value of disabled(1)- indicates that the PSE State diagram
+         is in the state DISABLED.
+         A value of deliveringPower(3) - indicates that the PSE State
+         diagram is in the state POWER_ON for a duration greater than
+         tlim max (see IEEE Std 802.3af Table 33-5 tlim).
+         A value of fault(4) - indicates that the PSE State diagram is
+         in the state TEST_ERROR.
+         A value of test(5) - indicates that the PSE State diagram is
+         in the state TEST_MODE.
+         A value of otherFault(6) - indicates that the PSE State
+         diagram is in the state IDLE due to the variable
+         error_conditions.
+         A value of searching(2)- indicates the PSE State diagram is
+         in a state other than those listed above."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.5
+       aPSEPowerDetectionStatus"
+    ::= { pethPsePortEntry 6 }
+
+     pethPsePortPowerPriority OBJECT-TYPE
+    SYNTAX INTEGER   {
+               critical(1),
+               high(2),
+               low(3)
+     }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object controls the priority of the port from the point
+         of view of a power management algorithm.  The priority that
+         is set by this variable could be used by a control mechanism
+         that prevents over current situations by disconnecting first
+         ports with lower power priority.  Ports that connect devices
+         critical to the operation of the network - like the E911
+         telephones ports - should be set to higher priority."
+    ::= { pethPsePortEntry 7 }
+
+   pethPsePortMPSAbsentCounter OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+          "This counter is incremented when the PSE state diagram
+             transitions directly from the state POWER_ON to the
+
+             state IDLE due to tmpdo_timer_done being asserted."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.11
+       aPSEMPSAbsentCounter"
+    ::= { pethPsePortEntry 8 }
+
+   pethPsePortType OBJECT-TYPE
+    SYNTAX SnmpAdminString
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "A manager will set the value of this variable to indicate
+         the type of powered device that is connected to the port.
+         The default value supplied by the agent if no value has
+         ever been set should be a zero-length octet string."
+    ::= { pethPsePortEntry 9 }
+
+    pethPsePortPowerClassifications OBJECT-TYPE
+     SYNTAX INTEGER   {
+               class0(1),
+               class1(2),
+               class2(3),
+               class3(4),
+               class4(5)
+     }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Classification is a way to tag different terminals on the
+        Power over LAN network according to their power consumption.
+        Devices such as IP telephones, WLAN access points and others,
+        will be classified according to their power requirements.
+
+        The meaning of the classification labels is defined in the
+        IEEE specification.
+
+       This variable is valid only while a PD is being powered,
+        that is, while the attribute pethPsePortDetectionStatus
+        is reporting the enumeration deliveringPower."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.6
+       aPSEPowerClassification"
+   ::= { pethPsePortEntry 10 }
+
+   pethPsePortInvalidSignatureCounter OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+       "This counter is incremented when the PSE state diagram
+         enters the state SIGNATURE_INVALID."
+    REFERENCE
+          "IEEE Std 802.3af Section 30.9.1.1.7
+           aPSEInvalidSignatureCounter"
+    ::= { pethPsePortEntry 11 }
+
+   pethPsePortPowerDeniedCounter OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+          "This counter is incremented when the PSE state diagram
+             enters the state POWER_DENIED."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.8
+       aPSEPowerDeniedCounter"
+    ::= { pethPsePortEntry 12 }
+
+   pethPsePortOverLoadCounter OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+          "This counter is incremented when the PSE state diagram
+             enters the state ERROR_DELAY_OVER."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.9
+       aPSEOverLoadCounter"
+    ::= { pethPsePortEntry 13 }
+
+   pethPsePortShortCounter OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+          "This counter is incremented when the PSE state diagram
+             enters the state ERROR_DELAY_SHORT."
+    REFERENCE
+      "IEEE Std 802.3af Section 30.9.1.1.10
+       aPSEShortCounter"
+    ::= { pethPsePortEntry 14 }
+
+-- Main PSE Objects
+
+pethMainPseObjects       OBJECT IDENTIFIER ::= { pethObjects 3 }
+
+pethMainPseTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF PethMainPseEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A table of objects that display and control attributes
+            of the main power source in a PSE  device.  Ethernet
+            switches are one example of boxes that would support
+            these objects.
+            Values of all read-write objects in this table are
+            persistent at restart/reboot."
+       ::= { pethMainPseObjects 1 }
+
+   pethMainPseEntry OBJECT-TYPE
+       SYNTAX      PethMainPseEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+            "A set of objects that display and control the Main
+             power of a PSE. "
+       INDEX    { pethMainPseGroupIndex }
+       ::= { pethMainPseTable 1 }
+
+   PethMainPseEntry ::= SEQUENCE {
+       pethMainPseGroupIndex
+           Integer32,
+       pethMainPsePower
+           Gauge32 ,
+       pethMainPseOperStatus
+           INTEGER,
+       pethMainPseConsumptionPower
+           Gauge32,
+       pethMainPseUsageThreshold
+           Integer32
+   }
+     pethMainPseGroupIndex OBJECT-TYPE
+       SYNTAX       Integer32 (1..2147483647)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "This variable uniquely identifies the group to which
+           power Ethernet PSE is connected.  Group means (box in
+           the stack, module in a rack) and the value 1 MUST be
+           used for non-modular devices.  Furthermore, the same
+           value MUST be used in this variable, pethPsePortGroupIndex,
+           and pethNotificationControlGroupIndex to refer to a
+           given box in a stack or module in a rack."
+       ::= { pethMainPseEntry 1 }
+
+     pethMainPsePower OBJECT-TYPE
+       SYNTAX      Gauge32  (1..65535)
+       UNITS      "Watts"
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The nominal power of the PSE expressed in Watts."
+       ::= { pethMainPseEntry 2 }
+
+     pethMainPseOperStatus OBJECT-TYPE
+       SYNTAX INTEGER   {
+               on(1),
+               off(2),
+               faulty(3)
+          }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The operational status of the main PSE."
+       ::= { pethMainPseEntry 3 }
+
+     pethMainPseConsumptionPower OBJECT-TYPE
+       SYNTAX      Gauge32
+       UNITS      "Watts"
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "Measured usage power expressed in Watts."
+       ::= { pethMainPseEntry 4 }
+
+     pethMainPseUsageThreshold OBJECT-TYPE
+       SYNTAX      Integer32  (1..99)
+       UNITS      "%"
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+               "The usage threshold expressed in percents for
+                comparing the measured power and initiating
+                an alarm if the threshold is exceeded."
+       ::= { pethMainPseEntry 5 }
+
+-- Notification  Control  Objects
+
+pethNotificationControl        OBJECT IDENTIFIER ::= { pethObjects 4 }
+
+pethNotificationControlTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF PethNotificationControlEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A table of objects that display and control the
+            Notification on a PSE  device.
+            Values of all read-write objects in this table are
+            persistent at restart/reboot."
+       ::= { pethNotificationControl 1 }
+
+   pethNotificationControlEntry OBJECT-TYPE
+       SYNTAX      PethNotificationControlEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+            "A set of objects that control the Notification events."
+       INDEX    { pethNotificationControlGroupIndex }
+       ::= { pethNotificationControlTable 1 }
+
+   PethNotificationControlEntry ::= SEQUENCE {
+       pethNotificationControlGroupIndex
+           Integer32,
+       pethNotificationControlEnable
+           TruthValue
+   }
+     pethNotificationControlGroupIndex OBJECT-TYPE
+       SYNTAX      Integer32 (1..2147483647)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "This variable uniquely identifies the group.  Group
+            means box in the stack, module in a rack and the value
+            1 MUST be used for non-modular devices.  Furthermore,
+            the same value MUST be used in this variable,
+            pethPsePortGroupIndex, and
+            pethMainPseGroupIndex to refer to a given box in a
+            stack or module in a rack. "
+       ::= { pethNotificationControlEntry 1 }
+
+      pethNotificationControlEnable  OBJECT-TYPE
+       SYNTAX             TruthValue
+       MAX-ACCESS         read-write
+       STATUS             current
+       DESCRIPTION
+          "This object controls, on a per-group basis, whether
+             or not notifications from the agent are enabled.  The
+             value true(1) means that notifications are enabled; the
+             value false(2) means that they are not."
+       ::= { pethNotificationControlEntry 2 }
+
+--
+-- Notifications Section
+--
+--
+
+     pethPsePortOnOffNotification NOTIFICATION-TYPE
+         OBJECTS     { pethPsePortDetectionStatus }
+         STATUS      current
+         DESCRIPTION
+             " This Notification indicates if Pse Port is delivering or
+               not power to the PD.  This Notification SHOULD be sent on
+               every status change except in the searching mode.
+               At least 500 msec must elapse between notifications
+               being emitted by the same object instance."
+          ::= { pethNotifications 1 }
+
+     pethMainPowerUsageOnNotification NOTIFICATION-TYPE
+         OBJECTS     { pethMainPseConsumptionPower  }
+         STATUS      current
+         DESCRIPTION
+           " This Notification indicate PSE Threshold usage
+               indication is on, the usage power is above the
+               threshold.  At least 500 msec must elapse between
+               notifications being emitted by the same object
+               instance."
+         ::= { pethNotifications 2 }
+
+      pethMainPowerUsageOffNotification NOTIFICATION-TYPE
+         OBJECTS     { pethMainPseConsumptionPower }
+         STATUS      current
+         DESCRIPTION
+           " This Notification indicates PSE Threshold usage indication
+               off, the usage power is below the threshold.
+               At least 500 msec must elapse between notifications being
+               emitted by the same object instance."
+         ::= { pethNotifications 3 }
+
+--
+-- Conformance Section
+--
+pethCompliances OBJECT IDENTIFIER ::= { pethConformance 1 }
+pethGroups      OBJECT IDENTIFIER ::= { pethConformance 2 }
+
+pethCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "Describes the requirements for conformance to the
+               Power Ethernet MIB."
+
+       MODULE  -- this module
+           MANDATORY-GROUPS { pethPsePortGroup,
+                              pethPsePortNotificationGroup,
+                              pethNotificationControlGroup
+                            }
+           GROUP   pethMainPseGroup
+           DESCRIPTION
+               "The pethMainPseGroup is mandatory for PSE systems
+                that implement a main power supply."
+           GROUP   pethMainPowerNotificationGroup
+           DESCRIPTION
+               "The pethMainPowerNotificationGroup is mandatory for
+               PSE systems that implement a main power supply."
+       ::= { pethCompliances 1 }
+
+pethPsePortGroup OBJECT-GROUP
+    OBJECTS {
+       pethPsePortAdminEnable,
+       pethPsePortPowerPairsControlAbility,
+       pethPsePortPowerPairs,
+       pethPsePortDetectionStatus,
+       pethPsePortPowerPriority,
+       pethPsePortMPSAbsentCounter,
+       pethPsePortInvalidSignatureCounter,
+       pethPsePortPowerDeniedCounter,
+       pethPsePortOverLoadCounter,
+       pethPsePortShortCounter,
+       pethPsePortType,
+       pethPsePortPowerClassifications
+    }
+    STATUS  current
+    DESCRIPTION
+          "PSE Port objects."
+    ::= { pethGroups 1 }
+
+pethMainPseGroup OBJECT-GROUP
+    OBJECTS {
+       pethMainPsePower,
+       pethMainPseOperStatus,
+       pethMainPseConsumptionPower,
+       pethMainPseUsageThreshold
+    }
+    STATUS  current
+    DESCRIPTION
+            "Main PSE Objects. "
+    ::= { pethGroups 2 }
+
+pethNotificationControlGroup OBJECT-GROUP
+
+    OBJECTS {
+       pethNotificationControlEnable
+    }
+    STATUS  current
+    DESCRIPTION
+            "Notification Control  Objects. "
+    ::= { pethGroups 3 }
+
+pethPsePortNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { pethPsePortOnOffNotification}
+    STATUS           current
+    DESCRIPTION  "Pse Port Notifications."
+    ::= { pethGroups 4 }
+
+  pethMainPowerNotificationGroup NOTIFICATION-GROUP
+     NOTIFICATIONS { pethMainPowerUsageOnNotification,
+                      pethMainPowerUsageOffNotification}
+    STATUS           current
+    DESCRIPTION  "Main PSE Notifications."
+      ::= { pethGroups 5 }
+
+END
diff --git a/snmp_builder/mibs/PPP-BRIDGE-NCP-MIB.mib b/snmp_builder/mibs/PPP-BRIDGE-NCP-MIB.mib
new file mode 100644
index 0000000..7dc3c7a
--- /dev/null
+++ b/snmp_builder/mibs/PPP-BRIDGE-NCP-MIB.mib
@@ -0,0 +1,429 @@
+PPP-BRIDGE-NCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     Counter
+          FROM RFC1155-SMI
+     ifIndex
+          FROM RFC1213-MIB
+     OBJECT-TYPE
+          FROM RFC-1212
+     ppp
+          FROM PPP-LCP-MIB;
+
+     pppBridge OBJECT IDENTIFIER ::= { ppp 4 }
+
+--
+-- The PPP Bridge NCP Group.
+-- Implementation of this group is mandatory for all
+-- PPP implementations that support MAC Bridging  over
+-- PPP (RFC1220).
+--
+
+-- The following object reflect the values of the option
+-- parameters used in the PPP Link Control Protocol
+--   pppBridgeLocalToRemoteTinygramCompression
+--   pppBridgeRemoteToLocalTinygramCompression
+--   pppBridgeLocalToRemoteLanId
+--   pppBridgeRemoteToLocalLanId
+--
+-- These values are not available until after the PPP Option
+
+-- negotiation has completed, which is indicated by the link
+-- reaching the open state (i.e. pppBridgeOperStatus is set to
+-- opened).
+--
+-- Therefore, when pppBridgeOperStatus is not opened
+-- the contents of these objects is undefined. The value
+-- returned when accessing the objects is an implementation
+-- dependent issue.
+
+pppBridgeTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppBridgeEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the parameters and statistics
+               for the local PPP entity that are related to
+               the operation of Bridging over the PPP."
+     ::= { pppBridge 1 }
+
+pppBridgeEntry   OBJECT-TYPE
+     SYNTAX    PppBridgeEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Bridging information for a particular PPP
+               link."
+     INDEX     { ifIndex }
+     ::= { pppBridgeTable 1 }
+
+PppBridgeEntry ::= SEQUENCE {
+     pppBridgeOperStatus
+          INTEGER,
+     pppBridgeLocalToRemoteTinygramCompression
+          INTEGER,
+     pppBridgeRemoteToLocalTinygramCompression
+          INTEGER,
+     pppBridgeLocalToRemoteLanId
+          INTEGER,
+     pppBridgeRemoteToLocalLanId
+          INTEGER
+}
+
+pppBridgeOperStatus   OBJECT-TYPE
+     SYNTAX    INTEGER {opened(1), not-opened(2)}
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The operational status of the Bridge network
+               protocol. If the value of this object is up
+               then the finite state machine for the Bridge
+               network protocol has reached the Opened state."
+     ::= { pppBridgeEntry 1 }
+
+pppBridgeLocalToRemoteTinygramCompression   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local node will perform
+               Tinygram Compression when sending packets to
+               the remote entity. If false then the local
+               entity will not perform Tinygram Compression.
+               If true then the local entity will perform
+               Tinygram Compression. The value of this object
+               is meaningful only when the link has reached
+               the open state (pppBridgeOperStatus is
+               opened)."
+     REFERENCE
+               "Section 6.7, Tinygram Compression Option, of
+               RFC1220"
+     ::= { pppBridgeEntry 2 }
+
+pppBridgeRemoteToLocalTinygramCompression   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "If false(1) then the remote entity is not
+               expected to perform Tinygram Compression. If
+               true then the remote entity is expected to
+               perform Tinygram Compression. The value of this
+               object is meaningful only when the link has
+               reached the open state (pppBridgeOperStatus is
+               opened)."
+     REFERENCE
+               "Section 6.7, Tinygram Compression Option, of
+               RFC1220"
+     ::= { pppBridgeEntry 3 }
+
+pppBridgeLocalToRemoteLanId   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local node will include
+               the LAN Identification field in transmitted
+               packets or not. If false(1) then the local node
+               will not transmit this field, true(2) means
+               that the field will be transmitted. The value
+               of this object is meaningful only when the link
+               has reached the open state (pppBridgeOperStatus
+               is opened)."
+     REFERENCE
+               "Section 6.8, LAN Identification Option, of
+               RFC1220"
+     ::= { pppBridgeEntry 4 }
+
+pppBridgeRemoteToLocalLanId   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the remote node has
+               indicated that it will include the LAN
+               Identification field in transmitted packets or
+               not. If false(1) then the field will not be
+               transmitted, if true(2) then the field will be
+               transmitted. The value of this object is
+               meaningful only when the link has reached the
+               open state (pppBridgeOperStatus is opened)."
+     REFERENCE
+               "Section 6.8, LAN Identification Option, of
+               RFC1220"
+     ::= { pppBridgeEntry 5 }
+
+--
+-- The PPP Bridge Configuration table
+--
+
+pppBridgeConfigTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppBridgeConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the parameters and statistics
+
+               for the local PPP entity that are related to
+               the operation of Bridging over the PPP."
+     ::= { pppBridge 2 }
+
+pppBridgeConfigEntry   OBJECT-TYPE
+     SYNTAX    PppBridgeConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Bridging Configuration information for a
+               particular PPP link."
+     INDEX     { ifIndex }
+     ::= { pppBridgeConfigTable 1 }
+
+PppBridgeConfigEntry ::= SEQUENCE {
+     pppBridgeConfigAdminStatus
+          INTEGER,
+     pppBridgeConfigTinygram
+          INTEGER,
+     pppBridgeConfigRingId
+          INTEGER,
+     pppBridgeConfigLineId
+          INTEGER,
+     pppBridgeConfigLanId
+          INTEGER
+}
+
+pppBridgeConfigAdminStatus   OBJECT-TYPE
+     SYNTAX    INTEGER { open(1), close(2) }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The immediate desired status of the Bridging
+               network protocol. Setting this object to open
+               will inject an administrative open event into
+               the Bridging network protocol's finite state
+               machine. Setting this object to close will
+               inject an administrative close event into the
+               Bridging network protocol's finite state
+               machine."
+     ::= { pppBridgeConfigEntry 1 }
+
+pppBridgeConfigTinygram   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If false then the local BNCP entity will not
+               initiate the Tinygram Compression Option
+               Negotiation. If true then the local BNCP entity
+               will initiate negotiation of this option."
+     REFERENCE
+               "Section 6.7, Tinygram Compression Option, of
+               RFC1220"
+     DEFVAL    { true }
+     ::= { pppBridgeConfigEntry 2 }
+
+pppBridgeConfigRingId   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If false then the local PPP Entity will not
+               initiate a Remote Ring Identification Option
+               negotiation. If true then the local PPP entity
+               will intiate this negotiation. This MIB object
+               is relevant only if the interface is for 802.5
+               Token Ring bridging."
+     REFERENCE
+               "Section 6.4, IEEE 802.5 Remote Ring
+               Identification Option, of RFC1220"
+     DEFVAL    { false }
+     ::= { pppBridgeConfigEntry 3 }
+
+pppBridgeConfigLineId   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If false then the local PPP Entity is not to
+               initiate a Line Identification Option
+               negotiation. If true then the local PPP entity
+               will intiate this negotiation. This MIB object
+               is relevant only if the interface is for 802.5
+               Token Ring bridging."
+     REFERENCE
+               "Section 6.5, IEEE 802.5 Line Identification
+               Option, of RFC1220"
+     DEFVAL    { false }
+     ::= { pppBridgeConfigEntry 4 }
+
+pppBridgeConfigLanId   OBJECT-TYPE
+     SYNTAX    INTEGER { false(1), true(2) }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If false then the local BNCP entity will not
+               initiate the LAN Identification Option
+               Negotiation. If true then the local BNCP entity
+               will initiate negotiation of this option."
+     REFERENCE
+               "Section 6.8, LAN Identification Option, of
+               RFC1220"
+     DEFVAL    { false }
+     ::= { pppBridgeConfigEntry 5 }
+
+--
+-- The PPP Bridge Media Status Table
+--
+
+pppBridgeMediaTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppBridgeMediaEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table identifying which MAC media types are
+               enabled for the Bridging NCPs."
+     ::= { pppBridge 3 }
+
+pppBridgeMediaEntry   OBJECT-TYPE
+     SYNTAX    PppBridgeMediaEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Status of a specific MAC Type for a specific
+               PPP Link."
+     INDEX     { ifIndex, pppBridgeMediaMacType }
+     ::= { pppBridgeMediaTable 1 }
+
+PppBridgeMediaEntry ::= SEQUENCE {
+     pppBridgeMediaMacType
+          INTEGER,
+     pppBridgeMediaLocalStatus
+          INTEGER,
+     pppBridgeMediaRemoteStatus
+          INTEGER
+
+}
+
+pppBridgeMediaMacType   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The MAC type for which this entry in the
+               pppBridgeMediaTable is providing status
+               information. Valid values for this object are
+               defined in Section 6.6 MAC Type Support
+               Selection of RFC1220 (Bridging Point-to-Point
+               Protocol)."
+     REFERENCE
+               "Section 6.6, MAC Type Support Selection, of
+               RFC1212."
+     ::= { pppBridgeMediaEntry 1 }
+
+pppBridgeMediaLocalStatus   OBJECT-TYPE
+     SYNTAX    INTEGER { accept(1), dont-accept(2) }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local PPP Bridging
+               Entity will accept packets of the protocol type
+               identified in pppBridgeMediaMacType on the PPP
+               link identified by ifIndex or not. If this
+               object is accept then any packets of the
+               indicated MAC type will be received and
+               properly processed. If this object is dont-
+               accept then received packets of the indicated
+               MAC type will not be properly processed."
+     REFERENCE
+               "Section 6.6, MAC Type Support Selection, of
+               RFC1212."
+     ::= { pppBridgeMediaEntry 2 }
+
+pppBridgeMediaRemoteStatus   OBJECT-TYPE
+     SYNTAX    INTEGER { accept(1), dont-accept(2) }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local PPP Bridging
+               Entity believes that the remote PPP Bridging
+               Entity will accept packets of the protocol type
+               identified in pppBridgeMediaMacType on the PPP
+
+               link identified by ifIndex or not."
+     REFERENCE
+               "Section 6.6, MAC Type Support Selection, of
+               RFC1212."
+     ::= { pppBridgeMediaEntry 3 }
+
+--
+-- The PPP Bridge Media Configuration Table
+--
+
+pppBridgeMediaConfigTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppBridgeMediaConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table identifying which MAC media types are
+               enabled for the Bridging NCPs."
+     ::= { pppBridge 4 }
+
+pppBridgeMediaConfigEntry   OBJECT-TYPE
+     SYNTAX    PppBridgeMediaConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Status of a specific MAC Type for a specific
+               PPP Link."
+     INDEX     { ifIndex, pppBridgeMediaConfigMacType }
+     ::= { pppBridgeMediaConfigTable 1 }
+
+PppBridgeMediaConfigEntry ::= SEQUENCE {
+     pppBridgeMediaConfigMacType
+          INTEGER,
+     pppBridgeMediaConfigLocalStatus
+          INTEGER
+}
+
+pppBridgeMediaConfigMacType   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The MAC type for which this entry in the
+               pppBridgeMediaConfigTable is providing status
+               information. Valid values for this object are
+
+               defined in Section 6.6 MAC Type Support
+               Selection of RFC1220 (Bridging Point-to-Point
+               Protocol)."
+     REFERENCE
+               "Section 6.6, MAC Type Support Selection, of
+               RFC1212."
+     ::= { pppBridgeMediaConfigEntry 1 }
+
+pppBridgeMediaConfigLocalStatus   OBJECT-TYPE
+     SYNTAX    INTEGER { accept(1), dont-accept(2) }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local PPP Bridging
+               Entity should accept packets of the protocol
+               type identified in pppBridgeMediaConfigMacType
+               on the PPP link identified by ifIndex or not.
+               Setting this object to the value dont-accept
+               has the affect of invalidating the
+               corresponding entry in the
+               pppBridgeMediaConfigTable object. It is an
+               implementation-specific matter as to whether
+               the agent removes an invalidated entry from the
+               table. Accordingly, management stations must be
+               prepared to receive tabular information from
+               agents that corresponds to entries not
+               currently in use. Changing this object will
+               have effect when the link is next restarted."
+     REFERENCE
+               "Section 6.6, MAC Type Support Selection, of
+               RFC1212."
+     ::= { pppBridgeMediaConfigEntry 2 }
+
+END
diff --git a/snmp_builder/mibs/PPP-IP-NCP-MIB.mib b/snmp_builder/mibs/PPP-IP-NCP-MIB.mib
new file mode 100644
index 0000000..488374a
--- /dev/null
+++ b/snmp_builder/mibs/PPP-IP-NCP-MIB.mib
@@ -0,0 +1,203 @@
+PPP-IP-NCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     Counter
+          FROM RFC1155-SMI
+     ifIndex
+          FROM RFC1213-MIB
+     OBJECT-TYPE
+          FROM RFC-1212
+     ppp
+          FROM PPP-LCP-MIB;
+
+     -- The PPP IP Group.
+     -- Implementation of this group is mandatory for all
+     -- PPP implementations that support operating IP over PPP.
+
+     pppIp OBJECT IDENTIFIER ::= { ppp 3 }
+
+pppIpTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppIpEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the IP parameters and
+               statistics for the local PPP entity."
+     ::= { pppIp 1 }
+
+pppIpEntry   OBJECT-TYPE
+     SYNTAX    PppIpEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "IPCP status information for a particular PPP
+               link."
+     INDEX     { ifIndex }
+     ::= { pppIpTable 1 }
+
+PppIpEntry ::= SEQUENCE {
+     pppIpOperStatus
+          INTEGER,
+     pppIpLocalToRemoteCompressionProtocol
+          INTEGER,
+     pppIpRemoteToLocalCompressionProtocol
+          INTEGER,
+     pppIpRemoteMaxSlotId
+          INTEGER,
+     pppIpLocalMaxSlotId
+          INTEGER
+}
+
+-- The following object reflect the values of the option
+-- parameters used in the PPP IP Control Protocol
+--   pppIpLocalToRemoteCompressionProtocol
+--   pppIpRemoteToLocalCompressionProtocol
+--   pppIpRemoteMaxSlotId
+--   pppIpLocalMaxSlotId
+-- These values are not available until after the PPP Option
+-- negotiation has completed, which is indicated by the link
+-- reaching the open state (i.e., pppIpOperStatus is set to
+-- opened).
+--
+-- Therefore, when pppIpOperStatus is not opened
+-- the contents of these objects is undefined. The value
+-- returned when accessing the objects is an implementation
+-- dependent issue.
+
+pppIpOperStatus   OBJECT-TYPE
+     SYNTAX    INTEGER {opened(1), not-opened(2)}
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The operational status of the IP network
+               protocol. If the value of this object is up
+               then the finite state machine for the IP
+
+               network protocol has reached the Opened state."
+     ::= { pppIpEntry 1 }
+
+pppIpLocalToRemoteCompressionProtocol   OBJECT-TYPE
+     SYNTAX    INTEGER {
+               none(1),
+               vj-tcp(2)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The IP compression protocol that the local
+               PPP-IP entity uses when sending packets to the
+               remote PPP-IP entity. The value of this object
+               is meaningful only when the link has reached
+               the open state (pppIpOperStatus is opened)."
+     ::= { pppIpEntry 2 }
+
+pppIpRemoteToLocalCompressionProtocol   OBJECT-TYPE
+     SYNTAX    INTEGER {
+               none(1),
+               vj-tcp(2)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The IP compression protocol that the remote
+               PPP-IP entity uses when sending packets to the
+               local PPP-IP entity. The value of this object
+               is meaningful only when the link has reached
+               the open state (pppIpOperStatus is opened)."
+     ::= { pppIpEntry 3 }
+
+pppIpRemoteMaxSlotId   OBJECT-TYPE
+     SYNTAX    INTEGER(0..255)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The Max-Slot-Id parameter that the remote node
+               has advertised and that is in use on the link.
+               If vj-tcp header compression is not in use on
+               the link then the value of this object shall be
+               0. The value of this object is meaningful only
+               when the link has reached the open state
+               (pppIpOperStatus is opened)."
+     ::= { pppIpEntry 4 }
+
+pppIpLocalMaxSlotId   OBJECT-TYPE
+     SYNTAX    INTEGER(0..255)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The Max-Slot-Id parameter that the local node
+               has advertised and that is in use on the link.
+               If vj-tcp header compression is not in use on
+               the link then the value of this object shall be
+               0. The value of this object is meaningful only
+               when the link has reached the open state
+               (pppIpOperStatus is opened)."
+     ::= { pppIpEntry 5 }
+
+--
+-- The PPP IP Configuration table.
+-- This is a separate table in order to facilitate
+-- placing these variables in a separate MIB view.
+--
+
+pppIpConfigTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppIpConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing configuration variables for
+               the IPCP for the local PPP entity."
+     ::= { pppIp 2 }
+
+pppIpConfigEntry   OBJECT-TYPE
+     SYNTAX    PppIpConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "IPCP information for a particular PPP link."
+     INDEX     { ifIndex }
+     ::= { pppIpConfigTable 1 }
+
+PppIpConfigEntry ::= SEQUENCE {
+     pppIpConfigAdminStatus
+          INTEGER,
+     pppIpConfigCompression
+
+          INTEGER
+}
+
+pppIpConfigAdminStatus   OBJECT-TYPE
+     SYNTAX    INTEGER {open(1), close(2)}
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The immediate desired status of the IP network
+               protocol. Setting this object to open will
+               inject an administrative open event into the IP
+               network protocol's finite state machine.
+               Setting this object to close will inject an
+               administrative close event into the IP network
+               protocol's finite state machine."
+     ::= { pppIpConfigEntry 1 }
+
+pppIpConfigCompression   OBJECT-TYPE
+     SYNTAX    INTEGER {
+               none(1),
+               vj-tcp(2)
+          }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If none(1) then the local node will not
+               attempt to negotiate any IP Compression option.
+               Otherwise, the local node will attempt to
+               negotiate compression mode indicated by the
+               enumerated value. Changing this object will
+               have effect when the link is next restarted."
+     REFERENCE
+               "Section 4.0, Van Jacobson TCP/IP Header
+               Compression of RFC1332."
+     DEFVAL    { none }
+     ::= { pppIpConfigEntry 2 }
+
+END
diff --git a/snmp_builder/mibs/PPP-LCP-MIB.mib b/snmp_builder/mibs/PPP-LCP-MIB.mib
new file mode 100644
index 0000000..2cfaa35
--- /dev/null
+++ b/snmp_builder/mibs/PPP-LCP-MIB.mib
@@ -0,0 +1,764 @@
+PPP-LCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     Counter
+          FROM RFC1155-SMI
+     ifIndex, transmission
+          FROM RFC1213-MIB
+     OBJECT-TYPE
+          FROM RFC-1212;
+
+     --  PPP MIB
+
+     ppp  OBJECT IDENTIFIER ::= { transmission 23 }
+
+     pppLcp OBJECT IDENTIFIER ::= { ppp 1 }
+
+     -- The individual groups within the PPP-LCP-MIB
+
+     pppLink      OBJECT IDENTIFIER ::= { pppLcp 1 }
+     pppLqr       OBJECT IDENTIFIER ::= { pppLcp 2 }
+     pppTests     OBJECT IDENTIFIER ::= { pppLcp 3 }
+
+-- 4.1.  PPP Link Group
+
+--
+-- The PPP Link Group. Implementation of this
+-- group is mandatory for all PPP entities.
+--
+
+-- The following object reflect the values of the option
+-- parameters used in the PPP Link Control Protocol
+--   pppLinkStatusLocalMRU
+--   pppLinkStatusRemoteMRU
+--   pppLinkStatusLocalToPeerACCMap
+--   pppLinkStatusPeerToLocalACCMap
+--   pppLinkStatusLocalToRemoteProtocolCompression
+--   pppLinkStatusRemoteToLocalProtocolCompression
+--   pppLinkStatusLocalToRemoteACCompression
+--   pppLinkStatusRemoteToLocalACCompression
+--   pppLinkStatusTransmitFcsSize
+--   pppLinkStatusReceiveFcsSize
+--
+-- These values are not available until after the PPP Option
+-- negotiation has completed, which is indicated by the link
+-- reaching the open state (i.e., ifOperStatus is set to
+-- up).
+--
+-- Therefore, when ifOperStatus is not up
+-- the contents of these objects is undefined. The value
+-- returned when accessing the objects is an implementation
+-- dependent issue.
+
+pppLinkStatusTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppLinkStatusEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "A table containing PPP-link specific variables
+               for this PPP implementation."
+     ::= { pppLink 1 }
+
+pppLinkStatusEntry   OBJECT-TYPE
+     SYNTAX    PppLinkStatusEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Management information about a particular PPP
+               Link."
+     INDEX     { ifIndex }
+     ::= { pppLinkStatusTable 1 }
+
+PppLinkStatusEntry ::= SEQUENCE {
+     pppLinkStatusPhysicalIndex
+          INTEGER,
+     pppLinkStatusBadAddresses
+          Counter,
+     pppLinkStatusBadControls
+          Counter,
+     pppLinkStatusPacketTooLongs
+          Counter,
+     pppLinkStatusBadFCSs
+          Counter,
+     pppLinkStatusLocalMRU
+          INTEGER,
+     pppLinkStatusRemoteMRU
+          INTEGER,
+     pppLinkStatusLocalToPeerACCMap
+          OCTET STRING,
+     pppLinkStatusPeerToLocalACCMap
+          OCTET STRING,
+     pppLinkStatusLocalToRemoteProtocolCompression
+          INTEGER,
+     pppLinkStatusRemoteToLocalProtocolCompression
+          INTEGER,
+     pppLinkStatusLocalToRemoteACCompression
+          INTEGER,
+     pppLinkStatusRemoteToLocalACCompression
+          INTEGER,
+     pppLinkStatusTransmitFcsSize
+          INTEGER,
+     pppLinkStatusReceiveFcsSize
+          INTEGER
+     }
+pppLinkStatusPhysicalIndex   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The value of ifIndex that identifies the
+               lower-level interface over which this PPP Link
+               is operating. This interface would usually be
+               an HDLC or RS-232 type of interface. If there
+               is no lower-layer interface element, or there
+               is no ifEntry for the element, or the element
+               can not be identified, then the value of this
+               object is 0.  For example, suppose that PPP is
+               operating over a serial port. This would use
+               two entries in the ifTable. The PPP could be
+               running over `interface' number 123 and the
+               serial port could be running over `interface'
+               number 987.  Therefore, ifSpecific.123 would
+               contain the OBJECT IDENTIFIER ppp
+               pppLinkStatusPhysicalIndex.123 would contain
+               987, and ifSpecific.987 would contain the
+               OBJECT IDENTIFIER for the serial-port's media-
+               specific MIB."
+     ::= { pppLinkStatusEntry 1 }
+
+pppLinkStatusBadAddresses   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The number of packets received with an
+               incorrect Address Field. This counter is a
+               component of the ifInErrors variable that is
+               associated with the interface that represents
+               this PPP Link."
+     REFERENCE
+               "Section 3.1, Address Field, of RFC1331."
+     ::= { pppLinkStatusEntry 2 }
+
+pppLinkStatusBadControls   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The number of packets received on this link
+               with an incorrect Control Field. This counter
+               is a component of the ifInErrors variable that
+               is associated with the interface that
+               represents this PPP Link."
+     REFERENCE
+               "Section 3.1, Control Field, of RFC1331."
+     ::= { pppLinkStatusEntry 3 }
+
+pppLinkStatusPacketTooLongs   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The number of received packets that have been
+               discarded because their length exceeded the
+               MRU. This counter is a component of the
+               ifInErrors variable that is associated with the
+               interface that represents this PPP Link. NOTE,
+               packets which are longer than the MRU but which
+               are successfully received and processed are NOT
+               included in this count."
+     ::= { pppLinkStatusEntry 4 }
+
+pppLinkStatusBadFCSs   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The number of received packets that have been
+               discarded due to having an incorrect FCS. This
+               counter is a component of the ifInErrors
+               variable that is associated with the interface
+               that represents this PPP Link."
+     ::= { pppLinkStatusEntry 5 }
+
+pppLinkStatusLocalMRU   OBJECT-TYPE
+     SYNTAX    INTEGER(1..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The current value of the MRU for the local PPP
+               Entity. This value is the MRU that the remote
+               entity is using when sending packets to the
+               local PPP entity. The value of this object is
+               meaningful only when the link has reached the
+               open state (ifOperStatus is up)."
+     ::= { pppLinkStatusEntry 6 }
+
+pppLinkStatusRemoteMRU   OBJECT-TYPE
+     SYNTAX    INTEGER(1..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The current value of the MRU for the remote
+               PPP Entity. This value is the MRU that the
+               local entity is using when sending packets to
+               the remote PPP entity. The value of this object
+               is meaningful only when the link has reached
+               the open state (ifOperStatus is up)."
+     ::= { pppLinkStatusEntry 7 }
+
+pppLinkStatusLocalToPeerACCMap   OBJECT-TYPE
+     SYNTAX    OCTET STRING (SIZE (4))
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The current value of the ACC Map used for
+               sending packets from the local PPP entity to
+               the remote PPP entity. The value of this object
+               is meaningful only when the link has reached
+               the open state (ifOperStatus is up)."
+     ::= { pppLinkStatusEntry 8 }
+
+pppLinkStatusPeerToLocalACCMap   OBJECT-TYPE
+     SYNTAX    OCTET STRING (SIZE (4))
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The ACC Map used by the remote PPP entity when
+               transmitting packets to the local PPP entity.
+               The value of this object is meaningful only
+               when the link has reached the open state
+               (ifOperStatus is up)."
+     ::= { pppLinkStatusEntry 9 }
+
+pppLinkStatusLocalToRemoteProtocolCompression
+     OBJECT-TYPE
+     SYNTAX    INTEGER {
+               enabled(1),
+               disabled(2)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local PPP entity will
+
+               use Protocol Compression when transmitting
+               packets to the remote PPP entity. The value of
+               this object is meaningful only when the link
+               has reached the open state (ifOperStatus is
+               up)."
+     ::= { pppLinkStatusEntry 10 }
+
+pppLinkStatusRemoteToLocalProtocolCompression
+     OBJECT-TYPE
+     SYNTAX    INTEGER {
+               enabled(1),
+               disabled(2)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the remote PPP entity will
+               use Protocol Compression when transmitting
+               packets to the local PPP entity. The value of
+               this object is meaningful only when the link
+               has reached the open state (ifOperStatus is
+               up)."
+     ::= { pppLinkStatusEntry 11 }
+
+pppLinkStatusLocalToRemoteACCompression   OBJECT-TYPE
+     SYNTAX    INTEGER {
+               enabled(1),
+               disabled(2)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the local PPP entity will
+               use Address and Control Compression when
+               transmitting packets to the remote PPP entity.
+               The value of this object is meaningful only
+               when the link has reached the open state
+               (ifOperStatus is up)."
+     ::= { pppLinkStatusEntry 12 }
+
+pppLinkStatusRemoteToLocalACCompression   OBJECT-TYPE
+     SYNTAX    INTEGER {
+               enabled(1),
+               disabled(2)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "Indicates whether the remote PPP entity will
+               use Address and Control Compression when
+               transmitting packets to the local PPP entity.
+               The value of this object is meaningful only
+               when the link has reached the open state
+               (ifOperStatus is up)."
+     ::= { pppLinkStatusEntry 13 }
+
+pppLinkStatusTransmitFcsSize   OBJECT-TYPE
+     SYNTAX    INTEGER (0..128)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The size of the Frame Check Sequence (FCS) in
+               bits that the local node will generate when
+               sending packets to the remote node. The value
+               of this object is meaningful only when the link
+               has reached the open state (ifOperStatus is
+               up)."
+     ::= { pppLinkStatusEntry 14 }
+
+pppLinkStatusReceiveFcsSize   OBJECT-TYPE
+     SYNTAX    INTEGER (0..128)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The size of the Frame Check Sequence (FCS) in
+               bits that the remote node will generate when
+               sending packets to the local node. The value of
+               this object is meaningful only when the link
+               has reached the open state (ifOperStatus is
+               up)."
+     ::= { pppLinkStatusEntry 15 }
+
+pppLinkConfigTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppLinkConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "A table containing the LCP configuration
+               parameters for this PPP Link. These variables
+               represent the initial configuration of the PPP
+
+               Link. The actual values of the parameters may
+               be changed when the link is brought up via the
+               LCP options negotiation mechanism."
+     ::= { pppLink 2 }
+
+pppLinkConfigEntry   OBJECT-TYPE
+     SYNTAX    PppLinkConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Configuration information about a particular
+               PPP Link."
+     INDEX     { ifIndex }
+     ::= { pppLinkConfigTable 1 }
+
+PppLinkConfigEntry ::= SEQUENCE {
+     pppLinkConfigInitialMRU
+          INTEGER,
+     pppLinkConfigReceiveACCMap
+          OCTET STRING,
+     pppLinkConfigTransmitACCMap
+          OCTET STRING,
+     pppLinkConfigMagicNumber
+          INTEGER,
+     pppLinkConfigFcsSize
+          INTEGER
+     }
+
+pppLinkConfigInitialMRU   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The initial Maximum Receive Unit (MRU) that
+               the local PPP entity will advertise to the
+               remote entity. If the value of this variable is
+               0 then the local PPP entity will not advertise
+               any MRU to the remote entity and the default
+               MRU will be assumed. Changing this object will
+               have effect when the link is next restarted."
+     REFERENCE
+               "Section 7.2, Maximum Receive Unit of RFC1331."
+     DEFVAL    { 1500 }
+     ::= { pppLinkConfigEntry 1 }
+
+pppLinkConfigReceiveACCMap   OBJECT-TYPE
+     SYNTAX    OCTET STRING (SIZE (4))
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The Asynchronous-Control-Character-Map (ACC)
+               that the local PPP entity requires for use on
+               its receive side. In effect, this is the ACC
+               Map that is required in order to ensure that
+               the local modem will successfully receive all
+               characters. The actual ACC map used on the
+               receive side of the link will be a combination
+               of the local node's pppLinkConfigReceiveACCMap
+               and the remote node's
+               pppLinkConfigTransmitACCMap. Changing this
+               object will have effect when the link is next
+               restarted."
+     REFERENCE
+               "Section 7.3, page 4, Async-Control-Character-
+               Map of RFC1331."
+     DEFVAL    { 'ffffffff'h }
+     ::= { pppLinkConfigEntry 2 }
+
+pppLinkConfigTransmitACCMap   OBJECT-TYPE
+     SYNTAX    OCTET STRING (SIZE (4))
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The Asynchronous-Control-Character-Map (ACC)
+               that the local PPP entity requires for use on
+               its transmit side. In effect, this is the ACC
+               Map that is required in order to ensure that
+               all characters can be successfully transmitted
+               through the local modem.  The actual ACC map
+               used on the transmit side of the link will be a
+               combination of the local node's
+               pppLinkConfigTransmitACCMap and the remote
+               node's pppLinkConfigReceiveACCMap. Changing
+               this object will have effect when the link is
+               next restarted."
+     REFERENCE
+               "Section 7.3, page 4, Async-Control-Character-
+               Map of RFC1331."
+     DEFVAL    { 'ffffffff'h }
+     ::= { pppLinkConfigEntry 3 }
+
+pppLinkConfigMagicNumber   OBJECT-TYPE
+     SYNTAX    INTEGER {false (1), true (2)}
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If true(2) then the local node will attempt to
+               perform Magic Number negotiation with the
+               remote node. If false(1) then this negotiation
+               is not performed. In any event, the local node
+               will comply with any magic number negotiations
+               attempted by the remote node, per the PPP
+               specification. Changing this object will have
+               effect when the link is next restarted."
+     REFERENCE
+               "Section 7.6, Magic Number, of RFC1331."
+     DEFVAL    { false }
+     ::= { pppLinkConfigEntry 4 }
+
+pppLinkConfigFcsSize   OBJECT-TYPE
+     SYNTAX    INTEGER (0..128)
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The size of the FCS, in bits, the local node
+               will attempt to negotiate for use with the
+               remote node. Regardless of the value of this
+               object, the local node will comply with any FCS
+               size negotiations initiated by the remote node,
+               per the PPP specification. Changing this object
+               will have effect when the link is next
+               restarted."
+     DEFVAL    { 16 }
+     ::= { pppLinkConfigEntry 5 }
+
+-- 4.2.  PPP LQR Group
+
+     --
+     -- The PPP LQR Group.
+     -- Implementation of this group is mandatory for all
+     -- PPP implementations that implement LQR.
+     --
+
+pppLqrTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppLqrEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the LQR parameters and
+               statistics for the local PPP entity."
+     ::= { pppLqr 1 }
+
+pppLqrEntry   OBJECT-TYPE
+     SYNTAX    PppLqrEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "LQR information for a particular PPP link. A
+               PPP link will have an entry in this table if
+               and only if LQR Quality Monitoring has been
+               successfully negotiated for said link."
+     INDEX     { ifIndex }
+     ::= { pppLqrTable 1 }
+
+PppLqrEntry ::= SEQUENCE {
+     pppLqrQuality
+          INTEGER,
+     pppLqrInGoodOctets
+          Counter,
+     pppLqrLocalPeriod
+          INTEGER,
+     pppLqrRemotePeriod
+          INTEGER,
+     pppLqrOutLQRs
+          Counter,
+     pppLqrInLQRs
+          Counter
+}
+
+pppLqrQuality   OBJECT-TYPE
+     SYNTAX    INTEGER {
+               good(1),
+               bad(2),
+               not-determined(3)
+          }
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The current quality of the link as declared by
+               the local PPP entity's Link-Quality Management
+               modules. No effort is made to define good or
+               bad, nor the policy used to determine it. The
+
+               not-determined value indicates that the entity
+               does not actually evaluate the link's quality.
+               This value is used to disambiguate the
+               `determined to be good' case from the `no
+               determination made and presumed to be good'
+               case."
+     ::= { pppLqrEntry 1 }
+
+pppLqrInGoodOctets   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The LQR InGoodOctets counter for this link."
+     REFERENCE
+               "Section 2.2, Counters, of RFC1333."
+     ::= { pppLqrEntry 2 }
+
+pppLqrLocalPeriod   OBJECT-TYPE
+     SYNTAX    INTEGER(1..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The LQR reporting period, in hundredths of a
+               second that is in effect for the local PPP
+               entity."
+     REFERENCE
+               "Section 2.5, Configuration Option Format, of
+               RFC1333."
+     ::= { pppLqrEntry 3 }
+
+pppLqrRemotePeriod   OBJECT-TYPE
+     SYNTAX    INTEGER(1..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The LQR reporting period, in hundredths of a
+               second, that is in effect for the remote PPP
+               entity."
+     REFERENCE
+               "Section 2.5, Configuration Option Format, of
+               RFC1333."
+     ::= { pppLqrEntry 4 }
+
+pppLqrOutLQRs   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The value of the OutLQRs counter on the local
+               node for the link identified by ifIndex."
+     REFERENCE
+               "Section 2.2, Counters, of RFC1333."
+     ::= { pppLqrEntry 5 }
+
+pppLqrInLQRs   OBJECT-TYPE
+     SYNTAX    Counter
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The value of the InLQRs counter on the local
+               node for the link identified by ifIndex."
+     REFERENCE
+               "Section 2.2, Counters, of RFC1333."
+     ::= { pppLqrEntry 6 }
+
+--
+-- The PPP LQR Configuration table.
+--
+
+pppLqrConfigTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppLqrConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the LQR Configuration
+               parameters for the local PPP entity."
+     ::= { pppLqr 2 }
+
+pppLqrConfigEntry   OBJECT-TYPE
+     SYNTAX    PppLqrConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "LQR configuration information for a particular
+               PPP link."
+     INDEX     { ifIndex }
+     ::= { pppLqrConfigTable 1 }
+
+PppLqrConfigEntry ::= SEQUENCE {
+     pppLqrConfigPeriod
+          INTEGER,
+     pppLqrConfigStatus
+          INTEGER
+}
+
+pppLqrConfigPeriod   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The LQR Reporting Period that the local PPP
+               entity will attempt to negotiate with the
+               remote entity, in units of hundredths of a
+               second. Changing this object will have effect
+               when the link is next restarted."
+     REFERENCE
+               "Section 2.5, Configuration Option Format, of
+               RFC1333."
+     DEFVAL    { 0 }
+     ::= { pppLqrConfigEntry 1 }
+
+pppLqrConfigStatus   OBJECT-TYPE
+     SYNTAX    INTEGER {disabled (1), enabled (2)}
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "If enabled(2) then the local node will attempt
+               to perform LQR negotiation with the remote
+               node. If disabled(1) then this negotiation is
+               not performed. In any event, the local node
+               will comply with any magic number negotiations
+               attempted by the remote node, per the PPP
+               specification. Changing this object will have
+               effect when the link is next restarted.
+               Setting this object to the value disabled(1)
+               has the effect of invalidating the
+               corresponding entry in the pppLqrConfigTable
+               object. It is an implementation-specific matter
+               as to whether the agent removes an invalidated
+               entry from the table. Accordingly, management
+               stations must be prepared to receive tabular
+               information from agents that corresponds to
+               entries not currently in use."
+     REFERENCE
+               "Section 7.6, Magic Number, of RFC1331."
+     DEFVAL    { enabled }
+     ::= { pppLqrConfigEntry 2 }
+
+-- 4.3.  PPP LQR Extensions Group
+
+--
+-- The PPP LQR Extensions Group.
+-- Implementation of this group is optional.
+--
+-- The intent of this group is to allow external
+-- implementation of the policy mechanisms that
+-- are used to declare a link to be "bad" or not.
+--
+-- It is not practical to examine the MIB objects
+-- which are used to generate LQR packets since
+-- LQR policies tend to require synchronization of
+-- the values of all data used to determine Link
+-- Quality; i.e. the values of the relevant counters
+-- must all be taken at the same instant in time.
+--
+
+pppLqrExtnsTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppLqrExtnsEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing additional LQR information
+               for the local PPP entity."
+     ::= { pppLqr 3 }
+
+pppLqrExtnsEntry   OBJECT-TYPE
+     SYNTAX    PppLqrExtnsEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Extended LQR information for a particular PPP
+               link. Assuming that this group has been
+               implemented, a PPP link will have an entry in
+               this table if and only if LQR Quality
+               Monitoring has been successfully negotiated for
+               said link."
+     INDEX     { ifIndex }
+     ::= { pppLqrExtnsTable 1 }
+
+PppLqrExtnsEntry ::= SEQUENCE {
+
+     pppLqrExtnsLastReceivedLqrPacket
+          OCTET STRING(SIZE(68))
+}
+
+pppLqrExtnsLastReceivedLqrPacket   OBJECT-TYPE
+     SYNTAX    OCTET STRING(SIZE(68))
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "This object contains the most recently
+               received LQR packet.  The format of the packet
+               is as described in the LQM Protocol
+               specificiation. All fields of the packet,
+               including the `save' fields, are stored in this
+               object.
+
+               The LQR packet is stored in network byte order.
+               The LAP-B and PPP headers are not stored in
+               this object; the first four octets of this
+               variable contain the Magic-Number field, the
+               second four octets contain the LastOutLQRs
+               field and so on. The last four octets of this
+               object contain the SaveInOctets field of the
+               LQR packet."
+     REFERENCE
+               "Section 2.6, Packet Format, of RFC1333"
+     ::= { pppLqrExtnsEntry 1 }
+
+-- 4.4.  PPP Tests
+
+-- The extensions to the interface table in RFC1229 define a
+-- table through which the network manager can instruct the
+-- managed object to perform various tests of the interface. This
+-- is the ifExtnsTestTable.
+
+-- The PPP MIB defines two such tests.
+
+-- 4.4.1.  PPP Echo Test
+
+-- The PPP Echo Test is defined as
+
+     pppEchoTest    OBJECT IDENTIFIER ::= { pppTests 1 }
+
+-- Invoking this test causes a PPP Echo Packet to be sent on the
+-- line. ifExtnsTestResult returns success(2) if the echo
+-- response came back properly. It returns failed(7) if the
+-- response did not properly return. The definition of "proper"
+
+-- in this context is left to the discretion of the implementor.
+
+-- 4.4.2.  PPP Discard Test
+
+-- The PPP Discard Test is defined as
+
+     pppDiscardTest OBJECT IDENTIFIER ::= { pppTests 2 }
+
+-- Invoking this test causes a PPP Discard Packet to be sent on
+-- the line. ifExtnsTestResult returns success(2) if the discard
+-- packet was successfully transmitted and failed(7) if an error
+-- was detected on transmission. The definition of "transmission
+-- error" in this context is left to the discretion of the
+-- implementor.
+
+END
diff --git a/snmp_builder/mibs/PPP-SEC-MIB.mib b/snmp_builder/mibs/PPP-SEC-MIB.mib
new file mode 100644
index 0000000..b16d9fc
--- /dev/null
+++ b/snmp_builder/mibs/PPP-SEC-MIB.mib
@@ -0,0 +1,289 @@
+PPP-SEC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     Counter
+          FROM RFC1155-SMI
+     OBJECT-TYPE
+          FROM RFC-1212
+     ppp
+          FROM PPP-LCP-MIB;
+
+     pppSecurity OBJECT IDENTIFIER ::= { ppp 2 }
+
+     pppSecurityProtocols OBJECT IDENTIFIER ::= { pppSecurity 1 }
+
+-- The following uniquely identify the various protocols
+-- used by PPP security. These OBJECT IDENTIFIERS are
+-- used in the pppSecurityConfigProtocol and
+-- pppSecuritySecretsProtocol objects to identify to which
+-- protocols the table entries apply.
+
+     pppSecurityPapProtocol OBJECT IDENTIFIER ::=
+               { pppSecurityProtocols 1 }
+     pppSecurityChapMD5Protocol OBJECT IDENTIFIER ::=
+               { pppSecurityProtocols 2 }
+
+-- PPP Security Group
+-- Implementation of this group is optional.
+
+-- This table allows the network manager to configure
+-- which security protocols are to be used on which
+-- link and in what order of preference each is to be tried
+
+pppSecurityConfigTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppSecurityConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the configuration and
+               preference parameters for PPP Security."
+     ::= { pppSecurity 2 }
+
+pppSecurityConfigEntry   OBJECT-TYPE
+     SYNTAX    PppSecurityConfigEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Security configuration information for a
+               particular PPP link."
+     INDEX     { pppSecurityConfigLink,
+               pppSecurityConfigPreference }
+     ::= { pppSecurityConfigTable 1 }
+
+PppSecurityConfigEntry ::= SEQUENCE {
+     pppSecurityConfigLink
+          INTEGER,
+     pppSecurityConfigPreference
+          INTEGER,
+     pppSecurityConfigProtocol
+          OBJECT IDENTIFIER,
+     pppSecurityConfigStatus
+          INTEGER
+     }
+
+pppSecurityConfigLink   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The value of ifIndex that identifies the entry
+
+               in the interface table that is associated with
+               the local PPP entity's link for which this
+               particular security algorithm shall be
+               attempted. A value of 0 indicates the default
+               algorithm - i.e., this entry applies to all
+               links for which explicit entries in the table
+               do not exist."
+     ::= { pppSecurityConfigEntry 1 }
+
+pppSecurityConfigPreference   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The relative preference of the security
+               protocol identified by
+               pppSecurityConfigProtocol. Security protocols
+               with lower values of
+               pppSecurityConfigPreference are tried before
+               protocols with higher values of
+               pppSecurityConfigPreference."
+     ::= { pppSecurityConfigEntry 2 }
+
+pppSecurityConfigProtocol   OBJECT-TYPE
+     SYNTAX    OBJECT IDENTIFIER
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "Identifies the security protocol to be
+               attempted on the link identified by
+               pppSecurityConfigLink at the preference level
+               identified by pppSecurityConfigPreference. "
+     ::= { pppSecurityConfigEntry 3 }
+
+pppSecurityConfigStatus   OBJECT-TYPE
+     SYNTAX    INTEGER  {
+               invalid(1),
+               valid(2)
+          }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "Setting this object to the value invalid(1)
+               has the effect of invalidating the
+               corresponding entry in the
+
+               pppSecurityConfigTable. It is an
+               implementation-specific matter as to whether
+               the agent removes an invalidated entry from the
+               table.  Accordingly, management stations must
+               be prepared to receive tabular information from
+               agents that corresponds to entries not
+               currently in use.  Proper interpretation of
+               such entries requires examination of the
+               relevant pppSecurityConfigStatus object."
+     DEFVAL    { valid }
+     ::= { pppSecurityConfigEntry 4 }
+
+-- This table contains all of the ID/Secret pair information.
+
+pppSecuritySecretsTable   OBJECT-TYPE
+     SYNTAX    SEQUENCE OF PppSecuritySecretsEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Table containing the identities and secrets
+               used by the PPP authentication protocols.  As
+               this table contains secret information, it is
+               expected that access to this table be limited
+               to those SNMP Party-Pairs for which a privacy
+               protocol is in use for all SNMP messages that
+               the parties exchange.  This table contains both
+               the ID and secret pair(s) that the local PPP
+               entity will advertise to the remote entity and
+               the pair(s) that the local entity will expect
+               from the remote entity.  This table allows for
+               multiple id/secret password pairs to be
+               specified for a particular link by using the
+               pppSecuritySecretsIdIndex object."
+     ::= { pppSecurity 3 }
+
+pppSecuritySecretsEntry   OBJECT-TYPE
+     SYNTAX    PppSecuritySecretsEntry
+     ACCESS    not-accessible
+     STATUS    mandatory
+     DESCRIPTION
+               "Secret information."
+     INDEX     { pppSecuritySecretsLink,
+               pppSecuritySecretsIdIndex }
+     ::= { pppSecuritySecretsTable 1 }
+
+PppSecuritySecretsEntry ::= SEQUENCE {
+     pppSecuritySecretsLink
+          INTEGER,
+     pppSecuritySecretsIdIndex
+          INTEGER,
+     pppSecuritySecretsDirection
+          INTEGER,
+     pppSecuritySecretsProtocol
+          OBJECT IDENTIFIER,
+     pppSecuritySecretsIdentity
+          OCTET STRING,
+     pppSecuritySecretsSecret
+          OCTET STRING,
+     pppSecuritySecretsStatus
+          INTEGER
+}
+
+pppSecuritySecretsLink   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "The link to which this ID/Secret pair applies.
+               By convention, if the value of this object is 0
+               then the ID/Secret pair applies to all links."
+     ::= { pppSecuritySecretsEntry 1 }
+
+pppSecuritySecretsIdIndex   OBJECT-TYPE
+     SYNTAX    INTEGER(0..2147483647)
+     ACCESS    read-only
+     STATUS    mandatory
+     DESCRIPTION
+               "A unique value for each ID/Secret pair that
+               has been defined for use on this link.  This
+               allows multiple ID/Secret pairs to be defined
+               for each link.  How the local entity selects
+               which pair to use is a local implementation
+               decision."
+     ::= { pppSecuritySecretsEntry 2 }
+
+pppSecuritySecretsDirection   OBJECT-TYPE
+     SYNTAX    INTEGER  {
+               local-to-remote(1),
+               remote-to-local(2)
+          }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "This object defines the direction in which a
+               particular ID/Secret pair is valid.  If this
+               object is local-to-remote then the local PPP
+               entity will use the ID/Secret pair when
+               attempting to authenticate the local PPP entity
+               to the remote PPP entity.  If this object is
+               remote-to-local then the local PPP entity will
+               expect the ID/Secret pair to be used by the
+               remote PPP entity when the remote PPP entity
+               attempts to authenticate itself to the local
+               PPP entity."
+     ::= { pppSecuritySecretsEntry 3 }
+
+pppSecuritySecretsProtocol   OBJECT-TYPE
+     SYNTAX    OBJECT IDENTIFIER
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The security protocol (e.g. CHAP or PAP) to
+               which this ID/Secret pair applies."
+     ::= { pppSecuritySecretsEntry 4 }
+
+pppSecuritySecretsIdentity   OBJECT-TYPE
+     SYNTAX    OCTET STRING (SIZE(0..255))
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The Identity of the ID/Secret pair.  The
+               actual format, semantics, and use of
+               pppSecuritySecretsIdentity depends on the
+               actual security protocol used.  For example, if
+               pppSecuritySecretsProtocol is
+               pppSecurityPapProtocol then this object will
+               contain a PAP Peer-ID. If
+               pppSecuritySecretsProtocol is
+               pppSecurityChapMD5Protocol then this object
+               would contain the CHAP NAME parameter."
+     ::= { pppSecuritySecretsEntry 5 }
+
+pppSecuritySecretsSecret   OBJECT-TYPE
+     SYNTAX    OCTET STRING (SIZE(0..255))
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "The secret of the ID/Secret pair.  The actual
+               format, semantics, and use of
+               pppSecuritySecretsSecret depends on the actual
+               security protocol used.  For example, if
+               pppSecuritySecretsProtocol is
+               pppSecurityPapProtocol then this object will
+               contain a PAP Password. If
+               pppSecuritySecretsProtocol is
+               pppSecurityChapMD5Protocol then this object
+               would contain the CHAP MD5 Secret."
+     ::= { pppSecuritySecretsEntry 6 }
+
+pppSecuritySecretsStatus   OBJECT-TYPE
+     SYNTAX    INTEGER  {
+               invalid(1),
+               valid(2)
+          }
+     ACCESS    read-write
+     STATUS    mandatory
+     DESCRIPTION
+               "Setting this object to the value invalid(1)
+               has the effect of invalidating the
+               corresponding entry in the
+               pppSecuritySecretsTable. It is an
+               implementation-specific matter as to whether
+               the agent removes an invalidated entry from the
+               table.  Accordingly, management stations must
+               be prepared to receive tabular information from
+               agents that corresponds to entries not
+               currently in use.  Proper interpretation of
+               such entries requires examination of the
+               relevant pppSecuritySecretsStatus object."
+     DEFVAL    { valid }
+     ::= { pppSecuritySecretsEntry 7 }
+
+END
diff --git a/snmp_builder/mibs/PTOPO-MIB.mib b/snmp_builder/mibs/PTOPO-MIB.mib
new file mode 100644
index 0000000..5aafb3f
--- /dev/null
+++ b/snmp_builder/mibs/PTOPO-MIB.mib
@@ -0,0 +1,804 @@
+PTOPO-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Integer32, Counter32, mib-2
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, AutonomousType, RowStatus, TimeStamp, TruthValue
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+
+        FROM SNMPv2-CONF
+    TimeFilter
+        FROM RMON2-MIB
+    PhysicalIndex
+        FROM ENTITY-MIB
+    AddressFamilyNumbers
+        FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB;
+
+ptopoMIB MODULE-IDENTITY
+    LAST-UPDATED "200009210000Z"
+    ORGANIZATION "IETF; PTOPOMIB Working Group"
+    CONTACT-INFO
+       "PTOPOMIB WG Discussion:
+        ptopo@3com.com
+        Subscription:
+        majordomo@3com.com
+          msg body: [un]subscribe ptopomib
+
+        Andy Bierman
+        Cisco Systems Inc.
+        170 West Tasman Drive
+        San Jose, CA 95134
+        408-527-3711
+        abierman@cisco.com
+
+        Kendall S. Jones
+        Nortel Networks
+        4401 Great America Parkway
+        Santa Clara, CA 95054
+        408-495-7356
+        kejones@nortelnetworks.com"
+    DESCRIPTION
+            "The MIB module for physical topology information."
+    REVISION        "200009210000Z"
+    DESCRIPTION
+            "Initial Version of the Physical Topology MIB.  This version
+            published as RFC 2922."
+    ::= { mib-2 79 }
+
+ptopoMIBObjects   OBJECT IDENTIFIER ::= { ptopoMIB 1 }
+
+-- MIB groups
+ptopoData         OBJECT IDENTIFIER ::= { ptopoMIBObjects 1 }
+ptopoGeneral      OBJECT IDENTIFIER ::= { ptopoMIBObjects 2 }
+ptopoConfig       OBJECT IDENTIFIER ::= { ptopoMIBObjects 3 }
+
+-- textual conventions
+
+PtopoGenAddr ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "The value of an address."
+    SYNTAX      OCTET STRING (SIZE (0..20))
+
+PtopoChassisIdType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the source of a chassis identifier.
+
+            The enumeration 'chasIdEntPhysicalAlias(1)' represents a
+            chassis identifier based on the value of entPhysicalAlias
+            for a chassis component (i.e., an entPhysicalClass value of
+            'chassis(3)').
+
+            The enumeration 'chasIdIfAlias(2)' represents a chassis
+            identifier based on the value of ifAlias for an interface
+            on the containing chassis.
+
+            The enumeration 'chasIdPortEntPhysicalAlias(3)' represents
+            a chassis identifier based on the value of entPhysicalAlias
+            for a port or backplane component (i.e., entPhysicalClass
+            value of 'port(10)' or 'backplane(4)'), within the
+            containing chassis.
+
+            The enumeration 'chasIdMacAddress(4)' represents a chassis
+            identifier based on the value of a unicast source MAC
+            address (encoded in network byte order and IEEE 802.3
+            canonical bit order), of a port on the containing chassis.
+
+            The enumeration 'chasIdPtopoGenAddr(5)' represents a
+            chassis identifier based on a network address, associated
+            with a particular chassis.  The encoded address is actually
+            composed of two fields.  The first field is a single octet,
+            representing the IANA AddressFamilyNumbers value for the
+            specific address type, and the second field is the
+            PtopoGenAddr address value."
+    SYNTAX      INTEGER {
+            chasIdEntPhysicalAlias(1),
+            chasIdIfAlias(2),
+            chasIdPortEntPhysicalAlias(3),
+            chasIdMacAddress(4),
+            chasIdPtopoGenAddr(5)
+    }
+
+PtopoChassisId ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the format of a chassis identifier
+            string.  Objects of this type are always used with an
+            associated PtopoChassisIdType object, which identifies the
+            format of the particular PtopoChassisId object instance.
+
+            If the associated PtopoChassisIdType object has a value of
+            'chasIdEntPhysicalAlias(1)', then the octet string
+            identifies a particular instance of the entPhysicalAlias
+            object for a chassis component (i.e., an entPhysicalClass
+            value of 'chassis(3)').
+
+            If the associated PtopoChassisIdType object has a value of
+            'chasIdIfAlias(2)', then the octet string identifies a
+            particular instance of the ifAlias object for an interface
+            on the containing chassis.
+
+            If the associated PtopoChassisIdType object has a value of
+            'chasIdPortEntPhysicalAlias(3)', then the octet string
+            identifies a particular instance of the entPhysicalAlias
+            object for a port or backplane component within the
+            containing chassis.
+
+            If the associated PtopoChassisIdType object has a value of
+            'chasIdMacAddress(4)', then this string identifies a
+            particular unicast source MAC address (encoded in network
+            byte order and IEEE 802.3 canonical bit order), of a port on
+            the containing chassis.
+
+            If the associated PtopoChassisIdType object has a value of
+            'chasIdPtopoGenAddr(5)', then this string identifies a
+            particular network address, encoded in network byte order,
+            associated with one or more ports on the containing chassis.
+            The first octet contains the IANA Address Family Numbers
+            enumeration value for the specific address type, and octets
+            2 through N contain the PtopoGenAddr address value in
+            network byte order."
+    SYNTAX      OCTET STRING (SIZE (1..32))
+
+PtopoPortIdType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the source of a particular type of port
+            identifier used in the PTOPO MIB.
+
+            The enumeration 'portIdIfAlias(1)' represents a port
+            identifier based on the ifAlias MIB object.
+
+            The enumeration 'portIdPortEntPhysicalAlias(2)' represents a
+            port identifier based on the value of entPhysicalAlias for a
+            port or backplane component (i.e., entPhysicalClass value of
+            'port(10)' or 'backplane(4)'), within the containing
+            chassis.
+
+            The enumeration 'portIdMacAddr(3)' represents a port
+            identifier based on a unicast source MAC address, which has
+            been detected by the agent and associated with a particular
+            port.
+
+            The enumeration 'portIdPtopoGenAddr(4)' represents a port
+            identifier based on a network address, detected by the agent
+            and associated with a particular port."
+    SYNTAX      INTEGER {
+            portIdIfAlias(1),
+            portIdEntPhysicalAlias(2),
+            portIdMacAddr(3),
+            portIdPtopoGenAddr(4)
+    }
+
+PtopoPortId ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the format of a port identifier string.
+            Objects of this type are always used with an associated
+            PtopoPortIdType object, which identifies the format of the
+            particular PtopoPortId object instance.
+
+            If the associated PtopoPortIdType object has a value of
+            'portIdIfAlias(1)', then the octet string identifies a
+            particular instance of the ifAlias object.
+
+            If the associated PtopoPortIdType object has a value of
+            'portIdEntPhysicalAlias(2)', then the octet string
+            identifies a particular instance of the entPhysicalAlias
+            object for a port component (i.e., entPhysicalClass value of
+            'port(10)').
+
+            If the associated PtopoPortIdType object has a value of
+            'portIdMacAddr(3)', then this string identifies a particular
+            unicast source MAC address associated with the port.
+
+            If the associated PtopoPortIdType object has a value of
+            'portIdPtopoGenAddr(4)', then this string identifies a
+            network address associated with the port.  The first octet
+            contains the IANA AddressFamilyNumbers enumeration value for
+            the specific address type, and octets 2 through N contain
+
+            the PtopoGenAddr address value in network byte order."
+    SYNTAX      OCTET STRING (SIZE (1..32))
+
+PtopoAddrSeenState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "This TC describes the state of address detection for a
+            particular type of port identifier used in the PTOPO MIB.
+
+            The enumeration 'notUsed(1)' represents an entry for which
+            the particular MIB object is not applicable to the remote
+            connection endpoint,
+            The enumeration 'unknown(2)' represents an entry for which
+            the particular address collection state is not known.
+
+            The enumeration 'oneAddr(3)'  represents an entry for which
+            exactly one source address (of the type indicated by the
+            particular MIB object), has been detected.
+
+            The enumeration 'multiAddr(4)'  represents an entry for
+            which more than one source address (of the type indicated by
+            the particular MIB object), has been detected.
+
+            An agent is expected to set the initial state of the
+            PtopoAddrSeenState to 'notUsed(1)' or 'unknown(2)'.
+
+            Note that the PTOPO MIB does not restrict or specify the
+            means in which the PtopoAddrSeenState is known to an agent.
+            In particular, an agent may detect this information through
+            configuration data, or some means other than directly
+            monitoring all port traffic."
+    SYNTAX      INTEGER {
+            notUsed(1),
+            unknown(2),
+            oneAddr(3),
+            multiAddr(4)
+    }
+
+--  ***********************************************************
+--
+--           P T O P O    D A T A     G R O U P
+--
+--  ***********************************************************
+
+-- Connection Table
+
+ptopoConnTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PtopoConnEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains one or more rows per physical network
+            connection known to this agent.  The agent may wish to
+            ensure that only one ptopoConnEntry is present for each
+            local port, or it may choose to maintain multiple
+            ptopoConnEntries for the same local port.
+
+            Entries based on lower numbered identifier types are
+            preferred over higher numbered identifier types, i.e., lower
+            values of the ptopoConnRemoteChassisType and
+            ptopoConnRemotePortType objects."
+    ::= { ptopoData 1 }
+
+ptopoConnEntry       OBJECT-TYPE
+    SYNTAX      PtopoConnEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular physical network connection.
+            Entries may be created and deleted in this table, either
+            manually or by the agent, if a physical topology discovery
+            process is active."
+    INDEX   {
+           ptopoConnTimeMark,
+           ptopoConnLocalChassis,
+           ptopoConnLocalPort,
+           ptopoConnIndex
+    }
+    ::= { ptopoConnTable 1 }
+
+PtopoConnEntry ::= SEQUENCE {
+      ptopoConnTimeMark            TimeFilter,
+      ptopoConnLocalChassis        PhysicalIndex,
+      ptopoConnLocalPort           PhysicalIndex,
+      ptopoConnIndex               Integer32,
+      ptopoConnRemoteChassisType   PtopoChassisIdType,
+      ptopoConnRemoteChassis       PtopoChassisId,
+      ptopoConnRemotePortType      PtopoPortIdType,
+      ptopoConnRemotePort          PtopoPortId,
+      ptopoConnDiscAlgorithm       AutonomousType,
+      ptopoConnAgentNetAddrType    AddressFamilyNumbers,
+      ptopoConnAgentNetAddr        PtopoGenAddr,
+      ptopoConnMultiMacSASeen      PtopoAddrSeenState,
+      ptopoConnMultiNetSASeen      PtopoAddrSeenState,
+      ptopoConnIsStatic            TruthValue,
+      ptopoConnLastVerifyTime      TimeStamp,
+      ptopoConnRowStatus           RowStatus
+}
+
+ptopoConnTimeMark  OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A TimeFilter for this entry.  See the TimeFilter textual
+            convention in RFC 2021 to see how this works."
+    ::= { ptopoConnEntry 1 }
+
+ptopoConnLocalChassis  OBJECT-TYPE
+    SYNTAX      PhysicalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The entPhysicalIndex value used to identify the chassis
+            component associated with the local connection endpoint."
+    ::= { ptopoConnEntry 2 }
+
+ptopoConnLocalPort     OBJECT-TYPE
+    SYNTAX      PhysicalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The entPhysicalIndex value used to identify the port
+            component associated with the local connection endpoint."
+    ::= { ptopoConnEntry 3 }
+
+ptopoConnIndex    OBJECT-TYPE
+    SYNTAX      Integer32  (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This object represents an arbitrary local integer value
+            used by this agent to identify a particular connection
+            instance, unique only for the indicated local connection
+            endpoint.
+
+            A particular ptopoConnIndex value may be reused in the event
+            an entry is aged out and later re-learned with the same (or
+            different) remote chassis and port identifiers.
+
+            An agent is encouraged to assign monotonically increasing
+            index values to new entries, starting with one, after each
+
+            reboot.  It is considered unlikely that the ptopoConnIndex
+            will wrap between reboots."
+    ::= { ptopoConnEntry 4 }
+
+ptopoConnRemoteChassisType  OBJECT-TYPE
+    SYNTAX      PtopoChassisIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The type of encoding used to identify the chassis
+            associated with the remote connection endpoint.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    ::= { ptopoConnEntry 5 }
+
+ptopoConnRemoteChassis  OBJECT-TYPE
+    SYNTAX      PtopoChassisId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The string value used to identify the chassis component
+            associated with the remote connection endpoint.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    ::= { ptopoConnEntry 6 }
+
+ptopoConnRemotePortType  OBJECT-TYPE
+    SYNTAX      PtopoPortIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The type of port identifier encoding used in the associated
+            'ptopoConnRemotePort' object.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    ::= { ptopoConnEntry 7 }
+
+ptopoConnRemotePort  OBJECT-TYPE
+    SYNTAX      PtopoPortId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The string value used to identify the port component
+            associated with the remote connection endpoint.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    ::= { ptopoConnEntry 8 }
+
+ptopoConnDiscAlgorithm OBJECT-TYPE
+    SYNTAX      AutonomousType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An indication of the algorithm used to discover the
+            information contained in this conceptual row.
+
+            A value of ptopoDiscoveryLocal indicates this entry was
+            configured by the local agent, without use of a discovery
+            protocol.
+
+            A value of { 0 0 } indicates this entry was created manually
+            by an NMS via the associated RowStatus object. "
+    ::= { ptopoConnEntry 9 }
+
+ptopoConnAgentNetAddrType  OBJECT-TYPE
+    SYNTAX      AddressFamilyNumbers
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This network address type of the associated
+            ptopoConnNetAddr object, unless that object contains a zero
+            length string.  In such a case, an NMS application should
+            ignore any returned value for this object.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    ::= { ptopoConnEntry 10 }
+
+ptopoConnAgentNetAddr  OBJECT-TYPE
+    SYNTAX      PtopoGenAddr
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object identifies a network address which may be used
+            to reach an SNMP agent entity containing information for the
+            chassis and port components represented by the associated
+            'ptopoConnRemoteChassis' and 'ptopoConnRemotePort' objects.
+            If no such address is known, then this object shall contain
+            an empty string.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    ::= { ptopoConnEntry 11 }
+
+ptopoConnMultiMacSASeen  OBJECT-TYPE
+    SYNTAX      PtopoAddrSeenState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object indicates if multiple unicast source MAC
+            addresses have been detected by the agent from the remote
+            connection endpoint, since the creation of this entry.
+
+            If this entry has an associated ptopoConnRemoteChassisType
+            and/or ptopoConnRemotePortType value other than
+            'portIdMacAddr(3)', then the value 'notUsed(1)' is returned.
+
+            Otherwise, one of the following conditions must be true:
+
+            If the agent has not yet detected any unicast source MAC
+            addresses from the remote port, then the value 'unknown(2)'
+            is returned.
+
+            If the agent has detected exactly one unicast source MAC
+            address from the remote port, then the value 'oneAddr(3)' is
+            returned.
+
+            If the agent has detected more than one unicast source MAC
+            address from the remote port, then the value 'multiAddr(4)'
+            is returned."
+    ::= { ptopoConnEntry 12 }
+
+ptopoConnMultiNetSASeen  OBJECT-TYPE
+    SYNTAX      PtopoAddrSeenState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object indicates if multiple network layer source
+            addresses have been detected by the agent from the remote
+            connection endpoint, since the creation of this entry.
+
+            If this entry has an associated ptopoConnRemoteChassisType
+            or ptopoConnRemotePortType value other than
+            'portIdGenAddr(4)' then the value 'notUsed(1)' is returned.
+
+            Otherwise, one of the following conditions must be true:
+
+            If the agent has not yet detected any network source
+            addresses of the appropriate type from the remote port, then
+            the value 'unknown(2)' is returned.
+
+            If the agent has detected exactly one network source address
+            of the appropriate type from the remote port, then the value
+            'oneAddr(3)' is returned.
+
+            If the agent has detected more than one network source
+            address (of the same appropriate type) from the remote port,
+            this the value 'multiAddr(4)' is returned."
+    ::= { ptopoConnEntry 13 }
+
+ptopoConnIsStatic  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object identifies static ptopoConnEntries.  If this
+            object has the value 'true(1)', then this entry is not
+            subject to any age-out mechanisms implemented by the agent.
+
+            If this object has the value 'false(2)', then this entry is
+            subject to all age-out mechanisms implemented by the agent.
+
+            This object may not be modified if the associated
+            ptopoConnRowStatus object has a value of active(1)."
+    DEFVAL { false }
+    ::= { ptopoConnEntry 14 }
+
+ptopoConnLastVerifyTime  OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "If the associated value of ptopoConnIsStatic is equal to
+            'false(2)', then this object contains the value of sysUpTime
+            at the time the conceptual row was last verified by the
+            agent, e.g., via reception of a topology protocol message,
+            pertaining to the associated remote chassis and port.
+
+            If the associated value of ptopoConnIsStatic is equal to
+            'true(1)', then this object shall contain the value of
+            sysUpTime at the time this entry was last activated (i.e.,
+            ptopoConnRowStatus set to 'active(1)')."
+    ::= { ptopoConnEntry 15 }
+
+ptopoConnRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The status of this conceptual row."
+    ::= { ptopoConnEntry 16 }
+
+--  ***********************************************************
+--
+--           P T O P O    G E N E R A L     G R O U P
+--
+--  ***********************************************************
+
+-- last change time stamp for the whole MIB
+
+ptopoLastChangeTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time a conceptual row is
+            created, modified, or deleted in the ptopoConnTable.
+
+            An NMS can use this object to reduce polling of the
+            ptopoData group objects."
+    ::= { ptopoGeneral 1 }
+
+ptopoConnTabInserts OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "table entries"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times an entry has been inserted into the
+            ptopoConnTable."
+    ::= { ptopoGeneral 2 }
+
+ptopoConnTabDeletes OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "table entries"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times an entry has been deleted from the
+            ptopoConnTable."
+    ::= { ptopoGeneral 3 }
+
+ptopoConnTabDrops OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "table entries"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times an entry would have been added to the
+            ptopoConnTable, (e.g., via information learned from a
+            topology protocol), but was not because of insufficient
+            resources."
+    ::= { ptopoGeneral 4 }
+
+ptopoConnTabAgeouts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times an entry has been deleted from the
+            ptopoConnTable because the information timeliness interval
+            for that entry has expired."
+    ::= { ptopoGeneral 5 }
+
+--  ***********************************************************
+--
+--           P T O P O    C O N F I G     G R O U P
+--
+--  ***********************************************************
+
+ptopoConfigTrapInterval OBJECT-TYPE
+    SYNTAX      Integer32 (0 | 5..3600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object controls the transmission of PTOPO
+            notifications.
+
+            If this object has a value of zero, then no
+            ptopoConfigChange notifications will be transmitted by the
+            agent.
+
+            If this object has a non-zero value, then the agent must not
+            generate more than one ptopoConfigChange trap-event in the
+            indicated period, where a 'trap-event' is the transmission
+            of a single notification PDU type to a list of notification
+            destinations.  If additional configuration changes occur
+            within the indicated throttling period, then these trap-
+            events must be suppressed by the agent. An NMS should
+            periodically check the value of ptopoLastChangeTime to
+            detect any missed ptopoConfigChange trap-events, e.g. due to
+            throttling or transmission loss.
+
+            If notification transmission is enabled, the suggested
+            default throttling period is 60 seconds, but transmission
+            should be disabled by default.
+
+            If the agent is capable of storing non-volatile
+            configuration, then the value of this object must be
+            restored after a re-initialization of the management
+            system."
+    DEFVAL { 0 }
+    ::= { ptopoConfig 1 }
+
+ptopoConfigMaxHoldTime OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object specifies the desired time interval for which
+            an agent will maintain dynamic ptopoConnEntries.
+
+            After the specified number of seconds since the last time an
+            entry was verified, in the absence of new verification
+            (e.g., receipt of a topology protocol message), the agent
+            shall remove the entry.  Note that entries may not always be
+            removed immediately, but may possibly be removed at periodic
+            garbage collection intervals.
+            This object only affects dynamic ptopoConnEntries, i.e.  for
+            which ptopoConnIsStatic equals 'false(2)'. Static entries
+            are not aged out.
+
+            Note that dynamic ptopoConnEntries may also be removed by
+            the agent due to the expired timeliness of learned topology
+            information (e.g., timeliness interval for a remote port
+            expires).  The actual age-out interval for a given entry is
+            defined by the following formula:
+
+              age-out-time =
+                min(ptopoConfigMaxHoldTime, <entry-specific hold-time>)
+
+            where <entry-specific hold-time> is determined by the
+            discovery algorithm, and may be different for each entry."
+    DEFVAL { 300 }
+    ::= { ptopoConfig 2 }
+
+-- PTOPO MIB Notification Definitions
+ptopoMIBNotifications  OBJECT IDENTIFIER ::= { ptopoMIB 2 }
+ptopoMIBTrapPrefix     OBJECT IDENTIFIER ::=
+
+      { ptopoMIBNotifications 0 }
+
+ptopoConfigChange NOTIFICATION-TYPE
+    OBJECTS       {
+             ptopoConnTabInserts,
+             ptopoConnTabDeletes,
+             ptopoConnTabDrops,
+             ptopoConnTabAgeouts
+    }
+    STATUS        current
+    DESCRIPTION
+            "A ptopoConfigChange notification is sent when the value of
+            ptopoLastChangeTime changes. It can be utilized by an NMS to
+            trigger physical topology table maintenance polls.
+
+            Note that transmission of ptopoConfigChange notifications
+            are throttled by the agent, as specified by the
+            'ptopoConfigTrapInterval' object."
+   ::= { ptopoMIBTrapPrefix 1 }
+
+-- PTOPO Registration Points
+ptopoRegistrationPoints  OBJECT IDENTIFIER ::= { ptopoMIB 3 }
+
+-- values used with ptopoConnDiscAlgorithm object
+ptopoDiscoveryMechanisms OBJECT IDENTIFIER ::=
+      { ptopoRegistrationPoints 1 }
+
+ptopoDiscoveryLocal      OBJECT IDENTIFIER ::=
+      { ptopoDiscoveryMechanisms 1 }
+
+-- conformance information
+ptopoConformance OBJECT IDENTIFIER ::= { ptopoMIB 4 }
+
+ptopoCompliances OBJECT IDENTIFIER ::= { ptopoConformance 1 }
+ptopoGroups      OBJECT IDENTIFIER ::= { ptopoConformance 2 }
+
+-- compliance statements
+ptopoCompliance MODULE-COMPLIANCE
+   STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which implement
+            the PTOPO MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS {
+              ptopoDataGroup,
+              ptopoGeneralGroup,
+              ptopoConfigGroup,
+              ptopoNotificationsGroup
+        }
+    ::= { ptopoCompliances 1 }
+
+-- MIB groupings
+ptopoDataGroup   OBJECT-GROUP
+    OBJECTS {
+         ptopoConnRemoteChassisType,
+         ptopoConnRemoteChassis,
+         ptopoConnRemotePortType,
+         ptopoConnRemotePort,
+         ptopoConnDiscAlgorithm,
+         ptopoConnAgentNetAddrType,
+         ptopoConnAgentNetAddr,
+         ptopoConnMultiMacSASeen,
+         ptopoConnMultiNetSASeen,
+         ptopoConnIsStatic,
+         ptopoConnLastVerifyTime,
+         ptopoConnRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to represent
+            physical topology information for which a single agent
+            provides management information.
+
+            This group is mandatory for all implementations of the PTOPO
+            MIB."
+    ::= { ptopoGroups 1 }
+
+ptopoGeneralGroup    OBJECT-GROUP
+    OBJECTS {
+         ptopoLastChangeTime,
+         ptopoConnTabInserts,
+         ptopoConnTabDeletes,
+         ptopoConnTabDrops,
+         ptopoConnTabAgeouts
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to report the
+            general status of the PTOPO MIB implementation.
+
+            This group is mandatory for all agents which implement the
+            PTOPO MIB."
+    ::= { ptopoGroups 2 }
+
+ptopoConfigGroup    OBJECT-GROUP
+    OBJECTS {
+         ptopoConfigTrapInterval,
+         ptopoConfigMaxHoldTime
+    }
+    STATUS  current
+    DESCRIPTION
+            "The collection of objects which are used to configure the
+            PTOPO MIB implementation behavior.
+
+            This group is mandatory for agents which implement the PTOPO
+            MIB."
+    ::= { ptopoGroups 3 }
+
+ptopoNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+         ptopoConfigChange
+    }
+    STATUS        current
+    DESCRIPTION
+            "The collection of notifications used to indicate PTOPO MIB
+            data consistency and general status information.
+
+            This group is mandatory for agents which implement the PTOPO
+            MIB."
+    ::= { ptopoGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/PW-ATM-MIB.mib b/snmp_builder/mibs/PW-ATM-MIB.mib
new file mode 100644
index 0000000..07dc525
--- /dev/null
+++ b/snmp_builder/mibs/PW-ATM-MIB.mib
@@ -0,0 +1,1205 @@
+PW-ATM-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Counter32, Unsigned32, mib-2
+          FROM SNMPv2-SMI
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+          FROM SNMPv2-CONF
+
+    TruthValue, RowStatus, RowPointer
+          FROM SNMPv2-TC
+
+    PerfCurrentCount, PerfIntervalCount
+          FROM PerfHist-TC-MIB
+
+    InterfaceIndex
+          FROM IF-MIB
+
+    pwIndex
+          FROM PW-STD-MIB
+
+    AtmVpIdentifier, AtmVcIdentifier
+          FROM ATM-TC-MIB;
+
+      pwAtmMIB MODULE-IDENTITY
+      LAST-UPDATED "200906160000Z"  -- 16 June 2009
+      ORGANIZATION "Pseudowire Emulation Edge-to-Edge (PWE3)
+                    Working Group"
+      CONTACT-INFO
+          "Thomas D. Nadeau
+           Postal: BT
+                   BT Centre
+                   81 Newgate Street
+                   London  EC1A 7AJ
+                   United Kingdom
+
+           Email:  tom.nadeau@bt.com
+
+           Orly Nicklass
+           Postal: RADVISION Ltd.
+                  24 Raul Wallenberg
+                  Tel Aviv, Israel
+           Email: orlyn@radvision.com
+
+           Discussion and general questions should be posed to
+           the PWE3 Working Group (pwe3@ietf.org)."
+      DESCRIPTION
+          "This MIB contains managed object definitions for
+           pseudowire emulation of ATM over Packet Switched
+           Networks (PSNs).
+
+           This MIB supplements the PW-STD-MIB module.
+           The PW-STD-MIB contains structures and MIB associations
+           generic to pseudowire (PW) emulation.  PW-specific
+           MIBs (such as this) contain config and stats for specific
+           PW types.
+
+           Copyright (c) 2009 IETF Trust and the persons identified as
+           authors of the code.  All rights reserved.
+
+           Redistribution and use in source and binary forms, with or
+           without modification, are permitted provided that the
+           following conditions are met:
+
+           - Redistributions of source code must retain the above
+             copyright notice, this list of conditions and the
+             following disclaimer.
+
+           - Redistributions in binary form must reproduce the above
+             copyright notice, this list of conditions and the
+             following disclaimer in the documentation and/or other
+             materials provided with the distribution.
+
+           - Neither the name of Internet Society, IETF or IETF Trust,
+             nor the names of specific contributors, may be used to
+             endorse or promote products derived from this software
+             without specific prior written permission.
+
+           THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+           CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+           INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+           MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+           DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+
+           CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+           SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+           NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+           LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+           HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+           CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+           OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+           SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+           This version of this MIB module is part of RFC 5605;
+           see the RFC itself for full legal notices.
+           "
+
+      -- Revision history.
+
+      REVISION "200906160000Z"  -- 16 June 2009
+      DESCRIPTION "Initial version published as RFC 5605."
+         ::= { mib-2 183 }
+
+    -- Top-level components of this MIB
+
+    pwAtmNotifications OBJECT IDENTIFIER ::= { pwAtmMIB 0 }
+    pwAtmObjects       OBJECT IDENTIFIER ::= { pwAtmMIB 1 }
+    pwAtmConformance   OBJECT IDENTIFIER ::= { pwAtmMIB 2 }
+
+-- ATM PW PSN Bound(Outbound) Table for 1 to 1 connection
+
+pwAtmOutboundTable OBJECT-TYPE
+    SYNTAX    SEQUENCE OF PwAtmOutboundEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "This table specifies the information for an ATM PW to
+        be carried over the PSN in the outbound direction.  An
+        entry is created in this table for every entry in
+        the pwTable with a pwType equal to one of the following:
+        atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13)
+        or atmAal5PduVcc(14), or atmTransparent(3)."
+    ::= { pwAtmObjects 1 }
+
+pwAtmOutboundEntry OBJECT-TYPE
+    SYNTAX        PwAtmOutboundEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A row in this table represents an ATM PW that needs to be
+         adapted and carried over the PSN.  This table is indexed by
+
+         pwIndex from pwTable.  Unless otherwise specified, all
+         writeable objects in this table MUST NOT be changed after
+         row activation in the generic pwTable, and values must
+         persist after reboot."
+    REFERENCE
+      "See [PWMIB]."
+    INDEX { pwIndex }
+    ::= { pwAtmOutboundTable 1 }
+
+PwAtmOutboundEntry ::= SEQUENCE {
+      pwAtmOutboundAtmIf                InterfaceIndex,
+      pwAtmOutboundVpi                  AtmVpIdentifier,
+      pwAtmOutboundVci                  AtmVcIdentifier,
+      pwAtmOutboundTrafficParamDescr    RowPointer,
+      pwAtmOutboundRowStatus            RowStatus
+      }
+
+pwAtmOutboundAtmIf OBJECT-TYPE
+    SYNTAX        InterfaceIndex
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The ATM Interface that receives cells from the ATM
+        network."
+    ::= { pwAtmOutboundEntry 1 }
+
+pwAtmOutboundVpi OBJECT-TYPE
+    SYNTAX        AtmVpIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "VPI value of this ATM PW.  The value may indicate the
+        translated value when egress generates new VPI."
+    ::= { pwAtmOutboundEntry 2 }
+
+pwAtmOutboundVci OBJECT-TYPE
+    SYNTAX        AtmVcIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "VCI value of this ATM PW.  The value may indicate the
+        translated value when egress generates new VCI."
+    ::= { pwAtmOutboundEntry 3 }
+
+pwAtmOutboundTrafficParamDescr OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object represents a pointer to an ATM
+         traffic-parameter-specific row in either a private or
+         standard table that will be employed while receiving
+         cells from the ATM network.  This row should contain a
+         set of self-consistent ATM traffic parameters including
+         the ATM traffic service category.
+         A value of 0.0 indicates Best Effort."
+     ::= { pwAtmOutboundEntry 4 }
+
+pwAtmOutboundRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object is used to create, modify, or delete a row in
+         this table.  Unless otherwise specified, all writeable
+         objects in this table MUST NOT be changed after row
+         activation as explained in the pwAtmOutboundEntry. "
+    ::= { pwAtmOutboundEntry 5 }
+
+-- End of ATM PW Outbound Table
+
+-- ATM PW CE Bound(Inbound) Table for 1 to 1 mode
+
+pwAtmInboundTable OBJECT-TYPE
+    SYNTAX    SEQUENCE OF PwAtmInboundEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "This table specifies the information for an ATM PW in the
+         inbound direction."
+    ::= { pwAtmObjects 3 }
+
+pwAtmInboundEntry OBJECT-TYPE
+    SYNTAX    PwAtmInboundEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A row in this table represents an ATM PW that needs to be
+         sent into the ATM network after reconstructing cells from
+         packets received from a PSN.  This table is indexed by
+         pwIndex from pwTable.  An entry is created in this table
+         for every entry in the pwTable with a
+         pwType equal to one of the following:
+         atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13),
+         atmAal5PduVcc(14), or atmTransparent(3).  Unless otherwise
+
+         specified, all writeable objects in this table MUST NOT
+         be changed after row activation in the generic pwTable,
+         and values must persist after reboot."
+    REFERENCE
+      "See [PWMIB]."
+    INDEX { pwIndex }
+    ::= { pwAtmInboundTable 1 }
+
+PwAtmInboundEntry ::= SEQUENCE {
+      pwAtmInboundAtmIf                 InterfaceIndex,
+      pwAtmInboundVpi                   AtmVpIdentifier,
+      pwAtmInboundVci                   AtmVcIdentifier,
+      pwAtmInboundTrafficParamDescr     RowPointer,
+      pwAtmInboundRowStatus             RowStatus
+          }
+
+pwAtmInboundAtmIf OBJECT-TYPE
+    SYNTAX        InterfaceIndex
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The ATM Interface that sends cells into the ATM network
+        after reconstructing cells from packets received from
+        a PSN."
+    ::= { pwAtmInboundEntry 1 }
+
+pwAtmInboundVpi OBJECT-TYPE
+    SYNTAX        AtmVpIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "VPI value of this ATM PW.
+         If the pwType is atmTransparent, then the value will
+         be set to zero."
+        ::= { pwAtmInboundEntry 2 }
+
+pwAtmInboundVci OBJECT-TYPE
+    SYNTAX        AtmVcIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "VCI value of this ATM PW.
+         If the pwType is atmTransparent, atmCell1to1Vpc, or
+         atmCellNto1Vpc, then the value will be set to zero."
+        ::= { pwAtmInboundEntry 3 }
+
+pwAtmInboundTrafficParamDescr OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object represents a pointer to an ATM traffic-parameter-
+         specific row in either a private or standard table that will
+         be employed while transmitting into the ATM network.  This
+         table contains a set of self-consistent ATM traffic parameters
+         including the ATM traffic service category.  A value of 0.0
+         indicates Best Effort."
+        ::= { pwAtmInboundEntry 4 }
+
+pwAtmInboundRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+        DESCRIPTION
+        "This object is used to create, modify, or delete a row in
+         this table.  Unless otherwise specified, all writeable
+         objects in this table MUST NOT be changed after row
+         activation as explained in the pwAtmInboundEntry. "
+        ::= { pwAtmInboundEntry 5 }
+
+-- End of ATM PW Inbound Table
+
+--Generic ATM PW table for all types of ATM PW connection.
+
+pwAtmCfgTable OBJECT-TYPE
+    SYNTAX    SEQUENCE OF PwAtmCfgEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "This table specifies generic information for an ATM PW
+         to be carried over PSN in any mode."
+    ::= { pwAtmObjects 5 }
+
+    pwAtmCfgEntry OBJECT-TYPE
+    SYNTAX        PwAtmCfgEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+         "This table contains a set of parameters for
+         the ATM PW that needs to be adapted and carried
+         over the PSN.  This table is indexed by pwIndex from
+         pwTable.  An entry is created for every new ATM
+         type associated pwIndex in the pwTable.  Unless
+         otherwise specified, all read-write objects in
+
+         this table MAY be changed when the PW is defined
+         as not active, and all RW objects values must
+         persist after reboot."
+    REFERENCE
+      "See [PWMIB]."
+    INDEX { pwIndex }
+    ::= { pwAtmCfgTable 1 }
+
+PwAtmCfgEntry ::= SEQUENCE {
+        pwAtmCfgMaxCellConcatenation       Unsigned32,
+        pwAtmCfgFarEndMaxCellConcatenation Unsigned32,
+        pwAtmCfgTimeoutMode                INTEGER,
+        pwAtmClpQosMapping                 TruthValue
+                }
+
+pwAtmCfgMaxCellConcatenation OBJECT-TYPE
+     SYNTAX        Unsigned32 (1..29)
+     MAX-ACCESS    read-write
+     STATUS        current
+     DESCRIPTION
+         "The maximum number of ATM cells that can be
+          concatenated into one PW packet towards the PSN.
+          In a non-LDP or other signaling protocol environment,
+          this object MAY be changed at anytime, but traffic
+          might be interrupted; otherwise, it may be changed
+          when PW is not active."
+    ::= { pwAtmCfgEntry 1 }
+
+pwAtmCfgFarEndMaxCellConcatenation OBJECT-TYPE
+     SYNTAX        Unsigned32 (1..29)
+     MAX-ACCESS    read-write
+     STATUS        current
+     DESCRIPTION
+         "The maximum number of ATM cells that can be
+          concatenated into one PW packet towards PSN as reported by
+          the far end.  If there is no LDP in use, the object will
+          either return a value of 0 or allow setting it for calculating
+          protocol overhead."
+    ::= { pwAtmCfgEntry 2 }
+
+pwAtmCfgTimeoutMode OBJECT-TYPE
+     SYNTAX        INTEGER
+                        {
+                         notApplicable (1),
+                         disabled      (2),
+                         enabled       (3)
+                        }
+     MAX-ACCESS    read-write
+     STATUS        current
+     DESCRIPTION
+         "This object determines whether or not a packet can be
+          transmitted to the PSN based on timeout expiration
+          for collecting cells.  The actual handling of the
+          timeout is implementation-specific; as such,
+          this object may be changed at any time under proper
+          consideration of the traffic interruption effect."
+    ::= { pwAtmCfgEntry 3 }
+
+pwAtmClpQosMapping OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+        "This object indicates whether the Cell Loss Priority
+         (CLP) bits should be considered when setting the
+         value in the Quality-of-Service fields of the
+         encapsulating protocol (e.g., EXP fields of the
+         MPLS Label Stack).  Selecting True allows the drop
+         precedence to be preserved across the PSN.  In
+         transparent cell transport, the value of this object
+         MUST be false(2); in other cases, it can be changed
+         at any time."
+    REFERENCE
+      "See section 12 of [ATMENCAP]."
+    ::= { pwAtmCfgEntry 4 }
+
+-- Device capable of implementing N:1, 1:1, and transparent cell
+-- mode assumes to support the N:1 table for all
+-- modes with respective applicable setting.
+-- In such implementation, user can create an entry for either
+-- 1:1 or transparent cell transport modes only
+-- in pwAtmInboundNto1Table. The side effect of such
+-- will be an automatic create of the respective line in the
+-- pwAtmOutboundNto1Table.
+
+-- ATM PW Outbound Table for N to 1 connection
+
+pwAtmOutboundNto1Table OBJECT-TYPE
+    SYNTAX    SEQUENCE OF PwAtmOutboundNto1Entry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "This table specifies the information for an ATM PW to
+        be carried over the PSN in the outbound direction.  Up to
+        N entries can be created in this table for every
+
+        entry in the pwTable with a pwType equal to:
+        atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
+        An entry can be created only when the VP/VC are known.
+        A single entry will be created in this table for every
+        entry in the pwTable with a pwType equal to
+        one of the following: atmCell1to1Vcc(12),
+        atmCell1to1Vpc(13), atmAal5PduVcc(14),
+        atmAal5SduVcc(2), or atmTransparent(3).
+        "
+    ::= { pwAtmObjects 6 }
+
+pwAtmOutboundNto1Entry OBJECT-TYPE
+    SYNTAX        PwAtmOutboundNto1Entry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A row in this table represents an ATM PW that needs to be
+         adapted and carried over PSN.  This table is indexed by
+         pwIndex from pwTable and the ATM interface with VPL/VCLs.
+         In atmTransparent(3), Vpi and VCi will be 0xFFFF
+         during set operation.
+         Unless otherwise specified, all read-create objects in this
+         table MUST NOT be changed after row activation
+         and SHOULD remain unchanged after reboot."
+    INDEX { pwIndex, pwAtmOutboundNto1AtmIf ,
+                        pwAtmOutboundNto1Vpi,
+                        pwAtmOutboundNto1Vci  }
+    ::= { pwAtmOutboundNto1Table 1 }
+
+PwAtmOutboundNto1Entry ::= SEQUENCE {
+      pwAtmOutboundNto1AtmIf                    InterfaceIndex,
+      pwAtmOutboundNto1Vpi                      AtmVpIdentifier,
+      pwAtmOutboundNto1Vci                      AtmVcIdentifier,
+      pwAtmOutboundNto1RowStatus                RowStatus,
+      pwAtmOutboundNto1TrafficParamDescr        RowPointer,
+      pwAtmOutboundNto1MappedVpi                AtmVpIdentifier,
+      pwAtmOutboundNto1MappedVci                AtmVcIdentifier
+     }
+
+pwAtmOutboundNto1AtmIf OBJECT-TYPE
+    SYNTAX        InterfaceIndex
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "The ATM Interface that receives cells from the ATM network."
+    ::= { pwAtmOutboundNto1Entry 1 }
+
+pwAtmOutboundNto1Vpi OBJECT-TYPE
+    SYNTAX        AtmVpIdentifier
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "VPI value of this ATM PW.  In atmTransparent(3),
+         Vpi will be the equivalent of 0xFFFF."
+    ::= { pwAtmOutboundNto1Entry 2 }
+
+pwAtmOutboundNto1Vci OBJECT-TYPE
+    SYNTAX        AtmVcIdentifier
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "VCI value of this ATM PW.  In atmTransparent(3), or
+         the VP case, the value will be the equivalent of
+         0xFFFF."
+    ::= { pwAtmOutboundNto1Entry 3 }
+
+pwAtmOutboundNto1RowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object is used to create, modify or delete a row in
+         this table."
+    ::= { pwAtmOutboundNto1Entry 4 }
+
+pwAtmOutboundNto1TrafficParamDescr OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object represents a pointer to an ATM traffic-parameter-
+         specific row in either private or standard table that will
+         be employed while receiving cells from the ATM network.
+         This table should contain a set
+         of self-consistent ATM traffic parameters including the ATM
+         traffic service category.  A value of 0.0 indicates Best
+         Effort."
+    ::= { pwAtmOutboundNto1Entry 5 }
+
+pwAtmOutboundNto1MappedVpi         OBJECT-TYPE
+    SYNTAX        AtmVpIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The egress-generated VPI value of this ATM PW.  The
+
+        entry is valid for PW type of atmCellNto1Vcc(9),
+        atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
+        atmCell1to1Vpc(13).  In other types, the value will be the
+        equivalent of 0xFFFF.  Value MAY be changed when the
+        PW is defined as not active. "
+    ::= { pwAtmOutboundNto1Entry 6 }
+
+pwAtmOutboundNto1MappedVci      OBJECT-TYPE
+    SYNTAX        AtmVcIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The egress-generated VCI value of this ATM PW.  The
+        entry is valid for PW type of atmCellNto1Vcc(9),
+        atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
+        atmCell1to1Vpc(13.  In the VP case or other types, the
+        value will be the equivalent of 0xFFFF.
+        Value MAY be changed when the PW is defined
+        as not active."
+    ::= { pwAtmOutboundNto1Entry 7 }
+
+-- ATM PW Inbound Table for N to 1 connection
+
+pwAtmInboundNto1Table OBJECT-TYPE
+    SYNTAX    SEQUENCE OF PwAtmInboundNto1Entry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "This table specifies the information for an ATM PW to
+        be carried over PSN in the Inbound direction.  Up to
+        N entries can be created in this table for every
+        entry in the pwTable with a pwType equal to:
+        atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
+        An entry can be created only when the VP/VC are known.
+        A single entry will be created in this table for every
+        entry in the pwTable with a pwType equal to
+        one of the following: atmCell1to1Vcc(12),
+        atmCell1to1Vpc(13), atmAal5PduVcc(14),
+        atmAal5SduVcc(2), or atmTransparent(3)."
+    ::= { pwAtmObjects 7 }
+
+pwAtmInboundNto1Entry OBJECT-TYPE
+    SYNTAX        PwAtmInboundNto1Entry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "A row in this table represents an ATM PW that needs to be
+         adapted and carried over PSN.  This table is indexed by
+
+         pwIndex from pwTable and the ATM interface with VPL/VCLs.
+         In atmTransparent(3), Vpi and VCi will be 0xFFFF
+         during set operation.
+         Unless otherwise specified, all Read-Create objects in this
+         table MUST NOT be changed after row activation
+         and SHOULD remain unchanged after reboot."
+    INDEX { pwIndex, pwAtmInboundNto1AtmIf ,
+                        pwAtmInboundNto1Vpi,
+                        pwAtmInboundNto1Vci
+                        }
+    ::= { pwAtmInboundNto1Table 1 }
+
+PwAtmInboundNto1Entry ::= SEQUENCE {
+      pwAtmInboundNto1AtmIf                InterfaceIndex,
+      pwAtmInboundNto1Vpi                  AtmVpIdentifier,
+      pwAtmInboundNto1Vci                  AtmVcIdentifier,
+      pwAtmInboundNto1RowStatus            RowStatus,
+      pwAtmInboundNto1TrafficParamDescr    RowPointer,
+      pwAtmInboundNto1MappedVpi            AtmVpIdentifier,
+      pwAtmInboundNto1MappedVci            AtmVcIdentifier
+    }
+
+pwAtmInboundNto1AtmIf OBJECT-TYPE
+    SYNTAX        InterfaceIndex
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "The ATM Interface that receives cells from the ATM network."
+    ::= { pwAtmInboundNto1Entry 1 }
+
+pwAtmInboundNto1Vpi OBJECT-TYPE
+    SYNTAX        AtmVpIdentifier
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "VPI value of this ATM PW.  In atmTransparent(3),
+         Vpi will be the equivalent of 0xFFFF."
+    ::= { pwAtmInboundNto1Entry 2 }
+
+pwAtmInboundNto1Vci OBJECT-TYPE
+    SYNTAX        AtmVcIdentifier
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "VCI value of this ATM PW.  In atmTransparent(3), or
+         the VP case, the value will be the equivalent of
+         0xFFFF."
+    ::= { pwAtmInboundNto1Entry 3 }
+
+pwAtmInboundNto1RowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object is used to create, modify, or delete a row in
+        this table."
+    ::= { pwAtmInboundNto1Entry 4 }
+
+pwAtmInboundNto1TrafficParamDescr OBJECT-TYPE
+    SYNTAX        RowPointer
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "This object represents a pointer to an ATM traffic-parameter-
+         specific row in either a private or standard table that will
+         be employed while receiving cells from the ATM network.
+         This table should contain a set
+         of self-consistent ATM traffic parameters including the ATM
+         traffic service category.  A value of 0.0 indicates Best
+         Effort."
+    ::= { pwAtmInboundNto1Entry 5 }
+
+pwAtmInboundNto1MappedVpi    OBJECT-TYPE
+    SYNTAX        AtmVpIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The generated VPI value of this ATM PW.  The
+        entry is valid for PW type of atmCellNto1Vcc(9),
+        atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
+        atmCell1to1Vpc(13).  In other types, the value will be the
+        equivalent of 0xFFFF.  Value MAY be changed when the
+        PW is defined as not active."
+    ::= { pwAtmInboundNto1Entry 6 }
+
+pwAtmInboundNto1MappedVci     OBJECT-TYPE
+    SYNTAX        AtmVcIdentifier
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+        "The generated VCI value of this ATM PW.  The
+        entry is valid for PW type of atmCellNto1Vcc(9),
+        atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
+        atmCell1to1Vpc(13.  In the VP case or other types, the
+        value will be the equivalent of 0xFFFF.
+        Value MAY be changed when the
+
+        PW is defined as not active."
+    ::= { pwAtmInboundNto1Entry 7 }
+
+-- ATM PW Outbound Perf Table
+
+-- The following supplement the counters presented in the
+-- PW generic MIB
+
+-- ATM PW Performance Current Table.
+
+pwAtmPerfCurrentTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwAtmPerfCurrentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "The current 15-minute interval counts are in
+       this table.
+       This table provides performance information per ATM PW."
+  ::= { pwAtmObjects 8 }
+
+pwAtmPerfCurrentEntry OBJECT-TYPE
+  SYNTAX        PwAtmPerfCurrentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "An entry in this table is created by the agent for every
+       pwAtmCfgTable entry.  After 15 minutes, the contents of this
+       table entry are copied to a new entry in the
+       pwAtmPerfInterval table and the counts in this entry
+       are reset to zero."
+  INDEX  { pwIndex }
+  ::= { pwAtmPerfCurrentTable 1 }
+
+PwAtmPerfCurrentEntry ::= SEQUENCE {
+     pwAtmPerfCurrentMissingPkts    PerfCurrentCount,
+     pwAtmPerfCurrentPktsReOrder    PerfCurrentCount,
+     pwAtmPerfCurrentPktsMisOrder   PerfCurrentCount,
+     pwAtmPerfCurrentPktsTimeout    PerfCurrentCount,
+     pwAtmPerfCurrentCellsXmit      PerfCurrentCount,
+     pwAtmPerfCurrentCellsDropped   PerfCurrentCount,
+     pwAtmPerfCurrentCellsReceived  PerfCurrentCount,
+     pwAtmPerfCurrentUnknownCells   PerfCurrentCount
+  }
+
+pwAtmPerfCurrentMissingPkts OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of missing packets (as detected via control word
+       sequence number gaps)."
+  ::= { pwAtmPerfCurrentEntry 1 }
+
+pwAtmPerfCurrentPktsReOrder OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of sequence (via control
+       word sequence number), but successfully re-ordered.
+       Note: some implementations may not support this feature."
+  ::= { pwAtmPerfCurrentEntry 2 }
+
+pwAtmPerfCurrentPktsMisOrder OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of order (via control word
+       sequence numbers)."
+   ::= { pwAtmPerfCurrentEntry 3 }
+
+pwAtmPerfCurrentPktsTimeout OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets transmitted due to timeout expiration
+       while attempting to collect cells."
+   ::= { pwAtmPerfCurrentEntry 4 }
+
+pwAtmPerfCurrentCellsXmit OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of transmitted cells."
+   ::= { pwAtmPerfCurrentEntry 5 }
+
+pwAtmPerfCurrentCellsDropped OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of dropped cells."
+   ::= { pwAtmPerfCurrentEntry 6 }
+
+pwAtmPerfCurrentCellsReceived OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of received cells."
+   ::= { pwAtmPerfCurrentEntry 7 }
+
+pwAtmPerfCurrentUnknownCells OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of cells received from the PSN with unknown VPI or
+      VCI values.  This object is relevant only in N:1 mode."
+   ::= { pwAtmPerfCurrentEntry 8 }
+
+-- End ATM PW Performance Current Interval Table
+
+-- ATM PW Performance Interval Table.
+
+pwAtmPerfIntervalTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwAtmPerfIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "This table provides performance information per ATM PW
+       similar to the pwAtmPerfCurrentTable above.  However,
+       these counts represent historical 15 minute intervals.
+       Typically, this table will have a maximum of 96 entries
+       for a 24 hour period. "
+  ::= { pwAtmObjects 9 }
+
+pwAtmPerfIntervalEntry OBJECT-TYPE
+  SYNTAX        PwAtmPerfIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "An entry in this table is created by the agent for
+       every pwAtmPerfCurrentEntry that is 15 minutes old.
+       The contents of the Current entry are copied to the new
+       entry here.  The Current entry then resets its counts
+       to zero for the next current 15 minute interval. "
+  INDEX  { pwIndex, pwAtmPerfIntervalNumber }
+  ::= { pwAtmPerfIntervalTable 1 }
+
+PwAtmPerfIntervalEntry ::= SEQUENCE {
+     pwAtmPerfIntervalNumber         Unsigned32,
+     pwAtmPerfIntervalValidData      TruthValue,
+     pwAtmPerfIntervalDuration       Unsigned32,
+     pwAtmPerfIntervalMissingPkts    PerfIntervalCount,
+     pwAtmPerfIntervalPktsReOrder    PerfIntervalCount,
+     pwAtmPerfIntervalPktsMisOrder   PerfIntervalCount,
+     pwAtmPerfIntervalPktsTimeout    PerfIntervalCount,
+     pwAtmPerfIntervalCellsXmit      PerfIntervalCount,
+     pwAtmPerfIntervalCellsDropped   PerfIntervalCount,
+     pwAtmPerfIntervalCellsReceived  PerfIntervalCount,
+     pwAtmPerfIntervalUnknownCells   PerfIntervalCount
+     }
+
+pwAtmPerfIntervalNumber OBJECT-TYPE
+  SYNTAX        Unsigned32 (1..96)
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "A number (normally between 1 and 96 to cover a 24 hour
+       period) that identifies the interval for which the set
+       of statistics is available.  The interval identified by 1
+       is the most recently completed 15 minute interval, and
+       the interval identified by N is the interval immediately
+       preceding the one identified by N-1.  The minimum range of
+       N is 1 through 4.  The default range is 1 through 32.  The
+       maximum value of N is 96."
+  ::= { pwAtmPerfIntervalEntry 1 }
+
+pwAtmPerfIntervalValidData OBJECT-TYPE
+  SYNTAX        TruthValue
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "This variable indicates if the data for this interval
+       is valid."
+  ::= { pwAtmPerfIntervalEntry 2 }
+
+pwAtmPerfIntervalDuration OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The duration of a particular interval in seconds.
+      Adjustments in the system's time-of-day clock, may
+      cause the interval to be greater or less than the
+      normal value.  Therefore, this actual interval value
+      is provided."
+   ::= { pwAtmPerfIntervalEntry 3 }
+
+pwAtmPerfIntervalMissingPkts OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of missing packets (as detected via control
+       word sequence number gaps)."
+  ::= { pwAtmPerfIntervalEntry 4 }
+
+pwAtmPerfIntervalPktsReOrder OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of sequence (via control
+       word sequence number), but successfully re-ordered.
+       Note: some implementations may not support this
+       feature."
+  ::= { pwAtmPerfIntervalEntry 5 }
+
+ pwAtmPerfIntervalPktsMisOrder OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of order (via control word
+       sequence numbers)."
+  ::= { pwAtmPerfIntervalEntry 6 }
+
+pwAtmPerfIntervalPktsTimeout OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets transmitted due to timeout expiration."
+   ::= { pwAtmPerfIntervalEntry 7 }
+
+pwAtmPerfIntervalCellsXmit OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of transmitted cells."
+   ::= { pwAtmPerfIntervalEntry 8 }
+
+pwAtmPerfIntervalCellsDropped OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of dropped cells."
+   ::= { pwAtmPerfIntervalEntry 9 }
+
+pwAtmPerfIntervalCellsReceived OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of received cells."
+   ::= { pwAtmPerfIntervalEntry 10 }
+
+pwAtmPerfIntervalUnknownCells OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of cells received from the PSN with unknown VPI or
+      VCI values.  This object is relevant only in N:1 mode."
+   ::= { pwAtmPerfIntervalEntry 11 }
+
+-- End ATM PW Performance Interval Table
+
+-- ATM PW 1day Performance Table
+
+pwAtmPerf1DayIntervalTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwAtmPerf1DayIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "This table provides performance information per ATM PW
+       similar to the pwAtmPerfIntervalTable above.  However,
+       these counters represent historical one-day intervals up to
+       one full month."
+  ::= { pwAtmObjects 10 }
+
+pwAtmPerf1DayIntervalEntry OBJECT-TYPE
+  SYNTAX        PwAtmPerf1DayIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "An entry is created in this table by the agent
+       for every entry in the pwAtmCfgTable table."
+  INDEX  { pwIndex,pwAtmPerf1DayIntervalNumber }
+     ::= { pwAtmPerf1DayIntervalTable 1 }
+
+PwAtmPerf1DayIntervalEntry ::= SEQUENCE {
+
+     pwAtmPerf1DayIntervalNumber          Unsigned32,
+     pwAtmPerf1DayIntervalValidData       TruthValue,
+     pwAtmPerf1DayIntervalDuration        Unsigned32,
+     pwAtmPerf1DayIntervalMissingPkts     Counter32,
+     pwAtmPerf1DayIntervalPktsReOrder     Counter32,
+     pwAtmPerf1DayIntervalPktsMisOrder    Counter32,
+     pwAtmPerf1DayIntervalPktsTimeout     Counter32,
+     pwAtmPerf1DayIntervalCellsXmit       Counter32,
+     pwAtmPerf1DayIntervalCellsDropped    Counter32,
+     pwAtmPerf1DayIntervalCellsReceived   Counter32,
+     pwAtmPerf1DayIntervalUnknownCells    Counter32
+     }
+
+pwAtmPerf1DayIntervalNumber OBJECT-TYPE
+  SYNTAX        Unsigned32 (1..365)
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "The number of intervals, where 1 indicates current day
+       measured period and 2 and above indicate previous days,
+       respectively."
+  ::= { pwAtmPerf1DayIntervalEntry 1 }
+
+pwAtmPerf1DayIntervalValidData OBJECT-TYPE
+  SYNTAX        TruthValue
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "This object indicates if the data for this interval
+       is valid."
+  ::= { pwAtmPerf1DayIntervalEntry 2 }
+
+pwAtmPerf1DayIntervalDuration OBJECT-TYPE
+  SYNTAX      Unsigned32
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+    "The duration of a particular interval in seconds.
+     Adjustments in the system's time-of-day clock may
+     cause the interval to be greater or less than the
+     normal value.  Therefore, this actual interval value
+     is provided."
+  ::= { pwAtmPerf1DayIntervalEntry 3 }
+
+pwAtmPerf1DayIntervalMissingPkts OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+    "Number of missing packets (as detected via control word
+     sequence number gaps)."
+  ::= { pwAtmPerf1DayIntervalEntry 4 }
+
+pwAtmPerf1DayIntervalPktsReOrder OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of sequence (via control
+       word sequence number), but successfully re-ordered.
+       Note: some implementations may not support this
+       feature."
+  ::= { pwAtmPerf1DayIntervalEntry 5 }
+
+pwAtmPerf1DayIntervalPktsMisOrder OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of order (via control word
+       sequence numbers) and that could not be re-ordered."
+  ::= { pwAtmPerf1DayIntervalEntry 6 }
+
+pwAtmPerf1DayIntervalPktsTimeout OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets transmitted due to timeout expiration."
+   ::= { pwAtmPerf1DayIntervalEntry 7 }
+
+pwAtmPerf1DayIntervalCellsXmit OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of transmitted cells."
+   ::= { pwAtmPerf1DayIntervalEntry 8 }
+
+pwAtmPerf1DayIntervalCellsDropped OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of dropped cells."
+   ::= { pwAtmPerf1DayIntervalEntry 9 }
+
+pwAtmPerf1DayIntervalCellsReceived OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of received cells."
+   ::= { pwAtmPerf1DayIntervalEntry 10 }
+
+pwAtmPerf1DayIntervalUnknownCells OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of cells received from the PSN with unknown VPI
+      or VCI values.  This object is relevant only in N:1 mode."
+   ::= { pwAtmPerf1DayIntervalEntry 11 }
+
+-- End of ATM PW Performance table
+
+    pwAtmCompliances OBJECT IDENTIFIER ::= { pwAtmConformance 1 }
+    pwAtmGroups      OBJECT IDENTIFIER ::= { pwAtmConformance 2 }
+    pwAtmCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that support
+             ATM PW."
+    MODULE  -- this module
+        MANDATORY-GROUPS { pwAtmCfgGroup,
+                           pwAtmPerfGroup
+                         }
+
+       OBJECT pwAtmCfgFarEndMaxCellConcatenation
+       MIN-ACCESS read-only
+       DESCRIPTION
+        "The ability to set this object
+        is not required."
+
+       GROUP        pwAtmOutbound1to1Group
+       DESCRIPTION "This group is mandatory only for implementations
+                    that support the ATM PW 1:1 mode and not using
+                    the Nto1 table."
+
+       GROUP        pwAtmInbound1to1Group
+       DESCRIPTION "This group is mandatory only for implementations
+                    that support the ATM PW 1:1 mode and not using
+                    the Nto1 table."
+
+       GROUP        pwAtmOutboundNto1Group
+       DESCRIPTION "This group is mandatory only for implementations
+                    that support the ATM PW N:1 and transparent mode."
+
+       GROUP        pwAtmInboundNto1Group
+       DESCRIPTION "This group is mandatory only for implementations
+                    that support the ATM PW N:1 and transparent mode."
+    ::= { pwAtmCompliances 2 }
+
+-- Units of conformance.
+
+    pwAtmCfgGroup OBJECT-GROUP
+    OBJECTS {pwAtmCfgMaxCellConcatenation,
+             pwAtmCfgFarEndMaxCellConcatenation,
+             pwAtmCfgTimeoutMode,
+             pwAtmClpQosMapping
+                     }
+    STATUS  current
+    DESCRIPTION
+              "Collection of objects for basic ATM PW
+               configuration."
+    ::= { pwAtmGroups 5 }
+
+    pwAtmPerfGroup OBJECT-GROUP
+    OBJECTS {pwAtmPerfCurrentMissingPkts,
+             pwAtmPerfCurrentPktsReOrder,
+             pwAtmPerfCurrentPktsMisOrder,
+             pwAtmPerfCurrentPktsTimeout,
+             pwAtmPerfCurrentCellsXmit,
+             pwAtmPerfCurrentCellsDropped,
+             pwAtmPerfCurrentCellsReceived,
+             pwAtmPerfCurrentUnknownCells,
+             pwAtmPerfIntervalValidData,
+             pwAtmPerfIntervalDuration,
+             pwAtmPerfIntervalMissingPkts,
+             pwAtmPerfIntervalPktsReOrder,
+             pwAtmPerfIntervalPktsMisOrder,
+             pwAtmPerfIntervalPktsTimeout,
+             pwAtmPerfIntervalCellsXmit,
+             pwAtmPerfIntervalCellsDropped,
+             pwAtmPerfIntervalCellsReceived,
+             pwAtmPerfIntervalUnknownCells,
+             pwAtmPerf1DayIntervalValidData,
+             pwAtmPerf1DayIntervalDuration,
+             pwAtmPerf1DayIntervalMissingPkts,
+             pwAtmPerf1DayIntervalPktsReOrder,
+             pwAtmPerf1DayIntervalPktsMisOrder,
+             pwAtmPerf1DayIntervalPktsTimeout,
+             pwAtmPerf1DayIntervalCellsXmit,
+             pwAtmPerf1DayIntervalCellsDropped,
+             pwAtmPerf1DayIntervalCellsReceived,
+             pwAtmPerf1DayIntervalUnknownCells
+                         }
+    STATUS current
+    DESCRIPTION
+              "Collection of objects for basic ATM PW Performance."
+    ::= { pwAtmGroups 6 }
+
+    pwAtmOutbound1to1Group OBJECT-GROUP
+    OBJECTS {pwAtmOutboundAtmIf,
+             pwAtmOutboundVpi,
+             pwAtmOutboundVci,
+             pwAtmOutboundTrafficParamDescr,
+             pwAtmOutboundRowStatus
+             }
+    STATUS  current
+    DESCRIPTION
+              "Collection of objects for basic 1:1 ATM PW outbound
+               configuration."
+    ::= { pwAtmGroups 7 }
+
+    pwAtmInbound1to1Group OBJECT-GROUP
+    OBJECTS {pwAtmInboundAtmIf,
+             pwAtmInboundVpi,
+             pwAtmInboundVci,
+             pwAtmInboundTrafficParamDescr,
+             pwAtmInboundRowStatus
+             }
+    STATUS  current
+    DESCRIPTION
+          "Collection of objects for basic 1:1 ATM PW inbound
+           configuration."
+    ::= { pwAtmGroups 8 }
+
+    pwAtmOutboundNto1Group OBJECT-GROUP
+    OBJECTS {pwAtmOutboundNto1RowStatus,
+             pwAtmOutboundNto1TrafficParamDescr,
+             pwAtmOutboundNto1MappedVpi,
+             pwAtmOutboundNto1MappedVci
+                         }
+    STATUS  current
+    DESCRIPTION
+          "Collection of objects for N:1, 1:1, or transparent
+          ATM PW outbound configuration."
+    ::= { pwAtmGroups 9 }
+
+    pwAtmInboundNto1Group OBJECT-GROUP
+    OBJECTS {pwAtmInboundNto1RowStatus,
+             pwAtmInboundNto1TrafficParamDescr,
+             pwAtmInboundNto1MappedVpi,
+             pwAtmInboundNto1MappedVci
+                 }
+    STATUS current
+    DESCRIPTION
+          "Collection of objects for N:1, 1:1, or transparent
+           ATM PW inbound configuration."
+    ::= { pwAtmGroups 10 }
+
+END
diff --git a/snmp_builder/mibs/PW-ENET-STD-MIB.mib b/snmp_builder/mibs/PW-ENET-STD-MIB.mib
new file mode 100644
index 0000000..0ee48d4
--- /dev/null
+++ b/snmp_builder/mibs/PW-ENET-STD-MIB.mib
@@ -0,0 +1,491 @@
+PW-ENET-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, mib-2
+       FROM SNMPv2-SMI                    -- [RFC2578]
+
+   MODULE-COMPLIANCE, OBJECT-GROUP
+       FROM SNMPv2-CONF                   -- [RFC2580]
+
+   StorageType, RowStatus
+       FROM SNMPv2-TC                     -- [RFC2579]
+
+   InterfaceIndexOrZero
+       FROM IF-MIB                        -- [RFC2863]
+
+   ZeroBasedCounter32
+       FROM RMON2-MIB                     -- [RFC4502]
+
+   pwIndex
+       FROM PW-STD-MIB                    -- [RFC5601]
+
+   VlanIdOrAnyOrNone
+       FROM Q-BRIDGE-MIB;                 -- [RFC4363]
+
+pwEnetStdMIB MODULE-IDENTITY
+    LAST-UPDATED "200906150000Z"  -- 15 June 2009 00:00:00 GMT
+
+    ORGANIZATION "Pseudowire Edge-to-Edge Emulation (PWE3) Working
+                 Group"
+
+    CONTACT-INFO
+         "David Zelig
+          Email: davidz@oversi.com
+
+          Thomas D. Nadeau
+          Email:  tom.nadeau@bt.com
+         "
+    DESCRIPTION
+        "This MIB module describes a model for managing Ethernet
+         point-to-point pseudowire services over a Packet
+         Switched Network (PSN).
+
+         Copyright (c) 2009 IETF Trust and the persons identified
+         as authors of the code.  All rights reserved.
+
+         Redistribution and use in source and binary forms, with or
+         without modification, are permitted provided that the following
+         conditions are met:
+
+         - Redistributions of source code must retain the above
+           copyright notice, this list of conditions and the following
+           disclaimer.
+
+         - Redistributions in binary form must reproduce the above
+           copyright notice, this list of conditions and the following
+           disclaimer in the documentation and/or other materials
+           provided with the distribution.
+
+         - Neither the name of Internet Society, IETF or IETF Trust, nor
+           the names of specific contributors, may be used to endorse or
+           promote products derived from this software without specific
+           prior written permission.
+
+         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+         CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+         INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+         MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+         DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+         CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+         SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+         NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+         LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+         HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+         CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+         OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+         EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+         This version of this MIB module is part of RFC 5603;
+
+         see the RFC itself for full legal notices."
+
+   -- Revision history
+   REVISION "200906150000Z"  -- 15 June 2009 00:00:00 GMT
+   DESCRIPTION "Initial version published as part of RFC 5603."
+      ::= { mib-2 180 }
+
+pwEnetObjects        OBJECT IDENTIFIER ::= { pwEnetStdMIB 1 }
+pwEnetConformance    OBJECT IDENTIFIER ::= { pwEnetStdMIB 2 }
+
+--
+-- Ethernet PW table
+--
+
+pwEnetTable  OBJECT-TYPE
+    SYNTAX SEQUENCE OF PwEnetEntry
+    MAX-ACCESS  not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table contains the index to the Ethernet tables
+        associated with this Ethernet PW, the VLAN configuration,
+        and the VLAN mode."
+    ::= { pwEnetObjects 1 }
+
+pwEnetEntry  OBJECT-TYPE
+    SYNTAX     PwEnetEntry
+    MAX-ACCESS  not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table is indexed by the same index that was created
+        for the associated entry in the PW generic table in the
+
+        PW-STD-MIB module.
+        The pwIndex and the pwEnetPwInstance are used as indexes
+        to allow multiple VLANs to exist on the same PW.
+
+        An entry is created in this table by the agent for every
+        entry in the pwTable with a pwType of 'ethernetTagged'
+        or 'ethernet'.  Additional rows may be created by the
+        operator or the agent if multiple entries are required for
+        the same PW.
+
+        The value of pwEnetPwInstance can be arbitrarily selected
+        to make the row unique; however, implementations that know
+        the VLAN field value when the row is created MAY use the
+        value of the VLAN itself for better readability and
+        backward compatibility with older versions of this MIB
+
+        module.
+
+        This table provides Ethernet port mapping and VLAN
+        configuration for each Ethernet PW.
+
+        All read-create objects in this table MAY be changed at any
+        time; however, change of some objects (for example,
+        pwEnetVlanMode) during the PW forwarding state MAY cause traffic
+        disruption.
+
+        Manual entries in this table SHOULD be preserved after a
+        reboot, and the agent MUST ensure the integrity of those
+        entries.  If the set of entries of a specific row is found to
+        be inconsistent after reboot, the PW pwOperStatus MUST be
+        declared as notPresent(5).
+        "
+    INDEX { pwIndex, pwEnetPwInstance }
+    ::= { pwEnetTable 1 }
+
+PwEnetEntry ::= SEQUENCE {
+       pwEnetPwInstance    Unsigned32,
+       pwEnetPwVlan        VlanIdOrAnyOrNone,
+       pwEnetVlanMode      INTEGER,
+       pwEnetPortVlan      VlanIdOrAnyOrNone,
+       pwEnetPortIfIndex   InterfaceIndexOrZero,
+       pwEnetPwIfIndex     InterfaceIndexOrZero,
+       pwEnetRowStatus     RowStatus,
+       pwEnetStorageType   StorageType
+   }
+
+pwEnetPwInstance  OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "If multiple rows are mapped to the same PW, this index is
+         used to uniquely identify the individual row.
+         If the value of the VLAN field is known at the time of
+         row creation, the value of pwEnetPwVlan MAY be used
+         for better readability and backward compatibility with
+         older versions of this MIB module.  Otherwise, the value
+         1 SHOULD be set to the first row for each pwIndex
+         for better readability and in order that the management
+         application will know in advance how to access the
+         first row when it was created by the agent.
+        "
+    ::= { pwEnetEntry 1 }
+
+pwEnetPwVlan  OBJECT-TYPE
+    SYNTAX      VlanIdOrAnyOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object defines the (service-delimiting) VLAN field
+        value on the PW.  The value 4095 MUST be used if the
+        object is not applicable, for example, when mapping all
+        packets from an Ethernet port to this PW (raw mode).
+        The value 0 MUST be set to indicate untagged frames
+        (from the PW point of view), i.e., when pwEnetVlanMode
+        equals 'noChange' and pwEnetPortVlan equals 0."
+    ::= { pwEnetEntry 2 }
+
+pwEnetVlanMode  OBJECT-TYPE
+    SYNTAX     INTEGER {
+             other(0),
+             portBased(1),
+             noChange(2),
+             changeVlan(3),
+             addVlan(4),
+             removeVlan(5)
+    }
+    MAX-ACCESS  read-create
+    STATUS     current
+    DESCRIPTION
+        "This object indicates the mode of VLAN handling between the
+         port or the virtual port associated with the PW and the
+         PW encapsulation.
+
+       - 'other' indicates an operation that is not defined by
+          this MIB module.
+
+        - 'portBased' indicates that the forwarder will forward
+          packets between the port and the PW independent of their
+          structure (i.e., there are no service-delimiting VLAN tags
+          from the PE standpoint).
+
+        - 'noChange' indicates that the PW contains the original
+           user VLAN, as specified in pwEnetPortVlan; i.e., the
+           VLAN on the PE-CE link is the service-delimiting tag
+           and is kept 'as is' on the PW.
+
+        - 'changeVlan' indicates that the VLAN field on the PW
+          may be different than the VLAN field on the user's
+
+          port.  The VLAN on the PE-CE link is the service-delimiting
+          tag but has a different value on the PW.
+
+        - 'addVlan' indicates that a VLAN field will be added
+          on the PSN-bound direction (i.e., on the PW). pwEnetPwVlan
+          indicates the value that will be added.
+
+        - 'removeVlan' indicates that the encapsulation on the
+          PW does not include the service-delimiting VLAN field.
+          Note that PRI bits transparency is lost in this case.
+
+        - Implementation of 'portsbased', 'removeVlan', 'addVlan'
+          'other', and 'changeVlan' is OPTIONAL.
+        "
+    DEFVAL { noChange }
+    ::= { pwEnetEntry 3 }
+
+pwEnetPortVlan  OBJECT-TYPE
+    SYNTAX     VlanIdOrAnyOrNone
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object defines if the mapping between the original port
+        (physical port or VPLS virtual port) to the PW is VLAN based
+        or not.  In case of VLAN mapping, this object indicates the
+        VLAN value on the original port.
+
+        The value of '4095' MUST be used if the whole original port
+        traffic is mapped to the same PW.  Note that a pwType of
+        'ethernetTagged' can still be used if service-delimiting tag
+        is added on the PW (pwEnetVlanMode equals 'addVlan').
+
+        This object MUST be equal to pwEnetPwVlan if pwEnetVlanMode
+        equals 'noChange'.
+
+        The value 0 indicates that packets without a VLAN field
+        (i.e., untagged frames) on the port are associated to this
+        PW.  This allows the same behavior as assigning 'Default
+        VLAN' to untagged frames.
+        "
+    DEFVAL  { 4095 }
+    ::= { pwEnetEntry 4 }
+
+pwEnetPortIfIndex  OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to specify the ifIndex of the Ethernet
+         port associated with this PW for point-to-point Ethernet
+         service, or the ifIndex of the virtual interface of the
+         VPLS instance associated with the PW if the service is
+         VPLS.  Two rows in this table can point to the same ifIndex
+         only if there is no overlap of VLAN values specified in
+         pwEnetPortVlan that are associated with this port.
+
+         A value of zero indicates that association to an ifIndex is
+         not yet known."
+    ::= { pwEnetEntry 5 }
+
+pwEnetPwIfIndex  OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "If the PW is modeled as an ifIndex in the ifTable, this
+         object indicates the value of the ifIndex representing the
+         Ethernet PW on the PSN side in the Etherlike-MIB.  Note that
+         this value may be different from the value of pwIfIndex
+         that represents the ifIndex of the PW for ifType 'pw'."
+     DEFVAL { 0 }
+    ::= { pwEnetEntry 6 }
+
+pwEnetRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object enables creating, deleting, and modifying this
+         row."
+   ::= { pwEnetEntry 7 }
+
+pwEnetStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the storage type of this row."
+    DEFVAL { nonVolatile }
+    ::= { pwEnetEntry 8 }
+
+--
+-- Ethernet PW Statistics Table
+--
+
+pwEnetStatsTable  OBJECT-TYPE
+    SYNTAX SEQUENCE OF PwEnetStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains statistical counters specific for
+         Ethernet PW."
+    ::= { pwEnetObjects 2 }
+
+pwEnetStatsEntry  OBJECT-TYPE
+    SYNTAX      PwEnetStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each entry represents the statistics gathered for the
+         PW carrying the Ethernet."
+    INDEX { pwIndex }
+    ::= { pwEnetStatsTable 1 }
+
+PwEnetStatsEntry ::= SEQUENCE {
+    pwEnetStatsIllegalVlan        ZeroBasedCounter32,
+    pwEnetStatsIllegalLength      ZeroBasedCounter32
+}
+
+pwEnetStatsIllegalVlan  OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets received (from the PSN) on this PW
+         with either an illegal VLAN field, a missing VLAN field
+         when one was expected, or an excessive VLAN field when
+         it was not expected.  This counter may not be applicable
+         in some cases, and MUST return the value of zero in
+         such a case."
+    ::= { pwEnetStatsEntry 1 }
+
+pwEnetStatsIllegalLength  OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets that were received with an illegal
+         Ethernet packet length on this PW.  An illegal length is
+         defined as being greater than the value in the advertised
+         MTU supported, or shorter than the allowed Ethernet packet
+         size."
+    ::= { pwEnetStatsEntry 2 }
+
+---
+--- Conformance description
+---
+
+pwEnetGroups      OBJECT IDENTIFIER ::= { pwEnetConformance 1 }
+pwEnetCompliances OBJECT IDENTIFIER ::= { pwEnetConformance 2 }
+
+-- Compliance requirement for fully compliant implementations
+
+pwEnetModuleFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that provides full
+             support for the PW-ENET-STD-MIB module.  Such devices
+             can then be monitored and also be configured using
+             this MIB module."
+    MODULE  -- this module
+      MANDATORY-GROUPS {
+                         pwEnetGroup,
+                         pwEnetStatsGroup
+                        }
+
+   OBJECT       pwEnetVlanMode
+   DESCRIPTION "An implementation MUST support at least the value
+                noChange(2)."
+
+   OBJECT       pwEnetPwIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access and values other than zero are
+                required only for implementations that support
+                modeling the Ethernet PW in the Etherlike-MIB."
+   OBJECT       pwEnetRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2),
+                            notReady(3) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Support for createAndWait is not required.  Support
+                of notReady is not required for implementations that
+                do not support signaling.
+                Support of read-write is not required for
+                implementations that do not support more than one
+                VLAN mapping to the same PW."
+    ::= { pwEnetCompliances 1 }
+
+-- Compliance requirement for read-only compliant implementations
+
+pwEnetModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that provide read-
+             only support for the PW-ENET-STD-MIB module.  Such
+             devices can then be monitored but cannot be configured
+             using this MIB module."
+
+    MODULE  -- this module
+      MANDATORY-GROUPS { pwEnetGroup,
+                         pwEnetStatsGroup
+                         }
+
+   OBJECT       pwEnetPwVlan
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwEnetVlanMode
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  An implementation
+                MUST support at least the value noChange(2)."
+
+   OBJECT       pwEnetPortVlan
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwEnetPortIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwEnetPwIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  Values other than
+                zero are required only for implementations that
+                support modeling the Ethernet PW in the
+                Etherlike-MIB."
+
+   OBJECT       pwEnetRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2),
+                            notReady(3) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  Support
+                of notReady is not required for implementations that
+                do not support signaling."
+
+   OBJECT       pwEnetStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+    ::= { pwEnetCompliances 2 }
+
+-- Units of conformance
+
+pwEnetGroup OBJECT-GROUP
+   OBJECTS {
+            pwEnetPwVlan,
+            pwEnetVlanMode,
+            pwEnetPortVlan,
+            pwEnetPortIfIndex,
+            pwEnetPwIfIndex,
+            pwEnetRowStatus,
+            pwEnetStorageType
+   }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects for basic Ethernet PW configuration."
+   ::= { pwEnetGroups 1 }
+
+pwEnetStatsGroup OBJECT-GROUP
+   OBJECTS {
+            pwEnetStatsIllegalVlan,
+            pwEnetStatsIllegalLength
+   }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects counting various PW level errors."
+   ::= { pwEnetGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/PW-MPLS-STD-MIB.mib b/snmp_builder/mibs/PW-MPLS-STD-MIB.mib
new file mode 100644
index 0000000..9a13c2d
--- /dev/null
+++ b/snmp_builder/mibs/PW-MPLS-STD-MIB.mib
@@ -0,0 +1,914 @@
+PW-MPLS-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, mib-2
+      FROM SNMPv2-SMI                   -- [RFC2578]
+
+   MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF                  -- [RFC2580]
+
+   StorageType
+      FROM SNMPv2-TC                    -- [RFC2579]
+
+   InterfaceIndexOrZero
+      FROM IF-MIB                       -- [RFC2863]
+
+   MplsTunnelIndex, MplsTunnelInstanceIndex,
+   MplsLdpIdentifier, MplsLsrIdentifier
+      FROM MPLS-TC-STD-MIB              -- [RFC3811]
+
+   MplsIndexType
+      FROM MPLS-LSR-STD-MIB             -- [RFC3813]
+
+   PwIndexType
+      FROM PW-TC-STD-MIB                -- [RFC5542]
+
+   pwIndex                              -- [RFC5601]
+      FROM PW-STD-MIB
+;
+
+pwMplsStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200906120000Z"  --  12 June 2009 00:00:00 GMT
+   ORGANIZATION "Pseudowire Emulation Edge-to-Edge (PWE3) Working
+                 Group."
+   CONTACT-INFO
+       "
+        David Zelig, Editor
+        Email: davidz@corrigent.com
+
+        Thomas D. Nadeau, Editor
+        Email:  tom.nadeau@bt.com
+
+        The PWE3 Working Group (email distribution pwe3@ietf.org,
+        http://www.ietf.org/html.charters/pwe3-charter.html)
+       "
+   DESCRIPTION
+       "This MIB module complements the PW-STD-MIB module for PW
+        operation over MPLS.
+
+        Copyright (c) 2009 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, are permitted provided that the
+        following conditions are met:
+
+        - Redistributions of source code must retain the above
+          copyright notice, this list of conditions and the
+          following disclaimer.
+
+        - Redistributions in binary form must reproduce the above
+          copyright notice, this list of conditions and the following
+          disclaimer in the documentation and/or other materials
+          provided with the distribution.
+
+        - Neither the name of Internet Society, IETF or IETF Trust,
+          nor the names of specific contributors, may be used to
+          endorse or promote products derived from this software
+          without specific prior written permission.
+
+        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+        CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+        INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+        MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+
+        DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+        CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+        SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+        NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+        LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+        HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+        CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+        OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+        SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+        This version of this MIB module is part of RFC 5602;
+        see the RFC itself for full legal notices.
+       "
+
+   -- Revision history.
+    REVISION "200906120000Z"  -- 12 June 2009 00:00:00 GMT
+    DESCRIPTION
+        "First published as RFC 5602. "
+  ::= { mib-2 181 }
+
+-- Top-level components of this MIB.
+
+ -- Notifications
+ pwMplsNotifications OBJECT IDENTIFIER
+                               ::= { pwMplsStdMIB 0 }
+
+-- Tables, Scalars
+pwMplsObjects       OBJECT IDENTIFIER
+                              ::= { pwMplsStdMIB 1 }
+-- Conformance
+pwMplsConformance   OBJECT IDENTIFIER
+                              ::= { pwMplsStdMIB 2 }
+
+-- PW MPLS table
+
+pwMplsTable   OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwMplsEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table controls MPLS-specific parameters when the PW is
+        going to be carried over MPLS PSN."
+   ::= { pwMplsObjects 1 }
+
+pwMplsEntry   OBJECT-TYPE
+   SYNTAX        PwMplsEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "A row in this table represents parameters specific to MPLS
+         PSN for a pseudowire (PW).  The row is created
+         automatically by the local agent if the pwPsnType is
+         mpls(1).  It is indexed by pwIndex, which uniquely
+         identifies a singular PW.
+         Manual entries in this table SHOULD be preserved after a
+         reboot, and the agent MUST ensure the integrity of those
+         entries.
+         If the set of entries of a specific row were found to be
+         nonconsistent after reboot, the PW pwOperStatus MUST be
+         declared as down(2).
+         Any read-write object in this table MAY be changed at any
+         time; however, change of some objects (for example,
+         pwMplsMplsType) during PW forwarding state MAY cause traffic
+         disruption."
+   INDEX  { pwIndex }
+      ::= { pwMplsTable 1 }
+
+PwMplsEntry ::= SEQUENCE {
+      pwMplsMplsType             BITS,
+      pwMplsExpBitsMode          INTEGER,
+      pwMplsExpBits              Unsigned32,
+      pwMplsTtl                  Unsigned32,
+      pwMplsLocalLdpID           MplsLdpIdentifier,
+      pwMplsLocalLdpEntityIndex  Unsigned32,
+      pwMplsPeerLdpID            MplsLdpIdentifier,
+      pwMplsStorageType          StorageType
+   }
+
+pwMplsMplsType OBJECT-TYPE
+   SYNTAX   BITS {
+       mplsTe    (0),
+       mplsNonTe (1),
+       pwOnly    (2)
+            }
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "This object is set by the operator to indicate the outer
+         tunnel types, if existing.  mplsTe(0) is used if the outer
+         tunnel is set up by MPLS-TE, and mplsNonTe(1) is used if the
+         outer tunnel is set up by LDP or manually.  A combination of
+         mplsTe(0) and mplsNonTe(1) MAY exist.
+         pwOnly(2) is used if there is no outer tunnel label, i.e.,
+         in static provisioning without an MPLS tunnel.  pwOnly(2)
+         cannot be combined with mplsNonTe(1) or mplsTe(0).
+         An implementation that can identify automatically that the
+         peer node is directly connected MAY support the bit
+         pwOnly(2) as read-only.
+        "
+   DEFVAL { { mplsNonTe } }
+   ::= { pwMplsEntry 1 }
+
+pwMplsExpBitsMode OBJECT-TYPE
+   SYNTAX   INTEGER {
+       outerTunnel      (1),
+       specifiedValue   (2),
+       serviceDependant (3)
+            }
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object is set by the operator to determine the PW shim
+        label EXP bits.  The value of outerTunnel(1) is used where
+        there is an outer tunnel -- pwMplsMplsType equals to
+        mplsTe(0) or mplsNonTe(1).  Note that in this case, there
+        is no need to mark the PW label with the EXP bits, since the
+        PW label is not visible to the intermediate nodes.
+        If there is no outer tunnel, specifiedValue(2) SHOULD be used
+        to indicate that the value is specified by pwMplsExpBits.
+        Setting serviceDependant(3) indicates that the EXP bits are
+        set based on a rule that is implementation specific."
+   DEFVAL { outerTunnel }
+   ::= { pwMplsEntry 2 }
+
+pwMplsExpBits OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..7)
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "This object is set by the operator if pwMplsExpBitsMode is
+         set to specifiedValue(2) to indicate the MPLS EXP bits to
+         be used on the PW shim label.  Otherwise, it SHOULD be set
+         to zero."
+   DEFVAL { 0 }
+   ::= { pwMplsEntry 3 }
+
+pwMplsTtl OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..255)
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "This object is set by the operator to indicate the PW TTL
+         value to be used on the PW shim label."
+   DEFVAL { 2 }
+   ::= { pwMplsEntry 4 }
+
+pwMplsLocalLdpID OBJECT-TYPE
+   SYNTAX        MplsLdpIdentifier
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "The LDP identifier of the LDP entity that creates
+         this PW in the local node.  As the PW labels are always
+         set from the per-platform label space, the last two octets
+         in the LDP ID MUST always both be zeros."
+   REFERENCE
+        "'LDP specifications', RFC 3036, section 2.2.2."
+   ::= { pwMplsEntry 5 }
+
+pwMplsLocalLdpEntityIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..4294967295)
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "The local node LDP Entity Index of the LDP entity creating
+         this PW."
+   ::= { pwMplsEntry 6 }
+
+pwMplsPeerLdpID OBJECT-TYPE
+   SYNTAX        MplsLdpIdentifier
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The peer LDP identifier of the LDP session.  This object
+         SHOULD return the value zero if LDP is not used or if the
+         value is not yet known."
+   ::= { pwMplsEntry 7 }
+
+pwMplsStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this row."
+   DEFVAL { nonVolatile }
+   ::= { pwMplsEntry 8 }
+
+-- End of PW MPLS Table
+
+-- Pseudowire MPLS Outbound Tunnel Table
+
+pwMplsOutboundTable   OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwMplsOutboundEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table reports and configures the current outbound MPLS
+        tunnels (i.e., toward the PSN) or the physical interface in
+        the case of a PW label only that carries the PW traffic.  It
+        also reports the current outer tunnel and LSP that forward
+        the PW traffic."
+   ::= { pwMplsObjects 2 }
+
+pwMplsOutboundEntry OBJECT-TYPE
+   SYNTAX        PwMplsOutboundEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "A row in this table configures the outer tunnel used for
+        carrying the PW traffic toward the PSN.
+        In the case of PW label only, it configures the interface
+        that will carry the PW traffic.
+
+        An entry in this table augments the pwMplsEntry, and is
+        created automatically when the corresponding row has been
+        created by the agent in the pwMplsEntry.
+
+        This table points to the appropriate MPLS MIB module:
+
+        In the MPLS-TE case, the three objects relevant to the
+        indexing of a TE tunnel head-end (as used in the
+        MPLS-TE-STD-MIB) are to be configured, and the tunnel
+        instance indicates the LSP that is currently in use for
+        forwarding the traffic.
+
+        In the case of signaled non-TE MPLS (an outer tunnel label
+        assigned by LDP), the table points to the XC entry in the
+        LSR-STD-MIB.  If the non-TE MPLS tunnel is manually
+        configured, the operator configures the XC pointer to this
+        tunnel.
+
+        In the case of PW label only (no outer tunnel), the ifIndex
+        of the port to carry the PW is configured here.
+
+        It is possible to associate a PW to one TE tunnel head-end
+        and a non-TE tunnel together.  An indication in this table
+        will report the currently active one.  In addition, in the
+        TE case, the table reports the active tunnel instance
+        (i.e., the specific LSP in use).
+        Any read-write object in this table MAY be changed at any
+        time; however, change of some objects (for example,
+        MPLS-TE indexes) during PW forwarding state MAY cause traffic
+        disruption."
+   AUGMENTS { pwMplsEntry }
+      ::= { pwMplsOutboundTable 1 }
+
+PwMplsOutboundEntry ::= SEQUENCE {
+      pwMplsOutboundLsrXcIndex           MplsIndexType,
+      pwMplsOutboundTunnelIndex          MplsTunnelIndex,
+      pwMplsOutboundTunnelInstance       MplsTunnelInstanceIndex,
+      pwMplsOutboundTunnelLclLSR         MplsLsrIdentifier,
+      pwMplsOutboundTunnelPeerLSR        MplsLsrIdentifier,
+      pwMplsOutboundIfIndex              InterfaceIndexOrZero,
+      pwMplsOutboundTunnelTypeInUse      INTEGER
+      }
+
+pwMplsOutboundLsrXcIndex      OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object is applicable if the pwMplsMplsType mplsNonTe(1)
+        bit is set, and MUST return a value of zero otherwise.
+        If the outer tunnel is signaled, the object is read-only
+        and indicates the XC index in the MPLS-LSR-STD-MIB of the
+        outer tunnel toward the peer.  Otherwise (tunnel is set up
+        manually), the operator defines the XC index of the manually
+        created outer tunnel through this object.
+       "
+   ::= { pwMplsOutboundEntry 1 }
+
+pwMplsOutboundTunnelIndex         OBJECT-TYPE
+   SYNTAX        MplsTunnelIndex
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object is applicable if the pwMplsMplsType mplsTe(0)
+        bit is set, and MUST return a value of zero otherwise.
+        It is part of the set of indexes for the outbound tunnel.
+
+        The operator sets this object to represent the desired
+        tunnel head-end toward the peer for carrying the PW
+        traffic.
+       "
+   ::= { pwMplsOutboundEntry  2 }
+
+pwMplsOutboundTunnelInstance      OBJECT-TYPE
+   SYNTAX        MplsTunnelInstanceIndex
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object is applicable if the pwMplsMplsType mplsTe(0)
+        bit is set, and MUST return a value of zero otherwise.
+        It indicates the actual tunnel instance that is currently
+        active and carrying the PW traffic.  It SHOULD return the
+        value zero if the information from the MPLS-TE
+        application is not yet known.
+       "
+   ::= { pwMplsOutboundEntry   3 }
+
+pwMplsOutboundTunnelLclLSR        OBJECT-TYPE
+   SYNTAX        MplsLsrIdentifier
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object is applicable if the pwMplsMplsType mplsTe(0)
+        bit is set, and MUST return a value of all zeros otherwise.
+        It is part of the set of indexes for the outbound tunnel.
+        The operator sets this object to represent the desired
+        tunnel head-end toward the peer for carrying the PW
+        traffic.
+       "
+   ::= { pwMplsOutboundEntry   4 }
+
+pwMplsOutboundTunnelPeerLSR       OBJECT-TYPE
+   SYNTAX        MplsLsrIdentifier
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "This object is applicable if the pwMplsMplsType mplsTe(0)
+        bit is set, and MUST return a value of zero otherwise.
+        It is part of the set of indexes for the outbound tunnel.
+        Note that in most cases, it equals to pwPeerAddr.
+       "
+   ::= { pwMplsOutboundEntry   5 }
+
+pwMplsOutboundIfIndex       OBJECT-TYPE
+   SYNTAX         InterfaceIndexOrZero
+   MAX-ACCESS     read-write
+   STATUS         current
+   DESCRIPTION
+       "This object is applicable if the pwMplsMplsType pwOnly(0)
+        bit is set, and MUST return a value of zero otherwise.
+        The operator configures the ifIndex of the outbound port
+        in this case.
+       "
+   ::= { pwMplsOutboundEntry   6 }
+
+pwMplsOutboundTunnelTypeInUse OBJECT-TYPE
+   SYNTAX         INTEGER {
+                  notYetKnown (1),
+                  mplsTe      (2),
+                  mplsNonTe   (3),
+                  pwOnly      (4)
+   }
+   MAX-ACCESS     read-only
+   STATUS         current
+   DESCRIPTION
+       "This object indicates the current tunnel that is carrying
+        the PW traffic.
+        The value of notYetKnown(1) should be used if the agent is
+        currently unable to determine which tunnel or interface is
+        carrying the PW, for example, because both tunnels are in
+        operational status down.
+       "
+   ::= { pwMplsOutboundEntry   7 }
+
+-- End of PW MPLS Outbound Tunnel table
+
+-- PW MPLS inbound table
+
+pwMplsInboundTable OBJECT-TYPE
+   SYNTAX           SEQUENCE OF PwMplsInboundEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+       "This table indicates the PW LDP XC entry in the
+        MPLS-LSR-STD-MIB for signaled PWs.
+       "
+   ::= { pwMplsObjects 3 }
+
+pwMplsInboundEntry OBJECT-TYPE
+   SYNTAX           PwMplsInboundEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+        "A row in this table is created by the agent
+         for each signaled PW, and shows the XC index related to
+         the PW signaling in the inbound direction in the
+         MPLS-LSR-STD-MIB that controls and display the information
+         for all the LDP signaling processes in the local node.
+        "
+   INDEX  { pwIndex }
+      ::= { pwMplsInboundTable 1 }
+
+PwMplsInboundEntry ::= SEQUENCE {
+      pwMplsInboundXcIndex           MplsIndexType
+   }
+
+pwMplsInboundXcIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The XC index representing this PW in the inbound
+        direction.  It MUST return the value zero if the
+        information is not yet known."
+   ::= { pwMplsInboundEntry 1 }
+
+-- End of PW MPLS inbound table
+
+-- PW to Non-TE mapping Table.
+
+pwMplsNonTeMappingTable OBJECT-TYPE
+   SYNTAX           SEQUENCE OF PwMplsNonTeMappingEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+       "This table indicates the PW association to the outbound
+        tunnel in non-TE applications, maps the PW to its (inbound)
+        XC entry, and indicates the PW-to-physical interface mapping
+        for a PW without an outer tunnel.
+       "
+   ::= { pwMplsObjects 4 }
+
+pwMplsNonTeMappingEntry OBJECT-TYPE
+   SYNTAX           PwMplsNonTeMappingEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+        "A row in this table displays the association
+         between the PW and
+         - its non-TE MPLS outbound outer tunnel,
+         - its XC entry in the MPLS-LSR-STD-MIB, or
+         - its physical interface if there is no outer tunnel
+           (PW label only) and manual configuration.
+
+         Rows are created in this table by the agent depending on
+         the setting of pwMplsMplsType:
+
+         - If the pwMplsMplsType mplsNonTe(1) bit is set, the agent
+         creates a row for the outbound direction
+         (pwMplsNonTeMappingDirection set to psnBound(1)).
+         The pwMplsNonTeMappingXcIndex holds the XC index in the
+         MPLS-LSR-STD-MIB of the PSN-bound outer tunnel.
+         pwMplsNonTeMappingIfIndex MUST be zero for this row.
+
+         - If the pwMplsMplsType pwOnly(2) bit is set, the agent
+         creates a row for the outbound direction
+         (pwMplsNonTeMappingDirection set to psnBound(1)).
+         The pwMplsNonTeMappingIfIndex holds the ifIndex of the
+         physical port this PW will use in the outbound direction.
+         pwMplsNonTeMappingXcIndex MUST be zero for this row.
+
+         - If the PW has been set up by a signaling protocol (i.e.,
+         pwOwner equal pwIdFecSignaling(2) or
+         genFecSignaling(3)), the agent creates a row for the
+         inbound direction (pwMplsNonTeMappingDirection set to
+         fromPsn(2)).
+         The pwMplsNonTeMappingXcIndex holds the XC index in the
+         MPLS-LSR-STD-MIB of the PW LDP-generated XC entry.
+         pwMplsNonTeMappingIfIndex MUST be zero for this row.
+
+         An application can use this table to quickly retrieve the
+         PW carried over specific non-TE MPLS outer tunnel or
+         physical interface.
+         "
+   INDEX  { pwMplsNonTeMappingDirection,
+            pwMplsNonTeMappingXcIndex,
+            pwMplsNonTeMappingIfIndex,
+            pwMplsNonTeMappingPwIndex }
+      ::= { pwMplsNonTeMappingTable 1 }
+
+PwMplsNonTeMappingEntry ::= SEQUENCE {
+      pwMplsNonTeMappingDirection         INTEGER,
+      pwMplsNonTeMappingXcIndex           MplsIndexType,
+      pwMplsNonTeMappingIfIndex           InterfaceIndexOrZero,
+      pwMplsNonTeMappingPwIndex           PwIndexType
+   }
+
+pwMplsNonTeMappingDirection OBJECT-TYPE
+   SYNTAX        INTEGER {
+                 psnBound (1),
+                 fromPsn  (2)
+   }
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Index for the conceptual XC row identifying the tunnel-to-PW
+        mappings, indicating the direction of the packet flow for
+        this entry.
+        psnBound(1) indicates that the entry is related to
+        packets toward the PSN.
+        fromPsn(2) indicates that the entry is related to
+        packets coming from the PSN.
+       "
+   ::= { pwMplsNonTeMappingEntry 1 }
+
+pwMplsNonTeMappingXcIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "See the description clause of pwMplsNonTeMappingEntry for
+        the usage guidelines of this object."
+   ::= { pwMplsNonTeMappingEntry 2 }
+
+pwMplsNonTeMappingIfIndex  OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "See the description clause of pwMplsNonTeMappingEntry for
+        the usage guidelines of this object."
+   ::= { pwMplsNonTeMappingEntry 3 }
+
+pwMplsNonTeMappingPwIndex  OBJECT-TYPE
+   SYNTAX        PwIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The value that represents the PW in the pwTable."
+   ::= { pwMplsNonTeMappingEntry 4 }
+
+-- End of PW to Non-TE mapping Table.
+
+-- PW to TE MPLS tunnels mapping Table.
+
+pwMplsTeMappingTable OBJECT-TYPE
+   SYNTAX           SEQUENCE OF PwMplsTeMappingEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+       "This table reports the PW association to the
+        outbound MPLS tunnel for MPLS-TE applications."
+   ::= { pwMplsObjects 5 }
+
+pwMplsTeMappingEntry OBJECT-TYPE
+   SYNTAX           PwMplsTeMappingEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+        "A row in this table represents the association
+         between a PW and its MPLS-TE outer (head-end) tunnel.
+
+         An application can use this table to quickly retrieve the
+         list of the PWs that are configured on a specific MPLS-TE
+         outer tunnel.
+
+         The pwMplsTeMappingTunnelInstance reports the actual
+         LSP out of the tunnel head-end that is currently
+         forwarding the traffic.
+
+         The table is indexed by the head-end indexes of a TE
+         tunnel and the PW index.
+        "
+   INDEX  { pwMplsTeMappingTunnelIndex,
+            pwMplsTeMappingTunnelInstance,
+            pwMplsTeMappingTunnelPeerLsrID,
+            pwMplsTeMappingTunnelLocalLsrID,
+            pwMplsTeMappingPwIndex }
+      ::= { pwMplsTeMappingTable 1 }
+
+PwMplsTeMappingEntry ::= SEQUENCE {
+      pwMplsTeMappingTunnelIndex       MplsTunnelIndex,
+      pwMplsTeMappingTunnelInstance    MplsTunnelInstanceIndex,
+      pwMplsTeMappingTunnelPeerLsrID   MplsLsrIdentifier,
+      pwMplsTeMappingTunnelLocalLsrID  MplsLsrIdentifier,
+      pwMplsTeMappingPwIndex           PwIndexType
+   }
+
+pwMplsTeMappingTunnelIndex OBJECT-TYPE
+   SYNTAX        MplsTunnelIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Primary index for the conceptual row identifying the
+        MPLS-TE tunnel that is carrying the PW traffic."
+   ::= { pwMplsTeMappingEntry 1 }
+
+pwMplsTeMappingTunnelInstance OBJECT-TYPE
+   SYNTAX        MplsTunnelInstanceIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This object identifies the MPLS-TE LSP that is carrying the
+        PW traffic.  It MUST return the value zero if the
+        information of the specific LSP is not yet known.
+        Note that based on the recommendation in the
+        MPLS-TC-STD-MIB, instance index 0 should refer to the
+        configured tunnel interface."
+   ::= { pwMplsTeMappingEntry 2 }
+
+pwMplsTeMappingTunnelPeerLsrID  OBJECT-TYPE
+   SYNTAX        MplsLsrIdentifier
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This object identifies the peer LSR when the outer tunnel
+        is MPLS-TE."
+   ::= { pwMplsTeMappingEntry 3 }
+
+pwMplsTeMappingTunnelLocalLsrID  OBJECT-TYPE
+   SYNTAX        MplsLsrIdentifier
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This object identifies the local LSR."
+   ::= { pwMplsTeMappingEntry 4 }
+
+pwMplsTeMappingPwIndex  OBJECT-TYPE
+   SYNTAX        PwIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object returns the value that represents the PW in the
+        pwTable."
+   ::= { pwMplsTeMappingEntry 5 }
+
+-- End of PW to TE MPLS tunnels mapping Table.
+
+-- conformance information
+
+pwMplsGroups      OBJECT IDENTIFIER ::= { pwMplsConformance 1 }
+pwMplsCompliances OBJECT IDENTIFIER ::= { pwMplsConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+
+pwMplsModuleFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that provide full
+             support for the PW-MPLS-STD-MIB module.  Such devices
+             can then be monitored and also be configured using
+             this MIB module."
+
+   MODULE  -- this module
+   MANDATORY-GROUPS { pwMplsGroup,
+                      pwMplsOutboundMainGroup,
+                      pwMplsInboundGroup,
+                      pwMplsMappingGroup
+                     }
+
+   GROUP        pwMplsOutboundTeGroup
+   DESCRIPTION "This group MUST be supported if the implementation
+                allows MPLS-TE tunnels to carry PW traffic.
+                "
+
+   OBJECT       pwMplsMplsType
+   DESCRIPTION "Support of pwOnly(2) is not required.  At least one
+                of mplsTe(0) or mplsNonTe(1) MUST be supported if
+                signaling of PW is supported.
+                "
+
+   OBJECT       pwMplsExpBitsMode
+   DESCRIPTION "Support of specifiedValue(2) and
+                serviceDependant(3) is optional.
+                "
+
+   OBJECT       pwMplsLocalLdpID
+   MIN-ACCESS   read-only
+   DESCRIPTION "A read-write access is required if the
+                implementation supports more than one LDP entity
+                identifier for PW signaling.
+                "
+
+   OBJECT       pwMplsLocalLdpEntityIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "A read-write access is required if the
+                implementation supports more than one LDP entity
+                index for PW signaling.
+                "
+
+   OBJECT       pwMplsOutboundLsrXcIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "A value other than zero MUST be supported if the
+                implementation supports non-TE signaling of the
+                outer tunnel.
+                A read-write access MUST be supported if the
+                implementation supports PW label manual setting
+                and carrying them over non-TE tunnels.
+                "
+
+   OBJECT       pwMplsOutboundIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "A value other than zero and read-write operations
+                MUST be supported if the implementation supports
+                manually configured PW without MPLS outer tunnel.
+                "
+    ::= { pwMplsCompliances 1 }
+
+-- Compliance requirement for Read Only compliant implementations.
+
+pwMplsModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that provide read-
+             only support for the PW-MPLS-STD-MIB module.  Such
+             devices can then be monitored but cannot be configured
+             using this MIB module."
+
+   MODULE  -- this module
+   MANDATORY-GROUPS { pwMplsGroup,
+                      pwMplsOutboundMainGroup,
+                      pwMplsInboundGroup,
+                      pwMplsMappingGroup
+                     }
+
+   GROUP        pwMplsOutboundTeGroup
+   DESCRIPTION "This group MUST be supported if the implementation
+                allows MPLS-TE tunnels to carry PW traffic.
+                "
+
+   OBJECT       pwMplsMplsType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                Support of pwOnly(2) is not required.  At least one
+                of mplsTe(0) or mplsNonTe(1) MUST be supported if
+                signaling of PW is supported.
+                "
+
+   OBJECT       pwMplsExpBitsMode
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                Support of specifiedValue(2) and serviceDependant(3)
+                is optional.
+                "
+   OBJECT       pwMplsExpBits
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+   OBJECT       pwMplsTtl
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsLocalLdpID
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsLocalLdpEntityIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsOutboundLsrXcIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                A value other than zero MUST be supported if the
+                implementation supports non-TE signaling of the
+                outer tunnel.
+                "
+
+   OBJECT       pwMplsOutboundTunnelIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsOutboundTunnelLclLSR
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsOutboundTunnelPeerLSR
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                "
+
+   OBJECT       pwMplsOutboundIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.
+                A value other than zero MUST be supported if the
+                implementation supports manually configured PW
+                without MPLS outer tunnel.
+                "
+    ::= { pwMplsCompliances 2 }
+
+-- Units of conformance.
+
+pwMplsGroup OBJECT-GROUP
+   OBJECTS {
+            pwMplsMplsType,
+            pwMplsExpBitsMode,
+            pwMplsExpBits,
+            pwMplsTtl,
+            pwMplsLocalLdpID,
+            pwMplsLocalLdpEntityIndex,
+            pwMplsPeerLdpID,
+            pwMplsStorageType
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects needed for PW over MPLS PSN
+        configuration."
+   ::= { pwMplsGroups 1 }
+
+pwMplsOutboundMainGroup OBJECT-GROUP
+   OBJECTS {
+            pwMplsOutboundLsrXcIndex,
+            pwMplsOutboundIfIndex,
+            pwMplsOutboundTunnelTypeInUse
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects needed for outbound association of
+        PW and MPLS tunnel."
+   ::= { pwMplsGroups 2 }
+
+pwMplsOutboundTeGroup OBJECT-GROUP
+   OBJECTS {
+            pwMplsOutboundTunnelIndex,
+            pwMplsOutboundTunnelInstance,
+            pwMplsOutboundTunnelLclLSR,
+            pwMplsOutboundTunnelPeerLSR
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects needed for outbound association of
+        PW and MPLS-TE tunnel."
+   ::= { pwMplsGroups 3 }
+
+pwMplsInboundGroup OBJECT-GROUP
+   OBJECTS {
+            pwMplsInboundXcIndex
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects needed for inbound PW presentation.
+        This group MUST be supported if PW signaling through LDP is
+        used."
+   ::= { pwMplsGroups 4 }
+
+pwMplsMappingGroup OBJECT-GROUP
+   OBJECTS {
+            pwMplsNonTeMappingPwIndex,
+            pwMplsTeMappingPwIndex
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects needed for mapping association of
+        PW and MPLS tunnel."
+   ::= { pwMplsGroups 5 }
+
+END
diff --git a/snmp_builder/mibs/PW-STD-MIB.mib b/snmp_builder/mibs/PW-STD-MIB.mib
new file mode 100644
index 0000000..46628a2
--- /dev/null
+++ b/snmp_builder/mibs/PW-STD-MIB.mib
@@ -0,0 +1,2438 @@
+PW-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE,
+   Integer32, Unsigned32, Counter32, Counter64, TimeTicks,
+   transmission
+      FROM SNMPv2-SMI                    -- [RFC2578]
+
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF                   -- [RFC2580]
+
+   TruthValue, RowStatus, StorageType,
+   TimeStamp
+      FROM SNMPv2-TC                     -- [RFC2579]
+
+   SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB            -- [RFC3411]
+
+   InterfaceIndexOrZero
+      FROM IF-MIB                        -- [RFC2863]
+
+   InetAddressType, InetAddress
+      FROM INET-ADDRESS-MIB              -- [RFC4001]
+
+   PerfCurrentCount, PerfIntervalCount
+      FROM PerfHist-TC-MIB               -- [RFC3593]
+
+   HCPerfCurrentCount, HCPerfIntervalCount, HCPerfTimeElapsed,
+   HCPerfValidIntervals
+      FROM HC-PerfHist-TC-MIB            -- [RFC3705]
+
+   PwIndexType, PwIndexOrZeroType, PwGroupID, PwIDType,
+   PwOperStatusTC, PwAttachmentIdentifierType, PwCwStatusTC,
+   PwStatus, PwFragSize, PwFragStatus, PwGenIdType
+      FROM PW-TC-STD-MIB                 -- [RFC5542]
+   IANAPwTypeTC, IANAPwPsnTypeTC, IANAPwCapabilities
+      FROM IANA-PWE3-MIB                 -- [RFC5601]
+;
+
+pwStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200906110000Z"  -- 11 June 2009 00:00:00 GMT
+   ORGANIZATION "Pseudowire Edge-to-Edge Emulation (PWE3) Working
+                 Group"
+   CONTACT-INFO
+      "David Zelig
+       Email: davidz@oversi.com
+
+       Thomas D. Nadeau
+       Email: tom.nadeau@bt.com
+
+       The PWE3 Working Group (email distribution pwe3@ietf.org,
+       http://www.ietf.org/html.charters/pwe3-charter.html)
+       "
+   DESCRIPTION
+      "This MIB module contains managed object definitions for
+       pseudowire operation as in Bryant, S. and P. Pate, 'Pseudo
+       Wire Emulation Edge-to-Edge (PWE3) Architecture' [RFC3985],
+       Martini, L., et al, 'Pseudowire Setup and Maintenance Using
+       the Label Distribution Protocol (LDP)' [RFC4447], and
+       Townsley, M., et al, 'Layer Two Tunneling Protocol
+       (Version 3)' [RFC3931].
+
+       This MIB module enables the use of any underlying packet
+       switched network (PSN).  MIB nodules that will support
+       PW operations over specific PSN types are defined in
+       separate memos.
+
+       The indexes for this MIB module are also used to index the
+       PSN-specific tables and the PW-specific tables.  The PW Type
+       dictates which PW-specific MIB module to use.
+
+       Copyright (c) 2009 IETF Trust and the persons identified
+       as authors of the code.  All rights reserved.
+
+       Redistribution and use in source and binary forms, with or
+       without modification, are permitted provided that the following
+       conditions are met:
+
+       - Redistributions of source code must retain the above
+         copyright notice, this list of conditions and the following
+         disclaimer.
+
+       - Redistributions in binary form must reproduce the above
+         copyright notice, this list of conditions and the following
+         disclaimer in the documentation and/or other materials
+         provided with the distribution.
+
+       - Neither the name of Internet Society, IETF or IETF Trust, nor
+         the names of specific contributors, may be used to endorse or
+         promote products derived from this software without specific
+         prior written permission.
+
+       THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+       CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+       INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+       MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+       DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+       CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+       SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+       NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+       LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+       HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+       CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+       OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+       EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+       This version of this MIB module is part of RFC 5601;
+       see the RFC itself for full legal notices.
+       "
+
+   -- Revision history.
+   REVISION
+       "200906110000Z"  -- 11 June 2009 00:00:00 GMT
+   DESCRIPTION "Initial version published as part of RFC 5601."
+      ::= { transmission 246 }
+
+-- Top-level components of this MIB.
+
+-- Notifications
+pwNotifications OBJECT IDENTIFIER
+                              ::= { pwStdMIB 0 }
+-- Tables, Scalars
+pwObjects       OBJECT IDENTIFIER
+                              ::= { pwStdMIB 1 }
+-- Conformance
+pwConformance   OBJECT IDENTIFIER
+                              ::= { pwStdMIB 2 }
+
+-- PW Virtual Connection Table
+
+pwIndexNext OBJECT-TYPE
+   SYNTAX            Unsigned32
+   MAX-ACCESS        read-only
+   STATUS            current
+   DESCRIPTION
+       "This object contains an appropriate value to be used for
+        pwIndex when creating entries in the pwTable.  The value 0
+        indicates that no unassigned entries are available.  To
+        obtain the value of pwIndex for a new entry in the pwTable,
+        the manager issues a management protocol retrieval
+        operation.  The agent will determine through its local policy
+        when this index value will be made available for reuse."
+   ::= { pwObjects 1 }
+
+pwTable   OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies information for configuring and
+        status monitoring that is common to all service types
+        and PSN types."
+   ::= { pwObjects 2 }
+
+pwEntry   OBJECT-TYPE
+   SYNTAX        PwEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "A row in this table represents a pseudowire (PW) virtual
+         connection across a packet network.  It is indexed by
+         pwIndex, which uniquely identifies a singular
+         connection.
+         A row can be created by an operator command from a
+         management plan of a PE, by signaling, or due to auto-
+         discovery process.  An operator's command can be issued via
+         a non-SNMP application; in such case, a row will be created
+         implicitly by the agent.
+         The read-create objects in this table are divided into
+         three categories:
+         1) Objects that MUST NOT be changed after row activation.
+            These are objects that define basic properties of the
+            PW (for example type, destination, etc.).
+         2) Objects that MAY be changed when the PW is
+            defined as not active.  A change of these objects involves
+            re-signaling of the PW or it might be traffic affecting.
+            PW not active is defined as one of the following
+            conditions:
+                a) The pwRowStatus is notInService(2).
+                b) The pwRowStatus is notReady(3).
+                c) The pwAdminStatus is down(2).
+         If the operator needs to change one of the values for an
+         active row, the operator can either set the pwRowStatus to
+         notInService(2) or set pwAdminStatus to down(2).
+         Signaling (or traffic) is initiated again upon setting
+         the pwRowStatus to active(1) or setting the pwAdminStatus
+         to up(1) or testing(3), respectively.
+
+         3) Objects that MAY be changed at any time.
+
+         A PW MAY have an entry in the ifTable in addition to the
+         entry in this table.  In this case, a special ifType for PW
+         will be set in the ifTable, and the ifIndex in the ifTable
+         of the PW will be set in the pwIfIndex object in this table.
+
+         By default, all the read-create objects MUST NOT be
+         changed after row activation, unless specifically indicated
+         in the individual object description.
+
+         Manual entries in this table SHOULD be preserved after a
+         reboot; the agent MUST ensure the integrity of those
+         entries.  If the set of entries of a specific row are found
+         to be inconsistent after reboot, the PW pwOperStatus MUST
+         be declared as notPresent(5).
+         "
+   INDEX  { pwIndex }
+          ::= { pwTable 1 }
+
+PwEntry ::= SEQUENCE {
+      pwIndex               PwIndexType,
+      pwType                IANAPwTypeTC,
+      pwOwner               INTEGER,
+      pwPsnType             IANAPwPsnTypeTC,
+      pwSetUpPriority       Integer32,
+      pwHoldingPriority     Integer32,
+      pwPeerAddrType        InetAddressType,
+      pwPeerAddr            InetAddress,
+      pwAttachedPwIndex     PwIndexOrZeroType,
+      pwIfIndex             InterfaceIndexOrZero,
+      pwID                  PwIDType,
+      pwLocalGroupID        PwGroupID,
+      pwGroupAttachmentID   PwAttachmentIdentifierType,
+      pwLocalAttachmentID   PwAttachmentIdentifierType,
+      pwRemoteAttachmentID  PwAttachmentIdentifierType,
+      pwCwPreference        TruthValue,
+      pwLocalIfMtu          Unsigned32,
+      pwLocalIfString       TruthValue,
+      pwLocalCapabAdvert    IANAPwCapabilities,
+      pwRemoteGroupID       PwGroupID,
+      pwCwStatus            PwCwStatusTC,
+      pwRemoteIfMtu         Unsigned32,
+      pwRemoteIfString      SnmpAdminString,
+      pwRemoteCapabilities  IANAPwCapabilities,
+      pwFragmentCfgSize     PwFragSize,
+      pwRmtFragCapability   PwFragStatus,
+      pwFcsRetentionCfg     INTEGER,
+      pwFcsRetentionStatus  BITS,
+      pwOutboundLabel       Unsigned32,
+      pwInboundLabel        Unsigned32,
+      pwName                SnmpAdminString,
+      pwDescr               SnmpAdminString,
+      pwCreateTime          TimeStamp,
+      pwUpTime              TimeTicks,
+      pwLastChange          TimeTicks,
+      pwAdminStatus         INTEGER,
+      pwOperStatus          PwOperStatusTC,
+      pwLocalStatus         PwStatus,
+      pwRemoteStatusCapable INTEGER,
+      pwRemoteStatus        PwStatus,
+      pwTimeElapsed         HCPerfTimeElapsed,
+      pwValidIntervals      HCPerfValidIntervals,
+      pwRowStatus           RowStatus,
+      pwStorageType         StorageType,
+      pwOamEnable           TruthValue,
+      pwGenAGIType          PwGenIdType,
+      pwGenLocalAIIType     PwGenIdType,
+      pwGenRemoteAIIType    PwGenIdType
+   }
+
+pwIndex OBJECT-TYPE
+   SYNTAX        PwIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "A unique index for the conceptual row identifying a PW within
+        this table."
+   ::= { pwEntry 1 }
+
+pwType OBJECT-TYPE
+   SYNTAX        IANAPwTypeTC
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value indicates the emulated service to be carried over
+        this PW.
+       "
+   ::= { pwEntry 2 }
+
+pwOwner OBJECT-TYPE
+   SYNTAX   INTEGER {
+          manual                (1),
+          pwIdFecSignaling      (2), -- PW signaling with PW ID FEC
+          genFecSignaling       (3), -- Generalized attachment FEC
+          l2tpControlProtocol   (4),
+          other                 (5)
+                    }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This object is set by the operator to indicate the protocol
+         responsible for establishing this PW.
+         'manual' is used in all cases where no maintenance
+         protocol (PW signaling) is used to set up the PW, i.e.,
+         configuration of entries in the PW tables including
+         PW labels, etc., is done by setting the MIB fields manually.
+         'pwIdFecSignaling' is used in case of signaling with the
+         Pwid FEC element with LDP signaling.
+         'genFecSignaling' is used in case of LDP signaling with
+         the generalized FEC.
+         'l2tpControlProtocol' indicates the use of the L2TP
+         control protocol.
+         'other' is used for other types of signaling."
+   ::= { pwEntry 3 }
+
+pwPsnType OBJECT-TYPE
+   SYNTAX   IANAPwPsnTypeTC
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This object is set by the operator to indicate the PSN type.
+         Based on this object, the relevant PSN table's entry is
+         created in the PSN-specific MIB modules.
+        "
+   ::= { pwEntry 4 }
+
+pwSetUpPriority  OBJECT-TYPE
+   SYNTAX         Integer32 (0..7)
+   MAX-ACCESS     read-create
+   STATUS         current
+   DESCRIPTION
+        "This object defines the relative priority of the PW
+         during set-up in a lowest-to-highest fashion, where 0
+         is the highest priority.  PWs with the same priority
+         are treated with equal priority.  PWs that have not yet
+
+         completed setup will report 'dormant' in the
+         pwOperStatus.
+         This value is significant if there are competing resources
+         among PWs and the implementation supports this feature.
+         Equal priority handling with competing resources is
+         implementation specific.
+         This object MAY be changed at any time."
+   DEFVAL { 0 }
+   ::= { pwEntry 5 }
+
+pwHoldingPriority  OBJECT-TYPE
+   SYNTAX         Integer32 (0..7)
+   MAX-ACCESS     read-create
+   STATUS         current
+   DESCRIPTION
+        "This object defines the relative holding priority of the
+         PW in a lowest-to-highest fashion, where 0 is the highest
+         priority.  PWs with the same priority are treated equally.
+         This value is significant if there are competing resources
+         among PWs and the implementation supports this feature.
+         Equal priority handling with competing resources is
+         implementation specific.
+         This object MAY be changed only if the PW is not active."
+   DEFVAL { 0 }
+   ::= { pwEntry 6 }
+
+pwPeerAddrType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes the address type of the peer node.  It should be
+         set to 'unknown' if PE/PW maintenance protocol is not used
+         and the address is unknown."
+   DEFVAL { ipv4 }
+   ::= { pwEntry 8 }
+
+pwPeerAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This object contains the value of the peer node address
+         of the PW/PE maintenance protocol entity.  This object
+         SHOULD contain a value of all zeroes if not applicable
+         (pwPeerAddrType is 'unknown')."
+   ::= { pwEntry 9 }
+
+pwAttachedPwIndex OBJECT-TYPE
+   SYNTAX        PwIndexOrZeroType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If the PW is attached to another PW instead of a local
+        native service, this item indicates the pwIndex of the
+        attached PW.  Otherwise, this object MUST
+        be set to zero.  Attachment to another PW will have no
+        PW specific entry in any of the service MIB modules."
+   DEFVAL { 0 }
+   ::= { pwEntry 10 }
+
+pwIfIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object indicates the ifIndex of the PW if the PW is
+        represented in the ifTable.  Otherwise, it MUST be set
+        to zero."
+   DEFVAL { 0 }
+   ::= { pwEntry 11 }
+
+pwID OBJECT-TYPE
+   SYNTAX        PwIDType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Pseudowire identifier.
+
+        If the pwOwner object is 'pwIdFecSignaling' or
+        'l2tpControlProtocol', then this object is signaled in the
+        outgoing PW ID field within the 'Virtual Circuit FEC
+        Element'.  For other values of pwOwner, this object is not
+        signaled and it MAY be set to zero.
+
+        For implementations that support the pwIndexMappingTable,
+        a non-zero value is RECOMMENDED, even if this
+        identifier is not signaled.  This is so that reverse
+        mappings can be provided by pwIndexMappingTable and
+        pwPeerMappingTable.  It is therefore RECOMMENDED that the
+        value of this pwID be unique (or if pwPeerAddrType is not
+        'unknown', at least [pwType, pwID, pwPeerAddrType, pwPeerAddr]
+        is unique.)"
+    REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 12 }
+
+pwLocalGroupID OBJECT-TYPE
+   SYNTAX        PwGroupID
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Used in the Group ID field sent to the peer PW End Service
+        within the maintenance protocol used for PW setup.
+        It SHOULD be set to zero if a maintenance protocol is
+        not used."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 13 }
+
+pwGroupAttachmentID OBJECT-TYPE
+   SYNTAX        PwAttachmentIdentifierType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is an octet string representing the attachment
+        group identifier (AGI) that this PW belongs to, which
+        typically identifies the VPN ID.
+        Applicable if pwOwner equals 'genFecSignaling'."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 14 }
+
+pwLocalAttachmentID   OBJECT-TYPE
+   SYNTAX        PwAttachmentIdentifierType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is an octet string representing the local
+        forwarder attachment individual identifier (AII) to be
+        used by this PW.  It is used as the Source AII (SAII) for
+        outgoing signaling messages and the Target AII (TAII) in
+        the incoming messages from the peer.  Applicable if
+        pwOwner equal 'genFecSignaling'."
+    REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 15 }
+
+pwRemoteAttachmentID   OBJECT-TYPE
+   SYNTAX        PwAttachmentIdentifierType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is an octet string representing the remote
+        forwarder attachment individual identifier (AII) to be
+        used by this PW.  It is used as the TAII for outgoing
+        signaling messages and the SAII in the incoming messages
+        from the peer.
+        Applicable if pwOwner equals 'genFecSignaling'."
+    REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 16 }
+
+pwCwPreference OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Defines if the control word will be sent with each packet
+        by the local node.  Some PW types mandate the use of a
+        control word, and in such cases, the value configured for
+        this object has no effect on the existence of the control
+        word.
+        This object MAY be changed only if the PW is not active."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol.', RFC 4447."
+   DEFVAL { false }
+   ::= { pwEntry 17 }
+
+pwLocalIfMtu OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..65535)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If not equal to zero, the optional IfMtu object in the
+        signaling protocol will be sent with this value, which
+        represents the locally supported MTU size over the
+        interface (or the virtual interface) associated with the
+        PW.
+        This object MAY be changed only if the PW is not active."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   DEFVAL { 0 }
+   ::= { pwEntry 18 }
+
+pwLocalIfString OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "A PW MAY be associated to an interface (or a virtual
+        interface) in the ifTable of the node as part of the
+        service configuration.  This object defines if the
+        maintenance protocol will send the interface's name
+        (ifAlias) as it appears in the ifTable.  If set to false,
+        the optional element will not be sent.
+        This object MAY be changed only if the PW is not active."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447, section 5.5."
+   DEFVAL { false }
+   ::= { pwEntry 19 }
+
+pwLocalCapabAdvert OBJECT-TYPE
+   SYNTAX        IANAPwCapabilities
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If a maintenance protocol is used, it indicates the
+        capabilities the local node will advertise to the peer.  The
+        operator MAY selectively assign a partial set of
+        capabilities.  In case of manual configuration of the PW, the
+        operator SHOULD set non-conflicting options (for example,
+        only a single type of Operations, Administration, and
+        Management (OAM)) out of the available options in the
+        implementation.  It is possible to change the value of
+        this object when the PW is not active.  The agent MUST
+        reject any attempt to set a capability that is not
+        supported.
+
+        The default value MUST be the full set of local node
+        capabilities."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 20 }
+
+pwRemoteGroupID OBJECT-TYPE
+   SYNTAX        PwGroupID
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object is obtained from the Group ID field as
+        received via the maintenance protocol used for PW setup.
+        Value of zero will be reported if not used.
+        Value of 0xFFFFFFFF shall be used if the object is yet to be
+        defined by the PW maintenance protocol."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 21 }
+
+pwCwStatus OBJECT-TYPE
+   SYNTAX        PwCwStatusTC
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "If signaling is used for PW establishment, this object
+        indicates the status of the control word negotiation.
+        For either signaling or manual configuration, it indicates
+        if the control word (CW) is to be present for this PW."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 22 }
+
+pwRemoteIfMtu OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The remote interface MTU as (optionally) received from the
+        remote node via the maintenance protocol.  The object SHOULD
+        report zero if the MTU is not available."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 23 }
+
+pwRemoteIfString OBJECT-TYPE
+   SYNTAX        SnmpAdminString (SIZE (0..80))
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Indicates the interface description string as received by
+        the maintenance protocol.  It MUST be a NULL string if a
+        maintenance protocol is not used or the value is not known
+        yet."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447, section 5.5."
+   ::= { pwEntry 24 }
+
+pwRemoteCapabilities OBJECT-TYPE
+   SYNTAX        IANAPwCapabilities
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Indicates the capabilities as received from the peer."
+   REFERENCE
+       "Martini, et al, 'Pseudowire Setup and Maintenance using
+        the Label Distribution Protocol', RFC 4447."
+   ::= { pwEntry 25 }
+
+pwFragmentCfgSize OBJECT-TYPE
+   SYNTAX        PwFragSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If set to a value other than zero, indicates that
+        fragmentation is desired for this PW.
+        This object MAY be changed only if the PW is not active."
+   REFERENCE
+       "Malis A., Townsley M., 'PWE3 Fragmentation and Reassembly',
+        RFC 4623."
+   DEFVAL { 0 } -- i.e., fragmentation not desired
+   ::= { pwEntry 26 }
+
+pwRmtFragCapability OBJECT-TYPE
+   SYNTAX        PwFragStatus
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The status of the fragmentation based on the local
+        configuration and the peer capabilities as received from
+        the peer when a control protocol is used."
+   REFERENCE
+       "Malis A., Townsley M., 'PWE3 Fragmentation and Reassembly',
+        RFC 4623."
+   ::= { pwEntry 27 }
+
+pwFcsRetentionCfg OBJECT-TYPE
+   SYNTAX        INTEGER {
+                 fcsRetentionDisable  (1),
+                 fcsRetentionEnable   (2)
+
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The local configuration of Frame Check Sequence (FCS)
+        retention for this PW.  FCS retention can be configured for
+        PW types High-Level Data Link Control (HDLC), Point-to-Point
+        Protocol (PPP), and Ethernet only.  If the implementation
+        does not support FCS retention, an error MUST be reported in
+        pwFcsRetentionStatus.  This object MAY be changed only if
+        the PW is not active."
+   REFERENCE
+       "Malis A., et al., 'PWE3 Frame Check Sequence Retention',
+        RFC 4720."
+   DEFVAL { fcsRetentionDisable }
+   ::= { pwEntry 28 }
+
+pwFcsRetentionStatus OBJECT-TYPE
+   SYNTAX   BITS {
+            remoteIndicationUnknown     (0),
+            remoteRequestFcsRetention   (1),
+            fcsRetentionEnabled         (2),
+            fcsRetentionDisabled        (3),
+            localFcsRetentionCfgErr     (4),
+            fcsRetentionFcsSizeMismatch (5)
+            }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+      "The status of the FCS retention negotiation process based on
+       local configuration and the remote advertisement.
+
+       remoteIndicationUnknown - set if a FEC has not been received
+          from the remote.
+
+       remoteRequestFcsRetention - indicates that the peer has
+          requested FCS retention.  FCS retention will be used if
+          the local node is capable and configured to use it for
+          this PW.
+
+       fcsRetentionEnabled - FCS retention is enabled (both peers
+          were configured for FCS retention for signaled PW, or the
+          local node is configured and capable of FCS retention for
+          manually assigned PWs).
+
+       fcsRetentionDisabled - FCS retention is disabled (not
+          configured locally or not advertised by the peer).
+
+       localFcsRetentionCfgErr - set if the local node has been
+          configured for FCS retention but is not capable to support
+          it.
+
+       fcsRetentionFcsSizeMismatch - set if there is an FCS size
+          mismatch between the local and the peer node.
+      "
+   REFERENCE
+       "Malis A., et al., 'PWE3 Frame Check Sequence Retention',
+        RFC 4720"
+   ::= { pwEntry 29 }
+
+pwOutboundLabel OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The PW label used in the outbound direction (i.e., toward
+        the PSN).  It might be set manually if pwOwner is 'manual';
+        otherwise, it is set automatically.
+        For MPLS, MPLS over IP, or MPLS over Generic Routing
+        Encapsulation (GRE) PSN, it represents the 20-bit PW tag;
+        for L2TP, it represents the 32-bit Session ID; and for
+        IP PSN, it represents the destination UDP port number.
+        If the label is not yet known (signaling in process), the
+        object SHOULD return a value of 0xFFFFFFFF.
+        For manual configuration, this object MAY be changed only
+        if the PW is not active."
+   ::= { pwEntry 30 }
+
+pwInboundLabel OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The PW label used in the inbound direction (i.e., packets
+        received from the PSN).  It may be set manually if pwOwner
+        is 'manual'; otherwise, it is set automatically.
+        For MPLS, MPLS over IP, or MPLS over GRE PSN, it represents
+        the 20-bit PW tag; for L2TP, it represents the 32-bit
+        Session ID; and for IP PSN, it represents the source
+        UDP port number.
+        If the label is not yet known (signaling in process), the
+        object SHOULD return a value of 0xFFFFFFFF.
+        For manual configuration, this object MAY be changed only
+        if the PW is not active."
+   ::= { pwEntry 31 }
+
+pwName  OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The canonical name assigned to the PW.  This object MAY be
+        changed at any time."
+   ::= { pwEntry 32 }
+
+pwDescr OBJECT-TYPE
+   SYNTAX        SnmpAdminString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "A textual string containing information about the PW.
+        If there is no description, this object contains a zero-
+        length string.  This object MAY be changed at any time."
+   ::= { pwEntry 33 }
+
+pwCreateTime OBJECT-TYPE
+   SYNTAX        TimeStamp
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The value of sysUpTime at the time this PW was created."
+   ::= { pwEntry 34 }
+
+pwUpTime  OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Specifies the time since last change of pwOperStatus to
+        Up(1)."
+   ::= { pwEntry 35 }
+
+pwLastChange OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+      "The value of sysUpTime at the time the PW entered
+       its current operational state.  If the current state was
+       entered prior to the last re-initialization of the local
+       network management subsystem, then this object contains a
+       zero value."
+   ::= { pwEntry 36 }
+
+pwAdminStatus OBJECT-TYPE
+   SYNTAX   INTEGER {
+                up(1),     -- ready to pass packets
+                down(2),
+                testing(3) -- in a test mode
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The desired operational status of this PW.  This object MAY
+        be set at any time."
+   ::= { pwEntry 37 }
+
+pwOperStatus OBJECT-TYPE
+   SYNTAX        PwOperStatusTC
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This object indicates the operational status of the PW; it
+         does not reflect the status of the Customer Edge (CE) bound
+         interface.  It is set to down only if pwNotForwarding,
+         psnFacingPwRxFault, or psnFacingPwTxFault indications are
+         set in pwLocalStatus or pwRemoteStatus.
+         It indicates 'lowerLayerDown' if the only reason for
+         not being in the 'up' state is that either the outer tunnel
+         or physical layer of the network side is in the 'down'
+         state.
+         All other states are declared based on the description
+         of the PwOperStatusTC.
+         "
+   ::= { pwEntry 38 }
+
+pwLocalStatus OBJECT-TYPE
+   SYNTAX        PwStatus
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Indicates the status of the PW in the local node.
+         The various indications in this object SHOULD be
+         available independent of the ability of the local node to
+         advertise them or the remote node to accept these status
+         indications through the control protocol.
+        "
+   ::= { pwEntry 39 }
+
+pwRemoteStatusCapable OBJECT-TYPE
+   SYNTAX        INTEGER {
+          notApplicable    (1),
+          notYetKnown      (2),
+          remoteCapable    (3),
+          remoteNotCapable (4)
+   }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Indicates the remote node capability to advertise the
+         PW status notification.
+         notApplicable SHOULD be reported for a manually set PW, or
+         if the local node is not capable of accepting the status
+         notification object.
+         notYetKnown SHOULD be reported if the signaling protocol
+         has not yet finished the process of capability
+         determination.
+         remoteCapable and remoteNotcapable SHOULD be reported
+         based on the initial signaling exchange that has
+         determined the remote node capability.
+       "
+   ::= { pwEntry 40 }
+
+pwRemoteStatus OBJECT-TYPE
+   SYNTAX        PwStatus
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Indicates the status of the PW as was advertised by the
+         remote.  If the remote is not capable of advertising the
+         status object, or the local node is not able to accept
+         the status object through signaling, then the applicable
+         bit is 'pwNotForwarding', which is set if the remote has
+         sent label release or label withdraw for this PW.
+        "
+   ::= { pwEntry 41 }
+
+pwTimeElapsed OBJECT-TYPE
+    SYNTAX  HCPerfTimeElapsed
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The number of seconds, including partial seconds,
+          that have elapsed since the beginning of the current
+          interval measurement period."
+   ::= { pwEntry 42 }
+
+pwValidIntervals OBJECT-TYPE
+    SYNTAX  HCPerfValidIntervals
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The number of previous 15-minute intervals
+       for which data was collected."
+   ::= { pwEntry 43 }
+
+pwRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        This object MAY be changed at any time."
+   ::= { pwEntry 44 }
+
+pwStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object."
+   DEFVAL { nonVolatile }
+   ::= { pwEntry 45 }
+
+pwOamEnable  OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates if OAM is enabled for this
+        PW.  It MAY be changed at any time."
+   DEFVAL { true }
+   ::= { pwEntry 46 }
+
+pwGenAGIType OBJECT-TYPE
+   SYNTAX        PwGenIdType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the AGI type if generalized FEC
+        (129) is used for PW signaling or configuration.  It SHOULD
+        return the value of zero otherwise."
+   DEFVAL { 0 }
+   ::= { pwEntry 47 }
+
+pwGenLocalAIIType OBJECT-TYPE
+   SYNTAX        PwGenIdType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is the type of the local forwarder
+        attachment individual identifier (AII) to be used
+        by this PW if generalized FEC (129) is used for PW
+        signaling or configuration."
+   DEFVAL { 0 }
+   ::= { pwEntry 48 }
+
+pwGenRemoteAIIType OBJECT-TYPE
+   SYNTAX        PwGenIdType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object is the type of the remote forwarder
+        attachment individual identifier (AII) to be used
+        by this PW if generalized FEC (129) is used for PW
+        signaling or configuration."
+   DEFVAL { 0 }
+   ::= { pwEntry 49 }
+
+-- End of the PW Virtual Connection Table
+
+-- PW Performance Table
+
+pwPerfCurrentTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwPerfCurrentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table provides per-PW performance information for
+         the current interval."
+   ::= { pwObjects 3 }
+
+pwPerfCurrentEntry OBJECT-TYPE
+   SYNTAX        PwPerfCurrentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is created by the agent for
+         every PW."
+   INDEX  { pwIndex }
+   ::= { pwPerfCurrentTable 1 }
+
+PwPerfCurrentEntry ::= SEQUENCE {
+      pwPerfCurrentInHCPackets         HCPerfCurrentCount,
+      pwPerfCurrentInHCBytes           HCPerfCurrentCount,
+      pwPerfCurrentOutHCPackets        HCPerfCurrentCount,
+      pwPerfCurrentOutHCBytes          HCPerfCurrentCount,
+      pwPerfCurrentInPackets           PerfCurrentCount,
+      pwPerfCurrentInBytes             PerfCurrentCount,
+      pwPerfCurrentOutPackets          PerfCurrentCount,
+      pwPerfCurrentOutBytes            PerfCurrentCount
+      }
+
+pwPerfCurrentInHCPackets OBJECT-TYPE
+   SYNTAX        HCPerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of packets received by
+         the PW (from the PSN) in the current 15-minute
+         interval.  This is the 64-bit version of
+         pwPerfCurrentInPackets, if pwPerfCurrentInHCPackets
+         is supported according to the rules spelled out
+         in RFC 2863."
+   ::= { pwPerfCurrentEntry 1 }
+
+pwPerfCurrentInHCBytes OBJECT-TYPE
+   SYNTAX        HCPerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of bytes received by the
+         PW (from the PSN) in the current 15-minute interval.
+         This is the 64-bit version of pwPerfCurrentInBytes, if
+         pwPerfCurrentInHCBytes is supported according to the
+         rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 2 }
+
+pwPerfCurrentOutHCPackets OBJECT-TYPE
+   SYNTAX        HCPerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of packets forwarded by
+         the PW (to the PSN) in the current 15-minute interval.
+         This is the 64-bit version of pwPerfCurrentOutPackets,
+         if pwPerfCurrentOutHCPackets is supported according to
+         the rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 3 }
+
+pwPerfCurrentOutHCBytes OBJECT-TYPE
+   SYNTAX        HCPerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of bytes forwarded by
+         the PW (to the PSN) in the current 15-minute interval.
+         This is the 64-bit version of pwPerfCurrentOutBytes,
+         if pwPerfCurrentOutHCBytes is supported according to
+         the rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 4 }
+
+pwPerfCurrentInPackets OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The counter for number of packets received by the PW (from
+         the PSN) in the current 15-minute interval.
+         This is the 32-bit version of pwPerfCurrentInHCPackets,
+         if pwPerfCurrentInHCPackets is supported according to
+         the rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 5 }
+
+pwPerfCurrentInBytes OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The counter for number of bytes received by the
+         PW (from the PSN) in the current 15-minute interval.
+         It MUST be equal to the least significant 32 bits of
+         pwPerfCurrentInHCBytes, if pwPerfCurrentInHCBytes is
+         supported according to the rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 6 }
+
+pwPerfCurrentOutPackets OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The counter for number of packets forwarded by
+         the PW (to the PSN) in the current 15-minute interval.
+         It MUST be equal to the least significant 32 bits of
+         pwPerfCurrentOutHCPackets, if
+         pwPerfCurrentOutHCPackets is supported according to the
+         rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 7 }
+
+pwPerfCurrentOutBytes OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The counter for number of bytes forwarded by
+         the PW (to the PSN) in the current 15-minute interval.
+         It MUST be equal to the least significant 32 bits of
+         pwPerfCurrentOutHCBytes, if pwPerfCurrentOutHCBytes is
+         supported according to the rules spelled out in RFC 2863."
+   ::= { pwPerfCurrentEntry 8 }
+
+-- End of the PW Performance Current Table
+
+-- PW Performance Interval Table
+
+pwPerfIntervalTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwPerfIntervalEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table provides per-PW performance information for
+         each interval."
+   ::= { pwObjects 4 }
+
+pwPerfIntervalEntry OBJECT-TYPE
+   SYNTAX        PwPerfIntervalEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is created by the agent for every
+         PW."
+   INDEX  { pwIndex, pwPerfIntervalNumber }
+   ::= { pwPerfIntervalTable 1 }
+
+PwPerfIntervalEntry ::= SEQUENCE {
+      pwPerfIntervalNumber               Integer32,
+      pwPerfIntervalValidData            TruthValue,
+      pwPerfIntervalTimeElapsed          HCPerfTimeElapsed,
+      pwPerfIntervalInHCPackets          HCPerfIntervalCount,
+      pwPerfIntervalInHCBytes            HCPerfIntervalCount,
+      pwPerfIntervalOutHCPackets         HCPerfIntervalCount,
+      pwPerfIntervalOutHCBytes           HCPerfIntervalCount,
+      pwPerfIntervalInPackets            PerfIntervalCount,
+      pwPerfIntervalInBytes              PerfIntervalCount,
+      pwPerfIntervalOutPackets           PerfIntervalCount,
+      pwPerfIntervalOutBytes             PerfIntervalCount
+                        }
+
+pwPerfIntervalNumber OBJECT-TYPE
+   SYNTAX  Integer32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS  current
+   DESCRIPTION
+        "A number N, between 1 and 96, which identifies the
+         interval for which the set of statistics is available.
+         The interval identified by 1 is the most recently
+         completed 15-minute interval, and the interval identified
+         by N is the interval immediately preceding the one
+         identified by N-1.
+         The minimum range of N is 1 through 4.  The default range
+         is 1 to 32.  The maximum range of N is 1 through 96."
+   REFERENCE
+       "Tesink, K. 'Definitions of Managed Objects for the
+        SONET/SDH Interface Type', RFC 2558"
+   ::= { pwPerfIntervalEntry 1 }
+
+pwPerfIntervalValidData OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates if the data for this interval
+        is valid."
+   ::= { pwPerfIntervalEntry 2 }
+
+pwPerfIntervalTimeElapsed OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The duration of this interval in seconds."
+   ::= { pwPerfIntervalEntry 3 }
+
+pwPerfIntervalInHCPackets OBJECT-TYPE
+   SYNTAX        HCPerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of packets received by
+         the PW (from the PSN) during the interval.  This is the
+         64-bit version of pwPerfIntervalInPackets, if
+         pwPerfIntervalInHCPackets is supported according to the
+         rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 4 }
+
+pwPerfIntervalInHCBytes OBJECT-TYPE
+   SYNTAX        HCPerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of bytes received by the
+         PW (from the PSN) during the interval.
+         This is the 64-bit version of pwPerfIntervalInBytes, if
+         pwPerfIntervalInHCBytes is supported according to the
+         rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 5 }
+
+pwPerfIntervalOutHCPackets OBJECT-TYPE
+   SYNTAX        HCPerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of packets forwarded by
+         the PW (to the PSN) during the interval.
+         This is the 64-bit version of pwPerfIntervalOutPackets,
+         if pwPerfIntervalOutHCPackets is supported according to
+         the rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 6 }
+
+pwPerfIntervalOutHCBytes OBJECT-TYPE
+   SYNTAX        HCPerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for number of bytes forwarded by
+         the PW (to the PSN) during the interval.
+         This is the 64-bit version of pwPerfIntervalOutBytes,
+         if pwPerfIntervalOutHCBytes is supported according to
+         the rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 7 }
+
+pwPerfIntervalInPackets OBJECT-TYPE
+   SYNTAX        PerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value represents the number of packets received
+        by this PW during the interval.
+        It MUST be equal to the least significant 32 bits of
+        pwPerfIntervalInHCPackets, if pwPerfIntervalInHCPackets
+        is supported according to the rules spelled out in
+        RFC 2863."
+   ::= { pwPerfIntervalEntry 8 }
+
+pwPerfIntervalInBytes OBJECT-TYPE
+   SYNTAX        PerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This value represents the number of bytes received by
+        this PW during the interval.  It MUST be equal to the
+        least significant 32 bits of pwPerfIntervalInHCBytes, if
+        pwPerfIntervalInHCBytes is supported according to the
+        rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 9 }
+
+pwPerfIntervalOutPackets OBJECT-TYPE
+   SYNTAX        PerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value represents the number of packets sent by this
+        PW during the interval.
+        It MUST be equal to the least significant 32 bits of
+        pwPerfIntervalOutHCPackets, if
+        pwPerfIntervalOutHCPackets is supported according to the
+        rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 10 }
+
+pwPerfIntervalOutBytes OBJECT-TYPE
+   SYNTAX        PerfIntervalCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value represents the number of bytes sent by this
+        PW during the interval.
+        It MUST be equal to the least significant 32
+        bits of pwPerfIntervalOutHCBytes,
+        if pwPerfIntervalOutHCBytes is supported according to
+        the rules spelled out in RFC 2863."
+   ::= { pwPerfIntervalEntry 11 }
+
+-- End of the PW Performance Interval Table
+
+-- PW Performance 1-day Interval Table
+
+pwPerf1DayIntervalTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwPerf1DayIntervalEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table provides per-PW performance information for
+         the current day's measurement and the previous day's
+
+         interval."
+   ::= { pwObjects 5 }
+
+pwPerf1DayIntervalEntry OBJECT-TYPE
+   SYNTAX        PwPerf1DayIntervalEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is created by the agent for every
+         PW."
+   INDEX  { pwIndex, pwPerf1DayIntervalNumber }
+   ::= { pwPerf1DayIntervalTable 1 }
+
+PwPerf1DayIntervalEntry ::= SEQUENCE {
+      pwPerf1DayIntervalNumber               Unsigned32,
+      pwPerf1DayIntervalValidData            TruthValue,
+      pwPerf1DayIntervalTimeElapsed          HCPerfTimeElapsed,
+      pwPerf1DayIntervalInHCPackets          Counter64,
+      pwPerf1DayIntervalInHCBytes            Counter64,
+      pwPerf1DayIntervalOutHCPackets         Counter64,
+      pwPerf1DayIntervalOutHCBytes           Counter64
+      }
+
+pwPerf1DayIntervalNumber OBJECT-TYPE
+   SYNTAX      Unsigned32(1..31)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "History Data Interval number.  Interval 1 is the current day's
+      measurement period, interval 2 is the most recent previous
+      day, and interval 30 is 31 days ago.  Intervals 3..31 are
+      optional."
+   ::= { pwPerf1DayIntervalEntry 1 }
+
+pwPerf1DayIntervalValidData OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates if the data for this interval
+        is valid."
+   ::= { pwPerf1DayIntervalEntry 2 }
+
+pwPerf1DayIntervalTimeElapsed OBJECT-TYPE
+   SYNTAX       HCPerfTimeElapsed
+   UNITS        "seconds"
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+     "The number of seconds in the 1-day interval over which the
+      performance monitoring information is actually counted.
+      This value will be the same as the interval duration except
+      in a situation where performance monitoring data could not
+      be collected for any reason or where agent clock adjustments
+      have been made."
+   ::= { pwPerf1DayIntervalEntry 3 }
+
+pwPerf1DayIntervalInHCPackets OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for the total number of packets
+         received by the PW (from the PSN)."
+   ::= { pwPerf1DayIntervalEntry 4 }
+
+pwPerf1DayIntervalInHCBytes OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for the total number of bytes
+         received by the PW (from the PSN)."
+   ::= { pwPerf1DayIntervalEntry 5 }
+
+pwPerf1DayIntervalOutHCPackets OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for the total number of packets
+         forwarded by the PW (to the PSN)."
+   ::= { pwPerf1DayIntervalEntry 6 }
+
+pwPerf1DayIntervalOutHCBytes OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High-capacity counter for the total number of bytes
+         forwarded by the PW (to the PSN)."
+   ::= { pwPerf1DayIntervalEntry 7 }
+
+-- End of the PW Performance 1-day Interval Table
+
+-- Error counter scalar
+
+pwPerfTotalErrorPackets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Counter for number of errors at the PW processing level,
+         for example, packets received with unknown PW label."
+   ::= { pwObjects 6 }
+
+-- Reverse mapping tables
+
+-- The PW ID mapping table
+pwIndexMappingTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwIndexMappingEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table enables the reverse mapping of the unique
+         PWid parameters [peer IP, PW type, and PW ID] and the
+         pwIndex.  The table is not applicable for PWs created
+         manually or by using the generalized FEC."
+   ::= { pwObjects 7 }
+
+pwIndexMappingEntry OBJECT-TYPE
+   SYNTAX        PwIndexMappingEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table MUST be created by the agent for
+         every PW created by the pwTable for which pwOwner
+         equals pwIdFecSignaling and pwID is not zero.
+
+         Implementers need to be aware that if the value of
+         the pwIndexMappingPeerAddr (an OID) has more than
+         113 sub-identifiers, then OIDs of column instances
+         in this table will have more than 128 sub-identifiers
+         and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+   INDEX  { pwIndexMappingPwType, pwIndexMappingPwID,
+            pwIndexMappingPeerAddrType, pwIndexMappingPeerAddr
+            }
+   ::= { pwIndexMappingTable 1 }
+
+PwIndexMappingEntry ::= SEQUENCE {
+      pwIndexMappingPwType        IANAPwTypeTC,
+      pwIndexMappingPwID          PwIDType,
+      pwIndexMappingPeerAddrType  InetAddressType,
+      pwIndexMappingPeerAddr      InetAddress,
+      pwIndexMappingPwIndex       PwIndexType
+                       }
+
+pwIndexMappingPwType OBJECT-TYPE
+   SYNTAX        IANAPwTypeTC
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The PW type (indicates the service) of this PW."
+   ::= { pwIndexMappingEntry 1 }
+
+pwIndexMappingPwID OBJECT-TYPE
+   SYNTAX        PwIDType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The PW ID of this PW.  Zero if the PW is configured
+         manually."
+   ::= { pwIndexMappingEntry 2 }
+
+pwIndexMappingPeerAddrType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "IP address type of the peer node."
+   ::= { pwIndexMappingEntry 3 }
+
+pwIndexMappingPeerAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "IP address of the peer node."
+   ::= { pwIndexMappingEntry 4 }
+
+pwIndexMappingPwIndex  OBJECT-TYPE
+   SYNTAX        PwIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The value that represents the PW in the pwTable."
+   ::= { pwIndexMappingEntry 5 }
+
+-- End of the PW ID mapping table
+
+-- The peer mapping table
+
+pwPeerMappingTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwPeerMappingEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table provides reverse mapping of the existing PW
+         based on PW type and PW ID ordering.  This table is
+         typically useful for the element management system (EMS)
+         ordered query of existing PWs."
+   ::= { pwObjects 8 }
+
+pwPeerMappingEntry OBJECT-TYPE
+   SYNTAX        PwPeerMappingEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is created by the agent for every
+         PW entry in the pwTable.
+
+        Implementers need to be aware that if the value of the
+        pwPeerMappingPeerAddr (an OID) has more than 113
+        sub-identifiers, then OIDs of column instances in this
+        table will have more than 128 sub-identifiers and cannot
+        be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+   INDEX  { pwPeerMappingPeerAddrType, pwPeerMappingPeerAddr,
+            pwPeerMappingPwType,  pwPeerMappingPwID }
+   ::= { pwPeerMappingTable 1 }
+
+PwPeerMappingEntry ::= SEQUENCE {
+      pwPeerMappingPeerAddrType         InetAddressType,
+      pwPeerMappingPeerAddr             InetAddress,
+      pwPeerMappingPwType               IANAPwTypeTC,
+      pwPeerMappingPwID                 PwIDType,
+      pwPeerMappingPwIndex              PwIndexType
+                       }
+
+pwPeerMappingPeerAddrType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "IP address type of the peer node."
+   ::= { pwPeerMappingEntry 1 }
+
+pwPeerMappingPeerAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "IP address of the peer node."
+   ::= { pwPeerMappingEntry 2 }
+
+pwPeerMappingPwType OBJECT-TYPE
+   SYNTAX        IANAPwTypeTC
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The PW type (indicates the emulated service) of this PW."
+   ::= { pwPeerMappingEntry 3 }
+
+pwPeerMappingPwID OBJECT-TYPE
+   SYNTAX        PwIDType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The PW ID of this PW.  Zero if the PW is configured
+         manually."
+   ::= { pwPeerMappingEntry 4 }
+
+pwPeerMappingPwIndex  OBJECT-TYPE
+   SYNTAX        PwIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The value that represents the PW in the pwTable."
+   ::= { pwPeerMappingEntry 5 }
+
+-- End of the peer mapping table
+
+-- End of the reverse mapping tables
+
+pwUpDownNotifEnable  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "If this object is set to true(1), then it enables
+       the emission of pwUp and pwDown
+       notifications; otherwise, these notifications are not
+       emitted."
+   REFERENCE
+      "See also [RFC3413] for explanation that
+       notifications are under the ultimate control of the
+       MIB module in this document."
+   DEFVAL { false }
+   ::= { pwObjects 9 }
+
+pwDeletedNotifEnable  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "If this object is set to true(1), then it enables the
+       emission of pwDeleted notification; otherwise, this
+       notification is not emitted."
+   REFERENCE
+      "See also [RFC3413] for explanation that
+       notifications are under the ultimate control of the
+       MIB module in this document."
+   DEFVAL { false }
+   ::= { pwObjects 10 }
+
+pwNotifRate  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "This object defines the maximum number of PW notifications
+       that can be emitted from the device per second."
+   ::= { pwObjects 11 }
+
+-- The Gen Fec PW ID mapping table
+
+pwGenFecIndexMappingTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PwGenFecIndexMappingEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table enables the reverse mapping of the unique
+         PWid parameters [GroupAttachmentID, LocalAttachmentID,
+         and PeerAttachmentID] and the pwIndex.  The table is
+         only applicable for PW using the generalized FEC."
+   ::= { pwObjects 12 }
+
+pwGenFecIndexMappingEntry OBJECT-TYPE
+   SYNTAX        PwGenFecIndexMappingEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table MUST be created by the agent for
+         every PW created by the pwTable for which pwOwner
+         equals genFecSignaling.
+
+         Implementers need to be aware that if the combined value
+         of pwGenFecIndexMappingAGI, pwGenFecIndexMappingLocalAII,
+         and pwGenFecIndexMappingRemoteAII (OIDs) has more than
+         113 sub-identifiers, then OIDs of column instances
+         in this table will have more than 128 sub-identifiers
+         and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+   INDEX  { pwGenFecIndexMappingAGIType,
+            pwGenFecIndexMappingAGI,
+            pwGenFecIndexMappingLocalAIIType,
+            pwGenFecIndexMappingLocalAII,
+            pwGenFecIndexMappingRemoteAIIType,
+            pwGenFecIndexMappingRemoteAII
+            }
+   ::= { pwGenFecIndexMappingTable 1 }
+
+PwGenFecIndexMappingEntry ::= SEQUENCE {
+   pwGenFecIndexMappingAGIType        PwGenIdType,
+   pwGenFecIndexMappingAGI            PwAttachmentIdentifierType,
+   pwGenFecIndexMappingLocalAIIType   PwGenIdType,
+   pwGenFecIndexMappingLocalAII       PwAttachmentIdentifierType,
+   pwGenFecIndexMappingRemoteAIIType  PwGenIdType,
+   pwGenFecIndexMappingRemoteAII      PwAttachmentIdentifierType,
+   pwGenFecIndexMappingPwIndex        PwIndexType
+}
+
+pwGenFecIndexMappingAGIType OBJECT-TYPE
+   SYNTAX        PwGenIdType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This object is the type of the attachment
+         group identifier (AGI) that this PW belongs to."
+   ::= { pwGenFecIndexMappingEntry 1 }
+
+pwGenFecIndexMappingAGI OBJECT-TYPE
+   SYNTAX        PwAttachmentIdentifierType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This object is an octet string representing the attachment
+         group identifier (AGI) that this PW belongs to,
+         which typically identifies the VPN ID."
+   ::= { pwGenFecIndexMappingEntry 2 }
+
+pwGenFecIndexMappingLocalAIIType OBJECT-TYPE
+   SYNTAX        PwGenIdType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This object is the type of the local forwarder
+         attachment individual identifier (AII) to be used
+         by this PW."
+   ::= { pwGenFecIndexMappingEntry 3 }
+
+pwGenFecIndexMappingLocalAII OBJECT-TYPE
+   SYNTAX        PwAttachmentIdentifierType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This object is an octet string representing the local
+         forwarder attachment individual identifier (AII) to be used
+         by this PW.  It is used as the SAII for outgoing signaling
+         messages and the TAII in the incoming messages from the
+         peer."
+   ::= { pwGenFecIndexMappingEntry 4 }
+
+pwGenFecIndexMappingRemoteAIIType OBJECT-TYPE
+   SYNTAX        PwGenIdType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This object is the type of the remote forwarder
+         attachment individual identifier (AII) to be used
+         by this PW."
+   ::= { pwGenFecIndexMappingEntry 5 }
+
+pwGenFecIndexMappingRemoteAII OBJECT-TYPE
+   SYNTAX        PwAttachmentIdentifierType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This object is an octet string representing the peer
+         forwarder attachment individual identifier (AII) to be used
+         by this PW.  It is used as the TAII for outgoing signaling
+         messages and the SAII in the incoming messages from the
+         peer."
+   ::= { pwGenFecIndexMappingEntry 6 }
+
+pwGenFecIndexMappingPwIndex  OBJECT-TYPE
+   SYNTAX        PwIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The value that represents the PW in the pwTable."
+   ::= { pwGenFecIndexMappingEntry 7 }
+
+-- End of the Gen Fec PW ID mapping table
+
+-- Notifications - PW
+
+pwDown NOTIFICATION-TYPE
+   OBJECTS { pwOperStatus, --start of range
+             pwOperStatus  --end of range
+   }
+   STATUS  current
+   DESCRIPTION
+       "This notification is generated when the pwOperStatus
+        object for one or more contiguous entries in the pwTable are
+        about to enter the down(2) or lowerLayerDown(6) state from
+        any other state, except for transition from the
+        notPresent(5) state.  For the purpose of deciding when
+        these notifications occur, the lowerLayerDown(6) state
+        and the down(2) state are considered to be equivalent;
+        i.e., there is no notification on transition from
+        lowerLayerDown(6) into down(2), and there is a trap on
+        transition from any other state except down(2) (and
+        notPresent) into lowerLayerDown(6).
+
+        The included values of pwOperStatus MUST each be equal to
+        down(2) or lowerLayerDown(6).  The two instances of
+        pwOperStatus in this notification indicate the range of
+        indexes that are affected.  Note that all the indexes of
+        the two ends of the range can be derived from the
+        instance identifiers of these two objects.  For cases
+        where a contiguous range of cross-connects have
+        transitioned into the down(2) and lowerLayerDown(6) states
+        at roughly the same time, the device SHOULD issue a single
+        notification for each range of contiguous indexes in an
+        effort to minimize the emission of a large number of
+        notifications.  If a notification has to be issued for
+        just a single cross-connect entry, then the instance
+        identifier (and values) of the two pwOperStatus objects
+        MUST be identical."
+   ::= { pwNotifications  1 }
+
+pwUp NOTIFICATION-TYPE
+   OBJECTS { pwOperStatus, --start of range
+             pwOperStatus  --end of range
+   }
+   STATUS  current
+   DESCRIPTION
+       "This notification is generated when the pwOperStatus
+        object for one or more contiguous entries in the pwTable are
+        about to enter the up(1) state from some other state
+
+        except the notPresent(5) state and given that the pwDown
+        notification been issued for these entries.  The included
+        values of pwOperStatus MUST both be set equal to this
+        new state (i.e., up(1)).  The two instances of pwOperStatus
+        in this notification indicate the range of indexes that
+        are affected.  Note that all the indexes of the two ends
+        of the range can be derived from the instance identifiers
+        of these two objects.  For cases where a contiguous range
+        of cross-connects have transitioned into the up(1) state
+        at roughly the same time, the device SHOULD issue a single
+        notification for each range of contiguous indexes in an
+        effort to minimize the emission of a large number of
+        notifications.  If a notification has to be issued for
+        just a single cross-connect entry, then the instance
+        identifier (and values) of the two pwOperStatus objects
+        MUST be identical."
+   ::= { pwNotifications 2 }
+
+pwDeleted NOTIFICATION-TYPE
+   OBJECTS { pwType,
+             pwID,
+             pwPeerAddrType,
+             pwPeerAddr
+   }
+   STATUS  current
+   DESCRIPTION
+       "This notification is generated when the PW has been
+        deleted, i.e., when the pwRowStatus has been set to
+        destroy(6) or the PW has been deleted by a non-MIB
+        application or due to an auto-discovery process.
+       "
+   ::= { pwNotifications  3 }
+
+-- End of notifications.
+
+-- Conformance information
+
+pwGroups      OBJECT IDENTIFIER ::= { pwConformance   1 }
+pwCompliances OBJECT IDENTIFIER ::= { pwConformance   2 }
+
+-- Compliance requirement for fully compliant implementations
+
+pwModuleFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that provide full
+             support for the PW MIB module.  Such devices can
+             then be monitored and configured using
+
+             this MIB module."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { pwBasicGroup,
+                           pwPerformanceGeneralGroup
+                         }
+
+   GROUP pwNotificationGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that can efficiently implement the notifications
+                contained in this group.
+               "
+
+   GROUP        pwPwIdGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the PW ID FEC.
+               "
+
+   GROUP        pwGeneralizedFecGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the generalized PW FEC.
+               "
+
+   GROUP        pwFcsGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support FCS retention."
+
+   GROUP        pwFragGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW fragmentation.
+               "
+
+   GROUP        pwPwStatusGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW status notification.
+               "
+
+   GROUP        pwGetNextGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                where the pwIndex may be any arbitrary value
+                and the EMS would require retrieval of the next
+                free index."
+
+   GROUP        pwPriorityGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the controlling the PW setup and
+                holding priority."
+
+   GROUP        pwAttachmentGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support attachment of two PWs (PW stitching)."
+
+   GROUP        pwPeformance1DayIntervalGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW performance gathering in 1-day
+                intervals."
+
+   GROUP        pwPerformanceIntervalGeneralGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW performance gathering in 15-
+                minute intervals."
+
+   GROUP        pwPeformanceIntervalGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW performance gathering in 15-
+                minute intervals."
+
+   GROUP        pwHCPeformanceIntervalGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                where at least one of the interval performance
+                counters wraps around too quickly based on the
+                criteria specified in RFC 2863 for high-capacity
+                counters."
+
+   GROUP        pwMappingTablesGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support reverse mapping of PW indexes to
+                the pwIndex and the peer mapping table."
+
+   GROUP        pwSignalingGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the PW signaling."
+
+   GROUP        pwNotificationControlGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the PW notifications."
+
+   OBJECT       pwAdminStatus
+   SYNTAX       INTEGER { up(1), down(2) }
+   DESCRIPTION "Support of the value testing(3) is not
+                required."
+
+   OBJECT       pwOperStatus
+   SYNTAX       INTEGER { up(1), down(2), notPresent(5),
+                lowerLayerDown(6) }
+   DESCRIPTION "Support of the values testing(3) and dormant(4)
+
+                is not required."
+
+   OBJECT       pwRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2),
+                            notReady(3) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait is not required.  Support
+                of notReady is not required for implementations
+                that do not support signaling, or if it is
+                guaranteed that the conceptual row has all the
+                required information to create the PW when the
+                row has been created by the agent or written by
+                the operator."
+
+   OBJECT       pwPeerAddrType
+   SYNTAX       InetAddressType { unknown(0), ipv4(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Only unknown(0) and ipv4(1) are required.
+                Implementations that support only IPv4 MAY support
+                read-only access."
+
+   OBJECT       pwPeerAddr
+   SYNTAX       InetAddress (SIZE(0|4))
+   DESCRIPTION "An implementation is only required to support
+                0, 4 address sizes."
+
+   OBJECT       pwStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwNotifRate
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+     ::= { pwCompliances 1 }
+
+-- Compliance requirement for read-only compliant implementations
+
+pwModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for agents that provide read-
+             only support for the PW MIB module.  Such devices can
+             then be monitored but cannot be configured using this
+             MIB module."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { pwBasicGroup
+                         }
+
+   GROUP        pwNotificationGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that can efficiently implement the notifications
+                contained in this group."
+
+   GROUP        pwPwIdGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the PW ID FEC.
+               "
+
+   GROUP        pwGeneralizedFecGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the generalized PW FEC.
+               "
+
+   GROUP        pwFcsGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support FCS retention."
+
+   GROUP        pwFragGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW fragmentation.
+               "
+
+   GROUP        pwPwStatusGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW status notification.
+               "
+
+   GROUP        pwGetNextGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                where the pwIndex may be any arbitrary value
+                and the EMS would require retrieval of the next
+                free index."
+
+   GROUP        pwPriorityGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the controlling the PW setup and
+                holding priority."
+
+   GROUP        pwAttachmentGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support attachment of two PWs (PW stitching)."
+
+   GROUP        pwPeformance1DayIntervalGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW performance gathering in 1-day
+                intervals."
+
+   GROUP        pwPerformanceIntervalGeneralGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW performance gathering in 15-
+                minute intervals."
+
+   GROUP        pwPeformanceIntervalGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support PW performance gathering in 15-
+                minute intervals."
+
+   GROUP        pwHCPeformanceIntervalGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                where at least one of the interval performance
+                counters wraps around too quickly based on the
+                criteria specified in RFC 2863 for high-capacity
+                counters."
+
+   GROUP        pwMappingTablesGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support reverse mapping of PW indexes to
+                the pwIndex and the peer mapping table."
+
+   GROUP        pwSignalingGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the PW signaling."
+
+   GROUP        pwNotificationControlGroup
+   DESCRIPTION "This group is only mandatory for implementations
+                that support the PW notifications."
+
+   OBJECT       pwType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwOwner
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwPsnType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwSetUpPriority
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwHoldingPriority
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwPeerAddrType
+   SYNTAX       InetAddressType { unknown(0), ipv4(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  Only unknown(0) and
+                ipv4(1) are required."
+
+   OBJECT       pwPeerAddr
+   SYNTAX       InetAddress (SIZE(0|4))
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  An implementation
+                is only required to support 0, 4 address sizes."
+
+   OBJECT       pwAttachedPwIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwIfIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwID
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwLocalGroupID
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwGroupAttachmentID
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwLocalAttachmentID
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwRemoteAttachmentID
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwCwPreference
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwLocalIfMtu
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwLocalIfString
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwLocalCapabAdvert
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwFragmentCfgSize
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwFcsRetentionCfg
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwOutboundLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwInboundLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwName
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwDescr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwAdminStatus
+   SYNTAX       INTEGER { up(1), down(2) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  The support of value
+                testing(3) is not required."
+
+   OBJECT       pwOperStatus
+   SYNTAX       INTEGER { up(1), down(2), notPresent(5),
+                lowerLayerDown(6) }
+   DESCRIPTION "The support of the values testing(3) and dormant(4)
+                is not required."
+
+   OBJECT       pwRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwOamEnable
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwGenAGIType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwGenLocalAIIType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwGenRemoteAIIType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwUpDownNotifEnable
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwDeletedNotifEnable
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       pwNotifRate
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+     ::= { pwCompliances 2 }
+
+-- Units of conformance.
+
+pwBasicGroup   OBJECT-GROUP
+   OBJECTS {
+            pwType,
+            pwOwner,
+            pwPsnType,
+            pwIfIndex,
+            pwCwPreference,
+            pwLocalIfMtu,
+            pwOutboundLabel,
+            pwInboundLabel,
+            pwName,
+            pwDescr,
+            pwCreateTime,
+            pwUpTime,
+            pwLastChange,
+            pwAdminStatus,
+            pwOperStatus,
+            pwLocalStatus,
+            pwRowStatus,
+            pwStorageType,
+            pwOamEnable
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects that are required in all
+        implementations that support the PW MIB module."
+   ::= { pwGroups 1 }
+
+pwPwIdGroup   OBJECT-GROUP
+   OBJECTS {
+            pwID
+           }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects required for PW ID configuration
+        and signaling."
+   ::= { pwGroups 2 }
+
+pwGeneralizedFecGroup   OBJECT-GROUP
+   OBJECTS {
+            pwGroupAttachmentID,
+            pwLocalAttachmentID,
+            pwRemoteAttachmentID,
+            pwGenAGIType,
+            pwGenLocalAIIType,
+            pwGenRemoteAIIType
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects required for generalized FEC
+
+        configuration and signaling."
+   ::= { pwGroups 3 }
+
+pwFcsGroup   OBJECT-GROUP
+   OBJECTS {
+            pwFcsRetentionCfg,
+            pwFcsRetentionStatus
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects required for FCS retention
+        configuration and signaling."
+   ::= { pwGroups 4 }
+
+pwFragGroup   OBJECT-GROUP
+   OBJECTS {
+            pwFragmentCfgSize,
+            pwRmtFragCapability
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects required for fragmentation
+        configuration and signaling."
+   ::= { pwGroups 5 }
+
+pwPwStatusGroup   OBJECT-GROUP
+   OBJECTS {
+            pwRemoteCapabilities,
+            pwRemoteStatusCapable,
+            pwRemoteStatus
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects required for PW status configuration
+        and signaling."
+   ::= { pwGroups 6 }
+
+pwGetNextGroup   OBJECT-GROUP
+   OBJECTS {
+            pwIndexNext
+            }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects for getting the next available
+
+        index."
+   ::= { pwGroups 7 }
+
+pwPriorityGroup   OBJECT-GROUP
+   OBJECTS {
+            pwSetUpPriority,
+            pwHoldingPriority
+            }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects for controlling the PW setup and
+        holding priority."
+   ::= { pwGroups 8 }
+
+pwAttachmentGroup   OBJECT-GROUP
+   OBJECTS {
+            pwAttachedPwIndex
+            }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects for PW configuration as ifIndex."
+   ::= { pwGroups 9 }
+
+pwPerformanceGeneralGroup OBJECT-GROUP
+   OBJECTS {
+            pwPerfTotalErrorPackets
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of general objects needed for managing the
+        total running performance parameters."
+   ::= { pwGroups 10 }
+
+pwPeformance1DayIntervalGroup OBJECT-GROUP
+   OBJECTS {
+            pwPerf1DayIntervalValidData,
+            pwPerf1DayIntervalTimeElapsed,
+            pwPerf1DayIntervalInHCPackets,
+            pwPerf1DayIntervalInHCBytes,
+            pwPerf1DayIntervalOutHCPackets,
+            pwPerf1DayIntervalOutHCBytes
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects needed for a PW running 1-day
+
+        interval performance collection."
+   ::= { pwGroups 11 }
+
+pwPerformanceIntervalGeneralGroup OBJECT-GROUP
+   OBJECTS {
+            pwTimeElapsed,
+            pwValidIntervals,
+            pwPerfIntervalValidData,
+            pwPerfIntervalTimeElapsed
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of general objects needed for managing the
+        interval performance parameters."
+   ::= { pwGroups 12 }
+
+pwPeformanceIntervalGroup OBJECT-GROUP
+   OBJECTS {
+            pwPerfCurrentInPackets,
+            pwPerfCurrentInBytes,
+            pwPerfCurrentOutPackets,
+            pwPerfCurrentOutBytes,
+            pwPerfIntervalInPackets,
+            pwPerfIntervalInBytes,
+            pwPerfIntervalOutPackets,
+            pwPerfIntervalOutBytes
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of 32-bit objects needed for PW performance
+        collection in 15-minute intervals."
+   ::= { pwGroups 13 }
+
+pwHCPeformanceIntervalGroup OBJECT-GROUP
+   OBJECTS {
+            pwPerfCurrentInHCPackets,
+            pwPerfCurrentInHCBytes,
+            pwPerfCurrentOutHCPackets,
+            pwPerfCurrentOutHCBytes,
+            pwPerfIntervalInHCPackets,
+            pwPerfIntervalInHCBytes,
+            pwPerfIntervalOutHCPackets,
+            pwPerfIntervalOutHCBytes
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of HC objects needed for PW performance
+        collection in 15-minute intervals."
+   ::= { pwGroups 14 }
+
+pwMappingTablesGroup OBJECT-GROUP
+   OBJECTS {
+            pwIndexMappingPwIndex,
+            pwPeerMappingPwIndex,
+            pwGenFecIndexMappingPwIndex
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects contained in the reverse
+        mapping tables."
+   ::= { pwGroups 15 }
+
+pwNotificationControlGroup OBJECT-GROUP
+   OBJECTS {
+            pwUpDownNotifEnable,
+            pwDeletedNotifEnable,
+            pwNotifRate
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects for controlling the PW
+        notifications."
+   ::= { pwGroups 16 }
+
+pwNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+            pwUp,
+            pwDown,
+            pwDeleted
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of PW notifications objects."
+   ::= { pwGroups 17 }
+
+pwSignalingGroup OBJECT-GROUP
+   OBJECTS {
+            pwPeerAddrType,
+            pwPeerAddr,
+            pwLocalGroupID,
+            pwLocalIfString,
+            pwLocalCapabAdvert,
+            pwRemoteGroupID,
+            pwCwStatus,
+            pwRemoteIfMtu,
+            pwRemoteIfString
+          }
+   STATUS  current
+   DESCRIPTION
+       "Collection of objects for use in implementations that
+        support the PW signaling."
+   ::= { pwGroups 18 }
+
+END
diff --git a/snmp_builder/mibs/PW-TC-STD-MIB.mib b/snmp_builder/mibs/PW-TC-STD-MIB.mib
new file mode 100644
index 0000000..50ff7a3
--- /dev/null
+++ b/snmp_builder/mibs/PW-TC-STD-MIB.mib
@@ -0,0 +1,288 @@
+PW-TC-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, Unsigned32, mib-2
+      FROM SNMPv2-SMI               -- [RFC2578]
+
+   TEXTUAL-CONVENTION
+      FROM SNMPv2-TC;               -- [RFC2579]
+
+pwTcStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200904210000Z"  -- 21 April 2009 00:00:00 GMT
+   ORGANIZATION "Pseudowire Edge-to-Edge Emulation (PWE3) Working
+                 Group"
+   CONTACT-INFO
+   " Thomas D. Nadeau
+     Email:  tom.nadeau@bt.com
+
+     David Zelig
+     Email: davidz@oversi.com
+
+     Orly Nicklass
+     Email: orlyn@radvision.com
+
+     The PWE3 Working Group (email distribution pwe3@ietf.org,
+     http://www.ietf.org/html.charters/pwe3-charter.html)
+    "
+   DESCRIPTION
+      "This MIB module defines TEXTUAL-CONVENTIONS
+      for concepts used in pseudowire edge-to-edge
+      networks.
+
+      Copyright (c) 2009 IETF Trust and the persons identified
+      as authors of the code.  All rights reserved.
+
+      Redistribution and use in source and binary forms, with or
+      without modification, are permitted provided that the following
+      conditions are met:
+
+      - Redistributions of source code must retain the above
+        copyright notice, this list of conditions and the following
+        disclaimer.
+
+      - Redistributions in binary form must reproduce the above
+        copyright notice, this list of conditions and the following
+        disclaimer in the documentation and/or other materials
+        provided with the distribution.
+
+      - Neither the name of Internet Society, IETF or IETF Trust, nor
+        the names of specific contributors, may be used to endorse or
+        promote products derived from this software without specific
+        prior written permission.
+
+      THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+      CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+      INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+      MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+      DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+      CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+      SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+      NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+      LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+      HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+      CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+      OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+      EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+      This version of this MIB module is part of RFC 5542;
+      see the RFC itself for full legal notices."
+
+   -- Revision history.
+
+   REVISION "200904210000Z"  -- 21 April 2009 00:00:00 GMT
+   DESCRIPTION
+        "Original Version"
+      ::= { mib-2 188 }
+
+PwGroupID ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS      current
+   DESCRIPTION
+        "An administrative identification for grouping a
+         set of service-specific pseudowire services."
+   SYNTAX  Unsigned32
+
+PwIDType ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS      current
+   DESCRIPTION
+        "Pseudowire Identifier.  Used to identify the PW
+         (together with some other fields) in the signaling
+         session."
+   SYNTAX  Unsigned32
+
+PwIndexType ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS      current
+   DESCRIPTION
+        "Pseudowire Index.  A unique value, greater than zero,
+        for each locally defined PW.  Used for indexing
+        several MIB tables associated with the particular PW.
+        It is recommended that values are assigned contiguously
+        starting from 1.  The value for each PW MUST remain
+        constant at least from one re-initialization
+        to the next re-initialization."
+   SYNTAX  Unsigned32 (1..4294967295)
+
+PwIndexOrZeroType ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS      current
+   DESCRIPTION
+        "This TEXTUAL-CONVENTION is an extension of the
+         PwIndexType convention.  The latter defines a greater-
+         than-zero value used to identify a pseudowire
+         in the managed system.  This extension permits the
+         additional value of zero.  The zero value is object-specific
+         and MUST therefore be defined as part of the description of
+         any object that uses this syntax.  Examples of the usage of
+         zero might include situations where pseudowire was unknown,
+         or where none or all pseudowires need to be referenced."
+    SYNTAX  Unsigned32 (0..4294967295)
+
+PwOperStatusTC ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+     "Indicates the operational status of the PW.
+
+     - up(1):             Ready to pass packets.
+     - down(2):           PW signaling is not yet finished, or
+                          indications available at the service
+                          level indicate that the PW is not
+                          passing packets.
+     - testing(3):        AdminStatus at the PW level is set to
+                          test.
+
+     - dormant(4):        The PW is not in a condition to pass
+                          packets but is in a 'pending' state,
+                          waiting for some external event.
+     - notPresent(5):     Some component is missing to accomplish
+                          the setup of the PW.  It can be
+                          configuration error, incomplete
+                          configuration, or a missing H/W component.
+     - lowerLayerDown(6): One or more of the lower-layer interfaces
+                          responsible for running the underlying PSN
+                          is not in OperStatus 'up' state."
+ SYNTAX   INTEGER {
+     up(1),
+     down(2),
+     testing(3),
+     dormant(4),
+     notPresent(5),
+     lowerLayerDown(6)
+     }
+
+PwAttachmentIdentifierType ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "An octet string used in the generalized Forward Error
+       Correction (FEC) element for identifying attachment forwarder
+       and groups.  A NULL identifier is of zero length.
+      "
+  SYNTAX    OCTET STRING (SIZE (0..255))
+
+PwGenIdType ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Represents the Attachment Group Identifier (AGI) Type and
+       Attachment Individual Identifier (AII) Type in generalized FEC
+       signaling and configuration.
+      "
+  SYNTAX    Unsigned32( 0..254 )
+
+PwCwStatusTC ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Indicates the status of the control word (CW) negotiation
+       based on the local configuration and the indications received
+       from the peer node.
+
+       waitingForNextMsg(1) indicates that the node is waiting for
+       another label mapping from the peer.
+
+       sentWrongBitErrorCode(2) indicates that the local node has
+       notified the peer about a mismatch in the C-bit.
+
+       rxWithdrawWithWrongBitErrorCode(3) indicates that a withdraw
+       message has been received with the wrong C-bit error code.
+
+       illegalReceivedBit(4) indicates a C-bit configuration with
+       the peer that is not compatible with the PW type.
+
+       cwPresent(5) indicates that the CW is present for this PW.
+       If signaling is used, the C-bit is set and agreed upon between
+       the nodes.  For manually configured PW, the local
+       configuration requires the use of the CW.
+
+       cwNotPresent(6) indicates that the CW is not present for this
+       PW.  If signaling is used, the C-bit is reset and agreed upon
+       between the nodes.  For manually configured PW, the local
+       configuration requires that the CW not be used.
+
+       notYetKnown(7) indicates that a label mapping has not yet
+       been received from the peer.
+      "
+   REFERENCE
+      "Martini, et al., 'Pseudowire Setup and Maintenance Using
+       the Label Distribution Protocol', [RFC4447]."
+   SYNTAX    INTEGER {
+              waitingForNextMsg(1),
+              sentWrongBitErrorCode(2),
+              rxWithdrawWithWrongBitErrorCode(3),
+              illegalReceivedBit(4),
+              cwPresent(5),
+              cwNotPresent(6),
+              notYetKnown(7)
+              }
+
+PwStatus ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Indicates the status of the PW and the interfaces affecting
+       this PW.  If none of the bits are set, it indicates no faults
+       are reported.
+      "
+   SYNTAX   BITS {
+     pwNotForwarding(0),
+     servicePwRxFault(1),
+     servicePwTxFault(2),
+     psnPwRxFault(3),
+     psnPwTxFault(4)
+     }
+
+PwFragSize ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS      current
+   DESCRIPTION
+      "If set to a value other than zero, it indicates the desired
+       fragmentation length in bytes.  If set to zero,
+       fragmentation is not desired for PSN bound packets.
+      "
+   SYNTAX   Unsigned32
+
+PwFragStatus ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Indicates the status of the fragmentation/reassembly process
+       based on local configuration and peer capability.
+
+       noFrag(0) bit indicates that local configuration is for no
+       fragmentation.
+
+       cfgFragGreaterThanPsnMtu(1) bit indicates that the local node
+       is set to fragment, but the fragmentation size is greater
+       than the MTU available at the PSN between the nodes.
+       Fragmentation is not done in this case.
+
+       cfgFragButRemoteIncapable(2) bit indicates that the local
+       configuration conveys the desire for fragmentation but
+       the peer is not capable of reassembly.
+
+       remoteFragCapable(3) bit indicates that the remote node
+       is capable to accept fragmented PDUs.
+
+       fragEnabled(4) bit indicates that fragmentation will be used
+       on this PW.  Fragmentation can be used if the local node was
+       configured for fragmentation, the peer has the capability
+       to accept fragmented packets, and the CW is in use for this
+       PW."
+   REFERENCE
+       "Malis, A. and M. Townsley, 'Pseudowire Emulation Edge-to-
+        Edge (PWE3) Fragmentation and Reassembly', [RFC4623]."
+   SYNTAX   BITS {
+      noFrag(0),
+      cfgFragGreaterThanPsnMtu(1),
+      cfgFragButRemoteIncapable(2),
+      remoteFragCapable(3),
+      fragEnabled(4)
+      }
+
+PwCfgIndexOrzero ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS      current
+   DESCRIPTION
+        "Index in any of the relevant configuration tables for
+        supplement information regarding configuration of the
+        specific technology.  Value zero implies no additional
+        configuration information is applicable."
+   SYNTAX  Unsigned32 (0..4294967295)
+END
diff --git a/snmp_builder/mibs/PW-TDM-MIB.mib b/snmp_builder/mibs/PW-TDM-MIB.mib
new file mode 100644
index 0000000..bd1461e
--- /dev/null
+++ b/snmp_builder/mibs/PW-TDM-MIB.mib
@@ -0,0 +1,1336 @@
+PW-TDM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE,
+  Integer32, Counter32, Unsigned32, mib-2
+     FROM SNMPv2-SMI
+
+  MODULE-COMPLIANCE, OBJECT-GROUP
+     FROM SNMPv2-CONF
+
+  TEXTUAL-CONVENTION, TruthValue,  RowStatus, StorageType,
+   TimeStamp
+     FROM SNMPv2-TC
+
+  InterfaceIndexOrZero
+     FROM IF-MIB                 -- [IFMIB]
+
+  SnmpAdminString
+     FROM SNMP-FRAMEWORK-MIB     -- [RFC3411]
+
+  PerfCurrentCount, PerfIntervalCount
+     FROM PerfHist-TC-MIB
+
+  pwIndex
+     FROM PW-STD-MIB
+
+  PwCfgIndexOrzero
+     FROM PW-TC-STD-MIB;
+
+-- The TDM MIB
+
+  pwTDMMIB MODULE-IDENTITY
+
+  LAST-UPDATED "200906150000Z"
+  ORGANIZATION "Pseudo-Wire Emulation Edge-to-Edge (PWE3)
+                Working Group"
+  CONTACT-INFO
+      "        Orly Nicklass
+       Postal: RADVISION Ltd.
+               24Raul Wallenberg St.
+               Tel Aviv, Israel
+               Email: orlyn@radvision.com
+
+       The PWE3 Working Group (email distribution pwe3@ietf.org,
+       http://www.ietf.org/html.charters/pwe3-charter.html)
+       "
+  DESCRIPTION
+      "This MIB contains managed object definitions for
+       encapsulating TDM (T1,E1, T3, E3, NxDS0) as
+       pseudo-wires over packet-switching networks (PSN).
+
+       This MIB supplements the PW-STD-MIB as in: Zelig, D.,
+       Nadeau, T. 'Pseudowire (PW) Management Information Base'.
+       The PW-STD-MIB contains structures and MIB associations
+       generic to pseudowire (PW) emulation.  PW-specific
+       MIBs (such as this) contain config and stats for specific
+       PW types.
+
+       Copyright (c) 2009 IETF Trust and the persons identified as
+       authors of the code.  All rights reserved.
+
+       Redistribution and use in source and binary forms, with or
+       without modification, are permitted provided that the
+       following conditions are met:
+
+       - Redistributions of source code must retain the above
+         copyright notice, this list of conditions and the
+         following disclaimer.
+
+       - Redistributions in binary form must reproduce the above
+         copyright notice, this list of conditions and the following
+         disclaimer in the documentation and/or other materials
+         provided with the distribution.
+
+       - Neither the name of Internet Society, IETF or IETF Trust,
+         nor the names of specific contributors, may be used to
+         endorse or promote products derived from this software
+         without specific prior written permission.
+
+       THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+       CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+       INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+       MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+       DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+       CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+       SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+       NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+       LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+       HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+       CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+       OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+       SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+       This version of this MIB module is part of RFC 5604;
+
+       see the RFC itself for full legal notices.
+       "
+
+  REVISION  "200906150000Z"
+  DESCRIPTION
+      "Initial version published as part of RFC 5604."
+  ::= { mib-2 186 }
+
+-- Local Textual conventions
+
+   PwTDMCfgIndex ::= TEXTUAL-CONVENTION
+     STATUS      current
+     DESCRIPTION
+          "Index into the relevant pwXXXCfgTable."
+     SYNTAX Unsigned32 (1..4294967295)
+
+-- Notifications
+pwTDMNotifications OBJECT IDENTIFIER
+                             ::= { pwTDMMIB 0 }
+-- Tables, Scalars
+pwTDMObjects       OBJECT IDENTIFIER
+                             ::= { pwTDMMIB 1 }
+-- Conformance
+pwTDMConformance   OBJECT IDENTIFIER
+                             ::= { pwTDMMIB 2 }
+
+-- TDM PW table
+
+pwTDMTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwTDMEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "This table contains basic information including the
+       ifIndex and pointers to entries in the relevant TDM
+       config tables for this TDM PW."
+  ::= { pwTDMObjects 1 }
+
+pwTDMEntry OBJECT-TYPE
+  SYNTAX        PwTDMEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "This table is indexed by the same index that was
+       created for the associated entry in the PW Table
+       (in the PW-STD-MIB).
+
+         - The PwIndex.
+
+       An entry is created in this table by the agent for every
+       entry in the pwTable with a pwType equal to one of the
+       following:
+       e1Satop(17), t1Satop(18), e3Satop(19), t3Satop(20),
+       basicCesPsn(21), basicTdmIp(22), tdmCasCesPsn(23),
+       or tdmCasTdmIp(24).
+       Unless otherwise specified, all writeable objects in this
+       table MUST NOT be changed after row activation in the
+       generic pwTable (see [PWMIB]) and values must persist
+       after reboot."
+  INDEX  { pwIndex }
+     ::= { pwTDMTable 1 }
+
+PwTDMEntry ::= SEQUENCE {
+
+     pwTDMRate                      Integer32,
+     pwTDMIfIndex                   InterfaceIndexOrZero,
+     pwGenTDMCfgIndex               PwCfgIndexOrzero,
+     pwRelTDMCfgIndex               PwCfgIndexOrzero,
+     pwTDMConfigError               BITS,
+     pwTDMTimeElapsed               Integer32,
+     pwTDMValidIntervals            Integer32,
+     pwTDMValidDayIntervals         Integer32,
+     pwTDMLastEsTimeStamp           TimeStamp
+     }
+
+pwTDMRate OBJECT-TYPE
+  SYNTAX     Integer32
+  MAX-ACCESS    read-write
+  STATUS        current
+  DESCRIPTION
+      "The parameter represents the bit-rate of the TDM service
+       in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT].
+       It complements the definition of pwType used in
+       PW-STD-MIB.
+       For structure-agnostic mode, the following should be used:
+       a) (Structure-Agnostic TDM over Packet) Satop E1 - 32
+       b) Satop T1 emulation:
+          i)   MUST be set to 24 in the basic emulation mode
+          ii)  MUST be set to 25 for the 'Octet-aligned T1'
+               emulation mode
+       c) Satop E3 - 535
+       d) Satop T3 - 699
+       For all kinds of structure-aware emulation, this parameter
+       MUST be set to N where N is the number of DS0 channels
+
+       in the corresponding attachment circuit."
+  REFERENCE
+   "TDMCP-EXT"
+  DEFVAL { 32 }
+  ::= { pwTDMEntry 1 }
+
+pwTDMIfIndex OBJECT-TYPE
+  SYNTAX        InterfaceIndexOrZero
+  MAX-ACCESS    read-write
+  STATUS        current
+  DESCRIPTION
+      "This is a unique index within the ifTable.  It represents
+       the interface index of the full link or the interface
+       index for the bundle holding the group of
+       time slots to be transmitted via this PW connection.
+
+       A value of zero indicates an interface index that has yet
+       to be determined.
+       Once set, if the TDM ifIndex is (for some reason) later
+       removed, the agent SHOULD delete the associated PW rows
+       (e.g., this pwTDMTable entry).  If the agent does not
+       delete the rows, the agent MUST set this object to
+       zero."
+  ::= { pwTDMEntry 2 }
+
+pwGenTDMCfgIndex OBJECT-TYPE
+  SYNTAX        PwCfgIndexOrzero
+  MAX-ACCESS    read-write
+  STATUS        current
+  DESCRIPTION
+      "Index to the generic parameters in the TDM configuration
+       table that appears in this MIB module.  It is likely that
+       multiple TDM PWs of the same characteristic will share
+       a single TDM Cfg entry."
+  ::= { pwTDMEntry 3 }
+
+pwRelTDMCfgIndex OBJECT-TYPE
+  SYNTAX        PwCfgIndexOrzero
+  MAX-ACCESS    read-write
+  STATUS        current
+  DESCRIPTION
+      "Index to the relevant TDM configuration table entry
+       that appears in one of the related MIB modules
+       such as TDMoIP or CESoPSN.  It is likely that
+       multiple TDM PWs of the same characteristic will share
+       a single configuration entry of the relevant type.
+       The value 0 implies no entry in other related MIBs."
+  ::= { pwTDMEntry 4 }
+
+pwTDMConfigError OBJECT-TYPE
+  SYNTAX BITS {
+        notApplicable                 ( 0),
+        tdmTypeIncompatible           ( 1),
+        peerRtpIncompatible           ( 2),
+        peerPayloadSizeIncompatible   ( 3)
+        }
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Any of the bits are set if the local configuration is
+       not compatible with the peer configuration as available
+       from the various parameters options.  Setting is done based
+       on signaling, or else value (0) will be set.
+
+       -tdmTypeIncompatible bit is set if the local configuration
+       is not carrying the same TDM type as the peer configuration.
+
+       -peerRtpIncompatible bit is set if the local configuration
+       is configured to send RTP packets for this PW, and the
+       remote is not capable of accepting RTP packets.
+
+       -peerPayloadSizeIncompatible bit is set if the local
+       configuration is not carrying the same Payload Size as the
+       peer configuration."
+  ::= { pwTDMEntry 5}
+
+pwTDMTimeElapsed OBJECT-TYPE
+   SYNTAX  Integer32 (1..900)
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The number of seconds, including partial seconds,
+        that have elapsed since the beginning of the current
+        measurement period.  If, for some reason, such as an
+        adjustment in the system's time-of-day clock, the
+        current interval exceeds the maximum value, the
+        agent will return the maximum value."
+   ::= { pwTDMEntry 6}
+
+pwTDMValidIntervals OBJECT-TYPE
+   SYNTAX  Integer32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The number of previous 15-minute intervals for which data
+        was collected.
+        An agent with TDM capability must be capable of supporting
+        at least n intervals.  The minimum value of n is 4.  The
+        default of n is 32 and the maximum value of n is 96.
+        The value will be n unless the measurement was (re-)
+        started within the last (n*15) minutes, in which case,
+        the value will be the number of complete 15-minute
+        intervals for which the agent has at least some data.
+        In certain cases (e.g., in the case where the agent is
+        a proxy), it is possible that some intervals are unavailable.
+        In this case, this interval is the maximum interval number
+        for which data is available."
+   ::= { pwTDMEntry 7}
+
+pwTDMValidDayIntervals OBJECT-TYPE
+   SYNTAX  Integer32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The number of previous days for which data
+        was collected.
+        An agent with TDM capability must be capable of supporting
+        at least n intervals.  The minimum value of n is 1.  The
+        default of n is 1 and the maximum value of n is 30."
+   ::= { pwTDMEntry 8}
+
+pwTDMLastEsTimeStamp OBJECT-TYPE
+  SYNTAX      TimeStamp
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+      "The value of sysUpTime at the most recent occasion at
+       which the TDM PW entered the ES or SES state."
+  ::= { pwTDMEntry 11}
+
+-- End of TDM PW table
+
+-- PW Generic TDM PW Configuration Table
+
+pwTDMCfgIndexNext OBJECT-TYPE
+  SYNTAX            Unsigned32
+  MAX-ACCESS        read-only
+  STATUS            current
+  DESCRIPTION
+      "This object contains the value to be used for
+       pwTDMCfgIndex when creating entries in the
+       pwTDMCfgTable.  The value 0 indicates that no
+       unassigned entries are available.  To obtain the
+       value of pwTDMCfgIndexNext for a new entry in the
+       pwTDMCfgTable, the manager issues a management
+       protocol retrieval operation.  The agent will
+       determine through its local policy when this
+       index value will be made available for reuse."
+  ::= { pwTDMObjects 2 }
+
+pwTDMCfgTable   OBJECT-TYPE
+  SYNTAX                  SEQUENCE OF PwTDMCfgEntry
+  MAX-ACCESS              not-accessible
+  STATUS                  current
+  DESCRIPTION
+      "This table contains a set of parameters that may be
+       referenced by one or more TDM PWs in pwTDMTable."
+  ::= { pwTDMObjects 3 }
+
+pwTDMCfgEntry  OBJECT-TYPE
+    SYNTAX            PwTDMCfgEntry
+    MAX-ACCESS        not-accessible
+    STATUS            current
+    DESCRIPTION
+        "These parameters define the characteristics of a
+         TDM PW.  They are grouped here to ease NMS burden.
+         Once an entry is created here it may be re-used
+         by many PWs.
+         Unless otherwise specified, all objects in this table
+         MUST NOT be changed after row activation (see [PWMIB])."
+  INDEX  { pwTDMCfgIndex }
+     ::= { pwTDMCfgTable 1 }
+
+PwTDMCfgEntry ::= SEQUENCE {
+     pwTDMCfgIndex                    PwTDMCfgIndex,
+     pwTDMCfgRowStatus                RowStatus,
+     pwTDMCfgPayloadSize              Unsigned32,
+     pwTDMCfgPktReorder               TruthValue,
+     pwTDMCfgRtpHdrUsed               TruthValue,
+     pwTDMCfgJtrBfrDepth              Unsigned32,
+     pwTDMCfgPayloadSuppression       INTEGER,
+     pwTDMCfgConsecPktsInSynch        Unsigned32,
+     pwTDMCfgConsecMissPktsOutSynch   Unsigned32,
+     pwTDMCfgSetUp2SynchTimeOut       Unsigned32,
+     pwTDMCfgPktReplacePolicy         INTEGER,
+     pwTDMCfgAvePktLossTimeWindow     Integer32,
+     pwTDMCfgExcessivePktLossThreshold   Unsigned32,
+     pwTDMCfgAlarmThreshold           Unsigned32,
+     pwTDMCfgClearAlarmThreshold      Unsigned32,
+     pwTDMCfgMissingPktsToSes         Unsigned32,
+     pwTDMCfgTimestampMode            INTEGER,
+     pwTDMCfgStorageType              StorageType,
+     pwTDMCfgPktFiller                Unsigned32,
+     pwTDMCfgName                     SnmpAdminString
+     }
+
+pwTDMCfgIndex   OBJECT-TYPE
+  SYNTAX        PwTDMCfgIndex
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "Index to an entry in this table.  When an NMS creates
+       a new entry/row in this table, it best makes use of
+       the value of the pwTDMCfgIndexNext object in order to
+       find a free or available index value."
+  ::= { pwTDMCfgEntry 1 }
+
+pwTDMCfgRowStatus    OBJECT-TYPE
+  SYNTAX               RowStatus
+  MAX-ACCESS           read-create
+  STATUS               current
+  DESCRIPTION
+      "Object used for creating, modifying, and deleting
+       a row from this table.  The following objects cannot be
+       modified if the entry is in use and the status is active:
+       pwTDMCfgPayloadSize, pwTDMCfgRtpHdrUsed,
+       pwTDMCfgJtrBfrDepth, and pwTDMCfgPayloadSuppression.
+       The row cannot be deleted if the entry is in use."
+  ::= { pwTDMCfgEntry 2 }
+
+pwTDMCfgPayloadSize OBJECT-TYPE
+  SYNTAX        Unsigned32
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "The value of this object indicates the PayLoad Size (in bytes)
+       to be defined during the PW setUp.  Upon TX, implementation
+       must be capable of carrying that amount of bytes.
+       Upon RX, when the Low Entry Networking (LEN) field is set
+       to 0, the payload of packet MUST assume this size, and if
+       the actual packet size is inconsistent with this length,
+       the packet MUST be considered to be malformed."
+  ::= { pwTDMCfgEntry 4 }
+
+pwTDMCfgPktReorder OBJECT-TYPE
+  SYNTAX        TruthValue
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "If set to True: as CE-bound packets are queued in the
+       jitter buffer, out of order packets are re-ordered.  The
+       maximum sequence number differential (i.e., the range in
+       which re-sequencing can occur) is dependant on the depth
+       of the jitter buffer.  See pwTDMCfgJtrBfrDepth.
+
+       NOTE: Some implementations may not support this feature.
+       The agent should then reject a SET request for true."
+  ::= { pwTDMCfgEntry 5 }
+
+pwTDMCfgRtpHdrUsed OBJECT-TYPE
+  SYNTAX        TruthValue
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "If set to False: an RTP header is not pre-pended to the
+       TDM packet."
+  REFERENCE
+   "SATOP"
+  DEFVAL { false }
+  ::= { pwTDMCfgEntry 6 }
+
+pwTDMCfgJtrBfrDepth OBJECT-TYPE
+  SYNTAX        Unsigned32
+  UNITS         "microsecond"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "The size of this buffer SHOULD be locally
+       configured to allow accommodation to the PSN-specific packet
+       delay variation.
+
+       If configured to a value not supported by the
+       implementation, the agent MUST return an error code
+       'jtrBfrDepth' in 'pwTDMConfigError'.
+
+       NOTE: jitter buffers are a limited resource to
+       be managed.  The actual size should be at least twice as big
+       as the value of pwTDMCfgJtrBfrDepth."
+  DEFVAL { 3000 }
+  ::= { pwTDMCfgEntry 7 }
+
+pwTDMCfgPayloadSuppression  OBJECT-TYPE
+  SYNTAX        INTEGER
+                 {
+                    enable  ( 1),
+                    disable ( 2)
+                 }
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "Selecting 'enable' means: Payload suppression is allowed.
+       Payload MAY be omitted in order to conserve bandwidth.
+       Selecting 'disable' means: No suppression under any
+       condition.
+       Object MAY be changed at any time."
+ DEFVAL { disable }
+  ::= { pwTDMCfgEntry 8 }
+
+pwTDMCfgConsecPktsInSynch          OBJECT-TYPE
+  SYNTAX        Unsigned32 (1..10)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "The number of consecutive packets with sequential
+       sequence numbers that are required to exit the
+       LOPS.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  REFERENCE
+      "SATOP"
+  DEFVAL { 2 }
+  ::= { pwTDMCfgEntry 9 }
+
+pwTDMCfgConsecMissPktsOutSynch  OBJECT-TYPE
+  SYNTAX        Unsigned32 (1..15)
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "The number of consecutive missing packets that are
+
+       required to enter the LOPS.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  REFERENCE
+      "SATOP"
+  DEFVAL { 10 }
+  ::= { pwTDMCfgEntry 10 }
+
+pwTDMCfgSetUp2SynchTimeOut OBJECT-TYPE
+  SYNTAX        Unsigned32
+  UNITS         "millisecond"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "The amount of time the host should wait before declaring the
+       pseudowire in a down state, if the number of consecutive
+       TDM packets that have been received after changing the
+       administrative status to up and after finalization of
+       signaling (if supported) between the two PEs is smaller
+       than pwTDMCfgConsecPktsInSynch.  Once the PW has
+       OperStatus of 'up', this parameter is no longer valid.  This
+       parameter is defined to ensure that the host does not
+       prematurely inform failure of the PW.  In particular, PW
+       'down' notifications should not be sent before expiration
+       of this timer.  This parameter is valid only after
+       administrative changes of the status of the PW.  If the PW
+       fails due to network impairments, a 'down' notification
+       should be sent.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  DEFVAL {5000}
+  ::= { pwTDMCfgEntry 11 }
+
+pwTDMCfgPktReplacePolicy OBJECT-TYPE
+  SYNTAX        INTEGER
+                      {
+                       allOnes (1),
+                       implementationSpecific(2),
+                       filler (3)  --user defined
+                       }
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "This parameter determines the value to be played when CE bound
+       packets over/underflow the jitter buffer, or are missing
+       for any reason.  This byte pattern is sent (played) on
+       the TDM line.  Selecting implementationSpecific(2) implies an
+       agent-specific algorithm.  Selecting filler(3) requires
+
+       the setting of pwTDMCfgPktFiller.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  DEFVAL { allOnes } -- Play AIS
+  ::= { pwTDMCfgEntry 12 }
+
+pwTDMCfgAvePktLossTimeWindow OBJECT-TYPE
+  SYNTAX        Integer32
+  UNITS         "millisecond"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "The length of time over which the average packet
+       loss rate should be computed to detect excessive packet
+       loss rate.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  ::= { pwTDMCfgEntry 13}
+
+pwTDMCfgExcessivePktLossThreshold OBJECT-TYPE
+  SYNTAX        Unsigned32
+  UNITS         "Percent"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "Excessive packet loss rate is detected by computing the
+       average packet-loss rate over a pwTDMCfgAvePktLossTimeWindow
+       amount of time and comparing it with this threshold value.
+       The rate is expressed in percentage.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  ::= { pwTDMCfgEntry 14 }
+
+pwTDMCfgAlarmThreshold OBJECT-TYPE
+  SYNTAX        Unsigned32
+  UNITS         "milisec"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "Alarms are only reported when the defect state persists
+       for the length of time specified by this object.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  DEFVAL { 2500 }
+  ::= { pwTDMCfgEntry 15 }
+
+pwTDMCfgClearAlarmThreshold OBJECT-TYPE
+  SYNTAX        Unsigned32
+  UNITS         "milisec"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "Alarm MUST be cleared after the corresponding defect is
+       undetected for the amount of time specified by this object.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  DEFVAL { 10000 }
+  ::= { pwTDMCfgEntry 16 }
+
+pwTDMCfgMissingPktsToSes OBJECT-TYPE
+  SYNTAX        Unsigned32
+  UNITS         "Percent"
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "Percent of missing packets detected (consecutive or not)
+       within a 1-second window to cause a Severely Error
+       Second (SES) to be counted.
+       Object MAY be changed only when the related PW is
+       defined as not active."
+  DEFVAL { 30 }
+  ::= { pwTDMCfgEntry 17 }
+
+pwTDMCfgTimestampMode  OBJECT-TYPE
+  SYNTAX        INTEGER
+                 {
+                  notApplicable (1),
+                  absolute      (2),
+                  differential  (3)
+                 }
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "Timestamp generation MAY be used in one of the following
+       modes:
+       1. Absolute mode: The PSN-bound IWF sets timestamps
+        using the clock recovered from the incoming TDM attachment
+        circuit.  As a consequence, the timestamps are closely
+        correlated with the sequence numbers.  All TDM
+        implementations that support usage of the RTP header MUST
+        support this mode.
+       2. Differential mode: Both IWFs have access to a common high-
+        quality timing source, and this source is used for timestamp
+        generation.  Support of this mode is OPTIONAL.
+        Object MAY be changed only when the related PW is
+
+        defined as not active."
+  ::= { pwTDMCfgEntry 18 }
+
+pwTDMCfgStorageType  OBJECT-TYPE
+  SYNTAX            StorageType
+  MAX-ACCESS        read-create
+  STATUS            current
+  DESCRIPTION
+      "This variable indicates the storage type for this
+       row.  Conceptual rows having the value permanent(4) must
+       allow write-access to all columnar objects."
+  ::= { pwTDMCfgEntry 19 }
+
+pwTDMCfgPktFiller OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..255)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Filler byte pattern played out on the TDM
+       interface if pwTDMCfgPktReplacePolicy
+       was set to filler(3).
+       Object MAY be changed only when the related PW is
+       defined as not active."
+   DEFVAL
+       { 255 } -- Play all ones, equal to AIS indications.
+   ::= { pwTDMCfgEntry 20 }
+
+pwTDMCfgName OBJECT-TYPE
+  SYNTAX        SnmpAdminString
+  MAX-ACCESS    read-create
+  STATUS        current
+  DESCRIPTION
+      "A descriptive string, preferably a unique name, to an entry
+      in this table.
+      Object MAY be changed at any time."
+  ::= { pwTDMCfgEntry 21 }
+
+-- End of Table
+
+-- The following counters work together to integrate
+-- errors and the lack of errors on the TDM PW.  An error is
+-- caused by a missing packet.  A missing packet can be a result
+-- of: packet loss in the network, (uncorrectable) packet out
+-- of sequence, packet length error, jitter buffer overflow,
+-- and jitter buffer underflow.  The result is declaring whether
+-- or not the TDM PW is in Loss of Packet State (LOPS).
+
+-- TDM PW Performance Current Table
+
+pwTDMPerfCurrentTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwTDMPerfCurrentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "The current 15-minute interval counts are in
+       this table.
+
+       This table provides per TDM PW performance information."
+  ::= { pwTDMObjects 5 }
+
+pwTDMPerfCurrentEntry OBJECT-TYPE
+  SYNTAX        PwTDMPerfCurrentEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "An entry in this table is created by the agent for every
+       pwTDMTable entry.  After 15 minutes, the contents of this
+       table entry are copied to a new entry in the
+       pwTDMPerfInterval table, and the counts in this entry
+       are reset to zero."
+  INDEX  { pwIndex }
+  ::= { pwTDMPerfCurrentTable 1 }
+
+PwTDMPerfCurrentEntry ::= SEQUENCE {
+
+     pwTDMPerfCurrentMissingPkts         PerfCurrentCount,
+     pwTDMPerfCurrentPktsReOrder         PerfCurrentCount,
+     pwTDMPerfCurrentJtrBfrUnderruns     PerfCurrentCount,
+     pwTDMPerfCurrentMisOrderDropped     PerfCurrentCount,
+     pwTDMPerfCurrentMalformedPkt        PerfCurrentCount,
+     pwTDMPerfCurrentESs                 PerfCurrentCount,
+     pwTDMPerfCurrentSESs                PerfCurrentCount,
+     pwTDMPerfCurrentUASs                PerfCurrentCount,
+     pwTDMPerfCurrentFC                  PerfCurrentCount
+  }
+
+pwTDMPerfCurrentMissingPkts OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS       current
+  DESCRIPTION
+      "Number of missing packets (as detected via control word
+       sequence number gaps)."
+  ::= { pwTDMPerfCurrentEntry 1 }
+
+pwTDMPerfCurrentPktsReOrder OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of sequence (via control
+       word sequence number) but successfully re-ordered.
+       Note: some implementations may not support this feature."
+  ::= { pwTDMPerfCurrentEntry 2 }
+
+pwTDMPerfCurrentJtrBfrUnderruns OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of times a packet needed to be played
+       out and the jitter buffer was empty."
+  ::= { pwTDMPerfCurrentEntry 3 }
+
+pwTDMPerfCurrentMisOrderDropped OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of order (via control word
+       sequence numbers) that could not be re-ordered or could
+       not fit in the jitter buffer."
+   ::= { pwTDMPerfCurrentEntry 4 }
+
+pwTDMPerfCurrentMalformedPkt OBJECT-TYPE
+  SYNTAX        PerfCurrentCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected with unexpected size or
+       bad headers' stack."
+  ::= { pwTDMPerfCurrentEntry 5 }
+
+pwTDMPerfCurrentESs OBJECT-TYPE
+   SYNTAX       PerfCurrentCount
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+       "The counter associated with the number of Error
+        Seconds encountered.  Any malformed packet, sequence error,
+        LOPS, and the like are considered as Error Seconds."
+   ::= { pwTDMPerfCurrentEntry 6 }
+
+pwTDMPerfCurrentSESs OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The counter associated with the number of
+        Severely Error Seconds encountered."
+   ::= { pwTDMPerfCurrentEntry 7 }
+
+pwTDMPerfCurrentUASs OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The counter associated with the number of
+        Unavailable Seconds encountered.  Any consecutive
+        ten seconds of SES are counted as one Unavailable
+        Seconds (UAS)."
+   ::= { pwTDMPerfCurrentEntry 8 }
+
+pwTDMPerfCurrentFC OBJECT-TYPE
+   SYNTAX        PerfCurrentCount
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "TDM Failure Counts (FC-TDM).  The number of TDM failure
+        events.  A failure event begins when the LOPS failure
+        is declared, and it ends when the failure is cleared.  A
+        failure event that begins in one period and ends in
+        another period is counted only in the period in which
+        it begins."
+   ::= { pwTDMPerfCurrentEntry 9 }
+
+-- End TDM PW Performance Current Interval Table
+
+-- TDM PW Performance Interval Table
+
+pwTDMPerfIntervalTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwTDMPerfIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "This table provides performance information per TDM PW
+       similar to the pwTDMPerfCurrentTable above.  However,
+       these counts represent historical 15-minute intervals.
+       Typically, this table will have a maximum of 96 entries
+       for a 24 hour period, but is not limited to this."
+  ::= { pwTDMObjects 6 }
+
+pwTDMPerfIntervalEntry OBJECT-TYPE
+  SYNTAX        PwTDMPerfIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "An entry in this table is created by the agent for
+       every pwTDMPerfCurrentEntry that is 15 minutes old.
+       The contents of the Current entry are copied to the new
+       entry here.  The Current entry then resets its counts
+       to zero for the next current 15-minute interval."
+  INDEX  { pwIndex, pwTDMPerfIntervalNumber }
+  ::= { pwTDMPerfIntervalTable 1 }
+
+PwTDMPerfIntervalEntry ::= SEQUENCE {
+     pwTDMPerfIntervalNumber           Unsigned32,
+     pwTDMPerfIntervalValidData        TruthValue,
+     pwTDMPerfIntervalDuration         Unsigned32,
+     pwTDMPerfIntervalMissingPkts      PerfIntervalCount,
+     pwTDMPerfIntervalPktsReOrder      PerfIntervalCount,
+     pwTDMPerfIntervalJtrBfrUnderruns  PerfIntervalCount,
+     pwTDMPerfIntervalMisOrderDropped  PerfIntervalCount,
+     pwTDMPerfIntervalMalformedPkt     PerfIntervalCount,
+     pwTDMPerfIntervalESs              PerfIntervalCount,
+     pwTDMPerfIntervalSESs             PerfIntervalCount,
+     pwTDMPerfIntervalUASs             PerfIntervalCount,
+     pwTDMPerfIntervalFC               PerfIntervalCount
+     }
+
+pwTDMPerfIntervalNumber OBJECT-TYPE
+  SYNTAX        Unsigned32 (1..96)
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "A number (normally between 1 and 96 to cover a 24 hour
+       period) that identifies the interval for which the set
+       of statistics is available.  The interval identified by 1
+
+       is the most recently completed 15-minute interval, and
+       the interval identified by N is the interval immediately
+       preceding the one identified by N-1.  The minimum range of
+       N is 1 through 4.  The default range is 1 through 32.  The
+       maximum value of N is 1 through 96."
+  ::= { pwTDMPerfIntervalEntry 1 }
+
+pwTDMPerfIntervalValidData OBJECT-TYPE
+  SYNTAX        TruthValue
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "This variable indicates if the data for this interval
+       is valid."
+  ::= { pwTDMPerfIntervalEntry 2 }
+
+pwTDMPerfIntervalDuration OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "The duration of a particular interval in seconds.
+      Adjustments in the system's time-of-day clock may
+      cause the interval to be greater or less than the
+      normal value.  Therefore, this actual interval value
+      is provided."
+   ::= { pwTDMPerfIntervalEntry 3 }
+
+pwTDMPerfIntervalMissingPkts OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of missing packets (as detected via control
+       word sequence number gaps)."
+  ::= { pwTDMPerfIntervalEntry 4 }
+
+pwTDMPerfIntervalPktsReOrder OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of sequence (via control
+       word sequence number) but successfully re-ordered.
+       Note: some implementations may not support this
+       feature."
+  ::= { pwTDMPerfIntervalEntry 5 }
+
+pwTDMPerfIntervalJtrBfrUnderruns OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of times a packet needed to be played
+       out and the jitter buffer was empty."
+  ::= { pwTDMPerfIntervalEntry 6 }
+
+pwTDMPerfIntervalMisOrderDropped OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of order (via control word
+       sequence numbers) that could not be re-ordered or could
+       not fit in the jitter buffer."
+  ::= { pwTDMPerfIntervalEntry 7 }
+
+pwTDMPerfIntervalMalformedPkt OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected with unexpected size, or
+       bad headers' stack"
+  ::= { pwTDMPerfIntervalEntry 8 }
+
+pwTDMPerfIntervalESs OBJECT-TYPE
+  SYNTAX       PerfIntervalCount
+  MAX-ACCESS   read-only
+  STATUS       current
+  DESCRIPTION
+      "The counter associated with the number of Error
+       Seconds encountered."
+  ::= { pwTDMPerfIntervalEntry 9 }
+
+pwTDMPerfIntervalSESs OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "The counter associated with the number of
+       Severely Error Seconds encountered."
+  ::= { pwTDMPerfIntervalEntry 10 }
+
+pwTDMPerfIntervalUASs OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "The counter associated with the number of
+       Unavailable Seconds encountered."
+  ::= { pwTDMPerfIntervalEntry 11 }
+
+pwTDMPerfIntervalFC OBJECT-TYPE
+  SYNTAX        PerfIntervalCount
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "TDM Failure Counts (FC-TDM).  The number of TDM failure
+       events.  A failure event begins when the LOPS failure
+       is declared, and it ends when the failure is cleared.  A
+       failure event that begins in one period and ends in
+       another period is counted only in the period in which
+       it begins."
+  ::= { pwTDMPerfIntervalEntry 12 }
+
+-- End TDM PW Performance Interval Table
+
+-- TDM PW 1day Performance Table
+
+pwTDMPerf1DayIntervalTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PwTDMPerf1DayIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "This table provides performance information per TDM PW
+       similar to the pwTDMPerfIntervalTable above.  However,
+       these counters represent historical one-day intervals up to
+       one full month.  The table consists of real-time data, as
+       such it is not persistence across re-boot."
+  ::= { pwTDMObjects 7 }
+
+pwTDMPerf1DayIntervalEntry OBJECT-TYPE
+  SYNTAX        PwTDMPerf1DayIntervalEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "An entry is created in this table by the agent
+       for every entry in the pwTDMTable table."
+  INDEX  { pwIndex,pwTDMPerf1DayIntervalNumber }
+     ::= { pwTDMPerf1DayIntervalTable 1 }
+
+PwTDMPerf1DayIntervalEntry ::= SEQUENCE {
+     pwTDMPerf1DayIntervalNumber                Unsigned32,
+     pwTDMPerf1DayIntervalValidData             TruthValue,
+     pwTDMPerf1DayIntervalDuration              Unsigned32,
+     pwTDMPerf1DayIntervalMissingPkts           Counter32,
+     pwTDMPerf1DayIntervalPktsReOrder           Counter32,
+     pwTDMPerf1DayIntervalJtrBfrUnderruns       Counter32,
+     pwTDMPerf1DayIntervalMisOrderDropped       Counter32,
+     pwTDMPerf1DayIntervalMalformedPkt          Counter32,
+     pwTDMPerf1DayIntervalESs                   Counter32,
+     pwTDMPerf1DayIntervalSESs                  Counter32,
+     pwTDMPerf1DayIntervalUASs                  Counter32,
+     pwTDMPerf1DayIntervalFC                    Counter32
+     }
+
+pwTDMPerf1DayIntervalNumber OBJECT-TYPE
+  SYNTAX        Unsigned32 (1..30)
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+      "The number of intervals where 1 indicates the current day
+       measured period and 2 and above indicate previous days,
+       respectively."
+  ::= { pwTDMPerf1DayIntervalEntry 1 }
+
+pwTDMPerf1DayIntervalValidData OBJECT-TYPE
+  SYNTAX        TruthValue
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "This variable indicates if the data for this interval
+       is valid."
+  ::= { pwTDMPerf1DayIntervalEntry 2 }
+
+pwTDMPerf1DayIntervalDuration OBJECT-TYPE
+  SYNTAX      Unsigned32
+  UNITS       "seconds"
+  MAX-ACCESS  read-only
+  STATUS      current
+  DESCRIPTION
+    "The duration of a particular interval in seconds.
+     Adjustments in the system's time-of-day clock may
+     cause the interval to be greater or less than the
+     normal value.  Therefore, this actual interval value
+     is provided."
+  ::= { pwTDMPerf1DayIntervalEntry 3 }
+
+pwTDMPerf1DayIntervalMissingPkts OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+    "Number of missing packets (as detected via control word
+     sequence number gaps)."
+  ::= { pwTDMPerf1DayIntervalEntry 4 }
+
+pwTDMPerf1DayIntervalPktsReOrder OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of sequence (via control
+       word sequence number) but successfully re-ordered.
+       Note: some implementations may not support this
+       feature."
+  ::= { pwTDMPerf1DayIntervalEntry 5 }
+
+pwTDMPerf1DayIntervalJtrBfrUnderruns OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of times a packet needed to be played
+       out and the jitter buffer was empty."
+  ::= { pwTDMPerf1DayIntervalEntry 6 }
+
+pwTDMPerf1DayIntervalMisOrderDropped OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected out of order (via control word
+       sequence numbers) that could not be re-ordered or could
+       not fit in the jitter buffer."
+  ::= { pwTDMPerf1DayIntervalEntry 7 }
+
+pwTDMPerf1DayIntervalMalformedPkt OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "Number of packets detected with unexpected size or
+       bad headers' stack."
+  ::= { pwTDMPerf1DayIntervalEntry 8 }
+
+pwTDMPerf1DayIntervalESs OBJECT-TYPE
+  SYNTAX       Counter32
+  MAX-ACCESS   read-only
+  STATUS       current
+  DESCRIPTION
+      "The counter associated with the number of Error
+       Seconds encountered."
+  ::= { pwTDMPerf1DayIntervalEntry 9 }
+
+pwTDMPerf1DayIntervalSESs OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "The counter associated with the number of Severely
+       Error Seconds."
+  ::= { pwTDMPerf1DayIntervalEntry 10 }
+
+pwTDMPerf1DayIntervalUASs OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "The counter associated with the number of
+       UnAvailable Seconds.
+
+       NOTE: When first entering the UAS state, the number
+       of SES to UAS is added to this object, then as each
+       additional UAS occurs, this object increments by one."
+  ::= { pwTDMPerf1DayIntervalEntry 11 }
+
+pwTDMPerf1DayIntervalFC OBJECT-TYPE
+  SYNTAX        Counter32
+  MAX-ACCESS    read-only
+  STATUS        current
+  DESCRIPTION
+      "TDM Failure Counts (FC-TDM).  The number of TDM failure
+       events.  A failure event begins when the LOPS failure
+       is declared, and it ends when the failure is cleared."
+  ::= { pwTDMPerf1DayIntervalEntry 12 }
+
+-- End of PW TDM Performance table
+
+-- Conformance Information
+
+pwTDMCompliances OBJECT IDENTIFIER ::= { pwTDMConformance 1 }
+pwTDMGroups      OBJECT IDENTIFIER ::= { pwTDMConformance 2 }
+
+pwTDMModuleCompliance MODULE-COMPLIANCE
+   STATUS  current
+   DESCRIPTION
+       "The compliance statement for agent that support TDM PW
+        over PSN operation."
+
+   MODULE  -- this module
+       MANDATORY-GROUPS { pwTDMGroup,
+                          pwTDMPerfCurrentGroup,
+                          pwTDMPerfIntervalGroup,
+                          pwTDMPerf1DayIntervalGroup
+                        }
+
+                  OBJECT pwGenTDMCfgIndex
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set an index pointer
+                      is not required."
+
+                  OBJECT pwRelTDMCfgIndex
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set an index pointer
+                      is not required."
+
+                  OBJECT pwTDMCfgPktReorder
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set the packet reordering
+                      is not required.  If the feature is not
+                      supported, the value set by the agent MUST
+                      be FALSE."
+
+                  OBJECT pwTDMCfgRtpHdrUsed
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set whether or not to use the
+                       RTP header is not required."
+
+                  OBJECT pwTDMCfgPayloadSuppression
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set this object is not
+                       required."
+
+                  OBJECT pwTDMCfgPktReplacePolicy
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set the replace policy
+                      is not required."
+
+                  OBJECT pwTDMCfgStorageType
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set the storage type is
+                      not required."
+
+                  OBJECT pwTDMCfgPktFiller
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set the filler pattern
+                      is not required."
+                  OBJECT pwTDMCfgName
+                  MIN-ACCESS read-only
+                  DESCRIPTION
+                      "The ability to set an alias
+                      is not required."
+   ::= { pwTDMCompliances 1 }
+
+-- Units of conformance
+
+pwTDMGroup OBJECT-GROUP
+  OBJECTS {
+           pwTDMRate,
+           pwTDMIfIndex,
+           pwGenTDMCfgIndex,
+           pwRelTDMCfgIndex,
+           pwTDMConfigError,
+           pwTDMTimeElapsed,
+           pwTDMValidIntervals,
+           pwTDMValidDayIntervals,
+           pwTDMLastEsTimeStamp,
+           pwTDMCfgIndexNext,
+           pwTDMCfgRowStatus,
+           pwTDMCfgPayloadSize,
+           pwTDMCfgPktReorder,
+           pwTDMCfgRtpHdrUsed,
+           pwTDMCfgJtrBfrDepth,
+           pwTDMCfgPayloadSuppression,
+           pwTDMCfgConsecPktsInSynch,
+           pwTDMCfgConsecMissPktsOutSynch,
+           pwTDMCfgSetUp2SynchTimeOut,
+           pwTDMCfgPktReplacePolicy,
+           pwTDMCfgAvePktLossTimeWindow ,
+           pwTDMCfgExcessivePktLossThreshold,
+           pwTDMCfgAlarmThreshold ,
+           pwTDMCfgClearAlarmThreshold,
+           pwTDMCfgMissingPktsToSes,
+           pwTDMCfgTimestampMode,
+           pwTDMCfgStorageType,
+           pwTDMCfgPktFiller,
+           pwTDMCfgName
+           }
+  STATUS  current
+  DESCRIPTION
+      "Collection of objects for basic TDM PW config and
+       status."
+  ::= { pwTDMGroups 1 }
+
+pwTDMPerfCurrentGroup OBJECT-GROUP
+  OBJECTS {
+           pwTDMPerfCurrentMissingPkts,
+           pwTDMPerfCurrentPktsReOrder,
+           pwTDMPerfCurrentJtrBfrUnderruns,
+           pwTDMPerfCurrentMisOrderDropped,
+           pwTDMPerfCurrentMalformedPkt,
+           pwTDMPerfCurrentESs,
+           pwTDMPerfCurrentSESs,
+           pwTDMPerfCurrentUASs,
+           pwTDMPerfCurrentFC
+           }
+  STATUS  current
+  DESCRIPTION
+      "Collection of current statistics objects for TDM PWs."
+  ::= { pwTDMGroups 2 }
+
+pwTDMPerfIntervalGroup OBJECT-GROUP
+  OBJECTS {
+           pwTDMPerfIntervalValidData,
+           pwTDMPerfIntervalDuration,
+           pwTDMPerfIntervalMissingPkts,
+           pwTDMPerfIntervalPktsReOrder,
+           pwTDMPerfIntervalJtrBfrUnderruns,
+           pwTDMPerfIntervalMisOrderDropped,
+           pwTDMPerfIntervalMalformedPkt,
+           pwTDMPerfIntervalESs,
+           pwTDMPerfIntervalSESs,
+           pwTDMPerfIntervalUASs,
+           pwTDMPerfIntervalFC
+
+  }
+  STATUS  current
+  DESCRIPTION
+         "Collection of Interval statistics objects for TDM PWs."
+  ::= { pwTDMGroups 3 }
+
+pwTDMPerf1DayIntervalGroup OBJECT-GROUP
+  OBJECTS {
+           pwTDMPerf1DayIntervalValidData,
+           pwTDMPerf1DayIntervalDuration,
+           pwTDMPerf1DayIntervalMissingPkts,
+           pwTDMPerf1DayIntervalPktsReOrder,
+           pwTDMPerf1DayIntervalJtrBfrUnderruns,
+           pwTDMPerf1DayIntervalMisOrderDropped,
+           pwTDMPerf1DayIntervalMalformedPkt,
+           pwTDMPerf1DayIntervalESs,
+           pwTDMPerf1DayIntervalSESs,
+           pwTDMPerf1DayIntervalUASs,
+           pwTDMPerf1DayIntervalFC
+           }
+  STATUS  current
+  DESCRIPTION
+         "Collection of Daily statistics objects for TDM PWs."
+  ::= { pwTDMGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/PerfHist-TC-MIB.mib b/snmp_builder/mibs/PerfHist-TC-MIB.mib
new file mode 100644
index 0000000..dfcf17e
--- /dev/null
+++ b/snmp_builder/mibs/PerfHist-TC-MIB.mib
@@ -0,0 +1,178 @@
+PerfHist-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY,
+   Gauge32, mib-2
+       FROM SNMPv2-SMI
+   TEXTUAL-CONVENTION
+       FROM SNMPv2-TC;
+
+perfHistTCMIB MODULE-IDENTITY
+     LAST-UPDATED "200308130000Z"
+     ORGANIZATION "IETF AToM MIB WG"
+     CONTACT-INFO
+        "WG charter:
+           http://www.ietf.org/html.charters/atommib-charter.html
+
+         Mailing Lists:
+           General Discussion: atommib@research.telcordia.com
+           To Subscribe: atommib-request@research.telcordia.com
+
+         Editor:  Kaj Tesink
+         Postal:  Telcordia Technologies
+                  331 Newman Springs Road
+                  Red Bank, NJ 07701
+                  USA
+         Tel:     +1 732 758 5254
+         E-mail:  kaj@research.telcordia.com"
+     DESCRIPTION
+      "This MIB Module provides Textual Conventions
+       to be used by systems supporting 15 minute
+       based performance history counts.
+
+       Copyright (C) The Internet Society (2003).
+       This version of this MIB module is part of
+       RFC 3593;  see the RFC itself for full
+       legal notices."
+     REVISION      "200308130000Z"
+     DESCRIPTION
+      "Contact information and references updated.
+       No technical changes have been applied.
+       Published as RFC 3593."
+     REVISION      "199811071100Z"
+     DESCRIPTION
+      "The RFC 2493 version of this MIB module."
+     ::= { mib-2 58 }
+
+-- The Textual Conventions defined below are organized
+-- alphabetically
+
+-- Use of these TCs assumes the following:
+-- 0  The agent supports 15 minute based history
+--    counters.
+-- 0  The agent is capable of keeping a history of n
+--    intervals of 15 minute performance data.  The
+--    value of n is defined by the specific MIB
+--    module but shall be 0 < n =< 96.
+-- 0  The agent may optionally support performance
+--    data aggregating the history intervals.
+-- 0  The agent will keep separate tables for the
+--    current interval, the history intervals, and
+--    the total aggregates.
+-- 0  The agent will keep the following objects.
+--    If performance data is kept for multiple instances
+--    of a measured entity, then
+--    these objects are applied to each instance of
+--    the measured entity (e.g., interfaces).
+--
+-- xyzTimeElapsed OBJECT-TYPE
+--       SYNTAX  INTEGER (0..899)
+--       MAX-ACCESS  read-only
+--       STATUS  current
+--       DESCRIPTION
+--       "The number of seconds that have elapsed since
+--       the beginning of the current measurement period.
+--       If, for some reason, such as an adjustment in the
+--       system's time-of-day clock, the current interval
+--       exceeds the maximum value, the agent will return
+--       the maximum value."
+--       ::= { xxx }
+
+-- xyzValidIntervals OBJECT-TYPE
+--       SYNTAX  INTEGER (0..<n>)
+--       MAX-ACCESS  read-only
+--       STATUS  current
+--       DESCRIPTION
+--       "The number of previous near end intervals
+--       for which data was collected.
+--          [ The overall constraint on <n> is 1 =< n =< 96; ]
+--          [ Define any additional constraints on <n> here. ]
+--       The value will be <n> unless the measurement was
+--       (re-)started within the last (<n>*15) minutes, in which
+--       case the value will be the number of complete 15
+--       minute intervals for which the agent has at least
+--       some data.  In certain cases (e.g., in the case
+
+--       where the agent is a proxy) it is possible that some
+--       intervals are unavailable.  In this case, this
+--       interval is the maximum interval number for
+--       which data is available."
+--       ::= { xxx }
+
+-- xyzInvalidIntervals OBJECT-TYPE
+--     SYNTAX  INTEGER (0..<n>)
+--     MAX-ACCESS  read-only
+--     STATUS  current
+--     DESCRIPTION
+--       "The number of intervals in the range from
+--        0 to xyzValidIntervals for which no
+--        data is available.  This object will typically
+--        be zero except in cases where the data for some
+--        intervals are not available (e.g., in proxy
+--        situations)."
+--       ::= { xxx }
+
+PerfCurrentCount ::= TEXTUAL-CONVENTION
+      STATUS  current
+      DESCRIPTION
+         "A counter associated with a
+          performance measurement in a current 15
+          minute measurement interval.  The value
+          of this counter starts from zero and is
+          increased when associated events occur,
+          until the end of the 15 minute interval.
+          At that time the value of the counter is
+          stored in the first 15 minute history
+          interval, and the CurrentCount is
+          restarted at zero.  In the
+          case where the agent has no valid data
+          available for the current interval the
+          corresponding object instance is not
+          available and upon a retrieval request
+          a corresponding error message shall be
+          returned to indicate that this instance
+          does not exist (for example, a noSuchName
+          error for SNMPv1 and a noSuchInstance for
+          SNMPv2 GET operation)."
+       SYNTAX  Gauge32
+
+PerfIntervalCount ::= TEXTUAL-CONVENTION
+      STATUS  current
+      DESCRIPTION
+         "A counter associated with a
+          performance measurement in a previous
+          15 minute measurement interval.  In the
+          case where the agent has no valid data
+          available for a particular interval the
+          corresponding object instance is not
+          available and upon a retrieval request
+          a corresponding error message shall be
+          returned to indicate that this instance
+          does not exist (for example, a noSuchName
+          error for SNMPv1 and a noSuchInstance for
+          SNMPv2 GET operation).
+          In a system supporting
+          a history of n intervals with
+          IntervalCount(1) and IntervalCount(n) the
+          most and least recent intervals
+          respectively, the following applies at
+          the end of a 15 minute interval:
+          - discard the value of IntervalCount(n)
+          - the value of IntervalCount(i) becomes that
+            of IntervalCount(i-1) for n >= i > 1
+          - the value of IntervalCount(1) becomes that
+            of CurrentCount
+          - the TotalCount, if supported, is adjusted."
+       SYNTAX  Gauge32
+
+PerfTotalCount ::= TEXTUAL-CONVENTION
+      STATUS  current
+      DESCRIPTION
+         "A counter associated with a
+          performance measurements aggregating the
+          previous valid 15 minute measurement
+          intervals.  (Intervals for which no valid
+          data was available are not counted)"
+       SYNTAX  Gauge32
+
+END
diff --git a/snmp_builder/mibs/Printer-MIB.mib b/snmp_builder/mibs/Printer-MIB.mib
new file mode 100644
index 0000000..16ebe32
--- /dev/null
+++ b/snmp_builder/mibs/Printer-MIB.mib
@@ -0,0 +1,4389 @@
+Printer-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, TimeTicks,
+        NOTIFICATION-TYPE, OBJECT-IDENTITY,
+        mib-2 FROM SNMPv2-SMI                             -- [RFC2578]
+    TEXTUAL-CONVENTION FROM SNMPv2-TC                     -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                                  -- [RFC2580]
+    hrDeviceIndex, hrStorageIndex FROM HOST-RESOURCES-MIB -- [RFC2790]
+    InterfaceIndexOrZero FROM IF-MIB                      -- [RFC2863]
+    PrtCoverStatusTC, PrtGeneralResetTC, PrtChannelTypeTC,
+        PrtInterpreterLangFamilyTC, PrtInputTypeTC, PrtOutputTypeTC,
+        PrtMarkerMarkTechTC, PrtMarkerSuppliesTypeTC, PrtConsoleColorTC,
+        PrtConsoleDisableTC, PrtMediaPathTypeTC, PrtAlertGroupTC,
+        PrtAlertTrainingLevelTC, PrtAlertCodeTC
+        FROM IANA-PRINTER-MIB
+    IANACharset FROM IANA-CHARSET-MIB;
+
+printmib MODULE-IDENTITY
+    LAST-UPDATED "200406020000Z"
+    ORGANIZATION "PWG IEEE/ISTO Printer Working Group"
+
+    CONTACT-INFO
+        "Harry Lewis
+        IBM
+        Phone (303) 924-5337
+        Email: harryl@us.ibm.com
+        http://www.pwg.org/index.html
+
+        Send comments to the printmib WG using the Printer MIB
+        Project (PMP) Mailing List:  pmp@pwg.org
+
+        For further information, access the PWG web page under 'Printer
+        MIB':      http://www.pwg.org/
+
+        Implementers of this specification are encouraged to join the
+        pmp mailing list in order to participate in discussions on any
+        clarifications needed and registration proposals being reviewed
+        in order to achieve consensus."
+    DESCRIPTION
+        "The MIB module for management of printers.
+         Copyright (C) The Internet Society (2004). This
+         version of this MIB module was published
+         in RFC 3805. For full legal notices see the RFC itself."
+    REVISION     "200406020000Z"
+    DESCRIPTION
+        "Printer MIB v2.
+        Moved all enum groups to be maintained by IANA into new TCs
+           within the ianaPrinterMIB, which is contained in this
+           document.
+        New TCs created from enums defined within RFC 1759 Objects:
+           PrtPrintOrientationTC, PrtLocalizedDescriptionStringTC,
+           PrtConsoleDescriptionStringTC, PrtChannelStateTC,
+           PrtOutputStackingOrderTC, PrtOutputPageDeliveryOrientationTC,
+           PrtMarkerCounterUnitTC, PrtMarkerSuppliesSupplyUnitTC,
+           PrtMarkerSuppliesClassTC, PrtMarkerAddressabilityUnitTC,
+           PrtMarkerColorantRoleTC, PrtMediaPathMaxSpeedPrintUnitTC,
+           PrtInterpreterTwoWayTC, and PrtAlertSeverityLevelTC.
+        The following four TCs have been deprecated:
+           MediaUnit (replaced by PrtMediaUnitTC),
+           CapacityUnit (replaced by PrtCapacityUnitTC),
+           SubUnitStatus (replaced by PrtSubUnitStatusTC),
+           CodedCharSet (replaced by IANACharset in IANA Charset MIB)
+        Five new OBJECT-GROUPs: prtAuxilliarySheetGroup,
+           prtInputSwitchingGroup, prtGeneralV2Group,
+           prtAlertTableV2Group, prtChannelV2Group.
+        Nine new objects added to those groups:
+           prtAuxiliarySheetStartupPage, prtAuxiliarySheetBannerPage,
+           prtGeneralPrinterName, prtGeneralSerialNumber,
+           prtAlertCriticalEvents, prtAlertAllEvents,
+           prtInputMediaLoadTimeout, prtInputNextIndex,
+           prtChannelInformation.
+        SYNTAX range changed from (0..65535) to (1..65535) for the
+           index objects prtStorageRefSeqNumber, prtDeviceRefSeqNumber,
+           and prtConsoleLightIndex.
+        SYNTAX range changed from (0..65535) to (0..2147483647) for the
+           objects prtStorageRefIndex and prtDeviceRefIndex to agree
+           with the Host Resources MIB.
+        Defined a range for the objects with a SYNTAX of Integer32:
+           prtOutputDefaultIndex, prtInputMediaDimFeedDirDeclared,
+           prtInputMediaDimXFeedDirDeclared, prtInputMaxCapacity,
+           prtInputCurrentLevel, prtInputMediaDimFeedDirChosen,
+           prtInputMediaDimXFeedDirChosen, prtInputMediaWeight,
+           prtInputMediaFormParts, prtOutputIndex,
+           prtOutputMaxCapacity, prtOutputRemainingCapacity,
+           prtOutputMaxDimFeedDir, prtOutputMaxDimXFeedDir,
+           prtOutputMinDimFeedDir, prtOutputMinDimXFeedDir,
+           prtMarkerAddressibilityFeedDir,
+           prtMarkerAddressibilityXFeedDir, prtMarkerNorthMargin,
+           prtMarkerSouthMargin, prtMarkerWestMargin,
+           prtMarkerEastMargin, prtMarkerSuppliesMaxCapacity,
+           prtMarkerSuppliesLevel, prtMarkerColorantTonality,
+           prtMediaPathMaxSpeed, prtMediaPathMaxMediaFeedDir,
+           prtMediaPathMaxMediaXFeedDir, prtMediaPathMinMediaFeedDir,
+           prtMediaPathMinMediaXFeedDir, prtChannelIndex,
+           prtChannelCurrentJobCntlLangIndex, prtInterpreterIndex,
+           prtChannelDefaultPageDescLangIndex, prtConsoleOnTime,
+           prtInterpreterFeedAddressibility, prtConsoleOffTime,
+           prtInterpreterXFeedAddressibility, prtAlertIndex,
+           prtAlertGroupIndex, prtAlertLocation.
+        Changed SYNTAX from Integer32 to InterfaceIndexOrZero for
+           prtChannelIfIndex.
+        Changed MAX-ACCESS of prtAlertIndex from not-accessible to
+           Read-only and added a compliance statement to allow a
+           MIN-ACCESS of accessible-for-notify.
+        One new NOTIFICATION-GROUP: prtAlertTrapGroup which contains
+           printerV2Alert.
+        In MODULE-COMPLIANCE prtMIBCompliance, new OBJECT-GROUPs and
+           the NOTIFICATION_GROUP, all in GROUP (not MANDATORY-GROUP)
+           clauses.  The nine new objects are optional, i.e., this
+           document is backward compatible with RFC 1759."
+    REVISION     "199411250000Z"
+    DESCRIPTION
+        "The original version of this MIB, published as RFC1759."
+    ::= { mib-2 43 }
+
+-- TEXTUAL-CONVENTIONs for this MIB module
+--
+-- Generic unspecific TEXTUAL-CONVENTIONs
+--
+
+PrtMediaUnitTC ::= TEXTUAL-CONVENTION
+    -- Replaces MediaUnit in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Units of measure for media dimensions."
+    SYNTAX    INTEGER {
+                  tenThousandthsOfInches(3),  -- .0001
+                  micrometers(4)
+                  }
+
+MediaUnit ::= TEXTUAL-CONVENTION
+    -- Replaced by PrtMediaUnitTC.
+    STATUS    deprecated
+    DESCRIPTION
+        "Units of measure for media dimensions."
+    SYNTAX    INTEGER {
+                  tenThousandthsOfInches(3),  -- .0001
+                  micrometers(4)
+                  }
+
+PrtCapacityUnitTC ::= TEXTUAL-CONVENTION
+    -- Replaces CapacityUnit in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Units of measure for media capacity."
+    SYNTAX    INTEGER {
+                  other(1),                   -- New, not in RFC 1759
+                  unknown(2),                 -- New, not in RFC 1759
+                  tenThousandthsOfInches(3),  -- .0001
+                  micrometers(4),
+                  sheets(8),
+                  feet(16),
+                  meters(17),
+                -- Values for Finisher MIB
+                  items(18),                  -- New, not in RFC 1759
+                  percent(19)                 -- New, not in RFC 1759
+                  }
+
+CapacityUnit ::= TEXTUAL-CONVENTION
+    -- Replaced by PrtCapacityUnitTC.
+    STATUS    deprecated
+    DESCRIPTION
+        "Units of measure for media capacity."
+    SYNTAX    INTEGER {
+                  tenThousandthsOfInches(3),  -- .0001
+                  micrometers(4),
+                  sheets(8),
+                  feet(16),
+                  meters(17)
+                  }
+
+PrtPrintOrientationTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtInterpreterDefaultOrientation in
+    -- RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "A generic representation for printing orientation on a
+        'page'."
+    SYNTAX    INTEGER {
+                  other(1),
+                  portrait(3),
+                  landscape(4)
+                  }
+
+PrtSubUnitStatusTC ::= TEXTUAL-CONVENTION
+    -- Replaces SubUnitStatus in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Status of a printer sub-unit.
+
+        The SubUnitStatus is an integer that is the sum of 5 distinct
+        values, Availability, Non-Critical, Critical, On-line, and
+        Transitioning. These values are:
+
+        Availability                           Value
+
+            Available and Idle                  0       0000'b
+            Available and Standby               2       0010'b
+            Available and Active                4       0100'b
+            Available and Busy                  6       0110'b
+            Unavailable and OnRequest           1       0001'b
+            Unavailable because Broken          3       0011'b
+            Unknown                             5       0101'b
+
+        Non-Critical
+            No Non-Critical Alerts              0       0000'b
+            Non-Critical Alerts                 8       1000'b
+
+        Critical
+
+            No Critical Alerts                  0       0000'b
+
+            Critical Alerts                    16     1 0000'b
+
+        On-Line
+
+            State is On-Line                    0       0000'b
+            State is Off-Line                  32    10 0000'b
+
+        Transitioning
+
+            At intended state                   0       0000'b
+            Transitioning to intended state    64   100 0000'b"
+    SYNTAX    INTEGER (0..126)
+
+SubUnitStatus ::= TEXTUAL-CONVENTION
+   -- Replaced by PrtSubUnitStatusTC.
+    STATUS    deprecated
+    DESCRIPTION
+        "Status of a printer sub-unit.
+
+        The SubUnitStatus is an integer that is the sum of 5 distinct
+        values, Availability, Non-Critical, Critical, On-line, and
+        Transitioning. These values are:
+
+        Availability                           Value
+            Available and Idle                  0       0000'b
+            Available and Standby               2       0010'b
+            Available and Active                4       0100'b
+            Available and Busy                  6       0110'b
+            Unavailable and OnRequest           1       0001'b
+            Unavailable because Broken          3       0011'b
+            Unknown                             5       0101'b
+
+        Non-Critical
+            No Non-Critical Alerts              0       0000'b
+            Non-Critical Alerts                 8       1000'b
+
+        Critical
+
+            No Critical Alerts                  0       0000'b
+            Critical Alerts                    16     1 0000'b
+
+        On-Line
+
+            State is On-Line                    0       0000'b
+            State is Off-Line                  32    10 0000'b
+
+        Transitioning
+
+            At intended state                   0       0000'b
+            Transitioning to intended state    64   100 0000'b"
+    SYNTAX    INTEGER (0..126)
+
+PresentOnOff ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+        "Presence and configuration of a device or feature."
+    SYNTAX    INTEGER {
+                  other(1),
+                  on(3),
+                  off(4),
+                  notPresent(5)
+                  }
+
+PrtLocalizedDescriptionStringTC ::= TEXTUAL-CONVENTION
+    -- This TC did not appear in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "An object MUST use this TEXTUAL-CONVENTION when its
+        'charset' is controlled by the value of
+        prtGeneralCurrentLocalization."
+    SYNTAX    OCTET STRING (SIZE(0..255))
+
+PrtConsoleDescriptionStringTC ::= TEXTUAL-CONVENTION
+    -- This TC did not appear in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "An object MUST use this TEXTUAL-CONVENTION when its
+        'charset' is controlled by the value of
+        prtConsoleLocalization."
+    SYNTAX    OCTET STRING (SIZE(0..255))
+
+CodedCharSet ::= TEXTUAL-CONVENTION
+
+   -- Replaced by IANACharset TEXTUAL-CONVENTION in IANA Charset MIB.
+    STATUS     deprecated
+    DESCRIPTION
+       "The original description clause from RFC 1759 [RFC1759] was
+       technically inaccurate and therefore has been deleted."
+   SYNTAX     INTEGER {
+     other(1)               -- used if the designated coded
+                            -- character set is not currently in
+                            -- the enumeration
+}
+
+--
+
+-- Channel Group TEXTUAL-CONVENTIONs
+--
+
+PrtChannelStateTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtChannelState in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The state of this print job delivery channel. The value
+        determines whether print data is allowed through this channel."
+    SYNTAX    INTEGER {
+                  other(1),
+                  printDataAccepted(3),
+                  noDataAccepted(4)
+                  }
+
+--
+-- Input/Output Group TEXTUAL-CONVENTIONs
+--
+
+PrtOutputStackingOrderTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtOutputStackingOrder in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The current state of the stacking order for the associated
+        output sub-unit. 'firstToLast' means that as pages are output,
+        the front of the next page is placed against the back of the
+        previous page. 'lastToFirst' means that as pages are output,
+        the back of the next page is placed against the front of the
+        previous page."
+    SYNTAX    INTEGER {
+                  unknown(2),
+                  firstToLast(3),
+                  lastToFirst(4)
+                  }
+
+PrtOutputPageDeliveryOrientationTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtOutputPageDeliveryOrientation
+    -- in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The reading surface that will be 'up' when pages are delivered
+        to the associated output sub-unit. Values are Face-Up and Face
+        Down (Note: interpretation of these values is, in general,
+        context-dependent based on locale; presentation of these values
+        to an end-user should be normalized to the expectations of the
+        user."
+    SYNTAX    INTEGER {
+                  faceUp(3),
+                  faceDown(4)
+                  }
+
+--
+-- Marker Group TEXTUAL-CONVENTIONs
+--
+
+PrtMarkerCounterUnitTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerCounterUnit in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The unit that will be used by the printer when reporting
+        counter values for this marking sub-unit.  The
+        time units of measure are provided for a device like a
+        strip recorder that does not or cannot track the physical
+        dimensions of the media and does not use characters,
+        lines or sheets."
+    SYNTAX    INTEGER {
+                  tenThousandthsOfInches(3),  -- .0001
+                  micrometers(4),
+                  characters(5),
+                  lines(6),
+                  impressions(7),
+                  sheets(8),
+                  dotRow(9),
+                  hours(11),
+                  feet(16),
+                  meters(17)
+                  }
+
+PrtMarkerSuppliesSupplyUnitTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerSuppliesSupplyUnit
+    -- in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Unit of this marker supply container/receptacle."
+    SYNTAX    INTEGER {
+                  other(1),                   -- New, not in RFC 1759
+                  unknown(2),                 -- New, not in RFC 1759
+                  tenThousandthsOfInches(3),  -- .0001
+                  micrometers(4),
+                  impressions(7),             -- New, not in RFC 1759
+                  sheets(8),                  -- New, not in RFC 1759
+                  hours(11),                  -- New, not in RFC 1759
+                  thousandthsOfOunces(12),
+                  tenthsOfGrams(13),
+                  hundrethsOfFluidOunces(14),
+                  tenthsOfMilliliters(15),
+                  feet(16),                   -- New, not in RFC 1759
+                  meters(17),                 -- New, not in RFC 1759
+                -- Values for Finisher MIB
+                  items(18),  -- e.g., #staples. New, not in RFC 1759
+                  percent(19)                 -- New, not in RFC 1759
+                  }
+
+PrtMarkerSuppliesClassTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerSuppliesClass in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Indicates whether this supply entity represents a supply
+        that is consumed or a receptacle that is filled."
+    SYNTAX    INTEGER {
+                  other(1),
+                  supplyThatIsConsumed(3),
+                  receptacleThatIsFilled(4)
+                  }
+
+PrtMarkerColorantRoleTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerColorantRole in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The role played by this colorant."
+    SYNTAX    INTEGER { --  Colorant Role
+                  other(1),
+                  process(3),
+                  spot(4)
+                  }
+
+PrtMarkerAddressabilityUnitTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtMarkerAddressabilityUnit
+    -- in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The unit of measure of distances, as applied to the marker's
+        resolution."
+    SYNTAX    INTEGER {
+                  tenThousandthsOfInches(3), -- .0001
+                  micrometers(4)
+                  }
+
+--
+-- Media Path TEXTUAL-CONVENTIONs
+--
+
+PrtMediaPathMaxSpeedPrintUnitTC ::= TEXTUAL-CONVENTION
+
+    -- This TC was extracted from prtMediaPathMaxSpeedPrintUnit
+    -- in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The unit of measure used in specifying the speed of all
+        media paths in the printer."
+    SYNTAX    INTEGER {
+                  tenThousandthsOfInchesPerHour(3),-- .0001/hour
+                  micrometersPerHour(4),
+                  charactersPerHour(5),
+                  linesPerHour(6),
+                  impressionsPerHour(7),
+                  sheetsPerHour(8),
+                  dotRowPerHour(9),
+                  feetPerHour(16),
+                  metersPerHour(17)
+                 }
+
+--
+-- Interpreter Group TEXTUAL-CONVENTIONs
+--
+
+PrtInterpreterTwoWayTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtInterpreterTwoWay in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "Indicates whether or not this interpreter returns information
+        back to the host."
+    SYNTAX    INTEGER {
+                  yes(3),
+                  no(4)
+                  }
+
+--
+-- Alert Group TEXTUAL-CONVENTIONs
+--
+
+PrtAlertSeverityLevelTC ::= TEXTUAL-CONVENTION
+    -- This TC was extracted from prtAlertSeverityLevel in RFC 1759.
+    STATUS    current
+    DESCRIPTION
+        "The level of severity of this alert table entry.  The printer
+        determines the severity level assigned to each entry in the
+        table. A critical alert is binary by nature and definition. A
+        warning is defined to be a non-critical alert. The original and
+        most common warning is unary. The binary warning was added later
+        and given a more distinguished name."
+    SYNTAX    INTEGER {
+
+                  other(1),
+                  critical(3),
+                  warning(4),
+                  warningBinaryChangeEvent(5)   -- New, not in RFC 1759
+                  }
+
+-- The General Printer Group
+--
+-- The general printer sub-unit is responsible for the overall
+-- control and status of the printer.  There is exactly one
+-- general printer sub-unit in a printer.
+
+prtGeneral OBJECT IDENTIFIER ::= { printmib 5 }
+
+prtGeneralTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtGeneralEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A table of general information per printer.
+        Objects in this table are defined in various
+        places in the MIB, nearby the groups to
+        which they apply.  They are all defined
+        here to minimize the number of tables that would
+        otherwise need to exist."
+    ::= { prtGeneral 1 }
+
+prtGeneralEntry OBJECT-TYPE
+    SYNTAX     PrtGeneralEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An entry exists in this table for each device entry in the
+        host resources MIB device table with a device type of
+        'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX    { hrDeviceIndex }
+    ::= { prtGeneralTable 1 }
+
+PrtGeneralEntry ::= SEQUENCE {
+    -- Note that not all of the objects in this sequence are in
+    -- the general printer group. The group to which an
+    -- object belongs is tagged with a label "General", "Input"
+    -- "Output", etc. after each entry in the following sequence.
+    --
+    prtGeneralConfigChanges         Counter32, -- General
+
+    prtGeneralCurrentLocalization   Integer32, -- General
+    prtGeneralReset                 PrtGeneralResetTC,
+                                               -- General
+    prtGeneralCurrentOperator       OCTET STRING,
+                                               -- Responsible Party
+    prtGeneralServicePerson         OCTET STRING,
+                                               -- Responsible Party
+    prtInputDefaultIndex            Integer32, -- Input
+    prtOutputDefaultIndex           Integer32, -- Output
+    prtMarkerDefaultIndex           Integer32, -- Marker
+    prtMediaPathDefaultIndex        Integer32, -- Media Path
+    prtConsoleLocalization          Integer32, -- Console
+    prtConsoleNumberOfDisplayLines  Integer32, -- Console
+    prtConsoleNumberOfDisplayChars  Integer32, -- Console
+    prtConsoleDisable               PrtConsoleDisableTC,
+                                               -- Console,
+    prtAuxiliarySheetStartupPage    PresentOnOff,
+                                               -- AuxiliarySheet
+    prtAuxiliarySheetBannerPage     PresentOnOff,
+                                               -- AuxiliarySheet
+    prtGeneralPrinterName           OCTET STRING,
+                                               -- General V2
+    prtGeneralSerialNumber          OCTET STRING,
+                                               -- General V2
+    prtAlertCriticalEvents          Counter32, -- Alert V2
+    prtAlertAllEvents               Counter32  -- Alert V2
+    }
+
+prtGeneralConfigChanges OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Counts configuration changes within the printer. A
+        configuration change is defined to be an action that results in
+        a change to any MIB object other than those that reflect status
+        or level, or those that act as counters or gauges. In addition,
+        any action that results in a row being added or deleted from
+        any table in the Printer MIB is considered a configuration
+        change. Such changes will often affect the capability of the
+        printer to service certain types of print jobs. Management
+        applications may cache infrequently changed configuration
+        information about sub units within the printer. This object
+        should be incremented whenever the agent wishes to notify
+        management applications that any cached configuration
+        information for this device is to be considered 'stale'. At
+        this point, the management application should flush any
+        configuration information cached about this device and fetch
+
+        new configuration information.
+
+        The following are examples of actions that would cause the
+        prtGeneralConfigChanges object to be incremented:
+
+        - Adding an output bin
+        - Changing the media in a sensing input tray
+        - Changing the value of prtInputMediaType
+
+        Note that the prtGeneralConfigChanges counter would not be
+        incremented when an input tray is temporarily removed to load
+        additional paper or when the level of an input device changes.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtGeneralEntry 1 }
+
+prtGeneralCurrentLocalization OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of the prtLocalizationIndex corresponding to the
+        current language, country, and character set to be used for
+        localized string values that are identified as being dependent
+        on the value of this object.  Note that this object does not
+        apply to localized strings in the prtConsole group or to any
+        object that is not explicitly identified as being localized
+        according to prtGeneralCurrentLocalization.  When an object's
+        'charset' is controlled by the value of
+        prtGeneralCurrentLocalization, it MUST specify
+        PrtLocalizedDescriptionStringTC as its syntax.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+   ::= { prtGeneralEntry 2 }
+
+prtGeneralReset OBJECT-TYPE
+    -- NOTE: In RFC 1759, the enumeration values were implicitly defined
+    -- by this object.
+    SYNTAX     PrtGeneralResetTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Setting this value to 'powerCycleReset', 'resetToNVRAM', or
+        'resetToFactoryDefaults' will result in the resetting of the
+        printer.  When read, this object will always have the value
+
+        'notResetting(3)', and a SET of the value 'notResetting' shall
+        have no effect on the printer.  Some of the defined values are
+        optional.  However, every implementation must support at least
+        the values 'notResetting' and 'resetToNVRAM'."
+    ::= { prtGeneralEntry 3 }
+
+-- The Responsible Party group
+
+prtGeneralCurrentOperator OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..127))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The name of the person who is responsible for operating
+        this printer.  It is suggested that this string include
+        information that would enable other humans to reach the
+        operator, such as a phone number.  As a convention to
+        facilitate automatic notification of the operator by the
+        agent or network management station, the phone number,
+        fax number or email address should be indicated by the
+        URL schemes 'tel:', 'fax:' and 'mailto:', respectively.
+        If either the phone, fax, or email information is not
+        available, then a line should not be included for this
+        information.
+
+        NOTE: For interoperability purposes, it is advisable to
+        use email addresses formatted according to [RFC2822]
+        requirements.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtGeneralEntry 4 }
+
+prtGeneralServicePerson OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..127))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The name of the person responsible for servicing this
+        printer.  It is suggested that this string include
+        information that would enable other humans to reach the
+        service person, such as a phone number.  As a convention
+        to facilitate automatic notification of the operator by
+        the agent or network management station, the phone
+        number, fax number or email address should be indicated
+        by the URL schemes 'tel:', 'fax:' and 'mailto:',
+        respectively.  If either the phone, fax, or email
+        information is not available, then a line should not
+
+        be included for this information.
+
+        NOTE: For interoperability purposes, it is advisable to use
+        email addresses formatted per [RFC2822] requirements.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtGeneralEntry 5 }
+
+-- Default indexes section
+--
+-- The following four objects are used to specify the indexes of
+-- certain subunits used as defaults during the printing process.
+
+prtInputDefaultIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of prtInputIndex corresponding to the default input
+        sub-unit: that is, this object selects the default source of
+        input media."
+::= { prtGeneralEntry 6 }
+
+prtOutputDefaultIndex OBJECT-TYPE
+    --  A range has been added to the SYNTAX clause that was not in
+    --  RFC 1759.  Although this violates SNMP compatibility rules,
+    --  it provides a more reasonable guide for SNMP managers.
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of prtOutputIndex corresponding to the default
+        output sub-unit; that is, this object selects the default
+        output destination."
+::= { prtGeneralEntry 7 }
+
+prtMarkerDefaultIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of prtMarkerIndex corresponding to the
+        default marker sub-unit; that is, this object selects the
+        default marker."
+    ::= { prtGeneralEntry 8 }
+
+prtMediaPathDefaultIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of prtMediaPathIndex corresponding to
+        the default media path; that is, the selection of the
+        default media path."
+    ::= { prtGeneralEntry 9 }
+
+-- Console general section
+--
+-- The following four objects describe overall parameters of the
+-- printer console subsystem.
+
+prtConsoleLocalization OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of the prtLocalizationIndex corresponding to
+        the language, country, and character set to be used for the
+        console.  This localization applies both to the actual display
+        on the console as well as the encoding of these console objects
+        in management operations.  When an object's 'charset' is
+        controlled by the value of prtConsoleLocalization, it MUST
+        specify PrtConsoleDescriptionStringTC as its syntax.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtGeneralEntry 10 }
+
+prtConsoleNumberOfDisplayLines OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of lines on the printer's physical
+        display.  This value is 0 if there are no lines on the
+        physical display or if there is no physical display"
+    ::= { prtGeneralEntry 11 }
+
+prtConsoleNumberOfDisplayChars OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of characters per line displayed on the physical
+
+        display.  This value is 0 if there are no lines on the physical
+        display or if there is no physical display"
+    ::= { prtGeneralEntry 12 }
+
+prtConsoleDisable OBJECT-TYPE
+    -- In RFC 1759, the enumeration values were implicitly defined
+    -- by this object.
+    SYNTAX     PrtConsoleDisableTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This value indicates how input is (or is not) accepted from
+        the operator console.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtGeneralEntry 13 }
+
+-- The Auxiliary Sheet Group
+--
+-- The auxiliary sheet group allows the administrator to control
+-- the production of auxiliary sheets by the printer.  This group
+-- contains only the "prtAuxiliarySheetStartupPage" and
+-- "prtAuxiliarySheetBannerPage" objects.
+
+prtAuxiliarySheetStartupPage OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Used to enable or disable printing a startup page.  If enabled,
+        a startup page will be printed shortly after power-up, when the
+        device is ready.  Typical startup pages include test patterns
+        and/or printer configuration information."
+    ::= { prtGeneralEntry 14 }
+
+prtAuxiliarySheetBannerPage OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Used to enable or disable printing banner pages at the
+        beginning of jobs.  This is a master switch which applies to all
+        jobs, regardless of interpreter."
+     ::= { prtGeneralEntry 15 }
+
+-- Administrative section  (The General V2 Group)
+--
+-- The following two objects are used to specify administrative
+-- information assigned to the printer.
+
+prtGeneralPrinterName OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0..127))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "An administrator-specified name for this printer.  Depending
+        upon implementation of this printer, the value of this object
+        may or may not be same as the value for the MIB-II 'SysName'
+        object."
+     ::= { prtGeneralEntry 16 }
+
+prtGeneralSerialNumber OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0..255))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "A recorded serial number for this device that indexes some
+        type device catalog or inventory.  This value is usually set by
+        the device manufacturer but the MIB supports the option of
+        writing for this object for site-specific administration of
+        device inventory or tracking."
+    ::= { prtGeneralEntry 17 }
+
+-- General alert table section  (Alert Table V2 Group)
+--
+-- The following two objects are used to specify counters
+-- associated with the Alert Table.
+
+prtAlertCriticalEvents OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A running counter of the number of critical alert events that
+        have been recorded in the alert table.  The value of this object
+        is RESET in the event of a power cycle operation (i.e., the
+        value is not persistent."
+    ::= { prtGeneralEntry 18 }
+
+prtAlertAllEvents OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A running counter of the total number of alert event entries
+        (critical and non-critical) that have been recorded in the
+        alert table"
+    ::= { prtGeneralEntry 19 }
+
+-- The Cover Table
+--
+-- The cover portion of the General print sub-unit describes the
+-- covers and interlocks of the printer.  The Cover Table has an
+-- entry for each cover and interlock.
+
+prtCover OBJECT IDENTIFIER ::= { printmib 6 }
+
+prtCoverTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtCoverEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A table of the covers and interlocks of the printer."
+    ::= { prtCover 1 }
+
+prtCoverEntry OBJECT-TYPE
+    SYNTAX     PrtCoverEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Information about a cover or interlock.
+        Entries may exist in the table for each device
+        index with a device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtCoverIndex }
+    ::= { prtCoverTable 1 }
+
+PrtCoverEntry ::= SEQUENCE {
+    prtCoverIndex            Integer32,
+    prtCoverDescription      PrtLocalizedDescriptionStringTC,
+    prtCoverStatus           PrtCoverStatusTC
+    }
+
+prtCoverIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this Cover sub
+
+        unit.  Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new cover
+        sub-units to the printer), values SHOULD remain stable across
+        successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtCoverEntry 1 }
+
+prtCoverDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The manufacturer provided cover sub-mechanism name in the
+        localization specified by prtGeneralCurrentLocalization."
+    ::= { prtCoverEntry 2 }
+
+prtCoverStatus  OBJECT-TYPE
+    -- NOTE: In RFC 1759, the enumeration values were implicitly defined
+    -- by this object and are now defined in the IANA-PRINTER-MIB.  The
+    -- new TC has defined "coverOpen" and "coverClosed" to replace
+    -- "doorOpen" and "doorClosed" in RFC 1759.  A name change is not
+    -- formally allowed per SMI rules, but was agreed to by the WG group
+    -- since a door has a more restrictive meaning than a cover and
+    -- Cover group is intended to support doors as a subset of covers.
+   SYNTAX     PrtCoverStatusTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The status of this cover sub-unit."
+    ::= { prtCoverEntry 3 }
+
+-- The Localization Table
+--
+-- The localization portion of the General printer sub-unit is
+-- responsible for identifying the natural language, country, and
+-- character set in which character strings are expressed.  There
+-- may be one or more localizations supported per printer.  The
+-- available localizations are represented by the Localization
+-- table.
+
+prtLocalization  OBJECT IDENTIFIER ::= { printmib 7 }
+
+prtLocalizationTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtLocalizationEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The available localizations in this printer."
+    ::= { prtLocalization 1 }
+
+prtLocalizationEntry OBJECT-TYPE
+    SYNTAX     PrtLocalizationEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A description of a localization.
+        Entries may exist in the table for each device
+        index with a device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtLocalizationIndex }
+    ::= { prtLocalizationTable 1 }
+
+PrtLocalizationEntry ::= SEQUENCE {
+    prtLocalizationIndex          Integer32,
+    prtLocalizationLanguage       OCTET STRING,
+    prtLocalizationCountry        OCTET STRING,
+    prtLocalizationCharacterSet   IANACharset
+    }
+
+prtLocalizationIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this
+        localization entry.  Although these values may change due to a
+        major reconfiguration of the device (e.g., the addition of new
+        localization data to the printer), values SHOULD remain
+        stable across successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtLocalizationEntry 1 }
+
+prtLocalizationLanguage OBJECT-TYPE
+    -- Note: The size is fixed, was incorrectly 0..2 in RFC 1759.
+    SYNTAX     OCTET STRING (SIZE(2))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A two character language code from ISO 639.  Examples en,
+        es, fr, de.  NOTE: These examples were shown as upper case in
+        RFC 1759 and are now shown as lower case to agree with ISO 639."
+    ::= { prtLocalizationEntry 2 }
+
+prtLocalizationCountry OBJECT-TYPE
+    -- Note: The size is fixed, was incorrectly 0..2 in RFC 1759.
+    SYNTAX     OCTET STRING (SIZE(2))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A two character country code from ISO 3166, a blank string
+        (two space characters) shall indicate that the country is not
+        defined.  Examples: US, GB, FR, DE, ..."
+    ::= { prtLocalizationEntry 3 }
+
+prtLocalizationCharacterSet OBJECT-TYPE
+    SYNTAX     IANACharset
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+      "The coded character set used for this localization."
+    ::= { prtLocalizationEntry 4 }
+
+-- The System Resources Tables
+--
+-- The Printer MIB makes use of the Host Resources MIB to
+-- define system resources by referencing the storage
+-- and device groups of the print group.
+
+prtStorageRefTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtStorageRefEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table defines which printer, amongst multiple printers
+        serviced by one agent, owns which storage units.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtGeneral 2 }
+
+prtStorageRefEntry OBJECT-TYPE
+    SYNTAX     PrtStorageRefEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table will have an entry for each entry in the Host
+        Resources MIB storage table that represents storage associated
+        with a printer managed by this agent.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX      { hrStorageIndex, prtStorageRefSeqNumber }
+    ::= { prtStorageRefTable 1 }
+
+PrtStorageRefEntry ::= SEQUENCE {
+    prtStorageRefSeqNumber  Integer32,
+    prtStorageRefIndex      Integer32
+    }
+
+prtStorageRefSeqNumber OBJECT-TYPE
+    -- NOTE: The range has been changed from RFC 1759, which allowed a
+    -- minumum value of zero.  This was incorrect, since zero is not a
+    -- valid index.
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This value will be unique amongst all entries with a common
+        value of hrStorageIndex. This object allows a storage entry to
+        point to the multiple printer devices with which it is
+        associated."
+    ::= { prtStorageRefEntry 1 }
+
+prtStorageRefIndex OBJECT-TYPE
+    -- NOTE: The range has been changed from RFC 1759 to be compatible
+    -- with the defined range of hrDeviceIndex.
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of the hrDeviceIndex of the printer device that this
+        storageEntry is associated with."
+    ::= { prtStorageRefEntry 2 }
+
+prtDeviceRefTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtDeviceRefEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table defines which printer, amongst multiple printers
+        serviced by one agent, is associated with which devices.
+
+        NOTE: The above description has been modified from RFC 1759
+
+        for clarification."
+    ::= { prtGeneral 3 }
+
+prtDeviceRefEntry OBJECT-TYPE
+    SYNTAX     PrtDeviceRefEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table will have an entry for each entry in the Host
+        Resources MIB device table that represents a device associated
+        with a printer managed by this agent.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX      { hrDeviceIndex, prtDeviceRefSeqNumber }
+    ::= { prtDeviceRefTable 1 }
+
+PrtDeviceRefEntry ::= SEQUENCE {
+    prtDeviceRefSeqNumber   Integer32,
+    prtDeviceRefIndex       Integer32
+    }
+
+prtDeviceRefSeqNumber OBJECT-TYPE
+    -- NOTE: The range has been changed from RFC 1759, which allowed a
+    -- minumum value of zero.  This was incorrect, since zero is not a
+    -- valid index.
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This value will be unique amongst all entries with a common
+        value of hrDeviceIndex. This object allows a device entry to
+        point to the multiple printer devices with which it is
+        associated."
+    ::= { prtDeviceRefEntry 1 }
+
+prtDeviceRefIndex OBJECT-TYPE
+    -- NOTE: The range has been changed from RFC 1759 to be compatible
+    -- with the defined range of hrDeviceIndex.
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of the hrDeviceIndex of the printer device that this
+        deviceEntry is associated with."
+    ::= { prtDeviceRefEntry 2 }
+
+-- The Input Group
+--
+-- Input sub-units are managed as a tabular, indexed collection
+-- of possible devices capable of providing media for input to
+-- the printing process.  Input sub-units typically have a
+-- location, a type, an identifier, a set of constraints on
+-- possible media sizes and potentially other media
+-- characteristics, and may be capable of indicating current
+-- status or capacity.
+
+prtInput   OBJECT IDENTIFIER ::= { printmib 8 }
+
+prtInputTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtInputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A table of the devices capable of providing media for input to
+        the printing process."
+    ::= { prtInput 2 }
+
+prtInputEntry OBJECT-TYPE
+    SYNTAX     PrtInputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Attributes of a device capable of providing media for input to
+        the printing process.  Entries may exist in the table for each
+        device index with a device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtInputIndex }
+    ::= { prtInputTable 1 }
+
+PrtInputEntry ::= SEQUENCE {
+    prtInputIndex                     Integer32,
+    prtInputType                      PrtInputTypeTC,
+    prtInputDimUnit                   PrtMediaUnitTC,
+    prtInputMediaDimFeedDirDeclared   Integer32,
+    prtInputMediaDimXFeedDirDeclared  Integer32,
+    prtInputMediaDimFeedDirChosen     Integer32,
+    prtInputMediaDimXFeedDirChosen    Integer32,
+    prtInputCapacityUnit              PrtCapacityUnitTC,
+    prtInputMaxCapacity               Integer32,
+    prtInputCurrentLevel              Integer32,
+    prtInputStatus                    PrtSubUnitStatusTC,
+    prtInputMediaName                 OCTET STRING,
+    prtInputName                      OCTET STRING,
+    prtInputVendorName                OCTET STRING,
+    prtInputModel                     OCTET STRING,
+    prtInputVersion                   OCTET STRING,
+    prtInputSerialNumber              OCTET STRING,
+    prtInputDescription               PrtLocalizedDescriptionStringTC,
+    prtInputSecurity                  PresentOnOff,
+    prtInputMediaWeight               Integer32,
+    prtInputMediaType                 OCTET STRING,
+    prtInputMediaColor                OCTET STRING,
+    prtInputMediaFormParts            Integer32,
+    prtInputMediaLoadTimeout          Integer32,
+    prtInputNextIndex                 Integer32
+    }
+
+prtInputIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this input
+        sub-unit.  Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new input
+        sub-units to the printer), values SHOULD remain stable across
+        successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtInputEntry 1 }
+
+prtInputType OBJECT-TYPE
+    -- NOTE: In RFC 1759, the enumeration values were implicitly
+    -- defined by this object.
+    SYNTAX     PrtInputTypeTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of technology (discriminated primarily according to
+        feeder mechanism type) employed by the input sub-unit.  Note,
+        the Input Class provides for a descriptor field to further
+        qualify the other choice."
+    ::= { prtInputEntry 2 }
+
+prtInputDimUnit OBJECT-TYPE
+    SYNTAX     PrtMediaUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit of measurement for use calculating and relaying
+         dimensional values for this input sub-unit."
+    ::= { prtInputEntry 3 }
+
+prtInputMediaDimFeedDirDeclared OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object provides the value of the declared dimension, in
+        the feed direction, of the media that is (or, if empty, was or
+        will be) in this input sub-unit.  The feed direction is the
+        direction in which the media is fed on this sub-unit.  This
+        dimension is measured in input sub-unit dimensional units
+        (controlled by prtInputDimUnit, which uses PrtMediaUnitTC).  If
+        this input sub-unit can reliably sense this value, the value is
+        sensed by the printer and may not be changed by management
+        requests.  Otherwise, the value may be changed.  The value (-1)
+        means other and specifically means that this sub-unit places no
+        restriction on this parameter.  The value (-2) indicates
+        unknown."
+    ::= { prtInputEntry 4 }
+
+prtInputMediaDimXFeedDirDeclared OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object provides the value of the declared dimension, in
+        the cross feed direction, of the media that is (or, if empty,
+        was or will be) in this input sub-unit.  The cross  feed
+        direction is ninety degrees relative to the feed direction
+        associated with this sub-unit.  This dimension is measured in
+        input sub-unit dimensional units (controlled by
+        prtInputDimUnit,which uses PrtMediaUnitTC).  If this input sub-
+        unit can reliably sense this value, the value is sensed by the
+        printer and may not be changed by management requests.
+        Otherwise, the value may be changed.  The value (-1) means other
+        and specifically means that this sub-unit places no restriction
+        on this parameter.  The value (-2) indicates unknown."
+    ::= { prtInputEntry 5 }
+
+prtInputMediaDimFeedDirChosen OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The printer will act as if media of the chosen dimension (in
+        the feed direction) is present in this input source.  Note that
+        this value will be used even if the input tray is empty.  Feed
+        dimension measurements are taken relative to the feed direction
+        associated with that sub-unit and are in input sub-unit
+        dimensional units (controlled by prtInputDimUnit, which uses
+        PrtMediaUnitTC).  If the printer supports the declared
+        dimension,the granted dimension is the same as the declared
+        dimension.  If not, the granted dimension is set to the closest
+        dimension that the printer supports when the declared dimension
+        is set.  The value (-1) means other and specifically indicates
+        that this sub-unit places no restriction on this parameter.  The
+        value (-2)indicates unknown."
+    ::= { prtInputEntry 6 }
+
+prtInputMediaDimXFeedDirChosen OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The printer will act as if media of the chosen dimension (in
+        the cross feed direction) is present in this input source.  Note
+        that this value will be used even if the input tray is empty.
+        The cross feed direction is ninety degrees relative to the feed
+        direction associated with this sub-unit.  This dimension is
+        measured in input sub-unit dimensional units (controlled by
+        prtInputDimUnit, which uses PrtMediaUnitTC).  If the printer
+        supports the declare dimension, the granted dimension is the
+        same as the declared dimension.  If not, the granted dimension
+        is set to the closest dimension that the printer supports when
+        the declared dimension is set.  The value (-1) means other and
+        specifically indicates that this sub-unit places no restriction
+        on this parameter.  The value (-2) indicates unknown."
+    ::= { prtInputEntry 7 }
+
+prtInputCapacityUnit OBJECT-TYPE
+    -- NOTE: In RFC 1759, the enumeration values were implicitly
+    -- defined by this object.
+    SYNTAX     PrtCapacityUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit of measurement for use in calculating and relaying
+        capacity values for this input sub-unit."
+    ::= { prtInputEntry 8 }
+
+prtInputMaxCapacity OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The maximum capacity of the input sub-unit in input sub-unit
+        capacity units (PrtCapacityUnitTC).  There is no convention
+        associated with the media itself so this value reflects claimed
+        capacity.  If this input sub-unit can reliably sense this value,
+        the value is sensed by the printer and may not be changed by
+        management requests; otherwise, the value may be written (by a
+        Remote Control Panel or a Management Application). The value
+        (-1) means other and specifically indicates that the sub-unit
+        places no restrictions on this parameter.  The value (-2) means
+        unknown."
+    ::= { prtInputEntry 9 }
+
+prtInputCurrentLevel OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-3..2147483647)    -- in capacity units
+                                             -- (PrtCapacityUnitTC).
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The current capacity of the input sub-unit in input sub-unit
+        capacity units (PrtCapacityUnitTC).  If this input sub-unit can
+        reliably sense this value, the value is sensed by the printer
+        and may not be changed by management requests; otherwise, the
+        value may be written (by a Remote Control Panel or a Management
+        Application).  The value (-1) means other and specifically
+        indicates that the sub-unit places no restrictions on this
+        parameter.  The value (-2) means unknown.  The value (-3) means
+        that the printer knows that at least one unit remains."
+    ::= { prtInputEntry 10 }
+
+prtInputStatus OBJECT-TYPE
+    SYNTAX     PrtSubUnitStatusTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of this input sub-unit."
+    ::= { prtInputEntry 11 }
+
+prtInputMediaName OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "A description of the media contained in this input sub-unit;
+        This description is to be used by a client to format and
+        Localize a string for display to a human operator.  This
+        description is not processed by the printer.  It is used to
+        provide information not expressible in terms of the other
+        media attributes (e.g., prtInputMediaDimFeedDirChosen,
+        prtInputMediaDimXFeedDirChosen, prtInputMediaWeight,
+        prtInputMediaType)."
+    -- The following reference was not included in RFC 1759.
+    REFERENCE
+         "The PWG Standardized Media Names specification [PWGMEDIA]
+         contains the recommended values for this object.  See also
+         RFC 3805 Appendix C,'Media Names', which lists the values
+         Of standardized media names defined in ISO/IEC 10175."
+    ::= { prtInputEntry 12 }
+
+--             INPUT MEASUREMENT
+--
+--     _______ |               |
+--      ^      |               |
+--      |      |               |                 |
+--      |      |_ _ _ _ _ _ _ _| _______________ |direction
+--      |      |               |      ^          v
+-- MaxCapacity |    Sheets     |      |
+--      |      |     left      | CurrentLevel
+--      |      |      in       |      |
+--      v      |     tray      |      v
+--     _______ +_______________+ _______
+
+-- The Extended Input Group
+
+prtInputName OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The name assigned to this input sub-unit."
+    ::= { prtInputEntry 13 }
+
+prtInputVendorName OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The vendor name of this input sub-unit."
+    ::= { prtInputEntry 14 }
+
+prtInputModel OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The model name of this input sub-unit."
+    ::= { prtInputEntry 15 }
+
+prtInputVersion OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The version of this input sub-unit."
+    ::= { prtInputEntry 16 }
+
+prtInputSerialNumber OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..32))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The serial number assigned to this input sub-unit."
+    ::= { prtInputEntry 17 }
+
+prtInputDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A free-form text description of this input sub-unit in the
+        localization specified by  prtGeneralCurrentLocalization."
+    ::= { prtInputEntry 18 }
+
+prtInputSecurity OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Indicates if this input sub-unit has some security associated
+        with it."
+    ::= { prtInputEntry 19 }
+
+-- The Input Media Group
+--
+-- The Input Media Group supports identification of media
+-- installed or available for use on a printing device.
+
+-- Medium resources are identified by name, and include a
+-- collection of characteristic attributes that may further be
+-- used for selection and management of them.
+-- The Input Media group consists of a set of optional
+-- "columns" in the Input Table.  In this manner, a minimally
+-- conforming implementation may choose to not support reporting
+-- of media resources if it cannot do so.
+
+prtInputMediaWeight  OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The weight of the medium associated with this input sub-unit
+        in grams / per meter squared.  The value (-2) means unknown."
+    ::= { prtInputEntry 20 }
+
+prtInputMediaType OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The name of the type of medium associated with this input sub
+        unit.  This name need not be processed by the printer; it might
+        simply be displayed to an operator.
+
+        NOTE: The above description has been modified from RFC 1759."
+    -- The following reference was not included in RFC 1759.
+    REFERENCE
+        "The PWG Standardized Media Names specification [PWGMEDIA],
+        section 3 Media Type Names, contains the recommended values for
+        this object.  Implementers may add additional string values.
+        The naming conventions in ISO 9070 are recommended in order to
+        avoid potential name clashes."
+    ::= { prtInputEntry 21 }
+
+prtInputMediaColor OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The name of the color of the medium associated with
+        this input sub-unit using standardized string values.
+
+        NOTE: The above description has been modified from RFC 1759."
+    -- The following reference was not included in RFC 1759.
+    REFERENCE
+        "The PWG Standardized Media Names specification [PWGMEDIA],
+        section 4 Media Color Names, contains the recommended values
+        for this object.  Implementers may add additional string values.
+        The naming conventions in ISO 9070 are recommended in order to
+        avoid potential name clashes."
+    ::= { prtInputEntry 22 }
+
+prtInputMediaFormParts OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The number of parts associated with the medium
+        associated with this input sub-unit if the medium is a
+        multi-part form.  The value (-1) means other and
+        specifically indicates that the device places no
+        restrictions on this parameter.  The value (-2) means
+        unknown."
+    ::= { prtInputEntry 23 }
+
+-- The Input Switching Group
+--
+-- The input switching group allows the administrator to set the
+-- input subunit time-out for the printer and to control the
+-- automatic input subunit switching by the printer when an input
+-- subunit becomes empty.
+
+prtInputMediaLoadTimeout OBJECT-TYPE
+   SYNTAX     Integer32 (-2..2147483647)
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+        "When the printer is not able to print due to a subunit being
+        empty or the requested media must be manually loaded, the
+        printer will wait for the duration (in seconds) specified by
+        this object.  Upon expiration of the time-out, the printer will
+        take the action specified by prtInputNextIndex.
+
+        The event which causes the printer to enter the waiting state
+        is product specific.  If the printer is not waiting for manually
+        fed media, it may switch from an empty subunit to a different
+        subunit without waiting for the time-out to expire.
+
+        A value of (-1) implies 'other' or 'infinite' which translates
+        to 'wait forever'.  The action which causes printing to continue
+        is product specific.  A value of (-2) implies 'unknown'."
+   ::= { prtInputEntry 24 }
+
+prtInputNextIndex OBJECT-TYPE
+   SYNTAX     Integer32 (-3..2147483647)
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+        "The value of prtInputIndex corresponding to the input subunit
+        which will be used when this input subunit is emptied and the
+        time-out specified by prtInputMediaLoadTimeout expires.  A value
+        of zero(0) indicates that auto input switching will not occur
+        when this input subunit is emptied.  If the time-out specified
+        by prtInputLoadMediaTimeout expires and this value is zero(0),
+        the job will be aborted.  A value of (-1) means other.  The
+        value (-2)means 'unknown' and specifically indicates that an
+        implementation specific method will determine the next input
+        subunit to use at the time this subunit is emptied and the time
+        out expires.  The value(-3) means input switching is not
+        supported for this subunit."
+   ::= { prtInputEntry 25 }
+
+-- The Output Group
+--
+-- Output sub-units are managed as a tabular, indexed collection
+-- of possible devices capable of receiving media delivered from
+-- the printing process.  Output sub-units typically have a
+-- location, a type, an identifier, a set of constraints on
+-- possible media sizes and potentially other characteristics,
+-- and may be capable of indicating current status or capacity.
+
+prtOutput  OBJECT IDENTIFIER ::= { printmib 9 }
+
+prtOutputTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtOutputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A table of the devices capable of receiving media delivered
+        from the printing process."
+    ::= { prtOutput 2 }
+
+prtOutputEntry OBJECT-TYPE
+    SYNTAX     PrtOutputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Attributes of a device capable of receiving media delivered
+        from the printing process.  Entries may exist in the table for
+        each device index with a device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+   INDEX  { hrDeviceIndex, prtOutputIndex }
+    ::= { prtOutputTable 1 }
+
+PrtOutputEntry ::= SEQUENCE {
+    prtOutputIndex                    Integer32,
+    prtOutputType                     PrtOutputTypeTC,
+    prtOutputCapacityUnit             PrtCapacityUnitTC,
+    prtOutputMaxCapacity              Integer32,
+    prtOutputRemainingCapacity        Integer32,
+    prtOutputStatus                   PrtSubUnitStatusTC,
+    prtOutputName                     OCTET STRING,
+    prtOutputVendorName               OCTET STRING,
+    prtOutputModel                    OCTET STRING,
+    prtOutputVersion                  OCTET STRING,
+    prtOutputSerialNumber             OCTET STRING,
+    prtOutputDescription              PrtLocalizedDescriptionStringTC,
+    prtOutputSecurity                 PresentOnOff,
+    prtOutputDimUnit                  PrtMediaUnitTC,
+    prtOutputMaxDimFeedDir            Integer32,
+    prtOutputMaxDimXFeedDir           Integer32,
+    prtOutputMinDimFeedDir            Integer32,
+    prtOutputMinDimXFeedDir           Integer32,
+    prtOutputStackingOrder        PrtOutputStackingOrderTC,
+    prtOutputPageDeliveryOrientation
+                        PrtOutputPageDeliveryOrientationTC,
+    prtOutputBursting                 PresentOnOff,
+    prtOutputDecollating              PresentOnOff,
+    prtOutputPageCollated             PresentOnOff,
+    prtOutputOffsetStacking           PresentOnOff
+    }
+
+prtOutputIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by this printer to identify this output
+        sub-unit.  Although these values may change due to a major
+        reconfiguration of the sub-unit (e.g., the addition of new
+        output devices to the printer), values SHOULD remain stable
+        across successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtOutputEntry 1 }
+
+prtOutputType OBJECT-TYPE
+    -- NOTE: In RFC 1759, the enumeration values were implicitly defined
+    -- by this object.
+    SYNTAX     PrtOutputTypeTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of technology supported by this output sub-unit."
+    ::= { prtOutputEntry 2 }
+
+prtOutputCapacityUnit OBJECT-TYPE
+    SYNTAX     PrtCapacityUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit of measurement for use in calculating and relaying
+        capacity values for this output sub-unit."
+    ::= { prtOutputEntry 3 }
+
+prtOutputMaxCapacity OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The maximum capacity of this output sub-unit in output sub-
+        unit capacity units (PrtCapacityUnitTC).  There is no convention
+        associated with the media itself so this value essentially
+        reflects claimed capacity.  If this output sub-unit can reliably
+        sense this value, the value is sensed by the printer and may
+        not be changed by management requests; otherwise, the value may
+        be written (by a Remote Control Panel or a Management
+        Application).  The value (-1) means other and specifically
+        indicates that the sub-unit places no restrictions on this
+        parameter.  The value (-2) means unknown."
+    ::= { prtOutputEntry 4 }
+
+prtOutputRemainingCapacity OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-3..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The remaining capacity of the possible output sub-unit
+        capacity in output sub-unit capacity units
+        (PrtCapacityUnitTC)of this output sub-unit.  If this output sub-
+        unit can reliably sense this value, the value is sensed by the
+        printer and may not be modified by management requests;
+
+        otherwise, the value may be written (by a Remote Control Panel
+        or a Management Application).  The value (-1) means other and
+        specifically indicates that the sub-unit places no restrictions
+        on this parameter.  The value (-2) means unknown.  The value
+        (-3) means that the printer knows that there remains capacity
+        for at least one unit."
+    ::= { prtOutputEntry 5 }
+
+prtOutputStatus OBJECT-TYPE
+    SYNTAX     PrtSubUnitStatusTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of this output sub-unit."
+    ::= { prtOutputEntry 6 }
+
+--            OUTPUT MEASUREMENT
+--
+--   _______  |                | ________
+--      ^     |                |     ^
+--      |     |                |     |
+--      |     |                |RemainingCapacity
+-- MaxCapacity|                |     |
+--      |     |                |     v           ^
+--      |     |_ _ _ _ _ _ _ _ | _______________ |direction
+--      |     |    Sheets      |                 |
+--      |     |      in        |
+--      v     |    Output      |
+--   _______  +________________+
+
+-- The Extended Output Group
+
+prtOutputName OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The name assigned to this output sub-unit."
+    ::= { prtOutputEntry 7 }
+
+prtOutputVendorName OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The vendor name of this output sub-unit."
+    ::= { prtOutputEntry 8 }
+
+prtOutputModel OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The model name assigned to this output sub-unit.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtOutputEntry 9 }
+
+prtOutputVersion OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The version of this output sub-unit."
+    ::= { prtOutputEntry 10 }
+
+prtOutputSerialNumber OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The serial number assigned to this output sub-unit."
+    ::= { prtOutputEntry 11 }
+
+prtOutputDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A free-form text description of this output sub-unit in the
+        localization specified by prtGeneralCurrentLocalization."
+    ::= { prtOutputEntry 12 }
+
+prtOutputSecurity OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Indicates if this output sub-unit has some security associated
+        with it and if that security is enabled or not."
+    ::= { prtOutputEntry 13 }
+
+-- The Output Dimensions Group
+
+prtOutputDimUnit OBJECT-TYPE
+    SYNTAX     PrtMediaUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit of measurement for use in calculating and relaying
+        dimensional values for this output sub-unit."
+    ::= { prtOutputEntry 14 }
+
+prtOutputMaxDimFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The maximum dimensions supported by this output sub-unit
+        for measurements taken parallel relative to the feed
+        direction associated with that sub-unit in output
+        sub-unit dimensional units (controlled by prtOutputDimUnit,
+        which uses PrtMediaUnitTC).  If this output sub-unit can
+        reliably sense this value, the value is sensed by the printer
+        and may not be changed with management protocol operations.
+        The value (-1) means other and specifically indicates that the
+        sub-unit places no restrictions on this parameter.  The value
+        (-2) means unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification and to explain the purpose of (-1) and (-2)."
+    ::= { prtOutputEntry 15 }
+
+prtOutputMaxDimXFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The maximum dimensions supported by this output sub-unit
+        for measurements taken ninety degrees relative to the
+        feed direction associated with that sub-unit in output
+        sub-unit dimensional units (controlled by prtOutputDimUnit,
+        which uses PrtMediaUnitTC).  If this output sub-unit can
+        reliably sense this value, the value is sensed by the printer
+        and may not be changed with management protocol operations.
+        The value (-1) means other and specifically indicates that the
+        sub-unit places no restrictions on this parameter.  The value
+        (-2) means unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification and to explain the purpose of (-1) and (-2)."
+    ::= { prtOutputEntry 16 }
+
+prtOutputMinDimFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The minimum dimensions supported by this output sub-unit
+        for measurements taken parallel relative to the feed
+        direction associated with that sub-unit in output
+        sub-unit dimensional units (controlled by prtOutputDimUnit,
+        which uses PrtMediaUnitTC).  If this output sub-unit can
+        reliably sense this value, the value is sensed by the printer
+        and may not be changed with management protocol operations.
+        The value (-1) means other and specifically indicates that the
+        sub-unit places no restrictions on this parameter.  The value
+        (-2) means unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification and to explain the purpose of (-1) and (-2)."
+    ::= { prtOutputEntry 17 }
+
+prtOutputMinDimXFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The minimum dimensions supported by this output sub-unit
+        for measurements taken ninety degrees relative to the
+        feed direction associated with that sub-unit in output
+        sub-unit dimensional units (controlled by prtOutputDimUnit,
+        which uses PrtMediaUnitTC).  If this output sub-unit can
+        reliably sense this value, the value is sensed by the printer
+        and may not be changed with management protocol operations.
+        The value (-1) means other and specifically indicates that the
+        sub-unit places no restrictions on this parameter.  The value
+        (-2) means unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification and to explain the purpose of (-1) and (-2)."
+    ::= { prtOutputEntry 18 }
+
+-- The Output Features Group
+
+prtOutputStackingOrder OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtOutputStackingOrderTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The current state of the stacking order for the
+        associated output sub-unit. 'FirstToLast' means
+        that as pages are output the front of the next page is
+        placed against the back of the previous page.
+        'LasttoFirst' means that as pages are output the back
+        of the next page is placed against the front of the
+        previous page."
+    ::= { prtOutputEntry 19 }
+
+prtOutputPageDeliveryOrientation OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtOutputPageDeliveryOrientationTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The reading surface that will be 'up' when pages are
+        delivered to the associated output sub-unit.  Values are
+        faceUp and faceDown.  (Note: interpretation of these
+        values is in general context-dependent based on locale;
+        presentation of these values to an end-user should be
+        normalized to the expectations of the user)."
+    ::= { prtOutputEntry 20 }
+
+prtOutputBursting OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object indicates that the outputting sub-unit supports
+        bursting, and if so, whether the feature is enabled.  Bursting
+        is the process by which continuous media is separated into
+        individual sheets, typically by bursting along pre-formed
+        perforations."
+    ::= { prtOutputEntry 21 }
+
+prtOutputDecollating OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object indicates that the output supports decollating,
+        and if so, whether the feature is enabled.  Decollating is the
+        process by which the individual parts within a multi-part form
+        are separated and sorted into separate stacks for each part."
+    ::= { prtOutputEntry 22 }
+
+prtOutputPageCollated OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object indicates that the output sub-unit supports page
+        collation, and if so, whether the feature is enabled.  See RFC
+        3805 Appendix A, Glossary Of Terms, for definition of how this
+        document defines collation.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtOutputEntry 23 }
+
+prtOutputOffsetStacking OBJECT-TYPE
+    SYNTAX     PresentOnOff
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object indicates that the output supports offset
+        stacking,and if so, whether the feature is enabled.  See RFC
+        3805 Appendix A, Glossary Of Terms,  for how Offset Stacking is
+        defined by this document.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtOutputEntry 24 }
+
+-- The Marker Group
+--
+-- A marker is the mechanism that produces marks on the print
+-- media.  The marker sub-units and their associated supplies are
+-- represented by the Marker Group in the model.  A printer can
+-- contain one or more marking mechanisms.  Some examples of
+-- multiple marker sub-units are: a printer
+-- with separate markers for normal and magnetic ink or an
+-- imagesetter that can output to both a proofing device and
+-- final film.  Each marking device can have its own set of
+-- characteristics associated with it, such as marking technology
+-- and resolution.
+
+prtMarker OBJECT IDENTIFIER ::= { printmib 10 }
+
+-- The printable area margins as listed below define an area of
+-- the print media which is guaranteed to be printable for all
+-- combinations of input, media paths, and interpreters for this
+-- marker.
+
+prtMarkerTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtMarkerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The marker table provides a description of each marker
+        sub-unit contained within the printer.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarker 2 }
+
+prtMarkerEntry OBJECT-TYPE
+    SYNTAX     PrtMarkerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entries in this table define the characteristics and status
+        of each marker sub-unit in the printer.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtMarkerIndex }
+    ::= { prtMarkerTable 1 }
+
+PrtMarkerEntry ::= SEQUENCE {
+    prtMarkerIndex                  Integer32,
+    prtMarkerMarkTech               PrtMarkerMarkTechTC,
+    prtMarkerCounterUnit            PrtMarkerCounterUnitTC,
+    prtMarkerLifeCount              Counter32,
+    prtMarkerPowerOnCount           Counter32,
+    prtMarkerProcessColorants       Integer32,
+    prtMarkerSpotColorants          Integer32,
+    prtMarkerAddressabilityUnit     PrtMarkerAddressabilityUnitTC,
+    prtMarkerAddressabilityFeedDir  Integer32,
+    prtMarkerAddressabilityXFeedDir Integer32,
+    prtMarkerNorthMargin            Integer32,
+    prtMarkerSouthMargin            Integer32,
+    prtMarkerWestMargin             Integer32,
+    prtMarkerEastMargin             Integer32,
+    prtMarkerStatus                 PrtSubUnitStatusTC
+
+    }
+
+prtMarkerIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this marking
+        SubUnit.  Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new marking
+        sub-units to the printer), values SHOULD remain stable across
+        successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerEntry 1 }
+
+prtMarkerMarkTech OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerMarkTechTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of marking technology used for this marking
+        sub-unit."
+    ::= { prtMarkerEntry 2 }
+
+prtMarkerCounterUnit OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerCounterUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit that will be used by the printer when reporting
+        counter values for this marking sub-unit.  The time units of
+        measure are provided for a device like a strip recorder that
+        does not or cannot track the physical dimensions of the media
+        and does not use characters, lines or sheets."
+    ::= { prtMarkerEntry 3 }
+
+prtMarkerLifeCount OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The count of the number of units of measure counted during the
+
+        life of printer using units of measure as specified by
+        prtMarkerCounterUnit.
+
+        Note: This object should be implemented as a persistent object
+        with a reliable value throughout the lifetime of the printer."
+    ::= { prtMarkerEntry 4 }
+
+prtMarkerPowerOnCount OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The count of the number of units of measure counted since the
+        equipment was most recently powered on using units of measure
+        as specified by prtMarkerCounterUnit."
+    ::= { prtMarkerEntry 5 }
+
+prtMarkerProcessColorants OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of process colors supported by this marker.  A
+        process color of 1 implies monochrome.  The value of this
+        object and prtMarkerSpotColorants cannot both be 0.  The value
+        of prtMarkerProcessColorants must be 0 or greater.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerEntry 6 }
+
+prtMarkerSpotColorants OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of spot colors supported by this marker.  The value
+        of this object and prtMarkerProcessColorants cannot both be 0.
+        Must be 0 or greater.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerEntry 7 }
+
+prtMarkerAddressabilityUnit OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerAddressabilityUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit of measure of distances, as applied to the marker's
+        resolution.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerEntry 8 }
+
+prtMarkerAddressabilityFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of addressable marking positions in the
+        feed direction per 10000 units of measure specified by
+        prtMarkerAddressabilityUnit.  A value of (-1) implies 'other'
+        or 'infinite' while a value of (-2) implies 'unknown'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerEntry 9 }
+
+prtMarkerAddressabilityXFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of addressable marking positions in the
+        cross feed direction in 10000 units of measure specified by
+        prtMarkerAddressabilityUnit.  A value of (-1) implies 'other'
+        or 'infinite' while a value of (-2) implies 'unknown'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerEntry 10 }
+
+prtMarkerNorthMargin OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The margin, in units identified by prtMarkerAddressabilityUnit,
+        from the leading edge of the medium as the medium flows through
+
+        the marking engine with the side to be imaged facing the
+        observer.  The leading edge is the North edge and the other
+        edges are defined by the normal compass layout of  directions
+        with the compass facing the observer.  Printing within the area
+        bounded by all four margins is guaranteed for all interpreters.
+        The value (-2) means unknown."
+    ::= { prtMarkerEntry 11 }
+
+prtMarkerSouthMargin OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The margin from the South edge  (see prtMarkerNorthMargin) of
+        the medium in units identified by prtMarkerAddressabilityUnit.
+        Printing within the area bounded by all four margins  is
+        guaranteed for all interpreters.  The value (-2) means unknown."
+    ::= { prtMarkerEntry 12 }
+
+prtMarkerWestMargin OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The margin from the West edge (see prtMarkerNorthMargin) of
+        the medium in units identified by prtMarkerAddressabilityUnit.
+        Printing within the area bounded by all four margins is
+        guaranteed for all interpreters.  The value (-2) means unknown."
+    ::= { prtMarkerEntry 13 }
+
+prtMarkerEastMargin OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The margin from the East edge (see prtMarkerNorthMargin) of
+        the medium in units identified by prtMarkerAddressabilityUnit.
+        Printing within the area bounded by all four margins is
+        guaranteed for all interpreters.  The value (-2) means unknown."
+    ::= { prtMarkerEntry 14 }
+
+prtMarkerStatus OBJECT-TYPE
+    SYNTAX     PrtSubUnitStatusTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of this marker sub-unit."
+    ::= { prtMarkerEntry 15 }
+
+-- The Marker Supplies Group
+
+prtMarkerSupplies OBJECT IDENTIFIER ::= { printmib 11 }
+
+prtMarkerSuppliesTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtMarkerSuppliesEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A table of the marker supplies available on this printer."
+    ::= { prtMarkerSupplies 1 }
+
+prtMarkerSuppliesEntry OBJECT-TYPE
+    SYNTAX     PrtMarkerSuppliesEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Attributes of a marker supply.  Entries may exist in the table
+        for each device index with a device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtMarkerSuppliesIndex }
+    ::= { prtMarkerSuppliesTable 1 }
+PrtMarkerSuppliesEntry ::= SEQUENCE {
+    prtMarkerSuppliesIndex          Integer32,
+    prtMarkerSuppliesMarkerIndex    Integer32,
+    prtMarkerSuppliesColorantIndex  Integer32,
+    prtMarkerSuppliesClass          PrtMarkerSuppliesClassTC,
+    prtMarkerSuppliesType           PrtMarkerSuppliesTypeTC,
+    prtMarkerSuppliesDescription    PrtLocalizedDescriptionStringTC,
+    prtMarkerSuppliesSupplyUnit     PrtMarkerSuppliesSupplyUnitTC,
+    prtMarkerSuppliesMaxCapacity    Integer32,
+    prtMarkerSuppliesLevel          Integer32
+    }
+
+prtMarkerSuppliesIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this marker
+        supply.  Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new marker
+
+        supplies to the printer), values SHOULD remain stable across
+        successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerSuppliesEntry 1 }
+
+prtMarkerSuppliesMarkerIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of prtMarkerIndex corresponding to the marking sub
+        unit with which this marker supply sub-unit is associated."
+    ::= { prtMarkerSuppliesEntry 2 }
+
+prtMarkerSuppliesColorantIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of prtMarkerColorantIndex corresponding to the
+        colorant with which this marker supply sub-unit is associated.
+        This value shall be 0 if there is no colorant table or if this
+        supply does not depend on a single specified colorant.
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerSuppliesEntry 3 }
+
+prtMarkerSuppliesClass OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerSuppliesClassTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Indicates whether this supply entity represents a supply that
+        is consumed or a receptacle that is filled.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerSuppliesEntry 4 }
+
+prtMarkerSuppliesType OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerSuppliesTypeTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this supply."
+    ::= { prtMarkerSuppliesEntry 5 }
+
+prtMarkerSuppliesDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The description of this supply container/receptacle in the
+        localization specified by prtGeneralCurrentLocalization."
+    ::= { prtMarkerSuppliesEntry 6 }
+
+prtMarkerSuppliesSupplyUnit OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerSuppliesSupplyUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Unit of measure of this marker supply container/receptacle.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerSuppliesEntry 7 }
+
+prtMarkerSuppliesMaxCapacity OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The maximum capacity of this supply container/receptacle
+        expressed in prtMarkerSuppliesSupplyUnit.  If this supply
+        container/receptacle can reliably sense this value, the value
+        is reported by the printer and is read-only; otherwise, the
+        value may be written (by a Remote Control Panel or a Management
+        Application).  The value (-1) means other and specifically
+        indicates that the sub-unit places no restrictions on this
+        parameter.  The value (-2) means unknown."
+    ::= { prtMarkerSuppliesEntry 8 }
+
+prtMarkerSuppliesLevel OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-3..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The current level if this supply is a container; the remaining
+        space if this supply is a receptacle.  If this supply
+        container/receptacle can reliably sense this value, the value
+        is reported by the printer and is read-only; otherwise, the
+        value may be written (by a Remote Control Panel or a Management
+        Application).  The value (-1) means other and specifically
+        indicates that the sub-unit places no restrictions on this
+        parameter.  The value (-2) means unknown.  A value of (-3) means
+        that the printer knows that there is some supply/remaining
+        space, respectively."
+    ::= { prtMarkerSuppliesEntry 9 }
+
+-- The Marker Colorant Group
+
+prtMarkerColorant OBJECT IDENTIFIER ::= { printmib 12 }
+
+prtMarkerColorantTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtMarkerColorantEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A table of all of the colorants available on the printer."
+    ::= { prtMarkerColorant 1 }
+
+prtMarkerColorantEntry OBJECT-TYPE
+    SYNTAX     PrtMarkerColorantEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Attributes of a colorant available on the printer.  Entries may
+        exist in the table for each device index with a device type of
+        'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX { hrDeviceIndex, prtMarkerColorantIndex }
+    ::= { prtMarkerColorantTable 1 }
+
+PrtMarkerColorantEntry ::= SEQUENCE {
+    prtMarkerColorantIndex          Integer32,
+    prtMarkerColorantMarkerIndex    Integer32,
+    prtMarkerColorantRole           PrtMarkerColorantRoleTC,
+    prtMarkerColorantValue          OCTET STRING,
+    prtMarkerColorantTonality       Integer32
+    }
+
+prtMarkerColorantIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this colorant.
+        Although these values may change due to a major reconfiguration
+        of the device (e.g., the addition of new colorants to the
+        printer) , values SHOULD remain stable across successive
+        printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMarkerColorantEntry 1 }
+
+prtMarkerColorantMarkerIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of prtMarkerIndex corresponding to the marker sub
+        unit with which this colorant entry is associated."
+    ::= { prtMarkerColorantEntry 2 }
+
+prtMarkerColorantRole OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMarkerColorantRoleTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The role played by this colorant."
+    ::= { prtMarkerColorantEntry 3 }
+
+prtMarkerColorantValue OBJECT-TYPE
+    -- NOTE: The string length range has been increased from RFC 1759.
+    SYNTAX     OCTET STRING (SIZE(0..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The name of the color of this colorant using standardized
+        string names from ISO 10175 (DPA) and ISO 10180 (SPDL) such as:
+            other
+            unknown
+            white
+            red
+            green
+            blue
+
+            cyan
+            magenta
+            yellow
+            black
+        Implementers may add additional string values.  The naming
+        conventions in ISO 9070 are recommended in order to avoid
+        potential name clashes"
+    ::= { prtMarkerColorantEntry 4 }
+
+prtMarkerColorantTonality OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The distinct levels of tonality realizable by a marking sub
+        unit when using this colorant.  This value does not include the
+        number of levels of tonal difference that an interpreter can
+        obtain by techniques such as half toning.  This value must be at
+        least 2."
+    ::= { prtMarkerColorantEntry 5 }
+
+-- The Media Path Group
+--
+-- The media paths encompass the mechanisms in the printer that
+-- move the media through the printer and connect all other media
+-- related sub-units: inputs, outputs, markers and finishers.  A
+-- printer contains one or more media paths.  These are
+-- represented by the Media Path Group in the model.
+
+prtMediaPath OBJECT IDENTIFIER ::= { printmib 13 }
+
+prtMediaPathTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtMediaPathEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The media path table includes both physical and logical paths
+        within the printer.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMediaPath 4 }
+
+prtMediaPathEntry OBJECT-TYPE
+    SYNTAX     PrtMediaPathEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entries may exist in the table for each device index with a
+        device type of 'printer'  Each entry defines the physical
+        characteristics of and the status of the media path.  The data
+        provided indicates the maximum throughput and the media
+        size limitations of these subunits.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtMediaPathIndex }
+    ::= { prtMediaPathTable 1 }
+
+PrtMediaPathEntry ::= SEQUENCE {
+    prtMediaPathIndex               Integer32,
+    prtMediaPathMaxSpeedPrintUnit   PrtMediaPathMaxSpeedPrintUnitTC,
+    prtMediaPathMediaSizeUnit       PrtMediaUnitTC,
+    prtMediaPathMaxSpeed            Integer32,
+    prtMediaPathMaxMediaFeedDir     Integer32,
+    prtMediaPathMaxMediaXFeedDir    Integer32,
+    prtMediaPathMinMediaFeedDir     Integer32,
+    prtMediaPathMinMediaXFeedDir    Integer32,
+    prtMediaPathType                PrtMediaPathTypeTC,
+    prtMediaPathDescription         PrtLocalizedDescriptionStringTC,
+    prtMediaPathStatus              PrtSubUnitStatusTC
+    }
+
+prtMediaPathIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this media
+        path.  Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new media
+        paths to the printer), values SHOULD remain stable across
+        successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMediaPathEntry 1 }
+
+prtMediaPathMaxSpeedPrintUnit OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX PrtMediaPathMaxSpeedPrintUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The unit of measure used in specifying the speed of all media
+        paths in the printer."
+    ::= { prtMediaPathEntry 2 }
+
+prtMediaPathMediaSizeUnit OBJECT-TYPE
+    SYNTAX     PrtMediaUnitTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The units of measure of media size for use in calculating and
+        relaying dimensional values for all media paths in the
+        printer."
+    ::= { prtMediaPathEntry 3 }
+
+prtMediaPathMaxSpeed OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum printing speed of this media path expressed in
+        prtMediaPathMaxSpeedUnit's.  A value of (-1) implies 'other'."
+    ::= { prtMediaPathEntry 4 }
+
+prtMediaPathMaxMediaFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum physical media size in the feed direction of this
+        media path expressed in units of measure specified by
+        PrtMediaPathMediaSizeUnit.  A value of (-1) implies 'unlimited'
+        a value of (-2) implies 'unknown'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMediaPathEntry 5 }
+
+prtMediaPathMaxMediaXFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum physical media size across the feed direction of
+        this media path expressed in units of measure specified by
+        prtMediaPathMediaSizeUnit.  A value of (-2) implies 'unknown'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMediaPathEntry 6 }
+
+prtMediaPathMinMediaFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The minimum physical media size in the feed direction of this
+        media path expressed in units of measure specified by
+        prtMediaPathMediaSizeUnit.  A value of (-2) implies 'unknown'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMediaPathEntry 7 }
+
+prtMediaPathMinMediaXFeedDir OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The minimum physical media size across the feed direction of
+        this media path expressed in units of measure specified by
+        prtMediaPathMediaSizeUnit.  A value of (-2) implies 'unknown'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtMediaPathEntry 8 }
+
+prtMediaPathType OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtMediaPathTypeTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of the media path for this media path."
+    ::= { prtMediaPathEntry 9 }
+
+prtMediaPathDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The manufacturer-provided description of this media path in
+        the localization specified by prtGeneralCurrentLocalization."
+    ::= { prtMediaPathEntry 10 }
+
+prtMediaPathStatus OBJECT-TYPE
+    SYNTAX     PrtSubUnitStatusTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+         "The current status of this media path."
+    ::= { prtMediaPathEntry 11 }
+
+-- The Print Job Delivery Channel Group
+--
+-- Print Job Delivery Channels are independent sources of print
+-- data.  Here, print data is the term used for the information
+-- that is used to construct printed pages and may have both data
+-- and control aspects.  The output of a channel is in a form
+-- suitable for input to one of the interpreters as a
+-- stream.  A channel may be independently enabled (allowing
+-- print data to flow) or disabled (stopping the flow of
+-- print data).  A printer may have one or more channels.
+--
+-- The Print Job Delivery Channel table describes the
+-- capabilities of the printer and not what is currently being
+-- performed by the printer
+--
+-- Basically, the print job delivery channel abstraction
+-- describes the final processing step of getting the print data
+-- to an interpreter.  It might include some level of
+-- decompression or decoding of print stream data.
+-- channel.  All of these aspects are hidden in the channel
+-- abstraction.
+--
+-- There are many kinds of print job delivery channels; some of
+-- which are based on networks and others which are not.  For
+-- example, a channel can be a serial (or parallel) connection;
+-- it can be a service, such as the UNIX Line Printer Daemon
+-- (LPD), offering services over a network connection; or
+-- it could be a disk drive into which a floppy disk with
+-- the print data is inserted.  Each print job delivery channel is
+-- identified by the electronic path and/or service protocol
+-- used to deliver print data to a print data interpreter.
+--
+-- Channel example                   Implementation
+--
+-- serial port channel            bi-directional data channel
+
+-- parallel port channel          often uni-directional channel
+-- IEEE 1284 port channel         bi-directional channel
+-- SCSI port channel              bi-directional
+-- Apple PAP channel              may be based on LocalTalk,
+--                                Ethernet or Tokentalk
+-- LPD Server channel             TCP/IP based, port 515
+-- Netware Remote Printer         SPX/IPX based channel
+-- Netware Print Server           SPX/IPX based channel
+--
+-- It is easy to note that this is a mixed bag.  There are
+-- some physical connections over which no (or very meager)
+-- protocols are run (e.g., the serial or old parallel ports)
+-- and there are services which often have elaborate
+-- protocols that run over a number of protocol stacks.  In
+-- the end, what is important is the delivery of print data
+-- through the channel.
+--
+-- The print job delivery channel sub-units are represented by
+-- the Print Job Delivery Channel Group in the Model.  It has a
+-- current print job control language, which can be used to
+-- specify which interpreter is to be used for the print data and
+-- to query and change environment variables used by the
+-- interpreters (and Management Applications).  There is also a
+-- default interpreter that is to be used if an interpreter is
+-- not explicitly specified using the Control Language.
+
+-- The first seven items in the Print Job Delivery Channel Table
+-- define the "channel" itself.  A channel typically depends on
+-- other protocols and interfaces to provide the data that flows
+-- through the channel.
+--
+-- Control of a print job delivery channel is largely limited to
+-- enabling or disabling the entire channel itself.  It is likely
+-- that more control of the process of accessing print data
+-- will be needed over time.  Thus, the ChannelType will
+-- allow type-specific data to be associated with each
+-- channel (using ChannelType specific groups in a fashion
+-- analogous to the media specific MIBs that are associated
+-- with the IANAIfType in the Interfaces Table).  As a first
+-- step in this direction, each channel will identify the
+-- underlying Interface on which it is based.  This is the
+-- eighth object in each row of the table.
+
+-- The Print Job Delivery Channel Table
+
+prtChannel OBJECT IDENTIFIER ::= { printmib 14 }
+
+prtChannelTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtChannelEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The channel table represents the set of input data sources
+        which can provide print data to one or more of the
+        interpreters available on a printer.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtChannel 1 }
+
+prtChannelEntry OBJECT-TYPE
+    SYNTAX     PrtChannelEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entries may exist in the table for each device index with a
+        device type of 'printer'.  Each channel table entry is
+        characterized by a unique protocol stack and/or addressing.
+        The channel may also have printer dependent features that are
+        associated with a printing language.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtChannelIndex }
+    ::= { prtChannelTable 1 }
+
+PrtChannelEntry ::= SEQUENCE {
+    prtChannelIndex                     Integer32,
+    prtChannelType                      PrtChannelTypeTC,
+    prtChannelProtocolVersion           OCTET STRING,
+    prtChannelCurrentJobCntlLangIndex   Integer32,
+    prtChannelDefaultPageDescLangIndex  Integer32,
+    prtChannelState                     PrtChannelStateTC,
+    prtChannelIfIndex                   InterfaceIndexOrZero,
+    prtChannelStatus                    PrtSubUnitStatusTC,
+    prtChannelInformation               OCTET STRING
+    }
+
+prtChannelIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this data
+        channel.  Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new data
+        channels to the printer), values SHOULD remain stable across
+        successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtChannelEntry 1 }
+
+prtChannelType OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtChannelTypeTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this print data channel.  This object provides the
+        linkage to ChannelType-specific groups that may (conceptually)
+        extend the prtChannelTable with additional details about that
+        channel."
+    ::= { prtChannelEntry 2 }
+
+prtChannelProtocolVersion OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The version of the protocol used on this channel.  The format
+        used for version numbering depends on prtChannelType."
+    ::= { prtChannelEntry 3 }
+
+prtChannelCurrentJobCntlLangIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of prtInterpreterIndex corresponding to the Control
+        Language Interpreter for this channel.  This interpreter defines
+        the syntax used for control functions, such as querying or
+        changing environment variables and identifying job boundaries
+        (e.g., PJL, PostScript, NPAP).  A value of zero indicates that
+        there is no current Job Control Language Interpreter for this
+        channel.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtChannelEntry 4 }
+
+prtChannelDefaultPageDescLangIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of prtInterpreterIndex corresponding to the Page
+        Description Language Interpreter for this channel.  This
+        interpreter defines the default Page Description Language
+        interpreter to be used for the print data unless the Control
+        Language is used to select a specific interpreter (e.g., PCL,
+        PostScript Language, auto-sense).  A value of zero indicates
+        that there is no default page description language interpreter
+        for this channel.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtChannelEntry 5 }
+
+prtChannelState OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtChannelStateTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The state of this print data channel.  The value determines
+        whether control information and print data is allowed through
+        this channel or not."
+    ::= { prtChannelEntry 6 }
+
+prtChannelIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero   -- Was Integer32 in RFC 1759.
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The value of ifIndex in the ifTable; see the Interfaces Group
+        MIB [RFC2863] which corresponds to this channel.
+        When more than one row of the ifTable is relevant, this is the
+        index of the row representing the topmost layer in the
+        interface hierarchy.  A value of zero indicates that no
+        interface is associated with this channel.
+
+        NOTE: The above description has been modified from RFC 1759
+
+        for clarification."
+    ::= { prtChannelEntry 7 }
+
+prtChannelStatus OBJECT-TYPE
+    SYNTAX     PrtSubUnitStatusTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of the channel."
+    ::= { prtChannelEntry 8 }
+
+prtChannelInformation OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Auxiliary information to allow a printing application to use
+        the channel for data submission to the printer.  An application
+        capable of using a specific PrtChannelType should be able to
+        use the combined information from the prtChannelInformation and
+        other channel and interface group objects to 'bootstrap' its
+        use of the channel.  prtChannelInformation is not intended to
+        provide a general channel description, nor to provide
+        information that is available once the channel is in use.
+
+        The encoding and interpretation of the prtChannelInformation
+        object is specific to channel type.  The description of each
+        PrtChannelType enum value for which prtChannelInformation is
+        defined specifies the appropriate encoding and interpretation,
+        including interaction with other objects.  For channel types
+        that do not specify a prtChannelInformation value, its value
+        shall be null (0 length).
+
+        When a new PrtChannelType enumeration value is registered, its
+        accompanying description must specify the encoding and
+        interpretation of the prtChannelInformation value for the
+        channel type.  prtChannelInformation semantics for an existing
+        PrtChannelType may be added or amended in the same manner as
+        described in section 2.4.1 for type 2 enumeration values.
+
+        The prtChannelInformation specifies values for a collection of
+        channel attributes, represented as text according to the
+        following rules:
+
+        1. The prtChannelInformation is not affected by localization.
+
+        2. The prtChannelInformation is a list of entries representing
+        the attribute values.  Each entry consists of the following
+
+        items, in order:
+
+        a. A keyword, composed of alphabetic characters (A-Z, a-z)
+        represented by their NVT ASCII [RFC854] codes, that
+        identifies a channel attribute,
+        b. The NVT ASCII code for an Equals Sign (=) (code 61) to
+        delimit the keyword,
+        c. A data value encoded using rules specific to the
+        PrtChannelType to with the prtChannelInformation applies which
+        must in no case allow an octet with value 10 (the NVT ASCII
+        Line Feed code),
+        d. the NVT ASCII code for a Line Feed character (code 10) to
+        delimit the data value.
+
+        No other octets shall be present.
+
+        Keywords are case-sensitive.  Conventionally, keywords are
+        capitalized (including each word of a multi-word keyword) and
+        since they occupy space in the prtChannelInformation, they are
+        kept short.
+
+        3. If a channel attribute has multiple values, it is
+        represented by multiple entries with the same keyword, each
+        specifying one value. Otherwise, there shall be at most one
+        entry for each attribute.
+
+        4. By default, entries may appear in any order.  If there are
+        ordering constraints for particular entries, these must be
+        specified in their definitions.
+
+        5. The prtChannelInformation value by default consists of text
+        represented by NVT ASCII graphics character codes.  However,
+        other representations may be specified:
+
+        a. In cases where the prtChannelInformation value contains
+        information not normally coded in textual form, whatever
+        symbolic representation is conventionally used for the
+        information should be used for encoding the
+        prtChannelInformation value.  (For instance, a binary port value
+        might be represented as a decimal number using NVT ASCII
+        codes.)  Such encoding must be specified in the definition of
+        the value.
+
+        b. The value may contain textual information in a character set
+        other than NVT ASCII graphics characters.  (For instance, an
+
+        identifier might consist of ISO 10646 text encoded using the
+        UTF-8 encoding scheme.)  Such a character set and its encoding
+        must be specified in the definition of the value.
+
+        6. For each PrtChannelType for which prtChannelInformation
+        entries are defined, the descriptive text associated with the
+        PrtChannelType enumeration value shall specify the following
+        information for each entry:
+
+        Title:        Brief description phrase, e.g.: 'Port name',
+                      'Service Name', etc.
+
+        Keyword:      The keyword value, e.g.: 'Port' or 'Service'
+
+        Syntax:       The encoding of the entry value if it cannot be
+                      directly represented by NVT ASCII.
+
+        Status:       'Mandatory', 'Optional', or 'Conditionally
+                      Mandatory'
+
+        Multiplicity: 'Single' or 'Multiple' to indicate whether the
+                      entry may be present multiple times.
+
+        Description:  Description of the use of the entry, other
+                      information required to complete the definition
+                      (e.g.: ordering constraints, interactions between
+                      entries).
+
+        Applications that interpret prtChannelInformation should ignore
+        unrecognized entries, so they are not affected if new entry
+        types are added."
+     ::= { prtChannelEntry 9 }
+
+-- The Interpreter Group
+--
+-- The interpreter sub-units are responsible for the conversion
+-- of a description of intended print instances into images that
+-- are to be marked on the media.  A printer may have one or more
+-- interpreters.  The interpreter sub-units are represented by the
+-- Interpreter Group in the Model.  Each interpreter is generally
+-- implemented with software running on the System Controller
+-- sub-unit.  The Interpreter Table has one entry per interpreter
+-- where the interpreters include both Page Description Language
+-- (PDL) Interpreters and Control Language Interpreters.
+
+prtInterpreter OBJECT IDENTIFIER ::= { printmib 15 }
+
+--       Interpreter Table
+
+prtInterpreterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtInterpreterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The interpreter table is a table representing the
+        interpreters in the printer.  An entry shall be placed in the
+        interpreter table for each interpreter on the printer.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtInterpreter 1 }
+
+prtInterpreterEntry OBJECT-TYPE
+    SYNTAX     PrtInterpreterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entries may exist in the table for each device index with a
+        device type of 'printer'.  Each table entry provides a complete
+        description of the interpreter, including version information,
+        rendering resolutions, default character sets, output
+        orientation, and communication capabilities.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtInterpreterIndex }
+    ::= { prtInterpreterTable 1 }
+
+PrtInterpreterEntry ::= SEQUENCE {
+    prtInterpreterIndex                 Integer32,
+    prtInterpreterLangFamily            PrtInterpreterLangFamilyTC,
+    prtInterpreterLangLevel             OCTET STRING,
+    prtInterpreterLangVersion           OCTET STRING,
+    prtInterpreterDescription           PrtLocalizedDescriptionStringTC,
+    prtInterpreterVersion               OCTET STRING,
+    prtInterpreterDefaultOrientation    PrtPrintOrientationTC,
+    prtInterpreterFeedAddressability    Integer32,
+    prtInterpreterXFeedAddressability   Integer32,
+    prtInterpreterDefaultCharSetIn      IANACharset,
+    prtInterpreterDefaultCharSetOut     IANACharset,
+    prtInterpreterTwoWay                PrtInterpreterTwoWayTC
+    }
+
+prtInterpreterIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each PDL or control language for which
+        there exists an interpreter or emulator in the printer.  The
+        value is used to identify this interpreter.  Although these
+        values may change due to a major reconfiguration of the device
+        (e.g., the addition of new interpreters to the printer), values
+        SHOULD remain stable across successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtInterpreterEntry 1 }
+
+prtInterpreterLangFamily OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtInterpreterLangFamilyTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The family name of a Page Description Language (PDL) or
+        control language which this interpreter in the printer can
+        interpret or emulate.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtInterpreterEntry 2 }
+
+prtInterpreterLangLevel OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..31))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The level of the language which this interpreter is
+        interpreting or emulating.  This might contain a value like
+        '5e'for an interpreter which is emulating level 5e of the PCL
+        language.  It might contain '2' for an interpreter which is
+        emulating level 2 of the PostScript language.  Similarly it
+        might contain '2' for an interpreter which is emulating level 2
+        of the HPGL language."
+    ::= { prtInterpreterEntry 3 }
+
+prtInterpreterLangVersion OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..31))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The date code or version of the language which this
+        interpreter is interpreting or emulating."
+    ::= { prtInterpreterEntry 4 }
+
+prtInterpreterDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A string to identify this interpreter in the localization
+        specified by prtGeneralCurrentLocalization as opposed to the
+        language which is being interpreted.  It is anticipated that
+        this string will allow manufacturers to unambiguously identify
+        their interpreters."
+    ::= { prtInterpreterEntry 5 }
+
+prtInterpreterVersion OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..31))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The date code, version number, or other product specific
+        information tied to this interpreter.  This value is associated
+        with the interpreter, rather than with the version of the
+        language which is being interpreted or emulated."
+    ::= { prtInterpreterEntry 6 }
+
+prtInterpreterDefaultOrientation OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtPrintOrientationTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The current orientation default for this interpreter.  This
+        value may be overridden for a particular job (e.g., by a
+        command in the input data stream)."
+    ::= { prtInterpreterEntry 7 }
+
+prtInterpreterFeedAddressability OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum interpreter addressability in the feed
+        direction in 10000 prtMarkerAddressabilityUnits (as specified
+        by prtMarkerDefaultIndex) for this interpreter.  The
+        value (-1) means other and specifically indicates that the
+        sub-unit places no restrictions on this parameter.  The value
+        (-2) means unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtInterpreterEntry 8 }
+
+prtInterpreterXFeedAddressability OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum interpreter addressability in the cross feed
+        direction in 10000 prtMarkerAddressabilityUnits (as specified
+        by prtMarkerDefaultIndex) for this interpreter.  The
+        value (-1) means other and specifically indicates that the
+        sub-unit places no restrictions on this parameter.  The value
+        (-2) means unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtInterpreterEntry 9 }
+
+prtInterpreterDefaultCharSetIn OBJECT-TYPE
+    SYNTAX     IANACharset
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The default coded character set for input octets encountered
+        outside a context in which the Page Description Language
+        established the interpretation of the octets.  (Input octets are
+        presented to the interpreter through a path defined in the
+        channel group.)"
+     ::= { prtInterpreterEntry 10 }
+
+prtInterpreterDefaultCharSetOut OBJECT-TYPE
+    SYNTAX     IANACharset
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The default character set for data coming from this
+        interpreter through the printer's output channel (i.e. the
+        'backchannel')."
+    ::= { prtInterpreterEntry 11 }
+
+prtInterpreterTwoWay OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtInterpreterTwoWayTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Indicates whether or not this interpreter returns information
+        back to the host."
+    ::= { prtInterpreterEntry 12 }
+
+-- The Console Group
+--
+-- Many printers have a console on the printer, the operator
+-- console, that is used to display and modify the state of the
+-- printer.  The console can be as simple as a few indicators and
+-- switches or as complicated as full screen displays and
+-- keyboards.  There can be at most one such console.
+
+-- The Display Buffer Table
+
+prtConsoleDisplayBuffer OBJECT IDENTIFIER ::= { printmib 16 }
+
+prtConsoleDisplayBufferTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtConsoleDisplayBufferEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Physical display buffer for printer console display or
+        operator panel
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtConsoleDisplayBuffer 5 }
+
+prtConsoleDisplayBufferEntry OBJECT-TYPE
+    SYNTAX     PrtConsoleDisplayBufferEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "This table contains one entry for each physical line on
+        the display.  Lines cannot be added or deleted.  Entries may
+        exist in the table for each device index with a device type of
+        'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+
+        for clarification."
+    INDEX  { hrDeviceIndex, prtConsoleDisplayBufferIndex }
+    ::= { prtConsoleDisplayBufferTable 1 }
+
+PrtConsoleDisplayBufferEntry ::= SEQUENCE {
+    prtConsoleDisplayBufferIndex    Integer32,
+    prtConsoleDisplayBufferText     PrtConsoleDescriptionStringTC
+    }
+
+prtConsoleDisplayBufferIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each console line in the printer.  The value
+        is used to identify this console line.  Although these values
+        may change due to a major reconfiguration of the device (e.g.,
+        the addition of new console lines to the printer).  Values
+        SHOULD remain stable across successive printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtConsoleDisplayBufferEntry 1 }
+
+prtConsoleDisplayBufferText OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtConsoleDescriptionStringTC
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The content of a line in the logical display buffer of
+        the operator's console of the printer.  When a write
+        operation occurs, normally a critical message, to one of
+        the LineText strings, the agent should make that line
+        displayable if a physical display is present.  Writing a zero
+        length string clears the line.  It is an implementation-
+        specific matter as to whether the agent allows a line to be
+        overwritten before it has been cleared.  Printer generated
+        strings shall be in the localization specified by
+        prtConsoleLocalization.Management Application generated strings
+        should be localized by the Management Application."
+    ::= { prtConsoleDisplayBufferEntry 2 }
+
+-- The Console Light Table
+
+prtConsoleLights OBJECT IDENTIFIER ::= { printmib 17 }
+
+prtConsoleLightTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtConsoleLightEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The console light table provides a description and state
+        information for each light present on the printer console.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtConsoleLights 6 }
+
+prtConsoleLightEntry OBJECT-TYPE
+    SYNTAX     PrtConsoleLightEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entries may exist in the table for each device index with a
+        device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtConsoleLightIndex }
+    ::= { prtConsoleLightTable 1 }
+
+PrtConsoleLightEntry ::= SEQUENCE {
+    prtConsoleLightIndex            Integer32,
+    prtConsoleOnTime                Integer32,
+    prtConsoleOffTime               Integer32,
+    prtConsoleColor                 PrtConsoleColorTC,
+    prtConsoleDescription           PrtConsoleDescriptionStringTC
+    }
+
+prtConsoleLightIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)  -- Lower limit invalid in RFC 1759
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A unique value used by the printer to identify this light.
+        Although these values may change due to a major
+        reconfiguration of the device (e.g., the addition of new lights
+        to the printer).  Values SHOULD remain stable across successive
+        printer power cycles.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtConsoleLightEntry 1 }
+
+prtConsoleOnTime OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object, in conjunction with prtConsoleOffTime, defines
+        the current status of the light.  If both prtConsoleOnTime and
+        prtConsoleOffTime are non-zero, the lamp is blinking and the
+        values presented define the on time and off time, respectively,
+        in milliseconds.  If prtConsoleOnTime is zero and
+        prtConsoleOffTime is non-zero, the lamp is off.  If
+        prtConsoleOffTime is zero and prtConsoleOnTime is non-zero, the
+        lamp is on.  If both values are zero the lamp is off.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtConsoleLightEntry 2 }
+
+prtConsoleOffTime OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object, in conjunction with prtConsoleOnTime, defines the
+        current status of the light.  If both prtConsoleOnTime and
+        prtConsoleOffTime are non-zero, the lamp is blinking and the
+        values presented define the on time and off time, respectively,
+        in milliseconds.  If prtConsoleOnTime is zero and
+        prtConsoleOffTime is non-zero, the lamp is off.  If
+        prtConsoleOffTime is zero and prtConsoleOnTime is non-zero, the
+        lamp is on.  If both values are zero the lamp is off.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtConsoleLightEntry 3 }
+
+prtConsoleColor OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtConsoleColorTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The color of this light."
+    ::= { prtConsoleLightEntry 4 }
+
+prtConsoleDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtConsoleDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The vendor description or label of this light in the
+        localization specified by prtConsoleLocalization."
+    ::= { prtConsoleLightEntry 5 }
+
+-- The Alerts Group
+--
+-- The table contains information on the severity, component,
+-- detail location within the component, alert code and
+-- description of each critical alert that is currently active
+-- within the printer.  See 2.2.13 for a more complete
+-- description of the alerts table and its management.
+--
+-- Each parameter in the Trap PDU is a full OID which itself is
+-- indexed by the host resources MIB "hrDeviceIndex" object.  In
+-- order for a management station to obtain the correct
+-- "hrDeviceIndex" associated with a particular Trap PDU, the
+-- "hrDeviceIndex" value can be extracted from the returned OID
+-- value in the Trap PDU when the PDU is received by the
+-- Management station.
+
+prtAlert OBJECT IDENTIFIER ::= { printmib 18 }
+
+prtAlertTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF PrtAlertEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The prtAlertTable lists all the critical and non-critical
+        alerts currently active in the printer.  A critical alert is
+        one that stops the printer from printing immediately and
+        printing can not continue until the critical alert condition
+        is eliminated.  Non-critical alerts are those items that do
+        not stop printing but may at some future time.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtAlert 1 }
+
+prtAlertEntry OBJECT-TYPE
+    SYNTAX     PrtAlertEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Entries may exist in the table for each device
+        index with a device type of 'printer'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    INDEX  { hrDeviceIndex, prtAlertIndex }
+    ::= { prtAlertTable 1 }
+
+PrtAlertEntry ::= SEQUENCE {
+    prtAlertIndex               Integer32,
+    prtAlertSeverityLevel       PrtAlertSeverityLevelTC,
+    prtAlertTrainingLevel       PrtAlertTrainingLevelTC,
+    prtAlertGroup               PrtAlertGroupTC,
+    prtAlertGroupIndex          Integer32,
+    prtAlertLocation            Integer32,
+    prtAlertCode                PrtAlertCodeTC,
+    prtAlertDescription         PrtLocalizedDescriptionStringTC,
+    prtAlertTime                TimeTicks
+    }
+
+prtAlertIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.  The MAX-ACCESS has
+    --       been changed from not accessible to allow the object to be
+    --       included (as originally in RFC 1759) in the trap bindings.
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index value used to determine which alerts have been added
+        or removed from the alert table.  This is an incrementing
+        integer initialized to 1 when the printer is reset.  (i.e., The
+        first event placed in the alert table after a reset of the
+        printer shall have an index value of 1.)  When the printer adds
+        an alert to the table, that alert is assigned the next higher
+        integer value from the last item entered into the table.  If
+        the index value reaches its maximum value, the next index value
+        used must be 1.
+
+        NOTE: The management application will read the alert table when
+        a trap or event notification occurs or at a periodic rate and
+        then parse the table to determine if any new entries were added
+        by comparing the last known index value with the current
+        highest index value.  The management application will then
+        update its copy of the alert table.  When the printer discovers
+        that an alert is no longer active, the printer shall remove the
+
+        row for that alert from the table and shall reduce the number
+        of rows in the table.  The printer may add or delete any number
+        of rows from the table at any time.  The management station can
+        detect when binary change alerts have been deleted by
+        requesting an attribute of each alert, and noting alerts as
+        deleted when that retrieval is not possible.  The objects
+        'prtAlertCriticalEvents'and 'prtAlertAllEvents' in the
+        'prtGeneralTable' reduce the need for management applications
+        to scan the 'prtAlertTable'.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtAlertEntry 1 }
+
+prtAlertSeverityLevel OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtAlertSeverityLevelTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The level of severity of this alert table entry.  The printer
+        determines the severity level assigned to each entry into the
+        table."
+    ::= { prtAlertEntry 2 }
+
+prtAlertTrainingLevel OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtAlertTrainingLevelTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtAlertEntry 3 }
+
+prtAlertGroup OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtAlertGroupTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of sub-unit within the printer model that this alert
+        is related.  Input, output, and markers are examples of printer
+
+        model groups, i.e., examples of types of sub-units.  Wherever
+        possible, these enumerations match the sub-identifier that
+        identifies the relevant table in the printmib."
+    ::= { prtAlertEntry 4 }
+
+prtAlertGroupIndex OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The low-order index of the row within the table identified
+        by prtAlertGroup that represents the sub-unit of the printer
+        that caused this alert, or -1 if not applicable.  The
+        combination of the prtAlertGroup and the prtAlertGroupIndex
+        defines exactly which printer sub-unit caused the alert; for
+        example, Input #3, Output#2, and Marker #1.  Every object in
+        this MIB is indexed with hrDeviceIndex and optionally, another
+        index variable.  If this other index variable is present in the
+        table that generated the alert, it will be used as the value
+        for this object.  Otherwise, this value shall be -1.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtAlertEntry 5 }
+
+prtAlertLocation OBJECT-TYPE
+    -- NOTE: In RFC 1759, the range was not defined.
+    SYNTAX     Integer32 (-2..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The sub-unit location that is defined by the printer
+        manufacturer to further refine the location of this alert
+        within the designated sub-unit.  The location is used in
+        conjunction with the Group and GroupIndex values; for example,
+        there is an alert in Input #2 at location number 7.  The value
+        (-2) indicates unknown.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtAlertEntry 6 }
+
+prtAlertCode OBJECT-TYPE
+    --  NOTE: In RFC 1759, the enumeration values were implicitly
+    --  defined by this object.
+    SYNTAX     PrtAlertCodeTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "See associated TEXTUAL-CONVENTION PrtAlertCodeTC.
+
+        NOTE: The above description has been modified from RFC 1759
+        for clarification."
+    ::= { prtAlertEntry 7 }
+
+prtAlertDescription OBJECT-TYPE
+    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
+    -- to a TC to better support localization of the object.
+    SYNTAX     PrtLocalizedDescriptionStringTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of this alert entry in the localization
+        specified by prtGeneralCurrentLocalization.  The description is
+        provided by the printer to further elaborate on the enumerated
+        alert or provide information in the case where the code is
+        classified as 'other' or 'unknown'.  The printer is required to
+        return a description string but the string may be a null
+        string."
+    ::= { prtAlertEntry 8 }
+
+prtAlertTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime at the time that this alert was
+        generated."
+    ::= { prtAlertEntry 9 }
+
+printerV1Alert OBJECT-IDENTITY
+    STATUS  current
+    DESCRIPTION
+        "The value of the enterprise-specific OID in an SNMPv1 trap
+        sent signaling a critical event in the prtAlertTable."
+    ::= { prtAlert 2 }
+
+printerV2AlertPrefix OBJECT IDENTIFIER ::= { printerV1Alert 0 }
+
+printerV2Alert NOTIFICATION-TYPE
+    OBJECTS { prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup,
+        prtAlertGroupIndex, prtAlertLocation, prtAlertCode }
+    STATUS  current
+    DESCRIPTION
+        "This trap is sent whenever a critical event is added to the
+
+        prtAlertTable.
+
+        NOTE: The prtAlertIndex object was redundantly included in the
+        bindings of the 'printerV2Alert' notification in RFC 1759, even
+        though the value exists in the instance qualifier of all the
+        other bindings.  This object has been retained to provide
+        compatiblity with existing RFC 1759 implementaions."
+    ::= { printerV2AlertPrefix 1 }
+
+-- Note that the SNMPv2 to SNMPv1 translation rules dictate that
+-- the preceding structure will result in SNMPv1 traps of the
+-- following form:
+--
+-- printerAlert TRAP-TYPE
+--     ENTERPRISE printerV1Alert
+--     VARIABLES { prtAlertIndex, prtAlertSeverityLevel,
+--                 prtAlertGroup, prtAlertGroupIndex,
+--                 prtAlertLocation, prtAlertCode }
+--     DESCRIPTION
+--        "This trap is sent whenever a critical event is added
+--         to the prtAlertTable."
+--     ::= 1
+
+-- Conformance Information
+
+prtMIBConformance OBJECT IDENTIFIER ::= { printmib 2 }
+
+-- compliance statements
+
+prtMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for agents that implement the
+        printer MIB as defined by RFC 1759."
+    MODULE -- this module
+    MANDATORY-GROUPS { prtGeneralGroup, prtInputGroup,
+                       prtOutputGroup,
+                       prtMarkerGroup, prtMediaPathGroup,
+                       prtChannelGroup, prtInterpreterGroup,
+                       prtConsoleGroup, prtAlertTableGroup }
+    OBJECT    prtGeneralReset
+    SYNTAX    INTEGER {
+                  notResetting(3),
+                  resetToNVRAM(5)
+                  }
+    DESCRIPTION
+        "It is conformant to implement just these two states in this
+
+        object.  Any additional states are optional."
+
+    OBJECT    prtConsoleOnTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtConsoleOffTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+    ::= { prtMIBConformance 1 }
+
+prtMIB2Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for agents that implement the
+        printer MIB V2."
+        -- The changes from RFC 1759 fall into 2 categories:
+        -- 1. New objects plus existing objects with a MIN-ACCESS of
+        --    read-only are included.  Existing objects have been added
+        --    to this category due to feedback from implementers and
+        --    interoperability testing.  This allows products to be
+        --    be designed with a higher degree of SNMP security.
+        -- 2. New object groups have been added to include all new
+        --    objects in this MIB.  All new object groups are optional.
+        -- Any MIB that is compliant with RFC 1759 will also be
+        -- compliant with this version of the MIB.
+    MODULE -- this module
+    MANDATORY-GROUPS { prtGeneralGroup, prtInputGroup,
+                       prtOutputGroup,
+                       prtMarkerGroup, prtMediaPathGroup,
+                       prtChannelGroup, prtInterpreterGroup,
+                       prtConsoleGroup, prtAlertTableGroup }
+    OBJECT    prtGeneralReset
+    SYNTAX    INTEGER {
+                  notResetting(3),
+                  resetToNVRAM(5)
+                  }
+    DESCRIPTION
+        "It is conformant to implement just these two states in this
+        object.  Any additional states are optional."
+
+    OBJECT    prtGeneralCurrentLocalization
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtGeneralCurrentOperator
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtGeneralServicePerson
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtGeneralPrinterName
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtGeneralSerialNumber
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputDefaultIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaDimFeedDirDeclared
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMaxCapacity
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputCurrentLevel
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaName
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputName
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputSecurity
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaWeight
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaType
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaColor
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaFormParts
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputDefaultIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputMaxCapacity
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputRemainingCapacity
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputName
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputSecurity
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputMaxDimFeedDir
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputMaxDimXFeedDir
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputMinDimFeedDir
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputMinDimXFeedDir
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputStackingOrder
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputPageDeliveryOrientation
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputBursting
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputDecollating
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputPageCollated
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtOutputOffsetStacking
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtMarkerDefaultIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtMarkerSuppliesMaxCapacity
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtMarkerSuppliesLevel
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtMediaPathDefaultIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtChannelCurrentJobCntlLangIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtChannelDefaultPageDescLangIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtChannelState
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtChannelIfIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInterpreterDefaultOrientation
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInterpreterDefaultCharSetIn
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInterpreterDefaultCharSetOut
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtConsoleLocalization
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtConsoleDisable
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtConsoleDisplayBufferText
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtConsoleOnTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtConsoleOffTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtAlertIndex
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+        "It is conformant to implement this object as
+        accessible-for-notify "
+
+    GROUP    prtResponsiblePartyGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtExtendedInputGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtInputMediaGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtExtendedOutputGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtOutputDimensionsGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtOutputFeaturesGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtMarkerSuppliesGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtMarkerColorantGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtAlertTimeGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    -- the prtResponsiblePartyGroup, prtExtendedInputGroup,
+    -- prtInputMediaGroup, prtExtendedOutputGroup,
+    -- prtOutputDimensionsGroup, prtOutputFeaturesGroup,
+    -- prtMarkerSuppliesGroup, prtMarkerColorantGroup, and the
+    -- prtAlertTimeGroup are completely optional.  However, it is
+    -- strongly RECOMMENDED that the prtAlertTimeGroup be implemented.
+
+    -- New to version 2 of this printer MIB:
+    OBJECT    prtAuxiliarySheetStartupPage
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtAuxiliarySheetBannerPage
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputMediaLoadTimeout
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    OBJECT    prtInputNextIndex
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "It is conformant to implement this object as read-only"
+
+    GROUP    prtAuxiliarySheetGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtInputSwitchingGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtGeneralV2Group
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtAlertTableV2Group
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtChannelV2Group
+    DESCRIPTION
+        "This group is unconditionally optional."
+
+    GROUP    prtAlertTrapGroup
+    DESCRIPTION
+        "This group is unconditionally optional."
+    ::= { prtMIBConformance 3 }
+
+prtMIBGroups    OBJECT IDENTIFIER ::= { prtMIBConformance 2 }
+-- These groups are from RFC 1759 and are applicable to Printer MIB V2
+
+prtGeneralGroup OBJECT-GROUP
+    OBJECTS { prtGeneralConfigChanges,
+              prtGeneralCurrentLocalization,
+              prtGeneralReset, prtCoverDescription,
+              prtCoverStatus,
+              prtLocalizationLanguage, prtLocalizationCountry,
+              prtLocalizationCharacterSet, prtStorageRefIndex,
+              prtDeviceRefIndex }
+    STATUS  current
+    DESCRIPTION
+        "The general printer group."
+    ::= { prtMIBGroups 1 }
+
+prtResponsiblePartyGroup OBJECT-GROUP
+    OBJECTS { prtGeneralCurrentOperator, prtGeneralServicePerson }
+    STATUS  current
+    DESCRIPTION
+        "The responsible party group contains contact information for
+        humans responsible for the printer."
+    ::= { prtMIBGroups 2 }
+
+prtInputGroup OBJECT-GROUP
+    OBJECTS { prtInputDefaultIndex, prtInputType, prtInputDimUnit,
+              prtInputMediaDimFeedDirDeclared,
+              prtInputMediaDimXFeedDirDeclared,
+              prtInputMediaDimFeedDirChosen,
+              prtInputMediaDimXFeedDirChosen, prtInputCapacityUnit,
+              prtInputMaxCapacity, prtInputCurrentLevel, prtInputStatus,
+              prtInputMediaName }
+    STATUS  current
+    DESCRIPTION
+        "The input group."
+    ::= { prtMIBGroups 3 }
+
+prtExtendedInputGroup OBJECT-GROUP
+    OBJECTS { prtInputName, prtInputVendorName, prtInputModel,
+              prtInputVersion, prtInputSerialNumber,
+              prtInputDescription, prtInputSecurity }
+    STATUS  current
+    DESCRIPTION
+        "The extended input group."
+    ::= { prtMIBGroups 4 }
+
+prtInputMediaGroup OBJECT-GROUP
+    OBJECTS { prtInputMediaWeight, prtInputMediaType,
+              prtInputMediaColor, prtInputMediaFormParts }
+    STATUS  current
+    DESCRIPTION
+        "The input media group."
+    ::= { prtMIBGroups 5 }
+
+prtOutputGroup OBJECT-GROUP
+    OBJECTS { prtOutputDefaultIndex, prtOutputType,
+              prtOutputCapacityUnit, prtOutputMaxCapacity,
+              prtOutputRemainingCapacity,  prtOutputStatus }
+    STATUS  current
+    DESCRIPTION
+        "The output group."
+    ::= { prtMIBGroups 6 }
+
+prtExtendedOutputGroup OBJECT-GROUP
+    OBJECTS { prtOutputName, prtOutputVendorName, prtOutputModel,
+              prtOutputVersion, prtOutputSerialNumber,
+              prtOutputDescription, prtOutputSecurity }
+    STATUS  current
+    DESCRIPTION
+        "The extended output group."
+    ::= { prtMIBGroups 7 }
+
+prtOutputDimensionsGroup OBJECT-GROUP
+    OBJECTS { prtOutputDimUnit, prtOutputMaxDimFeedDir,
+              prtOutputMaxDimXFeedDir, prtOutputMinDimFeedDir,
+              prtOutputMinDimXFeedDir }
+    STATUS  current
+    DESCRIPTION
+        "The output dimensions group"
+    ::= { prtMIBGroups 8 }
+
+prtOutputFeaturesGroup OBJECT-GROUP
+    OBJECTS { prtOutputStackingOrder,
+              prtOutputPageDeliveryOrientation, prtOutputBursting,
+              prtOutputDecollating, prtOutputPageCollated,
+              prtOutputOffsetStacking }
+    STATUS  current
+    DESCRIPTION
+        "The output features group."
+    ::= { prtMIBGroups 9 }
+
+prtMarkerGroup OBJECT-GROUP
+    OBJECTS { prtMarkerDefaultIndex, prtMarkerMarkTech,
+              prtMarkerCounterUnit, prtMarkerLifeCount,
+              prtMarkerPowerOnCount, prtMarkerProcessColorants,
+              prtMarkerSpotColorants, prtMarkerAddressabilityUnit,
+              prtMarkerAddressabilityFeedDir,
+              prtMarkerAddressabilityXFeedDir, prtMarkerNorthMargin,
+              prtMarkerSouthMargin, prtMarkerWestMargin,
+              prtMarkerEastMargin, prtMarkerStatus }
+    STATUS  current
+    DESCRIPTION
+        "The marker group."
+    ::= { prtMIBGroups 10 }
+
+prtMarkerSuppliesGroup OBJECT-GROUP
+    OBJECTS { prtMarkerSuppliesMarkerIndex,
+              prtMarkerSuppliesColorantIndex, prtMarkerSuppliesClass,
+              prtMarkerSuppliesType, prtMarkerSuppliesDescription,
+              prtMarkerSuppliesSupplyUnit,
+              prtMarkerSuppliesMaxCapacity, prtMarkerSuppliesLevel }
+    STATUS  current
+    DESCRIPTION
+        "The marker supplies group."
+    ::= { prtMIBGroups 11 }
+
+prtMarkerColorantGroup OBJECT-GROUP
+    OBJECTS { prtMarkerColorantMarkerIndex, prtMarkerColorantRole,
+              prtMarkerColorantValue, prtMarkerColorantTonality }
+    STATUS  current
+    DESCRIPTION
+        "The marker colorant group."
+    ::= { prtMIBGroups 12 }
+
+prtMediaPathGroup OBJECT-GROUP
+    OBJECTS { prtMediaPathDefaultIndex, prtMediaPathMaxSpeedPrintUnit,
+              prtMediaPathMediaSizeUnit, prtMediaPathMaxSpeed,
+              prtMediaPathMaxMediaFeedDir,
+              prtMediaPathMaxMediaXFeedDir,
+              prtMediaPathMinMediaFeedDir,
+              prtMediaPathMinMediaXFeedDir, prtMediaPathType,
+              prtMediaPathDescription, prtMediaPathStatus}
+    STATUS  current
+    DESCRIPTION
+        "The media path group."
+    ::= { prtMIBGroups 13 }
+
+prtChannelGroup OBJECT-GROUP
+    OBJECTS { prtChannelType, prtChannelProtocolVersion,
+              prtChannelCurrentJobCntlLangIndex,
+              prtChannelDefaultPageDescLangIndex, prtChannelState,
+              prtChannelIfIndex, prtChannelStatus
+              }
+    STATUS  current
+    DESCRIPTION
+        "The channel group."
+    ::= { prtMIBGroups 14 }
+
+prtInterpreterGroup OBJECT-GROUP
+    OBJECTS { prtInterpreterLangFamily, prtInterpreterLangLevel,
+              prtInterpreterLangVersion, prtInterpreterDescription,
+              prtInterpreterVersion, prtInterpreterDefaultOrientation,
+              prtInterpreterFeedAddressability,
+              prtInterpreterXFeedAddressability,
+              prtInterpreterDefaultCharSetIn,
+              prtInterpreterDefaultCharSetOut, prtInterpreterTwoWay }
+    STATUS  current
+    DESCRIPTION
+        "The interpreter group."
+    ::= { prtMIBGroups 15 }
+
+prtConsoleGroup OBJECT-GROUP
+    OBJECTS { prtConsoleLocalization, prtConsoleNumberOfDisplayLines,
+              prtConsoleNumberOfDisplayChars, prtConsoleDisable,
+              prtConsoleDisplayBufferText, prtConsoleOnTime,
+              prtConsoleOffTime, prtConsoleColor,
+              prtConsoleDescription }
+    STATUS  current
+    DESCRIPTION
+        "The console group."
+    ::= { prtMIBGroups 16 }
+
+prtAlertTableGroup OBJECT-GROUP
+    OBJECTS { prtAlertSeverityLevel, prtAlertTrainingLevel,
+              prtAlertGroup, prtAlertGroupIndex, prtAlertLocation,
+              prtAlertCode, prtAlertDescription }
+    STATUS  current
+    DESCRIPTION
+        "The alert table group."
+    ::= { prtMIBGroups 17 }
+
+prtAlertTimeGroup OBJECT-GROUP
+    OBJECTS { prtAlertTime }
+    STATUS  current
+    DESCRIPTION
+        "The alert time group. Implementation of prtAlertTime is
+        strongly RECOMMENDED."
+    ::= { prtMIBGroups 18 }
+
+prtMIB2Groups    OBJECT IDENTIFIER ::= { prtMIBConformance 4 }
+-- These groups are unique to Printer MIB V2
+
+prtAuxiliarySheetGroup OBJECT-GROUP
+    OBJECTS { prtAuxiliarySheetStartupPage,
+              prtAuxiliarySheetBannerPage }
+    STATUS  current
+    DESCRIPTION
+        "The auxiliary sheet group."
+    ::= { prtMIBGroups 19 }
+
+prtInputSwitchingGroup OBJECT-GROUP
+    OBJECTS { prtInputMediaLoadTimeout, prtInputNextIndex }
+    STATUS  current
+    DESCRIPTION
+        "The input switching group."
+    ::= { prtMIBGroups 20 }
+
+prtGeneralV2Group OBJECT-GROUP
+    OBJECTS { prtGeneralPrinterName, prtGeneralSerialNumber }
+    STATUS  current
+    DESCRIPTION
+        "The general printer group with new v2 objects."
+    ::= { prtMIBGroups 21 }
+
+prtAlertTableV2Group OBJECT-GROUP
+    OBJECTS { prtAlertIndex, prtAlertCriticalEvents, prtAlertAllEvents }
+    STATUS  current
+    DESCRIPTION
+        "The alert table group with new v2 objects and prtAlertIndex
+        changed to MAX-ACCESS of 'read-only' for inclusion in the trap
+        bindings (as originally defined in RFC 1759)."
+    ::= { prtMIBGroups 22 }
+
+prtChannelV2Group OBJECT-GROUP
+    OBJECTS { prtChannelInformation }
+    STATUS  current
+    DESCRIPTION
+        "The channel group with a new v2 object."
+    ::= { prtMIBGroups 23 }
+
+prtAlertTrapGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { printerV2Alert }
+    STATUS  current
+    DESCRIPTION
+        "The alert trap group."
+    ::= { prtMIBGroups 24 }
+
+END
diff --git a/snmp_builder/mibs/Q-BRIDGE-MIB.mib b/snmp_builder/mibs/Q-BRIDGE-MIB.mib
new file mode 100644
index 0000000..e7ad9aa
--- /dev/null
+++ b/snmp_builder/mibs/Q-BRIDGE-MIB.mib
@@ -0,0 +1,2367 @@
+Q-BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+-- -------------------------------------------------------------
+-- MIB for IEEE 802.1Q Devices
+-- -------------------------------------------------------------
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Counter32, Counter64, Unsigned32, TimeTicks, Integer32
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    dot1dBridge, dot1dBasePortEntry, dot1dBasePort
+        FROM BRIDGE-MIB
+    EnabledStatus
+        FROM P-BRIDGE-MIB
+    TimeFilter
+        FROM RMON2-MIB;
+
+qBridgeMIB MODULE-IDENTITY
+    LAST-UPDATED "200601090000Z"
+    ORGANIZATION "IETF Bridge MIB Working Group"
+    CONTACT-INFO
+        "Email:  Bridge-mib@ietf.org
+                 ietfmibs@ops.ietf.org
+
+                 David Levi
+         Postal: Nortel Networks
+                 4655 Great America Parkway
+                 Santa Clara, CA 95054
+                 USA
+         Phone:  +1 865 686 0432
+         Email:  dlevi@nortel.com
+
+                 David Harrington
+         Postal: Effective Software
+                 50 Harding Rd.
+                 Portsmouth, NH 03801
+                 USA
+         Phone:  +1 603 436 8634
+         Email:  ietfdbh@comcast.net
+
+                 Les Bell
+         Postal: Hemel Hempstead, Herts. HP2 7YU
+                 UK
+          Email: elbell@ntlworld.com
+
+                 Andrew Smith
+         Postal: Beijing Harbour Networks
+                 Jiuling Building
+                 21 North Xisanhuan Ave.
+                 Beijing, 100089
+                 PRC
+            Fax: +1 415 345 1827
+          Email: ah_smith@acm.org
+
+                 Paul Langille
+         Postal: Newbridge Networks
+                 5 Corporate Drive
+                 Andover, MA 01810
+                 USA
+          Phone: +1 978 691 4665
+          Email: langille@newbridge.com
+
+                 Anil Rijhsinghani
+         Postal: Accton Technology Corporation
+                 5 Mount Royal Ave
+                 Marlboro, MA 01752
+                 USA
+          Phone:
+          Email: anil@accton.com
+
+                 Keith McCloghrie
+         Postal: Cisco Systems, Inc.
+                 170 West Tasman Drive
+                 San Jose, CA 95134-1706
+                 USA
+          Phone: +1 408 526 5260
+          Email: kzm@cisco.com"
+    DESCRIPTION
+        "The VLAN Bridge MIB module for managing Virtual Bridged
+        Local Area Networks, as defined by IEEE 802.1Q-2003,
+        including Restricted Vlan Registration defined by
+        IEEE 802.1u-2001 and Vlan Classification defined by
+        IEEE 802.1v-2001.
+
+        Copyright (C) The Internet Society (2006).  This version of
+        this MIB module is part of RFC 4363; See the RFC itself for
+        full legal notices."
+    REVISION     "200601090000Z"
+    DESCRIPTION
+         "Added Vlan TEXTUAL-CONVENTIONs,
+          dot1qPortRestrictedVlanRegistration, dot1vProtocol subtree,
+          qBridgeClassificationDeviceGroup, qBridgePortGroup2,
+          qBridgeClassificationPortGroup, and qBridgeCompliance2.
+          Clarified dot1qForwardAllStaticPorts,
+          qPortAcceptableFrameTypes, and qBridgeCompliance.
+          Deprecated qBridgePortGroup and qBridgeCompliance."
+
+    REVISION     "199908250000Z"
+    DESCRIPTION
+         "The VLAN Bridge MIB module for managing Virtual Bridged
+        Local Area Networks, as defined by IEEE 802.1Q-1998.
+
+        Initial version, published as RFC 2674."
+    ::= { dot1dBridge 7 }
+
+qBridgeMIBObjects OBJECT IDENTIFIER ::= { qBridgeMIB 1 }
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+PortList ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Each octet within this value specifies a set of eight
+        ports, with the first octet specifying ports 1 through
+        8, the second octet specifying ports 9 through 16, etc.
+        Within each octet, the most significant bit represents
+        the lowest numbered port, and the least significant bit
+        represents the highest numbered port.  Thus, each port
+        of the bridge is represented by a single bit within the
+        value of this object.  If that bit has a value of '1',
+        then that port is included in the set of ports; the port
+        is not included if its bit has a value of '0'."
+    SYNTAX      OCTET STRING
+
+VlanIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "A value used to index per-VLAN tables: values of 0 and
+        4095 are not permitted.  If the value is between 1 and
+        4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
+        global scope within a given bridged domain (see VlanId
+        textual convention).  If the value is greater than 4095,
+        then it represents a VLAN with scope local to the
+        particular agent, i.e., one without a global VLAN-ID
+        assigned to it.  Such VLANs are outside the scope of
+        IEEE 802.1Q, but it is convenient to be able to manage them
+        in the same way using this MIB."
+    SYNTAX      Unsigned32
+
+VlanId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "The VLAN-ID that uniquely identifies a VLAN.  This
+        is the 12-bit VLAN-ID used in the VLAN Tag header.
+        The range is defined by the REFERENCEd specification."
+    REFERENCE
+        "IEEE Std 802.1Q 2003 Edition, Virtual Bridged
+        Local Area Networks."
+    SYNTAX      Integer32 (1..4094)
+
+VlanIdOrAny ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "The VLAN-ID that uniquely identifies a specific VLAN,
+        or any VLAN.  The special value of 4095 is used to
+        indicate a wildcard, i.e., any VLAN.  This can be used
+        in any situation where an object or table entry must
+        refer either to a specific VLAN or to any VLAN.
+
+        Note that a MIB object that is defined using this
+        TEXTUAL-CONVENTION should clarify the meaning of
+        'any VLAN' (i.e., the special value 4095)."
+    SYNTAX       Integer32 (1..4094 | 4095)
+
+VlanIdOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "The VLAN-ID that uniquely identifies a specific VLAN,
+        or no VLAN.  The special value of zero is used to
+        indicate that no VLAN-ID is present or used.  This can
+        be used in any situation where an object or a table entry
+        must refer either to a specific VLAN, or to no VLAN.
+
+        Note that a MIB object that is defined using this
+        TEXTUAL-CONVENTION should clarify the meaning of
+        'no VLAN' (i.e., the special value 0)."
+    SYNTAX       Integer32 (0 | 1..4094)
+
+VlanIdOrAnyOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "The VLAN-ID that uniquely identifies a specific VLAN,
+        any VLAN, or no VLAN.  The special values 0 and 4095
+        have the same meaning as described in the VlanIdOrAny
+        and VlanIdOrNone TEXTUAL-CONVENTIONs.
+
+        Note that a MIB object that is defined using this
+        TEXTUAL-CONVENTION should clarify the meaning of
+        'any VLAN' and 'no VLAN' (i.e., the special values
+        0 and 4095)."
+    SYNTAX       Integer32 (0 | 1..4094 | 4095)
+
+-- -------------------------------------------------------------
+-- subtrees in the Q-BRIDGE MIB
+-- -------------------------------------------------------------
+
+dot1qBase       OBJECT IDENTIFIER ::= { qBridgeMIBObjects 1 }
+dot1qTp         OBJECT IDENTIFIER ::= { qBridgeMIBObjects 2 }
+dot1qStatic     OBJECT IDENTIFIER ::= { qBridgeMIBObjects 3 }
+dot1qVlan       OBJECT IDENTIFIER ::= { qBridgeMIBObjects 4 }
+dot1vProtocol   OBJECT IDENTIFIER ::= { qBridgeMIBObjects 5 }
+
+-- -------------------------------------------------------------
+-- dot1qBase subtree
+-- -------------------------------------------------------------
+
+dot1qVlanVersionNumber OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    version1(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of IEEE 802.1Q that this device
+        supports."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.1.1"
+    ::= { dot1qBase 1 }
+
+dot1qMaxVlanId OBJECT-TYPE
+    SYNTAX      VlanId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum IEEE 802.1Q VLAN-ID that this device
+
+        supports."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 9.3.2.3"
+    ::= { dot1qBase 2 }
+
+dot1qMaxSupportedVlans OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of IEEE 802.1Q VLANs that this
+        device supports."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.1.1"
+    ::= { dot1qBase 3 }
+
+dot1qNumVlans OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current number of IEEE 802.1Q VLANs that are
+        configured in this device."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.1.1"
+    ::= { dot1qBase 4 }
+
+dot1qGvrpStatus OBJECT-TYPE
+    SYNTAX      EnabledStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The administrative status requested by management for
+        GVRP.  The value enabled(1) indicates that GVRP should
+        be enabled on this device, on all ports for which it has
+        not been specifically disabled.  When disabled(2), GVRP
+        is disabled on all ports, and all GVRP packets will be
+        forwarded transparently.  This object affects all GVRP
+        Applicant and Registrar state machines.  A transition
+        from disabled(2) to enabled(1) will cause a reset of all
+        GVRP state machines on all ports.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { enabled }
+    ::= { dot1qBase 5 }
+
+-- -------------------------------------------------------------
+
+-- the dot1qTp subtree
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- the current Filtering Database Table
+-- -------------------------------------------------------------
+
+dot1qFdbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains configuration and control
+        information for each Filtering Database currently
+        operating on this device.  Entries in this table appear
+        automatically when VLANs are assigned FDB IDs in the
+        dot1qVlanCurrentTable."
+    ::= { dot1qTp 1 }
+
+dot1qFdbEntry OBJECT-TYPE
+    SYNTAX      Dot1qFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a specific Filtering Database."
+    INDEX   { dot1qFdbId }
+    ::= { dot1qFdbTable 1 }
+
+Dot1qFdbEntry ::=
+    SEQUENCE {
+        dot1qFdbId
+            Unsigned32,
+        dot1qFdbDynamicCount
+            Counter32
+    }
+
+dot1qFdbId OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The identity of this Filtering Database."
+    ::= { dot1qFdbEntry 1 }
+
+dot1qFdbDynamicCount OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The current number of dynamic entries in this
+        Filtering Database."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.1.1.3"
+    ::= { dot1qFdbEntry 2 }
+
+-- -------------------------------------------------------------
+-- Multiple Forwarding Databases for 802.1Q Transparent Devices
+-- This table is an alternative to the dot1dTpFdbTable,
+-- previously defined for 802.1D devices that only support a
+-- single Forwarding Database.
+-- -------------------------------------------------------------
+
+dot1qTpFdbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qTpFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about unicast entries
+        for which the device has forwarding and/or filtering
+        information.  This information is used by the
+        transparent bridging function in determining how to
+        propagate a received frame."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.7"
+    ::= { dot1qTp 2 }
+
+dot1qTpFdbEntry OBJECT-TYPE
+    SYNTAX      Dot1qTpFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a specific unicast MAC address for
+        which the device has some forwarding and/or filtering
+        information."
+    INDEX   { dot1qFdbId, dot1qTpFdbAddress }
+    ::= { dot1qTpFdbTable 1 }
+
+Dot1qTpFdbEntry ::=
+    SEQUENCE {
+        dot1qTpFdbAddress
+            MacAddress,
+        dot1qTpFdbPort
+            Integer32,
+        dot1qTpFdbStatus
+            INTEGER
+    }
+
+dot1qTpFdbAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unicast MAC address for which the device has
+        forwarding and/or filtering information."
+    ::= { dot1qTpFdbEntry 1 }
+
+dot1qTpFdbPort OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0', or the port number of the port on
+        which a frame having a source address equal to the value
+        of the corresponding instance of dot1qTpFdbAddress has
+        been seen.  A value of '0' indicates that the port
+        number has not been learned but that the device does
+        have some forwarding/filtering information about this
+        address (e.g., in the dot1qStaticUnicastTable).
+        Implementors are encouraged to assign the port value to
+        this object whenever it is learned, even for addresses
+        for which the corresponding value of dot1qTpFdbStatus is
+        not learned(3)."
+    ::= { dot1qTpFdbEntry 2 }
+
+dot1qTpFdbStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    learned(3),
+                    self(4),
+                    mgmt(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The status of this entry.  The meanings of the values
+        are:
+            other(1) - none of the following.  This may include
+                the case where some other MIB object (not the
+                corresponding instance of dot1qTpFdbPort, nor an
+                entry in the dot1qStaticUnicastTable) is being
+                used to determine if and how frames addressed to
+                the value of the corresponding instance of
+                dot1qTpFdbAddress are being forwarded.
+            invalid(2) - this entry is no longer valid (e.g., it
+
+                was learned but has since aged out), but has not
+                yet been flushed from the table.
+            learned(3) - the value of the corresponding instance
+                of dot1qTpFdbPort was learned and is being used.
+            self(4) - the value of the corresponding instance of
+                dot1qTpFdbAddress represents one of the device's
+                addresses.  The corresponding instance of
+                dot1qTpFdbPort indicates which of the device's
+                ports has this address.
+            mgmt(5) - the value of the corresponding instance of
+                dot1qTpFdbAddress is also the value of an
+                existing instance of dot1qStaticAddress."
+    ::= { dot1qTpFdbEntry 3 }
+
+-- -------------------------------------------------------------
+-- Dynamic Group Registration Table
+-- -------------------------------------------------------------
+
+dot1qTpGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qTpGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing filtering information for VLANs
+        configured into the bridge by (local or network)
+        management, or learned dynamically, specifying the set of
+        ports to which frames received on a VLAN for this FDB
+        and containing a specific Group destination address are
+        allowed to be forwarded."
+    ::= { dot1qTp 3 }
+
+dot1qTpGroupEntry OBJECT-TYPE
+    SYNTAX      Dot1qTpGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Filtering information configured into the bridge by
+        management, or learned dynamically, specifying the set of
+        ports to which frames received on a VLAN and containing
+        a specific Group destination address are allowed to be
+        forwarded.  The subset of these ports learned dynamically
+        is also provided."
+    INDEX   { dot1qVlanIndex, dot1qTpGroupAddress }
+    ::= { dot1qTpGroupTable 1 }
+
+Dot1qTpGroupEntry ::=
+    SEQUENCE {
+        dot1qTpGroupAddress
+
+            MacAddress,
+        dot1qTpGroupEgressPorts
+            PortList,
+        dot1qTpGroupLearnt
+            PortList
+    }
+
+dot1qTpGroupAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The destination Group MAC address in a frame to which
+        this entry's filtering information applies."
+    ::= { dot1qTpGroupEntry 1 }
+
+dot1qTpGroupEgressPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The complete set of ports, in this VLAN, to which
+        frames destined for this Group MAC address are currently
+        being explicitly forwarded.  This does not include ports
+        for which this address is only implicitly forwarded, in
+        the dot1qForwardAllPorts list."
+    ::= { dot1qTpGroupEntry 2 }
+
+dot1qTpGroupLearnt OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The subset of ports in dot1qTpGroupEgressPorts that
+        were learned by GMRP or some other dynamic mechanism, in
+        this Filtering database."
+    ::= { dot1qTpGroupEntry 3 }
+
+-- -------------------------------------------------------------
+-- Service Requirements subtree
+-- -------------------------------------------------------------
+
+dot1qForwardAllTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qForwardAllEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing forwarding information for each
+
+        VLAN, specifying the set of ports to which forwarding of
+        all multicasts applies, configured statically by
+        management or dynamically by GMRP.  An entry appears in
+        this table for all VLANs that are currently
+        instantiated."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
+    ::= { dot1qTp 4 }
+
+dot1qForwardAllEntry OBJECT-TYPE
+    SYNTAX      Dot1qForwardAllEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Forwarding information for a VLAN, specifying the set
+        of ports to which all multicasts should be forwarded,
+        configured statically by management or dynamically by
+        GMRP."
+    INDEX   { dot1qVlanIndex }
+    ::= { dot1qForwardAllTable 1 }
+
+Dot1qForwardAllEntry ::=
+    SEQUENCE {
+        dot1qForwardAllPorts
+            PortList,
+        dot1qForwardAllStaticPorts
+            PortList,
+        dot1qForwardAllForbiddenPorts
+            PortList
+    }
+
+dot1qForwardAllPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The complete set of ports in this VLAN to which all
+        multicast group-addressed frames are to be forwarded.
+        This includes ports for which this need has been
+        determined dynamically by GMRP, or configured statically
+        by management."
+    ::= { dot1qForwardAllEntry 1 }
+
+dot1qForwardAllStaticPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports configured by management in this VLAN
+        to which all multicast group-addressed frames are to be
+        forwarded.  Ports entered in this list will also appear
+        in the complete set shown by dot1qForwardAllPorts.  This
+        value will be restored after the device is reset.  This
+        only applies to ports that are members of the VLAN,
+        defined by dot1qVlanCurrentEgressPorts.  A port may not
+        be added in this set if it is already a member of the
+        set of ports in dot1qForwardAllForbiddenPorts.  The
+        default value is a string of ones of appropriate length,
+        to indicate the standard behaviour of using basic
+        filtering services, i.e., forward all multicasts to all
+        ports.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qForwardAllEntry 2 }
+
+dot1qForwardAllForbiddenPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports configured by management in this VLAN
+        for which the Service Requirement attribute Forward All
+        Multicast Groups may not be dynamically registered by
+        GMRP.  This value will be restored after the device is
+        reset.  A port may not be added in this set if it is
+        already a member of the set of ports in
+        dot1qForwardAllStaticPorts.  The default value is a
+        string of zeros of appropriate length.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qForwardAllEntry 3 }
+
+dot1qForwardUnregisteredTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qForwardUnregisteredEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing forwarding information for each
+        VLAN, specifying the set of ports to which forwarding of
+        multicast group-addressed frames for which no
+        more specific forwarding information applies.  This is
+        configured statically by management and determined
+        dynamically by GMRP.  An entry appears in this table for
+        all VLANs that are currently instantiated."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
+    ::= { dot1qTp 5 }
+
+dot1qForwardUnregisteredEntry OBJECT-TYPE
+    SYNTAX      Dot1qForwardUnregisteredEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Forwarding information for a VLAN, specifying the set
+        of ports to which all multicasts for which there is no
+        more specific forwarding information shall be forwarded.
+        This is configured statically by management or
+        dynamically by GMRP."
+    INDEX   { dot1qVlanIndex }
+    ::= { dot1qForwardUnregisteredTable 1 }
+
+Dot1qForwardUnregisteredEntry ::=
+    SEQUENCE {
+        dot1qForwardUnregisteredPorts
+            PortList,
+        dot1qForwardUnregisteredStaticPorts
+            PortList,
+        dot1qForwardUnregisteredForbiddenPorts
+            PortList
+    }
+
+dot1qForwardUnregisteredPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The complete set of ports in this VLAN to which
+        multicast group-addressed frames for which there is no
+        more specific forwarding information will be forwarded.
+        This includes ports for which this need has been
+        determined dynamically by GMRP, or configured statically
+        by management."
+    ::= { dot1qForwardUnregisteredEntry 1 }
+
+dot1qForwardUnregisteredStaticPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports configured by management, in this
+        VLAN, to which multicast group-addressed frames for
+        which there is no more specific forwarding information
+
+        are to be forwarded.  Ports entered in this list will
+        also appear in the complete set shown by
+        dot1qForwardUnregisteredPorts.  This value will be
+        restored after the device is reset.  A port may not be
+        added in this set if it is already a member of the set
+        of ports in dot1qForwardUnregisteredForbiddenPorts.  The
+        default value is a string of zeros of appropriate
+        length, although this has no effect with the default
+        value of dot1qForwardAllStaticPorts.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qForwardUnregisteredEntry 2 }
+
+dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports configured by management in this VLAN
+        for which the Service Requirement attribute Forward
+        Unregistered Multicast Groups may not be dynamically
+        registered by GMRP.  This value will be restored after
+        the device is reset.  A port may not be added in this
+        set if it is already a member of the set of ports in
+        dot1qForwardUnregisteredStaticPorts.  The default value
+        is a string of zeros of appropriate length.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qForwardUnregisteredEntry 3 }
+
+-- -------------------------------------------------------------
+-- The Static (Destination-Address Filtering) Database
+-- -------------------------------------------------------------
+
+dot1qStaticUnicastTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qStaticUnicastEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing filtering information for Unicast
+        MAC addresses for each Filtering Database, configured
+        into the device by (local or network) management
+        specifying the set of ports to which frames received
+        from specific ports and containing specific unicast
+        destination addresses are allowed to be forwarded.  A
+        value of zero in this table (as the port number from
+
+        which frames with a specific destination address are
+        received) is used to specify all ports for which there
+        is no specific entry in this table for that particular
+        destination address.  Entries are valid for unicast
+        addresses only."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.7,
+        ISO/IEC 15802-3 Section 7.9.1"
+    ::= { dot1qStatic 1 }
+
+dot1qStaticUnicastEntry OBJECT-TYPE
+    SYNTAX      Dot1qStaticUnicastEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Filtering information configured into the device by
+        (local or network) management specifying the set of
+        ports to which frames received from a specific port and
+        containing a specific unicast destination address are
+        allowed to be forwarded."
+    INDEX   {
+        dot1qFdbId,
+        dot1qStaticUnicastAddress,
+        dot1qStaticUnicastReceivePort
+    }
+    ::= { dot1qStaticUnicastTable 1 }
+
+Dot1qStaticUnicastEntry ::=
+    SEQUENCE {
+        dot1qStaticUnicastAddress
+            MacAddress,
+        dot1qStaticUnicastReceivePort
+            Integer32,
+        dot1qStaticUnicastAllowedToGoTo
+            PortList,
+        dot1qStaticUnicastStatus
+            INTEGER
+    }
+
+dot1qStaticUnicastAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The destination MAC address in a frame to which this
+        entry's filtering information applies.  This object must
+        take the value of a unicast address."
+    ::= { dot1qStaticUnicastEntry 1 }
+
+dot1qStaticUnicastReceivePort OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0' or the port number of the port
+        from which a frame must be received in order for this
+        entry's filtering information to apply.  A value of zero
+        indicates that this entry applies on all ports of the
+        device for which there is no other applicable entry."
+    ::= { dot1qStaticUnicastEntry 2 }
+
+dot1qStaticUnicastAllowedToGoTo OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports for which a frame with a specific
+        unicast address will be flooded in the event that it
+        has not been learned.  It also specifies the set of
+        ports on which a specific unicast address may be dynamically
+        learned.  The dot1qTpFdbTable will have an equivalent
+        entry with a dot1qTpFdbPort value of '0' until this
+        address has been learned, at which point it will be updated
+        with the port the address has been seen on.  This only
+        applies to ports that are members of the VLAN, defined
+        by dot1qVlanCurrentEgressPorts.  The default value of
+        this object is a string of ones of appropriate length.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
+    ::= { dot1qStaticUnicastEntry 3 }
+
+dot1qStaticUnicastStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    permanent(3),
+                    deleteOnReset(4),
+                    deleteOnTimeout(5)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry.
+            other(1) - this entry is currently in use, but
+
+                the conditions under which it will remain
+                so differ from the following values.
+            invalid(2) - writing this value to the object
+                removes the corresponding entry.
+            permanent(3) - this entry is currently in use
+                and will remain so after the next reset of
+                the bridge.
+            deleteOnReset(4) - this entry is currently in
+                use and will remain so until the next
+                reset of the bridge.
+            deleteOnTimeout(5) - this entry is currently in
+                use and will remain so until it is aged out.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { permanent }
+    ::= { dot1qStaticUnicastEntry 4 }
+
+dot1qStaticMulticastTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qStaticMulticastEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing filtering information for Multicast
+        and Broadcast MAC addresses for each VLAN, configured
+        into the device by (local or network) management
+        specifying the set of ports to which frames received
+        from specific ports and containing specific Multicast
+        and Broadcast destination addresses are allowed to be
+        forwarded.  A value of zero in this table (as the port
+        number from which frames with a specific destination
+        address are received) is used to specify all ports for
+        which there is no specific entry in this table for that
+        particular destination address.  Entries are valid for
+        Multicast and Broadcast addresses only."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.7,
+        ISO/IEC 15802-3 Section 7.9.1"
+    ::= { dot1qStatic 2 }
+
+dot1qStaticMulticastEntry OBJECT-TYPE
+    SYNTAX      Dot1qStaticMulticastEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Filtering information configured into the device by
+        (local or network) management specifying the set of
+        ports to which frames received from this specific port
+
+        for this VLAN and containing this Multicast or Broadcast
+        destination address are allowed to be forwarded."
+    INDEX   {
+        dot1qVlanIndex,
+        dot1qStaticMulticastAddress,
+        dot1qStaticMulticastReceivePort
+    }
+    ::= { dot1qStaticMulticastTable 1 }
+
+Dot1qStaticMulticastEntry ::=
+    SEQUENCE {
+        dot1qStaticMulticastAddress
+            MacAddress,
+        dot1qStaticMulticastReceivePort
+            Integer32,
+        dot1qStaticMulticastStaticEgressPorts
+            PortList,
+        dot1qStaticMulticastForbiddenEgressPorts
+            PortList,
+        dot1qStaticMulticastStatus
+            INTEGER
+    }
+
+dot1qStaticMulticastAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The destination MAC address in a frame to which this
+        entry's filtering information applies.  This object must
+        take the value of a Multicast or Broadcast address."
+    ::= { dot1qStaticMulticastEntry 1 }
+
+dot1qStaticMulticastReceivePort OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0' or the port number of the port
+        from which a frame must be received in order for this
+        entry's filtering information to apply.  A value of zero
+        indicates that this entry applies on all ports of the
+        device for which there is no other applicable entry."
+    ::= { dot1qStaticMulticastEntry 2 }
+
+dot1qStaticMulticastStaticEgressPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports to which frames received from a
+        specific port and destined for a specific Multicast or
+        Broadcast MAC address must be forwarded, regardless of
+        any dynamic information, e.g., from GMRP.  A port may not
+        be added in this set if it is already a member of the
+        set of ports in dot1qStaticMulticastForbiddenEgressPorts.
+        The default value of this object is a string of ones of
+        appropriate length.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qStaticMulticastEntry 3 }
+
+dot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The set of ports to which frames received from a
+        specific port and destined for a specific Multicast or
+        Broadcast MAC address must not be forwarded, regardless
+        of any dynamic information, e.g., from GMRP.  A port may
+        not be added in this set if it is already a member of the
+        set of ports in dot1qStaticMulticastStaticEgressPorts.
+        The default value of this object is a string of zeros of
+        appropriate length.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qStaticMulticastEntry 4 }
+
+dot1qStaticMulticastStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    permanent(3),
+                    deleteOnReset(4),
+                    deleteOnTimeout(5)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry.
+            other(1) - this entry is currently in use, but
+                the conditions under which it will remain
+                so differ from the following values.
+
+            invalid(2) - writing this value to the object
+                removes the corresponding entry.
+            permanent(3) - this entry is currently in use
+                and will remain so after the next reset of
+                the bridge.
+            deleteOnReset(4) - this entry is currently in
+                use and will remain so until the next
+                reset of the bridge.
+            deleteOnTimeout(5) - this entry is currently in
+                use and will remain so until it is aged out.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { permanent }
+    ::= { dot1qStaticMulticastEntry 5 }
+
+-- -------------------------------------------------------------
+-- The Current VLAN Database
+-- -------------------------------------------------------------
+
+dot1qVlanNumDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times a VLAN entry has been deleted from
+        the dot1qVlanCurrentTable (for any reason).  If an entry
+        is deleted, then inserted, and then deleted, this
+        counter will be incremented by 2."
+    ::= { dot1qVlan 1 }
+
+dot1qVlanCurrentTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qVlanCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing current configuration information
+        for each VLAN currently configured into the device by
+        (local or network) management, or dynamically created
+        as a result of GVRP requests received."
+    ::= { dot1qVlan 2 }
+
+dot1qVlanCurrentEntry OBJECT-TYPE
+    SYNTAX      Dot1qVlanCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information for a VLAN configured into the device by
+
+        (local or network) management, or dynamically created
+        as a result of GVRP requests received."
+    INDEX   { dot1qVlanTimeMark, dot1qVlanIndex }
+    ::= { dot1qVlanCurrentTable 1 }
+
+Dot1qVlanCurrentEntry ::=
+    SEQUENCE {
+        dot1qVlanTimeMark
+            TimeFilter,
+        dot1qVlanIndex
+            VlanIndex,
+        dot1qVlanFdbId
+            Unsigned32,
+        dot1qVlanCurrentEgressPorts
+            PortList,
+        dot1qVlanCurrentUntaggedPorts
+            PortList,
+        dot1qVlanStatus
+            INTEGER,
+        dot1qVlanCreationTime
+            TimeTicks
+    }
+
+dot1qVlanTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter
+        textual convention to see how this works."
+    ::= { dot1qVlanCurrentEntry 1 }
+
+dot1qVlanIndex OBJECT-TYPE
+    SYNTAX      VlanIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The VLAN-ID or other identifier referring to this VLAN."
+    ::= { dot1qVlanCurrentEntry 2 }
+
+dot1qVlanFdbId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Filtering Database used by this VLAN.  This is one
+        of the dot1qFdbId values in the dot1qFdbTable.  This
+        value is allocated automatically by the device whenever
+
+        the VLAN is created: either dynamically by GVRP, or by
+        management, in dot1qVlanStaticTable.  Allocation of this
+        value follows the learning constraints defined for this
+        VLAN in dot1qLearningConstraintsTable."
+    ::= { dot1qVlanCurrentEntry 3 }
+
+dot1qVlanCurrentEgressPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The set of ports that are transmitting traffic for
+        this VLAN as either tagged or untagged frames."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.2.1"
+    ::= { dot1qVlanCurrentEntry 4 }
+
+dot1qVlanCurrentUntaggedPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The set of ports that are transmitting traffic for
+        this VLAN as untagged frames."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.2.1"
+    ::= { dot1qVlanCurrentEntry 5 }
+
+dot1qVlanStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    permanent(2),
+                    dynamicGvrp(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry.
+            other(1) - this entry is currently in use, but the
+                conditions under which it will remain so differ
+                from the following values.
+            permanent(2) - this entry, corresponding to an entry
+                in dot1qVlanStaticTable, is currently in use and
+                will remain so after the next reset of the
+                device.  The port lists for this entry include
+                ports from the equivalent dot1qVlanStaticTable
+                entry and ports learned dynamically.
+            dynamicGvrp(3) - this entry is currently in use
+
+                and will remain so until removed by GVRP.  There
+                is no static entry for this VLAN, and it will be
+                removed when the last port leaves the VLAN."
+    ::= { dot1qVlanCurrentEntry 6 }
+
+dot1qVlanCreationTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when this VLAN was created."
+    ::= { dot1qVlanCurrentEntry 7 }
+
+-- -------------------------------------------------------------
+-- The Static VLAN Database
+-- -------------------------------------------------------------
+
+dot1qVlanStaticTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qVlanStaticEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing static configuration information for
+        each VLAN configured into the device by (local or
+        network) management.  All entries are permanent and will
+        be restored after the device is reset."
+    ::= { dot1qVlan 3 }
+
+dot1qVlanStaticEntry OBJECT-TYPE
+    SYNTAX      Dot1qVlanStaticEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Static information for a VLAN configured into the
+        device by (local or network) management."
+    INDEX   { dot1qVlanIndex }
+    ::= { dot1qVlanStaticTable 1 }
+
+Dot1qVlanStaticEntry ::=
+    SEQUENCE {
+        dot1qVlanStaticName
+            SnmpAdminString,
+        dot1qVlanStaticEgressPorts
+            PortList,
+        dot1qVlanForbiddenEgressPorts
+            PortList,
+        dot1qVlanStaticUntaggedPorts
+            PortList,
+        dot1qVlanStaticRowStatus
+            RowStatus
+    }
+
+dot1qVlanStaticName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An administratively assigned string, which may be used
+        to identify the VLAN."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.2.1"
+    ::= { dot1qVlanStaticEntry 1 }
+
+dot1qVlanStaticEgressPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of ports that are permanently assigned to the
+        egress list for this VLAN by management.  Changes to a
+        bit in this object affect the per-port, per-VLAN
+        Registrar control for Registration Fixed for the
+        relevant GVRP state machine on each port.  A port may
+        not be added in this set if it is already a member of
+        the set of ports in dot1qVlanForbiddenEgressPorts.  The
+        default value of this object is a string of zeros of
+        appropriate length, indicating not fixed."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
+    ::= { dot1qVlanStaticEntry 2 }
+
+dot1qVlanForbiddenEgressPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of ports that are prohibited by management
+        from being included in the egress list for this VLAN.
+        Changes to this object that cause a port to be included
+        or excluded affect the per-port, per-VLAN Registrar
+        control for Registration Forbidden for the relevant GVRP
+        state machine on each port.  A port may not be added in
+        this set if it is already a member of the set of ports
+        in dot1qVlanStaticEgressPorts.  The default value of
+        this object is a string of zeros of appropriate length,
+        excluding all ports from the forbidden set."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
+    ::= { dot1qVlanStaticEntry 3 }
+
+dot1qVlanStaticUntaggedPorts OBJECT-TYPE
+    SYNTAX      PortList
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of ports that should transmit egress packets
+        for this VLAN as untagged.  The default value of this
+        object for the default VLAN (dot1qVlanIndex = 1) is a string
+        of appropriate length including all ports.  There is no
+        specified default for other VLANs.  If a device agent cannot
+        support the set of ports being set, then it will reject the
+        set operation with an error.  For example, a
+        manager might attempt to set more than one VLAN to be untagged
+        on egress where the device does not support this IEEE 802.1Q
+        option."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.2.1"
+    ::= { dot1qVlanStaticEntry 4 }
+
+dot1qVlanStaticRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry."
+    ::= { dot1qVlanStaticEntry 5 }
+
+dot1qNextFreeLocalVlanIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0|4096..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The next available value for dot1qVlanIndex of a local
+        VLAN entry in dot1qVlanStaticTable.  This will report
+        values >=4096 if a new Local VLAN may be created or else
+        the value 0 if this is not possible.
+
+        A row creation operation in this table for an entry with a local
+        VlanIndex value may fail if the current value of this object
+        is not used as the index.  Even if the value read is used,
+        there is no guarantee that it will still be the valid index
+        when the create operation is attempted; another manager may
+        have already got in during the intervening time interval.
+        In this case, dot1qNextFreeLocalVlanIndex should be re-read
+
+        and the creation re-tried with the new value.
+
+        This value will automatically change when the current value is
+        used to create a new row."
+    ::= { dot1qVlan 4 }
+
+-- -------------------------------------------------------------
+-- The VLAN Port Configuration Table
+-- -------------------------------------------------------------
+
+dot1qPortVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qPortVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing per-port control and status
+        information for VLAN configuration in the device."
+    ::= { dot1qVlan 5 }
+
+dot1qPortVlanEntry OBJECT-TYPE
+    SYNTAX      Dot1qPortVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information controlling VLAN configuration for a port
+        on the device.  This is indexed by dot1dBasePort."
+    AUGMENTS { dot1dBasePortEntry }
+    ::= { dot1qPortVlanTable 1 }
+
+Dot1qPortVlanEntry ::=
+    SEQUENCE {
+        dot1qPvid
+            VlanIndex,
+        dot1qPortAcceptableFrameTypes
+            INTEGER,
+        dot1qPortIngressFiltering
+            TruthValue,
+        dot1qPortGvrpStatus
+            EnabledStatus,
+        dot1qPortGvrpFailedRegistrations
+            Counter32,
+        dot1qPortGvrpLastPduOrigin
+            MacAddress,
+        dot1qPortRestrictedVlanRegistration
+            TruthValue
+    }
+
+dot1qPvid OBJECT-TYPE
+    SYNTAX      VlanIndex
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The PVID, the VLAN-ID assigned to untagged frames or
+        Priority-Tagged frames received on this port.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.1.1"
+    DEFVAL      { 1 }
+    ::= { dot1qPortVlanEntry 1 }
+
+dot1qPortAcceptableFrameTypes OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    admitAll(1),
+                    admitOnlyVlanTagged(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When this is admitOnlyVlanTagged(2), the device will
+        discard untagged frames or Priority-Tagged frames
+        received on this port.  When admitAll(1), untagged
+        frames or Priority-Tagged frames received on this port
+        will be accepted and assigned to a VID based on the
+        PVID and VID Set for this port.
+
+        This control does not affect VLAN-independent Bridge
+        Protocol Data Unit (BPDU) frames, such as GVRP and
+        Spanning Tree Protocol (STP).  It does affect VLAN-
+        dependent BPDU frames, such as GMRP.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.1.3"
+    DEFVAL      { admitAll }
+    ::= { dot1qPortVlanEntry 2 }
+
+dot1qPortIngressFiltering OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When this is true(1), the device will discard incoming
+        frames for VLANs that do not include this Port in its
+
+        Member set.  When false(2), the port will accept all
+        incoming frames.
+
+        This control does not affect VLAN-independent BPDU
+        frames, such as GVRP and STP.  It does affect VLAN-
+        dependent BPDU frames, such as GMRP.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.1.4"
+    DEFVAL      { false }
+    ::= { dot1qPortVlanEntry 3 }
+
+dot1qPortGvrpStatus OBJECT-TYPE
+    SYNTAX      EnabledStatus
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The state of GVRP operation on this port.  The value
+        enabled(1) indicates that GVRP is enabled on this port,
+        as long as dot1qGvrpStatus is also enabled for this
+        device.  When disabled(2) but dot1qGvrpStatus is still
+        enabled for the device, GVRP is disabled on this port:
+        any GVRP packets received will be silently discarded, and
+        no GVRP registrations will be propagated from other
+        ports.  This object affects all GVRP Applicant and
+        Registrar state machines on this port.  A transition
+        from disabled(2) to enabled(1) will cause a reset of all
+        GVRP state machines on this port.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    DEFVAL      { enabled }
+    ::= { dot1qPortVlanEntry 4 }
+
+dot1qPortGvrpFailedRegistrations OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of failed GVRP registrations, for any
+        reason, on this port."
+    ::= { dot1qPortVlanEntry 5 }
+
+dot1qPortGvrpLastPduOrigin OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Source MAC Address of the last GVRP message
+        received on this port."
+    ::= { dot1qPortVlanEntry 6 }
+
+dot1qPortRestrictedVlanRegistration OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The state of Restricted VLAN Registration on this port.
+         If the value of this control is true(1), then creation
+         of a new dynamic VLAN entry is permitted only if there
+         is a Static VLAN Registration Entry for the VLAN concerned,
+         in which the Registrar Administrative Control value for
+         this port is Normal Registration.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1u clause 11.2.3.2.3, 12.10.1.7."
+    DEFVAL      { false }
+    ::= { dot1qPortVlanEntry 7 }
+
+-- -------------------------------------------------------------
+-- Per port VLAN Statistics Table
+-- -------------------------------------------------------------
+
+dot1qPortVlanStatisticsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qPortVlanStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing per-port, per-VLAN statistics for
+        traffic received.  Separate objects are provided for both the
+        most-significant and least-significant bits of statistics
+        counters for ports that are associated with this transparent
+        bridge.  The most-significant bit objects are only required on
+        high-capacity interfaces, as defined in the conformance clauses
+        for these objects.  This mechanism is provided as a way to read
+        64-bit counters for agents that support only SNMPv1.
+
+        Note that the reporting of most-significant and least-
+        significant counter bits separately runs the risk of missing
+        an overflow of the lower bits in the interval between sampling.
+        The manager must be aware of this possibility, even within the
+        same varbindlist, when interpreting the results of a request or
+
+        asynchronous notification."
+    ::= { dot1qVlan 6 }
+
+dot1qPortVlanStatisticsEntry OBJECT-TYPE
+    SYNTAX      Dot1qPortVlanStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Traffic statistics for a VLAN on an interface."
+    INDEX   { dot1dBasePort, dot1qVlanIndex }
+    ::= { dot1qPortVlanStatisticsTable 1 }
+
+Dot1qPortVlanStatisticsEntry ::=
+    SEQUENCE {
+        dot1qTpVlanPortInFrames
+            Counter32,
+        dot1qTpVlanPortOutFrames
+            Counter32,
+        dot1qTpVlanPortInDiscards
+            Counter32,
+        dot1qTpVlanPortInOverflowFrames
+            Counter32,
+        dot1qTpVlanPortOutOverflowFrames
+            Counter32,
+        dot1qTpVlanPortInOverflowDiscards
+            Counter32
+    }
+
+dot1qTpVlanPortInFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of valid frames received by this port from
+        its segment that were classified as belonging to this
+        VLAN.  Note that a frame received on this port is
+        counted by this object if and only if it is for a
+        protocol being processed by the local forwarding process
+        for this VLAN.  This object includes received bridge
+        management frames classified as belonging to this VLAN
+        (e.g., GMRP, but not GVRP or STP."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.6.1.1.3(a)"
+    ::= { dot1qPortVlanStatisticsEntry 1 }
+
+dot1qTpVlanPortOutFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of valid frames transmitted by this port to
+        its segment from the local forwarding process for this
+        VLAN.  This includes bridge management frames originated
+        by this device that are classified as belonging to this
+        VLAN (e.g., GMRP, but not GVRP or STP)."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.6.1.1.3(d)"
+    ::= { dot1qPortVlanStatisticsEntry 2 }
+
+dot1qTpVlanPortInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of valid frames received by this port from
+        its segment that were classified as belonging to this
+        VLAN and that were discarded due to VLAN-related reasons.
+        Specifically, the IEEE 802.1Q counters for Discard
+        Inbound and Discard on Ingress Filtering."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.6.1.1.3"
+    ::= { dot1qPortVlanStatisticsEntry 3 }
+
+dot1qTpVlanPortInOverflowFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        dot1qTpVlanPortInFrames counter has overflowed."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1qPortVlanStatisticsEntry 4 }
+
+dot1qTpVlanPortOutOverflowFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        dot1qTpVlanPortOutFrames counter has overflowed."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1qPortVlanStatisticsEntry 5 }
+
+dot1qTpVlanPortInOverflowDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        dot1qTpVlanPortInDiscards counter has overflowed."
+    REFERENCE
+        "ISO/IEC 15802-3 Section 14.6.1.1.3"
+    ::= { dot1qPortVlanStatisticsEntry 6 }
+
+dot1qPortVlanHCStatisticsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qPortVlanHCStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing per-port, per-VLAN statistics for
+        traffic on high-capacity interfaces."
+    ::= { dot1qVlan 7 }
+
+dot1qPortVlanHCStatisticsEntry OBJECT-TYPE
+    SYNTAX      Dot1qPortVlanHCStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Traffic statistics for a VLAN on a high-capacity
+        interface."
+    INDEX   { dot1dBasePort, dot1qVlanIndex }
+    ::= { dot1qPortVlanHCStatisticsTable 1 }
+
+Dot1qPortVlanHCStatisticsEntry ::=
+    SEQUENCE {
+        dot1qTpVlanPortHCInFrames
+            Counter64,
+        dot1qTpVlanPortHCOutFrames
+            Counter64,
+        dot1qTpVlanPortHCInDiscards
+            Counter64
+    }
+
+dot1qTpVlanPortHCInFrames OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of valid frames received by this port from
+        its segment that were classified as belonging to this
+        VLAN.  Note that a frame received on this port is
+        counted by this object if and only if it is for a
+
+        protocol being processed by the local forwarding process
+        for this VLAN.  This object includes received bridge
+        management frames classified as belonging to this VLAN
+        (e.g., GMRP, but not GVRP or STP)."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.6.1.1.3(a)"
+    ::= { dot1qPortVlanHCStatisticsEntry 1 }
+
+dot1qTpVlanPortHCOutFrames OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of valid frames transmitted by this port to
+        its segment from the local forwarding process for this
+        VLAN.  This includes bridge management frames originated
+        by this device that are classified as belonging to this
+        VLAN (e.g., GMRP, but not GVRP or STP)."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.6.1.1.3(d)"
+    ::= { dot1qPortVlanHCStatisticsEntry 2 }
+
+dot1qTpVlanPortHCInDiscards OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of valid frames received by this port from
+        its segment that were classified as belonging to this
+        VLAN and that were discarded due to VLAN-related reasons.
+        Specifically, the IEEE 802.1Q counters for Discard
+        Inbound and Discard on Ingress Filtering."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.6.1.1.3"
+    ::= { dot1qPortVlanHCStatisticsEntry 3 }
+
+-- -------------------------------------------------------------
+-- The VLAN Learning Constraints Table
+-- -------------------------------------------------------------
+
+dot1qLearningConstraintsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1qLearningConstraintsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing learning constraints for sets of
+        Shared and Independent VLANs."
+    REFERENCE
+        "IEEE 802.1Q/D11 Section 12.10.3.1"
+    ::= { dot1qVlan 8 }
+
+dot1qLearningConstraintsEntry OBJECT-TYPE
+    SYNTAX      Dot1qLearningConstraintsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A learning constraint defined for a VLAN."
+    INDEX   { dot1qConstraintVlan, dot1qConstraintSet }
+    ::= { dot1qLearningConstraintsTable 1 }
+
+Dot1qLearningConstraintsEntry ::=
+    SEQUENCE {
+        dot1qConstraintVlan
+            VlanIndex,
+        dot1qConstraintSet
+            Integer32,
+        dot1qConstraintType
+            INTEGER,
+        dot1qConstraintStatus
+            RowStatus
+    }
+
+dot1qConstraintVlan OBJECT-TYPE
+    SYNTAX      VlanIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index of the row in dot1qVlanCurrentTable for the
+        VLAN constrained by this entry."
+    ::= { dot1qLearningConstraintsEntry 1 }
+
+dot1qConstraintSet OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The identity of the constraint set to which
+        dot1qConstraintVlan belongs.  These values may be chosen
+        by the management station."
+    ::= { dot1qLearningConstraintsEntry 2 }
+
+dot1qConstraintType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    independent(1),
+                    shared(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of constraint this entry defines.
+            independent(1) - the VLAN, dot1qConstraintVlan,
+                uses a filtering database independent from all
+                other VLANs in the same set, defined by
+                dot1qConstraintSet.
+            shared(2) - the VLAN, dot1qConstraintVlan, shares
+                the same filtering database as all other VLANs
+                in the same set, defined by dot1qConstraintSet."
+    ::= { dot1qLearningConstraintsEntry 3 }
+
+dot1qConstraintStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this entry."
+    ::= { dot1qLearningConstraintsEntry 4 }
+
+dot1qConstraintSetDefault OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The identity of the constraint set to which a VLAN
+        belongs, if there is not an explicit entry for that VLAN
+        in dot1qLearningConstraintsTable.
+
+        The value of this object MUST be retained across
+        reinitializations of the management system."
+    ::= { dot1qVlan 9 }
+
+dot1qConstraintTypeDefault OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    independent(1),
+                    shared(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The type of constraint set to which a VLAN belongs, if
+        there is not an explicit entry for that VLAN in
+        dot1qLearningConstraintsTable.  The types are as defined
+        for dot1qConstraintType.
+
+        The value of this object MUST be retained across
+
+        reinitializations of the management system."
+    ::= { dot1qVlan 10 }
+
+-- -------------------------------------------------------------
+-- dot1vProtocol subtree
+-- -------------------------------------------------------------
+
+dot1vProtocolGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1vProtocolGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains mappings from Protocol
+         Templates to Protocol Group Identifiers used for
+         Port-and-Protocol-based VLAN Classification."
+    REFERENCE
+        "IEEE 802.1v clause 8.6.4"
+    ::= { dot1vProtocol 1 }
+
+dot1vProtocolGroupEntry OBJECT-TYPE
+    SYNTAX      Dot1vProtocolGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A mapping from a Protocol Template to a Protocol
+         Group Identifier."
+    INDEX       { dot1vProtocolTemplateFrameType,
+                  dot1vProtocolTemplateProtocolValue }
+    ::= { dot1vProtocolGroupTable 1 }
+
+Dot1vProtocolGroupEntry ::=
+    SEQUENCE {
+        dot1vProtocolTemplateFrameType
+            INTEGER,
+        dot1vProtocolTemplateProtocolValue
+            OCTET STRING,
+        dot1vProtocolGroupId
+            Integer32,
+        dot1vProtocolGroupRowStatus
+            RowStatus
+    }
+
+dot1vProtocolTemplateFrameType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  ethernet  (1),
+                  rfc1042   (2),
+                  snap8021H (3),
+                  snapOther (4),
+                  llcOther  (5)
+                }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The data-link encapsulation format or the
+         'detagged_frame_type' in a Protocol Template."
+    REFERENCE
+        "IEEE 802.1v clause 8.6.2"
+    ::= { dot1vProtocolGroupEntry 1 }
+
+dot1vProtocolTemplateProtocolValue OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (2 | 5))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The identification of the protocol above the data-link
+         layer in a Protocol Template.  Depending on the
+         frame type, the octet string will have one of the
+         following values:
+
+         For 'ethernet', 'rfc1042' and 'snap8021H',
+             this is the 16-bit (2-octet) IEEE 802.3 Type Field.
+         For 'snapOther',
+             this is the 40-bit (5-octet) PID.
+         For 'llcOther',
+             this is the 2-octet IEEE 802.2 Link Service Access
+             Point (LSAP) pair: first octet for Destination Service
+             Access Point (DSAP) and second octet for Source Service
+             Access Point (SSAP)."
+    REFERENCE
+        "IEEE 802.1v clause 8.6.2"
+    ::= { dot1vProtocolGroupEntry 2 }
+
+dot1vProtocolGroupId OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents a group of protocols that are associated
+         together when assigning a VID to a frame."
+    REFERENCE
+        "IEEE 802.1v clause 8.6.3, 12.10.2.1"
+    ::= { dot1vProtocolGroupEntry 3 }
+
+dot1vProtocolGroupRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry."
+    ::= { dot1vProtocolGroupEntry 4 }
+
+dot1vProtocolPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1vProtocolPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains VID sets used for
+         Port-and-Protocol-based VLAN Classification."
+    REFERENCE
+        "IEEE 802.1v clause 8.4.4"
+    ::= { dot1vProtocol 2 }
+
+dot1vProtocolPortEntry OBJECT-TYPE
+    SYNTAX      Dot1vProtocolPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A VID set for a port."
+    INDEX       { dot1dBasePort,
+                  dot1vProtocolPortGroupId }
+    ::= { dot1vProtocolPortTable 1 }
+
+Dot1vProtocolPortEntry ::=
+    SEQUENCE {
+        dot1vProtocolPortGroupId
+            Integer32,
+        dot1vProtocolPortGroupVid
+            Integer32,
+        dot1vProtocolPortRowStatus
+            RowStatus
+    }
+
+dot1vProtocolPortGroupId OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Designates a group of protocols in the Protocol
+         Group Database."
+    REFERENCE
+        "IEEE 802.1v clause 8.6.3, 12.10.1.2"
+    ::= { dot1vProtocolPortEntry 1 }
+
+dot1vProtocolPortGroupVid OBJECT-TYPE
+    SYNTAX      Integer32 (1..4094)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The VID associated with a group of protocols for
+         each port."
+    REFERENCE
+        "IEEE 802.1v clause 8.4.4, 12.10.1.2"
+    ::= { dot1vProtocolPortEntry 2 }
+
+dot1vProtocolPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry."
+    ::= { dot1vProtocolPortEntry 3 }
+
+-- -------------------------------------------------------------
+-- IEEE 802.1Q MIB - Conformance Information
+-- -------------------------------------------------------------
+
+qBridgeConformance OBJECT IDENTIFIER ::= { qBridgeMIB 2 }
+
+qBridgeGroups OBJECT IDENTIFIER ::= { qBridgeConformance 1 }
+
+qBridgeCompliances OBJECT IDENTIFIER ::= { qBridgeConformance 2 }
+
+-- -------------------------------------------------------------
+-- units of conformance
+-- -------------------------------------------------------------
+
+qBridgeBaseGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qVlanVersionNumber,
+        dot1qMaxVlanId,
+        dot1qMaxSupportedVlans,
+        dot1qNumVlans,
+        dot1qGvrpStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing device-level control
+        and status information for the Virtual LAN bridge
+        services."
+    ::= { qBridgeGroups 1 }
+
+qBridgeFdbUnicastGroup OBJECT-GROUP
+
+    OBJECTS {
+        dot1qFdbDynamicCount,
+        dot1qTpFdbPort,
+        dot1qTpFdbStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        unicast addresses, learned dynamically or statically
+        configured by management, in each Filtering Database."
+    ::= { qBridgeGroups 2 }
+
+qBridgeFdbMulticastGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qTpGroupEgressPorts,
+        dot1qTpGroupLearnt
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about all
+        multicast addresses, learned dynamically or statically
+        configured by management, in each Filtering Database."
+    ::= { qBridgeGroups 3 }
+
+qBridgeServiceRequirementsGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qForwardAllPorts,
+        dot1qForwardAllStaticPorts,
+        dot1qForwardAllForbiddenPorts,
+        dot1qForwardUnregisteredPorts,
+        dot1qForwardUnregisteredStaticPorts,
+        dot1qForwardUnregisteredForbiddenPorts
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+        service requirements, learned dynamically or statically
+        configured by management, in each Filtering Database."
+    ::= { qBridgeGroups 4 }
+
+qBridgeFdbStaticGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qStaticUnicastAllowedToGoTo,
+        dot1qStaticUnicastStatus,
+        dot1qStaticMulticastStaticEgressPorts,
+        dot1qStaticMulticastForbiddenEgressPorts,
+        dot1qStaticMulticastStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+        unicast and multicast addresses statically configured by
+        management, in each Filtering Database or VLAN."
+    ::= { qBridgeGroups 5 }
+
+qBridgeVlanGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qVlanNumDeletes,
+        dot1qVlanFdbId,
+        dot1qVlanCurrentEgressPorts,
+        dot1qVlanCurrentUntaggedPorts,
+        dot1qVlanStatus,
+        dot1qVlanCreationTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+        all VLANs currently configured on this device."
+    ::= { qBridgeGroups 6 }
+
+qBridgeVlanStaticGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qVlanStaticName,
+        dot1qVlanStaticEgressPorts,
+        dot1qVlanForbiddenEgressPorts,
+        dot1qVlanStaticUntaggedPorts,
+        dot1qVlanStaticRowStatus,
+        dot1qNextFreeLocalVlanIndex
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+        VLANs statically configured by management."
+    ::= { qBridgeGroups 7 }
+
+qBridgePortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qPvid,
+        dot1qPortAcceptableFrameTypes,
+        dot1qPortIngressFiltering,
+        dot1qPortGvrpStatus,
+        dot1qPortGvrpFailedRegistrations,
+        dot1qPortGvrpLastPduOrigin
+    }
+    STATUS      deprecated
+    DESCRIPTION
+        "A collection of objects providing port-level VLAN
+        control and status information for all ports."
+    ::= { qBridgeGroups 8 }
+
+qBridgeVlanStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qTpVlanPortInFrames,
+        dot1qTpVlanPortOutFrames,
+        dot1qTpVlanPortInDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing per-port packet
+        statistics for all VLANs currently configured on this
+        device."
+    ::= { qBridgeGroups 9 }
+
+qBridgeVlanStatisticsOverflowGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qTpVlanPortInOverflowFrames,
+        dot1qTpVlanPortOutOverflowFrames,
+        dot1qTpVlanPortInOverflowDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing overflow counters for
+        per-port packet statistics for all VLANs currently configured
+        on this device for high-capacity interfaces, defined as those
+        that have the value of the corresponding instance of
+        ifSpeed greater than 650,000,000 bits/second."
+    ::= { qBridgeGroups 10 }
+
+qBridgeVlanHCStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qTpVlanPortHCInFrames,
+        dot1qTpVlanPortHCOutFrames,
+        dot1qTpVlanPortHCInDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing per-port packet
+        statistics for all VLANs currently configured on this
+        device for high-capacity interfaces, defined as those
+        that have the value of the corresponding instance of
+        ifSpeed greater than 650,000,000 bits/second."
+    ::= { qBridgeGroups 11 }
+
+qBridgeLearningConstraintsGroup OBJECT-GROUP
+
+    OBJECTS {
+        dot1qConstraintType,
+        dot1qConstraintStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects defining the Filtering Database
+        constraints all VLANs have with each other."
+    ::= { qBridgeGroups 12 }
+
+qBridgeLearningConstraintDefaultGroup OBJECT-GROUP
+    OBJECTS {
+        dot1qConstraintSetDefault,
+        dot1qConstraintTypeDefault
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects defining the default Filtering
+        Database constraints for VLANs that have no specific
+        constraints defined."
+    ::= { qBridgeGroups 13 }
+
+qBridgeClassificationDeviceGroup OBJECT-GROUP
+    OBJECTS {
+        dot1vProtocolGroupId,
+        dot1vProtocolGroupRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "VLAN classification information for the bridge."
+    ::= { qBridgeGroups 14 }
+
+qBridgeClassificationPortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1vProtocolPortGroupVid,
+        dot1vProtocolPortRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "VLAN classification information for individual ports."
+    ::= { qBridgeGroups 15 }
+
+qBridgePortGroup2 OBJECT-GROUP
+    OBJECTS {
+        dot1qPvid,
+        dot1qPortAcceptableFrameTypes,
+        dot1qPortIngressFiltering,
+        dot1qPortGvrpStatus,
+        dot1qPortGvrpFailedRegistrations,
+        dot1qPortGvrpLastPduOrigin,
+        dot1qPortRestrictedVlanRegistration
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing port-level VLAN
+        control and status information for all ports."
+    ::= { qBridgeGroups 16 }
+
+-- -------------------------------------------------------------
+-- compliance statements
+-- -------------------------------------------------------------
+
+qBridgeCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+        "The compliance statement for device support of Virtual
+        LAN Bridge services.
+
+        RFC2674 was silent about the expected persistence of the
+        read-write objects in this MIB module.  Applications MUST
+        NOT assume that the values of the read-write objects are
+        persistent across reinitializations of the management
+        system and MUST NOT assume that the values are not
+        persistent across reinitializations of the management
+        system."
+
+    MODULE
+        MANDATORY-GROUPS {
+            qBridgeBaseGroup,
+            qBridgeVlanGroup,
+            qBridgeVlanStaticGroup,
+            qBridgePortGroup
+        }
+
+        GROUP       qBridgeFdbUnicastGroup
+        DESCRIPTION
+            "This group is mandatory for bridges that implement
+            802.1Q transparent bridging."
+
+        GROUP       qBridgeFdbMulticastGroup
+        DESCRIPTION
+            "This group is mandatory for bridges that implement
+            802.1Q transparent bridging."
+
+        GROUP       qBridgeServiceRequirementsGroup
+        DESCRIPTION
+            "This group is mandatory for bridges that implement
+            extended filtering services.  All objects must be
+            read-write if extended-filtering services are
+            enabled."
+
+        GROUP       qBridgeFdbStaticGroup
+        DESCRIPTION
+            "This group is optional."
+
+        GROUP       qBridgeVlanStatisticsGroup
+        DESCRIPTION
+            "This group is optional as there may be significant
+            implementation cost associated with its support."
+
+        GROUP       qBridgeVlanStatisticsOverflowGroup
+        DESCRIPTION
+            "This group is optional as there may be significant
+            implementation cost associated with its support.  It is most
+            relevant for high-capacity interfaces where the SNMP agent
+            supports only SNMPv1."
+
+        GROUP       qBridgeVlanHCStatisticsGroup
+        DESCRIPTION
+            "This group is optional as there may be significant
+            implementation cost associated with its support.  It is most
+            relevant for high-capacity interfaces."
+
+        GROUP       qBridgeLearningConstraintsGroup
+        DESCRIPTION
+            "This group is mandatory for devices implementing
+             both Independent VLAN Learning (IVL) and Shared
+             VLAN Learning (SVL) modes of operation of the
+             filtering database, as defined by IEEE 802.1Q."
+
+        GROUP       qBridgeLearningConstraintDefaultGroup
+        DESCRIPTION
+            "This group is mandatory for devices implementing
+             both Independent VLAN Learning (IVL) and Shared
+             VLAN Learning (SVL) modes of operation of the
+             filtering database, as defined by IEEE 802.1Q."
+
+        OBJECT      dot1qPortAcceptableFrameTypes
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1qPortIngressFiltering
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1qConstraintSetDefault
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1qConstraintTypeDefault
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+       ::= { qBridgeCompliances 1 }
+
+qBridgeCompliance2 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for device support of Virtual
+        LAN Bridge services.
+
+        This document clarifies the persistence requirements for
+        the read-write objects in this MIB module.  All
+        implementations claiming compliance to qBridgeCompliance2
+        MUST retain the values of those read-write objects that
+        specify this requirement."
+
+    MODULE
+        MANDATORY-GROUPS {
+            qBridgeBaseGroup,
+            qBridgeVlanGroup,
+            qBridgeVlanStaticGroup,
+            qBridgePortGroup2
+        }
+
+        GROUP       qBridgeFdbUnicastGroup
+        DESCRIPTION
+            "This group is mandatory for bridges that implement
+            802.1Q transparent bridging."
+
+        GROUP       qBridgeFdbMulticastGroup
+        DESCRIPTION
+            "This group is mandatory for bridges that implement
+            802.1Q transparent bridging."
+
+        GROUP       qBridgeServiceRequirementsGroup
+        DESCRIPTION
+            "This group is mandatory for bridges that implement
+            extended filtering services.  All objects must be
+            read-write if extended-filtering services are
+            enabled."
+
+        GROUP       qBridgeFdbStaticGroup
+        DESCRIPTION
+            "This group is optional."
+
+        GROUP       qBridgeVlanStatisticsGroup
+        DESCRIPTION
+            "This group is optional as there may be significant
+            implementation cost associated with its support."
+
+        GROUP       qBridgeVlanStatisticsOverflowGroup
+        DESCRIPTION
+            "This group is optional as there may be significant
+            implementation cost associated with its support.  It is most
+            relevant for high-capacity interfaces where the SNMP agent
+            supports only SNMPv1."
+
+        GROUP       qBridgeVlanHCStatisticsGroup
+        DESCRIPTION
+            "This group is optional as there may be significant
+            implementation cost associated with its support.  It is most
+            relevant for high-capacity interfaces."
+
+        GROUP       qBridgeLearningConstraintsGroup
+        DESCRIPTION
+            "This group is mandatory for devices implementing
+             both Independent VLAN Learning (IVL) and Shared
+             VLAN Learning (SVL) modes of operation of the
+             filtering database, as defined by IEEE 802.1Q."
+
+        GROUP       qBridgeLearningConstraintDefaultGroup
+        DESCRIPTION
+            "This group is mandatory for devices implementing
+             both Independent VLAN Learning (IVL) and Shared
+             VLAN Learning (SVL) modes of operation of the
+             filtering database, as defined by IEEE 802.1Q."
+
+        GROUP       qBridgeClassificationDeviceGroup
+        DESCRIPTION
+            "This group is mandatory ONLY for devices implementing
+             VLAN Classification as specified in IEEE 802.1v."
+
+        GROUP       qBridgeClassificationPortGroup
+        DESCRIPTION
+            "This group is mandatory ONLY for devices implementing
+             VLAN Classification as specified in IEEE 802.1v."
+
+        OBJECT      dot1qPortAcceptableFrameTypes
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1qPortIngressFiltering
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1qConstraintSetDefault
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1qConstraintTypeDefault
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1Q."
+
+        OBJECT      dot1vProtocolGroupId
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1v."
+
+        OBJECT      dot1vProtocolGroupRowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required as this is an optional
+            capability in IEEE 802.1v."
+        ::= { qBridgeCompliances 2 }
+
+END
diff --git a/snmp_builder/mibs/RADIUS-ACC-CLIENT-MIB.mib b/snmp_builder/mibs/RADIUS-ACC-CLIENT-MIB.mib
new file mode 100644
index 0000000..da70a82
--- /dev/null
+++ b/snmp_builder/mibs/RADIUS-ACC-CLIENT-MIB.mib
@@ -0,0 +1,638 @@
+RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+       Counter32, Integer32, Gauge32,
+       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
+       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+       InetAddressType, InetAddress,
+       InetPortNumber                   FROM INET-ADDRESS-MIB
+       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;
+
+radiusAccClientMIB MODULE-IDENTITY
+      LAST-UPDATED "200608210000Z" -- 21 August 2006
+      ORGANIZATION "IETF RADIUS Extensions Working Group."
+      CONTACT-INFO
+             " Bernard Aboba
+               Microsoft
+               One Microsoft Way
+
+               Redmond, WA  98052
+               US
+               Phone: +1 425 936 6605
+               EMail: bernarda@microsoft.com"
+      DESCRIPTION
+            "The MIB module for entities implementing the client
+             side of the Remote Authentication Dial-In User Service
+             (RADIUS) accounting protocol.  Copyright (C) The
+             Internet Society (2006).  This version of this MIB
+             module is part of RFC 4670; see the RFC itself for
+             full legal notices."
+      REVISION "200608210000Z"  -- 21 August 2006
+      DESCRIPTION
+            "Revised version as published in RFC 4670.
+             This version obsoletes that of RFC 2620 by
+             deprecating the MIB table containing IPv4-only
+             address formats and defining a new table to add support
+             for version-neutral IP address formats.  The remaining
+             MIB objects from RFC 2620 are carried forward into this
+             version."
+      REVISION "199906110000Z"  -- 11 Jun 1999
+      DESCRIPTION "Initial version as published in RFC 2620."
+      ::= { radiusAccounting 2 }
+
+radiusMIB OBJECT-IDENTITY
+      STATUS  current
+      DESCRIPTION
+             "The OID assigned to RADIUS MIB work by the IANA."
+      ::= { mib-2 67 }
+
+radiusAccounting  OBJECT IDENTIFIER ::= {radiusMIB 2}
+
+radiusAccClientMIBObjects     OBJECT IDENTIFIER
+      ::= { radiusAccClientMIB 1 }
+
+radiusAccClient  OBJECT IDENTIFIER
+      ::= { radiusAccClientMIBObjects 1 }
+
+radiusAccClientInvalidServerAddresses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Accounting-Response packets
+             received from unknown addresses."
+      ::= { radiusAccClient 1 }
+
+radiusAccClientIdentifier OBJECT-TYPE
+      SYNTAX SnmpAdminString
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The NAS-Identifier of the RADIUS accounting client.
+             This is not necessarily the same as sysName in MIB
+             II."
+      REFERENCE "RFC 2865 section 5.32"
+      ::= { radiusAccClient 2 }
+
+radiusAccServerTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF RadiusAccServerEntry
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+            "The (conceptual) table listing the RADIUS accounting
+             servers with which the client shares a secret."
+      ::= { radiusAccClient 3 }
+
+radiusAccServerEntry OBJECT-TYPE
+      SYNTAX     RadiusAccServerEntry
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+            "An entry (conceptual row) representing a RADIUS
+             accounting server with which the client shares a
+             secret."
+      INDEX      { radiusAccServerIndex }
+      ::= { radiusAccServerTable 1 }
+
+RadiusAccServerEntry ::= SEQUENCE {
+      radiusAccServerIndex                           Integer32,
+      radiusAccServerAddress                         IpAddress,
+      radiusAccClientServerPortNumber                Integer32,
+      radiusAccClientRoundTripTime                   TimeTicks,
+      radiusAccClientRequests                        Counter32,
+      radiusAccClientRetransmissions                 Counter32,
+      radiusAccClientResponses                       Counter32,
+      radiusAccClientMalformedResponses              Counter32,
+      radiusAccClientBadAuthenticators               Counter32,
+      radiusAccClientPendingRequests                   Gauge32,
+      radiusAccClientTimeouts                        Counter32,
+      radiusAccClientUnknownTypes                    Counter32,
+      radiusAccClientPacketsDropped                  Counter32
+}
+
+radiusAccServerIndex OBJECT-TYPE
+      SYNTAX     Integer32 (1..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+            "A number uniquely identifying each RADIUS
+             Accounting server with which this client
+             communicates."
+      ::= { radiusAccServerEntry 1 }
+
+radiusAccServerAddress OBJECT-TYPE
+      SYNTAX     IpAddress
+      MAX-ACCESS read-only
+      STATUS     deprecated
+      DESCRIPTION
+            "The IP address of the RADIUS accounting server
+             referred to in this table entry."
+      ::= { radiusAccServerEntry 2 }
+
+radiusAccClientServerPortNumber  OBJECT-TYPE
+      SYNTAX Integer32 (0..65535)
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The UDP port the client is using to send requests to
+             this server."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServerEntry 3 }
+
+radiusAccClientRoundTripTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+             "The time interval between the most recent
+             Accounting-Response and the Accounting-Request that
+             matched it from this RADIUS accounting server."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerEntry 4 }
+
+-- Request/Response statistics
+--
+-- Requests = Responses + PendingRequests + ClientTimeouts
+--
+-- Responses - MalformedResponses - BadAuthenticators -
+-- UnknownTypes - PacketsDropped = Successfully received
+
+radiusAccClientRequests OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             sent.  This does not include retransmissions."
+      REFERENCE "RFC 2866 section 4.1"
+      ::= { radiusAccServerEntry 5 }
+
+radiusAccClientRetransmissions OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             retransmitted to this RADIUS accounting server.
+             Retransmissions include retries where the
+             Identifier and Acct-Delay have been updated, as
+             well as those in which they remain the same."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerEntry 6 }
+
+radiusAccClientResponses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS packets received on the
+             accounting port from this server."
+      REFERENCE "RFC 2866 section 4.2"
+      ::= { radiusAccServerEntry 7 }
+
+radiusAccClientMalformedResponses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+             "The number of malformed RADIUS Accounting-Response
+              packets received from this server.  Malformed packets
+             include packets with an invalid length.  Bad
+             authenticators and unknown types are not included as
+             malformed accounting responses."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServerEntry 8 }
+
+radiusAccClientBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Accounting-Response
+             packets that contained invalid authenticators
+             received from this server."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServerEntry 9 }
+
+radiusAccClientPendingRequests OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             sent to this server that have not yet timed out or
+             received a response.  This variable is incremented
+             when an Accounting-Request is sent and decremented
+             due to receipt of an Accounting-Response, a timeout,
+             or a retransmission."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerEntry 10 }
+
+radiusAccClientTimeouts OBJECT-TYPE
+     SYNTAX Counter32
+     UNITS "timeouts"
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+          "The number of accounting timeouts to this server.
+           After a timeout, the client may retry to the same
+           server, send to a different server, or give up.
+           A retry to the same server is counted as a
+           retransmit as well as a timeout.  A send to a different
+           server is counted as an Accounting-Request as well as
+           a timeout."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerEntry  11 }
+
+radiusAccClientUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type that
+             were received from this server on the accounting port."
+      REFERENCE "RFC 2866 section 4"
+      ::= { radiusAccServerEntry  12 }
+
+radiusAccClientPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS packets that were received from
+             this server on the accounting port and dropped for some
+             other reason."
+      ::= { radiusAccServerEntry  13 }
+
+-- New MIB objects added in this revision
+
+radiusAccServerExtTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF RadiusAccServerExtEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "The (conceptual) table listing the RADIUS accounting
+             servers with which the client shares a secret."
+      ::= { radiusAccClient 4 }
+
+radiusAccServerExtEntry OBJECT-TYPE
+      SYNTAX     RadiusAccServerExtEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "An entry (conceptual row) representing a RADIUS
+             accounting server with which the client shares a
+             secret."
+      INDEX      { radiusAccServerExtIndex }
+      ::= { radiusAccServerExtTable 1 }
+
+RadiusAccServerExtEntry ::= SEQUENCE {
+      radiusAccServerExtIndex                    Integer32,
+      radiusAccServerInetAddressType             InetAddressType,
+      radiusAccServerInetAddress                 InetAddress,
+      radiusAccClientServerInetPortNumber        InetPortNumber,
+      radiusAccClientExtRoundTripTime            TimeTicks,
+      radiusAccClientExtRequests                 Counter32,
+      radiusAccClientExtRetransmissions          Counter32,
+      radiusAccClientExtResponses                Counter32,
+      radiusAccClientExtMalformedResponses       Counter32,
+      radiusAccClientExtBadAuthenticators        Counter32,
+      radiusAccClientExtPendingRequests          Gauge32,
+      radiusAccClientExtTimeouts                 Counter32,
+      radiusAccClientExtUnknownTypes             Counter32,
+      radiusAccClientExtPacketsDropped           Counter32,
+      radiusAccClientCounterDiscontinuity        TimeTicks
+}
+
+radiusAccServerExtIndex OBJECT-TYPE
+      SYNTAX     Integer32 (1..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "A number uniquely identifying each RADIUS
+             Accounting server with which this client
+             communicates."
+      ::= { radiusAccServerExtEntry 1 }
+
+radiusAccServerInetAddressType OBJECT-TYPE
+         SYNTAX     InetAddressType
+         MAX-ACCESS read-only
+         STATUS     current
+         DESCRIPTION
+               "The type of address format used for the
+                radiusAccServerInetAddress object."
+         ::= { radiusAccServerExtEntry 2 }
+
+   radiusAccServerInetAddress OBJECT-TYPE
+         SYNTAX     InetAddress
+         MAX-ACCESS read-only
+         STATUS     current
+         DESCRIPTION
+               "The IP address of the RADIUS accounting
+                server referred to in this table entry, using
+                the version-neutral IP address format."
+         ::= { radiusAccServerExtEntry 3 }
+
+   radiusAccClientServerInetPortNumber  OBJECT-TYPE
+         SYNTAX InetPortNumber ( 1..65535 )
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+               "The UDP port the client is using to send requests
+                to this accounting server.  The value zero (0) is
+                invalid."
+         REFERENCE "RFC 2866 section 3"
+         ::= { radiusAccServerExtEntry 4 }
+
+radiusAccClientExtRoundTripTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "The time interval between the most recent
+             Accounting-Response and the Accounting-Request that
+             matched it from this RADIUS accounting server."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerExtEntry 5 }
+
+-- Request/Response statistics
+--
+-- Requests = Responses + PendingRequests + ClientTimeouts
+--
+-- Responses - MalformedResponses - BadAuthenticators -
+-- UnknownTypes - PacketsDropped = Successfully received
+
+radiusAccClientExtRequests OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             sent.  This does not include retransmissions.
+             This counter may experience a discontinuity when the
+             RADIUS Accounting Client module within the managed
+             entity is reinitialized, as indicated by the current
+             value of radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 4.1"
+      ::= { radiusAccServerExtEntry 6 }
+
+radiusAccClientExtRetransmissions OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             retransmitted to this RADIUS accounting server.
+
+             Retransmissions include retries where the
+             Identifier and Acct-Delay have been updated, as
+             well as those in which they remain the same.
+             This counter may experience a discontinuity when the
+             RADIUS Accounting Client module within the managed
+             entity is reinitialized, as indicated by the current
+             value of radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerExtEntry 7 }
+
+radiusAccClientExtResponses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets received on the
+             accounting port from this server.  This counter
+             may experience a discontinuity when the RADIUS
+             Accounting Client module within the managed entity is
+             reinitialized, as indicated by the current value of
+             radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 4.2"
+      ::= { radiusAccServerExtEntry 8 }
+
+radiusAccClientExtMalformedResponses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of malformed RADIUS Accounting-Response
+             packets received from this server.  Malformed packets
+             include packets with an invalid length.  Bad
+             authenticators and unknown types are not included as
+             malformed accounting responses.  This counter may
+             experience a discontinuity when the RADIUS Accounting
+             Client module within the managed entity is
+             reinitialized, as indicated by the current
+             value of radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServerExtEntry 9 }
+
+radiusAccClientExtBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Accounting-Response
+             packets that contained invalid authenticators
+             received from this server.  This counter may
+             experience a discontinuity when the RADIUS
+             Accounting Client module within the managed
+             entity is reinitialized, as indicated by the
+             current value of
+             radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServerExtEntry 10 }
+
+radiusAccClientExtPendingRequests OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             sent to this server that have not yet timed out or
+             received a response.  This variable is incremented
+             when an Accounting-Request is sent and decremented
+             due to receipt of an Accounting-Response, a timeout,
+             or a retransmission.  This counter may experience a
+             discontinuity when the RADIUS Accounting Client module
+             within the managed entity is reinitialized, as
+             indicated by the current value of
+             radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerExtEntry 11 }
+
+radiusAccClientExtTimeouts OBJECT-TYPE
+     SYNTAX Counter32
+     UNITS "timeouts"
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+          "The number of accounting timeouts to this server.
+           After a timeout, the client may retry to the same
+           server, send to a different server, or give up.
+           A retry to the same server is counted as a
+           retransmit as well as a timeout.  A send to a different
+           server is counted as an Accounting-Request as well as
+           a timeout.  This counter may experience a discontinuity
+           when the RADIUS Accounting Client module within the
+           managed entity is reinitialized, as indicated by the
+           current value of radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 2"
+      ::= { radiusAccServerExtEntry  12 }
+
+radiusAccClientExtUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type that
+             were received from this server on the accounting port.
+             This counter may experience a discontinuity when the
+             RADIUS Accounting Client module within the managed
+             entity is reinitialized, as indicated by the current
+             value of radiusAccClientCounterDiscontinuity."
+      REFERENCE "RFC 2866 section 4"
+      ::= { radiusAccServerExtEntry  13 }
+
+radiusAccClientExtPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets that were received from
+             this server on the accounting port and dropped for some
+             other reason.  This counter may experience a
+             discontinuity when the RADIUS Accounting Client module
+             within the managed entity is reinitialized, as indicated
+             by the current value of
+             radiusAccClientCounterDiscontinuity."
+      ::= { radiusAccServerExtEntry  14 }
+
+radiusAccClientCounterDiscontinuity OBJECT-TYPE
+         SYNTAX TimeTicks
+         UNITS "centiseconds"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+               "The number of centiseconds since the last
+                discontinuity in the RADIUS Accounting Client
+                counters.  A discontinuity may be the result of a
+                reinitialization of the RADIUS Accounting Client
+                module within the managed entity."
+         ::= { radiusAccServerExtEntry 15 }
+
+-- conformance information
+
+radiusAccClientMIBConformance  OBJECT IDENTIFIER
+      ::= { radiusAccClientMIB 2 }
+
+radiusAccClientMIBCompliances  OBJECT IDENTIFIER
+      ::= { radiusAccClientMIBConformance 1 }
+
+radiusAccClientMIBGroups  OBJECT IDENTIFIER
+      ::= { radiusAccClientMIBConformance 2 }
+
+-- units of conformance
+
+radiusAccClientMIBCompliance MODULE-COMPLIANCE
+     STATUS  deprecated
+     DESCRIPTION
+           "The compliance statement for accounting clients
+            implementing the RADIUS Accounting Client MIB.
+            Implementation of this module is for IPv4-only
+            entities, or for backwards compatibility use with
+            entities that support both IPv4 and IPv6."
+     MODULE  -- this module
+         MANDATORY-GROUPS { radiusAccClientMIBGroup }
+     ::= { radiusAccClientMIBCompliances 1 }
+
+radiusAccClientExtMIBCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+           "The compliance statement for accounting
+            clients implementing the RADIUS Accounting
+            Client IPv6 Extensions MIB.  Implementation of
+            this module is for entities that support IPv6,
+            or support IPv4 and IPv6."
+     MODULE  -- this module
+         MANDATORY-GROUPS { radiusAccClientExtMIBGroup }
+
+     OBJECT radiusAccServerInetAddressType
+     SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+     DESCRIPTION
+           "An implementation is only required to support
+            IPv4 and globally unique IPv6 addresses."
+
+     OBJECT radiusAccServerInetAddress
+     SYNTAX InetAddress ( SIZE (4|16) )
+     DESCRIPTION
+           "An implementation is only required to support
+            IPv4 and globally unique IPv6 addresses."
+     ::= { radiusAccClientMIBCompliances 2 }
+
+-- units of conformance
+
+radiusAccClientMIBGroup OBJECT-GROUP
+     OBJECTS { radiusAccClientIdentifier,
+               radiusAccClientInvalidServerAddresses,
+               radiusAccServerAddress,
+               radiusAccClientServerPortNumber,
+               radiusAccClientRoundTripTime,
+               radiusAccClientRequests,
+               radiusAccClientRetransmissions,
+               radiusAccClientResponses,
+               radiusAccClientMalformedResponses,
+               radiusAccClientBadAuthenticators,
+               radiusAccClientPendingRequests,
+               radiusAccClientTimeouts,
+               radiusAccClientUnknownTypes,
+               radiusAccClientPacketsDropped
+         }
+     STATUS  deprecated
+     DESCRIPTION
+           "The basic collection of objects providing management of
+            RADIUS Accounting Clients."
+     ::= { radiusAccClientMIBGroups 1 }
+
+radiusAccClientExtMIBGroup OBJECT-GROUP
+     OBJECTS { radiusAccClientIdentifier,
+               radiusAccClientInvalidServerAddresses,
+               radiusAccServerInetAddressType,
+               radiusAccServerInetAddress,
+               radiusAccClientServerInetPortNumber,
+               radiusAccClientExtRoundTripTime,
+               radiusAccClientExtRequests,
+               radiusAccClientExtRetransmissions,
+               radiusAccClientExtResponses,
+               radiusAccClientExtMalformedResponses,
+               radiusAccClientExtBadAuthenticators,
+               radiusAccClientExtPendingRequests,
+               radiusAccClientExtTimeouts,
+               radiusAccClientExtUnknownTypes,
+               radiusAccClientExtPacketsDropped,
+               radiusAccClientCounterDiscontinuity
+
+         }
+     STATUS  current
+     DESCRIPTION
+           "The basic collection of objects providing management of
+            RADIUS Accounting Clients."
+     ::= { radiusAccClientMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/RADIUS-ACC-SERVER-MIB.mib b/snmp_builder/mibs/RADIUS-ACC-SERVER-MIB.mib
new file mode 100644
index 0000000..8859506
--- /dev/null
+++ b/snmp_builder/mibs/RADIUS-ACC-SERVER-MIB.mib
@@ -0,0 +1,727 @@
+RADIUS-ACC-SERVER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+       Counter32, Integer32,
+       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
+       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+       InetAddressType, InetAddress     FROM INET-ADDRESS-MIB
+       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;
+
+radiusAccServMIB MODULE-IDENTITY
+       LAST-UPDATED "200608210000Z"  -- 21 August 2006
+       ORGANIZATION "IETF RADIUS Extensions Working Group."
+       CONTACT-INFO
+              " Bernard Aboba
+                Microsoft
+                One Microsoft Way
+                Redmond, WA  98052
+                US
+
+                Phone: +1 425 936 6605
+                EMail: bernarda@microsoft.com"
+       DESCRIPTION
+             "The MIB module for entities implementing the server
+              side of the Remote Authentication Dial-In User
+              Service (RADIUS) accounting protocol.  Copyright (C)
+              The Internet Society (2006).  This version of this
+              MIB module is part of RFC 4671; see the RFC itself
+              for full legal notices."
+       REVISION "200608210000Z"  -- 21 August 2006
+       DESCRIPTION
+             "Revised version as published in RFC 4671.  This
+              version obsoletes that of RFC 2621 by deprecating
+              the MIB table containing IPv4-only address formats
+              and defining a new table to add support for version-
+              neutral IP address formats.  The remaining MIB objects
+              from RFC 2621 are carried forward into this version."
+       REVISION "199906110000Z"    -- 11 Jun 1999
+       DESCRIPTION "Initial version as published in RFC 2621."
+       ::= { radiusAccounting 1 }
+
+radiusMIB  OBJECT-IDENTITY
+       STATUS  current
+       DESCRIPTION
+             "The OID assigned to RADIUS MIB work by the IANA."
+       ::= { mib-2 67 }
+
+radiusAccounting  OBJECT IDENTIFIER ::= {radiusMIB 2}
+
+radiusAccServMIBObjects  OBJECT IDENTIFIER
+      ::= { radiusAccServMIB 1 }
+
+radiusAccServ  OBJECT IDENTIFIER
+      ::= { radiusAccServMIBObjects 1 }
+
+radiusAccServIdent OBJECT-TYPE
+       SYNTAX      SnmpAdminString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+             "The implementation identification string for the
+              RADIUS accounting server software in use on the
+              system, for example, 'FNS-2.1'."
+       ::= {radiusAccServ 1}
+
+radiusAccServUpTime OBJECT-TYPE
+       SYNTAX      TimeTicks
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+             "If the server has a persistent state (e.g., a
+              process), this value will be the time elapsed (in
+              hundredths of a second) since the server process was
+              started.  For software without persistent state, this
+              value will be zero."
+       ::= {radiusAccServ 2}
+
+radiusAccServResetTime OBJECT-TYPE
+       SYNTAX      TimeTicks
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+             "If the server has a persistent state (e.g., a process)
+              and supports a 'reset' operation (e.g., can be told to
+              re-read configuration files), this value will be the
+              time elapsed (in hundredths of a second) since the
+              server was 'reset.'  For software that does not
+              have persistence or does not support a 'reset'
+              operation, this value will be zero."
+       ::= {radiusAccServ 3}
+
+radiusAccServConfigReset OBJECT-TYPE
+       SYNTAX INTEGER { other(1),
+                        reset(2),
+                        initializing(3),
+                        running(4)}
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+              "Status/action object to reinitialize any persistent
+               server state.  When set to reset(2), any persistent
+               server state (such as a process) is reinitialized as
+               if the server had just been started.  This value will
+               never be returned by a read operation.  When read,
+               one of the following values will be returned:
+                   other(1) - server in some unknown state;
+                   initializing(3) - server (re)initializing;
+                   running(4) - server currently running."
+       ::= {radiusAccServ 4}
+
+radiusAccServTotalRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of packets received on the
+              accounting port."
+       REFERENCE "RFC 2866 section 4.1"
+       ::= { radiusAccServ 5 }
+
+radiusAccServTotalInvalidRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Accounting-Request packets
+              received from unknown addresses."
+       REFERENCE "RFC 2866 sections 2, 4.1"
+       ::= { radiusAccServ 6 }
+
+radiusAccServTotalDupRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of duplicate RADIUS Accounting-Request
+              packets received."
+       REFERENCE "RFC 2866 section 4.1"
+       ::= { radiusAccServ 7 }
+
+radiusAccServTotalResponses OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Accounting-Response packets
+              sent."
+       REFERENCE "RFC 2866 section 4.2"
+       ::= { radiusAccServ 8 }
+
+radiusAccServTotalMalformedRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of malformed RADIUS Accounting-Request
+              packets received.  Bad authenticators or unknown
+              types are not included as malformed Access-Requests."
+       REFERENCE "RFC 2866 section 3"
+       ::= { radiusAccServ 9 }
+
+radiusAccServTotalBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Accounting-Request packets
+             that contained an invalid authenticator."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServ 10 }
+
+radiusAccServTotalPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of incoming packets silently discarded
+             for a reason other than malformed, bad authenticators,
+             or unknown types."
+      REFERENCE "RFC 2866 section 3"
+      ::= { radiusAccServ 11 }
+
+radiusAccServTotalNoRecords OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Accounting-Request packets
+              that were received and responded to but not
+              recorded."
+       ::= { radiusAccServ 12 }
+
+radiusAccServTotalUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type that
+             were received."
+      REFERENCE "RFC 2866 section 4"
+      ::= { radiusAccServ 13 }
+
+radiusAccClientTable OBJECT-TYPE
+       SYNTAX     SEQUENCE OF RadiusAccClientEntry
+       MAX-ACCESS not-accessible
+       STATUS     deprecated
+       DESCRIPTION
+             "The (conceptual) table listing the RADIUS accounting
+              clients with which the server shares a secret."
+       ::= { radiusAccServ 14 }
+
+radiusAccClientEntry OBJECT-TYPE
+       SYNTAX     RadiusAccClientEntry
+       MAX-ACCESS not-accessible
+       STATUS     deprecated
+       DESCRIPTION
+             "An entry (conceptual row) representing a RADIUS
+              accounting client with which the server shares a
+              secret."
+       INDEX      { radiusAccClientIndex }
+       ::= { radiusAccClientTable 1 }
+
+RadiusAccClientEntry ::= SEQUENCE {
+       radiusAccClientIndex                           Integer32,
+       radiusAccClientAddress                         IpAddress,
+       radiusAccClientID                        SnmpAdminString,
+       radiusAccServPacketsDropped                    Counter32,
+       radiusAccServRequests                          Counter32,
+       radiusAccServDupRequests                       Counter32,
+       radiusAccServResponses                         Counter32,
+       radiusAccServBadAuthenticators                 Counter32,
+       radiusAccServMalformedRequests                 Counter32,
+       radiusAccServNoRecords                         Counter32,
+       radiusAccServUnknownTypes                      Counter32
+}
+
+radiusAccClientIndex OBJECT-TYPE
+       SYNTAX     Integer32 (1..2147483647)
+       MAX-ACCESS not-accessible
+       STATUS     deprecated
+       DESCRIPTION
+             "A number uniquely identifying each RADIUS accounting
+              client with which this server communicates."
+       ::= { radiusAccClientEntry 1 }
+
+radiusAccClientAddress OBJECT-TYPE
+       SYNTAX     IpAddress
+       MAX-ACCESS read-only
+       STATUS     deprecated
+       DESCRIPTION
+             "The NAS-IP-Address of the RADIUS accounting client
+
+              referred to in this table entry."
+       ::= { radiusAccClientEntry 2 }
+
+radiusAccClientID OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS read-only
+       STATUS     deprecated
+       DESCRIPTION
+             "The NAS-Identifier of the RADIUS accounting client
+              referred to in this table entry.  This is not
+              necessarily the same as sysName in MIB II."
+       REFERENCE "RFC 2865 section 5.32"
+       ::= { radiusAccClientEntry 3 }
+
+-- Server Counters
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes -  PacketsDropped - Responses = Pending
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes - PacketsDropped - NoRecords = entries logged
+
+radiusAccServPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+           "The number of incoming packets received
+            from this client and silently discarded
+            for a reason other than malformed, bad
+            authenticators, or unknown types."
+     REFERENCE "RFC 2866 section 3"
+     ::= { radiusAccClientEntry  4 }
+
+radiusAccServRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of packets received from this
+              client on the accounting port."
+       REFERENCE "RFC 2866 section 4.1"
+       ::= { radiusAccClientEntry  5 }
+
+radiusAccServDupRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of duplicate RADIUS Accounting-Request
+              packets received from this client."
+       REFERENCE "RFC 2866 section 4.1"
+       ::= { radiusAccClientEntry 6 }
+
+radiusAccServResponses OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS Accounting-Response packets
+              sent to this client."
+       REFERENCE "RFC 2866 section 4.2"
+       ::= { radiusAccClientEntry  7 }
+
+radiusAccServBadAuthenticators OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS Accounting-Request packets
+              that contained invalid authenticators received
+              from this client."
+       REFERENCE "RFC 2866 section 3"
+       ::= { radiusAccClientEntry  8 }
+
+radiusAccServMalformedRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of malformed RADIUS Accounting-Request
+              packets that were received from this client.
+              Bad authenticators and unknown types
+              are not included as malformed Accounting-Requests."
+       REFERENCE "RFC 2866 section 3"
+       ::= { radiusAccClientEntry  9 }
+
+radiusAccServNoRecords OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS Accounting-Request packets
+              that were received and responded to but not
+              recorded."
+       ::= { radiusAccClientEntry  10 }
+
+radiusAccServUnknownTypes OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS packets of unknown type that
+              were received from this client."
+       REFERENCE "RFC 2866 section 4"
+       ::= { radiusAccClientEntry  11 }
+
+-- New MIB objects added in this revision
+
+radiusAccClientExtTable OBJECT-TYPE
+       SYNTAX     SEQUENCE OF RadiusAccClientExtEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "The (conceptual) table listing the RADIUS accounting
+              clients with which the server shares a secret."
+       ::= { radiusAccServ 15 }
+
+radiusAccClientExtEntry OBJECT-TYPE
+       SYNTAX     RadiusAccClientExtEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "An entry (conceptual row) representing a RADIUS
+              accounting client with which the server shares a
+              secret."
+       INDEX      { radiusAccClientExtIndex }
+       ::= { radiusAccClientExtTable 1 }
+
+RadiusAccClientExtEntry ::= SEQUENCE {
+       radiusAccClientExtIndex               Integer32,
+       radiusAccClientInetAddressType        InetAddressType,
+       radiusAccClientInetAddress            InetAddress,
+       radiusAccClientExtID                  SnmpAdminString,
+       radiusAccServExtPacketsDropped        Counter32,
+       radiusAccServExtRequests              Counter32,
+       radiusAccServExtDupRequests           Counter32,
+       radiusAccServExtResponses             Counter32,
+       radiusAccServExtBadAuthenticators     Counter32,
+       radiusAccServExtMalformedRequests     Counter32,
+       radiusAccServExtNoRecords             Counter32,
+       radiusAccServExtUnknownTypes          Counter32,
+       radiusAccServerCounterDiscontinuity   TimeTicks
+}
+
+radiusAccClientExtIndex OBJECT-TYPE
+       SYNTAX     Integer32 (1..2147483647)
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "A number uniquely identifying each RADIUS accounting
+              client with which this server communicates."
+       ::= { radiusAccClientExtEntry 1 }
+
+       radiusAccClientInetAddressType OBJECT-TYPE
+         SYNTAX     InetAddressType
+         MAX-ACCESS read-only
+         STATUS     current
+         DESCRIPTION
+               "The type of address format used for the
+                radiusAccClientInetAddress object."
+         ::= { radiusAccClientExtEntry 2 }
+
+   radiusAccClientInetAddress OBJECT-TYPE
+         SYNTAX     InetAddress
+         MAX-ACCESS read-only
+         STATUS     current
+         DESCRIPTION
+               "The IP address of the RADIUS accounting
+                client referred to in this table entry, using
+                the IPv6 address format."
+         ::= { radiusAccClientExtEntry 3 }
+
+radiusAccClientExtID OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The NAS-Identifier of the RADIUS accounting client
+              referred to in this table entry.  This is not
+              necessarily the same as sysName in MIB II."
+       REFERENCE "RFC 2865 section 5.32"
+       ::= { radiusAccClientExtEntry 4 }
+
+-- Server Counters
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes -  PacketsDropped - Responses = Pending
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes - PacketsDropped - NoRecords = entries logged
+
+radiusAccServExtPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+           "The number of incoming packets received from this
+            client and silently discarded for a reason other
+            than malformed, bad authenticators, or unknown types.
+            This counter may experience a discontinuity when the
+            RADIUS Accounting Server module within the managed
+            entity is reinitialized, as indicated by the current
+            value of radiusAccServerCounterDiscontinuity."
+     REFERENCE "RFC 2866 section 3"
+     ::= { radiusAccClientExtEntry  5 }
+
+radiusAccServExtRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of packets received from this
+              client on the accounting port.  This counter
+              may experience a discontinuity when the
+              RADIUS Accounting Server module within the
+              managed entity is reinitialized, as indicated by
+              the current value of
+              radiusAccServerCounterDiscontinuity."
+       REFERENCE "RFC 2866 section 4.1"
+       ::= { radiusAccClientExtEntry  6 }
+
+radiusAccServExtDupRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of duplicate RADIUS Accounting-Request
+              packets received from this client.  This counter
+
+              may experience a discontinuity when the RADIUS
+              Accounting Server module within the managed
+              entity is reinitialized, as indicated by the
+              current value of
+              radiusAccServerCounterDiscontinuity."
+       REFERENCE "RFC 2866 section 4.1"
+       ::= { radiusAccClientExtEntry 7 }
+
+radiusAccServExtResponses OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Accounting-Response packets
+              sent to this client.  This counter may experience
+              a discontinuity when the RADIUS Accounting Server
+              module within the managed entity is reinitialized,
+              as indicated by the current value of
+              radiusAccServerCounterDiscontinuity."
+       REFERENCE "RFC 2866 section 4.2"
+       ::= { radiusAccClientExtEntry  8 }
+
+radiusAccServExtBadAuthenticators OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Accounting-Request packets
+              that contained invalid authenticators received
+              from this client.  This counter may experience a
+              discontinuity when the RADIUS Accounting Server
+              module within the managed entity is reinitialized,
+              as indicated by the current value of
+              radiusAccServerCounterDiscontinuity."
+       REFERENCE "RFC 2866 section 3"
+       ::= { radiusAccClientExtEntry  9 }
+
+radiusAccServExtMalformedRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of malformed RADIUS Accounting-Request
+              packets that were received from this client.
+              Bad authenticators and unknown types are not
+
+              included as malformed Accounting-Requests.  This
+              counter may experience a discontinuity when the
+              RADIUS Accounting Server module within the managed
+              entity is reinitialized, as indicated by the current
+              value of radiusAccServerCounterDiscontinuity."
+       REFERENCE "RFC 2866 section 3"
+       ::= { radiusAccClientExtEntry  10 }
+
+radiusAccServExtNoRecords OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Accounting-Request packets
+              that were received and responded to but not
+              recorded.  This counter may experience a
+              discontinuity when the RADIUS Accounting Server
+              module within the managed entity is reinitialized,
+              as indicated by the current value of
+              radiusAccServerCounterDiscontinuity."
+       ::= { radiusAccClientExtEntry  11 }
+
+radiusAccServExtUnknownTypes OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS packets of unknown type that
+              were received from this client.  This counter may
+              experience a discontinuity when the RADIUS Accounting
+              Server module within the managed entity is
+              reinitialized, as indicated by the current value of
+              radiusAccServerCounterDiscontinuity."
+       REFERENCE "RFC 2866 section 4"
+       ::= { radiusAccClientExtEntry  12 }
+
+radiusAccServerCounterDiscontinuity OBJECT-TYPE
+         SYNTAX TimeTicks
+         UNITS "centiseconds"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+               "The number of centiseconds since the last
+                discontinuity in the RADIUS Accounting Server
+                counters.  A discontinuity may be the result of
+                a reinitialization of the RADIUS Accounting Server
+
+                module within the managed entity."
+         ::= { radiusAccClientExtEntry 13 }
+
+-- conformance information
+
+radiusAccServMIBConformance  OBJECT IDENTIFIER
+       ::= { radiusAccServMIB 2 }
+
+radiusAccServMIBCompliances  OBJECT IDENTIFIER
+       ::= { radiusAccServMIBConformance 1 }
+
+radiusAccServMIBGroups  OBJECT IDENTIFIER
+       ::= { radiusAccServMIBConformance 2 }
+
+-- compliance statements
+
+radiusAccServMIBCompliance MODULE-COMPLIANCE
+       STATUS  deprecated
+       DESCRIPTION
+            "The compliance statement for accounting servers
+            implementing the RADIUS Accounting Server MIB.
+            Implementation of this module is for IPv4-only
+            entities, or for backwards compatibility use with
+            entities that support both IPv4 and IPv6."
+       MODULE  -- this module
+       MANDATORY-GROUPS { radiusAccServMIBGroup }
+
+       OBJECT        radiusAccServConfigReset
+       WRITE-SYNTAX  INTEGER { reset(2) }
+       DESCRIPTION  "The only SETable value is 'reset' (2)."
+       ::= { radiusAccServMIBCompliances 1 }
+
+radiusAccServExtMIBCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+            "The compliance statement for accounting
+            servers implementing the RADIUS Accounting
+            Server IPv6 Extensions MIB.  Implementation of
+            this module is for entities that support IPv6,
+            or support IPv4 and IPv6."
+       MODULE  -- this module
+       MANDATORY-GROUPS { radiusAccServExtMIBGroup }
+
+       OBJECT        radiusAccServConfigReset
+       WRITE-SYNTAX  INTEGER { reset(2) }
+       DESCRIPTION  "The only SETable value is 'reset' (2)."
+
+       OBJECT radiusAccClientInetAddressType
+        SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+        DESCRIPTION
+              "An implementation is only required to support
+               IPv4 and globally unique IPv6 addresses."
+
+        OBJECT radiusAccClientInetAddress
+        SYNTAX InetAddress ( SIZE (4|16) )
+        DESCRIPTION
+              "An implementation is only required to support
+               IPv4 and globally unique IPv6 addresses."
+       ::= { radiusAccServMIBCompliances 2 }
+
+-- units of conformance
+
+radiusAccServMIBGroup OBJECT-GROUP
+      OBJECTS {radiusAccServIdent,
+               radiusAccServUpTime,
+               radiusAccServResetTime,
+               radiusAccServConfigReset,
+               radiusAccServTotalRequests,
+               radiusAccServTotalInvalidRequests,
+               radiusAccServTotalDupRequests,
+               radiusAccServTotalResponses,
+               radiusAccServTotalMalformedRequests,
+               radiusAccServTotalBadAuthenticators,
+               radiusAccServTotalPacketsDropped,
+               radiusAccServTotalNoRecords,
+               radiusAccServTotalUnknownTypes,
+               radiusAccClientAddress,
+               radiusAccClientID,
+               radiusAccServPacketsDropped,
+               radiusAccServRequests,
+               radiusAccServDupRequests,
+               radiusAccServResponses,
+               radiusAccServBadAuthenticators,
+               radiusAccServMalformedRequests,
+               radiusAccServNoRecords,
+               radiusAccServUnknownTypes
+              }
+      STATUS  deprecated
+      DESCRIPTION
+            "The collection of objects providing management of
+             a RADIUS Accounting Server."
+      ::= { radiusAccServMIBGroups 1 }
+
+radiusAccServExtMIBGroup OBJECT-GROUP
+      OBJECTS {radiusAccServIdent,
+               radiusAccServUpTime,
+               radiusAccServResetTime,
+               radiusAccServConfigReset,
+               radiusAccServTotalRequests,
+               radiusAccServTotalInvalidRequests,
+               radiusAccServTotalDupRequests,
+               radiusAccServTotalResponses,
+               radiusAccServTotalMalformedRequests,
+               radiusAccServTotalBadAuthenticators,
+               radiusAccServTotalPacketsDropped,
+               radiusAccServTotalNoRecords,
+               radiusAccServTotalUnknownTypes,
+               radiusAccClientInetAddressType,
+               radiusAccClientInetAddress,
+               radiusAccClientExtID,
+               radiusAccServExtPacketsDropped,
+               radiusAccServExtRequests,
+               radiusAccServExtDupRequests,
+               radiusAccServExtResponses,
+               radiusAccServExtBadAuthenticators,
+               radiusAccServExtMalformedRequests,
+               radiusAccServExtNoRecords,
+               radiusAccServExtUnknownTypes,
+               radiusAccServerCounterDiscontinuity
+              }
+      STATUS  current
+      DESCRIPTION
+            "The collection of objects providing management of
+             a RADIUS Accounting Server."
+      ::= { radiusAccServMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/RADIUS-AUTH-CLIENT-MIB.mib b/snmp_builder/mibs/RADIUS-AUTH-CLIENT-MIB.mib
new file mode 100644
index 0000000..4e58255
--- /dev/null
+++ b/snmp_builder/mibs/RADIUS-AUTH-CLIENT-MIB.mib
@@ -0,0 +1,710 @@
+RADIUS-AUTH-CLIENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+       Counter32, Integer32, Gauge32,
+       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
+       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+       InetAddressType, InetAddress,
+       InetPortNumber                   FROM INET-ADDRESS-MIB
+       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;
+
+radiusAuthClientMIB MODULE-IDENTITY
+       LAST-UPDATED "200608210000Z" -- 21 August 2006
+       ORGANIZATION "IETF RADIUS Extensions Working Group."
+       CONTACT-INFO
+              " Bernard Aboba
+                Microsoft
+                One Microsoft Way
+                Redmond, WA  98052
+
+                US
+                Phone: +1 425 936 6605
+                EMail: bernarda@microsoft.com"
+       DESCRIPTION
+             "The MIB module for entities implementing the client
+              side of the Remote Authentication Dial-In User Service
+              (RADIUS) authentication protocol.  Copyright (C) The
+              Internet Society (2006).  This version of this MIB
+              module is part of RFC 4668; see the RFC itself for
+              full legal notices."
+       REVISION "200608210000Z"  --  21 August 2006
+       DESCRIPTION
+              "Revised version as published in RFC 4668.  This
+               version obsoletes that of RFC 2618 by deprecating
+               the MIB table containing IPv4-only address formats
+               and defining a new table to add support for version
+               neutral IP address formats.  The remaining MIB objects
+               from RFC 2618 are carried forward into this version."
+       REVISION "199906110000Z"    -- 11 Jun 1999
+       DESCRIPTION "Initial version as published in RFC 2618."
+       ::= { radiusAuthentication 2 }
+
+radiusMIB OBJECT-IDENTITY
+       STATUS  current
+       DESCRIPTION
+             "The OID assigned to RADIUS MIB work by the IANA."
+        ::= { mib-2 67 }
+
+radiusAuthentication  OBJECT IDENTIFIER ::= {radiusMIB 1}
+
+radiusAuthClientMIBObjects  OBJECT IDENTIFIER
+        ::= { radiusAuthClientMIB 1 }
+
+radiusAuthClient  OBJECT IDENTIFIER
+        ::= { radiusAuthClientMIBObjects 1 }
+
+radiusAuthClientInvalidServerAddresses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Response packets
+             received from unknown addresses."
+      ::= { radiusAuthClient 1 }
+
+radiusAuthClientIdentifier OBJECT-TYPE
+      SYNTAX SnmpAdminString
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "The NAS-Identifier of the RADIUS authentication client.
+              This is not necessarily the same as sysName in MIB II."
+      REFERENCE "RFC 2865 section 5.32"
+      ::= { radiusAuthClient 2 }
+
+radiusAuthServerTable OBJECT-TYPE
+      SYNTAX     SEQUENCE OF RadiusAuthServerEntry
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+            "The (conceptual) table listing the RADIUS authentication
+             servers with which the client shares a secret."
+      ::= { radiusAuthClient 3 }
+
+radiusAuthServerEntry OBJECT-TYPE
+      SYNTAX     RadiusAuthServerEntry
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+            "An entry (conceptual row) representing a RADIUS
+             authentication server with which the client shares
+             a secret."
+      INDEX      { radiusAuthServerIndex }
+      ::= { radiusAuthServerTable 1 }
+
+RadiusAuthServerEntry ::= SEQUENCE {
+      radiusAuthServerIndex                           Integer32,
+      radiusAuthServerAddress                         IpAddress,
+      radiusAuthClientServerPortNumber                Integer32,
+      radiusAuthClientRoundTripTime                   TimeTicks,
+      radiusAuthClientAccessRequests                  Counter32,
+      radiusAuthClientAccessRetransmissions           Counter32,
+      radiusAuthClientAccessAccepts                   Counter32,
+      radiusAuthClientAccessRejects                   Counter32,
+      radiusAuthClientAccessChallenges                Counter32,
+      radiusAuthClientMalformedAccessResponses        Counter32,
+      radiusAuthClientBadAuthenticators               Counter32,
+      radiusAuthClientPendingRequests                   Gauge32,
+      radiusAuthClientTimeouts                        Counter32,
+      radiusAuthClientUnknownTypes                    Counter32,
+      radiusAuthClientPacketsDropped                  Counter32
+}
+
+radiusAuthServerIndex OBJECT-TYPE
+      SYNTAX     Integer32 (1..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+             "A number uniquely identifying each RADIUS
+             Authentication server with which this client
+             communicates."
+      ::= { radiusAuthServerEntry 1 }
+
+radiusAuthServerAddress OBJECT-TYPE
+      SYNTAX     IpAddress
+      MAX-ACCESS read-only
+      STATUS     deprecated
+      DESCRIPTION
+            "The IP address of the RADIUS authentication server
+             referred to in this table entry."
+      ::= { radiusAuthServerEntry 2 }
+
+radiusAuthClientServerPortNumber  OBJECT-TYPE
+      SYNTAX Integer32 (0..65535)
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The UDP port the client is using to send requests to
+             this server."
+      REFERENCE "RFC 2865 section 3"
+      ::= { radiusAuthServerEntry 3 }
+
+radiusAuthClientRoundTripTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The time interval (in hundredths of a second) between
+             the most recent Access-Reply/Access-Challenge and the
+             Access-Request that matched it from this RADIUS
+             authentication server."
+      ::= { radiusAuthServerEntry 4 }
+
+-- Request/Response statistics
+--
+-- TotalIncomingPackets = Accepts + Rejects + Challenges +
+-- UnknownTypes
+--
+-- TotalIncomingPackets - MalformedResponses -
+-- BadAuthenticators - UnknownTypes - PacketsDropped =
+-- Successfully received
+--
+-- AccessRequests + PendingRequests + ClientTimeouts =
+
+-- Successfully received
+--
+--
+
+radiusAuthClientAccessRequests OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets sent
+             to this server.  This does not include retransmissions."
+      REFERENCE "RFC 2865 section 4.1"
+      ::= { radiusAuthServerEntry 5 }
+
+radiusAuthClientAccessRetransmissions OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets
+             retransmitted to this RADIUS authentication server."
+      REFERENCE "RFC 2865 sections 2.5, 4.1"
+      ::= { radiusAuthServerEntry 6 }
+
+radiusAuthClientAccessAccepts OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Accept packets
+             (valid or invalid) received from this server."
+      REFERENCE "RFC 2865 section 4.2"
+      ::= { radiusAuthServerEntry 7 }
+
+radiusAuthClientAccessRejects OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Reject packets
+             (valid or invalid) received from this server."
+      REFERENCE "RFC 2865 section 4.3"
+      ::= { radiusAuthServerEntry  8 }
+
+radiusAuthClientAccessChallenges OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Challenge packets
+             (valid or invalid) received from this server."
+      REFERENCE "RFC 2865 section 4.4"
+      ::= { radiusAuthServerEntry 9 }
+
+-- "Access-Response" includes an Access-Accept, Access-Challenge
+-- or Access-Reject
+
+radiusAuthClientMalformedAccessResponses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of malformed RADIUS Access-Response
+             packets received from this server.
+             Malformed packets include packets with
+             an invalid length.  Bad authenticators or
+             Message Authenticator attributes or unknown types
+             are not included as malformed access responses."
+      ::= { radiusAuthServerEntry 10 }
+
+radiusAuthClientBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Response packets
+             containing invalid authenticators or Message
+             Authenticator attributes received from this server."
+      REFERENCE "RFC 2865 section 3, RFC 2869 section 5.14"
+      ::= { radiusAuthServerEntry 11 }
+
+radiusAuthClientPendingRequests OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets
+             destined for this server that have not yet timed out
+             or received a response.  This variable is incremented
+
+             when an Access-Request is sent and decremented due to
+             receipt of an Access-Accept, Access-Reject,
+             Access-Challenge, timeout, or retransmission."
+      REFERENCE "RFC 2865 section 2"
+      ::= { radiusAuthServerEntry 12 }
+
+radiusAuthClientTimeouts OBJECT-TYPE
+     SYNTAX Counter32
+     UNITS "timeouts"
+     MAX-ACCESS read-only
+     STATUS deprecated
+     DESCRIPTION
+            "The number of authentication timeouts to this server.
+             After a timeout, the client may retry to the same
+             server, send to a different server, or
+             give up.  A retry to the same server is counted as a
+             retransmit as well as a timeout.  A send to a different
+             server is counted as a Request as well as a timeout."
+             REFERENCE "RFC 2865 section 2, RFC 2869 section 2.3.2"
+      ::= { radiusAuthServerEntry  13 }
+
+radiusAuthClientUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type that
+             were received from this server on the authentication
+             port."
+      ::= { radiusAuthServerEntry  14 }
+
+radiusAuthClientPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+            "The number of RADIUS packets that were
+             received from this server on the authentication port
+             and dropped for some other reason."
+      ::= { radiusAuthServerEntry  15 }
+
+-- New MIB Objects in this revision
+
+radiusAuthServerExtTable OBJECT-TYPE
+      SYNTAX     SEQUENCE OF RadiusAuthServerExtEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "The (conceptual) table listing the RADIUS authentication
+             servers with which the client shares a secret."
+      ::= { radiusAuthClient 4 }
+
+radiusAuthServerExtEntry OBJECT-TYPE
+      SYNTAX     RadiusAuthServerExtEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "An entry (conceptual row) representing a RADIUS
+             authentication server with which the client shares
+             a secret."
+      INDEX      { radiusAuthServerExtIndex }
+      ::= { radiusAuthServerExtTable 1 }
+
+RadiusAuthServerExtEntry ::= SEQUENCE {
+      radiusAuthServerExtIndex                     Integer32,
+      radiusAuthServerInetAddressType              InetAddressType,
+      radiusAuthServerInetAddress                  InetAddress,
+      radiusAuthClientServerInetPortNumber         InetPortNumber,
+      radiusAuthClientExtRoundTripTime             TimeTicks,
+      radiusAuthClientExtAccessRequests            Counter32,
+      radiusAuthClientExtAccessRetransmissions     Counter32,
+      radiusAuthClientExtAccessAccepts             Counter32,
+      radiusAuthClientExtAccessRejects             Counter32,
+      radiusAuthClientExtAccessChallenges          Counter32,
+      radiusAuthClientExtMalformedAccessResponses  Counter32,
+      radiusAuthClientExtBadAuthenticators         Counter32,
+      radiusAuthClientExtPendingRequests           Gauge32,
+      radiusAuthClientExtTimeouts                  Counter32,
+      radiusAuthClientExtUnknownTypes              Counter32,
+      radiusAuthClientExtPacketsDropped            Counter32,
+      radiusAuthClientCounterDiscontinuity         TimeTicks
+}
+
+radiusAuthServerExtIndex OBJECT-TYPE
+      SYNTAX     Integer32 (1..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+             "A number uniquely identifying each RADIUS
+             Authentication server with which this client
+             communicates."
+      ::= { radiusAuthServerExtEntry 1 }
+
+radiusAuthServerInetAddressType OBJECT-TYPE
+      SYNTAX     InetAddressType
+      MAX-ACCESS read-only
+      STATUS     current
+      DESCRIPTION
+            "The type of address format used for the
+             radiusAuthServerInetAddress object."
+      ::= { radiusAuthServerExtEntry 2 }
+
+radiusAuthServerInetAddress OBJECT-TYPE
+      SYNTAX     InetAddress
+      MAX-ACCESS read-only
+      STATUS     current
+      DESCRIPTION
+            "The IP address of the RADIUS authentication
+             server referred to in this table entry, using
+             the version-neutral IP address format."
+      ::= { radiusAuthServerExtEntry 3 }
+
+radiusAuthClientServerInetPortNumber  OBJECT-TYPE
+      SYNTAX InetPortNumber ( 1..65535 )
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The UDP port the client is using to send requests
+             to this server.  The value of zero (0) is invalid."
+      REFERENCE "RFC 2865 section 3"
+      ::= { radiusAuthServerExtEntry 4 }
+
+radiusAuthClientExtRoundTripTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The time interval (in hundredths of a second) between
+             the most recent Access-Reply/Access-Challenge and the
+             Access-Request that matched it from this RADIUS
+             authentication server."
+      REFERENCE "RFC 2865 section 2"
+      ::= { radiusAuthServerExtEntry 5 }
+
+-- Request/Response statistics
+--
+-- TotalIncomingPackets = Accepts + Rejects + Challenges +
+-- UnknownTypes
+--
+-- TotalIncomingPackets - MalformedResponses -
+-- BadAuthenticators - UnknownTypes - PacketsDropped =
+
+-- Successfully received
+--
+-- AccessRequests + PendingRequests + ClientTimeouts =
+-- Successfully received
+--
+--
+
+radiusAuthClientExtAccessRequests OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets sent
+             to this server.  This does not include retransmissions.
+             This counter may experience a discontinuity when the
+             RADIUS Client module within the managed entity is
+             reinitialized, as indicated by the current value of
+             radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 section 4.1"
+      ::= { radiusAuthServerExtEntry 6 }
+
+radiusAuthClientExtAccessRetransmissions OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets
+             retransmitted to this RADIUS authentication server.
+             This counter may experience a discontinuity when
+             the RADIUS Client module within the managed entity
+             is reinitialized, as indicated by the current value
+             of radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 sections 2.5, 4.1"
+      ::= { radiusAuthServerExtEntry 7 }
+
+radiusAuthClientExtAccessAccepts OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Accept packets
+             (valid or invalid) received from this server.
+             This counter may experience a discontinuity when
+             the RADIUS Client module within the managed entity
+             is reinitialized, as indicated by the current value
+
+             of radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 section 4.2"
+      ::= { radiusAuthServerExtEntry 8 }
+
+radiusAuthClientExtAccessRejects OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Reject packets
+             (valid or invalid) received from this server.
+             This counter may experience a discontinuity when
+             the RADIUS Client module within the managed
+             entity is reinitialized, as indicated by the
+             current value of
+             radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 section 4.3"
+      ::= { radiusAuthServerExtEntry  9 }
+
+radiusAuthClientExtAccessChallenges OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Challenge packets
+             (valid or invalid) received from this server.
+             This counter may experience a discontinuity when
+             the RADIUS Client module within the managed
+             entity is reinitialized, as indicated by the
+             current value of
+             radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 section 4.4"
+      ::= { radiusAuthServerExtEntry 10 }
+
+-- "Access-Response" includes an Access-Accept, Access-Challenge,
+-- or Access-Reject
+
+radiusAuthClientExtMalformedAccessResponses OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of malformed RADIUS Access-Response
+             packets received from this server.
+             Malformed packets include packets with
+
+             an invalid length.  Bad authenticators or
+             Message Authenticator attributes or unknown types
+             are not included as malformed access responses.
+             This counter may experience a discontinuity when
+             the RADIUS Client module within the managed entity
+             is reinitialized, as indicated by the current value
+             of radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 sections 3, 4"
+      ::= { radiusAuthServerExtEntry 11 }
+
+radiusAuthClientExtBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Response packets
+             containing invalid authenticators or Message
+             Authenticator attributes received from this server.
+             This counter may experience a discontinuity when
+             the RADIUS Client module within the managed entity
+             is reinitialized, as indicated by the current value
+             of radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 section 3"
+      ::= { radiusAuthServerExtEntry 12 }
+
+radiusAuthClientExtPendingRequests OBJECT-TYPE
+      SYNTAX Gauge32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets
+             destined for this server that have not yet timed out
+             or received a response.  This variable is incremented
+             when an Access-Request is sent and decremented due to
+             receipt of an Access-Accept, Access-Reject,
+             Access-Challenge, timeout, or retransmission."
+      REFERENCE "RFC 2865 section 2"
+      ::= { radiusAuthServerExtEntry 13 }
+
+radiusAuthClientExtTimeouts OBJECT-TYPE
+     SYNTAX Counter32
+     UNITS "timeouts"
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of authentication timeouts to this server.
+
+             After a timeout, the client may retry to the same
+             server, send to a different server, or
+             give up.  A retry to the same server is counted as a
+             retransmit as well as a timeout.  A send to a different
+             server is counted as a Request as well as a timeout.
+             This counter may experience a discontinuity when the
+             RADIUS Client module within the managed entity is
+             reinitialized, as indicated by the current value of
+             radiusAuthClientCounterDiscontinuity."
+      REFERENCE "RFC 2865 sections 2.5, 4.1"
+      ::= { radiusAuthServerExtEntry  14 }
+
+radiusAuthClientExtUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type that
+             were received from this server on the authentication
+             port.  This counter may experience a discontinuity
+             when the RADIUS Client module within the managed
+             entity is reinitialized, as indicated by the current
+             value of radiusAuthClientCounterDiscontinuity."
+             REFERENCE "RFC 2865 section 4"
+      ::= { radiusAuthServerExtEntry  15 }
+
+radiusAuthClientExtPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets that were
+             received from this server on the authentication port
+             and dropped for some other reason.  This counter may
+             experience a discontinuity when the RADIUS Client
+             module within the managed entity is reinitialized,
+             as indicated by the current value of
+             radiusAuthClientCounterDiscontinuity."
+      ::= { radiusAuthServerExtEntry  16 }
+
+radiusAuthClientCounterDiscontinuity OBJECT-TYPE
+      SYNTAX TimeTicks
+      UNITS "centiseconds"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of centiseconds since the last discontinuity
+             in the RADIUS Client counters.  A discontinuity may
+             be the result of a reinitialization of the RADIUS
+             Client module within the managed entity."
+      ::= { radiusAuthServerExtEntry 17 }
+
+-- conformance information
+
+radiusAuthClientMIBConformance OBJECT IDENTIFIER
+        ::= { radiusAuthClientMIB 2 }
+
+radiusAuthClientMIBCompliances OBJECT IDENTIFIER
+        ::= { radiusAuthClientMIBConformance 1 }
+
+radiusAuthClientMIBGroups OBJECT IDENTIFIER
+        ::= { radiusAuthClientMIBConformance 2 }
+
+-- compliance statements
+
+radiusAuthClientMIBCompliance MODULE-COMPLIANCE
+     STATUS  deprecated
+     DESCRIPTION
+           "The compliance statement for authentication clients
+            implementing the RADIUS Authentication Client MIB.
+            Implementation of this module is for IPv4-only
+            entities, or for backwards compatibility use with
+            entities that support both IPv4 and IPv6."
+     MODULE  -- this module
+            MANDATORY-GROUPS { radiusAuthClientMIBGroup }
+     ::= { radiusAuthClientMIBCompliances 1 }
+
+radiusAuthClientExtMIBCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+           "The compliance statement for authentication
+            clients implementing the RADIUS Authentication
+            Client IPv6 Extensions MIB.  Implementation of
+            this module is for entities that support IPv6,
+            or support IPv4 and IPv6."
+     MODULE  -- this module
+            MANDATORY-GROUPS { radiusAuthClientExtMIBGroup }
+
+     OBJECT radiusAuthServerInetAddressType
+     SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+     DESCRIPTION
+           "An implementation is only required to support
+            IPv4 and globally unique IPv6 addresses."
+
+     OBJECT radiusAuthServerInetAddress
+     SYNTAX InetAddress ( SIZE (4|16) )
+     DESCRIPTION
+           "An implementation is only required to support
+            IPv4 and globally unique IPv6 addresses."
+     ::= { radiusAuthClientMIBCompliances 2 }
+
+-- units of conformance
+
+radiusAuthClientMIBGroup OBJECT-GROUP
+     OBJECTS { radiusAuthClientIdentifier,
+               radiusAuthClientInvalidServerAddresses,
+               radiusAuthServerAddress,
+               radiusAuthClientServerPortNumber,
+               radiusAuthClientRoundTripTime,
+               radiusAuthClientAccessRequests,
+               radiusAuthClientAccessRetransmissions,
+               radiusAuthClientAccessAccepts,
+               radiusAuthClientAccessRejects,
+               radiusAuthClientAccessChallenges,
+               radiusAuthClientMalformedAccessResponses,
+               radiusAuthClientBadAuthenticators,
+               radiusAuthClientPendingRequests,
+               radiusAuthClientTimeouts,
+               radiusAuthClientUnknownTypes,
+               radiusAuthClientPacketsDropped
+            }
+     STATUS  deprecated
+     DESCRIPTION
+           "The basic collection of objects providing management of
+            RADIUS Authentication Clients."
+     ::= { radiusAuthClientMIBGroups 1 }
+
+radiusAuthClientExtMIBGroup OBJECT-GROUP
+     OBJECTS { radiusAuthClientIdentifier,
+               radiusAuthClientInvalidServerAddresses,
+               radiusAuthServerInetAddressType,
+               radiusAuthServerInetAddress,
+               radiusAuthClientServerInetPortNumber,
+               radiusAuthClientExtRoundTripTime,
+               radiusAuthClientExtAccessRequests,
+               radiusAuthClientExtAccessRetransmissions,
+               radiusAuthClientExtAccessAccepts,
+               radiusAuthClientExtAccessRejects,
+               radiusAuthClientExtAccessChallenges,
+               radiusAuthClientExtMalformedAccessResponses,
+               radiusAuthClientExtBadAuthenticators,
+               radiusAuthClientExtPendingRequests,
+               radiusAuthClientExtTimeouts,
+               radiusAuthClientExtUnknownTypes,
+               radiusAuthClientExtPacketsDropped,
+               radiusAuthClientCounterDiscontinuity
+            }
+     STATUS  current
+     DESCRIPTION
+           "The collection of extended objects providing
+            management of RADIUS Authentication Clients
+            using version-neutral IP address format."
+     ::= { radiusAuthClientMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/RADIUS-AUTH-SERVER-MIB.mib b/snmp_builder/mibs/RADIUS-AUTH-SERVER-MIB.mib
new file mode 100644
index 0000000..4edcef8
--- /dev/null
+++ b/snmp_builder/mibs/RADIUS-AUTH-SERVER-MIB.mib
@@ -0,0 +1,774 @@
+RADIUS-AUTH-SERVER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+       Counter32, Integer32,
+       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
+       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+       InetAddressType, InetAddress     FROM INET-ADDRESS-MIB
+       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;
+
+radiusAuthServMIB MODULE-IDENTITY
+       LAST-UPDATED "200608210000Z"  -- 21 August 2006
+       ORGANIZATION "IETF RADIUS Extensions Working Group."
+       CONTACT-INFO
+              " Bernard Aboba
+                Microsoft
+                One Microsoft Way
+                Redmond, WA  98052
+                US
+                Phone: +1 425 936 6605
+
+                EMail: bernarda@microsoft.com"
+       DESCRIPTION
+             "The MIB module for entities implementing the server
+              side of the Remote Authentication Dial-In User
+              Service (RADIUS) authentication protocol.  Copyright
+              (C) The Internet Society (2006).  This version of this
+              MIB module is part of RFC 4669; see the RFC itself for
+              full legal notices."
+       REVISION "200608210000Z"  -- 21 August 2006
+       DESCRIPTION
+             "Revised version as published in RFC 4669.  This
+              version obsoletes that of RFC 2619 by deprecating the
+              MIB table containing IPv4-only address formats and
+              defining a new table to add support for version-neutral
+              IP address formats.  The remaining MIB objects from RFC
+              2619 are carried forward into this version."
+       REVISION "199906110000Z"  -- 11 Jun 1999
+       DESCRIPTION "Initial version as published in RFC 2619."
+       ::= { radiusAuthentication 1 }
+
+radiusMIB  OBJECT-IDENTITY
+       STATUS  current
+       DESCRIPTION
+             "The OID assigned to RADIUS MIB work by the IANA."
+        ::= { mib-2 67 }
+
+radiusAuthentication  OBJECT IDENTIFIER ::= {radiusMIB 1}
+
+radiusAuthServMIBObjects OBJECT IDENTIFIER
+        ::= { radiusAuthServMIB 1 }
+
+radiusAuthServ  OBJECT IDENTIFIER
+        ::= { radiusAuthServMIBObjects 1 }
+
+radiusAuthServIdent OBJECT-TYPE
+       SYNTAX      SnmpAdminString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+             "The implementation identification string for the
+              RADIUS authentication server software in use on the
+              system, for example, 'FNS-2.1'."
+       ::= {radiusAuthServ 1}
+
+radiusAuthServUpTime OBJECT-TYPE
+       SYNTAX      TimeTicks
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+             "If the server has a persistent state (e.g., a
+              process), this value will be the time elapsed (in
+              hundredths of a second) since the server process
+              was started.  For software without persistent state,
+              this value will be zero."
+       ::= {radiusAuthServ 2}
+
+radiusAuthServResetTime OBJECT-TYPE
+       SYNTAX      TimeTicks
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+             "If the server has a persistent state (e.g., a process)
+              and supports a 'reset' operation (e.g., can be told to
+              re-read configuration files), this value will be the
+              time elapsed (in hundredths of a second) since the
+              server was 'reset.'  For software that does not
+              have persistence or does not support a 'reset'
+              operation, this value will be zero."
+       ::= {radiusAuthServ 3}
+
+radiusAuthServConfigReset OBJECT-TYPE
+       SYNTAX INTEGER { other(1),
+                        reset(2),
+                        initializing(3),
+                        running(4)}
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+              "Status/action object to reinitialize any persistent
+               server state.  When set to reset(2), any persistent
+               server state (such as a process) is reinitialized as
+               if the server had just been started.  This value will
+               never be returned by a read operation.  When read,
+               one of the following values will be returned:
+                   other(1) - server in some unknown state;
+                   initializing(3) - server (re)initializing;
+                   running(4) - server currently running."
+       ::= {radiusAuthServ 4}
+
+radiusAuthServTotalAccessRequests OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+               "The number of packets received on the
+
+                authentication port."
+        REFERENCE "RFC 2865 section 4.1"
+        ::= { radiusAuthServ 5}
+
+radiusAuthServTotalInvalidRequests OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+              "The number of RADIUS Access-Request packets
+               received from unknown addresses."
+        REFERENCE "RFC 2865 section 4.1"
+        ::= { radiusAuthServ 6 }
+
+radiusAuthServTotalDupAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of duplicate RADIUS Access-Request
+              packets received."
+       REFERENCE "RFC 2865 section 4.1"
+       ::= { radiusAuthServ 7 }
+
+radiusAuthServTotalAccessAccepts OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Access-Accept packets sent."
+       REFERENCE "RFC 2865 section 4.2"
+       ::= { radiusAuthServ 8 }
+
+radiusAuthServTotalAccessRejects OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Reject packets sent."
+      REFERENCE "RFC 2865 section 4.3"
+      ::= { radiusAuthServ 9 }
+
+radiusAuthServTotalAccessChallenges OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Challenge packets sent."
+      REFERENCE "RFC 2865 section 4.4"
+      ::= { radiusAuthServ 10 }
+
+radiusAuthServTotalMalformedAccessRequests OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of malformed RADIUS Access-Request
+             packets received.  Bad authenticators
+             and unknown types are not included as
+             malformed Access-Requests."
+      REFERENCE "RFC 2865 section 4.1"
+      ::= { radiusAuthServ 11 }
+
+radiusAuthServTotalBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Authentication-Request packets
+             that contained invalid Message Authenticator
+             attributes received."
+      REFERENCE "RFC 2865 section 3"
+      ::= { radiusAuthServ 12 }
+
+radiusAuthServTotalPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of incoming packets
+             silently discarded for some reason other
+             than malformed, bad authenticators or
+             unknown types."
+      REFERENCE "RFC 2865 section 3"
+      ::= { radiusAuthServ 13 }
+
+radiusAuthServTotalUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type that
+             were received."
+      REFERENCE "RFC 2865 section 4"
+      ::= { radiusAuthServ 14 }
+
+radiusAuthClientTable OBJECT-TYPE
+       SYNTAX     SEQUENCE OF RadiusAuthClientEntry
+       MAX-ACCESS not-accessible
+       STATUS     deprecated
+       DESCRIPTION
+             "The (conceptual) table listing the RADIUS
+              authentication clients with which the server shares
+              a secret."
+       ::= { radiusAuthServ 15 }
+
+radiusAuthClientEntry OBJECT-TYPE
+       SYNTAX     RadiusAuthClientEntry
+       MAX-ACCESS not-accessible
+       STATUS     deprecated
+       DESCRIPTION
+             "An entry (conceptual row) representing a RADIUS
+              authentication client with which the server shares a
+              secret."
+       INDEX      { radiusAuthClientIndex }
+       ::= { radiusAuthClientTable 1 }
+
+RadiusAuthClientEntry ::= SEQUENCE {
+       radiusAuthClientIndex                           Integer32,
+       radiusAuthClientAddress                         IpAddress,
+       radiusAuthClientID                        SnmpAdminString,
+       radiusAuthServAccessRequests                    Counter32,
+       radiusAuthServDupAccessRequests                 Counter32,
+       radiusAuthServAccessAccepts                     Counter32,
+       radiusAuthServAccessRejects                     Counter32,
+       radiusAuthServAccessChallenges                  Counter32,
+       radiusAuthServMalformedAccessRequests           Counter32,
+       radiusAuthServBadAuthenticators                 Counter32,
+       radiusAuthServPacketsDropped                    Counter32,
+       radiusAuthServUnknownTypes                      Counter32
+}
+
+radiusAuthClientIndex OBJECT-TYPE
+       SYNTAX     Integer32 (1..2147483647)
+       MAX-ACCESS not-accessible
+       STATUS     deprecated
+       DESCRIPTION
+             "A number uniquely identifying each RADIUS
+              authentication client with which this server
+              communicates."
+       ::= { radiusAuthClientEntry 1 }
+
+radiusAuthClientAddress OBJECT-TYPE
+       SYNTAX     IpAddress
+       MAX-ACCESS read-only
+       STATUS     deprecated
+       DESCRIPTION
+             "The NAS-IP-Address of the RADIUS authentication client
+              referred to in this table entry."
+       REFERENCE "RFC 2865 section 2"
+       ::= { radiusAuthClientEntry 2 }
+
+radiusAuthClientID OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS read-only
+       STATUS     deprecated
+       DESCRIPTION
+             "The NAS-Identifier of the RADIUS authentication client
+              referred to in this table entry.  This is not
+              necessarily the same as sysName in MIB II."
+       REFERENCE "RFC 2865 section 5.32"
+       ::= { radiusAuthClientEntry 3 }
+
+-- Server Counters
+
+--
+-- Responses = AccessAccepts + AccessRejects + AccessChallenges
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes -  PacketsDropped - Responses = Pending
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes - PacketsDropped = entries logged
+
+radiusAuthServAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of packets received on the authentication
+
+              port from this client."
+       REFERENCE "RFC 2865 section 4.1"
+       ::= { radiusAuthClientEntry  4 }
+
+radiusAuthServDupAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of duplicate RADIUS Access-Request
+              packets received from this client."
+       REFERENCE "RFC 2865 section 4.1"
+       ::= { radiusAuthClientEntry  5 }
+
+radiusAuthServAccessAccepts OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS Access-Accept packets
+              sent to this client."
+       REFERENCE "RFC 2865 section 4.2"
+       ::= { radiusAuthClientEntry  6 }
+
+radiusAuthServAccessRejects OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+             "The number of RADIUS Access-Reject packets
+              sent to this client."
+       REFERENCE "RFC 2865 section 4.3"
+       ::= { radiusAuthClientEntry  7 }
+
+radiusAuthServAccessChallenges OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS Access-Challenge packets
+              sent to this client."
+       REFERENCE "RFC 2865 section 4.4"
+       ::= { radiusAuthClientEntry  8 }
+
+radiusAuthServMalformedAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of malformed RADIUS Access-Request
+              packets received from this client.
+              Bad authenticators and unknown types are not included
+              as malformed Access-Requests."
+       REFERENCE "RFC 2865 section 3"
+       ::= { radiusAuthClientEntry  9 }
+
+radiusAuthServBadAuthenticators OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS Authentication-Request packets
+              that contained invalid Message Authenticator
+              attributes received from this client."
+       REFERENCE "RFC 2865 section 3"
+       ::= { radiusAuthClientEntry  10 }
+
+radiusAuthServPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS deprecated
+      DESCRIPTION
+              "The number of incoming packets from this
+               client silently discarded for some reason other
+               than malformed, bad authenticators or
+               unknown types."
+       REFERENCE "RFC 2865 section 3"
+       ::= { radiusAuthClientEntry  11 }
+
+radiusAuthServUnknownTypes OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS deprecated
+       DESCRIPTION
+             "The number of RADIUS packets of unknown type that
+              were received from this client."
+       REFERENCE "RFC 2865 section 4"
+       ::= { radiusAuthClientEntry  12 }
+
+-- New MIB objects added in this revision
+
+radiusAuthClientExtTable OBJECT-TYPE
+       SYNTAX     SEQUENCE OF RadiusAuthClientExtEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "The (conceptual) table listing the RADIUS
+              authentication clients with which the server shares
+              a secret."
+       ::= { radiusAuthServ 16 }
+
+radiusAuthClientExtEntry OBJECT-TYPE
+       SYNTAX     RadiusAuthClientExtEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "An entry (conceptual row) representing a RADIUS
+              authentication client with which the server shares a
+              secret."
+       INDEX      { radiusAuthClientExtIndex }
+       ::= { radiusAuthClientExtTable 1 }
+
+RadiusAuthClientExtEntry ::= SEQUENCE {
+       radiusAuthClientExtIndex                 Integer32,
+       radiusAuthClientInetAddressType          InetAddressType,
+       radiusAuthClientInetAddress              InetAddress,
+       radiusAuthClientExtID                    SnmpAdminString,
+       radiusAuthServExtAccessRequests          Counter32,
+       radiusAuthServExtDupAccessRequests       Counter32,
+       radiusAuthServExtAccessAccepts           Counter32,
+       radiusAuthServExtAccessRejects           Counter32,
+       radiusAuthServExtAccessChallenges        Counter32,
+       radiusAuthServExtMalformedAccessRequests Counter32,
+       radiusAuthServExtBadAuthenticators       Counter32,
+       radiusAuthServExtPacketsDropped          Counter32,
+       radiusAuthServExtUnknownTypes            Counter32,
+       radiusAuthServCounterDiscontinuity       TimeTicks
+}
+
+radiusAuthClientExtIndex OBJECT-TYPE
+       SYNTAX     Integer32 (1..2147483647)
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "A number uniquely identifying each RADIUS
+              authentication client with which this server
+              communicates."
+       ::= { radiusAuthClientExtEntry 1 }
+
+radiusAuthClientInetAddressType OBJECT-TYPE
+         SYNTAX     InetAddressType
+         MAX-ACCESS read-only
+         STATUS     current
+         DESCRIPTION
+               "The type of address format used for the
+                radiusAuthClientInetAddress object."
+         ::= { radiusAuthClientExtEntry 2 }
+
+   radiusAuthClientInetAddress OBJECT-TYPE
+         SYNTAX     InetAddress
+         MAX-ACCESS read-only
+         STATUS     current
+         DESCRIPTION
+               "The IP address of the RADIUS authentication
+                client referred to in this table entry, using
+                the version-neutral IP address format."
+         ::= { radiusAuthClientExtEntry 3 }
+
+radiusAuthClientExtID OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The NAS-Identifier of the RADIUS authentication client
+              referred to in this table entry.  This is not
+              necessarily the same as sysName in MIB II."
+       REFERENCE "RFC 2865 section 5.32"
+       ::= { radiusAuthClientExtEntry 4 }
+
+-- Server Counters
+
+--
+-- Responses = AccessAccepts + AccessRejects + AccessChallenges
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes -  PacketsDropped - Responses = Pending
+--
+-- Requests - DupRequests - BadAuthenticators - MalformedRequests -
+-- UnknownTypes - PacketsDropped = entries logged
+
+radiusAuthServExtAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of packets received on the authentication
+              port from this client.  This counter may experience a
+              discontinuity when the RADIUS Server module within the
+              managed entity is reinitialized, as indicated by the
+              current value of radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 4.1"
+       ::= { radiusAuthClientExtEntry  5 }
+
+radiusAuthServExtDupAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of duplicate RADIUS Access-Request
+              packets received from this client.  This counter may
+              experience a discontinuity when the RADIUS Server
+              module within the managed entity is reinitialized, as
+              indicated by the current value of
+              radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 4.1"
+       ::= { radiusAuthClientExtEntry  6 }
+
+radiusAuthServExtAccessAccepts OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Access-Accept packets
+              sent to this client.  This counter may experience a
+              discontinuity when the RADIUS Server module within the
+              managed entity is reinitialized, as indicated by the
+              current value of radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 4.2"
+       ::= { radiusAuthClientExtEntry  7 }
+
+radiusAuthServExtAccessRejects OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "The number of RADIUS Access-Reject packets
+              sent to this client.  This counter may experience a
+              discontinuity when the RADIUS Server module within the
+
+              managed entity is reinitialized, as indicated by the
+              current value of radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 4.3"
+       ::= { radiusAuthClientExtEntry  8 }
+
+radiusAuthServExtAccessChallenges OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Access-Challenge packets
+              sent to this client.  This counter may experience a
+              discontinuity when the RADIUS Server module within the
+              managed entity is reinitialized, as indicated by the
+              current value of radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 4.4"
+       ::= { radiusAuthClientExtEntry  9 }
+
+radiusAuthServExtMalformedAccessRequests OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of malformed RADIUS Access-Request
+              packets received from this client.  Bad authenticators
+              and unknown types are not included as malformed
+              Access-Requests.  This counter may experience a
+              discontinuity when the RADIUS Server module within the
+              managed entity is reinitialized, as indicated by the
+              current value of radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 sections 3, 4.1"
+       ::= { radiusAuthClientExtEntry  10 }
+
+radiusAuthServExtBadAuthenticators OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS Authentication-Request packets
+              that contained invalid Message Authenticator
+              attributes received from this client.  This counter
+              may experience a discontinuity when the RADIUS Server
+              module within the managed entity is reinitialized, as
+              indicated by the current value of
+              radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 3"
+       ::= { radiusAuthClientExtEntry  11 }
+
+radiusAuthServExtPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      UNITS "packets"
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "The number of incoming packets from this client
+              silently discarded for some reason other than
+              malformed, bad authenticators or unknown types.
+              This counter may experience a discontinuity when the
+              RADIUS Server module within the managed entity is
+              reinitialized, as indicated by the current value of
+              radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 3"
+       ::= { radiusAuthClientExtEntry  12 }
+
+radiusAuthServExtUnknownTypes OBJECT-TYPE
+       SYNTAX Counter32
+       UNITS "packets"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of RADIUS packets of unknown type that
+              were received from this client.  This counter may
+              experience a discontinuity when the RADIUS Server
+              module within the managed entity is reinitialized, as
+              indicated by the current value of
+              radiusAuthServCounterDiscontinuity."
+       REFERENCE "RFC 2865 section 4"
+       ::= { radiusAuthClientExtEntry  13 }
+
+radiusAuthServCounterDiscontinuity OBJECT-TYPE
+         SYNTAX TimeTicks
+         UNITS "centiseconds"
+         MAX-ACCESS read-only
+         STATUS current
+         DESCRIPTION
+               "The number of centiseconds since the last
+                discontinuity in the RADIUS Server counters.
+                A discontinuity may be the result of a
+                reinitialization of the RADIUS Server module
+                within the managed entity."
+         ::= { radiusAuthClientExtEntry 14 }
+
+-- conformance information
+
+radiusAuthServMIBConformance  OBJECT IDENTIFIER
+       ::= { radiusAuthServMIB 2 }
+
+radiusAuthServMIBCompliances  OBJECT IDENTIFIER
+       ::= { radiusAuthServMIBConformance 1 }
+
+radiusAuthServMIBGroups  OBJECT IDENTIFIER
+       ::= { radiusAuthServMIBConformance 2 }
+
+-- compliance statements
+
+radiusAuthServMIBCompliance MODULE-COMPLIANCE
+            STATUS  deprecated
+            DESCRIPTION
+                  "The compliance statement for authentication
+                   servers implementing the RADIUS Authentication
+                   Server MIB.  Implementation of this module is for
+                   IPv4-only entities, or for backwards compatibility
+                   use with entities that support both IPv4 and
+                   IPv6."
+            MODULE  -- this module
+            MANDATORY-GROUPS { radiusAuthServMIBGroup }
+
+            OBJECT        radiusAuthServConfigReset
+            WRITE-SYNTAX  INTEGER { reset(2) }
+            DESCRIPTION  "The only SETable value is 'reset' (2)."
+            ::= { radiusAuthServMIBCompliances 1 }
+
+radiusAuthServMIBExtCompliance MODULE-COMPLIANCE
+            STATUS  current
+            DESCRIPTION
+                  "The compliance statement for authentication
+                   servers implementing the RADIUS Authentication
+                   Server IPv6 Extensions MIB.  Implementation of
+                   this module is for entities that support IPv6,
+                   or support IPv4 and IPv6."
+            MODULE  -- this module
+            MANDATORY-GROUPS { radiusAuthServExtMIBGroup }
+
+            OBJECT        radiusAuthServConfigReset
+            WRITE-SYNTAX  INTEGER { reset(2) }
+            DESCRIPTION  "The only SETable value is 'reset' (2)."
+
+            OBJECT radiusAuthClientInetAddressType
+            SYNTAX InetAddressType { ipv4(1), ipv6(2) }
+            DESCRIPTION
+              "An implementation is only required to support
+               IPv4 and globally unique IPv6 addresses."
+
+            OBJECT radiusAuthClientInetAddress
+            SYNTAX InetAddress ( SIZE (4|16) )
+            DESCRIPTION
+              "An implementation is only required to support
+               IPv4 and globally unique IPv6 addresses."
+            ::= { radiusAuthServMIBCompliances 2 }
+
+-- units of conformance
+
+radiusAuthServMIBGroup OBJECT-GROUP
+      OBJECTS {radiusAuthServIdent,
+               radiusAuthServUpTime,
+               radiusAuthServResetTime,
+               radiusAuthServConfigReset,
+               radiusAuthServTotalAccessRequests,
+               radiusAuthServTotalInvalidRequests,
+               radiusAuthServTotalDupAccessRequests,
+               radiusAuthServTotalAccessAccepts,
+               radiusAuthServTotalAccessRejects,
+               radiusAuthServTotalAccessChallenges,
+               radiusAuthServTotalMalformedAccessRequests,
+               radiusAuthServTotalBadAuthenticators,
+               radiusAuthServTotalPacketsDropped,
+               radiusAuthServTotalUnknownTypes,
+               radiusAuthClientAddress,
+               radiusAuthClientID,
+               radiusAuthServAccessRequests,
+               radiusAuthServDupAccessRequests,
+               radiusAuthServAccessAccepts,
+               radiusAuthServAccessRejects,
+               radiusAuthServAccessChallenges,
+               radiusAuthServMalformedAccessRequests,
+               radiusAuthServBadAuthenticators,
+               radiusAuthServPacketsDropped,
+               radiusAuthServUnknownTypes
+              }
+      STATUS  deprecated
+      DESCRIPTION
+            "The collection of objects providing management of
+             a RADIUS Authentication Server."
+      ::= { radiusAuthServMIBGroups 1 }
+
+radiusAuthServExtMIBGroup OBJECT-GROUP
+      OBJECTS {radiusAuthServIdent,
+               radiusAuthServUpTime,
+               radiusAuthServResetTime,
+               radiusAuthServConfigReset,
+               radiusAuthServTotalAccessRequests,
+               radiusAuthServTotalInvalidRequests,
+               radiusAuthServTotalDupAccessRequests,
+               radiusAuthServTotalAccessAccepts,
+               radiusAuthServTotalAccessRejects,
+               radiusAuthServTotalAccessChallenges,
+               radiusAuthServTotalMalformedAccessRequests,
+               radiusAuthServTotalBadAuthenticators,
+               radiusAuthServTotalPacketsDropped,
+               radiusAuthServTotalUnknownTypes,
+               radiusAuthClientInetAddressType,
+               radiusAuthClientInetAddress,
+               radiusAuthClientExtID,
+               radiusAuthServExtAccessRequests,
+               radiusAuthServExtDupAccessRequests,
+               radiusAuthServExtAccessAccepts,
+               radiusAuthServExtAccessRejects,
+               radiusAuthServExtAccessChallenges,
+               radiusAuthServExtMalformedAccessRequests,
+               radiusAuthServExtBadAuthenticators,
+               radiusAuthServExtPacketsDropped,
+               radiusAuthServExtUnknownTypes,
+               radiusAuthServCounterDiscontinuity
+              }
+      STATUS  current
+      DESCRIPTION
+            "The collection of objects providing management of
+             a RADIUS Authentication Server."
+      ::= { radiusAuthServMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/RADIUS-DYNAUTH-CLIENT-MIB.mib b/snmp_builder/mibs/RADIUS-DYNAUTH-CLIENT-MIB.mib
new file mode 100644
index 0000000..545f74e
--- /dev/null
+++ b/snmp_builder/mibs/RADIUS-DYNAUTH-CLIENT-MIB.mib
@@ -0,0 +1,767 @@
+RADIUS-DYNAUTH-CLIENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE,
+       Counter32, Gauge32, Integer32,
+       mib-2, TimeTicks    FROM SNMPv2-SMI         -- [RFC2578]
+       SnmpAdminString     FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
+       InetAddressType, InetAddress,
+       InetPortNumber      FROM INET-ADDRESS-MIB   -- [RFC4001]
+       MODULE-COMPLIANCE,
+       OBJECT-GROUP        FROM SNMPv2-CONF;       -- [RFC2580]
+
+radiusDynAuthClientMIB MODULE-IDENTITY
+       LAST-UPDATED "200608290000Z" -- 29 August 2006
+       ORGANIZATION "IETF RADEXT Working Group"
+       CONTACT-INFO
+              " Stefaan De Cnodder
+
+                Alcatel
+                Francis Wellesplein 1
+                B-2018 Antwerp
+                Belgium
+
+                Phone: +32 3 240 85 15
+                EMail: stefaan.de_cnodder@alcatel.be
+
+                Nagi Reddy Jonnala
+                Cisco Systems, Inc.
+                Divyasree Chambers, B Wing,
+                O'Shaugnessy Road,
+                Bangalore-560027, India.
+
+                Phone: +91 94487 60828
+                EMail: njonnala@cisco.com
+
+                Murtaza Chiba
+                Cisco Systems, Inc.
+                170 West Tasman Dr.
+                San Jose CA, 95134
+
+                Phone: +1 408 525 7198
+                EMail: mchiba@cisco.com "
+       DESCRIPTION
+           "The MIB module for entities implementing the client
+            side of the Dynamic Authorization Extensions to the
+            Remote Authentication Dial-In User Service (RADIUS)
+            protocol. Copyright (C) The Internet Society (2006).
+            Initial version as published in RFC 4672;
+            for full legal notices see the RFC itself."
+
+       REVISION "200609290000Z" -- 29 August 2006
+       DESCRIPTION "Initial version as published in RFC 4672"
+       ::= { mib-2 145 }
+
+radiusDynAuthClientMIBObjects OBJECT IDENTIFIER ::=
+                                      { radiusDynAuthClientMIB 1 }
+
+radiusDynAuthClientScalars    OBJECT IDENTIFIER ::=
+                               { radiusDynAuthClientMIBObjects 1 }
+
+radiusDynAuthClientDisconInvalidServerAddresses OBJECT-TYPE
+       SYNTAX Counter32
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of Disconnect-Ack and Disconnect-NAK packets
+
+              received from unknown addresses.  This counter may
+              experience a discontinuity when the DAC module
+              (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       ::= { radiusDynAuthClientScalars 1 }
+
+radiusDynAuthClientCoAInvalidServerAddresses OBJECT-TYPE
+       SYNTAX Counter32
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The number of CoA-Ack and CoA-NAK packets received from
+              unknown addresses.  Disconnect-NAK packets received
+              from unknown addresses.  This counter may experience a
+              discontinuity when the DAC module (re)starts, as
+              indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       ::= { radiusDynAuthClientScalars 2 }
+
+radiusDynAuthServerTable OBJECT-TYPE
+       SYNTAX SEQUENCE OF RadiusDynAuthServerEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "The (conceptual) table listing the RADIUS Dynamic
+              Authorization Servers with which the client shares a
+              secret."
+       ::= { radiusDynAuthClientMIBObjects 2 }
+
+radiusDynAuthServerEntry OBJECT-TYPE
+       SYNTAX     RadiusDynAuthServerEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "An entry (conceptual row) representing one Dynamic
+              Authorization Server with which the client shares a
+              secret."
+       INDEX      { radiusDynAuthServerIndex }
+       ::= { radiusDynAuthServerTable 1 }
+
+RadiusDynAuthServerEntry ::= SEQUENCE {
+       radiusDynAuthServerIndex                     Integer32,
+       radiusDynAuthServerAddressType               InetAddressType,
+       radiusDynAuthServerAddress                   InetAddress,
+       radiusDynAuthServerClientPortNumber          InetPortNumber,
+       radiusDynAuthServerID                        SnmpAdminString,
+       radiusDynAuthClientRoundTripTime             TimeTicks,
+       radiusDynAuthClientDisconRequests            Counter32,
+       radiusDynAuthClientDisconAuthOnlyRequests    Counter32,
+       radiusDynAuthClientDisconRetransmissions     Counter32,
+       radiusDynAuthClientDisconAcks                Counter32,
+       radiusDynAuthClientDisconNaks                Counter32,
+       radiusDynAuthClientDisconNakAuthOnlyRequest  Counter32,
+       radiusDynAuthClientDisconNakSessNoContext    Counter32,
+       radiusDynAuthClientMalformedDisconResponses  Counter32,
+       radiusDynAuthClientDisconBadAuthenticators   Counter32,
+       radiusDynAuthClientDisconPendingRequests     Gauge32,
+       radiusDynAuthClientDisconTimeouts            Counter32,
+       radiusDynAuthClientDisconPacketsDropped      Counter32,
+       radiusDynAuthClientCoARequests               Counter32,
+       radiusDynAuthClientCoAAuthOnlyRequest        Counter32,
+       radiusDynAuthClientCoARetransmissions        Counter32,
+       radiusDynAuthClientCoAAcks                   Counter32,
+       radiusDynAuthClientCoANaks                   Counter32,
+       radiusDynAuthClientCoANakAuthOnlyRequest     Counter32,
+       radiusDynAuthClientCoANakSessNoContext       Counter32,
+       radiusDynAuthClientMalformedCoAResponses     Counter32,
+       radiusDynAuthClientCoABadAuthenticators      Counter32,
+       radiusDynAuthClientCoAPendingRequests        Gauge32,
+       radiusDynAuthClientCoATimeouts               Counter32,
+       radiusDynAuthClientCoAPacketsDropped         Counter32,
+       radiusDynAuthClientUnknownTypes              Counter32,
+       radiusDynAuthClientCounterDiscontinuity      TimeTicks
+}
+
+radiusDynAuthServerIndex OBJECT-TYPE
+       SYNTAX     Integer32 (1..2147483647)
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "A number uniquely identifying each RADIUS Dynamic
+              Authorization Server with which this Dynamic
+              Authorization Client communicates.  This number is
+              allocated by the agent implementing this MIB module
+              and is unique in this context."
+       ::= { radiusDynAuthServerEntry 1 }
+
+radiusDynAuthServerAddressType OBJECT-TYPE
+       SYNTAX     InetAddressType
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The type of IP address of the RADIUS Dynamic
+              Authorization Server referred to in this table entry."
+       ::= { radiusDynAuthServerEntry 2 }
+
+radiusDynAuthServerAddress OBJECT-TYPE
+       SYNTAX     InetAddress
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The IP address value of the RADIUS Dynamic
+              Authorization Server referred to in this table entry
+              using the version neutral IP address format.  The type
+              of this address is determined by the value of the
+              radiusDynAuthServerAddressType object."
+       ::= { radiusDynAuthServerEntry 3 }
+
+radiusDynAuthServerClientPortNumber OBJECT-TYPE
+       SYNTAX     InetPortNumber (1..65535)
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The UDP destination port that the RADIUS Dynamic
+              Authorization Client is using to send requests to this
+              server.  The value zero is invalid."
+       ::= { radiusDynAuthServerEntry 4 }
+
+radiusDynAuthServerID OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The NAS-Identifier of the RADIUS Dynamic Authorization
+              Server referred to in this table entry.  This is not
+              necessarily the same as sysName in MIB II."
+       REFERENCE
+             "RFC 2865, Section 5.32, NAS-Identifier."
+       ::= { radiusDynAuthServerEntry 5 }
+
+radiusDynAuthClientRoundTripTime OBJECT-TYPE
+       SYNTAX     TimeTicks
+       UNITS      "hundredths of a second"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The time interval (in hundredths of a second) between
+              the most recent Disconnect or CoA request and the
+              receipt of the corresponding Disconnect or CoA reply.
+              A value of zero is returned if no reply has been
+              received yet from this server."
+       ::= { radiusDynAuthServerEntry 6 }
+
+radiusDynAuthClientDisconRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-Requests sent
+              to this Dynamic Authorization Server.  This also
+              includes the RADIUS Disconnect-Requests that have a
+              Service-Type attribute with value 'Authorize Only'.
+              Disconnect-NAK packets received from unknown addresses.
+              This counter may experience a discontinuity when the
+              DAC module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 7 }
+
+radiusDynAuthClientDisconAuthOnlyRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-Requests that include a
+              Service-Type attribute with value 'Authorize Only'
+              sent to this Dynamic Authorization Server.
+              Disconnect-NAK packets received from unknown addresses.
+              This counter may experience a discontinuity when the
+              DAC module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 8 }
+
+radiusDynAuthClientDisconRetransmissions OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "retransmissions"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-request packets
+              retransmitted to this RADIUS Dynamic Authorization
+              Server.  Disconnect-NAK packets received from unknown
+              addresses.  This counter may experience a discontinuity
+              when the DAC module (re)starts, as indicated by the
+              value of radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 9 }
+
+radiusDynAuthClientDisconAcks  OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-ACK packets
+              received from this Dynamic Authorization Server.  This
+              counter may experience a discontinuity when the DAC
+              module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 10 }
+
+radiusDynAuthClientDisconNaks OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-NAK packets
+              received from this Dynamic Authorization Server.
+              This includes the RADIUS Disconnect-NAK packets
+              received with a Service-Type attribute with value
+              'Authorize Only' and the RADIUS Disconnect-NAK
+              packets received if no session context was found.  This
+              counter may experience a discontinuity when the DAC
+              module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 11 }
+
+radiusDynAuthClientDisconNakAuthOnlyRequest OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-NAK packets
+              that include a Service-Type attribute with value
+              'Authorize Only' received from this Dynamic
+              Authorization Server.  This counter may experience a
+              discontinuity when the DAC module (re)starts, as
+
+              indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 12 }
+
+radiusDynAuthClientDisconNakSessNoContext OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-NAK packets
+              received from this Dynamic Authorization Server
+              because no session context was found; i.e., it
+              includes an Error-Cause attribute with value 503
+              ('Session Context Not Found').  This counter may
+              experience a discontinuity when the DAC module
+              (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 13 }
+
+radiusDynAuthClientMalformedDisconResponses OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of malformed RADIUS Disconnect-Ack and
+              Disconnect-NAK packets received from this Dynamic
+              Authorization Server.  Bad authenticators and unknown
+              types are not included as malformed Disconnect-Ack and
+              Disconnect-NAK packets.  This counter may experience a
+              discontinuity when the DAC module (re)starts, as
+              indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM), and
+              Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 14 }
+
+radiusDynAuthClientDisconBadAuthenticators OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-Ack and Disconnect-NAK
+              packets that contained invalid Authenticator field
+              received from this Dynamic Authorization Server.  This
+              counter may experience a discontinuity when the DAC
+              module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM), and
+              Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 15 }
+
+radiusDynAuthClientDisconPendingRequests OBJECT-TYPE
+       SYNTAX     Gauge32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-request packets
+              destined for this server that have not yet timed out
+              or received a response.  This variable is incremented
+              when an Disconnect-Request is sent and decremented
+              due to receipt of a Disconnect-Ack, a Disconnect-NAK,
+              a timeout, or a retransmission."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 16 }
+
+radiusDynAuthClientDisconTimeouts OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "timeouts"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of Disconnect request timeouts to this
+              server.  After a timeout, the client may retry to the
+              same server or give up.  A retry to the same server is
+              counted as a retransmit and as a timeout.  A send
+              to a different server is counted as a
+              Disconnect-Request and as a timeout.  This counter
+              may experience a discontinuity when the DAC module
+              (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthServerEntry 17 }
+
+radiusDynAuthClientDisconPacketsDropped OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of incoming Disconnect-Ack and
+              Disconnect-NAK packets from this Dynamic Authorization
+              Server silently discarded by the client application for
+              some reason other than malformed, bad authenticators,
+              or unknown types.  This counter may experience a
+              discontinuity when the DAC module (re)starts, as
+              indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM), and
+              Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 18 }
+
+radiusDynAuthClientCoARequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-Requests sent to this
+              Dynamic Authorization Server.  This also includes
+              CoA requests that have a Service-Type attribute
+              with value 'Authorize Only'.  This counter may
+              experience a discontinuity when the DAC module
+              (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 19 }
+
+radiusDynAuthClientCoAAuthOnlyRequest OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-requests that include a
+              Service-Type attribute with value 'Authorize Only'
+              sent to this Dynamic Authorization Client.  This
+              counter may experience a discontinuity when the DAC
+              module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 20 }
+
+radiusDynAuthClientCoARetransmissions OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "retransmissions"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-request packets
+              retransmitted to this RADIUS Dynamic Authorization
+              Server.  This counter may experience a discontinuity
+              when the DAC module (re)starts, as indicated by the
+              value of radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 21 }
+
+radiusDynAuthClientCoAAcks  OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-ACK packets received from
+              this Dynamic Authorization Server.  This counter may
+              experience a discontinuity when the DAC module
+              (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 22 }
+
+radiusDynAuthClientCoANaks OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-NAK packets received from
+              this Dynamic Authorization Server.  This includes the
+              RADIUS CoA-NAK packets received with a Service-Type
+              attribute with value 'Authorize Only' and the RADIUS
+              CoA-NAK packets received because no session context
+
+              was found.  This counter may experience a discontinuity
+              when the DAC module (re)starts, as indicated by the
+              value of radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 23 }
+
+radiusDynAuthClientCoANakAuthOnlyRequest OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-NAK packets that include a
+              Service-Type attribute with value 'Authorize Only'
+              received from this Dynamic Authorization Server.  This
+              counter may experience a discontinuity when the DAC
+              module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 24 }
+
+radiusDynAuthClientCoANakSessNoContext OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-NAK packets received from
+              this Dynamic Authorization Server because no session
+              context was found; i.e., it includes an Error-Cause
+              attribute with value 503 ('Session Context Not Found').
+              This counter may experience a discontinuity when the
+              DAC module (re)starts as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 25 }
+
+radiusDynAuthClientMalformedCoAResponses OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of malformed RADIUS CoA-Ack and CoA-NAK
+              packets received from this Dynamic Authorization
+              Server.  Bad authenticators and unknown types are
+              not included as malformed CoA-Ack and CoA-NAK packets.
+              This counter may experience a discontinuity when the
+              DAC module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA), and Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 26 }
+
+radiusDynAuthClientCoABadAuthenticators OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-Ack and CoA-NAK packets
+              that contained invalid Authenticator field
+              received from this Dynamic Authorization Server.
+              This counter may experience a discontinuity when the
+              DAC module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA), and Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 27 }
+
+radiusDynAuthClientCoAPendingRequests OBJECT-TYPE
+       SYNTAX     Gauge32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-request packets destined for
+              this server that have not yet timed out or received a
+              response.  This variable is incremented when an
+              CoA-Request is sent and decremented due to receipt of
+              a CoA-Ack, a CoA-NAK, or a timeout, or a
+              retransmission."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 28 }
+
+radiusDynAuthClientCoATimeouts OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "timeouts"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of CoA request timeouts to this server.
+              After a timeout, the client may retry to the same
+              server or give up.  A retry to the same server is
+              counted as a retransmit and as a timeout.  A send to
+              a different server is counted as a CoA-Request and
+              as a timeout.  This counter may experience a
+              discontinuity when the DAC module (re)starts, as
+              indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthServerEntry 29 }
+
+radiusDynAuthClientCoAPacketsDropped OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of incoming CoA-Ack and CoA-NAK from this
+              Dynamic Authorization Server silently discarded by the
+              client application for some reason other than
+              malformed, bad authenticators, or unknown types.  This
+              counter may experience a discontinuity when the DAC
+              module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA), and Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 30 }
+
+radiusDynAuthClientUnknownTypes OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of incoming packets of unknown types
+              that were received on the Dynamic Authorization port.
+              This counter may experience a discontinuity when the
+              DAC module (re)starts, as indicated by the value of
+              radiusDynAuthClientCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.3, Packet Format."
+       ::= { radiusDynAuthServerEntry 31 }
+
+radiusDynAuthClientCounterDiscontinuity OBJECT-TYPE
+       SYNTAX TimeTicks
+       UNITS  "hundredths of a second"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The time (in hundredths of a second) since the
+              last counter discontinuity.  A discontinuity may
+              be the result of a reinitialization of the DAC
+              module within the managed entity."
+       ::= { radiusDynAuthServerEntry 32 }
+
+-- conformance information
+
+radiusDynAuthClientMIBConformance
+       OBJECT IDENTIFIER ::= { radiusDynAuthClientMIB 2 }
+radiusDynAuthClientMIBCompliances
+       OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 1 }
+radiusDynAuthClientMIBGroups
+       OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 2 }
+-- compliance statements
+
+radiusDynAuthClientMIBCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+             "The compliance statement for entities implementing
+              the RADIUS Dynamic Authorization Client.
+              Implementation of this module is for entities that
+              support IPv4 and/or IPv6."
+       MODULE  -- this module
+       MANDATORY-GROUPS { radiusDynAuthClientMIBGroup }
+
+       OBJECT             radiusDynAuthServerAddressType
+       SYNTAX             InetAddressType { ipv4(1), ipv6(2) }
+       DESCRIPTION
+           "An implementation is only required to support IPv4 and
+            globally unique IPv6 addresses."
+
+       OBJECT             radiusDynAuthServerAddress
+       SYNTAX             InetAddress (SIZE(4|16))
+       DESCRIPTION
+           "An implementation is only required to support IPv4 and
+            globally unique IPv6 addresses."
+
+       GROUP              radiusDynAuthClientAuthOnlyGroup
+       DESCRIPTION
+             "Only required for Dynamic Authorization Clients that
+              are supporting Service-Type attributes with value
+              'Authorize-Only'."
+
+       GROUP              radiusDynAuthClientNoSessGroup
+       DESCRIPTION
+             "This group is not required if the Dynamic
+              Authorization Server cannot easily determine whether
+              a session exists (e.g., in case of a RADIUS
+              proxy)."
+       ::= { radiusDynAuthClientMIBCompliances 1 }
+
+-- units of conformance
+
+radiusDynAuthClientMIBGroup OBJECT-GROUP
+       OBJECTS { radiusDynAuthClientDisconInvalidServerAddresses,
+                 radiusDynAuthClientCoAInvalidServerAddresses,
+                 radiusDynAuthServerAddressType,
+                 radiusDynAuthServerAddress,
+                 radiusDynAuthServerClientPortNumber,
+                 radiusDynAuthServerID,
+                 radiusDynAuthClientRoundTripTime,
+                 radiusDynAuthClientDisconRequests,
+                 radiusDynAuthClientDisconRetransmissions,
+                 radiusDynAuthClientDisconAcks,
+                 radiusDynAuthClientDisconNaks,
+                 radiusDynAuthClientMalformedDisconResponses,
+                 radiusDynAuthClientDisconBadAuthenticators,
+                 radiusDynAuthClientDisconPendingRequests,
+                 radiusDynAuthClientDisconTimeouts,
+                 radiusDynAuthClientDisconPacketsDropped,
+                 radiusDynAuthClientCoARequests,
+                 radiusDynAuthClientCoARetransmissions,
+                 radiusDynAuthClientCoAAcks,
+                 radiusDynAuthClientCoANaks,
+                 radiusDynAuthClientMalformedCoAResponses,
+                 radiusDynAuthClientCoABadAuthenticators,
+                 radiusDynAuthClientCoAPendingRequests,
+                 radiusDynAuthClientCoATimeouts,
+                 radiusDynAuthClientCoAPacketsDropped,
+                 radiusDynAuthClientUnknownTypes,
+                 radiusDynAuthClientCounterDiscontinuity
+               }
+       STATUS  current
+       DESCRIPTION
+             "The collection of objects providing management of
+              a RADIUS Dynamic Authorization Client."
+       ::= { radiusDynAuthClientMIBGroups 1 }
+
+radiusDynAuthClientAuthOnlyGroup OBJECT-GROUP
+       OBJECTS { radiusDynAuthClientDisconAuthOnlyRequests,
+                 radiusDynAuthClientDisconNakAuthOnlyRequest,
+                 radiusDynAuthClientCoAAuthOnlyRequest,
+                 radiusDynAuthClientCoANakAuthOnlyRequest
+               }
+       STATUS  current
+       DESCRIPTION
+             "The collection of objects supporting the RADIUS
+              messages including Service-Type attribute with
+              value 'Authorize Only'."
+       ::= { radiusDynAuthClientMIBGroups 2 }
+
+radiusDynAuthClientNoSessGroup OBJECT-GROUP
+       OBJECTS { radiusDynAuthClientDisconNakSessNoContext,
+                 radiusDynAuthClientCoANakSessNoContext
+               }
+       STATUS  current
+       DESCRIPTION
+             "The collection of objects supporting the RADIUS
+              messages that are referring to non-existing sessions."
+       ::= { radiusDynAuthClientMIBGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/RADIUS-DYNAUTH-SERVER-MIB.mib b/snmp_builder/mibs/RADIUS-DYNAUTH-SERVER-MIB.mib
new file mode 100644
index 0000000..ec8de10
--- /dev/null
+++ b/snmp_builder/mibs/RADIUS-DYNAUTH-SERVER-MIB.mib
@@ -0,0 +1,699 @@
+RADIUS-DYNAUTH-SERVER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE,
+       Counter32, Integer32, mib-2,
+       TimeTicks         FROM SNMPv2-SMI             -- [RFC2578]
+       SnmpAdminString   FROM SNMP-FRAMEWORK-MIB     -- [RFC3411]
+       InetAddressType,
+       InetAddress       FROM INET-ADDRESS-MIB       -- [RFC4001]
+       MODULE-COMPLIANCE,
+       OBJECT-GROUP  FROM SNMPv2-CONF;               -- [RFC2580]
+
+radiusDynAuthServerMIB MODULE-IDENTITY
+       LAST-UPDATED "200608290000Z" -- 29 August 2006
+       ORGANIZATION "IETF RADEXT Working Group"
+       CONTACT-INFO
+              " Stefaan De Cnodder
+                Alcatel
+                Francis Wellesplein 1
+                B-2018 Antwerp
+                Belgium
+
+                Phone: +32 3 240 85 15
+                EMail: stefaan.de_cnodder@alcatel.be
+
+                Nagi Reddy Jonnala
+                Cisco Systems, Inc.
+                Divyasree Chambers, B Wing,
+                O'Shaugnessy Road,
+                Bangalore-560027, India.
+
+                Phone: +91 94487 60828
+                EMail: njonnala@cisco.com
+
+                Murtaza Chiba
+                Cisco Systems, Inc.
+                170 West Tasman Dr.
+                San Jose CA, 95134
+
+                Phone: +1 408 525 7198
+                EMail: mchiba@cisco.com "
+       DESCRIPTION
+           "The MIB module for entities implementing the server
+            side of the Dynamic Authorization Extensions to the
+            Remote Authentication Dial-In User Service (RADIUS)
+            protocol.  Copyright (C) The Internet Society (2006).
+
+            Initial version as published in RFC 4673; for full
+            legal notices see the RFC itself."
+
+       REVISION "200608290000Z" -- 29 August 2006
+       DESCRIPTION "Initial version as published in RFC 4673."
+       ::= { mib-2 146 }
+
+radiusDynAuthServerMIBObjects OBJECT IDENTIFIER ::=
+                                      { radiusDynAuthServerMIB 1 }
+
+radiusDynAuthServerScalars    OBJECT IDENTIFIER ::=
+                               { radiusDynAuthServerMIBObjects 1 }
+
+radiusDynAuthServerDisconInvalidClientAddresses OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of Disconnect-Request packets received from
+             unknown addresses.  This counter may experience a
+             discontinuity when the DAS module (re)starts, as
+             indicated by the value of
+             radiusDynAuthServerCounterDiscontinuity."
+      ::= { radiusDynAuthServerScalars 1 }
+
+radiusDynAuthServerCoAInvalidClientAddresses OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of CoA-Request packets received from unknown
+             addresses.  This counter may experience a discontinuity
+             when the DAS module (re)starts, as indicated by the
+             value of radiusDynAuthServerCounterDiscontinuity."
+      ::= { radiusDynAuthServerScalars 2 }
+
+radiusDynAuthServerIdentifier OBJECT-TYPE
+      SYNTAX SnmpAdminString
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "The NAS-Identifier of the RADIUS Dynamic Authorization
+              Server.  This is not necessarily the same as sysName in
+              MIB II."
+      REFERENCE
+             "RFC 2865, Section 5.32, NAS-Identifier."
+      ::= { radiusDynAuthServerScalars 3 }
+
+radiusDynAuthClientTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF RadiusDynAuthClientEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "The (conceptual) table listing the RADIUS Dynamic
+             Authorization Clients with which the server shares a
+             secret."
+      ::= { radiusDynAuthServerMIBObjects 2 }
+
+radiusDynAuthClientEntry OBJECT-TYPE
+       SYNTAX     RadiusDynAuthClientEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "An entry (conceptual row) representing one Dynamic
+              Authorization Client with which the server shares a
+              secret."
+       INDEX      { radiusDynAuthClientIndex }
+       ::= { radiusDynAuthClientTable 1 }
+
+RadiusDynAuthClientEntry ::= SEQUENCE {
+       radiusDynAuthClientIndex                     Integer32,
+       radiusDynAuthClientAddressType               InetAddressType,
+       radiusDynAuthClientAddress                   InetAddress,
+       radiusDynAuthServDisconRequests              Counter32,
+       radiusDynAuthServDisconAuthOnlyRequests      Counter32,
+       radiusDynAuthServDupDisconRequests           Counter32,
+       radiusDynAuthServDisconAcks                  Counter32,
+       radiusDynAuthServDisconNaks                  Counter32,
+       radiusDynAuthServDisconNakAuthOnlyRequests   Counter32,
+       radiusDynAuthServDisconNakSessNoContext      Counter32,
+       radiusDynAuthServDisconUserSessRemoved       Counter32,
+       radiusDynAuthServMalformedDisconRequests     Counter32,
+       radiusDynAuthServDisconBadAuthenticators     Counter32,
+       radiusDynAuthServDisconPacketsDropped        Counter32,
+       radiusDynAuthServCoARequests                 Counter32,
+       radiusDynAuthServCoAAuthOnlyRequests         Counter32,
+       radiusDynAuthServDupCoARequests              Counter32,
+       radiusDynAuthServCoAAcks                     Counter32,
+       radiusDynAuthServCoANaks                     Counter32,
+       radiusDynAuthServCoANakAuthOnlyRequests      Counter32,
+       radiusDynAuthServCoANakSessNoContext         Counter32,
+       radiusDynAuthServCoAUserSessChanged          Counter32,
+       radiusDynAuthServMalformedCoARequests        Counter32,
+       radiusDynAuthServCoABadAuthenticators        Counter32,
+       radiusDynAuthServCoAPacketsDropped           Counter32,
+       radiusDynAuthServUnknownTypes                Counter32,
+       radiusDynAuthServerCounterDiscontinuity      TimeTicks
+}
+
+radiusDynAuthClientIndex OBJECT-TYPE
+       SYNTAX     Integer32 (1..2147483647)
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+             "A number uniquely identifying each RADIUS Dynamic
+              Authorization Client with which this Dynamic
+              Authorization Server communicates.  This number is
+              allocated by the agent implementing this MIB module
+              and is unique in this context."
+       ::= { radiusDynAuthClientEntry 1 }
+
+radiusDynAuthClientAddressType OBJECT-TYPE
+       SYNTAX     InetAddressType
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The type of IP address of the RADIUS Dynamic
+              Authorization Client referred to in this table entry."
+       ::= { radiusDynAuthClientEntry 2 }
+
+radiusDynAuthClientAddress OBJECT-TYPE
+       SYNTAX     InetAddress
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The IP address value of the RADIUS Dynamic
+              Authorization Client referred to in this table entry,
+              using the version neutral IP address format.  The type
+              of this address is determined by the value of
+              the radiusDynAuthClientAddressType object."
+       ::= { radiusDynAuthClientEntry 3 }
+
+radiusDynAuthServDisconRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-Requests received
+              from this Dynamic Authorization Client.  This also
+              includes the RADIUS Disconnect-Requests that have a
+              Service-Type attribute with value 'Authorize Only'.
+              This counter may experience a discontinuity when the
+
+              DAS module (re)starts as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 4 }
+
+radiusDynAuthServDisconAuthOnlyRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-Requests that include
+              a Service-Type attribute with value 'Authorize Only'
+              received from this Dynamic Authorization Client.  This
+              counter may experience a discontinuity when the DAS
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 5 }
+
+radiusDynAuthServDupDisconRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of duplicate RADIUS Disconnect-Request
+              packets received from this Dynamic Authorization
+              Client.  This counter may experience a discontinuity
+              when the DAS module (re)starts, as indicated by the
+              value of radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 6 }
+
+radiusDynAuthServDisconAcks  OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-ACK packets sent to
+              this Dynamic Authorization Client.  This counter may
+              experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 7 }
+
+radiusDynAuthServDisconNaks OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-NAK packets
+              sent to this Dynamic Authorization Client.  This
+              includes the RADIUS Disconnect-NAK packets sent
+              with a Service-Type attribute with value 'Authorize
+              Only' and the RADIUS Disconnect-NAK packets sent
+              because no session context was found.  This counter
+              may experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 8 }
+
+radiusDynAuthServDisconNakAuthOnlyRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-NAK packets that
+              include a Service-Type attribute with value
+              'Authorize Only' sent to this Dynamic Authorization
+              Client.  This counter may experience a discontinuity
+              when the DAS module (re)starts, as indicated by the
+              value of radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 9 }
+
+radiusDynAuthServDisconNakSessNoContext OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-NAK packets
+              sent to this Dynamic Authorization Client
+              because no session context was found.  This counter may
+
+              experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 10 }
+
+radiusDynAuthServDisconUserSessRemoved OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "sessions"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of user sessions removed for the
+              Disconnect-Requests received from this
+              Dynamic Authorization Client.  Depending on site-
+              specific policies, a single Disconnect request
+              can remove multiple user sessions.  In cases where
+              this Dynamic Authorization Server has no
+              knowledge of the number of user sessions that
+              are affected by a single request, each such
+              Disconnect-Request will count as a single
+              affected user session only.  This counter may experience
+              a discontinuity when the DAS module (re)starts, as
+              indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM)."
+       ::= { radiusDynAuthClientEntry 11 }
+
+radiusDynAuthServMalformedDisconRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of malformed RADIUS Disconnect-Request
+              packets received from this Dynamic Authorization
+              Client.  Bad authenticators and unknown types are not
+              included as malformed Disconnect-Requests.  This counter
+              may experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM), and
+              Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry 12 }
+
+radiusDynAuthServDisconBadAuthenticators OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS Disconnect-Request packets
+              that contained an invalid Authenticator field
+              received from this Dynamic Authorization Client.  This
+              counter may experience a discontinuity when the DAS
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM), and
+              Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry 13 }
+
+radiusDynAuthServDisconPacketsDropped OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of incoming Disconnect-Requests
+              from this Dynamic Authorization Client silently
+              discarded by the server application for some reason
+              other than malformed, bad authenticators, or unknown
+              types.  This counter may experience a discontinuity
+              when the DAS module (re)starts, as indicated by the
+              value of radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.1, Disconnect Messages (DM), and
+              Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry 14 }
+
+radiusDynAuthServCoARequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-requests received from this
+              Dynamic Authorization Client.  This also includes
+              the CoA requests that have a Service-Type attribute
+              with value 'Authorize Only'.  This counter may
+              experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 15 }
+
+radiusDynAuthServCoAAuthOnlyRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-requests that include a
+              Service-Type attribute with value 'Authorize Only'
+              received from this Dynamic Authorization Client.  This
+              counter may experience a discontinuity when the DAS
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 16 }
+
+radiusDynAuthServDupCoARequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of duplicate RADIUS CoA-Request packets
+              received from this Dynamic Authorization Client.  This
+              counter may experience a discontinuity when the DAS
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 17 }
+
+radiusDynAuthServCoAAcks  OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-ACK packets sent to this
+              Dynamic Authorization Client.  This counter may
+              experience a discontinuity when the DAS module
+
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 18 }
+
+radiusDynAuthServCoANaks OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-NAK packets sent to
+              this Dynamic Authorization Client.  This includes
+              the RADIUS CoA-NAK packets sent with a Service-Type
+              attribute with value 'Authorize Only' and the RADIUS
+              CoA-NAK packets sent because no session context was
+              found.  This counter may experience a discontinuity
+              when the DAS module (re)starts, as indicated by the
+              value of radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 19 }
+
+radiusDynAuthServCoANakAuthOnlyRequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-NAK packets that include a
+              Service-Type attribute with value 'Authorize Only'
+              sent to this Dynamic Authorization Client.  This counter
+              may experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 20 }
+
+radiusDynAuthServCoANakSessNoContext OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "replies"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-NAK packets sent to this
+              Dynamic Authorization Client because no session context
+              was found.  This counter may experience a discontinuity
+              when the DAS module (re)starts, as indicated by the
+              value of radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 21 }
+
+radiusDynAuthServCoAUserSessChanged OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "sessions"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of user sessions authorization
+              changed for the CoA-Requests received from this
+              Dynamic Authorization Client.  Depending on site-
+              specific policies, a single CoA request can change
+              multiple user sessions' authorization.  In cases where
+              this Dynamic Authorization Server has no knowledge of
+              the number of user sessions that are affected by a
+              single request, each such CoA-Request will
+              count as a single affected user session only.  This
+              counter may experience a discontinuity when the DAS
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA)."
+       ::= { radiusDynAuthClientEntry 22 }
+
+radiusDynAuthServMalformedCoARequests OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of malformed RADIUS CoA-Request packets
+              received from this Dynamic Authorization Client.  Bad
+              authenticators and unknown types are not included as
+              malformed CoA-Requests.  This counter may experience a
+              discontinuity when the DAS module (re)starts, as
+              indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA), and Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry  23 }
+
+radiusDynAuthServCoABadAuthenticators OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of RADIUS CoA-Request packets that
+              contained an invalid Authenticator field received
+              from this Dynamic Authorization Client.  This counter
+              may experience a discontinuity when the DAS module
+              (re)starts, as indicated by the value of
+                radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA), and Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry 24 }
+
+radiusDynAuthServCoAPacketsDropped OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of incoming CoA packets from this
+              Dynamic Authorization Client silently discarded
+              by the server application for some reason other than
+              malformed, bad authenticators, or unknown types.  This
+              counter may experience a discontinuity when the DAS
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.2, Change-of-Authorization
+              Messages (CoA), and Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry 25 }
+
+radiusDynAuthServUnknownTypes OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "requests"
+       MAX-ACCESS read-only
+       STATUS     current
+       DESCRIPTION
+             "The number of incoming packets of unknown types that
+              were received on the Dynamic Authorization port.  This
+              counter may experience a discontinuity when the DAS
+
+              module (re)starts, as indicated by the value of
+              radiusDynAuthServerCounterDiscontinuity."
+       REFERENCE
+             "RFC 3576, Section 2.3, Packet Format."
+       ::= { radiusDynAuthClientEntry 26 }
+
+radiusDynAuthServerCounterDiscontinuity OBJECT-TYPE
+       SYNTAX TimeTicks
+       UNITS  "hundredths of a second"
+       MAX-ACCESS read-only
+       STATUS current
+       DESCRIPTION
+             "The time (in hundredths of a second) since the
+              last counter discontinuity.  A discontinuity may
+              be the result of a reinitialization of the DAS
+              module within the managed entity."
+       ::= { radiusDynAuthClientEntry 27 }
+
+-- conformance information
+
+radiusDynAuthServerMIBConformance
+       OBJECT IDENTIFIER ::= { radiusDynAuthServerMIB 2 }
+radiusDynAuthServerMIBCompliances
+       OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 1 }
+radiusDynAuthServerMIBGroups
+       OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 2 }
+
+-- compliance statements
+
+radiusAuthServerMIBCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+             "The compliance statement for entities implementing
+              the RADIUS Dynamic Authorization Server.  Implementation
+              of this module is for entities that support IPv4 and/or
+              IPv6."
+       MODULE  -- this module
+       MANDATORY-GROUPS { radiusDynAuthServerMIBGroup }
+
+       OBJECT             radiusDynAuthClientAddressType
+       SYNTAX             InetAddressType { ipv4(1), ipv6(2) }
+       DESCRIPTION
+           "An implementation is only required to support IPv4 and
+            globally unique IPv6 addresses."
+
+       OBJECT             radiusDynAuthClientAddress
+       SYNTAX             InetAddress (SIZE(4|16))
+       DESCRIPTION
+           "An implementation is only required to support IPv4 and
+            globally unique IPv6 addresses."
+
+       GROUP              radiusDynAuthServerAuthOnlyGroup
+       DESCRIPTION
+             "Only required for Dynamic Authorization Clients that
+              are supporting Service-Type attributes with value
+              'Authorize-Only'."
+
+       GROUP              radiusDynAuthServerNoSessGroup
+       DESCRIPTION
+             "This group is not required if the Dynamic
+              Authorization Server cannot easily determine whether
+              a session exists (e.g., in case of a RADIUS
+              proxy)."
+       ::= { radiusDynAuthServerMIBCompliances 1 }
+
+-- units of conformance
+
+radiusDynAuthServerMIBGroup OBJECT-GROUP
+       OBJECTS { radiusDynAuthServerDisconInvalidClientAddresses,
+                 radiusDynAuthServerCoAInvalidClientAddresses,
+                 radiusDynAuthServerIdentifier,
+                 radiusDynAuthClientAddressType,
+                 radiusDynAuthClientAddress,
+                 radiusDynAuthServDisconRequests,
+                 radiusDynAuthServDupDisconRequests,
+                 radiusDynAuthServDisconAcks,
+                 radiusDynAuthServDisconNaks,
+                 radiusDynAuthServDisconUserSessRemoved,
+                 radiusDynAuthServMalformedDisconRequests,
+                 radiusDynAuthServDisconBadAuthenticators,
+                 radiusDynAuthServDisconPacketsDropped,
+                 radiusDynAuthServCoARequests,
+                 radiusDynAuthServDupCoARequests,
+                 radiusDynAuthServCoAAcks,
+                 radiusDynAuthServCoANaks,
+                 radiusDynAuthServCoAUserSessChanged,
+                 radiusDynAuthServMalformedCoARequests,
+                 radiusDynAuthServCoABadAuthenticators,
+                 radiusDynAuthServCoAPacketsDropped,
+                 radiusDynAuthServUnknownTypes,
+                 radiusDynAuthServerCounterDiscontinuity
+               }
+       STATUS  current
+       DESCRIPTION
+             "The collection of objects providing management of
+              a RADIUS Dynamic Authorization Server."
+       ::= { radiusDynAuthServerMIBGroups 1 }
+
+radiusDynAuthServerAuthOnlyGroup OBJECT-GROUP
+       OBJECTS { radiusDynAuthServDisconAuthOnlyRequests,
+                 radiusDynAuthServDisconNakAuthOnlyRequests,
+                 radiusDynAuthServCoAAuthOnlyRequests,
+                 radiusDynAuthServCoANakAuthOnlyRequests
+               }
+       STATUS  current
+       DESCRIPTION
+             "The collection of objects supporting the RADIUS
+              messages including Service-Type attribute with
+              value 'Authorize Only'."
+       ::= { radiusDynAuthServerMIBGroups 2 }
+
+radiusDynAuthServerNoSessGroup OBJECT-GROUP
+       OBJECTS { radiusDynAuthServDisconNakSessNoContext,
+                 radiusDynAuthServCoANakSessNoContext
+               }
+       STATUS  current
+       DESCRIPTION
+             "The collection of objects supporting the RADIUS
+              messages that are referring to non-existing sessions."
+       ::= { radiusDynAuthServerMIBGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/RAQMON-MIB.mib b/snmp_builder/mibs/RAQMON-MIB.mib
new file mode 100644
index 0000000..7ccf0a1
--- /dev/null
+++ b/snmp_builder/mibs/RAQMON-MIB.mib
@@ -0,0 +1,1417 @@
+RAQMON-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
+            FROM SNMPv2-CONF
+        Integer32, Unsigned32,
+        Gauge32, Counter32, OBJECT-TYPE,
+        MODULE-IDENTITY, NOTIFICATION-TYPE
+            FROM SNMPv2-SMI
+        InetAddressType, InetAddress, InetPortNumber
+            FROM INET-ADDRESS-MIB
+                 SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+        rmon
+            FROM RMON-MIB
+        RowStatus, TruthValue, DateAndTime, RowPointer
+            FROM SNMPv2-TC;
+
+    raqmonMIB MODULE-IDENTITY
+        LAST-UPDATED "200610100000Z"     -- October 10, 2006
+        ORGANIZATION
+            "IETF RMON MIB Working Group"
+        CONTACT-INFO
+            "WG Charter:
+             http://www.ietf.org/html.charters/rmonmib-charter.html
+
+             Mailing lists:
+                 General Discussion: rmonmib@ietf.org
+                 To Subscribe: rmonmib-requests@ietf.org
+                 In Body: subscribe your_email_address
+
+             Chair: Andy Bierman
+                    Email: ietf@andybierman.com
+
+             Editor: Dan Romascanu
+                     Avaya
+                     Email:  dromasca@avaya.com"
+        DESCRIPTION
+            "Real-Time Application QoS Monitoring MIB.
+
+             Copyright (c) The Internet Society (2006).
+             This version of this MIB module is part of
+             RFC 4711; See the RFC itself for full legal notices."
+        REVISION    "200610100000Z"
+        DESCRIPTION
+            "Initial version, published as RFC 4711."
+        ::= { rmon 31 }
+-- This OID allocation conforms to [RFC3737]
+
+--
+-- Node definitions
+--
+    raqmonNotifications OBJECT IDENTIFIER ::= { raqmonMIB 0 }
+
+    raqmonSessionAlarm NOTIFICATION-TYPE
+        OBJECTS { raqmonParticipantAddr,
+            raqmonParticipantName,
+            raqmonParticipantPeerAddrType,
+            raqmonParticipantPeerAddr,
+            raqmonQoSEnd2EndNetDelay,
+            raqmonQoSInterArrivalJitter,
+            raqmonQosLostPackets,
+            raqmonQosRcvdPackets }
+        STATUS current
+        DESCRIPTION
+            "A notification generated by an entry in the
+             raqmonSessionExceptionTable."
+        ::= { raqmonNotifications 1 }
+
+    raqmonMIBObjects OBJECT IDENTIFIER ::= { raqmonMIB 1 }
+
+    raqmonSession OBJECT IDENTIFIER ::= { raqmonMIBObjects 1 }
+
+    raqmonParticipantTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF RaqmonParticipantEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "This table contains information about participants in
+             both active and closed (terminated) sessions."
+        ::= { raqmonSession 1 }
+
+    raqmonParticipantEntry OBJECT-TYPE
+        SYNTAX RaqmonParticipantEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each row contains information for a single session
+             (application) run by one participant.
+             Indexation by the start time of the session aims
+             to ease sorting by management applications.  Agents MUST
+             NOT report identical start times for any two sessions
+             on the same host.
+             Rows are removed for inactive sessions
+             when implementation-specific age or space limits are
+             reached."
+        INDEX { raqmonParticipantStartDate, raqmonParticipantIndex }
+        ::= { raqmonParticipantTable 1 }
+
+    RaqmonParticipantEntry ::=
+        SEQUENCE {
+            raqmonParticipantStartDate     DateAndTime,
+            raqmonParticipantIndex         Unsigned32,
+            raqmonParticipantReportCaps    BITS,
+            raqmonParticipantAddrType      InetAddressType,
+            raqmonParticipantAddr          InetAddress,
+            raqmonParticipantSendPort      InetPortNumber,
+            raqmonParticipantRecvPort      InetPortNumber,
+            raqmonParticipantSetupDelay    Integer32,
+            raqmonParticipantName          SnmpAdminString,
+            raqmonParticipantAppName       SnmpAdminString,
+            raqmonParticipantQosCount      Gauge32,
+            raqmonParticipantEndDate       DateAndTime,
+            raqmonParticipantDestPayloadType  Integer32,
+            raqmonParticipantSrcPayloadType   Integer32,
+            raqmonParticipantActive        TruthValue,
+            raqmonParticipantPeer          RowPointer,
+            raqmonParticipantPeerAddrType  InetAddressType,
+            raqmonParticipantPeerAddr      InetAddress,
+            raqmonParticipantSrcL2Priority     Integer32,
+            raqmonParticipantDestL2Priority    Integer32,
+            raqmonParticipantSrcDSCP       Integer32,
+            raqmonParticipantDestDSCP      Integer32,
+            raqmonParticipantCpuMean       Integer32,
+            raqmonParticipantCpuMin        Integer32,
+            raqmonParticipantCpuMax        Integer32,
+            raqmonParticipantMemoryMean    Integer32,
+            raqmonParticipantMemoryMin     Integer32,
+            raqmonParticipantMemoryMax     Integer32,
+            raqmonParticipantNetRTTMean    Integer32,
+            raqmonParticipantNetRTTMin     Integer32,
+            raqmonParticipantNetRTTMax     Integer32,
+            raqmonParticipantIAJitterMean  Integer32,
+            raqmonParticipantIAJitterMin   Integer32,
+            raqmonParticipantIAJitterMax   Integer32,
+            raqmonParticipantIPDVMean      Integer32,
+            raqmonParticipantIPDVMin       Integer32,
+            raqmonParticipantIPDVMax       Integer32,
+            raqmonParticipantNetOwdMean    Integer32,
+            raqmonParticipantNetOwdMin     Integer32,
+            raqmonParticipantNetOwdMax     Integer32,
+            raqmonParticipantAppDelayMean  Integer32,
+            raqmonParticipantAppDelayMin   Integer32,
+            raqmonParticipantAppDelayMax   Integer32,
+            raqmonParticipantPacketsRcvd   Integer32,
+            raqmonParticipantPacketsSent   Integer32,
+            raqmonParticipantOctetsRcvd    Integer32,
+            raqmonParticipantOctetsSent    Integer32,
+            raqmonParticipantLostPackets   Integer32,
+            raqmonParticipantLostPacketsFrct  Integer32,
+            raqmonParticipantDiscards      Integer32,
+            raqmonParticipantDiscardsFrct  Integer32
+         }
+
+    raqmonParticipantStartDate OBJECT-TYPE
+        SYNTAX DateAndTime
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The date and time of this entry.
+             It will be the date and time
+             of the first report received."
+        ::= { raqmonParticipantEntry 1 }
+
+    raqmonParticipantIndex OBJECT-TYPE
+        SYNTAX Unsigned32 (1..2147483647)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "The index of the conceptual row, which is for SNMP
+             purposes only and has no relation to any protocol value.
+
+             There is no requirement that these rows be created or
+             maintained sequentially.  The index will be unique for a
+             particular date and time."
+        ::= { raqmonParticipantEntry 2 }
+
+    raqmonParticipantReportCaps   OBJECT-TYPE
+        SYNTAX      BITS {
+            raqmonPartRepDsrcName(0),
+            raqmonPartRepRecvName(1),
+            raqmonPartRepDsrcPort(2),
+            raqmonPartRepRecvPort(3),
+            raqmonPartRepSetupTime(4),
+            raqmonPartRepSetupDelay(5),
+            raqmonPartRepSessionDuration(6),
+            raqmonPartRepSetupStatus(7),
+            raqmonPartRepRTEnd2EndNetDelay(8),
+            raqmonPartRepOWEnd2EndNetDelay(9),
+            raqmonPartApplicationDelay(10),
+            raqmonPartRepIAJitter(11),
+            raqmonPartRepIPDV(12),
+            raqmonPartRepRcvdPackets(13),
+            raqmonPartRepRcvdOctets(14),
+            raqmonPartRepSentPackets(15),
+            raqmonPartRepSentOctets(16),
+            raqmonPartRepCumPacketsLoss(17),
+            raqmonPartRepFractionPacketsLoss(18),
+            raqmonPartRepCumDiscards(19),
+            raqmonPartRepFractionDiscards(20),
+            raqmonPartRepSrcPayloadType(21),
+            raqmonPartRepDestPayloadType(22),
+            raqmonPartRepSrcLayer2Priority(23),
+            raqmonPartRepSrcTosDscp(24),
+            raqmonPartRepDestLayer2Priority(25),
+            raqmonPartRepDestTosDscp(26),
+            raqmonPartRepCPU(27),
+            raqmonPartRepMemory(28),
+            raqmonPartRepAppName(29)
+            }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The Report capabilities of the participant, as perceived
+             by the Collector.
+
+             If the participant can report the Data Source Name as
+             defined in [RFC4710], Section 5.3, then the
+             raqmonPartRepDsrcName bit will be set.
+
+             If the participant can report the Receiver Name as
+             defined in [RFC4710], Section 5.4, then the
+             raqmonPartRepRecvName bit will be set.
+
+             If the participant can report the Data Source Port as
+             defined in [RFC4710], Section 5.5, then the
+             raqmonPartRepDsrcPort bit will be set.
+
+             If the participant can report the Receiver Port as
+             defined in [RFC4710], Section 5.6, then the
+             raqmonPartRepRecvPort bit will be set.
+
+             If the participant can report the Session Setup Time as
+             defined in [RFC4710], Section 5.7, then the
+             raqmonPartRepSetupTime bit will be set.
+
+             If the participant can report the Session Setup Delay as
+             defined in [RFC4710], Section 5.8, then the
+             raqmonPartRepSetupDelay bit will be set.
+
+             If the participant can report the Session Duration as
+             defined in [RFC4710], Section 5.9, then the
+             raqmonPartRepSessionDuration bit will be set.
+
+             If the participant can report the Setup Status as
+             defined in [RFC4710], Section 5.10, then the
+             raqmonPartRepSetupStatus bit will be set.
+
+             If the participant can report the Round-Trip End-to-end
+             Network Delay as defined in [RFC4710], Section 5.11,
+             then the raqmonPartRepRTEnd2EndNetDelay bit will be set.
+
+             If the participant can report the One-way End-to-end
+             Network Delay as defined in [RFC4710], Section 5.12,
+             then the raqmonPartRepOWEnd2EndNetDelay bit will be set.
+
+             If the participant can report the Application Delay as
+             defined in [RFC4710], Section 5.13, then the
+             raqmonPartApplicationDelay bit will be set.
+
+             If the participant can report the Inter-Arrival Jitter
+             as defined in [RFC4710], Section 5.14, then the
+             raqmonPartRepIAJitter bit will be set.
+
+             If the participant can report the IP Packet Delay
+             Variation as defined in [RFC4710], Section 5.15, then
+             the raqmonPartRepIPDV bit will be set.
+
+             If the participant can report the number of application
+             packets received as defined in [RFC4710], Section 5.16,
+             then the raqmonPartRepRcvdPackets bit will be set.
+
+             If the participant can report the number of application
+             octets received as defined in [RFC4710], Section 5.17,
+             then the raqmonPartRepRcvdOctets bit will be set.
+
+             If the participant can report the number of application
+             packets sent as defined in [RFC4710], Section 5.18, then
+             the raqmonPartRepSentPackets bit will be set.
+
+             If the participant can report the number of application
+             octets sent as defined in [RFC4710], Section 5.19, then
+             the raqmonPartRepSentOctets bit will be set.
+
+             If the participant can report the number of cumulative
+             packets lost as defined in [RFC4710], Section 5.20, then
+             the raqmonPartRepCumPacketsLoss bit will be set.
+
+             If the participant can report the fraction of packet
+             loss as defined in [RFC4710], Section 5.21, then the
+             raqmonPartRepFractionPacketsLoss bit will be set.
+
+             If the participant can report the number of cumulative
+             discards as defined in [RFC4710], Section 5.22, then the
+             raqmonPartRepCumDiscards bit will be set.
+
+             If the participant can report the fraction of discards
+             as defined in [RFC4710], Section 5.23, then the
+             raqmonPartRepFractionDiscards bit will be set.
+
+             If the participant can report the Source Payload Type as
+             defined in [RFC4710], Section 5.24, then the
+             raqmonPartRepSrcPayloadType bit will be set.
+
+             If the participant can report the Destination Payload
+             Type as defined in [RFC4710], Section 5.25, then the
+             raqmonPartRepDestPayloadType bit will be set.
+
+             If the participant can report the Source Layer 2
+             Priority as defined in [RFC4710], Section 5.26, then the
+             raqmonPartRepSrcLayer2Priority bit will be set.
+
+             If the participant can report the Source DSCP/ToS value
+             as defined in [RFC4710], Section 5.27, then the
+             raqmonPartRepSrcToSDscp bit will be set.
+
+             If the participant can report the Destination Layer 2
+             Priority as defined in [RFC4710], Section 5.28, then the
+             raqmonPartRepDestLayer2Priority bit will be set.
+
+             If the participant can report the Destination DSCP/ToS
+             Value as defined in [RFC4710], Section 5.29, then the
+             raqmonPartRepDestToSDscp bit will be set.
+
+             If the participant can report the CPU utilization as
+             defined in [RFC4710], Section 5.30, then the
+             raqmonPartRepCPU bit will be set.
+
+             If the participant can report the memory utilization as
+             defined in [RFC4710], Section 5.31, then the
+             raqmonPartRepMemory bit will be set.
+
+             If the participant can report the Application Name as
+             defined in [RFC4710], Section 5.32, then the
+             raqmonPartRepAppName bit will be set.
+
+             The capability of reporting of a specific metric does
+             not mandate that the metric must be reported permanently
+             by the data source to the respective collector.  Some
+             data sources MAY be configured not to send a metric, or
+             some metrics may not be relevant to the specific
+             application."
+        ::= { raqmonParticipantEntry 3 }
+
+    raqmonParticipantAddrType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The type of the Internet address of the participant for
+             this session."
+        ::= { raqmonParticipantEntry 4 }
+
+   raqmonParticipantAddr OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The Internet Address of the participant for this
+             session.  Formatting of this object is determined
+             by the value of raqmonParticipantAddrType."
+        ::= { raqmonParticipantEntry 5 }
+
+   raqmonParticipantSendPort OBJECT-TYPE
+        SYNTAX InetPortNumber
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Port from which session data is sent.
+             If the value was not reported to the collector,
+             this object will have the value 0."
+        REFERENCE
+            "Section 5.5 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 6 }
+
+    raqmonParticipantRecvPort OBJECT-TYPE
+        SYNTAX InetPortNumber
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Port on which session data is received.
+             If the value was not reported to the collector,
+             this object will have the value 0."
+        REFERENCE
+            "Section 5.6 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 7 }
+
+    raqmonParticipantSetupDelay OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Session setup time.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.8 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 8 }
+
+    raqmonParticipantName OBJECT-TYPE
+        SYNTAX SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The data source name for the participant."
+        REFERENCE
+            "Section 5.3 of the [RFC4710]"
+       ::= { raqmonParticipantEntry 9 }
+
+    raqmonParticipantAppName OBJECT-TYPE
+        SYNTAX SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "A string giving the name and possibly the version
+             of the application generating the stream, e.g.,
+             'videotool 1.2.'
+
+             This information may be useful for debugging purposes
+             and is similar to the Mailer or Mail-System-Version SMTP
+             headers.  The tool value is expected to remain constant
+             for the duration of the session."
+        REFERENCE
+            "Section 5.32 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 10 }
+
+    raqmonParticipantQosCount OBJECT-TYPE
+        SYNTAX Gauge32
+        UNITS  "entries"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The current number of entries in the raqmonQosTable
+             for this participant and session."
+        ::= { raqmonParticipantEntry 11 }
+
+    raqmonParticipantEndDate OBJECT-TYPE
+        SYNTAX DateAndTime
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The date and time of the most recent report received."
+        ::= { raqmonParticipantEntry 12 }
+
+    raqmonParticipantDestPayloadType OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..127)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Destination Payload Type.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "RFC 3551 and Section 5.25 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 13 }
+
+    raqmonParticipantSrcPayloadType OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..127)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Source Payload Type.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "RFC 3551 and Section 5.24 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 14 }
+
+    raqmonParticipantActive OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Value 'true' indicates that the session
+             for this participant is active (open).
+             Value 'false' indicates that the session
+             is closed (terminated)."
+        ::= { raqmonParticipantEntry 15 }
+
+    raqmonParticipantPeer OBJECT-TYPE
+        SYNTAX RowPointer
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The pointer to the corresponding entry in this table for
+             the other peer participant.  If there is no such entry
+             in the participant table of the collector represented by
+             this SNMP agent, then the value will be { 0 0 }.
+            "
+        ::= { raqmonParticipantEntry 16 }
+
+    raqmonParticipantPeerAddrType OBJECT-TYPE
+        SYNTAX InetAddressType
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The type of the Internet address of the peer participant
+             for this session."
+        ::= { raqmonParticipantEntry 17 }
+
+   raqmonParticipantPeerAddr OBJECT-TYPE
+        SYNTAX InetAddress
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The Internet Address of the peer participant for this
+             session.  Formatting of this object is determined by
+             the value of raqmonParticipantPeerAddrType."
+        ::= { raqmonParticipantEntry 18 }
+
+   raqmonParticipantSrcL2Priority OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..7)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Source Layer 2 Priority.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.26 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 19 }
+
+    raqmonParticipantDestL2Priority OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..7)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Destination Layer 2 Priority.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.28 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 20 }
+
+    raqmonParticipantSrcDSCP OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..63)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Source Layer 3 DSCP value.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.27 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 21 }
+
+    raqmonParticipantDestDSCP OBJECT-TYPE
+        SYNTAX Integer32  (-1|0..63)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Destination Layer 3 DSCP value."
+        REFERENCE
+            "Section 5.29 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 22 }
+
+    raqmonParticipantCpuMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean CPU utilization.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.30 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 23 }
+
+    raqmonParticipantCpuMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum CPU utilization.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.30 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 24 }
+
+    raqmonParticipantCpuMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum CPU utilization.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.30 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 25 }
+
+    raqmonParticipantMemoryMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean memory utilization.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.31 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 26 }
+
+    raqmonParticipantMemoryMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum memory utilization.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.31 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 27 }
+
+    raqmonParticipantMemoryMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum memory utilization.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.31 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 28 }
+
+    raqmonParticipantNetRTTMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean round-trip end-to-end network
+             delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.11 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 29 }
+
+    raqmonParticipantNetRTTMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum round-trip end-to-end network delay
+             over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.11 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 30 }
+
+    raqmonParticipantNetRTTMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum round-trip end-to-end network delay
+             over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.11 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 31 }
+
+    raqmonParticipantIAJitterMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean inter-arrival jitter over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.14 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 32 }
+
+    raqmonParticipantIAJitterMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum inter-arrival jitter over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.14 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 33 }
+
+    raqmonParticipantIAJitterMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum inter-arrival jitter over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.14 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 34 }
+
+    raqmonParticipantIPDVMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean IP packet delay variation over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.15 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 35 }
+
+    raqmonParticipantIPDVMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum IP packet delay variation over the entire
+             session.  If the value was not reported to the
+             collector, this object will have the value -1."
+        REFERENCE
+            "Section 5.15 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 36 }
+
+    raqmonParticipantIPDVMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum IP packet delay variation over the entire
+             session.  If the value was not reported to the
+             collector, this object will have the value -1."
+        REFERENCE
+            "Section 5.15 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 37 }
+
+    raqmonParticipantNetOwdMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean Network one-way delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.12 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 38 }
+
+    raqmonParticipantNetOwdMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum Network one-way delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.12 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 39 }
+
+    raqmonParticipantNetOwdMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum Network one-way delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.1 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 40 }
+
+    raqmonParticipantAppDelayMean OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Mean application delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.13 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 41 }
+
+    raqmonParticipantAppDelayMin OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Minimum application delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.13 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 42 }
+
+    raqmonParticipantAppDelayMax OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Maximum application delay over the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.13 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 43 }
+
+    raqmonParticipantPacketsRcvd OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of packets received for the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.16 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 44 }
+
+    raqmonParticipantPacketsSent OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of packets sent for the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.17 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 45 }
+
+    raqmonParticipantOctetsRcvd OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "Octets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of octets received for the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.18 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 46 }
+
+    raqmonParticipantOctetsSent OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "Octets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of octets sent for the entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.19 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 47 }
+
+    raqmonParticipantLostPackets OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of packets lost by this receiver for the entire
+             session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.20 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 48 }
+
+    raqmonParticipantLostPacketsFrct OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Fraction of lost packets out of total packets received.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.21 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 49 }
+
+    raqmonParticipantDiscards OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of packets discarded by this receiver for the
+             entire session.
+             If the value was not reported to the collector,
+             this object will have the value -1."
+        REFERENCE
+            "Section 5.22 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 50 }
+
+    raqmonParticipantDiscardsFrct OBJECT-TYPE
+        SYNTAX Integer32 (-1|0..100)
+        UNITS  "percents"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Fraction of discarded packets out of total packets
+             received.  If the value was not reported to the
+             collector, this object will have the value -1."
+        REFERENCE
+            "Section 5.23 of the [RFC4710]"
+        ::= { raqmonParticipantEntry 51 }
+
+ raqmonQosTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF RaqmonQosEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Table of historical information about quality-of-service
+             data during sessions."
+        ::= { raqmonSession 2 }
+
+    raqmonQosEntry OBJECT-TYPE
+        SYNTAX RaqmonQosEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry contains information from a single RAQMON
+             packet, related to a single session
+             (application) run by one participant.
+             Indexation by the start time of the session aims
+             to ease sorting by management applications.  Agents MUST
+             NOT report identical start times for any two sessions
+
+             on the same host.
+             Rows are removed for inactive sessions when
+             implementation-specific time or space limits are
+             reached."
+        INDEX { raqmonParticipantStartDate,
+                raqmonParticipantIndex,
+                raqmonQosTime }
+        ::= { raqmonQosTable 1 }
+
+    RaqmonQosEntry ::=
+        SEQUENCE {
+            raqmonQosTime          Unsigned32,
+            raqmonQoSEnd2EndNetDelay           Integer32,
+            raqmonQoSInterArrivalJitter        Integer32,
+            raqmonQosRcvdPackets   Integer32,
+            raqmonQosRcvdOctets    Integer32,
+            raqmonQosSentPackets   Integer32,
+            raqmonQosSentOctets    Integer32,
+            raqmonQosLostPackets   Integer32,
+            raqmonQosSessionStatus SnmpAdminString
+            }
+
+    raqmonQosTime OBJECT-TYPE
+        SYNTAX Unsigned32 (0..2147483647)
+        UNITS  "seconds"
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Time of this entry measured from the start of the
+             corresponding participant session."
+        ::= { raqmonQosEntry 1 }
+
+    raqmonQoSEnd2EndNetDelay OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The round-trip time.
+             Will contain the previous value if there was no report
+             for this time, or -1 if the value has never
+             been reported."
+        REFERENCE
+            "Section 5.11 of the [RFC4710]"
+        ::= { raqmonQosEntry 2 }
+
+    raqmonQoSInterArrivalJitter OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "milliseconds"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "An estimate of delay variation as observed by this
+             receiver.  Will contain the previous value if there
+             was no report for this time, or -1 if the value
+             has never been reported."
+        REFERENCE
+            "Section 5.14 of the [RFC4710]"
+        ::= { raqmonQosEntry 3 }
+
+    raqmonQosRcvdPackets OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of packets received by this receiver since the
+             previous entry.  Will contain the previous value if
+             there was no report for this time, or -1 if the value
+             has never been reported."
+        REFERENCE
+            "Section 5.16 of the [RFC4710]"
+    ::= { raqmonQosEntry 4 }
+
+    raqmonQosRcvdOctets OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "octets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of octets received by this receiver since the
+             previous report.  Will contain the previous value if
+             there was no report for this time, or -1 if the value
+             has never been reported."
+            REFERENCE
+                  "Section 5.18 of the [RFC4710]"
+        ::= { raqmonQosEntry 5 }
+
+    raqmonQosSentPackets OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of packets sent since the previous report.
+             Will contain the previous value if there
+
+             was no report for this time, or -1 if the value
+             has never been reported."
+       REFERENCE
+           "Section 5.17 of the [RFC4710]"
+    ::= { raqmonQosEntry 6 }
+
+    raqmonQosSentOctets OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "octets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of octets sent since the previous report.
+             Will contain the previous value if there
+             was no report for this time, or -1 if the value
+             has never been reported."
+        REFERENCE
+            "Section 5.19 of the [RFC4710]"
+        ::= { raqmonQosEntry 7 }
+
+    raqmonQosLostPackets OBJECT-TYPE
+        SYNTAX Integer32 (-1 | 0..2147483647)
+        UNITS  "packets"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "A count of packets lost as observed by this receiver
+             since the previous report.  Will contain the previous
+             value if there was no report for this time, or -1 if
+             the value has never been reported."
+        REFERENCE
+            "Section 5.20 of the [RFC4710]"
+    ::= { raqmonQosEntry 8 }
+
+    raqmonQosSessionStatus OBJECT-TYPE
+        SYNTAX SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The session status.  Will contain the previous value
+             if there was no report for this time or the zero-length
+             string if no value was ever reported."
+        REFERENCE
+            "Section 5.10 of the [RFC4710]"
+        ::= { raqmonQosEntry 9 }
+
+    raqmonParticipantAddrTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF RaqmonParticipantAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Maps raqmonParticipantAddr to the index of the
+             raqmonParticipantTable.  This table allows
+             management applications to find entries
+             sorted by raqmonParticipantAddr rather than
+             raqmonParticipantStartDate."
+        ::= { raqmonSession 3 }
+
+    raqmonParticipantAddrEntry OBJECT-TYPE
+        SYNTAX RaqmonParticipantAddrEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "Each entry corresponds to exactly one entry in the
+             raqmonParticipantEntry: the entry containing the
+             index pair raqmonParticipantStartDate,
+             raqmonParticipantIndex.
+
+             Note that there is no concern about the indexation of
+             this table exceeding the limits defined by RFC 2578,
+             Section 3.5.  According to [RFC4710], Section
+             5.1, only IPv4 and IPv6 addresses can be reported as
+             participant addresses."
+        INDEX { raqmonParticipantAddrType,
+                raqmonParticipantAddr,
+                raqmonParticipantStartDate,
+                raqmonParticipantIndex }
+        ::= { raqmonParticipantAddrTable 1 }
+
+    RaqmonParticipantAddrEntry ::=
+        SEQUENCE { raqmonParticipantAddrEndDate DateAndTime }
+
+    raqmonParticipantAddrEndDate OBJECT-TYPE
+        SYNTAX DateAndTime
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The value of raqmonParticipantEndDate for the
+             corresponding raqmonParticipantEntry."
+        ::= { raqmonParticipantAddrEntry 1 }
+
+    raqmonException OBJECT IDENTIFIER ::= { raqmonMIBObjects 2 }
+
+    raqmonSessionExceptionTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF RaqmonSessionExceptionEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "This table defines thresholds for the management
+             station to get notifications about sessions that
+             encountered poor quality of service.
+
+             The information in this table MUST be persistent
+             across agent reboots."
+        ::= { raqmonException 2 }
+
+    raqmonSessionExceptionEntry OBJECT-TYPE
+        SYNTAX RaqmonSessionExceptionEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "A conceptual row in the raqmonSessionExceptionTable."
+        INDEX { raqmonSessionExceptionIndex }
+        ::= { raqmonSessionExceptionTable 1 }
+
+    RaqmonSessionExceptionEntry ::=
+        SEQUENCE {
+            raqmonSessionExceptionIndex                Unsigned32,
+            raqmonSessionExceptionIAJitterThreshold    Unsigned32,
+            raqmonSessionExceptionNetRTTThreshold      Unsigned32,
+            raqmonSessionExceptionLostPacketsThreshold Unsigned32,
+            raqmonSessionExceptionRowStatus            RowStatus
+            }
+
+    raqmonSessionExceptionIndex OBJECT-TYPE
+        SYNTAX Unsigned32 (1..65535)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+            "An index that uniquely identifies an
+             entry in the raqmonSessionExceptionTable.
+             Management applications can determine unused indices
+             by performing GetNext or GetBulk operations on the
+             Table."
+        ::= { raqmonSessionExceptionEntry 2 }
+
+    raqmonSessionExceptionIAJitterThreshold OBJECT-TYPE
+        SYNTAX Unsigned32
+        UNITS  "milliseconds"
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Threshold for jitter.
+             The value during a session must be greater than or
+             equal to this value for an exception to be created."
+        ::= { raqmonSessionExceptionEntry 3 }
+
+    raqmonSessionExceptionNetRTTThreshold OBJECT-TYPE
+        SYNTAX Unsigned32
+        UNITS  "milliseconds"
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Threshold for round-trip time.
+             The value during a session must be greater than or
+             equal to this value for an exception to be created."
+        ::= { raqmonSessionExceptionEntry 4 }
+
+    raqmonSessionExceptionLostPacketsThreshold OBJECT-TYPE
+        SYNTAX Unsigned32 (0..1000)
+        UNITS  "tenth of a percent"
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "Threshold for lost packets in units of tenths
+             of a percent.  The value during a session must
+             be greater than or equal to this value for an
+             exception to be created."
+        ::= { raqmonSessionExceptionEntry 5 }
+
+    raqmonSessionExceptionRowStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+            "This object has a value of 'active' when
+             exceptions are being monitored by the system.
+             A newly-created conceptual row must have all
+             the read-create objects initialized before
+             becoming 'active'.  A conceptual row that is in
+             the 'notReady' or 'notInService' state MAY be
+             removed after 5 minutes.  No writeable objects
+             can be changed while the row is active."
+        ::= { raqmonSessionExceptionEntry 7 }
+
+    raqmonConfig OBJECT IDENTIFIER ::= { raqmonMIBObjects 3 }
+
+    raqmonConfigPort OBJECT-TYPE
+        SYNTAX InetPortNumber
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The UDP port to listen on for RAQMON reports,
+             running on transport protocols other than SNMP.
+             If the RAQMON PDU transport protocol is SNMP,
+             a write operation on this object has no effect, as
+             the standard port 162 is always used.
+             The value of this object MUST be persistent across
+             agent reboots."
+        ::= { raqmonConfig 1 }
+
+       raqmonConfigPduTransport OBJECT-TYPE
+         SYNTAX BITS
+            {
+                other(0),
+                tcp(1),
+                snmp(2)
+            }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "The PDU transport(s) used by this collector.
+             If other(0) is set, the collector supports a
+             transport other than SNMP or TCP.
+             If tcp(1) is set, the collector supports TCP as a
+             transport protocol.
+             If snmp(2) is set, the collector supports SNMP as a
+             transport protocol."
+        ::= { raqmonConfig 2 }
+
+    raqmonConfigRaqmonPdus OBJECT-TYPE
+        SYNTAX Counter32
+        UNITS  "PDUs"
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "Count of RAQMON PDUs received by the Collector."
+        ::= { raqmonConfig 3 }
+
+    raqmonConfigRDSTimeout OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+            "The number of seconds since the reception of the
+             last RAQMON PDU from a RDS after which a session
+
+             between the respective RDS and the collector will be
+             considered terminated.
+             The value of this object MUST be persistent across
+             agent reboots."
+        ::= { raqmonConfig 4 }
+
+    raqmonConformance OBJECT IDENTIFIER ::= { raqmonMIB 2 }
+
+    raqmonCompliances OBJECT IDENTIFIER ::= { raqmonConformance 1 }
+    raqmonGroups OBJECT IDENTIFIER ::= { raqmonConformance 2 }
+
+    raqmonCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "Describes the requirements for conformance to the
+             RAQMON MIB."
+        MODULE  -- this module
+        MANDATORY-GROUPS { raqmonCollectorGroup,
+                           raqmonCollectorNotificationsGroup
+                         }
+
+        OBJECT raqmonParticipantAddrType
+        SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "Only IPv4 and IPv6 addresses need to be supported."
+
+        OBJECT raqmonParticipantAddr
+        SYNTAX  InetAddress (SIZE(4|16))
+        DESCRIPTION
+            "Only IPv4 and IPv6 addresses need to be supported."
+
+        OBJECT raqmonParticipantPeerAddrType
+        SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
+        DESCRIPTION
+            "Only IPv4 and IPv6 addresses need to be supported."
+
+        OBJECT raqmonParticipantPeerAddr
+        SYNTAX  InetAddress (SIZE(4|16))
+        DESCRIPTION
+            "Only IPv4 and IPv6 addresses need to be supported."
+           ::= { raqmonCompliances 1 }
+
+    raqmonCollectorGroup OBJECT-GROUP
+        OBJECTS {
+            raqmonParticipantReportCaps,
+            raqmonParticipantAddrType,
+            raqmonParticipantAddr,
+            raqmonParticipantSendPort,
+            raqmonParticipantRecvPort,
+            raqmonParticipantSetupDelay,
+            raqmonParticipantName,
+            raqmonParticipantAppName,
+            raqmonParticipantQosCount,
+            raqmonParticipantEndDate,
+            raqmonParticipantDestPayloadType,
+            raqmonParticipantSrcPayloadType,
+            raqmonParticipantActive,
+            raqmonParticipantPeer,
+            raqmonParticipantPeerAddrType,
+            raqmonParticipantPeerAddr,
+            raqmonParticipantSrcL2Priority,
+            raqmonParticipantDestL2Priority,
+            raqmonParticipantSrcDSCP,
+            raqmonParticipantDestDSCP,
+            raqmonParticipantCpuMean,
+            raqmonParticipantCpuMin,
+            raqmonParticipantCpuMax,
+            raqmonParticipantMemoryMean,
+            raqmonParticipantMemoryMin,
+            raqmonParticipantMemoryMax,
+            raqmonParticipantNetRTTMean,
+            raqmonParticipantNetRTTMin,
+            raqmonParticipantNetRTTMax,
+            raqmonParticipantIAJitterMean,
+            raqmonParticipantIAJitterMin,
+            raqmonParticipantIAJitterMax,
+            raqmonParticipantIPDVMean,
+            raqmonParticipantIPDVMin,
+            raqmonParticipantIPDVMax,
+            raqmonParticipantNetOwdMean,
+            raqmonParticipantNetOwdMin,
+            raqmonParticipantNetOwdMax,
+            raqmonParticipantAppDelayMean,
+            raqmonParticipantAppDelayMin,
+            raqmonParticipantAppDelayMax,
+            raqmonParticipantPacketsRcvd,
+            raqmonParticipantPacketsSent,
+            raqmonParticipantOctetsRcvd,
+            raqmonParticipantOctetsSent,
+            raqmonParticipantLostPackets,
+            raqmonParticipantLostPacketsFrct,
+            raqmonParticipantDiscards,
+            raqmonParticipantDiscardsFrct,
+            raqmonQoSEnd2EndNetDelay,
+            raqmonQoSInterArrivalJitter,
+            raqmonQosRcvdPackets,
+            raqmonQosRcvdOctets,
+            raqmonQosSentPackets,
+            raqmonQosSentOctets,
+            raqmonQosLostPackets,
+            raqmonQosSessionStatus,
+            raqmonParticipantAddrEndDate,
+            raqmonConfigPort,
+            raqmonSessionExceptionIAJitterThreshold,
+            raqmonSessionExceptionNetRTTThreshold,
+            raqmonSessionExceptionLostPacketsThreshold,
+            raqmonSessionExceptionRowStatus,
+            raqmonConfigPduTransport,
+            raqmonConfigRaqmonPdus,
+            raqmonConfigRDSTimeout}
+        STATUS current
+        DESCRIPTION
+            "Objects used in RAQMON by a collector."
+        ::= { raqmonGroups 1 }
+
+    raqmonCollectorNotificationsGroup NOTIFICATION-GROUP
+        NOTIFICATIONS { raqmonSessionAlarm }
+        STATUS current
+        DESCRIPTION
+            "Notifications emitted by a RAQMON collector."
+        ::= { raqmonGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/RAQMON-RDS-MIB.mib b/snmp_builder/mibs/RAQMON-RDS-MIB.mib
new file mode 100644
index 0000000..0e254f9
--- /dev/null
+++ b/snmp_builder/mibs/RAQMON-RDS-MIB.mib
@@ -0,0 +1,672 @@
+RAQMON-RDS-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+       Counter32, Unsigned32
+           FROM SNMPv2-SMI
+
+       DateAndTime
+           FROM SNMPv2-TC
+
+       rmon
+           FROM RMON-MIB
+
+       SnmpAdminString
+           FROM SNMP-FRAMEWORK-MIB
+
+       InetAddressType, InetAddress, InetPortNumber
+           FROM INET-ADDRESS-MIB
+
+       Dscp
+           FROM DIFFSERV-DSCP-TC
+
+       MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+           FROM SNMPv2-CONF;
+
+   raqmonDsMIB MODULE-IDENTITY
+       LAST-UPDATED "200610100000Z"      -- October 10, 2006
+       ORGANIZATION "RMON Working Group"
+       CONTACT-INFO
+           "WG EMail: rmonmib@ietf.org
+            Subscribe: rmonmib-request@ietf.org
+
+            MIB Editor:
+            Eugene Golovinsky
+            Postal: BMC Software, Inc.
+                    2101 CityWest Boulevard,
+                    Houston, TX, 77094
+                    USA
+            Tel:    +713-918-1816
+            Email:  egolovin@bmc.com
+           "
+       DESCRIPTION
+           "This is the RAQMON Data Source notification MIB Module.
+            It provides a mapping of RAQMON PDUs to SNMP
+            notifications.
+
+            Ds stands for data source.
+
+            Note that all of the object types defined in this module
+            are accessible-for-notify and would consequently not be
+            available to a browser using simple Get, GetNext, or
+            GetBulk requests.
+
+            Copyright (c) The Internet Society (2006).
+
+            This version of this MIB module is part of RFC 4712;
+            See the RFC itself for full legal notices."
+
+       REVISION      "200610100000Z"     -- October 10, 2006
+       DESCRIPTION
+           "Initial version, published as RFC 4712."
+              ::= { rmon 32 }
+
+-- This OID allocation conforms to [RFC3737]
+
+   raqmonDsNotifications OBJECT IDENTIFIER ::= { raqmonDsMIB 0 }
+   raqmonDsMIBObjects OBJECT IDENTIFIER ::= { raqmonDsMIB 1 }
+   raqmonDsConformance OBJECT IDENTIFIER ::= { raqmonDsMIB 2 }
+
+   raqmonDsNotificationTable OBJECT-TYPE
+       SYNTAX SEQUENCE OF RaqmonDsNotificationEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+           "This conceptual table provides the SNMP mapping of
+            the RAQMON BASIC PDU.  It is indexed by the RAQMON
+            Data Source, sub-session, and address of the peer
+            entity.
+
+            Note that there is no concern about the indexation of
+            this table exceeding the limits defined by RFC 2578
+            Section 3.5.  According to [RFC4710], Section 5.1,
+            only IPv4 and IPv6 addresses can be reported as
+            participant addresses."
+       ::= { raqmonDsMIBObjects 1 }
+
+   raqmonDsNotificationEntry OBJECT-TYPE
+       SYNTAX     RaqmonDsNotificationEntry
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+           "The entry (row) is not retrievable and is not kept by
+            RDSs.  It serves data organization purposes only."
+       INDEX { raqmonDsDSRC, raqmonDsRCN, raqmonDsPeerAddrType,
+               raqmonDsPeerAddr }
+       ::= { raqmonDsNotificationTable 1 }
+
+   RaqmonDsNotificationEntry ::= SEQUENCE {
+           raqmonDsDSRC                      Unsigned32,
+           raqmonDsRCN                       Unsigned32,
+           raqmonDsPeerAddrType              InetAddressType,
+           raqmonDsPeerAddr                  InetAddress,
+           raqmonDsAppName                   SnmpAdminString,
+           raqmonDsDataSourceDevicePort      InetPortNumber,
+           raqmonDsReceiverDevicePort        InetPortNumber,
+           raqmonDsSessionSetupDateTime      DateAndTime,
+           raqmonDsSessionSetupDelay         Unsigned32,
+           raqmonDsSessionDuration           Unsigned32,
+           raqmonDsSessionSetupStatus        SnmpAdminString,
+           raqmonDsRoundTripEndToEndNetDelay Unsigned32,
+           raqmonDsOneWayEndToEndNetDelay    Unsigned32,
+           raqmonDsApplicationDelay          Unsigned32,
+           raqmonDsInterArrivalJitter        Unsigned32,
+           raqmonDsIPPacketDelayVariation    Unsigned32,
+           raqmonDsTotalPacketsReceived      Counter32,
+           raqmonDsTotalPacketsSent          Counter32,
+           raqmonDsTotalOctetsReceived       Counter32,
+           raqmonDsTotalOctetsSent           Counter32,
+           raqmonDsCumulativePacketLoss      Counter32,
+           raqmonDsPacketLossFraction        Unsigned32,
+           raqmonDsCumulativeDiscards        Counter32,
+           raqmonDsDiscardsFraction          Unsigned32,
+           raqmonDsSourcePayloadType         Unsigned32,
+           raqmonDsReceiverPayloadType       Unsigned32,
+           raqmonDsSourceLayer2Priority      Unsigned32,
+           raqmonDsSourceDscp                Dscp,
+           raqmonDsDestinationLayer2Priority Unsigned32,
+           raqmonDsDestinationDscp           Dscp,
+           raqmonDsCpuUtilization            Unsigned32,
+           raqmonDsMemoryUtilization         Unsigned32 }
+
+   raqmonDsDSRC OBJECT-TYPE
+       SYNTAX     Unsigned32
+       MAX-ACCESS not-accessible
+       STATUS     current
+       DESCRIPTION
+           "Data Source identifier represents a unique session
+            descriptor that points to a specific session
+            between communicating entities.  Identifiers unique for
+            sessions conducted between two entities are
+            generated by the communicating entities.  Zero is a
+            valid value, with no special semantics."
+       ::= { raqmonDsNotificationEntry 1 }
+
+   raqmonDsRCN OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..15)
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The Record Count Number indicates a sub-session
+             within a communication session.  A maximum number of 16
+             sub-sessions are supported; this limitation is
+             dictated by reasons of compatibility with other
+             transport protocols."
+        ::= { raqmonDsNotificationEntry 2 }
+
+   raqmonDsPeerAddrType OBJECT-TYPE
+       SYNTAX InetAddressType
+       MAX-ACCESS not-accessible
+       STATUS current
+       DESCRIPTION
+           "The type of the Internet address of the peer participant
+            for this session."
+       REFERENCE
+           "Section 5.2 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 3 }
+
+   raqmonDsPeerAddr OBJECT-TYPE
+       SYNTAX InetAddress
+       MAX-ACCESS not-accessible
+       STATUS current
+       DESCRIPTION
+           "The Internet Address of the peer participant for this
+            session."
+       REFERENCE
+           "Section 5.2 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 4 }
+
+   raqmonDsAppName  OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "This is a text string giving the name and possibly the
+            version of the application associated with that session,
+            e.g., 'XYZ VoIP Agent 1.2'."
+       REFERENCE
+           "Section 5.28 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 5 }
+
+   raqmonDsDataSourceDevicePort OBJECT-TYPE
+       SYNTAX     InetPortNumber
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The port number from which data for this session was sent
+            by the Data Source device."
+       REFERENCE
+           "Section 5.5 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 6 }
+
+   raqmonDsReceiverDevicePort OBJECT-TYPE
+       SYNTAX     InetPortNumber
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The port number where the data for this session was
+            received."
+       REFERENCE
+           "Section 5.6 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 7 }
+
+   raqmonDsSessionSetupDateTime OBJECT-TYPE
+       SYNTAX     DateAndTime
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The time when session was initiated."
+       REFERENCE
+           "Section 5.7 of [RFC4710]"
+   ::= { raqmonDsNotificationEntry 8 }
+
+   raqmonDsSessionSetupDelay OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..65535)
+       UNITS      "milliseconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Session setup time."
+       REFERENCE
+           "Section 5.8 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 9 }
+
+   raqmonDsSessionDuration OBJECT-TYPE
+       SYNTAX     Unsigned32
+       UNITS      "seconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Session duration, including setup time.  The SYNTAX of
+            this object allows expression of the duration of sessions
+            that do not exceed 4660 hours and 20 minutes."
+       REFERENCE
+           "Section 5.9 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 10 }
+
+   raqmonDsSessionSetupStatus OBJECT-TYPE
+       SYNTAX     SnmpAdminString
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Describes appropriate communication session states, e.g.,
+            Call Established successfully, RSVP reservation
+            failed, etc."
+       REFERENCE
+           "Section 5.10 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 11 }
+
+   raqmonDsRoundTripEndToEndNetDelay OBJECT-TYPE
+       SYNTAX     Unsigned32
+       UNITS      "milliseconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Most recent available information about the
+            round-trip end-to-end network delay."
+       REFERENCE
+           "Section 5.11 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry  12}
+
+   raqmonDsOneWayEndToEndNetDelay OBJECT-TYPE
+       SYNTAX     Unsigned32
+       UNITS      "milliseconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Most recent available information about the
+            one-way end-to-end network delay."
+       REFERENCE
+           "Section 5.12 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry  13}
+
+   raqmonDsApplicationDelay OBJECT-TYPE
+       SYNTAX     Unsigned32  (0..65535)
+       UNITS      "milliseconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Most recent available information about the
+            application delay."
+       REFERENCE
+           "Section 5.13 of [RFC4710"
+       ::= { raqmonDsNotificationEntry  14}
+
+   raqmonDsInterArrivalJitter OBJECT-TYPE
+       SYNTAX     Unsigned32  (0..65535)
+       UNITS      "milliseconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "An estimate of the inter-arrival jitter."
+       REFERENCE
+           "Section 5.14 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry  15}
+
+   raqmonDsIPPacketDelayVariation OBJECT-TYPE
+       SYNTAX     Unsigned32  (0..65535)
+       UNITS      "milliseconds"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "An estimate of the inter-arrival delay variation."
+       REFERENCE
+           "Section 5.15 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry  16}
+
+   raqmonDsTotalPacketsReceived OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS     "packets"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The number of packets transmitted within a communication
+
+            session by the receiver since the start of the session."
+       REFERENCE
+           "Section 5.16 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 17 }
+
+   raqmonDsTotalPacketsSent OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS     "packets"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The number of packets transmitted within a communication
+            session by the sender since the start of the session."
+       REFERENCE
+           "Section 5.17 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 18 }
+
+   raqmonDsTotalOctetsReceived OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "octets"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The total number of payload octets (i.e., not including
+            header or padding octets) transmitted in packets by the
+            receiver within a communication session since the start
+            of the session."
+       REFERENCE
+           "Section 5.18 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 19 }
+
+   raqmonDsTotalOctetsSent OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "octets"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The number of payload octets (i.e., not including headers
+            or padding) transmitted in packets by the sender within
+            a communication sub-session since the start of the
+            session."
+       REFERENCE
+           "Section 5.19 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 20 }
+
+   raqmonDsCumulativePacketLoss OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "packets"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The number of packets from this session whose loss
+            had been detected since the start of the session."
+       REFERENCE
+           "Section 5.20 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 21 }
+
+   raqmonDsPacketLossFraction OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..100)
+       UNITS      "percentage of packets sent"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The percentage of lost packets with respect to the
+            overall packets sent.  This is defined to be 100 times
+            the number of packets lost divided by the number of
+            packets expected."
+       REFERENCE
+           "Section 5.21 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 22 }
+
+   raqmonDsCumulativeDiscards OBJECT-TYPE
+       SYNTAX     Counter32
+       UNITS      "packets"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The number of packet discards detected since the
+            start of the session."
+       REFERENCE
+           "Section 5.22 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 23 }
+
+   raqmonDsDiscardsFraction OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..100)
+       UNITS      "percentage of packets sent"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The percentage of discards with respect to the overall
+            packets sent.  This is defined to be 100 times the number
+            of discards divided by the number of packets expected."
+       REFERENCE
+           "Section 5.23 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 24 }
+
+   raqmonDsSourcePayloadType OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..127)
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The payload type of the packet sent by this RDS."
+       REFERENCE
+           "RFC 1890, Section 5.24 of [RFC4710] "
+       ::= { raqmonDsNotificationEntry 25 }
+
+   raqmonDsReceiverPayloadType OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..127)
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "The payload type of the packet received by this RDS."
+       REFERENCE
+           "RFC 1890, Section 5.25 of [RFC4710] "
+   ::= { raqmonDsNotificationEntry 26 }
+
+   raqmonDsSourceLayer2Priority OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..7)
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Source Layer 2 priority used by the data source to send
+            packets to the receiver by this data source during this
+            communication session."
+       REFERENCE
+           "Section 5.26 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 27 }
+
+   raqmonDsSourceDscp OBJECT-TYPE
+       SYNTAX     Dscp
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Layer 3 TOS/DSCP values used by the Data Source to
+            prioritize traffic sent."
+       REFERENCE
+           "Section 5.27 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 28 }
+
+   raqmonDsDestinationLayer2Priority OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..7)
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Destination Layer 2 priority.  This is the priority used
+            by the peer communicating entity to send packets to the
+            data source."
+       REFERENCE
+           "Section 5.28 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 29 }
+
+   raqmonDsDestinationDscp OBJECT-TYPE
+       SYNTAX     Dscp
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Layer 3 TOS/DSCP values used by the
+            peer communicating entity to prioritize traffic
+            sent to the source."
+       REFERENCE
+           "Section 5.29 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 30 }
+
+   raqmonDsCpuUtilization OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..100)
+       UNITS      "percent"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Latest available information about the total CPU
+            utilization."
+       REFERENCE
+           "Section 5.30 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 31 }
+
+   raqmonDsMemoryUtilization OBJECT-TYPE
+       SYNTAX     Unsigned32 (0..100)
+       UNITS      "percent"
+       MAX-ACCESS accessible-for-notify
+       STATUS     current
+       DESCRIPTION
+           "Latest available information about the total memory
+            utilization."
+       REFERENCE
+           "Section 5.31 of [RFC4710]"
+       ::= { raqmonDsNotificationEntry 32 }
+
+   -- definitions of the notifications
+   --
+   -- raqmonDsAppName is the only object that MUST be sent by an
+   -- RDS every time the static notification is generated.
+
+   -- raqmonDsTotalPacketsReceived is the only object that MUST be
+   -- sent by an RD every time the dynamic notification is generated.
+
+   -- Other objects from the raqmonDsNotificationTable may be
+   -- included in the variable binding list.  Specifically, a raqmon
+   -- notification will include MIB objects that provide information
+   -- about metrics that characterize the application session
+
+      raqmonDsStaticNotification NOTIFICATION-TYPE
+       OBJECTS { raqmonDsAppName }
+       STATUS current
+       DESCRIPTION
+           "This notification maps the static parameters in the
+            BASIC RAQMON PDU onto an SNMP transport.
+            This notification is expected to be sent once per
+            session, or when a new sub-session is initiated.
+            The following objects MAY be carried by the
+            raqmonDsStaticNotification:
+
+            raqmonDsDataSourceDevicePort,
+            raqmonDsReceiverDevicePort,
+            raqmonDsSessionSetupDateTime,
+            raqmonDsSessionSetupDelay,
+            raqmonDsSessionDuration,
+            raqmonDsSourcePayloadType,
+            raqmonDsReceiverPayloadType,
+            raqmonDsSourceLayer2Priority,
+            raqmonDsSourceDscp,
+            raqmonDsDestinationLayer2Priority,
+            raqmonDsDestinationDscp
+
+            It is RECOMMENDED to keep the size of a notification
+            within the MTU size limits in order to avoid
+            fragmentation."
+       ::= { raqmonDsNotifications  1 }
+
+   raqmonDsDynamicNotification NOTIFICATION-TYPE
+       OBJECTS { raqmonDsTotalPacketsReceived }
+       STATUS current
+       DESCRIPTION
+           "This notification maps the dynamic parameters in the
+            BASIC RAQMON PDU onto an SNMP transport.
+
+            The following objects MAY be carried by the
+            raqmonDsDynamicNotification:
+
+            raqmonDsRoundTripEndToEndNetDelay,
+            raqmonDsOneWayEndToEndNetDelay,
+            raqmonDsApplicationDelay,
+            raqmonDsInterArrivalJitter,
+            raqmonDsIPPacketDelayVariation,
+            raqmonDsTotalPacketsSent,
+            raqmonDsTotalOctetsReceived,
+            raqmonDsTotalOctetsSent,
+            raqmonDsCumulativePacketLoss,
+            raqmonDsPacketLossFraction,
+            raqmonDsCumulativeDiscards,
+            raqmonDsDiscardsFraction,
+            raqmonDsCpuUtilization,
+            raqmonDsMemoryUtilization
+
+            It is RECOMMENDED to keep the size of a notification
+            within the MTU size limits in order to avoid
+            fragmentation."
+       ::= { raqmonDsNotifications  2 }
+
+   raqmonDsByeNotification NOTIFICATION-TYPE
+       OBJECTS { raqmonDsAppName }
+       STATUS current
+       DESCRIPTION
+           "The BYE Notification.  This Notification is the
+            equivalent of the RAQMON NULL PDU, which signals the
+            end of a RAQMON session."
+       ::= { raqmonDsNotifications  3 }
+
+   --
+   -- conformance information
+   raqmonDsCompliance OBJECT IDENTIFIER ::=
+                                        { raqmonDsConformance 1 }
+   raqmonDsGroups OBJECT IDENTIFIER ::= { raqmonDsConformance 2 }
+
+raqmonDsBasicCompliance MODULE-COMPLIANCE
+        STATUS current
+        DESCRIPTION
+           "The compliance statement for SNMP entities that
+            implement this MIB module.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2, but
+            for which we have the following compliance requirements,
+            expressed in OBJECT clause form in this description
+            clause:
+
+            -- OBJECT      raqmonDsPeerAddrType
+            -- SYNTAX      InetAddressType { ipv4(1), ipv6(2) }
+
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4
+            --     and IPv6 address types.
+            --
+            -- OBJECT      raqmonDsPeerAddr
+            -- SYNTAX      InetAddress (SIZE(4|16))
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4
+            --     and IPv6 address types.
+            --
+           "
+        MODULE  -- this module
+            MANDATORY-GROUPS { raqmonDsNotificationGroup,
+                               raqmonDsPayloadGroup }
+        ::= { raqmonDsCompliance 1 }
+
+   raqmonDsNotificationGroup NOTIFICATION-GROUP
+       NOTIFICATIONS { raqmonDsStaticNotification,
+                       raqmonDsDynamicNotification,
+                       raqmonDsByeNotification }
+       STATUS current
+       DESCRIPTION
+           "Standard RAQMON Data Source Notification group."
+       ::= { raqmonDsGroups 1 }
+
+   raqmonDsPayloadGroup OBJECT-GROUP
+       OBJECTS { raqmonDsAppName,
+                 raqmonDsDataSourceDevicePort,
+                 raqmonDsReceiverDevicePort,
+                 raqmonDsSessionSetupDateTime,
+                 raqmonDsSessionSetupDelay,
+                 raqmonDsSessionDuration,
+                 raqmonDsSessionSetupStatus,
+                 raqmonDsRoundTripEndToEndNetDelay,
+                 raqmonDsOneWayEndToEndNetDelay,
+                 raqmonDsApplicationDelay,
+                 raqmonDsInterArrivalJitter,
+                 raqmonDsIPPacketDelayVariation,
+                 raqmonDsTotalPacketsReceived,
+                 raqmonDsTotalPacketsSent,
+                 raqmonDsTotalOctetsReceived,
+                 raqmonDsTotalOctetsSent,
+                 raqmonDsCumulativePacketLoss,
+                 raqmonDsPacketLossFraction,
+                 raqmonDsCumulativeDiscards,
+                 raqmonDsDiscardsFraction,
+                 raqmonDsSourcePayloadType,
+                 raqmonDsReceiverPayloadType,
+                 raqmonDsSourceLayer2Priority,
+                 raqmonDsSourceDscp,
+                 raqmonDsDestinationLayer2Priority,
+                 raqmonDsDestinationDscp,
+                 raqmonDsCpuUtilization,
+                 raqmonDsMemoryUtilization }
+       STATUS current
+       DESCRIPTION
+           "Standard RAQMON Data Source payload MIB objects group."
+       ::= { raqmonDsGroups 2 }
+
+   END
diff --git a/snmp_builder/mibs/RDBMS-MIB.mib b/snmp_builder/mibs/RDBMS-MIB.mib
new file mode 100644
index 0000000..b1b5dbb
--- /dev/null
+++ b/snmp_builder/mibs/RDBMS-MIB.mib
@@ -0,0 +1,1377 @@
+RDBMS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Gauge32, Integer32
+        FROM SNMPv2-SMI
+    DisplayString, DateAndTime, AutonomousType
+        FROM SNMPv2-TC
+    applIndex, applGroups
+        FROM NETWORK-SERVICES-MIB
+    mib-2
+        FROM RFC1213-MIB;
+
+rdbmsMIB MODULE-IDENTITY
+    LAST-UPDATED "9406150655Z"
+    ORGANIZATION "IETF RDBMSMIB Working Group"
+    CONTACT-INFO
+            "           David Brower
+
+                Postal: The ASK Group, INGRES DBMS Development
+                        1080 Marina Village Parkway
+                        Alameda, CA  94501
+                        US
+
+                   Tel: +1 510 748 3418
+                   Fax: +1 510 748 2770
+
+                E-mail: daveb@ingres.com"
+    DESCRIPTION
+        "The MIB module to describe objects for generic relational
+         databases."
+    ::= { mib-2 39 }
+
+rdbmsObjects        OBJECT IDENTIFIER ::= { rdbmsMIB 1 }
+
+----------------------------------------------------------------
+
+rdbmsDbTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RdbmsDbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of databases installed on a system."
+    ::= { rdbmsObjects 1 }
+
+rdbmsDbEntry    OBJECT-TYPE
+    SYNTAX      RdbmsDbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry for a single database on the host.  Whether a
+         particular database is represented by a row in rdbmsDbTable
+         may be dependent on the activity level of that database,
+         according to the product's implementation.  An instance of
+         rdbmsRelState having the value active, other, or restricted
+         implies that an entry, corresponding to that instance, will
+         be present."
+    INDEX  { rdbmsDbIndex }
+    ::= { rdbmsDbTable 1 }
+
+RdbmsDbEntry    ::=
+    SEQUENCE {
+        rdbmsDbIndex            INTEGER,
+        rdbmsDbPrivateMibOID        OBJECT IDENTIFIER,
+        rdbmsDbVendorName       DisplayString,
+        rdbmsDbName             DisplayString,
+        rdbmsDbContact          DisplayString
+    }
+
+rdbmsDbIndex        OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A numeric index, unique among all the databases from all
+         products on this host.  This value is a surrogate for the
+         conceptually unique key, which is {PrivateMibOID,
+         databasename}"
+    ::= { rdbmsDbEntry  1 }
+
+rdbmsDbPrivateMibOID    OBJECT-TYPE
+    SYNTAX          OBJECT IDENTIFIER
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The authoritative identification for the private MIB for
+        this database, presumably based on the vendor, e.g., {
+        enterprises 111 <optional subidentifiers>} for Oracle
+        databases, {enterprises 757 <optional subidentifiers>} for
+        Ingres databases, { enterprises 897 <optional
+        subidentifiers>} for Sybase databases, etc.
+
+        If no OBJECT IDENTIFIER exists for the private MIB, attempts
+
+        to access this object will return noSuchName (SNMPv1)
+        or noSuchInstance (SNMPv2)."
+    ::= { rdbmsDbEntry  2 }
+
+rdbmsDbVendorName   OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The name of the vendor whose RDBMS manages this database,
+         for informational purposes."
+    ::= { rdbmsDbEntry 3 }
+
+rdbmsDbName     OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The name of this database, in a product specific format.  The
+         product may need to qualify the name in some way to resolve
+         conflicts if it is possible for a database name to be
+         duplicated on a host.  It might be necessary to construct a
+         hierarchical name embedding the RDBMS instance/installation
+         on the host, and/or the owner of the database.  For instance,
+         '/test-installation/database-owner/database-name'."
+    ::= { rdbmsDbEntry 4 }
+
+rdbmsDbContact  OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The textual identification of the contact person for this
+         managed database, together with information on how to contact
+         this person.
+
+         Note: if there is no server associated with this database, an
+         agent may need to keep this in other persistent storage,
+         e.g., a configuration file.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsDbEntry 5 }
+
+----------------------------------------------------------------
+
+rdbmsDbInfoTable    OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RdbmsDbInfoEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table of additional information about databases present
+         on the host."
+    ::= { rdbmsObjects 2 }
+
+rdbmsDbInfoEntry    OBJECT-TYPE
+    SYNTAX          RdbmsDbInfoEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information that must be present if the database is actively
+         opened.  If the database is not actively opened, then
+         attempts to access corresponding instances in this table may
+         result in either noSuchName (SNMPv1) or noSuchInstance
+         (SNMPv2).  'Actively opened' means at least one of the
+         rdbmsRelState entries for this database in the rdbmsRelTable
+         is active(2)."
+    INDEX  { rdbmsDbIndex }
+    ::= { rdbmsDbInfoTable 1 }
+
+RdbmsDbInfoEntry ::=
+    SEQUENCE {
+        rdbmsDbInfoProductName      DisplayString,
+        rdbmsDbInfoVersion          DisplayString,
+        rdbmsDbInfoSizeUnits        INTEGER,
+        rdbmsDbInfoSizeAllocated    INTEGER,
+        rdbmsDbInfoSizeUsed         INTEGER,
+        rdbmsDbInfoLastBackup       DateAndTime
+    }
+
+rdbmsDbInfoProductName  OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The textual product name of the server that created or last
+         restructured this database.  The format is product specific."
+    ::= { rdbmsDbInfoEntry 1 }
+
+rdbmsDbInfoVersion  OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The version number of the server that created or last
+         restructured this database.  The format is product specific."
+    ::= { rdbmsDbInfoEntry 2 }
+
+rdbmsDbInfoSizeUnits    OBJECT-TYPE
+    SYNTAX              INTEGER {
+                            bytes(1),
+                            kbytes(2),
+                            mbytes(3),
+                            gbytes(4),
+                            tbytes(5)
+                            }
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "Identification of the units used to measure the size of this
+         database in rdbmsDbInfoSizeAllocated and rdbmsDbInfoSizeUsed.
+         bytes(1) indicates individual bytes, kbytes(2) indicates
+         units of kilobytes, mbytes(3) indicates units of megabytes,
+         gbytes(4) indicates units of gigabytes, and tbytes(5)
+         indicates units of terabytes.  All are binary multiples -- 1K
+         = 1024.  If writable, changes here are reflected in the get
+         values of the associated objects."
+    ::= { rdbmsDbInfoEntry 3 }
+
+rdbmsDbInfoSizeAllocated    OBJECT-TYPE
+    SYNTAX                  INTEGER (1..2147483647)
+    MAX-ACCESS              read-write
+    STATUS                  current
+    DESCRIPTION
+        "The estimated size of this database (in
+         rdbmsDbInfoSizeUnits), which is the disk space that has been
+         allocated to it and is no longer available to users on this
+         host.  rdbmsDbInfoSize does not necessarily indicate the
+         amount of space actually in use for database data.  Some
+         databases may support extending allocated size, and others
+         may not.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+
+--       Note:  computing SizeAllocated may be expensive, and SNMP
+--       agents might cache the value to increase performance.
+    ::= { rdbmsDbInfoEntry 4 }
+
+rdbmsDbInfoSizeUsed     OBJECT-TYPE
+    SYNTAX              INTEGER (1..2147483647)
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The estimated size of this database, in rdbmsDbInfoSizeUnits,
+         which is actually in use for database data."
+
+--       Note:  computing SizeUsed may be expensive, and SNMP
+--       agents might cache the value to increase performance.
+    ::= { rdbmsDbInfoEntry 5 }
+
+rdbmsDbInfoLastBackup       OBJECT-TYPE
+     SYNTAX                 DateAndTime
+     MAX-ACCESS             read-only
+     STATUS                 current
+     DESCRIPTION
+        "The date and time that the latest complete or partial backup
+         of the database was taken. If a database has never been
+         backed up, then attempts to access this object will
+         result in either noSuchName (SNMPv1) or noSuchInstance
+         (SNMPv2)."
+     ::= { rdbmsDbInfoEntry 6 }
+
+----------------------------------------------------------------
+
+rdbmsDbParamTable       OBJECT-TYPE
+    SYNTAX              SEQUENCE OF RdbmsDbParamEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "The table of configuration parameters for a database.
+         Entries should be populated according to the following
+         guidelines:
+         (1) The value should be specified through administrative
+             (human) intervention.
+         (2) It should be configured on a per-database basis.
+         (3) One of the following is true:
+             (a) The parameter has a non-numeric value;
+             (b) The current value is numeric, but it only changes due
+                 to human intervention;
+             (c) The current value is numeric and dynamic, but the
+                 RDBMS does not track access/allocation failures
+                 related to the parameter;
+             (d) The current value is numeric and dynamic, the
+                 RDBMS tracks changes in access/allocation failures
+                 related to the parameter, but the failure has no
+                 significant impact on RDBMS performance or
+
+                 availability.
+             (e) The current value is numeric and dynamic, the
+                 RDBMS tracks changes in access/allocation failures
+                 related to the parameter, the failure has
+                 significant impact on RDBMS performance or
+                 availability, and is shown in the
+                 rdbmsDbLimitedResource table."
+    ::= { rdbmsObjects 3 }
+
+rdbmsDbParamEntry       OBJECT-TYPE
+    SYNTAX              RdbmsDbParamEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "An entry for a single configuration parameter for a database.
+         Parameters with single values have a subindex value of one.
+         If the parameter is naturally considered to contain a
+         variable number of members of a class, e.g.  members of the
+         DBA user group, or files which are part of the database, then
+         it must be presented as a set of rows.  If, on the other
+         hand, the parameter represents a set of choices from a class,
+         e.g. the permissions on a file or the options chosen out of
+         the set of all options allowed, AND is guaranteed to always
+         fit in the 255 character length of a DisplayString, then it
+         may be presented as a comma separated list with a subindex
+         value of one.  Zero may not be used as a subindex value.
+
+         If the database is not actively opened, then attempts
+         to access corresponding instances in this table may result in
+         either noSuchName (SNMPv1) or noSuchInstance (SNMPv2).
+         'Actively opened' means at least one of the
+         rdbmsRelState entries for this database in the rdbmsRelTable
+         is active(2)."
+    INDEX  { rdbmsDbIndex, rdbmsDbParamName, rdbmsDbParamSubIndex }
+    ::= { rdbmsDbParamTable 1 }
+
+RdbmsDbParamEntry ::=
+    SEQUENCE {
+        rdbmsDbParamName                DisplayString,
+        rdbmsDbParamSubIndex            INTEGER,
+        rdbmsDbParamID                  AutonomousType,
+        rdbmsDbParamCurrValue           DisplayString,
+        rdbmsDbParamComment             DisplayString
+    }
+
+rdbmsDbParamName        OBJECT-TYPE
+    SYNTAX              DisplayString (SIZE (1..64))
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "The name of a configuration parameter for a database.  This
+         name is product-specific.  The length is limited to 64
+         characters to constrain the number of sub-identifiers needed
+         for instance identification (and to minimize network
+         traffic)."
+    ::= { rdbmsDbParamEntry 1 }
+
+rdbmsDbParamSubIndex    OBJECT-TYPE
+    SYNTAX              INTEGER (1..2147483647)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "The subindex value for this parameter.  If the parameter is
+         naturally considered to contain a variable number of members
+         of a class, e.g.  members of the DBA user group, or files
+         which are part of the database, then it must be presented as
+         a set of rows.  If, on the other hand, the parameter
+         represents a set of choices from a class, e.g. the
+         permissions on a file or the options chosen out of the set of
+         all options allowed, AND is guaranteed to always fit in the
+         255 character length of a DisplayString, then it may be
+         presented as a comma separated list with a subindex value of
+         one.  Zero may not be used as a value."
+    ::= { rdbmsDbParamEntry 2 }
+
+rdbmsDbParamID          OBJECT-TYPE
+    SYNTAX              AutonomousType
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The ID of the parameter which may be described in some other
+         MIB (e.g., an enterprise-specific MIB module).  If there is
+         no ID for this rdbmsDbParamName, attempts to access this
+         object will return noSuchName (SNMPv1) or noSuchInstance
+         (SNMPv2)."
+    ::= { rdbmsDbParamEntry 3 }
+
+rdbmsDbParamCurrValue OBJECT-TYPE
+    SYNTAX              DisplayString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "The value for a configuration parameter now in effect, the
+         actual setting for the database.  While there may multiple
+         values in the temporal domain of interest (for instance, the
+
+         value to take effect at the next restart), this is the
+         current setting.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsDbParamEntry 4 }
+
+rdbmsDbParamComment     OBJECT-TYPE
+    SYNTAX              DisplayString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Annotation which describes the purpose of a configuration
+         parameter or the reason for a particular parameter's
+         setting.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsDbParamEntry 5 }
+
+----------------------------------------------------------------
+
+rdbmsDbLimitedResourceTable         OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RdbmsDbLimitedResourceEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table of limited resources that are kept per-database."
+    ::= { rdbmsObjects 4 }
+
+rdbmsDbLimitedResourceEntry     OBJECT-TYPE
+    SYNTAX      RdbmsDbLimitedResourceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry for a single limited resource kept per-database.
+         A limited resource has maximum use determined by a parameter
+         that might or might not be changeable at run time, or visible
+         in the rdbmsDbParamTable. Examples would be the number of
+         available locks, or disk space on a partition.  Arrays of
+         resources are supported through an integer sub index, which
+         should have the value of one for single-instance names.
+
+         Limited resources that are shared across databases, are best
+         put in the rdbmsSvrLimitedResourceTable instead of this one.
+
+         If the database is not actively opened, then attempts to
+         access corresponding instances in this table may result in
+         either noSuchName (SNMPv1) or noSuchInstance (SNMPv2).
+         'Actively opened' means at least one of the rdbmsRelState
+         entries for this database in the rdbmsRelTable is active(2)."
+    INDEX { rdbmsDbIndex, rdbmsDbLimitedResourceName }
+    ::= { rdbmsDbLimitedResourceTable 1 }
+
+RdbmsDbLimitedResourceEntry ::=
+    SEQUENCE {
+        rdbmsDbLimitedResourceName          DisplayString,
+        rdbmsDbLimitedResourceID            AutonomousType,
+        rdbmsDbLimitedResourceLimit         INTEGER,
+        rdbmsDbLimitedResourceCurrent       INTEGER,
+        rdbmsDbLimitedResourceHighwater     INTEGER,
+        rdbmsDbLimitedResourceFailures      Counter32,
+        rdbmsDbLimitedResourceDescription   DisplayString
+    }
+
+rdbmsDbLimitedResourceName          OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the resource, for instance 'global locks' or
+         'locks for the FOO database', or 'data space on /dev/rdsk/5s0
+         for FOO'. The length is limited to 64 characters to constrain
+         the number of sub-identifiers needed for instance
+         identification (and to minimize network traffic)."
+    ::= { rdbmsDbLimitedResourceEntry  1 }
+
+rdbmsDbLimitedResourceID OBJECT-TYPE
+    SYNTAX              AutonomousType
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The ID of the resource which may be described in some other
+         MIB (e.g., an enterprise-specific MIB module).  If there is
+         no ID for this rdbmsDbLimitedResourceName, attempts to access
+         this object will return noSuchName (SNMPv1) or noSuchInstance
+         (SNMPv2)."
+    ::= { rdbmsDbLimitedResourceEntry 2 }
+
+rdbmsDbLimitedResourceLimit         OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The maximum value the resource use may attain.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsDbLimitedResourceEntry  3 }
+
+rdbmsDbLimitedResourceCurrent       OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current value for the resource."
+    ::= { rdbmsDbLimitedResourceEntry  4 }
+
+rdbmsDbLimitedResourceHighwater     OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The maximum value of the resource seen since applUpTime
+         was reset for the earliest server which has the database
+         actively opened.
+
+         If there are two servers with the database open, and the
+         oldest one dies, the proper way to invalidate the value is by
+         resetting sysUpTime."
+    ::= { rdbmsDbLimitedResourceEntry  5 }
+
+rdbmsDbLimitedResourceFailures      OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of times the system wanted to exceed the limit of
+         the resource since applUpTime was reset for the earliest
+         server which has the database actively opened.
+
+         If there are two servers with the DB open, and the
+         oldest one dies, the proper way to invalidate the value is by
+         resetting sysUpTime."
+    ::= { rdbmsDbLimitedResourceEntry  6 }
+
+rdbmsDbLimitedResourceDescription           OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "A description of the resource and the meaning of the integer
+         units used for Limit, Current, and Highwater.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsDbLimitedResourceEntry  7 }
+
+----------------------------------------------------------------
+
+rdbmsSrvTable       OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RdbmsSrvEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table of database servers running or installed
+         on a system."
+    ::= { rdbmsObjects 5 }
+
+rdbmsSrvEntry   OBJECT-TYPE
+    SYNTAX      RdbmsSrvEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry for a single database server.  A server is an
+         independent entity that provides access to one or more
+         databases.  Failure of one does not affect access to
+         databases through any other servers.  There might be one or
+         more servers providing access to a database.  A server may be
+         a 'process' or collection of 'processes', as interpreted by
+         the product."
+    INDEX { applIndex }
+    ::= { rdbmsSrvTable 1 }
+
+RdbmsSrvEntry ::=
+    SEQUENCE {
+        rdbmsSrvPrivateMibOID   OBJECT IDENTIFIER,
+        rdbmsSrvVendorName  DisplayString,
+        rdbmsSrvProductName DisplayString,
+        rdbmsSrvContact     DisplayString
+    }
+
+rdbmsSrvPrivateMibOID   OBJECT-TYPE
+    SYNTAX          OBJECT IDENTIFIER
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The authoritative identification for the private MIB for this
+         server, presumably based on the vendor, e.g., { enterprises
+         111 <optional subidentifiers>} for Oracle servers, {
+         enterprises 757 <optional subidentifiers>} for Ingres
+         servers, { enterprises 897 <optional subidentifiers>} for
+         Sybase servers, etc.
+
+         If no OBJECT IDENTIFIER exists for the private MIB, attempts
+         to access this object will return noSuchName (SNMPv1)
+         or noSuchInstance (SNMPv2)."
+    ::= { rdbmsSrvEntry  1 }
+
+rdbmsSrvVendorName  OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The name of the vendor whose RDBMS manages this database,
+         for informational purposes."
+    ::= { rdbmsSrvEntry 2 }
+
+rdbmsSrvProductName  OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The product name of this server.  This is normally the
+         vendor's formal name for the product, in product specific
+         format."
+    ::= { rdbmsSrvEntry 3 }
+
+rdbmsSrvContact OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The textual identification of the contact person for this
+         managed server, together with information on how to contact
+         this person.
+
+         Note: if there is no active server associated with this
+         object, an agent may need to keep this in other persistent
+         storage, e.g., a configuration file.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsSrvEntry 4 }
+
+----------------------------------------------------------------
+
+rdbmsSrvInfoTable   OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RdbmsSrvInfoEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table of additional information about database servers.
+
+         Entries in this table correspond to applications in the
+         APPLICATION-MIB applTable.  Some objects in that table are
+         application-specific.  When they are associated with an RDBMS
+         server in this table, the objects have the following
+         meanings.
+
+         applName - The name of this server, i.e., the process or
+         group of processes providing access to this database.  The
+         exact format will be product and host specific.
+
+         applVersion - The version number of this server, in product
+         specific format.
+
+         applOperStatus - up(1) means operational and available for
+         general use.  down(2) means the server is not available for
+         use, but is known to the agent.  The other states have broad
+         meaning, and may need to be supplemented by the vendor
+         private MIB.  Halted(3) implies an administrative state of
+         unavailability.  Congested(4) implies a resource or or
+         administrative limit is prohibiting new inbound associations.
+         The 'available soon' description of restarting(5) may include
+         an indeterminate amount of recovery.
+
+         applLastChange is the time the agent noticed the most recent
+         change to applOperStatus.
+
+         applInboundAssociation is the number of currently active
+         local and remote conversations (usually SQL connects).
+
+         applOutboundAssociations is not provided by this MIB.
+
+         applAccumulatedInboundAssociations is the total number of
+         local and remote conversations started since the server came
+         up.
+
+         applAccumulatedOutbound associations is not provided by this
+         MIB.
+
+         applLastInboundActivity is the time the most recent local or
+
+         remote conversation was attempted or disconnected.
+
+         applLastOutboundActivity is not provided by this MIB.
+
+         applRejectedInboundAssociations is the number of local or
+         remote conversations rejected by the server for
+         administrative reasons or because of resource limitations.
+
+         applFailedOutboundAssociations is not provided by this MIB."
+    ::= { rdbmsObjects 6 }
+
+rdbmsSrvInfoEntry   OBJECT-TYPE
+    SYNTAX          RdbmsSrvInfoEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Information that must be present for a single 'up' database
+         server, with visibility determined by the value of the
+         corresponding applOperStatus object.  If an instance of
+         applOperStatus is not up(1), then attempts to access
+         corresponding instances in this table may result in either
+         noSuchName (SNMPv1) or noSuchInstance (SNMPv2) being returned
+         by the agent."
+    INDEX { applIndex }
+    ::= { rdbmsSrvInfoTable 1 }
+
+RdbmsSrvInfoEntry ::=
+    SEQUENCE {
+        rdbmsSrvInfoStartupTime                 DateAndTime,
+        rdbmsSrvInfoFinishedTransactions        Gauge32,
+        rdbmsSrvInfoDiskReads                   Counter32,
+        rdbmsSrvInfoDiskWrites                  Counter32,
+        rdbmsSrvInfoLogicalReads                Counter32,
+        rdbmsSrvInfoLogicalWrites               Counter32,
+        rdbmsSrvInfoPageWrites                  Counter32,
+        rdbmsSrvInfoPageReads                   Counter32,
+        rdbmsSrvInfoDiskOutOfSpaces             Counter32,
+        rdbmsSrvInfoHandledRequests             Counter32,
+        rdbmsSrvInfoRequestRecvs                Counter32,
+        rdbmsSrvInfoRequestSends                Counter32,
+        rdbmsSrvInfoHighwaterInboundAssociations        Gauge32,
+        rdbmsSrvInfoMaxInboundAssociations              Gauge32
+    }
+
+rdbmsSrvInfoStartupTime  OBJECT-TYPE
+    SYNTAX              DateAndTime
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The date and time at which this server was last started."
+    ::= { rdbmsSrvInfoEntry 1 }
+
+rdbmsSrvInfoFinishedTransactions  OBJECT-TYPE
+    SYNTAX              Gauge32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The number of transactions visible to this server that have
+         been completed by either commit or abort.  Some database
+         operations, such as read-only queries, may not result in the
+         creation of a transaction."
+    ::= { rdbmsSrvInfoEntry 2 }
+
+rdbmsSrvInfoDiskReads   OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The total number of reads of database files issued to the
+         operating system by this server since startup.  Numbers are
+         not comparable between products.  What constitutes a
+         readand how it is accounted is product-specific."
+    ::= { rdbmsSrvInfoEntry 3 }
+
+rdbmsSrvInfoLogicalReads    OBJECT-TYPE
+    SYNTAX                  Counter32
+    MAX-ACCESS              read-only
+    STATUS                  current
+    DESCRIPTION
+        "The total number of logical reads of database files made
+         internally by this server since startup.  The values of this
+         object and those of rdbmsSrvInfoDiskReads reveal the effect
+         of caching on read operation. Numbers are not comparable
+         between products, and may only be meaningful when aggregated
+         across all servers sharing a common cache."
+    ::= { rdbmsSrvInfoEntry 4 }
+
+rdbmsSrvInfoDiskWrites  OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The total number of writes to database files issued to the
+         operating system by this server since startup.  Numbers are
+         not comparable between products."
+    ::= { rdbmsSrvInfoEntry 5 }
+
+rdbmsSrvInfoLogicalWrites  OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The total number of times parts of the database files have
+         been marked 'dirty' and in need of writing to the disk.  This
+         value and rdbmsSrvInfoDiskWrites give some indication of the
+         effect of 'write-behind' strategies in reducing the number of
+         disk writes compared to database operations.  Because the
+         writes may be done by servers other than those marking the
+         parts of the database files dirty, these values may only be
+         meaningful when aggregated across all servers sharing a
+         common cache.  Numbers are not comparable between products."
+    ::= { rdbmsSrvInfoEntry 6 }
+
+rdbmsSrvInfoPageReads   OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The total number of pages in database files read by this
+         server since startup.  'Pages' are product specific units of
+         disk i/o operations.  This value, along with
+         rdbmsSrvInfoDiskReads, reveals the effect of any grouping
+         read-ahead that may be used to enhance performance of some
+         queries, such as scans."
+    ::= { rdbmsSrvInfoEntry 7}
+
+rdbmsSrvInfoPageWrites  OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The total number of pages in database files written by this
+         server since startup.  Pages are product-specific units of
+         disk I/O.  This value, with rdbmsSrvInfoDiskWrites, shows the
+         effect of write strategies that collapse logical writes of
+         contiguous pages into single calls to the operating system."
+    ::= { rdbmsSrvInfoEntry 8 }
+
+rdbmsSrvInfoDiskOutOfSpaces OBJECT-TYPE
+    SYNTAX                  Counter32
+    MAX-ACCESS              read-only
+    STATUS                  current
+    DESCRIPTION
+        "The total number of times the server has been unable to
+         obtain disk space that it wanted, since server startup.  This
+         would be inspected by an agent on receipt of an
+         rdbmsOutOfSpace trap."
+    ::= { rdbmsSrvInfoEntry 9 }
+
+rdbmsSrvInfoHandledRequests     OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The total number of requests made to the server on inbound
+         associations.  The meaning of 'requests' is product specific,
+         and is not comparable between products.
+
+         This is intended to encapsulate high level semantic
+         operations between clients and servers, or between peers.
+         For instance, one request might correspond to a 'select' or
+         an 'insert' statement.  It is not intended to capture disk
+         i/o described in rdbmsSrvInfoDiskReads and
+         rdbmsSrvInfoDiskWrites."
+    ::= { rdbmsSrvInfoEntry 10 }
+
+rdbmsSrvInfoRequestRecvs        OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The number of receive operations made processing any requests
+         on inbound associations. The meaning of operations is product
+         specific, and is not comparable between products.
+
+         This is intended to capture lower-level i/o operations than
+         shown by HandledRequests, between clients and servers, or
+         between peers.  For instance, it might roughly correspond to
+         the amount of data given with an 'insert' statement.  It is
+         not intended to capture disk i/o described in
+         rdbmsSrvInfoDiskReads and rdbmsSrvInfoDiskWrites."
+    ::= { rdbmsSrvInfoEntry 11 }
+
+rdbmsSrvInfoRequestSends        OBJECT-TYPE
+    SYNTAX              Counter32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The number of send operations made processing requests
+         handled on inbound associations.  The meaning of operations
+         is product specific, and is not comparable between products.
+
+         This is intended to capture lower-level i/o operations than
+         shown by HandledRequests, between between clients and
+         servers, or between peers.  It might roughly correspond to
+         the number of rows returned by a 'select' statement.  It is
+         not intended to capture disk i/o described in DiskReads."
+    ::= { rdbmsSrvInfoEntry 12 }
+
+rdbmsSrvInfoHighwaterInboundAssociations  OBJECT-TYPE
+    SYNTAX              Gauge32
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The greatest number of inbound associations that have been
+         simultaneously open to this server since startup."
+    ::= { rdbmsSrvInfoEntry 13 }
+
+rdbmsSrvInfoMaxInboundAssociations OBJECT-TYPE
+    SYNTAX              Gauge32
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "The greatest number of inbound associations that can be
+         simultaneously open with this server.  If there is no limit,
+         then the value should be zero.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsSrvInfoEntry 14 }
+
+----------------------------------------------------------------
+
+rdbmsSrvParamTable      OBJECT-TYPE
+    SYNTAX              SEQUENCE OF RdbmsSrvParamEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "The table of configuration parameters for a server.  Entries
+         should be populated according to the following guidelines:
+         (1) The value should be specified through administrative
+             (human) intervention.
+         (2) It should be configured on a per-server or a more global
+             basis, with duplicate entries for each server sharing
+             use of the parameter.
+         (3) One of the following is true:
+             (a) The parameter has a non-numeric value;
+             (b) The current value is numeric, but it only changes due
+                 to human intervention;
+
+             (c) The current value is numeric and dynamic, but the
+                 RDBMS does not track access/allocation failures
+                 related to the parameter;
+             (d) The current value is numeric and dynamic, the
+                 RDBMS tracks changes in access/allocation failures
+                 related to the parameter, but the failure has no
+                 significant impact on RDBMS performance or
+                 availability.
+             (e) The current value is numeric and dynamic, the
+                 RDBMS tracks changes in access/allocation failures
+                 related to the parameter, the failure has
+                 significant impact on RDBMS performance or
+                 availability, and is shown in the
+                 rdbmsSrvLimitedResource table."
+    ::= { rdbmsObjects 7 }
+
+rdbmsSrvParamEntry      OBJECT-TYPE
+    SYNTAX              RdbmsSrvParamEntry
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "An entry for a single configuration parameter for a server.
+         Parameters with single values have a subindex value of one.
+         If the parameter is naturally considered to contain a
+         variable number of members of a class, e.g.  members of the
+         DBA user group, or tracepoints active in the server, then it
+         must be presented as a set of rows.  If, on the other hand,
+         the parameter represents a set of choices from a class,
+         e.g. the permissions on a file or the options chosen out of
+         the set of all options allowed, AND is guaranteed to always
+         fit in the 255 character length of a DisplayString, then it
+         may be presented as a comma separated list with a subindex
+         value of one.  Zero may not be used as a subindex value.
+
+         Entries for a server must be present if the value of the
+         corresponding applOperStatus object is up(1).  If an instance
+         of applOperStatus is not up(1), then attempts to access
+         corresponding instances in this table may result in either
+         noSuchName (SNMPv1) or noSuchInstance (SNMPv2) being returned
+         by the agent."
+    INDEX  { applIndex, rdbmsSrvParamName, rdbmsSrvParamSubIndex }
+    ::= { rdbmsSrvParamTable 1 }
+
+RdbmsSrvParamEntry ::=
+    SEQUENCE {
+        rdbmsSrvParamName           DisplayString,
+        rdbmsSrvParamSubIndex       INTEGER,
+        rdbmsSrvParamID             AutonomousType,
+        rdbmsSrvParamCurrValue      DisplayString,
+        rdbmsSrvParamComment        DisplayString
+    }
+
+rdbmsSrvParamName       OBJECT-TYPE
+    SYNTAX              DisplayString (SIZE (1..64))
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "The name of a configuration parameter for a server.  This
+         name is product-specific. The length is limited to 64
+         characters to constrain the number of sub-identifiers needed
+         for instance identification (and to minimize network
+         traffic)."
+    ::= { rdbmsSrvParamEntry 1 }
+
+rdbmsSrvParamSubIndex   OBJECT-TYPE
+    SYNTAX              INTEGER (1..2147483647)
+    MAX-ACCESS          not-accessible
+    STATUS              current
+    DESCRIPTION
+        "The subindex value for this parameter.  If the parameter is
+         naturally considered to contain a variable number of members
+         of a class, e.g.  members of the DBA user group, or files
+         which are part of the database, then it must be presented as
+         a set of rows.  If, on the other hand, the parameter
+         represents a set of choices from a class, e.g. the
+         permissions on a file or the options chosen out of the set of
+         all options allowed, AND is guaranteed to always fit in the
+         255 character length of a DisplayString, then it may be
+         presented as a comma separated list with a subindex value of
+         one.  Zero may not be used as a value."
+    ::= { rdbmsSrvParamEntry 2 }
+
+rdbmsSrvParamID         OBJECT-TYPE
+    SYNTAX              AutonomousType
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The ID of the parameter which may be described in some
+         other MIB.  If there is no ID for this rdbmsSrvParamName,
+         attempts to access this object will return noSuchName
+         (SNMPv1) or noSuchInstance (SNMPv2)."
+    ::= { rdbmsSrvParamEntry 3 }
+
+rdbmsSrvParamCurrValue  OBJECT-TYPE
+    SYNTAX              DisplayString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "The value for a configuration parameter now in effect, the
+         actual setting for the server.  While there may multiple
+         values in the temporal domain of interest (for instance, the
+         value to take effect at the next restart), this is the
+         current setting.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsSrvParamEntry 4 }
+
+rdbmsSrvParamComment    OBJECT-TYPE
+    SYNTAX              DisplayString
+    MAX-ACCESS          read-write
+    STATUS              current
+    DESCRIPTION
+        "Annotation which describes the purpose of a configuration
+         parameter or the reason for a particular parameter's
+         setting.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsSrvParamEntry 5 }
+
+----------------------------------------------------------------
+
+rdbmsSrvLimitedResourceTable        OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RdbmsSrvLimitedResourceEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The table of limited resources relevant to a server."
+    ::= { rdbmsObjects 8 }
+
+rdbmsSrvLimitedResourceEntry    OBJECT-TYPE
+    SYNTAX      RdbmsSrvLimitedResourceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry for a single limited resource kept by the server.
+         A limited resource has maximum use determined by a parameter
+         that might or might not changeable at run time, or visible in
+         the rbmsSrvParamTable.  Examples would be the number of
+         available locks, or number of concurrent executions allowed
+         in a server.  Arrays of resources are supported through an
+
+         integer subindex, which should have the value of one for
+         single-instance names.
+
+         Limited resources that are shared across servers or databases
+         are best duplicated in this table across
+         all servers accessing the resource."
+    INDEX { applIndex, rdbmsSrvLimitedResourceName }
+    ::= { rdbmsSrvLimitedResourceTable 1 }
+
+RdbmsSrvLimitedResourceEntry ::=
+    SEQUENCE {
+        rdbmsSrvLimitedResourceName         DisplayString,
+        rdbmsSrvLimitedResourceID           AutonomousType,
+        rdbmsSrvLimitedResourceLimit        INTEGER,
+        rdbmsSrvLimitedResourceCurrent      INTEGER,
+        rdbmsSrvLimitedResourceHighwater    INTEGER,
+        rdbmsSrvLimitedResourceFailures     Counter32,
+        rdbmsSrvLimitedResourceDescription  DisplayString
+    }
+
+rdbmsSrvLimitedResourceName         OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the resource, for instance 'threads' or
+         'semaphores', or 'buffer pages'"
+    ::= { rdbmsSrvLimitedResourceEntry  1 }
+
+rdbmsSrvLimitedResourceID OBJECT-TYPE
+    SYNTAX              AutonomousType
+    MAX-ACCESS          read-only
+    STATUS              current
+    DESCRIPTION
+        "The ID of the resource which may be described in some other
+         MIB.  If there is no ID for this rdbmsSrvLimitedResourceName,
+         attempts to access this object will return noSuchName
+         (SNMPv1) or noSuchInstance (SNMPv2)."
+    ::= { rdbmsSrvLimitedResourceEntry 2 }
+
+rdbmsSrvLimitedResourceLimit        OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The maximum value the resource use may attain.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsSrvLimitedResourceEntry  3 }
+
+rdbmsSrvLimitedResourceCurrent      OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The current value for the resource."
+    ::= { rdbmsSrvLimitedResourceEntry  4 }
+
+rdbmsSrvLimitedResourceHighwater            OBJECT-TYPE
+    SYNTAX          INTEGER (1..2147483647)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The maximum value of the resource seen since applUpTime
+         was reset."
+    ::= { rdbmsSrvLimitedResourceEntry  5 }
+
+rdbmsSrvLimitedResourceFailures     OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The number of times the system wanted to exceed the limit of
+         the resource since applUpTime was reset."
+    ::= { rdbmsSrvLimitedResourceEntry  6 }
+
+rdbmsSrvLimitedResourceDescription    OBJECT-TYPE
+    SYNTAX          DisplayString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "A description of the resource and the meaning of the integer
+         units used for Limit, Current, and Highwater.
+
+         Note that a compliant agent does not need to
+         allow write access to this object."
+    ::= { rdbmsSrvLimitedResourceEntry  7 }
+
+----------------------------------------------------------------
+
+rdbmsRelTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RdbmsRelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table relating databases and servers present on a host."
+    ::= { rdbmsObjects 9 }
+
+rdbmsRelEntry   OBJECT-TYPE
+    SYNTAX      RdbmsRelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry relating a single database server to a single
+         database to which it may provide access.  The table is
+         indexed first by the index of rdbmsDbTable, and then
+         rdbmsSrvTable, so that all servers capable of providing
+         access to a given database may be found by SNMP traversal
+         operations (get-next and get-bulk).  The makeup of this table
+         depends on the product's architecture, e.g. if it is one
+         server - many databases, then each server will appear n
+         times, where n is the number of databases it may access, and
+         each database will appear once.  If the architecture is one
+         database - many servers, then each server will appear once
+         and each database will appear n times, where n is the number
+         of servers that may be accessing it."
+    INDEX  { rdbmsDbIndex, applIndex }
+    ::= { rdbmsRelTable 1 }
+
+RdbmsRelEntry ::=
+    SEQUENCE {
+         rdbmsRelState          INTEGER,
+         rdbmsRelActiveTime     DateAndTime
+    }
+
+rdbmsRelState   OBJECT-TYPE
+    SYNTAX      INTEGER{
+                    other(1),
+                    active(2),
+                    available(3),
+                    restricted(4),
+                    unavailable(5)
+                    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The state of this server's access to this database.
+         Active(2) means the server is actively using the database.
+         Available(3) means the server could use the database if
+         necessary.  Restricted(4) means the database is in some
+         administratively determined state of less-than-complete
+         availability.  Unavailable(5) means the database is not
+         available through this server.  Other(1) means the
+         database/server is in some other condition, possibly
+         described in the vendor private MIB."
+    ::= { rdbmsRelEntry 1 }
+
+rdbmsRelActiveTime  OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The time the database was made active by the server.  If an
+         instance of rdbmsRelState is not active(1), then attempts to
+         access the corresponding instance of this object may result
+         in either noSuchName (SNMPv1) or noSuchInstance (SNMPv2)
+         being returned by the agent."
+    ::= { rdbmsRelEntry 2 }
+
+----------------------------------------------------------------
+
+-- Well known resources for which limits, high water marks,
+-- access or allocation failures, and current levels of use
+-- are possibly available in either the rdbmsDbLimitedResources
+-- or the rdbmsSrvLimitedResources tables.
+
+rdbmsWellKnownLimitedResources OBJECT IDENTIFIER
+        ::= { rdbmsObjects 10 }
+
+rdbmsLogSpace   OBJECT-IDENTITY
+                STATUS  current
+                DESCRIPTION
+                "Storage allocated for redo and undo logs."
+        ::= { rdbmsWellKnownLimitedResources 1}
+
+----------------------------------------------------------------
+
+rdbmsTraps       OBJECT IDENTIFIER ::= { rdbmsMIB 2 }
+
+rdbmsStateChange    NOTIFICATION-TYPE
+    OBJECTS         { rdbmsRelState }
+    STATUS          current
+    DESCRIPTION
+        "An rdbmsStateChange trap signifies that one of the database
+         server/databases managed by this agent has changed its
+         rdbmsRelState in a way that makes it less accessible for use.
+         For these purposes, both active(2) and available(3) are
+         considered fully accessible.  The state sent with the trap is
+         the new, less accessible state."
+    ::= { rdbmsTraps 1 }
+
+rdbmsOutOfSpace NOTIFICATION-TYPE
+    OBJECTS     { rdbmsSrvInfoDiskOutOfSpaces }
+    STATUS      current
+    DESCRIPTION
+        "An rdbmsOutOfSpace trap signifies that one of the database
+         servers managed by this agent has been unable to allocate
+         space for one of the databases managed by this agent.  Care
+         should be taken to avoid flooding the network with these
+         traps."
+    ::= { rdbmsTraps 2 }
+
+----------------------------------------------------------------
+
+-- compliance information
+
+rdbmsConformance    OBJECT IDENTIFIER ::= { rdbmsMIB 3 }
+rdbmsCompliances    OBJECT IDENTIFIER ::= { rdbmsConformance 1 }
+rdbmsGroups         OBJECT IDENTIFIER ::= { rdbmsConformance 2 }
+
+-- compliance statements
+
+rdbmsCompliance     MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which
+         implement the RDBMS MIB"
+    MODULE HOST-RESOURCES-MIB
+        MANDATORY-GROUPS    { hrSystem }
+    MODULE NETWORK-SERVICES-MIB
+        MANDATORY-GROUPS { applGroups }
+    MODULE RDBMS-MIB
+        MANDATORY-GROUPS { rdbmsGroup }
+
+    GROUP  rdbmsGroup
+        DESCRIPTION
+            "The rdbmsGroup is mandatory, but no write access
+             to objects is required for compliance."
+        OBJECT      rdbmsDbContact
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsDbParamCurrValue
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsDbParamComment
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsDbLimitedResourceLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsDbLimitedResourceDescription
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsSrvContact
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsSrvInfoMaxInboundAssociations
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsSrvParamCurrValue
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsSrvParamComment
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsSrvLimitedResourceLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+        OBJECT      rdbmsSrvLimitedResourceDescription
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "A compliant system need not allow write-access to this
+            object."
+    ::= { rdbmsCompliances 1 }
+
+-- units of conformance
+
+    -- rdbmsStateChange and rdbmsOutOfSpace traps are omitted
+    -- intentionally.  They are not required or part of any
+    -- conformance group.
+
+rdbmsGroup   OBJECT-GROUP
+    OBJECTS  {
+                rdbmsDbPrivateMibOID, rdbmsDbVendorName,
+                rdbmsDbName, rdbmsDbContact,
+                rdbmsDbInfoProductName, rdbmsDbInfoVersion,
+                rdbmsDbInfoSizeUnits, rdbmsDbInfoSizeAllocated,
+                rdbmsDbInfoSizeUsed, rdbmsDbInfoLastBackup,
+                rdbmsDbParamCurrValue, rdbmsDbParamComment,
+                rdbmsDbLimitedResourceLimit,
+                rdbmsDbLimitedResourceCurrent,
+                rdbmsDbLimitedResourceHighwater,
+                rdbmsDbLimitedResourceFailures,
+                rdbmsDbLimitedResourceDescription,
+                rdbmsSrvPrivateMibOID, rdbmsSrvVendorName,
+                rdbmsSrvProductName, rdbmsSrvContact,
+                rdbmsSrvInfoStartupTime,
+                rdbmsSrvInfoFinishedTransactions,
+                rdbmsSrvInfoDiskReads, rdbmsSrvInfoDiskWrites,
+                rdbmsSrvInfoLogicalReads, rdbmsSrvInfoLogicalWrites,
+                rdbmsSrvInfoPageReads, rdbmsSrvInfoPageWrites,
+                rdbmsSrvInfoHandledRequests,
+                rdbmsSrvInfoRequestRecvs, rdbmsSrvInfoRequestSends,
+                rdbmsSrvInfoHighwaterInboundAssociations,
+                rdbmsSrvInfoMaxInboundAssociations,
+                rdbmsSrvParamCurrValue, rdbmsSrvParamComment,
+                rdbmsSrvLimitedResourceLimit,
+                rdbmsSrvLimitedResourceCurrent,
+                rdbmsSrvLimitedResourceHighwater,
+                rdbmsSrvLimitedResourceFailures,
+                rdbmsSrvLimitedResourceDescription,
+                rdbmsRelState, rdbmsRelActiveTime }
+    STATUS   current
+    DESCRIPTION
+        "A collection of objects providing basic instrumentation of an
+         RDBMS entity."
+    ::= { rdbmsGroups 1 }
+
+----------------------------------------------------------------
+
+END
diff --git a/snmp_builder/mibs/RFC1213-MIB.mib b/snmp_builder/mibs/RFC1213-MIB.mib
new file mode 100644
index 0000000..408ccd7
--- /dev/null
+++ b/snmp_builder/mibs/RFC1213-MIB.mib
@@ -0,0 +1,2613 @@
+RFC1213-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        mgmt, NetworkAddress, IpAddress, Counter, Gauge,
+                TimeTicks
+            FROM RFC1155-SMI
+        OBJECT-TYPE
+                FROM RFC-1212;
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in [14];
+
+--  MIB-II (same prefix as MIB-I)
+
+mib-2      OBJECT IDENTIFIER ::= { mgmt 1 }
+
+-- textual conventions
+
+DisplayString ::=
+    OCTET STRING
+-- This data type is used to model textual information taken
+-- from the NVT ASCII character set.  By convention, objects
+-- with this syntax are declared as having
+
+--
+--      SIZE (0..255)
+
+PhysAddress ::=
+    OCTET STRING
+-- This data type is used to model media addresses.  For many
+-- types of media, this will be in a binary representation.
+-- For example, an ethernet address would be represented as
+-- a string of 6 octets.
+
+-- groups in MIB-II
+
+system       OBJECT IDENTIFIER ::= { mib-2 1 }
+
+interfaces   OBJECT IDENTIFIER ::= { mib-2 2 }
+
+at           OBJECT IDENTIFIER ::= { mib-2 3 }
+
+ip           OBJECT IDENTIFIER ::= { mib-2 4 }
+
+icmp         OBJECT IDENTIFIER ::= { mib-2 5 }
+
+tcp          OBJECT IDENTIFIER ::= { mib-2 6 }
+
+udp          OBJECT IDENTIFIER ::= { mib-2 7 }
+
+egp          OBJECT IDENTIFIER ::= { mib-2 8 }
+
+-- historical (some say hysterical)
+-- cmot      OBJECT IDENTIFIER ::= { mib-2 9 }
+
+transmission OBJECT IDENTIFIER ::= { mib-2 10 }
+
+snmp         OBJECT IDENTIFIER ::= { mib-2 11 }
+
+-- the System group
+
+-- Implementation of the System group is mandatory for all
+-- systems.  If an agent is not configured to have a value
+-- for any of these variables, a string of length 0 is
+-- returned.
+
+sysDescr OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..255))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A textual description of the entity.  This value
+            should include the full name and version
+            identification of the system's hardware type,
+            software operating-system, and networking
+            software.  It is mandatory that this only contain
+            printable ASCII characters."
+    ::= { system 1 }
+
+sysObjectID OBJECT-TYPE
+    SYNTAX  OBJECT IDENTIFIER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The vendor's authoritative identification of the
+            network management subsystem contained in the
+            entity.  This value is allocated within the SMI
+            enterprises subtree (1.3.6.1.4.1) and provides an
+            easy and unambiguous means for determining `what
+            kind of box' is being managed.  For example, if
+            vendor `Flintstones, Inc.' was assigned the
+            subtree 1.3.6.1.4.1.4242, it could assign the
+            identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
+            Router'."
+    ::= { system 2 }
+
+sysUpTime OBJECT-TYPE
+    SYNTAX  TimeTicks
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The time (in hundredths of a second) since the
+            network management portion of the system was last
+            re-initialized."
+    ::= { system 3 }
+
+sysContact OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..255))
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The textual identification of the contact person
+            for this managed node, together with information
+            on how to contact this person."
+    ::= { system 4 }
+
+sysName OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..255))
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An administratively-assigned name for this
+            managed node.  By convention, this is the node's
+            fully-qualified domain name."
+    ::= { system 5 }
+
+sysLocation OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..255))
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The physical location of this node (e.g.,
+            `telephone closet, 3rd floor')."
+    ::= { system 6 }
+
+sysServices OBJECT-TYPE
+    SYNTAX  INTEGER (0..127)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A value which indicates the set of services that
+            this entity primarily offers.
+
+            The value is a sum.  This sum initially takes the
+            value zero, Then, for each layer, L, in the range
+            1 through 7, that this node performs transactions
+            for, 2 raised to (L - 1) is added to the sum.  For
+            example, a node which performs primarily routing
+            functions would have a value of 4 (2^(3-1)).  In
+            contrast, a node which is a host offering
+            application services would have a value of 72
+            (2^(4-1) + 2^(7-1)).  Note that in the context of
+            the Internet suite of protocols, values should be
+            calculated accordingly:
+
+                 layer  functionality
+                     1  physical (e.g., repeaters)
+                     2  datalink/subnetwork (e.g., bridges)
+                     3  internet (e.g., IP gateways)
+                     4  end-to-end  (e.g., IP hosts)
+                     7  applications (e.g., mail relays)
+
+            For systems including OSI protocols, layers 5 and
+            6 may also be counted."
+    ::= { system 7 }
+
+-- the Interfaces group
+
+-- Implementation of the Interfaces group is mandatory for
+-- all systems.
+
+ifNumber OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of network interfaces (regardless of
+            their current state) present on this system."
+    ::= { interfaces 1 }
+
+-- the Interfaces table
+
+-- The Interfaces table contains information on the entity's
+-- interfaces.  Each interface is thought of as being
+-- attached to a `subnetwork'.  Note that this term should
+-- not be confused with `subnet' which refers to an
+-- addressing partitioning scheme used in the Internet suite
+-- of protocols.
+
+ifTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF IfEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of interface entries.  The number of
+            entries is given by the value of ifNumber."
+    ::= { interfaces 2 }
+
+ifEntry OBJECT-TYPE
+    SYNTAX  IfEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "An interface entry containing objects at the
+            subnetwork layer and below for a particular
+            interface."
+    INDEX   { ifIndex }
+    ::= { ifTable 1 }
+
+IfEntry ::=
+    SEQUENCE {
+        ifIndex
+            INTEGER,
+        ifDescr
+            DisplayString,
+        ifType
+            INTEGER,
+        ifMtu
+            INTEGER,
+        ifSpeed
+            Gauge,
+        ifPhysAddress
+            PhysAddress,
+        ifAdminStatus
+            INTEGER,
+        ifOperStatus
+            INTEGER,
+        ifLastChange
+            TimeTicks,
+        ifInOctets
+            Counter,
+        ifInUcastPkts
+            Counter,
+        ifInNUcastPkts
+            Counter,
+        ifInDiscards
+            Counter,
+        ifInErrors
+            Counter,
+        ifInUnknownProtos
+            Counter,
+        ifOutOctets
+            Counter,
+        ifOutUcastPkts
+            Counter,
+        ifOutNUcastPkts
+            Counter,
+        ifOutDiscards
+            Counter,
+        ifOutErrors
+            Counter,
+        ifOutQLen
+            Gauge,
+        ifSpecific
+            OBJECT IDENTIFIER
+    }
+
+ifIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A unique value for each interface.  Its value
+            ranges between 1 and the value of ifNumber.  The
+            value for each interface must remain constant at
+            least from one re-initialization of the entity's
+            network management system to the next re-
+            initialization."
+    ::= { ifEntry 1 }
+
+ifDescr OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..255))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A textual string containing information about the
+            interface.  This string should include the name of
+            the manufacturer, the product name and the version
+            of the hardware interface."
+    ::= { ifEntry 2 }
+
+ifType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),          -- none of the following
+                regular1822(2),
+                hdh1822(3),
+                ddn-x25(4),
+                rfc877-x25(5),
+                ethernet-csmacd(6),
+                iso88023-csmacd(7),
+                iso88024-tokenBus(8),
+                iso88025-tokenRing(9),
+                iso88026-man(10),
+                starLan(11),
+                proteon-10Mbit(12),
+                proteon-80Mbit(13),
+                hyperchannel(14),
+                fddi(15),
+                lapb(16),
+                sdlc(17),
+                ds1(18),           -- T-1
+                e1(19),            -- european equiv. of T-1
+                basicISDN(20),
+                primaryISDN(21),   -- proprietary serial
+                propPointToPointSerial(22),
+                ppp(23),
+                softwareLoopback(24),
+                eon(25),            -- CLNP over IP [11]
+                ethernet-3Mbit(26),
+                nsip(27),           -- XNS over IP
+                slip(28),           -- generic SLIP
+                ultra(29),          -- ULTRA technologies
+                ds3(30),            -- T-3
+                sip(31),            -- SMDS
+                frame-relay(32)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of interface, distinguished according to
+            the physical/link protocol(s) immediately `below'
+            the network layer in the protocol stack."
+    ::= { ifEntry 3 }
+
+ifMtu OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The size of the largest datagram which can be
+            sent/received on the interface, specified in
+            octets.  For interfaces that are used for
+            transmitting network datagrams, this is the size
+            of the largest network datagram that can be sent
+            on the interface."
+    ::= { ifEntry 4 }
+
+ifSpeed OBJECT-TYPE
+    SYNTAX  Gauge
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth
+            in bits per second.  For interfaces which do not
+            vary in bandwidth or for those where no accurate
+            estimation can be made, this object should contain
+            the nominal bandwidth."
+    ::= { ifEntry 5 }
+
+ifPhysAddress OBJECT-TYPE
+    SYNTAX  PhysAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The interface's address at the protocol layer
+            immediately `below' the network layer in the
+            protocol stack.  For interfaces which do not have
+
+            such an address (e.g., a serial line), this object
+            should contain an octet string of zero length."
+    ::= { ifEntry 6 }
+
+ifAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),       -- ready to pass packets
+                down(2),
+                testing(3)   -- in some test mode
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The desired state of the interface.  The
+            testing(3) state indicates that no operational
+            packets can be passed."
+    ::= { ifEntry 7 }
+
+ifOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),       -- ready to pass packets
+                down(2),
+                testing(3)   -- in some test mode
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The current operational state of the interface.
+            The testing(3) state indicates that no operational
+            packets can be passed."
+    ::= { ifEntry 8 }
+
+ifLastChange OBJECT-TYPE
+    SYNTAX  TimeTicks
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of sysUpTime at the time the interface
+            entered its current operational state.  If the
+            current state was entered prior to the last re-
+            initialization of the local network management
+            subsystem, then this object contains a zero
+            value."
+    ::= { ifEntry 9 }
+
+ifInOctets OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of octets received on the
+            interface, including framing characters."
+    ::= { ifEntry 10 }
+
+ifInUcastPkts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of subnetwork-unicast packets
+            delivered to a higher-layer protocol."
+    ::= { ifEntry 11 }
+
+ifInNUcastPkts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of non-unicast (i.e., subnetwork-
+            broadcast or subnetwork-multicast) packets
+            delivered to a higher-layer protocol."
+    ::= { ifEntry 12 }
+
+ifInDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of inbound packets which were chosen
+            to be discarded even though no errors had been
+            detected to prevent their being deliverable to a
+            higher-layer protocol.  One possible reason for
+            discarding such a packet could be to free up
+            buffer space."
+    ::= { ifEntry 13 }
+
+ifInErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of inbound packets that contained
+            errors preventing them from being deliverable to a
+            higher-layer protocol."
+    ::= { ifEntry 14 }
+
+ifInUnknownProtos OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of packets received via the interface
+            which were discarded because of an unknown or
+            unsupported protocol."
+    ::= { ifEntry 15 }
+
+ifOutOctets OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters."
+    ::= { ifEntry 16 }
+
+ifOutUcastPkts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of packets that higher-level
+            protocols requested be transmitted to a
+            subnetwork-unicast address, including those that
+            were discarded or not sent."
+    ::= { ifEntry 17 }
+
+ifOutNUcastPkts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of packets that higher-level
+            protocols requested be transmitted to a non-
+            unicast (i.e., a subnetwork-broadcast or
+            subnetwork-multicast) address, including those
+            that were discarded or not sent."
+    ::= { ifEntry 18 }
+
+ifOutDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of outbound packets which were chosen
+
+            to be discarded even though no errors had been
+            detected to prevent their being transmitted.  One
+            possible reason for discarding such a packet could
+            be to free up buffer space."
+    ::= { ifEntry 19 }
+
+ifOutErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of outbound packets that could not be
+            transmitted because of errors."
+    ::= { ifEntry 20 }
+
+ifOutQLen OBJECT-TYPE
+    SYNTAX  Gauge
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The length of the output packet queue (in
+            packets)."
+    ::= { ifEntry 21 }
+
+ifSpecific OBJECT-TYPE
+    SYNTAX  OBJECT IDENTIFIER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A reference to MIB definitions specific to the
+            particular media being used to realize the
+            interface.  For example, if the interface is
+            realized by an ethernet, then the value of this
+            object refers to a document defining objects
+            specific to ethernet.  If this information is not
+            present, its value should be set to the OBJECT
+            IDENTIFIER { 0 0 }, which is a syntatically valid
+            object identifier, and any conformant
+            implementation of ASN.1 and BER must be able to
+            generate and recognize this value."
+    ::= { ifEntry 22 }
+
+-- the Address Translation group
+
+-- Implementation of the Address Translation group is
+-- mandatory for all systems.  Note however that this group
+-- is deprecated by MIB-II. That is, it is being included
+
+-- solely for compatibility with MIB-I nodes, and will most
+-- likely be excluded from MIB-III nodes.  From MIB-II and
+-- onwards, each network protocol group contains its own
+-- address translation tables.
+
+-- The Address Translation group contains one table which is
+-- the union across all interfaces of the translation tables
+-- for converting a NetworkAddress (e.g., an IP address) into
+-- a subnetwork-specific address.  For lack of a better term,
+-- this document refers to such a subnetwork-specific address
+-- as a `physical' address.
+
+-- Examples of such translation tables are: for broadcast
+-- media where ARP is in use, the translation table is
+-- equivalent to the ARP cache; or, on an X.25 network where
+-- non-algorithmic translation to X.121 addresses is
+-- required, the translation table contains the
+-- NetworkAddress to X.121 address equivalences.
+
+atTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF AtEntry
+    ACCESS  not-accessible
+    STATUS  deprecated
+    DESCRIPTION
+            "The Address Translation tables contain the
+            NetworkAddress to `physical' address equivalences.
+            Some interfaces do not use translation tables for
+            determining address equivalences (e.g., DDN-X.25
+            has an algorithmic method); if all interfaces are
+            of this type, then the Address Translation table
+            is empty, i.e., has zero entries."
+    ::= { at 1 }
+
+atEntry OBJECT-TYPE
+    SYNTAX  AtEntry
+    ACCESS  not-accessible
+    STATUS  deprecated
+    DESCRIPTION
+            "Each entry contains one NetworkAddress to
+            `physical' address equivalence."
+    INDEX   { atIfIndex,
+              atNetAddress }
+    ::= { atTable 1 }
+
+AtEntry ::=
+    SEQUENCE {
+        atIfIndex
+            INTEGER,
+        atPhysAddress
+            PhysAddress,
+        atNetAddress
+            NetworkAddress
+    }
+
+atIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  deprecated
+    DESCRIPTION
+            "The interface on which this entry's equivalence
+            is effective.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value of
+            ifIndex."
+    ::= { atEntry 1 }
+
+atPhysAddress OBJECT-TYPE
+    SYNTAX  PhysAddress
+    ACCESS  read-write
+    STATUS  deprecated
+    DESCRIPTION
+            "The media-dependent `physical' address.
+
+            Setting this object to a null string (one of zero
+            length) has the effect of invaliding the
+            corresponding entry in the atTable object.  That
+            is, it effectively dissasociates the interface
+            identified with said entry from the mapping
+            identified with said entry.  It is an
+            implementation-specific matter as to whether the
+            agent removes an invalidated entry from the table.
+            Accordingly, management stations must be prepared
+            to receive tabular information from agents that
+            corresponds to entries not currently in use.
+            Proper interpretation of such entries requires
+            examination of the relevant atPhysAddress object."
+    ::= { atEntry 2 }
+
+atNetAddress OBJECT-TYPE
+    SYNTAX  NetworkAddress
+    ACCESS  read-write
+    STATUS  deprecated
+    DESCRIPTION
+            "The NetworkAddress (e.g., the IP address)
+            corresponding to the media-dependent `physical'
+            address."
+    ::= { atEntry 3 }
+
+-- the IP group
+
+-- Implementation of the IP group is mandatory for all
+-- systems.
+
+ipForwarding OBJECT-TYPE
+    SYNTAX  INTEGER {
+                forwarding(1),    -- acting as a gateway
+                not-forwarding(2) -- NOT acting as a gateway
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The indication of whether this entity is acting
+            as an IP gateway in respect to the forwarding of
+            datagrams received by, but not addressed to, this
+            entity.  IP gateways forward datagrams.  IP hosts
+            do not (except those source-routed via the host).
+
+            Note that for some managed nodes, this object may
+            take on only a subset of the values possible.
+            Accordingly, it is appropriate for an agent to
+            return a `badValue' response if a management
+            station attempts to change this object to an
+            inappropriate value."
+    ::= { ip 1 }
+
+ipDefaultTTL OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The default value inserted into the Time-To-Live
+            field of the IP header of datagrams originated at
+            this entity, whenever a TTL value is not supplied
+            by the transport layer protocol."
+    ::= { ip 2 }
+
+ipInReceives OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of input datagrams received from
+            interfaces, including those received in error."
+    ::= { ip 3 }
+
+ipInHdrErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input datagrams discarded due to
+            errors in their IP headers, including bad
+            checksums, version number mismatch, other format
+            errors, time-to-live exceeded, errors discovered
+            in processing their IP options, etc."
+    ::= { ip 4 }
+
+ipInAddrErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input datagrams discarded because
+            the IP address in their IP header's destination
+            field was not a valid address to be received at
+            this entity.  This count includes invalid
+            addresses (e.g., 0.0.0.0) and addresses of
+            unsupported Classes (e.g., Class E).  For entities
+            which are not IP Gateways and therefore do not
+            forward datagrams, this counter includes datagrams
+            discarded because the destination address was not
+            a local address."
+    ::= { ip 5 }
+
+ipForwDatagrams OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input datagrams for which this
+            entity was not their final IP destination, as a
+            result of which an attempt was made to find a
+            route to forward them to that final destination.
+            In entities which do not act as IP Gateways, this
+            counter will include only those packets which were
+            Source-Routed via this entity, and the Source-
+            Route option processing was successful."
+    ::= { ip 6 }
+
+ipInUnknownProtos OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of locally-addressed datagrams
+            received successfully but discarded because of an
+            unknown or unsupported protocol."
+    ::= { ip 7 }
+
+ipInDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of input IP datagrams for which no
+            problems were encountered to prevent their
+            continued processing, but which were discarded
+            (e.g., for lack of buffer space).  Note that this
+            counter does not include any datagrams discarded
+            while awaiting re-assembly."
+    ::= { ip 8 }
+
+ipInDelivers OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of input datagrams successfully
+            delivered to IP user-protocols (including ICMP)."
+    ::= { ip 9 }
+
+ipOutRequests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of IP datagrams which local IP
+            user-protocols (including ICMP) supplied to IP in
+            requests for transmission.  Note that this counter
+            does not include any datagrams counted in
+            ipForwDatagrams."
+    ::= { ip 10 }
+
+ipOutDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of output IP datagrams for which no
+
+            problem was encountered to prevent their
+            transmission to their destination, but which were
+            discarded (e.g., for lack of buffer space).  Note
+            that this counter would include datagrams counted
+            in ipForwDatagrams if any such packets met this
+            (discretionary) discard criterion."
+    ::= { ip 11 }
+
+ipOutNoRoutes OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of IP datagrams discarded because no
+            route could be found to transmit them to their
+            destination.  Note that this counter includes any
+            packets counted in ipForwDatagrams which meet this
+            `no-route' criterion.  Note that this includes any
+            datagarms which a host cannot route because all of
+            its default gateways are down."
+    ::= { ip 12 }
+
+ipReasmTimeout OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum number of seconds which received
+            fragments are held while they are awaiting
+            reassembly at this entity."
+    ::= { ip 13 }
+
+ipReasmReqds OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of IP fragments received which needed
+            to be reassembled at this entity."
+    ::= { ip 14 }
+
+ipReasmOKs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of IP datagrams successfully re-
+            assembled."
+    ::= { ip 15 }
+
+ipReasmFails OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of failures detected by the IP re-
+            assembly algorithm (for whatever reason: timed
+            out, errors, etc).  Note that this is not
+            necessarily a count of discarded IP fragments
+            since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments
+            by combining them as they are received."
+    ::= { ip 16 }
+
+ipFragOKs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of IP datagrams that have been
+            successfully fragmented at this entity."
+    ::= { ip 17 }
+
+ipFragFails OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of IP datagrams that have been
+            discarded because they needed to be fragmented at
+            this entity but could not be, e.g., because their
+            Don't Fragment flag was set."
+    ::= { ip 18 }
+
+ipFragCreates OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of IP datagram fragments that have
+            been generated as a result of fragmentation at
+            this entity."
+    ::= { ip 19 }
+
+-- the IP address table
+
+-- The IP address table contains this entity's IP addressing
+-- information.
+
+ipAddrTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF IpAddrEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The table of addressing information relevant to
+            this entity's IP addresses."
+    ::= { ip 20 }
+
+ipAddrEntry OBJECT-TYPE
+    SYNTAX  IpAddrEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The addressing information for one of this
+            entity's IP addresses."
+    INDEX   { ipAdEntAddr }
+    ::= { ipAddrTable 1 }
+
+IpAddrEntry ::=
+    SEQUENCE {
+        ipAdEntAddr
+            IpAddress,
+        ipAdEntIfIndex
+            INTEGER,
+        ipAdEntNetMask
+            IpAddress,
+        ipAdEntBcastAddr
+            INTEGER,
+        ipAdEntReasmMaxSize
+            INTEGER (0..65535)
+    }
+
+ipAdEntAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The IP address to which this entry's addressing
+            information pertains."
+    ::= { ipAddrEntry 1 }
+
+ipAdEntIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The index value which uniquely identifies the
+            interface to which this entry is applicable.  The
+            interface identified by a particular value of this
+            index is the same interface as identified by the
+            same value of ifIndex."
+    ::= { ipAddrEntry 2 }
+
+ipAdEntNetMask OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The subnet mask associated with the IP address of
+            this entry.  The value of the mask is an IP
+            address with all the network bits set to 1 and all
+            the hosts bits set to 0."
+    ::= { ipAddrEntry 3 }
+
+ipAdEntBcastAddr OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the least-significant bit in the IP
+            broadcast address used for sending datagrams on
+            the (logical) interface associated with the IP
+            address of this entry.  For example, when the
+            Internet standard all-ones broadcast address is
+            used, the value will be 1.  This value applies to
+            both the subnet and network broadcasts addresses
+            used by the entity on this (logical) interface."
+    ::= { ipAddrEntry 4 }
+
+ipAdEntReasmMaxSize OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The size of the largest IP datagram which this
+            entity can re-assemble from incoming IP fragmented
+            datagrams received on this interface."
+    ::= { ipAddrEntry 5 }
+
+-- the IP routing table
+
+-- The IP routing table contains an entry for each route
+-- presently known to this entity.
+
+ipRouteTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF IpRouteEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "This entity's IP Routing table."
+    ::= { ip 21 }
+
+ipRouteEntry OBJECT-TYPE
+    SYNTAX  IpRouteEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A route to a particular destination."
+    INDEX   { ipRouteDest }
+    ::= { ipRouteTable 1 }
+
+IpRouteEntry ::=
+    SEQUENCE {
+        ipRouteDest
+            IpAddress,
+        ipRouteIfIndex
+            INTEGER,
+        ipRouteMetric1
+            INTEGER,
+        ipRouteMetric2
+            INTEGER,
+        ipRouteMetric3
+            INTEGER,
+        ipRouteMetric4
+            INTEGER,
+        ipRouteNextHop
+            IpAddress,
+        ipRouteType
+            INTEGER,
+        ipRouteProto
+            INTEGER,
+        ipRouteAge
+            INTEGER,
+        ipRouteMask
+            IpAddress,
+        ipRouteMetric5
+            INTEGER,
+        ipRouteInfo
+            OBJECT IDENTIFIER
+    }
+
+ipRouteDest OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The destination IP address of this route.  An
+            entry with a value of 0.0.0.0 is considered a
+            default route.  Multiple routes to a single
+            destination can appear in the table, but access to
+            such multiple entries is dependent on the table-
+            access mechanisms defined by the network
+            management protocol in use."
+    ::= { ipRouteEntry 1 }
+
+ipRouteIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The index value which uniquely identifies the
+            local interface through which the next hop of this
+            route should be reached.  The interface identified
+            by a particular value of this index is the same
+            interface as identified by the same value of
+            ifIndex."
+    ::= { ipRouteEntry 2 }
+
+ipRouteMetric1 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The primary routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            ipRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { ipRouteEntry 3 }
+
+ipRouteMetric2 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            ipRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { ipRouteEntry 4 }
+
+ipRouteMetric3 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            ipRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { ipRouteEntry 5 }
+
+ipRouteMetric4 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            ipRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { ipRouteEntry 6 }
+
+ipRouteNextHop OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The IP address of the next hop of this route.
+            (In the case of a route bound to an interface
+            which is realized via a broadcast media, the value
+            of this field is the agent's IP address on that
+            interface.)"
+    ::= { ipRouteEntry 7 }
+
+ipRouteType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),        -- none of the following
+
+                invalid(2),      -- an invalidated route
+
+                                 -- route to directly
+                direct(3),       -- connected (sub-)network
+
+                                 -- route to a non-local
+                indirect(4)      -- host/network/sub-network
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of route.  Note that the values
+            direct(3) and indirect(4) refer to the notion of
+            direct and indirect routing in the IP
+            architecture.
+
+            Setting this object to the value invalid(2) has
+            the effect of invalidating the corresponding entry
+            in the ipRouteTable object.  That is, it
+            effectively dissasociates the destination
+            identified with said entry from the route
+            identified with said entry.  It is an
+            implementation-specific matter as to whether the
+            agent removes an invalidated entry from the table.
+            Accordingly, management stations must be prepared
+            to receive tabular information from agents that
+            corresponds to entries not currently in use.
+            Proper interpretation of such entries requires
+            examination of the relevant ipRouteType object."
+    ::= { ipRouteEntry 8 }
+
+ipRouteProto OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),       -- none of the following
+
+                                -- non-protocol information,
+                                -- e.g., manually configured
+                local(2),       -- entries
+
+                                -- set via a network
+                netmgmt(3),     -- management protocol
+
+                                -- obtained via ICMP,
+                icmp(4),        -- e.g., Redirect
+
+                                -- the remaining values are
+                                -- all gateway routing
+                                -- protocols
+                egp(5),
+                ggp(6),
+                hello(7),
+                rip(8),
+                is-is(9),
+                es-is(10),
+                ciscoIgrp(11),
+                bbnSpfIgp(12),
+                ospf(13),
+                bgp(14)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The routing mechanism via which this route was
+            learned.  Inclusion of values for gateway routing
+            protocols is not intended to imply that hosts
+            should support those protocols."
+    ::= { ipRouteEntry 9 }
+
+ipRouteAge OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of seconds since this route was last
+            updated or otherwise determined to be correct.
+            Note that no semantics of `too old' can be implied
+            except through knowledge of the routing protocol
+            by which the route was learned."
+    ::= { ipRouteEntry 10 }
+
+ipRouteMask OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicate the mask to be logical-ANDed with the
+            destination address before being compared to the
+            value in the ipRouteDest field.  For those systems
+            that do not support arbitrary subnet masks, an
+            agent constructs the value of the ipRouteMask by
+            determining whether the value of the correspondent
+            ipRouteDest field belong to a class-A, B, or C
+            network, and then using one of:
+
+                 mask           network
+                 255.0.0.0      class-A
+                 255.255.0.0    class-B
+                 255.255.255.0  class-C
+
+            If the value of the ipRouteDest is 0.0.0.0 (a
+            default route), then the mask value is also
+            0.0.0.0.  It should be noted that all IP routing
+            subsystems implicitly use this mechanism."
+    ::= { ipRouteEntry 11 }
+
+ipRouteMetric5 OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the
+            routing-protocol specified in the route's
+            ipRouteProto value.  If this metric is not used,
+            its value should be set to -1."
+    ::= { ipRouteEntry 12 }
+
+ipRouteInfo OBJECT-TYPE
+    SYNTAX  OBJECT IDENTIFIER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A reference to MIB definitions specific to the
+            particular routing protocol which is responsible
+            for this route, as determined by the value
+            specified in the route's ipRouteProto value.  If
+            this information is not present, its value should
+            be set to the OBJECT IDENTIFIER { 0 0 }, which is
+            a syntatically valid object identifier, and any
+            conformant implementation of ASN.1 and BER must be
+            able to generate and recognize this value."
+    ::= { ipRouteEntry 13 }
+
+-- the IP Address Translation table
+
+-- The IP address translation table contain the IpAddress to
+-- `physical' address equivalences.  Some interfaces do not
+-- use translation tables for determining address
+-- equivalences (e.g., DDN-X.25 has an algorithmic method);
+-- if all interfaces are of this type, then the Address
+-- Translation table is empty, i.e., has zero entries.
+
+ipNetToMediaTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF IpNetToMediaEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The IP Address Translation table used for mapping
+            from IP addresses to physical addresses."
+    ::= { ip 22 }
+
+ipNetToMediaEntry OBJECT-TYPE
+    SYNTAX  IpNetToMediaEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Each entry contains one IpAddress to `physical'
+            address equivalence."
+    INDEX   { ipNetToMediaIfIndex,
+              ipNetToMediaNetAddress }
+    ::= { ipNetToMediaTable 1 }
+
+IpNetToMediaEntry ::=
+    SEQUENCE {
+        ipNetToMediaIfIndex
+            INTEGER,
+        ipNetToMediaPhysAddress
+            PhysAddress,
+        ipNetToMediaNetAddress
+            IpAddress,
+        ipNetToMediaType
+            INTEGER
+    }
+
+ipNetToMediaIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The interface on which this entry's equivalence
+            is effective.  The interface identified by a
+            particular value of this index is the same
+            interface as identified by the same value of
+            ifIndex."
+    ::= { ipNetToMediaEntry 1 }
+
+ipNetToMediaPhysAddress OBJECT-TYPE
+    SYNTAX  PhysAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The media-dependent `physical' address."
+    ::= { ipNetToMediaEntry 2 }
+
+ipNetToMediaNetAddress OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The IpAddress corresponding to the media-
+            dependent `physical' address."
+    ::= { ipNetToMediaEntry 3 }
+
+ipNetToMediaType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),        -- none of the following
+                invalid(2),      -- an invalidated mapping
+                dynamic(3),
+                static(4)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The type of mapping.
+
+            Setting this object to the value invalid(2) has
+            the effect of invalidating the corresponding entry
+            in the ipNetToMediaTable.  That is, it effectively
+            dissasociates the interface identified with said
+            entry from the mapping identified with said entry.
+            It is an implementation-specific matter as to
+            whether the agent removes an invalidated entry
+            from the table.  Accordingly, management stations
+            must be prepared to receive tabular information
+            from agents that corresponds to entries not
+            currently in use.  Proper interpretation of such
+            entries requires examination of the relevant
+            ipNetToMediaType object."
+    ::= { ipNetToMediaEntry 4 }
+
+-- additional IP objects
+
+ipRoutingDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of routing entries which were chosen
+            to be discarded even though they are valid.  One
+            possible reason for discarding such an entry could
+            be to free-up buffer space for other routing
+
+            entries."
+    ::= { ip 23 }
+
+-- the ICMP group
+
+-- Implementation of the ICMP group is mandatory for all
+-- systems.
+
+icmpInMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of ICMP messages which the
+            entity received.  Note that this counter includes
+            all those counted by icmpInErrors."
+    ::= { icmp 1 }
+
+icmpInErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP messages which the entity
+            received but determined as having ICMP-specific
+            errors (bad ICMP checksums, bad length, etc.)."
+    ::= { icmp 2 }
+
+icmpInDestUnreachs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Destination Unreachable
+            messages received."
+    ::= { icmp 3 }
+
+icmpInTimeExcds OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Time Exceeded messages
+            received."
+    ::= { icmp 4 }
+
+icmpInParmProbs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Parameter Problem messages
+            received."
+    ::= { icmp 5 }
+
+icmpInSrcQuenchs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Source Quench messages
+            received."
+    ::= { icmp 6 }
+
+icmpInRedirects OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Redirect messages received."
+    ::= { icmp 7 }
+
+icmpInEchos OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Echo (request) messages
+            received."
+    ::= { icmp 8 }
+
+icmpInEchoReps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Echo Reply messages received."
+    ::= { icmp 9 }
+
+icmpInTimestamps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Timestamp (request) messages
+            received."
+    ::= { icmp 10 }
+
+icmpInTimestampReps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Timestamp Reply messages
+            received."
+    ::= { icmp 11 }
+
+icmpInAddrMasks OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Address Mask Request messages
+            received."
+    ::= { icmp 12 }
+
+icmpInAddrMaskReps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Address Mask Reply messages
+            received."
+    ::= { icmp 13 }
+
+icmpOutMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of ICMP messages which this
+            entity attempted to send.  Note that this counter
+            includes all those counted by icmpOutErrors."
+    ::= { icmp 14 }
+
+icmpOutErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP messages which this entity did
+            not send due to problems discovered within ICMP
+
+            such as a lack of buffers.  This value should not
+            include errors discovered outside the ICMP layer
+            such as the inability of IP to route the resultant
+            datagram.  In some implementations there may be no
+            types of error which contribute to this counter's
+            value."
+    ::= { icmp 15 }
+
+icmpOutDestUnreachs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Destination Unreachable
+            messages sent."
+    ::= { icmp 16 }
+
+icmpOutTimeExcds OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Time Exceeded messages sent."
+    ::= { icmp 17 }
+
+icmpOutParmProbs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Parameter Problem messages
+            sent."
+    ::= { icmp 18 }
+
+icmpOutSrcQuenchs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Source Quench messages sent."
+    ::= { icmp 19 }
+
+icmpOutRedirects OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Redirect messages sent.  For a
+
+            host, this object will always be zero, since hosts
+            do not send redirects."
+    ::= { icmp 20 }
+
+icmpOutEchos OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Echo (request) messages sent."
+    ::= { icmp 21 }
+
+icmpOutEchoReps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Echo Reply messages sent."
+    ::= { icmp 22 }
+
+icmpOutTimestamps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Timestamp (request) messages
+            sent."
+    ::= { icmp 23 }
+
+icmpOutTimestampReps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Timestamp Reply messages
+            sent."
+    ::= { icmp 24 }
+
+icmpOutAddrMasks OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Address Mask Request messages
+            sent."
+    ::= { icmp 25 }
+
+icmpOutAddrMaskReps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ICMP Address Mask Reply messages
+            sent."
+    ::= { icmp 26 }
+
+-- the TCP group
+
+-- Implementation of the TCP group is mandatory for all
+-- systems that implement the TCP.
+
+-- Note that instances of object types that represent
+-- information about a particular TCP connection are
+-- transient; they persist only as long as the connection
+-- in question.
+
+tcpRtoAlgorithm OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),    -- none of the following
+
+                constant(2), -- a constant rto
+                rsre(3),     -- MIL-STD-1778, Appendix B
+                vanj(4)      -- Van Jacobson's algorithm [10]
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The algorithm used to determine the timeout value
+            used for retransmitting unacknowledged octets."
+    ::= { tcp 1 }
+
+tcpRtoMin OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The minimum value permitted by a TCP
+            implementation for the retransmission timeout,
+            measured in milliseconds.  More refined semantics
+            for objects of this type depend upon the algorithm
+            used to determine the retransmission timeout.  In
+            particular, when the timeout algorithm is rsre(3),
+            an object of this type has the semantics of the
+            LBOUND quantity described in RFC 793."
+    ::= { tcp 2 }
+
+tcpRtoMax OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum value permitted by a TCP
+            implementation for the retransmission timeout,
+            measured in milliseconds.  More refined semantics
+            for objects of this type depend upon the algorithm
+            used to determine the retransmission timeout.  In
+            particular, when the timeout algorithm is rsre(3),
+            an object of this type has the semantics of the
+            UBOUND quantity described in RFC 793."
+    ::= { tcp 3 }
+
+tcpMaxConn OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The limit on the total number of TCP connections
+            the entity can support.  In entities where the
+            maximum number of connections is dynamic, this
+            object should contain the value -1."
+    ::= { tcp 4 }
+
+tcpActiveOpens OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of times TCP connections have made a
+            direct transition to the SYN-SENT state from the
+            CLOSED state."
+    ::= { tcp 5 }
+
+tcpPassiveOpens OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of times TCP connections have made a
+            direct transition to the SYN-RCVD state from the
+            LISTEN state."
+    ::= { tcp 6 }
+
+tcpAttemptFails OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of times TCP connections have made a
+            direct transition to the CLOSED state from either
+            the SYN-SENT state or the SYN-RCVD state, plus the
+            number of times TCP connections have made a direct
+            transition to the LISTEN state from the SYN-RCVD
+            state."
+    ::= { tcp 7 }
+
+tcpEstabResets OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of times TCP connections have made a
+            direct transition to the CLOSED state from either
+            the ESTABLISHED state or the CLOSE-WAIT state."
+    ::= { tcp 8 }
+
+tcpCurrEstab OBJECT-TYPE
+    SYNTAX  Gauge
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of TCP connections for which the
+            current state is either ESTABLISHED or CLOSE-
+            WAIT."
+    ::= { tcp 9 }
+
+tcpInSegs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of segments received, including
+            those received in error.  This count includes
+            segments received on currently established
+            connections."
+    ::= { tcp 10 }
+
+tcpOutSegs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of segments sent, including
+            those on current connections but excluding those
+            containing only retransmitted octets."
+    ::= { tcp 11 }
+
+tcpRetransSegs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of segments retransmitted - that
+            is, the number of TCP segments transmitted
+            containing one or more previously transmitted
+            octets."
+    ::= { tcp 12 }
+
+-- the TCP Connection table
+
+-- The TCP connection table contains information about this
+-- entity's existing TCP connections.
+
+tcpConnTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF TcpConnEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table containing TCP connection-specific
+            information."
+    ::= { tcp 13 }
+
+tcpConnEntry OBJECT-TYPE
+    SYNTAX  TcpConnEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Information about a particular current TCP
+            connection.  An object of this type is transient,
+            in that it ceases to exist when (or soon after)
+            the connection makes the transition to the CLOSED
+            state."
+    INDEX   { tcpConnLocalAddress,
+              tcpConnLocalPort,
+              tcpConnRemAddress,
+              tcpConnRemPort }
+    ::= { tcpConnTable 1 }
+
+TcpConnEntry ::=
+    SEQUENCE {
+        tcpConnState
+            INTEGER,
+        tcpConnLocalAddress
+            IpAddress,
+        tcpConnLocalPort
+            INTEGER (0..65535),
+        tcpConnRemAddress
+            IpAddress,
+        tcpConnRemPort
+            INTEGER (0..65535)
+    }
+
+tcpConnState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                closed(1),
+                listen(2),
+                synSent(3),
+                synReceived(4),
+                established(5),
+                finWait1(6),
+                finWait2(7),
+                closeWait(8),
+                lastAck(9),
+                closing(10),
+                timeWait(11),
+                deleteTCB(12)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The state of this TCP connection.
+
+            The only value which may be set by a management
+            station is deleteTCB(12).  Accordingly, it is
+            appropriate for an agent to return a `badValue'
+            response if a management station attempts to set
+            this object to any other value.
+
+            If a management station sets this object to the
+            value deleteTCB(12), then this has the effect of
+            deleting the TCB (as defined in RFC 793) of the
+            corresponding connection on the managed node,
+            resulting in immediate termination of the
+            connection.
+
+            As an implementation-specific option, a RST
+
+            segment may be sent from the managed node to the
+            other TCP endpoint (note however that RST segments
+            are not sent reliably)."
+    ::= { tcpConnEntry 1 }
+
+tcpConnLocalAddress OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The local IP address for this TCP connection.  In
+            the case of a connection in the listen state which
+            is willing to accept connections for any IP
+            interface associated with the node, the value
+            0.0.0.0 is used."
+    ::= { tcpConnEntry 2 }
+
+tcpConnLocalPort OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The local port number for this TCP connection."
+    ::= { tcpConnEntry 3 }
+
+tcpConnRemAddress OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The remote IP address for this TCP connection."
+    ::= { tcpConnEntry 4 }
+
+tcpConnRemPort OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The remote port number for this TCP connection."
+    ::= { tcpConnEntry 5 }
+
+-- additional TCP objects
+
+tcpInErrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of segments received in error
+            (e.g., bad TCP checksums)."
+    ::= { tcp 14 }
+
+tcpOutRsts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of TCP segments sent containing the
+            RST flag."
+    ::= { tcp 15 }
+
+-- the UDP group
+
+-- Implementation of the UDP group is mandatory for all
+-- systems which implement the UDP.
+
+udpInDatagrams OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of UDP datagrams delivered to
+            UDP users."
+    ::= { udp 1 }
+
+udpNoPorts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of received UDP datagrams for
+            which there was no application at the destination
+            port."
+    ::= { udp 2 }
+
+udpInErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of received UDP datagrams that could
+            not be delivered for reasons other than the lack
+            of an application at the destination port."
+    ::= { udp 3 }
+
+udpOutDatagrams OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of UDP datagrams sent from this
+            entity."
+    ::= { udp 4 }
+
+-- the UDP Listener table
+
+-- The UDP listener table contains information about this
+-- entity's UDP end-points on which a local application is
+-- currently accepting datagrams.
+
+udpTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF UdpEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table containing UDP listener information."
+    ::= { udp 5 }
+
+udpEntry OBJECT-TYPE
+    SYNTAX  UdpEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Information about a particular current UDP
+            listener."
+    INDEX   { udpLocalAddress, udpLocalPort }
+    ::= { udpTable 1 }
+
+UdpEntry ::=
+    SEQUENCE {
+        udpLocalAddress
+            IpAddress,
+        udpLocalPort
+            INTEGER (0..65535)
+    }
+
+udpLocalAddress OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The local IP address for this UDP listener.  In
+
+            the case of a UDP listener which is willing to
+            accept datagrams for any IP interface associated
+            with the node, the value 0.0.0.0 is used."
+    ::= { udpEntry 1 }
+
+udpLocalPort OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The local port number for this UDP listener."
+    ::= { udpEntry 2 }
+
+-- the EGP group
+
+-- Implementation of the EGP group is mandatory for all
+-- systems which implement the EGP.
+
+egpInMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP messages received without
+            error."
+    ::= { egp 1 }
+
+egpInErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP messages received that proved
+            to be in error."
+    ::= { egp 2 }
+
+egpOutMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of locally generated EGP
+            messages."
+    ::= { egp 3 }
+
+egpOutErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of locally generated EGP messages not
+            sent due to resource limitations within an EGP
+            entity."
+    ::= { egp 4 }
+
+-- the EGP Neighbor table
+
+-- The EGP neighbor table contains information about this
+-- entity's EGP neighbors.
+
+egpNeighTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF EgpNeighEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "The EGP neighbor table."
+    ::= { egp 5 }
+
+egpNeighEntry OBJECT-TYPE
+    SYNTAX  EgpNeighEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Information about this entity's relationship with
+            a particular EGP neighbor."
+    INDEX   { egpNeighAddr }
+    ::= { egpNeighTable 1 }
+
+EgpNeighEntry ::=
+    SEQUENCE {
+        egpNeighState
+            INTEGER,
+        egpNeighAddr
+            IpAddress,
+        egpNeighAs
+            INTEGER,
+        egpNeighInMsgs
+            Counter,
+        egpNeighInErrs
+            Counter,
+        egpNeighOutMsgs
+            Counter,
+        egpNeighOutErrs
+            Counter,
+        egpNeighInErrMsgs
+            Counter,
+        egpNeighOutErrMsgs
+            Counter,
+        egpNeighStateUps
+            Counter,
+        egpNeighStateDowns
+            Counter,
+        egpNeighIntervalHello
+            INTEGER,
+        egpNeighIntervalPoll
+            INTEGER,
+        egpNeighMode
+            INTEGER,
+        egpNeighEventTrigger
+            INTEGER
+    }
+
+egpNeighState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                idle(1),
+                acquisition(2),
+                down(3),
+                up(4),
+                cease(5)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The EGP state of the local system with respect to
+            this entry's EGP neighbor.  Each EGP state is
+            represented by a value that is one greater than
+            the numerical value associated with said state in
+            RFC 904."
+    ::= { egpNeighEntry 1 }
+
+egpNeighAddr OBJECT-TYPE
+    SYNTAX  IpAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The IP address of this entry's EGP neighbor."
+    ::= { egpNeighEntry 2 }
+
+egpNeighAs OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The autonomous system of this EGP peer.  Zero
+            should be specified if the autonomous system
+            number of the neighbor is not yet known."
+    ::= { egpNeighEntry 3 }
+
+egpNeighInMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP messages received without error
+            from this EGP peer."
+    ::= { egpNeighEntry 4 }
+
+egpNeighInErrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP messages received from this EGP
+            peer that proved to be in error (e.g., bad EGP
+            checksum)."
+    ::= { egpNeighEntry 5 }
+
+egpNeighOutMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of locally generated EGP messages to
+            this EGP peer."
+    ::= { egpNeighEntry 6 }
+
+egpNeighOutErrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of locally generated EGP messages not
+            sent to this EGP peer due to resource limitations
+            within an EGP entity."
+    ::= { egpNeighEntry 7 }
+
+egpNeighInErrMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP-defined error messages received
+            from this EGP peer."
+    ::= { egpNeighEntry 8 }
+
+egpNeighOutErrMsgs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP-defined error messages sent to
+            this EGP peer."
+    ::= { egpNeighEntry 9 }
+
+egpNeighStateUps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP state transitions to the UP
+            state with this EGP peer."
+    ::= { egpNeighEntry 10 }
+
+egpNeighStateDowns OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of EGP state transitions from the UP
+            state to any other state with this EGP peer."
+    ::= { egpNeighEntry 11 }
+
+egpNeighIntervalHello OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The interval between EGP Hello command
+            retransmissions (in hundredths of a second).  This
+            represents the t1 timer as defined in RFC 904."
+    ::= { egpNeighEntry 12 }
+
+egpNeighIntervalPoll OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The interval between EGP poll command
+
+            retransmissions (in hundredths of a second).  This
+            represents the t3 timer as defined in RFC 904."
+    ::= { egpNeighEntry 13 }
+
+egpNeighMode OBJECT-TYPE
+    SYNTAX  INTEGER { active(1), passive(2) }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The polling mode of this EGP entity, either
+            passive or active."
+    ::= { egpNeighEntry 14 }
+
+egpNeighEventTrigger OBJECT-TYPE
+    SYNTAX  INTEGER { start(1), stop(2) }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A control variable used to trigger operator-
+            initiated Start and Stop events.  When read, this
+            variable always returns the most recent value that
+            egpNeighEventTrigger was set to.  If it has not
+            been set since the last initialization of the
+            network management subsystem on the node, it
+            returns a value of `stop'.
+
+            When set, this variable causes a Start or Stop
+            event on the specified neighbor, as specified on
+            pages 8-10 of RFC 904.  Briefly, a Start event
+            causes an Idle peer to begin neighbor acquisition
+            and a non-Idle peer to reinitiate neighbor
+            acquisition.  A stop event causes a non-Idle peer
+            to return to the Idle state until a Start event
+            occurs, either via egpNeighEventTrigger or
+            otherwise."
+    ::= { egpNeighEntry 15 }
+
+-- additional EGP objects
+
+egpAs OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The autonomous system number of this EGP entity."
+    ::= { egp 6 }
+
+-- the Transmission group
+
+-- Based on the transmission media underlying each interface
+-- on a system, the corresponding portion of the Transmission
+-- group is mandatory for that system.
+
+-- When Internet-standard definitions for managing
+-- transmission media are defined, the transmission group is
+-- used to provide a prefix for the names of those objects.
+
+-- Typically, such definitions reside in the experimental
+-- portion of the MIB until they are "proven", then as a
+-- part of the Internet standardization process, the
+-- definitions are accordingly elevated and a new object
+-- identifier, under the transmission group is defined. By
+-- convention, the name assigned is:
+--
+--     type OBJECT IDENTIFIER    ::= { transmission number }
+--
+-- where "type" is the symbolic value used for the media in
+-- the ifType column of the ifTable object, and "number" is
+-- the actual integer value corresponding to the symbol.
+
+-- the SNMP group
+
+-- Implementation of the SNMP group is mandatory for all
+-- systems which support an SNMP protocol entity.  Some of
+-- the objects defined below will be zero-valued in those
+-- SNMP implementations that are optimized to support only
+-- those functions specific to either a management agent or
+-- a management station.  In particular, it should be
+-- observed that the objects below refer to an SNMP entity,
+-- and there may be several SNMP entities residing on a
+-- managed node (e.g., if the node is hosting acting as
+-- a management station).
+
+snmpInPkts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of Messages delivered to the
+            SNMP entity from the transport service."
+    ::= { snmp 1 }
+
+snmpOutPkts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Messages which were
+            passed from the SNMP protocol entity to the
+            transport service."
+    ::= { snmp 2 }
+
+snmpInBadVersions OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Messages which were
+            delivered to the SNMP protocol entity and were for
+            an unsupported SNMP version."
+    ::= { snmp 3 }
+
+snmpInBadCommunityNames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Messages delivered to
+            the SNMP protocol entity which used a SNMP
+            community name not known to said entity."
+    ::= { snmp 4 }
+
+snmpInBadCommunityUses OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Messages delivered to
+            the SNMP protocol entity which represented an SNMP
+            operation which was not allowed by the SNMP
+            community named in the Message."
+    ::= { snmp 5 }
+
+snmpInASNParseErrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of ASN.1 or BER errors
+            encountered by the SNMP protocol entity when
+            decoding received SNMP Messages."
+    ::= { snmp 6 }
+
+-- { snmp 7 } is not used
+
+snmpInTooBigs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field is
+            `tooBig'."
+    ::= { snmp 8 }
+
+snmpInNoSuchNames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field is
+            `noSuchName'."
+    ::= { snmp 9 }
+
+snmpInBadValues OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field is
+            `badValue'."
+    ::= { snmp 10 }
+
+snmpInReadOnlys OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number valid SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field is
+            `readOnly'.  It should be noted that it is a
+            protocol error to generate an SNMP PDU which
+            contains the value `readOnly' in the error-status
+            field, as such this object is provided as a means
+            of detecting incorrect implementations of the
+
+            SNMP."
+    ::= { snmp 11 }
+
+snmpInGenErrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field is
+            `genErr'."
+    ::= { snmp 12 }
+
+snmpInTotalReqVars OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of MIB objects which have been
+            retrieved successfully by the SNMP protocol entity
+            as the result of receiving valid SNMP Get-Request
+            and Get-Next PDUs."
+    ::= { snmp 13 }
+
+snmpInTotalSetVars OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of MIB objects which have been
+            altered successfully by the SNMP protocol entity
+            as the result of receiving valid SNMP Set-Request
+            PDUs."
+    ::= { snmp 14 }
+
+snmpInGetRequests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Get-Request PDUs which
+            have been accepted and processed by the SNMP
+            protocol entity."
+    ::= { snmp 15 }
+
+snmpInGetNexts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Get-Next PDUs which have
+            been accepted and processed by the SNMP protocol
+            entity."
+    ::= { snmp 16 }
+
+snmpInSetRequests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Set-Request PDUs which
+            have been accepted and processed by the SNMP
+            protocol entity."
+    ::= { snmp 17 }
+
+snmpInGetResponses OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Get-Response PDUs which
+            have been accepted and processed by the SNMP
+            protocol entity."
+    ::= { snmp 18 }
+
+snmpInTraps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Trap PDUs which have
+            been accepted and processed by the SNMP protocol
+            entity."
+    ::= { snmp 19 }
+
+snmpOutTooBigs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            generated by the SNMP protocol entity and for
+            which the value of the error-status field is
+            `tooBig.'"
+    ::= { snmp 20 }
+
+snmpOutNoSuchNames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            generated by the SNMP protocol entity and for
+            which the value of the error-status is
+            `noSuchName'."
+    ::= { snmp 21 }
+
+snmpOutBadValues OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            generated by the SNMP protocol entity and for
+            which the value of the error-status field is
+            `badValue'."
+    ::= { snmp 22 }
+
+-- { snmp 23 } is not used
+
+snmpOutGenErrs OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            generated by the SNMP protocol entity and for
+            which the value of the error-status field is
+            `genErr'."
+    ::= { snmp 24 }
+
+snmpOutGetRequests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Get-Request PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 25 }
+
+snmpOutGetNexts OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Get-Next PDUs which have
+            been generated by the SNMP protocol entity."
+    ::= { snmp 26 }
+
+snmpOutSetRequests OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Set-Request PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 27 }
+
+snmpOutGetResponses OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Get-Response PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 28 }
+
+snmpOutTraps OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of SNMP Trap PDUs which have
+            been generated by the SNMP protocol entity."
+    ::= { snmp 29 }
+
+snmpEnableAuthenTraps OBJECT-TYPE
+    SYNTAX  INTEGER { enabled(1), disabled(2) }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates whether the SNMP agent process is
+            permitted to generate authentication-failure
+            traps.  The value of this object overrides any
+            configuration information; as such, it provides a
+            means whereby all authentication-failure traps may
+            be disabled.
+
+            Note that it is strongly recommended that this
+            object be stored in non-volatile memory so that it
+            remains constant between re-initializations of the
+            network management system."
+    ::= { snmp 30 }
+
+END
diff --git a/snmp_builder/mibs/RFC1381-MIB.mib b/snmp_builder/mibs/RFC1381-MIB.mib
new file mode 100644
index 0000000..8faba30
--- /dev/null
+++ b/snmp_builder/mibs/RFC1381-MIB.mib
@@ -0,0 +1,1007 @@
+RFC1381-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        Counter
+                FROM RFC1155-SMI
+        transmission
+                FROM RFC1213-MIB
+        OBJECT-TYPE
+                FROM RFC-1212;
+
+                --  LAPB MIB
+
+lapb    OBJECT IDENTIFIER ::= { transmission 16 }
+
+PositiveInteger ::= INTEGER (0..2147483647)
+
+IfIndexType     ::= INTEGER (1..2147483647)
+-- IfIndexType specifies an index object for a table
+-- with entries that match entries in the MIB-II ifTable.
+-- The value of the index for the table will match the
+-- ifIndex entry for same interface in the ifTable.
+-- The values of this object range from 1 to ifNumber
+-- inclusive.
+
+-- ###########################################################
+--                      LAPB Admn Table
+-- ###########################################################
+
+-- Support of the lapbAdmnTable is mandatory for all
+-- agents of systems that implement LAPB.
+
+lapbAdmnTable   OBJECT-TYPE
+        SYNTAX  SEQUENCE OF LapbAdmnEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table contains objects that can be
+                changed to manage a LAPB interface.
+                Changing one of these parameters may take
+                effect in the operating LAPB immediately or
+                may wait until the interface is restarted
+                depending on the details of the
+                implementation.
+
+                Most of the objects in this read-write table
+                have corresponding read-only objects in the
+                lapbOperTable that return the current
+                operating value.
+
+                The operating values may be different from
+                these configured values if changed by XID
+                negotiation or if a configured parameter was
+                changed after the interface was started."
+        ::= { lapb 1 }
+
+lapbAdmnEntry   OBJECT-TYPE
+        SYNTAX  LapbAdmnEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Configured parameter values for a specific
+                LAPB."
+        INDEX { lapbAdmnIndex }
+        ::= { lapbAdmnTable 1 }
+
+LapbAdmnEntry ::= SEQUENCE {
+        lapbAdmnIndex
+                IfIndexType,
+        lapbAdmnStationType
+                INTEGER,
+        lapbAdmnControlField
+                INTEGER,
+        lapbAdmnTransmitN1FrameSize
+                PositiveInteger,
+        lapbAdmnReceiveN1FrameSize
+                PositiveInteger,
+        lapbAdmnTransmitKWindowSize
+                INTEGER,
+        lapbAdmnReceiveKWindowSize
+                INTEGER,
+        lapbAdmnN2RxmitCount
+        INTEGER,
+        lapbAdmnT1AckTimer
+
+                PositiveInteger,
+        lapbAdmnT2AckDelayTimer
+                PositiveInteger,
+        lapbAdmnT3DisconnectTimer
+                PositiveInteger,
+        lapbAdmnT4IdleTimer
+                PositiveInteger,
+        lapbAdmnActionInitiate
+                INTEGER,
+        lapbAdmnActionRecvDM
+                INTEGER
+        }
+
+lapbAdmnIndex   OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the LAPB interface."
+        ::= { lapbAdmnEntry 1 }
+
+lapbAdmnStationType     OBJECT-TYPE
+        SYNTAX  INTEGER {
+                dte (1),
+                dce (2),
+                dxe (3)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Identifies the desired station type of this
+                interface."
+        REFERENCE "ISO 7776 section 3.1"
+        DEFVAL { dte }
+        ::= { lapbAdmnEntry 2 }
+
+lapbAdmnControlField OBJECT-TYPE
+        SYNTAX  INTEGER {
+                modulo8 (1),
+                modulo128 (2)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The desired size of the sequence numbers
+                used to number frames."
+        REFERENCE "ISO 8885 Table 3, Name: HDLC Option - 10"
+        DEFVAL { modulo8 }
+        ::= { lapbAdmnEntry 3 }
+
+lapbAdmnTransmitN1FrameSize OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default maximum N1 frame size desired
+                in number of bits for a frame transmitted by
+                this DTE.  This excludes flags and 0 bits
+                inserted for transparency."
+        REFERENCE "ISO 8885 Table 3,
+                Name: Information Field length"
+        DEFVAL { 36000 } -- 4500 * 8; 802.5 Frame size
+        ::= { lapbAdmnEntry 4 }
+
+lapbAdmnReceiveN1FrameSize OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default maximum N1 frame size desired
+                in number of bits for a frame the DCE/remote
+                DTE transmits to this DTE.  This excludes
+                flags and 0 bits inserted for transparency."
+        DEFVAL { 36000  } -- 4500 * 8; 802.5 Frame size
+        ::= { lapbAdmnEntry 5 }
+
+lapbAdmnTransmitKWindowSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..127)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default transmit window size for this
+                Interface.  This is the maximum number of
+                unacknowledged sequenced PDUs that may be
+                outstanding from this DTE at any one time."
+        REFERENCE "ISO 8885 Table 3, Name: Window size"
+        DEFVAL { 7 }
+        ::= { lapbAdmnEntry 6 }
+
+lapbAdmnReceiveKWindowSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..127)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default receive window size for this
+                Interface.  This is the maximum number of
+
+                unacknowledged sequenced PDUs that may be
+                outstanding from the DCE/remote DTE at any
+                one time."
+        REFERENCE "ISO 8885 Table 3, Name: Window size"
+        DEFVAL { 7 }
+        ::= { lapbAdmnEntry 7 }
+
+lapbAdmnN2RxmitCount    OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default N2 retry counter for this
+                interface.  This specifies the number of
+                times a PDU will be resent after the T1
+                timer expires without an acknowledgement for
+                the PDU."
+        REFERENCE "ISO 8885 Table 3,
+                Name: Retransmission Attempts"
+        DEFVAL { 20 }
+        ::= { lapbAdmnEntry 8 }
+
+lapbAdmnT1AckTimer      OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default T1 timer for this interface.
+                This specifies the maximum time in
+                Milliseconds to wait for acknowledgment of a
+                PDU."
+        REFERENCE "ISO 8885 Table 3, Name:
+                Acknowledgement timer"
+        DEFVAL { 3000 }
+        ::= { lapbAdmnEntry 9 }
+
+lapbAdmnT2AckDelayTimer         OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The default T2 timer for this interface.
+                This specifies the maximum time in
+                Milliseconds to wait before sending an
+                acknowledgment for a sequenced PDU.  A value
+                of zero means there will be no delay in
+                acknowledgement generation."
+        REFERENCE "ISO 8885 Table 3,
+                Name: Reply delay timer"
+        DEFVAL { 0 }
+        ::= { lapbAdmnEntry 10 }
+
+lapbAdmnT3DisconnectTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T3 timer for this interface.  This
+                specifies the time in Milliseconds to wait
+                before considering the link disconnected.  A
+                value of zero indicates the link will be
+                considered disconnected upon completion of
+                the frame exchange to disconnect the link."
+        REFERENCE "ISO 7776 section 5.7.1.3"
+        DEFVAL { 60000 }
+        ::= { lapbAdmnEntry 11 }
+
+lapbAdmnT4IdleTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T4 timer for this interface.  This
+                specifies the maximum time in Milliseconds
+                to allow without frames being exchanged on
+                the data link.  A value of 2147483647
+                indicates no idle timer is being kept."
+        REFERENCE "ISO 7776 section 5.7.1.4"
+        DEFVAL { 2147483647 }
+        ::= { lapbAdmnEntry 12 }
+
+lapbAdmnActionInitiate OBJECT-TYPE
+        SYNTAX  INTEGER {
+        sendSABM (1),
+                sendDISC (2),
+                sendDM (3),
+                none (4),
+                other (5)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the action LAPB will take
+                to initiate link set-up."
+        DEFVAL { sendSABM }
+        ::= { lapbAdmnEntry 13 }
+
+lapbAdmnActionRecvDM OBJECT-TYPE
+        SYNTAX  INTEGER {
+                sendSABM (1),
+                sendDISC (2),
+                other (3)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the action LAPB will take
+                when it receives a DM response."
+        DEFVAL { sendSABM }
+        ::= { lapbAdmnEntry 14 }
+
+-- ###########################################################
+--                      LAPB operating parameters.
+-- ###########################################################
+
+-- Support of the lapbOperTable is mandatory for all
+-- agents of systems that implement LAPB.
+
+lapbOperTable   OBJECT-TYPE
+        SYNTAX  SEQUENCE OF LapbOperEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table contains configuration
+                information about interface parameters
+                currently set in the interface.  Many of
+                these objects have corresponding objects in
+        the lapbAdmnTable."
+        ::= { lapb 2 }
+
+lapbOperEntry   OBJECT-TYPE
+        SYNTAX  LapbOperEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Currently set parameter values for a
+                specific LAPB."
+        INDEX { lapbOperIndex }
+        ::= { lapbOperTable 1 }
+
+LapbOperEntry ::= SEQUENCE {
+        lapbOperIndex
+                IfIndexType,
+        lapbOperStationType
+
+                INTEGER,
+        lapbOperControlField
+                INTEGER,
+        lapbOperTransmitN1FrameSize
+                PositiveInteger,
+        lapbOperReceiveN1FrameSize
+                PositiveInteger,
+        lapbOperTransmitKWindowSize
+                INTEGER,
+        lapbOperReceiveKWindowSize
+                INTEGER,
+        lapbOperN2RxmitCount
+                INTEGER,
+        lapbOperT1AckTimer
+                PositiveInteger,
+        lapbOperT2AckDelayTimer
+                PositiveInteger,
+        lapbOperT3DisconnectTimer
+                PositiveInteger,
+        lapbOperT4IdleTimer
+                PositiveInteger,
+        lapbOperPortId
+                OBJECT IDENTIFIER,
+        lapbOperProtocolVersionId
+                OBJECT IDENTIFIER
+        }
+
+lapbOperIndex   OBJECT-TYPE
+   SYNTAX       IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the LAPB interface."
+        ::= { lapbOperEntry 1 }
+
+lapbOperStationType     OBJECT-TYPE
+        SYNTAX  INTEGER {
+                dte (1),
+                dce (2),
+                dxe (3)
+                }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Identifies the current operating station
+                type of this interface.  A value of dxe (3)
+                indicates XID negotiation has not yet taken
+                place."
+        REFERENCE "ISO 7776 section 3.1"
+        ::= { lapbOperEntry 2 }
+
+lapbOperControlField OBJECT-TYPE
+        SYNTAX  INTEGER {
+                modulo8 (1),
+                modulo128 (2)
+                }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current operating size of the sequence
+                numbers used to number frames."
+        REFERENCE "ISO 7776 section 3.3"
+        ::= { lapbOperEntry 3 }
+
+lapbOperTransmitN1FrameSize OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current operating N1 frame size used
+                for the maximum number of bits in a frame
+                this DTE can transmit.  This excludes flags
+                and 0 bits inserted for transparency."
+        REFERENCE "ISO 7776 section 5.7.3"
+        ::= { lapbOperEntry 4 }
+
+lapbOperReceiveN1FrameSize OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        -- See lapbOperTransmitN1FrameSize above
+        DESCRIPTION
+                "The current operating N1 frame size used
+                for the maximum number of bits in a frame
+                the DCE/remote DTE can transmit.  This
+                excludes flags and 0 bits inserted for
+                transparency."
+        ::= { lapbOperEntry 5 }
+
+lapbOperTransmitKWindowSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..127)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current PDU window size this Interface
+                uses to transmit.  This is the maximum
+
+                number of unacknowledged sequenced PDUs that
+                may be outstanding from this DTE at any one
+                time."
+        REFERENCE "ISO 7776 section 5.7.4"
+        ::= { lapbOperEntry 6 }
+
+lapbOperReceiveKWindowSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..127)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current receive PDU window size for
+                this Interface.  This is the maximum number
+                of unacknowledged sequenced PDUs that may be
+                outstanding from the DCE/remote DTE at any
+                one time."
+        REFERENCE "ISO 7776 section 5.7.4"
+        ::= { lapbOperEntry 7 }
+
+lapbOperN2RxmitCount    OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current N2 retry counter used for this
+                interface.  This specifies the number of
+                times a PDU will be resent after the T1
+                timer expires without an acknowledgement for
+                the PDU."
+        REFERENCE "ISO 7776 section 5.7.2"
+        ::= { lapbOperEntry 8 }
+
+lapbOperT1AckTimer      OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current T1 timer for this interface.
+                This specifies the maximum time in
+                Milliseconds to wait for acknowledgment of a
+                PDU."
+        REFERENCE "ISO 7776 section 5.7.1.1"
+        ::= { lapbOperEntry 9 }
+
+lapbOperT2AckDelayTimer         OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current T2 timer for this interface.
+                This specifies the maximum time in
+                Milliseconds to wait before sending an
+                acknowledgment for a sequenced PDU.  A value
+                of zero means there will be no delay in
+                acknowledgement generation."
+        REFERENCE "ISO 7776 section 5.7.1.2"
+        ::= { lapbOperEntry 10 }
+
+lapbOperT3DisconnectTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current T3 timer for this interface.
+                This specifies the time in Milliseconds to
+                wait before considering the link
+                disconnected.  A value of zero indicates the
+                link will be considered disconnected upon
+                completion of the frame exchange to
+                disconnect the link."
+        REFERENCE "ISO 7776 section 5.7.1.3"
+        ::= { lapbOperEntry 11 }
+
+lapbOperT4IdleTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The current T4 timer for this interface.
+                This specifies the maximum time in
+                Milliseconds to allow without frames being
+                exchanged on the data link.  A value of
+                2147483647 indicates no idle timer is being
+                kept."
+        REFERENCE "ISO 7776 section 5.7.1.4"
+        ::= { lapbOperEntry 12 }
+
+lapbOperPortId OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "This object identifies an instance of the
+                index object in the first group of objects
+                in the MIB specific to the physical device
+                or interface used to send and receive
+
+                frames.  If an agent does not support any
+                such objects, it should return nullSpec
+                OBJECT IDENTIFIER {0 0}."
+        ::= { lapbOperEntry 13 }
+
+lapbOperProtocolVersionId       OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "This object identifies the version of the
+                lapb protocol implemented by this
+                interface."
+        ::= { lapbOperEntry 14 }
+
+-- ###########################################################
+--                      LAPB    Flow Table
+-- ###########################################################
+
+-- Support of the lapbFlowTable is mandatory for all
+-- agents of systems that implement LAPB.
+
+lapbFlowTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF LapbFlowEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table defines the objects recorded by
+                LAPB to provide information about the
+                traffic flow through the interface."
+        ::= { lapb 3 }
+
+lapbFlowEntry OBJECT-TYPE
+        SYNTAX  LapbFlowEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "The information regarding the effects of
+                flow controls in LAPB."
+         INDEX { lapbFlowIfIndex }
+        ::= { lapbFlowTable 1 }
+
+LapbFlowEntry ::= SEQUENCE {
+        lapbFlowIfIndex
+                IfIndexType,
+        lapbFlowStateChanges
+                Counter,
+        lapbFlowChangeReason
+                INTEGER,
+        lapbFlowCurrentMode
+                INTEGER,
+        lapbFlowBusyDefers
+                Counter,
+        lapbFlowRejOutPkts
+                Counter,
+        lapbFlowRejInPkts
+                Counter,
+        lapbFlowT1Timeouts
+                Counter,
+        lapbFlowFrmrSent
+        OCTET STRING,
+        lapbFlowFrmrReceived
+                OCTET STRING,
+        lapbFlowXidReceived
+                OCTET STRING
+        }
+
+lapbFlowIfIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the LAPB Interface."
+        ::= { lapbFlowEntry 1 }
+
+lapbFlowStateChanges OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of LAPB State Changes, including
+                resets."
+        ::= { lapbFlowEntry 2 }
+
+lapbFlowChangeReason OBJECT-TYPE
+        SYNTAX  INTEGER {
+                notStarted (1),    -- Initial state
+                abmEntered (2),    -- SABM or UA
+                abmeEntered (3),   -- SABME or UA
+                abmReset (4),      -- SABM in ABM
+                abmeReset (5),     -- SABME in ABME
+                dmReceived (6),    -- DM Response
+                dmSent (7),        -- DM sent
+                discReceived (8),  -- DISC Response
+                discSent (9),      -- DISC Sent
+
+                frmrReceived (10), -- FRMR Received
+                frmrSent (11),     -- FRMR Sent
+                n2Timeout (12),    -- N2 Timer Expired
+                other (13)
+                  }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The reason for the most recent incrementing
+                of lapbFlowStateChanges.  A DM or DISC frame
+                generated to initiate link set-up does not
+                alter this object.  When the MIB-II object
+                ifOperStatus does not have a value of
+                testing, there exists a correlation between
+                this object and ifOperStatus.  IfOperStatus
+                will have a value of up when this object
+                contains:  abmEntered, abmeEntered,
+                abmReset, or abmeReset.  IfOperStatus will
+                have a value of down when this object has a
+                value of notStarted, or dmReceived through
+                n2Timeout.  There is no correlation when
+                this object has the value other."
+        ::= { lapbFlowEntry 3 }
+
+lapbFlowCurrentMode OBJECT-TYPE
+        SYNTAX  INTEGER {
+                disconnected (1),
+                        -- initial state or DISC received
+
+                linkSetup (2),
+                        -- SABM sent
+
+                frameReject (3),
+                        -- Invalid frame received and
+                        -- FRMR sent
+
+                disconnectRequest (4),
+                        -- DISC sent
+
+                informationTransfer (5),
+                        -- normal information transfer state
+                        -- SABM(E) sent and UA received, or
+                        -- SABM(E) received and UA sent
+
+                rejFrameSent (6),
+                        -- invalid NS received and REJ sent
+
+                waitingAcknowledgement (7),
+                        -- T1 expired and RR sent
+
+                stationBusy (8),
+                        -- RNR sent
+
+                remoteStationBusy (9),
+                        -- RNR received
+
+                bothStationsBusy (10),
+                        -- RNR received and RNR sent
+
+                waitingAckStationBusy (11),
+                        -- T1 expired, RNR sent
+
+                waitingAckRemoteBusy (12),
+                        -- T1 expired, RNR received
+
+                waitingAckBothBusy (13),
+                        -- T1 expired, RNR sent,
+                        -- and RNR received
+
+                rejFrameSentRemoteBusy (14),
+                        -- REJ sent and RNR received
+
+                xidFrameSent (15),
+                        -- XID frame sent
+
+                error (16),
+                        -- An error state other than
+                        -- a one defined above
+
+                other (17)
+                        --  A state not listed above
+                  }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The current condition of the conversation."
+        ::= { lapbFlowEntry 4 }
+
+lapbFlowBusyDefers OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times this device was unable
+                to transmit a frame due to a perceived
+                remote busy condition.  Busy conditions can
+
+                result from the receipt of an RNR from the
+                remote device, the lack of valid sequence
+                number space (window saturation), or other
+                conditions."
+        ::= { lapbFlowEntry 5 }
+
+lapbFlowRejOutPkts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of REJ or SREJ frames sent by
+                this station."
+        ::= { lapbFlowEntry 6 }
+
+lapbFlowRejInPkts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of REJ or SREJ frames received
+                by this station."
+        ::= { lapbFlowEntry 7 }
+
+lapbFlowT1Timeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times a re-transmission was
+                effected by the T1 Timer expiring."
+        ::= { lapbFlowEntry 8 }
+
+lapbFlowFrmrSent OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..7))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The Information Field of the FRMR most
+                recently sent.  If no FRMR has been sent
+                (the normal case) or the information isn't
+                available, this will be an OCTET STRING of
+                zero length."
+        REFERENCE "ISO 7776 Section 4.3.9, tables 7 and 8"
+        ::= { lapbFlowEntry 9 }
+
+lapbFlowFrmrReceived OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..7))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The Information Field of the FRMR most
+                recently received.  If no FRMR has been
+                received (the normal case) or the
+                information isn't available, this will be an
+                OCTET STRING of zero length."
+        REFERENCE "ISO 7776 Section 4.3.9, tables 7 and 8"
+        ::= { lapbFlowEntry 10 }
+
+lapbFlowXidReceived OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..8206))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The Information Field of the XID frame most
+                recently received.  If no XID frame has been
+                received, this will be an OCTET STRING of
+                zero length."
+        REFERENCE "ISO 8885"
+        ::= { lapbFlowEntry 11 }
+
+-- ###########################################################
+--                      LAPB    XID Table
+-- ###########################################################
+
+-- Support for the lapbXidTable is mandatory for all agents
+-- of systems that have a LAPB implementation using XID
+-- negotiation.  Agents of systems without XID negotiation
+-- support should not implement this table.
+
+lapbXidTable    OBJECT-TYPE
+        SYNTAX  SEQUENCE OF LapbXidEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table defines values to use for XID
+                negotiation that are not found in the
+                lapbAdmnTable.  This table is optional for
+                implementations that don't support XID and
+                mandatory for implementations that do
+                initiate XID negotiation."
+        ::= { lapb 4 }
+
+lapbXidEntry    OBJECT-TYPE
+        SYNTAX  LapbXidEntry
+   ACCESS       not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "XId negotiation parameter values for a
+                specific LAPB."
+        INDEX { lapbXidIndex }
+        ::= { lapbXidTable 1 }
+
+LapbXidEntry ::= SEQUENCE {
+        lapbXidIndex
+                IfIndexType,
+        lapbXidAdRIdentifier
+                OCTET STRING,
+        lapbXidAdRAddress
+                OCTET STRING,
+        lapbXidParameterUniqueIdentifier
+                OCTET STRING,
+        lapbXidGroupAddress
+                OCTET STRING,
+        lapbXidPortNumber
+                OCTET STRING,
+        lapbXidUserDataSubfield
+                OCTET STRING
+        }
+
+lapbXidIndex    OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the LAPB interface."
+        ::= { lapbXidEntry 1 }
+
+lapbXidAdRIdentifier OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of the Address Resolution
+                Identifier.  A zero length string indicates
+                no Identifier value has been assigned."
+        REFERENCE "ISO 8885 Table 2, Name: Identifier"
+        DEFVAL { ''h }
+        ::= { lapbXidEntry 2 }
+
+lapbXidAdRAddress OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of the Address Resolution
+                Address.  A zero length string indicates no
+                Address value has been assigned."
+        REFERENCE "ISO 8885 Table 2, Name: Address"
+        DEFVAL { ''h }
+        ::= { lapbXidEntry 3 }
+
+lapbXidParameterUniqueIdentifier OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of the parameter unique
+                Identifier.  A zero length string indicates
+                no Unique identifier value has been
+                assigned."
+        REFERENCE "ISO 8885 Table 3, Name: Identifier"
+        DEFVAL { ''h }
+        ::= { lapbXidEntry 4 }
+
+lapbXidGroupAddress OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of the parameter Group address.
+                A zero length string indicates no Group
+                address value has been assigned."
+        REFERENCE "ISO 8885 Table 3, Name: Group address"
+        DEFVAL { ''h }
+        ::= { lapbXidEntry 5 }
+
+lapbXidPortNumber OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The port number assigned for this link.  A
+                zero length string indicates no local port
+                number identifier has been assigned."
+        REFERENCE "ISO 8885 Table 3, Name: Port number"
+        DEFVAL { ''h }
+        ::= { lapbXidEntry 6 }
+
+lapbXidUserDataSubfield OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..8206))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "A user data subfield, if any, to be
+                transmitted in an XID frame.  A zero length
+                frame indicates no user data subfield has
+                been assigned.  The octet string should
+                include both the User data identifier and
+                User data field as shown in Figures 1 and
+                4."
+        REFERENCE "ISO 8885 section 4.3"
+        DEFVAL { ''h }
+        ::= { lapbXidEntry 7 }
+
+-- ###########################################################
+--                      LAPB protocol versions
+-- ###########################################################
+
+lapbProtocolVersion OBJECT IDENTIFIER
+        ::= { lapb 5 }
+
+lapbProtocolIso7776v1986 OBJECT IDENTIFIER
+        ::= { lapbProtocolVersion 1 }
+
+lapbProtocolCcittV1980 OBJECT IDENTIFIER
+        ::= { lapbProtocolVersion 2 }
+
+lapbProtocolCcittV1984 OBJECT IDENTIFIER
+        ::= { lapbProtocolVersion 3 }
+
+-- The following describes some of the MIB-II interface
+-- objects and their relationship with the objects in this
+-- MIB extension.
+
+-- ifDescr:  describes the interface.   It should include
+-- identification information for the physical line and a
+-- description of the network.  For connections to PDNs,
+-- it should name the PDN.
+
+-- ifMtu: the maximum number of octets an upper layer can
+-- pass to this interface as a single frame.
+
+-- ifSpeed:
+
+-- ifAdminStatus:
+
+-- ifOperStatus:
+
+-- ifLastChange: the last time the state of the interface
+-- changed.  A reset is considered an instantaneous change to
+-- the ndm state and back to abm or abme.  This will be the
+-- last time that lapbFlowChangeReason and lapbFlowChanges
+-- changed.
+
+-- ifInOctets: contains the number of octets
+-- received from the peer LAPB including FCS.
+
+-- ifInUcastPkts: contains the number of I-frames delivered
+-- by this interface to a higher layer interface.
+
+-- ifInDiscards: contains the number of received
+-- frames discarded because of internal conditions
+-- (such as lack of buffering).
+
+-- ifInErrors: contains the number of Invalid frames received.
+-- This does not have any relationship with the number REJ,
+-- or RNR frames sent or received.
+
+-- ifInUnknownProtos: contains the number of frames
+-- that were correct but were dropped because they
+-- were inappropriate for the current state.  This
+-- includes an invalid Poll bit, an unknown address,
+-- or other condition such as an RNR when connection
+-- not established.  This also includes the number of
+-- DISC or other frames that were ignored because the
+-- link was not established and this interface was not
+-- configured to perform link setup on that type frame.
+
+-- ifOutOctets: number of octets sent to peer including
+-- FCS octets.
+
+-- ifOutUcastPkts: number of I-frames received from
+-- a higher layer for transmission to peer.
+
+-- ifOutDiscards: number of frames to be sent that were
+-- dropped due to internal conditions such as buffering etc.
+
+-- ifOutErrors: number of transmissions that failed
+-- due to errors or were considered invalid by the receiver.
+-- This does not have any relationship with the number REJ,
+-- or RNR frames sent or received.
+
+-- ifOutQLen: number of frames waiting to be transmitted.
+
+-- This MIB does not provide any support for:
+--      Multilink procedure (MLP) in ISO 7776 section 6
+--      LLC Pbit timer
+--      LLC REJ timer
+--      LLC Busy State Timer 7.8.1.4
+
+-- ###########################################################
+
+END
diff --git a/snmp_builder/mibs/RFC1382-MIB.mib b/snmp_builder/mibs/RFC1382-MIB.mib
new file mode 100644
index 0000000..12c9d01
--- /dev/null
+++ b/snmp_builder/mibs/RFC1382-MIB.mib
@@ -0,0 +1,2627 @@
+RFC1382-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        Counter, Gauge, TimeTicks
+                FROM RFC1155-SMI
+        OBJECT-TYPE
+                FROM RFC-1212
+        DisplayString, transmission
+                FROM RFC1213-MIB
+        TRAP-TYPE
+                FROM RFC-1215
+        EntryStatus
+                FROM RFC1271-MIB
+        PositiveInteger,
+        IfIndexType
+                FROM RFC1381-MIB;
+
+x25     OBJECT IDENTIFIER ::= { transmission 5 }
+
+-- Support of the X25 subtree and all subtrees under it
+-- is mandatory for all agents of system that implement X.25.
+
+X121Address ::= OCTET STRING (SIZE(0..17))
+ -- 0 to 17 bytes in length containing the ASCII
+ -- characters [0-9], each octet contains one digit
+ -- of the address.
+
+-- ###########################################################
+--            X.25 Administration Table
+-- ###########################################################
+
+x25AdmnTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF X25AdmnEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "This table contains the administratively
+                set configuration parameters for an X.25
+                Packet Level Entity (PLE).
+
+               Most of the objects in this table have
+                corresponding objects in the x25OperTable.
+                This table contains the values as last set
+                by the administrator.  The x25OperTable
+                contains the values actually in use by an
+                X.25 PLE.
+
+                Changing an administrative value may or may
+                not change a current operating value.  The
+                operating value may not change until the
+                interface is restarted.  Some
+                implementations may change the values
+                immediately upon changing the administrative
+                table.  All implementations are required to
+                load the values from the administrative
+                table when initializing a PLE."
+        ::= { x25 1 }
+
+x25AdmnEntry OBJECT-TYPE
+        SYNTAX  X25AdmnEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Entries of x25AdmnTable."
+        INDEX { x25AdmnIndex }
+        ::= { x25AdmnTable 1 }
+
+X25AdmnEntry ::= SEQUENCE {
+        x25AdmnIndex
+                IfIndexType,
+        x25AdmnInterfaceMode
+                INTEGER,
+        x25AdmnMaxActiveCircuits
+                INTEGER,
+        x25AdmnPacketSequencing
+                INTEGER,
+        x25AdmnRestartTimer
+                PositiveInteger,
+     x25AdmnCallTimer
+                PositiveInteger,
+        x25AdmnResetTimer
+                PositiveInteger,
+        x25AdmnClearTimer
+                PositiveInteger,
+        x25AdmnWindowTimer
+                PositiveInteger,
+        x25AdmnDataRxmtTimer
+                PositiveInteger,
+        x25AdmnInterruptTimer
+                PositiveInteger,
+        x25AdmnRejectTimer
+                PositiveInteger,
+        x25AdmnRegistrationRequestTimer
+                PositiveInteger,
+        x25AdmnMinimumRecallTimer
+                PositiveInteger,
+        x25AdmnRestartCount
+                INTEGER,
+        x25AdmnResetCount
+                INTEGER,
+        x25AdmnClearCount
+                INTEGER,
+        x25AdmnDataRxmtCount
+                INTEGER,
+        x25AdmnRejectCount
+                INTEGER,
+        x25AdmnRegistrationRequestCount
+                INTEGER,
+        x25AdmnNumberPVCs
+                INTEGER,
+        x25AdmnDefCallParamId
+                OBJECT IDENTIFIER,
+        x25AdmnLocalAddress
+                X121Address,
+        x25AdmnProtocolVersionSupported
+                OBJECT IDENTIFIER
+        }
+
+x25AdmnIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+        "The ifIndex value for the X.25 Interface."
+        ::= { x25AdmnEntry 1 }
+
+x25AdmnInterfaceMode OBJECT-TYPE
+        SYNTAX  INTEGER {
+
+                        dte (1),
+                        dce (2),
+                        dxe (3)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Identifies DCE/DTE mode in which the
+                interface operates.  A value of dxe
+                indicates the mode will be determined by XID
+                negotiation."
+        REFERENCE "10733 5.9 interfaceMode"
+        ::= { x25AdmnEntry 2 }
+
+x25AdmnMaxActiveCircuits        OBJECT-TYPE
+        SYNTAX  INTEGER (0..4096)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The maximum number of circuits this PLE can
+                support; including PVCs."
+        REFERENCE "10733 5.9 maxActiveCircuits;
+                See ISO 8208, Section 3.7"
+        ::= { x25AdmnEntry 3 }
+
+x25AdmnPacketSequencing OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        modulo8 (1),
+                        modulo128 (2)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The modulus of the packet sequence number
+                space."
+        REFERENCE "10733 extendedPacketSequencing;
+                See ISO 8208 Section 7.1.1"
+        ::= { x25AdmnEntry 4 }
+
+x25AdmnRestartTimer OBJECT-TYPE
+     SYNTAX     PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T20 restart timer in milliseconds."
+        REFERENCE "10733 5.9 restartTime
+                See ISO 8208 Section 4.1, table 26"
+        ::= { x25AdmnEntry 5 }
+
+x25AdmnCallTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T21 Call timer in milliseconds."
+        REFERENCE "10733 callTime;
+                See ISO 8208 Section 5.2.1, table 26"
+        ::= { x25AdmnEntry 6 }
+
+x25AdmnResetTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T22 Reset timer in milliseconds."
+        REFERENCE "10733 resetTime;
+                See ISO 8208 Section 8.1, table 26"
+        ::= { x25AdmnEntry 7 }
+
+x25AdmnClearTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T23 Clear timer in milliseconds."
+        REFERENCE "10733 clearTime;
+                See ISO 8208 Section 5.5.1, table 26"
+        ::= { x25AdmnEntry 8 }
+
+x25AdmnWindowTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T24 window status transmission timer in
+                milliseconds.  A value of 2147483647
+                indicates no window timer in use."
+        REFERENCE "10733 5.10.1 windowTime (opt);
+                See ISO 8208 Section 11.2.2, table 26"
+        ::= { x25AdmnEntry 9 }
+
+x25AdmnDataRxmtTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T25 data retransmission timer in
+
+                milliseconds.  A value of 2147483647
+                indicates no data retransmission timer in
+                use."
+        REFERENCE "10733 5.10.1 dataRetransmissionTime (opt);
+                See ISO 8208 Section 11.2.1, table 26"
+        ::= { x25AdmnEntry 10 }
+
+x25AdmnInterruptTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T26 interrupt timer in milliseconds.  A
+                value of 2147483647 indicates no interrupt
+                timer in use."
+        REFERENCE "10733 interruptTime;
+                See ISO 8208 Section 6.8.1, table 26"
+        ::= { x25AdmnEntry 11 }
+
+x25AdmnRejectTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T27 Reject retransmission timer in
+                milliseconds.  A value of 2147483647
+                indicates no reject timer in use."
+        REFERENCE "10733 5.10.1 dataRejectTime (opt);
+                See ISO 8208 Section 13.4.1, table 26"
+        ::= { x25AdmnEntry 12 }
+
+x25AdmnRegistrationRequestTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The T28 registration timer in milliseconds.
+                A value of 2147483647 indicates no
+                registration timer in use."
+        REFERENCE "10733 5.8.1 registrationRequestTime (opt)
+                See ISO 8208    Section 13.1.1.1, table 26"
+        ::= { x25AdmnEntry 13 }
+
+x25AdmnMinimumRecallTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Minimum time interval between unsuccessful
+                call attempts in milliseconds."
+        REFERENCE "10733 5.9 minimum RecallTimer"
+        ::= { x25AdmnEntry 14 }
+
+x25AdmnRestartCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The R20 restart retransmission count."
+        REFERENCE "10733 5.9 restartCount;
+                See ISO 8208    Section 4.1, table 27"
+        ::= { x25AdmnEntry 15 }
+
+x25AdmnResetCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The r22 Reset retransmission count."
+        REFERENCE "10733 resetCount;
+                See section ISO 8208 8.1, table 27"
+        ::= { x25AdmnEntry 16 }
+
+x25AdmnClearCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+        "The r23 Clear retransmission count."
+        REFERENCE "10733 clearCount;
+                See ISO 8208 Section 5.5.1, table 27"
+        ::= { x25AdmnEntry 17 }
+
+x25AdmnDataRxmtCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The R25 Data retransmission count.  This
+                value is irrelevant if the
+                x25AdmnDataRxmtTimer indicates no timer in
+                use."
+        REFERENCE "10733 5.10.1 dataRetransmissionCount (opt)
+                See ISO 8208 Section 11.2.1, table 27"
+        ::= { x25AdmnEntry 18 }
+
+x25AdmnRejectCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The R27 reject retransmission count.  This
+                value is irrelevant if the
+                x25AdmnRejectTimer indicates no timer in
+                use."
+        REFERENCE "10733 5.10.1 dataRejectCount (opt)"
+        ::= { x25AdmnEntry 19 }
+
+x25AdmnRegistrationRequestCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The R28 Registration retransmission Count.
+                This value is irrelevant if the
+                x25AdmnRegistrationRequestTimer indicates no
+                timer in use."
+        REFERENCE "10733 5.8.1 registrationRequestCount (opt);
+                See ISO 8208    Section 13.1.1.1, table 27"
+        ::= { x25AdmnEntry 20 }
+
+x25AdmnNumberPVCs OBJECT-TYPE
+        SYNTAX  INTEGER (0..4096)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of PVC configured for this PLE.
+                The PVCs use channel numbers from 1 to this
+                number."
+        ::= { x25AdmnEntry 21 }
+
+x25AdmnDefCallParamId OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the instance of the
+                x25CallParmIndex for the entry in the
+                x25CallParmTable which contains the default
+                call parameters for this PLE."
+        ::= { x25AdmnEntry 22 }
+
+x25AdmnLocalAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The local address for this PLE subnetwork.
+                A zero length address maybe returned by PLEs
+                that only support PVCs."
+        REFERENCE "10733 5.9 localDTEAddress"
+        ::= { x25AdmnEntry 23 }
+
+x25AdmnProtocolVersionSupported OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Identifies the version of the X.25 protocol
+                this interface should support.  Object
+                identifiers for common versions are defined
+                below in the x25ProtocolVersion subtree."
+        REFERENCE "10733 5.9 protocolVersionSupported"
+        ::= { x25AdmnEntry 24 }
+
+-- ###########################################################
+--            X.25 Operational Table
+-- ###########################################################
+
+x25OperTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF X25OperEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "The operation parameters in use by the X.25
+                PLE."
+        ::= { x25 2 }
+
+x25OperEntry OBJECT-TYPE
+        SYNTAX  X25OperEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Entries of x25OperTable."
+        INDEX { x25OperIndex }
+        ::= { x25OperTable 1 }
+
+X25OperEntry ::= SEQUENCE {
+        x25OperIndex
+                IfIndexType,
+        x25OperInterfaceMode
+
+                INTEGER,
+        x25OperMaxActiveCircuits
+                INTEGER,
+        x25OperPacketSequencing
+                INTEGER,
+        x25OperRestartTimer
+                PositiveInteger,
+        x25OperCallTimer
+                PositiveInteger,
+        x25OperResetTimer
+                PositiveInteger,
+        x25OperClearTimer
+                PositiveInteger,
+        x25OperWindowTimer
+                PositiveInteger,
+        x25OperDataRxmtTimer
+                PositiveInteger,
+        x25OperInterruptTimer
+                PositiveInteger,
+        x25OperRejectTimer
+                PositiveInteger,
+     x25OperRegistrationRequestTimer
+                PositiveInteger,
+        x25OperMinimumRecallTimer
+                PositiveInteger,
+        x25OperRestartCount
+                INTEGER,
+        x25OperResetCount
+                INTEGER,
+        x25OperClearCount
+                INTEGER,
+        x25OperDataRxmtCount
+                INTEGER,
+        x25OperRejectCount
+                INTEGER,
+        x25OperRegistrationRequestCount
+                INTEGER,
+        x25OperNumberPVCs
+                INTEGER,
+        x25OperDefCallParamId
+                OBJECT IDENTIFIER,
+        x25OperLocalAddress
+                X121Address,
+        x25OperDataLinkId
+                OBJECT IDENTIFIER,
+        x25OperProtocolVersionSupported
+                OBJECT IDENTIFIER
+        }
+
+x25OperIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the X.25 interface."
+        ::= { x25OperEntry 1 }
+
+x25OperInterfaceMode OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        dte (1),
+                        dce (2),
+                        dxe (3)
+                }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+        "Identifies DCE/DTE mode in which the
+                interface operates.  A value of dxe
+                indicates the role will be determined by XID
+                negotiation at the Link Layer and that
+                negotiation has not yet taken place."
+        REFERENCE "10733 5.9 interfaceMode"
+        ::= { x25OperEntry 2 }
+
+x25OperMaxActiveCircuits        OBJECT-TYPE
+        SYNTAX  INTEGER (0..4096)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Maximum number of circuits this PLE can
+                support."
+        REFERENCE "10733 5.9 maxActiveCircuits
+                See ISO 8208, Section 3.7"
+        ::= { x25OperEntry 3 }
+
+x25OperPacketSequencing OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        modulo8 (1),
+                        modulo128 (2)
+                }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The modulus of the packet sequence number
+                space."
+        REFERENCE "10733 extendedPacketSequencing;
+                See ISO 8208    Section 7.1.1"
+        ::= { x25OperEntry 4 }
+
+x25OperRestartTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T20 restart timer in milliseconds."
+        REFERENCE "10733 5.9 restartTime;
+                See ISO 8208    Section 4.1, table 26"
+        ::= { x25OperEntry 5 }
+
+x25OperCallTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T21 Call timer in milliseconds."
+        REFERENCE "10733 callTime;
+                See ISO 8208 Section 5.2.1, table 26"
+        ::= { x25OperEntry 6 }
+
+x25OperResetTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T22 Reset timer in milliseconds."
+        REFERENCE "10733 resetTime;
+                See ISO 8208    Section 8.1, table 26"
+        ::= { x25OperEntry 7 }
+
+x25OperClearTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T23 Clear timer in milliseconds."
+        REFERENCE "10733 clearTime;
+                See ISO 8208 Section 5.5.1, table 26"
+        ::= { x25OperEntry 8 }
+
+x25OperWindowTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T24 window status transmission timer
+
+                milliseconds.  A value of 2147483647
+                indicates no window timer in use."
+        REFERENCE "10733 5.10.1 windowTime (opt);
+                See ISO 8208 Section 11.2.2, table 26"
+        ::= { x25OperEntry 9 }
+
+x25OperDataRxmtTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T25 Data Retransmission timer in
+                milliseconds.  A value of 2147483647
+                indicates no data retransmission timer in
+                use."
+        REFERENCE "10733 5.10.1 dataRetransmissionTime (opt);
+                See ISO 8208 Section 11.2.1, table 26"
+        ::= { x25OperEntry 10 }
+
+x25OperInterruptTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T26 Interrupt timer in milliseconds.  A
+                value of 2147483647 indicates interrupts are
+                not being used."
+        REFERENCE "10733 interruptTime;
+                See ISO 8208 Section 6.8.1, table 26"
+        ::= { x25OperEntry 11 }
+
+x25OperRejectTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T27 Reject retransmission timer in
+                milliseconds.  A value of 2147483647
+                indicates no reject timer in use."
+        REFERENCE "10733 5.10.1 dataRejectTime (opt);
+                See ISO 8208 Section 13.4.1, table 26"
+        ::= { x25OperEntry 12 }
+
+x25OperRegistrationRequestTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The T28 registration timer in milliseconds.
+                A value of 2147483647 indicates no
+                registration timer in use."
+        REFERENCE "10733 5.8.1 registrationRequestTime (opt);
+                See ISO 8208    Section 13.1.1.1, table 26"
+        ::= { x25OperEntry 13 }
+
+x25OperMinimumRecallTimer OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Minimum time interval between unsuccessful
+                call attempts in milliseconds."
+        REFERENCE "10733 5.9 minimum RecallTimer"
+        ::= { x25OperEntry 14 }
+
+x25OperRestartCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The R20 restart retransmission count."
+        REFERENCE "10733 5.9 restartCount
+                See ISO 8208    Section 4.1, table 27"
+        ::= { x25OperEntry 15 }
+
+x25OperResetCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The r22 Reset retransmission count."
+        REFERENCE "10733 resetCount;
+                See section ISO 8208 8.1, table 27"
+        ::= { x25OperEntry 16 }
+
+x25OperClearCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The r23 Clear retransmission count."
+        REFERENCE "10733 clearCount;
+                See ISO 8208 Section 5.5.1, table 27"
+        ::= { x25OperEntry 17 }
+
+x25OperDataRxmtCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The R25 Data retransmission count.  This
+                value is undefined if the
+                x25OperDataRxmtTimer indicates no timer in
+                use."
+        REFERENCE "10733 5.10.1 dataRetransmissionCount (opt);
+                See ISO 8208 Section 11.2.1, table 27"
+        ::= { x25OperEntry 18 }
+
+x25OperRejectCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The R27 reject retransmission count.  This
+                value is undefined if the x25OperRejectTimer
+                indicates no timer in use."
+        REFERENCE "10733 5.10.1 dataRejectCount (opt)"
+        ::= { x25OperEntry 19 }
+
+x25OperRegistrationRequestCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The R28 Registration retransmission Count.
+                This value is undefined if the
+                x25OperREgistrationRequestTimer indicates no
+                timer in use."
+        REFERENCE "10733 5.8.1 registrationRequestCount (opt);
+                See ISO 8208    Section 13.1.1.1, table 27"
+        ::= { x25OperEntry 20 }
+
+x25OperNumberPVCs OBJECT-TYPE
+        SYNTAX  INTEGER (0..4096)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of PVC configured for this PLE.
+                The PVCs use channel numbers from 1 to this
+                number."
+        ::= { x25OperEntry 21 }
+
+x25OperDefCallParamId OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the instance of the
+                x25CallParmIndex for the entry in the
+                x25CallParmTable that contains the default
+                call parameters for this PLE."
+        ::= { x25OperEntry 22 }
+
+x25OperLocalAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The local address for this PLE subnetwork.
+                A zero length address maybe returned by PLEs
+                that only support PVCs."
+        REFERENCE "10733 5.9 localDTEAddress"
+        ::= { x25OperEntry 23 }
+
+x25OperDataLinkId OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the instance of the index
+                object in the first table of the most device
+                specific MIB for the interface used by this
+                PLE."
+        ::= { x25OperEntry 24 }
+
+x25OperProtocolVersionSupported OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "Identifies the version of the X.25 protocol
+                this interface supports.  Object identifiers
+                for common versions are defined below in the
+                x25ProtocolVersion subtree."
+        REFERENCE "10733 5.9 protocolVersionSupported"
+        ::= { x25OperEntry 25 }
+
+--      MIB-II also provides:
+
+-- ifDescr:
+-- On an X.25 interface this must include sufficient
+
+-- information to enable the system's administrator
+-- to determine the appropriate configuration
+-- information on a system having multiple X.25
+-- subnetworks.
+
+-- ifType: ddn-x25 or rfc877-x25
+--      an interface of type ddn-x25 will use an algorithm to
+--      translate between X.121 address and IP addresses.
+--      An interface of type rfc877-x25 will use a
+--      configuration table to translate between X.121
+--      addresses and IP addresses.
+
+-- ifMtu: the maximum PDU a higher layer can pass to X.25 or
+-- receive from X.25
+
+-- ifSpeed:
+-- This will be the value of the local clock for this line.
+-- A value of zero indicates external clocking.
+
+-- ifAdminStatus:
+
+-- ifOperStatus
+
+-- ifLastChange
+
+-- ###########################################################
+--            X.25 Statistics Table
+-- ###########################################################
+
+x25StatTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF X25StatEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Statistics information about this X.25
+                PLE."
+        ::= { x25 3 }
+
+x25StatEntry OBJECT-TYPE
+        SYNTAX  X25StatEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                 "Entries of the x25StatTable."
+                 INDEX { x25StatIndex }
+        ::= { x25StatTable 1 }
+
+X25StatEntry ::= SEQUENCE {
+        x25StatIndex
+                IfIndexType,
+        x25StatInCalls
+                Counter,
+        x25StatInCallRefusals
+                Counter,
+        x25StatInProviderInitiatedClears
+                Counter,
+        x25StatInRemotelyInitiatedResets
+                Counter,
+        x25StatInProviderInitiatedResets
+                Counter,
+        x25StatInRestarts
+                Counter,
+        x25StatInDataPackets
+                Counter,
+        x25StatInAccusedOfProtocolErrors
+                Counter,
+        x25StatInInterrupts
+                Counter,
+        x25StatOutCallAttempts
+                Counter,
+        x25StatOutCallFailures
+                Counter,
+        x25StatOutInterrupts
+                Counter,
+        x25StatOutDataPackets
+                Counter,
+        x25StatOutgoingCircuits
+                Gauge,
+        x25StatIncomingCircuits
+                Gauge,
+        x25StatTwowayCircuits
+                Gauge,
+        x25StatRestartTimeouts
+                Counter,
+        x25StatCallTimeouts
+                Counter,
+        x25StatResetTimeouts
+                Counter,
+        x25StatClearTimeouts
+                Counter,
+        x25StatDataRxmtTimeouts
+                Counter,
+        x25StatInterruptTimeouts
+                Counter,
+        x25StatRetryCountExceededs
+
+                Counter,
+        x25StatClearCountExceededs
+                Counter
+        }
+
+x25StatIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the X.25 interface."
+        ::= { x25StatEntry 1 }
+
+x25StatInCalls OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of incoming calls received."
+        ::= { x25StatEntry 2 }
+
+x25StatInCallRefusals OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of incoming calls refused.  This
+                includes calls refused by the PLE and by
+                higher layers.  This also includes calls
+                cleared because of restricted fast select."
+        ::= { x25StatEntry 3 }
+
+x25StatInProviderInitiatedClears        OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of clear requests with a cause
+                code other than DTE initiated."
+                REFERENCE "10733 providerInitiatedDisconnect"
+        ::= { x25StatEntry 4 }
+
+x25StatInRemotelyInitiatedResets        OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of reset requests received with
+
+                cause code DTE initiated."
+        REFERENCE "10733 remotelyInitiatedResets"
+        ::= { x25StatEntry 5 }
+
+x25StatInProviderInitiatedResets        OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of reset requests received with
+                cause code other than DTE initiated."
+        REFERENCE "10733 ProviderInitiatedResets"
+        ::= { x25StatEntry 6 }
+
+x25StatInRestarts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of remotely initiated (including
+                provider initiated) restarts experienced by
+                the PLE excluding the restart associated
+                with bringing up the PLE interface.  This
+                only counts restarts received when the PLE
+                already has an established connection with
+                the remove PLE."
+        REFERENCE "10733 5.9 remotelyInitiatedRestarts"
+        ::= { x25StatEntry 7 }
+
+x25StatInDataPackets    OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of data packets received."
+                REFERENCE "10733 5.9 dataPacketsReceived."
+        ::= { x25StatEntry 8 }
+
+x25StatInAccusedOfProtocolErrors        OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of packets received containing a
+                procedure error cause code.  These include
+                clear, reset, restart, or diagnostic
+                packets."
+        REFERENCE "CD 10733 5.9 accusedOfProtocolError"
+        ::= { x25StatEntry 9 }
+
+x25StatInInterrupts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of interrupt packets received by
+                the PLE or over the PVC/VC."
+        REFERENCE "10733 interruptPacketsReceived"
+        ::= { x25StatEntry 10 }
+
+x25StatOutCallAttempts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of calls attempted."
+        REFERENCE "10733 5.9 callAttempts"
+        ::= { x25StatEntry 11 }
+
+x25StatOutCallFailures OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of call attempts which failed.
+                This includes calls that were cleared
+                because of restrictive fast select."
+        ::= { x25StatEntry 12 }
+
+x25StatOutInterrupts    OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of interrupt packets send by the
+                PLE or over the PVC/VC."
+        REFERENCE "10733 InterruptPacketsSent"
+        ::= { x25StatEntry 13 }
+
+x25StatOutDataPackets   OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of data packets sent by this
+                PLE."
+        REFERENCE "10733 dataPacketSent"
+        ::= { x25StatEntry 14 }
+
+x25StatOutgoingCircuits OBJECT-TYPE
+        SYNTAX  Gauge
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of active outgoing circuits.
+                This includes call requests sent but not yet
+                confirmed.  This does not count PVCs."
+        ::= { x25StatEntry 15 }
+
+x25StatIncomingCircuits OBJECT-TYPE
+        SYNTAX  Gauge
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of active Incoming Circuits.
+                This includes call indications received but
+                not yet acknowledged.  This does not count
+                PVCs."
+        ::= { x25StatEntry 16 }
+
+x25StatTwowayCircuits   OBJECT-TYPE
+        SYNTAX  Gauge
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+        "The number of active two-way Circuits.
+                This includes call requests sent but not yet
+                confirmed.  This does not count PVCs."
+        ::= { x25StatEntry 17 }
+
+x25StatRestartTimeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T20 restart timer
+                expired."
+        REFERENCE "10733 5.9 restartTimeouts"
+        ::= { x25StatEntry 18 }
+
+x25StatCallTimeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T21 call timer
+                expired."
+        REFERENCE "10733 5.9 callTimeouts"
+        ::= { x25StatEntry 19 }
+
+x25StatResetTimeouts    OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T22 reset timer
+                expired."
+        REFERENCE "10733 5.9 resetTimeouts"
+        ::= { x25StatEntry 20 }
+
+x25StatClearTimeouts    OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T23 clear timer
+                expired."
+        REFERENCE "10733 5.9 clearTimeouts"
+        ::= { x25StatEntry 21 }
+
+x25StatDataRxmtTimeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T25 data timer
+                expired."
+        REFERENCE "10733 5.9 dataRetransmissionsTimerExpiries"
+        ::= { x25StatEntry 22 }
+
+x25StatInterruptTimeouts        OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T26 interrupt timer
+                expired."
+        REFERENCE "10733 5.9 interruptTimerExpires"
+        ::= { x25StatEntry 23 }
+
+x25StatRetryCountExceededs OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times a retry counter was
+                exhausted."
+        REFERENCE "10733 5.9 retryCountsExceeded"
+        ::= { x25StatEntry 24 }
+
+x25StatClearCountExceededs OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the R23 clear count was
+                exceeded."
+        REFERENCE "10733 5.9 clearCountsExceeded"
+        ::= { x25StatEntry 25 }
+
+--      MIB-II also contains:
+
+-- ifInOctets: Number of data octets delivered to upper
+-- layer entities.
+
+-- ifInUcastPkts: Number of packets with a clear M-bit
+-- delivered to higher layer entities.
+
+-- ifDiscards: Number of packets dropped for lack of buffering
+
+-- ifInErrors: Number of packets received containing errors
+  -- REFERENCE ProtocolErrorsDetectedLocally
+
+-- ifInUnknownProtos: Number of packets with unknown circuit
+-- identifier.
+
+-- ifOutOctets: Number of data octets delivered by
+--      X.25 to upper layers.
+
+-- ifOutUcastPkts: Number of packets with a clear M-bit
+-- received from higher layer entities.
+
+-- ###########################################################
+--                    X.25 Channel Table
+-- ###########################################################
+
+x25ChannelTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF X25ChannelEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "These objects contain information about the
+                channel number configuration in an X.25 PLE.
+                These values are the configured values.
+                changes in these values after the interfaces
+                has started may not be reflected in the
+                operating PLE."
+        REFERENCE "See ISO 8208, Section 3.7"
+        ::= { x25 4 }
+
+x25ChannelEntry OBJECT-TYPE
+        SYNTAX  X25ChannelEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Entries of x25ChannelTable."
+        REFERENCE "This provides the information available
+                in 10733 logicalChannelAssignments."
+        INDEX { x25ChannelIndex }
+        ::= { x25ChannelTable 1    }
+
+X25ChannelEntry ::= SEQUENCE {
+        x25ChannelIndex
+                IfIndexType,
+        x25ChannelLIC
+                INTEGER,
+        x25ChannelHIC
+                INTEGER,
+        x25ChannelLTC
+                INTEGER,
+        x25ChannelHTC
+                INTEGER,
+        x25ChannelLOC
+                INTEGER,
+        x25ChannelHOC
+                INTEGER
+        }
+
+x25ChannelIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the X.25 Interface."
+        ::= { x25ChannelEntry 1 }
+
+x25ChannelLIC OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Lowest Incoming channel."
+        ::= { x25ChannelEntry 2 }
+
+x25ChannelHIC OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Highest Incoming channel.  A value of zero
+                indicates no channels in this range."
+        ::= { x25ChannelEntry 3 }
+
+x25ChannelLTC OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Lowest Two-way channel."
+        ::= { x25ChannelEntry 4 }
+
+x25ChannelHTC OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Highest Two-way channel.  A value of zero
+                indicates no channels in this range."
+        ::= { x25ChannelEntry 5 }
+
+x25ChannelLOC OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Lowest outgoing channel."
+        ::= { x25ChannelEntry 6 }
+
+x25ChannelHOC OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Highest outgoing channel.  A value of zero
+
+                indicates no channels in this range."
+        ::= { x25ChannelEntry 7 }
+
+-- ###########################################################
+--          X25 Per Circuits Information Table
+-- ###########################################################
+
+x25CircuitTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF X25CircuitEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "These objects contain general information
+                about a specific circuit of an X.25 PLE."
+        ::= { x25 5 }
+
+x25CircuitEntry OBJECT-TYPE
+        SYNTAX  X25CircuitEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Entries of x25CircuitTable."
+        INDEX { x25CircuitIndex,
+                x25CircuitChannel }
+        ::= { x25CircuitTable 1 }
+
+X25CircuitEntry ::= SEQUENCE {
+        x25CircuitIndex
+                IfIndexType,
+        x25CircuitChannel
+                INTEGER,
+        x25CircuitStatus
+                INTEGER,
+        x25CircuitEstablishTime
+                TimeTicks,
+        x25CircuitDirection
+                INTEGER,
+        x25CircuitInOctets
+                Counter,
+        x25CircuitInPdus
+                Counter,
+        x25CircuitInRemotelyInitiatedResets
+                Counter,
+        x25CircuitInProviderInitiatedResets
+                Counter,
+        x25CircuitInInterrupts
+                Counter,
+        x25CircuitOutOctets
+                Counter,
+        x25CircuitOutPdus
+                Counter,
+        x25CircuitOutInterrupts
+                Counter,
+        x25CircuitDataRetransmissionTimeouts
+                Counter,
+        x25CircuitResetTimeouts
+                Counter,
+        x25CircuitInterruptTimeouts
+                Counter,
+        x25CircuitCallParamId
+                OBJECT IDENTIFIER,
+        x25CircuitCalledDteAddress
+                X121Address,
+        x25CircuitCallingDteAddress
+                X121Address,
+        x25CircuitOriginallyCalledAddress
+                X121Address,
+        x25CircuitDescr
+                DisplayString
+        }
+
+x25CircuitIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The ifIndex value for the X.25 Interface."
+        ::= { x25CircuitEntry 1 }
+
+x25CircuitChannel OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The channel number for this circuit."
+        ::= { x25CircuitEntry 2 }
+
+x25CircuitStatus OBJECT-TYPE
+        SYNTAX  INTEGER {               -- state table states
+                        invalid (1),
+                        closed (2),             -- (p1)
+                        calling (3),            -- (p2,p3,p5)
+                        open (4),               -- (p4)
+
+                        clearing (5),           -- (p6,p7)
+                        pvc (6),
+                        pvcResetting (7),
+                        startClear (8),         -- Close cmd
+                        startPvcResetting (9),  -- Reset cmd
+                        other (10)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This object reports the current status of
+                the circuit.
+
+                An existing instance of this object can only
+                be set to startClear, startPvcResetting, or
+                invalid.  An instance with the value calling
+                or open can only be set to startClear and
+                that action will start clearing the circuit.
+                An instance with the value PVC can only be
+                set to startPvcResetting or invalid and that
+                action resets the PVC or deletes the circuit
+                respectively.  The values startClear or
+                startPvcResetting will never be returned by
+                an agent.  An attempt to set the status of
+                an existing instance to a value other than
+                one of these values will result in an error.
+
+                A non-existing instance can be set to PVC to
+                create a PVC if the implementation supports
+                dynamic creation of PVCs.  Some
+                implementations may only allow creation and
+                deletion of PVCs if the interface is down.
+                Since the instance identifier will supply
+                the PLE index and the channel number,
+                setting this object alone supplies
+                sufficient information to create the
+                instance.  All the DEFVAL clauses for the
+                other objects of this table are appropriate
+                for creating a PVC; PLEs creating entries
+                for placed or accepted calls will use values
+                appropriate for the call rather than the
+                value of the DEFVAL clause.  Two managers
+                trying to create the same PVC can determine
+                from the return code which manager succeeded
+                and which failed (the failing manager fails
+                because it can not set a value of PVC for an
+                existing object).
+
+                An entry in the closed or invalid state may
+                be deleted or reused at the agent's
+                convence.  If the entry is kept in the
+                closed state, the values of the parameters
+                associated with the entry must be correct.
+                Closed implies the values in the circuit
+                table are correct.
+
+                The value of invalid indicates the other
+                values in the table are invalid.  Many
+                agents may never return a value of invalid
+                because they dynamically allocate and free
+                unused table entries.  An agent for a
+                statically configured systems can return
+                invalid to indicate the entry has not yet
+                been used so the counters contain no
+                information."
+        REFERENCE "See ISO 8208,
+                        table 33 for (p<n>) state table"
+        ::= { x25CircuitEntry 3 }
+
+x25CircuitEstablishTime OBJECT-TYPE
+        SYNTAX  TimeTicks
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of sysUpTime when the channel was
+                associated with this circuit.  For outgoing
+                SVCs, this is the time the first call packet
+                was sent.  For incoming SVCs, this is the
+                time the call indication was received.  For
+                PVCs this is the time the PVC was able to
+                pass data to a higher layer entity without
+                loss of data."
+        ::= { x25CircuitEntry 4 }
+
+x25CircuitDirection OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        incoming (1),
+                        outgoing (2),
+                        pvc (3)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The direction of the call that established
+                this circuit."
+        REFERENCE "10733 direction"
+        DEFVAL { pvc }
+        ::= { x25CircuitEntry 5 }
+
+                -- X25 Circuit data flow statistics
+
+x25CircuitInOctets OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of octets of user data delivered
+                to upper layer."
+        REFERENCE "5.11 octetsReceivedCounter"
+        ::= { x25CircuitEntry 6 }
+
+x25CircuitInPdus OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of PDUs received for this
+                circuit."
+        REFERENCE "10733 5.11 dataPacketsReceived"
+        ::= { x25CircuitEntry 7 }
+
+x25CircuitInRemotelyInitiatedResets OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of Resets received for this
+                circuit with cause code of DTE initiated."
+        REFERENCE "10733 remotelyInitiatedResets"
+        ::= { x25CircuitEntry 8 }
+
+x25CircuitInProviderInitiatedResets OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of Resets received for this
+                circuit with cause code other than DTE
+                initiated."
+        REFERENCE "10733 ProviderInitiatedResets"
+        ::= { x25CircuitEntry 9 }
+
+x25CircuitInInterrupts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of interrupt packets received
+                for this circuit."
+        REFERENCE "10733 interruptPacketsReceived"
+        ::= { x25CircuitEntry 10 }
+
+x25CircuitOutOctets OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of octets of user data sent for
+                this circuit."
+        REFERENCE "10733 5.11 octetsSentCounter"
+        ::= { x25CircuitEntry 11 }
+
+x25CircuitOutPdus OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of PDUs sent for this circuit."
+        REFERENCE "10733 5.11 dataPacketsSent"
+        ::= { x25CircuitEntry 12 }
+
+x25CircuitOutInterrupts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of interrupt packets sent on
+                this circuit."
+        REFERENCE "10733 interruptPacketsSent"
+        ::= { x25CircuitEntry 13 }
+
+                -- X25 circuit timer statistics
+
+x25CircuitDataRetransmissionTimeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T25 data
+                retransmission timer expired for this
+                circuit."
+        REFERENCE "10733 5.11 dataRetransmissionTimerExpiries"
+        ::= { x25CircuitEntry 14 }
+
+x25CircuitResetTimeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T22 reset timer
+                expired for this circuit."
+        REFERENCE "10733 5.11 resetTimeouts"
+        ::= { x25CircuitEntry 15 }
+
+x25CircuitInterruptTimeouts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of times the T26 Interrupt timer
+                expired for this circuit."
+        REFERENCE "10733 interruptTimerExpiries"
+        ::= { x25CircuitEntry 16 }
+
+x25CircuitCallParamId OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "This identifies the instance of the
+                x25CallParmIndex for the entry in the
+                x25CallParmTable which contains the call
+                parameters in use with this circuit.  The
+                entry referenced must contain the values
+                that are currently in use by the circuit
+                rather than proposed values.  A value of
+                NULL indicates the circuit is a PVC or is
+                using all the default parameters."
+        DEFVAL { {0 0} }
+        ::= { x25CircuitEntry 17 }
+
+x25CircuitCalledDteAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "For incoming calls, this is the called
+                address from the call indication packet.
+                For outgoing calls, this is the called
+
+                address from the call confirmation packet.
+                This will be zero length for PVCs."
+        REFERENCE "10733 calledDTEAddress"
+        DEFVAL { ''h }
+        ::= { x25CircuitEntry 18 }
+
+x25CircuitCallingDteAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "For incoming calls, this is the calling
+                address from the call indication packet.
+                For outgoing calls, this is the calling
+                address from the call confirmation packet.
+                This will be zero length for PVCs."
+        REFERENCE "10733 callingDTEAddress"
+        DEFVAL { ''h }
+        ::= { x25CircuitEntry 19 }
+
+x25CircuitOriginallyCalledAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "For incoming calls, this is the address in
+                the call Redirection or Call Deflection
+                Notification facility if the call was
+                deflected or redirected, otherwise it will
+                be called address from the call indication
+                packet.  For outgoing calls, this is the
+                address from the call request packet.  This
+                will be zero length for PVCs."
+        REFERENCE "10733 originallyCalledAddress"
+        DEFVAL { ''h }
+        ::= { x25CircuitEntry 20 }
+
+x25CircuitDescr OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "A descriptive string associated with this
+                circuit.  This provides a place for the
+                agent to supply any descriptive information
+                it knows about the use or owner of the
+                circuit.  The agent may return the process
+                identifier and user name for the process
+
+                using the circuit.  Alternative the agent
+                may return the name of the configuration
+                entry that caused a bridge to establish the
+                circuit.  A zero length value indicates the
+                agent doesn't have any additional
+                information."
+        DEFVAL { ''h }
+        ::= { x25CircuitEntry 21 }
+
+-- ###########################################################
+--              The Cleared Circuit Table
+-- ###########################################################
+
+x25ClearedCircuitEntriesRequested OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The requested number of entries for the
+                agent to keep in the x25ClearedCircuit
+                table."
+        ::= { x25 6 }
+
+x25ClearedCircuitEntriesGranted OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The actual number of entries the agent will
+                keep in the x25ClearedCircuit Table."
+        ::= { x25 7 }
+
+x25ClearedCircuitTable  OBJECT-TYPE
+        SYNTAX SEQUENCE OF      X25ClearedCircuitEntry
+        ACCESS not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "A table of entries about closed circuits.
+                Entries must be made in this table whenever
+                circuits are closed and the close request or
+                close indication packet contains a clearing
+                cause other than DTE Originated or a
+                Diagnostic code field other than Higher
+                Layer Initiated disconnection-normal.  An
+                agent may optionally make entries for normal
+                closes (to record closing facilities or
+
+                other information).
+
+                Agents will delete the oldest entry in the
+                table when adding a new entry would exceed
+                agent resources.  Agents are required to
+                keep the last entry put in the table and may
+                keep more entries.  The object
+                x25OperClearEntriesGranted returns the
+                maximum number of entries kept in the
+                table."
+        REFERENCE "See ISO 8208 Section 12.2.3.1.1
+                        and 12.2.3.1.2"
+        ::= { x25 8 }
+
+x25ClearedCircuitEntry  OBJECT-TYPE
+        SYNTAX  X25ClearedCircuitEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Information about a cleared circuit."
+        INDEX { x25ClearedCircuitIndex }
+        ::= { x25ClearedCircuitTable 1 }
+
+X25ClearedCircuitEntry ::= SEQUENCE {
+        x25ClearedCircuitIndex
+                PositiveInteger,
+        x25ClearedCircuitPleIndex
+                IfIndexType,
+        x25ClearedCircuitTimeEstablished
+                TimeTicks,
+        x25ClearedCircuitTimeCleared
+                TimeTicks,
+        x25ClearedCircuitChannel
+                INTEGER,
+        x25ClearedCircuitClearingCause
+                INTEGER,
+        x25ClearedCircuitDiagnosticCode
+                INTEGER,
+        x25ClearedCircuitInPdus
+                Counter,
+        x25ClearedCircuitOutPdus
+                Counter,
+        x25ClearedCircuitCalledAddress
+                X121Address,
+        x25ClearedCircuitCallingAddress
+                X121Address,
+        x25ClearedCircuitClearFacilities
+                OCTET STRING
+
+        }
+
+x25ClearedCircuitIndex OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "An index that uniquely distinguishes one
+                entry in the clearedCircuitTable from
+                another.  This index will start at
+                2147483647 and will decrease by one for each
+                new entry added to the table.  Upon reaching
+                one, the index will reset to 2147483647.
+                Because the index starts at 2147483647 and
+                decreases, a manager may do a getnext on
+                entry zero and obtain the most recent entry.
+                When the index has the value of 1, the next
+                entry will delete all entries in the table
+                and that entry will be numbered 2147483647."
+        ::= { x25ClearedCircuitEntry 1 }
+
+x25ClearedCircuitPleIndex OBJECT-TYPE
+        SYNTAX  IfIndexType
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of ifIndex for the PLE which
+                cleared the circuit that created the entry."
+        ::= { x25ClearedCircuitEntry 2 }
+
+x25ClearedCircuitTimeEstablished OBJECT-TYPE
+        SYNTAX  TimeTicks
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of sysUpTime when the circuit was
+                established.  This will be the same value
+                that was in the x25CircuitEstablishTime for
+                the circuit."
+        ::= { x25ClearedCircuitEntry 3 }
+
+x25ClearedCircuitTimeCleared OBJECT-TYPE
+        SYNTAX  TimeTicks
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The value of sysUpTime when the circuit was
+                cleared.  For locally initiated clears, this
+
+                will be the time when the clear confirmation
+                was received.  For remotely initiated
+                clears, this will be the time when the clear
+                indication was received."
+        ::= { x25ClearedCircuitEntry 4 }
+
+x25ClearedCircuitChannel OBJECT-TYPE
+        SYNTAX  INTEGER (0..4095)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The channel number for the circuit that was
+                cleared."
+        ::= { x25ClearedCircuitEntry 5 }
+
+x25ClearedCircuitClearingCause OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The Clearing Cause from the clear request
+                or clear indication packet that cleared the
+                circuit."
+        REFERENCE "See ISO 8208 Section 12.2.3.1.1"
+        ::= { x25ClearedCircuitEntry 6 }
+
+x25ClearedCircuitDiagnosticCode OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The Diagnostic Code from the clear request
+                or clear indication packet that cleared the
+                circuit."
+        REFERENCE "See ISO 8208 Section 12.2.3.1.2"
+        ::= { x25ClearedCircuitEntry 7 }
+
+x25ClearedCircuitInPdus OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of PDUs received on the
+                circuit."
+        ::= { x25ClearedCircuitEntry 8 }
+
+x25ClearedCircuitOutPdus OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of PDUs transmitted on the
+                circuit."
+        ::= { x25ClearedCircuitEntry 9 }
+
+x25ClearedCircuitCalledAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The called address from the cleared
+                circuit."
+        ::= { x25ClearedCircuitEntry 10 }
+
+x25ClearedCircuitCallingAddress OBJECT-TYPE
+        SYNTAX  X121Address
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The calling address from the cleared
+                circuit."
+        ::= { x25ClearedCircuitEntry 11 }
+
+x25ClearedCircuitClearFacilities OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..109))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The facilities field from the clear request
+                or clear indication packet that cleared the
+                circuit.  A size of zero indicates no
+                facilities were present."
+        ::= { x25ClearedCircuitEntry 12 }
+
+-- ###########################################################
+--                The Call Parameter Table
+-- ###########################################################
+
+x25CallParmTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF X25CallParmEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "These objects contain the parameters that
+                can be varied between X.25 calls.  The
+                entries in this table are independent of the
+                PLE.  There exists only one of these tables
+                for the entire system.  The indexes for the
+                entries are independent of any PLE or any
+                circuit.  Other tables reference entries in
+                this table.  Entries in this table can be
+                used for default PLE parameters, for
+                parameters to use to place/answer a call,
+                for the parameters currently in use for a
+                circuit, or parameters that were used by a
+                circuit.
+
+                The number of references to a given set of
+                parameters can be found in the
+                x25CallParmRefCount object sharing the same
+                instance identifier with the parameters.
+                The value of this reference count also
+                affects the access of the objects in this
+                table.  An object in this table with the
+                same instance identifier as the instance
+                identifier of an x25CallParmRefCount must be
+                consider associated with that reference
+                count.  An object with an associated
+                reference count of zero can be written (if
+                its ACCESS clause allows it).  An object
+                with an associated reference count greater
+                than zero can not be written (regardless of
+                the ACCESS clause).  This ensures that a set
+                of call parameters being referenced from
+                another table can not be modified or changed
+                in a ways inappropriate for continued use by
+                that table."
+        ::= { x25 9 }
+
+x25CallParmEntry OBJECT-TYPE
+        SYNTAX  X25CallParmEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+                "Entries of x25CallParmTable."
+        INDEX { x25CallParmIndex }
+        ::= { x25CallParmTable 1 }
+
+X25CallParmEntry ::= SEQUENCE {
+        x25CallParmIndex
+                PositiveInteger,
+        x25CallParmStatus
+                EntryStatus,
+        x25CallParmRefCount
+                PositiveInteger,
+        x25CallParmInPacketSize
+                INTEGER,
+        x25CallParmOutPacketSize
+                INTEGER,
+        x25CallParmInWindowSize
+                INTEGER,
+        x25CallParmOutWindowSize
+                INTEGER,
+        x25CallParmAcceptReverseCharging
+                INTEGER,
+        x25CallParmProposeReverseCharging
+                INTEGER,
+        x25CallParmFastSelect
+                INTEGER,
+        x25CallParmInThruPutClasSize
+                INTEGER,
+        x25CallParmOutThruPutClasSize
+                INTEGER,
+        x25CallParmCug
+                DisplayString,
+        x25CallParmCugoa
+                DisplayString,
+        x25CallParmBcug
+                DisplayString,
+        x25CallParmNui
+                OCTET STRING,
+        x25CallParmChargingInfo
+                INTEGER,
+        x25CallParmRpoa
+                DisplayString,
+        x25CallParmTrnstDly
+                INTEGER,
+        x25CallParmCallingExt
+                DisplayString,
+        x25CallParmCalledExt
+                DisplayString,
+        x25CallParmInMinThuPutCls
+                INTEGER,
+        x25CallParmOutMinThuPutCls
+                INTEGER,
+        x25CallParmEndTrnsDly
+                OCTET STRING,
+        x25CallParmPriority
+                OCTET STRING,
+        x25CallParmProtection
+                DisplayString,
+        x25CallParmExptData
+                INTEGER,
+        x25CallParmUserData
+                OCTET STRING,
+        x25CallParmCallingNetworkFacilities
+                OCTET STRING,
+        x25CallParmCalledNetworkFacilities
+                OCTET STRING
+        }
+
+x25CallParmIndex OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "A value that distinguishes this entry from
+                another entry.  Entries in this table are
+                referenced from other objects which identify
+                call parameters.
+
+                It is impossible to know which other objects
+                in the MIB reference entries in the table by
+                looking at this table.  Because of this,
+                changes to parameters must be accomplished
+                by creating a new entry in this table and
+                then changing the referencing table to
+                identify the new entry.
+
+                Note that an agent will only use the values
+                in this table when another table is changed
+                to reference those values.  The number of
+                other tables that reference an index object
+                in this table can be found in
+                x25CallParmRefCount.  The value of the
+                reference count will affect the writability
+                of the objects as explained above.
+
+                Entries in this table which have a reference
+                count of zero maybe deleted at the convence
+                of the agent.  Care should be taken by the
+                agent to give the NMS sufficient time to
+                create a reference to newly created entries.
+
+                Should a Management Station not find a free
+                index with which to create a new entry, it
+                may feel free to delete entries with a
+
+                reference count of zero.  However in doing
+                so the Management Station much realize it
+                may impact other Management Stations."
+        ::= { x25CallParmEntry 1 }
+
+x25CallParmStatus OBJECT-TYPE
+        SYNTAX  EntryStatus
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The status of this call parameter entry.
+                See RFC 1271 for details of usage."
+        ::= { x25CallParmEntry 2 }
+
+x25CallParmRefCount OBJECT-TYPE
+        SYNTAX  PositiveInteger
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                "The number of references know by a
+                management station to exist to this set of
+                call parameters.  This is the number of
+                other objects that have returned a value of,
+                and will return a value of, the index for
+                this set of call parameters.  Examples of
+                such objects are the x25AdmnDefCallParamId,
+                x25OperDataLinkId, or x25AdmnDefCallParamId
+                objects defined above."
+        ::= { x25CallParmEntry 3 }
+
+x25CallParmInPacketSize OBJECT-TYPE
+        SYNTAX  INTEGER (0..4096)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The maximum receive packet size in octets
+                for a circuit.  A size of zero for a circuit
+                means use the PLE default size.  A size of
+                zero for the PLE means use a default size of
+                128."
+        REFERENCE "10733 proposedPacketSize;
+                See ISO 8208 Section 15.2.2.1.1"
+        DEFVAL { 128 }
+        ::= { x25CallParmEntry 4 }
+
+x25CallParmOutPacketSize OBJECT-TYPE
+        SYNTAX  INTEGER (0..4096)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The maximum transmit packet size in octets
+                for a circuit.  A size of zero for a circuit
+                means use the PLE default size.  A size of
+                zero for the PLE default means use a default
+                size of 128."
+        REFERENCE "10733 proposedPacketSize;
+                See ISO 8208 Section 15.2.2.1.1"
+        DEFVAL { 128 }
+        ::= { x25CallParmEntry 5 }
+
+x25CallParmInWindowSize OBJECT-TYPE
+        SYNTAX  INTEGER (0..127)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The receive window size for a circuit.  A
+                size of zero for a circuit means use the PLE
+                default size.  A size of zero for the PLE
+                default means use 2."
+        REFERENCE "10733 proposedWindowSize;
+                See ISO 8208 Section 15.2.2.1.2"
+        DEFVAL { 2 }
+        ::= { x25CallParmEntry 6 }
+
+x25CallParmOutWindowSize OBJECT-TYPE
+        SYNTAX  INTEGER (0..127)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The transmit window size for a circuit.  A
+                size of zero for a circuit means use the PLE
+                default size.  A size of zero for the PLE
+                default means use 2."
+        REFERENCE "10733 proposedWindowSize;
+                See ISO 8208 Section 15.2.2.1.2"
+        DEFVAL { 2 }
+        ::= { x25CallParmEntry 7 }
+
+x25CallParmAcceptReverseCharging OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        default (1),
+                        accept (2),
+                        refuse (3),
+                        neverAccept (4)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "An enumeration defining if the PLE will
+                accept or refuse charges.  A value of
+                default for a circuit means use the PLE
+                default value.  A value of neverAccept is
+                only used for the PLE default and indicates
+                the PLE will never accept reverse charging.
+                A value of default for a PLE default means
+                refuse."
+        REFERENCE "10733 acceptReverseCharging"
+        DEFVAL { refuse }
+        ::= { x25CallParmEntry 8 }
+
+x25CallParmProposeReverseCharging OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        default (1),
+                        reverse (2),
+                        local (3)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "An enumeration defining if the PLE should
+                propose reverse or local charging.  The
+                value of default for a circuit means use the
+                PLE default.  The value of default for the
+                PLE default means use local."
+        REFERENCE "10733 proposedPacketSize;
+                See ISO 8208 Section 15.2.2.6"
+        DEFVAL { local }
+        ::= { x25CallParmEntry 9 }
+
+x25CallParmFastSelect OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        default (1),
+                        notSpecified (2),
+                        fastSelect (3),
+                        restrictedFastResponse (4),
+                        noFastSelect (5),
+                        noRestrictedFastResponse (6)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "Expresses preference for use of fast select
+                facility.  The value of default for a
+                circuit is the PLE default.  A value of
+
+                default for the PLE means noFastSelect.  A
+                value of noFastSelect or
+                noRestrictedFastResponse indicates a circuit
+                may not use fast select or restricted fast
+                response."
+        REFERENCE "10733 fastSelect;
+        Sec ISO 8208 Section 15.2.2.6"
+        DEFVAL { noFastSelect }
+        ::= { x25CallParmEntry 10 }
+
+x25CallParmInThruPutClasSize    OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        tcReserved1 (1),
+                        tcReserved2 (2),
+                        tc75 (3),
+                        tc150 (4),
+                        tc300 (5),
+                        tc600 (6),
+                        tc1200  (7),
+                        tc2400  (8),
+                        tc4800  (9),
+                        tc9600  (10),
+                        tc19200 (11),
+                        tc48000 (12),
+                        tc64000 (13),
+                        tcReserved14 (14),
+                        tcReserved15 (15),
+                        tcReserved0 (16),
+                        tcNone  (17),
+                        tcDefault (18)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The incoming throughput class to negotiate.
+                A value of tcDefault for a circuit means use
+                the PLE default.  A value of tcDefault for
+                the PLE default means tcNone.  A value of
+                tcNone means do not negotiate throughtput
+                class."
+        REFERENCE "See ISO 8208 Section 15.2.2.2, table 18"
+        DEFVAL { tcNone }
+        ::= { x25CallParmEntry 11 }
+
+x25CallParmOutThruPutClasSize   OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        tcReserved1 (1),
+                        tcReserved2 (2),
+                        tc75 (3),
+                        tc150 (4),
+                        tc300 (5),
+                tc600 (6),
+                        tc1200  (7),
+                        tc2400  (8),
+                        tc4800  (9),
+                        tc9600  (10),
+                        tc19200 (11),
+                        tc48000 (12),
+                        tc64000 (13),
+                        tcReserved14 (14),
+                        tcReserved15 (15),
+                        tcReserved0 (16),
+                        tcNone  (17),
+                        tcDefault (18)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The outgoing throughput class to negotiate.
+                A value of tcDefault for a circuit means use
+                the PLE default.  A value of tcDefault for
+                the PLE default means use tcNone.  A value
+                of tcNone means do not negotiate throughtput
+                class."
+        REFERENCE "See ISO 8208 Section 15.2.2.2, table 18"
+        DEFVAL { tcNone }
+        ::= { x25CallParmEntry 12 }
+
+x25CallParmCug  OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..4))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Closed User Group to specify.  This
+                consists of two or four octets containing
+                the characters 0 through 9.  A zero length
+                string indicates no facility requested.  A
+                string length of three containing the
+                characters DEF for a circuit means use the
+                PLE default, (the PLE default parameter may
+                not reference an entry of DEF.)"
+        REFERENCE "See ISO 8208 Section 15.2.2.3"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 13 }
+
+x25CallParmCugoa        OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..4))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Closed User Group with Outgoing Access
+                to specify.  This consists of two or four
+                octets containing the characters 0 through
+                9.  A string length of three containing the
+                characters DEF for a circuit means use the
+                PLE default (the PLE default parameters may
+                not reference an entry of DEF).  A zero
+                length string indicates no facility
+                requested."
+        REFERENCE "See ISO 8208 Section 15.2.2.4"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 14 }
+
+x25CallParmBcug OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..3))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Bilateral Closed User Group to specify.
+                This consists of two octets containing the
+                characters 0 through 9.  A string length of
+                three containing the characters DEF for a
+                circuit means use the PLE default (the PLE
+                default parameter may not reference an entry
+                of DEF).  A zero length string indicates no
+                facility requested."
+        REFERENCE "See ISO 8208 Section 15.2.2.5"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 15 }
+
+x25CallParmNui  OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..108))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Network User Identifier facility.  This
+                is binary value to be included immediately
+                after the length field.  The PLE will supply
+                the length octet.  A zero length string
+                indicates no facility requested.  This value
+                is ignored for the PLE default parameters
+                entry."
+        REFERENCE "See ISO 8208 Section 15.2.2.7"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 16 }
+
+x25CallParmChargingInfo OBJECT-TYPE
+        SYNTAX INTEGER {
+                        default (1),
+                        noFacility (2),
+                        noChargingInfo (3),
+                        chargingInfo (4)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The charging Information facility.  A value
+                of default for a circuit means use the PLE
+                default.  The value of default for the
+                default PLE parameters means use noFacility.
+                The value of noFacility means do not include
+                a facility."
+        REFERENCE "See ISO 8208 Section 15.2.2.8"
+        DEFVAL { noFacility }
+        ::= { x25CallParmEntry 17 }
+
+x25CallParmRpoa OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..108))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The RPOA facility.  The octet string
+                contains n * 4 sequences of the characters
+                0-9 to specify a facility with n entries.
+                The octet string containing the 3 characters
+                DEF for a circuit specifies use of the PLE
+                default (the entry for the PLE default may
+                not contain DEF).  A zero length string
+                indicates no facility requested."
+        REFERENCE "See ISO 8208, section 15.2.2.9"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 18 }
+
+x25CallParmTrnstDly     OBJECT-TYPE
+        SYNTAX  INTEGER (0..65537)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Transit Delay Selection and Indication
+                value.  A value of 65536 indicates no
+                facility requested.  A value of 65537 for a
+                circuit means use the PLE default (the PLE
+
+                default parameters entry may not use the
+                value 65537).  The value 65535 may only be
+                used to indicate the value in use by a
+                circuit."
+        REFERENCE "See ISO 8208, Section 15.2.2.13"
+        DEFVAL { 65536 }
+        ::= { x25CallParmEntry 19 }
+
+        -- The following parameters are for CCITT facilities.
+
+x25CallParmCallingExt OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..40))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Calling Extension facility.  This
+                contains one of the following:
+
+                A sequence of hex digits with the value to
+                be put in the facility. These digits will be
+                converted to binary by the agent and put in
+                the facility.  These octets do not include
+                the length octet.
+
+                A value containing the three character DEF
+                for a circuit means use the PLE default,
+                (the entry for the PLE default parameters
+                may not use the value DEF).
+
+                A zero length string indicates no facility
+                requested."
+        REFERENCE "See ISO 8208 Section 15.3.2.1"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 20 }
+
+x25CallParmCalledExt OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..40))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Called Extension facility.  This
+                contains one of the following:
+
+                A sequence of hex digits with the value to
+                be put in the facility.  These digits will be
+                converted to binary by the agent and put in
+                the facility.  These octets do not include
+
+                the length octet.
+
+                A value containing the three character DEF
+                for a circuit means use the PLE default,
+                (the entry for the PLE default parameters
+                may not use the value DEF).
+
+                A zero length string indicates no facility
+                requested."
+        REFERENCE "See ISO 8208 Section 15.3.2.2"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 21 }
+
+x25CallParmInMinThuPutCls       OBJECT-TYPE
+        SYNTAX  INTEGER (0..17)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The minimum input throughput Class.  A
+                value of 16 for a circuit means use the PLE
+                default (the PLE parameters entry may not
+                use this value).  A value of 17 indicates no
+                facility requested."
+        REFERENCE "See ISO 8208 Section 15.3.2.3"
+        DEFVAL { 17 }
+        ::= { x25CallParmEntry 22 }
+
+x25CallParmOutMinThuPutCls OBJECT-TYPE
+        SYNTAX  INTEGER (0..17)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The minimum output throughput Class.  A
+                value of 16 for a circuit means use the PLE
+                default (the PLE parameters entry may not
+                use this value).  A value of 17 indicates no
+                facility requested."
+        REFERENCE "See ISO 8208 Section 15.3.2.3"
+        DEFVAL { 17 }
+        ::= { x25CallParmEntry 23 }
+
+x25CallParmEndTrnsDly OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..6))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The End-to-End Transit Delay to negotiate.
+                An octet string of length 2, 4, or 6
+
+                contains the facility encoded as specified
+                in ISO/IEC 8208 section 15.3.2.4.  An octet
+                string of length 3 containing the three
+                character DEF for a circuit means use the
+                PLE default (the entry for the PLE default
+                can not contain the characters DEF).  A zero
+                length string indicates no facility
+                requested."
+        REFERENCE "See ISO 8208 Section 15.3.2.4"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 24 }
+
+x25CallParmPriority OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..6))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The priority facility to negotiate.  The
+                octet string encoded as specified in ISO/IEC
+                8208 section 15.3.2.5.  A zero length string
+                indicates no facility requested.  The entry
+                for the PLE default parameters must be zero
+                length."
+        REFERENCE "See ISO 8208 Section 15.3.2.5"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 25 }
+
+x25CallParmProtection OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..108))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "A string contains the following:
+                A hex string containing the value for the
+                protection facility.  This will be converted
+                from hex to the octets actually in the
+                packet by the agent.  The agent will supply
+                the length field and the length octet is not
+                contained in this string.
+
+                An string containing the 3 characters DEF
+                for a circuit means use the PLE default (the
+                entry for the PLE default parameters may not
+                use the value DEF).
+
+                A zero length string mean no facility
+                requested."
+        REFERENCE "See ISO 8208 Section 15.3.2.5"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 26 }
+
+x25CallParmExptData OBJECT-TYPE
+        SYNTAX  INTEGER {
+                        default (1),
+                        noExpeditedData (2),
+                        expeditedData (3)
+                }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The Expedited Data facility to negotiate.
+                A value of default for a circuit means use
+                the PLE default value.  The entry for the
+                PLE default parameters may not have the
+                value default."
+        REFERENCE "See ISO 8208 Section 15.3.2.7"
+        DEFVAL { noExpeditedData }
+        ::= { x25CallParmEntry 27 }
+
+x25CallParmUserData     OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..128))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The call user data as placed in the packet.
+                A zero length string indicates no call user
+                data.  If both the circuit call parameters
+                and the PLE default have call user data
+                defined, the data from the circuit call
+                parameters will be used.  If only the PLE
+                has data defined, the PLE entry will be
+                used.  If neither the circuit call
+                parameters or the PLE default entry has a
+                value, no call user data will be sent."
+        REFERENCE "See ISO 8208 Section 12.2.1.1.6, 12.2.1.2"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 28 }
+
+x25CallParmCallingNetworkFacilities     OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..108))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The calling network facilities.  The
+                facilities are encoded here exactly as
+                encoded in the call packet.  These
+
+                facilities do not include the marker
+                facility code.
+
+                A zero length string in the entry for the
+                parameter to use when establishing a circuit
+                means use the PLE default.  A zero length
+                string in the entry for PLE default
+                parameters indicates no default facilities."
+        REFERENCE "See ISO 8206 Section 15.1, category b"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 29 }
+
+x25CallParmCalledNetworkFacilities      OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..108))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                "The called network facilities.  The
+                facilities are encoded here exactly as
+                encoded in the call packet.  These
+                facilities do not include the marker
+                facility code.
+
+                A zero length string in the entry for the
+                parameter to use when establishing a circuit
+                means use the PLE default.  A zero length
+                string in the entry for PLE default
+                parameters indicates no default facilities."
+        REFERENCE "See ISO 8206 Section 15.1, category c"
+        DEFVAL { ''h }
+        ::= { x25CallParmEntry 30 }
+
+-- ###########################################################
+--              X.25 Traps
+-- ###########################################################
+
+x25Restart      TRAP-TYPE
+        ENTERPRISE  x25
+        VARIABLES { x25OperIndex }
+        DESCRIPTION
+                "This trap means the X.25 PLE sent or
+                received a restart packet.  The restart that
+                brings up the link should not send a
+                x25Restart trap so the interface should send
+                a linkUp trap.  Sending this trap means the
+                agent does not send a linkDown and linkUp
+                trap."
+        ::= 1
+
+x25Reset        TRAP-TYPE
+        ENTERPRISE  x25
+        VARIABLES { x25CircuitIndex,
+                x25CircuitChannel }
+        DESCRIPTION
+                "If the PLE sends or receives a reset, the
+                agent should send an x25Reset trap."
+        ::= 2
+
+-- ###########################################################
+--              X.25 Protocol Version Identifiers
+-- ###########################################################
+
+x25ProtocolVersion OBJECT IDENTIFIER
+        ::= { x25 10 }
+
+        -- X.25 CCITT 1976 version.
+x25protocolCcittV1976 OBJECT IDENTIFIER
+        ::= { x25ProtocolVersion 1 }
+
+        -- X.25 CCITT 1980 version.
+x25protocolCcittV1980 OBJECT IDENTIFIER
+        ::= { x25ProtocolVersion 2 }
+
+        -- X.25 CCITT 1984 version.
+x25protocolCcittV1984 OBJECT IDENTIFIER
+        ::= { x25ProtocolVersion 3 }
+
+        -- X.25 CCITT 1988 version.
+x25protocolCcittV1988 OBJECT IDENTIFIER
+        ::= { x25ProtocolVersion 4 }
+
+        -- X.25 1987 version of ISO 8208.
+x25protocolIso8208V1987 OBJECT IDENTIFIER
+        ::= { x25ProtocolVersion 5 }
+
+        -- X.25 1989 version of ISO 8208.
+x25protocolIso8208V1989 OBJECT IDENTIFIER
+        ::= { x25ProtocolVersion 6 }
+
+-- ###########################################################
+
+END
diff --git a/snmp_builder/mibs/RFC1414-MIB.mib b/snmp_builder/mibs/RFC1414-MIB.mib
new file mode 100644
index 0000000..64c5c49
--- /dev/null
+++ b/snmp_builder/mibs/RFC1414-MIB.mib
@@ -0,0 +1,132 @@
+RFC1414-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE
+        FROM RFC-1212
+    mib-2,
+    tcpConnLocalAddress, tcpConnLocalPort,
+    tcpConnRemAddress, tcpConnRemPort
+            FROM RFC1213-MIB;
+
+ident   OBJECT IDENTIFIER ::= { mib-2 24 }
+
+-- conformance groups
+
+identInfo       OBJECT IDENTIFIER ::= { ident 1 }
+
+-- textual conventions
+
+-- none
+
+-- the ident information system group
+--
+-- implementation of this group is mandatory
+
+identTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF IdentEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table containing user information for TCP
+            connections.
+
+            Note that this table contains entries for all TCP
+            connections on a managed system.  The
+            corresponding instance of tcpConnState (defined in
+            MIB-II) indicates the state of a particular
+
+            connection."
+        ::= { identInfo 1 }
+
+identEntry OBJECT-TYPE
+        SYNTAX  IdentEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "User information about a particular TCP
+            connection."
+        INDEX   { tcpConnLocalAddress, tcpConnLocalPort,
+                  tcpConnRemAddress, tcpConnRemPort }
+        ::= { identTable 1 }
+
+IdentEntry ::=
+    SEQUENCE {
+        identStatus     INTEGER,
+        identOpSys      OCTET STRING,
+        identCharset    OCTET STRING,
+        identUserid     OCTET STRING,
+        identMisc       OCTET STRING
+    }
+
+identStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    noError(1),
+                    unknownError(2)
+                }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates whether user information for the
+            associated TCP connection can be determined.  A
+            value of `noError(1)' indicates that user
+            information is available.  A value of
+            `unknownError(2)' indicates that user information
+            is not available."
+        ::= { identEntry 1 }
+
+identOpSys OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..40))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates the type of operating system in use.
+            In addition to identifying an operating system,
+            each assignment made for this purpose also
+            (implicitly) identifies the textual format and
+
+            maximum size of the corresponding identUserid and
+            identMisc objects.
+
+            The legal values for the `indentOpSys' strings
+            are those listed in the SYSTEM NAMES section of
+            the most recent edition of the ASSIGNED NUMBERS
+            RFC [8]."
+        ::= { identEntry 2 }
+
+identCharset OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..40))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates the repertoire of the corresponding
+            identUserid and identMisc objects.
+
+            The legal values for the `identCharset' strings
+            are those listed in the CHARACTER SET section of
+            the most recent edition of the ASSIGNED NUMBERS
+            RFC [8]."
+        ::= { identEntry 3 }
+
+identUserid OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates the user's identity.  Interpretation of
+            this object requires examination of the
+            corresponding value of the identOpSys and
+            identCharset objects."
+        ::= { identEntry 4 }
+
+identMisc OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates miscellaneous information about the
+            user.  Interpretation of this object requires
+            examination of the corresponding value of the
+            identOpSys and identCharset objects."
+        ::= { identEntry 5 }
+
+END
diff --git a/snmp_builder/mibs/RIPv2-MIB.mib b/snmp_builder/mibs/RIPv2-MIB.mib
new file mode 100644
index 0000000..d9aa09e
--- /dev/null
+++ b/snmp_builder/mibs/RIPv2-MIB.mib
@@ -0,0 +1,532 @@
+   RIPv2-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+       TimeTicks, IpAddress                     FROM SNMPv2-SMI
+       TEXTUAL-CONVENTION, RowStatus            FROM SNMPv2-TC
+       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+       mib-2                                    FROM RFC1213-MIB;
+
+   --  This MIB module uses the extended OBJECT-TYPE macro as
+   --  defined in [9].
+
+   rip2  MODULE-IDENTITY
+           LAST-UPDATED "9407272253Z"      -- Wed Jul 27 22:53:04 PDT 1994
+           ORGANIZATION "IETF RIP-II Working Group"
+           CONTACT-INFO
+          "       Fred Baker
+          Postal: Cisco Systems
+                  519 Lado Drive
+                  Santa Barbara, California 93111
+          Tel:    +1 805 681 0115
+          E-Mail: fbaker@cisco.com
+
+          Postal: Gary Malkin
+                  Xylogics, Inc.
+                  53 Third Avenue
+                  Burlington, MA  01803
+
+          Phone:  (617) 272-8140
+          EMail:  gmalkin@Xylogics.COM"
+      DESCRIPTION
+         "The MIB module to describe the RIP2 Version 2 Protocol"
+     ::= { mib-2 23 }
+
+ --  RIP-2 Management Information Base
+
+ -- the RouteTag type represents the contents of the
+ -- Route Domain field in the packet header or route entry.
+ -- The use of the Route Domain is deprecated.
+
+ RouteTag ::= TEXTUAL-CONVENTION
+     STATUS      current
+     DESCRIPTION
+        "the RouteTag type represents the contents of the Route Domain
+        field in the packet header or route entry"
+    SYNTAX      OCTET STRING (SIZE (2))
+
+--4.1 Global Counters
+
+--      The RIP-2 Globals Group.
+--      Implementation of this group is mandatory for systems
+--      which implement RIP-2.
+
+-- These counters are intended to facilitate debugging quickly
+-- changing routes or failing neighbors
+
+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
+
+    rip2GlobalRouteChanges OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of route changes made to the IP Route
+           Database by RIP.  This does not include the refresh
+           of a route's age."
+       ::= { rip2Globals 1 }
+
+    rip2GlobalQueries OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of responses sent to RIP queries
+           from other systems."
+       ::= { rip2Globals 2 }
+
+--4.2 RIP Interface Tables
+
+--  RIP Interfaces Groups
+--  Implementation of these Groups is mandatory for systems
+--  which implement RIP-2.
+
+-- The RIP Interface Status Table.
+
+    rip2IfStatTable OBJECT-TYPE
+        SYNTAX   SEQUENCE OF Rip2IfStatEntry
+        MAX-ACCESS   not-accessible
+        STATUS   current
+        DESCRIPTION
+           "A list of subnets which require separate
+           status monitoring in RIP."
+       ::= { rip2 2 }
+
+   rip2IfStatEntry OBJECT-TYPE
+       SYNTAX   Rip2IfStatEntry
+       MAX-ACCESS   not-accessible
+       STATUS   current
+       DESCRIPTION
+          "A Single Routing Domain in a single Subnet."
+      INDEX { rip2IfStatAddress }
+      ::= { rip2IfStatTable 1 }
+
+    Rip2IfStatEntry ::=
+        SEQUENCE {
+            rip2IfStatAddress
+                IpAddress,
+            rip2IfStatRcvBadPackets
+                Counter32,
+            rip2IfStatRcvBadRoutes
+                Counter32,
+            rip2IfStatSentUpdates
+                Counter32,
+            rip2IfStatStatus
+                RowStatus
+    }
+
+    rip2IfStatAddress OBJECT-TYPE
+        SYNTAX   IpAddress
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The IP Address of this system on the indicated
+           subnet. For unnumbered interfaces, the value 0.0.0.N,
+           where the least significant 24 bits (N) is the ifIndex
+           for the IP Interface in network byte order."
+       ::= { rip2IfStatEntry 1 }
+
+    rip2IfStatRcvBadPackets OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of RIP response packets received by
+           the RIP process which were subsequently discarded
+           for any reason (e.g. a version 0 packet, or an
+           unknown command type)."
+       ::= { rip2IfStatEntry 2 }
+
+    rip2IfStatRcvBadRoutes OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of routes, in valid RIP packets,
+           which were ignored for any reason (e.g. unknown
+           address family, or invalid metric)."
+       ::= { rip2IfStatEntry 3 }
+
+    rip2IfStatSentUpdates OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of triggered RIP updates actually
+           sent on this interface.  This explicitly does
+           NOT include full updates sent containing new
+           information."
+       ::= { rip2IfStatEntry 4 }
+
+    rip2IfStatStatus OBJECT-TYPE
+        SYNTAX   RowStatus
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "Writing invalid has the effect of deleting
+           this interface."
+       ::= { rip2IfStatEntry 5 }
+
+-- The RIP Interface Configuration Table.
+
+    rip2IfConfTable OBJECT-TYPE
+        SYNTAX   SEQUENCE OF Rip2IfConfEntry
+        MAX-ACCESS   not-accessible
+        STATUS   current
+        DESCRIPTION
+           "A list of subnets which require separate
+           configuration in RIP."
+       ::= { rip2 3 }
+
+   rip2IfConfEntry OBJECT-TYPE
+       SYNTAX   Rip2IfConfEntry
+       MAX-ACCESS   not-accessible
+       STATUS   current
+       DESCRIPTION
+          "A Single Routing Domain in a single Subnet."
+      INDEX { rip2IfConfAddress }
+      ::= { rip2IfConfTable 1 }
+
+    Rip2IfConfEntry ::=
+        SEQUENCE {
+
+            rip2IfConfAddress
+                IpAddress,
+            rip2IfConfDomain
+                RouteTag,
+            rip2IfConfAuthType
+                INTEGER,
+            rip2IfConfAuthKey
+                OCTET STRING (SIZE(0..16)),
+            rip2IfConfSend
+                INTEGER,
+            rip2IfConfReceive
+                INTEGER,
+            rip2IfConfDefaultMetric
+                INTEGER,
+            rip2IfConfStatus
+                RowStatus,
+            rip2IfConfSrcAddress
+                IpAddress
+    }
+
+    rip2IfConfAddress OBJECT-TYPE
+        SYNTAX   IpAddress
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The IP Address of this system on the indicated
+           subnet.  For unnumbered interfaces, the value 0.0.0.N,
+           where the least significant 24 bits (N) is the ifIndex
+           for the IP Interface in network byte order."
+       ::= { rip2IfConfEntry 1 }
+
+    rip2IfConfDomain OBJECT-TYPE
+        SYNTAX   RouteTag
+        MAX-ACCESS   read-create
+        STATUS   obsolete
+        DESCRIPTION
+           "Value inserted into the Routing Domain field
+           of all RIP packets sent on this interface."
+       DEFVAL { '0000'h }
+       ::= { rip2IfConfEntry 2 }
+
+    rip2IfConfAuthType OBJECT-TYPE
+        SYNTAX   INTEGER {
+                    noAuthentication (1),
+                    simplePassword (2),
+                    md5 (3)
+                 }
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "The type of Authentication used on this
+           interface."
+       DEFVAL { noAuthentication }
+       ::= { rip2IfConfEntry 3 }
+
+    rip2IfConfAuthKey OBJECT-TYPE
+        SYNTAX   OCTET STRING (SIZE(0..16))
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "The value to be used as the Authentication Key
+           whenever the corresponding instance of
+           rip2IfConfAuthType has a value other than
+           noAuthentication.  A modification of the corresponding
+           instance of rip2IfConfAuthType does not modify
+           the rip2IfConfAuthKey value.  If a string shorter
+           than 16 octets is supplied, it will be left-
+           justified and padded to 16 octets, on the right,
+           with nulls (0x00).
+
+           Reading this object always results in an  OCTET
+           STRING of length zero; authentication may not
+           be bypassed by reading the MIB object."
+       DEFVAL { ''h }
+       ::= { rip2IfConfEntry 4 }
+
+    rip2IfConfSend OBJECT-TYPE
+        SYNTAX   INTEGER {
+                    doNotSend (1),
+                    ripVersion1 (2),
+                    rip1Compatible (3),
+                    ripVersion2 (4),
+                    ripV1Demand (5),
+                    ripV2Demand (6)
+                 }
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "What the router sends on this interface.
+           ripVersion1 implies sending RIP updates compliant
+           with  RFC  1058.   rip1Compatible implies
+           broadcasting RIP-2 updates using RFC 1058 route
+           subsumption rules.  ripVersion2 implies
+           multicasting RIP-2 updates.  ripV1Demand indicates
+           the use of Demand RIP on a WAN interface under RIP
+           Version 1 rules.  ripV2Demand indicates the use of
+
+           Demand RIP on a WAN interface under Version 2 rules."
+       DEFVAL { rip1Compatible }
+       ::= { rip2IfConfEntry 5 }
+
+    rip2IfConfReceive OBJECT-TYPE
+        SYNTAX   INTEGER {
+                    rip1 (1),
+                    rip2 (2),
+                    rip1OrRip2 (3),
+                    doNotRecieve (4)
+                 }
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "This indicates which version of RIP updates
+           are to be accepted.  Note that rip2 and
+           rip1OrRip2 implies reception of multicast
+           packets."
+       DEFVAL { rip1OrRip2 }
+       ::= { rip2IfConfEntry 6 }
+
+    rip2IfConfDefaultMetric OBJECT-TYPE
+        SYNTAX   INTEGER ( 0..15 )
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "This variable indicates the metric that is to
+           be used for the default route entry in RIP updates
+           originated on this interface.  A value of zero
+           indicates that no default route should be
+           originated; in this case, a default route via
+           another router may be propagated."
+       ::= { rip2IfConfEntry 7 }
+
+    rip2IfConfStatus OBJECT-TYPE
+        SYNTAX   RowStatus
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "Writing invalid has  the  effect  of  deleting
+           this interface."
+       ::= { rip2IfConfEntry 8 }
+
+    rip2IfConfSrcAddress OBJECT-TYPE
+        SYNTAX   IpAddress
+        MAX-ACCESS   read-create
+        STATUS   current
+        DESCRIPTION
+           "The IP Address this system will use as a source
+            address on this interface.  If it is a numbered
+            interface, this MUST be the same value as
+            rip2IfConfAddress.  On unnumbered interfaces,
+            it must be the value of rip2IfConfAddress for
+            some interface on the system."
+       ::= { rip2IfConfEntry 9 }
+
+--4.3 Peer Table
+
+--  Peer Table
+
+--      The RIP Peer Group
+--      Implementation of this Group is Optional
+
+--      This group provides information about active peer
+--      relationships intended to assist in debugging.  An
+--      active peer is a router from which a valid RIP
+--      updated has been heard in the last 180 seconds.
+
+    rip2PeerTable OBJECT-TYPE
+        SYNTAX   SEQUENCE OF Rip2PeerEntry
+        MAX-ACCESS   not-accessible
+        STATUS   current
+        DESCRIPTION
+           "A list of RIP Peers."
+       ::= { rip2 4 }
+
+   rip2PeerEntry OBJECT-TYPE
+       SYNTAX   Rip2PeerEntry
+       MAX-ACCESS   not-accessible
+       STATUS   current
+       DESCRIPTION
+          "Information regarding a single routing peer."
+      INDEX { rip2PeerAddress, rip2PeerDomain }
+      ::= { rip2PeerTable 1 }
+
+    Rip2PeerEntry ::=
+        SEQUENCE {
+            rip2PeerAddress
+                IpAddress,
+            rip2PeerDomain
+                RouteTag,
+            rip2PeerLastUpdate
+                TimeTicks,
+            rip2PeerVersion
+                INTEGER,
+            rip2PeerRcvBadPackets
+
+                Counter32,
+            rip2PeerRcvBadRoutes
+                Counter32
+            }
+
+    rip2PeerAddress OBJECT-TYPE
+        SYNTAX   IpAddress
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The IP Address that the peer is using as its source
+            address.  Note that on an unnumbered link, this may
+            not be a member of any subnet on the system."
+       ::= { rip2PeerEntry 1 }
+
+    rip2PeerDomain OBJECT-TYPE
+        SYNTAX   RouteTag
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The value in the Routing Domain field  in  RIP
+           packets received from the peer.  As domain suuport
+           is deprecated, this must be zero."
+       ::= { rip2PeerEntry 2 }
+
+    rip2PeerLastUpdate OBJECT-TYPE
+        SYNTAX   TimeTicks
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The value of sysUpTime when the most recent
+           RIP update was received from this system."
+       ::= { rip2PeerEntry 3 }
+
+    rip2PeerVersion OBJECT-TYPE
+        SYNTAX   INTEGER ( 0..255 )
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The RIP version number in the header of the
+           last RIP packet received."
+       ::= { rip2PeerEntry 4 }
+
+    rip2PeerRcvBadPackets OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of RIP response packets from this
+           peer discarded as invalid."
+       ::= { rip2PeerEntry 5 }
+
+    rip2PeerRcvBadRoutes OBJECT-TYPE
+        SYNTAX   Counter32
+        MAX-ACCESS   read-only
+        STATUS   current
+        DESCRIPTION
+           "The number of routes from this peer that were
+           ignored because the entry format was invalid."
+       ::= { rip2PeerEntry 6 }
+
+-- conformance information
+
+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
+
+rip2Groups      OBJECT IDENTIFIER ::= { rip2Conformance 1 }
+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
+
+-- compliance statements
+rip2Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+       "The compliance statement "
+    MODULE  -- this module
+    MANDATORY-GROUPS {
+                 rip2GlobalGroup,
+                 rip2IfStatGroup,
+                 rip2IfConfGroup,
+                 rip2PeerGroup
+        }
+    GROUP       rip2GlobalGroup
+    DESCRIPTION
+       "This group defines global controls for RIP-II systems."
+    GROUP       rip2IfStatGroup
+    DESCRIPTION
+       "This group defines interface statistics for RIP-II systems."
+    GROUP       rip2IfConfGroup
+    DESCRIPTION
+       "This group defines interface configuration for RIP-II systems."
+    GROUP       rip2PeerGroup
+    DESCRIPTION
+       "This group defines peer information for RIP-II systems."
+    ::= { rip2Compliances 1 }
+
+-- units of conformance
+
+rip2GlobalGroup    OBJECT-GROUP
+    OBJECTS {
+                rip2GlobalRouteChanges,
+                rip2GlobalQueries
+    }
+    STATUS  current
+    DESCRIPTION
+       "This group defines global controls for RIP-II systems."
+    ::= { rip2Groups 1 }
+rip2IfStatGroup    OBJECT-GROUP
+    OBJECTS {
+            rip2IfStatAddress,
+            rip2IfStatRcvBadPackets,
+            rip2IfStatRcvBadRoutes,
+            rip2IfStatSentUpdates,
+            rip2IfStatStatus
+    }
+    STATUS  current
+    DESCRIPTION
+       "This group defines interface statistics for RIP-II systems."
+    ::= { rip2Groups 2 }
+rip2IfConfGroup    OBJECT-GROUP
+    OBJECTS {
+            rip2IfConfAddress,
+            rip2IfConfAuthType,
+            rip2IfConfAuthKey,
+            rip2IfConfSend,
+            rip2IfConfReceive,
+            rip2IfConfDefaultMetric,
+            rip2IfConfStatus,
+            rip2IfConfSrcAddress
+    }
+    STATUS  current
+    DESCRIPTION
+       "This group defines interface configuration for RIP-II systems."
+    ::= { rip2Groups 3 }
+rip2PeerGroup    OBJECT-GROUP
+    OBJECTS {
+            rip2PeerAddress,
+            rip2PeerDomain,
+            rip2PeerLastUpdate,
+            rip2PeerVersion,
+            rip2PeerRcvBadPackets,
+            rip2PeerRcvBadRoutes
+    }
+    STATUS  current
+    DESCRIPTION
+       "This group defines peer information for RIP-II systems."
+    ::= { rip2Groups 4 }
+END
diff --git a/snmp_builder/mibs/RMON-MIB.mib b/snmp_builder/mibs/RMON-MIB.mib
new file mode 100644
index 0000000..983c22e
--- /dev/null
+++ b/snmp_builder/mibs/RMON-MIB.mib
@@ -0,0 +1,3980 @@
+RMON-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+        NOTIFICATION-TYPE, mib-2, Counter32,
+        Integer32, TimeTicks                   FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION, DisplayString      FROM SNMPv2-TC
+
+        MODULE-COMPLIANCE, OBJECT-GROUP,
+        NOTIFICATION-GROUP                     FROM SNMPv2-CONF;
+
+--  Remote Network Monitoring MIB
+
+rmonMibModule MODULE-IDENTITY
+    LAST-UPDATED "200005110000Z"  -- 11 May, 2000
+    ORGANIZATION "IETF RMON MIB Working Group"
+    CONTACT-INFO
+        "Steve Waldbusser
+        Phone: +1-650-948-6500
+        Fax:   +1-650-745-0671
+        Email: waldbusser@nextbeacon.com"
+    DESCRIPTION
+        "Remote network monitoring devices, often called
+        monitors or probes, are instruments that exist for
+        the purpose of managing a network. This MIB defines
+        objects for managing remote network monitoring devices."
+
+    REVISION "200005110000Z"    -- 11 May, 2000
+    DESCRIPTION
+        "Reformatted into SMIv2 format.
+
+        This version published as RFC 2819."
+
+    REVISION "199502010000Z" -- 1 Feb, 1995
+    DESCRIPTION
+        "Bug fixes, clarifications and minor changes based on
+        implementation experience, published as RFC1757 [18].
+
+        Two changes were made to object definitions:
+
+        1) A new status bit has been defined for the
+        captureBufferPacketStatus object, indicating that the
+        packet order within the capture buffer may not be identical to
+        the packet order as received off the wire.  This bit may only
+
+        be used for packets transmitted by the probe.  Older NMS
+        applications can safely ignore this status bit, which might be
+        used by newer agents.
+
+        2) The packetMatch trap has been removed.  This trap was never
+        actually 'approved' and was not added to this document along
+        with the risingAlarm and fallingAlarm traps. The packetMatch
+        trap could not be throttled, which could cause disruption of
+        normal network traffic under some circumstances. An NMS should
+        configure a risingAlarm threshold on the appropriate
+        channelMatches instance if a trap is desired for a packetMatch
+        event. Note that logging of packetMatch events is still
+        supported--only trap generation for such events has been
+        removed.
+
+        In addition, several clarifications to individual object
+        definitions have been added to assist agent and NMS
+        implementors:
+
+        - global definition of 'good packets' and 'bad packets'
+
+        - more detailed text governing conceptual row creation and
+          modification
+
+        - instructions for probes relating to interface changes and
+          disruptions
+
+        - clarification of some ethernet counter definitions
+
+        - recommended formula for calculating network utilization
+
+        - clarification of channel and captureBuffer behavior for some
+          unusual conditions
+
+        - examples of proper instance naming for each table"
+
+    REVISION "199111010000Z"    -- 1 Nov, 1991
+    DESCRIPTION
+        "The original version of this MIB, published as RFC1271."
+    ::= { rmonConformance 8 }
+
+    rmon    OBJECT IDENTIFIER ::= { mib-2 16 }
+
+    -- textual conventions
+
+OwnerString ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This data type is used to model an administratively
+        assigned name of the owner of a resource. Implementations
+        must accept values composed of well-formed NVT ASCII
+        sequences. In addition, implementations should accept
+        values composed of well-formed UTF-8 sequences.
+
+        It is suggested that this name contain one or more of
+        the following: IP address, management station name,
+        network manager's name, location, or phone number.
+        In some cases the agent itself will be the owner of
+        an entry.  In these cases, this string shall be set
+        to a string starting with 'monitor'.
+
+        SNMP access control is articulated entirely in terms
+        of the contents of MIB views; access to a particular
+        SNMP object instance depends only upon its presence
+        or absence in a particular MIB view and never upon
+        its value or the value of related object instances.
+        Thus, objects of this type afford resolution of
+        resource contention only among cooperating
+        managers; they realize no access control function
+        with respect to uncooperative parties."
+    SYNTAX OCTET STRING (SIZE (0..127))
+
+EntryStatus ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "The status of a table entry.
+
+        Setting this object to the value invalid(4) has the
+        effect of invalidating the corresponding entry.
+        That is, it effectively disassociates the mapping
+        identified with said entry.
+        It is an implementation-specific matter as to whether
+        the agent removes an invalidated entry from the table.
+        Accordingly, management stations must be prepared to
+        receive tabular information from agents that corresponds
+        to entries currently not in use.  Proper
+        interpretation of such entries requires examination
+        of the relevant EntryStatus object.
+
+        An existing instance of this object cannot be set to
+        createRequest(2).  This object may only be set to
+        createRequest(2) when this instance is created.  When
+        this object is created, the agent may wish to create
+        supplemental object instances with default values
+        to complete a conceptual row in this table.  Because the
+
+        creation of these default objects is entirely at the option
+        of the agent, the manager must not assume that any will be
+        created, but may make use of any that are created.
+        Immediately after completing the create operation, the agent
+        must set this object to underCreation(3).
+
+        When in the underCreation(3) state, an entry is allowed to
+        exist in a possibly incomplete, possibly inconsistent state,
+        usually to allow it to be modified in multiple PDUs.  When in
+        this state, an entry is not fully active.
+        Entries shall exist in the underCreation(3) state until
+        the management station is finished configuring the entry
+        and sets this object to valid(1) or aborts, setting this
+        object to invalid(4).  If the agent determines that an
+        entry has been in the underCreation(3) state for an
+        abnormally long time, it may decide that the management
+        station has crashed.  If the agent makes this decision,
+        it may set this object to invalid(4) to reclaim the
+        entry.  A prudent agent will understand that the
+        management station may need to wait for human input
+        and will allow for that possibility in its
+        determination of this abnormally long period.
+
+        An entry in the valid(1) state is fully configured and
+        consistent and fully represents the configuration or
+        operation such a row is intended to represent.  For
+        example, it could be a statistical function that is
+        configured and active, or a filter that is available
+        in the list of filters processed by the packet capture
+        process.
+
+        A manager is restricted to changing the state of an entry in
+        the following ways:
+
+             To:       valid  createRequest  underCreation  invalid
+        From:
+        valid             OK             NO             OK       OK
+        createRequest    N/A            N/A            N/A      N/A
+        underCreation     OK             NO             OK       OK
+        invalid           NO             NO             NO       OK
+        nonExistent       NO             OK             NO       OK
+
+        In the table above, it is not applicable to move the state
+        from the createRequest state to any other state because the
+        manager will never find the variable in that state.  The
+        nonExistent state is not a value of the enumeration, rather
+        it means that the entryStatus variable does not exist at all.
+
+        An agent may allow an entryStatus variable to change state in
+        additional ways, so long as the semantics of the states are
+        followed.  This allowance is made to ease the implementation of
+        the agent and is made despite the fact that managers should
+        never exercise these additional state transitions."
+    SYNTAX INTEGER {
+               valid(1),
+               createRequest(2),
+               underCreation(3),
+               invalid(4)
+           }
+
+    statistics        OBJECT IDENTIFIER ::= { rmon 1 }
+    history           OBJECT IDENTIFIER ::= { rmon 2 }
+    alarm             OBJECT IDENTIFIER ::= { rmon 3 }
+    hosts             OBJECT IDENTIFIER ::= { rmon 4 }
+    hostTopN          OBJECT IDENTIFIER ::= { rmon 5 }
+    matrix            OBJECT IDENTIFIER ::= { rmon 6 }
+    filter            OBJECT IDENTIFIER ::= { rmon 7 }
+    capture           OBJECT IDENTIFIER ::= { rmon 8 }
+    event             OBJECT IDENTIFIER ::= { rmon 9 }
+    rmonConformance   OBJECT IDENTIFIER ::= { rmon 20 }
+
+-- The Ethernet Statistics Group
+--
+-- Implementation of the Ethernet Statistics group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The ethernet statistics group contains statistics measured by the
+-- probe for each monitored interface on this device.  These
+-- statistics take the form of free running counters that start from
+-- zero when a valid entry is created.
+--
+-- This group currently has statistics defined only for
+-- Ethernet interfaces.  Each etherStatsEntry contains statistics
+-- for one Ethernet interface.  The probe must create one
+-- etherStats entry for each monitored Ethernet interface
+-- on the device.
+
+etherStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF EtherStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of Ethernet statistics entries."
+    ::= { statistics 1 }
+
+etherStatsEntry OBJECT-TYPE
+    SYNTAX     EtherStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A collection of statistics kept for a particular
+        Ethernet interface.  As an example, an instance of the
+        etherStatsPkts object might be named etherStatsPkts.1"
+    INDEX { etherStatsIndex }
+    ::= { etherStatsTable 1 }
+
+EtherStatsEntry ::= SEQUENCE {
+    etherStatsIndex                    Integer32,
+    etherStatsDataSource               OBJECT IDENTIFIER,
+    etherStatsDropEvents               Counter32,
+    etherStatsOctets                   Counter32,
+    etherStatsPkts                     Counter32,
+    etherStatsBroadcastPkts            Counter32,
+    etherStatsMulticastPkts            Counter32,
+    etherStatsCRCAlignErrors           Counter32,
+    etherStatsUndersizePkts            Counter32,
+    etherStatsOversizePkts             Counter32,
+    etherStatsFragments                Counter32,
+    etherStatsJabbers                  Counter32,
+    etherStatsCollisions               Counter32,
+    etherStatsPkts64Octets             Counter32,
+    etherStatsPkts65to127Octets        Counter32,
+    etherStatsPkts128to255Octets       Counter32,
+    etherStatsPkts256to511Octets       Counter32,
+    etherStatsPkts512to1023Octets      Counter32,
+    etherStatsPkts1024to1518Octets     Counter32,
+    etherStatsOwner                    OwnerString,
+    etherStatsStatus                   EntryStatus
+}
+
+etherStatsIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of this object uniquely identifies this
+        etherStats entry."
+    ::= { etherStatsEntry 1 }
+
+etherStatsDataSource OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the source of the data that
+        this etherStats entry is configured to analyze.  This
+        source can be any ethernet interface on this device.
+        In order to identify a particular interface, this object
+        shall identify the instance of the ifIndex object,
+        defined in RFC 2233 [17], for the desired interface.
+        For example, if an entry were to receive data from
+        interface #1, this object would be set to ifIndex.1.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the identified
+        interface.
+
+        An agent may or may not be able to tell if fundamental
+        changes to the media of the interface have occurred and
+        necessitate an invalidation of this entry.  For example, a
+        hot-pluggable ethernet card could be pulled out and replaced
+        by a token-ring card.  In such a case, if the agent has such
+        knowledge of the change, it is recommended that it
+        invalidate this entry.
+
+        This object may not be modified if the associated
+        etherStatsStatus object is equal to valid(1)."
+    ::= { etherStatsEntry 2 }
+
+etherStatsDropEvents OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of events in which packets
+        were dropped by the probe due to lack of resources.
+        Note that this number is not necessarily the number of
+        packets dropped; it is just the number of times this
+        condition has been detected."
+    ::= { etherStatsEntry 3 }
+
+etherStatsOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets of data (including
+        those in bad packets) received on the
+        network (excluding framing bits but including
+        FCS octets).
+
+        This object can be used as a reasonable estimate of
+        10-Megabit ethernet utilization.  If greater precision is
+        desired, the etherStatsPkts and etherStatsOctets objects
+        should be sampled before and after a common interval.  The
+        differences in the sampled values are Pkts and Octets,
+        respectively, and the number of seconds in the interval is
+        Interval.  These values are used to calculate the Utilization
+        as follows:
+
+                         Pkts * (9.6 + 6.4) + (Octets * .8)
+         Utilization = -------------------------------------
+                                 Interval * 10,000
+
+        The result of this equation is the value Utilization which
+        is the percent utilization of the ethernet segment on a
+        scale of 0 to 100 percent."
+    ::= { etherStatsEntry 4 }
+
+etherStatsPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad packets,
+        broadcast packets, and multicast packets) received."
+    ::= { etherStatsEntry 5 }
+
+etherStatsBroadcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of good packets received that were
+        directed to the broadcast address.  Note that this
+        does not include multicast packets."
+    ::= { etherStatsEntry 6 }
+
+etherStatsMulticastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of good packets received that were
+        directed to a multicast address.  Note that this number
+        does not include packets directed to the broadcast
+
+        address."
+    ::= { etherStatsEntry 7 }
+
+etherStatsCRCAlignErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets received that
+        had a length (excluding framing bits, but
+        including FCS octets) of between 64 and 1518
+        octets, inclusive, but had either a bad
+        Frame Check Sequence (FCS) with an integral
+        number of octets (FCS Error) or a bad FCS with
+        a non-integral number of octets (Alignment Error)."
+    ::= { etherStatsEntry 8 }
+
+etherStatsUndersizePkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets received that were
+        less than 64 octets long (excluding framing bits,
+        but including FCS octets) and were otherwise well
+        formed."
+    ::= { etherStatsEntry 9 }
+
+etherStatsOversizePkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets received that were
+        longer than 1518 octets (excluding framing bits,
+        but including FCS octets) and were otherwise
+        well formed."
+    ::= { etherStatsEntry 10 }
+
+etherStatsFragments OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets received that were less than
+        64 octets in length (excluding framing bits but including
+        FCS octets) and had either a bad Frame Check Sequence
+        (FCS) with an integral number of octets (FCS Error) or a
+        bad FCS with a non-integral number of octets (Alignment
+        Error).
+
+        Note that it is entirely normal for etherStatsFragments to
+        increment.  This is because it counts both runts (which are
+        normal occurrences due to collisions) and noise hits."
+    ::= { etherStatsEntry 11 }
+
+etherStatsJabbers OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets received that were
+        longer than 1518 octets (excluding framing bits,
+        but including FCS octets), and had either a bad
+        Frame Check Sequence (FCS) with an integral number
+        of octets (FCS Error) or a bad FCS with a non-integral
+        number of octets (Alignment Error).
+
+        Note that this definition of jabber is different
+        than the definition in IEEE-802.3 section 8.2.1.5
+        (10BASE5) and section 10.3.1.4 (10BASE2).  These
+        documents define jabber as the condition where any
+        packet exceeds 20 ms.  The allowed range to detect
+        jabber is between 20 ms and 150 ms."
+    ::= { etherStatsEntry 12 }
+
+etherStatsCollisions OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Collisions"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The best estimate of the total number of collisions
+        on this Ethernet segment.
+
+        The value returned will depend on the location of the
+        RMON probe. Section 8.2.1.3 (10BASE-5) and section
+        10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
+        station must detect a collision, in the receive mode, if
+        three or more stations are transmitting simultaneously.  A
+        repeater port must detect a collision when two or more
+
+        stations are transmitting simultaneously.  Thus a probe
+        placed on a repeater port could record more collisions
+        than a probe connected to a station on the same segment
+        would.
+
+        Probe location plays a much smaller role when considering
+        10BASE-T.  14.2.1.4 (10BASE-T) of IEEE standard 802.3
+        defines a collision as the simultaneous presence of signals
+        on the DO and RD circuits (transmitting and receiving
+        at the same time).  A 10BASE-T station can only detect
+        collisions when it is transmitting.  Thus probes placed on
+        a station and a repeater, should report the same number of
+        collisions.
+
+        Note also that an RMON probe inside a repeater should
+        ideally report collisions between the repeater and one or
+        more other hosts (transmit collisions as defined by IEEE
+        802.3k) plus receiver collisions observed on any coax
+        segments to which the repeater is connected."
+    ::= { etherStatsEntry 13 }
+
+etherStatsPkts64Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were 64 octets in length
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsEntry 14 }
+
+etherStatsPkts65to127Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        65 and 127 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsEntry 15 }
+
+etherStatsPkts128to255Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        128 and 255 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsEntry 16 }
+
+etherStatsPkts256to511Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        256 and 511 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsEntry 17 }
+
+etherStatsPkts512to1023Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        512 and 1023 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsEntry 18 }
+
+etherStatsPkts1024to1518Octets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets (including bad
+        packets) received that were between
+        1024 and 1518 octets in length inclusive
+        (excluding framing bits but including FCS octets)."
+    ::= { etherStatsEntry 19 }
+
+etherStatsOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { etherStatsEntry 20 }
+
+etherStatsStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this etherStats entry."
+    ::= { etherStatsEntry 21 }
+
+-- The History Control Group
+
+-- Implementation of the History Control group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The history control group controls the periodic statistical
+-- sampling of data from various types of networks.  The
+-- historyControlTable stores configuration entries that each
+-- define an interface, polling period, and other parameters.
+-- Once samples are taken, their data is stored in an entry
+-- in a media-specific table.  Each such entry defines one
+-- sample, and is associated with the historyControlEntry that
+-- caused the sample to be taken.  Each counter in the
+-- etherHistoryEntry counts the same event as its similarly-named
+-- counterpart in the etherStatsEntry, except that each value here
+-- is a cumulative sum during a sampling period.
+--
+-- If the probe keeps track of the time of day, it should start
+-- the first sample of the history at a time such that
+-- when the next hour of the day begins, a sample is
+-- started at that instant.  This tends to make more
+-- user-friendly reports, and enables comparison of reports
+-- from different probes that have relatively accurate time
+-- of day.
+--
+-- The probe is encouraged to add two history control entries
+-- per monitored interface upon initialization that describe a short
+-- term and a long term polling period.  Suggested parameters are 30
+-- seconds for the short term polling period and 30 minutes for
+-- the long term period.
+
+historyControlTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HistoryControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of history control entries."
+    ::= { history 1 }
+
+historyControlEntry OBJECT-TYPE
+    SYNTAX     HistoryControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of parameters that set up a periodic sampling of
+        statistics.  As an example, an instance of the
+        historyControlInterval object might be named
+        historyControlInterval.2"
+    INDEX { historyControlIndex }
+    ::= { historyControlTable 1 }
+
+HistoryControlEntry ::= SEQUENCE {
+    historyControlIndex             Integer32,
+    historyControlDataSource        OBJECT IDENTIFIER,
+    historyControlBucketsRequested  Integer32,
+    historyControlBucketsGranted    Integer32,
+    historyControlInterval          Integer32,
+    historyControlOwner             OwnerString,
+    historyControlStatus            EntryStatus
+}
+
+historyControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        historyControl table.  Each such entry defines a
+        set of samples at a particular interval for an
+        interface on the device."
+    ::= { historyControlEntry 1 }
+
+historyControlDataSource OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the source of the data for
+        which historical data was collected and
+        placed in a media-specific table on behalf of this
+        historyControlEntry.  This source can be any
+        interface on this device.  In order to identify
+
+        a particular interface, this object shall identify
+        the instance of the ifIndex object, defined
+        in  RFC 2233 [17], for the desired interface.
+        For example, if an entry were to receive data from
+        interface #1, this object would be set to ifIndex.1.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the identified
+        interface.
+
+        An agent may or may not be able to tell if fundamental
+        changes to the media of the interface have occurred and
+        necessitate an invalidation of this entry.  For example, a
+        hot-pluggable ethernet card could be pulled out and replaced
+        by a token-ring card.  In such a case, if the agent has such
+        knowledge of the change, it is recommended that it
+        invalidate this entry.
+
+        This object may not be modified if the associated
+        historyControlStatus object is equal to valid(1)."
+    ::= { historyControlEntry 2 }
+
+historyControlBucketsRequested OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The requested number of discrete time intervals
+        over which data is to be saved in the part of the
+        media-specific table associated with this
+        historyControlEntry.
+
+        When this object is created or modified, the probe
+        should set historyControlBucketsGranted as closely to
+        this object as is possible for the particular probe
+        implementation and available resources."
+    DEFVAL { 50 }
+    ::= { historyControlEntry 3 }
+
+historyControlBucketsGranted OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of discrete sampling intervals
+        over which data shall be saved in the part of
+        the media-specific table associated with this
+        historyControlEntry.
+
+        When the associated historyControlBucketsRequested
+        object is created or modified, the probe
+        should set this object as closely to the requested
+        value as is possible for the particular
+        probe implementation and available resources.  The
+        probe must not lower this value except as a result
+        of a modification to the associated
+        historyControlBucketsRequested object.
+
+        There will be times when the actual number of
+        buckets associated with this entry is less than
+        the value of this object.  In this case, at the
+        end of each sampling interval, a new bucket will
+        be added to the media-specific table.
+
+        When the number of buckets reaches the value of
+        this object and a new bucket is to be added to the
+        media-specific table, the oldest bucket associated
+        with this historyControlEntry shall be deleted by
+        the agent so that the new bucket can be added.
+
+        When the value of this object changes to a value less
+        than the current value, entries are deleted
+        from the media-specific table associated with this
+        historyControlEntry.  Enough of the oldest of these
+        entries shall be deleted by the agent so that their
+        number remains less than or equal to the new value of
+        this object.
+
+        When the value of this object changes to a value greater
+        than the current value, the number of associated media-
+        specific entries may be allowed to grow."
+    ::= { historyControlEntry 4 }
+
+historyControlInterval OBJECT-TYPE
+    SYNTAX     Integer32 (1..3600)
+    UNITS      "Seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The interval in seconds over which the data is
+        sampled for each bucket in the part of the
+        media-specific table associated with this
+        historyControlEntry.  This interval can
+        be set to any number of seconds between 1 and
+        3600 (1 hour).
+
+        Because the counters in a bucket may overflow at their
+
+        maximum value with no indication, a prudent manager will
+        take into account the possibility of overflow in any of
+        the associated counters.  It is important to consider the
+        minimum time in which any counter could overflow on a
+        particular media type and set the historyControlInterval
+        object to a value less than this interval.  This is
+        typically most important for the 'octets' counter in any
+        media-specific table.  For example, on an Ethernet
+        network, the etherHistoryOctets counter could overflow
+        in about one hour at the Ethernet's maximum
+        utilization.
+
+        This object may not be modified if the associated
+        historyControlStatus object is equal to valid(1)."
+    DEFVAL { 1800 }
+    ::= { historyControlEntry 5 }
+
+historyControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { historyControlEntry 6 }
+
+historyControlStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this historyControl entry.
+
+        Each instance of the media-specific table associated
+        with this historyControlEntry will be deleted by the agent
+        if this historyControlEntry is not equal to valid(1)."
+    ::= { historyControlEntry 7 }
+
+-- The Ethernet History Group
+
+-- Implementation of the Ethernet History group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Ethernet History group records periodic statistical samples
+-- from a network and stores them for later retrieval.
+-- Once samples are taken, their data is stored in an entry
+-- in a media-specific table.  Each such entry defines one
+
+-- sample, and is associated with the historyControlEntry that
+-- caused the sample to be taken.  This group defines the
+-- etherHistoryTable, for Ethernet networks.
+--
+
+etherHistoryTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF EtherHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of Ethernet history entries."
+    ::= { history 2 }
+
+etherHistoryEntry OBJECT-TYPE
+    SYNTAX     EtherHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An historical sample of Ethernet statistics on a particular
+        Ethernet interface.  This sample is associated with the
+        historyControlEntry which set up the parameters for
+        a regular collection of these samples.  As an example, an
+        instance of the etherHistoryPkts object might be named
+        etherHistoryPkts.2.89"
+    INDEX { etherHistoryIndex , etherHistorySampleIndex }
+    ::= { etherHistoryTable 1 }
+
+EtherHistoryEntry ::= SEQUENCE {
+    etherHistoryIndex                 Integer32,
+    etherHistorySampleIndex           Integer32,
+    etherHistoryIntervalStart         TimeTicks,
+    etherHistoryDropEvents            Counter32,
+    etherHistoryOctets                Counter32,
+    etherHistoryPkts                  Counter32,
+    etherHistoryBroadcastPkts         Counter32,
+    etherHistoryMulticastPkts         Counter32,
+    etherHistoryCRCAlignErrors        Counter32,
+    etherHistoryUndersizePkts         Counter32,
+    etherHistoryOversizePkts          Counter32,
+    etherHistoryFragments             Counter32,
+    etherHistoryJabbers               Counter32,
+    etherHistoryCollisions            Counter32,
+    etherHistoryUtilization           Integer32
+}
+
+etherHistoryIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The history of which this entry is a part.  The
+        history identified by a particular value of this
+        index is the same history as identified
+        by the same value of historyControlIndex."
+    ::= { etherHistoryEntry 1 }
+
+etherHistorySampleIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies the particular
+        sample this entry represents among all samples
+        associated with the same historyControlEntry.
+        This index starts at 1 and increases by one
+        as each new sample is taken."
+    ::= { etherHistoryEntry 2 }
+
+etherHistoryIntervalStart OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime at the start of the interval
+        over which this sample was measured.  If the probe
+        keeps track of the time of day, it should start
+        the first sample of the history at a time such that
+        when the next hour of the day begins, a sample is
+        started at that instant.  Note that following this
+        rule may require the probe to delay collecting the
+        first sample of the history, as each sample must be
+        of the same interval.  Also note that the sample which
+        is currently being collected is not accessible in this
+        table until the end of its interval."
+    ::= { etherHistoryEntry 3 }
+
+etherHistoryDropEvents OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of events in which packets
+        were dropped by the probe due to lack of resources
+        during this sampling interval.  Note that this number
+        is not necessarily the number of packets dropped, it
+        is just the number of times this condition has been
+
+        detected."
+    ::= { etherHistoryEntry 4 }
+
+etherHistoryOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of octets of data (including
+        those in bad packets) received on the
+        network (excluding framing bits but including
+        FCS octets)."
+    ::= { etherHistoryEntry 5 }
+
+etherHistoryPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets (including bad packets)
+        received during this sampling interval."
+    ::= { etherHistoryEntry 6 }
+
+etherHistoryBroadcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets received during this
+        sampling interval that were directed to the
+        broadcast address."
+    ::= { etherHistoryEntry 7 }
+
+etherHistoryMulticastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets received during this
+        sampling interval that were directed to a
+        multicast address.  Note that this number does not
+        include packets addressed to the broadcast address."
+    ::= { etherHistoryEntry 8 }
+
+etherHistoryCRCAlignErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets received during this
+        sampling interval that had a length (excluding
+        framing bits but including FCS octets) between
+        64 and 1518 octets, inclusive, but had either a bad Frame
+        Check Sequence (FCS) with an integral number of octets
+        (FCS Error) or a bad FCS with a non-integral number
+        of octets (Alignment Error)."
+    ::= { etherHistoryEntry 9 }
+
+etherHistoryUndersizePkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets received during this
+        sampling interval that were less than 64 octets
+        long (excluding framing bits but including FCS
+        octets) and were otherwise well formed."
+    ::= { etherHistoryEntry 10 }
+
+etherHistoryOversizePkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets received during this
+        sampling interval that were longer than 1518
+        octets (excluding framing bits but including
+        FCS octets) but were otherwise well formed."
+    ::= { etherHistoryEntry 11 }
+
+etherHistoryFragments OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total number of packets received during this
+        sampling interval that were less than 64 octets in
+        length (excluding framing bits but including FCS
+
+        octets) had either a bad Frame Check Sequence (FCS)
+        with an integral number of octets (FCS Error) or a bad
+        FCS with a non-integral number of octets (Alignment
+        Error).
+
+        Note that it is entirely normal for etherHistoryFragments to
+        increment.  This is because it counts both runts (which are
+        normal occurrences due to collisions) and noise hits."
+    ::= { etherHistoryEntry 12 }
+
+etherHistoryJabbers OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets received during this
+        sampling interval that were longer than 1518 octets
+        (excluding framing bits but including FCS octets),
+        and  had either a bad Frame Check Sequence (FCS)
+        with an integral number of octets (FCS Error) or
+        a bad FCS with a non-integral number of octets
+        (Alignment Error).
+
+        Note that this definition of jabber is different
+        than the definition in IEEE-802.3 section 8.2.1.5
+        (10BASE5) and section 10.3.1.4 (10BASE2).  These
+        documents define jabber as the condition where any
+        packet exceeds 20 ms.  The allowed range to detect
+        jabber is between 20 ms and 150 ms."
+    ::= { etherHistoryEntry 13 }
+
+etherHistoryCollisions OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Collisions"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The best estimate of the total number of collisions
+        on this Ethernet segment during this sampling
+        interval.
+
+        The value returned will depend on the location of the
+        RMON probe. Section 8.2.1.3 (10BASE-5) and section
+        10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
+        station must detect a collision, in the receive mode, if
+        three or more stations are transmitting simultaneously.  A
+        repeater port must detect a collision when two or more
+
+        stations are transmitting simultaneously.  Thus a probe
+        placed on a repeater port could record more collisions
+        than a probe connected to a station on the same segment
+        would.
+
+        Probe location plays a much smaller role when considering
+        10BASE-T.  14.2.1.4 (10BASE-T) of IEEE standard 802.3
+        defines a collision as the simultaneous presence of signals
+        on the DO and RD circuits (transmitting and receiving
+        at the same time).  A 10BASE-T station can only detect
+        collisions when it is transmitting.  Thus probes placed on
+        a station and a repeater, should report the same number of
+        collisions.
+
+        Note also that an RMON probe inside a repeater should
+        ideally report collisions between the repeater and one or
+        more other hosts (transmit collisions as defined by IEEE
+        802.3k) plus receiver collisions observed on any coax
+        segments to which the repeater is connected."
+    ::= { etherHistoryEntry 14 }
+
+etherHistoryUtilization OBJECT-TYPE
+    SYNTAX     Integer32 (0..10000)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The best estimate of the mean physical layer
+        network utilization on this interface during this
+        sampling interval, in hundredths of a percent."
+    ::= { etherHistoryEntry 15 }
+
+-- The Alarm Group
+
+-- Implementation of the Alarm group is optional. The Alarm Group
+-- requires the implementation of the Event group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Alarm group periodically takes statistical samples from
+-- variables in the probe and compares them to thresholds that have
+-- been configured.  The alarm table stores configuration
+-- entries that each define a variable, polling period, and
+-- threshold parameters.  If a sample is found to cross the
+-- threshold values, an event is generated.  Only variables that
+-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
+-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
+-- this way.
+--
+
+-- This function has a hysteresis mechanism to limit the generation
+-- of events.  This mechanism generates one event as a threshold
+-- is crossed in the appropriate direction.  No more events are
+-- generated for that threshold until the opposite threshold is
+-- crossed.
+--
+-- In the case of a sampling a deltaValue, a probe may implement
+-- this mechanism with more precision if it takes a delta sample
+-- twice per period, each time comparing the sum of the latest two
+-- samples to the threshold.  This allows the detection of threshold
+-- crossings that span the sampling boundary.  Note that this does
+-- not require any special configuration of the threshold value.
+-- It is suggested that probes implement this more precise algorithm.
+
+alarmTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF AlarmEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of alarm entries."
+    ::= { alarm 1 }
+
+alarmEntry OBJECT-TYPE
+    SYNTAX     AlarmEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of parameters that set up a periodic checking
+        for alarm conditions.  For example, an instance of the
+        alarmValue object might be named alarmValue.8"
+    INDEX { alarmIndex }
+    ::= { alarmTable 1 }
+
+AlarmEntry ::= SEQUENCE {
+    alarmIndex                    Integer32,
+    alarmInterval                 Integer32,
+    alarmVariable                 OBJECT IDENTIFIER,
+    alarmSampleType               INTEGER,
+    alarmValue                    Integer32,
+    alarmStartupAlarm             INTEGER,
+    alarmRisingThreshold          Integer32,
+    alarmFallingThreshold         Integer32,
+    alarmRisingEventIndex         Integer32,
+    alarmFallingEventIndex        Integer32,
+    alarmOwner                    OwnerString,
+    alarmStatus                   EntryStatus
+}
+
+alarmIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        alarm table.  Each such entry defines a
+        diagnostic sample at a particular interval
+        for an object on the device."
+    ::= { alarmEntry 1 }
+
+alarmInterval OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The interval in seconds over which the data is
+        sampled and compared with the rising and falling
+        thresholds.  When setting this variable, care
+        should be taken in the case of deltaValue
+        sampling - the interval should be set short enough
+        that the sampled variable is very unlikely to
+        increase or decrease by more than 2^31 - 1 during
+        a single sampling interval.
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 2 }
+
+alarmVariable OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The object identifier of the particular variable to be
+        sampled.  Only variables that resolve to an ASN.1 primitive
+        type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
+        Gauge, or TimeTicks) may be sampled.
+
+        Because SNMP access control is articulated entirely
+        in terms of the contents of MIB views, no access
+        control mechanism exists that can restrict the value of
+        this object to identify only those objects that exist
+        in a particular MIB view.  Because there is thus no
+        acceptable means of restricting the read access that
+        could be obtained through the alarm mechanism, the
+        probe must only grant write access to this object in
+
+        those views that have read access to all objects on
+        the probe.
+
+        During a set operation, if the supplied variable name is
+        not available in the selected MIB view, a badValue error
+        must be returned.  If at any time the variable name of
+        an established alarmEntry is no longer available in the
+        selected MIB view, the probe must change the status of
+        this alarmEntry to invalid(4).
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 3 }
+
+alarmSampleType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 absoluteValue(1),
+                 deltaValue(2)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The method of sampling the selected variable and
+        calculating the value to be compared against the
+        thresholds.  If the value of this object is
+        absoluteValue(1), the value of the selected variable
+        will be compared directly with the thresholds at the
+        end of the sampling interval.  If the value of this
+        object is deltaValue(2), the value of the selected
+        variable at the last sample will be subtracted from
+        the current value, and the difference compared with
+        the thresholds.
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 4 }
+
+alarmValue OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of the statistic during the last sampling
+        period.  For example, if the sample type is deltaValue,
+        this value will be the difference between the samples
+        at the beginning and end of the period.  If the sample
+        type is absoluteValue, this value will be the sampled
+        value at the end of the period.
+
+        This is the value that is compared with the rising and
+        falling thresholds.
+
+        The value during the current sampling period is not
+        made available until the period is completed and will
+        remain available until the next period completes."
+    ::= { alarmEntry 5 }
+
+alarmStartupAlarm OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 risingAlarm(1),
+                 fallingAlarm(2),
+                 risingOrFallingAlarm(3)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The alarm that may be sent when this entry is first
+        set to valid.  If the first sample after this entry
+        becomes valid is greater than or equal to the
+        risingThreshold and alarmStartupAlarm is equal to
+        risingAlarm(1) or risingOrFallingAlarm(3), then a single
+        rising alarm will be generated.  If the first sample
+        after this entry becomes valid is less than or equal
+        to the fallingThreshold and alarmStartupAlarm is equal
+        to fallingAlarm(2) or risingOrFallingAlarm(3), then a
+        single falling alarm will be generated.
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 6 }
+
+alarmRisingThreshold OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "A threshold for the sampled statistic.  When the current
+        sampled value is greater than or equal to this threshold,
+        and the value at the last sampling interval was less than
+        this threshold, a single event will be generated.
+        A single event will also be generated if the first
+        sample after this entry becomes valid is greater than or
+        equal to this threshold and the associated
+        alarmStartupAlarm is equal to risingAlarm(1) or
+        risingOrFallingAlarm(3).
+
+        After a rising event is generated, another such event
+
+        will not be generated until the sampled value
+        falls below this threshold and reaches the
+        alarmFallingThreshold.
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 7 }
+
+alarmFallingThreshold OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "A threshold for the sampled statistic.  When the current
+        sampled value is less than or equal to this threshold,
+        and the value at the last sampling interval was greater than
+        this threshold, a single event will be generated.
+        A single event will also be generated if the first
+        sample after this entry becomes valid is less than or
+        equal to this threshold and the associated
+        alarmStartupAlarm is equal to fallingAlarm(2) or
+        risingOrFallingAlarm(3).
+
+        After a falling event is generated, another such event
+        will not be generated until the sampled value
+        rises above this threshold and reaches the
+        alarmRisingThreshold.
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 8 }
+
+alarmRisingEventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The index of the eventEntry that is
+        used when a rising threshold is crossed.  The
+        eventEntry identified by a particular value of
+        this index is the same as identified by the same value
+        of the eventIndex object.  If there is no
+        corresponding entry in the eventTable, then
+        no association exists.  In particular, if this value
+        is zero, no associated event will be generated, as
+        zero is not a valid event index.
+
+        This object may not be modified if the associated
+
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 9 }
+
+alarmFallingEventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The index of the eventEntry that is
+        used when a falling threshold is crossed.  The
+        eventEntry identified by a particular value of
+        this index is the same as identified by the same value
+        of the eventIndex object.  If there is no
+        corresponding entry in the eventTable, then
+        no association exists.  In particular, if this value
+        is zero, no associated event will be generated, as
+        zero is not a valid event index.
+
+        This object may not be modified if the associated
+        alarmStatus object is equal to valid(1)."
+    ::= { alarmEntry 10 }
+
+alarmOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { alarmEntry 11 }
+
+alarmStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this alarm entry."
+    ::= { alarmEntry 12 }
+
+-- The Host Group
+
+-- Implementation of the Host group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The host group discovers new hosts on the network by
+-- keeping a list of source and destination MAC Addresses seen
+-- in good packets.  For each of these addresses, the host group
+
+-- keeps a set of statistics.  The hostControlTable controls
+-- which interfaces this function is performed on, and contains
+-- some information about the process.  On behalf of each
+-- hostControlEntry, data is collected on an interface and placed
+-- in both the hostTable and the hostTimeTable.  If the
+-- monitoring device finds itself short of resources, it may
+-- delete entries as needed.  It is suggested that the device
+-- delete the least recently used entries first.
+
+-- The hostTable contains entries for each address discovered on
+-- a particular interface.  Each entry contains statistical
+-- data about that host.  This table is indexed by the
+-- MAC address of the host, through which a random access
+-- may be achieved.
+
+-- The hostTimeTable contains data in the same format as the
+-- hostTable, and must contain the same set of hosts, but is
+-- indexed using hostTimeCreationOrder rather than hostAddress.
+-- The hostTimeCreationOrder is an integer which reflects
+-- the relative order in which a particular entry was discovered
+-- and thus inserted into the table.  As this order, and thus
+-- the index, is among those entries currently in the table,
+-- the index for a particular entry may change if an
+-- (earlier) entry is deleted.  Thus the association between
+-- hostTimeCreationOrder and hostTimeEntry may be broken at
+-- any time.
+
+-- The hostTimeTable has two important uses.  The first is the
+-- fast download of this potentially large table.  Because the
+-- index of this table runs from 1 to the size of the table,
+-- inclusive, its values are predictable.  This allows very
+-- efficient packing of variables into SNMP PDU's and allows
+-- a table transfer to have multiple packets outstanding.
+-- These benefits increase transfer rates tremendously.
+
+-- The second use of the hostTimeTable is the efficient discovery
+-- by the management station of new entries added to the table.
+-- After the management station has downloaded the entire table,
+-- it knows that new entries will be added immediately after the
+-- end of the current table.  It can thus detect new entries there
+-- and retrieve them easily.
+
+-- Because the association between hostTimeCreationOrder and
+-- hostTimeEntry may be broken at any time, the management
+-- station must monitor the related hostControlLastDeleteTime
+-- object.  When the management station thus detects a deletion,
+-- it must assume that any such associations have been broken,
+-- and invalidate any it has stored locally.  This includes
+
+-- restarting any download of the hostTimeTable that may have been
+-- in progress, as well as rediscovering the end of the
+-- hostTimeTable so that it may detect new entries.  If the
+-- management station does not detect the broken association,
+-- it may continue to refer to a particular host by its
+-- creationOrder while unwittingly retrieving the data associated
+-- with another host entirely.  If this happens while downloading
+-- the host table, the management station may fail to download
+-- all of the entries in the table.
+
+hostControlTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of host table control entries."
+    ::= { hosts 1 }
+
+hostControlEntry OBJECT-TYPE
+    SYNTAX     HostControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of parameters that set up the discovery of hosts
+        on a particular interface and the collection of statistics
+        about these hosts.  For example, an instance of the
+        hostControlTableSize object might be named
+        hostControlTableSize.1"
+    INDEX { hostControlIndex }
+    ::= { hostControlTable 1 }
+
+HostControlEntry ::= SEQUENCE {
+
+    hostControlIndex            Integer32,
+    hostControlDataSource       OBJECT IDENTIFIER,
+    hostControlTableSize        Integer32,
+    hostControlLastDeleteTime   TimeTicks,
+    hostControlOwner            OwnerString,
+    hostControlStatus           EntryStatus
+}
+
+hostControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+
+        hostControl table.  Each such entry defines
+        a function that discovers hosts on a particular interface
+        and places statistics about them in the hostTable and
+        the hostTimeTable on behalf of this hostControlEntry."
+    ::= { hostControlEntry 1 }
+
+hostControlDataSource OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the source of the data for
+        this instance of the host function.  This source
+        can be any interface on this device.  In order
+        to identify a particular interface, this object shall
+        identify the instance of the ifIndex object, defined
+        in RFC 2233 [17], for the desired interface.
+        For example, if an entry were to receive data from
+        interface #1, this object would be set to ifIndex.1.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the identified
+        interface.
+
+        An agent may or may not be able to tell if fundamental
+        changes to the media of the interface have occurred and
+        necessitate an invalidation of this entry.  For example, a
+        hot-pluggable ethernet card could be pulled out and replaced
+        by a token-ring card.  In such a case, if the agent has such
+        knowledge of the change, it is recommended that it
+        invalidate this entry.
+
+        This object may not be modified if the associated
+        hostControlStatus object is equal to valid(1)."
+    ::= { hostControlEntry 2 }
+
+hostControlTableSize OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of hostEntries in the hostTable and the
+        hostTimeTable associated with this hostControlEntry."
+    ::= { hostControlEntry 3 }
+
+hostControlLastDeleteTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when the last entry
+        was deleted from the portion of the hostTable
+        associated with this hostControlEntry.  If no
+        deletions have occurred, this value shall be zero."
+    ::= { hostControlEntry 4 }
+
+hostControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { hostControlEntry 5 }
+
+hostControlStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this hostControl entry.
+
+        If this object is not equal to valid(1), all associated
+        entries in the hostTable, hostTimeTable, and the
+        hostTopNTable shall be deleted by the agent."
+    ::= { hostControlEntry 6 }
+
+hostTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of host entries."
+    ::= { hosts 2 }
+
+hostEntry OBJECT-TYPE
+    SYNTAX     HostEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A collection of statistics for a particular host that has
+        been discovered on an interface of this device.  For example,
+        an instance of the hostOutBroadcastPkts object might be
+        named hostOutBroadcastPkts.1.6.8.0.32.27.3.176"
+    INDEX { hostIndex, hostAddress }
+    ::= { hostTable 1 }
+
+HostEntry ::= SEQUENCE {
+    hostAddress             OCTET STRING,
+    hostCreationOrder       Integer32,
+    hostIndex               Integer32,
+    hostInPkts              Counter32,
+    hostOutPkts             Counter32,
+    hostInOctets            Counter32,
+    hostOutOctets           Counter32,
+    hostOutErrors           Counter32,
+    hostOutBroadcastPkts    Counter32,
+    hostOutMulticastPkts    Counter32
+}
+
+hostAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The physical address of this host."
+    ::= { hostEntry 1 }
+
+hostCreationOrder OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that defines the relative ordering of
+        the creation time of hosts captured for a
+        particular hostControlEntry.  This index shall
+        be between 1 and N, where N is the value of
+        the associated hostControlTableSize.  The ordering
+        of the indexes is based on the order of each entry's
+        insertion into the table, in which entries added earlier
+        have a lower index value than entries added later.
+
+        It is important to note that the order for a
+        particular entry may change as an (earlier) entry
+        is deleted from the table.  Because this order may
+        change, management stations should make use of the
+        hostControlLastDeleteTime variable in the
+        hostControlEntry associated with the relevant
+        portion of the hostTable.  By observing
+        this variable, the management station may detect
+        the circumstances where a previous association
+        between a value of hostCreationOrder
+        and a hostEntry may no longer hold."
+    ::= { hostEntry 2 }
+
+hostIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The set of collected host statistics of which
+        this entry is a part.  The set of hosts
+        identified by a particular value of this
+        index is associated with the hostControlEntry
+        as identified by the same value of hostControlIndex."
+    ::= { hostEntry 3 }
+
+hostInPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted to this
+        address since it was added to the hostTable."
+    ::= { hostEntry 4 }
+
+hostOutPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets, including bad packets, transmitted
+        by this address since it was added to the hostTable."
+    ::= { hostEntry 5 }
+
+hostInOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted to this address since
+        it was added to the hostTable (excluding framing
+        bits but including FCS octets), except for those
+        octets in bad packets."
+    ::= { hostEntry 6 }
+
+hostOutOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted by this address since
+        it was added to the hostTable (excluding framing
+        bits but including FCS octets), including those
+        octets in bad packets."
+    ::= { hostEntry 7 }
+
+hostOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of bad packets transmitted by this address
+        since this host was added to the hostTable."
+    ::= { hostEntry 8 }
+
+hostOutBroadcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted by this
+        address that were directed to the broadcast address
+        since this host was added to the hostTable."
+    ::= { hostEntry 9 }
+
+hostOutMulticastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted by this
+        address that were directed to a multicast address
+        since this host was added to the hostTable.
+        Note that this number does not include packets
+        directed to the broadcast address."
+    ::= { hostEntry 10 }
+
+-- host Time Table
+
+hostTimeTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostTimeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of time-ordered host table entries."
+    ::= { hosts 3 }
+
+hostTimeEntry OBJECT-TYPE
+    SYNTAX     HostTimeEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A collection of statistics for a particular host that has
+        been discovered on an interface of this device.  This
+        collection includes the relative ordering of the creation
+        time of this object.  For example, an instance of the
+        hostTimeOutBroadcastPkts object might be named
+        hostTimeOutBroadcastPkts.1.687"
+    INDEX { hostTimeIndex, hostTimeCreationOrder }
+    ::= { hostTimeTable 1 }
+
+HostTimeEntry ::= SEQUENCE {
+    hostTimeAddress              OCTET STRING,
+    hostTimeCreationOrder        Integer32,
+    hostTimeIndex                Integer32,
+    hostTimeInPkts               Counter32,
+    hostTimeOutPkts              Counter32,
+    hostTimeInOctets             Counter32,
+    hostTimeOutOctets            Counter32,
+    hostTimeOutErrors            Counter32,
+    hostTimeOutBroadcastPkts     Counter32,
+    hostTimeOutMulticastPkts     Counter32
+}
+
+hostTimeAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The physical address of this host."
+    ::= { hostTimeEntry 1 }
+
+hostTimeCreationOrder OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in
+        the hostTime table among those entries associated
+        with the same hostControlEntry.  This index shall
+        be between 1 and N, where N is the value of
+
+        the associated hostControlTableSize.  The ordering
+        of the indexes is based on the order of each entry's
+        insertion into the table, in which entries added earlier
+        have a lower index value than entries added later.
+        Thus the management station has the ability to
+        learn of new entries added to this table without
+        downloading the entire table.
+
+        It is important to note that the index for a
+        particular entry may change as an (earlier) entry
+        is deleted from the table.  Because this order may
+        change, management stations should make use of the
+        hostControlLastDeleteTime variable in the
+        hostControlEntry associated with the relevant
+        portion of the hostTimeTable.  By observing
+        this variable, the management station may detect
+        the circumstances where a download of the table
+        may have missed entries, and where a previous
+        association between a value of hostTimeCreationOrder
+        and a hostTimeEntry may no longer hold."
+    ::= { hostTimeEntry 2 }
+
+hostTimeIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The set of collected host statistics of which
+        this entry is a part.  The set of hosts
+        identified by a particular value of this
+        index is associated with the hostControlEntry
+        as identified by the same value of hostControlIndex."
+    ::= { hostTimeEntry 3 }
+
+hostTimeInPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted to this
+        address since it was added to the hostTimeTable."
+    ::= { hostTimeEntry 4 }
+
+hostTimeOutPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets, including bad packets, transmitted
+        by this address since it was added to the hostTimeTable."
+    ::= { hostTimeEntry 5 }
+
+hostTimeInOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted to this address since
+        it was added to the hostTimeTable (excluding framing
+        bits but including FCS octets), except for those
+        octets in bad packets."
+    ::= { hostTimeEntry 6 }
+
+hostTimeOutOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets transmitted by this address since
+        it was added to the hostTimeTable (excluding framing
+        bits but including FCS octets), including those
+        octets in bad packets."
+    ::= { hostTimeEntry 7 }
+
+hostTimeOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of bad packets transmitted by this address
+        since this host was added to the hostTimeTable."
+    ::= { hostTimeEntry 8 }
+
+hostTimeOutBroadcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted by this
+        address that were directed to the broadcast address
+
+        since this host was added to the hostTimeTable."
+    ::= { hostTimeEntry 9 }
+
+hostTimeOutMulticastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of good packets transmitted by this
+        address that were directed to a multicast address
+        since this host was added to the hostTimeTable.
+        Note that this number does not include packets directed
+        to the broadcast address."
+    ::= { hostTimeEntry 10 }
+
+-- The Host Top "N" Group
+
+-- Implementation of the Host Top N group is optional. The Host Top N
+-- group requires the implementation of the host group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Host Top N group is used to prepare reports that describe
+-- the hosts that top a list ordered by one of their statistics.
+-- The available statistics are samples of one of their
+-- base statistics, over an interval specified by the management
+-- station.  Thus, these statistics are rate based.  The management
+-- station also selects how many such hosts are reported.
+
+-- The hostTopNControlTable is used to initiate the generation of
+-- such a report.  The management station may select the parameters
+-- of such a report, such as which interface, which statistic,
+-- how many hosts, and the start and stop times of the sampling.
+-- When the report is prepared, entries are created in the
+-- hostTopNTable associated with the relevant hostTopNControlEntry.
+-- These entries are static for each report after it has been
+-- prepared.
+
+hostTopNControlTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostTopNControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of top N host control entries."
+    ::= { hostTopN 1 }
+
+hostTopNControlEntry OBJECT-TYPE
+    SYNTAX     HostTopNControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of parameters that control the creation of a report
+        of the top N hosts according to several metrics.  For
+        example, an instance of the hostTopNDuration object might
+        be named hostTopNDuration.3"
+    INDEX { hostTopNControlIndex }
+    ::= { hostTopNControlTable 1 }
+
+HostTopNControlEntry ::= SEQUENCE {
+    hostTopNControlIndex    Integer32,
+    hostTopNHostIndex       Integer32,
+    hostTopNRateBase        INTEGER,
+    hostTopNTimeRemaining   Integer32,
+    hostTopNDuration        Integer32,
+    hostTopNRequestedSize   Integer32,
+    hostTopNGrantedSize     Integer32,
+    hostTopNStartTime       TimeTicks,
+    hostTopNOwner           OwnerString,
+    hostTopNStatus          EntryStatus
+}
+
+hostTopNControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the hostTopNControl table.  Each such
+        entry defines one top N report prepared for
+        one interface."
+    ::= { hostTopNControlEntry 1 }
+
+hostTopNHostIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The host table for which a top N report will be prepared
+        on behalf of this entry.  The host table identified by a
+        particular value of this index is associated with the same
+        host table as identified by the same value of
+        hostIndex.
+
+        This object may not be modified if the associated
+        hostTopNStatus object is equal to valid(1)."
+    ::= { hostTopNControlEntry 2 }
+
+hostTopNRateBase OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 hostTopNInPkts(1),
+                 hostTopNOutPkts(2),
+                 hostTopNInOctets(3),
+                 hostTopNOutOctets(4),
+                 hostTopNOutErrors(5),
+                 hostTopNOutBroadcastPkts(6),
+                 hostTopNOutMulticastPkts(7)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The variable for each host that the hostTopNRate
+        variable is based upon.
+
+        This object may not be modified if the associated
+        hostTopNStatus object is equal to valid(1)."
+    ::= { hostTopNControlEntry 3 }
+
+hostTopNTimeRemaining OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The number of seconds left in the report currently being
+        collected.  When this object is modified by the management
+        station, a new collection is started, possibly aborting
+        a currently running report.  The new value is used
+        as the requested duration of this report, which is
+        loaded into the associated hostTopNDuration object.
+
+        When this object is set to a non-zero value, any
+        associated hostTopNEntries shall be made
+        inaccessible by the monitor.  While the value of this
+        object is non-zero, it decrements by one per second until
+        it reaches zero.  During this time, all associated
+        hostTopNEntries shall remain inaccessible.  At the time
+        that this object decrements to zero, the report is made
+        accessible in the hostTopNTable.  Thus, the hostTopN
+        table needs to be created only at the end of the collection
+        interval."
+    DEFVAL { 0 }
+    ::= { hostTopNControlEntry 4 }
+
+hostTopNDuration OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of seconds that this report has collected
+        during the last sampling interval, or if this
+        report is currently being collected, the number
+        of seconds that this report is being collected
+        during this sampling interval.
+
+        When the associated hostTopNTimeRemaining object is set,
+        this object shall be set by the probe to the same value
+        and shall not be modified until the next time
+        the hostTopNTimeRemaining is set.
+
+        This value shall be zero if no reports have been
+        requested for this hostTopNControlEntry."
+    DEFVAL { 0 }
+    ::= { hostTopNControlEntry 5 }
+
+hostTopNRequestedSize OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of hosts requested for the top N
+        table.
+
+        When this object is created or modified, the probe
+        should set hostTopNGrantedSize as closely to this
+        object as is possible for the particular probe
+        implementation and available resources."
+    DEFVAL { 10 }
+    ::= { hostTopNControlEntry 6 }
+
+hostTopNGrantedSize OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of hosts in the top N table.
+
+        When the associated hostTopNRequestedSize object is
+        created or modified, the probe should set this
+        object as closely to the requested value as is possible
+        for the particular implementation and available
+
+        resources. The probe must not lower this value except
+        as a result of a set to the associated
+        hostTopNRequestedSize object.
+
+        Hosts with the highest value of hostTopNRate shall be
+        placed in this table in decreasing order of this rate
+        until there is no more room or until there are no more
+        hosts."
+    ::= { hostTopNControlEntry 7 }
+
+hostTopNStartTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this top N report was
+        last started.  In other words, this is the time that
+        the associated hostTopNTimeRemaining object was
+        modified to start the requested report."
+    ::= { hostTopNControlEntry 8 }
+
+hostTopNOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { hostTopNControlEntry 9 }
+
+hostTopNStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this hostTopNControl entry.
+
+        If this object is not equal to valid(1), all associated
+        hostTopNEntries shall be deleted by the agent."
+    ::= { hostTopNControlEntry 10 }
+
+hostTopNTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of top N host entries."
+    ::= { hostTopN 2 }
+
+hostTopNEntry OBJECT-TYPE
+    SYNTAX     HostTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of statistics for a host that is part of a top N
+        report.  For example, an instance of the hostTopNRate
+        object might be named hostTopNRate.3.10"
+    INDEX { hostTopNReport, hostTopNIndex }
+    ::= { hostTopNTable 1 }
+
+HostTopNEntry ::= SEQUENCE {
+    hostTopNReport                Integer32,
+    hostTopNIndex                 Integer32,
+    hostTopNAddress               OCTET STRING,
+    hostTopNRate                  Integer32
+}
+
+hostTopNReport OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the top N report of which
+        this entry is a part.  The set of hosts
+        identified by a particular value of this
+        object is part of the same report as identified
+        by the same value of the hostTopNControlIndex object."
+    ::= { hostTopNEntry 1 }
+
+hostTopNIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in
+        the hostTopN table among those in the same report.
+        This index is between 1 and N, where N is the
+        number of entries in this table.  Increasing values
+        of hostTopNIndex shall be assigned to entries with
+        decreasing values of hostTopNRate until index N
+        is assigned to the entry with the lowest value of
+        hostTopNRate or there are no more hostTopNEntries."
+    ::= { hostTopNEntry 2 }
+
+hostTopNAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The physical address of this host."
+    ::= { hostTopNEntry 3 }
+
+hostTopNRate OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of change in the selected variable
+        during this sampling interval.  The selected
+        variable is this host's instance of the object
+        selected by hostTopNRateBase."
+    ::= { hostTopNEntry 4 }
+
+-- The Matrix Group
+
+-- Implementation of the Matrix group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Matrix group consists of the matrixControlTable, matrixSDTable
+-- and the matrixDSTable.  These tables store statistics for a
+-- particular conversation between two addresses.  As the device
+-- detects a new conversation, including those to a non-unicast
+-- address, it creates a new entry in both of the matrix tables.
+-- It must only create new entries based on information
+-- received in good packets.  If the monitoring device finds
+-- itself short of resources, it may delete entries as needed.
+-- It is suggested that the device delete the least recently used
+-- entries first.
+
+matrixControlTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MatrixControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of information entries for the
+        traffic matrix on each interface."
+    ::= { matrix 1 }
+
+matrixControlEntry OBJECT-TYPE
+    SYNTAX     MatrixControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Information about a traffic matrix on a particular
+
+        interface.  For example, an instance of the
+        matrixControlLastDeleteTime object might be named
+        matrixControlLastDeleteTime.1"
+    INDEX { matrixControlIndex }
+    ::= { matrixControlTable 1 }
+
+MatrixControlEntry ::= SEQUENCE {
+    matrixControlIndex           Integer32,
+    matrixControlDataSource      OBJECT IDENTIFIER,
+    matrixControlTableSize       Integer32,
+    matrixControlLastDeleteTime  TimeTicks,
+    matrixControlOwner           OwnerString,
+    matrixControlStatus          EntryStatus
+}
+
+matrixControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        matrixControl table.  Each such entry defines
+        a function that discovers conversations on a particular
+        interface and places statistics about them in the
+        matrixSDTable and the matrixDSTable on behalf of this
+        matrixControlEntry."
+    ::= { matrixControlEntry 1 }
+
+matrixControlDataSource OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the source of
+        the data from which this entry creates a traffic matrix.
+        This source can be any interface on this device.  In
+        order to identify a particular interface, this object
+        shall identify the instance of the ifIndex object,
+        defined in RFC 2233 [17], for the desired
+        interface.  For example, if an entry were to receive data
+        from interface #1, this object would be set to ifIndex.1.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the identified
+        interface.
+
+        An agent may or may not be able to tell if fundamental
+        changes to the media of the interface have occurred and
+
+        necessitate an invalidation of this entry.  For example, a
+        hot-pluggable ethernet card could be pulled out and replaced
+        by a token-ring card.  In such a case, if the agent has such
+        knowledge of the change, it is recommended that it
+        invalidate this entry.
+
+        This object may not be modified if the associated
+        matrixControlStatus object is equal to valid(1)."
+    ::= { matrixControlEntry 2 }
+
+matrixControlTableSize OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of matrixSDEntries in the matrixSDTable
+        for this interface.  This must also be the value of
+        the number of entries in the matrixDSTable for this
+        interface."
+    ::= { matrixControlEntry 3 }
+
+matrixControlLastDeleteTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when the last entry
+        was deleted from the portion of the matrixSDTable
+        or matrixDSTable associated with this matrixControlEntry.
+        If no deletions have occurred, this value shall be
+        zero."
+    ::= { matrixControlEntry 4 }
+
+matrixControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { matrixControlEntry 5 }
+
+matrixControlStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this matrixControl entry.
+
+        If this object is not equal to valid(1), all associated
+        entries in the matrixSDTable and the matrixDSTable
+        shall be deleted by the agent."
+    ::= { matrixControlEntry 6 }
+
+matrixSDTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MatrixSDEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of traffic matrix entries indexed by
+        source and destination MAC address."
+    ::= { matrix 2 }
+
+matrixSDEntry OBJECT-TYPE
+    SYNTAX     MatrixSDEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A collection of statistics for communications between
+        two addresses on a particular interface.  For example,
+        an instance of the matrixSDPkts object might be named
+        matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113"
+    INDEX { matrixSDIndex,
+            matrixSDSourceAddress, matrixSDDestAddress }
+    ::= { matrixSDTable 1 }
+
+MatrixSDEntry ::= SEQUENCE {
+    matrixSDSourceAddress       OCTET STRING,
+    matrixSDDestAddress         OCTET STRING,
+    matrixSDIndex               Integer32,
+    matrixSDPkts                Counter32,
+    matrixSDOctets              Counter32,
+    matrixSDErrors              Counter32
+}
+
+matrixSDSourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The source physical address."
+    ::= { matrixSDEntry 1 }
+
+matrixSDDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The destination physical address."
+    ::= { matrixSDEntry 2 }
+
+matrixSDIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The set of collected matrix statistics of which
+        this entry is a part.  The set of matrix statistics
+        identified by a particular value of this index
+        is associated with the same matrixControlEntry
+        as identified by the same value of matrixControlIndex."
+    ::= { matrixSDEntry 3 }
+
+matrixSDPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets transmitted from the source
+        address to the destination address (this number includes
+        bad packets)."
+    ::= { matrixSDEntry 4 }
+
+matrixSDOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets (excluding framing bits but
+        including FCS octets) contained in all packets
+        transmitted from the source address to the
+        destination address."
+    ::= { matrixSDEntry 5 }
+
+matrixSDErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of bad packets transmitted from
+        the source address to the destination address."
+    ::= { matrixSDEntry 6 }
+
+-- Traffic matrix tables from destination to source
+
+matrixDSTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MatrixDSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of traffic matrix entries indexed by
+        destination and source MAC address."
+    ::= { matrix 3 }
+
+matrixDSEntry OBJECT-TYPE
+    SYNTAX     MatrixDSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A collection of statistics for communications between
+        two addresses on a particular interface.  For example,
+        an instance of the matrixSDPkts object might be named
+        matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176"
+    INDEX { matrixDSIndex,
+            matrixDSDestAddress, matrixDSSourceAddress }
+    ::= { matrixDSTable 1 }
+
+MatrixDSEntry ::= SEQUENCE {
+    matrixDSSourceAddress       OCTET STRING,
+    matrixDSDestAddress         OCTET STRING,
+    matrixDSIndex               Integer32,
+    matrixDSPkts                Counter32,
+    matrixDSOctets              Counter32,
+    matrixDSErrors              Counter32
+}
+
+matrixDSSourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The source physical address."
+    ::= { matrixDSEntry 1 }
+
+matrixDSDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The destination physical address."
+    ::= { matrixDSEntry 2 }
+
+matrixDSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The set of collected matrix statistics of which
+        this entry is a part.  The set of matrix statistics
+        identified by a particular value of this index
+        is associated with the same matrixControlEntry
+        as identified by the same value of matrixControlIndex."
+    ::= { matrixDSEntry 3 }
+
+matrixDSPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets transmitted from the source
+        address to the destination address (this number includes
+        bad packets)."
+    ::= { matrixDSEntry 4 }
+
+matrixDSOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets (excluding framing bits
+        but including FCS octets) contained in all packets
+        transmitted from the source address to the
+        destination address."
+    ::= { matrixDSEntry 5 }
+
+matrixDSErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of bad packets transmitted from
+        the source address to the destination address."
+    ::= { matrixDSEntry 6 }
+
+-- The Filter Group
+
+-- Implementation of the Filter group is optional.
+
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Filter group allows packets to be captured with an
+-- arbitrary filter expression.  A logical data and
+-- event stream or "channel" is formed by the packets
+-- that match the filter expression.
+--
+-- This filter mechanism allows the creation of an arbitrary
+-- logical expression with which to filter packets.  Each
+-- filter associated with a channel is OR'ed with the others.
+-- Within a filter, any bits checked in the data and status are
+-- AND'ed with respect to other bits in the same filter.  The
+-- NotMask also allows for checking for inequality.  Finally,
+-- the channelAcceptType object allows for inversion of the
+-- whole equation.
+--
+-- If a management station wishes to receive a trap to alert it
+-- that new packets have been captured and are available for
+-- download, it is recommended that it set up an alarm entry that
+-- monitors the value of the relevant channelMatches instance.
+--
+-- The channel can be turned on or off, and can also
+-- generate events when packets pass through it.
+
+filterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF FilterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of packet filter entries."
+    ::= { filter 1 }
+
+filterEntry OBJECT-TYPE
+    SYNTAX     FilterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of parameters for a packet filter applied on a
+        particular interface.  As an example, an instance of the
+        filterPktData object might be named filterPktData.12"
+    INDEX { filterIndex }
+    ::= { filterTable 1 }
+
+FilterEntry ::= SEQUENCE {
+    filterIndex                 Integer32,
+    filterChannelIndex          Integer32,
+    filterPktDataOffset         Integer32,
+    filterPktData               OCTET STRING,
+    filterPktDataMask           OCTET STRING,
+    filterPktDataNotMask        OCTET STRING,
+    filterPktStatus             Integer32,
+    filterPktStatusMask         Integer32,
+    filterPktStatusNotMask      Integer32,
+    filterOwner                 OwnerString,
+    filterStatus                EntryStatus
+}
+
+filterIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the filter table.  Each such entry defines
+        one filter that is to be applied to every packet
+        received on an interface."
+    ::= { filterEntry 1 }
+
+filterChannelIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object identifies the channel of which this filter
+        is a part.  The filters identified by a particular value
+        of this object are associated with the same channel as
+        identified by the same value of the channelIndex object."
+    ::= { filterEntry 2 }
+
+filterPktDataOffset OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The offset from the beginning of each packet where
+        a match of packet data will be attempted.  This offset
+        is measured from the point in the physical layer
+        packet after the framing bits, if any.  For example,
+        in an Ethernet frame, this point is at the beginning of
+        the destination MAC address.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    DEFVAL { 0 }
+    ::= { filterEntry 3 }
+
+filterPktData OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The data that is to be matched with the input packet.
+        For each packet received, this filter and the accompanying
+        filterPktDataMask and filterPktDataNotMask will be
+        adjusted for the offset.  The only bits relevant to this
+        match algorithm are those that have the corresponding
+        filterPktDataMask bit equal to one.  The following three
+        rules are then applied to every packet:
+
+        (1) If the packet is too short and does not have data
+            corresponding to part of the filterPktData, the packet
+            will fail this data match.
+
+        (2) For each relevant bit from the packet with the
+            corresponding filterPktDataNotMask bit set to zero, if
+            the bit from the packet is not equal to the corresponding
+            bit from the filterPktData, then the packet will fail
+            this data match.
+
+        (3) If for every relevant bit from the packet with the
+            corresponding filterPktDataNotMask bit set to one, the
+            bit from the packet is equal to the corresponding bit
+            from the filterPktData, then the packet will fail this
+            data match.
+
+        Any packets that have not failed any of the three matches
+        above have passed this data match.  In particular, a zero
+        length filter will match any packet.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    ::= { filterEntry 4 }
+
+filterPktDataMask OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The mask that is applied to the match process.
+        After adjusting this mask for the offset, only those
+        bits in the received packet that correspond to bits set
+        in this mask are relevant for further processing by the
+
+        match algorithm.  The offset is applied to filterPktDataMask
+        in the same way it is applied to the filter.  For the
+        purposes of the matching algorithm, if the associated
+        filterPktData object is longer than this mask, this mask is
+        conceptually extended with '1' bits until it reaches the
+        length of the filterPktData object.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    ::= { filterEntry 5 }
+
+filterPktDataNotMask OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The inversion mask that is applied to the match
+        process.  After adjusting this mask for the offset,
+        those relevant bits in the received packet that correspond
+        to bits cleared in this mask must all be equal to their
+        corresponding bits in the filterPktData object for the packet
+        to be accepted.  In addition, at least one of those relevant
+        bits in the received packet that correspond to bits set in
+        this mask must be different to its corresponding bit in the
+        filterPktData object.
+
+        For the purposes of the matching algorithm, if the associated
+        filterPktData object is longer than this mask, this mask is
+        conceptually extended with '0' bits until it reaches the
+        length of the filterPktData object.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    ::= { filterEntry 6 }
+
+filterPktStatus OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status that is to be matched with the input packet.
+        The only bits relevant to this match algorithm are those that
+        have the corresponding filterPktStatusMask bit equal to one.
+        The following two rules are then applied to every packet:
+
+        (1) For each relevant bit from the packet status with the
+            corresponding filterPktStatusNotMask bit set to zero, if
+            the bit from the packet status is not equal to the
+
+            corresponding bit from the filterPktStatus, then the
+            packet will fail this status match.
+
+        (2) If for every relevant bit from the packet status with the
+            corresponding filterPktStatusNotMask bit set to one, the
+            bit from the packet status is equal to the corresponding
+            bit from the filterPktStatus, then the packet will fail
+            this status match.
+
+        Any packets that have not failed either of the two matches
+        above have passed this status match.  In particular, a zero
+        length status filter will match any packet's status.
+
+        The value of the packet status is a sum.  This sum
+        initially takes the value zero.  Then, for each
+        error, E, that has been discovered in this packet,
+        2 raised to a value representing E is added to the sum.
+        The errors and the bits that represent them are dependent
+        on the media type of the interface that this channel
+        is receiving packets from.
+
+        The errors defined for a packet captured off of an
+        Ethernet interface are as follows:
+
+            bit #    Error
+                0    Packet is longer than 1518 octets
+                1    Packet is shorter than 64 octets
+                2    Packet experienced a CRC or Alignment error
+
+        For example, an Ethernet fragment would have a
+        value of 6 (2^1 + 2^2).
+
+        As this MIB is expanded to new media types, this object
+        will have other media-specific errors defined.
+
+        For the purposes of this status matching algorithm, if the
+        packet status is longer than this filterPktStatus object,
+        this object is conceptually extended with '0' bits until it
+        reaches the size of the packet status.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    ::= { filterEntry 7 }
+
+filterPktStatusMask OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The mask that is applied to the status match process.
+        Only those bits in the received packet that correspond to
+        bits set in this mask are relevant for further processing
+        by the status match algorithm.  For the purposes
+        of the matching algorithm, if the associated filterPktStatus
+        object is longer than this mask, this mask is conceptually
+        extended with '1' bits until it reaches the size of the
+        filterPktStatus.  In addition, if a packet status is longer
+        than this mask, this mask is conceptually extended with '0'
+        bits until it reaches the size of the packet status.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    ::= { filterEntry 8 }
+
+filterPktStatusNotMask OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The inversion mask that is applied to the status match
+        process.  Those relevant bits in the received packet status
+        that correspond to bits cleared in this mask must all be
+        equal to their corresponding bits in the filterPktStatus
+        object for the packet to be accepted.  In addition, at least
+        one of those relevant bits in the received packet status
+        that correspond to bits set in this mask must be different
+        to its corresponding bit in the filterPktStatus object for
+        the packet to be accepted.
+
+        For the purposes of the matching algorithm, if the associated
+        filterPktStatus object or a packet status is longer than this
+        mask, this mask is conceptually extended with '0' bits until
+        it reaches the longer of the lengths of the filterPktStatus
+        object and the packet status.
+
+        This object may not be modified if the associated
+        filterStatus object is equal to valid(1)."
+    ::= { filterEntry 9 }
+
+filterOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { filterEntry 10 }
+
+filterStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this filter entry."
+    ::= { filterEntry 11 }
+
+channelTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF ChannelEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of packet channel entries."
+    ::= { filter 2 }
+
+channelEntry OBJECT-TYPE
+    SYNTAX     ChannelEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of parameters for a packet channel applied on a
+        particular interface.  As an example, an instance of the
+        channelMatches object might be named channelMatches.3"
+    INDEX { channelIndex }
+    ::= { channelTable 1 }
+
+ChannelEntry ::= SEQUENCE {
+    channelIndex                 Integer32,
+    channelIfIndex               Integer32,
+    channelAcceptType            INTEGER,
+    channelDataControl           INTEGER,
+    channelTurnOnEventIndex      Integer32,
+    channelTurnOffEventIndex     Integer32,
+    channelEventIndex            Integer32,
+    channelEventStatus           INTEGER,
+    channelMatches               Counter32,
+    channelDescription           DisplayString,
+    channelOwner                 OwnerString,
+    channelStatus                EntryStatus
+}
+
+channelIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the channel
+        table.  Each such entry defines one channel, a logical
+        data and event stream.
+
+        It is suggested that before creating a channel, an
+        application should scan all instances of the
+        filterChannelIndex object to make sure that there are no
+        pre-existing filters that would be inadvertently be linked
+        to the channel."
+    ::= { channelEntry 1 }
+
+channelIfIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The value of this object uniquely identifies the
+        interface on this remote network monitoring device to which
+        the associated filters are applied to allow data into this
+        channel.  The interface identified by a particular value
+        of this object is the same interface as identified by the
+        same value of the ifIndex object, defined in RFC 2233 [17].
+
+        The filters in this group are applied to all packets on
+        the local network segment attached to the identified
+        interface.
+
+        An agent may or may not be able to tell if fundamental
+        changes to the media of the interface have occurred and
+        necessitate an invalidation of this entry.  For example, a
+        hot-pluggable ethernet card could be pulled out and replaced
+        by a token-ring card.  In such a case, if the agent has such
+        knowledge of the change, it is recommended that it
+        invalidate this entry.
+
+        This object may not be modified if the associated
+        channelStatus object is equal to valid(1)."
+    ::= { channelEntry 2 }
+
+channelAcceptType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 acceptMatched(1),
+                 acceptFailed(2)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object controls the action of the filters
+        associated with this channel.  If this object is equal
+        to acceptMatched(1), packets will be accepted to this
+        channel if they are accepted by both the packet data and
+        packet status matches of an associated filter.  If
+        this object is equal to acceptFailed(2), packets will
+        be accepted to this channel only if they fail either
+        the packet data match or the packet status match of
+        each of the associated filters.
+
+        In particular, a channel with no associated filters will
+        match no packets if set to acceptMatched(1) case and will
+        match all packets in the acceptFailed(2) case.
+
+        This object may not be modified if the associated
+        channelStatus object is equal to valid(1)."
+    ::= { channelEntry 3 }
+
+channelDataControl OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 on(1),
+                 off(2)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object controls the flow of data through this channel.
+        If this object is on(1), data, status and events flow
+        through this channel.  If this object is off(2), data,
+        status and events will not flow through this channel."
+    DEFVAL { off }
+    ::= { channelEntry 4 }
+
+channelTurnOnEventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The value of this object identifies the event
+        that is configured to turn the associated
+        channelDataControl from off to on when the event is
+        generated.  The event identified by a particular value
+        of this object is the same event as identified by the
+        same value of the eventIndex object.  If there is no
+        corresponding entry in the eventTable, then no
+        association exists.  In fact, if no event is intended
+        for this channel, channelTurnOnEventIndex must be
+        set to zero, a non-existent event index.
+
+        This object may not be modified if the associated
+        channelStatus object is equal to valid(1)."
+    ::= { channelEntry 5 }
+
+channelTurnOffEventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The value of this object identifies the event
+        that is configured to turn the associated
+        channelDataControl from on to off when the event is
+        generated.  The event identified by a particular value
+        of this object is the same event as identified by the
+        same value of the eventIndex object.  If there is no
+        corresponding entry in the eventTable, then no
+        association exists.  In fact, if no event is intended
+        for this channel, channelTurnOffEventIndex must be
+        set to zero, a non-existent event index.
+
+        This object may not be modified if the associated
+        channelStatus object is equal to valid(1)."
+    ::= { channelEntry 6 }
+
+channelEventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The value of this object identifies the event
+        that is configured to be generated when the
+        associated channelDataControl is on and a packet
+        is matched.  The event identified by a particular value
+        of this object is the same event as identified by the
+        same value of the eventIndex object.  If there is no
+        corresponding entry in the eventTable, then no
+        association exists.  In fact, if no event is intended
+        for this channel, channelEventIndex must be
+        set to zero, a non-existent event index.
+
+        This object may not be modified if the associated
+        channelStatus object is equal to valid(1)."
+    ::= { channelEntry 7 }
+
+channelEventStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 eventReady(1),
+                 eventFired(2),
+                 eventAlwaysReady(3)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The event status of this channel.
+
+        If this channel is configured to generate events
+        when packets are matched, a means of controlling
+        the flow of those events is often needed.  When
+        this object is equal to eventReady(1), a single
+        event may be generated, after which this object
+        will be set by the probe to eventFired(2).  While
+        in the eventFired(2) state, no events will be
+        generated until the object is modified to
+        eventReady(1) (or eventAlwaysReady(3)).  The
+        management station can thus easily respond to a
+        notification of an event by re-enabling this object.
+
+        If the management station wishes to disable this
+        flow control and allow events to be generated
+        at will, this object may be set to
+        eventAlwaysReady(3).  Disabling the flow control
+        is discouraged as it can result in high network
+        traffic or other performance problems."
+    DEFVAL { eventReady }
+    ::= { channelEntry 8 }
+
+channelMatches OBJECT-TYPE
+    SYNTAX     Counter32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times this channel has matched a packet.
+        Note that this object is updated even when
+        channelDataControl is set to off."
+    ::= { channelEntry 9 }
+
+channelDescription OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..127))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "A comment describing this channel."
+    ::= { channelEntry 10 }
+
+channelOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { channelEntry 11 }
+
+channelStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this channel entry."
+    ::= { channelEntry 12 }
+
+-- The Packet Capture Group
+
+-- Implementation of the Packet Capture group is optional. The Packet
+-- Capture Group requires implementation of the Filter Group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Packet Capture group allows packets to be captured
+-- upon a filter match.  The bufferControlTable controls
+-- the captured packets output from a channel that is
+-- associated with it.  The captured packets are placed
+-- in entries in the captureBufferTable.  These entries are
+-- associated with the bufferControlEntry on whose behalf they
+-- were stored.
+
+bufferControlTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF BufferControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of buffers control entries."
+    ::= { capture 1 }
+
+bufferControlEntry OBJECT-TYPE
+    SYNTAX     BufferControlEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of parameters that control the collection of a stream
+        of packets that have matched filters.  As an example, an
+        instance of the bufferControlCaptureSliceSize object might
+        be named bufferControlCaptureSliceSize.3"
+    INDEX { bufferControlIndex }
+    ::= { bufferControlTable 1 }
+
+BufferControlEntry ::= SEQUENCE {
+    bufferControlIndex                Integer32,
+    bufferControlChannelIndex         Integer32,
+    bufferControlFullStatus           INTEGER,
+    bufferControlFullAction           INTEGER,
+    bufferControlCaptureSliceSize     Integer32,
+    bufferControlDownloadSliceSize    Integer32,
+    bufferControlDownloadOffset       Integer32,
+    bufferControlMaxOctetsRequested   Integer32,
+    bufferControlMaxOctetsGranted     Integer32,
+    bufferControlCapturedPackets      Integer32,
+    bufferControlTurnOnTime           TimeTicks,
+    bufferControlOwner                OwnerString,
+    bufferControlStatus               EntryStatus
+}
+
+bufferControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the bufferControl table.  The value of this
+        index shall never be zero.  Each such
+        entry defines one set of packets that is
+        captured and controlled by one or more filters."
+    ::= { bufferControlEntry 1 }
+
+bufferControlChannelIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "An index that identifies the channel that is the
+        source of packets for this bufferControl table.
+        The channel identified by a particular value of this
+        index is the same as identified by the same value of
+        the channelIndex object.
+
+        This object may not be modified if the associated
+        bufferControlStatus object is equal to valid(1)."
+    ::= { bufferControlEntry 2 }
+
+bufferControlFullStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+
+                 spaceAvailable(1),
+                 full(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This object shows whether the buffer has room to
+        accept new packets or if it is full.
+
+        If the status is spaceAvailable(1), the buffer is
+        accepting new packets normally.  If the status is
+        full(2) and the associated bufferControlFullAction
+        object is wrapWhenFull, the buffer is accepting new
+        packets by deleting enough of the oldest packets
+        to make room for new ones as they arrive.  Otherwise,
+        if the status is full(2) and the
+        bufferControlFullAction object is lockWhenFull,
+        then the buffer has stopped collecting packets.
+
+        When this object is set to full(2) the probe must
+        not later set it to spaceAvailable(1) except in the
+        case of a significant gain in resources such as
+        an increase of bufferControlOctetsGranted.  In
+        particular, the wrap-mode action of deleting old
+        packets to make room for newly arrived packets
+        must not affect the value of this object."
+    ::= { bufferControlEntry 3 }
+
+bufferControlFullAction OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 lockWhenFull(1),
+                 wrapWhenFull(2)    -- FIFO
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "Controls the action of the buffer when it
+        reaches the full status.  When in the lockWhenFull(1)
+        state and a packet is added to the buffer that
+        fills the buffer, the bufferControlFullStatus will
+        be set to full(2) and this buffer will stop capturing
+        packets."
+    ::= { bufferControlEntry 4 }
+
+bufferControlCaptureSliceSize OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of octets of each packet
+        that will be saved in this capture buffer.
+        For example, if a 1500 octet packet is received by
+        the probe and this object is set to 500, then only
+        500 octets of the packet will be stored in the
+        associated capture buffer.  If this variable is set
+        to 0, the capture buffer will save as many octets
+        as is possible.
+
+        This object may not be modified if the associated
+        bufferControlStatus object is equal to valid(1)."
+    DEFVAL { 100 }
+    ::= { bufferControlEntry 5 }
+
+bufferControlDownloadSliceSize OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of octets of each packet
+        in this capture buffer that will be returned in
+        an SNMP retrieval of that packet.  For example,
+        if 500 octets of a packet have been stored in the
+        associated capture buffer, the associated
+        bufferControlDownloadOffset is 0, and this
+        object is set to 100, then the captureBufferPacket
+        object that contains the packet will contain only
+        the first 100 octets of the packet.
+
+        A prudent manager will take into account possible
+        interoperability or fragmentation problems that may
+        occur if the download slice size is set too large.
+        In particular, conformant SNMP implementations are not
+        required to accept messages whose length exceeds 484
+        octets, although they are encouraged to support larger
+        datagrams whenever feasible."
+    DEFVAL { 100 }
+    ::= { bufferControlEntry 6 }
+
+bufferControlDownloadOffset OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The offset of the first octet of each packet
+        in this capture buffer that will be returned in
+        an SNMP retrieval of that packet.  For example,
+        if 500 octets of a packet have been stored in the
+        associated capture buffer and this object is set to
+        100, then the captureBufferPacket object that
+        contains the packet will contain bytes starting
+        100 octets into the packet."
+    DEFVAL { 0 }
+    ::= { bufferControlEntry 7 }
+
+bufferControlMaxOctetsRequested OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The requested maximum number of octets to be
+        saved in this captureBuffer, including any
+        implementation-specific overhead. If this variable
+        is set to -1, the capture buffer will save as many
+        octets as is possible.
+
+        When this object is created or modified, the probe
+        should set bufferControlMaxOctetsGranted as closely
+        to this object as is possible for the particular probe
+        implementation and available resources.  However, if
+        the object has the special value of -1, the probe
+        must set bufferControlMaxOctetsGranted to -1."
+    DEFVAL { -1 }
+    ::= { bufferControlEntry 8 }
+
+bufferControlMaxOctetsGranted OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of octets that can be
+        saved in this captureBuffer, including overhead.
+        If this variable is -1, the capture buffer will save
+        as many octets as possible.
+
+        When the bufferControlMaxOctetsRequested object is
+        created or modified, the probe should set this object
+        as closely to the requested value as is possible for the
+        particular probe implementation and available resources.
+        However, if the request object has the special value
+
+        of -1, the probe must set this object to -1.
+
+        The probe must not lower this value except as a result of
+        a modification to the associated
+        bufferControlMaxOctetsRequested object.
+
+        When this maximum number of octets is reached
+        and a new packet is to be added to this
+        capture buffer and the corresponding
+        bufferControlFullAction is set to wrapWhenFull(2),
+        enough of the oldest packets associated with this
+        capture buffer shall be deleted by the agent so
+        that the new packet can be added.  If the corresponding
+        bufferControlFullAction is set to lockWhenFull(1),
+        the new packet shall be discarded.  In either case,
+        the probe must set bufferControlFullStatus to
+        full(2).
+
+        When the value of this object changes to a value less
+        than the current value, entries are deleted from
+        the captureBufferTable associated with this
+        bufferControlEntry.  Enough of the
+        oldest of these captureBufferEntries shall be
+        deleted by the agent so that the number of octets
+        used remains less than or equal to the new value of
+        this object.
+
+        When the value of this object changes to a value greater
+        than the current value, the number of associated
+        captureBufferEntries may be allowed to grow."
+    ::= { bufferControlEntry 9 }
+
+bufferControlCapturedPackets OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Packets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets currently in this captureBuffer."
+    ::= { bufferControlEntry 10 }
+
+bufferControlTurnOnTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this capture buffer was
+        first turned on."
+    ::= { bufferControlEntry 11 }
+
+bufferControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it."
+    ::= { bufferControlEntry 12 }
+
+bufferControlStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this buffer Control Entry."
+    ::= { bufferControlEntry 13 }
+
+captureBufferTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF CaptureBufferEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of packets captured off of a channel."
+    ::= { capture 2 }
+
+captureBufferEntry OBJECT-TYPE
+    SYNTAX     CaptureBufferEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A packet captured off of an attached network.  As an
+        example, an instance of the captureBufferPacketData
+        object might be named captureBufferPacketData.3.1783"
+    INDEX { captureBufferControlIndex, captureBufferIndex }
+    ::= { captureBufferTable 1 }
+
+CaptureBufferEntry ::= SEQUENCE {
+    captureBufferControlIndex   Integer32,
+    captureBufferIndex          Integer32,
+    captureBufferPacketID       Integer32,
+    captureBufferPacketData     OCTET STRING,
+    captureBufferPacketLength   Integer32,
+    captureBufferPacketTime     Integer32,
+    captureBufferPacketStatus   Integer32
+}
+
+captureBufferControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the bufferControlEntry with which
+        this packet is associated."
+    ::= { captureBufferEntry 1 }
+
+captureBufferIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the captureBuffer table associated with a
+        particular bufferControlEntry.  This index will
+        start at 1 and increase by one for each new packet
+        added with the same captureBufferControlIndex.
+
+        Should this value reach 2147483647, the next packet
+        added with the same captureBufferControlIndex shall
+        cause this value to wrap around to 1."
+    ::= { captureBufferEntry 2 }
+
+captureBufferPacketID OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that describes the order of packets
+        that are received on a particular interface.
+        The packetID of a packet captured on an
+        interface is defined to be greater than the
+        packetID's of all packets captured previously on
+        the same interface.  As the captureBufferPacketID
+        object has a maximum positive value of 2^31 - 1,
+        any captureBufferPacketID object shall have the
+        value of the associated packet's packetID mod 2^31."
+    ::= { captureBufferEntry 3 }
+
+captureBufferPacketData OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The data inside the packet, starting at the beginning
+        of the packet plus any offset specified in the
+
+        associated bufferControlDownloadOffset, including any
+        link level headers.  The length of the data in this object
+        is the minimum of the length of the captured packet minus
+        the offset, the length of the associated
+        bufferControlCaptureSliceSize minus the offset, and the
+        associated bufferControlDownloadSliceSize.  If this minimum
+        is less than zero, this object shall have a length of zero."
+    ::= { captureBufferEntry 4 }
+
+captureBufferPacketLength OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The actual length (off the wire) of the packet stored
+        in this entry, including FCS octets."
+    ::= { captureBufferEntry 5 }
+
+captureBufferPacketTime OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "Milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of milliseconds that had passed since
+        this capture buffer was first turned on when this
+        packet was captured."
+    ::= { captureBufferEntry 6 }
+
+captureBufferPacketStatus OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A value which indicates the error status of this packet.
+
+        The value of this object is defined in the same way as
+        filterPktStatus.  The value is a sum.  This sum
+        initially takes the value zero.  Then, for each
+        error, E, that has been discovered in this packet,
+        2 raised to a value representing E is added to the sum.
+
+        The errors defined for a packet captured off of an
+        Ethernet interface are as follows:
+
+            bit #    Error
+                0    Packet is longer than 1518 octets
+
+                1    Packet is shorter than 64 octets
+                2    Packet experienced a CRC or Alignment error
+                3    First packet in this capture buffer after
+                     it was detected that some packets were
+                     not processed correctly.
+                4    Packet's order in buffer is only approximate
+                     (May only be set for packets sent from
+                     the probe)
+
+        For example, an Ethernet fragment would have a
+        value of 6 (2^1 + 2^2).
+
+        As this MIB is expanded to new media types, this object
+        will have other media-specific errors defined."
+    ::= { captureBufferEntry 7 }
+
+-- The Event Group
+
+-- Implementation of the Event group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Event group controls the generation and notification
+-- of events from this device.  Each entry in the eventTable
+-- describes the parameters of the event that can be triggered.
+-- Each event entry is fired by an associated condition located
+-- elsewhere in the MIB.  An event entry may also be associated
+-- with a function elsewhere in the MIB that will be executed
+-- when the event is generated.  For example, a channel may
+-- be turned on or off by the firing of an event.
+--
+-- Each eventEntry may optionally specify that a log entry
+-- be created on its behalf whenever the event occurs.
+-- Each entry may also specify that notification should
+-- occur by way of SNMP trap messages.  In this case, the
+-- community for the trap message is given in the associated
+-- eventCommunity object.  The enterprise and specific trap
+-- fields of the trap are determined by the condition that
+-- triggered the event.  Two traps are defined: risingAlarm and
+-- fallingAlarm.  If the eventTable is triggered by a condition
+-- specified elsewhere, the enterprise and specific trap fields
+-- must be specified for traps generated for that condition.
+
+eventTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF EventEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of events to be generated."
+    ::= { event 1 }
+
+eventEntry OBJECT-TYPE
+    SYNTAX     EventEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of parameters that describe an event to be generated
+        when certain conditions are met.  As an example, an instance
+        of the eventLastTimeSent object might be named
+        eventLastTimeSent.6"
+    INDEX { eventIndex }
+    ::= { eventTable 1 }
+
+EventEntry ::= SEQUENCE {
+    eventIndex          Integer32,
+    eventDescription    DisplayString,
+    eventType           INTEGER,
+    eventCommunity      OCTET STRING,
+    eventLastTimeSent   TimeTicks,
+    eventOwner          OwnerString,
+    eventStatus         EntryStatus
+}
+
+eventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        event table.  Each such entry defines one event that
+        is to be generated when the appropriate conditions
+        occur."
+    ::= { eventEntry 1 }
+
+eventDescription OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..127))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "A comment describing this event entry."
+    ::= { eventEntry 2 }
+
+eventType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 none(1),
+                 log(2),
+                 snmptrap(3),    -- send an SNMP trap
+                 logandtrap(4)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The type of notification that the probe will make
+        about this event.  In the case of log, an entry is
+        made in the log table for each event.  In the case of
+        snmp-trap, an SNMP trap is sent to one or more
+        management stations."
+    ::= { eventEntry 3 }
+
+eventCommunity OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0..127))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "If an SNMP trap is to be sent, it will be sent to
+        the SNMP community specified by this octet string."
+    ::= { eventEntry 4 }
+
+eventLastTimeSent OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime at the time this event
+        entry last generated an event.  If this entry has
+        not generated any events, this value will be
+        zero."
+    ::= { eventEntry 5 }
+
+eventOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is therefore
+        using the resources assigned to it.
+
+        If this object contains a string starting with 'monitor'
+        and has associated entries in the log table, all connected
+        management stations should retrieve those log entries,
+        as they may have significance to all management stations
+        connected to this device"
+    ::= { eventEntry 6 }
+
+eventStatus OBJECT-TYPE
+    SYNTAX     EntryStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this event entry.
+
+        If this object is not equal to valid(1), all associated
+        log entries shall be deleted by the agent."
+    ::= { eventEntry 7 }
+
+--
+logTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF LogEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A list of events that have been logged."
+    ::= { event 2 }
+
+logEntry OBJECT-TYPE
+    SYNTAX     LogEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of data describing an event that has been
+        logged.  For example, an instance of the logDescription
+        object might be named logDescription.6.47"
+    INDEX { logEventIndex, logIndex }
+    ::= { logTable 1 }
+
+LogEntry ::= SEQUENCE {
+    logEventIndex           Integer32,
+    logIndex                Integer32,
+    logTime                 TimeTicks,
+    logDescription          DisplayString
+}
+
+logEventIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The event entry that generated this log
+        entry.  The log identified by a particular
+        value of this index is associated with the same
+        eventEntry as identified by the same value
+        of eventIndex."
+    ::= { logEntry 1 }
+
+logIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the log table amongst those generated by the
+        same eventEntries.  These indexes are
+        assigned beginning with 1 and increase by one
+        with each new log entry.  The association
+        between values of logIndex and logEntries
+        is fixed for the lifetime of each logEntry.
+        The agent may choose to delete the oldest
+        instances of logEntry as required because of
+        lack of memory.  It is an implementation-specific
+        matter as to when this deletion may occur."
+    ::= { logEntry 2 }
+
+logTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this log entry was created."
+    ::= { logEntry 3 }
+
+logDescription OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An implementation dependent description of the
+        event that activated this log entry."
+    ::= { logEntry 4 }
+
+--  Remote Network Monitoring Traps
+
+rmonEventsV2 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION "Definition point for RMON notifications."
+    ::= { rmon 0 }
+
+risingAlarm NOTIFICATION-TYPE
+    OBJECTS  { alarmIndex, alarmVariable, alarmSampleType,
+               alarmValue, alarmRisingThreshold }
+    STATUS   current
+    DESCRIPTION
+        "The SNMP trap that is generated when an alarm
+        entry crosses its rising threshold and generates
+        an event that is configured for sending SNMP
+        traps."
+    ::= { rmonEventsV2 1 }
+
+fallingAlarm NOTIFICATION-TYPE
+    OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
+              alarmValue, alarmFallingThreshold }
+    STATUS    current
+    DESCRIPTION
+        "The SNMP trap that is generated when an alarm
+        entry crosses its falling threshold and generates
+        an event that is configured for sending SNMP
+        traps."
+    ::= { rmonEventsV2 2 }
+
+-- Conformance information
+
+rmonCompliances OBJECT IDENTIFIER ::= { rmonConformance 9 }
+rmonGroups      OBJECT IDENTIFIER ::= { rmonConformance 10 }
+
+-- Compliance Statements
+rmonCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The requirements for conformance to the RMON MIB. At least
+        one of the groups in this module must be implemented to
+        conform to the RMON MIB. Implementations of this MIB
+        must also implement the system group of MIB-II [16] and the
+        IF-MIB [17]."
+    MODULE -- this module
+
+      GROUP rmonEtherStatsGroup
+          DESCRIPTION
+              "The RMON Ethernet Statistics Group is optional."
+
+      GROUP rmonHistoryControlGroup
+          DESCRIPTION
+              "The RMON History Control Group is optional."
+
+      GROUP rmonEthernetHistoryGroup
+          DESCRIPTION
+              "The RMON Ethernet History Group is optional."
+
+      GROUP rmonAlarmGroup
+          DESCRIPTION
+              "The RMON Alarm Group is optional."
+
+      GROUP rmonHostGroup
+          DESCRIPTION
+              "The RMON Host Group is mandatory when the
+              rmonHostTopNGroup is implemented."
+
+      GROUP rmonHostTopNGroup
+          DESCRIPTION
+              "The RMON Host Top N Group is optional."
+
+      GROUP rmonMatrixGroup
+          DESCRIPTION
+              "The RMON Matrix Group is optional."
+
+      GROUP rmonFilterGroup
+          DESCRIPTION
+              "The RMON Filter Group is mandatory when the
+              rmonPacketCaptureGroup is implemented."
+
+      GROUP rmonPacketCaptureGroup
+          DESCRIPTION
+              "The RMON Packet Capture Group is optional."
+
+      GROUP rmonEventGroup
+          DESCRIPTION
+              "The RMON Event Group is mandatory when the
+              rmonAlarmGroup is implemented."
+    ::= { rmonCompliances 1 }
+
+    rmonEtherStatsGroup OBJECT-GROUP
+        OBJECTS {
+            etherStatsIndex, etherStatsDataSource,
+            etherStatsDropEvents, etherStatsOctets, etherStatsPkts,
+            etherStatsBroadcastPkts, etherStatsMulticastPkts,
+            etherStatsCRCAlignErrors, etherStatsUndersizePkts,
+            etherStatsOversizePkts, etherStatsFragments,
+            etherStatsJabbers, etherStatsCollisions,
+            etherStatsPkts64Octets, etherStatsPkts65to127Octets,
+            etherStatsPkts128to255Octets,
+            etherStatsPkts256to511Octets,
+            etherStatsPkts512to1023Octets,
+            etherStatsPkts1024to1518Octets,
+            etherStatsOwner, etherStatsStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Ethernet Statistics Group."
+        ::= { rmonGroups 1 }
+
+    rmonHistoryControlGroup OBJECT-GROUP
+        OBJECTS {
+            historyControlIndex, historyControlDataSource,
+            historyControlBucketsRequested,
+            historyControlBucketsGranted, historyControlInterval,
+            historyControlOwner, historyControlStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON History Control Group."
+        ::= { rmonGroups 2 }
+
+    rmonEthernetHistoryGroup OBJECT-GROUP
+        OBJECTS {
+            etherHistoryIndex, etherHistorySampleIndex,
+            etherHistoryIntervalStart, etherHistoryDropEvents,
+            etherHistoryOctets, etherHistoryPkts,
+            etherHistoryBroadcastPkts, etherHistoryMulticastPkts,
+            etherHistoryCRCAlignErrors, etherHistoryUndersizePkts,
+            etherHistoryOversizePkts, etherHistoryFragments,
+            etherHistoryJabbers, etherHistoryCollisions,
+            etherHistoryUtilization
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Ethernet History Group."
+        ::= { rmonGroups 3 }
+
+    rmonAlarmGroup OBJECT-GROUP
+        OBJECTS {
+            alarmIndex, alarmInterval, alarmVariable,
+            alarmSampleType, alarmValue, alarmStartupAlarm,
+            alarmRisingThreshold, alarmFallingThreshold,
+            alarmRisingEventIndex, alarmFallingEventIndex,
+            alarmOwner, alarmStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Alarm Group."
+        ::= { rmonGroups 4 }
+
+    rmonHostGroup OBJECT-GROUP
+        OBJECTS {
+            hostControlIndex, hostControlDataSource,
+            hostControlTableSize, hostControlLastDeleteTime,
+            hostControlOwner, hostControlStatus,
+            hostAddress, hostCreationOrder, hostIndex,
+            hostInPkts, hostOutPkts, hostInOctets,
+            hostOutOctets, hostOutErrors, hostOutBroadcastPkts,
+            hostOutMulticastPkts, hostTimeAddress,
+            hostTimeCreationOrder, hostTimeIndex,
+            hostTimeInPkts, hostTimeOutPkts, hostTimeInOctets,
+            hostTimeOutOctets, hostTimeOutErrors,
+            hostTimeOutBroadcastPkts, hostTimeOutMulticastPkts
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Host Group."
+        ::= { rmonGroups 5 }
+
+    rmonHostTopNGroup OBJECT-GROUP
+        OBJECTS {
+            hostTopNControlIndex, hostTopNHostIndex,
+            hostTopNRateBase, hostTopNTimeRemaining,
+            hostTopNDuration, hostTopNRequestedSize,
+            hostTopNGrantedSize, hostTopNStartTime,
+            hostTopNOwner, hostTopNStatus,
+            hostTopNReport, hostTopNIndex,
+            hostTopNAddress, hostTopNRate
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Host Top 'N' Group."
+        ::= { rmonGroups 6 }
+
+    rmonMatrixGroup OBJECT-GROUP
+        OBJECTS {
+            matrixControlIndex, matrixControlDataSource,
+            matrixControlTableSize, matrixControlLastDeleteTime,
+            matrixControlOwner, matrixControlStatus,
+            matrixSDSourceAddress, matrixSDDestAddress,
+            matrixSDIndex, matrixSDPkts,
+            matrixSDOctets, matrixSDErrors,
+            matrixDSSourceAddress, matrixDSDestAddress,
+            matrixDSIndex, matrixDSPkts,
+            matrixDSOctets, matrixDSErrors
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Matrix Group."
+        ::= { rmonGroups 7 }
+
+    rmonFilterGroup OBJECT-GROUP
+        OBJECTS {
+
+            filterIndex, filterChannelIndex, filterPktDataOffset,
+            filterPktData, filterPktDataMask,
+            filterPktDataNotMask, filterPktStatus,
+            filterPktStatusMask, filterPktStatusNotMask,
+            filterOwner, filterStatus,
+            channelIndex, channelIfIndex, channelAcceptType,
+            channelDataControl, channelTurnOnEventIndex,
+            channelTurnOffEventIndex, channelEventIndex,
+            channelEventStatus, channelMatches,
+            channelDescription, channelOwner, channelStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Filter Group."
+        ::= { rmonGroups 8 }
+
+    rmonPacketCaptureGroup OBJECT-GROUP
+        OBJECTS {
+            bufferControlIndex, bufferControlChannelIndex,
+            bufferControlFullStatus, bufferControlFullAction,
+            bufferControlCaptureSliceSize,
+            bufferControlDownloadSliceSize,
+            bufferControlDownloadOffset,
+            bufferControlMaxOctetsRequested,
+            bufferControlMaxOctetsGranted,
+            bufferControlCapturedPackets,
+            bufferControlTurnOnTime,
+            bufferControlOwner, bufferControlStatus,
+            captureBufferControlIndex, captureBufferIndex,
+            captureBufferPacketID, captureBufferPacketData,
+            captureBufferPacketLength, captureBufferPacketTime,
+            captureBufferPacketStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Packet Capture Group."
+        ::= { rmonGroups 9 }
+
+    rmonEventGroup OBJECT-GROUP
+        OBJECTS {
+            eventIndex, eventDescription, eventType,
+            eventCommunity, eventLastTimeSent,
+            eventOwner, eventStatus,
+            logEventIndex, logIndex, logTime,
+            logDescription
+        }
+        STATUS current
+        DESCRIPTION
+            "The RMON Event Group."
+        ::= { rmonGroups 10 }
+
+    rmonNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS { risingAlarm, fallingAlarm }
+        STATUS        current
+        DESCRIPTION
+            "The RMON Notification Group."
+        ::= { rmonGroups 11 }
+END
diff --git a/snmp_builder/mibs/RMON2-MIB.mib b/snmp_builder/mibs/RMON2-MIB.mib
new file mode 100644
index 0000000..a8cd08c
--- /dev/null
+++ b/snmp_builder/mibs/RMON2-MIB.mib
@@ -0,0 +1,5711 @@
+RMON2-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
+    Gauge32, IpAddress, TimeTicks, mib-2         FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, DisplayString, TimeStamp
+                                                 FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP              FROM SNMPv2-CONF
+    ifIndex                                      FROM IF-MIB
+    OwnerString, statistics, history, hosts,
+    matrix, filter, etherStatsEntry, historyControlEntry,
+    hostControlEntry, matrixControlEntry, filterEntry,
+    channelEntry                    FROM RMON-MIB
+    tokenRing, tokenRingMLStatsEntry, tokenRingPStatsEntry,
+    ringStationControlEntry, sourceRoutingStatsEntry
+                                    FROM TOKEN-RING-RMON-MIB;
+--  Remote Network Monitoring MIB
+
+rmon MODULE-IDENTITY
+    LAST-UPDATED "200605020000Z"    -- May 2, 2006
+    ORGANIZATION "IETF RMON MIB Working Group"
+    CONTACT-INFO
+        "Author:
+                     Steve Waldbusser
+             Phone:  +1-650-948-6500
+             Fax :   +1-650-745-0671
+             Email:  waldbusser@nextbeacon.com
+
+         Working Group Chair:
+                     Andy Bierman
+             E-mail: ietf@andybierman.com
+
+         Working Group Mailing List: <rmonmib@ietf.org>
+         To subscribe send email to: <rmonmib-request@ietf.org>    "
+    DESCRIPTION
+        "The MIB module for managing remote monitoring
+         device implementations.  This MIB module
+         extends the architecture introduced in the original
+         RMON MIB as specified in RFC 2819.
+
+         Copyright (C) The Internet Society (2006).  This version of
+         this MIB module is part of RFC 4502;  see the RFC itself for
+         full legal notices."
+
+    REVISION "200605020000Z"    -- May 2, 2006
+    DESCRIPTION
+        "This version updates the proposed-standard version of the
+        RMON2 MIB (published as RFC 2021) by adding 2 new
+        enumerations to the nlMatrixTopNControlRateBase object and
+        4 new enumerations to the alMatrixTopNControlRateBase object.
+        These new enumerations support the creation of high-capacity
+        topN reports in the High Capacity RMON MIB [RFC3273].
+
+        Additionally, the following objects have been deprecated, as
+        they have not had enough independent implementations to
+        demonstrate interoperability to meet the requirements of a
+        Draft Standard:
+
+        probeDownloadFile
+        probeDownloadTFTPServer
+        probeDownloadAction
+        probeDownloadStatus
+
+        serialMode
+        serialProtocol
+        serialTimeout
+        serialModemInitString
+        serialModemHangUpString
+        serialModemConnectResp
+        serialModemNoConnectResp
+        serialDialoutTimeout
+        serialStatus
+        serialConnectDestIpAddress
+        serialConnectType
+        serialConnectDialString
+        serialConnectSwitchConnectSeq
+        serialConnectSwitchDisconnectSeq
+        serialConnectSwitchResetSeq
+        serialConnectOwner
+        serialConnectStatus
+        netConfigIPAddress
+        netConfigSubnetMask
+        netConfigStatus
+        netDefaultGateway
+        tokenRingMLStats2DroppedFrames
+        tokenRingMLStats2CreateTime
+        tokenRingPStats2DroppedFrames
+        tokenRingPStats2CreateTime
+        ringStationControl2DroppedFrames
+        ringStationControl2CreateTime
+        sourceRoutingStats2DroppedFrames
+        sourceRoutingStats2CreateTime
+        trapDestIndex
+        trapDestCommunity
+        trapDestProtocol
+        trapDestAddress
+        trapDestOwner
+        trapDestStatus
+
+        In addition, two corrections were made.  The LastCreateTime
+        Textual Convention had been defined with a base type of
+        another textual convention, which isn't allowed in SMIv2.  The
+        definition has been modified to use TimeTicks as the base
+        type.
+
+        Further, the SerialConfigEntry SEQUENCE definition included
+        sub-typing information that is not allowed in SMIv2.  This
+        information has been deleted.  Ranges were added to a number of
+        objects and textual-conventions to constrain their maximum
+        (and sometimes minimum) sizes.  The addition of these ranges
+        documents existing practice for these objects.  These objects
+
+        are:
+            ControlString
+            protocolDirID
+            protocolDirParameters
+            addressMapNetworkAddress
+            nlHostAddress
+            nlMatrixSDSourceAddress
+            nlMatrixSDDestAddress
+            nlMatrixDSSourceAddress
+            nlMatrixDSDestAddress
+            nlMatrixTopNSourceAddress
+            nlMatrixTopNDestAddress
+            alHostEntry
+            alMatrixSDEntry
+            alMatrixDSEntry
+            alMatrixTopNSourceAddress
+            alMatrixTopNDestAddress
+
+        Finally, the TimeFilter TC has been updated to encourage agent
+        implementations that allow a MIB walk to behave well even when
+        performed by an application that is not aware of the special
+        TimeFilter semantics."
+
+    REVISION "200207080000Z"        -- 08 July, 2002
+    DESCRIPTION
+        "Added new enumerations to support the High-Capacity RMON
+        MIB as defined in RFC 3273.  Also fixed some typos and
+        added clarifications."
+
+    REVISION "199605270000Z"    -- 27 May, 1996
+    DESCRIPTION
+        "Original version.  Published as RFC 2021."
+    ::= { mib-2 16 }
+
+-- { rmon 1 } through { rmon 10 } are defined in RMON and
+-- the Token Ring RMON MIB [RFC1513]
+
+    protocolDir     OBJECT IDENTIFIER ::= { rmon 11 }
+    protocolDist    OBJECT IDENTIFIER ::= { rmon 12 }
+    addressMap      OBJECT IDENTIFIER ::= { rmon 13 }
+    nlHost          OBJECT IDENTIFIER ::= { rmon 14 }
+    nlMatrix        OBJECT IDENTIFIER ::= { rmon 15 }
+    alHost          OBJECT IDENTIFIER ::= { rmon 16 }
+    alMatrix        OBJECT IDENTIFIER ::= { rmon 17 }
+    usrHistory      OBJECT IDENTIFIER ::= { rmon 18 }
+    probeConfig     OBJECT IDENTIFIER ::= { rmon 19 }
+    rmonConformance OBJECT IDENTIFIER ::= { rmon 20 }
+
+-- Textual Conventions
+
+ZeroBasedCounter32 ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This TC describes an object that counts events with the
+        following semantics: objects of this type will be set to
+        zero(0) on creation and will thereafter count appropriate
+        events, wrapping back to zero(0) when the value 2^32 is
+        reached.
+
+        Provided that an application discovers the new object within
+        the minimum time to wrap, it can use the initial value as a
+        delta since it last polled the table of which this object is
+        part.  It is important for a management station to be aware of
+        this minimum time and the actual time between polls, and to
+        discard data if the actual time is too long or there is no
+        defined minimum time.
+
+        Typically, this TC is used in tables where the INDEX space is
+        constantly changing and/or the TimeFilter mechanism is in use."
+    SYNTAX Gauge32
+
+LastCreateTime ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This TC describes an object that stores the value of the
+        sysUpTime object at the last time its entry was created.
+
+        This can be used for polling applications to determine that an
+        entry has been deleted and re-created between polls, causing
+        an otherwise undetectable discontinuity in the data.
+
+        If sysUpTime is reset to zero as a result of a re-
+        initialization of the network management (sub)system, then
+        the values of all LastCreateTime objects are also reset.
+        However, after approximately 497 days without a re-
+        initialization, the sysUpTime object will reach 2^^32-1 and
+        then increment to zero; in this case, existing values
+        of TimeStamp objects do not change.  This can lead to
+        ambiguities in the value of TimeStamp objects."
+    SYNTAX TimeTicks
+
+TimeFilter ::= TEXTUAL-CONVENTION
+  STATUS        current
+  DESCRIPTION
+      "To be used for the index to a table.  Allows an application
+      to download only those rows changed since a particular time.
+
+      Note that this is not a history mechanism.  Only current values
+      of underlying objects are returned; saved instance values
+      associated with particular values of sysUpTime are not.
+
+      An entry is considered changed if the value of any object in the
+      entry changes, if the row is created, or if any object in the
+      entry is created or deleted.  Note that deleted entries cannot
+      be detected or downloaded.
+
+      A time-filtered conceptual table is created by inserting a
+      single object of SYNTAX TimeFilter as the first INDEX component
+      in a copy of an existing basic conceptual table (i.e., any
+      SEQUENCE without a TimeFilter INDEX component).  Thus, for
+      each conceptual entry 'I' in the basic table, there exists N
+      conceptual entries in the time-filtered version, indexed N.I,
+      where 'N' is equal to the value of sysUpTime.
+
+      When an application retrieves conceptual instances from a
+      time-filtered table, and an INDEX value is provided for the
+      TimeFilter INDEX component 'N', the agent will only consider
+      returning basic conceptual entries (e.g., 'fooColumn.N.I') if
+      any column within the basic conceptual entry has changed since
+      sysUpTime 'N'.  If not, the basic conceptual entry will
+      be ignored for the particular retrieval operation.
+
+      When sysUpTime is equal to zero, this table shall be empty.
+
+      One conceptual entry exists for each past value of sysUpTime,
+      except that the whole table is purged should sysUpTime wrap.
+
+      As an entry in a time-filtered table is updated (i.e., one of
+      the columns in the basic conceptual table is changed), new
+      conceptual entries are also created in the time-filtered version
+      (which still shares the now updated object values with all other
+      instances).  The number of unique time-filtered instances that
+      are created is determined by the value of sysUpTime at which the
+      basic entry was last updated.  One unique instance will exist
+      for each value of sysUpTime at the last update time for the row.
+      However, a new TimeFilter index instance is created for each new
+      sysUpTime value.  The TimeFilter index values not associated
+      with entry updates are called duplicate time-filtered instances.
+
+      After some deployment experience, it has been determined that
+      a time-filtered table is more efficient if the agent
+      stops a MIB walk operation by skipping over rows with a
+      TimeFilter index value higher than the value in the received
+      GetNext/GetBulk request.  That is, instead of incrementing a
+      TimeFilter index value, the agent will continue to the next
+
+      object or table.  As a consequence, GetNext or GetBulk
+      operations will provide only one pass through a time-filtered
+      table.
+
+      It is suggested that an agent implement a time-filtered table
+      in this manner to improve performance and avoid a MIB walk
+      getting stuck in time-filtered tables.  It is, however, still
+      acceptable for an agent to implement a time-filtered table in
+      the traditional manner (i.e., every conceptual time-filtered
+      instance is returned in GetNext and GetBulk PDU responses), and
+      management applications must be able to deal with such
+      traditional implementations.
+
+      See the appendix for further discussion of this textual
+      convention.
+
+      The following example is provided to demonstrate TimeFilter
+      behavior:
+
+      Consider the following basic conceptual table, basicFooTable.
+      (Note that the basic version of a time-filtered table may not
+      actually be defined.)
+
+          basicFooTable:
+
+          basicFooTable ...
+          INDEX { fooIndex }
+
+          BasicFooEntry {
+             fooIndex     Integer32,
+             fooCounts    Counter32
+          }
+
+      For this example, the basicFooTable contains two static
+      conceptual entries (fooIndex equals '1' and '2'), created at
+      time zero.  It also contains one dynamic conceptual entry
+      (fooIndex equals '3'), which is created at time '3' and deleted
+      at time '7'.
+
+      The time-filtered version of the basicFooTable could be defined
+      as follows:
+
+          FooTable:
+
+          fooTable ...
+          INDEX { fooTimeMark, fooIndex }
+
+          FooEntry {
+
+             fooTimeMark  TimeFilter,
+             fooIndex     Integer32,
+             fooCounts    Counter32
+          }
+
+      Note that entries exist in the time-filtered conceptual table
+      only if they actually exist in the underlying (basic) table.
+
+      For this example, the fooTable will have three underlying
+      basic entries (fooIndex == 1, 2, and 3), with the following
+      activity (for sysUpTime equal 0 to 9):
+
+         - fooEntry.N.1 is created at time '0' and most recently
+           updated at time '6' to the value '5'.
+         - fooEntry.N.2 is created at time '0' and most recently
+           updated at time '8' to the value '9'.
+         - fooEntry.N.3 is created at time '3', updated at time '5'
+           to the value '17', and deleted at time '7'.
+
+     The following tables show the values that would be returned for
+     MIB walk operations with various TimeFilter values, done at
+     different times.  An application issues a retrieval request at
+     time 'T', with a TimeFilter value, 'N' (typically set to a lower
+     value, such as the value of sysUpTime at the last polling cycle).
+
+     The following values would be returned in a MIB walk of
+     fooCounts.N if T equals '0' and N equals '0':
+
+           fooCounts.N.I    Value
+           ==========================
+           fooCounts.0.1    0
+           fooCounts.0.2    0
+
+       Note that nothing is returned for fooCounts.0.3, since that
+       entry does not exist at sysUpTime equals '0'.
+
+     The following values would be returned in a full (traditional) MIB
+     walk of fooCounts.N if T equals '3' and N equals '0':
+
+           fooCounts.N.I    Value
+           =======================
+           fooCounts.0.1    0
+           fooCounts.0.2    0
+           fooCounts.0.3    0
+           fooCounts.1.3    0
+           fooCounts.2.3    0
+           fooCounts.3.3    0
+
+       Note that there are no instances for T equals 1 or 2 for the
+       first two values of N, as these entries did not change
+       since they were created at time '0'.
+
+       Note that the current value for 'fooCounts.N.3' is returned
+       here, even for values of N less than '3' (when the entry was
+       created).  The agent only considers the current existence of an
+       entry in the TimeFilter algorithm, not the time when the entry
+       was created.
+
+       Note that the instances 'fooCounts.0.3', 'fooCounts.1.3',
+       and 'fooCounts.2.3' are duplicates and can be suppressed by the
+       agent in a MIB walk.
+
+     The following values would be returned in a full (traditional)
+     MIB walk of fooCounts.N if T equals '6' and N equals '3':
+
+           fooCounts.N.I    Value
+           =======================
+           fooCounts.3.1    5
+           fooCounts.3.3    17
+           fooCounts.4.1    5
+           fooCounts.4.3    17
+           fooCounts.5.1    5
+           fooCounts.5.3    17
+           fooCounts.6.1    5
+
+        Note that no instances for entry 'fooCounts.N.2' are returned,
+        since it has not changed since time '3'.
+
+        Note that all instances except 'fooCounts.5.3' and
+        'fooCounts.6.1' are duplicates and can be suppressed by the
+        agent in a MIB walk.
+
+     The following values would be returned in a full (traditional)
+     MIB walk of fooCounts.N if T equals '9' and N equals '6':
+
+           fooCounts.N.I    Value
+           =======================
+           fooCounts.6.1    5
+           fooCounts.6.2    9
+           fooCounts.7.2    9
+           fooCounts.8.2    9
+
+        Note that no instances for entry 'fooCounts.N.3' are returned,
+        since it was deleted at time '7'.
+
+        Note that instances 'fooCounts.6.2' and 'fooCounts.7.2'
+
+        are duplicates and can be suppressed by the agent in a MIB
+        walk."
+  SYNTAX    TimeTicks
+
+DataSource ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+        "Identifies the source of the data that the associated
+        function is configured to analyze.  This source can be any
+        interface on this device.
+
+        In order to identify a particular interface, this
+        object shall identify the instance of the ifIndex
+        object, defined in [RFC2863], for the desired interface.
+
+        For example, if an entry were to receive data from
+        interface #1, this object would be set to ifIndex.1."
+    SYNTAX      OBJECT IDENTIFIER
+
+--
+-- Protocol Directory Group
+--
+-- Lists the inventory of protocols the probe has the capability of
+-- monitoring and allows the addition, deletion, and configuration of
+-- entries in this list.
+
+protocolDirLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time the protocol directory
+        was last modified, either through insertions or deletions,
+        or through modifications of the
+        protocolDirAddressMapConfig, protocolDirHostConfig, or
+        protocolDirMatrixConfig."
+    ::= { protocolDir 1 }
+
+protocolDirTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ProtocolDirEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists the protocols that this agent has the
+        capability to decode and count.  There is one entry in this
+        table for each such protocol.  These protocols represent
+        different network-layer, transport-layer, and higher-layer
+
+        protocols.  The agent should boot up with this table
+        preconfigured with those protocols that it knows about and
+        wishes to monitor.  Implementations are strongly encouraged to
+        support protocols higher than the network layer (at least for
+        the protocol distribution group), even for implementations
+        that don't support the application-layer groups."
+    ::= { protocolDir 2 }
+
+protocolDirEntry OBJECT-TYPE
+    SYNTAX      ProtocolDirEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the protocolDirTable.
+
+         An example of the indexing of this entry is
+         protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the
+         encoding of a length of 8, followed by 8 subids encoding the
+         protocolDirID of 1.2048, followed by a length of 2 and the
+         2 subids encoding zero-valued parameters.
+
+         Note that some combinations of index values may result in an
+         index that exceeds 128 sub-identifiers in length, which exceeds
+         the maximum for the SNMP protocol.  Implementations should take
+         care to avoid such combinations."
+    INDEX { protocolDirID, protocolDirParameters }
+    ::= { protocolDirTable  1 }
+
+ProtocolDirEntry ::= SEQUENCE {
+    protocolDirID                   OCTET STRING,
+    protocolDirParameters           OCTET STRING,
+    protocolDirLocalIndex           Integer32,
+    protocolDirDescr                DisplayString,
+    protocolDirType                 BITS,
+    protocolDirAddressMapConfig     INTEGER,
+    protocolDirHostConfig           INTEGER,
+    protocolDirMatrixConfig         INTEGER,
+    protocolDirOwner                OwnerString,
+    protocolDirStatus               RowStatus
+}
+
+protocolDirID OBJECT-TYPE
+    SYNTAX      OCTET STRING  (SIZE (4..128))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique identifier for a particular protocol.  Standard
+        identifiers will be defined in such a manner that they
+
+        can often be used as specifications for new protocols - i.e.,
+        a tree-structured assignment mechanism that matches the
+        protocol encapsulation 'tree' and that has algorithmic
+        assignment mechanisms for certain subtrees.  See RFC 2074 for
+        more details.
+
+        Despite the algorithmic mechanism, the probe will only place
+        entries in here for those protocols it chooses to collect.  In
+        other words, it need not populate this table with all
+        possible ethernet protocol types, nor need it create them on
+        the fly when it sees them.  Whether it does these
+        things is a matter of product definition (cost/benefit,
+        usability) and is up to the designer of the product.
+
+        If an entry is written to this table with a protocolDirID that
+        the agent doesn't understand, either directly or
+        algorithmically, the SET request will be rejected with an
+        inconsistentName or badValue (for SNMPv1) error."
+    ::= { protocolDirEntry 1 }
+
+protocolDirParameters OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of parameters for the associated protocolDirID.
+        See the associated RMON2 Protocol Identifiers document
+        for a description of the possible parameters.  There
+        will be one octet in this string for each sub-identifier in
+        the protocolDirID, and the parameters will appear here in the
+        same order as the associated sub-identifiers appear in the
+        protocolDirID.
+
+        Every node in the protocolDirID tree has a different, optional
+        set of parameters defined (that is, the definition of
+        parameters for a node is optional).  The proper parameter
+        value for each node is included in this string.  Note that the
+        inclusion of a parameter value in this string for each node is
+        not optional.  What is optional is that a node may have no
+        parameters defined, in which case the parameter field for that
+        node will be zero."
+    ::= { protocolDirEntry 2 }
+
+protocolDirLocalIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary but unique identifier associated
+        with this protocolDir entry.
+
+        The value for each supported protocol must remain constant at
+        least from one re-initialization of the entity's network
+        management system to the next re-initialization, except that
+        if a protocol is deleted and re-created, it must be re-created
+        with a new value that has not been used since the last
+        re-initialization.
+
+        The specific value is meaningful only within a given SNMP
+        entity.  A protocolDirLocalIndex must not be re-used until the
+        next agent restart in the event that the protocol directory
+        entry is deleted."
+    ::= { protocolDirEntry 3 }
+
+protocolDirDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..64))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A textual description of the protocol encapsulation.
+        A probe may choose to describe only a subset of the
+        entire encapsulation (e.g., only the highest layer).
+
+        This object is intended for human consumption only.
+
+        This object may not be modified if the associated
+        protocolDirStatus object is equal to active(1)."
+    ::= { protocolDirEntry 4 }
+
+protocolDirType OBJECT-TYPE
+    SYNTAX      BITS {
+                    extensible(0),
+                    addressRecognitionCapable(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object describes 2 attributes of this protocol
+         directory entry.
+
+         The presence or absence of the 'extensible' bit describes
+         whether this protocol directory entry can be extended
+         by the user by creating protocol directory entries that are
+         children of this protocol.
+
+         An example of an entry that will often allow extensibility is
+
+         'ip.udp'.  The probe may automatically populate some children
+         of this node, such as 'ip.udp.snmp' and 'ip.udp.dns'.
+         A probe administrator or user may also populate additional
+         children via remote SNMP requests that create entries in this
+         table.  When a child node is added for a protocol for which the
+         probe has no built-in support extending a parent node (for
+         which the probe does have built-in support),
+         that child node is not extendable.  This is termed 'limited
+         extensibility'.
+
+         When a child node is added through this extensibility
+         mechanism, the values of protocolDirLocalIndex and
+         protocolDirType shall be assigned by the agent.
+
+         The other objects in the entry will be assigned by the
+         manager who is creating the new entry.
+
+         This object also describes whether this agent can
+         recognize addresses for this protocol, should it be a
+         network-level protocol.  That is, while a probe may be able
+         to recognize packets of a particular network-layer protocol
+         and count them, it takes additional logic to be able to
+         recognize the addresses in this protocol and to populate
+         network-layer or application-layer tables with the addresses
+         in this protocol.  If this bit is set, the agent will
+         recognize network-layer addresses for this protocol and
+         populate the network- and application-layer host and matrix
+         tables with these protocols.
+
+         Note that when an entry is created, the agent will supply
+         values for the bits that match the capabilities of the agent
+         with respect to this protocol.  Note that since row creations
+         usually exercise the limited extensibility feature, these
+         bits will usually be set to zero."
+    ::= { protocolDirEntry 5 }
+
+protocolDirAddressMapConfig OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(1),
+                    supportedOff(2),
+                    supportedOn(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object describes and configures the probe's support for
+        address mapping for this protocol.  When the probe creates
+        entries in this table for all protocols that it understands,
+        it will set the entry to notSupported(1) if it doesn't have
+        the capability to perform address mapping for the protocol or
+        if this protocol is not a network-layer protocol.  When
+        an entry is created in this table by a management operation as
+        part of the limited extensibility feature, the probe must set
+        this value to notSupported(1), because limited extensibility
+        of the protocolDirTable does not extend to interpreting
+        addresses of the extended protocols.
+
+        If the value of this object is notSupported(1), the probe
+        will not perform address mapping for this protocol and
+        shall not allow this object to be changed to any other value.
+        If the value of this object is supportedOn(3), the probe
+        supports address mapping for this protocol and is configured
+        to perform address mapping for this protocol for all
+        addressMappingControlEntries and all interfaces.
+        If the value of this object is supportedOff(2), the probe
+        supports address mapping for this protocol but is configured
+        to not perform address mapping for this protocol for any
+        addressMappingControlEntries and all interfaces.
+        Whenever this value changes from supportedOn(3) to
+        supportedOff(2), the probe shall delete all related entries in
+        the addressMappingTable."
+    ::= { protocolDirEntry 6 }
+
+protocolDirHostConfig OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(1),
+                    supportedOff(2),
+                    supportedOn(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object describes and configures the probe's support for
+        the network-layer and application-layer host tables for this
+        protocol.  When the probe creates entries in this table for
+        all protocols that it understands, it will set the entry to
+        notSupported(1) if it doesn't have the capability to track the
+        nlHostTable for this protocol or if the alHostTable is
+        implemented but doesn't have the capability to track this
+        protocol.  Note that if the alHostTable is implemented, the
+        probe may only support a protocol if it is supported in both
+        the nlHostTable and the alHostTable.
+
+        If the associated protocolDirType object has the
+        addressRecognitionCapable bit set, then this is a network-
+        layer protocol for which the probe recognizes addresses, and
+
+        thus the probe will populate the nlHostTable and alHostTable
+        with addresses it discovers for this protocol.
+
+        If the value of this object is notSupported(1), the probe
+        will not track the nlHostTable or alHostTable for this
+        protocol and shall not allow this object to be changed to any
+        other value.  If the value of this object is supportedOn(3),
+        the probe supports tracking of the nlHostTable and alHostTable
+        for this protocol and is configured to track both tables
+        for this protocol for all control entries and all interfaces.
+        If the value of this object is supportedOff(2), the probe
+        supports tracking of the nlHostTable and alHostTable for this
+        protocol but is configured to not track these tables
+        for any control entries or interfaces.
+        Whenever this value changes from supportedOn(3) to
+        supportedOff(2), the probe shall delete all related entries in
+        the nlHostTable and alHostTable.
+
+        Note that since each alHostEntry references 2 protocol
+        directory entries, one for the network address and one for the
+        type of the highest protocol recognized, an entry will
+        only be created in that table if this value is supportedOn(3)
+        for both protocols."
+    ::= { protocolDirEntry 7 }
+
+protocolDirMatrixConfig OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(1),
+                    supportedOff(2),
+                    supportedOn(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object describes and configures the probe's support for
+        the network-layer and application-layer matrix tables for this
+        protocol.  When the probe creates entries in this table for
+        all protocols that it understands, it will set the entry to
+        notSupported(1) if it doesn't have the capability to track the
+        nlMatrixTables for this protocol or if the alMatrixTables are
+        implemented but don't have the capability to track this
+        protocol.  Note that if the alMatrix tables are implemented,
+        the probe may only support a protocol if it is supported in
+        both of the nlMatrixTables and both of the
+        alMatrixTables.
+
+        If the associated protocolDirType object has the
+        addressRecognitionCapable bit set, then this is a network-
+
+        layer protocol for which the probe recognizes addresses, and
+        thus the probe will populate both of the nlMatrixTables and
+        both of the alMatrixTables with addresses it discovers for
+        this protocol.
+
+        If the value of this object is notSupported(1), the probe
+        will not track either of the nlMatrixTables or the
+        alMatrixTables for this protocol and shall not allow this
+        object to be changed to any other value.  If the value of this
+        object is supportedOn(3), the probe supports tracking of both
+        of the nlMatrixTables and (if implemented) both of the
+        alMatrixTables for this protocol and is configured to track
+        these tables for this protocol for all control entries and all
+        interfaces.  If the value of this object is supportedOff(2),
+        the probe supports tracking of both of the nlMatrixTables and
+        (if implemented) both of the alMatrixTables for this protocol
+        but is configured to not track these tables for this
+        protocol for any control entries or interfaces.
+        Whenever this value changes from supportedOn(3) to
+        supportedOff(2), the probe shall delete all related entries in
+        the nlMatrixTables and the alMatrixTables.
+
+        Note that since each alMatrixEntry references 2 protocol
+        directory entries, one for the network address and one for the
+        type of the highest protocol recognized, an entry will
+        only be created in that table if this value is supportedOn(3)
+        for both protocols."
+    ::= { protocolDirEntry 8 }
+
+protocolDirOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { protocolDirEntry 9 }
+
+protocolDirStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this protocol directory entry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the nlHostTable, nlMatrixSDTable, nlMatrixDSTable,
+        alHostTable, alMatrixSDTable, and alMatrixDSTable shall be
+        deleted."
+    ::= { protocolDirEntry 10 }
+
+--
+-- Protocol Distribution Group  (protocolDist)
+--
+-- Collects the relative amounts of octets and packets for the
+-- different protocols detected on a network segment.
+--    protocolDistControlTable,
+--    protocolDistStatsTable
+
+protocolDistControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ProtocolDistControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Controls the setup of protocol type distribution statistics
+        tables.
+
+        Implementations are encouraged to add an entry per monitored
+        interface upon initialization so that a default collection
+        of protocol statistics is available.
+
+        Rationale:
+        This table controls collection of very basic statistics
+        for any or all of the protocols detected on a given interface.
+        An NMS can use this table to quickly determine bandwidth
+        allocation utilized by different protocols.
+
+        A media-specific statistics collection could also
+        be configured (e.g., etherStats, trPStats) to easily obtain
+        total frame, octet, and droppedEvents for the same
+        interface."
+    ::= { protocolDist 1 }
+
+protocolDistControlEntry OBJECT-TYPE
+    SYNTAX      ProtocolDistControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the protocolDistControlTable.
+
+         An example of the indexing of this entry is
+         protocolDistControlDroppedFrames.7"
+    INDEX { protocolDistControlIndex }
+    ::= { protocolDistControlTable 1 }
+
+ProtocolDistControlEntry ::= SEQUENCE {
+    protocolDistControlIndex                Integer32,
+    protocolDistControlDataSource           DataSource,
+    protocolDistControlDroppedFrames        Counter32,
+    protocolDistControlCreateTime           LastCreateTime,
+    protocolDistControlOwner                OwnerString,
+    protocolDistControlStatus               RowStatus
+}
+
+protocolDistControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique index for this protocolDistControlEntry."
+    ::= { protocolDistControlEntry 1 }
+
+protocolDistControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of data for the this protocol distribution.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the
+        identified interface.
+
+        This object may not be modified if the associated
+        protocolDistControlStatus object is equal to active(1)."
+    ::= { protocolDistControlEntry 2 }
+
+protocolDistControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the probe
+        is out of some resources and decides to shed load from this
+        collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { protocolDistControlEntry 3 }
+
+protocolDistControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { protocolDistControlEntry 4 }
+
+protocolDistControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { protocolDistControlEntry 5 }
+
+protocolDistControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this row.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the protocolDistStatsTable shall be deleted."
+    ::= { protocolDistControlEntry 6 }
+
+-- per interface protocol distribution statistics table
+protocolDistStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ProtocolDistStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry is made in this table for every protocol in the
+        protocolDirTable that has been seen in at least one packet.
+        Counters are updated in this table for every protocol type
+        that is encountered when parsing a packet, but no counters are
+
+        updated for packets with MAC-layer errors.
+
+        Note that if a protocolDirEntry is deleted, all associated
+        entries in this table are removed."
+    ::= { protocolDist 2 }
+
+protocolDistStatsEntry OBJECT-TYPE
+    SYNTAX      ProtocolDistStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the protocolDistStatsTable.
+
+        The index is composed of the protocolDistControlIndex of the
+        associated protocolDistControlEntry, followed by the
+        protocolDirLocalIndex of the associated protocol that this
+        entry represents.  In other words, the index identifies the
+        protocol distribution an entry is a part of and the
+        particular protocol that it represents.
+
+        An example of the indexing of this entry is
+        protocolDistStatsPkts.1.18"
+    INDEX { protocolDistControlIndex, protocolDirLocalIndex }
+    ::= { protocolDistStatsTable 1 }
+
+ProtocolDistStatsEntry ::= SEQUENCE {
+    protocolDistStatsPkts                    ZeroBasedCounter32,
+    protocolDistStatsOctets                  ZeroBasedCounter32
+}
+
+protocolDistStatsPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets of this protocol type received
+        without errors.  Note that this is the number of
+        link-layer packets, so if a single network-layer packet
+        is fragmented into several link-layer frames, this counter
+        is incremented several times."
+    ::= { protocolDistStatsEntry 1 }
+
+protocolDistStatsOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets in packets of this protocol type
+
+        received since it was added to the protocolDistStatsTable
+        (excluding framing bits, but including FCS octets), except for
+        those octets in packets that contained errors.
+
+        Note that this doesn't count just those octets in the
+        particular protocol frames but includes the entire packet
+        that contained the protocol."
+    ::= { protocolDistStatsEntry 2 }
+
+--
+-- Address Map Group   (addressMap)
+--
+-- Lists MAC address to network address bindings discovered by the
+-- probe and what interface they were last seen on.
+--    addressMapControlTable
+--    addressMapTable
+
+addressMapInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an address mapping entry has been
+        inserted into the addressMapTable.  If an entry is inserted,
+        then deleted, and then inserted, this counter will be
+        incremented by 2.
+
+        Note that the table size can be determined by subtracting
+        addressMapDeletes from addressMapInserts."
+    ::= { addressMap 1 }
+
+addressMapDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an address mapping entry has been
+        deleted from the addressMapTable (for any reason).  If
+        an entry is deleted, then inserted, and then deleted, this
+        counter will be incremented by 2.
+
+        Note that the table size can be determined by subtracting
+        addressMapDeletes from addressMapInserts."
+    ::= { addressMap 2 }
+
+addressMapMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries that are desired in the
+        addressMapTable.  The probe will not create more than
+        this number of entries in the table but may choose to create
+        fewer entries in this table for any reason, including the lack
+        of resources.
+
+        If this object is set to a value less than the current number
+        of entries, enough entries are chosen in an
+        implementation-dependent manner and deleted so that the number
+        of entries in the table equals the value of this object.
+
+        If this value is set to -1, the probe may create any number
+        of entries in this table.
+
+        This object may be used to control how resources are allocated
+        on the probe for the various RMON functions."
+    ::= { addressMap 3 }
+
+addressMapControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AddressMapControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table to control the collection of mappings from network
+         layer address to physical address to interface.
+
+        Note that this is not like the typical RMON
+        controlTable and dataTable in which each entry creates
+        its own data table.  Each entry in this table enables the
+        discovery of addresses on a new interface and the placement
+        of address mappings into the central addressMapTable.
+
+        Implementations are encouraged to add an entry per monitored
+        interface upon initialization so that a default collection
+        of address mappings is available."
+    ::= { addressMap 4 }
+
+addressMapControlEntry OBJECT-TYPE
+    SYNTAX      AddressMapControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the addressMapControlTable.
+
+        An example of the indexing of this entry is
+        addressMapControlDroppedFrames.1"
+    INDEX { addressMapControlIndex }
+    ::= { addressMapControlTable 1 }
+
+AddressMapControlEntry ::= SEQUENCE {
+    addressMapControlIndex              Integer32,
+    addressMapControlDataSource         DataSource,
+    addressMapControlDroppedFrames      Counter32,
+    addressMapControlOwner              OwnerString,
+    addressMapControlStatus             RowStatus
+}
+
+addressMapControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique index for this entry in the addressMapControlTable."
+    ::= { addressMapControlEntry 1 }
+
+addressMapControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of data for this addressMapControlEntry."
+    ::= { addressMapControlEntry 2 }
+
+addressMapControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the probe
+        is out of some resources and decides to shed load from this
+        collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { addressMapControlEntry 3 }
+
+addressMapControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { addressMapControlEntry 4 }
+
+addressMapControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this addressMap control entry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the addressMapTable shall be deleted."
+    ::= { addressMapControlEntry 5 }
+
+addressMapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AddressMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of mappings from network layer address to physical
+        address to interface.
+
+        The probe will add entries to this table based on the source
+        MAC and network addresses seen in packets without MAC-level
+        errors.  The probe will populate this table for all protocols
+        in the protocol directory table whose value of
+        protocolDirAddressMapConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirAddressMapConfig value of supportedOff(2)."
+    ::= { addressMap 5 }
+
+addressMapEntry OBJECT-TYPE
+    SYNTAX      AddressMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the addressMapTable.
+
+        The protocolDirLocalIndex in the index identifies the network
+        layer protocol of the addressMapNetworkAddress.
+
+        An example of the indexing of this entry is
+        addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+        care to avoid such combinations."
+    INDEX { addressMapTimeMark, protocolDirLocalIndex,
+            addressMapNetworkAddress, addressMapSource }
+    ::= { addressMapTable 1 }
+
+AddressMapEntry ::= SEQUENCE {
+    addressMapTimeMark                 TimeFilter,
+    addressMapNetworkAddress           OCTET STRING,
+    addressMapSource                   OBJECT IDENTIFIER,
+    addressMapPhysicalAddress          OCTET STRING,
+    addressMapLastChange               TimeStamp
+}
+
+addressMapTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { addressMapEntry 1 }
+
+addressMapNetworkAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network address for this relation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the
+        index.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of ip, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { addressMapEntry 2 }
+
+addressMapSource OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The interface or port on which the associated network
+         address was most recently seen.
+
+        If this address mapping was discovered on an interface, this
+        object shall identify the instance of the ifIndex
+        object, defined in [RFC2863], for the desired interface.
+        For example, if an entry were to receive data from
+        interface #1, this object would be set to ifIndex.1.
+
+        If this address mapping was discovered on a port, this
+        object shall identify the instance of the rptrGroupPortIndex
+        object, defined in [RFC2108], for the desired port.
+        For example, if an entry were to receive data from
+        group #1, port #1, this object would be set to
+        rptrGroupPortIndex.1.1.
+
+        Note that while the dataSource associated with this entry
+        may only point to index objects, this object may at times
+        point to repeater port objects.  This situation occurs when
+        the dataSource points to an interface that is a locally
+        attached repeater and the agent has additional information
+        about the source port of traffic seen on that repeater."
+    ::= { addressMapEntry 3 }
+
+addressMapPhysicalAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last source physical address on which the associated
+        network address was seen.  If the protocol of the associated
+        network address was encapsulated inside of a network-level or
+        higher protocol, this will be the address of the next-lower
+        protocol with the addressRecognitionCapable bit enabled and
+        will be formatted as specified for that protocol."
+    ::= { addressMapEntry 4 }
+
+addressMapLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time this entry was last
+        created or the values of the physical address changed.
+
+        This can be used to help detect duplicate address problems, in
+        which case this object will be updated frequently."
+    ::= { addressMapEntry 5 }
+
+--
+-- Network Layer Host Group
+--
+-- Counts the amount of traffic sent from and to each network address
+-- discovered by the probe.
+-- Note that while the hlHostControlTable also has objects that
+-- control an optional alHostTable, implementation of the alHostTable is
+-- not required to fully implement this group.
+
+hlHostControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF HlHostControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of higher-layer (i.e., non-MAC) host table control
+        entries.
+
+        These entries will enable the collection of the network- and
+        application-level host tables indexed by network addresses.
+        Both the network- and application-level host tables are
+        controlled by this table so that they will both be created
+        and deleted at the same time, further increasing the ease with
+        which they can be implemented as a single datastore.  (Note that
+        if an implementation stores application-layer host records in
+        memory, it can derive network-layer host records from them.)
+
+        Entries in the nlHostTable will be created on behalf of each
+        entry in this table.  Additionally, if this probe implements
+        the alHostTable, entries in the alHostTable will be created on
+        behalf of each entry in this table.
+
+        Implementations are encouraged to add an entry per monitored
+        interface upon initialization so that a default collection
+        of host statistics is available."
+    ::= { nlHost 1 }
+
+hlHostControlEntry OBJECT-TYPE
+    SYNTAX      HlHostControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the hlHostControlTable.
+
+        An example of the indexing of this entry is
+
+        hlHostControlNlDroppedFrames.1"
+    INDEX { hlHostControlIndex }
+    ::= { hlHostControlTable 1 }
+
+HlHostControlEntry ::= SEQUENCE {
+    hlHostControlIndex               Integer32,
+    hlHostControlDataSource          DataSource,
+    hlHostControlNlDroppedFrames     Counter32,
+    hlHostControlNlInserts           Counter32,
+    hlHostControlNlDeletes           Counter32,
+    hlHostControlNlMaxDesiredEntries Integer32,
+    hlHostControlAlDroppedFrames     Counter32,
+    hlHostControlAlInserts           Counter32,
+    hlHostControlAlDeletes           Counter32,
+    hlHostControlAlMaxDesiredEntries Integer32,
+    hlHostControlOwner               OwnerString,
+    hlHostControlStatus              RowStatus
+}
+
+hlHostControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        hlHostControlTable.  Each such entry defines
+        a function that discovers hosts on a particular
+        interface and places statistics about them in the
+        nlHostTable, and optionally in the alHostTable, on
+        behalf of this hlHostControlEntry."
+    ::= { hlHostControlEntry 1 }
+
+hlHostControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of data for the associated host tables.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the
+        identified interface.
+
+        This object may not be modified if the associated
+        hlHostControlStatus object is equal to active(1)."
+    ::= { hlHostControlEntry 2 }
+
+hlHostControlNlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for the associated
+        nlHost entries for whatever reason.  Most often, this event
+        occurs when the probe is out of some resources and decides to
+        shed load from this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that if the nlHostTable is inactive because no protocols
+        are enabled in the protocol directory, this value should be 0.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { hlHostControlEntry 3 }
+
+hlHostControlNlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an nlHost entry has been
+        inserted into the nlHost table.  If an entry is inserted, then
+        deleted, and then inserted, this counter will be incremented
+        by 2.
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlHostControlNlDeletes from hlHostControlNlInserts."
+    ::= { hlHostControlEntry 4 }
+
+hlHostControlNlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an nlHost entry has been
+
+        deleted from the nlHost table (for any reason).  If an entry
+        is deleted, then inserted, and then deleted, this counter will
+        be incremented by 2.
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlHostControlNlDeletes from hlHostControlNlInserts."
+    ::= { hlHostControlEntry 5 }
+
+hlHostControlNlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries that are desired in the
+        nlHostTable on behalf of this control entry.  The probe will
+        not create more than this number of associated entries in the
+        table but may choose to create fewer entries in this table
+        for any reason, including the lack of resources.
+
+        If this object is set to a value less than the current number
+        of entries, enough entries are chosen in an
+        implementation-dependent manner and deleted so that the number
+        of entries in the table equals the value of this object.
+
+        If this value is set to -1, the probe may create any number
+        of entries in this table.  If the associated
+        hlHostControlStatus object is equal to 'active', this
+        object may not be modified.
+
+        This object may be used to control how resources are allocated
+        on the probe for the various RMON functions."
+    ::= { hlHostControlEntry 6 }
+
+hlHostControlAlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for the associated
+
+        alHost entries for whatever reason.  Most often, this event
+        occurs when the probe is out of some resources and decides to
+        shed load from this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that if the alHostTable is not implemented or is inactive
+        because no protocols are enabled in the protocol directory,
+        this value should be 0.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { hlHostControlEntry 7 }
+
+hlHostControlAlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an alHost entry has been
+        inserted into the alHost table.  If an entry is inserted, then
+        deleted, and then inserted, this counter will be incremented
+        by 2.
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlHostControlAlDeletes from hlHostControlAlInserts."
+    ::= { hlHostControlEntry 8 }
+
+hlHostControlAlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an alHost entry has been
+        deleted from the alHost table (for any reason).  If an entry
+        is deleted, then inserted, and then deleted, this counter will
+        be incremented by 2.
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlHostControlAlDeletes from hlHostControlAlInserts."
+    ::= { hlHostControlEntry 9 }
+
+hlHostControlAlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries that are desired in the alHost
+        table on behalf of this control entry.  The probe will not
+        create more than this number of associated entries in the
+        table but may choose to create fewer entries in this table
+        for any reason, including the lack of resources.
+
+        If this object is set to a value less than the current number
+        of entries, enough entries are chosen in an
+        implementation-dependent manner and deleted so that the number
+        of entries in the table equals the value of this object.
+
+        If this value is set to -1, the probe may create any number
+        of entries in this table.  If the associated
+        hlHostControlStatus object is equal to 'active', this
+        object may not be modified.
+
+        This object may be used to control how resources are allocated
+        on the probe for the various RMON functions."
+    ::= { hlHostControlEntry 10 }
+
+hlHostControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { hlHostControlEntry 11 }
+
+hlHostControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this hlHostControlEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the nlHostTable and alHostTable shall be deleted."
+    ::= { hlHostControlEntry 12 }
+
+nlHostTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A collection of statistics for a particular network layer
+        address that has been discovered on an interface of this
+        device.
+
+        The probe will populate this table for all network layer
+        protocols in the protocol directory table whose value of
+        protocolDirHostConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirHostConfig value of supportedOff(2).
+
+        The probe will add to this table all addresses seen
+        as the source or destination address in all packets with no
+        MAC errors, and will increment octet and packet counts in the
+        table for all packets with no MAC errors."
+::= { nlHost 2 }
+
+nlHostEntry OBJECT-TYPE
+    SYNTAX      NlHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the nlHostTable.
+
+        The hlHostControlIndex value in the index identifies the
+        hlHostControlEntry on whose behalf this entry was created.
+        The protocolDirLocalIndex value in the index identifies the
+        network layer protocol of the nlHostAddress.
+
+        An example of the indexing of this entry is
+        nlHostOutPkts.1.783495.18.4.128.2.6.6.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+
+        care to avoid such combinations."
+    INDEX { hlHostControlIndex, nlHostTimeMark,
+            protocolDirLocalIndex, nlHostAddress }
+    ::= { nlHostTable 1 }
+
+NlHostEntry ::= SEQUENCE {
+    nlHostTimeMark              TimeFilter,
+    nlHostAddress               OCTET STRING,
+    nlHostInPkts                ZeroBasedCounter32,
+    nlHostOutPkts               ZeroBasedCounter32,
+    nlHostInOctets              ZeroBasedCounter32,
+    nlHostOutOctets             ZeroBasedCounter32,
+    nlHostOutMacNonUnicastPkts  ZeroBasedCounter32,
+    nlHostCreateTime            LastCreateTime
+}
+
+nlHostTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { nlHostEntry 1 }
+
+nlHostAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network address for this nlHostEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the index.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of IP, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlHostEntry 2 }
+
+nlHostInPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets without errors transmitted to
+
+        this address since it was added to the nlHostTable.  Note that
+        this is the number of link-layer packets, so if a single
+        network-layer packet is fragmented into several link-layer
+        frames, this counter is incremented several times."
+    ::= { nlHostEntry 3 }
+
+nlHostOutPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets without errors transmitted by
+        this address since it was added to the nlHostTable.  Note that
+        this is the number of link-layer packets, so if a single
+        network-layer packet is fragmented into several link-layer
+        frames, this counter is incremented several times."
+    ::= { nlHostEntry 4 }
+
+nlHostInOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets transmitted to this address
+        since it was added to the nlHostTable (excluding
+        framing bits, but including FCS octets), excluding
+        octets in packets that contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { nlHostEntry 5 }
+
+nlHostOutOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets transmitted by this address
+        since it was added to the nlHostTable (excluding
+        framing bits, but including FCS octets), excluding
+        octets in packets that contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { nlHostEntry 6 }
+
+nlHostOutMacNonUnicastPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets without errors transmitted by this
+        address that were directed to any MAC broadcast addresses
+        or to any MAC multicast addresses since this host was
+        added to the nlHostTable.  Note that this is the number of
+        link-layer packets, so if a single network-layer packet is
+        fragmented into several link-layer frames, this counter is
+        incremented several times."
+    ::= { nlHostEntry 7 }
+
+nlHostCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last activated.
+        This can be used by the management station to ensure that the
+        entry has not been deleted and recreated between polls."
+    ::= { nlHostEntry 8 }
+
+--
+-- Network Layer Matrix Group
+--
+-- Counts the amount of traffic sent between each pair of network
+-- addresses discovered by the probe.
+-- Note that while the hlMatrixControlTable also has objects that
+-- control optional alMatrixTables, implementation of the
+-- alMatrixTables is not required to fully implement this group.
+
+hlMatrixControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF HlMatrixControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of higher-layer (i.e., non-MAC) matrix control entries.
+
+        These entries will enable the collection of the network- and
+        application-level matrix tables containing conversation
+        statistics indexed by pairs of network addresses.
+        Both the network- and application-level matrix tables are
+        controlled by this table so that they will both be created
+        and deleted at the same time, further increasing the ease with
+        which they can be implemented as a single datastore.  (Note that
+        if an implementation stores application-layer matrix records
+
+        in memory, it can derive network-layer matrix records from
+        them.)
+
+        Entries in the nlMatrixSDTable and nlMatrixDSTable will be
+        created on behalf of each entry in this table.  Additionally,
+        if this probe implements the alMatrix tables, entries in the
+        alMatrix tables will be created on behalf of each entry in
+        this table."
+    ::= { nlMatrix 1 }
+
+hlMatrixControlEntry OBJECT-TYPE
+    SYNTAX      HlMatrixControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the hlMatrixControlTable.
+
+        An example of indexing of this entry is
+        hlMatrixControlNlDroppedFrames.1"
+    INDEX { hlMatrixControlIndex }
+    ::= { hlMatrixControlTable 1 }
+
+HlMatrixControlEntry ::= SEQUENCE {
+    hlMatrixControlIndex                  Integer32,
+    hlMatrixControlDataSource             DataSource,
+    hlMatrixControlNlDroppedFrames        Counter32,
+    hlMatrixControlNlInserts              Counter32,
+    hlMatrixControlNlDeletes              Counter32,
+    hlMatrixControlNlMaxDesiredEntries    Integer32,
+    hlMatrixControlAlDroppedFrames        Counter32,
+    hlMatrixControlAlInserts              Counter32,
+    hlMatrixControlAlDeletes              Counter32,
+    hlMatrixControlAlMaxDesiredEntries    Integer32,
+    hlMatrixControlOwner                  OwnerString,
+    hlMatrixControlStatus                 RowStatus
+}
+
+hlMatrixControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        hlMatrixControlTable.  Each such entry defines
+        a function that discovers conversations on a particular
+        interface and places statistics about them in the
+        nlMatrixSDTable and the nlMatrixDSTable, and optionally the
+        alMatrixSDTable and alMatrixDSTable, on behalf of this
+
+        hlMatrixControlEntry."
+    ::= { hlMatrixControlEntry 1 }
+
+hlMatrixControlDataSource OBJECT-TYPE
+    SYNTAX      DataSource
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of the data for the associated matrix tables.
+
+        The statistics in this group reflect all packets
+        on the local network segment attached to the
+        identified interface.
+
+        This object may not be modified if the associated
+        hlMatrixControlStatus object is equal to active(1)."
+    ::= { hlMatrixControlEntry 2 }
+
+hlMatrixControlNlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the probe
+        is out of some resources and decides to shed load from this
+        collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that if the nlMatrixTables are inactive because no
+        protocols are enabled in the protocol directory, this value
+        should be 0.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { hlMatrixControlEntry 3 }
+
+hlMatrixControlNlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an nlMatrix entry has been
+        inserted into the nlMatrix tables.  If an entry is inserted,
+        then deleted, and then inserted, this counter will be
+        incremented by 2.  The addition of a conversation into both
+        the nlMatrixSDTable and nlMatrixDSTable shall be counted as
+        two insertions (even though every addition into one table must
+        be accompanied by an insertion into the other).
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the sum of then nlMatrixSDTable and nlMatrixDSTable
+        sizes can be determined by subtracting
+        hlMatrixControlNlDeletes from hlMatrixControlNlInserts."
+    ::= { hlMatrixControlEntry 4 }
+
+hlMatrixControlNlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an nlMatrix entry has been
+        deleted from the nlMatrix tables (for any reason).  If an
+        entry is deleted, then inserted, and then deleted, this
+        counter will be incremented by 2.  The deletion of a
+        conversation from both the nlMatrixSDTable and nlMatrixDSTable
+        shall be counted as two deletions (even though every deletion
+        from one table must be accompanied by a deletion from the
+        other).
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlMatrixControlNlDeletes from hlMatrixControlNlInserts."
+    ::= { hlMatrixControlEntry 5 }
+
+hlMatrixControlNlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries that are desired in the
+        nlMatrix tables on behalf of this control entry.  The probe
+        will not create more than this number of associated entries in
+        the table but may choose to create fewer entries in this
+        table for any reason, including the lack of resources.
+
+        If this object is set to a value less than the current number
+        of entries, enough entries are chosen in an
+        implementation-dependent manner and deleted so that the number
+        of entries in the table equals the value of this object.
+
+        If this value is set to -1, the probe may create any number
+        of entries in this table.  If the associated
+        hlMatrixControlStatus object is equal to 'active', this
+        object may not be modified.
+
+        This object may be used to control how resources are allocated
+        on the probe for the various RMON functions."
+    ::= { hlMatrixControlEntry 6 }
+
+hlMatrixControlAlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the probe
+        is out of some resources and decides to shed load from this
+        collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that if the alMatrixTables are not implemented or are
+        inactive because no protocols are enabled in the protocol
+        directory, this value should be 0.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { hlMatrixControlEntry 7 }
+
+hlMatrixControlAlInserts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an alMatrix entry has been
+        inserted into the alMatrix tables.  If an entry is inserted,
+        then deleted, and then inserted, this counter will be
+        incremented by 2.  The addition of a conversation into both
+        the alMatrixSDTable and alMatrixDSTable shall be counted as
+        two insertions (even though every addition into one table must
+        be accompanied by an insertion into the other).
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlMatrixControlAlDeletes from hlMatrixControlAlInserts."
+    ::= { hlMatrixControlEntry 8 }
+
+hlMatrixControlAlDeletes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of times an alMatrix entry has been
+        deleted from the alMatrix tables.  If an entry is deleted,
+        then inserted, and then deleted, this counter will be
+        incremented by 2.  The deletion of a conversation from both
+        the alMatrixSDTable and alMatrixDSTable shall be counted as
+        two deletions (even though every deletion from one table must
+        be accompanied by a deletion from the other).
+
+        To allow for efficient implementation strategies, agents may
+        delay updating this object for short periods of time.  For
+        example, an implementation strategy may allow internal
+        data structures to differ from those visible via SNMP for
+        short periods of time.  This counter may reflect the internal
+        data structures for those short periods of time.
+
+        Note that the table size can be determined by subtracting
+        hlMatrixControlAlDeletes from hlMatrixControlAlInserts."
+    ::= { hlMatrixControlEntry 9 }
+
+hlMatrixControlAlMaxDesiredEntries OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries that are desired in the
+        alMatrix tables on behalf of this control entry.  The probe
+        will not create more than this number of associated entries in
+        the table but may choose to create fewer entries in this
+        table for any reason, including the lack of resources.
+
+        If this object is set to a value less than the current number
+        of entries, enough entries are chosen in an
+        implementation-dependent manner and deleted so that the number
+        of entries in the table equals the value of this object.
+
+        If this value is set to -1, the probe may create any number
+        of entries in this table.  If the associated
+        hlMatrixControlStatus object is equal to 'active', this
+        object may not be modified.
+
+        This object may be used to control how resources are allocated
+        on the probe for the various RMON functions."
+    ::= { hlMatrixControlEntry 10 }
+
+hlMatrixControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { hlMatrixControlEntry 11 }
+
+hlMatrixControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this hlMatrixControlEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all
+        associated entries in the nlMatrixSDTable,
+        nlMatrixDSTable, alMatrixSDTable, and alMatrixDSTable
+        shall be deleted by the agent."
+    ::= { hlMatrixControlEntry 12 }
+
+nlMatrixSDTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlMatrixSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of traffic matrix entries that collect statistics for
+        conversations between two network-level addresses.  This table
+        is indexed first by the source address and then by the
+        destination address to make it convenient to collect all
+        conversations from a particular address.
+
+        The probe will populate this table for all network layer
+        protocols in the protocol directory table whose value of
+        protocolDirMatrixConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirMatrixConfig value of supportedOff(2).
+
+        The probe will add to this table all pairs of addresses
+        seen in all packets with no MAC errors and will increment
+        octet and packet counts in the table for all packets with no
+        MAC errors.
+
+        Further, this table will only contain entries that have a
+        corresponding entry in the nlMatrixDSTable with the same
+        source address and destination address."
+    ::= { nlMatrix 2 }
+
+nlMatrixSDEntry OBJECT-TYPE
+    SYNTAX      NlMatrixSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the nlMatrixSDTable.
+
+        The hlMatrixControlIndex value in the index identifies the
+        hlMatrixControlEntry on whose behalf this entry was created.
+        The protocolDirLocalIndex value in the index identifies the
+        network-layer protocol of the nlMatrixSDSourceAddress and
+        nlMatrixSDDestAddress.
+
+        An example of the indexing of this table is
+        nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+        care to avoid such combinations."
+    INDEX { hlMatrixControlIndex, nlMatrixSDTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixSDSourceAddress, nlMatrixSDDestAddress }
+    ::= { nlMatrixSDTable 1 }
+
+NlMatrixSDEntry ::= SEQUENCE {
+    nlMatrixSDTimeMark              TimeFilter,
+    nlMatrixSDSourceAddress         OCTET STRING,
+    nlMatrixSDDestAddress           OCTET STRING,
+    nlMatrixSDPkts                  ZeroBasedCounter32,
+    nlMatrixSDOctets                ZeroBasedCounter32,
+    nlMatrixSDCreateTime            LastCreateTime
+}
+
+nlMatrixSDTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { nlMatrixSDEntry 1 }
+
+nlMatrixSDSourceAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network source address for this nlMatrixSDEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the index.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of IP, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlMatrixSDEntry 2 }
+
+nlMatrixSDDestAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network destination address for this
+        nlMatrixSDEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the index.
+
+        For example, if the protocolDirLocalIndex indicates an
+
+        encapsulation of IP, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlMatrixSDEntry 3 }
+
+nlMatrixSDPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets without errors transmitted from the
+        source address to the destination address since this entry was
+        added to the nlMatrixSDTable.  Note that this is the number of
+        link-layer packets, so if a single network-layer packet is
+        fragmented into several link-layer frames, this counter is
+        incremented several times."
+    ::= { nlMatrixSDEntry 4 }
+
+nlMatrixSDOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets transmitted from the source address to
+        the destination address since this entry was added to the
+        nlMatrixSDTable (excluding framing bits, but
+        including FCS octets), excluding octets in packets that
+        contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { nlMatrixSDEntry 5 }
+
+nlMatrixSDCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last activated.
+        This can be used by the management station to ensure that the
+        entry has not been deleted and recreated between polls."
+    ::= { nlMatrixSDEntry 6 }
+
+-- Traffic matrix tables from destination to source
+
+nlMatrixDSTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlMatrixDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of traffic matrix entries that collect statistics for
+        conversations between two network-level addresses.  This table
+        is indexed first by the destination address and then by the
+        source address to make it convenient to collect all
+        conversations to a particular address.
+
+        The probe will populate this table for all network layer
+        protocols in the protocol directory table whose value of
+        protocolDirMatrixConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirMatrixConfig value of supportedOff(2).
+
+        The probe will add to this table all pairs of addresses
+        seen in all packets with no MAC errors and will increment
+        octet and packet counts in the table for all packets with no
+        MAC errors.
+
+        Further, this table will only contain entries that have a
+        corresponding entry in the nlMatrixSDTable with the same
+        source address and destination address."
+    ::= { nlMatrix 3 }
+
+nlMatrixDSEntry OBJECT-TYPE
+    SYNTAX      NlMatrixDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the nlMatrixDSTable.
+
+        The hlMatrixControlIndex value in the index identifies the
+        hlMatrixControlEntry on whose behalf this entry was created.
+        The protocolDirLocalIndex value in the index identifies the
+        network-layer protocol of the nlMatrixDSSourceAddress and
+        nlMatrixDSDestAddress.
+
+        An example of the indexing of this table is
+        nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+        care to avoid such combinations."
+    INDEX { hlMatrixControlIndex, nlMatrixDSTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixDSDestAddress, nlMatrixDSSourceAddress }
+    ::= { nlMatrixDSTable 1 }
+
+NlMatrixDSEntry ::= SEQUENCE {
+    nlMatrixDSTimeMark                 TimeFilter,
+    nlMatrixDSSourceAddress            OCTET STRING,
+    nlMatrixDSDestAddress              OCTET STRING,
+    nlMatrixDSPkts                     ZeroBasedCounter32,
+    nlMatrixDSOctets                   ZeroBasedCounter32,
+    nlMatrixDSCreateTime               LastCreateTime
+}
+
+nlMatrixDSTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { nlMatrixDSEntry 1 }
+
+nlMatrixDSSourceAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network source address for this nlMatrixDSEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the index.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of IP, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlMatrixDSEntry 2 }
+
+nlMatrixDSDestAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network destination address for this
+        nlMatrixDSEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+
+        by the protocolDirLocalIndex component of the index.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of IP, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlMatrixDSEntry 3 }
+
+nlMatrixDSPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets without errors transmitted from the
+        source address to the destination address since this entry was
+        added to the nlMatrixDSTable.  Note that this is the number of
+        link-layer packets, so if a single network-layer packet is
+        fragmented into several link-layer frames, this counter is
+        incremented several times."
+    ::= { nlMatrixDSEntry 4 }
+
+nlMatrixDSOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets transmitted from the source address
+        to the destination address since this entry was added to the
+        nlMatrixDSTable (excluding framing bits, but
+        including FCS octets), excluding octets in packets that
+        contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { nlMatrixDSEntry 5 }
+
+nlMatrixDSCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last activated.
+        This can be used by the management station to ensure that the
+        entry has not been deleted and recreated between polls."
+    ::= { nlMatrixDSEntry 6 }
+
+nlMatrixTopNControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NlMatrixTopNControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of parameters that control the creation of a
+        report of the top N matrix entries according to
+        a selected metric."
+    ::= { nlMatrix 4 }
+
+nlMatrixTopNControlEntry OBJECT-TYPE
+    SYNTAX      NlMatrixTopNControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the nlMatrixTopNControlTable.
+
+        An example of the indexing of this table is
+        nlMatrixTopNControlDuration.3"
+    INDEX { nlMatrixTopNControlIndex }
+    ::= { nlMatrixTopNControlTable 1 }
+
+NlMatrixTopNControlEntry ::= SEQUENCE {
+    nlMatrixTopNControlIndex            Integer32,
+    nlMatrixTopNControlMatrixIndex      Integer32,
+    nlMatrixTopNControlRateBase         INTEGER,
+    nlMatrixTopNControlTimeRemaining    Integer32,
+    nlMatrixTopNControlGeneratedReports Counter32,
+    nlMatrixTopNControlDuration         Integer32,
+    nlMatrixTopNControlRequestedSize    Integer32,
+    nlMatrixTopNControlGrantedSize      Integer32,
+    nlMatrixTopNControlStartTime        TimeStamp,
+    nlMatrixTopNControlOwner            OwnerString,
+    nlMatrixTopNControlStatus           RowStatus
+}
+
+nlMatrixTopNControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the nlMatrixTopNControlTable.  Each such
+        entry defines one topN report prepared for
+        one interface."
+    ::= { nlMatrixTopNControlEntry 1 }
+
+nlMatrixTopNControlMatrixIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The nlMatrix[SD/DS] table for which a topN report will be
+        prepared on behalf of this entry.  The nlMatrix[SD/DS] table
+        is identified by the value of the hlMatrixControlIndex
+        for that table - that value is used here to identify the
+        particular table.
+
+        This object may not be modified if the associated
+        nlMatrixTopNControlStatus object is equal to active(1)."
+    ::= { nlMatrixTopNControlEntry 2 }
+
+nlMatrixTopNControlRateBase OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    nlMatrixTopNPkts(1),
+                    nlMatrixTopNOctets(2),
+                    nlMatrixTopNHighCapacityPkts(3),
+                    nlMatrixTopNHighCapacityOctets(4)
+                }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The variable for each nlMatrix[SD/DS] entry that the
+        nlMatrixTopNEntries are sorted by, as well as a control
+        for the table that the results will be reported in.
+
+        This object may not be modified if the associated
+        nlMatrixTopNControlStatus object is equal to active(1).
+
+        If this value is less than or equal to 2, when the report
+        is prepared, entries are created in the nlMatrixTopNTable
+        associated with this object.
+        If this value is greater than or equal to 3, when the report
+        is prepared, entries are created in the
+        nlMatrixTopNHighCapacityTable associated with this object."
+    ::= { nlMatrixTopNControlEntry 3 }
+
+nlMatrixTopNControlTimeRemaining OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The number of seconds left in the report currently
+        being collected.  When this object is modified by
+        the management station, a new collection is started,
+        possibly aborting a currently running report.  The
+        new value is used as the requested duration of this
+
+        report and is immediately loaded into the associated
+        nlMatrixTopNControlDuration object.
+
+        When the report finishes, the probe will automatically
+        start another collection with the same initial value
+        of nlMatrixTopNControlTimeRemaining.  Thus, the management
+        station may simply read the resulting reports repeatedly,
+        checking the startTime and duration each time to ensure that a
+        report was not missed or that the report parameters were not
+        changed.
+
+        While the value of this object is non-zero, it decrements
+        by one per second until it reaches zero.  At the time
+        that this object decrements to zero, the report is made
+        accessible in the nlMatrixTopNTable, overwriting any report
+        that may be there.
+
+        When this object is modified by the management station, any
+        associated entries in the nlMatrixTopNTable shall be deleted.
+
+        (Note that this is a different algorithm than the one used
+        in the hostTopNTable)."
+    DEFVAL { 1800 }
+    ::= { nlMatrixTopNControlEntry 4 }
+
+nlMatrixTopNControlGeneratedReports OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of reports that have been generated by this entry."
+    ::= { nlMatrixTopNControlEntry 5 }
+
+nlMatrixTopNControlDuration OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of seconds that this report has collected
+        during the last sampling interval.
+
+        When the associated nlMatrixTopNControlTimeRemaining object is
+        set, this object shall be set by the probe to the
+        same value and shall not be modified until the next
+        time the nlMatrixTopNControlTimeRemaining is set.
+
+        This value shall be zero if no reports have been
+        requested for this nlMatrixTopNControlEntry."
+    ::= { nlMatrixTopNControlEntry 6 }
+
+nlMatrixTopNControlRequestedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of matrix entries requested for this report.
+
+        When this object is created or modified, the probe
+        should set nlMatrixTopNControlGrantedSize as closely to this
+        object as possible for the particular probe
+        implementation and available resources."
+    DEFVAL { 150 }
+    ::= { nlMatrixTopNControlEntry 7 }
+
+nlMatrixTopNControlGrantedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of matrix entries in this report.
+
+        When the associated nlMatrixTopNControlRequestedSize object is
+        created or modified, the probe should set this
+        object as closely to the requested value as
+        possible for the particular implementation and
+        available resources.  The probe must not lower this
+        value except as a side-effect of a set to the associated
+        nlMatrixTopNControlRequestedSize object.
+
+        If the value of nlMatrixTopNControlRateBase is equal to
+        nlMatrixTopNPkts, when the next topN report is generated,
+        matrix entries with the highest value of nlMatrixTopNPktRate
+        shall be placed in this table in decreasing order of this rate
+        until there is no more room or until there are no more
+        matrix entries.
+
+        If the value of nlMatrixTopNControlRateBase is equal to
+        nlMatrixTopNOctets, when the next topN report is generated,
+        matrix entries with the highest value of nlMatrixTopNOctetRate
+        shall be placed in this table in decreasing order of this rate
+        until there is no more room or until there are no more
+        matrix entries.
+
+        It is an implementation-specific matter how entries with the
+        same value of nlMatrixTopNPktRate or nlMatrixTopNOctetRate are
+        sorted.  It is also an implementation-specific matter as to
+
+        whether zero-valued entries are available."
+    ::= { nlMatrixTopNControlEntry 8 }
+
+nlMatrixTopNControlStartTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this topN report was
+        last started.  In other words, this is the time that
+        the associated nlMatrixTopNControlTimeRemaining object was
+        modified to start the requested report or the time
+        the report was last automatically (re)started.
+
+        This object may be used by the management station to
+        determine whether a report was missed."
+    ::= { nlMatrixTopNControlEntry 9 }
+
+nlMatrixTopNControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { nlMatrixTopNControlEntry 10 }
+
+nlMatrixTopNControlStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this nlMatrixTopNControlEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all
+        associated entries in the nlMatrixTopNTable shall be deleted
+        by the agent."
+    ::= { nlMatrixTopNControlEntry 11 }
+
+nlMatrixTopNTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NlMatrixTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of statistics for those network-layer matrix entries
+
+        that have counted the highest number of octets or packets."
+    ::= { nlMatrix 5 }
+
+nlMatrixTopNEntry OBJECT-TYPE
+    SYNTAX     NlMatrixTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A conceptual row in the nlMatrixTopNTable.
+
+        The nlMatrixTopNControlIndex value in the index identifies the
+        nlMatrixTopNControlEntry on whose behalf this entry was
+        created.
+
+        An example of the indexing of this table is
+        nlMatrixTopNPktRate.3.10"
+    INDEX { nlMatrixTopNControlIndex, nlMatrixTopNIndex }
+    ::= { nlMatrixTopNTable 1 }
+
+NlMatrixTopNEntry ::= SEQUENCE {
+    nlMatrixTopNIndex                 Integer32,
+    nlMatrixTopNProtocolDirLocalIndex Integer32,
+    nlMatrixTopNSourceAddress         OCTET STRING,
+    nlMatrixTopNDestAddress           OCTET STRING,
+    nlMatrixTopNPktRate               Gauge32,
+    nlMatrixTopNReversePktRate        Gauge32,
+    nlMatrixTopNOctetRate             Gauge32,
+    nlMatrixTopNReverseOctetRate      Gauge32
+}
+
+nlMatrixTopNIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in
+        the nlMatrixTopNTable among those in the same report.
+        This index is between 1 and N, where N is the
+        number of entries in this report.
+
+        If the value of nlMatrixTopNControlRateBase is equal to
+        nlMatrixTopNPkts, increasing values of nlMatrixTopNIndex shall
+        be assigned to entries with decreasing values of
+        nlMatrixTopNPktRate until index N is assigned or there are no
+        more nlMatrixTopNEntries.
+
+        If the value of nlMatrixTopNControlRateBase is equal to
+        nlMatrixTopNOctets, increasing values of nlMatrixTopNIndex
+
+        shall be assigned to entries with decreasing values of
+        nlMatrixTopNOctetRate until index N is assigned or there are
+        no more nlMatrixTopNEntries."
+    ::= { nlMatrixTopNEntry 1 }
+
+nlMatrixTopNProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The protocolDirLocalIndex of the network-layer protocol of
+        this entry's network address."
+    ::= { nlMatrixTopNEntry 2 }
+
+nlMatrixTopNSourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network-layer address of the source host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated nlMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of IP, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlMatrixTopNEntry 3 }
+
+nlMatrixTopNDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network-layer address of the destination host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated nlMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the nlMatrixTopNProtocolDirLocalIndex
+        indicates an encapsulation of IP, this object is encoded as a
+        length octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { nlMatrixTopNEntry 4 }
+
+nlMatrixTopNPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the source host
+        to the destination host during this sampling interval, counted
+        using the rules for counting the nlMatrixSDPkts object.
+        If the value of nlMatrixTopNControlRateBase is
+        nlMatrixTopNPkts, this variable will be used to sort this
+        report."
+    ::= { nlMatrixTopNEntry 5 }
+
+nlMatrixTopNReversePktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen from the destination host to the
+        source host during this sampling interval, counted
+        using the rules for counting the nlMatrixSDPkts object.  (Note
+        that the corresponding nlMatrixSDPkts object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNPkts, the sort of topN entries is based
+        entirely on nlMatrixTopNPktRate, and not on the value of this
+        object."
+    ::= { nlMatrixTopNEntry 6 }
+
+nlMatrixTopNOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the source host
+        to the destination host during this sampling interval, counted
+        using the rules for counting the nlMatrixSDOctets object.  If
+        the value of nlMatrixTopNControlRateBase is
+        nlMatrixTopNOctets, this variable will be used to sort this
+        report."
+    ::= { nlMatrixTopNEntry 7 }
+
+nlMatrixTopNReverseOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen from the destination host to the
+        source host during this sampling interval, counted
+        using the rules for counting the nlMatrixDSOctets object.  (Note
+        that the corresponding nlMatrixSDOctets object selected is the
+        one whose source address is equal to nlMatrixTopNDestAddress
+        and whose destination address is equal to
+        nlMatrixTopNSourceAddress.)
+
+        Note that if the value of nlMatrixTopNControlRateBase is equal
+        to nlMatrixTopNOctets, the sort of topN entries is based
+        entirely on nlMatrixTopNOctetRate, and not on the value of
+        this object."
+    ::= { nlMatrixTopNEntry 8 }
+
+-- Application Layer Functions
+--
+-- The application layer host, matrix, and matrixTopN functions report
+-- on protocol usage at the network layer or higher.  Note that the
+-- use of the term application layer does not imply that only
+-- application-layer protocols are counted, rather it means that
+-- protocols up to and including the application layer are supported.
+
+--
+-- Application Layer Host Group
+--
+-- Counts the amount of traffic, by protocol, sent from and to each
+-- network address discovered by the probe.
+-- Implementation of this group requires implementation of the Network
+-- Layer Host Group.
+
+alHostTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AlHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A collection of statistics for a particular protocol from a
+        particular network address that has been discovered on an
+        interface of this device.
+
+        The probe will populate this table for all protocols in the
+        protocol directory table whose value of
+        protocolDirHostConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirHostConfig value of supportedOff(2).
+
+        The probe will add to this table all addresses
+        seen as the source or destination address in all packets with
+        no MAC errors and will increment octet and packet counts in
+        the table for all packets with no MAC errors.  Further,
+        entries will only be added to this table if their address
+        exists in the nlHostTable and will be deleted from this table
+        if their address is deleted from the nlHostTable."
+    ::= { alHost 1 }
+
+alHostEntry OBJECT-TYPE
+    SYNTAX      AlHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the alHostTable.
+
+        The hlHostControlIndex value in the index identifies the
+        hlHostControlEntry on whose behalf this entry was created.
+        The first protocolDirLocalIndex value in the index identifies
+        the network-layer protocol of the address.
+        The nlHostAddress value in the index identifies the network-
+        layer address of this entry.
+        The second protocolDirLocalIndex value in the index identifies
+        the protocol that is counted by this entry.
+
+        An example of the indexing in this entry is
+        alHostOutPkts.1.783495.18.4.128.2.6.6.34.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+        care to avoid such combinations."
+    INDEX { hlHostControlIndex, alHostTimeMark,
+            protocolDirLocalIndex, nlHostAddress,
+            protocolDirLocalIndex }
+    ::= { alHostTable 1 }
+
+AlHostEntry ::= SEQUENCE {
+    alHostTimeMark                 TimeFilter,
+    alHostInPkts                   ZeroBasedCounter32,
+    alHostOutPkts                  ZeroBasedCounter32,
+    alHostInOctets                 ZeroBasedCounter32,
+    alHostOutOctets                ZeroBasedCounter32,
+    alHostCreateTime               LastCreateTime
+}
+
+alHostTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { alHostEntry 1 }
+
+alHostInPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets of this protocol type without errors
+        transmitted to this address since it was added to the
+        alHostTable.  Note that this is the number of link-layer
+        packets, so if a single network-layer packet is fragmented
+        into several link-layer frames, this counter is incremented
+        several times."
+    ::= { alHostEntry 2 }
+
+alHostOutPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets of this protocol type without errors
+        transmitted by this address since it was added to the
+        alHostTable.  Note that this is the number of link-layer
+        packets, so if a single network-layer packet is fragmented
+        into several link-layer frames, this counter is incremented
+        several times."
+     ::= { alHostEntry 3 }
+
+alHostInOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets transmitted to this address
+        of this protocol type since it was added to the
+        alHostTable (excluding framing bits, but including
+        FCS octets), excluding octets in packets that
+        contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { alHostEntry 4 }
+
+alHostOutOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets transmitted by this address
+        of this protocol type since it was added to the
+        alHostTable (excluding framing bits, but including
+        FCS octets), excluding octets in packets that
+        contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { alHostEntry 5 }
+
+alHostCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last activated.
+        This can be used by the management station to ensure that the
+        entry has not been deleted and recreated between polls."
+    ::= { alHostEntry 6 }
+
+--
+-- Application Layer Matrix Group
+--
+-- Counts the amount of traffic, by protocol, sent between each pair
+-- of network addresses discovered by the probe.
+-- Implementation of this group requires implementation of the Network
+-- Layer Matrix Group.
+
+alMatrixSDTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AlMatrixSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of application traffic matrix entries that collect
+        statistics for conversations of a particular protocol between
+        two network-level addresses.  This table is indexed first by
+        the source address and then by the destination address to make
+        it convenient to collect all statistics from a particular
+        address.
+
+        The probe will populate this table for all protocols in the
+        protocol directory table whose value of
+
+        protocolDirMatrixConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirMatrixConfig value of supportedOff(2).
+
+        The probe will add to this table all pairs of addresses for
+        all protocols seen in all packets with no MAC errors and will
+        increment octet and packet counts in the table for all packets
+        with no MAC errors.  Further, entries will only be added to
+        this table if their address pair exists in the nlMatrixSDTable
+        and will be deleted from this table if the address pair is
+        deleted from the nlMatrixSDTable."
+    ::= { alMatrix 1 }
+
+alMatrixSDEntry OBJECT-TYPE
+    SYNTAX      AlMatrixSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the alMatrixSDTable.
+
+        The hlMatrixControlIndex value in the index identifies the
+        hlMatrixControlEntry on whose behalf this entry was created.
+        The first protocolDirLocalIndex value in the index identifies
+        the network-layer protocol of the nlMatrixSDSourceAddress and
+        nlMatrixSDDestAddress.
+        The nlMatrixSDSourceAddress value in the index identifies the
+        network-layer address of the source host in this conversation.
+        The nlMatrixSDDestAddress value in the index identifies the
+        network-layer address of the destination host in this
+        conversation.
+        The second protocolDirLocalIndex value in the index identifies
+        the protocol that is counted by this entry.
+
+        An example of the indexing of this entry is
+        alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+        care to avoid such combinations."
+    INDEX { hlMatrixControlIndex, alMatrixSDTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixSDSourceAddress, nlMatrixSDDestAddress,
+            protocolDirLocalIndex }
+    ::= { alMatrixSDTable 1 }
+
+AlMatrixSDEntry ::= SEQUENCE {
+    alMatrixSDTimeMark                 TimeFilter,
+    alMatrixSDPkts                     ZeroBasedCounter32,
+    alMatrixSDOctets                   ZeroBasedCounter32,
+    alMatrixSDCreateTime               LastCreateTime
+}
+
+alMatrixSDTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { alMatrixSDEntry 1 }
+
+alMatrixSDPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets of this protocol type without errors
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixSDTable.  Note that
+        this is the number of link-layer packets, so if a single
+        network-layer packet is fragmented into several link-layer
+        frames, this counter is incremented several times."
+    ::= { alMatrixSDEntry 2 }
+
+alMatrixSDOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets in packets of this protocol type
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixSDTable (excluding
+        framing bits, but including FCS octets), excluding octets
+        in packets that contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { alMatrixSDEntry 3 }
+
+alMatrixSDCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last activated.
+        This can be used by the management station to ensure that the
+        entry has not been deleted and recreated between polls."
+    ::= { alMatrixSDEntry 4 }
+
+-- Traffic matrix tables from destination to source
+
+alMatrixDSTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AlMatrixDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of application traffic matrix entries that collect
+        statistics for conversations of a particular protocol between
+        two network-level addresses.  This table is indexed first by
+        the destination address and then by the source address to make
+        it convenient to collect all statistics to a particular
+        address.
+
+        The probe will populate this table for all protocols in the
+        protocol directory table whose value of
+        protocolDirMatrixConfig is equal to supportedOn(3), and
+        will delete any entries whose protocolDirEntry is deleted or
+        has a protocolDirMatrixConfig value of supportedOff(2).
+
+        The probe will add to this table all pairs of addresses for
+        all protocols seen in all packets with no MAC errors and will
+        increment octet and packet counts in the table for all packets
+        with no MAC errors.  Further, entries will only be added to
+        this table if their address pair exists in the nlMatrixDSTable
+        and will be deleted from this table if the address pair is
+        deleted from the nlMatrixDSTable."
+    ::= { alMatrix 2 }
+
+alMatrixDSEntry OBJECT-TYPE
+    SYNTAX      AlMatrixDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the alMatrixDSTable.
+
+        The hlMatrixControlIndex value in the index identifies the
+        hlMatrixControlEntry on whose behalf this entry was created.
+        The first protocolDirLocalIndex value in the index identifies
+        the network-layer protocol of the alMatrixDSSourceAddress and
+        alMatrixDSDestAddress.
+        The nlMatrixDSDestAddress value in the index identifies the
+        network-layer address of the destination host in this
+
+        conversation.
+        The nlMatrixDSSourceAddress value in the index identifies the
+        network-layer address of the source host in this conversation.
+        The second protocolDirLocalIndex value in the index identifies
+        the protocol that is counted by this entry.
+
+        An example of the indexing of this entry is
+        alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34.
+
+        Note that some combinations of index values may result in an
+        index that exceeds 128 sub-identifiers in length, which exceeds
+        the maximum for the SNMP protocol.  Implementations should take
+        care to avoid such combinations."
+    INDEX { hlMatrixControlIndex, alMatrixDSTimeMark,
+            protocolDirLocalIndex,
+            nlMatrixDSDestAddress, nlMatrixDSSourceAddress,
+            protocolDirLocalIndex }
+    ::= { alMatrixDSTable 1 }
+
+AlMatrixDSEntry ::= SEQUENCE {
+    alMatrixDSTimeMark                 TimeFilter,
+    alMatrixDSPkts                     ZeroBasedCounter32,
+    alMatrixDSOctets                   ZeroBasedCounter32,
+    alMatrixDSCreateTime               LastCreateTime
+}
+
+alMatrixDSTimeMark OBJECT-TYPE
+    SYNTAX      TimeFilter
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A TimeFilter for this entry.  See the TimeFilter textual
+        convention to see how this works."
+    ::= { alMatrixDSEntry 1 }
+
+alMatrixDSPkts OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets of this protocol type without errors
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixDSTable.  Note that
+        this is the number of link-layer packets, so if a single
+        network-layer packet is fragmented into several link-layer
+        frames, this counter is incremented several times."
+    ::= { alMatrixDSEntry 2 }
+
+alMatrixDSOctets OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of octets in packets of this protocol type
+        transmitted from the source address to the destination address
+        since this entry was added to the alMatrixDSTable (excluding
+        framing bits, but including FCS octets), excluding octets
+        in packets that contained errors.
+
+        Note that this doesn't count just those octets in the particular
+        protocol frames but includes the entire packet that contained
+        the protocol."
+    ::= { alMatrixDSEntry 3 }
+
+alMatrixDSCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this entry was last activated.
+        This can be used by the management station to ensure that the
+        entry has not been deleted and recreated between polls."
+    ::= { alMatrixDSEntry 4 }
+
+alMatrixTopNControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF AlMatrixTopNControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of parameters that control the creation of a
+        report of the top N matrix entries according to
+        a selected metric."
+    ::= { alMatrix 3 }
+
+alMatrixTopNControlEntry OBJECT-TYPE
+    SYNTAX      AlMatrixTopNControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the alMatrixTopNControlTable.
+
+        An example of the indexing of this table is
+        alMatrixTopNControlDuration.3"
+    INDEX { alMatrixTopNControlIndex }
+    ::= { alMatrixTopNControlTable 1 }
+
+AlMatrixTopNControlEntry ::= SEQUENCE {
+    alMatrixTopNControlIndex            Integer32,
+    alMatrixTopNControlMatrixIndex      Integer32,
+    alMatrixTopNControlRateBase         INTEGER,
+    alMatrixTopNControlTimeRemaining    Integer32,
+    alMatrixTopNControlGeneratedReports Counter32,
+    alMatrixTopNControlDuration         Integer32,
+    alMatrixTopNControlRequestedSize    Integer32,
+    alMatrixTopNControlGrantedSize      Integer32,
+    alMatrixTopNControlStartTime        TimeStamp,
+    alMatrixTopNControlOwner            OwnerString,
+    alMatrixTopNControlStatus           RowStatus
+}
+
+alMatrixTopNControlIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry
+        in the alMatrixTopNControlTable.  Each such
+        entry defines one topN report prepared for
+        one interface."
+    ::= { alMatrixTopNControlEntry 1 }
+
+alMatrixTopNControlMatrixIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The alMatrix[SD/DS] table for which a topN report will be
+        prepared on behalf of this entry.  The alMatrix[SD/DS] table
+        is identified by the value of the hlMatrixControlIndex
+        for that table - that value is used here to identify the
+        particular table.
+
+        This object may not be modified if the associated
+        alMatrixTopNControlStatus object is equal to active(1)."
+    ::= { alMatrixTopNControlEntry 2 }
+
+alMatrixTopNControlRateBase OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  alMatrixTopNTerminalsPkts(1),
+                  alMatrixTopNTerminalsOctets(2),
+                  alMatrixTopNAllPkts(3),
+                  alMatrixTopNAllOctets(4),
+                  alMatrixTopNTerminalsHighCapacityPkts(5),
+                  alMatrixTopNTerminalsHighCapacityOctets(6),
+                  alMatrixTopNAllHighCapacityPkts(7),
+                  alMatrixTopNAllHighCapacityOctets(8)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This object controls which alMatrix[SD/DS] entry that the
+        alMatrixTopNEntries are sorted by, which view of the matrix
+        table that will be used, as well as which table the results
+        will be reported in.
+
+        The values alMatrixTopNTerminalsPkts,
+        alMatrixTopNTerminalsOctets,
+        alMatrixTopNTerminalsHighCapacityPkts, and
+        alMatrixTopNTerminalsHighCapacityOctets cause collection
+        only from protocols that have no child protocols that are
+        counted.  The values alMatrixTopNAllPkts,
+        alMatrixTopNAllOctets, alMatrixTopNAllHighCapacityPkts, and
+        alMatrixTopNAllHighCapacityOctets cause collection from all
+        alMatrix entries.
+
+        This object may not be modified if the associated
+        alMatrixTopNControlStatus object is equal to active(1)."
+    ::= { alMatrixTopNControlEntry 3 }
+
+alMatrixTopNControlTimeRemaining OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The number of seconds left in the report currently
+        being collected.  When this object is modified by
+        the management station, a new collection is started,
+        possibly aborting a currently running report.  The
+        new value is used as the requested duration of this
+        report and is immediately loaded into the associated
+        alMatrixTopNControlDuration object.
+
+        When the report finishes, the probe will automatically
+        start another collection with the same initial value
+        of alMatrixTopNControlTimeRemaining.  Thus, the management
+        station may simply read the resulting reports repeatedly,
+        checking the startTime and duration each time to ensure that a
+        report was not missed or that the report parameters were not
+        changed.
+
+        While the value of this object is non-zero, it decrements
+        by one per second until it reaches zero.  At the time
+
+        that this object decrements to zero, the report is made
+        accessible in the alMatrixTopNTable, overwriting any report
+        that may be there.
+
+        When this object is modified by the management station, any
+        associated entries in the alMatrixTopNTable shall be deleted.
+
+        (Note that this is a different algorithm than the one used
+        in the hostTopNTable)."
+    DEFVAL { 1800 }
+    ::= { alMatrixTopNControlEntry 4 }
+
+alMatrixTopNControlGeneratedReports OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of reports that have been generated by this entry."
+    ::= { alMatrixTopNControlEntry 5 }
+
+alMatrixTopNControlDuration OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of seconds that this report has collected
+        during the last sampling interval.
+
+        When the associated alMatrixTopNControlTimeRemaining object
+        is set, this object shall be set by the probe to the
+        same value and shall not be modified until the next
+        time the alMatrixTopNControlTimeRemaining is set.
+
+        This value shall be zero if no reports have been
+        requested for this alMatrixTopNControlEntry."
+    ::= { alMatrixTopNControlEntry 6 }
+
+alMatrixTopNControlRequestedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of matrix entries requested for this report.
+
+        When this object is created or modified, the probe
+        should set alMatrixTopNControlGrantedSize as closely to this
+        object as possible for the particular probe
+        implementation and available resources."
+    DEFVAL { 150 }
+    ::= { alMatrixTopNControlEntry 7 }
+
+alMatrixTopNControlGrantedSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of matrix entries in this report.
+
+        When the associated alMatrixTopNControlRequestedSize object
+        is created or modified, the probe should set this
+        object as closely to the requested value as
+        possible for the particular implementation and
+        available resources. The probe must not lower this
+        value except as a side-effect of a set to the associated
+        alMatrixTopNControlRequestedSize object.
+
+        If the value of alMatrixTopNControlRateBase is equal to
+        alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, when the
+        next topN report is generated, matrix entries with the highest
+        value of alMatrixTopNPktRate shall be placed in this table in
+        decreasing order of this rate until there is no more room or
+        until there are no more matrix entries.
+
+        If the value of alMatrixTopNControlRateBase is equal to
+        alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the
+        next topN report is generated, matrix entries with the highest
+        value of alMatrixTopNOctetRate shall be placed in this table
+        in decreasing order of this rate until there is no more room
+        or until there are no more matrix entries.
+
+        It is an implementation-specific matter how entries with the
+        same value of alMatrixTopNPktRate or alMatrixTopNOctetRate are
+        sorted.  It is also an implementation-specific matter as to
+        whether zero-valued entries are available."
+    ::= { alMatrixTopNControlEntry 8 }
+
+alMatrixTopNControlStartTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this topN report was
+        last started.  In other words, this is the time that
+        the associated alMatrixTopNControlTimeRemaining object
+        was modified to start the requested report or the time
+        the report was last automatically (re)started.
+
+        This object may be used by the management station to
+        determine whether a report was missed."
+    ::= { alMatrixTopNControlEntry 9 }
+
+alMatrixTopNControlOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { alMatrixTopNControlEntry 10 }
+
+alMatrixTopNControlStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "The status of this alMatrixTopNControlEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all
+        associated entries in the alMatrixTopNTable shall be
+        deleted by the agent."
+    ::= { alMatrixTopNControlEntry 11 }
+
+alMatrixTopNTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF AlMatrixTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A set of statistics for those application-layer matrix
+        entries that have counted the highest number of octets or
+        packets."
+    ::= { alMatrix 4 }
+
+alMatrixTopNEntry OBJECT-TYPE
+    SYNTAX     AlMatrixTopNEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A conceptual row in the alMatrixTopNTable.
+
+        The alMatrixTopNControlIndex value in the index identifies
+        the alMatrixTopNControlEntry on whose behalf this entry was
+        created.
+
+        An example of the indexing of this table is
+        alMatrixTopNPktRate.3.10"
+    INDEX { alMatrixTopNControlIndex, alMatrixTopNIndex }
+    ::= { alMatrixTopNTable 1 }
+
+AlMatrixTopNEntry ::= SEQUENCE {
+    alMatrixTopNIndex                      Integer32,
+    alMatrixTopNProtocolDirLocalIndex      Integer32,
+    alMatrixTopNSourceAddress              OCTET STRING,
+    alMatrixTopNDestAddress                OCTET STRING,
+    alMatrixTopNAppProtocolDirLocalIndex   Integer32,
+    alMatrixTopNPktRate                    Gauge32,
+    alMatrixTopNReversePktRate             Gauge32,
+    alMatrixTopNOctetRate                  Gauge32,
+    alMatrixTopNReverseOctetRate           Gauge32
+  }
+
+alMatrixTopNIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in
+        the alMatrixTopNTable among those in the same report.
+
+        This index is between 1 and N, where N is the
+        number of entries in this report.
+
+        If the value of alMatrixTopNControlRateBase is equal to
+        alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, increasing
+        values of alMatrixTopNIndex shall be assigned to entries with
+        decreasing values of alMatrixTopNPktRate until index N is
+        assigned or there are no more alMatrixTopNEntries.
+
+        If the value of alMatrixTopNControlRateBase is equal to
+        alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets,
+        increasing values of alMatrixTopNIndex shall be assigned to
+        entries with decreasing values of alMatrixTopNOctetRate until
+        index N is assigned or there are no more alMatrixTopNEntries."
+    ::= { alMatrixTopNEntry 1 }
+
+alMatrixTopNProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The protocolDirLocalIndex of the network-layer protocol of
+        this entry's network address."
+    ::= { alMatrixTopNEntry 2 }
+
+alMatrixTopNSourceAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network-layer address of the source host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated alMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the alMatrixTopNProtocolDirLocalIndex
+        indicates an encapsulation of IP, this object is encoded as a
+        length octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { alMatrixTopNEntry 3 }
+
+alMatrixTopNDestAddress OBJECT-TYPE
+    SYNTAX     OCTET STRING  (SIZE (1..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The network-layer address of the destination host in this
+        conversation.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the associated alMatrixTopNProtocolDirLocalIndex.
+
+        For example, if the alMatrixTopNProtocolDirLocalIndex
+        indicates an encapsulation of IP, this object is encoded as a
+        length octet of 4, followed by the 4 octets of the IP address,
+        in network byte order."
+    ::= { alMatrixTopNEntry 4 }
+
+alMatrixTopNAppProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of the protocol counted by this matrix entry."
+    ::= { alMatrixTopNEntry 5 }
+
+alMatrixTopNPktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the source
+        host to the destination host during this sampling interval,
+        counted using the rules for counting the alMatrixSDPkts
+        object.
+
+        If the value of alMatrixTopNControlRateBase is
+        alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, this
+        variable will be used to sort this report."
+    ::= { alMatrixTopNEntry 6 }
+
+alMatrixTopNReversePktRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of packets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, counted using the rules for counting the
+        alMatrixDSPkts object.  (Note that the corresponding
+        alMatrixSDPkts object selected is the one whose source address
+        is equal to alMatrixTopNDestAddress and whose destination
+        address is equal to alMatrixTopNSourceAddress.)
+
+        Note that if the value of alMatrixTopNControlRateBase is equal
+        to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, the sort
+        of topN entries is based entirely on alMatrixTopNPktRate, and
+        not on the value of this object."
+    ::= { alMatrixTopNEntry 7 }
+
+alMatrixTopNOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the source
+        host to the destination host during this sampling interval,
+        counted using the rules for counting the alMatrixSDOctets
+        object.
+
+        If the value of alMatrixTopNControlRateBase is
+        alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, this
+        variable will be used to sort this report."
+    ::= { alMatrixTopNEntry 8 }
+
+alMatrixTopNReverseOctetRate OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of octets seen of this protocol from the
+        destination host to the source host during this sampling
+        interval, counted using the rules for counting the
+        alMatrixDSOctets object.  (Note that the corresponding
+        alMatrixSDOctets object selected is the one whose source
+        address is equal to alMatrixTopNDestAddress and whose
+        destination address is equal to alMatrixTopNSourceAddress.)
+
+        Note that if the value of alMatrixTopNControlRateBase is equal
+        to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, the
+        sort of topN entries is based entirely on
+        alMatrixTopNOctetRate, and not on the value of this object."
+    ::= { alMatrixTopNEntry 9 }
+
+--
+-- User History Collection Group (usrHistory)
+--
+-- The usrHistory group combines mechanisms seen in the alarm and
+-- history groups to provide user-specified history collection,
+-- utilizing two additional control tables and one additional data
+-- table.  This function has traditionally been done by NMS
+-- applications, via periodic polling.  The usrHistory group allows
+-- this task to be offloaded to an RMON probe.
+--
+-- Data (an ASN.1 INTEGER based object) is collected in the same
+-- manner as any history data table (e.g., etherHistoryTable) except
+-- that the user specifies the MIB instances to be collected.  Objects
+-- are collected in bucket-groups, with the intent that all MIB
+-- instances in the same bucket-group are collected as atomically as
+-- possible by the RMON probe.
+--
+-- The usrHistoryControlTable is a one-dimensional read-create table.
+-- Each row configures a collection of user history buckets, much
+-- the same as a historyControlEntry, except that the creation of a
+-- row in this table will cause one or more associated instances in
+-- the usrHistoryObjectTable to be created.  The user specifies the
+-- number of bucket elements (rows in the usrHistoryObjectTable)
+-- requested, as well as the number of buckets requested.
+--
+-- The usrHistoryObjectTable is a 2-d read-write table.
+-- Each row configures a single MIB instance to be collected.
+-- All rows with the same major index constitute a bucket-group.
+--
+-- The usrHistoryTable is a 3-d read-only table containing
+
+-- the data of associated usrHistoryControlEntries.  Each
+-- entry represents the value of a single MIB instance
+-- during a specific sampling interval (or the rate of
+-- change during the interval).
+--
+-- A sample value is stored in two objects - an absolute value and
+-- a status object.  This allows numbers from -(2G-1) to +4G to be
+-- stored.  The status object also indicates whether a sample is
+-- valid.  This allows data collection to continue if periodic
+-- retrieval of a particular instance fails for any reason.
+--
+-- Row Creation Order Relationships
+--
+-- The static nature of the usrHistoryObjectTable creates
+-- some row creation/modification issues.  The rows in this
+-- table need to be set before the associated
+-- usrHistoryControlEntry can be activated.
+--
+-- Note that the usrHistoryObject entries associated with a
+-- particular usrHistoryControlEntry are not required to
+-- be active before the control entry is activated.  However,
+-- the usrHistory data entries associated with an inactive
+-- usrHistoryObject entry will be inactive (i.e.,
+-- usrHistoryValStatus == valueNotAvailable).
+--
+
+usrHistoryControlTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UsrHistoryControlEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of data-collection configuration entries."
+    ::= { usrHistory 1 }
+
+usrHistoryControlEntry OBJECT-TYPE
+    SYNTAX UsrHistoryControlEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of parameters that set up a group of user-defined
+        MIB objects to be sampled periodically (called a
+        bucket-group).
+
+        For example, an instance of usrHistoryControlInterval
+        might be named usrHistoryControlInterval.1"
+    INDEX { usrHistoryControlIndex }
+    ::= { usrHistoryControlTable 1 }
+
+UsrHistoryControlEntry ::= SEQUENCE {
+    usrHistoryControlIndex             Integer32,
+    usrHistoryControlObjects           Integer32,
+    usrHistoryControlBucketsRequested  Integer32,
+    usrHistoryControlBucketsGranted    Integer32,
+    usrHistoryControlInterval          Integer32,
+    usrHistoryControlOwner             OwnerString,
+    usrHistoryControlStatus            RowStatus
+}
+
+usrHistoryControlIndex OBJECT-TYPE
+    SYNTAX Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        usrHistoryControlTable.  Each such entry defines a
+        set of samples at a particular interval for a specified
+        set of MIB instances available from the managed system."
+    ::= { usrHistoryControlEntry 1 }
+
+usrHistoryControlObjects OBJECT-TYPE
+    SYNTAX Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The number of MIB objects to be collected
+        in the portion of usrHistoryTable associated with this
+        usrHistoryControlEntry.
+
+        This object may not be modified if the associated instance
+        of usrHistoryControlStatus is equal to active(1)."
+    ::= { usrHistoryControlEntry 2 }
+
+usrHistoryControlBucketsRequested OBJECT-TYPE
+    SYNTAX Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The requested number of discrete time intervals
+        over which data is to be saved in the part of the
+        usrHistoryTable associated with this usrHistoryControlEntry.
+
+        When this object is created or modified, the probe
+        should set usrHistoryControlBucketsGranted as closely to
+        this object as possible for the particular probe
+        implementation and available resources."
+    DEFVAL { 50 }
+    ::= { usrHistoryControlEntry 3 }
+
+usrHistoryControlBucketsGranted OBJECT-TYPE
+    SYNTAX Integer32 (1..65535)
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of discrete sampling intervals
+        over which data shall be saved in the part of
+        the usrHistoryTable associated with this
+        usrHistoryControlEntry.
+
+        When the associated usrHistoryControlBucketsRequested
+        object is created or modified, the probe should set
+        this object as closely to the requested value as
+        possible for the particular probe implementation and
+        available resources.  The probe must not lower this
+        value except as a result of a modification to the associated
+        usrHistoryControlBucketsRequested object.
+
+        The associated usrHistoryControlBucketsRequested object
+        should be set before or at the same time as this object
+        to allow the probe to accurately estimate the resources
+        required for this usrHistoryControlEntry.
+
+        There will be times when the actual number of buckets
+        associated with this entry is less than the value of
+        this object.  In this case, at the end of each sampling
+        interval, a new bucket will be added to the usrHistoryTable.
+
+        When the number of buckets reaches the value of this object
+        and a new bucket is to be added to the usrHistoryTable,
+        the oldest bucket associated with this usrHistoryControlEntry
+        shall be deleted by the agent so that the new bucket can be
+        added.
+
+        When the value of this object changes to a value less than
+        the current value, entries are deleted from the
+        usrHistoryTable associated with this usrHistoryControlEntry.
+        Enough of the oldest of these entries shall be deleted by the
+        agent so that their number remains less than or equal to the
+        new value of this object.
+
+        When the value of this object changes to a value greater
+        than the current value, the number of associated usrHistory
+        entries may be allowed to grow."
+    ::= { usrHistoryControlEntry 4 }
+
+usrHistoryControlInterval OBJECT-TYPE
+    SYNTAX Integer32 (1..2147483647)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The interval in seconds over which the data is
+        sampled for each bucket in the part of the usrHistory
+        table associated with this usrHistoryControlEntry.
+
+        Because the counters in a bucket may overflow at their
+        maximum value with no indication, a prudent manager will
+        take into account the possibility of overflow in any of
+        the associated counters.  It is important to consider the
+        minimum time in which any counter could overflow on a
+        particular media type and to set the usrHistoryControlInterval
+        object to a value less than this interval.
+
+        This object may not be modified if the associated
+        usrHistoryControlStatus object is equal to active(1)."
+    DEFVAL { 1800 }
+    ::= { usrHistoryControlEntry 5 }
+
+usrHistoryControlOwner OBJECT-TYPE
+    SYNTAX OwnerString
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { usrHistoryControlEntry 6 }
+
+usrHistoryControlStatus OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The status of this variable history control entry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        If this object is not equal to active(1), all associated
+        entries in the usrHistoryTable shall be deleted."
+    ::= { usrHistoryControlEntry 7 }
+
+-- Object table
+
+usrHistoryObjectTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UsrHistoryObjectEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of data-collection configuration entries."
+    ::= { usrHistory 2 }
+
+usrHistoryObjectEntry OBJECT-TYPE
+    SYNTAX UsrHistoryObjectEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of MIB instances to be sampled periodically.
+
+        Entries in this table are created when an associated
+        usrHistoryControlObjects object is created.
+
+        The usrHistoryControlIndex value in the index is
+        that of the associated usrHistoryControlEntry.
+
+        For example, an instance of usrHistoryObjectVariable might be
+        usrHistoryObjectVariable.1.3"
+    INDEX { usrHistoryControlIndex, usrHistoryObjectIndex }
+    ::= { usrHistoryObjectTable 1 }
+
+UsrHistoryObjectEntry ::= SEQUENCE {
+    usrHistoryObjectIndex             Integer32,
+    usrHistoryObjectVariable          OBJECT IDENTIFIER,
+    usrHistoryObjectSampleType        INTEGER
+}
+
+usrHistoryObjectIndex OBJECT-TYPE
+    SYNTAX Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "An index used to uniquely identify an entry in the
+        usrHistoryObject table.  Each such entry defines a
+        MIB instance to be collected periodically."
+    ::= { usrHistoryObjectEntry 1 }
+
+usrHistoryObjectVariable OBJECT-TYPE
+    SYNTAX OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The object identifier of the particular variable to be
+
+        sampled.
+
+        Only variables that resolve to an ASN.1 primitive type of
+        Integer32 (Integer32, Counter, Gauge, or TimeTicks) may be
+        sampled.
+
+        Because SNMP access control is articulated entirely in terms
+        of the contents of MIB views, no access control mechanism
+        exists that can restrict the value of this object to identify
+        only those objects that exist in a particular MIB view.
+        Because there is thus no acceptable means of restricting the
+        read access that could be obtained through the user history
+        mechanism, the probe must only grant write access to this
+        object in those views that have read access to all objects on
+        the probe.  See USM [RFC3414] and VACM [RFC3415] for more
+        information.
+
+        During a set operation, if the supplied variable name is not
+        available in the selected MIB view, a badValue error must be
+        returned.
+
+        This object may not be modified if the associated
+        usrHistoryControlStatus object is equal to active(1)."
+    ::= { usrHistoryObjectEntry 2 }
+
+usrHistoryObjectSampleType OBJECT-TYPE
+    SYNTAX INTEGER {
+               absoluteValue(1),
+               deltaValue(2)
+           }
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The method of sampling the selected variable for storage in
+        the usrHistoryTable.
+
+        If the value of this object is absoluteValue(1), the value of
+        the selected variable will be copied directly into the history
+        bucket.
+
+        If the value of this object is deltaValue(2), the value of the
+        selected variable at the last sample will be subtracted from
+        the current value, and the difference will be stored in the
+        history bucket.  If the associated usrHistoryObjectVariable
+        instance could not be obtained at the previous sample
+        interval, then a delta sample is not possible, and the value
+        of the associated usrHistoryValStatus object for this interval
+        will be valueNotAvailable(1).
+
+        This object may not be modified if the associated
+        usrHistoryControlStatus object is equal to active(1)."
+    ::= { usrHistoryObjectEntry 3 }
+
+-- data table
+
+usrHistoryTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UsrHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of user-defined history entries."
+    ::= { usrHistory 3 }
+
+usrHistoryEntry OBJECT-TYPE
+    SYNTAX UsrHistoryEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A historical sample of user-defined variables.  This sample
+        is associated with the usrHistoryControlEntry that set up the
+        parameters for a regular collection of these samples.
+
+        The usrHistoryControlIndex value in the index identifies the
+        usrHistoryControlEntry on whose behalf this entry was created.
+        The usrHistoryObjectIndex value in the index identifies the
+        usrHistoryObjectEntry on whose behalf this entry was created.
+
+        For example, an instance of usrHistoryAbsValue, which represents
+        the 14th sample of a variable collected as specified by
+        usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5,
+        would be named usrHistoryAbsValue.1.14.5"
+    INDEX { usrHistoryControlIndex, usrHistorySampleIndex,
+            usrHistoryObjectIndex }
+    ::= { usrHistoryTable 1 }
+
+UsrHistoryEntry ::= SEQUENCE {
+    usrHistorySampleIndex   Integer32,
+    usrHistoryIntervalStart TimeStamp,
+    usrHistoryIntervalEnd   TimeStamp,
+    usrHistoryAbsValue      Gauge32,
+    usrHistoryValStatus     INTEGER
+}
+
+usrHistorySampleIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An index that uniquely identifies the particular sample this
+        entry represents among all samples associated with the same
+        usrHistoryControlEntry.  This index starts at 1 and increases
+        by one as each new sample is taken."
+    ::= { usrHistoryEntry 1 }
+
+usrHistoryIntervalStart OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the start of the interval over
+        which this sample was measured.  If the probe keeps track of
+        the time of day, it should start the first sample of the
+        history at a time such that when the next hour of the day
+        begins, a sample is started at that instant.
+
+        Note that following this rule may require that the probe delay
+        collecting the first sample of the history, as each sample
+        must be of the same interval.  Also note that the sample that
+        is currently being collected is not accessible in this table
+        until the end of its interval."
+    ::= { usrHistoryEntry 2 }
+
+usrHistoryIntervalEnd OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the end of the interval over which
+        this sample was measured."
+    ::= { usrHistoryEntry 3 }
+
+usrHistoryAbsValue OBJECT-TYPE
+    SYNTAX Gauge32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The absolute value (i.e., unsigned value) of the
+        user-specified statistic during the last sampling period.  The
+        value during the current sampling period is not made available
+        until the period is completed.
+
+        To obtain the true value for this sampling interval, the
+        associated instance of usrHistoryValStatus must be checked,
+        and usrHistoryAbsValue adjusted as necessary.
+
+        If the MIB instance could not be accessed during the sampling
+        interval, then this object will have a value of zero, and the
+        associated instance of usrHistoryValStatus will be set to
+        'valueNotAvailable(1)'.
+
+        The access control check prescribed in the definition of
+        usrHistoryObjectVariable SHOULD be checked for each sampling
+        interval.  If this check determines that access should not be
+        allowed, then this object will have a value of zero, and the
+        associated instance of usrHistoryValStatus will be set to
+        'valueNotAvailable(1)'."
+    ::= { usrHistoryEntry 4 }
+
+usrHistoryValStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        valueNotAvailable(1),
+        valuePositive(2),
+        valueNegative(3)
+    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This object indicates the validity and sign of the data in
+        the associated instance of usrHistoryAbsValue.
+
+        If the MIB instance could not be accessed during the sampling
+        interval, then 'valueNotAvailable(1)' will be returned.
+
+        If the sample is valid and the actual value of the sample is
+        greater than or equal to zero, then 'valuePositive(2)' is
+        returned.
+
+        If the sample is valid and the actual value of the sample is
+        less than zero, 'valueNegative(3)' will be returned.  The
+        associated instance of usrHistoryAbsValue should be multiplied
+        by -1 to obtain the true sample value."
+    ::= { usrHistoryEntry 5 }
+
+-- The Probe Configuration Group
+--
+-- This group controls the configuration of various operating
+-- parameters of the probe.
+
+ControlString ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This data type is used to communicate with a modem or a
+
+        serial data switch.  A ControlString contains embedded
+        commands to control how the device will interact with the
+        remote device through the serial interface.  Commands are
+        represented as two-character sequences beginning with
+        the '^' character.
+
+        The following commands are recognized by the device (note
+        that command characters are case sensitive):
+
+           ^s  Send string that follows, which is terminated by the
+               next command or the end of string.
+           ^c  Delay for the number of seconds that follows.  Toss
+               out any data received rather than store it in a
+               buffer for parsing.
+           ^t  Set timeout to the value represented by the decimal
+               digits that follow.  The default timeout is 20
+               seconds.  Note that this timeout may be overridden
+               by a smaller serialTimeout configured for the
+               associated serial interface (see serialConfigTable).
+           ^w  Wait for the reply string that follows, which is
+               terminated by the next command or the end of string.
+               Partial and case-insensitive matching is applied, i.e.,
+               if the reply string (any case combination) is found
+               anywhere in the received string, then the a match is
+               found.  If the current timeout elapses without a match,
+               then the remaining control string is ignored.
+           ^!  The ^ character.
+           ^d  Delay the number of seconds specified by the decimal
+               digits that follow.
+           ^b  Send break for the number of milliseconds specified by
+               the decimal digits that follow.  If no digits follow,
+               break will be enforced for 250 milliseconds by default.
+
+        The following ASCII control characters may be inserted into
+        the '^s' send string or the '^w' reply string:
+
+           ^@    0x00
+           ^A    0x01
+            ..
+           ^M    0x0D
+            ..
+           ^Z    0x1A
+           ^[    0x1B
+           ^    0x1C
+           ^]    0x1D
+           ^^    0x1E
+           ^_    0x1F
+
+        Binary data may also be inserted into the data stream.  The
+        control sequence for each byte of binary data is ^0x##, where
+        ## is the hexadecimal representation of the data byte.  Two
+        ASCII characters (0-9, a-f, A-F) must follow the '^0x'
+        control prefix.  For example, '^0x0D^0x0A' is interpreted as a
+        carriage return followed by a line feed."
+    SYNTAX OCTET STRING (SIZE (0..255))
+
+probeCapabilities OBJECT-TYPE
+    SYNTAX BITS {
+        etherStats(0),
+        historyControl(1),
+        etherHistory(2),
+        alarm(3),
+        hosts(4),
+        hostTopN(5),
+        matrix(6),
+        filter(7),
+        capture(8),
+        event(9),
+        tokenRingMLStats(10),
+        tokenRingPStats(11),
+        tokenRingMLHistory(12),
+        tokenRingPHistory(13),
+        ringStation(14),
+        ringStationOrder(15),
+        ringStationConfig(16),
+        sourceRouting(17),
+        protocolDirectory(18),
+        protocolDistribution(19),
+        addressMapping(20),
+        nlHost(21),
+        nlMatrix(22),
+        alHost(23),
+        alMatrix(24),
+        usrHistory(25),
+        probeConfig(26)
+    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "An indication of the RMON MIB groups supported
+        on at least one interface by this probe."
+    ::= { probeConfig 1 }
+
+probeSoftwareRev  OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(0..15))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The software revision of this device.  This string will have
+        a zero length if the revision is unknown."
+    ::= { probeConfig 2 }
+
+probeHardwareRev  OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(0..31))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The hardware revision of this device.  This string will have
+        a zero length if the revision is unknown."
+    ::= { probeConfig 3 }
+
+probeDateTime  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (0 | 8 | 11))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Probe's current date and time.
+
+         field  octets  contents                  range
+         -----  ------  --------                  -----
+           1      1-2   year                      0..65536
+           2       3    month                     1..12
+           3       4    day                       1..31
+           4       5    hour                      0..23
+           5       6    minutes                   0..59
+           6       7    seconds                   0..60
+                         (use 60 for leap-second)
+           7       8    deci-seconds              0..9
+           8       9    direction from UTC        '+' / '-'
+           9      10    hours from UTC            0..11
+          10      11    minutes from UTC          0..59
+
+         For example, Tuesday May 26, 1992 at 1:30:15 PM
+         EDT would be displayed as:
+
+                     1992-5-26,13:30:15.0,-4:0
+
+         Note that if only local time is known, then
+         time zone information (fields 8-10) is not
+         present, and that if no time information is known, the
+         null string is returned."
+    ::= { probeConfig 4 }
+
+probeResetControl  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    running(1),
+                    warmBoot(2),
+                    coldBoot(3)
+              }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "Setting this object to warmBoot(2) causes the device to
+        restart the application software with current configuration
+        parameters saved in non-volatile memory.  Setting this
+        object to coldBoot(3) causes the device to reinitialize
+        configuration parameters in non-volatile memory to default
+        values and to restart the application software.  When the device
+        is running normally, this variable has a value of
+        running(1)."
+    ::= { probeConfig 5 }
+
+-- The following download objects do not restrict an implementation
+-- from implementing additional download mechanisms (controlled in an
+-- implementation-specific manner).  Further, in the case where the RMON
+-- agent shares a processor with other types of systems, the
+-- implementation is not required to download those non-RMON functions
+-- with this mechanism.
+
+probeDownloadFile  OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(0..127))
+    MAX-ACCESS read-write
+    STATUS     deprecated
+    DESCRIPTION
+        "The file name to be downloaded from the TFTP server when a
+        download is next requested via this MIB.  This value is set to
+        the zero-length string when no file name has been specified.
+
+        This object has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability to
+        meet the requirements of a Draft Standard."
+    ::= { probeConfig 6 }
+
+probeDownloadTFTPServer  OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-write
+    STATUS     deprecated
+    DESCRIPTION
+        "The IP address of the TFTP server that contains the boot
+        image to load when a download is next requested via this MIB.
+        This value is set to '0.0.0.0' when no IP address has been
+
+        specified.
+
+        This object has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability to
+        meet the requirements of a Draft Standard."
+    ::= { probeConfig 7 }
+
+probeDownloadAction  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                  notDownloading(1),
+                  downloadToPROM(2),
+                  downloadToRAM(3)
+               }
+    MAX-ACCESS read-write
+    STATUS     deprecated
+    DESCRIPTION
+        "When this object is set to downloadToRAM(3) or
+        downloadToPROM(2), the device will discontinue its
+        normal operation and begin download of the image specified
+        by probeDownloadFile from the server specified by
+        probeDownloadTFTPServer using the TFTP protocol.  If
+        downloadToRAM(3) is specified, the new image is copied
+        to RAM only (the old image remains unaltered in the flash
+        EPROM).  If downloadToPROM(2) is specified,
+        the new image is written to the flash EPROM
+        memory after its checksum has been verified to be correct.
+        When the download process is completed, the device will
+        warm boot to restart the newly loaded application.
+        When the device is not downloading, this object will have
+        a value of notDownloading(1).
+
+        This object has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability to
+        meet the requirements of a Draft Standard."
+    ::= { probeConfig 8 }
+
+probeDownloadStatus  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    downloadSuccess(1),
+                    downloadStatusUnknown(2),
+                    downloadGeneralError(3),
+                    downloadNoResponseFromServer(4),
+                    downloadChecksumError(5),
+                    downloadIncompatibleImage(6),
+                    downloadTftpFileNotFound(7),
+                    downloadTftpAccessViolation(8)
+               }
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+        "The status of the last download procedure, if any.  This
+        object will have a value of downloadStatusUnknown(2) if no
+        download process has been performed.
+
+        This object has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability to
+        meet the requirements of a Draft Standard."
+    ::= { probeConfig 9 }
+
+serialConfigTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SerialConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A table of serial interface configuration entries.  This data
+        will be stored in non-volatile memory and preserved across
+        probe resets or power loss.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability to
+        meet the requirements of a Draft Standard."
+    ::= { probeConfig 10 }
+
+serialConfigEntry  OBJECT-TYPE
+    SYNTAX     SerialConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A set of configuration parameters for a particular
+        serial interface on this device.  If the device has no serial
+        interfaces, this table is empty.
+
+        The index is composed of the ifIndex assigned to this serial
+        line interface."
+    INDEX  { ifIndex }
+    ::= { serialConfigTable 1 }
+
+SerialConfigEntry ::= SEQUENCE {
+    serialMode                   INTEGER,
+    serialProtocol               INTEGER,
+    serialTimeout                Integer32,
+    serialModemInitString        ControlString,
+    serialModemHangUpString      ControlString,
+    serialModemConnectResp       DisplayString,
+    serialModemNoConnectResp     DisplayString,
+    serialDialoutTimeout         Integer32,
+    serialStatus                 RowStatus
+}
+
+serialMode  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   direct(1),
+                   modem(2)
+               }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The type of incoming connection to be expected on this
+         serial interface."
+    DEFVAL { direct }
+    ::= { serialConfigEntry 1 }
+
+serialProtocol  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   slip(2),
+                   ppp(3)
+               }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The type of data link encapsulation to be used on this
+        serial interface."
+    DEFVAL { slip }
+    ::= { serialConfigEntry 2 }
+
+serialTimeout  OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "This timeout value is used when the Management Station has
+        initiated the conversation over the serial link.  This variable
+        represents the number of seconds of inactivity allowed before
+        terminating the connection on this serial interface.  Use the
+        serialDialoutTimeout in the case where the probe has initiated
+        the connection for the purpose of sending a trap."
+    DEFVAL { 300 }
+    ::= { serialConfigEntry 3 }
+
+serialModemInitString  OBJECT-TYPE
+    SYNTAX     ControlString (SIZE (0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A control string that controls how a modem attached to this
+        serial interface should be initialized.  The initialization
+        is performed once during startup and again after each
+        connection is terminated if the associated serialMode has the
+        value of modem(2).
+
+        A control string that is appropriate for a wide variety of
+        modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'."
+    ::= { serialConfigEntry 4 }
+
+serialModemHangUpString  OBJECT-TYPE
+    SYNTAX     ControlString (SIZE (0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A control string that specifies how to disconnect a modem
+         connection on this serial interface.  This object is only
+         meaningful if the associated serialMode has the value
+         of modem(2).
+
+         A control string that is appropriate for a wide variety of
+         modems is: '^d2^s+++^d2^sATH0^M^d2'."
+    ::= { serialConfigEntry 5 }
+
+serialModemConnectResp  OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "An ASCII string containing substrings that describe the
+        expected modem connection response code and associated bps
+        rate.  The substrings are delimited by the first character
+        in the string, for example:
+           /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/
+           CONNECT 4800/4800/CONNECT 9600/9600
+        will be interpreted as:
+            response code    bps rate
+            CONNECT            300
+            CONNECT 1200      1200
+            CONNECT 2400      2400
+            CONNECT 4800      4800
+            CONNECT 9600      9600
+        The agent will use the information in this string to adjust
+        the bps rate of this serial interface once a modem connection
+        is established.
+
+        A value that is appropriate for a wide variety of modems is:
+
+        '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/
+         CONNECT 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/
+        CONNECT 19200/19200/CONNECT 38400/38400/'."
+    ::= { serialConfigEntry 6 }
+
+serialModemNoConnectResp  OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "An ASCII string containing response codes that may be
+        generated by a modem to report the reason why a connection
+        attempt has failed.  The response codes are delimited by
+        the first character in the string, for example:
+           /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/
+
+        If one of these response codes is received via this serial
+        interface while attempting to make a modem connection,
+        the agent will issue the hang up command as specified by
+        serialModemHangUpString.
+
+        A value that is appropriate for a wide variety of modems is:
+        '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'."
+    ::= { serialConfigEntry 7 }
+
+serialDialoutTimeout  OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "This timeout value is used when the probe initiates the
+        serial connection with the intention of contacting a
+        management station.  This variable represents the number
+        of seconds of inactivity allowed before terminating the
+        connection on this serial interface."
+    DEFVAL { 20 }
+    ::= { serialConfigEntry 8 }
+
+serialStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The status of this serialConfigEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value."
+    ::= { serialConfigEntry 9 }
+
+netConfigTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF NetConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A table of netConfigEntries.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability to
+        meet the requirements of a Draft Standard."
+    ::= { probeConfig 11 }
+
+netConfigEntry  OBJECT-TYPE
+    SYNTAX     NetConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A set of configuration parameters for a particular
+        network interface on this device.  If the device has no network
+        interface, this table is empty.
+
+        The index is composed of the ifIndex assigned to the
+        corresponding interface."
+    INDEX  { ifIndex }
+    ::= { netConfigTable 1 }
+
+NetConfigEntry ::= SEQUENCE {
+    netConfigIPAddress         IpAddress,
+    netConfigSubnetMask        IpAddress,
+    netConfigStatus            RowStatus
+}
+
+netConfigIPAddress  OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The IP address of this Net interface.  The default value
+        for this object is 0.0.0.0.  If either the netConfigIPAddress
+        or netConfigSubnetMask is 0.0.0.0, then when the device
+        boots, it may use BOOTP to try to figure out what these
+        values should be.  If BOOTP fails before the device
+        can talk on the network, this value must be configured
+        (e.g., through a terminal attached to the device).  If BOOTP is
+        used, care should be taken to not send BOOTP broadcasts too
+        frequently and to eventually send them very infrequently if no
+        replies are received."
+    ::= { netConfigEntry 1 }
+
+netConfigSubnetMask  OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The subnet mask of this Net interface.  The default value
+        for this object is 0.0.0.0.  If either the netConfigIPAddress
+        or netConfigSubnetMask is 0.0.0.0, then when the device
+        boots, it may use BOOTP to try to figure out what these
+        values should be.  If BOOTP fails before the device
+        can talk on the network, this value must be configured
+        (e.g., through a terminal attached to the device).  If BOOTP is
+        used, care should be taken to not send BOOTP broadcasts too
+        frequently and to eventually send them very infrequently if no
+        replies are received."
+    ::= { netConfigEntry 2 }
+
+netConfigStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The status of this netConfigEntry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value."
+    ::= { netConfigEntry 3 }
+
+netDefaultGateway  OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-write
+    STATUS     deprecated
+    DESCRIPTION
+        "The IP Address of the default gateway.  If this value is
+        undefined or unknown, it shall have the value 0.0.0.0."
+    ::= { probeConfig 12 }
+
+-- Trap Destination Table
+--
+-- This table defines the destination addresses for traps generated
+-- from the device.  This table maps a community to one or more trap
+-- destination entries.
+--
+-- The same trap will be sent to all destinations specified in the
+-- entries that have the same trapDestCommunity as the eventCommunity
+-- (as defined by RMON MIB), as long as no access control mechanism
+-- (e.g., VACM) prohibits sending to one or more of the destinations.
+-- Information in this table will be stored in non-volatile memory.
+
+-- If the device has gone through a hard restart, this information
+-- will be reset to its default state.
+
+trapDestTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TrapDestEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A list of trap destination entries."
+    ::= { probeConfig 13 }
+
+trapDestEntry  OBJECT-TYPE
+    SYNTAX     TrapDestEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "This entry includes a destination IP address to which
+        traps are sent for this community."
+    INDEX { trapDestIndex }
+    ::= { trapDestTable 1 }
+
+TrapDestEntry ::= SEQUENCE {
+    trapDestIndex               Integer32,
+    trapDestCommunity           OCTET STRING,
+    trapDestProtocol            INTEGER,
+    trapDestAddress             OCTET STRING,
+    trapDestOwner               OwnerString,
+    trapDestStatus              RowStatus
+}
+
+trapDestIndex  OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A value that uniquely identifies this trapDestEntry."
+    ::= { trapDestEntry 1 }
+
+trapDestCommunity  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..127))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A community to which this destination address belongs.
+        This entry is associated with any eventEntries in the RMON
+        MIB whose value of eventCommunity is equal to the value of
+        this object.  Every time an associated event entry sends a
+        trap due to an event, that trap will be sent to each
+
+        address in the trapDestTable with a trapDestCommunity equal
+        to eventCommunity, as long as no access control mechanism
+        precludes it (e.g., VACM).
+
+        This object may not be modified if the associated
+        trapDestStatus object is equal to active(1)."
+    ::= { trapDestEntry 2 }
+
+trapDestProtocol OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    ip(1),
+                    ipx(2)
+                }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The protocol with which this trap is to be sent."
+    ::= { trapDestEntry 3 }
+
+trapDestAddress  OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The destination address for traps on behalf of this entry.
+
+        If the associated trapDestProtocol object is equal to ip(1),
+        the encoding of this object is the same as the snmpUDPAddress
+        textual convention in RFC 3417, 'Transport Mappings for the
+         Simple Network Management Protocol (SNMP)' [RFC3417]:
+          -- for a SnmpUDPAddress of length 6:
+          --
+          -- octets   contents        encoding
+          --  1-4     IP-address      network-byte order
+          --  5-6     UDP-port        network-byte order
+
+        If the associated trapDestProtocol object is equal to ipx(2),
+        the encoding of this object is the same as the snmpIPXAddress
+        textual convention in RFC 3417, 'Transport Mappings for the
+         Simple Network Management Protocol (SNMP)' [RFC3417]:
+          -- for a SnmpIPXAddress of length 12:
+          --
+          -- octets   contents            encoding
+          --  1-4     network-number      network-byte order
+          --  5-10    physical-address    network-byte order
+          -- 11-12    socket-number       network-byte order
+
+        This object may not be modified if the associated
+
+        trapDestStatus object is equal to active(1)."
+    ::= { trapDestEntry 4 }
+
+trapDestOwner  OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { trapDestEntry 5 }
+
+trapDestStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The status of this trap destination entry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value."
+    ::= { trapDestEntry 6 }
+
+-- Serial Connection Table
+--
+-- The device may communicate with a management station using
+-- SLIP.  In order for the device to send traps via SLIP, it must
+-- be able to initiate a connection over the serial interface.  The
+-- serialConnectionTable stores the parameters for such connection
+-- initiation.
+
+serialConnectionTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SerialConnectionEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A list of serialConnectionEntries.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability
+        to meet the requirements of a Draft Standard."
+    ::= { probeConfig 14 }
+
+serialConnectionEntry  OBJECT-TYPE
+    SYNTAX     SerialConnectionEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Configuration for a SLIP link over a serial line."
+    INDEX { serialConnectIndex }
+    ::= { serialConnectionTable 1 }
+
+SerialConnectionEntry ::= SEQUENCE {
+    serialConnectIndex                   Integer32,
+    serialConnectDestIpAddress           IpAddress,
+    serialConnectType                    INTEGER,
+    serialConnectDialString              ControlString,
+    serialConnectSwitchConnectSeq        ControlString,
+    serialConnectSwitchDisconnectSeq     ControlString,
+    serialConnectSwitchResetSeq          ControlString,
+    serialConnectOwner                   OwnerString,
+    serialConnectStatus                  RowStatus
+}
+
+serialConnectIndex  OBJECT-TYPE
+    SYNTAX     Integer32 (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "A value that uniquely identifies this serialConnection
+        entry."
+    ::= { serialConnectionEntry 1 }
+
+serialConnectDestIpAddress  OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The IP Address that can be reached at the other end of this
+        serial connection.
+
+        This object may not be modified if the associated
+        serialConnectStatus object is equal to active(1)."
+    ::= { serialConnectionEntry 2 }
+
+serialConnectType  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    direct(1),
+                    modem(2),
+                    switch(3),
+                    modemSwitch(4)
+               }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The type of outgoing connection to be made.  If this object
+        has the value direct(1), then a direct serial connection
+        is assumed.  If this object has the value modem(2),
+        then serialConnectDialString will be used to make a modem
+        connection.  If this object has the value switch(3),
+        then serialConnectSwitchConnectSeq will be used to establish
+        the connection over a serial data switch, and
+        serialConnectSwitchDisconnectSeq will be used to terminate
+        the connection.  If this object has the value
+        modem-switch(4), then a modem connection will be made first,
+        followed by the switch connection.
+
+        This object may not be modified if the associated
+        serialConnectStatus object is equal to active(1)."
+    DEFVAL { direct }
+    ::= { serialConnectionEntry 3 }
+
+serialConnectDialString  OBJECT-TYPE
+    SYNTAX     ControlString (SIZE(0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A control string that specifies how to dial the phone
+        number in order to establish a modem connection.  The
+        string should include the dialing prefix and suffix.  For
+        example: '^s^MATD9,888-1234^M' will instruct the Probe
+        to send a carriage return, followed by the dialing prefix
+        'ATD', the phone number '9,888-1234', and a carriage
+        return as the dialing suffix.
+
+        This object may not be modified if the associated
+        serialConnectStatus object is equal to active(1)."
+    ::= { serialConnectionEntry 4 }
+
+serialConnectSwitchConnectSeq  OBJECT-TYPE
+    SYNTAX     ControlString (SIZE(0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A control string that specifies how to establish a
+        data switch connection.
+
+        This object may not be modified if the associated
+        serialConnectStatus object is equal to active(1)."
+     ::= { serialConnectionEntry 5 }
+
+serialConnectSwitchDisconnectSeq  OBJECT-TYPE
+    SYNTAX     ControlString (SIZE(0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A control string that specifies how to terminate a
+        data switch connection.
+
+        This object may not be modified if the associated
+        serialConnectStatus object is equal to active(1)."
+    ::= { serialConnectionEntry 6 }
+
+serialConnectSwitchResetSeq  OBJECT-TYPE
+    SYNTAX     ControlString (SIZE(0..255))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "A control string that specifies how to reset a data
+        switch in the event of a timeout.
+
+        This object may not be modified if the associated
+        serialConnectStatus object is equal to active(1)."
+    ::= { serialConnectionEntry 7 }
+
+serialConnectOwner  OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it."
+    ::= { serialConnectionEntry 8 }
+
+serialConnectStatus  OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+        "The status of this serialConnectionEntry.
+
+        If the manager attempts to set this object to active(1) when
+        the serialConnectType is set to modem(2) or modem-switch(4)
+        and the serialConnectDialString is a zero-length string or
+        cannot be correctly parsed as a ConnectString, the set
+        request will be rejected with badValue(3).
+
+        If the manager attempts to set this object to active(1) when
+        the serialConnectType is set to switch(3) or modem-switch(4)
+        and the serialConnectSwitchConnectSeq,
+        the serialConnectSwitchDisconnectSeq, or
+
+        the serialConnectSwitchResetSeq is a zero-length string
+        or cannot be correctly parsed as a ConnectString, the set
+        request will be rejected with badValue(3).
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value."
+    ::= { serialConnectionEntry 9 }
+
+--
+-- Extensions to the RMON 1 MIB for RMON 2 devices
+--
+-- These extensions include the standard LastCreateTime Textual
+-- Convention for all control tables, as well as an augmentation of
+-- the filter entry that provides variable-length offsets into
+-- packets.
+
+-- Each of the following, except for filterDroppedFrames, is a
+-- read-only object which, if implemented, automatically appears when
+-- the RMON1 row it is associated with is created.
+
+etherStats2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF EtherStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    ::= { statistics 4 }
+
+etherStats2Entry  OBJECT-TYPE
+    SYNTAX     EtherStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { etherStatsEntry }
+    ::= { etherStats2Table 1 }
+
+EtherStats2Entry ::= SEQUENCE {
+    etherStatsDroppedFrames     Counter32,
+    etherStatsCreateTime        LastCreateTime
+}
+
+etherStatsDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { etherStats2Entry 1 }
+
+etherStatsCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { etherStats2Entry 2 }
+
+historyControl2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HistoryControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    ::= { history 5 }
+
+historyControl2Entry  OBJECT-TYPE
+    SYNTAX     HistoryControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { historyControlEntry }
+    ::= { historyControl2Table 1 }
+
+HistoryControl2Entry ::= SEQUENCE {
+    historyControlDroppedFrames Counter32
+}
+
+historyControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { historyControl2Entry 1 }
+
+hostControl2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HostControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    ::= { hosts 4 }
+
+hostControl2Entry  OBJECT-TYPE
+    SYNTAX     HostControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { hostControlEntry }
+    ::= { hostControl2Table 1 }
+
+HostControl2Entry ::= SEQUENCE {
+    hostControlDroppedFrames    Counter32,
+    hostControlCreateTime       LastCreateTime
+}
+
+hostControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { hostControl2Entry 1 }
+
+hostControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { hostControl2Entry 2 }
+
+matrixControl2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF MatrixControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    ::= { matrix 4 }
+
+matrixControl2Entry  OBJECT-TYPE
+    SYNTAX     MatrixControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { matrixControlEntry }
+    ::= { matrixControl2Table 1 }
+
+MatrixControl2Entry ::= SEQUENCE {
+    matrixControlDroppedFrames  Counter32,
+    matrixControlCreateTime     LastCreateTime
+}
+
+matrixControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { matrixControl2Entry 1 }
+
+matrixControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { matrixControl2Entry 2 }
+
+channel2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Channel2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    ::= { filter 3 }
+
+channel2Entry  OBJECT-TYPE
+    SYNTAX     Channel2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { channelEntry }
+    ::= { channel2Table 1 }
+
+Channel2Entry ::= SEQUENCE {
+    channelDroppedFrames    Counter32,
+    channelCreateTime       LastCreateTime
+}
+
+channelDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { channel2Entry 1 }
+
+channelCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { channel2Entry 2 }
+
+tokenRingMLStats2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TokenRingMLStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability
+        to meet the requirements of a Draft Standard."
+    ::= { statistics 5 }
+
+tokenRingMLStats2Entry  OBJECT-TYPE
+    SYNTAX     TokenRingMLStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { tokenRingMLStatsEntry }
+    ::= { tokenRingMLStats2Table 1 }
+
+TokenRingMLStats2Entry ::= SEQUENCE {
+    tokenRingMLStatsDroppedFrames       Counter32,
+    tokenRingMLStatsCreateTime          LastCreateTime
+}
+
+tokenRingMLStatsDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { tokenRingMLStats2Entry 1 }
+
+tokenRingMLStatsCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { tokenRingMLStats2Entry 2 }
+
+tokenRingPStats2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TokenRingPStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability
+        to meet the requirements of a Draft Standard."
+    ::= { statistics 6 }
+
+tokenRingPStats2Entry  OBJECT-TYPE
+    SYNTAX     TokenRingPStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS {  tokenRingPStatsEntry }
+    ::= { tokenRingPStats2Table 1 }
+
+TokenRingPStats2Entry ::= SEQUENCE {
+    tokenRingPStatsDroppedFrames    Counter32,
+    tokenRingPStatsCreateTime       LastCreateTime
+}
+
+tokenRingPStatsDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { tokenRingPStats2Entry 1 }
+
+tokenRingPStatsCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { tokenRingPStats2Entry 2 }
+
+ringStationControl2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF RingStationControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability
+        to meet the requirements of a Draft Standard."
+    ::= { tokenRing 7 }
+
+ringStationControl2Entry  OBJECT-TYPE
+    SYNTAX     RingStationControl2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { ringStationControlEntry }
+    ::= { ringStationControl2Table 1 }
+
+RingStationControl2Entry ::= SEQUENCE {
+    ringStationControlDroppedFrames Counter32,
+    ringStationControlCreateTime    LastCreateTime
+}
+
+ringStationControlDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { ringStationControl2Entry 1 }
+
+ringStationControlCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { ringStationControl2Entry 2 }
+
+sourceRoutingStats2Table  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SourceRoutingStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1.
+
+        This table has been deprecated, as it has not had enough
+        independent implementations to demonstrate interoperability
+        to meet the requirements of a Draft Standard."
+    ::= { tokenRing 8 }
+
+sourceRoutingStats2Entry  OBJECT-TYPE
+    SYNTAX     SourceRoutingStats2Entry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+        "Contains the RMON-2 augmentations to RMON-1."
+    AUGMENTS { sourceRoutingStatsEntry }
+    ::= { sourceRoutingStats2Table 1 }
+
+SourceRoutingStats2Entry ::= SEQUENCE {
+    sourceRoutingStatsDroppedFrames Counter32,
+    sourceRoutingStatsCreateTime    LastCreateTime
+}
+
+sourceRoutingStatsDroppedFrames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+       "The total number of frames that were received by the probe
+        and therefore not accounted for in the *StatsDropEvents, but
+        that the probe chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        probe is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { sourceRoutingStats2Entry 1 }
+
+sourceRoutingStatsCreateTime OBJECT-TYPE
+    SYNTAX     LastCreateTime
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+        "The value of sysUpTime when this control entry was last
+        activated.  This can be used by the management station to
+        ensure that the table has not been deleted and recreated
+        between polls."
+    ::= { sourceRoutingStats2Entry 2 }
+
+filter2Table OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Filter2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Provides a variable-length packet filter feature to the
+        RMON-1 filter table."
+    ::= { filter 4 }
+
+filter2Entry OBJECT-TYPE
+    SYNTAX     Filter2Entry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "Provides a variable-length packet filter feature to the
+        RMON-1 filter table."
+    AUGMENTS { filterEntry }
+    ::= { filter2Table 1 }
+
+Filter2Entry ::= SEQUENCE {
+    filterProtocolDirDataLocalIndex     Integer32,
+    filterProtocolDirLocalIndex         Integer32
+}
+
+filterProtocolDirDataLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "When this object is set to a non-zero value, the filter that
+        it is associated with performs the following operations on
+        every packet:
+
+        1) If the packet doesn't match the protocol directory entry
+           identified by this object, discard the packet and exit
+           (i.e., discard the packet if it is not of the identified
+           protocol).
+
+        2) If the associated filterProtocolDirLocalIndex is non-zero
+           and the packet doesn't match the protocol directory
+           entry identified by that object, discard the packet and
+           exit.
+        3) If the packet matches, perform the regular filter
+           algorithm as if the beginning of this named protocol is
+           the beginning of the packet, potentially applying the
+           filterOffset value to move further into the packet."
+    DEFVAL { 0 }
+    ::= { filter2Entry 1 }
+
+filterProtocolDirLocalIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "When this object is set to a non-zero value, the filter that
+        it is associated with will discard the packet if the packet
+        doesn't match this protocol directory entry."
+    DEFVAL { 0 }
+    ::= { filter2Entry 2 }
+
+-- Conformance Macros
+
+rmon2MIBCompliances OBJECT IDENTIFIER ::= { rmonConformance 1 }
+rmon2MIBGroups      OBJECT IDENTIFIER ::= { rmonConformance 2 }
+
+rmon2MIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the RMON2 MIB"
+    MODULE  -- this module
+        MANDATORY-GROUPS { protocolDirectoryGroup,
+                           protocolDistributionGroup,
+                           addressMapGroup,
+                           nlHostGroup,
+                           nlMatrixGroup,
+                           usrHistoryGroup,
+                           probeInformationGroup }
+
+        OBJECT nlMatrixTopNControlRateBase
+            SYNTAX      INTEGER {
+                          nlMatrixTopNPkts(1),
+                          nlMatrixTopNOctets(2)
+                        }
+            DESCRIPTION
+                "Conformance to RMON2 requires only support for these
+                values of nlMatrixTopNControlRateBase."
+
+        GROUP   rmon1EnhancementGroup
+            DESCRIPTION
+                "The rmon1EnhancementGroup is mandatory for systems
+                that implement RMON [RFC2819]."
+        GROUP  rmon1EthernetEnhancementGroup
+            DESCRIPTION
+                "The rmon1EthernetEnhancementGroup is optional and is
+                appropriate for systems that implement the Ethernet
+                group of RMON [RFC2819]."
+    ::= { rmon2MIBCompliances 1 }
+
+rmon2MIBApplicationLayerCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the RMON2 MIB with Application-Layer Enhancements."
+    MODULE  -- this module
+        MANDATORY-GROUPS { protocolDirectoryGroup,
+                           protocolDistributionGroup,
+                           addressMapGroup,
+                           nlHostGroup,
+                           nlMatrixGroup,
+                           alHostGroup,
+                           alMatrixGroup,
+                           usrHistoryGroup,
+                           probeInformationGroup }
+
+        OBJECT nlMatrixTopNControlRateBase
+            SYNTAX      INTEGER {
+                          nlMatrixTopNPkts(1),
+                          nlMatrixTopNOctets(2)
+                        }
+            DESCRIPTION
+                "Conformance to RMON2 requires only support for these
+                values of nlMatrixTopNControlRateBase."
+
+        OBJECT alMatrixTopNControlRateBase
+            SYNTAX     INTEGER {
+                           alMatrixTopNTerminalsPkts(1),
+                           alMatrixTopNTerminalsOctets(2),
+                           alMatrixTopNAllPkts(3),
+                           alMatrixTopNAllOctets(4)
+                       }
+            DESCRIPTION
+                "Conformance to RMON2 requires only support for these
+
+                values of alMatrixTopNControlRateBase."
+
+        GROUP   rmon1EnhancementGroup
+            DESCRIPTION
+                "The rmon1EnhancementGroup is mandatory for systems
+                that implement RMON [RFC2819]."
+        GROUP  rmon1EthernetEnhancementGroup
+            DESCRIPTION
+                "The rmon1EthernetEnhancementGroup is optional and is
+                appropriate for systems that implement the Ethernet
+                group of RMON [RFC2819]."
+    ::= { rmon2MIBCompliances 2 }
+
+protocolDirectoryGroup OBJECT-GROUP
+    OBJECTS { protocolDirLastChange,
+              protocolDirLocalIndex, protocolDirDescr,
+              protocolDirType, protocolDirAddressMapConfig,
+              protocolDirHostConfig, protocolDirMatrixConfig,
+              protocolDirOwner, protocolDirStatus }
+    STATUS  current
+    DESCRIPTION
+        "Lists the inventory of protocols the probe has the
+        capability of monitoring and allows the addition, deletion,
+        and configuration of entries in this list."
+    ::= { rmon2MIBGroups 1 }
+
+protocolDistributionGroup OBJECT-GROUP
+    OBJECTS { protocolDistControlDataSource,
+              protocolDistControlDroppedFrames,
+              protocolDistControlCreateTime,
+              protocolDistControlOwner, protocolDistControlStatus,
+              protocolDistStatsPkts, protocolDistStatsOctets }
+    STATUS  current
+    DESCRIPTION
+        "Collects the relative amounts of octets and packets for the
+        different protocols detected on a network segment."
+    ::= { rmon2MIBGroups 2 }
+
+addressMapGroup OBJECT-GROUP
+    OBJECTS { addressMapInserts, addressMapDeletes,
+              addressMapMaxDesiredEntries,
+              addressMapControlDataSource,
+              addressMapControlDroppedFrames,
+              addressMapControlOwner, addressMapControlStatus,
+              addressMapPhysicalAddress,
+              addressMapLastChange }
+    STATUS  current
+    DESCRIPTION
+        "Lists MAC address to network address bindings discovered by
+        the probe and what interface they were last seen on."
+    ::= { rmon2MIBGroups 3 }
+
+nlHostGroup OBJECT-GROUP
+    OBJECTS { hlHostControlDataSource,
+              hlHostControlNlDroppedFrames, hlHostControlNlInserts,
+              hlHostControlNlDeletes,
+              hlHostControlNlMaxDesiredEntries,
+              hlHostControlAlDroppedFrames, hlHostControlAlInserts,
+              hlHostControlAlDeletes,
+              hlHostControlAlMaxDesiredEntries, hlHostControlOwner,
+              hlHostControlStatus, nlHostInPkts, nlHostOutPkts,
+              nlHostInOctets, nlHostOutOctets,
+              nlHostOutMacNonUnicastPkts, nlHostCreateTime }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic sent from and to each network
+        address discovered by the probe.  Note that while the
+        hlHostControlTable also has objects that control an optional
+        alHostTable, implementation of the alHostTable is not
+        required to fully implement this group."
+    ::= { rmon2MIBGroups 4 }
+
+nlMatrixGroup OBJECT-GROUP
+    OBJECTS { hlMatrixControlDataSource,
+              hlMatrixControlNlDroppedFrames,
+              hlMatrixControlNlInserts, hlMatrixControlNlDeletes,
+              hlMatrixControlNlMaxDesiredEntries,
+              hlMatrixControlAlDroppedFrames,
+              hlMatrixControlAlInserts, hlMatrixControlAlDeletes,
+              hlMatrixControlAlMaxDesiredEntries,
+              hlMatrixControlOwner, hlMatrixControlStatus,
+              nlMatrixSDPkts, nlMatrixSDOctets, nlMatrixSDCreateTime,
+              nlMatrixDSPkts, nlMatrixDSOctets, nlMatrixDSCreateTime,
+              nlMatrixTopNControlMatrixIndex,
+              nlMatrixTopNControlRateBase,
+              nlMatrixTopNControlTimeRemaining,
+              nlMatrixTopNControlGeneratedReports,
+              nlMatrixTopNControlDuration,
+              nlMatrixTopNControlRequestedSize,
+              nlMatrixTopNControlGrantedSize,
+              nlMatrixTopNControlStartTime,
+              nlMatrixTopNControlOwner, nlMatrixTopNControlStatus,
+              nlMatrixTopNProtocolDirLocalIndex,
+              nlMatrixTopNSourceAddress, nlMatrixTopNDestAddress,
+              nlMatrixTopNPktRate, nlMatrixTopNReversePktRate,
+              nlMatrixTopNOctetRate, nlMatrixTopNReverseOctetRate }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic sent between each pair of
+        network addresses discovered by the probe.  Note that while
+        the hlMatrixControlTable also has objects that control
+        optional alMatrixTables, implementation of the
+        alMatrixTables is not required to fully implement this
+        group."
+     ::= { rmon2MIBGroups 5 }
+
+alHostGroup OBJECT-GROUP
+    OBJECTS { alHostInPkts, alHostOutPkts,
+              alHostInOctets, alHostOutOctets, alHostCreateTime }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic, by protocol, sent from and to
+        each network address discovered by the probe.  Implementation
+        of this group requires implementation of the Network-Layer
+        Host Group."
+    ::= { rmon2MIBGroups 6 }
+
+alMatrixGroup OBJECT-GROUP
+    OBJECTS { alMatrixSDPkts, alMatrixSDOctets, alMatrixSDCreateTime,
+              alMatrixDSPkts, alMatrixDSOctets, alMatrixDSCreateTime,
+              alMatrixTopNControlMatrixIndex,
+              alMatrixTopNControlRateBase,
+              alMatrixTopNControlTimeRemaining,
+              alMatrixTopNControlGeneratedReports,
+              alMatrixTopNControlDuration,
+              alMatrixTopNControlRequestedSize,
+              alMatrixTopNControlGrantedSize,
+              alMatrixTopNControlStartTime,
+              alMatrixTopNControlOwner, alMatrixTopNControlStatus,
+              alMatrixTopNProtocolDirLocalIndex,
+              alMatrixTopNSourceAddress, alMatrixTopNDestAddress,
+              alMatrixTopNAppProtocolDirLocalIndex,
+              alMatrixTopNPktRate, alMatrixTopNReversePktRate,
+              alMatrixTopNOctetRate, alMatrixTopNReverseOctetRate }
+    STATUS  current
+    DESCRIPTION
+        "Counts the amount of traffic, by protocol, sent between each
+        pair of network addresses discovered by the
+        probe.  Implementation of this group requires implementation
+        of the Network-Layer Matrix Group."
+    ::= { rmon2MIBGroups 7 }
+
+usrHistoryGroup OBJECT-GROUP
+
+    OBJECTS { usrHistoryControlObjects,
+              usrHistoryControlBucketsRequested,
+              usrHistoryControlBucketsGranted,
+              usrHistoryControlInterval,
+              usrHistoryControlOwner, usrHistoryControlStatus,
+              usrHistoryObjectVariable, usrHistoryObjectSampleType,
+              usrHistoryIntervalStart, usrHistoryIntervalEnd,
+              usrHistoryAbsValue, usrHistoryValStatus }
+    STATUS  current
+    DESCRIPTION
+        "The usrHistoryGroup provides user-defined collection of
+        historical information from MIB objects on the probe."
+    ::= { rmon2MIBGroups 8 }
+
+probeInformationGroup OBJECT-GROUP
+    OBJECTS { probeCapabilities,
+              probeSoftwareRev, probeHardwareRev, probeDateTime }
+    STATUS  current
+    DESCRIPTION
+        "This group describes various operating parameters of the
+        probe and controls the local time of the probe."
+    ::= { rmon2MIBGroups 9 }
+
+probeConfigurationGroup OBJECT-GROUP
+    OBJECTS { probeResetControl, probeDownloadFile,
+              probeDownloadTFTPServer, probeDownloadAction,
+              probeDownloadStatus,
+              serialMode, serialProtocol, serialTimeout,
+              serialModemInitString, serialModemHangUpString,
+              serialModemConnectResp, serialModemNoConnectResp,
+              serialDialoutTimeout, serialStatus,
+              netConfigIPAddress, netConfigSubnetMask,
+              netConfigStatus, netDefaultGateway,
+              trapDestCommunity, trapDestProtocol, trapDestAddress,
+              trapDestOwner, trapDestStatus,
+              serialConnectDestIpAddress, serialConnectType,
+              serialConnectDialString, serialConnectSwitchConnectSeq,
+              serialConnectSwitchDisconnectSeq,
+              serialConnectSwitchResetSeq,
+              serialConnectOwner, serialConnectStatus }
+    STATUS  deprecated
+    DESCRIPTION
+        "This group controls the configuration of various operating
+        parameters of the probe.  This group is not referenced by any
+        MODULE-COMPLIANCE macro because it is 'grandfathered' from
+        more recent MIB review rules that would require it."
+    ::= { rmon2MIBGroups 10 }
+
+rmon1EnhancementGroup OBJECT-GROUP
+    OBJECTS { historyControlDroppedFrames, hostControlDroppedFrames,
+              hostControlCreateTime, matrixControlDroppedFrames,
+              matrixControlCreateTime, channelDroppedFrames,
+              channelCreateTime, filterProtocolDirDataLocalIndex,
+              filterProtocolDirLocalIndex }
+    STATUS  current
+    DESCRIPTION
+        "This group adds some enhancements to RMON-1 that help
+        management stations."
+    ::= { rmon2MIBGroups 11 }
+
+rmon1EthernetEnhancementGroup OBJECT-GROUP
+    OBJECTS { etherStatsDroppedFrames, etherStatsCreateTime }
+    STATUS  current
+    DESCRIPTION
+        "This group adds some enhancements to RMON-1 that help
+        management stations."
+    ::= { rmon2MIBGroups 12 }
+
+rmon1TokenRingEnhancementGroup OBJECT-GROUP
+    OBJECTS { tokenRingMLStatsDroppedFrames,
+              tokenRingMLStatsCreateTime,
+              tokenRingPStatsDroppedFrames, tokenRingPStatsCreateTime,
+              ringStationControlDroppedFrames,
+              ringStationControlCreateTime,
+              sourceRoutingStatsDroppedFrames,
+              sourceRoutingStatsCreateTime }
+    STATUS  deprecated
+    DESCRIPTION
+        "This group adds some enhancements to RMON-1 that help
+        management stations.  This group is not referenced by any
+        MODULE-COMPLIANCE macro because it is 'grandfathered' from
+        more recent MIB review rules that would require it."
+    ::= { rmon2MIBGroups 13 }
+END
diff --git a/snmp_builder/mibs/ROHC-MIB.mib b/snmp_builder/mibs/ROHC-MIB.mib
new file mode 100644
index 0000000..8f81cb8
--- /dev/null
+++ b/snmp_builder/mibs/ROHC-MIB.mib
@@ -0,0 +1,1133 @@
+ROHC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, Counter32, mib-2
+        FROM SNMPv2-SMI                                -- [RFC2578]
+
+    TEXTUAL-CONVENTION, TruthValue,
+    TimeInterval, DateAndTime
+        FROM SNMPv2-TC                                 -- [RFC2579]
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                               -- [RFC2580]
+
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB                        -- [RFC3411]
+
+    ifIndex
+        FROM IF-MIB;                                   -- [RFC2863]
+
+rohcMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 3, 2004
+    ORGANIZATION "IETF Robust Header Compression Working Group"
+    CONTACT-INFO
+       "WG charter:
+          http://www.ietf.org/html.charters/rohc-charter.html
+
+        Mailing Lists:
+          General Discussion: rohc@ietf.org
+          To Subscribe: rohc-request@ietf.org
+          In Body: subscribe your_email_address
+
+        Editor:
+          Juergen Quittek
+          NEC Europe Ltd.
+          Network Laboratories
+          Kurfuersten-Anlage 36
+
+          69221 Heidelberg
+          Germany
+          Tel: +49 6221 90511-15
+          EMail: quittek@netlab.nec.de"
+    DESCRIPTION
+        "This MIB module defines a set of basic objects for
+         monitoring and configuring robust header compression.
+         The module covers information about running instances
+         of ROHC (compressors or decompressors) at IP interfaces.
+
+         Information about compressor contexts and decompressor
+         contexts has different structure for different profiles.
+         Therefore it is not provided by this MIB module, but by
+         individual modules for different profiles.
+
+         Copyright (C) The Internet Society (2004). The
+         initial version of this MIB module was published
+         in RFC 3816. For full legal notices see the RFC
+         itself or see:
+         http://www.ietf.org/copyrights/ianamib.html"
+
+    REVISION    "200406030000Z"  -- June 3, 2004
+    DESCRIPTION "Initial version, published as RFC 3816."
+    ::= { mib-2 112 }
+
+RohcChannelIdentifier ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "A number identifying a channel.
+         The value of 0 must not be used as identifier
+         of an existing channel."
+    SYNTAX       Unsigned32 (1..4294967295)
+
+RohcChannelIdentifierOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "A number identifying a channel.
+         The value of 0 is indicates that
+         no channel is identified."
+    SYNTAX       Unsigned32 (0..4294967295)
+
+RohcCompressionRatio ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "A number indicating a compression ratio over
+
+         a set of bytes.  The value is defined as
+         1000 * bytes(compressed) / bytes(original)
+         rounded to the next integer value.
+
+         Note that compressed sets of bytes can be larger
+         than the corresponding uncompressed ones.
+         Therefore, the number can be greater than 1000."
+    SYNTAX       Unsigned32
+
+--
+-- The groups defined within this MIB module:
+--
+
+rohcObjects       OBJECT IDENTIFIER ::= { rohcMIB 1 }
+rohcConformance   OBJECT IDENTIFIER ::= { rohcMIB 2 }
+
+--
+-- The ROHC Instance group lists properties of ROHC
+-- instances in the rohcInstanceTable, about the channels used
+-- by the instances in the rohcChanneltable and about the profiles
+-- available at the instances in the rohcProfileTable.
+--
+
+rohcInstanceObjects       OBJECT IDENTIFIER ::= { rohcObjects 1 }
+
+--
+-- Channel Table
+--
+-- Listing all channels used for ROHC data channel
+-- and/or as feedback channel.
+--
+
+rohcChannelTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcChannelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes all ROHC channels
+         per interface."
+    ::= { rohcInstanceObjects 1 }
+
+rohcChannelEntry OBJECT-TYPE
+    SYNTAX      RohcChannelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular script.  Every script that
+         is stored in non-volatile memory is required to appear in
+
+         this script table.
+
+         Note, that the rohcChannelID identifies the channel
+         uniquely.  The ifIndex is part of the index of this table
+         just in order to allow addressing channels per interface."
+    INDEX { ifIndex, rohcChannelID }
+    ::= { rohcChannelTable 1 }
+
+RohcChannelEntry ::= SEQUENCE {
+    rohcChannelID               RohcChannelIdentifier,
+    rohcChannelType             INTEGER,
+    rohcChannelFeedbackFor      RohcChannelIdentifierOrZero,
+    rohcChannelDescr            SnmpAdminString,
+    rohcChannelStatus           INTEGER
+}
+
+rohcChannelID OBJECT-TYPE
+    SYNTAX      RohcChannelIdentifier
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this channel.  The value is REQUIRED to be unique
+         per ROHC MIB implementation independent of the associated
+         interface.
+
+         The value is REQUIRED to remain constant at least from one
+         re-initialization of the entity's network management system
+         to the next re-initialization.  It is RECOMMENDED that the
+         value persist across such re-initializations."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcChannelEntry 2 }
+
+rohcChannelType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notInUse(1),
+                    rohc(2),
+                    dedicatedFeedback(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Type of usage of the channel.  A channel might be currently
+         not in use for ROHC or feedback, it might be in use as
+         a ROHC channel carrying packets and optional piggy-backed
+         feedback, or it might be used as a dedicated feedback
+         channel exclusively carrying feedback."
+    ::= { rohcChannelEntry 3 }
+
+rohcChannelFeedbackFor OBJECT-TYPE
+    SYNTAX      RohcChannelIdentifierOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The index of another channel of this interface for which
+         the channel serves as feedback channel.
+
+         If no feedback information is transferred on this channel,
+         then the value of this ID is 0.  If the channel type is set
+         to notInUse(1), then the value of this object must be 0.
+         If the channel type is rohc(2) and the value of this object
+         is a valid channel ID, then feedback information is
+         piggy-backed on the ROHC channel.  If the channel type is
+         dedicatedFeedback(3), then feedback is transferred on this
+         channel and the value of this object MUST be different from
+         0 and MUST identify an existing ROHC channel."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcChannelEntry 4 }
+
+rohcChannelDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A textual description of the channel."
+    ::= { rohcChannelEntry 5 }
+
+rohcChannelStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Status of the channel."
+    ::= { rohcChannelEntry 6 }
+
+--
+-- Instances of ROHC
+--
+-- This table lists properties of running instances of ROHC
+-- compressors and decompressors at the managed node.
+--
+
+rohcInstanceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcInstanceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists properties of running instances
+         of robust header compressors and decompressors
+         at IP interfaces.  It is indexed by interface number,
+         the type of instance (compressor or decompressor),
+         and the ID of the channel used by the instance as
+         ROHC channel.
+
+         Note that the rohcChannelID uniquely identifies an
+         instance.  The ifIndex and rohcInstanceType are part
+         of the index, because it simplifies accessing instances
+         per interface and for addressing either compressors or
+         decompressors only."
+    ::= { rohcInstanceObjects 2 }
+
+rohcInstanceEntry OBJECT-TYPE
+    SYNTAX      RohcInstanceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular instance
+         of a robust header compressor or decompressor."
+    INDEX { ifIndex, rohcInstanceType, rohcChannelID }
+    ::= { rohcInstanceTable 1 }
+
+RohcInstanceEntry ::= SEQUENCE {
+    rohcInstanceType               INTEGER,
+    rohcInstanceFBChannelID        RohcChannelIdentifierOrZero,
+    rohcInstanceVendor             OBJECT IDENTIFIER,
+    rohcInstanceVersion            SnmpAdminString,
+    rohcInstanceDescr              SnmpAdminString,
+    rohcInstanceClockRes           Unsigned32,
+    rohcInstanceMaxCID             Unsigned32,
+    rohcInstanceLargeCIDs          TruthValue,
+    rohcInstanceMRRU               Unsigned32,
+    rohcInstanceContextStorageTime TimeInterval,
+    rohcInstanceStatus             INTEGER,
+    rohcInstanceContextsTotal      Counter32,
+    rohcInstanceContextsCurrent    Unsigned32,
+    rohcInstancePackets            Counter32,
+    rohcInstanceIRs                Counter32,
+    rohcInstanceIRDYNs             Counter32,
+    rohcInstanceFeedbacks          Counter32,
+    rohcInstanceCompressionRatio   RohcCompressionRatio
+}
+
+rohcInstanceType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    compressor(1),
+                    decompressor(2)
+                }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Type of the instance of ROHC. It is either a
+         compressor instance or a decompressor instance."
+    ::= { rohcInstanceEntry 2 }
+
+rohcInstanceFBChannelID OBJECT-TYPE
+    SYNTAX      RohcChannelIdentifierOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Identifier of the channel used for feedback.
+         If no feedback channel is used, the value of
+         this object is 0 ."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcInstanceEntry 4 }
+
+rohcInstanceVendor OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An object identifier that identifies the vendor who
+         provides the implementation of robust header description.
+         This object identifier SHALL point to the object identifier
+         directly below the enterprise object identifier
+         {1 3 6 1 4 1} allocated for the vendor.  The value must be
+         the object identifier {0 0} if the vendor is not known."
+    ::= { rohcInstanceEntry 5 }
+
+rohcInstanceVersion OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of the implementation of robust header
+         compression.  The zero-length string shall be used if the
+         implementation does not have a version number.
+
+         It is suggested that the version number consist of one or
+         more decimal numbers separated by dots, where the first
+         number is called the major version number."
+    ::= { rohcInstanceEntry 6 }
+
+rohcInstanceDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A textual description of the implementation."
+    ::= { rohcInstanceEntry 7 }
+
+rohcInstanceClockRes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the system clock resolution in
+         units of milliseconds.  A zero (0) value means that there
+         is no clock available."
+    ::= { rohcInstanceEntry 8 }
+
+rohcInstanceMaxCID OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..16383)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The highest context ID number to be used by the
+         compressor.  Note that this parameter is not coupled to,
+         but in effect further constrained by,
+         rohcChannelLargeCIDs."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcInstanceEntry 9 }
+
+rohcInstanceLargeCIDs OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this boolean object returns false if
+         the short CID representation (0 bytes or 1 prefix byte,
+         covering CID 0 to 15) is used; it returns true, if the
+         embedded CID representation (1 or 2 embedded CID bytes
+         covering CID 0 to 16383) is used."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcInstanceEntry 10 }
+
+rohcInstanceMRRU OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Maximum reconstructed reception unit.  This is the
+         size of the largest reconstructed unit in octets that
+         the decompressor is expected to reassemble from
+         segments (see RFC 3095, Section 5.2.5).  Note that this
+         size includes the CRC.  If MRRU is negotiated to be 0,
+         no segment headers are allowed on the channel."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcInstanceEntry 11 }
+
+rohcInstanceContextStorageTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the default maximum amount of time
+         information on a context belonging to this instance is kept
+         as entry in the rohcContextTable after the context is
+         expired or terminated.  The value of this object is used
+         to initialize rohcContexStorageTime object when a new
+         context is created.
+         Changing the value of an rohcInstanceContextStorageTime
+         instance does not affect any entry of the rohcContextTable
+         created previously.
+         ROHC-MIB implementations SHOULD store the set value of this
+         object persistently."
+    DEFVAL { 360000 }
+    ::= { rohcInstanceEntry 12 }
+
+rohcInstanceStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Status of the instance of ROHC."
+    ::= { rohcInstanceEntry 13 }
+
+rohcInstanceContextsTotal OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Counter of all contexts created by this instance.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime."
+    ::= { rohcInstanceEntry 14 }
+
+rohcInstanceContextsCurrent OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of currently active contexts created by this
+         instance."
+    ::= { rohcInstanceEntry 15 }
+
+rohcInstancePackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Counter of all packets passing this instance.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime."
+    ::= { rohcInstanceEntry 16 }
+
+rohcInstanceIRs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all IR packets that are either sent
+         or received by this instance.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+
+         value of ifCounterDiscontinuityTime."
+    REFERENCE
+        "RFC 3095, Section 5.7.7.1"
+    ::= { rohcInstanceEntry 17 }
+
+rohcInstanceIRDYNs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all IR-DYN packets that are either sent
+         or received by this instance.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime."
+    REFERENCE
+        "RFC 3095, Section 5.7.7.2"
+    ::= { rohcInstanceEntry 18 }
+
+rohcInstanceFeedbacks OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all feedbacks that are either sent
+         or received by this instance.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime."
+    ::= { rohcInstanceEntry 19 }
+
+rohcInstanceCompressionRatio OBJECT-TYPE
+    SYNTAX      RohcCompressionRatio
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the compression ratio so far over all
+         packets on the channel served by this instance.  The
+         compression is computed over all bytes of the IP packets
+         including the IP header but excluding all lower layer
+         headers."
+    ::= { rohcInstanceEntry 20 }
+
+--
+
+-- Profile Table
+--
+
+rohcProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists a set of profiles supported by the
+         instance."
+    REFERENCE
+        "RFC 3095, Section 5.1.1"
+    ::= { rohcInstanceObjects 3 }
+
+rohcProfileEntry OBJECT-TYPE
+    SYNTAX      RohcProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular profile supported by
+         the instance.  It is indexed by the rohcChannelID
+         identifying the instance and by the rohcProfile."
+    INDEX { rohcChannelID, rohcProfile }
+    ::= { rohcProfileTable 1 }
+
+RohcProfileEntry ::= SEQUENCE {
+    rohcProfile            Unsigned32,
+    rohcProfileVendor      OBJECT IDENTIFIER,
+    rohcProfileVersion     SnmpAdminString,
+    rohcProfileDescr       SnmpAdminString,
+    rohcProfileNegotiated  TruthValue
+}
+
+rohcProfile OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Identifier of a profile supported.  For a listing of
+         possible profile values, see the IANA registry for
+         'RObust Header Compression (ROHC) Profile Identifiers'
+         at http://www.iana.org/assignments/rohc-pro-ids"
+    ::= { rohcProfileEntry 2 }
+
+rohcProfileVendor OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An object identifier that identifies the vendor who
+         provides the implementation of robust header description.
+         This object identifier SHALL point to the object identifier
+         directly below the enterprise object identifier
+         {1 3 6 1 4 1} allocated for the vendor.  The value must be
+         the object identifier {0 0} if the vendor is not known."
+    ::= { rohcProfileEntry 3 }
+
+rohcProfileVersion OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version number of the implementation of robust header
+         compression.  The zero-length string shall be used if the
+         implementation does not have a version number.
+
+         It is suggested that the version number consist of one or
+         more decimal numbers separated by dots, where the first
+         number is called the major version number."
+    ::= { rohcProfileEntry 4 }
+
+rohcProfileDescr OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A textual description of the implementation."
+    ::= { rohcProfileEntry 5 }
+
+rohcProfileNegotiated OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "When retrieved, this boolean object returns true
+         if the profile has been negotiated to be used at
+         the instance, i.e., is supported also be the
+         corresponding compressor/decompressor."
+    ::= { rohcProfileEntry 6 }
+
+--
+-- Context Table
+--
+
+rohcContextTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcContextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes all compressor contexts
+         per instance."
+    ::= { rohcObjects 2 }
+
+rohcContextEntry OBJECT-TYPE
+    SYNTAX      RohcContextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular compressor context."
+    INDEX {
+        rohcChannelID,
+        rohcContextCID
+    }
+    ::= { rohcContextTable 1 }
+
+RohcContextEntry ::= SEQUENCE {
+    rohcContextCID                  Unsigned32,
+    rohcContextCIDState             INTEGER,
+    rohcContextProfile              Unsigned32,
+    rohcContextDecompressorDepth    Unsigned32,
+    rohcContextStorageTime          TimeInterval,
+    rohcContextActivationTime       DateAndTime,
+    rohcContextDeactivationTime     DateAndTime,
+    rohcContextPackets              Counter32,
+    rohcContextIRs                  Counter32,
+    rohcContextIRDYNs               Counter32,
+    rohcContextFeedbacks            Counter32,
+    rohcContextDecompressorFailures Counter32,
+    rohcContextDecompressorRepairs  Counter32,
+    rohcContextAllPacketsRatio      RohcCompressionRatio,
+    rohcContextAllHeadersRatio      RohcCompressionRatio,
+    rohcContextAllPacketsMeanSize   Unsigned32,
+    rohcContextAllHeadersMeanSize   Unsigned32,
+    rohcContextLastPacketsRatio     RohcCompressionRatio,
+    rohcContextLastHeadersRatio     RohcCompressionRatio,
+    rohcContextLastPacketsMeanSize  Unsigned32,
+    rohcContextLastHeadersMeanSize  Unsigned32
+}
+
+rohcContextCID OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..16383)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The context identifier (CID) of this context."
+    REFERENCE
+        "RFC 3095, Sections 5.1.1 and 5.1.3"
+    ::= { rohcContextEntry 2 }
+
+rohcContextCIDState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unused(1),
+                    active(2),
+                    expired(3),
+                    terminated(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "State of the CID.  When a CID is assigned to a context,
+         its state changes from `unused' to `active'.  The active
+         context may stop operation due to some explicit
+         signalling or after observing no packet for some specified
+         time.  In the first case then the CID state changes to
+         `terminated', in the latter case it changes to `expired'.
+         If the CID is re-used again for another context, the
+         state changes back to `active'."
+    ::= { rohcContextEntry 3 }
+
+rohcContextProfile OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Identifier of the profile for this context.
+         The profile is identified by its index in the
+         rohcProfileTable for this instance.  There MUST exist a
+         corresponding entry in the rohcProfileTable using the
+         value of rohcContextProfile as second part of the index
+         (and using the same rohcChannelID as first part of the
+         index)."
+    ::= { rohcContextEntry 4 }
+
+rohcContextDecompressorDepth OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates whether reverse decompression, for
+         example as described in RFC 3095, Section 6.1, is used
+         on this channel or not, and if used, to what extent.
+
+         Its value is only valid for decompressor contexts, i.e.,
+         if rohcInstanceType has the value decompressor(2).  For
+         compressor contexts where rohcInstanceType has the value
+         compressor(1), the value of this object is irrelevant
+         and MUST be set to zero (0).
+
+         The value of the reverse decompression depth indicates
+         the maximum number of packets that are buffered, and thus
+         possibly be reverse decompressed by the decompressor.
+         A zero (0) value means that reverse decompression is not
+         used."
+    ::= { rohcContextEntry 5 }
+
+rohcContextStorageTime OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of this object specifies how long this row
+         can exist in the rohcContextTable after the
+         rohcContextCIDState switched to expired(3) or
+         terminated(4).  This object returns  the remaining time
+         that the row may exist before it is aged out.  The object
+         is initialized with the value of the  associated
+         rohcContextStorageTime object.  After expiration or
+         termination of the context, the value of this object ticks
+         backwards.  The entry in the rohcContextTable is destroyed
+         when the value reaches 0.
+
+         The value of this object may be set in order to increase or
+         reduce the remaining time that the row may exist.  Setting
+         the value to 0 will destroy this entry as soon as the
+         rochContextCIDState has the value expired(3) or
+         terminated(4).
+
+         Note that there is no guarantee that the row is stored as
+         long as this object indicates.  In case of limited CID
+         space, the instance may re-use a CID before the storage
+         time of the corresponding row in rohcContextTable reaches
+         the value of 0.  In this case the information stored in this
+         row is not anymore available."
+    ::= { rohcContextEntry 6 }
+
+rohcContextActivationTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the context started to be able to
+         compress packets or decompress packets, respectively.
+         The value '0000000000000000'H is returned if the context
+         has not been activated yet."
+    DEFVAL { '0000000000000000'H }
+    ::= { rohcContextEntry 7 }
+
+rohcContextDeactivationTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the context stopped being able to
+         compress packets or decompress packets, respectively,
+         because it expired or was terminated for other reasons.
+         The value '0000000000000000'H is returned if the context
+         has not been deactivated yet."
+    DEFVAL { '0000000000000000'H }
+    ::= { rohcContextEntry 8 }
+
+rohcContextPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all packets passing this context.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable."
+    ::= { rohcContextEntry 9 }
+
+rohcContextIRs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all IR packets sent or received,
+         respectively, by this context.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable."
+    REFERENCE
+        "RFC 3095, Section 5.7.7.1"
+    ::= { rohcContextEntry 10 }
+
+rohcContextIRDYNs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all IR-DYN packets sent or received,
+         respectively, by this context.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable."
+    REFERENCE
+        "RFC 3095, Section 5.7.7.2"
+    ::= { rohcContextEntry 11 }
+
+rohcContextFeedbacks OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all feedbacks sent or received,
+         respectively, by this context.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable."
+    ::= { rohcContextEntry 12 }
+
+rohcContextDecompressorFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all decompressor failures so far in this
+         context. The number is only valid for decompressor
+         contexts, i.e., if rohcInstanceType has the value
+         decompressor(2).
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable."
+    ::= { rohcContextEntry 13 }
+
+rohcContextDecompressorRepairs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all context repairs so far in this
+         context.  The number is only valid for decompressor
+         contexts, i.e., if rohcInstanceType has the value
+         decompressor(2).
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable."
+    ::= { rohcContextEntry 14 }
+
+rohcContextAllPacketsRatio OBJECT-TYPE
+    SYNTAX      RohcCompressionRatio
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the compression ratio so far over all
+         packets passing this context.  The compression is computed
+         over all bytes of the IP packets including the IP header
+         but excluding all lower layer headers."
+    ::= { rohcContextEntry 15 }
+
+rohcContextAllHeadersRatio OBJECT-TYPE
+    SYNTAX      RohcCompressionRatio
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the compression ratio so far over all
+         packet headers passing this context.  The compression is
+         computed over all bytes of all headers that are subject to
+         compression for the used profile."
+    ::= { rohcContextEntry 16 }
+
+rohcContextAllPacketsMeanSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the mean compressed packet size
+         of all packets passing this context.  The packet size
+         includes the IP header and payload but excludes all lower
+         layer headers.  The mean value is given in byte rounded
+         to the next integer value."
+    ::= { rohcContextEntry 17 }
+
+rohcContextAllHeadersMeanSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the mean compressed packet header size
+         of all packets passing this context.  The packet header size
+         is the sum of the size of all headers of a packet that are
+         subject to compression for the used profile.  The mean value
+         is given in byte rounded to the next integer value."
+    ::= { rohcContextEntry 18 }
+
+rohcContextLastPacketsRatio OBJECT-TYPE
+    SYNTAX      RohcCompressionRatio
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the compression ratio
+         concerning the last 16 packets passing this context
+         or concerning all packets passing this context
+         if they are less than 16, so far.  The compression is
+         computed over all bytes of the IP packets including the IP
+         header but excluding all lower layer headers."
+    ::= { rohcContextEntry 19 }
+
+rohcContextLastHeadersRatio OBJECT-TYPE
+    SYNTAX      RohcCompressionRatio
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the compression ratio concerning the
+         headers of the last 16 packets passing this context or
+         concerning the headers of all packets passing this context
+         if they are less than 16, so far.  The compression is
+         computed over all bytes of all headers that are subject to
+         compression for the used profile."
+    ::= { rohcContextEntry 20 }
+
+rohcContextLastPacketsMeanSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the mean compressed packet size
+         concerning the last 16 packets passing this context or
+         concerning all packets passing this context if they are
+         less than 16, so far.  The packet size includes the IP
+         header and payload but excludes all lower layer headers.
+         The mean value is given in byte rounded to the next
+         integer value."
+    ::= { rohcContextEntry 21 }
+
+rohcContextLastHeadersMeanSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the mean compressed packet header size
+         concerning the last 16 packets passing this context or
+         concerning all packets passing this context if they are
+         less than 16, so far.  The packet header size is the sum of
+         the size of all headers of a packet that are subject to
+         compression for the used profile.  The mean value is given
+         in byte rounded to the next integer value."
+    ::= { rohcContextEntry 22 }
+
+--
+-- conformance information
+--
+
+rohcCompliances OBJECT IDENTIFIER ::= { rohcConformance 1 }
+rohcGroups      OBJECT IDENTIFIER ::= { rohcConformance 2 }
+
+--
+-- compliance statements
+--
+
+rohcCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities that implement
+         the ROHC-MIB.
+
+         Note that compliance with this compliance
+         statement requires compliance with the
+         ifCompliance3 MODULE-COMPLIANCE statement of the
+         IF-MIB (RFC2863)."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+            rohcInstanceGroup, rohcContextGroup
+    }
+    GROUP   rohcStatisticsGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the rohcStatisticsGroup."
+    GROUP   rohcTimerGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the rohcTimerGroup."
+    OBJECT  rohcInstanceContextStorageTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "A compliant implementation does not have to support changing
+         the value of object rohcInstanceContextStorageTime."
+    OBJECT  rohcContextStorageTime
+    MIN-ACCESS  read-only
+    DESCRIPTION
+        "A compliant implementation does not have to support changing
+         the value of object rohcContextStorageTime."
+    GROUP   rohcContextStatisticsGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the rohcContextStatisticsGroup."
+    ::= { rohcCompliances 1 }
+
+rohcInstanceGroup OBJECT-GROUP
+    OBJECTS {
+        rohcChannelType,
+        rohcChannelFeedbackFor,
+        rohcChannelDescr,
+        rohcChannelStatus,
+        rohcInstanceFBChannelID,
+        rohcInstanceVendor,
+        rohcInstanceVersion,
+        rohcInstanceDescr,
+        rohcInstanceClockRes,
+        rohcInstanceMaxCID,
+        rohcInstanceLargeCIDs,
+        rohcInstanceMRRU,
+        rohcInstanceStatus,
+        rohcProfileVendor,
+        rohcProfileVersion,
+        rohcProfileDescr,
+        rohcProfileNegotiated
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         ROHC instances, used channels and available profiles."
+    ::= { rohcGroups 2 }
+
+rohcStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        rohcInstanceContextsTotal,
+        rohcInstanceContextsCurrent,
+        rohcInstancePackets,
+        rohcInstanceIRs,
+        rohcInstanceIRDYNs,
+        rohcInstanceFeedbacks,
+        rohcInstanceCompressionRatio
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing ROHC statistics."
+    ::= { rohcGroups 4 }
+
+rohcContextGroup OBJECT-GROUP
+    OBJECTS {
+        rohcContextCIDState,
+        rohcContextProfile,
+        rohcContextDecompressorDepth
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         ROHC compressor contexts and decompressor contexts."
+    ::= { rohcGroups 5 }
+
+rohcTimerGroup OBJECT-GROUP
+    OBJECTS {
+        rohcInstanceContextStorageTime,
+        rohcContextStorageTime,
+        rohcContextActivationTime,
+        rohcContextDeactivationTime
+
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing statistical information
+         about ROHC compressor contexts and decompressor contexts."
+    ::= { rohcGroups 6 }
+
+rohcContextStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        rohcContextPackets,
+        rohcContextIRs,
+        rohcContextIRDYNs,
+        rohcContextFeedbacks,
+        rohcContextDecompressorFailures,
+        rohcContextDecompressorRepairs,
+        rohcContextAllPacketsRatio,
+        rohcContextAllHeadersRatio,
+        rohcContextAllPacketsMeanSize,
+        rohcContextAllHeadersMeanSize,
+        rohcContextLastPacketsRatio,
+        rohcContextLastHeadersRatio,
+        rohcContextLastPacketsMeanSize,
+        rohcContextLastHeadersMeanSize
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing statistical information
+         about ROHC compressor contexts and decompressor contexts."
+    ::= { rohcGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/ROHC-RTP-MIB.mib b/snmp_builder/mibs/ROHC-RTP-MIB.mib
new file mode 100644
index 0000000..0937b50
--- /dev/null
+++ b/snmp_builder/mibs/ROHC-RTP-MIB.mib
@@ -0,0 +1,636 @@
+ROHC-RTP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, Counter32, mib-2
+        FROM SNMPv2-SMI                               -- [RFC2578]
+
+    TruthValue
+        FROM SNMPv2-TC                                -- [RFC2579]
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                              -- [RFC2580]
+
+    rohcChannelID, rohcContextCID
+        FROM ROHC-MIB;                                -- [RFC3816]
+
+rohcRtpMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 3, 2004
+    ORGANIZATION "IETF Robust Header Compression Working Group"
+    CONTACT-INFO
+       "WG charter:
+          http://www.ietf.org/html.charters/rohc-charter.html
+
+        Mailing Lists:
+          General Discussion: rohc@ietf.org
+          To Subscribe: rohc-request@ietf.org
+          In Body: subscribe your_email_address
+
+        Editor:
+          Juergen Quittek
+          NEC Europe Ltd.
+          Network Laboratories
+          Kurfuersten-Anlage 36
+          69221 Heidelberg
+          Germany
+          Tel: +49 6221 90511-15
+          EMail: quittek@netlab.nec.de"
+    DESCRIPTION
+        "This MIB module defines a set of objects for monitoring
+         and configuring RObust Header Compression (ROHC).
+         The objects are specific to ROHC RTP (profile 0x0001),
+         ROHC UDP (profile 0x0002), and ROHC ESP (profile 0x0003)
+         defined in RFC 3095 and for the ROHC LLA profile (profile
+         0x0005) defined in RFC 3242.
+
+         Copyright (C) The Internet Society (2004). The
+         initial version of this MIB module was published
+         in RFC 3816. For full legal notices see the RFC
+         itself or see:
+         http://www.ietf.org/copyrights/ianamib.html"
+
+    REVISION    "200406030000Z"  -- June 3, 2004
+    DESCRIPTION "Initial version, published as RFC 3816."
+    ::= { mib-2 114 }
+
+--
+-- The groups defined within this MIB module:
+--
+
+rohcRtpObjects       OBJECT IDENTIFIER ::= { rohcRtpMIB 1 }
+rohcRtpConformance   OBJECT IDENTIFIER ::= { rohcRtpMIB 2 }
+
+--
+-- Context Table
+--
+-- The rohcRtpContextTable lists all contexts per interface
+-- and instance.  It extends the rohcContextTable.
+--
+
+rohcRtpContextTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcRtpContextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes RTP profile specific
+         properties of compressor contexts and decompressor
+         contexts.  It extends the rohcContextTable of the
+         ROHC-MIB module."
+    ::= { rohcRtpObjects 1 }
+
+rohcRtpContextEntry OBJECT-TYPE
+    SYNTAX      RohcRtpContextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular context."
+    INDEX {
+        rohcChannelID,
+        rohcContextCID
+    }
+    ::= { rohcRtpContextTable 1 }
+
+RohcRtpContextEntry ::= SEQUENCE {
+    rohcRtpContextState             INTEGER,
+    rohcRtpContextMode              INTEGER,
+    rohcRtpContextAlwaysPad         TruthValue,
+    rohcRtpContextLargePktsAllowed  TruthValue,
+    rohcRtpContextVerifyPeriod      Unsigned32,
+    rohcRtpContextSizesAllowed      Unsigned32,
+    rohcRtpContextSizesUsed         Unsigned32,
+    rohcRtpContextACKs              Counter32,
+    rohcRtpContextNACKs             Counter32,
+    rohcRtpContextSNACKs            Counter32,
+    rohcRtpContextNHPs              Counter32,
+    rohcRtpContextCSPs              Counter32,
+    rohcRtpContextCCPs              Counter32,
+    rohcRtpContextPktsLostPhysical  Counter32,
+    rohcRtpContextPktsLostPreLink   Counter32
+}
+
+rohcRtpContextState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    initAndRefresh(1),
+                    firstOrder(2),
+                    secondOrder(3),
+                    noContext(4),
+                    staticContext(5),
+                    fullContext(6)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "State of the context as defined in RFC 3095.  States
+         initAndRefresh(1), firstOrder(2), and secondOrder(3)
+         are states of compressor contexts, states noContext(4),
+         staticContext(5) and fullContext(6) are states of
+         decompressor contexts."
+    REFERENCE
+        "RFC 3095"
+    ::= { rohcRtpContextEntry 3 }
+
+rohcRtpContextMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unidirectional(1),
+                    optimistic(2),
+                    reliable(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Mode of the context."
+    REFERENCE
+        "RFC 3095, Section 4.4"
+    ::= { rohcRtpContextEntry 4 }
+
+rohcRtpContextAlwaysPad OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Boolean, only applicable to compressor contexts using the
+
+         LLA profile.  If its value is true, the compressor must
+         pad every RHP packet with a minimum of one octet ROHC
+         padding.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 5.1.1"
+    DEFVAL { false }
+    ::= { rohcRtpContextEntry 5 }
+
+rohcRtpContextLargePktsAllowed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Boolean, only applicable to compressor contexts using the
+         LLA profile.  It specifies how to handle packets that do
+         not fit any of the preferred packet sizes specified.  If
+         its value is true, the compressor must deliver the larger
+         packet as-is and must not use segmentation.  If it is set
+         to false, the ROHC segmentation scheme must be used to
+         split the packet into two or more segments, and each
+         segment must further be padded to fit one of the preferred
+         packet sizes.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 5.1.1"
+    DEFVAL { true }
+    ::= { rohcRtpContextEntry 6 }
+
+rohcRtpContextVerifyPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to compressor contexts
+         using the LLA profile.  It specifies the minimum frequency
+         with which a packet validating the context must be sent.
+         This tells the compressor that a packet containing a CRC
+
+         field must be sent at least once every N packets, where N
+         is the value of the object.  A value of 0 indicates that
+         periodical verifications are disabled.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 5.1.1"
+    DEFVAL { 0 }
+    ::= { rohcRtpContextEntry 7 }
+
+rohcRtpContextSizesAllowed  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is only valid for decompressor
+         contexts, i.e., if rohcInstanceType of the corresponding
+         rohcContextEntry has the value decompressor(2).  For
+         compressor contexts where rohcInstanceType has the value
+         compressor(1), this object MUST NOT be instantiated.
+
+         This object contains the number of different packet sizes
+         that may be used in the context."
+    REFERENCE
+        "RFC 3095, Section 6.3.1"
+    ::= { rohcRtpContextEntry 8 }
+
+rohcRtpContextSizesUsed  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is only valid for decompressor
+         contexts, i.e., if rohcInstanceType of the corresponding
+         rohcContextEntry has the value decompressor(2).  For
+         compressor contexts where rohcInstanceType has the value
+         compressor(1), this object MUST NOT be instantiated.
+
+         This object contains the number of different packet sizes
+         that are used in the context."
+    REFERENCE
+        "RFC 3095, Section 6.3.1"
+    ::= { rohcRtpContextEntry 9 }
+
+rohcRtpContextACKs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all positive feedbacks (ACK) sent or
+         received in this context, respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB."
+    REFERENCE
+        "RFC 3095, Section 5.2.1."
+    ::= { rohcRtpContextEntry 10 }
+
+rohcRtpContextNACKs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all dynamic negative feedbacks (ACK) sent
+         or received in this context, respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB."
+    REFERENCE
+        "RFC 3095, Section 5.2.1."
+    ::= { rohcRtpContextEntry 11 }
+
+rohcRtpContextSNACKs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all static negative feedbacks (ACK) sent
+         or received in this context, respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB."
+    REFERENCE
+        "RFC 3095, Section 5.2.1."
+    ::= { rohcRtpContextEntry 12 }
+
+rohcRtpContextNHPs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to contexts using the
+         LLA profile.  It contains the number of all no-header
+         packets (NHP) sent or received in this context,
+         respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 4.1.1."
+    ::= { rohcRtpContextEntry 13 }
+
+rohcRtpContextCSPs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to contexts using the
+         LLA profile.  It contains the number of all context
+         synchronization packets (CSP) sent or received in this
+         context, respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 4.1.2."
+    ::= { rohcRtpContextEntry 14 }
+
+rohcRtpContextCCPs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to contexts using the
+         LLA profile.  It contains the number of all context check
+         packets (CCP) sent or received in this context,
+         respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 4.1.3."
+    ::= { rohcRtpContextEntry 15 }
+
+rohcRtpContextPktsLostPhysical OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to decompressor contexts
+
+         using the LLA profile.  It contains the number of physical
+         packet losses on the link between compressor and
+         decompressor, that have been indicated to the decompressor.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 5.1.2."
+    ::= { rohcRtpContextEntry 16 }
+
+rohcRtpContextPktsLostPreLink OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to decompressor contexts
+         using the LLA profile.  It contains the number of pre-link
+         packet losses on the link between compressor and
+         decompressor, that have been indicated to the decompressor.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+        "RFC 3242, Section 5.1.2."
+    ::= { rohcRtpContextEntry 17 }
+
+--
+-- Packet Sizes Table
+--
+-- The rohcPacketSizeTable lists allowed, preferred, and used
+-- packet sizes per compressor context.
+
+rohcRtpPacketSizeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcRtpPacketSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists all allowed, preferred, and used packet
+         sizes per compressor context and channel.
+
+         Note, that the sizes table represents implementation
+         parameters that are suggested by RFC 3095 and/or RFC 3242,
+         but that are not mandatory."
+    ::= { rohcRtpObjects 2 }
+
+rohcRtpPacketSizeEntry OBJECT-TYPE
+    SYNTAX      RohcRtpPacketSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry of a particular packet size."
+    INDEX {
+        rohcChannelID,
+        rohcContextCID,
+        rohcRtpPacketSize
+    }
+    ::= { rohcRtpPacketSizeTable 1 }
+
+RohcRtpPacketSizeEntry ::= SEQUENCE {
+    rohcRtpPacketSize                Unsigned32,
+    rohcRtpPacketSizePreferred       TruthValue,
+    rohcRtpPacketSizeUsed            TruthValue,
+    rohcRtpPacketSizeRestrictedType  INTEGER
+}
+
+rohcRtpPacketSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A packet size used as index."
+    ::= { rohcRtpPacketSizeEntry 3 }
+
+rohcRtpPacketSizePreferred OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to compressor contexts
+         using the LLA profile.  When retrieved, it will have
+         the value true(1) if the packet size is preferred.
+         Otherwise, its value will be false(2).
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+         "RFC 3242, Section 5.1.1"
+    ::= { rohcRtpPacketSizeEntry 4 }
+
+rohcRtpPacketSizeUsed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to compressor contexts
+         using the UDP, RTP, or ESP profile.  When retrieved,
+         it will have the value true(1) if the packet size is
+         used.  Otherwise, its value will be false(2).
+
+         The value of this object is only valid for UDP, RTP,
+         and ESP profiles, i.e., if the corresponding rohcProfile
+         has a value of either 0x0001, 0x0002 or 0x0003.  If
+         the corresponding rohcProfile has a value other than
+         0x0001, 0x0002 or 0x0003, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+         "RFC 3095, Section 6.3.1"
+    ::= { rohcRtpPacketSizeEntry 5 }
+
+rohcRtpPacketSizeRestrictedType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    nhpOnly(1),
+                    rhpOnly(2),
+                    noRestrictions(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is only applicable to preferred packet
+
+         sizes of compressor contexts using the LLA profile.
+         When retrieved, it will indicate whether the packet
+         size is preferred for NHP only, for RHP only, or
+         for both of them.
+
+         The value of this object is only valid for LLA profiles,
+         i.e., if the corresponding rohcProfile has a value of
+         0x0005.  If the corresponding rohcProfile has a value
+         other than 0x0005, then this object MUST NOT be
+         instantiated."
+    REFERENCE
+         "RFC 3242, Section 5.1.1"
+    ::= { rohcRtpPacketSizeEntry 6 }
+--
+-- conformance information
+--
+
+rohcRtpCompliances OBJECT IDENTIFIER ::= { rohcRtpConformance 1 }
+rohcRtpGroups      OBJECT IDENTIFIER ::= { rohcRtpConformance 2 }
+
+--
+-- compliance statements
+--
+
+rohcRtpCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities that implement
+         the ROHC-RTP-MIB.
+
+         Note that compliance with this compliance
+         statement requires compliance with the
+         rohcCompliance MODULE-COMPLIANCE statement of the
+         ROHC-MIB and with the ifCompliance3 MODULE-COMPLIANCE
+         statement of the IF-MIB (RFC2863)."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+            rohcRtpContextGroup
+    }
+    GROUP   rohcRtpPacketSizesGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the rohcRtpPacketSizesGroup."
+    GROUP   rohcRtpStatisticsGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the rohcRtpStatisticsGroup."
+    ::= { rohcRtpCompliances 1 }
+
+rohcRtpContextGroup OBJECT-GROUP
+    OBJECTS {
+        rohcRtpContextState,
+        rohcRtpContextMode,
+        rohcRtpContextAlwaysPad,
+        rohcRtpContextLargePktsAllowed,
+        rohcRtpContextVerifyPeriod
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         ROHC RTP compressors and decompressors."
+    ::= { rohcRtpGroups 1 }
+
+rohcRtpPacketSizesGroup OBJECT-GROUP
+    OBJECTS {
+        rohcRtpContextSizesAllowed,
+        rohcRtpContextSizesUsed,
+        rohcRtpPacketSizePreferred,
+        rohcRtpPacketSizeUsed,
+        rohcRtpPacketSizeRestrictedType
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         allowed and used packet sizes at a ROHC RTP compressor."
+    ::= { rohcRtpGroups 2 }
+
+rohcRtpStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        rohcRtpContextACKs,
+        rohcRtpContextNACKs,
+        rohcRtpContextSNACKs,
+        rohcRtpContextNHPs,
+        rohcRtpContextCSPs,
+        rohcRtpContextCCPs,
+        rohcRtpContextPktsLostPhysical,
+        rohcRtpContextPktsLostPreLink
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing ROHC compressor and
+         decompressor statistics."
+    ::= { rohcRtpGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/ROHC-UNCOMPRESSED-MIB.mib b/snmp_builder/mibs/ROHC-UNCOMPRESSED-MIB.mib
new file mode 100644
index 0000000..1a7918b
--- /dev/null
+++ b/snmp_builder/mibs/ROHC-UNCOMPRESSED-MIB.mib
@@ -0,0 +1,197 @@
+ROHC-UNCOMPRESSED-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, mib-2
+        FROM SNMPv2-SMI                               -- [RFC2578]
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF                              -- [RFC2580]
+
+    rohcChannelID, rohcContextCID
+        FROM ROHC-MIB;
+
+rohcUncmprMIB MODULE-IDENTITY
+    LAST-UPDATED "200406030000Z"  -- June 3, 2004
+    ORGANIZATION "IETF Robust Header Compression Working Group"
+    CONTACT-INFO
+       "WG charter:
+          http://www.ietf.org/html.charters/rohc-charter.html
+
+        Mailing Lists:
+          General Discussion: rohc@ietf.org
+          To Subscribe: rohc-request@ietf.org
+          In Body: subscribe your_email_address
+
+        Editor:
+          Juergen Quittek
+          NEC Europe Ltd.
+          Network Laboratories
+          Kurfuersten-Anlage 36
+          69221 Heidelberg
+          Germany
+          Tel: +49 6221 90511-15
+          EMail: quittek@netlab.nec.de"
+    DESCRIPTION
+        "This MIB module defines a set of objects for monitoring
+         and configuring RObust Header Compression (ROHC).
+         The objects are specific to ROHC uncompressed
+         (profile 0x0000).
+
+         Copyright (C) The Internet Society (2004). The
+         initial version of this MIB module was published
+         in RFC 3816. For full legal notices see the RFC
+         itself or see:
+         http://www.ietf.org/copyrights/ianamib.html"
+
+    REVISION    "200406030000Z"  -- June 3, 2004
+    DESCRIPTION "Initial version, published as RFC 3816."
+    ::= { mib-2 113 }
+
+--
+-- The groups defined within this MIB module:
+--
+
+rohcUncmprObjects       OBJECT IDENTIFIER ::= { rohcUncmprMIB 1 }
+rohcUncmprConformance   OBJECT IDENTIFIER ::= { rohcUncmprMIB 2 }
+
+--
+-- Context Table
+--
+-- The rohcUncmprContextTable lists all contexts per interface
+
+-- and instance.  It extends the rohcContextTable.
+--
+
+rohcUncmprContextTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RohcUncmprContextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table lists and describes ROHC uncompressed profile
+         specific properties of compressor contexts and
+         decompressor contexts.  It extends the rohcContextTable
+         of the ROHC-MIB module."
+    ::= { rohcUncmprObjects 1 }
+
+rohcUncmprContextEntry OBJECT-TYPE
+    SYNTAX      RohcUncmprContextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a particular context."
+    INDEX {
+        rohcChannelID,
+        rohcContextCID
+    }
+    ::= { rohcUncmprContextTable 1 }
+
+RohcUncmprContextEntry ::= SEQUENCE {
+    rohcUncmprContextState         INTEGER,
+    rohcUncmprContextMode          INTEGER,
+    rohcUncmprContextACKs          Counter32
+}
+
+rohcUncmprContextState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    initAndRefresh(1),
+                    normal(2),
+                    noContext(3),
+                    fullContext(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "State of the context. States initAndRefresh(1) and normal(2)
+         are states of compressor contexts, states noContext(3)
+         and fullContext(4) are states of decompressor contexts."
+    REFERENCE
+        "RFC 3095, Section 5.10.3"
+    ::= { rohcUncmprContextEntry 3 }
+
+rohcUncmprContextMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unidirectional(1),
+                    bidirectional(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Mode of the context."
+    REFERENCE
+        "RFC 3095, Section 5.10.3"
+    ::= { rohcUncmprContextEntry 4 }
+
+rohcUncmprContextACKs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of all positive feedbacks (ACK) sent or
+         received in this context, respectively.
+
+         Discontinuities in the value of this counter can
+         occur at re-initialization of the management
+         system, and at other times as indicated by the
+         value of ifCounterDiscontinuityTime.  For checking
+         ifCounterDiscontinuityTime, the interface index is
+         required.  It can be determined by reading the
+         rohcChannelTable of the ROHC-MIB."
+    REFERENCE
+        "RFC 3095, Section 5.2.1"
+    ::= { rohcUncmprContextEntry 5 }
+
+--
+-- conformance information
+--
+
+rohcUncmprCompliances OBJECT IDENTIFIER
+    ::= { rohcUncmprConformance 1 }
+rohcUncmprGroups      OBJECT IDENTIFIER
+    ::= { rohcUncmprConformance 2 }
+
+--
+-- compliance statements
+--
+
+rohcUncmprCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities that implement
+         the ROHC-UNCOMPRESSED-MIB.
+
+         Note that compliance with this compliance
+         statement requires compliance with the
+         rohcCompliance MODULE-COMPLIANCE statement of the
+         ROHC-MIB and with the ifCompliance3 MODULE-COMPLIANCE
+         statement of the IF-MIB (RFC2863)."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+            rohcUncmprContextGroup
+    }
+    GROUP   rohcUncmprStatisticsGroup
+    DESCRIPTION
+       "A compliant implementation does not have to implement
+        the rohcUncmprStatisticsGroup."
+    ::= { rohcUncmprCompliances 1 }
+
+rohcUncmprContextGroup OBJECT-GROUP
+    OBJECTS {
+        rohcUncmprContextState,
+        rohcUncmprContextMode
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         ROHC uncompressed compressors and decompressors."
+    ::= { rohcUncmprGroups 1 }
+
+rohcUncmprStatisticsGroup OBJECT-GROUP
+    OBJECTS {
+        rohcUncmprContextACKs
+    }
+    STATUS      current
+    DESCRIPTION
+        "An object providing context statistics."
+    ::= { rohcUncmprGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/RS-232-MIB.mib b/snmp_builder/mibs/RS-232-MIB.mib
new file mode 100644
index 0000000..33a07bc
--- /dev/null
+++ b/snmp_builder/mibs/RS-232-MIB.mib
@@ -0,0 +1,788 @@
+RS-232-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32
+        FROM SNMPv2-SMI
+    InterfaceIndex
+        FROM IF-MIB
+    transmission
+        FROM RFC1213-MIB
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+rs232 MODULE-IDENTITY
+    LAST-UPDATED "9405261700Z"
+    ORGANIZATION "IETF Character MIB Working Group"
+    CONTACT-INFO
+            "        Bob Stewart
+             Postal: Xyplex, Inc.
+
+                     295 Foster Street
+                     Littleton, MA 01460
+
+                Tel: 508-952-4816
+                Fax: 508-952-4887
+             E-mail: rlstewart@eng.xyplex.com"
+    DESCRIPTION
+            "The MIB module for RS-232-like hardware devices."
+    ::= { transmission 33 }
+
+-- Generic RS-232-like information
+
+rs232Number OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of ports (regardless of their current
+        state) in the RS-232-like general port table."
+    ::= { rs232 1 }
+
+-- RS-232-like General Port Table
+
+rs232PortTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Rs232PortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port entries.  The number of entries is
+        given by the value of rs232Number."
+    ::= { rs232 2 }
+
+rs232PortEntry OBJECT-TYPE
+    SYNTAX Rs232PortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Status and parameter values for a port."
+    INDEX { rs232PortIndex }
+    ::= { rs232PortTable 1 }
+
+Rs232PortEntry ::=
+    SEQUENCE {
+        rs232PortIndex
+            InterfaceIndex,
+        rs232PortType
+
+            INTEGER,
+        rs232PortInSigNumber
+            Integer32,
+        rs232PortOutSigNumber
+            Integer32,
+        rs232PortInSpeed
+            Integer32,
+        rs232PortOutSpeed
+            Integer32,
+        rs232PortInFlowType
+            INTEGER,
+        rs232PortOutFlowType
+            INTEGER
+    }
+
+rs232PortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of ifIndex for the port.  By convention
+        and if possible, hardware port numbers map directly
+        to external connectors.  The value for each port must
+        remain constant at least from one re-initialization
+        of the network management agent to the next."
+    ::= { rs232PortEntry 1 }
+
+rs232PortType OBJECT-TYPE
+    SYNTAX INTEGER { other(1), rs232(2), rs422(3),
+                     rs423(4), v35(5), x21(6) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The port's hardware type."
+    ::= { rs232PortEntry 2 }
+
+rs232PortInSigNumber OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of input signals for the port in the
+        input signal table (rs232PortInSigTable).  The table
+        contains entries only for those signals the software
+        can detect and that are useful to observe."
+    ::= { rs232PortEntry 3 }
+
+rs232PortOutSigNumber OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of output signals for the port in the
+        output signal table (rs232PortOutSigTable).  The
+        table contains entries only for those signals the
+        software can assert and that are useful to observe."
+    ::= { rs232PortEntry 4 }
+
+rs232PortInSpeed OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's input speed in bits per second.  Note that
+        non-standard values, such as 9612, are probably not allowed
+        on most implementations."
+    ::= { rs232PortEntry 5 }
+
+rs232PortOutSpeed OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's output speed in bits per second.  Note that
+        non-standard values, such as 9612, are probably not allowed
+        on most implementations."
+    ::= { rs232PortEntry 6 }
+
+rs232PortInFlowType OBJECT-TYPE
+    SYNTAX INTEGER { none(1), ctsRts(2), dsrDtr(3) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's type of input flow control.  'none'
+        indicates no flow control at this level.
+        'ctsRts' and 'dsrDtr' indicate use of the indicated
+        hardware signals."
+    ::= { rs232PortEntry 7 }
+
+rs232PortOutFlowType OBJECT-TYPE
+    SYNTAX INTEGER { none(1), ctsRts(2), dsrDtr(3) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's type of output flow control.  'none'
+
+        indicates no flow control at this level.
+        'ctsRts' and 'dsrDtr' indicate use of the indicated
+        hardware signals."
+    ::= { rs232PortEntry 8 }
+
+-- RS-232-like Asynchronous Port Table
+
+rs232AsyncPortTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Rs232AsyncPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of asynchronous port entries.  Entries need
+        not exist for synchronous ports."
+    ::= { rs232 3 }
+
+rs232AsyncPortEntry OBJECT-TYPE
+    SYNTAX Rs232AsyncPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Status and parameter values for an asynchronous
+        port."
+    INDEX { rs232AsyncPortIndex }
+    ::= { rs232AsyncPortTable 1 }
+
+Rs232AsyncPortEntry ::=
+    SEQUENCE {
+        rs232AsyncPortIndex
+            InterfaceIndex,
+        rs232AsyncPortBits
+            INTEGER,
+        rs232AsyncPortStopBits
+            INTEGER,
+        rs232AsyncPortParity
+            INTEGER,
+        rs232AsyncPortAutobaud
+            INTEGER,
+        rs232AsyncPortParityErrs
+            Counter32,
+        rs232AsyncPortFramingErrs
+            Counter32,
+        rs232AsyncPortOverrunErrs
+            Counter32
+
+    }
+
+rs232AsyncPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A unique value for each port.  Its value is the
+        same as rs232PortIndex for the port."
+    ::= { rs232AsyncPortEntry 1 }
+
+rs232AsyncPortBits OBJECT-TYPE
+    SYNTAX INTEGER (5..8)
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's number of bits in a character."
+    ::= { rs232AsyncPortEntry 2 }
+
+rs232AsyncPortStopBits OBJECT-TYPE
+    SYNTAX INTEGER { one(1), two(2),
+                     oneAndHalf(3), dynamic(4) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's number of stop bits."
+    ::= { rs232AsyncPortEntry 3 }
+
+rs232AsyncPortParity OBJECT-TYPE
+    SYNTAX INTEGER { none(1), odd(2), even(3),
+                     mark(4), space(5) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The port's sense of a character parity bit."
+    ::= { rs232AsyncPortEntry 4 }
+
+rs232AsyncPortAutobaud OBJECT-TYPE
+    SYNTAX INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "A control for the port's ability to automatically
+        sense input speed.
+
+        When rs232PortAutoBaud is 'enabled', a port may
+        autobaud to values different from the set values for
+        speed, parity, and character size.  As a result a
+        network management system may temporarily observe
+        values different from what was previously set."
+    ::= { rs232AsyncPortEntry 5 }
+
+rs232AsyncPortParityErrs OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of characters with a parity error,
+        input from the port since system re-initialization
+        and while the port state was 'up' or 'test'."
+    ::= { rs232AsyncPortEntry 6 }
+
+rs232AsyncPortFramingErrs OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of characters with a framing error,
+        input from the port since system re-initialization
+        and while the port state was 'up' or 'test'."
+    ::= { rs232AsyncPortEntry 7 }
+
+rs232AsyncPortOverrunErrs OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of characters with an overrun error,
+        input from the port since system re-initialization
+        and while the port state was 'up' or 'test'."
+    ::= { rs232AsyncPortEntry 8 }
+
+-- RS-232-like Synchronous Port Table
+
+rs232SyncPortTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Rs232SyncPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of asynchronous port entries.  Entries need
+        not exist for synchronous ports."
+    ::= { rs232 4 }
+
+rs232SyncPortEntry OBJECT-TYPE
+    SYNTAX Rs232SyncPortEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Status and parameter values for a synchronous
+        port."
+    INDEX { rs232SyncPortIndex }
+    ::= { rs232SyncPortTable 1 }
+
+Rs232SyncPortEntry ::=
+    SEQUENCE {
+        rs232SyncPortIndex
+            InterfaceIndex,
+        rs232SyncPortClockSource
+            INTEGER,
+        rs232SyncPortFrameCheckErrs
+            Counter32,
+        rs232SyncPortTransmitUnderrunErrs
+            Counter32,
+        rs232SyncPortReceiveOverrunErrs
+            Counter32,
+        rs232SyncPortInterruptedFrames
+            Counter32,
+        rs232SyncPortAbortedFrames
+            Counter32,
+        rs232SyncPortRole
+            INTEGER,
+        rs232SyncPortEncoding
+            INTEGER,
+        rs232SyncPortRTSControl
+            INTEGER,
+        rs232SyncPortRTSCTSDelay
+            Integer32,
+        rs232SyncPortMode
+            INTEGER,
+        rs232SyncPortIdlePattern
+            INTEGER,
+        rs232SyncPortMinFlags
+            Integer32
+    }
+
+rs232SyncPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "A unique value for each port.  Its value is the
+        same as rs232PortIndex for the port."
+    ::= { rs232SyncPortEntry 1 }
+
+rs232SyncPortClockSource OBJECT-TYPE
+    SYNTAX INTEGER { internal(1), external(2), split(3) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "Source of the port's bit rate clock. 'split' means
+        the tranmit clock is internal and the receive clock
+        is external."
+    ::= { rs232SyncPortEntry 2 }
+
+rs232SyncPortFrameCheckErrs OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of frames with an invalid frame check
+        sequence, input from the port since system
+        re-initialization and while the port state was 'up'
+        or 'test'."
+    ::= { rs232SyncPortEntry 3 }
+
+rs232SyncPortTransmitUnderrunErrs OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of frames that failed to be
+        transmitted on the port since system
+        re-initialization and while the port state was 'up'
+        or 'test' because data was not available to the
+        transmitter in time."
+    ::= { rs232SyncPortEntry 4 }
+
+rs232SyncPortReceiveOverrunErrs OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of frames that failed to be received
+        on the port since system re-initialization and while
+        the port state was 'up' or 'test' because the
+        receiver did not accept the data in time."
+    ::= { rs232SyncPortEntry 5 }
+
+rs232SyncPortInterruptedFrames OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Total number of frames that failed to be received
+        or transmitted on the port due to loss of modem
+        signals since system re-initialization and while the
+        port state was 'up' or 'test'."
+    ::= { rs232SyncPortEntry 6 }
+
+rs232SyncPortAbortedFrames OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Number of frames aborted on the port due to
+        receiving an abort sequence since system
+        re-initialization and while the port state was 'up'
+        or 'test'."
+    ::= { rs232SyncPortEntry 7 }
+
+rs232SyncPortRole OBJECT-TYPE
+    SYNTAX INTEGER  { dte(1), dce(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The role the device is playing that is using this port.
+           dte    means the device is performing the role of
+                  data terminal equipment
+           dce    means the device is performing the role of
+                  data circuit-terminating equipment."
+    DEFVAL { dce }
+    ::= { rs232SyncPortEntry 8 }
+
+rs232SyncPortEncoding OBJECT-TYPE
+    SYNTAX INTEGER  { nrz(1), nrzi(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The bit stream encoding technique that is in effect
+         for this port.
+           nrz    for Non-Return to Zero encoding
+           nrzi   for Non-Return to Zero Inverted encoding."
+    DEFVAL { nrz }
+    ::= { rs232SyncPortEntry 9 }
+
+rs232SyncPortRTSControl OBJECT-TYPE
+    SYNTAX INTEGER  { controlled(1), constant(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The method used to control the Request To Send (RTS)
+         signal.
+
+           controlled  when the DTE is asserts RTS each time
+                       data needs to be transmitted and drops
+                       RTS at some point after data
+                       transmission begins.
+
+                       If rs232SyncPortRole is 'dte', the
+                       RTS is an output signal. The device
+                       will issue a RTS and wait for a CTS
+                       from the DCE before starting to
+                       transmit.
+
+                       If rs232SyncPortRole is 'dce', the
+                       RTS is an input signal. The device
+                       will issue a CTS only after having
+                       received RTS and waiting the
+                       rs232SyncPortRTSCTSDelay interval.
+
+           constant    when the DTE constantly asserts RTS."
+    DEFVAL { constant }
+    ::= { rs232SyncPortEntry 10 }
+
+rs232SyncPortRTSCTSDelay OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The interval (in milliseconds) that the DCE must wait
+         after it sees RTS asserted before asserting CTS.  This
+         object exists in support of older synchronous devices
+         that cannot recognize CTS within a certain interval
+         after it asserts RTS."
+    DEFVAL { 0 }
+    ::= { rs232SyncPortEntry 11 }
+
+rs232SyncPortMode OBJECT-TYPE
+    SYNTAX INTEGER  { fdx(1), hdx(2), simplex-receive(3),
+                      simplex-send(4) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The mode of operation of the port with respect to the
+         direction and simultaneity of data transfer.
+
+           fdx              when frames on the data link can be
+                            transmitted and received at the same
+                            time
+
+           hdx              when frames can either be received
+                            from the data link or transmitted
+                            onto the data link but not at the
+                            same time.
+
+           simplex-receive  when frames can only be received on
+                            this data link.
+
+           simplex-send     when frames can only be sent on this
+                            data link."
+    DEFVAL { fdx }
+    ::= { rs232SyncPortEntry 12 }
+
+rs232SyncPortIdlePattern OBJECT-TYPE
+    SYNTAX INTEGER  { mark(1), space(2) }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The bit pattern used to indicate an idle line."
+    DEFVAL { space }
+    ::= { rs232SyncPortEntry 13 }
+
+rs232SyncPortMinFlags OBJECT-TYPE
+    SYNTAX Integer32
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The minimum number of flag patterns this port needs in
+         order to recognize the end of one frame and the start
+         of the next.  Plausible values are 1 and 2."
+    DEFVAL { 2 }
+    ::= { rs232SyncPortEntry 14 }
+
+-- Input Signal Table
+
+rs232InSigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Rs232InSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port input control signal entries
+        implemented and visible to the software on the port,
+        and useful to monitor."
+    ::= { rs232 5 }
+
+rs232InSigEntry OBJECT-TYPE
+    SYNTAX Rs232InSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Input control signal status for a hardware port."
+    INDEX { rs232InSigPortIndex, rs232InSigName }
+    ::= { rs232InSigTable 1 }
+
+Rs232InSigEntry ::=
+    SEQUENCE {
+        rs232InSigPortIndex
+            InterfaceIndex,
+        rs232InSigName
+            INTEGER,
+        rs232InSigState
+            INTEGER,
+        rs232InSigChanges
+            Counter32
+    }
+
+rs232InSigPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of rs232PortIndex for the port to which
+        this entry belongs."
+    ::= { rs232InSigEntry 1 }
+
+rs232InSigName OBJECT-TYPE
+    SYNTAX INTEGER { rts(1), cts(2), dsr(3), dtr(4), ri(5),
+                     dcd(6), sq(7), srs(8), srts(9),
+                     scts(10), sdcd(11) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Identification of a hardware signal, as follows:
+
+            rts    Request to Send
+            cts    Clear to Send
+            dsr    Data Set Ready
+            dtr    Data Terminal Ready
+            ri     Ring Indicator
+            dcd    Received Line Signal Detector
+            sq     Signal Quality Detector
+
+            srs    Data Signaling Rate Selector
+            srts   Secondary Request to Send
+            scts   Secondary Clear to Send
+            sdcd   Secondary Received Line Signal Detector
+        "
+    REFERENCE
+        "EIA Standard RS-232-C, August 1969."
+    ::= { rs232InSigEntry 2 }
+
+rs232InSigState OBJECT-TYPE
+    SYNTAX INTEGER { none(1), on(2), off(3) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current signal state."
+    ::= { rs232InSigEntry 3 }
+
+rs232InSigChanges OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of times the signal has changed from
+        'on' to 'off' or from 'off' to 'on'."
+    ::= { rs232InSigEntry 4 }
+
+-- Output Signal Table
+
+rs232OutSigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Rs232OutSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A list of port output control signal entries
+        implemented and visible to the software on the port,
+        and useful to monitor."
+    ::= { rs232 6 }
+
+rs232OutSigEntry OBJECT-TYPE
+    SYNTAX Rs232OutSigEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "Output control signal status for a hardware port."
+    INDEX { rs232OutSigPortIndex, rs232OutSigName }
+    ::= { rs232OutSigTable 1 }
+
+Rs232OutSigEntry ::=
+    SEQUENCE {
+        rs232OutSigPortIndex
+            InterfaceIndex,
+        rs232OutSigName
+            INTEGER,
+        rs232OutSigState
+            INTEGER,
+        rs232OutSigChanges
+            Counter32
+    }
+
+rs232OutSigPortIndex OBJECT-TYPE
+    SYNTAX InterfaceIndex
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of rs232PortIndex for the port to which
+        this entry belongs."
+    ::= { rs232OutSigEntry 1 }
+
+rs232OutSigName OBJECT-TYPE
+    SYNTAX INTEGER { rts(1), cts(2), dsr(3), dtr(4), ri(5),
+                     dcd(6), sq(7), srs(8), srts(9),
+                     scts(10), sdcd(11) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "Identification of a hardware signal, as follows:
+
+            rts    Request to Send
+            cts    Clear to Send
+            dsr    Data Set Ready
+            dtr    Data Terminal Ready
+            ri     Ring Indicator
+            dcd    Received Line Signal Detector
+            sq     Signal Quality Detector
+            srs    Data Signaling Rate Selector
+            srts   Secondary Request to Send
+            scts   Secondary Clear to Send
+            sdcd   Secondary Received Line Signal Detector
+        "
+    REFERENCE
+        "EIA Standard RS-232-C, August 1969."
+    ::= { rs232OutSigEntry 2 }
+
+rs232OutSigState OBJECT-TYPE
+    SYNTAX INTEGER { none(1), on(2), off(3) }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The current signal state."
+    ::= { rs232OutSigEntry 3 }
+
+rs232OutSigChanges OBJECT-TYPE
+    SYNTAX Counter32
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The number of times the signal has changed from
+        'on' to 'off' or from 'off' to 'on'."
+    ::= { rs232OutSigEntry 4 }
+
+-- conformance information
+
+rs232Conformance OBJECT IDENTIFIER ::= { rs232 7 }
+
+rs232Groups      OBJECT IDENTIFIER ::= { rs232Conformance 1 }
+rs232Compliances OBJECT IDENTIFIER ::= { rs232Conformance 2 }
+
+-- compliance statements
+
+rs232Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities
+            which have RS-232-like hardware interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { rs232Group }
+
+        GROUP   rs232AsyncGroup
+        DESCRIPTION
+            "The Asynch group is mandatory only for those
+             SNMPv2 entities which have asynchronous
+             interfaces Rs-232-like."
+
+        GROUP   rs232SyncGroup
+        DESCRIPTION
+            "The Synch group is mandatory only for those
+             SNMPv2 entities which have synchronous
+             interfaces Rs-232-like."
+    ::= { rs232Compliances 1 }
+
+-- units of conformance
+
+rs232Group    OBJECT-GROUP
+    OBJECTS { rs232Number, rs232PortIndex, rs232PortType,
+              rs232PortInSigNumber, rs232PortOutSigNumber,
+              rs232PortInSpeed, rs232PortOutSpeed,
+              rs232PortInFlowType, rs232PortOutFlowType,
+              rs232InSigPortIndex, rs232InSigName,
+              rs232InSigState, rs232InSigChanges,
+              rs232OutSigPortIndex, rs232OutSigName,
+              rs232OutSigState, rs232OutSigChanges }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+             applicable to all RS-232-like interfaces."
+    ::= { rs232Groups 1 }
+
+rs232AsyncGroup OBJECT-GROUP
+    OBJECTS { rs232AsyncPortIndex, rs232AsyncPortBits,
+              rs232AsyncPortStopBits, rs232AsyncPortParity,
+              rs232AsyncPortAutobaud, rs232AsyncPortParityErrs,
+              rs232AsyncPortFramingErrs, rs232AsyncPortOverrunErrs }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+             applicable to asynchronous RS-232-like interfaces."
+    ::= { rs232Groups 2 }
+
+rs232SyncGroup OBJECT-GROUP
+    OBJECTS { rs232SyncPortIndex, rs232SyncPortClockSource,
+              rs232SyncPortFrameCheckErrs,
+              rs232SyncPortTransmitUnderrunErrs,
+              rs232SyncPortReceiveOverrunErrs,
+              rs232SyncPortInterruptedFrames,
+              rs232SyncPortAbortedFrames }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+             applicable to synchronous RS-232-like interfaces."
+    ::= { rs232Groups 3 }
+
+rs232SyncSDLCGroup OBJECT-GROUP
+    OBJECTS { rs232SyncPortRole,
+              rs232SyncPortEncoding,
+              rs232SyncPortRTSControl,
+              rs232SyncPortRTSCTSDelay,
+              rs232SyncPortMode,
+              rs232SyncPortIdlePattern,
+              rs232SyncPortMinFlags }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+             applicable to synchronous RS-232-like interfaces
+             running SDLC."
+    ::= { rs232Groups 4 }
+
+END
diff --git a/snmp_builder/mibs/RSERPOOL-MIB.mib b/snmp_builder/mibs/RSERPOOL-MIB.mib
new file mode 100644
index 0000000..acbfc86
--- /dev/null
+++ b/snmp_builder/mibs/RSERPOOL-MIB.mib
@@ -0,0 +1,1439 @@
+RSERPOOL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, experimental,
+   TimeTicks, Unsigned32
+      FROM SNMPv2-SMI
+   TEXTUAL-CONVENTION
+      FROM SNMPv2-TC
+   MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF
+   InetAddressType, InetAddress, InetPortNumber
+      FROM INET-ADDRESS-MIB;
+
+-- ## Module definition ###########################################
+rserpoolMIB MODULE-IDENTITY
+   LAST-UPDATED
+      "200904070000Z" -- April 07, 2009
+   ORGANIZATION
+      "IEM-TdR, UNIVERSITY OF DUISBURG-ESSEN"
+   CONTACT-INFO
+      " THOMAS-DREIBHOLZ
+
+         Postal:  University of Duisburg-Essen
+                  Institute for Experimental Mathematics
+                  Ellernstrasse 29
+                  D-45326 Essen
+                  Germany
+         Phone:   +49-201-183-7637
+         Fax:     +49-201-183-7673
+         Email:   dreibh@iem.uni-due.de
+
+      JAIWANT-MULIK
+
+         Postal:  Delaware State University
+                  CIS Department
+                  1200 N. DuPont Hw
+                  Dover, DE
+                  USA 19904
+         Phone:   +1-302-857-7910
+         Fax:     +1-302-857-6552
+         Email:   jaiwant@mulik.com"
+      DESCRIPTION
+         "The MIB module for managing an RSerPool implementation.
+
+          Copyright (c) 2009 IETF Trust and the persons identified as
+          authors of the code.  All rights reserved.
+
+          Redistribution and use in source and binary forms, with or
+          without modification, are permitted provided that the
+          following conditions are met:
+
+          - Redistributions of source code must retain the above
+            copyright notice, this list of conditions and the
+            following disclaimer.
+
+          - Redistributions in binary form must reproduce the above
+            copyright notice, this list of conditions and the
+            following disclaimer in the documentation and/or other
+            materials provided with the distribution.
+
+          - Neither the name of Internet Society, IETF or IETF Trust,
+            nor the names of specific contributors, may be used to
+            endorse or promote products derived from this software
+            without specific prior written permission.
+
+          THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+          CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+          INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+          MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+          DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+          CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+          SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+          NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+          LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+          HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+          CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+          OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+          SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+          DAMAGE.
+
+          This version of this MIB module is part of RFC 5525;
+          see the RFC itself for full legal notices."
+
+      REVISION
+         "200904070000Z" -- April 07, 2009
+      DESCRIPTION
+         "This version of the MIB module is published as RFC 5525"
+      ::= { experimental 125 }
+
+-- ## RSerPool type definitions ###################################
+RSerPoolENRPServerIdentifierTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "x"
+   STATUS       current
+   DESCRIPTION  "The ID of an ENRP server"
+   SYNTAX       Unsigned32 (1..4294967295)
+
+RSerPoolOperationScopeTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "1024t"
+   STATUS       current
+   DESCRIPTION  "The ID of an operation scope"
+   SYNTAX       OCTET STRING (SIZE (0..65535))
+
+RSerPoolPoolHandleTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "1024t"
+   STATUS       current
+   DESCRIPTION  "The pool handle"
+   SYNTAX       OCTET STRING (SIZE (0..65535))
+
+RserpoolPoolElementIdentifierTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "x"
+   STATUS       current
+   DESCRIPTION  "The pool element ID"
+   SYNTAX       Unsigned32 (1..4294967295)
+
+RSerPoolPolicyIdentifierTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "x"
+   STATUS       current
+   DESCRIPTION  "The ID of the pool policy"
+   SYNTAX       Unsigned32 (1..4294967295)
+
+RSerPoolPolicyLoadTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS       current
+   DESCRIPTION  "The load status of a pool element"
+   SYNTAX       Unsigned32 (0..4294967295)
+
+RSerPoolPolicyWeightTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS       current
+   DESCRIPTION  "The weight of a pool element"
+   SYNTAX       Unsigned32 (0..4294967295)
+
+RSerPoolTransportUseTypeTC ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION "The transport use of a pool element"
+   SYNTAX       INTEGER {
+      dataOnly(0),
+      dataPlusControl(1)
+   }
+
+RSerPoolOpaqueAddressTC ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "1024t"
+   STATUS       current
+   DESCRIPTION  "Opaque address"
+   SYNTAX       OCTET STRING  (SIZE (0..65535))
+
+-- ## Top-level definitions #######################################
+rserpoolMIBObjects     OBJECT IDENTIFIER ::= { rserpoolMIB 1 }
+rserpoolMIBConformance OBJECT IDENTIFIER ::= { rserpoolMIB 2 }
+
+rserpoolENRPServers    OBJECT IDENTIFIER ::= { rserpoolMIBObjects 1 }
+rserpoolPoolElements   OBJECT IDENTIFIER ::= { rserpoolMIBObjects 2 }
+rserpoolPoolUsers      OBJECT IDENTIFIER ::= { rserpoolMIBObjects 3 }
+
+-- ################################################################
+-- #### ENRP Servers Section                                   ####
+-- ################################################################
+
+-- ## Definition of the ENRP server table #########################
+rserpoolENRPTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The table listing of ENRP servers."
+   ::= { rserpoolENRPServers 1 }
+
+rserpoolENRPEntry OBJECT-TYPE
+   SYNTAX     RserpoolENRPEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An ENRP server entry in the table listing of ENRP
+      servers."
+   INDEX { rserpoolENRPIndex }
+   ::= { rserpoolENRPTable 1 }
+
+RserpoolENRPEntry ::= SEQUENCE {
+rserpoolENRPIndex                Unsigned32,
+rserpoolENRPOperationScope       RSerPoolOperationScopeTC,
+rserpoolENRPIdentifier           RSerPoolENRPServerIdentifierTC,
+rserpoolENRPDescription          OCTET STRING,
+rserpoolENRPUptime               TimeTicks,
+rserpoolENRPPort                 InetPortNumber,
+rserpoolENRPASAPAnnouncePort     InetPortNumber,
+rserpoolENRPASAPAnnounceAddrType InetAddressType,
+rserpoolENRPASAPAnnounceAddr     InetAddress,
+rserpoolENRPENRPAnnouncePort     InetPortNumber,
+rserpoolENRPENRPAnnounceAddrType InetAddressType,
+rserpoolENRPENRPAnnounceAddr     InetAddress }
+
+rserpoolENRPIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An integer to uniquely identify an ENRP server."
+   ::= { rserpoolENRPEntry 1 }
+
+rserpoolENRPOperationScope OBJECT-TYPE
+   SYNTAX     RSerPoolOperationScopeTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The definition of the operation scope of this ENRP server."
+   REFERENCE
+      "Section 1.2 of RFC 3237 defines the term operation scope."
+   ::= { rserpoolENRPEntry 2 }
+
+rserpoolENRPIdentifier OBJECT-TYPE
+   SYNTAX     RSerPoolENRPServerIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ENRP server identifier of this ENRP server."
+   REFERENCE
+      "Section 3.1 of RFC 5351 explains the ENRP server identifier."
+   ::= { rserpoolENRPEntry 3 }
+
+rserpoolENRPDescription OBJECT-TYPE
+   SYNTAX     OCTET STRING (SIZE (0..255))
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "A textual description of this ENRP server, e.g., its location
+      and a contact address of its administrator.
+
+      This object SHOULD be maintained in a persistent manner."
+   ::= { rserpoolENRPEntry 4 }
+
+rserpoolENRPUptime OBJECT-TYPE
+   SYNTAX     TimeTicks
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ENRP service uptime of this ENRP server."
+   ::= { rserpoolENRPEntry 5 }
+
+rserpoolENRPPort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The Stream Control Transmission Protocol (SCTP) port number of
+      the ENRP protocol endpoint of this ENRP server."
+   REFERENCE
+      "RFC 5353 defines the ENRP protocol."
+   ::= { rserpoolENRPEntry 6 }
+
+rserpoolENRPASAPAnnouncePort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The destination UDP port number to which ASAP multicast announce
+      messages are sent."
+   REFERENCE
+      "Section 3.2 of RFC 5351 explains the server-discovery mechanism
+      using ASAP announces."
+   ::= { rserpoolENRPEntry 7 }
+
+rserpoolENRPASAPAnnounceAddrType OBJECT-TYPE
+   SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol over which ASAP multicast announce
+      messages are sent."
+   REFERENCE
+      "Section 3.2 of RFC 5351 explains the server-discovery mechanism
+      using ASAP announces."
+   ::= { rserpoolENRPEntry 8 }
+
+rserpoolENRPASAPAnnounceAddr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The destination IP multicast address to which ASAP multicast
+      announce messages are sent.  The type of this address is
+      given in rserpoolENRPASAPAnnounceAddrType."
+   REFERENCE
+      "Section 3.2 of RFC 5351 explains the server-discovery mechanism
+      using ASAP announces."
+   ::= { rserpoolENRPEntry 9 }
+
+rserpoolENRPENRPAnnouncePort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The destination UDP port number to which ENRP multicast announce
+      messages are sent."
+   REFERENCE
+      "Section 3.1 of RFC 5353 explains the ENRP multicast
+      announce mechanism."
+   ::= { rserpoolENRPEntry 10 }
+
+rserpoolENRPENRPAnnounceAddrType OBJECT-TYPE
+   SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol over which ENRP multicast announce
+      messages are sent."
+   REFERENCE
+      "Section 3.1 of RFC 5353 explains the ENRP multicast
+      announce mechanism."
+   ::= { rserpoolENRPEntry 11 }
+
+rserpoolENRPENRPAnnounceAddr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The destination multicast IP address to which ENRP multicast
+      announce messages are sent.  The type of this address
+      is given in rserpoolENRPENRPAnnounceAddrType."
+   REFERENCE
+      "Section 3.1 of RFC 5353 explains the ENRP multicast
+      announce mechanism."
+   ::= { rserpoolENRPEntry 12 }
+
+-- ## Definition of the pool table ################################
+rserpoolENRPPoolTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPPoolEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The table listing of pools."
+   ::= { rserpoolENRPServers 3 }
+
+rserpoolENRPPoolEntry OBJECT-TYPE
+   SYNTAX     RserpoolENRPPoolEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The pool entry in the table listing of pools."
+   INDEX { rserpoolENRPIndex, rserpoolENRPPoolIndex }
+   ::= { rserpoolENRPPoolTable 1 }
+
+RserpoolENRPPoolEntry ::= SEQUENCE {
+   rserpoolENRPPoolIndex  Unsigned32,
+   rserpoolENRPPoolHandle RSerPoolPoolHandleTC }
+
+rserpoolENRPPoolIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An integer to uniquely identify a pool."
+   ::= { rserpoolENRPPoolEntry 1 }
+
+rserpoolENRPPoolHandle OBJECT-TYPE
+   SYNTAX     RSerPoolPoolHandleTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool handle of this pool."
+   REFERENCE
+      "Section 1.2 of RFC 3237 defines the term pool handle."
+   ::= { rserpoolENRPPoolEntry 2 }
+
+-- ## Definition of the pool element table ########################
+rserpoolENRPPoolElementTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPPoolElementEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The table listing of pool elements."
+   ::= { rserpoolENRPServers 4 }
+
+rserpoolENRPPoolElementEntry OBJECT-TYPE
+   SYNTAX     RserpoolENRPPoolElementEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A pool element in the table listing of pool elements."
+   INDEX {
+      rserpoolENRPIndex,
+      rserpoolENRPPoolIndex,
+      rserpoolENRPPoolElementIndex }
+   ::= { rserpoolENRPPoolElementTable 1 }
+
+RserpoolENRPPoolElementEntry ::= SEQUENCE {
+   rserpoolENRPPoolElementIndex   Unsigned32,
+   rserpoolENRPPoolElementID      RserpoolPoolElementIdentifierTC,
+   rserpoolENRPASAPTransportPort  InetPortNumber,
+   rserpoolENRPUserTransportProto Unsigned32,
+   rserpoolENRPUserTransportPort  InetPortNumber,
+   rserpoolENRPUserTransportUse   RSerPoolTransportUseTypeTC,
+   rserpoolENRPPolicyID           RSerPoolPolicyIdentifierTC,
+   rserpoolENRPPolicyDescription  OCTET STRING,
+   rserpoolENRPPolicyWeight       RSerPoolPolicyWeightTC,
+   rserpoolENRPPolicyLoad         RSerPoolPolicyLoadTC,
+   rserpoolENRPPolicyLoadDeg      RSerPoolPolicyLoadTC,
+   rserpoolENRPRegistrationLife   TimeTicks,
+   rserpoolENRPHomeENRPServer     RSerPoolENRPServerIdentifierTC }
+
+rserpoolENRPPoolElementIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An integer to uniquely identify a pool element.  Note,
+      that uniqueness of a pool element identifier in the pool
+      is not enforced; therefore, this index is required here!"
+   ::={ rserpoolENRPPoolElementEntry 1 }
+
+rserpoolENRPPoolElementID OBJECT-TYPE
+   SYNTAX     RserpoolPoolElementIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool element identifier of this pool element."
+   REFERENCE
+      "Section 2.2 of RFC 5351 explains the pool element identifier
+      usage."
+   ::={ rserpoolENRPPoolElementEntry 2 }
+
+rserpoolENRPASAPTransportPort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The SCTP port number of the ASAP endpoint of this pool
+      element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the port number is given here."
+   ::= { rserpoolENRPPoolElementEntry 3 }
+
+rserpoolENRPUserTransportProto OBJECT-TYPE
+   SYNTAX     Unsigned32 (0..255)
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The transport protocol number of the service endpoint
+      of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the transport protocol number is given here."
+   ::= { rserpoolENRPPoolElementEntry 4 }
+
+rserpoolENRPUserTransportPort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The transport protocol's port number of the service
+      endpoint of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the port number is given here."
+   ::= { rserpoolENRPPoolElementEntry 5 }
+
+rserpoolENRPUserTransportUse OBJECT-TYPE
+   SYNTAX     RSerPoolTransportUseTypeTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The transport use of the service endpoint of this pool
+      element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the transport use is given here."
+   ::= { rserpoolENRPPoolElementEntry 6 }
+
+rserpoolENRPPolicyID OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool policy of this pool element."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy identifier is given here."
+   ::= { rserpoolENRPPoolElementEntry 7 }
+
+rserpoolENRPPolicyDescription OBJECT-TYPE
+   SYNTAX     OCTET STRING (SIZE (0..255))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The textual description of the pool policy of this pool
+      element."
+   ::= { rserpoolENRPPoolElementEntry 8 }
+
+rserpoolENRPPolicyWeight OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyWeightTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool policy's weight parameter for this pool element."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy's weight parameter is given here."
+   ::= { rserpoolENRPPoolElementEntry 9 }
+
+rserpoolENRPPolicyLoad OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyLoadTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool policy's load status for this pool element."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy's load parameter is given here."
+   ::= { rserpoolENRPPoolElementEntry 10 }
+
+rserpoolENRPPolicyLoadDeg OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyLoadTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool policy's load degradation parameter for this pool
+      element."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy's load degradation parameter is
+      given here."
+   ::= { rserpoolENRPPoolElementEntry 11 }
+
+rserpoolENRPRegistrationLife OBJECT-TYPE
+   SYNTAX     TimeTicks
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The registration life of this pool element."
+  REFERENCE
+      "Section 3.10 of RFC 5354 defines the Registration Life."
+   ::= { rserpoolENRPPoolElementEntry 12 }
+
+rserpoolENRPHomeENRPServer OBJECT-TYPE
+   SYNTAX     RSerPoolENRPServerIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ID of the Home ENRP server of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the Home ENRP Server
+      Identifier."
+   ::= { rserpoolENRPPoolElementEntry 13 }
+
+-- ## Definition of the ASAP transport address list table #########
+rserpoolENRPASAPAddrTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPASAPAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of all IP addresses of the ASAP transport
+      endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the addresses are listed in this table."
+   ::= { rserpoolENRPServers 5 }
+
+rserpoolENRPASAPAddrTableEntry  OBJECT-TYPE
+   SYNTAX     RserpoolENRPASAPAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An IP address of the ASAP transport endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which an address is contained by this entry."
+   INDEX {
+      rserpoolENRPIndex,
+      rserpoolENRPPoolIndex,
+      rserpoolENRPPoolElementIndex,
+      rserpoolENRPASAPAddrTableIndex }
+   ::= { rserpoolENRPASAPAddrTable 1 }
+
+RserpoolENRPASAPAddrTableEntry ::= SEQUENCE {
+   rserpoolENRPASAPAddrTableIndex Unsigned32,
+   rserpoolENRPASAPL3Type         InetAddressType,
+   rserpoolENRPASAPL3Addr         InetAddress }
+
+rserpoolENRPASAPAddrTableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for the IP address of an ASAP transport
+      endpoint."
+   ::= { rserpoolENRPASAPAddrTableEntry 1 }
+
+rserpoolENRPASAPL3Type OBJECT-TYPE
+   SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol (IPv4 or IPv6) of an IP address of
+      an ASAP transport endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the network-layer protocol number is given here."
+   ::= { rserpoolENRPASAPAddrTableEntry 2 }
+
+rserpoolENRPASAPL3Addr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The IP address of an ASAP transport endpoint.  The type of
+      this address is given in rserpoolENRPASAPL3Type."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the network-layer address (IPv4 or IPv6) is given here."
+   ::= { rserpoolENRPASAPAddrTableEntry 3 }
+
+-- ## Definition of the user transport address list table #########
+rserpoolENRPUserAddrTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPUserAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of all IP addresses of the user
+      transport endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the addresses are listed in this table."
+   ::= { rserpoolENRPServers 6 }
+
+rserpoolENRPUserAddrTableEntry  OBJECT-TYPE
+   SYNTAX     RserpoolENRPUserAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An IP address of the user transport endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which an address is contained by this entry."
+   INDEX {
+      rserpoolENRPIndex,
+      rserpoolENRPPoolIndex,
+      rserpoolENRPPoolElementIndex,
+      rserpoolENRPUserAddrTableIndex }
+   ::= { rserpoolENRPUserAddrTable 1 }
+
+RserpoolENRPUserAddrTableEntry ::= SEQUENCE {
+   rserpoolENRPUserAddrTableIndex Unsigned32,
+   rserpoolENRPUserL3Type         InetAddressType,
+   rserpoolENRPUserL3Addr         InetAddress,
+   rserpoolENRPUserL3Opaque       RSerPoolOpaqueAddressTC }
+
+rserpoolENRPUserAddrTableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for the IP address of a user transport
+      endpoint."
+   ::= { rserpoolENRPUserAddrTableEntry 1 }
+
+rserpoolENRPUserL3Type OBJECT-TYPE
+   SYNTAX     InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol (IPv4 or IPv6) of an IP address
+      of a user transport endpoint.  Set to unknown for an opaque
+      address."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the network-layer protocol number is given here."
+   ::= { rserpoolENRPUserAddrTableEntry 2 }
+
+rserpoolENRPUserL3Addr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(0|4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The IP address of a user transport endpoint.  The type of
+      this address is given in rserpoolENRPUserL3Type."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the network-layer address (IPv4 or IPv6) is given here."
+   ::= { rserpoolENRPUserAddrTableEntry 3 }
+
+rserpoolENRPUserL3Opaque OBJECT-TYPE
+   SYNTAX     RSerPoolOpaqueAddressTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The opaque address of a user transport endpoint."
+   REFERENCE
+      "Section 3.16 of RFC 5354 defines the opaque transport address."
+   ::= { rserpoolENRPUserAddrTableEntry 4 }
+
+-- ## Definition of ENRP address list table #######################
+rserpoolENRPENRPAddrTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPENRPAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of all IP addresses of the ENRP
+      transport endpoint."
+   ::= { rserpoolENRPServers 7 }
+
+rserpoolENRPENRPAddrTableEntry  OBJECT-TYPE
+   SYNTAX     RserpoolENRPENRPAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An IP address of the ENRP transport endpoint."
+   INDEX {
+      rserpoolENRPIndex,
+      rserpoolENRPENRPAddrTableIndex }
+   ::= { rserpoolENRPENRPAddrTable 1 }
+
+RserpoolENRPENRPAddrTableEntry ::= SEQUENCE {
+   rserpoolENRPENRPAddrTableIndex Unsigned32,
+   rserpoolENRPENRPL3Type         InetAddressType,
+   rserpoolENRPENRPL3Addr         InetAddress }
+
+rserpoolENRPENRPAddrTableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for the IP address of an ENRP transport
+      endpoint."
+   ::= { rserpoolENRPENRPAddrTableEntry 1 }
+
+rserpoolENRPENRPL3Type OBJECT-TYPE
+   SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol (IPv4 or IPv6) of an IP address of
+      an ENRP transport endpoint."
+   REFERENCE
+      "RFC 5353 defines the ENRP protocol."
+   ::= { rserpoolENRPENRPAddrTableEntry 2 }
+
+rserpoolENRPENRPL3Addr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The IP address of an ENRP transport endpoint.  The type of
+      this address is given in rserpoolENRPENRPL3Type."
+   REFERENCE
+      "RFC 5353 defines the ENRP protocol."
+   ::= { rserpoolENRPENRPAddrTableEntry 3 }
+
+-- ## Definition of peer table ####################################
+rserpoolENRPPeerTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPPeerEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The table listing of a peer table."
+   ::= { rserpoolENRPServers 8 }
+
+rserpoolENRPPeerEntry OBJECT-TYPE
+   SYNTAX     RserpoolENRPPeerEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A peer entry in the table listing of a peer table."
+   INDEX { rserpoolENRPPeerIndex }
+   ::= { rserpoolENRPPeerTable 1 }
+
+RserpoolENRPPeerEntry ::= SEQUENCE {
+   rserpoolENRPPeerIndex      Unsigned32,
+   rserpoolENRPPeerIdentifier RSerPoolENRPServerIdentifierTC,
+   rserpoolENRPPeerPort       InetPortNumber,
+   rserpoolENRPPeerLastHeard  TimeTicks }
+
+rserpoolENRPPeerIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for a peer entry in the table
+      listing of a peer table."
+   ::= { rserpoolENRPPeerEntry 1 }
+
+rserpoolENRPPeerIdentifier OBJECT-TYPE
+   SYNTAX     RSerPoolENRPServerIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ENRP identifier of this peer."
+   REFERENCE
+      "RFC 5353 explains the usage of the ENRP server identifier."
+   ::= { rserpoolENRPPeerEntry 2 }
+
+rserpoolENRPPeerPort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The SCTP port number of the ENRP transport endpoint of
+      this peer."
+   REFERENCE
+      "RFC 5353 defines the ENRP protocol."
+   ::= { rserpoolENRPPeerEntry 3 }
+
+rserpoolENRPPeerLastHeard OBJECT-TYPE
+   SYNTAX     TimeTicks
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The time since the reception of the last ENRP Presence
+      message of this peer."
+   REFERENCE
+      "Section 4.1 of RFC 5353 defines the last heard value."
+   ::= { rserpoolENRPPeerEntry 4 }
+
+-- ## Definition of peer address list table #######################
+rserpoolENRPPeerAddrTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolENRPPeerAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of the peer endpoint addresses."
+   ::= { rserpoolENRPServers 9 }
+
+rserpoolENRPPeerAddrTableEntry  OBJECT-TYPE
+   SYNTAX     RserpoolENRPPeerAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of all IP addresses of the ENRP
+      transport endpoint of a peer referenced by rserpoolENRPPeerIndex."
+   INDEX {
+      rserpoolENRPPeerIndex,
+      rserpoolENRPPeerAddrTableIndex }
+   ::= { rserpoolENRPPeerAddrTable 1 }
+
+RserpoolENRPPeerAddrTableEntry ::= SEQUENCE {
+   rserpoolENRPPeerAddrTableIndex Unsigned32,
+   rserpoolENRPPeerL3Type         InetAddressType,
+   rserpoolENRPPeerL3Addr         InetAddress }
+
+rserpoolENRPPeerAddrTableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for the IP address of a peer ENRP
+      transport endpoint."
+   ::= { rserpoolENRPPeerAddrTableEntry 1 }
+
+rserpoolENRPPeerL3Type OBJECT-TYPE
+   SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol (IPv4 or IPv6) of an IP address
+      of a peer ENRP transport endpoint."
+   REFERENCE
+      "RFC 5353 defines the ENRP protocol."
+   ::= { rserpoolENRPPeerAddrTableEntry 2 }
+
+rserpoolENRPPeerL3Addr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The IP address of a peer ENRP transport endpoint.  The type
+      of this address is given in rserpoolENRPPeerL3Type."
+   REFERENCE
+      "RFC 5353 defines the ENRP protocol."
+   ::= { rserpoolENRPPeerAddrTableEntry 3 }
+
+-- ################################################################
+-- #### Pool Elements Section                                  ####
+-- ################################################################
+
+-- ## Definition of the pool element table ########################
+rserpoolPETable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolPEEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The table listing of pool elements."
+   ::= { rserpoolPoolElements 1 }
+
+rserpoolPEEntry OBJECT-TYPE
+   SYNTAX     RserpoolPEEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A pool element in the table listing of pool elements."
+   INDEX { rserpoolPEIndex }
+   ::= { rserpoolPETable 1 }
+
+RserpoolPEEntry ::= SEQUENCE {
+   rserpoolPEIndex              Unsigned32,
+   rserpoolPEOperationScope     RSerPoolOperationScopeTC,
+   rserpoolPEPoolHandle         RSerPoolPoolHandleTC,
+   rserpoolPEIdentifier         RserpoolPoolElementIdentifierTC,
+   rserpoolPEDescription        OCTET STRING,
+   rserpoolPEUptime             TimeTicks,
+   rserpoolPEASAPTransportPort  InetPortNumber,
+   rserpoolPEUserTransportProto Unsigned32,
+   rserpoolPEUserTransportPort  InetPortNumber,
+   rserpoolPEUserTransportUse   RSerPoolTransportUseTypeTC,
+   rserpoolPEPolicyID           RSerPoolPolicyIdentifierTC,
+   rserpoolPEPolicyDescription  OCTET STRING,
+   rserpoolPEPolicyWeight       RSerPoolPolicyWeightTC,
+   rserpoolPEPolicyLoad         RSerPoolPolicyLoadTC,
+   rserpoolPEPolicyLoadDeg      RSerPoolPolicyLoadTC,
+   rserpoolPERegistrationLife   TimeTicks,
+   rserpoolPEHomeENRPServer     RSerPoolENRPServerIdentifierTC }
+
+rserpoolPEIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An integer to uniquely identify a pool element.  Note,
+      that uniqueness of a pool element identifier in the pool
+      is not enforced; therefore, this index is required here!"
+   ::={ rserpoolPEEntry 1 }
+
+rserpoolPEOperationScope OBJECT-TYPE
+   SYNTAX     RSerPoolOperationScopeTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The operation scope of this pool element."
+   REFERENCE
+      "Section 1.2 of RFC 3237 defines the term operation scope."
+   ::= { rserpoolPEEntry 2 }
+
+rserpoolPEPoolHandle OBJECT-TYPE
+   SYNTAX     RSerPoolPoolHandleTC
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The pool handle of this pool element.  Changing this object
+      will update the pool element's pool handle and result in a
+      re-registration.
+
+      This object SHOULD be maintained in a persistent manner."
+   REFERENCE
+      "Section 1.2 of RFC 3237 defines the term pool handle."
+   ::={ rserpoolPEEntry 3 }
+
+rserpoolPEIdentifier OBJECT-TYPE
+   SYNTAX     RserpoolPoolElementIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool element identifier of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the pool element identifier."
+   ::={ rserpoolPEEntry 4 }
+
+rserpoolPEDescription OBJECT-TYPE
+   SYNTAX     OCTET STRING (SIZE (0..255))
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "A textual description of this pool element, e.g., its location
+      and a contact address of its administrator.
+
+      This object SHOULD be maintained in a persistent manner."
+   ::= { rserpoolPEEntry 5 }
+
+rserpoolPEUptime OBJECT-TYPE
+   SYNTAX     TimeTicks
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ENRP service uptime of this pool element."
+   ::= { rserpoolPEEntry 6 }
+
+rserpoolPEASAPTransportPort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The SCTP port number of the ASAP endpoint of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the port number is given here."
+   ::= { rserpoolPEEntry 7 }
+
+rserpoolPEUserTransportProto OBJECT-TYPE
+   SYNTAX     Unsigned32 (0..255)
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The transport protocol number of the service endpoint
+      of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the transport protocol number is given here."
+   ::= { rserpoolPEEntry 8 }
+
+rserpoolPEUserTransportPort OBJECT-TYPE
+   SYNTAX     InetPortNumber
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The transport protocol's port number of the service
+      endpoint of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the port number is given here."
+   ::= { rserpoolPEEntry 9 }
+
+rserpoolPEUserTransportUse OBJECT-TYPE
+   SYNTAX     RSerPoolTransportUseTypeTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The transport use of the service endpoint of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the transport use is given here."
+   ::= { rserpoolPEEntry 10 }
+
+rserpoolPEPolicyID OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyIdentifierTC
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The pool policy of this pool element.  Changing this object
+      will update the pool element's policy and result in a
+
+      re-registration.
+
+      This object SHOULD be maintained in a persistent manner."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy identifier is given here."
+   ::= { rserpoolPEEntry 11 }
+
+rserpoolPEPolicyDescription OBJECT-TYPE
+   SYNTAX     OCTET STRING (SIZE (0..255))
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The textual description of the pool policy of this pool element.
+
+      This object SHOULD be maintained in a persistent manner."
+   ::= { rserpoolPEEntry 12 }
+
+rserpoolPEPolicyWeight OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyWeightTC
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The pool policy's weight parameter for this pool element.
+      Changing this object will update the pool element's policy
+      weight setting and result in a re-registration.
+
+      This object SHOULD be maintained in a persistent manner."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy's weight parameter is given here."
+   ::= { rserpoolPEEntry 13 }
+
+rserpoolPEPolicyLoad OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyLoadTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The pool policy's load status for this pool element."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy's load parameter is given here."
+   ::= { rserpoolPEEntry 14 }
+
+rserpoolPEPolicyLoadDeg OBJECT-TYPE
+   SYNTAX     RSerPoolPolicyLoadTC
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The pool policy's load degradation parameter for this pool
+      element.  Changing this object will update the pool element's
+      load degradation setting and result in a re-registration.
+
+      This object SHOULD be maintained in a persistent manner."
+   REFERENCE
+      "Section 3.8 of RFC 5354 defines the Member Selection Policy
+      Parameter of which the policy's load degradation parameter is
+      given here."
+   ::= { rserpoolPEEntry 15 }
+
+rserpoolPERegistrationLife OBJECT-TYPE
+   SYNTAX     TimeTicks
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The registration life of this pool element.  Changing this
+      object will update the pool element's lifetime setting and
+      result in a re-registration.
+
+      This object SHOULD be maintained in a persistent manner."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the Registration Life."
+   ::= { rserpoolPEEntry 16 }
+
+rserpoolPEHomeENRPServer OBJECT-TYPE
+   SYNTAX     RSerPoolENRPServerIdentifierTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ID of the Home ENRP server of this pool element."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the Home ENRP Server
+      Identifier."
+   ::= { rserpoolPEEntry 17 }
+
+-- ## Definition of the ASAP transport address list table #########
+rserpoolPEASAPAddrTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolPEASAPAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of all IP addresses of the ASAP transport
+      endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the addresses are listed in this table."
+   ::= { rserpoolPoolElements 2 }
+
+rserpoolPEASAPAddrTableEntry  OBJECT-TYPE
+   SYNTAX     RserpoolPEASAPAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An IP address of the ASAP transport endpoint."
+  REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which an address is contained by this entry."
+  INDEX {
+      rserpoolPEIndex,
+      rserpoolPEASAPAddrTableIndex }
+   ::= { rserpoolPEASAPAddrTable 1 }
+
+RserpoolPEASAPAddrTableEntry ::= SEQUENCE {
+   rserpoolPEASAPAddrTableIndex Unsigned32,
+   rserpoolPEASAPL3Type         InetAddressType,
+   rserpoolPEASAPL3Addr         InetAddress }
+
+rserpoolPEASAPAddrTableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for the IP address of an ASAP transport
+      endpoint."
+   ::= { rserpoolPEASAPAddrTableEntry 1 }
+
+rserpoolPEASAPL3Type OBJECT-TYPE
+   SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol (IPv4 or IPv6) of an IP address of
+      an ASAP transport endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the network-layer protocol number is given here."
+   ::= { rserpoolPEASAPAddrTableEntry 2 }
+
+rserpoolPEASAPL3Addr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The IP address of an ASAP transport endpoint.  The type of
+      this address is given in rserpoolPEASAPL3Type."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the ASAP Transport Parameter of
+      which the network-layer address (IPv4 or IPv6) is given here."
+   ::= { rserpoolPEASAPAddrTableEntry 3 }
+
+-- ## Definition of the user transport address list table #########
+rserpoolPEUserAddrTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolPEUserAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A table listing of all IP addresses of the user
+      transport endpoint."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the addresses are listed in this table."
+   ::= { rserpoolPoolElements 6 }
+
+rserpoolPEUserAddrTableEntry  OBJECT-TYPE
+   SYNTAX     RserpoolPEUserAddrTableEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An IP address of the user transport endpoint."
+  REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which an address is contained by this entry."
+   INDEX {
+      rserpoolPEIndex,
+      rserpoolPEUserAddrTableIndex }
+   ::= { rserpoolPEUserAddrTable 1 }
+
+RserpoolPEUserAddrTableEntry ::= SEQUENCE {
+   rserpoolPEUserAddrTableIndex Unsigned32,
+   rserpoolPEUserL3Type         InetAddressType,
+   rserpoolPEUserL3Addr         InetAddress,
+   rserpoolPEUserL3Opaque       RSerPoolOpaqueAddressTC }
+
+rserpoolPEUserAddrTableIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A unique identifier for the IP address of a user transport
+      endpoint."
+   ::= { rserpoolPEUserAddrTableEntry 1 }
+
+rserpoolPEUserL3Type OBJECT-TYPE
+   SYNTAX     InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The network-layer protocol of an IP address of a user transport
+      endpoint.  Set to unknown for opaque address."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the network-layer protocol number is given here."
+   ::= { rserpoolPEUserAddrTableEntry 2 }
+
+rserpoolPEUserL3Addr OBJECT-TYPE
+   SYNTAX     InetAddress (SIZE(0|4|16))
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The IP address of a user transport endpoint.  The type of
+      this address is given in rserpoolPEUserL3Addr."
+   REFERENCE
+      "Section 3.10 of RFC 5354 defines the User Transport Parameter of
+      which the network-layer address (IPv4 or IPv6) is given here."
+   ::= { rserpoolPEUserAddrTableEntry 3 }
+
+rserpoolPEUserL3Opaque OBJECT-TYPE
+   SYNTAX     RSerPoolOpaqueAddressTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The opaque address of a user transport endpoint."
+   REFERENCE
+      "Section 3.16 of RFC 5354 defines the opaque transport address."
+   ::= { rserpoolPEUserAddrTableEntry 4 }
+
+-- ################################################################
+-- #### Pool Users Section                                     ####
+-- ################################################################
+
+-- ## Definition of the pool user table ###########################
+rserpoolPUTable OBJECT-TYPE
+   SYNTAX     SEQUENCE OF RserpoolPUEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "The table listing of pool users."
+   ::= { rserpoolPoolUsers 1 }
+
+rserpoolPUEntry OBJECT-TYPE
+   SYNTAX     RserpoolPUEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "A pool user in the table listing of pool users."
+   INDEX { rserpoolPUIndex }
+   ::= { rserpoolPUTable 1 }
+
+RserpoolPUEntry ::= SEQUENCE {
+   rserpoolPUIndex          Unsigned32,
+   rserpoolPUOperationScope RSerPoolOperationScopeTC,
+   rserpoolPUPoolHandle     RSerPoolPoolHandleTC,
+   rserpoolPUDescription    OCTET STRING,
+   rserpoolPUUptime         TimeTicks }
+
+rserpoolPUIndex OBJECT-TYPE
+   SYNTAX     Unsigned32 (1..4294967295)
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An integer to uniquely identify a pool user."
+   ::= { rserpoolPUEntry 1 }
+
+rserpoolPUOperationScope OBJECT-TYPE
+   SYNTAX     RSerPoolOperationScopeTC
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The operation scope of this pool user."
+   REFERENCE
+      "Section 1.2 of RFC 3237 defines the term operation scope."
+   ::= { rserpoolPUEntry 2 }
+
+rserpoolPUPoolHandle OBJECT-TYPE
+   SYNTAX     RSerPoolPoolHandleTC
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "The pool handle of this pool user.  Changing this object
+      will update the pool user's pool handle for all future
+      sessions.
+
+      This object SHOULD be maintained in a persistent manner."
+   REFERENCE
+      "Section 1.2 of RFC 3237 defines the term pool handle."
+   ::={ rserpoolPUEntry 3 }
+
+rserpoolPUDescription OBJECT-TYPE
+   SYNTAX     OCTET STRING (SIZE (0..255))
+   MAX-ACCESS read-write
+   STATUS     current
+   DESCRIPTION
+      "A textual description of this pool user, e.g., its location
+      and a contact address of its administrator.
+
+      This object SHOULD be maintained in a persistent manner."
+   ::= { rserpoolPUEntry 4 }
+
+rserpoolPUUptime OBJECT-TYPE
+   SYNTAX     TimeTicks
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The ENRP service uptime of this pool user."
+   ::= { rserpoolPUEntry 5 }
+
+-- ## MIB conformance and compliance ##############################
+rserpoolMIBCompliances OBJECT IDENTIFIER ::= {
+   rserpoolMIBConformance 1
+}
+
+rserpoolMIBGroups OBJECT IDENTIFIER ::= {
+   rserpoolMIBConformance 2
+}
+
+rserpoolMIBCompliance MODULE-COMPLIANCE
+   STATUS  current
+   DESCRIPTION
+      "The compliance statement for SNMP entities that implement
+      RSerPool."
+   MODULE
+   MANDATORY-GROUPS {
+      rserpoolENRPGroup,
+      rserpoolPEGroup,
+      rserpoolPUGroup }
+   ::= { rserpoolMIBCompliances 1 }
+
+rserpoolENRPGroup OBJECT-GROUP
+   OBJECTS {
+      rserpoolENRPOperationScope,
+      rserpoolENRPIdentifier,
+      rserpoolENRPDescription,
+      rserpoolENRPUptime,
+      rserpoolENRPPort,
+      rserpoolENRPASAPAnnouncePort,
+      rserpoolENRPASAPAnnounceAddr,
+      rserpoolENRPASAPAnnounceAddrType,
+      rserpoolENRPENRPAnnounceAddrType,
+      rserpoolENRPENRPAnnouncePort,
+      rserpoolENRPENRPAnnounceAddr,
+      rserpoolENRPPoolHandle,
+      rserpoolENRPPoolElementID,
+      rserpoolENRPASAPTransportPort,
+      rserpoolENRPUserTransportProto,
+      rserpoolENRPUserTransportUse,
+      rserpoolENRPUserTransportPort,
+      rserpoolENRPPolicyID,
+      rserpoolENRPPolicyDescription,
+      rserpoolENRPPolicyWeight,
+      rserpoolENRPPolicyLoad,
+      rserpoolENRPPolicyLoadDeg,
+      rserpoolENRPRegistrationLife,
+      rserpoolENRPHomeENRPServer,
+      rserpoolENRPASAPL3Type,
+      rserpoolENRPASAPL3Addr,
+      rserpoolENRPUserL3Type,
+      rserpoolENRPUserL3Addr,
+      rserpoolENRPUserL3Opaque,
+      rserpoolENRPENRPL3Type,
+      rserpoolENRPENRPL3Addr,
+      rserpoolENRPPeerIdentifier,
+      rserpoolENRPPeerPort,
+      rserpoolENRPPeerLastHeard,
+      rserpoolENRPPeerL3Type,
+      rserpoolENRPPeerL3Addr }
+   STATUS current
+   DESCRIPTION
+      "The group contains all ENRP server instances
+      running on the system"
+   ::= { rserpoolMIBGroups 1 }
+
+rserpoolPEGroup OBJECT-GROUP
+   OBJECTS {
+      rserpoolPEOperationScope,
+      rserpoolPEPoolHandle,
+      rserpoolPEIdentifier,
+      rserpoolPEDescription,
+      rserpoolPEUptime,
+      rserpoolPEASAPTransportPort,
+      rserpoolPEUserTransportProto,
+      rserpoolPEUserTransportPort,
+      rserpoolPEUserTransportUse,
+      rserpoolPEPolicyID,
+      rserpoolPEPolicyDescription,
+      rserpoolPEPolicyWeight,
+      rserpoolPEPolicyLoad,
+      rserpoolPEPolicyLoadDeg,
+      rserpoolPERegistrationLife,
+      rserpoolPEHomeENRPServer,
+      rserpoolPEASAPL3Type,
+      rserpoolPEASAPL3Addr,
+      rserpoolPEUserL3Type,
+      rserpoolPEUserL3Addr,
+      rserpoolPEUserL3Opaque }
+   STATUS current
+   DESCRIPTION
+      "The group contains all pool element instances
+      running on the system"
+   ::= { rserpoolMIBGroups 2 }
+
+rserpoolPUGroup OBJECT-GROUP
+   OBJECTS { rserpoolPUOperationScope,
+      rserpoolPUPoolHandle,
+      rserpoolPUDescription,
+      rserpoolPUUptime }
+   STATUS current
+   DESCRIPTION
+      "The group contains all pool user instances
+      running on the system"
+   ::= { rserpoolMIBGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/RSTP-MIB.mib b/snmp_builder/mibs/RSTP-MIB.mib
new file mode 100644
index 0000000..3b7cc3c
--- /dev/null
+++ b/snmp_builder/mibs/RSTP-MIB.mib
@@ -0,0 +1,306 @@
+RSTP-MIB DEFINITIONS ::= BEGIN
+
+-- -------------------------------------------------------------
+-- MIB for IEEE 802.1w Rapid Spanning Tree Protocol
+-- -------------------------------------------------------------
+
+IMPORTS
+
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, mib-2
+        FROM SNMPv2-SMI
+    TruthValue
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    dot1dStp, dot1dStpPortEntry
+        FROM BRIDGE-MIB;
+
+rstpMIB MODULE-IDENTITY
+    LAST-UPDATED "200512070000Z"
+    ORGANIZATION "IETF Bridge MIB Working Group"
+    CONTACT-INFO
+        "Email: Bridge-mib@ietf.org"
+    DESCRIPTION
+        "The Bridge MIB Extension module for managing devices
+         that support the Rapid Spanning Tree Protocol defined
+         by IEEE 802.1w.
+
+         Copyright (C) The Internet Society (2005).  This version of
+         this MIB module is part of RFC 4318; See the RFC itself for
+         full legal notices."
+
+    REVISION     "200512070000Z"
+    DESCRIPTION
+         "The initial version of this MIB module as published in
+          RFC 4318."
+    ::= { mib-2 134 }
+
+-- ---------------------------------------------------------- --
+-- subtrees in the RSTP-MIB
+-- ---------------------------------------------------------- --
+
+rstpNotifications OBJECT IDENTIFIER ::= { rstpMIB 0 }
+rstpObjects       OBJECT IDENTIFIER ::= { rstpMIB 1 }
+rstpConformance   OBJECT IDENTIFIER ::= { rstpMIB 2 }
+
+-- -------------------------------------------------------------
+-- Addition to the dot1dStp group
+-- -------------------------------------------------------------
+
+dot1dStpVersion OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    stpCompatible(0),
+                    rstp(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The version of Spanning Tree Protocol the bridge is
+         currently running.  The value 'stpCompatible(0)'
+         indicates the Spanning Tree Protocol specified in
+         IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
+         Spanning Tree Protocol specified in IEEE 802.1w and
+         clause 17 of 802.1D-2004.  The values are directly from
+         the IEEE standard.  New values may be defined as future
+         versions of the protocol become available.
+
+         The value of this object MUST be retained across
+         reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
+    DEFVAL      { rstp }
+    ::= { dot1dStp 16 }
+
+dot1dStpTxHoldCount OBJECT-TYPE
+    SYNTAX      Integer32 (1..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value used by the Port Transmit state machine to limit
+         the maximum transmission rate.
+
+         The value of this object MUST be retained across
+         reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1w clause 17.16.6"
+    DEFVAL      { 3 }
+    ::= { dot1dStp 17 }
+
+--
+-- { dot1dStp 18 } was used to represent dot1dStpPathCostDefault
+-- in an earlier version of this MIB.  It has since been
+-- obsoleted, and should not be used.
+--
+
+dot1dStpExtPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dStpExtPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains port-specific Rapid Spanning Tree
+         information."
+    ::= { dot1dStp 19 }
+
+dot1dStpExtPortEntry OBJECT-TYPE
+    SYNTAX      Dot1dStpExtPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of Rapid Spanning Tree information maintained by
+         each port."
+    AUGMENTS    { dot1dStpPortEntry }
+    ::= { dot1dStpExtPortTable 1 }
+
+Dot1dStpExtPortEntry ::=
+    SEQUENCE {
+        dot1dStpPortProtocolMigration
+            TruthValue,
+        dot1dStpPortAdminEdgePort
+            TruthValue,
+        dot1dStpPortOperEdgePort
+            TruthValue,
+        dot1dStpPortAdminPointToPoint
+            INTEGER,
+        dot1dStpPortOperPointToPoint
+            TruthValue,
+        dot1dStpPortAdminPathCost
+            Integer32
+    }
+
+dot1dStpPortProtocolMigration OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "When operating in RSTP (version 2) mode, writing true(1)
+         to this object forces this port to transmit RSTP BPDUs.
+         Any other operation on this object has no effect and
+         it always returns false(2) when read."
+    REFERENCE
+        "IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
+    ::= { dot1dStpExtPortEntry 1 }
+
+dot1dStpPortAdminEdgePort OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The administrative value of the Edge Port parameter.  A
+         value of true(1) indicates that this port should be
+         assumed as an edge-port, and a value of false(2) indicates
+         that this port should be assumed as a non-edge-port.
+
+         Setting this object will also cause the corresponding
+         instance of dot1dStpPortOperEdgePort to change to the
+         same value.  Note that even when this object's value
+         is true, the value of the corresponding instance of
+         dot1dStpPortOperEdgePort can be false if a BPDU has
+         been received.
+
+         The value of this object MUST be retained across
+         reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1t clause 14.8.2, 18.3.3"
+    ::= { dot1dStpExtPortEntry 2 }
+
+dot1dStpPortOperEdgePort OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The operational value of the Edge Port parameter.  The
+         object is initialized to the value of the corresponding
+         instance of dot1dStpPortAdminEdgePort.  When the
+         corresponding instance of dot1dStpPortAdminEdgePort is
+         set, this object will be changed as well.  This object
+         will also be changed to false on reception of a BPDU."
+    REFERENCE
+        "IEEE 802.1t clause 14.8.2, 18.3.4"
+    ::= { dot1dStpExtPortEntry 3 }
+
+dot1dStpPortAdminPointToPoint OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    forceTrue(0),
+                    forceFalse(1),
+                    auto(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The administrative point-to-point status of the LAN segment
+         attached to this port, using the enumeration values of the
+         IEEE 802.1w clause.  A value of forceTrue(0) indicates
+         that this port should always be treated as if it is
+         connected to a point-to-point link.  A value of
+         forceFalse(1) indicates that this port should be treated as
+         having a shared media connection.  A value of auto(2)
+         indicates that this port is considered to have a
+         point-to-point link if it is an Aggregator and all of its
+
+         members are aggregatable, or if the MAC entity
+         is configured for full duplex operation, either through
+         auto-negotiation or by management means.  Manipulating this
+         object changes the underlying adminPortToPortMAC.
+
+         The value of this object MUST be retained across
+         reinitializations of the management system."
+   REFERENCE
+       "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
+   ::= { dot1dStpExtPortEntry 4 }
+
+dot1dStpPortOperPointToPoint OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The operational point-to-point status of the LAN segment
+         attached to this port.  It indicates whether a port is
+         considered to have a point-to-point connection.
+         If adminPointToPointMAC is set to auto(2), then the value
+         of operPointToPointMAC is determined in accordance with the
+         specific procedures defined for the MAC entity concerned,
+         as defined in IEEE 802.1w, clause 6.5.  The value is
+         determined dynamically; that is, it is re-evaluated whenever
+         the value of adminPointToPointMAC changes, and whenever
+         the specific procedures defined for the MAC entity evaluate
+         a change in its point-to-point status."
+    REFERENCE
+        "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
+    ::= { dot1dStpExtPortEntry 5 }
+
+dot1dStpPortAdminPathCost OBJECT-TYPE
+    SYNTAX      Integer32 (0..200000000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The administratively assigned value for the contribution
+         of this port to the path cost of paths toward the spanning
+         tree root.
+
+         Writing a value of '0' assigns the automatically calculated
+         default Path Cost value to the port.  If the default Path
+         Cost is being used, this object returns '0' when read.
+
+         This complements the object dot1dStpPortPathCost or
+         dot1dStpPortPathCost32, which returns the operational value
+         of the path cost.
+
+         The value of this object MUST be retained across
+         reinitializations of the management system."
+    REFERENCE
+        "IEEE 802.1D-1998: Section 8.5.5.3"
+    ::= { dot1dStpExtPortEntry 6 }
+
+-- -------------------------------------------------------------
+-- rstpMIB - Conformance Information
+-- -------------------------------------------------------------
+
+rstpGroups OBJECT IDENTIFIER ::= { rstpConformance 1 }
+
+rstpCompliances OBJECT IDENTIFIER ::= { rstpConformance 2 }
+
+-- -------------------------------------------------------------
+-- Units of conformance
+-- -------------------------------------------------------------
+
+rstpBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStpVersion,
+        dot1dStpTxHoldCount
+    }
+    STATUS      current
+    DESCRIPTION
+        "Rapid Spanning Tree information for the bridge."
+    ::= { rstpGroups 1 }
+
+rstpPortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPortProtocolMigration,
+        dot1dStpPortAdminEdgePort,
+        dot1dStpPortOperEdgePort,
+        dot1dStpPortAdminPointToPoint,
+        dot1dStpPortOperPointToPoint,
+        dot1dStpPortAdminPathCost
+    }
+    STATUS      current
+    DESCRIPTION
+        "Rapid Spanning Tree information for individual ports."
+    ::= { rstpGroups 2 }
+
+-- -------------------------------------------------------------
+-- Compliance statements
+-- -------------------------------------------------------------
+
+rstpCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for device support of Rapid
+         Spanning Tree Protocol (RSTP) bridging services."
+    MODULE
+        MANDATORY-GROUPS {
+            rstpBridgeGroup,
+            rstpPortGroup
+        }
+    ::= { rstpCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/RSVP-MIB.mib b/snmp_builder/mibs/RSVP-MIB.mib
new file mode 100644
index 0000000..4c42ba6
--- /dev/null
+++ b/snmp_builder/mibs/RSVP-MIB.mib
@@ -0,0 +1,2660 @@
+RSVP-MIB DEFINITIONS ::= BEGIN
+
+        IMPORTS
+                MODULE-IDENTITY, OBJECT-TYPE, Gauge32,
+                NOTIFICATION-TYPE, Integer32, mib-2
+                                                    FROM SNMPv2-SMI
+                TEXTUAL-CONVENTION, TruthValue, RowStatus,
+                TimeStamp, TestAndIncr, TimeInterval
+                                                    FROM SNMPv2-TC
+                MODULE-COMPLIANCE, OBJECT-GROUP,
+                NOTIFICATION-GROUP                  FROM SNMPv2-CONF
+                Port, SessionNumber, SessionType,
+                Protocol, QosService, intSrvFlowStatus,
+                MessageSize, BitRate, BurstSize
+                                            FROM INTEGRATED-SERVICES-MIB
+                ifIndex, InterfaceIndex             FROM IF-MIB;
+
+    rsvp MODULE-IDENTITY
+            LAST-UPDATED "9511030500Z" -- Thu Aug 28 09:03:53 PDT 1997
+            ORGANIZATION "IETF RSVP Working Group"
+            CONTACT-INFO
+           "       Fred Baker
+           Postal: Cisco Systems
+                   519 Lado Drive
+                   Santa Barbara, California 93111
+           Tel:    +1 805 681 0115
+           E-Mail: fred@cisco.com
+
+                   John Krawczyk
+           Postal: ArrowPoint Communications
+                   235 Littleton Road
+                   Westford, Massachusetts 01886
+           Tel:    +1 508 692 5875
+           E-Mail: jjk@tiac.net
+
+                   Arun Sastry
+           Postal: Cisco Systems
+                   210 W. Tasman Drive
+                   San Jose, California 95134
+           Tel:    +1 408 526 7685
+           E-Mail: arun@cisco.com"
+       DESCRIPTION
+          "The MIB module to describe the RSVP Protocol"
+      ::= { mib-2 51 }
+
+  rsvpObjects               OBJECT IDENTIFIER
+                            ::= { rsvp 1 } -- tables
+  rsvpGenObjects            OBJECT IDENTIFIER
+                            ::= { rsvp 2 } -- global objects
+  rsvpNotificationsPrefix   OBJECT IDENTIFIER
+                            ::= { rsvp 3 } -- traps
+  rsvpConformance           OBJECT IDENTIFIER
+                            ::= { rsvp 4 } -- conformance
+
+    RsvpEncapsulation ::= TEXTUAL-CONVENTION
+         STATUS   current
+         DESCRIPTION
+           "This indicates the encapsulation that an  RSVP
+           Neighbor is perceived to be using."
+        SYNTAX   INTEGER {
+                   ip (1),   -- IP Protocol 46
+                   udp (2),  -- UDP Encapsulation
+                   both (3)  -- neighbor is using both encapsulations
+                 }
+
+    RefreshInterval ::= TEXTUAL-CONVENTION
+         DISPLAY-HINT "d"
+         STATUS   current
+         DESCRIPTION
+           "The number of milliseconds that  are  expected
+           to elapse between refreshes of path or reserva-
+           tion state.  Unrefreshed  Path  or  reservation
+           state is removed after a small multiple of this
+           period."
+        SYNTAX   INTEGER (0..'7FFFFFFF'h)
+
+--      The RSVP Session Statistics Database displays statistics
+--      relating to the number of senders and receivers in each
+--      session.
+
+    rsvpSessionTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpSessionEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "A table of all sessions seen by a  given  sys-
+           tem."
+       ::= { rsvpObjects 1 }
+
+    rsvpSessionEntry OBJECT-TYPE
+        SYNTAX      RsvpSessionEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "A single session seen by a given system."
+       INDEX { rsvpSessionNumber }
+       ::= { rsvpSessionTable 1 }
+
+    RsvpSessionEntry ::=
+        SEQUENCE {
+        rsvpSessionNumber           SessionNumber,
+        rsvpSessionType             SessionType,
+        rsvpSessionDestAddr         OCTET STRING,
+        rsvpSessionDestAddrLength   INTEGER,
+        rsvpSessionProtocol         Protocol,
+        rsvpSessionPort             Port,
+        rsvpSessionSenders          Gauge32,
+        rsvpSessionReceivers        Gauge32,
+        rsvpSessionRequests         Gauge32
+        }
+
+    rsvpSessionNumber OBJECT-TYPE
+        SYNTAX      SessionNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The number of this session.  This is for  SNMP
+
+           Indexing  purposes  only and has no relation to
+           any protocol value."
+       ::= { rsvpSessionEntry 1 }
+
+    rsvpSessionType OBJECT-TYPE
+        SYNTAX      SessionType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The type of session (IP4, IP6, IP6  with  flow
+           information, etc)."
+       ::= { rsvpSessionEntry 2 }
+
+    rsvpSessionDestAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The destination address used by all senders in
+           this  session.   This object may not be changed
+           when the value of the RowStatus object is  'ac-
+           tive'."
+       ::= { rsvpSessionEntry 3 }
+
+    rsvpSessionDestAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The CIDR prefix length of the session address,
+           which  is  32  for  IP4  host and multicast ad-
+           dresses, and 128 for IP6 addresses.   This  ob-
+           ject  may  not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpSessionEntry 4 }
+
+    rsvpSessionProtocol OBJECT-TYPE
+        SYNTAX      Protocol
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The IP Protocol used by  this  session.   This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpSessionEntry 5 }
+
+    rsvpSessionPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used as a  destina-
+           tion  port for all senders in this session.  If
+           the IP protocol in use, specified  by  rsvpSen-
+           derProtocol,  is  50  (ESP)  or  51  (AH), this
+           represents a virtual destination  port  number.
+           A  value of zero indicates that the IP protocol
+           in use does not have ports.   This  object  may
+           not  be changed when the value of the RowStatus
+           object is 'active'."
+       ::= { rsvpSessionEntry 6 }
+
+    rsvpSessionSenders OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of distinct senders currently known
+           to be part of this session."
+       ::= { rsvpSessionEntry 7 }
+
+    rsvpSessionReceivers OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of reservations being requested  of
+           this system for this session."
+       ::= { rsvpSessionEntry 8 }
+
+    rsvpSessionRequests OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of reservation requests this system
+           is sending upstream for this session."
+       ::= { rsvpSessionEntry 9 }
+
+    rsvpBadPackets OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "This object keeps a count of the number of bad
+           RSVP packets received."
+       ::= { rsvpGenObjects 1 }
+
+--      The RSVP Session Sender Database contains the information
+--      displayed by senders regarding their potential contribution
+--      to session data content. It is in essence a list of the
+--      valid PATH messages that the RSVP Router or Host is receiving.
+
+    rsvpSenderNewIndex OBJECT-TYPE
+        SYNTAX      TestAndIncr
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+           "This  object  is  used  to  assign  values  to
+           rsvpSenderNumber  as described in 'Textual Con-
+           ventions  for  SNMPv2'.   The  network  manager
+           reads  the  object,  and  then writes the value
+           back in the SET that creates a new instance  of
+           rsvpSenderEntry.   If  the  SET  fails with the
+           code 'inconsistentValue', then the process must
+           be  repeated; If the SET succeeds, then the ob-
+           ject is incremented, and the  new  instance  is
+           created according to the manager's directions."
+       ::= { rsvpGenObjects 2 }
+
+    rsvpSenderTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpSenderEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the  state  information
+           displayed by senders in PATH messages."
+       ::= { rsvpObjects 2 }
+
+    rsvpSenderEntry OBJECT-TYPE
+        SYNTAX      RsvpSenderEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the  state  information
+           displayed by a single sender's PATH message."
+       INDEX { rsvpSessionNumber, rsvpSenderNumber }
+       ::= { rsvpSenderTable 1 }
+
+RsvpSenderEntry ::=
+
+    SEQUENCE {
+        rsvpSenderNumber                        SessionNumber,
+        rsvpSenderType                          SessionType,
+        rsvpSenderDestAddr                      OCTET STRING,
+        rsvpSenderAddr                          OCTET STRING,
+        rsvpSenderDestAddrLength                INTEGER,
+        rsvpSenderAddrLength                    INTEGER,
+        rsvpSenderProtocol                      Protocol,
+        rsvpSenderDestPort                      Port,
+        rsvpSenderPort                          Port,
+        rsvpSenderFlowId                        INTEGER,
+        rsvpSenderHopAddr                       OCTET STRING,
+        rsvpSenderHopLih                        Integer32,
+        rsvpSenderInterface                     InterfaceIndex,
+        rsvpSenderTSpecRate                     BitRate,
+        rsvpSenderTSpecPeakRate                 BitRate,
+        rsvpSenderTSpecBurst                    BurstSize,
+        rsvpSenderTSpecMinTU                    MessageSize,
+        rsvpSenderTSpecMaxTU                    MessageSize,
+        rsvpSenderInterval                      RefreshInterval,
+        rsvpSenderRSVPHop                       TruthValue,
+        rsvpSenderLastChange                    TimeStamp,
+        rsvpSenderPolicy                        OCTET STRING,
+        rsvpSenderAdspecBreak                   TruthValue,
+        rsvpSenderAdspecHopCount                INTEGER,
+        rsvpSenderAdspecPathBw                  BitRate,
+        rsvpSenderAdspecMinLatency              Integer32,
+        rsvpSenderAdspecMtu                     INTEGER,
+        rsvpSenderAdspecGuaranteedSvc           TruthValue,
+        rsvpSenderAdspecGuaranteedBreak         TruthValue,
+        rsvpSenderAdspecGuaranteedCtot          Integer32,
+        rsvpSenderAdspecGuaranteedDtot          Integer32,
+        rsvpSenderAdspecGuaranteedCsum          Integer32,
+        rsvpSenderAdspecGuaranteedDsum          Integer32,
+        rsvpSenderAdspecGuaranteedHopCount      INTEGER,
+        rsvpSenderAdspecGuaranteedPathBw        BitRate,
+        rsvpSenderAdspecGuaranteedMinLatency    Integer32,
+        rsvpSenderAdspecGuaranteedMtu           INTEGER,
+        rsvpSenderAdspecCtrlLoadSvc             TruthValue,
+        rsvpSenderAdspecCtrlLoadBreak           TruthValue,
+        rsvpSenderAdspecCtrlLoadHopCount        INTEGER,
+        rsvpSenderAdspecCtrlLoadPathBw          BitRate,
+        rsvpSenderAdspecCtrlLoadMinLatency      Integer32,
+        rsvpSenderAdspecCtrlLoadMtu             INTEGER,
+        rsvpSenderStatus                        RowStatus,
+        rsvpSenderTTL                           INTEGER
+    }
+
+    rsvpSenderNumber OBJECT-TYPE
+        SYNTAX      SessionNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The number of this sender.  This is  for  SNMP
+           Indexing  purposes  only and has no relation to
+           any protocol value."
+       ::= { rsvpSenderEntry 1 }
+
+    rsvpSenderType OBJECT-TYPE
+        SYNTAX      SessionType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The type of session (IP4, IP6, IP6  with  flow
+           information, etc)."
+       ::= { rsvpSenderEntry 2 }
+
+    rsvpSenderDestAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The destination address used by all senders in
+           this  session.   This object may not be changed
+           when the value of the RowStatus object is  'ac-
+           tive'."
+       ::= { rsvpSenderEntry 3 }
+
+    rsvpSenderAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The source address used by this sender in this
+           session.   This  object may not be changed when
+           the value of the RowStatus object is 'active'."
+       ::= { rsvpSenderEntry 4 }
+
+    rsvpSenderDestAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The length of the destination address in bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpSenderEntry 5 }
+
+    rsvpSenderAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The length of the sender's  address  in  bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpSenderEntry 6 }
+
+    rsvpSenderProtocol OBJECT-TYPE
+        SYNTAX      Protocol
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The IP Protocol used by  this  session.   This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpSenderEntry 7 }
+
+    rsvpSenderDestPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used as a  destina-
+           tion  port for all senders in this session.  If
+           the IP protocol in use, specified  by  rsvpSen-
+           derProtocol,  is  50  (ESP)  or  51  (AH), this
+           represents a virtual destination  port  number.
+           A  value of zero indicates that the IP protocol
+           in use does not have ports.   This  object  may
+           not  be changed when the value of the RowStatus
+           object is 'active'."
+       ::= { rsvpSenderEntry 8 }
+
+    rsvpSenderPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used  as  a  source
+           port  for  this sender in this session.  If the
+           IP protocol in use, specified by rsvpSenderPro-
+           tocol is 50 (ESP) or 51 (AH), this represents a
+           generalized port identifier (GPI).  A value  of
+           zero indicates that the IP protocol in use does
+           not have ports.  This object may not be changed
+           when  the value of the RowStatus object is 'ac-
+           tive'."
+       ::= { rsvpSenderEntry 9 }
+
+    rsvpSenderFlowId OBJECT-TYPE
+        SYNTAX      INTEGER (0..16777215)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The flow ID that  this  sender  is  using,  if
+           this  is  an IPv6 session."
+       ::= { rsvpSenderEntry 10 }
+
+    rsvpSenderHopAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The address used  by  the  previous  RSVP  hop
+           (which may be the original sender)."
+       ::= { rsvpSenderEntry 11 }
+
+    rsvpSenderHopLih OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Logical Interface Handle used by the  pre-
+           vious  RSVP  hop  (which  may  be  the original
+           sender)."
+       ::= { rsvpSenderEntry 12 }
+
+    rsvpSenderInterface OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The ifIndex value of the  interface  on  which
+           this PATH message was most recently received."
+       ::= { rsvpSenderEntry 13 }
+
+    rsvpSenderTSpecRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Average Bit  Rate  of  the  sender's  data
+           stream.   Within  a transmission burst, the ar-
+           rival rate may be as fast  as  rsvpSenderTSpec-
+           PeakRate  (if  supported by the service model);
+           however, averaged across two or more burst  in-
+           tervals,  the  rate  should not exceed rsvpSen-
+           derTSpecRate.
+
+           Note that this is a prediction, often based  on
+           the  general  capability  of a type of codec or
+           particular encoding; the measured average  rate
+           may be significantly lower."
+       ::= { rsvpSenderEntry 14 }
+
+    rsvpSenderTSpecPeakRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Peak Bit Rate of the sender's data stream.
+           Traffic  arrival is not expected to exceed this
+           rate at any time, apart  from  the  effects  of
+           jitter in the network.  If not specified in the
+           TSpec, this returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 15 }
+
+    rsvpSenderTSpecBurst OBJECT-TYPE
+        SYNTAX      BurstSize
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The size of the largest  burst  expected  from
+           the sender at a time."
+       ::= { rsvpSenderEntry 16 }
+
+    rsvpSenderTSpecMinTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The minimum message size for  this  flow.  The
+           policing  algorithm will treat smaller messages
+           as though they are this size."
+       ::= { rsvpSenderEntry 17 }
+
+    rsvpSenderTSpecMaxTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The maximum message size for  this  flow.  The
+           admission  algorithm  will  reject TSpecs whose
+           Maximum Transmission Unit, plus  the  interface
+           headers, exceed the interface MTU."
+       ::= { rsvpSenderEntry 18 }
+
+    rsvpSenderInterval OBJECT-TYPE
+        SYNTAX      RefreshInterval
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The interval between refresh messages  as  ad-
+
+           vertised by the Previous Hop."
+       ::= { rsvpSenderEntry 19 }
+
+    rsvpSenderRSVPHop OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the node believes that  the  previous
+           IP  hop is an RSVP hop.  If FALSE, the node be-
+           lieves that the previous IP hop may not  be  an
+           RSVP hop."
+       ::= { rsvpSenderEntry 20 }
+
+    rsvpSenderLastChange OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The time of the last change in this PATH  mes-
+           sage;  This is either the first time it was re-
+           ceived or the time of the most recent change in
+           parameters."
+       ::= { rsvpSenderEntry 21 }
+
+    rsvpSenderPolicy OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..65536))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The contents of the policy  object,  displayed
+           as an uninterpreted string of octets, including
+           the object header.  In the absence of  such  an
+           object, this should be of zero length."
+       ::= { rsvpSenderEntry 22 }
+
+    rsvpSenderAdspecBreak OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The global break bit general  characterization
+           parameter  from  the ADSPEC.  If TRUE, at least
+           one non-IS hop was detected in  the  path.   If
+
+           FALSE, no non-IS hops were detected."
+       ::= { rsvpSenderEntry 23 }
+
+    rsvpSenderAdspecHopCount OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The hop count general characterization parame-
+           ter  from  the  ADSPEC.   A  return  of zero or
+           noSuchValue indicates one of the following con-
+           ditions:
+
+              the invalid bit was set
+              the parameter was not present"
+       ::= { rsvpSenderEntry 24 }
+
+    rsvpSenderAdspecPathBw OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The path bandwidth estimate general character-
+           ization parameter from the ADSPEC.  A return of
+           zero or noSuchValue indicates one of  the  fol-
+           lowing conditions:
+
+              the invalid bit was set
+              the parameter was not present"
+       ::= { rsvpSenderEntry 25 }
+
+    rsvpSenderAdspecMinLatency OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The minimum path latency general characteriza-
+           tion  parameter  from  the ADSPEC.  A return of
+           zero or noSuchValue indicates one of  the  fol-
+           lowing conditions:
+
+              the invalid bit was set
+              the parameter was not present"
+       ::= { rsvpSenderEntry 26 }
+
+    rsvpSenderAdspecMtu OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The composed Maximum Transmission Unit general
+           characterization  parameter from the ADSPEC.  A
+           return of zero or noSuchValue indicates one  of
+           the following conditions:
+
+              the invalid bit was set
+              the parameter was not present"
+       ::= { rsvpSenderEntry 27 }
+
+    rsvpSenderAdspecGuaranteedSvc OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the ADSPEC contains a Guaranteed Ser-
+           vice  fragment.   If FALSE, the ADSPEC does not
+           contain a Guaranteed Service fragment."
+       ::= { rsvpSenderEntry 28 }
+
+    rsvpSenderAdspecGuaranteedBreak OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the Guaranteed Service  fragment  has
+           its  'break'  bit  set,  indicating that one or
+           more nodes along the path do  not  support  the
+           guaranteed  service.   If  FALSE,  and rsvpSen-
+           derAdspecGuaranteedSvc is TRUE, the 'break' bit
+           is not set.
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns FALSE or noSuchValue."
+       ::= { rsvpSenderEntry 29 }
+
+    rsvpSenderAdspecGuaranteedCtot OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is   the  end-to-end  composed  value  for  the
+           guaranteed service 'C' parameter.  A return  of
+           zero  or  noSuchValue indicates one of the fol-
+           lowing conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 30 }
+
+    rsvpSenderAdspecGuaranteedDtot OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is   the  end-to-end  composed  value  for  the
+           guaranteed service 'D' parameter.  A return  of
+           zero  or  noSuchValue indicates one of the fol-
+           lowing conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 31 }
+
+    rsvpSenderAdspecGuaranteedCsum OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is  the  composed value for the guaranteed ser-
+
+           vice 'C' parameter  since  the  last  reshaping
+           point.   A  return of zero or noSuchValue indi-
+           cates one of the following conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 32 }
+
+    rsvpSenderAdspecGuaranteedDsum OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is  the  composed value for the guaranteed ser-
+           vice 'D' parameter  since  the  last  reshaping
+           point.   A  return of zero or noSuchValue indi-
+           cates one of the following conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 33 }
+
+    rsvpSenderAdspecGuaranteedHopCount OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is  the  service-specific  override  of the hop
+           count general characterization  parameter  from
+           the  ADSPEC.   A  return of zero or noSuchValue
+           indicates one of the following conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 34 }
+
+    rsvpSenderAdspecGuaranteedPathBw OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is  the  service-specific  override of the path
+           bandwidth  estimate  general   characterization
+           parameter from the ADSPEC.  A return of zero or
+           noSuchValue indicates one of the following con-
+           ditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 35 }
+
+    rsvpSenderAdspecGuaranteedMinLatency OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is the service-specific override of the minimum
+           path latency general characterization parameter
+           from  the  ADSPEC.  A return of zero or noSuch-
+           Value indicates one  of  the  following  condi-
+           tions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 36 }
+
+    rsvpSenderAdspecGuaranteedMtu OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecGuaranteedSvc is TRUE, this
+           is  the  service-specific  override of the com-
+           posed Maximum Transmission Unit general charac-
+           terization parameter from the ADSPEC.  A return
+           of zero or noSuchValue  indicates  one  of  the
+           following conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecGuaranteedSvc is FALSE, this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 37 }
+
+    rsvpSenderAdspecCtrlLoadSvc OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the ADSPEC contains a Controlled Load
+           Service  fragment.   If  FALSE, the ADSPEC does
+           not contain a  Controlled  Load  Service  frag-
+           ment."
+       ::= { rsvpSenderEntry 38 }
+
+    rsvpSenderAdspecCtrlLoadBreak OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the Controlled Load Service  fragment
+           has its 'break' bit set, indicating that one or
+           more nodes along the path do  not  support  the
+           controlled   load   service.    If  FALSE,  and
+           rsvpSenderAdspecCtrlLoadSvc   is   TRUE,    the
+           'break' bit is not set.
+
+           If rsvpSenderAdspecCtrlLoadSvc is  FALSE,  this
+           returns FALSE or noSuchValue."
+       ::= { rsvpSenderEntry 39 }
+
+    rsvpSenderAdspecCtrlLoadHopCount OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecCtrlLoadSvc is  TRUE,  this
+           is  the  service-specific  override  of the hop
+           count general characterization  parameter  from
+           the  ADSPEC.   A  return of zero or noSuchValue
+           indicates one of the following conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecCtrlLoadSvc is  FALSE,  this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 40 }
+
+    rsvpSenderAdspecCtrlLoadPathBw OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecCtrlLoadSvc is  TRUE,  this
+           is  the  service-specific  override of the path
+           bandwidth  estimate  general   characterization
+           parameter from the ADSPEC.  A return of zero or
+           noSuchValue indicates one of the following con-
+           ditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecCtrlLoadSvc is  FALSE,  this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 41 }
+
+    rsvpSenderAdspecCtrlLoadMinLatency OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecCtrlLoadSvc is  TRUE,  this
+
+           is the service-specific override of the minimum
+           path latency general characterization parameter
+           from  the  ADSPEC.  A return of zero or noSuch-
+           Value indicates one  of  the  following  condi-
+           tions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecCtrlLoadSvc is  FALSE,  this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 42 }
+
+    rsvpSenderAdspecCtrlLoadMtu OBJECT-TYPE
+        SYNTAX      INTEGER (0..65535)
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If rsvpSenderAdspecCtrlLoadSvc is  TRUE,  this
+           is  the  service-specific  override of the com-
+           posed Maximum Transmission Unit general charac-
+           terization parameter from the ADSPEC.  A return
+           of zero or noSuchValue  indicates  one  of  the
+           following conditions:
+
+              the invalid bit was set
+              the parameter was not present
+
+           If rsvpSenderAdspecCtrlLoadSvc is  FALSE,  this
+           returns zero or noSuchValue."
+       ::= { rsvpSenderEntry 43 }
+
+    rsvpSenderStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'active' for all active PATH  messages.   This
+           object  may  be used to install static PATH in-
+           formation or delete PATH information."
+       ::= { rsvpSenderEntry 44 }
+
+    rsvpSenderTTL OBJECT-TYPE
+        SYNTAX      INTEGER (0..255)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The TTL value in the RSVP header that was last
+           received."
+       ::= { rsvpSenderEntry 45 }
+
+    rsvpSenderOutInterfaceTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpSenderOutInterfaceEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "List of outgoing interfaces that PATH messages
+           use.  The  ifIndex  is the ifIndex value of the
+           egress interface."
+       ::= { rsvpObjects 3 }
+
+    rsvpSenderOutInterfaceEntry OBJECT-TYPE
+        SYNTAX      RsvpSenderOutInterfaceEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "List of outgoing interfaces that a  particular
+           PATH message has."
+       INDEX { rsvpSessionNumber, rsvpSenderNumber, ifIndex }
+       ::= { rsvpSenderOutInterfaceTable 1 }
+
+RsvpSenderOutInterfaceEntry ::=
+    SEQUENCE {
+        rsvpSenderOutInterfaceStatus            RowStatus
+    }
+
+    rsvpSenderOutInterfaceStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "'active' for all active PATH messages."
+       ::= { rsvpSenderOutInterfaceEntry 1 }
+
+--      The RSVP Reservation Requests Received Table contains the
+--      information displayed by receivers regarding their needs with
+--      respect to sessions and senders. It is in essence a list of the
+--      valid RESV messages that the RSVP Router or Host is receiving.
+
+    rsvpResvNewIndex OBJECT-TYPE
+        SYNTAX      TestAndIncr
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+           "This  object  is  used  to  assign  values  to
+           rsvpResvNumber as described in 'Textual Conven-
+           tions for SNMPv2'.  The network  manager  reads
+           the  object,  and then writes the value back in
+           the  SET  that  creates  a  new   instance   of
+           rsvpResvEntry.   If the SET fails with the code
+           'inconsistentValue', then the process  must  be
+           repeated;  If the SET succeeds, then the object
+           is incremented, and the new instance is created
+           according to the manager's directions."
+       ::= { rsvpGenObjects 3 }
+
+    rsvpResvTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpResvEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the  state  information
+           displayed by receivers in RESV messages."
+       ::= { rsvpObjects 4 }
+
+    rsvpResvEntry OBJECT-TYPE
+        SYNTAX      RsvpResvEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the  state  information
+           displayed  by  a single receiver's RESV message
+           concerning a single sender."
+       INDEX { rsvpSessionNumber, rsvpResvNumber }
+       ::= { rsvpResvTable 1 }
+
+    RsvpResvEntry ::=
+        SEQUENCE {
+            rsvpResvNumber                  SessionNumber,
+            rsvpResvType                    SessionType,
+            rsvpResvDestAddr                OCTET STRING,
+            rsvpResvSenderAddr              OCTET STRING,
+            rsvpResvDestAddrLength          INTEGER,
+            rsvpResvSenderAddrLength        INTEGER,
+            rsvpResvProtocol                Protocol,
+            rsvpResvDestPort                Port,
+            rsvpResvPort                    Port,
+            rsvpResvHopAddr                 OCTET STRING,
+            rsvpResvHopLih                  Integer32,
+            rsvpResvInterface               InterfaceIndex,
+            rsvpResvService                 QosService,
+            rsvpResvTSpecRate               BitRate,
+            rsvpResvTSpecPeakRate           BitRate,
+            rsvpResvTSpecBurst              BurstSize,
+            rsvpResvTSpecMinTU              MessageSize,
+            rsvpResvTSpecMaxTU              MessageSize,
+            rsvpResvRSpecRate               BitRate,
+            rsvpResvRSpecSlack              Integer32,
+            rsvpResvInterval                RefreshInterval,
+            rsvpResvScope                   OCTET STRING,
+            rsvpResvShared                  TruthValue,
+            rsvpResvExplicit                TruthValue,
+            rsvpResvRSVPHop                 TruthValue,
+            rsvpResvLastChange              TimeStamp,
+            rsvpResvPolicy                  OCTET STRING,
+            rsvpResvStatus                  RowStatus,
+            rsvpResvTTL                     INTEGER,
+            rsvpResvFlowId                  INTEGER
+        }
+
+    rsvpResvNumber OBJECT-TYPE
+        SYNTAX      SessionNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The number of this reservation request.   This
+           is  for  SNMP Indexing purposes only and has no
+           relation to any protocol value."
+       ::= { rsvpResvEntry 1 }
+
+    rsvpResvType OBJECT-TYPE
+        SYNTAX      SessionType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The type of session (IP4, IP6, IP6  with  flow
+           information, etc)."
+       ::= { rsvpResvEntry 2 }
+
+    rsvpResvDestAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The destination address used by all senders in
+           this  session.   This object may not be changed
+           when the value of the RowStatus object is  'ac-
+           tive'."
+       ::= { rsvpResvEntry 3 }
+
+    rsvpResvSenderAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The source address of the sender  selected  by
+           this  reservation.  The value of all zeroes in-
+           dicates 'all senders'.  This object may not  be
+           changed  when the value of the RowStatus object
+           is 'active'."
+       ::= { rsvpResvEntry 4 }
+
+    rsvpResvDestAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The length of the destination address in bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvEntry 5 }
+
+    rsvpResvSenderAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The length of the sender's  address  in  bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvEntry 6 }
+
+    rsvpResvProtocol OBJECT-TYPE
+        SYNTAX      Protocol
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The IP Protocol used by  this  session.   This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvEntry 7 }
+
+    rsvpResvDestPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used as a  destina-
+           tion  port for all senders in this session.  If
+           the  IP   protocol   in   use,   specified   by
+           rsvpResvProtocol,  is 50 (ESP) or 51 (AH), this
+           represents a virtual destination  port  number.
+           A  value of zero indicates that the IP protocol
+           in use does not have ports.   This  object  may
+           not  be changed when the value of the RowStatus
+           object is 'active'."
+       ::= { rsvpResvEntry 8 }
+
+    rsvpResvPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used  as  a  source
+           port  for  this sender in this session.  If the
+           IP protocol in use, specified by rsvpResvProto-
+           col  is  50 (ESP) or 51 (AH), this represents a
+           generalized port identifier (GPI).  A value  of
+           zero indicates that the IP protocol in use does
+           not have ports.  This object may not be changed
+           when  the value of the RowStatus object is 'ac-
+           tive'."
+       ::= { rsvpResvEntry 9 }
+
+    rsvpResvHopAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The address used by the next RSVP  hop  (which
+           may be the ultimate receiver)."
+       ::= { rsvpResvEntry 10 }
+
+    rsvpResvHopLih OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Logical Interface Handle received from the
+           previous  RSVP  hop  (which may be the ultimate
+           receiver)."
+       ::= { rsvpResvEntry 11 }
+
+    rsvpResvInterface OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The ifIndex value of the  interface  on  which
+           this RESV message was most recently received."
+       ::= { rsvpResvEntry 12 }
+
+    rsvpResvService OBJECT-TYPE
+        SYNTAX      QosService
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The QoS Service  classification  requested  by
+           the receiver."
+       ::= { rsvpResvEntry 13 }
+
+    rsvpResvTSpecRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Average Bit  Rate  of  the  sender's  data
+
+           stream.   Within  a transmission burst, the ar-
+           rival rate may be  as  fast  as  rsvpResvTSpec-
+           PeakRate  (if  supported by the service model);
+           however, averaged across two or more burst  in-
+           tervals,    the    rate   should   not   exceed
+           rsvpResvTSpecRate.
+
+           Note that this is a prediction, often based  on
+           the  general  capability  of a type of codec or
+           particular encoding; the measured average  rate
+           may be significantly lower."
+       ::= { rsvpResvEntry 14 }
+
+    rsvpResvTSpecPeakRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The Peak Bit Rate of the sender's data stream.
+           Traffic  arrival is not expected to exceed this
+           rate at any time, apart  from  the  effects  of
+           jitter in the network.  If not specified in the
+           TSpec, this returns zero or noSuchValue."
+       ::= { rsvpResvEntry 15 }
+
+    rsvpResvTSpecBurst OBJECT-TYPE
+        SYNTAX      BurstSize
+        UNITS       "bytes"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The size of the largest  burst  expected  from
+           the sender at a time.
+
+           If this is less than  the  sender's  advertised
+           burst  size, the receiver is asking the network
+           to provide flow pacing  beyond  what  would  be
+           provided  under normal circumstances. Such pac-
+           ing is at the network's option."
+       ::= { rsvpResvEntry 16 }
+
+    rsvpResvTSpecMinTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The minimum message size for  this  flow.  The
+           policing  algorithm will treat smaller messages
+           as though they are this size."
+       ::= { rsvpResvEntry 17 }
+
+    rsvpResvTSpecMaxTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The maximum message size for  this  flow.  The
+           admission  algorithm  will  reject TSpecs whose
+           Maximum Transmission Unit, plus  the  interface
+           headers, exceed the interface MTU."
+       ::= { rsvpResvEntry 18 }
+
+    rsvpResvRSpecRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If the requested  service  is  Guaranteed,  as
+           specified   by  rsvpResvService,  this  is  the
+           clearing rate that is being requested.   Other-
+           wise,  it  is  zero,  or  the  agent may return
+           noSuchValue."
+       ::= { rsvpResvEntry 19 }
+
+    rsvpResvRSpecSlack OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If the requested  service  is  Guaranteed,  as
+           specified by rsvpResvService, this is the delay
+           slack.  Otherwise, it is zero, or the agent may
+           return noSuchValue."
+       ::= { rsvpResvEntry 20 }
+
+    rsvpResvInterval OBJECT-TYPE
+        SYNTAX      RefreshInterval
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The interval between refresh messages  as  ad-
+           vertised by the Next Hop."
+       ::= { rsvpResvEntry 21 }
+
+    rsvpResvScope OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..65536))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The contents of the scope object, displayed as
+           an  uninterpreted  string  of octets, including
+           the object header.  In the absence of  such  an
+           object, this should be of zero length.
+
+           If the length  is  non-zero,  this  contains  a
+           series of IP4 or IP6 addresses."
+       ::= { rsvpResvEntry 22 }
+
+    rsvpResvShared OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, a reservation shared among senders is
+           requested.  If FALSE, a reservation specific to
+           this sender is requested."
+       ::= { rsvpResvEntry 23 }
+
+    rsvpResvExplicit OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, individual senders are  listed  using
+           Filter  Specifications.   If FALSE, all senders
+           are implicitly selected.  The Scope Object will
+           contain  a list of senders that need to receive
+           this reservation request  for  the  purpose  of
+           routing the RESV message."
+       ::= { rsvpResvEntry 24 }
+
+    rsvpResvRSVPHop OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the node believes that  the  previous
+           IP  hop is an RSVP hop.  If FALSE, the node be-
+           lieves that the previous IP hop may not  be  an
+           RSVP hop."
+       ::= { rsvpResvEntry 25 }
+
+    rsvpResvLastChange OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The time of the last change in  this  reserva-
+           tion  request; This is either the first time it
+           was received or the time  of  the  most  recent
+           change in parameters."
+       ::= { rsvpResvEntry 26 }
+
+    rsvpResvPolicy OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..65536))
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The contents of the policy  object,  displayed
+           as an uninterpreted string of octets, including
+           the object header.  In the absence of  such  an
+           object, this should be of zero length."
+       ::= { rsvpResvEntry 27 }
+
+    rsvpResvStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'active' for all active RESV  messages.   This
+           object  may  be used to install static RESV in-
+           formation or delete RESV information."
+       ::= { rsvpResvEntry 28 }
+
+    rsvpResvTTL OBJECT-TYPE
+        SYNTAX      INTEGER (0..255)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The TTL value in the RSVP header that was last
+           received."
+       ::= { rsvpResvEntry 29 }
+
+    rsvpResvFlowId OBJECT-TYPE
+        SYNTAX      INTEGER (0..16777215)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The flow ID that this receiver  is  using,  if
+           this  is  an IPv6 session."
+       ::= { rsvpResvEntry 30 }
+
+--      The RSVP Reservation Requests Forwarded Table contains the
+--      information displayed by receivers regarding their needs with
+--      respect to sessions and senders. It is in essence a list of the
+--      valid RESV messages that the RSVP Router or Host is sending
+--      to its upstream neighbors.
+
+    rsvpResvFwdNewIndex OBJECT-TYPE
+        SYNTAX      TestAndIncr
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+           "This  object  is  used  to  assign  values  to
+           rsvpResvFwdNumber as described in 'Textual Con-
+           ventions  for  SNMPv2'.   The  network  manager
+           reads  the  object,  and  then writes the value
+           back in the SET that creates a new instance  of
+           rsvpResvFwdEntry.   If  the  SET fails with the
+           code 'inconsistentValue', then the process must
+           be  repeated; If the SET succeeds, then the ob-
+           ject is incremented, and the  new  instance  is
+           created according to the manager's directions."
+       ::= { rsvpGenObjects 4 }
+
+    rsvpResvFwdTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpResvFwdEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the  state  information
+           displayed upstream in RESV messages."
+       ::= { rsvpObjects 5 }
+
+    rsvpResvFwdEntry OBJECT-TYPE
+        SYNTAX      RsvpResvFwdEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing the  state  information
+           displayed  upstream in an RESV message concern-
+           ing a single sender."
+       INDEX { rsvpSessionNumber, rsvpResvFwdNumber }
+       ::= { rsvpResvFwdTable 1 }
+
+    RsvpResvFwdEntry ::=
+        SEQUENCE {
+            rsvpResvFwdNumber               SessionNumber,
+            rsvpResvFwdType                 SessionType,
+            rsvpResvFwdDestAddr             OCTET STRING,
+            rsvpResvFwdSenderAddr           OCTET STRING,
+            rsvpResvFwdDestAddrLength       INTEGER,
+            rsvpResvFwdSenderAddrLength     INTEGER,
+            rsvpResvFwdProtocol             Protocol,
+            rsvpResvFwdDestPort             Port,
+            rsvpResvFwdPort                 Port,
+            rsvpResvFwdHopAddr              OCTET STRING,
+            rsvpResvFwdHopLih               Integer32,
+            rsvpResvFwdInterface            InterfaceIndex,
+            rsvpResvFwdService              QosService,
+            rsvpResvFwdTSpecRate            BitRate,
+            rsvpResvFwdTSpecPeakRate        BitRate,
+            rsvpResvFwdTSpecBurst           BurstSize,
+            rsvpResvFwdTSpecMinTU           MessageSize,
+            rsvpResvFwdTSpecMaxTU           MessageSize,
+            rsvpResvFwdRSpecRate            BitRate,
+            rsvpResvFwdRSpecSlack           Integer32,
+            rsvpResvFwdInterval             RefreshInterval,
+            rsvpResvFwdScope                OCTET STRING,
+            rsvpResvFwdShared               TruthValue,
+            rsvpResvFwdExplicit             TruthValue,
+            rsvpResvFwdRSVPHop              TruthValue,
+            rsvpResvFwdLastChange           TimeStamp,
+            rsvpResvFwdPolicy               OCTET STRING,
+            rsvpResvFwdStatus               RowStatus,
+            rsvpResvFwdTTL                  INTEGER,
+            rsvpResvFwdFlowId               INTEGER
+        }
+
+    rsvpResvFwdNumber OBJECT-TYPE
+        SYNTAX      SessionNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The number of this reservation request.   This
+           is  for  SNMP Indexing purposes only and has no
+           relation to any protocol value."
+       ::= { rsvpResvFwdEntry 1 }
+
+    rsvpResvFwdType OBJECT-TYPE
+        SYNTAX      SessionType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The type of session (IP4, IP6, IP6  with  flow
+           information, etc)."
+       ::= { rsvpResvFwdEntry 2 }
+
+    rsvpResvFwdDestAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The destination address used by all senders in
+           this  session.   This object may not be changed
+           when the value of the RowStatus object is  'ac-
+           tive'."
+       ::= { rsvpResvFwdEntry 3 }
+
+    rsvpResvFwdSenderAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The source address of the sender  selected  by
+           this  reservation.  The value of all zeroes in-
+           dicates 'all senders'.  This object may not  be
+           changed  when the value of the RowStatus object
+           is 'active'."
+       ::= { rsvpResvFwdEntry 4 }
+
+    rsvpResvFwdDestAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The length of the destination address in bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvFwdEntry 5 }
+
+    rsvpResvFwdSenderAddrLength OBJECT-TYPE
+        SYNTAX      INTEGER(0..128)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The length of the sender's  address  in  bits.
+           This  is  the CIDR Prefix Length, which for IP4
+           hosts and multicast addresses is 32 bits.  This
+           object may not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvFwdEntry 6 }
+
+    rsvpResvFwdProtocol OBJECT-TYPE
+        SYNTAX      Protocol
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The IP Protocol used by a session. for  secure
+           sessions, this indicates IP Security.  This ob-
+           ject may not be changed when the value  of  the
+           RowStatus object is 'active'."
+       ::= { rsvpResvFwdEntry 7 }
+
+    rsvpResvFwdDestPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used as a  destina-
+           tion  port for all senders in this session.  If
+
+           the  IP   protocol   in   use,   specified   by
+           rsvpResvFwdProtocol,  is  50  (ESP) or 51 (AH),
+           this  represents  a  virtual  destination  port
+           number.   A value of zero indicates that the IP
+           protocol in use does not have ports.  This  ob-
+           ject  may  not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvFwdEntry 8 }
+
+    rsvpResvFwdPort OBJECT-TYPE
+        SYNTAX      Port
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The UDP or TCP port number used  as  a  source
+           port  for  this sender in this session.  If the
+           IP    protocol    in    use,    specified    by
+           rsvpResvFwdProtocol  is  50  (ESP)  or 51 (AH),
+           this represents a generalized  port  identifier
+           (GPI).   A  value of zero indicates that the IP
+           protocol in use does not have ports.  This  ob-
+           ject  may  not be changed when the value of the
+           RowStatus object is 'active'."
+       ::= { rsvpResvFwdEntry 9 }
+
+    rsvpResvFwdHopAddr OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The address of the (previous) RSVP  that  will
+           receive this message."
+       ::= { rsvpResvFwdEntry 10 }
+
+    rsvpResvFwdHopLih OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The Logical Interface Handle sent to the (pre-
+           vious) RSVP that will receive this message."
+       ::= { rsvpResvFwdEntry 11 }
+
+    rsvpResvFwdInterface OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The ifIndex value of the  interface  on  which
+           this RESV message was most recently sent."
+       ::= { rsvpResvFwdEntry 12 }
+
+    rsvpResvFwdService OBJECT-TYPE
+        SYNTAX      QosService
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The QoS Service classification requested."
+       ::= { rsvpResvFwdEntry 13 }
+
+    rsvpResvFwdTSpecRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The Average Bit  Rate  of  the  sender's  data
+           stream.   Within  a transmission burst, the ar-
+           rival rate may be as fast as  rsvpResvFwdTSpec-
+           PeakRate  (if  supported by the service model);
+           however, averaged across two or more burst  in-
+           tervals,    the    rate   should   not   exceed
+           rsvpResvFwdTSpecRate.
+
+           Note that this is a prediction, often based  on
+           the  general  capability  of a type of codec or
+           particular encoding; the measured average  rate
+           may be significantly lower."
+       ::= { rsvpResvFwdEntry 14 }
+
+    rsvpResvFwdTSpecPeakRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The Peak Bit Rate of the sender's data  stream
+           Traffic  arrival is not expected to exceed this
+           rate at any time, apart  from  the  effects  of
+
+           jitter in the network.  If not specified in the
+           TSpec, this returns zero or noSuchValue."
+       ::= { rsvpResvFwdEntry 15 }
+
+    rsvpResvFwdTSpecBurst OBJECT-TYPE
+        SYNTAX      BurstSize
+        UNITS       "bytes"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The size of the largest  burst  expected  from
+           the sender at a time.
+
+           If this is less than  the  sender's  advertised
+           burst  size, the receiver is asking the network
+           to provide flow pacing  beyond  what  would  be
+           provided  under normal circumstances. Such pac-
+           ing is at the network's option."
+       ::= { rsvpResvFwdEntry 16 }
+
+    rsvpResvFwdTSpecMinTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The minimum message size for  this  flow.  The
+           policing  algorithm will treat smaller messages
+           as though they are this size."
+       ::= { rsvpResvFwdEntry 17 }
+
+    rsvpResvFwdTSpecMaxTU OBJECT-TYPE
+        SYNTAX      MessageSize
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The maximum message size for  this  flow.  The
+           admission  algorithm  will  reject TSpecs whose
+           Maximum Transmission Unit, plus  the  interface
+           headers, exceed the interface MTU."
+       ::= { rsvpResvFwdEntry 18 }
+
+    rsvpResvFwdRSpecRate OBJECT-TYPE
+        SYNTAX      BitRate
+        UNITS       "bytes per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "If the requested  service  is  Guaranteed,  as
+           specified   by  rsvpResvService,  this  is  the
+           clearing rate that is being requested.   Other-
+           wise,  it  is  zero,  or  the  agent may return
+           noSuchValue."
+       ::= { rsvpResvFwdEntry 19 }
+
+    rsvpResvFwdRSpecSlack OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "microseconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "If the requested  service  is  Guaranteed,  as
+           specified by rsvpResvService, this is the delay
+           slack.  Otherwise, it is zero, or the agent may
+           return noSuchValue."
+       ::= { rsvpResvFwdEntry 20 }
+
+    rsvpResvFwdInterval OBJECT-TYPE
+        SYNTAX      RefreshInterval
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The interval between refresh  messages  adver-
+           tised to the Previous Hop."
+       ::= { rsvpResvFwdEntry 21 }
+
+    rsvpResvFwdScope OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..65536))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The contents of the scope object, displayed as
+           an  uninterpreted  string  of octets, including
+           the object header.  In the absence of  such  an
+           object, this should be of zero length."
+       ::= { rsvpResvFwdEntry 22 }
+
+    rsvpResvFwdShared OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, a reservation shared among senders is
+           requested.  If FALSE, a reservation specific to
+           this sender is requested."
+       ::= { rsvpResvFwdEntry 23 }
+
+    rsvpResvFwdExplicit OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, individual senders are  listed  using
+           Filter  Specifications.   If FALSE, all senders
+           are implicitly selected.  The Scope Object will
+           contain  a list of senders that need to receive
+           this reservation request  for  the  purpose  of
+           routing the RESV message."
+       ::= { rsvpResvFwdEntry 24 }
+
+    rsvpResvFwdRSVPHop OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, the node believes that  the  next  IP
+           hop  is  an  RSVP  hop.  If FALSE, the node be-
+           lieves that the next IP hop may not be an  RSVP
+           hop."
+       ::= { rsvpResvFwdEntry 25 }
+
+    rsvpResvFwdLastChange OBJECT-TYPE
+        SYNTAX      TimeStamp
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The time of the last change in  this  request;
+           This  is  either  the first time it was sent or
+           the time of the most recent change  in  parame-
+           ters."
+       ::= { rsvpResvFwdEntry 26 }
+
+    rsvpResvFwdPolicy OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..65536))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The contents of the policy  object,  displayed
+           as an uninterpreted string of octets, including
+           the object header.  In the absence of  such  an
+           object, this should be of zero length."
+       ::= { rsvpResvFwdEntry 27 }
+
+    rsvpResvFwdStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+           "'active' for all active RESV  messages.   This
+           object may be used to delete RESV information."
+       ::= { rsvpResvFwdEntry 28 }
+
+    rsvpResvFwdTTL OBJECT-TYPE
+        SYNTAX      INTEGER (0..255)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The TTL value in the RSVP header that was last
+           received."
+       ::= { rsvpResvFwdEntry 29 }
+
+    rsvpResvFwdFlowId OBJECT-TYPE
+        SYNTAX      INTEGER (0..16777215)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The flow ID that this receiver  is  using,  if
+           this  is  an IPv6 session."
+       ::= { rsvpResvFwdEntry 30 }
+
+--      The RSVP Interface Attributes Database contains the
+--      RSVP-specific information for an interface. Information
+--      that is shared with other reservation procedures such
+--      as ST-II is in the Integrated Interface Attributes
+--      Database.
+
+    rsvpIfTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The RSVP-specific attributes of  the  system's
+           interfaces."
+       ::= { rsvpObjects 6 }
+
+    rsvpIfEntry OBJECT-TYPE
+        SYNTAX      RsvpIfEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The RSVP-specific attributes of  the  a  given
+           interface."
+       INDEX { ifIndex }
+       ::= { rsvpIfTable 1 }
+
+RsvpIfEntry ::=
+    SEQUENCE {
+    rsvpIfUdpNbrs                       Gauge32,
+    rsvpIfIpNbrs                        Gauge32,
+    rsvpIfNbrs                          Gauge32,
+    rsvpIfEnabled                       TruthValue,
+    rsvpIfUdpRequired                   TruthValue,
+    rsvpIfRefreshBlockadeMultiple       INTEGER,
+    rsvpIfRefreshMultiple               INTEGER,
+    rsvpIfTTL                           INTEGER,
+    rsvpIfRefreshInterval               TimeInterval,
+    rsvpIfRouteDelay                    TimeInterval,
+    rsvpIfStatus                        RowStatus
+    }
+
+    rsvpIfUdpNbrs OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of neighbors perceived to be  using
+           only the RSVP UDP Encapsulation."
+       ::= { rsvpIfEntry 1 }
+
+    rsvpIfIpNbrs OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of neighbors perceived to be  using
+           only the RSVP IP Encapsulation."
+       ::= { rsvpIfEntry 2 }
+
+    rsvpIfNbrs OBJECT-TYPE
+        SYNTAX      Gauge32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+           "The number of neighbors  currently  perceived;
+           this  will  exceed rsvpIfIpNbrs + rsvpIfUdpNbrs
+           by the number of neighbors using both  encapsu-
+           lations."
+       ::= { rsvpIfEntry 3 }
+
+    rsvpIfRefreshBlockadeMultiple OBJECT-TYPE
+        SYNTAX      INTEGER (1..65536)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The value of the RSVP value 'Kb', Which is the
+           minimum   number   of  refresh  intervals  that
+           blockade state will last once entered."
+       DEFVAL      { 4 }
+       ::= { rsvpIfEntry 4 }
+
+    rsvpIfRefreshMultiple OBJECT-TYPE
+        SYNTAX      INTEGER (1..65536)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The value of the RSVP value 'K', which is  the
+           number  of  refresh intervals which must elapse
+           (minimum) before a PATH or RESV  message  which
+           is not being refreshed will be aged out."
+       DEFVAL      { 3 }
+       ::= { rsvpIfEntry 5 }
+
+    rsvpIfTTL OBJECT-TYPE
+        SYNTAX      INTEGER (0..255)
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The value of SEND_TTL used on  this  interface
+           for  messages  this node originates.  If set to
+           zero, the node determines  the  TTL  via  other
+           means."
+       DEFVAL { 0 } -- which is to say, no override
+       ::= { rsvpIfEntry 6 }
+
+    rsvpIfRefreshInterval OBJECT-TYPE
+        SYNTAX      TimeInterval
+        UNITS       "milliseconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The value of the RSVP value 'R', which is  the
+           minimum period between refresh transmissions of
+           a given PATH or RESV message on an interface."
+       DEFVAL      { 3000 }        -- 30 seconds
+       ::= { rsvpIfEntry 7 }
+
+    rsvpIfRouteDelay OBJECT-TYPE
+        SYNTAX      TimeInterval
+        UNITS       "hundredths of a second"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The approximate period from the time  a  route
+           is  changed to the time a resulting message ap-
+           pears on the interface."
+       DEFVAL      { 200 } -- 2 seconds
+       ::= { rsvpIfEntry 8 }
+
+    rsvpIfEnabled OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, RSVP is enabled  on  this  Interface.
+           If  FALSE,  RSVP  is not enabled on this inter-
+           face."
+       ::= { rsvpIfEntry 9 }
+
+    rsvpIfUdpRequired OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "If TRUE, manual configuration forces  the  use
+           of  UDP  encapsulation  on  the  interface.  If
+           FALSE, UDP encapsulation is only used if rsvpI-
+           fUdpNbrs is not zero."
+       ::= { rsvpIfEntry 10 }
+
+    rsvpIfStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'active' on interfaces that are configured for
+           RSVP."
+       ::= { rsvpIfEntry 11 }
+
+--      The RSVP Neighbor Database lists the neighbors the RSVP
+--      process currently is receiving messages from.
+
+    rsvpNbrTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF RsvpNbrEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing  the  Neighbors  of  an
+           RSVP system."
+       ::= { rsvpObjects 7 }
+
+    rsvpNbrEntry OBJECT-TYPE
+        SYNTAX      RsvpNbrEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "Information describing a  single  RSVP  Neigh-
+           bor."
+       INDEX { ifIndex, rsvpNbrAddress }
+       ::= { rsvpNbrTable 1 }
+
+RsvpNbrEntry ::=
+    SEQUENCE {
+
+    rsvpNbrAddress      OCTET STRING,
+    rsvpNbrProtocol     RsvpEncapsulation,
+    rsvpNbrStatus       RowStatus
+    }
+
+    rsvpNbrAddress OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..16))
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+           "The IP4 or IP6 Address used by this  neighbor.
+           This  object  may not be changed when the value
+           of the RowStatus object is 'active'."
+       ::= { rsvpNbrEntry 1 }
+
+    rsvpNbrProtocol OBJECT-TYPE
+        SYNTAX      RsvpEncapsulation
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "The encapsulation being used  by  this  neigh-
+           bor."
+       ::= { rsvpNbrEntry 2 }
+
+    rsvpNbrStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+           "'active' for all neighbors.  This  object  may
+           be  used  to configure neighbors.  In the pres-
+           ence of configured neighbors,  the  implementa-
+           tion may (but is not required to) limit the set
+           of valid neighbors to those configured."
+       ::= { rsvpNbrEntry 3 }
+
+--
+--      Notifications used to signal events
+--
+
+    rsvpNotifications OBJECT IDENTIFIER
+                      ::= { rsvpNotificationsPrefix 0 }
+
+    newFlow NOTIFICATION-TYPE
+
+        OBJECTS {
+                    intSrvFlowStatus, rsvpSessionDestAddr,
+                    rsvpResvFwdStatus, rsvpResvStatus, rsvpSenderStatus
+                }
+        STATUS  current
+        DESCRIPTION
+           "The newFlow trap indicates that the  originat-
+           ing  system  has  installed  a  new flow in its
+           classifier, or (when reservation  authorization
+           is  in view) is prepared to install such a flow
+           in the classifier and is requesting  authoriza-
+           tion.   The objects included with the Notifica-
+           tion may be used to  read  further  information
+           using  the  Integrated  Services and RSVP MIBs.
+           Authorization  or  non-authorization   may   be
+           enacted by a write to the variable intSrvFlowS-
+           tatus."
+       ::= { rsvpNotifications 1 }
+
+    lostFlow NOTIFICATION-TYPE
+        OBJECTS {
+                    intSrvFlowStatus, rsvpSessionDestAddr,
+                    rsvpResvFwdStatus, rsvpResvStatus, rsvpSenderStatus
+                }
+        STATUS  current
+        DESCRIPTION
+           "The lostFlow trap indicates that the originat-
+           ing system has removed a flow from its classif-
+           ier."
+       ::= { rsvpNotifications 2 }
+
+-- conformance information
+
+rsvpGroups      OBJECT IDENTIFIER ::= { rsvpConformance 1 }
+rsvpCompliances OBJECT IDENTIFIER ::= { rsvpConformance 2 }
+
+-- compliance statements
+
+    rsvpCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+           "The compliance statement.  Note that  the  im-
+           plementation  of this module requires implemen-
+           tation of the Integrated Services MIB as well."
+
+       MODULE  -- this module
+       MANDATORY-GROUPS {
+           rsvpSessionGroup, rsvpSenderGroup, rsvpResvGroup,
+           rsvpIfGroup, rsvpNbrGroup
+           }
+
+       GROUP rsvpResvFwdGroup
+         DESCRIPTION
+          "The Reservation Requests table  is  appropriate
+          in  implementations that store upstream reserva-
+          tion messages, but not appropriate in  implemen-
+          tations  which  calculate them on each transmis-
+          sion."
+
+      GROUP rsvpNotificationGroup
+        DESCRIPTION
+         "The notifications in this module may be used  to
+         advise a network management station of changes in
+         flow status, and are required when this use is in
+         view."
+
+     OBJECT       rsvpSessionRequests
+       MIN-ACCESS not-accessible
+       DESCRIPTION
+        "This object is optional."
+
+    OBJECT       rsvpSenderType
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderDestAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderDestAddrLength
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+
+       read-only."
+
+    OBJECT       rsvpSenderAddrLength
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderProtocol
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderDestPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderHopAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderHopLih
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderInterface
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderTSpecRate
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+
+       read-only."
+
+    OBJECT       rsvpSenderTSpecPeakRate
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderTSpecBurst
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderTSpecMinTU
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderTSpecMaxTU
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderInterval
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderRSVPHop
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderPolicy
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderAdspecBreak
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+
+       read-only."
+
+    OBJECT       rsvpSenderAdspecHopCount
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderAdspecPathBw
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderAdspecMinLatency
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderAdspecMtu
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderAdspecGuaranteedSvc
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedBreak
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedCtot
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedDtot
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedCsum
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedDsum
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedHopCount
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedPathBw
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedMinLatency
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecGuaranteedMtu
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Guaranteed Service."
+
+    OBJECT       rsvpSenderAdspecCtrlLoadSvc
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Controlled Load."
+
+    OBJECT       rsvpSenderAdspecCtrlLoadBreak
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+
+       support Controlled Load."
+
+    OBJECT       rsvpSenderAdspecCtrlLoadHopCount
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Controlled Load."
+
+    OBJECT       rsvpSenderAdspecCtrlLoadPathBw
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Controlled Load."
+
+    OBJECT       rsvpSenderAdspecCtrlLoadMinLatency
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Controlled Load."
+
+    OBJECT       rsvpSenderAdspecCtrlLoadMtu
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This may be not-accessible if the system does  not
+       support Controlled Load."
+
+    OBJECT       rsvpSenderStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpSenderFlowId
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This object is needed only in a system that imple-
+       ments IPv6."
+
+    OBJECT       rsvpResvType
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvDestAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvSenderAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvDestAddrLength
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvSenderAddrLength
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvProtocol
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvDestPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvHopAddr
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvHopLih
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvInterface
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvService
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvTSpecRate
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvTSpecPeakRate
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvTSpecBurst
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvTSpecMinTU
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvTSpecMaxTU
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvRSpecRate
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvRSpecSlack
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvInterval
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvScope
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvShared
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvExplicit
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvRSVPHop
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvPolicy
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+    OBJECT       rsvpResvFlowId
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This object is needed only in a system that imple-
+       ments IPv6."
+
+    OBJECT       rsvpResvFwdStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+       "read-create access is not required.  This  may  be
+       read-only."
+
+    OBJECT       rsvpResvFwdFlowId
+      MIN-ACCESS not-accessible
+      DESCRIPTION
+       "This object is needed only in a system that imple-
+       ments IPv6."
+    ::= { rsvpCompliances 1 }
+
+    rsvpSessionGroup OBJECT-GROUP
+         OBJECTS {
+            rsvpSessionType, rsvpSessionDestAddr,
+            rsvpSessionDestAddrLength, rsvpSessionProtocol,
+            rsvpSessionPort, rsvpSessionSenders, rsvpSessionReceivers,
+            rsvpSessionRequests
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required for RSVP Systems."
+       ::= { rsvpGroups 1 }
+
+    rsvpSenderGroup OBJECT-GROUP
+         OBJECTS {
+            rsvpSenderType, rsvpSenderDestAddr, rsvpSenderAddr,
+            rsvpSenderDestAddrLength, rsvpSenderAddrLength,
+            rsvpSenderProtocol, rsvpSenderDestPort, rsvpSenderPort,
+            rsvpSenderHopAddr, rsvpSenderHopLih, rsvpSenderInterface,
+            rsvpSenderTSpecRate, rsvpSenderTSpecPeakRate,
+            rsvpSenderTSpecBurst, rsvpSenderTSpecMinTU,
+            rsvpSenderTSpecMaxTU, rsvpSenderInterval,
+            rsvpSenderLastChange, rsvpSenderStatus,
+            rsvpSenderRSVPHop, rsvpSenderPolicy,
+            rsvpSenderAdspecBreak, rsvpSenderAdspecHopCount,
+            rsvpSenderAdspecPathBw, rsvpSenderAdspecMinLatency,
+            rsvpSenderAdspecMtu, rsvpSenderAdspecGuaranteedSvc,
+            rsvpSenderAdspecGuaranteedBreak,
+            rsvpSenderAdspecGuaranteedCtot,
+            rsvpSenderAdspecGuaranteedDtot,
+            rsvpSenderAdspecGuaranteedCsum,
+            rsvpSenderAdspecGuaranteedDsum,
+            rsvpSenderAdspecGuaranteedHopCount,
+            rsvpSenderAdspecGuaranteedPathBw,
+            rsvpSenderAdspecGuaranteedMinLatency,
+            rsvpSenderAdspecGuaranteedMtu, rsvpSenderAdspecCtrlLoadSvc,
+            rsvpSenderAdspecCtrlLoadBreak,
+            rsvpSenderAdspecCtrlLoadHopCount,
+            rsvpSenderAdspecCtrlLoadPathBw,
+            rsvpSenderAdspecCtrlLoadMinLatency,
+            rsvpSenderAdspecCtrlLoadMtu, rsvpSenderNewIndex
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required for RSVP Systems."
+       ::= { rsvpGroups 2 }
+
+    rsvpResvGroup OBJECT-GROUP
+         OBJECTS {
+            rsvpResvType, rsvpResvDestAddr, rsvpResvSenderAddr,
+            rsvpResvDestAddrLength, rsvpResvSenderAddrLength,
+            rsvpResvProtocol, rsvpResvDestPort, rsvpResvPort,
+            rsvpResvHopAddr, rsvpResvHopLih, rsvpResvInterface,
+            rsvpResvService, rsvpResvTSpecRate, rsvpResvTSpecBurst,
+            rsvpResvTSpecPeakRate, rsvpResvTSpecMinTU,
+            rsvpResvTSpecMaxTU, rsvpResvRSpecRate,
+            rsvpResvRSpecSlack, rsvpResvInterval,
+            rsvpResvScope, rsvpResvShared, rsvpResvExplicit,
+            rsvpResvRSVPHop, rsvpResvLastChange, rsvpResvPolicy,
+            rsvpResvStatus, rsvpResvNewIndex
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required for RSVP Systems."
+       ::= { rsvpGroups 3 }
+
+    rsvpResvFwdGroup OBJECT-GROUP
+         OBJECTS {
+            rsvpResvFwdType, rsvpResvFwdDestAddr, rsvpResvFwdSenderAddr,
+            rsvpResvFwdDestAddrLength, rsvpResvFwdSenderAddrLength,
+            rsvpResvFwdProtocol, rsvpResvFwdDestPort, rsvpResvFwdPort,
+            rsvpResvFwdHopAddr, rsvpResvFwdHopLih, rsvpResvFwdInterface,
+            rsvpResvFwdNewIndex, rsvpResvFwdService,
+            rsvpResvFwdTSpecPeakRate, rsvpResvFwdTSpecMinTU,
+            rsvpResvFwdTSpecMaxTU, rsvpResvFwdTSpecRate,
+            rsvpResvFwdTSpecBurst, rsvpResvFwdRSpecRate,
+            rsvpResvFwdRSpecSlack, rsvpResvFwdInterval,
+            rsvpResvFwdScope, rsvpResvFwdShared, rsvpResvFwdExplicit,
+            rsvpResvFwdRSVPHop, rsvpResvFwdLastChange,
+            rsvpResvFwdPolicy, rsvpResvFwdStatus
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are optional, used for some RSVP
+           Systems."
+       ::= { rsvpGroups 4 }
+
+    rsvpIfGroup OBJECT-GROUP
+         OBJECTS {
+            rsvpIfUdpNbrs, rsvpIfIpNbrs, rsvpIfNbrs, rsvpIfEnabled,
+            rsvpIfUdpRequired, rsvpIfRefreshBlockadeMultiple,
+            rsvpIfRefreshMultiple, rsvpIfRefreshInterval, rsvpIfTTL,
+            rsvpIfRouteDelay, rsvpIfStatus
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required for RSVP Systems."
+       ::= { rsvpGroups 6 }
+
+    rsvpNbrGroup OBJECT-GROUP
+         OBJECTS {
+            rsvpNbrProtocol, rsvpNbrStatus
+        }
+        STATUS  current
+        DESCRIPTION
+           "These objects are required for RSVP Systems."
+       ::= { rsvpGroups 7 }
+
+    rsvpNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS { newFlow, lostFlow }
+        STATUS  current
+        DESCRIPTION
+           "This notification is required for Systems sup-
+           porting  the  RSVP  Policy Module using an SNMP
+           interface to the Policy Manager."
+       ::= { rsvpGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/RTP-MIB.mib b/snmp_builder/mibs/RTP-MIB.mib
new file mode 100644
index 0000000..3f3d792
--- /dev/null
+++ b/snmp_builder/mibs/RTP-MIB.mib
@@ -0,0 +1,981 @@
+RTP-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+       Counter32, Counter64, Gauge32, mib-2, Integer32,
+       MODULE-IDENTITY,
+       OBJECT-TYPE, Unsigned32                     FROM SNMPv2-SMI
+       RowStatus, TAddress,
+       TDomain, TestAndIncr,
+       TimeStamp, TruthValue                       FROM SNMPv2-TC
+       OBJECT-GROUP, MODULE-COMPLIANCE             FROM SNMPv2-CONF
+       Utf8String                                  FROM SYSAPPL-MIB
+       InterfaceIndex                              FROM IF-MIB;
+
+rtpMIB MODULE-IDENTITY
+    LAST-UPDATED "200010020000Z"  -- 2 October 2000
+    ORGANIZATION
+                 "IETF AVT Working Group
+    Email:   rem-conf@es.net"
+    CONTACT-INFO
+            "Mark Baugher
+    Postal: Intel Corporation
+            2111 NE 25th Avenue
+            Hillsboro, OR   97124
+
+            United States
+    Tel:    +1 503 466 8406
+    Email:  mbaugher@passedge.com
+
+            Bill Strahm
+    Postal: Intel Corporation
+            2111 NE 25th Avenue
+            Hillsboro, OR   97124
+            United States
+    Tel:    +1 503 264 4632
+    Email:  bill.strahm@intel.com
+
+            Irina Suconick
+    Postal: Ennovate Networks
+            60 Codman Hill Rd.,
+            Boxboro, Ma 01719
+    Tel:    +1 781-505-2155
+    Email:  irina@ennovatenetworks.com"
+        DESCRIPTION
+        "The managed objects of RTP systems.  The MIB is
+        structured around three types of information.
+        1. General information about RTP sessions such
+           as the session address.
+        2. Information about RTP streams being sent to
+           an RTP session by a particular sender.
+        3. Information about RTP streams received on an
+           RTP session by a particular receiver from a
+           particular sender.
+         There are two types of RTP Systems, RTP hosts and
+         RTP monitors.  As described below, certain objects
+         are unique to a particular type of RTP System.   An
+         RTP host may also function as an RTP monitor.
+         Refer to RFC 1889, 'RTP: A Transport Protocol for
+         Real-Time Applications,' section 3.0, for definitions."
+   REVISION     "200010020000Z"  -- 2 October 2000
+   DESCRIPTION  "Initial version of this MIB.
+                 Published as RFC 2959."
+::= { mib-2 87 }
+
+--
+-- OBJECTS
+--
+rtpMIBObjects OBJECT IDENTIFIER ::= { rtpMIB 1 }
+rtpConformance OBJECT IDENTIFIER ::= { rtpMIB 2 }
+
+--
+
+-- SESSION NEW INDEX
+--
+rtpSessionNewIndex OBJECT-TYPE
+    SYNTAX          TestAndIncr
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+      "This  object  is  used  to  assign  values  to rtpSessionIndex
+       as described in 'Textual Conventions  for  SMIv2'.  For an RTP
+       system that supports the creation of rows, the  network manager
+       would read the  object,  and  then write the value back in
+       the Set that creates a new instance  of rtpSessionEntry.   If
+       the  Set  fails with the code 'inconsistentValue,' then the
+       process must be repeated; If the Set succeeds, then the object
+       is incremented, and the  new  instance  is created according to
+       the manager's directions.  However, if the RTP agent is not
+       acting as a monitor, only the RTP agent may create conceptual
+       rows in the RTP session table."
+    ::= { rtpMIBObjects 1 }
+
+--
+-- SESSION INVERSE TABLE
+--
+rtpSessionInverseTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RtpSessionInverseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Maps rtpSessionDomain, rtpSessionRemAddr, and rtpSessionLocAddr
+       TAddress pairs to one or more rtpSessionIndex values, each
+       describing a row in the rtpSessionTable.  This makes it possible
+       to retrieve the row(s) in the rtpSessionTable corresponding to a
+       given session without having to walk the entire (potentially
+       large) table."
+    ::= { rtpMIBObjects 2 }
+
+rtpSessionInverseEntry OBJECT-TYPE
+    SYNTAX          RtpSessionInverseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Each entry corresponds to exactly one entry in the
+       rtpSessionTable - the entry containing the tuple,
+       rtpSessionDomain, rtpSessionRemAddr, rtpSessionLocAddr
+       and rtpSessionIndex."
+    INDEX { rtpSessionDomain, rtpSessionRemAddr, rtpSessionLocAddr,
+            rtpSessionIndex }
+    ::= { rtpSessionInverseTable 1 }
+
+RtpSessionInverseEntry ::= SEQUENCE {
+        rtpSessionInverseStartTime     TimeStamp
+        }
+
+rtpSessionInverseStartTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The value of SysUpTime at the time that this row was
+       created."
+    ::= { rtpSessionInverseEntry 1 }
+
+--
+--      SESSION TABLE
+--
+rtpSessionTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RtpSessionEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+          "There's one entry in rtpSessionTable for each RTP session
+          on which packets are being sent, received, and/or
+          monitored."
+    ::= { rtpMIBObjects 3 }
+
+rtpSessionEntry OBJECT-TYPE
+    SYNTAX          RtpSessionEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Data in rtpSessionTable uniquely identify an RTP session.  A
+       host RTP agent MUST create a read-only row for each session to
+       which packets are being sent or received.  Rows MUST be created
+       by the RTP Agent at the start of a session when one or more
+       senders or receivers are observed.  Rows created by an RTP agent
+       MUST be deleted when the session is over and there are no
+       rtpRcvrEntry and no rtpSenderEntry for this session.  An RTP
+       session SHOULD be monitored to create management information on
+       all RTP streams being sent or received when the
+       rtpSessionMonitor has the TruthValue of 'true(1)'.  An RTP
+       monitor SHOULD permit row creation with the side effect of
+       causing the RTP System to join the multicast session for the
+       purposes of gathering management information  (additional
+       conceptual rows are created in the rtpRcvrTable and
+       rtpSenderTable).  Thus, rtpSessionTable rows SHOULD be created
+       for RTP session monitoring purposes.  Rows created by a
+       management application SHOULD be deleted via SNMP operations by
+
+       management applications.  Rows created by management operations
+       are deleted by management operations by setting
+       rtpSessionRowStatus to 'destroy(6)'."
+    INDEX { rtpSessionIndex }
+    ::= { rtpSessionTable 1 }
+
+RtpSessionEntry ::= SEQUENCE {
+        rtpSessionIndex         Integer32,
+        rtpSessionDomain        TDomain,
+        rtpSessionRemAddr       TAddress,
+        rtpSessionLocAddr       TAddress,
+        rtpSessionIfIndex       InterfaceIndex,
+        rtpSessionSenderJoins   Counter32,
+        rtpSessionReceiverJoins Counter32,
+        rtpSessionByes          Counter32,
+        rtpSessionStartTime     TimeStamp,
+        rtpSessionMonitor       TruthValue,
+        rtpSessionRowStatus     RowStatus
+        }
+
+rtpSessionIndex OBJECT-TYPE
+    SYNTAX          Integer32 (1..2147483647)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "The index of the conceptual row which is for SNMP purposes
+       only and has no relation to any protocol value.  There is
+       no requirement that these rows are created or maintained
+       sequentially."
+    ::= { rtpSessionEntry 1 }
+
+rtpSessionDomain OBJECT-TYPE
+    SYNTAX          TDomain
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+      "The transport-layer protocol used for sending or receiving
+       the stream of RTP data packets on this session.
+       Cannot be changed if rtpSessionRowStatus is 'active'."
+    ::= { rtpSessionEntry 2 }
+
+rtpSessionRemAddr OBJECT-TYPE
+    SYNTAX          TAddress
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+      "The address to which RTP packets are sent by the RTP system.
+      In an IP multicast RTP session, this is the single address used
+
+      by all senders and receivers of RTP session data.  In a unicast
+      RTP session this is the unicast address of the remote RTP system.
+      'The destination address pair may be common for all participants,
+      as in the case of IP multicast, or may be different for each, as
+      in the case of individual unicast network address pairs.'  See
+      RFC 1889, 'RTP: A Transport Protocol for Real-Time Applications,'
+      sec. 3.  The transport service is identified by rtpSessionDomain.
+      For snmpUDPDomain, this is an IP address and even-numbered UDP
+      Port with the RTCP being sent on the next higher odd-numbered
+      port, see RFC 1889, sec. 5."
+    ::= { rtpSessionEntry 3 }
+
+rtpSessionLocAddr OBJECT-TYPE
+    SYNTAX          TAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The local address used by the RTP system.  In an IP multicast
+       RTP session, rtpSessionRemAddr will be the same IP multicast
+       address as rtpSessionLocAddr.  In a unicast RTP session,
+       rtpSessionRemAddr and rtpSessionLocAddr will have different
+       unicast addresses.  See RFC 1889, 'RTP: A Transport Protocol for
+       Real-Time Applications,' sec. 3.  The transport service is
+       identified by rtpSessionDomain.  For snmpUDPDomain, this is an IP
+       address and even-numbered UDP Port with the RTCP being sent on
+       the next higher odd-numbered port, see RFC 1889, sec. 5."
+    ::= { rtpSessionEntry 4 }
+
+rtpSessionIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+     "The ifIndex value is set to the corresponding value
+      from IF-MIB (See RFC 2233, 'The Interfaces Group MIB using
+      SMIv2').  This is the interface that the RTP stream is being sent
+      to or received from, or in the case of an RTP Monitor the
+      interface that RTCP packets will be received on.  Cannot be
+      changed if rtpSessionRowStatus is 'active'."
+    ::= { rtpSessionEntry 5 }
+
+rtpSessionSenderJoins OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The number of senders that have been observed to have
+       joined the session since this conceptual row was created
+
+       (rtpSessionStartTime).  A sender 'joins' an RTP
+       session by sending to it.  Senders that leave and then
+       re-join following an RTCP BYE (see RFC 1889, 'RTP: A
+       Transport Protocol for Real-Time Applications,' sec. 6.6)
+       or session timeout may be counted twice.  Every time a new
+       RTP sender is detected either using RTP or RTCP, this counter
+       is incremented."
+    ::= { rtpSessionEntry 6 }
+
+rtpSessionReceiverJoins OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The number of receivers that have been been observed to
+       have joined this session since this conceptual row was
+       created (rtpSessionStartTime).  A receiver 'joins' an RTP
+       session by sending RTCP Receiver Reports to the session.
+       Receivers that leave and then re-join following an RTCP BYE
+       (see RFC 1889, 'RTP: A Transport Protocol for Real-Time
+       Applications,' sec. 6.6) or session timeout may be counted
+       twice."
+    ::= { rtpSessionEntry 7 }
+
+rtpSessionByes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "A count of RTCP BYE (see RFC 1889, 'RTP: A Transport
+       Protocol for Real-Time Applications,' sec. 6.6) messages
+       received by this entity."
+    ::= { rtpSessionEntry 8 }
+
+rtpSessionStartTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The value of SysUpTime at the time that this row was
+       created."
+    ::= { rtpSessionEntry 9 }
+
+rtpSessionMonitor OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Boolean, Set to 'true(1)' if remote senders or receivers in
+       addition to the local RTP System are to be monitored using RTCP.
+       RTP Monitors MUST initialize to 'true(1)' and RTP Hosts SHOULD
+       initialize this 'false(2)'.  Note that because 'host monitor'
+       systems are receiving RTCP from their remote participants they
+       MUST set this value to 'true(1)'."
+    ::= { rtpSessionEntry 10 }
+
+rtpSessionRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+      "Value of 'active' when RTP or RTCP messages are being
+       sent or received by an RTP System.  A newly-created
+       conceptual row must have the all read-create objects
+       initialized before becoming 'active'.
+       A conceptual row that is in the 'notReady' or 'notInService'
+       state MAY be removed after 5  minutes."
+    ::= { rtpSessionEntry 11 }
+
+--
+-- SENDER INVERSE TABLE
+--
+rtpSenderInverseTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RtpSenderInverseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Maps rtpSenderAddr, rtpSessionIndex, to the rtpSenderSSRC
+       index of the rtpSenderTable.  This table allows management
+       applications to find entries sorted by rtpSenderAddr rather than
+       sorted by rtpSessionIndex.  Given the rtpSessionDomain and
+       rtpSenderAddr, a set of rtpSessionIndex and rtpSenderSSRC values
+       can be returned from a tree walk.  When rtpSessionIndex is
+       specified in the SNMP Get-Next operations, one or more
+       rtpSenderSSRC values may be returned."
+    ::= { rtpMIBObjects 4 }
+
+rtpSenderInverseEntry OBJECT-TYPE
+    SYNTAX          RtpSenderInverseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Each entry corresponds to exactly one entry in the
+       rtpSenderTable - the entry containing the index pair,
+       rtpSessionIndex, rtpSenderSSRC."
+    INDEX { rtpSessionDomain, rtpSenderAddr, rtpSessionIndex,
+            rtpSenderSSRC }
+    ::= { rtpSenderInverseTable 1 }
+
+RtpSenderInverseEntry ::= SEQUENCE {
+        rtpSenderInverseStartTime     TimeStamp
+        }
+
+rtpSenderInverseStartTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The value of SysUpTime at the time that this row was
+       created."
+    ::= { rtpSenderInverseEntry 1 }
+
+--
+--  SENDERS TABLE
+--
+rtpSenderTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RtpSenderEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Table of information about a sender or senders to an RTP
+       Session. RTP sending hosts MUST have an entry in this table
+       for each stream being sent.  RTP receiving hosts MAY have an
+       entry in this table for each sending stream being received by
+       this host.  RTP monitors MUST create an entry for each observed
+       sender to a multicast RTP Session as a side-effect when a
+       conceptual row in the rtpSessionTable is made 'active' by a
+       manager."
+    ::= { rtpMIBObjects 5 }
+
+rtpSenderEntry OBJECT-TYPE
+    SYNTAX          RtpSenderEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Each entry contains information from a single RTP Sender
+       Synchronization Source (SSRC, see RFC 1889 'RTP: A Transport
+       Protocol for Real-Time Applications' sec.6).  The session is
+       identified to the the SNMP entity by rtpSessionIndex.
+       Rows are removed by the RTP agent when a BYE is received
+       from the sender or when the sender times out (see RFC
+       1889, Sec. 6.2.1) or when the rtpSessionEntry is deleted."
+    INDEX { rtpSessionIndex, rtpSenderSSRC }
+    ::= { rtpSenderTable 1 }
+
+RtpSenderEntry ::= SEQUENCE {
+        rtpSenderSSRC           Unsigned32,
+        rtpSenderCNAME          Utf8String,
+        rtpSenderAddr           TAddress,
+        rtpSenderPackets        Counter64,
+        rtpSenderOctets         Counter64,
+        rtpSenderTool           Utf8String,
+        rtpSenderSRs            Counter32,
+        rtpSenderSRTime         TimeStamp,
+        rtpSenderPT             INTEGER,
+        rtpSenderStartTime      TimeStamp
+        }
+
+rtpSenderSSRC OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "The RTP SSRC, or synchronization source identifier of the
+       sender.  The RTP session address plus an SSRC uniquely
+       identify a sender to an RTP session (see RFC 1889, 'RTP: A
+       Transport Protocol for Real-Time Applications' sec.3)."
+    ::= { rtpSenderEntry 1 }
+
+rtpSenderCNAME OBJECT-TYPE
+    SYNTAX          Utf8String
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The RTP canonical name of the sender."
+    ::= { rtpSenderEntry 2 }
+
+rtpSenderAddr OBJECT-TYPE
+    SYNTAX          TAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The unicast transport source address of the sender.  In the
+       case of an RTP Monitor this address is the address that the
+       sender is using to send its RTCP Sender Reports."
+    ::= { rtpSenderEntry 3 }
+
+rtpSenderPackets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Count of RTP packets sent by this sender, or observed by
+
+       an RTP monitor, since rtpSenderStartTime."
+    ::= { rtpSenderEntry 4 }
+
+rtpSenderOctets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Count of non-header RTP octets sent by this sender, or observed
+       by an RTP monitor, since rtpSenderStartTime."
+    ::= { rtpSenderEntry 5 }
+
+rtpSenderTool OBJECT-TYPE
+    SYNTAX          Utf8String (SIZE(0..127))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Name of the application program source of the stream."
+    ::= { rtpSenderEntry 6 }
+
+rtpSenderSRs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "A count of the number of RTCP Sender Reports that have
+       been sent from this sender, or observed if the RTP entity
+       is a monitor, since rtpSenderStartTime."
+    ::= { rtpSenderEntry 7 }
+
+rtpSenderSRTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "rtpSenderSRTime is the value of SysUpTime at the time that
+       the last SR was received from this sender, in the case of a
+       monitor or receiving host.  Or sent by this sender, in the
+       case of a sending host."
+    ::= { rtpSenderEntry 8 }
+
+rtpSenderPT OBJECT-TYPE
+    SYNTAX          INTEGER (0..127)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Payload type from the RTP header of the most recently received
+       RTP Packet (see RFC 1889, 'RTP: A Transport Protocol for
+
+       Real-Time Applications' sec. 5)."
+    ::= { rtpSenderEntry 9 }
+
+rtpSenderStartTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The value of SysUpTime at the time that this row was
+       created."
+    ::= { rtpSenderEntry 10 }
+
+--
+-- RECEIVER INVERSE TABLE
+--
+rtpRcvrInverseTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RtpRcvrInverseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Maps rtpRcvrAddr and rtpSessionIndex to the rtpRcvrSRCSSRC and
+       rtpRcvrSSRC indexes of the rtpRcvrTable.  This table allows
+       management applications to find entries sorted by rtpRcvrAddr
+       rather than by rtpSessionIndex. Given rtpSessionDomain and
+       rtpRcvrAddr, a set of rtpSessionIndex, rtpRcvrSRCSSRC, and
+       rtpRcvrSSRC values can be returned from a tree walk.  When
+       rtpSessionIndex is specified in SNMP Get-Next operations, one or
+       more rtpRcvrSRCSSRC and rtpRcvrSSRC pairs may be returned."
+    ::= { rtpMIBObjects 6 }
+
+rtpRcvrInverseEntry OBJECT-TYPE
+    SYNTAX          RtpRcvrInverseEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Each entry corresponds to exactly one entry in the
+       rtpRcvrTable - the entry containing the index pair,
+       rtpSessionIndex, rtpRcvrSSRC."
+    INDEX { rtpSessionDomain, rtpRcvrAddr,  rtpSessionIndex,
+            rtpRcvrSRCSSRC, rtpRcvrSSRC }
+    ::= { rtpRcvrInverseTable 1 }
+
+RtpRcvrInverseEntry ::= SEQUENCE {
+        rtpRcvrInverseStartTime     TimeStamp
+        }
+
+rtpRcvrInverseStartTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The value of SysUpTime at the time that this row was
+       created."
+    ::= { rtpRcvrInverseEntry 1 }
+
+--
+--  RECEIVERS TABLE
+--
+rtpRcvrTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF RtpRcvrEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Table of information about a receiver or receivers of RTP
+       session data. RTP hosts that receive RTP session packets
+       MUST create an entry in this table for that receiver/sender
+       pair.  RTP hosts that send RTP session packets MAY create
+       an entry in this table for each receiver to their stream
+       using RTCP feedback from the RTP group.  RTP monitors
+       create an entry for each observed RTP session receiver as
+       a side effect when a conceptual row in the rtpSessionTable
+       is made 'active' by a manager."
+    ::= { rtpMIBObjects 7 }
+
+rtpRcvrEntry OBJECT-TYPE
+    SYNTAX          RtpRcvrEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+      "Each entry contains information from a single RTP
+       Synchronization Source that is receiving packets from the
+       sender identified by rtpRcvrSRCSSRC (SSRC, see RFC 1889,
+       'RTP: A Transport Protocol for Real-Time Applications'
+       sec.6).  The session is identified to the the RTP Agent entity
+       by rtpSessionIndex.  Rows are removed by the RTP agent when
+       a BYE is received from the sender or when the sender times
+       out (see RFC 1889, Sec. 6.2.1) or when the rtpSessionEntry is
+       deleted."
+    INDEX { rtpSessionIndex, rtpRcvrSRCSSRC, rtpRcvrSSRC }
+    ::= { rtpRcvrTable 1 }
+
+RtpRcvrEntry ::= SEQUENCE {
+        rtpRcvrSRCSSRC        Unsigned32,
+        rtpRcvrSSRC           Unsigned32,
+        rtpRcvrCNAME          Utf8String,
+        rtpRcvrAddr           TAddress,
+        rtpRcvrRTT            Gauge32,
+        rtpRcvrLostPackets    Counter64,
+        rtpRcvrJitter         Gauge32,
+        rtpRcvrTool           Utf8String,
+        rtpRcvrRRs            Counter32,
+        rtpRcvrRRTime         TimeStamp,
+        rtpRcvrPT             INTEGER,
+        rtpRcvrPackets        Counter64,
+        rtpRcvrOctets         Counter64,
+        rtpRcvrStartTime      TimeStamp
+        }
+
+rtpRcvrSRCSSRC OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "The RTP SSRC, or synchronization source identifier of the
+       sender.  The RTP session address plus an SSRC uniquely
+       identify a sender or receiver of an RTP stream (see RFC
+       1889, 'RTP:  A Transport Protocol for Real-Time
+       Applications' sec.3)."
+    ::= { rtpRcvrEntry 1 }
+
+rtpRcvrSSRC OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "The RTP SSRC, or synchronization source identifier of the
+       receiver.  The RTP session address plus an SSRC uniquely
+       identify a receiver of an RTP stream (see RFC 1889, 'RTP:
+       A Transport Protocol for Real-Time Applications' sec.3)."
+    ::= { rtpRcvrEntry 2 }
+
+rtpRcvrCNAME OBJECT-TYPE
+    SYNTAX       Utf8String
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The RTP canonical name of the receiver."
+    ::= { rtpRcvrEntry 3 }
+
+rtpRcvrAddr OBJECT-TYPE
+    SYNTAX       TAddress
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The unicast transport address on which the receiver is
+       receiving RTP packets and/or RTCP Receiver Reports."
+    ::= { rtpRcvrEntry 4 }
+
+rtpRcvrRTT OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The round trip time measurement taken by the source of the
+       RTP stream based on the algorithm described on sec. 6 of
+       RFC 1889, 'RTP: A Transport Protocol for Real-Time
+       Applications.'  This algorithm can produce meaningful
+       results when the RTP agent has the same clock as the stream
+       sender (when the RTP monitor is also the sending host for the
+       particular receiver).  Otherwise, the entity should return
+       'noSuchInstance' in response to queries against rtpRcvrRTT."
+    ::= { rtpRcvrEntry 5 }
+
+rtpRcvrLostPackets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "A count of RTP  packets lost as observed by this receiver
+       since rtpRcvrStartTime."
+    ::= { rtpRcvrEntry 6 }
+
+rtpRcvrJitter OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "An estimate of delay variation as observed by this
+       receiver.  (see RFC 1889, 'RTP: A Transport Protocol
+       for Real-Time Applications' sec.6.3.1 and A.8)."
+    ::= { rtpRcvrEntry 7 }
+
+rtpRcvrTool OBJECT-TYPE
+    SYNTAX          Utf8String (SIZE(0..127))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Name of the application program source of the stream."
+    ::= { rtpRcvrEntry 8 }
+
+rtpRcvrRRs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "A count of the number of RTCP Receiver Reports that have
+       been sent from this receiver, or observed if the RTP entity
+       is a monitor, since rtpRcvrStartTime."
+    ::= { rtpRcvrEntry 9 }
+
+rtpRcvrRRTime OBJECT-TYPE
+    SYNTAX         TimeStamp
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+      "rtpRcvrRRTime is the value of SysUpTime at the time that the
+       last RTCP Receiver Report was received from this receiver, in
+       the case of a monitor or RR receiver (the RTP Sender).  It is
+       the  value of SysUpTime at the time that the last RR was sent by
+       this receiver in the case of an RTP receiver sending the RR."
+    ::= { rtpRcvrEntry 10 }
+
+rtpRcvrPT OBJECT-TYPE
+    SYNTAX          INTEGER (0..127)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Static or dynamic payload type from the RTP header (see
+       RFC 1889, 'RTP: A Transport Protocol for Real-Time
+       Applications' sec. 5)."
+    ::= { rtpRcvrEntry 11 }
+
+rtpRcvrPackets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Count of RTP packets received by this RTP host receiver
+       since rtpRcvrStartTime."
+    ::= { rtpRcvrEntry 12 }
+
+rtpRcvrOctets OBJECT-TYPE
+    SYNTAX          Counter64
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "Count of non-header RTP octets received by this receiving RTP
+       host since rtpRcvrStartTime."
+    ::= { rtpRcvrEntry 13 }
+
+rtpRcvrStartTime OBJECT-TYPE
+    SYNTAX          TimeStamp
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+      "The value of SysUpTime at the time that this row was
+       created."
+    ::= { rtpRcvrEntry 14 }
+
+--
+--  MODULE GROUPS
+--
+--
+-- There are two types of RTP Systems, RTP hosts and RTP Monitors.
+-- Thus there are three kinds of objects: 1) Objects common to both
+-- kinds of systems, 2) Objects unique to RTP Hosts and 3) Objects
+-- unique to RTP Monitors.  There is a fourth group, 4) Objects that
+-- SHOULD be implemented by Multicast hosts and RTP Monitors
+
+rtpGroups OBJECT IDENTIFIER ::= { rtpConformance 1 }
+rtpSystemGroup      OBJECT-GROUP
+    OBJECTS         {
+                    rtpSessionDomain,
+                    rtpSessionRemAddr,
+                    rtpSessionIfIndex,
+                    rtpSessionSenderJoins,
+                    rtpSessionReceiverJoins,
+                    rtpSessionStartTime,
+                    rtpSessionByes,
+                    rtpSessionMonitor,
+                    rtpSenderCNAME,
+                    rtpSenderAddr,
+                    rtpSenderPackets,
+                    rtpSenderOctets,
+                    rtpSenderTool,
+                    rtpSenderSRs,
+                    rtpSenderSRTime,
+                    rtpSenderStartTime,
+                    rtpRcvrCNAME,
+                    rtpRcvrAddr,
+                    rtpRcvrLostPackets,
+                    rtpRcvrJitter,
+                    rtpRcvrTool,
+                    rtpRcvrRRs,
+                    rtpRcvrRRTime,
+                    rtpRcvrStartTime
+                    }
+    STATUS          current
+    DESCRIPTION
+        "Objects available to all RTP Systems."
+    ::= { rtpGroups 1 }
+
+rtpHostGroup    OBJECT-GROUP
+    OBJECTS     {
+                rtpSessionLocAddr,
+                rtpSenderPT,
+                rtpRcvrPT,
+                rtpRcvrRTT,
+                rtpRcvrOctets,
+                rtpRcvrPackets
+                }
+    STATUS      current
+    DESCRIPTION
+           "Objects that are available to RTP Host systems, but may not
+            be available to RTP Monitor systems."
+    ::= { rtpGroups 2 }
+
+rtpMonitorGroup OBJECT-GROUP
+    OBJECTS     {
+                rtpSessionNewIndex,
+                rtpSessionRowStatus
+                }
+    STATUS      current
+    DESCRIPTION
+        "Objects used to create rows in the RTP Session Table.  These
+        objects are not needed if the system does not create rows."
+    ::= { rtpGroups 3 }
+
+rtpInverseGroup OBJECT-GROUP
+    OBJECTS     {
+                rtpSessionInverseStartTime,
+                rtpSenderInverseStartTime,
+                rtpRcvrInverseStartTime
+                }
+    STATUS      current
+    DESCRIPTION
+            "Objects used in the Inverse Lookup Tables."
+    ::= { rtpGroups 4 }
+
+--
+--  Compliance
+--
+rtpCompliances OBJECT IDENTIFIER ::= { rtpConformance 2 }
+
+rtpHostCompliance MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+            "Host implementations MUST comply."
+    MODULE           RTP-MIB
+    MANDATORY-GROUPS {
+                     rtpSystemGroup,
+                     rtpHostGroup
+                     }
+    GROUP            rtpMonitorGroup
+    DESCRIPTION
+        "Host systems my optionally support row creation and deletion.
+         This would allow an RTP Host system to act as an RTP Monitor."
+    GROUP            rtpInverseGroup
+    DESCRIPTION
+        "Multicast RTP Systems SHOULD implement the optional
+         tables."
+        OBJECT  rtpSessionNewIndex
+            MIN-ACCESS not-accessible
+                DESCRIPTION
+                 "RTP system implementations support of
+                  row creation and deletion is OPTIONAL so
+                  implementation of this object is OPTIONAL."
+        OBJECT  rtpSessionDomain
+           MIN-ACCESS read-only
+                DESCRIPTION
+                 "RTP system implementation support of
+                  row creation and deletion is OPTIONAL.  When
+                  it is not supported so write access is
+                  OPTIONAL."
+        OBJECT  rtpSessionRemAddr
+            MIN-ACCESS read-only
+              DESCRIPTION
+               "Row creation and deletion is OPTIONAL so
+                read-create access to this object is OPTIONAL."
+        OBJECT  rtpSessionIfIndex
+            MIN-ACCESS read-only
+              DESCRIPTION
+               "Row creation and deletion is OPTIONAL so
+                read-create access to this object is OPTIONAL."
+        OBJECT  rtpSessionRowStatus
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Row creation and deletion is OPTIONAL so
+                read-create access to this object is OPTIONAL."
+        OBJECT  rtpSessionInverseStartTime
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Multicast RTP Systems SHOULD implement the optional
+                tables."
+
+        OBJECT  rtpSenderInverseStartTime
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Multicast RTP Systems SHOULD implement the optional
+                tables."
+        OBJECT  rtpRcvrInverseStartTime
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Multicast RTP Systems SHOULD implement the optional
+                tables."
+    ::= { rtpCompliances 1 }
+
+rtpMonitorCompliance MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+          "Monitor implementations must comply.  RTP Monitors are not
+          required to support creation or deletion."
+    MODULE           RTP-MIB
+    MANDATORY-GROUPS     {
+                         rtpSystemGroup,
+                         rtpMonitorGroup
+                         }
+    GROUP                rtpHostGroup
+    DESCRIPTION
+        "Monitor implementations may not have access to values in the
+         rtpHostGroup."
+    GROUP                rtpInverseGroup
+    DESCRIPTION
+        "Multicast RTP Systems SHOULD implement the optional
+         tables."
+        OBJECT  rtpSessionLocAddr
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "RTP monitor sourcing of RTP or RTCP data packets
+                is OPTIONAL and implementation of this object is
+                OPTIONAL."
+        OBJECT  rtpRcvrPT
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "RTP monitor systems may not support
+                retrieval of the RTP Payload Type from the RTP
+                header (and may receive RTCP messages only).  When
+                queried for the payload type information"
+        OBJECT  rtpSenderPT
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "RTP monitor systems may not support
+                retrieval of the RTP Payload Type from the RTP
+
+                header (and may receive RTCP messages only).  When
+                queried for the payload type information."
+        OBJECT  rtpRcvrOctets
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "RTP monitor systems may receive only the RTCP messages
+                and not the RTP messages that contain the octet count
+                of the RTP message.  Thus implementation of this
+                object is OPTIONAL"
+        OBJECT  rtpRcvrPackets
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "RTP monitor systems may receive only the RTCP messages
+                and not the RTP messages that contain the octet count
+                of the RTP message.  Thus implementation of this
+                object is OPTIONAL."
+        OBJECT  rtpSessionIfIndex
+            MIN-ACCESS read-only
+              DESCRIPTION
+               "Row creation and deletion is OPTIONAL so
+                read-create access to this object is OPTIONAL."
+        OBJECT  rtpSessionInverseStartTime
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Multicast RTP Systems SHOULD implement the optional
+                tables."
+        OBJECT  rtpSenderInverseStartTime
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Multicast RTP Systems SHOULD implement the optional
+                tables."
+        OBJECT  rtpRcvrInverseStartTime
+            MIN-ACCESS not-accessible
+              DESCRIPTION
+               "Multicast RTP Systems SHOULD implement the optional
+                tables."
+    ::= { rtpCompliances 2 }
+END
diff --git a/snmp_builder/mibs/SCSI-MIB.mib b/snmp_builder/mibs/SCSI-MIB.mib
new file mode 100644
index 0000000..18f8a24
--- /dev/null
+++ b/snmp_builder/mibs/SCSI-MIB.mib
@@ -0,0 +1,2758 @@
+SCSI-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+   MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
+   NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32,
+   Counter64, Gauge32,
+   mib-2                                     FROM SNMPv2-SMI
+   TEXTUAL-CONVENTION, TimeStamp, TruthValue,
+   RowStatus, RowPointer, AutonomousType,
+   StorageType                               FROM SNMPv2-TC
+   MODULE-COMPLIANCE, OBJECT-GROUP,
+   NOTIFICATION-GROUP                        FROM SNMPv2-CONF
+   SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB;
+
+scsiMIB MODULE-IDENTITY
+     LAST-UPDATED "200603300000Z"        -- 30th March 2006
+     ORGANIZATION "IETF"
+     CONTACT-INFO "
+          Michele Hallak-Stamler
+
+          Sanrad Intelligent Network
+          27 Habarzel Street
+          Tel Aviv, Israel
+          Phone: +972 3 7674809
+          E-mail: michele@sanrad.com
+
+          Yaron Lederman
+          Siliquent Technologies Ltd.
+          21 Etzel Street
+          Ramat Gan, Israel
+          Phone: +972 54 5308833
+          E-mail: yaronled@bezeqint.net
+
+          Mark Bakke
+          Postal: Cisco Systems, Inc
+          7900 International Drive, Suite 400
+          Bloomington, MN
+          USA 55425
+          E-mail: mbakke@cisco.com
+
+          Marjorie Krueger
+          Postal: Hewlett-Packard
+          8000 Foothills Blvd.
+          Roseville, CA 95747
+          E-mail: marjorie_krueger@hp.com
+
+          Keith McCloghrie
+          Cisco Systems, Inc.
+          Postal: 170 West Tasman Drive
+          San Jose, CA USA 95134
+          Phone: +1 408 526-5260
+          E-mail: kzm@cisco.com
+         "
+     DESCRIPTION
+          "The SCSI MIB Module.
+          Copyright (C) The Internet Society (2006).  This version of
+          this MIB module is part of RFC 4455; see the RFC
+          itself for full legal notices."
+
+   -- Revision History
+
+     REVISION     "200603300000Z"
+     DESCRIPTION  " Initial version published as RFC 4455."
+::= { mib-2 139}
+
+--****************** Textual Conventions **************************
+ScsiLUN  ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "This textual convention represents a SCSI Logical Unit
+        Number (LUN).  The format of a LUN is documented in Tables
+        A.2 and A.3 of SAM-2 [SAM2]."
+     REFERENCE
+      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
+     SYNTAX OCTET STRING (SIZE ( 2 | 8))
+
+ScsiIndexValue ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+        "An arbitrary integer value, greater than zero, for use
+        as a unique index value."
+     SYNTAX Unsigned32 (1..4294967295)
+
+ScsiPortIndexValueOrZero ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+      "This textual convention is an extension of the ScsiIndexValue
+       convention.  The latter defines a greater than zero value used
+       to identify an index.  This extension permits the additional
+       value of zero and is applicable only to indices of SCSI port.
+       Usage of the zero is object-specific and must therefore be
+       defined as part of the description of any object that uses
+       this syntax.  Examples of the usage of zero might include
+       situations where the index was unknown, or when none or all
+       indices need to be referenced."
+     SYNTAX Unsigned32 (0..4294967295)
+
+ScsiIndexValueOrZero ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+      "This textual convention is an extension of the ScsiIndexValue
+       convention.  The latter defines a greater than zero value used
+       to identify an index.  This extension permits the additional
+       value of zero.  Usage of the zero is object-specific and must
+       therefore be defined as part of the description of any object
+       that uses this syntax.  Examples of the usage of zero might
+       include situations where index was unknown, or when none or
+       all indices need to be referenced."
+     SYNTAX Unsigned32 (0..4294967295)
+
+ScsiIdentifier ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+       "This textual convention represents a generic SCSI port
+       identifier.
+       The format depends on the transport used and is documented
+       in Tables A.2 and A.3 of SAM-2 [SAM2]."
+     REFERENCE
+      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
+     SYNTAX OCTET STRING (SIZE (0..262))
+
+ScsiName ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+       "This textual convention represents the name of a SCSI
+       initiator device, a SCSI target device, a SCSI initiator port
+       or a SCSI target port.
+       The format depends on the transport used and is documented
+       in Tables A.4 and A.5 of SAM-2 [SAM2].
+      Every object defined using this syntax must define whether it
+      is
+      a) always used for a port,
+      b) always used for a device, or
+      c) the circumstances under which it is used for a port or
+      device."
+     REFERENCE
+      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
+     SYNTAX OCTET STRING (SIZE (0..262))
+
+ScsiLuNameOrZero  ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+       "This textual convention represents either the name of a SCSI
+       logical unit or a zero-length string.  Objects defined with
+       this syntax must specify the meaning of the zero-length
+       string.
+       The format of the name of a LU is defined as:
+       - a zero-length octet string or
+       - a string of eight bytes."
+     REFERENCE
+      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
+     SYNTAX OCTET STRING (SIZE (0 | 8))
+
+ScsiDeviceOrPort ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+       "This type specifies whether a particular configuration is
+       applicable to a port or to a device."
+     SYNTAX INTEGER  {
+         device(1),
+         port(2),
+         other(3)
+      }
+
+ScsiIdCodeSet ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+       "This textual convention specifies the code set for the
+       identifier contained in an Identification Descriptor returned
+       in a logical unit's Device Identification Page, and is
+       formatted as defined in T10 SPC-2 (see REFERENCE) Table 172 -
+       Code Set"
+     REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+     SYNTAX Unsigned32 (0..15)
+
+ScsiIdAssociation ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+       "This textual convention specifies what the identifier is
+       associated with (e.g., with the addressed physical/logical
+       device or with a particular port) for the identifier
+       contained in an Identification Descriptor returned in a
+       logical unit's Device Identification Page, and is
+       formatted as defined in T10 SPC-2 (see REFERENCE)
+       Table 173 - Association."
+     REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+     SYNTAX Unsigned32 (0..3)
+
+ScsiIdType ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+      "This textual convention specifies the type for the identifier
+       contained in an Identification Descriptor returned in a
+
+       logical unit's Device Identification Page, and is formatted
+       as defined in T10 SPC-2 (see REFERENCE) table 174 - Identifier
+       Type."
+     REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+     SYNTAX Unsigned32 (0..15)
+
+ScsiIdValue ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+      "This textual convention represents an identifier.  The objects
+       of type ScsiIdCodeSet, ScsiIdAssociation, ScsiIdType define
+       together the format.
+       The format is the same as contained in an Identification
+       Descriptor returned in a logical unit's Device Identification
+       Page, and is formatted as defined in T10 SPC-2
+       (see REFERENCE)."
+    REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+     SYNTAX OCTET STRING (SIZE (0..255))
+
+ScsiHrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS current
+     DESCRIPTION
+       "The index value for a software module's row in the Host
+       Resources MIBs hrSWInstalledTable.  A zero value indicates
+       that no row in the hrSWInstalledTable is applicable."
+     REFERENCE
+       "hrSWInstalledTable is defined in the Host Resources MIB,
+       [RFC2790]."
+     SYNTAX   Integer32 (0..2147483647)
+
+--****************** Structure of the MIB **************************
+scsiNotifications OBJECT IDENTIFIER ::= { scsiMIB 0 }
+scsiAdmin         OBJECT IDENTIFIER ::= { scsiMIB 1 }
+scsiObjects       OBJECT IDENTIFIER ::= { scsiMIB 2 }
+scsiConformance   OBJECT IDENTIFIER ::= { scsiMIB 3 }
+
+scsiTransportTypes   OBJECT IDENTIFIER ::= { scsiAdmin 1 }
+scsiGeneral          OBJECT IDENTIFIER ::= { scsiObjects 1 }
+scsiInitiatorDevice  OBJECT IDENTIFIER ::= { scsiObjects 2 }
+scsiTargetDevice     OBJECT IDENTIFIER ::= { scsiObjects 3 }
+
+scsiLogicalUnit      OBJECT IDENTIFIER ::= { scsiObjects 4 }
+
+--****************** Transport Types *******************************
+-- The following object identifiers allow determining the different
+-- transports (service delivery subsystems) in use under the SCSI
+-- layer.
+
+scsiTransportOther   OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies a transport that has no identity; it
+     might happen because the transport is unknown or might not
+     have been defined when this MIB module was created."
+::= { scsiTransportTypes 1 }
+
+scsiTransportSPI     OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies a parallel SCSI transport."
+   REFERENCE
+     "T10 - SCSI Parallel Interface - 4 (SPI-4)
+     - ANSI INCITS 362-2002 [SPI4]"
+::= { scsiTransportTypes 2 }
+
+scsiTransportFCP     OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies a Fibre Channel Protocol for SCSI,
+     Second Version."
+   REFERENCE
+     "T10 - SCSI Fibre Channel Protocol - 2 (FCP-2)
+     - ANSI INCITS 350-2003 [FCP2]"
+::= { scsiTransportTypes 3 }
+
+scsiTransportSRP  OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies a protocol for transporting SCSI over
+     Remote Direct Memory Access (RDMA) interfaces, e.g., InfiniBand
+     (tm)."
+   REFERENCE
+     "T10 - SCSI RDMA Protocol (SRP)
+      - ANSI INCITS 365-2002 [SRP]."
+::= { scsiTransportTypes 4 }
+
+scsiTransportISCSI   OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies an iSCSI transport."
+   REFERENCE
+     "IETF IPS WG - Internet Small Computer Systems Interface
+      (iSCSI) [RFC3720] "
+::= { scsiTransportTypes 5 }
+
+scsiTransportSBP  OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies the Serial Bus Protocol 3."
+   REFERENCE
+     "T10 - Serial Bus Protocol 3 (SBP-3)
+     - ANSI INCITS 375-2004 [SBP3]."
+::= { scsiTransportTypes 6 }
+
+scsiTransportSAS  OBJECT-IDENTITY
+   STATUS   current
+   DESCRIPTION
+     "This identity identifies the Serial Attach SCSI Protocol."
+   REFERENCE
+     "T10 - Serial Attached SCSI - 1.1 (SAS - 1.1)
+     - #1601-D Rev-10 [SAS-1.1]."
+::= { scsiTransportTypes 7 }
+
+--****************** Instance Table *****************************
+scsiInstanceTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF ScsiInstanceEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "A list of SCSI instances present on the system.
+     The SCSI instance is the top-level entity, to which everything
+     else belongs.  An SNMP agent could represent more than one
+     instance if it represents either a stack of devices, or virtual
+     partitions of a larger device, or a host running multiple SCSI
+     implementations from different vendors."
+::= { scsiGeneral 1 }
+
+scsiInstanceEntry OBJECT-TYPE
+   SYNTAX         ScsiInstanceEntry
+   MAX-ACCESS     not-accessible
+   STATUS         current
+   DESCRIPTION
+     "An entry (row) containing management information applicable to
+     a particular SCSI instance."
+   INDEX { scsiInstIndex }
+::= { scsiInstanceTable 1 }
+
+ScsiInstanceEntry ::= SEQUENCE {
+   scsiInstIndex              ScsiIndexValue,
+   scsiInstAlias              SnmpAdminString,
+   scsiInstSoftwareIndex      ScsiHrSWInstalledIndexOrZero,
+   scsiInstVendorVersion      SnmpAdminString,
+   scsiInstScsiNotificationsEnable  TruthValue,
+   scsiInstStorageType        StorageType
+}
+
+scsiInstIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object represents an arbitrary integer used to uniquely
+     identify a particular SCSI instance."
+::= { scsiInstanceEntry 1 }
+
+scsiInstAlias OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..79))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object represents an administrative string, configured by
+     the administrator.  It can be a zero-length string."
+::= { scsiInstanceEntry 2 }
+
+scsiInstSoftwareIndex    OBJECT-TYPE
+   SYNTAX      ScsiHrSWInstalledIndexOrZero
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "If this management instance corresponds to an installed
+     software module, then this object's value is the value of the
+     hrSWInstalledIndex of that module.  If there is no
+     correspondence to an installed software module (or no module
+     that has an hrSWInstalledIndex value), then the value of this
+     object is zero."
+   REFERENCE
+     "hrSWInstalledIndex is defined in the Host Resources MIB,
+     [RFC2790]."
+::= { scsiInstanceEntry 3 }
+
+scsiInstVendorVersion OBJECT-TYPE
+   SYNTAX      SnmpAdminString
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents a text string set by the manufacturer
+     describing the version of this instance.  The format of this
+     string is determined solely by the manufacturer and is for
+     informational purposes only.  It is unrelated to the SCSI
+     specification version numbers."
+::= { scsiInstanceEntry 4 }
+
+scsiInstScsiNotificationsEnable  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object indicates whether notifications defined in this
+      MIB module will be generated."
+   DEFVAL { true }
+::= { scsiInstanceEntry 5 }
+
+scsiInstStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization for
+           this SCSI entity.
+           Specifically, each row in the following tables:
+
+                      scsiIntrDevTable
+                      scsiDscTgtTable
+                      scsiAuthorizedIntrTable
+                      scsiLunMapTable
+
+           has a StorageType as specified by the instance of
+           this object that is INDEXed by the same value of
+           scsiInstIndex.
+           This value of this object is also used to indicate
+           the persistence across reboots of writable values in
+           its row of the scsiInstanceTable.
+           Conceptual rows having the value 'permanent' need not
+           allow write-access to any columnar objects in the row,
+           nor to any object belonging to a table whose entry is
+           INDEXed by the same value of scsiInstIndex."
+    DEFVAL { nonVolatile }
+::= { scsiInstanceEntry 6 }
+
+--******************** Device Table ********************************
+scsiDeviceTable  OBJECT-TYPE
+   SYNTAX           SEQUENCE OF ScsiDeviceEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "A list of SCSI devices contained in each of the SCSI manageable
+     instances that this agent is reporting."
+::= { scsiGeneral 2 }
+
+scsiDeviceEntry OBJECT-TYPE
+   SYNTAX         ScsiDeviceEntry
+   MAX-ACCESS     not-accessible
+   STATUS         current
+   DESCRIPTION
+     "An entry (row) containing management information applicable to
+     a particular SCSI device included in this SCSI manageable
+     instance identifiable by the value of scsiInstIndex."
+   INDEX {scsiInstIndex, scsiDeviceIndex}
+::= { scsiDeviceTable 1 }
+
+ScsiDeviceEntry ::= SEQUENCE {
+   scsiDeviceIndex      ScsiIndexValue,
+   scsiDeviceAlias      SnmpAdminString,
+   scsiDeviceRole       BITS,
+   scsiDevicePortNumber Unsigned32
+}
+
+scsiDeviceIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is an arbitrary integer used to uniquely identify
+     a particular device within a particular SCSI instance."
+::= { scsiDeviceEntry 1 }
+
+scsiDeviceAlias OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..79))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object contains an administrative name for this device.
+     If no name is assigned, the value of this object is the
+     zero-length string.
+     The StorageType of this object is specified by the instance
+     of scsiInstStorageType that is INDEXed by the same value of
+     scsiInstIndex."
+::= { scsiDeviceEntry 2 }
+
+scsiDeviceRole OBJECT-TYPE
+   SYNTAX      BITS {
+         target(0),
+         initiator(1)
+   }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object determines whether this device is acting as a
+     SCSI initiator device, or as a SCSI target device, or as both."
+::= { scsiDeviceEntry 3 }
+
+scsiDevicePortNumber OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of ports contained in this
+     device."
+::= { scsiDeviceEntry 4 }
+
+--****************** Port Table ************************************
+scsiPortTable  OBJECT-TYPE
+   SYNTAX  SEQUENCE OF ScsiPortEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "A list of SCSI ports for each SCSI device in each instance."
+::= { scsiGeneral 3 }
+
+scsiPortEntry OBJECT-TYPE
+   SYNTAX            ScsiPortEntry
+   MAX-ACCESS        not-accessible
+   STATUS            current
+   DESCRIPTION
+     "An entry (row) containing management information applicable to
+     a particular SCSI port of a particular SCSI device in a
+     particular SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex }
+::= { scsiPortTable  1 }
+
+ScsiPortEntry ::= SEQUENCE {
+   scsiPortIndex        ScsiIndexValue,
+   scsiPortRole         BITS,
+   scsiPortTransportPtr    RowPointer,
+   scsiPortBusyStatuses Counter32
+}
+
+scsiPortIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An arbitrary integer used to uniquely identify a particular
+     port of a given device within a particular SCSI instance."
+::= { scsiPortEntry 1 }
+
+scsiPortRole OBJECT-TYPE
+   SYNTAX      BITS {
+         target(0),
+         initiator(1)
+   }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates whether this port is acting as a
+     SCSI initiator port, or as a SCSI target port or as both."
+::= { scsiPortEntry 2 }
+
+scsiPortTransportPtr OBJECT-TYPE
+   SYNTAX      RowPointer
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object is a pointer to the corresponding row in the
+     scsiTransportTable.  This row contains information on the
+     transport such as transport type and port name."
+::= { scsiPortEntry 3 }
+
+scsiPortBusyStatuses OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of port busy statuses sent or
+     received by this port.  Note: Initiator ports only receive busy
+     status and SCSI target ports only send busy status.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiPortEntry 4 }
+
+--******************** Table of supported transports ***************
+scsiTransportTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF ScsiTransportEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table contains the device transport-specific information
+     for each transport connected to each device in
+     scsiDeviceTable."
+::= { scsiGeneral 5 }
+
+scsiTransportEntry OBJECT-TYPE
+   SYNTAX      ScsiTransportEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry (row) containing parameters applicable to a transport
+     used by a particular device of a particular SCSI manageable
+     instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiTransportIndex}
+::= { scsiTransportTable 1 }
+
+ScsiTransportEntry ::= SEQUENCE {
+   scsiTransportIndex   ScsiIndexValue,
+   scsiTransportType    AutonomousType,
+   scsiTransportPointer RowPointer,
+   scsiTransportDevName ScsiName
+}
+
+scsiTransportIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An arbitrary integer used to uniquely identify a particular
+     transport within a given device within a particular SCSI
+     instance."
+::= { scsiTransportEntry 1 }
+
+scsiTransportType OBJECT-TYPE
+   SYNTAX      AutonomousType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object identifies the transport type of this row of the
+     transport table.  For example, if this object has the value
+     scsiTransportFCP, then the identified transport is FCP."
+::= { scsiTransportEntry 2 }
+
+scsiTransportPointer OBJECT-TYPE
+   SYNTAX      RowPointer
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents a pointer to a conceptual row in a
+     'transport' MIB module allowing a manager to get useful
+     information for the transport described by this entry.
+     For example, if the transport of this device is iSCSI, this
+     object will point to the iSCSI Instance of the iSCSI MIB
+     module.
+     If there is no MIB for this transport, this object has the
+     value 0.0."
+::= { scsiTransportEntry 3 }
+
+scsiTransportDevName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the name of this device in one of the
+     format(s) appropriate for this type of transport."
+::= { scsiTransportEntry 4 }
+
+--******************** SCSI Initiator Device Table ***************
+scsiIntrDevTable  OBJECT-TYPE
+   SYNTAX           SEQUENCE OF ScsiIntrDevEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "This table contains information for each local SCSI initiator
+     device in each instance."
+::= { scsiInitiatorDevice 1}
+
+scsiIntrDevEntry OBJECT-TYPE
+   SYNTAX           ScsiIntrDevEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "An entry (row) containing information applicable to a SCSI
+     initiator device within a particular SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex }
+::= { scsiIntrDevTable  1 }
+
+ScsiIntrDevEntry ::= SEQUENCE {
+   scsiIntrDevTgtAccessMode   INTEGER,
+   scsiIntrDevOutResets       Counter32
+}
+
+scsiIntrDevTgtAccessMode   OBJECT-TYPE
+   SYNTAX      INTEGER {
+
+         unknown(1),
+         autoEnable(2),
+         manualEnable(3)
+   }
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+     "This object controls whether or not a discovered SCSI target
+     device is immediately authorized:
+         - autoEnable (2) means that when a SCSI initiator device
+         discovers a SCSI target device, it can use it immediately.
+         - manualEnable (3) means that the SCSI initiator device
+         must wait for an operator to set scsiIntrDscTgtConfigured
+         = true before it is authorized.
+     The StorageType of this object is specified by the instance
+     of scsiInstStorageType that is INDEXed by the same value of
+     scsiInstIndex."
+::= { scsiIntrDevEntry 1 }
+
+scsiIntrDevOutResets OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the total number of times that this SCSI
+     initiator device has issued
+     - a LOGICAL UNIT RESET or TARGET RESET task management request,
+       or
+     - any other SCSI transport protocol-specific action or event
+       that causes a Logical Unit Reset or a Hard Reset at one or
+       more SCSI target ports ([SAM2] chapters 5.9.6, 5.9.7).
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+   REFERENCE
+      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+      T10 Project 1157-D, 12 September 2002
+      Chapters 5.9.6 & 5.9.7 [SAM2]"
+::= { scsiIntrDevEntry 2 }
+
+-- The following section describes managed objects related to
+-- SCSI initiator ports.
+
+scsiIntrPortTable OBJECT-TYPE
+   SYNTAX          SEQUENCE OF ScsiIntrPortEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "This table contains all the SCSI initiator ports for each
+     local SCSI initiator or target/initiator devices in each SCSI
+     instance."
+::= { scsiInitiatorDevice 2 }
+
+scsiIntrPortEntry OBJECT-TYPE
+   SYNTAX          ScsiIntrPortEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "An entry (row) containing information applicable to a
+     particular SCSI initiator port of a particular SCSI device
+     within a SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex }
+::= { scsiIntrPortTable 1 }
+
+ScsiIntrPortEntry ::= SEQUENCE {
+   scsiIntrPortName           ScsiName,
+   scsiIntrPortIdentifier     ScsiIdentifier,
+   scsiIntrPortOutCommands    Counter32,
+   scsiIntrPortWrittenMegaBytes  Counter32,
+   scsiIntrPortReadMegaBytes  Counter32,
+   scsiIntrPortHSOutCommands  Counter64
+}
+
+scsiIntrPortName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the name of the port assigned for use
+     by the SCSI protocol.  The format will depend on the type of
+     transport this port is using."
+::= { scsiIntrPortEntry 1 }
+
+scsiIntrPortIdentifier OBJECT-TYPE
+   SYNTAX      ScsiIdentifier
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the identifier of the port in one of
+     the format(s) appropriate for the type of transport in use."
+::= { scsiIntrPortEntry 2 }
+
+scsiIntrPortOutCommands OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands sent by this
+     SCSI initiator port.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiIntrPortEntry 3 }
+
+scsiIntrPortWrittenMegaBytes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of data in megabytes sent
+     by this SCSI initiator port.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiIntrPortEntry 4 }
+
+scsiIntrPortReadMegaBytes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of data in megabytes
+     received by this SCSI initiator port.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiIntrPortEntry 5 }
+
+scsiIntrPortHSOutCommands  OBJECT-TYPE
+   SYNTAX      Counter64
+   UNITS       "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands sent by this
+     SCSI initiator port.  This object provides support for systems
+     that can quickly generate a large number of commands because
+     they run at high speed.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiIntrPortEntry 6 }
+
+--******************** Discovered SCSI Target Device group ********
+scsiRemoteTgtDev OBJECT IDENTIFIER ::= { scsiInitiatorDevice 3 }
+
+-- SCSI target device discovered or authorized to attach each of the
+-- SCSI initiator ports of each SCSI initiator device of each
+-- instance.
+
+scsiDscTgtTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF ScsiDscTgtEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table includes all the remote (not in the local system)
+     SCSI target ports that are authorized to attach to each local
+     SCSI initiator port of this SCSI instance."
+::= { scsiRemoteTgtDev 1 }
+
+scsiDscTgtEntry OBJECT-TYPE
+   SYNTAX         ScsiDscTgtEntry
+   MAX-ACCESS     not-accessible
+   STATUS         current
+   DESCRIPTION
+     "Each entry (row) contains information about the SCSI target
+     device or port to which this SCSI initiator port (or all SCSI
+     initiator ports in the SCSI initiator entry indexed by
+     scsiInstIndex, scsiDeviceIndex) will attempt to attach.  The
+     entry is either for all local ports (if scsiDscTgtIntrPortIndex
+     is zero) or only for the specific SCSI initiator port
+     identified by scsiDscTgtIntrPortIndex.  Note that if an entry in
+     this table is deleted, any corresponding entries in the
+     scsiDscLunsTable must be deleted as well.
+     The StorageType of a row in this table is specified by the
+     instance of scsiInstStorageType that is INDEXed by the same
+     value of scsiInstIndex."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
+   scsiDscTgtIndex }
+::= { scsiDscTgtTable 1 }
+
+ScsiDscTgtEntry ::= SEQUENCE {
+   scsiDscTgtIntrPortIndex ScsiPortIndexValueOrZero,
+   scsiDscTgtIndex         ScsiIndexValue,
+   scsiDscTgtDevOrPort     ScsiDeviceOrPort,
+   scsiDscTgtName          ScsiName,
+   scsiDscTgtConfigured    TruthValue,
+   scsiDscTgtDiscovered    TruthValue,
+   scsiDscTgtInCommands    Counter32,
+   scsiDscTgtWrittenMegaBytes Counter32,
+   scsiDscTgtReadMegaBytes Counter32,
+   scsiDscTgtHSInCommands  Counter64,
+   scsiDscTgtLastCreation  TimeStamp,
+   scsiDscTgtRowStatus     RowStatus
+}
+
+scsiDscTgtIntrPortIndex OBJECT-TYPE
+   SYNTAX      ScsiPortIndexValueOrZero
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object relates to a particular local device within a
+     particular SCSI instance and specifies
+     - the index of the local SCSI initiator port,
+     - or zero, if this entry refers to the local device and
+     therefore refers to all the local SCSI initiator ports."
+::= { scsiDscTgtEntry 1 }
+
+scsiDscTgtIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is an arbitrary integer used to uniquely identify
+     a particular SCSI target device either discovered by, or
+     configured for use with, one or more ports scsiDscTgtName of
+     a particular device within a particular SCSI instance."
+::= { scsiDscTgtEntry 2 }
+
+scsiDscTgtDevOrPort OBJECT-TYPE
+   SYNTAX      ScsiDeviceOrPort
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object indicates whether this entry describes a
+     configured SCSI target device name (and applies to all ports
+     on the identified SCSI target device) or an individual SCSI
+     target port."
+::= { scsiDscTgtEntry 3 }
+
+scsiDscTgtName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object represents the name of this configured or
+     discovered SCSI target device or port depending on the value
+     of scsiDscTgtDevOrPort."
+   ::= { scsiDscTgtEntry 4 }
+
+scsiDscTgtConfigured OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object means
+      -true(1): this entry has been configured by an administrator.
+      -false(2): this entry has been added from a discovery
+     mechanism (e.g., SendTargets, SLP, iSNS).
+     An administrator can modify this value from false to true."
+   DEFVAL { true }
+::= { scsiDscTgtEntry 5 }
+
+scsiDscTgtDiscovered OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object means
+      -true(1): this entry has been discovered by the SCSI instance
+      as result of an automatic discovery process.
+      -false(2):this entry has been added by manual configuration.
+     This entry is read-only because an administrator cannot change
+     it.
+     Note that it is an implementation decision to determine how
+     long to retain a row with configured=false, such as when the
+     SCSI target device is no longer visible/accessible to the local
+     SCSI initiator device."
+::= { scsiDscTgtEntry 6 }
+
+scsiDscTgtInCommands OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This object represents the number of commands received from
+      this SCSI target port or device.
+      Discontinuities in the value of this counter can occur at re-
+      initialization of the management system, and at other times as
+      indicated by the value of scsiDscTgtLastCreation."
+::= { scsiDscTgtEntry 7 }
+
+scsiDscTgtWrittenMegaBytes OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of megabytes of data sent as
+     the result of WRITE commands to this SCSI target port or device.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiDscTgtLastCreation."
+::= { scsiDscTgtEntry 8 }
+
+scsiDscTgtReadMegaBytes OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of megabytes received as the
+     result of READ commands to this SCSI target port or device.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiDscTgtLastCreation."
+::= { scsiDscTgtEntry 9 }
+
+scsiDscTgtHSInCommands OBJECT-TYPE
+   SYNTAX      Counter64
+   UNITS       "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands received by this
+     SCSI target port or device.  This object provides support for
+     system that can quickly generate a large number of commands
+     because they run at high speed.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiDscTgtLastCreation."
+::= { scsiDscTgtEntry 10 }
+
+scsiDscTgtLastCreation OBJECT-TYPE
+   SYNTAX      TimeStamp
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the value of sysUpTime when this row
+     was created."
+::= { scsiDscTgtEntry 11 }
+
+scsiDscTgtRowStatus OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object allows an administrator to configure dynamically a
+     new entry in this table via SNMP or eventually delete it.
+     An administrator is not allowed to delete an entry for which
+     the value of the object scsiIntrDscTgtDiscovered is equal to
+     true.
+     Note that when an entry in this table is deleted, then any
+     corresponding entries in the scsiDscLunsTable must also be
+     automatically deleted.
+
+     A newly created row cannot be made active until a value has
+     been set for scsiDscTgtName.  In this case, the value of the
+     corresponding instance of the scsiDscTgtRowStatus column will
+     stay 'notReady'.
+     The RowStatus TC [RFC2579] requires that this DESCRIPTION
+     clause states under which circumstances other objects in this
+     row can be modified:
+     The value of this object has no effect on whether other objects
+     in this conceptual row can be modified."
+::= { scsiDscTgtEntry 12 }
+
+--********************** LUNs discovered ***************************
+scsiDscLunTable OBJECT-TYPE
+   SYNTAX          SEQUENCE OF ScsiDscLunEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "This table includes all the remote (not in the local system)
+     logical unit numbers (LUNs) discovered via each local SCSI
+     initiator port of each local device within a particular SCSI
+     instance."
+::= { scsiRemoteTgtDev 2 }
+
+scsiDscLunEntry OBJECT-TYPE
+   SYNTAX          ScsiDscLunEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "An entry (row) represents a discovered LUN at a particular
+     SCSI target device (scsiDscTgtIndex), where the LUN was
+     discovered by a particular local SCSI initiator device within a
+     particular SCSI instance, possibly via a particular local
+     SCSI initiator port.
+     Note that when an entry in the scsiDscTgtTable is deleted,
+     all corresponding entries in this table should automatically be
+     deleted."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
+   scsiDscTgtIndex, scsiDscLunIndex }
+::= { scsiDscLunTable 1 }
+
+ScsiDscLunEntry ::= SEQUENCE {
+   scsiDscLunIndex   ScsiIndexValue,
+   scsiDscLunLun     ScsiLUN
+}
+
+scsiDscLunIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is an arbitrary integer used to uniquely identify
+     a particular LUN discovered by a particular SCSI initiator port
+     or a particular SCSI initiator device within a particular SCSI
+     instance.
+     Entries in the scsiDscLunIdTable are associated with a LUN by
+     having the value of this object in their INDEX."
+::= { scsiDscLunEntry 1 }
+
+scsiDscLunLun  OBJECT-TYPE
+   SYNTAX      ScsiLUN
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object contains the Logical Unit Number (LUN) of the
+     discovered logical unit."
+::= { scsiDscLunEntry 2 }
+
+--******************** LU Identifiers discovered *******************
+scsiDscLunIdTable OBJECT-TYPE
+   SYNTAX          SEQUENCE OF ScsiDscLunIdEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "This table includes all the known LU identifiers of the remote
+     (not in the local system) logical units discovered via each
+     local SCSI initiator port or device of this SCSI instance."
+::= { scsiRemoteTgtDev 3 }
+
+scsiDscLunIdEntry OBJECT-TYPE
+   SYNTAX           ScsiDscLunIdEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "An entry (row) represents the LU identifier of a discovered
+     LUN at a particular SCSI target device (scsiDscTgtIndex), where
+     the LUN was discovered by a particular local SCSI initiator
+     device within a particular SCSI instance, possibly via a
+     particular local SCSI initiator port."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
+   scsiDscTgtIndex, scsiDscLunIndex, scsiDscLunIdIndex }
+::= { scsiDscLunIdTable 1 }
+
+ScsiDscLunIdEntry ::= SEQUENCE {
+   scsiDscLunIdIndex       ScsiIndexValue,
+   scsiDscLunIdCodeSet     ScsiIdCodeSet,
+   scsiDscLunIdAssociation ScsiIdAssociation,
+   scsiDscLunIdType        ScsiIdType,
+   scsiDscLunIdValue       ScsiIdValue
+}
+
+scsiDscLunIdIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is an arbitrary integer used to uniquely identify
+     a particular LUN identifier discovered by each SCSI initiator
+     device or particular SCSI initiator port within a particular
+     SCSI instance."
+::= { scsiDscLunIdEntry 1 }
+
+scsiDscLunIdCodeSet OBJECT-TYPE
+   SYNTAX          ScsiIdCodeSet
+   MAX-ACCESS      read-only
+   STATUS          current
+   DESCRIPTION
+     "This object specifies the code set in use with this
+     identifier.  The value is represented in the same format as
+     is contained in the identifier's Identification Descriptor
+     within the logical unit's Device Identification Page."
+   REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+::= { scsiDscLunIdEntry 2 }
+
+scsiDscLunIdAssociation OBJECT-TYPE
+   SYNTAX          ScsiIdAssociation
+   MAX-ACCESS      read-only
+   STATUS          current
+   DESCRIPTION
+     "This object specifies what the identifier is associated with
+     (e.g., with the addressed physical/logical device or with a
+     particular port).  The value is represented in the same format
+     as is contained in the identifier's Identification Descriptor
+     within the logical unit's Device Identification Page."
+   REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+::= { scsiDscLunIdEntry 3 }
+
+scsiDscLunIdType OBJECT-TYPE
+   SYNTAX          ScsiIdType
+   MAX-ACCESS      read-only
+   STATUS          current
+   DESCRIPTION
+     "This object specifies the type of the identifier.
+     The value is represented in the same format as is contained in
+     the identifier's Identification Descriptor within the logical
+     unit's Device Identification Page."
+   REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+::= { scsiDscLunIdEntry 4 }
+
+scsiDscLunIdValue OBJECT-TYPE
+   SYNTAX         ScsiIdValue
+   MAX-ACCESS     read-only
+   STATUS         current
+   DESCRIPTION
+     "This object represents the actual value of this identifier.
+     The format is defined by the objects scsiDscLunIdCodeSet,
+     scsiDscLunIdAssociation, scsiDscLunIdType.
+     The value is represented in the same format as is contained in
+     the identifier's Identification Descriptor within the logical
+     unit's Device Identification Page."
+     REFERENCE
+       "ANSI - SCSI Primary Commands - 2 (SPC-2),
+       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+       Vital Product Data Parameters [SPC2]"
+::= { scsiDscLunIdEntry 5 }
+
+--***** Table of SCSI Target Device Attached to local SCSI
+--***** Initiator Ports
+scsiAttTgtPortTable OBJECT-TYPE
+   SYNTAX   SEQUENCE OF ScsiAttTgtPortEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table includes all the remote (not in the local system)
+     SCSI target ports that are currently attached to each local
+     SCSI initiator port of this SCSI instance."
+::= { scsiRemoteTgtDev 4 }
+
+scsiAttTgtPortEntry OBJECT-TYPE
+   SYNTAX           ScsiAttTgtPortEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "An entry (row) represents a remote SCSI target port
+     (scsiAttTgtPortIndex) currently attached to a particular
+     SCSI initiator port (scsiPortIndex) of a particular SCSI
+     initiator device within a particular SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex,
+   scsiAttTgtPortIndex }
+::= { scsiAttTgtPortTable 1 }
+
+ScsiAttTgtPortEntry ::= SEQUENCE {
+   scsiAttTgtPortIndex     ScsiIndexValue,
+   scsiAttTgtPortDscTgtIdx ScsiIndexValueOrZero,
+   scsiAttTgtPortName      ScsiName,
+   scsiAttTgtPortIdentifier   ScsiIdentifier
+}
+
+scsiAttTgtPortIndex  OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An arbitrary integer used to uniquely identify a particular
+     SCSI target currently attached to a particular SCSI initiator
+     port of a particular SCSI initiator device within a particular
+     SCSI instance."
+::= { scsiAttTgtPortEntry 1 }
+
+scsiAttTgtPortDscTgtIdx OBJECT-TYPE
+   SYNTAX      ScsiIndexValueOrZero
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object contains the value of the scsiDscTgtIntrPortIndex
+     index variable for the row in the scsiDscTgtTable representing
+     this currently attached SCSI target port.  If the currently
+     attached SCSI target port is not represented in the
+     scsiDscTgtTable, then the value of this object is zero."
+::= { scsiAttTgtPortEntry 2 }
+
+scsiAttTgtPortName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object contains the name of the attached SCSI target
+     port."
+::= { scsiAttTgtPortEntry 3 }
+
+scsiAttTgtPortIdentifier OBJECT-TYPE
+   SYNTAX      ScsiIdentifier
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object contains the identifier of the attached SCSI
+     target port."
+::= { scsiAttTgtPortEntry 4 }
+
+-- *****************************************************************
+-- ***** Table of SCSI Target devices
+--
+scsiTgtDevTable OBJECT-TYPE
+   SYNTAX   SEQUENCE OF ScsiTgtDevEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "This table contains information about each local SCSI target
+     device."
+::= { scsiTargetDevice 1 }
+
+scsiTgtDevEntry OBJECT-TYPE
+   SYNTAX           ScsiTgtDevEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "An entry (row) containing information applicable to a
+     particular local SCSI target device within a particular SCSI
+     instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex }
+::= { scsiTgtDevTable 1 }
+
+ScsiTgtDevEntry ::= SEQUENCE {
+   scsiTgtDevNumberOfLUs   Gauge32,
+   scsiTgtDeviceStatus     INTEGER,
+   scsiTgtDevNonAccessibleLUs Gauge32,
+   scsiTgtDevResets        Counter32
+
+}
+
+scsiTgtDevNumberOfLUs OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object is the number of logical units accessible via this
+     local SCSI target device."
+::= { scsiTgtDevEntry 1 }
+
+scsiTgtDeviceStatus  OBJECT-TYPE
+   SYNTAX      INTEGER {
+      unknown(1),
+      available(2),
+      broken(3),
+      readying(4),
+      abnormal(5),
+      nonAddrFailure(6),
+      nonAddrFailReadying(7),
+      nonAddrFailAbnormal(8)
+   }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the status of this SCSI device,
+     summarizing the state of both the addressable devices (i.e.,
+     the logical units) and the non-addressable devices within this
+     SCSI device:
+          - unknown(1): This value is used when the status cannot be
+          determined
+          - available(2): All addressable and non-addressable
+          devices within the SCSI device are fully operational (i.e.,
+          no logical units have an abnormal status).
+          - broken(3): The SCSI device is not operational and cannot
+          be made operational without external intervention.
+          - readying(4): One or more logical units within the SCSI
+          device are being initialized and access to the SCSI device
+          is temporarily limited (i.e., one or more of the logical
+          units have a readying status).
+          - abnormal(5): One or more addressable devices within the
+          SCSI device are indicating a status other than available;
+          nevertheless, the SCSI device is operational (i.e., one or
+          more of the logical units have an abnormal status).
+          - nonAddrFailure(6): One or more non-addressable devices
+          within the SCSI device have failed; nevertheless, the SCSI
+          device is operational (i.e., no logical units have an
+          abnormal or readying status).
+
+          - nonAddrFailReadying(7): One or more non-addressable
+          devices within the SCSI device have failed; nevertheless,
+          one or more logical units within the SCSI device are being
+          initialized and access to the SCSI device is temporarily
+          limited.
+          - nonAddrFailAbnormal(8): One or more non-addressable
+          devices within the SCSI device have failed and one or more
+          addressable devices within the SCSI device are indicating a
+          status other than available; however, the SCSI device is
+          operational.
+     "
+   REFERENCE
+     "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
+     6.3.1.8 REPORT STATES service action [SCC2]"
+::= { scsiTgtDevEntry 2}
+
+scsiTgtDevNonAccessibleLUs OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object is the number of logical units existing but not
+     currently accessible via this local SCSI target device."
+::= { scsiTgtDevEntry 3 }
+
+scsiTgtDevResets     OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object counts the number of hard resets encountered
+     by this SCSI target device.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+   REFERENCE
+      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+      T10 Project 1157-D, 12 September 2002 - Chapter 5.9.7 [SAM2]"
+::= { scsiTgtDevEntry 4 }
+
+--******************** SCSI Target Port Table *********************
+scsiTgtPortTable OBJECT-TYPE
+   SYNTAX   SEQUENCE OF ScsiTgtPortEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table includes all the local SCSI target ports of all the
+     local SCSI target devices."
+::= { scsiTargetDevice 2 }
+
+scsiTgtPortEntry OBJECT-TYPE
+   SYNTAX   ScsiTgtPortEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry (row) containing information applicable to a
+     particular local SCSI target port of a particular local SCSI
+     target device within a particular SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex}
+::= { scsiTgtPortTable 1 }
+
+ScsiTgtPortEntry ::= SEQUENCE {
+   scsiTgtPortName         ScsiName,
+   scsiTgtPortIdentifier   ScsiIdentifier,
+   scsiTgtPortInCommands   Counter32,
+   scsiTgtPortWrittenMegaBytes   Counter32,
+   scsiTgtPortReadMegaBytes   Counter32,
+   scsiTgtPortHSInCommands Counter64
+}
+
+scsiTgtPortName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the name of the port assigned for use
+     in the SCSI protocol."
+::= { scsiTgtPortEntry 1 }
+
+scsiTgtPortIdentifier OBJECT-TYPE
+   SYNTAX      ScsiIdentifier
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the identifier of the port in one of
+     the format(s) appropriate for the type of transport."
+::= { scsiTgtPortEntry 2 }
+
+scsiTgtPortInCommands OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands received by this
+     SCSI target port.
+
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiTgtPortEntry 3 }
+
+scsiTgtPortWrittenMegaBytes OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of data written in megabytes
+     by this SCSI target port.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiTgtPortEntry 4 }
+
+scsiTgtPortReadMegaBytes OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of data read in megabytes by
+     this SCSI target port.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiTgtPortEntry 5 }
+
+scsiTgtPortHSInCommands OBJECT-TYPE
+   SYNTAX      Counter64
+   UNITS    "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands received.  This
+     object provides support for systems that can quickly generate a
+     large number of commands because they run at high speed.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system."
+::= { scsiTgtPortEntry 6 }
+
+scsiRemoteIntrDev OBJECT IDENTIFIER ::= { scsiTargetDevice 3 }
+
+-- The scsiAuthorizedIntrTable contains the list of remote initiator
+-- ports that are authorized to be attached to specific SCSI target
+-- ports and on which an administrator would like to keep permanent
+-- information and long term statistics even when not currently
+-- attached.
+
+scsiAuthorizedIntrTable OBJECT-TYPE
+   SYNTAX   SEQUENCE OF ScsiAuthorizedIntrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table includes all the authorized SCSI initiator devices
+     or ports that may attach a SCSI target device
+     (ScsiAuthIntrTgtPortIndex = 0) or port (ScsiAuthIntrTgtPortIndex
+     different than 0) of the local SCSI instance.  Statistics are
+     kept for each such authorization; thus, the authorizations
+     should be configured in the manner that will cause the desired
+     set of statistics to be collected and that will determine the
+     correct LUN map."
+::= { scsiRemoteIntrDev 1 }
+
+scsiAuthorizedIntrEntry OBJECT-TYPE
+   SYNTAX      ScsiAuthorizedIntrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry (row) represents a remote SCSI initiator port or
+     remote SCSI initiator device that may attach to the local SCSI
+     target port or device within a particular SCSI instance.
+     The StorageType of a row in this table is specified by the
+     instance of scsiInstStorageType that is INDEXed by the same
+     value of scsiInstIndex."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiAuthIntrTgtPortIndex,
+   scsiAuthIntrIndex }
+::= { scsiAuthorizedIntrTable 1 }
+
+ScsiAuthorizedIntrEntry ::= SEQUENCE {
+   scsiAuthIntrTgtPortIndex   ScsiPortIndexValueOrZero,
+   scsiAuthIntrIndex          ScsiIndexValue,
+   scsiAuthIntrDevOrPort      ScsiDeviceOrPort,
+   scsiAuthIntrName           ScsiName,
+   scsiAuthIntrLunMapIndex    ScsiIndexValueOrZero,
+   scsiAuthIntrAttachedTimes  Counter32,
+   scsiAuthIntrOutCommands    Counter32,
+   scsiAuthIntrReadMegaBytes  Counter32,
+   scsiAuthIntrWrittenMegaBytes  Counter32,
+   scsiAuthIntrHSOutCommands  Counter64,
+   scsiAuthIntrLastCreation   TimeStamp,
+   scsiAuthIntrRowStatus      RowStatus
+}
+
+scsiAuthIntrTgtPortIndex OBJECT-TYPE
+   SYNTAX      ScsiPortIndexValueOrZero
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object contains either the index of the port or zero, to
+     indicate any port, on the particular local SCSI target device."
+::= { scsiAuthorizedIntrEntry 1 }
+
+scsiAuthIntrIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object is an arbitrary integer used to uniquely identify
+     a SCSI initiator device or port that is authorized to attach
+     to a particular local SCSI target device or port of a particular
+     SCSI instance."
+::= { scsiAuthorizedIntrEntry 2 }
+
+scsiAuthIntrDevOrPort OBJECT-TYPE
+   SYNTAX      ScsiDeviceOrPort
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object specifies whether this entry refers to a remote
+     SCSI initiator port or to a SCSI initiator device.
+     A value of device(1) means that the authorized remote initiator
+     is a SCSI initiator device and includes all of its ports.
+     A value of port(2) means that the authorized remote initiator
+     is a SCSI initiator port."
+::= { scsiAuthorizedIntrEntry 3 }
+
+scsiAuthIntrName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object represents the name of the remote SCSI initiator
+     device or port authorized by this row."
+::= { scsiAuthorizedIntrEntry 4 }
+
+scsiAuthIntrLunMapIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValueOrZero
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object identifies the set of entries in the
+     scsiLunMapTable for which scsiLunMapIndex has the same value as
+     the value of this object.  The identified set of entries
+
+     constitutes the LUN map to be used for accessing logical units
+     when the remote SCSI initiator port or device corresponding to
+     this entry is attached to any local SCSI target port or device
+     corresponding to this entry.
+     Note that this object has a value of zero if this entry should
+     use the default LUN map."
+::= { scsiAuthorizedIntrEntry 5 }
+
+scsiAuthIntrAttachedTimes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "Times"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the number of times that this remote
+     SCSI initiator device or port has transitioned from unattached
+     to attached to this local SCSI target device or port.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiAuthIntrLastCreation."
+::= { scsiAuthorizedIntrEntry 6 }
+
+scsiAuthIntrOutCommands OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the number of commands that the remote
+     SCSI initiator device or port corresponding to this entry has
+     sent to the local SCSI target device or port corresponding to
+     this entry.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiAuthIntrLastCreation."
+::= { scsiAuthorizedIntrEntry 7 }
+
+scsiAuthIntrReadMegaBytes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the amount of data in megabytes that
+     the remote SCSI initiator device or port corresponding to this
+     entry has read from the local SCSI target device or port
+     corresponding to this entry.
+     Discontinuities in the value of this counter can occur at re-
+
+     initialization of the management system, and at other times as
+     indicated by the value of scsiAuthIntrLastCreation."
+::= { scsiAuthorizedIntrEntry 8 }
+
+scsiAuthIntrWrittenMegaBytes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS    "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the amount of data in megabytes that the
+     remote SCSI initiator device or port corresponding to this
+     entry has written to the local SCSI target device or port
+     corresponding to this entry.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiAuthIntrLastCreation."
+::= { scsiAuthorizedIntrEntry 9}
+
+scsiAuthIntrHSOutCommands  OBJECT-TYPE
+   SYNTAX      Counter64
+   UNITS    "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands sent by the
+     remote SCSI initiator device or port corresponding to this
+     entry to the local SCSI target device or port corresponding to
+     this entry.  This object provides support for systems that can
+     quickly generate a large number of commands because they run at
+     high speed.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiAuthIntrLastCreation."
+::= { scsiAuthorizedIntrEntry 10 }
+
+scsiAuthIntrLastCreation OBJECT-TYPE
+   SYNTAX      TimeStamp
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the value of sysUpTime when this row was
+     last created."
+::= { scsiAuthorizedIntrEntry 11 }
+
+scsiAuthIntrRowStatus OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "This object allows an administrator to create or delete this
+     entry.
+     A newly created row cannot be made active until a value has
+     been set for scsiAuthIntrName.  In this case, the value of the
+     corresponding instance of the scsiAuthIntrRowStatus column will
+     stay 'notReady'.
+     The RowStatus TC [RFC2579] requires that this DESCRIPTION
+     clause states under which circumstances other objects in this
+     row can be modified:
+     The value of this object has no effect on whether other objects
+     in this conceptual row can be modified."
+::= { scsiAuthorizedIntrEntry 12 }
+
+-- Table of SCSI initiator devices or ports attached to local
+-- SCSI target ports
+--
+
+scsiAttIntrPortTable OBJECT-TYPE
+   SYNTAX  SEQUENCE OF ScsiAttIntrPortEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "This table includes all the remote SCSI initiator ports that
+     are currently attached to a local SCSI target port of all local
+     devices within all SCSI instances."
+::= { scsiRemoteIntrDev 2 }
+
+scsiAttIntrPortEntry OBJECT-TYPE
+   SYNTAX          ScsiAttIntrPortEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "An entry (row) represents a remote SCSI initiator port
+     currently attached to a particular local SCSI target port of a
+     particular SCSI target device of a particular SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex,
+   scsiAttIntrPortIndex }
+::= { scsiAttIntrPortTable 1 }
+
+ScsiAttIntrPortEntry ::= SEQUENCE {
+   scsiAttIntrPortIndex    ScsiIndexValue,
+   scsiAttIntrPortAuthIntrIdx ScsiIndexValueOrZero,
+   scsiAttIntrPortName     ScsiName,
+   scsiAttIntrPortIdentifier       ScsiIdentifier
+}
+
+scsiAttIntrPortIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object represents an arbitrary integer used to uniquely
+     identify a particular attached remote initiator port to a
+     particular SCSI target port within a particular SCSI target
+     device within a particular SCSI instance."
+::= { scsiAttIntrPortEntry 1 }
+
+scsiAttIntrPortAuthIntrIdx OBJECT-TYPE
+   SYNTAX      ScsiIndexValueOrZero
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object is the corresponding index in the
+     scsiAuthorizedIntrTable for this current attached remote
+     SCSI initiator device or zero if this remote attached SCSI
+     initiator device is not configured in that table."
+::= { scsiAttIntrPortEntry 2 }
+
+scsiAttIntrPortName OBJECT-TYPE
+   SYNTAX      ScsiName
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the name of the remote SCSI initiator
+     device attached to this local SCSI target port."
+::= { scsiAttIntrPortEntry 3 }
+
+scsiAttIntrPortIdentifier OBJECT-TYPE
+   SYNTAX      ScsiIdentifier
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the identifier of the remote SCSI
+     initiator device attached to this local SCSI target port."
+::= { scsiAttIntrPortEntry 4 }
+
+--****************** Managed Objects regarding logical units *******
+scsiLuTable OBJECT-TYPE
+   SYNTAX   SEQUENCE OF ScsiLuEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table contains the logical units exposed by local SCSI
+     target devices.
+
+     It includes attributes for the World Wide Name (WWN),
+     scsiLuVendorId, scsiLuProductId, and scsiLuRevisionId, which may
+     also appear in the scsiLuIdTable.  If an implementation exposes
+     a WWN as a LuIdTable entry, it must match the scsiLuWwnName in
+     this table.  If an implementation exposes a (vendor, product,
+     revision) identifier as an LuIdTable entry, each of these fields
+     must match the scsiLuVendorId, scsiLuProductId, and
+     scsiLuRevisionId attributes in this table."
+::= { scsiLogicalUnit 1 }
+
+scsiLuEntry OBJECT-TYPE
+   SYNTAX      ScsiLuEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry (row) contains information applicable to a particular
+     logical unit of a particular local SCSI target device within a
+     particular SCSI instance."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiLuIndex}
+::= { scsiLuTable 1 }
+
+ScsiLuEntry ::= SEQUENCE {
+   scsiLuIndex          ScsiIndexValue,
+   scsiLuDefaultLun     ScsiLUN,
+   scsiLuWwnName        ScsiLuNameOrZero,
+   scsiLuVendorId       SnmpAdminString,
+   scsiLuProductId      SnmpAdminString,
+   scsiLuRevisionId     SnmpAdminString,
+   scsiLuPeripheralType Unsigned32,
+   scsiLuStatus         INTEGER,
+   scsiLuState          BITS,
+   scsiLuInCommands     Counter32,
+   scsiLuReadMegaBytes  Counter32,
+   scsiLuWrittenMegaBytes     Counter32,
+   scsiLuInResets       Counter32,
+   scsiLuOutTaskSetFullStatus    Counter32,
+   scsiLuHSInCommands   Counter64,
+   scsiLuLastCreation   TimeStamp
+}
+
+scsiLuIndex OBJECT-TYPE
+   SYNTAX      ScsiIndexValue
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This object represents an arbitrary integer used to uniquely
+     identify a particular logical unit within a particular SCSI
+     target device within a particular SCSI instance."
+::= { scsiLuEntry 1 }
+
+scsiLuDefaultLun OBJECT-TYPE
+   SYNTAX      ScsiLUN
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the default Logical Unit Number (LUN)
+     for this logical unit; if a SCSI initiator device has not been
+     configured to view this logical unit via an entry in the
+     ScsiLunMapTable, the LU will be visible as scsiLuDefaultLun.
+     If this logical unit does not have a default LUN, it will only
+     be visible if specified via the ScsiLunMapTable, and this
+     object will contain a zero-length string."
+::= { scsiLuEntry 2 }
+
+scsiLuWwnName OBJECT-TYPE
+   SYNTAX      ScsiLuNameOrZero
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the World Wide Name of this LU that is
+     the device identifier of the Vital Product Data (VPD) page name;
+     if there is no WWN for this LU, this object will contain a
+     zero-length string.  If there is more than one identifier, they
+     will be listed in the scsiLuIdTable and this object will contain
+     a zero-length string."
+::= { scsiLuEntry 3 }
+
+scsiLuVendorId OBJECT-TYPE
+   SYNTAX      SnmpAdminString
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents a string identifying the vendor of this
+     LU as reported in the Standard INQUIRY data."
+::= { scsiLuEntry 4 }
+
+scsiLuProductId OBJECT-TYPE
+   SYNTAX      SnmpAdminString
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents a string identifying the product for
+     this LU as reported in the Standard INQUIRY data."
+::= { scsiLuEntry 5 }
+
+scsiLuRevisionId OBJECT-TYPE
+   SYNTAX      SnmpAdminString
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents a string defining the product revision
+     of this LU as reported in the Standard INQUIRY data."
+::= { scsiLuEntry 6 }
+
+scsiLuPeripheralType OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object is the value returned by SCSI Standard INQUIRY
+     data.  It can be: direct-access device, sequential-access
+     device, printer, communication device and so on.
+     The values that can be returned here are defined in SCSI
+     Primary Commands -2."
+   REFERENCE
+     "ANSI - SCSI Primary Commands - 2 (SPC-2),
+     ANSI INCITS 351-2001,11 July 2001 [SPC2]- Table 48."
+::= { scsiLuEntry 7 }
+
+scsiLuStatus   OBJECT-TYPE
+   SYNTAX      INTEGER {
+      unknown(1),
+      available(2),
+      notAvailable(3),
+      broken(4),
+      readying(5),
+      abnormal(6)
+   }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the status of this logical unit:
+       - unknown(1): The status of this logical unit cannot be
+       determined.
+       - available(2): The logical unit is fully operational (i.e.,
+       accepts media access SCSI commands and has no state
+       information to report).
+       - notAvailable(3): The logical unit is capable of being
+       supported but is not available (i.e., no logical unit is
+       currently present or the logical unit is present but not
+       configured for use).
+       - broken(4): The logical unit has failed and cannot respond
+       to SCSI commands.
+       - readying(5): The logical unit is being initialized and
+
+       access is temporarily limited.
+       - abnormal(6): The logical unit has state information
+       available that indicates it is operating with limits.  The
+       scsiLuState indicates what those limits are.
+     "
+   REFERENCE
+     "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
+     6.3.1.8 REPORT STATES service action [SCC2]"
+::= { scsiLuEntry 8 }
+
+scsiLuState OBJECT-TYPE
+   SYNTAX      BITS {
+      dataLost(0),
+      dynamicReconfigurationInProgress(1),
+      exposed(2),
+      fractionallyExposed(3),
+      partiallyExposed(4),
+      protectedRebuild(5),
+      protectionDisabled(6),
+      rebuild(7),
+      recalculate(8),
+      spareInUse(9),
+      verifyInProgress(10)
+   }
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the state of a logical unit and its
+     meaning according to the bit position:
+          0 Data lost: Within the logical unit data has been lost.
+          1 Dynamic reconfiguration in progress: The logical unit is
+               being reconfigured.  In this state all data is still
+               protected.
+          2 Exposed: Within the logical unit data is not protected.
+               In this state all data is still valid; however, loss
+               of data or data availability is unavoidable in the
+               event of a failure.
+          3 Fractionally exposed: Within the logical unit part of
+               the data is not protected.  In this state all data is
+               still valid; however, a failure may cause a loss of
+               data or a loss of data availability.
+          4 Partially exposed: Within the logical unit one or more
+               underlying storage devices have failed.  In this state
+               all data is still protected.
+          5 Protected rebuild: The logical unit is in the process of
+               a rebuild operation.  In this state all data is
+               protected.
+          6 Protection disabled: Within the logical unit the data
+
+               protection method has been disabled.
+               In this state all data is still valid; however,
+               loss of data or data availability is unavoidable
+               in the event of a failure.
+          7 Rebuild: The data protection method is in the process of
+               rebuilding data.  In this state data is not protected.
+          8 Recalculate: The logical unit is in the process of a
+               recalculate operation.
+          9 Spare in use: Within the logical unit a storage device
+               in full or part is being used to store data.  In this
+               state all data is still protected.
+          10 Verify in progress: Within the logical unit data is
+               being verified."
+     REFERENCE
+      "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
+       6.3.1.8 REPORT STATES service action [SCC2]"
+::= { scsiLuEntry 9 }
+
+scsiLuInCommands OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands received by this
+     logical unit.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiLuLastCreation."
+::= { scsiLuEntry 10 }
+
+scsiLuReadMegaBytes OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of data in megabytes read
+     from this logical unit.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiLuLastCreation."
+::= { scsiLuEntry 11 }
+
+scsiLuWrittenMegaBytes OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "Megabytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the amount of data in megabytes written
+     to this logical unit.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiLuLastCreation."
+::= { scsiLuEntry 12 }
+
+scsiLuInResets OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "resets"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of times that this logical
+     unit received
+     - a LOGICAL UNIT RESET or TARGET RESET task management request,
+     or
+     - any other SCSI transport protocol-specific action or event
+     that causes a Logical Unit Reset or a Hard Reset at a SCSI
+     target port of the containing device
+     ([SAM2] Chapters 5.9.6, 5.9.7).
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiLuLastCreation."
+   REFERENCE
+     "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+     T10 Project 1157-D, 12 September 2002 - Chapter 5.9.7 [SAM2]"
+::= { scsiLuEntry 13 }
+
+scsiLuOutTaskSetFullStatus    OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of Task Set full statuses
+     issued for this logical unit.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiLuLastCreation."
+::= { scsiLuEntry 14 }
+
+scsiLuHSInCommands OBJECT-TYPE
+   SYNTAX      Counter64
+   UNITS       "commands"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object represents the number of commands received by this
+     logical unit.  This object provides support for systems that can
+     quickly generate a large number of commands because they run at
+     high speed.
+     Discontinuities in the value of this counter can occur at re-
+     initialization of the management system, and at other times as
+     indicated by the value of scsiLuLastCreation."
+::= { scsiLuEntry 15 }
+
+scsiLuLastCreation OBJECT-TYPE
+   SYNTAX      TimeStamp
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+     "This object indicates the value of sysUpTime when this row was
+     last created."
+::= { scsiLuEntry 16 }
+
+--****************** Logical Unit Identifier Table *****************
+scsiLuIdTable OBJECT-TYPE
+   SYNTAX  SEQUENCE OF ScsiLuIdEntry
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+      "A table of identifiers for all logical units exposed by the
+      local SCSI target device."
+::= { scsiLogicalUnit 2 }
+
+scsiLuIdEntry OBJECT-TYPE
+   SYNTAX      ScsiLuIdEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "An entry (row) containing information applicable to a
+     particular identifier for a particular logical unit of a
+     particular SCSI target device within a particular SCSI
+     instance."
+   INDEX {scsiInstIndex, scsiDeviceIndex, scsiLuIndex, scsiLuIdIndex}
+::= { scsiLuIdTable 1 }
+
+ScsiLuIdEntry ::= SEQUENCE {
+   scsiLuIdIndex        ScsiIndexValue,
+   scsiLuIdCodeSet      ScsiIdCodeSet,
+   scsiLuIdAssociation  ScsiIdAssociation,
+   scsiLuIdType         ScsiIdType,
+   scsiLuIdValue        ScsiIdValue
+}
+
+scsiLuIdIndex  OBJECT-TYPE
+   SYNTAX          ScsiIndexValue
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "This object represents an arbitrary integer used to uniquely
+     identify a particular LU identifier within a particular logical
+     unit within a particular SCSI target device within a particular
+     SCSI instance."
+::= { scsiLuIdEntry 1 }
+
+scsiLuIdCodeSet OBJECT-TYPE
+   SYNTAX           ScsiIdCodeSet
+   MAX-ACCESS       read-only
+   STATUS           current
+   DESCRIPTION
+     "This object specifies the code set in use with this
+     identifier.  The value is represented in the same format as is
+     contained in the identifier's Identification Descriptor within
+     the logical unit's Device Identification Page."
+   REFERENCE
+     "ANSI - SCSI Primary Commands - 2 (SPC-2),
+     ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+     Vital Product Data Parameters [SPC2]"
+::= { scsiLuIdEntry 2 }
+
+scsiLuIdAssociation OBJECT-TYPE
+   SYNTAX           ScsiIdAssociation
+   MAX-ACCESS       read-only
+   STATUS           current
+   DESCRIPTION
+     "This object specifies what the identifier is associated with
+     (e.g., with the addressed physical/logical device or with a
+     particular port).  The value is represented in the same format
+     as is contained in the identifier's Identification Descriptor
+     within the logical unit's Device Identification Page."
+   REFERENCE
+     "ANSI - SCSI Primary Commands - 2 (SPC-2),
+     ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
+     Vital Product Data Parameters [SPC2]"
+::= { scsiLuIdEntry 3 }
+
+scsiLuIdType   OBJECT-TYPE
+   SYNTAX           ScsiIdType
+   MAX-ACCESS       read-only
+   STATUS           current
+   DESCRIPTION
+     "This object specifies the type of the identifier.
+
+     The value is represented in the same format as is contained in
+     the identifier's Identification Descriptor within the logical
+     unit's Device Identification Page."
+   REFERENCE
+     "ANSI - SCSI Primary Commands - 2 (SPC-2),
+     ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
+     Vital Product Data Parameters [SPC2]"
+::= { scsiLuIdEntry 4 }
+
+scsiLuIdValue OBJECT-TYPE
+   SYNTAX         ScsiIdValue
+   MAX-ACCESS     read-only
+   STATUS         current
+   DESCRIPTION
+     "This object represents the actual value of this identifier.
+     The format is defined by the objects scsiLuIdCodeSet,
+     scsiLuIdAssociation, scsiLuIdType.
+     The value is represented in the same format as is contained in
+     the identifier's Identification Descriptor within the logical
+     unit's Device Identification Page."
+   REFERENCE
+     "ANSI - SCSI Primary Commands - 2 (SPC-2),
+     ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
+     Vital Product Data Parameters [SPC2]"
+::= { scsiLuIdEntry 5 }
+
+--******************* The LUN Map Table ****************************
+
+scsiLunMapTable OBJECT-TYPE
+   SYNTAX   SEQUENCE OF ScsiLunMapEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+     "This table provides the ability to present a logical unit
+     using different Logical Unit Numbers for different SCSI
+     initiator devices.
+     This table provides a mapping between a logical unit and a
+     Logical Unit Number, and can be referenced by a
+     ScsiAuthorizedIntrEntry to specify the LUN map for that
+     initiator."
+::= { scsiLogicalUnit 3 }
+
+scsiLunMapEntry OBJECT-TYPE
+   SYNTAX          ScsiLunMapEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+     "An entry containing information about the mapping of a
+
+     particular logical unit to a particular LUN.  The set of
+     entries that all have the same values of scsiInstIndex,
+     scsiDeviceIndex and scsiLunMapIndex constitutes a LUN map
+     within a particular SCSI instance.
+     The StorageType of a row in this table is specified by
+     the instance of scsiInstStorageType that is INDEX-ed by
+     the same value of scsiInstIndex."
+   INDEX { scsiInstIndex, scsiDeviceIndex, scsiLunMapIndex,
+   scsiLunMapLun}
+::= { scsiLunMapTable 1 }
+
+ScsiLunMapEntry ::= SEQUENCE {
+   scsiLunMapIndex      ScsiIndexValue,
+   scsiLunMapLun        ScsiLUN,
+   scsiLunMapLuIndex    ScsiIndexValue,
+   scsiLunMapRowStatus  RowStatus
+}
+
+scsiLunMapIndex   OBJECT-TYPE
+   SYNTAX           ScsiIndexValue
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "This object represents an arbitrary integer used to uniquely
+     identify a particular LunMap within a particular SCSI target
+     device within a particular SCSI instance."
+::= { scsiLunMapEntry 1 }
+
+scsiLunMapLun     OBJECT-TYPE
+   SYNTAX           ScsiLUN
+   MAX-ACCESS       not-accessible
+   STATUS           current
+   DESCRIPTION
+     "This object specifies the Logical Unit Number, to which a
+     logical unit is mapped by this row."
+::= { scsiLunMapEntry 2 }
+
+scsiLunMapLuIndex OBJECT-TYPE
+   SYNTAX         ScsiIndexValue
+   MAX-ACCESS     read-create
+   STATUS         current
+   DESCRIPTION
+     "This object identifies the logical unit for which the value of
+     scsiLuIndex is the same as the value of this object.  The
+     identified logical unit is the one mapped to a LUN by this
+     row."
+::= { scsiLunMapEntry 3 }
+
+scsiLunMapRowStatus  OBJECT-TYPE
+   SYNTAX          RowStatus
+   MAX-ACCESS      read-create
+   STATUS          current
+   DESCRIPTION
+     "This object allows an administrator to create and delete this
+     entry."
+::= { scsiLunMapEntry 4 }
+
+--********************** Notifications ******************************
+-- scsiNotifications OBJECT IDENTIFIER ::= { scsiMIB  2 }
+
+scsiNotificationsPrefix OBJECT IDENTIFIER
+                             ::= { scsiNotifications 0 }
+
+scsiTgtDeviceStatusChanged NOTIFICATION-TYPE
+   OBJECTS { scsiTgtDeviceStatus }
+   STATUS  current
+   DESCRIPTION
+     "This notification will be generated for each occurrence of the
+     abnormal status (e.g., if the SCSI target device's current
+     status is abnormal) providing that the SCSI instance's value of
+     scsiInstScsiNotificationsEnable is enabled.
+     An SNMP agent implementing the SCSI MIB module should not send
+     more than three SCSI identical notifications in any 10-second
+     period."
+::= { scsiNotificationsPrefix 1 }
+
+scsiLuStatusChanged NOTIFICATION-TYPE
+   OBJECTS { scsiLuStatus }
+   STATUS  current
+   DESCRIPTION
+     "This notification will be generated each time that
+     scsiLuStatus changes providing that the SCSI instance's value
+     of scsiInstScsiNotificationsEnable is enabled.
+     An SNMP agent implementing the SCSI MIB module should not send
+     more than three SCSI identical notifications in any 10-second
+     period."
+::= { scsiNotificationsPrefix 2 }
+
+--******************************************************************
+-- The next part defines the conformance groups in use
+-- for SCSI MIB module.
+scsiCompliances OBJECT IDENTIFIER ::= { scsiConformance 1 }
+
+scsiCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+     "Describes the requirements for compliance to this SCSI MIB
+      module.
+     If an implementation can be both a SCSI target device and a SCSI
+     initiator device, all groups are mandatory."
+   MODULE  -- this module
+      MANDATORY-GROUPS {
+         scsiDeviceGroup
+     }
+
+     OBJECT scsiInstAlias
+     MIN-ACCESS read-only
+     DESCRIPTION
+        "Write access is not mandatory."
+
+     OBJECT scsiInstScsiNotificationsEnable
+     MIN-ACCESS read-only
+     DESCRIPTION
+        "Write access is not mandatory."
+
+     OBJECT scsiDeviceAlias
+     MIN-ACCESS read-only
+     DESCRIPTION
+        "Write access is not mandatory."
+
+     OBJECT scsiInstStorageType
+     MIN-ACCESS   read-only
+     DESCRIPTION
+        "Write access is not required."
+
+   -- Conditionally mandatory groups to be included with
+   -- the mandatory groups when the implementation has
+   -- SCSI target device.
+
+     GROUP scsiTargetDeviceGroup
+     DESCRIPTION
+        "This group is mandatory for all SCSI implementations that
+        have SCSI target devices."
+     GROUP scsiLunMapGroup
+     DESCRIPTION
+       "This group is mandatory for systems having the capabilities
+        of mapping local SCSI target devices and logical units
+        according to remote SCSI initiator devices."
+
+     OBJECT scsiAuthIntrDevOrPort
+     MIN-ACCESS   read-only
+     DESCRIPTION
+      "Write access is not required."
+
+     OBJECT scsiAuthIntrName
+     MIN-ACCESS   read-only
+     DESCRIPTION
+      "Write access is not required."
+
+     OBJECT scsiAuthIntrLunMapIndex
+     MIN-ACCESS   read-only
+     DESCRIPTION
+      "Write access is not required."
+
+     OBJECT scsiAuthIntrRowStatus
+     SYNTAX RowStatus { active(1) }
+     MIN-ACCESS   read-only
+     DESCRIPTION
+       "Write access is not required, and only one of the six
+       enumerated values for the RowStatus textual convention need
+       be supported, specifically: active(1)."
+
+     GROUP scsiTgtDevLuNotificationsGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       have SCSI target devices and are able to report status
+       changes."
+
+   -- Conditionally mandatory groups to be included with
+   -- the mandatory groups when the implementation has
+   -- SCSI initiator device.
+
+     GROUP scsiInitiatorDeviceGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       have SCSI initiator devices."
+
+      OBJECT scsiIntrDevTgtAccessMode
+      MIN-ACCESS read-only
+      DESCRIPTION "Write access is not mandatory."
+
+      GROUP scsiDiscoveryGroup
+      DESCRIPTION
+        "This group is mandatory for systems having the capabilities
+        of discovering remote SCSI target devices via local SCSI
+        initiator devices."
+
+      OBJECT scsiLunMapLuIndex
+      MIN-ACCESS read-only
+      DESCRIPTION
+        "Write access is not mandatory."
+
+      OBJECT scsiLunMapRowStatus
+      SYNTAX RowStatus { active(1) }
+      MIN-ACCESS read-only
+      DESCRIPTION
+        "Write access is not required, and only one of the six
+        enumerated values for the RowStatus textual convention need
+        be supported, specifically: active(1)."
+
+      OBJECT scsiDscTgtDevOrPort
+      MIN-ACCESS read-only
+      DESCRIPTION
+        "Write access is not mandatory."
+
+      OBJECT scsiDscTgtName
+      MIN-ACCESS read-only
+      DESCRIPTION "Write access is not mandatory."
+
+      OBJECT scsiDscTgtConfigured
+      SYNTAX TruthValue { false(2) }
+      MIN-ACCESS read-only
+      DESCRIPTION
+        "The value of true(1) is not mandatory neither is the write
+        access."
+
+      OBJECT scsiDscTgtRowStatus
+      SYNTAX RowStatus { active(1) }
+      MIN-ACCESS read-only
+      DESCRIPTION
+        "Write access is not required, and only one of the six
+        enumerated values for the RowStatus textual convention need
+        be supported, specifically: active(1)."
+
+-- Conditionally mandatory groups to be included with the mandatory
+-- groups when the implementation can gather statistics.
+
+     GROUP scsiDeviceStatGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       can gather statistics."
+
+-- Conditionally mandatory groups to be included with the mandatory
+-- groups when the implementation can gather statistics at the SCSI
+-- initiator device side.
+
+     GROUP scsiInitiatorDevStatsGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       can gather statistics at SCSI initiator device side."
+
+     GROUP scsiDiscoveryStatsGroup
+     DESCRIPTION
+       "This group is mandatory for system having the capabilities
+       of gathering statistics regarding remote SCSI target devices
+       via local SCSI initiator devices."
+
+-- Conditionally mandatory groups to be included with the mandatory
+-- groups when the implementation can gather statistics at the SCSI
+-- target side.
+
+     GROUP scsiTargetDevStatsGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       can gather statistics at SCSI target devices."
+
+     GROUP scsiLunMapStatsGroup
+     DESCRIPTION
+       "This group is mandatory for SCSI implementations able to map
+       local SCSI target devices and logical units according to
+       remote SCSI initiator devices."
+
+-- Conditionally mandatory groups to be included with the mandatory
+-- groups when the implementation is running at high speed and can
+-- gather statistics at the SCSI initiator device side.
+
+     GROUP scsiInitiatorDevHSStatsGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       can gather statistics at the SCSI initiator device side and
+       are running at high speed, meaning speed of 4 Gbit/second or
+       higher."
+
+     GROUP scsiDiscoveryHSStatsGroup
+     DESCRIPTION
+       "This group is mandatory for systems having the capabilities
+       of gathering statistics regarding remote SCSI target devices
+       via local SCSI initiator devices and are running at high
+       speed, meaning speed of 4 Gbit/second or higher."
+
+-- Conditionally mandatory groups to be included with the mandatory
+-- groups when the implementation is running at high speed and can
+-- gather statistics at the SCSI target side.
+     GROUP scsiTargetDevHSStatsGroup
+     DESCRIPTION
+       "This group is mandatory for all SCSI implementations that
+       can gather statistics at SCSI target devices in high speed
+       systems, meaning speed of 4 Gbit/second or higher."
+
+     GROUP scsiLunMapHSStatsGroup
+     DESCRIPTION
+       "This group is mandatory for SCSI implementations able to map
+       local SCSI target devices and logical units according to
+       remote SCSI initiator devices in a high speed system, meaning
+       speed of 4 Gbit/second or higher."
+::= { scsiCompliances 1 }
+
+scsiGroups OBJECT IDENTIFIER ::= { scsiConformance 2 }
+
+scsiDeviceGroup OBJECT-GROUP
+   OBJECTS {
+      scsiInstAlias,
+      scsiInstSoftwareIndex,
+      scsiInstVendorVersion,
+      scsiInstScsiNotificationsEnable,
+      scsiInstStorageType,
+      scsiDeviceAlias,
+      scsiDeviceRole,
+      scsiDevicePortNumber,
+      scsiPortRole,
+      scsiPortTransportPtr,
+      scsiTransportType,
+      scsiTransportPointer,
+      scsiTransportDevName
+   }
+   STATUS current
+   DESCRIPTION
+     "A collection of objects providing information about SCSI
+     instances, devices, and ports."
+::= { scsiGroups 1 }
+
+scsiInitiatorDeviceGroup OBJECT-GROUP
+   OBJECTS {
+      scsiIntrDevTgtAccessMode,
+      scsiIntrPortName,
+      scsiIntrPortIdentifier,
+      scsiAttTgtPortDscTgtIdx,
+      scsiAttTgtPortName,
+      scsiAttTgtPortIdentifier
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is relevant for s SCSI initiator device and port."
+::= { scsiGroups 2 }
+
+scsiDiscoveryGroup OBJECT-GROUP
+   OBJECTS {
+      scsiDscTgtDevOrPort,
+      scsiDscTgtName,
+      scsiDscTgtConfigured,
+      scsiDscTgtDiscovered,
+      scsiDscTgtRowStatus,
+      scsiDscTgtLastCreation,
+      scsiDscLunLun,
+      scsiDscLunIdCodeSet,
+      scsiDscLunIdAssociation,
+      scsiDscLunIdType,
+      scsiDscLunIdValue
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is relevant for the discovered SCSI target devices
+     by a SCSI initiator port."
+::= { scsiGroups 3 }
+
+scsiTargetDeviceGroup OBJECT-GROUP
+   OBJECTS {
+      scsiTgtDevNumberOfLUs,
+      scsiTgtDeviceStatus,
+      scsiTgtDevNonAccessibleLUs,
+      scsiTgtPortName,
+      scsiTgtPortIdentifier,
+      scsiAttIntrPortAuthIntrIdx,
+      scsiAttIntrPortName,
+      scsiAttIntrPortIdentifier,
+      scsiLuDefaultLun,
+      scsiLuWwnName,
+      scsiLuVendorId,
+      scsiLuProductId,
+      scsiLuRevisionId,
+      scsiLuPeripheralType,
+      scsiLuStatus,
+      scsiLuState,
+      scsiLuLastCreation,
+      scsiLuIdCodeSet,
+      scsiLuIdAssociation,
+      scsiLuIdType,
+      scsiLuIdValue
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is relevant for a SCSI target device and port."
+::= { scsiGroups 4 }
+
+scsiLunMapGroup OBJECT-GROUP
+   OBJECTS {
+      scsiLunMapLuIndex,
+      scsiLunMapRowStatus,
+      scsiAuthIntrDevOrPort,
+      scsiAuthIntrName,
+      scsiAuthIntrLunMapIndex,
+      scsiAuthIntrLastCreation,
+      scsiAuthIntrRowStatus
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of attributes regarding the mapping
+     between Logical Unit Number, logical unit, and target device."
+::= { scsiGroups 5}
+
+scsiTargetDevStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiTgtDevResets,
+      scsiTgtPortInCommands,
+      scsiTgtPortWrittenMegaBytes,
+      scsiTgtPortReadMegaBytes,
+      scsiLuInCommands,
+      scsiLuReadMegaBytes,
+      scsiLuWrittenMegaBytes,
+      scsiLuInResets,
+      scsiLuOutTaskSetFullStatus
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of statistics for all
+     implementations of the SCSI MIB module that contain SCSI target
+     devices."
+::= { scsiGroups 6}
+
+scsiTargetDevHSStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiTgtPortHSInCommands,
+      scsiLuHSInCommands
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of high speed statistics for all
+     implementations of the SCSI MIB module that contain SCSI target
+     devices."
+::= { scsiGroups 7}
+
+scsiLunMapStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiAuthIntrAttachedTimes,
+      scsiAuthIntrOutCommands,
+      scsiAuthIntrReadMegaBytes,
+      scsiAuthIntrWrittenMegaBytes
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of statistics regarding SCSI
+     initiator devices authorized to attach local logical unit and
+     SCSI target device."
+::= { scsiGroups 8}
+
+scsiLunMapHSStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiAuthIntrHSOutCommands
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of high speed statistics regarding
+     SCSI initiator devices authorized to attach local logical unit
+     and SCSI target device."
+::= { scsiGroups 9}
+
+scsiInitiatorDevStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiIntrDevOutResets,
+      scsiIntrPortOutCommands,
+      scsiIntrPortWrittenMegaBytes,
+      scsiIntrPortReadMegaBytes
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of statistics for all
+     implementations of the SCSI MIB module that contain SCSI
+     initiator devices."
+::= { scsiGroups 10}
+
+scsiInitiatorDevHSStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiIntrPortHSOutCommands
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of high speed statistics for all
+
+     implementations of the SCSI MIB module that contain SCSI
+     initiator devices."
+::= { scsiGroups 11}
+
+scsiDiscoveryStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiDscTgtInCommands,
+      scsiDscTgtReadMegaBytes,
+      scsiDscTgtWrittenMegaBytes
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of statistics for all
+     implementations of the SCSI MIB module that contain discovered
+     SCSI initiator devices."
+::= { scsiGroups 12}
+
+scsiDiscoveryHSStatsGroup OBJECT-GROUP
+   OBJECTS {
+      scsiDscTgtHSInCommands
+   }
+   STATUS current
+   DESCRIPTION
+     "This group is a collection of high speed statistics for all
+     implementations of the SCSI MIB module that contain discovered
+     SCSI initiator devices."
+::= { scsiGroups 13}
+
+scsiDeviceStatGroup OBJECT-GROUP
+   OBJECTS {
+      scsiPortBusyStatuses
+   }
+   STATUS current
+   DESCRIPTION
+     "A collection of statistics regarding SCSI devices and
+     ports."
+::= { scsiGroups 14 }
+
+scsiTgtDevLuNotificationsGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+      scsiTgtDeviceStatusChanged,
+      scsiLuStatusChanged
+   }
+   STATUS current
+   DESCRIPTION
+     "A collection of notifications regarding status change of SCSI
+     target devices and logical units."
+::= { scsiGroups 15 }
+
+END
diff --git a/snmp_builder/mibs/SCTP-MIB.mib b/snmp_builder/mibs/SCTP-MIB.mib
new file mode 100644
index 0000000..9d809d2
--- /dev/null
+++ b/snmp_builder/mibs/SCTP-MIB.mib
@@ -0,0 +1,1342 @@
+SCTP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+  MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32,
+  Counter32, Counter64, mib-2
+       FROM SNMPv2-SMI                        -- [RFC2578]
+  TimeStamp, TruthValue
+       FROM SNMPv2-TC                         -- [RFC2579]
+  MODULE-COMPLIANCE, OBJECT-GROUP
+       FROM SNMPv2-CONF                       -- [RFC2580]
+  InetAddressType, InetAddress, InetPortNumber
+       FROM INET-ADDRESS-MIB;                 -- [RFC3291]
+
+sctpMIB MODULE-IDENTITY
+  LAST-UPDATED "200409020000Z"       -- 2nd September 2004
+  ORGANIZATION "IETF SIGTRAN Working Group"
+  CONTACT-INFO
+       "
+        WG EMail: sigtran@ietf.org
+
+        Web Page:
+              http://www.ietf.org/html.charters/sigtran-charter.html
+
+        Chair:     Lyndon Ong
+                   Ciena Corporation
+                   0480 Ridgeview Drive
+                   Cupertino, CA  95014
+                   USA
+                   Tel:
+                   Email: lyong@ciena.com
+
+        Editors:   Maria-Carmen Belinchon
+                   R&D Department
+                   Ericsson Espana S. A.
+                   Via de los Poblados, 13
+                   28033 Madrid
+                   Spain
+                   Tel:   +34 91 339 3535
+                   Email: Maria.C.Belinchon@ericsson.com
+
+                   Jose-Javier Pastor-Balbas
+                   R&D Department
+                   Ericsson Espana S. A.
+                   Via de los Poblados, 13
+                   28033 Madrid
+                   Spain
+                   Tel:   +34 91 339 1397
+            Email: J.Javier.Pastor@ericsson.com
+       "
+  DESCRIPTION
+       "The MIB module for managing SCTP implementations.
+
+       Copyright (C) The Internet Society (2004).  This version of
+       this MIB module is part of RFC 3873; see the RFC itself for
+       full legal notices. "
+
+  REVISION "200409020000Z"       -- 2nd September 2004
+  DESCRIPTION " Initial version, published as RFC 3873"
+  ::= {  mib-2 104 }
+
+-- the SCTP base variables group
+
+sctpObjects OBJECT IDENTIFIER ::= { sctpMIB 1 }
+
+sctpStats   OBJECT IDENTIFIER ::= { sctpObjects 1 }
+sctpParams  OBJECT IDENTIFIER ::= { sctpObjects 2 }
+
+-- STATISTICS
+-- **********
+
+-- STATE-RELATED STATISTICS
+
+sctpCurrEstab OBJECT-TYPE
+  SYNTAX         Gauge32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of associations for which the current state is
+       either ESTABLISHED, SHUTDOWN-RECEIVED or SHUTDOWN-PENDING."
+  REFERENCE
+       "Section 4 in RFC2960 covers the SCTP   Association state
+       diagram."
+  ::= { sctpStats 1 }
+
+sctpActiveEstabs OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of times that associations have made a direct
+       transition to the ESTABLISHED state from the COOKIE-ECHOED
+       state: COOKIE-ECHOED -> ESTABLISHED. The upper layer initiated
+       the association attempt."
+  REFERENCE
+       "Section 4 in RFC2960 covers the SCTP   Association state
+       diagram."
+  ::= { sctpStats  2 }
+
+sctpPassiveEstabs OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of times that associations have made a direct
+       transition to the ESTABLISHED state from the CLOSED state:
+       CLOSED -> ESTABLISHED. The remote endpoint initiated the
+       association attempt."
+  REFERENCE
+       "Section 4 in RFC2960 covers the SCTP   Association state
+       diagram."
+  ::= { sctpStats  3 }
+
+sctpAborteds OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of times that associations have made a direct
+       transition to the CLOSED state from any state using the
+       primitive 'ABORT': AnyState --Abort--> CLOSED. Ungraceful
+       termination of the association."
+  REFERENCE
+       "Section 4 in RFC2960 covers the SCTP   Association state
+       diagram."
+  ::= { sctpStats  4 }
+
+sctpShutdowns OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of times that associations have made a direct
+       transition to the CLOSED state from either the SHUTDOWN-SENT
+       state or the SHUTDOWN-ACK-SENT state. Graceful termination of
+       the association."
+  REFERENCE
+       "Section 4 in RFC2960 covers the SCTP   Association state
+       diagram."
+  ::= { sctpStats  5 }
+
+-- OTHER LAYER STATISTICS
+
+sctpOutOfBlues OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of out of the blue packets received by the host.
+       An out of the blue packet is an SCTP packet correctly formed,
+       including the proper checksum, but for which the receiver was
+       unable to identify an appropriate association."
+  REFERENCE
+       "Section 8.4 in RFC2960 deals with the Out-Of-The-Blue
+        (OOTB) packet definition and procedures."
+  ::= { sctpStats  6 }
+
+sctpChecksumErrors OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP packets received with an invalid
+       checksum."
+  REFERENCE
+       "The checksum is located at the end of the SCTP packet as per
+       Section 3.1 in RFC2960. RFC3309 updates SCTP to use a 32 bit
+       CRC checksum."
+::= { sctpStats  7 }
+
+sctpOutCtrlChunks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP control chunks sent (retransmissions are
+       not included). Control chunks are those chunks different from
+       DATA."
+  REFERENCE
+       "Sections 1.3.5 and 1.4 in RFC2960 refer to control chunk as
+       those chunks different from those that contain user
+       information, i.e., DATA chunks."
+  ::= { sctpStats  8 }
+
+sctpOutOrderChunks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP ordered data chunks sent (retransmissions
+       are not included)."
+  REFERENCE
+       "Section 3.3.1 in RFC2960 defines the ordered data chunk."
+  ::= { sctpStats  9 }
+
+sctpOutUnorderChunks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP unordered chunks (data chunks in which the
+       U bit is set to 1) sent (retransmissions are not included)."
+  REFERENCE
+       "Section 3.3.1 in RFC2960 defines the unordered data chunk."
+  ::= { sctpStats  10 }
+
+sctpInCtrlChunks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP control chunks received (no duplicate
+       chunks included)."
+  REFERENCE
+       "Sections 1.3.5 and 1.4 in RFC2960 refer to control chunk as
+       those chunks different from those that contain user
+       information, i.e., DATA chunks."
+  ::= { sctpStats  11 }
+
+sctpInOrderChunks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP ordered data chunks received (no duplicate
+       chunks included)."
+  REFERENCE
+       "Section 3.3.1 in RFC2960 defines the ordered data chunk."
+  ::= { sctpStats  12 }
+
+sctpInUnorderChunks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP unordered chunks (data chunks in which the
+       U bit is set to 1) received (no duplicate chunks included)."
+  REFERENCE
+       "Section 3.3.1 in RFC2960 defines the unordered data chunk."
+  ::= { sctpStats  13 }
+
+sctpFragUsrMsgs OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of user messages that have to be fragmented
+       because of the MTU."
+  ::= { sctpStats  14 }
+
+sctpReasmUsrMsgs OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of user messages reassembled, after conversion
+       into DATA chunks."
+  REFERENCE
+       "Section 6.9 in RFC2960 includes a description of the
+       reassembly process."
+  ::= { sctpStats  15 }
+
+sctpOutSCTPPacks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP packets sent. Retransmitted DATA chunks
+       are included."
+  ::= { sctpStats  16 }
+
+sctpInSCTPPacks OBJECT-TYPE
+  SYNTAX         Counter64
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The number of SCTP packets received. Duplicates are
+       included."
+  ::= { sctpStats  17 }
+
+sctpDiscontinuityTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime on the most recent occasion at which
+       any one or more of this general statistics counters suffered a
+       discontinuity.  The relevant counters are the specific
+       instances associated with this interface of any Counter32 or
+       Counter64 object contained in the SCTP layer statistics
+       (defined below sctpStats branch).  If no such discontinuities
+       have occurred since the last re-initialization of the local
+       management subsystem, then this object contains a zero value."
+  REFERENCE
+       "The inclusion of this object is recommended by RFC2578."
+  ::= { sctpStats 18 }
+
+-- PROTOCOL GENERAL VARIABLES
+-- **************************
+
+sctpRtoAlgorithm OBJECT-TYPE
+  SYNTAX         INTEGER {
+                      other(1),      -- Other new one. Future use
+                      vanj(2)        -- Van Jacobson's algorithm
+                 }
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The algorithm used to determine the timeout value (T3-rtx)
+       used for re-transmitting unacknowledged chunks."
+  REFERENCE
+       "Section 6.3.1 and 6.3.2 in RFC2960 cover the RTO calculation
+       and retransmission timer rules."
+  DEFVAL {vanj} -- vanj(2)
+  ::= { sctpParams 1 }
+
+sctpRtoMin OBJECT-TYPE
+  SYNTAX         Unsigned32
+  UNITS          "milliseconds"
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The minimum value permitted by a SCTP implementation for the
+       retransmission timeout value, measured in milliseconds.  More
+       refined semantics for objects of this type depend upon the
+       algorithm used to determine the retransmission timeout value.
+
+       A retransmission time value of zero means immediate
+       retransmission.
+
+       The value of this object has to be lower than or equal to
+       stcpRtoMax's value."
+  DEFVAL {1000} -- milliseconds
+  ::= { sctpParams 2 }
+
+sctpRtoMax OBJECT-TYPE
+  SYNTAX         Unsigned32
+  UNITS          "milliseconds"
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The maximum value permitted by a SCTP implementation for the
+       retransmission timeout value, measured in milliseconds.  More
+       refined semantics for objects of this type depend upon the
+       algorithm used to determine the retransmission timeout value.
+
+       A retransmission time value of zero means immediate re-
+       transmission.
+
+       The value of this object has to be greater than or equal to
+       stcpRtoMin's value."
+  DEFVAL {60000} -- milliseconds
+    ::= { sctpParams 3 }
+
+sctpRtoInitial OBJECT-TYPE
+  SYNTAX         Unsigned32
+  UNITS          "milliseconds"
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The initial value for the retransmission timer.
+
+       A retransmission time value of zero means immediate re-
+       transmission."
+  DEFVAL {3000} -- milliseconds
+  ::= { sctpParams 4 }
+
+sctpMaxAssocs OBJECT-TYPE
+  SYNTAX         Integer32 (-1 | 0..2147483647)
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The limit on the total number of associations the entity can
+       support. In entities where the maximum number of associations
+       is dynamic, this object should contain the value -1."
+  ::= { sctpParams 5 }
+
+sctpValCookieLife OBJECT-TYPE
+  SYNTAX         Unsigned32
+  UNITS          "milliseconds"
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "Valid cookie life in the 4-way start-up handshake procedure."
+  REFERENCE
+       "Section 5.1.3 in RFC2960 explains the cookie generation
+       process. Recommended value is per section 14 in RFC2960."
+  DEFVAL {60000} -- milliseconds
+  ::= { sctpParams 6 }
+
+sctpMaxInitRetr OBJECT-TYPE
+  SYNTAX         Unsigned32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The maximum number of retransmissions at the start-up phase
+       (INIT and COOKIE ECHO chunks). "
+  REFERENCE
+       "Section 5.1.4, 5.1.6 in RFC2960 refers to Max.Init.Retransmit
+       parameter. Recommended value is per section 14 in RFC2960."
+  DEFVAL {8} -- number of attempts
+  ::= { sctpParams 7 }
+
+-- TABLES
+-- ******
+
+-- the SCTP Association TABLE
+
+-- The SCTP association table contains information about each
+-- association in which the local endpoint is involved.
+
+sctpAssocTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpAssocEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "A table containing SCTP association-specific information."
+  ::= { sctpObjects 3 }
+
+sctpAssocEntry OBJECT-TYPE
+  SYNTAX         SctpAssocEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "General common variables and statistics for the whole
+       association."
+  INDEX          { sctpAssocId }
+  ::= { sctpAssocTable 1 }
+
+SctpAssocEntry ::= SEQUENCE {
+  sctpAssocId                        Unsigned32,
+  sctpAssocRemHostName               OCTET STRING,
+  sctpAssocLocalPort                 InetPortNumber,
+  sctpAssocRemPort                   InetPortNumber,
+  sctpAssocRemPrimAddrType           InetAddressType,
+  sctpAssocRemPrimAddr               InetAddress,
+  sctpAssocHeartBeatInterval         Unsigned32,
+  sctpAssocState                     INTEGER,
+  sctpAssocInStreams                 Unsigned32,
+  sctpAssocOutStreams                Unsigned32,
+  sctpAssocMaxRetr                   Unsigned32,
+  sctpAssocPrimProcess               Unsigned32,
+  sctpAssocT1expireds                Counter32,     -- Statistic
+  sctpAssocT2expireds                Counter32,     -- Statistic
+  sctpAssocRtxChunks                 Counter32,     -- Statistic
+  sctpAssocStartTime                 TimeStamp,
+  sctpAssocDiscontinuityTime         TimeStamp
+  }
+
+sctpAssocId OBJECT-TYPE
+  SYNTAX         Unsigned32 (1..4294967295)
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Association Identification. Value identifying the
+       association. "
+  ::= { sctpAssocEntry 1 }
+
+sctpAssocRemHostName OBJECT-TYPE
+  SYNTAX         OCTET STRING (SIZE(0..255))
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The peer's DNS name. This object needs to have the same
+       format as the encoding in the DNS protocol.  This implies that
+       the domain name can be up to 255 octets long, each octet being
+       0<=x<=255 as value with US-ASCII A-Z having a case insensitive
+       matching.
+
+       If no DNS domain name was received from the peer at init time
+       (embedded in the INIT or INIT-ACK chunk), this object is
+       meaningless. In such cases the object MUST contain a zero-
+       length string value. Otherwise, it contains the remote host
+       name received at init time."
+  ::= { sctpAssocEntry 2 }
+
+sctpAssocLocalPort OBJECT-TYPE
+  SYNTAX         InetPortNumber (1..65535)
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The local SCTP port number used for this association."
+  ::= { sctpAssocEntry 3 }
+
+sctpAssocRemPort OBJECT-TYPE
+  SYNTAX         InetPortNumber (1..65535)
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The remote SCTP port number used for this association."
+  ::= { sctpAssocEntry 4 }
+
+sctpAssocRemPrimAddrType OBJECT-TYPE
+  SYNTAX         InetAddressType
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The internet type of primary remote IP address. "
+  ::= { sctpAssocEntry 5 }
+
+sctpAssocRemPrimAddr OBJECT-TYPE
+  SYNTAX         InetAddress
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The primary remote IP address. The type of this address is
+       determined by the value of sctpAssocRemPrimAddrType.
+
+       The client side will know this value after INIT_ACK message
+       reception, the server side will know this value when sending
+       INIT_ACK message. However, values will be filled in at
+       established(4) state."
+  ::= { sctpAssocEntry 6 }
+
+sctpAssocHeartBeatInterval OBJECT-TYPE
+  SYNTAX         Unsigned32
+  UNITS          "milliseconds"
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The current heartbeat interval..
+
+       Zero value means no HeartBeat, even when the concerned
+       sctpAssocRemAddrHBFlag object is true."
+  DEFVAL {30000} -- milliseconds
+  ::= { sctpAssocEntry 7 }
+
+sctpAssocState OBJECT-TYPE
+  SYNTAX         INTEGER {
+                      closed(1),
+                      cookieWait(2),
+                      cookieEchoed(3),
+                      established(4),
+                      shutdownPending(5),
+                      shutdownSent(6),
+                      shutdownReceived(7),
+                      shutdownAckSent(8),
+                      deleteTCB(9)
+                      }
+  MAX-ACCESS     read-write
+  STATUS         current
+  DESCRIPTION
+       "The state of this SCTP association.
+
+       As in TCP, deleteTCB(9) is the only value that may be set by a
+       management station. If any other value is received, then the
+       agent must return a wrongValue error.
+
+       If a management station sets this object to the value
+       deleteTCB(9), then this has the effect of deleting the TCB (as
+       defined in SCTP) of the corresponding association on the
+       managed node, resulting in immediate termination of the
+       association.
+
+       As an implementation-specific option, an ABORT chunk may be
+       sent from the managed node to the other SCTP endpoint as a
+       result of setting the deleteTCB(9) value. The ABORT chunk
+       implies an ungraceful association shutdown."
+  REFERENCE
+       "Section 4 in RFC2960 covers the SCTP Association state
+       diagram."
+  ::= { sctpAssocEntry 8 }
+
+sctpAssocInStreams OBJECT-TYPE
+  SYNTAX         Unsigned32 (1..65535)
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "Inbound Streams according to the negotiation at association
+       start up."
+  REFERENCE
+       "Section 1.3 in RFC2960 includes a definition of stream.
+       Section 5.1.1 in RFC2960 covers the streams negotiation
+       process."
+  ::= { sctpAssocEntry 9 }
+
+sctpAssocOutStreams OBJECT-TYPE
+  SYNTAX         Unsigned32 (1..65535)
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "Outbound Streams according to the negotiation at association
+       start up. "
+  REFERENCE
+       "Section 1.3 in RFC2960 includes a definition of stream.
+       Section 5.1.1 in RFC2960 covers the streams negotiation
+       process."
+  ::= { sctpAssocEntry 10 }
+
+sctpAssocMaxRetr OBJECT-TYPE
+  SYNTAX         Unsigned32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The maximum number of data retransmissions in the association
+       context. This value is specific for each association and the
+       upper layer can change it by calling the appropriate
+       primitives. This value has to be smaller than the addition of
+       all the maximum number for all the paths
+       (sctpAssocRemAddrMaxPathRtx).
+
+       A value of zero value means no retransmissions."
+  DEFVAL {10} -- number of attempts
+  ::= { sctpAssocEntry 11 }
+
+sctpAssocPrimProcess OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS read-only
+      STATUS      current
+      DESCRIPTION
+       "This object identifies the system level process which holds
+       primary responsibility for the SCTP association.
+       Wherever possible, this should be the system's native unique
+       identification number. The special value 0 can be used to
+       indicate that no primary process is known.
+
+       Note that the value of this object can be used as a pointer
+       into the swRunTable of the HOST-RESOURCES-MIB(if the value is
+       smaller than 2147483647) or into the sysApplElmtRunTable of
+       the SYSAPPL-MIB."
+  ::= { sctpAssocEntry 12 }
+
+-- Association Statistics
+
+sctpAssocT1expireds OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The T1 timer determines how long to wait for an
+       acknowledgement after sending an INIT or COOKIE-ECHO chunk.
+       This object reflects the number of times the T1 timer expires
+       without having received the acknowledgement.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system, and at other times as
+       indicated by the value of sctpAssocDiscontinuityTime."
+  REFERENCE
+       "Section 5 in RFC2960."
+  ::= { sctpAssocEntry 13 }
+
+sctpAssocT2expireds OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The T2 timer determines how long to wait for an
+       acknowledgement after sending a SHUTDOWN or SHUTDOWN-ACK
+       chunk. This object reflects the number of times that T2- timer
+       expired.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system, and at other times as
+       indicated by the value of sctpAssocDiscontinuityTime."
+REFERENCE
+       "Section 9.2 in RFC2960."
+  ::= { sctpAssocEntry 14 }
+
+sctpAssocRtxChunks OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "When T3-rtx expires, the DATA chunks that triggered the T3
+       timer will be re-sent according with the retransmissions
+       rules. Every DATA chunk that was included in the SCTP packet
+       that triggered the T3-rtx timer must be added to the value of
+       this counter.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system, and at other times as
+       indicated by the value of sctpAssocDiscontinuityTime."
+  REFERENCE
+       "Section 6 in RFC2960 covers the retransmission process and
+       rules."
+  ::= { sctpAssocEntry 15 }
+
+sctpAssocStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime at the time that the association
+       represented by this row enters the ESTABLISHED state, i.e.,
+       the sctpAssocState object is set to established(4). The
+       value of this object will be zero:
+       - before the association enters the established(4)
+         state, or
+
+       - if the established(4) state was entered prior to
+         the last re-initialization of the local network management
+         subsystem."
+  ::= { sctpAssocEntry 16 }
+
+sctpAssocDiscontinuityTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime on the most recent occasion at which
+       any one or more of this SCTP association counters suffered a
+       discontinuity.  The relevant counters are the specific
+       instances associated with this interface of any Counter32 or
+       Counter64 object contained in the sctpAssocTable or
+       sctpLocalAddrTable or sctpRemAddrTable.  If no such
+       discontinuities have occurred since the last re-initialization
+       of the local management subsystem, then this object contains a
+       zero value. "
+  REFERENCE
+       "The inclusion of this object is recommended by RFC2578."
+  ::= { sctpAssocEntry 17 }
+
+-- Expanded tables: Including Multi-home feature
+
+-- Local Address TABLE
+-- *******************
+
+sctpAssocLocalAddrTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpAssocLocalAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Expanded table of sctpAssocTable based on the AssocId index.
+       This table shows data related to each local IP address which
+       is used by this association."
+  ::= { sctpObjects  4 }
+
+sctpAssocLocalAddrEntry OBJECT-TYPE
+  SYNTAX         SctpAssocLocalAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Local information about the available addresses. There will
+       be an entry for every local IP address defined for this
+
+       association.
+       Implementors need to be aware that if the size of
+       sctpAssocLocalAddr exceeds 114 octets then OIDs of column
+       instances in this table will have more than 128 sub-
+       identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
+       SNMPv3."
+  INDEX     {    sctpAssocId,   -- shared index
+                 sctpAssocLocalAddrType,
+                 sctpAssocLocalAddr }
+  ::= { sctpAssocLocalAddrTable 1 }
+
+SctpAssocLocalAddrEntry ::= SEQUENCE {
+  sctpAssocLocalAddrType        InetAddressType,
+  sctpAssocLocalAddr            InetAddress,
+  sctpAssocLocalAddrStartTime   TimeStamp
+  }
+
+sctpAssocLocalAddrType OBJECT-TYPE
+  SYNTAX         InetAddressType
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Internet type of local IP address used for this association."
+  ::= { sctpAssocLocalAddrEntry 1 }
+
+sctpAssocLocalAddr OBJECT-TYPE
+  SYNTAX         InetAddress
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "The value of a local IP address available for this
+       association. The type of this address is determined by the
+       value of sctpAssocLocalAddrType."
+  ::= { sctpAssocLocalAddrEntry 2 }
+
+sctpAssocLocalAddrStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime at the time that this row was
+       created."
+  ::= { sctpAssocLocalAddrEntry 3 }
+
+-- Remote Addresses TABLE
+-- **********************
+
+sctpAssocRemAddrTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpAssocRemAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Expanded table of sctpAssocTable based on the AssocId index.
+       This table shows data related to each remote peer IP address
+       which is used by this association."
+  ::= { sctpObjects  5 }
+
+sctpAssocRemAddrEntry OBJECT-TYPE
+  SYNTAX         SctpAssocRemAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Information about the most important variables for every
+       remote IP address. There will be an entry for every remote IP
+       address defined for this association.
+
+       Implementors need to be aware that if the size of
+       sctpAssocRemAddr exceeds 114 octets then OIDs of column
+       instances in this table will have more than 128 sub-
+       identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
+       SNMPv3."
+  INDEX   { sctpAssocId,   -- shared index
+            sctpAssocRemAddrType,
+            sctpAssocRemAddr }
+  ::= { sctpAssocRemAddrTable 1 }
+
+SctpAssocRemAddrEntry ::= SEQUENCE {
+  sctpAssocRemAddrType               InetAddressType,
+  sctpAssocRemAddr                   InetAddress,
+  sctpAssocRemAddrActive             TruthValue,
+  sctpAssocRemAddrHBActive           TruthValue,
+  sctpAssocRemAddrRTO                Unsigned32,
+  sctpAssocRemAddrMaxPathRtx         Unsigned32,
+  sctpAssocRemAddrRtx                Counter32,     -- Statistic
+  sctpAssocRemAddrStartTime          TimeStamp
+  }
+
+sctpAssocRemAddrType OBJECT-TYPE
+  SYNTAX         InetAddressType
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "Internet type of a remote IP address available for this
+       association."
+  ::= { sctpAssocRemAddrEntry 1 }
+
+sctpAssocRemAddr OBJECT-TYPE
+  SYNTAX         InetAddress
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "The value of a remote IP address available for this
+       association. The type of this address is determined by the
+       value of sctpAssocLocalAddrType."
+  ::= { sctpAssocRemAddrEntry 2 }
+
+sctpAssocRemAddrActive OBJECT-TYPE
+  SYNTAX         TruthValue
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "This object gives information about the reachability of this
+       specific remote IP address.
+
+       When the object is set to 'true' (1), the remote IP address is
+       understood as Active. Active means that the threshold of no
+       answers received from this IP address has not been reached.
+
+       When the object is set to 'false' (2), the remote IP address
+       is understood as Inactive. Inactive means that either no
+       heartbeat or any other message was received from this address,
+       reaching the threshold defined by the protocol."
+  REFERENCE
+       "The remote transport states are defined as Active and
+       Inactive in the SCTP, RFC2960."
+  ::= { sctpAssocRemAddrEntry 3 }
+
+sctpAssocRemAddrHBActive OBJECT-TYPE
+  SYNTAX         TruthValue
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "This object indicates whether the optional Heartbeat check
+       associated to one destination transport address is activated
+       or not (value equal to true or false, respectively). "
+  ::= { sctpAssocRemAddrEntry 4 }
+
+sctpAssocRemAddrRTO OBJECT-TYPE -- T3-rtx- Timer
+  SYNTAX         Unsigned32
+  UNITS          "milliseconds"
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The current Retransmission Timeout. T3-rtx timer as defined
+       in the protocol SCTP."
+  REFERENCE
+       "Section 6.3 in RFC2960 deals with the Retransmission Timer
+       Management."
+  ::= { sctpAssocRemAddrEntry 5 }
+
+sctpAssocRemAddrMaxPathRtx OBJECT-TYPE
+  SYNTAX         Unsigned32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "Maximum number of DATA chunks retransmissions allowed to a
+       remote IP address before it is considered inactive, as defined
+       in RFC2960."
+  REFERENCE
+       "Section 8.2, 8.3 and 14 in RFC2960."
+  DEFVAL {5} -- number of attempts
+  ::= { sctpAssocRemAddrEntry 6 }
+
+-- Remote Address Statistic
+
+sctpAssocRemAddrRtx OBJECT-TYPE
+  SYNTAX         Counter32
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "Number of DATA chunks retransmissions to this specific IP
+       address. When T3-rtx expires, the DATA chunk that triggered
+       the T3 timer will be re-sent according to the retransmissions
+       rules. Every DATA chunk that is included in a SCTP packet and
+       was transmitted to this specific IP address before, will be
+       included in this counter.
+
+       Discontinuities in the value of this counter can occur at re-
+       initialization of the management system, and at other times as
+       indicated by the value of sctpAssocDiscontinuityTime."
+  ::= { sctpAssocRemAddrEntry 7 }
+
+sctpAssocRemAddrStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime at the time that this row was
+       created."
+  ::= { sctpAssocRemAddrEntry 8 }
+
+-- ASSOCIATION INVERSE TABLE
+-- *************************
+
+-- BY LOCAL PORT
+
+sctpLookupLocalPortTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpLookupLocalPortEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "With the use of this table, a list of associations which are
+
+       using the specified local port can be retrieved."
+  ::= { sctpObjects  6 }
+
+sctpLookupLocalPortEntry OBJECT-TYPE
+  SYNTAX         SctpLookupLocalPortEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "This table is indexed by local port and association ID.
+       Specifying a local port, we would get a list of the
+       associations whose local port is the one specified."
+  INDEX         { sctpAssocLocalPort,
+                 sctpAssocId }
+  ::= { sctpLookupLocalPortTable 1 }
+
+SctpLookupLocalPortEntry::= SEQUENCE {
+  sctpLookupLocalPortStartTime            TimeStamp
+  }
+
+sctpLookupLocalPortStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime at the time that this row was created.
+
+       As the table will be created after the sctpAssocTable
+       creation, this value could be equal to the sctpAssocStartTime
+       object from the main table."
+  ::= { sctpLookupLocalPortEntry 1 }
+
+-- BY REMOTE PORT
+
+sctpLookupRemPortTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpLookupRemPortEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "With the use of this table, a list of associations which are
+       using the specified remote port can be got"
+  ::= { sctpObjects  7 }
+
+sctpLookupRemPortEntry OBJECT-TYPE
+  SYNTAX         SctpLookupRemPortEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "This table is indexed by remote port and association ID.
+       Specifying a remote port we would get a list of the
+       associations whose local port is the one specified "
+  INDEX         { sctpAssocRemPort,
+                 sctpAssocId }
+  ::= { sctpLookupRemPortTable 1 }
+
+SctpLookupRemPortEntry::= SEQUENCE {
+  sctpLookupRemPortStartTime              TimeStamp
+  }
+
+sctpLookupRemPortStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime at the time that this row was created.
+
+       As the table will be created after the sctpAssocTable
+       creation, this value could be equal to the sctpAssocStartTime
+       object from the main table."
+  ::= { sctpLookupRemPortEntry 1 }
+
+-- BY REMOTE HOST NAME
+
+sctpLookupRemHostNameTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpLookupRemHostNameEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "With the use of this table, a list of associations with that
+       particular host can be retrieved."
+  ::= { sctpObjects  8 }
+
+sctpLookupRemHostNameEntry OBJECT-TYPE
+  SYNTAX         SctpLookupRemHostNameEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "This table is indexed by remote host name and association ID.
+       Specifying a host name we would get a list of the associations
+       specifying that host name as the remote one.
+
+       Implementors need to be aware that if the size of
+       sctpAssocRemHostName exceeds 115 octets then OIDs of column
+       instances in this table will have more than 128 sub-
+       identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
+       SNMPv3."
+  INDEX         { sctpAssocRemHostName,
+                 sctpAssocId }
+  ::= { sctpLookupRemHostNameTable 1 }
+
+SctpLookupRemHostNameEntry::= SEQUENCE {
+  sctpLookupRemHostNameStartTime               TimeStamp
+  }
+
+sctpLookupRemHostNameStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of sysUpTime at the time that this row was created.
+
+       As the table will be created after the sctpAssocTable
+       creation, this value could be equal to the sctpAssocStartTime
+       object from the main table."
+  ::= { sctpLookupRemHostNameEntry 1 }
+
+-- BY REMOTE PRIMARY IP ADDRESS
+
+sctpLookupRemPrimIPAddrTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpLookupRemPrimIPAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "With the use of this table, a list of associations that have
+       the specified IP address as primary within the remote set of
+       active addresses can be retrieved."
+  ::= { sctpObjects  9 }
+
+sctpLookupRemPrimIPAddrEntry OBJECT-TYPE
+  SYNTAX         SctpLookupRemPrimIPAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "This table is indexed by primary address and association ID.
+       Specifying a primary address, we would get a list of the
+       associations that have the specified remote IP address marked
+       as primary.
+       Implementors need to be aware that if the size of
+       sctpAssocRemPrimAddr exceeds 114 octets then OIDs of column
+       instances in this table will have more than 128 sub-
+       identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
+       SNMPv3."
+  INDEX         { sctpAssocRemPrimAddrType,
+                 sctpAssocRemPrimAddr,
+                 sctpAssocId }
+  ::= { sctpLookupRemPrimIPAddrTable 1 }
+
+SctpLookupRemPrimIPAddrEntry::= SEQUENCE {
+  sctpLookupRemPrimIPAddrStartTime             TimeStamp
+  }
+
+sctpLookupRemPrimIPAddrStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of SysUpTime at the time that this row was created.
+
+       As the table will be created after the sctpAssocTable
+       creation, this value could be equal to the sctpAssocStartTime
+       object from the main table."
+  ::= { sctpLookupRemPrimIPAddrEntry 1 }
+
+-- BY REMOTE IP ADDRESS
+
+sctpLookupRemIPAddrTable OBJECT-TYPE
+  SYNTAX         SEQUENCE OF SctpLookupRemIPAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "With the use of this table, a list of associations that have
+       the specified IP address as one of the remote ones can be
+       retrieved. "
+  ::= { sctpObjects  10 }
+
+sctpLookupRemIPAddrEntry OBJECT-TYPE
+  SYNTAX         SctpLookupRemIPAddrEntry
+  MAX-ACCESS     not-accessible
+  STATUS         current
+  DESCRIPTION
+       "This table is indexed by a remote IP address and association
+       ID. Specifying an IP address we would get a list of the
+       associations that have the specified IP address included
+       within the set of remote IP addresses."
+  INDEX         { sctpAssocRemAddrType,
+                 sctpAssocRemAddr,
+                 sctpAssocId }
+  ::= { sctpLookupRemIPAddrTable 1 }
+
+SctpLookupRemIPAddrEntry::= SEQUENCE {
+
+  sctpLookupRemIPAddrStartTime            TimeStamp
+  }
+
+sctpLookupRemIPAddrStartTime OBJECT-TYPE
+  SYNTAX         TimeStamp
+  MAX-ACCESS     read-only
+  STATUS         current
+  DESCRIPTION
+       "The value of SysUpTime at the time that this row was created.
+
+       As the table will be created after the sctpAssocTable
+       creation, this value could be equal to the sctpAssocStartTime
+       object from the main table."
+  ::= { sctpLookupRemIPAddrEntry 1 }
+
+-- 4.1 Conformance Information
+
+sctpMibConformance    OBJECT IDENTIFIER ::= { sctpMIB 2 }
+sctpMibCompliances    OBJECT IDENTIFIER ::= { sctpMibConformance 1 }
+sctpMibGroups         OBJECT IDENTIFIER ::= { sctpMibConformance 2 }
+
+-- 4.1.1 Units of conformance
+
+--
+-- MODULE GROUPS
+--
+
+sctpLayerParamsGroup OBJECT-GROUP
+  OBJECTS   { sctpRtoAlgorithm,
+              sctpRtoMin,
+              sctpRtoMax,
+              sctpRtoInitial,
+              sctpMaxAssocs,
+              sctpValCookieLife,
+              sctpMaxInitRetr
+            }
+  STATUS    current
+  DESCRIPTION
+       "Common parameters for the SCTP layer, i.e., for all the
+       associations. They can usually be referred to as configuration
+       parameters."
+  ::= { sctpMibGroups 1 }
+
+sctpStatsGroup OBJECT-GROUP
+  OBJECTS   { sctpCurrEstab,
+              sctpActiveEstabs,
+              sctpPassiveEstabs,
+              sctpAborteds,
+              sctpShutdowns,
+              sctpOutOfBlues,
+              sctpChecksumErrors,
+              sctpOutCtrlChunks,
+              sctpOutOrderChunks,
+              sctpOutUnorderChunks,
+              sctpInCtrlChunks,
+              sctpInOrderChunks,
+              sctpInUnorderChunks,
+              sctpFragUsrMsgs,
+              sctpReasmUsrMsgs,
+              sctpOutSCTPPacks,
+              sctpInSCTPPacks,
+              sctpDiscontinuityTime,
+              sctpAssocT1expireds,
+              sctpAssocT2expireds,
+              sctpAssocRtxChunks,
+              sctpAssocRemAddrRtx
+            }
+  STATUS    current
+  DESCRIPTION
+       "Statistics group. It includes the objects to collect state
+       changes in the SCTP protocol local layer and flow control
+       statistics."
+  ::= { sctpMibGroups 2 }
+
+sctpPerAssocParamsGroup OBJECT-GROUP
+  OBJECTS   { sctpAssocRemHostName,
+              sctpAssocLocalPort,
+              sctpAssocRemPort,
+              sctpAssocRemPrimAddrType,
+              sctpAssocRemPrimAddr,
+              sctpAssocHeartBeatInterval,
+              sctpAssocState,
+              sctpAssocInStreams,
+              sctpAssocOutStreams,
+              sctpAssocMaxRetr,
+              sctpAssocPrimProcess,
+              sctpAssocStartTime,
+              sctpAssocDiscontinuityTime,
+              sctpAssocLocalAddrStartTime,
+              sctpAssocRemAddrActive,
+              sctpAssocRemAddrHBActive,
+              sctpAssocRemAddrRTO,
+              sctpAssocRemAddrMaxPathRtx,
+              sctpAssocRemAddrStartTime
+            }
+  STATUS    current
+  DESCRIPTION
+       "The SCTP group of objects to manage per-association
+       parameters. These variables include all the SCTP basic
+       features."
+  ::= { sctpMibGroups 3 }
+
+sctpPerAssocStatsGroup OBJECT-GROUP
+              OBJECTS
+            { sctpAssocT1expireds,
+              sctpAssocT2expireds,
+              sctpAssocRtxChunks,
+              sctpAssocRemAddrRtx
+            }
+  STATUS    current
+  DESCRIPTION
+       "Per Association Statistics group. It includes the objects to
+       collect flow control statistics per association."
+  ::= { sctpMibGroups 4 }
+
+sctpInverseGroup OBJECT-GROUP
+  OBJECTS   { sctpLookupLocalPortStartTime,
+             sctpLookupRemPortStartTime,
+             sctpLookupRemHostNameStartTime,
+             sctpLookupRemPrimIPAddrStartTime,
+             sctpLookupRemIPAddrStartTime
+            }
+  STATUS    current
+  DESCRIPTION
+       "Objects used in the inverse lookup tables."
+  ::= { sctpMibGroups 5 }
+
+-- 4.1.2 Compliance Statements
+
+--
+-- MODULE COMPLIANCES
+--
+
+sctpMibCompliance MODULE-COMPLIANCE
+  STATUS  current
+  DESCRIPTION
+       "The compliance statement for SNMP entities which implement
+       this SCTP MIB Module.
+
+       There are a number of INDEX objects that cannot be represented
+       in the form of OBJECT clauses in SMIv2, but for which we have
+       the following compliance requirements, expressed in OBJECT
+       clause form in this description clause:
+
+-- OBJECT        sctpAssocLocalAddrType
+-- SYNTAX        InetAddressType {ipv4(1), ipv6(2)}
+-- DESCRIPTION
+--       It is only required to have IPv4 and IPv6 addresses without
+--       zone indices.
+--       The address with zone indices is required if an
+--       implementation can connect multiple zones.
+--
+-- OBJECT        sctpAssocLocalAddr
+-- SYNTAX        InetAddress (SIZE(4|16))
+-- DESCRIPTION
+--       An implementation is only required to support globally
+--       unique IPv4 and IPv6 addresses.
+--
+-- OBJECT        sctpAssocRemAddrType
+-- SYNTAX        InetAddressType {ipv4(1), ipv6(2)}
+-- DESCRIPTION
+--       It is only required to have IPv4 and IPv6 addresses without
+--       zone indices.
+--       The address with zone indices is required if an
+--       implementation can connect multiple zones.
+--
+-- OBJECT        sctpAssocRemAddr
+-- SYNTAX        InetAddress (SIZE(4|16))
+-- DESCRIPTION
+--       An implementation is only required to support globally
+--       unique IPv4 and IPv6 addresses.
+--
+       "  -- closes DESCRIPTION clause of MODULE-COMPLIANCE
+
+  MODULE  -- this module
+
+       MANDATORY-GROUPS    {  sctpLayerParamsGroup,
+                              sctpPerAssocParamsGroup,
+                              sctpStatsGroup,
+                              sctpPerAssocStatsGroup
+                           }
+
+       OBJECT  sctpAssocRemPrimAddrType
+       SYNTAX  InetAddressType { ipv4(1),
+                                 ipv6(2)
+                               }
+       DESCRIPTION
+            "It is only required to have IPv4 and IPv6 addresses
+            without zone indices.
+
+            The address with zone indices is required if an
+            implementation can connect multiple zones."
+
+       OBJECT  sctpAssocRemPrimAddr
+       SYNTAX  InetAddress (SIZE(4|16))
+       DESCRIPTION
+            "An implementation is only required to support globally
+            unique IPv4 and globally unique IPv6 addresses."
+
+       OBJECT sctpAssocState
+       WRITE-SYNTAX  INTEGER { deleteTCB(9) }
+       MIN-ACCESS read-only
+       DESCRIPTION
+            "Only the deleteTCB(9) value MAY be set by a management
+            station at most. A read-only option is also considered to
+            be compliant with this MIB module description."
+
+       GROUP sctpInverseGroup
+       DESCRIPTION
+            "Objects used in inverse lookup tables. This should be
+            implemented, at the discretion of the implementers, for
+            easier lookups in the association tables"
+  ::= { sctpMibCompliances 1 }
+
+END
diff --git a/snmp_builder/mibs/SFLOW-MIB.mib b/snmp_builder/mibs/SFLOW-MIB.mib
new file mode 100644
index 0000000..2ebd46a
--- /dev/null
+++ b/snmp_builder/mibs/SFLOW-MIB.mib
@@ -0,0 +1,389 @@
+SFLOW-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+MODULE-IDENTITY, OBJECT-TYPE, Integer32, enterprises
+        FROM SNMPv2-SMI
+SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+OwnerString
+        FROM RMON-MIB
+InetAddressType, InetAddress
+        FROM INET-ADDRESS-MIB
+MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+sFlowMIB  MODULE-IDENTITY
+  LAST-UPDATED "200105150000Z"   -- May 15, 2001
+  ORGANIZATION "InMon Corp."
+  CONTACT-INFO
+         "Peter Phaal
+          InMon Corp.
+          http://www.inmon.com/
+
+          Tel:  +1-415-661-6343
+          Email: peter_phaal@inmon.com"
+  DESCRIPTION
+          "The MIB module for managing the generation and transportation
+           of sFlow data records."
+
+  --
+  -- Revision History
+  --
+  REVISION    "200105150000Z"     -- May 15, 2001
+  DESCRIPTION
+          "Version 1.2
+
+           Brings MIB into SMI v2 compliance."
+
+  REVISION    "200105010000Z"      -- May 1, 2001
+  DESCRIPTION
+           "Version 1.1
+
+            Adds sFlowDatagramVersion."
+  ::= { enterprises 4300 1 }
+
+sFlowAgent OBJECT IDENTIFIER ::= { sFlowMIB 1 }
+
+sFlowVersion OBJECT-TYPE
+     SYNTAX      SnmpAdminString
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Uniquely identifies the version and implementation of this MIB.
+        The version string must have the following structure:
+           <MIB Version>;<Organization>;<Software Revision>
+        where:
+           <MIB Version>  must be '1.2', the version of this MIB.
+           <Organization> the name of the organization responsible
+                            for the agent implementation.
+           <Revision>     the specific software build of this agent.
+
+        As an example, the string '1.2;InMon Corp.;2.1.1' indicates
+        that this agent implements version '1.2' of the SFLOW MIB, that
+        it was developed by 'InMon Corp.' and that the software build
+        is '2.1.1'.
+
+        The MIB Version will change with each revision of the SFLOW
+
+        MIB.
+
+        Management entities must check the MIB Version and not attempt
+        to manage agents with MIB Versions greater than that for which
+        they were designed.
+
+        Note: The sFlow Datagram Format has an independent version
+              number which may change independently from <MIB Version>.
+              <MIB Version> applies to the structure and semantics of
+              the SFLOW MIB only."
+     DEFVAL { "1.2;;" }
+     ::= { sFlowAgent 1 }
+
+sFlowAgentAddressType OBJECT-TYPE
+     SYNTAX      InetAddressType
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The address type of the address associated with this agent.
+        Only ipv4 and ipv6 types are supported."
+     ::= { sFlowAgent 2 }
+
+sFlowAgentAddress OBJECT-TYPE
+     SYNTAX      InetAddress
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The IP address associated with this agent.  In the case of a
+        multi-homed agent, this should be the loopback address of the
+        agent.  The sFlowAgent address must provide SNMP connectivity
+        to the agent.  The address should be an invariant that does not
+        change as interfaces are reconfigured, enabled, disabled,
+        added or removed.  A manager should be able to use the
+        sFlowAgentAddress as a unique key that will identify this
+        agent over extended periods of time so that a history can
+        be maintained."
+    ::= { sFlowAgent 3 }
+
+sFlowTable OBJECT-TYPE
+     SYNTAX      SEQUENCE OF SFlowEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "A table of the sFlow samplers within a device."
+     ::= { sFlowAgent 4 }
+
+sFlowEntry OBJECT-TYPE
+     SYNTAX      SFlowEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+       "Attributes of an sFlow sampler."
+     INDEX { sFlowDataSource }
+     ::= { sFlowTable 1 }
+
+SFlowEntry ::= SEQUENCE {
+     sFlowDataSource               OBJECT IDENTIFIER,
+     sFlowOwner                    OwnerString,
+     sFlowTimeout                  Integer32,
+     sFlowPacketSamplingRate       Integer32,
+     sFlowCounterSamplingInterval  Integer32,
+     sFlowMaximumHeaderSize        Integer32,
+     sFlowMaximumDatagramSize      Integer32,
+     sFlowCollectorAddressType     InetAddressType,
+     sFlowCollectorAddress         InetAddress,
+     sFlowCollectorPort            Integer32,
+     sFlowDatagramVersion          Integer32
+}
+
+sFlowDataSource OBJECT-TYPE
+     SYNTAX      OBJECT IDENTIFIER
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "Identifies the source of the data for the sFlow sampler.
+       The following data source types are currently defined:
+
+       - ifIndex.<I>
+       DataSources of this traditional form are called 'port-based'.
+       Ideally the sampling entity will perform sampling on all flows
+       originating from or destined to the specified interface.
+       However, if the switch architecture only permits input or
+       output sampling then the sampling agent is permitted to only
+       sample input flows input or output flows.  Each packet must
+       only be considered once for sampling, irrespective of the
+       number of ports it will be forwarded to.
+
+       Note: Port 0 is used to indicate that all ports on the device
+             are represented by a single data source.
+             - sFlowPacketSamplingRate applies to all ports on the
+               device capable of packet sampling.
+             - sFlowCounterSamplingInterval applies to all ports.
+
+       - smonVlanDataSource.<V>
+       A dataSource of this form refers to a 'Packet-based VLAN'
+       and is called a 'VLAN-based' dataSource.  <V> is the VLAN
+
+       ID as defined by the IEEE 802.1Q standard.  The
+       value is between 1 and 4094 inclusive, and it represents
+       an 802.1Q VLAN-ID with global scope within a given
+       bridged domain.
+       Sampling is performed on all packets received that are part
+       of the specified VLAN (no matter which port they arrived on).
+       Each packet will only be considered once for sampling,
+       irrespective of the number of ports it will be forwarded to.
+
+       - entPhysicalEntry.<N>
+       A dataSource of this form refers to a physical entity within
+       the agent (e.g., entPhysicalClass = backplane(4)) and is called
+       an 'entity-based' dataSource.
+       Sampling is performed on all packets entering the resource (e.g.
+       If the backplane is being sampled, all packets transmitted onto
+       the backplane will be considered as single candidates for
+       sampling irrespective of the number of ports they ultimately
+       reach).
+
+       Note: Since each DataSource operates independently, a packet
+             that crosses multiple DataSources may generate multiple
+             flow records."
+     ::= { sFlowEntry 1 }
+
+sFlowOwner OBJECT-TYPE
+     SYNTAX      OwnerString
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The entity making use of this sFlow sampler.  The empty string
+        indicates that the sFlow sampler is currently unclaimed.
+        An entity wishing to claim an sFlow sampler must make sure
+        that the sampler is unclaimed before trying to claim it.
+        The sampler is claimed by setting the owner string to identify
+        the entity claiming the sampler.  The sampler must be claimed
+        before any changes can be made to other sampler objects.
+
+        In order to avoid a race condition, the entity taking control
+        of the sampler must set both the owner and a value for
+        sFlowTimeout in the same SNMP set request.
+
+        When a management entity is finished using the sampler,
+        it should set its value back to unclaimed.  The agent
+        must restore all other entities this row to their
+        default values when the owner is set to unclaimed.
+
+        This mechanism provides no enforcement and relies on the
+        cooperation of management entities in order to ensure that
+
+        competition for a sampler is fairly resolved."
+     DEFVAL { "" }
+     ::= { sFlowEntry 2 }
+
+sFlowTimeout OBJECT-TYPE
+     SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The time (in seconds) remaining before the sampler is released
+        and stops sampling.  When set, the owner establishes control
+        for the specified period.  When read, the remaining time in the
+        interval is returned.
+
+        A management entity wanting to maintain control of the sampler
+        is responsible for setting a new value before the old one
+        expires.
+
+        When the interval expires, the agent is responsible for
+        restoring all other entities in this row to their default
+        values."
+     DEFVAL { 0 }
+     ::= { sFlowEntry 3 }
+
+sFlowPacketSamplingRate OBJECT-TYPE
+     SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The statistical sampling rate for packet sampling from this
+        source.
+
+        Set to N to sample 1/Nth of the packets in the monitored flows.
+        An agent should choose its own algorithm introduce variance
+        into the sampling so that exactly every Nth packet is not
+        counted.  A sampling rate of 1 counts all packets.  A sampling
+        rate of 0 disables sampling.
+
+        The agent is permitted to have minimum and maximum allowable
+        values for the sampling rate.  A minimum rate lets the agent
+        designer set an upper bound on the overhead associated with
+        sampling, and a maximum rate may be the result of hardware
+        restrictions (such as counter size).  In addition not all values
+        between the maximum and minimum may be realizable as the
+        sampling rate (again because of implementation considerations).
+
+        When the sampling rate is set the agent is free to adjust the
+        value so that it lies between the maximum and minimum values
+
+        and has the closest achievable value.
+
+        When read, the agent must return the actual sampling rate it
+        will be using (after the adjustments previously described).  The
+        sampling algorithm must converge so that over time the number
+        of packets sampled approaches 1/Nth of the total number of
+        packets in the monitored flows."
+     DEFVAL { 0 }
+     ::= { sFlowEntry 4 }
+
+sFlowCounterSamplingInterval OBJECT-TYPE
+  SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The maximum number of seconds between successive samples of the
+        counters associated with this data source.  A sampling interval
+        of 0 disables counter sampling."
+     DEFVAL { 0 }
+     ::= { sFlowEntry 5 }
+
+sFlowMaximumHeaderSize OBJECT-TYPE
+     SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The maximum number of bytes that should be copied from a
+        sampled packet.  The agent may have an internal maximum and
+        minimum permissible sizes.  If an attempt is made to set this
+        value outside the permissible range then the agent should
+        adjust the value to the closest permissible value."
+     DEFVAL { 128 }
+     ::= { sFlowEntry 6 }
+
+sFlowMaximumDatagramSize OBJECT-TYPE
+     SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+        "The maximum number of data bytes that can be sent in a single
+         sample datagram.  The manager should set this value to avoid
+         fragmentation of the sFlow datagrams."
+     DEFVAL { 1400 }
+     ::= { sFlowEntry 7 }
+
+sFlowCollectorAddressType OBJECT-TYPE
+     SYNTAX      InetAddressType
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The type of sFlowCollectorAddress."
+     DEFVAL { ipv4 }
+     ::= { sFlowEntry 8 }
+
+sFlowCollectorAddress OBJECT-TYPE
+     SYNTAX      InetAddress
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The IP address of the sFlow collector.
+        If set to 0.0.0.0 all sampling is disabled."
+     DEFVAL { "0.0.0.0" }
+     ::= { sFlowEntry 9 }
+
+sFlowCollectorPort OBJECT-TYPE
+     SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The destination port for sFlow datagrams."
+     DEFVAL { 6343 }
+     ::= { sFlowEntry 10 }
+
+sFlowDatagramVersion OBJECT-TYPE
+     SYNTAX      Integer32
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+       "The version of sFlow datagrams that should be sent.
+
+        When set to a value not support by the agent, the agent should
+        adjust the value to the highest supported value less than the
+        requested value, or return an error if no such values exist."
+     DEFVAL { 4 }
+     ::= { sFlowEntry 11 }
+
+ --
+ -- Compliance Statements
+ --
+
+sFlowMIBConformance OBJECT IDENTIFIER ::= { sFlowMIB 2 }
+sFlowMIBGroups      OBJECT IDENTIFIER ::= { sFlowMIBConformance 1 }
+sFlowMIBCompliances OBJECT IDENTIFIER ::= { sFlowMIBConformance 2 }
+
+sFlowCompliance MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+       "Compliance statements for the sFlow Agent."
+
+     MODULE -- this module
+         MANDATORY-GROUPS { sFlowAgentGroup }
+         OBJECT     sFlowAgentAddressType
+         SYNTAX     InetAddressType { ipv4(1) }
+         DESCRIPTION
+           "Agents need only support ipv4."
+
+         OBJECT sFlowCollectorAddressType
+         SYNTAX InetAddressType { ipv4(1) }
+         DESCRIPTION
+           "Agents need only support ipv4."
+     ::= { sFlowMIBCompliances 1 }
+
+sFlowAgentGroup OBJECT-GROUP
+     OBJECTS { sFlowVersion, sFlowAgentAddressType, sFlowAgentAddress,
+               sFlowDataSource, sFlowOwner, sFlowTimeout,
+               sFlowPacketSamplingRate, sFlowCounterSamplingInterval,
+               sFlowMaximumHeaderSize, sFlowMaximumDatagramSize,
+               sFlowCollectorAddressType, sFlowCollectorAddress,
+               sFlowCollectorPort, sFlowDatagramVersion }
+      STATUS current
+      DESCRIPTION
+        "A collection of objects for managing the generation and
+         transportation of sFlow data records."
+       ::= { sFlowMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/SIP-COMMON-MIB.mib b/snmp_builder/mibs/SIP-COMMON-MIB.mib
new file mode 100644
index 0000000..cc2859d
--- /dev/null
+++ b/snmp_builder/mibs/SIP-COMMON-MIB.mib
@@ -0,0 +1,1913 @@
+SIP-COMMON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    Counter32,
+    Gauge32,
+    TimeTicks,
+    Unsigned32,
+    mib-2
+          FROM SNMPv2-SMI             -- RFC 2578
+
+    RowStatus,
+    TimeStamp,
+    TruthValue
+          FROM SNMPv2-TC              -- RFC 2579
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP,
+    NOTIFICATION-GROUP
+          FROM SNMPv2-CONF            -- RFC 2580
+
+    SnmpAdminString
+          FROM SNMP-FRAMEWORK-MIB     -- RFC 3411
+
+    SipTCTransportProtocol,
+    SipTCMethodName,
+    SipTCEntityRole,
+    SipTCOptionTagHeaders
+          FROM SIP-TC-MIB             -- RFC 4780
+
+    applIndex
+          FROM NETWORK-SERVICES-MIB   -- RFC 2788
+
+    InetPortNumber
+          FROM INET-ADDRESS-MIB;      -- RFC 4001
+
+sipCommonMIB MODULE-IDENTITY
+    LAST-UPDATED "200704200000Z"
+    ORGANIZATION "IETF Session Initiation Protocol Working Group"
+    CONTACT-INFO
+             "SIP WG email: sip@ietf.org
+
+              Co-editor  Kevin Lingle
+                         Cisco Systems, Inc.
+              postal:    7025 Kit Creek Road
+                         P.O. Box 14987
+                         Research Triangle Park, NC 27709
+                         USA
+              email:     klingle@cisco.com
+              phone:     +1 919 476 2029
+
+              Co-editor  Joon Maeng
+              email:     jmaeng@austin.rr.com
+
+              Co-editor  Jean-Francois Mule
+                         CableLabs
+
+              postal:    858 Coal Creek Circle
+                         Louisville, CO 80027
+                         USA
+              email:     jf.mule@cablelabs.com
+              phone:     +1 303 661 9100
+
+              Co-editor  Dave Walker
+              email:     drwalker@rogers.com"
+    DESCRIPTION
+       "Session Initiation Protocol (SIP) Common MIB module.  This
+        module defines objects that may be common to all SIP entities.
+
+        SIP is an application-layer signaling protocol for creating,
+        modifying and terminating multimedia sessions with one or more
+        participants.  These sessions include Internet multimedia
+        conferences and Internet telephone calls.  SIP is defined in
+        RFC 3261 (June 2002).
+
+        This MIB is defined for managing objects that are common to
+        SIP User Agents (UAs), Proxy, Redirect, and Registrar servers.
+        Objects specific to each of these entities MAY be managed using
+        entity specific MIBs defined in other modules.
+
+        Copyright (C) The IETF Trust (2007).  This version of
+        this MIB module is part of RFC 4780; see the RFC itself for
+        full legal notices."
+    REVISION     "200704200000Z"
+    DESCRIPTION
+        "Initial version of the IETF SIP-COMMON-MIB module.  This
+         version published as part of RFC 4780."
+     ::= { mib-2 149 }
+
+-- Top-Level Components of this MIB.
+sipCommonMIBNotifications OBJECT IDENTIFIER ::= { sipCommonMIB 0 }
+sipCommonMIBObjects       OBJECT IDENTIFIER ::= { sipCommonMIB 1 }
+sipCommonMIBConformance   OBJECT IDENTIFIER ::= { sipCommonMIB 2 }
+
+--
+-- This MIB contains objects that are common to all SIP entities.
+--
+
+-- Common basic configuration
+sipCommonCfgBase       OBJECT IDENTIFIER ::= { sipCommonMIBObjects 1 }
+
+-- Protocol timer configuration
+sipCommonCfgTimer      OBJECT IDENTIFIER ::= { sipCommonMIBObjects 2 }
+
+-- SIP message summary statistics
+
+sipCommonSummaryStats  OBJECT IDENTIFIER ::= { sipCommonMIBObjects 3 }
+
+-- Per method statistics
+sipCommonMethodStats   OBJECT IDENTIFIER ::= { sipCommonMIBObjects 4 }
+
+-- Per Status code or status code class statistics
+sipCommonStatusCode    OBJECT IDENTIFIER ::= { sipCommonMIBObjects 5 }
+
+-- Transaction statistics
+sipCommonStatsTrans    OBJECT IDENTIFIER ::= { sipCommonMIBObjects 6 }
+
+-- Method retry statistics
+sipCommonStatsRetry    OBJECT IDENTIFIER ::= { sipCommonMIBObjects 7 }
+
+-- Other statistics
+sipCommonOtherStats    OBJECT IDENTIFIER ::= { sipCommonMIBObjects 8 }
+
+-- Accessible-for-notify objects
+sipCommonNotifObjects  OBJECT IDENTIFIER ::= { sipCommonMIBObjects 9 }
+
+--
+-- Common Configuration Objects
+--
+sipCommonCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the common configuration objects applicable
+        to all SIP entities."
+    ::= { sipCommonCfgBase 1 }
+
+sipCommonCfgEntry OBJECT-TYPE
+    SYNTAX      SipCommonCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of common configuration.
+
+        Each row represents objects for a particular SIP entity
+        instance present in this system.  applIndex is used to uniquely
+        identify these instances of SIP entities and correlate them
+        through the common framework of the NETWORK-SERVICES-MIB (RFC
+        2788)."
+    INDEX { applIndex }
+    ::= { sipCommonCfgTable 1 }
+
+SipCommonCfgEntry ::= SEQUENCE {
+
+        sipCommonCfgProtocolVersion      SnmpAdminString,
+        sipCommonCfgServiceOperStatus    INTEGER,
+        sipCommonCfgServiceStartTime     TimeTicks,
+        sipCommonCfgServiceLastChange    TimeTicks,
+        sipCommonCfgOrganization         SnmpAdminString,
+        sipCommonCfgMaxTransactions      Unsigned32,
+        sipCommonCfgServiceNotifEnable   BITS,
+        sipCommonCfgEntityType           SipTCEntityRole
+    }
+
+sipCommonCfgProtocolVersion OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object will reflect the version of SIP supported by this
+        SIP entity.  It will follow the same format as SIP version
+        information contained in the SIP messages generated by this SIP
+        entity.  For example, entities supporting SIP version 2 will
+        return 'SIP/2.0' as dictated by the standard."
+    REFERENCE
+       "RFC 3261, Section 7.1"
+    ::= { sipCommonCfgEntry 1 }
+
+sipCommonCfgServiceOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unknown(1),
+                  up(2),
+                  down(3),
+                  congested(4),
+                  restarting(5),
+                  quiescing(6),
+                  testing(7)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the current operational state of
+        the SIP application.
+
+        unknown    : The operational status cannot be determined
+                     for some reason.
+        up         : The application is operating normally and is
+                     processing (receiving and possibly issuing) SIP
+                     requests and responses.
+        down       : The application is currently unable to process
+                     SIP messages.
+        congested  : The application is operational but no additional
+
+                     inbound transactions can be accommodated at the
+                     moment.
+        restarting : The application is currently unavailable, but it
+                     is in the process of restarting and will
+                     presumably, soon be able to process SIP messages.
+        quiescing  : The application is currently operational
+                     but has been administratively put into
+                     quiescence mode.  Additional inbound
+                     transactions MAY be rejected.
+        testing    : The application is currently in test mode
+                     and MAY not be able to process SIP messages.
+
+        The operational status values defined for this object are not
+        based on any specific information contained in the SIP
+        standard."
+    ::= { sipCommonCfgEntry 2 }
+
+sipCommonCfgServiceStartTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of sysUpTime at the time the SIP entity was last
+        started.  If started prior to the last re-initialization of the
+        local network management subsystem, then this object contains a
+        zero value."
+    ::= { sipCommonCfgEntry 3 }
+
+sipCommonCfgServiceLastChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of sysUpTime at the time the SIP entity entered its
+        current operational state.  If the current state was entered
+        prior to the last re-initialization of the local network
+        management subsystem, then this object contains a zero value."
+    ::= { sipCommonCfgEntry 4 }
+
+sipCommonCfgOrganization OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the organization name that the SIP entity
+        inserts into Organization headers of SIP messages processed by
+        this system.  If the string is empty, no Organization header is
+        to be generated."
+    REFERENCE
+       "RFC 3261, Section 20.25"
+    ::= { sipCommonCfgEntry 5 }
+
+sipCommonCfgMaxTransactions OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates the maximum number of simultaneous
+        transactions per second that the SIP entity can manage.  In
+        general, the value of this object SHOULD reflect a level of
+        transaction processing per second that is considered high
+        enough to impact the system's CPU and/or memory resources to
+        the point of deteriorating SIP call processing but not high
+        enough to cause catastrophic system failure."
+    ::= { sipCommonCfgEntry 6 }
+
+sipCommonCfgServiceNotifEnable OBJECT-TYPE
+    SYNTAX      BITS {
+                  sipCommonServiceColdStart(0),
+                  sipCommonServiceWarmStart(1),
+                  sipCommonServiceStatusChanged(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "This object specifies which SIP service related notifications
+        are enabled.  Each bit represents a specific notification.  If
+        a bit has a value 1, the associated notification is enabled and
+        will be generated by the SIP entity at the appropriate time.
+
+        Support for these notifications is OPTIONAL: either none or all
+        notification values are supported.  If an implementation does
+        not support this object, it should return a 'noSuchObject'
+        exception to an SNMP GET operation.  If notifications are
+        supported, this object's default value SHOULD reflect
+        sipCommonServiceColdStart and sipCommonServiceWarmStart enabled
+        and sipCommonServiceStatusChanged disabled.
+
+        This object value SHOULD persist across reboots."
+    DEFVAL { { sipCommonServiceColdStart,
+               sipCommonServiceWarmStart } }
+    ::= { sipCommonCfgEntry 7 }
+
+sipCommonCfgEntityType OBJECT-TYPE
+    SYNTAX      SipTCEntityRole
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object identifies the list of SIP entities to which this
+        row is related.  It is defined as a bit map.  Each bit
+        represents a type of SIP entity.  If a bit has value 1, the
+        SIP entity represented by this row plays the role of this
+        entity type.  If a bit has value 0, the SIP entity represented
+        by this row does not act as this entity type.  Combinations
+        of bits can be set when the SIP entity plays multiple SIP
+        roles."
+    ::= { sipCommonCfgEntry 8 }
+
+--
+-- Support for multiple ports
+--
+sipCommonPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the list of ports that each SIP entity in
+        this system is allowed to use.  These ports can be advertised
+        using the Contact header in a REGISTER request or response."
+    ::= { sipCommonCfgBase 2 }
+
+sipCommonPortEntry OBJECT-TYPE
+    SYNTAX      SipCommonPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Specification of a particular port.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex, sipCommonPort }
+    ::= { sipCommonPortTable 1 }
+
+SipCommonPortEntry ::= SEQUENCE {
+        sipCommonPort                 InetPortNumber,
+        sipCommonPortTransportRcv     SipTCTransportProtocol
+    }
+
+sipCommonPort OBJECT-TYPE
+    SYNTAX      InetPortNumber (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object reflects a particular port that can be used by the
+        SIP application."
+    ::= { sipCommonPortEntry 1 }
+
+sipCommonPortTransportRcv OBJECT-TYPE
+    SYNTAX      SipTCTransportProtocol
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object will specify the transport protocol the SIP entity
+        will use to receive SIP messages.
+
+        This object is a bit map.  Each bit represents a transport
+        protocol.  If a bit has value 1, then that transport protocol
+        is currently being used.  If a bit has value 0, then that
+        transport protocol is currently not being used."
+    ::= { sipCommonPortEntry 2 }
+
+--
+-- Support for SIP option tags (SIP extensions).
+-- SIP extensions MAY be supported or required by SIP entities.
+--
+
+sipCommonOptionTagTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonOptionTagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains a list of the SIP option tags (SIP
+        extensions) that are either required, supported, or
+        unsupported by the SIP entity.  These option tags are
+        used in the Require, Proxy-Require, Supported, and
+        Unsupported header fields.
+
+        Example: If a user agent client supports, and requires the
+        server to support, reliability of provisional responses
+        (RFC 3262), this table contains a row with the option tag string
+        '100rel' in sipCommonOptionTag and the OCTET STRING value of
+        '1010 0000' or '0xA0' in sipCommonOptionTagHeaderField.
+
+        If a server does not support the required feature (indicated in
+        a Require header to a UAS, or in a Proxy-Require to a Proxy
+        Server), the server returns a 420 Bad Extension listing the
+        feature in an Unsupported header.
+
+        Normally, the list of such features supported by an entity is
+        static (i.e., will not change over time)."
+    REFERENCE
+       "RFC 3261, Sections 19.2, 20.32, 20.29, 20.37, and 20.40"
+    ::= { sipCommonCfgBase 3 }
+
+sipCommonOptionTagEntry OBJECT-TYPE
+    SYNTAX      SipCommonOptionTagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A particular SIP option tag (extension) supported or
+        unsupported by the SIP entity, and which may be supported or
+        required by a peer.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex, sipCommonOptionTagIndex }
+    ::= { sipCommonOptionTagTable 1 }
+
+SipCommonOptionTagEntry ::= SEQUENCE {
+        sipCommonOptionTagIndex        Unsigned32,
+        sipCommonOptionTag             SnmpAdminString,
+        sipCommonOptionTagHeaderField  SipTCOptionTagHeaders
+    }
+
+sipCommonOptionTagIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object uniquely identifies a conceptual row in the table."
+    ::= { sipCommonOptionTagEntry 1 }
+
+sipCommonOptionTag OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates the SIP option tag.  The option tag names
+       are registered with IANA and available at http://www.iana.org."
+    REFERENCE "RFC 3261, Section 27.1"
+    ::= { sipCommonOptionTagEntry 2 }
+
+sipCommonOptionTagHeaderField OBJECT-TYPE
+    SYNTAX      SipTCOptionTagHeaders
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates whether the SIP option tag is supported
+        (Supported header), unsupported (Unsupported header), or
+        required (Require or Proxy-Require header) by the SIP entity.
+        A SIP option tag may be both supported and required."
+    ::= { sipCommonOptionTagEntry 3 }
+
+--
+-- Supported SIP Methods
+--
+sipCommonMethodSupportedTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonMethodSupportedEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains a list of methods supported by each SIP
+        entity in this system (see the standard set of SIP methods in
+        Section 7.1 of RFC 3261).  Any additional methods that may be
+        incorporated into the SIP protocol can be represented by this
+        table without any requirement to update this MIB module.
+
+        The table is informational in nature and conveys capabilities
+        of the managed system to the SNMP Manager.
+
+        From a protocol point of view, the list of methods advertised
+        by the SIP entity in the Allow header (Section 20.5 of RFC
+        3261) MUST be consistent with the methods reflected in this
+        table."
+ ::= { sipCommonCfgBase 4 }
+
+sipCommonMethodSupportedEntry OBJECT-TYPE
+    SYNTAX      SipCommonMethodSupportedEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A particular method supported by the SIP entity.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex, sipCommonMethodSupportedIndex }
+    ::= { sipCommonMethodSupportedTable 1 }
+
+SipCommonMethodSupportedEntry ::= SEQUENCE {
+        sipCommonMethodSupportedIndex     Unsigned32,
+        sipCommonMethodSupportedName      SipTCMethodName
+    }
+
+sipCommonMethodSupportedIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object uniquely identifies a conceptual row in the table
+        and reflects an assigned number used to identify a specific
+        SIP method.
+
+        This identifier is suitable for referencing the associated
+        method throughout this and other MIBs supported by this managed
+        system."
+    ::= { sipCommonMethodSupportedEntry 1 }
+
+sipCommonMethodSupportedName OBJECT-TYPE
+    SYNTAX      SipTCMethodName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the supported method's name.  The method
+        name MUST be all upper case (e.g., 'INVITE')."
+ ::= { sipCommonMethodSupportedEntry 2 }
+
+--
+-- SIP Timer Configuration
+--
+sipCommonCfgTimerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonCfgTimerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains timer configuration objects applicable to
+        SIP user agent and SIP stateful Proxy Server entities."
+    ::= { sipCommonCfgTimer 1 }
+
+sipCommonCfgTimerEntry OBJECT-TYPE
+    SYNTAX      SipCommonCfgTimerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of timer configuration.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788).
+        The objects in this table entry SHOULD be non-volatile and
+        their value SHOULD be kept at reboot."
+    INDEX { applIndex }
+    ::= { sipCommonCfgTimerTable 1 }
+
+SipCommonCfgTimerEntry ::= SEQUENCE {
+        sipCommonCfgTimerA               Unsigned32,
+        sipCommonCfgTimerB               Unsigned32,
+        sipCommonCfgTimerC               Unsigned32,
+        sipCommonCfgTimerD               Unsigned32,
+        sipCommonCfgTimerE               Unsigned32,
+        sipCommonCfgTimerF               Unsigned32,
+        sipCommonCfgTimerG               Unsigned32,
+        sipCommonCfgTimerH               Unsigned32,
+        sipCommonCfgTimerI               Unsigned32,
+        sipCommonCfgTimerJ               Unsigned32,
+        sipCommonCfgTimerK               Unsigned32,
+        sipCommonCfgTimerT1              Unsigned32,
+        sipCommonCfgTimerT2              Unsigned32,
+        sipCommonCfgTimerT4              Unsigned32
+    }
+
+sipCommonCfgTimerA OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..1000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the initial value for the retransmit timer
+        for the INVITE method.  The retransmit timer doubles after each
+        retransmission, ensuring an exponential backoff in network
+        traffic.  This object represents the initial time a SIP entity
+        will wait to receive a provisional response to an INVITE before
+        resending the INVITE request."
+    REFERENCE
+       "RFC 3261, Section 17.1.1.2"
+    DEFVAL { 500 }
+    ::= { sipCommonCfgTimerEntry 1 }
+
+sipCommonCfgTimerB OBJECT-TYPE
+    SYNTAX      Unsigned32 (32000..300000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a SIP entity will wait to
+        receive a final response to an INVITE.  The timer is started
+        upon transmission of the initial INVITE request."
+    REFERENCE
+       "RFC 3261, Section 17.1.1.2"
+    DEFVAL { 32000 }
+::= { sipCommonCfgTimerEntry 2 }
+
+sipCommonCfgTimerC OBJECT-TYPE
+    SYNTAX      Unsigned32 (180000..300000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a SIP Proxy Server will
+        wait to receive a provisional response to an INVITE.  The Timer
+        C MUST be set for each client transaction when an INVITE
+        request is proxied."
+    REFERENCE
+       "RFC 3261, Section 16.6"
+    DEFVAL { 180000 }
+    ::= { sipCommonCfgTimerEntry 3 }
+
+sipCommonCfgTimerD OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..300000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the amount of time that the server
+        transaction can remain in the 'Completed' state when unreliable
+        transports are used.  The default value MUST be equal to or
+        greater than 32000 for UDP transport, and its value MUST be 0
+        for TCP/SCTP transport."
+    REFERENCE
+       "RFC 3261, Section 17.1.1.2"
+    DEFVAL { 32000 }
+    ::= { sipCommonCfgTimerEntry 4 }
+
+sipCommonCfgTimerE OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..1000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the initial value for the retransmit timer
+        for a non-INVITE method while in 'Trying' state.  The
+        retransmit timer doubles after each retransmission until it
+        reaches T2 to ensure an exponential backoff in network traffic.
+        This object represents the initial time a SIP entity will wait
+        to receive a provisional response to the request before
+        resending the non-INVITE request."
+    REFERENCE
+       "RFC 3261, Section 17.1.2.2"
+    DEFVAL { 500 }
+    ::= { sipCommonCfgTimerEntry 5 }
+
+sipCommonCfgTimerF  OBJECT-TYPE
+    SYNTAX      Unsigned32 (32000..300000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a SIP entity will wait to
+        receive a final response to a non-INVITE request.  The timer is
+        started upon transmission of the initial request."
+    REFERENCE
+       "RFC 3261, Section 17.1.2.2"
+    DEFVAL { 32000 }
+    ::= { sipCommonCfgTimerEntry 6 }
+
+sipCommonCfgTimerG  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the initial value for the retransmit timer
+        for final responses to INVITE requests.  If timer G fires, the
+        response is passed to the transport layer again for
+        retransmission, and timer G is set to fire in MIN(2*T1, T2)
+        seconds.  From then on, when timer G fires, the response is
+        passed to the transport again for transmission, and timer G is
+        reset with a value that doubles, unless that value exceeds T2,
+        in which case, it is reset with the value of T2.  The default
+        value MUST be T1 for UDP transport, and its value MUST be 0 for
+        reliable transport like TCP/SCTP."
+    REFERENCE
+       "RFC 3261, Section 17.2.1"
+    DEFVAL { 500 }
+    ::= { sipCommonCfgTimerEntry 7 }
+
+sipCommonCfgTimerH  OBJECT-TYPE
+    SYNTAX      Unsigned32 (32000..300000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a server will wait to
+        receive an ACK before it abandons retransmitting the response.
+
+        The timer is started upon entering the 'Completed' state."
+    REFERENCE
+       "RFC 3261, Section 17.2.1"
+    DEFVAL { 32000 }
+    ::= { sipCommonCfgTimerEntry 8 }
+
+sipCommonCfgTimerI  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..10000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a SIP entity will wait to
+        receive additional ACK message retransmissions.
+
+        The timer is started upon entering the 'Confirmed' state.  The
+        default value MUST be T4 for UDP transport and its value MUST
+        be 0 for reliable transport like TCP/SCTP."
+    REFERENCE
+       "RFC 3261, Section 17.2.1"
+    DEFVAL { 5000 }
+    ::= { sipCommonCfgTimerEntry 9 }
+
+sipCommonCfgTimerJ  OBJECT-TYPE
+    SYNTAX      Unsigned32 (32000..300000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a SIP server will wait to
+        receive retransmissions of non-INVITE requests.  The timer is
+        started upon entering the 'Completed' state for non-INVITE
+        transactions.  When timer J fires, the server MUST transition to
+        the 'Terminated' state."
+    REFERENCE
+       "RFC 3261, Section 17.2.2"
+    DEFVAL { 32000 }
+    ::= { sipCommonCfgTimerEntry 10 }
+
+sipCommonCfgTimerK  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..10000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum time a SIP client will wait to
+        receive retransmissions of responses to non-INVITE requests.
+        The timer is started upon entering the 'Completed' state for
+
+        non-INVITE transactions.  When timer K fires, the server MUST
+        transition to the 'Terminated' state.  The default value MUST
+        be T4 for UDP transport, and its value MUST be 0 for reliable
+        transport like TCP/SCTP."
+    REFERENCE
+       "RFC 3261, Section 17.1.2.2"
+    DEFVAL { 5000 }
+    ::= { sipCommonCfgTimerEntry 11 }
+
+sipCommonCfgTimerT1  OBJECT-TYPE
+    SYNTAX      Unsigned32 (200..10000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the T1 timer for a SIP entity.  T1 is an
+        estimate of the round-trip time (RTT) between the client and
+        server transactions."
+    REFERENCE
+       "RFC 3261, Section 17"
+    DEFVAL { 500 }
+    ::= { sipCommonCfgTimerEntry 12 }
+
+sipCommonCfgTimerT2  OBJECT-TYPE
+    SYNTAX      Unsigned32 (200..10000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the T2 timer for a SIP entity.  T2 is the
+        maximum retransmit interval for non-INVITE requests and INVITE
+        responses.  It's used in various parts of the protocol to reset
+        other Timer* objects to this value."
+    REFERENCE
+       "RFC 3261, Section 17"
+    DEFVAL { 4000 }
+    ::= { sipCommonCfgTimerEntry 13 }
+
+sipCommonCfgTimerT4  OBJECT-TYPE
+    SYNTAX      Unsigned32 (200..10000)
+    UNITS      "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the T4 timer for a SIP entity.  T4 is the
+        maximum duration a message will remain in the network.  It
+        represents the amount of time the network will take to clear
+        messages between client and server transactions.  It's used in
+
+        various parts of the protocol to reset other Timer* objects to
+        this value."
+    REFERENCE
+       "RFC 3261, Section 17"
+    DEFVAL { 5000 }
+    ::= { sipCommonCfgTimerEntry 14 }
+
+--
+-- Common Statistics Objects
+--
+
+--
+-- Summary Statistics
+--
+sipCommonSummaryStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonSummaryStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the summary statistics objects applicable
+        to all SIP entities.  Each row represents those objects for a
+        particular SIP entity present in this system."
+    ::= { sipCommonSummaryStats 1 }
+
+sipCommonSummaryStatsEntry OBJECT-TYPE
+    SYNTAX      SipCommonSummaryStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of summary statistics.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex }
+    ::= { sipCommonSummaryStatsTable 1 }
+
+SipCommonSummaryStatsEntry ::= SEQUENCE {
+        sipCommonSummaryInRequests         Counter32,
+        sipCommonSummaryOutRequests        Counter32,
+        sipCommonSummaryInResponses        Counter32,
+        sipCommonSummaryOutResponses       Counter32,
+        sipCommonSummaryTotalTransactions  Counter32,
+        sipCommonSummaryDisconTime         TimeStamp
+    }
+
+sipCommonSummaryInRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates the total number of SIP request messages
+        received by the SIP entity, including retransmissions.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonSummaryDisconTime object in the same
+        row."
+    ::= { sipCommonSummaryStatsEntry 1 }
+
+sipCommonSummaryOutRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the total number of SIP request messages
+        sent out (originated and relayed) by the SIP entity.  Where a
+        particular message is sent more than once, for example as a
+        retransmission or as a result of forking, each transmission is
+        counted separately.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonSummaryDisconTime object in the same
+        row."
+    ::= { sipCommonSummaryStatsEntry 2 }
+
+sipCommonSummaryInResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the total number of SIP response messages
+        received by the SIP entity, including retransmissions.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonSummaryDisconTime object in the same
+        row."
+    ::= { sipCommonSummaryStatsEntry 3 }
+
+sipCommonSummaryOutResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the total number of SIP response messages
+        sent (originated and relayed) by the SIP entity including
+        retransmissions.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonSummaryDisconTime object in the same
+        row."
+    ::= { sipCommonSummaryStatsEntry 4 }
+
+sipCommonSummaryTotalTransactions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains a count of the number of transactions that
+        are in progress and transactions that have reached the
+        'Terminated' state.  It is not applicable to stateless SIP Proxy
+        Servers.
+
+        A SIP transaction occurs between a client and a server, and
+        comprises all messages from the first request sent from the
+        client to the server, up to a final (non-1xx) response sent
+        from the server to the client.
+
+        If the request is INVITE and the final response is a non-2xx,
+        the transaction also include an ACK to the response.  The ACK
+        for a 2xx response to an INVITE request is a separate
+        transaction.
+
+        The branch ID parameter in the Via header field values serves
+        as a transaction identifier.
+
+        A transaction is identified by the CSeq sequence number within
+        a single call leg.  The ACK request has the same CSeq number as
+        the corresponding INVITE request, but comprises a transaction
+        of its own.
+
+        In the case of a forked request, each branch counts as a single
+        transaction.
+
+        For a transaction stateless Proxy Server, this counter is
+        always 0.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonSummaryDisconTime object in the same
+        row."
+    ::= { sipCommonSummaryStatsEntry 5 }
+
+sipCommonSummaryDisconTime  OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        summary statistics objects in this row last experienced a
+        discontinuity."
+    ::= { sipCommonSummaryStatsEntry 6 }
+
+--
+-- SIP Method Statistics
+-- Total counts for each SIP method.
+--
+sipCommonMethodStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonMethodStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the method statistics objects for SIP
+        entities.  Each row represents those objects for a particular
+        SIP entity present in this system."
+    ::= { sipCommonMethodStats 1 }
+
+sipCommonMethodStatsEntry OBJECT-TYPE
+    SYNTAX      SipCommonMethodStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of per entity method statistics.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex, sipCommonMethodStatsName }
+    ::= { sipCommonMethodStatsTable 1 }
+
+SipCommonMethodStatsEntry ::= SEQUENCE {
+        sipCommonMethodStatsName   SipTCMethodName,
+        sipCommonMethodStatsOutbounds    Counter32,
+        sipCommonMethodStatsInbounds     Counter32,
+        sipCommonMethodStatsDisconTime   TimeStamp
+
+    }
+
+sipCommonMethodStatsName OBJECT-TYPE
+    SYNTAX      SipTCMethodName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object uniquely identifies the SIP method related to the
+        objects in a particular row."
+    ::= { sipCommonMethodStatsEntry 1 }
+
+sipCommonMethodStatsOutbounds OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of requests sent by the
+        SIP entity, excluding retransmissions.  Retransmissions are
+        counted separately and are not reflected in this counter.  A
+        Management Station can detect discontinuities in this counter
+        by monitoring the sipCommonMethodStatsDisconTime object in the
+        same row."
+    REFERENCE
+       "RFC 3261, Section 7.1"
+    ::= { sipCommonMethodStatsEntry 2 }
+
+sipCommonMethodStatsInbounds OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of requests received by
+        the SIP entity.  Retransmissions are counted separately and are
+        not reflected in this counter.  A Management Station can detect
+        discontinuities in this counter by monitoring the
+        sipCommonMethodStatsDisconTime object in the same row."
+    REFERENCE
+       "RFC 3261, Section 7.1"
+    ::= { sipCommonMethodStatsEntry 3 }
+
+sipCommonMethodStatsDisconTime  OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        method statistics objects in this row last experienced a
+        discontinuity."
+    ::= { sipCommonMethodStatsEntry 4 }
+
+--
+-- Support for specific status codes
+--
+sipCommonStatusCodeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonStatusCodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the list of SIP status codes that each SIP
+        entity in this system has been requested to monitor.  It is the
+        mechanism by which specific status codes are monitored.
+        Entries created in this table must not persist across reboots."
+    ::= { sipCommonStatusCode 1 }
+
+sipCommonStatusCodeEntry OBJECT-TYPE
+    SYNTAX      SipCommonStatusCodeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This row contains information on a particular SIP status code
+        that the SIP entity has been requested to monitor.  Entries
+        created in this table must not persist across reboots.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex, sipCommonStatusCodeMethod,
+            sipCommonStatusCodeValue }
+    ::= { sipCommonStatusCodeTable 1 }
+
+SipCommonStatusCodeEntry ::= SEQUENCE {
+        sipCommonStatusCodeMethod     SipTCMethodName,
+        sipCommonStatusCodeValue      Unsigned32,
+        sipCommonStatusCodeIns        Counter32,
+        sipCommonStatusCodeOuts       Counter32,
+        sipCommonStatusCodeRowStatus  RowStatus,
+        sipCommonStatusCodeDisconTime TimeStamp
+    }
+
+sipCommonStatusCodeMethod OBJECT-TYPE
+    SYNTAX      SipTCMethodName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object uniquely identifies a conceptual row in the
+        table."
+    ::= { sipCommonStatusCodeEntry 1 }
+
+sipCommonStatusCodeValue OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..999)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object contains a SIP status code value that the SIP
+        entity has been requested to monitor.  All of the other
+        information in the row is related to this value."
+    ::= { sipCommonStatusCodeEntry 2 }
+
+sipCommonStatusCodeIns OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of response messages
+        received by the SIP entity with the status code value contained
+        in the sipCommonStatusCodeValue column.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service, or when the
+        monitoring of the status code is temporarily disabled.  A
+        Management Station can detect discontinuities in this counter
+        by monitoring the sipCommonStatusCodeDisconTime object in the
+        same row."
+    ::= { sipCommonStatusCodeEntry 3 }
+
+sipCommonStatusCodeOuts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of response messages sent
+        by the SIP entity with the status code value contained in the
+        sipCommonStatusCodeValue column.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service, or when the
+        monitoring of the Status code is temporarily disabled.  A
+        Management Station can detect discontinuities in this counter
+        by monitoring the sipCommonStatusCodeDisconTime object in the
+        same row."
+    ::= { sipCommonStatusCodeEntry 4 }
+
+sipCommonStatusCodeRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The row augmentation in sipCommonStatusCodeNotifTable will be
+        governed by the value of this RowStatus.
+
+        The values 'createAndGo' and 'destroy' are the only valid
+        values allowed for this object.  If a row exists, it will
+        reflect a status of 'active' when queried."
+    ::= { sipCommonStatusCodeEntry 5 }
+
+sipCommonStatusCodeDisconTime  OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        status code statistics objects in this row last experienced
+        a discontinuity."
+    ::= { sipCommonStatusCodeEntry 6 }
+
+--
+-- Support for specific status code notifications
+--
+
+sipCommonStatusCodeNotifTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonStatusCodeNotifEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains objects to control notifications related to
+        particular status codes that each SIP entity in this system has
+        been requested to monitor.
+
+        There is an entry in this table corresponding to each entry in
+        sipCommonStatusCodeTable.  Therefore, this table augments
+        sipCommonStatusCodeTable and utilizes the same index
+        methodology.
+
+        The objects in this table are not included directly in the
+        sipCommonStatusCodeTable simply to keep the status code
+        notification control objects separate from the actual status
+        code statistics."
+    ::= { sipCommonStatusCode 2 }
+
+sipCommonStatusCodeNotifEntry OBJECT-TYPE
+    SYNTAX      SipCommonStatusCodeNotifEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This row contains information controlling notifications for a
+        particular SIP status code that the SIP entity has been
+        requested to monitor."
+    AUGMENTS { sipCommonStatusCodeEntry }
+    ::= { sipCommonStatusCodeNotifTable 1 }
+
+SipCommonStatusCodeNotifEntry ::= SEQUENCE {
+        sipCommonStatusCodeNotifSend         TruthValue,
+        sipCommonStatusCodeNotifEmitMode     INTEGER,
+        sipCommonStatusCodeNotifThresh       Unsigned32,
+        sipCommonStatusCodeNotifInterval     Unsigned32
+    }
+
+sipCommonStatusCodeNotifSend OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "This object controls whether a sipCommonStatusCodeNotif is
+        emitted when the status code value specified by
+        sipCommonStatusCodeValue is sent or received.  If the value of
+        this object is 'true', then a notification is sent.  If it is
+        'false', no notification is sent.
+        Note well that a notification MAY be emitted for every message
+        sent or received that contains the particular status code.
+        Depending on the status code involved, this can cause a
+        significant number of notification emissions that could be
+        detrimental to network performance.  Managers are forewarned to
+        be prudent in the use of this object to enable notifications.
+        Look to sipCommonStatusCodeNotifEmitMode for alternative
+        controls for sipCommonStatusCodeNotif emissions."
+    DEFVAL { false }
+    ::= { sipCommonStatusCodeNotifEntry 1 }
+
+sipCommonStatusCodeNotifEmitMode OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  normal(1),
+                  oneShot(2),
+                  triggered(3)  -- read-only
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The object sipCommonStatusCodeNotifSend MUST be set to 'true'
+        for the values of this object to have any effect.  It is
+        RECOMMENDED that the desired emit mode be established by this
+        object prior to setting sipCommonStatusCodeNotifSend to 'true'.
+        This object and the sipCommonStatusCodeNotifSend object can
+        obviously be set independently, but their respective values
+        will have a dependency on each other and the resulting
+        notifications.
+
+        This object specifies the mode for emissions of
+        sipCommonStatusCodeNotif notifications.
+
+        normal    : sipCommonStatusCodeNotif notifications will be
+                    emitted by the system for each SIP response
+                    message sent or received that contains the
+                    desired status code.
+
+        oneShot   : Only one sipCommonStatusCodeNotif notification
+                    will be emitted.  It will be the next SIP response
+                    message sent or received that contains the
+                    desired status code.
+
+                    No more notifications are emitted until this
+                    object is set to 'oneShot' again or set to
+                    'normal'.  This option is provided as a means of
+                    quelling the potential promiscuous behavior that
+                    can be associated with the
+                    sipCommonStatusCodeNotif.
+
+        triggered : This value is only readable and cannot be set.  It
+                    reflects that the 'oneShot' case has occurred,
+                    and indicates that the mode needs to be reset to
+                    get further notifications.  The mode is reset by
+                    setting this object to 'oneShot' or 'normal'."
+    DEFVAL { oneShot }
+    ::= { sipCommonStatusCodeNotifEntry 2 }
+
+sipCommonStatusCodeNotifThresh OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "This object specifies the number of response messages sent or
+        received by this system that are considered excessive.  Based
+        on crossing that threshold, a
+        sipCommonStatusCodeThreshExceededInNotif notification or a
+        sipCommonStatusCodeThreshExceededOutNotif will be sent.  The
+        sipCommonStatusCodeThreshExceededInNotif and
+
+        sipCommonStatusCodeThreshExceededOutNotif notifications can be
+        used as an early warning mechanism in lieu of using
+        sipCommonStatusCodeNotif.
+
+        Note that the configuration applied by this object will be
+        applied equally to inbound and outbound response messages."
+    DEFVAL { 500 }
+    ::= { sipCommonStatusCodeNotifEntry 3 }
+
+sipCommonStatusCodeNotifInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "This object specifies the time interval over which, if
+        sipCommonStatusCodeThresh is exceeded with respect to sent or
+        received messages, a sipCommonStatusCodeThreshExceededInNotif
+        or sipCommonStatusCodeThreshExceededOutNotif notification will
+        be sent.
+
+        Note that the configuration applied by this object will be
+        applied equally to inbound and outbound response messages."
+    DEFVAL { 60 }
+    ::= { sipCommonStatusCodeNotifEntry 4 }
+
+--
+-- Transaction Statistics
+--
+sipCommonTransCurrentTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonTransCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains information on the transactions currently
+        awaiting definitive responses by each SIP entity in this
+        system.
+
+        This table does not apply to transaction stateless Proxy
+        Servers."
+    ::= { sipCommonStatsTrans 1 }
+
+sipCommonTransCurrentEntry OBJECT-TYPE
+    SYNTAX      SipCommonTransCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Information on a particular SIP entity's current transactions.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex }
+    ::= { sipCommonTransCurrentTable 1 }
+
+SipCommonTransCurrentEntry ::= SEQUENCE {
+        sipCommonTransCurrentactions  Gauge32
+    }
+
+sipCommonTransCurrentactions OBJECT-TYPE
+    SYNTAX      Gauge32 (0..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the number of transactions awaiting
+        definitive (non-1xx) response.  In the case of a forked
+        request, each branch counts as a single transaction
+        corresponding to the entity identified by applIndex."
+::= { sipCommonTransCurrentEntry 1 }
+
+--
+-- SIP Retry Statistics
+--
+-- This group contains various statistics objects about
+-- retransmission counts.
+--
+sipCommonStatsRetryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonStatsRetryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains retry statistics objects applicable to each
+        SIP entity in this system."
+    ::= { sipCommonStatsRetry 1 }
+
+sipCommonStatsRetryEntry OBJECT-TYPE
+    SYNTAX      SipCommonStatsRetryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of retry statistics.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex, sipCommonStatsRetryMethod }
+    ::= { sipCommonStatsRetryTable 1 }
+
+SipCommonStatsRetryEntry ::= SEQUENCE {
+        sipCommonStatsRetryMethod            SipTCMethodName,
+        sipCommonStatsRetries                Counter32,
+        sipCommonStatsRetryFinalResponses    Counter32,
+        sipCommonStatsRetryNonFinalResponses Counter32,
+        sipCommonStatsRetryDisconTime        TimeStamp
+    }
+
+sipCommonStatsRetryMethod OBJECT-TYPE
+    SYNTAX      SipTCMethodName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object uniquely identifies the SIP method related to the
+        objects in a row."
+    ::= { sipCommonStatsRetryEntry 1 }
+
+sipCommonStatsRetries OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of request
+        retransmissions that have been sent by the SIP entity.  Note
+        that there could be multiple retransmissions per request.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonStatsRetryDisconTime object in the same
+        row."
+    ::= { sipCommonStatsRetryEntry 2 }
+
+sipCommonStatsRetryFinalResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of Final Response retries
+        that have been sent by the SIP entity.  Note that there could
+        be multiple retransmissions per request.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+
+        monitoring the sipCommonStatsRetryDisconTime object in the same
+        row."
+    ::= { sipCommonStatsRetryEntry 3 }
+
+sipCommonStatsRetryNonFinalResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the total number of non-Final Response
+        retries that have been sent by the SIP entity.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonStatsRetryDisconTime object in the same
+        row."
+    ::= { sipCommonStatsRetryEntry 4 }
+
+sipCommonStatsRetryDisconTime  OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        retry statistics objects in this row last experienced a
+        discontinuity."
+    ::= { sipCommonStatsRetryEntry 5 }
+
+--
+-- Other Common Statistics
+--
+sipCommonOtherStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipCommonOtherStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains other common statistics supported by each
+        SIP entity in this system."
+    ::= { sipCommonOtherStats 1 }
+
+sipCommonOtherStatsEntry OBJECT-TYPE
+    SYNTAX      SipCommonOtherStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Information on a particular SIP entity's other common
+        statistics.
+
+        Each row represents those objects for a particular SIP entity
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP entities and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
+    INDEX { applIndex }
+    ::= { sipCommonOtherStatsTable 1 }
+
+SipCommonOtherStatsEntry ::= SEQUENCE {
+        sipCommonOtherStatsNumUnsupportedUris     Counter32,
+        sipCommonOtherStatsNumUnsupportedMethods  Counter32,
+        sipCommonOtherStatsOtherwiseDiscardedMsgs Counter32,
+        sipCommonOtherStatsDisconTime   TimeStamp
+    }
+
+sipCommonOtherStatsNumUnsupportedUris OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Number of RequestURIs received with an unsupported scheme.
+        A server normally responds to such requests with a 400 Bad
+        Request status code.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonOtherStatsDisconTime object in the same
+        row."
+    ::= { sipCommonOtherStatsEntry 1 }
+
+sipCommonOtherStatsNumUnsupportedMethods OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Number of SIP requests received with unsupported methods.  A
+        server normally responds to such requests with a 501 (Not
+        Implemented) or 405 (Method Not Allowed).
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonOtherStatsDisconTime object in the same
+        row."
+    ::= { sipCommonOtherStatsEntry 2 }
+
+sipCommonOtherStatsOtherwiseDiscardedMsgs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Number of SIP messages received that, for any number of
+        reasons, was discarded without a response.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipCommonOtherStatsDisconTime object in the same
+        row."
+    ::= { sipCommonOtherStatsEntry 3 }
+
+sipCommonOtherStatsDisconTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        statistics objects in this row last experienced a
+        discontinuity."
+    ::= { sipCommonOtherStatsEntry 4 }
+
+--
+-- Notification related objects
+--
+
+--
+-- Status code related notification objects.
+--
+sipCommonStatusCodeNotifTo OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+       "This object contains the value of the To header in the message
+        containing the status code that caused the notification.  The
+        header name will be part of this object value.  For example,
+        'To: Watson '."
+    ::= { sipCommonNotifObjects 1 }
+
+sipCommonStatusCodeNotifFrom OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+       "This object contains the value of the From header in the
+        message containing the status code that caused the
+
+        notification.  The header name will be part of this object
+        value.  For example, 'From: Watson '."
+    ::= { sipCommonNotifObjects 2 }
+
+sipCommonStatusCodeNotifCallId OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+       "This object contains the value of the Call-ID in the message
+        containing the status code that caused the notification.  The
+        header name will be part of this object value.  For example,
+        'Call-ID: 5551212@example.com'."
+    ::= { sipCommonNotifObjects 3 }
+
+sipCommonStatusCodeNotifCSeq OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+       "This object contains the CSeq value in the message containing
+        the status code that caused the notification.  The header name
+        will be part of this object value.  For example, 'CSeq: 1722
+        INVITE'."
+    ::= { sipCommonNotifObjects 4 }
+
+--
+-- General notification related objects.
+--
+sipCommonNotifApplIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+       "This object contains the applIndex as described in RFC 2788.
+        This object is created in order to allow a variable binding
+        containing a value of applIndex in a notification."
+    ::= { sipCommonNotifObjects 5 }
+
+sipCommonNotifSequenceNumber OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+       "This object contains a sequence number for each notification
+        generated by this SIP entity.  Each notification SHOULD have a
+        unique sequence number.  A network manager can use this
+        information to determine whether notifications from a
+
+        particular SIP entity have been missed.  The value of this
+        object MUST start at 1 and increase by 1 with each generated
+        notification.  If a system restarts, the sequence number MAY
+        start again from 1."
+    ::= { sipCommonNotifObjects 6 }
+
+--
+-- Notifications
+--
+sipCommonStatusCodeNotif NOTIFICATION-TYPE
+    OBJECTS {
+       sipCommonNotifSequenceNumber,
+       sipCommonNotifApplIndex,
+       sipCommonStatusCodeNotifTo,
+       sipCommonStatusCodeNotifFrom,
+       sipCommonStatusCodeNotifCallId,
+       sipCommonStatusCodeNotifCSeq,
+       sipCommonStatusCodeIns,
+       sipCommonStatusCodeOuts
+    }
+    STATUS      current
+    DESCRIPTION
+       "Signifies that a specific status code has been sent or received
+        by the system."
+    ::= { sipCommonMIBNotifications 1 }
+
+sipCommonStatusCodeThreshExceededInNotif NOTIFICATION-TYPE
+    OBJECTS {
+       sipCommonNotifSequenceNumber,
+       sipCommonNotifApplIndex,
+       sipCommonStatusCodeIns
+    }
+    STATUS      current
+    DESCRIPTION
+       "Signifies that a specific status code was found to have been
+        received by the system frequently enough to exceed the
+        configured threshold.  This notification can be used as
+        an early warning mechanism in lieu of using
+        sipCommonStatusCodeNotif."
+    ::= { sipCommonMIBNotifications 2 }
+
+sipCommonStatusCodeThreshExceededOutNotif NOTIFICATION-TYPE
+    OBJECTS {
+       sipCommonNotifSequenceNumber,
+       sipCommonNotifApplIndex,
+       sipCommonStatusCodeOuts
+    }
+    STATUS      current
+    DESCRIPTION
+       "Signifies that a specific status code was found to have been
+        sent by the system enough to exceed the configured threshold.
+        This notification can be used as an early warning mechanism in
+        lieu of using sipCommonStatusCodeNotif."
+    ::= { sipCommonMIBNotifications 3 }
+
+sipCommonServiceColdStart NOTIFICATION-TYPE
+    OBJECTS {
+       sipCommonNotifSequenceNumber,
+       sipCommonNotifApplIndex,
+       sipCommonCfgServiceStartTime
+    }
+    STATUS      current
+    DESCRIPTION
+       "Signifies that the SIP service has reinitialized itself or
+        started for the first time.  This SHOULD result from a hard
+        'down' to 'up' administrative status change.  The configuration
+        or behavior of the service MAY be altered."
+    ::= { sipCommonMIBNotifications 4 }
+
+sipCommonServiceWarmStart NOTIFICATION-TYPE
+    OBJECTS {
+       sipCommonNotifSequenceNumber,
+       sipCommonNotifApplIndex,
+       sipCommonCfgServiceLastChange
+    }
+    STATUS      current
+    DESCRIPTION
+       "Signifies that the SIP service has reinitialized itself and is
+        restarting after an administrative 'reset'.  The configuration
+        or behavior of the service MAY be altered."
+    ::= { sipCommonMIBNotifications 5 }
+
+sipCommonServiceStatusChanged NOTIFICATION-TYPE
+    OBJECTS {
+       sipCommonNotifSequenceNumber,
+       sipCommonNotifApplIndex,
+       sipCommonCfgServiceLastChange,
+       sipCommonCfgServiceOperStatus
+    }
+    STATUS      current
+    DESCRIPTION
+       "Signifies that the SIP service operational status has changed."
+    ::= { sipCommonMIBNotifications 6 }
+
+--
+-- Conformance
+
+--
+sipCommonMIBCompliances
+    OBJECT IDENTIFIER ::= { sipCommonMIBConformance 1 }
+sipCommonMIBGroups
+    OBJECT IDENTIFIER ::= { sipCommonMIBConformance 2 }
+
+--
+-- Compliance Statements
+--
+sipCommonCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for SIP entities."
+
+    MODULE -- this module
+        MANDATORY-GROUPS { sipCommonConfigGroup,
+                           sipCommonStatsGroup
+                         }
+
+    OBJECT       sipCommonStatusCodeRowStatus
+    SYNTAX       RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+       "Support for createAndWait and notInService is not required."
+
+    OBJECT       sipCommonCfgServiceNotifEnable
+    MIN-ACCESS   not-accessible
+    DESCRIPTION
+       "This object is optional and does not need to be supported."
+
+    GROUP        sipCommonInformationalGroup
+    DESCRIPTION
+       "This group is OPTIONAL.  A SIP entity can elect to not provide
+        any support for these objects, as they provide optional
+        information."
+
+    GROUP        sipCommonConfigTimerGroup
+    DESCRIPTION
+       "This group is OPTIONAL.  A SIP entity can elect to not provide
+        any timer configuration."
+
+    GROUP        sipCommonStatsRetryGroup
+    DESCRIPTION
+       "This group is OPTIONAL.  A SIP entity can elect to not provide
+        any retry statistics."
+
+    GROUP        sipCommonNotifGroup
+    DESCRIPTION
+       "This group is OPTIONAL.  A SIP entity can elect to not provide
+        any notifications.  If implemented, the
+        sipCommonStatusCodeNotifGroup and sipCommonNotifObjectsGroup
+        MUST also be implemented."
+
+    GROUP        sipCommonStatusCodeNotifGroup
+    DESCRIPTION
+       "This group is OPTIONAL.  A SIP entity can elect to not provide
+        any notifications.  If implemented, the sipCommonNotifGroup and
+        sipCommonNotifObjectsGroup MUST also be implemented."
+
+    GROUP        sipCommonNotifObjectsGroup
+    DESCRIPTION
+       "This group is OPTIONAL.  A SIP entity can elect to not provide
+        any notifications.  If implemented, the
+        sipCommonStatusCodeNotifGroup and sipCommonNotifGroup MUST also
+        be implemented."
+    ::= { sipCommonMIBCompliances 1 }
+
+--
+-- Units of Conformance
+--
+sipCommonConfigGroup OBJECT-GROUP
+    OBJECTS {
+            sipCommonCfgProtocolVersion,
+            sipCommonCfgServiceOperStatus,
+            sipCommonCfgServiceStartTime,
+            sipCommonCfgServiceLastChange,
+            sipCommonPortTransportRcv,
+            sipCommonOptionTag,
+            sipCommonOptionTagHeaderField,
+            sipCommonCfgMaxTransactions,
+            sipCommonCfgServiceNotifEnable,
+            sipCommonCfgEntityType,
+            sipCommonMethodSupportedName
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects providing configuration common to all
+        SIP entities."
+    ::= { sipCommonMIBGroups 1 }
+
+sipCommonInformationalGroup OBJECT-GROUP
+    OBJECTS {
+            sipCommonCfgOrganization
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects providing configuration common to all
+        SIP entities."
+    ::= { sipCommonMIBGroups 2 }
+
+sipCommonConfigTimerGroup OBJECT-GROUP
+    OBJECTS {
+            sipCommonCfgTimerA,
+            sipCommonCfgTimerB,
+            sipCommonCfgTimerC,
+            sipCommonCfgTimerD,
+            sipCommonCfgTimerE,
+            sipCommonCfgTimerF,
+            sipCommonCfgTimerG,
+            sipCommonCfgTimerH,
+            sipCommonCfgTimerI,
+            sipCommonCfgTimerJ,
+            sipCommonCfgTimerK,
+            sipCommonCfgTimerT1,
+            sipCommonCfgTimerT2,
+            sipCommonCfgTimerT4
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects providing timer configuration common to
+        all SIP entities."
+    ::= { sipCommonMIBGroups 3 }
+
+sipCommonStatsGroup OBJECT-GROUP
+    OBJECTS {
+            sipCommonSummaryInRequests,
+            sipCommonSummaryOutRequests,
+            sipCommonSummaryInResponses,
+            sipCommonSummaryOutResponses,
+            sipCommonSummaryTotalTransactions,
+            sipCommonSummaryDisconTime,
+            sipCommonMethodStatsOutbounds,
+            sipCommonMethodStatsInbounds,
+            sipCommonMethodStatsDisconTime,
+            sipCommonStatusCodeIns,
+            sipCommonStatusCodeOuts,
+            sipCommonStatusCodeRowStatus,
+            sipCommonStatusCodeDisconTime,
+            sipCommonTransCurrentactions,
+            sipCommonOtherStatsNumUnsupportedUris,
+            sipCommonOtherStatsNumUnsupportedMethods,
+            sipCommonOtherStatsOtherwiseDiscardedMsgs,
+            sipCommonOtherStatsDisconTime
+
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects providing statistics common to all SIP
+        entities."
+    ::= { sipCommonMIBGroups 4 }
+
+sipCommonStatsRetryGroup OBJECT-GROUP
+    OBJECTS {
+             sipCommonStatsRetries,
+             sipCommonStatsRetryFinalResponses,
+             sipCommonStatsRetryNonFinalResponses,
+             sipCommonStatsRetryDisconTime
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects providing retry statistics."
+    ::= { sipCommonMIBGroups 5 }
+
+sipCommonNotifGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+            sipCommonStatusCodeNotif,
+            sipCommonStatusCodeThreshExceededInNotif,
+            sipCommonStatusCodeThreshExceededOutNotif,
+            sipCommonServiceColdStart,
+            sipCommonServiceWarmStart,
+            sipCommonServiceStatusChanged
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of notifications common to all SIP entities."
+    ::= { sipCommonMIBGroups 6 }
+
+sipCommonStatusCodeNotifGroup OBJECT-GROUP
+    OBJECTS {
+            sipCommonStatusCodeNotifSend,
+            sipCommonStatusCodeNotifEmitMode,
+            sipCommonStatusCodeNotifThresh,
+            sipCommonStatusCodeNotifInterval
+   }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects related to the control and attribution
+        of notifications common to all SIP entities."
+    ::= { sipCommonMIBGroups 7 }
+
+sipCommonNotifObjectsGroup OBJECT-GROUP
+
+    OBJECTS {
+            sipCommonStatusCodeNotifTo,
+            sipCommonStatusCodeNotifFrom,
+            sipCommonStatusCodeNotifCallId,
+            sipCommonStatusCodeNotifCSeq,
+            sipCommonNotifApplIndex,
+            sipCommonNotifSequenceNumber
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of accessible-for-notify objects related to the
+        notification defined in this MIB module."
+    ::= { sipCommonMIBGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/SIP-MIB.mib b/snmp_builder/mibs/SIP-MIB.mib
new file mode 100644
index 0000000..1350f1f
--- /dev/null
+++ b/snmp_builder/mibs/SIP-MIB.mib
@@ -0,0 +1,1099 @@
+SIP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+   Integer32, IpAddress                     FROM SNMPv2-SMI
+   TimeStamp, TEXTUAL-CONVENTION            FROM SNMPv2-TC
+   MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+   transmission, ifIndex, mib-2             FROM RFC1213-MIB;
+
+--  This is the MIB module for the SMDS Interface objects.
+
+sipMIB MODULE-IDENTITY
+    LAST-UPDATED "9403311818Z"
+    ORGANIZATION "IETF Interfaces Working Group"
+    CONTACT-INFO
+      "        Tracy Brown
+       Postal: Bell Communications Research
+               331 Newman Springs Road
+               P.O. Box 7020
+               Red Bank, NJ  07701-7020
+               US
+
+          Tel: +1 908  758-2107
+          Fax: +1 908  758-4177
+       E-mail: tacox@mail.bellcore.com
+
+               Kaj Tesink
+       Postal: Bell Communications Research
+               331 Newman Springs Road
+               P.O. Box 7020
+               Red Bank, NJ  07701-7020
+               US
+
+          Tel: +1 908 758 5254
+          Fax: +1 908 758 4177
+       E-mail: kaj@cc.bellcore.com."
+    DESCRIPTION
+         "The MIB module to describe
+         SMDS interfaces objects."
+    ::= { mib-2 36 }
+
+SMDSAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1h:"
+    STATUS       current
+    DESCRIPTION
+        "The 60-bit SMDS address,
+         preceded by 4 bits with the following values:
+         1100 when representing an individual address
+         1110 when representing a group address."
+    SYNTAX  OCTET STRING (SIZE (8))
+
+IfIndex ::= TEXTUAL-CONVENTION
+  STATUS  current
+  DESCRIPTION
+    "The value of this object identifies the
+    interface for which this entry contains
+    management information.  The value of this
+    object for a particular interface has the same
+    value as the ifIndex object, defined in RFC
+    1213, for the same interface."
+  SYNTAX Integer32
+
+sip     OBJECT IDENTIFIER ::= { transmission 31 }
+sipMIBObjects   OBJECT IDENTIFIER ::= { sipMIB 1 }
+
+-- The SIP Level 3 Group
+
+sipL3Table  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipL3Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains SIP L3 parameters and
+       state variables, one entry per SIPL3 interface."
+   ::= { sip 1 }
+
+sipL3Entry  OBJECT-TYPE
+    SYNTAX      SipL3Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This list contains SIP L3 parameters and
+       state variables."
+   INDEX   { sipL3Index }
+   ::= { sipL3Table 1 }
+
+SipL3Entry  ::= SEQUENCE {
+    sipL3Index                        IfIndex,
+    sipL3ReceivedIndividualDAs        Counter32,
+    sipL3ReceivedGAs                  Counter32,
+    sipL3UnrecognizedIndividualDAs    Counter32,
+    sipL3UnrecognizedGAs              Counter32,
+    sipL3SentIndividualDAs            Counter32,
+    sipL3SentGAs                      Counter32,
+    sipL3Errors                       Counter32,
+    sipL3InvalidSMDSAddressTypes      Counter32,
+    sipL3VersionSupport               Integer32
+   }
+
+sipL3Index  OBJECT-TYPE
+    SYNTAX      IfIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of this object identifies the SIP
+       L3 interface for which this entry contains
+       management information. "
+   ::= { sipL3Entry 1 }
+
+sipL3ReceivedIndividualDAs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+-- Moved to ifTable
+-- ifInUcastPkts defined in [9] must be used instead.
+    DESCRIPTION
+       "The total number of individually addressed SIP
+       Level 3 PDUs received from the remote system
+       across the SNI.  The total includes only
+       unerrored L3PDUs."
+   ::= { sipL3Entry 2 }
+
+sipL3ReceivedGAs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+-- Moved to ifTable
+-- ifInMulticastPkts defined in [9] must be used instead.
+    DESCRIPTION
+       "The total number of group addressed SIP Level 3
+       PDUs received from the remote system across the
+       SNI.  The total includes only unerrored L3PDUs."
+   ::= { sipL3Entry 3 }
+
+sipL3UnrecognizedIndividualDAs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+       "The number of SIP Level 3 PDUs received from the
+
+       remote system with invalid or unknown individual
+       destination addresses (Destination Address
+       Screening violations are not included).  See SMDS
+       Subscription MIB module."
+    ::= { sipL3Entry 4 }
+
+sipL3UnrecognizedGAs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+       "The number of SIP Level 3 PDUs received from the
+       remote system with invalid or unknown group
+       addresses.  (Destination Address Screening
+       violations are not included).  See SMDS
+       Subscription MIB module."
+    ::= { sipL3Entry 5 }
+
+sipL3SentIndividualDAs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+-- Moved to ifTable
+-- ifOutUcastPkts defined in [9] must be used instead.
+    DESCRIPTION
+       "The number of individually addressed SIP Level 3
+       PDUs that have been sent by this system across the
+       SNI."
+    ::= { sipL3Entry 6 }
+
+sipL3SentGAs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+-- Moved to ifTable
+-- ifOutMulticastPkts defined in [9] must be used instead.
+    DESCRIPTION
+       "The number of group addressed SIP L3PDUs that
+       have been sent by this system across the SNI."
+    ::= { sipL3Entry 7 }
+
+-- The total number of SIP L3PDU errors can be calculated as
+-- (Syntactic errors + Semantic Service errors )
+-- Syntactic errors include:
+--    sipL3Errors
+-- Latest occurrences of syntactic error types are logged in
+--    sipL3PDUErrorTable.
+-- Semantic Service errors include:
+
+--    sipL3UnrecognizedIndividualDAs
+--    sipL3UnrecognizedGAs
+--    sipL3InvalidSMDSAddressTypes
+-- Note that public networks supporting SMDS may discard
+-- SIP L3PDUs due to subscription violations.  Related
+-- managed objects are defined in Definitions of Managed
+-- Objects for SMDS Subscription.
+
+sipL3Errors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+-- Moved to ifTable
+-- ifInErrors defined in [9] must be used instead.
+    DESCRIPTION
+       "The total number of SIP Level 3 PDUs received
+       from the remote system that were discovered to
+       have errors (including protocol processing and bit
+       errors but excluding addressing-related errors)
+       and were discarded.  Includes both group addressed
+       L3PDUs and L3PDUs containing an individual
+       destination address."
+    ::= { sipL3Entry 8 }
+
+sipL3InvalidSMDSAddressTypes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+-- Moved to ifTable
+-- ifInUnknownProtos defined in [9] must be used instead.
+    DESCRIPTION
+       "The number of SIP Level 3 PDUs received from the
+       remote system that had the Source or Destination
+       Address_Type subfields, (the four most significant
+       bits of the 64 bit address field), not equal to
+       the value 1100 or 1110.  Also, an error is
+       considered to have occurred if the Address_Type
+       field for a Source Address, the four most
+       significant bits of the 64 bits, is equal to 1110
+       (a group address)."
+    ::= { sipL3Entry 9 }
+
+sipL3VersionSupport  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "A value which indicates the version(s) of SIP
+
+       that this interface supports.  The value is a sum.
+       This sum initially takes the value zero.  For each
+       version, V, that this interface supports, 2 raised
+       to (V - 1) is added to the sum. For example, a
+       port supporting versions 1 and 2 would have a
+       value of (2^(1-1)+2^(2-1))=3.  The
+       sipL3VersionSupport is effectively a bit mask with
+       Version 1 equal to the least significant bit
+       (LSB)."
+    ::= { sipL3Entry 10 }
+
+-- The SIP Level 2 Group
+
+sipL2Table  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipL2Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains SIP L2PDU parameters and
+       state variables, one entry per SIP L2 interface."
+    ::= { sip 2 }
+
+sipL2Entry  OBJECT-TYPE
+    SYNTAX      SipL2Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This list contains SIP L2 parameters and state
+       variables."
+    INDEX   { sipL2Index }
+    ::= { sipL2Table 1 }
+
+SipL2Entry  ::= SEQUENCE {
+    sipL2Index                     IfIndex,
+    sipL2ReceivedCounts            Counter32,
+    sipL2SentCounts                Counter32,
+    sipL2HcsOrCRCErrors            Counter32,
+    sipL2PayloadLengthErrors       Counter32,
+    sipL2SequenceNumberErrors      Counter32,
+    sipL2MidCurrentlyActiveErrors  Counter32,
+    sipL2BomOrSSMsMIDErrors        Counter32,
+    sipL2EomsMIDErrors             Counter32
+  }
+
+sipL2Index  OBJECT-TYPE
+    SYNTAX      IfIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of this object identifies the SIP
+       interface for which this entry contains management
+       information."
+    ::= { sipL2Entry 1 }
+
+sipL2ReceivedCounts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of SIP Level 2 PDUs received from the
+       remote system across the SNI. The total includes
+       only unerrored L2PDUs."
+    ::= { sipL2Entry 2 }
+
+sipL2SentCounts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of SIP Level 2 PDUs that have been
+       sent by this system across the SNI."
+    ::= { sipL2Entry 3 }
+
+-- The following error types are counted, and
+-- preclude sipL2ReceivedCounts to be incremented:
+--    sipL2HcsOrCRCErrors
+--    sipL2PayloadLengthErrors
+--    sipL2SequenceNumberErrors
+--    sipL2BomOrSSMsMIDErrors
+--    sipL2EomsMIDErrors
+-- The receipt of SIP Level 2 PDUs which are BOMs and
+-- for with a MID that is already active will cause
+-- sipL2MidCurrentlyActiveErrors to increment.
+-- Any already accumulated (correct) segmentation
+-- units are discarded.The sipL2ReceivedCounts
+-- is incremented by 1. Thus,
+-- sipL2ReceivedCounts defines the number of
+-- correct SIP Level 2 PDUs delivered to the reassembly
+-- process.
+
+sipL2HcsOrCRCErrors  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of received SIP Level 2 PDUs that were
+       discovered to have either a Header Check Sequence
+       error or a Payload CRC violation."
+    ::= { sipL2Entry 4 }
+
+sipL2PayloadLengthErrors  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of received SIP Level 2 PDUs that had
+       Payload Length errors that fall in the following
+       specifications:
+       - SSM L2_PDU payload length field value less
+       - than 28 octets or greater than 44 octets,
+       - BOM or COM L2_PDU payload length field not
+       - equal to 44 octets,
+       - EOM L2_PDU payload length field value less
+       - than 4 octets or greater than 44 octets."
+    ::= { sipL2Entry 5 }
+
+sipL2SequenceNumberErrors  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of received SIP Level 2 PDUs that had
+       a sequence number within the L2PDU not equal to
+       the expected sequence number of the SMDS SS
+       receive process."
+    ::= { sipL2Entry 6 }
+
+sipL2MidCurrentlyActiveErrors  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of received SIP Level 2 PDUs that are
+       BOMs for which an active receive process is
+       already started."
+    ::= { sipL2Entry 7 }
+
+sipL2BomOrSSMsMIDErrors  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of received SIP Level 2 PDUs that are
+       SSMs with a MID not equal to zero or are BOMs with
+       MIDs equal to zero."
+    ::= { sipL2Entry 8 }
+
+sipL2EomsMIDErrors  OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The number of received SIP Level 2 PDUs that are
+       EOMs for which there is no active receive process
+       for the MID (i.e., the receipt of an EOM which
+       does not correspond to a BOM) OR the EOM has a MID
+       equal to zero."
+    ::= { sipL2Entry 9 }
+
+-- The SIP PLCP Group
+
+sipPLCP OBJECT IDENTIFIER ::= { sip 3 }
+
+-- The DS1 PLCP Group
+
+sipDS1PLCPTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipDS1PLCPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains SIP DS1 PLCP parameters and
+       state variables, one entry per SIP port."
+    ::= { sipPLCP 1 }
+
+sipDS1PLCPEntry  OBJECT-TYPE
+    SYNTAX      SipDS1PLCPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This list contains SIP DS1 PLCP parameters and
+       state variables."
+    INDEX   { sipDS1PLCPIndex }
+    ::= { sipDS1PLCPTable 1 }
+
+SipDS1PLCPEntry  ::= SEQUENCE {
+    sipDS1PLCPIndex       IfIndex,
+    sipDS1PLCPSEFSs       Counter32,
+    sipDS1PLCPAlarmState  INTEGER,
+    sipDS1PLCPUASs        Counter32
+    }
+
+sipDS1PLCPIndex  OBJECT-TYPE
+    SYNTAX      IfIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of this object identifies the
+       interface for which this entry contains management
+       information. "
+    ::= { sipDS1PLCPEntry 1 }
+
+sipDS1PLCPSEFSs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "A DS1 Severely Errored Framing Second (SEFS) is a
+       count of one-second intervals containing one or
+       more SEF events.  A Severely Errored Framing (SEF)
+       event is declared when an error in the A1 octet
+       and an error in the A2 octet of a framing octet
+       pair (i.e., errors in both framing octets), or two
+       consecutive invalid and/or nonsequential Path
+       Overhead Identifier octets are detected."
+    ::= { sipDS1PLCPEntry 2 }
+
+sipDS1PLCPAlarmState OBJECT-TYPE
+    SYNTAX  INTEGER     {
+                noAlarm (1),
+                receivedFarEndAlarm (2),
+                incomingLOF (3)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This variable indicates if there is an alarm
+       present for the DS1 PLCP.  The value
+       receivedFarEndAlarm means that the DS1 PLCP has
+       received an incoming Yellow Signal, the value
+       incomingLOF means that the DS1 PLCP has declared a
+       loss of frame (LOF) failure condition, and the
+       value noAlarm means that there are no alarms
+       present.  See TR-TSV-000773 for a description of
+       alarm states."
+    ::= { sipDS1PLCPEntry 3 }
+
+sipDS1PLCPUASs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The counter associated with the number of
+       Unavailable Seconds, as defined by TR-TSV-000773,
+       encountered by the PLCP."
+    ::= { sipDS1PLCPEntry 4 }
+
+-- The DS3 PLCP Group
+
+sipDS3PLCPTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipDS3PLCPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains SIP DS3 PLCP parameters and
+       state variables, one entry per SIP port."
+    ::= { sipPLCP 2 }
+
+sipDS3PLCPEntry  OBJECT-TYPE
+    SYNTAX      SipDS3PLCPEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This list contains SIP DS3 PLCP parameters and
+       state variables."
+    INDEX   { sipDS3PLCPIndex }
+    ::= { sipDS3PLCPTable 1 }
+
+SipDS3PLCPEntry  ::= SEQUENCE {
+    sipDS3PLCPIndex       IfIndex,
+    sipDS3PLCPSEFSs       Counter32,
+    sipDS3PLCPAlarmState  INTEGER,
+    sipDS3PLCPUASs        Counter32
+    }
+
+sipDS3PLCPIndex  OBJECT-TYPE
+    SYNTAX      IfIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of this object identifies the
+       interface for which this entry contains management
+       information.  "
+    ::= { sipDS3PLCPEntry 1 }
+
+sipDS3PLCPSEFSs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "A DS3 Severely Errored Framing Second (SEFS) is a
+       count of one-second intervals containing one or
+       more SEF events.  A Severely Errored Framing (SEF)
+       event is declared when an error in the A1 octet
+       and an error in the A2 octet of a framing octet
+       pair (i.e., errors in both framing octets), or two
+       consecutive invalid and/or nonsequential Path
+       Overhead Identifier octets are detected."
+    ::= { sipDS3PLCPEntry 2 }
+
+sipDS3PLCPAlarmState OBJECT-TYPE
+    SYNTAX  INTEGER     {
+                noAlarm (1),
+                receivedFarEndAlarm (2),
+                incomingLOF (3)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This variable indicates if there is an alarm
+       present for the DS3 PLCP.  The value
+       receivedFarEndAlarm means that the DS3 PLCP has
+       received an incoming Yellow Signal, the value
+       incomingLOF means that the DS3 PLCP has declared a
+       loss of frame (LOF) failure condition, and the
+       value noAlarm means that there are no alarms
+       present.  See TR-TSV-000773 for a description of
+       alarm states."
+    ::= { sipDS3PLCPEntry 3 }
+
+sipDS3PLCPUASs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The counter associated with the number of
+       Unavailable Seconds, as defined by TR-TSV-000773,
+       encountered by the PLCP."
+    ::= { sipDS3PLCPEntry 4 }
+
+-- The SMDS Applications group
+-- Applications that have been identified for this group are:
+
+--          * IP-over-SMDS (details are specified in RFC 1209)
+
+smdsApplications OBJECT IDENTIFIER ::= { sip 4 }
+
+ipOverSMDS OBJECT IDENTIFIER ::= { smdsApplications 1 }
+
+-- Although the objects in this group are read-only, at the
+-- agent's discretion they may be made read-write so that the
+-- management station, when appropriately authorized, may
+-- change the addressing information related to the
+-- configuration of a logical IP subnetwork implemented on
+-- top of SMDS.
+
+-- This table is necessary to support RFC1209 (IP-over-SMDS)
+-- and gives information on the Group Addresses and ARP
+-- Addresses used in the Logical IP subnetwork.
+-- One SMDS address may be associated with multiple IP
+-- addresses.  One SNI may be associated with multiple LISs.
+
+ipOverSMDSTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpOverSMDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "The table of addressing information relevant to
+       this entity's IP addresses."
+    ::= { ipOverSMDS 1 }
+
+ipOverSMDSEntry OBJECT-TYPE
+    SYNTAX      IpOverSMDSEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "The addressing information for one of this
+       entity's IP addresses."
+    INDEX   { ipOverSMDSIndex, ipOverSMDSAddress }
+    ::= { ipOverSMDSTable 1 }
+
+IpOverSMDSEntry ::=
+    SEQUENCE {
+       ipOverSMDSIndex       IfIndex,
+       ipOverSMDSAddress     IpAddress,
+       ipOverSMDSHA          SMDSAddress,
+       ipOverSMDSLISGA       SMDSAddress,
+       ipOverSMDSARPReq      SMDSAddress
+       }
+
+ipOverSMDSIndex OBJECT-TYPE
+    SYNTAX      IfIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of this object identifies the
+       interface for which this entry contains management
+       information. "
+    ::= { ipOverSMDSEntry 1 }
+
+ipOverSMDSAddress OBJECT-TYPE
+     SYNTAX      IpAddress
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+       "The IP address to which this entry's addressing
+       information pertains."
+    ::= { ipOverSMDSEntry 2 }
+
+ipOverSMDSHA OBJECT-TYPE
+    SYNTAX      SMDSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The SMDS Individual address of the IP station."
+    ::= { ipOverSMDSEntry 3 }
+
+ipOverSMDSLISGA OBJECT-TYPE
+    SYNTAX      SMDSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The SMDS Group Address that has been configured
+       to identify the SMDS Subscriber-Network Interfaces
+       (SNIs) of all members of the Logical IP Subnetwork
+       (LIS) connected to the network supporting SMDS."
+    ::= { ipOverSMDSEntry 4 }
+
+ipOverSMDSARPReq OBJECT-TYPE
+    SYNTAX      SMDSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The SMDS address (individual or group) to which
+       ARP Requests are to be sent."
+    ::= { ipOverSMDSEntry 5 }
+
+-- The SMDS Carrier Selection group
+
+-- This group is used as a place holder
+-- for carrier selection objects.
+
+smdsCarrierSelection OBJECT IDENTIFIER ::= { sip 5 }
+
+-- The SIP Error Log
+
+sipErrorLog OBJECT IDENTIFIER ::= { sip 6 }
+
+sipL3PDUErrorTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipL3PDUErrorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A table that contains the latest occurrence of
+       the following syntactical SIP L3PDU errors:
+
+       - Destination Address Field Format Error,
+       The following pertains to the 60 least significant
+       bits of the 64 bit address field.  The 60 bits
+       contained in the address subfield can be used to
+       represent addresses up to 15 decimal digits.  Each
+       decimal digit shall be encoded into four bits
+       using Binary Coded Decimal (BCD), with the most
+       significant digit occurring left-most.  If not all
+       15 digits are required, then the remainder of this
+       field shall be padded on the right with bits set
+       to one.  An error is considered to have occurred:
+       a).  if the first four bits of the address
+       subfield are not BCD, OR b).  if the first four
+       bits of the address subfield are populated with
+       the country code value 0001, AND the 40 bits which
+       follow are not Binary Coded Decimal (BCD) encoded
+       values of the 10 digit addresses, OR the remaining
+       16 least significant bits are not populated with
+       1's, OR c).  if the address subfield is not
+       correct according to another numbering plan which
+       is dependent upon the carrier assigning the
+       numbers and offering SMDS.
+
+       - Source Address Field Format Error,
+       The description of this parameter is the same as
+       the description of the Destination Address Field
+       Format Error.
+
+       - Invalid BAsize Field Value,
+       An error is considered to have occurred when the
+       BAsize field of an SIP L3PDU contains a value less
+       that 32, greater than 9220 octets without the
+       CRC32 field present, greater than 9224 octets with
+       the CRC32 field present, or not equal to a
+       multiple of 4 octets,
+       - Invalid Header Extension Length Field Value,
+       An error is considered to have occurred when the
+       Header Extension Length field value is not equal
+       3.
+
+       - Invalid Header Extension - Element Length,
+       An error is considered to have occurred when the
+       Header Extension - Element Length is greater than
+       12.
+
+       - Invalid Header Extension - Version Element
+       Position, Length, or Value,
+       An error is considered to have occurred when a
+       Version element with Length=3, Type=0, and Value=1
+       does not appear first within the Header Extension,
+       or an element Type=0 appears somewhere other than
+       within the first three octets in the Header
+       Extension.
+
+       - Invalid Header Extension - Carrier Selection
+       Element Position, Length, Value or Format,
+       An error is considered to have occurred when a
+       Carrier Selection element does not appear second
+       within the Header Extension, if the Element Type
+       does not equal 1, the Element Length does not
+       equal 4, 6, or 8, the Element Value field is not
+       four BCD encoded decimal digits used in specifying
+       the Carrier Identification Code (CIC), or the
+       identified CIC code is invalid.
+
+       - Header Extension PAD Error
+
+       An error is considered to have occurred when the
+       Header Extension PAD is 9 octets in length, or if
+       the Header Extension PAD is greater than zero
+
+       octets in length and the Header Extension PAD does
+       not follow all Header Extension elements or does
+       not begin with at least one octet of all zeros.
+
+       - BEtag Mismatch Error,
+       An error is considered to have occurred when the
+       Beginning-End Tags in the SIP L3PDU header and
+       trailer are not equal.
+
+       - BAsize Field not equal to Length Field Error,
+       An error is considered to have occurred when the
+       value of the BAsize Field does not equal the value
+       of the Length Field.
+
+       - Incorrect Length Error, and
+
+       An error is considered to have occurred when the
+       the Length field value is not equal to the portion
+       of the SIP L3PDU which extends from the
+       Destination Address field up to and including the
+       CRC32 field (if present) or up to and including
+       the PAD field (if the CRC32 field is not present).
+       As an optional check, an error is considered to
+       have occurred when the length of a partially
+       received SIP L3PDU exceeds the BAsize value.
+
+       - MRI Timeout Error.
+
+       An error is considered to have occurred when the
+       elapsed time between receipt of BOM and
+       corresponding EOM exceeds the value of the MRI
+       (Message Receive Interval) for a particular
+       transport signal format.
+
+       An entry is indexed by interface number and error
+       type, and contains Source Address, Destination
+       Address and a timestamp. All these errors are
+       counted in the sipL3Errors counter.  When
+       sipL3PDUErrorTimeStamp is equal to zero, the
+       SipL3PDUErrorEntry does not contain any valid
+       information."
+    ::= { sipErrorLog 1 }
+
+sipL3PDUErrorEntry  OBJECT-TYPE
+    SYNTAX      SipL3PDUErrorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "An entry in the service disagreement table."
+    INDEX   { sipL3PDUErrorIndex, sipL3PDUErrorType }
+    ::= { sipL3PDUErrorTable 1 }
+
+SipL3PDUErrorEntry ::= SEQUENCE {
+    sipL3PDUErrorIndex       IfIndex,
+    sipL3PDUErrorType        INTEGER,
+    sipL3PDUErrorSA          SMDSAddress,
+    sipL3PDUErrorDA          SMDSAddress,
+    sipL3PDUErrorTimeStamp   TimeStamp
+    }
+
+sipL3PDUErrorIndex OBJECT-TYPE
+    SYNTAX      IfIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of this object identifies the
+       interface for which this entry contains management
+       information."
+    ::= { sipL3PDUErrorEntry 1 }
+
+sipL3PDUErrorType OBJECT-TYPE
+    SYNTAX  INTEGER {
+      erroredDAFieldFormat (1),
+      erroredSAFieldFormat (2),
+      invalidBAsizeFieldValue (3),
+      invalidHdrExtLength (4),
+      invalidHdrExtElementLength (5),
+      invalidHdrExtVersionElementPositionLenthOrValue (6),
+ invalidHdrExtCarSelectElementPositionLenghtValueOrFormat (7),
+      hePADError (8),
+      beTagMismatch (9),
+      baSizeFieldNotEqualToLengthField (10),
+      incorrectLength (11),
+      mriTimeout (12)
+    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The type of error."
+    ::= { sipL3PDUErrorEntry 2 }
+
+sipL3PDUErrorSA OBJECT-TYPE
+    SYNTAX      SMDSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "A rejected SMDS source address."
+    ::= { sipL3PDUErrorEntry 3 }
+
+sipL3PDUErrorDA OBJECT-TYPE
+    SYNTAX      SMDSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "A rejected SMDS destination address."
+    ::= { sipL3PDUErrorEntry 4 }
+
+sipL3PDUErrorTimeStamp OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The timestamp for the service disagreement.  The
+       timestamp contains the value of sysUpTime at the
+       latest occurrence of this type of service
+       disagreement.  See textual description under
+       sipL3PDUErrorTable for boundary conditions."
+    ::= { sipL3PDUErrorEntry 5 }
+
+-- The DXI Group
+
+sipDxiTable   OBJECT-TYPE
+   SYNTAX          SEQUENCE OF SipDxiEntry
+   MAX-ACCESS      not-accessible
+   STATUS          current
+   DESCRIPTION
+       "The DXI table."
+   ::= { sipMIBObjects 1 }
+
+sipDxiEntry   OBJECT-TYPE
+   SYNTAX     SipDxiEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+         "An entry in the DXI table."
+   INDEX { ifIndex }
+   ::= { sipDxiTable 1 }
+
+SipDxiEntry ::=
+   SEQUENCE {
+      sipDxiCrc
+
+         INTEGER,
+      sipDxiOutDiscards
+         Counter32,
+      sipDxiInErrors
+         Counter32,
+      sipDxiInAborts
+         Counter32,
+      sipDxiInTestFrames
+         Counter32,
+      sipDxiOutTestFrames
+         Counter32,
+      sipDxiHbpNoAcks
+         Counter32
+   }
+
+sipDxiCrc   OBJECT-TYPE
+   SYNTAX  INTEGER {
+              crc16(1),
+              crc32(2)
+              }
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+         "The value of this object indicates the type
+         of Frame Checksum used by DXI.  Current
+         choices include CCITT CRC16 or CRC32."
+   ::= { sipDxiEntry 1 }
+
+sipDxiOutDiscards   OBJECT-TYPE
+   SYNTAX     Counter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+    "The number of outbound frames discarded
+    because of congestion."
+   ::= { sipDxiEntry 2 }
+
+sipDxiInErrors   OBJECT-TYPE
+   SYNTAX     Counter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+         "The number of inbound frames discarded
+         because of errors such as frame checksum
+         (CRC) violations,
+         non-integral number of octets, address
+         and control field violations, and frame
+         size errors."
+   ::= { sipDxiEntry 3 }
+
+sipDxiInAborts  OBJECT-TYPE
+   SYNTAX     Counter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+         "The number of inbound frames discarded
+         because of an abort bit sequence (1111111)
+         received before closing flag."
+   ::= { sipDxiEntry 4 }
+
+sipDxiInTestFrames    OBJECT-TYPE
+   SYNTAX     Counter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+         "The number of unerrored,
+         inbound Test frames received
+         (generally as part of Heart
+         Beat Poll procedure)."
+   ::= { sipDxiEntry 5 }
+
+sipDxiOutTestFrames   OBJECT-TYPE
+   SYNTAX     Counter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+         "The number of unerrored,
+         outbound Test frames sent
+        (generally as part of Heart
+        Beat Poll procedure)."
+   ::= { sipDxiEntry 6 }
+
+sipDxiHbpNoAcks  OBJECT-TYPE
+   SYNTAX     Counter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+         "The number of Heart Beat
+         Poll (HBP) No Ack timeouts."
+   ::= { sipDxiEntry 7 }
+
+-- conformance information
+
+smdsConformance OBJECT IDENTIFIER ::= { sipMIB 2 }
+
+smdsGroups      OBJECT IDENTIFIER ::= { smdsConformance 1 }
+smdsCompliances OBJECT IDENTIFIER ::= { smdsConformance 2 }
+
+-- compliance statements
+
+smdsCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+       "The compliance statement for SMDS interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { sipLevel3Stuff }
+
+        GROUP       sipLevel2Stuff
+        DESCRIPTION
+            "This group is mandatory only for those
+            interfaces (SNIs) which run SIP Level 2."
+
+        GROUP       sipDS1PLCPStuff
+        DESCRIPTION
+            "This group is mandatory only for those
+            interfaces (SNIs) which run the DS1 PLCP."
+
+        GROUP       sipDS3PLCPStuff
+        DESCRIPTION
+            "This group is mandatory only for those
+            interfaces (SNIs) which run the DS3 PLCP."
+
+        GROUP       sipIPApplicationsStuff
+        DESCRIPTION
+            "This group is mandatory only for interfaces
+             operating IP over SMDS in accordance with
+             RFC1209."
+
+        GROUP       sipDxiStuff
+        DESCRIPTION
+            "This group is mandatory only for those interfaces
+            (DXI-SNI)
+            which run the DXI protocol."
+    ::= { smdsCompliances 1 }
+
+-- units of conformance
+
+sipLevel3Stuff    OBJECT-GROUP
+    OBJECTS { sipL3Index,
+              sipL3VersionSupport, sipL3PDUErrorIndex,
+              sipL3PDUErrorType,
+              sipL3PDUErrorSA, sipL3PDUErrorDA,
+              sipL3PDUErrorTimeStamp }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            applicable to all SMDS interfaces."
+    ::= { smdsGroups 1 }
+
+sipLevel2Stuff    OBJECT-GROUP
+    OBJECTS { sipL2Index, sipL2HcsOrCRCErrors,
+              sipL2PayloadLengthErrors,
+              sipL2SequenceNumberErrors,
+              sipL2MidCurrentlyActiveErrors,
+              sipL2BomOrSSMsMIDErrors,
+              sipL2EomsMIDErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to interfaces using the SIP Level 2."
+    ::= { smdsGroups 2 }
+
+sipDS1PLCPStuff    OBJECT-GROUP
+    OBJECTS { sipDS1PLCPIndex, sipDS1PLCPSEFSs,
+              sipDS1PLCPAlarmState, sipDS1PLCPUASs }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to interfaces using the DS1 PLCP."
+    ::= { smdsGroups 3 }
+
+sipDS3PLCPStuff    OBJECT-GROUP
+    OBJECTS { sipDS3PLCPIndex, sipDS3PLCPSEFSs,
+              sipDS3PLCPAlarmState, sipDS3PLCPUASs }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to interfaces using the DS3 PLCP."
+    ::= { smdsGroups 4 }
+
+sipIPApplicationsStuff    OBJECT-GROUP
+    OBJECTS { ipOverSMDSIndex, ipOverSMDSAddress,
+              ipOverSMDSHA, ipOverSMDSLISGA, ipOverSMDSARPReq }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            for running IP over SMDS."
+    ::= { smdsGroups 5 }
+
+sipDxiStuff     OBJECT-GROUP
+    OBJECTS  { sipDxiCrc, sipDxiOutDiscards,
+               sipDxiInErrors, sipDxiInAborts,
+               sipDxiInTestFrames, sipDxiOutTestFrames,
+               sipDxiHbpNoAcks }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to interfaces using the DXI protocol."
+    ::= { smdsGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/SIP-SERVER-MIB.mib b/snmp_builder/mibs/SIP-SERVER-MIB.mib
new file mode 100644
index 0000000..6a3096f
--- /dev/null
+++ b/snmp_builder/mibs/SIP-SERVER-MIB.mib
@@ -0,0 +1,869 @@
+SIP-SERVER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Counter32,
+    Unsigned32,
+    Gauge32,
+    mib-2
+          FROM SNMPv2-SMI             -- RFC 2578
+
+    TruthValue,
+    TimeStamp, DateAndTime
+          FROM SNMPv2-TC              -- RFC 2579
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+          FROM SNMPv2-CONF            -- RFC 2580
+
+    SnmpAdminString
+          FROM SNMP-FRAMEWORK-MIB     -- RFC 3411
+
+    applIndex
+          FROM NETWORK-SERVICES-MIB   -- RFC 2788
+
+    InetAddressType,
+    InetAddress
+          FROM INET-ADDRESS-MIB;      -- RFC 4001
+
+sipServerMIB MODULE-IDENTITY
+    LAST-UPDATED   "200704200000Z"
+    ORGANIZATION   "IETF Session Initiation Protocol
+                    Working Group"
+    CONTACT-INFO
+       "SIP WG email: sip@ietf.org
+
+           Co-editor: Kevin Lingle
+                      Cisco Systems, Inc.
+              postal: 7025 Kit Creek Road
+                      P.O. Box 14987
+                      Research Triangle Park, NC 27709
+                      USA
+             email:   klingle@cisco.com
+             phone:   +1 919 476 2029
+
+           Co-editor: Joon Maeng
+               email: jmaeng@austin.rr.com
+
+           Co-editor: Jean-Francois Mule
+                      CableLabs
+              postal: 858 Coal Creek Circle
+                      Louisville, CO 80027
+                      USA
+               email: jf.mule@cablelabs.com
+               phone: +1 303 661 9100
+
+           Co-editor: Dave Walker
+               email: drwalker@rogers.com
+          "
+    DESCRIPTION
+       "Session Initiation Protocol (SIP) Server MIB module.  SIP is an
+        application-layer signaling protocol for creating, modifying,
+        and terminating multimedia sessions with one or more
+        participants.  These sessions include Internet multimedia
+        conferences and Internet telephone calls.  SIP is defined in
+        RFC 3261 (June 2002).
+
+        This MIB is defined for the management of SIP Proxy, Redirect,
+        and Registrar Servers.
+
+        A Proxy Server acts as both a client and a server.  It accepts
+        requests from other clients, either responding to them or
+        passing them on to other servers, possibly after modification.
+
+        A Redirect Server accepts requests from clients and returns
+        zero or more addresses to that client.  Unlike a User Agent
+        Server, it does not accept calls.
+
+        A Registrar is a server that accepts REGISTER requests.  A
+        Registrar is typically co-located with a Proxy or Redirect
+        Server.
+
+        Copyright (C) The IETF Trust (2007).  This version of
+        this MIB module is part of RFC 4780; see the RFC itself for
+        full legal notices."
+    REVISION        "200704200000Z"
+    DESCRIPTION
+       "Initial version of the IETF SIP-SERVER-MIB module.  This
+       version published as part of RFC 4780."
+  ::= { mib-2 151 }
+
+-- Top-Level Components of this MIB.
+
+sipServerMIBObjects     OBJECT IDENTIFIER ::= { sipServerMIB 1 }
+sipServerMIBConformance OBJECT IDENTIFIER ::= { sipServerMIB 2 }
+
+--
+-- These groups contain objects common to all SIP servers.
+--
+sipServerCfg            OBJECT IDENTIFIER ::= { sipServerMIBObjects 1 }
+
+--
+-- Common Server Configuration Objects
+--
+sipServerCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains configuration objects applicable to SIP
+        Redirect and Proxy Servers."
+    ::= { sipServerCfg 1 }
+
+sipServerCfgEntry OBJECT-TYPE
+    SYNTAX      SipServerCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of common configuration.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through
+        the common framework of the NETWORK-SERVICES-MIB (RFC 2788).
+        The same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex }
+    ::= { sipServerCfgTable 1 }
+
+SipServerCfgEntry ::=
+    SEQUENCE {
+        sipServerCfgHostAddressType       InetAddressType,
+        sipServerCfgHostAddress           InetAddress
+    }
+
+sipServerCfgHostAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The type of Internet address by which the SIP server is
+        reachable."
+    REFERENCE
+       "RFC 3261, Section 19.1.1"
+    ::= { sipServerCfgEntry 1 }
+
+sipServerCfgHostAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This is the host portion of a SIP URI that is assigned to the
+        SIP server.  It MAY contain a fully qualified domain name or
+        an IP address.  The length of the value will depend on the type
+        of address specified.  The type of address given by this object
+        is controlled by sipServerCfgHostAddressType."
+    REFERENCE
+       "RFC 3261, Section 19.1.1"
+    ::= { sipServerCfgEntry 2 }
+
+--
+-- This group contains MIB objects
+-- related to SIP Proxy Servers.
+--
+sipServerProxyCfg      OBJECT IDENTIFIER ::= { sipServerMIBObjects 3 }
+
+sipServerProxyStats    OBJECT IDENTIFIER ::= { sipServerMIBObjects 4 }
+
+--
+-- Proxy Server Configuration
+--
+sipServerProxyCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerProxyCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains configuration objects applicable to SIP
+        Proxy Servers."
+    ::= { sipServerProxyCfg 1 }
+
+sipServerProxyCfgEntry OBJECT-TYPE
+    SYNTAX      SipServerProxyCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of common proxy configuration.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788).  The
+        same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex }
+    ::= { sipServerProxyCfgTable 1 }
+
+SipServerProxyCfgEntry ::=
+    SEQUENCE {
+        sipServerCfgProxyStatefulness     INTEGER,
+        sipServerCfgProxyRecursion        TruthValue,
+        sipServerCfgProxyRecordRoute      TruthValue,
+        sipServerCfgProxyAuthMethod       BITS,
+        sipServerCfgProxyAuthDefaultRealm SnmpAdminString
+    }
+
+sipServerCfgProxyStatefulness OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  stateless(1),
+                  transactionStateful(2),
+                  callStateful(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the default mode of operation for the
+        Proxy Server entity.
+
+        A stateless proxy is a logical entity that does not maintain
+        the client or server transaction state machines when it
+        processes requests.  A stateless proxy forwards every request it
+        receives downstream and every response it receives upstream.  If
+        the value of this object is stateless(1), the proxy defaults to
+        stateless operations.
+
+        A transaction stateful proxy, or simply a 'stateful proxy', is
+        a logical entity that maintains the client and server
+        transaction state machines during the processing of a request.
+        A (transaction) stateful proxy is not the same as a call
+        stateful proxy.  If the value of this object is
+        transactionStateful(2), the proxy is stateful on a transaction
+        basis.
+
+        A call stateful proxy is a logical entity if it retains state
+        for a dialog from the initiating INVITE to the terminating BYE
+        request.  A call stateful proxy is always transaction stateful,
+        but the converse is not necessarily true.  If the value of this
+        object is callStateful(3), the proxy is call stateful."
+    REFERENCE
+        "RFC 3261, Section 16"
+    ::= { sipServerProxyCfgEntry 1 }
+
+sipServerCfgProxyRecursion OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects whether or not the Proxy performs a
+        recursive search on the Contacts provided in 3xx redirects.
+
+        If the value of this object is 'true', a recursive search is
+        performed.  If the value is 'false', no search is performed,
+        and the 3xx response is sent upstream towards the source of
+        the request."
+    REFERENCE
+       "RFC 3261 Sections 16.5 and 16.6"
+    ::= { sipServerProxyCfgEntry 2 }
+
+sipServerCfgProxyRecordRoute OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+       "This object reflects whether or not the proxy adds itself to
+        the Record-Route header as a default action.  This header is
+        used to list the proxies that insist on being in the signaling
+        path for subsequent requests related to the call leg.
+
+        If the value of this object is 'true', the proxy adds itself to
+        the end of the Record-Route header, creating the header if
+        required.  If the value is 'false', the proxy does not add
+        itself to the Record-Route header."
+    REFERENCE
+       "RFC 3261, Section 20.30"
+    ::= { sipServerProxyCfgEntry 3 }
+
+--
+-- Security
+--
+sipServerCfgProxyAuthMethod OBJECT-TYPE
+    SYNTAX      BITS {
+                  none(0),
+                  tls(1),
+                  digest(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the authentication methods that MAY be
+        used to authenticate request originators.
+
+        bit 0  no authentication is performed
+        bit 1  TLS is used
+        bit 2  HTTP Digest is used."
+    REFERENCE
+       "RFC 3261 Sections 22, 23, 26, 26.2.3"
+    ::= { sipServerProxyCfgEntry 4 }
+
+sipServerCfgProxyAuthDefaultRealm OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the default realm value used in
+        Proxy-Authenticate headers.  Note that this MAY need to be
+        stored per user, in which case, this default value is ignored.
+       "
+    REFERENCE
+       "RFC 3261, Section 22.1"
+    ::= { sipServerProxyCfgEntry 5 }
+
+--
+-- Proxy Server Statistics
+--
+sipServerProxyStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerProxyStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the statistics objects applicable to all
+        SIP Proxy Servers in this system."
+    ::= { sipServerProxyStats 1 }
+
+sipServerProxyStatsEntry OBJECT-TYPE
+    SYNTAX      SipServerProxyStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of summary statistics.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788).  The
+        same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex }
+    ::= { sipServerProxyStatsTable 1 }
+
+SipServerProxyStatsEntry ::=
+    SEQUENCE {
+        sipServerProxyStatProxyReqFailures Counter32,
+        sipServerProxyStatsDisconTime      TimeStamp
+    }
+
+sipServerProxyStatProxyReqFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the number of occurrences of unsupported
+        options being specified in received Proxy-Require headers.
+        Such occurrences result in a 420 Bad Extension status code
+        being returned.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+
+        monitoring the sipServerProxyStatsDisconTime object in the same
+        row."
+    ::= { sipServerProxyStatsEntry 1 }
+
+sipServerProxyStatsDisconTime OBJECT-TYPE
+ SYNTAX      TimeStamp
+ MAX-ACCESS  read-only
+ STATUS      current
+ DESCRIPTION
+    "The value of the sysUpTime object when the counters for the server
+     statistics objects in this row last experienced a discontinuity."
+ ::= { sipServerProxyStatsEntry 2 }
+
+--
+-- This group contains MIB objects related to SIP Registrars.
+--
+sipServerRegCfg         OBJECT IDENTIFIER ::= { sipServerMIBObjects 5 }
+sipServerRegStats       OBJECT IDENTIFIER ::= { sipServerMIBObjects 6 }
+
+--
+-- Registrar Configuration
+--
+sipServerRegCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerRegCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains configuration objects applicable to SIP
+        Registrars."
+    ::= { sipServerRegCfg 1 }
+
+sipServerRegCfgEntry OBJECT-TYPE
+    SYNTAX      SipServerRegCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of common Registrar configuration.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788).  The
+        same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex }
+    ::= { sipServerRegCfgTable 1 }
+
+SipServerRegCfgEntry ::=
+
+    SEQUENCE {
+        sipServerRegMaxContactExpiryDuration  Unsigned32,
+        sipServerRegMaxUsers                  Unsigned32,
+        sipServerRegCurrentUsers              Gauge32,
+        sipServerRegDfltRegActiveInterval     Unsigned32
+    }
+
+sipServerRegMaxContactExpiryDuration OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum expiry that may be requested
+        by a User Agent for a particular Contact.  User Agents can
+        specify expiry using either an Expiry header in a REGISTER
+        request, or using an Expires parameter in a Contact header in
+        a REGISTER request.  If the value requested by the User Agent
+        is greater than the value of this object, then the contact
+        information is given the duration specified by this object, and
+        that duration is indicated to the User Agent in the response."
+    ::= { sipServerRegCfgEntry 1 }
+
+sipServerRegMaxUsers OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the maximum number of users that the
+        Registrar supports.  The current number of users is reflected
+        by sipServerRegCurrentUsers."
+    ::= { sipServerRegCfgEntry 2 }
+
+sipServerRegCurrentUsers OBJECT-TYPE
+    SYNTAX      Gauge32 (0..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the number of users currently registered
+        with the Registrar."
+    ::= { sipServerRegCfgEntry 3 }
+
+sipServerRegDfltRegActiveInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    UNITS      "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the default time interval the Registrar
+        considers registrations to be active.  The value is used to
+        compute the Expires header in the REGISTER response.  If a user
+        agent requests a time interval shorter than specified by this
+        object, the Registrar SHOULD honor that request.  If a Contact
+        entry does not have an 'expires' parameter, the value of the
+        Expires header field is used instead.  If a Contact entry has no
+        'expires' parameter and no Expires header field is present,
+        the value of this object is used as the default value."
+    REFERENCE
+       "RFC 3261, Section 10.2"
+    ::= { sipServerRegCfgEntry 4 }
+--
+-- Per User Information
+--
+sipServerRegUserTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerRegUserEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains information on all users registered to each
+        Registrar in this system."
+    ::= { sipServerRegCfg 2 }
+
+sipServerRegUserEntry OBJECT-TYPE
+    SYNTAX      SipServerRegUserEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This entry contains information for a single user registered to
+        this Registrar.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788).  The
+        same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex, sipServerRegUserIndex }
+    ::= { sipServerRegUserTable 1 }
+
+SipServerRegUserEntry ::=
+    SEQUENCE {
+        sipServerRegUserIndex                  Unsigned32,
+        sipServerRegUserUri                    SnmpAdminString,
+        sipServerRegUserAuthenticationFailures Counter32,
+        sipServerRegUserDisconTime             TimeStamp
+    }
+
+sipServerRegUserIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object uniquely identifies a conceptual row in the table."
+    ::= { sipServerRegUserEntry 1 }
+
+sipServerRegUserUri OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the user's address-of-record.  It is the
+        main form by which the Registrar knows the user.  The format is
+        typically 'user@domain'.  It is contained in the To header for
+        all REGISTER requests."
+    ::= { sipServerRegUserEntry 2 }
+
+sipServerRegUserAuthenticationFailures OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains a count of the number of times the user
+        has failed authentication.
+
+        Discontinuities in the value of this counter can occur due to
+        successful user authentications and at re-initialization of
+        the SIP entity or service.  A Management Station can detect
+        discontinuities in this counter by monitoring the
+        sipServerRegUserDisconTime object in the same row."
+    ::= { sipServerRegUserEntry 3 }
+
+sipServerRegUserDisconTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        user registration statistics objects in this row last
+        experienced a discontinuity."
+    ::= { sipServerRegUserEntry 4 }
+--
+-- Per Contact Information
+--
+sipServerRegContactTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerRegContactEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains information on every location where a
+        registered user (specified by sipServerRegUserIndex) wishes to
+        be found (i.e., the user has provided contact information to
+        each SIP Registrar in this system)."
+    ::= { sipServerRegCfg 3 }
+
+sipServerRegContactEntry OBJECT-TYPE
+    SYNTAX      SipServerRegContactEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This entry contains information for a single Contact.  Multiple
+        contacts may exist for a single user.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788).  The
+        same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex,
+            sipServerRegUserIndex,
+            sipServerRegContactIndex
+          }
+    ::= { sipServerRegContactTable 1 }
+
+SipServerRegContactEntry ::=
+    SEQUENCE {
+        sipServerRegContactIndex        Unsigned32,
+        sipServerRegContactDisplayName  SnmpAdminString,
+        sipServerRegContactURI          SnmpAdminString,
+        sipServerRegContactLastUpdated  TimeStamp,
+        sipServerRegContactExpiry       DateAndTime,
+        sipServerRegContactPreference   SnmpAdminString
+    }
+
+sipServerRegContactIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Along with the sipServerRegUserIndex, this object uniquely
+        identifies a conceptual row in the table."
+    ::= { sipServerRegContactEntry 1 }
+
+sipServerRegContactDisplayName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the display name for the Contact.  For
+        example, 'Santa at Home', or 'Santa on his Sled', corresponding
+        to contact URIs of sip:BigGuy@example.com or
+        sip:sclaus817@example.com, respectively."
+    ::= { sipServerRegContactEntry 2 }
+
+sipServerRegContactURI OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains either a SIP URI where the user can be
+        contacted.  This URI is normally returned to a client from a
+        Redirect Server, or is used as the RequestURI in a SIP request
+        line for requests forwarded by a proxy."
+    ::= { sipServerRegContactEntry 3 }
+
+sipServerRegContactLastUpdated OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates the time when this contact information
+        was accepted.  If the contact information is updated via a
+        subsequent REGISTER of the same information, this object is
+        also updated."
+    ::= { sipServerRegContactEntry 4 }
+
+sipServerRegContactExpiry OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains the date and time when the contact
+        information will no longer be valid.  Such times may be
+        specified by the user at registration (i.e., Expires header or
+        expiry parameter in the Contact information), or a system
+        default can be applied."
+    ::= { sipServerRegContactEntry 5 }
+
+sipServerRegContactPreference OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates a relative preference for the particular
+        Contact header field value compared to other bindings for this
+        address-of-record.  A registering user may provide this
+        preference as a 'qvalue' parameter in the Contact header.
+
+        The format of this item is a decimal number between 0 and 1
+        (for example 0.9).  Higher values indicate locations preferred
+        by the user."
+    REFERENCE
+       "RFC 3261, Section 10.2.1.2, 16.6, and 20.10"
+    ::= { sipServerRegContactEntry 6 }
+
+--
+-- Registrar Statistics
+--
+sipServerRegStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipServerRegStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains the summary statistics objects applicable
+        to all SIP Registrars in this system."
+    ::= { sipServerRegStats 1 }
+
+sipServerRegStatsEntry OBJECT-TYPE
+    SYNTAX      SipServerRegStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of summary statistics.
+
+        Each row represents those objects for a particular SIP server
+        present in this system.  applIndex is used to uniquely identify
+        these instances of SIP servers and correlate them through the
+        common framework of the NETWORK-SERVICES-MIB (RFC 2788).  The
+        same value of applIndex used in the corresponding
+        SIP-COMMON-MIB is used here."
+    INDEX { applIndex }
+    ::= { sipServerRegStatsTable 1 }
+
+SipServerRegStatsEntry ::=
+    SEQUENCE {
+        sipServerRegStatsAcceptedRegs     Counter32,
+        sipServerRegStatsRejectedRegs     Counter32,
+        sipServerRegStatsDisconTime       TimeStamp
+    }
+
+sipServerRegStatsAcceptedRegs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains a count of the number of REGISTER requests
+        that have been accepted (status code 200) by the Registrar.
+        This includes additions of new contact information, refreshing
+        contact information, as well as requests for deletion of
+        contact information.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipServerRegStatsDisconTime object in the same
+        row."
+    ::= { sipServerRegStatsEntry 1 }
+
+sipServerRegStatsRejectedRegs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object contains a count of the number REGISTER requests
+        that have been rejected by the Registrar.
+
+        Discontinuities in the value of this counter can occur at
+        re-initialization of the SIP entity or service.  A Management
+        Station can detect discontinuities in this counter by
+        monitoring the sipServerRegStatsDisconTime object in the same
+        row."
+  ::= { sipServerRegStatsEntry 2 }
+
+sipServerRegStatsDisconTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the sysUpTime object when the counters for the
+        registrar statistics objects in this row last experienced a
+        discontinuity."
+ ::= { sipServerRegStatsEntry 3 }
+
+--
+-- Conformance
+--
+sipServerMIBCompliances
+         OBJECT IDENTIFIER ::= { sipServerMIBConformance 1 }
+
+sipServerMIBGroups
+         OBJECT IDENTIFIER ::= { sipServerMIBConformance 2 }
+
+--
+-- Compliance Statements
+--
+sipServerProxyServerCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for SIP entities acting as Proxy
+        Servers."
+    MODULE -- this module
+        MANDATORY-GROUPS { sipServerConfigGroup,
+                           sipServerProxyConfigGroup,
+                           sipServerProxyStatsGroup
+                         }
+    ::= { sipServerMIBCompliances 1 }
+
+sipRedirectServerCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for SIP entities acting as Redirect
+        Servers."
+    MODULE -- this module
+        MANDATORY-GROUPS { sipServerConfigGroup }
+    ::= { sipServerMIBCompliances 2 }
+
+sipServerRegistrarServerCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for SIP entities acting as
+        Registrars."
+    MODULE -- this module
+        MANDATORY-GROUPS { sipServerConfigGroup,
+                           sipServerRegistrarConfigGroup,
+                           sipServerRegistrarStatsGroup }
+    GROUP sipServerRegistrarUsersGroup
+    DESCRIPTION
+       "This is an optional group."
+    ::= { sipServerMIBCompliances 3 }
+
+--
+-- Units of Conformance
+--
+sipServerConfigGroup OBJECT-GROUP
+    OBJECTS {
+            sipServerCfgHostAddressType,
+            sipServerCfgHostAddress
+
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects providing configuration common to SIP
+        Proxy and Redirect servers."
+    ::= { sipServerMIBGroups 1 }
+
+sipServerProxyConfigGroup OBJECT-GROUP
+    OBJECTS {
+            sipServerCfgProxyStatefulness,
+            sipServerCfgProxyRecursion,
+            sipServerCfgProxyRecordRoute,
+            sipServerCfgProxyAuthMethod,
+            sipServerCfgProxyAuthDefaultRealm
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects providing configuration for SIP Proxy
+        servers."
+    ::= { sipServerMIBGroups 2 }
+
+sipServerProxyStatsGroup OBJECT-GROUP
+    OBJECTS {
+            sipServerProxyStatProxyReqFailures,
+            sipServerProxyStatsDisconTime
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects providing statistics for SIP Proxy
+        servers."
+    ::= { sipServerMIBGroups 3 }
+
+sipServerRegistrarConfigGroup OBJECT-GROUP
+    OBJECTS {
+            sipServerRegMaxContactExpiryDuration,
+            sipServerRegMaxUsers,
+            sipServerRegCurrentUsers,
+            sipServerRegDfltRegActiveInterval
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects providing configuration for SIP
+        Registrars."
+    ::= { sipServerMIBGroups 4 }
+
+sipServerRegistrarStatsGroup OBJECT-GROUP
+    OBJECTS {
+            sipServerRegStatsAcceptedRegs,
+            sipServerRegStatsRejectedRegs,
+            sipServerRegStatsDisconTime
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects providing statistics for SIP
+        Registrars."
+    ::= { sipServerMIBGroups 5 }
+
+sipServerRegistrarUsersGroup OBJECT-GROUP
+    OBJECTS {
+            sipServerRegUserUri,
+            sipServerRegUserAuthenticationFailures,
+            sipServerRegUserDisconTime,
+            sipServerRegContactDisplayName,
+            sipServerRegContactURI,
+            sipServerRegContactLastUpdated,
+            sipServerRegContactExpiry,
+            sipServerRegContactPreference
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects related to registered users."
+    ::= { sipServerMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/SIP-TC-MIB.mib b/snmp_builder/mibs/SIP-TC-MIB.mib
new file mode 100644
index 0000000..61ea4d3
--- /dev/null
+++ b/snmp_builder/mibs/SIP-TC-MIB.mib
@@ -0,0 +1,177 @@
+SIP-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    mib-2
+          FROM SNMPv2-SMI        -- RFC 2578
+
+    TEXTUAL-CONVENTION
+          FROM SNMPv2-TC;        -- RFC 2579
+
+sipTC MODULE-IDENTITY
+    LAST-UPDATED "200704200000Z"
+    ORGANIZATION "IETF Session Initiation Protocol Working Group"
+    CONTACT-INFO
+             "SIP WG email: sip@ietf.org
+
+              Co-editor  Kevin Lingle
+                         Cisco Systems, Inc.
+              postal:    7025 Kit Creek Road
+                         P.O. Box 14987
+                         Research Triangle Park, NC 27709
+                         USA
+              email:     klingle@cisco.com
+              phone:     +1 919 476 2029
+
+              Co-editor  Joon Maeng
+              email:     jmaeng@austin.rr.com
+
+              Co-editor  Jean-Francois Mule
+                         CableLabs
+              postal:    858 Coal Creek Circle
+                         Louisville, CO 80027
+                         USA
+              email:     jf.mule@cablelabs.com
+              phone:     +1 303 661 9100
+
+              Co-editor  Dave Walker
+              email:     drwalker@rogers.com"
+    DESCRIPTION
+       "Session Initiation Protocol (SIP) MIB TEXTUAL-CONVENTION
+        module used by other SIP-related MIB Modules.
+
+        Copyright (C) The IETF Trust (2007).  This version of
+        this MIB module is part of RFC 4780; see the RFC itself for
+
+        full legal notices."
+    REVISION     "200704200000Z"
+    DESCRIPTION
+       "Initial version of the IETF SIP-TC-MIB module.  This version
+        published as part of RFC 4780."
+     ::= { mib-2 148 }
+
+--
+-- Textual Conventions
+--
+
+SipTCTransportProtocol ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "This convention is a bit map.  Each bit represents a transport
+        protocol.  If a bit has value 1, then that selected transport
+        protocol is in some way dependent on the context of the object
+        using this convention.  If a bit has value 0, then that
+        transport protocol is not selected.  Combinations of bits can
+        be set when multiple transport protocols are selected.
+
+        bit 0: a protocol other than those defined here
+        bit 1: User Datagram Protocol
+        bit 2: Transmission Control Protocol
+        bit 3: Stream Control Transmission Protocol
+        bit 4: Transport Layer Security Protocol over TCP
+        bit 5: Transport Layer Security Protocol over SCTP
+       "
+    REFERENCE "RFC 3261, Section 18 and RFC 4168"
+    SYNTAX      BITS {
+                  other(0),  -- none of the following
+                  udp(1),
+                  tcp(2),
+                  sctp(3),   -- RFC4168
+                  tlsTcp(4),
+                  tlsSctp(5) -- RFC 4168
+                }
+
+SipTCEntityRole ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "This convention defines the role of a SIP entity.  Examples of
+        SIP entities are proxies, user agents, redirect servers,
+        registrars, or combinations of the above.
+
+        User Agent (UA): A logical entity that can act as both a user
+        agent client and user agent server.
+
+        User Agent Client (UAC): A logical entity that creates a new
+        request, and then uses the client transaction state machinery
+        to send it.  The role of UAC lasts only for the duration of
+        that transaction.  In other words, if a piece of software
+        initiates a request, it acts as a UAC for the duration of that
+        transaction.  If it receives a request later, it assumes the
+        role of a user agent server for the processing of that
+        transaction.
+
+        User Agent Server (UAS): A logical entity that generates a
+        response to a SIP request.  The response accepts, rejects,
+        or redirects the request.  This role lasts only for the
+        duration of that transaction.  In other words, if a piece of
+        software responds to a request, it acts as a UAS for the
+        duration of that transaction.  If it generates a request
+        later, it assumes the role of a user agent client for the
+        processing of that transaction.
+
+        Proxy, Proxy Server: An intermediary entity that acts as both
+        a server and a client for the purpose of making requests on
+        behalf of other clients.  A proxy server primarily plays the
+        role of routing, which means its job is to ensure that a
+        request is sent to another entity 'closer' to the targeted
+        user.  Proxies are also useful for enforcing policy.  A proxy
+        interprets and, if necessary, rewrites specific parts of a
+        request message before forwarding it.
+
+        Redirect Server: A redirect server is a user agent server that
+        generates 3xx responses to requests it receives, directing the
+        client to contact an alternate set of URIs.
+
+        Registrar: A registrar is a server that accepts REGISTER
+        requests and places the information it receives in those
+        requests into the location service for the domain it handles."
+    REFERENCE
+       "RFC 3261, Section 6"
+    SYNTAX      BITS {
+                  other(0),
+                  userAgent(1),
+                  proxyServer(2),
+                  redirectServer(3),
+                  registrarServer(4)
+                }
+
+SipTCOptionTagHeaders ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "This convention defines the header fields that use the option
+
+        tags per Section 19.2 of RFC 3261.  These tags are used in
+        Require (Section 20.32), Proxy-Require (Section 20.29),
+        Supported (Section 20.37), and Unsupported (Section 20.40)
+        header fields."
+    REFERENCE
+       "RFC 3261, Sections 19.2, 20.32, 20.29, 20.37, and 20.40"
+    SYNTAX      BITS {
+                  require(0),       -- Require header
+                  proxyRequire(1),  -- Proxy-Require header
+                  supported(2),     -- Supported header
+                  unsupported(3)    -- Unsupported header
+                }
+
+SipTCMethodName ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "This TEXTUAL-CONVENTION is a string that uniquely identifies a
+        SIP method.  The scope of uniqueness is the context of all
+        defined SIP methods.
+
+        Experimental support of extension methods is acceptable and
+        expected.  Extension methods are those defined in
+        Internet-Draft documents but not yet allocated and
+        officially sanctioned by IANA.
+
+        To support experimental extension methods, any object using
+        this TEXTUAL-CONVENTION as syntax MAY return/accept a method
+        identifier value other than those sanctioned by IANA.  That
+        system MUST ensure no collisions with officially assigned
+        method names."
+    REFERENCE
+       "RFC 3261, Section 27.4"
+    SYNTAX      OCTET STRING (SIZE (1..100))
+
+END
diff --git a/snmp_builder/mibs/SIP-UA-MIB.mib b/snmp_builder/mibs/SIP-UA-MIB.mib
new file mode 100644
index 0000000..807f9a0
--- /dev/null
+++ b/snmp_builder/mibs/SIP-UA-MIB.mib
@@ -0,0 +1,200 @@
+SIP-UA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Unsigned32,
+    mib-2
+          FROM SNMPv2-SMI             -- RFC 2578
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+          FROM SNMPv2-CONF            -- RFC 2580
+
+    applIndex
+          FROM NETWORK-SERVICES-MIB   -- RFC 2788
+
+    InetAddressType,
+    InetAddress
+          FROM INET-ADDRESS-MIB       -- RFC 4001
+
+    SipTCEntityRole
+          FROM SIP-TC-MIB;            -- RFC 4780
+
+sipUAMIB MODULE-IDENTITY
+    LAST-UPDATED   "200704200000Z"
+    ORGANIZATION   "IETF Session Initiation Protocol Working Group"
+    CONTACT-INFO
+             "SIP WG email: sip@ietf.org
+
+              Co-editor  Kevin Lingle
+
+                         Cisco Systems, Inc.
+              postal:    7025 Kit Creek Road
+                         P.O. Box 14987
+                         Research Triangle Park, NC 27709
+                         USA
+              email:     klingle@cisco.com
+              phone:     +1 919 476 2029
+
+              Co-editor  Joon Maeng
+              email:     jmaeng@austin.rr.com
+
+              Co-editor  Jean-Francois Mule
+                         CableLabs
+              postal:    858 Coal Creek Circle
+                         Louisville, CO 80027
+                         USA
+              email:     jf.mule@cablelabs.com
+              phone:     +1 303 661 9100
+
+              Co-editor  Dave Walker
+              email:     drwalker@rogers.com"
+    DESCRIPTION
+       "Session Initiation Protocol (SIP) User Agent (UA) MIB module.
+
+        SIP is an application-layer signaling protocol for creating,
+        modifying, and terminating multimedia sessions with one or more
+        participants.  These sessions include Internet multimedia
+        conferences and Internet telephone calls.  SIP is defined in
+        RFC 3261 (June 2002).
+
+        A User Agent is an application that contains both a User Agent
+        Client (UAC) and a User Agent Server (UAS).  A UAC is an
+        application that initiates a SIP request.  A UAS is an
+        application that contacts the user when a SIP request is
+        received and that returns a response on behalf of the user.
+        The response accepts, rejects, or redirects the request.
+
+        Copyright (C) The IETF Trust (2007).  This version of
+        this MIB module is part of RFC 4780; see the RFC itself for
+        full legal notices."
+    REVISION        "200704200000Z"
+    DESCRIPTION
+       "Initial version of the IETF SIP-UA-MIB module.  This version
+        published as part of RFC 4780."
+     ::= { mib-2 150 }
+
+-- Top-Level Components of this MIB.
+sipUAMIBObjects        OBJECT IDENTIFIER ::= { sipUAMIB 1 }
+
+sipUAMIBConformance    OBJECT IDENTIFIER ::= { sipUAMIB 2 }
+
+--
+-- This MIB contains objects related to SIP User Agents.
+--
+sipUACfgServer         OBJECT IDENTIFIER ::= { sipUAMIBObjects 1 }
+
+--
+-- SIP Server Configuration
+--
+sipUACfgServerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SipUACfgServerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This table contains SIP server configuration objects applicable
+        to each SIP user agent in this system."
+    ::= { sipUACfgServer 1 }
+
+sipUACfgServerEntry OBJECT-TYPE
+    SYNTAX      SipUACfgServerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A row of server configuration.
+
+        Each row represents those objects for a particular SIP user
+        agent present in this system.  applIndex is used to uniquely
+        identify these instances of SIP user agents and correlate
+        them through the common framework of the NETWORK-SERVICES-MIB
+        (RFC 2788).  The same value of applIndex used in the
+        corresponding SIP-COMMON-MIB is used here."
+    INDEX { applIndex, sipUACfgServerIndex }
+    ::= { sipUACfgServerTable 1 }
+
+SipUACfgServerEntry ::= SEQUENCE {
+        sipUACfgServerIndex       Unsigned32,
+        sipUACfgServerAddressType InetAddressType,
+        sipUACfgServerAddress     InetAddress,
+        sipUACfgServerRole        SipTCEntityRole
+    }
+
+sipUACfgServerIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A unique identifier of a server address when multiple addresses
+
+        are configured by the SIP entity.  If one address isn't
+        reachable, then another can be tried."
+    ::= { sipUACfgServerEntry 1 }
+
+sipUACfgServerAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the type of address contained in the
+        associated instance of sipUACfgServerAddress."
+    REFERENCE
+       "INET-ADDRESS-MIB (RFC 4001)"
+    ::= { sipUACfgServerEntry 2 }
+
+sipUACfgServerAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the address of a SIP server this user
+        agent will use to proxy/redirect calls.  The type of this
+        address is determined by the value of the
+        sipUACfgServerAddressType object."
+    REFERENCE "INET-ADDRESS-MIB (RFC 4001)"
+    ::= { sipUACfgServerEntry 3 }
+
+sipUACfgServerRole OBJECT-TYPE
+    SYNTAX      SipTCEntityRole
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object reflects the function of the SIP server this user
+        agent should communicate with: registrar, proxy (outbound
+        proxy), etc."
+    ::= { sipUACfgServerEntry 4 }
+
+--
+-- Conformance
+--
+sipUAMIBCompliances OBJECT IDENTIFIER ::= { sipUAMIBConformance 1 }
+sipUAMIBGroups      OBJECT IDENTIFIER ::= { sipUAMIBConformance 2 }
+
+--
+-- Compliance Statements
+--
+sipUACompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for SIP entities that implement the
+        SIP-UA-MIB module."
+    MODULE -- this module
+        MANDATORY-GROUPS { sipUAConfigGroup }
+    ::= { sipUAMIBCompliances 1 }
+
+--
+-- Units of Conformance
+--
+sipUAConfigGroup OBJECT-GROUP
+    OBJECTS {
+            sipUACfgServerAddressType,
+            sipUACfgServerAddress,
+            sipUACfgServerRole
+    }
+    STATUS  current
+    DESCRIPTION
+       "A collection of objects providing information about the
+        configuration of SIP User Agents."
+    ::= { sipUAMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/SLAPM-MIB.mib b/snmp_builder/mibs/SLAPM-MIB.mib
new file mode 100644
index 0000000..9bbb3e8
--- /dev/null
+++ b/snmp_builder/mibs/SLAPM-MIB.mib
@@ -0,0 +1,2842 @@
+SLAPM-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE,
+      experimental, Integer32, NOTIFICATION-TYPE,
+      Gauge32, Counter32, Unsigned32
+          FROM SNMPv2-SMI                  -- RFC2578
+      TEXTUAL-CONVENTION, RowStatus,
+      TestAndIncr, DateAndTime
+          FROM SNMPv2-TC                   -- RFC2579
+      MODULE-COMPLIANCE, OBJECT-GROUP,
+      NOTIFICATION-GROUP
+          FROM SNMPv2-CONF                 -- RFC2580
+      SnmpAdminString
+          FROM SNMP-FRAMEWORK-MIB;         -- RFC2571
+
+   slapmMIB MODULE-IDENTITY
+      LAST-UPDATED "200001240000Z"          -- 24 January 2000
+      ORGANIZATION "International Business Machines Corp."
+      CONTACT-INFO
+          "Kenneth White
+
+          International Business Machines Corporation
+          Network Computing Software Division
+          Research Triangle Park, NC, USA
+
+          E-mail: wkenneth@us.ibm.com"
+      DESCRIPTION
+          "The Service Level Agreement Performance Monitoring MIB
+          (SLAPM-MIB) provides data collection and monitoring
+          capabilities for Service Level Agreements (SLAs)
+          policy definitions."
+
+      --  Revision history
+
+      REVISION     "200001240000Z"         -- 24 January 2000
+      DESCRIPTION
+          "This version published as RFC 2758."
+      ::= { experimental 88 }
+
+   -- Textual Conventions
+
+   SlapmNameType ::= TEXTUAL-CONVENTION
+      STATUS  deprecated
+      DESCRIPTION
+          "The textual convention for naming entities
+          within this MIB.  The actual contents of an object
+          defined using this textual convention should consist
+          of the distinguished name portion of an name.
+          This is usually the right-most
+          portion of the name.  This convention is necessary,
+          since names within this MIB can be used as index
+          items and an instance identifier is limited to 128
+          subidentifiers.
+
+          This textual convention has been deprecated.  All of the
+          tables defined within this MIB that use this textual
+          convention have been deprecated as well since the method
+          of using a portion of the name (either of a policy
+          definition or of a traffic profile) has been replaced
+          by using an Unsigned32 index.  The new slapmPolicyNameTable
+          would then map the Unsigned32 index to a real name."
+      SYNTAX  SnmpAdminString (SIZE(0..32))
+
+   SlapmStatus ::= TEXTUAL-CONVENTION
+      STATUS  current
+      DESCRIPTION
+          "The textual convention for defining the various
+          slapmPRMonTable (or old slapmPolicyMonitorTable)
+          and the slapmSubcomponentTable states for actual policy
+          rule traffic monitoring."
+      SYNTAX  BITS {
+                     slaMinInRateNotAchieved(0),
+                     slaMaxInRateExceeded(1),
+                     slaMaxDelayExceeded(2),
+                     slaMinOutRateNotAchieved(3),
+                     slaMaxOutRateExceeded(4),
+                     monitorMinInRateNotAchieved(5),
+                     monitorMaxInRateExceeded(6),
+                     monitorMaxDelayExceeded(7),
+                     monitorMinOutRateNotAchieved(8),
+                     monitorMaxOutRateExceeded(9)
+
+                   }
+
+   SlapmPolicyRuleName ::= TEXTUAL-CONVENTION
+      DISPLAY-HINT "1024t"
+      STATUS  current
+      DESCRIPTION
+          "To facilitate internationalization, this TC
+          represents information taken from the ISO/IEC IS
+          10646-1 character set, encoded as an octet string
+          using the UTF-8 character encoding scheme described
+          in RFC 2044.   For strings in 7-bit US-ASCII,
+          there is no impact since the UTF-8 representation
+          is identical to the US-ASCII encoding."
+      SYNTAX  OCTET STRING (SIZE (0..1024))
+
+   -- Top-level structure of the MIB
+
+   slapmNotifications  OBJECT IDENTIFIER ::= { slapmMIB 0 }
+   slapmObjects        OBJECT IDENTIFIER ::= { slapmMIB 1 }
+   slapmConformance    OBJECT IDENTIFIER ::= { slapmMIB 2 }
+
+   -- All scalar objects
+
+   slapmBaseObjects    OBJECT IDENTIFIER ::= { slapmObjects 1 }
+
+   -- Scalar Object Definitions
+
+   slapmSpinLock OBJECT-TYPE
+      SYNTAX      TestAndIncr
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "An advisory lock used to allow cooperating applications
+         to coordinate their use of the contents of this MIB.  This
+         typically occurs when an application seeks to create an
+         new entry or alter an existing entry in
+         slapmPRMonTable (or old slapmPolicyMonitorTable).  A
+         management implementation MAY utilize the slapmSpinLock to
+         serialize its changes or additions.  This usage is not
+         required.   However, slapmSpinLock MUST be supported by
+         agent implementations."
+     ::= { slapmBaseObjects 1 }
+
+   slapmPolicyCountQueries OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The total number of times that a policy lookup occurred
+         with respect to a policy agent.
+         This is the number of times that a reference was made to
+         a policy definition at a system and includes the number
+         of times that a policy repository was accessed,
+         slapmPolicyCountAccesses.  The object
+         slapmPolicyCountAccesses should be less than
+         slapmPolicyCountQueries when policy definitions are
+         cached at a system."
+      ::= { slapmBaseObjects 2 }
+
+   slapmPolicyCountAccesses OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Total number of times that a policy repository was
+          accessed with respect to a policy agent.
+          The value of this object should be less than
+          slapmPolicyCountQueries, since typically policy entries
+          are cached to minimize repository accesses."
+      ::= { slapmBaseObjects 3 }
+
+   slapmPolicyCountSuccessAccesses OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Total number of successful policy repository accesses
+         with respect to a policy agent."
+      ::= { slapmBaseObjects 4 }
+
+   slapmPolicyCountNotFounds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Total number of policy repository accesses,
+         with respect to a policy agent, that
+         resulted in an entry not being located."
+      ::= { slapmBaseObjects 5 }
+
+   slapmPolicyPurgeTime OBJECT-TYPE
+      SYNTAX      Integer32 (0..3600)  -- maximum of 1 hour
+      UNITS       "seconds"
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The purpose of this object is to define the amount
+         of time (in seconds) to wait before removing an
+         slapmPolicyRuleStatsEntry (or old slapmPolicyStatsEntry)
+         when a system detects that the associated policy
+         definition has been deleted.  This gives any polling
+         management applications time to complete their last poll
+         before an entry is removed.  An slapmPolicyRuleStatsEntry
+         (or old slapmPolicyStatsEntry) enters the
+         deleteNeeded(3) state via slapmPolicyRuleStatsOperStatus
+         (or old slapmPolicyStatsOperStatus) when a system first
+         detects that the entry needs to be removed.
+
+         Once slapmPolicyPurgeTime has expired for an entry in
+         deleteNeeded(3) state it is removed a long with any
+         dependent slapmPRMonTable (or slapmPolicyMonitorTable)
+         entries.
+
+         A value of 0 for this option disables this function and
+         results in the automatic purging of slapmPRMonTable
+         (or slapmPolicyTable) entries upon transition into
+         deleteNeeded(3) state.
+
+         A slapmPolicyRuleDeleted (or slapmPolicyProfileDeleted)
+         notification is sent when an slapmPolicyRuleStatsEntry (or
+         slapmPolicyStatsEntry) is removed.  Dependent
+         slapmPRMonTable (or slapmPolicyMonitorTable)
+         deletion results in a slapmPolicyRuleMonDeleted (or
+         slapmPolicyMonitorDeleted) notification being sent.
+         These notifications are suppressed if the value of
+         slapmPolicyTrapEnable is disabled(2)."
+      DEFVAL { 900 }  -- 15 minute default purge time
+      ::= { slapmBaseObjects 6 }
+
+   slapmPolicyTrapEnable OBJECT-TYPE
+      SYNTAX      INTEGER { enabled(1), disabled(2) }
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "Indicates whether slapmPolicyRuleDeleted and
+         slapmPolicyRuleMonDeleted (or slapmPolicyProfileDeleted
+         and slapmPolicyMonitorDeleted) notifications should be
+         generated by this system."
+      DEFVAL { disabled }
+      ::= { slapmBaseObjects 7 }
+
+   slapmPolicyTrapFilter   OBJECT-TYPE
+      SYNTAX      Integer32 (0..64)
+      UNITS       "intervals"
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "The purpose of this object is to suppress unnecessary
+         slapmSubcMonitorNotOkay (or
+         slapmSubcomponentMonitoredEventNotAchieved), for example,
+         notifications.  Basically, a monitored event has to
+         not meet its SLA requirement for the number of
+         consecutive intervals indicated by the value of this
+         object."
+      DEFVAL { 3 }
+      ::= { slapmBaseObjects 8 }
+
+   slapmTableObjects    OBJECT IDENTIFIER ::= { slapmObjects 2 }
+
+   -- Sla Performance Monitoring Policy Statistics Table
+
+   slapmPolicyStatsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF SlapmPolicyStatsEntry
+      MAX-ACCESS not-accessible
+      STATUS deprecated
+      DESCRIPTION
+          "Provides statistics on all policies known at a
+          system.
+
+          This table has been deprecated and replaced with
+          the slapmPolicyRuleStatsTable.  Older implementations of
+          this MIB are expected to continue their support of this
+          table."
+     ::= { slapmTableObjects 1 }
+
+   slapmPolicyStatsEntry OBJECT-TYPE
+      SYNTAX SlapmPolicyStatsEntry
+      MAX-ACCESS not-accessible
+      STATUS deprecated
+      DESCRIPTION
+          "Defines an entry in the slapmPolicyStatsTable.  This table
+          defines a set of statistics that is kept on a per system,
+          policy and traffic profile basis.  A policy can be
+          defined to contain multiple traffic profiles that map to
+          a single action.
+
+          Entries in this table are not created or deleted via SNMP
+          but reflect the set of policy definitions known at a system."
+      INDEX {
+             slapmPolicyStatsSystemAddress,
+             slapmPolicyStatsPolicyName,
+             slapmPolicyStatsTrafficProfileName
+
+            }
+      ::= { slapmPolicyStatsTable 1 }
+
+   SlapmPolicyStatsEntry ::=
+      SEQUENCE {
+          slapmPolicyStatsSystemAddress      OCTET STRING,
+          slapmPolicyStatsPolicyName         SlapmNameType,
+          slapmPolicyStatsTrafficProfileName SlapmNameType,
+          slapmPolicyStatsOperStatus         INTEGER,
+          slapmPolicyStatsActiveConns        Gauge32,
+          slapmPolicyStatsTotalConns         Counter32,
+          slapmPolicyStatsFirstActivated     DateAndTime,
+          slapmPolicyStatsLastMapping        DateAndTime,
+          slapmPolicyStatsInOctets           Counter32,
+          slapmPolicyStatsOutOctets          Counter32,
+          slapmPolicyStatsConnectionLimit    Integer32,
+          slapmPolicyStatsCountAccepts       Counter32,
+          slapmPolicyStatsCountDenies        Counter32,
+          slapmPolicyStatsInDiscards         Counter32,
+          slapmPolicyStatsOutDiscards        Counter32,
+          slapmPolicyStatsInPackets          Counter32,
+          slapmPolicyStatsOutPackets         Counter32,
+          slapmPolicyStatsInProfileOctets    Counter32,
+          slapmPolicyStatsOutProfileOctets   Counter32,
+          slapmPolicyStatsMinRate            Integer32,
+          slapmPolicyStatsMaxRate            Integer32,
+          slapmPolicyStatsMaxDelay           Integer32
+      }
+
+   slapmPolicyStatsSystemAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "Address of a system that an Policy definition relates to.
+         A zero length octet string must be used to indicate that
+         only a single system is being represented.
+         Otherwise, the length of the octet string must be
+         4 for an ipv4 address or 16 for an ipv6 address."
+      ::= { slapmPolicyStatsEntry 1 }
+
+   slapmPolicyStatsPolicyName OBJECT-TYPE
+      SYNTAX      SlapmNameType
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "Policy name that this entry relates to."
+      ::= { slapmPolicyStatsEntry 2 }
+
+   slapmPolicyStatsTrafficProfileName OBJECT-TYPE
+      SYNTAX      SlapmNameType
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "The name of a traffic profile that is associated with
+         a policy."
+      ::= { slapmPolicyStatsEntry 3 }
+
+   slapmPolicyStatsOperStatus OBJECT-TYPE
+      SYNTAX      INTEGER {
+                             inactive(1),
+                             active(2),
+                             deleteNeeded(3)
+                          }
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The state of a policy entry:
+
+           inactive(1)      - An policy entry was either defined
+                              by local system definition or
+                              discovered via a directory search
+                              but has not been activated (not
+                              currently being used).
+           active(2)        - Policy entry is being used to affect
+                              traffic flows.
+           deleteNeeded(3)  - Either though local implementation
+                              dependent methods or by discovering
+                              that the directory entry corresponding
+                              to this table entry no longer
+                              exists and slapmPolicyPurgeTime needs
+                              to expire before attempting to remove
+                              the corresponding slapmPolicyStatsEntry
+                              and any dependent slapmPolicyMonitor
+                              table entries.
+         Note: a policy traffic profile in a state other than
+         active(1) is not being used to affect traffic flows."
+      ::= { slapmPolicyStatsEntry 4 }
+
+   slapmPolicyStatsActiveConns OBJECT-TYPE
+      SYNTAX      Gauge32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The number of active TCP connections that are
+         affected by the corresponding policy entry."
+      ::= { slapmPolicyStatsEntry 5 }
+
+   slapmPolicyStatsTotalConns OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The number of total TCP connections that are
+         affected by the corresponding policy entry."
+      ::= { slapmPolicyStatsEntry 6 }
+
+   slapmPolicyStatsFirstActivated OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The timestamp for when the corresponding policy entry
+         is activated.  The value of this object serves as
+         the discontinuity event indicator when polling entries
+         in this table.  The value of this object is updated on
+         transition of slapmPolicyStatsOperStatus into the active(2)
+         state."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmPolicyStatsEntry 7 }
+
+   slapmPolicyStatsLastMapping OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The timestamp for when the last time
+         that the associated policy entry was used."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmPolicyStatsEntry 8 }
+
+   slapmPolicyStatsInOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The number of octets that was received by IP for an
+         entity that map to this entry."
+      ::= { slapmPolicyStatsEntry 9 }
+
+   slapmPolicyStatsOutOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The number of octets that was transmitted by IP for an
+
+         entity that map to this entry."
+      ::= { slapmPolicyStatsEntry 10 }
+
+   slapmPolicyStatsConnectionLimit OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The limit for the number of active TCP connections that
+         are allowed for this policy definition.  A value of zero
+         for this object implies that a connection limit has not
+         been specified."
+      ::= { slapmPolicyStatsEntry 11 }
+
+   slapmPolicyStatsCountAccepts OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter is incremented when a policy action's
+          Permission value is set to Accept and a session
+          (TCP connection) is accepted."
+      ::= { slapmPolicyStatsEntry 12 }
+
+   slapmPolicyStatsCountDenies OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter is incremented when a policy action's
+          Permission value is set to Deny and a session is denied,
+          or when a session (TCP connection) is rejected due to a
+          policy's connection limit (slapmPolicyStatsConnectLimit)
+          being reached."
+      ::= { slapmPolicyStatsEntry 13 }
+
+   slapmPolicyStatsInDiscards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter counts the number of in octets discarded.
+          This occurs when an error is detected.  Examples of this
+          are buffer overflow, checksum error, or bad packet
+          format."
+      ::= { slapmPolicyStatsEntry 14 }
+
+   slapmPolicyStatsOutDiscards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter counts the number of out octets discarded.
+          Examples of this are buffer overflow, checksum error, or
+          bad packet format."
+      ::= { slapmPolicyStatsEntry 15 }
+
+   slapmPolicyStatsInPackets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter counts the number of in packets received
+          that relate to this policy entry from IP."
+      ::= { slapmPolicyStatsEntry 16 }
+
+   slapmPolicyStatsOutPackets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter counts the number of out packets sent
+          by IP that relate to this policy entry."
+      ::= { slapmPolicyStatsEntry 17 }
+
+   slapmPolicyStatsInProfileOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter counts the number of in octets that are
+          determined to be within profile."
+      ::= { slapmPolicyStatsEntry 18 }
+
+   slapmPolicyStatsOutProfileOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "This counter counts the number of out octets that are
+          determined to be within profile."
+      ::= { slapmPolicyStatsEntry 19 }
+
+   slapmPolicyStatsMinRate OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "Kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The minimum transfer rate defined for this entry."
+      ::= { slapmPolicyStatsEntry 20 }
+
+   slapmPolicyStatsMaxRate OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "Kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The maximum transfer rate defined for this entry."
+      ::= { slapmPolicyStatsEntry 21 }
+
+   slapmPolicyStatsMaxDelay OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The maximum delay defined for this entry."
+      ::= { slapmPolicyStatsEntry 22 }
+
+   -- SLA Performance Monitoring Policy Monitor Table
+
+   slapmPolicyMonitorTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF SlapmPolicyMonitorEntry
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+          "Provides a method of monitoring policies and their
+          effect at a system.
+
+          This table has been deprecated and replaced with
+          the slapmPRMonTable.  Older implementations of
+          this MIB are expected to continue their support
+          of this table."
+     ::= { slapmTableObjects 2 }
+
+   slapmPolicyMonitorEntry OBJECT-TYPE
+      SYNTAX     SlapmPolicyMonitorEntry
+      MAX-ACCESS not-accessible
+      STATUS     deprecated
+      DESCRIPTION
+          "Defines an entry in the slapmPolicyMonitorTable. This
+          table defines which policies should be monitored on a
+          per policy traffic profile basis."
+      INDEX {
+             slapmPolicyMonitorOwnerIndex,
+             slapmPolicyMonitorSystemAddress,
+             slapmPolicyMonitorPolicyName,
+             slapmPolicyMonitorTrafficProfileName
+            }
+      ::= { slapmPolicyMonitorTable 1 }
+
+   SlapmPolicyMonitorEntry ::=
+      SEQUENCE {
+          slapmPolicyMonitorOwnerIndex              SnmpAdminString,
+          slapmPolicyMonitorSystemAddress           OCTET STRING,
+          slapmPolicyMonitorPolicyName              SlapmNameType,
+          slapmPolicyMonitorTrafficProfileName      SlapmNameType,
+          slapmPolicyMonitorControl                 BITS,
+          slapmPolicyMonitorStatus                  SlapmStatus,
+          slapmPolicyMonitorInterval                Integer32,
+          slapmPolicyMonitorIntTime                 DateAndTime,
+          slapmPolicyMonitorCurrentInRate           Gauge32,
+          slapmPolicyMonitorCurrentOutRate          Gauge32,
+          slapmPolicyMonitorMinRateLow              Integer32,
+          slapmPolicyMonitorMinRateHigh             Integer32,
+          slapmPolicyMonitorMaxRateHigh             Integer32,
+          slapmPolicyMonitorMaxRateLow              Integer32,
+          slapmPolicyMonitorMaxDelayHigh            Integer32,
+          slapmPolicyMonitorMaxDelayLow             Integer32,
+          slapmPolicyMonitorMinInRateNotAchieves    Counter32,
+          slapmPolicyMonitorMaxInRateExceeds        Counter32,
+          slapmPolicyMonitorMaxDelayExceeds         Counter32,
+          slapmPolicyMonitorMinOutRateNotAchieves   Counter32,
+          slapmPolicyMonitorMaxOutRateExceeds       Counter32,
+          slapmPolicyMonitorCurrentDelayRate        Gauge32,
+          slapmPolicyMonitorRowStatus               RowStatus
+      }
+
+   slapmPolicyMonitorOwnerIndex OBJECT-TYPE
+      SYNTAX      SnmpAdminString (SIZE(0..16))
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "To facilitate the provisioning of access control by a
+         security administrator using the View-Based Access
+         Control Model (RFC 2575, VACM) for tables in which
+         multiple users may need to independently create or modify
+         entries, the initial index is used as an 'owner index'.
+         Such an initial index has a syntax of SnmpAdminString,
+         and can thus be trivially mapped to a securityName or
+         groupName as defined in VACM, in accordance with a
+
+         security policy.
+
+         All entries in that table belonging to a particular user
+         will have the same value for this initial index.  For a
+         given user's entries in a particular table, the object
+         identifiers for the information in these entries will
+         have the same subidentifiers (except for the 'column'
+         subidentifier) up to the end of the encoded owner index.
+         To configure VACM to permit access to this portion of the
+         table, one would create vacmViewTreeFamilyTable entries
+         with the value of vacmViewTreeFamilySubtree including the
+         owner index portion, and vacmViewTreeFamilyMask
+         'wildcarding' the column subidentifier.  More elaborate
+         configurations are possible."
+      ::= { slapmPolicyMonitorEntry 1 }
+
+   slapmPolicyMonitorSystemAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "Address of a system that an Policy definition relates to.
+         A zero length octet string can be used to indicate that
+         only a single system is being represented.
+         Otherwise, the length of the octet string should be
+         4 for an ipv4 address and 16 for an ipv6 address."
+      ::= { slapmPolicyMonitorEntry 2 }
+
+   slapmPolicyMonitorPolicyName OBJECT-TYPE
+      SYNTAX      SlapmNameType
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "Policy name that this entry relates to."
+      ::= { slapmPolicyMonitorEntry 3 }
+
+   slapmPolicyMonitorTrafficProfileName OBJECT-TYPE
+      SYNTAX      SlapmNameType
+      MAX-ACCESS  not-accessible
+      STATUS      deprecated
+      DESCRIPTION
+         "The corresponding Traffic Profile name."
+      ::= { slapmPolicyMonitorEntry 4 }
+
+   slapmPolicyMonitorControl OBJECT-TYPE
+      SYNTAX      BITS {
+                        monitorMinRate(0),
+                        monitorMaxRate(1),
+                        monitorMaxDelay(2),
+                        enableAggregateTraps(3),
+                        enableSubcomponentTraps(4),
+                        monitorSubcomponents(5)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The value of this object determines the type and level
+         of monitoring that is applied to a policy/profile.  The
+         value of this object can't be changed once the table
+         entry that it is a part of is activated via a
+         slapmPolicyMonitorRowStatus transition to active state.
+
+             monitorMinRate(0) - Monitor minimum transfer rate.
+             monitorMaxRate(1) - Monitor maximum transfer rate.
+             monitorMaxDelay(2) - Monitor maximum delay.
+             enableAggregateTraps(3) - The enableAggregateTraps(3)
+                   BITS setting enables notification generation
+                   when monitoring a policy traffic profile as an
+                   aggregate using the values in the corresponding
+                   slapmPolicyStatsEntry.  By default this function
+                   is not enabled.
+             enableSubcomponentTraps(4) - This BITS setting enables
+                   notification generation when monitoring all
+                   subcomponents that are mapped to an corresponding
+                   slapmPolicyStatsEntry.  By default this
+                   function is not enabled.
+             monitorSubcomponents(5) - This BITS setting enables
+                   monitoring of each subcomponent (typically a
+                   TCP connection or UDP listener) individually."
+      DEFVAL   { { monitorMinRate, monitorMaxRate,
+                   monitorMaxDelay } }
+      ::= { slapmPolicyMonitorEntry 5 }
+
+   slapmPolicyMonitorStatus OBJECT-TYPE
+      SYNTAX      SlapmStatus
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The value of this object indicates when a monitored
+         value has not meet a threshold or isn't meeting the
+         defined service level.  The SlapmStatus TEXTUAL-CONVENTION
+         defines two levels of not meeting a threshold.  The first
+         set:
+                     slaMinInRateNotAchieved(0),
+                     slaMaxInRateExceeded(1),
+                     slaMaxDelayExceeded(2),
+                     slaMinOutRateNotAchieved(3),
+                     slaMaxOutRateExceeded(4)
+
+         are used to indicate when the SLA as an aggregate is
+         not meeting a threshold while the second set:
+
+                     monitorMinInRateNotAchieved(5),
+                     monitorMaxInRateExceeded(6),
+                     monitorMaxDelayExceeded(7),
+                     monitorMinOutRateNotAchieved(8),
+                     monitorMaxOutRateExceeded(9)
+
+         indicate that at least one subcomponent is not meeting
+         a threshold."
+      ::= { slapmPolicyMonitorEntry 6 }
+
+   slapmPolicyMonitorInterval OBJECT-TYPE
+      SYNTAX      Integer32 (15..86400) -- 15 second min, 24 hour max
+      UNITS       "seconds"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The number of seconds that defines the sample period."
+      DEFVAL   {20}    -- 20 seconds
+      ::= { slapmPolicyMonitorEntry 7 }
+
+   slapmPolicyMonitorIntTime OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The timestamp for when the last interval ended."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmPolicyMonitorEntry 8 }
+
+   slapmPolicyMonitorCurrentInRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "Using the value of the corresponding
+         slapmPolicyMonitorInterval, slapmPolicyStatsInOctets
+         is sampled and then divided by slapmPolicyMonitorInterval
+         to determine the current in transfer rate."
+      ::= { slapmPolicyMonitorEntry 9 }
+
+   slapmPolicyMonitorCurrentOutRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "Using the value of the corresponding
+         slapmPolicyMonitorInterval, slapmPolicyStatsOutOctets
+         is sampled and then divided by slapmPolicyMonitorInterval
+         to determine the current out transfer rate."
+      ::= { slapmPolicyMonitorEntry 10 }
+
+   slapmPolicyMonitorMinRateLow OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The threshold for generating a
+         slapmMonitoredEventNotAchieved notification, signalling
+         that a monitored minimum transfer rate has not been meet.
+
+         A slapmMonitoredEventNotAchieved notification is not
+         generated again for an slapmPolicyMonitorEntry until
+         the minimum transfer rate
+         exceeds slapmPolicyMonitorMinRateHigh (a
+         slapmMonitoredEventOkay notification is then transmitted)
+         and then fails below slapmPolicyMonitorMinRateLow.  This
+         behavior reduces the slapmMonitoredEventNotAchieved
+         notifications that are transmitted.
+
+         A value of zero for this object is returned when the
+         slapmPolicyMonitorControl monitorMinRate(0) is not
+         enabled.  When enabled the default value for this object
+         is the min rate value specified in the associated
+         action definition minus 10%.  If the action definition
+         doesn't have a min rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMinRate(0)
+         is selected.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be selected in
+         order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPolicyMonitorEntry 11 }
+
+   slapmPolicyMonitorMinRateHigh OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The threshold for generating a slapmMonitoredEventOkay
+         notification, signalling that a monitored minimum
+         transfer rate has increased to an acceptable level.
+
+         A value of zero for this object is returned when the
+         slapmPolicyMonitorControl monitorMinRate(0) is not
+         enabled.  When enabled the default value for this object
+         is the min rate value specified in the associated
+         action definition plus 10%.  If the action definition
+         doesn't have a min rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMinRate(0)
+         is selected.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be selected
+         in order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPolicyMonitorEntry 12 }
+
+   slapmPolicyMonitorMaxRateHigh OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The threshold for generating a
+         slapmMonitoredEventNotAchieved notification, signalling
+         that a monitored maximum transfer rate has been exceeded.
+
+         A slapmMonitoredEventNotAchieved notification is not
+         generated again for an slapmPolicyMonitorEntry until the
+         maximum transfer rate fails below
+         slapmPolicyMonitorMaxRateLow (a slapmMonitoredEventOkay
+         notification is then transmitted) and then raises above
+         slapmPolicyMonitorMaxRateHigh.  This behavior reduces the
+         slapmMonitoredEventNotAchieved notifications that are
+         transmitted.
+
+         A value of zero for this object is returned when the
+         slapmPolicyMonitorControl monitorMaxRate(1) is not
+         enabled.  When enabled the default value for this object
+         is the max rate value specified in the associated
+         action definition plus 10%.  If the action definition
+
+         doesn't have a max rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxRate(1)
+         is selected.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be selected in
+         order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPolicyMonitorEntry 13 }
+
+   slapmPolicyMonitorMaxRateLow OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The threshold for generating a slapmMonitoredEventOkay
+         notification, signalling that a monitored maximum
+         transfer rate has fallen to an acceptable level.
+
+         A value of zero for this object is returned when the
+         slapmPolicyMonitorControl monitorMaxRate(1) is not
+         enabled.  When enabled the default value for this object
+         is the max rate value specified in the associated
+         action definition minus 10%.  If the action definition
+         doesn't have a max rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxRate(1)
+         is selected.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be selected in
+         order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPolicyMonitorEntry 14 }
+
+   slapmPolicyMonitorMaxDelayHigh OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The threshold for generating a
+         slapmMonitoredEventNotAchieved notification, signalling
+         that a monitored maximum delay rate has been exceeded.
+
+         A slapmMonitoredEventNotAchieved notification is not
+
+         generated again for an slapmPolicyMonitorEntry until
+         the maximum delay rate falls below
+         slapmPolicyMonitorMaxDelayLow (a slapmMonitoredEventOkay
+         notification is then transmitted) and raises above
+         slapmPolicyMonitorMaxDelayHigh.  This behavior reduces
+         the slapmMonitoredEventNotAchieved notifications that are
+         transmitted.
+
+         A value of zero for this object is returned when the
+         slapmPolicyMonitorControl monitorMaxDelay(4) is not
+         enabled.  When enabled the default value for this object
+         is the max delay value specified in the associated
+         action definition plus 10%.  If the action definition
+         doesn't have a max delay defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxDelay(4)
+         is selected.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be selected
+         in order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPolicyMonitorEntry 15 }
+
+   slapmPolicyMonitorMaxDelayLow OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      deprecated
+      DESCRIPTION
+         "The threshold for generating a slapmMonitoredEventOkay
+         notification, signalling that a monitored maximum delay
+         rate has fallen to an acceptable level.
+
+         A value of zero for this object is returned when the
+         slapmPolicyMonitorControl monitorMaxDelay(4) is not
+         enabled.  When enabled the default value for this object
+         is the max delay value specified in the associated
+         action definition minus 10%.  If the action definition
+         doesn't have a max delay defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxDelay(4)
+         is selected.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be selected
+         in order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPolicyMonitorEntry 16 }
+
+   slapmPolicyMonitorMinInRateNotAchieves OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The number of times that a minimum transfer in rate
+          was not achieved."
+      ::= { slapmPolicyMonitorEntry 17 }
+
+   slapmPolicyMonitorMaxInRateExceeds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The number of times that a maximum transfer in rate
+          was exceeded."
+      ::= { slapmPolicyMonitorEntry 18 }
+
+   slapmPolicyMonitorMaxDelayExceeds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The number of times that a maximum delay in rate
+          was exceeded."
+      ::= { slapmPolicyMonitorEntry 19 }
+
+   slapmPolicyMonitorMinOutRateNotAchieves OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The number of times that a minimum transfer out rate
+          was not achieved."
+      ::= { slapmPolicyMonitorEntry 20 }
+
+   slapmPolicyMonitorMaxOutRateExceeds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The number of times that a maximum transfer out rate
+          was exceeded."
+      ::= { slapmPolicyMonitorEntry 21 }
+
+   slapmPolicyMonitorCurrentDelayRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+          "The current delay rate for this entry.  This is
+          calculated by taking the average of the TCP
+          round trip times for all associating
+          slapmSubcomponentTable entries within a interval."
+      ::= { slapmPolicyMonitorEntry 22 }
+
+   slapmPolicyMonitorRowStatus  OBJECT-TYPE
+      SYNTAX       RowStatus
+      MAX-ACCESS   read-create
+      STATUS       deprecated
+      DESCRIPTION
+        "This object allows entries to be created and deleted
+         in the slapmPolicyMonitorTable.  An entry in this table
+         is deleted by setting this object to destroy(6).
+
+         Removal of a corresponding (same policy and traffic profile
+         names) slapmPolicyStatsEntry has the side effect of the
+         automatic deletion an entry in this table."
+      ::= { slapmPolicyMonitorEntry 23 }
+
+   -- Subcomponent Table
+
+   slapmSubcomponentTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF SlapmSubcomponentEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+            "Defines a table to provide information on the
+            individually components that are mapped to
+            a policy rule (or old traffic profile).
+
+            The indexing for this table is designed to support
+            the use of an SNMP GET-NEXT operation using only
+            the remote address and remote port as a way for
+            a management station to retrieve the table entries
+            relating to a particular client."
+       ::= { slapmTableObjects 3 }
+
+   slapmSubcomponentEntry OBJECT-TYPE
+       SYNTAX      SlapmSubcomponentEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+            "Describes a particular subcomponent entry.  This
+            table does not have an OwnerIndex as
+            part of its indexing since this table's contents
+            is intended to span multiple users."
+       INDEX {
+               slapmSubcomponentRemAddress,
+               slapmSubcomponentRemPort,
+               slapmSubcomponentLocalAddress,
+               slapmSubcomponentLocalPort
+             }
+       ::= { slapmSubcomponentTable 1 }
+
+   SlapmSubcomponentEntry ::=
+       SEQUENCE {
+            slapmSubcomponentRemAddress            OCTET STRING,
+            slapmSubcomponentRemPort               Integer32,
+            slapmSubcomponentLocalAddress          OCTET STRING,
+            slapmSubcomponentLocalPort             Integer32,
+            slapmSubcomponentProtocol              INTEGER,
+            slapmSubcomponentSystemAddress         OCTET STRING,
+            slapmSubcomponentPolicyName            SlapmNameType,
+            slapmSubcomponentTrafficProfileName    SlapmNameType,
+            slapmSubcomponentLastActivity          DateAndTime,
+            slapmSubcomponentInOctets              Counter32,
+            slapmSubcomponentOutOctets             Counter32,
+            slapmSubcomponentTcpOutBufferedOctets  Counter32,
+            slapmSubcomponentTcpInBufferedOctets   Counter32,
+            slapmSubcomponentTcpReXmts             Counter32,
+            slapmSubcomponentTcpRoundTripTime      Integer32,
+            slapmSubcomponentTcpRoundTripVariance  Integer32,
+            slapmSubcomponentInPdus                Counter32,
+            slapmSubcomponentOutPdus               Counter32,
+            slapmSubcomponentApplName              SnmpAdminString,
+            slapmSubcomponentMonitorStatus         SlapmStatus,
+            slapmSubcomponentMonitorIntTime        DateAndTime,
+            slapmSubcomponentMonitorCurrentInRate  Gauge32,
+            slapmSubcomponentMonitorCurrentOutRate Gauge32,
+            slapmSubcomponentPolicyRuleIndex       Unsigned32
+         }
+
+   slapmSubcomponentRemAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "Indicate the remote address of a subcomponent.
+         A remote address can be either an ipv4 address in which
+         case 4 octets are required or as an ipv6 address that
+
+         requires 16 octets.  The value of this subidentifier
+         is a zero length octet string when this entry relates
+         to a UDP listener."
+      ::= { slapmSubcomponentEntry 1 }
+
+   slapmSubcomponentRemPort OBJECT-TYPE
+      SYNTAX      Integer32(0..65535)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "Indicate the remote port of a subcomponent.
+         The value of this subidentifier
+         is 0 when this entry relates to a UDP listener."
+      ::= { slapmSubcomponentEntry 2 }
+
+   slapmSubcomponentLocalAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(4 | 16))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "Indicate the local address of a subcomponent.
+         A local address can be either an ipv4 address in which
+         case 4 octets are required or as an ipv6 address that
+         requires 16 octets."
+      ::= { slapmSubcomponentEntry 3 }
+
+   slapmSubcomponentLocalPort OBJECT-TYPE
+      SYNTAX      Integer32(0..65535)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "Indicate the local port of a subcomponent."
+      ::= { slapmSubcomponentEntry 4 }
+
+   slapmSubcomponentProtocol OBJECT-TYPE
+      SYNTAX      INTEGER {
+                             udpListener(1),
+                             tcpConnection(2)
+                          }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Indicate the protocol in use that identifies the
+         type of subcomponent."
+      ::= { slapmSubcomponentEntry 5 }
+
+   slapmSubcomponentSystemAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Address of a system that an Policy definition relates to.
+         A zero length octet string can be used to indicate that
+         only a single system is being represented.
+         Otherwise, the length of the octet string should be
+         4 for an ipv4 address and 16 for an ipv6 address."
+      ::= { slapmSubcomponentEntry 6 }
+
+   slapmSubcomponentPolicyName OBJECT-TYPE
+      SYNTAX      SlapmNameType
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "Policy name that this entry relates to.
+
+         This object, along with slapmSubcomponentTrafficProfileName,
+         have been replaced with the use of an unsigned integer
+         index that is mapped to an slapmPolicyNameEntry to actually
+         identify policy naming."
+      ::= { slapmSubcomponentEntry 7 }
+
+   slapmSubcomponentTrafficProfileName OBJECT-TYPE
+      SYNTAX      SlapmNameType
+      MAX-ACCESS  read-only
+      STATUS      deprecated
+      DESCRIPTION
+         "The corresponding traffic profile name.
+
+         This object, along with slapmSubcomponentProfileName,
+         have been replaced with the use of an unsigned integer
+         index that is mapped to an slapmPolicyNameEntry to
+         actually identify policy naming."
+      ::= { slapmSubcomponentEntry 8 }
+
+  slapmSubcomponentLastActivity OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The date and timestamp of when this entry was last used."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmSubcomponentEntry 9 }
+
+   slapmSubcomponentInOctets OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The number of octets received from IP for this
+           connection."
+       ::= { slapmSubcomponentEntry 10 }
+
+   slapmSubcomponentOutOctets OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The number of octets sent to IP for this connection."
+       ::= { slapmSubcomponentEntry 11 }
+
+   slapmSubcomponentTcpOutBufferedOctets OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "Number of outgoing octets buffered.  The value
+           of this object is zero when the entry is not
+           for a TCP connection."
+       ::= { slapmSubcomponentEntry 12 }
+
+   slapmSubcomponentTcpInBufferedOctets OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "Number of incoming octets buffered.  The value
+           of this object is zero when the entry is not
+           for a TCP connection."
+       ::= { slapmSubcomponentEntry 13 }
+
+   slapmSubcomponentTcpReXmts OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "Number of retransmissions.  The value
+           of this object is zero when the entry is not
+           for a TCP connection."
+       ::= { slapmSubcomponentEntry 14 }
+
+   slapmSubcomponentTcpRoundTripTime OBJECT-TYPE
+       SYNTAX       Integer32
+       UNITS        "milliseconds"
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The amount of time that has elapsed, measured in
+           milliseconds, from when the last TCP segment was
+           transmitted by the TCP Stack until the ACK was
+           received.
+
+           The value of this object is zero when the entry is not
+           for a TCP connection."
+       ::= { slapmSubcomponentEntry 15 }
+
+   slapmSubcomponentTcpRoundTripVariance OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "Round trip time variance.
+
+           The value of this object is zero when the entry is not
+           for a TCP connection."
+       ::= { slapmSubcomponentEntry 16 }
+
+   slapmSubcomponentInPdus OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The number of protocol related data units transferred
+           inbound:
+
+             slapmSubcomponentProtocol    PDU Type
+
+                  udpListener(1)          UDP datagrams
+                  tcpConnection(2)        TCP segments"
+       ::= { slapmSubcomponentEntry 17 }
+
+   slapmSubcomponentOutPdus OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The number of protocol related data units transferred
+           outbound:
+
+             slapmSubcomponentProtocol    PDU Type
+
+                  udpListener(1)          UDP datagrams
+
+                  tcpConnection(2)        TCP segments"
+       ::= { slapmSubcomponentEntry 18 }
+
+   slapmSubcomponentApplName OBJECT-TYPE
+       SYNTAX       SnmpAdminString (SIZE(0..32))
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The application name associated with this entry if known,
+           otherwise a zero-length octet string is returned as the
+           value of this object."
+       ::= { slapmSubcomponentEntry 19 }
+
+   slapmSubcomponentMonitorStatus OBJECT-TYPE
+      SYNTAX      SlapmStatus
+      MAX-ACCESS  read-only
+      STATUS       current
+      DESCRIPTION
+         "The value of this object indicates when a monitored
+         value has exceeded a threshold or isn't meeting the
+         defined service level.  Only the following SlapmStatus
+         BITS setting can be reported here:
+
+                     monitorMinInRateNotAchieved(5),
+                     monitorMaxInRateExceeded(6),
+                     monitorMaxDelayExceeded(7),
+                     monitorMinOutRateNotAchieved(8),
+                     monitorMaxOutRateExceeded(9)
+
+         This object only has meaning when an corresponding
+         slapmPolicyMonitorEntry exists with the
+         slapmPolicyMonitorControl BITS setting
+         monitorSubcomponents(5) enabled."
+      ::= { slapmSubcomponentEntry 20 }
+
+   slapmSubcomponentMonitorIntTime OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The timestamp for when the last interval ended.
+
+         This object only has meaning when an corresponding
+         slapmPRMonEntry (or old slapmPolicyMonitorEntry)
+         exists with the slapmPRMonControl (or
+         slapmPolicyMonitorControl) BITS setting
+         monitorSubcomponents(5) enabled.  All of the
+         octets returned when monitoring is not in effect
+
+         must be zero."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmSubcomponentEntry 21 }
+
+   slapmSubcomponentMonitorCurrentInRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Using the value of the corresponding
+         slapmPRMonInterval (or slapmPolicyMonitorInterval),
+         slapmSubcomponentStatsInOctets
+         is divided by slapmSubcomponentMonitorInterval to determine
+         the current in transfer rate.
+
+         This object only has meaning when an corresponding
+         slapmPRMonEntry (or slapmPolicyMonitorEntry)
+         exists with the slapmPRMonControl (or
+         slapmPolicyMonitorControl) BITS setting
+         monitorSubcomponents(5) enabled.  The value of this
+         object is zero when monitoring is not in effect."
+      ::= { slapmSubcomponentEntry 22 }
+
+   slapmSubcomponentMonitorCurrentOutRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Using the value of the corresponding slapmPRMonInterval (or
+         slapmPolicyMonitorInterva)l, slapmSubcomponentStatsOutOctets
+         is divided by slapmPRMonInterval (or
+         slapmPolicyMonitorInterval) to determine the
+         current out transfer rate.
+
+         This object only has meaning when an corresponding
+         slapmPRMonEntry (or slapmPolicyMonitorEntry) exists with
+         the slapmPRMonControl (or slapmPolicyMonitorControl)
+         BITS setting monitorSubcomponents(5) enabled.  The value
+         of this object is zero when monitoring is not in effect."
+      ::= { slapmSubcomponentEntry 23 }
+
+  slapmSubcomponentPolicyRuleIndex OBJECT-TYPE
+     SYNTAX      Unsigned32 (0..4294967295)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+        "Points to an slapmPolicyNameEntry when combined with
+        slapmSubcomponentSystemAddress to indicate the
+        policy naming that relates to this entry.
+
+        A value of 0 for this object MUST be returned when
+        the corresponding slapmSubcomponentEntry has no
+        policy rule associated with it."
+     ::= { slapmSubcomponentEntry 24 }
+
+   -- Table that maps an unsigned integer index to whatever
+   -- names a policy rule.
+
+   slapmPolicyNameTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF SlapmPolicyNameEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Provides the mapping between a policy index as a
+          unsigned 32 bit integer and the unique name associated
+          with a policy rule."
+     ::= { slapmTableObjects 4 }
+
+   slapmPolicyNameEntry OBJECT-TYPE
+      SYNTAX SlapmPolicyNameEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Defines an entry in the slapmPolicyNameTable."
+      INDEX {
+             slapmPolicyNameSystemAddress,
+             slapmPolicyNameIndex
+            }
+      ::= { slapmPolicyNameTable 1 }
+
+   SlapmPolicyNameEntry ::=
+      SEQUENCE {
+          slapmPolicyNameSystemAddress   OCTET STRING,
+          slapmPolicyNameIndex           Unsigned32,
+          slapmPolicyNameOfRule          SlapmPolicyRuleName
+      }
+
+   slapmPolicyNameSystemAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "Address of a system that an Policy rule definition relates
+         to.  A zero length octet string must be used to indicate
+
+         that only a single system is being represented.
+         Otherwise, the length of the octet string must be
+         4 for an ipv4 address or 16 for an ipv6 address."
+      ::= { slapmPolicyNameEntry 1 }
+
+   slapmPolicyNameIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..4294967295)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "A locally arbitrary, but unique identifier associated
+          with this table entry.  This value is not expected to
+          remain constant across reIPLs."
+      ::= { slapmPolicyNameEntry 2 }
+
+   slapmPolicyNameOfRule OBJECT-TYPE
+      SYNTAX      SlapmPolicyRuleName
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The unique name that identifies a policy rule definition."
+      ::= { slapmPolicyNameEntry 3 }
+
+   -- Sla Performance Monitoring Policy Rule Statistics Table
+
+   slapmPolicyRuleStatsTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF SlapmPolicyRuleStatsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Provides statistics on a per system and a per policy
+          rule basis."
+     ::= { slapmTableObjects 5 }
+
+   slapmPolicyRuleStatsEntry OBJECT-TYPE
+      SYNTAX SlapmPolicyRuleStatsEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Defines an entry in the slapmPolicyRuleStatsTable.
+          This table defines a set of statistics that is kept
+          on a per system and per policy rule basis.
+
+          Entries in this table are not created or deleted via SNMP
+          but reflect the set of policy rule definitions known
+          at a system."
+      INDEX {
+             slapmPolicyNameSystemAddress,
+             slapmPolicyNameIndex
+            }
+      ::= { slapmPolicyRuleStatsTable 1 }
+
+   SlapmPolicyRuleStatsEntry ::=
+      SEQUENCE {
+          slapmPolicyRuleStatsOperStatus     INTEGER,
+          slapmPolicyRuleStatsActiveConns    Gauge32,
+          slapmPolicyRuleStatsTotalConns     Counter32,
+          slapmPolicyRuleStatsLActivated     DateAndTime,
+          slapmPolicyRuleStatsLastMapping    DateAndTime,
+          slapmPolicyRuleStatsInOctets       Counter32,
+          slapmPolicyRuleStatsOutOctets      Counter32,
+          slapmPolicyRuleStatsConnLimit      Unsigned32,
+          slapmPolicyRuleStatsCountAccepts   Counter32,
+          slapmPolicyRuleStatsCountDenies    Counter32,
+          slapmPolicyRuleStatsInDiscards     Counter32,
+          slapmPolicyRuleStatsOutDiscards    Counter32,
+          slapmPolicyRuleStatsInPackets      Counter32,
+          slapmPolicyRuleStatsOutPackets     Counter32,
+          slapmPolicyRuleStatsInProOctets    Counter32,
+          slapmPolicyRuleStatsOutProOctets   Counter32,
+          slapmPolicyRuleStatsMinRate        Unsigned32,
+          slapmPolicyRuleStatsMaxRate        Unsigned32,
+          slapmPolicyRuleStatsMaxDelay       Unsigned32,
+          slapmPolicyRuleStatsTotalRsvpFlows Counter32,
+          slapmPolicyRuleStatsActRsvpFlows   Gauge32
+      }
+
+   slapmPolicyRuleStatsOperStatus OBJECT-TYPE
+      SYNTAX      INTEGER {
+                             inactive(1),
+                             active(2),
+                             deleteNeeded(3)
+                          }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The state of a policy entry:
+
+           inactive(1)      - An policy entry was either defined
+                              by local system definition or
+                              discovered via
+                              a directory search but has not been
+                              activated (not currently being used).
+           active(2)        - Policy entry is being used to affect
+                              traffic flows.
+           deleteNeeded(3)  - Either though local implementation
+
+                              dependent methods or by discovering
+                              that the directory entry corresponding
+                              to this table entry no longer
+                              exists and slapmPolicyPurgeTime needs
+                              to expire before attempting to remove
+                              the corresponding slapmPolicyStatsEntry
+                              and any dependent slapmPolicyMonitor
+                              table entries.
+         Note: a policy rule in a state other than
+         active(2) is not being used to affect traffic flows."
+      ::= { slapmPolicyRuleStatsEntry 1 }
+
+   slapmPolicyRuleStatsActiveConns OBJECT-TYPE
+      SYNTAX      Gauge32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of active TCP connections that are
+         affected by the corresponding policy entry."
+      ::= { slapmPolicyRuleStatsEntry 2 }
+
+   slapmPolicyRuleStatsTotalConns OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of total TCP connections that are
+         affected by the corresponding policy entry."
+      ::= { slapmPolicyRuleStatsEntry 3 }
+
+   slapmPolicyRuleStatsLActivated OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The timestamp for when the corresponding policy entry
+         was last activated.  The value of this object serves as
+         the discontinuity event indicator when polling entries
+         in this table.  The value of this object is updated on
+         transition of slapmPolicyRuleStatsOperStatus into the
+         active(2) state."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmPolicyRuleStatsEntry 4 }
+
+   slapmPolicyRuleStatsLastMapping OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The timestamp for when the last time
+         that the associated policy entry was used."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmPolicyRuleStatsEntry 5 }
+
+   slapmPolicyRuleStatsInOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of octets that was received by IP for an
+         entity that map to this entry."
+      ::= { slapmPolicyRuleStatsEntry 6 }
+
+   slapmPolicyRuleStatsOutOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The number of octets that was transmitted by IP for an
+         entity that map to this entry."
+      ::= { slapmPolicyRuleStatsEntry 7 }
+
+   slapmPolicyRuleStatsConnLimit OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The limit for the number of active TCP connections that
+         are allowed for this policy definition.  A value of zero
+         for this object implies that a connection limit has not
+         been specified."
+      ::= { slapmPolicyRuleStatsEntry 8 }
+
+   slapmPolicyRuleStatsCountAccepts OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter is incremented when a policy action's
+          Permission value is set to Accept and a session
+          (TCP connection) is accepted."
+      ::= { slapmPolicyRuleStatsEntry 9 }
+
+   slapmPolicyRuleStatsCountDenies OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter is incremented when a policy action's
+          Permission value is set to Deny and a session is denied,
+          or when a session (TCP connection) is rejected due to a
+          policy's connection limit (slapmPolicyRuleStatsConnectLimit)
+          being reached."
+      ::= { slapmPolicyRuleStatsEntry 10 }
+
+   slapmPolicyRuleStatsInDiscards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter counts the number of in octets discarded.
+          This occurs when an error is detected.  Examples of this
+          are buffer overflow, checksum error, or bad packet
+          format."
+      ::= { slapmPolicyRuleStatsEntry 11 }
+
+   slapmPolicyRuleStatsOutDiscards OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter counts the number of out octets discarded.
+          Examples of this are buffer overflow, checksum error, or
+          bad packet format."
+      ::= { slapmPolicyRuleStatsEntry 12 }
+
+   slapmPolicyRuleStatsInPackets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter counts the number of in packets received
+          that relate to this policy entry from IP."
+      ::= { slapmPolicyRuleStatsEntry 13 }
+
+   slapmPolicyRuleStatsOutPackets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter counts the number of out packets sent
+          by IP that relate to this policy entry."
+      ::= { slapmPolicyRuleStatsEntry 14 }
+
+   slapmPolicyRuleStatsInProOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter counts the number of in octets that are
+          determined to be within profile."
+      ::= { slapmPolicyRuleStatsEntry 15 }
+
+   slapmPolicyRuleStatsOutProOctets OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "This counter counts the number of out octets that are
+          determined to be within profile."
+      ::= { slapmPolicyRuleStatsEntry 16 }
+
+   slapmPolicyRuleStatsMinRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "Kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The minimum transfer rate defined for this entry."
+      ::= { slapmPolicyRuleStatsEntry 17 }
+
+   slapmPolicyRuleStatsMaxRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "Kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The maximum transfer rate defined for this entry."
+      ::= { slapmPolicyRuleStatsEntry 18 }
+
+   slapmPolicyRuleStatsMaxDelay OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The maximum delay defined for this entry."
+      ::= { slapmPolicyRuleStatsEntry 19 }
+
+   slapmPolicyRuleStatsTotalRsvpFlows OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Total number of RSVP flows that have be activated."
+      ::= { slapmPolicyRuleStatsEntry 20 }
+
+   slapmPolicyRuleStatsActRsvpFlows OBJECT-TYPE
+      SYNTAX      Gauge32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Current number of active RSVP flows."
+      ::= { slapmPolicyRuleStatsEntry 21 }
+
+   -- SLA Performance Monitoring Policy Rule Monitor Table
+
+   slapmPRMonTable OBJECT-TYPE
+      SYNTAX SEQUENCE OF SlapmPRMonEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Provides a method of monitoring policies and their
+          effect at a system."
+     ::= { slapmTableObjects 6 }
+
+   slapmPRMonEntry OBJECT-TYPE
+      SYNTAX SlapmPRMonEntry
+      MAX-ACCESS not-accessible
+      STATUS current
+      DESCRIPTION
+          "Defines an entry in the slapmPRMonTable. This
+          table defines which policies should be monitored on a
+          per policy rule basis.
+
+          An attempt to set any read-create object defined within an
+          slapmPRMonEntry while the value of slapmPRMonRowStatus is
+          active(1) will result in an inconsistentValue error."
+      INDEX {
+             slapmPRMonOwnerIndex,
+             slapmPRMonSystemAddress,
+             slapmPRMonIndex
+            }
+      ::= { slapmPRMonTable 1 }
+
+   SlapmPRMonEntry ::=
+      SEQUENCE {
+          slapmPRMonOwnerIndex              SnmpAdminString,
+          slapmPRMonSystemAddress           OCTET STRING,
+          slapmPRMonIndex                   Unsigned32,
+          slapmPRMonControl                 BITS,
+          slapmPRMonStatus                  SlapmStatus,
+          slapmPRMonInterval                Unsigned32,
+          slapmPRMonIntTime                 DateAndTime,
+          slapmPRMonCurrentInRate           Gauge32,
+          slapmPRMonCurrentOutRate          Gauge32,
+          slapmPRMonMinRateLow              Unsigned32,
+          slapmPRMonMinRateHigh             Unsigned32,
+          slapmPRMonMaxRateHigh             Unsigned32,
+          slapmPRMonMaxRateLow              Unsigned32,
+          slapmPRMonMaxDelayHigh            Unsigned32,
+          slapmPRMonMaxDelayLow             Unsigned32,
+          slapmPRMonMinInRateNotAchieves    Counter32,
+          slapmPRMonMaxInRateExceeds        Counter32,
+          slapmPRMonMaxDelayExceeds         Counter32,
+          slapmPRMonMinOutRateNotAchieves   Counter32,
+          slapmPRMonMaxOutRateExceeds       Counter32,
+          slapmPRMonCurrentDelayRate        Gauge32,
+          slapmPRMonRowStatus               RowStatus
+      }
+
+   slapmPRMonOwnerIndex OBJECT-TYPE
+      SYNTAX      SnmpAdminString (SIZE(0..16))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "To facilitate the provisioning of access control by a
+         security administrator using the View-Based Access
+         Control Model (RFC 2575, VACM) for tables in which
+         multiple users may need to independently create or modify
+         entries, the initial index is used as an 'owner index'.
+         Such an initial index has a syntax of SnmpAdminString,
+         and can thus be trivially mapped to a securityName or
+         groupName as defined in VACM, in accordance with a
+         security policy.
+
+         All entries in that table belonging to a particular user
+         will have the same value for this initial index.  For a
+         given user's entries in a particular table, the object
+         identifiers for the information in these entries will
+         have the same subidentifiers (except for the 'column'
+         subidentifier) up to the end of the encoded owner index.
+         To configure VACM to permit access to this portion of the
+         table, one would create vacmViewTreeFamilyTable entries
+         with the value of vacmViewTreeFamilySubtree including the
+         owner index portion, and vacmViewTreeFamilyMask
+         'wildcarding' the column subidentifier.  More elaborate
+         configurations are possible."
+      ::= { slapmPRMonEntry 1 }
+
+   slapmPRMonSystemAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "Address of a system that an Policy definition relates to.
+         A zero length octet string can be used to indicate that
+         only a single system is being represented.
+         Otherwise, the length of the octet string should be
+         4 for an ipv4 address and 16 for an ipv6 address."
+      ::= { slapmPRMonEntry 2 }
+
+   slapmPRMonIndex OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+         "An slapmPolicyNameTable index, slapmPolicyNameIndex,
+         that points to the unique name associated with a
+         policy rule definition."
+      ::= { slapmPRMonEntry 3 }
+
+   slapmPRMonControl OBJECT-TYPE
+      SYNTAX      BITS {
+                        monitorMinRate(0),
+                        monitorMaxRate(1),
+                        monitorMaxDelay(2),
+                        enableAggregateTraps(3),
+                        enableSubcomponentTraps(4),
+                        monitorSubcomponents(5)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The value of this object determines the type and level
+         of monitoring that is applied to a policy rule.  The
+         value of this object can't be changed once the table
+         entry that it is a part of is activated via a
+         slapmPRMonRowStatus transition to active state.
+
+             monitorMinRate(0) - Monitor minimum transfer rate.
+             monitorMaxRate(1) - Monitor maximum transfer rate.
+             monitorMaxDelay(2) - Monitor maximum delay.
+             enableAggregateTraps(3) - The enableAggregateTraps(3)
+                   BITS setting enables notification generation
+                   when monitoring a policy rule as an
+
+                   aggregate using the values in the corresponding
+                   slapmPRMonStatsEntry.  By default this function
+                   is not enabled.
+             enableSubcomponentTraps(4) - This BITS setting enables
+                   notification generation when monitoring all
+                   subcomponents that are mapped to an corresponding
+                   slapmPRMonStatsEntry.  By default this
+                   function is not enabled.
+             monitorSubcomponents(5) - This BITS setting enables
+                   monitoring of each subcomponent (typically a
+                   TCP connection or UDP listener) individually."
+      DEFVAL   { { monitorMinRate, monitorMaxRate,
+                   monitorMaxDelay } }
+      ::= { slapmPRMonEntry 4 }
+
+   slapmPRMonStatus OBJECT-TYPE
+      SYNTAX      SlapmStatus
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The value of this object indicates when a monitored
+         value has not meet a threshold or isn't meeting the
+         defined service level.  The SlapmStatus TEXTUAL-CONVENTION
+         defines two levels of not meeting a threshold.  The first
+         set:
+                     slaMinInRateNotAchieved(0),
+                     slaMaxInRateExceeded(1),
+                     slaMaxDelayExceeded(2),
+                     slaMinOutRateNotAchieved(3),
+                     slaMaxOutRateExceeded(4)
+
+         are used to indicate when the SLA as an aggregate is
+         not meeting a threshold while the second set:
+
+                     monitorMinInRateNotAchieved(5),
+                     monitorMaxInRateExceeded(6),
+                     monitorMaxDelayExceeded(7),
+                     monitorMinOutRateNotAchieved(8),
+                     monitorMaxOutRateExceeded(9)
+
+         indicate that at least one subcomponent is not meeting
+         a threshold."
+      ::= { slapmPRMonEntry 5 }
+
+   slapmPRMonInterval OBJECT-TYPE
+      SYNTAX      Unsigned32 (15..86400) -- 15 second min, 24 hour max
+      UNITS       "seconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The number of seconds that defines the sample period."
+      DEFVAL   {20}    -- 20 seconds
+      ::= { slapmPRMonEntry 6 }
+
+   slapmPRMonIntTime OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The timestamp for when the last interval ended."
+      DEFVAL { '0000000000000000'H }
+      ::= { slapmPRMonEntry 7 }
+
+   slapmPRMonCurrentInRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Using the value of the corresponding
+         slapmPRMonInterval, slapmPolicyRuleStatsInOctets
+         is sampled and then divided by slapmPRMonInterval
+         to determine the current in transfer rate."
+      ::= { slapmPRMonEntry 8 }
+
+   slapmPRMonCurrentOutRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "Using the value of the corresponding
+         slapmPolicyMonInterval, slapmPolicyRuleStatsOutOctets
+         is sampled and then divided by slapmPRMonInterval
+         to determine the current out transfer rate."
+      ::= { slapmPRMonEntry 9 }
+
+   slapmPRMonMinRateLow OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The threshold for generating a
+         slapmPolicyRuleMonNotOkay notification, signalling
+         that a monitored minimum transfer rate has not been meet.
+
+         A slapmPolicyRuleMonNotOkay notification is not
+         generated again for an slapmPRMonEntry until
+         the minimum transfer rate
+         exceeds slapmPRMonMinRateHigh (a
+         slapmPolicyRuleMonOkay notification is then transmitted)
+         and then fails below slapmPRMonMinRateLow.  This
+         behavior reduces the slapmPolicyRuleMonNotOkay
+         notifications that are transmitted.
+
+         A value of zero for this object is returned when the
+         slapmPRMonControl monitorMinRate(0) is not
+         enabled.  When enabled the default value for this object
+         is the min rate value specified in the associated
+         action definition minus 10%.  If the action definition
+         doesn't have a min rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMinRate(0)
+         is selected.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be selected in
+         order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPRMonEntry 10 }
+
+   slapmPRMonMinRateHigh OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The threshold for generating a slapmPolicyRuleMonOkay
+         notification, signalling that a monitored minimum
+         transfer rate has increased to an acceptable level.
+
+         A value of zero for this object is returned when the
+         slapmPRMonControl monitorMinRate(0) is not
+         enabled.  When enabled the default value for this object
+         is the min rate value specified in the associated
+         action definition plus 10%.  If the action definition
+         doesn't have a min rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMinRate(0)
+         is selected.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be selected
+         in order for any notification relating to this entry to
+
+         potentially be generated."
+      ::= { slapmPRMonEntry 11 }
+
+   slapmPRMonMaxRateHigh OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The threshold for generating a
+         slapmPolicyRuleMonNotOkay notification, signalling
+         that a monitored maximum transfer rate has been exceeded.
+
+         A slapmPolicyRuleNotOkay notification is not
+         generated again for an slapmPRMonEntry until the
+         maximum transfer rate fails below
+         slapmPRMonMaxRateLow (a slapmPolicyRuleMonOkay
+         notification is then transmitted) and then raises above
+         slapmPRMonMaxRateHigh.  This behavior reduces the
+         slapmPolicyRuleMonNotOkay notifications that are
+         transmitted.
+
+         A value of zero for this object is returned when the
+         slapmPRMonControl monitorMaxRate(1) is not
+         enabled.  When enabled the default value for this object
+         is the max rate value specified in the associated
+         action definition plus 10%.  If the action definition
+         doesn't have a max rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxRate(1)
+         is selected.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be selected in
+         order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPRMonEntry 12 }
+
+   slapmPRMonMaxRateLow OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "kilobits per second"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The threshold for generating a slapmPolicyRuleMonOkay
+         notification, signalling that a monitored maximum
+         transfer rate has fallen to an acceptable level.
+
+         A value of zero for this object is returned when the
+         slapmPRMonControl monitorMaxRate(1) is not
+         enabled.  When enabled the default value for this object
+         is the max rate value specified in the associated
+         action definition minus 10%.  If the action definition
+         doesn't have a max rate defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxRate(1)
+         is selected.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be selected in
+         order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPRMonEntry 13 }
+
+   slapmPRMonMaxDelayHigh OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The threshold for generating a
+         slapmPolicyRuleMonNotOkay notification, signalling
+         that a monitored maximum delay rate has been exceeded.
+
+         A slapmPolicyRuleMonNotOkay notification is not
+         generated again for an slapmPRMonEntry until
+         the maximum delay rate falls below
+         slapmPRMonMaxDelayLow (a slapmPolicyRuleMonOkay
+         notification is then transmitted) and raises above
+         slapmPRMonMaxDelayHigh.  This behavior reduces
+         the slapmPolicyRuleMonNotOkay notifications that are
+         transmitted.
+
+         A value of zero for this object is returned when the
+         slapmPRMonControl monitorMaxDelay(4) is not
+         enabled.  When enabled the default value for this object
+         is the max delay value specified in the associated
+         action definition plus 10%.  If the action definition
+         doesn't have a max delay defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxDelay(4)
+         is selected.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be selected
+         in order for any notification relating to this entry to
+
+         potentially be generated."
+      ::= { slapmPRMonEntry 14 }
+
+   slapmPRMonMaxDelayLow OBJECT-TYPE
+      SYNTAX      Unsigned32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+         "The threshold for generating a slapmPolicyRuleMonOkay
+         notification, signalling that a monitored maximum delay
+         rate has fallen to an acceptable level.
+
+         A value of zero for this object is returned when the
+         slapmPRMonControl monitorMaxDelay(4) is not
+         enabled.  When enabled the default value for this object
+         is the max delay value specified in the associated
+         action definition minus 10%.  If the action definition
+         doesn't have a max delay defined then there is no
+         default for this object and a value MUST be specified
+         prior to activating this entry when monitorMaxDelay(4)
+         is selected.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be selected
+         in order for any notification relating to this entry to
+         potentially be generated."
+      ::= { slapmPRMonEntry 15 }
+
+   slapmPRMonMinInRateNotAchieves OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of times that a minimum transfer in rate
+          was not achieved."
+      ::= { slapmPRMonEntry 16 }
+
+   slapmPRMonMaxInRateExceeds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of times that a maximum transfer in rate
+          was exceeded."
+      ::= { slapmPRMonEntry 17 }
+
+   slapmPRMonMaxDelayExceeds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of times that a maximum delay in rate
+          was exceeded."
+      ::= { slapmPRMonEntry 18 }
+
+   slapmPRMonMinOutRateNotAchieves OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of times that a minimum transfer out rate
+          was not achieved."
+      ::= { slapmPRMonEntry 19 }
+
+   slapmPRMonMaxOutRateExceeds OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of times that a maximum transfer out rate
+          was exceeded."
+      ::= { slapmPRMonEntry 20 }
+
+   slapmPRMonCurrentDelayRate OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current delay rate for this entry.  This is
+          calculated by taking the average of the TCP
+          round trip times for all associating
+          slapmSubcomponentTable entries within a interval."
+      ::= { slapmPRMonEntry 21 }
+
+   slapmPRMonRowStatus  OBJECT-TYPE
+      SYNTAX       RowStatus
+      MAX-ACCESS   read-create
+      STATUS       current
+      DESCRIPTION
+        "This object allows entries to be created and deleted
+         in the slapmPRMonTable.  An entry in this table
+         is deleted by setting this object to destroy(6).
+
+         Removal of an corresponding (same policy index)
+
+         slapmPolicyRuleStatsEntry has the side effect of the
+         automatic deletion an entry in this table.
+
+         Note that an attempt to set any read-create object
+         defined within an slapmPRMonEntry while the value
+         of slapmPRMonRowStatus is active(1) will result in
+         an inconsistentValue error."
+      ::= { slapmPRMonEntry 22 }
+
+   -- Notifications
+
+   slapmMonitoredEventNotAchieved NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPolicyMonitorIntTime,
+          slapmPolicyMonitorControl,
+          slapmPolicyMonitorStatus,
+          slapmPolicyMonitorStatus,
+          slapmPolicyMonitorCurrentInRate,
+          slapmPolicyMonitorCurrentOutRate,
+          slapmPolicyMonitorCurrentDelayRate
+      }
+      STATUS  deprecated
+      DESCRIPTION
+         "This notification is generated when an monitored event
+         is not achieved with respect to threshold.  This
+         applies only towards monitoring a policy traffic
+         profile as an aggregate via an associating
+         slapmPolicyStatsEntry.  The value
+         of slapmPolicyMonitorControl can be examined to
+         determine what is being monitored.  The first
+         slapmPolicyMonitorStatus value supplies the current
+         monitor status while the 2nd value supplies the
+         previous status.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be
+         selected in order for this notification to
+         potentially be generated."
+      ::= { slapmNotifications 1 }
+
+   slapmMonitoredEventOkay NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPolicyMonitorIntTime,
+          slapmPolicyMonitorControl,
+          slapmPolicyMonitorStatus,
+          slapmPolicyMonitorStatus,
+          slapmPolicyMonitorCurrentInRate,
+          slapmPolicyMonitorCurrentOutRate,
+          slapmPolicyMonitorCurrentDelayRate
+      }
+      STATUS  deprecated
+      DESCRIPTION
+         "This notification is generated when a monitored
+         event has improved to an acceptable level.  This
+         applies only towards monitoring a policy traffic
+         profile as an aggregate via an associating
+         slapmPolicyStatsEntry.  The value
+         of slapmPolicyMonitorControl can be examined to
+         determine what is being monitored.  The first
+         slapmPolicyMonitorStatus value supplies the current
+         monitor status while the 2nd value supplies the
+         previous status.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableAggregateTraps(3), MUST be
+         selected in order for this notification to
+         potentially be generated."
+      ::= { slapmNotifications 2 }
+
+   slapmPolicyProfileDeleted NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPolicyStatsActiveConns,
+          slapmPolicyStatsTotalConns,
+          slapmPolicyStatsFirstActivated,
+          slapmPolicyStatsLastMapping,
+          slapmPolicyStatsInOctets,
+          slapmPolicyStatsOutOctets,
+          slapmPolicyStatsConnectionLimit,
+          slapmPolicyStatsCountAccepts,
+          slapmPolicyStatsCountDenies,
+          slapmPolicyStatsInDiscards,
+          slapmPolicyStatsOutDiscards,
+          slapmPolicyStatsInPackets,
+          slapmPolicyStatsOutPackets,
+          slapmPolicyStatsInProfileOctets,
+          slapmPolicyStatsOutProfileOctets,
+          slapmPolicyStatsMinRate,
+          slapmPolicyStatsMaxRate,
+          slapmPolicyStatsMaxDelay
+      }
+      STATUS  deprecated
+      DESCRIPTION
+         "A slapmPolicyDeleted notification is sent when a
+         slapmPolicyStatsEntry is deleted if the value of
+         slapmPolicyTrapEnable is enabled(1)."
+      ::= { slapmNotifications 3 }
+
+   slapmPolicyMonitorDeleted NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPolicyMonitorStatus,
+          slapmPolicyMonitorInterval,
+          slapmPolicyMonitorIntTime,
+          slapmPolicyMonitorCurrentInRate,
+          slapmPolicyMonitorCurrentOutRate,
+          slapmPolicyMonitorCurrentDelayRate,
+          slapmPolicyMonitorMinRateLow,
+          slapmPolicyMonitorMinRateHigh,
+          slapmPolicyMonitorMaxRateHigh,
+          slapmPolicyMonitorMaxRateLow,
+          slapmPolicyMonitorMaxDelayHigh,
+          slapmPolicyMonitorMaxDelayLow,
+          slapmPolicyMonitorMinInRateNotAchieves,
+          slapmPolicyMonitorMaxInRateExceeds,
+          slapmPolicyMonitorMaxDelayExceeds,
+          slapmPolicyMonitorMinOutRateNotAchieves,
+          slapmPolicyMonitorMaxOutRateExceeds
+      }
+      STATUS  deprecated
+      DESCRIPTION
+         "A slapmPolicyMonitorDeleted notification is sent when a
+         slapmPolicyMonitorEntry is deleted if the value of
+         slapmPolicyTrapEnable is enabled(1)."
+      ::= { slapmNotifications 4 }
+
+   slapmSubcomponentMonitoredEventNotAchieved NOTIFICATION-TYPE
+      OBJECTS {
+          slapmSubcomponentSystemAddress,
+          slapmSubcomponentPolicyName,
+          slapmSubcomponentTrafficProfileName,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorIntTime,
+          slapmSubcomponentMonitorCurrentInRate,
+          slapmSubcomponentMonitorCurrentOutRate,
+          slapmSubcomponentTcpRoundTripTime
+      }
+      STATUS  deprecated
+      DESCRIPTION
+         "This notification is generated when a monitored value
+         does not achieved a threshold specification.  This
+         applies only towards monitoring the individual components
+         of a policy traffic profile.  The value of the
+         corresponding slapmPolicyMonitorControl can be examined
+         to determine what is being monitored.  The first
+         slapmSubcomponentMonitorStatus value supplies the current
+
+         monitor status while the 2nd value supplies the
+         previous status.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableSubcomponentTraps(4), MUST be selected
+         in order for this notification to potentially be generated."
+      ::= { slapmNotifications 5 }
+
+   slapmSubcomponentMonitoredEventOkay NOTIFICATION-TYPE
+      OBJECTS {
+          slapmSubcomponentSystemAddress,
+          slapmSubcomponentPolicyName,
+          slapmSubcomponentTrafficProfileName,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorIntTime,
+          slapmSubcomponentMonitorCurrentInRate,
+          slapmSubcomponentMonitorCurrentOutRate,
+          slapmSubcomponentTcpRoundTripTime
+      }
+      STATUS  deprecated
+      DESCRIPTION
+         "This notification is generated when a monitored value
+         has reached an acceptable level.
+
+         Note: The corresponding slapmPolicyMonitorControl
+         BITS setting, enableSubcomponentTraps(3), MUST be
+         selected in order for this notification to potentially
+         be generated."
+      ::= { slapmNotifications 6 }
+
+   slapmPolicyRuleMonNotOkay NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPRMonIntTime,
+          slapmPRMonControl,
+          slapmPRMonStatus,
+          slapmPRMonStatus,
+          slapmPRMonCurrentInRate,
+          slapmPRMonCurrentOutRate,
+          slapmPRMonCurrentDelayRate
+      }
+      STATUS  current
+      DESCRIPTION
+         "This notification is generated when an monitored event
+         is not achieved with respect to a threshold.  This
+         applies only towards monitoring a policy rule
+         as an aggregate via an associating
+         slapmPolicyRuleStatsEntry.  The value
+
+         of slapmPRMonControl can be examined to
+         determine what is being monitored.  The first
+         slapmPRMonStatus value supplies the current
+         monitor status while the 2nd value supplies the
+         previous status.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be
+         selected in order for this notification to
+         potentially be generated."
+      ::= { slapmNotifications 7 }
+
+   slapmPolicyRuleMonOkay NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPRMonIntTime,
+          slapmPRMonControl,
+          slapmPRMonStatus,
+          slapmPRMonStatus,
+          slapmPRMonCurrentInRate,
+          slapmPRMonCurrentOutRate,
+          slapmPRMonCurrentDelayRate
+      }
+      STATUS  current
+      DESCRIPTION
+         "This notification is generated when a monitored
+         event has improved to an acceptable level.  This
+         applies only towards monitoring a policy rule
+         as an aggregate via an associating
+         slapmPolicyRuleStatsEntry.  The value
+         of slapmPRMonControl can be examined to
+         determine what is being monitored.  The first
+         slapmPRMonStatus value supplies the current
+         monitor status while the 2nd value supplies the
+         previous status.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableAggregateTraps(3), MUST be
+         selected in order for this notification to
+         potentially be generated."
+      ::= { slapmNotifications 8 }
+
+   slapmPolicyRuleDeleted NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPolicyRuleStatsActiveConns,
+          slapmPolicyRuleStatsTotalConns,
+          slapmPolicyRuleStatsLActivated,
+          slapmPolicyRuleStatsLastMapping,
+          slapmPolicyRuleStatsInOctets,
+          slapmPolicyRuleStatsOutOctets,
+          slapmPolicyRuleStatsConnLimit,
+          slapmPolicyRuleStatsCountAccepts,
+          slapmPolicyRuleStatsCountDenies,
+          slapmPolicyRuleStatsInDiscards,
+          slapmPolicyRuleStatsOutDiscards,
+          slapmPolicyRuleStatsInPackets,
+          slapmPolicyRuleStatsOutPackets,
+          slapmPolicyRuleStatsInProOctets,
+          slapmPolicyRuleStatsOutProOctets,
+          slapmPolicyRuleStatsMinRate,
+          slapmPolicyRuleStatsMaxRate,
+          slapmPolicyRuleStatsMaxDelay,
+          slapmPolicyRuleStatsTotalRsvpFlows,
+          slapmPolicyRuleStatsActRsvpFlows
+      }
+      STATUS  current
+      DESCRIPTION
+         "A slapmPolicyRuleDeleted notification is sent when a
+         slapmPolicyRuleStatsEntry is deleted if the value of
+         slapmPolicyTrapEnable is enabled(1)."
+      ::= { slapmNotifications 9 }
+
+   slapmPolicyRuleMonDeleted NOTIFICATION-TYPE
+      OBJECTS {
+          slapmPRMonControl,
+          slapmPRMonStatus,
+          slapmPRMonInterval,
+          slapmPRMonIntTime,
+          slapmPRMonCurrentInRate,
+          slapmPRMonCurrentOutRate,
+          slapmPRMonCurrentDelayRate,
+          slapmPRMonMinRateLow,
+          slapmPRMonMinRateHigh,
+          slapmPRMonMaxRateHigh,
+          slapmPRMonMaxRateLow,
+          slapmPRMonMaxDelayHigh,
+          slapmPRMonMaxDelayLow,
+          slapmPRMonMinInRateNotAchieves,
+          slapmPRMonMaxInRateExceeds,
+          slapmPRMonMaxDelayExceeds,
+          slapmPRMonMinOutRateNotAchieves,
+          slapmPRMonMaxOutRateExceeds
+      }
+      STATUS  current
+      DESCRIPTION
+         "A slapmPolicyRuleMonDeleted notification is sent when a
+         slapmPRMonEntry is deleted if the value of
+
+         slapmPolicyTrapEnable is enabled(1)."
+      ::= { slapmNotifications 10 }
+
+   slapmSubcMonitorNotOkay NOTIFICATION-TYPE
+      OBJECTS {
+          slapmSubcomponentSystemAddress,
+          slapmSubcomponentPolicyRuleIndex,
+          slapmPRMonControl,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorIntTime,
+          slapmSubcomponentMonitorCurrentInRate,
+          slapmSubcomponentMonitorCurrentOutRate,
+          slapmSubcomponentTcpRoundTripTime
+      }
+      STATUS  current
+      DESCRIPTION
+         "This notification is generated when a monitored value
+         does not achieved a threshold specification.  This
+         applies only towards monitoring the individual components
+         of a policy rule.  The value of the
+         corresponding slapmPRMonControl can be examined
+         to determine what is being monitored.  The first
+         slapmSubcomponentMonitorStatus value supplies the current
+         monitor status while the 2nd value supplies the
+         previous status.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableSubcomponentTraps(4), MUST be selected
+         in order for this notification to potentially be generated."
+      ::= { slapmNotifications 11 }
+
+   slapmSubcMonitorOkay NOTIFICATION-TYPE
+      OBJECTS {
+          slapmSubcomponentSystemAddress,
+          slapmSubcomponentPolicyRuleIndex,
+          slapmPRMonControl,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorStatus,
+          slapmSubcomponentMonitorIntTime,
+          slapmSubcomponentMonitorCurrentInRate,
+          slapmSubcomponentMonitorCurrentOutRate,
+          slapmSubcomponentTcpRoundTripTime
+      }
+      STATUS  current
+      DESCRIPTION
+         "This notification is generated when a monitored value
+
+         has reached an acceptable level.
+
+         Note: The corresponding slapmPRMonControl
+         BITS setting, enableSubcomponentTraps(3), MUST be
+         selected in order for this notification to potentially
+         be generated."
+      ::= { slapmNotifications 12 }
+
+   -- Conformance information
+   -- Compliance statements
+
+   slapmCompliances OBJECT IDENTIFIER ::= { slapmConformance 1 }
+   slapmGroups      OBJECT IDENTIFIER ::= { slapmConformance 2 }
+
+   -- Compliance statements
+
+   slapmCompliance MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+              "The compliance statement for the SLAPM-MIB."
+      MODULE  -- this module
+          MANDATORY-GROUPS {
+                              slapmBaseGroup2,
+                              slapmNotGroup2
+                           }
+          GROUP slapmEndSystemGroup2
+          DESCRIPTION
+              "The contents of this group is required by end-system
+              implementations."
+          GROUP slapmEndSystemNotGroup2
+          DESCRIPTION
+              "The contents of this group is required by end-system
+              implementations."
+          GROUP slapmBaseGroup
+          DESCRIPTION
+              "The contents of this group has been deprecated in favor
+              of the new slapmBaseGroup2.  Older implementations of this
+              MIB would continue its support of the contents of this
+              group."
+          GROUP slapmNotGroup
+          DESCRIPTION
+              "The contents of this group has been deprecated in favor
+              of the new slapmNotGroup2.  Older implementations of this
+              MIB would continue its support of the contents of
+              this group."
+          GROUP slapmOptionalGroup
+          DESCRIPTION
+              "The contents of this group has been deprecated."
+
+          GROUP slapmEndSystemGroup
+          DESCRIPTION
+              "The contents of this group has been deprecated in favor
+              of the new slapmEndSystemGroup2.  Older implementations
+              of this MIB would continue its support of the
+              contents of this group."
+          GROUP slapmEndSystemNotGroup
+          DESCRIPTION
+              "The contents of this group has been deprecated in favor
+              of the new slapmEndSystemNotGroup2.  Older
+              implementations of this MIB would continue its support
+              of the contents of this group."
+      ::= { slapmCompliances 1 }
+
+   -- MIB groupings
+
+   slapmBaseGroup OBJECT-GROUP
+     OBJECTS {
+               slapmSpinLock,
+               slapmPolicyCountQueries,
+               slapmPolicyCountAccesses,
+               slapmPolicyCountSuccessAccesses,
+               slapmPolicyCountNotFounds,
+               slapmPolicyPurgeTime,
+               slapmPolicyTrapEnable,
+               slapmPolicyStatsOperStatus,
+               slapmPolicyStatsActiveConns,
+               slapmPolicyStatsFirstActivated,
+               slapmPolicyStatsLastMapping,
+               slapmPolicyStatsInOctets,
+               slapmPolicyStatsOutOctets,
+               slapmPolicyStatsConnectionLimit,
+               slapmPolicyStatsTotalConns,
+               slapmPolicyStatsCountAccepts,
+               slapmPolicyStatsCountDenies,
+               slapmPolicyStatsInDiscards,
+               slapmPolicyStatsOutDiscards,
+               slapmPolicyStatsInPackets,
+               slapmPolicyStatsOutPackets,
+               slapmPolicyStatsMinRate,
+               slapmPolicyStatsMaxRate,
+               slapmPolicyStatsMaxDelay,
+               slapmPolicyMonitorControl,
+               slapmPolicyMonitorStatus,
+               slapmPolicyMonitorInterval,
+               slapmPolicyMonitorIntTime,
+               slapmPolicyMonitorCurrentInRate,
+               slapmPolicyMonitorCurrentOutRate,
+               slapmPolicyMonitorMinRateLow,
+               slapmPolicyMonitorMinRateHigh,
+               slapmPolicyMonitorMaxRateHigh,
+               slapmPolicyMonitorMaxRateLow,
+               slapmPolicyMonitorMaxDelayHigh,
+               slapmPolicyMonitorMaxDelayLow,
+               slapmPolicyMonitorMinInRateNotAchieves,
+               slapmPolicyMonitorMaxInRateExceeds,
+               slapmPolicyMonitorMaxDelayExceeds,
+               slapmPolicyMonitorMinOutRateNotAchieves,
+               slapmPolicyMonitorMaxOutRateExceeds,
+               slapmPolicyMonitorCurrentDelayRate,
+               slapmPolicyMonitorRowStatus
+              }
+    STATUS deprecated
+    DESCRIPTION
+        "The group of objects defined by this MIB that are
+        required for all implementations to be compliant."
+    ::= { slapmGroups 1 }
+
+   slapmOptionalGroup OBJECT-GROUP
+     OBJECTS {
+               slapmPolicyStatsInProfileOctets,
+               slapmPolicyStatsOutProfileOctets
+             }
+    STATUS deprecated
+    DESCRIPTION
+        "The group of objects defined by this MIB that are
+        optional."
+    ::= { slapmGroups 2 }
+
+   slapmEndSystemGroup OBJECT-GROUP
+     OBJECTS {
+               slapmPolicyTrapFilter,
+               slapmSubcomponentProtocol,
+               slapmSubcomponentSystemAddress,
+               slapmSubcomponentPolicyName,
+               slapmSubcomponentTrafficProfileName,
+               slapmSubcomponentLastActivity,
+               slapmSubcomponentInOctets,
+               slapmSubcomponentOutOctets,
+               slapmSubcomponentTcpOutBufferedOctets,
+               slapmSubcomponentTcpInBufferedOctets,
+               slapmSubcomponentTcpReXmts,
+               slapmSubcomponentTcpRoundTripTime,
+               slapmSubcomponentTcpRoundTripVariance,
+               slapmSubcomponentInPdus,
+               slapmSubcomponentOutPdus,
+               slapmSubcomponentApplName,
+               slapmSubcomponentMonitorStatus,
+               slapmSubcomponentMonitorIntTime,
+               slapmSubcomponentMonitorCurrentOutRate,
+               slapmSubcomponentMonitorCurrentInRate
+             }
+     STATUS  deprecated
+     DESCRIPTION
+         "The group of objects defined by this MIB that are
+         required for end system implementations."
+     ::= { slapmGroups 3 }
+
+   slapmNotGroup NOTIFICATION-GROUP
+     NOTIFICATIONS {
+               slapmMonitoredEventNotAchieved,
+               slapmMonitoredEventOkay,
+               slapmPolicyProfileDeleted,
+               slapmPolicyMonitorDeleted
+             }
+     STATUS  deprecated
+     DESCRIPTION
+         "The group of notifications defined by this MIB that MUST
+         be implemented."
+     ::= { slapmGroups 4 }
+
+   slapmEndSystemNotGroup NOTIFICATION-GROUP
+     NOTIFICATIONS {
+               slapmSubcomponentMonitoredEventNotAchieved,
+               slapmSubcomponentMonitoredEventOkay
+             }
+     STATUS  deprecated
+     DESCRIPTION
+         "The group of objects defined by this MIB that are
+         required for end system implementations."
+     ::= { slapmGroups 5 }
+
+   slapmBaseGroup2 OBJECT-GROUP
+     OBJECTS {
+               slapmSpinLock,
+               slapmPolicyCountQueries,
+               slapmPolicyCountAccesses,
+               slapmPolicyCountSuccessAccesses,
+               slapmPolicyCountNotFounds,
+               slapmPolicyPurgeTime,
+               slapmPolicyTrapEnable,
+               slapmPolicyNameOfRule,
+               slapmPolicyRuleStatsOperStatus,
+               slapmPolicyRuleStatsActiveConns,
+               slapmPolicyRuleStatsTotalConns,
+               slapmPolicyRuleStatsLActivated,
+               slapmPolicyRuleStatsLastMapping,
+               slapmPolicyRuleStatsInOctets,
+               slapmPolicyRuleStatsOutOctets,
+               slapmPolicyRuleStatsConnLimit,
+               slapmPolicyRuleStatsCountAccepts,
+               slapmPolicyRuleStatsCountDenies,
+               slapmPolicyRuleStatsInDiscards,
+               slapmPolicyRuleStatsOutDiscards,
+               slapmPolicyRuleStatsInPackets,
+               slapmPolicyRuleStatsOutPackets,
+               slapmPolicyRuleStatsInProOctets,
+               slapmPolicyRuleStatsOutProOctets,
+               slapmPolicyRuleStatsMinRate,
+               slapmPolicyRuleStatsMaxRate,
+               slapmPolicyRuleStatsMaxDelay,
+               slapmPolicyRuleStatsTotalRsvpFlows,
+               slapmPolicyRuleStatsActRsvpFlows,
+               slapmPRMonControl,
+               slapmPRMonStatus,
+               slapmPRMonInterval,
+               slapmPRMonIntTime,
+               slapmPRMonCurrentInRate,
+               slapmPRMonCurrentOutRate,
+               slapmPRMonMinRateLow,
+               slapmPRMonMinRateHigh,
+               slapmPRMonMaxRateHigh,
+               slapmPRMonMaxRateLow,
+               slapmPRMonMaxDelayHigh,
+               slapmPRMonMaxDelayLow,
+               slapmPRMonMinInRateNotAchieves,
+               slapmPRMonMaxInRateExceeds,
+               slapmPRMonMaxDelayExceeds,
+               slapmPRMonMinOutRateNotAchieves,
+               slapmPRMonMaxOutRateExceeds,
+               slapmPRMonCurrentDelayRate,
+               slapmPRMonRowStatus
+              }
+    STATUS current
+    DESCRIPTION
+        "The group of objects defined by this MIB that are
+        required for all implementations to be compliant."
+    ::= { slapmGroups 6 }
+
+   slapmEndSystemGroup2 OBJECT-GROUP
+     OBJECTS {
+               slapmPolicyTrapFilter,
+               slapmSubcomponentProtocol,
+               slapmSubcomponentSystemAddress,
+               slapmSubcomponentLastActivity,
+               slapmSubcomponentInOctets,
+               slapmSubcomponentOutOctets,
+               slapmSubcomponentTcpOutBufferedOctets,
+               slapmSubcomponentTcpInBufferedOctets,
+               slapmSubcomponentTcpReXmts,
+               slapmSubcomponentTcpRoundTripTime,
+               slapmSubcomponentTcpRoundTripVariance,
+               slapmSubcomponentInPdus,
+               slapmSubcomponentOutPdus,
+               slapmSubcomponentApplName,
+               slapmSubcomponentMonitorStatus,
+               slapmSubcomponentMonitorIntTime,
+               slapmSubcomponentMonitorCurrentOutRate,
+               slapmSubcomponentMonitorCurrentInRate,
+               slapmSubcomponentPolicyRuleIndex
+             }
+     STATUS  current
+     DESCRIPTION
+         "The group of objects defined by this MIB that are
+         required for end system implementations."
+     ::= { slapmGroups 7 }
+
+   slapmNotGroup2 NOTIFICATION-GROUP
+     NOTIFICATIONS {
+               slapmPolicyRuleMonNotOkay,
+               slapmPolicyRuleMonOkay,
+               slapmPolicyRuleDeleted,
+               slapmPolicyRuleMonDeleted
+             }
+     STATUS  current
+     DESCRIPTION
+         "The group of notifications defined by this MIB that MUST
+         be implemented."
+     ::= { slapmGroups 8 }
+
+   slapmEndSystemNotGroup2 NOTIFICATION-GROUP
+     NOTIFICATIONS {
+               slapmSubcMonitorNotOkay,
+               slapmSubcMonitorOkay
+             }
+     STATUS  current
+     DESCRIPTION
+         "The group of objects defined by this MIB that are
+         required for end system implementations."
+     ::= { slapmGroups 9 }
+
+END
diff --git a/snmp_builder/mibs/SMON-MIB.mib b/snmp_builder/mibs/SMON-MIB.mib
new file mode 100644
index 0000000..7130368
--- /dev/null
+++ b/snmp_builder/mibs/SMON-MIB.mib
@@ -0,0 +1,1254 @@
+SMON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+     Integer32, Counter64
+             FROM SNMPv2-SMI
+     RowStatus, TEXTUAL-CONVENTION
+             FROM SNMPv2-TC
+     rmon, OwnerString
+             FROM RMON-MIB
+     LastCreateTime, DataSource, rmonConformance, probeConfig
+             FROM RMON2-MIB
+     InterfaceIndex
+             FROM IF-MIB
+     MODULE-COMPLIANCE, OBJECT-GROUP
+             FROM SNMPv2-CONF;
+
+switchRMON MODULE-IDENTITY
+     LAST-UPDATED "9812160000Z"
+     ORGANIZATION "IETF RMON MIB Working Group"
+     CONTACT-INFO
+     "IETF RMONMIB WG Mailing list: rmonmib@cisco.com
+
+             Rich Waterman
+             Allot Networks Inc.
+             Tel:  +1-408-559-0253
+             Email: rich@allot.com
+
+             Bill Lahaye
+             Xylan Corp.
+             Tel: +1-800-995-2612
+             Email:  lahaye@ctron.com
+
+             Dan Romascanu
+             Lucent Technologies
+             Tel:  +972-3-645-8414
+             Email: dromasca@lucent.com
+
+             Steven Waldbusser
+             International Network Services (INS)
+             Tel: +1-650-318-1251
+             Email: waldbusser@ins.com"
+     DESCRIPTION
+             "The MIB module for managing remote monitoring device
+              implementations for Switched Networks"
+
+      -- revision history
+
+     REVISION    "9812160000Z"     -- 16 Dec 1998 midemight
+     DESCRIPTION "Initial Version, published as RFC 2613."
+     ::= { rmon 22 }
+
+smonMIBObjects OBJECT IDENTIFIER ::= { switchRMON 1 }
+
+dataSourceCaps          OBJECT IDENTIFIER ::= {smonMIBObjects 1}
+smonStats               OBJECT IDENTIFIER ::= {smonMIBObjects 2}
+portCopyConfig          OBJECT IDENTIFIER ::= {smonMIBObjects 3}
+smonRegistrationPoints  OBJECT IDENTIFIER ::= {smonMIBObjects 4}
+
+-- Textual Conventions
+--
+
+SmonDataSource ::= TEXTUAL-CONVENTION
+ STATUS        current
+ DESCRIPTION
+     "Identifies the source of the data that the associated function
+      is configured to analyze. This Textual Convention
+      extends the DataSource Textual Convention defined by RMON 2
+      to the following data source types:
+
+      - ifIndex.<I>
+      DataSources of this traditional form are called 'port-based',
+      but only if ifType.<I> is not equal to 'propVirtual(53)'.
+
+      - smonVlanDataSource.<V>
+      A dataSource of this form refers to a 'Packet-based VLAN'
+      and is called a 'VLAN-based' dataSource. <V> is the VLAN
+      ID as defined by the IEEE 802.1Q standard [19]. The
+      value is between 1 and 4094 inclusive, and it represents
+      an 802.1Q VLAN-ID with global scope within a given
+      bridged domain, as defined by [19].
+
+     - entPhysicalEntry.<N>
+      A dataSource of this form refers to a physical entity within
+      the agent (e.g. entPhysicalClass = backplane(4)) and is called
+      an 'entity-based' dataSource."
+ SYNTAX      OBJECT IDENTIFIER
+
+-- The smonCapabilities object describes SMON agent capabilities.
+
+smonCapabilities OBJECT-TYPE
+ SYNTAX BITS {
+   smonVlanStats(0),
+   smonPrioStats(1),
+   dataSource(2),
+   smonUnusedBit(3),
+   portCopy(4)
+   }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+     "An indication of the SMON MIB groups supported
+      by this agent."
+ ::= { probeConfig  15 }
+
+-- dataSourceCaps MIB group - defines SMON data source and port
+-- copy capabilities for devices supporting SMON.
+
+-- A NMS application will check this MIB group and retrieve
+-- information about the SMON capabilities of the device before
+-- applying SMON control operations to the device.
+
+-- dataSourceCapsTable: defines capabilities of RMON data sources
+
+dataSourceCapsTable OBJECT-TYPE
+ SYNTAX      SEQUENCE OF DataSourceCapsEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "This table describes RMON data sources and port copy
+     capabilities. An NMS MAY use this table to discover the
+     identity and attributes of the data sources on a given agent
+     implementation. Similar to the probeCapabilities object,
+     actual row-creation operations will succeed or fail based on
+     the resources available and parameter values used in each
+     row-creation operation.
+
+     Upon restart of the RMON agent, the dataSourceTable, ifTable,
+     and perhaps entPhysicalTable are initialized for the available
+     dataSources.
+
+     For each dataSourceCapsEntry representing a VLAN or
+     entPhysicalEntry the agent MUST create an associated ifEntry
+     with a ifType value of 'propVirtual(53)'. This ifEntry will be
+     used as the actual value in RMON control table dataSource
+     objects. The assigned ifIndex value is copied into the
+     associated dataSourceCapsIfIndex object.
+
+     It is understood that dataSources representing VLANs may not
+     always be instantiated immediately upon restart, but rather as
+
+     VLAN usage is detected by the agent. The agent SHOULD attempt
+     to create dataSource and interface entries for all dataSources
+     as soon as possible."
+::= { dataSourceCaps 1 }
+
+dataSourceCapsEntry  OBJECT-TYPE
+ SYNTAX      DataSourceCapsEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "Entries per data source containing descriptions of data
+      source and port copy capabilities. This table is populated by
+      the SMON agent with one entry for each supported data
+      source."
+INDEX { IMPLIED dataSourceCapsObject }
+::= { dataSourceCapsTable 1 }
+
+DataSourceCapsEntry ::= SEQUENCE {
+     dataSourceCapsObject
+             SmonDataSource,
+     dataSourceRmonCaps
+             BITS,
+     dataSourceCopyCaps
+             BITS,
+     dataSourceCapsIfIndex
+             InterfaceIndex
+     }
+
+dataSourceCapsObject OBJECT-TYPE
+ SYNTAX      SmonDataSource
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "Defines an object that can be a SMON data source or a
+       source or a destination for a port copy operation."
+ ::= { dataSourceCapsEntry 1  }
+
+dataSourceRmonCaps OBJECT-TYPE
+ SYNTAX BITS {
+        countErrFrames(0),
+        countAllGoodFrames(1),
+        countAnyRmonTables(2),
+        babyGiantsCountAsGood(3)
+        }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+     " General attributes of the specified dataSource. Note that
+     these are static attributes, which SHOULD NOT be adjusted
+     because of current resources or configuration.
+
+   - countErrFrames(0)
+       The agent sets this bit for the dataSource if errored frames
+       received on this dataSource can actually be monitored by the
+       agent The agent clears this bit if any errored frames are
+       not visible to the RMON data collector.
+
+   - countAllGoodFrames(1)
+       The agent sets this bit for the dataSource if all good
+       frames received on this dataSource can actually be monitored
+       by the agent. The agent clears this bit if any good frames
+       are not visible for RMON collection, e.g., the dataSource is
+       a non-promiscuous interface or an internal switch interface
+       which may not receive frames which were switched in hardware
+       or dropped by the bridge forwarding function.
+
+   - countAnyRmonTables(2)
+       The agent sets this bit if this dataSource can actually be
+       used in any of the implemented RMON tables, resources
+       notwithstanding. The agent clears this bit if this
+       dataSourceCapsEntry is present simply to identify a
+       dataSource that may only be used as portCopySource and/or a
+       portCopyDest, but not the source of an actual RMON data
+       collection.
+
+   - babyGiantsCountAsGood(3)
+       The agent sets this bit if it can distinguish, for counting
+       purposes, between true giant frames and frames that exceed
+       Ethernet maximum frame size 1518 due to VLAN tagging ('baby
+       giants'). Specifically, this BIT means that frames up to
+       1522 octets are counted as good.
+
+       Agents not capable of detecting 'baby giants' will clear
+       this bit and will view all frames less than or equal to 1518
+       octets as 'good frames' and all frames larger than 1518
+       octets as 'bad frames' for the purpose of counting in the
+       smonVlanIdStats and smonPrioStats tables.
+
+       Agents capable of detecting 'baby giants' SHALL consider
+       them as 'good frames' for the purpose of counting in the
+       smonVlanIdStats and smonPrioStats tables."
+ ::= { dataSourceCapsEntry 2  }
+
+dataSourceCopyCaps OBJECT-TYPE
+ SYNTAX BITS {
+     copySourcePort(0),
+     copyDestPort(1),
+     copySrcTxTraffic(2),
+     copySrcRxTraffic(3),
+     countDestDropEvents(4),
+     copyErrFrames(5),
+     copyUnalteredFrames(6),
+     copyAllGoodFrames(7)
+     }
+ MAX-ACCESS   read-only
+ STATUS       current
+ DESCRIPTION
+     "PortCopy function capabilities of the specified dataSource.
+ Note that these are static capabilities, which SHOULD NOT be
+ adjusted because of current resources or configuration.
+
+   - copySourcePort(0)
+       The agent sets this bit if this dataSource is capable of
+       acting as a source of a portCopy operation. The agent clears
+       this bit otherwise.
+
+   - copyDestPort(1)
+       The agent sets this bit if this dataSource is capable of
+       acting as a destination of a portCopy operation. The agent
+       clears this bit otherwise.
+
+  - copySrcTxTraffic(2)
+       If the copySourcePort bit is set:
+             The agent sets this bit if this dataSource is capable of
+           copying frames transmitted out this portCopy source. The
+           agent clears this bit otherwise. This function is needed
+           to support full-duplex ports.
+        Else:
+            this bit SHOULD be cleared.
+
+   - copySrcRxTraffic(3)
+       If the copySourcePort bit is set:
+         The agent sets this bit if this dataSource is capable of
+         copying frames received on this portCopy source. The agent
+         clears this bit otherwise. This function is needed to
+         support full-duplex ports.
+       Else:
+         this bit SHOULD be cleared.
+
+   - countDestDropEvents(4)
+       If the copyDestPort bit is set:
+           The agent sets this bit if it is capable of incrementing
+
+           portCopyDestDropEvents, when this dataSource is the
+           target of a portCopy operation and a frame destined to
+           this dataSource is dropped (for RMON counting purposes).
+       Else:
+           this BIT SHOULD be cleared.
+
+   - copyErrFrames(5)
+       If the copySourcePort bit is set:
+           The agent sets this bit if it is capable of copying all
+           errored frames from this portCopy source-port, for
+           errored frames received on this dataSource.
+       Else:
+           this BIT SHOULD be cleared.
+
+   - copyUnalteredFrames(6)
+       If the copySourcePort bit is set:
+           The agent sets the copyUnalteredFrames bit If it is
+           capable of copying all frames from this portCopy
+           source-port without alteration in any way;
+       Else:
+           this bit SHOULD be cleared.
+
+   - copyAllGoodFrames(7)
+       If the copySourcePort bit is set:
+           The agent sets this bit for the dataSource if all good
+           frames received on this dataSource are normally capable
+           of being copied by the agent. The agent clears this bit
+           if any good frames are not visible for the RMON portCopy
+           operation, e.g., the dataSource is a non-promiscuous
+           interface or an internal switch interface which may not
+           receive frames which were switched in hardware or
+           dropped by the bridge forwarding function.
+        Else:
+           this bit SHOULD be cleared."
+ ::= { dataSourceCapsEntry 3  }
+
+dataSourceCapsIfIndex OBJECT-TYPE
+SYNTAX       InterfaceIndex
+MAX-ACCESS   read-only
+STATUS       current
+DESCRIPTION
+     "This object contains the ifIndex value of the ifEntry
+      associated with this smonDataSource. The agent MUST create
+      'propVirtual' ifEntries for each dataSourceCapsEntry of type
+      VLAN or entPhysicalEntry."
+ ::= { dataSourceCapsEntry 4  }
+
+-- The SMON Statistics MIB Group
+
+-- aggregated statistics for IEEE 802.1Q VLAN environments.
+
+-- VLAN statistics can be gathered by configuring smonVlanIdStats
+-- and/or smonPrioStats collections. These functions allow a
+-- VLAN-ID or user priority distributions per dataSource,
+-- auto-populated by the agent in a manner similar to the RMON
+-- hostTable.
+
+-- Only good frames are counted in the tables described in this
+-- section.
+
+-- VLAN ID Stats
+
+-- smonVlanStatsControlTable allows configuration of VLAN-ID
+-- collections.
+
+smonVlanStatsControlTable OBJECT-TYPE
+ SYNTAX      SEQUENCE OF SmonVlanStatsControlEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "Controls the setup of VLAN statistics tables.
+
+      The statistics collected represent a distribution based on
+      the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed
+      to the data source for the collection."
+ ::= { smonStats 1 }
+
+smonVlanStatsControlEntry OBJECT-TYPE
+ SYNTAX      SmonVlanStatsControlEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "A conceptual row in the smonVlanStatsControlTable."
+ INDEX { smonVlanStatsControlIndex }
+ ::= { smonVlanStatsControlTable 1 }
+
+SmonVlanStatsControlEntry ::= SEQUENCE {
+ smonVlanStatsControlIndex                 Integer32,
+ smonVlanStatsControlDataSource           DataSource,
+ smonVlanStatsControlCreateTime       LastCreateTime,
+ smonVlanStatsControlOwner               OwnerString,
+ smonVlanStatsControlStatus                RowStatus
+}
+
+smonVlanStatsControlIndex OBJECT-TYPE
+ SYNTAX      Integer32 (1..65535)
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "A unique arbitrary index for this smonVlanStatsControlEntry."
+ ::= { smonVlanStatsControlEntry 1 }
+
+smonVlanStatsControlDataSource OBJECT-TYPE
+ SYNTAX      DataSource
+ MAX-ACCESS  read-create
+ STATUS      current
+ DESCRIPTION
+     "The source of data for this set of VLAN statistics.
+
+     This object MAY NOT be modified if the associated
+     smonVlanStatsControlStatus object is equal to active(1)."
+ ::= { smonVlanStatsControlEntry 2 }
+
+smonVlanStatsControlCreateTime OBJECT-TYPE
+ SYNTAX     LastCreateTime
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The value of sysUpTime when this control entry was last
+     activated. This object allows to a management station to
+     detect deletion and recreation cycles between polls."
+ ::= { smonVlanStatsControlEntry 3 }
+
+smonVlanStatsControlOwner OBJECT-TYPE
+ SYNTAX      OwnerString
+ MAX-ACCESS  read-create
+ STATUS      current
+ DESCRIPTION
+     "Administratively assigned named of the owner of this entry.
+     It usually defines the entity that created this entry and is
+     therefore using the resources assigned to it, though there is
+     no enforcement mechanism, nor assurance that rows created are
+     ever used."
+ ::= { smonVlanStatsControlEntry 4 }
+
+smonVlanStatsControlStatus OBJECT-TYPE
+ SYNTAX      RowStatus
+ MAX-ACCESS  read-create
+ STATUS      current
+ DESCRIPTION
+     "The status of this row.
+
+     An entry MAY NOT exist in the active state unless all
+     objects in the entry have an appropriate value.
+
+     If this object is not equal to active(1), all associated
+     entries in the smonVlanIdStatsTable SHALL be deleted."
+ ::= { smonVlanStatsControlEntry 5 }
+
+-- The VLAN Statistics Table
+
+smonVlanIdStatsTable  OBJECT-TYPE
+ SYNTAX     SEQUENCE OF SmonVlanIdStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS     current
+ DESCRIPTION
+     "Contains the VLAN statistics data.
+      The statistics collected represent a distribution based
+      on the IEEE 802.1Q VLAN-ID (VID), for each good frame
+      attributed to the data source for the collection.
+
+      This function applies the same rules for attributing frames
+      to VLAN-based collections. RMON VLAN statistics are collected
+      after the Ingress Rules defined in section 3.13 of the VLAN
+      Specification [20] are applied.
+
+      It is possible that entries in this table will be
+      garbage-collected, based on agent resources, and VLAN
+      configuration. Agents are encouraged to support all 4094
+      index values and not garbage collect this table."
+::= { smonStats 2 }
+
+smonVlanIdStatsEntry  OBJECT-TYPE
+ SYNTAX     SmonVlanIdStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS     current
+ DESCRIPTION
+     "A conceptual row in smonVlanIdStatsTable."
+ INDEX { smonVlanStatsControlIndex, smonVlanIdStatsId }
+ ::= { smonVlanIdStatsTable 1 }
+
+SmonVlanIdStatsEntry ::= SEQUENCE {
+ smonVlanIdStatsId                             Integer32,
+ smonVlanIdStatsTotalPkts                      Counter32,
+ smonVlanIdStatsTotalOverflowPkts              Counter32,
+ smonVlanIdStatsTotalHCPkts                    Counter64,
+ smonVlanIdStatsTotalOctets                    Counter32,
+ smonVlanIdStatsTotalOverflowOctets            Counter32,
+ smonVlanIdStatsTotalHCOctets                  Counter64,
+ smonVlanIdStatsNUcastPkts                     Counter32,
+ smonVlanIdStatsNUcastOverflowPkts             Counter32,
+ smonVlanIdStatsNUcastHCPkts                   Counter64,
+ smonVlanIdStatsNUcastOctets                   Counter32,
+ smonVlanIdStatsNUcastOverflowOctets           Counter32,
+ smonVlanIdStatsNUcastHCOctets                 Counter64,
+ smonVlanIdStatsCreateTime                     LastCreateTime
+}
+
+smonVlanIdStatsId OBJECT-TYPE
+ SYNTAX     Integer32 (1..4094)
+ MAX-ACCESS not-accessible
+ STATUS     current
+ DESCRIPTION
+     "The unique identifier of the VLAN monitored for
+      this specific statistics collection.
+
+     Tagged packets match the VID for the range between 1 and 4094.
+     An external RMON probe MAY detect VID=0 on an Inter Switch
+     Link, in which case the packet belongs to a VLAN determined by
+     the PVID of the ingress port. The VLAN to which such a packet
+     belongs can be determined only by a RMON probe internal to the
+     switch."
+ REFERENCE
+     "Draft Standard for Virtual Bridged Local Area Networks,
+       P802.1Q/D10, chapter 3.13"
+ ::= { smonVlanIdStatsEntry 1 }
+
+smonVlanIdStatsTotalPkts OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of packets counted on this VLAN."
+ ::= { smonVlanIdStatsEntry 2 }
+
+smonVlanIdStatsTotalOverflowPkts OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The number of times the associated smonVlanIdStatsTotalPkts
+      counter has overflowed."
+ ::= { smonVlanIdStatsEntry 3 }
+
+smonVlanIdStatsTotalHCPkts OBJECT-TYPE
+ SYNTAX     Counter64
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of packets counted on this VLAN."
+ ::= { smonVlanIdStatsEntry 4 }
+
+smonVlanIdStatsTotalOctets OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of octets counted on this VLAN."
+ ::= { smonVlanIdStatsEntry 5 }
+
+smonVlanIdStatsTotalOverflowOctets OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The number of times the associated smonVlanIdStatsTotalOctets
+      counter has overflowed."
+ ::= { smonVlanIdStatsEntry 6 }
+
+smonVlanIdStatsTotalHCOctets OBJECT-TYPE
+ SYNTAX     Counter64
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of octets counted on this VLAN."
+::= { smonVlanIdStatsEntry 7 }
+
+smonVlanIdStatsNUcastPkts OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of non-unicast packets counted on this
+      VLAN."
+ ::= { smonVlanIdStatsEntry 8 }
+
+smonVlanIdStatsNUcastOverflowPkts OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The number of times the associated smonVlanIdStatsNUcastPkts
+      counter has overflowed."
+ ::= { smonVlanIdStatsEntry 9 }
+
+smonVlanIdStatsNUcastHCPkts OBJECT-TYPE
+ SYNTAX     Counter64
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of non-unicast packets counted on
+      this VLAN."
+ ::= { smonVlanIdStatsEntry 10 }
+
+smonVlanIdStatsNUcastOctets OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of non-unicast octets counted on
+      this VLAN."
+ ::= { smonVlanIdStatsEntry 11 }
+
+smonVlanIdStatsNUcastOverflowOctets OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The number of times the associated
+      smonVlanIdStatsNUcastOctets counter has overflowed."
+ ::= { smonVlanIdStatsEntry 12 }
+
+smonVlanIdStatsNUcastHCOctets OBJECT-TYPE
+ SYNTAX     Counter64
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of Non-unicast octets counted on
+      this VLAN."
+ ::= { smonVlanIdStatsEntry 13 }
+
+smonVlanIdStatsCreateTime OBJECT-TYPE
+ SYNTAX     LastCreateTime
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The value of sysUpTime when this entry was last
+     activated. This object allows to a management station to
+     detect deletion and recreation cycles between polls."
+ ::= { smonVlanIdStatsEntry 14 }
+
+-- smonPrioStatsControlTable
+
+smonPrioStatsControlTable OBJECT-TYPE
+ SYNTAX      SEQUENCE OF SmonPrioStatsControlEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "Controls the setup of priority statistics tables.
+
+      The smonPrioStatsControlTable allows configuration of
+      collections based on the value of the 3-bit user priority
+      field encoded in the Tag Control Information (TCI) field
+      according to [19],[20].
+
+      Note that this table merely reports priority as encoded in
+      the VLAN headers, not the priority (if any) given to the
+      frame for the actual switching purposes."
+ ::= { smonStats 3 }
+
+smonPrioStatsControlEntry OBJECT-TYPE
+ SYNTAX      SmonPrioStatsControlEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "A conceptual row in the smonPrioStatsControlTable."
+ INDEX { smonPrioStatsControlIndex }
+ ::= { smonPrioStatsControlTable 1 }
+
+SmonPrioStatsControlEntry ::= SEQUENCE {
+ smonPrioStatsControlIndex                 Integer32,
+ smonPrioStatsControlDataSource           DataSource,
+ smonPrioStatsControlCreateTime       LastCreateTime,
+ smonPrioStatsControlOwner               OwnerString,
+ smonPrioStatsControlStatus                RowStatus
+}
+
+smonPrioStatsControlIndex OBJECT-TYPE
+ SYNTAX      Integer32 (1..65535)
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "A unique arbitrary index for this smonPrioStatsControlEntry."
+ ::= { smonPrioStatsControlEntry 1 }
+
+smonPrioStatsControlDataSource OBJECT-TYPE
+ SYNTAX      DataSource
+ MAX-ACCESS  read-create
+ STATUS      current
+ DESCRIPTION
+     "The source of data for this set of VLAN statistics.
+
+     This object MAY NOT be modified if the associated
+     smonPrioStatsControlStatus object is equal to active(1)."
+ ::= { smonPrioStatsControlEntry 2 }
+
+smonPrioStatsControlCreateTime OBJECT-TYPE
+ SYNTAX     LastCreateTime
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+      "The value of sysUpTime when this entry was created.
+     This object allows to a management station to
+     detect deletion and recreation cycles between polls."
+ ::= { smonPrioStatsControlEntry 3 }
+
+smonPrioStatsControlOwner OBJECT-TYPE
+ SYNTAX      OwnerString
+ MAX-ACCESS  read-create
+ STATUS      current
+ DESCRIPTION
+      "Administratively assigned named of the owner of this entry.
+     It usually defines the entity that created this entry and is
+     therefore using the resources assigned to it, though there is
+     no enforcement mechanism, nor assurance that rows created are
+     ever used."
+ ::= { smonPrioStatsControlEntry 4 }
+
+smonPrioStatsControlStatus OBJECT-TYPE
+ SYNTAX      RowStatus
+ MAX-ACCESS  read-create
+ STATUS      current
+ DESCRIPTION
+     "The status of this row.
+
+     An entry MAY NOT exist in the active state unless all
+     objects in the entry have an appropriate value.
+
+     If this object is not equal to active(1), all associated
+     entries in the smonPrioStatsTable SHALL be deleted."
+ ::= { smonPrioStatsControlEntry 5 }
+
+-- The Priority Statistics Table
+
+smonPrioStatsTable  OBJECT-TYPE
+ SYNTAX     SEQUENCE OF SmonPrioStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS     current
+ DESCRIPTION
+     "Contains the priority statistics. The collections are based
+      on the value of the 3-bit user priority field encoded in the
+      Tag Control Information (TCI) field according to [19], [20].
+      Note that this table merely reports priority as encoded in
+      the VLAN headers, not the priority (if any) given to the
+      frame for the actual switching purposes.
+
+      No garbage collection is designed for this table, as there
+      always are at most eight rows per statistical set, and the
+      low memory requirements do not justify the implementation of
+      such a mechanism."
+ ::= { smonStats 4 }
+
+smonPrioStatsEntry  OBJECT-TYPE
+ SYNTAX     SmonPrioStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS     current
+ DESCRIPTION
+     "A conceptual row in smonPrioStatsTable."
+ INDEX { smonPrioStatsControlIndex, smonPrioStatsId }
+ ::= { smonPrioStatsTable 1 }
+
+SmonPrioStatsEntry ::= SEQUENCE {
+ smonPrioStatsId                       Integer32,
+ smonPrioStatsPkts                     Counter32,
+ smonPrioStatsOverflowPkts             Counter32,
+ smonPrioStatsHCPkts                   Counter64,
+ smonPrioStatsOctets                   Counter32,
+ smonPrioStatsOverflowOctets           Counter32,
+ smonPrioStatsHCOctets                 Counter64
+}
+
+smonPrioStatsId OBJECT-TYPE
+ SYNTAX     Integer32 (0..7)
+ MAX-ACCESS not-accessible
+ STATUS     current
+ DESCRIPTION
+     "The unique identifier of the priority level monitored for
+      this specific statistics collection."
+ REFERENCE
+     " Draft Standard for Virtual Bridged Local Area Networks,
+       P802.1Q/D10, chapter 4.3.2.1"
+ ::= { smonPrioStatsEntry 1 }
+
+smonPrioStatsPkts OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of packets counted on
+      this priority level."
+ ::= { smonPrioStatsEntry 2 }
+
+smonPrioStatsOverflowPkts OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The number of times the associated smonPrioStatsPkts
+      counter has overflowed."
+ ::= { smonPrioStatsEntry 3 }
+
+smonPrioStatsHCPkts OBJECT-TYPE
+ SYNTAX     Counter64
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of packets counted on
+      this priority level."
+ ::= { smonPrioStatsEntry 4 }
+
+smonPrioStatsOctets OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of octets counted on
+      this priority level."
+ ::= { smonPrioStatsEntry 5 }
+
+smonPrioStatsOverflowOctets OBJECT-TYPE
+ SYNTAX     Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The number of times the associated smonPrioStatsOctets
+      counter has overflowed."
+ ::= { smonPrioStatsEntry 6 }
+
+smonPrioStatsHCOctets OBJECT-TYPE
+ SYNTAX     Counter64
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS     current
+ DESCRIPTION
+     "The total number of octets counted on
+      this priority level."
+ ::= { smonPrioStatsEntry 7 }
+
+portCopyTable  OBJECT-TYPE
+ SYNTAX      SEQUENCE OF PortCopyEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     " Port Copy provides the ability to copy all frames from a
+      specified source to specified destination within a switch.
+      Source and destinations MUST be ifEntries, as defined by [22].
+      One to one, one to many, many to one and many to many source to
+      destination relationships may be configured.
+
+      Applicable counters on the destination will increment for all
+      packets transiting the port, be it by normal bridging/switching
+      or due to packet copy.
+      Note that this table manages no RMON data collection by itself,
+      and an agent may possibly implement no RMON objects except
+      objects related to the port copy operation defined by the
+      portCopyCompliance conformance macro. That allows for a switch
+      with no other embedded RMON capability to perform port copy
+      operations to a destination port at which a different external
+      RMON probe is connected.
+
+      One to one, many to one and one to many source to destination
+      relationships may be configured.
+
+      Each row that exists in this table defines such a
+      relationship. By disabling a row in this table the port copy
+      relationship no longer exists.
+
+      The number of entries and the types of port copies (1-1,
+      many-1, 1-many) are implementation specific and could
+      possibly be dynamic due to changing resource availability.
+
+      In order to configure a source to destination portCopy
+      relationship, both source and destination interfaces MUST be
+      present as an ifEntry in the ifTable and their respective
+      ifAdminStatus and ifOperStatus values MUST be equal to
+      'up(1)'. If the value of any of those two objects changes
+      after the portCopyEntry is activated, portCopyStatus will
+      transition to 'notReady(3)'.
+
+      The capability of an interface to be source or destination of
+      a port copy operation is described by the 'copySourcePort(0)'
+      and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits
+      SHOULD be appropriately set by the agent, in order to allow
+      for a portCopyEntry to be created.
+
+      Applicable counters on the destination will increment for all
+      packets transmitted, be it by normal bridging/switching or
+      due to packet copy."
+::= { portCopyConfig 1 }
+
+portCopyEntry  OBJECT-TYPE
+ SYNTAX      PortCopyEntry
+ MAX-ACCESS  not-accessible
+ STATUS      current
+ DESCRIPTION
+     "Describes a particular port copy entry."
+INDEX { portCopySource, portCopyDest }
+::= { portCopyTable 1 }
+
+PortCopyEntry ::= SEQUENCE {
+     portCopySource
+             InterfaceIndex,
+     portCopyDest
+             InterfaceIndex,
+     portCopyDestDropEvents
+             Counter32,
+     portCopyDirection
+             INTEGER,
+     portCopyStatus
+             RowStatus
+     }
+
+portCopySource OBJECT-TYPE
+ SYNTAX       InterfaceIndex
+ MAX-ACCESS   not-accessible
+ STATUS       current
+ DESCRIPTION
+     "The ifIndex of the source which will have all packets
+      redirected to the destination as defined by portCopyDest."
+ ::= { portCopyEntry 1 }
+
+portCopyDest OBJECT-TYPE
+ SYNTAX       InterfaceIndex
+ MAX-ACCESS   not-accessible
+ STATUS       current
+ DESCRIPTION
+     "Defines the ifIndex destination for the copy operation."
+ ::= { portCopyEntry 2 }
+
+portCopyDestDropEvents OBJECT-TYPE
+ SYNTAX       Counter32
+ UNITS "events"
+ MAX-ACCESS   read-only
+ STATUS       current
+ DESCRIPTION
+      "The total number of events in which port copy packets were
+      dropped by the switch at the destination port due to lack of
+      resources.
+
+      Note that this number is not necessarily the number of
+      packets dropped; it is just the number of times this
+      condition has been detected.
+
+      A single dropped event counter is maintained for each
+      portCopyDest. Thus all instances associated with a given
+      portCopyDest will have the same portCopyDestDropEvents
+      value."
+  ::= { portCopyEntry 3 }
+
+portCopyDirection OBJECT-TYPE
+ SYNTAX       INTEGER {
+     copyRxOnly(1),
+     copyTxOnly(2),
+     copyBoth(3)
+ }
+ MAX-ACCESS   read-create
+ STATUS       current
+ DESCRIPTION
+     "This object affects the way traffic is copied from a switch
+       source port, for the indicated port copy operation.
+
+      If this object has the value 'copyRxOnly(1)', then only
+      traffic received on the indicated source port will be copied
+      to the indicated destination port.
+
+      If this object has the value 'copyTxOnly(2)', then only
+      traffic transmitted out the indicated source port will be
+      copied to the indicated destination port.
+
+      If this object has the value 'copyBoth(3)', then all traffic
+      received or transmitted on the indicated source port will be
+      copied to the indicated destination port.
+
+      The creation and deletion of instances of this object is
+      controlled by the portCopyRowStatus object. Note that there
+      is no guarantee that changes in the value of this object
+      performed while the associated portCopyRowStatus object is
+      equal to active will not cause traffic discontinuities in the
+      packet stream."
+DEFVAL { copyBoth }
+::= { portCopyEntry 4 }
+
+portCopyStatus OBJECT-TYPE
+ SYNTAX       RowStatus
+ MAX-ACCESS   read-create
+ STATUS       current
+ DESCRIPTION
+     "Defines the status of the port copy entry.
+
+      In order to configure a source to destination portCopy
+      relationship, both source and destination interfaces MUST be
+      present as an ifEntry in the ifTable and their respective
+      ifAdminStatus and ifOperStatus values MUST be equal to
+      'up(1)'. If the value of any of those two objects changes
+      after the portCopyEntry is activated, portCopyStatus will
+      transition to 'notReady(3)'.
+
+      The capability of an interface to be source or destination of
+      a port copy operation is described by the 'copySourcePort(0)'
+      and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits
+      SHOULD be appropriately set by the agent, in order to allow
+      for a portCopyEntry to be created."
+ ::= { portCopyEntry 5 }
+
+-- smonRegistrationPoints
+-- defines a set of OIDs for registration purposes of entities
+-- supported by the SMON MIB.
+
+smonVlanDataSource
+
+      OBJECT IDENTIFIER ::= { smonRegistrationPoints 1}
+
+-- Defined for use as an SmonDataSource. A single integer parameter
+-- is appended to the end of this OID when actually encountered in
+-- the dataSourceCapsTable, which represents a positive, non-zero
+-- VLAN identifier value.
+
+-- Conformance Macros
+
+smonMIBCompliances      OBJECT IDENTIFIER ::= { rmonConformance 3}
+smonMIBGroups           OBJECT IDENTIFIER ::= { rmonConformance 4}
+
+smonMIBCompliance       MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+     "Describes the requirements for full conformance with the SMON
+     MIB"
+     MODULE -- this module
+     MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                       smonVlanStatsGroup,
+                                       smonPrioStatsGroup,
+                                       portCopyConfigGroup,
+                                       smonInformationGroup}
+
+     GROUP         smonHcTo100mbGroup
+     DESCRIPTION
+     "This group of VLAN statistics counter are mandatory only for
+      those network interfaces for which the corresponding ifSpeed
+      can be greater than 10MB/sec and less than or equal to
+      100MB/sec."
+
+     GROUP         smonHc100mbPlusGroup
+     DESCRIPTION
+     "This group of VLAN statistics counters are mandatory only for
+      those network interfaces for which the corresponding ifSpeed
+      can be more than 100MB/sec. This group of VLAN statistics is
+      also mandatory for smonDataSources of type VLAN or
+      entPhysicalEntry."
+::= { smonMIBCompliances 1 }
+
+smonMIBVlanStatsCompliance        MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+     "Describes the requirements for conformance with the SMON MIB
+      with support for VLAN Statistics. Mandatory for a SMON probe
+      in environment where IEEE 802.1Q bridging is implemented."
+     MODULE -- this module
+
+     MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                       smonVlanStatsGroup,
+                                       smonInformationGroup}
+     GROUP         hcVlanTo100mbGroup
+     DESCRIPTION
+     "This group of VLAN statistics counter are mandatory only
+      for those network interfaces for which the corresponding
+      ifSpeed can be up to and including 100MB/sec."
+
+     GROUP         hcVlan100mbPlusGroup
+     DESCRIPTION
+     "This group of VLAN statistics counters are mandatory only for
+      those network interfaces for which the corresponding ifSpeed
+      is greater than 100MB/sec. This group of VLAN statistics is
+      also mandatory for smonDataSources of type VLAN or
+      entPhysicalEntry."
+::= { smonMIBCompliances 2 }
+
+smonMIBPrioStatsCompliance         MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+     "Describes the requirements for conformance with the SMON MIB
+      with support for priority level Statistics. Mandatory for a
+      SMON probe in a environment where IEEE 802.1p
+      priority-switching is implemented."
+     MODULE -- this module
+     MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                       smonPrioStatsGroup,
+                                       smonInformationGroup}
+
+     GROUP         hcPrioTo100mbGroup
+     DESCRIPTION
+     "This group of VLAN priority statistics counters are mandatory
+      only for those network interfaces for which the corresponding
+      ifSpeed can be up to and including 100MB/sec."
+
+     GROUP         hcPrio100mbPlusGroup
+     DESCRIPTION
+     "This group is mandatory only for those network
+      interfaces for which the corresponding ifSpeed is greater
+      than 100MB/sec. This group of VLAN priority
+      statistics is also mandatory for smonDataSources of type
+      VLAN or entPhysicalEntry"
+::= { smonMIBCompliances 3 }
+
+portCopyCompliance                 MODULE-COMPLIANCE
+     STATUS      current
+     DESCRIPTION
+     "Describes the requirements for conformance with the port copy
+      functionality defined by the SMON MIB"
+     MODULE  -- this module
+     MANDATORY-GROUPS                 {dataSourceCapsGroup,
+                                       portCopyConfigGroup,
+                                       smonInformationGroup}
+      ::= { smonMIBCompliances 4}
+
+dataSourceCapsGroup     OBJECT-GROUP
+     OBJECTS          { dataSourceRmonCaps,
+                       dataSourceCopyCaps,
+                       dataSourceCapsIfIndex}
+     STATUS      current
+     DESCRIPTION
+     "Defines the objects that describe the capabilities of RMON
+      data sources."
+::= {smonMIBGroups 1 }
+
+smonVlanStatsGroup      OBJECT-GROUP
+     OBJECTS         { smonVlanStatsControlDataSource,
+                      smonVlanStatsControlCreateTime,
+                      smonVlanStatsControlOwner,
+                      smonVlanStatsControlStatus,
+                      smonVlanIdStatsTotalPkts,
+                      smonVlanIdStatsTotalOctets,
+                      smonVlanIdStatsNUcastPkts,
+                      smonVlanIdStatsCreateTime}
+     STATUS      current
+     DESCRIPTION
+     "Defines the switch monitoring specific statistics - per VLAN
+      Id on interfaces of 10MB or less."
+::= { smonMIBGroups 2 }
+
+smonPrioStatsGroup      OBJECT-GROUP
+     OBJECTS         { smonPrioStatsControlDataSource,
+                      smonPrioStatsControlCreateTime,
+                      smonPrioStatsControlOwner,
+                      smonPrioStatsControlStatus,
+                      smonPrioStatsPkts,
+                      smonPrioStatsOctets}
+     STATUS      current
+     DESCRIPTION
+     "Defines the switch monitoring specific statistics - per VLAN
+      Id on interface."
+::= { smonMIBGroups 3 }
+
+smonHcTo100mbGroup        OBJECT-GROUP
+     OBJECTS         { smonVlanIdStatsTotalOverflowOctets,
+                      smonVlanIdStatsTotalHCOctets,
+                      smonPrioStatsOverflowOctets,
+                      smonPrioStatsHCOctets}
+     STATUS      current
+     DESCRIPTION
+     "Defines the additional high capacity statistics needed to be
+      kept on interfaces with ifSpeed greater than 10MB/sec and
+      less than or equal to 100MB/sec."
+::= { smonMIBGroups 4 }
+
+smonHc100mbPlusGroup      OBJECT-GROUP
+     OBJECTS         { smonVlanIdStatsTotalOverflowPkts,
+                      smonVlanIdStatsTotalHCPkts,
+                      smonVlanIdStatsTotalOverflowOctets,
+                      smonVlanIdStatsTotalHCOctets,
+                      smonVlanIdStatsNUcastOverflowPkts,
+                      smonVlanIdStatsNUcastHCPkts,
+                      smonPrioStatsOverflowPkts,
+                      smonPrioStatsHCPkts,
+                      smonPrioStatsOverflowOctets,
+                      smonPrioStatsHCOctets}
+     STATUS      current
+     DESCRIPTION
+     "Defines the additional high capacity statistics needed to be
+      kept on interfaces with ifSpeed of more than 100MB/sec. These
+      statistics MUST also be kept on smonDataSources of type VLAN
+      or entPhysicalEntry."
+::= { smonMIBGroups 5 }
+
+hcVlanTo100mbGroup        OBJECT-GROUP
+     OBJECTS         { smonVlanIdStatsTotalOverflowOctets,
+                      smonVlanIdStatsTotalHCOctets}
+     STATUS      current
+     DESCRIPTION
+     "Defines the additional high capacity VLAN statistics
+      needed to be kept on interfaces with ifSpeed greater than
+      10MB/sec and less than or equal to 100MB/sec."
+::= { smonMIBGroups 6 }
+
+hcVlan100mbPlusGroup      OBJECT-GROUP
+     OBJECTS         { smonVlanIdStatsTotalOverflowPkts,
+                      smonVlanIdStatsTotalHCPkts,
+                      smonVlanIdStatsTotalOverflowOctets,
+                      smonVlanIdStatsTotalHCOctets,
+                      smonVlanIdStatsNUcastOverflowPkts,
+                      smonVlanIdStatsNUcastHCPkts}
+     STATUS      current
+     DESCRIPTION
+     "Defines the additional high capacity VLAN statistics
+      needed to be kept on interfaces with ifSpeed of more than
+      100MB/sec.  These statistics MUST also be kept on
+      smonDataSources of type VLAN or entPhysicalEntry."
+::= { smonMIBGroups 7 }
+
+hcPrioTo100mbGroup        OBJECT-GROUP
+     OBJECTS         { smonPrioStatsOverflowOctets,
+                      smonPrioStatsHCOctets }
+     STATUS      current
+     DESCRIPTION
+     "Defines the additional high capacity VLAN priority
+      statistics needed to be kept on interfaces with
+      ifSpeed of greater than 10MB/sec and less than or equal
+      to 100MB/sec."
+::= { smonMIBGroups 8 }
+
+hcPrio100mbPlusGroup      OBJECT-GROUP
+     OBJECTS         { smonPrioStatsOverflowPkts,
+                      smonPrioStatsHCPkts,
+                      smonPrioStatsOverflowOctets,
+                      smonPrioStatsHCOctets}
+     STATUS      current
+     DESCRIPTION
+     "Defines the additional high capacity VLAN priority
+      statistics needed to be kept on interfaces with
+      ifSpeed of greater than 100MB/sec. These statistics MUST
+      also be kept on smonDataSources of type VLAN or
+      entPhysicalEntry."
+::= { smonMIBGroups 9 }
+
+smonVlanStatsExtGroup   OBJECT-GROUP
+     OBJECTS         {smonVlanIdStatsNUcastOctets,
+                      smonVlanIdStatsNUcastOverflowOctets,
+                      smonVlanIdStatsNUcastHCOctets}
+     STATUS      current
+     DESCRIPTION
+     "Defines the switch monitoring specific statistics for systems
+      capable of counting non-unicast octets for a given dataSource
+      (as described in the dataSourceRmonCaps object)."
+::= { smonMIBGroups 10 }
+
+smonInformationGroup    OBJECT-GROUP
+     OBJECTS         { smonCapabilities }
+     STATUS      current
+     DESCRIPTION
+     "An indication of the SMON capabilities supported by this
+     agent."
+::= { smonMIBGroups 11 }
+
+portCopyConfigGroup     OBJECT-GROUP
+     OBJECTS         { portCopyDestDropEvents,
+                       portCopyDirection,
+                       portCopyStatus
+                     }
+     STATUS      current
+     DESCRIPTION
+     "Defines the control objects for copy port operations."
+::= { smonMIBGroups 12 }
+
+END
diff --git a/snmp_builder/mibs/SMUX-MIB.mib b/snmp_builder/mibs/SMUX-MIB.mib
new file mode 100644
index 0000000..593a6f7
--- /dev/null
+++ b/snmp_builder/mibs/SMUX-MIB.mib
@@ -0,0 +1,160 @@
+SMUX-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        enterprises
+                FROM RFC1155-SMI
+        DisplayString
+                FROM RFC1213-MIB
+        OBJECT-TYPE
+                FROM RFC1212;
+
+unix    OBJECT IDENTIFIER ::= { enterprises 4 }
+
+smux    OBJECT IDENTIFIER ::= { unix 4 }
+
+smuxPeerTable   OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SmuxPeerEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "The SMUX peer table."
+        ::= { smux 1 }
+
+smuxPeerEntry   OBJECT-TYPE
+        SYNTAX  SmuxPeerEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "An entry in the SMUX peer table."
+        INDEX   { smuxPindex }
+        ::= { smuxPeerTable 1}
+
+SmuxPeerEntry ::=
+    SEQUENCE {
+        smuxPindex
+            INTEGER,
+        smuxPidentity
+            OBJECT IDENTIFIER,
+        smuxPdescription
+            DisplayString,
+        smuxPstatus
+            INTEGER
+    }
+
+smuxPindex      OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "An index which uniquely identifies a SMUX peer."
+        ::= { smuxPeerEntry 1 }
+
+smuxPidentity   OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The authoritative designation for a SMUX peer."
+        ::= { smuxPeerEntry 2 }
+
+smuxPdescription OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A human-readable description of a SMUX peer."
+        ::= { smuxPeerEntry 3 }
+
+smuxPstatus     OBJECT-TYPE
+        SYNTAX  INTEGER { valid(1), invalid(2), connecting(3) }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The type of SMUX peer.
+
+            Setting this object to the value invalid(2) has
+            the effect of invaliding the corresponding entry
+            in the smuxPeerTable.  It is an implementation-
+            specific matter as to whether the agent removes an
+            invalidated entry from the table.  Accordingly,
+            management stations must be prepared to receive
+            tabular information from agents that correspond to
+            entries not currently in use.  Proper
+            interpretation of such entries requires
+            examination of the relative smuxPstatus object."
+        ::= { smuxPeerEntry 4 }
+
+smuxTreeTable   OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SmuxTreeEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "The SMUX tree table."
+        ::= { smux 2 }
+
+smuxTreeEntry   OBJECT-TYPE
+        SYNTAX  SmuxTreeEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "An entry in the SMUX tree table."
+        INDEX   { smuxTsubtree, smuxTpriority }
+        ::= { smuxTreeTable 1}
+
+SmuxTreeEntry ::=
+    SEQUENCE {
+        smuxTsubtree
+            OBJECT IDENTIFIER,
+        smuxTpriority
+            INTEGER,
+        smuxTindex
+            INTEGER,
+        smuxTstatus
+            INTEGER
+    }
+
+smuxTsubtree    OBJECT-TYPE
+        SYNTAX  OBJECT IDENTIFIER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The MIB subtree being exported by a SMUX peer."
+        ::= { smuxTreeEntry 1 }
+
+smuxTpriority OBJECT-TYPE
+        SYNTAX  INTEGER (0..'7fffffff'h)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The SMUX peer's priority when exporting the MIB
+            subtree."
+        ::= { smuxTreeEntry 2 }
+
+smuxTindex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The SMUX peer's identity."
+        ::= { smuxTreeEntry 3 }
+
+smuxTstatus     OBJECT-TYPE
+        SYNTAX  INTEGER { valid(1), invalid(2) }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The type of SMUX tree.
+
+            Setting this object to the value invalid(2) has
+            the effect of invaliding the corresponding entry
+            in the smuxTreeTable.  It is an implementation-
+            specific matter as to whether the agent removes an
+            invalidated entry from the table.  Accordingly,
+            management stations must be prepared to receive
+            tabular information from agents that correspond to
+            entries not currently in use.  Proper
+            interpretation of such entries requires
+            examination of the relative smuxTstatus object."
+        ::= { smuxTreeEntry 4 }
+
+END
diff --git a/snmp_builder/mibs/SNA-NAU-MIB.mib b/snmp_builder/mibs/SNA-NAU-MIB.mib
new file mode 100644
index 0000000..bad95f1
--- /dev/null
+++ b/snmp_builder/mibs/SNA-NAU-MIB.mib
@@ -0,0 +1,2765 @@
+SNA-NAU-MIB DEFINITIONS ::= BEGIN
+
+-- This MIB module contains objects necessary
+-- for management of the following SNA devices: PU types 1.0, 2.0, 2.1
+-- and LU types 0, 1, 2, 3, 4, 7.  It also contains generic objects
+-- which can be used to manage LU 6.2.
+
+-- Naming conventions in this document:
+-- The following names are used in object descriptors according to
+-- SNA conventions.
+-- The name 'PU' or 'Node' is used to describe Node type 1.0, 2.0 or
+-- 2.1.
+-- The name 'LU' is used to describe Logical Unit of type 0,1,2,3,
+-- 4,7 or 6.2.
+
+IMPORTS
+        DisplayString, RowStatus, TimeStamp, InstancePointer
+                FROM SNMPv2-TC
+
+        Counter32, Gauge32, Integer32, mib-2,
+        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+                FROM SNMPv2-SMI
+
+        MODULE-COMPLIANCE, OBJECT-GROUP
+                FROM SNMPv2-CONF;
+
+snanauMIB MODULE-IDENTITY
+        LAST-UPDATED  "9405120900Z"
+        ORGANIZATION  "IETF SNA NAU MIB Working Group"
+        CONTACT-INFO
+                "       Zbigniew Kielczewski
+                        Eicon Technology Inc.
+                        2196 32nd Avenue
+                        Lachine, Que  H8T 3H7
+                        Canada
+                        Tel:    1 514 631 2592
+                        E-mail: zbig@eicon.qc.ca
+
+                        Deirdre Kostick
+                        Bellcore
+                        331 Newman Springs Road
+                        Red Bank, NJ 07701
+                        Tel:    1 908 758 2642
+
+                        E-mail: dck2@mail.bellcore.com
+
+                        Kitty Shih (editor)
+                        Novell
+                        890 Ross Drive
+                        Sunnyvale, CA 94089
+                        Tel:   1 408 747 4305
+                        E-mail: kmshih@novell.com"
+        DESCRIPTION
+                "This is the MIB module for objects used to
+                 manage SNA devices."
+::= { mib-2 34 }
+
+-- The SNANAU MIB module contains an objects part and a conformance part.
+-- Objects are organized into the following groups:
+-- (1)snaNode group,
+-- (2)snaLU group,
+-- (3)snaMgtTools group.
+
+snanauObjects   OBJECT IDENTIFIER ::= { snanauMIB 1 }
+
+  snaNode       OBJECT IDENTIFIER ::= { snanauObjects 1 }
+  snaLu         OBJECT IDENTIFIER ::= { snanauObjects 2 }
+  snaMgtTools   OBJECT IDENTIFIER ::= { snanauObjects 3}
+
+-- ***************************************************************
+-- snaNode group
+--
+-- It contains Managed Objects related to any type of Node and
+-- some specific objects for Node Type 2.0.
+-- ***************************************************************
+
+-- ***************************************************************
+-- The following table contains generic Node configuration
+-- parameters.
+-- ***************************************************************
+
+snaNodeAdminTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SnaNodeAdminEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This table contains objects which describe the
+                configuration parameters for an SNA Node.  Link
+                specific configuration objects are contained in
+                a separate MIB module (e.g., SNA DLC MIB)
+
+                corresponding to the link type.
+                The table snaNodeAdminLinkTable contains objects
+                which identify the relationship between node instances
+                and link instances.
+
+                The entries (i.e., rows) in this table can be created
+                by either an Agent or a Management Station.
+                The Management Station can do this through setting
+                the appropriate value in the snaNodeAdminRowStatus.
+
+                The snaNodeAdminRowStatus object describes the
+                status of an entry and is used to change the status
+                of an entry.  The entry is deleted by an Agent based
+                on the value of the snaNodeAdminRowStatus.
+
+                The snaNodeAdminState object describes the desired
+                operational state of a Node and is used to change the
+                operational state of a Node.  For example, such
+                information may be obtained from a configuration file.
+
+                How an Agent or a Management Station obtains the
+                initial value of each object at creation time is an
+                implementation specific issue.
+
+                For each entry in this table, there is a corresponding
+                entry in the snaNodeOperTable.
+                While the objects in this table describe the desired
+                or configured operational values of the SNA Node, the
+                actual runtime values are contained in
+                snaNodeOperTable."
+        ::= { snaNode 1 }
+
+snaNodeAdminEntry OBJECT-TYPE
+        SYNTAX  SnaNodeAdminEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "An entry contains the configuration parameters for
+                one SNA Node instance. The objects in the entry
+                have read-create access.
+                An entry can be created, modified or deleted.  The
+                object snaNodeAdminRowStatus is used (i.e., set) to
+                create or delete a row entry."
+        INDEX  { snaNodeAdminIndex }
+        ::= { snaNodeAdminTable 1 }
+
+SnaNodeAdminEntry ::= SEQUENCE {
+        snaNodeAdminIndex
+
+                Integer32,
+        snaNodeAdminName
+                DisplayString,
+        snaNodeAdminType
+                INTEGER,
+        snaNodeAdminXidFormat
+                INTEGER,
+        snaNodeAdminBlockNum
+                DisplayString,
+        snaNodeAdminIdNum
+                DisplayString,
+        snaNodeAdminEnablingMethod
+                INTEGER,
+        snaNodeAdminLuTermDefault
+                INTEGER,
+        snaNodeAdminMaxLu
+                Integer32,
+        snaNodeAdminHostDescription
+                DisplayString,
+        snaNodeAdminStopMethod
+                INTEGER,
+        snaNodeAdminState
+                INTEGER,
+        snaNodeAdminRowStatus
+                RowStatus
+        }
+
+snaNodeAdminIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "Index used to uniquely identify each Node instance.
+                If an Agent creates the entry, then it will assign
+                this number otherwise a Management Station
+                generates a random number when it reserves the
+                entry for creation."
+        ::= { snaNodeAdminEntry 1 }
+
+snaNodeAdminName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..17))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the desired name of the
+                Node for use during Node activation.
+                In Type 2.1 networks, this is a fully-qualified name,
+                meaning that the Node name is preceded by the NetId (if
+
+                present) with a period as the delimiter.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaNodeOperName until the Node has
+                been re-activated (e.g., after the next initialization
+                of the SNA services)."
+        ::= { snaNodeAdminEntry 2 }
+
+snaNodeAdminType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                other(1),
+                pu10(2),
+                pu20(3),
+                t21len(4),
+                endNode(5),
+                networkNode(6)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the type of SNA Node.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaNodeOperType until the Node has
+                been re-activated (e.g., after the next initialization
+                of the SNA services)."
+        ::= { snaNodeAdminEntry 3 }
+
+snaNodeAdminXidFormat OBJECT-TYPE
+        SYNTAX  INTEGER  {
+                format0(1),
+                format1(2),
+                format3(3)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the type of XID format used for
+                this Node.  Note that there is no format type 2.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaNodeOperAdminXidFormat until the Node has
+                been re-activated (e.g., after the next initialization
+                of the SNA services)."
+        ::= { snaNodeAdminEntry 4 }
+
+snaNodeAdminBlockNum OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(3))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the block number for this Node
+                instance.  It is the first 3 hexadecimal digits of the
+                SNA Node id.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaNodeOperBlockNum until the Node has
+                been re-activated (e.g., after the next initialization
+                of the SNA services)."
+        ::= { snaNodeAdminEntry 5 }
+
+snaNodeAdminIdNum OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(5))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the ID number for this Node
+                instance.  This is the last 5 hexadecimal digits of
+                the SNA Node id.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaNodeOperIdNum until the Node has
+                been re-activated (e.g., after the next initialization
+                of the SNA services)."
+        ::= { snaNodeAdminEntry 6 }
+
+snaNodeAdminEnablingMethod OBJECT-TYPE
+        SYNTAX  INTEGER {
+                other (1),
+                startup (2),
+                demand (3),
+                onlyMS (4)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value indicates how the Node should be
+                activated for the first time.
+                The values have the following meanings:
+
+                other (1)  - may be used for proprietary methods
+                   not listed in this enumeration,
+                startup (2) - at SNA services' initialization time
+                   (this is the default),
+                demand (3) - only when LU is requested by application,
+                             or
+                onlyMS (4) - by a Management Station only.
+
+                A  write operation to this object may immediately
+                change the operational value reflected
+                in snaNodeOperEnablingMethod depending
+                on the Agent implementation.  If the Agent
+                implementation accepts immediate changes, then the
+                behavior of the Node changes immediately and not only
+                after the next system startup of the SNA services.
+                An immediate change may only apply when the
+                current value 'demand (3)' is changed to 'onlyMS (4)'
+                and vice versa."
+          ::= { snaNodeAdminEntry 7 }
+
+snaNodeAdminLuTermDefault OBJECT-TYPE
+        SYNTAX  INTEGER {
+                unbind (1),
+                termself (2),
+                rshutd (3),
+                poweroff(4)
+                }
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                "The value indicates the desired default method
+                used to deactivate LUs for this Node
+                For LU6.2s, 'unbind(1)' is the only valid value.
+
+                unbind(1) -   terminate the LU-LU session by sending
+                        an SNA UNBIND request.
+                termself(2) - terminate the LU-LU session by sending
+                        an SNA TERM-SELF (Terminate Self) request on
+                        the SSCP-LU session. The SSCP will inform the
+                        remote session LU partner to send an UNBIND
+                        request to terminate the session.
+                rshutd(3) -   terminate the LU-LU session by sending
+                        an SNA RSHUTD (Request ShutDown) request to
+                        the remote session LU partner. The remote LU
+                        will then send an UNBIND request to terminate
+                        the session.
+                poweroff(4) - terminate the LU-LU session by sending
+                        either an SNA LUSTAT (LU Status) request on
+                        the LU-LU session or an SNA NOTIFY request on
+                        the SSCP-LU session indicating that the LU has
+
+                        been powered off. Sending both is also
+                        acceptable. The result should be that the
+                        remote session LU partner will send an UNBIND
+                        to terminate the session.
+
+                The default behavior indicated by the value of this
+                object may be overridden for an LU instance. The
+                override is performed by setting the snaLuAdminTerm
+                object instance in the snaLuAdminTable to the desired
+                value.
+
+                A write operation to this object may immediately
+                change the operational value reflected
+                in snaNodeOperLuTermDefault depending
+                on the Agent implementation."
+          ::= { snaNodeAdminEntry 8 }
+
+snaNodeAdminMaxLu OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The maximum number of LUs that may be
+                activated for this Node. For PU2.1, this object
+                refers to the number of dependent LUs.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaNodeOperMaxLu until the Node has
+                been re-activated (e.g., after the next initialization
+                of the SNA services)."
+          ::= { snaNodeAdminEntry 9 }
+
+snaNodeAdminHostDescription OBJECT-TYPE
+          SYNTAX  DisplayString (SIZE(0..128))
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                  "The value identifies the remote host associated
+                  with this Node.
+                  Since SSCP Id's may not be unique
+                  across hosts, the host description
+                  is required to uniquely identify the SSCP.
+                  This object is only applicable to PU2.0 type
+                  Nodes. If the remote host is unknown, then the
+                  value is the null string.
+
+                  A write operation to this object may immediately
+
+                  change the operational value reflected
+                  in snaNodeOperHostDescription depending
+                  on the Agent implementation."
+          ::= { snaNodeAdminEntry 10 }
+
+snaNodeAdminStopMethod OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  other (1),
+                  normal (2),
+                  immed (3),
+                  force (4)
+                  }
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                  "The value indicates the desired method to be used
+                  by the Agent to stop a Node (i.e., change the Node's
+                  operational state to inactive(1) ).
+
+                  The values have the following meaning:
+
+                  other (1) - used for proprietary
+                        methods not listed in this enumeration.
+                  normal(2) - deactivate only when there is no more
+                        activity on this Node (i.e., all data flows
+                        have been completed and all sessions
+                        have been terminated).
+                  immed(3)  - deactivate immediately regardless of
+                        current activities on this Node. Wait for
+                        deactivation responses (from remote Node)
+                        before changing the Node state to inactive.
+                  force(4)  - deactivate immediately regardless of
+                        current activities on this Node. Do not wait
+                        for deactivation responses (from remote Node)
+                        before changing the Node state to inactive.
+
+                  A write operation to this object may immediately
+                  change the operational value reflected
+                  in snaNodeOperStopMethod depending
+                  on the Agent implementation."
+          ::= { snaNodeAdminEntry 11 }
+
+snaNodeAdminState OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  inactive (1),
+                  active (2)
+                  }
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                  "The value indicates the desired operational
+                   state of the SNA Node. This object is used
+                   by the Management Station to
+                   activate or deactivate the Node.
+
+                  If the current value in snaNodeOperState is
+                  'active (2)', then setting this object to
+                  'inactive (1)' will initiate the Node shutdown
+                  process using the method indicated
+                  by snaNodeOperStopMethod.
+
+                  If the current value in snaNodeOperState is
+                  'inactive (1)', then setting this object to
+                  'active (2)' will initiate the
+                  Node's activation.
+
+                  A Management Station can always set this object to
+                  'active (2)' irrespective of the value in the
+                  snaOperEnablingMethod."
+          ::= { snaNodeAdminEntry 12 }
+
+snaNodeAdminRowStatus OBJECT-TYPE
+          SYNTAX  RowStatus
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                  "This object is used by a Management Station to
+                  create or delete the row entry in the
+                  snaNodeAdminTable following
+                  the RowStatus textual convention.
+
+                  Upon successful creation of
+                  the row, an Agent automatically creates a
+                  corresponding entry in the snaNodeOperTable with
+                  snaNodeOperState equal to 'inactive (1)'.
+
+                  Row deletion can be Management Station or Agent
+                  initiated:
+                  (a) The Management Station can set the value to
+                  'destroy (6)' only when the value of
+                  snaNodeOperState of this Node instance is
+                  'inactive (1)'. The Agent will then delete the rows
+                  corresponding to this Node instance from the
+                  snaNodeAdminTable and the snaNodeOperTable.
+                  (b) The Agent detects that a row is in the
+                  'notReady (3)' state for greater than a
+
+                  default period of 5 minutes.
+                  (c) All rows with the snaNodeAdminRowStatus object's
+                  value of 'notReady (3)' will be removed upon the
+                  next initialization of the SNA services."
+          ::= { snaNodeAdminEntry 13 }
+
+-- ***************************************************************
+-- The following object is updated when there is a change to
+-- the value of any object in the snaNodeAdminTable.
+-- ***************************************************************
+
+snaNodeAdminTableLastChange OBJECT-TYPE
+          SYNTAX  TimeStamp
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value indicates the timestamp
+                  (e.g., the Agent's sysUpTime value) of the last
+                  change made to any object in the snaNodeAdminTable,
+                  including row deletions/additions (e.g., changes to
+                  snaNodeAdminRowStatus values).
+
+                  This object can be used to reduce frequent
+                  retrievals of the snaNodeAdminTable by a Management
+                  Station. It is expected that a Management Station
+                  will periodically poll this object and compare its
+                  current value with the previous one. A difference
+                  indicates that some Node configuration information
+                  has been changed. Only then will the Management
+                  Station retrieve the entire table."
+          ::= { snaNode 2 }
+
+-- ***************************************************************
+-- The following table contains Node operational parameters.
+-- ***************************************************************
+
+snaNodeOperTable OBJECT-TYPE
+          SYNTAX  SEQUENCE OF SnaNodeOperEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "This table contains the dynamic parameters which
+                  have read-only access. These objects reflect the
+                  actual status of the Node. The entries in this
+                  table cannot be created or modified by a
+                  Management Station.
+
+                  This table augments the snaNodeAdminTable."
+          ::= { snaNode 3 }
+
+snaNodeOperEntry OBJECT-TYPE
+          SYNTAX  SnaNodeOperEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "The entry contains parameters which describe the
+                  state of one Node. The entries are created by the
+                  Agent. They have read-only access."
+          AUGMENTS   { snaNodeAdminEntry }
+          ::= { snaNodeOperTable 1 }
+
+SnaNodeOperEntry ::= SEQUENCE {
+          snaNodeOperName
+                  DisplayString,
+          snaNodeOperType
+                  INTEGER,
+          snaNodeOperXidFormat
+                  INTEGER,
+          snaNodeOperBlockNum
+                  DisplayString,
+          snaNodeOperIdNum
+                  DisplayString,
+          snaNodeOperEnablingMethod
+                  INTEGER,
+          snaNodeOperLuTermDefault
+                  INTEGER,
+          snaNodeOperMaxLu
+                  Integer32,
+          snaNodeOperHostDescription
+                  DisplayString,
+          snaNodeOperStopMethod
+                  INTEGER,
+          snaNodeOperState
+                  INTEGER,
+          snaNodeOperHostSscpId
+                  OCTET STRING,
+          snaNodeOperStartTime
+                  TimeStamp,
+          snaNodeOperLastStateChange
+                  TimeStamp,
+          snaNodeOperActFailures
+                  Counter32,
+          snaNodeOperActFailureReason
+                  INTEGER
+          }
+
+snaNodeOperName OBJECT-TYPE
+          SYNTAX  DisplayString (SIZE(0..17))
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                "The value identifies the current name of the Node.
+                In Type 2.1 networks, this
+                is a fully-qualified name, meaning that the Node name
+                is preceded by the NetId (if present) with a period
+                as the delimiter."
+          ::= { snaNodeOperEntry 1 }
+
+snaNodeOperType OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  other(1),
+                  pu10(2),
+                  pu20(3),
+                  t21LEN(4),
+                  endNode(5),
+                  networkNode(6)
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value identifies the current type of the Node."
+          ::= { snaNodeOperEntry 2 }
+
+snaNodeOperXidFormat OBJECT-TYPE
+          SYNTAX  INTEGER  {
+                  format0 (1),
+                  format1 (2),
+                  format3 (3)
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value identifies the type of XID format currently
+                   used for this Node.
+                   Note that there is no format type 2."
+          ::= { snaNodeOperEntry 3 }
+
+snaNodeOperBlockNum OBJECT-TYPE
+          SYNTAX DisplayString (SIZE(3))
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value identifies the block number for this Node
+                  instance. It is the first 3 hexadecimal digits
+
+                  of the SNA Node id."
+          ::= { snaNodeOperEntry 4 }
+
+snaNodeOperIdNum OBJECT-TYPE
+          SYNTAX  DisplayString (SIZE(5))
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value identifies the ID number for this Node
+                  instance.  This is the last 5 hexadecimal digits of
+                  the SNA Node id."
+          ::= { snaNodeOperEntry 5 }
+
+snaNodeOperEnablingMethod OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  other (1),
+                  startup (2),
+                  demand (3),
+                  onlyMS (4)
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value indicates how the Node is activated for
+                  the first time.
+                  The values have the following meanings:
+                     other (1)   - not at boot time, LU activation
+                        or by a Management Station;
+                     startup (2) - at SNA services' initialization
+                        time (this is the default),
+                     demand (3)  - only when LU is requested by
+                        application,
+                     onlyMS (4) - by a network Management Station
+                        only."
+          ::= { snaNodeOperEntry 6 }
+
+snaNodeOperLuTermDefault OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  unbind (1),
+                  termself (2),
+                  rshutd (3),
+                  poweroff (4)
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                "The value identifies the default method used to
+                deactivate LUs for this Node.
+
+                For LU6.2s, 'unbind(1)' is the only valid value.
+
+                unbind(1) -   terminate the LU-LU session by sending
+                        an SNA UNBIND request.
+                termself(2) - terminate the LU-LU session by sending
+                        an SNA TERM-SELF (Terminate Self) request on
+                        the SSCP-LU session. The SSCP will inform the
+                        remote session LU partner to send an UNBIND
+                        request to terminate the session.
+                rshutd(3) -   terminate the LU-LU session by sending
+                        an SNA RSHUTD (Request ShutDown) request to
+                        the remote session LU partner. The remote LU
+                        will then send an UNBIND request to terminate
+                        the session.
+                poweroff(4) - terminate the LU-LU session by sending
+                        either an SNA LUSTAT (LU Status) request on
+                        the LU-LU session or an SNA NOTIFY request on
+                        the SSCP-LU session indicating that the LU has
+                        been powered off. Sending both is also
+                        acceptable. The result should be that the
+                        remote session LU partner will send an UNBIND
+                        to terminate the session.
+
+                This object describes the default behavior for this
+                Node; however, it is possible that for a specific LU
+                the behavior indicated by the snaLuOperTerm object is
+                different."
+          ::= { snaNodeOperEntry 7 }
+
+snaNodeOperMaxLu OBJECT-TYPE
+          SYNTAX  Integer32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "This value identifies the current, maximum number
+                  of LUs that are activated for this Node. For PU2.1,
+                  this object refers to the number of dependent LUs."
+          ::= { snaNodeOperEntry 8 }
+
+snaNodeOperHostDescription OBJECT-TYPE
+          SYNTAX  DisplayString (SIZE(0..128))
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "This value identifies the remote host currently
+                   associated with this Node.
+                   Since SSCP Id's may not be unique
+                   across hosts, the host description
+
+                   is required to uniquely identify the SSCP."
+          ::= { snaNodeOperEntry 9 }
+
+snaNodeOperStopMethod OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  other (1),
+                  normal (2),
+                  immed (3),
+                  force (4)
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "This value identifies the current Node shutdown
+                  method to be used by the Agent to stop the Node.
+                  When the Agent changes the Node's state to 'inactive
+                  (1)', the Agent must use the shutdown method
+                  indicated by this object.
+
+                  The values have the following meaning:
+
+                  other (1) - proprietary method not listed in this
+                              enumeration
+                  normal(2) - deactivate only when there is no more
+                        activity on this Node (i.e., all data flows
+                        have been completed and all sessions have
+                        been terminated).
+                  immed(3)  - deactivate immediately regardless of
+                        current activities on this Node. Wait for
+                        deactivation responses (from remote Node)
+                        before changing the Node state to inactive.
+                  force(4)  - deactivate immediately regardless of
+                        current activities on this Node. Do not wait
+                        for deactivation responses (from remote Node)
+                        before changing the Node state to inactive.
+
+                  Note that a write operation to
+                  snaNodeAdminOperStopMethod may immediately change
+                  the value of snaNodeOperStopMethod depending on
+                  the Agent implementation."
+          ::= { snaNodeOperEntry 10 }
+
+snaNodeOperState OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  inactive (1),
+                  active (2),
+                  waiting (3),
+                  stopping (4)
+
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The current state of the Node.
+                  The values have the following meanings:
+                    inactive (1), a row representing the Node has
+                        been created in the AdminTable
+                        and, the Node is ready for activation -or-
+                        an active Node has been stopped -or-
+                        a waiting Node has returned to the inactive
+                        state.
+                    waiting (3), a request to have the Node activated
+                        has been issued, and the Node is pending
+                        activation.
+                    active (2), the Node is ready and operating.
+                    stopping (4), the request to stop the Node has
+                        been issued while the StopMethod normal
+                        or immediate is used."
+          ::= { snaNodeOperEntry 11 }
+
+snaNodeOperHostSscpId OBJECT-TYPE
+          SYNTAX  OCTET STRING (SIZE(0..6))
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "This value identifies the current SSCP Id
+                   associated with the Node. This object is only
+                   applicable to PU 2.0s. If the Node
+                   is not a PU 2.0 type, then this object contains a
+                   zero length string."
+          ::= { snaNodeOperEntry 12 }
+
+snaNodeOperStartTime OBJECT-TYPE
+          SYNTAX  TimeStamp
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The timestamp (e.g, the Agent's sysUpTime value)
+                   at the Node activation."
+          ::= { snaNodeOperEntry 13 }
+
+snaNodeOperLastStateChange OBJECT-TYPE
+          SYNTAX  TimeStamp
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The timestamp (e.g., the Agent's sysUpTime value)
+
+                  at the last state change of the Node."
+          ::= { snaNodeOperEntry 14 }
+
+snaNodeOperActFailures OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "This value identifies the number of failed Node
+                  activation attempts."
+          ::= { snaNodeOperEntry 15 }
+
+snaNodeOperActFailureReason OBJECT-TYPE
+          SYNTAX  INTEGER {
+                  other (1),
+                  linkFailure (2),
+                  noResources (3),
+                  badConfiguration (4),
+                  internalError (5)
+                  }
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The value indicates the reason for the activation
+                  failure.  The value 'other (1)' indicates a reason
+                  not listed in the enumeration. This object
+                  will be sent in the trap snaNodeActFailTrap."
+          ::= { snaNodeOperEntry 16 }
+
+-- ***************************************************************
+-- The following object is updated when there is a change to
+-- the value of snaNodeOperState in any row or a row is
+-- added/deleted from the snaNodeOperTable via the snaNodeAdminTable.
+-- ***************************************************************
+
+snaNodeOperTableLastChange OBJECT-TYPE
+          SYNTAX  TimeStamp
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The timestamp (e.g., the Agent's sysUpTime value)
+                  at the last change made to any object in the
+                  snaNodeOperTable, including row deletions/additions
+                  made as a result of changes to the
+                  snaNodeAdminRowStatus object.
+
+                  This object can be used to reduce frequent
+
+                  retrievals of the snaNodeOperTable by a Management
+                  Station. It is expected that a Management Station
+                  will periodically poll this object and compare its
+                  current value with the previous one. A difference
+                  indicates that some Node operational information
+                  has been changed. Only then will the Management
+                  Station retrieve the entire table."
+          ::= { snaNode 4 }
+
+-- ***************************************************************
+-- The following table contains PU 2.0 statistics dynamic parameters.
+-- ***************************************************************
+
+snaPu20StatsTable OBJECT-TYPE
+          SYNTAX  SEQUENCE OF SnaPu20StatsEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "This table contains the dynamic parameters which
+                  have read-only access. The entries in this table
+                  correspond to PU 2.0 entries in the snaNodeOperTable
+                  and cannot be created by a Management Station."
+          ::= { snaNode 5 }
+
+snaPu20StatsEntry OBJECT-TYPE
+          SYNTAX  SnaPu20StatsEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "The entry contains parameters which describe the
+                  statistics for one PU 2.0. They have read-only
+                  access.
+                  The counters represent traffic for all kinds
+                  of sessions: LU-LU, SSCP-PU, SSCP-LU.
+
+                  Each Node of PU Type 2.0 from the snaNodeAdminTable
+                  has one entry in this table and the index used
+                  here has the same value as snaNodeAdminIndex of
+                  that PU.  The entry is created by the Agent."
+          INDEX   { snaNodeAdminIndex }
+          ::= { snaPu20StatsTable 1 }
+
+SnaPu20StatsEntry ::= SEQUENCE {
+          snaPu20StatsSentBytes
+                  Counter32,
+          snaPu20StatsReceivedBytes
+                  Counter32,
+          snaPu20StatsSentPius
+                  Counter32,
+          snaPu20StatsReceivedPius
+                  Counter32,
+          snaPu20StatsSentNegativeResps
+                  Counter32,
+          snaPu20StatsReceivedNegativeResps
+                  Counter32,
+          snaPu20StatsActLus
+                  Gauge32,
+          snaPu20StatsInActLus
+                  Gauge32,
+          snaPu20StatsBindLus
+                  Gauge32
+          }
+
+snaPu20StatsSentBytes OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of bytes sent by this Node."
+          ::= { snaPu20StatsEntry 1 }
+
+snaPu20StatsReceivedBytes OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of bytes received by this Node."
+          ::= { snaPu20StatsEntry 2 }
+
+snaPu20StatsSentPius OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of PIUs sent by this Node."
+          ::= { snaPu20StatsEntry 3 }
+
+snaPu20StatsReceivedPius OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of PIUs received by this Node."
+          ::= { snaPu20StatsEntry 4 }
+
+snaPu20StatsSentNegativeResps OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of negative responses sent
+                  by this Node."
+          ::= { snaPu20StatsEntry 5 }
+
+snaPu20StatsReceivedNegativeResps OBJECT-TYPE
+          SYNTAX  Counter32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of negative responses received
+                  by this Node."
+          ::= { snaPu20StatsEntry 6 }
+
+snaPu20StatsActLus OBJECT-TYPE
+          SYNTAX  Gauge32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of LUs on this PU which have
+                  received and responded to ACTLU from the host."
+          ::= { snaPu20StatsEntry 7 }
+
+snaPu20StatsInActLus OBJECT-TYPE
+          SYNTAX  Gauge32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of LUs on this PU which have
+                  not received an ACTLU from the host.  This is
+                  possible if the number of configured LUs exceeds
+                  that on the host."
+          ::= { snaPu20StatsEntry 8 }
+
+snaPu20StatsBindLus OBJECT-TYPE
+          SYNTAX  Gauge32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The number of LUs on this PU which have
+                  received and acknowledged a BIND request from the
+                  host."
+          ::= { snaPu20StatsEntry 9 }
+
+-- ***************************************************************
+-- The following table contains the association between Nodes and
+-- link identifiers.
+-- It is used for configuration purposes.
+-- ***************************************************************
+
+snaNodeLinkAdminTable OBJECT-TYPE
+          SYNTAX  SEQUENCE OF SnaNodeLinkAdminEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "This table contains the references to link
+                  specific tables. If a Node is configured for
+                  multiple links, then the Node will have
+                  multiple entries in this table.
+                  The entries in this table can be generated
+                  initially, after initialization of SNA service,
+                  by the Agent which uses information from
+                  Node configuration file.
+                  Subsequent modifications of parameters,
+                  creation of new Nodes link entries and deletion
+                  of entries is possible.
+                  The modification to this table can be
+                  saved in the Node configuration file for the
+                  next initialization of SNA service, but the mechanism
+                  for this function is not defined here."
+          ::= { snaNode 6 }
+
+snaNodeLinkAdminEntry OBJECT-TYPE
+          SYNTAX  SnaNodeLinkAdminEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "Entry contains the configuration information that
+                  associates a Node instance to one link instance.
+                  The objects in the entry have read-create access.
+                  Entry can be created, modified or deleted.
+                  The object snaNodeLinkAdminRowStatus is used (set)
+                  to create or delete an entry.
+                  The object snaNodeLinkAdminSpecific can be set
+                  later, after the entry has been created."
+          INDEX   { snaNodeAdminIndex,
+                    snaNodeLinkAdminIndex }
+          ::= { snaNodeLinkAdminTable 1 }
+
+SnaNodeLinkAdminEntry ::= SEQUENCE {
+          snaNodeLinkAdminIndex
+                  Integer32,
+          snaNodeLinkAdminSpecific
+                  InstancePointer,
+          snaNodeLinkAdminMaxPiu
+                  Integer32,
+          snaNodeLinkAdminRowStatus
+                  RowStatus
+          }
+
+snaNodeLinkAdminIndex OBJECT-TYPE
+          SYNTAX  Integer32
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "This value is used to index the instances of objects.
+                  If an Agent creates the entry, then it will assign
+                  this number otherwise a Management Station
+                  generates a random number when it reserves the
+                  entry for creation."
+          ::= { snaNodeLinkAdminEntry 1 }
+
+snaNodeLinkAdminSpecific OBJECT-TYPE
+          SYNTAX  InstancePointer
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                  "This value points to the row in the table
+                  containing information on the link instance.
+                  (e.g., the sdlcLSAdminTable of
+                  the SNA DLC MIB module)."
+          ::= { snaNodeLinkAdminEntry 2 }
+
+snaNodeLinkAdminMaxPiu OBJECT-TYPE
+          SYNTAX  Integer32
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                  "This value identifies the maximum number of octets
+                  that can be exchanged by this Node in one
+                  Path Information Unit (PIU)."
+          ::= { snaNodeLinkAdminEntry 3 }
+
+snaNodeLinkAdminRowStatus OBJECT-TYPE
+          SYNTAX  RowStatus
+          MAX-ACCESS  read-create
+          STATUS  current
+          DESCRIPTION
+                "This object is used by a Management Station to
+                create or delete the row entry in the
+
+                snaNodeLinkAdminTable.
+                To activate a row, a Management Station sets the value
+                to 'active (1)' or 'notReady (3)'.  Upon successful
+                creation of the row, the Agent automatically creates
+                a corresponding entry in the snaNodeLinkOperTable.
+
+                Row deletion can be Management Station or Agent
+                initiated:
+                (a) The Management Station can set the value to
+                'destroy (6)' only when the value of
+                snaNodeLinkOperState of this Link
+                instance is 'inactive (1)'. The Agent will then
+                delete the row corresponding to this Link
+                instance from snaNodeLinkOperTable and
+                from snaNodeLinkAdminTable.
+                (b) The Agent detects that a row is in the
+                'notReady (3)' state for greater than a
+                default period of 5 minutes.
+                (c) The Agent will not include a row with RowStatus=
+                'notReady (3)', after SNA system re-initialization
+                 (e.g., reboot)."
+          ::= { snaNodeLinkAdminEntry 4 }
+
+-- ***************************************************************
+-- The following object is updated when there is a change to
+-- the value of any object in the snaNodeLinkAdminTable.
+-- ***************************************************************
+
+snaNodeLinkAdminTableLastChange OBJECT-TYPE
+          SYNTAX  TimeStamp
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The timestamp (e.g., the Agent's sysUpTime value)
+                  at the last
+                  change made to any object in the snaNodeLinkAdminTable,
+                  including row deletions/additions (i.e., changes
+                  to the snaNodeLinkAdminRowStatus object).
+
+                  This object can be used to reduce frequent
+                  retrievals of the snaNodeLinkAdminTable by a
+                  Management Station. It is expected that a
+                  Management Station will periodically poll this
+                  object and compare its current value with the
+                  previous one.
+                  A difference indicates that some Node operational
+                  information has been changed. Only then will the
+
+                  Management Station retrieve the entire table."
+          ::= { snaNode 7 }
+
+-- ***************************************************************
+-- The following table contains the association between
+-- Nodes and link identifiers.
+-- It provides the current status.
+-- ***************************************************************
+
+snaNodeLinkOperTable OBJECT-TYPE
+          SYNTAX  SEQUENCE OF SnaNodeLinkOperEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "This table contains all references to link
+                  specific tables for operational parameters.
+                  If a Node is configured for multiple links,
+                  then the Node will have multiple entries in
+                  this table. This table augments the
+                  snaNodeLinkAdminTable."
+          ::= { snaNode 8 }
+
+snaNodeLinkOperEntry OBJECT-TYPE
+          SYNTAX  SnaNodeLinkOperEntry
+          MAX-ACCESS  not-accessible
+          STATUS  current
+          DESCRIPTION
+                  "Entry contains all current parameters for one
+                  Node link. The objects in the entry have
+                  read-only access."
+          AUGMENTS   { snaNodeLinkAdminEntry }
+          ::= { snaNodeLinkOperTable 1 }
+
+SnaNodeLinkOperEntry ::= SEQUENCE {
+          snaNodeLinkOperSpecific
+                  InstancePointer,
+          snaNodeLinkOperMaxPiu
+                  Integer32
+          }
+
+snaNodeLinkOperSpecific OBJECT-TYPE
+          SYNTAX  InstancePointer
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "This value points to the row in the table
+                  containing information on the link instance.
+
+                  (e.g., the sdlcLSOperTable of
+                  the SNA DLC MIB module)."
+          ::= { snaNodeLinkOperEntry 1 }
+
+snaNodeLinkOperMaxPiu OBJECT-TYPE
+          SYNTAX  Integer32
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "Maximum number of octets that can
+                  be exchanged by this Node in one Path
+                  Information Unit (PIU)."
+          ::= { snaNodeLinkOperEntry 2 }
+
+-- ***************************************************************
+-- The following object is updated when a row is added/deleted
+-- from the snaNodeLinkOperTable.
+-- ***************************************************************
+
+snaNodeLinkOperTableLastChange OBJECT-TYPE
+          SYNTAX  TimeStamp
+          MAX-ACCESS  read-only
+          STATUS  current
+          DESCRIPTION
+                  "The timestamp of the last
+                  change made to any object in the snaNodeLinkOperTable,
+                  including row deletions/additions.
+
+                  This object can be used to reduce frequent
+                  retrievals of the snaNodeLinkOperTable by a
+                  Management Station. It is expected that a
+                  Management Station will periodically poll this
+                  object and compare its current value with the
+                  previous one.
+                  A difference indicates that some Node operational
+                  information has been changed. Only then will the
+                  Management Station retrieve the entire table."
+          ::= { snaNode 9 }
+
+-- ***************************************************************
+-- Traps
+-- ***************************************************************
+
+snaNodeTraps OBJECT IDENTIFIER ::= { snaNode 10 }
+
+snaNodeStateChangeTrap NOTIFICATION-TYPE
+          OBJECTS  { snaNodeOperName,
+                  snaNodeOperState }
+          STATUS  current
+          DESCRIPTION
+                  "This trap indicates that the operational state
+                  (i.e., value of the snaNodeOperState object) of a Node
+                   has changed. The following variables are returned:
+                    snaNodeOperName - current name of the Node,
+                      with the instance identifying the Node; and,
+                    snaNodeOperState - current state after
+                      the change."
+          ::= { snaNodeTraps 1 }
+
+snaNodeActFailTrap NOTIFICATION-TYPE
+          OBJECTS  { snaNodeOperName,
+                  snaNodeOperState,
+                  snaNodeOperActFailureReason }
+          STATUS  current
+          DESCRIPTION
+                  "This trap indicates a Node activation failure.
+                  The value of snaNodeOperState indicates the current
+                  state after the activation attempt.
+                  The value of snaNodeOperActFailureReason indicates
+                  the failure reason."
+          ::=  { snaNodeTraps 2 }
+
+-- ***************************************************************
+-- snaLu group
+--
+-- It contains Managed Objects related to LUs in general and some
+-- specific for LUs of type 0, 1, 2, 3.
+-- ***************************************************************
+
+-- ***************************************************************
+-- The following table contains LU configuration parameters.
+-- ***************************************************************
+
+snaLuAdminTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SnaLuAdminEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This table contains LU configuration information.
+                The rows in this table can be created and deleted
+                by a Management Station.
+                Only objects which are common to all types of LUs
+                are included in this table."
+        ::= { snaLu 1 }
+
+snaLuAdminEntry OBJECT-TYPE
+        SYNTAX  SnaLuAdminEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "Contains configuration variables for an LU."
+        INDEX   { snaNodeAdminIndex, snaLuAdminLuIndex }
+        ::= { snaLuAdminTable 1 }
+
+SnaLuAdminEntry ::= SEQUENCE {
+        snaLuAdminLuIndex
+                Integer32,
+        snaLuAdminName
+                DisplayString,
+        snaLuAdminSnaName
+                DisplayString,
+        snaLuAdminType
+                INTEGER,
+        snaLuAdminDepType
+                INTEGER,
+        snaLuAdminLocalAddress
+                OCTET STRING,
+        snaLuAdminDisplayModel
+                INTEGER,
+        snaLuAdminTerm
+                INTEGER,
+        snaLuAdminRowStatus
+                RowStatus
+        }
+
+snaLuAdminLuIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the unique index for an
+
+                 LU instance within a Node."
+        ::= { snaLuAdminEntry 1 }
+
+snaLuAdminName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..48))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the user configurable
+                name for this LU. If a name is not assigned to the LU,
+                then this object contains a zero length string.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaLuOperName until the Node has
+                been re-activated (e.g., after the next
+                initialization of the SNA services)."
+        ::= { snaLuAdminEntry 2 }
+
+snaLuAdminSnaName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(1..17))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the SNA LU name
+                used in exchange of SNA data.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaLuOperSnaName until the Node has
+                been re-activated (e.g., after the next
+                initialization of the SNA services)."
+        ::= { snaLuAdminEntry 3 }
+
+snaLuAdminType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                other(1),
+                lu0(2),
+                lu1(3),
+                lu2(4),
+                lu3(5),
+                lu4(6),
+                lu62(7),
+                lu7(8)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the LU type.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaLuOperAdminType until the Node has
+                been re-activated (e.g., after the next
+                initialization of the SNA services)."
+        ::= { snaLuAdminEntry 4 }
+
+snaLuAdminDepType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                dependent(1),
+                independent(2)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "This value identifies whether the LU is
+                dependent or independent.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaLuOperDepType until the Node has
+                been re-activated (e.g., after the next
+                initialization of the SNA services)."
+        ::= { snaLuAdminEntry 5 }
+
+snaLuAdminLocalAddress OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(1))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The local address for this LU is a byte with a value
+                ranging from 0 to 254.For dependent LUs, this value
+                ranges from 1 to 254 and for independent LUs this
+                value is always 0.
+
+                A write operation to this object will not change the
+                operational value reflected in snaLuOperLocalAddress
+                until the Node has been re-activated (e.g., after the
+                next initialization of the SNA services)."
+        ::= { snaLuAdminEntry 6 }
+
+snaLuAdminDisplayModel OBJECT-TYPE
+        SYNTAX  INTEGER {
+                invalid(1),
+                model2A(2),
+                model2B(3),
+                model3A(4),
+                model3B(5),
+                model4A(6),
+                model4B(7),
+                model5A(8),
+                model5B(9),
+                dynamic(10)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "The value of this object identifies the  model type
+                and screen size of the terminal connected to the host.
+                This is only valid for LU Type 2.  The values have
+                the following meaning:
+
+                model2A(2) - Model 2 (24 rows x 80 cols) with base
+                        attributes
+                model2B(3) - Model 2 (24 rows x 80 cols) with
+                        extended attributes
+                model3A(4) - Model 3 (32 rows x 80 cols) with base
+                        attributes
+                model3B(5) - Model 3 (32 rows x 80 cols) with extended
+                        attributes
+                model4A(6) - Model 4 (43 rows x 80 cols) with base
+                        attributes
+                model4B(7) - Model 4 (43 rows x 80 cols) with extended
+                                                attributes
+                model5A(8) - Model 5 (27 rows x 132 cols) with base
+                        attributes
+                model5B(9) - Model 5 (27 rows x 132 cols) with
+                        extended attributes
+                dynamic(10) - Screen size determine with BIND and Read
+                                                Partition Query.
+
+                In case this LU is not Type 2, then this object
+                should contain the invalid(1) value."
+        ::= { snaLuAdminEntry 7 }
+
+snaLuAdminTerm OBJECT-TYPE
+        SYNTAX  INTEGER {
+                unbind (1),
+                termself (2),
+                rshutd (3),
+                poweroff (4)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the desired method for
+                deactivation of this LU. This value overrides the
+                default method (snaNodeOperLuTermDefault) for this
+                Node.  For LU 6.2, only the value 'unbind (1)'
+                applies.
+
+                unbind(1) -   terminate the LU-LU session by sending
+                        an SNA UNBIND request.
+                termself(2) - terminate the LU-LU session by sending
+                        an SNA TERM-SELF (Terminate Self) request on
+                        the SSCP-LU session. The SSCP will inform the
+                        remote session LU partner to send an UNBIND
+                        request to terminate the session.
+                rshutd(3) -   terminate the LU-LU session by sending
+                        an SNA RSHUTD (Request ShutDown) request to
+                        the remote session LU partner. The remote LU
+                        will then send an UNBIND request to terminate
+                        the session.
+                poweroff(4) - terminate the LU-LU session by sending
+                        either an SNA LUSTAT (LU Status) request on
+                        the LU-LU session or an SNA NOTIFY request on
+                        the SSCP-LU session indicating that the LU has
+                        been powered off. Sending both is also
+                        acceptable. The result should be that the
+                        remote session LU partner will send an UNBIND
+                        to terminate the session.
+
+                A write operation to this object may immediately
+                change the operational value reflected
+                in snaLuOperTerm depending
+                on the Agent implementation."
+        ::= { snaLuAdminEntry 8 }
+
+snaLuAdminRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+                "This object is used by a Management Station to
+                create or delete the row entry in the
+                snaLuAdminTable.
+                To activate a row, the Management Station sets the
+                value to 'active (1)' or 'notReady (3)'.
+                Upon successful creation of the row, the Agent
+                automatically creates a corresponding entry in the
+                snaLuOperTable with snaLuOperState equal to
+                'inactive (1)'.
+
+                Row deletion can be Management Station or Agent
+                initiated:
+                (a) The Management Station can set the value to
+                'destroy (6)' only when the value of snaLuOperState
+                of this LU instance is 'inactive (1)'. The Agent will
+                then delete the row corresponding to this LU
+                instance from snaLuAdminTable and
+                from snaLuOperTable.
+                (b) The Agent detects that a row is in the
+                'notReady (3)' state for greater than a
+                default period of 5 minutes.
+                (c) The Agent will not create a row with RowStatus
+                equal to 'notReady (3)', after SNA system
+                re-initialization (e.g., reboot)."
+        ::= { snaLuAdminEntry 9 }
+
+-- ***************************************************************
+-- The following table contains LU state dynamic parameters.
+-- ***************************************************************
+
+snaLuOperTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SnaLuOperEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This table contains dynamic runtime information and
+                control variables relating to LUs.
+                Only objects which are common to all types of LUs are
+                included in this table. This table augments the
+                snaLuAdminTable."
+        ::= { snaLu 2 }
+
+snaLuOperEntry OBJECT-TYPE
+        SYNTAX  SnaLuOperEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "Contains objects reflecting current information
+                for an LU.
+                Each entry is created by the Agent.  All entries
+                have read-only access."
+        AUGMENTS        { snaLuAdminEntry }
+        ::= { snaLuOperTable 1 }
+
+SnaLuOperEntry ::= SEQUENCE {
+        snaLuOperName
+                DisplayString,
+        snaLuOperSnaName
+                DisplayString,
+        snaLuOperType
+                INTEGER,
+        snaLuOperDepType
+                INTEGER,
+        snaLuOperLocalAddress
+                OCTET STRING,
+        snaLuOperDisplayModel
+                INTEGER,
+        snaLuOperTerm
+                INTEGER,
+        snaLuOperState
+                INTEGER,
+        snaLuOperSessnCount
+                Gauge32
+        }
+
+snaLuOperName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..48))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "User configurable name for this LU. If a name
+                is not assigned, then this object contains a
+                zero length string."
+        ::= { snaLuOperEntry 1 }
+
+snaLuOperSnaName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(1..17))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the current SNA LU name."
+        ::= { snaLuOperEntry 2 }
+
+snaLuOperType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                other(1),
+                lu0(2),
+                lu1(3),
+                lu2(4),
+                lu3(5),
+                lu4(6),
+                lu62(7),
+                lu7(8)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the current LU type."
+        ::= { snaLuOperEntry 3 }
+
+snaLuOperDepType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                dependent(1),
+                independent(2)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies whether the LU is currently
+                 dependent or independent.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaLuOperDepType until the Node has
+                been re-activated (e.g., after the next
+                initialization of the SNA services)."
+        ::= { snaLuOperEntry 4 }
+
+snaLuOperLocalAddress OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(1))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The local address for this LU is a byte with a value
+                ranging from 0 to 254. For dependent LUs, this value
+                ranges from 1 to 254; for independent LUs this value
+                is always 0.
+
+                A write operation to this object will
+                not change the operational value reflected
+                in snaLuOperLocalAddress until the Node has
+                been re-activated (e.g., after the next
+                initialization of the SNA services)."
+        ::= { snaLuOperEntry 5 }
+
+snaLuOperDisplayModel OBJECT-TYPE
+        SYNTAX  INTEGER {
+                invalid(1),
+                model2A(2),
+                model2B(3),
+                model3A(4),
+                model3B(5),
+                model4A(6),
+                model4B(7),
+                model5A(8),
+                model5B(9),
+                dynamic(10)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The screen model type of the terminal connected to
+                the host. If this LU is not Type 2, then this
+                object should contain the 'invalid(1)' value."
+        ::= { snaLuOperEntry 6 }
+
+snaLuOperTerm OBJECT-TYPE
+        SYNTAX  INTEGER {
+                unbind (1),
+                termself (2),
+                rshutd (3),
+                poweroff (4)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the current method for
+                deactivation of this LU. This value overrides the
+                default method (snaNodeOperLuTermDefault) for this
+                Node.  For LU 6.2, only the value 'unbind (1)'
+                applies.
+
+                unbind(1) -   terminate the LU-LU session by sending
+                        an SNA UNBIND request.
+                termself(2) - terminate the LU-LU session by sending
+                        an SNA TERM-SELF (Terminate Self) request on
+                        the SSCP-LU session. The SSCP will inform the
+                        remote session LU partner to send an UNBIND
+                        request to terminate the session.
+                rshutd(3) -   terminate the LU-LU session by sending
+                        an SNA RSHUTD (Request ShutDown) request to
+                        the remote session LU partner. The remote LU
+                        will then send an UNBIND request to terminate
+                        the session.
+                poweroff(4) - terminate the LU-LU session by sending
+                        either an SNA LUSTAT (LU Status) request on
+                        the LU-LU session or an SNA NOTIFY request on
+                        the SSCP-LU session indicating that the LU has
+                        been powered off. Sending both is also
+                        acceptable. The result should be that the
+                        remote session LU partner will send an UNBIND
+
+                        to terminate the session."
+        ::= { snaLuOperEntry 7 }
+
+snaLuOperState OBJECT-TYPE
+        SYNTAX  INTEGER {
+                inactive (1),
+                active (2)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the current operational state of
+                this LU.
+                It has different meanings for dependent and independent
+                LUs.
+                For dependent LUs the values indicate the following:
+                  inactive (1) - LU didn't receive ACTLU, or
+                        it received DACTLU, or received ACTLU and sent
+                        negative response.
+                  active (2) - LU received ACTLU and acknowledged
+                        positively.
+
+                For independent LUs the values indicate the following:
+                  active (2) - the LU is defined and is able to send
+                        and receive BIND.
+                  inactive (1) - the LU has a session count equal
+                        to 0."
+        ::= { snaLuOperEntry 8 }
+
+snaLuOperSessnCount OBJECT-TYPE
+        SYNTAX  Gauge32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of currently active LU-LU sessions of
+                this LU.
+                For the independent LU, if this object has value 0,
+                it indicates that LU is inactive."
+        ::= { snaLuOperEntry 9 }
+
+-- ***************************************************************
+-- The following table contains LU session status parameters.
+-- ***************************************************************
+
+snaLuSessnTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SnaLuSessnEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This is a table containing objects which describe the
+                operational state of LU sessions.  Only objects which
+                are common to all types of LU sessions are included
+                in this table.
+
+                When a session's snaLuSessnOperState value changes to
+                'pendingBind (2)', then the corresponding entry
+                in the session table is created by the Agent.
+
+                When the session's snaLuSessnOperState value changes to
+                 'unbound (1)',  then the session will be removed from
+                the session table by the Agent."
+        ::= { snaLu 3 }
+
+snaLuSessnEntry OBJECT-TYPE
+        SYNTAX  SnaLuSessnEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "An entry contains dynamic parameters for an LU-LU
+                session.
+                The indices identify the Node, local LU, and remote LU
+                for this session."
+        INDEX   { snaNodeAdminIndex,
+                   snaLuAdminLuIndex,
+                   snaLuSessnRluIndex,
+                   snaLuSessnIndex }
+        ::= { snaLuSessnTable 1 }
+
+SnaLuSessnEntry ::= SEQUENCE {
+        snaLuSessnRluIndex
+                Integer32,
+        snaLuSessnIndex
+                Integer32,
+        snaLuSessnLocalApplName
+                DisplayString,
+        snaLuSessnRemoteLuName
+                DisplayString,
+        snaLuSessnMaxSndRuSize
+                INTEGER,
+        snaLuSessnMaxRcvRuSize
+                INTEGER,
+        snaLuSessnSndPacingSize
+                INTEGER,
+        snaLuSessnRcvPacingSize
+                INTEGER,
+        snaLuSessnActiveTime
+                TimeStamp,
+        snaLuSessnAdminState
+                INTEGER,
+        snaLuSessnOperState
+                INTEGER,
+        snaLuSessnSenseData
+                OCTET STRING,
+        snaLuSessnTerminationRu
+                INTEGER,
+        snaLuSessnUnbindType
+                OCTET STRING,
+        snaLuSessnLinkIndex
+                Integer32
+        }
+
+snaLuSessnRluIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value may be used to identify information about
+                the session partner LU in a table of information about
+                remote LUs.  Such a table is not defined in this
+                document.  If a table of remote LU information is not
+                implemented, or if the table is implemented but it does
+                not contain information about the partner LU for a
+                particular session (as for dependent LU-LU sessions)
+                then this object will have a value of zero."
+        ::= { snaLuSessnEntry 1 }
+
+snaLuSessnIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the unique index of the session.
+                It is recommended that an Agent should not reuse the
+                index of a deactivated session for a significant
+                period of time (e.g., one week)."
+        ::= { snaLuSessnEntry 2 }
+
+snaLuSessnLocalApplName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..48))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The name of the local application using this LU.
+
+                If the local application is unknown, then this object
+                contains a zero length string."
+        ::= { snaLuSessnEntry 3 }
+
+snaLuSessnRemoteLuName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE(0..17))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "For dependent LUs which are indicated by the
+                snaLuOperDepType object containing the value
+                'dependent (1)', this object contains the Primary
+                LU (PLU) name.  For independent LUs,
+                this object contains the fully-qualified remote LU
+                name of this 6.2 session.
+                A fully qualified name is an SNA NAU entity name
+                preceded by the NetId and a period as the delimiter."
+        ::= { snaLuSessnEntry 4 }
+
+snaLuSessnMaxSndRuSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..8192)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The maximum RU size used on this session for sending
+                RUs."
+        ::= { snaLuSessnEntry 5 }
+
+snaLuSessnMaxRcvRuSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..8192)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The maximum RU size used on this session for
+                receiving RUs."
+        ::= { snaLuSessnEntry 6 }
+
+snaLuSessnSndPacingSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..63)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The size of the send pacing window on this session."
+        ::= { snaLuSessnEntry 7 }
+
+snaLuSessnRcvPacingSize OBJECT-TYPE
+        SYNTAX  INTEGER (1..63)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The size of the receive pacing window on this
+                session."
+        ::= { snaLuSessnEntry 8 }
+
+snaLuSessnActiveTime OBJECT-TYPE
+        SYNTAX  TimeStamp
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The timestamp (e.g., the Agent's sysUpTime value)
+                when this session becomes active."
+        ::= { snaLuSessnEntry 9 }
+
+snaLuSessnAdminState OBJECT-TYPE
+        SYNTAX  INTEGER {
+                unbound (1),
+                bound (3)
+                }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the desired operational state of
+                the session. This object is used to
+                change the operational state of the session.
+                A Management Station can only change the operational
+                state of the session to 'unbound (1)'.
+
+                Session deactivation:
+                  If a session is in the operational state
+                  'bound (3)' then setting the value of this
+                  object to 'unbound (1)' will initiate the
+                  session shutdown.
+
+                  If a session is in the operational state
+                  'pendingBind (2)' then setting the value of this
+                  object to 'unbound (1)' will initiate the session
+                  shutdown.
+                  If a session is in the operational state
+                  'pendingUnbind (4)' for an abnormally long period
+                  of time (e.g., three minutes) then setting the value
+                  of this object to 'unbound (1)' will change the
+                  session operational state to 'unbound (1)'.
+
+                Note: for dependent LUs, deactivating the session is
+                the same as deactivating the LU."
+        ::= { snaLuSessnEntry 10 }
+
+snaLuSessnOperState OBJECT-TYPE
+        SYNTAX  INTEGER {
+                unbound (1),
+                pendingBind (2),
+                bound (3),
+                pendingUnbind (4)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the current operational state of
+                the session.
+
+                  'unbound (1)' - session has been  unbound;
+                        in this state it will be removed from the
+                        session table by the Agent.
+
+                  'pendingBind (2)' - this state has different
+                        meanings for dependent and independent LUs;
+                        for dependent LU - waiting for BIND from
+                        the host, for independent LU - waiting for
+                        BIND response.  When a session enters this
+                        state, the corresponding entry in the
+                        session table is created by the Agent.
+
+                  'bound (3)' - session has been successfully bound.
+
+                  'pendingUnbind (4)' - session enters this state
+                        when an UNBIND is sent and before the
+                        rsp(UNBIND) is received."
+        ::= { snaLuSessnEntry 11 }
+
+snaLuSessnSenseData OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..8))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the sense code when there is
+                a BIND failure. It is taken from the negative BIND
+                response or UNBIND request.
+                This is displayed as 8 hexadecimal digits."
+        ::= { snaLuSessnEntry 12 }
+
+snaLuSessnTerminationRu OBJECT-TYPE
+        SYNTAX INTEGER {
+                other (1),
+                bindFailure (2),
+                unbind (3)
+
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the SNA RU that terminated the
+                session.
+                If the session is not in the unbound state, this object
+                has a value of  'other (1)'."
+        ::= { snaLuSessnEntry 13 }
+
+snaLuSessnUnbindType OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE(0..1))
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "If the session is in the unbound state, and it was
+                terminated by an UNBIND, then this object contains
+                the UNBIND type value (byte 1 of the UNBIND RU);
+                otherwise the string is null."
+        ::= { snaLuSessnEntry 14 }
+
+snaLuSessnLinkIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value identifies the link over which the session
+                passes.  It is an index into snaNodeLinkAdminTable.
+                If the index value is not known, the value of this
+                object shall be zero."
+        ::= { snaLuSessnEntry 15 }
+
+-- ***************************************************************
+-- The following table contains LU sessions statistics dynamic
+-- parameters.
+-- ***************************************************************
+
+snaLuSessnStatsTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SnaLuSessnStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This table contains dynamic statistics information
+                relating to LU sessions.
+                The entries in this table augment the entries in
+                the snaLuSessnTable and cannot be created by
+
+                a Management Station."
+        ::= { snaLu 4 }
+
+snaLuSessnStatsEntry OBJECT-TYPE
+        SYNTAX  SnaLuSessnStatsEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "Contains statistics information for an LU session.
+                Each entry is created by the Agent.
+                Objects in this table have read-only access.
+                Each session from snaLuSessnTable
+                has one entry in this table."
+        AUGMENTS   { snaLuSessnEntry }
+        ::= { snaLuSessnStatsTable 1 }
+
+SnaLuSessnStatsEntry ::= SEQUENCE {
+        snaLuSessnStatsSentBytes
+                Counter32,
+        snaLuSessnStatsReceivedBytes
+                Counter32,
+        snaLuSessnStatsSentRus
+                Counter32,
+        snaLuSessnStatsReceivedRus
+                Counter32,
+        snaLuSessnStatsSentNegativeResps
+                Counter32,
+        snaLuSessnStatsReceivedNegativeResps
+                Counter32
+        }
+
+snaLuSessnStatsSentBytes OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of bytes sent by the local LU."
+        ::= { snaLuSessnStatsEntry 1 }
+
+snaLuSessnStatsReceivedBytes OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of bytes received by the local LU."
+        ::= { snaLuSessnStatsEntry 2 }
+
+snaLuSessnStatsSentRus OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of RUs sent by the local LU."
+        ::= { snaLuSessnStatsEntry 3 }
+
+snaLuSessnStatsReceivedRus OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of RUs received by the local LU."
+        ::= { snaLuSessnStatsEntry 4 }
+
+snaLuSessnStatsSentNegativeResps OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of negative responses sent by the
+                local LU."
+        ::= { snaLuSessnStatsEntry 5 }
+
+snaLuSessnStatsReceivedNegativeResps OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The number of negative responses received by the
+                local LU."
+        ::= { snaLuSessnStatsEntry 6 }
+
+-- ***************************************************************
+-- Traps
+-- ***************************************************************
+
+snaLuTraps OBJECT IDENTIFIER ::= { snaLu 5 }
+
+snaLuStateChangeTrap NOTIFICATION-TYPE
+        OBJECTS  {  snaLuOperName,
+                 snaLuOperSnaName,
+                snaLuOperState }
+        STATUS  current
+        DESCRIPTION
+                "This trap indicates that the operational state
+                (i.e., snaLuOperState value) of the LU has changed.
+
+                The value of snaLuOperName indicates the name of the
+                LU.
+                The value of snaLuOperSnaName indicates the SNA name
+                of LU.
+                The value of snaLuOperState indicates the current
+                state after change."
+        ::= { snaLuTraps 1 }
+
+snaLuSessnBindFailTrap NOTIFICATION-TYPE
+        OBJECTS  { snaLuSessnLocalApplName,
+                snaLuSessnRemoteLuName,
+                snaLuSessnOperState,
+                snaLuSessnSenseData }
+        STATUS  current
+        DESCRIPTION
+                "This trap indicates the failure of a BIND.
+                The value of snaLuSessnLocalApplName indicates the local
+                application name.
+                The value of snaLuSessnPartnerName indicates the partner
+                name.
+                The value of snaLuSessnOperState indicates the current
+                state after change.
+                The value of snaLuSessnBindFailureReason
+                indicates the failure reason.
+                The Agent should not generate more than 1 trap of this
+                type per minute to minimize the level of management
+                traffic on the network."
+        ::= { snaLuTraps 2 }
+
+-- ***************************************************************
+-- snaMgtTools group
+--
+-- Currently this group contains only one table.
+-- ***************************************************************
+
+-- ***************************************************************
+-- The following table contains Response Time Monitoring (RTM)
+-- configuration information and statistics for LU Type 2s.
+-- RTM supports the capability to measure and report end-user
+-- response times for dependent LUs. When the RTM state of an LU
+-- is 'on', response times for each LU transaction are monitored.
+-- A set of ranges is defined (e.g., Range 1 includes the number of
+-- transactions with response times less than 1 second) using the
+-- "boundary" definitions (e.g., boundary #2 is defined as 3 seconds).
+-- A set of counters (one per range) identifies
+-- the number of transactions within each response time range.
+-- ***************************************************************
+
+snaLuRtmTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF SnaLuRtmEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "This table contains Response Time Monitoring (RTM)
+                information relating to an LU (Type 2). Each entry
+                corresponds to an LU 2 entry in
+                snaLuAdminTable."
+        ::= { snaMgtTools 1 }
+
+snaLuRtmEntry OBJECT-TYPE
+        SYNTAX  SnaLuRtmEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "Contains RTM information for an LU (Type 2).
+                Each entry is created by the Agent."
+        INDEX   { snaLuRtmPuIndex, snaLuRtmLuIndex }
+        ::= { snaLuRtmTable 1 }
+
+SnaLuRtmEntry ::= SEQUENCE {
+        snaLuRtmPuIndex
+                Integer32,
+        snaLuRtmLuIndex
+                Integer32,
+        snaLuRtmState
+                INTEGER,
+        snaLuRtmStateTime
+                TimeStamp,
+        snaLuRtmDef
+                INTEGER,
+        snaLuRtmBoundary1
+                Integer32,
+        snaLuRtmBoundary2
+                Integer32,
+        snaLuRtmBoundary3
+                Integer32,
+        snaLuRtmBoundary4
+                Integer32,
+        snaLuRtmCounter1
+                Counter32,
+        snaLuRtmCounter2
+                Counter32,
+        snaLuRtmCounter3
+                Counter32,
+        snaLuRtmCounter4
+                Counter32,
+        snaLuRtmOverFlows
+                Counter32,
+        snaLuRtmObjPercent
+                Integer32,
+        snaLuRtmObjRange
+                INTEGER,
+        snaLuRtmNumTrans
+                Integer32,
+        snaLuRtmLastRspTime
+                Integer32,
+        snaLuRtmAvgRspTime
+                Integer32
+        }
+
+snaLuRtmPuIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS not-accessible
+        STATUS  current
+        DESCRIPTION
+                "The value identifies the PU 2.0 with which this LU is
+                associated."
+        ::= { snaLuRtmEntry 1 }
+
+snaLuRtmLuIndex OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+                "The value uniquely identifies an LU in a PU 2.0."
+        ::= { snaLuRtmEntry 2 }
+
+snaLuRtmState OBJECT-TYPE
+        SYNTAX  INTEGER {
+                off(1),
+                on(2)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the current RTM state of an LU."
+        ::= { snaLuRtmEntry 3 }
+
+snaLuRtmStateTime  OBJECT-TYPE
+        SYNTAX  TimeStamp
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The timestamp (e.g., the Agent's sysUpTime value)
+
+                when this session's RTM state (e.g., snaLuRtmState)
+                changes value."
+        ::= { snaLuRtmEntry 4 }
+
+snaLuRtmDef OBJECT-TYPE
+        SYNTAX  INTEGER {
+                firstChar(1),
+                kb(2),
+                cdeb(3)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "The value indicates the mode of measurement for this
+                RTM request.  The values have following meaning:
+                  firstChar(1) - time to first character on screen
+                  kb(2) - time to keyboard usable by operator
+                  cdeb(3) - time to Change Direction/End Bracket."
+        ::= { snaLuRtmEntry 5 }
+
+snaLuRtmBoundary1 OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This object contains the value of the first boundary
+                in units of 1/10th of a second."
+        ::= { snaLuRtmEntry 6 }
+
+snaLuRtmBoundary2 OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This object contains the value of the second boundary
+                 in units of 1/10th of a second."
+        ::= { snaLuRtmEntry 7 }
+
+snaLuRtmBoundary3 OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This object contains the value of the third boundary
+                 in units of 1/10th of a second."
+        ::= { snaLuRtmEntry 8 }
+
+snaLuRtmBoundary4 OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This object contains the value of the fourth boundary
+                in units of 1/10th of a second."
+        ::= { snaLuRtmEntry 9 }
+
+snaLuRtmCounter1 OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the number of transactions which
+                fall in the range specified by the first boundary."
+        ::= { snaLuRtmEntry 10 }
+
+snaLuRtmCounter2 OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the number of transactions which
+                fall in the range specified by the second boundary."
+        ::= { snaLuRtmEntry 11 }
+
+snaLuRtmCounter3 OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the number of transactions which
+                fall in the range specified by the third boundary."
+        ::= { snaLuRtmEntry 12 }
+
+snaLuRtmCounter4 OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the number of transactions which
+                fall in the range specified by the fourth boundary."
+        ::= { snaLuRtmEntry 13 }
+
+snaLuRtmOverFlows OBJECT-TYPE
+        SYNTAX  Counter32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the number of transactions which
+                exceed the highest range specified by the
+                boundaries."
+        ::= { snaLuRtmEntry 14 }
+
+snaLuRtmObjPercent OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the desired percentage of
+                transactions which should be under a designated
+                boundary range indicated by snaLuRtmObjRange."
+        ::= { snaLuRtmEntry 15 }
+
+snaLuRtmObjRange OBJECT-TYPE
+         SYNTAX  INTEGER {
+                other(1),
+                range1(2),
+                range2(3),
+                range3(4),
+                range4(5),
+                range5(6)
+                }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the designated boundary range to
+                which the snaLuRtmObject refers.
+                The values have the following meanings:
+                  other(1)   - not specified
+                  range1(2)  - less than boundary 1
+                  range2(3)  - between boundary 1 and 2
+                  range3(4)  - between boundary 2 and 3
+                  range4(5)  - between boundary 3 and 4
+                  range5(6)  - greater than boundary 4."
+        ::= { snaLuRtmEntry 16 }
+
+snaLuRtmNumTrans OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the total number of transactions
+                executed since the RTM monitoring began (i.e.,
+                snaLuRtmState changed to 'on(2)') for this LU."
+        ::= { snaLuRtmEntry 17 }
+
+snaLuRtmLastRspTime OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the response time for the last
+                transaction in units of 1/10th of a second."
+        ::= { snaLuRtmEntry 18 }
+
+snaLuRtmAvgRspTime OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+                "This value indicates the average response time for all
+                transactions in units of 1/10th of a second."
+        ::= { snaLuRtmEntry 19 }
+
+-- ***************************************************************
+-- Conformance information
+-- ***************************************************************
+
+snanauConformance       OBJECT IDENTIFIER ::= { snanauMIB 2 }
+
+snanauCompliances       OBJECT IDENTIFIER ::= {snanauConformance 1 }
+snanauGroups            OBJECT IDENTIFIER ::= {snanauConformance 2 }
+
+-- Compliance statements
+snanauCompliance  MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for the SNMPv2 entities
+                which implement the snanau MIB."
+        MODULE  -- this module
+
+--      Unconditionally mandatory groups
+                MANDATORY-GROUPS  { snaNodeGroup,
+                        snaLuGroup,
+                        snaSessionGroup }
+
+--      Conditionally mandatory groups
+                GROUP  snaPu20Group
+                DESCRIPTION
+                        "The snaPu20Group is mandatory only for those
+                        entities which implement PU type 2.0"
+                GROUP  snaMgtToolsRtmGroup
+                DESCRIPTION
+                        "The snaMgtToolsGroup is mandatory only for
+                        those entities which implement LU type 2
+                        and RTM."
+
+--      Refinement of requirements for objects access.
+--      The Agent which does not implement row creation for
+--      snaNodeAdminTable, snaNodeLinkAdminTable and
+--      snaLuAdminTable must at least accept
+--      objects modification (read-write access instead of
+--      read-create).
+
+                OBJECT  snaNodeAdminName
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminType
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminXidFormat
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminBlockNum
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminIdNum
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminEnablingMethod
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminLuTermDefault
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminMaxLu
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminHostDescription
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminStopMethod
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeAdminState
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeLinkAdminSpecific
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaNodeLinkAdminMaxPiu
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+                OBJECT  snaLuAdminName
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaLuAdminSnaName
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaLuAdminType
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaLuAdminDepType
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaLuAdminLocalAddress
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaLuAdminDisplayModel
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+
+                OBJECT  snaLuAdminTerm
+                MIN-ACCESS  read-write
+                DESCRIPTION
+                        "An Agent is required to implement read-write
+                        access to this object."
+        ::= {snanauCompliances 1 }
+
+-- Units of conformance
+
+snaNodeGroup  OBJECT-GROUP
+        OBJECTS  { snaNodeAdminName,
+                snaNodeAdminType,
+                snaNodeAdminXidFormat,
+                snaNodeAdminBlockNum,
+                snaNodeAdminIdNum,
+                snaNodeAdminEnablingMethod,
+                snaNodeAdminLuTermDefault,
+                snaNodeAdminMaxLu,
+                snaNodeAdminHostDescription,
+                snaNodeAdminStopMethod,
+                snaNodeAdminState,
+                snaNodeAdminRowStatus,
+                snaNodeAdminTableLastChange,
+                snaNodeOperName,
+                snaNodeOperType,
+                snaNodeOperXidFormat,
+                snaNodeOperBlockNum,
+                snaNodeOperIdNum,
+                snaNodeOperEnablingMethod,
+                snaNodeOperLuTermDefault,
+                snaNodeOperMaxLu,
+                snaNodeOperHostDescription,
+                snaNodeOperStopMethod,
+                snaNodeOperState,
+                snaNodeOperHostSscpId,
+                snaNodeOperStartTime,
+                snaNodeOperLastStateChange,
+                snaNodeOperActFailures,
+                snaNodeOperActFailureReason,
+                snaNodeOperTableLastChange,
+                snaNodeLinkAdminSpecific,
+                snaNodeLinkAdminMaxPiu,
+                snaNodeLinkAdminRowStatus,
+                snaNodeLinkAdminTableLastChange,
+                snaNodeLinkOperSpecific,
+                snaNodeLinkOperMaxPiu,
+                snaNodeLinkOperTableLastChange }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects providing the
+                instrumentation of SNA nodes."
+        ::= { snanauGroups 1 }
+
+snaLuGroup  OBJECT-GROUP
+        OBJECTS  { snaLuAdminName,
+                snaLuAdminSnaName,
+                snaLuAdminType,
+                snaLuAdminDepType,
+                snaLuAdminLocalAddress,
+                snaLuAdminDisplayModel,
+                snaLuAdminTerm,
+                snaLuAdminRowStatus,
+                snaLuOperName,
+                snaLuOperSnaName,
+                snaLuOperType,
+                snaLuOperDepType,
+                snaLuOperLocalAddress,
+                snaLuOperDisplayModel,
+                snaLuOperTerm,
+                snaLuOperState,
+                snaLuOperSessnCount }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects providing the
+                instrumentation of SNA LUs."
+        ::= { snanauGroups 2 }
+
+snaSessionGroup  OBJECT-GROUP
+        OBJECTS  { snaLuSessnRluIndex,
+                snaLuSessnIndex,
+                snaLuSessnLocalApplName,
+                snaLuSessnRemoteLuName,
+                snaLuSessnMaxSndRuSize,
+                snaLuSessnMaxRcvRuSize,
+                snaLuSessnSndPacingSize,
+                snaLuSessnRcvPacingSize,
+                snaLuSessnActiveTime,
+                snaLuSessnAdminState,
+                snaLuSessnOperState,
+                snaLuSessnSenseData,
+                snaLuSessnTerminationRu,
+                snaLuSessnUnbindType,
+                snaLuSessnLinkIndex,
+                snaLuSessnStatsSentBytes,
+                snaLuSessnStatsReceivedBytes,
+                snaLuSessnStatsSentRus,
+                snaLuSessnStatsReceivedRus,
+                snaLuSessnStatsSentNegativeResps,
+                snaLuSessnStatsReceivedNegativeResps }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects providing the
+                instrumentation of SNA sessions."
+        ::= { snanauGroups 3 }
+
+snaPu20Group  OBJECT-GROUP
+        OBJECTS  { snaPu20StatsSentBytes,
+                snaPu20StatsReceivedBytes,
+                snaPu20StatsSentPius,
+                snaPu20StatsReceivedPius,
+                snaPu20StatsSentNegativeResps,
+                snaPu20StatsReceivedNegativeResps,
+                snaPu20StatsActLus,
+                snaPu20StatsInActLus,
+                snaPu20StatsBindLus }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects providing the
+                instrumentation of PU 2.0."
+        ::= { snanauGroups 4 }
+
+snaMgtToolsRtmGroup  OBJECT-GROUP
+        OBJECTS  { snaLuRtmState,
+                snaLuRtmStateTime,
+                snaLuRtmDef,
+                snaLuRtmBoundary1,
+                snaLuRtmBoundary2,
+                snaLuRtmBoundary3,
+                snaLuRtmBoundary4,
+                snaLuRtmCounter1,
+                snaLuRtmCounter2,
+                snaLuRtmCounter3,
+                snaLuRtmCounter4,
+                snaLuRtmOverFlows,
+                snaLuRtmObjPercent,
+                snaLuRtmObjRange,
+                snaLuRtmNumTrans,
+                snaLuRtmLastRspTime,
+                snaLuRtmAvgRspTime }
+        STATUS  current
+        DESCRIPTION
+                "A collection of objects providing the
+                instrumentation of RTM for SNA LU 2.0."
+        ::= { snanauGroups 5 }
+
+-- end of conformance statement
+
+END
diff --git a/snmp_builder/mibs/SNA-SDLC-MIB.mib b/snmp_builder/mibs/SNA-SDLC-MIB.mib
new file mode 100644
index 0000000..a93fd7e
--- /dev/null
+++ b/snmp_builder/mibs/SNA-SDLC-MIB.mib
@@ -0,0 +1,2761 @@
+SNA-SDLC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32, TimeTicks
+        FROM SNMPv2-SMI
+    DisplayString, RowStatus, TimeInterval
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    mib-2, ifIndex, ifAdminStatus, ifOperStatus
+        FROM RFC1213-MIB;
+
+snaDLC MODULE-IDENTITY
+        LAST-UPDATED  "9411150000Z"
+        ORGANIZATION  "IETF SNA DLC MIB Working Group"
+        CONTACT-INFO
+                "        Wayne Clark
+
+                 Postal: cisco Systems, Inc.
+                         3100 Smoketree Ct.
+                         Suite 1000
+                         Raleigh, NC 27604
+                         US
+
+                    Tel: +1 919 878 6958
+
+                 E-Mail: wclark@cisco.com"
+        DESCRIPTION
+                "This is the MIB module for objects used to
+                 manage SDLC devices."
+::= { mib-2 41 }
+
+--
+--  The following data link controls are modelled in this MIB module:
+--
+--     1. SDLC
+--
+
+sdlc        OBJECT IDENTIFIER ::= { snaDLC 1 }
+
+--
+--  THE SDLC GROUP
+--  ==============
+--
+--  The following resources are modelled in the SDLC group of this
+--  MIB module:
+--
+--     1. PORTS
+--     2. LINK STATIONS
+
+sdlcPortGroup OBJECT IDENTIFIER ::= { sdlc 1 } -- Physical Ports
+sdlcLSGroup   OBJECT IDENTIFIER ::= { sdlc 2 } -- Logical Link Stations
+
+--
+--  THE SDLC PORT GROUP
+--  ===================
+--
+--  The following classes of information is modelled for each SDLC port:
+--
+--     1.  ADMINISTRATIVE ( read/write)
+--     2.  OPERATIONAL    ( read-only)
+--     3.  STATISTICS     ( read-only)
+
+--  Information not found in this group is found in tables described in
+--  the following RFCs:
+--
+--    1.  RFC1213  - MIB-II
+--
+--            TABLE                      INDEX
+--            ====================       ====================
+--        a.  ifTable                    ifIndex
+--
+--    2.  RFC1659  - The RS232-like MIB
+--
+--            TABLE                      INDEX
+--            ====================       ====================
+--        a.  rs232PortTable             rs232PortIndex
+--        b.  rs232SyncPortTable         rs232SyncPortIndex
+--        c.  rs232InSigTable            rs232InSigPortIndex,
+--                                       rs232InSigName
+--        d.  rs232OutSigTable           rs232OutSigPortIndex,
+--                                       rs232OutSigName
+--     ** e.  rs232AsyncPortTable        rs232AsyncPortIndex
+--
+--     ** rs232AsyncPortTable for ISO 3309.3 ( Start-Stop SDLC).
+
+--  *************************************************************
+--  *                                                           *
+--  *           THE SDLC PORT ADMINISTRATIVE TABLE              *
+--  *                                                           *
+--  *************************************************************
+
+sdlcPortAdminTable  OBJECT-TYPE
+                    SYNTAX      SEQUENCE OF SdlcPortAdminEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "This table contains objects that can be
+                        changed to manage an SDLC port.    Changing one
+                        of these parameters may take effect in the
+                        operating port immediately or may wait until
+                        the interface is restarted depending on the
+                        details of the implementation.
+
+                        Most of the objects in this read-write table
+                        have corresponding read-only objects in the
+                        sdlcPortOperTable that return the current
+                        operating value.
+
+                        The operating values may be different from
+                        these configured values if  a configured
+                        parameter was changed after the interface was
+                        started."
+                     ::= { sdlcPortGroup 1 }
+
+sdlcPortAdminEntry  OBJECT-TYPE
+                    SYNTAX      SdlcPortAdminEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "A list of configured values for an SDLC port."
+                    INDEX   { ifIndex }
+                    ::= { sdlcPortAdminTable 1 }
+
+SdlcPortAdminEntry  ::= SEQUENCE
+{
+        sdlcPortAdminName           DisplayString,
+        sdlcPortAdminRole           INTEGER,
+        sdlcPortAdminType           INTEGER,
+        sdlcPortAdminTopology       INTEGER,
+        sdlcPortAdminISTATUS        INTEGER,
+        sdlcPortAdminACTIVTO        TimeInterval,
+        sdlcPortAdminPAUSE          TimeInterval,
+        sdlcPortAdminSERVLIM        Integer32,
+        sdlcPortAdminSlowPollTimer  TimeInterval
+}
+
+sdlcPortAdminName   OBJECT-TYPE
+                    SYNTAX      DisplayString (SIZE (1..10))
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "An octet string that defines the physical port
+                        to which this interface is assigned.  It has
+                        implementation-specific significance. Its value
+                        shall be unique within the administered
+                        system.  It must contain only ASCII printable
+                        characters.  Should an implementation choose to
+                        accept a write operation  for this object, it
+                        causes the logical port definition associated
+                        with the table instance to be moved to  a
+                        different physical port.  A write operation
+                        shall not take effect until the port is cycled
+                        inactive."
+                    ::= { sdlcPortAdminEntry 1 }
+
+sdlcPortAdminRole   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        primary(1),
+                        secondary(2),
+                        negotiable(3)
+                    }
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the role that the link
+                        station shall assume the next time a connection
+                        is established.
+
+                        Even though this is defined as a port object,
+                        it is a link station attribute in the sense
+                        that a role is per link station.  However, it
+                        is not possible to vary link station roles on a
+                        particular port.  For example, if an SDLC port
+                        is configured to primary, all link stations on
+                        that port must be primary."
+                    ::= { sdlcPortAdminEntry 2 }
+
+sdlcPortAdminType   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+
+                         leased(1),
+                         switched(2)
+                    }
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter defines whether the SDLC port
+                        is to connect to a leased or switched line.  A
+                        write operation to this administrative  value
+                        shall not take effect until the SDLC port has
+                        been cycled inactive."
+                    DEFVAL { leased }
+                    ::= { sdlcPortAdminEntry 3 }
+
+sdlcPortAdminTopology  OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         pointToPoint(1),
+                         multipoint(2)
+                    }
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter defines whether the SDLC port is
+                        capable of operating in either a point-to-point
+                        or multipoint topology.
+
+                        sdlcPortAdminTopology == multipoint implies the
+                        port can also operate in a point-to-point
+                        topology.  sdlcPortAdminTopology ==
+                        pointToPoint does not imply the port can
+                        operate in a multipoint topology.
+
+                        A write operation to this administrative value
+                        shall not take effect until the SDLC port has
+                        been cycled inactive."
+                    DEFVAL { pointToPoint }
+                    ::= { sdlcPortAdminEntry 4 }
+
+sdlcPortAdminISTATUS  OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         inactive(1),
+                         active(2)
+                    }
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter controls the initial value of
+                        the administrative status, ifAdminStatus, of
+                        this SDLC port at port start-up.  Depending
+                        on the implementation, a write operation to
+                        this administrative object may not take effect
+                        until the SDLC port has been cycled inactive."
+                    DEFVAL { active }
+                    ::= { sdlcPortAdminEntry 5 }
+
+sdlcPortAdminACTIVTO    OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter defines the period of time (in
+                        1/100ths of a second) that the port will allow a
+                        switched line to remain inactive before
+                        disconnecting.  A switched line is considered
+                        to be inactive if there are no I-Frames being
+                        transferred.  A value of zero indicates no
+                        timeout.  Depending on the implementation, a
+                        write operation to this administered value may
+                        not take effect until the port is cycled
+                        inactive.
+
+                        This object only has meaning for SDLC ports
+                        where sdlcPortAdminType == switched
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, ACTIVTO.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP ACTIVTO is
+                        represented in seconds."
+                    DEFVAL { 0 }
+                    ::= { sdlcPortAdminEntry 6 }
+
+sdlcPortAdminPAUSE  OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This object defines the minimum elapsed time
+                        (in 1/100ths of a second) between any two
+                        traversals of the poll list for a primary SDLC
+                        port.  Depending on the implementation, a write
+                        operation to this administered value  may not
+                        take effect until the port is cycled inactive.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, PAUSE.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP PAUSE is
+                        represented in 1/10ths of a second.
+
+                        This object only has meaning for SDLC ports
+                        where sdlcPortAdminRole == primary "
+                    DEFVAL { 200 }
+                    ::= { sdlcPortAdminEntry 7 }
+
+sdlcPortAdminSERVLIM OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This object defines the number of times the
+                        active poll list will be traversed before
+                        polling a station on the slow poll list for a
+                        primary, multipoint SDLC port.  Depending  on
+                        the implementation, a write operation to this
+                        administered value  may not take effect until
+                        the port is cycled inactive.
+
+                        This object only has meaning for SDLC ports
+                        where
+                            sdlcPortAdminRole == primary
+                        and
+                            sdlcPortAdminTopology == multipoint "
+                    DEFVAL { 20 }
+                    ::= { sdlcPortAdminEntry 8 }
+
+sdlcPortAdminSlowPollTimer OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-write
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the elapsed time (in
+                        1/100ths of a second) between polls for failed
+                        secondary link station addresses.  Depending
+                        on the implementation, a write operation to
+                        this administered value  may not take effect
+                        until the port is cycled inactive.
+
+                        This object only has meaning for SDLC ports
+                        where
+                            sdlcPortAdminRole == primary
+                        and
+
+                            sdlcPortAdminTopology == multipoint "
+                    DEFVAL { 2000 }
+                    ::= { sdlcPortAdminEntry 9 }
+
+--  *************************************************************
+--  *                                                           *
+--  *                THE SDLC PORT OPERATIONAL TABLE            *
+--  *                                                           *
+--  *************************************************************
+
+sdlcPortOperTable   OBJECT-TYPE
+                    SYNTAX      SEQUENCE OF SdlcPortOperEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "This table contains current SDLC port
+                        parameters.  Many of these objects have
+                        corresponding objects inthe sdlcPortAdminTable."
+                    ::= { sdlcPortGroup 2 }
+
+sdlcPortOperEntry   OBJECT-TYPE
+                    SYNTAX      SdlcPortOperEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "Currently set parameters for a specific SDLC
+                        port."
+                    INDEX   { ifIndex }
+                    ::= { sdlcPortOperTable 1 }
+
+SdlcPortOperEntry   ::= SEQUENCE
+{
+        sdlcPortOperName                DisplayString,
+        sdlcPortOperRole                INTEGER,
+        sdlcPortOperType                INTEGER,
+        sdlcPortOperTopology            INTEGER,
+        sdlcPortOperISTATUS             INTEGER,
+        sdlcPortOperACTIVTO             TimeInterval,
+        sdlcPortOperPAUSE               TimeInterval,
+        sdlcPortOperSlowPollMethod      INTEGER,
+        sdlcPortOperSERVLIM             Integer32,
+        sdlcPortOperSlowPollTimer       TimeInterval,
+        sdlcPortOperLastModifyTime      TimeTicks,
+        sdlcPortOperLastFailTime        TimeTicks,
+        sdlcPortOperLastFailCause       INTEGER
+}
+
+sdlcPortOperName    OBJECT-TYPE
+                    SYNTAX      DisplayString (SIZE (1..8))
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "An octet string that describes the physical
+                        port to which this interface is currently
+                        attached.  It has  implementation-specific
+                        significance."
+                    ::= { sdlcPortOperEntry 1 }
+
+sdlcPortOperRole    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        primary(1),
+                        secondary(2),
+                        undefined(3)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the role that the link
+                        station has assumed on this connection.
+
+                        Even though this is defined as a port object,
+                        it is a link station attribute in the sense
+                        that a role is per link station.  However, it
+                        is not possible to vary link station roles on a
+                        particular port.  For example, if an SDLC port
+                        is configured to primary, all link stations on
+                        that port must be primary.
+
+                        The value of sdlcPortOperRole is undefined(3)
+                        whenever the link station role has not yet been
+                        established by the mode setting command."
+                    ::= { sdlcPortOperEntry 2 }
+
+sdlcPortOperType    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         leased(1),
+                         switched(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter defines whether the SDLC port
+                        is currently operating as though connected to a
+                        leased or switched line."
+                    ::= { sdlcPortOperEntry 3 }
+
+sdlcPortOperTopology  OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         pointToPoint(1),
+                         multipoint(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter defines whether the SDLC port is
+                        currently operating in a point-to-point or
+                        multipoint topology."
+                    ::= { sdlcPortOperEntry 4 }
+
+sdlcPortOperISTATUS OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         inactive(1),
+                         active(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter describes the initial value of
+                        the administrative status, ifAdminStatus, of
+                        this SDLC port at last port start-up."
+                    ::= { sdlcPortOperEntry 5 }
+
+sdlcPortOperACTIVTO OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter defines the period of time (in
+                        100ths of a second) that the port will allow a
+                        switched line to remain inactive before
+                        disconnecting.  A switched line is considered
+                        to be inactive if there are no I-Frames being
+                        transferred.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, ACTIVTO.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP ACTIVTO is
+                        represented in seconds.
+
+                        A value of zero indicates no timeout."
+                    ::= { sdlcPortOperEntry 6 }
+
+sdlcPortOperPAUSE   OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the current minimum
+                        elapsed time (in 1/100ths of a second) between
+                        any two traversals of the poll list for a
+                        primary SDLC port.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, PAUSE.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP PAUSE is
+                        represented in 1/10ths of a second.
+
+                        This object only has meaning for SDLC ports
+                        where
+                            sdlcPortAdminRole == primary "
+                    ::= { sdlcPortOperEntry 7 }
+
+sdlcPortOperSlowPollMethod OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         servlim(1),
+                         pollpause(2),
+                         other(3)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object defines the exact method that is in
+                        effect for periodically polling failed secondary
+                        link station addresses.
+
+                        If sdlcPortOperSlowPollMethod == servlim, then
+                        sdlcPortOperSERVLIM defines the actual polling
+                        characteristics.
+
+                        If sdlcPortOperSlowPollMethod == pollpause,
+                        then sdlcPortOperSlowPollTimer defines the
+                        actual polling characteristics.
+
+                        If sdlcPortOperSlowPollMethod == other, then
+                        the polling characteristics are modeled in
+
+                        vendor-specific objects.
+
+                        This object only has meaning for SDLC ports
+                        where
+                            sdlcPortOperRole == primary
+                        and
+                            sdlcPortOperTopology == multipoint "
+                    ::= { sdlcPortOperEntry 8 }
+
+sdlcPortOperSERVLIM OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the number of times the
+                        active poll list is currently being traversed
+                        before polling a station on the slow poll list
+                        for a primary, multipoint SDLC port.
+
+                        This object only has meaning for SDLC ports
+                        where
+                            sdlcPortOperRole == primary
+                        and
+                            sdlcPortOperTopology == multipoint "
+                    ::= { sdlcPortOperEntry 9 }
+
+sdlcPortOperSlowPollTimer OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the elapsed time (in
+                        1/100ths of a second) between polls for failed
+                        secondary link station addresses.
+
+                        This object only has meaning for SDLC ports
+                        where
+                            sdlcPortOperRole == primary
+                        and
+                            sdlcPortOperTopology == multipoint "
+                    ::= { sdlcPortOperEntry 10 }
+
+sdlcPortOperLastModifyTime    OBJECT-TYPE
+                    SYNTAX      TimeTicks
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the value of sysUpTime
+
+                         when this port definition was last modified.
+                         If the port has not been modified, then this
+                         value shall be zero."
+                    ::= { sdlcPortOperEntry 11 }
+
+sdlcPortOperLastFailTime    OBJECT-TYPE
+                    SYNTAX      TimeTicks
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the value of sysUpTime
+                        when this SDLC port last failed.  If the port
+                        has not failed, then this value shall be zero."
+                    ::= { sdlcPortOperEntry 12 }
+
+sdlcPortOperLastFailCause    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        undefined(1),
+                        physical(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This enumerated object describes the cause of
+                        the last failure of this SDLC port.  If the
+                        port has not failed, then this object has a
+                        value of undefined(1)."
+                    DEFVAL { undefined }
+                    ::= { sdlcPortOperEntry 13 }
+
+--  *************************************************************
+--  *                                                           *
+--  *           THE SDLC PORT STATISTICS TABLE                  *
+--  *                                                           *
+--  *************************************************************
+
+sdlcPortStatsTable  OBJECT-TYPE
+                    SYNTAX      SEQUENCE OF SdlcPortStatsEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "Each entry in this table contains statistics
+                        for a specific SDLC port."
+                     ::= { sdlcPortGroup 3 }
+
+sdlcPortStatsEntry  OBJECT-TYPE
+                    SYNTAX      SdlcPortStatsEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "A list of statistics for an SDLC port."
+                    INDEX   { ifIndex }
+                    ::= { sdlcPortStatsTable 1 }
+
+SdlcPortStatsEntry ::= SEQUENCE
+{
+        sdlcPortStatsPhysicalFailures Counter32,
+        sdlcPortStatsInvalidAddresses Counter32,
+        sdlcPortStatsDwarfFrames      Counter32,
+        sdlcPortStatsPollsIn          Counter32,
+        sdlcPortStatsPollsOut         Counter32,
+        sdlcPortStatsPollRspsIn       Counter32,
+        sdlcPortStatsPollRspsOut      Counter32,
+        sdlcPortStatsLocalBusies      Counter32,
+        sdlcPortStatsRemoteBusies     Counter32,
+        sdlcPortStatsIFramesIn        Counter32,
+        sdlcPortStatsIFramesOut       Counter32,
+        sdlcPortStatsOctetsIn         Counter32,
+        sdlcPortStatsOctetsOut        Counter32,
+        sdlcPortStatsProtocolErrs     Counter32,
+        sdlcPortStatsActivityTOs      Counter32,
+        sdlcPortStatsRNRLIMITs        Counter32,
+        sdlcPortStatsRetriesExps      Counter32,
+        sdlcPortStatsRetransmitsIn    Counter32,
+        sdlcPortStatsRetransmitsOut   Counter32
+}
+
+sdlcPortStatsPhysicalFailures OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of times
+                        this port has failed due to its physical media
+                        since port startup.  At port startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcPortStatsEntry 1 }
+
+sdlcPortStatsInvalidAddresses OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                        frames received by this port with invalid link
+                        station addresses."
+                    ::= { sdlcPortStatsEntry 2 }
+
+sdlcPortStatsDwarfFrames OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                        frames received by this port which were
+                        delivered intact by the physical layer but were
+                        too short to be legal.
+
+                        Ignoring the frame check sequence (FCS), a
+                        frame is considered to be too short if it
+                        is less than 2 bytes for sdlcLSOperMODULO of
+                        eight, or if it is less than 3 bytes for
+                        sdlcLSOperMODULO of onetwentyeight."
+                    ::= { sdlcPortStatsEntry 3 }
+
+sdlcPortStatsPollsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of polls
+                         received by this port since the port was
+                         created."
+                    ::= { sdlcPortStatsEntry 4 }
+
+sdlcPortStatsPollsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of polls
+                         sent by this port since the port was created."
+                    ::= { sdlcPortStatsEntry 5 }
+
+sdlcPortStatsPollRspsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of poll
+                         responses received by this port since the port
+                         was created."
+                    ::= { sdlcPortStatsEntry 6 }
+
+sdlcPortStatsPollRspsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of poll
+                         responses sent by this port since the port was
+                         created."
+                    ::= { sdlcPortStatsEntry 7 }
+
+sdlcPortStatsLocalBusies OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         times that the local SDLC link stations on
+                         this port have entered a busy state (RNR).
+                         This object is initialized to zero when the
+                         port is created."
+                    ::= { sdlcPortStatsEntry 8 }
+
+sdlcPortStatsRemoteBusies OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         times that the adjacent (i.e., remote) SDLC
+                         link stations on this port have entered a busy
+                         state (RNR).  This object is initialized to
+                         zero when the port is created."
+                    ::= { sdlcPortStatsEntry 9 }
+
+sdlcPortStatsIFramesIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         I-Frames that have been received by SDLC link
+                         stations on this port.  This object is
+                         initialized to zero when the port is created."
+                    ::= { sdlcPortStatsEntry 10 }
+
+sdlcPortStatsIFramesOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         I-Frames that have been transmitted by SDLC
+                         link stations on this port.  This object is
+                         initialized to zero when the port is created."
+                    ::= { sdlcPortStatsEntry 11 }
+
+sdlcPortStatsOctetsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total octets
+                         received from adjacent SDLC link stations on
+                         this port.  This object covers the address,
+                         control, and information field of I-Frames
+                         only.  This object is initialized to zero when
+                         the port is created."
+                    ::= { sdlcPortStatsEntry 12 }
+
+sdlcPortStatsOctetsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total octets
+                         transmitted to adjacent SDLC link stations on
+                         this port.  This object covers the address,
+                         control, and information field of I-Frames
+                         only.  This object is initialized to zero when
+                         the port is created."
+                    ::= { sdlcPortStatsEntry 13 }
+
+sdlcPortStatsProtocolErrs OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         times that the SDLC link stations on this port
+                         have deactivated the link as a result of
+                         having received a protocol violation from the
+                         adjacent link station.  This object is
+                         initialized to zero when the port is created."
+                    ::= { sdlcPortStatsEntry 14 }
+
+sdlcPortStatsActivityTOs OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         times that the SDLC link stations on this port
+                         have deactivated the link as a result of no
+                         activity on the link.  This object is
+                         initialized to zero when the port is created."
+                    ::= { sdlcPortStatsEntry 15 }
+
+sdlcPortStatsRNRLIMITs OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         times that the SDLC link stations on this port
+                         have deactivated the link as a result of its
+                         RNRLIMIT timer expiring.  This object is
+                         initialized to zero when the port is created."
+                    ::= { sdlcPortStatsEntry 16 }
+
+sdlcPortStatsRetriesExps OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         times that the SDLC link stations on this port
+                         have deactivated the link as a result of a
+                         retry sequence being exhausted.  This object
+                         is initialized to zero when the port is
+                         created."
+                    ::= { sdlcPortStatsEntry 17 }
+
+sdlcPortStatsRetransmitsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         I-Frames retransmitted by remote link stations
+                         for all SDLC link stations on this port.  This
+                         object is initialized to zero when the port is
+                         created."
+                    ::= { sdlcPortStatsEntry 18 }
+
+sdlcPortStatsRetransmitsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "This object reflects the total number of
+                         I-Frames retransmitted by all local SDLC link
+                         stations on this port.  This object is
+                         initialized to zero when the port is created."
+                    ::= { sdlcPortStatsEntry 19 }
+
+--
+--  THE SDLC LINK STATION GROUP
+--  ===========================
+--
+
+--  The following classes of information is modelled for each SDLC link
+--  station:
+--
+--     1.  ADMINISTRATIVE ( read-write)
+--     2.  OPERATIONAL    ( read-only)
+--     3.  STATISTICS     ( read-only)
+
+--  *************************************************************
+--  *                                                           *
+--  *        THE SDLC LINK STATION ADMINISTRATIVE TABLE         *
+--  *                                                           *
+--  *************************************************************
+
+sdlcLSAdminTable  OBJECT-TYPE
+                    SYNTAX      SEQUENCE OF SdlcLSAdminEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "This table contains objects that can be
+                        changed to manage an SDLC link station.
+                        Changing one of these parameters may take
+                        effect in the operating link immediately or may
+                        wait until the link is restarted depending on
+                        the details of the implementation.
+
+                        The entries in sdlcLSAdminTable can be created
+                        either by an agent or a management station. The
+                        management station can create an entry in
+                        sdlcLSAdminTable by setting the appropriate
+                        value in sdlcLSAdminRowStatus.
+
+                        Most of the objects in this read-create table
+                        have corresponding read-only objects in the
+                        sdlcLSOperTable that reflect the current
+                        operating value.
+
+                        The operating values may be different from
+                        these configured values if changed by XID
+                        negotiation or if a configured parameter was
+                        changed after the link was started."
+                    ::= { sdlcLSGroup 1 }
+
+sdlcLSAdminEntry    OBJECT-TYPE
+                    SYNTAX      SdlcLSAdminEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                         "A list of configured values for an SDLC link
+                         station."
+                    INDEX   { ifIndex, sdlcLSAddress }
+                    ::= { sdlcLSAdminTable 1 }
+
+SdlcLSAdminEntry ::= SEQUENCE
+{
+        sdlcLSAddress           INTEGER,
+        sdlcLSAdminName         DisplayString,
+        sdlcLSAdminState        INTEGER,
+        sdlcLSAdminISTATUS      INTEGER,
+        sdlcLSAdminMAXDATASend  Integer32,
+        sdlcLSAdminMAXDATARcv   Integer32,
+        sdlcLSAdminREPLYTO      TimeInterval,
+        sdlcLSAdminMAXIN        INTEGER,
+        sdlcLSAdminMAXOUT       INTEGER,
+        sdlcLSAdminMODULO       INTEGER,
+        sdlcLSAdminRETRIESm     INTEGER,
+        sdlcLSAdminRETRIESt     TimeInterval,
+        sdlcLSAdminRETRIESn     Integer32,
+        sdlcLSAdminRNRLIMIT     TimeInterval,
+        sdlcLSAdminDATMODE      INTEGER,
+        sdlcLSAdminGPoll        INTEGER,
+        sdlcLSAdminSimRim       INTEGER,
+        sdlcLSAdminXmitRcvCap   INTEGER,
+        sdlcLSAdminRowStatus    RowStatus
+}
+
+sdlcLSAddress       OBJECT-TYPE
+                    SYNTAX      INTEGER (1..255)
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                         "This value is the poll address of the
+                         secondary link station for this SDLC link.  It
+                         uniquely identifies the SDLC link station
+                         within a single SDLC port."
+                    ::= { sdlcLSAdminEntry 1 }
+
+sdlcLSAdminName     OBJECT-TYPE
+                    SYNTAX      DisplayString (SIZE (1..10))
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "An octet string that defines the local name of
+                        the SDLC link station.  This field may be sent
+                        in the XID3 control vector 0x0E, type 0xF7."
+                    ::= { sdlcLSAdminEntry 2 }
+
+sdlcLSAdminState    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         inactive(1),
+                         active(2)
+                    }
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the desired state of the
+                        SDLC station.  The managed system shall attempt
+                        to keep the operational state, sdlcLSOperState,
+                        consistent with this value."
+                    DEFVAL { active }
+                    ::= { sdlcLSAdminEntry 3 }
+
+sdlcLSAdminISTATUS  OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         inactive(1),
+                         active(2)
+                    }
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This parameter controls the desired state,
+                        sdlcLSAdminState, of the SDLC link station at
+                        link station start-up."
+                    DEFVAL { active }
+                    ::= { sdlcLSAdminEntry 4 }
+
+sdlcLSAdminMAXDATASend  OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object contains the maximum PDU size that
+                        the local link station thinks it can send to
+                        the adjacent link station before having
+                        received any XID from the ALS.  After the
+                        maximum PDU size that the ALS can receive is
+                        known (via XID exchange) that value is
+                        reflected in sdlcLSOperMAXDATASend and takes
+
+                        precedence over this object.
+
+                        This value includes the Transmission Header
+                        (TH) and the Request Header (RH)."
+                    ::= { sdlcLSAdminEntry 5 }
+
+sdlcLSAdminMAXDATARcv  OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object contains the maximum PDU size that
+                        the local link station can receive from the
+                        adjacent link station.  This value is sent in
+                        the XID to the ALS.
+
+                        This value includes the Transmission Header
+                        (TH) and the Request Header (RH)."
+                    ::= { sdlcLSAdminEntry 6 }
+
+sdlcLSAdminREPLYTO  OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the reply timeout (in
+                        1/100ths of a second) for an SDLC link
+                        station.  If the link station does not receive
+                        a response to a poll or message before the
+                        specified time expires then the appropriate
+                        error recovery shall be initiated.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, REPLYTO.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP REPLYTO is
+                        represented in 1/10ths of a second.
+
+                        Depending on the implementation, a write
+                        operation to this administered value  may not
+                        change the operational value, sdlcLSOperREPLYTO,
+                        until the link station is cycled inactive.
+
+                        This object only has meaning for SDLC ports
+                        where sdlcPortAdminRole == primary "
+                    DEFVAL { 100 }
+                    ::= { sdlcLSAdminEntry 7 }
+
+sdlcLSAdminMAXIN    OBJECT-TYPE
+                    SYNTAX      INTEGER (1..127)
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the maximum number of
+                        unacknowledged I-frames which an SDLC link
+                        station may receive.  This should range from 1
+                        to (sdlcLSAdminMODULO - 1).  This value is sent
+                        in the XID to the ALS.
+
+                        A write operation to this administered value
+                        will not change the operational value,
+                        sdlcLSOperMAXIN, until the link station is
+                        cycled inactive."
+                    DEFVAL { 7 }
+                    ::= { sdlcLSAdminEntry 8 }
+
+sdlcLSAdminMAXOUT   OBJECT-TYPE
+                    SYNTAX      INTEGER (1..127)
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the maximum number of
+                        consecutive unacknowledged I-frames which an
+                        SDLC link station shall send without an
+                        acknowledgement.  This shall range from 1 to
+                        (sdlcLSAdminMODULO - 1).
+
+                        For link stations on switched SDLC lines,
+                        certain implementions may choose to override
+                        this administered value with the value
+                        received in the XID exchange.
+
+                        Depending on the implementation, a write
+                        operation to this administered value may not
+                        change the operational value,
+                        sdlcLSOperMAXOUT, until the link station is
+                        cycled inactive.
+
+                        An implementation can support only modulo 8,
+                        only modulo 128, or both."
+                    DEFVAL { 1 }
+                    ::= { sdlcLSAdminEntry 9 }
+
+sdlcLSAdminMODULO   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+
+                        eight(8),
+                        onetwentyeight(128)
+                    }
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the modulus for an SDLC
+                        link station.  This modulus determines the size
+                        of the rotating acknowledgement window used the
+                        SDLC link station pair.
+
+                        A write operation to this administered value
+                        will not change the operational value,
+                        sdlcLSOperMODULO, until the link station is
+                        cycled inactive.
+
+                        An implementation can support only modulo 8,
+                        only modulo 128, or both."
+                    DEFVAL { eight }
+                    ::= { sdlcLSAdminEntry 10 }
+
+sdlcLSAdminRETRIESm OBJECT-TYPE
+                    SYNTAX      INTEGER (0..128)
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls number of retries in a
+                        retry sequence for the local SDLC link
+                        station.  A retry sequence is a series of
+                        retransmitted frames ( data or control) for
+                        which no positive acknowledgement is received.
+
+                        The number of times that the retry sequence is
+                        to be repeated is controlled by the object:
+                        sdlcLSAdminRETRIESn.  The interval between retry
+                        sequences is controlled by the object:
+                        sdlcLSAdminRETRIESt.
+
+                        A value of zero indicates no retries. If the
+                        value of sdlcLSAdminRETRIESm is zero, then the
+                        values of sdlcLSAdminRETRIESt and
+                        sdlcLSAdminRETRIESn should also be zero.
+
+                        Depending on the implementation, a write
+                        operation to this administered value  may not
+                        change the operational value,
+                        sdlcLSOperRETRIESm, until the link station is
+                        cycled inactive."
+                    DEFVAL { 15 }
+                    ::= { sdlcLSAdminEntry 11 }
+
+sdlcLSAdminRETRIESt OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the interval (in 1/100ths
+                        of a second) between retry sequences for the
+                        local SDLC link station if multiple retry
+                        sequences are specified .  A retry sequence is
+                        a series of retransmitted frames ( data or
+                        control) for which no positive acknowledgement
+                        is received.
+
+                        The number of repeated retries sequences is
+                        controlled by the object: sdlcLSAdminRETRIESn.
+                        The retries per sequence is controlled by the
+                        object:  sdlcLSAdminRETRIESm.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, RETRIESt.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP RETRIESt is
+                        represented in seconds.
+
+                        Depending on the implementation, a write
+                        operation to this administered value  may not
+                        change the operational value,
+                        sdlcLSOperRETRIESt, until the link station is
+                        cycled inactive."
+                    DEFVAL { 0 }
+                    ::= { sdlcLSAdminEntry 12 }
+
+sdlcLSAdminRETRIESn OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the number of times that
+                        a retry sequence is repeated for the local SDLC
+                        link station.  A retry sequence is a series of
+                        retransmitted frames ( data or control) for
+                        which no positive acknowledgement is received.
+
+                        The interval between retry sequences is
+                        controlled by the object: sdlcLSAdminRETRIESn.
+
+                        The retries per sequence is controlled by the
+                        object:  sdlcLSAdminRETRIESm.
+
+                        Depending on the implementation, a write
+                        operation to this administered value  may not
+                        change the operational value,
+                        sdlcLSOperRETRIESn, until the link station is
+                        cycled inactive."
+                    DEFVAL { 0 }
+                    ::= { sdlcLSAdminEntry 13 }
+
+sdlcLSAdminRNRLIMIT OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the length of time (in
+                        1/100ths of a second) that an SDLC link station
+                        will allow its adjacent link station to remain
+                        in a busy (RNR) state before declaring it
+                        inoperative.
+
+                        A value of sdlcLSAdminRNRLIMIT == 0 means there
+                        is no limit.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, RNRLIMIT.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP RNRLIMIT is
+                        represented in minutes.
+
+                        Depending on the implementation, a write
+                        operation to this administered value  may not
+                        change the operational value,
+                        sdlcLSOperRNRLIMIT, until the link station is
+                        cycled inactive."
+                    DEFVAL { 18000 }
+                    ::= { sdlcLSAdminEntry 14 }
+
+sdlcLSAdminDATMODE  OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        half(1),
+                        full(2)
+                    }
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls whether communications
+                        mode with the adjacent link station is
+                        two-way-alternate (half) or two-way-simultaneous
+                        (full).
+
+                        A write operation to this administered value
+                        will not change the operational value,
+                        sdlcLSOperDATMODE, until the link station is
+                        cycled inactive."
+                    DEFVAL { half }
+                    ::= { sdlcLSAdminEntry 15 }
+
+sdlcLSAdminGPoll    OBJECT-TYPE
+                    SYNTAX      INTEGER (0..254)
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the group poll address
+                        for this link station instance.  If group poll
+                        is not in effect for this link station
+                        instance, the value for sdlcLSAdminGPoll should
+                        be zero.
+
+                        Depending on the implementation, a write
+                        operation to this administered value may not
+                        change the operational value, sdlcLSOperGPoll,
+                        until the link station is cycled inactive."
+                    ::= { sdlcLSAdminEntry 16 }
+
+sdlcLSAdminSimRim   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         no(1),
+                         yes(2)
+                    }
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the support for
+                        transmission and receipt of SIM and RIM control
+                        frames for this link station.  The value of
+                        this object controls the setting of the
+                        transmit-receive capability sent in the XID
+                        field."
+                    DEFVAL { no }
+                    ::= { sdlcLSAdminEntry 17 }
+
+sdlcLSAdminXmitRcvCap OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         twa(1),
+                         tws(2)
+                    }
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the transmit-receive
+                        capabilities for this SDLC link station.  The
+                        value of this object establishes the value of
+                        the transmit-receive capability indicator sent
+                        in the XID image to the adjacent link station."
+                    DEFVAL { twa }
+                    ::= { sdlcLSAdminEntry 18 }
+
+sdlcLSAdminRowStatus OBJECT-TYPE
+                    SYNTAX      RowStatus
+                    MAX-ACCESS  read-create
+                    STATUS      current
+                    DESCRIPTION
+                        "This object is used by a management station to
+                        create or delete the row entry in
+                        sdlcLSAdminTable following the RowStatus
+                        textual convention.
+
+                        Upon successful creation of the row, an agent
+                        automatically creates a corresponding entry in
+                        the sdlcLSOperTable with sdlcLSOperState equal
+                        to 'discontacted (1)'."
+                    ::= { sdlcLSAdminEntry 19 }
+
+--  *************************************************************
+--  *                                                           *
+--  *           THE SDLC LINK STATION OPERATIONAL TABLE         *
+--  *                                                           *
+--  *************************************************************
+
+sdlcLSOperTable     OBJECT-TYPE
+                    SYNTAX      SEQUENCE OF SdlcLSOperEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                          "This table contains current SDLC link
+                          parameters.  Many of these objects have
+                          corresponding objects in the
+                          sdlcLSAdminTable."
+                    ::= { sdlcLSGroup 2 }
+
+sdlcLSOperEntry     OBJECT-TYPE
+                    SYNTAX      SdlcLSOperEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                         "A list of status and control values for an
+                         SDLC link station."
+                    INDEX   { ifIndex, sdlcLSAddress }
+                    ::= { sdlcLSOperTable 1 }
+
+SdlcLSOperEntry     ::= SEQUENCE
+{
+        sdlcLSOperName                  DisplayString,
+        sdlcLSOperRole                  INTEGER,
+        sdlcLSOperState                 INTEGER,
+        sdlcLSOperMAXDATASend           Integer32,
+        sdlcLSOperREPLYTO               TimeInterval,
+        sdlcLSOperMAXIN                 INTEGER,
+        sdlcLSOperMAXOUT                INTEGER,
+        sdlcLSOperMODULO                INTEGER,
+        sdlcLSOperRETRIESm              INTEGER,
+        sdlcLSOperRETRIESt              TimeInterval,
+        sdlcLSOperRETRIESn              INTEGER,
+        sdlcLSOperRNRLIMIT              TimeInterval,
+        sdlcLSOperDATMODE               INTEGER,
+        sdlcLSOperLastModifyTime        TimeTicks,
+        sdlcLSOperLastFailTime          TimeTicks,
+        sdlcLSOperLastFailCause         INTEGER,
+        sdlcLSOperLastFailCtrlIn        OCTET STRING,
+        sdlcLSOperLastFailCtrlOut       OCTET STRING,
+        sdlcLSOperLastFailFRMRInfo      OCTET STRING,
+        sdlcLSOperLastFailREPLYTOs      Counter32,
+        sdlcLSOperEcho                  INTEGER,
+        sdlcLSOperGPoll                 INTEGER,
+        sdlcLSOperSimRim                INTEGER,
+        sdlcLSOperXmitRcvCap            INTEGER
+}
+
+sdlcLSOperName      OBJECT-TYPE
+                    SYNTAX      DisplayString (SIZE (1..10))
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                         "An octet string that defines the name of the
+                         remote SDLC link station.  This field is
+                         received in the XID3 control vector 0x0E, type
+                         0xF7."
+                    ::= { sdlcLSOperEntry 1 }
+
+sdlcLSOperRole      OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        primary(1),
+                        secondary(2),
+                        undefined(3)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current role that the
+                        link station is assuming.
+
+                        The value of sdlcLSOperRole is undefined(3)
+                        whenever the link station role has not yet been
+                        established by the mode setting command."
+                    ::= { sdlcLSOperEntry 2 }
+
+sdlcLSOperState     OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        discontacted(1),
+                        contactPending(2),
+                        contacted(3),
+                        discontactPending(4)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the operational state of
+                        the SDLC link station.  The managed system
+                        shall attempt to keep this value consistent
+                        with the administered state, sdlcLSAdminState"
+                    ::= { sdlcLSOperEntry 3 }
+
+sdlcLSOperMAXDATASend   OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object contains the actual maximum PDU
+                        size that the local link station can send to
+                        the adjacent link station.  This object is
+                        established from the value received in the XID
+                        from the adjacent link station.  If no XID
+                        is received, then this value is implementation
+                        dependent (for instance, it could be the value
+                        of sdlcLSAdminMAXDATASend).
+
+                        This value includes the Transmission Header
+                        (TH) and the Request Header (RH)."
+                    ::= { sdlcLSOperEntry 4 }
+
+sdlcLSOperREPLYTO   OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current reply timeout
+                        (in 1/100ths of a second) for an SDLC link
+                        station.  If the link station does not receive
+                        a response to a poll or message before the
+                        specified time expires then the appropriate
+                        error recovery shall be initiated.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, REPLYTO.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP REPLYTO is
+                        represented in 1/10ths of a second.
+
+                        This object only has meaning for SDLC ports
+                        where sdlcPortOperRole == primary "
+                    ::= { sdlcLSOperEntry 5 }
+
+sdlcLSOperMAXIN    OBJECT-TYPE
+                    SYNTAX      INTEGER (1..127)
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current maximum
+                        number of unacknowledged I-frames which an SDLC
+                        link station may receive.  This shall range
+                        from 1 to (sdlcLSOperMODULO - 1)."
+                    ::= { sdlcLSOperEntry 6 }
+
+sdlcLSOperMAXOUT    OBJECT-TYPE
+                    SYNTAX      INTEGER (1..127)
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls the maximum number of
+                        consecutive unacknowledged I-frames which an
+                        SDLC link station shall send without an
+                        acknowledgement.  This shall range from 1 to
+                        (sdlcLSAdminMODULO - 1).
+
+                        This value may controlled by the administered
+                        MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
+                        received during the XID exchange."
+                    ::= { sdlcLSOperEntry 7 }
+
+sdlcLSOperMODULO   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        eight(8),
+                        onetwentyeight(128)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current modulus for
+                        an SDLC link station.  This modulus determines
+                        the size of rotating acknowledgement window
+                        used by the SDLC link station pair."
+                     DEFVAL { eight }
+                    ::= { sdlcLSOperEntry 8 }
+
+sdlcLSOperRETRIESm  OBJECT-TYPE
+                    SYNTAX      INTEGER (0..128)
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object controls number of retries in a
+                        retry sequence for an SDLC link station.  A
+                        retry sequence is a series of retransmitted
+                        frames ( data or control) for which no positive
+                        acknowledgement is received.
+
+                        The current number of times that the retry
+                        sequence is to be repeated is reflected by the
+                        object:  sdlcLSOperRETRIESn.  The current
+                        interval between retry sequences is reflected
+                        by the object:  sdlcLSOperRETRIESt."
+                    ::= { sdlcLSOperEntry 9 }
+
+sdlcLSOperRETRIESt  OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current interval (in
+                        1/100ths of a second) between retry sequences
+                        for an SDLC link station if multiple retry
+                        sequences are specified.  A retry sequence is a
+
+                        series of retransmitted frames ( data or
+                        control) for which no positive acknowledgement
+                        is received.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, RETRIESt.  Please
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP RETRIESt is
+                        represented in seconds.
+
+                        The current number of repeated retries
+                        sequences is reflected by the object:
+                        sdlcLSOperRETRIESn.  The current retries per
+                        sequence is reflected by the object:
+                        sdlcLSOperRETRIESm."
+                    ::= { sdlcLSOperEntry 10 }
+
+sdlcLSOperRETRIESn OBJECT-TYPE
+                    SYNTAX      INTEGER (0..127)
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current number of
+                        times that a retry sequence is repeated for an
+                        SDLC link station.  A retry sequence is a
+                        series of retransmitted frames ( data or
+                        control) for which no positive acknowledgement
+                        is received.
+
+                        The current interval between retry sequences is
+                        reflected by the object: sdlcLSOperRETRIESn.
+                        The current retries per sequence is reflected
+                        by the object:  sdlcLSOperRETRIESm."
+                    ::= { sdlcLSOperEntry 11 }
+
+sdlcLSOperRNRLIMIT  OBJECT-TYPE
+                    SYNTAX      TimeInterval
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the current length of
+                        time (in 1/100ths of a second) that an SDLC
+                        link station will allow its adjacent link
+                        station to remain in a busy (RNR) state before
+                        declaring it inoperative.
+
+                        The object descriptor contains the name of an
+                        NCP configuration parameter, RNRLIMIT.  Please
+
+                        note that the value of this object represents
+                        1/100ths of a second while the NCP RNRLIMIT is
+                        represented in minutes.
+
+                        A value of sdlcLSOperRNRLIMIT == 0 means there
+                        is no limit."
+                    ::= { sdlcLSOperEntry 12 }
+
+sdlcLSOperDATMODE   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                        half(1),
+                        full(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects whether the current
+                        communications mode with the adjacent link
+                        station is two-way-alternate (half) or
+                        two-way-simultaneous (full)."
+                    ::= { sdlcLSOperEntry 13 }
+
+sdlcLSOperLastModifyTime    OBJECT-TYPE
+                    SYNTAX      TimeTicks
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the value of sysUpTime
+                         when this link station definition was last
+                         modified.  If the link station has not been
+                         modified, then this value shall be zero."
+                    ::= { sdlcLSOperEntry 14 }
+
+sdlcLSOperLastFailTime    OBJECT-TYPE
+                    SYNTAX      TimeTicks
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the value of sysUpTime
+                         when this SDLC link station last failed.  If
+                         the link station has not failed, then this
+                         value shall be zero."
+                    ::= { sdlcLSOperEntry 15 }
+
+sdlcLSOperLastFailCause    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+
+                        undefined(1),
+                        rxFRMR(2),
+                        txFRMR(3),
+                        noResponse(4),
+                        protocolErr(5),
+                        noActivity(6),
+                        rnrLimit(7),
+                        retriesExpired(8)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This enumerated object reflects the cause of
+                        the last failure of this SDLC link station.  If
+                        the link station has not failed, then this
+                        object will have a value of undefined(1)."
+                    DEFVAL { undefined }
+                    ::= { sdlcLSOperEntry 16 }
+
+sdlcLSOperLastFailCtrlIn  OBJECT-TYPE
+                    SYNTAX      OCTET STRING (SIZE(1..2))
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the last control octet or
+                        octets (depending on modulus) received by this
+                        SDLC link station at the time of the last
+                        failure.  If the link station has not failed,
+                        then this value has no meaning."
+                    ::= { sdlcLSOperEntry 17 }
+
+sdlcLSOperLastFailCtrlOut  OBJECT-TYPE
+                    SYNTAX      OCTET STRING (SIZE(1..2))
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the last control octet or
+                        octets (depending on modulus) sent by this SDLC
+                        link station at the time of the last failure.
+                        If the link station has not failed, then this
+                        value has no meaning."
+                    ::= { sdlcLSOperEntry 18 }
+
+sdlcLSOperLastFailFRMRInfo  OBJECT-TYPE
+                    SYNTAX      OCTET STRING (SIZE(3))
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the information field of
+                        the FRMR frame if the last failure for this
+                        SDLC link station was as a result of an invalid
+                        frame.  Otherwise, this field has no meaning."
+                    ::= { sdlcLSOperEntry 19 }
+
+sdlcLSOperLastFailREPLYTOs  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the number of times that
+                        the REPLYTO timer had expired for an SDLC link
+                        station at the time of the last failure. If the
+                        link station has not failed, then this value
+                        has no meaning."
+                    ::= { sdlcLSOperEntry 20 }
+
+sdlcLSOperEcho      OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         no(1),
+                         yes(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object identifies whether the echo bit is
+                         in effect for this particular link station."
+                    DEFVAL { no }
+                    ::= { sdlcLSOperEntry 21 }
+
+sdlcLSOperGPoll     OBJECT-TYPE
+                    SYNTAX      INTEGER (0..254)
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object describes the group poll address
+                        in effect for this link station instance."
+                    DEFVAL { 0 }
+                    ::= { sdlcLSOperEntry 22 }
+
+sdlcLSOperSimRim    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         no(1),
+                         yes(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the support for
+                        transmission and receipt of SIM and RIM control
+                        frames for the adjacent link station.  The
+                        value of this object is set from the XID field
+                        received from the adjacent link station."
+                    DEFVAL { no }
+                    ::= { sdlcLSOperEntry 23 }
+
+sdlcLSOperXmitRcvCap OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    {
+                         twa(1),
+                         tws(2)
+                    }
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the transmit-receive
+                        capabilities for the adjacent SDLC link
+                        station.  The value of this object is the value
+                        of the transmit-receive capability indicator
+                        received in the XID image from the adjacent
+                        link station."
+                    DEFVAL { twa }
+                    ::= { sdlcLSOperEntry 24 }
+
+--  *************************************************************
+--  *                                                           *
+--  *           THE SDLC LINK STATION STATISTICS TABLE          *
+--  *                                                           *
+--  *************************************************************
+
+sdlcLSStatsTable  OBJECT-TYPE
+                    SYNTAX      SEQUENCE OF SdlcLSStatsEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "Each entry in this table contains statistics
+                        for a specific SDLC link station."
+                     ::= { sdlcLSGroup 3 }
+
+sdlcLSStatsEntry  OBJECT-TYPE
+                    SYNTAX      SdlcLSStatsEntry
+                    MAX-ACCESS  not-accessible
+                    STATUS      current
+                    DESCRIPTION
+                        "A list of statistics for an SDLC link station."
+                    INDEX   { ifIndex, sdlcLSAddress }
+                    ::= { sdlcLSStatsTable 1 }
+
+SdlcLSStatsEntry ::= SEQUENCE
+{
+        sdlcLSStatsBLUsIn             Counter32,
+        sdlcLSStatsBLUsOut            Counter32,
+        sdlcLSStatsOctetsIn           Counter32,
+        sdlcLSStatsOctetsOut          Counter32,
+        sdlcLSStatsPollsIn            Counter32,
+        sdlcLSStatsPollsOut           Counter32,
+        sdlcLSStatsPollRspsIn         Counter32,
+        sdlcLSStatsPollRspsOut        Counter32,
+        sdlcLSStatsLocalBusies        Counter32,
+        sdlcLSStatsRemoteBusies       Counter32,
+        sdlcLSStatsIFramesIn          Counter32,
+        sdlcLSStatsIFramesOut         Counter32,
+        sdlcLSStatsUIFramesIn         Counter32,
+        sdlcLSStatsUIFramesOut        Counter32,
+        sdlcLSStatsXIDsIn             Counter32,
+        sdlcLSStatsXIDsOut            Counter32,
+        sdlcLSStatsTESTsIn            Counter32,
+        sdlcLSStatsTESTsOut           Counter32,
+        sdlcLSStatsREJsIn             Counter32,
+        sdlcLSStatsREJsOut            Counter32,
+        sdlcLSStatsFRMRsIn            Counter32,
+        sdlcLSStatsFRMRsOut           Counter32,
+        sdlcLSStatsSIMsIn             Counter32,
+        sdlcLSStatsSIMsOut            Counter32,
+        sdlcLSStatsRIMsIn             Counter32,
+        sdlcLSStatsRIMsOut            Counter32,
+        sdlcLSStatsDISCIn             Counter32,
+        sdlcLSStatsDISCOut            Counter32,
+        sdlcLSStatsUAIn               Counter32,
+        sdlcLSStatsUAOut              Counter32,
+        sdlcLSStatsDMIn               Counter32,
+        sdlcLSStatsDMOut              Counter32,
+        sdlcLSStatsSNRMIn             Counter32,
+        sdlcLSStatsSNRMOut            Counter32,
+        sdlcLSStatsProtocolErrs       Counter32,
+        sdlcLSStatsActivityTOs        Counter32,
+        sdlcLSStatsRNRLIMITs          Counter32,
+        sdlcLSStatsRetriesExps        Counter32,
+        sdlcLSStatsRetransmitsIn      Counter32,
+        sdlcLSStatsRetransmitsOut     Counter32
+
+}
+
+sdlcLSStatsBLUsIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total basic link
+                        units (BLUs; frames) received from an adjacent
+                        SDLC link station since link station startup.
+                        At link station startup time, this object must
+                        be initialized to zero."
+                    ::= { sdlcLSStatsEntry 1 }
+
+sdlcLSStatsBLUsOut   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total basic link
+                        units (BLUs; frames), transmitted to an
+                        adjacent SDLC link station since link station
+                        startup.  At link station startup time, this
+                        object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 2 }
+
+sdlcLSStatsOctetsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total octets received
+                        from an adjacent SDLC link station since link
+                        station startup.  This object covers the
+                        address, control, and information field of
+                        I-Frames only.  At link station startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 3 }
+
+sdlcLSStatsOctetsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total octets
+                        transmitted to an adjacent SDLC link station
+                        since link station startup.  This object covers
+                        the address, control, and information field of
+
+                        I-Frames only.  At link station startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 4 }
+
+sdlcLSStatsPollsIn  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total polls received
+                        from an adjacent SDLC link station since link
+                        station startup.  At link station startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 5 }
+
+sdlcLSStatsPollsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total polls sent to
+                        an adjacent SDLC link station since link
+                        station startup.  At link station startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 6 }
+
+sdlcLSStatsPollRspsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of poll
+                        responses sent to the adjacent SDLC link
+                        station since link station startup.  This value
+                        includes I-frames that are sent in response to
+                        a poll.
+
+                        At link station startup time, this object must
+                        be initialized to zero."
+                    ::= { sdlcLSStatsEntry 7 }
+
+sdlcLSStatsPollRspsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of poll
+                        responses received from the adjacent SDLC link
+
+                        station since station startup.  This value
+                        includes I-frames that are received in response
+                        to a poll.
+
+                        At link station startup time, this object must
+                        be initialized to zero."
+                    ::= { sdlcLSStatsEntry 8 }
+
+sdlcLSStatsLocalBusies OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of times
+                        that the local SDLC link station has entered a
+                        busy state (RNR) since link station startup.
+                        At link station startup time, this object must
+                        be initialized to zero."
+                    ::= { sdlcLSStatsEntry 9 }
+
+sdlcLSStatsRemoteBusies OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of times
+                        that an adjacent ( remote) SDLC link station
+                        has entered a busy state (RNR) since link
+                        station startup.  At link station startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 10 }
+
+sdlcLSStatsIFramesIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total I-frames
+                        received from an adjacent SDLC link station
+                        since link station startup.  At link station
+                        startup time, this object must be initialized
+                        to zero."
+                    ::= { sdlcLSStatsEntry 11 }
+
+sdlcLSStatsIFramesOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total I-frames
+                        transmitted to an adjacent SDLC link station
+                        since link station startup.  At link station
+                        startup time, this object must be initialized
+                        to zero."
+                    ::= { sdlcLSStatsEntry 12 }
+
+sdlcLSStatsUIFramesIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total UI-frames
+                        received from an adjacent SDLC link station
+                        since link station startup."
+                    ::= { sdlcLSStatsEntry 13 }
+
+sdlcLSStatsUIFramesOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                       "This object reflects the total UI-frames
+                       transmitted to an adjacent SDLC link station
+                       since link station startup."
+                    ::= { sdlcLSStatsEntry 14 }
+
+sdlcLSStatsXIDsIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total XID frames
+                        received from an adjacent SDLC link station
+                        since link station startup."
+                    ::= { sdlcLSStatsEntry 15 }
+
+sdlcLSStatsXIDsOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total XID frames
+                        transmitted to an adjacent SDLC link station
+                        since link station startup."
+                    ::= { sdlcLSStatsEntry 16 }
+
+sdlcLSStatsTESTsIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total TEST frames,
+                        commands or responses, received from an
+                        adjacent SDLC link station since link station
+                        startup."
+                    ::= { sdlcLSStatsEntry 17 }
+
+sdlcLSStatsTESTsOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total TEST frames,
+                        commands or responses, transmitted to an
+                        adjacent SDLC link station since link station
+                        startup."
+                    ::= { sdlcLSStatsEntry 18 }
+
+sdlcLSStatsREJsIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total REJ frames
+                        received from an adjacent SDLC link station
+                        since link station startup."
+                    ::= { sdlcLSStatsEntry 19 }
+
+sdlcLSStatsREJsOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total REJ frames
+                        transmitted to an adjacent SDLC link station
+                        since link station startup."
+                    ::= { sdlcLSStatsEntry 20 }
+
+sdlcLSStatsFRMRsIn  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total frame reject
+
+                        (FRMR) frames received from an adjacent SDLC
+                        link station since link station startup."
+                    ::= { sdlcLSStatsEntry 21 }
+
+sdlcLSStatsFRMRsOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total frame reject
+                        (FRMR) frames transmitted to an adjacent SDLC
+                        link station since link station startup."
+                    ::= { sdlcLSStatsEntry 22 }
+
+sdlcLSStatsSIMsIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total set
+                        initialization mode (SIM) frames received from
+                        an adjacent SDLC link station since link station
+                        startup."
+                    ::= { sdlcLSStatsEntry 23 }
+
+sdlcLSStatsSIMsOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total set
+                        initialization mode (SIM) frames transmitted to
+                        an adjacent SDLC link station since link station
+                        startup.  At link station startup time, this
+                        object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 24 }
+
+sdlcLSStatsRIMsIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total request
+                        initialization mode (RIM) frames received from
+                        an adjacent SDLC link station since link station
+                        startup.  At link station startup time, this
+                        object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 25 }
+
+sdlcLSStatsRIMsOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total request
+                        initialization mode (RIM) frames transmitted to
+                        an adjacent SDLC link station since link station
+                        startup.  At link station startup time, this
+                        object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 26 }
+
+sdlcLSStatsDISCIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         disconnect (DISC) requests received from an
+                         adjacent SDLC link station since link station
+                         startup.  At link station startup time, this
+                         object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 27 }
+
+sdlcLSStatsDISCOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         disconnect (DISC) requests transmited to an
+                         adjacent SDLC link station since link station
+                         startup.  At link station startup time, this
+                         object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 28 }
+
+sdlcLSStatsUAIn     OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         unnumbered acknowledgements (UA) requests
+                         received from an adjacent SDLC link station
+                         since link station startup.  At link station
+                         startup time, this object must be initialized
+                         to zero."
+                    ::= { sdlcLSStatsEntry 29 }
+
+sdlcLSStatsUAOut    OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         unnumbered acknowledgements (UA) requests
+                         transmited to an adjacent SDLC link station
+                         since link station startup.  At link station
+                         startup time, this object must be initialized
+                         to zero."
+                    ::= { sdlcLSStatsEntry 30 }
+
+sdlcLSStatsDMIn     OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         disconnect mode (DM) requests received from an
+                         adjacent SDLC link station since link station
+                         startup.  At link station startup time, this
+                         object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 31 }
+
+sdlcLSStatsDMOut    OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         disconnect mode (DM) requests transmited to an
+                         adjacent SDLC link station since link station
+                         startup.  At link station startup time, this
+                         object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 32 }
+
+sdlcLSStatsSNRMIn   OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         set normal response mode (SNRM/SNRME) requests
+                         received from an adjacent SDLC link station
+                         since link station startup.  At link station
+                         startup time, this object must be initialized
+                         to zero."
+                    ::= { sdlcLSStatsEntry 33 }
+
+sdlcLSStatsSNRMOut  OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         set normal response mode (SNRM/SNRME) requests
+                         transmited to an adjacent SDLC link station
+                         since link station startup.  At link station
+                         startup time, this object must be initialized
+                         to zero."
+                    ::= { sdlcLSStatsEntry 34 }
+
+sdlcLSStatsProtocolErrs OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total occurrences,
+                        since link station startup, where this SDLC
+                        link station has inactivated the link as a
+                        result of receiving a frame from its adjacent
+                        link station which was in violation of the
+                        protocol.  At link station startup time, this
+                        object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 35 }
+
+sdlcLSStatsActivityTOs OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total occurrences,
+                        since startup, where this SDLC link station has
+                        inactivated the link as a result of no activity
+                        on the link.  At link station startup time,
+                        this object must be initialized to zero."
+                    ::= { sdlcLSStatsEntry 36 }
+
+sdlcLSStatsRNRLIMITs OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total occurrences,
+                        since startup, where this SDLC link station has
+
+                        inactivated the link as a result of its
+                        RNRLIMIT timer expiring.  At link station
+                        startup time, this object must be initialized
+                        to zero."
+                    ::= { sdlcLSStatsEntry 37 }
+
+sdlcLSStatsRetriesExps OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total occurrences,
+                        since startup, where this SDLC link station has
+                        inactivated the link as a result of a retry
+                        sequence being exhausted.  At link station
+                        startup time, this object must be initialized
+                        to zero."
+                    ::= { sdlcLSStatsEntry 38 }
+
+sdlcLSStatsRetransmitsIn OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         information frames retransmitted by the remote
+                         link station because the N(s) received from
+                         that link station indicated that one or more
+                         information frames sent by that station were
+                         lost.  This event causes the first missing
+                         information frame of a window and all
+                         subsequent information frames to be
+                         retransmitted.  At link station startup time,
+                         this object must be initialized to zero.
+
+                         Management: If the value of
+                         sdlcLSStatsRetransmitsIn grows over time, then
+                         the quality of the serial line is in
+                         question.  You might want to look at
+                         decreasing the value for
+                         sdlcLSAdminMAXDATASend to compensate for the
+                         lower quality line."
+                    ::= { sdlcLSStatsEntry 39 }
+
+sdlcLSStatsRetransmitsOut OBJECT-TYPE
+                    SYNTAX      Counter32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION
+                        "This object reflects the total number of
+                         information frames retransmitted to a remote
+                         link station because the N(r) received from
+                         that link station indicated that one or more
+                         information frames sent to that station were
+                         lost. This event causes the first missing
+                         information frame of a window and all
+                         subsequent information frames to be
+                         retransmitted.  At link station startup time,
+                         this object must be initialized to zero.
+
+                         Management: If the value of
+                         sdlcLSStatsRetransmitsOut grows over time,
+                         then the quality of the serial line is in
+                         question.  You might want to look at
+                         decreasing the value for sdlcLSAdminMAXDATASend
+                         to compensate for the lower quality line."
+                    ::= { sdlcLSStatsEntry 40 }
+
+--
+--  TRAP DEFINITIONS
+--
+
+--
+--  Notifications
+--
+
+sdlcTraps  OBJECT IDENTIFIER ::= { sdlc 3 }
+
+sdlcPortStatusChange NOTIFICATION-TYPE
+                     OBJECTS    { ifIndex,
+                                  ifAdminStatus,
+                                  ifOperStatus,
+                                  sdlcPortOperLastFailTime,
+                                  sdlcPortOperLastFailCause
+                                }
+                     STATUS  current
+                     DESCRIPTION
+                         "This trap indicates that the state of an SDLC
+                         port has transitioned to active or inactive."
+                     ::= { sdlcTraps 1 }
+
+sdlcLSStatusChange   NOTIFICATION-TYPE
+                     OBJECTS    { ifIndex,
+                                  sdlcLSAddress,
+                                  sdlcLSOperState,
+                                  sdlcLSAdminState,
+                                  sdlcLSOperLastFailTime,
+                                  sdlcLSOperLastFailCause,
+                                  sdlcLSOperLastFailFRMRInfo,
+                                  sdlcLSOperLastFailCtrlIn,
+                                  sdlcLSOperLastFailCtrlOut,
+                                  sdlcLSOperLastFailREPLYTOs
+                                }
+                     STATUS  current
+                     DESCRIPTION
+                         "This trap indicates that the state of an SDLC
+                         link station has transitioned to contacted or
+                         discontacted."
+                     ::= { sdlcTraps 2 }
+
+--
+-- Conformance Information
+--
+
+sdlcConformance OBJECT IDENTIFIER ::= { sdlc 4 }
+
+sdlcCompliances   OBJECT IDENTIFIER ::= { sdlcConformance 1 }
+sdlcGroups        OBJECT IDENTIFIER ::= { sdlcConformance 2 }
+
+--
+-- Compliance Statements
+--
+
+sdlcCoreCompliance MODULE-COMPLIANCE
+                     STATUS current
+                     DESCRIPTION
+                         "The core compliance statement for all SDLC
+                         nodes."
+                     MODULE
+                         MANDATORY-GROUPS
+                         {
+                             sdlcCorePortAdminGroup,
+                             sdlcCorePortOperGroup,
+                             sdlcCorePortStatsGroup,
+                             sdlcCoreLSAdminGroup,
+                             sdlcCoreLSOperGroup,
+                             sdlcCoreLSStatsGroup
+                         }
+
+                     OBJECT      sdlcPortAdminName
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcPortAdminRole
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcPortAdminType
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcPortAdminTopology
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcPortAdminISTATUS
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAddress
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminName
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminState
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminISTATUS
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminMAXDATASend
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminMAXDATARcv
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminMAXIN
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminMAXOUT
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminMODULO
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminRETRIESm
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminRETRIESt
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminRETRIESn
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminRNRLIMIT
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminDATMODE
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminGPoll
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminSimRim
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminRowStatus
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+                     ::= { sdlcCompliances 1 }
+
+sdlcPrimaryCompliance  MODULE-COMPLIANCE
+                     STATUS current
+                     DESCRIPTION
+                         "The compliance statement for all nodes that
+                         are performing the role of a Primary link
+                         station."
+                     MODULE
+                         MANDATORY-GROUPS { sdlcPrimaryGroup }
+
+                     OBJECT      sdlcPortAdminPAUSE
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcLSAdminREPLYTO
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+                     ::= { sdlcCompliances 2 }
+
+sdlcPrimaryMultipointCompliance  MODULE-COMPLIANCE
+                     STATUS current
+                     DESCRIPTION
+                         "The compliance statement for all nodes that
+                         are performing the role of a primary link
+                         station on a multipoint line."
+                     MODULE
+                         MANDATORY-GROUPS { sdlcPrimaryMultipointGroup }
+
+                     OBJECT      sdlcPortAdminSERVLIM
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+
+                     OBJECT      sdlcPortAdminSlowPollTimer
+                     MIN-ACCESS  read-only
+                     DESCRIPTION
+                         "Write access is not required."
+                     ::= { sdlcCompliances 3 }
+
+--
+-- Core Conformance Groups for All Link Stations
+--
+
+sdlcCoreGroups OBJECT IDENTIFIER ::= { sdlcGroups 1 }
+
+sdlcCorePortAdminGroup OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcPortAdminName,      sdlcPortAdminRole,
+                         sdlcPortAdminType,      sdlcPortAdminTopology,
+                         sdlcPortAdminISTATUS
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcCorePortAdminGroup defines objects
+                         which are common to the PortAdmin group of all
+                         compliant link stations."
+                     ::= { sdlcCoreGroups 1 }
+
+sdlcCorePortOperGroup OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcPortOperName,
+                         sdlcPortOperRole,
+                         sdlcPortOperType,
+                         sdlcPortOperTopology,
+                         sdlcPortOperISTATUS,
+                         sdlcPortOperACTIVTO,
+                         sdlcPortOperLastFailTime,
+                         sdlcPortOperLastFailCause
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcCorePortOperGroup defines objects
+                         which are common to the PortOper group of all
+                         compliant link stations."
+                     ::= { sdlcCoreGroups 2 }
+
+sdlcCorePortStatsGroup OBJECT-GROUP
+                     OBJECTS
+
+                     {
+                         sdlcPortStatsPhysicalFailures,
+                         sdlcPortStatsInvalidAddresses,
+                         sdlcPortStatsDwarfFrames
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcCorePortStatsGroup defines objects
+                         which are common to the PortStats group of all
+                         compliant link stations."
+                     ::= { sdlcCoreGroups 3 }
+
+sdlcCoreLSAdminGroup OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcLSAddress,
+                         sdlcLSAdminName,
+                         sdlcLSAdminState,
+                         sdlcLSAdminISTATUS,
+                         sdlcLSAdminMAXDATASend,
+                         sdlcLSAdminMAXDATARcv,
+                         sdlcLSAdminMAXIN,
+                         sdlcLSAdminMAXOUT,
+                         sdlcLSAdminMODULO,
+                         sdlcLSAdminRETRIESm,
+                         sdlcLSAdminRETRIESt,
+                         sdlcLSAdminRETRIESn,
+                         sdlcLSAdminRNRLIMIT,
+                         sdlcLSAdminDATMODE,
+                         sdlcLSAdminGPoll,
+                         sdlcLSAdminSimRim,
+                         sdlcLSAdminRowStatus
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcCorePortAdminGroup defines objects
+                         which are common to the PortAdmin group of all
+                         compliant link stations."
+                     ::= { sdlcCoreGroups 4 }
+
+sdlcCoreLSOperGroup  OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcLSOperRole,
+                         sdlcLSOperState,
+                         sdlcLSOperMAXDATASend,
+                         sdlcLSOperMAXIN,
+                         sdlcLSOperMAXOUT,
+                         sdlcLSOperMODULO,
+                         sdlcLSOperRETRIESm,
+                         sdlcLSOperRETRIESt,
+                         sdlcLSOperRETRIESn,
+                         sdlcLSOperRNRLIMIT,
+                         sdlcLSOperDATMODE,
+                         sdlcLSOperLastFailTime,
+                         sdlcLSOperLastFailCause,
+                         sdlcLSOperLastFailCtrlIn,
+                         sdlcLSOperLastFailCtrlOut,
+                         sdlcLSOperLastFailFRMRInfo,
+                         sdlcLSOperLastFailREPLYTOs,
+                         sdlcLSOperEcho,
+                         sdlcLSOperGPoll
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcCorePortOperGroup defines objects
+                         which are common to the PortOper group of all
+                         compliant link stations."
+                     ::= { sdlcCoreGroups 5 }
+
+sdlcCoreLSStatsGroup OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcLSStatsBLUsIn,
+                         sdlcLSStatsBLUsOut,
+                         sdlcLSStatsOctetsIn,
+                         sdlcLSStatsOctetsOut,
+                         sdlcLSStatsPollsIn,
+                         sdlcLSStatsPollsOut,
+                         sdlcLSStatsPollRspsIn,
+                         sdlcLSStatsPollRspsOut,
+                         sdlcLSStatsLocalBusies,
+                         sdlcLSStatsRemoteBusies,
+                         sdlcLSStatsIFramesIn,
+                         sdlcLSStatsIFramesOut,
+                         sdlcLSStatsRetransmitsIn,
+                         sdlcLSStatsRetransmitsOut,
+                         sdlcLSStatsUIFramesIn,
+                         sdlcLSStatsUIFramesOut,
+                         sdlcLSStatsXIDsIn,
+                         sdlcLSStatsXIDsOut,
+                         sdlcLSStatsTESTsIn,
+                         sdlcLSStatsTESTsOut,
+                         sdlcLSStatsREJsIn,
+                         sdlcLSStatsREJsOut,
+                         sdlcLSStatsFRMRsIn,
+                         sdlcLSStatsFRMRsOut,
+                         sdlcLSStatsSIMsIn,
+                         sdlcLSStatsSIMsOut,
+                         sdlcLSStatsRIMsIn,
+                         sdlcLSStatsRIMsOut,
+                         sdlcLSStatsProtocolErrs,
+                         sdlcLSStatsRNRLIMITs,
+                         sdlcLSStatsRetriesExps
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcCorePortStatsGroup defines objects
+                         which are common to the PortStats group of all
+                         compliant link stations."
+                     ::= { sdlcCoreGroups 6 }
+
+--
+-- Conformance Groups for Primary Link Stations
+--
+
+sdlcPrimaryGroups OBJECT IDENTIFIER ::= { sdlcGroups 2 }
+
+sdlcPrimaryGroup OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcPortAdminPAUSE,
+                         sdlcPortOperPAUSE,
+                         sdlcLSAdminREPLYTO,
+                         sdlcLSOperREPLYTO
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcPrimaryGroup defines objects which
+                         are common to all compliant primary link
+                         stations."
+                     ::= { sdlcPrimaryGroups 1 }
+
+sdlcPrimaryMultipointGroup OBJECT-GROUP
+                     OBJECTS
+                     {
+                         sdlcPortAdminSERVLIM,
+                         sdlcPortAdminSlowPollTimer,
+                         sdlcPortOperSlowPollMethod,
+                         sdlcPortOperSERVLIM,
+                         sdlcPortOperSlowPollTimer
+
+                     }
+                     STATUS current
+                     DESCRIPTION
+                         "The sdlcPrimaryMultipointGroup defines objects
+                         which are common to all compliant primary link
+                         stations that are in a multipoint topology."
+                     ::= { sdlcPrimaryGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-COMMUNITY-MIB.mib b/snmp_builder/mibs/SNMP-COMMUNITY-MIB.mib
new file mode 100644
index 0000000..a4a50c3
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-COMMUNITY-MIB.mib
@@ -0,0 +1,505 @@
+      SNMP-COMMUNITY-MIB DEFINITIONS ::= BEGIN
+
+      IMPORTS
+          IpAddress,
+          MODULE-IDENTITY,
+          OBJECT-TYPE,
+          Integer32,
+          snmpModules
+              FROM SNMPv2-SMI
+          RowStatus,
+          StorageType
+              FROM SNMPv2-TC
+          SnmpAdminString,
+          SnmpEngineID
+              FROM SNMP-FRAMEWORK-MIB
+          SnmpTagValue,
+          snmpTargetAddrEntry
+              FROM SNMP-TARGET-MIB
+          MODULE-COMPLIANCE,
+          OBJECT-GROUP
+              FROM SNMPv2-CONF;
+
+      snmpCommunityMIB MODULE-IDENTITY
+          LAST-UPDATED "200308060000Z"        -- 06 Aug 2003, midnight
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-email:   snmpv3@lists.tislabs.com
+                  Subscribe:  majordomo@lists.tislabs.com
+                              In msg body:  subscribe snmpv3
+
+                  Co-Chair:   Russ Mundy
+                              SPARTA, Inc
+                  Postal:     7075 Samuel Morse Drive
+                              Columbia, MD 21045
+                              USA
+                  EMail:      mundy@tislabs.com
+                  Phone:      +1 410-872-1515
+
+                  Co-Chair:   David Harrington
+                              Enterasys Networks
+                  Postal:     35 Industrial Way
+                              P. O. Box 5005
+                              Rochester, New Hampshire 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  Phone:      +1 603-337-2614
+
+                  Co-editor:  Rob Frye
+                              Vibrant Solutions
+
+                  Postal:     2711 Prosperity Ave
+                              Fairfax, Virginia 22031
+                              USA
+                  E-mail:     rfrye@vibrant-1.com
+                  Phone:      +1-703-270-2000
+
+                  Co-editor:  David B. Levi
+                              Nortel Networks
+                  Postal:     3505 Kesterwood Drive
+                              Knoxville, Tennessee 37918
+                  E-mail:     dlevi@nortelnetworks.com
+                  Phone:      +1 865 686 0432
+
+                  Co-editor:  Shawn A. Routhier
+                              Wind River Systems, Inc.
+                  Postal:     500 Wind River Way
+                              Alameda, CA 94501
+                  E-mail:     sar@epilogue.com
+                  Phone:      +1 510 749 2095
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  Postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+                  Email:      bwijnen@lucent.com
+                  Phone:      +31-348-407-775
+                 "
+        DESCRIPTION
+            "This MIB module defines objects to help support
+             coexistence between SNMPv1, SNMPv2c, and SNMPv3.
+
+             Copyright (C) The Internet Society (2003) This
+             version of this MIB module is part of RFC 3584;
+             see the RFC itself for full legal notices."
+
+        REVISION "200308060000Z" -- 06 Aug 2003
+        DESCRIPTION
+            "Updated the LAST-UPDATED, CONTACT-INFO, and REVISION
+             clauses and added a copyright notice to the
+             DESCRIPTION clause of the MIB module's
+             MODULE-IDENTITY invocation.
+
+             Updated the description of snmpCommunityTransportTag
+             to make it consistent with the rest of the document.
+
+             Updated the description of `snmpTargetAddrMMS' to
+
+             clarify that a value of 0 means that the maximum
+             message size is unknown.
+
+             Changed the name of 'snmpCommunityGroup' to
+             snmpCommunityTableGroup to avoid a name conflict
+             with the SNMPv2-MIB.
+
+             Updated DESCRIPTION of snmpCommunityName.
+
+             Updated DESCRIPTION of snmpTrapCommunity.
+
+             Added snmpCommunityMIBFullCompliance.
+
+             This version published as RFC 3584."
+
+        REVISION "200003060000Z" -- 6 Mar 2000
+        DESCRIPTION "This version published as RFC 2576."
+    ::= { snmpModules 18 }
+
+-- Administrative assignments ************************************
+
+snmpCommunityMIBObjects
+        OBJECT IDENTIFIER ::= { snmpCommunityMIB 1 }
+
+snmpCommunityMIBConformance
+        OBJECT IDENTIFIER ::= { snmpCommunityMIB 2 }
+
+--
+-- The snmpCommunityTable contains a database of community
+-- strings.  This table provides mappings between community
+-- strings, and the parameters required for View-based Access
+-- Control.
+--
+
+snmpCommunityTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF SnmpCommunityEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The table of community strings configured in the SNMP
+         engine's Local Configuration Datastore (LCD)."
+    ::= { snmpCommunityMIBObjects 1 }
+
+snmpCommunityEntry OBJECT-TYPE
+    SYNTAX       SnmpCommunityEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular community string."
+    INDEX       { IMPLIED snmpCommunityIndex }
+    ::= { snmpCommunityTable 1 }
+
+SnmpCommunityEntry ::= SEQUENCE {
+    snmpCommunityIndex               SnmpAdminString,
+    snmpCommunityName                OCTET STRING,
+    snmpCommunitySecurityName        SnmpAdminString,
+    snmpCommunityContextEngineID     SnmpEngineID,
+    snmpCommunityContextName         SnmpAdminString,
+    snmpCommunityTransportTag        SnmpTagValue,
+    snmpCommunityStorageType         StorageType,
+    snmpCommunityStatus              RowStatus
+}
+
+snmpCommunityIndex OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The unique index value of a row in this table."
+    ::= { snmpCommunityEntry 1 }
+
+snmpCommunityName OBJECT-TYPE
+    SYNTAX       OCTET STRING
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The community string for which a row in this table
+         represents a configuration.  There is no SIZE constraint
+         specified for this object because RFC 1157 does not
+         impose any explicit limitation on the length of community
+         strings (their size is constrained indirectly by the
+         SNMP message size)."
+    ::= { snmpCommunityEntry 2 }
+
+snmpCommunitySecurityName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "A human readable string representing the corresponding
+         value of snmpCommunityName in a Security Model
+         independent format."
+    ::= { snmpCommunityEntry 3 }
+
+snmpCommunityContextEngineID OBJECT-TYPE
+    SYNTAX       SnmpEngineID
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The contextEngineID indicating the location of the
+         context in which management information is accessed
+         when using the community string specified by the
+         corresponding instance of snmpCommunityName.
+
+         The default value is the snmpEngineID of the entity in
+         which this object is instantiated."
+    ::= { snmpCommunityEntry 4 }
+
+snmpCommunityContextName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The context in which management information is accessed
+         when using the community string specified by the
+         corresponding instance of snmpCommunityName."
+    DEFVAL      { ''H }   -- the empty string
+    ::= { snmpCommunityEntry 5 }
+
+snmpCommunityTransportTag OBJECT-TYPE
+    SYNTAX       SnmpTagValue
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object specifies a set of transport endpoints
+         which are used in two ways:
+            - to specify the transport endpoints from which an
+              SNMP entity will accept management requests, and
+            - to specify the transport endpoints to which a
+              notification may be sent using the community
+              string matching the corresponding instance of
+              snmpCommunityName.
+         In either case, if the value of this object has
+         zero-length, transport endpoints are not checked when
+         either authenticating messages containing this community
+         string, nor when generating notifications.
+
+         The transports identified by this object are specified
+         in the snmpTargetAddrTable.  Entries in that table
+         whose snmpTargetAddrTagList contains this tag value
+         are identified.
+
+         If a management request containing a community string
+
+         that matches the corresponding instance of
+         snmpCommunityName is received on a transport endpoint
+         other than the transport endpoints identified by this
+         object the request is deemed unauthentic.
+
+         When a notification is to be sent using an entry in
+         this table, if the destination transport endpoint of
+         the notification does not match one of the transport
+         endpoints selected by this object, the notification
+         is not sent."
+    DEFVAL      { ''H }   -- the empty string
+    ::= { snmpCommunityEntry 6 }
+
+snmpCommunityStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The storage type for this conceptual row in the
+         snmpCommunityTable.  Conceptual rows having the value
+         'permanent' need not allow write-access to any
+         columnar object in the row."
+    ::= { snmpCommunityEntry 7 }
+
+snmpCommunityStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The status of this conceptual row in the
+         snmpCommunityTable.
+
+         An entry in this table is not qualified for activation
+         until instances of all corresponding columns have been
+         initialized, either through default values, or through
+         Set operations.  The snmpCommunityName and
+         snmpCommunitySecurityName objects must be explicitly set.
+
+         There is no restriction on setting columns in this table
+         when the value of snmpCommunityStatus is active(1)."
+    ::= { snmpCommunityEntry 8 }
+
+--
+-- The snmpTargetAddrExtTable
+--
+
+snmpTargetAddrExtTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF SnmpTargetAddrExtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The table of mask and maximum message size (mms) values
+         associated with the snmpTargetAddrTable.
+
+         The snmpTargetAddrExtTable augments the
+         snmpTargetAddrTable with a transport address mask value
+         and a maximum message size value.  The transport address
+         mask allows entries in the snmpTargetAddrTable to define
+         a set of addresses instead of just a single address.
+         The maximum message size value allows the maximum
+         message size of another SNMP entity to be configured for
+         use in SNMPv1 (and SNMPv2c) transactions, where the
+         message format does not specify a maximum message size."
+    ::= { snmpCommunityMIBObjects 2 }
+
+snmpTargetAddrExtEntry OBJECT-TYPE
+    SYNTAX       SnmpTargetAddrExtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular mask and mms value."
+    AUGMENTS       { snmpTargetAddrEntry }
+    ::= { snmpTargetAddrExtTable 1 }
+
+SnmpTargetAddrExtEntry ::= SEQUENCE {
+    snmpTargetAddrTMask              OCTET STRING,
+    snmpTargetAddrMMS                Integer32
+}
+
+snmpTargetAddrTMask OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The mask value associated with an entry in the
+         snmpTargetAddrTable.  The value of this object must
+         have the same length as the corresponding instance of
+         snmpTargetAddrTAddress, or must have length 0.  An
+         attempt to set it to any other value will result in
+         an inconsistentValue error.
+
+         The value of this object allows an entry in the
+         snmpTargetAddrTable to specify multiple addresses.
+         The mask value is used to select which bits of
+         a transport address must match bits of the corresponding
+         instance of snmpTargetAddrTAddress, in order for the
+
+         transport address to match a particular entry in the
+         snmpTargetAddrTable.  Bits which are 1 in the mask
+         value indicate bits in the transport address which
+         must match bits in the snmpTargetAddrTAddress value.
+         Bits which are 0 in the mask indicate bits in the
+         transport address which need not match.  If the
+         length of the mask is 0, the mask should be treated
+         as if all its bits were 1 and its length were equal
+         to the length of the corresponding value of
+         snmpTargetAddrTable.
+
+         This object may not be modified while the value of the
+         corresponding instance of snmpTargetAddrRowStatus is
+         active(1).  An attempt to set this object in this case
+         will result in an inconsistentValue error."
+    DEFVAL { ''H }
+    ::= { snmpTargetAddrExtEntry 1 }
+
+snmpTargetAddrMMS OBJECT-TYPE
+    SYNTAX      Integer32 (0|484..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum message size value associated with an entry
+         in the snmpTargetAddrTable.  Note that a value of 0 means
+         that the maximum message size is unknown."
+    DEFVAL { 484 }
+    ::= { snmpTargetAddrExtEntry 2 }
+
+--
+-- The snmpTrapAddress and snmpTrapCommunity objects are included
+-- in notifications that are forwarded by a proxy, which were
+-- originally received as SNMPv1 Trap messages.
+--
+
+snmpTrapAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The value of the agent-addr field of a Trap PDU which
+         is forwarded by a proxy forwarder application using
+         an SNMP version other than SNMPv1.  The value of this
+         object SHOULD contain the value of the agent-addr field
+         from the original Trap PDU as generated by an SNMPv1
+         agent."
+    ::= { snmpCommunityMIBObjects 3 }
+
+snmpTrapCommunity OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+        "The value of the community string field of an SNMPv1
+         message containing a Trap PDU which is forwarded by a
+         a proxy forwarder application using an SNMP version
+         other than SNMPv1.  The value of this object SHOULD
+         contain the value of the community string field from
+         the original SNMPv1 message containing a Trap PDU as
+         generated by an SNMPv1 agent.  There is no SIZE
+         constraint specified for this object because RFC 1157
+         does not impose any explicit limitation on the length
+         of community strings (their size is constrained
+         indirectly by the SNMP message size)."
+    ::= { snmpCommunityMIBObjects 4 }
+
+-- Conformance Information **************************************
+
+snmpCommunityMIBCompliances OBJECT IDENTIFIER
+                            ::= { snmpCommunityMIBConformance 1 }
+snmpCommunityMIBGroups      OBJECT IDENTIFIER
+                            ::= { snmpCommunityMIBConformance 2 }
+
+-- Compliance statements
+
+snmpCommunityMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+        "The compliance statement for SNMP engines which
+         implement the SNMP-COMMUNITY-MIB."
+
+    MODULE       -- this module
+        MANDATORY-GROUPS { snmpCommunityTableGroup }
+
+        OBJECT           snmpCommunityName
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           snmpCommunitySecurityName
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           snmpCommunityContextEngineID
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           snmpCommunityContextName
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           snmpCommunityTransportTag
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           snmpCommunityStorageType
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           snmpCommunityStatus
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+    ::= { snmpCommunityMIBCompliances 1 }
+
+snmpProxyTrapForwardCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+        "The compliance statement for SNMP engines which
+         contain a proxy forwarding application which is
+         capable of forwarding SNMPv1 traps using SNMPv2c
+         or SNMPv3."
+    MODULE       -- this module
+        MANDATORY-GROUPS { snmpProxyTrapForwardGroup }
+    ::= { snmpCommunityMIBCompliances 2 }
+
+snmpCommunityMIBFullCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+        "The compliance statement for SNMP engines which
+         implement the SNMP-COMMUNITY-MIB with full read-create
+         access."
+
+    MODULE       -- this module
+        MANDATORY-GROUPS { snmpCommunityTableGroup }
+    ::= { snmpCommunityMIBCompliances 3 }
+
+snmpCommunityTableGroup OBJECT-GROUP
+    OBJECTS {
+        snmpCommunityName,
+        snmpCommunitySecurityName,
+        snmpCommunityContextEngineID,
+        snmpCommunityContextName,
+        snmpCommunityTransportTag,
+        snmpCommunityStorageType,
+        snmpCommunityStatus,
+        snmpTargetAddrTMask,
+        snmpTargetAddrMMS
+    }
+    STATUS       current
+    DESCRIPTION
+        "A collection of objects providing for configuration
+         of community strings for SNMPv1 (and SNMPv2c) usage."
+    ::= { snmpCommunityMIBGroups 1 }
+
+snmpProxyTrapForwardGroup OBJECT-GROUP
+    OBJECTS {
+        snmpTrapAddress,
+        snmpTrapCommunity
+    }
+    STATUS       current
+    DESCRIPTION
+        "Objects which are used by proxy forwarding applications
+         when translating traps between SNMP versions.  These are
+         used to preserve SNMPv1-specific information when
+         translating to SNMPv2c or SNMPv3."
+    ::= { snmpCommunityMIBGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-FRAMEWORK-MIB.mib b/snmp_builder/mibs/SNMP-FRAMEWORK-MIB.mib
new file mode 100644
index 0000000..aa273c2
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-FRAMEWORK-MIB.mib
@@ -0,0 +1,526 @@
+SNMP-FRAMEWORK-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    OBJECT-IDENTITY,
+    snmpModules                           FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                    FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP       FROM SNMPv2-CONF;
+
+snmpFrameworkMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-EMail:   snmpv3@lists.tislabs.com
+                  Subscribe:  snmpv3-request@lists.tislabs.com
+
+                  Co-Chair:   Russ Mundy
+                              Network Associates Laboratories
+                  postal:     15204 Omega Drive, Suite 300
+                              Rockville, MD 20850-4601
+                              USA
+                  EMail:      mundy@tislabs.com
+                  phone:      +1 301-947-7107
+
+                  Co-Chair &
+                  Co-editor:  David Harrington
+                              Enterasys Networks
+                  postal:     35 Industrial Way
+                              P. O. Box 5005
+                              Rochester, New Hampshire 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  phone:      +1 603-337-2614
+
+                  Co-editor:  Randy Presuhn
+                              BMC Software, Inc.
+                  postal:     2141 North First Street
+                              San Jose, California 95131
+                              USA
+                  EMail:      randy_presuhn@bmc.com
+                  phone:      +1 408-546-1006
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+
+                  EMail:      bwijnen@lucent.com
+                  phone:      +31 348-680-485
+                    "
+       DESCRIPTION  "The SNMP Management Architecture MIB
+
+                     Copyright (C) The Internet Society (2002). This
+                     version of this MIB module is part of RFC 3411;
+                     see the RFC itself for full legal notices.
+                    "
+
+       REVISION     "200210140000Z"         -- 14 October 2002
+       DESCRIPTION  "Changes in this revision:
+                     - Updated various administrative information.
+                     - Corrected some typos.
+                     - Corrected typo in description of SnmpEngineID
+                       that led to range overlap for 127.
+                     - Changed '255a' to '255t' in definition of
+                       SnmpAdminString to align with current SMI.
+                     - Reworded 'reserved' for value zero in
+                       DESCRIPTION of SnmpSecurityModel.
+                     - The algorithm for allocating security models
+                       should give 256 per enterprise block, rather
+                       than 255.
+                     - The example engine ID of 'abcd' is not
+                       legal. Replaced with '800002b804616263'H based
+                       on example enterprise 696, string 'abc'.
+                     - Added clarification that engineID should
+                       persist across re-initializations.
+                     This revision published as RFC 3411.
+                    "
+       REVISION     "199901190000Z"         -- 19 January 1999
+       DESCRIPTION  "Updated editors' addresses, fixed typos.
+                     Published as RFC 2571.
+                    "
+       REVISION     "199711200000Z"         -- 20 November 1997
+       DESCRIPTION  "The initial version, published in RFC 2271.
+                    "
+       ::= { snmpModules 10 }
+
+   -- Textual Conventions used in the SNMP Management Architecture ***
+
+SnmpEngineID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "An SNMP engine's administratively-unique identifier.
+                 Objects of this type are for identification, not for
+                 addressing, even though it is possible that an
+                 address may have been used in the generation of
+                 a specific value.
+
+                 The value for this object may not be all zeros or
+                 all 'ff'H or the empty (zero length) string.
+
+                 The initial value for this object may be configured
+                 via an operator console entry or via an algorithmic
+                 function.  In the latter case, the following
+                 example algorithm is recommended.
+
+                 In cases where there are multiple engines on the
+                 same system, the use of this algorithm is NOT
+                 appropriate, as it would result in all of those
+                 engines ending up with the same ID value.
+
+                 1) The very first bit is used to indicate how the
+                    rest of the data is composed.
+
+                    0 - as defined by enterprise using former methods
+                        that existed before SNMPv3. See item 2 below.
+
+                    1 - as defined by this architecture, see item 3
+                        below.
+
+                    Note that this allows existing uses of the
+                    engineID (also known as AgentID [RFC1910]) to
+                    co-exist with any new uses.
+
+                 2) The snmpEngineID has a length of 12 octets.
+
+                    The first four octets are set to the binary
+                    equivalent of the agent's SNMP management
+                    private enterprise number as assigned by the
+                    Internet Assigned Numbers Authority (IANA).
+                    For example, if Acme Networks has been assigned
+                    { enterprises 696 }, the first four octets would
+                    be assigned '000002b8'H.
+
+                    The remaining eight octets are determined via
+                    one or more enterprise-specific methods. Such
+                    methods must be designed so as to maximize the
+                    possibility that the value of this object will
+                    be unique in the agent's administrative domain.
+                    For example, it may be the IP address of the SNMP
+                    entity, or the MAC address of one of the
+                    interfaces, with each address suitably padded
+                    with random octets.  If multiple methods are
+                    defined, then it is recommended that the first
+                    octet indicate the method being used and the
+                    remaining octets be a function of the method.
+
+                 3) The length of the octet string varies.
+
+                    The first four octets are set to the binary
+                    equivalent of the agent's SNMP management
+                    private enterprise number as assigned by the
+                    Internet Assigned Numbers Authority (IANA).
+                    For example, if Acme Networks has been assigned
+                    { enterprises 696 }, the first four octets would
+                    be assigned '000002b8'H.
+
+                    The very first bit is set to 1. For example, the
+                    above value for Acme Networks now changes to be
+                    '800002b8'H.
+
+                    The fifth octet indicates how the rest (6th and
+                    following octets) are formatted. The values for
+                    the fifth octet are:
+
+                      0     - reserved, unused.
+
+                      1     - IPv4 address (4 octets)
+                              lowest non-special IP address
+
+                      2     - IPv6 address (16 octets)
+                              lowest non-special IP address
+
+                      3     - MAC address (6 octets)
+                              lowest IEEE MAC address, canonical
+                              order
+
+                      4     - Text, administratively assigned
+                              Maximum remaining length 27
+
+                      5     - Octets, administratively assigned
+                              Maximum remaining length 27
+
+                      6-127 - reserved, unused
+
+                    128-255 - as defined by the enterprise
+                              Maximum remaining length 27
+                "
+    SYNTAX       OCTET STRING (SIZE(5..32))
+
+SnmpSecurityModel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "An identifier that uniquely identifies a
+                 Security Model of the Security Subsystem within
+                 this SNMP Management Architecture.
+
+                 The values for securityModel are allocated as
+                 follows:
+
+                 - The zero value does not identify any particular
+                   security model.
+
+                 - Values between 1 and 255, inclusive, are reserved
+                   for standards-track Security Models and are
+                   managed by the Internet Assigned Numbers Authority
+                   (IANA).
+                 - Values greater than 255 are allocated to
+                   enterprise-specific Security Models.  An
+                   enterprise-specific securityModel value is defined
+                   to be:
+
+                   enterpriseID * 256 + security model within
+                   enterprise
+
+                   For example, the fourth Security Model defined by
+                   the enterprise whose enterpriseID is 1 would be
+                   259.
+
+                 This scheme for allocation of securityModel
+                 values allows for a maximum of 255 standards-
+                 based Security Models, and for a maximum of
+                 256 Security Models per enterprise.
+
+                 It is believed that the assignment of new
+                 securityModel values will be rare in practice
+                 because the larger the number of simultaneously
+                 utilized Security Models, the larger the
+                 chance that interoperability will suffer.
+                 Consequently, it is believed that such a range
+                 will be sufficient.  In the unlikely event that
+                 the standards committee finds this number to be
+                 insufficient over time, an enterprise number
+                 can be allocated to obtain an additional 256
+                 possible values.
+
+                 Note that the most significant bit must be zero;
+                 hence, there are 23 bits allocated for various
+                 organizations to design and define non-standard
+
+                 securityModels.  This limits the ability to
+                 define new proprietary implementations of Security
+                 Models to the first 8,388,608 enterprises.
+
+                 It is worthwhile to note that, in its encoded
+                 form, the securityModel value will normally
+                 require only a single byte since, in practice,
+                 the leftmost bits will be zero for most messages
+                 and sign extension is suppressed by the encoding
+                 rules.
+
+                 As of this writing, there are several values
+                 of securityModel defined for use with SNMP or
+                 reserved for use with supporting MIB objects.
+                 They are as follows:
+
+                     0  reserved for 'any'
+                     1  reserved for SNMPv1
+                     2  reserved for SNMPv2c
+                     3  User-Based Security Model (USM)
+                "
+    SYNTAX       INTEGER(0 .. 2147483647)
+
+SnmpMessageProcessingModel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "An identifier that uniquely identifies a Message
+                 Processing Model of the Message Processing
+                 Subsystem within this SNMP Management Architecture.
+
+                 The values for messageProcessingModel are
+                 allocated as follows:
+
+                 - Values between 0 and 255, inclusive, are
+                   reserved for standards-track Message Processing
+                   Models and are managed by the Internet Assigned
+                   Numbers Authority (IANA).
+
+                 - Values greater than 255 are allocated to
+                   enterprise-specific Message Processing Models.
+                   An enterprise messageProcessingModel value is
+                   defined to be:
+
+                   enterpriseID * 256 +
+                        messageProcessingModel within enterprise
+
+                   For example, the fourth Message Processing Model
+                   defined by the enterprise whose enterpriseID
+
+                   is 1 would be 259.
+
+                 This scheme for allocating messageProcessingModel
+                 values allows for a maximum of 255 standards-
+                 based Message Processing Models, and for a
+                 maximum of 256 Message Processing Models per
+                 enterprise.
+
+                 It is believed that the assignment of new
+                 messageProcessingModel values will be rare
+                 in practice because the larger the number of
+                 simultaneously utilized Message Processing Models,
+                 the larger the chance that interoperability
+                 will suffer. It is believed that such a range
+                 will be sufficient.  In the unlikely event that
+                 the standards committee finds this number to be
+                 insufficient over time, an enterprise number
+                 can be allocated to obtain an additional 256
+                 possible values.
+
+                 Note that the most significant bit must be zero;
+                 hence, there are 23 bits allocated for various
+                 organizations to design and define non-standard
+                 messageProcessingModels.  This limits the ability
+                 to define new proprietary implementations of
+                 Message Processing Models to the first 8,388,608
+                 enterprises.
+
+                 It is worthwhile to note that, in its encoded
+                 form, the messageProcessingModel value will
+                 normally require only a single byte since, in
+                 practice, the leftmost bits will be zero for
+                 most messages and sign extension is suppressed
+                 by the encoding rules.
+
+                 As of this writing, there are several values of
+                 messageProcessingModel defined for use with SNMP.
+                 They are as follows:
+
+                     0  reserved for SNMPv1
+                     1  reserved for SNMPv2c
+                     2  reserved for SNMPv2u and SNMPv2*
+                     3  reserved for SNMPv3
+                "
+    SYNTAX       INTEGER(0 .. 2147483647)
+
+SnmpSecurityLevel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "A Level of Security at which SNMP messages can be
+                 sent or with which operations are being processed;
+                 in particular, one of:
+
+                   noAuthNoPriv - without authentication and
+                                  without privacy,
+                   authNoPriv   - with authentication but
+                                  without privacy,
+                   authPriv     - with authentication and
+                                  with privacy.
+
+                 These three values are ordered such that
+                 noAuthNoPriv is less than authNoPriv and
+                 authNoPriv is less than authPriv.
+                "
+    SYNTAX       INTEGER { noAuthNoPriv(1),
+                           authNoPriv(2),
+                           authPriv(3)
+                         }
+
+SnmpAdminString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS       current
+    DESCRIPTION "An octet string containing administrative
+                 information, preferably in human-readable form.
+
+                 To facilitate internationalization, this
+                 information is represented using the ISO/IEC
+                 IS 10646-1 character set, encoded as an octet
+                 string using the UTF-8 transformation format
+                 described in [RFC2279].
+
+                 Since additional code points are added by
+                 amendments to the 10646 standard from time
+                 to time, implementations must be prepared to
+                 encounter any code point from 0x00000000 to
+                 0x7fffffff.  Byte sequences that do not
+                 correspond to the valid UTF-8 encoding of a
+                 code point or are outside this range are
+                 prohibited.
+
+                 The use of control codes should be avoided.
+
+                 When it is necessary to represent a newline,
+                 the control code sequence CR LF should be used.
+
+                 The use of leading or trailing white space should
+                 be avoided.
+
+                 For code points not directly supported by user
+                 interface hardware or software, an alternative
+                 means of entry and display, such as hexadecimal,
+                 may be provided.
+
+                 For information encoded in 7-bit US-ASCII,
+                 the UTF-8 encoding is identical to the
+                 US-ASCII encoding.
+
+                 UTF-8 may require multiple bytes to represent a
+                 single character / code point; thus the length
+                 of this object in octets may be different from
+                 the number of characters encoded.  Similarly,
+                 size constraints refer to the number of encoded
+                 octets, not the number of characters represented
+                 by an encoding.
+
+                 Note that when this TC is used for an object that
+                 is used or envisioned to be used as an index, then
+                 a SIZE restriction MUST be specified so that the
+                 number of sub-identifiers for any object instance
+                 does not exceed the limit of 128, as defined by
+                 [RFC3416].
+
+                 Note that the size of an SnmpAdminString object is
+                 measured in octets, not characters.
+                "
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+-- Administrative assignments ***************************************
+
+snmpFrameworkAdmin
+    OBJECT IDENTIFIER ::= { snmpFrameworkMIB 1 }
+snmpFrameworkMIBObjects
+    OBJECT IDENTIFIER ::= { snmpFrameworkMIB 2 }
+snmpFrameworkMIBConformance
+    OBJECT IDENTIFIER ::= { snmpFrameworkMIB 3 }
+
+-- the snmpEngine Group ********************************************
+
+snmpEngine OBJECT IDENTIFIER ::= { snmpFrameworkMIBObjects 1 }
+
+snmpEngineID     OBJECT-TYPE
+    SYNTAX       SnmpEngineID
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "An SNMP engine's administratively-unique identifier.
+
+                 This information SHOULD be stored in non-volatile
+                 storage so that it remains constant across
+                 re-initializations of the SNMP engine.
+                "
+    ::= { snmpEngine 1 }
+
+snmpEngineBoots  OBJECT-TYPE
+    SYNTAX       INTEGER (1..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times that the SNMP engine has
+                 (re-)initialized itself since snmpEngineID
+                 was last configured.
+                "
+    ::= { snmpEngine 2 }
+
+snmpEngineTime   OBJECT-TYPE
+    SYNTAX       INTEGER (0..2147483647)
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of seconds since the value of
+                 the snmpEngineBoots object last changed.
+                 When incrementing this object's value would
+                 cause it to exceed its maximum,
+                 snmpEngineBoots is incremented as if a
+                 re-initialization had occurred, and this
+                 object's value consequently reverts to zero.
+                "
+    ::= { snmpEngine 3 }
+
+snmpEngineMaxMessageSize OBJECT-TYPE
+    SYNTAX       INTEGER (484..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The maximum length in octets of an SNMP message
+                 which this SNMP engine can send or receive and
+                 process, determined as the minimum of the maximum
+                 message size values supported among all of the
+                 transports available to and supported by the engine.
+                "
+    ::= { snmpEngine 4 }
+
+-- Registration Points for Authentication and Privacy Protocols **
+
+snmpAuthProtocols OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "Registration point for standards-track
+                  authentication protocols used in SNMP Management
+                  Frameworks.
+                 "
+    ::= { snmpFrameworkAdmin 1 }
+
+snmpPrivProtocols OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "Registration point for standards-track privacy
+                  protocols used in SNMP Management Frameworks.
+                 "
+    ::= { snmpFrameworkAdmin 2 }
+
+-- Conformance information ******************************************
+
+snmpFrameworkMIBCompliances
+               OBJECT IDENTIFIER ::= {snmpFrameworkMIBConformance 1}
+snmpFrameworkMIBGroups
+               OBJECT IDENTIFIER ::= {snmpFrameworkMIBConformance 2}
+
+-- compliance statements
+
+snmpFrameworkMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "The compliance statement for SNMP engines which
+                 implement the SNMP Management Framework MIB.
+                "
+    MODULE    -- this module
+        MANDATORY-GROUPS { snmpEngineGroup }
+    ::= { snmpFrameworkMIBCompliances 1 }
+
+-- units of conformance
+
+snmpEngineGroup OBJECT-GROUP
+    OBJECTS {
+              snmpEngineID,
+              snmpEngineBoots,
+              snmpEngineTime,
+              snmpEngineMaxMessageSize
+            }
+    STATUS       current
+    DESCRIPTION "A collection of objects for identifying and
+                 determining the configuration and current timeliness
+
+                 values of an SNMP engine.
+                "
+    ::= { snmpFrameworkMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-IEEE802-TM-MIB.mib b/snmp_builder/mibs/SNMP-IEEE802-TM-MIB.mib
new file mode 100644
index 0000000..06c25e0
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-IEEE802-TM-MIB.mib
@@ -0,0 +1,40 @@
+SNMP-IEEE802-TM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, snmpModules, snmpDomains
+        FROM SNMPv2-SMI;
+
+    snmpIeee802TmMib MODULE-IDENTITY
+        LAST-UPDATED "200611210000Z"
+        ORGANIZATION "IETF Operations and Management Area"
+        CONTACT-INFO
+            "Juergen Schoenwaelder (Editor)
+             International University Bremen
+             P.O. Box 750 561
+             28725 Bremen, Germany
+
+             Phone: +49 421 200-3587
+             EMail: j.schoenwaelder@iu-bremen.de
+
+             Send comments to <ietfmibs@ops.ietf.org>."
+        DESCRIPTION
+            "This MIB module defines the SNMP over IEEE 802
+             transport mapping.
+
+             Copyright (C) The IETF Trust (2006).  This version
+             of this MIB module is part of RFC 4789; see the RFC
+             itself for full legal notices."
+        REVISION "200611210000Z"
+        DESCRIPTION
+            "The initial version, published as RFC 4789."
+        ::= { snmpModules 21 }
+
+    snmpIeee802Domain OBJECT-IDENTITY
+        STATUS  current
+        DESCRIPTION
+            "The SNMP over IEEE 802 networks transport domain.  The
+             corresponding transport address is of type MacAddress
+             as defined in the SNMPv2-TC module (RFC 2579)."
+        REFERENCE "RFC 2579"
+        ::= { snmpDomains 6 }
+END
diff --git a/snmp_builder/mibs/SNMP-MPD-MIB.mib b/snmp_builder/mibs/SNMP-MPD-MIB.mib
new file mode 100644
index 0000000..d4c605b
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-MPD-MIB.mib
@@ -0,0 +1,145 @@
+SNMP-MPD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-COMPLIANCE, OBJECT-GROUP         FROM SNMPv2-CONF
+    MODULE-IDENTITY, OBJECT-TYPE,
+    snmpModules, Counter32                  FROM SNMPv2-SMI;
+
+snmpMPDMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-EMail:   snmpv3@lists.tislabs.com
+                  Subscribe:  snmpv3-request@lists.tislabs.com
+
+                  Co-Chair:   Russ Mundy
+                              Network Associates Laboratories
+                  postal:     15204 Omega Drive, Suite 300
+                              Rockville, MD 20850-4601
+                              USA
+
+                  EMail:      mundy@tislabs.com
+                  phone:      +1 301-947-7107
+
+                  Co-Chair &
+                  Co-editor:  David Harrington
+                              Enterasys Networks
+                  postal:     35 Industrial Way
+                              P. O. Box 5005
+                              Rochester NH 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  phone:      +1 603-337-2614
+
+                  Co-editor:  Jeffrey Case
+                              SNMP Research, Inc.
+                  postal:     3001 Kimberlin Heights Road
+                              Knoxville, TN 37920-9716
+                              USA
+                  EMail:      case@snmp.com
+                  phone:      +1 423-573-1434
+
+                  Co-editor:  Randy Presuhn
+                              BMC Software, Inc.
+                  postal:     2141 North First Street
+                              San Jose, CA 95131
+                              USA
+                  EMail:      randy_presuhn@bmc.com
+                  phone:      +1 408-546-1006
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+                  EMail:      bwijnen@lucent.com
+                  phone:      +31 348-680-485
+                 "
+    DESCRIPTION  "The MIB for Message Processing and Dispatching
+
+                  Copyright (C) The Internet Society (2002). This
+                  version of this MIB module is part of RFC 3412;
+                  see the RFC itself for full legal notices.
+                 "
+    REVISION     "200210140000Z"            -- 14 October 2002
+    DESCRIPTION  "Updated addresses, published as RFC 3412."
+    REVISION     "199905041636Z"            -- 4 May 1999
+    DESCRIPTION  "Updated addresses, published as RFC 2572."
+
+    REVISION     "199709300000Z"            -- 30 September 1997
+    DESCRIPTION  "Original version, published as RFC 2272."
+    ::= { snmpModules 11 }
+
+-- Administrative assignments ***************************************
+
+snmpMPDAdmin           OBJECT IDENTIFIER ::= { snmpMPDMIB 1 }
+snmpMPDMIBObjects      OBJECT IDENTIFIER ::= { snmpMPDMIB 2 }
+snmpMPDMIBConformance  OBJECT IDENTIFIER ::= { snmpMPDMIB 3 }
+
+-- Statistics for SNMP Messages *************************************
+
+snmpMPDStats           OBJECT IDENTIFIER ::= { snmpMPDMIBObjects 1 }
+
+snmpUnknownSecurityModels OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they referenced a
+                 securityModel that was not known to or supported by
+                 the SNMP engine.
+                "
+    ::= { snmpMPDStats 1 }
+
+snmpInvalidMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because there were invalid
+                 or inconsistent components in the SNMP message.
+                "
+    ::= { snmpMPDStats 2 }
+
+snmpUnknownPDUHandlers OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because the PDU contained
+                 in the packet could not be passed to an application
+                 responsible for handling the pduType, e.g. no SNMP
+                 application had registered for the proper
+                 combination of the contextEngineID and the pduType.
+                "
+    ::= { snmpMPDStats 3 }
+
+-- Conformance information ******************************************
+
+snmpMPDMIBCompliances OBJECT IDENTIFIER ::= {snmpMPDMIBConformance 1}
+snmpMPDMIBGroups      OBJECT IDENTIFIER ::= {snmpMPDMIBConformance 2}
+
+-- Compliance statements
+
+snmpMPDCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "The compliance statement for SNMP entities which
+                 implement the SNMP-MPD-MIB.
+                "
+    MODULE    -- this module
+        MANDATORY-GROUPS { snmpMPDGroup }
+    ::= { snmpMPDMIBCompliances 1 }
+
+snmpMPDGroup OBJECT-GROUP
+    OBJECTS {
+              snmpUnknownSecurityModels,
+              snmpInvalidMsgs,
+              snmpUnknownPDUHandlers
+            }
+    STATUS       current
+    DESCRIPTION "A collection of objects providing for remote
+                 monitoring of the SNMP Message Processing and
+                 Dispatching process.
+                "
+    ::= { snmpMPDMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-NOTIFICATION-MIB.mib b/snmp_builder/mibs/SNMP-NOTIFICATION-MIB.mib
new file mode 100644
index 0000000..0ef06b6
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-NOTIFICATION-MIB.mib
@@ -0,0 +1,589 @@
+SNMP-NOTIFICATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    snmpModules
+        FROM SNMPv2-SMI
+
+    RowStatus,
+    StorageType
+        FROM SNMPv2-TC
+
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+
+    SnmpTagValue,
+    snmpTargetParamsName
+        FROM SNMP-TARGET-MIB
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+snmpNotificationMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+        "WG-email:   snmpv3@lists.tislabs.com
+         Subscribe:  majordomo@lists.tislabs.com
+                     In message body:  subscribe snmpv3
+
+         Co-Chair:   Russ Mundy
+                     Network Associates Laboratories
+         Postal:     15204 Omega Drive, Suite 300
+                     Rockville, MD 20850-4601
+                     USA
+         EMail:      mundy@tislabs.com
+         Phone:      +1 301-947-7107
+
+         Co-Chair:   David Harrington
+                     Enterasys Networks
+         Postal:     35 Industrial Way
+                     P. O. Box 5004
+                     Rochester, New Hampshire 03866-5005
+                     USA
+         EMail:      dbh@enterasys.com
+         Phone:      +1 603-337-2614
+
+         Co-editor:  David B. Levi
+                     Nortel Networks
+         Postal:     3505 Kesterwood Drive
+                     Knoxville, Tennessee 37918
+         EMail:      dlevi@nortelnetworks.com
+         Phone:      +1 865 686 0432
+
+         Co-editor:  Paul Meyer
+                     Secure Computing Corporation
+         Postal:     2675 Long Lake Road
+                     Roseville, Minnesota 55113
+         EMail:      paul_meyer@securecomputing.com
+         Phone:      +1 651 628 1592
+
+         Co-editor:  Bob Stewart
+                     Retired"
+    DESCRIPTION
+        "This MIB module defines MIB objects which provide
+         mechanisms to remotely configure the parameters
+         used by an SNMP entity for the generation of
+         notifications.
+
+         Copyright (C) The Internet Society (2002). This
+         version of this MIB module is part of RFC 3413;
+         see the RFC itself for full legal notices.
+        "
+    REVISION    "200210140000Z"             -- 14 October 2002
+    DESCRIPTION "Clarifications, published as
+                 RFC 3413."
+    REVISION    "199808040000Z"             -- 4 August 1998
+    DESCRIPTION "Clarifications, published as
+                 RFC 2573."
+    REVISION    "199707140000Z"             -- 14 July 1997
+    DESCRIPTION "The initial revision, published as RFC2273."
+    ::= { snmpModules 13 }
+
+snmpNotifyObjects       OBJECT IDENTIFIER ::=
+                                          { snmpNotificationMIB 1 }
+snmpNotifyConformance   OBJECT IDENTIFIER ::=
+                                          { snmpNotificationMIB 3 }
+
+--
+--
+-- The snmpNotifyObjects group
+--
+--
+
+snmpNotifyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpNotifyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table is used to select management targets which should
+         receive notifications, as well as the type of notification
+         which should be sent to each selected management target."
+    ::= { snmpNotifyObjects 1 }
+
+snmpNotifyEntry OBJECT-TYPE
+    SYNTAX      SnmpNotifyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table selects a set of management targets
+         which should receive notifications, as well as the type of
+
+         notification which should be sent to each selected
+         management target.
+
+         Entries in the snmpNotifyTable are created and
+         deleted using the snmpNotifyRowStatus object."
+    INDEX { IMPLIED snmpNotifyName }
+    ::= { snmpNotifyTable 1 }
+
+SnmpNotifyEntry ::= SEQUENCE {
+    snmpNotifyName         SnmpAdminString,
+    snmpNotifyTag          SnmpTagValue,
+    snmpNotifyType         INTEGER,
+    snmpNotifyStorageType  StorageType,
+    snmpNotifyRowStatus    RowStatus
+}
+
+snmpNotifyName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this snmpNotifyEntry."
+    ::= { snmpNotifyEntry 1 }
+
+snmpNotifyTag OBJECT-TYPE
+    SYNTAX      SnmpTagValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains a single tag value which is used
+         to select entries in the snmpTargetAddrTable.  Any entry
+         in the snmpTargetAddrTable which contains a tag value
+         which is equal to the value of an instance of this
+         object is selected.  If this object contains a value
+         of zero length, no entries are selected."
+    DEFVAL { "" }
+    ::= { snmpNotifyEntry 2 }
+
+snmpNotifyType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    trap(1),
+                    inform(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object determines the type of notification to
+
+         be generated for entries in the snmpTargetAddrTable
+         selected by the corresponding instance of
+         snmpNotifyTag.  This value is only used when
+         generating notifications, and is ignored when
+         using the snmpTargetAddrTable for other purposes.
+
+         If the value of this object is trap(1), then any
+         messages generated for selected rows will contain
+         Unconfirmed-Class PDUs.
+
+         If the value of this object is inform(2), then any
+         messages generated for selected rows will contain
+         Confirmed-Class PDUs.
+
+         Note that if an SNMP entity only supports
+         generation of Unconfirmed-Class PDUs (and not
+         Confirmed-Class PDUs), then this object may be
+         read-only."
+    DEFVAL { trap }
+    ::= { snmpNotifyEntry 3 }
+
+snmpNotifyStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpNotifyEntry 4 }
+
+snmpNotifyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5)."
+    ::= { snmpNotifyEntry 5 }
+
+snmpNotifyFilterProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpNotifyFilterProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table is used to associate a notification filter
+         profile with a particular set of target parameters."
+    ::= { snmpNotifyObjects 2 }
+
+snmpNotifyFilterProfileEntry OBJECT-TYPE
+    SYNTAX      SnmpNotifyFilterProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table indicates the name of the filter
+         profile to be used when generating notifications using
+         the corresponding entry in the snmpTargetParamsTable.
+
+         Entries in the snmpNotifyFilterProfileTable are created
+         and deleted using the snmpNotifyFilterProfileRowStatus
+         object."
+    INDEX { IMPLIED snmpTargetParamsName }
+    ::= { snmpNotifyFilterProfileTable 1 }
+
+SnmpNotifyFilterProfileEntry ::= SEQUENCE {
+    snmpNotifyFilterProfileName         SnmpAdminString,
+    snmpNotifyFilterProfileStorType     StorageType,
+    snmpNotifyFilterProfileRowStatus    RowStatus
+}
+
+snmpNotifyFilterProfileName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The name of the filter profile to be used when generating
+         notifications using the corresponding entry in the
+         snmpTargetAddrTable."
+    ::= { snmpNotifyFilterProfileEntry 1 }
+
+snmpNotifyFilterProfileStorType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpNotifyFilterProfileEntry 2 }
+
+snmpNotifyFilterProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5).
+
+         Until instances of all corresponding columns are
+         appropriately configured, the value of the
+         corresponding instance of the
+         snmpNotifyFilterProfileRowStatus column is 'notReady'.
+
+         In particular, a newly created row cannot be made
+         active until the corresponding instance of
+         snmpNotifyFilterProfileName has been set."
+    ::= { snmpNotifyFilterProfileEntry 3 }
+
+snmpNotifyFilterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpNotifyFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of filter profiles.  Filter profiles are used
+         to determine whether particular management targets should
+         receive particular notifications.
+
+         When a notification is generated, it must be compared
+         with the filters associated with each management target
+         which is configured to receive notifications, in order to
+         determine whether it may be sent to each such management
+         target.
+
+         A more complete discussion of notification filtering
+         can be found in section 6. of [SNMP-APPL]."
+    ::= { snmpNotifyObjects 3 }
+
+snmpNotifyFilterEntry OBJECT-TYPE
+    SYNTAX      SnmpNotifyFilterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An element of a filter profile.
+
+         Entries in the snmpNotifyFilterTable are created and
+         deleted using the snmpNotifyFilterRowStatus object."
+    INDEX {         snmpNotifyFilterProfileName,
+            IMPLIED snmpNotifyFilterSubtree }
+    ::= { snmpNotifyFilterTable 1 }
+
+SnmpNotifyFilterEntry ::= SEQUENCE {
+    snmpNotifyFilterSubtree           OBJECT IDENTIFIER,
+    snmpNotifyFilterMask              OCTET STRING,
+    snmpNotifyFilterType              INTEGER,
+    snmpNotifyFilterStorageType       StorageType,
+    snmpNotifyFilterRowStatus         RowStatus
+}
+
+snmpNotifyFilterSubtree OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The MIB subtree which, when combined with the corresponding
+         instance of snmpNotifyFilterMask, defines a family of
+         subtrees which are included in or excluded from the
+         filter profile."
+    ::= { snmpNotifyFilterEntry 1 }
+
+snmpNotifyFilterMask OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..16))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The bit mask which, in combination with the corresponding
+         instance of snmpNotifyFilterSubtree, defines a family of
+         subtrees which are included in or excluded from the
+         filter profile.
+
+         Each bit of this bit mask corresponds to a
+         sub-identifier of snmpNotifyFilterSubtree, with the
+         most significant bit of the i-th octet of this octet
+         string value (extended if necessary, see below)
+         corresponding to the (8*i - 7)-th sub-identifier, and
+         the least significant bit of the i-th octet of this
+         octet string corresponding to the (8*i)-th
+         sub-identifier, where i is in the range 1 through 16.
+
+         Each bit of this bit mask specifies whether or not
+         the corresponding sub-identifiers must match when
+         determining if an OBJECT IDENTIFIER matches this
+         family of filter subtrees; a '1' indicates that an
+         exact match must occur; a '0' indicates 'wild card',
+         i.e., any sub-identifier value matches.
+
+         Thus, the OBJECT IDENTIFIER X of an object instance
+         is contained in a family of filter subtrees if, for
+         each sub-identifier of the value of
+         snmpNotifyFilterSubtree, either:
+
+           the i-th bit of snmpNotifyFilterMask is 0, or
+
+           the i-th sub-identifier of X is equal to the i-th
+           sub-identifier of the value of
+           snmpNotifyFilterSubtree.
+
+         If the value of this bit mask is M bits long and
+         there are more than M sub-identifiers in the
+         corresponding instance of snmpNotifyFilterSubtree,
+         then the bit mask is extended with 1's to be the
+         required length.
+
+         Note that when the value of this object is the
+         zero-length string, this extension rule results in
+         a mask of all-1's being used (i.e., no 'wild card'),
+         and the family of filter subtrees is the one
+         subtree uniquely identified by the corresponding
+         instance of snmpNotifyFilterSubtree."
+    DEFVAL { ''H }
+    ::= { snmpNotifyFilterEntry 2 }
+
+snmpNotifyFilterType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    included(1),
+                    excluded(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates whether the family of filter subtrees
+         defined by this entry are included in or excluded from a
+         filter.  A more detailed discussion of the use of this
+         object can be found in section 6. of [SNMP-APPL]."
+    DEFVAL { included }
+    ::= { snmpNotifyFilterEntry 3 }
+
+snmpNotifyFilterStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpNotifyFilterEntry 4 }
+
+snmpNotifyFilterRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5)."
+    ::= { snmpNotifyFilterEntry 5 }
+
+--
+--
+-- Conformance information
+--
+--
+
+snmpNotifyCompliances OBJECT IDENTIFIER ::=
+                                        { snmpNotifyConformance 1 }
+snmpNotifyGroups      OBJECT IDENTIFIER ::=
+                                        { snmpNotifyConformance 2 }
+
+--
+--
+-- Compliance statements
+--
+--
+
+snmpNotifyBasicCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for minimal SNMP entities which
+         implement only SNMP Unconfirmed-Class notifications and
+         read-create operations on only the snmpTargetAddrTable."
+    MODULE SNMP-TARGET-MIB
+        MANDATORY-GROUPS { snmpTargetBasicGroup }
+
+        OBJECT snmpTargetParamsMPModel
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required."
+
+        OBJECT snmpTargetParamsSecurityModel
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required."
+
+        OBJECT snmpTargetParamsSecurityName
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required."
+
+        OBJECT snmpTargetParamsSecurityLevel
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required."
+
+        OBJECT snmpTargetParamsStorageType
+        SYNTAX INTEGER {
+            readOnly(5)
+        }
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required.
+             Support of the values other(1), volatile(2),
+             nonVolatile(3), and permanent(4) is not required."
+
+        OBJECT snmpTargetParamsRowStatus
+        SYNTAX INTEGER {
+            active(1)
+        }
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access to the
+             snmpTargetParamsTable is not required.
+             Support of the values notInService(2), notReady(3),
+             createAndGo(4), createAndWait(5), and destroy(6) is
+             not required."
+
+    MODULE -- This Module
+        MANDATORY-GROUPS { snmpNotifyGroup }
+
+        OBJECT snmpNotifyTag
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required."
+
+        OBJECT snmpNotifyType
+        SYNTAX INTEGER {
+            trap(1)
+        }
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required.
+             Support of the value notify(2) is not required."
+
+        OBJECT snmpNotifyStorageType
+        SYNTAX INTEGER {
+            readOnly(5)
+        }
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access is not required.
+             Support of the values other(1), volatile(2),
+             nonVolatile(3), and permanent(4) is not required."
+
+        OBJECT snmpNotifyRowStatus
+        SYNTAX INTEGER {
+            active(1)
+        }
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Create/delete/modify access to the
+             snmpNotifyTable is not required.
+             Support of the values notInService(2), notReady(3),
+             createAndGo(4), createAndWait(5), and destroy(6) is
+             not required."
+    ::= { snmpNotifyCompliances 1 }
+
+snmpNotifyBasicFiltersCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which implement
+         SNMP Unconfirmed-Class notifications with filtering, and
+         read-create operations on all related tables."
+    MODULE SNMP-TARGET-MIB
+        MANDATORY-GROUPS { snmpTargetBasicGroup }
+    MODULE -- This Module
+        MANDATORY-GROUPS { snmpNotifyGroup,
+                           snmpNotifyFilterGroup }
+    ::= { snmpNotifyCompliances 2 }
+
+snmpNotifyFullCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which either
+         implement only SNMP Confirmed-Class notifications, or both
+         SNMP Unconfirmed-Class and Confirmed-Class notifications,
+         plus filtering and read-create operations on all related
+         tables."
+    MODULE SNMP-TARGET-MIB
+        MANDATORY-GROUPS { snmpTargetBasicGroup,
+                           snmpTargetResponseGroup }
+    MODULE -- This Module
+        MANDATORY-GROUPS { snmpNotifyGroup,
+                           snmpNotifyFilterGroup }
+    ::= { snmpNotifyCompliances 3 }
+
+snmpNotifyGroup OBJECT-GROUP
+    OBJECTS {
+        snmpNotifyTag,
+        snmpNotifyType,
+        snmpNotifyStorageType,
+        snmpNotifyRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects for selecting which management
+         targets are used for generating notifications, and the
+         type of notification to be generated for each selected
+         management target."
+    ::= { snmpNotifyGroups 1 }
+
+snmpNotifyFilterGroup OBJECT-GROUP
+    OBJECTS {
+        snmpNotifyFilterProfileName,
+        snmpNotifyFilterProfileStorType,
+        snmpNotifyFilterProfileRowStatus,
+        snmpNotifyFilterMask,
+        snmpNotifyFilterType,
+        snmpNotifyFilterStorageType,
+        snmpNotifyFilterRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing remote configuration
+         of notification filters."
+    ::= { snmpNotifyGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-PROXY-MIB.mib b/snmp_builder/mibs/SNMP-PROXY-MIB.mib
new file mode 100644
index 0000000..4a72e86
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-PROXY-MIB.mib
@@ -0,0 +1,294 @@
+SNMP-PROXY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    snmpModules
+        FROM SNMPv2-SMI
+
+    RowStatus,
+    StorageType
+        FROM SNMPv2-TC
+
+    SnmpEngineID,
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+
+    SnmpTagValue
+        FROM SNMP-TARGET-MIB
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+snmpProxyMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+        "WG-email:   snmpv3@lists.tislabs.com
+         Subscribe:  majordomo@lists.tislabs.com
+                     In message body:  subscribe snmpv3
+
+         Co-Chair:   Russ Mundy
+                     Network Associates Laboratories
+         Postal:     15204 Omega Drive, Suite 300
+                     Rockville, MD 20850-4601
+                     USA
+         EMail:      mundy@tislabs.com
+         Phone:      +1 301-947-7107
+
+         Co-Chair:   David Harrington
+                     Enterasys Networks
+         Postal:     35 Industrial Way
+                     P. O. Box 5004
+                     Rochester, New Hampshire 03866-5005
+                     USA
+         EMail:      dbh@enterasys.com
+         Phone:      +1 603-337-2614
+
+         Co-editor:  David B. Levi
+                     Nortel Networks
+         Postal:     3505 Kesterwood Drive
+                     Knoxville, Tennessee 37918
+         EMail:      dlevi@nortelnetworks.com
+         Phone:      +1 865 686 0432
+
+         Co-editor:  Paul Meyer
+                     Secure Computing Corporation
+         Postal:     2675 Long Lake Road
+                     Roseville, Minnesota 55113
+         EMail:      paul_meyer@securecomputing.com
+         Phone:      +1 651 628 1592
+
+         Co-editor:  Bob Stewart
+                     Retired"
+    DESCRIPTION
+        "This MIB module defines MIB objects which provide
+         mechanisms to remotely configure the parameters
+         used by a proxy forwarding application.
+
+         Copyright (C) The Internet Society (2002). This
+         version of this MIB module is part of RFC 3413;
+         see the RFC itself for full legal notices.
+        "
+    REVISION    "200210140000Z"             -- 14 October 2002
+    DESCRIPTION "Clarifications, published as
+                 RFC 3413."
+    REVISION    "199808040000Z"             -- 4 August 1998
+    DESCRIPTION "Clarifications, published as
+                 RFC 2573."
+    REVISION    "199707140000Z"             -- 14 July 1997
+    DESCRIPTION "The initial revision, published as RFC2273."
+    ::= { snmpModules 14 }
+
+snmpProxyObjects        OBJECT IDENTIFIER ::= { snmpProxyMIB 1 }
+snmpProxyConformance    OBJECT IDENTIFIER ::= { snmpProxyMIB 3 }
+
+--
+
+--
+-- The snmpProxyObjects group
+--
+--
+
+snmpProxyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpProxyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of translation parameters used by proxy forwarder
+         applications for forwarding SNMP messages."
+    ::= { snmpProxyObjects 2 }
+
+snmpProxyEntry OBJECT-TYPE
+    SYNTAX      SnmpProxyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of translation parameters used by a proxy forwarder
+         application for forwarding SNMP messages.
+
+         Entries in the snmpProxyTable are created and deleted
+         using the snmpProxyRowStatus object."
+    INDEX { IMPLIED snmpProxyName }
+    ::= { snmpProxyTable 1 }
+
+SnmpProxyEntry ::= SEQUENCE {
+    snmpProxyName               SnmpAdminString,
+    snmpProxyType               INTEGER,
+    snmpProxyContextEngineID    SnmpEngineID,
+    snmpProxyContextName        SnmpAdminString,
+    snmpProxyTargetParamsIn     SnmpAdminString,
+    snmpProxySingleTargetOut    SnmpAdminString,
+    snmpProxyMultipleTargetOut  SnmpTagValue,
+    snmpProxyStorageType        StorageType,
+    snmpProxyRowStatus          RowStatus
+}
+
+snmpProxyName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this snmpProxyEntry."
+    ::= { snmpProxyEntry 1 }
+
+snmpProxyType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    read(1),
+                    write(2),
+                    trap(3),
+                    inform(4)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of message that may be forwarded using
+         the translation parameters defined by this entry."
+    ::= { snmpProxyEntry 2 }
+
+snmpProxyContextEngineID OBJECT-TYPE
+    SYNTAX      SnmpEngineID
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The contextEngineID contained in messages that
+         may be forwarded using the translation parameters
+         defined by this entry."
+    ::= { snmpProxyEntry 3 }
+
+snmpProxyContextName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The contextName contained in messages that may be
+         forwarded using the translation parameters defined
+         by this entry.
+
+         This object is optional, and if not supported, the
+         contextName contained in a message is ignored when
+         selecting an entry in the snmpProxyTable."
+    ::= { snmpProxyEntry 4 }
+
+snmpProxyTargetParamsIn OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object selects an entry in the snmpTargetParamsTable.
+         The selected entry is used to determine which row of the
+         snmpProxyTable to use for forwarding received messages."
+    ::= { snmpProxyEntry 5 }
+
+snmpProxySingleTargetOut OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object selects a management target defined in the
+         snmpTargetAddrTable (in the SNMP-TARGET-MIB).  The
+         selected target is defined by an entry in the
+         snmpTargetAddrTable whose index value (snmpTargetAddrName)
+         is equal to this object.
+
+         This object is only used when selection of a single
+         target is required (i.e. when forwarding an incoming
+         read or write request)."
+    ::= { snmpProxyEntry 6 }
+
+snmpProxyMultipleTargetOut OBJECT-TYPE
+    SYNTAX      SnmpTagValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object selects a set of management targets defined
+         in the snmpTargetAddrTable (in the SNMP-TARGET-MIB).
+
+         This object is only used when selection of multiple
+         targets is required (i.e. when forwarding an incoming
+         notification)."
+    ::= { snmpProxyEntry 7 }
+
+snmpProxyStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpProxyEntry 8 }
+
+snmpProxyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+
+         set this object to either createAndGo(4) or
+         createAndWait(5).
+
+         The following objects may not be modified while the
+         value of this object is active(1):
+             - snmpProxyType
+             - snmpProxyContextEngineID
+             - snmpProxyContextName
+             - snmpProxyTargetParamsIn
+             - snmpProxySingleTargetOut
+             - snmpProxyMultipleTargetOut"
+    ::= { snmpProxyEntry 9 }
+
+--
+--
+-- Conformance information
+--
+--
+
+snmpProxyCompliances OBJECT IDENTIFIER ::=
+                                         { snmpProxyConformance 1 }
+snmpProxyGroups      OBJECT IDENTIFIER ::=
+                                         { snmpProxyConformance 2 }
+
+--
+--
+-- Compliance statements
+--
+--
+
+snmpProxyCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which include
+         a proxy forwarding application."
+    MODULE SNMP-TARGET-MIB
+        MANDATORY-GROUPS { snmpTargetBasicGroup,
+                           snmpTargetResponseGroup }
+    MODULE -- This Module
+        MANDATORY-GROUPS { snmpProxyGroup }
+    ::= { snmpProxyCompliances 1 }
+
+snmpProxyGroup OBJECT-GROUP
+    OBJECTS {
+        snmpProxyType,
+        snmpProxyContextEngineID,
+        snmpProxyContextName,
+        snmpProxyTargetParamsIn,
+        snmpProxySingleTargetOut,
+        snmpProxyMultipleTargetOut,
+        snmpProxyStorageType,
+        snmpProxyRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing remote configuration of
+         management target translation parameters for use by
+         proxy forwarder applications."
+    ::= { snmpProxyGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-REPEATER-MIB.mib b/snmp_builder/mibs/SNMP-REPEATER-MIB.mib
new file mode 100644
index 0000000..c89fb41
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-REPEATER-MIB.mib
@@ -0,0 +1,3265 @@
+SNMP-REPEATER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Counter32, Counter64, Integer32, Gauge32, TimeTicks,
+    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, mib-2
+        FROM SNMPv2-SMI
+    TimeStamp, DisplayString, MacAddress, TEXTUAL-CONVENTION,
+    RowStatus, TestAndIncr
+        FROM SNMPv2-TC
+    OBJECT-GROUP, MODULE-COMPLIANCE
+        FROM SNMPv2-CONF
+    OwnerString
+        FROM IF-MIB;
+
+snmpRptrMod MODULE-IDENTITY
+    LAST-UPDATED    "9609140000Z"
+    ORGANIZATION    "IETF HUB MIB Working Group"
+    CONTACT-INFO
+        "WG E-mail: hubmib@hprnd.rose.hp.com
+
+             Chair: Dan Romascanu
+            Postal: Madge Networks (Israel) Ltd.
+                    Atidim Technology Park, Bldg. 3
+                    Tel Aviv 61131, Israel
+               Tel: 972-3-6458414, 6458458
+               Fax: 972-3-6487146
+            E-mail: dromasca@madge.com
+
+            Editor: Kathryn de Graaf
+            Postal: 3Com Corporation
+                    118 Turnpike Rd.
+                    Southborough, MA 01772 USA
+               Tel: (508)229-1627
+               Fax: (508)490-5882
+            E-mail: kdegraaf@isd.3com.com"
+    DESCRIPTION
+        "Management information for 802.3 repeaters.
+
+        The following references are used throughout
+        this MIB module:
+
+        [IEEE 802.3 Std]
+            refers to IEEE 802.3/ISO 8802-3 Information
+            processing systems - Local area networks -
+            Part 3: Carrier sense multiple access with
+
+            collision detection (CSMA/CD) access method
+            and physical layer specifications (1993).
+
+        [IEEE 802.3 Mgt]
+            refers to IEEE 802.3u-1995, '10 Mb/s &
+            100 Mb/s Management, Section 30,'
+            Supplement to ANSI/IEEE 802.3.
+
+        The following terms are used throughout this
+        MIB module.  For complete formal definitions,
+        the IEEE 802.3 standards should be consulted
+        wherever possible:
+
+        System - A managed entity compliant with this
+        MIB, and incorporating at least one managed
+        802.3 repeater.
+
+        Chassis - An enclosure for one managed repeater,
+        part of a managed repeater, or several managed
+        repeaters.  It typically contains an integral
+        power supply and a variable number of available
+        module slots.
+
+        Repeater-unit - The portion of the repeater set
+        that is inboard of the physical media interfaces.
+        The physical media interfaces (MAUs, AUIs) may be
+        physically separated from the repeater-unit, or
+        they may be integrated into the same physical
+        package.
+
+        Trivial repeater-unit - An isolated port that can
+        gather statistics.
+
+        Group - A recommended, but optional, entity
+        defined by the IEEE 802.3 management standard,
+        in order to support a modular numbering scheme.
+        The classical example allows an implementor to
+        represent field-replaceable units as groups of
+        ports, with the port numbering matching the
+        modular hardware implementation.
+
+        System interconnect segment - An internal
+        segment allowing interconnection of ports
+        belonging to different physical entities
+        into the same logical manageable repeater.
+        Examples of implementation might be
+        backplane busses in modular hubs, or
+        chaining cables in stacks of hubs.
+
+        Stack - A scalable system that may include
+        managed repeaters, in which modularity is
+        achieved by interconnecting a number of
+        different chassis.
+
+        Module - A building block in a modular
+        chassis.  It typically maps into one 'slot';
+        however, the range of configurations may be
+        very large, with several modules entering
+        one slot, or one module covering several
+        slots.
+        "
+    REVISION "9309010000Z"
+    DESCRIPTION
+        "Published as RFC 1516"
+    REVISION "9210010000Z"
+    DESCRIPTION
+        "Published as RFC 1368"
+    ::= { snmpDot3RptrMgt 5 }
+
+snmpDot3RptrMgt OBJECT IDENTIFIER ::= { mib-2 22 }
+
+OptMacAddr ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "1x:"
+    STATUS          current
+    DESCRIPTION
+        "Either a 6 octet address in the `canonical'
+        order defined by IEEE 802.1a, i.e., as if it
+        were transmitted least significant bit first
+        if a value is available or a zero length string."
+    REFERENCE
+        "See MacAddress in SNMPv2-TC. The only difference
+        is that a zero length string is allowed as a value
+        for OptMacAddr and not for MacAddress."
+    SYNTAX OCTET STRING (SIZE (0 | 6))
+
+-- Basic information at the repeater, group, and port level.
+
+rptrBasicPackage
+    OBJECT IDENTIFIER ::= { snmpDot3RptrMgt 1 }
+  rptrRptrInfo
+        OBJECT IDENTIFIER ::= { rptrBasicPackage 1 }
+  rptrGroupInfo
+
+        OBJECT IDENTIFIER ::= { rptrBasicPackage 2 }
+  rptrPortInfo
+        OBJECT IDENTIFIER ::= { rptrBasicPackage 3 }
+  rptrAllRptrInfo
+        OBJECT IDENTIFIER ::= { rptrBasicPackage 4 }
+
+-- Monitoring information at the repeater, group, and port level.
+rptrMonitorPackage
+    OBJECT IDENTIFIER ::= { snmpDot3RptrMgt 2 }
+  rptrMonitorRptrInfo
+        OBJECT IDENTIFIER ::= { rptrMonitorPackage 1 }
+  rptrMonitorGroupInfo
+        OBJECT IDENTIFIER ::= { rptrMonitorPackage 2 }
+  rptrMonitorPortInfo
+        OBJECT IDENTIFIER ::= { rptrMonitorPackage 3 }
+  rptrMonitorAllRptrInfo
+        OBJECT IDENTIFIER ::= { rptrMonitorPackage 4 }
+
+-- Address tracking information at the repeater, group,
+-- and port level.
+rptrAddrTrackPackage
+    OBJECT IDENTIFIER ::= { snmpDot3RptrMgt 3 }
+  rptrAddrTrackRptrInfo
+        OBJECT IDENTIFIER ::= { rptrAddrTrackPackage 1 }
+  rptrAddrTrackGroupInfo
+        -- this subtree is currently unused
+        OBJECT IDENTIFIER ::= { rptrAddrTrackPackage 2 }
+  rptrAddrTrackPortInfo
+        OBJECT IDENTIFIER ::= { rptrAddrTrackPackage 3 }
+
+-- TopN information.
+rptrTopNPackage
+        OBJECT IDENTIFIER ::= { snmpDot3RptrMgt 4 }
+  rptrTopNRptrInfo
+        -- this subtree is currently unused
+        OBJECT IDENTIFIER ::= { rptrTopNPackage 1 }
+  rptrTopNGroupInfo
+        -- this subtree is currently unused
+        OBJECT IDENTIFIER ::= { rptrTopNPackage 2 }
+  rptrTopNPortInfo
+        OBJECT IDENTIFIER ::= { rptrTopNPackage 3 }
+
+-- Old version of basic information at the repeater level.
+--
+-- In a system containing a single managed repeater,
+-- configuration, status, and control objects for the overall
+-- repeater.
+
+--
+-- The objects contained under the rptrRptrInfo subtree are
+-- intended for backwards compatibility with implementations of
+-- RFC 1516 [11].  In newer implementations (both single- and
+-- multiple-repeater implementations) the rptrInfoTable should
+-- be implemented.  It is the preferred source of this information,
+-- as it contains the values for all repeaters managed by the
+-- agent.  In all cases, the objects in the rptrRptrInfo subtree
+-- are duplicates of the corresponding objects in the first entry
+-- of the rptrInfoTable.
+
+rptrGroupCapacity OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            The rptrGroupCapacity is the number of groups
+            that can be contained within the repeater.  Within
+            each managed repeater, the groups are uniquely
+            numbered in the range from 1 to rptrGroupCapacity.
+
+            Some groups may not be present in the repeater, in
+            which case the actual number of groups present
+            will be less than rptrGroupCapacity.  The number
+            of groups present will never be greater than
+            rptrGroupCapacity.
+
+            Note:  In practice, this will generally be the
+            number of field-replaceable units (i.e., modules,
+            cards, or boards) that can fit in the physical
+            repeater enclosure, and the group numbers will
+            correspond to numbers marked on the physical
+            enclosure."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.3,
+            aRepeaterGroupCapacity."
+    ::= { rptrRptrInfo 1 }
+
+rptrOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  other(1),            -- undefined or unknown
+                  ok(2),               -- no known failures
+                  rptrFailure(3),      -- repeater-related failure
+                  groupFailure(4),     -- group-related failure
+                  portFailure(5),      -- port-related failure
+                  generalFailure(6)    -- failure, unspecified type
+
+                }
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            The rptrOperStatus object indicates the
+            operational state of the repeater.  The
+            rptrHealthText object may be consulted for more
+            specific information about the state of the
+            repeater's health.
+
+            In the case of multiple kinds of failures (e.g.,
+            repeater failure and port failure), the value of
+            this attribute shall reflect the highest priority
+            failure in the following order, listed highest
+            priority first:
+
+                rptrFailure(3)
+                groupFailure(4)
+                portFailure(5)
+                generalFailure(6)."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.5, aRepeaterHealthState."
+    ::= { rptrRptrInfo 2 }
+
+rptrHealthText OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            The health text object is a text string that
+            provides information relevant to the operational
+            state of the repeater.  Agents may use this string
+            to provide detailed information on current
+            failures, including how they were detected, and/or
+            instructions for problem resolution.  The contents
+            are agent-specific."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.6, aRepeaterHealthText."
+    ::= { rptrRptrInfo 3 }
+
+rptrReset OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  noReset(1),
+                  reset(2)
+
+                }
+    MAX-ACCESS  read-write
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            Setting this object to reset(2) causes a
+            transition to the START state of Fig 9-2 in
+            section 9 [IEEE 802.3 Std] for a 10Mb/s repeater,
+            and the START state of Fig 27-2 in section 27
+            of that standard for a 100Mb/s repeater.
+
+            Setting this object to noReset(1) has no effect.
+            The agent will always return the value noReset(1)
+            when this object is read.
+
+            After receiving a request to set this variable to
+            reset(2), the agent is allowed to delay the reset
+            for a short period.  For example, the implementor
+            may choose to delay the reset long enough to allow
+            the SNMP response to be transmitted.  In any
+            event, the SNMP response must be transmitted.
+
+            This action does not reset the management counters
+            defined in this document nor does it affect the
+            portAdminStatus parameters.  Included in this
+            action is the execution of a disruptive Self-Test
+            with the following characteristics:  a) The nature
+            of the tests is not specified.  b) The test resets
+            the repeater but without affecting management
+            information about the repeater.  c) The test does
+            not inject packets onto any segment.  d) Packets
+            received during the test may or may not be
+            transferred.  e) The test does not interfere with
+            management functions.
+
+            After performing this self-test, the agent will
+            update the repeater health information (including
+            rptrOperStatus and rptrHealthText), and send a
+            rptrHealth trap."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.2.1, acResetRepeater."
+    ::= { rptrRptrInfo 4 }
+
+rptrNonDisruptTest OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  noSelfTest(1),
+                  selfTest(2)
+
+                }
+    MAX-ACCESS  read-write
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            Setting this object to selfTest(2) causes the
+            repeater to perform a agent-specific, non-
+            disruptive self-test that has the following
+            characteristics:  a) The nature of the tests is
+            not specified.  b) The test does not change the
+            state of the repeater or management information
+            about the repeater.  c) The test does not inject
+            packets onto any segment.  d) The test does not
+            prevent the relay of any packets.  e) The test
+            does not interfere with management functions.
+
+            After performing this test, the agent will update
+            the repeater health information (including
+            rptrOperStatus and rptrHealthText) and send a
+            rptrHealth trap.
+
+            Note that this definition allows returning an
+            'okay' result after doing a trivial test.
+
+            Setting this object to noSelfTest(1) has no
+            effect.  The agent will always return the value
+            noSelfTest(1) when this object is read."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.2.2,
+            acExecuteNonDisruptiveSelfTest."
+    ::= { rptrRptrInfo 5 }
+
+rptrTotalPartitionedPorts OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            This object returns the total number of ports in
+            the repeater whose current state meets all three
+            of the following criteria:  rptrPortOperStatus
+            does not have the value notPresent(3),
+            rptrPortAdminStatus is enabled(1), and
+            rptrPortAutoPartitionState is autoPartitioned(2)."
+    ::= { rptrRptrInfo 6 }
+
+-- Basic information at the group level.
+--
+-- Configuration and status objects for each
+-- managed group in the system, independent
+-- of whether there is one or more managed
+-- repeater-units in the system.
+
+rptrGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of descriptive and status information about
+            the groups of ports."
+    ::= { rptrGroupInfo 1 }
+
+rptrGroupEntry OBJECT-TYPE
+    SYNTAX      RptrGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing information
+            about a single group of ports."
+    INDEX    { rptrGroupIndex }
+    ::= { rptrGroupTable 1 }
+
+RptrGroupEntry ::=
+    SEQUENCE {
+        rptrGroupIndex
+            Integer32,
+        rptrGroupDescr
+            DisplayString,
+        rptrGroupObjectID
+            OBJECT IDENTIFIER,
+        rptrGroupOperStatus
+            INTEGER,
+        rptrGroupLastOperStatusChange
+            TimeTicks,
+        rptrGroupPortCapacity
+            Integer32
+    }
+
+rptrGroupIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the group within the
+
+            system for which this entry contains
+            information."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.2.1.1, aGroupID."
+    ::= { rptrGroupEntry 1 }
+
+rptrGroupDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            A textual description of the group.  This value
+            should include the full name and version
+            identification of the group's hardware type and
+            indicate how the group is differentiated from
+            other types of groups in the repeater.  Plug-in
+            Module, Rev A' or 'Barney Rubble 10BASE-T 4-port
+            SIMM socket Version 2.1' are examples of valid
+            group descriptions.
+
+            It is mandatory that this only contain printable
+            ASCII characters."
+    ::= { rptrGroupEntry 2 }
+
+rptrGroupObjectID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor's authoritative identification of the
+            group.  This value may be allocated within the SMI
+            enterprises subtree (1.3.6.1.4.1) and provides a
+            straight-forward and unambiguous means for
+            determining what kind of group is being managed.
+
+            For example, this object could take the value
+            1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
+            Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
+            and had assigned the identifier
+            1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone
+            6-Port FOIRL Plug-in Module.'"
+    ::= { rptrGroupEntry 3 }
+
+rptrGroupOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  other(1),
+                  operational(2),
+                  malfunctioning(3),
+                  notPresent(4),
+                  underTest(5),
+                  resetInProgress(6)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An object that indicates the operational status
+            of the group.
+
+            A status of notPresent(4) indicates that the group
+            is temporarily or permanently physically and/or
+            logically not a part of the repeater.  It is an
+            implementation-specific matter as to whether the
+            agent effectively removes notPresent entries from
+            the table.
+
+            A status of operational(2) indicates that the
+            group is functioning, and a status of
+            malfunctioning(3) indicates that the group is
+            malfunctioning in some way."
+    ::= { rptrGroupEntry 4 }
+
+rptrGroupLastOperStatusChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            An object that contains the value of sysUpTime at
+            the time when the last of the following occurred:
+              1) the agent cold- or warm-started;
+              2) the row for the group was created (such
+                 as when the group was added to the system); or
+              3) the value of rptrGroupOperStatus for the
+                 group changed.
+
+            A value of zero indicates that the group's
+            operational status has not changed since the agent
+            last restarted."
+    ::= { rptrGroupEntry 5 }
+
+rptrGroupPortCapacity OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The rptrGroupPortCapacity is the number of ports
+            that can be contained within the group.  Valid
+            range is 1-2147483647.  Within each group, the
+            ports are uniquely numbered in the range from 1 to
+            rptrGroupPortCapacity.
+
+            Some ports may not be present in the system, in
+            which case the actual number of ports present
+            will be less than the value of rptrGroupPortCapacity.
+            The number of ports present in the group will never
+            be greater than the value of rptrGroupPortCapacity.
+
+            Note:  In practice, this will generally be the
+            number of ports on a module, card, or board, and
+            the port numbers will correspond to numbers marked
+            on the physical embodiment."
+    REFERENCE
+            "IEEE 802.3 Mgt, 30.4.2.1.2, aGroupPortCapacity."
+    ::= { rptrGroupEntry 6 }
+
+-- Basic information at the port level.
+--
+-- Configuration and status objects for
+-- each managed repeater port in the system,
+-- independent of whether there is one or more
+-- managed repeater-units in the system.
+
+rptrPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of descriptive and status information about
+            the repeater ports in the system.  The number of
+            entries is independent of the number of repeaters
+            in the managed system."
+    ::= { rptrPortInfo 1 }
+
+rptrPortEntry OBJECT-TYPE
+    SYNTAX      RptrPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing information
+            about a single port."
+    INDEX    { rptrPortGroupIndex, rptrPortIndex }
+    ::= { rptrPortTable 1 }
+
+RptrPortEntry ::=
+    SEQUENCE {
+        rptrPortGroupIndex
+            Integer32,
+        rptrPortIndex
+            Integer32,
+        rptrPortAdminStatus
+            INTEGER,
+        rptrPortAutoPartitionState
+            INTEGER,
+        rptrPortOperStatus
+            INTEGER,
+        rptrPortRptrId
+            Integer32
+    }
+
+rptrPortGroupIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the group containing the
+            port for which this entry contains information."
+    ::= { rptrPortEntry 1 }
+
+rptrPortIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the port within the group
+            for which this entry contains information.  This
+            identifies the port independently from the repeater
+            it may be attached to.  The numbering scheme for
+            ports is implementation specific; however, this
+            value can never be greater than
+            rptrGroupPortCapacity for the associated group."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID."
+    ::= { rptrPortEntry 2 }
+
+rptrPortAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  enabled(1),
+                  disabled(2)
+
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Setting this object to disabled(2) disables the
+            port.  A disabled port neither transmits nor
+            receives.  Once disabled, a port must be
+            explicitly enabled to restore operation.  A port
+            which is disabled when power is lost or when a
+            reset is exerted shall remain disabled when normal
+            operation resumes.
+
+            The admin status takes precedence over auto-
+            partition and functionally operates between the
+            auto-partition mechanism and the AUI/PMA.
+
+            Setting this object to enabled(1) enables the port
+            and exerts a BEGIN on the port's auto-partition
+            state machine.
+
+            (In effect, when a port is disabled, the value of
+            rptrPortAutoPartitionState for that port is frozen
+            until the port is next enabled.  When the port
+            becomes enabled, the rptrPortAutoPartitionState
+            becomes notAutoPartitioned(1), regardless of its
+            pre-disabling state.)"
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.2, aPortAdminState
+            and 30.4.3.2.1, acPortAdminControl."
+    ::= { rptrPortEntry 3 }
+
+rptrPortAutoPartitionState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  notAutoPartitioned(1),
+                  autoPartitioned(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The autoPartitionState flag indicates whether the
+            port is currently partitioned by the repeater's
+            auto-partition protection.
+
+            The conditions that cause port partitioning are
+            specified in partition state machine in Sections
+            9 and 27 of [IEEE 802.3 Std].  They are not
+            differentiated here."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.3, aAutoPartitionState."
+    ::= { rptrPortEntry 4 }
+
+rptrPortOperStatus  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  operational(1),
+                  notOperational(2),
+                  notPresent(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object indicates the port's operational
+            status.  The notPresent(3) status indicates the
+            port is physically removed (note this may or may
+            not be possible depending on the type of port.)
+            The operational(1) status indicates that the port
+            is enabled (see rptrPortAdminStatus) and working,
+            even though it might be auto-partitioned (see
+            rptrPortAutoPartitionState).
+
+            If this object has the value operational(1) and
+            rptrPortAdminStatus is set to disabled(2), it is
+            expected that this object's value will soon change
+            to notOperational(2)."
+    ::= { rptrPortEntry 5 }
+
+rptrPortRptrId OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the repeater to
+            which this port belongs.  The repeater
+            identified by a particular value of this object
+            is the same as that identified by the same
+            value of rptrInfoId.  A value of zero
+            indicates that this port currently is not
+            a member of any repeater."
+    ::= { rptrPortEntry 6 }
+
+-- New version of basic information at the repeater level.
+--
+-- Configuration, status, and control objects for
+-- each managed repeater in the system.
+
+rptrInfoTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table of information about each
+            non-trivial repeater. The number of entries
+            depends on the physical configuration of the
+            managed system."
+    ::= { rptrAllRptrInfo 1 }
+
+rptrInfoEntry OBJECT-TYPE
+    SYNTAX      RptrInfoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing information
+            about a single non-trivial repeater."
+    INDEX    { rptrInfoId }
+    ::= { rptrInfoTable 1 }
+
+RptrInfoEntry ::=
+    SEQUENCE {
+        rptrInfoId
+            Integer32,
+        rptrInfoRptrType
+            INTEGER,
+        rptrInfoOperStatus
+            INTEGER,
+        rptrInfoReset
+            INTEGER,
+        rptrInfoPartitionedPorts
+            Gauge32,
+        rptrInfoLastChange
+            TimeStamp
+    }
+
+rptrInfoId OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the repeater for which
+            this entry contains information."
+    ::= { rptrInfoEntry 1 }
+
+rptrInfoRptrType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  other(1),                -- undefined or unknown
+
+                  tenMb(2),
+                  onehundredMbClassI(3),
+                  onehundredMbClassII(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The rptrInfoRptrType returns a value that identifies
+            the CSMA/CD repeater type."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.2, aRepeaterType."
+    ::= { rptrInfoEntry 2 }
+
+rptrInfoOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  other(1),
+                  ok(2),
+                  failure(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The rptrInfoOperStatus object indicates the
+            operational state of the repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.5, aRepeaterHealthState."
+    ::= { rptrInfoEntry 3 }
+
+rptrInfoReset OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  noReset(1),
+                  reset(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Setting this object to reset(2) causes a
+            transition to the START state of Fig 9-2 in
+            section 9 [IEEE 802.3 Std] for a 10Mb/s repeater,
+            and to the START state of Fig 27-2 in section 27
+            of that standard for a 100Mb/s repeater.
+
+            Setting this object to noReset(1) has no effect.
+            The agent will always return the value noReset(1)
+            when this object is read.
+
+            After receiving a request to set this variable to
+            reset(2), the agent is allowed to delay the reset
+
+            for a short period.  For example, the implementor
+            may choose to delay the reset long enough to allow
+            the SNMP response to be transmitted.  In any
+            event, the SNMP response must be transmitted.
+
+            This action does not reset the management counters
+            defined in this document nor does it affect the
+            portAdminStatus parameters.  Included in this
+            action is the execution of a disruptive Self-Test
+            with the following characteristics:  a) The nature
+            of the tests is not specified.  b) The test resets
+            the repeater but without affecting management
+            information about the repeater.  c) The test does
+            not inject packets onto any segment.  d) Packets
+            received during the test may or may not be
+            transferred.  e) The test does not interfere with
+            management functions.
+
+            After performing this self-test, the agent will
+            update the repeater health information (including
+            rptrInfoOperStatus), and send a rptrInfoResetEvent
+            notification."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.2.1, acResetRepeater."
+    ::= { rptrInfoEntry 4 }
+
+rptrInfoPartitionedPorts OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object returns the total number of ports in
+            the repeater whose current state meets all three
+            of the following criteria:  rptrPortOperStatus
+            does not have the value notPresent(3),
+            rptrPortAdminStatus is enabled(1), and
+            rptrPortAutoPartitionState is autoPartitioned(2)."
+    ::= { rptrInfoEntry 5 }
+
+rptrInfoLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime when any of the following
+            conditions occurred:
+              1) agent cold- or warm-started;
+              2) this instance of repeater was created
+
+                 (such as when a device or module was
+                 added to the system);
+              3) a change in the value of rptrInfoOperStatus;
+              4) ports were added or removed as members of
+                 the repeater; or
+              5) any of the counters associated with this
+                 repeater had a discontinuity."
+    ::= { rptrInfoEntry 6 }
+
+--
+-- Old version of statistics at the repeater level.
+--
+-- Performance monitoring statistics for the repeater
+--
+-- In a system containing a single managed repeater-unit,
+-- the statistics object for the repeater-unit.
+
+-- The objects contained under the rptrMonitorRptrInfo subtree are
+-- intended for backwards compatibility with implementations of
+-- RFC 1516 [11].  In newer implementations (both single- and
+-- multiple-repeater implementations), the rptrMonitorTable will
+-- be implemented.  It is the preferred source of this information,
+-- as it contains the values for all repeaters managed by the
+-- agent.  In all cases, the objects in the rptrMonitorRptrInfo
+-- subtree are duplicates of the corresponding objects in the
+-- first entry of the rptrMonitorTable.
+
+rptrMonitorTransmitCollisions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            For a clause 9 (10Mb/s) repeater, this counter
+            is incremented every time the repeater state
+            machine enters the TRANSMIT COLLISION state
+            from any state other than ONE PORT LEFT
+            (Ref: Fig 9-2 [IEEE 802.3 Std]).
+
+            For a clause 27 repeater, this counter is
+            incremented every time the repeater core state
+            diagram enters the Jam state as a result of
+            Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]).
+
+            The approximate minimum time for rollover of this
+            counter is 16 hours in a 10Mb/s repeater and 1.6
+            hours in a 100Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.8, aTransmitCollisions."
+    ::= { rptrMonitorRptrInfo 1 }
+
+-- Statistics at the group level.
+--
+-- In a system containing a single managed repeater-unit,
+-- the statistics objects for each group.
+
+rptrMonitorGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrMonitorGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            Table of performance and error statistics for the
+            groups within the repeater.  The number of entries
+            is the same as that in the rptrGroupTable."
+    ::= { rptrMonitorGroupInfo 1 }
+
+rptrMonitorGroupEntry OBJECT-TYPE
+    SYNTAX    RptrMonitorGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS    deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            An entry in the table, containing total
+            performance and error statistics for a single
+            group.  Regular retrieval of the information in
+            this table provides a means of tracking the
+            performance and health of the networked devices
+            attached to this group's ports.
+
+            The counters in this table are redundant in the
+            sense that they are the summations of information
+            already available through other objects.  However,
+            these sums provide a considerable optimization of
+            network management traffic over the otherwise
+            necessary retrieval of the individual counters
+            included in each sum.
+
+            Note:  Group-level counters are
+
+            deprecated in this MIB.  It is recommended
+            that management applications instead use
+            the repeater-level counters contained in
+            the rptrMonTable."
+    INDEX    { rptrMonitorGroupIndex }
+    ::= { rptrMonitorGroupTable 1 }
+
+RptrMonitorGroupEntry ::=
+    SEQUENCE {
+        rptrMonitorGroupIndex
+            Integer32,
+        rptrMonitorGroupTotalFrames
+            Counter32,
+        rptrMonitorGroupTotalOctets
+            Counter32,
+        rptrMonitorGroupTotalErrors
+            Counter32
+    }
+
+rptrMonitorGroupIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            This object identifies the group within the
+            repeater for which this entry contains
+            information."
+    ::= { rptrMonitorGroupEntry 1 }
+
+rptrMonitorGroupTotalFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            The total number of frames of valid frame length
+            that have been received on the ports in this group
+            and for which the FCSError and CollisionEvent
+            signals were not asserted.  This counter is the
+            summation of the values of the
+            rptrMonitorPortReadableFrames counters for all of
+            the ports in the group.
+
+            This statistic provides one of the parameters
+            necessary for obtaining the packet error rate.
+
+            The approximate minimum time for rollover of this
+            counter is 80 hours in a 10Mb/s repeater."
+    ::= { rptrMonitorGroupEntry 2 }
+
+rptrMonitorGroupTotalOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            The total number of octets contained in the valid
+            frames that have been received on the ports in
+            this group.  This counter is the summation of the
+            values of the rptrMonitorPortReadableOctets
+            counters for all of the ports in the group.
+
+            This statistic provides an indicator of the total
+            data transferred.  The approximate minimum time
+            for rollover of this counter is 58 minutes in a
+            10Mb/s repeater."
+    ::= { rptrMonitorGroupEntry 3 }
+
+rptrMonitorGroupTotalErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            The total number of errors which have occurred on
+            all of the ports in this group.  This counter is
+            the summation of the values of the
+            rptrMonitorPortTotalErrors counters for all of the
+            ports in the group."
+    ::= { rptrMonitorGroupEntry 4 }
+
+-- Statistics at the port level.
+--
+
+rptrMonitorPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrMonitorPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of performance and error statistics for the
+            ports.  The number of entries is the same as that
+
+            in the rptrPortTable.
+
+            The columnar object rptrMonitorPortLastChange
+            is used to indicate possible discontinuities
+            of counter type columnar objects in the table."
+    ::= { rptrMonitorPortInfo 1 }
+
+rptrMonitorPortEntry OBJECT-TYPE
+    SYNTAX      RptrMonitorPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing performance and
+            error statistics for a single port."
+    INDEX    { rptrMonitorPortGroupIndex, rptrMonitorPortIndex }
+    ::= { rptrMonitorPortTable 1 }
+
+RptrMonitorPortEntry ::=
+    SEQUENCE {
+        rptrMonitorPortGroupIndex
+            Integer32,
+        rptrMonitorPortIndex
+            Integer32,
+        rptrMonitorPortReadableFrames
+            Counter32,
+        rptrMonitorPortReadableOctets
+            Counter32,
+        rptrMonitorPortFCSErrors
+            Counter32,
+        rptrMonitorPortAlignmentErrors
+            Counter32,
+        rptrMonitorPortFrameTooLongs
+            Counter32,
+        rptrMonitorPortShortEvents
+            Counter32,
+        rptrMonitorPortRunts
+            Counter32,
+        rptrMonitorPortCollisions
+            Counter32,
+        rptrMonitorPortLateEvents
+            Counter32,
+        rptrMonitorPortVeryLongEvents
+            Counter32,
+        rptrMonitorPortDataRateMismatches
+            Counter32,
+        rptrMonitorPortAutoPartitions
+            Counter32,
+        rptrMonitorPortTotalErrors
+
+            Counter32,
+        rptrMonitorPortLastChange
+            TimeStamp
+    }
+
+rptrMonitorPortGroupIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the group containing the
+            port for which this entry contains information."
+    ::= { rptrMonitorPortEntry 1 }
+
+rptrMonitorPortIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the port within the group
+            for which this entry contains information."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID."
+    ::= { rptrMonitorPortEntry 2 }
+
+rptrMonitorPortReadableFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object is the number of frames of valid
+            frame length that have been received on this port.
+            This counter is incremented by one for each frame
+            received on this port whose OctetCount is greater
+            than or equal to minFrameSize and less than or
+            equal to maxFrameSize (Ref: IEEE 802.3 Std,
+            4.4.2.1) and for which the FCSError and
+            CollisionEvent signals are not asserted.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            This statistic provides one of the parameters
+            necessary for obtaining the packet error rate.
+            The approximate minimum time for rollover of this
+            counter is 80 hours at 10Mb/s."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.4, aReadableFrames."
+    ::= { rptrMonitorPortEntry 3 }
+
+rptrMonitorPortReadableOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object is the number of octets contained in
+            valid frames that have been received on this port.
+            This counter is incremented by OctetCount for each
+            frame received on this port which has been
+            determined to be a readable frame (i.e., including
+            FCS octets but excluding framing bits and dribble
+            bits).
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            This statistic provides an indicator of the total
+            data transferred.  The approximate minimum time
+            for rollover of this counter in a 10Mb/s repeater
+            is 58 minutes.
+
+            For ports receiving traffic at a maximum rate in
+            a 100Mb/s repeater, this counter can roll over
+            in less than 6 minutes.  Since that amount of time
+            could be less than a management station's poll cycle
+            time, in order to avoid a loss of information a
+            management station is advised to also poll the
+            rptrMonitorPortUpper32Octets object, or to use the
+            64-bit counter defined by
+            rptrMonitorPortHCReadableOctets instead of the
+            two 32-bit counters."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.5, aReadableOctets."
+    ::= { rptrMonitorPortEntry 4 }
+
+rptrMonitorPortFCSErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each frame
+            received on this port with the FCSError signal
+            asserted and the FramingError and CollisionEvent
+            signals deasserted and whose OctetCount is greater
+
+            than or equal to minFrameSize and less than or
+            equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3
+            Std).
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 80 hours at 10Mb/s."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.6,
+            aFrameCheckSequenceErrors."
+    ::= { rptrMonitorPortEntry 5 }
+
+rptrMonitorPortAlignmentErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each frame
+            received on this port with the FCSError and
+            FramingError signals asserted and CollisionEvent
+            signal deasserted and whose OctetCount is greater
+            than or equal to minFrameSize and less than or
+            equal to maxFrameSize (Ref: IEEE 802.3 Std,
+            4.4.2.1).  If rptrMonitorPortAlignmentErrors is
+            incremented then the rptrMonitorPortFCSErrors
+            Counter shall not be incremented for the same
+            frame.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 80 hours at 10Mb/s."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.7, aAlignmentErrors."
+    ::= { rptrMonitorPortEntry 6 }
+
+rptrMonitorPortFrameTooLongs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each frame
+            received on this port whose OctetCount is greater
+
+            than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std).
+            If rptrMonitorPortFrameTooLongs is incremented
+            then neither the rptrMonitorPortAlignmentErrors
+            nor the rptrMonitorPortFCSErrors counter shall be
+            incremented for the frame.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 61 days in a 10Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.8, aFramesTooLong."
+    ::= { rptrMonitorPortEntry 7 }
+
+rptrMonitorPortShortEvents OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each
+            CarrierEvent on this port with ActivityDuration
+            less than ShortEventMaxTime.  ShortEventMaxTime is
+            greater than 74 bit times and less than 82 bit
+            times.  ShortEventMaxTime has tolerances included
+            to provide for circuit losses between a
+            conformance test point at the AUI and the
+            measurement point within the state machine.
+
+            Notes:
+
+            ShortEvents may indicate externally
+            generated noise hits which will cause the repeater
+            to transmit Runts to its other ports, or propagate
+            a collision (which may be late) back to the
+            transmitting DTE and damaged frames to the rest of
+            the network.
+
+            Implementors may wish to consider selecting the
+            ShortEventMaxTime towards the lower end of the
+            allowed tolerance range to accommodate bit losses
+            suffered through physical channel devices not
+            budgeted for within this standard.
+
+            The significance of this attribute is different
+            in 10 and 100 Mb/s collision domains.  Clause 9
+            repeaters perform fragment extension of short
+
+            events which would be counted as runts on the
+            interconnect ports of other repeaters.  Clause
+            27 repeaters do not perform fragment extension.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 16 hours in a 10Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.9, aShortEvents."
+    ::= { rptrMonitorPortEntry 8 }
+
+rptrMonitorPortRunts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each
+            CarrierEvent on this port that meets one of the
+            following two conditions.  Only one test need be
+            made.  a) The ActivityDuration is greater than
+            ShortEventMaxTime and less than ValidPacketMinTime
+            and the CollisionEvent signal is deasserted.  b)
+            The OctetCount is less than 64, the
+            ActivityDuration is greater than ShortEventMaxTime
+            and the CollisionEvent signal is deasserted.
+            ValidPacketMinTime is greater than or equal to 552
+            bit times and less than 565 bit times.
+
+            An event whose length is greater than 74 bit times
+            but less than 82 bit times shall increment either
+            the shortEvents counter or the runts counter but
+            not both.  A CarrierEvent greater than or equal to
+            552 bit times but less than 565 bit times may or
+            may not be counted as a runt.
+
+            ValidPacketMinTime has tolerances included to
+            provide for circuit losses between a conformance
+            test point at the AUI and the measurement point
+            within the state machine.
+
+            Runts usually indicate collision fragments, a
+            normal network event.  In certain situations
+            associated with large diameter networks a
+            percentage of collision fragments may exceed
+            ValidPacketMinTime.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 16 hours in a 10Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.10, aRunts."
+    ::= { rptrMonitorPortEntry 9 }
+
+rptrMonitorPortCollisions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For a clause 9 repeater, this counter is
+            incremented by one for any CarrierEvent signal
+            on any port for which the CollisionEvent signal
+            on this port is asserted.  For a clause 27
+            repeater port the counter increments on entering
+            the Collision Count Increment state of the
+            partition state diagram (fig 27-8 of
+            [IEEE 802.3 Std]).
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 16 hours in a 10Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.11, aCollisions."
+    ::= { rptrMonitorPortEntry 10 }
+
+rptrMonitorPortLateEvents OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For a clause 9 repeater port, this counter is
+            incremented by one for each CarrierEvent
+            on this port in which the CollIn(X)
+            variable transitions to the value SQE (Ref:
+            9.6.6.2, IEEE 802.3 Std) while the
+            ActivityDuration is greater than the
+            LateEventThreshold.  For a clause 27 repeater
+            port, this counter is incremented by one on
+            entering the Collision Count Increment state
+
+            of the  partition state diagram (fig 27-8)
+            while the  ActivityDuration is greater than
+            the LateEvent- Threshold.  Such a CarrierEvent
+            is counted twice, as both a collision and as a
+            lateEvent.
+
+            The LateEventThreshold is greater than 480 bit
+            times and less than 565 bit times.
+            LateEventThreshold has tolerances included to
+            permit an implementation to build a single
+            threshold to serve as both the LateEventThreshold
+            and ValidPacketMinTime threshold.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 81 hours in a 10Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.12, aLateEvents."
+    ::= { rptrMonitorPortEntry 11 }
+
+rptrMonitorPortVeryLongEvents OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For a clause 9 repeater port, this counter
+            is incremented by one for each CarrierEvent
+            whose ActivityDuration is greater than the
+            MAU Jabber Lockup Protection timer TW3
+            (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std).
+
+            For a clause 27 repeater port, this counter
+            is incremented by one on entry to the
+            Rx Jabber state of the receiver timer state
+            diagram (fig 27-7).  Other counters may
+            be incremented as appropriate.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.13, aVeryLongEvents."
+    ::= { rptrMonitorPortEntry 12 }
+
+rptrMonitorPortDataRateMismatches OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each
+            frame received by this port that meets all
+            of the conditions required by only one of the
+            following two measurement methods:
+
+            Measurement method A:  1) The CollisionEvent
+            signal is not asserted (10Mb/s operation) or
+            the Collision Count Increment state of the
+            partition state diagram (fig 27-8 of
+            [IEEE 802.3 Std]) has not been entered
+            (100Mb/s operation).  2) The ActivityDuration
+            is greater than ValidPacketMinTime.  3) The
+            frequency (data rate) is detectably mismatched
+            from the local transmit frequency.
+
+            Measurement method B:  1) The CollisionEvent
+            signal is not asserted (10Mb/s operation)
+            or the Collision Count Increment state of the
+            partition state diagram (fig 27-8 of
+            [IEEE 802.3 Std]) has not been entered
+            (100Mb/s operation).  2) The OctetCount is
+            greater than 63.  3) The frequency (data
+            rate) is detectably mismatched from the local
+            transmit frequency.  The exact degree of
+            mismatch is vendor specific and is to be
+            defined by the vendor for conformance testing.
+
+            When this event occurs, other counters whose
+            increment conditions were satisfied may or may not
+            also be incremented, at the implementor's
+            discretion.  Whether or not the repeater was able
+            to maintain data integrity is beyond the scope of
+            this standard.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.14, aDataRateMismatches."
+    ::= { rptrMonitorPortEntry 13 }
+
+rptrMonitorPortAutoPartitions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for
+            each time the repeater has automatically
+            partitioned this port.
+
+            The conditions that cause a clause 9
+            repeater port to partition are specified in
+            the partition state diagram in clause 9 of
+            [IEEE 802.3 Std].  They are not differentiated
+            here.  A clause 27 repeater port partitions
+            on entry to the Partition Wait state of the
+            partition state diagram (fig 27-8 in
+            [IEEE 802.3 Std]).
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.15, aAutoPartitions."
+    ::= { rptrMonitorPortEntry 14 }
+
+rptrMonitorPortTotalErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of errors which have occurred on
+            this port.  This counter is the summation of the
+            values of other error counters (for the same
+            port), namely:
+
+                rptrMonitorPortFCSErrors,
+                rptrMonitorPortAlignmentErrors,
+                rptrMonitorPortFrameTooLongs,
+                rptrMonitorPortShortEvents,
+                rptrMonitorPortLateEvents,
+                rptrMonitorPortVeryLongEvents,
+                rptrMonitorPortDataRateMismatches, and
+                rptrMonitorPortSymbolErrors.
+
+            This counter is redundant in the sense that it is
+            the summation of information already available
+            through other objects.  However, it is included
+            specifically because the regular retrieval of this
+            object as a means of tracking the health of a port
+            provides a considerable optimization of network
+            management traffic over the otherwise necessary
+
+            retrieval of the summed counters.
+
+            Note that rptrMonitorPortRunts is not included
+            in this total; this is because runts usually
+            indicate collision fragments, a normal network
+            event.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    ::= { rptrMonitorPortEntry 15 }
+
+rptrMonitorPortLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime when the last of
+            the following occurred:
+              1) the agent cold- or warm-started;
+              2) the row for the port was created
+                 (such as when a device or module was added
+                  to the system); or
+              3) any condition that would cause one of
+                 the counters for the row to experience
+                 a discontinuity."
+    ::= { rptrMonitorPortEntry 16 }
+
+rptrMonitor100PortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrMonitor100PortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of additional performance and error
+            statistics for 100Mb/s ports, above and
+            beyond those parameters that apply to both
+            10 and 100Mbps ports.  Entries exist only for
+            ports attached to 100Mbps repeaters.
+
+            The columnar object rptrMonitorPortLastChange
+            is used to indicate possible discontinuities
+            of counter type columnar objects in this table."
+    ::= { rptrMonitorPortInfo 2 }
+
+rptrMonitor100PortEntry OBJECT-TYPE
+    SYNTAX      RptrMonitor100PortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing performance
+            and error statistics for a single 100Mb/s port."
+    INDEX    { rptrMonitorPortGroupIndex, rptrMonitorPortIndex }
+    ::= { rptrMonitor100PortTable 1 }
+
+RptrMonitor100PortEntry ::=
+    SEQUENCE {
+        rptrMonitorPortIsolates
+            Counter32,
+        rptrMonitorPortSymbolErrors
+            Counter32,
+        rptrMonitorPortUpper32Octets
+            Counter32,
+        rptrMonitorPortHCReadableOctets
+            Counter64
+    }
+
+rptrMonitorPortIsolates OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one each time that
+            the repeater port automatically isolates as a
+            consequence of false carrier events.  The conditions
+            which cause a port to automatically isolate are
+            defined by the transition from the False Carrier
+            state to the Link Unstable state of the carrier
+            integrity state diagram (figure 27-9)
+            [IEEE 802.3 Standard].
+
+            Note:  Isolates do not affect the value of
+            the PortOperStatus object.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.16, aIsolates."
+    ::= { rptrMonitor100PortEntry 1 }
+
+rptrMonitorPortSymbolErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one each time when
+
+            valid length packet was received at the port and
+            there was at least one occurrence of an invalid
+            data symbol. This can increment only once per valid
+            carrier event. A collision presence at any port of
+            the repeater containing port N, will not cause this
+            attribute to increment.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 7.4 hours at 100Mb/s."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.17,
+            aSymbolErrorDuringPacket."
+    ::= { rptrMonitor100PortEntry 2 }
+
+rptrMonitorPortUpper32Octets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object is the number of octets contained in
+            valid frames that have been received on this port,
+            modulo 2**32.  That is, it contains the upper 32
+            bits of a 64-bit octets counter, of which the
+            lower 32 bits are contained in the
+            rptrMonitorPortReadableOctets object.
+
+            This two-counter mechanism is provided for those
+            network management protocols that do not support
+            64-bit counters (e.g. SNMP V1) and are used to
+            manage a repeater type of 100Mb/s.
+
+            Conformance clauses for this MIB are defined such
+            that implementation of this object is not required
+            in a system which does not support 100Mb/s.
+            However, systems with mixed 10 and 100Mb/s ports
+            may implement this object across all ports,
+            including 10Mb/s.  If this object is implemented,
+            it must be according to the definition in the first
+            paragraph of this description; that is, the value
+            of this object MUST be a valid count.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    ::= { rptrMonitor100PortEntry 3 }
+
+rptrMonitorPortHCReadableOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object is the number of octets contained in
+            valid frames that have been received on this port.
+            This counter is incremented by OctetCount for each
+            frame received on this port which has been
+            determined to be a readable frame (i.e., including
+            FCS octets but excluding framing bits and dribble
+            bits).
+
+            This statistic provides an indicator of the total
+            data transferred.
+
+            This counter is a 64-bit version of rptrMonitor-
+            PortReadableOctets. It should be used by network
+            management protocols which suppport 64-bit counters
+            (e.g. SNMPv2).
+
+            Conformance clauses for this MIB are defined such
+            that implementation of this object is not required
+            in a system which does not support 100Mb/s.
+            However, systems with mixed 10 and 100Mb/s ports
+            may implement this object across all ports,
+            including 10Mb/s.  If this object is implemented,
+            it must be according to the definition in the first
+            paragraph of this description; that is, the value
+            of this object MUST be a valid count.
+
+            A discontinuity may occur in the value
+            when the value of object
+            rptrMonitorPortLastChange changes."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.5, aReadableOctets."
+    ::= { rptrMonitor100PortEntry 4 }
+
+-- New version of statistics at the repeater level.
+--
+-- Statistics objects for each managed repeater
+-- in the system.
+
+rptrMonTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrMonEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table of information about each
+            non-trivial repeater.  The number of entries
+            in this table is the same as the number of
+            entries in the rptrInfoTable.
+
+            The columnar object rptrInfoLastChange is
+            used to indicate possible discontinuities of
+            counter type columnar objects in this table."
+    ::= { rptrMonitorAllRptrInfo 1 }
+
+rptrMonEntry OBJECT-TYPE
+    SYNTAX      RptrMonEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing information
+            about a single non-trivial repeater."
+    INDEX    { rptrInfoId }
+    ::= { rptrMonTable 1 }
+
+RptrMonEntry ::=
+    SEQUENCE {
+        rptrMonTxCollisions
+            Counter32,
+        rptrMonTotalFrames
+            Counter32,
+        rptrMonTotalErrors
+            Counter32,
+        rptrMonTotalOctets
+            Counter32
+    }
+
+rptrMonTxCollisions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For a clause 9 (10Mb/s) repeater, this counter
+            is incremented every time the repeater state
+            machine enters the TRANSMIT COLLISION state
+            from any state other than ONE PORT LEFT
+            (Ref: Fig 9-2 [IEEE 802.3 Std]).
+
+            For a clause 27 repeater, this counter is
+            incremented every time the repeater core state
+
+            diagram enters the Jam state as a result of
+            Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]).
+
+            The approximate minimum time for rollover of this
+            counter is 16 hours in a 10Mb/s repeater and 1.6
+            hours in a 100Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.1.8, aTransmitCollisions"
+    ::= { rptrMonEntry 1 }
+
+rptrMonTotalFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of frames of valid frame length
+            that have been received on the ports in this repeater
+            and for which the FCSError and CollisionEvent
+            signals were not asserted.  If an implementation
+            can not obtain a count of frames as seen by
+            the repeater itself, this counter may be
+            implemented as the summation of the values of the
+            rptrMonitorPortReadableFrames counters for all of
+            the ports in the repeater.
+
+            This statistic provides one of the parameters
+            necessary for obtaining the packet error rate.
+            The approximate minimum time for rollover of this
+            counter is 80 hours in a 10Mb/s repeater."
+    ::= { rptrMonEntry 3 }
+
+rptrMonTotalErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of errors which have occurred on
+            all of the ports in this repeater.  The errors
+            included in this count are the same as those listed
+            for the rptrMonitorPortTotalErrors counter.  If an
+            implementation can not obtain a count of these
+            errors as seen by the repeater itself, this counter
+            may be implemented as the summation of the values of
+            the rptrMonitorPortTotalErrors counters for all of
+            the ports in the repeater."
+    ::= { rptrMonEntry 4 }
+
+rptrMonTotalOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets contained in the valid
+            frames that have been received on the ports in
+            this group.  If an implementation can not obtain
+            a count of octets as seen by the repeater itself,
+            this counter may be the summation of the
+            values of the rptrMonitorPortReadableOctets
+            counters for all of the ports in the group.
+
+            This statistic provides an indicator of the total
+            data transferred.  The approximate minimum time
+            for rollover of this counter in a 10Mb/s repeater
+            is 58 minutes divided by the number of ports in
+            the repeater.
+
+            For 100Mb/s repeaters processing traffic at a
+            maximum rate, this counter can roll over in less
+            than 6 minutes divided by the number of ports in
+            the repeater.  Since that amount of time could
+            be less than a management station's poll cycle
+            time, in order to avoid a loss of information a
+            management station is advised to also poll the
+            rptrMonUpper32TotalOctets object, or to use the
+            64-bit counter defined by rptrMonHCTotalOctets
+            instead of the two 32-bit counters."
+    ::= { rptrMonEntry 5 }
+
+rptrMon100Table OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrMon100Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table of additional information about each
+            100Mb/s repeater, augmenting the entries in
+            the rptrMonTable.  Entries exist in this table
+            only for 100Mb/s repeaters.
+
+            The columnar object rptrInfoLastChange is
+            used to indicate possible discontinuities of
+            counter type columnar objects in this table."
+    ::= { rptrMonitorAllRptrInfo 2 }
+
+rptrMon100Entry OBJECT-TYPE
+    SYNTAX      RptrMon100Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing information
+            about a single 100Mbps repeater."
+    INDEX    { rptrInfoId }
+    ::= { rptrMon100Table 1 }
+
+RptrMon100Entry ::=
+    SEQUENCE {
+        rptrMonUpper32TotalOctets
+            Counter32,
+        rptrMonHCTotalOctets
+            Counter64
+    }
+
+rptrMonUpper32TotalOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets contained in the valid
+            frames that have been received on the ports in
+            this repeater, modulo 2**32.  That is, it contains
+            the upper 32 bits of a 64-bit counter, of which
+            the lower 32 bits are contained in the
+            rptrMonTotalOctets object.  If an implementation
+            can not obtain a count of octets as seen
+            by the repeater itself, the 64-bit value
+            may be the summation of the values of the
+            rptrMonitorPortReadableOctets counters combined
+            with the corresponding rptrMonitorPortUpper32Octets
+            counters for all of the ports in the repeater.
+
+            This statistic provides an indicator of the total
+            data transferred within the repeater.
+
+            This two-counter mechanism is provided for those
+            network management protocols that do not support
+            64-bit counters (e.g. SNMP V1) and are used to
+            manage a repeater type of 100Mb/s.
+
+            Conformance clauses for this MIB are defined such
+            that implementation of this object is not required
+            in a system which does not support 100Mb/s.
+            However, systems with mixed 10 and 100Mb/s ports
+            may implement this object across all ports,
+            including 10Mb/s.  If this object is implemented,
+            it must be according to the definition in the first
+
+            paragraph of this description; that is, the value
+            of this object MUST be a valid count."
+    ::= { rptrMon100Entry 1 }
+
+rptrMonHCTotalOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets contained in the valid
+            frames that have been received on the ports in
+            this group.  If a implementation can not obtain
+            a count of octets as seen by the repeater itself,
+            this counter may be the summation of the
+            values of the rptrMonitorPortReadableOctets
+            counters for all of the ports in the group.
+
+            This statistic provides an indicator of the total
+            data transferred.
+
+            This counter is a 64-bit (high-capacity) version
+            of rptrMonUpper32TotalOctets and rptrMonTotalOctets.
+            It should be used by network management protocols
+            which support 64-bit counters (e.g. SNMPv2).
+
+            Conformance clauses for this MIB are defined such
+            that implementation of this object is not required
+            in a system which does not support 100Mb/s.
+            However, systems with mixed 10 and 100Mb/s ports
+            may implement this object across all ports,
+            including 10Mb/s.  If this object is implemented,
+            it must be according to the definition in the first
+            paragraph of this description; that is, the value
+            of this object MUST be a valid count."
+    ::= { rptrMon100Entry 2 }
+
+--
+-- The Repeater Address Search Table
+--
+-- This table provides an active address tracking
+-- capability which can be also used to collect the
+-- necessary information for mapping the topology
+-- of a network.  Note that an NMS is required to have
+-- read-write access to the table in order to access
+-- this function.  Section 4, "Topology Mapping",
+-- contains a description of an algorithm which can
+-- make use of this table, in combination with the
+
+-- forwarding databases of managed bridges/switches
+-- in the network, to map network topology.
+--
+
+rptrAddrSearchTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF RptrAddrSearchEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "This table contains one entry per repeater in the
+            system.  It defines objects which allow a network
+            management application to instruct an agent to watch
+            for a given MAC address and report which port it
+            was seen on.  Only one address search can be in
+            progress on each repeater at any one time.  Before
+            starting an address search, a management application
+            should obtain 'ownership' of the entry in
+            rptrAddrSearchTable for the repeater that is to
+            perform the search.  This is accomplished with the
+            rptrAddrSearchLock and rptrAddrSearchStatus as
+            follows:
+
+            try_again:
+                get(rptrAddrSearchLock, rptrAddrSearchStatus)
+                while (rptrAddrSearchStatus != notInUse)
+                {
+                    /* Loop waiting for objects to be available*/
+                    short delay
+                    get(rptrAddrSearchLock, rptrAddrSearchStatus)
+                }
+
+                /* Try to claim map objects */
+                lock_value = rptrAddrSearchLock
+                if ( set(rptrAddrSearchLock = lock_value,
+                         rptrAddrSearchStatus = inUse,
+                         rptrAddrSearchOwner = 'my-IP-address)
+                      == FAILURE)
+                    /* Another manager got the lock */
+                    goto try_again
+
+                /* I have the lock */
+                set (rptrAddrSearchAddress = <search target>)
+
+                wait for rptrAddrSearchState to change from none
+
+                if (rptrAddrSearchState == single)
+                    get (rptrAddrSearchGroup, rptrAddrSearchPort)
+
+                /* release the lock, making sure not to overwrite
+                   anyone else's lock */
+                set (rptrAddrSearchLock = lock_value+1,
+                     rptrAddrSearchStatus = notInUse,
+                     rptrAddrSearchOwner = '')
+
+            A management station first retrieves the values of
+            the appropriate instances of the rptrAddrSearchLock
+            and rptrAddrSearchStatus objects, periodically
+            repeating the retrieval if necessary, until the value
+            of rptrAddrSearchStatus is 'notInUse'.  The
+            management station then tries to set the same
+            instance of the rptrAddrSearchLock object to the
+            value it just retrieved, the same instance of the
+            rptrAddrSearchStatus object to 'inUse', and the
+            corresponding instance of rptrAddrSearchOwner to a
+            value indicating itself.  If the set operation
+            succeeds, then the management station has obtained
+            ownership of the rptrAddrSearchEntry, and the value
+            of rptrAddrSearchLock is incremented by the agent (as
+            per the semantics of TestAndIncr).  Failure of the
+            set operation indicates that some other manager has
+            obtained ownership of the rptrAddrSearchEntry.
+
+            Once ownership is obtained, the management station
+            can proceed with the search operation.  Note that the
+            agent will reset rptrAddrSearchStatus to 'notInUse'
+            if it has been in the 'inUse' state for an abnormally
+            long period of time, to prevent a misbehaving manager
+            from permanently locking the entry.  It is suggested
+            that this timeout period be between one and five
+            minutes.
+
+            When the management station has completed its search
+            operation, it should free the entry by setting
+            the instance of the rptrAddrSearchLock object to the
+            previous value + 1, the instance of the
+            rptrAddrSearchStatus to 'notInUse', and the instance
+            of rptrAddrSearchOwner to a zero length string.  This
+            is done to prevent overwriting another station's
+            lock."
+    ::= { rptrAddrTrackRptrInfo 1 }
+
+rptrAddrSearchEntry OBJECT-TYPE
+    SYNTAX     RptrAddrSearchEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing objects for invoking an address
+            search on a repeater."
+    INDEX      { rptrInfoId }
+    ::= { rptrAddrSearchTable 1 }
+
+RptrAddrSearchEntry ::=
+    SEQUENCE {
+        rptrAddrSearchLock     TestAndIncr,
+        rptrAddrSearchStatus   INTEGER,
+        rptrAddrSearchAddress  MacAddress,
+        rptrAddrSearchState    INTEGER,
+        rptrAddrSearchGroup    Integer32,
+        rptrAddrSearchPort     Integer32,
+        rptrAddrSearchOwner    OwnerString
+    }
+
+rptrAddrSearchLock OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "This object is used by a management station as an
+            advisory lock for this rptrAddrSearchEntry."
+    ::= { rptrAddrSearchEntry 1 }
+
+rptrAddrSearchStatus  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   notInUse(1),
+                   inUse(2)
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "This object is used to indicate that some management
+            station is currently using this rptrAddrSearchEntry.
+            Cooperating managers should set this object to
+            'notInUse' when they are finished using this entry.
+            The agent will automatically set the value of this
+            object to 'notInUse' if it has been set to 'inUse'
+            for an unusually long period of time."
+    ::= { rptrAddrSearchEntry 2 }
+
+rptrAddrSearchAddress OBJECT-TYPE
+    SYNTAX     MacAddress
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "This object is used to search for a specified MAC
+            address.  When this object is set, an address search
+            begins.  This automatically sets the corresponding
+            instance of the rptrAddrSearchState object  to 'none'
+            and the corresponding instances of the
+            rptrAddrSearchGroup and rptrAddrSearchPort objects to
+            0.
+
+            When a valid frame is received by this repeater with
+            a source MAC address which matches the current value
+            of rptrAddrSearchAddress, the agent will update the
+            corresponding instances of rptrAddrSearchState,
+            rptrAddrSearchGroup and rptrAddrSearchPort to reflect
+            the current status of the search, and the group and
+            port on which the frame was seen."
+    ::= { rptrAddrSearchEntry 3 }
+
+rptrAddrSearchState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    none(1),
+                    single(2),
+                    multiple(3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The current state of the MAC address search on this
+            repeater.  This object is initialized to 'none' when
+            the corresponding instance of rptrAddrSearchAddress
+            is set.  If the agent detects the address on exactly
+            one port, it will set this object to 'single', and
+            set the corresponding instances of
+            rptrAddrSearchGroup and rptrAddrSearchPort to reflect
+            the group and port on which the address was heard.
+            If the agent detects the address on more than one
+            port, it will set this object to 'multiple'."
+    ::= { rptrAddrSearchEntry 4 }
+
+rptrAddrSearchGroup OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The group from which an error-free frame whose
+            source address is equal to the corresponding instance
+            of rptrAddrSearchAddress has been received.  The
+            value of this object is undefined when the
+            corresponding instance of rptrAddrSearchState is
+
+            equal to 'none' or 'multiple'."
+    ::= { rptrAddrSearchEntry 5 }
+
+rptrAddrSearchPort OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The port rom which an error-free frame whose
+            source address is equal to the corresponding instance
+            of rptrAddrSearchAddress has been received.  The
+            value of this object is undefined when the
+            corresponding instance of rptrAddrSearchState is
+            equal to 'none' or 'multiple'."
+    ::= { rptrAddrSearchEntry 6 }
+
+rptrAddrSearchOwner OBJECT-TYPE
+    SYNTAX     OwnerString
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The entity which currently has 'ownership' of this
+            rptrAddrSearchEntry."
+    ::= { rptrAddrSearchEntry 7 }
+
+--
+-- The Port Address Tracking Table
+--
+-- This table provides a way for a network management
+-- application to passively gather information (using
+-- read-only privileges) about which network addresses
+-- are connected to which ports of a repeater.
+--
+
+rptrAddrTrackTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrAddrTrackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Table of address mapping information about the
+            ports."
+    ::= { rptrAddrTrackPortInfo 1 }
+
+rptrAddrTrackEntry OBJECT-TYPE
+    SYNTAX      RptrAddrTrackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry in the table, containing address mapping
+            information about a single port."
+    INDEX    { rptrAddrTrackGroupIndex, rptrAddrTrackPortIndex }
+    ::= { rptrAddrTrackTable 1 }
+
+RptrAddrTrackEntry ::=
+    SEQUENCE {
+        rptrAddrTrackGroupIndex
+            INTEGER,
+        rptrAddrTrackPortIndex
+            INTEGER,
+        rptrAddrTrackLastSourceAddress     -- DEPRECATED OBJECT
+            MacAddress,
+        rptrAddrTrackSourceAddrChanges
+            Counter32,
+        rptrAddrTrackNewLastSrcAddress
+            OptMacAddr,
+        rptrAddrTrackCapacity
+            Integer32
+    }
+
+rptrAddrTrackGroupIndex OBJECT-TYPE
+    SYNTAX      INTEGER (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the group containing the
+            port for which this entry contains information."
+    ::= { rptrAddrTrackEntry 1 }
+
+rptrAddrTrackPortIndex OBJECT-TYPE
+    SYNTAX      INTEGER (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifies the port within the group
+            for which this entry contains information."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID."
+    ::= { rptrAddrTrackEntry 2 }
+
+rptrAddrTrackLastSourceAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            This object is the SourceAddress of the last
+            readable frame (i.e., counted by
+            rptrMonitorPortReadableFrames) received by this
+            port.
+
+            This object has been deprecated because its value
+            is undefined when no frames have been observed on
+            this port.  The replacement object is
+            rptrAddrTrackNewLastSrcAddress."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.18, aLastSourceAddress."
+    ::= { rptrAddrTrackEntry 3 }
+
+rptrAddrTrackSourceAddrChanges OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented by one for each time
+            that the rptrAddrTrackLastSourceAddress attribute
+            for this port has changed.
+
+            This may indicate whether a link is connected to a
+            single DTE or another multi-user segment.
+
+            A discontinuity may occur in the value when the
+            value of object rptrMonitorPortLastChange changes.
+
+            The approximate minimum time for rollover of this
+            counter is 81 hours in a 10Mb/s repeater."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.19, aSourceAddressChanges."
+    ::= { rptrAddrTrackEntry 4 }
+
+rptrAddrTrackNewLastSrcAddress OBJECT-TYPE
+    SYNTAX      OptMacAddr
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object is the SourceAddress of the last
+            readable frame (i.e., counted by
+            rptrMonitorPortReadableFrames) received by this
+            port.  If no frames have been received by this
+            port since the agent began monitoring the port
+            activity, the agent shall return a string of
+            length zero."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.18, aLastSourceAddress."
+    ::= { rptrAddrTrackEntry 5 }
+
+rptrAddrTrackCapacity OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of addresses that can be
+            detected on this port. This value indicates
+            to the maximum  number of entries in the
+            rptrExtAddrTrackTable relative to this port.
+
+            If this object has the value of 1, the agent
+            implements only the LastSourceAddress mechanism
+            described by RFC 1368 or RFC 1516."
+    ::= { rptrAddrTrackEntry 6 }
+
+-- Table for multiple addresses per port
+
+rptrExtAddrTrackTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrExtAddrTrackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table to extend the address tracking table (i.e.,
+            rptrAddrTrackTable) with a list of source MAC
+            addresses that were recently received on each port.
+            The number of ports is the same as the number
+            of entries in table rptrPortTable. The number of
+            entries in this table depends on the agent/repeater
+            implementation and the number of different
+            addresses received on each port.
+
+            The first entry for each port contains
+            the same MAC address that is given by the
+            rptrAddrTrackNewLastSrcAddress for that port.
+
+            Entries in this table for a particular port are
+            retained when that port is switched from one
+            repeater to another.
+
+            The ordering of MAC addresses listed for a
+            particular port is implementation dependent."
+    ::= { rptrAddrTrackPortInfo 2 }
+
+rptrExtAddrTrackEntry OBJECT-TYPE
+    SYNTAX      RptrExtAddrTrackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A row in the table of extended address tracking
+            information for ports. Entries can not be directly
+            created or deleted via SNMP operations."
+    INDEX       { rptrAddrTrackGroupIndex,
+                  rptrAddrTrackPortIndex,
+                  rptrExtAddrTrackMacIndex }
+    ::= { rptrExtAddrTrackTable 1 }
+
+RptrExtAddrTrackEntry ::= SEQUENCE {
+    rptrExtAddrTrackMacIndex Integer32,
+    rptrExtAddrTrackSourceAddress MacAddress
+    }
+
+rptrExtAddrTrackMacIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The index of a source MAC address seen on
+            the port.
+
+            The ordering of MAC addresses listed for a
+            particular port is implementation dependent.
+
+            There is no implied relationship between a
+            particular index and a particular MAC
+            address.  The index for a particular MAC
+            address may change without notice."
+    ::= { rptrExtAddrTrackEntry 1 }
+
+rptrExtAddrTrackSourceAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The source MAC address from a readable frame
+            (i.e., counted by rptrMonitorPortReadableFrames)
+            recently received by the port."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.3.1.18, aLastSourceAddress."
+    ::= { rptrExtAddrTrackEntry 2 }
+
+-- The Repeater Top "N" Port Group
+
+-- The Repeater Top N Port group is used to prepare reports that
+-- describe a list of ports ordered by one of the statistics in the
+-- Repeater Monitor Port Table.  The statistic chosen by the
+-- management station is sampled over a management
+-- station-specified time interval, making the report rate based.
+-- The management station also specifies the number of ports that
+-- are reported.
+--
+-- The rptrTopNPortControlTable is used to initiate the generation
+-- of a report.  The management station may select the parameters
+-- of such a report, such as which repeater, which statistic, how
+-- many ports, and the start & stop times of the sampling.  When
+-- the report is prepared, entries are created in the
+-- rptrTopNPortTable associated with the relevent
+-- rptrTopNControlEntry.  These entries are static for
+-- each report after it has been prepared.
+
+-- Note that counter discontinuities may appear in some
+-- implementations if ports' assignment to repeaters changes
+-- during the collection of data for a Top "N" report.
+-- A management application could read the corresponding
+-- rptrMonitorPortLastChange timestamp in order to check
+-- whether a discontinuity occurred.
+
+rptrTopNPortControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrTopNPortControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of control records for reports on the top `N'
+        ports for the rate of a selected counter. The number
+        of entries depends on the configuration of the agent.
+        The maximum number of entries is implementation
+        dependent."
+    ::= { rptrTopNPortInfo 1 }
+
+rptrTopNPortControlEntry OBJECT-TYPE
+    SYNTAX      RptrTopNPortControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A set of parameters that control the creation of a
+            report of the top N ports according to several metrics."
+    INDEX    { rptrTopNPortControlIndex }
+    ::= { rptrTopNPortControlTable 1 }
+
+RptrTopNPortControlEntry ::= SEQUENCE {
+
+    rptrTopNPortControlIndex
+        Integer32,
+    rptrTopNPortRepeaterId
+        Integer32,
+    rptrTopNPortRateBase
+        INTEGER,
+    rptrTopNPortTimeRemaining
+        Integer32,
+    rptrTopNPortDuration
+        Integer32,
+    rptrTopNPortRequestedSize
+        Integer32,
+    rptrTopNPortGrantedSize
+        Integer32,
+    rptrTopNPortStartTime
+        TimeStamp,
+    rptrTopNPortOwner
+        OwnerString,
+    rptrTopNPortRowStatus
+        RowStatus
+}
+
+rptrTopNPortControlIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1 .. 65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            rptrTopNPortControl table.  Each such entry defines
+            one top N report prepared for a repeater or system."
+    ::= { rptrTopNPortControlEntry 1 }
+
+rptrTopNPortRepeaterId OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "Identifies the repeater for which a top N report will
+            be prepared (see rptrInfoId).  If the value of this
+            object is positive, only ports assigned to this repeater
+            will be used to form the list in which to order the
+            Top N table.  If this value is zero, all ports will be
+            eligible for inclusion on the list.
+
+            The value of this object may not be modified if the
+            associated rptrTopNPortRowStatus object is equal to
+            active(1).
+
+            If, for a particular row in this table, the repeater
+            specified by the value of this object goes away (is
+            removed from the rptrInfoTable) while the associated
+            rptrTopNPortRowStatus object is equal to active(1),
+            the row in this table is preserved by the agent but
+            the value of rptrTopNPortRowStatus is changed to
+            notInService(2), and the agent may time out the row
+            if appropriate.  If the specified repeater comes
+            back (reappears in the rptrInfoTable) before the row
+            has been timed out, the management station must set
+            the value of the rptrTopNPortRowStatus object back
+            to active(1) if desired (the agent doesn't do this
+            automatically)."
+    ::= { rptrTopNPortControlEntry 2 }
+
+rptrTopNPortRateBase OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                  readableFrames(1),
+                  readableOctets(2),
+                  fcsErrors(3),
+                  alignmentErrors(4),
+                  frameTooLongs(5),
+                  shortEvents(6),
+                  runts(7),
+                  collisions(8),
+                  lateEvents(9),
+                  veryLongEvents(10),
+                  dataRateMismatches(11),
+                  autoPartitions(12),
+                  totalErrors(13),
+                  isolates(14),
+                  symbolErrors(15)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The monitored variable, which the rptrTopNPortRate
+            variable is based upon.
+
+            The value of this object may not be modified if
+            the associated rptrTopNPortRowStatus object has
+            a value of active(1)."
+    ::= { rptrTopNPortControlEntry 3 }
+
+rptrTopNPortTimeRemaining OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The number of seconds left in the report
+            currently being collected.  When this object
+            is modified by the management station, a new
+            collection is started, possibly aborting a
+            currently running report.  The new value is
+            used as the requested duration of this report,
+            which is loaded into the associated
+            rptrTopNPortDuration object.
+
+            When this object is set to a non-zero value,
+            any associated rptrTopNPortEntries shall be
+            made inaccessible by the agent.  While the value
+            of this object is non-zero, it decrements by one
+            per second until it reaches zero.  During this
+            time, all associated rptrTopNPortEntries shall
+            remain inaccessible.  At the time that this object
+            decrements to zero, the report is made accessible
+            in the rptrTopNPortTable.  Thus, the rptrTopNPort
+            table needs to be created only at the end of the
+            collection interval.
+
+            If the value of this object is set to zero
+            while the associated report is running, the
+            running report is aborted and no associated
+            rptrTopNPortEntries are created."
+    DEFVAL { 0 }
+    ::= { rptrTopNPortControlEntry 4 }
+
+rptrTopNPortDuration OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of seconds that this report has
+            collected during the last sampling interval,
+            or if this report is currently being collected,
+            the number of seconds that this report is being
+            collected during this sampling interval.
+
+            When the associated rptrTopNPortTimeRemaining
+            object is set, this object shall be set by the
+            agent to the same value and shall not be modified
+            until the next time the rptrTopNPortTimeRemaining
+            is set.
+
+            This value shall be zero if no reports have been
+            requested for this rptrTopNPortControlEntry."
+     ::= { rptrTopNPortControlEntry 5 }
+
+rptrTopNPortRequestedSize OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of repeater ports requested
+            for the Top N Table.
+
+            When this object is created or modified, the
+            agent should set rptrTopNPortGrantedSize as close
+            to this object as is possible for the particular
+            implementation and available resources."
+    DEFVAL { 10 }
+    ::= { rptrTopNPortControlEntry 6 }
+
+rptrTopNPortGrantedSize OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The maximum number of repeater ports in the
+            top N table.
+
+            When the associated rptrTopNPortRequestedSize object is
+            created or modified, the agent should set this object as
+            closely to the requested value as is possible for the
+            particular implementation and available resources.  The
+            agent must not lower this value except as a result of a
+            set to the associated rptrTopNPortRequestedSize object."
+    ::= { rptrTopNPortControlEntry 7 }
+
+rptrTopNPortStartTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime when this top N report was
+            last started.  In other words, this is the time that
+            the associated rptrTopNPortTimeRemaining object was
+            modified to start the requested report.
+
+            If the report has not yet been started, the value
+            of this object is zero."
+    ::= { rptrTopNPortControlEntry 8 }
+
+rptrTopNPortOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "The entity that configured this entry and is
+            using the resources assigned to it."
+    ::= { rptrTopNPortControlEntry 9 }
+
+rptrTopNPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this row.
+
+           If the value of this object is not equal to
+           active(1), all associated entries in the
+           rptrTopNPortTable shall be deleted by the
+           agent."
+    ::= { rptrTopNPortControlEntry 10 }
+
+-- Top "N" reports
+
+rptrTopNPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF RptrTopNPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table of reports for the top `N' ports based on
+            setting of associated control table entries. The
+            maximum number of entries depends on the number
+            of entries in table rptrTopNPortControlTable and
+            the value of object rptrTopNPortGrantedSize for
+            each entry.
+
+            For each entry in the rptrTopNPortControlTable,
+            repeater ports with the highest value of
+            rptrTopNPortRate shall be placed in this table
+            in decreasing order of that rate until there is
+            no more room or until there are no more ports."
+    ::= { rptrTopNPortInfo 2 }
+
+rptrTopNPortEntry OBJECT-TYPE
+    SYNTAX      RptrTopNPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A set of statistics for a repeater port that is
+            part of a top N report."
+    INDEX    { rptrTopNPortControlIndex,
+               rptrTopNPortIndex }
+    ::= { rptrTopNPortTable 1 }
+
+RptrTopNPortEntry ::= SEQUENCE {
+    rptrTopNPortIndex
+        Integer32,
+    rptrTopNPortGroupIndex
+        Integer32,
+    rptrTopNPortPortIndex
+        Integer32,
+    rptrTopNPortRate
+        Gauge32
+}
+
+rptrTopNPortIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in
+            the rptrTopNPort table among those in the same
+            report.  This index is between 1 and N, where N
+            is the number of entries in this report.  Increasing
+            values of rptrTopNPortIndex shall be assigned to
+            entries with decreasing values of rptrTopNPortRate
+            until index N is assigned to the entry with the
+            lowest value of rptrTopNPortRate or there are no
+            more rptrTopNPortEntries.
+
+            No ports are included in a report where their
+            value of rptrTopNPortRate would be zero."
+    ::= { rptrTopNPortEntry 1 }
+
+rptrTopNPortGroupIndex OBJECT-TYPE
+    SYNTAX      Integer32  (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object identifes the group containing
+            the port for this entry. (See also object
+            type rptrGroupIndex.)"
+    ::= { rptrTopNPortEntry 2 }
+
+rptrTopNPortPortIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The index of the repeater port.
+        (See object type rptrPortIndex.)"
+    ::= { rptrTopNPortEntry 3 }
+
+rptrTopNPortRate OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The amount of change in the selected variable
+            during this sampling interval for the identified
+            port.  The selected variable is that port's
+            instance of the object selected by
+            rptrTopNPortRateBase."
+    ::= { rptrTopNPortEntry 4 }
+
+-- Notifications for use by Repeaters
+
+rptrHealth NOTIFICATION-TYPE
+    OBJECTS     { rptrOperStatus }
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            In a system containing a single managed repeater,
+            the rptrHealth notification conveys information
+            related to the operational status of the repeater.
+            It is sent either when the value of
+            rptrOperStatus changes, or upon completion of a
+            non-disruptive test.
+
+            The rptrHealth notification must contain the
+            rptrOperStatus object.  The agent may optionally
+            include the rptrHealthText object in the varBind
+            list.  See the rptrOperStatus and rptrHealthText
+            objects for descriptions of the information that
+            is sent.
+
+            The agent must throttle the generation of
+            consecutive rptrHealth traps so that there is at
+            least a five-second gap between traps of this
+            type.  When traps are throttled, they are dropped,
+            not queued for sending at a future time.  (Note
+
+            that 'generating' a trap means sending to all
+            configured recipients.)"
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.3.1, nRepeaterHealth
+            notification."
+    ::= { snmpDot3RptrMgt 0 1 }
+
+rptrGroupChange NOTIFICATION-TYPE
+    OBJECTS     { rptrGroupIndex }
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            In a system containing a single managed repeater,
+            this notification is sent when a change occurs in the
+            group structure of the repeater.  This occurs only
+            when a group is logically or physically removed
+            from or added to a repeater.  The varBind list
+            contains the identifier of the group that was
+            removed or added.
+
+            The agent must throttle the generation of
+            consecutive rptrGroupChange traps for the same
+            group so that there is at least a five-second gap
+            between traps of this type.  When traps are
+            throttled, they are dropped, not queued for
+            sending at a future time.  (Note that 'generating'
+            a trap means sending to all configured
+            recipients.)"
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.3.3, nGroupMapChange
+            notification."
+    ::= { snmpDot3RptrMgt 0 2 }
+
+rptrResetEvent NOTIFICATION-TYPE
+    OBJECTS     { rptrOperStatus }
+    STATUS      deprecated
+    DESCRIPTION
+            "********* THIS OBJECT IS DEPRECATED **********
+
+            In a system containing a single managed repeater-unit,
+            the rptrResetEvent notification conveys information
+            related to the operational status of the repeater.
+            This trap is sent on completion of a repeater
+            reset action.  A repeater reset action is defined
+            as an a transition to the START state of Fig 9-2
+            in section 9 [IEEE 802.3 Std], when triggered by a
+            management command (e.g., an SNMP Set on the
+
+            rptrReset object).
+
+            The agent must throttle the generation of
+            consecutive rptrResetEvent traps so that there is
+            at least a five-second gap between traps of this
+            type.  When traps are throttled, they are dropped,
+            not queued for sending at a future time.  (Note
+            that 'generating' a trap means sending to all
+            configured recipients.)
+
+            The rptrResetEvent trap is not sent when the agent
+            restarts and sends an SNMP coldStart or warmStart
+            trap.  However, it is recommended that a repeater
+            agent send the rptrOperStatus object as an
+            optional object with its coldStart and warmStart
+            trap PDUs.
+
+            The rptrOperStatus object must be included in the
+            varbind list sent with this trap.  The agent may
+            optionally include the rptrHealthText object as
+            well."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.3.2, nRepeaterReset
+            notification."
+    ::= { snmpDot3RptrMgt 0 3 }
+
+-- Notifications for repeaters in a multiple-repeater implementation.
+-- An implementation may send either the single-repeater OR
+-- multiple-repeater version of these notifications (1 or 4; 2 or 5)
+-- but not both.
+
+rptrInfoHealth NOTIFICATION-TYPE
+    OBJECTS     { rptrInfoOperStatus }
+    STATUS      current
+    DESCRIPTION
+            "In a system containing multiple managed repeaters,
+            the rptrInfoHealth notification conveys information
+            related to the operational status of a repeater.
+            It is sent either when the value of rptrInfoOperStatus
+            changes, or upon completion of a non-disruptive test.
+
+            The agent must throttle the generation of
+            consecutive rptrInfoHealth notifications for
+            the same repeater so that there is at least
+            a five-second gap between notifications of this type.
+            When notifications are throttled, they are dropped,
+            not queued for sending at a future time.  (Note
+
+            that 'generating' a notification means sending
+            to all configured recipients.)"
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.3.1, nRepeaterHealth
+            notification."
+    ::= { snmpDot3RptrMgt 0 4 }
+
+rptrInfoResetEvent NOTIFICATION-TYPE
+    OBJECTS     { rptrInfoOperStatus }
+    STATUS      current
+    DESCRIPTION
+            "In a system containing multiple managed
+            repeaters, the rptrInfoResetEvent notification
+            conveys information related to the operational
+            status of a repeater. This notification is sent
+            on completion of a repeater reset action.  A
+            repeater reset action is defined as a transition
+            to the START state of Fig 9-2 in section 9 of
+            [IEEE 802.3 Std], when triggered by a management
+            command (e.g., an SNMP Set on the rptrInfoReset
+            object).
+
+            The agent must throttle the generation of
+            consecutive rptrInfoResetEvent notifications for
+            a single repeater so that there is at least
+            a five-second gap between notifications of
+            this type.  When notifications are throttled,
+            they are dropped, not queued for sending at
+            a future time.  (Note that 'generating' a
+            notification means sending to all configured
+            recipients.)
+
+            The rptrInfoResetEvent is not sent when the
+            agent restarts and sends an SNMP coldStart or
+            warmStart trap.  However, it is recommended that
+            a repeater agent send the rptrInfoOperStatus
+            object as an optional object with its coldStart
+            and warmStart trap PDUs."
+    REFERENCE
+            "[IEEE 802.3 Mgt], 30.4.1.3.2, nRepeaterReset
+            notification."
+    ::= { snmpDot3RptrMgt 0 5 }
+
+-- Conformance information
+
+snmpRptrModConf
+        OBJECT IDENTIFIER ::= { snmpRptrMod 1 }
+
+  snmpRptrModCompls
+        OBJECT IDENTIFIER ::= { snmpRptrModConf 1 }
+  snmpRptrModObjGrps
+        OBJECT IDENTIFIER ::= { snmpRptrModConf 2 }
+  snmpRptrModNotGrps
+        OBJECT IDENTIFIER ::= { snmpRptrModConf 3 }
+
+-- Object groups
+
+snmpRptrGrpBasic1516 OBJECT-GROUP
+    OBJECTS     { rptrGroupCapacity,
+                  rptrOperStatus,
+                  rptrHealthText,
+                  rptrReset,
+                  rptrNonDisruptTest,
+                  rptrTotalPartitionedPorts,
+                  rptrGroupIndex,
+                  rptrGroupDescr,
+                  rptrGroupObjectID,
+                  rptrGroupOperStatus,
+                  rptrGroupLastOperStatusChange,
+                  rptrGroupPortCapacity,
+                  rptrPortGroupIndex,
+                  rptrPortIndex,
+                  rptrPortAdminStatus,
+                  rptrPortAutoPartitionState,
+                  rptrPortOperStatus }
+    STATUS      deprecated
+    DESCRIPTION
+        "********* THIS GROUP IS DEPRECATED **********
+
+        Basic group from RFCs 1368 and 1516.
+
+        NOTE: this object group is DEPRECATED and replaced
+              with snmpRptrGrpBasic."
+    ::= { snmpRptrModObjGrps 1 }
+
+snmpRptrGrpMonitor1516 OBJECT-GROUP
+    OBJECTS     { rptrMonitorTransmitCollisions,
+                  rptrMonitorGroupIndex,
+                  rptrMonitorGroupTotalFrames,
+                  rptrMonitorGroupTotalOctets,
+                  rptrMonitorGroupTotalErrors,
+                  rptrMonitorPortGroupIndex,
+                  rptrMonitorPortIndex,
+                  rptrMonitorPortReadableFrames,
+                  rptrMonitorPortReadableOctets,
+                  rptrMonitorPortFCSErrors,
+                  rptrMonitorPortAlignmentErrors,
+                  rptrMonitorPortFrameTooLongs,
+                  rptrMonitorPortShortEvents,
+                  rptrMonitorPortRunts,
+                  rptrMonitorPortCollisions,
+                  rptrMonitorPortLateEvents,
+                  rptrMonitorPortVeryLongEvents,
+                  rptrMonitorPortDataRateMismatches,
+                  rptrMonitorPortAutoPartitions,
+                  rptrMonitorPortTotalErrors }
+    STATUS      deprecated
+    DESCRIPTION
+        "********* THIS GROUP IS DEPRECATED **********
+
+        Monitor group from RFCs 1368 and 1516.
+
+        NOTE: this object group is DEPRECATED and replaced
+              with snmpRptrGrpMonitor."
+    ::= { snmpRptrModObjGrps 2 }
+
+snmpRptrGrpAddrTrack1368 OBJECT-GROUP
+    OBJECTS     { rptrAddrTrackGroupIndex,
+                  rptrAddrTrackPortIndex,
+                  rptrAddrTrackLastSourceAddress,
+                  rptrAddrTrackSourceAddrChanges }
+    STATUS      obsolete
+    DESCRIPTION
+        "Address tracking group from RFC 1368.
+
+        NOTE: this object group is OBSOLETE and replaced
+              with snmpRptrGrpAddrTrack1516."
+    ::= { snmpRptrModObjGrps 3 }
+
+snmpRptrGrpAddrTrack1516 OBJECT-GROUP
+    OBJECTS     { rptrAddrTrackGroupIndex,
+                  rptrAddrTrackPortIndex,
+                  rptrAddrTrackLastSourceAddress,
+                  rptrAddrTrackSourceAddrChanges,
+                  rptrAddrTrackNewLastSrcAddress }
+    STATUS      deprecated
+    DESCRIPTION
+        "********* THIS GROUP IS DEPRECATED **********
+
+        Address tracking group from RFC 1516.
+
+        NOTE: this object group is DEPRECATED and
+              replaced with snmpRptrGrpAddrTrack."
+    ::= { snmpRptrModObjGrps 4 }
+
+snmpRptrGrpBasic OBJECT-GROUP
+    OBJECTS     { rptrGroupIndex,
+                  rptrGroupObjectID,
+                  rptrGroupOperStatus,
+                  rptrGroupPortCapacity,
+                  rptrPortGroupIndex,
+                  rptrPortIndex,
+                  rptrPortAdminStatus,
+                  rptrPortAutoPartitionState,
+                  rptrPortOperStatus,
+                  rptrPortRptrId,
+                  rptrInfoId,
+                  rptrInfoRptrType,
+                  rptrInfoOperStatus,
+                  rptrInfoReset,
+                  rptrInfoPartitionedPorts,
+                  rptrInfoLastChange }
+    STATUS      current
+    DESCRIPTION
+        "Basic group for a system with one or more
+        repeater-units in multi-segment (post-RFC 1516)
+        version of the MIB module."
+    ::= { snmpRptrModObjGrps 5 }
+
+snmpRptrGrpMonitor OBJECT-GROUP
+    OBJECTS     { rptrMonitorPortGroupIndex,
+                  rptrMonitorPortIndex,
+                  rptrMonitorPortReadableFrames,
+                  rptrMonitorPortReadableOctets,
+                  rptrMonitorPortFCSErrors,
+                  rptrMonitorPortAlignmentErrors,
+                  rptrMonitorPortFrameTooLongs,
+                  rptrMonitorPortShortEvents,
+                  rptrMonitorPortRunts,
+                  rptrMonitorPortCollisions,
+                  rptrMonitorPortLateEvents,
+                  rptrMonitorPortVeryLongEvents,
+                  rptrMonitorPortDataRateMismatches,
+                  rptrMonitorPortAutoPartitions,
+                  rptrMonitorPortTotalErrors,
+                  rptrMonitorPortLastChange,
+                  rptrMonTxCollisions,
+                  rptrMonTotalFrames,
+                  rptrMonTotalErrors,
+                  rptrMonTotalOctets }
+    STATUS      current
+    DESCRIPTION
+        "Monitor group for a system with one or more
+        repeater-units in multi-segment (post-RFC 1516)
+        version of the MIB module."
+    ::= { snmpRptrModObjGrps 6 }
+
+snmpRptrGrpMonitor100 OBJECT-GROUP
+    OBJECTS     { rptrMonitorPortIsolates,
+                  rptrMonitorPortSymbolErrors,
+                  rptrMonitorPortUpper32Octets,
+                  rptrMonUpper32TotalOctets }
+    STATUS      current
+    DESCRIPTION
+        "Monitor group for 100Mb/s ports and repeaters
+        in a system with one or more repeater-units in
+        multi-segment (post-RFC 1516) version of the MIB
+        module.  Systems which support Counter64 should
+        also implement snmpRptrGrpMonitor100w64."
+    ::= { snmpRptrModObjGrps 7 }
+
+snmpRptrGrpMonitor100w64 OBJECT-GROUP
+    OBJECTS     { rptrMonitorPortHCReadableOctets,
+                  rptrMonHCTotalOctets }
+    STATUS      current
+    DESCRIPTION
+        "Monitor group for 100Mb/s ports and repeaters in a
+        system with one or more repeater-units and support
+        for Counter64."
+    ::= { snmpRptrModObjGrps 8 }
+
+snmpRptrGrpAddrTrack OBJECT-GROUP
+    OBJECTS     { rptrAddrTrackGroupIndex,
+                  rptrAddrTrackPortIndex,
+                  rptrAddrTrackSourceAddrChanges,
+                  rptrAddrTrackNewLastSrcAddress,
+                  rptrAddrTrackCapacity }
+    STATUS      current
+    DESCRIPTION
+        "Passive address tracking group for post-RFC 1516
+        version of the MIB module."
+    ::= { snmpRptrModObjGrps 9 }
+
+snmpRptrGrpExtAddrTrack OBJECT-GROUP
+    OBJECTS     { rptrExtAddrTrackMacIndex,
+                  rptrExtAddrTrackSourceAddress }
+    STATUS      current
+    DESCRIPTION
+        "Extended passive address tracking group for
+        a system with one or more repeater-units in
+        post-RFC 1516 version of the MIB module."
+    ::= { snmpRptrModObjGrps 10 }
+
+snmpRptrGrpRptrAddrSearch OBJECT-GROUP
+    OBJECTS     { rptrAddrSearchLock,
+                  rptrAddrSearchStatus,
+                  rptrAddrSearchAddress,
+                  rptrAddrSearchState,
+                  rptrAddrSearchGroup,
+                  rptrAddrSearchPort,
+                  rptrAddrSearchOwner }
+    STATUS      current
+    DESCRIPTION
+        "Active MAC address search group and topology
+        mapping support for repeaters."
+    ::= { snmpRptrModObjGrps 11 }
+
+snmpRptrGrpTopNPort OBJECT-GROUP
+    OBJECTS     { rptrTopNPortControlIndex,
+                  rptrTopNPortRepeaterId,
+                  rptrTopNPortRateBase,
+                  rptrTopNPortTimeRemaining,
+                  rptrTopNPortDuration,
+                  rptrTopNPortRequestedSize,
+                  rptrTopNPortGrantedSize,
+                  rptrTopNPortStartTime,
+                  rptrTopNPortOwner,
+                  rptrTopNPortRowStatus,
+                  rptrTopNPortIndex,
+                  rptrTopNPortGroupIndex,
+                  rptrTopNPortPortIndex,
+                  rptrTopNPortRate }
+    STATUS      current
+    DESCRIPTION
+        "Top `N' group for repeater ports."
+    ::= { snmpRptrModObjGrps 12 }
+
+-- Compliances
+
+snmpRptrModComplRFC1368 MODULE-COMPLIANCE
+    STATUS      obsolete
+    DESCRIPTION
+        "Compliance for RFC 1368.
+
+        NOTE: this module compliance is OBSOLETE and
+              replaced by snmpRptrModComplRFC1516."
+
+    MODULE -- this module
+        MANDATORY-GROUPS { snmpRptrGrpBasic1516 }
+
+        GROUP snmpRptrGrpMonitor1516
+        DESCRIPTION
+            "Implementation of this optional group is
+            recommended for systems which have the
+            instrumentation to do performance monitoring."
+
+        GROUP snmpRptrGrpAddrTrack1368
+        DESCRIPTION
+            "Implementation of this group is
+            recommended for systems which have
+            the necessary instrumentation."
+    ::= { snmpRptrModCompls 1 }
+
+snmpRptrModComplRFC1516 MODULE-COMPLIANCE
+    STATUS      deprecated
+    DESCRIPTION
+        "********* THIS COMPLIANCE IS DEPRECATED **********
+
+        Compliance for RFC 1516 and for backwards
+        compatibility with single-repeater,
+        10Mb/s-only implementations."
+
+    MODULE -- this module
+        MANDATORY-GROUPS { snmpRptrGrpBasic1516 }
+
+        GROUP snmpRptrGrpMonitor1516
+        DESCRIPTION
+            "Implementation of this optional group is
+            recommended for systems which have the
+            instrumentation to do performance monitoring."
+
+        GROUP snmpRptrGrpAddrTrack1516
+        DESCRIPTION
+            "Implementation of this group is
+            recommended for systems which have
+            the necessary instrumentation."
+    ::= { snmpRptrModCompls 2 }
+
+snmpRptrModCompl MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "Compliance for the multi-segment version of the
+        MIB module for a system with one or more
+        repeater-units."
+
+    MODULE -- this module
+        MANDATORY-GROUPS { snmpRptrGrpBasic,
+                           snmpRptrGrpMonitor,
+                           snmpRptrGrpAddrTrack }
+
+        GROUP snmpRptrGrpMonitor100
+        DESCRIPTION
+            "Implementation of this group is
+            mandatory for managed systems which
+            contain 100Mb/s repeaters."
+
+        GROUP snmpRptrGrpMonitor100w64
+        DESCRIPTION
+            "Implementation of this group is
+            mandatory for managed systems which
+            contain 100Mb/s repeaters and which
+            can support Counter64."
+
+        GROUP snmpRptrGrpExtAddrTrack
+        DESCRIPTION
+            "Implementation of this group is
+            recommended for systems which have
+            the necessary instrumentation to track
+            MAC addresses of multiple DTEs attached
+            to a single repeater port."
+
+        GROUP snmpRptrGrpRptrAddrSearch
+        DESCRIPTION
+            "Implementation of this group is
+            recommended for systems which allow
+            read-write access and which have
+            the necessary instrumentation to
+            search all incoming data streams
+            for a particular MAC address."
+
+        GROUP snmpRptrGrpTopNPort
+        DESCRIPTION
+            "Implementation of this group is
+            recommended for systems which have
+
+            the necessary resources to support
+            TopN statistics reporting."
+    ::= { snmpRptrModCompls 3 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-SSH-TM-MIB.mib b/snmp_builder/mibs/SNMP-SSH-TM-MIB.mib
new file mode 100644
index 0000000..4e0d828
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-SSH-TM-MIB.mib
@@ -0,0 +1,329 @@
+SNMP-SSH-TM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    OBJECT-IDENTITY, mib-2, snmpDomains,
+    Counter32
+      FROM SNMPv2-SMI -- RFC 2578
+    TEXTUAL-CONVENTION
+      FROM SNMPv2-TC -- RFC 2579
+    MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF -- RFC 2580
+    ;
+
+snmpSshtmMIB MODULE-IDENTITY
+    LAST-UPDATED "200906090000Z"
+    ORGANIZATION "ISMS Working Group"
+    CONTACT-INFO "WG-EMail:   isms@lists.ietf.org
+                  Subscribe:  isms-request@lists.ietf.org
+
+                  Chairs:
+                    Juergen Quittek
+                    NEC Europe Ltd.
+                    Network Laboratories
+                    Kurfuersten-Anlage 36
+                    69115 Heidelberg
+                    Germany
+                    +49 6221 90511-15
+                    quittek@netlab.nec.de
+
+                    Juergen Schoenwaelder
+                    Jacobs University Bremen
+                    Campus Ring 1
+                    28725 Bremen
+                    Germany
+                    +49 421 200-3587
+                    j.schoenwaelder@jacobs-university.de
+
+                  Co-editors:
+                    David Harrington
+                    Huawei Technologies USA
+                    1700 Alma Drive
+                    Plano Texas 75075
+
+                    USA
+                    +1 603-436-8634
+                    ietfdbh@comcast.net
+
+                    Joseph Salowey
+                    Cisco Systems
+                    2901 3rd Ave
+                    Seattle, WA 98121
+                    USA
+                    jsalowey@cisco.com
+
+                    Wes Hardaker
+                    Cobham Analytic Solutions
+                    P.O. Box 382
+                    Davis, CA  95617
+                    USA
+                    +1 530 792 1913
+                    ietf@hardakers.net
+                 "
+    DESCRIPTION
+       "The Secure Shell Transport Model MIB.
+
+        Copyright (c) 2009 IETF Trust and the persons
+        identified as authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, are permitted provided that the
+        following conditions are met:
+
+        - Redistributions of source code must retain the above copyright
+          notice, this list of conditions and the following disclaimer.
+
+        - Redistributions in binary form must reproduce the above
+          copyright notice, this list of conditions and the following
+          disclaimer in the documentation and/or other materials
+          provided with the distribution.
+
+        - Neither the name of Internet Society, IETF or IETF Trust,
+          nor the names of specific contributors, may be used to endorse
+          or promote products derived from this software without
+          specific prior written permission.
+
+        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+        CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+        INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+        MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+        DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+        CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+        SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+        NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+        LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+        HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+        CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+        OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+        EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+        This version of this MIB module is part of RFC 5592;
+        see the RFC itself for full legal notices."
+
+    REVISION     "200906090000Z"
+    DESCRIPTION  "The initial version, published in RFC 5592."
+    ::= { mib-2 189 }
+
+-- ---------------------------------------------------------- --
+-- subtrees in the SNMP-SSH-TM-MIB
+-- ---------------------------------------------------------- --
+
+snmpSshtmNotifications    OBJECT IDENTIFIER ::= { snmpSshtmMIB 0 }
+snmpSshtmObjects          OBJECT IDENTIFIER ::= { snmpSshtmMIB 1 }
+snmpSshtmConformance      OBJECT IDENTIFIER ::= { snmpSshtmMIB 2 }
+
+-- -------------------------------------------------------------
+-- Objects
+-- -------------------------------------------------------------
+
+snmpSSHDomain OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SNMP-over-SSH transport domain.  The corresponding
+         transport address is of type SnmpSSHAddress.
+
+         When an SNMP entity uses the snmpSSHDomain Transport
+         Model, it must be capable of accepting messages up to
+         and including 8192 octets in size.  Implementation of
+         larger values is encouraged whenever possible.
+
+         The securityName prefix to be associated with the
+         snmpSSHDomain is 'ssh'.  This prefix may be used by Security
+         Models or other components to identify which secure transport
+         infrastructure authenticated a securityName."
+    ::= { snmpDomains 7 }
+
+SnmpSSHAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1a"
+    STATUS      current
+    DESCRIPTION
+        "Represents either a hostname or IP address, along with a port
+         number and an optional user name.
+
+         The beginning of the address specification may contain a
+         user name followed by an '@' (US-ASCII character 0x40).  This
+         portion of the address will indicate the user name that should
+         be used when authenticating to an SSH server.  The user name
+         must be encoded in UTF-8 (per [RFC4252]).  If missing, the
+         SNMP securityName should be used.  After the optional user
+         name field and '@' character comes the hostname or IP
+         address.
+
+         The hostname is always in US-ASCII (as per RFC1033);
+         internationalized hostnames are encoded in US-ASCII as
+         specified in RFC 3490.  The hostname is followed by a colon
+         ':' (US-ASCII character 0x3A) and a decimal port number in
+         US-ASCII.  The name SHOULD be fully qualified whenever
+         possible.
+
+         An IPv4 address must be in dotted decimal format followed
+         by a colon ':' (US-ASCII character 0x3A) and a decimal port
+         number in US-ASCII.
+
+         An IPv6 address must be in colon-separated format, surrounded
+         by square brackets ('[', US-ASCII character 0x5B, and ']',
+         US-ASCII character 0x5D), followed by a colon ':' (US-ASCII
+         character 0x3A) and a decimal port number in US-ASCII.
+
+         Values of this Textual Convention might not be directly usable
+         as transport-layer addressing information and may require
+         runtime resolution.  As such, applications that write them
+         must be prepared for handling errors if such values are
+         not supported or cannot be resolved (if resolution occurs
+         at the time of the management operation).
+
+         The DESCRIPTION clause of TransportAddress objects that may
+         have snmpSSHAddress values must fully describe how (and
+         when) such names are to be resolved to IP addresses and vice
+         versa.
+
+         This Textual Convention SHOULD NOT be used directly in
+         object definitions since it restricts addresses to a
+         specific format.  However, if it is used, it MAY be used
+         either on its own or in conjunction with
+         TransportAddressType or TransportDomain as a pair.
+
+         When this Textual Convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers, which is specified in SMIv2 (STD 58).  It
+         is RECOMMENDED that all MIB documents using this Textual
+         Convention make explicit any limitations on index
+         component lengths that management software must observe.
+         This may be done either by including SIZE constraints on
+         the index components or by specifying applicable
+         constraints in the conceptual row DESCRIPTION clause or
+         in the surrounding documentation.
+        "
+    REFERENCE
+      "RFC 1033: DOMAIN ADMINISTRATORS OPERATIONS GUIDE
+       RFC 3490: Internationalizing Domain Names in Applications
+       RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
+       RFC 4252: The Secure Shell (SSH) Authentication Protocol"
+    SYNTAX      OCTET STRING (SIZE (1..255))
+
+-- The snmpSshtmSession Group
+
+snmpSshtmSession       OBJECT IDENTIFIER ::= { snmpSshtmObjects 1 }
+
+snmpSshtmSessionOpens  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times an openSession() request has been
+                 executed as an SSH client, whether it succeeded or
+                 failed.
+                "
+    ::= { snmpSshtmSession 1 }
+
+snmpSshtmSessionCloses  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times a closeSession() request has been
+                 executed as an SSH client, whether it succeeded or
+                 failed.
+                "
+    ::= { snmpSshtmSession 2 }
+
+snmpSshtmSessionOpenErrors  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times an openSession() request
+                 failed to open a transport connection or failed to
+                 authenticate the server.
+                "
+    ::= { snmpSshtmSession 3 }
+
+snmpSshtmSessionUserAuthFailures  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times an openSession() request
+                 failed to open a session as an SSH client due to
+                 user-authentication failures.
+                "
+    ::= { snmpSshtmSession 4 }
+
+snmpSshtmSessionNoChannels  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times an openSession() request
+                 failed to open a session as an SSH client due to
+                 channel-open failures.
+                "
+    ::= { snmpSshtmSession 5 }
+
+snmpSshtmSessionNoSubsystems OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times an openSession() request
+                 failed to open a session as an SSH client due to
+                 inability to connect to the requested subsystem.
+                "
+    ::= { snmpSshtmSession 6 }
+
+snmpSshtmSessionNoSessions  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times an outgoing message was
+                 dropped because the same session was no longer
+                 available.
+                "
+    ::= { snmpSshtmSession 7 }
+
+snmpSshtmSessionInvalidCaches OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of outgoing messages dropped because the
+                 tmStateReference referred to an invalid cache.
+                "
+    ::= { snmpSshtmSession 8 }
+
+-- ************************************************
+-- snmpSshtmMIB - Conformance Information
+-- ************************************************
+
+snmpSshtmCompliances OBJECT IDENTIFIER ::= { snmpSshtmConformance 1 }
+
+snmpSshtmGroups      OBJECT IDENTIFIER ::= { snmpSshtmConformance 2 }
+
+-- ************************************************
+-- Compliance statements
+-- ************************************************
+
+snmpSshtmCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION "The compliance statement for SNMP engines that
+                 support the SNMP-SSH-TM-MIB."
+    MODULE
+        MANDATORY-GROUPS { snmpSshtmGroup }
+    ::= { snmpSshtmCompliances 1 }
+
+-- ************************************************
+-- Units of conformance
+-- ************************************************
+
+snmpSshtmGroup OBJECT-GROUP
+    OBJECTS {
+      snmpSshtmSessionOpens,
+      snmpSshtmSessionCloses,
+      snmpSshtmSessionOpenErrors,
+      snmpSshtmSessionUserAuthFailures,
+      snmpSshtmSessionNoChannels,
+      snmpSshtmSessionNoSubsystems,
+      snmpSshtmSessionNoSessions,
+      snmpSshtmSessionInvalidCaches
+    }
+    STATUS      current
+    DESCRIPTION "A collection of objects for maintaining information
+                 of an SNMP engine that implements the SNMP Secure
+                 Shell Transport Model.
+                "
+    ::= { snmpSshtmGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-TARGET-MIB.mib b/snmp_builder/mibs/SNMP-TARGET-MIB.mib
new file mode 100644
index 0000000..654afdd
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-TARGET-MIB.mib
@@ -0,0 +1,660 @@
+SNMP-TARGET-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    snmpModules,
+    Counter32,
+    Integer32
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION,
+    TDomain,
+    TAddress,
+    TimeInterval,
+    RowStatus,
+    StorageType,
+    TestAndIncr
+        FROM SNMPv2-TC
+
+    SnmpSecurityModel,
+    SnmpMessageProcessingModel,
+    SnmpSecurityLevel,
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+snmpTargetMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+        "WG-email:   snmpv3@lists.tislabs.com
+         Subscribe:  majordomo@lists.tislabs.com
+                     In message body:  subscribe snmpv3
+
+         Co-Chair:   Russ Mundy
+                     Network Associates Laboratories
+         Postal:     15204 Omega Drive, Suite 300
+                     Rockville, MD 20850-4601
+                     USA
+         EMail:      mundy@tislabs.com
+         Phone:      +1 301-947-7107
+
+         Co-Chair:   David Harrington
+                     Enterasys Networks
+         Postal:     35 Industrial Way
+                     P. O. Box 5004
+                     Rochester, New Hampshire 03866-5005
+                     USA
+         EMail:      dbh@enterasys.com
+         Phone:      +1 603-337-2614
+
+         Co-editor:  David B. Levi
+                     Nortel Networks
+         Postal:     3505 Kesterwood Drive
+                     Knoxville, Tennessee 37918
+         EMail:      dlevi@nortelnetworks.com
+         Phone:      +1 865 686 0432
+
+         Co-editor:  Paul Meyer
+                     Secure Computing Corporation
+         Postal:     2675 Long Lake Road
+
+                     Roseville, Minnesota 55113
+         EMail:      paul_meyer@securecomputing.com
+         Phone:      +1 651 628 1592
+
+         Co-editor:  Bob Stewart
+                     Retired"
+    DESCRIPTION
+        "This MIB module defines MIB objects which provide
+         mechanisms to remotely configure the parameters used
+         by an SNMP entity for the generation of SNMP messages.
+
+         Copyright (C) The Internet Society (2002). This
+         version of this MIB module is part of RFC 3413;
+         see the RFC itself for full legal notices.
+        "
+    REVISION    "200210140000Z"             -- 14 October 2002
+    DESCRIPTION "Fixed DISPLAY-HINTS for UTF-8 strings, fixed hex
+                 value of LF characters, clarified meaning of zero
+                 length tag values, improved tag list examples.
+                 Published as RFC 3413."
+    REVISION    "199808040000Z"             -- 4 August 1998
+    DESCRIPTION "Clarifications, published as
+                 RFC 2573."
+    REVISION    "199707140000Z"             -- 14 July 1997
+    DESCRIPTION "The initial revision, published as RFC2273."
+    ::= { snmpModules 12 }
+
+snmpTargetObjects       OBJECT IDENTIFIER ::= { snmpTargetMIB 1 }
+snmpTargetConformance   OBJECT IDENTIFIER ::= { snmpTargetMIB 3 }
+
+SnmpTagValue ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS       current
+    DESCRIPTION
+        "An octet string containing a tag value.
+         Tag values are preferably in human-readable form.
+
+         To facilitate internationalization, this information
+         is represented using the ISO/IEC IS 10646-1 character
+         set, encoded as an octet string using the UTF-8
+         character encoding scheme described in RFC 2279.
+
+         Since additional code points are added by amendments
+         to the 10646 standard from time to time,
+         implementations must be prepared to encounter any code
+         point from 0x00000000 to 0x7fffffff.
+
+         The use of control codes should be avoided, and certain
+
+         control codes are not allowed as described below.
+
+         For code points not directly supported by user
+         interface hardware or software, an alternative means
+         of entry and display, such as hexadecimal, may be
+         provided.
+
+         For information encoded in 7-bit US-ASCII, the UTF-8
+         representation is identical to the US-ASCII encoding.
+
+         Note that when this TC is used for an object that
+         is used or envisioned to be used as an index, then a
+         SIZE restriction must be specified so that the number
+         of sub-identifiers for any object instance does not
+         exceed the limit of 128, as defined by [RFC1905].
+
+         An object of this type contains a single tag value
+         which is used to select a set of entries in a table.
+
+         A tag value is an arbitrary string of octets, but
+         may not contain a delimiter character.  Delimiter
+         characters are defined to be one of the following:
+
+             -  An ASCII space character (0x20).
+
+             -  An ASCII TAB character (0x09).
+
+             -  An ASCII carriage return (CR) character (0x0D).
+
+             -  An ASCII line feed (LF) character (0x0A).
+
+         Delimiter characters are used to separate tag values
+         in a tag list.  An object of this type may only
+         contain a single tag value, and so delimiter
+         characters are not allowed in a value of this type.
+
+         Note that a tag value of 0 length means that no tag is
+         defined.  In other words, a tag value of 0 length would
+         never match anything in a tag list, and would never
+         select any table entries.
+
+         Some examples of valid tag values are:
+
+             - 'acme'
+
+             - 'router'
+
+             - 'host'
+
+         The use of a tag value to select table entries is
+         application and MIB specific."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+SnmpTagList ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS       current
+    DESCRIPTION
+        "An octet string containing a list of tag values.
+         Tag values are preferably in human-readable form.
+
+         To facilitate internationalization, this information
+         is represented using the ISO/IEC IS 10646-1 character
+         set, encoded as an octet string using the UTF-8
+         character encoding scheme described in RFC 2279.
+
+         Since additional code points are added by amendments
+         to the 10646 standard from time to time,
+         implementations must be prepared to encounter any code
+         point from 0x00000000 to 0x7fffffff.
+
+         The use of control codes should be avoided, except as
+         described below.
+
+         For code points not directly supported by user
+         interface hardware or software, an alternative means
+         of entry and display, such as hexadecimal, may be
+         provided.
+
+         For information encoded in 7-bit US-ASCII, the UTF-8
+         representation is identical to the US-ASCII encoding.
+
+         An object of this type contains a list of tag values
+         which are used to select a set of entries in a table.
+
+         A tag value is an arbitrary string of octets, but
+         may not contain a delimiter character.  Delimiter
+         characters are defined to be one of the following:
+
+             -  An ASCII space character (0x20).
+
+             -  An ASCII TAB character (0x09).
+
+             -  An ASCII carriage return (CR) character (0x0D).
+
+             -  An ASCII line feed (LF) character (0x0A).
+
+         Delimiter characters are used to separate tag values
+
+         in a tag list.  Only a single delimiter character may
+         occur between two tag values.  A tag value may not
+         have a zero length.  These constraints imply certain
+         restrictions on the contents of this object:
+
+             - There cannot be a leading or trailing delimiter
+               character.
+
+             - There cannot be multiple adjacent delimiter
+               characters.
+
+         Some examples of valid tag lists are:
+
+             - ''                        -- an empty list
+
+             - 'acme'                    -- list of one tag
+
+             - 'host router bridge'      -- list of several tags
+
+         Note that although a tag value may not have a length of
+         zero, an empty string is still valid.  This indicates
+         an empty list (i.e. there are no tag values in the list).
+
+         The use of the tag list to select table entries is
+         application and MIB specific.  Typically, an application
+         will provide one or more tag values, and any entry
+         which contains some combination of these tag values
+         will be selected."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+--
+--
+-- The snmpTargetObjects group
+--
+--
+
+snmpTargetSpinLock OBJECT-TYPE
+    SYNTAX      TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object is used to facilitate modification of table
+         entries in the SNMP-TARGET-MIB module by multiple
+         managers.  In particular, it is useful when modifying
+         the value of the snmpTargetAddrTagList object.
+
+         The procedure for modifying the snmpTargetAddrTagList
+         object is as follows:
+
+             1.  Retrieve the value of snmpTargetSpinLock and
+                 of snmpTargetAddrTagList.
+
+             2.  Generate a new value for snmpTargetAddrTagList.
+
+             3.  Set the value of snmpTargetSpinLock to the
+                 retrieved value, and the value of
+                 snmpTargetAddrTagList to the new value.  If
+                 the set fails for the snmpTargetSpinLock
+                 object, go back to step 1."
+    ::= { snmpTargetObjects 1 }
+
+snmpTargetAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpTargetAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of transport addresses to be used in the generation
+         of SNMP messages."
+    ::= { snmpTargetObjects 2 }
+
+snmpTargetAddrEntry OBJECT-TYPE
+    SYNTAX      SnmpTargetAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A transport address to be used in the generation
+         of SNMP operations.
+
+         Entries in the snmpTargetAddrTable are created and
+         deleted using the snmpTargetAddrRowStatus object."
+    INDEX { IMPLIED snmpTargetAddrName }
+    ::= { snmpTargetAddrTable 1 }
+
+SnmpTargetAddrEntry ::= SEQUENCE {
+    snmpTargetAddrName         SnmpAdminString,
+    snmpTargetAddrTDomain      TDomain,
+    snmpTargetAddrTAddress     TAddress,
+    snmpTargetAddrTimeout      TimeInterval,
+    snmpTargetAddrRetryCount   Integer32,
+    snmpTargetAddrTagList      SnmpTagList,
+    snmpTargetAddrParams       SnmpAdminString,
+    snmpTargetAddrStorageType  StorageType,
+    snmpTargetAddrRowStatus    RowStatus
+}
+
+snmpTargetAddrName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this snmpTargetAddrEntry."
+    ::= { snmpTargetAddrEntry 1 }
+
+snmpTargetAddrTDomain OBJECT-TYPE
+    SYNTAX      TDomain
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the transport type of the address
+         contained in the snmpTargetAddrTAddress object."
+    ::= { snmpTargetAddrEntry 2 }
+
+snmpTargetAddrTAddress OBJECT-TYPE
+    SYNTAX      TAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains a transport address.  The format of
+         this address depends on the value of the
+         snmpTargetAddrTDomain object."
+    ::= { snmpTargetAddrEntry 3 }
+
+snmpTargetAddrTimeout OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object should reflect the expected maximum round
+         trip time for communicating with the transport address
+         defined by this row.  When a message is sent to this
+         address, and a response (if one is expected) is not
+         received within this time period, an implementation
+         may assume that the response will not be delivered.
+
+         Note that the time interval that an application waits
+         for a response may actually be derived from the value
+         of this object.  The method for deriving the actual time
+         interval is implementation dependent.  One such method
+         is to derive the expected round trip time based on a
+         particular retransmission algorithm and on the number
+         of timeouts which have occurred.  The type of message may
+         also be considered when deriving expected round trip
+         times for retransmissions.  For example, if a message is
+         being sent with a securityLevel that indicates both
+
+         authentication and privacy, the derived value may be
+         increased to compensate for extra processing time spent
+         during authentication and encryption processing."
+    DEFVAL { 1500 }
+    ::= { snmpTargetAddrEntry 4 }
+
+snmpTargetAddrRetryCount OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object specifies a default number of retries to be
+         attempted when a response is not received for a generated
+         message.  An application may provide its own retry count,
+         in which case the value of this object is ignored."
+    DEFVAL { 3 }
+    ::= { snmpTargetAddrEntry 5 }
+
+snmpTargetAddrTagList OBJECT-TYPE
+    SYNTAX      SnmpTagList
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object contains a list of tag values which are
+         used to select target addresses for a particular
+         operation."
+    DEFVAL { "" }
+    ::= { snmpTargetAddrEntry 6 }
+
+snmpTargetAddrParams OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of this object identifies an entry in the
+         snmpTargetParamsTable.  The identified entry
+         contains SNMP parameters to be used when generating
+         messages to be sent to this transport address."
+    ::= { snmpTargetAddrEntry 7 }
+
+snmpTargetAddrStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpTargetAddrEntry 8 }
+
+snmpTargetAddrRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5).
+
+         Until instances of all corresponding columns are
+         appropriately configured, the value of the
+         corresponding instance of the snmpTargetAddrRowStatus
+         column is 'notReady'.
+
+         In particular, a newly created row cannot be made
+         active until the corresponding instances of
+         snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
+         snmpTargetAddrParams have all been set.
+
+         The following objects may not be modified while the
+         value of this object is active(1):
+             - snmpTargetAddrTDomain
+             - snmpTargetAddrTAddress
+         An attempt to set these objects while the value of
+         snmpTargetAddrRowStatus is active(1) will result in
+         an inconsistentValue error."
+    ::= { snmpTargetAddrEntry 9 }
+
+snmpTargetParamsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SnmpTargetParamsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of SNMP target information to be used
+         in the generation of SNMP messages."
+    ::= { snmpTargetObjects 3 }
+
+snmpTargetParamsEntry OBJECT-TYPE
+    SYNTAX      SnmpTargetParamsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A set of SNMP target information.
+
+         Entries in the snmpTargetParamsTable are created and
+         deleted using the snmpTargetParamsRowStatus object."
+    INDEX { IMPLIED snmpTargetParamsName }
+    ::= { snmpTargetParamsTable 1 }
+
+SnmpTargetParamsEntry ::= SEQUENCE {
+    snmpTargetParamsName           SnmpAdminString,
+    snmpTargetParamsMPModel        SnmpMessageProcessingModel,
+    snmpTargetParamsSecurityModel  SnmpSecurityModel,
+    snmpTargetParamsSecurityName   SnmpAdminString,
+    snmpTargetParamsSecurityLevel  SnmpSecurityLevel,
+    snmpTargetParamsStorageType    StorageType,
+    snmpTargetParamsRowStatus      RowStatus
+}
+
+snmpTargetParamsName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The locally arbitrary, but unique identifier associated
+         with this snmpTargetParamsEntry."
+    ::= { snmpTargetParamsEntry 1 }
+
+snmpTargetParamsMPModel OBJECT-TYPE
+    SYNTAX      SnmpMessageProcessingModel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Message Processing Model to be used when generating
+         SNMP messages using this entry."
+    ::= { snmpTargetParamsEntry 2 }
+
+snmpTargetParamsSecurityModel OBJECT-TYPE
+    SYNTAX      SnmpSecurityModel (1..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Security Model to be used when generating SNMP
+          messages using this entry.  An implementation may
+          choose to return an inconsistentValue error if an
+          attempt is made to set this variable to a value
+          for a security model which the implementation does
+          not support."
+    ::= { snmpTargetParamsEntry 3 }
+
+snmpTargetParamsSecurityName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The securityName which identifies the Principal on
+         whose behalf SNMP messages will be generated using
+         this entry."
+    ::= { snmpTargetParamsEntry 4 }
+
+snmpTargetParamsSecurityLevel OBJECT-TYPE
+    SYNTAX      SnmpSecurityLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Level of Security to be used when generating
+         SNMP messages using this entry."
+    ::= { snmpTargetParamsEntry 5 }
+
+snmpTargetParamsStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { snmpTargetParamsEntry 6 }
+
+snmpTargetParamsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this conceptual row.
+
+         To create a row in this table, a manager must
+         set this object to either createAndGo(4) or
+         createAndWait(5).
+
+         Until instances of all corresponding columns are
+         appropriately configured, the value of the
+         corresponding instance of the snmpTargetParamsRowStatus
+         column is 'notReady'.
+
+         In particular, a newly created row cannot be made
+         active until the corresponding
+         snmpTargetParamsMPModel,
+         snmpTargetParamsSecurityModel,
+         snmpTargetParamsSecurityName,
+         and snmpTargetParamsSecurityLevel have all been set.
+
+         The following objects may not be modified while the
+         value of this object is active(1):
+             - snmpTargetParamsMPModel
+             - snmpTargetParamsSecurityModel
+             - snmpTargetParamsSecurityName
+             - snmpTargetParamsSecurityLevel
+         An attempt to set these objects while the value of
+         snmpTargetParamsRowStatus is active(1) will result in
+         an inconsistentValue error."
+    ::= { snmpTargetParamsEntry 7 }
+
+snmpUnavailableContexts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The total number of packets received by the SNMP
+         engine which were dropped because the context
+         contained in the message was unavailable."
+    ::= { snmpTargetObjects 4 }
+
+snmpUnknownContexts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The total number of packets received by the SNMP
+         engine which were dropped because the context
+         contained in the message was unknown."
+    ::= { snmpTargetObjects 5 }
+
+--
+--
+-- Conformance information
+--
+--
+
+snmpTargetCompliances OBJECT IDENTIFIER ::=
+                                        { snmpTargetConformance 1 }
+snmpTargetGroups      OBJECT IDENTIFIER ::=
+                                        { snmpTargetConformance 2 }
+
+--
+--
+-- Compliance statements
+
+--
+--
+
+snmpTargetCommandResponderCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which include
+         a command responder application."
+    MODULE -- This Module
+        MANDATORY-GROUPS { snmpTargetCommandResponderGroup }
+    ::= { snmpTargetCompliances 1 }
+
+snmpTargetBasicGroup OBJECT-GROUP
+    OBJECTS {
+        snmpTargetSpinLock,
+        snmpTargetAddrTDomain,
+        snmpTargetAddrTAddress,
+        snmpTargetAddrTagList,
+        snmpTargetAddrParams,
+        snmpTargetAddrStorageType,
+        snmpTargetAddrRowStatus,
+        snmpTargetParamsMPModel,
+        snmpTargetParamsSecurityModel,
+        snmpTargetParamsSecurityName,
+        snmpTargetParamsSecurityLevel,
+        snmpTargetParamsStorageType,
+        snmpTargetParamsRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing basic remote
+         configuration of management targets."
+    ::= { snmpTargetGroups 1 }
+
+snmpTargetResponseGroup OBJECT-GROUP
+    OBJECTS {
+        snmpTargetAddrTimeout,
+        snmpTargetAddrRetryCount
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing remote configuration
+         of management targets for applications which generate
+         SNMP messages for which a response message would be
+         expected."
+    ::= { snmpTargetGroups 2 }
+
+snmpTargetCommandResponderGroup OBJECT-GROUP
+
+    OBJECTS {
+        snmpUnavailableContexts,
+        snmpUnknownContexts
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects required for command responder
+         applications, used for counting error conditions."
+    ::= { snmpTargetGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-TSM-MIB.mib b/snmp_builder/mibs/SNMP-TSM-MIB.mib
new file mode 100644
index 0000000..4ccf09b
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-TSM-MIB.mib
@@ -0,0 +1,234 @@
+SNMP-TSM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    mib-2, Counter32
+      FROM SNMPv2-SMI -- RFC2578
+    MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF -- RFC2580
+    TruthValue
+       FROM SNMPv2-TC -- RFC2579
+    ;
+
+snmpTsmMIB MODULE-IDENTITY
+    LAST-UPDATED "200906090000Z"
+    ORGANIZATION "ISMS Working Group"
+    CONTACT-INFO "WG-EMail:   isms@lists.ietf.org
+                  Subscribe:  isms-request@lists.ietf.org
+
+                  Chairs:
+                    Juergen Quittek
+                    NEC Europe Ltd.
+                    Network Laboratories
+                    Kurfuersten-Anlage 36
+                    69115 Heidelberg
+                    Germany
+                    +49 6221 90511-15
+                    quittek@netlab.nec.de
+
+                    Juergen Schoenwaelder
+                    Jacobs University Bremen
+                    Campus Ring 1
+                    28725 Bremen
+                    Germany
+                    +49 421 200-3587
+                    j.schoenwaelder@jacobs-university.de
+
+                  Editor:
+                    David Harrington
+                    Huawei Technologies USA
+                    1700 Alma Dr.
+                    Plano TX 75075
+                    USA
+                    +1 603-436-8634
+                    ietfdbh@comcast.net
+
+                    Wes Hardaker
+                    Cobham Analytic Solutions
+                    P.O. Box 382
+                    Davis, CA  95617
+                    USA
+                    +1 530 792 1913
+                    ietf@hardakers.net
+                 "
+    DESCRIPTION
+       "The Transport Security Model MIB.
+
+        In keeping with the RFC 3411 design decisions to use
+        self-contained documents, the RFC that contains the definition
+        of this MIB module also includes the elements of procedure
+        that are needed for processing the Transport Security Model
+        for SNMP.  These MIB objects SHOULD NOT be modified via other
+        subsystems or models defined in other documents.  This allows
+        the Transport Security Model for SNMP to be designed and
+        documented as independent and self-contained, having no direct
+        impact on other modules, and this allows this module to be
+        upgraded and supplemented as the need arises, and to move
+        along the standards track on different time-lines from other
+        modules.
+
+        Copyright (c) 2009 IETF Trust and the persons
+        identified as authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, are permitted provided that the
+        following conditions are met:
+
+        - Redistributions of source code must retain the above copyright
+          notice, this list of conditions and the following disclaimer.
+
+        - Redistributions in binary form must reproduce the above
+          copyright notice, this list of conditions and the following
+          disclaimer in the documentation and/or other materials
+          provided with the distribution.
+
+        - Neither the name of Internet Society, IETF or IETF Trust,
+          nor the names of specific contributors, may be used to endorse
+          or promote products derived from this software without
+          specific prior written permission.
+
+        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+        CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+        INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+        MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+        DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+        CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+        SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+        NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+        LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+        HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+        CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+        OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+        EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+        This version of this MIB module is part of RFC 5591;
+        see the RFC itself for full legal notices."
+
+    REVISION    "200906090000Z"
+    DESCRIPTION "The initial version, published in RFC 5591."
+    ::= { mib-2 190 }
+
+-- ---------------------------------------------------------- --
+-- subtrees in the SNMP-TSM-MIB
+-- ---------------------------------------------------------- --
+
+snmpTsmNotifications OBJECT IDENTIFIER ::= { snmpTsmMIB 0 }
+snmpTsmMIBObjects    OBJECT IDENTIFIER ::= { snmpTsmMIB 1 }
+snmpTsmConformance   OBJECT IDENTIFIER ::= { snmpTsmMIB 2 }
+
+-- -------------------------------------------------------------
+-- Objects
+-- -------------------------------------------------------------
+
+-- Statistics for the Transport Security Model
+
+snmpTsmStats         OBJECT IDENTIFIER ::= { snmpTsmMIBObjects 1 }
+
+snmpTsmInvalidCaches OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of incoming messages dropped because the
+
+                 tmStateReference referred to an invalid cache.
+                "
+    ::= { snmpTsmStats 1 }
+
+snmpTsmInadequateSecurityLevels OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of incoming messages dropped because
+                 the securityLevel asserted by the Transport Model was
+                 less than the securityLevel requested by the
+                 application.
+                "
+    ::= { snmpTsmStats 2 }
+
+snmpTsmUnknownPrefixes OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of messages dropped because
+                 snmpTsmConfigurationUsePrefix was set to true and
+                 there is no known prefix for the specified transport
+                 domain.
+                "
+    ::= { snmpTsmStats 3 }
+
+snmpTsmInvalidPrefixes OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of messages dropped because
+                 the securityName associated with an outgoing message
+                 did not contain a valid transport domain prefix.
+                "
+    ::= { snmpTsmStats 4 }
+
+-- -------------------------------------------------------------
+-- Configuration
+-- -------------------------------------------------------------
+
+-- Configuration for the Transport Security Model
+
+snmpTsmConfiguration   OBJECT IDENTIFIER ::= { snmpTsmMIBObjects 2 }
+
+snmpTsmConfigurationUsePrefix OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION "If this object is set to true, then securityNames
+                 passing to and from the application are expected to
+                 contain a transport-domain-specific prefix.  If this
+                 object is set to true, then a domain-specific prefix
+                 will be added by the TSM to the securityName for
+                 incoming messages and removed from the securityName
+                 when processing outgoing messages.  Transport domains
+                 and prefixes are maintained in a registry by IANA.
+                 This object SHOULD persist across system reboots.
+                "
+    DEFVAL { false }
+    ::= { snmpTsmConfiguration 1 }
+
+-- -------------------------------------------------------------
+-- snmpTsmMIB - Conformance Information
+-- -------------------------------------------------------------
+
+snmpTsmCompliances OBJECT IDENTIFIER ::= { snmpTsmConformance 1 }
+
+snmpTsmGroups      OBJECT IDENTIFIER ::= { snmpTsmConformance 2 }
+
+-- -------------------------------------------------------------
+-- Compliance statements
+-- -------------------------------------------------------------
+
+snmpTsmCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION "The compliance statement for SNMP engines that support
+                 the SNMP-TSM-MIB.
+                "
+    MODULE
+        MANDATORY-GROUPS { snmpTsmGroup }
+    ::= { snmpTsmCompliances 1 }
+
+-- -------------------------------------------------------------
+-- Units of conformance
+-- -------------------------------------------------------------
+snmpTsmGroup OBJECT-GROUP
+    OBJECTS {
+        snmpTsmInvalidCaches,
+        snmpTsmInadequateSecurityLevels,
+        snmpTsmUnknownPrefixes,
+        snmpTsmInvalidPrefixes,
+        snmpTsmConfigurationUsePrefix
+    }
+    STATUS      current
+    DESCRIPTION "A collection of objects for maintaining
+                 information of an SNMP engine that implements
+
+                 the SNMP Transport Security Model.
+                "
+    ::= { snmpTsmGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-USER-BASED-SM-MIB.mib b/snmp_builder/mibs/SNMP-USER-BASED-SM-MIB.mib
new file mode 100644
index 0000000..3b71403
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-USER-BASED-SM-MIB.mib
@@ -0,0 +1,912 @@
+SNMP-USER-BASED-SM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    OBJECT-IDENTITY,
+    snmpModules, Counter32                FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, TestAndIncr,
+    RowStatus, RowPointer,
+    StorageType, AutonomousType           FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP       FROM SNMPv2-CONF
+    SnmpAdminString, SnmpEngineID,
+    snmpAuthProtocols, snmpPrivProtocols  FROM SNMP-FRAMEWORK-MIB;
+
+snmpUsmMIB MODULE-IDENTITY
+    LAST-UPDATED "200210160000Z"            -- 16 Oct 2002, midnight
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-email:   snmpv3@lists.tislabs.com
+                  Subscribe:  majordomo@lists.tislabs.com
+                              In msg body:  subscribe snmpv3
+
+                  Chair:      Russ Mundy
+                              Network Associates Laboratories
+                  postal:     15204 Omega Drive, Suite 300
+                              Rockville, MD 20850-4601
+                              USA
+                  email:      mundy@tislabs.com
+
+                  phone:      +1 301-947-7107
+
+                  Co-Chair:   David Harrington
+                              Enterasys Networks
+                  Postal:     35 Industrial Way
+                              P. O. Box 5004
+                              Rochester, New Hampshire 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  Phone:      +1 603-337-2614
+
+                  Co-editor   Uri Blumenthal
+                              Lucent Technologies
+                  postal:     67 Whippany Rd.
+                              Whippany, NJ 07981
+                              USA
+                  email:      uri@lucent.com
+                  phone:      +1-973-386-2163
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+                  email:      bwijnen@lucent.com
+                  phone:      +31-348-480-685
+                 "
+    DESCRIPTION  "The management information definitions for the
+                  SNMP User-based Security Model.
+
+                  Copyright (C) The Internet Society (2002). This
+                  version of this MIB module is part of RFC 3414;
+                  see the RFC itself for full legal notices.
+                 "
+--  Revision history
+
+    REVISION     "200210160000Z"          -- 16 Oct 2002, midnight
+    DESCRIPTION  "Changes in this revision:
+                  - Updated references and contact info.
+                  - Clarification to usmUserCloneFrom DESCRIPTION
+                    clause
+                  - Fixed 'command responder' into 'command generator'
+                    in last para of DESCRIPTION clause of
+                    usmUserTable.
+                  This revision published as RFC3414.
+                 "
+    REVISION     "199901200000Z"          -- 20 Jan 1999, midnight
+    DESCRIPTION  "Clarifications, published as RFC2574"
+
+    REVISION     "199711200000Z"          -- 20 Nov 1997, midnight
+    DESCRIPTION  "Initial version, published as RFC2274"
+    ::= { snmpModules 15 }
+
+-- Administrative assignments ****************************************
+
+usmMIBObjects     OBJECT IDENTIFIER ::= { snmpUsmMIB 1 }
+usmMIBConformance OBJECT IDENTIFIER ::= { snmpUsmMIB 2 }
+
+-- Identification of Authentication and Privacy Protocols ************
+
+usmNoAuthProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "No Authentication Protocol."
+    ::= { snmpAuthProtocols 1 }
+
+usmHMACMD5AuthProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The HMAC-MD5-96 Digest Authentication Protocol."
+    REFERENCE    "- H. Krawczyk, M. Bellare, R. Canetti HMAC:
+                    Keyed-Hashing for Message Authentication,
+                    RFC2104, Feb 1997.
+                  - Rivest, R., Message Digest Algorithm MD5, RFC1321.
+                 "
+    ::= { snmpAuthProtocols 2 }
+
+usmHMACSHAAuthProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The HMAC-SHA-96 Digest Authentication Protocol."
+    REFERENCE    "- H. Krawczyk, M. Bellare, R. Canetti, HMAC:
+                    Keyed-Hashing for Message Authentication,
+                    RFC2104, Feb 1997.
+                  - Secure Hash Algorithm. NIST FIPS 180-1.
+                 "
+    ::= { snmpAuthProtocols 3 }
+
+usmNoPrivProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "No Privacy Protocol."
+    ::= { snmpPrivProtocols 1 }
+
+usmDESPrivProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The CBC-DES Symmetric Encryption Protocol."
+    REFERENCE    "- Data Encryption Standard, National Institute of
+                    Standards and Technology.  Federal Information
+                    Processing Standard (FIPS) Publication 46-1.
+
+                    Supersedes FIPS Publication 46,
+                    (January, 1977; reaffirmed January, 1988).
+
+                  - Data Encryption Algorithm, American National
+                    Standards Institute.  ANSI X3.92-1981,
+                    (December, 1980).
+
+                  - DES Modes of Operation, National Institute of
+                    Standards and Technology.  Federal Information
+                    Processing Standard (FIPS) Publication 81,
+                    (December, 1980).
+
+                  - Data Encryption Algorithm - Modes of Operation,
+                    American National Standards Institute.
+                    ANSI X3.106-1983, (May 1983).
+                 "
+    ::= { snmpPrivProtocols 2 }
+
+-- Textual Conventions ***********************************************
+
+KeyChange ::=     TEXTUAL-CONVENTION
+   STATUS         current
+   DESCRIPTION
+         "Every definition of an object with this syntax must identify
+          a protocol P, a secret key K, and a hash algorithm H
+          that produces output of L octets.
+
+          The object's value is a manager-generated, partially-random
+          value which, when modified, causes the value of the secret
+          key K, to be modified via a one-way function.
+
+          The value of an instance of this object is the concatenation
+          of two components: first a 'random' component and then a
+          'delta' component.
+
+          The lengths of the random and delta components
+          are given by the corresponding value of the protocol P;
+          if P requires K to be a fixed length, the length of both the
+          random and delta components is that fixed length; if P
+          allows the length of K to be variable up to a particular
+          maximum length, the length of the random component is that
+          maximum length and the length of the delta component is any
+          length less than or equal to that maximum length.
+          For example, usmHMACMD5AuthProtocol requires K to be a fixed
+          length of 16 octets and L - of 16 octets.
+          usmHMACSHAAuthProtocol requires K to be a fixed length of
+          20 octets and L - of 20 octets. Other protocols may define
+          other sizes, as deemed appropriate.
+
+          When a requester wants to change the old key K to a new
+          key keyNew on a remote entity, the 'random' component is
+          obtained from either a true random generator, or from a
+          pseudorandom generator, and the 'delta' component is
+          computed as follows:
+
+           - a temporary variable is initialized to the existing value
+             of K;
+           - if the length of the keyNew is greater than L octets,
+             then:
+              - the random component is appended to the value of the
+                temporary variable, and the result is input to the
+                the hash algorithm H to produce a digest value, and
+                the temporary variable is set to this digest value;
+              - the value of the temporary variable is XOR-ed with
+                the first (next) L-octets (16 octets in case of MD5)
+                of the keyNew to produce the first (next) L-octets
+                (16 octets in case of MD5) of the 'delta' component.
+              - the above two steps are repeated until the unused
+                portion of the keyNew component is L octets or less,
+           - the random component is appended to the value of the
+             temporary variable, and the result is input to the
+             hash algorithm H to produce a digest value;
+           - this digest value, truncated if necessary to be the same
+             length as the unused portion of the keyNew, is XOR-ed
+             with the unused portion of the keyNew to produce the
+             (final portion of the) 'delta' component.
+
+           For example, using MD5 as the hash algorithm H:
+
+              iterations = (lenOfDelta - 1)/16; /* integer division */
+              temp = keyOld;
+              for (i = 0; i < iterations; i++) {
+                  temp = MD5 (temp || random);
+                  delta[i*16 .. (i*16)+15] =
+                         temp XOR keyNew[i*16 .. (i*16)+15];
+              }
+              temp = MD5 (temp || random);
+              delta[i*16 .. lenOfDelta-1] =
+                     temp XOR keyNew[i*16 .. lenOfDelta-1];
+
+          The 'random' and 'delta' components are then concatenated as
+          described above, and the resulting octet string is sent to
+          the recipient as the new value of an instance of this object.
+
+          At the receiver side, when an instance of this object is set
+          to a new value, then a new value of K is computed as follows:
+
+           - a temporary variable is initialized to the existing value
+             of K;
+           - if the length of the delta component is greater than L
+             octets, then:
+              - the random component is appended to the value of the
+                temporary variable, and the result is input to the
+                hash algorithm H to produce a digest value, and the
+                temporary variable is set to this digest value;
+              - the value of the temporary variable is XOR-ed with
+                the first (next) L-octets (16 octets in case of MD5)
+                of the delta component to produce the first (next)
+                L-octets (16 octets in case of MD5) of the new value
+                of K.
+              - the above two steps are repeated until the unused
+                portion of the delta component is L octets or less,
+           - the random component is appended to the value of the
+             temporary variable, and the result is input to the
+             hash algorithm H to produce a digest value;
+           - this digest value, truncated if necessary to be the same
+             length as the unused portion of the delta component, is
+             XOR-ed with the unused portion of the delta component to
+             produce the (final portion of the) new value of K.
+
+           For example, using MD5 as the hash algorithm H:
+
+              iterations = (lenOfDelta - 1)/16; /* integer division */
+              temp = keyOld;
+              for (i = 0; i < iterations; i++) {
+                  temp = MD5 (temp || random);
+                  keyNew[i*16 .. (i*16)+15] =
+                         temp XOR delta[i*16 .. (i*16)+15];
+              }
+              temp = MD5 (temp || random);
+              keyNew[i*16 .. lenOfDelta-1] =
+                     temp XOR delta[i*16 .. lenOfDelta-1];
+
+          The value of an object with this syntax, whenever it is
+          retrieved by the management protocol, is always the zero
+          length string.
+
+          Note that the keyOld and keyNew are the localized keys.
+
+          Note that it is probably wise that when an SNMP entity sends
+          a SetRequest to change a key, that it keeps a copy of the old
+          key until it has confirmed that the key change actually
+          succeeded.
+         "
+    SYNTAX       OCTET STRING
+
+-- Statistics for the User-based Security Model **********************
+
+usmStats         OBJECT IDENTIFIER ::= { usmMIBObjects 1 }
+
+usmStatsUnsupportedSecLevels OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they requested a
+                 securityLevel that was unknown to the SNMP engine
+                 or otherwise unavailable.
+                "
+    ::= { usmStats 1 }
+
+usmStatsNotInTimeWindows OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they appeared
+                 outside of the authoritative SNMP engine's window.
+                "
+    ::= { usmStats 2 }
+
+usmStatsUnknownUserNames OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they referenced a
+                 user that was not known to the SNMP engine.
+                "
+    ::= { usmStats 3 }
+
+usmStatsUnknownEngineIDs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they referenced an
+                 snmpEngineID that was not known to the SNMP engine.
+                "
+    ::= { usmStats 4 }
+
+usmStatsWrongDigests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they didn't
+                 contain the expected digest value.
+                "
+    ::= { usmStats 5 }
+
+usmStatsDecryptionErrors OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they could not be
+                 decrypted.
+                "
+    ::= { usmStats 6 }
+
+-- The usmUser Group ************************************************
+
+usmUser          OBJECT IDENTIFIER ::= { usmMIBObjects 2 }
+
+usmUserSpinLock  OBJECT-TYPE
+    SYNTAX       TestAndIncr
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "An advisory lock used to allow several cooperating
+                 Command Generator Applications to coordinate their
+                 use of facilities to alter secrets in the
+                 usmUserTable.
+                "
+    ::= { usmUser 1 }
+
+-- The table of valid users for the User-based Security Model ********
+
+usmUserTable     OBJECT-TYPE
+    SYNTAX       SEQUENCE OF UsmUserEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The table of users configured in the SNMP engine's
+                 Local Configuration Datastore (LCD).
+
+                 To create a new user (i.e., to instantiate a new
+                 conceptual row in this table), it is recommended to
+                 follow this procedure:
+
+                   1)  GET(usmUserSpinLock.0) and save in sValue.
+
+                   2)  SET(usmUserSpinLock.0=sValue,
+                           usmUserCloneFrom=templateUser,
+                           usmUserStatus=createAndWait)
+                       You should use a template user to clone from
+                       which has the proper auth/priv protocol defined.
+
+                 If the new user is to use privacy:
+
+                   3)  generate the keyChange value based on the secret
+                       privKey of the clone-from user and the secret key
+                       to be used for the new user. Let us call this
+                       pkcValue.
+                   4)  GET(usmUserSpinLock.0) and save in sValue.
+                   5)  SET(usmUserSpinLock.0=sValue,
+                           usmUserPrivKeyChange=pkcValue
+                           usmUserPublic=randomValue1)
+                   6)  GET(usmUserPulic) and check it has randomValue1.
+                       If not, repeat steps 4-6.
+
+                 If the new user will never use privacy:
+
+                   7)  SET(usmUserPrivProtocol=usmNoPrivProtocol)
+
+                 If the new user is to use authentication:
+
+                   8)  generate the keyChange value based on the secret
+                       authKey of the clone-from user and the secret key
+                       to be used for the new user. Let us call this
+                       akcValue.
+                   9)  GET(usmUserSpinLock.0) and save in sValue.
+                   10) SET(usmUserSpinLock.0=sValue,
+                           usmUserAuthKeyChange=akcValue
+                           usmUserPublic=randomValue2)
+                   11) GET(usmUserPulic) and check it has randomValue2.
+                       If not, repeat steps 9-11.
+
+                 If the new user will never use authentication:
+
+                   12) SET(usmUserAuthProtocol=usmNoAuthProtocol)
+
+                 Finally, activate the new user:
+
+                   13) SET(usmUserStatus=active)
+
+                 The new user should now be available and ready to be
+                 used for SNMPv3 communication. Note however that access
+                 to MIB data must be provided via configuration of the
+                 SNMP-VIEW-BASED-ACM-MIB.
+
+                 The use of usmUserSpinlock is to avoid conflicts with
+                 another SNMP command generator application which may
+                 also be acting on the usmUserTable.
+                "
+    ::= { usmUser 2 }
+
+usmUserEntry     OBJECT-TYPE
+    SYNTAX       UsmUserEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A user configured in the SNMP engine's Local
+                 Configuration Datastore (LCD) for the User-based
+                 Security Model.
+                "
+    INDEX       { usmUserEngineID,
+                  usmUserName
+                }
+    ::= { usmUserTable 1 }
+
+UsmUserEntry ::= SEQUENCE
+    {
+        usmUserEngineID         SnmpEngineID,
+        usmUserName             SnmpAdminString,
+        usmUserSecurityName     SnmpAdminString,
+        usmUserCloneFrom        RowPointer,
+        usmUserAuthProtocol     AutonomousType,
+        usmUserAuthKeyChange    KeyChange,
+        usmUserOwnAuthKeyChange KeyChange,
+        usmUserPrivProtocol     AutonomousType,
+        usmUserPrivKeyChange    KeyChange,
+        usmUserOwnPrivKeyChange KeyChange,
+        usmUserPublic           OCTET STRING,
+        usmUserStorageType      StorageType,
+        usmUserStatus           RowStatus
+    }
+
+usmUserEngineID  OBJECT-TYPE
+    SYNTAX       SnmpEngineID
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An SNMP engine's administratively-unique identifier.
+
+                 In a simple agent, this value is always that agent's
+                 own snmpEngineID value.
+
+                 The value can also take the value of the snmpEngineID
+                 of a remote SNMP engine with which this user can
+                 communicate.
+                "
+    ::= { usmUserEntry 1 }
+
+usmUserName      OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A human readable string representing the name of
+                 the user.
+
+                 This is the (User-based Security) Model dependent
+                 security ID.
+                "
+    ::= { usmUserEntry 2 }
+
+usmUserSecurityName OBJECT-TYPE
+    SYNTAX       SnmpAdminString
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "A human readable string representing the user in
+                 Security Model independent format.
+
+                 The default transformation of the User-based Security
+                 Model dependent security ID to the securityName and
+                 vice versa is the identity function so that the
+                 securityName is the same as the userName.
+                "
+    ::= { usmUserEntry 3 }
+
+usmUserCloneFrom OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "A pointer to another conceptual row in this
+                 usmUserTable.  The user in this other conceptual
+                 row is called the clone-from user.
+
+                 When a new user is created (i.e., a new conceptual
+                 row is instantiated in this table), the privacy and
+                 authentication parameters of the new user must be
+                 cloned from its clone-from user. These parameters are:
+                   - authentication protocol (usmUserAuthProtocol)
+                   - privacy protocol (usmUserPrivProtocol)
+                 They will be copied regardless of what the current
+                 value is.
+
+                 Cloning also causes the initial values of the secret
+                 authentication key (authKey) and the secret encryption
+
+                 key (privKey) of the new user to be set to the same
+                 values as the corresponding secrets of the clone-from
+                 user to allow the KeyChange process to occur as
+                 required during user creation.
+
+                 The first time an instance of this object is set by
+                 a management operation (either at or after its
+                 instantiation), the cloning process is invoked.
+                 Subsequent writes are successful but invoke no
+                 action to be taken by the receiver.
+                 The cloning process fails with an 'inconsistentName'
+                 error if the conceptual row representing the
+                 clone-from user does not exist or is not in an active
+                 state when the cloning process is invoked.
+
+                 When this object is read, the ZeroDotZero OID
+                 is returned.
+                "
+    ::= { usmUserEntry 4 }
+
+usmUserAuthProtocol OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An indication of whether messages sent on behalf of
+                 this user to/from the SNMP engine identified by
+                 usmUserEngineID, can be authenticated, and if so,
+                 the type of authentication protocol which is used.
+
+                 An instance of this object is created concurrently
+                 with the creation of any other object instance for
+                 the same user (i.e., as part of the processing of
+                 the set operation which creates the first object
+                 instance in the same conceptual row).
+
+                 If an initial set operation (i.e. at row creation time)
+                 tries to set a value for an unknown or unsupported
+                 protocol, then a 'wrongValue' error must be returned.
+
+                 The value will be overwritten/set when a set operation
+                 is performed on the corresponding instance of
+                 usmUserCloneFrom.
+
+                 Once instantiated, the value of such an instance of
+                 this object can only be changed via a set operation to
+                 the value of the usmNoAuthProtocol.
+
+                 If a set operation tries to change the value of an
+
+                 existing instance of this object to any value other
+                 than usmNoAuthProtocol, then an 'inconsistentValue'
+                 error must be returned.
+
+                 If a set operation tries to set the value to the
+                 usmNoAuthProtocol while the usmUserPrivProtocol value
+                 in the same row is not equal to usmNoPrivProtocol,
+                 then an 'inconsistentValue' error must be returned.
+                 That means that an SNMP command generator application
+                 must first ensure that the usmUserPrivProtocol is set
+                 to the usmNoPrivProtocol value before it can set
+                 the usmUserAuthProtocol value to usmNoAuthProtocol.
+                "
+    DEFVAL      { usmNoAuthProtocol }
+    ::= { usmUserEntry 5 }
+
+usmUserAuthKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange   -- typically (SIZE (0 | 32)) for HMACMD5
+                             -- typically (SIZE (0 | 40)) for HMACSHA
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An object, which when modified, causes the secret
+                 authentication key used for messages sent on behalf
+                 of this user to/from the SNMP engine identified by
+                 usmUserEngineID, to be modified via a one-way
+                 function.
+
+                 The associated protocol is the usmUserAuthProtocol.
+                 The associated secret key is the user's secret
+                 authentication key (authKey). The associated hash
+                 algorithm is the algorithm used by the user's
+                 usmUserAuthProtocol.
+
+                 When creating a new user, it is an 'inconsistentName'
+                 error for a set operation to refer to this object
+                 unless it is previously or concurrently initialized
+                 through a set operation on the corresponding instance
+                 of usmUserCloneFrom.
+
+                 When the value of the corresponding usmUserAuthProtocol
+                 is usmNoAuthProtocol, then a set is successful, but
+                 effectively is a no-op.
+
+                 When this object is read, the zero-length (empty)
+                 string is returned.
+
+                 The recommended way to do a key change is as follows:
+
+                   1) GET(usmUserSpinLock.0) and save in sValue.
+                   2) generate the keyChange value based on the old
+                      (existing) secret key and the new secret key,
+                      let us call this kcValue.
+
+                 If you do the key change on behalf of another user:
+
+                   3) SET(usmUserSpinLock.0=sValue,
+                          usmUserAuthKeyChange=kcValue
+                          usmUserPublic=randomValue)
+
+                 If you do the key change for yourself:
+
+                   4) SET(usmUserSpinLock.0=sValue,
+                          usmUserOwnAuthKeyChange=kcValue
+                          usmUserPublic=randomValue)
+
+                 If you get a response with error-status of noError,
+                 then the SET succeeded and the new key is active.
+                 If you do not get a response, then you can issue a
+                 GET(usmUserPublic) and check if the value is equal
+                 to the randomValue you did send in the SET. If so, then
+                 the key change succeeded and the new key is active
+                 (probably the response got lost). If not, then the SET
+                 request probably never reached the target and so you
+                 can start over with the procedure above.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 6 }
+
+usmUserOwnAuthKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange   -- typically (SIZE (0 | 32)) for HMACMD5
+                             -- typically (SIZE (0 | 40)) for HMACSHA
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Behaves exactly as usmUserAuthKeyChange, with one
+                 notable difference: in order for the set operation
+                 to succeed, the usmUserName of the operation
+                 requester must match the usmUserName that
+                 indexes the row which is targeted by this
+                 operation.
+                 In addition, the USM security model must be
+                 used for this operation.
+
+                 The idea here is that access to this column can be
+                 public, since it will only allow a user to change
+                 his own secret authentication key (authKey).
+                 Note that this can only be done once the row is active.
+
+                 When a set is received and the usmUserName of the
+                 requester is not the same as the umsUserName that
+                 indexes the row which is targeted by this operation,
+                 then a 'noAccess' error must be returned.
+
+                 When a set is received and the security model in use
+                 is not USM, then a 'noAccess' error must be returned.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 7 }
+
+usmUserPrivProtocol OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An indication of whether messages sent on behalf of
+                 this user to/from the SNMP engine identified by
+                 usmUserEngineID, can be protected from disclosure,
+                 and if so, the type of privacy protocol which is used.
+
+                 An instance of this object is created concurrently
+                 with the creation of any other object instance for
+                 the same user (i.e., as part of the processing of
+                 the set operation which creates the first object
+                 instance in the same conceptual row).
+
+                 If an initial set operation (i.e. at row creation time)
+                 tries to set a value for an unknown or unsupported
+                 protocol, then a 'wrongValue' error must be returned.
+
+                 The value will be overwritten/set when a set operation
+                 is performed on the corresponding instance of
+                 usmUserCloneFrom.
+
+                 Once instantiated, the value of such an instance of
+                 this object can only be changed via a set operation to
+                 the value of the usmNoPrivProtocol.
+
+                 If a set operation tries to change the value of an
+                 existing instance of this object to any value other
+                 than usmNoPrivProtocol, then an 'inconsistentValue'
+                 error must be returned.
+
+                 Note that if any privacy protocol is used, then you
+                 must also use an authentication protocol. In other
+                 words, if usmUserPrivProtocol is set to anything else
+                 than usmNoPrivProtocol, then the corresponding instance
+                 of usmUserAuthProtocol cannot have a value of
+
+                 usmNoAuthProtocol. If it does, then an
+                 'inconsistentValue' error must be returned.
+                "
+    DEFVAL      { usmNoPrivProtocol }
+    ::= { usmUserEntry 8 }
+
+usmUserPrivKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange  -- typically (SIZE (0 | 32)) for DES
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An object, which when modified, causes the secret
+                 encryption key used for messages sent on behalf
+                 of this user to/from the SNMP engine identified by
+                 usmUserEngineID, to be modified via a one-way
+                 function.
+
+                 The associated protocol is the usmUserPrivProtocol.
+                 The associated secret key is the user's secret
+                 privacy key (privKey). The associated hash
+                 algorithm is the algorithm used by the user's
+                 usmUserAuthProtocol.
+
+                 When creating a new user, it is an 'inconsistentName'
+                 error for a set operation to refer to this object
+                 unless it is previously or concurrently initialized
+                 through a set operation on the corresponding instance
+                 of usmUserCloneFrom.
+
+                 When the value of the corresponding usmUserPrivProtocol
+                 is usmNoPrivProtocol, then a set is successful, but
+                 effectively is a no-op.
+
+                 When this object is read, the zero-length (empty)
+                 string is returned.
+                 See the description clause of usmUserAuthKeyChange for
+                 a recommended procedure to do a key change.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 9 }
+
+usmUserOwnPrivKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange  -- typically (SIZE (0 | 32)) for DES
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Behaves exactly as usmUserPrivKeyChange, with one
+                 notable difference: in order for the Set operation
+                 to succeed, the usmUserName of the operation
+                 requester must match the usmUserName that indexes
+
+                 the row which is targeted by this operation.
+                 In addition, the USM security model must be
+                 used for this operation.
+
+                 The idea here is that access to this column can be
+                 public, since it will only allow a user to change
+                 his own secret privacy key (privKey).
+                 Note that this can only be done once the row is active.
+
+                 When a set is received and the usmUserName of the
+                 requester is not the same as the umsUserName that
+                 indexes the row which is targeted by this operation,
+                 then a 'noAccess' error must be returned.
+
+                 When a set is received and the security model in use
+                 is not USM, then a 'noAccess' error must be returned.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 10 }
+
+usmUserPublic    OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "A publicly-readable value which can be written as part
+                 of the procedure for changing a user's secret
+                 authentication and/or privacy key, and later read to
+                 determine whether the change of the secret was
+                 effected.
+                "
+    DEFVAL      { ''H }  -- the empty string
+    ::= { usmUserEntry 11 }
+
+usmUserStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' must
+                 allow write-access at a minimum to:
+
+                 - usmUserAuthKeyChange, usmUserOwnAuthKeyChange
+                   and usmUserPublic for a user who employs
+                   authentication, and
+                 - usmUserPrivKeyChange, usmUserOwnPrivKeyChange
+                   and usmUserPublic for a user who employs
+                   privacy.
+
+                 Note that any user who employs authentication or
+                 privacy must allow its secret(s) to be updated and
+                 thus cannot be 'readOnly'.
+
+                 If an initial set operation tries to set the value to
+                 'readOnly' for a user who employs authentication or
+                 privacy, then an 'inconsistentValue' error must be
+                 returned.  Note that if the value has been previously
+                 set (implicit or explicit) to any value, then the rules
+                 as defined in the StorageType Textual Convention apply.
+
+                 It is an implementation issue to decide if a SET for
+                 a readOnly or permanent row is accepted at all. In some
+                 contexts this may make sense, in others it may not. If
+                 a SET for a readOnly or permanent row is not accepted
+                 at all, then a 'wrongValue' error must be returned.
+                "
+    DEFVAL      { nonVolatile }
+    ::= { usmUserEntry 12 }
+
+usmUserStatus    OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 Until instances of all corresponding columns are
+                 appropriately configured, the value of the
+                 corresponding instance of the usmUserStatus column
+                 is 'notReady'.
+
+                 In particular, a newly created row for a user who
+                 employs authentication, cannot be made active until the
+                 corresponding usmUserCloneFrom and usmUserAuthKeyChange
+                 have been set.
+
+                 Further, a newly created row for a user who also
+                 employs privacy, cannot be made active until the
+                 usmUserPrivKeyChange has been set.
+
+                 The RowStatus TC [RFC2579] requires that this
+                 DESCRIPTION clause states under which circumstances
+                 other objects in this row can be modified:
+
+                 The value of this object has no effect on whether
+                 other objects in this conceptual row can be modified,
+                 except for usmUserOwnAuthKeyChange and
+                 usmUserOwnPrivKeyChange. For these 2 objects, the
+
+                 value of usmUserStatus MUST be active.
+                "
+    ::= { usmUserEntry 13 }
+
+-- Conformance Information *******************************************
+
+usmMIBCompliances OBJECT IDENTIFIER ::= { usmMIBConformance 1 }
+usmMIBGroups      OBJECT IDENTIFIER ::= { usmMIBConformance 2 }
+
+-- Compliance statements
+
+usmMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "The compliance statement for SNMP engines which
+                 implement the SNMP-USER-BASED-SM-MIB.
+                "
+
+    MODULE       -- this module
+        MANDATORY-GROUPS { usmMIBBasicGroup }
+
+        OBJECT           usmUserAuthProtocol
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           usmUserPrivProtocol
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+    ::= { usmMIBCompliances 1 }
+
+-- Units of compliance
+usmMIBBasicGroup OBJECT-GROUP
+    OBJECTS     {
+                  usmStatsUnsupportedSecLevels,
+                  usmStatsNotInTimeWindows,
+                  usmStatsUnknownUserNames,
+                  usmStatsUnknownEngineIDs,
+                  usmStatsWrongDigests,
+                  usmStatsDecryptionErrors,
+                  usmUserSpinLock,
+                  usmUserSecurityName,
+                  usmUserCloneFrom,
+                  usmUserAuthProtocol,
+                  usmUserAuthKeyChange,
+                  usmUserOwnAuthKeyChange,
+                  usmUserPrivProtocol,
+                  usmUserPrivKeyChange,
+                  usmUserOwnPrivKeyChange,
+                  usmUserPublic,
+                  usmUserStorageType,
+                  usmUserStatus
+                }
+    STATUS       current
+    DESCRIPTION "A collection of objects providing for configuration
+                 of an SNMP engine which implements the SNMP
+                 User-based Security Model.
+                "
+    ::= { usmMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-USM-AES-MIB.mib b/snmp_builder/mibs/SNMP-USM-AES-MIB.mib
new file mode 100644
index 0000000..4c17302
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-USM-AES-MIB.mib
@@ -0,0 +1,62 @@
+SNMP-USM-AES-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-IDENTITY,
+        snmpModules             FROM SNMPv2-SMI          -- [RFC2578]
+        snmpPrivProtocols       FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]
+
+snmpUsmAesMIB  MODULE-IDENTITY
+    LAST-UPDATED "200406140000Z"
+    ORGANIZATION "IETF"
+    CONTACT-INFO "Uri Blumenthal
+                  Lucent Technologies / Bell Labs
+                  67 Whippany Rd.
+                  14D-318
+                  Whippany, NJ  07981, USA
+                  973-386-2163
+                  uri@bell-labs.com
+
+                  Fabio Maino
+                  Andiamo Systems, Inc.
+                  375 East Tasman Drive
+                  San Jose, CA  95134, USA
+                  408-853-7530
+                  fmaino@andiamo.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA  95134-1706, USA
+
+                  408-526-5260
+                  kzm@cisco.com"
+    DESCRIPTION  "Definitions of Object Identities needed for
+                  the use of AES by SNMP's User-based Security
+                  Model.
+
+                  Copyright (C) The Internet Society (2004).
+
+            This version of this MIB module is part of RFC 3826;
+            see the RFC itself for full legal notices.
+            Supplementary information may be available on
+            http://www.ietf.org/copyrights/ianamib.html."
+
+    REVISION     "200406140000Z"
+    DESCRIPTION  "Initial version, published as RFC3826"
+    ::= { snmpModules 20 }
+
+usmAesCfb128Protocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The CFB128-AES-128 Privacy Protocol."
+    REFERENCE    "- Specification for the ADVANCED ENCRYPTION
+                    STANDARD. Federal Information Processing
+                    Standard (FIPS) Publication 197.
+                    (November 2001).
+
+                  - Dworkin, M., NIST Recommendation for Block
+                    Cipher Modes of Operation, Methods and
+                    Techniques. NIST Special Publication 800-38A
+                    (December 2001).
+                 "
+    ::= { snmpPrivProtocols 4 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-USM-DH-OBJECTS-MIB.mib b/snmp_builder/mibs/SNMP-USM-DH-OBJECTS-MIB.mib
new file mode 100644
index 0000000..7377425
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-USM-DH-OBJECTS-MIB.mib
@@ -0,0 +1,532 @@
+SNMP-USM-DH-OBJECTS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    -- OBJECT-IDENTITY,
+    experimental, Integer32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    usmUserEntry
+        FROM SNMP-USER-BASED-SM-MIB
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB;
+
+snmpUsmDHObjectsMIB MODULE-IDENTITY
+    LAST-UPDATED "200003060000Z"  -- 6 March 2000, Midnight
+    ORGANIZATION "Excite@Home"
+    CONTACT-INFO "Author: Mike StJohns
+                  Postal: Excite@Home
+                          450 Broadway
+                          Redwood City, CA 94063
+                  Email:  stjohns@corp.home.net
+                  Phone:  +1-650-556-5368"
+    DESCRIPTION
+        "The management information definitions for providing forward
+    secrecy for key changes for the usmUserTable, and for providing a
+    method for 'kickstarting' access to the agent via a Diffie-Helman
+    key agreement."
+
+    REVISION     "200003060000Z"
+    DESCRIPTION
+       "Initial version published as RFC 2786."
+    ::= { experimental 101 }  -- IANA DHKEY-CHANGE 101
+
+-- Administrative assignments
+
+usmDHKeyObjects OBJECT IDENTIFIER ::= { snmpUsmDHObjectsMIB 1 }
+usmDHKeyConformance OBJECT IDENTIFIER ::= { snmpUsmDHObjectsMIB 2 }
+
+-- Textual conventions
+
+DHKeyChange ::=         TEXTUAL-CONVENTION
+    STATUS              current
+    DESCRIPTION
+        "Upon initialization, or upon creation of a row containing an
+    object of this type, and after any successful SET of this value, a
+    GET of this value returns 'y' where y = g^xa MOD p, and where g is
+    the base from usmDHParameters, p is the prime from
+    usmDHParameters, and xa is a new random integer selected by the
+    agent in the interval 2^(l-1) <= xa < 2^l < p-1.  'l' is the
+    optional privateValueLength from usmDHParameters in bits.  If 'l'
+    is omitted, then xa (and xr below) is selected in the interval 0
+    <= xa < p-1.  y is expressed as an OCTET STRING 'PV' of length 'k'
+    which satisfies
+
+              k
+        y =  SUM   2^(8(k-i)) PV'i
+             i=1
+
+        where PV1,...,PVk are the octets of PV from first to last, and
+        where PV1 <> 0.
+
+    A successful SET consists of the value 'y' expressed as an OCTET
+    STRING as above concatenated with the value 'z'(expressed as an
+    OCTET STRING in the same manner as y) where z = g^xr MOD p, where
+    g, p and l are as above, and where xr is a new random integer
+    selected by the manager in the interval 2^(l-1) <= xr < 2^l <
+    p-1. A SET to an object of this type will fail with the error
+    wrongValue if the current 'y' does not match the 'y' portion of
+    the value of the varbind for the object. (E.g. GET yout, SET
+    concat(yin, z), yout <> yin).
+
+    Note that the private values xa and xr are never transmitted from
+    manager to device or vice versa, only the values y and z.
+    Obviously, these values must be retained until a successful SET on
+    the associated object.
+
+    The shared secret 'sk' is calculated at the agent as sk = z^xa MOD
+    p, and at the manager as sk = y^xr MOD p.
+
+    Each object definition of this type MUST describe how to map from
+    the shared secret 'sk' to the operational key value used by the
+    protocols and operations related to the object.  In general, if n
+    bits of key are required, the author suggests using the n
+    right-most bits of the shared secret as the operational key value."
+    REFERENCE
+        "-- Diffie-Hellman Key-Agreement Standard, PKCS #3;
+            RSA Laboratories, November 1993"
+    SYNTAX              OCTET STRING
+
+-- Diffie Hellman public values
+
+usmDHPublicObjects      OBJECT IDENTIFIER ::= { usmDHKeyObjects 1 }
+
+usmDHParameters OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS read-write
+    STATUS  current
+    DESCRIPTION
+        "The public Diffie-Hellman parameters for doing a Diffie-Hellman
+    key agreement for this device.  This is encoded as an ASN.1
+    DHParameter per PKCS #3, section 9.  E.g.
+
+        DHParameter ::= SEQUENCE {
+           prime   INTEGER,   -- p
+           base    INTEGER,   -- g
+           privateValueLength  INTEGER OPTIONAL }
+
+    Implementors are encouraged to use either the values from
+    Oakley Group 1  or the values of from Oakley Group 2 as specified
+    in RFC-2409, The Internet Key Exchange, Section 6.1, 6.2 as the
+    default for this object.  Other values may be used, but the
+    security properties of those values MUST be well understood and
+    MUST meet the requirements of PKCS #3 for the selection of
+    Diffie-Hellman primes.
+
+        In addition, any time usmDHParameters changes, all values of
+    type DHKeyChange will change and new random numbers MUST be
+    generated by the agent for each DHKeyChange object."
+    REFERENCE
+        "-- Diffie-Hellman Key-Agreement Standard, PKCS #3,
+            RSA Laboratories, November 1993
+         -- The Internet Key Exchange, RFC 2409, November 1998,
+            Sec 6.1, 6.2"
+    ::= { usmDHPublicObjects 1 }
+
+usmDHUserKeyTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF UsmDHUserKeyEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "This table augments and extends the usmUserTable and provides
+    4 objects which exactly mirror the objects in that table with the
+    textual convention of 'KeyChange'.  This extension allows key
+    changes to be done in a manner where the knowledge of the current
+    secret plus knowledge of the key change data exchanges (e.g. via
+    wiretapping)  will not reveal the new key."
+    ::= { usmDHPublicObjects 2 }
+
+usmDHUserKeyEntry OBJECT-TYPE
+    SYNTAX  UsmDHUserKeyEntry
+    MAX-ACCESS not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A row of DHKeyChange objects which augment or replace the
+    functionality of the KeyChange objects in the base table row."
+    AUGMENTS { usmUserEntry }
+    ::= {usmDHUserKeyTable 1 }
+
+UsmDHUserKeyEntry ::= SEQUENCE {
+        usmDHUserAuthKeyChange          DHKeyChange,
+    usmDHUserOwnAuthKeyChange   DHKeyChange,
+        usmDHUserPrivKeyChange          DHKeyChange,
+        usmDHUserOwnPrivKeyChange       DHKeyChange
+        }
+
+usmDHUserAuthKeyChange OBJECT-TYPE
+    SYNTAX  DHKeyChange
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object used to change any given user's Authentication Key
+    using a Diffie-Hellman key exchange.
+
+    The right-most n bits of the shared secret 'sk', where 'n' is the
+    number of bits required for the protocol defined by
+    usmUserAuthProtocol, are installed as the operational
+    authentication key for this row after a successful SET."
+    ::= { usmDHUserKeyEntry 1 }
+
+usmDHUserOwnAuthKeyChange OBJECT-TYPE
+    SYNTAX  DHKeyChange
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object used to change the agents own Authentication Key
+    using a Diffie-Hellman key exchange.
+
+    The right-most n bits of the shared secret 'sk', where 'n' is the
+    number of bits required for the protocol defined by
+    usmUserAuthProtocol, are installed as the operational
+    authentication key for this row after a successful SET."
+    ::= { usmDHUserKeyEntry 2 }
+
+usmDHUserPrivKeyChange OBJECT-TYPE
+    SYNTAX  DHKeyChange
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object used to change any given user's Privacy Key using
+    a Diffie-Hellman key exchange.
+
+    The right-most n bits of the shared secret 'sk', where 'n' is the
+    number of bits required for the protocol defined by
+    usmUserPrivProtocol, are installed as the operational privacy key
+    for this row after a successful SET."
+    ::= { usmDHUserKeyEntry 3 }
+
+usmDHUserOwnPrivKeyChange OBJECT-TYPE
+    SYNTAX  DHKeyChange
+    MAX-ACCESS read-create
+    STATUS  current
+    DESCRIPTION
+        "The object used to change the agent's own Privacy Key using a
+    Diffie-Hellman key exchange.
+
+    The right-most n bits of the shared secret 'sk', where 'n' is the
+    number of bits required for the protocol defined by
+    usmUserPrivProtocol, are installed as the operational privacy key
+    for this row after a successful SET."
+    ::= { usmDHUserKeyEntry 4 }
+
+usmDHKickstartGroup OBJECT IDENTIFIER ::= { usmDHKeyObjects 2 }
+
+usmDHKickstartTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF UsmDHKickstartEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of mappings between zero or more Diffie-Helman key
+    agreement values and entries in the usmUserTable.  Entries in this
+    table are created by providing the associated device with a
+    Diffie-Helman public value and a usmUserName/usmUserSecurityName
+    pair during initialization. How these values are provided is
+    outside the scope of this MIB, but could be provided manually, or
+    through a configuration file.  Valid public value/name pairs
+    result in the creation of a row in this table as well as the
+    creation of an associated row (with keys derived as indicated) in
+    the usmUserTable.  The actual access the related usmSecurityName
+    has is dependent on the entries in the VACM tables.  In general,
+    an implementor will specify one or more standard security names
+    and will provide entries in the VACM tables granting various
+    levels of access to those names.  The actual content of the VACM
+
+    table is beyond the scope of this MIB.
+
+    Note: This table is expected to be readable without authentication
+    using the usmUserSecurityName 'dhKickstart'.  See the conformance
+    statements for details."
+    ::= { usmDHKickstartGroup 1 }
+
+usmDHKickstartEntry OBJECT-TYPE
+    SYNTAX      UsmDHKickstartEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the usmDHKickstartTable.  The agent SHOULD either
+    delete this entry or mark it as inactive upon a successful SET of
+    any of the KeyChange-typed objects in the usmUserEntry or upon a
+    successful SET of any of the DHKeyChange-typed objects in the
+    usmDhKeyChangeEntry where the related usmSecurityName (e.g. row of
+    usmUserTable or row of ushDhKeyChangeTable) equals this entry's
+    usmDhKickstartSecurityName.  In otherwords, once you've changed
+    one or more of the keys for a row in usmUserTable with a
+    particular security name, the row in this table with that same
+    security name is no longer useful or meaningful."
+    INDEX   { usmDHKickstartIndex }
+    ::= {usmDHKickstartTable 1 }
+
+UsmDHKickstartEntry ::= SEQUENCE  {
+        usmDHKickstartIndex     Integer32,
+        usmDHKickstartMyPublic  OCTET STRING,
+        usmDHKickstartMgrPublic OCTET STRING,
+        usmDHKickstartSecurityName      SnmpAdminString
+        }
+
+usmDHKickstartIndex OBJECT-TYPE
+    SYNTAX      Integer32  (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Index value for this row."
+    ::= { usmDHKickstartEntry 1 }
+
+usmDHKickstartMyPublic OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The agent's Diffie-Hellman public value for this row.  At
+
+    initialization, the agent generates a random number and derives
+    its public value from that number.  This public value is published
+    here.  This public value 'y' equals g^r MOD p where g is the from
+    the set of Diffie-Hellman parameters, p is the prime from those
+    parameters, and r is a random integer selected by the agent in the
+    interval 2^(l-1) <= r < p-1 < 2^l.  If l is unspecified, then r is
+    a random integer selected in the interval 0 <= r < p-1
+
+    The public value is expressed as an OCTET STRING 'PV' of length
+    'k' which satisfies
+
+              k
+        y =  SUM   2^(8(k-i)) PV'i
+             i = 1
+
+        where PV1,...,PVk are the octets of PV from first to last, and
+        where PV1 != 0.
+
+    The following DH parameters (Oakley group #2, RFC 2409, sec 6.1,
+    6.2) are used for this object:
+
+    g = 2
+    p = FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1
+        29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD
+        EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245
+        E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED
+        EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE65381
+        FFFFFFFF FFFFFFFF
+    l=1024
+    "
+    REFERENCE
+        "-- Diffie-Hellman Key-Agreement Standard, PKCS#3v1.4;
+            RSA Laboratories, November 1993
+         -- The Internet Key Exchange, RFC2409;
+            Harkins, D., Carrel, D.; November 1998"
+    ::= { usmDHKickstartEntry 2 }
+
+usmDHKickstartMgrPublic OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The manager's Diffie-Hellman public value for this row.  Note
+    that this value is not set via the SNMP agent, but may be set via
+    some out of band method, such as the device's configuration file.
+
+    The manager calculates this value in the same manner and using the
+    same parameter set as the agent does.  E.g. it selects a random
+    number 'r', calculates y = g^r mod p and provides 'y' as the
+    public number expressed as an OCTET STRING.  See
+    usmDHKickstartMyPublic for details.
+
+    When this object is set with a valid value during initialization,
+    a row is created in the usmUserTable with the following values:
+
+    usmUserEngineID             localEngineID
+    usmUserName                 [value of usmDHKickstartSecurityName]
+    usmUserSecurityName         [value of usmDHKickstartSecurityName]
+    usmUserCloneFrom            ZeroDotZero
+    usmUserAuthProtocol         usmHMACMD5AuthProtocol
+    usmUserAuthKeyChange        -- derived from set value
+    usmUserOwnAuthKeyChange     -- derived from set value
+    usmUserPrivProtocol         usmDESPrivProtocol
+    usmUserPrivKeyChange        -- derived from set value
+    usmUserOwnPrivKeyChange     -- derived from set value
+    usmUserPublic               ''
+    usmUserStorageType          permanent
+    usmUserStatus               active
+
+    A shared secret 'sk' is calculated at the agent as sk =
+    mgrPublic^r mod p where r is the agents random number and p is the
+    DH prime from the common parameters.  The underlying privacy key
+    for this row is derived from sk by applying the key derivation
+    function PBKDF2 defined in PKCS#5v2.0 with a salt of 0xd1310ba6,
+    and iterationCount of 500, a keyLength of 16 (for
+    usmDESPrivProtocol), and a prf (pseudo random function) of
+    'id-hmacWithSHA1'.  The underlying authentication key for this row
+    is derived from sk by applying the key derivation function PBKDF2
+    with a salt of 0x98dfb5ac , an interation count of 500, a
+    keyLength of 16 (for usmHMAC5AuthProtocol), and a prf of
+    'id-hmacWithSHA1'.  Note: The salts are the first two words in the
+    ks0 [key schedule 0] of the BLOWFISH cipher from 'Applied
+    Cryptography' by Bruce Schnier - they could be any relatively
+    random string of bits.
+
+    The manager can use its knowledge of its own random number and the
+    agent's public value to kickstart its access to the agent in a
+    secure manner.  Note that the security of this approach is
+    directly related to the strength of the authorization security of
+    the out of band provisioning of the managers public value
+    (e.g. the configuration file), but is not dependent at all on the
+    strength of the confidentiality of the out of band provisioning
+    data."
+    REFERENCE
+        "-- Password-Based Cryptography Standard, PKCS#5v2.0;
+            RSA Laboratories, March 1999
+         -- Applied Cryptography, 2nd Ed.; B. Schneier,
+            Counterpane Systems; John Wiley & Sons, 1996"
+    ::= { usmDHKickstartEntry 3 }
+
+usmDHKickstartSecurityName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The usmUserName and usmUserSecurityName in the usmUserTable
+    associated with this row.  This is provided in the same manner and
+    at the same time as the usmDHKickstartMgrPublic value -
+    e.g. possibly manually, or via the device's configuration file."
+    ::= { usmDHKickstartEntry 4 }
+
+-- Conformance Information
+
+usmDHKeyMIBCompliances  OBJECT IDENTIFIER ::= { usmDHKeyConformance 1 }
+usmDHKeyMIBGroups       OBJECT IDENTIFIER ::= { usmDHKeyConformance 2 }
+
+-- Compliance statements
+
+usmDHKeyMIBCompliance   MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for this module."
+    MODULE
+        GROUP usmDHKeyMIBBasicGroup
+        DESCRIPTION
+        "This group MAY be implemented by any agent which
+        implements the usmUserTable and which wishes to provide the
+        ability to change user and agent authentication and privacy
+        keys via Diffie-Hellman key exchanges."
+
+        GROUP usmDHKeyParamGroup
+        DESCRIPTION
+            "This group MUST be implemented by any agent which
+        implements a MIB containing the DHKeyChange Textual
+        Convention defined in this module."
+
+        GROUP usmDHKeyKickstartGroup
+        DESCRIPTION
+            "This group MAY be implemented by any agent which
+        implements the usmUserTable and which wishes the ability to
+        populate the USM table based on out-of-band provided DH
+        ignition values.
+
+             Any agent implementing this group is expected to provide
+        preinstalled entries in the vacm tables as follows:
+
+             In the usmUserTable: This entry allows access to the
+        system and dhKickstart groups
+
+        usmUserEngineID         localEngineID
+        usmUserName             'dhKickstart'
+        usmUserSecurityName     'dhKickstart'
+        usmUserCloneFrom        ZeroDotZero
+        usmUserAuthProtocol     none
+        usmUserAuthKeyChange    ''
+        usmUserOwnAuthKeyChange ''
+        usmUserPrivProtocol     none
+        usmUserPrivKeyChange    ''
+        usmUserOwnPrivKeyChange ''
+        usmUserPublic           ''
+        usmUserStorageType      permanent
+        usmUserStatus           active
+
+            In the vacmSecurityToGroupTable: This maps the initial
+        user into the accessible objects.
+
+        vacmSecurityModel               3 (USM)
+        vacmSecurityName                'dhKickstart'
+        vacmGroupName                   'dhKickstart'
+        vacmSecurityToGroupStorageType  permanent
+        vacmSecurityToGroupStatus       active
+
+            In the vacmAccessTable: Group name to view name translation.
+
+        vacmGroupName                   'dhKickstart'
+    vacmAccessContextPrefix             ''
+        vacmAccessSecurityModel         3 (USM)
+        vacmAccessSecurityLevel         noAuthNoPriv
+        vacmAccessContextMatch          exact
+        vacmAccessReadViewName          'dhKickRestricted'
+        vacmAccessWriteViewName         ''
+        vacmAccessNotifyViewName        'dhKickRestricted'
+        vacmAccessStorageType           permanent
+        vacmAccessStatus                active
+
+            In the vacmViewTreeFamilyTable: Two entries to allow the
+        initial entry to access the system and kickstart groups.
+
+        vacmViewTreeFamilyViewName      'dhKickRestricted'
+        vacmViewTreeFamilySubtree       1.3.6.1.2.1.1  (system)
+        vacmViewTreeFamilyMask          ''
+
+        vacmViewTreeFamilyType          1
+        vacmViewTreeFamilyStorageType   permanent
+        vacmViewTreeFamilyStatus        active
+
+        vacmViewTreeFamilyViewName      'dhKickRestricted'
+        vacmViewTreeFamilySubtree         (usmDHKickstartTable OID)
+        vacmViewTreeFamilyMask          ''
+        vacmViewTreeFamilyType          1
+        vacmViewTreeFamilyStorageType   permanent
+        vacmViewTreeFamilyStatus        active
+        "
+
+        OBJECT usmDHParameters
+        MIN-ACCESS      read-only
+        DESCRIPTION
+            "It is compliant to implement this object as read-only for
+        any device."
+    ::= { usmDHKeyMIBCompliances 1 }
+
+-- Units of Compliance
+
+usmDHKeyMIBBasicGroup OBJECT-GROUP
+    OBJECTS     {
+                  usmDHUserAuthKeyChange,
+                  usmDHUserOwnAuthKeyChange,
+                  usmDHUserPrivKeyChange,
+                  usmDHUserOwnPrivKeyChange
+                }
+    STATUS      current
+    DESCRIPTION
+        ""
+    ::= { usmDHKeyMIBGroups 1 }
+
+usmDHKeyParamGroup OBJECT-GROUP
+    OBJECTS     {
+                  usmDHParameters
+                }
+    STATUS      current
+    DESCRIPTION
+        "The mandatory object for all MIBs which use the DHKeyChange
+    textual convention."
+    ::= { usmDHKeyMIBGroups 2 }
+
+usmDHKeyKickstartGroup OBJECT-GROUP
+    OBJECTS     {
+                  usmDHKickstartMyPublic,
+                  usmDHKickstartMgrPublic,
+                  usmDHKickstartSecurityName
+                }
+    STATUS      current
+    DESCRIPTION
+        "The objects used for kickstarting one or more SNMPv3 USM
+    associations via a configuration file or other out of band,
+    non-confidential access."
+    ::= { usmDHKeyMIBGroups 3 }
+
+END
diff --git a/snmp_builder/mibs/SNMP-VIEW-BASED-ACM-MIB.mib b/snmp_builder/mibs/SNMP-VIEW-BASED-ACM-MIB.mib
new file mode 100644
index 0000000..7244ad0
--- /dev/null
+++ b/snmp_builder/mibs/SNMP-VIEW-BASED-ACM-MIB.mib
@@ -0,0 +1,830 @@
+SNMP-VIEW-BASED-ACM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-COMPLIANCE, OBJECT-GROUP       FROM SNMPv2-CONF
+    MODULE-IDENTITY, OBJECT-TYPE,
+    snmpModules                           FROM SNMPv2-SMI
+    TestAndIncr,
+    RowStatus, StorageType                FROM SNMPv2-TC
+    SnmpAdminString,
+    SnmpSecurityLevel,
+    SnmpSecurityModel                     FROM SNMP-FRAMEWORK-MIB;
+
+snmpVacmMIB       MODULE-IDENTITY
+    LAST-UPDATED "200210160000Z"          -- 16 Oct 2002, midnight
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-email:   snmpv3@lists.tislabs.com
+                  Subscribe:  majordomo@lists.tislabs.com
+                              In message body:  subscribe snmpv3
+
+                  Co-Chair:   Russ Mundy
+                              Network Associates Laboratories
+                  postal:     15204 Omega Drive, Suite 300
+                              Rockville, MD 20850-4601
+                              USA
+                  email:      mundy@tislabs.com
+                  phone:      +1 301-947-7107
+
+                  Co-Chair:   David Harrington
+                              Enterasys Networks
+                  Postal:     35 Industrial Way
+                              P. O. Box 5004
+                              Rochester, New Hampshire 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  Phone:      +1 603-337-2614
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+                  email:      bwijnen@lucent.com
+                  phone:      +31-348-480-685
+
+                  Co-editor:  Randy Presuhn
+                              BMC Software, Inc.
+
+                  postal:     2141 North First Street
+                              San Jose, CA 95131
+                              USA
+                  email:      randy_presuhn@bmc.com
+                  phone:      +1 408-546-1006
+
+                  Co-editor:  Keith McCloghrie
+                              Cisco Systems, Inc.
+                  postal:     170 West Tasman Drive
+                              San Jose, CA  95134-1706
+                              USA
+                  email:      kzm@cisco.com
+                  phone:      +1-408-526-5260
+                 "
+    DESCRIPTION  "The management information definitions for the
+                  View-based Access Control Model for SNMP.
+
+                  Copyright (C) The Internet Society (2002). This
+                  version of this MIB module is part of RFC 3415;
+                  see the RFC itself for full legal notices.
+                 "
+--  Revision history
+
+    REVISION     "200210160000Z"          -- 16 Oct 2002, midnight
+    DESCRIPTION  "Clarifications, published as RFC3415"
+
+    REVISION     "199901200000Z"          -- 20 Jan 1999, midnight
+    DESCRIPTION  "Clarifications, published as RFC2575"
+
+    REVISION     "199711200000Z"          -- 20 Nov 1997, midnight
+    DESCRIPTION  "Initial version, published as RFC2275"
+    ::= { snmpModules 16 }
+
+-- Administrative assignments ****************************************
+
+vacmMIBObjects      OBJECT IDENTIFIER ::= { snmpVacmMIB 1 }
+vacmMIBConformance  OBJECT IDENTIFIER ::= { snmpVacmMIB 2 }
+
+-- Information about Local Contexts **********************************
+
+vacmContextTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VacmContextEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The table of locally available contexts.
+
+                 This table provides information to SNMP Command
+
+                 Generator applications so that they can properly
+                 configure the vacmAccessTable to control access to
+                 all contexts at the SNMP entity.
+
+                 This table may change dynamically if the SNMP entity
+                 allows that contexts are added/deleted dynamically
+                 (for instance when its configuration changes).  Such
+                 changes would happen only if the management
+                 instrumentation at that SNMP entity recognizes more
+                 (or fewer) contexts.
+
+                 The presence of entries in this table and of entries
+                 in the vacmAccessTable are independent.  That is, a
+                 context identified by an entry in this table is not
+                 necessarily referenced by any entries in the
+                 vacmAccessTable; and the context(s) referenced by an
+                 entry in the vacmAccessTable does not necessarily
+                 currently exist and thus need not be identified by an
+                 entry in this table.
+
+                 This table must be made accessible via the default
+                 context so that Command Responder applications have
+                 a standard way of retrieving the information.
+
+                 This table is read-only.  It cannot be configured via
+                 SNMP.
+                "
+    ::= { vacmMIBObjects 1 }
+
+vacmContextEntry OBJECT-TYPE
+    SYNTAX       VacmContextEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Information about a particular context."
+    INDEX       {
+                  vacmContextName
+                }
+    ::= { vacmContextTable 1 }
+
+VacmContextEntry ::= SEQUENCE
+    {
+        vacmContextName SnmpAdminString
+    }
+
+vacmContextName  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "A human readable name identifying a particular
+                 context at a particular SNMP entity.
+
+                 The empty contextName (zero length) represents the
+                 default context.
+                "
+    ::= { vacmContextEntry 1 }
+
+-- Information about Groups ******************************************
+
+vacmSecurityToGroupTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VacmSecurityToGroupEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "This table maps a combination of securityModel and
+                 securityName into a groupName which is used to define
+                 an access control policy for a group of principals.
+                "
+    ::= { vacmMIBObjects 2 }
+
+vacmSecurityToGroupEntry OBJECT-TYPE
+    SYNTAX       VacmSecurityToGroupEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An entry in this table maps the combination of a
+                 securityModel and securityName into a groupName.
+                "
+    INDEX       {
+                  vacmSecurityModel,
+                  vacmSecurityName
+                }
+    ::= { vacmSecurityToGroupTable 1 }
+
+VacmSecurityToGroupEntry ::= SEQUENCE
+    {
+        vacmSecurityModel               SnmpSecurityModel,
+        vacmSecurityName                SnmpAdminString,
+        vacmGroupName                   SnmpAdminString,
+        vacmSecurityToGroupStorageType  StorageType,
+        vacmSecurityToGroupStatus       RowStatus
+    }
+
+vacmSecurityModel OBJECT-TYPE
+    SYNTAX       SnmpSecurityModel(1..2147483647)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The Security Model, by which the vacmSecurityName
+                 referenced by this entry is provided.
+
+                 Note, this object may not take the 'any' (0) value.
+                "
+    ::= { vacmSecurityToGroupEntry 1 }
+
+vacmSecurityName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The securityName for the principal, represented in a
+                 Security Model independent format, which is mapped by
+                 this entry to a groupName.
+                "
+    ::= { vacmSecurityToGroupEntry 2 }
+
+vacmGroupName    OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The name of the group to which this entry (e.g., the
+                 combination of securityModel and securityName)
+                 belongs.
+
+                 This groupName is used as index into the
+                 vacmAccessTable to select an access control policy.
+                 However, a value in this table does not imply that an
+                 instance with the value exists in table vacmAccesTable.
+                "
+    ::= { vacmSecurityToGroupEntry 3 }
+
+vacmSecurityToGroupStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+                 Conceptual rows having the value 'permanent' need not
+                 allow write-access to any columnar objects in the row.
+                "
+    DEFVAL      { nonVolatile }
+    ::= { vacmSecurityToGroupEntry 4 }
+
+vacmSecurityToGroupStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 Until instances of all corresponding columns are
+                 appropriately configured, the value of the
+
+                 corresponding instance of the vacmSecurityToGroupStatus
+                 column is 'notReady'.
+
+                 In particular, a newly created row cannot be made
+                 active until a value has been set for vacmGroupName.
+
+                 The  RowStatus TC [RFC2579] requires that this
+                 DESCRIPTION clause states under which circumstances
+                 other objects in this row can be modified:
+
+                 The value of this object has no effect on whether
+                 other objects in this conceptual row can be modified.
+                "
+    ::= { vacmSecurityToGroupEntry 5 }
+
+-- Information about Access Rights ***********************************
+
+vacmAccessTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VacmAccessEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The table of access rights for groups.
+
+                 Each entry is indexed by a groupName, a contextPrefix,
+                 a securityModel and a securityLevel.  To determine
+                 whether access is allowed, one entry from this table
+                 needs to be selected and the proper viewName from that
+                 entry must be used for access control checking.
+
+                 To select the proper entry, follow these steps:
+
+                 1) the set of possible matches is formed by the
+                    intersection of the following sets of entries:
+
+                      the set of entries with identical vacmGroupName
+                      the union of these two sets:
+                       - the set with identical vacmAccessContextPrefix
+                       - the set of entries with vacmAccessContextMatch
+                         value of 'prefix' and matching
+                         vacmAccessContextPrefix
+                      intersected with the union of these two sets:
+                       - the set of entries with identical
+                         vacmSecurityModel
+                       - the set of entries with vacmSecurityModel
+                         value of 'any'
+                      intersected with the set of entries with
+                      vacmAccessSecurityLevel value less than or equal
+                      to the requested securityLevel
+
+                 2) if this set has only one member, we're done
+                    otherwise, it comes down to deciding how to weight
+                    the preferences between ContextPrefixes,
+                    SecurityModels, and SecurityLevels as follows:
+                    a) if the subset of entries with securityModel
+                       matching the securityModel in the message is
+                       not empty, then discard the rest.
+                    b) if the subset of entries with
+                       vacmAccessContextPrefix matching the contextName
+                       in the message is not empty,
+                       then discard the rest
+                    c) discard all entries with ContextPrefixes shorter
+                       than the longest one remaining in the set
+                    d) select the entry with the highest securityLevel
+
+                 Please note that for securityLevel noAuthNoPriv, all
+                 groups are really equivalent since the assumption that
+                 the securityName has been authenticated does not hold.
+                "
+    ::= { vacmMIBObjects 4 }
+
+vacmAccessEntry  OBJECT-TYPE
+    SYNTAX       VacmAccessEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An access right configured in the Local Configuration
+                 Datastore (LCD) authorizing access to an SNMP context.
+
+                 Entries in this table can use an instance value for
+                 object vacmGroupName even if no entry in table
+                 vacmAccessSecurityToGroupTable has a corresponding
+                 value for object vacmGroupName.
+                "
+    INDEX       { vacmGroupName,
+                  vacmAccessContextPrefix,
+                  vacmAccessSecurityModel,
+                  vacmAccessSecurityLevel
+                }
+    ::= { vacmAccessTable 1 }
+
+VacmAccessEntry ::= SEQUENCE
+    {
+        vacmAccessContextPrefix    SnmpAdminString,
+        vacmAccessSecurityModel    SnmpSecurityModel,
+        vacmAccessSecurityLevel    SnmpSecurityLevel,
+        vacmAccessContextMatch     INTEGER,
+        vacmAccessReadViewName     SnmpAdminString,
+        vacmAccessWriteViewName    SnmpAdminString,
+        vacmAccessNotifyViewName   SnmpAdminString,
+        vacmAccessStorageType      StorageType,
+        vacmAccessStatus           RowStatus
+    }
+
+vacmAccessContextPrefix OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "In order to gain the access rights allowed by this
+                 conceptual row, a contextName must match exactly
+                 (if the value of vacmAccessContextMatch is 'exact')
+                 or partially (if the value of vacmAccessContextMatch
+                 is 'prefix') to the value of the instance of this
+                 object.
+                "
+    ::= { vacmAccessEntry 1 }
+
+vacmAccessSecurityModel OBJECT-TYPE
+    SYNTAX       SnmpSecurityModel
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "In order to gain the access rights allowed by this
+                 conceptual row, this securityModel must be in use.
+                "
+    ::= { vacmAccessEntry 2 }
+
+vacmAccessSecurityLevel OBJECT-TYPE
+    SYNTAX       SnmpSecurityLevel
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The minimum level of security required in order to
+                 gain the access rights allowed by this conceptual
+                 row.  A securityLevel of noAuthNoPriv is less than
+                 authNoPriv which in turn is less than authPriv.
+
+                 If multiple entries are equally indexed except for
+                 this vacmAccessSecurityLevel index, then the entry
+                 which has the highest value for
+                 vacmAccessSecurityLevel is selected.
+                "
+    ::= { vacmAccessEntry 3 }
+
+vacmAccessContextMatch OBJECT-TYPE
+    SYNTAX       INTEGER
+                { exact (1), -- exact match of prefix and contextName
+                  prefix (2) -- Only match to the prefix
+                }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "If the value of this object is exact(1), then all
+                 rows where the contextName exactly matches
+                 vacmAccessContextPrefix are selected.
+
+                 If the value of this object is prefix(2), then all
+                 rows where the contextName whose starting octets
+                 exactly match vacmAccessContextPrefix are selected.
+                 This allows for a simple form of wildcarding.
+                "
+    DEFVAL      { exact }
+    ::= { vacmAccessEntry 4 }
+
+vacmAccessReadViewName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The value of an instance of this object identifies
+                 the MIB view of the SNMP context to which this
+                 conceptual row authorizes read access.
+
+                 The identified MIB view is that one for which the
+                 vacmViewTreeFamilyViewName has the same value as the
+                 instance of this object; if the value is the empty
+                 string or if there is no active MIB view having this
+                 value of vacmViewTreeFamilyViewName, then no access
+                 is granted.
+                "
+    DEFVAL      { ''H }   -- the empty string
+    ::= { vacmAccessEntry 5 }
+
+vacmAccessWriteViewName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The value of an instance of this object identifies
+                 the MIB view of the SNMP context to which this
+                 conceptual row authorizes write access.
+
+                 The identified MIB view is that one for which the
+                 vacmViewTreeFamilyViewName has the same value as the
+                 instance of this object; if the value is the empty
+                 string or if there is no active MIB view having this
+                 value of vacmViewTreeFamilyViewName, then no access
+                 is granted.
+                "
+    DEFVAL      { ''H }   -- the empty string
+    ::= { vacmAccessEntry 6 }
+
+vacmAccessNotifyViewName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The value of an instance of this object identifies
+                 the MIB view of the SNMP context to which this
+                 conceptual row authorizes access for notifications.
+
+                 The identified MIB view is that one for which the
+                 vacmViewTreeFamilyViewName has the same value as the
+                 instance of this object; if the value is the empty
+                 string or if there is no active MIB view having this
+                 value of vacmViewTreeFamilyViewName, then no access
+                 is granted.
+                "
+    DEFVAL      { ''H }   -- the empty string
+    ::= { vacmAccessEntry 7 }
+
+vacmAccessStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' need not
+                 allow write-access to any columnar objects in the row.
+                "
+    DEFVAL      { nonVolatile }
+    ::= { vacmAccessEntry 8 }
+
+vacmAccessStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 The  RowStatus TC [RFC2579] requires that this
+                 DESCRIPTION clause states under which circumstances
+                 other objects in this row can be modified:
+
+                 The value of this object has no effect on whether
+                 other objects in this conceptual row can be modified.
+                "
+    ::= { vacmAccessEntry 9 }
+
+-- Information about MIB views ***************************************
+
+-- Support for instance-level granularity is optional.
+--
+-- In some implementations, instance-level access control
+-- granularity may come at a high performance cost.  Managers
+-- should avoid requesting such configurations unnecessarily.
+
+vacmMIBViews     OBJECT IDENTIFIER ::= { vacmMIBObjects 5 }
+
+vacmViewSpinLock OBJECT-TYPE
+    SYNTAX       TestAndIncr
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "An advisory lock used to allow cooperating SNMP
+                 Command Generator applications to coordinate their
+                 use of the Set operation in creating or modifying
+                 views.
+
+                 When creating a new view or altering an existing
+                 view, it is important to understand the potential
+                 interactions with other uses of the view.  The
+                 vacmViewSpinLock should be retrieved.  The name of
+                 the view to be created should be determined to be
+                 unique by the SNMP Command Generator application by
+                 consulting the vacmViewTreeFamilyTable.  Finally,
+                 the named view may be created (Set), including the
+                 advisory lock.
+                 If another SNMP Command Generator application has
+                 altered the views in the meantime, then the spin
+                 lock's value will have changed, and so this creation
+                 will fail because it will specify the wrong value for
+                 the spin lock.
+
+                 Since this is an advisory lock, the use of this lock
+                 is not enforced.
+                "
+    ::= { vacmMIBViews 1 }
+
+vacmViewTreeFamilyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VacmViewTreeFamilyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Locally held information about families of subtrees
+                 within MIB views.
+
+                 Each MIB view is defined by two sets of view subtrees:
+                   - the included view subtrees, and
+                   - the excluded view subtrees.
+                 Every such view subtree, both the included and the
+
+                 excluded ones, is defined in this table.
+
+                 To determine if a particular object instance is in
+                 a particular MIB view, compare the object instance's
+                 OBJECT IDENTIFIER with each of the MIB view's active
+                 entries in this table.  If none match, then the
+                 object instance is not in the MIB view.  If one or
+                 more match, then the object instance is included in,
+                 or excluded from, the MIB view according to the
+                 value of vacmViewTreeFamilyType in the entry whose
+                 value of vacmViewTreeFamilySubtree has the most
+                 sub-identifiers.  If multiple entries match and have
+                 the same number of sub-identifiers (when wildcarding
+                 is specified with the value of vacmViewTreeFamilyMask),
+                 then the lexicographically greatest instance of
+                 vacmViewTreeFamilyType determines the inclusion or
+                 exclusion.
+
+                 An object instance's OBJECT IDENTIFIER X matches an
+                 active entry in this table when the number of
+                 sub-identifiers in X is at least as many as in the
+                 value of vacmViewTreeFamilySubtree for the entry,
+                 and each sub-identifier in the value of
+                 vacmViewTreeFamilySubtree matches its corresponding
+                 sub-identifier in X.  Two sub-identifiers match
+                 either if the corresponding bit of the value of
+                 vacmViewTreeFamilyMask for the entry is zero (the
+                 'wild card' value), or if they are equal.
+
+                 A 'family' of subtrees is the set of subtrees defined
+                 by a particular combination of values of
+                 vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask.
+
+                 In the case where no 'wild card' is defined in the
+                 vacmViewTreeFamilyMask, the family of subtrees reduces
+                 to a single subtree.
+
+                 When creating or changing MIB views, an SNMP Command
+                 Generator application should utilize the
+                 vacmViewSpinLock to try to avoid collisions.  See
+                 DESCRIPTION clause of vacmViewSpinLock.
+
+                 When creating MIB views, it is strongly advised that
+                 first the 'excluded' vacmViewTreeFamilyEntries are
+                 created and then the 'included' entries.
+
+                 When deleting MIB views, it is strongly advised that
+                 first the 'included' vacmViewTreeFamilyEntries are
+
+                 deleted and then the 'excluded' entries.
+
+                 If a create for an entry for instance-level access
+                 control is received and the implementation does not
+                 support instance-level granularity, then an
+                 inconsistentName error must be returned.
+                "
+    ::= { vacmMIBViews 2 }
+
+vacmViewTreeFamilyEntry OBJECT-TYPE
+    SYNTAX       VacmViewTreeFamilyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Information on a particular family of view subtrees
+                 included in or excluded from a particular SNMP
+                 context's MIB view.
+
+                 Implementations must not restrict the number of
+                 families of view subtrees for a given MIB view,
+                 except as dictated by resource constraints on the
+                 overall number of entries in the
+                 vacmViewTreeFamilyTable.
+
+                 If no conceptual rows exist in this table for a given
+                 MIB view (viewName), that view may be thought of as
+                 consisting of the empty set of view subtrees.
+                "
+    INDEX       { vacmViewTreeFamilyViewName,
+                  vacmViewTreeFamilySubtree
+                }
+    ::= { vacmViewTreeFamilyTable 1 }
+
+VacmViewTreeFamilyEntry ::= SEQUENCE
+    {
+        vacmViewTreeFamilyViewName     SnmpAdminString,
+        vacmViewTreeFamilySubtree      OBJECT IDENTIFIER,
+        vacmViewTreeFamilyMask         OCTET STRING,
+        vacmViewTreeFamilyType         INTEGER,
+        vacmViewTreeFamilyStorageType  StorageType,
+        vacmViewTreeFamilyStatus       RowStatus
+    }
+
+vacmViewTreeFamilyViewName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The human readable name for a family of view subtrees.
+                "
+    ::= { vacmViewTreeFamilyEntry 1 }
+
+vacmViewTreeFamilySubtree OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The MIB subtree which when combined with the
+                 corresponding instance of vacmViewTreeFamilyMask
+                 defines a family of view subtrees.
+                "
+    ::= { vacmViewTreeFamilyEntry 2 }
+
+vacmViewTreeFamilyMask OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..16))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The bit mask which, in combination with the
+                 corresponding instance of vacmViewTreeFamilySubtree,
+                 defines a family of view subtrees.
+
+                 Each bit of this bit mask corresponds to a
+                 sub-identifier of vacmViewTreeFamilySubtree, with the
+                 most significant bit of the i-th octet of this octet
+                 string value (extended if necessary, see below)
+                 corresponding to the (8*i - 7)-th sub-identifier, and
+                 the least significant bit of the i-th octet of this
+                 octet string corresponding to the (8*i)-th
+                 sub-identifier, where i is in the range 1 through 16.
+
+                 Each bit of this bit mask specifies whether or not
+                 the corresponding sub-identifiers must match when
+                 determining if an OBJECT IDENTIFIER is in this
+                 family of view subtrees; a '1' indicates that an
+                 exact match must occur; a '0' indicates 'wild card',
+                 i.e., any sub-identifier value matches.
+
+                 Thus, the OBJECT IDENTIFIER X of an object instance
+                 is contained in a family of view subtrees if, for
+                 each sub-identifier of the value of
+                 vacmViewTreeFamilySubtree, either:
+
+                   the i-th bit of vacmViewTreeFamilyMask is 0, or
+
+                   the i-th sub-identifier of X is equal to the i-th
+                   sub-identifier of the value of
+                   vacmViewTreeFamilySubtree.
+
+                 If the value of this bit mask is M bits long and
+
+                 there are more than M sub-identifiers in the
+                 corresponding instance of vacmViewTreeFamilySubtree,
+                 then the bit mask is extended with 1's to be the
+                 required length.
+
+                 Note that when the value of this object is the
+                 zero-length string, this extension rule results in
+                 a mask of all-1's being used (i.e., no 'wild card'),
+                 and the family of view subtrees is the one view
+                 subtree uniquely identified by the corresponding
+                 instance of vacmViewTreeFamilySubtree.
+
+                 Note that masks of length greater than zero length
+                 do not need to be supported.  In this case this
+                 object is made read-only.
+                "
+    DEFVAL      { ''H }
+    ::= { vacmViewTreeFamilyEntry 3 }
+
+vacmViewTreeFamilyType OBJECT-TYPE
+    SYNTAX       INTEGER  { included(1), excluded(2) }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Indicates whether the corresponding instances of
+                 vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
+                 define a family of view subtrees which is included in
+                 or excluded from the MIB view.
+                "
+    DEFVAL      { included }
+    ::= { vacmViewTreeFamilyEntry 4 }
+
+vacmViewTreeFamilyStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' need not
+                 allow write-access to any columnar objects in the row.
+                "
+    DEFVAL      { nonVolatile }
+    ::= { vacmViewTreeFamilyEntry 5 }
+
+vacmViewTreeFamilyStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 The  RowStatus TC [RFC2579] requires that this
+                 DESCRIPTION clause states under which circumstances
+                 other objects in this row can be modified:
+
+                 The value of this object has no effect on whether
+                 other objects in this conceptual row can be modified.
+                "
+    ::= { vacmViewTreeFamilyEntry 6 }
+
+-- Conformance information *******************************************
+
+vacmMIBCompliances  OBJECT IDENTIFIER ::= { vacmMIBConformance 1 }
+vacmMIBGroups       OBJECT IDENTIFIER ::= { vacmMIBConformance 2 }
+
+-- Compliance statements *********************************************
+
+vacmMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "The compliance statement for SNMP engines which
+                 implement the SNMP View-based Access Control Model
+                 configuration MIB.
+                "
+    MODULE -- this module
+        MANDATORY-GROUPS { vacmBasicGroup }
+
+        OBJECT        vacmAccessContextMatch
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmAccessReadViewName
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmAccessWriteViewName
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmAccessNotifyViewName
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmAccessStorageType
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmAccessStatus
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Create/delete/modify access to the
+
+                      vacmAccessTable is not required.
+                     "
+
+        OBJECT        vacmViewTreeFamilyMask
+        WRITE-SYNTAX  OCTET STRING (SIZE (0))
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Support for configuration via SNMP of subtree
+                      families using wild-cards is not required.
+                     "
+
+        OBJECT        vacmViewTreeFamilyType
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmViewTreeFamilyStorageType
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT        vacmViewTreeFamilyStatus
+        MIN-ACCESS    read-only
+        DESCRIPTION  "Create/delete/modify access to the
+                      vacmViewTreeFamilyTable is not required.
+                     "
+    ::= { vacmMIBCompliances 1 }
+
+-- Units of conformance **********************************************
+
+vacmBasicGroup OBJECT-GROUP
+    OBJECTS {
+              vacmContextName,
+              vacmGroupName,
+              vacmSecurityToGroupStorageType,
+              vacmSecurityToGroupStatus,
+              vacmAccessContextMatch,
+              vacmAccessReadViewName,
+              vacmAccessWriteViewName,
+              vacmAccessNotifyViewName,
+              vacmAccessStorageType,
+              vacmAccessStatus,
+              vacmViewSpinLock,
+              vacmViewTreeFamilyMask,
+              vacmViewTreeFamilyType,
+              vacmViewTreeFamilyStorageType,
+              vacmViewTreeFamilyStatus
+            }
+    STATUS       current
+    DESCRIPTION "A collection of objects providing for remote
+                 configuration of an SNMP engine which implements
+
+                 the SNMP View-based Access Control Model.
+                "
+    ::= { vacmMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/SNMPv2-M2M-MIB.mib b/snmp_builder/mibs/SNMPv2-M2M-MIB.mib
new file mode 100644
index 0000000..95768d5
--- /dev/null
+++ b/snmp_builder/mibs/SNMPv2-M2M-MIB.mib
@@ -0,0 +1,807 @@
+SNMPv2-M2M-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Integer32, Counter32, snmpModules
+        FROM SNMPv2-SMI
+    DisplayString, InstancePointer, RowStatus, TimeStamp
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    contextIdentity
+        FROM SNMPv2-PARTY-MIB;
+
+snmpM2M MODULE-IDENTITY
+    LAST-UPDATED "9304010000Z"
+    ORGANIZATION "IETF SNMPv2 Working Group"
+    CONTACT-INFO
+            "        Steven Waldbusser
+
+             Postal: Carnegie Mellon University
+                     4910 Forbes Ave
+                     Pittsburgh, PA  15213
+
+                Tel: +1 412 268 6628
+                Fax: +1 412 268 4987
+
+             E-mail: waldbusser@cmu.edu"
+    DESCRIPTION
+            "The Manager-to-Manager MIB module."
+    ::= { snmpModules 2 }
+
+snmpM2MObjects OBJECT IDENTIFIER ::= { snmpM2M 1 }
+
+-- the alarm group
+--
+-- a collection of objects allowing the description and
+-- configuration of threshold alarms from a SNMPv2 entity
+-- acting in a dual role.
+
+snmpAlarm      OBJECT IDENTIFIER ::= { snmpM2MObjects 1 }
+
+-- This Alarm mechanism periodically takes statistical samples
+-- from variables available via SNMPv2 and compares them to
+-- thresholds that have been configured.  The alarm table
+-- stores configuration entries that each define a variable,
+-- polling period, and threshold parameters.  If a sample is
+-- found to cross the threshold values, an event is generated.
+-- Only variables that resolve to an ASN.1 primitive type of
+-- INTEGER (Integer32, Counter32, Gauge32, TimeTicks,
+-- Counter64, or UInteger32) may be monitored in this way.
+--
+-- This function has a hysteresis mechanism to limit the
+-- generation of events.  This mechanism generates one event
+-- as a threshold is crossed in the appropriate direction.  No
+-- more events are generated for that threshold until the
+-- opposite threshold is crossed.
+--
+-- In the case of sampling a deltaValue, an entity may
+-- implement this mechanism with more precision if it takes a
+-- delta sample twice per period, each time comparing the sum
+-- of the latest two samples to the threshold.  This allows
+-- the detection of threshold crossings that span the sampling
+-- boundary.  Note that this does not require any special
+-- configuration of the threshold value.  It is suggested that
+-- entities implement this more precise algorithm.
+--
+
+snmpAlarmNextIndex OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The index number of the next appropriate
+            unassigned entry in the snmpAlarmTable.  The value
+            0 indicates that no unassigned entries are
+            available.
+
+            A management station should create new entries in
+            the snmpAlarmTable using this algorithm: first,
+            issue a management protocol retrieval operation to
+            determine the value of snmpAlarmNextIndex; and,
+            second, issue a management protocol set operation
+            to create an instance of the snmpAlarmStatus
+            object setting its value to `createAndGo' or
+            `createAndWait' (as specified in the description
+            of the RowStatus textual convention)."
+    ::= { snmpAlarm 1 }
+
+snmpAlarmTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SnmpAlarmEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of snmpAlarm entries."
+    ::= { snmpAlarm 2 }
+
+snmpAlarmEntry OBJECT-TYPE
+    SYNTAX     SnmpAlarmEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of parameters that set up a periodic
+            sampling query to check for alarm conditions.  The
+            contextIdentity included in the INDEX clause is
+            the context to which the sampling queries are
+            directed."
+    INDEX      { contextIdentity, snmpAlarmIndex }
+    ::= { snmpAlarmTable 1 }
+
+SnmpAlarmEntry ::= SEQUENCE {
+    snmpAlarmIndex                    INTEGER,
+    snmpAlarmVariable                 InstancePointer,
+    snmpAlarmInterval                 Integer32,
+    snmpAlarmSampleType               INTEGER,
+    snmpAlarmValue                    Integer32,
+    snmpAlarmStartupAlarm             INTEGER,
+    snmpAlarmRisingThreshold          Integer32,
+    snmpAlarmFallingThreshold         Integer32,
+    snmpAlarmRisingEventIndex         INTEGER,
+    snmpAlarmFallingEventIndex        INTEGER,
+    snmpAlarmUnavailableEventIndex    INTEGER,
+    snmpAlarmStatus                   RowStatus
+}
+
+snmpAlarmIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            snmpAlarm table for a particular sampling context.
+            Each such entry defines a diagnostic sample at a
+            particular interval for a variable in the
+            particular context's object resources."
+    ::= { snmpAlarmEntry 1 }
+
+snmpAlarmVariable OBJECT-TYPE
+    SYNTAX     InstancePointer
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The object identifier of the particular variable
+            to be sampled.  Only variables that resolve to an
+            ASN.1 primitive type of INTEGER (Integer32,
+            Counter32, Gauge32, TimeTicks, Counter64, or
+            UInteger32) may be sampled.
+
+            If it is detected by an error response of
+            authorizationError, noSuchObject, or
+            noSuchInstance that the variable name of an
+            established snmpAlarmEntry is no longer available
+            in the sampling context, a single
+            snmpObjectUnavailableAlarm event is generated and
+            the status of this snmpAlarmEntry is set to
+            `destroy'.  Likewise, if the syntax of the
+            variable retrieved by the query is not Integer32,
+            Counter32, Gauge32, TimeTicks, Counter64, or
+            UInteger32, the same actions will be taken.
+
+            If the SNMPv2 entity acting in a dual role detects
+            that the sampled value can not be obtained due to
+            lack of response to management queries, it should
+            either:
+
+                 1) Set the status of this snmpAlarmEntry to
+                 `destroy', if it is determined that further
+                 communication is not possible;
+
+                 or,
+                 2) Delete the associated snmpAlarmValue
+                 instance (but not the entire conceptual row),
+                 and continue to attempt to sample the
+                 variable and recreate the associated
+                 snmpAlarmValue instance should communication
+                 be reestablished.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 2 }
+
+snmpAlarmInterval OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The interval in seconds over which the data is
+            sampled and compared with the rising and falling
+            thresholds.  When setting this object and the
+            sampling type is `deltaValue',  care should be
+            taken to ensure that the change during this
+            interval of the variable being sampled will not
+            exceed the (-2^31...2^31-1) range of the
+            snmpAlarmValue.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 3 }
+
+snmpAlarmSampleType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   absoluteValue(1),
+                   deltaValue(2)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The method of sampling the selected variable and
+            calculating the value to be compared against the
+            thresholds.  If the value of this object is
+            `absoluteValue', the value of the selected
+            variable at the end of the sampling interval will
+            be compared directly with both the
+            snmpAlarmRisingThreshold and the
+            snmpAlarmFallingThreshold values.  If the value of
+            this object is `deltaValue', the value of the
+            selected variable at the end of the sampling
+            interval will be subtracted from its value at the
+            end of the previous sampling interval, and the
+            difference compared with both the
+            snmpAlarmRisingThreshold and the
+            snmpAlarmFallingThreshold values.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    DEFVAL { deltaValue }
+    ::= { snmpAlarmEntry 4 }
+
+snmpAlarmValue OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of the statistic during the last
+            sampling period.  The value during the current
+            sampling period is not made available until the
+            period is completed.  If the value of the
+            statistic does not fit in the signed 32 bit
+            representation of this object, it should be
+            truncated in an implementation specific manner.
+
+            Note that if the associated snmpAlarmSampleType is
+            set to `deltaValue', the value of this object is
+            the difference in the sampled variable since the
+            last sample.
+
+            This object will be created by the SNMPv2 entity
+            acting in a dual role when this entry is set to
+            `active', and the first sampling period has
+            completed.  It may be created and deleted at other
+            times by the SNMPv2 entity acting in a dual role
+            when the sampled value can not be obtained, as
+            specified in the snmpAlarmVariable object."
+    ::= { snmpAlarmEntry 5 }
+
+snmpAlarmStartupAlarm OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   risingAlarm(1),
+                   fallingAlarm(2),
+                   risingOrFallingAlarm(3)
+               }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The alarm that may be sent when this entry is
+            first set to `active'.  If the first sample after
+            this entry becomes active is greater than or equal
+            to the risingThreshold and snmpAlarmStartupAlarm
+            is equal to `risingAlarm' or
+            `risingOrFallingAlarm', then a single rising alarm
+            will be generated.  If the first sample after this
+            entry becomes active is less than or equal to the
+            fallingThreshold and snmpAlarmStartupAlarm is
+            equal to `fallingAlarm' or `risingOrFallingAlarm',
+            then a single falling alarm will be generated.
+            Note that a snmpObjectUnavailableAlarm is sent
+            upon startup whenever it is applicable,
+            independent of the setting of
+            snmpAlarmStartupAlarm.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    DEFVAL { risingOrFallingAlarm }
+    ::= { snmpAlarmEntry 6 }
+
+snmpAlarmRisingThreshold OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "A threshold for the sampled statistic.  When the
+            current sampled value is greater than or equal to
+            this threshold, and the value at the last sampling
+            interval was less than this threshold, a single
+            event will be generated.  A single event will also
+            be generated if the first sample after this entry
+            becomes active is greater than or equal to this
+            threshold and the associated snmpAlarmStartupAlarm
+            is equal to `risingAlarm' or
+            `risingOrFallingAlarm'.
+
+            After a rising event is generated, another such
+            event will not be generated until the sampled
+            value falls below this threshold and reaches the
+            snmpAlarmFallingThreshold.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 7 }
+
+snmpAlarmFallingThreshold OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "A threshold for the sampled statistic.  When the
+            current sampled value is less than or equal to
+            this threshold, and the value at the last sampling
+            interval was greater than this threshold, a single
+            event will be generated.  A single event will also
+            be generated if the first sample after this entry
+            becomes active is less than or equal to this
+            threshold and the associated snmpAlarmStartupAlarm
+            is equal to `fallingAlarm' or
+            `risingOrFallingAlarm'.
+
+            After a falling event is generated, another such
+            event will not be generated until the sampled
+            value rises above this threshold and reaches the
+            snmpAlarmRisingThreshold.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 8 }
+
+snmpAlarmRisingEventIndex OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The index of the snmpEventEntry that is used when
+            a rising threshold is crossed.  The snmpEventEntry
+            identified by a particular value of this index is
+            the same as identified by the same value of the
+            snmpEventIndex object.  If there is no
+            corresponding entry in the snmpEventTable, then no
+            association exists.  In particular, if this value
+            is zero, no associated event will be generated, as
+            zero is not a valid snmpEventIndex.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 9 }
+
+snmpAlarmFallingEventIndex OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The index of the snmpEventEntry that is used when
+            a falling threshold is crossed.  The
+            snmpEventEntry identified by a particular value of
+            this index is the same as identified by the same
+            value of the snmpEventIndex object.  If there is
+            no corresponding entry in the snmpEventTable, then
+            no association exists.  In particular, if this
+            value is zero, no associated event will be
+            generated, as zero is not a valid snmpEventIndex.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 10 }
+
+snmpAlarmUnavailableEventIndex OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The index of the snmpEventEntry that is used when
+            a variable becomes unavailable.  The
+            snmpEventEntry identified by a particular value of
+            this index is the same as identified by the same
+            value of the snmpEventIndex object.  If there is
+            no corresponding entry in the snmpEventTable, then
+            no association exists.  In particular, if this
+            value is zero, no associated event will be
+            generated, as zero is not a valid snmpEventIndex.
+
+            An attempt to modify this object will fail with an
+            `inconsistentValue' error if the associated
+            snmpAlarmStatus object would be equal to `active'
+            both before and after the modification attempt."
+    ::= { snmpAlarmEntry 11 }
+
+snmpAlarmStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this snmpAlarm entry.  This object
+            may not be set to `active' unless the following
+            columnar objects exist in this row:
+            snmpAlarmVariable, snmpAlarmInterval,
+            snmpAlarmSampleType, snmpAlarmStartupAlarm,
+            snmpAlarmRisingThreshold,
+            snmpAlarmFallingThreshold,
+            snmpAlarmRisingEventIndex,
+            snmpAlarmFallingEventIndex, and
+            snmpAlarmUnavailableEventIndex."
+    ::= { snmpAlarmEntry 12 }
+
+-- alarm-related notifications
+
+snmpAlarmNotifications
+               OBJECT IDENTIFIER ::= { snmpAlarm 3 }
+
+snmpRisingAlarm NOTIFICATION-TYPE
+    OBJECTS { snmpAlarmVariable, snmpAlarmSampleType,
+              snmpAlarmValue, snmpAlarmRisingThreshold }
+    STATUS  current
+    DESCRIPTION
+            "An event that is generated when an alarm entry
+            crosses its rising threshold.  The instances of
+            those objects contained within the varbind list
+            are those of the alarm entry which generated this
+            event."
+    ::= { snmpAlarmNotifications 1 }
+
+snmpFallingAlarm NOTIFICATION-TYPE
+    OBJECTS { snmpAlarmVariable, snmpAlarmSampleType,
+              snmpAlarmValue, snmpAlarmFallingThreshold }
+    STATUS  current
+    DESCRIPTION
+            "An event that is generated when an alarm entry
+            crosses its falling threshold.  The instances of
+            those objects contained within the varbind list
+            are those of the alarm entry which generated this
+            event."
+    ::= { snmpAlarmNotifications 2 }
+
+snmpObjectUnavailableAlarm NOTIFICATION-TYPE
+    OBJECTS { snmpAlarmVariable }
+    STATUS  current
+    DESCRIPTION
+            "An event that is generated when a variable
+            monitored by an alarm entry becomes unavailable.
+            The instance of snmpAlarmVariable contained within
+            the varbind list is the one associated with the
+            alarm entry which generated this event."
+    ::= { snmpAlarmNotifications 3 }
+
+-- the event group
+--
+-- a collection of objects allowing the description and
+-- configuration of events from a SNMPv2 entity acting
+-- in a dual role.
+
+snmpEvent      OBJECT IDENTIFIER ::= { snmpM2MObjects 2 }
+
+-- The snmpEvent table defines the set of events generated on
+-- a SNMPv2 entity acting in a dual role.  Each entry in the
+-- snmpEventTable associates an event type with the
+-- notification method and associated parameters.  Some
+-- snmpEvent entries are fired by an associated condition in
+-- the snmpAlarmTable.  Others are fired on behalf of
+-- conditions defined in the NOTIFICATION-TYPE macro.  The
+-- snmpNotificationTable defines notifications that should
+-- occur when an associated event is fired.
+
+snmpEventNextIndex OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The index number of the next appropriate
+            unassigned entry in the snmpEventTable.  The value
+            0 indicates that no unassigned entries are
+            available.
+
+            A management station should create new entries in
+            the snmpEventTable using this algorithm: first,
+            issue a management protocol retrieval operation to
+            determine the value of snmpEventNextIndex; and,
+            second, issue a management protocol set operation
+            to create an instance of the snmpEventStatus
+            object setting its value to `createAndWait' or
+            'createAndGo'."
+    ::= { snmpEvent 1 }
+
+snmpEventTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SnmpEventEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of events."
+    ::= { snmpEvent 2 }
+
+snmpEventEntry OBJECT-TYPE
+    SYNTAX     SnmpEventEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A set of parameters that describe an event that
+            is generated when certain conditions are met."
+    INDEX      { snmpEventIndex }
+    ::= { snmpEventTable 1 }
+
+SnmpEventEntry ::= SEQUENCE {
+    snmpEventIndex          INTEGER,
+    snmpEventID             OBJECT IDENTIFIER,
+    snmpEventDescription    DisplayString,
+    snmpEventEvents         Counter32,
+    snmpEventLastTimeSent   TimeStamp,
+    snmpEventStatus         RowStatus
+}
+
+snmpEventIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..65535)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An index that uniquely identifies an entry in the
+            snmpEvent table.  Each such entry defines an event
+            generated when the appropriate conditions occur."
+    ::= { snmpEventEntry 1 }
+
+snmpEventID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The authoritative identification of the event
+            type generated by this entry.  This variable
+            occurs as the second varbind of an InformRequest-
+            PDU.  If this OBJECT IDENTIFIER maps to a
+            NOTIFICATION-TYPE the sender will place the
+            objects listed in the NOTIFICATION-TYPE in the
+            varbind list."
+    ::= { snmpEventEntry 2 }
+
+snmpEventDescription OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..127))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "A comment describing this snmpEvent entry."
+    ::= { snmpEventEntry 3 }
+
+snmpEventEvents OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of events caused by event generators
+            associated with this snmpEvent entry."
+    ::= { snmpEventEntry 4 }
+
+snmpEventLastTimeSent OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at the time this snmpEvent
+            entry last generated an event.  If this entry has
+            not generated any events, this value will be
+            zero."
+    DEFVAL { 0 }
+    ::= { snmpEventEntry 5 }
+
+snmpEventStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this snmpEvent entry.  This object
+            may not be set to `active' unless the following
+            columnar objects exist in this row: snmpEventID,
+            snmpEventDescription, snmpEventEvents, and
+            snmpEventLastTimeSent.
+
+            Setting an instance of this object to the value
+            'destroy' has the effect of invalidating any/all
+            entries in the snmpEventTable, and the
+            snmpEventNotifyTable which reference the
+            corresponding snmpEventEntry."
+    ::= { snmpEventEntry 6 }
+
+snmpEventNotifyMinInterval OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The minimum interval that the SNMPv2 entity
+            acting in a dual role will wait before
+            retransmitting an InformRequest-PDU.  This object
+            specifies the minimal value supported by the
+            SNMPv2 entity acting in a dual role, based on
+            resource or implementation constraints.
+
+            For a particular entry in the
+            snmpEventNotifyTable, if the associated
+            snmpEventNotifyIntervalRequested variable is
+            greater than this object, the
+            snmpEventNotifyIntervalRequested value shall be
+            used as the minimum interval for retransmissions
+            of InformRequest-PDUs sent on behalf of that
+            entry."
+    ::= { snmpEvent 3 }
+
+snmpEventNotifyMaxRetransmissions OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of time that the SNMPv2 entity
+            acting in a dual role will retransmit an
+            InformRequest-PDU.  This object specifies the
+            maximal value supported by the SNMPv2 entity
+            acting in a dual role, based on resource or
+            implementation constraints.
+
+            For a particular entry in the
+            snmpEventNotifyTable, if the associated
+            snmpEventNotifyRetransmissionsRequested variable
+            is less than this object, the
+            snmpEventNotifyRetransmissionsRequested value
+            shall be used as the retransmission count for
+            InformRequest-PDUs sent on behalf of that entry."
+    ::= { snmpEvent 4 }
+
+-- The snmpEventNotifyTable is used to configure the
+
+-- destination and type of notifications sent by a SNMPv2
+-- entity acting in a manager role when a particular event
+-- is triggered.
+
+snmpEventNotifyTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SnmpEventNotifyEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of protocol configuration entries for
+            event notifications from this entity."
+    ::= { snmpEvent 5 }
+
+snmpEventNotifyEntry OBJECT-TYPE
+    SYNTAX     SnmpEventNotifyEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A set of parameters that describe the type and
+            destination of InformRequest-PDUs sent for a
+            particular event.  The snmpEventIndex in this
+            entry's INDEX clause identifies the snmpEventEntry
+            which, when triggered, will generate a
+            notification as configured in this entry.  The
+            contextIdentity in this entry's INDEX clause
+            identifies the context to which a notification
+            will be sent."
+    INDEX      { snmpEventIndex, contextIdentity }
+    ::= { snmpEventNotifyTable 1 }
+
+SnmpEventNotifyEntry ::= SEQUENCE {
+    snmpEventNotifyIntervalRequested        Integer32,
+    snmpEventNotifyRetransmissionsRequested Integer32,
+    snmpEventNotifyLifetime                 Integer32,
+    snmpEventNotifyStatus                   RowStatus
+}
+
+snmpEventNotifyIntervalRequested OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The requested interval for retransmission of
+            Inform PDUs generated on the behalf of this entry.
+
+            This variable will be the actual interval used
+            unless the snmpEventNotifyMinInterval is greater
+            than this object, in which case the interval shall
+            be equal to snmpEventNotifyMinInterval."
+    DEFVAL { 30 }
+    ::= { snmpEventNotifyEntry 1 }
+
+snmpEventNotifyRetransmissionsRequested OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The requested number of retransmissions of an
+            InformRequest-PDU generated on behalf of this
+            entry.
+
+            This variable will be the actual number of
+            retransmissions used unless the
+            snmpEventNotifyMaxRetransmissions is less than
+            this object, in which case the retransmission
+            count shall be equal to
+            snmpEventNotifyMaxRetransmissions."
+    DEFVAL { 5 }
+    ::= { snmpEventNotifyEntry 2 }
+
+snmpEventNotifyLifetime OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds this entry shall live until
+            the corresponding instance of
+            snmpEventNotifyStatus is set to 'destroy'.  This
+            value shall count down to zero, at which time the
+            corresponding instance of snmpEventNotifyStatus
+            will be set to 'destroy'.  Any management station
+            that is using this entry must periodically refresh
+            this value to ensure the continued delivery of
+            events."
+    DEFVAL { 86400 }
+    ::= { snmpEventNotifyEntry 3 }
+
+snmpEventNotifyStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The state of this snmpEventNotifyEntry.  This
+            object may not be set to `active' unless the
+            following columnar objects exist in this row:
+            snmpEventNotifyIntervalRequested,
+            snmpEventNotifyRetransmissionsRequested, and
+            snmpEventNotifyLifetime."
+    ::= { snmpEventNotifyEntry 4 }
+
+-- conformance information
+
+snmpM2MConformance
+               OBJECT IDENTIFIER ::= { snmpM2M 2 }
+
+snmpM2MCompliances
+               OBJECT IDENTIFIER ::= { snmpM2MConformance 1 }
+snmpM2MGroups  OBJECT IDENTIFIER ::= { snmpM2MConformance 2 }
+
+-- compliance statements
+
+snmpM2MCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities
+            which implement the Manager-to-Manager MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { snmpAlarmGroup, snmpEventGroup }
+    ::= { snmpM2MCompliances 1 }
+
+-- units of conformance
+
+snmpAlarmGroup OBJECT-GROUP
+    OBJECTS { snmpAlarmNextIndex,
+              snmpAlarmVariable, snmpAlarmInterval,
+              snmpAlarmSampleType, snmpAlarmValue,
+              snmpAlarmStartupAlarm, snmpAlarmRisingThreshold,
+              snmpAlarmFallingThreshold,
+              snmpAlarmRisingEventIndex,
+              snmpAlarmFallingEventIndex,
+              snmpAlarmUnavailableEventIndex,
+              snmpAlarmStatus }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects allowing the description
+            and configuration of threshold alarms from a
+            SNMPv2 entity acting in a dual role."
+    ::= { snmpM2MGroups 1 }
+
+snmpEventGroup OBJECT-GROUP
+    OBJECTS { snmpEventNextIndex,
+              snmpEventID, snmpEventDescription,
+              snmpEventEvents, snmpEventLastTimeSent,
+              snmpEventStatus, snmpEventNotifyMinInterval,
+              snmpEventNotifyMaxRetransmissions,
+              snmpEventNotifyIntervalRequested,
+              snmpEventNotifyRetransmissionsRequested,
+              snmpEventNotifyLifetime, snmpEventNotifyStatus }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects allowing the description
+            and configuration of events from a SNMPv2 entity
+            acting in a dual role."
+    ::= { snmpM2MGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/SNMPv2-MIB.mib b/snmp_builder/mibs/SNMPv2-MIB.mib
new file mode 100644
index 0000000..8c82830
--- /dev/null
+++ b/snmp_builder/mibs/SNMPv2-MIB.mib
@@ -0,0 +1,854 @@
+SNMPv2-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    TimeTicks, Counter32, snmpModules, mib-2
+        FROM SNMPv2-SMI
+    DisplayString, TestAndIncr, TimeStamp
+
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF;
+
+snmpMIB MODULE-IDENTITY
+    LAST-UPDATED "200210160000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+            "WG-EMail:   snmpv3@lists.tislabs.com
+             Subscribe:  snmpv3-request@lists.tislabs.com
+
+             Co-Chair:   Russ Mundy
+                         Network Associates Laboratories
+             postal:     15204 Omega Drive, Suite 300
+                         Rockville, MD 20850-4601
+                         USA
+             EMail:      mundy@tislabs.com
+             phone:      +1 301 947-7107
+
+             Co-Chair:   David Harrington
+                         Enterasys Networks
+             postal:     35 Industrial Way
+                         P. O. Box 5005
+                         Rochester, NH 03866-5005
+                         USA
+             EMail:      dbh@enterasys.com
+             phone:      +1 603 337-2614
+
+             Editor:     Randy Presuhn
+                         BMC Software, Inc.
+             postal:     2141 North First Street
+                         San Jose, CA 95131
+                         USA
+             EMail:      randy_presuhn@bmc.com
+             phone:      +1 408 546-1006"
+    DESCRIPTION
+            "The MIB module for SNMP entities.
+
+             Copyright (C) The Internet Society (2002). This
+             version of this MIB module is part of RFC 3418;
+             see the RFC itself for full legal notices.
+            "
+    REVISION      "200210160000Z"
+    DESCRIPTION
+            "This revision of this MIB module was published as
+             RFC 3418."
+    REVISION      "199511090000Z"
+    DESCRIPTION
+            "This revision of this MIB module was published as
+             RFC 1907."
+    REVISION      "199304010000Z"
+    DESCRIPTION
+            "The initial revision of this MIB module was published
+            as RFC 1450."
+    ::= { snmpModules 1 }
+
+snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }
+
+--  ::= { snmpMIBObjects 1 }        this OID is obsolete
+--  ::= { snmpMIBObjects 2 }        this OID is obsolete
+--  ::= { snmpMIBObjects 3 }        this OID is obsolete
+
+-- the System group
+--
+-- a collection of objects common to all managed systems.
+
+system   OBJECT IDENTIFIER ::= { mib-2 1 }
+
+sysDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual description of the entity.  This value should
+            include the full name and version identification of
+            the system's hardware type, software operating-system,
+            and networking software."
+    ::= { system 1 }
+
+sysObjectID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor's authoritative identification of the
+            network management subsystem contained in the entity.
+            This value is allocated within the SMI enterprises
+            subtree (1.3.6.1.4.1) and provides an easy and
+            unambiguous means for determining `what kind of box' is
+            being managed.  For example, if vendor `Flintstones,
+            Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
+            it could assign the identifier 1.3.6.1.4.1.424242.1.1
+            to its `Fred Router'."
+    ::= { system 2 }
+
+sysUpTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The time (in hundredths of a second) since the
+            network management portion of the system was last
+            re-initialized."
+    ::= { system 3 }
+
+sysContact OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The textual identification of the contact person for
+            this managed node, together with information on how
+            to contact this person.  If no contact information is
+            known, the value is the zero-length string."
+    ::= { system 4 }
+
+sysName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "An administratively-assigned name for this managed
+            node.  By convention, this is the node's fully-qualified
+            domain name.  If the name is unknown, the value is
+            the zero-length string."
+    ::= { system 5 }
+
+sysLocation OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The physical location of this node (e.g., 'telephone
+            closet, 3rd floor').  If the location is unknown, the
+            value is the zero-length string."
+    ::= { system 6 }
+
+sysServices OBJECT-TYPE
+    SYNTAX      INTEGER (0..127)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value which indicates the set of services that this
+            entity may potentially offer.  The value is a sum.
+
+            This sum initially takes the value zero. Then, for
+            each layer, L, in the range 1 through 7, that this node
+            performs transactions for, 2 raised to (L - 1) is added
+            to the sum.  For example, a node which performs only
+            routing functions would have a value of 4 (2^(3-1)).
+            In contrast, a node which is a host offering application
+            services would have a value of 72 (2^(4-1) + 2^(7-1)).
+            Note that in the context of the Internet suite of
+            protocols, values should be calculated accordingly:
+
+                 layer      functionality
+                   1        physical (e.g., repeaters)
+                   2        datalink/subnetwork (e.g., bridges)
+                   3        internet (e.g., supports the IP)
+                   4        end-to-end  (e.g., supports the TCP)
+                   7        applications (e.g., supports the SMTP)
+
+            For systems including OSI protocols, layers 5 and 6
+            may also be counted."
+    ::= { system 7 }
+
+-- object resource information
+--
+-- a collection of objects which describe the SNMP entity's
+-- (statically and dynamically configurable) support of
+-- various MIB modules.
+
+sysORLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the most recent
+            change in state or value of any instance of sysORID."
+    ::= { system 8 }
+
+sysORTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SysOREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the capabilities of
+            the local SNMP application acting as a command
+            responder with respect to various MIB modules.
+            SNMP entities having dynamically-configurable support
+            of MIB modules will have a dynamically-varying number
+            of conceptual rows."
+    ::= { system 9 }
+
+sysOREntry OBJECT-TYPE
+    SYNTAX     SysOREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the sysORTable."
+    INDEX      { sysORIndex }
+    ::= { sysORTable 1 }
+
+SysOREntry ::= SEQUENCE {
+    sysORIndex     INTEGER,
+    sysORID        OBJECT IDENTIFIER,
+    sysORDescr     DisplayString,
+    sysORUpTime    TimeStamp
+}
+
+sysORIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The auxiliary variable used for identifying instances
+            of the columnar objects in the sysORTable."
+    ::= { sysOREntry 1 }
+
+sysORID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An authoritative identification of a capabilities
+            statement with respect to various MIB modules supported
+            by the local SNMP application acting as a command
+            responder."
+    ::= { sysOREntry 2 }
+
+sysORDescr OBJECT-TYPE
+    SYNTAX     DisplayString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A textual description of the capabilities identified
+            by the corresponding instance of sysORID."
+    ::= { sysOREntry 3 }
+
+sysORUpTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at the time this conceptual
+            row was last instantiated."
+    ::= { sysOREntry 4 }
+
+-- the SNMP group
+--
+-- a collection of objects providing basic instrumentation and
+-- control of an SNMP entity.
+
+snmp     OBJECT IDENTIFIER ::= { mib-2 11 }
+
+snmpInPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of messages delivered to the SNMP
+            entity from the transport service."
+    ::= { snmp 1 }
+
+snmpInBadVersions OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of SNMP messages which were delivered
+            to the SNMP entity and were for an unsupported SNMP
+            version."
+    ::= { snmp 3 }
+
+snmpInBadCommunityNames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of community-based SNMP messages (for
+           example,  SNMPv1) delivered to the SNMP entity which
+           used an SNMP community name not known to said entity.
+           Also, implementations which authenticate community-based
+           SNMP messages using check(s) in addition to matching
+           the community name (for example, by also checking
+           whether the message originated from a transport address
+           allowed to use a specified community name) MAY include
+           in this value the number of messages which failed the
+           additional check(s).  It is strongly RECOMMENDED that
+
+           the documentation for any security model which is used
+           to authenticate community-based SNMP messages specify
+           the precise conditions that contribute to this value."
+    ::= { snmp 4 }
+
+snmpInBadCommunityUses OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of community-based SNMP messages (for
+           example, SNMPv1) delivered to the SNMP entity which
+           represented an SNMP operation that was not allowed for
+           the SNMP community named in the message.  The precise
+           conditions under which this counter is incremented
+           (if at all) depend on how the SNMP entity implements
+           its access control mechanism and how its applications
+           interact with that access control mechanism.  It is
+           strongly RECOMMENDED that the documentation for any
+           access control mechanism which is used to control access
+           to and visibility of MIB instrumentation specify the
+           precise conditions that contribute to this value."
+    ::= { snmp 5 }
+
+snmpInASNParseErrs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of ASN.1 or BER errors encountered by
+            the SNMP entity when decoding received SNMP messages."
+    ::= { snmp 6 }
+
+snmpEnableAuthenTraps OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Indicates whether the SNMP entity is permitted to
+            generate authenticationFailure traps.  The value of this
+            object overrides any configuration information; as such,
+            it provides a means whereby all authenticationFailure
+            traps may be disabled.
+
+            Note that it is strongly recommended that this object
+            be stored in non-volatile memory so that it remains
+            constant across re-initializations of the network
+            management system."
+    ::= { snmp 30 }
+
+snmpSilentDrops OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of Confirmed Class PDUs (such as
+           GetRequest-PDUs, GetNextRequest-PDUs,
+           GetBulkRequest-PDUs, SetRequest-PDUs, and
+           InformRequest-PDUs) delivered to the SNMP entity which
+           were silently dropped because the size of a reply
+           containing an alternate Response Class PDU (such as a
+           Response-PDU) with an empty variable-bindings field
+           was greater than either a local constraint or the
+           maximum message size associated with the originator of
+           the request."
+    ::= { snmp 31 }
+
+snmpProxyDrops OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of Confirmed Class PDUs
+            (such as GetRequest-PDUs, GetNextRequest-PDUs,
+            GetBulkRequest-PDUs, SetRequest-PDUs, and
+            InformRequest-PDUs) delivered to the SNMP entity which
+            were silently dropped because the transmission of
+            the (possibly translated) message to a proxy target
+            failed in a manner (other than a time-out) such that
+            no Response Class PDU (such as a Response-PDU) could
+            be returned."
+    ::= { snmp 32 }
+
+-- information for notifications
+--
+-- a collection of objects which allow the SNMP entity, when
+-- supporting a notification originator application,
+-- to be configured to generate SNMPv2-Trap-PDUs.
+
+snmpTrap       OBJECT IDENTIFIER ::= { snmpMIBObjects 4 }
+
+snmpTrapOID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS accessible-for-notify
+    STATUS     current
+    DESCRIPTION
+            "The authoritative identification of the notification
+            currently being sent.  This variable occurs as
+            the second varbind in every SNMPv2-Trap-PDU and
+            InformRequest-PDU."
+    ::= { snmpTrap 1 }
+
+--  ::= { snmpTrap 2 }   this OID is obsolete
+
+snmpTrapEnterprise OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS accessible-for-notify
+    STATUS     current
+    DESCRIPTION
+            "The authoritative identification of the enterprise
+            associated with the trap currently being sent.  When an
+            SNMP proxy agent is mapping an RFC1157 Trap-PDU
+            into a SNMPv2-Trap-PDU, this variable occurs as the
+            last varbind."
+    ::= { snmpTrap 3 }
+
+--  ::= { snmpTrap 4 }   this OID is obsolete
+
+-- well-known traps
+
+snmpTraps      OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }
+
+coldStart NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+            "A coldStart trap signifies that the SNMP entity,
+            supporting a notification originator application, is
+            reinitializing itself and that its configuration may
+            have been altered."
+    ::= { snmpTraps 1 }
+
+warmStart NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+            "A warmStart trap signifies that the SNMP entity,
+            supporting a notification originator application,
+            is reinitializing itself such that its configuration
+            is unaltered."
+    ::= { snmpTraps 2 }
+
+-- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }
+-- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }
+-- are defined in RFC 2863 [RFC2863]
+
+authenticationFailure NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+            "An authenticationFailure trap signifies that the SNMP
+             entity has received a protocol message that is not
+             properly authenticated.  While all implementations
+             of SNMP entities MAY be capable of generating this
+             trap, the snmpEnableAuthenTraps object indicates
+             whether this trap will be generated."
+    ::= { snmpTraps 5 }
+
+-- Note the egpNeighborLoss notification is defined
+-- as { snmpTraps 6 } in RFC 1213
+
+-- the set group
+--
+-- a collection of objects which allow several cooperating
+-- command generator applications to coordinate their use of the
+-- set operation.
+
+snmpSet        OBJECT IDENTIFIER ::= { snmpMIBObjects 6 }
+
+snmpSetSerialNo OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "An advisory lock used to allow several cooperating
+            command generator applications to coordinate their
+            use of the SNMP set operation.
+
+            This object is used for coarse-grain coordination.
+            To achieve fine-grain coordination, one or more similar
+            objects might be defined within each MIB group, as
+            appropriate."
+    ::= { snmpSet 1 }
+
+-- conformance information
+
+snmpMIBConformance
+               OBJECT IDENTIFIER ::= { snmpMIB 2 }
+
+snmpMIBCompliances
+               OBJECT IDENTIFIER ::= { snmpMIBConformance 1 }
+snmpMIBGroups  OBJECT IDENTIFIER ::= { snmpMIBConformance 2 }
+
+-- compliance statements
+
+--    ::= { snmpMIBCompliances 1 }      this OID is obsolete
+snmpBasicCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities which
+            implement the SNMPv2 MIB.
+
+            This compliance statement is replaced by
+            snmpBasicComplianceRev2."
+    MODULE  -- this module
+        MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
+                           snmpBasicNotificationsGroup }
+
+        GROUP   snmpCommunityGroup
+        DESCRIPTION
+            "This group is mandatory for SNMPv2 entities which
+            support community-based authentication."
+    ::= { snmpMIBCompliances 2 }
+
+snmpBasicComplianceRev2 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which
+            implement this MIB module."
+    MODULE  -- this module
+        MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
+                           snmpBasicNotificationsGroup }
+
+        GROUP   snmpCommunityGroup
+        DESCRIPTION
+            "This group is mandatory for SNMP entities which
+            support community-based authentication."
+
+        GROUP   snmpWarmStartNotificationGroup
+        DESCRIPTION
+            "This group is mandatory for an SNMP entity which
+            supports command responder applications, and is
+            able to reinitialize itself such that its
+            configuration is unaltered."
+    ::= { snmpMIBCompliances 3 }
+
+-- units of conformance
+
+--  ::= { snmpMIBGroups 1 }           this OID is obsolete
+--  ::= { snmpMIBGroups 2 }           this OID is obsolete
+--  ::= { snmpMIBGroups 3 }           this OID is obsolete
+
+--  ::= { snmpMIBGroups 4 }           this OID is obsolete
+
+snmpGroup OBJECT-GROUP
+    OBJECTS { snmpInPkts,
+              snmpInBadVersions,
+              snmpInASNParseErrs,
+              snmpSilentDrops,
+              snmpProxyDrops,
+              snmpEnableAuthenTraps }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing basic instrumentation
+            and control of an SNMP entity."
+    ::= { snmpMIBGroups 8 }
+
+snmpCommunityGroup OBJECT-GROUP
+    OBJECTS { snmpInBadCommunityNames,
+              snmpInBadCommunityUses }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing basic instrumentation
+            of a SNMP entity which supports community-based
+            authentication."
+    ::= { snmpMIBGroups 9 }
+
+snmpSetGroup OBJECT-GROUP
+    OBJECTS { snmpSetSerialNo }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects which allow several cooperating
+            command generator applications to coordinate their
+            use of the set operation."
+    ::= { snmpMIBGroups 5 }
+
+systemGroup OBJECT-GROUP
+    OBJECTS { sysDescr, sysObjectID, sysUpTime,
+              sysContact, sysName, sysLocation,
+              sysServices,
+              sysORLastChange, sysORID,
+              sysORUpTime, sysORDescr }
+    STATUS  current
+    DESCRIPTION
+            "The system group defines objects which are common to all
+            managed systems."
+    ::= { snmpMIBGroups 6 }
+
+snmpBasicNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { coldStart, authenticationFailure }
+    STATUS        current
+    DESCRIPTION
+       "The basic notifications implemented by an SNMP entity
+        supporting command responder applications."
+    ::= { snmpMIBGroups 7 }
+
+snmpWarmStartNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS { warmStart }
+   STATUS        current
+   DESCRIPTION
+     "An additional notification for an SNMP entity supporting
+     command responder applications, if it is able to reinitialize
+     itself such that its configuration is unaltered."
+  ::= { snmpMIBGroups 11 }
+
+snmpNotificationGroup OBJECT-GROUP
+    OBJECTS { snmpTrapOID, snmpTrapEnterprise }
+    STATUS  current
+    DESCRIPTION
+            "These objects are required for entities
+            which support notification originator applications."
+    ::= { snmpMIBGroups 12 }
+
+-- definitions in RFC 1213 made obsolete by the inclusion of a
+-- subset of the snmp group in this MIB
+
+snmpOutPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Messages which were
+            passed from the SNMP protocol entity to the
+            transport service."
+    ::= { snmp 2 }
+
+-- { snmp 7 } is not used
+
+snmpInTooBigs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field was
+            `tooBig'."
+    ::= { snmp 8 }
+
+snmpInNoSuchNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field was
+            `noSuchName'."
+    ::= { snmp 9 }
+
+snmpInBadValues OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field was
+            `badValue'."
+    ::= { snmp 10 }
+
+snmpInReadOnlys OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number valid SNMP PDUs which were delivered
+            to the SNMP protocol entity and for which the value
+            of the error-status field was `readOnly'.  It should
+            be noted that it is a protocol error to generate an
+            SNMP PDU which contains the value `readOnly' in the
+            error-status field, as such this object is provided
+            as a means of detecting incorrect implementations of
+            the SNMP."
+    ::= { snmp 11 }
+
+snmpInGenErrs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were delivered
+            to the SNMP protocol entity and for which the value
+            of the error-status field was `genErr'."
+    ::= { snmp 12 }
+
+snmpInTotalReqVars OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of MIB objects which have been
+            retrieved successfully by the SNMP protocol entity
+            as the result of receiving valid SNMP Get-Request
+            and Get-Next PDUs."
+    ::= { snmp 13 }
+
+snmpInTotalSetVars OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of MIB objects which have been
+            altered successfully by the SNMP protocol entity as
+            the result of receiving valid SNMP Set-Request PDUs."
+    ::= { snmp 14 }
+
+snmpInGetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Request PDUs which
+            have been accepted and processed by the SNMP
+            protocol entity."
+    ::= { snmp 15 }
+
+snmpInGetNexts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Next PDUs which have been
+            accepted and processed by the SNMP protocol entity."
+    ::= { snmp 16 }
+
+snmpInSetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Set-Request PDUs which
+            have been accepted and processed by the SNMP protocol
+            entity."
+    ::= { snmp 17 }
+
+snmpInGetResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Response PDUs which
+            have been accepted and processed by the SNMP protocol
+            entity."
+    ::= { snmp 18 }
+
+snmpInTraps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Trap PDUs which have been
+            accepted and processed by the SNMP protocol entity."
+    ::= { snmp 19 }
+
+snmpOutTooBigs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status field was `tooBig.'"
+    ::= { snmp 20 }
+
+snmpOutNoSuchNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status was `noSuchName'."
+    ::= { snmp 21 }
+
+snmpOutBadValues OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status field was `badValue'."
+    ::= { snmp 22 }
+
+-- { snmp 23 } is not used
+
+snmpOutGenErrs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status field was `genErr'."
+    ::= { snmp 24 }
+
+snmpOutGetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Request PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 25 }
+
+snmpOutGetNexts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Next PDUs which have
+            been generated by the SNMP protocol entity."
+    ::= { snmp 26 }
+
+snmpOutSetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Set-Request PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 27 }
+
+snmpOutGetResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Response PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 28 }
+
+snmpOutTraps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Trap PDUs which have
+            been generated by the SNMP protocol entity."
+    ::= { snmp 29 }
+
+snmpObsoleteGroup OBJECT-GROUP
+    OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
+              snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
+              snmpInTotalReqVars, snmpInTotalSetVars,
+              snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
+              snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
+              snmpOutNoSuchNames, snmpOutBadValues,
+              snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
+              snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
+              }
+    STATUS  obsolete
+    DESCRIPTION
+            "A collection of objects from RFC 1213 made obsolete
+            by this MIB module."
+    ::= { snmpMIBGroups 10 }
+
+END
diff --git a/snmp_builder/mibs/SNMPv2-PARTY-MIB.mib b/snmp_builder/mibs/SNMPv2-PARTY-MIB.mib
new file mode 100644
index 0000000..88c2985
--- /dev/null
+++ b/snmp_builder/mibs/SNMPv2-PARTY-MIB.mib
@@ -0,0 +1,1410 @@
+   SNMPv2-PARTY-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, snmpModules,
+           UInteger32
+           FROM SNMPv2-SMI
+       TEXTUAL-CONVENTION, RowStatus, TruthValue
+           FROM SNMPv2-TC
+       MODULE-COMPLIANCE, OBJECT-GROUP
+           FROM SNMPv2-CONF;
+
+   partyMIB MODULE-IDENTITY
+       LAST-UPDATED "9304010000Z"
+       ORGANIZATION "IETF SNMP Security Working Group"
+       CONTACT-INFO
+               "        Keith McCloghrie
+
+                Postal: Hughes LAN Systems
+                        1225 Charleston Road
+                        Mountain View, CA  94043
+                        US
+
+                   Tel: +1 415 966 7934
+                   Fax: +1 415 960 3738
+
+                E-mail: kzm@hls.com"
+       DESCRIPTION
+               "The MIB module describing SNMPv2 parties."
+       ::= { snmpModules 3 }
+
+   -- textual conventions
+
+   Party ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "Denotes a SNMPv2 party identifier.
+
+               Note that agents may impose implementation
+               limitations on the length of OIDs used to identify
+               Parties. As such, management stations creating
+               new parties should be aware that using an
+               excessively long OID may result in the agent
+               refusing to perform the set operation and instead
+               returning the appropriate error response, e.g.,
+               noCreation."
+       SYNTAX       OBJECT IDENTIFIER
+
+   TAddress ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "Denotes a transport service address.
+
+               For snmpUDPDomain, a TAddress is 6 octets long,
+               the initial 4 octets containing the IP-address in
+               network-byte order and the last 2 containing the
+               UDP port in network-byte order.  Consult [5] for
+               further information on snmpUDPDomain."
+       SYNTAX       OCTET STRING
+
+   Clock ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "A party's authentication clock - a non-negative
+               integer which is incremented as specified/allowed
+               by the party's Authentication Protocol.
+
+               For noAuth, a party's authentication clock is
+               unused and its value is undefined.
+
+               For v2md5AuthProtocol, a party's authentication
+               clock is a relative clock with 1-second
+               granularity."
+       SYNTAX       UInteger32
+
+   Context ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "Denotes a SNMPv2 context identifier.
+
+               Note that agents may impose implementation
+               limitations on the length of OIDs used to identify
+               Contexts. As such, management stations creating new
+               contexts should be aware that using an excessively
+               long OID may result in the agent refusing to
+               perform the set operation and instead returning
+               the appropriate error response, e.g., noCreation."
+       SYNTAX       OBJECT IDENTIFIER
+
+   StorageType ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "Describes the memory realization of a conceptual
+               row.  A row which is volatile(2) is lost upon
+               reboot.  A row which is nonVolatile(3) is backed
+               up by stable storage.  A row which is permanent(4)
+               cannot be changed nor deleted."
+       SYNTAX       INTEGER {
+                        other(1),       -- eh?
+                        volatile(2),    -- e.g., in RAM
+                        nonVolatile(3), -- e.g., in NVRAM
+                        permanent(4)    -- e.g., in ROM
+                    }
+
+   -- administrative assignments
+
+   partyAdmin     OBJECT IDENTIFIER ::= { partyMIB 1 }
+
+   -- definitions of security protocols
+
+   partyProtocols OBJECT IDENTIFIER ::= { partyAdmin 1 }
+
+   -- the protocol without authentication
+   noAuth         OBJECT IDENTIFIER ::= { partyProtocols 1 }
+
+   -- the protocol without privacy
+   noPriv         OBJECT IDENTIFIER ::= { partyProtocols 2 }
+
+   -- the DES Privacy Protocol [4]
+   desPrivProtocol
+                  OBJECT IDENTIFIER ::= { partyProtocols 3 }
+
+   -- the MD5 Authentication Protocol [4]
+   v2md5AuthProtocol
+                  OBJECT IDENTIFIER ::= { partyProtocols 4 }
+
+   -- definitions of temporal domains
+
+   temporalDomains
+                  OBJECT IDENTIFIER ::= { partyAdmin 2 }
+
+   -- this temporal domain refers to management information
+   -- at the current time
+   currentTime    OBJECT IDENTIFIER ::= { temporalDomains 1 }
+
+   -- this temporal domain refers to management information
+   -- upon the next re-initialization of the managed device
+   restartTime    OBJECT IDENTIFIER ::= { temporalDomains 2 }
+
+   -- the temporal domain { cacheTime N } refers to management
+   -- information that is cached and guaranteed to be at most
+   -- N seconds old
+   cacheTime      OBJECT IDENTIFIER ::= { temporalDomains 3 }
+
+   -- Definition of Initial Party and Context Identifiers
+
+   -- When devices are installed, they need to be configured
+   -- with an initial set of SNMPv2 parties and contexts.  The
+   -- configuration of SNMPv2 parties and contexts requires (among
+   -- other things) the assignment of several OBJECT IDENTIFIERs.
+   -- Any local network administration can obtain the delegated
+   -- authority necessary to assign its own OBJECT IDENTIFIERs.
+   -- However, to provide for those administrations who have not
+   -- obtained the necessary authority, this document allocates a
+   -- branch of the naming tree for use with the following
+   -- conventions.
+
+   initialPartyId OBJECT IDENTIFIER ::= { partyAdmin 3 }
+
+   initialContextId
+                  OBJECT IDENTIFIER ::= { partyAdmin 4 }
+
+   -- Note these are identified as "initial" party and context
+   -- identifiers since these allow secure SNMPv2 communication
+   -- to proceed, thereby allowing further SNMPv2 parties to be
+   -- configured through use of the SNMPv2 itself.
+
+   -- The following definitions identify a party identifier, and
+   -- specify the initial values of various object instances
+   -- indexed by that identifier.  In addition, the SNMPv2
+   -- context, access control policy, and MIB view information
+   -- assigned, by convention, are identified.
+
+   -- Party Identifiers for use as initial SNMPv2 parties
+   --       at IP address  a.b.c.d
+
+   -- Note that for all OBJECT IDENTIFIERs assigned under
+   -- initialPartyId, the four sub-identifiers immediately
+   -- following initialPartyId represent the four octets of
+   -- an IP address.  Initial party identifiers for other address
+   -- families are assigned under a different OBJECT IDENTIFIER,
+   -- as defined elsewhere.
+
+   -- Devices which support SNMPv2 as entities acting in an
+   -- agent role, and accessed via the snmpUDPDomain transport
+   -- domain, are required to be configured with the appropriate
+   -- set of the following as implicit assignments as and when
+   -- they are configured with an IP address.  The appropriate
+   -- set is all those applicable to the authentication and
+   -- privacy protocols supported by the device.
+
+   --      a noAuth/noPriv party which executes at the agent
+   -- partyIdentity            = { initialPartyId a b c d 1 }
+   -- partyIndex               = 1
+   -- partyTDomain             = snmpUDPDomain
+   -- partyTAddress            = a.b.c.d, 161
+   -- partyLocal               = true (in agent's database)
+   -- partyAuthProtocol        = noAuth
+   -- partyAuthClock           = 0
+   -- partyAuthPrivate         = ''H    (the empty string)
+   -- partyAuthPublic          = ''H    (the empty string)
+   -- partyAuthLifetime        = 0
+   -- partyPrivProtocol        = noPriv
+   -- partyPrivPrivate         = ''H    (the empty string)
+   -- partyPrivPublic          = ''H    (the empty string)
+
+   --      a noAuth/noPriv party which executes at a manager
+   -- partyIdentity            = { initialPartyId a b c d 2 }
+   -- partyIndex               = 2
+   -- partyTDomain             = snmpUDPDomain
+   -- partyTAddress            = assigned by local administration
+   -- partyLocal               = false (in agent's database)
+   -- partyAuthProtocol        = noAuth
+   -- partyAuthClock           = 0
+   -- partyAuthPrivate         = ''H    (the empty string)
+   -- partyAuthPublic          = ''H    (the empty string)
+   -- partyAuthLifetime        = 0
+   -- partyPrivProtocol        = noPriv
+   -- partyPrivPrivate         = ''H    (the empty string)
+   -- partyPrivPublic          = ''H    (the empty string)
+
+   --      a md5Auth/noPriv party which executes at the agent
+   -- partyIdentity            = { initialPartyId a b c d 3 }
+   -- partyIndex               = 3
+   -- partyTDomain             = snmpUDPDomain
+   -- partyTAddress            = a.b.c.d, 161
+   -- partyLocal               = true (in agent's database)
+   -- partyAuthProtocol        = v2md5AuthProtocol
+   -- partyAuthClock           = 0
+   -- partyAuthPrivate         = assigned by local administration
+   -- partyAuthPublic          = ''H    (the empty string)
+   -- partyAuthLifetime        = 300
+   -- partyPrivProtocol        = noPriv
+   -- partyPrivPrivate         = ''H    (the empty string)
+   -- partyPrivPublic          = ''H    (the empty string)
+
+   --      a md5Auth/noPriv party which executes at a manager
+   -- partyIdentity            = { initialPartyId a b c d 4 }
+   -- partyIndex               = 4
+   -- partyTDomain             = snmpUDPDomain
+   -- partyTAddress            = assigned by local administration
+   -- partyLocal               = false (in agent's database)
+   -- partyAuthProtocol        = v2md5AuthProtocol
+   -- partyAuthClock           = 0
+   -- partyAuthPrivate         = assigned by local administration
+   -- partyAuthPublic          = ''H    (the empty string)
+   -- partyAuthLifetime        = 300
+   -- partyPrivProtocol        = noPriv
+   -- partyPrivPrivate         = ''H    (the empty string)
+   -- partyPrivPublic          = ''H    (the empty string)
+
+   --      a md5Auth/desPriv party which executes at the agent
+   -- partyIdentity            = { initialPartyId a b c d 5 }
+   -- partyIndex               = 5
+   -- partyTDomain             = snmpUDPDomain
+   -- partyTAddress            = a.b.c.d, 161
+   -- partyLocal               = true (in agent's database)
+   -- partyAuthProtocol        = v2md5AuthProtocol
+   -- partyAuthClock           = 0
+   -- partyAuthPrivate         = assigned by local administration
+   -- partyAuthPublic          = ''H    (the empty string)
+   -- partyAuthLifetime        = 300
+   -- partyPrivProtocol        = desPrivProtocol
+   -- partyPrivPrivate         = assigned by local administration
+   -- partyPrivPublic          = ''H    (the empty string)
+
+   --      a md5Auth/desPriv party which executes at a manager
+   -- partyIdentity            = { initialPartyId a b c d 6 }
+   -- partyIndex               = 6
+   -- partyTDomain             = snmpUDPDomain
+   -- partyTAddress            = assigned by local administration
+   -- partyLocal               = false (in agent's database)
+   -- partyAuthProtocol        = v2md5AuthProtocol
+   -- partyAuthClock           = 0
+   -- partyAuthPrivate         = assigned by local administration
+   -- partyAuthPublic          = ''H    (the empty string)
+   -- partyAuthLifetime        = 300
+   -- partyPrivProtocol        = desPrivProtocol
+   -- partyPrivPrivate         = assigned by local administration
+   -- partyPrivPublic          = ''H    (the empty string)
+
+   -- the initial SNMPv2 contexts assigned, by convention, are:
+
+   -- contextIdentity          = { initialContextId a b c d 1 }
+   -- contextIndex             = 1
+   -- contextLocal             = true (in agent's database)
+   -- contextViewIndex         = 1
+   -- contextLocalEntity       = ''H    (the empty string)
+   -- contextLocalTime         = currentTime
+   -- contextProxyDstParty     = { 0 0 }
+   -- contextProxySrcParty     = { 0 0 }
+   -- contextProxyContext      = { 0 0 }
+
+   -- contextIdentity          = { initialContextId a b c d 2 }
+   -- contextIndex             = 2
+   -- contextLocal             = true (in agent's database)
+   -- contextViewIndex         = 2
+   -- contextLocalEntity       = ''H    (the empty string)
+   -- contextLocalTime         = currentTime
+   -- contextProxyDstParty     = { 0 0 }
+   -- contextProxySrcParty     = { 0 0 }
+   -- contextProxyContext      = { 0 0 }
+
+-- The initial access control policy assigned, by
+-- convention, is:
+
+-- aclTarget                =   1
+-- aclSubject               =   2
+-- aclResources             =   1
+-- aclPrivileges            =  35 (Get, Get-Next & Get-Bulk)
+
+-- aclTarget                =   2
+-- aclSubject               =   1
+-- aclResources             =   1
+-- aclPrivileges            = 132 (Response & SNMPv2-Trap)
+
+-- aclTarget                =   3
+-- aclSubject               =   4
+-- aclResources             =   2
+-- aclPrivileges            =  43 (Get, Get-Next, Set & Get-Bulk)
+
+-- aclTarget                =   4
+-- aclSubject               =   3
+-- aclResources             =   2
+-- aclPrivileges            =   4 (Response)
+
+-- aclTarget                =   5
+-- aclSubject               =   6
+-- aclResources             =   2
+-- aclPrivileges            =  43 (Get, Get-Next, Set & Get-Bulk)
+
+-- aclTarget                =   6
+-- aclSubject               =   5
+-- aclResources             =   2
+-- aclPrivileges            =   4 (Response)
+
+-- Note that the initial context and access control
+-- information assigned above, by default, to the
+-- md5Auth/desPriv parties are identical to those assigned to
+-- the md5Auth/noPriv parties.  However, each administration
+-- may choose to have different authorization policies,
+-- depending on whether privacy is used.
+
+   -- The initial MIB views assigned, by convention, are:
+
+   -- viewIndex                = 1
+   -- viewSubtree              = system
+   -- viewMask                 = ''H
+   -- viewType                 = included
+
+   -- viewIndex                = 1
+   -- viewSubtree              = snmpStats
+   -- viewMask                 = ''H
+   -- viewType                 = included
+
+   -- viewIndex                = 1
+   -- viewSubtree              = snmpParties
+   -- viewMask                 = ''H
+   -- viewType                 = included
+
+   -- viewIndex                = 2
+   -- viewSubtree              = internet
+   -- viewMask                 = ''H
+   -- viewType                 = included
+
+   -- Note that full access to the partyTable, contextTable,
+   -- aclTable, and viewTable gives a manager the ability to
+   -- configure any parties with any/all capabilities (the
+   -- equivalent of "root" access).  A lesser manager can be
+   -- given access only to the partyTable so that it can
+   -- maintain its own parties, but not increase/decrease
+   -- their capabilities.  Such a lesser manager can also
+   -- create new parties but they are of no use to it.
+
+   -- object assignments
+
+   partyMIBObjects
+                  OBJECT IDENTIFIER ::= { partyMIB 2 }
+
+   -- the SNMPv2 party database group
+
+   snmpParties    OBJECT IDENTIFIER ::= { partyMIBObjects 1 }
+
+   partyTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF PartyEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The SNMPv2 Party database."
+       ::= { snmpParties 1 }
+
+   partyEntry OBJECT-TYPE
+       SYNTAX      PartyEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "Locally held information about a particular
+               SNMPv2 party."
+       INDEX      { IMPLIED partyIdentity }
+       ::= { partyTable 1 }
+
+   PartyEntry ::=
+       SEQUENCE {
+           partyIdentity        Party,
+           partyIndex           INTEGER,
+           partyTDomain         OBJECT IDENTIFIER,
+           partyTAddress        TAddress,
+           partyMaxMessageSize  INTEGER,
+           partyLocal           TruthValue,
+           partyAuthProtocol    OBJECT IDENTIFIER,
+           partyAuthClock       Clock,
+           partyAuthPrivate     OCTET STRING,
+           partyAuthPublic      OCTET STRING,
+           partyAuthLifetime    INTEGER,
+           partyPrivProtocol    OBJECT IDENTIFIER,
+           partyPrivPrivate     OCTET STRING,
+           partyPrivPublic      OCTET STRING,
+           partyCloneFrom       Party,
+           partyStorageType     StorageType,
+           partyStatus          RowStatus
+       }
+
+   partyIdentity OBJECT-TYPE
+       SYNTAX      Party
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A party identifier uniquely identifying a
+               particular SNMPv2 party."
+       ::= { partyEntry 1 }
+
+   partyIndex OBJECT-TYPE
+       SYNTAX      INTEGER (1..65535)
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "A unique value for each SNMPv2 party.  The value
+               for each SNMPv2 party must remain constant at
+               least from one re-initialization of the entity's
+               network management system to the next re-
+               initialization."
+       ::= { partyEntry 2 }
+
+   partyTDomain OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "Indicates the kind of transport service by which
+               the party receives network management traffic."
+       DEFVAL      { snmpUDPDomain }
+       ::= { partyEntry 3 }
+
+   partyTAddress OBJECT-TYPE
+       SYNTAX      TAddress
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The transport service address by which the party
+               receives network management traffic, formatted
+               according to the corresponding value of
+               partyTDomain.  For snmpUDPDomain, partyTAddress is
+               formatted as a 4-octet IP Address concatenated
+               with a 2-octet UDP port number."
+       DEFVAL      { '000000000000'H }
+       ::= { partyEntry 4 }
+
+   partyMaxMessageSize OBJECT-TYPE
+       SYNTAX      INTEGER (484..65507)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The maximum length in octets of a SNMPv2 message
+               which this party will accept.  For parties which
+               execute at an agent, the agent initializes this
+               object to the maximum length supported by the
+               agent, and does not let the object be set to any
+               larger value.  For parties which do not execute at
+               the agent, the agent must allow the manager to set
+               this object to any legal value, even if it is
+               larger than the agent can generate."
+       DEFVAL      { 484 }
+       ::= { partyEntry 5 }
+
+   partyLocal OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "An indication of whether this party executes at
+               this SNMPv2 entity.  If this object has a value of
+               true(1), then the SNMPv2 entity will listen for
+               SNMPv2 messages on the partyTAddress associated
+               with this party.  If this object has the value
+               false(2), then the SNMPv2 entity will not listen
+               for SNMPv2 messages on the partyTAddress
+               associated with this party."
+       DEFVAL      { false }
+       ::= { partyEntry 6 }
+
+   partyAuthProtocol OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The authentication protocol by which all messages
+               generated by the party are authenticated as to
+               origin and integrity.  The value noAuth signifies
+               that messages generated by the party are not
+               authenticated.
+
+               Once an instance of this object is created, its
+               value can not be changed."
+       DEFVAL      { v2md5AuthProtocol }
+       ::= { partyEntry 7 }
+
+   partyAuthClock OBJECT-TYPE
+       SYNTAX      Clock
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The authentication clock which represents the
+               local notion of the current time specific to the
+               party.  This value must not be decremented unless
+               the party's private authentication key is changed
+               simultaneously."
+       DEFVAL      { 0 }
+       ::= { partyEntry 8 }
+
+   partyAuthPrivate OBJECT-TYPE
+       SYNTAX      OCTET STRING
+                   -- for v2md5AuthProtocol: (SIZE (16))
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "An encoding of the party's private authentication
+               key which may be needed to support the
+               authentication protocol.  Although the value of
+               this variable may be altered by a management
+               operation (e.g., a SNMPv2 Set-Request), its value
+               can never be retrieved by a management operation:
+               when read, the value of this variable is the zero
+               length OCTET STRING.
+
+               The private authentication key is NOT directly
+               represented by the value of this variable, but
+               rather it is represented according to an encoding.
+               This encoding is the bitwise exclusive-OR of the
+               old key with the new key, i.e., of the old private
+               authentication key (prior to the alteration) with
+               the new private authentication key (after the
+               alteration).  Thus, when processing a received
+               protocol Set operation, the new private
+               authentication key is obtained from the value of
+               this variable as the result of a bitwise
+               exclusive-OR of the variable's value and the old
+               private authentication key.  In calculating the
+               exclusive-OR, if the old key is shorter than the
+               new key, zero-valued padding is appended to the
+               old key.  If no value for the old key exists, a
+               zero-length OCTET STRING is used in the
+               calculation."
+       DEFVAL      { ''H }     -- the empty string
+       ::= { partyEntry 9 }
+
+   partyAuthPublic OBJECT-TYPE
+       SYNTAX      OCTET STRING
+                   -- for v2md5AuthProtocol: (SIZE (0..16))
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "A publically-readable value for the party.
+
+               Depending on the party's authentication protocol,
+               this value may be needed to support the party's
+               authentication protocol.  Alternatively, it may be
+               used by a manager during the procedure for
+               altering secret information about a party.  (For
+               example, by altering the value of an instance of
+               this object in the same SNMPv2 Set-Request used to
+               update an instance of partyAuthPrivate, a
+               subsequent Get-Request can determine if the Set-
+               Request was successful in the event that no
+               response to the Set-Request is received, see [4].)
+
+               The length of the value is dependent on the
+               party's authentication protocol.  If not used by
+               the authentication protocol, it is recommended
+               that agents support values of any length up to and
+               including the length of the corresponding
+               partyAuthPrivate object."
+       DEFVAL      { ''H }      -- the empty string
+       ::= { partyEntry 10 }
+
+   partyAuthLifetime OBJECT-TYPE
+       SYNTAX      INTEGER (0..2147483647)
+       UNITS       "seconds"
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The lifetime (in units of seconds) which
+               represents an administrative upper bound on
+               acceptable delivery delay for protocol messages
+               generated by the party.
+
+               Once an instance of this object is created, its
+               value can not be changed."
+       DEFVAL      { 300 }
+       ::= { partyEntry 11 }
+
+   partyPrivProtocol OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The privacy protocol by which all protocol
+               messages received by the party are protected from
+               disclosure.  The value noPriv signifies that
+               messages received by the party are not protected.
+
+               Once an instance of this object is created, its
+               value can not be changed."
+       DEFVAL      { noPriv }
+       ::= { partyEntry 12 }
+
+   partyPrivPrivate OBJECT-TYPE
+       SYNTAX      OCTET STRING
+                   -- for desPrivProtocol: (SIZE (16))
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "An encoding of the party's private encryption key
+               which may be needed to support the privacy
+               protocol.  Although the value of this variable may
+               be altered by a management operation (e.g., a
+               SNMPv2 Set-Request), its value can never be
+               retrieved by a management operation: when read,
+               the value of this variable is the zero length
+               OCTET STRING.
+
+               The private encryption key is NOT directly
+               represented by the value of this variable, but
+               rather it is represented according to an encoding.
+               This encoding is the bitwise exclusive-OR of the
+               old key with the new key, i.e., of the old private
+               encryption key (prior to the alteration) with the
+               new private encryption key (after the alteration).
+               Thus, when processing a received protocol Set
+               operation, the new private encryption key is
+               obtained from the value of this variable as the
+               result of a bitwise exclusive-OR of the variable's
+               value and the old private encryption key.  In
+               calculating the exclusive-OR, if the old key is
+               shorter than the new key, zero-valued padding is
+               appended to the old key.  If no value for the old
+               key exists, a zero-length OCTET STRING is used in
+               the calculation."
+       DEFVAL      { ''H }     -- the empty string
+       ::= { partyEntry 13 }
+
+   partyPrivPublic OBJECT-TYPE
+       SYNTAX      OCTET STRING
+                   -- for desPrivProtocol: (SIZE (0..16))
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "A publically-readable value for the party.
+
+               Depending on the party's privacy protocol, this
+               value may be needed to support the party's privacy
+               protocol.  Alternatively, it may be used by a
+               manager as a part of its procedure for altering
+               secret information about a party.  (For example,
+               by altering the value of an instance of this
+               object in the same SNMPv2 Set-Request used to
+               update an instance of partyPrivPrivate, a
+               subsequent Get-Request can determine if the Set-
+               Request was successful in the event that no
+               response to the Set-Request is received, see [4].)
+
+               The length of the value is dependent on the
+               party's privacy protocol.  If not used by the
+               privacy protocol, it is recommended that agents
+               support values of any length up to and including
+               the length of the corresponding partyPrivPrivate
+               object."
+       DEFVAL      { ''H }     -- the empty string
+       ::= { partyEntry 14 }
+
+   partyCloneFrom OBJECT-TYPE
+       SYNTAX      Party
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The identity of a party to clone authentication
+               and privacy parameters from.  When read, the value
+               { 0 0 } is returned.
+
+               This value must be written exactly once, when the
+               associated instance of partyStatus either does not
+               exist or has the value `notReady'.  When written,
+               the value identifies a party, the cloning party,
+               whose status column has the value `active'.  The
+               cloning party is used in two ways.
+
+               One, if instances of the following objects do not
+               exist for the party being created, then they are
+               created with values identical to those of the
+               corresponding objects for the cloning party:
+
+                    partyAuthProtocol
+                    partyAuthPublic
+                    partyAuthLifetime
+                    partyPrivProtocol
+                    partyPrivPublic
+
+               Two, instances of the following objects are
+               updated using the corresponding values of the
+               cloning party:
+
+                    partyAuthPrivate
+                    partyPrivPrivate
+
+               (e.g., the value of the cloning party's instance
+               of the partyAuthPrivate object is XOR'd with the
+               value of the partyAuthPrivate instances of the
+               party being created.)"
+       ::= { partyEntry 15 }
+
+   partyStorageType OBJECT-TYPE
+       SYNTAX      StorageType
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The storage type for this conceptual row in the
+               partyTable."
+       DEFVAL      { nonVolatile }
+       ::= { partyEntry 16 }
+
+   partyStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The status of this conceptual row in the
+               partyTable.
+
+               A party is not qualified for activation until
+               instances of all columns of its partyEntry row
+               have an appropriate value.  In particular:
+
+                 A value must be written to the Party's
+                 partyCloneFrom object.
+
+                 If the Party's partyAuthProtocol object has the
+                 value md5AuthProtocol, then the corresponding
+                 instance of partyAuthPrivate must contain a
+                 secret of the appropriate length.  Further, at
+                 least one management protocol set operation
+                 updating the value of the party's
+                 partyAuthPrivate object must be successfully
+                 processed, before the partyAuthPrivate column is
+                 considered appropriately configured.
+
+                 If the Party's partyPrivProtocol object has the
+                 value desPrivProtocol, then the corresponding
+                 instance of partyPrivPrivate must contain a
+                 secret of the appropriate length.  Further, at
+                 least one management protocol set operation
+                 updating the value of the party's
+                 partyPrivPrivate object must be successfully
+                 processed, before the partyPrivPrivate column is
+                 considered appropriately configured.
+
+              Until instances of all corresponding columns are
+              appropriately configured, the value of the
+              corresponding instance of the partyStatus column is
+              `notReady'."
+       ::= { partyEntry 17 }
+
+   -- the SNMPv2 contexts database group
+
+   snmpContexts   OBJECT IDENTIFIER ::= { partyMIBObjects 2 }
+
+   contextTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF ContextEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The SNMPv2 Context database."
+       ::= { snmpContexts 1 }
+
+   contextEntry OBJECT-TYPE
+       SYNTAX      ContextEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "Locally held information about a particular
+               SNMPv2 context."
+       INDEX      { IMPLIED contextIdentity }
+       ::= { contextTable 1 }
+
+   ContextEntry ::=
+       SEQUENCE {
+           contextIdentity         Context,
+           contextIndex            INTEGER,
+           contextLocal            TruthValue,
+           contextViewIndex        INTEGER,
+           contextLocalEntity      OCTET STRING,
+           contextLocalTime        OBJECT IDENTIFIER,
+           contextProxyDstParty    Party,
+           contextProxySrcParty    Party,
+           contextProxyContext     OBJECT IDENTIFIER,
+           contextStorageType      StorageType,
+           contextStatus           RowStatus
+       }
+
+   contextIdentity OBJECT-TYPE
+       SYNTAX      Context
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A context identifier uniquely identifying a
+               particular SNMPv2 context."
+       ::= { contextEntry 1 }
+
+   contextIndex OBJECT-TYPE
+       SYNTAX      INTEGER (1..65535)
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "A unique value for each SNMPv2 context.  The
+               value for each SNMPv2 context must remain constant
+               at least from one re-initialization of the
+               entity's network management system to the next
+               re-initialization."
+       ::= { contextEntry 2 }
+
+   contextLocal OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "An indication of whether this context is realized
+               by this SNMPv2 entity."
+       DEFVAL      { true }
+       ::= { contextEntry 3 }
+
+   contextViewIndex OBJECT-TYPE
+       SYNTAX      INTEGER (0..65535)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "If the value of an instance of this object is
+               zero, then this corresponding conceptual row in
+               the contextTable refers to a SNMPv2 context which
+               identifies a proxy relationship; the values of the
+               corresponding instances of the
+               contextProxyDstParty, contextProxySrcParty, and
+               contextProxyContext objects provide further
+               information on the proxy relationship.
+
+               Otherwise, if the value of an instance of this
+               object is greater than zero, then this
+               corresponding conceptual row in the contextTable
+               refers to a SNMPv2 context which identifies a MIB
+               view of a locally accessible entity; the value of
+               the instance identifies the particular MIB view
+               which has the same value of viewIndex; and the
+               value of the corresponding instances of the
+               contextLocalEntity and contextLocalTime objects
+               provide further information on the local entity
+               and its temporal domain."
+       ::= { contextEntry 4 }
+
+   contextLocalEntity OBJECT-TYPE
+       SYNTAX      OCTET STRING
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "If the value of the corresponding instance of the
+               contextViewIndex is greater than zero, then the
+               value of an instance of this object identifies the
+               local entity whose management information is in
+               the SNMPv2 context's MIB view.  The empty string
+               indicates that the MIB view contains the SNMPv2
+               entity's own local management information;
+               otherwise, a non-empty string indicates that the
+               MIB view contains management information of some
+               other local entity, e.g., 'Repeater1'."
+       DEFVAL      { ''H }     -- the empty string
+       ::= { contextEntry 5 }
+
+   contextLocalTime OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "If the value of the corresponding instance of the
+               contextViewIndex is greater than zero, then the
+               value of an instance of this object identifies the
+               temporal context of the management information in
+               the MIB view."
+       DEFVAL      { currentTime }
+       ::= { contextEntry 6 }
+
+   contextProxyDstParty OBJECT-TYPE
+       SYNTAX      Party
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "If the value of the corresponding instance of the
+               contextViewIndex is equal to zero, then the value
+               of an instance of this object identifies a SNMPv2
+               party which is the proxy destination of a proxy
+               relationship.
+
+               If the value of the corresponding instance of the
+               contextViewIndex is greater than zero, then the
+               value of an instance of this object is { 0 0 }."
+       ::= { contextEntry 7 }
+
+   contextProxySrcParty OBJECT-TYPE
+       SYNTAX      Party
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "If the value of the corresponding instance of the
+               contextViewIndex is equal to zero, then the value
+               of an instance of this object identifies a SNMPv2
+               party which is the proxy source of a proxy
+               relationship.
+
+               Interpretation of an instance of this object
+               depends upon the value of the transport domain
+               associated with the SNMPv2 party used as the proxy
+               destination in this proxy relationship.
+
+               If the value of the corresponding instance of the
+               contextViewIndex is greater than zero, then the
+               value of an instance of this object is { 0 0 }."
+       ::= { contextEntry 8 }
+
+   contextProxyContext OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "If the value of the corresponding instance of the
+               contextViewIndex is equal to zero, then the value
+               of an instance of this object identifies the
+               context of a proxy relationship.
+
+               Interpretation of an instance of this object
+               depends upon the value of the transport domain
+               associated with the SNMPv2 party used as the proxy
+               destination in this proxy relationship.
+
+               If the value of the corresponding instance of the
+               contextViewIndex is greater than zero, then the
+               value of an instance of this object is { 0 0 }."
+       ::= { contextEntry 9 }
+
+   contextStorageType OBJECT-TYPE
+       SYNTAX      StorageType
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The storage type for this conceptual row in the
+               contextTable."
+       DEFVAL      { nonVolatile }
+       ::= { contextEntry 10 }
+
+   contextStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The status of this conceptual row in the
+               contextTable.
+
+               A context is not qualified for activation until
+               instances of all corresponding columns have the
+               appropriate value.  In  particular, if the
+               context's contextViewIndex is greater than zero,
+               then the viewStatus column of the associated
+               conceptual row(s) in the viewTable must have the
+               value `active'.  Until instances of all
+               corresponding columns are appropriately
+               configured, the value of the corresponding
+               instance of the contextStatus column is
+               `notReady'."
+       ::= { contextEntry 11 }
+
+   -- the SNMPv2 access privileges database group
+
+   snmpAccess     OBJECT IDENTIFIER ::= { partyMIBObjects 3 }
+
+   aclTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF AclEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The access privileges database."
+       ::= { snmpAccess 1 }
+
+   aclEntry OBJECT-TYPE
+       SYNTAX      AclEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The access privileges for a particular subject
+               SNMPv2 party when asking a particular target
+               SNMPv2 party to access a particular SNMPv2
+               context."
+       INDEX      { aclTarget, aclSubject, aclResources }
+       ::= { aclTable 1 }
+
+   AclEntry ::=
+       SEQUENCE {
+           aclTarget        INTEGER,
+           aclSubject       INTEGER,
+           aclResources     INTEGER,
+           aclPrivileges    INTEGER,
+           aclStorageType   StorageType,
+           aclStatus        RowStatus
+       }
+
+   aclTarget OBJECT-TYPE
+       SYNTAX      INTEGER (1..65535)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The value of an instance of this object
+               identifies a SNMPv2 party which is the target of
+               an access control policy, and has the same value
+               as the instance of the partyIndex object for that
+               party."
+       ::= { aclEntry 1 }
+
+   aclSubject OBJECT-TYPE
+       SYNTAX      INTEGER (1..65535)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The value of an instance of this object
+               identifies a SNMPv2 party which is the subject of
+               an access control policy, and has the same value
+               as the instance of the partyIndex object for that
+               SNMPv2 party."
+       ::= { aclEntry 2 }
+
+   aclResources OBJECT-TYPE
+       SYNTAX      INTEGER (1..65535)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The value of an instance of this object
+               identifies a SNMPv2 context in an access control
+               policy, and has the same value as the instance of
+               the contextIndex object for that SNMPv2 context."
+       ::= { aclEntry 3 }
+
+   aclPrivileges OBJECT-TYPE
+       SYNTAX      INTEGER (0..255)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The access privileges which govern what
+               management operations a particular target party
+               may perform with respect to a particular SNMPv2
+               context when requested by a particular subject
+               party.  These privileges are specified as a sum of
+               values, where each value specifies a SNMPv2 PDU
+               type by which the subject party may request a
+               permitted operation.  The value for a particular
+               PDU type is computed as 2 raised to the value of
+               the ASN.1 context-specific tag for the appropriate
+               SNMPv2 PDU type.  The values (for the tags defined
+               in [5]) are defined in [3] as:
+
+                Get         :   1
+                GetNext     :   2
+                Response    :   4
+                Set         :   8
+                unused      :  16
+                GetBulk     :  32
+                Inform      :  64
+                SNMPv2-Trap : 128
+
+               The null set is represented by the value zero."
+       DEFVAL      { 35 }      -- Get, Get-Next & Get-Bulk
+       ::= { aclEntry 4 }
+
+   aclStorageType OBJECT-TYPE
+       SYNTAX      StorageType
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The storage type for this conceptual row in the
+               aclTable."
+       DEFVAL      { nonVolatile }
+       ::= { aclEntry 5 }
+
+   aclStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The status of this conceptual row in the
+               aclTable."
+       ::= { aclEntry 6 }
+
+   -- the MIB view database group
+
+   snmpViews      OBJECT IDENTIFIER ::= { partyMIBObjects 4 }
+
+   viewTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF ViewEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "Locally held information about the MIB views
+               known to this SNMPv2 entity.
+
+               Each SNMPv2 context which is locally accessible
+               has a single MIB view which is defined by two
+               collections of view subtrees: the included view
+               subtrees, and the excluded view subtrees.  Every
+               such subtree, both included and excluded, is
+               defined in this table.
+
+               To determine if a particular object instance is in
+               a particular MIB view, compare the object
+               instance's OBJECT IDENTIFIER with each of the MIB
+               view's entries in this table.  If none match, then
+               the object instance is not in the MIB view.  If
+               one or more match, then the object instance is
+               included in, or excluded from, the MIB view
+               according to the value of viewType in the entry
+               whose value of viewSubtree has the most sub-
+               identifiers.  If multiple entries match and have
+               the same number of sub-identifiers, then the
+               lexicographically greatest instance of viewType
+               determines the inclusion or exclusion.
+
+               An object instance's OBJECT IDENTIFIER X matches
+               an entry in this table when the number of sub-
+               identifiers in X is at least as many as in the
+               value of viewSubtree for the entry, and each sub-
+               identifier in the value of viewSubtree matches its
+               corresponding sub-identifier in X.  Two sub-
+               identifiers match either if the corresponding bit
+               of viewMask is zero (the 'wild card' value), or if
+               they are equal.
+
+               Due to this 'wild card' capability, we introduce
+
+               the term, a 'family' of view subtrees, to refer to
+               the set of subtrees defined by a particular
+               combination of values of viewSubtree and viewMask.
+               In the case where no 'wild card' is defined in
+               viewMask, the family of view subtrees reduces to a
+               single view subtree."
+       ::= { snmpViews 1 }
+
+   viewEntry OBJECT-TYPE
+       SYNTAX      ViewEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "Information on a particular family of view
+               subtrees included in or excluded from a particular
+               SNMPv2 context's MIB view.
+
+               Implementations must not restrict the number of
+               families of view subtrees for a given MIB view,
+               except as dictated by resource constraints on the
+               overall number of entries in the viewTable."
+       INDEX      { viewIndex, IMPLIED viewSubtree }
+       ::= { viewTable 1 }
+
+   ViewEntry ::=
+       SEQUENCE {
+           viewIndex        INTEGER,
+           viewSubtree      OBJECT IDENTIFIER,
+           viewMask         OCTET STRING,
+           viewType         INTEGER,
+           viewStorageType  StorageType,
+           viewStatus       RowStatus
+       }
+
+   viewIndex OBJECT-TYPE
+       SYNTAX      INTEGER (1..65535)
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A unique value for each MIB view.  The value for
+               each MIB view must remain constant at least from
+               one re-initialization of the entity's network
+               management system to the next re-initialization."
+       ::= { viewEntry 1 }
+
+   viewSubtree OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "A MIB subtree."
+       ::= { viewEntry 2 }
+
+   viewMask OBJECT-TYPE
+       SYNTAX      OCTET STRING (SIZE (0..16))
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The bit mask which, in combination with the
+               corresponding instance of viewSubtree, defines a
+               family of view subtrees.
+
+               Each bit of this bit mask corresponds to a sub-
+               identifier of viewSubtree, with the most
+               significant bit of the i-th octet of this octet
+               string value (extended if necessary, see below)
+               corresponding to the (8*i - 7)-th sub-identifier,
+               and the least significant bit of the i-th octet of
+               this octet string corresponding to the (8*i)-th
+               sub-identifier, where i is in the range 1 through
+               16.
+
+               Each bit of this bit mask specifies whether or not
+               the corresponding sub-identifiers must match when
+               determining if an OBJECT IDENTIFIER is in this
+               family of view subtrees; a '1' indicates that an
+               exact match must occur; a '0' indicates 'wild
+               card', i.e., any sub-identifier value matches.
+
+               Thus, the OBJECT IDENTIFIER X of an object
+               instance is contained in a family of view subtrees
+               if the following criteria are met:
+
+                    for each sub-identifier of the value of
+                    viewSubtree, either:
+
+                         the i-th bit of viewMask is 0, or
+
+                         the i-th sub-identifier of X is equal to
+                         the i-th sub-identifier of the value of
+                         viewSubtree.
+
+               If the value of this bit mask is M bits long and
+               there are more than M sub-identifiers in the
+               corresponding instance of viewSubtree, then the
+               bit mask is extended with 1's to be the required
+               length.
+
+               Note that when the value of this object is the
+               zero-length string, this extension rule results in
+               a mask of all-1's being used (i.e., no 'wild
+               card'), and the family of view subtrees is the one
+               view subtree uniquely identified by the
+               corresponding instance of viewSubtree."
+       DEFVAL      { ''H }
+       ::= { viewEntry 3 }
+
+   viewType OBJECT-TYPE
+       SYNTAX      INTEGER  {
+                       included(1),
+                       excluded(2)
+                   }
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The status of a particular family of view
+               subtrees within the particular SNMPv2 context's
+               MIB view.  The value 'included(1)' indicates that
+               the corresponding instances of viewSubtree and
+               viewMask define a family of view subtrees included
+               in the MIB view.  The  value 'excluded(2)'
+               indicates that the corresponding instances of
+               viewSubtree and viewMask define a family of view
+               subtrees excluded from the MIB view."
+       DEFVAL      { included }
+       ::= { viewEntry 4 }
+
+   viewStorageType OBJECT-TYPE
+       SYNTAX      StorageType
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The storage type for this conceptual row in the
+               viewTable."
+       DEFVAL      { nonVolatile }
+       ::= { viewEntry 5 }
+
+   viewStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The status of this conceptual row in the
+               viewTable."
+       ::= { viewEntry 6 }
+
+   -- conformance information
+
+   partyMIBConformance
+                  OBJECT IDENTIFIER ::= { partyMIB 3 }
+
+   partyMIBCompliances
+                  OBJECT IDENTIFIER ::= { partyMIBConformance 1 }
+   partyMIBGroups
+                  OBJECT IDENTIFIER ::= { partyMIBConformance 2 }
+
+   -- compliance statements
+
+   unSecurableCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "The compliance statement for SNMPv2 entities
+               which implement the Party MIB, but do not support
+               any authentication or privacy protocols (i.e.,
+               only the noAuth and noPriv protocols are
+               supported)."
+       MODULE  -- this module
+           MANDATORY-GROUPS { partyMIBGroup }
+       ::= { partyMIBCompliances 1 }
+
+   partyNoPrivacyCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "The compliance statement for SNMPv2 entities
+               which implement the Party MIB, and support an
+               authentication protocol, but do not support any
+               privacy protocols (i.e., only the noAuth,
+               v2md5AuthProtocol, and noPriv protocols are
+               supported)."
+       MODULE  -- this module
+           MANDATORY-GROUPS { partyMIBGroup }
+       ::= { partyMIBCompliances 2 }
+
+   partyPrivacyCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "The compliance statement for SNMPv2 entities
+               which implement the Party MIB, support an
+               authentication protocol, and support a privacy
+               protocol ONLY for the purpose of accessing
+               security parameters.
+
+               For all aclTable entries authorizing a subject
+               and/or target SNMPv2 party whose privacy protocol
+               is desPrivProtocol, to be used in accessing a
+               SNMPv2 context, the MIB view for that SNMPv2
+               context shall include only those objects
+               subordinate to partyMIBObjects, or a subset
+               thereof, e.g.,
+                    viewSubtree = { partyMIBObjects }
+                    viewMask    = ''H
+                    viewType    = { included }
+
+               Any attempt to configure an entry in the
+               partyTable, the contextTable, the aclTable or the
+               viewTable such that a party using the
+               desPrivProtocol would be authorized for use in
+               accessing objects outside of the partyMIBObjects
+               subtree shall result in the appropriate error
+               response (e.g., wrongValue or inconsistentValue)."
+       MODULE  -- this module
+           MANDATORY-GROUPS { partyMIBGroup }
+       ::= { partyMIBCompliances 3 }
+
+   fullPrivacyCompliance MODULE-COMPLIANCE
+       STATUS  current
+       DESCRIPTION
+               "The compliance statement for SNMPv2 entities
+               which implement the Party MIB, support an
+               authentication protocol, and support a privacy
+               protocol without restrictions on its use."
+       MODULE  -- this module
+           MANDATORY-GROUPS { partyMIBGroup }
+       ::= { partyMIBCompliances 4 }
+
+ -- units of conformance
+
+ partyMIBGroup OBJECT-GROUP
+     OBJECTS { partyIndex, partyTDomain, partyTAddress,
+               partyMaxMessageSize, partyLocal,
+               partyAuthProtocol, partyAuthClock,
+               partyAuthPrivate, partyAuthPublic,
+               partyAuthLifetime, partyPrivProtocol,
+               partyPrivPrivate, partyPrivPublic,
+               partyStorageType, partyStatus,
+               partyCloneFrom,
+               contextIndex, contextLocal,
+               contextViewIndex, contextLocalEntity,
+               contextLocalTime, contextStorageType,
+               contextStatus, aclTarget, aclSubject,
+               aclPrivileges, aclStorageType, aclStatus,
+               viewMask, viewType, viewStorageType, viewStatus }
+     STATUS  current
+     DESCRIPTION
+             "The collection of objects allowing the
+             description and configuration of SNMPv2 parties.
+
+             Note that objects which support proxy
+             relationships are not included in this conformance
+             group."
+     ::= { partyMIBGroups 1 }
+
+ END
diff --git a/snmp_builder/mibs/SNMPv2-USEC-MIB.mib b/snmp_builder/mibs/SNMPv2-USEC-MIB.mib
new file mode 100644
index 0000000..9cdc062
--- /dev/null
+++ b/snmp_builder/mibs/SNMPv2-USEC-MIB.mib
@@ -0,0 +1,238 @@
+SNMPv2-USEC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32,
+    snmpModules
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+usecMIB MODULE-IDENTITY
+    LAST-UPDATED "9601120000Z"
+    ORGANIZATION "IETF SNMPv2 Working Group"
+    CONTACT-INFO
+            "        Glenn W. Waters
+
+             Postal: Bell-Northern Research, Ltd.
+                     P.O. Box 3511, Station C
+                     Ottawa, ON, K1Y 4H7
+                     Canada
+
+                Tel: +1 613 763 3933
+
+             E-mail: gwaters@bnr.ca"
+    DESCRIPTION
+            "The MIB module for SNMPv2 entities implementing the user-
+            based security model."
+    ::= { snmpModules 6 }
+
+usecMIBObjects OBJECT IDENTIFIER ::= { usecMIB 1 }
+
+-- Textual Conventions
+
+AgentID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "An agent's administratively-unique identifier.
+
+            The value for this object may not be all zeros or all 'ff'H.
+
+            The initial value for this object may be configured via an
+            operator console entry or via an algorithmic function.  In
+
+            the later case, the following guidelines are recommended:
+
+              1) The first four octets are set to the binary equivalent
+                 of the agent's SNMP network management private
+                 enterprise number as assigned by the Internet Assigned
+                 Numbers Authority (IANA).  For example, if Acme
+                 Networks has been assigned { enterprises 696 }, the
+                 first four octets would be assigned '000002b8'H.
+
+              2) The remaining eight octets are the cookie whose
+                 contents are determined via one or more enterprise-
+                 specific methods.  Such methods must be designed so as
+                 to maximize the possibility that the value of this
+                 object will be unique in the agent's administrative
+                 domain.  For example, the cookie may be the IP address
+                 of the agent, or the MAC address of one of the
+                 interfaces, with each address suitably padded with
+                 random octets.  If multiple methods are defined, then
+                 it is recommended that the cookie be further divided
+                 into one octet that indicates the method being used and
+                 seven octets which are a function of the method."
+    SYNTAX     OCTET STRING (SIZE (12))
+
+-- the USEC Basic group
+--
+-- a collection of objects providing basic instrumentation of
+-- the SNMPv2 entity implementing the user-based security model
+
+usecAgent       OBJECT IDENTIFIER ::= { usecMIBObjects 1 }
+
+agentID OBJECT-TYPE
+    SYNTAX     AgentID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The agent's administratively-unique identifier."
+    ::= { usecAgent 1 }
+
+agentBoots OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of times that the agent has re-initialized
+            itself since its initial configuration."
+    ::= { usecAgent 2 }
+
+agentTime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..2147483647)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of seconds since the agent last incremented the
+            agentBoots object."
+    ::= { usecAgent 3 }
+
+agentSize OBJECT-TYPE
+    SYNTAX     INTEGER (484..65507)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The maximum length in octets of an SNMPv2 message which
+            this agent will accept using any transport mapping."
+    ::= { usecAgent 4 }
+
+-- USEC statistics
+--
+-- a collection of objects providing basic instrumentation of
+-- the SNMPv2 entity implementing the user-based security model
+
+usecStats      OBJECT IDENTIFIER ::= { usecMIBObjects 2 }
+
+usecStatsUnsupportedQoS OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because they requested a quality-of-
+            service that was unknown to the agent or otherwise
+            unavailable."
+    ::= { usecStats 1 }
+
+usecStatsNotInWindows OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because they appeared outside of the
+            agent's window."
+    ::= { usecStats 2 }
+
+usecStatsUnknownUserNames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because they referenced a user that was
+            not known to the agent."
+    ::= { usecStats 3 }
+
+usecStatsWrongDigestValues OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because they didn't contain the expected
+            digest value."
+    ::= { usecStats 4 }
+
+usecStatsUnknownContexts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because they referenced a context that
+            was not known to the agent."
+    ::= { usecStats 5 }
+
+usecStatsBadParameters OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because the <parameters> field was
+            improperly encoded or had invalid syntax."
+    ::= { usecStats 6 }
+
+usecStatsUnauthorizedOperations OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of packets received by the SNMPv2 entity
+            which were dropped because the PDU type referred to an
+            operation that is invalid or not authorized."
+    ::= { usecStats 7 }
+
+-- conformance information
+
+usecMIBConformance
+               OBJECT IDENTIFIER ::= { usecMIB 2 }
+
+usecMIBCompliances
+               OBJECT IDENTIFIER ::= { usecMIBConformance 1 }
+usecMIBGroups  OBJECT IDENTIFIER ::= { usecMIBConformance 2 }
+
+-- compliance statements
+
+usecMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities which
+            implement the SNMPv2 USEC model."
+    MODULE  -- this module
+        MANDATORY-GROUPS { usecBasicGroup,
+                          usecStatsGroup }
+    ::= { usecMIBCompliances 1 }
+
+-- units of conformance
+
+usecBasicGroup OBJECT-GROUP
+    OBJECTS { agentID,
+              agentBoots,
+              agentTime,
+              agentSize }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing identification, clocks,
+            and capabilities of an SNMPv2 entity which implements the
+            SNMPv2 USEC model."
+    ::= { usecMIBGroups 1 }
+
+usecStatsGroup OBJECT-GROUP
+    OBJECTS { usecStatsUnsupportedQoS,
+              usecStatsNotInWindows,
+              usecStatsUnknownUserNames,
+              usecStatsWrongDigestValues,
+              usecStatsUnknownContexts,
+              usecStatsBadParameters,
+              usecStatsUnauthorizedOperations }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing basic error statistics of
+            an SNMPv2 entity which implements the SNMPv2 USEC model."
+    ::= { usecMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/SONET-MIB.mib b/snmp_builder/mibs/SONET-MIB.mib
new file mode 100644
index 0000000..5ee7d71
--- /dev/null
+++ b/snmp_builder/mibs/SONET-MIB.mib
@@ -0,0 +1,2360 @@
+SONET-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, transmission
+          FROM SNMPv2-SMI
+    DisplayString, TruthValue
+          FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+          FROM SNMPv2-CONF
+    ifIndex
+          FROM IF-MIB
+    PerfCurrentCount, PerfIntervalCount
+          FROM PerfHist-TC-MIB;
+
+--  This is the MIB module for the SONET/SDH Interface objects.
+
+sonetMIB MODULE-IDENTITY
+    LAST-UPDATED "200308110000Z"
+    ORGANIZATION "IETF AToM MIB Working Group"
+
+    CONTACT-INFO
+      "WG charter:
+         http://www.ietf.org/html.charters/atommib-charter.html
+
+       Mailing Lists:
+         General Discussion: atommib@research.telcordia.com
+         To Subscribe: atommib-request@research.telcordia.com
+
+       Kaj Tesink
+       Telcordia Technologies
+       Tel: (732) 758-5254
+       Fax: (732) 758-2269
+       E-mail: kaj@research.telcordia.com."
+    DESCRIPTION
+      "The MIB module to describe SONET/SDH interface objects.
+
+       Copyright (C) The Internet Society (2003).  This version
+       of this MIB module is part of RFC 3592;  see the RFC
+       itself for full legal notices."
+    REVISION      "200308110000Z"
+    DESCRIPTION
+        "The key changes made to this MIB module
+        since its publication in RFC 2558
+        are as follows.
+
+        (1) Corrected typographical error
+            (bellcore1991(2) in sonetSESthresholdSet)
+
+        (2) Added support for sts192cSTM64(6) and
+            sts768cSTM256(7) in sonetPathCurrentWidth
+
+        (3) Corrected description of the applicability
+            of VTs for SDH for improved accuracy
+
+        (4) Added clarification in the SES description that
+            CV counts should be frozen during SESs
+
+        (5) Corrected typographical errors:
+            - Line Alarm Indication Signal description of the
+              Terminology section (20.5 --> 2.5 seconds)
+            - In the Terminology section
+              sonetSESThresholdSet  --> sonetSESthresholdSet
+            "
+    REVISION      "199810190000Z"
+    DESCRIPTION
+        "The RFC 2558 version of this MIB module.
+
+        The key changes made to this MIB module
+        since its initial publication in RFC 1595
+        are as follows.
+
+        (1) The MODULE-IDENTITY has been updated to reflect the
+            changes to the MIB.
+
+        (2) Where applicable, the textual conventions
+            PerfCurrentCount and PerfIntervalCount from
+            PerfHist-TC-MIB have been used in place of Gauge32.
+
+        (3) An agent now has the option to delay updates to
+            the various performance counts in lieu of performing
+            retroactive adjustments upon entering into or exiting
+            from unavailable time. This implementation option is
+            described in Appendix A of this memo.
+
+        (4) In order to make the SONET-MIB more useful for
+            circuit provisioning, the formerly read-only objects
+            sonetMediumType, sonetMediumLineCoding,
+            sonetMediumLineType, and sonetMediumCircuitIdentifier
+            have been given a MAX-ACCESS of read-write. The
+            MIN-ACCESS remains read-only.
+
+        (5) The DESCRIPTION clause for sonetMediumTimeElapsed has
+            been updated to describe its behaviour if the duration
+            of the current interval exceeds the maximum value.
+
+        (6) The DESCRIPTION clause for sonetMediumValidIntervals
+            has been updated to describe its behaviour when some
+            intervals may be unavailable, and the object
+            sonetMediumInvalidIntervals has been added to keep
+            count of the number of missing intervals (if any).
+
+        (7) The object sonetMediumLoopbackConfig has been added
+            to enable or disable loopback configurations.
+
+        (8) Because the error count thresholds for declaring
+            severely errored seconds that are specified in ANSI
+            T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997
+            are all different from each other and from the thresholds
+            specified in RFC 1595, an enumerated INTEGER object
+            sonetSESthresholdSet has been added to allow an agent
+            to specify which threshold set is in use. Text has
+            been added to Section 3 stating that if this object is
+            not implemented the thresholds specified in RFC 1595
+            should be assumed, and the table containing those
+            thresholds has been moved to Appendix B of this memo.
+
+        (9) A column with SYNTAX TruthValue has been added to each
+            interval table.  The purpose of the additional column
+            is to indicate, for each interval, whether the data
+            is valid in the sense intended by ANSI T1.231 clause
+            9.1.2.2 [T1.231a][T1.231b]. The objects in question are:
+
+                sonetSectionIntervalValidData
+                sonetLineIntervalValidData
+                sonetFarEndLineIntervalValidData
+                sonetPathIntervalValidData
+                sonetFarEndPathIntervalValidData
+                sonetVTIntervalValidData
+                sonetFarEndVTIntervalValidData
+
+       (10) The ranges for sonetPathCurrentStatus and
+            sonetVTCurrentStatus have been made consistent
+            with the DESCRIPTION clauses.
+
+       (11) The conformance information has been updated. Previous
+            conformance information from RFC 1595 has been
+            deprecated. Some typographical errors in the deprecated
+            section have been corrected in order to prevent
+            MIB compilation errors."
+
+    REVISION      "199401030000Z"
+    DESCRIPTION
+        "The RFC 1595 version of this MIB module."
+    ::= { transmission 39 }
+
+--  This is the MIB module for the SONET/SDH objects
+
+sonetObjects      OBJECT IDENTIFIER ::= { sonetMIB 1 }
+
+sonetObjectsPath  OBJECT IDENTIFIER ::= { sonetMIB 2 }
+
+sonetObjectsVT    OBJECT IDENTIFIER ::= { sonetMIB 3 }
+
+-- groups in the SONET/SDH MIB module
+
+sonetMedium        OBJECT IDENTIFIER ::= { sonetObjects 1 }
+
+sonetSection       OBJECT IDENTIFIER ::= { sonetObjects 2 }
+
+sonetLine          OBJECT IDENTIFIER ::= { sonetObjects 3 }
+
+sonetFarEndLine    OBJECT IDENTIFIER ::= { sonetObjects 4 }
+
+sonetPath          OBJECT IDENTIFIER ::= { sonetObjectsPath 1 }
+
+sonetFarEndPath    OBJECT IDENTIFIER ::= { sonetObjectsPath 2 }
+
+sonetVT            OBJECT IDENTIFIER ::= { sonetObjectsVT 1 }
+
+sonetFarEndVT      OBJECT IDENTIFIER ::= { sonetObjectsVT 2 }
+
+-- the SONET/SDH Medium group
+
+-- SONET/SDH interfaces for some applications may be electrical
+-- interfaces and not optical interfaces.  This group handles
+-- the configuration information for both optical SONET/SDH
+-- interfaces and electrical SONET/SDH interfaces.
+
+sonetMediumTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetMediumEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "The SONET/SDH Medium table."
+     ::= { sonetMedium 1 }
+
+sonetMediumEntry OBJECT-TYPE
+    SYNTAX  SonetMediumEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "An entry in the SONET/SDH Medium table."
+    INDEX   { ifIndex }
+     ::= { sonetMediumTable 1 }
+
+SonetMediumEntry ::=
+    SEQUENCE {
+         sonetMediumType               INTEGER,
+         sonetMediumTimeElapsed        Integer32,
+         sonetMediumValidIntervals     Integer32,
+         sonetMediumLineCoding         INTEGER,
+         sonetMediumLineType           INTEGER,
+         sonetMediumCircuitIdentifier  DisplayString,
+         sonetMediumInvalidIntervals   Integer32,
+         sonetMediumLoopbackConfig     BITS
+    }
+
+sonetMediumType OBJECT-TYPE
+    SYNTAX  INTEGER  {
+               sonet(1),
+               sdh(2)
+
+            }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+       "This variable identifies whether a SONET
+       or a SDH signal is used across this interface."
+    ::= { sonetMediumEntry 1 }
+
+sonetMediumTimeElapsed OBJECT-TYPE
+    SYNTAX  Integer32 (1..900)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The number of seconds, including partial seconds,
+       that have elapsed since the beginning of the current
+       measurement period. If, for some reason, such as an
+       adjustment in the system's time-of-day clock, the
+       current interval exceeds the maximum value, the
+       agent will return the maximum value."
+    ::= { sonetMediumEntry 2 }
+
+sonetMediumValidIntervals OBJECT-TYPE
+    SYNTAX  Integer32 (0..96)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The number of previous 15-minute intervals
+       for which data was collected.
+       A SONET/SDH interface must be capable
+       of supporting at least n intervals.
+       The minimum value of n is 4.
+       The default of n is 32.
+       The maximum value of n is 96.
+       The value will be <n> unless the measurement was
+       (re-)started within the last (<n>*15) minutes, in which
+       case the value will be the number of complete 15
+       minute intervals for which the agent has at least
+       some data. In certain cases (e.g., in the case
+       where the agent is a proxy) it is possible that some
+       intervals are unavailable.  In this case, this
+       interval is the maximum interval number for
+       which data is available. "
+    ::= { sonetMediumEntry 3 }
+
+sonetMediumLineCoding OBJECT-TYPE
+    SYNTAX  INTEGER {
+                sonetMediumOther(1),
+                sonetMediumB3ZS(2),
+                sonetMediumCMI(3),
+                sonetMediumNRZ(4),
+                sonetMediumRZ(5)
+            }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+       "This variable describes the line coding for
+       this interface. The B3ZS and CMI are used for
+       electrical SONET/SDH signals (STS-1 and STS-3).
+       The Non-Return to Zero (NRZ) and the Return
+       to Zero are used for optical SONET/SDH signals."
+    ::= { sonetMediumEntry 4 }
+
+sonetMediumLineType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                sonetOther(1),
+                sonetShortSingleMode(2),
+                sonetLongSingleMode(3),
+                sonetMultiMode(4),
+                sonetCoax(5),
+                sonetUTP(6)
+            }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+       "This variable describes the line type for
+       this interface. The line types are
+       Short and Long Range
+       Single Mode fiber or Multi-Mode fiber interfaces,
+       and coax and UTP for electrical interfaces.  The
+       value sonetOther should be used when the Line Type is
+       not one of the listed values."
+    ::= { sonetMediumEntry 5 }
+
+sonetMediumCircuitIdentifier OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+       "This variable contains the transmission
+       vendor's circuit identifier, for the
+       purpose of facilitating troubleshooting.
+       Note that the circuit identifier, if available,
+       is also represented by ifPhysAddress."
+    ::= { sonetMediumEntry 6 }
+
+sonetMediumInvalidIntervals OBJECT-TYPE
+    SYNTAX  Integer32 (0..96)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The number of intervals in the range from
+        0 to sonetMediumValidIntervals for which no
+        data is available. This object will typically
+        be zero except in cases where the data for some
+        intervals are not available (e.g., in proxy
+        situations)."
+    ::= { sonetMediumEntry 7 }
+
+sonetMediumLoopbackConfig OBJECT-TYPE
+    SYNTAX      BITS {
+                  sonetNoLoop(0),
+                  sonetFacilityLoop(1),
+                  sonetTerminalLoop(2),
+                  sonetOtherLoop(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The current loopback state of the SONET/SDH interface.  The
+        values mean:
+
+          sonetNoLoop
+             Not in the loopback state. A device that is not
+             capable of performing a loopback on this interface
+             shall always return this value.
+
+          sonetFacilityLoop
+             The received signal at this interface is looped back
+             out through the corresponding transmitter in the return
+             direction.
+
+          sonetTerminalLoop
+             The signal that is about to be transmitted is connected
+             to the associated incoming receiver.
+
+          sonetOtherLoop
+             Loopbacks that are not defined here."
+    ::= { sonetMediumEntry 8 }
+
+sonetSESthresholdSet    OBJECT-TYPE
+    SYNTAX   INTEGER {
+               other(1),
+               bellcore1991(2),
+               ansi1993(3),
+               itu1995(4),
+               ansi1997(5)
+                      }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+      "An enumerated integer indicating which
+       recognized set of SES thresholds that
+       the agent uses for determining severely
+       errored seconds and unavailable time.
+
+       other(1)
+         None of the following.
+
+       bellcore1991(2)
+         Bellcore TR-NWT-000253, 1991 [TR253], or
+         ANSI T1M1.3/93-005R2, 1993 [T1M1.3].
+         See also Appendix B.
+
+       ansi1993(3)
+         ANSI T1.231, 1993 [T1.231a], or
+         Bellcore GR-253-CORE, Issue 2, 1995 [GR253]
+
+       itu1995(4)
+         ITU Recommendation G.826, 1995 [G.826]
+
+       ansi1997(5)
+         ANSI T1.231, 1997 [T1.231b]
+
+       If a manager changes the value of this
+       object then the SES statistics collected
+       prior to this change must be invalidated."
+     ::= { sonetMedium 2 }
+
+-- the SONET/SDH Section group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH Section Current Table
+-- - the SONET/SDH Section Interval Table
+
+-- the SONET/SDH Section Current Table
+
+-- The SONET/SDH Section
+-- current table contains various statistics
+-- being collected for the current 15 minute interval.
+
+sonetSectionCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetSectionCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "The SONET/SDH Section Current table."
+     ::= { sonetSection 1 }
+
+sonetSectionCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetSectionCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "An entry in the SONET/SDH Section Current table."
+    INDEX   { ifIndex }
+     ::= { sonetSectionCurrentTable 1 }
+
+SonetSectionCurrentEntry ::=
+    SEQUENCE {
+        sonetSectionCurrentStatus   Integer32,
+        sonetSectionCurrentESs      PerfCurrentCount,
+        sonetSectionCurrentSESs     PerfCurrentCount,
+        sonetSectionCurrentSEFSs    PerfCurrentCount,
+        sonetSectionCurrentCVs      PerfCurrentCount
+    }
+
+sonetSectionCurrentStatus OBJECT-TYPE
+    SYNTAX  Integer32 (1..6)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates the
+       status of the interface.
+       The sonetSectionCurrentStatus
+       is a bit map represented
+       as a sum, therefore,
+       it can represent multiple defects
+       simultaneously.
+       The sonetSectionNoDefect should be
+       set if and only if
+       no other flag is set.
+
+       The various bit positions are:
+             1   sonetSectionNoDefect
+             2   sonetSectionLOS
+             4   sonetSectionLOF"
+     ::= { sonetSectionCurrentEntry 1 }
+
+sonetSectionCurrentESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of Errored
+       Seconds encountered by a SONET/SDH
+       Section in the current 15 minute interval."
+     ::= { sonetSectionCurrentEntry 2 }
+
+sonetSectionCurrentSESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Severely Errored Seconds
+       encountered by a SONET/SDH Section in the current 15
+       minute interval."
+     ::= { sonetSectionCurrentEntry 3 }
+
+sonetSectionCurrentSEFSs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Severely Errored Framing Seconds
+       encountered by a SONET/SDH Section in the current
+       15 minute interval."
+    ::= { sonetSectionCurrentEntry 4 }
+
+sonetSectionCurrentCVs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of Coding
+       Violations encountered by a
+       SONET/SDH Section in the current 15 minute interval."
+     ::= { sonetSectionCurrentEntry 5 }
+
+-- the SONET/SDH Section Interval Table
+
+-- The SONET/SDH Section Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetSectionIntervalTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetSectionIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "The SONET/SDH Section Interval table."
+     ::= { sonetSection 2 }
+
+sonetSectionIntervalEntry OBJECT-TYPE
+    SYNTAX  SonetSectionIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "An entry in the SONET/SDH Section Interval table."
+    INDEX   { ifIndex,
+              sonetSectionIntervalNumber }
+     ::= { sonetSectionIntervalTable 1 }
+
+SonetSectionIntervalEntry ::=
+    SEQUENCE {
+         sonetSectionIntervalNumber  Integer32,
+         sonetSectionIntervalESs     PerfIntervalCount,
+         sonetSectionIntervalSESs    PerfIntervalCount,
+         sonetSectionIntervalSEFSs   PerfIntervalCount,
+         sonetSectionIntervalCVs     PerfIntervalCount,
+         sonetSectionIntervalValidData  TruthValue
+    }
+
+sonetSectionIntervalNumber OBJECT-TYPE
+    SYNTAX  Integer32 (1..96)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "A number between 1 and 96, which identifies the
+      interval for which the set of statistics is available.
+      The interval identified by 1 is the most recently
+      completed 15 minute interval,
+      and the interval identified
+      by N is the interval immediately preceding the
+      one identified
+      by N-1."
+     ::= { sonetSectionIntervalEntry 1 }
+
+sonetSectionIntervalESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Errored Seconds encountered
+       by a SONET/SDH Section in a
+       particular 15-minute interval
+       in the past 24 hours."
+     ::= { sonetSectionIntervalEntry 2 }
+
+sonetSectionIntervalSESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Severely Errored Seconds
+       encountered by a SONET/SDH Section in a
+       particular 15-minute interval
+       in the past 24 hours."
+    ::= { sonetSectionIntervalEntry 3 }
+
+sonetSectionIntervalSEFSs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Severely Errored Framing Seconds
+       encountered by a SONET/SDH Section in a
+       particular 15-minute interval
+       in the past 24 hours."
+    ::= { sonetSectionIntervalEntry 4 }
+
+sonetSectionIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of Coding
+       Violations encountered by a
+       SONET/SDH Section in a particular 15-minute interval
+       in the past 24 hours."
+    ::= { sonetSectionIntervalEntry 5 }
+
+sonetSectionIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+        interval is valid."
+    ::= { sonetSectionIntervalEntry 6 }
+
+-- the SONET/SDH Line group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH Line Current Table
+-- - the SONET/SDH Line Interval Table
+
+-- the SONET/SDH Line Current Table
+
+-- The SONET/SDH Line
+-- current table contains various statistics
+-- being collected for the current 15 minute interval.
+
+sonetLineCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetLineCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "The SONET/SDH Line Current table."
+    ::= { sonetLine 1 }
+
+sonetLineCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetLineCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "An entry in the SONET/SDH Line Current table."
+    INDEX   { ifIndex }
+    ::= { sonetLineCurrentTable 1 }
+
+SonetLineCurrentEntry ::=
+    SEQUENCE {
+         sonetLineCurrentStatus    Integer32,
+         sonetLineCurrentESs       PerfCurrentCount,
+         sonetLineCurrentSESs      PerfCurrentCount,
+         sonetLineCurrentCVs       PerfCurrentCount,
+         sonetLineCurrentUASs      PerfCurrentCount
+     }
+
+sonetLineCurrentStatus OBJECT-TYPE
+    SYNTAX  Integer32 (1..6)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates the
+       status of the interface.
+       The sonetLineCurrentStatus
+       is a bit map represented
+       as a sum, therefore,
+       it can represent multiple defects
+       simultaneously.
+       The sonetLineNoDefect should be
+       set if and only if
+       no other flag is set.
+
+       The various bit positions are:
+        1   sonetLineNoDefect
+        2   sonetLineAIS
+        4   sonetLineRDI"
+     ::= { sonetLineCurrentEntry 1 }
+
+sonetLineCurrentESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Errored
+     Seconds encountered by a SONET/SDH
+     Line in the current 15 minute interval."
+    ::= { sonetLineCurrentEntry 2 }
+
+sonetLineCurrentSESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Severely Errored Seconds
+     encountered by a SONET/SDH Line in the current 15
+     minute
+     interval."
+    ::= { sonetLineCurrentEntry 3 }
+
+sonetLineCurrentCVs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Coding
+     Violations encountered by a
+     SONET/SDH Line in the current 15 minute interval."
+    ::= { sonetLineCurrentEntry 4 }
+
+sonetLineCurrentUASs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Unavailable Seconds
+     encountered by a SONET/SDH Line in the current 15
+     minute
+     interval."
+    ::= { sonetLineCurrentEntry 5 }
+
+-- the SONET/SDH Line Interval Table
+
+-- The SONET/SDH Line Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetLineIntervalTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetLineIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "The SONET/SDH Line Interval table."
+     ::= { sonetLine 2 }
+
+sonetLineIntervalEntry OBJECT-TYPE
+    SYNTAX  SonetLineIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "An entry in the SONET/SDH Line Interval table."
+   INDEX   { ifIndex,
+             sonetLineIntervalNumber }
+   ::= { sonetLineIntervalTable 1 }
+
+SonetLineIntervalEntry ::=
+    SEQUENCE {
+        sonetLineIntervalNumber    Integer32,
+        sonetLineIntervalESs       PerfIntervalCount,
+        sonetLineIntervalSESs      PerfIntervalCount,
+        sonetLineIntervalCVs       PerfIntervalCount,
+        sonetLineIntervalUASs      PerfIntervalCount,
+        sonetLineIntervalValidData TruthValue
+    }
+
+sonetLineIntervalNumber OBJECT-TYPE
+    SYNTAX  Integer32 (1..96)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "A number between 1 and 96, which identifies the
+        interval for which the set of statistics is available.
+        The interval identified by 1 is the most recently
+        completed 15 minute interval,
+        and the interval identified
+        by N is the interval immediately preceding the
+        one identified
+        by N-1."
+     ::= { sonetLineIntervalEntry 1 }
+
+sonetLineIntervalESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Errored Seconds encountered
+       by a SONET/SDH Line in a
+       particular 15-minute interval
+       in the past 24 hours."
+     ::= { sonetLineIntervalEntry 2 }
+
+sonetLineIntervalSESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "The counter associated with the number of
+       Severely Errored Seconds
+       encountered by a SONET/SDH Line in a
+       particular 15-minute interval
+       in the past 24 hours."
+      ::= { sonetLineIntervalEntry 3 }
+
+sonetLineIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The counter associated with the number of Coding
+      Violations encountered by a
+      SONET/SDH Line in a
+      particular 15-minute interval
+      in the past 24 hours."
+    ::= { sonetLineIntervalEntry 4 }
+
+sonetLineIntervalUASs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "The counter associated with the
+      number of Unavailable Seconds
+      encountered by a SONET/SDH Line in
+      a particular 15-minute interval
+      in the past 24 hours."
+    ::= { sonetLineIntervalEntry 5 }
+
+sonetLineIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+        interval is valid."
+    ::= { sonetLineIntervalEntry 6 }
+
+-- The SONET/SDH Far End Line group.
+-- This group may only be implemented by SONET/SDH (LTEs)
+-- systems that provide for a far end block error (FEBE)
+-- information at the SONET/SDH Line Layer.
+
+-- This group consists of two tables:
+--    SONET/SDH Far End Line Current Table
+--    SONET/SDH Far End Line Interval Table
+
+-- The SONET/SDH Far End Line Current Table
+
+-- The SONET/SDH Far End Line Current table contains
+-- various statistics being
+-- collected for the current 15 minute interval.
+-- The statistics are collected from the far end
+
+-- block error code (FEBE)
+-- within the third Z2 byte of the Line Overhead
+-- in Broadband ISDN applications.
+-- The definitions are the same as described for
+-- the near-end information.
+
+sonetFarEndLineCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetFarEndLineCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "The SONET/SDH Far End Line Current table."
+    ::= { sonetFarEndLine 1 }
+
+sonetFarEndLineCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetFarEndLineCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "An entry in the SONET/SDH Far End Line Current table."
+    INDEX   { ifIndex }
+    ::= { sonetFarEndLineCurrentTable 1 }
+
+SonetFarEndLineCurrentEntry ::=
+    SEQUENCE {
+        sonetFarEndLineCurrentESs       PerfCurrentCount,
+        sonetFarEndLineCurrentSESs      PerfCurrentCount,
+        sonetFarEndLineCurrentCVs       PerfCurrentCount,
+        sonetFarEndLineCurrentUASs      PerfCurrentCount
+       }
+
+sonetFarEndLineCurrentESs OBJECT-TYPE
+   SYNTAX  PerfCurrentCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of Far
+       End Errored Seconds encountered by a SONET/SDH
+       interface in the current 15 minute interval."
+   ::= { sonetFarEndLineCurrentEntry 1 }
+
+sonetFarEndLineCurrentSESs OBJECT-TYPE
+   SYNTAX  PerfCurrentCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Severely Errored Seconds
+
+       encountered by a SONET/SDH Medium/Section/Line
+       interface in the current 15 minute
+       interval."
+   ::= { sonetFarEndLineCurrentEntry 2 }
+
+sonetFarEndLineCurrentCVs OBJECT-TYPE
+   SYNTAX  PerfCurrentCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Coding Violations reported via
+       the far end block error count
+       encountered by a
+       SONET/SDH Medium/Section/Line
+       interface in the current 15 minute interval."
+   ::= { sonetFarEndLineCurrentEntry 3 }
+
+sonetFarEndLineCurrentUASs OBJECT-TYPE
+   SYNTAX  PerfCurrentCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Unavailable Seconds
+       encountered by a
+       SONET/SDH Medium/Section/Line
+       interface in the current 15 minute interval."
+   ::= { sonetFarEndLineCurrentEntry 4 }
+
+-- The SONET/SDH Far End Line Interval Table
+
+-- The SONET/SDH Far End Line Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetFarEndLineIntervalTable OBJECT-TYPE
+   SYNTAX  SEQUENCE OF SonetFarEndLineIntervalEntry
+   MAX-ACCESS  not-accessible
+   STATUS  current
+   DESCRIPTION
+      "The SONET/SDH Far End Line Interval table."
+   ::= { sonetFarEndLine 2 }
+
+sonetFarEndLineIntervalEntry OBJECT-TYPE
+   SYNTAX  SonetFarEndLineIntervalEntry
+   MAX-ACCESS  not-accessible
+   STATUS  current
+   DESCRIPTION
+     "An entry in the SONET/SDH Far
+     End Line Interval table."
+   INDEX   { ifIndex,
+             sonetFarEndLineIntervalNumber }
+   ::= { sonetFarEndLineIntervalTable 1 }
+
+SonetFarEndLineIntervalEntry ::=
+    SEQUENCE {
+         sonetFarEndLineIntervalNumber    Integer32,
+         sonetFarEndLineIntervalESs       PerfIntervalCount,
+         sonetFarEndLineIntervalSESs      PerfIntervalCount,
+         sonetFarEndLineIntervalCVs       PerfIntervalCount,
+         sonetFarEndLineIntervalUASs      PerfIntervalCount,
+         sonetFarEndLineIntervalValidData TruthValue
+    }
+
+sonetFarEndLineIntervalNumber OBJECT-TYPE
+   SYNTAX  Integer32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS  current
+   DESCRIPTION
+         "A number between 1 and 96, which identifies the
+         interval for which the set of statistics is available.
+         The interval identified by 1 is the most recently
+         completed 15 minute interval,
+         and the interval identified
+         by N is the interval immediately preceding the
+         one identified
+         by N-1."
+   ::= { sonetFarEndLineIntervalEntry 1 }
+
+sonetFarEndLineIntervalESs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+        "The counter associated with the number of
+        Far End Errored Seconds encountered
+        by a SONET/SDH Line
+        interface in a particular 15-minute interval
+        in the past 24 hours."
+  ::= { sonetFarEndLineIntervalEntry 2 }
+
+sonetFarEndLineIntervalSESs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+        "The counter associated with the number of
+        Far End Severely Errored Seconds
+        encountered by a SONET/SDH Line
+        interface in a particular 15-minute interval
+        in the past 24 hours."
+  ::= { sonetFarEndLineIntervalEntry 3 }
+
+sonetFarEndLineIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The counter associated with the number of
+         Far End Coding Violations reported via
+         the far end block error count
+         encountered by a
+         SONET/SDH Line
+         interface in a particular 15-minute interval
+         in the past 24 hours."
+    ::= { sonetFarEndLineIntervalEntry 4 }
+
+sonetFarEndLineIntervalUASs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Unavailable Seconds
+       encountered by a
+       SONET/SDH Line
+       interface in a particular 15-minute interval
+       in the past 24 hours."
+   ::= { sonetFarEndLineIntervalEntry 5 }
+
+sonetFarEndLineIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+        interval is valid."
+    ::= { sonetFarEndLineIntervalEntry 6 }
+
+-- the SONET/SDH Path group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH Path Current Table
+-- - the SONET/SDH Path Interval Table
+
+-- the SONET/SDH Path Current Table
+
+-- The SONET/SDH Path
+-- current table contains various statistics
+-- being collected for the current 15 minute interval.
+
+sonetPathCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetPathCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "The SONET/SDH Path Current table."
+::= { sonetPath 1 }
+
+sonetPathCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetPathCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "An entry in the SONET/SDH Path Current table."
+    INDEX   { ifIndex }
+::= { sonetPathCurrentTable 1 }
+
+SonetPathCurrentEntry ::=
+    SEQUENCE {
+        sonetPathCurrentWidth      INTEGER,
+        sonetPathCurrentStatus     Integer32,
+        sonetPathCurrentESs        PerfCurrentCount,
+        sonetPathCurrentSESs       PerfCurrentCount,
+        sonetPathCurrentCVs        PerfCurrentCount,
+        sonetPathCurrentUASs       PerfCurrentCount
+    }
+
+sonetPathCurrentWidth OBJECT-TYPE
+    SYNTAX  INTEGER  {
+            sts1(1),
+            sts3cSTM1(2),
+            sts12cSTM4(3),
+            sts24c(4),
+            sts48cSTM16(5),
+            sts192cSTM64(6),
+            sts768cSTM256(7)
+     }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+     "A value that indicates the type of the SONET/SDH
+     Path.  For SONET, the assigned types are
+     the STS-Nc SPEs, where N = 1, 3, 12, 24, 48, 192 and 768.
+     STS-1 is equal to 51.84 Mbps.  For SDH, the assigned
+     types are the STM-Nc VCs, where N = 1, 4, 16, 64 and 256."
+::= { sonetPathCurrentEntry 1 }
+
+sonetPathCurrentStatus OBJECT-TYPE
+    SYNTAX  Integer32 (1..62)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "This variable indicates the
+      status of the interface.
+      The sonetPathCurrentStatus
+      is a bit map represented
+      as a sum, therefore,
+      it can represent multiple defects
+      simultaneously.
+      The sonetPathNoDefect should be
+      set if and only if
+      no other flag is set.
+
+      The various bit positions are:
+         1   sonetPathNoDefect
+         2   sonetPathSTSLOP
+         4   sonetPathSTSAIS
+         8   sonetPathSTSRDI
+        16   sonetPathUnequipped
+        32   sonetPathSignalLabelMismatch"
+::= { sonetPathCurrentEntry 2 }
+
+sonetPathCurrentESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Errored
+     Seconds encountered by a SONET/SDH
+     Path in the current 15 minute interval."
+::= { sonetPathCurrentEntry 3 }
+
+sonetPathCurrentSESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Severely Errored Seconds
+     encountered by a SONET/SDH Path in the current 15
+     minute
+     interval."
+::= { sonetPathCurrentEntry 4 }
+
+sonetPathCurrentCVs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Coding
+     Violations encountered by a
+     SONET/SDH Path in the current 15 minute interval."
+::= { sonetPathCurrentEntry 5 }
+
+sonetPathCurrentUASs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Unavailable Seconds
+     encountered by a Path in the current
+     15 minute interval."
+::= { sonetPathCurrentEntry 6 }
+
+-- the SONET/SDH Path Interval Table
+
+-- The SONET/SDH Path Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetPathIntervalTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetPathIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "The SONET/SDH Path Interval table."
+::= { sonetPath 2 }
+
+sonetPathIntervalEntry OBJECT-TYPE
+    SYNTAX  SonetPathIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "An entry in the SONET/SDH Path Interval table."
+    INDEX   { ifIndex,
+              sonetPathIntervalNumber }
+::= { sonetPathIntervalTable 1 }
+
+SonetPathIntervalEntry ::=
+    SEQUENCE {
+         sonetPathIntervalNumber     Integer32,
+         sonetPathIntervalESs        PerfIntervalCount,
+         sonetPathIntervalSESs       PerfIntervalCount,
+         sonetPathIntervalCVs        PerfIntervalCount,
+         sonetPathIntervalUASs       PerfIntervalCount,
+         sonetPathIntervalValidData  TruthValue
+    }
+
+sonetPathIntervalNumber OBJECT-TYPE
+    SYNTAX  Integer32 (1..96)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "A number between 1 and 96, which identifies the
+       interval for which the set of statistics is available.
+       The interval identified by 1 is the most recently
+       completed 15 minute interval,
+       and the interval identified
+       by N is the interval immediately preceding the
+       one identified
+       by N-1."
+::= { sonetPathIntervalEntry 1 }
+
+sonetPathIntervalESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Errored Seconds encountered
+     by a SONET/SDH Path in a
+     particular 15-minute interval
+     in the past 24 hours."
+::= { sonetPathIntervalEntry 2 }
+
+sonetPathIntervalSESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Severely Errored Seconds
+     encountered by a SONET/SDH Path in
+     a particular 15-minute interval
+     in the past 24 hours."
+::= { sonetPathIntervalEntry 3 }
+
+sonetPathIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Coding
+     Violations encountered by a
+     SONET/SDH Path in a particular 15-minute interval
+     in the past 24 hours."
+::= { sonetPathIntervalEntry 4 }
+
+sonetPathIntervalUASs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Unavailable Seconds
+     encountered by a Path in a
+     particular 15-minute interval
+     in the past 24 hours."
+::= { sonetPathIntervalEntry 5 }
+
+sonetPathIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+
+        interval is valid."
+    ::= { sonetPathIntervalEntry 6 }
+
+-- The SONET/SDH Far End Path group
+
+-- This group consists of two tables:
+--  - SONET/SDH Far End Path Current Table
+--  - SONET/SDH Far End Path Interval Table
+
+-- The SONET/SDH Far End Path Current Table
+
+-- The SONET/SDH Far End Path Current table
+-- contains various statistics
+-- being collected for the current 15 minute interval.
+-- The statistics are collected from
+-- the far end block error code
+-- (FEBE) within the G1 byte of the Path Overhead.
+-- The definitions are the same as described for
+-- the near-end information.
+
+sonetFarEndPathCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetFarEndPathCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+         "The SONET/SDH Far End Path Current table."
+    ::= { sonetFarEndPath 1 }
+
+sonetFarEndPathCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetFarEndPathCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+         "An entry in the SONET/SDH Far End Path Current table."
+    INDEX   { ifIndex }
+    ::= { sonetFarEndPathCurrentTable 1 }
+
+SonetFarEndPathCurrentEntry ::=
+    SEQUENCE {
+        sonetFarEndPathCurrentESs       PerfCurrentCount,
+        sonetFarEndPathCurrentSESs      PerfCurrentCount,
+        sonetFarEndPathCurrentCVs       PerfCurrentCount,
+        sonetFarEndPathCurrentUASs      PerfCurrentCount
+    }
+
+sonetFarEndPathCurrentESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The counter associated with the number of Far
+         End Errored Seconds encountered by a SONET/SDH
+         interface in the current 15 minute interval."
+    ::= { sonetFarEndPathCurrentEntry 1 }
+
+sonetFarEndPathCurrentSESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The counter associated with the number of
+         Far End Severely Errored Seconds
+         encountered by a SONET/SDH Path
+         interface in the current 15 minute
+         interval."
+    ::= { sonetFarEndPathCurrentEntry 2 }
+
+sonetFarEndPathCurrentCVs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The counter associated with the number of
+         Far End Coding Violations reported via
+         the far end block error count
+         encountered by a
+         SONET/SDH Path interface in
+         the current 15 minute interval."
+    ::= { sonetFarEndPathCurrentEntry 3 }
+
+sonetFarEndPathCurrentUASs OBJECT-TYPE
+   SYNTAX  PerfCurrentCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Unavailable Seconds
+       encountered by a
+       SONET/SDH Path interface in
+       the current 15 minute interval."
+   ::= { sonetFarEndPathCurrentEntry 4 }
+
+-- The SONET/SDH Far End Path Interval Table
+
+-- The SONET/SDH Far End Path Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetFarEndPathIntervalTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetFarEndPathIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The SONET/SDH Far End Path Interval table."
+    ::= { sonetFarEndPath 2 }
+
+sonetFarEndPathIntervalEntry OBJECT-TYPE
+    SYNTAX  SonetFarEndPathIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "An entry in the SONET/SDH Far
+       End Path Interval table."
+    INDEX   { ifIndex,
+              sonetFarEndPathIntervalNumber }
+    ::= { sonetFarEndPathIntervalTable 1 }
+
+SonetFarEndPathIntervalEntry ::=
+    SEQUENCE {
+         sonetFarEndPathIntervalNumber     Integer32,
+         sonetFarEndPathIntervalESs        PerfIntervalCount,
+         sonetFarEndPathIntervalSESs       PerfIntervalCount,
+         sonetFarEndPathIntervalCVs        PerfIntervalCount,
+         sonetFarEndPathIntervalUASs       PerfIntervalCount,
+         sonetFarEndPathIntervalValidData  TruthValue
+    }
+
+sonetFarEndPathIntervalNumber OBJECT-TYPE
+   SYNTAX  Integer32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS  current
+   DESCRIPTION
+        "A number between 1 and 96, which identifies the
+        interval for which the set of statistics is available.
+
+        The interval identified by 1 is the most recently
+        completed 15 minute interval,
+        and the interval identified
+        by N is the interval immediately preceding the
+        one identified
+        by N-1."
+   ::= { sonetFarEndPathIntervalEntry 1 }
+
+sonetFarEndPathIntervalESs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+        "The counter associated with the number of
+        Far End Errored Seconds encountered
+        by a SONET/SDH Path interface in a
+        particular 15-minute interval
+        in the past 24 hours."
+   ::= { sonetFarEndPathIntervalEntry 2 }
+
+sonetFarEndPathIntervalSESs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+        "The counter associated with the number of
+        Far End Severely Errored Seconds
+        encountered by a SONET/SDH Path interface
+        in a particular 15-minute interval
+        in the past 24 hours."
+   ::= { sonetFarEndPathIntervalEntry 3 }
+
+sonetFarEndPathIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The counter associated with the number of
+         Far End Coding Violations reported via
+         the far end block error count
+         encountered by a
+         SONET/SDH Path interface
+         in a particular 15-minute interval
+         in the past 24 hours."
+    ::= { sonetFarEndPathIntervalEntry 4 }
+
+sonetFarEndPathIntervalUASs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Unavailable Seconds
+       encountered by a
+       SONET/SDH Path interface in
+       a particular 15-minute interval
+       in the past 24 hours."
+   ::= { sonetFarEndPathIntervalEntry 5 }
+
+sonetFarEndPathIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+        interval is valid."
+    ::= { sonetFarEndPathIntervalEntry 6 }
+
+-- the SONET/SDH Virtual Tributary group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH VT Current Table
+-- - the SONET/SDH VT Interval Table
+
+-- Corresponding SDH signals for SONET VTs are
+-- as follows:
+
+-- A VT1.5 = TU11
+-- A VT2 = TU12
+-- A VT3 = none
+-- none  = TU3
+-- A VT6 = TU2
+
+-- the SONET/SDH VT Current Table
+
+-- The SONET/SDH VT current table
+-- contains various statistics
+-- being collected for the
+-- current 15 minute interval.
+
+sonetVTCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetVTCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "The SONET/SDH VT Current table."
+::= { sonetVT 1 }
+
+sonetVTCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetVTCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "An entry in the SONET/SDH VT Current table."
+    INDEX   { ifIndex }
+::= { sonetVTCurrentTable 1 }
+
+SonetVTCurrentEntry ::=
+    SEQUENCE {
+        sonetVTCurrentWidth      INTEGER,
+        sonetVTCurrentStatus     Integer32,
+        sonetVTCurrentESs        PerfCurrentCount,
+        sonetVTCurrentSESs       PerfCurrentCount,
+        sonetVTCurrentCVs        PerfCurrentCount,
+        sonetVTCurrentUASs       PerfCurrentCount
+    }
+
+sonetVTCurrentWidth OBJECT-TYPE
+    SYNTAX  INTEGER {
+            vtWidth15VC11(1),
+            vtWidth2VC12(2),
+            vtWidth3(3),
+            vtWidth6VC2(4),
+            vtWidth6c(5)
+         }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "A value that indicates the type of the SONET
+     VT and SDH VC.  Assigned widths are
+     VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c."
+::= { sonetVTCurrentEntry 1 }
+
+sonetVTCurrentStatus OBJECT-TYPE
+    SYNTAX  Integer32 (1..126)
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+      "This variable indicates the
+      status of the interface.
+      The sonetVTCurrentStatus
+      is a bit map represented
+      as a sum, therefore,
+      it can represent multiple defects
+      and failures
+      simultaneously.
+      The sonetVTNoDefect should be
+      set if and only if
+      no other flag is set.
+
+      The various bit positions are:
+         1   sonetVTNoDefect
+         2   sonetVTLOP
+         4   sonetVTPathAIS
+         8   sonetVTPathRDI
+        16   sonetVTPathRFI
+        32   sonetVTUnequipped
+        64   sonetVTSignalLabelMismatch"
+::= { sonetVTCurrentEntry 2 }
+
+sonetVTCurrentESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Errored
+     Seconds encountered by a SONET/SDH
+     VT in the current 15 minute interval."
+::= { sonetVTCurrentEntry 3 }
+
+sonetVTCurrentSESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Severely Errored Seconds
+     encountered by a SONET/SDH VT in the current 15 minute
+     interval."
+::= { sonetVTCurrentEntry 4 }
+
+sonetVTCurrentCVs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Coding
+     Violations encountered by a
+     SONET/SDH VT in the current 15 minute interval."
+::= { sonetVTCurrentEntry 5 }
+
+sonetVTCurrentUASs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Unavailable Seconds
+     encountered by a VT in the current
+     15 minute interval."
+::= { sonetVTCurrentEntry 6 }
+
+-- the SONET/SDH VT Interval Table
+
+-- The SONET/SDH VT Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetVTIntervalTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetVTIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "The SONET/SDH VT Interval table."
+::= { sonetVT 2 }
+
+sonetVTIntervalEntry OBJECT-TYPE
+    SYNTAX  SonetVTIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+     "An entry in the SONET/SDH VT Interval table."
+    INDEX   { ifIndex,
+              sonetVTIntervalNumber }
+::= { sonetVTIntervalTable 1 }
+
+SonetVTIntervalEntry ::=
+    SEQUENCE {
+        sonetVTIntervalNumber     Integer32,
+        sonetVTIntervalESs        PerfIntervalCount,
+        sonetVTIntervalSESs       PerfIntervalCount,
+        sonetVTIntervalCVs        PerfIntervalCount,
+        sonetVTIntervalUASs       PerfIntervalCount,
+        sonetVTIntervalValidData  TruthValue
+    }
+
+sonetVTIntervalNumber OBJECT-TYPE
+    SYNTAX  Integer32 (1..96)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "A number between 1 and 96, which identifies the
+      interval for which the set of statistics is available.
+      The interval identified by 1 is the most recently
+      completed 15 minute interval,
+      and the interval identified
+      by N is the interval immediately preceding the
+      one identified
+      by N-1."
+::= { sonetVTIntervalEntry 1 }
+
+sonetVTIntervalESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Errored Seconds encountered
+     by a SONET/SDH VT in a particular 15-minute interval
+     in the past 24 hours."
+::= { sonetVTIntervalEntry 2 }
+
+sonetVTIntervalSESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Severely Errored Seconds
+     encountered by a SONET/SDH VT
+     in a particular 15-minute interval
+
+     in the past 24 hours."
+::= { sonetVTIntervalEntry 3 }
+
+sonetVTIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of Coding
+     Violations encountered by a
+     SONET/SDH VT in a particular 15-minute interval
+     in the past 24 hours."
+::= { sonetVTIntervalEntry 4 }
+
+sonetVTIntervalUASs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+     "The counter associated with the number of
+     Unavailable Seconds
+     encountered by a VT in a particular 15-minute interval
+     in the past 24 hours."
+::= { sonetVTIntervalEntry 5 }
+
+sonetVTIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+        interval is valid."
+    ::= { sonetVTIntervalEntry 6 }
+
+-- The SONET/SDH Far End VT group
+
+-- This group consists of two tables:
+--    SONET/SDH Far End VT Current Table
+--    SONET/SDH Far End VT Interval Table
+
+-- The SONET/SDH Far End VT Current
+
+-- The SONET/SDH Far End VT Current table
+-- contains various statistics
+-- being collected for the current 15 minute interval.
+-- The statistics are collected from
+-- the far end block error code
+-- (FEBE) within the G1 byte of the VT Overhead.
+
+-- The definitions are the same as described for
+-- the near-end information.
+
+sonetFarEndVTCurrentTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetFarEndVTCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The SONET/SDH Far End VT Current table."
+    ::= { sonetFarEndVT 1 }
+
+sonetFarEndVTCurrentEntry OBJECT-TYPE
+    SYNTAX  SonetFarEndVTCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "An entry in the SONET/SDH Far End VT Current table."
+    INDEX   { ifIndex }
+    ::= { sonetFarEndVTCurrentTable 1 }
+
+SonetFarEndVTCurrentEntry ::=
+    SEQUENCE {
+        sonetFarEndVTCurrentESs       PerfCurrentCount,
+        sonetFarEndVTCurrentSESs      PerfCurrentCount,
+        sonetFarEndVTCurrentCVs       PerfCurrentCount,
+        sonetFarEndVTCurrentUASs      PerfCurrentCount
+    }
+
+sonetFarEndVTCurrentESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The counter associated with the number of Far
+        End Errored Seconds encountered by a SONET/SDH
+        interface in the current 15 minute interval."
+::= { sonetFarEndVTCurrentEntry 1 }
+
+sonetFarEndVTCurrentSESs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The counter associated with the number of
+        Far End Severely Errored Seconds
+        encountered by a SONET/SDH VT interface
+        in the current 15 minute
+        interval."
+    ::= { sonetFarEndVTCurrentEntry 2 }
+
+sonetFarEndVTCurrentCVs OBJECT-TYPE
+    SYNTAX  PerfCurrentCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The counter associated with the number of
+        Far End Coding Violations reported via
+        the far end block error count
+        encountered by a
+        SONET/SDH VT interface
+        in the current 15 minute interval."
+    ::= { sonetFarEndVTCurrentEntry 3 }
+
+sonetFarEndVTCurrentUASs OBJECT-TYPE
+   SYNTAX  PerfCurrentCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+      "The counter associated with the number of
+      Far End Unavailable Seconds
+      encountered by a
+      SONET/SDH VT interface
+      in the current 15 minute interval."
+   ::= { sonetFarEndVTCurrentEntry 4 }
+
+-- The SONET/SDH Far End VT Interval Table
+
+-- The SONET/SDH Far End VT Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation.  The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetFarEndVTIntervalTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF SonetFarEndVTIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "The SONET/SDH Far End VT Interval table."
+    ::= { sonetFarEndVT 2 }
+
+sonetFarEndVTIntervalEntry OBJECT-TYPE
+    SYNTAX  SonetFarEndVTIntervalEntry
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+      "An entry in the SONET/SDH Far
+      End VT Interval table."
+    INDEX   { ifIndex,
+              sonetFarEndVTIntervalNumber }
+    ::= { sonetFarEndVTIntervalTable 1 }
+
+SonetFarEndVTIntervalEntry ::=
+   SEQUENCE {
+         sonetFarEndVTIntervalNumber     Integer32,
+         sonetFarEndVTIntervalESs        PerfIntervalCount,
+         sonetFarEndVTIntervalSESs       PerfIntervalCount,
+         sonetFarEndVTIntervalCVs        PerfIntervalCount,
+         sonetFarEndVTIntervalUASs       PerfIntervalCount,
+         sonetFarEndVTIntervalValidData  TruthValue
+    }
+
+sonetFarEndVTIntervalNumber OBJECT-TYPE
+    SYNTAX  Integer32 (1..96)
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "A number between 1 and 96, which identifies the
+       interval for which the set of statistics is available.
+       The interval identified by 1 is the most recently
+       completed 15 minute interval,
+       and the interval identified
+       by N is the interval immediately preceding the
+       one identified
+       by N-1."
+    ::= { sonetFarEndVTIntervalEntry 1 }
+
+sonetFarEndVTIntervalESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+          "The counter associated with the number of
+          Far End Errored Seconds encountered
+          by a SONET/SDH VT interface
+          in a particular 15-minute interval
+          in the past 24 hours."
+   ::= { sonetFarEndVTIntervalEntry 2 }
+
+sonetFarEndVTIntervalSESs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+          "The counter associated with the number of
+          Far End Severely Errored Seconds
+          encountered by a SONET/SDH VT interface
+          in a particular 15-minute interval
+          in the past 24 hours."
+    ::= { sonetFarEndVTIntervalEntry 3 }
+
+sonetFarEndVTIntervalCVs OBJECT-TYPE
+    SYNTAX  PerfIntervalCount
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+         "The counter associated with the number of
+         Far End Coding Violations reported via
+         the far end block error count
+         encountered by a
+         SONET/SDH VT interface in a
+         particular 15-minute interval
+         in the past 24 hours."
+    ::= { sonetFarEndVTIntervalEntry 4 }
+
+sonetFarEndVTIntervalUASs OBJECT-TYPE
+   SYNTAX  PerfIntervalCount
+   MAX-ACCESS  read-only
+   STATUS  current
+   DESCRIPTION
+       "The counter associated with the number of
+       Far End Unavailable Seconds
+       encountered by a
+       SONET/SDH VT interface in a
+       particular 15-minute interval
+       in the past 24 hours."
+   ::= { sonetFarEndVTIntervalEntry 5 }
+
+sonetFarEndVTIntervalValidData OBJECT-TYPE
+    SYNTAX  TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "This variable indicates if the data for this
+        interval is valid."
+    ::= { sonetFarEndVTIntervalEntry 6 }
+
+-- conformance information
+
+sonetConformance OBJECT IDENTIFIER ::= { sonetMIB 4 }
+
+sonetGroups      OBJECT IDENTIFIER ::= { sonetConformance 1 }
+sonetCompliances OBJECT IDENTIFIER ::= { sonetConformance 2 }
+
+-- deprecated compliance statement
+
+sonetCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for SONET/SDH interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { sonetMediumStuff, sonetSectionStuff }
+
+        GROUP       sonetLineStuff
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+             SONET/SDH systems that terminate SONET/SDH Lines,
+             Paths or Virtual Tributaries."
+
+        GROUP       sonetFarEndLineStuff
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             SONET/SDH systems that terminate SONET/SDH Lines,
+             Paths or Virtual Tributaries, and that
+             provide for a far end block error (FEBE)
+             information at the SONET/SDH Line Layer."
+
+        GROUP       sonetPathStuff
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+             SONET/SDH systems that terminate SONET/SDH
+             Paths or Virtual Tributaries."
+
+        OBJECT      sonetPathCurrentWidth
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP       sonetFarEndPathStuff
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             SONET/SDH systems that terminate SONET/SDH
+             Paths or Virtual Tributaries, and that process
+             Far End information."
+
+        GROUP       sonetVTStuff
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+             SONET/SDH systems that terminate SONET/SDH Virtual
+             Tributaries."
+
+        OBJECT      sonetVTCurrentWidth
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP       sonetFarEndVTStuff
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             SONET/SDH systems that terminate the SONET/SDH
+             floating Virtual Tributaries, and that process
+             Far End information."
+    ::= { sonetCompliances 1 }
+
+-- current compliance statements
+
+sonetCompliance2 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SONET/SDH interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { sonetMediumStuff2, sonetSectionStuff2 }
+
+        OBJECT      sonetMediumType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      sonetMediumLineCoding
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      sonetMediumLineType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      sonetMediumCircuitIdentifier
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      sonetMediumLoopbackConfig
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      sonetSESthresholdSet
+        MIN-ACCESS  read-only
+        DESCRIPTION
+          "Write access is not required, and only one
+          of the enumerated values need be supported."
+
+        GROUP       sonetLineStuff2
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+             SONET/SDH systems that terminate SONET/SDH Lines,
+             Paths or Virtual Tributaries."
+
+        GROUP       sonetFarEndLineStuff2
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             SONET/SDH systems that terminate SONET/SDH Lines,
+             Paths or Virtual Tributaries, and that
+             provide for a far end block error (FEBE)
+             information at the SONET/SDH Line Layer."
+
+        GROUP       sonetPathStuff2
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+             SONET/SDH systems that terminate SONET/SDH
+             Paths or Virtual Tributaries."
+
+        OBJECT      sonetPathCurrentWidth
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP       sonetFarEndPathStuff2
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             SONET/SDH systems that terminate SONET/SDH
+             Paths or Virtual Tributaries, and that process
+             Far End information."
+
+        GROUP       sonetVTStuff2
+        DESCRIPTION
+            "Implementation of this group is mandatory for all
+
+             SONET/SDH systems that terminate SONET/SDH Virtual
+             Tributaries."
+
+        OBJECT      sonetVTCurrentWidth
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        GROUP       sonetFarEndVTStuff2
+        DESCRIPTION
+            "Implementation of this group is optional for all
+             SONET/SDH systems that terminate the SONET/SDH
+             floating Virtual Tributaries, and that process
+             Far End information."
+    ::= { sonetCompliances 2 }
+
+-- units of conformance
+
+-- deprecated groups
+
+sonetMediumStuff    OBJECT-GROUP
+    OBJECTS { sonetMediumType,
+              sonetMediumTimeElapsed,
+              sonetMediumValidIntervals,
+              sonetMediumLineCoding,
+              sonetMediumLineType,
+              sonetMediumCircuitIdentifier }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all SONET/SDH interfaces."
+    ::= { sonetGroups 1 }
+
+sonetSectionStuff    OBJECT-GROUP
+    OBJECTS { sonetSectionCurrentStatus,
+              sonetSectionCurrentESs,
+              sonetSectionCurrentSESs,
+              sonetSectionCurrentSEFSs,
+              sonetSectionCurrentCVs,
+              sonetSectionIntervalESs,
+              sonetSectionIntervalSESs,
+              sonetSectionIntervalSEFSs,
+              sonetSectionIntervalCVs
+ }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+
+            specific to SONET/SDH Section interfaces."
+    ::= { sonetGroups 2 }
+
+sonetLineStuff    OBJECT-GROUP
+    OBJECTS { sonetLineCurrentStatus,
+              sonetLineCurrentESs,
+              sonetLineCurrentSESs,
+              sonetLineCurrentCVs,
+              sonetLineCurrentUASs,
+              sonetLineIntervalESs,
+              sonetLineIntervalSESs,
+              sonetLineIntervalCVs,
+              sonetLineIntervalUASs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Line interfaces."
+    ::= { sonetGroups 3 }
+
+sonetFarEndLineStuff    OBJECT-GROUP
+    OBJECTS { sonetFarEndLineCurrentESs,
+              sonetFarEndLineCurrentSESs,
+              sonetFarEndLineCurrentCVs,
+              sonetFarEndLineCurrentUASs,
+              sonetFarEndLineIntervalESs,
+              sonetFarEndLineIntervalSESs,
+              sonetFarEndLineIntervalCVs,
+              sonetFarEndLineIntervalUASs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Line interfaces,
+            and maintaining Line Far End information."
+    ::= { sonetGroups 4 }
+
+sonetPathStuff    OBJECT-GROUP
+    OBJECTS { sonetPathCurrentWidth,
+              sonetPathCurrentStatus,
+              sonetPathCurrentESs,
+              sonetPathCurrentSESs,
+              sonetPathCurrentCVs,
+              sonetPathCurrentUASs,
+              sonetPathIntervalESs,
+              sonetPathIntervalSESs,
+              sonetPathIntervalCVs,
+              sonetPathIntervalUASs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Path interfaces."
+    ::= { sonetGroups 5 }
+
+sonetFarEndPathStuff    OBJECT-GROUP
+    OBJECTS { sonetFarEndPathCurrentESs,
+              sonetFarEndPathCurrentSESs,
+              sonetFarEndPathCurrentCVs,
+              sonetFarEndPathCurrentUASs,
+              sonetFarEndPathIntervalESs,
+              sonetFarEndPathIntervalSESs,
+              sonetFarEndPathIntervalCVs,
+              sonetFarEndPathIntervalUASs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Path interfaces,
+            and maintaining Path Far End information."
+    ::= { sonetGroups 6 }
+
+sonetVTStuff    OBJECT-GROUP
+    OBJECTS { sonetVTCurrentWidth,
+              sonetVTCurrentStatus,
+              sonetVTCurrentESs,
+              sonetVTCurrentSESs,
+              sonetVTCurrentCVs,
+              sonetVTCurrentUASs,
+              sonetVTIntervalESs,
+              sonetVTIntervalSESs,
+              sonetVTIntervalCVs,
+              sonetVTIntervalUASs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH VT interfaces."
+    ::= { sonetGroups 7 }
+
+sonetFarEndVTStuff    OBJECT-GROUP
+    OBJECTS { sonetFarEndVTCurrentESs,
+              sonetFarEndVTCurrentSESs,
+              sonetFarEndVTCurrentCVs,
+              sonetFarEndVTCurrentUASs,
+              sonetFarEndVTIntervalESs,
+              sonetFarEndVTIntervalSESs,
+              sonetFarEndVTIntervalCVs,
+              sonetFarEndVTIntervalUASs }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH VT interfaces,
+            and maintaining VT Far End information."
+    ::= { sonetGroups 8 }
+
+-- current groups
+
+sonetMediumStuff2    OBJECT-GROUP
+    OBJECTS { sonetMediumType,
+              sonetMediumTimeElapsed,
+              sonetMediumValidIntervals,
+              sonetMediumLineCoding,
+              sonetMediumLineType,
+              sonetMediumCircuitIdentifier,
+              sonetMediumInvalidIntervals,
+              sonetMediumLoopbackConfig,
+              sonetSESthresholdSet }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing configuration
+            information applicable to all SONET/SDH interfaces."
+    ::= { sonetGroups 9 }
+
+sonetSectionStuff2    OBJECT-GROUP
+    OBJECTS { sonetSectionCurrentStatus,
+              sonetSectionCurrentESs,
+              sonetSectionCurrentSESs,
+              sonetSectionCurrentSEFSs,
+              sonetSectionCurrentCVs,
+              sonetSectionIntervalESs,
+              sonetSectionIntervalSESs,
+              sonetSectionIntervalSEFSs,
+              sonetSectionIntervalCVs,
+              sonetSectionIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Section interfaces."
+    ::= { sonetGroups 10 }
+
+sonetLineStuff2    OBJECT-GROUP
+    OBJECTS { sonetLineCurrentStatus,
+              sonetLineCurrentESs,
+              sonetLineCurrentSESs,
+              sonetLineCurrentCVs,
+              sonetLineCurrentUASs,
+              sonetLineIntervalESs,
+              sonetLineIntervalSESs,
+              sonetLineIntervalCVs,
+              sonetLineIntervalUASs,
+              sonetLineIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Line interfaces."
+    ::= { sonetGroups 11 }
+
+sonetPathStuff2    OBJECT-GROUP
+    OBJECTS { sonetPathCurrentWidth,
+              sonetPathCurrentStatus,
+              sonetPathCurrentESs,
+              sonetPathCurrentSESs,
+              sonetPathCurrentCVs,
+              sonetPathCurrentUASs,
+              sonetPathIntervalESs,
+              sonetPathIntervalSESs,
+              sonetPathIntervalCVs,
+              sonetPathIntervalUASs,
+              sonetPathIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Path interfaces."
+    ::= { sonetGroups 12 }
+
+sonetVTStuff2    OBJECT-GROUP
+    OBJECTS { sonetVTCurrentWidth,
+              sonetVTCurrentStatus,
+              sonetVTCurrentESs,
+              sonetVTCurrentSESs,
+              sonetVTCurrentCVs,
+              sonetVTCurrentUASs,
+              sonetVTIntervalESs,
+              sonetVTIntervalSESs,
+              sonetVTIntervalCVs,
+              sonetVTIntervalUASs,
+              sonetVTIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH VT interfaces."
+    ::= { sonetGroups 13 }
+
+sonetFarEndLineStuff2    OBJECT-GROUP
+    OBJECTS { sonetFarEndLineCurrentESs,
+              sonetFarEndLineCurrentSESs,
+              sonetFarEndLineCurrentCVs,
+              sonetFarEndLineCurrentUASs,
+              sonetFarEndLineIntervalESs,
+              sonetFarEndLineIntervalSESs,
+              sonetFarEndLineIntervalCVs,
+              sonetFarEndLineIntervalUASs,
+              sonetFarEndLineIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Line interfaces,
+            and maintaining Line Far End information."
+    ::= { sonetGroups 14 }
+
+sonetFarEndPathStuff2    OBJECT-GROUP
+    OBJECTS { sonetFarEndPathCurrentESs,
+              sonetFarEndPathCurrentSESs,
+              sonetFarEndPathCurrentCVs,
+              sonetFarEndPathCurrentUASs,
+              sonetFarEndPathIntervalESs,
+              sonetFarEndPathIntervalSESs,
+              sonetFarEndPathIntervalCVs,
+              sonetFarEndPathIntervalUASs,
+              sonetFarEndPathIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH Path interfaces,
+            and maintaining Path Far End information."
+    ::= { sonetGroups 15 }
+
+sonetFarEndVTStuff2    OBJECT-GROUP
+    OBJECTS { sonetFarEndVTCurrentESs,
+              sonetFarEndVTCurrentSESs,
+              sonetFarEndVTCurrentCVs,
+              sonetFarEndVTCurrentUASs,
+              sonetFarEndVTIntervalESs,
+              sonetFarEndVTIntervalSESs,
+              sonetFarEndVTIntervalCVs,
+              sonetFarEndVTIntervalUASs,
+              sonetFarEndVTIntervalValidData }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information
+            specific to SONET/SDH VT interfaces,
+            and maintaining VT Far End information."
+    ::= { sonetGroups 16 }
+
+END
diff --git a/snmp_builder/mibs/SOURCE-ROUTING-MIB.mib b/snmp_builder/mibs/SOURCE-ROUTING-MIB.mib
new file mode 100644
index 0000000..b0776ed
--- /dev/null
+++ b/snmp_builder/mibs/SOURCE-ROUTING-MIB.mib
@@ -0,0 +1,450 @@
+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        Counter, Gauge
+                FROM RFC1155-SMI
+        dot1dBridge, dot1dSr
+                FROM BRIDGE-MIB
+        OBJECT-TYPE
+                FROM RFC-1212;
+
+-- groups in the SR MIB
+
+-- dot1dSr is imported from the Bridge MIB
+
+dot1dPortPair   OBJECT IDENTIFIER ::= { dot1dBridge 10 }
+
+-- the dot1dSr group
+
+-- this group is implemented by those bridges that
+-- support the source route bridging mode, including Source
+-- Routing and SRT bridges.
+
+dot1dSrPortTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dSrPortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table that contains information about every
+            port that is associated with this source route
+            bridge."
+    ::= { dot1dSr 1 }
+
+dot1dSrPortEntry OBJECT-TYPE
+    SYNTAX  Dot1dSrPortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of information for each port of a source
+            route bridge."
+    INDEX   { dot1dSrPort }
+    ::= { dot1dSrPortTable 1 }
+
+Dot1dSrPortEntry ::=
+    SEQUENCE {
+        dot1dSrPort
+            INTEGER,
+        dot1dSrPortHopCount
+            INTEGER,
+        dot1dSrPortLocalSegment
+            INTEGER,
+        dot1dSrPortBridgeNum
+            INTEGER,
+        dot1dSrPortTargetSegment
+            INTEGER,
+        dot1dSrPortLargestFrame
+            INTEGER,
+        dot1dSrPortSTESpanMode
+            INTEGER,
+        dot1dSrPortSpecInFrames
+            Counter,
+        dot1dSrPortSpecOutFrames
+            Counter,
+        dot1dSrPortApeInFrames
+            Counter,
+        dot1dSrPortApeOutFrames
+            Counter,
+        dot1dSrPortSteInFrames
+            Counter,
+        dot1dSrPortSteOutFrames
+            Counter,
+        dot1dSrPortSegmentMismatchDiscards
+            Counter,
+        dot1dSrPortDuplicateSegmentDiscards
+            Counter,
+        dot1dSrPortHopCountExceededDiscards
+            Counter,
+        dot1dSrPortDupLanIdOrTreeErrors
+            Counter,
+        dot1dSrPortLanIdMismatches
+            Counter
+    }
+
+dot1dSrPort OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the port for which this entry
+
+            contains Source Route management information."
+    ::= { dot1dSrPortEntry 1 }
+
+dot1dSrPortHopCount OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum number of routing descriptors allowed
+            in an All Paths or Spanning Tree Explorer frames."
+    ::= { dot1dSrPortEntry 2 }
+
+dot1dSrPortLocalSegment OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The segment number that uniquely identifies the
+            segment to which this port is connected. Current
+            source routing protocols limit this value to the
+            range: 0 through 4095. (The value 0 is used by
+            some management applications for special test
+            cases.) A value of 65535 signifies that no segment
+            number is assigned to this port."
+    ::= { dot1dSrPortEntry 3 }
+
+dot1dSrPortBridgeNum OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A bridge number uniquely identifies a bridge when
+            more than one bridge is used to span the same two
+            segments.  Current source routing protocols limit
+            this value to the range: 0 through 15. A value of
+            65535 signifies that no bridge number is assigned
+            to this bridge."
+    ::= { dot1dSrPortEntry 4 }
+
+dot1dSrPortTargetSegment OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The segment number that corresponds to the target
+            segment this port is considered to be connected to
+            by the bridge.  Current source routing protocols
+            limit this value to the range: 0 through 4095.
+
+            (The value 0 is used by some management
+            applications for special test cases.) A value of
+            65535 signifies that no target segment is assigned
+            to this port."
+    ::= { dot1dSrPortEntry 5 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest frame, but we can't because ifMtu is defined to be
+-- the size that the (inter-)network layer can use which can
+-- differ from the MAC layer (especially if several layers of
+-- encapsulation are used).
+
+dot1dSrPortLargestFrame OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum size of the INFO field (LLC and
+            above) that this port can send/receive.  It does
+            not include any MAC level (framing) octets.  The
+            value of this object is used by this bridge to
+            determine whether a modification of the
+            LargestFrame (LF, see [14]) field of the Routing
+            Control field of the Routing Information Field is
+            necessary.
+
+            64 valid values are defined by the IEEE 802.5M SRT
+            Addendum: 516, 635, 754, 873, 993, 1112, 1231,
+            1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
+            1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
+            4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
+            7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
+            10997, 11407, 12199, 12992, 13785, 14578, 15370,
+            16163, 16956, 17749, 20730, 23711, 26693, 29674,
+            32655, 35637, 38618, 41600, 44591, 47583, 50575,
+            53567, 56559, 59551, and 65535.
+
+            An illegal value will not be accepted by the
+            bridge."
+    ::= { dot1dSrPortEntry 6 }
+
+dot1dSrPortSTESpanMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                auto-span(1),
+                disabled(2),
+                forced(3)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Determines how this port behaves when presented
+            with a Spanning Tree Explorer frame.  The value
+            'disabled(2)' indicates that the port will not
+            accept or send Spanning Tree Explorer packets; any
+            STE packets received will be silently discarded.
+            The value 'forced(3)' indicates the port will
+            always accept and propagate Spanning Tree Explorer
+            frames.  This allows a manually configured
+            Spanning Tree for this class of packet to be
+            configured.  Note that unlike transparent
+            bridging, this is not catastrophic to the network
+            if there are loops.  The value 'auto-span(1)' can
+            only be returned by a bridge that both implements
+            the Spanning Tree Protocol and has use of the
+            protocol enabled on this port. The behavior of the
+            port for Spanning Tree Explorer frames is
+            determined by the state of dot1dStpPortState.  If
+            the port is in the 'forwarding' state, the frame
+            will be accepted or propagated.  Otherwise, it
+            will be silently discarded."
+    ::= { dot1dSrPortEntry 7 }
+
+dot1dSrPortSpecInFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of Specifically Routed frames, also
+            referred to as Source Routed Frames, that have
+            been received from this port's segment."
+    ::= { dot1dSrPortEntry 8 }
+
+dot1dSrPortSpecOutFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of Specifically Routed frames, also
+            referred to as Source Routed Frames, that this
+            port has transmitted on its segment."
+    ::= { dot1dSrPortEntry 9 }
+
+dot1dSrPortApeInFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of All Paths Explorer frames, also
+            referred to as All Routes Explorer frames, that
+            have been received by this port from its segment."
+    ::= { dot1dSrPortEntry 10 }
+
+dot1dSrPortApeOutFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of all Paths Explorer Frames, also
+            referred to as All Routes Explorer frames, that
+            have been transmitted by this port on its
+            segment."
+    ::= { dot1dSrPortEntry 11 }
+
+dot1dSrPortSteInFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of spanning tree explorer frames that
+            have been received by this port from its segment."
+    ::= { dot1dSrPortEntry 12 }
+
+dot1dSrPortSteOutFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of spanning tree explorer frames that
+            have been transmitted by this port on its
+            segment."
+    ::= { dot1dSrPortEntry 13 }
+
+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of explorer frames that have been
+            discarded by this port because the routing
+            descriptor field contained an invalid adjacent
+            segment value."
+    ::= { dot1dSrPortEntry 14 }
+
+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of frames that have been discarded by
+            this port because the routing descriptor field
+            contained a duplicate segment identifier."
+    ::= { dot1dSrPortEntry 15 }
+
+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of explorer frames that have been
+            discarded by this port because the Routing
+            Information Field has exceeded the maximum route
+            descriptor length."
+    ::= { dot1dSrPortEntry 16 }
+
+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of duplicate LAN IDs or Tree errors.
+            This helps in detection of problems in networks
+            containing older IBM Source Routing Bridges."
+    ::= { dot1dSrPortEntry 17 }
+
+dot1dSrPortLanIdMismatches OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ARE and STE frames that were
+            discarded because the last LAN ID in the routing
+            information field did not equal the LAN-in ID.
+            This error can occur in implementations which do
+            only a LAN-in ID and Bridge Number check instead
+            of a LAN-in ID, Bridge Number, and LAN-out ID
+            check before they forward broadcast frames."
+    ::= { dot1dSrPortEntry 18 }
+
+-- scalar object in dot1dSr
+
+dot1dSrBridgeLfMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                mode3(1),
+                mode6(2)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates whether the bridge operates using older
+            3 bit length negotiation fields or the newer 6 bit
+            length field in its RIF."
+    ::= { dot1dSr 2 }
+
+-- The Port-Pair Database
+
+-- Implementation of this group is optional.
+
+-- This group is implemented by those bridges that support
+-- the direct multiport model of the source route bridging
+-- mode as defined in the IEEE 802.5 SRT Addendum to
+-- 802.1d.
+
+-- Bridges implementing this group may report 65535 for
+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
+-- indicating that those objects are not applicable.
+
+dot1dPortPairTableSize OBJECT-TYPE
+    SYNTAX  Gauge
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of entries in the Bridge Port
+            Pair Database."
+    ::= { dot1dPortPair 1 }
+
+-- the Bridge Port-Pair table
+
+-- this table represents port pairs within a bridge forming
+-- a unique bridge path, as defined in the IEEE 802.5M SRT
+-- Addendum.
+
+dot1dPortPairTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dPortPairEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table that contains information about every
+
+            port pair database entity associated with this
+            source routing bridge."
+    ::= { dot1dPortPair 2 }
+
+dot1dPortPairEntry OBJECT-TYPE
+    SYNTAX  Dot1dPortPairEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of information for each port pair entity
+            of a bridge."
+    INDEX   { dot1dPortPairLowPort, dot1dPortPairHighPort }
+    ::= { dot1dPortPairTable 1 }
+
+Dot1dPortPairEntry ::=
+    SEQUENCE {
+        dot1dPortPairLowPort
+            INTEGER,
+        dot1dPortPairHighPort
+            INTEGER,
+        dot1dPortPairBridgeNum
+            INTEGER,
+        dot1dPortPairBridgeState
+            INTEGER
+    }
+
+dot1dPortPairLowPort OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the lower numbered port for
+            which this entry contains port pair database
+            information."
+    ::= { dot1dPortPairEntry 1 }
+
+dot1dPortPairHighPort OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the higher numbered port for
+            which this entry contains port pair database
+            information."
+    ::= { dot1dPortPairEntry 2 }
+
+dot1dPortPairBridgeNum OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "A bridge number that uniquely identifies the path
+            provided by this source routing bridge between the
+            segments connected to dot1dPortPairLowPort and
+            dot1dPortPairHighPort.  The purpose of bridge
+            number is to disambiguate between multiple paths
+            connecting the same two LANs."
+    ::= { dot1dPortPairEntry 3 }
+
+dot1dPortPairBridgeState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2),
+                invalid(3)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The state of dot1dPortPairBridgeNum.  Writing
+            'invalid(3)' to this object removes the
+            corresponding entry."
+    ::= { dot1dPortPairEntry 4 }
+
+END
diff --git a/snmp_builder/mibs/SSPM-MIB.mib b/snmp_builder/mibs/SSPM-MIB.mib
new file mode 100644
index 0000000..50e8527
--- /dev/null
+++ b/snmp_builder/mibs/SSPM-MIB.mib
@@ -0,0 +1,1029 @@
+SSPM-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+
+       MODULE-IDENTITY, OBJECT-TYPE,
+       Counter32, Integer32, Unsigned32
+                                   FROM SNMPv2-SMI  --[RFC2578]
+
+       TEXTUAL-CONVENTION, StorageType,
+       TruthValue, RowStatus
+                                   FROM SNMPv2-TC  --[RFC2579]
+
+       MODULE-COMPLIANCE, OBJECT-GROUP
+                                   FROM SNMPv2-CONF --[RFC2578,
+                                                    -- RFC2579,
+                                                    -- RFC2580]
+       OwnerString, rmon
+                                   FROM RMON-MIB  --[RFC2819]
+
+       InetAddressType, InetAddress
+                                   FROM INET-ADDRESS-MIB  --[RFC3291]
+
+       InterfaceIndexOrZero
+                                   FROM IF-MIB  --[RFC2863]
+
+       AppLocalIndex
+                                   FROM APM-MIB  --[RFC3729]
+
+       Utf8String
+                                   FROM SYSAPPL-MIB;  --[RFC2287]
+
+   sspmMIB MODULE-IDENTITY
+       LAST-UPDATED "200507280000Z"  -- July 28, 2005
+       ORGANIZATION "IETF RMON MIB working group"
+       CONTACT-INFO
+           "        Carl W. Kalbfleisch
+                    Consultant
+
+            E-mail: ietf@kalbfleisch.us
+
+            Working group mailing list: rmonmib@ietf.org
+            To subscribe send email to rmonmib-request@ietf.org"
+       DESCRIPTION
+           "This SSPM MIB module is applicable to probes
+            implementing Synthetic Source for Performance
+            Monitoring functions.
+
+            Copyright (C) The Internet Society (2005).  This version
+            of this MIB module is part of RFC 4149; see the RFC
+            itself for full legal notices."
+
+          -- revision history
+
+          REVISION    "200507280000Z"   -- July 28, 2005
+          DESCRIPTION
+              "The original version of this MIB module,
+              was published as RFC4149."
+          ::= { rmon 28 }
+
+--
+-- Object Identifier Assignments
+--
+sspmMIBObjects       OBJECT IDENTIFIER ::= { sspmMIB 1 }
+sspmMIBNotifications OBJECT IDENTIFIER ::= { sspmMIB 2 }
+sspmMIBConformance   OBJECT IDENTIFIER ::= { sspmMIB 3 }
+
+--
+-- Textual Conventions
+--
+
+SspmMicroSeconds ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS current
+    DESCRIPTION
+        "A unit of time with resolution of MicroSeconds."
+    SYNTAX Unsigned32
+
+SspmClockSource ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS current
+    DESCRIPTION
+        "An indication of the source of the clock as defined by the
+         NTP specification RFC1305 [RFC1305] definition of stratum:
+
+         Stratum (sys.stratum, peer.stratum, pkt.stratum): This is
+         an integer indicating the stratum of the local clock,
+         with values defined as follows:
+
+         0      unspecified
+
+         1      primary reference (e.g., calibrated atomic clock,
+                radio clock)
+
+         2-255  secondary reference (via NTP)."
+    REFERENCE
+        "RFC1305."
+    SYNTAX Integer32 (0..255)
+
+SspmClockMaxSkew ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS current
+    -- UNITS "Seconds"
+    DESCRIPTION
+        "An indication of the accuracy of the clock as defined by
+         RFC1305.  This variable indicates the maximum offset
+         error due to skew of the local clock over the
+         time interval 86400 seconds, in seconds."
+    REFERENCE
+        "RFC1305."
+    SYNTAX Integer32 (1..65535)
+
+--
+-- sspmGeneral
+--
+sspmGeneral           OBJECT IDENTIFIER ::= { sspmMIBObjects 1 }
+sspmGeneralClockResolution OBJECT-TYPE
+    SYNTAX      SspmMicroSeconds
+    MAX-ACCESS  read-only
+    STATUS      current
+    -- UNITS       Microseconds
+    DESCRIPTION
+        "A read-only variable indicating the resolution
+      of the measurements possible by this device."
+    ::= { sspmGeneral 1 }
+
+sspmGeneralClockMaxSkew OBJECT-TYPE
+    SYNTAX SspmClockMaxSkew
+    MAX-ACCESS read-only
+    STATUS current
+    -- UNITS Seconds
+    DESCRIPTION
+        "A read-only variable indicating the maximum offset
+         error due to skew of the local clock over the
+         time interval 86400 seconds, in seconds."
+    ::= { sspmGeneral 2 }
+
+sspmGeneralClockSource OBJECT-TYPE
+    SYNTAX SspmClockSource
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A read-only variable indicating the source of the clock.
+         This is provided to allow a user to determine how accurate
+         the timing mechanism is compared with other devices.  This
+         is needed for the coordination of time values
+         between probes for one-way measurements."
+    ::= { sspmGeneral 3 }
+
+sspmGeneralMinFrequency OBJECT-TYPE
+    SYNTAX     SspmMicroSeconds
+    MAX-ACCESS read-only
+    -- units   MicroSeconds
+    STATUS     current
+    DESCRIPTION
+         "A read-only variable that indicates the devices'
+          capability for the minimum supported
+          sspmSourceFrequency.  If sspmSourceFrequency is
+          set to a value lower than the value reported
+          by this attribute, then the set of sspmSourceFrequency
+          will fail with an inconsistent value error."
+    ::= { sspmGeneral 4 }
+
+--
+-- sspmCapabilities
+--
+
+-- Describes the capabilities of the SSPM device.
+--
+sspmCapabilitiesTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF SspmCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of SSPM capabilities."
+    ::= { sspmGeneral 5 }
+
+sspmCapabilitiesEntry OBJECT-TYPE
+    SYNTAX      SspmCapabilitiesEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Details about a particular SSPM capability."
+    INDEX { sspmCapabilitiesInstance }
+    ::= { sspmCapabilitiesTable 1 }
+
+SspmCapabilitiesEntry ::= SEQUENCE {
+    sspmCapabilitiesInstance AppLocalIndex
+    }
+
+sspmCapabilitiesInstance OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates whether SSPM configuration of the corresponding
+         AppLocalIndex is supported by this device.  Generally,
+         entries in this table are only made by the device when the
+         configuration of the measurement is available."
+     ::= { sspmCapabilitiesEntry 1 }
+
+--
+-- sspmSource
+--
+-- Contains the details of the source of the
+-- Synthetic Sources for Performance Monitoring algorithms.
+-- This information is split into two tables.  The first defines
+-- profiles that can be applied to specific sources in the
+-- control table.
+--
+sspmSource           OBJECT IDENTIFIER ::= { sspmMIBObjects 2 }
+
+--
+-- sspmSourceProfileTable
+-- Defines template profiles for measurements.
+
+--
+sspmSourceProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF SspmSourceProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of SSPM Source Profiles configured."
+    ::= { sspmSource 1 }
+
+sspmSourceProfileEntry OBJECT-TYPE
+    SYNTAX      SspmSourceProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Details about a particular SSPM Source Profile
+         configuration.  Entries must exist in this table
+         in order to be referenced by rows in the
+         sspmSourceControlTable."
+    INDEX { sspmSourceProfileInstance }
+    ::= { sspmSourceProfileTable 1 }
+
+SspmSourceProfileEntry ::= SEQUENCE {
+    sspmSourceProfileInstance           Unsigned32,
+    sspmSourceProfileType               AppLocalIndex,
+    sspmSourceProfilePacketSize         Unsigned32,
+    sspmSourceProfilePacketFillType     INTEGER,
+    sspmSourceProfilePacketFillValue    OCTET STRING,
+    sspmSourceProfileTOS                Integer32,
+    sspmSourceProfileFlowLabel          Integer32,
+    sspmSourceProfileLooseSrcRteFill    OCTET STRING,
+    sspmSourceProfileLooseSrcRteLen     Integer32,
+    sspmSourceProfileTTL                Integer32,
+    sspmSourceProfileNoFrag             TruthValue,
+    sspmSourceProfile8021Tagging        Integer32,
+    sspmSourceProfileUsername           Utf8String,
+    sspmSourceProfilePassword           Utf8String,
+    sspmSourceProfileParameter          OCTET STRING,
+    sspmSourceProfileOwner              OwnerString,
+    sspmSourceProfileStorageType        StorageType,
+    sspmSourceProfileStatus             RowStatus
+}
+
+sspmSourceProfileInstance OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary index."
+     ::= { sspmSourceProfileEntry 1 }
+
+sspmSourceProfileType OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The AppLocalIndex value that uniquely identifies the
+         measurement per the APM-MIB.  In order to create a row
+         in this table, there must be a corresponding row in the
+         sspmCapabilitiesTable.
+
+         When attempting to set this object, if no
+         corresponding row exists in the sspmCapabilitiesTable,
+         then the agent should return a 'badValue' error."
+    ::= { sspmSourceProfileEntry 2}
+
+sspmSourceProfilePacketSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The size of packet to be transmitted in bytes.  The
+         size accounts for all data within the IPv4 or IPv6
+         payloads, excluding the IP headers, IP header options
+         and link-level protocol headers.
+
+         If the size is set smaller than the minimum allowed
+         packet size or greater than the maximum allowed
+         packet size, then the set should fail, and the agent
+         should return a 'badValue' error."
+    ::= { sspmSourceProfileEntry 3 }
+
+sspmSourceProfilePacketFillType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                        random (1),
+                        pattern (2),
+                        url(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates how the packet is filled.
+
+         'random' indicates that the packet contains random
+         data patterns.  This is probe and implementation
+         dependent.
+
+         'pattern' indicates that the pattern defined in the
+         sspmSourceProfilePacketFillValue attribute is used to
+         fill the packet.
+
+         'url' indicates that the value of
+         sspmSourceProfilePacketFillValue should
+         contain a URL.  The contents of the document
+         at that URL are retrieved when sspmSourceStatus becomes
+         active and utilized in the packet.  If the attempt to
+         access that URL fails, then the row status is set to
+         'notReady', and the set should fail with
+         'inconsistentValue'.  This value must contain a
+         dereferencable URL of the type 'http:', 'https:', or
+         'ftp:' only."
+    ::= { sspmSourceProfileEntry 4 }
+
+sspmSourceProfilePacketFillValue OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The string value with which to fill the packet.  If
+         sspmSourceProfilePacketFillType is set to 'pattern',
+         then this pattern is repeated until the packet is
+         sspmSourcePacketSize in bytes.  Note that if the
+         length of the octet string specified for this
+         value does not divide evenly into the packet
+         size, then an incomplete last copy of this data
+         may be copied into the packet.  If the value of
+         sspmSourceProfilePacketFillType is set to 'random', then
+         this attribute is unused.  If the value of the
+         sspmSourceProfilePacketFillType is set to 'url', then
+         the URL specified in this attribute is retrieved
+         and used by the probe.  In the case of a URL, this value
+         must contain a dereferencable URL of the type
+         'http:', 'https:', or 'ftp:' only."
+    ::= { sspmSourceProfileEntry 5 }
+
+sspmSourceProfileTOS OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Represents the TOS field in the IP packet header.  The
+        value of this object defaults to zero if not set."
+    DEFVAL { 0 }
+    ::= { sspmSourceProfileEntry 6 }
+
+sspmSourceProfileFlowLabel OBJECT-TYPE
+    SYNTAX      Integer32 (0..1048575) -- 20-bit range (0 to 0xfffff)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object is used to specify the Flow Label in a IPv6
+         packet (RFC 2460) to force special handling by the IPv6
+         routers; e.g., non-default quality-of-service handling.
+
+         This object is meaningful only when the object
+         sspmSourceDestAddressType is IPv6(2).
+         The value of this object defaults to zero if not set."
+    DEFVAL { 0 }
+    ::= { sspmSourceProfileEntry 7 }
+
+sspmSourceProfileLooseSrcRteFill OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..240))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "In the event that the test should run over a
+         specific route, the intent is to force the route using the
+         Loose Source Route option in IPv4 [RFC791] and
+         IPv6 [RFC2460].  This object contains a
+         series of IP addresses along the path that would be
+         put into the loose source route option in the IP header.
+
+         The IPv4 addresses are to be listed as 32-bit
+         address values, and the IPv6 addresses are to be
+         listed as a string of 128-bit addresses.  The
+         maximum length allowed within the IPv4 source route
+         option is 63 addresses.  To simply account for
+         IPv6 addresses as well, the maximum length of the
+         octet string is 240.  This allows up to 60
+         IPv4 addresses or up to 15 IPv6 addresses in the
+         string."
+    ::= { sspmSourceProfileEntry 8 }
+
+sspmSourceProfileLooseSrcRteLen OBJECT-TYPE
+    SYNTAX      Integer32(0..240)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "In the event that the test should run over a
+         specific route, the intent is to force the route.
+         This attribute specifies the length of data to
+         be copied from the sspmSourceProfileLooseSrcRteFill
+         into the route data fields of the loose source route
+
+         options in the IPv4 or IPv6 headers."
+    ::= { sspmSourceProfileEntry 9 }
+
+sspmSourceProfileTTL OBJECT-TYPE
+    SYNTAX      Integer32(1..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "If non-zero, this specifies the value to place into
+         the TTL field on transmission."
+    ::= { sspmSourceProfileEntry 10 }
+
+sspmSourceProfileNoFrag OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When true, the 'Don't Fragment Bit' should be set
+         on the packet header."
+    ::= { sspmSourceProfileEntry 11 }
+
+sspmSourceProfile8021Tagging OBJECT-TYPE
+    SYNTAX      Integer32 (-1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "IEEE 802.1Q tagging used in IEEE 802.1D bridged
+        environments.
+
+        A value of -1 indicates that the packets are untagged.
+
+        A value of 0 to 65535 is the value of the tag to be
+        inserted in the tagged packets.
+
+        Note that according to IEEE 802.1Q, VLAN-ID tags with
+        a value of 4095 shall not be transmitted on the wire.
+        As the VLAN-ID is encoded in the 12 least significant
+        bits on the tag, values that translate in a binary
+        representation of all 1's in the last 12 bits
+        SHALL NOT be configured.  In this case, the set should
+        fail, and return an error-status of 'inconsistentValue'."
+    ::= { sspmSourceProfileEntry 12 }
+
+sspmSourceProfileUsername OBJECT-TYPE
+    SYNTAX      Utf8String
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An optional username used by the application protocol."
+    ::= { sspmSourceProfileEntry 13 }
+
+sspmSourceProfilePassword OBJECT-TYPE
+    SYNTAX      Utf8String
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An optional password used by the application protocol."
+    ::= { sspmSourceProfileEntry 14 }
+
+sspmSourceProfileParameter OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..65535))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "An optional parameter used by the application protocol.
+         For DNS, this would be the hostname or IP.  For HTTP,
+         this would be the URL.  For nntp, this would be the
+         news group.  For TCP, this would be the port number.
+         For SMTP, this would be the recipient (and could
+         assume the message is predefined)."
+    ::= { sspmSourceProfileEntry 15 }
+
+sspmSourceProfileOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Name of the management station/application that
+        set up the profile."
+    ::= { sspmSourceProfileEntry 16 }
+
+sspmSourceProfileStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this sspmSourceProfileEntry.  If the
+        value of this object is 'permanent', no objects in this row
+        need to be writable."
+    ::= { sspmSourceProfileEntry 17 }
+
+sspmSourceProfileStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Status of this profile.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        Once this object is set to active(1), no objects in the
+        sspmSourceProfileTable can be changed."
+    ::= { sspmSourceProfileEntry 18 }
+
+--
+-- sspmSourceControlTable
+-- Defines specific measurement instances based on template
+-- profiles in the sspmSourceProfileTable which must be
+-- pre-configured.
+--
+
+sspmSourceControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF SspmSourceControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of SSPM measurements configured."
+    ::= { sspmSource 2 }
+
+sspmSourceControlEntry OBJECT-TYPE
+    SYNTAX      SspmSourceControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Details about a particular SSPM configuration."
+    INDEX { sspmSourceControlInstance }
+    ::= { sspmSourceControlTable 1 }
+
+SspmSourceControlEntry ::= SEQUENCE {
+    sspmSourceControlInstance          Unsigned32,
+    sspmSourceControlProfile           Integer32,
+    sspmSourceControlSrc               InterfaceIndexOrZero,
+    sspmSourceControlDestAddrType      InetAddressType,
+    sspmSourceControlDestAddr          InetAddress,
+    sspmSourceControlEnabled           TruthValue,
+    sspmSourceControlTimeOut           SspmMicroSeconds,
+    sspmSourceControlSamplingDist      INTEGER,
+    sspmSourceControlFrequency         SspmMicroSeconds,
+    sspmSourceControlFirstSeqNum       Unsigned32,
+    sspmSourceControlLastSeqNum        Unsigned32,
+    sspmSourceControlOwner             OwnerString,
+    sspmSourceControlStorageType       StorageType,
+    sspmSourceControlStatus            RowStatus
+
+}
+
+sspmSourceControlInstance OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary index."
+     ::= { sspmSourceControlEntry 1 }
+
+sspmSourceControlProfile OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "A pointer to the profile (sspmSourceProfileEntry) that
+         this control entry uses to define the test being
+         performed."
+     ::= { sspmSourceControlEntry 2 }
+
+sspmSourceControlSrc OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The ifIndex where the packet should originate from the
+         probe (if it matters).  A value of zero indicates that
+         it does not matter and that the device decides."
+    ::= { sspmSourceControlEntry 3 }
+
+sspmSourceControlDestAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address by which the destination
+         is accessed."
+    ::= { sspmSourceControlEntry 4 }
+
+sspmSourceControlDestAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Internet address for the destination.  The formatting
+        of this object is controlled by the
+        sspmSourceControlDestAddrType object above.
+
+        When this object contains a DNS name, then the name is
+        resolved to an address each time measurement is to be made.
+        Further, the agent should not cache this address,
+        but instead should perform the resolution prior to each
+        measurement."
+    ::= { sspmSourceControlEntry 5 }
+
+sspmSourceControlEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When set to 'true', this test is enabled.  When set to
+         'false', it is disabled."
+    ::= { sspmSourceControlEntry 6 }
+
+sspmSourceControlTimeOut OBJECT-TYPE
+    SYNTAX      SspmMicroSeconds
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Timeout value for the measurement response.  If no
+         response is received in the time specified, then
+         the test fails."
+    ::= { sspmSourceControlEntry 7 }
+
+sspmSourceControlSamplingDist OBJECT-TYPE
+    SYNTAX      INTEGER {
+                         deterministic(1),
+                         poisson(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When this attribute is set to 'deterministic', then
+         packets are generated at with a fixed inter-packet
+         injection time specified by sspmSourceFrequency.
+
+         When this attribute is set to 'Poisson', then packets
+         are generated with inter-packet injection times sampled
+         from an exponential distribution with the single
+         distributional parameter determined by the inverse
+         frequency)."
+    ::= { sspmSourceControlEntry 8 }
+
+sspmSourceControlFrequency OBJECT-TYPE
+    SYNTAX      SspmMicroSeconds
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The inverse of this value is the rate at which packets
+         are generated.  Refer to sspmSourceSamplingDistribution.
+         If the value set is less than the value of
+         sspmGeneralMinFrequency, then the set will fail with an
+         error-status of 'inconsistentValue'."
+    ::= { sspmSourceControlEntry 9 }
+
+sspmSourceControlFirstSeqNum OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The first sequence number of packets to be transmitted."
+    ::= { sspmSourceControlEntry 10 }
+
+sspmSourceControlLastSeqNum OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last sequence number transmitted.  This value is updated
+         by the agent after packet generation."
+    ::= { sspmSourceControlEntry 11 }
+
+sspmSourceControlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Name of the management station/application that set
+        up the test."
+    ::= { sspmSourceControlEntry 12 }
+
+sspmSourceControlStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this sspmSourceControlEntry.  If the
+        value of this object is 'permanent', no objects in this row
+        need to be writable."
+    ::= { sspmSourceControlEntry 13 }
+
+sspmSourceControlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Status of this source control entry.
+
+        An entry may not exist in the active state unless all
+        objects in the entry have an appropriate value.
+
+        When this attribute has the value of
+        'active', none of the read-write or read-create attributes
+        in this table may be modified, with the exception of
+        sspmSourceControlEnabled."
+    ::= { sspmSourceControlEntry 14 }
+
+--
+-- sspmSinkTable
+--
+-- Contains attributes for configuration of Synthetic
+-- Sources for Performance Monitoring sinks, i.e.,
+-- sinks for receipt of one-way delay measurements.
+--
+sspmSink           OBJECT IDENTIFIER ::= { sspmMIBObjects 5 }
+
+sspmSinkTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF SspmSinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table configuring the sink for measurements."
+    ::= { sspmSink 1 }
+
+sspmSinkEntry OBJECT-TYPE
+    SYNTAX      SspmSinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The details of a particular sink entry.  If the measurement
+         is a round-trip type, then the sink entry will be on the
+         same probe as the corresponding sspmSourceEntry.  If the
+         measurement is a one-way, type then the sink entry will be
+         on a different probe."
+    INDEX { sspmSinkInstance }
+    ::= { sspmSinkTable 1}
+
+SspmSinkEntry ::= SEQUENCE {
+    sspmSinkInstance                       Unsigned32,
+    sspmSinkType                           AppLocalIndex,
+    sspmSinkSourceAddressType              InetAddressType,
+    sspmSinkSourceAddress                  InetAddress,
+    sspmSinkExpectedRate                   SspmMicroSeconds,
+    sspmSinkEnable                         TruthValue,
+    sspmSinkExpectedFirstSequenceNum       Unsigned32,
+    sspmSinkLastSequenceNumber             Unsigned32,
+    sspmSinkLastSequenceInvalid            Counter32,
+    sspmSinkStorageType                    StorageType,
+    sspmSinkStatus                         RowStatus
+}
+
+sspmSinkInstance OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index.  When the measurement is for a round-trip
+         measurement, then this table entry is on the same probe as
+         the corresponding sspmSourceEntry, and the value of this
+         attribute should correspond to the value of
+         sspmSourceInstance.  Management applications configuring
+         sinks for one-way measurements could define some
+         scheme whereby the sspmSinkInstance is unique across
+         all probes.  Note that the unique key to this entry is
+         also constructed with sspmSinkType,
+         sspmSinkSourceAddressType, and sspmSinkSourceAddress.
+         To make the implementation simpler, those other
+         attributes are not included in the index but uniqueness
+         is still needed to receive all the packets."
+     ::= { sspmSinkEntry 1 }
+
+sspmSinkType OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The AppLocalIndex value that uniquely identifies the
+         measurement per the APM-MIB.  In order to create a row
+         in this table, there must be a corresponding row in the
+         sspmCapabilitiesTable.  If there is no corresponding
+         row in the sspmCapabilitiestable, then the agent will
+         return an error-status of 'inconsistentValue'."
+    ::= { sspmSinkEntry 2}
+
+sspmSinkSourceAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of Internet address of the source."
+    ::= { sspmSinkEntry 3 }
+
+sspmSinkSourceAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The Internet address of the source.  The formatting
+        of this object is controlled by the sspmSinkSourceAddressType
+        object above.
+
+        This object should be set only to a valid device address
+        that has been administratively configured into the
+        device.  If a set attempts to set this object to an
+        address that does not belong (i.e., is not administratively
+        configured into the device), the set should fail, and the
+        agent should return a error-status of 'inconsistentValue'."
+    ::= { sspmSinkEntry 4 }
+
+sspmSinkExpectedRate OBJECT-TYPE
+    SYNTAX      SspmMicroSeconds
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The expected rate at which packets will arrive."
+    ::= { sspmSinkEntry 5 }
+
+sspmSinkEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Indicates if the sink is enabled or not."
+    ::= { sspmSinkEntry 6 }
+
+sspmSinkExpectedFirstSequenceNum OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The expected first sequence number of packets.
+         This is used by the sink to determine if packets
+         were lost at the initiation of the test."
+    ::= { sspmSinkEntry 7 }
+
+sspmSinkLastSequenceNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last sequence number received."
+    ::= { sspmSinkEntry 8 }
+
+sspmSinkLastSequenceInvalid OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of packets that arrived whose
+         sequence number was not one plus the value of
+         sspmSinkLastSequenceNumber."
+    ::= { sspmSinkEntry 9 }
+
+sspmSinkStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this sspmSinkEntry.  If the value
+        of this object is 'permanent', no objects in this row
+        need to be writable."
+    ::= { sspmSinkEntry 10 }
+
+sspmSinkStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+         "Status of this conceptual row.
+         An entry may not exist in the active state unless all
+         objects in the entry have an appropriate value.
+
+         Once this object is set to active(1), no objects with
+         MAX-ACCESS of read-create in the sspmSinkTable can
+         be changed."
+    ::= { sspmSinkEntry 11 }
+
+--
+-- Notifications
+--
+
+--
+-- Conformance information
+--
+sspmCompliances OBJECT IDENTIFIER ::= { sspmMIBConformance 1 }
+sspmGroups      OBJECT IDENTIFIER ::= { sspmMIBConformance 2 }
+
+-- Compliance Statements
+sspmGeneralCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "A general compliance that allows all things to be optional."
+  MODULE -- this module
+
+  MANDATORY-GROUPS { sspmGeneralGroup }
+
+  GROUP sspmSourceGroup
+  DESCRIPTION
+    "The SSPM Source Group is optional."
+
+  GROUP sspmSinkGroup
+  DESCRIPTION
+    "The SSPM Sink Group is optional."
+
+  GROUP sspmUserPassGroup
+  DESCRIPTION
+    "The SSPM User Pass Group is optional."
+  ::= { sspmCompliances 1 }
+
+--
+-- SSPM Source Compliance
+--
+sspmSourceFullCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "A source compliance.  Use this compliance when implementing
+     a traffic-source-only device.  This is useful for implementing
+     devices that probe other devices for intrusive application
+     monitoring.  It is also useful for implementing the source
+     of one-way tests used with a sink-only device."
+  MODULE -- this module
+
+  MANDATORY-GROUPS { sspmGeneralGroup, sspmSourceGroup }
+
+  GROUP sspmUserPassGroup
+  DESCRIPTION
+    "The SSPM User Pass Group is optional."
+  ::= { sspmCompliances 2 }
+
+--
+-- SSPM Sink Compliance
+--
+sspmSinkFullCompliance MODULE-COMPLIANCE
+  STATUS current
+  DESCRIPTION
+    "A sink-only compliance.  Use this compliance when implementing a
+     sink-only device.  This is useful for devices to receive one-way
+     measurements."
+  MODULE -- this module
+
+  MANDATORY-GROUPS { sspmGeneralGroup, sspmSinkGroup }
+  ::= { sspmCompliances 3 }
+
+--
+-- Groups
+--
+sspmGeneralGroup OBJECT-GROUP
+    OBJECTS {
+    sspmGeneralClockResolution,
+    sspmGeneralClockMaxSkew,
+    sspmGeneralClockSource,
+    sspmGeneralMinFrequency,
+    sspmCapabilitiesInstance
+    }
+    STATUS      current
+    DESCRIPTION
+        "The objects in the SSPM General Group."
+    ::= { sspmGroups 1 }
+
+sspmSourceGroup OBJECT-GROUP
+    OBJECTS {
+    sspmSourceProfileType,
+    sspmSourceProfilePacketSize,
+    sspmSourceProfilePacketFillType,
+    sspmSourceProfilePacketFillValue,
+    sspmSourceProfileTOS,
+    sspmSourceProfileFlowLabel,
+    sspmSourceProfileLooseSrcRteFill,
+    sspmSourceProfileLooseSrcRteLen,
+    sspmSourceProfileTTL,
+    sspmSourceProfileNoFrag,
+    sspmSourceProfile8021Tagging,
+    sspmSourceProfileUsername,
+    sspmSourceProfilePassword,
+    sspmSourceProfileParameter,
+    sspmSourceProfileOwner,
+    sspmSourceProfileStorageType,
+    sspmSourceProfileStatus,
+    sspmSourceControlProfile,
+    sspmSourceControlSrc,
+    sspmSourceControlDestAddrType,
+    sspmSourceControlDestAddr,
+    sspmSourceControlEnabled,
+    sspmSourceControlTimeOut,
+    sspmSourceControlSamplingDist,
+    sspmSourceControlFrequency,
+    sspmSourceControlFirstSeqNum,
+    sspmSourceControlLastSeqNum,
+    sspmSourceControlOwner,
+    sspmSourceControlStorageType,
+    sspmSourceControlStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "The objects in the SSPM Source Group."
+    ::= { sspmGroups 2 }
+
+sspmUserPassGroup OBJECT-GROUP
+    OBJECTS {
+    sspmSourceProfileUsername,
+    sspmSourceProfilePassword
+    }
+    STATUS      current
+    DESCRIPTION
+        "The objects in the SSPM Username and password group."
+    ::= { sspmGroups 3 }
+
+sspmSinkGroup OBJECT-GROUP
+    OBJECTS {
+    sspmSinkType,
+    sspmSinkSourceAddressType,
+    sspmSinkSourceAddress,
+    sspmSinkExpectedRate,
+    sspmSinkEnable,
+    sspmSinkExpectedFirstSequenceNum,
+    sspmSinkLastSequenceNumber,
+    sspmSinkLastSequenceInvalid,
+    sspmSinkStorageType,
+    sspmSinkStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "The objects in the SSPM Sink Group."
+    ::= { sspmGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/SYSAPPL-MIB.mib b/snmp_builder/mibs/SYSAPPL-MIB.mib
new file mode 100644
index 0000000..dbfa9e2
--- /dev/null
+++ b/snmp_builder/mibs/SYSAPPL-MIB.mib
@@ -0,0 +1,1539 @@
+  SYSAPPL-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE,
+      Unsigned32, TimeTicks, Counter32, Gauge32
+          FROM SNMPv2-SMI
+      DateAndTime, TEXTUAL-CONVENTION
+          FROM SNMPv2-TC
+      MODULE-COMPLIANCE, OBJECT-GROUP
+          FROM SNMPv2-CONF
+      mib-2 FROM SNMPv2-SMI;
+
+  -- System Application MIB
+
+  sysApplMIB MODULE-IDENTITY
+      LAST-UPDATED "9710200000Z"
+      ORGANIZATION "IETF Applications MIB Working Group"
+      CONTACT-INFO
+            "Cheryl Krupczak (Editor, WG Advisor)
+             Postal: Empire Technologies, Inc.
+             541 Tenth Street NW
+             Suite 169
+             Atlanta, GA 30318
+             USA
+             Phone: (770) 384-0184
+             Email: cheryl@empiretech.com
+
+             Jon Saperia (WG Chair)
+             Postal:  BGS Systems, Inc.
+             One First Avenue
+             Waltham, MA 02254-9111
+             USA
+             Phone: (617) 891-0000
+             Email: saperia@networks.bgs.com"
+      DESCRIPTION
+          "The MIB module defines management objects that model
+          applications as collections of executables and files
+          installed and executing on a host system.  The MIB
+          presents a system-level view of applications; i.e.,
+          objects in this MIB are limited to those attributes
+          that can typically be obtained from the system itself
+          without adding special instrumentation to the applications."
+      ::= { mib-2 54  }
+
+  sysApplOBJ               OBJECT IDENTIFIER ::= { sysApplMIB 1 }
+  sysApplInstalled         OBJECT IDENTIFIER ::= { sysApplOBJ 1 }
+  sysApplRun               OBJECT IDENTIFIER ::= { sysApplOBJ 2 }
+  sysApplMap               OBJECT IDENTIFIER ::= { sysApplOBJ 3 }
+  sysApplNotifications     OBJECT IDENTIFIER ::= { sysApplMIB 2 }
+  sysApplConformance       OBJECT IDENTIFIER ::= { sysApplMIB 3 }
+
+  -- Textual Conventions
+
+  RunState ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION
+          "This TC describes the current execution state of
+          a running application or process.  The possible
+          values are:
+
+            running(1),
+            runnable(2),  - waiting for a resource (CPU, etc.)
+            waiting(3),   - waiting for an event
+            exiting(4),
+            other(5)      - other invalid state"
+      SYNTAX      INTEGER {
+                  running (1),
+                  runnable (2), -- waiting for resource (CPU, etc.)
+                  waiting (3),  -- waiting for event
+                  exiting (4),
+                  other (5)     -- other invalid state
+                  }
+
+LongUtf8String ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "1024a"
+        STATUS  current
+        DESCRIPTION
+                "To facilitate internationalization, this TC
+                 represents information taken from the ISO/IEC IS
+                 10646-1 character set, encoded as an octet string
+                 using the UTF-8 character encoding scheme described
+                 in RFC 2044 [10].  For strings in 7-bit US-ASCII,
+                 there is no impact since the UTF-8 representation
+                 is identical to the US-ASCII encoding."
+        SYNTAX  OCTET STRING (SIZE (0..1024))
+
+Utf8String ::= TEXTUAL-CONVENTION
+        DISPLAY-HINT "255a"
+        STATUS  current
+        DESCRIPTION
+                "To facilitate internationalization, this TC
+                 represents information taken from the ISO/IEC IS
+                 10646-1 character set, encoded as an octet string
+                 using the UTF-8 character encoding scheme described
+                 in RFC 2044 [10].  For strings in 7-bit US-ASCII,
+                 there is no impact since the UTF-8 representation
+                 is identical to the US-ASCII encoding."
+        SYNTAX  OCTET STRING (SIZE (0..255))
+
+  -- sysApplInstalled Group
+  -- This group provides information about application packages
+  -- that have been installed on the host computer.  The group
+  -- contains two tables.  The first, the sysApplInstallPkgTable,
+  -- describes the application packages, the second, the
+  -- sysApplInstallElmtTable, describes the constituent elements
+  -- (files and executables) which compose an application package.
+
+  --
+  -- In order to appear in this group, an application and its
+  -- component files must be discoverable by the system itself,
+  -- possibly through some type of software installation mechanism
+  -- or registry.
+
+  -- sysApplInstallPkgTable
+  -- The system installed application packages table provides
+  -- information on the software packages installed on a system.
+  -- These packages may consist of many different files including
+  -- executable and non-executable files.
+
+  sysApplInstallPkgTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplInstallPkgEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table listing the software application packages
+          installed on a host computer. In order to appear in
+          this table, it may be necessary for the application
+          to be installed using some type of software
+          installation mechanism or global registry so that its
+          existence can be detected by the agent implementation."
+      ::= { sysApplInstalled 1 }
+
+  sysApplInstallPkgEntry OBJECT-TYPE
+      SYNTAX      SysApplInstallPkgEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The logical row describing an installed application
+          package."
+      INDEX    { sysApplInstallPkgIndex }
+      ::= { sysApplInstallPkgTable 1 }
+
+  SysApplInstallPkgEntry ::= SEQUENCE {
+      sysApplInstallPkgIndex               Unsigned32,
+      sysApplInstallPkgManufacturer        Utf8String,
+      sysApplInstallPkgProductName         Utf8String,
+      sysApplInstallPkgVersion             Utf8String,
+      sysApplInstallPkgSerialNumber        Utf8String,
+      sysApplInstallPkgDate                DateAndTime,
+      sysApplInstallPkgLocation            LongUtf8String
+  }
+
+  sysApplInstallPkgIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "An integer used only for indexing purposes.
+          Generally monotonically increasing from 1 as new
+          applications are installed.
+
+          The value for each installed application must
+          remain constant at least from one re-initialization of
+          the network management entity which implements this
+          MIB module to the next re-initialization.
+
+          The specific value is meaningful only within a given SNMP
+          entity. A sysApplInstallPkgIndex value must not be re-used
+          until the next agent entity restart in the event the
+          installed application entry is deleted."
+      ::= { sysApplInstallPkgEntry 1 }
+
+  sysApplInstallPkgManufacturer OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The Manufacturer of the software application package."
+      ::= { sysApplInstallPkgEntry 2 }
+
+  sysApplInstallPkgProductName OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The name assigned to the software application package
+          by the Manufacturer."
+      ::= { sysApplInstallPkgEntry 3 }
+
+  sysApplInstallPkgVersion OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The version number assigned to the application package
+          by the manufacturer of the software."
+      ::= { sysApplInstallPkgEntry 4 }
+
+  sysApplInstallPkgSerialNumber OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The serial number of the software assigned by the
+          manufacturer."
+      ::= { sysApplInstallPkgEntry 5 }
+
+  sysApplInstallPkgDate OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The date and time this software application was installed
+          on the host."
+      ::= { sysApplInstallPkgEntry 6 }
+
+  sysApplInstallPkgLocation OBJECT-TYPE
+      SYNTAX      LongUtf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The complete path name where the application package
+          is installed.  For example, the value would be
+          '/opt/MyapplDir' if the application package was installed
+          in the /opt/MyapplDir directory."
+      ::= { sysApplInstallPkgEntry 7 }
+
+  -- sysApplInstallElmtTable
+  -- The table describing the individual application package
+  -- elements (files and executables) installed on the host computer.
+
+  sysApplInstallElmtTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplInstallElmtEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "This table details the individual application package
+          elements (files and executables) which comprise the
+          applications defined in the sysApplInstallPkg Table.
+          Each entry in this table has an index to the
+          sysApplInstallPkg table to identify the application
+          package of which it is a part. As a result, there may
+          be many entries in this table for each instance in the
+          sysApplInstallPkg Table.
+
+          Table entries are indexed by sysApplInstallPkgIndex,
+          sysApplInstallElmtIndex to facilitate retrieval of
+          all elements associated with a particular installed
+          application package."
+      ::= { sysApplInstalled 2 }
+
+  sysApplInstallElmtEntry OBJECT-TYPE
+      SYNTAX      SysApplInstallElmtEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The logical row describing an element of an installed
+          application.  The element may be an executable or
+          non-executable file."
+      INDEX    {sysApplInstallPkgIndex, sysApplInstallElmtIndex}
+      ::= { sysApplInstallElmtTable 1 }
+
+  SysApplInstallElmtEntry ::= SEQUENCE {
+      sysApplInstallElmtIndex                 Unsigned32,
+      sysApplInstallElmtName                  Utf8String,
+      sysApplInstallElmtType                  INTEGER,
+      sysApplInstallElmtDate                  DateAndTime,
+      sysApplInstallElmtPath                  LongUtf8String,
+      sysApplInstallElmtSizeHigh              Unsigned32,
+      sysApplInstallElmtSizeLow               Unsigned32,
+      sysApplInstallElmtRole                  BITS,
+      sysApplInstallElmtModifyDate            DateAndTime,
+      sysApplInstallElmtCurSizeHigh           Unsigned32,
+      sysApplInstallElmtCurSizeLow            Unsigned32
+
+  }
+
+  sysApplInstallElmtIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "An arbitrary integer used for indexing.  The value
+          of this index is unique among all rows in this table
+          that exist or have existed since the last agent restart."
+      ::= { sysApplInstallElmtEntry 1 }
+
+  sysApplInstallElmtName OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The name of this element which is contained in the
+          application."
+      ::= { sysApplInstallElmtEntry 2 }
+
+  sysApplInstallElmtType OBJECT-TYPE
+      SYNTAX      INTEGER {
+                  unknown(1),
+                  nonexecutable(2),
+                  operatingSystem(3),  -- executable
+                  deviceDriver(4),     -- executable
+                  application(5)       -- executable
+                  }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The type of element that is part of the installed
+          application."
+      ::= { sysApplInstallElmtEntry 3 }
+
+  sysApplInstallElmtDate OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The date and time that this component was installed on
+          the system."
+      ::= { sysApplInstallElmtEntry 4 }
+
+  sysApplInstallElmtPath OBJECT-TYPE
+      SYNTAX      LongUtf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The full directory path where this element is installed.
+          For example, the value would be '/opt/EMPuma/bin' for an
+          element installed in the directory '/opt/EMPuma/bin'.
+          Most application packages include information about the
+          elements contained in the package. In addition, elements
+          are typically installed in sub-directories under the
+          package installation directory.  In cases where the
+          element path names are not included in the package
+          information itself, the path can usually be determined
+          by a simple search of the sub-directories.  If the
+          element is not installed in that location and there is
+          no other information available to the agent implementation,
+          then the path is unknown and null is returned."
+      ::= { sysApplInstallElmtEntry 5}
+
+  sysApplInstallElmtSizeHigh OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The installed file size in 2^32 byte blocks. This is
+          the size of the file on disk immediately after installation.
+
+          For example, for a file with a total size of 4,294,967,296
+          bytes, this variable would have a value of 1; for a file
+          with a total size of 4,294,967,295 bytes this variable
+          would be 0."
+      ::= { sysApplInstallElmtEntry 6 }
+
+  sysApplInstallElmtSizeLow OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The installed file size modulo 2^32 bytes.  This is
+          the size of the file on disk immediately after installation.
+
+          For example, for a file with a total size of 4,294,967,296
+          bytes this variable would have a value of 0; for a file with
+          a total size of 4,294,967,295 bytes this variable would be
+          4,294,967,295."
+      ::= { sysApplInstallElmtEntry 7 }
+
+  sysApplInstallElmtRole  OBJECT-TYPE
+      SYNTAX      BITS {
+                  executable(0),
+                     -- An application may have one or
+                     -- more executable elements.  The rest of the
+                     -- bits have no meaning if the element is not
+                     -- executable.
+                  exclusive(1),
+                     -- Only one copy of an exclusive element may be
+                     -- running per invocation of the running
+                     -- application.
+                  primary(2),
+                     -- The primary executable.  An application can
+                     -- have one, and only one element that is designated
+                     -- as the primary executable.  The execution of
+                     -- this element constitutes an invocation of
+                     -- the application.  This is used by the agent
+                     -- implementation to determine the initiation of
+                     -- an application.  The primary executable must
+                     -- remain running long enough for the agent
+                     -- implementation to detect its presence.
+                  required(3),
+                     -- An application may have zero or more required
+                     -- elements. All required elements must be running
+
+                     -- in order for the application to be judged to be
+                     -- running and healthy.
+                  dependent(4),
+                     -- An application may have zero or more
+                     -- dependent elements. Dependent elements may
+                     -- not be running unless required elements are.
+                  unknown(5)
+                     -- Default value for the case when an operator
+                     -- has not yet assigned one of the other values.
+                     -- When set, bits 1, 2, 3, and 4 have no meaning.
+                  }
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+          "An operator assigned value used in the determination of
+          application status. This value is used by the agent to
+          determine both the mapping of started processes to the
+          initiation of an application, as well as to allow for a
+          determination of application health. The default value,
+          unknown(5), is used when an operator has not yet assigned
+          one of the other values.  If unknown(5) is set, bits
+          1 - 4 have no meaning.  The possible values are:
+
+                  executable(0),
+                      An application may have one or
+                      more executable elements.  The rest of the
+                      bits have no meaning if the element is not
+                      executable.
+                  exclusive(1),
+                      Only one copy of an exclusive element may be
+                      running per invocation of the running
+                      application.
+                  primary(2),
+                      The primary executable.  An application can
+                      have one, and only one element that is designated
+                      as the primary executable.  The execution of
+                      this element constitutes an invocation of
+                      the application.  This is used by the agent
+                      implementation to determine the initiation of
+                      an application.  The primary executable must
+                      remain running long enough for the agent
+                      implementation to detect its presence.
+                  required(3),
+                      An application may have zero or more required
+                      elements. All required elements must be running
+                      in order for the application to be judged to be
+                      running and healthy.
+                  dependent(4),
+                      An application may have zero or more
+                      dependent elements. Dependent elements may
+                      not be running unless required elements are.
+                  unknown(5)
+                      Default value for the case when an operator
+                      has not yet assigned one of the other values.
+                      When set, bits 1, 2, 3, and 4 have no meaning.
+
+           sysApplInstallElmtRole is used by the agent implementation
+           in determining the initiation of an application, the
+           current state of a running application (see
+           sysApplRunCurrentState), when an application invocation is
+           no longer running, and the exit status of a terminated
+           application invocation (see sysApplPastRunExitState)."
+      DEFVAL { { unknown } }
+      ::= { sysApplInstallElmtEntry 8 }
+
+  sysApplInstallElmtModifyDate OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The date and time that this element was last modified.
+          Modification of the sysApplInstallElmtRole columnar
+          object does NOT constitute a modification of the element
+          itself and should not affect the value of this object."
+      ::= { sysApplInstallElmtEntry 9 }
+
+  sysApplInstallElmtCurSizeHigh OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current file size in 2^32 byte blocks.
+          For example, for a file with a total size of 4,294,967,296
+          bytes, this variable would have a value of 1; for a file
+          with a total size of 4,294,967,295 bytes this variable
+          would be 0."
+      ::= { sysApplInstallElmtEntry 10 }
+
+  sysApplInstallElmtCurSizeLow OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current file size modulo 2^32 bytes.
+          For example, for a file with a total size of 4,294,967,296
+
+          bytes this variable would have a value of 0; for a file with
+          a total size of 4,294,967,295 bytes this variable would be
+          4,294,967,295."
+      ::= { sysApplInstallElmtEntry 11 }
+
+  -- sysApplRun Group
+  -- This group models activity information for applications
+  -- that have been invoked and are either currently running,
+  -- or have previously run on the host system.  Likewise,
+  -- the individual elements of an invoked application are
+  -- also modeled to show currently running processes, and
+  -- processes that have run in the past.
+
+  -- sysApplRunTable
+  -- The sysApplRunTable contains the application instances
+  -- which are currently running on the host.  Since a single
+  -- application might be invoked multiple times, an entry is
+  -- added to this table for each INVOCATION of an application.
+  -- The table is indexed by sysApplInstallPkgIndex, sysApplRunIndex
+  -- to enable managers to easily locate all invocations of
+  -- a particular application package.
+
+  sysApplRunTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table describes the applications which are executing
+          on the host.  Each time an application is invoked,
+          an entry is created in this table. When an application ends,
+          the entry is removed from this table and a corresponding
+                  entry is created in the SysApplPastRunTable.
+
+          A new entry is created in this table whenever the agent
+          implementation detects a new running process that is an
+          installed application element whose sysApplInstallElmtRole
+          designates it as being the application's primary executable
+          (sysApplInstallElmtRole = primary(2) ).
+
+          The table is indexed by sysApplInstallPkgIndex,
+          sysApplRunIndex to enable managers to easily locate all
+          invocations of a particular application package."
+      ::= { sysApplRun 1 }
+
+  sysApplRunEntry OBJECT-TYPE
+      SYNTAX      SysApplRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The logical row describing an application which is
+          currently running on this host."
+      INDEX    { sysApplInstallPkgIndex, sysApplRunIndex }
+      ::= { sysApplRunTable   1 }
+
+  SysApplRunEntry ::= SEQUENCE {
+      sysApplRunIndex                         Unsigned32,
+      sysApplRunStarted                       DateAndTime,
+      sysApplRunCurrentState                  RunState
+  }
+
+  sysApplRunIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table. An arbitrary
+          integer used only for indexing purposes. Generally
+          monotonically increasing from 1 as new applications are
+          started on the host, it uniquely identifies application
+          invocations.
+
+          The numbering for this index increases by 1 for each
+          INVOCATION of an application, regardless of which
+          installed application package this entry represents a
+          running instance of.
+
+          An example of the indexing for a couple of entries is
+          shown below.
+
+                        :
+                   sysApplRunStarted.17.14
+                   sysApplRunStarted.17.63
+                   sysApplRunStarted.18.13
+                        :
+
+          In this example, the agent has observed 12 application
+          invocations when the application represented by entry 18
+          in the sysApplInstallPkgTable is invoked.  The next
+          invocation detected by the agent is an invocation of
+          installed application package 17.  Some time later,
+          installed application 17 is invoked a second time.
+
+          NOTE: this index is not intended to reflect a real-time
+          (wall clock time) ordering of application invocations;
+
+          it is merely intended to uniquely identify running
+          instances of applications.  Although the
+          sysApplInstallPkgIndex is included in the INDEX clause
+          for this table, it serves only to ease searching of
+          this table by installed application and does not
+          contribute to uniquely identifying table entries."
+      ::= { sysApplRunEntry 1 }
+
+  sysApplRunStarted OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The date and time that the application was started."
+      ::= { sysApplRunEntry 2 }
+
+  sysApplRunCurrentState OBJECT-TYPE
+      SYNTAX      RunState
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current state of the running application instance.
+          The possible values are running(1), runnable(2) but waiting
+          for a resource such as CPU, waiting(3) for an event,
+          exiting(4), or other(5). This value is based on an evaluation
+          of the running elements of this application instance (see
+          sysApplElmRunState) and their Roles as defined by
+          sysApplInstallElmtRole.  An agent implementation may
+          detect that an application instance is in the process of
+          exiting if one or more of its REQUIRED elements are no
+          longer running.  Most agent implementations will wait until
+          a second internal poll has been completed to give the
+          system time to start REQUIRED elements before marking the
+          application instance as exiting."
+      ::= { sysApplRunEntry 3 }
+
+  -- sysApplPastRunTable
+  -- The sysApplPastRunTable provides a history of applications
+  -- previously run on the host computer. Entries are removed from
+  -- the sysApplRunTable and corresponding entries are added to this
+  -- table when an application becomes inactive. Entries remain in
+  -- this table until they are aged out when either the table size
+  -- reaches a maximum as determined by the sysApplPastRunMaxRows,
+  -- or when an entry has aged to exceed a time limit as set be
+  -- sysApplPastRunTblTimeLimit.
+  --
+  -- When aging out entries, the oldest entry, as determined by
+
+  -- the value of sysApplPastRunTimeEnded, will be removed first.
+
+  sysApplPastRunTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplPastRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "A history of the applications that have previously run
+          on the host computer.  An entry's information is moved to
+          this table from the sysApplRunTable when the invoked
+          application represented by the entry ceases to be running.
+
+          An agent implementation can determine that an application
+          invocation is no longer running by evaluating the running
+          elements of the application instance and their Roles as
+          defined by sysApplInstallElmtRole.  Obviously, if there
+          are no running elements for the application instance,
+          then the application invocation is no longer running.
+          If any one of the REQUIRED elements is not running,
+          the application instance may be in the process of exiting.
+          Most agent implementations will wait until a second internal
+          poll has been completed to give the system time to either
+          restart partial failures or to give all elements time to
+          exit.  If, after the second poll, there are REQUIRED
+          elements that are not running, then the application
+          instance may be considered by the agent implementation
+          to no longer be running.
+
+          Entries remain in the sysApplPastRunTable until they
+          are aged out when either the table size reaches a maximum
+          as determined by the sysApplPastRunMaxRows, or when an entry
+          has aged to exceed a time limit as set by
+          sysApplPastRunTblTimeLimit.
+
+          Entries in this table are indexed by sysApplInstallPkgIndex,
+          sysApplPastRunIndex to facilitate retrieval of all past
+          run invocations of a particular installed application."
+      ::= { sysApplRun 2 }
+
+  sysApplPastRunEntry OBJECT-TYPE
+      SYNTAX      SysApplPastRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The logical row describing an invocation of an application
+          which was previously run and has terminated.  The entry
+          is basically copied from the sysApplRunTable when the
+          application instance terminates.  Hence, the entry's
+
+          value for sysApplPastRunIndex is the same as its value was
+          for sysApplRunIndex."
+      INDEX    { sysApplInstallPkgIndex, sysApplPastRunIndex }
+      ::= { sysApplPastRunTable   1 }
+
+  SysApplPastRunEntry ::= SEQUENCE {
+      sysApplPastRunIndex                     Unsigned32,
+      sysApplPastRunStarted                   DateAndTime,
+      sysApplPastRunExitState                 INTEGER,
+      sysApplPastRunTimeEnded                 DateAndTime
+  }
+
+  sysApplPastRunIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table. An integer
+          matching the value of the removed sysApplRunIndex
+          corresponding to this row."
+      ::= { sysApplPastRunEntry 1 }
+
+  sysApplPastRunStarted OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The date and time that the application was started."
+      ::= { sysApplPastRunEntry 2 }
+
+  sysApplPastRunExitState OBJECT-TYPE
+      SYNTAX      INTEGER {
+                  complete (1), -- normal exit at sysApplRunTimeEnded
+                  failed (2),   -- abnormal exit
+                  other (3)
+                  }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+        "The state of the application instance when it terminated.
+         This value is based on an evaluation of the running elements
+         of an application and their Roles as defined by
+         sysApplInstallElmtRole.  An application instance is said to
+         have exited in a COMPLETE state and its entry is removed
+         from the sysApplRunTable and added to the sysApplPastRunTable
+         when the agent detects that ALL elements of an application
+         invocation are no longer running.  Most agent implementations
+         will wait until a second internal poll has been completed to
+
+         give the system time to either restart partial failures or
+         to give all elements time to exit.  A failed state occurs if,
+         after the second poll, any elements continue to run but
+         one or more of the REQUIRED elements are no longer running.
+         All other combinations MUST be defined as OTHER."
+      ::= { sysApplPastRunEntry 3 }
+
+  sysApplPastRunTimeEnded OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The DateAndTime the application instance was determined
+          to be no longer running."
+      ::= { sysApplPastRunEntry 4 }
+
+  -- sysApplElmtRunTable
+  -- The sysApplElmtRunTable contains an entry for each process that
+  -- is currently running on the host.  An entry is created in
+  -- this table for each process at the time it is started, and will
+  -- remain in the table until the process terminates.
+  --
+  -- The table is indexed by sysApplElmtRunInstallPkg,
+  -- sysApplElmtRunInvocID, and sysApplElmtRunIndex to make it easy
+  -- to locate all running elements of a particular invoked application
+  -- which has been installed on the system.
+
+  sysApplElmtRunTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplElmtRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table describes the processes which are
+          currently executing on the host system. Each entry
+          represents a running process and is associated with
+          the invoked application of which that process is a part, if
+          possible.  This table contains an entry for every process
+          currently running on the system, regardless of whether its
+          'parent' application can be determined.  So, for example,
+          processes like 'ps' and 'grep' will have entries though they
+          are not associated with an installed application package.
+
+          Because a running application may involve
+          more than one executable, it is possible to have
+          multiple entries in this table for each application.
+          Entries are removed from this table when the process
+          terminates.
+
+          The table is indexed by sysApplElmtRunInstallPkg,
+          sysApplElmtRunInvocID, and sysApplElmtRunIndex to
+          facilitate the retrieval of all running elements of a
+          particular invoked application which has been installed on
+          the system."
+      ::= { sysApplRun 3 }
+
+  sysApplElmtRunEntry OBJECT-TYPE
+      SYNTAX      SysApplElmtRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The logical row describing a process currently
+          running on this host.  When possible, the entry is
+          associated with the invoked application of which it
+          is a part."
+      INDEX    { sysApplElmtRunInstallPkg, sysApplElmtRunInvocID,
+                 sysApplElmtRunIndex }
+      ::= { sysApplElmtRunTable   1 }
+
+  SysApplElmtRunEntry ::= SEQUENCE {
+      sysApplElmtRunInstallPkg        Unsigned32,
+      sysApplElmtRunInvocID           Unsigned32,
+      sysApplElmtRunIndex             Unsigned32,
+      sysApplElmtRunInstallID         Unsigned32,
+      sysApplElmtRunTimeStarted       DateAndTime,
+      sysApplElmtRunState             RunState,
+      sysApplElmtRunName              LongUtf8String,
+      sysApplElmtRunParameters        Utf8String,
+      sysApplElmtRunCPU               TimeTicks,
+      sysApplElmtRunMemory            Gauge32,
+      sysApplElmtRunNumFiles          Gauge32,
+      sysApplElmtRunUser              Utf8String
+  }
+
+  sysApplElmtRunInstallPkg OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table, this value
+          identifies the installed software package for
+          the application of which this process is a part.
+          Provided that the process's 'parent' application can be
+          determined, the value of this object is the same
+          value as the sysApplInstallPkgIndex for the
+          entry in the sysApplInstallPkgTable that corresponds
+          to the installed application of which this process
+
+          is a part.
+
+          If, however, the 'parent' application cannot be
+          determined, (for example the process is not part
+          of a particular installed application), the value
+          for this object is then '0', signifying that this
+          process cannot be related back to an application,
+          and in turn, an installed software package."
+      ::= { sysApplElmtRunEntry 1 }
+
+  sysApplElmtRunInvocID OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table, this value
+          identifies the invocation of an application of which
+          this process is a part.  Provided that the 'parent'
+          application can be determined, the value of this object
+          is the same value as the sysApplRunIndex for the
+          corresponding application invocation in the
+          sysApplRunTable.
+
+          If, however, the 'parent' application cannot be
+          determined, the value for this object is then '0',
+          signifying that this process cannot be related back
+          to an invocation of an application in the
+          sysApplRunTable."
+      ::= { sysApplElmtRunEntry 2 }
+
+  sysApplElmtRunIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table.  A unique value
+          for each process running on the host.  Wherever
+          possible, this should be the system's native, unique
+          identification number."
+      ::= { sysApplElmtRunEntry 3 }
+
+  sysApplElmtRunInstallID OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The index into the sysApplInstallElmtTable. The
+
+          value of this object is the same value as the
+          sysApplInstallElmtIndex for the application element
+          of which this entry represents a running instance.
+          If this process cannot be associated with an installed
+          executable, the value should be '0'."
+      ::= { sysApplElmtRunEntry 4 }
+
+  sysApplElmtRunTimeStarted OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The time the process was started."
+      ::= { sysApplElmtRunEntry 5 }
+
+  sysApplElmtRunState OBJECT-TYPE
+      SYNTAX      RunState
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current state of the running process. The
+          possible values are running(1), runnable(2) but waiting
+          for a resource such as CPU, waiting(3) for an event,
+          exiting(4), or other(5)."
+      ::= { sysApplElmtRunEntry 6 }
+
+  sysApplElmtRunName OBJECT-TYPE
+      SYNTAX      LongUtf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The full path and filename of the process.
+          For example, '/opt/MYYpkg/bin/myyproc' would
+          be returned for process 'myyproc' whose execution
+          path is '/opt/MYYpkg/bin/myyproc'."
+      ::= { sysApplElmtRunEntry 7 }
+
+  sysApplElmtRunParameters OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The starting parameters for the process."
+  ::= { sysApplElmtRunEntry 8 }
+
+  sysApplElmtRunCPU OBJECT-TYPE
+      SYNTAX      TimeTicks
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+           "The number of centi-seconds of the total system's
+           CPU resources consumed by this process.  Note that
+           on a multi-processor system, this value may
+           have been incremented by more than one centi-second
+           in one centi-second of real (wall clock) time."
+      ::= { sysApplElmtRunEntry 9 }
+
+  sysApplElmtRunMemory OBJECT-TYPE
+      SYNTAX      Gauge32
+      UNITS       "Kbytes"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The total amount of real system memory measured in
+          Kbytes currently allocated to this process."
+      ::= { sysApplElmtRunEntry 10 }
+
+  sysApplElmtRunNumFiles OBJECT-TYPE
+      SYNTAX      Gauge32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of regular files currently open by the
+          process.  Transport connections (sockets)
+          should NOT be included in the calculation of
+          this value, nor should operating system specific
+          special file types."
+      ::= { sysApplElmtRunEntry 11 }
+
+  sysApplElmtRunUser OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The process owner's login name (e.g. root)."
+      ::= { sysApplElmtRunEntry 12 }
+
+  -- sysApplElmtPastRunTable
+  -- The sysApplElmtPastRunTable maintains a history of
+  -- processes which have previously executed on
+  -- the host as part of an application. Upon termination
+  -- of a process, the entry representing the process is removed from
+  -- the sysApplElmtRunTable and a corresponding entry is created in
+  -- this table provided that the process was part of an
+  -- identifiable application.  If the process could not be associated
+
+  -- with an invoked application, no corresponding entry is created.
+  -- Hence, whereas the sysApplElmtRunTable contains an entry for
+  -- every process currently executing on the system, the
+  -- sysApplElmtPastRunTable only contains entries for processes
+  -- that previously executed as part of an invoked application.
+  --
+  -- Entries remain in this table until they are aged out when
+  -- either the number of entries in the table reaches a
+  -- maximum as determined by sysApplElmtPastRunMaxRows, or
+  -- when an entry has aged to exceed a time limit as set by
+  -- sysApplElmtPastRunTblTimeLimit.  When aging out entries,
+  -- the oldest entry, as determined by the value of
+  -- sysApplElmtPastRunTimeEnded, will be removed first.
+  --
+  -- The table is indexed by sysApplInstallPkgIndex (from the
+  -- sysApplInstallPkgTable), sysApplElmtPastRunInvocID, and
+  -- sysApplElmtPastRunIndex to make it easy to locate all
+  -- previously executed processes of a particular invoked application
+  -- that has been installed on the system.
+
+  sysApplElmtPastRunTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplElmtPastRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table describes the processes which have previously
+          executed on the host system as part of an application.
+          Each entry represents a process which has previously
+          executed and is associated with the invoked application
+          of which it was a part.  Because an invoked application
+          may involve more than one executable, it is possible
+          to have multiple entries in this table for
+          each application invocation. Entries are added
+          to this table when the corresponding process in the
+          sysApplElmtRun Table terminates.
+
+          Entries remain in this table until they are aged out when
+          either the number of entries in the table reaches a
+          maximum as determined by sysApplElmtPastRunMaxRows, or
+          when an entry has aged to exceed a time limit as set by
+          sysApplElmtPastRunTblTimeLimit.  When aging out entries,
+          the oldest entry, as determined by the value of
+          sysApplElmtPastRunTimeEnded, will be removed first.
+
+          The table is indexed by sysApplInstallPkgIndex (from the
+          sysApplInstallPkgTable), sysApplElmtPastRunInvocID,
+          and sysApplElmtPastRunIndex to make it easy to locate all
+
+          previously executed processes of a particular invoked
+          application that has been installed on the system."
+      ::= { sysApplRun 4 }
+
+  sysApplElmtPastRunEntry OBJECT-TYPE
+      SYNTAX      SysApplElmtPastRunEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The logical row describing a process which was
+          previously executed on this host as part of an
+          installed application.  The entry is basically copied
+          from the sysApplElmtRunTable when the process
+          terminates.  Hence, the entry's value for
+          sysApplElmtPastRunIndex is the same as its value
+          was for sysApplElmtRunIndex.  Note carefully: only those
+          processes which could be associated with an
+          identified application are included in this table."
+      INDEX    { sysApplInstallPkgIndex, sysApplElmtPastRunInvocID,
+                 sysApplElmtPastRunIndex }
+      ::= { sysApplElmtPastRunTable   1 }
+
+  SysApplElmtPastRunEntry ::= SEQUENCE {
+      sysApplElmtPastRunInvocID           Unsigned32,
+      sysApplElmtPastRunIndex             Unsigned32,
+      sysApplElmtPastRunInstallID         Unsigned32,
+      sysApplElmtPastRunTimeStarted       DateAndTime,
+      sysApplElmtPastRunTimeEnded         DateAndTime,
+      sysApplElmtPastRunName              LongUtf8String,
+      sysApplElmtPastRunParameters        Utf8String,
+      sysApplElmtPastRunCPU               TimeTicks,
+      sysApplElmtPastRunMemory            Unsigned32,
+      sysApplElmtPastRunNumFiles          Unsigned32,
+      sysApplElmtPastRunUser              Utf8String
+  }
+
+  sysApplElmtPastRunInvocID OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table, this value
+          identifies the invocation of an application of which
+          the process represented by this entry was a part.
+          The value of this object is the same value as the
+          sysApplRunIndex for the corresponding application
+          invocation in the sysApplRunTable.  If the invoked
+          application as a whole has terminated, it will be the
+
+          same as the sysApplPastRunIndex."
+      ::= { sysApplElmtPastRunEntry 1 }
+
+  sysApplElmtPastRunIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Part of the index for this table. An integer
+          assigned by the agent equal to the corresponding
+          sysApplElmtRunIndex which was removed from the
+          sysApplElmtRunTable and moved to this table
+          when the element terminated.
+
+          Note: entries in this table are indexed by
+          sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex.
+          The possibility exists, though unlikely, of a
+          collision occurring by a new entry which was run
+          by the same invoked application (InvocID), and
+          was assigned the same process identification number
+          (ElmtRunIndex) as an element which was previously
+          run by the same invoked application.
+
+          Should this situation occur, the new entry replaces
+          the old entry.
+
+          See Section: 'Implementation Issues -
+          sysApplElmtPastRunTable Entry Collisions' for the
+          conditions that would have to occur in order for a
+          collision to occur."
+      ::= { sysApplElmtPastRunEntry 2 }
+
+  sysApplElmtPastRunInstallID OBJECT-TYPE
+      SYNTAX      Unsigned32 (1..'ffffffff'h)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The index into the installed element table. The
+          value of this object is the same value as the
+          sysApplInstallElmtIndex for the application element
+          of which this entry represents a previously executed
+          process."
+      ::= { sysApplElmtPastRunEntry 3 }
+
+  sysApplElmtPastRunTimeStarted OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The time the process was started."
+      ::= { sysApplElmtPastRunEntry 4 }
+
+  sysApplElmtPastRunTimeEnded OBJECT-TYPE
+      SYNTAX      DateAndTime
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The time the process ended."
+      ::= { sysApplElmtPastRunEntry 5 }
+
+  sysApplElmtPastRunName OBJECT-TYPE
+      SYNTAX      LongUtf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The full path and filename of the process.
+          For example, '/opt/MYYpkg/bin/myyproc' would
+          be returned for process 'myyproc' whose execution
+          path was '/opt/MYYpkg/bin/myyproc'."
+      ::= { sysApplElmtPastRunEntry 6 }
+
+  sysApplElmtPastRunParameters OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The starting parameters for the process."
+      ::= { sysApplElmtPastRunEntry 7 }
+
+  sysApplElmtPastRunCPU OBJECT-TYPE
+      SYNTAX      TimeTicks
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+           "The last known number of centi-seconds of the total
+           system's CPU resources consumed by this process.
+           Note that on a multi-processor system, this value may
+           increment by more than one centi-second in one
+           centi-second of real (wall clock) time."
+      ::= { sysApplElmtPastRunEntry 8 }
+
+  sysApplElmtPastRunMemory OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      UNITS       "Kbytes"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The last known total amount of real system memory
+          measured in Kbytes allocated to this process before it
+          terminated."
+      ::= { sysApplElmtPastRunEntry 9 }
+
+  sysApplElmtPastRunNumFiles OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The last known number of files open by the
+          process before it terminated.  Transport
+          connections (sockets) should NOT be included in
+          the calculation of this value."
+      ::= { sysApplElmtPastRunEntry 10 }
+
+  sysApplElmtPastRunUser OBJECT-TYPE
+      SYNTAX      Utf8String
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The process owner's login name (e.g. root)."
+      ::= { sysApplElmtPastRunEntry 11 }
+
+  -- Additional Scalar objects to control table sizes
+
+  sysApplPastRunMaxRows OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+          "The maximum number of entries allowed in the
+          sysApplPastRunTable.  Once the number of rows in
+          the sysApplPastRunTable reaches this value, the
+          management subsystem will remove the oldest entry
+          in the table to make room for the new entry to be added.
+          Entries will be removed on the basis of oldest
+          sysApplPastRunTimeEnded value first.
+
+          This object may be used to control the amount of
+          system resources that can used for sysApplPastRunTable
+          entries. A conforming implementation should attempt
+          to support the default value, however, a lesser value
+          may be necessary due to implementation-dependent issues
+          and resource availability."
+      DEFVAL      { 500 }
+      ::= { sysApplRun 5 }
+
+  sysApplPastRunTableRemItems OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "A counter of the number of entries removed from
+          the sysApplPastRunTable because of table size limitations
+          as set in sysApplPastRunMaxRows.  This counter is the
+          number of entries the management subsystem has had to
+          remove in order to make room for new entries (so as not
+          to exceed the limit set by sysApplPastRunMaxRows) since
+          the last initialization of the management subsystem."
+      ::= { sysApplRun 6 }
+
+  sysApplPastRunTblTimeLimit OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      UNITS       "seconds"
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+          "The maximum time in seconds which an entry in the
+           sysApplPastRunTable may exist before it is removed.
+           Any entry that is older than this value will be
+           removed (aged out) from the table.
+
+           Note that an entry may be aged out prior to reaching
+           this time limit if it is the oldest entry in the
+           table and must be removed to make space for a new
+           entry so as to not exceed sysApplPastRunMaxRows."
+      DEFVAL      { 7200 }
+      ::= { sysApplRun 7 }
+
+  sysApplElemPastRunMaxRows OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+          "The maximum number of entries allowed in the
+          sysApplElmtPastRunTable.  Once the number of rows in
+          the sysApplElmtPastRunTable reaches this value,
+          the management subsystem will remove the oldest entry
+          to make room for the new entry to be added.  Entries
+          will be removed on the basis of oldest
+          sysApplElmtPastRunTimeEnded value first.
+
+          This object may be used to control the amount of
+          system resources that can used for sysApplElemPastRunTable
+          entries. A conforming implementation should attempt
+          to support the default value, however, a lesser value
+          may be necessary due to implementation-dependent issues
+          and resource availability."
+      DEFVAL      { 500 }
+      ::= { sysApplRun 8 }
+
+  sysApplElemPastRunTableRemItems OBJECT-TYPE
+      SYNTAX      Counter32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "A counter of the number of entries removed from the
+          sysApplElemPastRunTable because of table size limitations
+          as set in sysApplElemPastRunMaxRows.  This counter is the
+          number of entries the management subsystem has had to
+          remove in order to make room for new entries (so as not
+          to exceed the limit set by sysApplElemPastRunMaxRows) since
+          the last initialization of the management subsystem."
+      ::= { sysApplRun 9 }
+
+  sysApplElemPastRunTblTimeLimit OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      UNITS       "seconds"
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+          "The maximum time in seconds which an entry in the
+           sysApplElemPastRunTable may exist before it is removed.
+           Any entry that is older than this value will be
+           removed (aged out) from the table.
+
+           Note that an entry may be aged out prior to reaching
+           this time limit if it is the oldest entry in the
+           table and must be removed to make space for a new
+           entry so as to not exceed sysApplElemPastRunMaxRows."
+      DEFVAL      { 7200 }
+      ::= { sysApplRun 10 }
+
+  sysApplAgentPollInterval  OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      UNITS       "seconds"
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+          "The minimum interval in seconds that the management
+
+          subsystem implementing this MIB will poll the status
+          of the managed resources. Because of the non-trivial
+          effort involved in polling the managed resources,
+          and because the method for obtaining the status of
+          the managed resources is implementation-dependent,
+          a conformant implementation may chose a lower bound
+          greater than 0.
+
+          A value of 0 indicates that there is no delay
+          in the passing of information from the managed
+          resources to the agent."
+      DEFVAL      { 60 }
+      ::= { sysApplRun 11 }
+
+  -- sysApplMap Group
+  -- This group contains a table, the sysApplMapTable,
+  -- whose sole purpose is to provide a 'backwards'
+  -- mapping so that, given a known sysApplElmtRunIndex
+  -- (process identification number), the corresponding invoked
+  -- application (sysApplRunIndex), installed element
+  -- (sysApplInstallElmtIndex), and installed application
+  -- package (sysApplInstallPkgIndex) can be quickly determined.
+  --
+  -- The table will contain one entry for each process
+  -- currently running on the system.
+  --
+  -- A backwards mapping is extremely useful since the tables
+  -- in this MIB module are typically indexed with the
+  -- installed application package (sysApplInstallPkgIndex)
+  -- as the primary key, and on down as required by the
+  -- specific table, with the process ID number (sysApplElmtRunIndex)
+  -- being the least significant key.
+  --
+  -- It is expected that management applications will use
+  -- this mapping table by doing a 'GetNext' operation with
+  -- the known process ID number (sysApplElmtRunIndex) as the partial
+  -- instance identifier.  Assuming that there is an entry for
+  -- the process, the result should return a single columnar value,
+  -- the sysApplMapInstallPkgIndex, with the sysApplElmtRunIndex,
+  -- sysApplRunIndex, and sysApplInstallElmtIndex contained in the
+  -- instance identifier for the returned MIB object value.
+  --
+  -- NOTE: if the process can not be associated back to an
+  -- invoked application installed on the system, then the
+  -- value returned for the columnar value sysApplMapInstallPkgIndex
+  -- will be '0' and the instance portion of the object-identifier
+  -- will be the process ID number (sysApplElmtRunIndex) followed
+
+  -- by 0.0.
+
+  sysApplMapTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF SysApplMapEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The sole purpose of this table is to provide a
+          'backwards' mapping so that, given a known
+          sysApplElmtRunIndex (process identification number),
+          the corresponding invoked application (sysApplRunIndex),
+          installed element (sysApplInstallElmtIndex), and
+          installed application package (sysApplInstallPkgIndex)
+          can be quickly determined.
+
+          This table will contain one entry for each process
+          that is currently executing on the system.
+
+          It is expected that management applications will use
+          this mapping table by doing a 'GetNext' operation with
+          the known process ID number (sysApplElmtRunIndex) as the
+          partial instance identifier.  Assuming that there is an
+          entry for the process, the result should return a single
+          columnar value, the sysApplMapInstallPkgIndex, with the
+          sysApplElmtRunIndex, sysApplRunIndex, and
+          sysApplInstallElmtIndex contained in the instance identifier
+          for the returned MIB object value.
+
+          NOTE: if the process can not be associated back to an
+          invoked application installed on the system, then the
+          value returned for the columnar value
+          sysApplMapInstallPkgIndex will be '0' and the instance
+          portion of the object-identifier will be the process ID
+          number (sysApplElmtRunIndex) followed by 0.0."
+      ::= { sysApplMap 1 }
+
+  sysApplMapEntry OBJECT-TYPE
+      SYNTAX      SysApplMapEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "A logical row representing a process currently running
+           on the system.  This entry provides the index mapping from
+           process identifier, back to the invoked application,
+           installed element, and finally, the installed application
+           package.  The entry includes only one accessible columnar
+           object, the sysApplMapInstallPkgIndex, but the
+           invoked application and installed element can be
+
+           determined from the instance identifier since they form
+           part of the index clause."
+      INDEX  { sysApplElmtRunIndex, sysApplElmtRunInvocID,
+               sysApplMapInstallElmtIndex }
+      ::= { sysApplMapTable 1 }
+
+  SysApplMapEntry ::= SEQUENCE {
+      sysApplMapInstallElmtIndex    Unsigned32,
+      sysApplMapInstallPkgIndex     Unsigned32
+  }
+
+  sysApplMapInstallElmtIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index into the sysApplInstallElmtTable. The
+          value of this object is the same value as the
+          sysApplInstallElmtIndex for the application element
+          of which this entry represents a running instance.
+          If this process cannot be associated to an installed
+          executable, the value should be '0'."
+      ::= { sysApplMapEntry 1 }
+
+  sysApplMapInstallPkgIndex OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..'ffffffff'h)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The value of this object identifies the installed
+          software package for the application of which this
+          process is a part.  Provided that the process's 'parent'
+          application can be determined, the value of this object
+          is the same value as the sysApplInstallPkgIndex for the
+          entry in the sysApplInstallPkgTable that corresponds
+          to the installed application of which this process
+          is a part.
+
+          If, however, the 'parent' application cannot be
+          determined, (for example the process is not part
+          of a particular installed application), the value
+          for this object is then '0', signifying that this
+          process cannot be related back to an application,
+          and in turn, an installed software package."
+      ::= { sysApplMapEntry 2 }
+
+  -- Conformance Macros
+
+  sysApplMIBCompliances  OBJECT IDENTIFIER ::= { sysApplConformance 1 }
+  sysApplMIBGroups       OBJECT IDENTIFIER ::= { sysApplConformance 2 }
+
+  sysApplMIBCompliance MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+          "Describes the requirements for conformance to
+          the System Application MIB"
+      MODULE  -- this module
+          MANDATORY-GROUPS { sysApplInstalledGroup,
+                             sysApplRunGroup, sysApplMapGroup }
+      ::= { sysApplMIBCompliances 1 }
+
+  sysApplInstalledGroup OBJECT-GROUP
+      OBJECTS { sysApplInstallPkgManufacturer,
+                sysApplInstallPkgProductName,
+                sysApplInstallPkgVersion,
+                sysApplInstallPkgSerialNumber,
+                sysApplInstallPkgDate,
+                sysApplInstallPkgLocation,
+                sysApplInstallElmtName,
+                sysApplInstallElmtType,
+                sysApplInstallElmtDate,
+                sysApplInstallElmtPath,
+                sysApplInstallElmtSizeHigh,
+                sysApplInstallElmtSizeLow,
+                sysApplInstallElmtRole,
+                sysApplInstallElmtModifyDate,
+                sysApplInstallElmtCurSizeHigh,
+                sysApplInstallElmtCurSizeLow }
+      STATUS  current
+      DESCRIPTION
+          "The system application installed group contains
+          information about applications and their constituent
+          components which have been installed on the host system."
+      ::= { sysApplMIBGroups 1 }
+
+  sysApplRunGroup OBJECT-GROUP
+      OBJECTS { sysApplRunStarted,
+                sysApplRunCurrentState,
+                sysApplPastRunStarted,
+                sysApplPastRunExitState,
+                sysApplPastRunTimeEnded,
+                sysApplElmtRunInstallID,
+                sysApplElmtRunTimeStarted,
+                sysApplElmtRunState,
+                sysApplElmtRunName,
+                sysApplElmtRunParameters,
+                sysApplElmtRunCPU,
+                sysApplElmtRunMemory,
+                sysApplElmtRunNumFiles,
+                sysApplElmtRunUser,
+                sysApplElmtPastRunInstallID,
+                sysApplElmtPastRunTimeStarted,
+                sysApplElmtPastRunTimeEnded,
+                sysApplElmtPastRunName,
+                sysApplElmtPastRunParameters,
+                sysApplElmtPastRunCPU,
+                sysApplElmtPastRunMemory,
+                sysApplElmtPastRunNumFiles,
+                sysApplElmtPastRunUser,
+                sysApplPastRunMaxRows,
+                sysApplPastRunTableRemItems,
+                sysApplPastRunTblTimeLimit,
+                sysApplElemPastRunMaxRows,
+                sysApplElemPastRunTableRemItems,
+                sysApplElemPastRunTblTimeLimit,
+                sysApplAgentPollInterval }
+      STATUS  current
+      DESCRIPTION
+          "The system application run group contains information
+          about applications and associated elements which have
+          run or are currently running on the host system."
+      ::= { sysApplMIBGroups 2 }
+
+  sysApplMapGroup OBJECT-GROUP
+      OBJECTS { sysApplMapInstallPkgIndex }
+      STATUS  current
+      DESCRIPTION
+          "The Map Group contains a single table, sysApplMapTable,
+          that provides a backwards mapping for determining the
+          invoked application, installed element, and installed
+          application package given a known process identification
+          number."
+  ::= { sysApplMIBGroups 3 }
+
+  END
diff --git a/snmp_builder/mibs/SYSLOG-MSG-MIB.mib b/snmp_builder/mibs/SYSLOG-MSG-MIB.mib
new file mode 100644
index 0000000..fae6167
--- /dev/null
+++ b/snmp_builder/mibs/SYSLOG-MSG-MIB.mib
@@ -0,0 +1,598 @@
+SYSLOG-MSG-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, mib-2
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DisplayString, TruthValue
+        FROM SNMPv2-TC
+    OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
+        FROM SNMPv2-CONF
+    SyslogFacility, SyslogSeverity
+
+        FROM SYSLOG-TC-MIB;
+
+syslogMsgMib MODULE-IDENTITY
+    LAST-UPDATED "200908130800Z"
+    ORGANIZATION "IETF OPSAWG Working Group"
+    CONTACT-INFO
+        "Juergen Schoenwaelder
+         <j.schoenwaelder@jacobs-university.de>
+         Jacobs University Bremen
+         Campus Ring 1
+         28757 Bremen
+         Germany
+
+         Alexander Clemm
+         <alex@cisco.com>
+         Cisco Systems
+         170 West Tasman Drive
+         San Jose, CA 95134-1706
+         USA
+
+         Anirban Karmakar
+         <akarmaka@cisco.com>
+         Cisco Systems India Pvt Ltd
+         SEZ Unit, Cessna Business Park,
+         Sarjapur Marathahalli ORR,
+         Bangalore, Karnataka 560103
+         India"
+    DESCRIPTION
+        "This MIB module represents SYSLOG messages as SNMP objects.
+
+         Copyright (c) 2009 IETF Trust and the persons identified as
+         authors of the code.  All rights reserved.
+
+         Redistribution and use in source and binary forms, with or
+         without modification, is permitted pursuant to, and subject
+         to the license terms contained in, the Simplified BSD License
+         set forth in Section 4.c of the IETF Trust's Legal Provisions
+         Relating to IETF Documents
+         (http://trustee.ietf.org/license-info).
+
+         This version of this MIB module is part of RFC 5676; see
+         the RFC itself for full legal notices."
+
+    REVISION "200908130800Z"
+    DESCRIPTION
+        "Initial version issued as part of RFC 5676."
+    ::= { mib-2 192 }
+
+-- textual convention definitions
+
+SyslogTimeStamp ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d-1d-1d,1d:1d:1d.3d,1a1d:1d"
+    STATUS       current
+    DESCRIPTION
+       "A date-time specification.  This type is similar to the
+        DateAndTime type defined in the SNMPv2-TC, except the
+        subsecond granulation is microseconds instead of
+        deciseconds and a zero-length string can be used
+        to indicate a missing value.
+
+        field  octets  contents                  range
+        -----  ------  --------                  -----
+          1      1-2   year*                     0..65536
+          2       3    month                     1..12
+          3       4    day                       1..31
+          4       5    hour                      0..23
+          5       6    minutes                   0..59
+          6       7    seconds                   0..60
+                       (use 60 for leap-second)
+          7     8-10   microseconds*             0..999999
+          8      11    direction from UTC        '+' / '-'
+          9      12    hours from UTC*           0..13
+         10      13    minutes from UTC          0..59
+
+        * Notes:
+        - the value of year is in network-byte order
+        - the value of microseconds is in network-byte order
+        - daylight saving time in New Zealand is +13
+
+        For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
+        displayed as:
+
+                        1992-5-26,13:30:15.0,-4:0
+
+        Note that if only local time is known, then timezone
+        information (fields 11-13) is not present."
+    SYNTAX      OCTET STRING (SIZE (0 | 10 | 13))
+
+SyslogParamValueString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "65535t"
+    STATUS       current
+    DESCRIPTION
+       "The value of a SYSLOG SD-PARAM is represented using the
+        ISO/IEC IS 10646-1 character set, encoded as an octet string
+        using the UTF-8 transformation format described in RFC 3629.
+
+        Since additional code points are added by amendments to the
+        10646 standard from time to time, implementations must be
+        prepared to encounter any code point from 0x00000000 to
+        0x7fffffff.  Byte sequences that do not correspond to the
+        valid UTF-8 encoding of a code point or that are outside this
+        range are prohibited.  Similarly, overlong UTF-8 sequences
+        are prohibited.
+
+        UTF-8 may require multiple bytes to represent a single
+        character / code point; thus, the length of this object in
+        octets may be different from the number of characters
+        encoded.  Similarly, size constraints refer to the number of
+        encoded octets, not the number of characters represented by
+        an encoding."
+    REFERENCE
+       "RFC 3629: UTF-8, a transformation format of ISO 10646"
+    SYNTAX     OCTET STRING
+
+-- object definitions
+
+syslogMsgNotifications OBJECT IDENTIFIER ::= { syslogMsgMib 0 }
+syslogMsgObjects       OBJECT IDENTIFIER ::= { syslogMsgMib 1 }
+syslogMsgConformance   OBJECT IDENTIFIER ::= { syslogMsgMib 2 }
+
+syslogMsgControl       OBJECT IDENTIFIER ::= { syslogMsgObjects 1 }
+
+syslogMsgTableMaxSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "The maximum number of SYSLOG messages that may be held in
+        syslogMsgTable.  A particular setting does not guarantee that
+        there is sufficient memory available for the maximum number
+        of table entries indicated by this object.  A value of 0 means
+        no fixed limit.
+
+        If an application reduces the limit while there are SYSLOG
+        messages in the syslogMsgTable, the SYSLOG messages that are
+        in the syslogMsgTable for the longest time MUST be discarded
+        to bring the table down to the new limit.
+
+        The value of this object should be kept in nonvolatile
+        memory."
+    DEFVAL      { 0 }
+    ::= { syslogMsgControl 1 }
+
+syslogMsgEnableNotifications OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+       "Indicates whether syslogMsgNotification notifications are
+        generated.
+
+        The value of this object should be kept in nonvolatile
+        memory."
+    DEFVAL      { false }
+    ::= { syslogMsgControl 2 }
+
+syslogMsgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SyslogMsgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A table containing recent SYSLOG messages.  The size of the
+        table is controlled by the syslogMsgTableMaxSize object."
+    ::= { syslogMsgObjects 2 }
+
+syslogMsgEntry OBJECT-TYPE
+    SYNTAX      SyslogMsgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "An entry of the syslogMsgTable."
+    INDEX { syslogMsgIndex }
+    ::= { syslogMsgTable 1 }
+
+SyslogMsgEntry ::= SEQUENCE {
+    syslogMsgIndex      Unsigned32,
+    syslogMsgFacility   SyslogFacility,
+    syslogMsgSeverity   SyslogSeverity,
+    syslogMsgVersion    Unsigned32,
+    syslogMsgTimeStamp  SyslogTimeStamp,
+    syslogMsgHostName   DisplayString,
+    syslogMsgAppName    DisplayString,
+    syslogMsgProcID     DisplayString,
+    syslogMsgMsgID      DisplayString,
+    syslogMsgSDParams   Unsigned32,
+    syslogMsgMsg        OCTET STRING
+}
+
+syslogMsgIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A monotonically increasing number used to identify entries in
+        the syslogMsgTable.  When syslogMsgIndex reaches the maximum
+        value (4294967295), the value wraps back to 1.
+
+        Applications periodically polling the syslogMsgTable for new
+        entries should take into account that a complete rollover of
+        syslogMsgIndex will happen if more than 4294967294 messages
+        are received during a poll interval."
+    ::= { syslogMsgEntry 1 }
+
+syslogMsgFacility OBJECT-TYPE
+    SYNTAX      SyslogFacility
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The facility of the SYSLOG message."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.1)
+        RFC 5427: Textual Conventions for Syslog Management"
+    ::= { syslogMsgEntry 2 }
+
+syslogMsgSeverity OBJECT-TYPE
+    SYNTAX      SyslogSeverity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The severity of the SYSLOG message"
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.1)
+        RFC 5427: Textual Conventions for Syslog Management"
+    ::= { syslogMsgEntry 3 }
+
+syslogMsgVersion OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..999)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The version of the SYSLOG message.  A value of 0 indicates
+        that the version is unknown."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.2)"
+    ::= { syslogMsgEntry 4 }
+
+syslogMsgTimeStamp OBJECT-TYPE
+    SYNTAX      SyslogTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The timestamp of the SYSLOG message.  A zero-length
+        string is returned if the timestamp is unknown."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.3)"
+    ::= { syslogMsgEntry 5 }
+
+syslogMsgHostName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The hostname and the (optional) domain name of the SYSLOG
+        message.  A zero-length string indicates an unknown hostname.
+        The SYSLOG protocol specification constrains this string to
+        printable US-ASCII code points."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.4)"
+    ::= { syslogMsgEntry 6 }
+
+syslogMsgAppName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..48))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The app-name of the SYSLOG message.  A zero-length string
+        indicates an unknown app-name.  The SYSLOG protocol
+        specification constrains this string to printable US-ASCII
+        code points."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.5)"
+    ::= { syslogMsgEntry 7 }
+
+syslogMsgProcID OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..128))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The procid of the SYSLOG message.  A zero-length string
+        indicates an unknown procid.  The SYSLOG protocol
+        specification constrains this string to printable
+        US-ASCII code points."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.6)"
+    ::= { syslogMsgEntry 8 }
+
+syslogMsgMsgID OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The msgid of the SYSLOG message.  A zero-length string
+        indicates an unknown msgid.  The SYSLOG protocol specification
+        constrains this string to printable US-ASCII code points."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.2.7)"
+    ::= { syslogMsgEntry 9 }
+
+syslogMsgSDParams OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of structured data element parameters
+        carried in the SYSLOG message.  This number effectively
+        indicates the number of entries in the syslogMsgSDTable.
+        It can be used, for example, by a notification receiver
+        to determine whether a notification carried all
+        structured data element parameters of a SYSLOG message."
+    ::= { syslogMsgEntry 10 }
+
+syslogMsgMsg OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The message part of the SYSLOG message.  The syntax does not
+        impose a size restriction.  Implementations of this MIB module
+        may truncate the message part of the SYSLOG message such that
+        it fits into the size constraints imposed by the implementation
+        environment.  Such truncations can also happen elsewhere in the
+        SYSLOG forwarding chain.
+
+        If the first octets contain the value 'EFBBBF'h, then the rest
+        of the message is a UTF-8 string.  Since SYSLOG messages may be
+        truncated at arbitrary octet boundaries during forwarding, the
+        message may contain invalid UTF-8 encodings at the end."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Sections 6.1 and 6.4)"
+    ::= { syslogMsgEntry 11 }
+
+syslogMsgSDTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SyslogMsgSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "A table containing structured data elements of SYSLOG
+        messages."
+    ::= { syslogMsgObjects 3 }
+
+syslogMsgSDEntry OBJECT-TYPE
+    SYNTAX      SyslogMsgSDEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "An entry of the syslogMsgSDTable."
+    INDEX { syslogMsgIndex, syslogMsgSDParamIndex,
+            syslogMsgSDID, syslogMsgSDParamName }
+    ::= { syslogMsgSDTable 1 }
+
+SyslogMsgSDEntry ::= SEQUENCE {
+    syslogMsgSDParamIndex  Unsigned32,
+    syslogMsgSDID          DisplayString,
+    syslogMsgSDParamName   DisplayString,
+    syslogMsgSDParamValue  SyslogParamValueString
+}
+
+syslogMsgSDParamIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This object indexes the structured data element parameters
+        contained in a SYSLOG message.  The first structured data
+        element parameter has the index value 1, and subsequent
+        parameters are indexed by incrementing the index of the
+        previous parameter.  The index increases across structured
+        data element boundaries so that the value reflects the
+        position of a structured data element parameter in a
+        SYSLOG message."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.3.3)"
+    ::= { syslogMsgSDEntry 1 }
+
+syslogMsgSDID OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "The name (SD-ID) of a structured data element.  The SYSLOG
+        protocol specification constrains this string to printable
+        US-ASCII code points."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.3.2)"
+    ::= { syslogMsgSDEntry 2 }
+
+syslogMsgSDParamName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "The name of a parameter of the structured data element.  The
+        SYSLOG protocol specification constrains this string to
+        printable US-ASCII code points."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.3.3)"
+    ::= { syslogMsgSDEntry 3 }
+
+syslogMsgSDParamValue OBJECT-TYPE
+    SYNTAX      SyslogParamValueString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The value of the parameter of a SYSLOG message identified by
+        the index of this table.  The value is stored in the unescaped
+        format."
+    REFERENCE
+       "RFC 5424: The Syslog Protocol (Section 6.3.3)"
+    ::= { syslogMsgSDEntry 4 }
+
+-- notification definitions
+
+syslogMsgNotification NOTIFICATION-TYPE
+    OBJECTS     { syslogMsgFacility, syslogMsgSeverity,
+                  syslogMsgVersion, syslogMsgTimeStamp,
+                  syslogMsgHostName, syslogMsgAppName,
+                  syslogMsgProcID, syslogMsgMsgID,
+                  syslogMsgSDParams, syslogMsgMsg }
+    STATUS      current
+    DESCRIPTION
+       "The syslogMsgNotification is generated when a new SYSLOG
+        message is received and the value of
+        syslogMsgGenerateNotifications is true.
+
+        Implementations may add syslogMsgSDParamValue objects as long
+        as the resulting notification fits into the size constraints
+        imposed by the implementation environment and the notification
+        message size constraints imposed by maxMessageSize [RFC3412]
+        and SNMP transport mappings."
+    ::= { syslogMsgNotifications 1 }
+
+-- conformance statements
+
+syslogMsgGroups      OBJECT IDENTIFIER ::= { syslogMsgConformance 1 }
+syslogMsgCompliances OBJECT IDENTIFIER ::= { syslogMsgConformance 2 }
+
+syslogMsgFullCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for implementations of the
+        SYSLOG-MSG-MIB."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+        syslogMsgGroup,
+        syslogMsgSDGroup,
+        syslogMsgControlGroup,
+        syslogMsgNotificationGroup
+    }
+    ::= { syslogMsgCompliances 1 }
+
+syslogMsgReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for implementations of the
+        SYSLOG-MSG-MIB that do not support read-write access."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+        syslogMsgGroup,
+        syslogMsgSDGroup,
+        syslogMsgControlGroup,
+        syslogMsgNotificationGroup
+    }
+    OBJECT syslogMsgTableMaxSize
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "Write access is not required."
+    OBJECT syslogMsgEnableNotifications
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "Write access is not required."
+    ::= { syslogMsgCompliances 2 }
+
+syslogMsgNotificationCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for implementations of the
+        SYSLOG-MSG-MIB that do only generate notifications and do not
+        provide a table to allow read access to SYSLOG message
+        details."
+    MODULE      -- this module
+    MANDATORY-GROUPS {
+
+        syslogMsgGroup,
+        syslogMsgSDGroup,
+        syslogMsgNotificationGroup
+    }
+    OBJECT      syslogMsgFacility
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+        "Read access is not required."
+    OBJECT      syslogMsgSeverity
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgVersion
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgTimeStamp
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgHostName
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgAppName
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgProcID
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgMsgID
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgSDParams
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgMsg
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    OBJECT      syslogMsgSDParamValue
+    MIN-ACCESS  accessible-for-notify
+    DESCRIPTION
+       "Read access is not required."
+    ::= { syslogMsgCompliances 3 }
+
+syslogMsgNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        syslogMsgNotification
+    }
+    STATUS      current
+    DESCRIPTION
+       "The notifications emitted by this MIB module."
+    ::= { syslogMsgGroups 1 }
+
+syslogMsgGroup OBJECT-GROUP
+    OBJECTS {
+        -- syslogMsgIndex,
+        syslogMsgFacility,
+        syslogMsgSeverity,
+        syslogMsgVersion,
+        syslogMsgTimeStamp,
+        syslogMsgHostName,
+        syslogMsgAppName,
+        syslogMsgProcID,
+        syslogMsgMsgID,
+        syslogMsgSDParams,
+        syslogMsgMsg
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects representing a SYSLOG message,
+        excluding structured data elements."
+    ::= { syslogMsgGroups 2 }
+
+syslogMsgSDGroup OBJECT-GROUP
+    OBJECTS {
+        -- syslogMsgSDParamIndex,
+        -- syslogMsgSDID,
+        -- syslogMsgSDParamName,
+        syslogMsgSDParamValue
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects representing the structured data
+        elements of a SYSLOG message."
+    ::= { syslogMsgGroups 3 }
+
+syslogMsgControlGroup OBJECT-GROUP
+    OBJECTS {
+        syslogMsgTableMaxSize,
+        syslogMsgEnableNotifications
+
+    }
+    STATUS      current
+    DESCRIPTION
+       "A collection of control objects to control the size of the
+        syslogMsgTable and to enable/disable notifications."
+    ::= { syslogMsgGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/SYSLOG-TC-MIB.mib b/snmp_builder/mibs/SYSLOG-TC-MIB.mib
new file mode 100644
index 0000000..dd4d726
--- /dev/null
+++ b/snmp_builder/mibs/SYSLOG-TC-MIB.mib
@@ -0,0 +1,202 @@
+SYSLOG-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2
+              FROM SNMPv2-SMI        -- [RFC2578]
+    TEXTUAL-CONVENTION
+              FROM SNMPv2-TC;        -- [RFC2579]
+
+syslogTCMIB  MODULE-IDENTITY
+    LAST-UPDATED "200903300000Z"     --  30 March 2009
+    ORGANIZATION "IETF Syslog Working Group"
+    CONTACT-INFO
+    "                      Glenn Mansfield Keeni
+                   Postal: Cyber Solutions Inc.
+                           6-6-3, Minami Yoshinari
+                           Aoba-ku, Sendai, Japan 989-3204.
+                      Tel: +81-22-303-4012
+                      Fax: +81-22-303-4015
+                    EMail: glenn@cysols.com
+
+      Support Group EMail: syslog@ietf.org
+      "
+    DESCRIPTION
+        "The MIB module containing textual conventions for syslog
+         messages.
+
+         Copyright (c) 2009 IETF Trust and the persons
+         identified as authors of the code.  All rights reserved.
+
+         Redistribution and use in source and binary forms, with or
+         without modification, are permitted provided that the
+         following conditions are met:
+
+         - Redistributions of source code must retain the above
+           copyright notice, this list of conditions and the
+           following disclaimer.
+
+         - Redistributions in binary form must reproduce the above
+           copyright notice, this list of conditions and the
+           following disclaimer in the documentation and/or other
+           materials provided with the distribution.
+
+         - Neither the name of Internet Society, IETF or IETF
+           Trust, nor the names of specific contributors, may be
+           used to endorse or promote products derived from this
+           software without specific prior written permission.
+
+         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+         CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
+         WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+         WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+         PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT
+         OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+         INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+         (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+         GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+         BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+         LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+         (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+         OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+         POSSIBILITY OF SUCH DAMAGE.
+
+         This version of this MIB module is part of RFC 5427;
+         see the RFC itself for full legal notices.
+        "
+
+    REVISION "200903300000Z"     --  30 March 2009
+    DESCRIPTION
+        "The initial version, published as RFC 5427."
+    ::= { mib-2 173 }
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+SyslogFacility  ::=  TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "This textual convention enumerates the Facilities that
+         originate syslog messages.
+
+         The Facilities of syslog messages are numerically coded
+         with decimal values.  For interoperability and backwards-
+         compatibility reasons, this document specifies a
+         normative mapping between a label, which represents a
+         Facility, and the corresponding numeric value.  This label
+         could be used in, for example, SNMP Manager user
+         interfaces.
+
+         The label itself is often semantically meaningless
+         because it is impractical to attempt to enumerate all
+         possible Facilities, and many daemons and processes do
+         not have an explicitly assigned Facility code or label.
+         For example, there is no Facility label corresponding to
+         an HTTP service.  An HTTP service implementation might log
+         messages as coming from, for example, 'local7' or 'uucp'.
+         This is typical current practice, and originators, relays,
+         and collectors can be configured to properly handle this
+         situation.  For improved accuracy, an application can also
+         include an APP-NAME structured data element.
+
+         Note that operating system mechanisms for configuring
+         syslog, such as syslog.conf, have not yet been standardized
+         and might use different sets of Facility labels and/or
+         mapping between Facility labels and Facility codes than the
+         MIB.
+
+         In particular, the labels corresponding to Facility codes 4,
+         10, 13, and 14, and the code corresponding to the Facility
+         label 'cron' are known to vary across different operating
+         systems.  To distinguish between the labels corresponding
+         to Facility codes 9 and 15, a label of 'cron2' is assigned
+         to the Facility code 15.  This list is not intended to be
+         exhaustive; other differences might exist, and new
+         differences might be introduced in the future.
+
+         The mapping specified here MUST be used in a MIB network
+         management interface, even though a particular syslog
+         implementation might use a different mapping in a
+         different network management interface.
+        "
+    REFERENCE "The Syslog Protocol (RFC5424): Table 1"
+    SYNTAX  INTEGER
+         {
+
+           kern            (0), -- kernel messages
+           user            (1), -- user-level messages
+           mail            (2), -- mail system messages
+           daemon          (3), -- system daemons' messages
+           auth            (4), -- authorization messages
+           syslog          (5), -- messages generated internally by
+                                -- syslogd
+           lpr             (6), -- line printer subsystem messages
+           news            (7), -- network news subsystem messages
+           uucp            (8), -- UUCP subsystem messages
+           cron            (9), -- clock daemon messages
+           authpriv        (10),-- security/authorization messages
+
+           ftp             (11),-- ftp daemon messages
+           ntp             (12),-- NTP subsystem messages
+           audit           (13),-- audit messages
+           console         (14),-- console messages
+           cron2           (15),-- clock daemon messages
+           local0          (16),
+           local1          (17),
+           local2          (18),
+           local3          (19),
+           local4          (20),
+           local5          (21),
+           local6          (22),
+           local7          (23)
+         }
+
+SyslogSeverity  ::=  TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "This textual convention enumerates the Severity levels
+         of syslog messages.
+
+         The Severity levels of syslog messages are numerically
+         coded with decimal values.  For interoperability and
+         backwards-compatibility reasons, this document specifies
+         a normative mapping between a label, which represents a
+         Severity level, and the corresponding numeric value.
+         This label could be used in, for example, SNMP Manager
+         user interfaces.
+
+         The label itself is often semantically meaningless
+         because it is impractical to attempt to strictly define
+         the criteria for each Severity level, and the criteria
+         that is used by syslog originators is, and has
+         historically been, implementation-dependent.
+
+         Note that operating system mechanisms for configuring
+         syslog, such as syslog.conf, have not yet been standardized
+         and might use different sets of Severity labels and/or
+         mapping between Severity labels and Severity codes than the
+         MIB.
+
+         For example, the foobar application might log messages as
+         'crit' based on some subjective criteria.  Yet the operator
+         can configure syslog to forward these messages, even though
+         the criteria for 'crit' may differ from one originator to
+         another.  This is typical current practice, and originators,
+         relays, and collectors can be configured to properly handle
+         this situation.
+        "
+    REFERENCE "The Syslog Protocol (RFC5424): Table 2"
+    SYNTAX  INTEGER
+         {
+           emerg           (0),  -- emergency; system is unusable
+           alert           (1),  -- action must be taken immediately
+           crit            (2),  -- critical condition
+           err             (3),  -- error condition
+           warning         (4),  -- warning condition
+           notice          (5),  -- normal but significant condition
+           info            (6),  -- informational message
+           debug           (7)   -- debug-level messages
+
+         }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-FABRIC-ADDR-MGR-MIB.mib b/snmp_builder/mibs/T11-FC-FABRIC-ADDR-MGR-MIB.mib
new file mode 100644
index 0000000..dab6622
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-FABRIC-ADDR-MGR-MIB.mib
@@ -0,0 +1,1241 @@
+T11-FC-FABRIC-ADDR-MGR-MIB  DEFINITIONS ::= BEGIN
+
+-- the Fibre Channel Fabric Address Manager MIB
+--
+-- for management of the functionality, in Fibre Channel switches,
+-- which is used to manage fabric configuration, domains, and
+-- addresses within a domain.
+--
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, Unsigned32,
+    Counter32, Gauge32, mib-2          FROM SNMPv2-SMI   -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                 FROM SNMPv2-CONF  -- [RFC2580]
+    TEXTUAL-CONVENTION, TruthValue,
+    RowStatus                          FROM SNMPv2-TC    -- [RFC2579]
+    ifIndex                            FROM IF-MIB       -- [IF-MIB]
+    fcmInstanceIndex, fcmSwitchIndex,
+    FcDomainIdOrZero, FcNameIdOrZero   FROM FC-MGMT-MIB  -- [FC-MGMT]
+    T11FabricIndex                     FROM T11-TC-MIB;
+
+t11FcFabricAddrMgrMIB MODULE-IDENTITY
+
+    LAST-UPDATED "200603020000Z"
+    ORGANIZATION "T11"
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Phone: +1 408 853-9172
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA USA 95134
+                  Phone: +1 408-526-5260
+                  EMail: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for the Fabric Address management
+           functionality defined by the Fibre Channel standards.  For
+           the purposes of this MIB, Fabric Address Manager refers to
+           the functionality of acquiring DomainID(s) as specified in
+           FC-SW-3, and managing Fibre Channel Identifiers as specified
+           in FC-FS.  An instance of 'Fabric Address Manager' software
+           functionality executes in the Principal Switch, and in each
+           other switch.
+
+           After an agent reboot, the values of read-write objects
+           defined in this MIB module are implementation-dependent.
+
+           Copyright (C) The Internet Society (2006).  This version of
+           this MIB module is part of RFC 4439;  see the RFC itself for
+           full legal notices."
+    REVISION    "200603020000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4439."
+    ::= { mib-2 137 }
+
+t11FamNotifications   OBJECT IDENTIFIER ::= { t11FcFabricAddrMgrMIB 0 }
+t11FamMIBObjects      OBJECT IDENTIFIER ::= { t11FcFabricAddrMgrMIB 1 }
+t11FamMIBConformance  OBJECT IDENTIFIER ::= { t11FcFabricAddrMgrMIB 2 }
+t11FamConfiguration   OBJECT IDENTIFIER ::= { t11FamMIBObjects 1 }
+t11FamInfo            OBJECT IDENTIFIER ::= { t11FamMIBObjects 2 }
+t11FamNotifyControl   OBJECT IDENTIFIER ::= { t11FamMIBObjects 3 }
+
+-- Textual Conventions
+
+T11FamDomainPriority ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS    current
+    DESCRIPTION
+           "Priority of a switch.
+
+           The Principal Switch selection is influenced by the
+           priority of the switches.
+
+           Some values of importance are:
+
+           1   : The highest priority in Principal Switch
+                 selection, which is used by the administrator
+                 to establish which switch becomes the Principal
+                 Switch.
+           255 : Indicates that the switch is not capable of
+                 acting as a Principal Switch."
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                 ANSI INCITS 384-2004, section 6.1.5."
+    SYNTAX    Unsigned32 (1..255)
+
+T11FamDomainInterfaceRole ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+           "The 'designated' state/role of the Inter-Switch Link (ISL)
+           to which an interface connects, or (if not connected)
+           the state of the interface:
+
+           nonPrincipal (1)       - non-Principal ISL
+           principalUpstream (2)  - Upstream Principal ISL
+           principalDownsteam (3) - Downstream Principal ISL
+           isolated (4)           - interface is isolated
+           down (5)               - interface is down
+           unknown (6)            - state/role is unknown
+           "
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                 ANSI INCITS 384-2004, Sections 3.1, 5.7,
+                 and Figure 9."
+    SYNTAX    INTEGER {
+                       nonPrincipal (1),
+                       principalUpstream (2),
+                       principalDownsteam (3),
+                       isolated (4),
+                       down (5),
+                       unknown (6)
+              }
+
+T11FamState ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+           "The state of the Fabric Address Manager, as described in
+           Table 86 and Figure 15 of FC-SW-3.
+
+           - 'other' represents a switch that is in a state not
+             represented by any of the below enumerations.
+
+           - 'starting' represents a switch engaged in the process
+             represented by the first row in Table 86.
+
+           - 'unconfigured' represents a switch that requires
+             operator input before it can begin the process
+             represented by the first row in Table 86.
+
+           - 'principalSwitchSelection' represents a switch engaged
+             in the process represented by the second row in
+             Table 86, but not in states F0 or F1 of Figure 15.
+
+           - 'domainIdDistribution' represents a switch engaged in
+             the process represented by the third row in Table 86.
+
+           - 'buildFabricPhase' represents a switch that is in
+             state F0 of Figure 15.
+
+           - 'reconfigureFabricPhase' represents a switch that is
+             in state F1 of Figure 15.
+
+           - 'stable' represents a switch that has successfully
+             completed the process represented by the third row in
+             Table 86 and has at least one E_Port.
+
+           - 'stableWithNoEports' represents a switch that has
+             successfully completed the process represented by the
+             third row in Table 86 but has no E_Ports.
+
+           - 'noDomains' represents a switch that has completed
+             the process represented by the third row in Table 86
+             but failed to obtain a Domain_ID.
+
+           - 'disabled' represents any situation in which the
+             corresponding instance of t11FamEnable has the value
+             'false'.
+
+           - 'unknown' represents a switch that is confused about
+             what state it is in."
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                 ANSI INCITS 384-2004, Table 86 and Figure 15."
+    SYNTAX    INTEGER {
+
+                       other(1),
+                       starting(2),
+                       unconfigured(3),
+                       principalSwitchSelection(4),
+                       domainIdDistribution(5),
+                       buildFabricPhase(6),
+                       reconfigureFabricPhase(7),
+                       stable(8),
+                       stableWithNoEports(9),
+                       noDomains(10),
+                       disabled(11),
+                       unknown(12)
+              }
+
+--
+-- t11FamTable
+--
+
+t11FamTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF T11FamEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains Fabric Address Manager related
+           parameters that are able to be configured and monitored
+           in a Fibre Channel switch.  For each of the switches
+           (identified by fcmSwitchIndex) managed by a Fibre Channel
+           management instance (identified by fcmInstanceIndex),
+           there is any entry for each Fabric known to that switch.
+           Entries are implicitly created/removed if and when
+           additional Fabrics are created/deleted."
+    ::= { t11FamConfiguration 1 }
+
+t11FamEntry OBJECT-TYPE
+    SYNTAX     T11FamEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry provides information on the local Fabric Address
+           Manager functionality for a Fabric known to a
+           particular switch."
+    INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FamFabricIndex }
+    ::= { t11FamTable 1 }
+
+T11FamEntry ::= SEQUENCE {
+    t11FamFabricIndex                       T11FabricIndex,
+    t11FamConfigDomainId                    FcDomainIdOrZero,
+    t11FamConfigDomainIdType                INTEGER,
+    t11FamAutoReconfigure                   TruthValue,
+    t11FamContiguousAllocation              TruthValue,
+    t11FamPriority                          T11FamDomainPriority,
+    t11FamPrincipalSwitchWwn                FcNameIdOrZero,
+    t11FamLocalSwitchWwn                    FcNameIdOrZero,
+    t11FamAssignedAreaIdList                OCTET STRING,
+    t11FamGrantedFcIds                      Counter32,
+    t11FamRecoveredFcIds                    Counter32,
+    t11FamFreeFcIds                         Gauge32,
+    t11FamAssignedFcIds                     Gauge32,
+    t11FamAvailableFcIds                    Gauge32,
+    t11FamRunningPriority                   T11FamDomainPriority,
+    t11FamPrincSwRunningPriority            T11FamDomainPriority,
+    t11FamState                             T11FamState,
+    t11FamLocalPrincipalSwitchSlctns        Counter32,
+    t11FamPrincipalSwitchSelections         Counter32,
+    t11FamBuildFabrics                      Counter32,
+    t11FamFabricReconfigures                Counter32,
+    t11FamDomainId                          FcDomainIdOrZero,
+    t11FamSticky                            TruthValue,
+    t11FamRestart                           INTEGER,
+    t11FamRcFabricNotifyEnable              TruthValue,
+    t11FamEnable                            TruthValue,
+    t11FamFabricName                        FcNameIdOrZero
+}
+
+t11FamFabricIndex OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "A unique index value that uniquely identifies a
+           particular Fabric known to a particular switch.
+
+           In a Fabric conformant to FC-SW-3, only a single Fabric
+           can operate within a physical infrastructure, and thus,
+           the value of this Fabric Index will always be 1.
+
+           However, the current standard, FC-SW-4, defines
+           how multiple Fabrics, each with its own management
+           instrumentation, could operate within one (or more)
+           physical infrastructures.  When such multiple Fabrics
+           are in use, this index value is used to uniquely
+           identify a particular Fabric within a physical
+           infrastructure."
+    ::= { t11FamEntry 1 }
+
+t11FamConfigDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "The configured Domain_ID of the particular switch on this
+           Fabric, or zero if no Domain_ID has been configured.
+           The meaning of this object depends on
+           t11FamConfigDomainIdType object.
+
+           If t11FamConfigDomainIdType is 'preferred', then the
+           configured Domain_ID is called the 'preferred Domain_ID'.
+           Valid values are between 0 and 239.  In a situation where
+           this Domain_ID cannot be assigned, any other Domain_ID
+           will be acceptable.  A value of zero means any Domain_ID.
+
+           If t11FamConfigDomainIdType is 'insistent', then the
+           configured Domain_ID is called the 'insistent Domain_ID' and
+           valid values are between 1 and 239.  In a situation where
+           this Domain_ID cannot be assigned, no other Domain_ID is
+           acceptable.
+
+           In both of the above cases, the switch sends an RDI (Request
+           Domain_ID) to request this Domain_ID to the Principal
+           Switch.  If no Domain_ID is able to be granted in the case
+           of 'preferred', or if an 'insistent' Domain_ID is configured
+           but not able to be granted, then it is an error condition.
+           When this error occurs, the switch will continue as if it
+           receives a SW_RJT with a reason/explanation of 'Unable to
+           perform command request'/'Domain_ID not available'.  That
+           is, its E_Ports on that Fabric will be isolated and the
+           administrator informed via a 't11FamDomainIdNotAssigned'
+           notification.
+
+           If t11FamConfigDomainIdType is 'static', then the configured
+           Domain_ID is called the 'static Domain_ID' and valid values
+           are between 1 and 239.  In this situation, there is no
+           Principal Switch in the Fabric and the Domain_ID is simply
+           assigned by configuration, together with the Fabric_Name.
+           A switch configured with a static Domain_ID, on receiving
+           an EFP, BF, RCF, DIA, or RDI SW_ILS, shall reply with an
+           SW_RJT having Reason Code Explanation 'E_Port is Isolated'
+           and shall isolate the receiving E_Port.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    REFERENCE   "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+                 ANSI INCITS 418-2006, section 7."
+    DEFVAL      { 0 }
+    ::= { t11FamEntry 2 }
+
+t11FamConfigDomainIdType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                       preferred(1),
+                       insistent(2),
+                       static(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "Type of configured Domain_ID contained in
+           t11FamConfigDomainId.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    DEFVAL  { preferred }
+    ::= { t11FamEntry 3 }
+
+t11FamAutoReconfigure OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "This object determines how a particular switch
+           responds to certain error conditions.
+
+           The condition that might cause these errors is
+           the merging of two disjoint Fabrics that have
+           overlapping Domain_ID lists.
+
+           If value of this object is 'true', the switch will
+           send an RCF (ReConfigureFabric) to rebuild the
+           Fabric.
+
+           If 'false', the switch will isolate the E_Ports on
+           which the errors happened.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                   December 2003, sections 6.1.12 & 7.3.
+                Fibre Channel - Methodologies for Interconnects
+                   (FC-MI), INCITS TR-30-2002, table 14, note g."
+    DEFVAL  { false }
+    ::= { t11FamEntry 4 }
+
+t11FamContiguousAllocation OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "Determines how a particular switch behaves when elected as
+           the Principal Switch.
+
+           If true, the switch will only accept RDIs with a contiguous
+           allocation; specifically, it will reject RDIs with
+           non-contiguous Domain_IDs, and if an RDI for a contiguous
+           Domain_ID is not able to be fulfilled, it will try to
+           replace all the Domain_IDs in the list with contiguous
+           Domain_IDs, and if that fails, the RDI will be rejected.
+
+           If false, then the switch acts normally in granting
+           the Domain_IDs even if they are not contiguous.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    ::= { t11FamEntry 5 }
+
+t11FamPriority  OBJECT-TYPE
+    SYNTAX     T11FamDomainPriority
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The initial or configured priority of a particular switch
+           to be used in Principal Switch selection process.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    ::= { t11FamEntry 6 }
+
+t11FamPrincipalSwitchWwn OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The WWN of the Principal Switch on this Fabric,
+           or zero-length string if the identity of the principal
+           switch is unknown."
+    DEFVAL  { ''H }
+    ::= { t11FamEntry 7 }
+
+t11FamLocalSwitchWwn OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The WWN of the particular switch on this Fabric."
+    ::= { t11FamEntry 8 }
+
+t11FamAssignedAreaIdList    OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..256))
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The list of (zero or more) Area_IDs that have been
+           assigned by a particular switch in this Fabric, formatted
+           as an array of octets in ascending order.
+
+           Each octet represents one Area_ID.  So, the list containing
+           Area_IDs 23, 45, 235, and 56 would be formatted as the
+           4-octet string x'172d38eb'.
+
+           A particular area's Area_ID is used as the index into the
+           t11FamAreaTable to get the statistics on that area."
+    ::= { t11FamEntry 9 }
+
+t11FamGrantedFcIds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The total number of Fibre Channel Address Identifiers
+           granted (for local use, i.e., with a particular switch's
+           Domain_ID) by the Fabric Address Manager on that switch.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11FamEntry 10 }
+
+t11FamRecoveredFcIds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The total number of Fibre Channel Address Identifiers that
+           have been recovered by the Fabric Address Manager on a
+           particular switch since the switch has been initialized.
+           A recovered Fibre Channel Address Identifier is one that is
+           explicitly returned after previously being used.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11FamEntry 11 }
+
+t11FamFreeFcIds OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of Fibre Channel Address Identifiers that are
+           currently unassigned on this Fabric and could be available
+           for assignment either immediately or at some later time.
+
+           The sum of the instances of FreeFcIds and AssignedFcIds
+           corresponding to a particular Fabric is the total number of
+           Fibre Channel Address Identifiers that the local Fabric
+           Address Management is capable of assigning on that Fabric."
+    ::= { t11FamEntry 12 }
+
+t11FamAssignedFcIds OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of Fibre Channel Address Identifiers that are
+           currently assigned on this Fabric.
+
+           The sum of the instances of FreeFcIds and AssignedFcIds
+           corresponding to a particular Fabric is the total number of
+           Fibre Channel Address Identifiers that the local Fabric
+           Address Management is capable of assigning on that Fabric."
+    ::= { t11FamEntry 13 }
+
+t11FamAvailableFcIds OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of Fibre Channel Address Identifiers that are
+           unassigned and currently available for immediate assignment
+           on the Fabric, e.g., with the 'Clean Address' bit set to 1."
+    REFERENCE
+        "Fibre Channel - Framing and Signaling (FC-FS),
+         ANSI INCITS 373-2003, section 15.6.2.4.2."
+    ::= { t11FamEntry 14 }
+
+t11FamRunningPriority OBJECT-TYPE
+    SYNTAX     T11FamDomainPriority
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The running priority of a particular switch on this Fabric.
+           This value is initialized to the value of t11FamPriority,
+           and subsequently altered as specified by the procedures
+           defined in FC-SW-3."
+    ::= { t11FamEntry 15 }
+
+t11FamPrincSwRunningPriority OBJECT-TYPE
+    SYNTAX     T11FamDomainPriority
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The running priority of the Principal Switch on this
+           Fabric."
+    ::= { t11FamEntry 16 }
+
+t11FamState OBJECT-TYPE
+    SYNTAX     T11FamState
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The state of the Fabric Address Manager on a particular
+           switch on this Fabric."
+    ::= { t11FamEntry 17 }
+
+t11FamLocalPrincipalSwitchSlctns OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of times a particular switch became the
+           Principal Switch on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11FamEntry 18 }
+
+t11FamPrincipalSwitchSelections OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of Principal Switch selections on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11FamEntry 19 }
+
+t11FamBuildFabrics OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of non-disruptive fabric reconfigurations (BFs)
+           that have occurred on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11FamEntry 20 }
+
+t11FamFabricReconfigures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of disruptive fabric reconfigurations (RCFs)
+           that have occurred on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11FamEntry 21 }
+
+t11FamDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The Domain_ID of a particular switch on this Fabric or
+           zero if no Domain_ID has been assigned."
+    ::= { t11FamEntry 22 }
+
+t11FamSticky   OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "An indication of whether a particular switch is supporting
+           the concept of Preferred Domain_IDs via a best-effort
+           attempt to re-assign the same Fibre Channel Address
+           Identifier value to a port on the next occasion when a port
+           requests an assignment on this Fabric.
+
+           If the value of this object is 'true', then the switch is
+           maintaining rows in the t11FamFcIdCacheTable for this
+           Fabric."
+    ::= { t11FamEntry 23 }
+
+t11FamRestart  OBJECT-TYPE
+    SYNTAX     INTEGER {
+                       nonDisruptive(1),
+                       disruptive(2),
+                       noOp(3)
+               }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "This object tells the Fabric Address Manager to
+           request a Fabric reconfiguration.
+
+           If this object is set to 'disruptive', then an RCF
+           (ReConfigure Fabric) is generated in the Fabric
+           in order for the Fabric to recover from the errors.
+
+           If this object is set to 'nonDisruptive', then a
+           BF (Build Fabric) is generated in the Fabric.
+
+           No action is taken if this object is set to 'noOp'.
+           The value of the object when read is always 'noOp'.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                 ANSI INCITS 384-2004, section 7.3."
+    ::= { t11FamEntry 24 }
+
+t11FamRcFabricNotifyEnable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An indication of whether or not a particular switch
+           should issue a t11FamFabricChangeNotify notification on
+           sending or receiving ReConfigureFabric (RCF) on a Fabric.
+
+           If the value of the object is 'true', then the
+           notification is generated.  If the value is 'false',
+           notification is not generated.
+
+           If an implementation requires all Fabrics to have the
+           same value, then setting one instance of this object
+           to a new object will result in all corresponding
+           instances being set to that same new value.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    DEFVAL { false }
+    ::= { t11FamEntry 25 }
+
+t11FamEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "Enables the Fabric Address Manager on this switch
+           on this Fabric.
+
+           If enabled on a Fabric, the switch will participate in
+           Principal Switch selection, and Domain_IDs are assigned
+           dynamically.  If disabled, the switch will not participate
+           in Principal Switch selection, and Domain_IDs are
+           assigned statically.  Thus, the corresponding value of
+           t11FamConfigDomainIdType needs to be 'static'.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+  REFERENCE   "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, sections 7.1 and 7.3."
+  DEFVAL  { true }
+  ::= { t11FamEntry 26 }
+
+t11FamFabricName  OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "The WWN that is configured on this switch to be used as
+           the name of this Fabric when the value of t11FamEnable is
+           'false'.
+
+           If the value of t11FamEnable is 'true', this value is not
+           used.
+
+           Fibre Channel requires that:
+               a) all switches in an operational Fabric be
+                  configured with the same Fabric name; and
+               b) each Fabric have a unique Fabric name.
+           If either of these is violated, either by switches within a
+           single Fabric being configured with different Fabric names,
+           or by multiple Fabrics that share management applications
+           or interact in other ways having the same Fabric name,
+           then the behavior of the switches and associated management
+           functions is not specified by Fibre Channel or Internet
+           standards.
+
+           For the persistence of values across reboots, see the
+           MODULE-IDENTITY's DESCRIPTION clause."
+    REFERENCE   "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+                 ANSI INCITS 418-2006, section 7.1."
+    ::= { t11FamEntry 27 }
+
+--
+-- t11FamIfTable - Interface configuration
+--
+
+t11FamIfTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF T11FamIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains those Fabric Address Manager parameters
+           and status values that are per-interface (identified
+           by an ifIndex value), per-Fabric (identified by a
+           t11FamFabricIndex value), and per-switch (identified by
+           values of fcmInstanceIndex and fcmSwitchIndex).
+
+           An entry in this table is automatically created when
+           an E_Port becomes non-isolated on a particular Fabric.
+
+           An entry is deleted automatically from this table if:
+           a) the corresponding interface is no longer an E_Port (e.g.,
+              a G_Port that is dynamically determined to be an F_Port),
+              and all configuration parameter(s) have default values; or
+           b) the interface identified by ifIndex no longer exists
+              (e.g., because a line-card is physically removed); or
+           c) the row in the t11FamTable corresponding the fabric
+              identified by t11FamFabricID no longer exists.
+
+           Creating an entry in this table via t11FamIfRowStatus
+           provides the means to specify non-default parameter value(s)
+           for an interface at a time when the relevant row in this
+           table does not exist, i.e., because the interface is either
+           down or it is not an E_Port."
+    ::= { t11FamConfiguration 2 }
+
+t11FamIfEntry OBJECT-TYPE
+    SYNTAX     T11FamIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing information on the interface
+           configuration on the Fabric identified by
+
+           t11FamFabricIndex."
+    INDEX { fcmInstanceIndex, fcmSwitchIndex,
+            t11FamFabricIndex, ifIndex}
+    ::= { t11FamIfTable 1 }
+
+T11FamIfEntry ::= SEQUENCE {
+    t11FamIfRcfReject    TruthValue,
+    t11FamIfRole         T11FamDomainInterfaceRole,
+    t11FamIfRowStatus    RowStatus
+}
+
+t11FamIfRcfReject    OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS      current
+    DESCRIPTION
+           "This object determines if the incoming ReConfigure
+           Fabric (RCF) messages on this interface on this
+           Fabric is accepted or not.  If this object is 'true', then
+           the incoming RCF is rejected.  If 'false', incoming RCF is
+           accepted.
+
+           Note that this object does not apply to the outgoing
+           RCFs generated by this interface.
+
+           Implementations that support write-access to this object
+           can do so under whatever conditions they choose."
+    DEFVAL {false}
+    ::= { t11FamIfEntry 1 }
+
+t11FamIfRole    OBJECT-TYPE
+    SYNTAX     T11FamDomainInterfaceRole
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The role of this interface."
+    ::= { t11FamIfEntry 2 }
+
+t11FamIfRowStatus    OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this row."
+    ::= { t11FamIfEntry 3 }
+
+--
+
+-- t11FamAreaTable
+--
+
+t11FamAreaTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF T11FamAreaEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains area assignments per-Fabric by a
+           switch's Fabric Address Manager.  Each octet in
+           t11FamAssignedAreaList is able to be used to index into
+           this table to find information on each area."
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                 ANSI INCITS 384-2004, section 4.8."
+    ::= { t11FamInfo 1 }
+
+t11FamAreaEntry OBJECT-TYPE
+    SYNTAX     T11FamAreaEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry gives information on the Area_ID and all
+           Port_IDs that have been assigned within an area for
+           the Fabric identified by t11FamFabricIndex, by the
+           Fabric Address Manager in the switch identified by
+           fcmInstanceIndex and fcmSwitchIndex."
+    INDEX { fcmInstanceIndex, fcmSwitchIndex,
+            t11FamFabricIndex, t11FamAreaAreaId}
+    ::= { t11FamAreaTable 1 }
+
+T11FamAreaEntry ::= SEQUENCE {
+    t11FamAreaAreaId                Unsigned32,
+    t11FamAreaAssignedPortIdList    OCTET STRING
+}
+
+t11FamAreaAreaId    OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The Area_ID of this area."
+    ::= { t11FamAreaEntry 1 }
+
+t11FamAreaAssignedPortIdList    OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE(0..256))
+    MAX-ACCESS read-only
+    STATUS      current
+    DESCRIPTION
+           "The list of Port_IDs which have been assigned in
+           this area and Fabric, formatted as an array of
+           octets in ascending order.  There could be zero or more
+           Port_IDs assigned on this area and Fabric.
+
+           Each octet represents one Port_ID.  So, the list containing
+           the Port_IDs 23, 45, 235, and 56 would be formatted as the
+           4-octet string x'172d38eb'."
+    ::= { t11FamAreaEntry 2 }
+
+--
+-- t11FamDatabaseTable
+--
+
+t11FamDatabaseTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF T11FamDatabaseEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains all information known by
+           a switch about all the domains that have been
+           assigned in each Fabric."
+    REFERENCE   "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
+                 ANSI INCITS 384-2004, section 4.8."
+    ::= { t11FamInfo 2 }
+
+t11FamDatabaseEntry OBJECT-TYPE
+    SYNTAX     T11FamDatabaseEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry (conceptual row) in the t11FamDatabaseTable
+           containing information about one Domain_ID in the
+           Fabric identified by t11FamFabricIndex, and known by
+           the switch identified by t11FamFabricIndex and
+           t11FamDatabaseDomainId."
+    INDEX { fcmInstanceIndex, fcmSwitchIndex,
+            t11FamFabricIndex , t11FamDatabaseDomainId}
+    ::= { t11FamDatabaseTable 1 }
+
+T11FamDatabaseEntry ::= SEQUENCE {
+    t11FamDatabaseDomainId              FcDomainIdOrZero,
+    t11FamDatabaseSwitchWwn             FcNameIdOrZero
+}
+
+t11FamDatabaseDomainId  OBJECT-TYPE
+    SYNTAX     FcDomainIdOrZero (1..239)
+    MAX-ACCESS not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The Domain_ID for which this row contains information.
+           The value must be non-zero."
+    ::= { t11FamDatabaseEntry 1 }
+
+t11FamDatabaseSwitchWwn  OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The node name (WWN) of the switch to which the
+            corresponding value of t11FamDatabaseDomainId is currently
+            assigned for the particular Fabric."
+    ::= { t11FamDatabaseEntry 2 }
+
+--
+-- Fibre Channel Address Identifier cache information
+--
+-- The cached information allows the Fabric Address Manager to
+-- implement the concept of a Preferred Domain_ID, whereby after a port
+-- releases a Fibre Channel Address Identifier value, a switch makes an
+-- attempt to re-assign the same Fibre Channel Address Identifier value
+-- on the next occasion when that port requests an assignment.
+--
+
+t11FamMaxFcIdCacheSize  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The maximum number of Fibre Channel Address Identifiers
+           that are able to be cached in the t11FamFcIdCacheTable.
+           If the number is unknown, the value of this object is
+           zero."
+    ::= { t11FamInfo 3 }
+
+--
+-- t11FamFcIdCacheTable
+--
+
+t11FamFcIdCacheTable  OBJECT-TYPE
+    SYNTAX     SEQUENCE OF T11FamFcIdCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains all the Fibre Channel Address
+           Identifiers that have recently been released by the
+           Fabric Address Manager in a switch.  So, it lists
+           all the Fibre Channel Address Identifiers that have valid
+           WWN-to-Fibre Channel Address Identifier mappings and are
+           currently not assigned to any ports.  These Fibre Channel
+           Address Identifiers were assigned to ports but have since
+           been released.  These cached Fibre Channel Address
+           Identifiers contain only Area_ID and Port_ID information.
+           This cache is kept to provide best-effort re-assignment of
+           same Fibre Channel Address Identifiers; i.e., when an
+           Nx_Port asks for a Fibre Channel Address Identifier, soon
+           after releasing one, the same value is re-assigned, if
+           possible."
+    ::= { t11FamInfo 4 }
+
+t11FamFcIdCacheEntry OBJECT-TYPE
+    SYNTAX     T11FamFcIdCacheEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry (conceptual row) in the t11FamFcIdCacheTable
+           containing information about one Fibre Channel Address
+           Identifier that was released from a WWN, corresponding to a
+           range of one or more ports connected to the switch
+           (identified by t11FamFabricIndex and t11FamFcIdCacheWwn) in
+           the Fabric (identified by t11FamFabricIndex).  An entry is
+           created when a Fibre Channel Address Identifier is released
+           by the last port in the range.  The oldest entry is deleted
+           if the number of rows in this table reaches
+           t11FamMaxFcIdCacheSize, and its space is required for a new
+           entry.  An entry is also deleted when its Fibre Channel
+           Address Identifier is assigned to a port."
+    INDEX { fcmInstanceIndex, fcmSwitchIndex,
+            t11FamFabricIndex, t11FamFcIdCacheWwn}
+    ::= { t11FamFcIdCacheTable 1 }
+
+T11FamFcIdCacheEntry ::= SEQUENCE {
+    t11FamFcIdCacheWwn                  FcNameIdOrZero,
+    t11FamFcIdCacheAreaIdPortId         OCTET STRING,
+    t11FamFcIdCachePortIds              Unsigned32
+}
+
+t11FamFcIdCacheWwn  OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero
+    MAX-ACCESS not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The N_Port_Name (WWN) of the port associated with this
+           entry."
+    ::= { t11FamFcIdCacheEntry 1 }
+
+t11FamFcIdCacheAreaIdPortId  OBJECT-TYPE
+    SYNTAX     OCTET STRING (SIZE (2))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The combination of this object and t11FamFcIdCachePortIds
+           represent one range of Fibre Channel Address Identifiers,
+           which were assigned and later released.  This object
+           contains the Area_ID and Port_ID of the first Fibre
+           Channel Address Identifier in the range.
+
+           Note that this object is only 2 bytes."
+    ::= { t11FamFcIdCacheEntry 2 }
+
+t11FamFcIdCachePortIds  OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The combination of t11FamFcIdCacheAreaIdPortId and this
+           object represent one range of Fibre Channel Address
+           Identifiers, which were assigned and later released.  This
+           object contains the number of (consecutive) Fibre Channel
+           Address Identifiers in the range."
+    ::= { t11FamFcIdCacheEntry 3 }
+
+-- Objects for use in notifications
+
+t11FamNotifyFabricIndex OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+           "A unique index value that identifies a particular
+           Fabric for which a particular notification is generated.
+
+           In a Fabric conformant to SW-3, only a single Fabric
+           can operate within a physical infrastructure, and thus,
+           the value of this Fabric Index will always be 1.
+
+           However, the current standard, FC-SW-4, defines
+           how multiple Fabrics, each with its own management
+
+           instrumentation, could operate within one (or more)
+           physical infrastructures.  In order to accommodate this
+           scenario, this index value is used to uniquely identify a
+           particular Fabric within a physical infrastructure."
+    ::= { t11FamNotifyControl 1 }
+
+-- Notifications
+
+t11FamDomainIdNotAssignedNotify NOTIFICATION-TYPE
+    OBJECTS     { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
+    STATUS      current
+    DESCRIPTION
+           "This notification indicates that a Domain_ID has not
+           been configured or assigned for a particular Fabric,
+           identified by t11FamNotifyFabricIndex, on a particular
+           switch identified by t11FamLocalSwitchWwn.  This could
+           happen under the following conditions, and results in the
+           switch isolating E_Ports on the Fabric:
+
+            - if the switch's request for a configured static
+              Domain_ID is rejected or no other Domain_ID is
+              assigned, then the E_Ports are isolated."
+    ::= { t11FamNotifications 1 }
+
+t11FamNewPrincipalSwitchNotify NOTIFICATION-TYPE
+    OBJECTS     { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
+    STATUS      current
+    DESCRIPTION
+           "This notification indicates that a particular switch,
+           identified by t11FamLocalSwitchWwn, has become the new
+           Principal Switch on the Fabric identified by
+           t11FamNotifyFabricIndex.
+
+           This notification is sent soon after its election as
+           the new Principal Switch, i.e., upon expiration of a
+           Principal Switch selection timer that is equal to
+           twice the Fabric Stability Timeout value (F_S_TOV)."
+    ::= { t11FamNotifications 2 }
+
+t11FamFabricChangeNotify NOTIFICATION-TYPE
+    OBJECTS     { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
+    STATUS      current
+    DESCRIPTION
+           "This notification is sent whenever a particular switch,
+           identified by t11FamLocalSwitchWwn, sends or
+           receives a Build Fabric (BF) or a ReConfigure Fabric
+           (RCF) message on the Fabric identified by
+
+           t11FamNotifyFabricIndex.
+
+           This notification is not sent if a
+           't11FamNewPrincipalSwitchNotify' notification is sent
+           for the same event."
+    ::= { t11FamNotifications 3 }
+
+--
+-- Conformance
+--
+
+t11FamMIBCompliances OBJECT IDENTIFIER ::= { t11FamMIBConformance 1 }
+t11FamMIBGroups OBJECT IDENTIFIER ::= { t11FamMIBConformance 2 }
+
+t11FamMIBCompliance MODULE-COMPLIANCE
+    STATUS   current
+    DESCRIPTION
+           "The compliance statement for Fibre Channel switches
+           that implement Fabric Address Manager functionality."
+    MODULE
+    MANDATORY-GROUPS { t11FamGroup,
+                       t11FamDatabaseGroup,
+                       t11FamAreaGroup,
+                       t11FamNotificationGroup
+                     }
+
+      OBJECT t11FamConfigDomainId
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamConfigDomainIdType
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamAutoReconfigure
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamContiguousAllocation
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamPriority
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamIfRcfReject
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamIfRowStatus
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      OBJECT t11FamRcFabricNotifyEnable
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      GROUP  t11FamCacheGroup
+      DESCRIPTION
+             "This group is mandatory only for switches that
+             support the concept of Preferred Domain_ID via a best-
+             effort attempt for (short-term) re-assignment of the
+             same FC address identifiers."
+
+      GROUP  t11FamCommandGroup
+      DESCRIPTION
+             "This group is optional."
+    ::= { t11FamMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FamGroup OBJECT-GROUP
+    OBJECTS  { t11FamConfigDomainId,
+               t11FamConfigDomainIdType,
+               t11FamAutoReconfigure,
+               t11FamContiguousAllocation,
+               t11FamPriority,
+               t11FamPrincipalSwitchWwn,
+               t11FamLocalSwitchWwn,
+               t11FamAssignedAreaIdList,
+               t11FamGrantedFcIds,
+               t11FamRecoveredFcIds,
+               t11FamFreeFcIds,
+               t11FamAssignedFcIds,
+               t11FamAvailableFcIds,
+               t11FamRunningPriority,
+               t11FamPrincSwRunningPriority,
+               t11FamState,
+               t11FamLocalPrincipalSwitchSlctns,
+               t11FamPrincipalSwitchSelections,
+               t11FamBuildFabrics,
+               t11FamFabricReconfigures,
+               t11FamDomainId,
+               t11FamSticky,
+               t11FamRestart,
+               t11FamRcFabricNotifyEnable,
+               t11FamEnable,
+               t11FamFabricName,
+               t11FamIfRcfReject,
+               t11FamIfRole,
+               t11FamIfRowStatus,
+               t11FamNotifyFabricIndex
+            }
+    STATUS   current
+    DESCRIPTION
+           "A collection of general objects for displaying and
+           configuring Fabric Address management."
+    ::= { t11FamMIBGroups 1 }
+
+t11FamCommandGroup OBJECT-GROUP
+    OBJECTS  { t11FamRestart }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects used for initiating an
+           operation on the Fabric."
+    ::= { t11FamMIBGroups 2 }
+
+t11FamDatabaseGroup OBJECT-GROUP
+    OBJECTS  { t11FamDatabaseSwitchWwn }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information about
+           Domain-IDs assignments."
+    ::= { t11FamMIBGroups 3 }
+
+t11FamAreaGroup OBJECT-GROUP
+    OBJECTS  { t11FamAreaAssignedPortIdList }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information about
+           currently assigned addresses within a domain."
+    ::= { t11FamMIBGroups 4 }
+
+t11FamCacheGroup OBJECT-GROUP
+    OBJECTS  { t11FamMaxFcIdCacheSize,
+               t11FamFcIdCacheAreaIdPortId,
+               t11FamFcIdCachePortIds
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information about
+           recently-released Fibre Channel Address Identifiers."
+    ::= { t11FamMIBGroups 5 }
+
+t11FamNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS  { t11FamDomainIdNotAssignedNotify,
+                     t11FamNewPrincipalSwitchNotify,
+                     t11FamFabricChangeNotify }
+    STATUS   current
+    DESCRIPTION
+           "A collection of notifications for status monitoring
+           and notification."
+    ::= { t11FamMIBGroups 6 }
+END
diff --git a/snmp_builder/mibs/T11-FC-FABRIC-CONFIG-SERVER-MIB.mib b/snmp_builder/mibs/T11-FC-FABRIC-CONFIG-SERVER-MIB.mib
new file mode 100644
index 0000000..9284959
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-FABRIC-CONFIG-SERVER-MIB.mib
@@ -0,0 +1,1717 @@
+T11-FC-FABRIC-CONFIG-SERVER-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, mib-2, Counter32, Unsigned32
+                  FROM SNMPv2-SMI                  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                  FROM SNMPv2-CONF                 -- [RFC2580]
+    TEXTUAL-CONVENTION, TruthValue, TimeStamp
+                  FROM SNMPv2-TC                   -- [RFC2579]
+    SnmpAdminString
+                  FROM SNMP-FRAMEWORK-MIB          -- [RFC3411]
+    URLString
+                  FROM NETWORK-SERVICES-MIB        -- [RFC2788]
+
+    FcPortType, FcNameIdOrZero, FcDomainIdOrZero,
+    fcmInstanceIndex, fcmSwitchIndex, FcAddressIdOrZero
+                  FROM FC-MGMT-MIB                 -- [RFC4044]
+    T11NsGs4RejectReasonCode
+                  FROM T11-FC-NAME-SERVER-MIB      -- [RFC4438]
+    T11FabricIndex
+                  FROM T11-TC-MIB                  -- [RFC4439]
+    t11FamLocalSwitchWwn
+                  FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [RFC4439]
+
+t11FcFabricConfigServerMIB   MODULE-IDENTITY
+    LAST-UPDATED  "200706270000Z"
+    ORGANIZATION  "For the initial versions, T11.
+                   For later versions, the IETF's IMSS Working Group."
+    CONTACT-INFO
+             "     Claudio DeSanti
+                   Cisco Systems, Inc.
+                   170 West Tasman Drive
+                   San Jose, CA 95134 USA
+                   EMail: cds@cisco.com
+
+                   Keith McCloghrie
+                   Cisco Systems, Inc.
+                   170 West Tasman Drive
+                   San Jose, CA 95134 USA
+                   EMail: kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module for the management of a Fabric
+            Configuration Server (FCS) in a Fibre Channel (FC)
+            network.  An FCS is defined by the FC-GS-5 standard.  This
+
+            MIB provides the capabilities to trigger a discovery of
+            the configuration of one or more Fabrics, to retrieve the
+            results of such a discovery, as well as to control and
+            monitor the operation of an FCS.  The discovered
+            configuration contains information about:
+
+               - Interconnect Elements (IEs), i.e., switches, hubs,
+                 bridges, etc.,
+               - Ports on IEs, and
+               - Platforms that consist of one or more FC nodes.
+
+           Copyright (C) The IETF Trust (2007).  This version of
+           this MIB module is part of RFC 4935;  see the RFC itself for
+           full legal notices."
+    REVISION    "200706270000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4935."
+    ::= { mib-2 162 }
+
+t11FcsMIBObjects       OBJECT IDENTIFIER
+                                    ::= { t11FcFabricConfigServerMIB 1 }
+t11FcsMIBConformance   OBJECT IDENTIFIER
+                                    ::= { t11FcFabricConfigServerMIB 2 }
+t11FcsNotifications    OBJECT IDENTIFIER
+                                    ::= { t11FcFabricConfigServerMIB 0 }
+
+t11FcsDiscovery        OBJECT IDENTIFIER ::= { t11FcsMIBObjects 1 }
+t11FcsDiscoveredConfig OBJECT IDENTIFIER ::= { t11FcsMIBObjects 2 }
+t11FcsStats            OBJECT IDENTIFIER ::= { t11FcsMIBObjects 3 }
+t11FcsNotificationInfo OBJECT IDENTIFIER ::= { t11FcsMIBObjects 4 }
+
+--
+-- Textual Conventions
+--
+
+T11FcListIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS  current
+    DESCRIPTION
+            "An index that identifies a list of elements.
+            All elements that belong to the same list have the
+            same index value.  This syntax is used for objects
+            which identify a list in the INDEX clause of a table
+            of elements of that type of list."
+    SYNTAX  Unsigned32 (1..4294967295)
+
+T11FcListIndexPointerOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS  current
+    DESCRIPTION
+            "Objects with this syntax point to a list of elements
+            contained in a table, by holding the same value as the
+            object with syntax T11FcListIndex defined in the table's
+            INDEX clause, or, zero to indicate an empty list.
+            Note that such a table could have one row per list, or
+            it could have one row per element of a list.
+
+            The definition of an object with this syntax must
+            identify the table(s) into which it points."
+    SYNTAX  Unsigned32 -- the default range of (0..4294967295)
+
+T11FcIeType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "The type of Interconnect Element (IE):
+
+                     unknown(1)  - an unknown IE.
+                     other(2)    - some other type of IE.
+                     switch(3)   - the IE is a switch.
+                     hub(4)      - the IE is a hub.
+                     bridge(5)   - the IE is a bridge."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, Table 96."
+    SYNTAX  INTEGER {
+                unknown(1),
+                other(2),
+                switch(3),
+                hub(4),
+                bridge(5)
+            }
+
+T11FcPortState  ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "The state of a port:
+
+                     unknown(1)  - unknown state.
+                     other(2)    - some other state.
+                     online(3)   - port is in online state.
+                     offline(4)  - port is in offline state.
+                     testing(5)  - port is in testing state.
+                     fault(6)    - port is faulty."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, Table 106."
+    SYNTAX  INTEGER {
+                unknown(1),
+                other(2),
+                online(3),
+                offline(4),
+                testing(5),
+                fault(6)
+            }
+
+T11FcPortTxType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "The technology of the port transceiver:
+
+               unknown(1)         - unknown (includes the 'null' type)
+               other(2)           - some other technology
+               shortwave850nm(3)  - Short wave laser - SN (850 nm)
+               longwave1550nm(4)  - Long wave laser - LL (1550 nm)
+               longwave1310nm(5)  - Long wave laser cost
+                                    reduced - LC (1310 nm)
+               electrical(6)      - Electrical - EL.
+               tenGbaseSr850(7)   - 10GBASE-SR 850nm laser
+               tenGbaseLr1310(8)  - 10GBASE-LR 1310nm laser
+               tenGbaseEr1550(9)  - 10GBASE-ER 1550nm laser
+               tenGbaseLx1300(10) - 10GBASE-LX4 WWDM 1300nm laser
+               tenGbaseSw850(11)  - 10GBASE-SW 850nm laser
+               tenGbaseLw1310(12) - 10GBASE-LW 1310nm laser
+               tenGbaseEw1550(13) - 10GBASE-EW 1550nm laser
+            "
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, Table 101."
+    SYNTAX  INTEGER {
+                unknown(1),
+                other(2),
+                shortwave850nm(3),
+                longwave1550nm(4),
+                longwave1310nm(5),
+                electrical(6),
+                tenGbaseSr850(7),
+                tenGbaseLr1310(8),
+                tenGbaseEr1550(9),
+                tenGbaseLx1300(10),
+                tenGbaseSw850(11),
+                tenGbaseLw1310(12),
+                tenGbaseEw1550(13)
+            }
+
+T11FcsRejectReasonExplanation ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+            "The reject reason code explanation:
+
+                  noAdditionalExplanation(1)
+                       - no additional explanation.
+                  invNameIdForIEOrPort(2)
+                       - the format of IE or port name is invalid.
+                  ieListNotAvailable(3)
+                       - IE list is not available.
+                  ieTypeNotAvailable(4)
+                       - IE type is not available.
+                  domainIdNotAvailable(5)
+                       - Domain ID is not available.
+                  mgmtIdNotAvailable(6)
+                       - mgmt ID is not available.
+                  fabNameNotAvailable(7)
+                       - Fabric_Name is not available.
+                  ielogNameNotAvailable(8)
+                       - IE logical name is not available.
+                  mgmtAddrListNotAvailable(9)
+                       - mgmt address list is not available.
+                  ieInfoListNotAvailable(10)
+                       - IE info list is not available.
+                  portListNotAvailable(11)
+                       - port list is not available.
+                  portTypeNotAvailable(12)
+                       - port type is not available.
+                  phyPortNumNotAvailable(13)
+                       - physical port number is not available.
+                  attPortNameListNotAvailable(14)
+                       - attached port name list is not available.
+                  portStateNotAvailable(15)
+                       - port state is not available.
+                  unableToRegIELogName(16)
+                       - not able to register IE logical name.
+                  platformNameNoExist(17)
+                       - platform name does not exist.
+                  platformNameAlreadyExists(18)
+                       - platform name already exists.
+                  platformNodeNameNoExists(19)
+                       - platform node name does not exist.
+                  platformNodeNameAlreadyExists(20)
+                       - platform node name already exists.
+                  resourceUnavailable(21)
+                       - resource unavailable.
+                  noEntriesInLunMap(22)
+
+                       - zero entries in OS LUN Map.
+                  invalidDeviceNameLength(23)
+                       - invalid OS device name length.
+                  multipleAttributes(24)
+                       - multiple attributes of same type in
+                         platform attribute block.
+                  invalidAttribBlockLength(25)
+                       - invalid platform attribute block length.
+                  attributesMissing(26)
+                       - required platform attributes not present."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, Table 124."
+    SYNTAX  INTEGER {
+                noAdditionalExplanation(1),
+                invNameIdForIEOrPort(2),
+                ieListNotAvailable(3),
+                ieTypeNotAvailable(4),
+                domainIdNotAvailable(5),
+                mgmtIdNotAvailable(6),
+                fabNameNotAvailable(7),
+                ielogNameNotAvailable(8),
+                mgmtAddrListNotAvailable(9),
+                ieInfoListNotAvailable(10),
+                portListNotAvailable(11),
+                portTypeNotAvailable(12),
+                phyPortNumNotAvailable(13),
+                attPortNameListNotAvailable(14),
+                portStateNotAvailable(15),
+                unableToRegIELogName(16),
+                platformNameNoExist(17),
+                platformNameAlreadyExists(18),
+                platformNodeNameNoExists(19),
+                platformNodeNameAlreadyExists(20),
+                resourceUnavailable(21),
+                noEntriesInLunMap(22),
+                invalidDeviceNameLength(23),
+                multipleAttributes(24),
+                invalidAttribBlockLength(25),
+                attributesMissing(26)
+            }
+
+--
+-- Objects for Fabric Discovery
+--
+
+t11FcsFabricDiscoveryTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsFabricDiscoveryEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains control information for discovery
+            of Fabric configuration by switches.
+
+            Values written to objects in this table are not
+            retained over agent reboots."
+    ::= { t11FcsDiscovery 1 }
+
+t11FcsFabricDiscoveryEntry OBJECT-TYPE
+    SYNTAX       T11FcsFabricDiscoveryEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Control information for discovery by the switch
+            identified by fcmInstanceIndex and fcmSwitchIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex }
+    ::= { t11FcsFabricDiscoveryTable 1 }
+
+T11FcsFabricDiscoveryEntry ::= SEQUENCE {
+    t11FcsFabricDiscoveryRangeLow   T11FabricIndex,
+    t11FcsFabricDiscoveryRangeHigh  T11FabricIndex,
+    t11FcsFabricDiscoveryStart      INTEGER,
+    t11FcsFabricDiscoveryTimeOut    Unsigned32
+}
+
+t11FcsFabricDiscoveryRangeLow  OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "The discovery by a particular switch operates
+            within all existing Fabrics that have a Fabric
+            Index within a specific inclusive range.  This
+            object specifies the minimum Fabric Index value
+            within that range.  This value just represents
+            the lower end of the range and does not necessarily
+            represent any existing Fabric."
+    ::= { t11FcsFabricDiscoveryEntry 1 }
+
+t11FcsFabricDiscoveryRangeHigh  OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "The discovery by a particular switch operates
+            within all existing Fabrics that have a Fabric
+
+            Index within a specific inclusive range.  This
+            object specifies the maximum Fabric Index value
+            within that range.  This value just represents the
+            higher end of the range and does not necessarily
+            represent any existing Fabric."
+    ::= { t11FcsFabricDiscoveryEntry 2 }
+
+t11FcsFabricDiscoveryStart  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     start(1),
+                     noOp(2)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "This object provides the capability to trigger the start
+            of a discovery by a Fabric Configuration Server.  If this
+            object is set to 'start', then the discovery is started on
+            those Fabrics that have their Fabric Index value in the
+            range specified by t11FcsFabricDiscoveryRangeLow and
+            t11FcsFabricDiscoveryRangeHigh.  It is recommended that
+            whenever an instance of this object is set to 'start',
+            that the desired range be specified at the same time by
+            setting the corresponding instances of
+            t11FcsFabricDiscoveryRangeLow and
+            t11FcsFabricDiscoveryRangeHigh.
+
+            Setting this object to 'start' will be rejected if a
+            discovery is already/still in progress on any Fabrics in
+            the specified range.
+
+            No action is taken if this object is set to 'noOp'.
+            The value of this object when read is always 'noOp'."
+    ::= { t11FcsFabricDiscoveryEntry 3 }
+
+t11FcsFabricDiscoveryTimeOut OBJECT-TYPE
+    SYNTAX       Unsigned32 (300..86400)
+    UNITS        "Seconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "The minimum interval of time for which the discovered
+            Fabric information is cached by a Fabric Configuration
+            Server."
+    DEFVAL { 900 }
+    ::= { t11FcsFabricDiscoveryEntry 4 }
+
+--
+
+-- Discovery State table
+--
+
+t11FcsDiscoveryStateTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsDiscoveryStateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains the status of discovery of
+            locally known Fabrics."
+    ::= { t11FcsDiscovery 2 }
+
+t11FcsDiscoveryStateEntry OBJECT-TYPE
+    SYNTAX       T11FcsDiscoveryStateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The discovery status for a particular Fabric on the
+            switch identified by fcmInstanceIndex and fcmSwitchIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }
+    ::= { t11FcsDiscoveryStateTable 1 }
+
+T11FcsDiscoveryStateEntry ::= SEQUENCE {
+    t11FcsFabricIndex              T11FabricIndex,
+    t11FcsDiscoveryStatus          INTEGER,
+    t11FcsDiscoveryCompleteTime    TimeStamp
+}
+
+t11FcsFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A unique index value that uniquely identifies a
+            particular Fabric.
+
+            In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
+            can operate within one (or more) physical infrastructures,
+            and this index value is used to uniquely identify a
+            particular (physical or virtual) Fabric within a physical
+            infrastructure.
+
+            In a Fabric conformant to versions earlier than FC-SW-4,
+            only a single Fabric could operate within a physical
+            infrastructure, and thus, the value of this Fabric Index
+            was defined to always be 1."
+    ::= { t11FcsDiscoveryStateEntry 1 }
+
+t11FcsDiscoveryStatus  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     inProgress(1),
+                     completed(2),
+                     localOnly(3)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "The status of the discovery for the particular Fabric.
+
+            Initially when the switch comes up, all instances of this
+            object have the value: 'localOnly', and the database
+            contains only local information, i.e., no information
+            discovered via the Fabric Configuration Server protocol
+            specified in FC-GS-5.
+
+            If t11FcsFabricDiscoveryStart is set to 'start' for a
+            range of Fabrics that includes this Fabric, then the
+            value of this object transitions to 'inProgress'.  When
+            the discovery completes, this object transitions to
+            'completed', and the data is cached for the minimum
+            interval of time specified by
+            t11FcsFabricDiscoveryTimeOut.  After this interval has
+            been exceeded, the data may be lost, in which case, the
+            value of this object changes to 'localOnly'.
+
+            This object cannot be set via SNMP to any value other
+            than 'localOnly'.  If this object is set (via SNMP) to
+            'localOnly', the cached data for the Fabric is discarded
+            immediately, and if a discovery initiated from this
+            switch was in progress for this Fabric, then that
+            discovery is aborted."
+    ::= { t11FcsDiscoveryStateEntry 2 }
+
+t11FcsDiscoveryCompleteTime  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "This object contains the value of sysUpTime at which
+            discovery was most recently completed or aborted on this
+            Fabric.  This object contains the value of zero before
+            the first discovery on this Fabric."
+    ::= { t11FcsDiscoveryStateEntry 3 }
+
+--
+--      The Database of Fabric Configuration Information
+
+--
+-- Interconnect Element table
+--
+
+t11FcsIeTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsIeEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A table of Interconnect Elements.  Interconnect
+            Elements (IEs) are switches, hubs, bridges etc.
+
+            By default, the Fabric Configuration Server will
+            maintain detailed information pertaining only to
+            local resources.  As far as discovered topology is
+            concerned, only the IE name, type, and Domain ID
+            information will be maintained.  If a discovery
+            cycle is triggered on a set of Fabrics, this table
+            along with the Port and Platform tables will be
+            populated with the discovered information.  The
+            discovered data will be retained in this table for
+            at least t11FcsFabricDiscoveryTimeOut seconds after
+            the completion of its discovery or until the
+            discovered data is invalidated."
+    ::= { t11FcsDiscoveredConfig 1 }
+
+t11FcsIeEntry OBJECT-TYPE
+    SYNTAX       T11FcsIeEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Information about an Interconnect Element that was
+            discovered on a Fabric (identified by t11FcsFabricIndex),
+            by a switch (identified by fcmInstanceIndex and
+            fcmSwitchIndex)."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,
+              t11FcsIeName }
+    ::= { t11FcsIeTable 1 }
+
+T11FcsIeEntry ::= SEQUENCE {
+    t11FcsIeName                FcNameIdOrZero,
+    t11FcsIeType                T11FcIeType,
+    t11FcsIeDomainId            FcDomainIdOrZero,
+    t11FcsIeMgmtId              FcAddressIdOrZero,
+    t11FcsIeFabricName          FcNameIdOrZero,
+    t11FcsIeLogicalName         OCTET STRING,
+    t11FcsIeMgmtAddrListIndex   T11FcListIndexPointerOrZero,
+    t11FcsIeInfoList            OCTET STRING
+}
+
+t11FcsIeName  OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The WWN of an Interconnect Element.  This object
+            uniquely identifies an Interconnect Element on a
+            Fabric.  If the IE is a switch, then this object
+            is the Switch_Name (WWN) of the switch."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.1."
+    ::= { t11FcsIeEntry 1 }
+
+t11FcsIeType  OBJECT-TYPE
+    SYNTAX       T11FcIeType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The type of this Interconnect Element."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.2"
+    ::= { t11FcsIeEntry 2 }
+
+t11FcsIeDomainId  OBJECT-TYPE
+    SYNTAX       FcDomainIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The Domain ID of this Interconnect Element."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.3."
+    ::= { t11FcsIeEntry 3 }
+
+t11FcsIeMgmtId  OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The management identifier of this Interconnect Element.
+            If the Interconnect Element is a switch, this object will
+            be the Domain Controller identifier of the switch.  When
+            the value of the identifier is unknown, this object
+            contains the all-zeros value: x'00 00 00'."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.4."
+    DEFVAL { '000000'h }
+    ::= { t11FcsIeEntry 4 }
+
+t11FcsIeFabricName  OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The Fabric_Name (WWN) of this Interconnect Element.
+            When the Fabric_Name is unknown, this object contains
+            the all-zeros value: x'00 00 00 00 00 00 00 00'."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.5."
+    DEFVAL { '0000000000000000'h }
+    ::= { t11FcsIeEntry 5 }
+
+t11FcsIeLogicalName  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The logical name of this Interconnect Element.
+            When the logical name is unknown, this object contains
+            the zero-length string."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.6."
+    ::= { t11FcsIeEntry 6 }
+
+t11FcsIeMgmtAddrListIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndexPointerOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The management address list for this Interconnect Element.
+            This object points to an entry in the
+            t11FcsMgmtAddrListTable."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.7."
+    ::= { t11FcsIeEntry 7 }
+
+t11FcsIeInfoList  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..252))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The information list for this Interconnect Element.
+
+            The value of this object is formatted as specified in
+            FC-GS-5, i.e., it has the following substrings in order:
+            vendor name, model name/number, and release code/level,
+            followed by zero or more substrings of vendor-specific
+            information.  Each substring is terminated with a byte
+            containing a null value (x'00')."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.8"
+    ::= { t11FcsIeEntry 8 }
+
+--
+-- Management Address List table
+--
+
+t11FcsMgmtAddrListTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsMgmtAddrListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains the set of management address lists
+            that are currently referenced by any instance of the
+            t11FcsIeMgmtAddrListIndex or
+            t11FcsPlatformMgmtAddrListIndex objects."
+    ::= { t11FcsDiscoveredConfig 2 }
+
+t11FcsMgmtAddrListEntry  OBJECT-TYPE
+    SYNTAX       T11FcsMgmtAddrListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Information about one management address in a
+            management address list, which is known to a
+            switch (identified by fcmInstanceIndex and
+            fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11FcsMgmtAddrListIndex, t11FcsMgmtAddrIndex }
+    ::= { t11FcsMgmtAddrListTable 1 }
+
+T11FcsMgmtAddrListEntry ::= SEQUENCE {
+    t11FcsMgmtAddrListIndex        T11FcListIndex,
+    t11FcsMgmtAddrIndex            Unsigned32,
+    t11FcsMgmtAddr                 URLString
+}
+
+t11FcsMgmtAddrListIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The index value of the management address list."
+    ::= { t11FcsMgmtAddrListEntry 1 }
+
+t11FcsMgmtAddrIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An integer value to distinguish different
+            management addresses in the same list."
+    ::= { t11FcsMgmtAddrListEntry 2 }
+
+t11FcsMgmtAddr  OBJECT-TYPE
+    SYNTAX       URLString
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The management address of this entry.
+
+            The format of this object is a Uniform Resource
+            Locator (URL), e.g., for SNMP, see RFC 4088."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.2.7"
+    ::= { t11FcsMgmtAddrListEntry 3 }
+
+--
+-- Ports
+--
+
+t11FcsPortTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsPortEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains information about the ports of IEs."
+    ::= { t11FcsDiscoveredConfig 4 }
+
+t11FcsPortEntry  OBJECT-TYPE
+    SYNTAX       T11FcsPortEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Information about a particular port of an Interconnect
+            Element (identified by t11FcsIeName).  The port is
+            connected to a Fabric (identified by t11FcsFabricIndex)
+            and known to a switch (identified by fcmInstanceIndex
+            and fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,
+              t11FcsIeName, t11FcsPortName }
+    ::= { t11FcsPortTable 1 }
+
+T11FcsPortEntry ::= SEQUENCE {
+    t11FcsPortName                    FcNameIdOrZero,
+    t11FcsPortType                    FcPortType,
+    t11FcsPortTxType                  T11FcPortTxType,
+    t11FcsPortModuleType              Unsigned32,
+    t11FcsPortPhyPortNum              Unsigned32,
+    t11FcsPortAttachPortNameIndex     T11FcListIndexPointerOrZero,
+    t11FcsPortState                   T11FcPortState,
+    t11FcsPortSpeedCapab              OCTET STRING,
+    t11FcsPortOperSpeed               OCTET STRING,
+    t11FcsPortZoningEnfStatus         OCTET STRING
+}
+
+t11FcsPortName  OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The Port_Name (WWN) of the port for which this row
+            contains information."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.1."
+    ::= { t11FcsPortEntry 1 }
+
+t11FcsPortType  OBJECT-TYPE
+    SYNTAX       FcPortType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The Port Type of this port."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.2."
+    ::= { t11FcsPortEntry 2 }
+
+t11FcsPortTxType  OBJECT-TYPE
+    SYNTAX       T11FcPortTxType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The Port TX Type of this port."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.3."
+    ::= { t11FcsPortEntry 3 }
+
+t11FcsPortModuleType  OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..255)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The port module type of this port."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.4."
+    ::= { t11FcsPortEntry 4 }
+
+t11FcsPortPhyPortNum  OBJECT-TYPE
+    SYNTAX       Unsigned32 -- the default range of (0..4294967295)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The physical number for this port.  FC-GS-5 says that
+            the contents of this field, which are carried in a field
+            with a size of 4 bytes, are not to be restricted due to
+            vendor-specific methods for numbering physical ports."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.5."
+    ::= { t11FcsPortEntry 5 }
+
+t11FcsPortAttachPortNameIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndexPointerOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The attached port name list for this port.  This object
+            points to an entry in the t11FcsAttachPortNameListTable."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.6."
+    ::= { t11FcsPortEntry 6 }
+
+t11FcsPortState  OBJECT-TYPE
+    SYNTAX       T11FcPortState
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The state of this port."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.7."
+    ::= { t11FcsPortEntry 7 }
+
+t11FcsPortSpeedCapab  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (2))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The port speed capabilities of this port.  The two octets
+            of the value are formatted as described in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.8."
+    ::= { t11FcsPortEntry 8 }
+
+t11FcsPortOperSpeed  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (2))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The operating speed of this port.  The two octets
+            of the value are formatted as described in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.9."
+    ::= { t11FcsPortEntry 9 }
+
+t11FcsPortZoningEnfStatus  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (12))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The zoning enforcement status of this port.  The 12
+            octets of the value are formatted as described in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.10."
+    ::= { t11FcsPortEntry 10 }
+
+--
+-- Attached Port List table
+--
+
+t11FcsAttachPortNameListTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsAttachPortNameListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains all the lists of attach port
+            names."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.6"
+    ::= { t11FcsDiscoveredConfig 5 }
+
+t11FcsAttachPortNameListEntry  OBJECT-TYPE
+    SYNTAX       T11FcsAttachPortNameListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Information about the name of a particular attached port,
+            which is known to a switch (identified by fcmInstanceIndex
+            and fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex,  fcmSwitchIndex,
+              t11FcsAttachPortNameListIndex, t11FcsAttachPortName }
+    ::= { t11FcsAttachPortNameListTable 1 }
+
+T11FcsAttachPortNameListEntry ::= SEQUENCE {
+    t11FcsAttachPortNameListIndex        T11FcListIndex,
+    t11FcsAttachPortName                 OCTET STRING
+}
+
+t11FcsAttachPortNameListIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The index value of the attach port name list."
+    ::= { t11FcsAttachPortNameListEntry 1 }
+
+t11FcsAttachPortName  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (12))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The attached port name.  Zero or more of these names
+            may be associated with a port object.
+            The first 8 bytes of this object contain the WWN of
+            the port followed by 2 reserved bytes.  Following
+            this is one byte of Port flags and one byte of
+            Port type, as described in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.3.6"
+    ::= { t11FcsAttachPortNameListEntry 2 }
+
+--
+-- Platforms
+--
+
+t11FcsPlatformTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsPlatformEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains information on platforms.
+
+            By default, this table only contains local (e.g., for a
+            local switch) information.  If a discovery is triggered,
+            this table will also contain information gathered by the
+            discovery process.  The discovered information is retained
+            in this table for at least t11FcsFabricDiscoveryTimeOut
+            seconds after the completion of its discovery or until
+            the discovered cache is invalidated."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4"
+    ::= { t11FcsDiscoveredConfig 6 }
+
+t11FcsPlatformEntry  OBJECT-TYPE
+    SYNTAX       T11FcsPlatformEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Information about a particular platform, which is
+            known to a switch (identified by fcmInstanceIndex and
+            fcmSwitchIndex).
+
+            A platform can contain multiple nodes.  Information on
+            nodes is contained in the t11FcsNodeNameListTable.  The
+            t11FcsPlatformNodeNameListIndex object in this table
+
+            points to the list of nodes contained in this platform.
+            Similarly, the t11FcsPlatformMgmtAddrListIndex object in
+            this table points to the list of management addresses
+            associated with this platform."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11FcsFabricIndex, t11FcsPlatformIndex }
+    ::= { t11FcsPlatformTable 1 }
+
+T11FcsPlatformEntry ::= SEQUENCE {
+    t11FcsPlatformIndex              Unsigned32,
+    t11FcsPlatformName               OCTET STRING,
+    t11FcsPlatformType               OCTET STRING,
+    t11FcsPlatformNodeNameListIndex  T11FcListIndexPointerOrZero,
+    t11FcsPlatformMgmtAddrListIndex  T11FcListIndexPointerOrZero,
+    t11FcsPlatformVendorId           SnmpAdminString,
+    t11FcsPlatformProductId          SnmpAdminString,
+    t11FcsPlatformProductRevLevel    SnmpAdminString,
+    t11FcsPlatformDescription        SnmpAdminString,
+    t11FcsPlatformLabel              SnmpAdminString,
+    t11FcsPlatformLocation           SnmpAdminString,
+    t11FcsPlatformSystemID           SnmpAdminString,
+    t11FcsPlatformSysMgmtAddr        T11FcListIndexPointerOrZero,
+    t11FcsPlatformClusterId          SnmpAdminString,
+    t11FcsPlatformClusterMgmtAddr    T11FcListIndexPointerOrZero,
+    t11FcsPlatformFC4Types           OCTET STRING
+}
+
+t11FcsPlatformIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An integer value to distinguish one platform from
+            other platforms in the same Fabric."
+    ::= { t11FcsPlatformEntry 1 }
+
+t11FcsPlatformName  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The name of this platform.  The last byte of the value
+            indicates the format of the name (even if the name itself
+            is the zero-length string) as specified in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.2"
+    ::= { t11FcsPlatformEntry 2 }
+
+t11FcsPlatformType  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (4))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The type(s) of this platform, encoded in 4 bytes as
+            specified in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.3"
+    ::= { t11FcsPlatformEntry 3 }
+
+t11FcsPlatformNodeNameListIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndexPointerOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The list of nodes for this platform.  This object points
+            to an entry in the t11FcsNodeNameListTable."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.6"
+    ::= { t11FcsPlatformEntry 4 }
+
+t11FcsPlatformMgmtAddrListIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndexPointerOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The list of management addresses for this platform.  This
+            object points to an entry in the t11FcsMgmtAddrListTable."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.7"
+    ::= { t11FcsPlatformEntry 5 }
+
+t11FcsPlatformVendorId  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 12))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The identifier of the vendor of this platform, in the
+            format specified in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.5"
+    ::= { t11FcsPlatformEntry 6 }
+
+t11FcsPlatformProductId  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 20))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The vendor's product and/or model identifier for this
+            platform, in the format specified in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.5"
+    ::= { t11FcsPlatformEntry 7 }
+
+t11FcsPlatformProductRevLevel  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 4..32))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The product revision level for this platform, in the
+            format specified in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.5"
+    ::= { t11FcsPlatformEntry 8 }
+
+t11FcsPlatformDescription  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 4..128))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The description of this platform, in the
+            format specified in FC-GS-5.  This value should
+            include the full name and version identification of the
+            platform's hardware type and software operating system."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.10"
+    ::= { t11FcsPlatformEntry 9 }
+
+t11FcsPlatformLabel  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 4..64))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "An administratively assigned symbolic name for the
+            platform, in the format specified in FC-GS-5."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.11"
+    ::= { t11FcsPlatformEntry 10 }
+
+t11FcsPlatformLocation  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 4..128))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The physical location of the platform, in the format
+            specified in FC-GS-5 (e.g., 'telephone closet, 3rd floor')."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.12"
+    ::= { t11FcsPlatformEntry 11 }
+
+t11FcsPlatformSystemID  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 4..64))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "An identifier for a hosting system that this platform is
+            associated with.  This identifier is used to associate
+            platforms of logical types (e.g., logical partitions) with
+            a physical system."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.5"
+    ::= { t11FcsPlatformEntry 12 }
+
+t11FcsPlatformSysMgmtAddr  OBJECT-TYPE
+    SYNTAX       T11FcListIndexPointerOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A list of management addresses for the platform."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, sections 6.2.3.4.5 and 6.2.3.2.7."
+    ::= { t11FcsPlatformEntry 13 }
+
+t11FcsPlatformClusterId  OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0 | 4..64))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "An identifier for a cluster that this platform is
+             associated with, where a cluster is a set of independent
+             platforms that are managed together to provide increased
+             performance capabilities, failover, etc."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.5"
+    ::= { t11FcsPlatformEntry 14 }
+
+t11FcsPlatformClusterMgmtAddr  OBJECT-TYPE
+    SYNTAX       T11FcListIndexPointerOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A list of management addresses for the cluster identified
+            in the corresponding instance of t11FcsPlatformClusterId."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, sections 6.2.3.4.5 and 6.2.3.2.7."
+    ::= { t11FcsPlatformEntry 15 }
+
+t11FcsPlatformFC4Types  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0 | 32))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The FC-4 types supported by this platform, formatted as
+            a bit mask as specified in FC-GS-5.  If this object
+            contains the zero-length string, the types are unknown."
+    REFERENCE
+            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,
+            FC-GS-5, section 6.2.3.4.5"
+    ::= { t11FcsPlatformEntry 16 }
+
+--
+-- Node Name List table
+--
+
+t11FcsNodeNameListTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsNodeNameListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains all the lists of nodes."
+    ::= { t11FcsDiscoveredConfig 7 }
+
+t11FcsNodeNameListEntry  OBJECT-TYPE
+    SYNTAX       T11FcsNodeNameListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Information about a node, which is known to a
+
+            switch (identified by fcmInstanceIndex and
+            fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex,  fcmSwitchIndex,
+              t11FcsNodeNameListIndex, t11FcsNodeName }
+    ::= { t11FcsNodeNameListTable 1 }
+
+T11FcsNodeNameListEntry ::= SEQUENCE {
+    t11FcsNodeNameListIndex       T11FcListIndex,
+    t11FcsNodeName                FcNameIdOrZero
+}
+
+t11FcsNodeNameListIndex  OBJECT-TYPE
+    SYNTAX       T11FcListIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The index value of the node name list."
+    ::= { t11FcsNodeNameListEntry 1 }
+
+t11FcsNodeName  OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The name of this node."
+    ::= { t11FcsNodeNameListEntry 2 }
+
+--
+-- Statistics
+--
+
+t11FcsStatsTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This table contains all the statistics related
+            to the Fabric Configuration Server."
+    ::= { t11FcsStats 1 }
+
+t11FcsStatsEntry  OBJECT-TYPE
+    SYNTAX       T11FcsStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A set of statistics for a particular Fabric (identified
+            by t11FcsFabricIndex) on a switch (identified by
+            fcmInstanceIndex and fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }
+    ::= { t11FcsStatsTable 1 }
+
+T11FcsStatsEntry ::= SEQUENCE {
+    t11FcsInGetReqs                Counter32,
+    t11FcsOutGetReqs               Counter32,
+    t11FcsInRegReqs                Counter32,
+    t11FcsOutRegReqs               Counter32,
+    t11FcsInDeregReqs              Counter32,
+    t11FcsOutDeregReqs             Counter32,
+    t11FcsRejects                  Counter32
+}
+
+t11FcsInGetReqs  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Get Requests received by the Fabric
+            Configuration Server on this Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 1 }
+
+t11FcsOutGetReqs  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Get Requests sent by the Fabric
+            Configuration Server on this Fabric to other
+            servers in the Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 2 }
+
+t11FcsInRegReqs  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registration Requests received by the
+            Fabric Configuration Server on this Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 3 }
+
+t11FcsOutRegReqs  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registration Requests sent by the
+            Fabric Configuration Server on this Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 4 }
+
+t11FcsInDeregReqs  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Deregistration Requests received by
+            the Fabric Configuration Server on this Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 5 }
+
+t11FcsOutDeregReqs  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Deregistration Requests sent by
+            the Fabric Configuration Server on this Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 6 }
+
+t11FcsRejects  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of requests rejected by the Fabric
+            Configuration Server on this Fabric.
+
+            This counter has no discontinuities other than
+            those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcsStatsEntry 7 }
+
+--
+-- Notification Control Table
+--
+
+t11FcsNotifyControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcsNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A table of control information for notifications
+            generated due to Fabric Configuration Server events.
+
+            Values written to objects in this table should be
+            persistent/retained over agent reboots."
+    ::= { t11FcsNotificationInfo 1 }
+
+t11FcsNotifyControlEntry OBJECT-TYPE
+    SYNTAX       T11FcsNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "Each entry contains notification control information
+            for a Fabric Configuration Server on a particular Fabric
+            (identified by t11FcsFabricIndex) on a particular
+            switch (identified by fcmInstanceIndex and
+            fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11FcsFabricIndex }
+    ::= { t11FcsNotifyControlTable 1 }
+
+T11FcsNotifyControlEntry ::= SEQUENCE {
+     t11FcsReqRejectNotifyEnable        TruthValue,
+     t11FcsDiscoveryCompNotifyEnable    TruthValue,
+     t11FcsMgmtAddrChangeNotifyEnable   TruthValue,
+     t11FcsRejectCtCommandString        OCTET STRING,
+     t11FcsRejectRequestSource          FcNameIdOrZero,
+     t11FcsRejectReasonCode             T11NsGs4RejectReasonCode,
+     t11FcsRejectReasonCodeExp          T11FcsRejectReasonExplanation,
+     t11FcsRejectReasonVendorCode       OCTET STRING
+}
+
+t11FcsReqRejectNotifyEnable OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+            "This object specifies if the Fabric Configuration
+            Server should generate 't11FcsRqRejectNotification'
+            notifications.
+
+            If the value of this object is 'true', then the
+            notification is issued.  If the value of this object
+            is 'false', then the notification is not issued."
+    DEFVAL { false }
+    ::= { t11FcsNotifyControlEntry 1 }
+
+t11FcsDiscoveryCompNotifyEnable OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+            "This object specifies if the Fabric Configuration
+            Server should generate 't11FcsDiscoveryCompleteNotify'
+            notifications.
+
+            If the value of this object is 'true', then the
+            notification is issued.  If the value of this object
+            is 'false', then the notification is not issued."
+    DEFVAL { false }
+    ::= { t11FcsNotifyControlEntry 2 }
+
+t11FcsMgmtAddrChangeNotifyEnable OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+            "This object specifies if the Fabric Configuration
+            Server should generate 't11FcsMgmtAddrChangeNotify'
+            notifications.
+
+            If the value of this object is 'true', then the
+            notification is issued.  If the value of this object
+            is 'false', then the notification is not issued."
+    DEFVAL { false }
+    ::= { t11FcsNotifyControlEntry 3 }
+
+t11FcsRejectCtCommandString OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "The binary content of the Fabric Configuration Server
+
+            request, formatted as an octet string (in network byte
+            order) containing the Common Transport Information Unit
+            (CT_IU), as described in Table 2 of FC-GS-5 (including
+            the preamble), which was most recently rejected by the
+            Fabric Configuration Server for this Fabric.
+
+            This object contains the zero-length string if and when the
+            CT-IU's content is unavailable.
+
+            When the length of this object is 255 octets, it contains
+            the first 255 octets of the CT-IU (in network byte order)."
+    ::= { t11FcsNotifyControlEntry 4 }
+
+t11FcsRejectRequestSource OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The WWN that was the source of the CT_IU contained in
+            the corresponding instance of t11FcsRejectCtCommandString."
+    ::= { t11FcsNotifyControlEntry 5 }
+
+t11FcsRejectReasonCode OBJECT-TYPE
+    SYNTAX        T11NsGs4RejectReasonCode
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "This object contains the reason code corresponding
+            to the latest Fabric Configuration Server request
+            rejected by the local system."
+    ::= { t11FcsNotifyControlEntry 6 }
+
+t11FcsRejectReasonCodeExp OBJECT-TYPE
+    SYNTAX        T11FcsRejectReasonExplanation
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "When the corresponding instance of
+            t11FcsRejectReasonCode has the value: 'unable to
+            perform command request', this object contains the
+            corresponding reason code explanation."
+    ::= { t11FcsNotifyControlEntry 7 }
+
+t11FcsRejectReasonVendorCode OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(1))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+            "A registration reject vendor-specific code.  This
+            object contains the vendor-specific code of the most
+            recently rejected Fabric Configuration Server
+            Registration request for the particular port on
+            the particular Fabric."
+    ::= { t11FcsNotifyControlEntry 8 }
+--
+-- Notifications
+--
+
+t11FcsRqRejectNotification NOTIFICATION-TYPE
+    OBJECTS { t11FamLocalSwitchWwn,
+              t11FcsRejectReasonCode,
+              t11FcsRejectReasonCodeExp,
+              t11FcsRejectReasonVendorCode }
+    STATUS  current
+    DESCRIPTION
+            "This notification is generated whenever the Fabric
+            Configuration Server on a switch (indicated by the
+            value of t11FamLocalSwitchWwn) rejects a Fabric
+            Configuration Server request.
+
+            The Fabric Configuration Server should update the
+            t11FcsRejectReasonCode, t11FcsRejectReasonCodeExp
+            and t11FcsRejectReasonVendorCode objects with the
+            corresponding reason code, explanation and vendor
+            specific code before sending the notification."
+    ::= { t11FcsNotifications 1 }
+
+t11FcsDiscoveryCompleteNotify NOTIFICATION-TYPE
+    OBJECTS {t11FcsFabricDiscoveryRangeLow}
+    STATUS  current
+    DESCRIPTION
+            "This notification is generated by the Fabric
+            Configuration Server on the completion of the
+            discovery of Fabrics in the range that has
+            t11FcsFabricDiscoveryRangeLow at its low end."
+    ::= { t11FcsNotifications 2 }
+
+t11FcsMgmtAddrChangeNotify NOTIFICATION-TYPE
+    OBJECTS { t11FcsMgmtAddrChangeFabricIndex,
+              t11FcsMgmtAddrChangeIeName }
+    STATUS  current
+    DESCRIPTION
+            "This notification is generated by the Fabric
+            Configuration Server whenever the management
+            address of an IE changes, i.e., whenever an
+            entry in the t11FcsMgmtAddrListTable changes."
+    ::= { t11FcsNotifications 3 }
+
+t11FcsMgmtAddrChangeFabricIndex OBJECT-TYPE
+    SYNTAX        T11FabricIndex
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+            "The index value that identifies the Fabric on which
+            a management address change has been detected."
+    ::= { t11FcsNotificationInfo 2 }
+
+t11FcsMgmtAddrChangeIeName OBJECT-TYPE
+    SYNTAX        FcNameIdOrZero
+    MAX-ACCESS    accessible-for-notify
+    STATUS        current
+    DESCRIPTION
+            "The IE for which a management address change has been
+            detected."
+    ::= { t11FcsNotificationInfo 3 }
+
+-- Conformance
+
+t11FcsMIBCompliances OBJECT IDENTIFIER ::= { t11FcsMIBConformance 1 }
+t11FcsMIBGroups      OBJECT IDENTIFIER ::= { t11FcsMIBConformance 2 }
+
+t11FcsMIBCompliance MODULE-COMPLIANCE
+    STATUS        current
+    DESCRIPTION
+            "The compliance statement for entities that
+            implement the Fabric Configuration Server."
+    MODULE MANDATORY-GROUPS { t11FcsDiscoveredConfigGroup,
+                              t11FcsDiscoveryStatusGroup,
+                              t11FcsNotificationInfoGroup,
+                              t11FcsNotificationGroup }
+
+    GROUP   t11FcsDiscoveryControlGroup
+    DESCRIPTION
+            "This group is mandatory only for those systems that
+            allow discovery of configuration by Fabric Configuration
+            Servers to be controlled via a MIB."
+
+    GROUP   t11FcsStatisticsGroup
+    DESCRIPTION
+            "These counters, containing Fabric Configuration
+            Server statistics, are mandatory only for those systems
+            that count such events."
+
+    OBJECT   t11FcsDiscoveryStatus
+    WRITE-SYNTAX INTEGER { localOnly(3) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required.
+             However, if write access is supported, then the only
+             writable value is 'localOnly'."
+
+    OBJECT   t11FcsReqRejectNotifyEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT   t11FcsDiscoveryCompNotifyEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT   t11FcsMgmtAddrChangeNotifyEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+    ::= { t11FcsMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FcsDiscoveryControlGroup OBJECT-GROUP
+    OBJECTS { t11FcsFabricDiscoveryRangeLow,
+              t11FcsFabricDiscoveryRangeHigh,
+              t11FcsFabricDiscoveryStart,
+              t11FcsFabricDiscoveryTimeOut }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects for requesting a Fabric
+            Configuration Server to discover the configuration
+            of one or more Fabrics."
+    ::= { t11FcsMIBGroups 1 }
+
+t11FcsDiscoveryStatusGroup OBJECT-GROUP
+    OBJECTS { t11FcsDiscoveryStatus,
+              t11FcsDiscoveryCompleteTime }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects with which to monitor the
+            status of discovery (of Fabric configurations) by
+            Fabric Configuration Servers."
+    ::= { t11FcsMIBGroups 2 }
+
+t11FcsDiscoveredConfigGroup OBJECT-GROUP
+    OBJECTS {
+              t11FcsIeType,
+              t11FcsIeDomainId,
+              t11FcsIeMgmtId,
+              t11FcsIeFabricName,
+              t11FcsIeLogicalName,
+              t11FcsIeMgmtAddrListIndex,
+              t11FcsIeInfoList,
+              t11FcsMgmtAddr,
+              t11FcsPortType,
+              t11FcsPortTxType,
+              t11FcsPortModuleType,
+              t11FcsPortPhyPortNum,
+              t11FcsPortAttachPortNameIndex,
+              t11FcsPortState,
+              t11FcsPortSpeedCapab,
+              t11FcsPortOperSpeed,
+              t11FcsPortZoningEnfStatus,
+              t11FcsAttachPortName,
+              t11FcsPlatformName,
+              t11FcsPlatformType,
+              t11FcsPlatformNodeNameListIndex,
+              t11FcsPlatformMgmtAddrListIndex,
+              t11FcsPlatformVendorId,
+              t11FcsPlatformProductId,
+              t11FcsPlatformProductRevLevel,
+              t11FcsPlatformDescription,
+              t11FcsPlatformLabel,
+              t11FcsPlatformLocation,
+              t11FcsPlatformSystemID,
+              t11FcsPlatformSysMgmtAddr,
+              t11FcsPlatformClusterId,
+              t11FcsPlatformClusterMgmtAddr,
+              t11FcsPlatformFC4Types,
+              t11FcsNodeName }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects to contain the Fabric configuration
+            information discovered by Fabric Configuration Servers."
+    ::= { t11FcsMIBGroups 3 }
+
+t11FcsStatisticsGroup OBJECT-GROUP
+    OBJECTS { t11FcsInGetReqs,
+              t11FcsOutGetReqs,
+              t11FcsInRegReqs,
+              t11FcsOutRegReqs,
+              t11FcsInDeregReqs,
+              t11FcsOutDeregReqs,
+              t11FcsRejects }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects for Fabric Configuration Server
+            statistics information."
+    ::= { t11FcsMIBGroups 4 }
+
+t11FcsNotificationInfoGroup OBJECT-GROUP
+    OBJECTS { t11FcsReqRejectNotifyEnable,
+              t11FcsDiscoveryCompNotifyEnable,
+              t11FcsMgmtAddrChangeNotifyEnable,
+              t11FcsRejectCtCommandString,
+              t11FcsRejectRequestSource,
+              t11FcsRejectReasonCode,
+              t11FcsRejectReasonCodeExp,
+              t11FcsRejectReasonVendorCode,
+              t11FcsMgmtAddrChangeFabricIndex,
+              t11FcsMgmtAddrChangeIeName }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notification control and notification
+            information objects for monitoring Fabric
+            Configuration Servers."
+    ::= { t11FcsMIBGroups 5 }
+
+t11FcsNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { t11FcsRqRejectNotification,
+                    t11FcsDiscoveryCompleteNotify,
+                    t11FcsMgmtAddrChangeNotify }
+    STATUS  current
+    DESCRIPTION
+            "A collection of notifications for monitoring Fabric
+            Configuration Servers."
+    ::= { t11FcsMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-FABRIC-LOCK-MIB.mib b/snmp_builder/mibs/T11-FC-FABRIC-LOCK-MIB.mib
new file mode 100644
index 0000000..1dc91f0
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-FABRIC-LOCK-MIB.mib
@@ -0,0 +1,490 @@
+T11-FC-FABRIC-LOCK-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    mib-2                              FROM SNMPv2-SMI   -- [RFC2578]
+    RowStatus                          FROM SNMPv2-TC    -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF  -- [RFC2580]
+    InetAddressType, InetAddress       FROM
+                                       INET-ADDRESS-MIB  -- [RFC4001]
+    fcmInstanceIndex, fcmSwitchIndex   FROM FC-MGMT-MIB  -- [RFC4044]
+    T11NsGs4RejectReasonCode           FROM
+                                 T11-FC-NAME-SERVER-MIB  -- [RFC4438]
+    T11FabricIndex                     FROM T11-TC-MIB;  -- [RFC4439]
+
+t11FabricLockMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200706270000Z"
+    ORGANIZATION  "For the initial versions, T11.
+                   For later versions, the IETF's IMSS Working Group."
+    CONTACT-INFO
+           "      Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for the management of locks on a Fibre
+           Channel Fabric.  A Fibre Channel Fabric lock is used to
+           ensure serialized access to some types of management data
+           related to a Fabric, e.g., the Fabric's Zoning Database.
+
+           Some (managing) applications generate Fabric locks by
+           initiating server sessions.  Server sessions are
+           defined generically in FC-GS-5 to represent a collection of
+           one or more requests to the session's server, e.g., to the
+           Zone Server.  Such a session is started by a Server Session
+           Begin (SSB) request, and terminated by a Server Session End
+           (SSE) request.  The switch receiving the SSB is called the
+           'managing' switch.  Some applications require the
+           'managing' switch to lock the Fabric for the particular
+           application, e.g., for Enhanced Zoning, before it can
+           respond successfully to the SSB.  On receipt of the
+           subsequent SSE, the lock is released.  For this usage, the
+           managing switch sends an Acquire Change Authorization (ACA)
+           request to other switches to lock the Fabric.
+
+           For some other applications, a managing switch locks the
+           Fabric using an Enhanced Acquire Change Authorization (EACA)
+           request, which identifies the application on whose behalf
+           the Fabric is being locked with an Application_ID.
+
+           Fabric locks can also be requested more directly, e.g.,
+           through the use of this MIB.  In these situations, the term
+           'managing' switch is used to indicate the switch that
+           receives such a request and executes it by issuing either
+           ACA or EACA requests to other switches in the Fabric.
+
+           This MIB module defines information about the 'managing'
+           switch for currently-active Fabric locks.
+
+           Copyright (C) The IETF Trust (2007).  This version
+           of this MIB module is part of RFC 4936;  see the RFC
+           itself for full legal notices."
+    REVISION  "200706270000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4936."
+    ::= { mib-2 159 }
+
+t11FLockMIBObjects       OBJECT IDENTIFIER ::= { t11FabricLockMIB 1 }
+t11FLockMIBConformance   OBJECT IDENTIFIER ::= { t11FabricLockMIB 2 }
+t11FLockMIBNotifications OBJECT IDENTIFIER ::= { t11FabricLockMIB 0 }
+t11FLockConfiguration    OBJECT IDENTIFIER ::= { t11FLockMIBObjects 1 }
+
+--
+-- The table of Managing Switches and their Fabric Locks
+--
+
+t11FLockTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FLockEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about the 'managing'
+           switch of each current Fabric lock, e.g., for the
+           types of Servers defined in FC-GS-5.
+
+           Each entry in this table represents either:
+
+           1) a current Fabric lock,
+           2) an in-progress attempt, requested via SNMP, to set up
+              a lock, or
+           3) a failed attempt, requested via SNMP, to set up a lock.
+
+           If an entry is created via t11FLockRowStatus, but the
+           attempt to obtain the lock fails, then the entry continues
+           to exist until it is deleted via t11FLockRowStatus, or
+           it is overwritten by the lock being established via
+           a means other than SNMP.  However, rows created via
+           t11FLockRowStatus are not retained over restarts."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, sections 4.9.5 and 6.4.10.2."
+    ::= { t11FLockConfiguration 1 }
+
+t11FLockEntry OBJECT-TYPE
+    SYNTAX       T11FLockEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information specific to a current
+           Fabric lock set up by a particular 'managing' switch on a
+           particular Fabric.  The 'managing switch' is identified by
+           values of fcmInstanceIndex and fcmSwitchIndex.
+
+           Server sessions for several different types of servers
+           are defined in FC-GS-5.  The behavior of a server with
+
+           respect to commands received within a server session is
+           specified for each type of server.  For some types,
+           parameter changes can only be made within the context of a
+           session, and the setting up of a session requires that the
+           Fabric be locked.  A Fabric is locked by one switch, called
+           the 'managing' switch, sending Acquire Change Authorization
+           (ACA) requests to all other switches in the Fabric.
+
+           For other applications, a Fabric lock is established by the
+           'managing' switch sending Enhanced Acquire Change
+           Authorization (EACA) requests to other switches in the
+           Fabric.  Each EACA request includes an Application_ID
+           value to identify the application requesting the lock.
+
+           For the benefit of this MIB module, a distinct value of
+           Application_ID has also been assigned/reserved (see
+           ANSI INCITS T11/06-679v0, titled 'FC-SW-5 Letter to
+           T11.5') as a means of distinguishing locks established via
+           Acquire Change Authorization (ACA) requests.  This
+           additional assignment allows an Application_ID to be used to
+           uniquely identify any active lock amongst all those
+           established by either an EACA or an ACA.
+
+           Whenever a Fabric is locked, by the sending of either an ACA
+           or an EACA, a row gets created in the representation of this
+           table for the 'managing' switch.
+
+           In order to process SNMP SetRequests that make parameter
+           changes for the relevant types of servers (e.g., to the
+           Zoning Database), the SNMP agent must get serialized access
+           to the Fabric (for the relevant type of management data),
+           i.e., the Fabric must be locked by creating an entry in
+           this table via an SNMP SetRequest.  Creating an entry in
+           this table via an SNMP SetRequest causes an ACA or an EACA
+           to be sent to all other switches in the Fabric.  The value
+           of t11FLockApplicationID for such an entry determines
+           whether an ACA or an EACA is sent.
+
+           If an entry in this table is created by an SNMP SetRequest,
+           the value of the t11FLockInitiatorType object in that entry
+           will normally be 'snmp'.  A row for which the value of
+           t11FLockInitiatorType is not 'snmp' cannot be modified
+           via SNMP.  In particular, it cannot be deleted via
+           t11FLockRowStatus.  Note that it's possible for a row to be
+           created by an SNMP SetRequest, but for the setup of the lock
+           to fail, and immediately thereafter be replaced by a lock
+           successfully set up by some other means; in such a case, the
+           value of t11FLockInitiatorType would change as and when the
+
+           lock was set up by the other means, and so the row could
+           not thereafter be deleted via t11FLockRowStatus.
+
+           FC-GS-5 mentions various error situations in which a
+           Fabric lock is released so as to avoid a deadlock.  In
+           such situations, the agent removes the corresponding row
+           in this table as and when the lock is released.  This can
+           happen for all values of t11FLockInitiatorType."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, sections 4.9.5.5 and 6.4.7.1.
+
+           Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, sections 6.1.17, 10.6.6, and 13.2,
+           and table 116.
+
+           'FC-SW-5 Letter to T11.5' ANSI INCITS T11/06-679v0,
+           http://www.t11.org/ftp/t11/pub/fc/sw-5/06-679v0.pdf,
+           21 September 2006."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FLockFabricIndex,
+              t11FLockApplicationID }
+    ::= { t11FLockTable 1 }
+
+T11FLockEntry ::= SEQUENCE {
+    t11FLockFabricIndex             T11FabricIndex,
+    t11FLockApplicationID           OCTET STRING,
+    t11FLockInitiatorType           INTEGER,
+    t11FLockInitiator               OCTET STRING,
+    t11FLockInitiatorIpAddrType     InetAddressType,
+    t11FLockInitiatorIpAddr         InetAddress,
+    t11FLockStatus                  INTEGER,
+    t11FLockRejectReasonCode        T11NsGs4RejectReasonCode,
+    t11FLockRejectReasonCodeExp     OCTET STRING,
+    t11FLockRejectReasonVendorCode  OCTET STRING,
+    t11FLockRowStatus               RowStatus
+}
+
+t11FLockFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A unique index value that uniquely identifies a
+           particular Fabric.
+
+           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
+           can operate within one (or more) physical infrastructures,
+           and this index value is used to uniquely identify a
+
+           particular (physical or virtual) Fabric within a physical
+           infrastructure.
+
+           In a Fabric conformant to versions earlier than FC-SW-4,
+           only a single Fabric could operate within a physical
+           infrastructure, and thus, the value of this Fabric Index
+           was defined to always be 1."
+    ::= { t11FLockEntry 1 }
+
+t11FLockApplicationID OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The Application_ID value that identifies the type of
+           application for which the Fabric is locked.
+
+           A lock established via Acquire Change Authorization (ACA)
+           does not, strictly speaking, have an Application_ID value.
+           However, the value 'FF'h (255 decimal) has been reserved
+           by T11 to be used as the value of this MIB object as and
+           when a lock is established by an ACA.  This value was
+           initially documented in a letter from the FC-SW-5 Editor
+           to T11.5, which was approved by the T11 and T11.5 plenary
+           meetings on October 5, 2006."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, Table 116.
+
+           'FC-SW-5 Letter to T11.5' ANSI INCITS T11/06-679v0,
+           http://www.t11.org/ftp/t11/pub/fc/sw-5/06-679v0.pdf,
+           21 September 2006."
+    ::= { t11FLockEntry 2 }
+
+t11FLockInitiatorType OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      other(1),
+                      ssb(2),
+                      cli(3),
+                      snmp(4)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This object specifies what type of initiator generated
+           the request that caused this lock to be established:
+
+               other     - none of the following.
+
+               ssb       - this lock was established due to the
+                           receipt of an SSB, e.g., from a GS-5
+                           client.
+               cli       - this lock was established in order
+                           to process a Command Line Interface
+                           (CLI) command.
+               snmp      - this lock was established as a result
+                           of an SNMP SetRequest.
+           "
+    ::= { t11FLockEntry 3 }
+
+t11FLockInitiator OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(0..64))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+           "This object specifies the initiator whose request
+           caused this lock to be established.
+
+           If the value of the corresponding instance
+           of t11FLockInitiatorType is 'ssb', this
+           object will contain the FC_ID of the client
+           that issued the Server Session Begin (SSB)
+           that required the lock to be established.
+
+           If the value of the corresponding instance
+           of t11FLockInitiatorType object is 'cli', this
+           object will contain the user name of the CLI
+           (Command Line Interface) user on whose behalf
+           the lock was established.
+
+           If the value of the corresponding instance of
+           t11FLockInitiatorType is 'snmp', this object
+           will contain the SNMP securityName used by the
+           SNMPv3 message containing the SetRequest that
+           created this row.  (If the row was created via
+           SNMPv1 or SNMPv2c, then the appropriate value of
+           the snmpCommunitySecurityName is used.)"
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 4.9.5.2.
+
+           SNMP securityName is defined in RFC 3411, 'An
+           Architecture for Describing Simple Network
+           Management Protocol (SNMP) Management Frameworks'.
+
+           snmpCommunitySecurityName is defined in RFC 3584,
+           'Coexistence between Version 1, Version 2, and
+
+           Version 3 of the Internet-standard Network
+           Management Framework.'"
+    ::= { t11FLockEntry 4 }
+
+t11FLockInitiatorIpAddrType OBJECT-TYPE
+    SYNTAX          InetAddressType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+           "This object specifies the type of IP address contained
+           in the corresponding instance of t11FLockInitiatorIpAddr.
+           If the IP address of the location of the initiator is
+           unknown or not applicable, this object has the value:
+           'unknown'."
+    ::= { t11FLockEntry 5 }
+
+t11FLockInitiatorIpAddr OBJECT-TYPE
+    SYNTAX          InetAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+           "This object specifies the IP address of the location
+           of the initiator that established this lock via a
+           request of the type given by the corresponding instance
+           of t11FLockInitiatorType.  In cases where the
+           corresponding instance of t11FLockInitiatorIpAddrType has
+           the value: 'unknown', the value of this object is the
+           zero-length string."
+    ::= { t11FLockEntry 6 }
+
+t11FLockStatus OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      active(1),
+                      settingUp(2),
+                      rejectFailure(3),
+                      otherFailure(4)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This object gives the current status of the lock:
+
+              'active'        -- the lock is currently established.
+              'settingUp'     -- the 'managing' switch is currently
+                                 attempting to set up the lock, e.g.,
+                                 it is waiting to receive Accepts
+                                 for ACAs from every switch in the
+                                 Fabric.
+
+              'rejectFailure' -- the 'managing' switch's attempt to
+                                 set up the lock was rejected with
+                                 the reason codes given by:
+                                    t11FLockRejectReasonCode,
+                                    t11FLockRejectReasonCodeExp and
+                                    t11FLockRejectReasonVendorCode.
+              'otherFailure'  -- the 'managing' switch's attempt
+                                 to set up the lock failed (but no
+                                 reason codes are available).
+
+           For values of t11FLockInitiatorType other than 'snmp',
+           a row is only required to be instantiated in this table
+           when the value of this object is 'active'.
+
+           If the value of the corresponding instance of
+           t11FLockInitiatorType is 'snmp', the initial value of this
+           object when the row is first created is 'settingUp'.  As
+           and when the setup succeeds, the value transitions to
+           'active'.  If the setup fails, the value transitions to
+           either 'rejectFailure' or 'otherFailure'.  Note that such a
+           failure value is overwritten on the next attempt to obtain
+           the lock, which could be immediately after the failure,
+           e.g., by a GS-5 client.
+
+           When the value of this object is 'rejectFailure', the
+           rejection's reason codes are given by the corresponding
+           values of t11FLockRejectReasonCode,
+           t11FLockRejectReasonCodeExp and
+           t11FLockRejectReasonVendorCode."
+    ::= { t11FLockEntry 7 }
+
+t11FLockRejectReasonCode OBJECT-TYPE
+    SYNTAX        T11NsGs4RejectReasonCode
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "When the value of the corresponding instance of
+           t11FLockStatus is 'rejectFailure', this object contains
+           the rejection's reason code."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 4.4.4 and table 10."
+    ::= { t11FLockEntry 8 }
+
+t11FLockRejectReasonCodeExp OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(0 | 1))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "When the value of the corresponding instance of
+           t11FLockStatus is 'rejectFailure', this object contains
+           the rejection's reason code explanation."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, sections 4.4.4 and 6.4.9,
+           tables 10 and 252."
+    ::= { t11FLockEntry 9 }
+
+t11FLockRejectReasonVendorCode OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(0 | 1))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "When the value of the corresponding instance of
+           t11FLockStatus is 'rejectFailure', this object contains
+           the rejection's vendor-specific code."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 4.4.4."
+    ::= { t11FLockEntry 10 }
+
+t11FLockRowStatus OBJECT-TYPE
+    SYNTAX        RowStatus
+    MAX-ACCESS    read-create
+    STATUS        current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+           A row in this table can be modified or deleted via
+           this object only when the row's value of
+           t11FLockInitiatorType is 'snmp'."
+    ::= { t11FLockEntry 11 }
+
+-- Conformance
+
+t11FLockMIBCompliances
+                     OBJECT IDENTIFIER ::= { t11FLockMIBConformance 1 }
+t11FLockMIBGroups    OBJECT IDENTIFIER ::= { t11FLockMIBConformance 2 }
+
+t11FLockMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+           "The compliance statement for entities that support
+           Fabric locks in support of GS-5 Server applications."
+    MODULE MANDATORY-GROUPS { t11FLockActiveGroup }
+
+    OBJECT       t11FLockRowStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+    ::= { t11FLockMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FLockActiveGroup OBJECT-GROUP
+    OBJECTS  { t11FLockInitiatorType,
+               t11FLockInitiator,
+               t11FLockInitiatorIpAddrType,
+               t11FLockInitiatorIpAddr,
+               t11FLockStatus,
+               t11FLockRejectReasonCode,
+               t11FLockRejectReasonCodeExp,
+               t11FLockRejectReasonVendorCode,
+               t11FLockRowStatus
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information
+           about current Fabric locks."
+    ::= { t11FLockMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-FSPF-MIB.mib b/snmp_builder/mibs/T11-FC-FSPF-MIB.mib
new file mode 100644
index 0000000..726e926
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-FSPF-MIB.mib
@@ -0,0 +1,1170 @@
+T11-FC-FSPF-MIB DEFINITIONS ::= BEGIN
+--
+-- For management of FSPF, the Fibre Channel routing protocol.
+--
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32, Unsigned32, TimeTicks,
+    Gauge32, mib-2                     FROM SNMPv2-SMI   -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                 FROM SNMPv2-CONF  -- [RFC2580]
+    TEXTUAL-CONVENTION, RowStatus, StorageType,
+    TruthValue                         FROM SNMPv2-TC    -- [RFC2579]
+    ifIndex, InterfaceIndex            FROM IF-MIB       -- [RFC2863]
+    fcmInstanceIndex, fcmSwitchIndex,
+    FcDomainIdOrZero                   FROM FC-MGMT-MIB  -- [FC-MGMT]
+    T11FabricIndex                     FROM T11-TC-MIB   -- [RFC4439]
+    t11FamConfigDomainId
+                       FROM T11-FC-FABRIC-ADDR-MGR-MIB;  -- [RFC4439]
+
+t11FcFspfMIB MODULE-IDENTITY
+    LAST-UPDATED "200608140000Z"
+    ORGANIZATION "T11"
+    CONTACT-INFO
+                   "Claudio DeSanti
+                    Cisco Systems, Inc.
+                    170 West Tasman Drive
+                    San Jose, CA 95134 USA
+                    EMail: cds@cisco.com
+
+                    Keith McCloghrie
+                    Cisco Systems, Inc.
+                    170 West Tasman Drive
+                    San Jose, CA USA 95134
+                    Email: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for managing the Fabric Shortest Path
+           First (FSPF) protocol.  FSPF is specified in FC-SW-4.
+
+           Copyright (C) The Internet Society (2006).  This version of
+           this MIB module is part of RFC 4626;  see the RFC itself for
+           full legal notices."
+    REVISION   "200608140000Z"
+    DESCRIPTION
+           "Initial version of this MIB module published as RFC4626."
+    ::= { mib-2 143 }
+
+t11FspfNotifications      OBJECT IDENTIFIER ::= { t11FcFspfMIB 0 }
+t11FspfObjects            OBJECT IDENTIFIER ::= { t11FcFspfMIB 1 }
+t11FspfConformance        OBJECT IDENTIFIER ::= { t11FcFspfMIB 2 }
+t11FspfConfiguration      OBJECT IDENTIFIER ::= { t11FspfObjects 1 }
+t11FspfDatabase           OBJECT IDENTIFIER ::= { t11FspfObjects 2 }
+
+--
+-- TEXTUAL CONVENTIONS
+
+T11FspfLsrType ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+           "Type of the Link State Record.
+
+           FC-SW-4 defines two types of LSRs and allows for the
+           possibility for more will be defined in the future:
+
+               01      - Switch Link Record
+               02      - Obsolete
+               240 - 255 - Vendor Specific
+               others  - Reserved.
+           "
+    REFERENCE
+           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+            ANSI INCITS 418-2006, section 6.1.9.3."
+    SYNTAX    Integer32 (0..255)
+
+T11FspfLinkType ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+           "Type of an the FSPF Link.  Presently defined values:
+
+               1           - Point-to-Point
+               240-255     - Vendor Specific
+               all others  - Reserved.
+           "
+    REFERENCE
+           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+           ANSI INCITS 418-2006, section 6.1.9.4."
+    SYNTAX    Integer32 (0..255)
+
+T11FspfInterfaceState ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+           "The state of the FSPF Neighbor Finite State Machine
+           for the neighbor (switch) on a particular interface.
+           Possible values are :
+
+                down(1)         - Down
+                init(2)         - Init
+                dbExchange(3)   - Database Exchange
+                dbAckwait(4)    - Database AckWait
+                dbWait(5)       - Database Wait
+                full(6)         - Full (Connected)
+           "
+    REFERENCE
+           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+           ANSI INCITS 418-2006, section 8.7."
+    SYNTAX  INTEGER {
+                   down(1),
+                   init(2),
+                   dbExchange(3),
+                   dbAckwait(4),
+                   dbWait(5),
+                   full(6)
+            }
+
+T11FspfLastCreationTime ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+           "This TC describes an object that stores the last time
+           it, and the row containing it, was created.
+
+           This can be used by management applications to determine
+           that a row has been deleted and re-created between reads,
+           causing an otherwise undetectable discontinuity in the
+           data."
+    SYNTAX  TimeTicks
+
+--
+-- t11FspfTable
+
+t11FspfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11FspfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "This table allows the users to configure and monitor FSPF's
+           per-Fabric parameters and statistics on all Fabrics known to
+           locally managed switches.
+
+           Entries are created/removed by the agent if and when
+           (Virtual) Fabrics are created/deleted."
+    ::= { t11FspfConfiguration 1 }
+
+t11FspfEntry OBJECT-TYPE
+    SYNTAX      T11FspfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "An entry containing FSPF variables, parameters, and
+           statistics on a particular switch (identified by values
+           of fcmInstanceIndex and fcmSwitchIndex) for a particular
+           Fabric (identified by a t11FspfFabricIndex value).
+
+           (Note that the local switch's per-fabric Domain-ID is
+           available in t11FamConfigDomainId, which is defined in
+           T11-FC-FABRIC-ADDR-MGR-MIB.)"
+    INDEX      { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex }
+    ::= { t11FspfTable 1 }
+
+T11FspfEntry ::= SEQUENCE  {
+    t11FspfFabricIndex                 T11FabricIndex,
+    t11FspfMinLsArrival                Unsigned32,
+    t11FspfMinLsInterval               Unsigned32,
+    t11FspfLsRefreshTime               Unsigned32,
+    t11FspfMaxAge                      Unsigned32,
+    t11FspfMaxAgeDiscards              Counter32,
+    t11FspfPathComputations            Counter32,
+    t11FspfChecksumErrors              Counter32,
+    t11FspfLsrs                        Gauge32,
+    t11FspfCreateTime                  T11FspfLastCreationTime,
+    t11FspfAdminStatus                 INTEGER,
+    t11FspfOperStatus                  INTEGER,
+    t11FspfNbrStateChangNotifyEnable   TruthValue,
+    t11FspfSetToDefault                INTEGER,
+    t11FspfStorageType                 StorageType
+
+}
+
+t11FspfFabricIndex OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "A unique index value that uniquely identifies a
+           particular Fabric.
+
+           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
+           can operate within one (or more) physical infrastructures.
+           In such a case, index value is used to uniquely identify a
+           particular Fabric within a physical infrastructure.
+
+           In a Fabric that has (can have) only a single Fabric
+           operating within the physical infrastructure, the
+           value of this Fabric Index will always be 1."
+    ::= { t11FspfEntry 1 }
+
+t11FspfMinLsArrival OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    UNITS       "milliSeconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "The minimum time after accepting a Link State Record
+           (LSR) on this Fabric before accepting another update of
+           the same LSR on the same Fabric.
+
+           An LSR update that is not accepted because of this time
+           interval is discarded."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, sections 8.6.4.5 & 15.1."
+    DEFVAL     {1000}
+    ::= { t11FspfEntry 2 }
+
+t11FspfMinLsInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    UNITS       "milliSeconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "The minimum time after this switch sends an LSR on this
+           Fabric before it will send another update of the same LSR
+           on the same Fabric."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, section 15.1."
+    DEFVAL     {5000}
+    ::= { t11FspfEntry 3 }
+
+t11FspfLsRefreshTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Minutes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The interval between transmission of refresh LSRs on this
+           Fabric."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, sections 8.5.1 & 15.1."
+    DEFVAL     {30}
+    ::= { t11FspfEntry 4 }
+
+t11FspfMaxAge OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Minutes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The maximum age an LSR will be retained in the FSPF
+           database on this Fabric.  An LSR is removed from the
+           database after MaxAge is reached."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, section 15.1."
+    DEFVAL     {60}
+    ::= { t11FspfEntry 5 }
+
+t11FspfMaxAgeDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of LSRs discarded due to their age reaching
+           t11FspfMaxAge in this Fabric.  The last discontinuity of
+           this counter is indicated by t11FspfCreateTime."
+    ::= { t11FspfEntry 6 }
+
+t11FspfPathComputations OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of times that the path computation algorithm
+           has been invoked by this Switch on this Fabric to compute
+           a set of minimum cost paths for this Fabric.  The last
+
+           discontinuity of this counter is indicated by
+           t11FspfCreateTime."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, section 8.1.1."
+    ::= { t11FspfEntry 7 }
+
+t11FspfChecksumErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of FSPF checksum errors that were detected
+           locally (and therefore discarded) on this Fabric.
+           The last discontinuity of this counter is indicated by
+           t11FspfCreateTime."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, section 8.5.4."
+    ::= { t11FspfEntry 8 }
+
+t11FspfLsrs OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The current number of entries for this Fabric in the
+           t11FspfLsrTable."
+    ::= { t11FspfEntry 9 }
+
+t11FspfCreateTime OBJECT-TYPE
+    SYNTAX      T11FspfLastCreationTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The value of sysUpTime when this entry was last created."
+    ::= { t11FspfEntry 10 }
+
+t11FspfAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    up(1),
+                    down(2)
+                    }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "The desired state of FSPF in this Fabric.  If value of
+           this object is set to 'up', then FSPF is enabled in
+           this Fabric.  If set to 'down', then FSPF is disabled
+           in this Fabric -- when FSPF is disabled, FSPF provides
+
+           no routes to be included in the T11-FC-ROUTE-MIB module.
+           (see the T11-FC-ROUTE-MIB)."
+    REFERENCE  "T11-FC-ROUTE-MIB, The Fibre Channel Routing
+                Information MIB, RFC4625."
+    DEFVAL {up}
+    ::= { t11FspfEntry 11 }
+
+t11FspfOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                      up(1),
+                      down(2)
+                     }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "State of FSPF in this Fabric.  If 't11FspfAdminStatus' is
+           'down', then the 't11FspfOperStatus' should be 'down'.
+           If 't11FspfAdminStatus' is changed to 'up', then
+           't11FspfOperStatus' should change to 'up' as and when
+           FSPF is active in this Fabric."
+    ::= { t11FspfEntry 12 }
+
+t11FspfNbrStateChangNotifyEnable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "Specifies whether or not the local agent should
+           issue the notification 't11FspfNbrStateChangNotify'
+           when the local switch learns of a change of state
+           in the FSPF Neighbor Finite State Machine on an
+           interface in this Fabric.
+           If the value of the object is 'true, then the
+           notification is generated.  If the value is 'false',
+           notification is not generated."
+    DEFVAL { false }
+    ::= { t11FspfEntry 13 }
+
+t11FspfSetToDefault OBJECT-TYPE
+    SYNTAX      INTEGER {
+                     default(1),
+                     noOp(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "Setting this value to 'default' changes the value of each
+           and every writable object in this row to its default
+
+           value.
+
+           No action is taken if this object is set to 'noOp'.
+           The value of the object, when read, is always 'noOp'."
+    ::= { t11FspfEntry 14 }
+
+t11FspfStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+           "The storage type for read-write objects in this
+           conceptual row.
+
+           Conceptual rows having the value 'permanent' need not
+           allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { t11FspfEntry 15 }
+
+--
+-- t11FspfIfTable
+
+t11FspfIfTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FspfIfEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table allows the users to configure and monitor
+           the FSPF parameters that are per-interface (identified
+           by a t11FspfIfIndex value), per-Fabric (identified by a
+           t11FspfFabricIndex value), and per-switch (identified by
+           values of fcmInstanceIndex and fcmSwitchIndex).
+
+           Creating a row in this table via t11FspfIfRowStatus
+           provides the means to specify non-default parameter value(s)
+           for an interface at a time when the relevant row in this
+           table would not otherwise exist because the interface is
+           either down or it is not an E_Port, but the corresponding
+           row in the t11FspfTable must already exist.
+
+           After the non-default values have been specified for a
+           port's parameters, they need to be retained in this table,
+           even when the port becomes 'isolated'.  However, having
+           unnecessary rows in this table clutters it up and makes
+           those rows that are useful harder for an NMS to find.
+           Therefore, when an E_Port becomes isolated, its row gets
+           deleted if and only if all of its parameter values are the
+           default values; also, when an E_Port becomes non-isolated
+
+           in a particular Fabric, a row in this table needs to exist
+           and is automatically created, if necessary.
+
+           The specific conditions for an automated/implicit deletion
+           of a row are:
+           a) if the corresponding interface is no longer an E_Port
+              (e.g., a G_Port which is dynamically determined to be an
+              F_Port), and all configurable parameters have default
+              values; or
+           b) if the interface identified by t11FspfIfIndex no longer
+              exists (e.g., because a line-card is physically removed);
+              or
+           c) if the corresponding row in the t11FspfTable is deleted.
+           "
+    ::= { t11FspfConfiguration 2 }
+
+t11FspfIfEntry OBJECT-TYPE
+    SYNTAX      T11FspfIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "An entry containing FSPF information for the interface
+           identified by t11FspfIfIndex, on the fabric identified
+           by t11FspfFabricIndex, on the switch identified by
+           fcmSwitchIndex."
+    INDEX       { fcmInstanceIndex, fcmSwitchIndex,
+                  t11FspfFabricIndex, t11FspfIfIndex }
+    ::= { t11FspfIfTable 1 }
+
+T11FspfIfEntry ::= SEQUENCE {
+    t11FspfIfIndex                     InterfaceIndex,
+    t11FspfIfHelloInterval             Unsigned32,
+    t11FspfIfDeadInterval              Unsigned32,
+    t11FspfIfRetransmitInterval        Unsigned32,
+    t11FspfIfInLsuPkts                 Counter32,
+    t11FspfIfInLsaPkts                 Counter32,
+    t11FspfIfOutLsuPkts                Counter32,
+    t11FspfIfOutLsaPkts                Counter32,
+    t11FspfIfOutHelloPkts              Counter32,
+    t11FspfIfInHelloPkts               Counter32,
+    t11FspfIfRetransmittedLsuPkts      Counter32,
+    t11FspfIfInErrorPkts               Counter32,
+    t11FspfIfNbrState                  T11FspfInterfaceState,
+    t11FspfIfNbrDomainId               FcDomainIdOrZero,
+    t11FspfIfNbrPortIndex              Unsigned32,
+    t11FspfIfAdminStatus               INTEGER,
+    t11FspfIfCreateTime                T11FspfLastCreationTime,
+    t11FspfIfSetToDefault              INTEGER,
+    t11FspfIfLinkCostFactor            Unsigned32,
+    t11FspfIfStorageType               StorageType,
+    t11FspfIfRowStatus                 RowStatus
+}
+
+t11FspfIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The value of ifIndex that identifies the local
+           Fibre Channel interface for which this entry
+           contains FSPF information."
+    ::= { t11FspfIfEntry 1 }
+
+t11FspfIfHelloInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    UNITS       "Seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "Interval between the periodic HELLO messages sent on this
+           interface in this Fabric to verify the link health.  Note
+           that this value must be same at both ends of a link in
+           this Fabric."
+    DEFVAL {20}
+    ::= { t11FspfIfEntry 2 }
+
+t11FspfIfDeadInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (2..65535)
+    UNITS       "Seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "Maximum time for which no HELLO messages can be received
+           on this interface in this Fabric.  After this time, the
+           interface is assumed to be broken and removed from the
+           database.  Note that this value must be greater than the
+           HELLO interval specified on this interface in this Fabric."
+    DEFVAL {80}
+    ::= { t11FspfIfEntry 3 }
+
+t11FspfIfRetransmitInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    UNITS       "Seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The time after which an unacknowledged LSR is
+           retransmitted on this interface in this Fabric."
+    DEFVAL {5}
+    ::= { t11FspfIfEntry 4 }
+
+t11FspfIfInLsuPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of Link State Update (LSU) packets received on
+           this interface in this Fabric.  The last discontinuity
+           of this counter is indicated by t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 5 }
+
+t11FspfIfInLsaPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of Link State Acknowledgement (LSA) packets
+           received on this interface in this Fabric.  The last
+           discontinuity of this counter is indicated by
+           t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 6 }
+
+t11FspfIfOutLsuPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of Link State Update (LSU) packets transmitted
+           on this interface in this Fabric.  The last
+           discontinuity of this counter is indicated by
+           t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 7 }
+
+t11FspfIfOutLsaPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of Link State Acknowledgement (LSA) packets
+           transmitted on this interface in this Fabric.  The
+           last discontinuity of this counter is indicated by
+           t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 8 }
+
+t11FspfIfOutHelloPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of HELLO packets transmitted on this interface in
+           this Fabric.  The last discontinuity of this counter is
+           indicated by t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 9 }
+
+t11FspfIfInHelloPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of HELLO packets received on this interface in
+           this Fabric.  The last discontinuity of this counter is
+           indicated by t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 10 }
+
+t11FspfIfRetransmittedLsuPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The number of LSU packets that contained one or more
+           retransmitted LSRs, and that were transmitted on this
+           interface in this Fabric.  The last discontinuity of
+           this counter is indicated by t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 11 }
+
+t11FspfIfInErrorPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of invalid FSPF control packets received on this
+           interface in this Fabric.  The last discontinuity of
+           this counter is indicated by t11FspfIfCreateTime."
+    ::= { t11FspfIfEntry 12 }
+
+t11FspfIfNbrState OBJECT-TYPE
+    SYNTAX      T11FspfInterfaceState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The state of FSPF's 'neighbor state machine', which is
+           the operational state of the interaction with the
+
+           neighbor's interface that is connected to this interface.
+
+           If the 't11FspfIfAdminStatus' is 'down', then this object
+           should be 'down'.  If the 't11FspfIfAdminStatus' is 'up',
+           then this object's value depends on the state of FSPF's
+           'neighbor state machine' on this interface in this
+           Fabric."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, section 8.7"
+    ::= { t11FspfIfEntry 13 }
+
+t11FspfIfNbrDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The Domain Id of the neighbor in this Fabric."
+    ::= { t11FspfIfEntry 14 }
+
+t11FspfIfNbrPortIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..16777215)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The index, as known by the neighbor, of the neighbor's
+           interface that is connected to this interface in this
+           Fabric."
+    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+               ANSI INCITS 418-2006, section 6.1.9.4."
+    ::= { t11FspfIfEntry 15 }
+
+t11FspfIfAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                up(1),
+                down(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The desired state of FSPF on this interface in this
+           Fabric, whenever 't11FspfAdminStatus' is 'up'.
+           If the value of this object is set to 'up', then FSPF is
+           enabled on this interface in this Fabric.  If set to
+           'down', then FSPF is disabled on this interface in this
+           Fabric.  Note that the operational state of FSPF on an
+           interface is given by t11FspfIfNbrState."
+    DEFVAL  {up}
+    ::= { t11FspfIfEntry 16 }
+
+t11FspfIfCreateTime OBJECT-TYPE
+    SYNTAX      T11FspfLastCreationTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The value of sysUpTime when this entry was last
+           created."
+    ::= { t11FspfIfEntry 17 }
+
+t11FspfIfSetToDefault OBJECT-TYPE
+    SYNTAX      INTEGER {
+                     default(1),
+                     noOp(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "Setting this value to 'default' changes the value of each
+           and every writable object in this row to its default
+           value.
+
+           If all the configuration parameters have their default
+           values, and if the interface is down, then the row is
+           deleted automatically.
+
+           No action is taken if this object is set to 'noOp'.
+           The value of the object, when read, is always 'noOp'."
+    ::= { t11FspfIfEntry 18 }
+
+t11FspfIfLinkCostFactor OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The administrative factor used in calculating the cost
+           of sending a frame on this interface in this Fabric.
+
+           The formula used to calculate the link cost is:
+
+                    Link Cost = S * (1.0625e12 / ifSpeed)
+           where:
+             S = (the value of this object / 100)
+             ifSpeed = interface speed (as defined in the IF-MIB).
+           "
+    REFERENCE
+           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+            ANSI INCITS 418-2006, section 8.5.5; and
+            IF-MIB, RFC 2863."
+    DEFVAL { 100 }
+    ::= { t11FspfIfEntry 19 }
+
+t11FspfIfStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The storage type for this conceptual row.
+            Conceptual rows having the value 'permanent' need not
+            allow write-access to any columnar objects in the row."
+       DEFVAL { nonVolatile }
+    ::= { t11FspfIfEntry 20 }
+
+t11FspfIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of the conceptual row.
+
+           This object can be used to create an entry only if there
+           is an entry in the t11FspfTable for the corresponding
+           Fabric, and if the interface is either isolated or is a
+           non-E_port.
+
+           Setting this object to 'destroy' will typically fail;
+           to reverse the creation process, set the corresponding
+           instance of t11FspfIfSetToDefault to 'default'."
+    ::= { t11FspfIfEntry 21 }
+
+--
+-- t11FspfLsrTable
+
+t11FspfLsrTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FspfLsrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table is the database of all the latest
+           incarnations of the Link State Records (LSRs) that
+           are currently contained in the topology database,
+           for all interfaces on all Fabrics known to
+           locally managed switches.
+
+           A Fabric's topology database contains the LSRs that
+           have been either issued or received by a local switch on
+           that Fabric, and that have not reached t11FspfMaxAge."
+    ::= { t11FspfDatabase 1 }
+
+t11FspfLsrEntry OBJECT-TYPE
+    SYNTAX      T11FspfLsrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "This gives information for the most recent update of an
+           LSR.  There is one entry for every LSR issued or received
+           by a locally managed switch (identified by
+           fcmInstanceIndex and fcmSwitchIndex) in a Fabric
+           (identified by t11FspfFabricIndex)."
+    INDEX      { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex,
+                 t11FspfLsrDomainId, t11FspfLsrType }
+    ::= { t11FspfLsrTable 1 }
+
+T11FspfLsrEntry ::= SEQUENCE {
+    t11FspfLsrDomainId           FcDomainIdOrZero,
+    t11FspfLsrType               T11FspfLsrType,
+    t11FspfLsrAdvDomainId        FcDomainIdOrZero,
+    t11FspfLsrAge                Unsigned32,
+    t11FspfLsrIncarnationNumber  Unsigned32,
+    t11FspfLsrCheckSum           Unsigned32,
+    t11FspfLsrLinks              Unsigned32
+}
+
+t11FspfLsrDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "Domain Id of the LSR owner in this Fabric.  It is the
+           Link State Id of this LSR."
+    ::= { t11FspfLsrEntry 1 }
+
+t11FspfLsrType OBJECT-TYPE
+    SYNTAX      T11FspfLsrType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "Type of this LSR."
+    ::= { t11FspfLsrEntry 2 }
+
+t11FspfLsrAdvDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Domain Id of the switch that is advertising the LSR on
+           the behalf of the switch owning it."
+    ::= { t11FspfLsrEntry 3 }
+
+t11FspfLsrAge OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    UNITS       "Seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The time since this LSR was inserted into the database."
+    ::= { t11FspfLsrEntry 4 }
+
+t11FspfLsrIncarnationNumber OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The link state incarnation number of this LSR.  This is
+           used to identify most recent instance of an LSR while
+           updating the topology database when an LSR is received.
+           The updating of an LSR includes incrementing its
+           incarnation number prior to transmission of the updated
+           LSR.  So, the most recent LSR is the one with the
+           largest incarnation number."
+    ::= { t11FspfLsrEntry 5 }
+
+t11FspfLsrCheckSum OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The checksum of the LSR."
+    ::= { t11FspfLsrEntry 6 }
+
+t11FspfLsrLinks OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65355)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "Number of entries in the t11FspfLinkTable associated with
+           this LSR."
+    ::= { t11FspfLsrEntry 7 }
+--
+-- t11FspfLinkTable
+
+t11FspfLinkNumber  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of rows in the t11FspfLinkTable."
+        ::= { t11FspfDatabase 3 }
+
+t11FspfLinkTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FspfLinkEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table contains the list of Inter-Switch Links and
+           their information that is part of an LSR, either
+           received or transmitted."
+    ::= { t11FspfDatabase 4 }
+
+t11FspfLinkEntry OBJECT-TYPE
+    SYNTAX      T11FspfLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "An entry that contains information about a link
+           contained in an LSR in this Fabric.  An entry is created
+           whenever a new link appears in an (issued or received)
+           LSR.  An entry is deleted when a link no longer appears
+           in an (issued or received) LSR."
+    INDEX      { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex,
+                 t11FspfLsrDomainId, t11FspfLsrType, t11FspfLinkIndex}
+    ::= { t11FspfLinkTable 1 }
+
+T11FspfLinkEntry ::= SEQUENCE {
+    t11FspfLinkIndex             Unsigned32,
+    t11FspfLinkNbrDomainId       FcDomainIdOrZero,
+    t11FspfLinkPortIndex         Unsigned32,
+    t11FspfLinkNbrPortIndex      Unsigned32,
+    t11FspfLinkType              T11FspfLinkType,
+    t11FspfLinkCost              Integer32
+}
+
+t11FspfLinkIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "An arbitrary index of this link."
+    ::= { t11FspfLinkEntry 1 }
+
+t11FspfLinkNbrDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The Domain Id of the neighbor on the other end of this
+           link in this Fabric."
+    ::= { t11FspfLinkEntry 2 }
+
+t11FspfLinkPortIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..16777215)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The source E_port of this link, as indicated by the index
+           value in the LSR received from the switch identified by
+           't11FspfLsrDomainId'."
+    ::= { t11FspfLinkEntry 3 }
+
+t11FspfLinkNbrPortIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..16777215)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The destination E_port of this link, as indicated by the
+           index value in the LSR received from the switch identified
+           by 't11FspfLinkNbrDomainId'."
+    ::= { t11FspfLinkEntry 4 }
+
+t11FspfLinkType OBJECT-TYPE
+    SYNTAX      T11FspfLinkType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The type of this link."
+    ::= { t11FspfLinkEntry 5 }
+
+t11FspfLinkCost OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The cost of sending a frame on this link in this Fabric.
+           Link cost is calculated using the formula:
+
+                 link cost = S * (1.0625e12 / Signalling Rate)
+
+           For issued LSRs, S is determined by the value of
+           t11FspfIfLinkCostFactor for the corresponding interface
+
+           and Fabric."
+    ::= { t11FspfLinkEntry 6 }
+
+--
+-- Notification-related object
+
+t11FspfIfPrevNbrState OBJECT-TYPE
+    SYNTAX      T11FspfInterfaceState
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION
+           "The previous state of FSPF's Neighbor Finite State
+           Machine on an interface.
+
+           This object is only used in the
+           't11FspfNbrStateChangNotify' notification."
+    ::= { t11FspfConfiguration 3 }
+
+--
+-- Notifications
+
+t11FspfNbrStateChangNotify NOTIFICATION-TYPE
+    OBJECTS     { ifIndex,
+                  t11FamConfigDomainId,
+                  t11FspfIfNbrDomainId,
+                  t11FspfIfNbrState,
+                  t11FspfIfPrevNbrState
+    }
+    STATUS      current
+    DESCRIPTION
+           "This notification signifies that there has been a change in
+           the state of an FSPF neighbor.  This is generated when the
+           FSPF state changes to a terminal state, through either
+           regression (i.e., goes from Full to Init or Down) or
+           progression (i.e., from any state to Full).  The value of
+           't11FspfIfNbrState' is the state of the neighbor after the
+           change."
+    ::= { t11FspfNotifications 1 }
+
+--
+-- Conformance
+
+t11FspfMIBCompliances
+    OBJECT IDENTIFIER ::= { t11FspfConformance 1 }
+
+t11FspfMIBGroups
+    OBJECT IDENTIFIER ::= { t11FspfConformance 2 }
+
+t11FspfMIBCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "The compliance statement for entities that
+           implement the FSPF."
+    MODULE -- this module
+        MANDATORY-GROUPS { t11FspfGeneralGroup,
+                           t11FspfIfGroup,
+                           t11FspfDatabaseGroup,
+                           t11FspfNotificationGroup }
+
+        GROUP      t11FspfIfCounterGroup
+        DESCRIPTION
+               "These counters, for particular FSPF-packet
+               occurrences on an interface, are mandatory only
+               for those systems that count such events."
+
+        OBJECT     t11FspfIfRowStatus
+        SYNTAX     INTEGER { active(1) }
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required, so only
+               one value needs to be supported."
+
+        OBJECT     t11FspfIfStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfNbrStateChangNotifyEnable
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfMinLsArrival
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfMinLsInterval
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfAdminStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfSetToDefault
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfIfHelloInterval
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfIfDeadInterval
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfIfRetransmitInterval
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfIfAdminStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfIfSetToDefault
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FspfIfLinkCostFactor
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { t11FspfMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FspfGeneralGroup OBJECT-GROUP
+    OBJECTS  { t11FspfMinLsArrival,
+               t11FspfMinLsInterval,
+               t11FspfLsRefreshTime,
+               t11FspfMaxAge,
+               t11FspfMaxAgeDiscards,
+               t11FspfPathComputations,
+               t11FspfChecksumErrors,
+               t11FspfLsrs,
+               t11FspfCreateTime,
+               t11FspfAdminStatus,
+               t11FspfOperStatus,
+               t11FspfNbrStateChangNotifyEnable,
+               t11FspfSetToDefault,
+               t11FspfStorageType }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for displaying and
+           configuring FSPF parameters."
+    ::= { t11FspfMIBGroups 1 }
+
+t11FspfIfGroup OBJECT-GROUP
+    OBJECTS  { t11FspfIfHelloInterval,
+               t11FspfIfDeadInterval,
+               t11FspfIfRetransmitInterval,
+               t11FspfIfNbrState,
+               t11FspfIfNbrDomainId,
+               t11FspfIfNbrPortIndex,
+               t11FspfIfAdminStatus,
+               t11FspfIfCreateTime,
+               t11FspfIfSetToDefault,
+               t11FspfIfLinkCostFactor,
+               t11FspfIfRowStatus,
+               t11FspfIfStorageType,
+               t11FspfIfPrevNbrState }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for displaying the FSPF
+           interface information."
+    ::= { t11FspfMIBGroups 2 }
+
+t11FspfIfCounterGroup OBJECT-GROUP
+    OBJECTS  { t11FspfIfInLsuPkts,
+               t11FspfIfInLsaPkts,
+               t11FspfIfOutLsuPkts,
+               t11FspfIfOutLsaPkts,
+               t11FspfIfOutHelloPkts,
+               t11FspfIfInHelloPkts,
+               t11FspfIfRetransmittedLsuPkts,
+               t11FspfIfInErrorPkts  }
+    STATUS   current
+    DESCRIPTION
+            "A collection of objects for counting particular
+            FSPF-packet occurrences on an interface."
+    ::= { t11FspfMIBGroups 3 }
+
+t11FspfDatabaseGroup OBJECT-GROUP
+    OBJECTS  { t11FspfLsrAdvDomainId,
+               t11FspfLsrAge,
+               t11FspfLsrIncarnationNumber,
+               t11FspfLsrCheckSum,
+               t11FspfLsrLinks,
+               t11FspfLinkNbrDomainId,
+               t11FspfLinkPortIndex,
+               t11FspfLinkNbrPortIndex,
+               t11FspfLinkType,
+               t11FspfLinkCost,
+               t11FspfLinkNumber }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for displaying the FSPF
+           topology database information."
+    ::= { t11FspfMIBGroups 4 }
+t11FspfNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS  { t11FspfNbrStateChangNotify }
+    STATUS   current
+    DESCRIPTION
+           "A collection of notifications for FSPF."
+    ::= { t11FspfMIBGroups 5 }
+END
diff --git a/snmp_builder/mibs/T11-FC-NAME-SERVER-MIB.mib b/snmp_builder/mibs/T11-FC-NAME-SERVER-MIB.mib
new file mode 100644
index 0000000..7a18e93
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-NAME-SERVER-MIB.mib
@@ -0,0 +1,1136 @@
+T11-FC-NAME-SERVER-MIB DEFINITIONS ::= BEGIN
+
+-- The MIB for management of the Fibre Channel functionality which
+-- implements the Name Server function.
+
+IMPORTS
+    MODULE-IDENTITY,OBJECT-TYPE,
+    NOTIFICATION-TYPE, Unsigned32,
+    Counter32, Integer32, mib-2   FROM SNMPv2-SMI         -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP            FROM SNMPv2-CONF        -- [RFC2580]
+    SnmpAdminString               FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
+    TruthValue, TEXTUAL-CONVENTION,
+    TimeStamp                     FROM SNMPv2-TC          -- [RFC2579]
+    fcmInstanceIndex, FcPortType,
+    FcAddressIdOrZero, FcClasses,
+    FcNameIdOrZero                FROM FC-MGMT-MIB        -- [FC-MGMT]
+    T11FabricIndex                FROM T11-TC-MIB      -- [FC-FAM-MIB]
+    t11FamLocalSwitchWwn
+                      FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [FC-FAM-MIB]
+
+t11FcNameServerMIB  MODULE-IDENTITY
+    LAST-UPDATED "200603020000Z"
+    ORGANIZATION "T11"
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Phone: +1 408 853-9172
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA USA 95134
+                  Phone: +1 408-526-5260
+                  EMail: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for the management of the functionality,
+           which realizes the FC-GS-4 requirements for Name
+           Server (NS).
+
+           Copyright (C) The Internet Society (2006).  This version of
+           this MIB module is part of RFC 4438; see the RFC itself for
+           full legal notices."
+
+    REVISION    "200603020000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4438."
+    ::= { mib-2 135 }
+
+t11NsNotifications    OBJECT IDENTIFIER ::= { t11FcNameServerMIB 0 }
+t11NsMIBObjects       OBJECT IDENTIFIER ::= { t11FcNameServerMIB 1 }
+t11NsMIBConformance   OBJECT IDENTIFIER ::= { t11FcNameServerMIB 2 }
+t11NsStatus           OBJECT IDENTIFIER ::= { t11NsMIBObjects 1 }
+t11NsStatistics       OBJECT IDENTIFIER ::= { t11NsMIBObjects 2 }
+
+-- Textual Conventions
+
+T11NsGs4RejectReasonCode ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+        "The FC-GS-4 reject reason code for a request.
+
+         none(1)
+             - no error.
+         invalidCmdCode(2)
+             - request contained an invalid command code.
+         invalidVerLevel(3)
+             - request contained an invalid version number.
+         logicalError(4)
+             - there was a logical error.
+         invalidIUSize(5)
+             - the CT_IU (Information Unit) size was invalid.
+         logicalBusy(6)
+             - the module is busy.
+         protocolError(7)
+             - there was a protocol error.
+         unableToPerformCmdReq(8)
+             - the command specified in the req could not be
+               executed.  The details of exactly what failed
+               will be in the corresponding reason code
+               explanation.
+         cmdNotSupported(9)
+             - the command is not supported.
+         serverNotAvailable(10)
+             - the identified server was not available.
+         couldNotEstabSession(11)
+             - a server session could not be established.
+         vendorError(12)
+             - a vendor-specific error."
+    REFERENCE
+          "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4), section 4.4.3."
+    SYNTAX  INTEGER {
+              none(1),
+              invalidCmdCode(2),
+              invalidVerLevel(3),
+              logicalError(4),
+              invalidIUSize(5),
+              logicalBusy(6),
+              protocolError(7),
+              unableToPerformCmdReq(8),
+              cmdNotSupported(9),
+              serverNotAvailable(10),
+              couldNotEstabSession(11),
+              vendorError(12)
+            }
+
+T11NsRejReasonCodeExpl ::= TEXTUAL-CONVENTION
+    STATUS    current
+    DESCRIPTION
+        "The reject reason code explanation:
+
+         noAdditionalExplanation(1)
+             - no additional explanation.
+         portIdentifierNotRegistered(2)
+             - Port Identifier not registered.
+         portNameNotRegistered(3)
+             - Port Name not registered.
+         nodeNameNotRegistered(4)
+             - Node Name not registered.
+         classOfServiceNotRegistered(5)
+             - Class of Service not registered.
+         nodeIpAddressNotRegistered(6)
+             - 'IP Address (Node)' value not registered.
+         ipaNotRegistered(7)
+             - Initial Process Associator (IPA) not registered.
+         fc4TypeNotRegistered(8)
+             - FC-4 TYPEs not registered.
+         symbolicPortNameNotRegistered(9)
+             - Symbolic Port Name not registered.
+         symbolicNodeNameNotRegistered(10)
+             - Symbolic Node Name not registered.
+         portTypeNotRegistered(11)
+             - 'Port Type' not registered.
+         portIpAddressNotRegistered(12)
+             - 'IP Address (Port)' value not registered.
+         fabricPortNameNotRegistered(13)
+             - Fabric Port Name not registered.
+         hardAddressNotRegistered(14)
+             - 'Hard Address' not registered.
+
+         fc4DescriptorNotRegistered(15)
+             - FC-4 Descriptor not registered.
+         fc4FeaturesNotRegistered(16)
+             - FC-4 Features not registered.
+         accessDenied(17)
+             - Access denied.
+         unacceptablePortIdentifier(18)
+             - Unacceptable Port Identifier.
+         databaseEmpty(19)
+             - Database is empty.
+         noObjectRegInSpecifiedScope(20)
+             - no object has been registered in the specified
+               scope.
+         domainIdNotPresent(21)
+             - Domain ID not present.
+         portIdNotPresent(22)
+             - Port number not present.
+         noDeviceAttached(23)
+             - No device attached.
+         authorizationException(24)
+             - Authorization Exception.
+         authenticationException(25)
+             - Authentication Exception.
+         databaseFull(26)
+             - Database full."
+    REFERENCE
+          "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4), sections 4.4.4 and 5.2.4"
+    SYNTAX  INTEGER {
+              noAdditionalExplanation(1),
+              portIdentifierNotRegistered(2),
+              portNameNotRegistered(3),
+              nodeNameNotRegistered(4),
+              classOfServiceNotRegistered(5),
+              nodeIpAddressNotRegistered(6),
+              ipaNotRegistered(7),
+              fc4TypeNotRegistered(8),
+              symbolicPortNameNotRegistered(9),
+              symbolicNodeNameNotRegistered(10),
+              portTypeNotRegistered(11),
+              portIpAddressNotRegistered(12),
+              fabricPortNameNotRegistered(13),
+              hardAddressNotRegistered(14),
+              fc4DescriptorNotRegistered(15),
+              fc4FeaturesNotRegistered(16),
+              accessDenied(17),
+              unacceptablePortIdentifier(18),
+              databaseEmpty(19),
+              noObjectRegInSpecifiedScope(20),
+              domainIdNotPresent(21),
+              portIdNotPresent(22),
+              noDeviceAttached(23),
+              authorizationException(24),
+              authenticationException(25),
+              databaseFull(26)
+           }
+
+--
+-- Information about a Name Server Information Subset
+--
+
+t11NsInfoSubsetTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF T11NsInfoSubsetEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "This table contains one entry for each Name Server
+           Information Subset within each Fibre Channel
+           management instance."
+    ::= { t11NsStatus 1 }
+
+t11NsInfoSubsetEntry OBJECT-TYPE
+    SYNTAX        T11NsInfoSubsetEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "This entry contains information about operations
+           on a particular Name Server Information Subset
+           within the Fibre Channel management instance
+           identified by fcmInstanceIndex."
+    INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex }
+    ::= { t11NsInfoSubsetTable 1 }
+
+T11NsInfoSubsetEntry ::= SEQUENCE {
+    t11NsInfoSubsetIndex                 Unsigned32,
+    t11NsInfoSubsetSwitchIndex           Unsigned32,
+    t11NsInfoSubsetTableLastChange       TimeStamp,
+    t11NsInfoSubsetNumRows               Integer32,
+    t11NsInfoSubsetTotalRejects          Counter32,
+    t11NsInfoSubsetRejReqNotfyEnable     TruthValue
+}
+
+t11NsInfoSubsetIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..4294967295)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An arbitrary integer value that uniquely identifies
+           this Name Server Information Subset amongst all others
+           within the same Fibre Channel management instance.
+
+           It is mandatory to keep this value constant between
+           restarts of the agent and to make every possible
+           effort to keep it constant across such restarts."
+    ::= { t11NsInfoSubsetEntry 1 }
+
+t11NsInfoSubsetSwitchIndex OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..4294967295)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The value of this object is zero when operations
+           upon this Name Server Information Subset do not occur
+           at a local Fibre Channel switch; otherwise, it is
+           non-zero and identifies the local switch.
+
+           The switch identified by a non-zero value of this
+           object is the same switch as is identified by the
+           same value of fcmSwitchIndex."
+    REFERENCE
+           "fcmSwitchIndex is defined in the FC-MGMT-MIB module"
+    ::= { t11NsInfoSubsetEntry 2 }
+
+t11NsInfoSubsetTableLastChange OBJECT-TYPE
+    SYNTAX        TimeStamp
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The value of sysUpTime at the time of the last update
+           to any entry in the t11NsRegTable with the same values
+           of fcmInstanceIndex and t11NsInfoSubsetIndex.  This
+           includes creation of an entry, deletion of an entry, or
+           modification of an existing entry.  If no such update
+           has taken place since the last re-initialization of the
+           local network management subsystem, then this object
+           contains a zero value."
+    ::= { t11NsInfoSubsetEntry 3 }
+
+t11NsInfoSubsetNumRows OBJECT-TYPE
+    SYNTAX        Integer32 (0..2147483647)
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The number of Nx_Ports currently registered in this
+
+           Name Server Information Subset, i.e., the number of
+           rows in the t11NsRegTable with the same values of
+           fcmInstanceIndex and t11NsInfoSubsetIndex."
+    ::= { t11NsInfoSubsetEntry 4 }
+
+t11NsInfoSubsetTotalRejects OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of (CT_IU) Requests for Name Server
+           functions that were rejected for inclusion in this
+           Name Server Information Subset, across all Fabrics
+           for which it contains information.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsInfoSubsetEntry 5 }
+
+t11NsInfoSubsetRejReqNotfyEnable OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+           "This object indicates whether 't11NsRejectRegNotify'
+           notifications are generated by rejections of requests
+           to register information in this Name Server Information
+           Subset.
+
+           If value of this object is 'true', then the
+           notification is generated when a request is rejected.
+           If it is 'false', the notification is not generated.
+
+           The persistence of values of this object across an
+           agent reboot is implementation-dependent."
+    DEFVAL { false }
+    ::= { t11NsInfoSubsetEntry 6 }
+
+--
+-- Registered Port Information
+--
+
+t11NsRegTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF T11NsRegEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "This table contains entries for all Nx_Ports registered
+
+           in the identified Name Server Information Subsets across
+           all Fabrics for which such subsets contain information."
+    ::= { t11NsStatus 2 }
+
+t11NsRegEntry OBJECT-TYPE
+    SYNTAX T11NsRegEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An entry containing information about an Nx_Port
+           represented by t11NsRegPortIdentifier that is registered
+           with a Name Server Information Subset (identified by
+           t11NsInfoSubsetIndex) within the Fibre Channel management
+           instance (identified by fcmInstanceIndex) on the Fabric
+           (identified by t11NsRegFabricIndex)."
+    INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
+            t11NsRegFabricIndex, t11NsRegPortIdentifier }
+    ::= { t11NsRegTable 1 }
+
+T11NsRegEntry ::= SEQUENCE {
+    t11NsRegFabricIndex            T11FabricIndex,
+    t11NsRegPortIdentifier         FcAddressIdOrZero,
+    t11NsRegPortName               FcNameIdOrZero,
+    t11NsRegNodeName               FcNameIdOrZero,
+    t11NsRegClassOfSvc             FcClasses,
+    t11NsRegNodeIpAddress          OCTET STRING,
+    t11NsRegProcAssoc              OCTET STRING,
+    t11NsRegFc4Type                OCTET STRING,
+    t11NsRegPortType               FcPortType,
+    t11NsRegPortIpAddress          OCTET STRING,
+    t11NsRegFabricPortName         FcNameIdOrZero,
+    t11NsRegHardAddress            FcAddressIdOrZero,
+    t11NsRegSymbolicPortName       SnmpAdminString,
+    t11NsRegSymbolicNodeName       SnmpAdminString,
+    t11NsRegFc4Features            OCTET STRING
+    }
+
+t11NsRegFabricIndex OBJECT-TYPE
+    SYNTAX               T11FabricIndex
+    MAX-ACCESS           not-accessible
+    STATUS               current
+    DESCRIPTION
+           "A unique index value that uniquely identifies a
+           particular Fabric.
+
+           In a Fabric conformant to SW-3, only a single Fabric can
+           operate within a single physical infrastructure, and thus,
+           the value of this Fabric Index will always be 1.
+
+           However, it is possible that future standards will define
+           how multiple Fabrics, each with its own management
+           instrumentation, could operate within one (or more) physical
+           infrastructures.  To allow for this future possibility, this
+           index value is used to uniquely identify a particular
+           Fabric within a physical infrastructure."
+    ::= { t11NsRegEntry 1 }
+
+t11NsRegPortIdentifier OBJECT-TYPE
+    SYNTAX               FcAddressIdOrZero
+    MAX-ACCESS           not-accessible
+    STATUS               current
+    DESCRIPTION
+           "The Fibre Channel Address Identifier of this Nx_Port.
+           If no Port Identifier has been registered, then the
+           value of this object is the zero-length string."
+    ::= { t11NsRegEntry 2 }
+
+t11NsRegPortName OBJECT-TYPE
+    SYNTAX        FcNameIdOrZero
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The Port_Name (WWN) of this Nx_Port.
+           If this object has not been registered, then its value
+           is the zero-length string."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 3 }
+
+t11NsRegNodeName OBJECT-TYPE
+    SYNTAX        FcNameIdOrZero
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The Node_Name (WWN) of this Nx_Port.
+           If this object has not been registered, then its value
+           is the zero-length string."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 4 }
+
+t11NsRegClassOfSvc OBJECT-TYPE
+    SYNTAX        FcClasses
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The class of service indicator.  This object is an
+           array of bits that contain a bit map of the classes of
+           service supported by the associated port.  If a bit in
+
+           this object is 1, it indicates that the class of
+           service is supported by the associated port.  When a
+           bit is set to 0, it indicates that no class of service
+           is supported by this Nx_Port.
+
+           If this object has not been not registered for a port,
+           then the instance for that port is not instantiated."
+    ::= { t11NsRegEntry 5 }
+
+t11NsRegNodeIpAddress OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0 | 16))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The IP address of the node of this Nx_Port, in
+           network-byte order, either as a 32-bit IPv4 address or
+           a 128-bit IPv6 address.  For the former, the leftmost 96 bits
+           (12 bytes) should contain x'00 00 00 00 00 00 00 00 00 00 FF
+           FF', and the IPv4 address should be present in the rightmost
+           32 bits.
+
+           Note that the value of this object is the IP address value
+           that is received in the FC-GS-4 message Register IP address
+           (Node) RIP_NN.  It is not validated against any IP address
+           format.
+
+           If no 'IP address (Node)' has been registered, then the
+           value of this object is the zero-length string."
+    REFERENCE
+          "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4)"
+    DEFVAL  { ''H }
+    ::= { t11NsRegEntry 6 }
+
+t11NsRegProcAssoc OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0 | 8))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The Fibre Channel Initial Process Associator (IPA).
+
+           If no 'Initial Process Associator' has been registered,
+           then the value of this object is the zero-length string."
+    REFERENCE
+          "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4)"
+    DEFVAL  { ''H }
+    ::= { t11NsRegEntry 7 }
+
+t11NsRegFc4Type OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0 | 32))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The FC-4 protocol types supported by this Nx_Port.
+           This is an array of 256 bits.  Each bit in the array
+           corresponds to a Type value as defined by Fibre Channel
+           standards and contained in the Type field of the frame
+           header.  The order of the bits in the 256-bit (32-byte)
+           value is the same as defined in FC-GS-4, section 5.2.3.8,
+           and represented in network-byte order.
+
+           If no 'FC-4 TYPEs' has been registered, then the
+           value of this object is the zero-length string."
+    REFERENCE
+           "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4), section 5.2.3.8."
+    DEFVAL  { ''H }
+    ::= { t11NsRegEntry 8 }
+
+t11NsRegPortType OBJECT-TYPE
+    SYNTAX        FcPortType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The port type of this port.
+
+           If no 'Port Type' has been registered, then the value
+           of this object is unidentified and is represented by
+           the value 'unknown'."
+    DEFVAL  { 1 }                -- 'unknown', see [FC-MGMT]
+    ::= { t11NsRegEntry 9 }
+
+t11NsRegPortIpAddress OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0 | 16))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The value that Fibre Channel calls an 'IP Address (Port)'
+           that represents the IP address of the associated port.
+           The value is either in 32-bit IPv4 format or 128-bit IPv6
+           format, in network-byte order.  When this object contains an
+           IPv4 address, the leftmost 96 bits (12 bytes) should contain
+           x'00 00 00 00 00 00 00 00 00 00 FF FF'.  The IPv4 address
+           should be present in the rightmost 32 bits.
+
+           Note that the value of this object is the IP address value
+
+           that is received in the FC-GS-4 message Register IP address
+           (Port) RIPP_ID.  It is not validated against any IP address
+           format.
+
+           If no 'IP address (Port)' has been registered, then the
+           value of this object is the zero-length string."
+    REFERENCE
+           "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4, (FC-GS-4)"
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 10 }
+
+t11NsRegFabricPortName OBJECT-TYPE
+    SYNTAX        FcNameIdOrZero
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The Fabric Port Name (WWN) of the Fx_Port to which
+           this Nx_Port is attached.
+
+           If no 'Fabric Port Name' has been registered, then the
+           value of this object is the zero-length string."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 11 }
+
+t11NsRegHardAddress OBJECT-TYPE
+    SYNTAX        FcAddressIdOrZero
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The format of this object is identical to the format
+           of Hard Address defined in the Discover Address (ADISC)
+           Extended Link Service (FC-FS).
+
+           Hard Address is the 24-bit NL_Port identifier that
+           consists of:
+             - the 8-bit Domain_ID in the most significant byte
+             - the 8-bit Area_ID in the next most significant
+               byte
+             - the 8-bit AL-PA (Arbitrated Loop Physical Address)
+               which an NL_Port attempts acquire during FC-AL
+               initialization in the least significant byte.
+
+           If the port is not an NL_Port, or if it is an NL_Port
+           but does not have a hard address, then all bits are
+           reported as zeros.
+
+           If no 'Hard Address' has been registered, then the
+
+           value of this object is the zero-length string."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 12 }
+
+t11NsRegSymbolicPortName OBJECT-TYPE
+    SYNTAX        SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The user-defined name of this port.
+
+           If no 'Symbolic Port Name' has been registered, then
+           the value of this object is the zero-length string."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 13 }
+
+t11NsRegSymbolicNodeName OBJECT-TYPE
+    SYNTAX        SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The user-defined name of the node of this port.
+
+           If no 'Symbolic Node Name' has been registered, then
+           the value of this object is the zero-length string."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 14 }
+
+t11NsRegFc4Features OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0 | 128))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The FC-4 Features associated with FC-4 Types on this
+           port encoded as a 128-byte value in network-byte order,
+           or the zero-length string if no 'FC-4 Features' have been
+           registered.
+
+           Section 5.2.3.15 of FC-GS-4 is the authoritative
+           definition of the format of the 128-byte value,
+           i.e., if different, FC-GS-4 takes precedence over the
+           following description:
+
+           The 128-byte value is an array of 4-bit values, one for
+           each FC-4 Type value, positioned as follows: the 5 most
+           significant bits of a Type value identify where it appears
+           within the 128-byte value, specifically, within which word:
+
+                 - Word 0 (of the 128-byte value) contains information
+                   related to Types '00' through '07';
+                 - Word 1 contains information related to Types
+                   '08' through 0F';
+                 - and so forth, up to Word 31, which contains
+                   information related to Types 'F8' through 'FF'.
+
+           The least significant of the eight 4-bit values in each
+           Word represents an FC-4 Type with 000 as its 3 least
+           significant bits, and most significant 4-bit value in
+           each Word represents an FC-4 Type with 111 as its 3 least
+           significant bits."
+    REFERENCE
+           "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4), section 5.2.3.15."
+    DEFVAL {''H}
+    ::= { t11NsRegEntry 15 }
+
+--
+-- Registered FC-4 Descriptors
+--
+
+t11NsRegFc4DescriptorTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF T11NsRegFc4DescriptorEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "This table contains entries for all FC-4 Descriptors
+           registered in the identified Name Server Information
+           Subsets across all Fabrics for which such subsets
+           contain information."
+    ::= { t11NsStatus 3 }
+
+t11NsRegFc4DescriptorEntry OBJECT-TYPE
+    SYNTAX        T11NsRegFc4DescriptorEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An entry in the t11NsRegFc4DescriptorTable,
+           containing information about an FC-4 Descriptor
+           that is associated with a particular FC-4 Type
+           value.  The particular FC-4 Descriptor was
+           registered by an Nx_Port (identified by
+           t11NsRegPortIdentifier) in a Name Server Information
+           Subset (identified by t11NsInfoSubsetIndex) within
+           the Fibre Channel management instance (identified by
+           fcmInstanceIndex) on the Fabric (identified by
+
+           t11NsRegFabricIndex).
+
+           If no FC-4 Descriptors have been registered
+           for a particular port, then there will be no
+           entries in this table for that port."
+    INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
+            t11NsRegFabricIndex, t11NsRegPortIdentifier,
+            t11NsRegFc4TypeValue }
+    ::= { t11NsRegFc4DescriptorTable 1 }
+
+T11NsRegFc4DescriptorEntry ::= SEQUENCE {
+    t11NsRegFc4TypeValue           Unsigned32,
+    t11NsRegFc4Descriptor          OCTET STRING
+}
+
+t11NsRegFc4TypeValue OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..255)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+           "An integer value that identifies an FC-4 Type value
+           (representing a particular protocol type, as specified
+           in FC-FS) for which an FC-4 Descriptor has been
+           registered.
+
+           An instance of this object contains a 'Type value'
+           that corresponds to a '1' bit in the value of the
+           t11NsRegFc4Type registered for the same port;
+           this correspondence is as specified in FC-GS-4."
+    REFERENCE
+           "ANSI INCITS 387-2004, Fibre Channel - Generic
+              Services-4 (FC-GS-4), section 5.2.3.8, and
+           ANSI INCITS 373-2003, Fibre Channel - Framing and
+              Signaling (FC-FS), section 9.6, Table 29."
+    ::= { t11NsRegFc4DescriptorEntry 1 }
+
+t11NsRegFc4Descriptor OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The FC-4 Descriptor value that has been registered
+           for the particular port on the particular Fabric, and
+           for the FC-4 Type represented by the corresponding
+           value of t11NsRegFc4TypeIndex.
+
+           The format of an FC-4 Descriptor is dependent on the
+           corresponding FC-4 Type value, but is represented in
+
+           network-byte order."
+    REFERENCE
+           "ANSI INCITS 387-2004, Fibre Channel - Generic
+           Services-4 (FC-GS-4), section 5.2.5.42"
+    ::= { t11NsRegFc4DescriptorEntry 2 }
+
+--
+-- Name Server per-Fabric Statistics
+--
+
+t11NsStatsTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF T11NsStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "This table contains per-Fabric state and statistics
+           for operations upon the identified Name Server
+           Information Subsets."
+    ::= { t11NsStatistics 1 }
+
+t11NsStatsEntry OBJECT-TYPE
+    SYNTAX        T11NsStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An entry in this table contains state and statistics
+           for operations upon a Name Server Information Subset
+           (identified by t11NsInfoSubsetIndex) within the Fibre
+           Channel management instance (identified by
+           fcmInstanceIndex) on the Fabric (identified by
+           t11NsRegFabricIndex)."
+    INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
+            t11NsRegFabricIndex }
+    ::= { t11NsStatsTable 1 }
+
+T11NsStatsEntry ::=  SEQUENCE {
+    t11NsInGetReqs                Counter32,
+    t11NsOutGetReqs               Counter32,
+    t11NsInRegReqs                Counter32,
+    t11NsInDeRegReqs              Counter32,
+    t11NsInRscns                  Counter32,
+    t11NsOutRscns                 Counter32,
+    t11NsRejects                  Counter32,
+    t11NsDatabaseFull             TruthValue
+ }
+
+t11NsInGetReqs OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of (CT_IU) Get Requests
+           received requesting information from this Name
+           Server Information Subset on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 1 }
+
+t11NsOutGetReqs OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of (CT_IU) Get Requests sent in
+           order to obtain information needed in this Name Server
+           Information Subset on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 2 }
+
+t11NsInRegReqs OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of (CT_IU) Registration Requests
+           received to register information in the Name Server
+           Information Subset on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 3 }
+
+t11NsInDeRegReqs OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of (CT_IU) De-registration Requests
+           received to de-register information from this Name Server
+           Information Subset on this Fabric.
+
+           This counter has no discontinuities other than those
+
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 4 }
+
+t11NsInRscns OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of received RSCNs, indicating
+           Name Server-related changes relating to this Name
+           Server Information Subset on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 5 }
+
+t11NsOutRscns OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of transmitted RSCNs, indicating
+           Name Server-related changes relating to this Name
+           Server Information Subset on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 6 }
+
+t11NsRejects OBJECT-TYPE
+    SYNTAX        Counter32
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The total number of CT_IU Requests for Name
+           Server functions on this Name Server Information
+           Subset on this Fabric that were rejected.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11NsStatsEntry 7 }
+
+t11NsDatabaseFull OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "An indication of whether the database containing this
+
+           Name Server Information Subset is full.  This object is
+           set to 'true' only if the Name Server is unable to allocate
+           space for a new entry for the corresponding Fabric, and it is
+           set to 'false' whenever an existing entry is deleted for the
+           corresponding Fabric."
+    ::= { t11NsStatsEntry 8 }
+
+--
+-- Reject information objects
+--
+
+t11NsRejectTable OBJECT-TYPE
+    SYNTAX        SEQUENCE OF T11NsRejectEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "This table contains information about the most recent
+           Name Server Registration Request failures for various
+           ports on various Fabrics.
+
+           If no information is available about the most recent
+           rejection of a Registration Request on a particular port
+           on a particular Fabric, then there will no entry in this
+           table for that port and Fabric.
+
+           When a t11NsRejectRegNotify notification is sent for
+           such a Registration Request failure, the values of the
+           objects in the relevant entry of this table are updated
+           immediately prior to generating the notification."
+    ::= { t11NsStatus 4 }
+
+t11NsRejectEntry OBJECT-TYPE
+    SYNTAX T11NsRejectEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An entry containing information about the most recent
+           rejection of a request to register information in the Name
+           Server Information Subset (identified by
+           t11NsInfoSubsetIndex) within the Fibre Channel management
+           instance (identified by fcmInstanceIndex) for a particular
+           port (identified by t11NsRegPortIdentifier) on a particular
+           Fabric (identified by t11NsRegFabricIndex)."
+    INDEX { fcmInstanceIndex, t11NsInfoSubsetIndex,
+            t11NsRegFabricIndex, t11NsRegPortIdentifier }
+    ::= { t11NsRejectTable 1 }
+
+T11NsRejectEntry ::= SEQUENCE {
+
+    t11NsRejectCtCommandString   OCTET STRING,
+    t11NsRejectReasonCode        T11NsGs4RejectReasonCode,
+    t11NsRejReasonCodeExp        T11NsRejReasonCodeExpl,
+    t11NsRejReasonVendorCode     OCTET STRING
+}
+
+t11NsRejectCtCommandString OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The binary content of the Registration Request,
+           formatted as an octet string (in network byte
+           order) containing the CT_IU, as described in
+           Table 2 of [FC-GS-4] (including the preamble),
+           which was most recently rejected for the particular
+           Name Server Information Subset on the particular port
+           on the particular Fabric.
+
+           This object contains the zero-length string
+           if and when the CT-IU's content is unavailable.
+
+           When the length of this object is 255 octets, it
+           contains the first 255 octets of the CT-IU (in
+           network-byte order)."
+    ::= { t11NsRejectEntry 1 }
+
+t11NsRejectReasonCode OBJECT-TYPE
+    SYNTAX        T11NsGs4RejectReasonCode
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "A registration reject reason code.  This object
+           contains the reason code of the most recent Name
+           Server Registration Request failure for the
+           particular port on the particular Fabric."
+    ::= { t11NsRejectEntry 2 }
+
+t11NsRejReasonCodeExp OBJECT-TYPE
+    SYNTAX        T11NsRejReasonCodeExpl
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "A registration reject reason code explanation.  This
+           object contains the reason code explanation of the most
+           recent Name Server Registration Request failure for the
+           particular port on the particular Fabric."
+    ::= { t11NsRejectEntry 3 }
+
+t11NsRejReasonVendorCode OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(1))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "A registration reject vendor-specific code.  This
+           object contains the vendor-specific code of the most
+           recent Name Server Registration Request failure for the
+           particular port on the particular Fabric."
+    ::= { t11NsRejectEntry 4 }
+
+--
+-- Notifications
+--
+
+t11NsRejectRegNotify NOTIFICATION-TYPE
+    OBJECTS   { t11FamLocalSwitchWwn,
+                t11NsRegPortName, t11NsRejectCtCommandString,
+                t11NsRejectReasonCode, t11NsRejReasonCodeExp,
+                t11NsRejReasonVendorCode }
+    STATUS    current
+    DESCRIPTION
+           "This notification is generated whenever a request to
+           register information in a Name Server Information
+           Subset (for which the corresponding instance of
+           t11NsInfoSubsetRejReqNotfyEnable is 'true') is
+           rejected on a particular Fabric for a particular Nx_Port.
+
+           The value of t11FamLocalSwitchWwn indicates the
+           WWN of the switch that received the request.
+           (If the WWN is unavailable, the value is set to
+           the zero-length string.)
+
+           The value of t11NsRejectCtCommandString indicates
+           the rejected request, and the values of
+           t11NsRejectReasonCode, t11NsRejReasonCodeExp, and
+           t11NsRejReasonVendorCode indicate the reason for
+           the rejection.
+
+           The value of t11NsRegPortName represents the Port Name
+           if it is able to be extracted out of the Registration
+           Request, or otherwise the value as currently registered
+           on the port."
+    ::= { t11NsNotifications 1 }
+
+--
+-- Conformance
+
+--
+
+t11NsMIBCompliances OBJECT IDENTIFIER ::= {t11NsMIBConformance 1}
+t11NsMIBGroups      OBJECT IDENTIFIER ::= {t11NsMIBConformance 2}
+
+t11NsMIBCompliance MODULE-COMPLIANCE
+    STATUS    current
+    DESCRIPTION
+           "The compliance statement for entities that
+           implement the Fibre Channel Name Server."
+    MODULE MANDATORY-GROUPS {t11NsDBGroup,
+                             t11NsNotifyControlGroup,
+                             t11NsNotifyGroup}
+
+      OBJECT t11NsInfoSubsetRejReqNotfyEnable
+      MIN-ACCESS read-only
+      DESCRIPTION
+             "Write access is not required."
+
+      GROUP t11NsRequestStatsGroup
+      DESCRIPTION
+             "This group is mandatory only for an implementation
+             that captures statistics related to Name Server
+             requests."
+
+      GROUP t11NsRscnStatsGroup
+      DESCRIPTION
+             "This group is mandatory only for an implementation
+             that captures statistics related to Name
+             Server-related RSCNs."
+
+      GROUP t11NsRejectStatsGroup
+      DESCRIPTION
+             "This group is mandatory only for an implementation
+             that captures statistics related to Name Server
+             rejects."
+    ::= { t11NsMIBCompliances 1 }
+
+-- Units of conformance
+
+t11NsDBGroup        OBJECT-GROUP
+    OBJECTS { t11NsInfoSubsetSwitchIndex,
+              t11NsInfoSubsetTableLastChange,
+              t11NsInfoSubsetNumRows,
+              t11NsRegPortName,
+              t11NsRegNodeName,
+              t11NsRegClassOfSvc,
+              t11NsRegNodeIpAddress,
+              t11NsRegProcAssoc,
+              t11NsRegFc4Type,
+              t11NsRegPortType,
+              t11NsRegPortIpAddress,
+              t11NsRegFabricPortName,
+              t11NsRegHardAddress,
+              t11NsRegSymbolicPortName,
+              t11NsRegSymbolicNodeName,
+              t11NsRegFc4Features,
+              t11NsRegFc4Descriptor }
+    STATUS current
+    DESCRIPTION
+           "A collection of objects for monitoring the information
+           registered in a Name Server Information Subset."
+    ::= { t11NsMIBGroups 1 }
+
+t11NsRequestStatsGroup OBJECT-GROUP
+    OBJECTS { t11NsInGetReqs,
+              t11NsOutGetReqs,
+              t11NsInRegReqs,
+              t11NsInDeRegReqs,
+              t11NsDatabaseFull}
+    STATUS current
+    DESCRIPTION
+           "A collection of objects for displaying Name
+           Server statistics and state for Name Server requests."
+    ::= { t11NsMIBGroups 2 }
+
+t11NsRscnStatsGroup OBJECT-GROUP
+    OBJECTS { t11NsInRscns,
+              t11NsOutRscns }
+    STATUS current
+    DESCRIPTION
+           "A collection of objects for displaying Name
+           Server statistics for Name Server-related RSCNs."
+    ::= { t11NsMIBGroups 3 }
+
+t11NsRejectStatsGroup OBJECT-GROUP
+    OBJECTS { t11NsInfoSubsetTotalRejects,
+              t11NsRejects }
+    STATUS current
+    DESCRIPTION
+           "A collection of objects for displaying Name
+           Server statistics for rejects."
+    ::= { t11NsMIBGroups 4 }
+
+t11NsNotifyControlGroup  OBJECT-GROUP
+
+    OBJECTS { t11NsRejectCtCommandString,
+              t11NsRejectReasonCode,
+              t11NsRejReasonCodeExp,
+              t11NsRejReasonVendorCode,
+              t11NsInfoSubsetRejReqNotfyEnable }
+    STATUS current
+    DESCRIPTION
+           "A collection of notification control and
+           notification information objects for monitoring
+           rejections of Name Server registrations."
+    ::= { t11NsMIBGroups 5 }
+
+t11NsNotifyGroup        NOTIFICATION-GROUP
+    NOTIFICATIONS {t11NsRejectRegNotify }
+    STATUS current
+    DESCRIPTION
+           "A collection of notifications for monitoring
+           rejections of Name Server registrations."
+    ::= { t11NsMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-ROUTE-MIB.mib b/snmp_builder/mibs/T11-FC-ROUTE-MIB.mib
new file mode 100644
index 0000000..4ae5021
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-ROUTE-MIB.mib
@@ -0,0 +1,448 @@
+T11-FC-ROUTE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, mib-2                   FROM SNMPv2-SMI  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP     FROM SNMPv2-CONF -- [RFC2580]
+    RowStatus, TimeStamp,
+    StorageType                         FROM SNMPv2-TC   -- [RFC2579]
+    InterfaceIndex, InterfaceIndexOrZero  FROM IF-MIB    -- [RFC2863]
+    fcmInstanceIndex, fcmSwitchIndex,
+    FcAddressIdOrZero, FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]
+    T11FabricIndex                      FROM T11-TC-MIB; -- [RFC4439]
+
+t11FcRouteMIB MODULE-IDENTITY
+    LAST-UPDATED "200608140000Z"
+    ORGANIZATION "T11"
+    CONTACT-INFO
+              "     Claudio DeSanti
+                    Cisco Systems, Inc.
+                    170 West Tasman Drive
+                    San Jose, CA 95134 USA
+                    EMail: cds@cisco.com
+
+                    Keith McCloghrie
+                    Cisco Systems, Inc.
+                    170 West Tasman Drive
+                    San Jose, CA USA 95134
+                    Email: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for configuring and displaying Fibre
+           Channel Route Information.
+
+           Copyright (C) The Internet Society (2006).  This version
+           of this MIB module is part of RFC 4625;  see the RFC
+           itself for full legal notices."
+    REVISION     "200608140000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC4625."
+    ::= {mib-2 144 }
+
+t11FcRouteNotifications OBJECT IDENTIFIER ::= { t11FcRouteMIB 0 }
+t11FcRouteObjects       OBJECT IDENTIFIER ::= { t11FcRouteMIB 1 }
+t11FcRouteConformance   OBJECT IDENTIFIER ::= { t11FcRouteMIB 2 }
+
+--
+-- Per-Fabric routing information
+--
+t11FcRouteFabricTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11FcRouteFabricEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The table containing Fibre Channel Routing information
+           that is specific to a Fabric."
+    ::= { t11FcRouteObjects 1 }
+
+t11FcRouteFabricEntry OBJECT-TYPE
+    SYNTAX      T11FcRouteFabricEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "Each entry contains routing information specific to a
+           particular Fabric on a particular switch (identified by
+           values of fcmInstanceIndex and fcmSwitchIndex)."
+    INDEX      { fcmInstanceIndex, fcmSwitchIndex,
+                 t11FcRouteFabricIndex }
+    ::= { t11FcRouteFabricTable 1 }
+
+T11FcRouteFabricEntry ::=
+    SEQUENCE {
+        t11FcRouteFabricIndex      T11FabricIndex,
+        t11FcRouteFabricLastChange TimeStamp
+    }
+
+t11FcRouteFabricIndex OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "A unique index value that uniquely identifies a
+           particular Fabric.
+
+           In a Fabric conformant to FC-SW-3, only a single Fabric
+
+           can operate within a physical infrastructure, and thus
+           the value of this Fabric Index will always be 1.
+
+           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
+           can operate within one (or more) physical infrastructures.
+           In such a case, index value is used to uniquely identify a
+           particular Fabric within a physical infrastructure."
+    ::= { t11FcRouteFabricEntry 1 }
+
+t11FcRouteFabricLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+           "The value of sysUpTime at the most recent time when any
+           corresponding row in the t11FcRouteTable was created,
+           modified, or deleted.  A corresponding row in the
+           t11FcRouteTable is for the same management instance,
+           the same switch, and same Fabric as the row in this table.
+
+           If no change has occurred since the last restart of the
+           management system, then the value of this object is 0."
+    ::= { t11FcRouteFabricEntry 2 }
+
+--
+-- Fibre Channel Routing table
+--
+t11FcRouteTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11FcRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The Fibre Channel Routing tables for the
+           locally managed switches.  This table lists all the
+           routes that are configured in and/or computed by any
+           local switch for any Fabric.
+
+           Such routes are used by a switch to forward frames (of user
+           data) on a Fabric.  The conceptual process is based on
+           extracting the Destination Fibre Channel Address Identifier
+           (D_ID) out of a received frame (of user data) and comparing
+           it to each entry of this table that is applicable to the
+           given switch and Fabric.  Such comparison consists of first
+           performing a logical-AND of the extracted D_ID with a mask
+           (the value of t11FcRouteDestMask) and second comparing the
+           result of that 'AND' operation to the value of
+           t11FcRouteDestAddrId.  A similar comparison is made of the
+           Source Fibre Channel Address Identifier (S_ID) of a frame
+
+           against the t11FcRouteSrcAddrId and t11FcRouteSrcMask values
+           of an entry.  If an entry's value of t11FcRouteInInterface
+           is non-zero, then a further comparison determines if the
+           frame was received on the appropriate interface.  If all of
+           these comparisons for a particular entry are successful,
+           then that entry represents a potential route for forwarding
+           the received frame.
+
+           For entries configured by a user, t11FcRouteProto has
+           the value 'netmgmt'; only entries of this type can be
+           deleted by the user."
+    ::= { t11FcRouteObjects 2 }
+
+t11FcRouteEntry OBJECT-TYPE
+    SYNTAX      T11FcRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "Each entry contains a route to a particular destination,
+           possibly from a particular subset of source addresses,
+           on a particular Fabric via a particular output interface
+           and learned in a particular manner."
+    INDEX       { fcmInstanceIndex, fcmSwitchIndex,
+                  t11FcRouteFabricIndex,
+                  t11FcRouteDestAddrId, t11FcRouteDestMask,
+                  t11FcRouteSrcAddrId, t11FcRouteSrcMask,
+                  t11FcRouteInInterface, t11FcRouteProto,
+                  t11FcRouteOutInterface }
+    ::= { t11FcRouteTable 1 }
+T11FcRouteEntry ::=
+    SEQUENCE {
+        t11FcRouteDestAddrId   FcAddressIdOrZero,
+        t11FcRouteDestMask     FcAddressIdOrZero,
+        t11FcRouteSrcAddrId    FcAddressIdOrZero,
+        t11FcRouteSrcMask      FcAddressIdOrZero,
+        t11FcRouteInInterface  InterfaceIndexOrZero,
+        t11FcRouteProto        INTEGER,
+        t11FcRouteOutInterface InterfaceIndex,
+        t11FcRouteDomainId     FcDomainIdOrZero,
+        t11FcRouteMetric       Unsigned32,
+        t11FcRouteType         INTEGER,
+        t11FcRouteIfDown       INTEGER,
+        t11FcRouteStorageType  StorageType,
+        t11FcRouteRowStatus    RowStatus
+    }
+
+t11FcRouteDestAddrId OBJECT-TYPE
+    SYNTAX      FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The destination Fibre Channel Address Identifier of
+           this route.  A zero-length string for this field is
+           not allowed."
+    ::= { t11FcRouteEntry 1 }
+
+t11FcRouteDestMask OBJECT-TYPE
+    SYNTAX      FcAddressIdOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The mask to be logical-ANDed with a destination
+           Fibre Channel Address Identifier before it is compared
+           to the value in the t11FcRouteDestAddrId field.
+           Allowed values are 255.255.255, 255.255.0, or 255.0.0.
+           FSPF's definition generates routes to a Domain_ID,
+           so the mask for all FSPF-generated routes is 255.0.0.
+           The zero-length value has the same meaning as 0.0.0."
+    ::= { t11FcRouteEntry 2 }
+
+t11FcRouteSrcAddrId OBJECT-TYPE
+    SYNTAX      FcAddressIdOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The source Fibre Channel Address Identifier of this
+           route.  Note that if this object and the corresponding
+           instance of t11FcRouteSrcMask both have a value of 0.0.0,
+           then this route matches all source addresses.  The
+           zero-length value has the same meaning as 0.0.0."
+    ::= { t11FcRouteEntry 3 }
+
+t11FcRouteSrcMask OBJECT-TYPE
+    SYNTAX      FcAddressIdOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The mask to be logical-ANDed with a source
+           Fibre Channel Address Identifier before it is compared
+           to the value in the t11FcRouteSrcAddrId field.  Allowed
+           values are 255.255.255, 255.255.0, 255.0.0, or 0.0.0.
+           The zero-length value has the same meaning as 0.0.0."
+    ::= { t11FcRouteEntry 4 }
+
+t11FcRouteInInterface OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "If the value of this object is non-zero, it is the
+           value of ifIndex that identifies the local
+           Fibre Channel interface through which a frame
+           must have been received in order to match with
+           this entry.  If the value of this object is zero,
+           the matching does not require that the frame be
+           received on any specific interface."
+    ::= { t11FcRouteEntry 5 }
+
+t11FcRouteProto OBJECT-TYPE
+    SYNTAX   INTEGER {
+                 other(1),
+                 local(2),
+                 netmgmt(3),
+                 fspf(4)
+              }
+    MAX-ACCESS not-accessible
+    STATUS   current
+    DESCRIPTION
+           "The mechanism via which this route was learned:
+                other(1)  - not specified
+                local(2)  - local interface
+                netmgmt(3)- static route
+                fspf(4)   - Fibre Shortest Path First
+           "
+    ::= { t11FcRouteEntry 6 }
+
+t11FcRouteOutInterface OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "The value of ifIndex that identifies the local
+           Fibre Channel interface through which the next hop
+           of this route is to be reached."
+    ::= { t11FcRouteEntry 7 }
+
+t11FcRouteDomainId OBJECT-TYPE
+    SYNTAX      FcDomainIdOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The domain_ID of next hop switch.
+
+           This object can have a value of zero if the value
+
+           of t11FcRouteProto is 'local'."
+    ::= { t11FcRouteEntry 8 }
+
+t11FcRouteMetric OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65536)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The routing metric for this route.
+
+           The use of this object is dependent on t11FcRouteProto."
+    ::= { t11FcRouteEntry 9 }
+
+t11FcRouteType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    local(1),
+                    remote(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The type of route.
+
+           local(1)  - a route for which the next Fibre Channel
+                       port is the final destination;
+           remote(2) - a route for which the next Fibre Channel
+                      port is not the final destination."
+    DEFVAL {local}
+    ::= { t11FcRouteEntry 10 }
+
+t11FcRouteIfDown OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    remove(1),
+                    retain(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The value of this object indicates what happens to
+           this route when the output interface (given by the
+           corresponding value of t11FcRouteOutInterface) is
+           operationally 'down'.  If this object's value is 'retain',
+           the route is to be retained in this table.  If this
+           object's value is 'remove', the route is to be removed
+           from this table."
+    DEFVAL  { retain }
+    ::= { t11FcRouteEntry 11 }
+
+t11FcRouteStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The storage type for this conceptual row.
+           Conceptual rows having the value 'permanent' need not
+           allow write-access to any columnar objects in the row."
+       DEFVAL { nonVolatile }
+    ::= { t11FcRouteEntry 12 }
+
+t11FcRouteRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+           "The status of this conceptual row.
+           The only rows that can be deleted by setting this object to
+           'destroy' are those for which t11FcRouteProto has the value
+           'netmgmt'."
+    ::= { t11FcRouteEntry 13 }
+
+--
+-- Conformance
+--
+t11FcRouteCompliances OBJECT IDENTIFIER
+                         ::= { t11FcRouteConformance 1 }
+t11FcRouteGroups      OBJECT IDENTIFIER
+                         ::= { t11FcRouteConformance 2 }
+
+t11FcRouteCompliance  MODULE-COMPLIANCE
+    STATUS    current
+    DESCRIPTION
+           "The compliance statement for entities that
+           implement the T11-FC-ROUTE-MIB.
+--
+-- Note: The next four OBJECT clauses are for auxiliary objects, and the
+-- SMIv2 does not permit inclusion of objects that are not accessible
+-- in an OBJECT clause (see Sections 3.1 & 5.4.3 in STD 58, RFC 2580).
+-- Thus, these four clauses cannot be included below in the normal
+-- location for OBJECT clauses.
+--
+--      OBJECT     t11FcRouteSrcAddrId
+--      SYNTAX     FcAddressIdOrZero (SIZE (0))
+--      DESCRIPTION
+--             'Support is not required for routes that
+--             match only a subset of possible source
+
+--             addresses.'
+--
+--      OBJECT     t11FcRouteSrcMask
+--      SYNTAX     FcAddressIdOrZero (SIZE (0))
+--      DESCRIPTION
+--             'Support is not required for routes that
+--             match only a subset of possible source
+--             addresses.'
+--
+--      OBJECT     t11FcRouteDestMask
+--      DESCRIPTION
+--             'Support is mandatory only for FSPF-generated
+--             routes.  Since FSPF's definition generates
+--             routes to a Domain_ID, the mask for all
+--             FSPF-generated routes is 255.0.0.  Thus,
+--             support is only required for 255.0.0.'
+--
+--      OBJECT     t11FcRouteInInterface
+--      SYNTAX     InterfaceIndexOrZero (0)
+--      DESCRIPTION
+--             'Support for routes specific to particular
+--             source interfaces is not required.'
+          "
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { t11FcRouteGroup }
+
+        OBJECT     t11FcRouteIfDown
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcRouteDomainId
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcRouteMetric
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcRouteType
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcRouteStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcRouteRowStatus
+        SYNTAX     INTEGER { active(1) }
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+    ::= { t11FcRouteCompliances 1 }
+t11FcRouteGroup  OBJECT-GROUP
+    OBJECTS  { t11FcRouteFabricLastChange,
+               t11FcRouteDomainId,
+               t11FcRouteMetric,
+               t11FcRouteType,
+               t11FcRouteIfDown,
+               t11FcRouteStorageType,
+               t11FcRouteRowStatus
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for displaying and configuring
+           routes."
+    ::= { t11FcRouteGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-RSCN-MIB.mib b/snmp_builder/mibs/T11-FC-RSCN-MIB.mib
new file mode 100644
index 0000000..34e2428
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-RSCN-MIB.mib
@@ -0,0 +1,751 @@
+T11-FC-RSCN-MIB DEFINITIONS ::= BEGIN
+
+-- The Fibre Channel RSCN MIB
+--
+-- for the monitoring of registrations by Nx_Ports to receive
+-- Registered State Change Notifications (RSCNs), and the
+-- monitoring of RSCN usage.
+--
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    Counter32, mib-2                     FROM SNMPv2-SMI   -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                   FROM SNMPv2-CONF  -- [RFC2580]
+    TruthValue                           FROM SNMPv2-TC    -- [RFC2579]
+    fcmInstanceIndex, fcmSwitchIndex,
+    FcNameIdOrZero, FcAddressIdOrZero    FROM FC-MGMT-MIB  -- [RFC4044]
+    T11NsGs4RejectReasonCode   FROM T11-FC-NAME-SERVER-MIB -- [RFC4438]
+    T11FabricIndex                       FROM T11-TC-MIB;  -- [RFC4439]
+
+t11FcRscnMIB  MODULE-IDENTITY
+    LAST-UPDATED "200701080000Z"
+    ORGANIZATION "For the initial versions, T11.
+                  For later versions, the IETF's IMSS Working Group."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for the management of registrations
+
+           by Nx_Ports to receive RSCNs (Registered State Change
+           Notifications) on a Fibre Channel Fabric, as defined
+           in FC-LS, and for the monitoring of RSCNs sent/received
+           or rejected in a Fibre Channel Fabric.
+
+           Copyright (C) The Internet Society (2007).  This version of
+           this MIB module is part of RFC 4983;  see the RFC itself for
+           full legal notices."
+    REVISION    "200701080000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4983."
+    ::= { mib-2 161 }
+
+t11FcRscnNotifications  OBJECT IDENTIFIER ::= { t11FcRscnMIB 0 }
+t11FcRscnObjects        OBJECT IDENTIFIER ::= { t11FcRscnMIB 1 }
+t11FcRscnConformance    OBJECT IDENTIFIER ::= { t11FcRscnMIB 2 }
+t11FcRscnRegistrations  OBJECT IDENTIFIER ::= { t11FcRscnObjects 1 }
+t11FcRscnStats          OBJECT IDENTIFIER ::= { t11FcRscnObjects 2 }
+t11FcRscnInformation    OBJECT IDENTIFIER ::= { t11FcRscnObjects 3 }
+
+-- State Change Registration Table
+
+t11FcRscnRegTable  OBJECT-TYPE
+    SYNTAX         SEQUENCE OF T11FcRscnRegEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION
+           "A table of Nx_Ports that have registered to receive
+           RSCNs on all Fabrics configured on one or more Fibre
+           Channel switches."
+    ::= { t11FcRscnRegistrations 1 }
+
+t11FcRscnRegEntry  OBJECT-TYPE
+    SYNTAX        T11FcRscnRegEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An entry containing information about one Nx_Port that
+           has registered with a particular switch (identified by
+           values of fcmInstanceIndex and fcmSwitchIndex) for a
+           particular Fabric (identified by a t11FcRscnFabricIndex
+           value)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcRscnFabricIndex,
+              t11FcRscnRegFcId }
+    ::= { t11FcRscnRegTable 1 }
+
+T11FcRscnRegEntry ::= SEQUENCE {
+
+    t11FcRscnFabricIndex         T11FabricIndex,
+    t11FcRscnRegFcId             FcAddressIdOrZero,
+    t11FcRscnRegType             BITS
+}
+
+t11FcRscnFabricIndex OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Fabric.
+
+           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
+           can operate within one (or more) physical infrastructures.
+           In such a case, this index value is used to uniquely
+           identify a particular Fabric within a physical
+           infrastructure.
+
+           In a Fabric that has (or can have) only a single Fabric
+           operating within the physical infrastructure, the
+           value of this Fabric Index will always be 1."
+    REFERENCE
+          "ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
+          (FC-SW-4), December 2006."
+    ::= { t11FcRscnRegEntry 1 }
+
+t11FcRscnRegFcId  OBJECT-TYPE
+    SYNTAX        FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "The Fibre Channel Address Identifier of the
+           registering Nx_Port."
+    ::= { t11FcRscnRegEntry 2 }
+
+t11FcRscnRegType  OBJECT-TYPE
+    SYNTAX        BITS {
+                      fromFabricController(0),
+                      fromNxPort(1)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This object indicates the type of registration
+           desired by the registering Nx_Port, one bit per type:
+
+           'fromFabricController' -- RSCNs generated for events
+
+                                  detected by the Fabric Controller.
+
+           'fromNxPorts'          -- RSCNs generated for events
+                                  detected by the affected Nx_Port."
+    REFERENCE
+          "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 40."
+    ::= { t11FcRscnRegEntry 3 }
+
+-- Statistics
+
+t11FcRscnStatsTable  OBJECT-TYPE
+    SYNTAX         SEQUENCE OF T11FcRscnStatsEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION
+           "The RSCN-related statistics on all Fabrics configured
+           on one or more Fibre Channel switches.
+
+           Two levels of statistics are included:
+
+              1) counters at the message-type level, for:
+                 - the number of SCRs received/rejected,
+                 - the number of RSCNs sent/received/rejected,
+                 - the number of SW_RSCNs sent/received/rejected.
+
+              2) counters of sent/received RSCNs per 'Event
+                 Qualifier' value.  Note that if and when several
+                 RSCN events are coalesced into a single RSCN
+                 message, then that message may be counted in
+                 more than one of these counters."
+    ::= { t11FcRscnStats 1 }
+
+t11FcRscnStatsEntry  OBJECT-TYPE
+    SYNTAX        T11FcRscnStatsEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+           "An entry containing statistics for a particular Fabric
+           (identified by a t11FcRscnFabricIndex value) on a particular
+           switch (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex)."
+    INDEX  { fcmInstanceIndex, fcmSwitchIndex, t11FcRscnFabricIndex }
+    ::= { t11FcRscnStatsTable 1 }
+
+T11FcRscnStatsEntry ::= SEQUENCE {
+    t11FcRscnInScrs                    Counter32,
+    t11FcRscnInRscns                   Counter32,
+    t11FcRscnOutRscns                  Counter32,
+    t11FcRscnInSwRscns                 Counter32,
+    t11FcRscnOutSwRscns                Counter32,
+    t11FcRscnScrRejects                Counter32,
+    t11FcRscnRscnRejects               Counter32,
+    t11FcRscnSwRscnRejects             Counter32,
+    t11FcRscnInUnspecifiedRscns        Counter32,
+    t11FcRscnOutUnspecifiedRscns       Counter32,
+    t11FcRscnInChangedAttribRscns      Counter32,
+    t11FcRscnOutChangedAttribRscns     Counter32,
+    t11FcRscnInChangedServiceRscns     Counter32,
+    t11FcRscnOutChangedServiceRscns    Counter32,
+    t11FcRscnInChangedSwitchRscns      Counter32,
+    t11FcRscnOutChangedSwitchRscns     Counter32,
+    t11FcRscnInRemovedRscns            Counter32,
+    t11FcRscnOutRemovedRscns           Counter32
+}
+
+t11FcRscnInScrs  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of SCRs received from Nx_Ports
+           by this switch on this Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 1 }
+
+t11FcRscnInRscns  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of RSCNs received from Nx_Ports
+           by this switch on this Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 2 }
+
+t11FcRscnOutRscns  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of RSCNs transmitted to Nx_Ports
+           by this switch on this Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 3 }
+
+t11FcRscnInSwRscns  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of SW_RSCNs received by this switch from
+           other switches on this Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 4 }
+
+t11FcRscnOutSwRscns  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of SW_RSCNs transmitted by this switch
+           from other switches on this Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 5 }
+
+t11FcRscnScrRejects  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of SCRs rejected by this switch on
+           this Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 6 }
+
+t11FcRscnRscnRejects OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of RSCNs rejected by this switch on this
+           Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 7 }
+
+t11FcRscnSwRscnRejects  OBJECT-TYPE
+    SYNTAX         Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+           "The number of SW_RSCN rejected by this switch on this
+           Fabric.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    ::= { t11FcRscnStatsEntry 8 }
+
+t11FcRscnInUnspecifiedRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) received by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0000'b
+           meaning 'Event is not specified'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 9 }
+
+t11FcRscnOutUnspecifiedRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) sent by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0000'b
+           meaning 'Event is not specified'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 10 }
+
+t11FcRscnInChangedAttribRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) received by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0002'b
+           meaning 'Changed Port Attribute'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 11 }
+
+t11FcRscnOutChangedAttribRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) sent by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0002'b
+           meaning 'Changed Port Attribute'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 12 }
+
+t11FcRscnInChangedServiceRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) received by this switch on this Fabric which
+
+           contained an RSCN Event Qualifier value of '0003'b
+           meaning 'Changed Service Object'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 13 }
+
+t11FcRscnOutChangedServiceRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) sent by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0003'b
+           meaning 'Changed Service Object'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 14 }
+
+t11FcRscnInChangedSwitchRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) received by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0004'b
+           meaning 'Changed Switch Configuration'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 15 }
+
+t11FcRscnOutChangedSwitchRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) sent by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0004'b
+           meaning 'Changed Switch Configuration'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 16 }
+
+t11FcRscnInRemovedRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) received by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0005'b
+           meaning 'Removed Object'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 17 }
+
+t11FcRscnOutRemovedRscns  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of Registered State Change Notifications
+           (RSCNs) sent by this switch on this Fabric which
+           contained an RSCN Event Qualifier value of '0005'b
+           meaning 'Removed Object'.
+
+           This counter has no discontinuities other than
+           those that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+          (FC-LS), July 2007, Table 36."
+    ::= { t11FcRscnStatsEntry 18 }
+
+--
+-- Notification Control Table
+--
+t11FcRscnNotifyControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcRscnNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of control information for notifications
+           generated due to the rejection of an SCR or RSCN."
+    ::= { t11FcRscnInformation 1 }
+
+t11FcRscnNotifyControlEntry OBJECT-TYPE
+    SYNTAX       T11FcRscnNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains notification control information
+           concerning the rejection of RSCN/SCRs for a particular
+           Fabric (identified by the value of t11FcRscnFabricIndex)
+           by a particular switch (identified by values of
+           fcmInstanceIndex and fcmSwitchIndex)."
+    INDEX  { fcmInstanceIndex, fcmSwitchIndex, t11FcRscnFabricIndex }
+    ::= { t11FcRscnNotifyControlTable 1 }
+
+T11FcRscnNotifyControlEntry ::= SEQUENCE {
+     t11FcRscnIlsRejectNotifyEnable     TruthValue,
+     t11FcRscnElsRejectNotifyEnable     TruthValue,
+     t11FcRscnRejectedRequestString     OCTET STRING,
+     t11FcRscnRejectedRequestSource     FcNameIdOrZero,
+     t11FcRscnRejectReasonCode          T11NsGs4RejectReasonCode,
+     t11FcRscnRejectReasonCodeExp       OCTET STRING,
+     t11FcRscnRejectReasonVendorCode    OCTET STRING
+}
+
+t11FcRscnIlsRejectNotifyEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies if a t11FcRscnIlsRejectReqNotify
+           notification should be generated when this switch
+           rejects an SW_RSCN on this Fabric.
+
+           Values written to this object should be retained
+           over agent reboots."
+    DEFVAL { false }
+    ::= { t11FcRscnNotifyControlEntry 1 }
+
+t11FcRscnElsRejectNotifyEnable OBJECT-TYPE
+    SYNTAX        TruthValue
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+           "This object specifies if a t11FcRscnElsRejectReqNotify
+           notification should be generated when this switch
+           rejects an RSCN or SCR on this Fabric.
+
+           Values written to this object should be retained
+           over agent reboots."
+    DEFVAL { false }
+    ::= { t11FcRscnNotifyControlEntry 2 }
+
+t11FcRscnRejectedRequestString OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The binary content of the RSCN, SCR, or SW_RSCN that
+           was most recently rejected by this switch on this Fabric.
+           The value is formatted as an octet string (in network
+           byte order) as described in the relevant Fibre Channel
+           standard, containing the payload (which is typically a
+           list of affected ports and error codes) of the rejected
+           RSCN or SCR as described in FC-LS, or the rejected
+           SW_RSCN as described in FC-SW-4.
+
+           This object contains the zero-length string if and when
+           the RSCN/SCR/SW_RSCN payload is unavailable.  When the
+           length of this object is 255 octets, it contains the
+           first 255 octets of the payload (in network byte order)."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+           (FC-LS), July 2007, Tables 34 & 39.
+
+           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
+           (FC-SW-4), December 2006, Table 45."
+    ::= { t11FcRscnNotifyControlEntry 3 }
+
+t11FcRscnRejectedRequestSource OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The WWN that was the source of the RSCN, SCR, or
+           SW_RSCN that was most recently rejected by this switch
+           on this Fabric."
+    ::= { t11FcRscnNotifyControlEntry 4 }
+
+t11FcRscnRejectReasonCode OBJECT-TYPE
+    SYNTAX        T11NsGs4RejectReasonCode
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This object contains the Reason Code of the most recent
+           rejection by this switch of an RSCN, SCR or SW_RSCN on
+           this Fabric."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+           (FC-LS), July 2007, Table 146.
+
+           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
+           (FC-SW-4), December 2006, Table 5."
+    ::= { t11FcRscnNotifyControlEntry 5 }
+
+t11FcRscnRejectReasonCodeExp OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(1))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This object contains the Reason Code Explanation
+           of the most recent rejection by this switch of an
+           RSCN, SCR or SW_RSCN on this Fabric."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+           (FC-LS), July 2007, Table 147.
+
+           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
+           (FC-SW-4), December 2006, Table 6."
+    ::= { t11FcRscnNotifyControlEntry 6 }
+
+t11FcRscnRejectReasonVendorCode OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE(1))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This object contains the Reason Vendor Specific
+           Code of the most recent rejection by this switch
+           of an RSCN, SCR or SW_RSCN on this Fabric."
+    REFERENCE
+           "ANSI INCITS 433-2007, Fibre Channel - Link Services
+           (FC-LS), July 2007, Table 148.
+
+           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
+           (FC-SW-4), December 2006, Section 6.1.3."
+    ::= { t11FcRscnNotifyControlEntry 7 }
+
+-- Notifications
+
+t11FcRscnElsRejectReqNotify NOTIFICATION-TYPE
+    OBJECTS { t11FcRscnRejectedRequestString,
+              t11FcRscnRejectedRequestSource,
+              t11FcRscnRejectReasonCode,
+              t11FcRscnRejectReasonCodeExp,
+              t11FcRscnRejectReasonVendorCode }
+    STATUS  current
+    DESCRIPTION
+           "This notification is generated when a switch rejects
+           an SCR or RSCN.
+
+           The value of t11FcRscnRejectedRequestString indicates the
+           binary content of the rejected request if available, or
+           the zero-length string otherwise.  The source of the
+           rejected request is given by t11FcRscnRejectedRequestSource,
+           and the reason for rejection is given by the values of
+           t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp
+           and t11FcRscnRejectReasonVendorCode."
+    ::= { t11FcRscnNotifications 1 }
+
+t11FcRscnIlsRejectReqNotify NOTIFICATION-TYPE
+    OBJECTS { t11FcRscnRejectedRequestString,
+              t11FcRscnRejectedRequestSource,
+              t11FcRscnRejectReasonCode,
+              t11FcRscnRejectReasonCodeExp,
+              t11FcRscnRejectReasonVendorCode }
+    STATUS  current
+    DESCRIPTION
+           "This notification is generated when a switch rejects
+           an SW_RSCN.
+
+           The value of t11FcRscnRejectedRequestString indicates the
+           binary content of the rejected request if available, or
+           the zero-length string otherwise.  The source of the
+           rejected request is given by t11FcRscnRejectedRequestSource,
+           and the reason for rejection is given by the values of
+           t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp
+           and t11FcRscnRejectReasonVendorCode."
+    ::= { t11FcRscnNotifications 2 }
+
+-- Conformance
+t11FcRscnCompliances OBJECT IDENTIFIER ::= { t11FcRscnConformance 1 }
+t11FcRscnGroups      OBJECT IDENTIFIER ::= { t11FcRscnConformance 2 }
+
+t11FcRscnCompliance MODULE-COMPLIANCE
+    STATUS    current
+    DESCRIPTION
+           "The compliance statement for entities that implement
+           this MIB."
+    MODULE
+        MANDATORY-GROUPS { t11FcRscnRegistrationGroup,
+                           t11FcRscnNotifyControlGroup,
+                           t11FcRscnNotifyGroup }
+
+    GROUP   t11FcRscnStatsGroup
+    DESCRIPTION
+            "These counters, containing RSCN-related statistics, are
+            mandatory only for those systems that count such events."
+
+    OBJECT       t11FcRscnIlsRejectNotifyEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT       t11FcRscnElsRejectNotifyEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+    ::= { t11FcRscnCompliances 1 }
+
+-- Units of conformance
+
+t11FcRscnRegistrationGroup  OBJECT-GROUP
+    OBJECTS { t11FcRscnRegType }
+    STATUS  current
+    DESCRIPTION
+           "A collection of objects for monitoring RSCN
+           registrations."
+    ::= { t11FcRscnGroups 1 }
+
+t11FcRscnStatsGroup   OBJECT-GROUP
+    OBJECTS { t11FcRscnInScrs,
+              t11FcRscnInRscns,
+              t11FcRscnOutRscns,
+              t11FcRscnInSwRscns,
+              t11FcRscnOutSwRscns,
+              t11FcRscnScrRejects,
+              t11FcRscnRscnRejects,
+              t11FcRscnSwRscnRejects,
+              t11FcRscnInUnspecifiedRscns,
+              t11FcRscnOutUnspecifiedRscns,
+              t11FcRscnInChangedAttribRscns,
+              t11FcRscnOutChangedAttribRscns,
+              t11FcRscnInChangedServiceRscns,
+              t11FcRscnOutChangedServiceRscns,
+              t11FcRscnInChangedSwitchRscns,
+              t11FcRscnOutChangedSwitchRscns,
+              t11FcRscnInRemovedRscns,
+              t11FcRscnOutRemovedRscns
+            }
+    STATUS  current
+    DESCRIPTION
+           "A collection of objects for collecting RSCN-related
+           statistics."
+    ::= { t11FcRscnGroups 2 }
+
+t11FcRscnNotifyControlGroup  OBJECT-GROUP
+    OBJECTS { t11FcRscnIlsRejectNotifyEnable,
+              t11FcRscnElsRejectNotifyEnable,
+              t11FcRscnRejectedRequestString,
+              t11FcRscnRejectedRequestSource,
+              t11FcRscnRejectReasonCode,
+              t11FcRscnRejectReasonCodeExp,
+              t11FcRscnRejectReasonVendorCode
+            }
+    STATUS  current
+    DESCRIPTION
+           "A collection of notification control and
+           notification information objects."
+    ::= { t11FcRscnGroups 3 }
+
+t11FcRscnNotifyGroup   NOTIFICATION-GROUP
+    NOTIFICATIONS { t11FcRscnIlsRejectReqNotify,
+                    t11FcRscnElsRejectReqNotify
+                  }
+    STATUS        current
+    DESCRIPTION
+           "A collection of notifications for monitoring
+           ILS and ELS rejections by the RSCN module."
+    ::= { t11FcRscnGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-SP-AUTHENTICATION-MIB.mib b/snmp_builder/mibs/T11-FC-SP-AUTHENTICATION-MIB.mib
new file mode 100644
index 0000000..f42bba5
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-SP-AUTHENTICATION-MIB.mib
@@ -0,0 +1,920 @@
+T11-FC-SP-AUTHENTICATION-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+    NOTIFICATION-TYPE,
+    mib-2, Counter32, Unsigned32
+                                      FROM SNMPv2-SMI  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+                                      FROM SNMPv2-CONF -- [RFC2580]
+    StorageType, AutonomousType,
+    TruthValue, TimeStamp             FROM SNMPv2-TC   -- [RFC2579]
+    InterfaceIndex                    FROM IF-MIB      -- [RFC2863]
+    fcmInstanceIndex,
+    FcNameIdOrZero                    FROM FC-MGMT-MIB -- [RFC4044]
+    t11FamLocalSwitchWwn
+                       FROM T11-FC-FABRIC-ADDR-MGR-MIB -- [RFC4439]
+    T11FabricIndex                    FROM T11-TC-MIB  -- [RFC4439]
+    T11FcSpDhGroups,
+    T11FcSpHashFunctions,
+    T11FcSpSignFunctions,
+    T11FcSpLifetimeLeft,
+    T11FcSpLifetimeLeftUnits,
+    T11FcSpAuthRejectReasonCode,
+    T11FcSpAuthRejReasonCodeExp       FROM T11-FC-SP-TC-MIB;
+
+t11FcSpAuthenticationMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200808200000Z"
+    ORGANIZATION  "This MIB module was developed through the
+
+                  coordinated effort of two organizations:
+                  T11 began the development and the IETF (in
+                  the IMSS Working Group) finished it."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+           "This MIB module specifies the management information
+           required to manage the Authentication Protocols defined by
+           Fibre Channel's FC-SP specification.
+
+           This MIB module defines three tables:
+
+            - t11FcSpAuEntityTable is a table of Fibre Channel
+              entities that can be authenticated using FC-SP's
+              Authentication Protocols.
+
+            - t11FcSpAuIfStatTable is a table with one row for each
+              mapping of an Authentication entity onto an interface,
+              containing statistics information.
+
+            - t11FcSpAuRejectTable is a table of volatile information
+              about FC-SP Authentication Protocol transactions
+              that were most recently rejected.
+
+           Copyright (C) The IETF Trust (2008).  This version
+           of this MIB module is part of RFC 5324;  see the RFC
+           itself for full legal notices."
+    REVISION  "200808200000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 5324."
+    ::= { mib-2 176 }
+
+t11FcSpAuMIBNotifications
+                   OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 0 }
+t11FcSpAuMIBObjects
+                   OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 1 }
+t11FcSpAuMIBConformance
+                   OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 2 }
+
+t11FcSpAuMIBIdentities
+                   OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 3 }
+
+--
+-- OIDs defined for use as values of t11FcSpAuServerProtocol
+--
+
+t11FcSpAuServerProtocolRadius OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+           "This OID identifies RADIUS as the protocol used
+           to communicate with an External Server as part of
+           the process by which identities are verified.
+           In this case, information about the RADIUS Servers
+           is likely to be provided in radiusAuthServerExtTable
+           defined in the RADIUS-AUTH-CLIENT-MIB."
+    REFERENCE
+           "radiusAuthServerExtTable in 'RADIUS Authentication
+            Client MIB', RFC 4668, August 2006."
+    ::= { t11FcSpAuMIBIdentities 1 }
+
+t11FcSpAuServerProtocolDiameter OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+           "This OID identifies Diameter as the protocol used
+           to communicate with an External Server as part of
+           the process by which identities are verified."
+    REFERENCE
+           "RFC 3588, September 2003."
+    ::= { t11FcSpAuMIBIdentities 2 }
+
+t11FcSpAuServerProtocolTacacs OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+           "This OID identifies TACACS as the protocol used
+           to communicate with an External Server as part of
+           the process by which identities are verified."
+    REFERENCE
+           "RFC 1492, July 1993."
+    ::= { t11FcSpAuMIBIdentities 3 }
+
+--
+-- Configuration for the Authentication Protocols
+--
+
+t11FcSpAuEntityTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpAuEntityEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Fibre Channel entities that can be authenticated
+           using FC-SP's Authentication Protocols.
+
+           The purpose of an FC-SP Authentication Protocol is to verify
+           that a claimed name is associated with the claiming entity.
+           The Authentication Protocols can be used to authenticate
+           Nx_Ports, B_Ports, or Switches."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 3.2.25."
+    ::= { t11FcSpAuMIBObjects 1 }
+
+t11FcSpAuEntityEntry OBJECT-TYPE
+    SYNTAX       T11FcSpAuEntityEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Information about the configuration and capabilities of an
+           FC-SP entity (which is managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex) on a
+           particular Fabric with respect to FC-SP's Authentication
+           Protocols."
+    INDEX   { fcmInstanceIndex, t11FcSpAuEntityName,
+              t11FcSpAuFabricIndex }
+    ::= { t11FcSpAuEntityTable 1 }
+
+T11FcSpAuEntityEntry ::= SEQUENCE {
+    t11FcSpAuEntityName             FcNameIdOrZero,
+    t11FcSpAuFabricIndex            T11FabricIndex,
+    t11FcSpAuServerProtocol         AutonomousType,
+                                                   -- Config parameters
+    t11FcSpAuStorageType            StorageType,
+    t11FcSpAuSendRejNotifyEnable    TruthValue,
+    t11FcSpAuRcvRejNotifyEnable     TruthValue,
+    t11FcSpAuDefaultLifetime        T11FcSpLifetimeLeft,
+    t11FcSpAuDefaultLifetimeUnits   T11FcSpLifetimeLeftUnits,
+    t11FcSpAuRejectMaxRows          Unsigned32,
+                                                   -- Capabilities
+    t11FcSpAuDhChapHashFunctions    T11FcSpHashFunctions,
+    t11FcSpAuDhChapDhGroups         T11FcSpDhGroups,
+    t11FcSpAuFcapHashFunctions      T11FcSpHashFunctions,
+    t11FcSpAuFcapCertsSignFunctions T11FcSpSignFunctions,
+    t11FcSpAuFcapDhGroups           T11FcSpDhGroups,
+    t11FcSpAuFcpapHashFunctions     T11FcSpHashFunctions,
+    t11FcSpAuFcpapDhGroups          T11FcSpDhGroups
+
+}
+
+t11FcSpAuEntityName OBJECT-TYPE
+    SYNTAX     FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The name used to identify the FC-SP entity.
+
+           For entities that are Fibre Channel Switches, this value
+           corresponds to the Switch's value of fcmSwitchWWN.  For
+           entities other than Fibre Channel Switches, this value
+           corresponds to the value of fcmInstanceWwn for the
+           corresponding Fibre Channel management instance."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.3.
+            - fcmInstanceWwn & fcmSwitchWWN,
+              'Fibre Channel Management MIB', RFC 4044, May 2005."
+    ::= { t11FcSpAuEntityEntry 1 }
+
+t11FcSpAuFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a
+           particular Fabric to which the entity is attached."
+    ::= { t11FcSpAuEntityEntry 2 }
+
+t11FcSpAuServerProtocol OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The protocol, if any, used by the entity to communicate
+           with a third party (i.e., an External Server) as part of
+           the process by which it verifies DH-CHAP responses.  For
+           example, if the entity is using an external RADIUS server
+           to verify DH-CHAP responses, then this object will have
+           the value t11FcSpAuServerProtocolRadius.
+
+           The value, zeroDotZero, is used to indicate that no
+           protocol is being used to communicate with a third
+           party to verify DH-CHAP responses.
+
+           When no protocol is being used, or if the third party is
+
+           unreachable via the specified protocol, then locally
+           configured information (if any) may be used instead."
+    ::= { t11FcSpAuEntityEntry 3 }
+
+t11FcSpAuStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization of
+           configuration information related to an FC-SP
+           Entity on a particular Fabric: specifically, for
+           MIB objects in the row containing this object.
+
+           Even if an instance of this object has the value
+           'permanent(4)', none of the information in the
+           corresponding row of this table needs to be writable."
+    ::= { t11FcSpAuEntityEntry 4 }
+
+t11FcSpAuSendRejNotifyEnable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An indication of whether or not the entity should issue
+           t11FcSpAuRejectSentNotify notifications when sending
+           AUTH_Reject/SW_RJT/LS_RJT to reject an AUTH message.
+
+           If the value of the object is 'true', then this type of
+           notification is generated.  If the value is 'false',
+           this type of notification is not generated."
+    DEFVAL { false }
+    ::= { t11FcSpAuEntityEntry 5 }
+
+t11FcSpAuRcvRejNotifyEnable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An indication of whether or not the entity should issue
+           t11FcSpAuRejectReceivedNotify notifications on the receipt
+           of AUTH_Reject/SW_RJT/LS_RJT messages.
+
+           If the value of the object is 'true', then this type of
+           notification is generated.  If the value is 'false',
+           this type of notification is not generated."
+    DEFVAL { false }
+    ::= { t11FcSpAuEntityEntry 6 }
+
+t11FcSpAuDefaultLifetime OBJECT-TYPE
+    SYNTAX       T11FcSpLifetimeLeft
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "When the value of this object is non-zero, it specifies the
+           default value of a lifetime, specified in units given by
+           the corresponding instance of t11FcSpAuDefaultLifetimeUnits.
+           This default lifetime is to be used for any Security
+           Association that has no explicitly specified value for its
+           lifetime.
+
+           An SA's lifetime is either the time interval or the number
+           of passed bytes, after which the SA has to be terminated and
+           (if necessary) replaced with a new SA.
+
+           If this object is zero, then there is no default value for
+           lifetime."
+    DEFVAL       { 28800 }         -- 8 hours (in units of seconds)
+     ::= { t11FcSpAuEntityEntry 7 }
+
+t11FcSpAuDefaultLifetimeUnits OBJECT-TYPE
+    SYNTAX       T11FcSpLifetimeLeftUnits
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "The units in which the value of the corresponding
+           instance of t11FcSpAuDefaultLifetime specifies a
+           default lifetime for a Security Association that has
+           no explicitly-specified value for its lifetime."
+    DEFVAL       { seconds }
+    ::= { t11FcSpAuEntityEntry 8 }
+
+t11FcSpAuRejectMaxRows OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..1000)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "The maximum number of rows in the t11FcSpAuRejectTable for
+           this entity on this Fabric.  If and when an AUTH message is
+           rejected, and the t11FcSpAuRejectTable already contains this
+           maximum number of rows for the specific entity and Fabric,
+           the row containing the oldest information is discarded and
+           replaced by a row containing information about the new
+           rejection.
+
+           There will be less than this maximum number of rows in
+           the t11FcSpAuRejectTable in exceptional circumstances,
+           e.g., after an agent restart.
+
+           In an implementation that does not support the
+           t11FcSpAuRejectTable, this object will always be zero."
+    ::= { t11FcSpAuEntityEntry 9 }
+
+t11FcSpAuDhChapHashFunctions OBJECT-TYPE
+    SYNTAX     T11FcSpHashFunctions
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The hash functions that the entity supports when using
+           the DH-CHAP algorithm."
+    ::= { t11FcSpAuEntityEntry 10 }
+
+t11FcSpAuDhChapDhGroups OBJECT-TYPE
+    SYNTAX     T11FcSpDhGroups
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The DH Groups that the entity supports when using the
+           DH-CHAP algorithm in FC-SP."
+    ::= { t11FcSpAuEntityEntry 11 }
+
+t11FcSpAuFcapHashFunctions OBJECT-TYPE
+    SYNTAX     T11FcSpHashFunctions
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The hash functions that the entity supports when
+           specified as Protocol Parameters in the AUTH_Negotiate
+           message for FCAP in FC-SP."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.5.2.1 and table 28."
+    ::= { t11FcSpAuEntityEntry 12 }
+
+t11FcSpAuFcapCertsSignFunctions OBJECT-TYPE
+    SYNTAX     T11FcSpSignFunctions
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The signature functions used within certificates that
+           the entity supports when using FCAP in FC-SP."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.5.4.2 and tables 38 & 39."
+    ::= { t11FcSpAuEntityEntry 13 }
+
+t11FcSpAuFcapDhGroups OBJECT-TYPE
+    SYNTAX     T11FcSpDhGroups
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The DH Groups that the entity supports when using the
+           FCAP algorithm in FC-SP."
+    ::= { t11FcSpAuEntityEntry 14 }
+
+t11FcSpAuFcpapHashFunctions OBJECT-TYPE
+    SYNTAX     T11FcSpHashFunctions
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The hash functions that the entity supports when using
+           the FCPAP algorithm in FC-SP."
+    ::= { t11FcSpAuEntityEntry 15 }
+
+t11FcSpAuFcpapDhGroups OBJECT-TYPE
+    SYNTAX     T11FcSpDhGroups
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The DH Groups that the entity supports when using the
+           FCPAP algorithm in FC-SP."
+    ::= { t11FcSpAuEntityEntry 16 }
+
+--
+-- The Mapping of Authentication Entities onto Interfaces
+-- and Statistics
+--
+
+t11FcSpAuIfStatTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpAuIfStatEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each FC-SP Authentication entity can operate on one or more
+           interfaces, but at most one of them can operate on each
+           interface.  A row in this table exists for each interface
+           to each Fabric on which each Authentication entity operates.
+
+           The objects within this table contain statistics information
+           related to FC-SP's Authentication Protocols."
+    ::= { t11FcSpAuMIBObjects 2 }
+
+t11FcSpAuIfStatEntry OBJECT-TYPE
+    SYNTAX       T11FcSpAuIfStatEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A set of Authentication Protocols statistics for an FC-SP
+           Authentication entity (identified by t11FcSpAuEntityName) on
+           one of its interfaces to a particular Fabric, which is
+           managed within the Fibre Channel management instance
+           identified by fcmInstanceIndex."
+    INDEX   { fcmInstanceIndex, t11FcSpAuEntityName,
+              t11FcSpAuIfStatInterfaceIndex,
+              t11FcSpAuIfStatFabricIndex }
+    ::= { t11FcSpAuIfStatTable 1 }
+
+T11FcSpAuIfStatEntry ::= SEQUENCE {
+    t11FcSpAuIfStatInterfaceIndex        InterfaceIndex,
+    t11FcSpAuIfStatFabricIndex           T11FabricIndex,
+    t11FcSpAuIfStatTimeouts              Counter32,
+    t11FcSpAuIfStatInAcceptedMsgs        Counter32,
+    t11FcSpAuIfStatInLsSwRejectedMsgs    Counter32,
+    t11FcSpAuIfStatInAuthRejectedMsgs    Counter32,
+    t11FcSpAuIfStatOutAcceptedMsgs       Counter32,
+    t11FcSpAuIfStatOutLsSwRejectedMsgs   Counter32,
+    t11FcSpAuIfStatOutAuthRejectedMsgs   Counter32
+}
+
+t11FcSpAuIfStatInterfaceIndex OBJECT-TYPE
+    SYNTAX       InterfaceIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The interface on which the FC-SP Authentication entity
+           operates and for which the statistics are collected."
+    ::= { t11FcSpAuIfStatEntry 1 }
+
+t11FcSpAuIfStatFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value identifying the particular Fabric for
+           which the statistics are collected."
+    ::= { t11FcSpAuIfStatEntry 2 }
+
+t11FcSpAuIfStatTimeouts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages sent
+           by the particular entity on the particular Fabric on the
+           particular interface, for which no response was received
+           within a timeout period.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.11."
+    ::= { t11FcSpAuIfStatEntry 3 }
+
+t11FcSpAuIfStatInAcceptedMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages
+           received and accepted by the particular entity on the
+           particular Fabric on the particular interface.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.1."
+    ::= { t11FcSpAuIfStatEntry 4 }
+
+t11FcSpAuIfStatInLsSwRejectedMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages
+           received by the particular entity on the particular Fabric
+           on the particular interface, and rejected by a lower-level
+           (SW_RJT or LS_RJT) reject.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.1."
+    ::= { t11FcSpAuIfStatEntry 5 }
+
+t11FcSpAuIfStatInAuthRejectedMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages
+           received by the particular entity on the particular Fabric
+           on the particular interface, and rejected by an AUTH_Reject
+           message.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.1."
+    ::= { t11FcSpAuIfStatEntry 6 }
+
+t11FcSpAuIfStatOutAcceptedMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages sent
+           by the particular entity on the particular Fabric on the
+           particular interface, which were accepted by the
+           neighboring entity, i.e., not rejected by an AUTH_Reject
+           message, nor by a lower-level (SW_RJT or LS_RJT) reject.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.1."
+    ::= { t11FcSpAuIfStatEntry 7 }
+
+t11FcSpAuIfStatOutLsSwRejectedMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages sent
+           by the particular entity on the particular Fabric on the
+           particular interface, which were rejected by a lower-level
+           (SW_RJT or LS_RJT) reject.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.1."
+    ::= { t11FcSpAuIfStatEntry 8 }
+
+t11FcSpAuIfStatOutAuthRejectedMsgs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Authentication Protocol messages sent
+           by the particular entity on the particular Fabric on the
+           particular interface, which were rejected by an
+           AUTH_Reject message.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.1."
+    ::= { t11FcSpAuIfStatEntry 9 }
+
+--
+-- Information about Authentication Protocol Transactions
+-- which were recently rejected
+--
+
+t11FcSpAuRejectTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpAuRejectEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of volatile information about FC-SP Authentication
+           Protocol transactions that were recently rejected with
+           an AUTH_Reject message, or with an SW_RJT/LS_RJT.
+
+           The maximum number of rows in this table for a specific
+           entity on a specific Fabric is given by the value of the
+           corresponding instance of t11FcSpAuRejectMaxRows.
+
+           The syntax of t11FcSpAuRejTimestamp is TimeStamp, and thus
+           its value rolls over to zero after approximately 497 days.
+           To avoid any confusion due to such a rollover, rows should
+           be deleted from this table before they are 497 days old.
+
+           This table will be empty if no AUTH_Reject messages,
+           nor any SW_RJT/LS_RJT's rejecting an AUTH message,
+           have been sent or received since the last
+           re-initialization of the agent."
+    ::= { t11FcSpAuMIBObjects 3 }
+
+t11FcSpAuRejectEntry OBJECT-TYPE
+    SYNTAX       T11FcSpAuRejectEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Information about one AUTH message (either an
+           AUTH_ELS or an AUTH_ILS) that was rejected with an
+           AUTH_Reject, SW_RJT or LS_RJT message, sent/received by
+           the entity identified by values of fcmInstanceIndex and
+           t11FcSpAuEntityName, on an interface to a particular
+           Fabric."
+    INDEX   { fcmInstanceIndex, t11FcSpAuEntityName,
+              t11FcSpAuRejInterfaceIndex, t11FcSpAuRejFabricIndex,
+              t11FcSpAuRejTimestamp }
+    ::= { t11FcSpAuRejectTable 1 }
+
+T11FcSpAuRejectEntry ::= SEQUENCE {
+    t11FcSpAuRejInterfaceIndex        InterfaceIndex,
+    t11FcSpAuRejFabricIndex           T11FabricIndex,
+    t11FcSpAuRejTimestamp             TimeStamp,
+    t11FcSpAuRejDirection             INTEGER,
+    t11FcSpAuRejType                  INTEGER,
+    t11FcSpAuRejAuthMsgString         OCTET STRING,
+    t11FcSpAuRejReasonCode            T11FcSpAuthRejectReasonCode,
+    t11FcSpAuRejReasonCodeExp         T11FcSpAuthRejReasonCodeExp
+}
+
+t11FcSpAuRejInterfaceIndex OBJECT-TYPE
+    SYNTAX       InterfaceIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The interface on which the rejected AUTH message was
+           sent or received."
+    ::= { t11FcSpAuRejectEntry 1 }
+
+t11FcSpAuRejFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value identifying the particular Fabric on
+
+           which the rejected AUTH message was sent or received."
+    ::= { t11FcSpAuRejectEntry 2 }
+
+t11FcSpAuRejTimestamp OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The time at which the AUTH message was rejected.  If two
+           rows have the same value of this object for the same
+           entity on the same interface and Fabric, the value of
+           this object for the later one is incremented by one."
+    ::= { t11FcSpAuRejectEntry 3 }
+
+t11FcSpAuRejDirection OBJECT-TYPE
+    SYNTAX       INTEGER { sent(1), received(2) }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "An indication of whether the rejection was sent or
+           received by the identified entity.
+
+           The value 'sent(1)' corresponds to a notification of
+           type t11FcSpAuRejectSentNotify; the value 'received(2)'
+           corresponds to t11FcSpAuRejectReceivedNotify."
+    ::= { t11FcSpAuRejectEntry 4 }
+
+t11FcSpAuRejType OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     authReject(1),
+                     swRjt(2),
+                     lsRjt(3)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "An indication of whether the rejection was an
+           AUTH_Reject, an SW_RJT or an LS_RJT."
+    ::= { t11FcSpAuRejectEntry 5 }
+
+t11FcSpAuRejAuthMsgString OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE(0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The binary content of the AUTH message that was
+           rejected, formatted as an octet string (in network
+           byte order) containing the content of the message.
+
+           If the binary content is unavailable, then the
+           length is zero.  Otherwise, the first octet of the
+           message identifies the type of message:
+
+              '90'h - an AUTH_ELS, see Table 6 in FC-SP,
+              '40'h - an AUTH_ILS, see Table 3 in FC-SP, or
+              '41'h - an B_AUTH_ILS, see Table 5 in FC-SP.
+
+           and the remainder of the message may be truncated."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Tables 3, 5 and 6."
+    ::= { t11FcSpAuRejectEntry 6 }
+
+t11FcSpAuRejReasonCode OBJECT-TYPE
+    SYNTAX       T11FcSpAuthRejectReasonCode
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The reason code with which this AUTH message was
+           rejected."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 17, 48, 52."
+    ::= { t11FcSpAuRejectEntry 7 }
+
+t11FcSpAuRejReasonCodeExp OBJECT-TYPE
+    SYNTAX       T11FcSpAuthRejReasonCodeExp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The reason code explanation with which this AUTH
+           message was rejected."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 17, 48, 52."
+    ::= { t11FcSpAuRejectEntry 8 }
+
+--
+-- Notifications
+--
+
+t11FcSpAuRejectSentNotify NOTIFICATION-TYPE
+    OBJECTS   { t11FamLocalSwitchWwn,
+                t11FcSpAuRejAuthMsgString,
+                t11FcSpAuRejType,
+                t11FcSpAuRejReasonCode,
+                t11FcSpAuRejReasonCodeExp }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that a Switch (identified
+           by the value of t11FamLocalSwitchWwn) has sent a reject
+           message of the type indicated by t11FcSpAuRejType in
+           response to an AUTH message.
+
+           The content of the rejected AUTH message is given by the
+           value of t11FcSpAuRejAuthMsgString.  The values of the
+           Reason Code and Reason Code Explanation in the
+           AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
+           t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp."
+    ::= { t11FcSpAuMIBNotifications 1 }
+
+t11FcSpAuRejectReceivedNotify NOTIFICATION-TYPE
+    OBJECTS   { t11FamLocalSwitchWwn,
+                t11FcSpAuRejAuthMsgString,
+                t11FcSpAuRejType,
+                t11FcSpAuRejReasonCode,
+                t11FcSpAuRejReasonCodeExp }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that a Switch (identified
+           by the value of t11FamLocalSwitchWwn) has received a
+           reject message of the type indicated by t11FcSpAuRejType
+           in response to an AUTH message.
+
+           The content of the rejected AUTH message is given by the
+           value of t11FcSpAuRejAuthMsgString.  The values of the
+           Reason Code and Reason Code Explanation in the
+           AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
+           t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp."
+    ::= { t11FcSpAuMIBNotifications 2 }
+
+--
+-- Conformance
+--
+
+t11FcSpAuMIBCompliances
+                  OBJECT IDENTIFIER ::= { t11FcSpAuMIBConformance 1 }
+t11FcSpAuMIBGroups
+                  OBJECT IDENTIFIER ::= { t11FcSpAuMIBConformance 2 }
+
+t11FcSpAuMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+           "The compliance statement for entities that
+           implement one or more of the Authentication Protocols
+           defined in FC-SP."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { t11FcSpAuGeneralGroup,
+                           t11FcSpAuRejectedGroup,
+                           t11FcSpAuNotificationGroup }
+
+        GROUP      t11FcSpAuIfStatsGroup
+        DESCRIPTION
+               "These counters, of particular FC-SP messages and
+               events, are mandatory only for those systems that
+               count such messages/events."
+
+-- Write access is not required for any objects in this MIB module:
+
+        OBJECT     t11FcSpAuStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcSpAuSendRejNotifyEnable
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcSpAuRcvRejNotifyEnable
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcSpAuDefaultLifetime
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcSpAuDefaultLifetimeUnits
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+
+        OBJECT     t11FcSpAuRejectMaxRows
+        MIN-ACCESS read-only
+        DESCRIPTION
+               "Write access is not required."
+        ::= { t11FcSpAuMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FcSpAuGeneralGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpAuServerProtocol,
+               t11FcSpAuStorageType,
+               t11FcSpAuSendRejNotifyEnable,
+               t11FcSpAuRcvRejNotifyEnable,
+               t11FcSpAuDefaultLifetime,
+               t11FcSpAuDefaultLifetimeUnits,
+               t11FcSpAuRejectMaxRows,
+               t11FcSpAuDhChapHashFunctions,
+               t11FcSpAuDhChapDhGroups,
+               t11FcSpAuFcapHashFunctions,
+               t11FcSpAuFcapCertsSignFunctions,
+               t11FcSpAuFcapDhGroups,
+               t11FcSpAuFcpapHashFunctions,
+               t11FcSpAuFcpapDhGroups,
+               t11FcSpAuIfStatTimeouts }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for the capabilities and
+           configuration parameters of FC-SP's Authentication
+           Protocols.  The inclusion of t11FcSpAuIfStatTimeouts
+           in this group provides information on mappings of
+           Authentication entities onto interfaces."
+    ::= { t11FcSpAuMIBGroups 1 }
+
+t11FcSpAuIfStatsGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpAuIfStatInAcceptedMsgs,
+               t11FcSpAuIfStatInLsSwRejectedMsgs,
+               t11FcSpAuIfStatInAuthRejectedMsgs,
+               t11FcSpAuIfStatOutAcceptedMsgs,
+               t11FcSpAuIfStatOutLsSwRejectedMsgs,
+               t11FcSpAuIfStatOutAuthRejectedMsgs }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for monitoring the
+           operations of FC-SP's Authentication Protocols."
+    ::= { t11FcSpAuMIBGroups 2 }
+
+t11FcSpAuRejectedGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpAuRejDirection,
+               t11FcSpAuRejType,
+               t11FcSpAuRejAuthMsgString,
+               t11FcSpAuRejReasonCode,
+               t11FcSpAuRejReasonCodeExp }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects holding information concerning
+           FC-SP Authentication Protocol transactions that were
+           recently rejected with an AUTH_Reject, with an SW_RJT,
+           or with an LS_RJT."
+    ::= { t11FcSpAuMIBGroups 3 }
+
+t11FcSpAuNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS  { t11FcSpAuRejectSentNotify,
+                     t11FcSpAuRejectReceivedNotify }
+    STATUS   current
+    DESCRIPTION
+           "A collection of notifications for use in the management
+           of FC-SP's Authentication Protocols."
+    ::= { t11FcSpAuMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-SP-POLICY-MIB.mib b/snmp_builder/mibs/T11-FC-SP-POLICY-MIB.mib
new file mode 100644
index 0000000..c51b6ce
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-SP-POLICY-MIB.mib
@@ -0,0 +1,4274 @@
+T11-FC-SP-POLICY-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
+    Counter32, Unsigned32
+                          FROM SNMPv2-SMI              -- [RFC2578]
+    RowStatus, StorageType, TimeStamp,
+    TruthValue            FROM SNMPv2-TC               -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+                          FROM SNMPv2-CONF             -- [RFC2580]
+    SnmpAdminString       FROM SNMP-FRAMEWORK-MIB      -- [RFC3411]
+    InetAddress, InetPortNumber,
+    InetAddressType       FROM INET-ADDRESS-MIB        -- [RFC4001]
+    fcmInstanceIndex,
+    FcNameIdOrZero,
+    FcDomainIdOrZero      FROM FC-MGMT-MIB             -- [RFC4044]
+    T11NsGs4RejectReasonCode
+                          FROM T11-FC-NAME-SERVER-MIB  -- [RFC4438]
+    T11FabricIndex        FROM T11-TC-MIB              -- [RFC4439]
+    T11FcSpAlphaNumName,
+    T11FcSpAlphaNumNameOrAbsent,
+    T11FcSpPolicyName,
+    T11FcSpPolicyNameType,
+    T11FcSpPolicyObjectType,
+    T11FcSpPolicyHashFormat,
+    T11FcSpPolicyHashValue,
+    T11FcSpHashCalculationStatus   FROM T11-FC-SP-TC-MIB;
+
+t11FcSpPolicyMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200808200000Z"
+    ORGANIZATION  "This MIB module was developed through the
+                  coordinated effort of two organizations:
+                  T11 began the development and the IETF (in
+                  the IMSS Working Group) finished it."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+           "This MIB module specifies the management information
+           required to manage Fabric Policies as defined by Fibre
+           Channel's FC-SP specification.
+
+           FC-SP uses the term 'Policy Objects', sometimes abbreviated
+           to just 'Objects', to refer to containers used to hold the
+           data by which Fabric Policies are specified/stored.  This
+           obviously has the potential to cause confusion between
+           'Policy Objects' and 'MIB objects'.  The DESCRIPTIONs in
+           this MIB module attempt to avoid such confusion by the use
+           of different adjectives and capitalization, even though such
+           mechanisms are less effective when used in descriptors.
+
+           Some types of Policy Objects contain multiple items of
+           information, each of which are held in the same format
+           within the Policy Object.  In such cases, FC-SP uses the
+           term 'Entry' to describe each instance of the common format.
+           For example, FC-SP defines an Attribute Policy Object as
+           containing one or more 'Attribute Entries'.  Again, this MIB
+           module attempts to avoid confusion by the use of adjectives
+           and capitalization to distinguish an Entry within a Policy
+           Object from an entry within a MIB table.
+
+           A Fabric's database of Policy Objects consists of a set of
+           active Objects that are to be enforced by that Fabric, as
+           well as non-active Objects that are not enforced.
+           Operations defined (in FC-SP) for Policy Management are:
+
+            - Add/Get/Remove operations on individual non-active
+              Policy Objects,
+            - Activate/Deactivate operations on a Policy Summary
+              Object, and
+            - Get operations on the active Policy Summary Object
+              and/or on individual active Policy Objects.
+
+           This MIB module has five parts:
+
+            1) Active Policy Objects - read-only MIB objects
+               representing the set of active Policy Objects for
+               each Fabric,
+            2) Activate/Deactivate Operations
+
+               - a read-write MIB object to invoke an Activate
+                 operation of the policies specified via a non-active
+                 Policy Summary Object, and
+               - a read-write MIB object to invoke a Deactivate
+                 operation.
+
+            3) Non-active Policy Objects
+               - read-create MIB objects to allow the creation of
+                 non-active Policy Summary Objects (which reference
+                 non-active Policy Objects), and
+               - read-create MIB objects representing non-active
+                 Policy Objects.
+
+            4) Statistics
+
+            5) Control information and Notifications
+
+           Copyright (C) The IETF Trust (2008).  This version
+           of this MIB module is part of RFC 5324;  see the RFC
+           itself for full legal notices."
+    REVISION  "200808200000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 5324."
+    ::= { mib-2 178 }
+
+t11FcSpPoMIBNotifications  OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 0 }
+t11FcSpPoMIBObjects        OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 1 }
+t11FcSpPoMIBConformance    OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 2 }
+t11FcSpPoActive         OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 1 }
+t11FcSpPoOperations     OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 2 }
+t11FcSpPoNonActive      OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 3 }
+t11FcSpPoStatistics     OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 4 }
+t11FcSpPoControl        OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 5 }
+
+--
+--  Part 1 - Active Policy Objects
+--
+
+t11FcSpPoTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing top-level information about active
+           FC-SP policies on various Fabrics."
+    ::= { t11FcSpPoActive 1 }
+
+t11FcSpPoEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about active FC-SP policies
+           for a particular Fabric, managed as part of the Fibre
+           Channel management instance identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex }
+    ::= { t11FcSpPoTable 1 }
+
+T11FcSpPoEntry ::= SEQUENCE {
+    t11FcSpPoFabricIndex           T11FabricIndex,
+    t11FcSpPoPolicySummaryObjName  T11FcSpAlphaNumName,
+    t11FcSpPoAdminFabricName       FcNameIdOrZero,
+    t11FcSpPoActivatedTimeStamp    TimeStamp
+}
+
+t11FcSpPoFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Fabric."
+    ::= { t11FcSpPoEntry 1 }
+
+t11FcSpPoPolicySummaryObjName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The name of this Fabric's (active) Policy Summary Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3 and table 104."
+    ::= { t11FcSpPoEntry 2 }
+
+t11FcSpPoAdminFabricName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The administratively-specified name for this Fabric, as
+           specified in the active Switch Membership List Object.
+           This value is meaningful only when Static Domain_IDs are
+           in use in a Fabric (see FC-SW-4).  Static Domain_IDs are
+           administratively enabled by a setting of the Switch Flags
+
+           in each Switch Entry in the Switch Membership List Object.
+           If Static Domain_IDs are not in use, this value might be
+           '0000000000000000'h.
+
+           The t11FamEnable, t11FamFabricName, and
+           t11FamConfigDomainIdType objects defined in the
+           T11-FC-FABRIC-ADDR-MGR-MIB module are also concerned with
+           the use of an administratively-specified name for a Fabric
+           and Static Domain_IDs.  When FC-SP Policy is in use in a
+           Fabric, the values of t11FamEnable, t11FamFabricName, and
+           t11FamConfigDomainIdType must be read-only and reflect the
+           active Policy Objects.  For example, the value of
+           t11FamFabricName must reflect the value of
+           t11FcSpPoAdminFabricName."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 108.
+            - Fibre Channel - Switch Fabric-4 (FC-SW-4),
+              ANSI INCITS 418-2006, April 2006, section 7.1.
+            - Fibre Channel Fabric Address Manager MIB', RFC 4439,
+              March 2006."
+    ::= { t11FcSpPoEntry 3 }
+
+t11FcSpPoActivatedTimeStamp OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of sysUpTime at which this Fabric's Policy
+           Summary Object was last activated, or zero if the same
+           Policy Summary Object has been active since the last
+           restart of the management system."
+    ::= { t11FcSpPoEntry 4 }
+
+--
+-- The table of Policy Summary Objects
+--
+
+t11FcSpPoSummaryTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoSummaryEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of information about active Policy Objects listed
+           within FC-SP Policy Summary Objects."
+    ::= { t11FcSpPoActive 2 }
+
+t11FcSpPoSummaryEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoSummaryEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one of the active
+           Policy Objects listed within the Policy Summary Object for
+           the Fabric identified by t11FcSpPoFabricIndex and managed
+           within the Fibre Channel management instance identified by
+           fcmInstanceIndex.
+
+           How many Policy Objects of a given type can be active at
+           any one time for a given Fabric depends on the type, as
+           specified in FC-SP.  For some types, it is one per Fabric;
+           for other types, more than one can be active per Fabric.
+           In both of these cases, the absence of any entries in this
+           table for a particular type is equivalent to there being one
+           Policy Object of that type that is empty, e.g., a Switch
+           Membership List Object that identifies zero Switches."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3 and table 104."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoSummaryPolicyNameType,
+             t11FcSpPoSummaryPolicyName }
+    ::= { t11FcSpPoSummaryTable 1 }
+
+T11FcSpPoSummaryEntry ::= SEQUENCE {
+    t11FcSpPoSummaryPolicyNameType  T11FcSpPolicyNameType,
+    t11FcSpPoSummaryPolicyName      T11FcSpPolicyName,
+    t11FcSpPoSummaryPolicyType      T11FcSpPolicyObjectType,
+    t11FcSpPoSummaryHashFormat      T11FcSpPolicyHashFormat,
+    t11FcSpPoSummaryHashValue       T11FcSpPolicyHashValue
+}
+
+t11FcSpPoSummaryPolicyNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     alphaNumericName(7)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The combination of t11FcSpPoSummaryPolicyNameType and
+           t11FcSpPoSummaryPolicyName specify the name of the Policy
+           Object contained in the Policy Summary Object.
+
+           The type of name is 'nodeName' if the value of the
+           corresponding instance of t11FcSpPoSummaryPolicyType is
+           'switchConnectivity', or 'alphaNumericName' otherwise."
+    ::= { t11FcSpPoSummaryEntry 1 }
+
+t11FcSpPoSummaryPolicyName OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The combination of t11FcSpPoSummaryPolicyNameType and
+           t11FcSpPoSummaryPolicyName specify the name of the Policy
+           Object contained in the Policy Summary Object."
+    ::= { t11FcSpPoSummaryEntry 2 }
+
+t11FcSpPoSummaryPolicyType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyObjectType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The 'Identifier' that specifies the type of this
+           Policy Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3.1 and table 104."
+    ::= { t11FcSpPoSummaryEntry 3 }
+
+t11FcSpPoSummaryHashFormat OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashFormat
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The format of this Policy Object's hash value as
+           contained in the corresponding instance of the
+           t11FcSpPoSummaryHashValue object."
+    ::= { t11FcSpPoSummaryEntry 4 }
+
+t11FcSpPoSummaryHashValue OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The hash value of this Policy Object, in the format
+           identified by the corresponding instance of the
+           t11FcSpPoSummaryHashFormat object."
+    ::= { t11FcSpPoSummaryEntry 5 }
+
+--
+-- Switch Entries in Active Switch Membership List Objects
+--
+
+t11FcSpPoSwMembTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoSwMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Switch Entries in active Switch Membership List
+           Objects.
+
+           One Switch Membership List Object is represented by all
+           of the rows of this table that have the same values
+           of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoActive 3 }
+
+t11FcSpPoSwMembEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoSwMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Switch Entry
+           within the active Switch Membership List Object for the
+           Fabric identified by t11FcSpPoFabricIndex and managed
+           within the Fibre Channel management instance identified
+           by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoSwMembSwitchNameType, t11FcSpPoSwMembSwitchName }
+    ::= { t11FcSpPoSwMembTable 1 }
+
+T11FcSpPoSwMembEntry ::= SEQUENCE {
+    t11FcSpPoSwMembSwitchNameType   T11FcSpPolicyNameType,
+    t11FcSpPoSwMembSwitchName       FcNameIdOrZero,
+    t11FcSpPoSwMembSwitchFlags      BITS,
+    t11FcSpPoSwMembDomainID         FcDomainIdOrZero,
+    t11FcSpPoSwMembPolicyDataRole   INTEGER,
+    t11FcSpPoSwMembAuthBehaviour    BITS,
+    t11FcSpPoSwMembAttribute        T11FcSpAlphaNumNameOrAbsent
+}
+
+t11FcSpPoSwMembSwitchNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     restrictedNodeName(2),
+                     wildcard(5),
+                     restrictedWildcard(6)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is 'nodeName' or
+           'restrictedNodeName', then the combination of
+           this object and t11FcSpPoSwMembSwitchName specify the
+           Switch Name of this Switch Entry.
+
+           The membership is restricted or unrestricted based on the
+           name type.  Restricted membership means that the Switch is
+           not allowed to be part of the Fabric unless allowed by a
+           specific Switch Connectivity Object.  Unrestricted
+           membership means that the Switch is allowed to be part of
+           the Fabric unless disallowed by a specific Switch
+           Connectivity Object.
+
+           The values of 'wildcard' and 'restrictedWildcard' provide
+           the means to specify whether to allow/deny membership for
+           Switches not explicitly named in the Switch Membership
+           List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoSwMembEntry 1 }
+
+t11FcSpPoSwMembSwitchName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When the value of t11FcSpPoSwMembSwitchNameType is
+           'wildcard' or 'restrictedWildcard', this object has the
+           value '0000000000000000'h.
+
+           Otherwise, the combination of t11FcSpPoSwMembSwitchNameType
+           and this object specify the Switch Name of this Switch
+           Entry."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoSwMembEntry 2 }
+
+t11FcSpPoSwMembSwitchFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     staticDomainID(0),
+                     insistentDomainID(1),
+                     serialPortsAccess(2),
+                     physicalPortsAccess(3),
+                     managerRole(4)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "Configurable options in respect to the administration
+           of Policy Objects at this Switch:
+
+              'staticDomainID'      - if this bit is set, the Switch
+           uses the 'Static Domain_IDs behavior' (as defined in
+           FC-SW-4).  This bit needs to have the same setting for all
+           Switches in a Fabric's Switch Membership List Object, or
+           else the Fabric will partition.  If this bit is set, the
+           Domain_ID for the Switch is given by the corresponding
+           instance of t11FcSpPoSwMembDomainID.
+
+              'insistentDomainID'   -  if this bit is set, the
+           Switch uses the 'Insistent Domain_ID behavior' (see
+           t11FamConfigDomainId of T11-FC-FABRIC-ADDR-MGR-MIB), the
+           Domain_ID for the Switch is given by the corresponding
+           instance of t11FcSpPoSwMembDomainID.
+
+              'serialPortsAccess'   - the Switch allows management
+           through serial ports when and only when this bit is set.
+
+              'physicalPortsAccess' - the Switch allows management
+           through the physical panel when and only when this bit
+           is set.
+
+              'managerRole'         - the Switch is allowed to change
+           the Fabric Policy configuration (on receipt of any of the
+           EACA, Enhanced Stage Fabric Configuration (ESFC), Enhanced
+           Update Fabric Configuration (EUFC), ACA, SFC, or UFC
+           SW_ILSs) if and only if this bit is set.
+
+           Whenever a Fabric has Active Policy Objects, the value of
+           the t11FamConfigDomainIdType object defined in the
+           T11-FC-FABRIC-ADDR-MGR-MIB module must be read-only and
+           reflect the values of the 'staticDomainID' and
+           'insistentDomainID' bits of this object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 112.
+            - Fibre Channel - Switch Fabric-4 (FC-SW-4),
+              ANSI INCITS 418-2006, April 2006, section 7.1.
+            - t11FamConfigDomainIdType, T11-FC-FABRIC-ADDR-MGR-MIB,
+              Fibre Channel Fabric Address Manager MIB, RFC 4439."
+    ::= { t11FcSpPoSwMembEntry 3 }
+
+t11FcSpPoSwMembDomainID OBJECT-TYPE
+    SYNTAX       FcDomainIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The specified Domain_ID value when either of the
+           'staticDomainID' or 'insistentDomainID' bits are set in
+           the corresponding instance of t11FcSpPoSwMembSwitchFlags.
+
+           Whenever a Fabric has Active Policy Objects, the value
+           of the t11FamConfigDomainId object defined in the
+           T11-FC-FABRIC-ADDR-MGR-MIB module must be read-only and
+           reflect the value of this object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and tables 111 and 112.
+            - t11FamConfigDomainId, T11-FC-FABRIC-ADDR-MGR-MIB,
+              Fibre Channel Fabric Address Manager MIB, RFC 4439."
+    ::= { t11FcSpPoSwMembEntry 4 }
+
+t11FcSpPoSwMembPolicyDataRole OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     client(1),
+                     autonomous(2),
+                     server(3)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The role of the Switch in terms of which Policy data
+           it retains/maintains:
+
+             'client' - the Switch operates as a Client Switch.
+           A Client Switch maintains its own Switch Connectivity
+           Object and all Fabric-wide List Objects.  If FC-SP
+           Zoning is used, a Client Switch maintains only the
+           subset of the Active Zone Set that it requires to
+           enforce the current Fabric Zoning configuration.
+
+             'autonomous' -  the Switch operates as an Autonomous
+           Switch.  An Autonomous Switch maintains its own Switch
+           Connectivity Object and all Fabric-wide List Objects.
+           This is the same as 'client' except that if FC-SP Zoning
+           is used, an Autonomous Switch maintains a complete copy
+           of the Fabric Zoning Database.
+
+             'server' - the Switch operates as a Server Switch.
+           A Server Switch maintains all Fabric-wide List Objects
+           and the Switch Connectivity Objects of each Switch in
+           the Fabric.  If FC-SP Zoning is used, a Server Switch
+           maintains a complete copy of the Fabric Zoning Database."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 113."
+    ::= { t11FcSpPoSwMembEntry 5 }
+
+t11FcSpPoSwMembAuthBehaviour  OBJECT-TYPE
+    SYNTAX       BITS {
+                     mustAuthenticate(0),
+                     rejectIsFailure(1)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The authentication behaviour of the Switch:
+
+             'mustAuthenticate' - if this bit is set, all connections
+           between this Switch and neighbor Switches must be
+           authenticated.
+
+             'rejectIsFailure' - if this bit is set, the rejection of
+           an AUTH_Negotiate message must be considered as an
+           authentication failure by this Switch."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 114."
+    ::= { t11FcSpPoSwMembEntry 6 }
+
+t11FcSpPoSwMembAttribute  OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumNameOrAbsent
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The name of an active Attribute Policy Object that is
+           defined for this Switch, or the zero-length string.  The
+
+           zero-length string indicates that no Attribute Policy
+           Object is defined for this Switch."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoSwMembEntry 7 }
+
+--
+-- Node Entries in Active Node Membership List Objects
+--
+
+t11FcSpPoNoMembTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNoMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Node Entries in active Node Membership List
+           Objects.
+
+           One Node Membership List Object is represented by all
+           of the rows of this table that have the same values
+           of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    ::= { t11FcSpPoActive 4 }
+
+t11FcSpPoNoMembEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNoMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Node Entry
+           within the active Node Membership List Object for the
+           Fabric identified by t11FcSpPoFabricIndex and managed
+           within the Fibre Channel management instance identified
+           by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNoMembNodeNameType, t11FcSpPoNoMembNodeName }
+    ::= { t11FcSpPoNoMembTable 1 }
+
+T11FcSpPoNoMembEntry ::= SEQUENCE {
+    t11FcSpPoNoMembNodeNameType   T11FcSpPolicyNameType,
+    t11FcSpPoNoMembNodeName       FcNameIdOrZero,
+    t11FcSpPoNoMembFlags          BITS,
+    t11FcSpPoNoMembCtAccessIndex  Unsigned32,
+    t11FcSpPoNoMembAttribute      T11FcSpAlphaNumNameOrAbsent
+}
+
+t11FcSpPoNoMembNodeNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     restrictedNodeName(2),
+                     portName(3),
+                     restrictedPortName(4),
+                     wildcard(5),
+                     restrictedWildcard(6)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is 'wildcard' or
+           'restrictedWildcard', this Node Entry applies to Nodes not
+           explicitly named in the Node Membership List Object.
+
+           Otherwise, the combination of this object and
+           t11FcSpPoNoMembNodeName specify the name of this Node Entry
+           in the active Node Membership List Object.  A Node is
+           identified by its Node Name or by one or more of its Port
+           Names.
+
+           Restricted membership means that a Node is not allowed to be
+           connected to the Fabric unless allowed by a specific Switch
+           Connectivity Object.  Unrestricted membership means that a
+           Node is allowed to be connected to the Fabric unless
+           disallowed by a specific Switch Connectivity Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNoMembEntry 1 }
+
+t11FcSpPoNoMembNodeName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of t11FcSpPoNoMembNodeNameType is
+           'wildcard' or 'restrictedWildcard', this object has the
+           value '0000000000000000'h.
+
+           Otherwise, the combination of t11FcSpPoNoMembNodeNameType
+           and this object specify the name of this Node Entry is the
+           active Node Membership List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNoMembEntry 2 }
+
+t11FcSpPoNoMembFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     scsiEnclosureAccess(0),
+                     authenticationRequired(1)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "Configurable options in respect to the administration
+           of Policy Objects at this Node:
+
+                'scsiEnclosureAccess'      - the Node is allowed to
+           control any Switch through SCSI Enclosure Services if this
+           bit is set.  If a Switch does not support SCSI Enclosure
+           Services, this bit is ignored.
+
+                'authenticationRequired'   - the Node is required to
+           authenticate itself to any Switch to which it is connected
+           if and only if this bit is set."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 118."
+    ::= { t11FcSpPoNoMembEntry 3 }
+
+t11FcSpPoNoMembCtAccessIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is zero, then access by this
+           Node to Generic Services is not limited by a Common
+           Transport Access Specifier.
+
+           Otherwise, the limits are specified by the set of Common
+           Transport Access Descriptors contained in those rows of
+           the t11FcSpPoCtDescrTable for the same Fabric and for which
+           the value of t11FcSpPoCtDescrSpecifierIndex is the same as
+           the value of this object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.4.1 and tables 118/119/120/121."
+    ::= { t11FcSpPoNoMembEntry 4 }
+
+t11FcSpPoNoMembAttribute  OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumNameOrAbsent
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The name of an active Attribute Policy Object that is
+           defined for this Node, or the zero-length string.  The
+           zero-length string indicates that no Attribute Policy
+           Object is defined for this Node."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNoMembEntry 5 }
+
+--
+--
+-- Common Transport Access Descriptors
+--
+
+t11FcSpPoCtDescrTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoCtDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Common Transport Access Descriptors being used
+           within active Policy Objects.
+
+           A Common Transport Access Specifier is a list of Common
+           Transport Access Descriptors that specify whether a Node
+           is allowed to access a Generic Service or Sub-Server.
+
+           An active Common Transport Access Specifier is represented
+           by all rows of this table that have the same values of
+           fcmInstanceIndex, t11FcSpPoFabricIndex, and
+           t11FcSpPoCtDescrSpecifierIndex."
+    ::= { t11FcSpPoActive 5 }
+
+t11FcSpPoCtDescrEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoCtDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Common
+           Transport Access Descriptor of an active Common Transport
+           Access Specifier used within the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoCtDescrSpecifierIndex, t11FcSpPoCtDescrIndex }
+    ::= { t11FcSpPoCtDescrTable 1 }
+
+T11FcSpPoCtDescrEntry ::= SEQUENCE {
+    t11FcSpPoCtDescrSpecifierIndex   Unsigned32,
+    t11FcSpPoCtDescrIndex            Unsigned32,
+    t11FcSpPoCtDescrFlags            BITS,
+    t11FcSpPoCtDescrGsType           OCTET STRING,
+    t11FcSpPoCtDescrGsSubType        OCTET STRING
+}
+
+t11FcSpPoCtDescrSpecifierIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Common Transport Access Specifier within a Fabric."
+    ::= { t11FcSpPoCtDescrEntry 1 }
+
+t11FcSpPoCtDescrIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Common Transport Access Descriptor within a Common Transport
+           Access Specifier."
+    ::= { t11FcSpPoCtDescrEntry 2 }
+
+t11FcSpPoCtDescrFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     allow(0),
+                     gsTypeWildcard(1),
+                     gsSubTypeWildcard(2),
+                     readOnly(3)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The flag bits that specify how access is to be limited by
+           this Common Transport Access Descriptor:
+
+            - allow -- access to the specified Generic Service and
+              Server is allowed if this bit is set, and is to be denied
+              if this bit is not set.
+
+            - gsTypeWildcard -- if this bit is set, the Generic Service
+
+              to be allowed/denied is specified by the value of
+              t11FcSpPoCtDescrGsType.  If this bit is set, then the
+              gsSubTypeWildcard bit must not be set.
+
+            - gsSubTypeWildcard -- if this bit is set, the Generic
+              Service to be allowed/denied is specified by the value of
+              t11FcSpPoCtDescrGsSubType.  If this bit is set, then the
+              gsTypeWildcard bit must not be set.
+
+            - readOnly -- if this bit is set, then access is to be
+              granted only for reading."
+    ::= { t11FcSpPoCtDescrEntry 3 }
+
+t11FcSpPoCtDescrGsType OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The GS_Type of the Generic Service (e.g., the FC-GS-5
+           Management Service) that is subject to access control.
+           This value is ignored if the gsTypeWildcard bit is not set
+           in the corresponding value of t11FcSpPoCtDescrFlags."
+    REFERENCE
+           "- Fibre Channel - Generic Services-5 (FC-GS-5),
+              ANSI INCITS 427-2006, section 4.3.2.4."
+    ::= { t11FcSpPoCtDescrEntry 4 }
+
+t11FcSpPoCtDescrGsSubType OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The GS_Subtype of the Generic Server (e.g., the Fabric Zone
+           Server) that is subject to access control.  This value is
+           ignored if the gsSubTypeWildcard bit is not set in the
+           corresponding value of t11FcSpPoCtDescrFlags."
+    REFERENCE
+           "- Fibre Channel - Generic Services-5 (FC-GS-5),
+              ANSI INCITS 427-2006, section 4.3.2.5."
+    ::= { t11FcSpPoCtDescrEntry 5 }
+
+--
+--
+-- Switches/Nodes in Active Switch Connectivity Objects
+--
+
+t11FcSpPoSwConnTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoSwConnEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of active Switch Connectivity Objects.
+
+           A Switch Connectivity Object defines to which other
+           Switches or Nodes a particular Switch may/may not be
+           connected at the Node level and/or at the Port level."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1, tables 123/124."
+    ::= { t11FcSpPoActive 6 }
+
+t11FcSpPoSwConnEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoSwConnEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains the name of either a Switch or a Node
+           with which any port of a particular Switch, or a particular
+           port of that Switch, is allowed or not allowed to be
+           connected.
+
+           The particular Switch is on the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoSwConnSwitchName, t11FcSpPoSwConnAllowedType,
+             t11FcSpPoSwConnPortNameOrAll,
+             t11FcSpPoSwConnAllowedIndex }
+    ::= { t11FcSpPoSwConnTable 1 }
+
+T11FcSpPoSwConnEntry ::= SEQUENCE {
+    t11FcSpPoSwConnSwitchName       FcNameIdOrZero,
+    t11FcSpPoSwConnAllowedType      INTEGER,
+    t11FcSpPoSwConnPortNameOrAll    FcNameIdOrZero,
+    t11FcSpPoSwConnAllowedIndex     Unsigned32,
+    t11FcSpPoSwConnAllowedNameType  T11FcSpPolicyNameType,
+    t11FcSpPoSwConnAllowedName      T11FcSpPolicyName
+}
+
+t11FcSpPoSwConnSwitchName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the particular Switch for which this Switch
+
+           Connectivity Object specifies topology restrictions."
+    ::= { t11FcSpPoSwConnEntry 1 }
+
+t11FcSpPoSwConnAllowedType OBJECT-TYPE
+    SYNTAX       INTEGER { switch(1), node(2) }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether this row refers to
+           Switch-to-Switch or Switch-to-Node connectivity, i.e.,
+           whether the corresponding instance of
+           t11FcSpPoSwConnAllowedName specifies the name of a Switch
+           or the name of a Node."
+    ::= { t11FcSpPoSwConnEntry 2 }
+
+t11FcSpPoSwConnPortNameOrAll OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE(0 | 8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object specifies either the particular port to which
+           this topology restriction applies, or if the value is the
+           zero-length string, that the topology restriction applies
+           to all ports on the particular Switch.
+
+           In the FC-SP Policy Database, restrictions for a particular
+           port are formatted within a Port Connectivity Entry of a
+           Switch Connectivity Object, whereas restrictions for all
+           ports on the Switch are specified in the main part of a
+           Switch Connectivity Object, i.e., not in a Port Connectivity
+           Entry."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1, tables 123/124."
+    ::= { t11FcSpPoSwConnEntry 3 }
+
+t11FcSpPoSwConnAllowedIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When multiple rows in this table apply to the same
+           port(s) in the same Switch's Switch Connectivity Object,
+           this object provides a unique index value to distinguish
+           between such rows."
+    ::= { t11FcSpPoSwConnEntry 4 }
+
+t11FcSpPoSwConnAllowedNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     restrictedNodeName(2),
+                     portName(3),
+                     restrictedPortName(4),
+                     wildcard(5),
+                     restrictedWildcard(6)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is 'wildcard' or
+           'restrictedWildcard', this row specifies whether
+           connectivity is allowed/not allowed with entities not
+           explicitly named by other rows.
+
+           Otherwise, the combination of t11FcSpPoSwConnAllowedNameType
+           and t11FcSpPoSwConnAllowedName specify the name of:
+
+           - a Switch (if t11FcSpPoSwConnAllowedType = 'switch'), or
+           - a Node (if t11FcSpPoSwConnAllowedType = 'node')
+
+           to which connectivity is:
+
+            - allowed by 'nodeName' and 'portName',
+            - not allowed by 'restrictedNodeName' and
+              'restrictedPortName'."
+    ::= { t11FcSpPoSwConnEntry 5 }
+
+t11FcSpPoSwConnAllowedName OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyName (SIZE (8))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "If the value of t11FcSpPoSwConnAllowedNameType is
+           'wildcard' or 'restrictedWildcard', this object has the
+           value '0000000000000000'h.
+
+           Otherwise, the combination of t11FcSpPoSwConnAllowedNameType
+           and t11FcSpPoSwConnAllowedName specify the name of:
+
+           - a Switch (if t11FcSpPoSwConnAllowedType = 'switch'), or
+           - a Node (if t11FcSpPoSwConnAllowedType = 'node')
+
+           to which connectivity is allowed/restricted."
+    ::= { t11FcSpPoSwConnEntry 6 }
+
+--
+-- IP Management Entries in Active IP Management List Objects
+--
+
+t11FcSpPoIpMgmtTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoIpMgmtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of IP Management Entries in active IP Management
+           List Objects.  An IP Management List Object is a
+           Fabric-wide Policy Object that describes which IP hosts
+           are allowed to manage a Fabric.
+
+           One IP Management List Object is represented by all
+           of the rows of this table that have the same values
+           of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7"
+    ::= { t11FcSpPoActive 7 }
+
+t11FcSpPoIpMgmtEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoIpMgmtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one IP Management
+           Entry within the active IP Management List Object for the
+           Fabric identified by t11FcSpPoFabricIndex and managed
+           within the Fibre Channel management instance identified
+           by fcmInstanceIndex.
+
+           The Policy Object Name of an IP Management Entry Policy
+           Object is either an IPv6 Address Range or an IPv4 Address
+           Range, where in each case, the range is specified as two
+           addresses: the low and high ends of the range.  In
+           particular, since the Policy Object Name in this situation
+           can only be an IPv6 Address Range or an IPv4 Address Range,
+           it is represented here by three MIB objects defined as a
+           (InetAddressType, InetAddress, InetAddress) tuple, in which
+           the first address is the low end of the range, the second
+           address is the high end of the range, and both addresses are
+           of the type designated by InetAddressType.
+
+           In theory, the use of t11FcSpPoIpMgmtEntryNameLow and
+           t11FcSpPoIpMgmtEntryNameHigh (which both have the syntax
+
+           of InetAddress) in the INDEX could cause the need for
+           excessively long OIDs.  In practice, this can't happen
+           because FC-SP doesn't allow these objects to be specified
+           as DNS names."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoIpMgmtEntryNameType,
+             t11FcSpPoIpMgmtEntryNameLow,
+             t11FcSpPoIpMgmtEntryNameHigh }
+    ::= { t11FcSpPoIpMgmtTable 1 }
+
+T11FcSpPoIpMgmtEntry ::= SEQUENCE {
+    t11FcSpPoIpMgmtEntryNameType   InetAddressType,
+    t11FcSpPoIpMgmtEntryNameLow    InetAddress,
+    t11FcSpPoIpMgmtEntryNameHigh   InetAddress,
+    t11FcSpPoIpMgmtWkpIndex        Unsigned32,
+    t11FcSpPoIpMgmtAttribute       T11FcSpAlphaNumNameOrAbsent
+}
+
+t11FcSpPoIpMgmtEntryNameType OBJECT-TYPE
+    SYNTAX       InetAddressType
+                 -- INTEGER { ipv4(1), ipv6(2) }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The combination of t11FcSpPoIpMgmtNameType,
+           t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
+           specify the Internet address range of this IP Management
+           Entry in the IP Management List Object.
+
+           The FC-SP specification does not allow the use of a
+           DNS domain name to specify the address at the lower end
+           or at the higher end of the Internet address range, nor does
+           it allow the specification of a zone index.  Therefore, the
+           type of address must be one of: 'ipv4', or 'ipv6'."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              sections 7.1.7.1 & 7.1.2, tables 103/126."
+    ::= { t11FcSpPoIpMgmtEntry 1 }
+
+t11FcSpPoIpMgmtEntryNameLow OBJECT-TYPE
+    SYNTAX       InetAddress (SIZE(4 | 16))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The lower end of an Internet address range.  The type
+           of this address is given by the corresponding instance
+           of t11FcSpPoIpMgmtEntryNameType.
+
+           The combination of t11FcSpPoIpMgmtNameType,
+           t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
+           specify the Internet address range of this IP Management
+           Entry in the IP Management List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              sections 7.1.7.1 & 7.1.2, tables 103/126."
+    ::= { t11FcSpPoIpMgmtEntry 2 }
+
+t11FcSpPoIpMgmtEntryNameHigh OBJECT-TYPE
+    SYNTAX       InetAddress (SIZE(4 | 16))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The higher end of an Internet address range.  The type
+           of this address is given by the corresponding instance
+           of t11FcSpPoIpMgmtEntryNameType.
+
+           The combination of t11FcSpPoIpMgmtNameType,
+           t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
+           specify the Internet address range of this IP Management
+           Entry in the IP Management List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 7.1.7.1 & 7.1.2, tables 103/126."
+    ::= { t11FcSpPoIpMgmtEntry 3 }
+
+t11FcSpPoIpMgmtWkpIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object identifies the restrictions for IP management
+           access by IP hosts in this range of IP addresses, specified
+           as the set of Well-Known Protocols Access Descriptors
+           contained in those rows of the t11FcSpPoWkpDescrTable for
+           which the value of t11FcSpPoWkpDescrSpecifierIndex is the
+           same as the value of this object.  A value of zero indicates
+           that this IP Management Entry does not identify a Well-Known
+           Protocols Access Specifier."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and tables 127/129."
+    ::= { t11FcSpPoIpMgmtEntry 4 }
+
+t11FcSpPoIpMgmtAttribute OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumNameOrAbsent
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The name of an active Attribute Policy Object that is
+           defined for this IP Management entry or the zero-length
+           string.  The zero-length string indicates that no Attribute
+           Policy Object is defined for this IP Management entry."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 128."
+    ::= { t11FcSpPoIpMgmtEntry 5 }
+
+--
+-- Well-Known Protocol Access Descriptors
+--
+
+t11FcSpPoWkpDescrTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoWkpDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of the Well-Known Protocol Access Descriptors
+           being used within active Policy Objects.
+
+           A Well-Known Protocol Access Specifier is a list of
+           Well-Known Protocol Access Descriptors each of which
+           specifies a protocol number, a port number, and/or various
+           flags specifying how IP management access is restricted.
+
+           A Well-Known Protocol Transport Access Specifier is
+           represented by all rows of this table that have the
+           same values of fcmInstanceIndex, t11FcSpPoFabricIndex,
+           and t11FcSpPoWkpDescrSpecifierIndex."
+    ::= { t11FcSpPoActive 8 }
+
+t11FcSpPoWkpDescrEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoWkpDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Well-Known
+           Protocol Access Descriptor of a Well-Known Protocol
+           Access Specifier used within the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoWkpDescrSpecifierIndex, t11FcSpPoWkpDescrIndex }
+    ::= { t11FcSpPoWkpDescrTable 1 }
+
+T11FcSpPoWkpDescrEntry ::= SEQUENCE {
+    t11FcSpPoWkpDescrSpecifierIndex   Unsigned32,
+    t11FcSpPoWkpDescrIndex            Unsigned32,
+    t11FcSpPoWkpDescrFlags            BITS,
+    t11FcSpPoWkpDescrWkpNumber        Unsigned32,
+    t11FcSpPoWkpDescrDestPort         InetPortNumber
+}
+
+t11FcSpPoWkpDescrSpecifierIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Well-Known Protocol Access Specifier within a Fabric."
+    ::= { t11FcSpPoWkpDescrEntry 1 }
+
+t11FcSpPoWkpDescrIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Well-Known Protocol Access Descriptor within a Well-Known
+           Protocol Access Specifier."
+    ::= { t11FcSpPoWkpDescrEntry 2 }
+
+t11FcSpPoWkpDescrFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     allow(0),
+                     wkpWildcard(1),
+                     destPortWildcard(2),
+                     readOnly(3)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The flag bits that specify how access is to be limited by
+           this Well-Known Protocol Access Descriptor:
+
+            - allow -- IP management access using this protocol/port
+              is allowed if this bit is set, and to be denied if this
+              bit is not set.
+
+            - wkpWildcard -- if this bit is set, the IP Protocol number
+              of the Well-Known Protocol to be allowed/denied is
+              specified by the value of t11FcSpPoWkpDescrWkpNumber.
+
+            - destPortWildcard -- if this bit is set, the Destination
+              (TCP/UDP) Port number of the Well-Known Protocol to be
+              allowed/denied is specified by the value of
+              t11FcSpPoWkpDescrDestPort.
+
+            - readOnly -- if this bit is set, then access is to be
+              granted only for reading."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 131."
+    ::= { t11FcSpPoWkpDescrEntry 3 }
+
+t11FcSpPoWkpDescrWkpNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..255)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the 'wkpWildcard' bit is set in the corresponding
+           instance of t11FcSpPoWkpDescrFlags, this object specifies
+           the IP protocol number of the Well-Known Protocol."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 131.
+            - http://www.iana.org/assignments/protocol-numbers."
+    ::= { t11FcSpPoWkpDescrEntry 4 }
+
+t11FcSpPoWkpDescrDestPort OBJECT-TYPE
+    SYNTAX       InetPortNumber
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the 'destPortWildcard' bit is set in the corresponding
+           instance of t11FcSpPoWkpDescrFlags, this object specifies
+           the Destination (TCP/UDP) Port number of the Well-Known
+           Protocol.  When the 'destPortWildcard' bit is reset, this
+           object is ignored (and can have the value zero)."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 131.
+            - http://www.iana.org/assignments/port-numbers."
+    ::= { t11FcSpPoWkpDescrEntry 5 }
+
+--
+-- Attribute Entries in Active Attribute Policy Objects
+--
+
+t11FcSpPoAttribTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of the Attribute Policy Objects being used within
+           active Policy Objects.  In the FC-SP Policy Database, each
+           Attribute Policy Object consists of an Attribute Object Name
+           and a set of Attribute Entries.
+
+           An active Attribute Policy Object is represented by all the
+           Attribute Entries in this table that have the same value
+           of t11FcSpPoAttribName."
+    ::= { t11FcSpPoActive 9 }
+
+t11FcSpPoAttribEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each row contains information specific to an Attribute
+           Entry contained within an Attribute Policy Object that is
+           active within the Fabric identified by t11FcSpPoFabricIndex
+           and managed within the Fibre Channel management instance
+           identified by fcmInstanceIndex.
+
+           For some types of Attribute Policy Objects, it is valuable
+           to break out some semantically significant parts of the
+           Policy Object's value into their own individual MIB
+           objects; for example, to extract the one or more individual
+           Authentication Protocol Identifiers and associated
+           Authentication Protocol Parameters out of an Attribute
+           Object containing a 'AUTH_Negotiate Message Payload'.
+           For such types, another MIB table is defined to hold the
+           extracted values in MIB objects specific to the Attribute
+           Policy Object's type.  In such cases, the
+           t11FcSpPoAttribExtension object in this table points to the
+           other MIB table.
+
+           If the value of one Attribute Entry is too large (more than
+           256 bytes) to be contained within the value of one instance
+           of t11FcSpPoAttribValue, then one row in this table contains
+           the first 256 bytes, and one (or more) other row(s) in this
+           table contain the rest of the value."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoAttribName, t11FcSpPoAttribEntryIndex,
+             t11FcSpPoAttribPartIndex }
+    ::= { t11FcSpPoAttribTable 1 }
+
+T11FcSpPoAttribEntry ::= SEQUENCE {
+    t11FcSpPoAttribName         T11FcSpAlphaNumName,
+    t11FcSpPoAttribEntryIndex   Unsigned32,
+    t11FcSpPoAttribPartIndex    Unsigned32,
+    t11FcSpPoAttribType         Unsigned32,
+    t11FcSpPoAttribValue        OCTET STRING,
+    t11FcSpPoAttribExtension    OBJECT IDENTIFIER
+}
+
+t11FcSpPoAttribName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the Attribute Policy Object containing one
+           or more Attribute Entries."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.8.1 and table 133."
+    ::= { t11FcSpPoAttribEntry 1 }
+
+t11FcSpPoAttribEntryIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A unique value to distinguish this Attribute Entry
+           from other Attribute Entries contained in the same
+           Attribute Policy Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.8.1, tables 133/134."
+    ::= { t11FcSpPoAttribEntry 2 }
+
+t11FcSpPoAttribPartIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When the value of an Attribute Entry is shorter than 257
+           bytes, the whole value is contained in one instance of
+
+           t11FcSpPoAttribValue, and the value of this object is 1.
+
+           If the value of an Attribute Entry is longer than 256 bytes,
+           then that value is divided up on 256-byte boundaries such
+           that all parts are 256 bytes long except the last part, which
+           is shorter if necessary, with each such part contained in
+           a separate row of this table, and the value of this object
+           is set to the part number.  That is, this object has the
+           value of 1 for bytes 0-255, the value of 2 for bytes
+           256-511, etc."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.8.1, tables 134/135."
+    ::= { t11FcSpPoAttribEntry 3 }
+
+t11FcSpPoAttribType OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The type of attribute.  The first type to be defined is:
+
+           t11FcSpPoAttribType    t11FcSpPoAttribValue
+           ===================    ====================
+             '00000001'h          The AUTH_Negotiate Message Payload
+           "
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.8.1, tables 134/135 and table 10."
+    ::= { t11FcSpPoAttribEntry 4 }
+
+t11FcSpPoAttribValue OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..256))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of an Attribute Entry is divided up on 256-byte
+           boundaries such that all parts are 256 bytes long except the
+           last part, which is shorter if necessary, and each such part
+           is contained in a separate instance of this object.
+
+           The value of this object is independent of whether some
+           parts of its value are broken out into separate MIB objects
+           pointed to by the corresponding instance of
+           t11FcSpPoAttribExtension."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.8.1, tables 134/135 and table 10."
+    ::= { t11FcSpPoAttribEntry 5 }
+
+t11FcSpPoAttribExtension OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "For some types of Attribute Policy Object, the value of
+           this MIB object points to type-specific MIB objects that
+           contain individual/broken-out parts of the Attribute Policy
+           Object's value.  If this object doesn't point to such
+           type-specific MIB objects, then it contains the value:
+           zeroDotZero.
+
+           In particular, when the value of t11FcSpPoAttribType
+           indicates 'AUTH_Negotiate Message Payload', one or more
+           Authentication Protocol Identifiers and their associated
+           Authentication Protocol Parameters are embedded within the
+           value of the corresponding instance of t11FcSpPoAttribValue;
+           MIB objects to contain these individual values are defined
+           in the t11FcSpPoAuthProtTable.  Thus, for an 'AUTH_Negotiate
+           Message Payload' Attribute, the value of this object
+           contains an OID within the t11FcSpPoAuthProtTable, e.g.,
+           of the whole table, of an individual row, or of an individual
+           instance within the table."
+    ::= { t11FcSpPoAttribEntry 6 }
+
+--
+-- Auth. Protocol Parameters in Active Attribute Policy Objects
+--
+
+t11FcSpPoAuthProtTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoAuthProtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Authentication Protocol Identifier and
+           Authentication Protocol Parameters that are embedded in
+           Attribute Policy Objects being used within active Policy
+           Objects.
+
+           This table is used for Attribute Entries of Attribute Policy
+           Objects for which the value of t11FcSpPoAttribType indicates
+           'AUTH_Negotiate Message Payload' and the value of
+           t11FcSpPoAttribExtension contains the OID of this table."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              sections 5.3.2 & 7.1.8.1, tables 134/135 and tables
+              10/11."
+    ::= { t11FcSpPoActive 10 }
+
+t11FcSpPoAuthProtEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoAuthProtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about an Authentication
+           Protocol that is extracted out of the Attribute Entry
+           (identified by t11FcSpPoAttribEntryIndex) of the Policy
+           Attribute Object (identified by t11FcSpPoAttribName), which
+           is active within the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           If the value of one Attribute Protocol Parameters string is
+           too large (more than 256 bytes) to be contained within the
+           value of one instance of t11FcSpPoAuthProtParams, then one
+           row in this table contains the first 256 bytes, and one (or
+           more) other row(s) in this table contain the rest of the
+           value."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoAttribName, t11FcSpPoAttribEntryIndex,
+             t11FcSpPoAuthProtIdentifier,
+             t11FcSpPoAuthProtPartIndex }
+    ::= { t11FcSpPoAuthProtTable 1 }
+
+T11FcSpPoAuthProtEntry ::= SEQUENCE {
+    t11FcSpPoAuthProtIdentifier   Unsigned32,
+    t11FcSpPoAuthProtPartIndex    Unsigned32,
+    t11FcSpPoAuthProtParams       OCTET STRING
+}
+
+t11FcSpPoAuthProtIdentifier OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The Authentication Protocol Identifier:
+
+                    1      = DH-CHAP
+                    2      = FCAP
+                    3      = FCPAP
+
+                    4      = IKEv2
+                    5      = IKEv2-AUTH
+              240 thru 255 = Vendor Specific Protocols
+
+            all other values are 'Reserved' (by T11)."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.2, table 11."
+    ::= { t11FcSpPoAuthProtEntry 1 }
+
+t11FcSpPoAuthProtPartIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When the value of an Attribute Protocol Parameters string
+           is shorter than 257 bytes, the whole value is contained in
+           one instance of t11FcSpPoAuthProtParams, and the value of
+           this object is 1. (This includes the case when the Attribute
+           Protocol Parameters string is zero bytes in length.)
+
+           If the value of an Authentication Protocol Parameters string
+           is longer than 256 bytes, then that value is divided up on
+           256-byte boundaries such that all parts are 256 bytes long
+           except the last part, which is shorter if necessary, with
+           each such part contained in a separate row of this table,
+           and the value of this object is set to the part number.
+           That is, this object has the value of 1 for bytes 0-255,
+           the value of 2 for bytes 256-511, etc."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.2, table 10."
+    ::= { t11FcSpPoAuthProtEntry 2 }
+
+t11FcSpPoAuthProtParams OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..256))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of an Authentication Protocol Parameters string
+           is divided up on 256-byte boundaries such that all parts
+           are 256 bytes long except the last part, which is shorter
+           if necessary, and each such part is contained in a
+           separate instance of this object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.2, table 10."
+    ::= { t11FcSpPoAuthProtEntry 3 }
+
+--
+-- Part 2 - Activate/De-Activate Operations
+--
+
+--
+-- Objects to Invoke Activate/De-Activate Operations
+--
+
+t11FcSpPoOperTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoOperEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table that allows Activate and Deactivate operations
+           to be invoked for FC-SP Policies on various Fabrics.
+
+           Activating a new policy configuration is a two-step
+           process:
+
+            1) create a single Policy Summary Object as a set of rows
+               in the t11FcSpPoNaSummaryTable specifying a set of
+               Policy Objects that describe the new configuration; and
+            2) activate that Policy Summary Object using the
+               t11FcSpPoOperActivate object defined in this table.
+
+           Deactivating the current policy configuration is a one-step
+           process: the current Policy Summary Object is deactivated
+           using the t11FcSpPoOperDeActivate object."
+    ::= { t11FcSpPoOperations 1 }
+
+t11FcSpPoOperEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoOperEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry allows an Activate and/or Deactivate operation
+           to be invoked on a particular Fabric, which is managed as
+           part of the Fibre Channel management instance identified
+           by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex }
+    ::= { t11FcSpPoOperTable 1 }
+
+T11FcSpPoOperEntry ::= SEQUENCE {
+    t11FcSpPoOperActivate     T11FcSpAlphaNumName,
+    t11FcSpPoOperDeActivate   T11FcSpAlphaNumName,
+    t11FcSpPoOperResult       INTEGER,
+    t11FcSpPoOperFailCause    SnmpAdminString
+}
+
+t11FcSpPoOperActivate OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "Writing the name of a Policy Summary Object into this
+           object is a request to activate the policy configuration
+           described by the combination of all rows in
+           t11FcSpPoNaSummaryTable that have that name as their
+           value of t11FcSpPoNaSummaryName and are for the same
+           Fabric.
+
+           Before issuing such a request, the relevant rows in the
+           t11FcSpPoNaSummaryTable must exist and represent a complete
+           and consistent Policy Summary Object.  If they do not, the
+           request will fail, with t11FcSpPoOperResult having the
+           'badSummaryObject' value.
+
+           When read, the value of this object is always the zero-
+           length string.
+
+           Writing to this object does not delete (or in any way
+           affect) any rows in the MIB tables for non-active
+           Policy Objects."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.2"
+    ::= { t11FcSpPoOperEntry 1 }
+
+t11FcSpPoOperDeActivate OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "Writing the current value of t11FcSpPoPolicySummaryObjName
+           into this object (for a particular Fabric) is a request
+           to deactivate that Fabric's current policy configuration.
+           Writing any other value into this object is an error
+           (e.g., 'wrongValue').
+
+           When read, the value of this object is always the zero-
+           length string."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.3"
+    ::= { t11FcSpPoOperEntry 2 }
+
+t11FcSpPoOperResult OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     activateSuccess(1),
+                     badSummaryObject(2),
+                     activateFailure(3),
+                     deactivateSuccess(4),
+                     deactivateFailure(5),
+                     inProgress(6),
+                     none(7)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object indicates the status/result of the last
+           activation/deactivation that was invoked via the
+           corresponding instance of t11FcSpPoOperActivate or
+           t11FcSpPoOperDeActivate.
+
+           When the value of this object is 'inProgress', the
+           values of the corresponding instances of
+           t11FcSpPoOperActivate and t11FcSpPoOperDeActivate
+           cannot be modified.
+
+           The value 'badSummaryObject' indicates an activation
+           request that did not name a complete and consistent
+           Policy Summary Object.
+
+           The value 'none' indicates activation/deactivation
+           has not been attempted since the last restart of
+           the management system."
+    ::= { t11FcSpPoOperEntry 3 }
+
+t11FcSpPoOperFailCause OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..64))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "A textual message indicating the reason for the
+           most recent activation/deactivation failure, or the
+           zero-length string if no information is available
+           (e.g., because the corresponding instance of
+           t11FcSpPoOperResult has the value 'none').
+
+           When the corresponding instance of
+           t11FcSpPoOperResult is either 'activateFailure'
+           or 'deactivateFailure', the value of this object
+           indicates the reason for that failure."
+    ::= { t11FcSpPoOperEntry 4 }
+
+--
+-- Part 3 - Non-Active Policy Objects
+--
+
+--
+-- Non-Active Policy Summary Objects Available for Activation
+--
+
+t11FcSpPoNaSummaryTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaSummaryEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of non-active Policy Summary Objects available
+           to be activated.
+
+           The functionality of this table deviates slightly from FC-SP
+           in that FC-SP specifies that the only Policy Summary Object
+           is the Active one, i.e., FC-SP does not store non-active
+           Policy Summary Objects in the Policy Database.  Instead,
+           FC-SP requires a new Policy Summary Object to be created
+           for, and embedded within, every Activate (APS) request.
+           Thus, the newly created Policy Summary Object outlasts the
+           APS request only as the new active Policy Summary Object and
+           only if the APS succeeds.  In contrast, the Activate
+           operation provided by this MIB module consists of two steps:
+
+           1) create a non-active Policy Summary Object as a set of
+              entries in this table describing a new configuration;
+           2) activate a Policy Summary Object (stored as a set of
+              entries in this table) using t11FcSpPoOperActivate.
+
+           These two steps are only loosely connected, i.e., the result
+           of the first operation is a non-active Policy Summary Object
+           that is retained (in this table) even if it isn't
+           immediately activated.  Even after an attempt to activate
+           it succeeds or fails, a non-active Policy Summary Object
+           is not deleted, but is retained and still available for
+           subsequent modification/re-use."
+    ::= { t11FcSpPoNonActive 1 }
+
+t11FcSpPoNaSummaryEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaSummaryEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one non-active
+           Policy Object within a non-active Policy Summary Object
+           defined for potential use on the Fabric identified by
+           t11FcSpPoFabricIndex, and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           A non-active Policy Summary Object is described by a set
+           of entries in this table that have the same value of
+           t11FcSpPoNaSummaryName.
+
+           As and when a Policy Summary Object is activated using the
+           t11FcSpPoOperActivate object, if the activation is
+           successful, existing rows (if any) in MIB tables for active
+           Policy Objects are deleted and replaced by the appropriate
+           new set of rows.  Existing rows in this table and/or in
+           other tables for non-active Policy Objects are not
+           affected by the activate operation.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3 and table 104."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaSummaryName, t11FcSpPoNaSummaryPolicyType,
+             t11FcSpPoNaSummaryPolicyIndex }
+    ::= { t11FcSpPoNaSummaryTable 1 }
+
+T11FcSpPoNaSummaryEntry ::= SEQUENCE {
+    t11FcSpPoNaSummaryName            T11FcSpAlphaNumName,
+    t11FcSpPoNaSummaryPolicyType      T11FcSpPolicyObjectType,
+    t11FcSpPoNaSummaryPolicyIndex     Unsigned32,
+    t11FcSpPoNaSummaryPolicyNameType  T11FcSpPolicyNameType,
+    t11FcSpPoNaSummaryPolicyName      T11FcSpPolicyName,
+    t11FcSpPoNaSummaryHashStatus      T11FcSpHashCalculationStatus,
+    t11FcSpPoNaSummaryHashFormat      T11FcSpPolicyHashFormat,
+    t11FcSpPoNaSummaryHashValue       T11FcSpPolicyHashValue,
+    t11FcSpPoNaSummaryRowStatus       RowStatus
+}
+
+t11FcSpPoNaSummaryName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the non-active Policy Summary Object that
+           contains this Policy Object."
+    ::= { t11FcSpPoNaSummaryEntry 1 }
+
+t11FcSpPoNaSummaryPolicyType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyObjectType
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The 'Identifier' (i.e., the type) of this Policy Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3.1 and table 104."
+    ::= { t11FcSpPoNaSummaryEntry 2 }
+
+t11FcSpPoNaSummaryPolicyIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A unique integer value to distinguish this Policy Object
+           from any others that have the same type and that are
+           contained in the same Policy Summary Object."
+    ::= { t11FcSpPoNaSummaryEntry 3 }
+
+t11FcSpPoNaSummaryPolicyNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     alphaNumericName(7)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The combination of t11FcSpPoNaSummaryPolicyNameType and
+           t11FcSpPoNaSummaryPolicyName specify the name of the
+           non-active Policy Object identified by this row.
+
+           The type of name must be 'nodeName' if the value of the
+           corresponding instance of t11FcSpPoNaSummaryPolicyType is
+           'switchConnectivity', or 'alphaNumericName' otherwise."
+    ::= { t11FcSpPoNaSummaryEntry 4 }
+
+t11FcSpPoNaSummaryPolicyName OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyName
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The combination of t11FcSpPoNaSummaryPolicyNameType and
+           t11FcSpPoNaSummaryPolicyName specify the name of the
+           non-active Policy Object identified by this row."
+    ::= { t11FcSpPoNaSummaryEntry 5 }
+
+t11FcSpPoNaSummaryHashStatus OBJECT-TYPE
+    SYNTAX       T11FcSpHashCalculationStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "When read, the value of this object is either:
+
+             correct -- the corresponding instance of
+                        t11FcSpPoNaSummaryHashValue contains
+                        the correct value; or
+             stale   -- the corresponding instance of
+                        t11FcSpPoNaSummaryHashValue contains
+                        a stale (possibly incorrect) value;
+
+           Writing a value of 'calculate' is a request to re-calculate
+           and update the value of the corresponding instance of
+           t11FcSpPoNaSummaryHashValue.  Writing a value of 'correct'
+          or 'stale' to this object is an error (e.g., 'wrongValue')."
+    DEFVAL      { stale }
+    ::= { t11FcSpPoNaSummaryEntry 6 }
+
+t11FcSpPoNaSummaryHashFormat OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashFormat
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The format of this Policy Object's hash value as
+           contained in the corresponding instance of the
+           t11FcSpPoNaSummaryHashValue object."
+    DEFVAL      { '00000001'h }
+    ::= { t11FcSpPoNaSummaryEntry 7 }
+
+t11FcSpPoNaSummaryHashValue OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The hash value of this Policy Object, in the format
+           identified by the corresponding instance of the
+           t11FcSpPoNaSummaryHashFormat object."
+    DEFVAL      { "" }
+    ::= { t11FcSpPoNaSummaryEntry 8 }
+
+t11FcSpPoNaSummaryRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.
+
+           Before a row in this table can have 'active' status,
+           a non-Active Policy Object must already be represented
+           in the table corresponding to the value of
+           t11FcSpPoNaSummaryPolicyType with the name given by the
+           combination of t11FcSpPoNaSummaryPolicyNameType and
+           t11FcSpPoNaSummaryPolicyName.  If such a Policy Object gets
+           deleted from the relevant table, the row in this table must
+           also get deleted.
+
+           When a row has 'active' status, the only write-able MIB
+           objects in this table are t11FcSpPoNaSummaryHashStatus and
+           t11FcSpPoNaSummaryRowStatus."
+    ::= { t11FcSpPoNaSummaryEntry 9 }
+
+--
+-- Non-Active Switch Membership List Objects
+--
+
+t11FcSpPoNaSwListTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaSwListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of non-active Switch Membership List Objects."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 108."
+    ::= { t11FcSpPoNonActive 2 }
+
+t11FcSpPoNaSwListEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaSwListEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one non-active
+           Switch Membership List Object for the Fabric identified
+           by t11FcSpPoFabricIndex and managed within the Fibre
+
+           Channel management instance identified by
+           fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaSwListName }
+    ::= { t11FcSpPoNaSwListTable 1 }
+
+T11FcSpPoNaSwListEntry ::= SEQUENCE {
+    t11FcSpPoNaSwListName         T11FcSpAlphaNumName,
+    t11FcSpPoNaSwListFabricName   FcNameIdOrZero,
+    t11FcSpPoNaSwListRowStatus    RowStatus
+}
+
+t11FcSpPoNaSwListName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the Switch Membership List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 108."
+    ::= { t11FcSpPoNaSwListEntry 1 }
+
+t11FcSpPoNaSwListFabricName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The administratively specified Fabric_Name.  This value
+           is meaningful only when static Domain_IDs are used in a
+           Fabric.  If Static Domain_IDs are not used, the Fabric_Name
+           is dynamically determined, in which case the value of this
+           object can be '0000000000000000'h or the zero-length
+           string."
+    REFERENCE
+           "- t11FamConfigDomainId, T11-FC-FABRIC-ADDR-MGR-MIB,
+              Fibre Channel Fabric Address Manager MIB, RFC 4439;
+            - ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, table 108."
+    ::= { t11FcSpPoNaSwListEntry 2 }
+
+t11FcSpPoNaSwListRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time.
+
+           If a row in this table is deleted, any row in the
+           t11FcSpPoNaSwMembTable for the same Switch Membership
+           List Object will also get deleted."
+    ::= { t11FcSpPoNaSwListEntry 3 }
+
+--
+-- Switch Entries in Non-Active Switch Membership List Objects
+--
+
+t11FcSpPoNaSwMembTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaSwMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Switch Entries in non-active Switch Membership
+           List Objects."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoNonActive 3 }
+
+t11FcSpPoNaSwMembEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaSwMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Switch that
+           is listed in a Switch Entry of a non-active Switch Membership
+           List Object for the Fabric identified by t11FcSpPoFabricIndex
+           and managed within the Fibre Channel management instance
+           identified by fcmInstanceIndex.
+
+           A row cannot exist unless there is a row in
+           t11FcSpPoNaSwListTable for the given Switch Membership List
+           Object, i.e., the row in t11FcSpPoNaSwListTable for a
+           Switch Membership List Object must be created before (or
+           simultaneously with) a row in this table for a Switch
+           Entry in that Switch Membership List Object, and when a
+           row in t11FcSpPoNaSwListTable is deleted, all rows in this
+           table for Switch Entries in that Switch Membership List
+
+           Object also get deleted.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaSwListName,
+             t11FcSpPoNaSwMembSwitchNameType,
+             t11FcSpPoNaSwMembSwitchName }
+    ::= { t11FcSpPoNaSwMembTable 1 }
+
+T11FcSpPoNaSwMembEntry ::= SEQUENCE {
+    t11FcSpPoNaSwMembSwitchNameType   T11FcSpPolicyNameType,
+    t11FcSpPoNaSwMembSwitchName       FcNameIdOrZero,
+    t11FcSpPoNaSwMembFlags            BITS,
+    t11FcSpPoNaSwMembDomainID         FcDomainIdOrZero,
+    t11FcSpPoNaSwMembPolicyDataRole   INTEGER,
+    t11FcSpPoNaSwMembAuthBehaviour    BITS,
+    t11FcSpPoNaSwMembAttribute        T11FcSpAlphaNumNameOrAbsent,
+    t11FcSpPoNaSwMembRowStatus        RowStatus
+}
+
+t11FcSpPoNaSwMembSwitchNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     restrictedNodeName(2),
+                     wildcard(5),
+                     restrictedWildcard(6)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is 'nodeName' or
+           'restrictedNodeName', then the combination of
+           this object and t11FcSpPoNaSwMembSwitchName specify the
+           Switch Name of this Switch Entry.
+
+           The membership is restricted or unrestricted based on the
+           name type.  Restricted membership means that the Switch is
+           not allowed to be part of the Fabric unless allowed by a
+           specific Switch Connectivity Object.  Unrestricted
+           membership means that the Switch is allowed to be part of
+           the Fabric unless disallowed by a specific Switch
+           Connectivity Object.
+
+           The values of 'wildcard' and 'restrictedWildcard' provide
+           the means to specify whether to allow/deny membership for
+           Switches not explicitly named in the Switch Membership
+
+           List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoNaSwMembEntry 1 }
+
+t11FcSpPoNaSwMembSwitchName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of t11FcSpPoSwMembSwitchNameType is
+           'wildcard' or 'restrictedWildcard', this object has the
+           value '0000000000000000'h.
+
+           Otherwise, the combination of
+           t11FcSpPoNaSwMembSwitchNameType and this object specify the
+           Switch Name of this Switch Entry."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoNaSwMembEntry 2 }
+
+t11FcSpPoNaSwMembFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     staticDomainID(0),
+                     insistentDomainID(1),
+                     serialPortsAccess(2),
+                     physicalPortsAccess(3),
+                     managerRole(4)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "Configurable options in respect to the administration
+           of Policy Objects at this Switch:
+
+              'staticDomainID'     - the Switch uses the 'Static
+           Domain_IDs behavior' (as defined in FC-SW-4) when this bit
+           is set.  This bit should have the same setting for all
+           Switches in a Fabric's Switch Membership List Object, or
+           else the Fabric will partition.  If this bit is set,
+           the 'insistentDomainID' bit must not be set.
+
+              'insistentDomainID'  - if this bit is set, the Switch
+           uses the 'Insistent Domain_IDs behavior' (as defined in
+
+           FC-SW-4), and the 'staticDomainID' bit must not be set.
+
+              'serialPortsAccess'  - the Switch allows management
+           through serial ports when and only when this bit is set.
+
+              'physicalPortsAccess' - the Switch allows management
+           through the physical panel when and only when this bit
+           is set.
+
+              'managerRole'        - the Switch is allowed to change
+           the Fabric Policy configuration (on receipt of any of the
+           EACA, ESFC, EUFC, ACA, SFC, or UFC SW_ILSs) if this bit is
+           set."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 112."
+    ::= { t11FcSpPoNaSwMembEntry 3 }
+
+t11FcSpPoNaSwMembDomainID OBJECT-TYPE
+    SYNTAX       FcDomainIdOrZero
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The Domain_ID to be used when either the 'staticDomainID'
+           bit or the 'insistentDomainID' bit is set in the
+           corresponding value of t11FcSpPoNaSwMembFlags."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and tables 111 and 112."
+    ::= { t11FcSpPoNaSwMembEntry 4 }
+
+t11FcSpPoNaSwMembPolicyDataRole OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     client(1),
+                     autonomous(2),
+                     server(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The role of the Switch in terms of which Policy data
+           it retains/maintains:
+
+             'client' - the Switch operates as a Client Switch.
+           A Client Switch maintains its own Switch Connectivity
+           Object and all Fabric-wide List Objects.  If FC-SP
+
+           Zoning is used, a Client Switch maintains only the
+           subset of the Active Zone Set that it requires to
+           enforce the current Fabric Zoning configuration.
+
+             'autonomous' -  the Switch operates as an Autonomous
+           Switch.  An Autonomous Switch maintains its own Switch
+           Connectivity Object and all Fabric-wide List Objects.
+           This is the same as 'client' except that if FC-SP Zoning
+           is used, an Autonomous Switch maintains a complete copy
+           of the Fabric Zoning Database.
+
+             'server' - the Switch operates as a Server Switch.
+           A Server Switch maintains all Fabric-wide List Objects
+           and the Switch Connectivity Objects of each Switch in
+           the Fabric.  If FC-SP Zoning is used, a Server Switch
+           maintains a complete copy of the Fabric Zoning Database."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 113."
+    ::= { t11FcSpPoNaSwMembEntry 5 }
+
+t11FcSpPoNaSwMembAuthBehaviour  OBJECT-TYPE
+    SYNTAX       BITS {
+                      mustAuthenticate(0),
+                      rejectIsFailure(1)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The authentication behaviour of the Switch:
+
+             'mustAuthenticate' - if this bit is set, all connections
+           between this Switch and neighbor Switches must be
+           authenticated.
+
+             'rejectIsFailure' - if this bit is set, the rejection of
+           an AUTH_Negotiate message must be considered as an
+           authentication failure by this Switch."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 114."
+    ::= { t11FcSpPoNaSwMembEntry 6 }
+
+t11FcSpPoNaSwMembAttribute OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumNameOrAbsent
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of a non-active Attribute Policy Object that
+           is defined for this Switch.  The zero-length string
+           indicates that no non-active Attribute Policy Object is
+           defined for this Switch.
+
+           The effect of having no rows in the t11FcSpPoNaAttribTable
+           for which the value of t11FcSpPoNaAttribName is the
+           same as the value of this object, is the same as
+           this object's value being the zero-length string."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 110."
+    ::= { t11FcSpPoNaSwMembEntry 7 }
+
+t11FcSpPoNaSwMembRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time.
+
+           A row cannot exist unless there is a row in the
+           t11FcSpPoNaSwListTable for the Switch Membership List
+           Object containing the Switch Entry for this Switch, i.e.,
+           the row in t11FcSpPoNaSwListTable for a Switch Membership
+           List Object must be created before (or simultaneously)
+           with a row in this table for a Switch Entry in that
+           Switch Membership List Object; and when a row in
+           t11FcSpPoNaSwListTable is deleted, any row in this
+           table for a Switch Entry in that Switch Membership
+           List Object also gets deleted."
+    ::= { t11FcSpPoNaSwMembEntry 8 }
+
+--
+-- Node Entries in Non-Active Node Membership List Objects
+--
+
+t11FcSpPoNaNoMembTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaNoMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Node Entries in non-active Node Membership List
+           Objects.
+
+           One Node Membership List Object is represented by all
+           the rows in this table that have the same value of
+           t11FcSpPoNaNoMembListName."
+    ::= { t11FcSpPoNonActive 4 }
+
+t11FcSpPoNaNoMembEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaNoMembEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Node Entry of
+           a non-active Node Membership List Object for the Fabric
+           identified by t11FcSpPoFabricIndex and managed within
+           the Fibre Channel management instance identified by
+           fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaNoMembListName,
+             t11FcSpPoNaNoMembNodeNameType,
+             t11FcSpPoNaNoMembNodeName }
+    ::= { t11FcSpPoNaNoMembTable 1 }
+
+T11FcSpPoNaNoMembEntry ::= SEQUENCE {
+    t11FcSpPoNaNoMembListName       T11FcSpAlphaNumName,
+    t11FcSpPoNaNoMembNodeNameType   T11FcSpPolicyNameType,
+    t11FcSpPoNaNoMembNodeName       FcNameIdOrZero,
+    t11FcSpPoNaNoMembFlags          BITS,
+    t11FcSpPoNaNoMembCtAccessIndex  Unsigned32,
+    t11FcSpPoNaNoMembAttribute      T11FcSpAlphaNumNameOrAbsent,
+    t11FcSpPoNaNoMembRowStatus      RowStatus
+}
+
+t11FcSpPoNaNoMembListName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the non-active Node Membership List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNaNoMembEntry 1 }
+
+t11FcSpPoNaNoMembNodeNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     restrictedNodeName(2),
+                     portName(3),
+                     restrictedPortName(4),
+                     wildcard(5),
+                     restrictedWildcard(6)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is 'wildcard' or
+           'restrictedWildcard', this Node Entry applies to Nodes not
+           explicitly named in the Node Membership List Object.
+
+           Otherwise, the combination of this object and
+           t11FcSpPoNaNoMembNodeName specify the name of this Node Entry
+           in the active Node Membership List Object.  A Node is
+           identified by its Node Name or by one or more of its Port
+           Names.
+
+           Restricted membership means that a Node is not allowed to be
+           connected to the Fabric unless allowed by a specific Switch
+           Connectivity Object.  Unrestricted membership means that a
+           Node is allowed to be connected to the Fabric unless
+           disallowed by a specific Switch Connectivity Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNaNoMembEntry 2 }
+
+t11FcSpPoNaNoMembNodeName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "If the value of t11FcSpPoNaNoMembNodeNameType is
+           'wildcard' or 'restrictedWildcard', this object has the
+           value '0000000000000000'h.
+
+           Otherwise, the combination of t11FcSpPoNaNoMembNodeNameType
+           and this object specify the name of this Node Entry is the
+           active Node Membership List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNaNoMembEntry 3 }
+
+t11FcSpPoNaNoMembFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     scsiEnclosureAccess(0),
+                     authenticationRequired(1)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "Configurable options in respect to the administration
+           of Policy Objects at this Node:
+
+                'scsiEnclosureAccess'      - the Node is allowed to
+           control any Switch through SCSI Enclosure Services if this
+           bit is set.  If a Switch does not support SCSI Enclosure
+           Services, this bit is ignored.
+
+                'authenticationRequired'   - the Node is required to
+           authenticate itself to any Switch to which it is connected
+           if and only if this bit is set."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 118."
+    ::= { t11FcSpPoNaNoMembEntry 4 }
+
+t11FcSpPoNaNoMembCtAccessIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is zero, then access by this
+           Node to Generic Services is not limited by a Common
+           Transport Access Specifier.
+
+           Otherwise, the limits are specified by the set of Common
+           Transport Access Descriptors contained in those rows of
+           the t11FcSpPoNaCtDescrTable for which the value of
+           t11FcSpPoNaCtDescrSpecifierIndex is the same as the value
+           of this object.  No such rows in t11FcSpPoNaCtDescrTable
+           have the same effect as this object's value being zero."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.4.1 and tables 118/119/120/121."
+    ::= { t11FcSpPoNaNoMembEntry 5 }
+
+t11FcSpPoNaNoMembAttribute  OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumNameOrAbsent
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of a non-active Attribute Policy Object that
+           is defined for this Node.  The zero-length string indicates
+           that no non-active Attribute Policy Object is defined for
+           this Node.
+
+           The effect of having no rows in the t11FcSpPoNaAttribTable
+           for which the value of t11FcSpPoNaAttribName is the
+           same as the value of this object, is the same as
+           this object's value being the zero-length string."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.4.1 and table 116."
+    ::= { t11FcSpPoNaNoMembEntry 6 }
+
+t11FcSpPoNaNoMembRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaNoMembEntry 7 }
+
+--
+--
+-- Non-Active Common Transport Access Descriptors
+--
+
+t11FcSpPoNaCtDescrTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaCtDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Common Transport Access Descriptors referenced
+           by non-active Policy Objects.
+
+           A Common Transport Access Specifier is a list of Common
+           Transport Access Descriptors that specify whether a Node
+           is allowed to access a Generic Service or Sub-Server.
+
+           A non-active Common Transport Access Specifier is
+           represented by all rows of this table that have the same
+
+           values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
+           t11FcSpPoNaCtDescrSpecifierIndex."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.5"
+    ::= { t11FcSpPoNonActive 5 }
+
+t11FcSpPoNaCtDescrEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaCtDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Common Transport
+           Access Descriptor of an non-active Common Transport Access
+           Specifier used within the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaCtDescrSpecifierIndex, t11FcSpPoNaCtDescrIndex }
+    ::= { t11FcSpPoNaCtDescrTable 1 }
+
+T11FcSpPoNaCtDescrEntry ::= SEQUENCE {
+    t11FcSpPoNaCtDescrSpecifierIndex   Unsigned32,
+    t11FcSpPoNaCtDescrIndex            Unsigned32,
+    t11FcSpPoNaCtDescrFlags            BITS,
+    t11FcSpPoNaCtDescrGsType           OCTET STRING,
+    t11FcSpPoNaCtDescrGsSubType        OCTET STRING,
+    t11FcSpPoNaCtDescrRowStatus        RowStatus
+}
+
+t11FcSpPoNaCtDescrSpecifierIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Common Transport Access Specifier within a Fabric."
+    ::= { t11FcSpPoNaCtDescrEntry 1 }
+
+t11FcSpPoNaCtDescrIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Common Transport Access Descriptor within a Common Transport
+           Access Specifier."
+    ::= { t11FcSpPoNaCtDescrEntry 2 }
+
+t11FcSpPoNaCtDescrFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     allow(0),
+                     gsTypeWildcard(1),
+                     gsSubTypeWildcard(2),
+                     readOnly(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The flag bits that specify how access is to be limited by
+           this Common Transport Access Descriptor:
+
+            - allow -- access to the specified Generic Service and
+              Server is allowed if this bit is set, and is to be denied
+              if this bit is not set.
+
+            - gsTypeWildcard -- if this bit is set, the Generic Service
+              to be allowed/denied is specified by the value of
+              t11FcSpPoNaCtDescrGsType, and the gsSubTypeWildcard bit
+              must not also be set.
+
+            - gsSubTypeWildcard -- if this bit is set, the Generic
+              Service to be allowed/denied is specified by the value of
+              t11FcSpPoNaCtDescrGsSubType, and the gsTypeWildcard bit
+              must not also be set.
+
+            - readOnly -- if this bit is set, then access is to be
+              granted only for reading."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.5.1, and tables 117, 118, and 120."
+    ::= { t11FcSpPoNaCtDescrEntry 3 }
+
+t11FcSpPoNaCtDescrGsType OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The GS_Type of the Generic Service (e.g., the FC-GS-5
+           Management Service) that is subject to access control.
+
+           This value is ignored if the gsTypeWildcard bit is not set
+           in the corresponding value of t11FcSpPoNaCtDescrFlags."
+    REFERENCE
+           "- ANSI INCITS 427-2006,
+              Fibre Channel - Generic Services-5 (FC-GS-5),
+              section 4.3.2.4.
+            - ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.5.1 and table 120."
+    ::= { t11FcSpPoNaCtDescrEntry 4 }
+
+t11FcSpPoNaCtDescrGsSubType OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The GS_Subtype of the Generic Server (e.g., the Fabric Zone
+           Server) that is subject to access control.  This value is
+           ignored if the gsSubTypeWildcard bit is not set in the
+           corresponding value of t11FcSpPoNaCtDescrFlags."
+    REFERENCE
+           "- ANSI INCITS 427-2006,
+              Fibre Channel - Generic Services-5 (FC-GS-5),
+              section 4.3.2.5.
+            - ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.5.1 and table 120."
+    ::= { t11FcSpPoNaCtDescrEntry 5 }
+
+t11FcSpPoNaCtDescrRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaCtDescrEntry 6 }
+
+--
+-- Switches/Nodes in Non-Active Switch Connectivity Objects
+--
+
+t11FcSpPoNaSwConnTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaSwConnEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of non-active Switch Connectivity Objects.
+
+           A Switch Connectivity Object defines to which other
+           Switches or Nodes a particular Switch may/may not be
+           connected at the Node level and/or at the Port level."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6."
+    ::= { t11FcSpPoNonActive 6 }
+
+t11FcSpPoNaSwConnEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaSwConnEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains the name of a Switch/Node with which
+           any port of a particular Switch on a particular Fabric, or
+           a particular port on that Switch, is allowed or not allowed
+           to be connected.
+
+           The particular Fabric is identified by t11FcSpPoFabricIndex
+           and managed within the Fibre Channel management instance
+           identified by fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaSwConnSwitchName,
+             t11FcSpPoNaSwConnAllowedType,
+             t11FcSpPoNaSwConnPortNameOrAll,
+             t11FcSpPoNaSwConnAllowedIndex }
+    ::= { t11FcSpPoNaSwConnTable 1 }
+
+T11FcSpPoNaSwConnEntry ::= SEQUENCE {
+    t11FcSpPoNaSwConnSwitchName       FcNameIdOrZero,
+    t11FcSpPoNaSwConnAllowedType      INTEGER,
+    t11FcSpPoNaSwConnPortNameOrAll    FcNameIdOrZero,
+    t11FcSpPoNaSwConnAllowedIndex     Unsigned32,
+    t11FcSpPoNaSwConnAllowedNameType  T11FcSpPolicyNameType,
+    t11FcSpPoNaSwConnAllowedName      FcNameIdOrZero,
+    t11FcSpPoNaSwConnRowStatus        RowStatus
+}
+
+t11FcSpPoNaSwConnSwitchName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the Switch for which this Switch Connectivity
+           Object specifies topology restrictions."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1 and table 123."
+    ::= { t11FcSpPoNaSwConnEntry 1 }
+
+t11FcSpPoNaSwConnAllowedType OBJECT-TYPE
+    SYNTAX       INTEGER { switch(1), node(2) }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether this row refers to an
+           'Allowed Switch' that concerns Switch-to-Switch
+           connectivity or an 'Allowed Node' that concerns
+           Switch-to-Node connectivity.  Consequently, this object's
+           value indicates whether the corresponding instance of
+           t11FcSpPoNaSwConnAllowedName specifies the name of a Switch
+           or the name of a Node."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1 and table 123."
+    ::= { t11FcSpPoNaSwConnEntry 2 }
+
+t11FcSpPoNaSwConnPortNameOrAll OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE(0 | 8))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object specifies either the particular port on which
+           this topology restriction applies, or if the value is the
+           zero-length string, that the topology restriction applies
+           to all ports of the Switch.
+
+           In other words, if this object's value contains the name of
+           a port, then this row represents a 'Port Connectivity Entry'
+           (as described in FC-SP) within a Switch Connectivity Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1 and tables 123/124."
+    ::= { t11FcSpPoNaSwConnEntry 3 }
+
+t11FcSpPoNaSwConnAllowedIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When multiple rows in this table refer to different
+           'Allowed Switches' or to different 'Allowed Nodes' for the
+           same port(s) in the same Switch Connectivity Object, this
+           object provides a unique index value to distinguish between
+           such rows."
+    ::= { t11FcSpPoNaSwConnEntry 4 }
+
+t11FcSpPoNaSwConnAllowedNameType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyNameType {
+                     nodeName(1),
+                     restrictedNodeName(2),
+                     portName(3),
+                     restrictedPortName(4),
+                     wildcard(5),
+                     restrictedWildcard(6)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "If the value of this object is 'wildcard' or
+           'restrictedWildcard', this row specifies whether
+           connectivity is allowed/not allowed with entities not
+           explicitly named by other rows.
+
+           Otherwise, the combination of
+           t11FcSpPoNaSwConnAllowedNameType and
+           t11FcSpPoNaSwConnAllowedName specify the name of:
+
+           - a Switch (if t11FcSpPoNaSwConnAllowedType = 'switch'), or
+           - a Node (if t11FcSpPoNaSwConnAllowedType = 'node')
+
+           to which connectivity is allowed/not allowed."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1 and tables 123/124."
+    ::= { t11FcSpPoNaSwConnEntry 5 }
+
+t11FcSpPoNaSwConnAllowedName OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero (SIZE (8))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "If t11FcSpPoNaSwConnAllowedNameType has the value
+           'wildcard' or 'restrictedWildcard', this object has the
+           value '0000000000000000'h.
+
+           Otherwise, the combination of
+           t11FcSpPoNaSwConnAllowedNameType and
+           t11FcSpPoNaSwConnAllowedName specify the name of:
+
+           - a Switch (if t11FcSpPoNaSwConnAllowedType = 'switch'), or
+           - a Node (if t11FcSpPoNaSwConnAllowedType = 'node')
+
+           to which connectivity is allowed/not allowed."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.6.1 and tables 123/124."
+    ::= { t11FcSpPoNaSwConnEntry 6 }
+
+t11FcSpPoNaSwConnRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaSwConnEntry 7 }
+
+--
+-- IP Management Entries in Non-Active IP Management List Objects
+--
+
+t11FcSpPoNaIpMgmtTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaIpMgmtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of IP Management Entries in non-active IP
+           Management List Objects.  The IP Management List Object is a
+           Fabric-wide Policy Object that describes which IP hosts are
+           allowed to manage a Fabric.
+
+           One non-active IP Management List Object is represented by
+           all rows of this table that have the same values of
+           fcmInstanceIndex and t11FcSpPoFabricIndex."
+    ::= { t11FcSpPoNonActive 7 }
+
+t11FcSpPoNaIpMgmtEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaIpMgmtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one IP Management
+
+           entry within a non-active IP Management List Object for the
+           Fabric identified by t11FcSpPoFabricIndex and managed
+           within the Fibre Channel management instance identified
+           by fcmInstanceIndex.
+
+           The Policy Object Name of an IP Management Entry Policy
+           Object is either an IPv6 Address Range or an IPv4 Address
+           Range.  In a Fabric's database of Policy Objects, every
+           Policy Object Name, including these Internet address ranges,
+           is represented as a (T11FcSpPolicyNameType,
+           T11FcSpPolicyName) tuple.  In contrast, this MIB module
+           uses the conventional MIB syntax for IP addresses, and
+           therefore represents the Policy Object Name of an IP
+           Management Entry Policy Object as a (InetAddressType,
+           InetAddress, InetAddress) tuple.
+
+           In theory, the use of t11FcSpPoNaIpMgmtEntryNameLow and
+           t11FcSpPoNaIpMgmtEntryNameHigh, which have the syntax of
+           InetAddress, in the INDEX could cause the need for
+           excessively long OIDs.  In practice, this can't happen
+           because FC-SP doesn't allow these objects to be specified
+           as DNS names.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaIpMgmtListName,
+             t11FcSpPoNaIpMgmtEntryNameType,
+             t11FcSpPoNaIpMgmtEntryNameLow,
+             t11FcSpPoNaIpMgmtEntryNameHigh }
+    ::= { t11FcSpPoNaIpMgmtTable 1 }
+
+T11FcSpPoNaIpMgmtEntry ::= SEQUENCE {
+    t11FcSpPoNaIpMgmtListName        T11FcSpAlphaNumName,
+    t11FcSpPoNaIpMgmtEntryNameType   InetAddressType,
+    t11FcSpPoNaIpMgmtEntryNameLow    InetAddress,
+    t11FcSpPoNaIpMgmtEntryNameHigh   InetAddress,
+    t11FcSpPoNaIpMgmtWkpIndex        Unsigned32,
+    t11FcSpPoNaIpMgmtAttribute       T11FcSpAlphaNumNameOrAbsent,
+    t11FcSpPoNaIpMgmtRowStatus       RowStatus
+}
+
+t11FcSpPoNaIpMgmtListName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of a non-active Node Membership List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 125."
+    ::= { t11FcSpPoNaIpMgmtEntry 1 }
+
+t11FcSpPoNaIpMgmtEntryNameType OBJECT-TYPE
+    SYNTAX       InetAddressType { ipv4(1), ipv6(2) }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The combination of t11FcSpPoNaIpMgmtEntryNameType,
+           t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh
+           specify the Internet address range of this IP Management
+           Entry in the IP Management List Object.
+
+           The FC-SP specification does not allow this address to
+           be specified using a DNS domain name, nor does it allow
+           the specification of zone indexes.  Therefore, the
+           type of address must be one of: 'ipv4' or 'ipv6'."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 7.1.7.1 and table 126."
+    ::= { t11FcSpPoNaIpMgmtEntry 2 }
+
+t11FcSpPoNaIpMgmtEntryNameLow OBJECT-TYPE
+    SYNTAX       InetAddress (SIZE(4 | 16))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The lower end of an Internet address range.  The type
+           of this address is given by the corresponding instance
+           of t11FcSpPoNaIpMgmtEntryNameType.
+
+           The combination of t11FcSpPoNaIpMgmtEntryNameType,
+           t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
+           specify the Internet address range of this IP Management
+           Entry in the IP Management List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 7.1.7.1 and table 126."
+    ::= { t11FcSpPoNaIpMgmtEntry 3 }
+
+t11FcSpPoNaIpMgmtEntryNameHigh OBJECT-TYPE
+    SYNTAX       InetAddress (SIZE(4 | 16))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The higher end of an Internet address range.  The type
+           of this address is given by the corresponding instance
+           of t11FcSpPoNaIpMgmtEntryNameType.
+
+           The combination of t11FcSpPoNaIpMgmtEntryNameType,
+           t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh
+           specify the Internet address range of this IP Management
+           Entry in the IP Management List Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 7.1.7.1 and table 126."
+    ::= { t11FcSpPoNaIpMgmtEntry 4 }
+
+t11FcSpPoNaIpMgmtWkpIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "This object identifies the restrictions for IP management
+           access by IP hosts in this range of IP addresses.
+
+           The restrictions are specified as the set of Well-Known
+           Protocols Access Descriptors contained in those rows of the
+           t11FcSpPoNaWkpDescrTable for which the value of
+           t11FcSpPoNaWkpDescrSpecifierIndx is the same as the value
+           of this object.  If there are no such rows or if the value
+           of this object is zero, then this IP Management Entry does
+           not identify any Well-Known Protocols Access restrictions."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and tables 127/129."
+    ::= { t11FcSpPoNaIpMgmtEntry 5 }
+
+t11FcSpPoNaIpMgmtAttribute OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumNameOrAbsent
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of a non-active Attribute Policy Object that
+           is defined for this IP Management entry.  The zero-length
+           string indicates that no non-active Attribute Policy Object
+           is defined for it.
+
+           The effect of having no rows in the t11FcSpPoNaAttribTable
+           for which the value of t11FcSpPoNaAttribName is the same
+           as the value of this object, is the same as this object's
+           value being the zero-length string."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 128."
+    ::= { t11FcSpPoNaIpMgmtEntry 6 }
+
+t11FcSpPoNaIpMgmtRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaIpMgmtEntry 7 }
+
+--
+-- Non-Active Well-Known Protocol Access Descriptors
+--
+
+t11FcSpPoNaWkpDescrTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaWkpDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of the Well-Known Protocol Access Descriptors
+           referenced from non-active Policy Objects.
+
+           A Well-Known Protocol Access Specifier is a list of
+           Well-Known Protocol Access Descriptors each of which
+           specifies a protocol number, a port number, and/or various
+           flags specifying how IP management access is restricted.
+
+           A non-active Well-Known Protocol Transport Access Specifier
+           is represented by all rows of this table that have the same
+           values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
+           t11FcSpPoNaWkpDescrSpecifierIndx."
+    ::= { t11FcSpPoNonActive 8 }
+
+t11FcSpPoNaWkpDescrEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaWkpDescrEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Well-Known
+
+           Protocol Access Descriptor of a non-active Well-Known
+           Protocol Access Specifier used within the Fabric identified
+           by t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaWkpDescrSpecifierIndx,
+             t11FcSpPoNaWkpDescrIndex }
+    ::= { t11FcSpPoNaWkpDescrTable 1 }
+
+T11FcSpPoNaWkpDescrEntry ::= SEQUENCE {
+    t11FcSpPoNaWkpDescrSpecifierIndx    Unsigned32,
+    t11FcSpPoNaWkpDescrIndex            Unsigned32,
+    t11FcSpPoNaWkpDescrFlags            BITS,
+    t11FcSpPoNaWkpDescrWkpNumber        Unsigned32,
+    t11FcSpPoNaWkpDescrDestPort         InetPortNumber,
+    t11FcSpPoNaWkpDescrRowStatus        RowStatus
+}
+
+t11FcSpPoNaWkpDescrSpecifierIndx OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           non-active Well-Known Protocol Access Specifier within
+           a Fabric."
+    ::= { t11FcSpPoNaWkpDescrEntry 1 }
+
+t11FcSpPoNaWkpDescrIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Well-Known Protocol Access Descriptor within a
+           non-active Well-Known Protocol Access Specifier."
+    ::= { t11FcSpPoNaWkpDescrEntry 2 }
+
+t11FcSpPoNaWkpDescrFlags OBJECT-TYPE
+    SYNTAX       BITS {
+                     allow(0),
+                     wkpWildcard(1),
+                     destPortWildcard(2),
+                     readOnly(3)
+
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The flag bits that specify how access is to be limited by
+           this Well-Known Protocol Access Descriptor:
+
+            - allow -- IP management access using this protocol/port
+              is allowed if this bit is set, and to be denied if this
+              bit is not set.
+
+            - wkpWildcard -- if this bit is set, the IP Protocol number
+              of the Well-Known Protocol to be allowed/denied is
+              specified by the value of t11FcSpPoNaWkpDescrWkpNumber.
+
+            - destPortWildcard -- if this bit is set, the Destination
+              (TCP/UDP) Port number of the Well-Known Protocol to be
+              allowed/denied is specified by the value of
+              t11FcSpPoNaWkpDescrDestPort.
+
+            - readOnly -- if this bit is set, then access is to be
+              granted only for reading."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 131."
+    ::= { t11FcSpPoNaWkpDescrEntry 3 }
+
+t11FcSpPoNaWkpDescrWkpNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..255)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "When the 'wkpWildcard' bit is set in the corresponding
+           instance of t11FcSpPoNaWkpDescrFlags, this object specifies
+           the IP protocol number of the Well-Known Protocol."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 131.
+            - http://www.iana.org/assignments/protocol-numbers."
+    ::= { t11FcSpPoNaWkpDescrEntry 4 }
+
+t11FcSpPoNaWkpDescrDestPort OBJECT-TYPE
+    SYNTAX       InetPortNumber
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "When the 'destPortWildcard' bit is set in the corresponding
+           instance of t11FcSpPoNaWkpDescrFlags, this object specifies
+           the Destination (TCP/UDP) Port number of the Well-Known
+           Protocol.  When the 'destPortWildcard' bit is reset, this
+           object is ignored (and can have the value zero)."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.7.1 and table 131.
+            - http://www.iana.org/assignments/port-numbers."
+    ::= { t11FcSpPoNaWkpDescrEntry 5 }
+
+t11FcSpPoNaWkpDescrRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaWkpDescrEntry 6 }
+
+--
+-- Attribute Entries in Non-Active Attribute Policy Objects
+--
+
+t11FcSpPoNaAttribTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of the Attribute Policy Objects being used within
+           non-active Policy Objects.
+
+           A non-active Attribute Policy Object is represented by all
+           the Attribute Entries in this table that have the same
+           value of t11FcSpPoNaAttribName."
+    ::= { t11FcSpPoNonActive 9 }
+
+t11FcSpPoNaAttribEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Attribute
+           Entry contained within an Attribute Policy Object
+           that is non-active within the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           For some types of Attribute Policy Objects, it is valuable
+           to break out some semantically significant parts of the
+           Policy Object's value into their own individual MIB
+           objects; for example, to extract the one or more individual
+           Authentication Protocol Identifiers and associated
+
+           Authentication Protocol Parameters out of an Attribute
+           containing a 'AUTH_Negotiate Message Payload'.  For such
+           types, another MIB table is defined to hold the extracted
+           values in MIB objects specific to the Attribute Policy
+           Object's type.  In such cases, the
+           t11FcSpPoNaAttribExtension object in this table points to
+           the other MIB table.
+
+           If the value of one Attribute Entry is too large (more than
+           256 bytes) to be contained within the value of one instance
+           of t11FcSpPoNaAttribValue, then one row in this table
+           contains the first 256 bytes, and one (or more) other row(s)
+           in this table contain the rest of the value.
+
+           The StorageType of a row in this table is specified by the
+           instance of t11FcSpPoStorageType that is INDEX-ed by the
+           same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaAttribName, t11FcSpPoNaAttribEntryIndex,
+             t11FcSpPoNaAttribPartIndex }
+    ::= { t11FcSpPoNaAttribTable 1 }
+
+T11FcSpPoNaAttribEntry ::= SEQUENCE {
+    t11FcSpPoNaAttribName         T11FcSpAlphaNumName,
+    t11FcSpPoNaAttribEntryIndex   Unsigned32,
+    t11FcSpPoNaAttribPartIndex    Unsigned32,
+    t11FcSpPoNaAttribType         Unsigned32,
+    t11FcSpPoNaAttribValue        OCTET STRING,
+    t11FcSpPoNaAttribExtension    OBJECT IDENTIFIER,
+    t11FcSpPoNaAttribRowStatus    RowStatus
+}
+
+t11FcSpPoNaAttribName OBJECT-TYPE
+    SYNTAX       T11FcSpAlphaNumName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The name of the Attribute Policy Object containing one
+           or more Attribute Entries."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.8.1 and table 133."
+    ::= { t11FcSpPoNaAttribEntry 1 }
+
+t11FcSpPoNaAttribEntryIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A unique value to distinguish this Attribute Entry
+           from other Attribute Entries contained in the same
+           Attribute Policy Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.8.1, tables 133/134."
+    ::= { t11FcSpPoNaAttribEntry 2 }
+
+t11FcSpPoNaAttribPartIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When the value of an Attribute Entry is shorter than 257
+           bytes, the whole value is contained in one instance of
+           t11FcSpPoNaAttribValue, and the value of this object is 1.
+
+           If the value of an Attribute Entry is longer than 256 bytes,
+           then that value is divided up on 256-byte boundaries such
+           that all parts are 256 bytes long except the last part which
+           is shorter if necessary, with each such part contained in
+           a separate row of this table, and the value of this object
+           is set to the part number.  That is, this object has the
+           value of 1 for bytes 0-255, the value of 2 for bytes
+           256-511, etc."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.8.1, tables 134/135."
+    ::= { t11FcSpPoNaAttribEntry 3 }
+
+t11FcSpPoNaAttribType OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The type of attribute.  The first type to be defined is:
+
+           t11FcSpPoNaAttribType    t11FcSpPoNaAttribValue
+
+           =====================    ======================
+             '00000001'h          The AUTH_Negotiate Message Payload
+           "
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.8.1, tables 134/135 and table 10."
+    ::= { t11FcSpPoNaAttribEntry 4 }
+
+t11FcSpPoNaAttribValue OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..256))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The value of an Attribute Entry is divided up on 256-byte
+           boundaries such that all parts are 256 bytes long except the
+           last part, which is shorter if necessary, and each such part
+           is contained in a separate instance of this object.
+
+           When the value of the corresponding instance of
+           t11FcSpPoNaAttribExtension is not zeroDotZero, then the same
+           underlying management data has its value contained both in
+           this object and in the individual/broken-out parts pointed
+           to by t11FcSpPoNaAttribExtension.  Thus, after any
+           modification of the underlying management data, e.g., after
+           a Set operation to the value of either MIB representation,
+           then that modification is reflected in the values of both
+           MIB representations."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              section 7.1.8.1, tables 134/135 and table 10."
+    ::= { t11FcSpPoNaAttribEntry 5 }
+
+t11FcSpPoNaAttribExtension OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "For some types of Attribute Policy Object, the value of
+           this MIB object points to type-specific MIB objects that
+           contain individual/broken-out parts of the Attribute Policy
+           Object's value.  If this object doesn't point to such
+           type-specific MIB objects, then it contains the value:
+           zeroDotZero.
+
+           In particular, when the value of t11FcSpPoNaAttribType
+           indicates 'AUTH_Negotiate Message Payload', one or more
+
+           Authentication Protocol Identifiers and their associated
+           Authentication Protocol Parameters are embedded within
+           the value of the corresponding instance of
+           t11FcSpPoNaAttribValue; MIB objects to contain these
+           individual values are defined in the
+           t11FcSpPoAuthProtTable.  Thus, for an 'AUTH_Negotiate
+           Message Payload' Attribute, the value of this object would
+           contain the OID of t11FcSpPoNaAuthProtTable.
+
+           When the value of this object is not zeroDotZero, then the
+           same underlying management data has its value contained in
+           both the individual/broken-out parts pointed to by this
+           object and in the corresponding instance of
+           t11FcSpPoNaAttribValue.  Thus, after any modification of the
+           underlying management data, e.g., after a Set operation to
+           the value of either MIB representation, then that
+           modification is reflected in the values of both MIB
+           representations."
+    ::= { t11FcSpPoNaAttribEntry 6 }
+
+t11FcSpPoNaAttribRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaAttribEntry 7 }
+
+--
+-- Auth. Protocol Parameters in Non-Active Attribute Policy Objects
+--
+
+t11FcSpPoNaAuthProtTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoNaAuthProtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of Authentication Protocol Identifier and
+           Authentication Protocol Parameters that are embedded in
+           Attribute Policy Objects being used within non-active
+           Policy Objects.
+
+           This table is used for Attribute Entries of Attribute Policy
+           Objects for which the value of t11FcSpPoNaAttribType
+           indicates 'AUTH_Negotiate Message Payload' and the value of
+           t11FcSpPoNaAttribExtension contains the OID of this table."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 5.3.2 & 7.1.8.1,
+              tables 134/135 and tables 10/11."
+    ::= { t11FcSpPoNonActive 10 }
+
+t11FcSpPoNaAuthProtEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoNaAuthProtEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each row contains information about an Authentication
+           Protocol that is extracted out of the Attribute Entry
+           (identified by t11FcSpPoNaAttribEntryIndex) of the
+           non-active Policy Attribute Object (identified by
+           t11FcSpPoNaAttribName) for the Fabric identified by
+           t11FcSpPoFabricIndex and managed within the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           If the value of one Attribute Protocol Parameters string is
+           too large (more than 256 bytes) to be contained within the
+           value of one instance of t11FcSpPoNaAuthProtParams, then
+           one row in this table contains the first 256 bytes, and
+           one (or more) other row(s) in this table contain the rest
+           of the value.
+
+           The same underlying management data that is represented in
+           rows of this table is also represented by the corresponding
+           instances of t11FcSpPoNaAttribValue.  Thus, after any
+           modification of the underlying management data, e.g., after
+           a Set operation to the value of either MIB representation,
+           then that modification is reflected in the values of both
+           MIB representations."
+    INDEX  { fcmInstanceIndex, t11FcSpPoFabricIndex,
+             t11FcSpPoNaAttribName, t11FcSpPoNaAttribEntryIndex,
+             t11FcSpPoNaAuthProtIdentifier,
+             t11FcSpPoNaAuthProtPartIndex }
+    ::= { t11FcSpPoNaAuthProtTable 1 }
+
+T11FcSpPoNaAuthProtEntry ::= SEQUENCE {
+    t11FcSpPoNaAuthProtIdentifier   Unsigned32,
+    t11FcSpPoNaAuthProtPartIndex    Unsigned32,
+    t11FcSpPoNaAuthProtParams       OCTET STRING,
+    t11FcSpPoNaAuthProtRowStatus    RowStatus
+}
+
+t11FcSpPoNaAuthProtIdentifier OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The Authentication Protocol Identifier:
+
+                    1      = DH-CHAP
+                    3      = FCPAP
+                    4      = IKEv2
+                    5      = IKEv2-AUTH
+              240 thru 255 = Vendor Specific Protocols
+
+            all other values are 'Reserved' (by T11)."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.2, table 11."
+    ::= { t11FcSpPoNaAuthProtEntry 1 }
+
+t11FcSpPoNaAuthProtPartIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "When the value of an Attribute Protocol Parameters string
+           is shorter than 257 bytes, the whole value is contained in
+           one instance of t11FcSpPoNaAuthProtParams, and the value of
+           this object is 1. (This includes the case when the Attribute
+           Protocol Parameters string is zero bytes in length.)
+
+           If the value of an Authentication Protocol Parameters string
+           is longer than 256 bytes, then that value is divided up on
+           256-byte boundaries such that all parts are 256 bytes long
+           except the last part, which is shorter if necessary, with
+           each such part contained in a separate row of this table,
+           and the value of this object is set to the part number.
+           That is, this object has the value of 1 for bytes 0-255,
+           the value of 2 for bytes 256-511, etc."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.2, table 10."
+    ::= { t11FcSpPoNaAuthProtEntry 2 }
+
+t11FcSpPoNaAuthProtParams OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..256))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The value of an Authentication Protocol Parameters string
+           is divided up on 256-byte boundaries such that all parts
+           are 256 bytes long except the last part, which is shorter
+           if necessary, and each such part is contained in a
+           separate instance of this object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 5.3.2, table 10."
+    ::= { t11FcSpPoNaAuthProtEntry 3 }
+
+t11FcSpPoNaAuthProtRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpPoNaAuthProtEntry 4 }
+
+--
+-- Part 4 - Statistics
+--
+
+t11FcSpPoStatsTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of statistics maintained by FC-SP Security
+           Policy Servers."
+    ::= { t11FcSpPoStatistics 1 }
+
+t11FcSpPoStatsEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A set of statistics for the FC-SP Security Policy Server on
+           the Fabric identified by the value of t11FcSpPoFabricIndex,
+           and managed within the Fibre Channel management instance
+           identified by fcmInstanceIndex."
+    INDEX   { fcmInstanceIndex, t11FcSpPoFabricIndex }
+    ::= { t11FcSpPoStatsTable 1 }
+
+T11FcSpPoStatsEntry ::= SEQUENCE {
+    t11FcSpPoInRequests     Counter32,
+    t11FcSpPoInAccepts      Counter32,
+    t11FcSpPoInRejects      Counter32
+}
+
+t11FcSpPoInRequests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of FC-SP Policy Management Requests
+           (e.g., GPS, APS, etc.) received by this FC-SP
+           Security Policy Server on this Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3."
+    ::= { t11FcSpPoStatsEntry 1 }
+
+t11FcSpPoInAccepts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that this FC-SP Security Policy Server
+           sent an Accept CT_IU on this Fabric in response to a
+           received FC-SP Policy Management Request (e.g., GPS, APS,
+           etc.).
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3."
+    ::= { t11FcSpPoStatsEntry 2 }
+
+t11FcSpPoInRejects OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that this FC-SP Security Policy Server
+           sent a Reject CT_IU on this Fabric in response to a
+           received FC-SP Policy Management Request (e.g., GPS, APS,
+           etc.).
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3."
+    ::= { t11FcSpPoStatsEntry 3 }
+
+--
+-- Part 5 - Control Information & Notifications
+--
+
+--
+-- Control Information
+--
+
+t11FcSpPoServerAddress OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero
+    MAX-ACCESS   accessible-for-notify
+    STATUS       current
+    DESCRIPTION
+           "The WWN of the FC-SP Security Policy Server that
+           received a request that is referenced in a
+           notification."
+    ::= { t11FcSpPoControl 1 }
+
+t11FcSpPoControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpPoControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of control information, including the memory
+           realization of FC-SP Policy Databases, and concerning
+           the generation of notifications due to FC-SP
+           Policy-related events."
+    ::= { t11FcSpPoControl 2 }
+
+t11FcSpPoControlEntry OBJECT-TYPE
+    SYNTAX       T11FcSpPoControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains control information specific to FC-SP
+           Policy and Policy-related events for the Fabric identified
+           by the value of t11FcSpPoFabricIndex, and managed within
+           the Fibre Channel management instance identified by
+           fcmInstanceIndex."
+    INDEX   { fcmInstanceIndex, t11FcSpPoFabricIndex }
+    ::= { t11FcSpPoControlTable 1 }
+
+T11FcSpPoControlEntry ::= SEQUENCE {
+     t11FcSpPoStorageType              StorageType,
+     t11FcSpPoNotificationEnable       TruthValue,
+     t11FcSpPoLastNotifyType           INTEGER,
+     t11FcSpPoRequestSource            FcNameIdOrZero,
+     t11FcSpPoReasonCode               T11NsGs4RejectReasonCode,
+     t11FcSpPoCtCommandString          OCTET STRING,
+     t11FcSpPoReasonCodeExp            Unsigned32,
+     t11FcSpPoReasonVendorCode         OCTET STRING
+}
+
+t11FcSpPoStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization of FC-SP
+           Policy Objects and related information for a particular
+           Fabric; specifically, for:
+
+             - rows created and/or modified for the particular
+               Fabric in these tables:
+
+                   t11FcSpPoNaSummaryTable
+                   t11FcSpPoNaSwListTable
+                   t11FcSpPoNaSwMembTable
+                   t11FcSpPoNaNoMembTable
+                   t11FcSpPoNaCtDescrTable
+                   t11FcSpPoNaSwConnTable
+                   t11FcSpPoNaIpMgmtTable
+                   t11FcSpPoNaWkpDescrTable
+                   t11FcSpPoNaAttribTable
+
+             - the activate and deactivate actions invoked through
+               the t11FcSpPoOperActivate and t11FcSpPoOperDeActivate
+               objects for the particular Fabric; and
+
+             - modified information contained in the same row
+               as an instance of this object.
+
+           Even if an instance of this object has the value
+           'permanent(4)', none of the information defined in
+           this MIB module for the given Fabric needs to be
+           writable."
+    ::= { t11FcSpPoControlEntry 1 }
+
+t11FcSpPoNotificationEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether the following types of
+           notifications:
+
+              t11FcSpPoNotifyActivation,
+              t11FcSpPoNotifyActivateFail,
+              t11FcSpPoNotifyDeactivation and
+              t11FcSpPoNotifyDeactivateFail
+
+           should be generated for this Fabric."
+    ::= { t11FcSpPoControlEntry 2 }
+
+t11FcSpPoLastNotifyType OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     none(1),
+                     activation(2),
+                     activateFail(3),
+                     deactivation(4),
+                     deactivateFail(5)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "An indication of which of the following types of
+           notification is currently being/was most recently
+           generated for the Fabric:
+
+             'activation'     -- t11FcSpPoNotifyActivation
+             'activateFail'   -- t11FcSpPoNotifyActivateFail
+             'deactivation'   -- t11FcSpPoNotifyDeactivation
+             'deactivateFail' -- t11FcSpPoNotifyDeactivateFail
+
+           The value 'none' indicates that none of these types of
+           notifications have been generated since the last restart
+           of the network management system, and therefore that the
+           corresponding instances of: t11FcSpPoRequestSource,
+           t11FcSpPoReasonCode, t11FcSpPoCtCommandString,
+           t11FcSpPoReasonCodeExp, and
+           t11FcSpPoReasonVendorCode are irrelevant."
+    ::= { t11FcSpPoControlEntry 3 }
+
+t11FcSpPoRequestSource OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The WWN of the source of the (Activate Policy Summary
+           or Deactivate Policy Summary) request for which the
+           current/most recent notification of the type indicated by
+           the corresponding instance of t11FcSpPoLastNotifyType
+           is being/was generated.
+
+           If no source is available, the value of this object is
+           the zero-length string."
+    DEFVAL { "" }
+    ::= { t11FcSpPoControlEntry 4 }
+
+t11FcSpPoReasonCode OBJECT-TYPE
+    SYNTAX       T11NsGs4RejectReasonCode
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The reason code associated with the failure that is
+           indicated when the value of the corresponding instance
+           of t11FcSpPoLastNotifyType is 'activateFail' or
+           'deactivateFail'.
+
+           For other values of t11FcSpPoLastNotifyType, the value
+           of this object is 'none(1)'."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.2 & 7.3.6.3"
+    ::= { t11FcSpPoControlEntry 5 }
+
+t11FcSpPoCtCommandString OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The binary content of the failed request that is
+           indicated when the value of the corresponding instance of
+           t11FcSpPoLastNotifyType is 'activateFail' or
+           'deactivateFail'.  The content of the request is formatted
+           as an octet string (in network byte order) containing the
+           CT_IU, as described in Table 2 of [FC-GS-5] (including the
+           preamble).
+
+           For other values of t11FcSpPoLastNotifyType, or if the
+           CT_IU's content is unavailable, the value of this object
+           is the zero-length string.
+
+           When the length of this object is 255 octets, it
+           contains the first 255 octets of the CT_IU (in
+           network-byte order)."
+    ::= { t11FcSpPoControlEntry 6 }
+
+t11FcSpPoReasonCodeExp OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..255)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The reason code explanation associated with the failure
+           that is indicated when the value of the corresponding
+           instance of t11FcSpPoLastNotifyType is 'activateFail' or
+           'deactivateFail'.
+
+           For other values of t11FcSpPoLastNotifyType, the value
+           of this object is zero."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.2 & 7.3.6.3"
+    ::= { t11FcSpPoControlEntry 7 }
+
+t11FcSpPoReasonVendorCode  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0 | 1))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The vendor-specific reason code associated with the failure
+           that is indicated when the value of the corresponding
+           instance of t11FcSpPoLastNotifyType is 'activateFail' or
+           'deactivateFail'.
+
+           For other values of t11FcSpPoLastNotifyType, or if no
+           vendor-specific reason code is available, the value
+           of this object is the zero-length string."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.2 & 7.3.6.3"
+    ::= { t11FcSpPoControlEntry 8 }
+
+--
+-- Notification definitions
+--
+
+t11FcSpPoNotifyActivation NOTIFICATION-TYPE
+    OBJECTS      { t11FcSpPoServerAddress,
+                   t11FcSpPoPolicySummaryObjName,
+                   t11FcSpPoRequestSource }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated whenever a Security
+           Policy Server (indicated by the value of
+           t11FcSpPoServerAddress) successfully completes the
+           execution of an Activate Policy Summary request.
+           The value of t11FcSpPoRequestSource indicates
+           the source of the APS request.  The value of
+           t11FcSpPoPolicySummaryObjName indicates the name of
+           the activated Policy Summary Object."
+    ::= { t11FcSpPoMIBNotifications 1 }
+
+t11FcSpPoNotifyActivateFail NOTIFICATION-TYPE
+    OBJECTS      { t11FcSpPoServerAddress,
+                   t11FcSpPoRequestSource,
+                   t11FcSpPoCtCommandString,
+                   t11FcSpPoReasonCode,
+                   t11FcSpPoReasonCodeExp,
+                   t11FcSpPoReasonVendorCode }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated whenever a Security Policy
+           Server (indicated by the value of t11FcSpPoServerAddress)
+           fails to complete the execution of an Activate Policy
+           Summary request.
+
+           The value of t11FcSpPoCtCommandString indicates the
+           rejected request, and the values of t11FcSpPoReasonCode,
+           t11FcSpPoReasonCodeExp, and t11FcSpPoReasonVendorCode
+           indicate the reason for the rejection.  The value of
+           t11FcSpPoRequestSource indicates the source of the
+           request."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.2."
+    ::= { t11FcSpPoMIBNotifications 2 }
+
+t11FcSpPoNotifyDeactivation NOTIFICATION-TYPE
+    OBJECTS      { t11FcSpPoServerAddress,
+                   t11FcSpPoRequestSource }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated whenever a Security
+           Policy Server (indicated by the value of
+           t11FcSpPoServerAddress) successfully completes the
+
+           execution of a Deactivate Policy Summary request.
+           The value of t11FcSpPoRequestSource indicates
+           the source of the DPS request."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.3.6.3."
+    ::= { t11FcSpPoMIBNotifications 3 }
+
+t11FcSpPoNotifyDeactivateFail NOTIFICATION-TYPE
+    OBJECTS      { t11FcSpPoServerAddress,
+                   t11FcSpPoRequestSource,
+                   t11FcSpPoCtCommandString,
+                   t11FcSpPoReasonCode,
+                   t11FcSpPoReasonCodeExp,
+                   t11FcSpPoReasonVendorCode }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated whenever a Security Policy
+           Server (indicated by the value of t11FcSpPoServerAddress)
+           fails to complete the execution of a Deactivate Policy
+           Summary request.
+
+           The value of t11FcSpPoCtCommandString indicates the
+           rejected request, and the values of t11FcSpPoReasonCode,
+           t11FcSpPoReasonCodeExp, and t11FcSpPoReasonVendorCode
+           indicate the reason for the rejection.  The value of
+           t11FcSpPoRequestSource indicates the source of the
+           request."
+    ::= { t11FcSpPoMIBNotifications 4 }
+
+--
+-- Conformance
+--
+
+t11FcSpPoMIBCompliances
+                    OBJECT IDENTIFIER ::= { t11FcSpPoMIBConformance 1 }
+t11FcSpPoMIBGroups  OBJECT IDENTIFIER ::= { t11FcSpPoMIBConformance 2 }
+
+t11FcSpPoMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+           "The compliance statement for entities that
+           support the Fabric Policies defined in FC-SP,"
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { t11FcSpPoActiveObjectsGroup }
+
+        GROUP        t11FcSpPoNonActiveObjectsGroup
+        DESCRIPTION
+            "These objects are mandatory for FC-SP Security Policy
+            Servers."
+
+        GROUP        t11FcSpPoNotifyObjectsGroup
+        DESCRIPTION
+            "These objects are mandatory for FC-SP Security Policy
+            Servers."
+
+        GROUP        t11FcSpPoNotificationGroup
+        DESCRIPTION
+            "These notifications are mandatory for FC-SP Security
+            Policy Servers."
+
+        GROUP        t11FcSpPoOperationsObjectsGroup
+        DESCRIPTION
+            "These objects are mandatory only for FC-SP Security
+            Policy Servers that support the activation/deactivation
+            of policies via SNMP."
+
+        GROUP        t11FcSpPoStatsObjectsGroup
+        DESCRIPTION
+            "These objects are optional."
+
+-- Write access is not required for any objects in this MIB module:
+
+        OBJECT       t11FcSpPoOperActivate
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoOperDeActivate
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNotificationEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSummaryPolicyNameType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSummaryPolicyName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSummaryHashStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSummaryRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwListFabricName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwListRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwMembFlags
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwMembDomainID
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwMembPolicyDataRole
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwMembAuthBehaviour
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwMembAttribute
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwMembRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaNoMembFlags
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaNoMembCtAccessIndex
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaNoMembAttribute
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaNoMembRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaCtDescrFlags
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaCtDescrGsType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaCtDescrGsSubType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaCtDescrRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwConnAllowedNameType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwConnAllowedName
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaSwConnRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaIpMgmtWkpIndex
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaIpMgmtAttribute
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaIpMgmtRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaWkpDescrFlags
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaWkpDescrWkpNumber
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaWkpDescrDestPort
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaWkpDescrRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaAttribType
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaAttribValue
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaAttribRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaAuthProtParams
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpPoNaAuthProtRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { t11FcSpPoMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FcSpPoActiveObjectsGroup OBJECT-GROUP
+    OBJECTS  {   t11FcSpPoPolicySummaryObjName,
+                 t11FcSpPoAdminFabricName,
+                 t11FcSpPoActivatedTimeStamp,
+                 t11FcSpPoSummaryPolicyType,
+                 t11FcSpPoSummaryHashFormat,
+                 t11FcSpPoSummaryHashValue,
+                 t11FcSpPoSwMembSwitchFlags,
+                 t11FcSpPoSwMembDomainID,
+                 t11FcSpPoSwMembPolicyDataRole,
+                 t11FcSpPoSwMembAuthBehaviour,
+                 t11FcSpPoSwMembAttribute,
+                 t11FcSpPoNoMembFlags,
+                 t11FcSpPoNoMembCtAccessIndex,
+                 t11FcSpPoNoMembAttribute,
+                 t11FcSpPoCtDescrFlags,
+                 t11FcSpPoCtDescrGsType,
+                 t11FcSpPoCtDescrGsSubType,
+                 t11FcSpPoSwConnAllowedNameType,
+                 t11FcSpPoSwConnAllowedName,
+                 t11FcSpPoIpMgmtWkpIndex,
+                 t11FcSpPoIpMgmtAttribute,
+                 t11FcSpPoWkpDescrFlags,
+                 t11FcSpPoWkpDescrWkpNumber,
+                 t11FcSpPoWkpDescrDestPort,
+                 t11FcSpPoAttribType,
+                 t11FcSpPoAttribValue,
+                 t11FcSpPoAttribExtension,
+                 t11FcSpPoAuthProtParams
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of MIB objects that contain information
+           about active Policy Objects that express Fibre Channel
+           Security (FC-SP) policy."
+    ::= { t11FcSpPoMIBGroups 1 }
+
+t11FcSpPoOperationsObjectsGroup OBJECT-GROUP
+    OBJECTS  {   t11FcSpPoOperActivate,
+                 t11FcSpPoOperDeActivate,
+                 t11FcSpPoOperResult,
+                 t11FcSpPoOperFailCause
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of MIB objects that allow a new set of
+           Fibre Channel Security (FC-SP) policies to be activated
+           or an existing set to be deactivated."
+    ::= { t11FcSpPoMIBGroups 2 }
+
+t11FcSpPoNonActiveObjectsGroup OBJECT-GROUP
+    OBJECTS  {   t11FcSpPoStorageType,
+                 t11FcSpPoNaSummaryPolicyNameType,
+                 t11FcSpPoNaSummaryPolicyName,
+                 t11FcSpPoNaSummaryHashStatus,
+                 t11FcSpPoNaSummaryHashFormat,
+                 t11FcSpPoNaSummaryHashValue,
+                 t11FcSpPoNaSummaryRowStatus,
+                 t11FcSpPoNaSwListFabricName,
+                 t11FcSpPoNaSwListRowStatus,
+                 t11FcSpPoNaSwMembFlags,
+                 t11FcSpPoNaSwMembDomainID,
+                 t11FcSpPoNaSwMembPolicyDataRole,
+                 t11FcSpPoNaSwMembAuthBehaviour,
+                 t11FcSpPoNaSwMembAttribute,
+                 t11FcSpPoNaSwMembRowStatus,
+                 t11FcSpPoNaNoMembFlags,
+                 t11FcSpPoNaNoMembCtAccessIndex,
+                 t11FcSpPoNaNoMembAttribute,
+                 t11FcSpPoNaNoMembRowStatus,
+                 t11FcSpPoNaCtDescrFlags,
+                 t11FcSpPoNaCtDescrGsType,
+                 t11FcSpPoNaCtDescrGsSubType,
+                 t11FcSpPoNaCtDescrRowStatus,
+                 t11FcSpPoNaSwConnAllowedNameType,
+                 t11FcSpPoNaSwConnAllowedName,
+                 t11FcSpPoNaSwConnRowStatus,
+                 t11FcSpPoNaIpMgmtWkpIndex,
+                 t11FcSpPoNaIpMgmtAttribute,
+                 t11FcSpPoNaIpMgmtRowStatus,
+                 t11FcSpPoNaWkpDescrFlags,
+                 t11FcSpPoNaWkpDescrWkpNumber,
+                 t11FcSpPoNaWkpDescrDestPort,
+                 t11FcSpPoNaWkpDescrRowStatus,
+                 t11FcSpPoNaAttribType,
+                 t11FcSpPoNaAttribValue,
+                 t11FcSpPoNaAttribExtension,
+                 t11FcSpPoNaAttribRowStatus,
+                 t11FcSpPoNaAuthProtParams,
+                 t11FcSpPoNaAuthProtRowStatus
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of MIB objects that contain information
+           about non-active Policy Objects available for activation
+           in order to change Fibre Channel Security (FC-SP) policy."
+    ::= { t11FcSpPoMIBGroups 3 }
+
+t11FcSpPoStatsObjectsGroup OBJECT-GROUP
+    OBJECTS  {   t11FcSpPoInRequests,
+                 t11FcSpPoInAccepts,
+                 t11FcSpPoInRejects
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of MIB objects that contain statistics
+           that can be maintained by FC-SP Security Policy Servers."
+    ::= { t11FcSpPoMIBGroups 4 }
+
+t11FcSpPoNotifyObjectsGroup OBJECT-GROUP
+    OBJECTS  {   t11FcSpPoNotificationEnable,
+                 t11FcSpPoServerAddress,
+                 t11FcSpPoLastNotifyType,
+                 t11FcSpPoRequestSource,
+                 t11FcSpPoReasonCode,
+                 t11FcSpPoCtCommandString,
+                 t11FcSpPoReasonCodeExp,
+                 t11FcSpPoReasonVendorCode
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of MIB objects to control the generation of
+           notifications concerning Fibre Channel Security (FC-SP)
+           policy, and to hold information contained in such
+           notifications."
+    ::= { t11FcSpPoMIBGroups 5 }
+
+t11FcSpPoNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS  {   t11FcSpPoNotifyActivation,
+                       t11FcSpPoNotifyActivateFail,
+                       t11FcSpPoNotifyDeactivation,
+                       t11FcSpPoNotifyDeactivateFail
+                   }
+    STATUS   current
+    DESCRIPTION
+           "A collection of notifications of events concerning
+           Fibre Channel Security (FC-SP) policy."
+    ::= { t11FcSpPoMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-SP-SA-MIB.mib b/snmp_builder/mibs/T11-FC-SP-SA-MIB.mib
new file mode 100644
index 0000000..8ea7008
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-SP-SA-MIB.mib
@@ -0,0 +1,2483 @@
+T11-FC-SP-SA-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Unsigned32, Counter32, Counter64, TimeTicks, Gauge32,
+    mib-2                 FROM SNMPv2-SMI              -- [RFC2578]
+    RowStatus, StorageType, AutonomousType, TimeStamp,
+    TruthValue            FROM SNMPv2-TC               -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+                          FROM SNMPv2-CONF             -- [RFC2580]
+    InterfaceIndex,
+    InterfaceIndexOrZero  FROM IF-MIB                  -- [RFC2863]
+    fcmInstanceIndex,
+    FcAddressIdOrZero     FROM FC-MGMT-MIB             -- [RFC4044]
+    T11FabricIndex        FROM T11-TC-MIB              -- [RFC4439]
+    T11FcSpType,
+    T11FcSpiIndex,
+    T11FcSpLifetimeLeft,
+    T11FcSpLifetimeLeftUnits,
+    T11FcSpSecurityProtocolId,
+    T11FcRoutingControl,
+    T11FcSaDirection,
+    T11FcSpPrecedence,
+    T11FcSpTransforms      FROM T11-FC-SP-TC-MIB;
+
+t11FcSpSaMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200808200000Z"
+    ORGANIZATION  "This MIB module was developed through the
+                  coordinated effort of two organizations:
+                  T11 began the development and the IETF (in
+                  the IMSS Working Group) finished it."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+           "This MIB module specifies the management information
+           required to manage Security Associations established via
+           Fibre Channel's FC-SP specification.
+
+           The MIB module consists of six parts:
+
+           - a per-Fabric table, t11FcSpSaIfTable, of capabilities,
+             parameters, status information, and counters; the counters
+             include non-transient aggregates of per-SA transient
+             counters;
+
+           - three tables, t11FcSpSaPropTable, t11FcSpSaTSelPropTable,
+             and t11FcSpSaTransTable, specifying the proposals for an
+             FC-SP entity acting as an SA_Initiator to present to the
+             SA_Responder during the negotiation of Security
+
+             Associations.  The same information is also used by an
+             FC-SP entity acting as an SA_Responder to decide what to
+             accept during the negotiation of Security Associations.
+             One of these tables, t11FcSpSaTransTable, is used not only
+             for information about security transforms to propose and
+             to accept, but also as agreed upon during the negotiation
+             of Security Associations;
+
+           - a table, t11FcSpSaTSelDrByTable, of Traffic Selectors
+             having the security action of 'drop' or 'bypass' to be
+             applied either to ingress traffic that is unprotected by
+             FC-SP, or to all egress traffic;
+
+           - four tables, t11FcSpSaPairTable, t11FcSpSaTSelNegInTable,
+             t11FcSpSaTSelNegOutTable, and t11FcSpSaTSelSpiTable,
+             containing information about active bidirectional pairs of
+             Security Associations; in particular, t11FcSpSaPairTable
+             has one row per active bidirectional SA pair,
+             t11FcSpSaTSelNegInTable and t11FcSpSaTSelNegOutTable
+             contain information on the Traffic Selectors negotiated on
+             the SAs, and the t11FcSpSaTSelSpiTable is an alternate
+             lookup table such that the Traffic Selector(s) in use on a
+             particular Security Association can be quickly determined
+             based on the (ingress) SPI value;
+
+           - a table, t11FcSpSaControlTable, of control and other
+             information concerning the generation of notifications for
+             events related to FC-SP Security Associations;
+
+           - one notification, t11FcSpSaNotifyAuthFailure, generated on
+             the occurrence of an Authentication failure for a received
+             FC-2 or CT_IU frame.
+
+           Copyright (C) The IETF Trust (2008).  This version
+           of this MIB module is part of RFC 5324;  see the RFC
+           itself for full legal notices."
+    REVISION  "200808200000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 5324."
+    ::= { mib-2 179 }
+
+t11FcSpSaMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpSaMIB 0 }
+t11FcSpSaMIBObjects     OBJECT IDENTIFIER ::= { t11FcSpSaMIB 1 }
+t11FcSpSaMIBConformance OBJECT IDENTIFIER ::= { t11FcSpSaMIB 2 }
+t11FcSpSaBase           OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 1 }
+t11FcSpSaConfig         OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 2 }
+t11FcSpSaActive         OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 3 }
+t11FcSpSaControl        OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 4 }
+
+--
+--  Base-level Per-Fabric Information
+--
+
+t11FcSpSaIfTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaIfEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing per-Fabric information related to
+           FC-SP Security Associations."
+    ::= { t11FcSpSaBase 1 }
+
+t11FcSpSaIfEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaIfEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information related to Security
+           Associations on a particular Fabric, and managed as part
+           of the Fibre Channel management instance identified by
+           fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaIfIndex,
+             t11FcSpSaIfFabricIndex }
+    ::= { t11FcSpSaIfTable 1 }
+
+T11FcSpSaIfEntry ::= SEQUENCE {
+    t11FcSpSaIfIndex               InterfaceIndexOrZero,
+    t11FcSpSaIfFabricIndex         T11FabricIndex,
+             -- capabilities
+    t11FcSpSaIfEspHeaderCapab      T11FcSpTransforms,
+    t11FcSpSaIfCTAuthCapab         T11FcSpTransforms,
+    t11FcSpSaIfIKEv2Capab          T11FcSpTransforms,
+    t11FcSpSaIfIkev2AuthCapab      TruthValue,
+             -- parameters and status
+    t11FcSpSaIfStorageType         StorageType,
+    t11FcSpSaIfReplayPrevention    TruthValue,
+    t11FcSpSaIfReplayWindowSize    Unsigned32,
+    t11FcSpSaIfDeadPeerDetections  Counter32,
+    t11FcSpSaIfTerminateAllSas     INTEGER,
+             -- summary frame counters
+    t11FcSpSaIfOutDrops            Counter64,
+    t11FcSpSaIfOutBypasses         Counter64,
+    t11FcSpSaIfOutProcesses        Counter64,
+    t11FcSpSaIfOutUnMatcheds       Counter64,
+    t11FcSpSaIfInUnprotUnmtchDrops Counter64,
+             -- aggregates of per-SA transient counters
+    t11FcSpSaIfInDetReplays        Counter64,
+    t11FcSpSaIfInUnprotMtchDrops   Counter64,
+    t11FcSpSaIfInBadXforms         Counter64,
+    t11FcSpSaIfInGoodXforms        Counter64,
+    t11FcSpSaIfInProtUnmtchs       Counter64
+}
+
+t11FcSpSaIfIndex OBJECT-TYPE
+    SYNTAX       InterfaceIndexOrZero
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object has a non-zero value to identify a particular
+           interface, or the value zero to indicate that the
+           information in this row applies to all (of the management
+           instance's) interfaces to the particular Fabric.
+
+           If any row has a non-zero value of t11FcSpSaIfIndex, then
+           all rows for the same Fibre Channel management instance must
+           also have a non-zero value of t11FcSpSaIfIndex and thereby
+           be specific to a particular interface.
+
+           As and when zero values of t11FcSpSaIfIndex are used in
+           this table, then they must also be used in each other
+           table that has t11FcSpSaIfIndex in its INDEX clause."
+    ::= { t11FcSpSaIfEntry 1 }
+
+t11FcSpSaIfFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           Fabric."
+    ::= { t11FcSpSaIfEntry 2 }
+
+t11FcSpSaIfEspHeaderCapab OBJECT-TYPE
+    SYNTAX       T11FcSpTransforms
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "A list of the standardized transforms supported by this
+           entity on this interface for ESP_Header protection."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Appendix A.3.1, tables A.23, A.25."
+    ::= { t11FcSpSaIfEntry 3 }
+
+t11FcSpSaIfCTAuthCapab OBJECT-TYPE
+    SYNTAX       T11FcSpTransforms
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "A list of the standardized transforms supported by this
+           entity on this interface for CT_Authentication protection."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Appendix A.3.1, tables A.23, A.25."
+    ::= { t11FcSpSaIfEntry 4 }
+
+t11FcSpSaIfIKEv2Capab OBJECT-TYPE
+    SYNTAX       T11FcSpTransforms
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "A list of the standardized transforms supported by this
+           entity on this interface with IKEv2 protection."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Appendix A.3.1, tables A.23, A.24,
+              A.25, A.26."
+    ::= { t11FcSpSaIfEntry 5 }
+
+t11FcSpSaIfIkev2AuthCapab OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "An indication of whether the entity is capable of
+           supporting the IKEv2-AUTH protocol on this interface, i.e.,
+           concatenation of Authentication and SA Management
+           Transactions, such that an SA Management Transaction is
+           used to perform both the authentication function and
+           SA management."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.7.2, and table A.27."
+    ::= { t11FcSpSaIfEntry 6 }
+
+t11FcSpSaIfStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization of
+           information related to FC-SP Security Associations
+           for interface(s) to a particular Fabric; specifically,
+           for rows created and/or modified in these tables:
+
+                   t11FcSpSaPropTable
+                   t11FcSpSaTSelDrByTable
+                   t11FcSpSaControlTable
+
+           and, for modified information contained in the same
+           row as an instance of this object.
+
+           Even if an instance of this object has the value
+           'permanent(4)', none of the information defined in
+           this MIB module for interface(s) to the given Fabric
+           need to be writable."
+    ::= { t11FcSpSaIfEntry 7 }
+
+t11FcSpSaIfReplayPrevention  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object indicates whether anti-replay protection is
+           enabled for frame reception on this interface.
+
+           Note that the replay-protection mechanism in FC-SP is
+           conceptually similar to the corresponding mechanism in
+           IPsec ESP."
+    REFERENCE
+           "- IP Encapsulating Security Payload (ESP),
+              RFC 4303, December 2005, section 3.3.3."
+    ::= { t11FcSpSaIfEntry 8 }
+
+t11FcSpSaIfReplayWindowSize OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "The size of the replay window to be used when
+           anti-replay protection is enabled for frame reception
+           on this interface.
+
+           Note that the replay-protection mechanism in FC-SP is
+           conceptually similar to the corresponding mechanism in
+           IPsec ESP."
+    REFERENCE
+           "- IP Encapsulating Security Payload (ESP),
+              RFC 4303, December 2005, section 3.4.3."
+    ::= { t11FcSpSaIfEntry 9 }
+
+t11FcSpSaIfDeadPeerDetections OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a dead peer condition has been
+           detected on this interface.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 8.5.3.3."
+    ::= { t11FcSpSaIfEntry 10 }
+
+t11FcSpSaIfTerminateAllSas OBJECT-TYPE
+    SYNTAX       INTEGER { noop(1), terminate(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "Setting this object to 'terminate' is a request to
+           terminate all outstanding Security Associations on this
+           interface.
+
+           When read, the value of this object is always 'noop'.
+           Setting this object to 'noop' has no effect."
+    ::= { t11FcSpSaIfEntry 11 }
+
+t11FcSpSaIfOutDrops OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of output frames that were dropped, instead
+           of being transmitted on this interface, because they matched
+           an active (at that time) Traffic Selector with an action of
+           'Drop'.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 12 }
+
+t11FcSpSaIfOutBypasses        OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of output frames that were transmitted
+           unchanged by FC-SP on this interface because they matched
+           an active (at that time) Traffic Selector with an action
+           of 'Bypass'.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 13 }
+
+t11FcSpSaIfOutProcesses       OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of output frames that were protected by FC-SP
+           before being transmitted on this interface because they
+           matched an active (at that time) Traffic Selector with an
+           action of 'Process'.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 14 }
+
+t11FcSpSaIfOutUnMatcheds OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of frames that were transmitted unchanged by
+           FC-SP on this interface because they did not match any
+           Traffic Selector active at that time.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 15 }
+
+t11FcSpSaIfInUnprotUnmtchDrops OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of frames received on this interface that
+           were dropped because they were unprotected and did not
+           match any Traffic Selector active at that time.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 16 }
+
+t11FcSpSaIfInDetReplays OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a replay has been detected on
+           a Security Association that is currently active or was
+           previously active on this interface.  Note that a frame
+           that is discarded because it is 'behind' the window,
+           i.e., too old, is counted as a replay.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 17 }
+
+t11FcSpSaIfInUnprotMtchDrops OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a frame received on this
+           interface was dropped because it matched with a Traffic
+           Selector for a Security Association that was active at
+           the time of receipt but the frame was not protected as
+           negotiated for that Security Association.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 18 }
+
+t11FcSpSaIfInBadXforms OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a frame received on this
+           interface was dropped because of a failure of one of the
+           transforms negotiated for the Security Association on
+           which it was received.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 19 }
+
+t11FcSpSaIfInGoodXforms OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of frames received on this interface on a
+           Security Association for which the transforms negotiated
+           for that Security Association were successfully applied,
+           and that matched a Traffic Selector for that Security
+           Association.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 20 }
+
+t11FcSpSaIfInProtUnmtchs OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of frames received on this interface that
+           were dropped because they did not match any of the Traffic
+           Selectors negotiated for the Security Association on which
+           they were received, even though the Security Association's
+           transforms were successfully applied.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaIfEntry 21 }
+
+--
+--  Proposals to present in Security Association negotiation
+--
+
+t11FcSpSaPropTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaPropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of proposals for an FC-SP entity acting as an
+           SA_Initiator to present to the SA_Responder during the
+           negotiation of Security Associations.  This information
+           is also used by an FC-SP entity acting as an SA_Responder
+           to decide what to accept during the negotiation of
+           Security Associations."
+    ::= { t11FcSpSaConfig 1 }
+
+t11FcSpSaPropEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaPropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one proposal for
+           the FC-SP entity to present, or what to accept, during
+           the negotiation of Security Associations on one or more
+           interfaces (identified by t11FcSpSaIfIndex) to a
+           particular Fabric (identified by t11FcSpSaIfFabricIndex),
+           and managed as part of the Fibre Channel management
+           instance identified by fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11FcSpSaIfStorageType that is INDEX-ed
+           by the same values of fcmInstanceIndex, t11FcSpSaIfIndex
+           and t11FcSpSaIfFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaIfIndex,
+             t11FcSpSaIfFabricIndex,
+             t11FcSpSaPropIndex }
+    ::= { t11FcSpSaPropTable 1 }
+
+T11FcSpSaPropEntry ::= SEQUENCE {
+    t11FcSpSaPropIndex             Unsigned32,
+    t11FcSpSaPropSecurityProt      T11FcSpSecurityProtocolId,
+    t11FcSpSaPropTSelListIndex     Unsigned32,
+    t11FcSpSaPropTransListIndex    Unsigned32,
+    t11FcSpSaPropAcceptAlgorithm   INTEGER,
+    t11FcSpSaPropOutMatchSucceeds  Counter64,
+    t11FcSpSaPropRowStatus         RowStatus
+}
+
+t11FcSpSaPropIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           proposal for use on one or more interfaces to a Fabric."
+    ::= { t11FcSpSaPropEntry 1 }
+
+t11FcSpSaPropSecurityProt OBJECT-TYPE
+    SYNTAX       T11FcSpSecurityProtocolId
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The Security Protocol identifier for this proposal, i.e.,
+           whether the proposal is for traffic to be protected using
+           ESP_Header or CT_Authentication."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.3.2.2 and table 67."
+    ::= { t11FcSpSaPropEntry 2 }
+
+t11FcSpSaPropTSelListIndex OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "When the value of this object is non-zero, it points
+           to the proposal's list of Traffic Selectors.  The value
+           must be non-zero in an active row of this table.
+
+           The identified list is represented by all rows in the
+           t11FcSpSaTSelPropTable for which t11FcSpSaTSelPropListIndex
+           has the same value as this object (and with corresponding
+           values of t11FcSpSaIfIndex and fcmInstanceIndex)."
+    ::= { t11FcSpSaPropEntry 3 }
+
+t11FcSpSaPropTransListIndex OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "When the value of this object is non-zero, it points to
+           the proposal's list of Transforms.  The value must be
+           non-zero in an active row of this table.
+
+           The identified list is represented by all rows in the
+           t11FcSpSaTransTable for which t11FcSpSaTransListIndex
+           has the same value as this object (and with corresponding
+           values of t11FcSpSaIfIndex and fcmInstanceIndex)."
+    ::= { t11FcSpSaPropEntry 4 }
+
+t11FcSpSaPropAcceptAlgorithm OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     intersection(1),
+                     union(2),
+                     other(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The algorithm by which an SA_Responder in an SA negotiation
+           decides on which Traffic Selectors to specify in a response
+           to an IKE_Create_Child_SA request.  This algorithm is used
+
+           when the Traffic Selectors specified by an SA_Initiator in
+           an IKE_Create_Child_SA request overlap with this proposal's
+           list of Traffic Selectors:
+
+           intersection(1) - the SA_Responder specifies the largest
+                         subset of what the SA_Initiator proposed,
+                         which is also a subset of this proposal's
+                         Traffic Selectors.
+
+           union(2)    - the SA_Responder specifies the smallest
+                         superset of what the SA_Initiator proposed,
+                         which is also a superset of this proposal's
+                         Traffic Selectors.
+
+           other(3)    - the SA_Responder uses some other algorithm.
+           "
+    ::= { t11FcSpSaPropEntry 5 }
+
+t11FcSpSaPropOutMatchSucceeds OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of egress frames that have matched a Traffic
+           Selector that was negotiated to select traffic for an
+           SA based on this proposal being accepted.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaPropEntry 6 }
+
+t11FcSpSaPropRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of a row.  Values of object instances
+           within an active row can be modified at any time.
+
+           The status cannot be set to 'active' unless and
+           until the instances of t11FcSpSaPropTSelListIndex
+           and t11FcSpSaPropTransListIndex in the row have
+           been set to point to active rows in the
+           t11FcSpSaTSelPropTable and t11FcSpSaTransTable
+           tables, respectively.  A row in this table is
+           deleted if the active rows it points to are deleted."
+    ::= { t11FcSpSaPropEntry 7 }
+
+--
+--  Traffic Selector Proposals
+--
+
+t11FcSpSaTSelPropTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaTSelPropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about Traffic Selectors
+           to propose and/or to accept during the negotiation of
+           Security Associations."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5.
+            - Use of IKEv2 in FC-SP, RFC 4595,
+              July 2006, section 4.4."
+    ::= { t11FcSpSaConfig 2 }
+
+t11FcSpSaTSelPropEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaTSelPropEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one Traffic
+           Selector within a list of Traffic Selectors to propose,
+           or for use in determining what to accept during Security
+           Association negotiation.
+
+           One such list is configured for use on a Fabric by
+           configuring the list's value of t11FcSpSaTSelPropListIndex
+           as the value of an instance of t11FcSpSaPropTSelListIndex,
+           for corresponding values of t11FcSpSaIfIndex and
+           fcmInstanceIndex.  Further, the proposing and accepting
+           of Traffic Selectors is only done as a part of a proposal
+           specified by a row of the t11FcSpSaPropTable, i.e.,
+           in combination with the proposing and accepting of security
+           transforms as specified by the combination of
+           t11FcSpSaPropTSelListIndex and t11FcSpSaPropTransListIndex
+           in one row of the t11FcSpSaPropTable.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11FcSpSaTSelPropStorageType in that row."
+    INDEX  { fcmInstanceIndex, t11FcSpSaIfIndex,
+             t11FcSpSaTSelPropListIndex, t11FcSpSaTSelPropPrecedence }
+    ::= { t11FcSpSaTSelPropTable 1 }
+
+T11FcSpSaTSelPropEntry ::= SEQUENCE {
+    t11FcSpSaTSelPropListIndex    Unsigned32,
+    t11FcSpSaTSelPropPrecedence   T11FcSpPrecedence,
+    t11FcSpSaTSelPropDirection    T11FcSaDirection,
+    t11FcSpSaTSelPropStartSrcAddr FcAddressIdOrZero,
+    t11FcSpSaTSelPropEndSrcAddr   FcAddressIdOrZero,
+    t11FcSpSaTSelPropStartDstAddr FcAddressIdOrZero,
+    t11FcSpSaTSelPropEndDstAddr   FcAddressIdOrZero,
+    t11FcSpSaTSelPropStartRCtl    T11FcRoutingControl,
+    t11FcSpSaTSelPropEndRCtl      T11FcRoutingControl,
+    t11FcSpSaTSelPropStartType    T11FcSpType,
+    t11FcSpSaTSelPropEndType      T11FcSpType,
+    t11FcSpSaTSelPropStorageType  StorageType,
+    t11FcSpSaTSelPropRowStatus    RowStatus
+}
+
+t11FcSpSaTSelPropListIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that identifies a particular list of
+           Traffic Selectors."
+    ::= { t11FcSpSaTSelPropEntry 1 }
+
+t11FcSpSaTSelPropPrecedence OBJECT-TYPE
+    SYNTAX       T11FcSpPrecedence
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The precedence of this Traffic Selector.  Each
+           Traffic Selector within a particular list of
+           Traffic Selectors must have a different precedence.
+
+           If an egress frame matches multiple Traffic Selectors,
+           it should be transmitted on the SA associated with the
+           Traffic Selector having the numerically smallest
+           precedence value."
+    ::= { t11FcSpSaTSelPropEntry 2 }
+
+t11FcSpSaTSelPropDirection OBJECT-TYPE
+    SYNTAX       T11FcSaDirection
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "An indication of whether this Traffic Selector is
+           to be proposed for ingress or egress traffic."
+    DEFVAL   { egress }
+    ::= { t11FcSpSaTSelPropEntry 3 }
+
+t11FcSpSaTSelPropStartSrcAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { '000000'h }
+    ::= { t11FcSpSaTSelPropEntry 4 }
+
+t11FcSpSaTSelPropEndSrcAddr  OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { 'FFFFFF'h }
+    ::= { t11FcSpSaTSelPropEntry 5 }
+
+t11FcSpSaTSelPropStartDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { '000000'h }
+    ::= { t11FcSpSaTSelPropEntry 6 }
+
+t11FcSpSaTSelPropEndDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { 'FFFFFF'h }
+    ::= { t11FcSpSaTSelPropEntry 7 }
+
+t11FcSpSaTSelPropStartRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { '00'h }
+    ::= { t11FcSpSaTSelPropEntry 8 }
+
+t11FcSpSaTSelPropEndRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { 'FF'h }
+    ::= { t11FcSpSaTSelPropEntry 9 }
+
+t11FcSpSaTSelPropStartType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { '0000'h }
+    ::= { t11FcSpSaTSelPropEntry 10 }
+
+t11FcSpSaTSelPropEndType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.4.5."
+    DEFVAL   { 'FFFF'h }
+    ::= { t11FcSpSaTSelPropEntry 11 }
+
+t11FcSpSaTSelPropStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization of
+           the information in this row.
+
+           Even if an instance of this object has the value
+           'permanent(4)', none of the information in its row
+           needs to be writable."
+    ::= { t11FcSpSaTSelPropEntry 12 }
+
+t11FcSpSaTSelPropRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpSaTSelPropEntry 13 }
+
+--
+--  Transform Proposals
+--
+
+t11FcSpSaTransTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaTransEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about security transforms
+           to propose, to accept and/or agreed upon during the
+           negotiation of Security Associations."
+    ::= { t11FcSpSaConfig 3 }
+
+t11FcSpSaTransEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaTransEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one proposal within a
+           list of security transforms to be proposed, to be accepted,
+           or already agreed upon, for use on a pair of Security
+           Associations on one or more interfaces (identified by
+           t11FcSpSaIfIndex), managed as part of the Fibre Channel
+           management instance identified by fcmInstanceIndex.
+
+           One such list is configured to be proposed or accepted for
+           use on a Fabric, by having the list's value of
+           t11FcSpSaTransListIndex be the value of an instance of
+           t11FcSpSaPropTransListIndex for that Fabric.  Further,
+           the proposing and accepting of security transforms is only
+           done as a part of a proposal specified by a row of the
+           t11FcSpSaPropTable, i.e., in combination with the proposing
+           and accepting of Traffic Selectors as specified by the
+           combination of t11FcSpSaPropTSelListIndex and
+           t11FcSpSaPropTransListIndex in one row of the
+           t11FcSpSaPropTable.
+
+           The security (encryption and integrity) transform in use on
+           an SA pair is indicated by having the pair's values of
+           t11FcSpSaPairTransListIndex and t11FcSpSaPairTransIndex
+           contain the values of t11FcSpSaTransListIndex and
+           t11FcSpSaTransIndex for the transform's row in this table.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11FcSpSaTransStorageType in that row."
+    INDEX  { fcmInstanceIndex, t11FcSpSaIfIndex,
+             t11FcSpSaTransListIndex, t11FcSpSaTransIndex }
+    ::= { t11FcSpSaTransTable 1 }
+
+T11FcSpSaTransEntry ::= SEQUENCE {
+    t11FcSpSaTransListIndex      Unsigned32,
+    t11FcSpSaTransIndex          Unsigned32,
+    t11FcSpSaTransSecurityProt   T11FcSpSecurityProtocolId,
+    t11FcSpSaTransEncryptAlg     AutonomousType,
+    t11FcSpSaTransEncryptKeyLen  Unsigned32,
+    t11FcSpSaTransIntegrityAlg   AutonomousType,
+    t11FcSpSaTransStorageType    StorageType,
+    t11FcSpSaTransRowStatus      RowStatus
+}
+
+t11FcSpSaTransListIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies a particular
+           list of security transforms to be proposed, to be accepted,
+           or already agreed upon."
+    ::= { t11FcSpSaTransEntry 1 }
+
+t11FcSpSaTransIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies one security
+           transform within a list identified by
+           t11FcSpSaTransListIndex."
+    ::= { t11FcSpSaTransEntry 2 }
+
+t11FcSpSaTransSecurityProt OBJECT-TYPE
+    SYNTAX       T11FcSpSecurityProtocolId
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The Security Protocol identifier that indicates
+           whether this transform is for traffic to be protected
+           using ESP_Header or using CT_Authentication."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.3.2.2 and table 67."
+    ::= { t11FcSpSaTransEntry 3 }
+
+t11FcSpSaTransEncryptAlg OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The Encryption Algorithm for this transform."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.3.2.3 and tables 69 & 70."
+    ::= { t11FcSpSaTransEntry 4 }
+
+t11FcSpSaTransEncryptKeyLen OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The key length in bits to be used with an encryption
+           algorithm that has a variable length key.  This object
+           is ignored when the corresponding instance of
+           t11FcSpSaTransEncryptAlg specifies an algorithm with a
+           fixed length key."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.3.2.5 and table 77."
+    ::= { t11FcSpSaTransEntry 5 }
+
+t11FcSpSaTransIntegrityAlg OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The Integrity Algorithm for this transform."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.3.2.3 and tables 69 & 72."
+    ::= { t11FcSpSaTransEntry 6 }
+
+t11FcSpSaTransStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization of
+           the information in this row.
+
+           Even if an instance of this object has the value
+
+           'permanent(4)', none of the information in its row
+           needs to be writable."
+    ::= { t11FcSpSaTransEntry 7 }
+
+t11FcSpSaTransRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.
+
+           When an instance of t11FcSpSaPairTransListIndex points to
+           a row in this table, values of object instances in the row
+           cannot be modified nor can the row be deleted.  Otherwise,
+           a row can be modified or deleted at any time."
+    ::= { t11FcSpSaTransEntry 8 }
+
+--
+--  Traffic Selectors for Drop & Bypass
+--
+
+t11FcSpSaTSelDrByTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaTSelDrByEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing Traffic Selectors to select which
+           traffic is to be dropped or is to bypass further
+           security processing."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 4.6, 4.7, and 6.4.5.
+            - Use of IKEv2 in FC-SP, RFC 4595,
+              July 2006, section 4.4."
+    ::= { t11FcSpSaConfig 4 }
+
+t11FcSpSaTSelDrByEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaTSelDrByEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry represents one Traffic Selector having the
+           security action of 'drop' or 'bypass', which is applied
+           based on a precedence value, either to ingress traffic
+           that is unprotected by FC-SP, or to all egress
+           traffic on one or more interfaces (identified by
+           t11FcSpSaIfIndex) to a particular Fabric (identified
+
+           by t11FcSpSaIfFabricIndex), and managed as part of the Fibre
+           Channel management instance identified by fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11FcSpSaIfStorageType that is INDEX-ed
+           by the same values of fcmInstanceIndex, t11FcSpSaIfIndex
+           and t11FcSpSaIfFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaIfIndex, t11FcSpSaIfFabricIndex,
+             t11FcSpSaTSelDrByDirection, t11FcSpSaTSelDrByPrecedence }
+    ::= { t11FcSpSaTSelDrByTable 1 }
+
+T11FcSpSaTSelDrByEntry ::= SEQUENCE {
+    t11FcSpSaTSelDrByDirection     T11FcSaDirection,
+    t11FcSpSaTSelDrByPrecedence    T11FcSpPrecedence,
+    t11FcSpSaTSelDrByAction        INTEGER,
+    t11FcSpSaTSelDrByStartSrcAddr  FcAddressIdOrZero,
+    t11FcSpSaTSelDrByEndSrcAddr    FcAddressIdOrZero,
+    t11FcSpSaTSelDrByStartDstAddr  FcAddressIdOrZero,
+    t11FcSpSaTSelDrByEndDstAddr    FcAddressIdOrZero,
+    t11FcSpSaTSelDrByStartRCtl     T11FcRoutingControl,
+    t11FcSpSaTSelDrByEndRCtl       T11FcRoutingControl,
+    t11FcSpSaTSelDrByStartType     T11FcSpType,
+    t11FcSpSaTSelDrByEndType       T11FcSpType,
+    t11FcSpSaTSelDrByMatches       Counter64,
+    t11FcSpSaTSelDrByRowStatus     RowStatus
+}
+
+t11FcSpSaTSelDrByDirection OBJECT-TYPE
+    SYNTAX       T11FcSaDirection
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An indication of whether this Traffic Selector is
+           for ingress or egress traffic."
+    ::= { t11FcSpSaTSelDrByEntry 1 }
+
+t11FcSpSaTSelDrByPrecedence OBJECT-TYPE
+    SYNTAX       T11FcSpPrecedence
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The precedence of this Traffic Selector.  If and when a
+           frame is compared against multiple Traffic Selectors, and
+           multiple of them have a match with the frame, the security
+           action to be taken for the frame is that specified for the
+           matching Traffic Selector having the numerically smallest
+           precedence value."
+    ::= { t11FcSpSaTSelDrByEntry 2 }
+
+t11FcSpSaTSelDrByAction OBJECT-TYPE
+    SYNTAX       INTEGER { drop(1), bypass(2) }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The security action to be taken for a frame that
+           matches this Traffic Selector."
+    DEFVAL   { drop }
+    ::= { t11FcSpSaTSelDrByEntry 3 }
+
+t11FcSpSaTSelDrByStartSrcAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    DEFVAL   { '000000'h }
+    ::= { t11FcSpSaTSelDrByEntry 4 }
+
+t11FcSpSaTSelDrByEndSrcAddr  OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    DEFVAL   { 'FFFFFF'h }
+    ::= { t11FcSpSaTSelDrByEntry 5 }
+
+t11FcSpSaTSelDrByStartDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    DEFVAL   { '000000'h }
+    ::= { t11FcSpSaTSelDrByEntry 6 }
+
+t11FcSpSaTSelDrByEndDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    DEFVAL   { 'FFFFFF'h }
+    ::= { t11FcSpSaTSelDrByEntry 7 }
+
+t11FcSpSaTSelDrByStartRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    DEFVAL   { '00'h }
+    ::= { t11FcSpSaTSelDrByEntry 8 }
+
+t11FcSpSaTSelDrByEndRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    DEFVAL   { 'FF'h }
+    ::= { t11FcSpSaTSelDrByEntry 9 }
+
+t11FcSpSaTSelDrByStartType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    DEFVAL   { '0000'h }
+    ::= { t11FcSpSaTSelDrByEntry 10 }
+
+t11FcSpSaTSelDrByEndType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    DEFVAL   { 'FFFF'h }
+    ::= { t11FcSpSaTSelDrByEntry 11 }
+
+t11FcSpSaTSelDrByMatches OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of frames for which the action specified by
+           the corresponding instance of t11FcSpSaTSelDrByAction was
+           taken because of a match with this Traffic Selector.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaTSelDrByEntry 12 }
+
+t11FcSpSaTSelDrByRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this row.  Values of object instances
+           within the row can be modified at any time."
+    ::= { t11FcSpSaTSelDrByEntry 13 }
+
+--
+--  Active Security Associations
+--
+
+t11FcSpSaPairTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaPairEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about active
+           bidirectional pairs of Security Associations."
+    ::= { t11FcSpSaActive 1 }
+
+t11FcSpSaPairEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaPairEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one active
+           bidirectional pair of Security Associations on an
+           interface to a particular Fabric (identified by
+           t11FcSpSaIfFabricIndex), managed as part of the Fibre
+           Channel management instance identified by
+           fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaPairIfIndex,
+             t11FcSpSaIfFabricIndex, t11FcSpSaPairInboundSpi }
+    ::= { t11FcSpSaPairTable 1 }
+
+T11FcSpSaPairEntry ::= SEQUENCE {
+    t11FcSpSaPairIfIndex           InterfaceIndex,
+    t11FcSpSaPairInboundSpi        T11FcSpiIndex,
+    t11FcSpSaPairSecurityProt      T11FcSpSecurityProtocolId,
+    t11FcSpSaPairTransListIndex    Unsigned32,
+    t11FcSpSaPairTransIndex        Unsigned32,
+    t11FcSpSaPairLifetimeLeft      T11FcSpLifetimeLeft,
+    t11FcSpSaPairLifetimeLeftUnits T11FcSpLifetimeLeftUnits,
+    t11FcSpSaPairTerminate         INTEGER,
+    t11FcSpSaPairInProtUnMatchs    Counter64,
+    t11FcSpSaPairInDetReplays      Counter64,
+    t11FcSpSaPairInBadXforms       Counter64,
+    t11FcSpSaPairInGoodXforms      Counter64
+}
+
+t11FcSpSaPairIfIndex OBJECT-TYPE
+    SYNTAX       InterfaceIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object identifies the interface to the particular
+           Fabric on which this SA pair is active."
+    ::= { t11FcSpSaPairEntry 1 }
+
+t11FcSpSaPairInboundSpi OBJECT-TYPE
+    SYNTAX       T11FcSpiIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The SPI value that is used to indicate that an incoming
+           frame was received on the ingress SA of this SA pair."
+    ::= { t11FcSpSaPairEntry 2 }
+
+t11FcSpSaPairSecurityProt OBJECT-TYPE
+    SYNTAX       T11FcSpSecurityProtocolId
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The object indicates whether this SA uses ESP_Header to
+           protect FC-2 frames, or CT_Authentication to protect Common
+           Transport Information Units (CT_IUs)."
+    ::= { t11FcSpSaPairEntry 3 }
+
+t11FcSpSaPairTransListIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The combination of this value and the value of the
+           corresponding instance of t11FcSpSaPairTransIndex
+           identify the row in the t11FcSpSaTransTable that
+           contains the transforms that are in use on this SA pair."
+    ::= { t11FcSpSaPairEntry 4 }
+
+t11FcSpSaPairTransIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The combination of this value and the value of the
+           corresponding instance of t11FcSpSaPairTransListIndex
+           identify the row in the t11FcSpSaTransTable that
+           contains the transforms that are in use on this SA pair."
+    ::= { t11FcSpSaPairEntry 5 }
+
+t11FcSpSaPairLifetimeLeft OBJECT-TYPE
+    SYNTAX       T11FcSpLifetimeLeft
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The remaining lifetime of this SA pair, given in the
+           units specified by the value of the corresponding
+           instance of t11FcSpSaPairLifetimeLeft."
+    ::= { t11FcSpSaPairEntry 6 }
+
+t11FcSpSaPairLifetimeLeftUnits OBJECT-TYPE
+    SYNTAX       T11FcSpLifetimeLeftUnits
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The units in which the value of the corresponding
+           instance of t11FcSpSaPairLifetimeLeft specifies the
+           remaining lifetime of this SA pair."
+    ::= { t11FcSpSaPairEntry 7 }
+
+t11FcSpSaPairTerminate OBJECT-TYPE
+    SYNTAX       INTEGER { noop(1), terminate(2) }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "Setting this object to 'terminate' is a request
+           to terminate this pair of Security Associations.
+
+           When read, the value of this object is always 'noop'.
+           Setting this object to 'noop' has no effect."
+    ::= { t11FcSpSaPairEntry 8 }
+
+t11FcSpSaPairInProtUnMatchs OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of frames received on this SA for which the
+           SA's transforms were successfully applied to the frame,
+           but the frame was still dropped because it did not match
+           any of the SA's ingress Traffic Selectors.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaPairEntry 9 }
+
+t11FcSpSaPairInDetReplays OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a replay has been detected on
+           this Security Association.  Note that a frame that is
+           discarded because it is 'behind' the window, i.e., too old,
+           is counted as a replay.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaPairEntry 10 }
+
+t11FcSpSaPairInBadXforms OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a received frame was dropped
+           because one of the transforms negotiated for this Security
+           Association failed.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaPairEntry 11 }
+
+t11FcSpSaPairInGoodXforms OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of received frames for which the transforms
+           negotiated for this Security Association, were
+           successfully applied.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaPairEntry 12 }
+
+--
+--  Negotiated Ingress Traffic Selectors
+--
+
+t11FcSpSaTSelNegInTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaTSelNegInEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about ingress Traffic
+           Selectors that are in use on active Security
+           Associations."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 4.6, 4.7, and 6.4.5.
+            - Use of IKEv2 in FC-SP, RFC 4595,
+              July 2006, section 4.4."
+    ::= { t11FcSpSaActive 2 }
+
+t11FcSpSaTSelNegInEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaTSelNegInEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one ingress Traffic
+           Selector that is in use on an active Security Association
+           on an interface (identified by t11FcSpSaPairIfIndex) to
+           a particular Fabric (identified by t11FcSpSaIfFabricIndex),
+           managed as part of the Fibre Channel management instance
+           identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaPairIfIndex,
+             t11FcSpSaIfFabricIndex, t11FcSpSaTSelNegInIndex }
+    ::= { t11FcSpSaTSelNegInTable 1 }
+
+T11FcSpSaTSelNegInEntry ::= SEQUENCE {
+    t11FcSpSaTSelNegInIndex         Unsigned32,
+    t11FcSpSaTSelNegInInboundSpi    T11FcSpiIndex,
+    t11FcSpSaTSelNegInStartSrcAddr  FcAddressIdOrZero,
+    t11FcSpSaTSelNegInEndSrcAddr    FcAddressIdOrZero,
+    t11FcSpSaTSelNegInStartDstAddr  FcAddressIdOrZero,
+    t11FcSpSaTSelNegInEndDstAddr    FcAddressIdOrZero,
+    t11FcSpSaTSelNegInStartRCtl     T11FcRoutingControl,
+    t11FcSpSaTSelNegInEndRCtl       T11FcRoutingControl,
+    t11FcSpSaTSelNegInStartType     T11FcSpType,
+    t11FcSpSaTSelNegInEndType       T11FcSpType,
+    t11FcSpSaTSelNegInUnpMtchDrops  Counter64
+}
+
+t11FcSpSaTSelNegInIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value to distinguish an ingress Traffic Selector
+           from all others currently in use by Security Associations
+           on the same interface to a particular Fabric."
+    ::= { t11FcSpSaTSelNegInEntry 1 }
+
+t11FcSpSaTSelNegInInboundSpi OBJECT-TYPE
+    SYNTAX       T11FcSpiIndex
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The SPI of the ingress SA on which this Traffic Selector
+           is in use.
+
+           This value can be used to find the SA pair's row in the
+           t11FcSpSaPairTable."
+    ::= { t11FcSpSaTSelNegInEntry 2 }
+
+t11FcSpSaTSelNegInStartSrcAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegInEntry 3 }
+
+t11FcSpSaTSelNegInEndSrcAddr  OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegInEntry 4 }
+
+t11FcSpSaTSelNegInStartDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    ::= { t11FcSpSaTSelNegInEntry 5 }
+
+t11FcSpSaTSelNegInEndDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    ::= { t11FcSpSaTSelNegInEntry 6 }
+
+t11FcSpSaTSelNegInStartRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    ::= { t11FcSpSaTSelNegInEntry 7 }
+
+t11FcSpSaTSelNegInEndRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    ::= { t11FcSpSaTSelNegInEntry 8 }
+
+t11FcSpSaTSelNegInStartType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegInEntry 9 }
+
+t11FcSpSaTSelNegInEndType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegInEntry 10 }
+
+t11FcSpSaTSelNegInUnpMtchDrops OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of times that a received frame was dropped
+           because it matched with this Traffic Selector but the
+           frame was not protected as negotiated for the Security
+           Association identified by t11FcSpSaTSelNegInInboundSpi.
+
+           This counter has no discontinuities other than those
+           that all Counter64's have when sysUpTime=0."
+    ::= { t11FcSpSaTSelNegInEntry 11 }
+
+--
+--  Negotiated Egress Traffic Selectors
+--
+
+t11FcSpSaTSelNegOutTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaTSelNegOutEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about egress Traffic
+           Selectors that are in use on active Security
+           Associations."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, sections 4.6, 4.7, and 6.4.5.
+            - Use of IKEv2 in FC-SP, RFC 4595,
+              July 2006, section 4.4."
+    ::= { t11FcSpSaActive 3 }
+
+t11FcSpSaTSelNegOutEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaTSelNegOutEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about one egress Traffic
+           Selector that is in use on an active Security Association
+           on an interface (identified by t11FcSpSaPairIfIndex) to
+           a particular Fabric (identified by t11FcSpSaIfFabricIndex),
+           managed as part of the Fibre Channel management instance
+           identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaPairIfIndex,
+             t11FcSpSaIfFabricIndex, t11FcSpSaTSelNegOutPrecedence }
+    ::= { t11FcSpSaTSelNegOutTable 1 }
+
+T11FcSpSaTSelNegOutEntry ::= SEQUENCE {
+    t11FcSpSaTSelNegOutPrecedence     T11FcSpPrecedence,
+    t11FcSpSaTSelNegOutInboundSpi     T11FcSpiIndex,
+    t11FcSpSaTSelNegOutStartSrcAddr   FcAddressIdOrZero,
+    t11FcSpSaTSelNegOutEndSrcAddr     FcAddressIdOrZero,
+    t11FcSpSaTSelNegOutStartDstAddr   FcAddressIdOrZero,
+    t11FcSpSaTSelNegOutEndDstAddr     FcAddressIdOrZero,
+    t11FcSpSaTSelNegOutStartRCtl      T11FcRoutingControl,
+    t11FcSpSaTSelNegOutEndRCtl        T11FcRoutingControl,
+    t11FcSpSaTSelNegOutStartType      T11FcSpType,
+    t11FcSpSaTSelNegOutEndType        T11FcSpType
+}
+
+t11FcSpSaTSelNegOutPrecedence OBJECT-TYPE
+    SYNTAX       T11FcSpPrecedence
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The precedence of this Traffic Selector.  If and when a
+           frame is compared against multiple Traffic Selectors, and
+           multiple of them have a match with the frame, the security
+           action to be taken for the frame is that specified for the
+           matching Traffic Selector having the numerically smallest
+           precedence value."
+    ::= { t11FcSpSaTSelNegOutEntry 1 }
+
+t11FcSpSaTSelNegOutInboundSpi OBJECT-TYPE
+    SYNTAX       T11FcSpiIndex
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The SPI of the ingress SA of the SA pair for which this
+           Traffic Selector is in use on the egress SA.
+
+           This value can be used to find the SA pair's row in the
+           t11FcSpSaPairTable."
+    ::= { t11FcSpSaTSelNegOutEntry 2 }
+
+t11FcSpSaTSelNegOutStartSrcAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 3 }
+
+t11FcSpSaTSelNegOutEndSrcAddr  OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a source address
+           (S_ID) of a frame that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 4 }
+
+t11FcSpSaTSelNegOutStartDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 5 }
+
+t11FcSpSaTSelNegOutEndDstAddr OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero (SIZE (3))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 24-bit value of a destination
+           address (D_ID) of a frame that will match with this
+           Traffic Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 6 }
+
+t11FcSpSaTSelNegOutStartRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 7 }
+
+t11FcSpSaTSelNegOutEndRCtl OBJECT-TYPE
+    SYNTAX       T11FcRoutingControl
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest 8-bit value contained within a
+           Routing Control (R_CTL) field of a frame that will match
+           with this Traffic Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 8 }
+
+t11FcSpSaTSelNegOutStartType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically smallest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 9 }
+
+t11FcSpSaTSelNegOutEndType OBJECT-TYPE
+    SYNTAX       T11FcSpType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The numerically largest of a range of possible 'type'
+           values of frames that will match with this Traffic
+           Selector."
+    ::= { t11FcSpSaTSelNegOutEntry 10 }
+
+--
+--  Traffic Selectors index-ed by SPI
+--
+
+t11FcSpSaTSelSpiTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaTSelSpiEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table identifying the Traffic Selectors in use on
+           particular Security Associations, INDEX-ed by their
+           (ingress) SPI values."
+    ::= { t11FcSpSaActive 4 }
+
+t11FcSpSaTSelSpiEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaTSelSpiEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry identifies one Traffic Selector in use on an SA
+           pair on the interface (identified by t11FcSpSaPairIfIndex)
+           to a particular Fabric (identified by
+           t11FcSpSaIfFabricIndex), and managed as part of the Fibre
+           Channel management instance identified by fcmInstanceIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaPairIfIndex,
+             t11FcSpSaIfFabricIndex,
+             t11FcSpSaTSelSpiInboundSpi, t11FcSpSaTSelSpiTrafSelIndex }
+    ::= { t11FcSpSaTSelSpiTable 1 }
+
+T11FcSpSaTSelSpiEntry ::= SEQUENCE {
+    t11FcSpSaTSelSpiInboundSpi     T11FcSpiIndex,
+    t11FcSpSaTSelSpiTrafSelIndex   Unsigned32,
+    t11FcSpSaTSelSpiDirection      T11FcSaDirection,
+    t11FcSpSaTSelSpiTrafSelPtr     Unsigned32
+}
+
+t11FcSpSaTSelSpiInboundSpi OBJECT-TYPE
+    SYNTAX       T11FcSpiIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An SPI value that identifies the ingress Security
+           Association of a particular SA pair."
+    ::= { t11FcSpSaTSelSpiEntry 1 }
+
+t11FcSpSaTSelSpiTrafSelIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that distinguishes between the
+           (potentially multiple) Traffic Selectors in use on
+           this Security Association pair."
+    ::= { t11FcSpSaTSelSpiEntry 2 }
+
+t11FcSpSaTSelSpiDirection OBJECT-TYPE
+    SYNTAX       T11FcSaDirection
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object indicates whether this Traffic Selector
+           is being used for ingress or for egress traffic."
+    ::= { t11FcSpSaTSelSpiEntry 3 }
+
+t11FcSpSaTSelSpiTrafSelPtr OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object contains a pointer into another table that
+           can be used to obtain more information about this Traffic
+           Selector.
+
+           If the corresponding instance of t11FcSpSaTSelSpiDirection
+           has the value 'egress', then this object contains the
+           value of t11FcSpSaTSelNegOutPrecedence in the row of
+           t11FcSpSaTSelNegOutTable, which contains more information.
+
+           If the corresponding instance of t11FcSpSaTSelSpiDirection
+           has the value 'ingress', then this object contains the
+           value of t11FcSpSaTSelNegInIndex that identifies the row
+           in t11FcSpSaTSelNegInTable containing more information."
+    ::= { t11FcSpSaTSelSpiEntry 4 }
+
+--
+-- Notification information & control
+--
+
+t11FcSpSaControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpSaControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of control and other information concerning
+           the generation of notifications for events related
+           to FC-SP Security Associations."
+    ::= { t11FcSpSaControl 1 }
+
+t11FcSpSaControlEntry OBJECT-TYPE
+    SYNTAX       T11FcSpSaControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry identifies information for the one or more
+
+           interfaces (identified by t11FcSpSaIfIndex) to a
+           particular Fabric (identified by t11FcSpSaIfFabricIndex),
+           and managed as part of the Fibre Channel management
+           instance identified by fcmInstanceIndex.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11FcSpSaIfStorageType that is INDEX-ed
+           by the same values of fcmInstanceIndex, t11FcSpSaIfIndex,
+           and t11FcSpSaIfFabricIndex."
+    INDEX  { fcmInstanceIndex, t11FcSpSaIfIndex,
+             t11FcSpSaIfFabricIndex }
+    ::= { t11FcSpSaControlTable 1 }
+
+T11FcSpSaControlEntry ::= SEQUENCE {
+    t11FcSpSaControlAuthFailEnable  TruthValue,
+    t11FcSpSaControlInboundSpi      T11FcSpiIndex,
+    t11FcSpSaControlSource          FcAddressIdOrZero,
+    t11FcSpSaControlDestination     FcAddressIdOrZero,
+    t11FcSpSaControlFrame           OCTET STRING,
+    t11FcSpSaControlElapsed         TimeTicks,
+    t11FcSpSaControlSuppressed      Gauge32,
+    t11FcSpSaControlWindow          Unsigned32,
+    t11FcSpSaControlMaxNotifs       Unsigned32,
+    t11FcSpSaControlLifeExcdEnable  TruthValue,
+    t11FcSpSaControlLifeExcdSpi     T11FcSpiIndex,
+    t11FcSpSaControlLifeExcdDir     T11FcSaDirection,
+    t11FcSpSaControlLifeExcdTime    TimeStamp
+}
+
+t11FcSpSaControlAuthFailEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether a t11FcSpSaNotifyAuthFailure
+           notification should be generated for the first occurrence
+           of an Authentication failure within a time window for this
+           Fabric."
+    ::= { t11FcSpSaControlEntry 1 }
+
+t11FcSpSaControlInboundSpi OBJECT-TYPE
+    SYNTAX       T11FcSpiIndex
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The SPI value of the ingress Security Association on
+           which was received the last frame for which a
+           t11FcSpSaNotifyAuthFailure was generated.
+
+           If no t11FcSpSaNotifyAuthFailure notifications have
+           been generated, the value of this object is zero."
+    ::= { t11FcSpSaControlEntry 2 }
+
+t11FcSpSaControlSource OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The S_ID contained in the last frame for which a
+           t11FcSpSaNotifyAuthFailure was generated.
+
+           If no t11FcSpSaNotifyAuthFailure notifications have
+           been generated, the value of this object is the
+           zero-length string."
+    ::= { t11FcSpSaControlEntry 3 }
+
+t11FcSpSaControlDestination OBJECT-TYPE
+    SYNTAX       FcAddressIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The D_ID contained in the last frame for which a
+           t11FcSpSaNotifyAuthFailure was generated.
+
+           If no t11FcSpSaNotifyAuthFailure notifications have
+           been generated, the value of this object is the
+           zero-length string."
+    ::= { t11FcSpSaControlEntry 4 }
+
+t11FcSpSaControlFrame OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..256))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The binary content of the last frame for which a
+           t11FcSpSaNotifyAuthFailure was generated.  If more than
+           256 bytes of the frame are available, then this object
+           contains the first 256 bytes.  If less than 256 bytes of
+           the frame are available, then this object contains the
+           first N bytes, where N is greater or equal to zero.
+
+           If no t11FcSpSaNotifyAuthFailure notifications have
+           been generated, the value of this object is the
+           zero-length string."
+    ::= { t11FcSpSaControlEntry 5 }
+
+t11FcSpSaControlElapsed OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The elapsed time since the last generation of a
+           t11FcSpSaNotifyAuthFailure notification on the same
+           Fabric, or the value of sysUpTime if no
+           t11FcSpSaNotifyAuthFailure notifications have been
+           generated since the last restart."
+    ::= { t11FcSpSaControlEntry 6 }
+
+t11FcSpSaControlSuppressed OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of occurrences of an Authentication failure
+           on a Fabric that were suppressed because they occurred
+           on the same Fabric within the same time window as a
+           previous Authentication failure for which a
+           t11FcSpSaNotifyAuthFailure notification was generated.
+
+           The value of this object is reset to zero on a restart
+           of the network management subsystem, and whenever a
+           t11FcSpSaNotifyAuthFailure notification is generated.
+           In the event that the value of this object reaches its
+           maximum value, it remains at that value until it is
+           reset on the generation of the next
+           t11FcSpSaNotifyAuthFailure notification."
+    ::= { t11FcSpSaControlEntry 7 }
+
+t11FcSpSaControlWindow OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    UNITS        "seconds"
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "The length of a time window that begins when a
+           t11FcSpSaNotifyAuthFailure notification is generated for
+           any Security Association on a particular Fabric.  For the
+           duration of the time window, further Authentication failures
+           occurring for the same Security Association are counted but
+           no t11FcSpSaNotifyAuthFailure notification is generated.
+
+           When this object is modified before the end of a time
+           window, that time window is immediately terminated, i.e.,
+           the next Authentication failure on the relevant Fabric
+           after the modification will cause a new time window to
+
+           begin with the new length."
+    DEFVAL   { 300 }
+    ::= { t11FcSpSaControlEntry 8 }
+
+t11FcSpSaControlMaxNotifs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "The maximum number of t11FcSpSaNotifyAuthFailure
+           notifications to be generated per Fabric within a
+           t11FcSpSaControlWindow time window.  Subsequent
+           Authentication failures occurring on the same Fabric
+           in the same time window are counted, but no
+           t11FcSpSaNotifyAuthFailure notification is generated.
+
+           When this object is modified before the end of a time
+           window, that time window is immediately terminated, i.e.,
+           the next Authentication failure on the relevant Fabric
+           after the modification will cause a new time window to
+           begin with the new length."
+    DEFVAL   { 16 }
+    ::= { t11FcSpSaControlEntry 9 }
+
+t11FcSpSaControlLifeExcdEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether t11FcSpSaNotifyLifeExceeded
+           notifications should be generated for this Fabric."
+    DEFVAL   { true }
+    ::= { t11FcSpSaControlEntry 10 }
+
+t11FcSpSaControlLifeExcdSpi OBJECT-TYPE
+    SYNTAX       T11FcSpiIndex
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The SPI of the SA that was most recently terminated
+           because its lifetime (in seconds or in passed bytes)
+           was exceeded.  Such terminations include those due to
+           a failed attempt to renew an SA after its lifetime was
+           exceeded."
+    ::= { t11FcSpSaControlEntry 11 }
+
+t11FcSpSaControlLifeExcdDir OBJECT-TYPE
+    SYNTAX       T11FcSaDirection
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The direction of frame transmission on the SA that was
+           most recently terminated because its lifetime (in seconds
+           or in passed bytes) was exceeded."
+    ::= { t11FcSpSaControlEntry 12 }
+
+t11FcSpSaControlLifeExcdTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The time of the most recent termination of an SA
+           due to its lifetime (in seconds or in passed bytes)
+           being exceeded.  Such terminations include those
+           due to a failed attempt to renew an SA after its
+           lifetime was exceeded."
+    ::= { t11FcSpSaControlEntry 13 }
+
+--
+-- Notification definitions
+--
+
+t11FcSpSaNotifyAuthFailure NOTIFICATION-TYPE
+    OBJECTS      { t11FcSpSaControlInboundSpi,
+                   t11FcSpSaControlSource,
+                   t11FcSpSaControlDestination,
+                   t11FcSpSaControlFrame,
+                   t11FcSpSaControlElapsed,
+                   t11FcSpSaControlSuppressed }
+    STATUS       current
+    DESCRIPTION
+           "When this notification is generated, it indicates the
+           occurrence of an Authentication failure for a received
+           FC-2 or CT_IU frame.  The t11FcSpSaControlInboundSpi,
+           t11FcSpSaControlSource, and t11FcSpSaControlDestination
+           objects in the varbindlist are the frame's SPI, source and
+           destination addresses, respectively.  t11FcSpSaControlFrame
+           provides the (beginning of the) frame's content if such is
+           available.
+
+           This notification is generated only for the first
+           occurrence of an Authentication failure on a Fabric within
+           a time window.  Subsequent occurrences of an Authentication
+           Failure on the same Fabric within the same time window
+           are counted but suppressed.
+
+           The value of t11FcSpSaControlElapsed contains (a lower bound
+           on) the elapsed time since the last generation of this
+           notification for the same Fabric.  The value of
+           t11FcSpSaControlSuppressed contains the number of
+           generations which were suppressed in the time window after
+           that last generation, or zero if unknown."
+    ::= { t11FcSpSaMIBNotifications 1 }
+
+t11FcSpSaNotifyLifeExceeded NOTIFICATION-TYPE
+    OBJECTS      { t11FcSpSaControlLifeExcdSpi,
+                   t11FcSpSaControlLifeExcdDir }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated when the lifetime (in
+           seconds or in passed bytes) of an SA is exceeded, and the
+           SA is either immediately terminated or is terminated
+           because an attempt to renew the SA fails.  The values of
+           t11FcSpSaControlLifeExcdSpi and t11FcSpSaControlLifeExcdDir
+           contain the SPI and direction of the terminated SA."
+    ::= { t11FcSpSaMIBNotifications 2 }
+
+--
+-- Conformance
+--
+
+t11FcSpSaMIBCompliances
+                    OBJECT IDENTIFIER ::= { t11FcSpSaMIBConformance 1 }
+t11FcSpSaMIBGroups  OBJECT IDENTIFIER ::= { t11FcSpSaMIBConformance 2 }
+
+t11FcSpSaMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+           "The compliance statement for entities that implement
+           FC-SP Security Associations."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS
+            { t11FcSpSaCapabilityGroup,
+              t11FcSpSaParamStatusGroup,
+              t11FcSpSaSummaryCountGroup,
+              t11FcSpSaProposalGroup,
+              t11FcSpSaDropBypassGroup,
+              t11FcSpSaActiveGroup,
+              t11FcSpSaNotifInfoGroup,
+              t11FcSpSaNotificationGroup
+            }
+
+       -- The following is an auxiliary (listed in an INDEX clause)
+
+       -- object for which the SMIv2 does not allow an OBJECT clause
+       -- to be specified, but for which this MIB has the following
+       -- compliance requirement:
+       --      OBJECT        t11FcSpSaIfIndex
+       --      DESCRIPTION
+       --          Compliance requires support for either one of:
+       --          - individual interfaces using ifIndex values, or
+       --          - the use of the zero value.
+
+-- Write access is not required for any objects in this MIB module:
+
+        OBJECT       t11FcSpSaIfStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTransStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaIfReplayPrevention
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaIfReplayWindowSize
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaIfTerminateAllSas
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaPropSecurityProt
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaPropTSelListIndex
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaPropTransListIndex
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaPropAcceptAlgorithm
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaPropRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropDirection
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropStartSrcAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropEndSrcAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropStartDstAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropEndDstAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropStartRCtl
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropEndRCtl
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropStartType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropEndType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelPropRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTransSecurityProt
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTransEncryptAlg
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTransEncryptKeyLen
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTransIntegrityAlg
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTransRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByAction
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByStartSrcAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByEndSrcAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByStartDstAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByEndDstAddr
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByStartRCtl
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByEndRCtl
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByStartType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByEndType
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaTSelDrByRowStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaPairTerminate
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaControlAuthFailEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaControlWindow
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaControlMaxNotifs
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+
+        OBJECT       t11FcSpSaControlLifeExcdEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION  "Write access is not required."
+    ::= { t11FcSpSaMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FcSpSaCapabilityGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpSaIfEspHeaderCapab,
+               t11FcSpSaIfCTAuthCapab,
+               t11FcSpSaIfIKEv2Capab,
+               t11FcSpSaIfIkev2AuthCapab
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information
+           related to capabilities of FC-SP entities."
+    ::= { t11FcSpSaMIBGroups 1 }
+
+t11FcSpSaParamStatusGroup OBJECT-GROUP
+
+    OBJECTS  { t11FcSpSaIfStorageType,
+               t11FcSpSaIfReplayPrevention,
+               t11FcSpSaIfReplayWindowSize,
+               t11FcSpSaIfDeadPeerDetections,
+               t11FcSpSaIfTerminateAllSas
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing parameters
+           and status information related to FC-SP entities."
+    ::= { t11FcSpSaMIBGroups 2 }
+
+t11FcSpSaSummaryCountGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpSaIfOutDrops,
+               t11FcSpSaIfOutBypasses,
+               t11FcSpSaIfOutProcesses,
+               t11FcSpSaIfOutUnMatcheds,
+               t11FcSpSaIfInUnprotUnmtchDrops,
+               t11FcSpSaIfInDetReplays,
+               t11FcSpSaIfInUnprotMtchDrops,
+               t11FcSpSaIfInBadXforms,
+               t11FcSpSaIfInGoodXforms,
+               t11FcSpSaIfInProtUnmtchs
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing summary
+           counters for FC-SP Security Associations."
+    ::= { t11FcSpSaMIBGroups 3 }
+
+t11FcSpSaProposalGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpSaPropSecurityProt,
+               t11FcSpSaPropTSelListIndex,
+               t11FcSpSaPropTransListIndex,
+               t11FcSpSaPropAcceptAlgorithm,
+               t11FcSpSaPropOutMatchSucceeds,
+               t11FcSpSaPropRowStatus,
+               t11FcSpSaTSelPropDirection,
+               t11FcSpSaTSelPropStartSrcAddr,
+               t11FcSpSaTSelPropEndSrcAddr,
+               t11FcSpSaTSelPropStartDstAddr,
+               t11FcSpSaTSelPropEndDstAddr,
+               t11FcSpSaTSelPropStartRCtl,
+               t11FcSpSaTSelPropEndRCtl,
+               t11FcSpSaTSelPropStartType,
+               t11FcSpSaTSelPropEndType,
+               t11FcSpSaTSelPropStorageType,
+               t11FcSpSaTSelPropRowStatus
+
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information
+           related to making and accepting proposals for
+           FC-SP Security Associations."
+    ::= { t11FcSpSaMIBGroups 4 }
+
+t11FcSpSaDropBypassGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpSaTSelDrByAction,
+               t11FcSpSaTSelDrByStartSrcAddr,
+               t11FcSpSaTSelDrByEndSrcAddr,
+               t11FcSpSaTSelDrByStartDstAddr,
+               t11FcSpSaTSelDrByEndDstAddr,
+               t11FcSpSaTSelDrByStartRCtl,
+               t11FcSpSaTSelDrByEndRCtl,
+               t11FcSpSaTSelDrByStartType,
+               t11FcSpSaTSelDrByEndType,
+               t11FcSpSaTSelDrByMatches,
+               t11FcSpSaTSelDrByRowStatus
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information
+           about Traffic Selectors of traffic to drop or bypass
+           for FC-SP Security."
+    ::= { t11FcSpSaMIBGroups 5 }
+
+t11FcSpSaActiveGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpSaPairSecurityProt,
+               t11FcSpSaPairTransListIndex,
+               t11FcSpSaPairTransIndex,
+               t11FcSpSaPairLifetimeLeft,
+               t11FcSpSaPairLifetimeLeftUnits,
+               t11FcSpSaPairTerminate,
+               t11FcSpSaPairInProtUnMatchs,
+               t11FcSpSaPairInDetReplays,
+               t11FcSpSaPairInBadXforms,
+               t11FcSpSaPairInGoodXforms,
+               t11FcSpSaTransSecurityProt,
+               t11FcSpSaTransEncryptAlg,
+               t11FcSpSaTransEncryptKeyLen,
+               t11FcSpSaTransIntegrityAlg,
+               t11FcSpSaTransStorageType,
+               t11FcSpSaTransRowStatus,
+               t11FcSpSaTSelNegInInboundSpi,
+               t11FcSpSaTSelNegInStartSrcAddr,
+               t11FcSpSaTSelNegInEndSrcAddr,
+               t11FcSpSaTSelNegInStartDstAddr,
+               t11FcSpSaTSelNegInEndDstAddr,
+               t11FcSpSaTSelNegInStartRCtl,
+               t11FcSpSaTSelNegInEndRCtl,
+               t11FcSpSaTSelNegInStartType,
+               t11FcSpSaTSelNegInEndType,
+               t11FcSpSaTSelNegInUnpMtchDrops,
+               t11FcSpSaTSelNegOutInboundSpi,
+               t11FcSpSaTSelNegOutStartSrcAddr,
+               t11FcSpSaTSelNegOutEndSrcAddr,
+               t11FcSpSaTSelNegOutStartDstAddr,
+               t11FcSpSaTSelNegOutEndDstAddr,
+               t11FcSpSaTSelNegOutStartRCtl,
+               t11FcSpSaTSelNegOutEndRCtl,
+               t11FcSpSaTSelNegOutStartType,
+               t11FcSpSaTSelNegOutEndType,
+               t11FcSpSaTSelSpiDirection,
+               t11FcSpSaTSelSpiTrafSelPtr
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information related
+           to currently active FC-SP Security Associations."
+    ::= { t11FcSpSaMIBGroups 6 }
+
+t11FcSpSaNotifInfoGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpSaControlAuthFailEnable,
+               t11FcSpSaControlInboundSpi,
+               t11FcSpSaControlSource,
+               t11FcSpSaControlDestination,
+               t11FcSpSaControlFrame,
+               t11FcSpSaControlElapsed,
+               t11FcSpSaControlSuppressed,
+               t11FcSpSaControlWindow,
+               t11FcSpSaControlMaxNotifs,
+               t11FcSpSaControlLifeExcdEnable,
+               t11FcSpSaControlLifeExcdSpi,
+               t11FcSpSaControlLifeExcdDir,
+               t11FcSpSaControlLifeExcdTime
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects containing information
+           related to notifications of events concerning
+           FC-SP Security Associations."
+    ::= { t11FcSpSaMIBGroups 7 }
+
+t11FcSpSaNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS  { t11FcSpSaNotifyAuthFailure,
+                     t11FcSpSaNotifyLifeExceeded
+                   }
+    STATUS         current
+    DESCRIPTION
+           "A collection of notifications of events concerning
+           FC-SP Security Associations."
+    ::= { t11FcSpSaMIBGroups 8 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-SP-TC-MIB.mib b/snmp_builder/mibs/T11-FC-SP-TC-MIB.mib
new file mode 100644
index 0000000..83f0f10
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-SP-TC-MIB.mib
@@ -0,0 +1,637 @@
+T11-FC-SP-TC-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, mib-2,
+    Unsigned32          FROM SNMPv2-SMI                  -- [RFC2578]
+    TEXTUAL-CONVENTION  FROM SNMPv2-TC;                  -- [RFC2579]
+
+t11FcTcMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200808200000Z"
+    ORGANIZATION  "This MIB module was developed through the
+                  coordinated effort of two organizations:
+                  T11 began the development and the IETF (in
+                  the IMSS Working Group) finished it."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+           "This MIB module defines Textual Conventions for use in
+           the multiple MIB modules, which together define the
+           instrumentation for an implementation of the Fibre Channel
+           Security Protocols (FC-SP) specification.
+
+           This MIB module also defines Object Identities (for use as
+           possible values of MIB objects with syntax AutonomousType),
+           including OIDs for the Cryptographic Algorithms defined
+           in FC-SP.
+
+           Copyright (C) The IETF Trust (2008).  This version
+           of this MIB module is part of RFC 5324;  see the RFC
+           itself for full legal notices."
+    REVISION  "200808200000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 5324."
+    ::= { mib-2 175 }
+
+t11FcSpIdentities OBJECT IDENTIFIER ::= { t11FcTcMIB 1 }
+t11FcSpAlgorithms OBJECT IDENTIFIER ::= { t11FcSpIdentities 1 }
+
+--
+-- Textual Conventions
+--
+
+T11FcSpPolicyHashFormat ::=  TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "Identifies a cryptographic hash function used to create
+           a hash value that summarizes an FC-SP Policy Object.
+
+           Each definition of an object with this TC as its syntax
+           must be accompanied by a corresponding definition of an
+           object with T11FcSpPolicyHashValue as its syntax, and
+           containing the hash value.
+
+           The first two cryptographic hash functions are:
+
+                Hash Type    Hash Tag     Hash Length (Bytes)
+                  SHA-1     '00000001'h        20
+                 SHA-256    '00000002'h        32
+           "
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3.1 and table 106.
+            - FIPS PUB 180-2."
+    SYNTAX        OCTET STRING (SIZE (4))
+
+T11FcSpPolicyHashValue ::=  TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "Represents the value of the cryptographic hash function
+           of an FC-SP Policy Object.
+
+           Each definition of an object with this TC as its syntax
+           must be accompanied by a corresponding definition of an
+           object with T11FcSpPolicyHashFormat as its syntax.
+           The corresponding object identifies the cryptographic
+           hash function used to create the hash value."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 7.1.3.1 and table 106."
+    SYNTAX        OCTET STRING (SIZE (0..64))
+
+T11FcSpHashCalculationStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+           "When some kind of 'database' is defined in a set of
+           read-write MIB objects, it is common that multiple changes
+           in the data need to be made at the same time.  So, if hash
+           values are maintained for that data, those hash values are
+           only correct if and when they are re-calculated after every
+           change.  In such circumstances, the use of an object with
+           this syntax allows the re-calculation of the hash values to
+           be deferred until all changes have been made, and therefore
+           the calculation need only be done once after all changes,
+           rather than repeatedly/after each individual change.
+
+           The definition of an object defined using this TC is
+           required to specify which one or more instances of which
+           MIB objects contain the hash values operated upon (or
+           whose status is given) by the value of this TC.
+
+           When read, the value of an object with this syntax is
+           either:
+
+             correct -- the identified MIB object instance(s)
+                        contain the correct hash values; or
+             stale   -- the identified MIB object instance(s)
+                        contain stale (possibly incorrect) values.
+
+           Writing a value of 'calculate' is a request to re-calculate
+           and update the values of the corresponding instances of the
+           identified MIB objects.  Writing a value of 'correct' or
+           'stale' to this object is an error (e.g., 'wrongValue')."
+    SYNTAX       INTEGER {
+                     calculate(1),
+                     correct(2),
+                     stale(3)
+                 }
+
+T11FcSpAuthRejectReasonCode ::=  TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A reason code contained in an AUTH_Reject message, or
+           in an SW_RJT (rejecting an AUTH_ILS), or in an LS_RJT
+           (rejecting an AUTH-ELS)."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 17, 48, 52."
+    SYNTAX        INTEGER {
+
+                      authFailure(1),
+                      logicalError(2),
+                      logicalBusy(3),
+                      authILSNotSupported(4),
+                      authELSNotSupported(5),
+                      notLoggedIn(6)
+                  }
+
+T11FcSpAuthRejReasonCodeExp ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A reason code explanation contained in an AUTH_Reject
+           message, or in an SW_RJT (rejecting an AUTH_ILS), or in
+           an LS_RJT (rejecting an AUTH-ELS)."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Tables 18, 48, 52."
+    SYNTAX        INTEGER {
+                      authMechanismNotUsable(1),
+                      dhGroupNotUsable(2),
+                      hashFunctionNotUsable(3),
+                      authTransactionAlreadyStarted(4),
+                      authenticationFailed(5),
+                      incorrectPayload(6),
+                      incorrectAuthProtocolMessage(7),
+                      restartAuthProtocol(8),
+                      authConcatNotSupported(9),
+                      unsupportedProtocolVersion(10),
+                      logicalBusy(11),
+                      authILSNotSupported(12),
+                      authELSNotSupported(13),
+                      notLoggedIn(14)
+                  }
+
+T11FcSpHashFunctions ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A set of zero, one, or more hash functions defined for
+           use in FC-SP."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 14."
+    SYNTAX        BITS {
+                      md5(0),
+                      sha1(1)
+                  }
+
+T11FcSpSignFunctions ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A set of zero, one, or more signature functions defined
+           for signing certificates for use with FCAP in FC-SP."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, tables 38 & 39."
+    SYNTAX        BITS {
+                      rsaSha1(0)
+                  }
+
+T11FcSpDhGroups ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A set of zero, one, or more DH Groups defined for use
+           in FC-SP."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 15."
+    SYNTAX        BITS {
+                      null(0),
+                      group1024(1),
+                      group1280(2),
+                      group1536(3),
+                      group2048(4),
+                      group3072(5),
+                      group4096(6),
+                      group6144(7),
+                      group8192(8)
+                  }
+
+T11FcSpPolicyObjectType ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A value that identifies the type of an FC-SP Policy
+           Object."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 102."
+    SYNTAX   INTEGER {
+                 summary(1),
+                 switchMemberList(2),
+                 nodeMemberList(3),
+                 switchConnectivity(4),
+                 ipMgmtList(5),
+                 attribute(6)
+             }
+
+T11FcSpPolicyNameType ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "The format and usage of a companion object having
+           T11FcSpPolicyName as its syntax.
+
+           Six of the values indicate the same format, i.e., they
+           differ only in semantics.  That common format is a Fibre
+           Channel 'Name_Identifier', i.e., the same syntax as
+           'FcNameIdOrZero (SIZE(8))'.
+
+           These six are three pairs of one restricted and one
+           unrestricted.  Each usage of this syntax must specify
+           what the meaning of 'restricted' is for that usage and
+           how the characteristics and behavior of restricted
+           names differ from unrestricted names.
+
+           The six are:
+
+             'nodeName'           - a Node_Name, which is the
+                                    Name_Identifier associated
+                                    with a Fibre Channel Node.
+
+             'restrictedNodeName' - a Restricted Node_Name.
+
+             'portName'           - the Name_Identifier associated
+                                    with a Fibre Channel Port.
+
+             'restrictedPortName' - a Restricted Port_Name.
+
+             'wildcard'           - a Wildcard value that is used to
+                                    identify 'all others' (typically,
+                                    all other members of a Policy
+                                    Object, not all other Policy
+                                    Objects).
+
+             'restrictedWildcard' - a Restricted Wildcard value.
+
+           Other possible values are:
+
+             'alphaNumericName'   - the value begins with an ASCII
+           letter (upper or lower case) followed by (0 ... 63)
+           characters from the set:  lower case letters, upper case
+           letters, digits, and the four symbols: dollar-sign ($),
+           dash (-), caret (^), and underscore (_).
+
+             'ipv6AddressRange'   - two IPv6 addresses in network
+           byte order, the numerically smallest first and the
+           numerically largest second; total length is 32 bytes.
+
+             'ipv4AddressRange'   - two IPv4 addresses in network
+           byte order, the numerically smallest first and the
+           numerically largest second; total length is 8 bytes."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 103."
+    SYNTAX   INTEGER {
+                 nodeName(1),
+                 restrictedNodeName(2),
+                 portName(3),
+                 restrictedPortName(4),
+                 wildcard(5),
+                 restrictedWildcard(6),
+                 alphaNumericName(7),
+                 ipv6AddressRange(8),
+                 ipv4AddressRange(9)
+             }
+
+T11FcSpPolicyName ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A syntax used, when defining Policy Objects, for the
+           name of something.
+
+           An object that uses this syntax always identifies a
+           companion object with syntax T11FcSpPolicyNameType
+           such that the companion object specifies the format
+           and usage of the object with this syntax.
+
+           When the companion object has the value 'wildcard' or
+           'restrictedWildcard', the value of the T11FcSpPolicyName
+           object is:  '0000000000000000'h."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 103."
+    SYNTAX   OCTET STRING (SIZE (1..64))
+
+T11FcSpAlphaNumName ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A syntax used when defining Policy Objects for the
+           name of something, where the name is always in the format
+           specified by:
+
+               T11FcSpPolicyNameType = 'alphaNumericName'
+           "
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 103."
+    SYNTAX   OCTET STRING (SIZE (1..64))
+
+T11FcSpAlphaNumNameOrAbsent ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "An extension of the T11FcSpAlphaNumName TC with
+           one additional possible value: the zero-length string
+           to indicate the absence of a name."
+    SYNTAX   OCTET STRING (SIZE (0..64))
+
+T11FcSaDirection ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "The direction of frame transmission on a Security
+           Association.  Note that Security Associations are
+           unidirectional, but they always exist as part of an
+           SA pair of the same type in opposite directions."
+    SYNTAX   INTEGER { ingress(1), egress(2) }
+
+T11FcSpiIndex ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "An SPI (Security Parameter Index) value is carried in the
+           SPI field of a frame protected by the ESP_Header.  An SPI
+           is also carried in the SAID field of a Common Transport
+           Information Unit (CT_IU) protected by CT_Authentication.
+           An SPI value identifies the Security Association on which
+           the frame is being transmitted."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 4.7.2 and 4.7.3."
+    SYNTAX   Unsigned32 (0..4294967295) -- the default range!!
+
+T11FcSpPrecedence ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+           "The precedence of a Traffic Selector.  If a frame
+           matches with two or more Traffic Selectors, then the match
+           that takes precedence is the one with the Traffic Selector
+           having the numerically smallest precedence value.  Note that
+           precedence values are not necessarily contiguous."
+    SYNTAX   Unsigned32 (0..4294967295)  -- the default range!!
+
+T11FcRoutingControl ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x"
+    STATUS        current
+    DESCRIPTION
+           "A value stored in the R_CTL (Routing Control) 8-bit field
+           of an FC-2 frame containing routing and information bits to
+           categorize the frame function.
+
+           For FC-2 frames, an R_CTL value typically distinguishes
+           between control versus data frames and/or solicited versus
+           unsolicited frames, and in combination with the TYPE field
+           (see T11FcSpType), identifies a particular link-layer
+           service/protocol using FC-2.
+
+           For CT_Authentication, the information field in the R_CTL
+           field contains '02'h for Request CT_IUs and '03'h for
+           Response CT_IUs.
+
+           The comparison of two values having this syntax is done
+           by treating each string as an 8-bit numeric value."
+    REFERENCE
+           "- Fibre Channel - Framing and Signaling-2 (FC-FS-2),
+              ANSI INCITS 424-2007, Project T11/1619-D,
+              February 2007, section 9.3.
+            - Fibre Channel - Generic Services-5 (FC-GS-5),
+              ANSI INCITS 427-2006, sections 4.5.2.4.2, 4.5.2.4.3
+              and table 12."
+    SYNTAX   OCTET STRING (SIZE(1))
+
+T11FcSpType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2x"
+    STATUS        current
+    DESCRIPTION
+           "A value, or combination of values, contained in a frame
+           header used in identifying the link layer service/protocol
+           of a frame.  The value is always two octets:
+
+             - for FC-2 frames, the first octet is zero and the second
+               octet contains the Data structure type (TYPE) value
+               defined by FC-FS-2.  The TYPE value is used in
+               combination with T11FcRoutingControl to identify a link
+
+               layer service/protocol.
+
+             - for Common Transport Information Units (CT_IUs), the
+               first octet contains a GS_Type value and the second
+               octet contains a GS_Subtype value, defined by FC-GS-5.
+
+           The comparison of two values having this syntax is done
+           by treating each string as the numeric value obtained by
+           numerically combining the individual octet's value as
+           follows:
+
+               (256 * 1st-octet) + 2nd-octet
+           "
+    REFERENCE
+           "- Fibre Channel - Framing and Signaling-2 (FC-FS-2),
+              ANSI INCITS 424-2007, Project T11/1619-D,
+              February 2007, section 9.6.
+            - Fibre Channel - Generic Services-5 (FC-GS-5),
+              ANSI INCITS 427-2006, sections 4.3.2.4 and 4.3.2.5."
+    SYNTAX   OCTET STRING (SIZE(2))
+
+T11FcSpTransforms ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "A list of the standardized transforms that are defined
+           by FC-SP for use with ESP_Header, CT_Authentication, and/or
+           IKEv2 Support."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP), February 2007,
+              Appendix A.3.1, tables A.23, A.24, A.25, A.26."
+    SYNTAX       BITS {
+                     encrNull(0),
+                     encrAesCbc(1),
+                     encrAesCtr(2),
+                     encrAesGcm(3),
+                     encr3Des(4),
+                     prfHmacMd5(5),
+                     prfHmacSha1(6),
+                     prfAesCbc(7),
+                     authHmacMd5L96(8),
+                     authHmacSha1L96(9),
+                     authHmacMd5L128(10),
+                     authHmacSha1L160(11),
+                     encrNullAuthAesGmac(12),
+                     dhGroups1024bit(13),
+                     dhGroups2048bit(14)
+                 }
+
+T11FcSpSecurityProtocolId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+           "A Security Protocol identifier to identify
+           the protocol by which traffic is to be protected,
+           e.g., ESP_Header or CT_Authentication."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, section 6.3.2.2 and table 67."
+    SYNTAX       INTEGER { espHeader(1), ctAuth(2) }
+
+T11FcSpLifetimeLeft ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+           "This TC is used for one object of an associated pair
+           of objects.  The object with this syntax specifies a
+           remaining lifetime of something, e.g., of an SA, where
+           the lifetime is given in the units specified by the other
+           object of the pair which has T11FcSpLifetimeLeftUnits
+           as its syntax."
+    SYNTAX       Unsigned32
+
+T11FcSpLifetimeLeftUnits ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+           "An object, defined using T11FcSpLifetimeLeft TC as
+           its syntax, is required to be one of an associated
+           pair of objects such that the other object of the pair
+           is defined with this T11FcSpLifetimeLeftUnits TC as
+           its syntax and with its value specifying the
+           units of the remaining lifetime given by the
+           value of the T11FcSpLifetimeLeft object."
+    SYNTAX       INTEGER {
+                     seconds(1),      -- seconds
+                     kiloBytes(2),    -- 10^^3 bytes
+                     megaBytes(3),    -- 10^^6 bytes
+                     gigaBytes(4),    -- 10^^9 bytes
+                     teraBytes(5),    -- 10^^12 bytes
+                     petaBytes(6),    -- 10^^15 bytes
+                     exaBytes(7),     -- 10^^18 bytes
+                     zettaBytes(8),   -- 10^^21 bytes
+                     yottaBytes(9)    -- 10^^24 bytes
+                 }
+
+--
+-- Object Identities to identify the Cryptographic Algorithms
+-- listed in FC-SP.
+
+--
+
+t11FcSpEncryptAlgorithms
+     OBJECT IDENTIFIER ::= { t11FcSpAlgorithms 1 }
+
+t11FcSpEncrNull OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The ENCR_NULL algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 70."
+    ::= { t11FcSpEncryptAlgorithms 1 }
+
+t11FcSpEncrAesCbc OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The ENCR_AES_CBC algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 70."
+    ::= { t11FcSpEncryptAlgorithms 2 }
+
+t11FcSpEncrAesCtr OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The ENCR_AES_CTR algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 70."
+    ::= { t11FcSpEncryptAlgorithms 3 }
+
+t11FcSpEncrAesGcm OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The ENCR_AES_GCM algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 70."
+    ::= { t11FcSpEncryptAlgorithms 4 }
+
+t11FcSpEncr3Des OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The ENCR_3DES algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 70."
+    ::= { t11FcSpEncryptAlgorithms 5 }
+
+t11FcSpAuthAlgorithms
+     OBJECT IDENTIFIER ::= { t11FcSpAlgorithms 2 }
+
+t11FcSpAuthNull OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The AUTH_NONE algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 72."
+    ::= { t11FcSpAuthAlgorithms 1 }
+
+t11FcSpAuthHmacMd5L96 OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The AUTH_HMAC_MD5_96 algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 72."
+    ::= { t11FcSpAuthAlgorithms 2 }
+
+t11FcSpAuthHmacSha1L96 OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The AUTH_HMAC_SHA1_96 algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 72."
+    ::= { t11FcSpAuthAlgorithms 3 }
+
+t11FcSpAuthHmacMd5L128 OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The AUTH_HMAC_MD5_128 algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 72."
+    ::= { t11FcSpAuthAlgorithms 4 }
+
+t11FcSpAuthHmacSha1L160 OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The AUTH_HMAC_SHA1_160 algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 72."
+    ::= { t11FcSpAuthAlgorithms 5 }
+
+t11FcSpEncrNullAuthAesGmac OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION "The ENCR_NULL_AUTH_AES_GMAC algorithm."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 70."
+    ::= { t11FcSpEncryptAlgorithms 6 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-SP-ZONING-MIB.mib b/snmp_builder/mibs/T11-FC-SP-ZONING-MIB.mib
new file mode 100644
index 0000000..c9b494a
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-SP-ZONING-MIB.mib
@@ -0,0 +1,550 @@
+T11-FC-SP-ZONING-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, mib-2,
+    Counter32
+                        FROM SNMPv2-SMI                -- [RFC2578]
+    TruthValue          FROM SNMPv2-TC                 -- [RFC2579]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+                        FROM SNMPv2-CONF               -- [RFC2580]
+    ifIndex             FROM IF-MIB                    -- [RFC2863]
+    t11ZsServerEntry,
+    t11ZsStatsEntry,
+    t11ZsNotifyControlEntry,
+    t11ZsFabricIndex    FROM T11-FC-ZONE-SERVER-MIB    -- [RFC4936]
+    T11FcSpPolicyHashValue,
+    T11FcSpPolicyHashFormat,
+    T11FcSpHashCalculationStatus
+                        FROM T11-FC-SP-TC-MIB;
+
+t11FcSpZoningMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200808200000Z"
+
+    ORGANIZATION  "This MIB module was developed through the
+                  coordinated effort of two organizations:
+                  T11 began the development and the IETF (in
+                  the IMSS Working Group) finished it."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Email: kzm@cisco.com"
+    DESCRIPTION
+           "This MIB module specifies the extensions to the
+           T11-FC-ZONE-SERVER-MIB module that are necessary for the
+           management of Fibre Channel's FC-SP Zoning Servers, as
+           defined in the FC-SP specification.
+
+           The persistence of values written to these MIB objects is
+           the same as the persistence of the objects they extend,
+           i.e., it is given by the value of the relevant instance of
+           t11ZsServerDatabaseStorageType (defined in the
+           T11-FC-ZONE-SERVER-MIB module).
+
+           Copyright (C) The IETF Trust (2008).  This version
+           of this MIB module is part of RFC 5324;  see the RFC
+           itself for full legal notices."
+    REVISION  "200808200000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 5324."
+    ::= { mib-2 177 }
+
+t11FcSpZsMIBNotifications  OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 0 }
+t11FcSpZsMIBObjects        OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 1 }
+t11FcSpZsMIBConformance    OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 2 }
+t11FcSpZsConfiguration  OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 1 }
+t11FcSpZsStatistics     OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 2 }
+
+--
+-- Augmenting the table of Zone Servers
+--
+
+t11FcSpZsServerTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpZsServerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table which provides FC-SP-specific information about
+           the Zone Servers on each Fabric in one or more Switches."
+    ::= { t11FcSpZsConfiguration 1 }
+
+t11FcSpZsServerEntry OBJECT-TYPE
+    SYNTAX       T11FcSpZsServerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information relevant to FC-SP
+           for a particular Zone Server for a particular Fabric
+           on a particular Switch.  The Fabric and Switch are
+           identified in the same manner as in t11ZsServerEntry."
+    AUGMENTS   { t11ZsServerEntry }
+    ::= { t11FcSpZsServerTable 1 }
+
+T11FcSpZsServerEntry ::= SEQUENCE {
+    t11FcSpZsServerCapabilityObject      BITS,
+    t11FcSpZsServerEnabled               TruthValue,
+    t11FcSpZoneSetHashStatus             T11FcSpHashCalculationStatus,
+    t11FcSpActiveZoneSetHashType         T11FcSpPolicyHashFormat,
+    t11FcSpActiveZoneSetHash             T11FcSpPolicyHashValue,
+    t11FcSpZoneSetDatabaseHashType       T11FcSpPolicyHashFormat,
+    t11FcSpZoneSetDatabaseHash           T11FcSpPolicyHashValue
+}
+
+t11FcSpZsServerCapabilityObject OBJECT-TYPE
+    SYNTAX       BITS {
+                     fcSpZoning(0)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "Capabilities of the Zone Server for the particular Fabric
+           on the particular Switch, with respect to FC-SP Zoning:
+
+               fcSpZoning -- set to 1 to indicate the Switch is
+                             capable of supporting FC-SP Zoning.
+           "
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 184."
+    ::= { t11FcSpZsServerEntry 1 }
+
+t11FcSpZsServerEnabled OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object indicates whether the Zone Server for the
+           particular Fabric on the particular Switch, is operating in
+           FC-SP Zoning mode."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 185."
+    ::= { t11FcSpZsServerEntry 2 }
+
+t11FcSpZoneSetHashStatus OBJECT-TYPE
+    SYNTAX       T11FcSpHashCalculationStatus
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "When read, the value of this object is either:
+
+             correct -- the corresponding instances of both
+                        t11FcSpActiveZoneSetHash and
+                        t11FcSpZoneSetDatabaseHash contain
+                        the correct hash values; or
+             stale   -- the corresponding instances of
+                        t11FcSpActiveZoneSetHash and
+                        t11FcSpZoneSetDatabaseHash contain
+                        stale (possibly incorrect) values;
+
+           Writing a value of 'calculate' is a request to re-calculate
+           and update the values of the corresponding instances of both
+           t11FcSpActiveZoneSetHash and t11FcSpZoneSetDatabaseHash.
+           Writing a value of 'correct' or 'stale' to this object
+           is an error (e.g., 'wrongValue').
+
+           When the Active Zone Set and/or the Zone Set Database are
+           updated, it is common that multiple changes need to be made
+           at the same time.  In such circumstances, the use of this
+           object allows the hash values to be updated only once after
+           all changes, rather than repeatedly/after each individual
+           change.
+
+           If and when the corresponding instance of
+           t11ZsServerDatabaseStorageType has the value 'permanent(4)',
+           then if write access is supported to any instance of a
+           read-write object in any row of any table governed by the
+           'permanent' value of t11ZsServerDatabaseStorageType, then
+
+           write access to the corresponding instance of this object
+           must also be supported."
+    REFERENCE
+           "t11ZsServerDatabaseStorageType in
+           'Fibre Channel Zone Server MIB', RFC 4936, August 2007."
+    DEFVAL      { stale }
+    ::= { t11FcSpZsServerEntry 3 }
+
+t11FcSpActiveZoneSetHashType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashFormat
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The format used for the hash value contained in the
+           corresponding instance of t11FcSpActiveZoneSetHash."
+    ::= { t11FcSpZsServerEntry 4 }
+
+t11FcSpActiveZoneSetHash OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of the hash for the current Active Zone Set.
+            The format of this value is given by the corresponding
+            instance of t11FcSpActiveZoneSetHashType."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 187."
+    ::= { t11FcSpZsServerEntry 5 }
+
+t11FcSpZoneSetDatabaseHashType OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashFormat
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The format used for the hash value contained in the
+           corresponding instance of t11FcSpZoneSetDatabaseHash."
+    ::= { t11FcSpZsServerEntry 6 }
+
+t11FcSpZoneSetDatabaseHash OBJECT-TYPE
+    SYNTAX       T11FcSpPolicyHashValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of the hash for the current Zone Set Database.
+            The format of this value is given by the corresponding
+            instance of t11FcSpZoneSetDatabaseHashType."
+    REFERENCE
+           "- ANSI INCITS 426-2007, T11/Project 1570-D,
+              Fibre Channel - Security Protocols (FC-SP),
+              February 2007, Table 187."
+    ::= { t11FcSpZsServerEntry 7 }
+
+--
+-- Additional Statistics for FC-SP Zoning
+--
+
+t11FcSpZsStatsTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpZsStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of statistics specific to FC-SP that are
+           maintained by Zone Servers."
+    ::= { t11FcSpZsStatistics 1 }
+
+t11FcSpZsStatsEntry OBJECT-TYPE
+    SYNTAX       T11FcSpZsStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A set of statistics specific to FC-SP for a particular
+           Zone Server for a particular Fabric on a particular Switch.
+           The Fabric and Switch are identified in the same manner as
+           in t11ZsStatsEntry."
+    AUGMENTS   { t11ZsStatsEntry }
+    ::= { t11FcSpZsStatsTable 1 }
+
+T11FcSpZsStatsEntry ::= SEQUENCE {
+    t11FcSpZsSPCMITrequestsSent       Counter32,
+    t11FcSpZsSPCMITrequestsAccepted   Counter32,
+    t11FcSpZsSPCMITrequestsRejected   Counter32,
+    t11FcSpZsZcpRequestsSent          Counter32,
+    t11FcSpZsZcpRequestsAccepted      Counter32,
+    t11FcSpZsZcpRequestsRejected      Counter32,
+    t11FcSpZsZirRequestsAccepted      Counter32,
+    t11FcSpZsZirRequestsRejected      Counter32
+}
+
+t11FcSpZsSPCMITrequestsSent OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of SP Commit Zone Changes (SPCMIT) operation
+
+           requests sent by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 1 }
+
+t11FcSpZsSPCMITrequestsAccepted OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of SP Commit Zone Changes (SPCMIT) operation
+           requests received and accepted by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 2 }
+
+t11FcSpZsSPCMITrequestsRejected OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of SP Commit Zone Changes (SPCMIT) operation
+           requests received but rejected by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 3 }
+
+t11FcSpZsZcpRequestsSent OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zoning Check Protocol (ZCP) requests sent
+           by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 4 }
+
+t11FcSpZsZcpRequestsAccepted OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zoning Check Protocol (ZCP) requests received
+
+           and accepted by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 5 }
+
+t11FcSpZsZcpRequestsRejected OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zoning Check Protocol (ZCP) requests received
+           but rejected by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 6 }
+
+t11FcSpZsZirRequestsAccepted OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zoning Information Request (ZIR) requests
+           received and accepted by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 7 }
+
+t11FcSpZsZirRequestsRejected OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zoning Information Request (ZIR) requests
+           received but rejected by the Zone Server.
+
+           This counter has no discontinuities other than those
+           that all Counter32's have when sysUpTime=0."
+    ::= { t11FcSpZsStatsEntry 8 }
+
+--
+--  Enable/Disable for Notifications
+--
+
+t11FcSpZsNotifyControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11FcSpZsNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of control information for notifications
+           generated due to Zone Server events related to
+           FC-SP Zoning."
+    ::= { t11FcSpZsConfiguration 2 }
+
+t11FcSpZsNotifyControlEntry OBJECT-TYPE
+    SYNTAX       T11FcSpZsNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry is an augmentation of the notification control
+           information for a Zone Server for a particular Fabric on a
+           particular Switch.  The Fabric and Switch are identified in
+           the same manner as in t11ZsNotifyControlEntry."
+    AUGMENTS   { t11ZsNotifyControlEntry }
+    ::= { t11FcSpZsNotifyControlTable 1 }
+
+T11FcSpZsNotifyControlEntry ::= SEQUENCE {
+     t11FcSpZsNotifyJoinSuccessEnable    TruthValue,
+     t11FcSpZsNotifyJoinFailureEnable    TruthValue
+}
+
+t11FcSpZsNotifyJoinSuccessEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether
+           t11FcSpZsFabricJoinFailureNotify notifications should be
+           generated by the Zone Server for this Fabric."
+    ::= { t11FcSpZsNotifyControlEntry 1 }
+
+t11FcSpZsNotifyJoinFailureEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether
+           t11FcSpZsFabricJoinSuccessNotify notifications should be
+           generated by the Zone Server for this Fabric."
+    ::= { t11FcSpZsNotifyControlEntry 2 }
+
+--
+-- Notifications
+--
+
+t11FcSpZsFabricJoinSuccessNotify NOTIFICATION-TYPE
+    OBJECTS      { ifIndex, t11ZsFabricIndex }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that a Switch that is part
+           of one Fabric (indicated by the value of t11ZsFabricIndex)
+           has successfully joined (on the interface indicated by the
+           value of ifIndex) with a Switch that is part of another
+           Fabric.
+
+           If multiple Virtual Fabrics are configured on an interface,
+           and all are successfully joined at the same time, and if
+           the agent so chooses, then it can generate just one
+           notification in which t11ZsFabricIndex has the value 4096."
+    ::= { t11FcSpZsMIBNotifications 1 }
+
+t11FcSpZsFabricJoinFailureNotify NOTIFICATION-TYPE
+    OBJECTS      { ifIndex, t11ZsFabricIndex }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that an E_Port on the local
+           Switch has entered the Isolated state because a join
+           between two Fabrics failed.  The failure occurred on the
+           local Fabric indicated by the value of t11ZsFabricIndex,
+           on the interface indicated by the value of ifIndex.
+
+           If multiple Virtual Fabrics are configured on an interface,
+           and all have a failure to join at the same time, and if the
+           agent so chooses, then it can generate just one notification
+           in which t11ZsFabricIndex has the value 4096."
+    ::= { t11FcSpZsMIBNotifications 2 }
+
+--
+-- Conformance
+--
+
+t11FcSpZsMIBCompliances
+                    OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 1 }
+t11FcSpZsMIBGroups  OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 2 }
+
+t11FcSpZsMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+           "The compliance statement for entities that
+           implement the extensions specified in FC-SP for
+           Fibre Channel's Zone Server."
+
+    MODULE  -- this module
+
+        MANDATORY-GROUPS { t11FcSpZsObjectsGroup,
+                           t11FcSpZsNotificationControlGroup,
+                           t11FcSpZsNotificationGroup }
+
+        GROUP        t11FcSpZsStatisticsGroup
+        DESCRIPTION
+            "These counters, containing Zone Server statistics,
+            are mandatory only for those systems that count
+            such events."
+
+-- Write access is not required for any objects in this MIB module:
+
+        OBJECT       t11FcSpZsServerEnabled
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpZoneSetHashStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpZsNotifyJoinSuccessEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       t11FcSpZsNotifyJoinFailureEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { t11FcSpZsMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11FcSpZsObjectsGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpZsServerCapabilityObject,
+               t11FcSpZsServerEnabled,
+               t11FcSpZoneSetHashStatus,
+               t11FcSpActiveZoneSetHashType,
+               t11FcSpActiveZoneSetHash,
+               t11FcSpZoneSetDatabaseHashType,
+               t11FcSpZoneSetDatabaseHash
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for Zone configuration
+
+           information of a Zone Server capable of
+           operating in FC-SP Zoning mode."
+    ::= { t11FcSpZsMIBGroups 1 }
+
+t11FcSpZsNotificationControlGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpZsNotifyJoinSuccessEnable,
+               t11FcSpZsNotifyJoinFailureEnable
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of notification control objects for
+           monitoring Zone Server failures specific to FC-SP."
+    ::= { t11FcSpZsMIBGroups 2 }
+
+t11FcSpZsStatisticsGroup OBJECT-GROUP
+    OBJECTS  { t11FcSpZsSPCMITrequestsSent,
+               t11FcSpZsSPCMITrequestsAccepted,
+               t11FcSpZsSPCMITrequestsRejected,
+               t11FcSpZsZcpRequestsSent,
+               t11FcSpZsZcpRequestsAccepted,
+               t11FcSpZsZcpRequestsRejected,
+               t11FcSpZsZirRequestsAccepted,
+               t11FcSpZsZirRequestsRejected
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for collecting Zone Server
+            statistics which are specific to FC-SP."
+    ::= { t11FcSpZsMIBGroups 3 }
+
+t11FcSpZsNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { t11FcSpZsFabricJoinSuccessNotify,
+                    t11FcSpZsFabricJoinFailureNotify
+                  }
+    STATUS        current
+    DESCRIPTION
+           "A collection of notification(s) for monitoring
+           Zone Server events that are specific to FC-SP."
+    ::= { t11FcSpZsMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-VIRTUAL-FABRIC-MIB.mib b/snmp_builder/mibs/T11-FC-VIRTUAL-FABRIC-MIB.mib
new file mode 100644
index 0000000..a008cca
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-VIRTUAL-FABRIC-MIB.mib
@@ -0,0 +1,523 @@
+T11-FC-VIRTUAL-FABRIC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, mib-2
+                            FROM SNMPv2-SMI         -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP
+                            FROM SNMPv2-CONF        -- [RFC2580]
+    RowStatus, StorageType  FROM SNMPv2-TC          -- [RFC2579]
+    InterfaceIndex          FROM IF-MIB             -- [RFC2863]
+    fcmInstanceIndex, FcNameIdOrZero,
+    fcmPortEntry, fcmSwitchEntry
+                            FROM FC-MGMT-MIB        -- [RFC4044]
+    T11FabricIndex          FROM T11-TC-MIB;        -- [RFC4439]
+
+t11FcVirtualFabricMIB  MODULE-IDENTITY
+    LAST-UPDATED    "200611100000Z"
+    ORGANIZATION    "IETF IMSS (Internet and Management Support
+                     for Storage) Working Group"
+    CONTACT-INFO
+            "
+                     Scott Kipp
+                     McDATA Corporation
+                Tel: +1 720 558-3452
+             E-mail: scott.kipp@mcdata.com
+             Postal: 4 McDATA Parkway
+                     Broomfield, CO USA 80021
+
+                     G D Ramkumar
+                     SnapTell, Inc.
+                Tel: +1 650-326-7627
+             E-mail: gramkumar@stanfordalumni.org
+             Postal: 2741 Middlefield Rd, Suite 200
+                     Palo Alto, CA USA 94306
+
+                     Keith McCloghrie
+                     Cisco Systems, Inc.
+                Tel: +1 408 526-5260
+             E-mail: kzm@cisco.com
+             Postal: 170 West Tasman Drive
+                     San Jose, CA USA 95134
+            "
+    DESCRIPTION
+        "This module defines management information specific to
+         Fibre Channel Virtual Fabrics.  A Virtual Fabric is a
+
+         Fabric composed of partitions of switches, links and
+         N_Ports with a single Fabric management domain, Fabric
+         Services and independence from other Virtual Fabrics.
+
+         Copyright (C) The IETF Trust (2006).  This version of
+         this MIB module is part of RFC 4747; see the RFC itself for
+         full legal notices."
+    REVISION        "200611100000Z"
+    DESCRIPTION
+        "Initial version of this MIB module, published as RFC 4747."
+    ::= { mib-2 147 }
+
+t11vfObjects       OBJECT IDENTIFIER ::= { t11FcVirtualFabricMIB 1 }
+t11vfConformance   OBJECT IDENTIFIER ::= { t11FcVirtualFabricMIB 2 }
+
+--********************************
+--  MIB object definitions
+--
+
+t11vfCoreSwitchTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11vfCoreSwitchEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of core switches supported by the current
+         management entity."
+    ::= { t11vfObjects 1 }
+
+t11vfCoreSwitchEntry OBJECT-TYPE
+    SYNTAX      T11vfCoreSwitchEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each entry represents one core switch."
+    INDEX   { fcmInstanceIndex, t11vfCoreSwitchSwitchName }
+    ::= { t11vfCoreSwitchTable 1}
+
+T11vfCoreSwitchEntry ::=
+    SEQUENCE {
+       t11vfCoreSwitchSwitchName   FcNameIdOrZero,
+       t11vfCoreSwitchMaxSupported Unsigned32,
+      t11vfCoreSwitchStorageType  StorageType
+    }
+
+t11vfCoreSwitchSwitchName OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero (SIZE(8 | 16))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The Core Switch_Name (WWN) of this Core Switch."
+    ::= { t11vfCoreSwitchEntry 1 }
+
+t11vfCoreSwitchMaxSupported OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4095)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "In switches that do not support Virtual Fabrics,
+         this object has the value of 1.  If Virtual Fabrics
+         are supported, this object is the maximum number of
+         Virtual Fabrics supported by the Core Switch.  For
+         the purpose of this count, the Control VF_ID is
+         ignored."
+    ::= { t11vfCoreSwitchEntry 2 }
+
+t11vfCoreSwitchStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { t11vfCoreSwitchEntry 3 }
+
+-- Virtual Switch table
+
+t11vfVirtualSwitchTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11vfVirtualSwitchEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Virtual Switches.  When one Core Switch
+         provides switching functions for multiple Virtual Fabrics,
+         that Core Switch is modeled as containing multiple
+         Virtual Switches, one for each Virtual Fabric.  This table
+         contains one row for every Virtual Switch on every Core
+         Switch.  This table augments the basic switch information in
+         the fcmSwitchTable Table in the FC-MGMT-MIB."
+    REFERENCE
+        "fcmSwitchTable is defined in the FC-MGMT-MIB [RFC4044]."
+    ::= { t11vfObjects 2 }
+
+t11vfVirtualSwitchEntry OBJECT-TYPE
+    SYNTAX      T11vfVirtualSwitchEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry of the Virtual Switch table.  Each row is for a
+         Virtual Switch.
+
+         This table augments the fcmSwitchTable, i.e., every entry
+         in this table has a one-to-one correspondence with an
+         entry in the fcmSwitchTable.  At the time when the
+         fcmSwitchTable was defined, it applied to physical
+         switches.  With the definition and usage of virtual
+         switches, fcmSwitchTable now applies to virtual switches
+         as well as physical switches, and (in contrast to physical
+         switches) it is appropriate to provide the capability for
+         virtual switches to be created via remote management
+         applications, e.g., via SNMP.
+
+         So, this entry contains a RowStatus object (to allow the
+         creation of a virtual switch), as well as a StorageType
+         object.  Obviously, if a row is created/deleted in this
+         table, the corresponding row in the fcmSwitchTable will
+         be created/deleted."
+    REFERENCE
+        "fcmSwitchEntry is defined in the FC-MGMT-MIB module
+         [RFC4044]."
+    AUGMENTS   { fcmSwitchEntry }
+    ::= { t11vfVirtualSwitchTable 1}
+
+T11vfVirtualSwitchEntry ::=
+    SEQUENCE {
+        t11vfVirtualSwitchVfId               T11FabricIndex,
+        t11vfVirtualSwitchCoreSwitchName     FcNameIdOrZero,
+        t11vfVirtualSwitchRowStatus          RowStatus,
+        t11vfVirtualSwitchStorageType       StorageType
+    }
+
+t11vfVirtualSwitchVfId OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The VF_ID of the Virtual Fabric for which this virtual
+         switch performs its switching function.  The Control
+         VF_ID is implicitly enabled and is not set.
+         Communication with the Control VF_ID is required."
+    REFERENCE
+        "FC-SW-4, REV 7.5, section 12.2"
+    ::= { t11vfVirtualSwitchEntry 1 }
+
+t11vfVirtualSwitchCoreSwitchName OBJECT-TYPE
+    SYNTAX      FcNameIdOrZero (SIZE(8 | 16))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Core Switch_Name (WWN) of the Core Switch that
+         contains this Virtual Switch."
+    REFERENCE
+        "FC-SW-4, REV 7.5, section 12.2."
+    ::= { t11vfVirtualSwitchEntry 2 }
+
+t11vfVirtualSwitchRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The status of this row."
+        ::= { t11vfVirtualSwitchEntry 3 }
+
+t11vfVirtualSwitchStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { t11vfVirtualSwitchEntry 4 }
+
+-- Port table
+
+t11vfPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11vfPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Port attributes related to Virtual Fabrics."
+    ::= { t11vfObjects 3 }
+
+t11vfPortEntry OBJECT-TYPE
+    SYNTAX      T11vfPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each entry represents a physical Port on a switch.
+         Switches that support Virtual Fabrics would add
+
+         these four additional columns to the fcmPortEntry
+         row."
+    REFERENCE
+        "fcmPortEntry is defined in the FC-MGMT-MIB module."
+    AUGMENTS   { fcmPortEntry }
+    ::= { t11vfPortTable 1}
+
+T11vfPortEntry ::=
+    SEQUENCE {
+        t11vfPortVfId                T11FabricIndex,
+        t11vfPortTaggingAdminStatus   INTEGER,
+        t11vfPortTaggingOperStatus    INTEGER,
+        t11vfPortStorageType        StorageType
+    }
+
+t11vfPortVfId OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The Port VF_ID assigned to this Port.  The Port VF_ID is the
+         default Virtual Fabric that is assigned to untagged frames
+         arriving at this Port.  The Control VF_ID is implicitly
+         enabled and is not set.  Communication with the Control
+         VF_ID is required."
+    REFERENCE
+        "FC-SW-4, REV 7.5, section 12.1"
+    DEFVAL    {1}
+    ::= { t11vfPortEntry 1 }
+
+t11vfPortTaggingAdminStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        off(1),
+        on(2),
+        auto(3)
+    }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object is used to configure the administrative status
+         of Virtual Fabric tagging on this Port.
+
+         SET operation   Description
+         --------------  -------------------------------------------
+         off(1)          To disable Virtual Fabric tagging on this
+                         Port.
+
+         on(2)           To enable Virtual Fabric tagging on this
+
+                         Port if the attached Port doesn't
+                         prohibit it.
+
+         auto(3)         To enable Virtual Fabric tagging if the
+                         peer requests it."
+    REFERENCE
+        "FC-SW-4, REV 7.5, section 12.4"
+    ::= { t11vfPortEntry 2 }
+
+ t11vfPortTaggingOperStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        off(1),
+        on(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is used to report the operational status of
+         Virtual Fabric tagging on this Port.
+
+         SET operation   Description
+         --------------  -------------------------------------------
+         off(1)          Virtual Fabric tagging is disabled on this
+                         Port.
+
+         on(2)           Virtual Fabric tagging is enabled on this
+                         Port."
+    REFERENCE
+        "FC-SW-4, REV 7.5, section 12.4"
+    ::= { t11vfPortEntry 3 }
+
+t11vfPortStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row, and for the
+         corresponding row in the augmented fcmPortTable.
+
+         Conceptual rows having the value 'permanent' need not
+         allow write-access to any columnar objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { t11vfPortEntry 4 }
+
+-- Locally Enabled Table
+
+t11vfLocallyEnabledTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF T11vfLocallyEnabledEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table for assigning and reporting operational status of
+         locally-enabled Virtual Fabric IDs to Ports.  The set of
+         Virtual Fabrics operational on the Port is the bit-wise
+         'AND' of the set of locally-enabled VF_IDs of this Port
+         and the locally-enabled VF_IDs of the attached Port."
+    ::= { t11vfObjects 4 }
+
+t11vfLocallyEnabledEntry OBJECT-TYPE
+    SYNTAX      T11vfLocallyEnabledEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry for each locally-enabled VF_ID on
+         each Port."
+    REFERENCE
+        "FC-SW-4, REV 7.5, section 12.4"
+    INDEX { t11vfLocallyEnabledPortIfIndex, t11vfLocallyEnabledVfId }
+    ::= { t11vfLocallyEnabledTable 1}
+
+T11vfLocallyEnabledEntry ::=
+    SEQUENCE {
+        t11vfLocallyEnabledPortIfIndex    InterfaceIndex,
+        t11vfLocallyEnabledVfId           T11FabricIndex,
+        t11vfLocallyEnabledOperStatus     INTEGER,
+        t11vfLocallyEnabledRowStatus      RowStatus,
+        t11vfLocallyEnabledStorageType    StorageType
+    }
+
+t11vfLocallyEnabledPortIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The value of the ifIndex that identifies the Port."
+    ::= { t11vfLocallyEnabledEntry 1 }
+
+t11vfLocallyEnabledVfId OBJECT-TYPE
+    SYNTAX      T11FabricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A locally-enabled VF_ID on this Port."
+    ::= { t11vfLocallyEnabledEntry 2 }
+
+t11vfLocallyEnabledOperStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        off(1),
+        on(2)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object is used to report the operational status of
+         Virtual Fabric tagging on this Port.
+
+         SET operation   Description
+         --------------  -------------------------------------------
+         off(1)          Virtual Fabric tagging is disabled on this
+                         Port.
+
+         on(2)           Virtual Fabric tagging is enabled on this
+                         Port."
+    REFERENCE
+        "FC-SW-4, REV 7.3, section 12.4"
+    ::= { t11vfLocallyEnabledEntry 3 }
+
+t11vfLocallyEnabledRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The status of this conceptual row.
+
+             When a row in this table is in 'active(1)' state,
+             no object in that row can be modified except
+             t11vfLocallyEnabledRowStatus and
+             t11vfLocallyEnabledStorageType."
+        ::= { t11vfLocallyEnabledEntry 4 }
+
+t11vfLocallyEnabledStorageType OBJECT-TYPE
+        SYNTAX      StorageType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The storage type for this conceptual row.
+             Conceptual rows having the value 'permanent' need not
+             allow write-access to any columnar objects in the row."
+        DEFVAL { nonVolatile }
+        ::= { t11vfLocallyEnabledEntry 5 }
+
+--********************************
+
+-- Conformance Section
+--
+
+t11vfMIBCompliances OBJECT IDENTIFIER ::= { t11vfConformance 1 }
+t11vfMIBGroups      OBJECT IDENTIFIER ::= { t11vfConformance 2 }
+
+t11vfMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for compliance to the
+         Fibre Channel Virtual Fabric MIB."
+    MODULE  -- this module
+        MANDATORY-GROUPS { t11vfGeneralGroup }
+
+        OBJECT t11vfCoreSwitchMaxSupported
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfCoreSwitchStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfVirtualSwitchVfId
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfVirtualSwitchRowStatus
+        SYNTAX RowStatus { active(1) }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfVirtualSwitchStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfPortVfId
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfPortTaggingAdminStatus
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfPortStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfLocallyEnabledRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT t11vfLocallyEnabledStorageType
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { t11vfMIBCompliances 1 }
+
+-- Units of conformance
+
+    t11vfGeneralGroup  OBJECT-GROUP
+        OBJECTS { t11vfCoreSwitchMaxSupported,
+                  t11vfVirtualSwitchVfId,
+                  t11vfVirtualSwitchCoreSwitchName,
+                  t11vfVirtualSwitchRowStatus,
+                  t11vfPortVfId,
+                  t11vfPortTaggingAdminStatus,
+                  t11vfLocallyEnabledOperStatus,
+                  t11vfPortTaggingOperStatus,
+                  t11vfLocallyEnabledRowStatus,
+               t11vfCoreSwitchStorageType,
+                   t11vfVirtualSwitchStorageType,
+                  t11vfPortStorageType,
+                  t11vfLocallyEnabledStorageType
+
+        }
+        STATUS current
+        DESCRIPTION
+            "A collection of objects for monitoring and
+             configuring Virtual Fabrics in a Fibre Channel switch."
+        ::= { t11vfMIBGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/T11-FC-ZONE-SERVER-MIB.mib b/snmp_builder/mibs/T11-FC-ZONE-SERVER-MIB.mib
new file mode 100644
index 0000000..31dba30
--- /dev/null
+++ b/snmp_builder/mibs/T11-FC-ZONE-SERVER-MIB.mib
@@ -0,0 +1,2638 @@
+T11-FC-ZONE-SERVER-MIB  DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, mib-2,
+    Counter32, Unsigned32
+                        FROM SNMPv2-SMI                  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP
+                        FROM SNMPv2-CONF                 -- [RFC2580]
+    TEXTUAL-CONVENTION, RowStatus,
+    StorageType,
+    TruthValue, TimeStamp
+                        FROM SNMPv2-TC                   -- [RFC2579]
+    SnmpAdminString
+                        FROM SNMP-FRAMEWORK-MIB          -- [RFC3411]
+    ifIndex             FROM IF-MIB                      -- [RFC2863]
+    fcmInstanceIndex, fcmSwitchIndex,
+    FcNameIdOrZero,
+    FcDomainIdOrZero    FROM FC-MGMT-MIB                 -- [RFC4044]
+    T11NsGs4RejectReasonCode
+                        FROM T11-FC-NAME-SERVER-MIB      -- [RFC4438]
+    T11FabricIndex      FROM T11-TC-MIB                  -- [RFC4439]
+    t11FamLocalSwitchWwn
+                        FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [RFC4439]
+
+t11ZoneServerMIB  MODULE-IDENTITY
+    LAST-UPDATED  "200706270000Z"
+    ORGANIZATION  "For the initial versions, T11.
+                   For later versions, the IETF's IMSS Working Group."
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  EMail: kzm@cisco.com"
+    DESCRIPTION
+           "The MIB module for the management of Fibre Channel Zoning
+           Servers, both for Basic Zoning Management and for Enhanced
+
+           Zoning Management, as defined in the FC-GS-5 specification.
+
+           FC-GS-5 defines (in-band) management operations for
+           manipulating the Zone Set Database, some for use in Basic
+           mode (e.g., 'Add Zone Set (AZS)', etc.), and some for use in
+           Enhanced mode (e.g., Create Zone Set (CZS)', etc.).  When
+           Enhanced Zoning Management is in use, FC-GS-5 requires that
+           these in-band management operations be rejected unless they
+           are issued within the context of a GS-5 server session.  The
+           use of a server session ensures serialized access to the
+           Zoning Database since the Fabric lock for the Zone Server
+           must be obtained as a part of establishing the server
+           session to the Zone Server.
+
+           Thus, if and when this MIB is used for Enhanced Zoning
+           Management, SNMP SetRequests that request the modification
+           of zoning definitions must be serialized with respect to
+           the GS-5 requests to modify the Zoning Database.  This is
+           achieved by requiring that an SNMP management application
+           must first obtain the Fabric lock for the Zone Server
+           before attempting to modify any zoning definitions.  The
+           companion T11-FC-FABRIC-LOCK-MIB module is defined as a means
+           of obtaining the Fabric lock for the Zone Server (or any
+           other server).
+
+           In Enhanced Zoning Management, a Zone Server keeps track of
+           changes requested in the zoning definitions, but does not
+           update its Zone Set Database unless there is (and until
+           there is) a 'commit' operation.  To model this behavior,
+           this MIB module assumes that a Zone Server (in Enhanced
+           mode) takes a snapshot of its Zone Set Database as and when
+           the Fabric lock (for the Zone Server application) is
+           obtained; this snapshot is used to create what is herein
+           called the 'copy' database.  It is this 'copy' database
+           that is then updated by SNMP SetRequests (while the Fabric
+           is locked).  If and when a 'commit' operation is requested
+           (while the Fabric is still locked), the 'copy' database is
+           then used to overwrite the previously committed contents of
+           the Zone Set Database, and the new Zone Set Database is
+           distributed to all other switches in the Fabric.  When the
+           lock is released, any changes made that were not
+           'committed' are discarded.
+
+           When this MIB is used for Basic Zoning Management, the same
+           set of MIB objects as used for Enhanced mode are used to
+           make changes to the Database of a Zone Server on a
+           particular switch, but the changes take immediate effect at
+           that switch without an explicit commit.  The distribution of
+
+           those changes to Zone Servers on other switches in the
+           Fabric is subsequently requested through the use of a
+           separate set of MIB objects.
+
+           The management information specified in this MIB module
+           includes the Zoning Database for each of one or more Fibre
+           Channel Fabrics.  A Zoning Database is a combination of the
+           Fabric's Zone Set Database and its Active Zone Set.  The
+           Active Zone Set is the Zone Set currently enforced by the
+           Fabric; a Zone Set Database is a database of the Zone Sets
+           available to be activated within a Fabric.  All the MIB
+           objects representing a Zone Set Database are modifiable at
+           any time (irrespective of the value of any RowStatus
+           object), whereas all objects representing the Active Zone
+           Set are always read-only (except to deactivate it and/or
+           activate a different one).
+
+           Copyright (C) The IETF Trust (2007).  This version
+           of this MIB module is part of RFC 4936;  see the RFC
+           itself for full legal notices."
+    REVISION  "200706270000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4936."
+    ::= { mib-2 160 }
+
+t11ZsMIBObjects        OBJECT IDENTIFIER ::= { t11ZoneServerMIB 1 }
+t11ZsMIBConformance    OBJECT IDENTIFIER ::= { t11ZoneServerMIB 2 }
+t11ZsMIBNotifications  OBJECT IDENTIFIER ::= { t11ZoneServerMIB 0 }
+t11ZsConfiguration     OBJECT IDENTIFIER ::= { t11ZsMIBObjects 1 }
+t11ZsStatistics        OBJECT IDENTIFIER ::= { t11ZsMIBObjects 2 }
+
+-- Textual Conventions
+
+T11ZsZoneMemberType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "x"
+    STATUS        current
+    DESCRIPTION
+           "Represents the addressing mechanism by
+           which a member is identified:
+
+                01 - N_Port_Name
+                02 - Domain_ID and physical port
+                03 - N_Port_ID
+                04 - Node_Name
+                05 - Alias Name
+                06 - F_Port_Name
+                E0-FF (hex) - Vendor Specific.
+           "
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.8.3.6."
+    SYNTAX        Unsigned32 (0..255)
+
+T11ZsRejectReasonExplanation ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "The reason code explanation when rejecting a
+           Zone Server request:
+
+              'other'
+                  - e.g., a reason code assigned too recently
+                    to be included in this version of this MIB
+              'noAdditionalExplanation'
+                  - there is no additional explanation
+              'zonesNotSupported'
+                  - Zones are not supported
+              'zoneSetNameUnknown'
+                  - Zone Set name is not known
+              'noZoneSetActive'
+                  - no Zone Set is currently active
+              'zoneNameUnknown'
+                  - Zone name is unknown
+              'zoneStateUnknown'
+                  - state of the Zone is not known
+              'incorrectPayloadLen'
+                  - payload length is not correct
+              'tooLargeZoneSet'
+                  - Zone Set is larger than permitted size
+              'deactivateZoneSetFailed'
+                  - deactivation of Zone Set failed
+              'reqNotSupported'
+                  - request is not supported
+              'capabilityNotSupported'
+                  - capability is not supported
+              'zoneMemberIDTypeNotSupp'
+                  - Zone Member Identifier Type is not supported
+              'invalidZoneSetDefinition'
+                  - Zone Set definition is invalid
+              'enhancedZoningCmdsNotSupported'
+                  - Enhanced Zoning commands are not supported
+              'zoneSetExists'
+                  - Zone Set already exists
+              'zoneExists'
+                  - Zone already exists
+              'aliasExists'
+                  - Zone Alias already exists
+
+              'zoneSetUnknown'
+                  - Zone Set unknown
+              'zoneUnknown'
+                  - Zone unknown
+              'aliasUnknown'
+                  - Zone Alias unknown
+              'zoneAliasTypeUnknown'
+                  - unknown Zone attribute type
+              'unableEnhancedMode'
+                  - Fabric unable to work in Enhanced Mode
+              'basicZoningCmdsNotSupported'
+                  - Basic Zoning commands are not supported
+              'zoneAttribObjectExists'
+                  - Zone attribute object already exists
+              'zoneAttribObjectUnknown'
+                  - Zone attribute object unknown
+              'requestInProcess'
+                  - request in process
+              'cmitInProcess'
+                  - CMIT in process
+              'hardEnforcementFailed'
+                  - hard enforcement failed
+              'unresolvedReferences'
+                  - unresolved references in the Zone Set Database
+              'consistencyChecksFailed'
+                  - consistency checks failed."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.9."
+    SYNTAX        INTEGER {
+                      other(1),
+                      noAdditionalExplanation(2),
+                      zonesNotSupported(3),
+                      zoneSetNameUnknown(4),
+                      noZoneSetActive(5),
+                      zoneNameUnknown(6),
+                      zoneStateUnknown(7),
+                      incorrectPayloadLen(8),
+                      tooLargeZoneSet(9),
+                      deactivateZoneSetFailed(10),
+                      reqNotSupported(11),
+                      capabilityNotSupported(12),
+                      zoneMemberIDTypeNotSupp(13),
+                      invalidZoneSetDefinition(14),
+                      enhancedZoningCmdsNotSupported(15),
+                      zoneSetExists(16),
+                      zoneExists(17),
+                      aliasExists(18),
+                      zoneSetUnknown(19),
+                      zoneUnknown(20),
+                      aliasUnknown(21),
+                      zoneAliasTypeUnknown(22),
+                      unableEnhancedMode(23),
+                      basicZoningCmdsNotSupported(24),
+                      zoneAttribObjectExists(25),
+                      zoneAttribObjectUnknown(26),
+                      requestInProcess(27),
+                      cmitInProcess(28),
+                      hardEnforcementFailed(29),
+                      unresolvedReferences(30),
+                      consistencyChecksFailed(31)
+                  }
+
+T11ZoningName ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+           "This datatype is a refinement of an SnmpAdminString,
+           and is used to represent a name stored in a Fibre
+           Channel Zoning Data Structure.
+
+           The value begins with an ASCII letter (upper or lower
+           case) followed by zero or more characters from the set:
+           lower case letters, upper case letters, numbers, and
+           the symbols ($-^_).
+
+           The value does not include fill bytes."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.8.1."
+    SYNTAX       OCTET STRING (SIZE (1..64))
+
+--
+-- The table of Zone Servers
+--
+
+t11ZsServerTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsServerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information about the Zone Servers
+           on each Fabric in one or more switches, and providing
+           the capability to perform operations on their Zone
+           Server databases."
+    ::= { t11ZsConfiguration 1 }
+
+t11ZsServerEntry OBJECT-TYPE
+    SYNTAX       T11ZsServerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information specific to a
+           Zone Server for a particular Fabric (identified by
+           the value of t11ZsServerFabricIndex) on a particular
+           switch (identified by values of fcmInstanceIndex
+           and fcmSwitchIndex).
+
+           The persistence across reboots of writable values in
+           a row of this table is given by the instance of
+           t11ZsServerDatabaseStorageType in that row."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex }
+    ::= { t11ZsServerTable 1 }
+
+T11ZsServerEntry ::= SEQUENCE {
+    t11ZsServerFabricIndex           T11FabricIndex,
+    t11ZsServerCapabilityObject      BITS,
+    t11ZsServerDatabaseStorageType   StorageType,
+    t11ZsServerDistribute            INTEGER,
+    t11ZsServerCommit                INTEGER,
+    t11ZsServerResult                INTEGER,
+    t11ZsServerReasonCode            T11NsGs4RejectReasonCode,
+    t11ZsServerReasonCodeExp         OCTET STRING,
+    t11ZsServerReasonVendorCode      OCTET STRING,
+    t11ZsServerLastChange            TimeStamp,
+    t11ZsServerHardZoning            TruthValue,
+    t11ZsServerReadFromDatabase      INTEGER,
+    t11ZsServerOperationMode         INTEGER,
+    t11ZsServerChangeModeResult      INTEGER,
+    t11ZsServerDefaultZoneSetting    INTEGER,
+    t11ZsServerMergeControlSetting   INTEGER,
+    t11ZsServerDefZoneBroadcast      TruthValue
+}
+
+t11ZsServerFabricIndex OBJECT-TYPE
+    SYNTAX       T11FabricIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A unique index value that uniquely identifies a
+           particular Fabric."
+    ::= { t11ZsServerEntry 1 }
+
+t11ZsServerCapabilityObject OBJECT-TYPE
+    SYNTAX        BITS {
+                      enhancedMode(0),
+                      zoneSetDb(1),
+                      activateDirect(2),
+                      hardZoning(3)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "This bitmap represents the capability of the switch
+           on this Fabric:
+
+               'enhancedMode' - able to support enhanced Zoning
+                                mode of operation.
+
+               'zoneSetDb'    - able to support maintaining of
+                                a Zone Set Database.
+
+               'activateDirect' - able to support the Activate
+                                  Direct command.
+
+               'hardZoning'   - able to support Hard Zoning."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, section 6.1.23.4.4"
+    ::= { t11ZsServerEntry 2 }
+
+t11ZsServerDatabaseStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the memory realization, on a
+           particular switch, of the Zone Set database for a
+           particular Fabric.  Specifically, each row in the
+           following tables:
+
+                      t11ZsSetTable
+                      t11ZsZoneTable
+                      t11ZsSetZoneTable
+                      t11ZsAliasTable
+                      t11ZsZoneMemberTable
+                      t11ZsAttribBlockTable
+                      t11ZsAttribTable
+
+           has a StorageType as specified by the instance of
+           this object that is INDEXed by the same values of
+           fcmInstanceIndex, fcmSwitchIndex, and
+
+           t11ZsServerFabricIndex.
+
+           The value of this object is also used to indicate
+           the persistence across reboots of writable values in
+           its row of the t11ZsServerTable, as well as the
+           corresponding row in the t11ZsNotifyControlTable.
+
+           If an instance of this object has the value
+           'permanent(4)', the Zone Set database for the given
+           Fabric on the given switch is not required to be
+           writeable."
+    DEFVAL { nonVolatile }
+    ::= { t11ZsServerEntry 3 }
+
+t11ZsServerDistribute OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     noop(1),
+                     zoneSetDb(2)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object can be set only in Basic mode.  When set
+           to the value 'zoneSetDb', it requests that the Zone Set
+           database of a particular switch for a particular Fabric
+           be distributed to every other switch in that Fabric,
+           e.g., by using Stage Fabric Configuration Update (SFC)
+           and Update Fabric Configuration (UFC) requests.
+
+           Setting this object to 'noop' has no effect.
+           When read, the value of this object is always 'noop'.
+
+           When the corresponding instance of t11ZsServerOperationMode
+           has the value 'enhanced', or when the corresponding instance
+           of t11ZsZoneSetResult has the value 'inProgress', it
+           is inconsistent to try to set the value of this object."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, section 6.1.19.1."
+    ::= { t11ZsServerEntry 4 }
+
+t11ZsServerCommit OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      commitZoneChanges(1),
+                      noop(2)
+                  }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+            "This object is only used in Enhanced mode.
+
+            In Enhanced mode, it can only be modified when the Fabric
+            lock for the Zone Server on the particular Fabric has been
+            obtained for use by SNMP SetRequests, and even then, only
+            by the SNMP entity identified by the value of corresponding
+            instance of t11FLockInitiator.
+
+            Setting the object requests an action:
+
+              commitZoneChanges - requests that the changes made
+                                  within this session to the Zone
+                                  Set Database be committed.
+              noop              - requests nothing.
+
+            When read, the value is always 'noop'."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.10.2."
+    ::= { t11ZsServerEntry 5 }
+
+t11ZsServerResult OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     none(1),
+                     inProgress(2),
+                     success(3),
+                     rejectFailure(4),
+                     otherFailure(5)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "In Basic mode, this object indicates the status/result
+           of the last distribution of the Zone Set database that
+           was invoked via the corresponding instance of
+           t11ZsZoneSetDistribute, e.g., the status/result of
+           Stage Fabric Configuration Update (SFC) request(s) used
+           to implement the setting of t11ZsZoneSetDistribute.
+
+           In Enhanced mode, this object indicates the status/result
+           of the last commit of changes to the Zone Set database
+           that was invoked via the corresponding instance of
+           t11ZsServerCommit.
+
+             'none'          - no distribution/commit invoked
+                               via the corresponding instance of
+                               t11ZsZoneSetDistribute (Basic mode)
+
+                               or t11ZsServerCommit (Enhanced mode).
+             'inProgress'    - distribution/commit is still in
+                               progress.
+             'success'       - distribution/commit completed
+                               successfully.
+             'rejectFailure' - distribution/commit failed due to
+                               an SW_RJT.
+             'otherFailure'  - distribution/commit failed for some
+                               other reason.
+
+           When the value is 'rejectFailure', the corresponding
+           instances of t11ZsServerReasonCode,
+           t11ZsServerReasonCodeExp and t11ZsServerReasonVendorCode
+           contain the reason codes. "
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.10.2.3."
+    ::= { t11ZsServerEntry 6 }
+
+t11ZsServerReasonCode OBJECT-TYPE
+    SYNTAX       T11NsGs4RejectReasonCode
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the corresponding instance of t11ZsZoneSetResult
+           has the value 'rejectFailure', this object contains
+           the rejection's reason code.
+
+           When the corresponding instance of t11ZsServerResult
+           has a value other than 'rejectFailure', this object
+           should contain the value 'none'."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, section 6.1.3 and
+           tables 4, 5, and 6."
+    ::= { t11ZsServerEntry 7 }
+
+t11ZsServerReasonCodeExp OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0 | 1))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the corresponding instance of t11ZsZoneSetResult
+           has the value 'rejectFailure', this object contains
+           the rejection's reason code explanation.
+
+           When the corresponding instance of t11ZsServerResult
+           has a value other than 'rejectFailure', this object
+
+           should contain the zero-length string."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, section 6.1.3 and
+           tables 4, 5, and 6."
+    ::= { t11ZsServerEntry 8 }
+
+t11ZsServerReasonVendorCode OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0 | 1))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the corresponding instance of t11ZsZoneSetResult
+           has the value 'rejectFailure', this object contains
+           the rejection's reason vendor-specific code.
+
+           When the corresponding instance of t11ZsServerResult
+           has a value other than 'rejectFailure', this object
+           should contain the zero-length string."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, section 6.1.3 and
+           tables 4, 5, and 6."
+    ::= { t11ZsServerEntry 9 }
+
+t11ZsServerLastChange OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of sysUpTime at the time of the last change
+           (creation, modification, or deletion) to the Zone Set
+           database for the Zone Server for a particular Fabric.
+           If said Zone Set database has not changed since the
+           last re-initialization of the local network management
+           system, then this object will contain a zero value."
+    ::= { t11ZsServerEntry 10 }
+
+t11ZsServerHardZoning OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object indicates whether this switch, if and when it
+           is in Basic mode, enforces Hard Zoning on this Fabric."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.10.3.2."
+    ::= { t11ZsServerEntry 11 }
+
+t11ZsServerReadFromDatabase OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      committedDB(1),
+                      copyDB(2)
+                  }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+           "In Enhanced mode, this object specifies whether
+           subsequent SNMP Responses (generated by the local SNMP
+           agent) to operations that read the configuration of
+           Zone Sets, Zones, Members, Aliases and Attributes will
+           reflect the values stored in the current (committed)
+           Zone Set database, or those stored in the 'copy'
+           database.
+
+           In Basic mode, the value of this object is always
+           'committedDB' (since there is no 'copy' database in
+           Basic mode).  In SNMP agents that don't support
+           write access to the Zone Set database, this object
+           is always 'committedDB' (since the copy database,
+           if it were to exist, would be identical)."
+    DEFVAL { committedDB }
+    ::= { t11ZsServerEntry 12 }
+
+t11ZsServerOperationMode OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      basic(1),
+                      enhanced(2)
+                  }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+           "The operational mode of the Zone Server.
+
+           Setting this object to 'enhanced' is a request that the mode
+           of operation of the Zone Server be Enhanced mode, which is
+           only possible if all devices in the Fibre Channel Fabric are
+           capable of working in Enhanced mode.  If not, the request
+           will fail and the corresponding value of
+           t11ZsServerChangeModeResult will so indicate.
+
+           Setting this object to 'basic' is a request that the mode
+           of operation of the Zone Server be Basic mode.  However,
+           such a set may fail while operating in Enhanced mode,
+           since FC-GS-5 makes no provision for changing (back)
+
+           to Basic mode.
+
+           Note that setting this object does not cause or require
+           that the Fabric lock for the Zone Server be obtained.
+           However, when this object has the value 'enhanced', any SNMP
+           SetRequests that attempt to modify the copy database cannot
+           be successful if the Fabric lock has not been obtained
+           or has since been released."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, sections 6.4.10.1.1 and 6.4.10.1.2."
+    DEFVAL { basic }
+    ::= { t11ZsServerEntry 13 }
+
+t11ZsServerChangeModeResult OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      success(1),
+                      failure(2),
+                      inProgress(3),
+                      none(4)
+                  }
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "When this object has the value of 'success' or
+           'failure', the value indicates the outcome of the most
+           recent request, invoked via t11ZsServerOperationMode,
+           to change the mode of operation of the Zone Server.
+           When such a request is in progress, this object has the
+           value 'inProgress'.  Prior to the first such request,
+           the value of this object is 'none'."
+    ::= { t11ZsServerEntry 14 }
+
+t11ZsServerDefaultZoneSetting OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     permit(1),
+                     deny(2)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object controls the Enhanced Zoning flag that
+           governs the behavior of the Default Zone on this Fabric.
+
+           If this object is set to 'permit', then the members of
+           the Default Zone on this Fabric can communicate with
+           each other.
+
+           If this object is set to 'deny', then the members of the
+           Default Zone on this Fabric cannot communicate with each
+           other."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.10.1.1."
+    DEFVAL  { deny }
+    ::= { t11ZsServerEntry 15 }
+
+t11ZsServerMergeControlSetting OBJECT-TYPE
+    SYNTAX        INTEGER {
+                      allow(1),
+                      restrict(2)
+                  }
+    MAX-ACCESS    read-write
+    STATUS        current
+    DESCRIPTION
+           "This object controls the Enhanced Zoning flag that
+           indicates the Merge Control Setting for this Fabric:
+
+               'allow'    - a switch may join the Fabric only if
+                            its Zoning Database is able to merge
+                            with the Fabric's Zoning Database.
+               'restrict' - a switch may join the Fabric only if
+                            its Zoning Database is equal to the
+                            Fabric's Zoning Database."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.10.1.1."
+    DEFVAL { allow }
+    ::= { t11ZsServerEntry 16 }
+
+t11ZsServerDefZoneBroadcast OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object controls an Enhanced Zoning capability:
+           it indicates whether Broadcast Zoning is enabled on
+           the Default Zone on this Fabric.  If this object is
+           set to 'true', then it is enabled.  If this object is
+           set to 'false', then it is disabled.
+
+           If broadcast Zoning is enabled on a Default Zone,
+           then broadcast frames generated by a member in that
+           Default Zone will be restricted to members in that
+           Default Zone."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.7.2.2."
+    ::= { t11ZsServerEntry 17 }
+
+--
+-- The table of Zone Sets
+--
+
+t11ZsSetTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsSetEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information on every Zone
+           Set in the Zone Set database of the Zone Servers
+           on each Fabric in one or more switches.
+
+           In Enhanced mode, changes to a database made via this
+           table are always made to the 'copy' database, but
+           values read from this table reflect the contents of
+           either the 'copy' database or the current (committed)
+           database as indicated by the corresponding value of
+           t11ZsServerReadFromDatabase."
+    ::= { t11ZsConfiguration 2 }
+
+t11ZsSetEntry  OBJECT-TYPE
+    SYNTAX       T11ZsSetEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about a Zone Set
+           in the Zone Set database of a particular Fabric
+           (identified by the value of t11ZsServerFabricIndex)
+           on a particular switch (identified by values of
+           fcmInstanceIndex and fcmSwitchIndex).
+
+           A Zone Set can be created in an existing Zone Set
+           database, and can contain zero or more existing
+           Zones.  As and when new Zones are created
+           (as rows in the t11ZsZoneTable), they can be added
+           to a Zone Set by creating an entry for each in the
+           t11ZsSetZoneTable.  Deleting a row from this table
+           deletes the Zone Set from the Zone Set database
+           maintained by the Zone Server, but does not otherwise
+           affect the Zone Server.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex, t11ZsSetIndex }
+    ::= { t11ZsSetTable 1 }
+
+T11ZsSetEntry ::= SEQUENCE {
+    t11ZsSetIndex          Unsigned32,
+    t11ZsSetName           T11ZoningName,
+    t11ZsSetRowStatus      RowStatus
+}
+
+t11ZsSetIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "The index of a Zone Set.  This object uniquely
+           identifies a Zone Set in the Zone Set database
+           for a particular Fabric on a particular switch."
+    ::= { t11ZsSetEntry 1 }
+
+t11ZsSetName OBJECT-TYPE
+    SYNTAX       T11ZoningName
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of this Zone Set.  The t11ZsSetName should
+           be unique within a Fabric.
+
+           The Zone Set can be renamed at any time (i.e., even
+           when the row in an active state) by setting this object
+           to a new value."
+    ::= { t11ZsSetEntry 2 }
+
+t11ZsSetRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+           This object cannot be set to 'active' unless the
+           corresponding value of t11ZsSetName is unique within
+           the Fabric's Zone Server database on this switch."
+    ::= { t11ZsSetEntry 3 }
+
+--
+-- The table of Zones
+--
+
+t11ZsZoneTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsZoneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table gives information on all the Zones in the
+           Zone Set database of the Zone Servers on each Fabric
+           in one or more switches.
+
+           In Enhanced mode, changes to a database made via this
+           table are always made to the 'copy' database, but
+           values read from this table reflect the contents of
+           either the 'copy' database or the current (committed)
+           database as indicated by the corresponding value of
+           t11ZsServerReadFromDatabase."
+    ::= { t11ZsConfiguration 3 }
+
+t11ZsZoneEntry OBJECT-TYPE
+    SYNTAX       T11ZsZoneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about a Zone
+           in the Zone Set database of a particular Fabric
+           (identified by the value of t11ZsServerFabricIndex)
+           on a particular switch (identified by values of
+           fcmInstanceIndex and fcmSwitchIndex).
+
+           A Zone can be created in an existing Zone Set
+           database, by first creating an entry in this table,
+           and then adding members to it by creating entries in the
+           t11ZsZoneMemberTable.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex, t11ZsZoneIndex }
+    ::= { t11ZsZoneTable 1 }
+
+T11ZsZoneEntry ::= SEQUENCE {
+    t11ZsZoneIndex             Unsigned32,
+    t11ZsZoneName              T11ZoningName,
+    t11ZsZoneAttribBlock       Unsigned32,
+    t11ZsZoneRowStatus         RowStatus
+}
+
+t11ZsZoneIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this
+           Zone within a particular Fabric's Zone Set database
+           on a particular switch."
+    ::= { t11ZsZoneEntry 1 }
+
+t11ZsZoneName OBJECT-TYPE
+    SYNTAX       T11ZoningName
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of this Zone.  The t11ZsZoneName should be
+           unique within a Fabric.
+
+           The Zone can be renamed by setting this object
+           to a new value."
+    ::= { t11ZsZoneEntry 2 }
+
+t11ZsZoneAttribBlock OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "This object specifies the index value of the
+           Zone Attribute Block that contains the Attributes
+           of this Zone.
+
+           In Enhanced mode, a value of zero indicates this
+           Zone has no Zone Attributes.  In Basic mode, this
+           object always has the value of zero."
+    ::= { t11ZsZoneEntry 3 }
+
+t11ZsZoneRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+           This object cannot be set to 'active' unless the
+
+           corresponding value of t11ZsZoneName is unique within
+           the Fabric's Zone Server database on this switch."
+    ::= { t11ZsZoneEntry 4 }
+
+--
+-- The table specifying the Zones that belong to each Zone Set
+--
+
+t11ZsSetZoneTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsSetZoneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table specifies which Zones belong to which Zone
+           Sets in the Zone Set database of the Zone Servers
+           on each Fabric in one or more switches."
+    ::= { t11ZsConfiguration 4 }
+
+t11ZsSetZoneEntry  OBJECT-TYPE
+    SYNTAX       T11ZsSetZoneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry specifies that a particular Zone (identified
+           by the value of t11ZsZoneIndex) is one of the Zones
+           that form a particular Zone Set (identified by the
+           value of t11ZsSetIndex) in the Zone Set database of a
+           particular Fabric (identified by the value of
+           t11ZsServerFabricIndex) on a particular switch
+           (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex).
+
+           When a row in this table exists, it references one row in
+           the t11ZsSetTable and one row in the t11ZsZoneTable.  The
+           agent must ensure that both such rows when referenced by an
+           active row in this table, do exist and have a status of
+           'active', either by refusing to create new rows in this
+           table, or by automatically deleting rows in this table.
+
+           An 'active' row in this table references one row in the
+           t11ZsSetTable and one in the t11ZsZoneTable.  The agent must
+           ensure that all such referenced rows exist with a status of
+           'active', either by refusing to create new active rows in
+           this table, or by automatically deleting any rows in this
+           table that reference a deleted row.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex,
+              t11ZsSetIndex, t11ZsZoneIndex }
+    ::= { t11ZsSetZoneTable 1 }
+
+T11ZsSetZoneEntry ::= SEQUENCE {
+    t11ZsSetZoneRowStatus      RowStatus
+}
+
+t11ZsSetZoneRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row."
+    ::= { t11ZsSetZoneEntry 1 }
+
+--
+-- The table of Zone Aliases
+--
+
+t11ZsAliasTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsAliasEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table contains information about the Zone Aliases
+           in the Zone Set database of the Zone Servers on each
+           Fabric in one or more switches.
+
+           In Enhanced mode, changes to a database made via this
+           table are always made to the 'copy' database, but
+           values read from this table reflect the contents of
+           either the 'copy' database or the current (committed)
+           database as indicated by the corresponding value of
+           t11ZsServerReadFromDatabase."
+    ::= { t11ZsConfiguration 5 }
+
+t11ZsAliasEntry OBJECT-TYPE
+    SYNTAX       T11ZsAliasEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about a Zone Alias in
+           the Zone Set database of a particular Fabric
+           (identified by the value of t11ZsServerFabricIndex) on
+
+           a particular switch (identified by values of
+           fcmInstanceIndex and fcmSwitchIndex).
+
+           A Zone Member is added to a Zone Alias by creating
+           an entry in the t11ZsZoneMemberTable pointing to a
+           row of this table via t11ZsAliasIndex, i.e.,:
+
+            - t11ZsZoneMemberParentType = 'alias',
+            - t11ZsZoneMemberParentIndex = Alias's t11ZsAliasIndex,
+            - t11ZsZoneMemberFormat != '05 - Alias Name', and
+            - t11ZsZoneMemberID = Member's identifier.
+
+           A Zone Alias is added to a Zone by creating
+           an entry in the t11ZsZoneMemberTable pointing to a
+           row of this table via t11ZsAliasName, i.e.,:
+
+            - t11ZsZoneMemberParentType = 'zone',  and
+            - t11ZsZoneMemberParentIndex = Zone's t11ZsZoneIndex,
+            - t11ZsZoneMemberFormat = '05 - Alias Name',
+            - t11ZsZoneMemberID = Alias's t11ZsAliasName.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex, t11ZsAliasIndex }
+    ::= { t11ZsAliasTable 1 }
+
+T11ZsAliasEntry ::= SEQUENCE {
+    t11ZsAliasIndex            Unsigned32,
+    t11ZsAliasName             T11ZoningName,
+    t11ZsAliasRowStatus        RowStatus
+}
+
+t11ZsAliasIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value which uniquely identifies this Zone
+           Alias within the Zone Set database of a particular
+           Fabric on a particular switch."
+    ::= { t11ZsAliasEntry 1 }
+
+t11ZsAliasName OBJECT-TYPE
+    SYNTAX       T11ZoningName
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of this Zone Alias.  The name of the Zone
+           Alias should be unique within a Fabric.
+
+           The Zone Alias can be renamed by setting this object
+           to a new value if and when it is not in a Zone, i.e.,
+           if and only if the current name is not the value of
+           any t11ZsZoneMemberID in the same Zone Set database."
+    ::= { t11ZsAliasEntry 2 }
+
+t11ZsAliasRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+           This object cannot be set to 'active' unless the
+           corresponding value of t11ZsAliasName is unique within
+           the Fabric's Zone Server database on this switch."
+    ::= { t11ZsAliasEntry 3 }
+
+--
+-- The table of Zone Members
+--
+
+t11ZsZoneMemberTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsZoneMemberEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table contains all members of a Zone/Zone Alias
+           and information about those members in the Zone Set
+           database of the Zone Servers on each Fabric in one or
+           more switches.
+
+           In Enhanced mode, changes to a database made via this
+           table are always made to the 'copy' database, but
+           values read from this table reflect the contents of
+           either the 'copy' database or the current (committed)
+           database as indicated by the corresponding value of
+           t11ZsServerReadFromDatabase."
+    ::= { t11ZsConfiguration 6 }
+
+t11ZsZoneMemberEntry OBJECT-TYPE
+    SYNTAX       T11ZsZoneMemberEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry represents the relationship between a
+           member and (one of) its 'parent(s)', i.e., a Zone
+           or Zone Alias to which the member belongs, within
+           a particular Fabric (identified by the value of
+           t11ZsServerFabricIndex) on a particular switch
+           (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex).
+
+           A Zone member (other than an alias) is added to a
+           Zone by creating an entry in this table having:
+
+            - t11ZsZoneMemberParentType = 'zone',  and
+            - t11ZsZoneMemberParentIndex = Zone's t11ZsZoneIndex,
+            - t11ZsZoneMemberFormat != '05 - Alias Name',
+            - t11ZsZoneMemberID = Member's identifier.
+
+           An 'active' row in this table references rows in other
+           tables.  The agent must ensure that all such referenced
+           rows exist with a status of 'active', either by refusing to
+           create new active rows in this table, or by automatically
+           deleting any rows in this table that reference a deleted
+           row.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex, t11ZsZoneMemberParentType,
+              t11ZsZoneMemberParentIndex, t11ZsZoneMemberIndex }
+    ::= { t11ZsZoneMemberTable 1 }
+
+T11ZsZoneMemberEntry ::= SEQUENCE {
+    t11ZsZoneMemberParentType        INTEGER,
+    t11ZsZoneMemberParentIndex       Unsigned32,
+    t11ZsZoneMemberIndex             Unsigned32,
+    t11ZsZoneMemberFormat            T11ZsZoneMemberType,
+    t11ZsZoneMemberID                OCTET STRING,
+    t11ZsZoneMemberRowStatus         RowStatus
+}
+
+t11ZsZoneMemberParentType  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     zone(1), -- member belongs to a Zone
+                     alias(2) -- member belongs to a Zone Alias
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object determines whether this member belongs
+           to a Zone or Zone Alias."
+    ::= { t11ZsZoneMemberEntry 1 }
+
+t11ZsZoneMemberParentIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This object contains the index value of the Zone or
+           Zone Alias to which this member belongs.
+
+           If the value of the corresponding instance of
+           t11ZsZoneMemberParentType is 'zone', then this object
+           will contain the value of the t11ZsZoneIndex object of
+           the Zone to which this member belongs.
+
+           If the value of the corresponding instance of
+           t11ZsZoneMemberParentType is 'alias', then this object
+           will contain the value of the t11ZsAliasIndex object
+           of the Zone Alias to which this member belongs."
+    ::= { t11ZsZoneMemberEntry 2 }
+
+t11ZsZoneMemberIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this Zone
+           Member amongst all Zone Members in the Zone Set
+           database of a particular Fabric on a particular switch."
+    ::= { t11ZsZoneMemberEntry 3 }
+
+t11ZsZoneMemberFormat OBJECT-TYPE
+    SYNTAX       T11ZsZoneMemberType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "This object identifies the format of the
+           Zone/Zone Alias member's identifier contained in
+           t11ZsZoneMemberID.
+
+           This object cannot be modified while the corresponding
+           value of t11ZsZoneMemberRowStatus object is 'active'."
+    ::= { t11ZsZoneMemberEntry 4 }
+
+t11ZsZoneMemberID OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1..255))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "This object contains the Member Identifier of the
+           Zone or Alias.  The interpretation of this object
+           depends on the value of the corresponding instance
+           of t11ZsZoneMemberFormat:
+
+             - if t11ZsZoneMemberFormat is 'N_Port_Name', then
+               this object contains an N_Port_Name.
+
+             - if t11ZsZoneMemberFormat is 'Domain_ID and physical
+               port', then this object contains a 4-octet value in
+               network byte order.  The first octet is zero,
+               the second octet contains the Domain_ID, and the
+               last 2 octets contain the physical port number.
+
+             - if t11ZsZoneMemberFormat is 'N_Port_ID', then this
+               object contains the 3-octet Nx_Port FC_ID.
+
+             - if t11ZsZoneMemberFormat is 'Alias Name', then
+               this object contains the value of t11ZsAliasName
+               for some Alias in the same Zone Set database.
+
+             - if t11ZsZoneMemberFormat is 'Node_Name', then
+               this object contains an 8-octet Node_Name.
+
+             - if t11ZsZoneMemberFormat is 'F_Port_Name', then
+               this object contains an 8-octet F_Port_Name.
+
+             - if t11ZsZoneMemberFormat is one of the 'Vendor
+               Specific' values, then this object contains a value
+               of 1 to 255 octets in a format defined by the relevant
+               vendor.
+
+           This object cannot be modified while the corresponding
+           value of t11ZsZoneMemberRowStatus object is 'active'."
+    ::= { t11ZsZoneMemberEntry 5 }
+
+t11ZsZoneMemberRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+           The corresponding instances of t11ZsZoneMemberID and
+           t11ZsZoneMemberFormat objects must be set before or
+           concurrently with setting this object to 'active'."
+    ::= { t11ZsZoneMemberEntry 6 }
+
+--
+-- The table of Zone Attribute Blocks
+--
+
+t11ZsAttribBlockTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsAttribBlockEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table gives information on all the Zone
+           Attributes in the Zone Set database of the Zone
+           Servers on each Fabric in one or more switches.
+
+           In Enhanced mode, changes to a database made via this
+           table are always made to the 'copy' database, but
+           values read from this table reflect the contents of
+           either the 'copy' database or the current (committed)
+           database as indicated by the corresponding value of
+           t11ZsServerReadFromDatabase."
+    ::= { t11ZsConfiguration 7 }
+
+t11ZsAttribBlockEntry OBJECT-TYPE
+    SYNTAX       T11ZsAttribBlockEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about a Zone Attribute
+           Block (of Zone Attributes) in the Zone Set database
+           of a particular Fabric (identified by the value of
+           t11ZsServerFabricIndex) on a particular switch
+           (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex).
+
+           An 'active' row in this table references a row in the
+           t11ZsAttribBlockTable.  The agent must ensure that the
+           referenced rows exists with a status of 'active', either by
+           refusing to create new active rows in this table, or by
+           automatically deleting any rows in this table that
+           reference a deleted row.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex, t11ZsAttribBlockIndex }
+    ::= { t11ZsAttribBlockTable 1 }
+
+T11ZsAttribBlockEntry ::= SEQUENCE {
+    t11ZsAttribBlockIndex         Unsigned32,
+    t11ZsAttribBlockName          T11ZoningName,
+    t11ZsAttribBlockRowStatus     RowStatus
+}
+
+t11ZsAttribBlockIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this Zone
+           Attribute within the Zone Set database of a particular
+           Fabric on a particular switch."
+    ::= { t11ZsAttribBlockEntry 1 }
+
+t11ZsAttribBlockName OBJECT-TYPE
+    SYNTAX       T11ZoningName
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The name of this Zone Attribute Block, which should
+           be unique within the Fabric."
+    ::= { t11ZsAttribBlockEntry 2 }
+
+t11ZsAttribBlockRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row."
+    ::= { t11ZsAttribBlockEntry 3 }
+
+--
+-- The table of Zone Attributes
+--
+
+t11ZsAttribTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table gives information on the Zone Attributes
+           within the Zone Attribute Blocks in the Zone Set
+           database of the Zone Servers on each Fabric in one
+           or more switches.
+
+           In Enhanced mode, changes to a database made via this
+           table are always made to the 'copy' database, but
+           values read from this table reflect the contents of
+           either the 'copy' database or the current (committed)
+           database as indicated by the corresponding value of
+           t11ZsServerReadFromDatabase."
+    ::= { t11ZsConfiguration 8 }
+
+t11ZsAttribEntry OBJECT-TYPE
+    SYNTAX       T11ZsAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains information about a Zone
+           Attribute in a Zone Attribute Block (identified by
+           t11ZsAttribBlockIndex) in the Zone Set database of
+           a particular Fabric (identified by the value of
+           t11ZsServerFabricIndex) on a particular switch
+           (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex).
+
+           An entry in this table cannot be created prior to
+           its associated entry in the t11ZsAttribBlockTable.
+
+           The StorageType of a row in this table is specified by
+           the instance of t11ZsServerDatabaseStorageType that is
+           INDEXed by the same values of fcmInstanceIndex,
+           fcmSwitchIndex, and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex,
+              t11ZsAttribBlockIndex, t11ZsAttribIndex }
+    ::= { t11ZsAttribTable 1 }
+
+T11ZsAttribEntry ::= SEQUENCE {
+
+    t11ZsAttribIndex            Unsigned32,
+    t11ZsAttribType             Unsigned32,
+    t11ZsAttribValue            OCTET STRING,
+    t11ZsAttribRowStatus        RowStatus
+}
+
+t11ZsAttribIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this
+           Zone Attribute within its Zone Attribute Block in
+           the Zone Set database of a particular Fabric on a
+           particular switch."
+    ::= { t11ZsAttribEntry 1 }
+
+t11ZsAttribType  OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..65535)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The type of attribute:
+
+                0001       - Protocol
+                0002       - Broadcast Zone
+                0003       - Hard Zone
+                00E0 (hex) - Vendor Specific."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.8.3.8, Table 249."
+    ::= { t11ZsAttribEntry 2 }
+
+t11ZsAttribValue  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (4..252))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The value of the attribute, formatted as specified
+           in FC-GS-5 for the type given by the corresponding
+           instance of t11ZsAttribType.
+
+           Note that FC-GS-5 requires that the length of this
+           value is a multiple of 4 bytes."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.8.3.8."
+    ::= { t11ZsAttribEntry 3 }
+
+t11ZsAttribRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+           "The status of this conceptual row."
+    ::= { t11ZsAttribEntry 4 }
+
+--
+-- Activating a Zone Set
+--
+
+t11ZsActivateTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsActivateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table provides a mechanism to allow a Zone Set
+           to be activated on a Fabric."
+    ::= { t11ZsConfiguration 9 }
+
+t11ZsActivateEntry OBJECT-TYPE
+    SYNTAX       T11ZsActivateEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry reflects the state of the activation of a
+           Zone Set by a particular switch (identified by values
+           of fcmInstanceIndex and fcmSwitchIndex) on a particular
+           Fabric (identified by the value of
+           t11ZsServerFabricIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex }
+    ::= { t11ZsActivateTable 1 }
+
+T11ZsActivateEntry ::= SEQUENCE {
+    t11ZsActivateRequest       Unsigned32,
+    t11ZsActivateDeactivate    INTEGER,
+    t11ZsActivateResult        INTEGER,
+    t11ZsActivateFailCause     SnmpAdminString,
+    t11ZsActivateFailDomainId  FcDomainIdOrZero
+}
+
+t11ZsActivateRequest OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4294967295)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "Setting this object to a value is a request for a
+           Zone Set to be activated on the Fabric that is
+           represented by this row.  The Zone Set to be
+           activated is the one for which t11ZsSetIndex has
+           the same value.
+
+           If a Zone Set is already active on a Fabric when a
+           request is made to activate a different one on that
+           Fabric, then the existing Zone Set is automatically
+           deactivated and the specified Zone Set is activated
+           in its place.
+
+           The value of this object when read is always 0."
+    ::= { t11ZsActivateEntry 1 }
+
+t11ZsActivateDeactivate OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     deactivate(1),
+                     noop(2)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "Setting this object to 'deactivate' is a request
+           to deactivate the currently active Zone Set on
+           a Fabric.
+
+           Note that the deactivation of the active Zone Set
+           allows all ports to communicate or no ports to
+           communicate, depending on the current Default Zone
+           behavior.
+
+           No action is taken if this object is set to 'noop'.
+           When read, the value of this object is always 'noop'."
+    ::= { t11ZsActivateEntry 2 }
+
+t11ZsActivateResult OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     activateSuccess(1),
+                     activateFailure(2),
+                     deactivateSuccess(3),
+                     deactivateFailure(4),
+                     inProgress(5),
+                     none(6)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object indicates the outcome of the most recent
+           activation/deactivation using this entry.
+
+           When the value of this object is 'inProgress', the
+           values of the corresponding instances of
+           t11ZsActivateRequest and t11ZsActivateDeactivate
+           cannot be modified.
+
+           The value 'none' indicates activation/deactivation
+           has not been attempted since the last restart of
+           the management system."
+    ::= { t11ZsActivateEntry 3 }
+
+t11ZsActivateFailCause OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..64))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "A textual message indicating the reason for the
+           most recent failure of a Zone Set activation or
+           deactivation, or the zero-length string if no
+           information is available (e.g., because the
+           corresponding instance of t11ZsActivateResult
+           has the value 'none').
+
+           When the corresponding instance of
+           t11ZsActivateResult is either 'activateFailure'
+           or 'deactivateFailure', the value of this object
+           indicates the reason for that failure."
+    ::= { t11ZsActivateEntry 4 }
+
+t11ZsActivateFailDomainId OBJECT-TYPE
+    SYNTAX       FcDomainIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "If the failure cause (as indicated by
+           t11ZsSetFailCause) was specific to a particular
+           device, this object contains the Domain_ID of that
+           device.  Otherwise, this object contains zero."
+    ::= { t11ZsActivateEntry 5 }
+
+--
+-- t11ZsActiveTable
+--
+
+t11ZsActiveTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsActiveEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table containing information on the currently
+           enforced/active Zone Set on each Fabric.
+           An active Zone Set cannot be modified.
+           This table will be empty when no Zone Set is
+           activated."
+    ::= { t11ZsConfiguration 10 }
+
+t11ZsActiveEntry OBJECT-TYPE
+    SYNTAX       T11ZsActiveEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry represents an active Zone Set of a
+           particular Fabric (identified by the value of
+           t11ZsServerFabricIndex), according to a particular
+           switch (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex }
+    ::= { t11ZsActiveTable 1 }
+
+T11ZsActiveEntry ::= SEQUENCE {
+    t11ZsActiveZoneSetName    T11ZoningName,
+    t11ZsActiveActivateTime   TimeStamp
+}
+
+t11ZsActiveZoneSetName OBJECT-TYPE
+    SYNTAX       T11ZoningName
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The name of this Zone Set on this Fabric."
+    ::= { t11ZsActiveEntry 1 }
+
+t11ZsActiveActivateTime OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of sysUpTime at which this entry was most
+           recently activated.  If this row was activated prior to
+           the last re-initialization of the local network management
+           system, then this object will contain a zero value."
+    ::= { t11ZsActiveEntry 2 }
+
+--
+-- Zones in the Active/Enforced Zone Set
+--
+
+t11ZsActiveZoneTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsActiveZoneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table contains all the Zones that are present in
+           the active Zone Sets on all Fabrics."
+    ::= { t11ZsConfiguration 11 }
+
+t11ZsActiveZoneEntry OBJECT-TYPE
+    SYNTAX       T11ZsActiveZoneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry represents a Zone in the active Zone Set
+           of a particular Fabric (identified by the value of
+           t11ZsServerFabricIndex), according to a particular
+           switch (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex, t11ZsActiveZoneIndex }
+    ::= { t11ZsActiveZoneTable 1 }
+
+T11ZsActiveZoneEntry ::= SEQUENCE {
+    t11ZsActiveZoneIndex           Unsigned32,
+    t11ZsActiveZoneName            T11ZoningName,
+    t11ZsActiveZoneBroadcastZoning TruthValue,
+    t11ZsActiveZoneHardZoning      TruthValue
+}
+
+t11ZsActiveZoneIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this Zone
+           within the active Zone Set on a particular Fabric."
+    ::= { t11ZsActiveZoneEntry 1 }
+
+t11ZsActiveZoneName OBJECT-TYPE
+    SYNTAX       T11ZoningName
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The name of this Zone."
+    ::= { t11ZsActiveZoneEntry 2 }
+
+t11ZsActiveZoneBroadcastZoning OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object indicates whether broadcast Zoning is
+           enabled on this Zone.  If broadcast Zoning is enabled,
+           then broadcast frames generated by a member in this
+           Zone will be restricted to members in this Zone.
+
+           This object is only instantiated in Enhanced mode."
+    ::= { t11ZsActiveZoneEntry 3 }
+
+t11ZsActiveZoneHardZoning OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object indicates whether hard Zoning is
+           enabled on this Zone.
+
+           This object is only instantiated in Enhanced mode."
+    ::= { t11ZsActiveZoneEntry 4 }
+
+--
+-- Zone Members in the Active/Enforced Zone Set
+--
+
+t11ZsActiveZoneMemberTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsActiveZoneMemberEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table contains all members of all Zones
+           within the active Zone Set on any Fabric."
+    ::= { t11ZsConfiguration 12 }
+
+t11ZsActiveZoneMemberEntry OBJECT-TYPE
+    SYNTAX       T11ZsActiveZoneMemberEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry represents a member of a Zone in the active
+           Zone Set of a particular Fabric (identified by the value
+           t11ZsServerFabricIndex), according to a particular
+           switch (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex,
+              t11ZsActiveZoneIndex, t11ZsActiveZoneMemberIndex }
+    ::= { t11ZsActiveZoneMemberTable 1 }
+
+T11ZsActiveZoneMemberEntry ::= SEQUENCE {
+    t11ZsActiveZoneMemberIndex      Unsigned32,
+    t11ZsActiveZoneMemberFormat     T11ZsZoneMemberType,
+    t11ZsActiveZoneMemberID         OCTET STRING
+}
+
+t11ZsActiveZoneMemberIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this
+           member amongst the members of a particular Zone
+           in the active Zone Set on a particular Fabric."
+    ::= { t11ZsActiveZoneMemberEntry 1 }
+
+t11ZsActiveZoneMemberFormat OBJECT-TYPE
+    SYNTAX       T11ZsZoneMemberType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This object identifies the identifier format of the
+           corresponding instance of t11ZsActiveZoneMemberID."
+    ::= { t11ZsActiveZoneMemberEntry 2 }
+
+t11ZsActiveZoneMemberID OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "This value of this object identifies the member
+           using the format specified in the corresponding
+           instance of t11ZsActiveZoneMemberFormat."
+    ::= { t11ZsActiveZoneMemberEntry 3 }
+
+--
+-- Zone Attributes in the Active/Enforced Zone Set
+--
+
+t11ZsActiveAttribTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsActiveAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "This table contains information about some of the
+           Attributes of the Zones within the active Zone Set
+           on each Fabric.
+
+           This table contains all the types of attributes
+           that might apply zero, one, or more times to a Zone.
+           Attributes that apply once and only to a Zone are
+           specified in the t11ZsActiveZoneTable.
+
+           This table will always be empty in Basic mode.
+           It will also be empty if there are no Zones in
+           any active Zone Set having any of the applicable
+           types of attributes."
+    ::= { t11ZsConfiguration 13 }
+
+t11ZsActiveAttribEntry OBJECT-TYPE
+    SYNTAX       T11ZsActiveAttribEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains an Attribute of a particular
+           Zone in the active Zone Set of a particular Fabric
+           (identified by the value of t11ZsServerFabricIndex),
+           according to a particular switch (identified by
+           values of fcmInstanceIndex and fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex,
+              t11ZsActiveZoneIndex, t11ZsActiveAttribIndex }
+    ::= { t11ZsActiveAttribTable 1 }
+
+T11ZsActiveAttribEntry ::= SEQUENCE {
+    t11ZsActiveAttribIndex        Unsigned32,
+    t11ZsActiveAttribType         Unsigned32,
+    t11ZsActiveAttribValue        OCTET STRING
+}
+
+t11ZsActiveAttribIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "An index value that uniquely identifies this
+           attribute amongst the other attributes for a
+           particular Zone in the active Zone Set on a
+           particular Fabric."
+    ::= { t11ZsActiveAttribEntry 1 }
+
+t11ZsActiveAttribType  OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..65535)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The type of attribute:
+
+                0001       - Protocol
+                00E0 (hex) - Vendor Specific
+
+           Note that type 2 (Hard) and type 3 (Broadcast)
+           do not need to be represented here, because they
+           are represented by t11ZsActiveZoneBroadcastZoning and
+           t11ZsActiveZoneHardZoning."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.8.3.8, Table 249."
+    ::= { t11ZsActiveAttribEntry 2 }
+
+t11ZsActiveAttribValue  OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (0..252))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The value of the attribute, formatted according to
+           its type as indicated by the corresponding instance
+           of t11ZsActiveAttribType.
+
+           As specified in FC-GS-5, the length of an attribute
+           value is at least 4 bytes, and if necessary, the value
+           is appended with zero bytes so that the length is a
+           multiple of 4.  For a Vendor-Specific attribute
+           value, the first 8 bytes contain the T10 Vendor ID
+           as described in FC-GS-5."
+    REFERENCE
+           "Fibre Channel - Generic Services-5 (FC-GS-5),
+           ANSI INCITS 427-2007, section 6.4.8.3.8."
+    ::= { t11ZsActiveAttribEntry 3 }
+
+--
+-- Zone Server Statistics
+--
+
+t11ZsStatsTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of statistics maintained by Zone Servers."
+    ::= { t11ZsStatistics 1 }
+
+t11ZsStatsEntry OBJECT-TYPE
+    SYNTAX       T11ZsStatsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A set of statistics for a Zone Server on a
+           particular Fabric (identified by the value of
+           t11ZsServerFabricIndex) on a particular switch
+           (identified by values of fcmInstanceIndex and
+           fcmSwitchIndex)."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex }
+    ::= { t11ZsStatsTable 1 }
+
+T11ZsStatsEntry ::= SEQUENCE {
+    t11ZsOutMergeRequests     Counter32,
+    t11ZsInMergeAccepts       Counter32,
+    t11ZsInMergeRequests      Counter32,
+    t11ZsOutMergeAccepts      Counter32,
+    t11ZsOutChangeRequests    Counter32,
+    t11ZsInChangeAccepts      Counter32,
+    t11ZsInChangeRequests     Counter32,
+    t11ZsOutChangeAccepts     Counter32,
+    t11ZsInZsRequests         Counter32,
+    t11ZsOutZsRejects         Counter32
+}
+
+t11ZsOutMergeRequests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Merge Request Frames sent by this Zone
+           Server to other Zone Servers in the same Fabric.
+
+           This counter has no discontinuities other than those
+
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11ZsStatsEntry 1 }
+
+t11ZsInMergeAccepts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Merge Accept Frames received by this Zone
+           Server from other Zone Servers in the same Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11ZsStatsEntry 2 }
+
+t11ZsInMergeRequests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Merge Request Frames received by this Zone
+           Server from other Zone Servers in the same Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11ZsStatsEntry 3 }
+
+t11ZsOutMergeAccepts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Merge Accept Frames sent by this Zone
+           Server to other Zone Servers in the same Fabric.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11ZsStatsEntry 4 }
+
+t11ZsOutChangeRequests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of change requests sent (via the Fabric
+           Management Session Protocol) by this Zone Server to
+           other Zone Servers in the same Fabric.
+
+           This includes Acquire Change Authorization requests, Stage
+           Fabric Config Update requests, Update Fabric Config requests
+           and Release Change Authorization requests.  It also includes
+           the corresponding types of requests defined by the Enhanced
+           Commit Service.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, sections 10.6 and 13."
+    ::= { t11ZsStatsEntry 5 }
+
+t11ZsInChangeAccepts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of SW_ACC messages received from other Zone
+           Servers in the same Fabric (according to the Fabric
+           Management Session Protocol) in response to change
+           requests by this Zone Server.
+
+           This includes SW_ACC messages received in response to
+           Acquire Change Authorization requests, to Stage Fabric
+           Config Update requests, to Update Fabric Config requests,
+           and to Release Change Authorization requests.  It also
+           includes responses to the corresponding types of requests
+           defined for the Enhanced Commit Service.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, sections 10.6 and 13."
+    ::= { t11ZsStatsEntry 6 }
+
+t11ZsInChangeRequests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of change requests received (via the Fabric
+           Management Session Protocol) by this Zone Server from
+           other Zone Servers in the same Fabric.
+
+           This includes Acquire Change Authorization requests, Stage
+           Fabric Config Update requests, Update Fabric Config requests
+
+           and Release Change Authorization requests.  It also includes
+           the corresponding types of requests defined by the Enhanced
+           Commit Service.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, sections 10.6 and 13."
+    ::= { t11ZsStatsEntry 7 }
+
+t11ZsOutChangeAccepts OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of SW_ACC messages sent by this Zone Server
+           (according to the Fabric Management Session Protocol) in
+           response to change requests from other Zone Servers in
+           the same Fabric.
+
+           This includes SW_ACC messages sent in response to
+           Acquire Change Authorization requests, to Stage Fabric
+           Config Update requests, to Update Fabric Config requests
+           and to Release Change Authorization requests.  It also
+           includes responses to the corresponding types of requests
+           defined for the Enhanced Commit Service.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    REFERENCE
+           "Fibre Channel - Switch Fabric-4 (FC-SW-4),
+           ANSI INCITS 418-2006, April 2006, sections 10.6 and 13."
+    ::= { t11ZsStatsEntry 8 }
+
+t11ZsInZsRequests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zone Server requests received by this
+           Zone Server on this Fabric, both those received in
+           Basic mode and in Enhanced mode.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11ZsStatsEntry 9 }
+
+t11ZsOutZsRejects OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The number of Zone Server requests rejected by this
+           Zone Server on this Fabric, both those rejected in
+           Basic mode and in Enhanced mode.
+
+           This counter has no discontinuities other than those
+           that all Counter32s have when sysUpTime=0."
+    ::= { t11ZsStatsEntry 10 }
+
+--
+-- Notification Control Table
+--
+
+t11ZsNotifyControlTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF T11ZsNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "A table of control information for notifications
+           generated due to Zone Server events."
+    ::= { t11ZsConfiguration 14 }
+
+t11ZsNotifyControlEntry OBJECT-TYPE
+    SYNTAX       T11ZsNotifyControlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+           "Each entry contains notification control information
+           specific to a Zone Server for a particular Fabric
+           (identified by the value of t11ZsServerFabricIndex)
+           on a particular switch (identified by values of
+           fcmInstanceIndex and fcmSwitchIndex).
+
+           The persistence across reboots of writable values in
+           a row of this table is specified by the instance of
+           t11ZsServerDatabaseStorageType that is INDEXed by
+           the same values of fcmInstanceIndex, fcmSwitchIndex,
+           and t11ZsServerFabricIndex."
+    INDEX   { fcmInstanceIndex, fcmSwitchIndex,
+              t11ZsServerFabricIndex }
+    ::= { t11ZsNotifyControlTable 1 }
+
+T11ZsNotifyControlEntry ::= SEQUENCE {
+     t11ZsNotifyRequestRejectEnable    TruthValue,
+     t11ZsNotifyMergeFailureEnable     TruthValue,
+     t11ZsNotifyMergeSuccessEnable     TruthValue,
+     t11ZsNotifyDefZoneChangeEnable    TruthValue,
+     t11ZsNotifyActivateEnable         TruthValue,
+     t11ZsRejectCtCommandString        OCTET STRING,
+     t11ZsRejectRequestSource          FcNameIdOrZero,
+     t11ZsRejectReasonCode             T11NsGs4RejectReasonCode,
+     t11ZsRejectReasonCodeExp          T11ZsRejectReasonExplanation,
+     t11ZsRejectReasonVendorCode       OCTET STRING
+}
+
+t11ZsNotifyRequestRejectEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether t11ZsRequestRejectNotify
+           notifications should be generated by the Zone Server
+           for this Fabric."
+    ::= { t11ZsNotifyControlEntry 1 }
+
+t11ZsNotifyMergeFailureEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether t11ZsMergeFailureNotify
+           notifications should be generated by the Zone Server
+           for this Fabric."
+    ::= { t11ZsNotifyControlEntry 2 }
+
+t11ZsNotifyMergeSuccessEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether t11ZsMergeSuccessNotify
+           notifications should be generated by the Zone Server
+           for this Fabric."
+    ::= { t11ZsNotifyControlEntry 3 }
+
+t11ZsNotifyDefZoneChangeEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether t11ZsDefZoneChangeNotify
+           notifications should be generated by the Zone Server
+
+           for this Fabric."
+    ::= { t11ZsNotifyControlEntry 4 }
+
+t11ZsNotifyActivateEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+           "This object specifies whether t11ZsActivateNotify
+           notifications should be generated by the Zone Server
+           for this Fabric."
+    ::= { t11ZsNotifyControlEntry 5 }
+
+t11ZsRejectCtCommandString OBJECT-TYPE
+    SYNTAX        OCTET STRING (SIZE (0..255))
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+           "The binary content of the Zone Server request,
+           formatted as an octet string (in network byte order)
+           containing the Common Transport Information Unit
+           (CT_IU), as described in Table 2 of FC-GS-5 (including
+           the preamble), which was most recently rejected by the
+           Fabric Configuration Server for this Fabric.
+
+           This object contains the zero-length string
+           if and when the CT-IU's content is unavailable.
+
+           When the length of this object is 255 octets, it
+           contains the first 255 octets of the CT-IU (in
+           network byte order)."
+    ::= { t11ZsNotifyControlEntry 6 }
+
+t11ZsRejectRequestSource OBJECT-TYPE
+    SYNTAX       FcNameIdOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The WWN that was the source of the CT_IU
+           contained in the corresponding instance of
+           t11ZsRejectCtCommandString."
+    ::= { t11ZsNotifyControlEntry 7 }
+
+t11ZsRejectReasonCode OBJECT-TYPE
+    SYNTAX       T11NsGs4RejectReasonCode
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "The reason code corresponding to the most recent
+           rejection of a request by the Zone Server for
+           this Fabric."
+    ::= { t11ZsNotifyControlEntry 8 }
+
+t11ZsRejectReasonCodeExp OBJECT-TYPE
+    SYNTAX       T11ZsRejectReasonExplanation
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the value of t11ZsRejectReasonCode is
+           'Unable to perform command request', this
+           object contains the corresponding reason code
+           explanation."
+    ::= { t11ZsNotifyControlEntry 9 }
+
+t11ZsRejectReasonVendorCode       OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE (1))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+           "When the value of t11ZsRejectReasonCode is
+           'Vendor Specific Error', this object contains
+           the corresponding vendor-specific reason code."
+    ::= { t11ZsNotifyControlEntry 10 }
+
+t11ZsFabricIndex OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..4096)
+    MAX-ACCESS   accessible-for-notify
+    STATUS       current
+    DESCRIPTION
+           "This object contains either a value of
+           T11FabricIndex to identify the Fabric on which
+           some occurrence has caused a notification to be
+           generated, or it has the value 4096 to indicate
+           all applicable Fabrics."
+    ::= { t11ZsConfiguration 15 }
+
+-- Notifications
+
+t11ZsRequestRejectNotify NOTIFICATION-TYPE
+    OBJECTS      { t11FamLocalSwitchWwn,
+                   t11ZsRejectRequestSource,
+                   t11ZsRejectCtCommandString,
+                   t11ZsRejectReasonCode,
+                   t11ZsRejectReasonCodeExp,
+                   t11ZsRejectReasonVendorCode }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated whenever a Zone Server
+           (indicated by the value of t11FamLocalSwitchWwn) rejects
+           a request.
+
+           The value of t11ZsRejectCtCommandString indicates the
+           rejected request, and the values of t11ZsRejectReasonCode,
+           t11ZsRejectReasonCodeExp and t11ZsRejectReasonVendorCode
+           indicate the reason for the rejection.  The value of
+           t11ZsRequestClient indicates the source of the request."
+    ::= { t11ZsMIBNotifications 1 }
+
+t11ZsMergeFailureNotify NOTIFICATION-TYPE
+    OBJECTS      { ifIndex, t11ZsFabricIndex }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that a Zone merge
+           failure has occurred on the Fabric indicated by the
+           value of t11ZsFabricIndex, on the interface
+           indicated by the value of ifIndex.
+
+           If multiple Virtual Fabrics are configured on an
+           interface, and all have a Zone merge failure
+           at the same time, then just one notification is
+           generated and t11ZsFabricIndex has the value 4096."
+    ::= { t11ZsMIBNotifications 2 }
+
+t11ZsMergeSuccessNotify NOTIFICATION-TYPE
+    OBJECTS      { ifIndex, t11ZsFabricIndex }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that a successful Zone
+           merge has occurred on the Fabric indicated by the
+           value of t11ZsFabricIndex, on the interface
+           indicated by the value of ifIndex.
+
+           If multiple Virtual Fabrics are configured on an
+           interface, and all have a successful Zone Merge
+
+           at the same time, then just one notification is
+           generated and t11ZsFabricIndex has the value 4096."
+    ::= { t11ZsMIBNotifications 3 }
+
+t11ZsDefZoneChangeNotify NOTIFICATION-TYPE
+    OBJECTS      { t11ZsServerDefaultZoneSetting }
+    STATUS       current
+    DESCRIPTION
+           "This notification indicates that the
+           value of a Default Zone Setting has changed.
+           The value of t11ZsServerDefaultZoneSetting
+           contains the value after the change."
+    ::= { t11ZsMIBNotifications 4 }
+
+t11ZsActivateNotify NOTIFICATION-TYPE
+    OBJECTS      { t11FamLocalSwitchWwn, t11ZsActivateResult }
+    STATUS       current
+    DESCRIPTION
+           "This notification is generated whenever a switch
+           (indicated by the value of t11FamLocalSwitchWwn)
+           activates/deactivates a Zone Set on a Fabric.
+           The t11ZsActivateResult object denotes the outcome
+           of the activation/deactivation."
+    ::= { t11ZsMIBNotifications 5 }
+
+-- Conformance
+
+t11ZsMIBCompliances OBJECT IDENTIFIER ::= { t11ZsMIBConformance 1 }
+t11ZsMIBGroups      OBJECT IDENTIFIER ::= { t11ZsMIBConformance 2 }
+
+t11ZsMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+           "The compliance statement for entities that
+           implement the Zone Server."
+    MODULE MANDATORY-GROUPS {t11ZsBasicGroup,
+                             t11ZsNotificationControlGroup,
+                             t11ZsNotificationGroup }
+
+    GROUP        t11ZsEnhancedModeGroup
+    DESCRIPTION
+           "This group is mandatory only for those systems
+           with Zone Servers that support Enhanced Mode."
+
+    GROUP        t11ZsActivateGroup
+    DESCRIPTION
+           "Only entities that provide write access for
+           activating a Zone Set support need to support
+
+           this group."
+
+    GROUP        t11ZsStatisticsGroup
+    DESCRIPTION
+           "These counters, containing Zone Server statistics,
+           are mandatory only for those systems that count
+           such events."
+
+    OBJECT       t11ZsSetRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsZoneRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsSetZoneRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAliasRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsZoneMemberRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAttribBlockRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAttribRowStatus
+    SYNTAX       INTEGER { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerDatabaseStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerDistribute
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerCommit
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerReadFromDatabase
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerOperationMode
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerDefaultZoneSetting
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerMergeControlSetting
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsServerDefZoneBroadcast
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsSetName
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsZoneName
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsZoneAttribBlock
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAliasName
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsZoneMemberFormat
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsZoneMemberID
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAttribBlockName
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAttribType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsAttribValue
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsActivateRequest
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsActivateDeactivate
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsNotifyRequestRejectEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsNotifyMergeFailureEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsNotifyMergeSuccessEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsNotifyDefZoneChangeEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+
+    OBJECT       t11ZsNotifyActivateEnable
+    MIN-ACCESS   read-only
+    DESCRIPTION
+           "Write access is not required."
+    ::= { t11ZsMIBCompliances 1 }
+
+-- Units of Conformance
+
+t11ZsBasicGroup OBJECT-GROUP
+    OBJECTS  { t11ZsServerCapabilityObject,
+               t11ZsServerDatabaseStorageType,
+               t11ZsServerDistribute,
+               t11ZsServerResult,
+               t11ZsServerReasonCode,
+               t11ZsServerReasonCodeExp,
+               t11ZsServerReasonVendorCode,
+               t11ZsServerLastChange,
+               t11ZsServerHardZoning,
+               t11ZsServerReadFromDatabase,
+               t11ZsServerOperationMode,
+               t11ZsSetName,
+               t11ZsSetRowStatus,
+               t11ZsZoneName,
+               t11ZsZoneAttribBlock,
+               t11ZsZoneRowStatus,
+               t11ZsSetZoneRowStatus,
+               t11ZsZoneMemberFormat,
+               t11ZsZoneMemberID,
+               t11ZsZoneMemberRowStatus,
+               t11ZsActiveZoneSetName,
+               t11ZsActiveActivateTime,
+               t11ZsActiveZoneName,
+               t11ZsActiveZoneMemberFormat,
+               t11ZsActiveZoneMemberID
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for displaying and updating
+           the Zone configuration of a Zone Server capable of
+           operating in Basic mode."
+    ::= { t11ZsMIBGroups 1 }
+
+t11ZsEnhancedModeGroup OBJECT-GROUP
+    OBJECTS  { t11ZsServerCommit,
+               t11ZsServerChangeModeResult,
+               t11ZsServerDefaultZoneSetting,
+               t11ZsServerMergeControlSetting,
+               t11ZsServerDefZoneBroadcast,
+               t11ZsAliasName,
+               t11ZsAliasRowStatus,
+               t11ZsAttribBlockName,
+               t11ZsAttribBlockRowStatus,
+               t11ZsAttribType,
+               t11ZsAttribValue,
+               t11ZsAttribRowStatus,
+               t11ZsActiveZoneBroadcastZoning,
+               t11ZsActiveZoneHardZoning,
+               t11ZsActiveAttribType,
+               t11ZsActiveAttribValue
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of additional objects for displaying
+           and updating the Zone configuration of a Zone Server
+           capable of operating in Enhanced mode."
+    ::= { t11ZsMIBGroups 2 }
+
+t11ZsStatisticsGroup OBJECT-GROUP
+    OBJECTS  { t11ZsOutMergeRequests,
+               t11ZsInMergeAccepts,
+               t11ZsInMergeRequests,
+               t11ZsOutMergeAccepts,
+               t11ZsOutChangeRequests,
+               t11ZsInChangeAccepts,
+               t11ZsInChangeRequests,
+               t11ZsOutChangeAccepts,
+               t11ZsInZsRequests,
+               t11ZsOutZsRejects
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects for collecting Zone Server
+            statistics information."
+    ::= { t11ZsMIBGroups 3 }
+
+t11ZsNotificationControlGroup OBJECT-GROUP
+    OBJECTS  { t11ZsNotifyRequestRejectEnable,
+               t11ZsNotifyMergeFailureEnable,
+               t11ZsNotifyMergeSuccessEnable,
+               t11ZsNotifyDefZoneChangeEnable,
+               t11ZsNotifyActivateEnable,
+               t11ZsRejectCtCommandString,
+               t11ZsRejectRequestSource,
+               t11ZsRejectReasonCode,
+               t11ZsRejectReasonCodeExp,
+               t11ZsRejectReasonVendorCode,
+               t11ZsFabricIndex
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of notification control and
+           notification information objects for monitoring
+           Zone Server request rejection and Zone merge
+           failures."
+    ::= { t11ZsMIBGroups 4 }
+
+t11ZsActivateGroup OBJECT-GROUP
+    OBJECTS  { t11ZsActivateRequest,
+               t11ZsActivateDeactivate,
+               t11ZsActivateResult,
+               t11ZsActivateFailCause,
+               t11ZsActivateFailDomainId
+             }
+    STATUS   current
+    DESCRIPTION
+           "A collection of objects that allow a Zone Set to
+           be activated via SNMP SetRequests and provide the
+           status and result of such an activation."
+    ::= { t11ZsMIBGroups 5 }
+
+t11ZsNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { t11ZsRequestRejectNotify,
+                    t11ZsMergeFailureNotify,
+                    t11ZsMergeSuccessNotify,
+                    t11ZsDefZoneChangeNotify,
+                    t11ZsActivateNotify }
+    STATUS        current
+    DESCRIPTION
+           "A collection of notification(s) for monitoring
+           Zone Server request rejection, Zone merge
+           failures and successes, and Default Zoning
+           behavioral changes."
+    ::= { t11ZsMIBGroups 6 }
+
+END
diff --git a/snmp_builder/mibs/T11-TC-MIB.mib b/snmp_builder/mibs/T11-TC-MIB.mib
new file mode 100644
index 0000000..4111e84
--- /dev/null
+++ b/snmp_builder/mibs/T11-TC-MIB.mib
@@ -0,0 +1,67 @@
+T11-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, Unsigned32, mib-2
+                                     FROM SNMPv2-SMI  -- [RFC2578]
+    TEXTUAL-CONVENTION               FROM SNMPv2-TC;  -- [RFC2579]
+
+t11TcMIB MODULE-IDENTITY
+    LAST-UPDATED "200603020000Z"
+    ORGANIZATION "T11"
+    CONTACT-INFO
+            "     Claudio DeSanti
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA 95134 USA
+                  Phone: +1 408 853-9172
+                  EMail: cds@cisco.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA USA 95134
+                  Phone: +1 408-526-5260
+                  EMail: kzm@cisco.com"
+    DESCRIPTION
+           "This module defines textual conventions used in T11 MIBs.
+
+           Copyright (C) The Internet Society (2006).  This version
+           of this MIB module is part of RFC 4439;  see the RFC
+           itself for full legal notices."
+    REVISION    "200603020000Z"
+    DESCRIPTION
+           "Initial version of this MIB module, published as RFC 4439."
+    ::= { mib-2 136 }
+
+T11FabricIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT  "d"
+    STATUS    current
+    DESCRIPTION
+           "A Fabric Index that is used as a unique
+           index value to identify a particular Fabric within
+           one (or more) physical infrastructures.
+
+           In an environment that is conformant to FC-SW-3, where
+
+           there is always exactly one Fabric in a single physical
+           infrastructure, the value of this Fabric Index will
+           always be 1.
+
+           However, the current standard, FC-SW-4, defines
+           how multiple Fabrics, each with its own management
+           instrumentation, could operate within one (or more)
+           physical infrastructures.  When such multiple Fabrics
+           are in use, this index value is used to uniquely
+           identify a particular Fabric within a physical
+           infrastructure.
+
+           Note that the value of this textual convention has a
+           range of (0..4095) so as to be consistent with FC-SW-4,
+           which says that a 'VF_ID Bitmap' is 512 bytes long, with
+           the high-order bit representing VF_ID zero, and the
+           low-order bit representing 4095."
+    REFERENCE   "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
+                 ANSI INCITS 418-2006, section 6.1.27.2.4."
+    SYNTAX      Unsigned32 (0..4095)
+
+END
diff --git a/snmp_builder/mibs/TCP-ESTATS-MIB.mib b/snmp_builder/mibs/TCP-ESTATS-MIB.mib
new file mode 100644
index 0000000..6e17aa9
--- /dev/null
+++ b/snmp_builder/mibs/TCP-ESTATS-MIB.mib
@@ -0,0 +1,2941 @@
+TCP-ESTATS-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+       MODULE-IDENTITY, Counter32, Integer32, Unsigned32,
+       Gauge32, OBJECT-TYPE, mib-2,
+       NOTIFICATION-TYPE
+           FROM SNMPv2-SMI                 -- [RFC2578]
+       MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+           FROM SNMPv2-CONF                -- [RFC2580]
+       ZeroBasedCounter32
+           FROM RMON2-MIB                  -- [RFC4502]
+       ZeroBasedCounter64
+           FROM HCNUM-TC                   -- [RFC2856]
+       TEXTUAL-CONVENTION,
+       DateAndTime, TruthValue, TimeStamp
+
+           FROM SNMPv2-TC                  -- [RFC2579]
+       tcpListenerEntry, tcpConnectionEntry
+           FROM TCP-MIB;                   -- [RFC4022]
+
+tcpEStatsMIB MODULE-IDENTITY
+    LAST-UPDATED "200705180000Z"    -- 18 May 2007
+    ORGANIZATION "IETF TSV Working Group"
+    CONTACT-INFO
+        "Matt Mathis
+        John Heffner
+        Web100 Project
+        Pittsburgh Supercomputing Center
+        300 S. Craig St.
+        Pittsburgh, PA 15213
+        Email: mathis@psc.edu, jheffner@psc.edu
+
+        Rajiv Raghunarayan
+        Cisco Systems Inc.
+        San Jose, CA 95134
+        Phone: 408 853 9612
+        Email: raraghun@cisco.com
+
+        Jon Saperia
+        84 Kettell Plain Road
+        Stow, MA 01775
+        Phone: 617-201-2655
+        Email: saperia@jdscons.com "
+    DESCRIPTION
+        "Documentation of TCP Extended Performance Instrumentation
+         variables from the Web100 project.  [Web100]
+
+         All of the objects in this MIB MUST have the same
+         persistence properties as the underlying TCP implementation.
+         On a reboot, all zero-based counters MUST be cleared, all
+         dynamically created table rows MUST be deleted, and all
+         read-write objects MUST be restored to their default values.
+
+         It is assumed that all TCP implementation have some
+         initialization code (if nothing else to set IP addresses)
+         that has the opportunity to adjust tcpEStatsConnTableLatency
+         and other read-write scalars controlling the creation of the
+         various tables, before establishing the first TCP
+         connection.  Implementations MAY also choose to make these
+         control scalars persist across reboots.
+
+         Copyright (C) The IETF Trust (2007).  This version
+         of this MIB module is a part of RFC 4898; see the RFC
+         itself for full legal notices."
+
+    REVISION "200705180000Z"    -- 18 May 2007
+    DESCRIPTION
+        "Initial version, published as RFC 4898."
+        ::= { mib-2 156 }
+
+tcpEStatsNotifications OBJECT IDENTIFIER ::= { tcpEStatsMIB 0 }
+tcpEStatsMIBObjects    OBJECT IDENTIFIER ::= { tcpEStatsMIB 1 }
+tcpEStatsConformance   OBJECT IDENTIFIER ::= { tcpEStatsMIB 2 }
+tcpEStats             OBJECT IDENTIFIER ::= { tcpEStatsMIBObjects 1 }
+tcpEStatsControl      OBJECT IDENTIFIER ::= { tcpEStatsMIBObjects 2 }
+tcpEStatsScalar       OBJECT IDENTIFIER ::= { tcpEStatsMIBObjects 3 }
+
+--
+-- Textual Conventions
+--
+
+TcpEStatsNegotiated  ::= TEXTUAL-CONVENTION
+   STATUS             current
+   DESCRIPTION
+       "Indicates if some optional TCP feature was negotiated.
+
+        Enabled(1) indicates that the feature was successfully
+        negotiated on, which generally requires both hosts to agree
+        to use the feature.
+
+        selfDisabled(2) indicates that the local host refused the
+        feature because it is not implemented, configured off, or
+        refused for some other reason, such as the lack of
+        resources.
+
+        peerDisabled(3) indicates that the local host was willing
+        to negotiate the feature, but the remote host did not
+        do so."
+   SYNTAX INTEGER {
+                enabled(1),
+                selfDisabled(2),
+                peerDisabled(3)
+        }
+
+--
+-- TCP Extended statistics scalars
+--
+
+tcpEStatsListenerTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time of the last
+            creation or deletion of an entry in the tcpListenerTable.
+            If the number of entries has been unchanged since the
+            last re-initialization of the local network management
+            subsystem, then this object contains a zero value."
+    ::= { tcpEStatsScalar 3 }
+
+-- ================================================================
+--
+-- The tcpEStatsControl Group
+--
+
+-- The scalar objects in this group are used to control the
+-- activation and deactivation of the TCP Extended Statistics
+-- tables and notifications in this module.
+--
+
+tcpEStatsControlPath  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Controls the activation of the TCP Path Statistics
+        table.
+
+        A value 'true' indicates that the TCP Path Statistics
+        table is active, while 'false' indicates that the
+        table is inactive."
+    DEFVAL          { false }
+    ::= { tcpEStatsControl 1 }
+
+tcpEStatsControlStack  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Controls the activation of the TCP Stack Statistics
+        table.
+
+        A value 'true' indicates that the TCP Stack Statistics
+        table is active, while 'false' indicates that the
+        table is inactive."
+    DEFVAL          { false }
+    ::= { tcpEStatsControl 2 }
+
+tcpEStatsControlApp  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Controls the activation of the TCP Application
+        Statistics table.
+
+        A value 'true' indicates that the TCP Application
+        Statistics table is active, while 'false' indicates
+        that the table is inactive."
+    DEFVAL          { false }
+    ::= { tcpEStatsControl 3 }
+
+tcpEStatsControlTune  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Controls the activation of the TCP Tuning table.
+
+        A value 'true' indicates that the TCP Tuning
+        table is active, while 'false' indicates that the
+        table is inactive."
+    DEFVAL          { false }
+    ::= { tcpEStatsControl 4 }
+
+tcpEStatsControlNotify  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Controls the generation of all notifications defined in
+        this MIB.
+
+        A value 'true' indicates that the notifications
+        are active, while 'false' indicates that the
+        notifications are inactive."
+    DEFVAL          { false }
+    ::= { tcpEStatsControl 5 }
+
+tcpEStatsConnTableLatency OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "seconds"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies the number of seconds that the entity will
+         retain entries in the TCP connection tables, after the
+         connection first enters the closed state.  The entity
+         SHOULD provide a configuration option to enable
+
+         customization of this value.  A value of 0
+         results in entries being removed from the tables as soon as
+         the connection enters the closed state.  The value of
+         this object pertains to the following tables:
+           tcpEStatsConnectIdTable
+           tcpEStatsPerfTable
+           tcpEStatsPathTable
+           tcpEStatsStackTable
+           tcpEStatsAppTable
+           tcpEStatsTuneTable"
+    DEFVAL { 0 }
+    ::= { tcpEStatsControl 6 }
+
+-- ================================================================
+--
+-- Listener Table
+--
+
+tcpEStatsListenerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsListenerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains information about TCP Listeners,
+        in addition to the information maintained by the
+        tcpListenerTable RFC 4022."
+    ::= { tcpEStats 1 }
+
+tcpEStatsListenerEntry OBJECT-TYPE
+    SYNTAX       TcpEStatsListenerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in the table contains information about
+        a specific TCP Listener."
+    AUGMENTS { tcpListenerEntry }
+    ::= { tcpEStatsListenerTable 1 }
+
+TcpEStatsListenerEntry ::= SEQUENCE {
+        tcpEStatsListenerStartTime         TimeStamp,
+        tcpEStatsListenerSynRcvd           ZeroBasedCounter32,
+        tcpEStatsListenerInitial           ZeroBasedCounter32,
+        tcpEStatsListenerEstablished       ZeroBasedCounter32,
+        tcpEStatsListenerAccepted          ZeroBasedCounter32,
+        tcpEStatsListenerExceedBacklog     ZeroBasedCounter32,
+        tcpEStatsListenerHCSynRcvd         ZeroBasedCounter64,
+        tcpEStatsListenerHCInitial         ZeroBasedCounter64,
+        tcpEStatsListenerHCEstablished     ZeroBasedCounter64,
+        tcpEStatsListenerHCAccepted        ZeroBasedCounter64,
+        tcpEStatsListenerHCExceedBacklog   ZeroBasedCounter64,
+        tcpEStatsListenerCurConns          Gauge32,
+        tcpEStatsListenerMaxBacklog        Unsigned32,
+        tcpEStatsListenerCurBacklog        Gauge32,
+        tcpEStatsListenerCurEstabBacklog   Gauge32
+}
+
+tcpEStatsListenerStartTime   OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime at the time this listener was
+        established.  If the current state was entered prior to
+        the last re-initialization of the local network management
+        subsystem, then this object contains a zero value."
+    ::= { tcpEStatsListenerEntry 1 }
+
+tcpEStatsListenerSynRcvd OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of SYNs which have been received for this
+        listener.  The total number of failed connections for
+        all reasons can be estimated to be tcpEStatsListenerSynRcvd
+        minus tcpEStatsListenerAccepted and
+        tcpEStatsListenerCurBacklog."
+    ::= { tcpEStatsListenerEntry 2 }
+
+tcpEStatsListenerInitial     OBJECT-TYPE
+   SYNTAX     ZeroBasedCounter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The total number of connections for which the Listener
+       has allocated initial state and placed the
+       connection in the backlog.  This may happen in the
+       SYN-RCVD or ESTABLISHED states, depending on the
+       implementation."
+    ::= { tcpEStatsListenerEntry 3 }
+
+tcpEStatsListenerEstablished OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of connections that have been established to
+        this endpoint (e.g., the number of first ACKs that have
+        been received for this listener)."
+    ::= { tcpEStatsListenerEntry 4 }
+
+tcpEStatsListenerAccepted    OBJECT-TYPE
+   SYNTAX     ZeroBasedCounter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The total number of connections for which the Listener
+       has successfully issued an accept, removing the connection
+       from the backlog."
+    ::= { tcpEStatsListenerEntry 5 }
+
+tcpEStatsListenerExceedBacklog OBJECT-TYPE
+   SYNTAX     ZeroBasedCounter32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The total number of connections dropped from the
+      backlog by this listener due to all reasons.  This
+      includes all connections that are allocated initial
+      resources, but are not accepted for some reason."
+    ::= { tcpEStatsListenerEntry 6 }
+
+tcpEStatsListenerHCSynRcvd OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of SYNs that have been received for this
+        listener on systems that can process (or reject) more
+        than 1 million connections per second.  See
+        tcpEStatsListenerSynRcvd."
+    ::= { tcpEStatsListenerEntry 7 }
+
+tcpEStatsListenerHCInitial     OBJECT-TYPE
+   SYNTAX     ZeroBasedCounter64
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The total number of connections for which the Listener
+       has allocated initial state and placed the connection
+       in the backlog on systems that can process (or reject)
+       more than 1 million connections per second.  See
+       tcpEStatsListenerInitial."
+    ::= { tcpEStatsListenerEntry 8 }
+
+tcpEStatsListenerHCEstablished OBJECT-TYPE
+    SYNTAX     ZeroBasedCounter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of connections that have been established to
+        this endpoint on systems that can process (or reject) more
+        than 1 million connections per second.  See
+        tcpEStatsListenerEstablished."
+    ::= { tcpEStatsListenerEntry 9 }
+
+tcpEStatsListenerHCAccepted    OBJECT-TYPE
+   SYNTAX     ZeroBasedCounter64
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The total number of connections for which the Listener
+       has successfully issued an accept, removing the connection
+       from the backlog on systems that can process (or reject)
+       more than 1 million connections per second.  See
+       tcpEStatsListenerAccepted."
+    ::= { tcpEStatsListenerEntry 10 }
+
+tcpEStatsListenerHCExceedBacklog OBJECT-TYPE
+   SYNTAX     ZeroBasedCounter64
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The total number of connections dropped from the
+      backlog by this listener due to all reasons on
+      systems that can process (or reject) more than
+      1 million connections per second.  See
+      tcpEStatsListenerExceedBacklog."
+    ::= { tcpEStatsListenerEntry 11 }
+
+tcpEStatsListenerCurConns   OBJECT-TYPE
+   SYNTAX     Gauge32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The current number of connections in the ESTABLISHED
+       state, which have also been accepted.  It excludes
+       connections that have been established but not accepted
+       because they are still subject to being discarded to
+       shed load without explicit action by either endpoint."
+    ::= { tcpEStatsListenerEntry 12 }
+
+tcpEStatsListenerMaxBacklog OBJECT-TYPE
+   SYNTAX     Unsigned32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The maximum number of connections allowed in the
+       backlog at one time."
+    ::= { tcpEStatsListenerEntry 13 }
+
+tcpEStatsListenerCurBacklog OBJECT-TYPE
+   SYNTAX     Gauge32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The current number of connections that are in the backlog.
+       This gauge includes connections in ESTABLISHED or
+       SYN-RECEIVED states for which the Listener has not yet
+       issued an accept.
+
+       If this listener is using some technique to implicitly
+       represent the SYN-RECEIVED states (e.g., by
+       cryptographically encoding the state information in the
+       initial sequence number, ISS), it MAY elect to exclude
+       connections in the SYN-RECEIVED state from the backlog."
+    ::= { tcpEStatsListenerEntry 14 }
+
+tcpEStatsListenerCurEstabBacklog OBJECT-TYPE
+   SYNTAX     Gauge32
+   MAX-ACCESS read-only
+   STATUS     current
+   DESCRIPTION
+      "The current number of connections in the backlog that are
+       in the ESTABLISHED state, but for which the Listener has
+       not yet issued an accept."
+    ::= { tcpEStatsListenerEntry 15 }
+
+-- ================================================================
+--
+-- TCP Connection ID Table
+--
+
+tcpEStatsConnectIdTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsConnectIdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table maps information that uniquely identifies
+        each active TCP connection to the connection ID used by
+
+        other tables in this MIB Module.  It is an extension of
+        tcpConnectionTable in RFC 4022.
+
+        Entries are retained in this table for the number of
+        seconds indicated by the tcpEStatsConnTableLatency
+        object, after the TCP connection first enters the closed
+        state."
+    ::= { tcpEStats 2 }
+
+tcpEStatsConnectIdEntry  OBJECT-TYPE
+    SYNTAX       TcpEStatsConnectIdEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in this table maps a TCP connection
+        4-tuple to a connection index."
+    AUGMENTS { tcpConnectionEntry }
+    ::= { tcpEStatsConnectIdTable 1 }
+
+TcpEStatsConnectIdEntry ::= SEQUENCE {
+        tcpEStatsConnectIndex             Unsigned32
+}
+
+tcpEStatsConnectIndex  OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "A unique integer value assigned to each TCP Connection
+        entry.
+
+        The RECOMMENDED algorithm is to begin at 1 and increase to
+        some implementation-specific maximum value and then start
+        again at 1 skipping values already in use."
+    ::= { tcpEStatsConnectIdEntry 1 }
+
+-- ================================================================
+--
+-- Basic TCP Performance Statistics
+--
+
+tcpEStatsPerfTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsPerfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains objects that are useful for
+
+        measuring TCP performance and first line problem
+        diagnosis.  Most objects in this table directly expose
+        some TCP state variable or are easily implemented as
+        simple functions (e.g., the maximum value) of TCP
+        state variables.
+
+        Entries are retained in this table for the number of
+        seconds indicated by the tcpEStatsConnTableLatency
+        object, after the TCP connection first enters the closed
+        state."
+    ::= { tcpEStats 3 }
+
+tcpEStatsPerfEntry  OBJECT-TYPE
+    SYNTAX       TcpEStatsPerfEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in this table has information about the
+        characteristics of each active and recently closed TCP
+        connection."
+   INDEX { tcpEStatsConnectIndex }
+   ::= { tcpEStatsPerfTable 1 }
+
+TcpEStatsPerfEntry ::= SEQUENCE {
+
+        tcpEStatsPerfSegsOut                ZeroBasedCounter32,
+        tcpEStatsPerfDataSegsOut            ZeroBasedCounter32,
+        tcpEStatsPerfDataOctetsOut          ZeroBasedCounter32,
+        tcpEStatsPerfHCDataOctetsOut        ZeroBasedCounter64,
+        tcpEStatsPerfSegsRetrans            ZeroBasedCounter32,
+        tcpEStatsPerfOctetsRetrans          ZeroBasedCounter32,
+        tcpEStatsPerfSegsIn                 ZeroBasedCounter32,
+        tcpEStatsPerfDataSegsIn             ZeroBasedCounter32,
+        tcpEStatsPerfDataOctetsIn           ZeroBasedCounter32,
+        tcpEStatsPerfHCDataOctetsIn         ZeroBasedCounter64,
+        tcpEStatsPerfElapsedSecs            ZeroBasedCounter32,
+        tcpEStatsPerfElapsedMicroSecs       ZeroBasedCounter32,
+        tcpEStatsPerfStartTimeStamp         DateAndTime,
+        tcpEStatsPerfCurMSS                 Gauge32,
+        tcpEStatsPerfPipeSize               Gauge32,
+        tcpEStatsPerfMaxPipeSize            Gauge32,
+        tcpEStatsPerfSmoothedRTT            Gauge32,
+        tcpEStatsPerfCurRTO                 Gauge32,
+        tcpEStatsPerfCongSignals            ZeroBasedCounter32,
+        tcpEStatsPerfCurCwnd                Gauge32,
+        tcpEStatsPerfCurSsthresh            Gauge32,
+        tcpEStatsPerfTimeouts               ZeroBasedCounter32,
+        tcpEStatsPerfCurRwinSent            Gauge32,
+        tcpEStatsPerfMaxRwinSent            Gauge32,
+        tcpEStatsPerfZeroRwinSent           ZeroBasedCounter32,
+        tcpEStatsPerfCurRwinRcvd            Gauge32,
+        tcpEStatsPerfMaxRwinRcvd            Gauge32,
+        tcpEStatsPerfZeroRwinRcvd           ZeroBasedCounter32,
+        tcpEStatsPerfSndLimTransRwin        ZeroBasedCounter32,
+        tcpEStatsPerfSndLimTransCwnd        ZeroBasedCounter32,
+        tcpEStatsPerfSndLimTransSnd         ZeroBasedCounter32,
+        tcpEStatsPerfSndLimTimeRwin         ZeroBasedCounter32,
+        tcpEStatsPerfSndLimTimeCwnd         ZeroBasedCounter32,
+        tcpEStatsPerfSndLimTimeSnd          ZeroBasedCounter32
+    }
+
+--
+--  The following objects provide statistics on aggregate
+--  segments and data sent on a connection.  These provide a
+--  direct measure of the Internet capacity consumed by a
+--  connection.
+--
+
+tcpEStatsPerfSegsOut  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The total number of segments sent."
+    ::= { tcpEStatsPerfEntry 1 }
+
+tcpEStatsPerfDataSegsOut  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of segments sent containing a positive length
+        data segment."
+    ::= { tcpEStatsPerfEntry 2 }
+
+tcpEStatsPerfDataOctetsOut  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets of data contained in transmitted
+        segments, including retransmitted data.  Note that this does
+        not include TCP headers."
+    ::= { tcpEStatsPerfEntry 3 }
+
+tcpEStatsPerfHCDataOctetsOut  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter64
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets of data contained in transmitted
+        segments, including retransmitted data, on systems that can
+        transmit more than 10 million bits per second.  Note that
+        this does not include TCP headers."
+    ::= { tcpEStatsPerfEntry 4 }
+
+tcpEStatsPerfSegsRetrans  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of segments transmitted containing at least some
+        retransmitted data."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 5 }
+
+tcpEStatsPerfOctetsRetrans  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets retransmitted."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 6 }
+
+tcpEStatsPerfSegsIn  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The total number of segments received."
+    ::= { tcpEStatsPerfEntry 7 }
+
+tcpEStatsPerfDataSegsIn  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of segments received containing a positive
+
+        length data segment."
+    ::= { tcpEStatsPerfEntry 8 }
+
+tcpEStatsPerfDataOctetsIn  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets contained in received data segments,
+        including retransmitted data.  Note that this does not
+        include TCP headers."
+    ::= { tcpEStatsPerfEntry 9 }
+
+tcpEStatsPerfHCDataOctetsIn  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter64
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets contained in received data segments,
+        including retransmitted data, on systems that can receive
+        more than 10 million bits per second.  Note that this does
+        not include TCP headers."
+    ::= { tcpEStatsPerfEntry 10 }
+
+tcpEStatsPerfElapsedSecs  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "seconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The seconds part of the time elapsed between
+        tcpEStatsPerfStartTimeStamp and the most recent protocol
+        event (segment sent or received)."
+    ::= { tcpEStatsPerfEntry 11 }
+
+tcpEStatsPerfElapsedMicroSecs  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "microseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The micro-second part of time elapsed between
+        tcpEStatsPerfStartTimeStamp to the most recent protocol
+        event (segment sent or received).  This may be updated in
+        whatever time granularity is the system supports."
+    ::= { tcpEStatsPerfEntry 12 }
+
+tcpEStatsPerfStartTimeStamp  OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Time at which this row was created and all
+        ZeroBasedCounters in the row were initialized to zero."
+    ::= { tcpEStatsPerfEntry 13 }
+
+--
+--  The following objects can be used to fit minimal
+--  performance models to the TCP data rate.
+--
+
+tcpEStatsPerfCurMSS  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current maximum segment size (MSS), in octets."
+    REFERENCE
+       "RFC 1122, Requirements for Internet Hosts - Communication
+        Layers"
+    ::= { tcpEStatsPerfEntry 14 }
+
+tcpEStatsPerfPipeSize  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The TCP senders current estimate of the number of
+        unacknowledged data octets in the network.
+
+        While not in recovery (e.g., while the receiver is not
+        reporting missing data to the sender), this is precisely the
+        same as 'Flight size' as defined in RFC 2581, which can be
+        computed as SND.NXT minus SND.UNA. [RFC793]
+
+        During recovery, the TCP sender has incomplete information
+        about the state of the network (e.g., which segments are
+        lost vs reordered, especially if the return path is also
+        dropping TCP acknowledgments).  Current TCP standards do not
+        mandate any specific algorithm for estimating the number of
+        unacknowledged data octets in the network.
+
+        RFC 3517 describes a conservative algorithm to use SACK
+
+        information to estimate the number of unacknowledged data
+        octets in the network. tcpEStatsPerfPipeSize object SHOULD
+        be the same as 'pipe' as defined in RFC 3517 if it is
+        implemented. (Note that while not in recovery the pipe
+        algorithm yields the same values as flight size).
+
+        If RFC 3517 is not implemented, the data octets in flight
+        SHOULD be estimated as SND.NXT minus SND.UNA adjusted by
+        some measure of the data that has left the network and
+        retransmitted data.  For example, with Reno or NewReno style
+        TCP, the number of duplicate acknowledgment is used to
+        count the number of segments that have left the network.
+        That is,
+        PipeSize=SND.NXT-SND.UNA+(retransmits-dupacks)*CurMSS"
+    REFERENCE
+       "RFC 793, RFC 2581, RFC 3517"
+    ::= { tcpEStatsPerfEntry 15 }
+
+tcpEStatsPerfMaxPipeSize  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum value of tcpEStatsPerfPipeSize, for this
+        connection."
+    REFERENCE
+       "RFC 793, RFC 2581, RFC 3517"
+    ::= { tcpEStatsPerfEntry 16 }
+
+tcpEStatsPerfSmoothedRTT  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The smoothed round trip time used in calculation of the
+        RTO. See SRTT in [RFC2988]."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPerfEntry 17 }
+
+tcpEStatsPerfCurRTO  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current value of the retransmit timer RTO."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPerfEntry 18 }
+
+tcpEStatsPerfCongSignals  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of multiplicative downward congestion window
+        adjustments due to all forms of congestion signals,
+        including Fast Retransmit, Explicit Congestion Notification
+        (ECN), and timeouts.  This object summarizes all events that
+        invoke the MD portion of Additive Increase Multiplicative
+        Decrease (AIMD) congestion control, and as such is the best
+        indicator of how a cwnd is being affected by congestion.
+
+        Note that retransmission timeouts multiplicatively reduce
+        the window implicitly by setting ssthresh, and SHOULD be
+        included in tcpEStatsPerfCongSignals.  In order to minimize
+        spurious congestion indications due to out-of-order
+        segments, tcpEStatsPerfCongSignals SHOULD be incremented in
+        association with the Fast Retransmit algorithm."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPerfEntry 19 }
+
+tcpEStatsPerfCurCwnd  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current congestion window, in octets."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPerfEntry 20 }
+
+tcpEStatsPerfCurSsthresh  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current slow start threshold in octets."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPerfEntry 21 }
+
+tcpEStatsPerfTimeouts  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of times the retransmit timeout has expired when
+        the RTO backoff multiplier is equal to one."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPerfEntry 22 }
+
+--
+--  The following objects instrument receiver window updates
+--  sent by the local receiver to the remote sender.  These can
+--  be used to determine if the local receiver is exerting flow
+--  control back pressure on the remote sender.
+--
+
+tcpEStatsPerfCurRwinSent  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The most recent window advertisement sent, in octets."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 23 }
+
+tcpEStatsPerfMaxRwinSent  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum window advertisement sent, in octets."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 24 }
+
+tcpEStatsPerfZeroRwinSent  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of acknowledgments sent announcing a zero
+
+        receive window, when the previously announced window was
+        not zero."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 25 }
+
+--
+--  The following objects instrument receiver window updates
+--  from the far end-system to determine if the remote receiver
+--  has sufficient buffer space or is exerting flow-control
+--  back pressure on the local sender.
+--
+
+tcpEStatsPerfCurRwinRcvd  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The most recent window advertisement received, in octets."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 26 }
+
+tcpEStatsPerfMaxRwinRcvd  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum window advertisement received, in octets."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 27 }
+
+tcpEStatsPerfZeroRwinRcvd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of acknowledgments received announcing a zero
+        receive window, when the previously announced window was
+        not zero."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 28 }
+
+--
+
+--  The following optional objects can be used to quickly
+--  identify which subsystems are limiting TCP performance.
+--  There are three parallel pairs of instruments that measure
+--  the extent to which TCP performance is limited by the
+--  announced receiver window (indicating a receiver
+--  bottleneck), the current congestion window or
+--  retransmission timeout (indicating a path bottleneck) and
+--  all others events (indicating a sender bottleneck).
+--
+--  These instruments SHOULD be updated every time the TCP
+--  output routine stops sending data.  The elapsed time since
+--  the previous stop is accumulated into the appropriate
+--  object as determined by the previous stop reason (e.g.,
+--  stop state).  The current stop reason determines which timer
+--  will be updated the next time TCP output stops.
+--
+--  Since there is no explicit stop at the beginning of a
+--  timeout, it is necessary to retroactively reclassify the
+--  previous stop as 'Congestion Limited'.
+--
+
+tcpEStatsPerfSndLimTransRwin  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of transitions into the 'Receiver Limited' state
+        from either the 'Congestion Limited' or 'Sender Limited'
+        states.  This state is entered whenever TCP transmission
+        stops because the sender has filled the announced receiver
+        window, i.e., when SND.NXT has advanced to SND.UNA +
+        SND.WND - 1 as described in RFC 793."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsPerfEntry 31 }
+
+tcpEStatsPerfSndLimTransCwnd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of transitions into the 'Congestion Limited'
+        state from either the 'Receiver Limited' or 'Sender
+        Limited' states.  This state is entered whenever TCP
+        transmission stops because the sender has reached some
+        limit defined by congestion control (e.g., cwnd) or other
+        algorithms (retransmission timeouts) designed to control
+        network traffic.  See the definition of 'CONGESTION WINDOW'
+
+        in RFC 2581."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPerfEntry 32 }
+
+tcpEStatsPerfSndLimTransSnd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of transitions into the 'Sender Limited' state
+        from either the 'Receiver Limited' or 'Congestion Limited'
+        states.  This state is entered whenever TCP transmission
+        stops due to some sender limit such as running out of
+        application data or other resources and the Karn algorithm.
+        When TCP stops sending data for any reason, which cannot be
+        classified as Receiver Limited or Congestion Limited, it
+        MUST be treated as Sender Limited."
+    ::= { tcpEStatsPerfEntry 33 }
+
+tcpEStatsPerfSndLimTimeRwin  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The cumulative time spent in the 'Receiver Limited' state.
+        See tcpEStatsPerfSndLimTransRwin."
+    ::= { tcpEStatsPerfEntry 34 }
+
+tcpEStatsPerfSndLimTimeCwnd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The cumulative time spent in the 'Congestion Limited'
+        state.  See tcpEStatsPerfSndLimTransCwnd.  When there is a
+        retransmission timeout, it SHOULD be counted in
+        tcpEStatsPerfSndLimTimeCwnd (and not the cumulative time
+        for some other state.)"
+    ::= { tcpEStatsPerfEntry 35 }
+
+tcpEStatsPerfSndLimTimeSnd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The cumulative time spent in the 'Sender Limited' state.
+        See tcpEStatsPerfSndLimTransSnd."
+    ::= { tcpEStatsPerfEntry 36 }
+
+-- ================================================================
+--
+-- Statistics for diagnosing path problems
+--
+
+tcpEStatsPathTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsPathEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains objects that can be used to infer
+        detailed behavior of the Internet path, such as the
+        extent that there is reordering, ECN bits, and if
+        RTT fluctuations are correlated to losses.
+
+        Entries are retained in this table for the number of
+        seconds indicated by the tcpEStatsConnTableLatency
+        object, after the TCP connection first enters the closed
+        state."
+    ::= { tcpEStats 4 }
+
+tcpEStatsPathEntry  OBJECT-TYPE
+    SYNTAX       TcpEStatsPathEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in this table has information about the
+        characteristics of each active and recently closed TCP
+        connection."
+   INDEX { tcpEStatsConnectIndex }
+   ::= { tcpEStatsPathTable 1 }
+
+TcpEStatsPathEntry ::= SEQUENCE {
+
+        tcpEStatsPathRetranThresh           Gauge32,
+        tcpEStatsPathNonRecovDAEpisodes     ZeroBasedCounter32,
+        tcpEStatsPathSumOctetsReordered     ZeroBasedCounter32,
+        tcpEStatsPathNonRecovDA             ZeroBasedCounter32,
+        tcpEStatsPathSampleRTT              Gauge32,
+        tcpEStatsPathRTTVar                 Gauge32,
+        tcpEStatsPathMaxRTT                 Gauge32,
+        tcpEStatsPathMinRTT                 Gauge32,
+        tcpEStatsPathSumRTT                 ZeroBasedCounter32,
+        tcpEStatsPathHCSumRTT               ZeroBasedCounter64,
+        tcpEStatsPathCountRTT               ZeroBasedCounter32,
+        tcpEStatsPathMaxRTO                 Gauge32,
+        tcpEStatsPathMinRTO                 Gauge32,
+        tcpEStatsPathIpTtl                  Unsigned32,
+        tcpEStatsPathIpTosIn                OCTET STRING,
+        tcpEStatsPathIpTosOut               OCTET STRING,
+        tcpEStatsPathPreCongSumCwnd         ZeroBasedCounter32,
+        tcpEStatsPathPreCongSumRTT          ZeroBasedCounter32,
+        tcpEStatsPathPostCongSumRTT         ZeroBasedCounter32,
+        tcpEStatsPathPostCongCountRTT       ZeroBasedCounter32,
+        tcpEStatsPathECNsignals             ZeroBasedCounter32,
+        tcpEStatsPathDupAckEpisodes         ZeroBasedCounter32,
+        tcpEStatsPathRcvRTT                 Gauge32,
+        tcpEStatsPathDupAcksOut             ZeroBasedCounter32,
+        tcpEStatsPathCERcvd                 ZeroBasedCounter32,
+        tcpEStatsPathECESent                ZeroBasedCounter32
+    }
+
+--
+--  The following optional objects can be used to infer segment
+--  reordering on the path from the local sender to the remote
+--  receiver.
+--
+
+tcpEStatsPathRetranThresh  OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of duplicate acknowledgments required to trigger
+        Fast Retransmit.  Note that although this is constant in
+        traditional Reno TCP implementations, it is adaptive in
+        many newer TCPs."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPathEntry 1 }
+
+tcpEStatsPathNonRecovDAEpisodes  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of duplicate acknowledgment episodes that did
+        not trigger a Fast Retransmit because ACK advanced prior to
+        the number of duplicate acknowledgments reaching
+        RetranThresh.
+
+        In many implementations this is the number of times the
+        'dupacks' counter is set to zero when it is non-zero but
+        less than RetranThresh.
+
+        Note that the change in tcpEStatsPathNonRecovDAEpisodes
+        divided by the change in tcpEStatsPerfDataSegsOut is an
+        estimate of the frequency of data reordering on the forward
+        path over some interval."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPathEntry 2 }
+
+tcpEStatsPathSumOctetsReordered  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The sum of the amounts SND.UNA advances on the
+        acknowledgment which ends a dup-ack episode without a
+        retransmission.
+
+        Note the change in tcpEStatsPathSumOctetsReordered divided
+        by the change in tcpEStatsPathNonRecovDAEpisodes is an
+        estimates of the average reordering distance, over some
+        interval."
+    ::= { tcpEStatsPathEntry 3 }
+
+tcpEStatsPathNonRecovDA  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Duplicate acks (or SACKS) that did not trigger a Fast
+        Retransmit because ACK advanced prior to the number of
+        duplicate acknowledgments reaching RetranThresh.
+
+        In many implementations, this is the sum of the 'dupacks'
+        counter, just before it is set to zero because ACK advanced
+        without a Fast Retransmit.
+
+        Note that the change in tcpEStatsPathNonRecovDA divided by
+        the change in tcpEStatsPathNonRecovDAEpisodes is an
+        estimate of the average reordering distance in segments
+        over some interval."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPathEntry 4 }
+
+--
+--  The following optional objects instrument the round trip
+--  time estimator and the retransmission timeout timer.
+--
+
+tcpEStatsPathSampleRTT  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The most recent raw round trip time measurement used in
+        calculation of the RTO."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 11 }
+
+tcpEStatsPathRTTVar  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The round trip time variation used in calculation of the
+        RTO.  See RTTVAR in [RFC2988]."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 12 }
+
+tcpEStatsPathMaxRTT  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum sampled round trip time."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 13 }
+
+tcpEStatsPathMinRTT  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The minimum sampled round trip time."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 14 }
+
+tcpEStatsPathSumRTT  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The sum of all sampled round trip times.
+
+        Note that the change in tcpEStatsPathSumRTT divided by the
+        change in tcpEStatsPathCountRTT is the mean RTT, uniformly
+        averaged over an enter interval."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 15 }
+
+tcpEStatsPathHCSumRTT  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter64
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The sum of all sampled round trip times, on all systems
+        that implement multiple concurrent RTT measurements.
+
+        Note that the change in tcpEStatsPathHCSumRTT divided by
+        the change in tcpEStatsPathCountRTT is the mean RTT,
+        uniformly averaged over an enter interval."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 16 }
+
+tcpEStatsPathCountRTT  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of round trip time samples included in
+        tcpEStatsPathSumRTT and tcpEStatsPathHCSumRTT."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 17 }
+
+tcpEStatsPathMaxRTO  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum value of the retransmit timer RTO."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 18 }
+
+tcpEStatsPathMinRTO  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The minimum value of the retransmit timer RTO."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsPathEntry 19 }
+
+--
+--  The following optional objects provide information about
+--  how TCP is using the IP layer.
+--
+
+tcpEStatsPathIpTtl  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of the TTL field carried in the most recently
+        received IP header.  This is sometimes useful to detect
+        changing or unstable routes."
+    REFERENCE
+       "RFC 791, Internet Protocol"
+    ::= { tcpEStatsPathEntry 20 }
+
+tcpEStatsPathIpTosIn  OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of the IPv4 Type of Service octet, or the IPv6
+        traffic class octet, carried in the most recently received
+        IP header.
+
+        This is useful to diagnose interactions between TCP and any
+        IP layer packet scheduling and delivery policy, which might
+        be in effect to implement Diffserv."
+    REFERENCE
+       "RFC 3260, New Terminology and Clarifications for Diffserv"
+    ::= { tcpEStatsPathEntry 21 }
+
+tcpEStatsPathIpTosOut  OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE(1))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of the IPv4 Type Of Service octet, or the IPv6
+        traffic class octet, carried in the most recently
+        transmitted IP header.
+
+        This is useful to diagnose interactions between TCP and any
+        IP layer packet scheduling and delivery policy, which might
+        be in effect to implement Diffserv."
+    REFERENCE
+       "RFC 3260, New Terminology and Clarifications for Diffserv"
+    ::= { tcpEStatsPathEntry 22 }
+
+--
+--  The following optional objects characterize the congestion
+--  feedback signals by collecting statistics on how the
+--  congestion events are correlated to losses, changes in RTT
+--  and other protocol events.
+--
+
+tcpEStatsPathPreCongSumCwnd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The sum of the values of the congestion window, in octets,
+        captured each time a congestion signal is received.  This
+        MUST be updated each time tcpEStatsPerfCongSignals is
+        incremented, such that the change in
+        tcpEStatsPathPreCongSumCwnd divided by the change in
+        tcpEStatsPerfCongSignals is the average window (over some
+        interval) just prior to a congestion signal."
+    ::= { tcpEStatsPathEntry 23 }
+
+tcpEStatsPathPreCongSumRTT  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Sum of the last sample of the RTT (tcpEStatsPathSampleRTT)
+        prior to the received congestion signals.  This MUST be
+        updated each time tcpEStatsPerfCongSignals is incremented,
+        such that the change in tcpEStatsPathPreCongSumRTT divided by
+        the change in tcpEStatsPerfCongSignals is the average RTT
+        (over some interval) just prior to a congestion signal."
+    ::= { tcpEStatsPathEntry 24 }
+
+tcpEStatsPathPostCongSumRTT  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Sum of the first sample of the RTT (tcpEStatsPathSampleRTT)
+        following each congestion signal.  Such that the change in
+        tcpEStatsPathPostCongSumRTT divided by the change in
+        tcpEStatsPathPostCongCountRTT is the average RTT (over some
+        interval) just after a congestion signal."
+    ::= { tcpEStatsPathEntry 25 }
+
+tcpEStatsPathPostCongCountRTT  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "milliseconds"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of RTT samples included in
+        tcpEStatsPathPostCongSumRTT such that the change in
+        tcpEStatsPathPostCongSumRTT divided by the change in
+        tcpEStatsPathPostCongCountRTT is the average RTT (over some
+        interval) just after a congestion signal."
+    ::= { tcpEStatsPathEntry 26 }
+
+--
+--  The following optional objects can be used to detect other
+--  types of non-loss congestion signals such as source quench
+--  or ECN.
+--
+
+tcpEStatsPathECNsignals  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of congestion signals delivered to the TCP
+        sender via explicit congestion notification (ECN).  This is
+        typically the number of segments bearing Echo Congestion
+
+        Experienced (ECE) bits, but
+        should also include segments failing the ECN nonce check or
+        other explicit congestion signals."
+    REFERENCE
+       "RFC 3168, The Addition of Explicit Congestion Notification
+        (ECN) to IP"
+    ::= { tcpEStatsPathEntry 27 }
+
+--
+--  The following optional objects are receiver side
+--  instruments of the path from the sender to the receiver.  In
+--  general, the receiver has less information about the state
+--  of the path because the receiver does not have a robust
+--  mechanism to infer the sender's actions.
+--
+
+tcpEStatsPathDupAckEpisodes  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of Duplicate Acks Sent when prior Ack was not
+        duplicate.  This is the number of times that a contiguous
+        series of duplicate acknowledgments have been sent.
+
+        This is an indication of the number of data segments lost
+        or reordered on the path from the remote TCP endpoint to
+        the near TCP endpoint."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPathEntry 28 }
+
+tcpEStatsPathRcvRTT  OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The receiver's estimate of the Path RTT.
+
+        Adaptive receiver window algorithms depend on the receiver
+        to having a good estimate of the path RTT."
+    ::= { tcpEStatsPathEntry 29 }
+
+tcpEStatsPathDupAcksOut  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of duplicate ACKs sent.  The ratio of the change
+        in tcpEStatsPathDupAcksOut to the change in
+        tcpEStatsPathDupAckEpisodes is an indication of reorder or
+        recovery distance over some interval."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsPathEntry 30 }
+
+tcpEStatsPathCERcvd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of segments received with IP headers bearing
+        Congestion Experienced (CE) markings."
+    REFERENCE
+       "RFC 3168, The Addition of Explicit Congestion Notification
+        (ECN) to IP"
+    ::= { tcpEStatsPathEntry 31 }
+
+tcpEStatsPathECESent  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Number of times the Echo Congestion Experienced (ECE) bit
+        in the TCP header has been set (transitioned from 0 to 1),
+        due to a Congestion Experienced (CE) marking on an IP
+        header.  Note that ECE can be set and reset only once per
+        RTT, while CE can be set on many segments per RTT."
+    REFERENCE
+       "RFC 3168, The Addition of Explicit Congestion Notification
+        (ECN) to IP"
+    ::= { tcpEStatsPathEntry 32 }
+
+-- ================================================================
+--
+-- Statistics for diagnosing stack algorithms
+--
+
+tcpEStatsStackTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsStackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains objects that are most useful for
+        determining how well some of the TCP control
+        algorithms are coping with this particular
+
+        path.
+
+        Entries are retained in this table for the number of
+        seconds indicated by the tcpEStatsConnTableLatency
+        object, after the TCP connection first enters the closed
+        state."
+    ::= { tcpEStats 5 }
+
+tcpEStatsStackEntry  OBJECT-TYPE
+    SYNTAX       TcpEStatsStackEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in this table has information about the
+        characteristics of each active and recently closed TCP
+        connection."
+   INDEX { tcpEStatsConnectIndex }
+   ::= { tcpEStatsStackTable 1 }
+
+TcpEStatsStackEntry ::= SEQUENCE {
+
+        tcpEStatsStackActiveOpen            TruthValue,
+        tcpEStatsStackMSSSent               Unsigned32,
+        tcpEStatsStackMSSRcvd               Unsigned32,
+        tcpEStatsStackWinScaleSent          Integer32,
+        tcpEStatsStackWinScaleRcvd          Integer32,
+        tcpEStatsStackTimeStamps            TcpEStatsNegotiated,
+        tcpEStatsStackECN                   TcpEStatsNegotiated,
+        tcpEStatsStackWillSendSACK          TcpEStatsNegotiated,
+        tcpEStatsStackWillUseSACK           TcpEStatsNegotiated,
+        tcpEStatsStackState                 INTEGER,
+        tcpEStatsStackNagle                 TruthValue,
+        tcpEStatsStackMaxSsCwnd             Gauge32,
+        tcpEStatsStackMaxCaCwnd             Gauge32,
+        tcpEStatsStackMaxSsthresh           Gauge32,
+        tcpEStatsStackMinSsthresh           Gauge32,
+        tcpEStatsStackInRecovery            INTEGER,
+        tcpEStatsStackDupAcksIn             ZeroBasedCounter32,
+        tcpEStatsStackSpuriousFrDetected    ZeroBasedCounter32,
+        tcpEStatsStackSpuriousRtoDetected   ZeroBasedCounter32,
+        tcpEStatsStackSoftErrors            ZeroBasedCounter32,
+        tcpEStatsStackSoftErrorReason       INTEGER,
+        tcpEStatsStackSlowStart             ZeroBasedCounter32,
+        tcpEStatsStackCongAvoid             ZeroBasedCounter32,
+        tcpEStatsStackOtherReductions       ZeroBasedCounter32,
+        tcpEStatsStackCongOverCount         ZeroBasedCounter32,
+        tcpEStatsStackFastRetran            ZeroBasedCounter32,
+        tcpEStatsStackSubsequentTimeouts    ZeroBasedCounter32,
+        tcpEStatsStackCurTimeoutCount       Gauge32,
+        tcpEStatsStackAbruptTimeouts        ZeroBasedCounter32,
+        tcpEStatsStackSACKsRcvd             ZeroBasedCounter32,
+        tcpEStatsStackSACKBlocksRcvd        ZeroBasedCounter32,
+        tcpEStatsStackSendStall             ZeroBasedCounter32,
+        tcpEStatsStackDSACKDups             ZeroBasedCounter32,
+        tcpEStatsStackMaxMSS                Gauge32,
+        tcpEStatsStackMinMSS                Gauge32,
+        tcpEStatsStackSndInitial            Unsigned32,
+        tcpEStatsStackRecInitial            Unsigned32,
+        tcpEStatsStackCurRetxQueue          Gauge32,
+        tcpEStatsStackMaxRetxQueue          Gauge32,
+        tcpEStatsStackCurReasmQueue         Gauge32,
+        tcpEStatsStackMaxReasmQueue         Gauge32
+    }
+
+--
+--  The following objects reflect TCP options carried on the
+--  SYN or SYN-ACK.  These options are used to provide
+--  additional protocol parameters or to enable various
+--  optional TCP features or algorithms.
+--
+--  Except as noted, the TCP protocol does not permit these
+--  options to change after the SYN exchange.
+--
+
+tcpEStatsStackActiveOpen  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "True(1) if the local connection traversed the SYN-SENT
+        state, else false(2)."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsStackEntry 1 }
+
+tcpEStatsStackMSSSent  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value sent in an MSS option, or zero if none."
+    REFERENCE
+       "RFC 1122, Requirements for Internet Hosts - Communication
+        Layers"
+    ::= { tcpEStatsStackEntry 2 }
+
+tcpEStatsStackMSSRcvd  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value received in an MSS option, or zero if none."
+    REFERENCE
+       "RFC 1122, Requirements for Internet Hosts - Communication
+        Layers"
+    ::= { tcpEStatsStackEntry 3 }
+
+tcpEStatsStackWinScaleSent  OBJECT-TYPE
+    SYNTAX          Integer32 (-1..14)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of the transmitted window scale option if one was
+        sent; otherwise, a value of -1.
+
+        Note that if both tcpEStatsStackWinScaleSent and
+        tcpEStatsStackWinScaleRcvd are not -1, then Rcv.Wind.Scale
+        will be the same as this value and used to scale receiver
+        window announcements from the local host to the remote
+        host."
+    REFERENCE
+       "RFC 1323, TCP Extensions for High Performance"
+    ::= { tcpEStatsStackEntry 4 }
+
+tcpEStatsStackWinScaleRcvd  OBJECT-TYPE
+    SYNTAX          Integer32 (-1..14)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of the received window scale option if one was
+        received; otherwise, a value of -1.
+
+        Note that if both tcpEStatsStackWinScaleSent and
+        tcpEStatsStackWinScaleRcvd are not -1, then Snd.Wind.Scale
+        will be the same as this value and used to scale receiver
+        window announcements from the remote host to the local
+        host."
+    REFERENCE
+       "RFC 1323, TCP Extensions for High Performance"
+    ::= { tcpEStatsStackEntry 5 }
+
+tcpEStatsStackTimeStamps  OBJECT-TYPE
+    SYNTAX          TcpEStatsNegotiated
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Enabled(1) if TCP timestamps have been negotiated on,
+        selfDisabled(2) if they are disabled or not implemented on
+        the local host, or peerDisabled(3) if not negotiated by the
+        remote hosts."
+    REFERENCE
+       "RFC 1323, TCP Extensions for High Performance"
+    ::= { tcpEStatsStackEntry 6 }
+
+tcpEStatsStackECN  OBJECT-TYPE
+    SYNTAX          TcpEStatsNegotiated
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Enabled(1) if Explicit Congestion Notification (ECN) has
+        been negotiated on, selfDisabled(2) if it is disabled or
+        not implemented on the local host, or peerDisabled(3) if
+        not negotiated by the remote hosts."
+    REFERENCE
+       "RFC 3168, The Addition of Explicit Congestion Notification
+        (ECN) to IP"
+    ::= { tcpEStatsStackEntry 7 }
+
+tcpEStatsStackWillSendSACK  OBJECT-TYPE
+    SYNTAX          TcpEStatsNegotiated
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Enabled(1) if the local host will send SACK options,
+        selfDisabled(2) if SACK is disabled or not implemented on
+        the local host, or peerDisabled(3) if the remote host did
+        not send the SACK-permitted option.
+
+        Note that SACK negotiation is not symmetrical.  SACK can
+        enabled on one side of the connection and not the other."
+    REFERENCE
+       "RFC 2018, TCP Selective Acknowledgement Options"
+    ::= { tcpEStatsStackEntry 8 }
+
+tcpEStatsStackWillUseSACK  OBJECT-TYPE
+    SYNTAX          TcpEStatsNegotiated
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Enabled(1) if the local host will process SACK options,
+        selfDisabled(2) if SACK is disabled or not implemented on
+        the local host, or peerDisabled(3) if the remote host sends
+
+        duplicate ACKs without SACK options, or the local host
+        otherwise decides not to process received SACK options.
+
+        Unlike other TCP options, the remote data receiver cannot
+        explicitly indicate if it is able to generate SACK options.
+        When sending data, the local host has to deduce if the
+        remote receiver is sending SACK options.  This object can
+        transition from Enabled(1) to peerDisabled(3) after the SYN
+        exchange.
+
+        Note that SACK negotiation is not symmetrical.  SACK can
+        enabled on one side of the connection and not the other."
+    REFERENCE
+       "RFC 2018, TCP Selective Acknowledgement Options"
+    ::= { tcpEStatsStackEntry 9 }
+
+--
+--  The following two objects reflect the current state of the
+--  connection.
+--
+
+tcpEStatsStackState  OBJECT-TYPE
+    SYNTAX          INTEGER {
+       tcpESStateClosed(1),
+       tcpESStateListen(2),
+       tcpESStateSynSent(3),
+       tcpESStateSynReceived(4),
+       tcpESStateEstablished(5),
+       tcpESStateFinWait1(6),
+       tcpESStateFinWait2(7),
+       tcpESStateCloseWait(8),
+       tcpESStateLastAck(9),
+       tcpESStateClosing(10),
+       tcpESStateTimeWait(11),
+       tcpESStateDeleteTcb(12)
+    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "An integer value representing the connection state from the
+        TCP State Transition Diagram.
+
+        The value listen(2) is included only for parallelism to the
+        old tcpConnTable, and SHOULD NOT be used because the listen
+        state in managed by the tcpListenerTable.
+
+        The value DeleteTcb(12) is included only for parallelism to
+        the tcpConnTable mechanism for terminating connections,
+        although this table does not permit writing."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsStackEntry 10 }
+
+tcpEStatsStackNagle  OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "True(1) if the Nagle algorithm is being used, else
+        false(2)."
+    REFERENCE
+       "RFC 1122, Requirements for Internet Hosts - Communication
+        Layers"
+    ::= { tcpEStatsStackEntry 11 }
+
+--
+--  The following objects instrument the overall operation of
+--  TCP congestion control and data retransmissions.  These
+--  instruments are sufficient to fit the actual performance to
+--  an updated macroscopic performance model [RFC2581] [Mat97]
+--  [Pad98].
+--
+
+tcpEStatsStackMaxSsCwnd  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum congestion window used during Slow Start, in
+        octets."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 12 }
+
+tcpEStatsStackMaxCaCwnd  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum congestion window used during Congestion
+        Avoidance, in octets."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 13 }
+
+tcpEStatsStackMaxSsthresh  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum slow start threshold, excluding the initial
+        value."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 14 }
+
+tcpEStatsStackMinSsthresh  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The minimum slow start threshold."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 15 }
+
+tcpEStatsStackInRecovery  OBJECT-TYPE
+    SYNTAX          INTEGER {
+       tcpESDataContiguous(1),
+       tcpESDataUnordered(2),
+       tcpESDataRecovery(3)
+    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "An integer value representing the state of the loss
+        recovery for this connection.
+
+        tcpESDataContiguous(1) indicates that the remote receiver
+        is reporting contiguous data (no duplicate acknowledgments
+        or SACK options) and that there are no unacknowledged
+        retransmissions.
+
+        tcpESDataUnordered(2) indicates that the remote receiver is
+        reporting missing or out-of-order data (e.g., sending
+        duplicate acknowledgments or SACK options) and that there
+        are no unacknowledged retransmissions (because the missing
+        data has not yet been retransmitted).
+
+        tcpESDataRecovery(3) indicates that the sender has
+        outstanding retransmitted data that is still
+
+        unacknowledged."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 16 }
+
+tcpEStatsStackDupAcksIn  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of duplicate ACKs received."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 17 }
+
+tcpEStatsStackSpuriousFrDetected  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of acknowledgments reporting out-of-order
+        segments after the Fast Retransmit algorithm has already
+        retransmitted the segments. (For example as detected by the
+        Eifel algorithm).'"
+    REFERENCE
+       "RFC 3522, The Eifel Detection Algorithm for TCP"
+    ::= { tcpEStatsStackEntry 18 }
+
+tcpEStatsStackSpuriousRtoDetected  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of acknowledgments reporting segments that have
+        already been retransmitted due to a Retransmission Timeout."
+    ::= { tcpEStatsStackEntry 19 }
+
+--
+--  The following optional objects instrument unusual protocol
+--  events that probably indicate implementation problems in
+--  the protocol or path.
+--
+
+tcpEStatsStackSoftErrors  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of segments that fail various consistency tests
+        during TCP input processing.  Soft errors might cause the
+        segment to be discarded but some do not.  Some of these soft
+        errors cause the generation of a TCP acknowledgment, while
+        others are silently discarded."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsStackEntry 21 }
+
+tcpEStatsStackSoftErrorReason  OBJECT-TYPE
+    SYNTAX          INTEGER {
+       belowDataWindow(1),
+       aboveDataWindow(2),
+       belowAckWindow(3),
+       aboveAckWindow(4),
+       belowTSWindow(5),
+       aboveTSWindow(6),
+       dataCheckSum(7),
+       otherSoftError(8)
+    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "This object identifies which consistency test most recently
+        failed during TCP input processing.  This object SHOULD be
+        set every time tcpEStatsStackSoftErrors is incremented.  The
+        codes are as follows:
+
+        belowDataWindow(1) - All data in the segment is below
+        SND.UNA. (Normal for keep-alives and zero window probes).
+
+        aboveDataWindow(2) - Some data in the segment is above
+        SND.WND. (Indicates an implementation bug or possible
+        attack).
+
+        belowAckWindow(3) - ACK below SND.UNA. (Indicates that the
+        return path is reordering ACKs)
+
+        aboveAckWindow(4) - An ACK for data that we have not sent.
+        (Indicates an implementation bug or possible attack).
+
+        belowTSWindow(5) - TSecr on the segment is older than the
+        current TS.Recent (Normal for the rare case where PAWS
+        detects data reordered by the network).
+
+        aboveTSWindow(6) - TSecr on the segment is newer than the
+        current TS.Recent. (Indicates an implementation bug or
+        possible attack).
+
+        dataCheckSum(7) - Incorrect checksum.  Note that this value
+        is intrinsically fragile, because the header fields used to
+        identify the connection may have been corrupted.
+
+        otherSoftError(8) - All other soft errors not listed
+        above."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsStackEntry 22 }
+
+--
+--  The following optional objects expose the detailed
+--  operation of the congestion control algorithms.
+--
+
+tcpEStatsStackSlowStart  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of times the congestion window has been
+        increased by the Slow Start algorithm."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 23 }
+
+tcpEStatsStackCongAvoid  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of times the congestion window has been
+        increased by the Congestion Avoidance algorithm."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 24 }
+
+tcpEStatsStackOtherReductions  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of congestion window reductions made as a result
+        of anything other than AIMD congestion control algorithms.
+        Examples of non-multiplicative window reductions include
+        Congestion Window Validation [RFC2861] and experimental
+        algorithms such as Vegas [Bra94].
+
+        All window reductions MUST be counted as either
+        tcpEStatsPerfCongSignals or tcpEStatsStackOtherReductions."
+    REFERENCE
+       "RFC 2861, TCP Congestion Window Validation"
+    ::= { tcpEStatsStackEntry 25 }
+
+tcpEStatsStackCongOverCount  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of congestion events that were 'backed out' of
+        the congestion control state machine such that the
+        congestion window was restored to a prior value.  This can
+        happen due to the Eifel algorithm [RFC3522] or other
+        algorithms that can be used to detect and cancel spurious
+        invocations of the Fast Retransmit Algorithm.
+
+        Although it may be feasible to undo the effects of spurious
+        invocation of the Fast Retransmit congestion events cannot
+        easily be backed out of tcpEStatsPerfCongSignals and
+        tcpEStatsPathPreCongSumCwnd, etc."
+    REFERENCE
+       "RFC 3522, The Eifel Detection Algorithm for TCP"
+    ::= { tcpEStatsStackEntry 26 }
+
+tcpEStatsStackFastRetran  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of invocations of the Fast Retransmit algorithm."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 27 }
+
+tcpEStatsStackSubsequentTimeouts  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of times the retransmit timeout has expired after
+        the RTO has been doubled.  See Section 5.5 of RFC 2988."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsStackEntry 28 }
+
+tcpEStatsStackCurTimeoutCount  OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current number of times the retransmit timeout has
+        expired without receiving an acknowledgment for new data.
+        tcpEStatsStackCurTimeoutCount is reset to zero when new
+        data is acknowledged and incremented for each invocation of
+        Section 5.5 of RFC 2988."
+    REFERENCE
+       "RFC 2988, Computing TCP's Retransmission Timer"
+    ::= { tcpEStatsStackEntry 29 }
+
+tcpEStatsStackAbruptTimeouts  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of timeouts that occurred without any
+        immediately preceding duplicate acknowledgments or other
+        indications of congestion.  Abrupt Timeouts indicate that
+        the path lost an entire window of data or acknowledgments.
+
+        Timeouts that are preceded by duplicate acknowledgments or
+        other congestion signals (e.g., ECN) are not counted as
+        abrupt, and might have been avoided by a more sophisticated
+        Fast Retransmit algorithm."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsStackEntry 30 }
+
+tcpEStatsStackSACKsRcvd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of SACK options received."
+    REFERENCE
+       "RFC 2018, TCP Selective Acknowledgement Options"
+    ::= { tcpEStatsStackEntry 31 }
+
+tcpEStatsStackSACKBlocksRcvd  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of SACK blocks received (within SACK options)."
+    REFERENCE
+       "RFC 2018, TCP Selective Acknowledgement Options"
+    ::= { tcpEStatsStackEntry 32 }
+
+tcpEStatsStackSendStall  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of interface stalls or other sender local
+        resource limitations that are treated as congestion
+        signals."
+    ::= { tcpEStatsStackEntry 33 }
+
+tcpEStatsStackDSACKDups  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of duplicate segments reported to the local host
+        by D-SACK blocks."
+    REFERENCE
+       "RFC 2883, An Extension to the Selective Acknowledgement
+        (SACK) Option for TCP"
+    ::= { tcpEStatsStackEntry 34 }
+
+--
+--  The following optional objects instrument path MTU
+--  discovery.
+--
+
+tcpEStatsStackMaxMSS  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum MSS, in octets."
+    REFERENCE
+       "RFC 1191, Path MTU discovery"
+    ::= { tcpEStatsStackEntry 35 }
+
+tcpEStatsStackMinMSS  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The minimum MSS, in octets."
+    REFERENCE
+       "RFC 1191, Path MTU discovery"
+    ::= { tcpEStatsStackEntry 36 }
+
+--
+--  The following optional initial value objects are useful for
+--  conformance testing instruments on application progress and
+--  consumed network resources.
+--
+
+tcpEStatsStackSndInitial  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Initial send sequence number.  Note that by definition
+        tcpEStatsStackSndInitial never changes for a given
+        connection."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsStackEntry 37 }
+
+tcpEStatsStackRecInitial  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "Initial receive sequence number.  Note that by definition
+        tcpEStatsStackRecInitial never changes for a given
+        connection."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsStackEntry 38 }
+
+--
+--  The following optional objects instrument the senders
+--  buffer usage, including any buffering in the application
+--  interface to TCP and the retransmit queue.  All 'buffer
+--  memory' instruments are assumed to include OS data
+--  structure overhead.
+--
+
+tcpEStatsStackCurRetxQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current number of octets of data occupying the
+        retransmit queue."
+    ::= { tcpEStatsStackEntry 39 }
+
+tcpEStatsStackMaxRetxQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum number of octets of data occupying the
+        retransmit queue."
+    ::= { tcpEStatsStackEntry 40 }
+
+tcpEStatsStackCurReasmQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current number of octets of sequence space spanned by
+        the reassembly queue.  This is generally the difference
+        between rcv.nxt and the sequence number of the right most
+        edge of the reassembly queue."
+    ::= { tcpEStatsStackEntry 41 }
+
+tcpEStatsStackMaxReasmQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum value of tcpEStatsStackCurReasmQueue"
+    ::= { tcpEStatsStackEntry 42 }
+
+-- ================================================================
+--
+-- Statistics for diagnosing interactions between
+-- applications and TCP.
+--
+
+tcpEStatsAppTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsAppEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains objects that are useful for
+        determining if the application using TCP is
+
+        limiting TCP performance.
+
+        Entries are retained in this table for the number of
+        seconds indicated by the tcpEStatsConnTableLatency
+        object, after the TCP connection first enters the closed
+        state."
+    ::= { tcpEStats 6 }
+
+tcpEStatsAppEntry  OBJECT-TYPE
+    SYNTAX       TcpEStatsAppEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in this table has information about the
+        characteristics of each active and recently closed TCP
+        connection."
+   INDEX { tcpEStatsConnectIndex }
+   ::= { tcpEStatsAppTable 1 }
+
+TcpEStatsAppEntry ::= SEQUENCE {
+
+        tcpEStatsAppSndUna                  Counter32,
+        tcpEStatsAppSndNxt                  Unsigned32,
+        tcpEStatsAppSndMax                  Counter32,
+        tcpEStatsAppThruOctetsAcked         ZeroBasedCounter32,
+        tcpEStatsAppHCThruOctetsAcked       ZeroBasedCounter64,
+        tcpEStatsAppRcvNxt                  Counter32,
+        tcpEStatsAppThruOctetsReceived      ZeroBasedCounter32,
+        tcpEStatsAppHCThruOctetsReceived    ZeroBasedCounter64,
+        tcpEStatsAppCurAppWQueue            Gauge32,
+        tcpEStatsAppMaxAppWQueue            Gauge32,
+        tcpEStatsAppCurAppRQueue            Gauge32,
+        tcpEStatsAppMaxAppRQueue            Gauge32
+    }
+
+--
+--  The following objects provide throughput statistics for the
+--  connection including sequence numbers and elapsed
+--  application data.  These permit direct observation of the
+--  applications progress, in terms of elapsed data delivery
+--  and elapsed time.
+--
+
+tcpEStatsAppSndUna  OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of SND.UNA, the oldest unacknowledged sequence
+        number.
+
+        Note that SND.UNA is a TCP state variable that is congruent
+        to Counter32 semantics."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsAppEntry 1 }
+
+tcpEStatsAppSndNxt  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of SND.NXT, the next sequence number to be sent.
+        Note that tcpEStatsAppSndNxt is not monotonic (and thus not
+        a counter) because TCP sometimes retransmits lost data by
+        pulling tcpEStatsAppSndNxt back to the missing data."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsAppEntry 2 }
+
+tcpEStatsAppSndMax  OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The farthest forward (right most or largest) SND.NXT value.
+        Note that this will be equal to tcpEStatsAppSndNxt except
+        when tcpEStatsAppSndNxt is pulled back during recovery."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsAppEntry 3 }
+
+tcpEStatsAppThruOctetsAcked  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets for which cumulative acknowledgments
+        have been received.  Note that this will be the sum of
+        changes to tcpEStatsAppSndUna."
+    ::= { tcpEStatsAppEntry 4 }
+
+tcpEStatsAppHCThruOctetsAcked  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter64
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets for which cumulative acknowledgments
+        have been received, on systems that can receive more than
+        10 million bits per second.  Note that this will be the sum
+        of changes in tcpEStatsAppSndUna."
+    ::= { tcpEStatsAppEntry 5 }
+
+tcpEStatsAppRcvNxt  OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The value of RCV.NXT.  The next sequence number expected on
+        an incoming segment, and the left or lower edge of the
+        receive window.
+
+        Note that RCV.NXT is a TCP state variable that is congruent
+        to Counter32 semantics."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsAppEntry 6 }
+
+tcpEStatsAppThruOctetsReceived  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets for which cumulative acknowledgments
+        have been sent.  Note that this will be the sum of changes
+        to tcpEStatsAppRcvNxt."
+    ::= { tcpEStatsAppEntry 7 }
+
+tcpEStatsAppHCThruOctetsReceived  OBJECT-TYPE
+    SYNTAX          ZeroBasedCounter64
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The number of octets for which cumulative acknowledgments
+        have been sent, on systems that can transmit more than 10
+        million bits per second.  Note that this will be the sum of
+        changes in tcpEStatsAppRcvNxt."
+    ::= { tcpEStatsAppEntry 8 }
+
+tcpEStatsAppCurAppWQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current number of octets of application data buffered
+        by TCP, pending first transmission, i.e., to the left of
+        SND.NXT or SndMax.  This data will generally be transmitted
+        (and SND.NXT advanced to the left) as soon as there is an
+        available congestion window (cwnd) or receiver window
+        (rwin).  This is the amount of data readily available for
+        transmission, without scheduling the application.  TCP
+        performance may suffer if there is insufficient queued
+        write data."
+    ::= { tcpEStatsAppEntry 11 }
+
+tcpEStatsAppMaxAppWQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum number of octets of application data buffered
+        by TCP, pending first transmission.  This is the maximum
+        value of tcpEStatsAppCurAppWQueue.  This pair of objects can
+        be used to determine if insufficient queued data is steady
+        state (suggesting insufficient queue space) or transient
+        (suggesting insufficient application performance or
+        excessive CPU load or scheduler latency)."
+    ::= { tcpEStatsAppEntry 12 }
+
+tcpEStatsAppCurAppRQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The current number of octets of application data that has
+        been acknowledged by TCP but not yet delivered to the
+        application."
+    ::= { tcpEStatsAppEntry 13 }
+
+tcpEStatsAppMaxAppRQueue  OBJECT-TYPE
+    SYNTAX          Gauge32
+    UNITS           "octets"
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+       "The maximum number of octets of application data that has
+        been acknowledged by TCP but not yet delivered to the
+        application."
+    ::= { tcpEStatsAppEntry 14 }
+
+-- ================================================================
+--
+-- Controls for Tuning TCP
+--
+
+tcpEStatsTuneTable    OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TcpEStatsTuneEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains per-connection controls that can
+        be used to work around a number of common problems that
+        plague TCP over some paths.  All can be characterized as
+        limiting the growth of the congestion window so as to
+        prevent TCP from overwhelming some component in the
+        path.
+
+        Entries are retained in this table for the number of
+        seconds indicated by the tcpEStatsConnTableLatency
+        object, after the TCP connection first enters the closed
+        state."
+    ::= { tcpEStats 7 }
+
+tcpEStatsTuneEntry  OBJECT-TYPE
+    SYNTAX       TcpEStatsTuneEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry in this table is a control that can be used to
+        place limits on each active TCP connection."
+   INDEX { tcpEStatsConnectIndex }
+   ::= { tcpEStatsTuneTable 1 }
+
+TcpEStatsTuneEntry ::= SEQUENCE {
+
+        tcpEStatsTuneLimCwnd                Unsigned32,
+        tcpEStatsTuneLimSsthresh            Unsigned32,
+        tcpEStatsTuneLimRwin                Unsigned32,
+        tcpEStatsTuneLimMSS                 Unsigned32
+    }
+
+tcpEStatsTuneLimCwnd  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "octets"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+       "A control to set the maximum congestion window that may be
+        used, in octets."
+    REFERENCE
+       "RFC 2581, TCP Congestion Control"
+    ::= { tcpEStatsTuneEntry 1 }
+
+tcpEStatsTuneLimSsthresh  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "octets"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+       "A control to limit the maximum queue space (in octets) that
+        this TCP connection is likely to occupy during slowstart.
+
+        It can be implemented with the algorithm described in
+        RFC 3742 by setting the max_ssthresh parameter to twice
+        tcpEStatsTuneLimSsthresh.
+
+        This algorithm can be used to overcome some TCP performance
+        problems over network paths that do not have sufficient
+        buffering to withstand the bursts normally present during
+        slowstart."
+    REFERENCE
+       "RFC 3742, Limited Slow-Start for TCP with Large Congestion
+        Windows"
+    ::= { tcpEStatsTuneEntry 2 }
+
+tcpEStatsTuneLimRwin  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "octets"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+       "A control to set the maximum window advertisement that may
+        be sent, in octets."
+    REFERENCE
+       "RFC 793, Transmission Control Protocol"
+    ::= { tcpEStatsTuneEntry 3 }
+
+tcpEStatsTuneLimMSS  OBJECT-TYPE
+    SYNTAX          Unsigned32
+    UNITS           "octets"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+       "A control to limit the maximum segment size in octets, that
+        this TCP connection can use."
+    REFERENCE
+       "RFC 1191, Path MTU discovery"
+    ::= { tcpEStatsTuneEntry 4 }
+
+-- ================================================================
+--
+-- TCP Extended Statistics Notifications Group
+--
+
+tcpEStatsEstablishNotification NOTIFICATION-TYPE
+    OBJECTS     {
+                  tcpEStatsConnectIndex
+                }
+    STATUS      current
+    DESCRIPTION
+        "The indicated connection has been accepted
+        (or alternatively entered the established state)."
+    ::= { tcpEStatsNotifications 1 }
+
+tcpEStatsCloseNotification NOTIFICATION-TYPE
+    OBJECTS     {
+                  tcpEStatsConnectIndex
+                }
+    STATUS      current
+    DESCRIPTION
+        "The indicated connection has left the
+        established state"
+    ::= { tcpEStatsNotifications 2 }
+
+-- ================================================================
+--
+-- Conformance Definitions
+--
+
+   tcpEStatsCompliances   OBJECT IDENTIFIER
+        ::= { tcpEStatsConformance 1 }
+   tcpEStatsGroups        OBJECT IDENTIFIER
+        ::= { tcpEStatsConformance 2 }
+
+--
+-- Compliance Statements
+--
+
+  tcpEStatsCompliance MODULE-COMPLIANCE
+     STATUS current
+     DESCRIPTION
+         "Compliance statement for all systems that implement TCP
+         extended statistics."
+     MODULE -- this module
+         MANDATORY-GROUPS {
+                            tcpEStatsListenerGroup,
+                            tcpEStatsConnectIdGroup,
+                            tcpEStatsPerfGroup,
+                            tcpEStatsPathGroup,
+                            tcpEStatsStackGroup,
+                            tcpEStatsAppGroup
+                          }
+         GROUP tcpEStatsListenerHCGroup
+         DESCRIPTION
+             "This group is mandatory for all systems that can
+              wrap the values of the 32-bit counters in
+              tcpEStatsListenerGroup in less than one hour."
+
+         GROUP tcpEStatsPerfOptionalGroup
+         DESCRIPTION
+             "This group is optional for all systems."
+
+         GROUP tcpEStatsPerfHCGroup
+         DESCRIPTION
+             "This group is mandatory for systems that can
+             wrap the values of the 32-bit counters in
+             tcpEStatsPerfGroup in less than one hour.
+
+             Note that any system that can attain 10 Mb/s
+             can potentially wrap 32-Bit Octet counters in
+             under one hour."
+
+         GROUP tcpEStatsPathOptionalGroup
+         DESCRIPTION
+             "This group is optional for all systems."
+
+         GROUP tcpEStatsPathHCGroup
+         DESCRIPTION
+             "This group is mandatory for systems that can
+             wrap the values of the 32-bit counters in
+             tcpEStatsPathGroup in less than one hour.
+
+             Note that any system that can attain 10 Mb/s
+             can potentially wrap 32-Bit Octet counters in
+             under one hour."
+
+         GROUP tcpEStatsStackOptionalGroup
+         DESCRIPTION
+             "This group is optional for all systems."
+
+         GROUP tcpEStatsAppHCGroup
+         DESCRIPTION
+             "This group is mandatory for systems that can
+             wrap the values of the 32-bit counters in
+             tcpEStatsStackGroup in less than one hour.
+
+             Note that any system that can attain 10 Mb/s
+             can potentially wrap 32-Bit Octet counters in
+             under one hour."
+
+         GROUP tcpEStatsAppOptionalGroup
+         DESCRIPTION
+             "This group is optional for all systems."
+
+         GROUP tcpEStatsTuneOptionalGroup
+         DESCRIPTION
+             "This group is optional for all systems."
+
+         GROUP tcpEStatsNotificationsGroup
+         DESCRIPTION
+             "This group is optional for all systems."
+
+         GROUP tcpEStatsNotificationsCtlGroup
+         DESCRIPTION
+             "This group is mandatory for systems that include the
+              tcpEStatsNotificationGroup."
+   ::= { tcpEStatsCompliances 1 }
+
+-- ================================================================
+--
+-- Units of Conformance
+--
+    tcpEStatsListenerGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsListenerTableLastChange,
+              tcpEStatsListenerStartTime,
+              tcpEStatsListenerSynRcvd,
+              tcpEStatsListenerInitial,
+              tcpEStatsListenerEstablished,
+              tcpEStatsListenerAccepted,
+              tcpEStatsListenerExceedBacklog,
+              tcpEStatsListenerCurConns,
+              tcpEStatsListenerMaxBacklog,
+              tcpEStatsListenerCurBacklog,
+              tcpEStatsListenerCurEstabBacklog
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsListener group includes objects that
+              provide valuable statistics and debugging
+              information for TCP Listeners."
+      ::= { tcpEStatsGroups 1 }
+
+    tcpEStatsListenerHCGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsListenerHCSynRcvd,
+              tcpEStatsListenerHCInitial,
+              tcpEStatsListenerHCEstablished,
+              tcpEStatsListenerHCAccepted,
+              tcpEStatsListenerHCExceedBacklog
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsListenerHC group includes 64-bit
+               counters in tcpEStatsListenerTable."
+      ::= { tcpEStatsGroups 2 }
+
+    tcpEStatsConnectIdGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsConnTableLatency,
+              tcpEStatsConnectIndex
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsConnectId group includes objects that
+              identify TCP connections and control how long TCP
+              connection entries are retained in the tables."
+      ::= { tcpEStatsGroups 3 }
+
+    tcpEStatsPerfGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsPerfSegsOut, tcpEStatsPerfDataSegsOut,
+              tcpEStatsPerfDataOctetsOut,
+              tcpEStatsPerfSegsRetrans,
+              tcpEStatsPerfOctetsRetrans, tcpEStatsPerfSegsIn,
+              tcpEStatsPerfDataSegsIn,
+              tcpEStatsPerfDataOctetsIn,
+              tcpEStatsPerfElapsedSecs,
+              tcpEStatsPerfElapsedMicroSecs,
+              tcpEStatsPerfStartTimeStamp, tcpEStatsPerfCurMSS,
+              tcpEStatsPerfPipeSize, tcpEStatsPerfMaxPipeSize,
+              tcpEStatsPerfSmoothedRTT, tcpEStatsPerfCurRTO,
+              tcpEStatsPerfCongSignals, tcpEStatsPerfCurCwnd,
+              tcpEStatsPerfCurSsthresh, tcpEStatsPerfTimeouts,
+              tcpEStatsPerfCurRwinSent,
+              tcpEStatsPerfMaxRwinSent,
+              tcpEStatsPerfZeroRwinSent,
+              tcpEStatsPerfCurRwinRcvd,
+              tcpEStatsPerfMaxRwinRcvd,
+              tcpEStatsPerfZeroRwinRcvd
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsPerf group includes those objects that
+              provide basic performance data for a TCP connection."
+      ::= { tcpEStatsGroups 4 }
+
+    tcpEStatsPerfOptionalGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsPerfSndLimTransRwin,
+              tcpEStatsPerfSndLimTransCwnd,
+              tcpEStatsPerfSndLimTransSnd,
+              tcpEStatsPerfSndLimTimeRwin,
+              tcpEStatsPerfSndLimTimeCwnd,
+              tcpEStatsPerfSndLimTimeSnd
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsPerf group includes those objects that
+              provide basic performance data for a TCP connection."
+      ::= { tcpEStatsGroups 5 }
+
+    tcpEStatsPerfHCGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsPerfHCDataOctetsOut,
+              tcpEStatsPerfHCDataOctetsIn
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsPerfHC group includes 64-bit
+              counters in the tcpEStatsPerfTable."
+      ::= { tcpEStatsGroups 6 }
+
+    tcpEStatsPathGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsControlPath,
+              tcpEStatsPathRetranThresh,
+              tcpEStatsPathNonRecovDAEpisodes,
+              tcpEStatsPathSumOctetsReordered,
+              tcpEStatsPathNonRecovDA
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsPath group includes objects that
+              control the creation of the tcpEStatsPathTable,
+              and provide information about the path
+              for each TCP connection."
+      ::= { tcpEStatsGroups 7 }
+
+    tcpEStatsPathOptionalGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsPathSampleRTT, tcpEStatsPathRTTVar,
+              tcpEStatsPathMaxRTT, tcpEStatsPathMinRTT,
+              tcpEStatsPathSumRTT, tcpEStatsPathCountRTT,
+              tcpEStatsPathMaxRTO, tcpEStatsPathMinRTO,
+              tcpEStatsPathIpTtl, tcpEStatsPathIpTosIn,
+              tcpEStatsPathIpTosOut,
+              tcpEStatsPathPreCongSumCwnd,
+              tcpEStatsPathPreCongSumRTT,
+              tcpEStatsPathPostCongSumRTT,
+              tcpEStatsPathPostCongCountRTT,
+              tcpEStatsPathECNsignals,
+              tcpEStatsPathDupAckEpisodes, tcpEStatsPathRcvRTT,
+              tcpEStatsPathDupAcksOut, tcpEStatsPathCERcvd,
+              tcpEStatsPathECESent
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsPath group includes objects that
+              provide additional information about the path
+              for each TCP connection."
+      ::= { tcpEStatsGroups 8 }
+
+  tcpEStatsPathHCGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsPathHCSumRTT
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsPathHC group includes 64-bit
+              counters in the tcpEStatsPathTable."
+      ::= { tcpEStatsGroups 9 }
+
+    tcpEStatsStackGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsControlStack,
+              tcpEStatsStackActiveOpen, tcpEStatsStackMSSSent,
+              tcpEStatsStackMSSRcvd, tcpEStatsStackWinScaleSent,
+              tcpEStatsStackWinScaleRcvd,
+              tcpEStatsStackTimeStamps, tcpEStatsStackECN,
+              tcpEStatsStackWillSendSACK,
+              tcpEStatsStackWillUseSACK, tcpEStatsStackState,
+              tcpEStatsStackNagle, tcpEStatsStackMaxSsCwnd,
+              tcpEStatsStackMaxCaCwnd,
+              tcpEStatsStackMaxSsthresh,
+              tcpEStatsStackMinSsthresh,
+              tcpEStatsStackInRecovery, tcpEStatsStackDupAcksIn,
+              tcpEStatsStackSpuriousFrDetected,
+              tcpEStatsStackSpuriousRtoDetected
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsConnState group includes objects that
+              control the creation of the tcpEStatsStackTable,
+              and provide information about the operation of
+              algorithms used within TCP."
+      ::= { tcpEStatsGroups 10 }
+
+    tcpEStatsStackOptionalGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsStackSoftErrors,
+              tcpEStatsStackSoftErrorReason,
+              tcpEStatsStackSlowStart, tcpEStatsStackCongAvoid,
+              tcpEStatsStackOtherReductions,
+              tcpEStatsStackCongOverCount,
+              tcpEStatsStackFastRetran,
+              tcpEStatsStackSubsequentTimeouts,
+              tcpEStatsStackCurTimeoutCount,
+              tcpEStatsStackAbruptTimeouts,
+              tcpEStatsStackSACKsRcvd,
+              tcpEStatsStackSACKBlocksRcvd,
+              tcpEStatsStackSendStall, tcpEStatsStackDSACKDups,
+              tcpEStatsStackMaxMSS, tcpEStatsStackMinMSS,
+              tcpEStatsStackSndInitial,
+              tcpEStatsStackRecInitial,
+              tcpEStatsStackCurRetxQueue,
+              tcpEStatsStackMaxRetxQueue,
+              tcpEStatsStackCurReasmQueue,
+              tcpEStatsStackMaxReasmQueue
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsConnState group includes objects that
+              provide additional information about the operation of
+              algorithms used within TCP."
+      ::= { tcpEStatsGroups 11 }
+
+    tcpEStatsAppGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsControlApp,
+              tcpEStatsAppSndUna, tcpEStatsAppSndNxt,
+              tcpEStatsAppSndMax, tcpEStatsAppThruOctetsAcked,
+              tcpEStatsAppRcvNxt,
+              tcpEStatsAppThruOctetsReceived
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsConnState group includes objects that
+              control the creation of the tcpEStatsAppTable,
+              and provide information about the operation of
+              algorithms used within TCP."
+      ::= { tcpEStatsGroups 12 }
+
+  tcpEStatsAppHCGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsAppHCThruOctetsAcked,
+              tcpEStatsAppHCThruOctetsReceived
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsStackHC group includes 64-bit
+              counters in the tcpEStatsStackTable."
+      ::= { tcpEStatsGroups 13 }
+
+    tcpEStatsAppOptionalGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsAppCurAppWQueue,
+              tcpEStatsAppMaxAppWQueue,
+              tcpEStatsAppCurAppRQueue,
+              tcpEStatsAppMaxAppRQueue
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsConnState group includes objects that
+              provide additional information about how applications
+              are interacting with each TCP connection."
+      ::= { tcpEStatsGroups 14 }
+
+    tcpEStatsTuneOptionalGroup  OBJECT-GROUP
+         OBJECTS {
+              tcpEStatsControlTune,
+              tcpEStatsTuneLimCwnd, tcpEStatsTuneLimSsthresh,
+              tcpEStatsTuneLimRwin, tcpEStatsTuneLimMSS
+
+         }
+         STATUS current
+         DESCRIPTION
+              "The tcpEStatsConnState group includes objects that
+              control the creation of the tcpEStatsConnectionTable,
+              which can be used to set tuning parameters
+              for each TCP connection."
+      ::= { tcpEStatsGroups 15 }
+
+    tcpEStatsNotificationsGroup      NOTIFICATION-GROUP
+         NOTIFICATIONS {
+                       tcpEStatsEstablishNotification,
+                       tcpEStatsCloseNotification
+         }
+         STATUS   current
+         DESCRIPTION
+             "Notifications sent by a TCP extended statistics agent."
+      ::= { tcpEStatsGroups 16 }
+
+    tcpEStatsNotificationsCtlGroup  OBJECT-GROUP
+         OBJECTS {
+                       tcpEStatsControlNotify
+         }
+         STATUS   current
+         DESCRIPTION
+             "The tcpEStatsNotificationsCtl group includes the
+              object that controls the creation of the events
+              in the tcpEStatsNotificationsGroup."
+      ::= { tcpEStatsGroups 17 }
+
+   END
diff --git a/snmp_builder/mibs/TCP-MIB.mib b/snmp_builder/mibs/TCP-MIB.mib
new file mode 100644
index 0000000..50e7f57
--- /dev/null
+++ b/snmp_builder/mibs/TCP-MIB.mib
@@ -0,0 +1,785 @@
+TCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32,
+    Gauge32, Counter32, Counter64, IpAddress, mib-2
+                                       FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
+    InetAddress, InetAddressType,
+    InetPortNumber                     FROM INET-ADDRESS-MIB;
+
+tcpMIB MODULE-IDENTITY
+    LAST-UPDATED "200502180000Z"  -- 18 February 2005
+    ORGANIZATION
+           "IETF IPv6 MIB Revision Team
+            http://www.ietf.org/html.charters/ipv6-charter.html"
+    CONTACT-INFO
+           "Rajiv Raghunarayan (editor)
+
+            Cisco Systems Inc.
+            170 West Tasman Drive
+            San Jose, CA 95134
+
+            Phone: +1 408 853 9612
+            Email: <raraghun@cisco.com>
+
+            Send comments to <ipv6@ietf.org>"
+    DESCRIPTION
+           "The MIB module for managing TCP implementations.
+
+            Copyright (C) The Internet Society (2005). This version
+            of this MIB module is a part of RFC 4022; see the RFC
+            itself for full legal notices."
+    REVISION      "200502180000Z"  -- 18 February 2005
+    DESCRIPTION
+           "IP version neutral revision, published as RFC 4022."
+    REVISION      "9411010000Z"
+    DESCRIPTION
+           "Initial SMIv2 version, published as RFC 2012."
+    REVISION      "9103310000Z"
+    DESCRIPTION
+           "The initial revision of this MIB module was part of
+            MIB-II."
+    ::= { mib-2 49 }
+
+-- the TCP base variables group
+
+tcp      OBJECT IDENTIFIER ::= { mib-2 6 }
+
+-- Scalars
+
+tcpRtoAlgorithm OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),    -- none of the following
+                    constant(2), -- a constant rto
+                    rsre(3),     -- MIL-STD-1778, Appendix B
+                    vanj(4),     -- Van Jacobson's algorithm
+                    rfc2988(5)   -- RFC 2988
+                }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The algorithm used to determine the timeout value used for
+            retransmitting unacknowledged octets."
+    ::= { tcp 1 }
+
+tcpRtoMin OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The minimum value permitted by a TCP implementation for
+            the retransmission timeout, measured in milliseconds.
+            More refined semantics for objects of this type depend
+            on the algorithm used to determine the retransmission
+            timeout; in particular, the IETF standard algorithm
+            rfc2988(5) provides a minimum value."
+    ::= { tcp 2 }
+
+tcpRtoMax OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The maximum value permitted by a TCP implementation for
+            the retransmission timeout, measured in milliseconds.
+            More refined semantics for objects of this type depend
+            on the algorithm used to determine the retransmission
+            timeout; in particular, the IETF standard algorithm
+            rfc2988(5) provides an upper bound (as part of an
+            adaptive backoff algorithm)."
+    ::= { tcp 3 }
+
+tcpMaxConn OBJECT-TYPE
+    SYNTAX     Integer32 (-1 | 0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The limit on the total number of TCP connections the entity
+            can support.  In entities where the maximum number of
+            connections is dynamic, this object should contain the
+            value -1."
+    ::= { tcp 4 }
+
+tcpActiveOpens OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of times that TCP connections have made a direct
+            transition to the SYN-SENT state from the CLOSED state.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 5 }
+
+tcpPassiveOpens OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of times TCP connections have made a direct
+            transition to the SYN-RCVD state from the LISTEN state.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 6 }
+
+tcpAttemptFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of times that TCP connections have made a direct
+            transition to the CLOSED state from either the SYN-SENT
+            state or the SYN-RCVD state, plus the number of times that
+            TCP connections have made a direct transition to the
+            LISTEN state from the SYN-RCVD state.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 7 }
+
+tcpEstabResets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of times that TCP connections have made a direct
+            transition to the CLOSED state from either the ESTABLISHED
+            state or the CLOSE-WAIT state.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 8 }
+
+tcpCurrEstab OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of TCP connections for which the current state
+            is either ESTABLISHED or CLOSE-WAIT."
+    ::= { tcp 9 }
+
+tcpInSegs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of segments received, including those
+            received in error.  This count includes segments received
+            on currently established connections.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 10 }
+
+tcpOutSegs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of segments sent, including those on
+            current connections but excluding those containing only
+            retransmitted octets.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 11 }
+
+tcpRetransSegs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of segments retransmitted; that is, the
+            number of TCP segments transmitted containing one or more
+            previously transmitted octets.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 12 }
+
+tcpInErrs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of segments received in error (e.g., bad
+            TCP checksums).
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 14 }
+
+tcpOutRsts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of TCP segments sent containing the RST flag.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 15 }
+
+-- { tcp 16 } was used to represent the ipv6TcpConnTable in RFC 2452,
+-- which has since been obsoleted.  It MUST not be used.
+
+tcpHCInSegs OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of segments received, including those
+            received in error.  This count includes segments received
+
+            on currently established connections.  This object is
+            the 64-bit equivalent of tcpInSegs.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 17 }
+
+tcpHCOutSegs OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of segments sent, including those on
+            current connections but excluding those containing only
+            retransmitted octets.  This object is the 64-bit
+            equivalent of tcpOutSegs.
+
+            Discontinuities in the value of this counter are
+            indicated via discontinuities in the value of sysUpTime."
+    ::= { tcp 18 }
+
+-- The TCP Connection table
+
+tcpConnectionTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TcpConnectionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A table containing information about existing TCP
+            connections.  Note that unlike earlier TCP MIBs, there
+            is a separate table for connections in the LISTEN state."
+    ::= { tcp 19 }
+
+tcpConnectionEntry OBJECT-TYPE
+    SYNTAX     TcpConnectionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A conceptual row of the tcpConnectionTable containing
+            information about a particular current TCP connection.
+            Each row of this table is transient in that it ceases to
+            exist when (or soon after) the connection makes the
+            transition to the CLOSED state."
+    INDEX   { tcpConnectionLocalAddressType,
+              tcpConnectionLocalAddress,
+              tcpConnectionLocalPort,
+              tcpConnectionRemAddressType,
+              tcpConnectionRemAddress,
+              tcpConnectionRemPort }
+    ::= { tcpConnectionTable 1 }
+
+TcpConnectionEntry ::= SEQUENCE {
+        tcpConnectionLocalAddressType   InetAddressType,
+        tcpConnectionLocalAddress       InetAddress,
+        tcpConnectionLocalPort          InetPortNumber,
+        tcpConnectionRemAddressType     InetAddressType,
+        tcpConnectionRemAddress         InetAddress,
+        tcpConnectionRemPort            InetPortNumber,
+        tcpConnectionState              INTEGER,
+        tcpConnectionProcess            Unsigned32
+    }
+
+tcpConnectionLocalAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of tcpConnectionLocalAddress."
+    ::= { tcpConnectionEntry 1 }
+
+tcpConnectionLocalAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local IP address for this TCP connection.  The type
+            of this address is determined by the value of
+            tcpConnectionLocalAddressType.
+
+            As this object is used in the index for the
+            tcpConnectionTable, implementors should be
+            careful not to create entries that would result in OIDs
+            with more than 128 subidentifiers; otherwise the information
+            cannot be accessed by using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { tcpConnectionEntry 2 }
+
+tcpConnectionLocalPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local port number for this TCP connection."
+    ::= { tcpConnectionEntry 3 }
+
+tcpConnectionRemAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of tcpConnectionRemAddress."
+    ::= { tcpConnectionEntry 4 }
+
+tcpConnectionRemAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The remote IP address for this TCP connection.  The type
+            of this address is determined by the value of
+            tcpConnectionRemAddressType.
+
+            As this object is used in the index for the
+            tcpConnectionTable, implementors should be
+            careful not to create entries that would result in OIDs
+            with more than 128 subidentifiers; otherwise the information
+            cannot be accessed by using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { tcpConnectionEntry 5 }
+
+tcpConnectionRemPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The remote port number for this TCP connection."
+    ::= { tcpConnectionEntry 6 }
+
+tcpConnectionState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    closed(1),
+                    listen(2),
+                    synSent(3),
+                    synReceived(4),
+                    established(5),
+                    finWait1(6),
+                    finWait2(7),
+                    closeWait(8),
+                    lastAck(9),
+                    closing(10),
+                    timeWait(11),
+                    deleteTCB(12)
+                }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The state of this TCP connection.
+
+            The value listen(2) is included only for parallelism to the
+            old tcpConnTable and should not be used.  A connection in
+            LISTEN state should be present in the tcpListenerTable.
+
+            The only value that may be set by a management station is
+            deleteTCB(12).  Accordingly, it is appropriate for an agent
+            to return a `badValue' response if a management station
+            attempts to set this object to any other value.
+
+            If a management station sets this object to the value
+            deleteTCB(12), then the TCB (as defined in [RFC793]) of
+            the corresponding connection on the managed node is
+            deleted, resulting in immediate termination of the
+            connection.
+
+            As an implementation-specific option, a RST segment may be
+            sent from the managed node to the other TCP endpoint (note,
+            however, that RST segments are not sent reliably)."
+    ::= { tcpConnectionEntry 7 }
+
+tcpConnectionProcess OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The system's process ID for the process associated with
+            this connection, or zero if there is no such process.  This
+            value is expected to be the same as HOST-RESOURCES-MIB::
+            hrSWRunIndex or SYSAPPL-MIB::sysApplElmtRunIndex for some
+            row in the appropriate tables."
+    ::= { tcpConnectionEntry 8 }
+
+-- The TCP Listener table
+
+tcpListenerTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TcpListenerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A table containing information about TCP listeners.  A
+            listening application can be represented in three
+            possible ways:
+
+            1. An application that is willing to accept both IPv4 and
+               IPv6 datagrams is represented by
+
+               a tcpListenerLocalAddressType of unknown (0) and
+               a tcpListenerLocalAddress of ''h (a zero-length
+               octet-string).
+
+            2. An application that is willing to accept only IPv4 or
+               IPv6 datagrams is represented by a
+               tcpListenerLocalAddressType of the appropriate address
+               type and a tcpListenerLocalAddress of '0.0.0.0' or '::'
+               respectively.
+
+            3. An application that is listening for data destined
+               only to a specific IP address, but from any remote
+               system, is represented by a tcpListenerLocalAddressType
+               of an appropriate address type, with
+               tcpListenerLocalAddress as the specific local address.
+
+            NOTE: The address type in this table represents the
+            address type used for the communication, irrespective
+            of the higher-layer abstraction.  For example, an
+            application using IPv6 'sockets' to communicate via
+            IPv4 between ::ffff:10.0.0.1 and ::ffff:10.0.0.2 would
+            use InetAddressType ipv4(1))."
+    ::= { tcp 20 }
+
+tcpListenerEntry OBJECT-TYPE
+    SYNTAX     TcpListenerEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A conceptual row of the tcpListenerTable containing
+            information about a particular TCP listener."
+    INDEX   { tcpListenerLocalAddressType,
+              tcpListenerLocalAddress,
+              tcpListenerLocalPort }
+    ::= { tcpListenerTable 1 }
+
+TcpListenerEntry ::= SEQUENCE {
+        tcpListenerLocalAddressType       InetAddressType,
+        tcpListenerLocalAddress           InetAddress,
+        tcpListenerLocalPort              InetPortNumber,
+        tcpListenerProcess                Unsigned32
+    }
+
+tcpListenerLocalAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of tcpListenerLocalAddress.  The value
+            should be unknown (0) if connection initiations to all
+            local IP addresses are accepted."
+    ::= { tcpListenerEntry 1 }
+
+tcpListenerLocalAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local IP address for this TCP connection.
+
+            The value of this object can be represented in three
+            possible ways, depending on the characteristics of the
+            listening application:
+
+            1. For an application willing to accept both IPv4 and
+               IPv6 datagrams, the value of this object must be
+               ''h (a zero-length octet-string), with the value
+               of the corresponding tcpListenerLocalAddressType
+               object being unknown (0).
+
+            2. For an application willing to accept only IPv4 or
+               IPv6 datagrams, the value of this object must be
+               '0.0.0.0' or '::' respectively, with
+               tcpListenerLocalAddressType representing the
+               appropriate address type.
+
+            3. For an application which is listening for data
+               destined only to a specific IP address, the value
+               of this object is the specific local address, with
+               tcpListenerLocalAddressType representing the
+               appropriate address type.
+
+            As this object is used in the index for the
+            tcpListenerTable, implementors should be
+            careful not to create entries that would result in OIDs
+            with more than 128 subidentifiers; otherwise the information
+            cannot be accessed, using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { tcpListenerEntry 2 }
+
+tcpListenerLocalPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local port number for this TCP connection."
+    ::= { tcpListenerEntry 3 }
+
+tcpListenerProcess OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The system's process ID for the process associated with
+            this listener, or zero if there is no such process.  This
+            value is expected to be the same as HOST-RESOURCES-MIB::
+            hrSWRunIndex or SYSAPPL-MIB::sysApplElmtRunIndex for some
+            row in the appropriate tables."
+    ::= { tcpListenerEntry 4 }
+
+-- The deprecated TCP Connection table
+
+tcpConnTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TcpConnEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "A table containing information about existing IPv4-specific
+            TCP connections or listeners.  This table has been
+            deprecated in favor of the version neutral
+            tcpConnectionTable."
+    ::= { tcp 13 }
+
+tcpConnEntry OBJECT-TYPE
+    SYNTAX     TcpConnEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "A conceptual row of the tcpConnTable containing information
+            about a particular current IPv4 TCP connection.  Each row
+            of this table is transient in that it ceases to exist when
+            (or soon after) the connection makes the transition to the
+            CLOSED state."
+    INDEX   { tcpConnLocalAddress,
+              tcpConnLocalPort,
+              tcpConnRemAddress,
+              tcpConnRemPort }
+    ::= { tcpConnTable 1 }
+
+TcpConnEntry ::= SEQUENCE {
+        tcpConnState         INTEGER,
+        tcpConnLocalAddress  IpAddress,
+        tcpConnLocalPort     Integer32,
+        tcpConnRemAddress    IpAddress,
+        tcpConnRemPort       Integer32
+
+    }
+
+tcpConnState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    closed(1),
+                    listen(2),
+                    synSent(3),
+                    synReceived(4),
+                    established(5),
+                    finWait1(6),
+                    finWait2(7),
+                    closeWait(8),
+                    lastAck(9),
+                    closing(10),
+                    timeWait(11),
+                    deleteTCB(12)
+                }
+    MAX-ACCESS read-write
+    STATUS     deprecated
+    DESCRIPTION
+           "The state of this TCP connection.
+
+            The only value that may be set by a management station is
+            deleteTCB(12).  Accordingly, it is appropriate for an agent
+            to return a `badValue' response if a management station
+            attempts to set this object to any other value.
+
+            If a management station sets this object to the value
+            deleteTCB(12), then the TCB (as defined in [RFC793]) of
+            the corresponding connection on the managed node is
+            deleted, resulting in immediate termination of the
+            connection.
+
+            As an implementation-specific option, a RST segment may be
+            sent from the managed node to the other TCP endpoint (note,
+            however, that RST segments are not sent reliably)."
+    ::= { tcpConnEntry 1 }
+
+tcpConnLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The local IP address for this TCP connection.  In the case
+            of a connection in the listen state willing to
+            accept connections for any IP interface associated with the
+            node, the value 0.0.0.0 is used."
+    ::= { tcpConnEntry 2 }
+
+tcpConnLocalPort OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The local port number for this TCP connection."
+    ::= { tcpConnEntry 3 }
+
+tcpConnRemAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The remote IP address for this TCP connection."
+    ::= { tcpConnEntry 4 }
+
+tcpConnRemPort OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The remote port number for this TCP connection."
+    ::= { tcpConnEntry 5 }
+
+-- conformance information
+
+tcpMIBConformance OBJECT IDENTIFIER ::= { tcpMIB 2 }
+
+tcpMIBCompliances OBJECT IDENTIFIER ::= { tcpMIBConformance 1 }
+tcpMIBGroups      OBJECT IDENTIFIER ::= { tcpMIBConformance 2 }
+
+-- compliance statements
+
+tcpMIBCompliance2 MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "The compliance statement for systems that implement TCP.
+
+            A number of INDEX objects cannot be
+            represented in the form of OBJECT clauses in SMIv2 but
+            have the following compliance requirements,
+            expressed in OBJECT clause form in this description
+            clause:
+
+            -- OBJECT      tcpConnectionLocalAddressType
+            -- SYNTAX      InetAddressType { ipv4(1), ipv6(2) }
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4
+
+            --     and IPv6 address types.
+            --
+            -- OBJECT      tcpConnectionRemAddressType
+            -- SYNTAX      InetAddressType { ipv4(1), ipv6(2) }
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4
+            --     and IPv6 address types.
+            --
+            -- OBJECT      tcpListenerLocalAddressType
+            -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+            --                               ipv6(2) }
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4
+            --     and IPv6 address types.  The type unknown also
+            --     needs to be supported to identify a special
+            --     case in the listener table: a listen using
+            --     both IPv4 and IPv6 addresses on the device.
+            --
+           "
+    MODULE  -- this module
+        MANDATORY-GROUPS { tcpBaseGroup, tcpConnectionGroup,
+                           tcpListenerGroup }
+        GROUP       tcpHCGroup
+        DESCRIPTION
+           "This group is mandatory for systems that are capable
+            of receiving or transmitting more than 1 million TCP
+            segments per second.  1 million segments per second will
+            cause a Counter32 to wrap in just over an hour."
+        OBJECT      tcpConnectionState
+        SYNTAX      INTEGER { closed(1), listen(2), synSent(3),
+                              synReceived(4), established(5),
+                              finWait1(6), finWait2(7), closeWait(8),
+                              lastAck(9), closing(10), timeWait(11) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+           "Write access is not required, nor is support for the value
+            deleteTCB (12)."
+    ::= { tcpMIBCompliances 2 }
+
+tcpMIBCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for IPv4-only systems that
+            implement TCP.  In order to be IP version independent, this
+            compliance statement is deprecated in favor of
+            tcpMIBCompliance2.  However, agents are still encouraged
+            to implement these objects in order to interoperate with
+            the deployed base of managers."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { tcpGroup }
+        OBJECT      tcpConnState
+        MIN-ACCESS  read-only
+        DESCRIPTION
+           "Write access is not required."
+    ::= { tcpMIBCompliances 1 }
+
+-- units of conformance
+
+tcpGroup OBJECT-GROUP
+    OBJECTS   { tcpRtoAlgorithm, tcpRtoMin, tcpRtoMax,
+                tcpMaxConn, tcpActiveOpens,
+                tcpPassiveOpens, tcpAttemptFails,
+                tcpEstabResets, tcpCurrEstab, tcpInSegs,
+                tcpOutSegs, tcpRetransSegs, tcpConnState,
+                tcpConnLocalAddress, tcpConnLocalPort,
+                tcpConnRemAddress, tcpConnRemPort,
+                tcpInErrs, tcpOutRsts }
+    STATUS     deprecated
+    DESCRIPTION
+           "The tcp group of objects providing for management of TCP
+            entities."
+    ::= { tcpMIBGroups 1 }
+
+tcpBaseGroup OBJECT-GROUP
+    OBJECTS   { tcpRtoAlgorithm, tcpRtoMin, tcpRtoMax,
+                tcpMaxConn, tcpActiveOpens,
+                tcpPassiveOpens, tcpAttemptFails,
+                tcpEstabResets, tcpCurrEstab, tcpInSegs,
+                tcpOutSegs, tcpRetransSegs,
+                tcpInErrs, tcpOutRsts }
+    STATUS     current
+    DESCRIPTION
+           "The group of counters common to TCP entities."
+    ::= { tcpMIBGroups 2 }
+
+tcpConnectionGroup OBJECT-GROUP
+    OBJECTS    { tcpConnectionState, tcpConnectionProcess }
+    STATUS     current
+    DESCRIPTION
+           "The group provides general information about TCP
+            connections."
+    ::= { tcpMIBGroups 3 }
+
+tcpListenerGroup OBJECT-GROUP
+    OBJECTS    { tcpListenerProcess }
+    STATUS     current
+    DESCRIPTION
+           "This group has objects providing general information about
+            TCP listeners."
+    ::= { tcpMIBGroups 4 }
+
+tcpHCGroup OBJECT-GROUP
+    OBJECTS    { tcpHCInSegs, tcpHCOutSegs }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for counters of high speed
+            TCP implementations."
+    ::= { tcpMIBGroups 5 }
+
+END
diff --git a/snmp_builder/mibs/TCPIPX-MIB.mib b/snmp_builder/mibs/TCPIPX-MIB.mib
new file mode 100644
index 0000000..1344ca9
--- /dev/null
+++ b/snmp_builder/mibs/TCPIPX-MIB.mib
@@ -0,0 +1,333 @@
+   TCPIPX-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+	   enterprises
+		   FROM RFC1155-SMI
+           OBJECT-TYPE
+                   FROM RFC-1212;
+
+-- IPX address type.
+-- First 4 octests are the network numbers and the last 6
+-- octests are the node numbers.  In ascii, it is represented
+
+-- as hex digits, as in:  nnnnnnnn:mmmmmmmmmmmm
+
+IpxAddress ::= OCTET STRING (SIZE (10))
+
+   -- TCP/IPX MIB object idenfifiers
+
+novell        OBJECT IDENTIFIER ::= { enterprises 23 }
+mibDoc        OBJECT IDENTIFIER ::= { novell 2 }
+tcpx          OBJECT IDENTIFIER ::= { mibDoc 29 }
+tcpxTcp       OBJECT IDENTIFIER ::= { tcpx 1 }
+tcpxUdp       OBJECT IDENTIFIER ::= { tcpx 2 }
+
+  -- the TCP/IPX Connection table
+
+   -- The TCP/IPX connection table contains information
+   -- about this entity's existing TCP connections over
+   -- IPX.
+
+   tcpIpxConnTable OBJECT-TYPE
+       SYNTAX  SEQUENCE OF TcpIpxConnEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "A table containing information specific on
+               TCP connection over IPX network layer."
+       ::= { tcpxTcp 1 }
+
+   tcpIpxConnEntry OBJECT-TYPE
+       SYNTAX  TcpIpxConnEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "Information about a particular current TCP
+               connection over IPX  An object of this type is
+               transient, in that it ceases to exist when (or
+               soon after) the connection makes the transition
+               to the CLOSED state."
+       INDEX   { tcpIpxConnLocalAddress,
+                 tcpIpxConnLocalPort,
+                 tcpIpxConnRemAddress,
+                 tcpIpxConnRemPort }
+      ::= { tcpIpxConnTable 1 }
+
+   TcpIpxConnEntry ::=
+       SEQUENCE {
+
+           tcpIpxConnState
+               INTEGER,
+           tcpIpxConnLocalAddress
+               IpxAddress
+           tcpIpxConnLocalPort
+               INTEGER (0..65535),
+           tcpIpxConnRemAddress
+               IpxAddress,
+           tcpIpxConnRemPort
+               INTEGER (0..65535)
+       }
+
+   tcpIpxConnState OBJECT-TYPE
+       SYNTAX  INTEGER {
+                   closed(1),
+                   listen(2),
+                   synSent(3),
+                   synReceived(4),
+                   established(5),
+                   finWait1(6),
+                   finWait2(7),
+                   closeWait(8),
+                   lastAck(9),
+                   closing(10),
+                   timeWait(11),
+                   deleteTCB(12)
+               }
+       ACCESS  read-write
+       STATUS  mandatory
+       DESCRIPTION
+               "The state of this TCP connection.
+
+               The only value which may be set by a management
+               station is deleteTCB(12).  Accordingly, it is
+               appropriate for an agent to return a `badValue'
+               response if a management station attempts to set
+               this object to any other value.
+
+               If a management station sets this object to the
+               value deleteTCB(12), then this has the effect of
+               deleting the TCB (as defined in RFC 793) of the
+               corresponding connection on the managed node,
+               resulting in immediate termination of the
+               connection.
+
+               As an implementation-specific option, a RST
+               segment may be sent from the managed node to the
+               other TCP endpoint (note however that RST
+
+               segments are not sent reliably)."
+       ::= { tcpIpxConnEntry 1 }
+
+   tcpIpxConnLocalAddress OBJECT-TYPE
+       SYNTAX  IpxAddress
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The local IPX address for this TCP connection.
+               In the case of a connection in the listen state
+               which is willing to accept connections for any
+               interface, the value 00000000:000000000000 is
+               used.  See tcpUnspecConnTable for connections in
+               the listen  state which is willing to accept
+               connects for any IP interface associated with
+               the node."
+       ::= { tcpIpxConnEntry 2 }
+
+   -- NetworkAddress defined in SMI only include IP currently,
+   -- so we can't use it to represent both IP and IPX address.
+
+   tcpIpxConnLocalPort OBJECT-TYPE
+       SYNTAX  INTEGER (0..65535)
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The local port number for this TCP connection."
+       ::= { tcpIpxConnEntry 3 }
+
+   tcpIpxConnRemAddress OBJECT-TYPE
+       SYNTAX  IpxAddress
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The remote IPX address for this TCP connection."
+       ::= { tcpIpxConnEntry 4 }
+
+   tcpIpxConnRemPort OBJECT-TYPE
+       SYNTAX  INTEGER (0..65535)
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The remote port number for this TCP connection."
+       ::= { tcpIpxConnEntry 5 }
+
+   -- the UDP Listener table
+
+   -- The UDP listener table contains information about this
+   -- entity's UDP end-points on which a local application is
+   -- currently accepting datagrams.
+
+   udpIpxTable OBJECT-TYPE
+       SYNTAX  SEQUENCE OF UdpIpxEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "A table containing UDP listener information."
+       ::= { tcpxUdp 1 }
+
+   udpIpxEntry OBJECT-TYPE
+       SYNTAX  UdpIpxEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "Information about a particular current UDP
+               listener."
+       INDEX   { udpIpxLocalAddress, udpIpxLocalPort }
+       ::= { udpIpxTable 1 }
+
+   UdpIpxEntry ::=
+       SEQUENCE {
+           udpIpxLocalAddress
+    IpxAddress
+           udpIpxLocalPort
+               INTEGER (0..65535)
+       }
+
+   udpIpxLocalAddress OBJECT-TYPE
+       SYNTAX  IpxAddress
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The local IPX address for this UDP listener.  In
+               the case of a UDP listener which is willing to
+               accept datagrams for any interface, the value
+               00000000:000000000000 is used.  See
+               udpUnspecTable for UDP listener which is
+               willing to accept datagrams from any network
+               layer."
+       ::= { udpIpxEntry 1 }
+
+   udpIpxLocalPort OBJECT-TYPE
+       SYNTAX  INTEGER (0..65535)
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The local port number for this UDP listener."
+       ::= { udpIpxEntry 2 }
+
+   -- the TCP/UNSPEC Connection table
+
+   -- The TCP/UPSPEC connection table contains information
+   -- about this entity's existing TCP connections over
+   -- unspecified network.
+   -- Since the network is unspecified, the network
+   -- address is also unspecified.  Hence, this
+   -- connection table does not include any network
+   -- address.
+
+   tcpUnspecConnTable OBJECT-TYPE
+       SYNTAX  SEQUENCE OF TcpIpxConnEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "A table containing information specific on
+               TCP connection over unspecified network layer."
+       ::= { tcpxTcp 2 }
+
+   tcpUnspecConnEntry OBJECT-TYPE
+       SYNTAX  TcpUnspecConnEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "Information about a particular current TCP
+               connection over unspecified network layer.  An
+               object of this type is transient, in that it
+               ceases to exist when the connection makes
+               transition beyond LISTEN state, or when (or
+               soon after) the connection makes transition
+               to the CLOSED state,"
+       INDEX   { tcpUnspecConnLocalPort }
+       ::= { tcpUnspecConnTable 1 }
+
+   TcpUnspecConnEntry ::=
+       SEQUENCE {
+           tcpUnspecConnState
+               INTEGER,
+           tcpUnspecConnLocalPort
+
+               INTEGER (0..65535),
+       }
+
+   tcpUnspecConnState OBJECT-TYPE
+       SYNTAX  INTEGER {
+                   closed(1),
+                   listen(2),
+                   deleteTCB(12)
+               }
+       ACCESS  read-write
+       STATUS  mandatory
+       DESCRIPTION
+               "The state of this TCP connection.
+
+               Since the TCP connection can belong to this table
+               only when its state is less than SYN_SENT, only
+               closed and listen state apply.
+
+               The only value which may be set by a management
+               station is deleteTCB(12).  Accordingly, it is
+               appropriate for an agent to return a `badValue'
+               response if a management station attempts to set
+               this object to any other value.
+
+               If a management station sets this object to the
+               value deleteTCB(12), then this has the effect of
+               deleting the TCB (as defined in RFC 793) of the
+               corresponding connection on the managed node,
+               resulting in immediate termination of the
+               connection.
+
+               As an implementation-specific option, a RST
+               segment may be sent from the managed node to the
+               other TCP endpoint (note however that RST
+               segments are not sent reliably)."
+       ::= { tcpUnspecConnEntry 1 }
+
+   tcpUnspecConnLocalPort OBJECT-TYPE
+       SYNTAX  INTEGER (0..65535)
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The local port number for this TCP connection."
+       ::= { tcpUnspecConnEntry 2 }
+
+   -- the UDP Listener table
+
+   -- The UDP listener table contains information about this
+   -- entity's UDP end-points over unspecified network layer,
+   -- on which a local application is currently accepting
+   -- datagrams.  If network layer is unspecified, the network
+   -- address is also unspecified.  Hence, this table does not
+   -- include any network address.
+
+   udpUnspecTable OBJECT-TYPE
+       SYNTAX  SEQUENCE OF UdpUnspecEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+                "A table containing UDP listener information."
+       ::= { tcpxUdp 2 }
+
+   udpUnspecEntry OBJECT-TYPE
+       SYNTAX  UdpUnspecEntry
+       ACCESS  not-accessible
+       STATUS  mandatory
+       DESCRIPTION
+               "Information about a particular current UDP
+               listener."
+       INDEX   { udpUnspecLocalPort }
+       ::= { udpUnspecTable 1 }
+
+   UdpUnspecEntry ::=
+       SEQUENCE {
+           udpUnspecLocalPort
+               INTEGER (0..65535)
+       }
+
+   udpUnspecLocalPort OBJECT-TYPE
+       SYNTAX  INTEGER (0..65535)
+       ACCESS  read-only
+       STATUS  mandatory
+       DESCRIPTION
+               "The local port number for this UDP listener."
+       ::= { udpUnspecEntry 1 }
+
+    END
diff --git a/snmp_builder/mibs/TE-LINK-STD-MIB.mib b/snmp_builder/mibs/TE-LINK-STD-MIB.mib
new file mode 100644
index 0000000..c635265
--- /dev/null
+++ b/snmp_builder/mibs/TE-LINK-STD-MIB.mib
@@ -0,0 +1,1745 @@
+TE-LINK-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, transmission, Integer32, Unsigned32
+      FROM SNMPv2-SMI
+
+   MODULE-COMPLIANCE, OBJECT-GROUP
+      FROM SNMPv2-CONF
+
+   TEXTUAL-CONVENTION, RowStatus, StorageType
+      FROM SNMPv2-TC
+
+   InterfaceIndexOrZero, ifIndex
+      FROM IF-MIB
+
+   InetAddressType, InetAddress
+      FROM INET-ADDRESS-MIB;
+
+teLinkStdMIB MODULE-IDENTITY
+   LAST-UPDATED "200510110000Z"  -- 11 October 2005
+   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
+   CONTACT-INFO
+       "        Martin Dubuc
+        Email:  mdubuc@ncf.ca
+
+                Thomas D. Nadeau
+        Email:  tnadeau@cisco.com
+
+                Jonathan P. Lang
+        Email:  jplang@ieee.org
+
+        Comments about this document should be emailed directly to
+        the MPLS working group mailing list at mpls@uu.net."
+   DESCRIPTION
+       "Copyright (C) 2005 The Internet Society.  This version of
+        this MIB module is part of RFC 4220; see the RFC
+        itself for full legal notices.
+
+        This MIB module contains managed object definitions for
+        MPLS traffic engineering links as defined in
+        'Link Bundling in MPLS Traffic Engineering (TE)'."
+
+   -- Revision history.
+   REVISION
+       "200510110000Z"  -- 11 October 2005
+   DESCRIPTION
+       "Initial version published as RFC 4220."
+   ::= { transmission 200 }
+
+-- Textual Conventions
+
+TeLinkBandwidth ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+       "This type is used to represent link bandwidth in bps.  This
+        value is represented using a 4 octet IEEE floating point
+        format [IEEE].  The floating point representation is not
+        used to represent fractional value but rather to allow
+        specification of large numbers that cannot be expressed
+        with 32-bit integers."
+   REFERENCE
+       "IEEE Standard for Binary Floating-Point Arithmetic,
+        Standard 754-1985"
+   SYNTAX       OCTET STRING (SIZE(4))
+
+TeLinkPriority ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "d"
+   STATUS       current
+   DESCRIPTION
+       "This type is used to represent a priority.  Each connection
+        is assigned a priority.  This priority is used when
+        accounting for bandwidth on TE links or component
+        links, for resource allocation and for rerouting purposes.
+        Value 0 is the highest priority.  Value 7 is the lowest
+        priority."
+   SYNTAX       Unsigned32 (0..7)
+
+TeLinkProtection ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+       "Link protection."
+   SYNTAX       INTEGER {
+                    primary(1),
+                    secondary(2)
+                }
+
+TeLinkSwitchingCapability ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+       "Switching capability as specified in the 'OSPF Extensions in
+        Support of Generalized Multi-Protocol Label Switching
+        (GMPLS)' document.  The values specified in this document
+        are not contiguous."
+   SYNTAX       INTEGER {
+                    packetSwitch1(1),
+                    packetSwitch2(2),
+                    packetSwitch3(3),
+                    packetSwitch4(4),
+                    layer2Switch(51),
+                    tdm(100),
+                    lambdaSwitch(150),
+                    fiberSwitch(200)
+                }
+
+TeLinkEncodingType ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+       "Link encoding type as specified in 'Generalized
+        Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description' document.  The values
+        specified in this document are not contiguous."
+   SYNTAX       INTEGER {
+                    packet(1),
+                    ethernet(2),
+                    ansiEtsiPdh(3),
+                    sdhItuSonetAnsi(5),
+                    digitalWrapper(7),
+                    lambda(8),
+                    fiber(9),
+                    fiberChannel(11)
+                }
+
+TeLinkSonetSdhIndication ::= TEXTUAL-CONVENTION
+   STATUS       current
+   DESCRIPTION
+       "This convention is used to indicate whether the interface
+        supports Standard or Arbitrary SONET/SDH.  To simplify the
+        mapping process, the values used in this textual convention
+        match the values specified in the interface switching
+        capability specific information field, i.e., 0 for Standard
+        SONET/SDH and 1 for Arbitrary SONET/SDH."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   SYNTAX       INTEGER {
+                    standard(0),
+                    arbitrary(1)
+                }
+
+-- Top level components of this MIB module
+
+-- Notifications
+teLinkNotifications OBJECT IDENTIFIER ::= { teLinkStdMIB 0 }
+-- Tables, Scalars
+teLinkObjects       OBJECT IDENTIFIER ::= { teLinkStdMIB 1 }
+-- Conformance
+teLinkConformance   OBJECT IDENTIFIER ::= { teLinkStdMIB 2 }
+
+-- TE Link Table
+
+teLinkTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF TeLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the grouping of component links into
+        TE links and the grouping of TE links into bundled links."
+   ::= { teLinkObjects 1 }
+
+teLinkEntry OBJECT-TYPE
+   SYNTAX        TeLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table exists for each ifEntry with an
+        ifType of teLink(200), i.e., for every TE link.  An ifEntry
+        in the ifTable must exist before a teLinkEntry is created
+        with the corresponding ifIndex.  If a TE link entry in the
+        ifTable is destroyed, then so is the corresponding entry
+        in the teLinkTable.  The administrative and operational
+        status values are controlled from the ifEntry."
+   INDEX         { ifIndex }
+   ::= { teLinkTable 1 }
+
+TeLinkEntry ::= SEQUENCE {
+  teLinkAddressType                 InetAddressType,
+  teLinkLocalIpAddr                 InetAddress,
+  teLinkRemoteIpAddr                InetAddress,
+  teLinkMetric                      Unsigned32,
+  teLinkMaximumReservableBandwidth  TeLinkBandwidth,
+  teLinkProtectionType              INTEGER,
+  teLinkWorkingPriority             TeLinkPriority,
+  teLinkResourceClass               Unsigned32,
+  teLinkIncomingIfId                Integer32,
+  teLinkOutgoingIfId                InterfaceIndexOrZero,
+  teLinkRowStatus                   RowStatus,
+  teLinkStorageType                 StorageType
+}
+
+teLinkAddressType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The type of Internet address for the TE link."
+   ::= { teLinkEntry 1 }
+
+teLinkLocalIpAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The local Internet address for numbered links.  The type of
+        this address is determined by the value of the
+        teLinkAddressType object.
+
+        For IPv4 and IPv6 numbered links, this object represents the
+        local IP address associated with the TE link.  For an
+        unnumbered link, the local address is of type unknown, this
+        object is set to the zero length string, and the
+        teLinkOutgoingIfId object then identifies the unnumbered
+        address.
+
+        If the TE link is a Forwarding Adjacency (FA), the local
+        IP address is set to the head-end address of the FA-LSP.
+
+        If ipAddrTable is implemented, this object must have the
+        same value as the ipAdEntAddr object that belongs to the
+        row in ipAddrTable where ipAdEntIfIndex is equal to
+
+        ifIndex."
+   ::= { teLinkEntry 2 }
+
+teLinkRemoteIpAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The remote Internet address for numbered links.  The type of
+        this address is determined by the value of the
+        teLinkAddressType object.
+
+        The remote IP address associated with the TE link (IPv4 and
+        IPv6 numbered links).  For an unnumbered link, the remote
+        address is of type unknown, this object is set to the
+        zero length string, and the teLinkIncomingIfId object then
+        identifies the unnumbered address.
+
+        If the TE link is a Forwarding Adjacency, the remote IP
+        address is set to the tail-end address of the FA-LSP."
+   ::= { teLinkEntry 3 }
+
+teLinkMetric OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The traffic engineering metric for the TE link is
+        derived from its component links.  All component links
+        within the TE link must have the same traffic
+        engineering metric."
+   REFERENCE
+       "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
+   ::= { teLinkEntry 4 }
+
+teLinkMaximumReservableBandwidth OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum reservable bandwidth on
+        the TE link.  This is the union of the maximum reservable
+        bandwidth of all the component links within the
+        TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkEntry 5 }
+
+teLinkProtectionType OBJECT-TYPE
+   SYNTAX        INTEGER {
+                     extraTraffic(1),
+                     unprotected(2),
+                     shared(3),
+                     dedicated1For1(4),
+                     dedicated1Plus1(5),
+                     enhanced(6)
+                 }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the link protection type of the
+        TE link.  Descriptions of the different protection types can
+        be found in the 'Routing Extensions in Support of
+        Generalized Multi-Protocol Label Switching (GMPLS)'
+        document."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203 and
+        Routing Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4202"
+   ::= { teLinkEntry 6 }
+
+teLinkWorkingPriority OBJECT-TYPE
+   SYNTAX        TeLinkPriority
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object represents a priority value such that a new
+        connection with a higher priority, i.e., numerically lower
+        than this value, is guaranteed to be setup on a primary
+        link and not on a secondary link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkEntry 7 }
+
+teLinkResourceClass OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the TE link resource class.
+        The resource class is a 32 bit bitfield.  The resource class
+        for a link bundle is derived from the resource class of its
+
+        TE links.  All TE links within a link bundle must have the
+        same resource class.  Encoding of the resource class is
+        described in the 'Traffic Engineering (TE) Extensions to
+        OSPF Version 2' document."
+   REFERENCE
+       "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201
+        and Traffic Engineering (TE) Extensions to OSPF Version 2,
+        RFC 3630"
+   ::= { teLinkEntry 8 }
+
+teLinkIncomingIfId OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For unnumbered links, the incoming interface is set to the
+        outgoing interface identifier chosen by the neighboring LSR
+        for the reverse link corresponding to this TE link.  If the
+        link is numbered, the value of this object is 0 and the
+        address is stored in the teLinkRemoteIpAddr instead."
+   REFERENCE
+       "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
+   ::= { teLinkEntry 9 }
+
+teLinkOutgoingIfId OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If the link is unnumbered, the outgoing interface identifier
+        is set to the outgoing interface identifier chosen for the
+        TE link by the advertising LSR.  If the link is numbered, the
+        value of this object is 0 and the address is stored in the
+        teLinkLocalIpAddr instead."
+   REFERENCE
+       "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
+   ::= { teLinkEntry 10 }
+
+teLinkRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  None of the writable objects in
+        a row can be changed if status is active(1)."
+   ::= { teLinkEntry 11 }
+
+teLinkStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        teLinkTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   ::= { teLinkEntry 12 }
+
+-- End of teLinkTable
+
+-- TE Link Descriptor Table
+
+teLinkDescriptorTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF TeLinkDescriptorEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the interface switching capability
+        descriptors associated with the TE links."
+   ::= { teLinkObjects 2 }
+
+teLinkDescriptorEntry OBJECT-TYPE
+   SYNTAX        TeLinkDescriptorEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created for every TE link interface
+        switching capability descriptor.  An ifEntry in the ifTable
+        must exist before a teLinkDescriptorEntry using the same
+        ifIndex is created.  ifType of ifEntry must be teLink(200).
+        If a TE link entry in the ifTable is destroyed, then so are
+        all of the entries in the teLinkDescriptorTable that use the
+        ifIndex of this TE link."
+   INDEX         { ifIndex, teLinkDescriptorId }
+   ::= { teLinkDescriptorTable 1 }
+
+TeLinkDescriptorEntry ::= SEQUENCE {
+  teLinkDescriptorId               Unsigned32,
+  teLinkDescrSwitchingCapability   TeLinkSwitchingCapability,
+  teLinkDescrEncodingType          TeLinkEncodingType,
+  teLinkDescrMinLspBandwidth       TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio0  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio1  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio2  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio3  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio4  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio5  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio6  TeLinkBandwidth,
+  teLinkDescrMaxLspBandwidthPrio7  TeLinkBandwidth,
+  teLinkDescrInterfaceMtu          Unsigned32,
+  teLinkDescrIndication            TeLinkSonetSdhIndication,
+  teLinkDescrRowStatus             RowStatus,
+  teLinkDescrStorageType           StorageType
+}
+
+teLinkDescriptorId OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..4294967295)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the link descriptor identifier."
+   ::= { teLinkDescriptorEntry 1 }
+
+teLinkDescrSwitchingCapability OBJECT-TYPE
+   SYNTAX        TeLinkSwitchingCapability
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies interface switching capability of
+        the TE link, which is derived from its component links."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 2 }
+
+teLinkDescrEncodingType OBJECT-TYPE
+   SYNTAX        TeLinkEncodingType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the TE link encoding type."
+   REFERENCE
+       "Generalized Multi-Protocol Label Switching (GMPLS)
+        Signaling Functional Description, RFC 3471"
+   ::= { teLinkDescriptorEntry 3 }
+
+teLinkDescrMinLspBandwidth OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the minimum LSP bandwidth on
+        the TE link.  This is derived from the union of the
+        minimum LSP bandwidth of all the component links
+        associated with the TE link that can be used to carry
+        live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 4 }
+
+teLinkDescrMaxLspBandwidthPrio0 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 0 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 0 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 5 }
+
+teLinkDescrMaxLspBandwidthPrio1 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 1 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 1 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 6 }
+
+teLinkDescrMaxLspBandwidthPrio2 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 2 on the TE link.  This is the union of the maximum
+
+        LSP bandwidth at priority 2 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 7 }
+
+teLinkDescrMaxLspBandwidthPrio3 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 3 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 3 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 8 }
+
+teLinkDescrMaxLspBandwidthPrio4 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 4 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 4 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 9 }
+
+teLinkDescrMaxLspBandwidthPrio5 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 5 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 5 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 10 }
+
+teLinkDescrMaxLspBandwidthPrio6 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 6 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 6 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 11 }
+
+teLinkDescrMaxLspBandwidthPrio7 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 7 on the TE link.  This is the union of the maximum
+        LSP bandwidth at priority 7 of all the component links within
+        the TE link that can be used to carry live traffic."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 12 }
+
+teLinkDescrInterfaceMtu OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..65535)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the interface MTU for the TE
+        link descriptor."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 13 }
+
+teLinkDescrIndication OBJECT-TYPE
+   SYNTAX        TeLinkSonetSdhIndication
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies whether this interface supports
+        Standard or Arbitrary SONET/SDH."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkDescriptorEntry 14 }
+
+teLinkDescrRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  No read-create object
+        can be changed if teLinkDescrRowStatus is in the active(1)
+        state."
+   ::= { teLinkDescriptorEntry 15 }
+
+teLinkDescrStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        teLinkDescriptorTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   ::= { teLinkDescriptorEntry 16 }
+
+-- End of teLinkDescriptorTable
+
+-- TE Link Shared Risk Link Group Table
+
+teLinkSrlgTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF TeLinkSrlgEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the SRLGs associated with TE links."
+   ::= { teLinkObjects 3 }
+
+teLinkSrlgEntry OBJECT-TYPE
+   SYNTAX        TeLinkSrlgEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table contains information about an
+        SRLG associated with a TE link.
+        An ifEntry in the ifTable must exist before a
+        teLinkSrlgEntry using the same ifIndex is created.
+        The ifType of ifEntry must be teLink(200).
+        If a TE link entry in the ifTable is destroyed, then so
+        are all of the entries in the teLinkSrlgTable that use the
+        ifIndex of this TE link."
+   INDEX         { ifIndex, teLinkSrlg }
+   ::= { teLinkSrlgTable 1 }
+
+TeLinkSrlgEntry ::= SEQUENCE {
+  teLinkSrlg            Unsigned32,
+  teLinkSrlgRowStatus   RowStatus,
+  teLinkSrlgStorageType StorageType
+}
+
+teLinkSrlg OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..4294967295)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This identifies an SRLG supported by the TE link.  An SRLG is
+        identified with a 32-bit number that is unique within an IGP
+        domain.  Zero is a valid SRLG number."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { teLinkSrlgEntry 1 }
+
+teLinkSrlgRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  No read-create object can
+        be modified if teLinkSrlgRowStatus is active(1)."
+   ::= { teLinkSrlgEntry 2 }
+
+teLinkSrlgStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+
+        teLinkSrlgTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   ::= { teLinkSrlgEntry 3 }
+
+-- End of teLinkSrlgTable
+
+-- TE Link Bandwidth Table
+
+teLinkBandwidthTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF TeLinkBandwidthEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the priority-based bandwidth table
+        for TE links."
+   ::= { teLinkObjects 4 }
+
+teLinkBandwidthEntry OBJECT-TYPE
+   SYNTAX        TeLinkBandwidthEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table contains information about
+        the priority-based bandwidth of TE links.  An ifEntry in the
+        ifTable must exist before a teLinkBandwidthEntry using the
+        same ifIndex is created.  The ifType of ifEntry must be
+        teLink(200).  If a TE link entry in the ifTable is destroyed,
+        then so are all of the entries in the teLinkBandwidthTable
+        that use the ifIndex of this TE link."
+   INDEX         { ifIndex, teLinkBandwidthPriority }
+   ::= { teLinkBandwidthTable 1 }
+
+TeLinkBandwidthEntry ::= SEQUENCE {
+  teLinkBandwidthPriority    TeLinkPriority,
+  teLinkBandwidthUnreserved  TeLinkBandwidth,
+  teLinkBandwidthRowStatus   RowStatus,
+  teLinkBandwidthStorageType StorageType
+}
+
+teLinkBandwidthPriority OBJECT-TYPE
+   SYNTAX        TeLinkPriority
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the priority.  A value of 0 is valid
+        as specified in the 'Traffic Engineering (TE) Extensions to
+
+        OSPF Version 2' document."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203 and
+        Traffic Engineering (TE) Extensions to OSPF Version 2,
+        RFC 3630"
+   ::= { teLinkBandwidthEntry 1 }
+
+teLinkBandwidthUnreserved OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the TE link unreserved
+        bandwidth at priority p.  It is the sum of the unreserved
+        bandwidths at priority p of all component links associated
+        with the TE link (excluding all links that are strictly
+        used as protecting links)."
+   REFERENCE
+       "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
+   ::= { teLinkBandwidthEntry 2 }
+
+teLinkBandwidthRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  No read-create object
+        can be modified when teLinkBandwidthRowStatus is active(1)."
+   ::= { teLinkBandwidthEntry 3 }
+
+teLinkBandwidthStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        teLinkBandwidthTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   ::= { teLinkBandwidthEntry 4 }
+
+-- End of teLinkBandwidthTable
+
+-- Component Link Table
+
+componentLinkTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF ComponentLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the component link parameters."
+   ::= { teLinkObjects 5 }
+
+componentLinkEntry  OBJECT-TYPE
+   SYNTAX        ComponentLinkEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table exists for each ifEntry that
+        represents a component link.  An ifEntry must exist in
+        the ifTable before a componentLinkEntry is created with
+        the corresponding ifIndex.  ifEntry's ifType can be
+        of any interface type that has been defined for TE Link
+        interworking.  Examples include ATM, Frame Relay, Ethernet,
+        etc.  If an entry representing a component link is destroyed
+        in the ifTable, then so is the corresponding entry in the
+        componentLinkTable.  The administrative and operational
+        status values are controlled from the ifEntry."
+   INDEX         { ifIndex }
+   ::= { componentLinkTable 1 }
+
+ComponentLinkEntry ::= SEQUENCE {
+  componentLinkMaxResBandwidth     TeLinkBandwidth,
+  componentLinkPreferredProtection TeLinkProtection,
+  componentLinkCurrentProtection   TeLinkProtection,
+  componentLinkRowStatus           RowStatus,
+  componentLinkStorageType         StorageType
+}
+
+componentLinkMaxResBandwidth OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum reservable bandwidth on
+        the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkEntry 1 }
+
+componentLinkPreferredProtection OBJECT-TYPE
+   SYNTAX        TeLinkProtection
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies whether this component link is
+        a primary or secondary entity."
+   ::= { componentLinkEntry 2 }
+
+componentLinkCurrentProtection OBJECT-TYPE
+   SYNTAX        TeLinkProtection
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies whether this component link is
+        currently used as primary or secondary link."
+   ::= { componentLinkEntry 3 }
+
+componentLinkRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  No read-create object
+        can be modified when componentLinkRowStatus is active(1)."
+   ::= { componentLinkEntry 4 }
+
+componentLinkStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        componentLinkTable.  Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar object in the row."
+   ::= { componentLinkEntry 5 }
+
+-- End of componentLinkTable
+
+-- Component Link Descriptor Table
+
+componentLinkDescriptorTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF ComponentLinkDescriptorEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the interface switching capability
+        descriptors associated with the component links."
+   ::= { teLinkObjects 6 }
+
+componentLinkDescriptorEntry OBJECT-TYPE
+   SYNTAX        ComponentLinkDescriptorEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created for every component link
+        descriptor.  An ifEntry in the ifTable must exist before a
+        componentLinkDescriptorEntry using the same ifIndex is
+        created.  ifEntry's ifType can be of any interface type that
+        has been defined for TE Link interworking.  Examples include
+        ATM, Frame Relay, Ethernet, etc.  If a component link entry
+        in the ifTable is destroyed, then so are all entries in the
+        componentLinkDescriptorTable that use the ifIndex of this
+        component link."
+   INDEX         { ifIndex, componentLinkDescrId }
+   ::= { componentLinkDescriptorTable 1 }
+
+ComponentLinkDescriptorEntry ::= SEQUENCE {
+  componentLinkDescrId                    Unsigned32,
+  componentLinkDescrSwitchingCapability   TeLinkSwitchingCapability,
+  componentLinkDescrEncodingType          TeLinkEncodingType,
+  componentLinkDescrMinLspBandwidth       TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio0  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio1  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio2  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio3  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio4  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio5  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio6  TeLinkBandwidth,
+  componentLinkDescrMaxLspBandwidthPrio7  TeLinkBandwidth,
+  componentLinkDescrInterfaceMtu          Unsigned32,
+  componentLinkDescrIndication            TeLinkSonetSdhIndication,
+  componentLinkDescrRowStatus             RowStatus,
+  componentLinkDescrStorageType           StorageType
+}
+
+componentLinkDescrId OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..4294967295)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This object specifies the link descriptor identifier."
+   ::= { componentLinkDescriptorEntry 1 }
+
+componentLinkDescrSwitchingCapability OBJECT-TYPE
+   SYNTAX        TeLinkSwitchingCapability
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies link multiplexing capabilities of
+        the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 2 }
+
+componentLinkDescrEncodingType OBJECT-TYPE
+   SYNTAX        TeLinkEncodingType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the component link encoding type."
+   REFERENCE
+       "Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+        Functional Description, RFC 3471"
+   ::= { componentLinkDescriptorEntry 3 }
+
+componentLinkDescrMinLspBandwidth OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the minimum LSP bandwidth on
+        the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 4 }
+
+componentLinkDescrMaxLspBandwidthPrio0 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 0 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 5 }
+
+componentLinkDescrMaxLspBandwidthPrio1 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 1 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 6 }
+
+componentLinkDescrMaxLspBandwidthPrio2 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 2 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 7 }
+
+componentLinkDescrMaxLspBandwidthPrio3 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 3 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 8 }
+
+componentLinkDescrMaxLspBandwidthPrio4 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 4 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 9 }
+
+componentLinkDescrMaxLspBandwidthPrio5 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "thousand bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 5 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 10 }
+
+componentLinkDescrMaxLspBandwidthPrio6 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 6 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 11 }
+
+componentLinkDescrMaxLspBandwidthPrio7 OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the maximum LSP bandwidth at
+        priority 7 on the component link."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 12 }
+
+componentLinkDescrInterfaceMtu OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..65535)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the interface MTU for the component
+        link descriptor."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 13 }
+
+componentLinkDescrIndication OBJECT-TYPE
+   SYNTAX        TeLinkSonetSdhIndication
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies whether this interface supports
+        Standard or Arbitrary SONET/SDH."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkDescriptorEntry 14 }
+
+componentLinkDescrRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  No read-create object
+        can be modified when componentLinkDescrRowStatus
+        is active(1)."
+   ::= { componentLinkDescriptorEntry 15 }
+
+componentLinkDescrStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        componentLinkDescriptorTable.  Conceptual rows
+        having the value 'permanent' need not allow write-access
+        to any columnar object in the row."
+   ::= { componentLinkDescriptorEntry 16 }
+
+-- End of componentLinkDescriptorTable
+
+-- Component Link Bandwidth Table
+
+componentLinkBandwidthTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF ComponentLinkBandwidthEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the priority-based bandwidth
+        for component links."
+   ::= { teLinkObjects 7 }
+
+componentLinkBandwidthEntry OBJECT-TYPE
+   SYNTAX        ComponentLinkBandwidthEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table contains information about
+        the priority-based bandwidth on component links.
+        An ifEntry in the ifTable must exist before a
+        componentLinkBandwidthEntry using the same ifIndex is
+        created.  ifEntry's ifType can be of any interface type that
+        has been defined for TE Link interworking.  Examples
+        include ATM, Frame Relay, Ethernet, etc.  If a component link
+        entry in the ifTable is destroyed, then so are all entries
+        in the componentLinkBandwidthTable that use the ifIndex of
+        this component link."
+   INDEX         { ifIndex, componentLinkBandwidthPriority }
+   ::= { componentLinkBandwidthTable 1 }
+
+ComponentLinkBandwidthEntry ::= SEQUENCE {
+  componentLinkBandwidthPriority    TeLinkPriority,
+  componentLinkBandwidthUnreserved  TeLinkBandwidth,
+  componentLinkBandwidthRowStatus   RowStatus,
+  componentLinkBandwidthStorageType StorageType
+}
+
+componentLinkBandwidthPriority OBJECT-TYPE
+   SYNTAX        TeLinkPriority
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the priority.  A value of 0 is valid
+        as specified in the 'Traffic Engineering (TE) Extensions to
+         OSPF Version 2' document."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203 and
+        Traffic Engineering (TE) Extensions to OSPF Version 2,
+        RFC 3630"
+   ::= { componentLinkBandwidthEntry 1 }
+
+componentLinkBandwidthUnreserved OBJECT-TYPE
+   SYNTAX        TeLinkBandwidth
+   UNITS         "bps"
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This attribute specifies the component link unreserved
+        bandwidth at priority p."
+   REFERENCE
+       "OSPF Extensions in Support of Generalized Multi-Protocol
+        Label Switching (GMPLS), RFC 4203"
+   ::= { componentLinkBandwidthEntry 2 }
+
+componentLinkBandwidthRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table.  No read-create object can
+        be modified when componentLinkBandwidthRowStatus is
+        active(1)."
+   ::= { componentLinkBandwidthEntry 3 }
+
+componentLinkBandwidthStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this conceptual row in the
+        componentLinkBandwidthTable.  Conceptual rows
+        having the value 'permanent' need not allow write-access
+        to any columnar object in the row."
+   ::= { componentLinkBandwidthEntry 4 }
+
+-- End of componentLinkBandwidthTable
+
+-- Module compliance
+
+teLinkCompliances
+   OBJECT IDENTIFIER ::= { teLinkConformance 1 }
+
+teLinkGroups
+   OBJECT IDENTIFIER ::= { teLinkConformance 2 }
+
+teLinkModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that support read-create
+        so that both configuration and monitoring of TE links can
+        be accomplished via this MIB module."
+   MODULE -- this module
+
+      MANDATORY-GROUPS    { teLinkGroup,
+                            teLinkBandwidthGroup,
+                            componentLinkBandwidthGroup }
+
+      GROUP teLinkSrlgGroup
+      DESCRIPTION
+          "This group is mandatory for GMPLS enabled devices."
+
+      GROUP teLinkPscGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support the
+           packet switching capability."
+
+      GROUP teLinkTdmGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support the TDM
+           switching capability."
+
+      -- teLinkTable
+
+      OBJECT      teLinkAddressType
+      SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2) }
+      DESCRIPTION
+          "Only ipv4(1) and ipv6(2) address types need to be
+           supported for numbered links.  For unnumbered links, the
+           unknown(0) address type needs to be supported."
+
+      OBJECT      teLinkLocalIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      DESCRIPTION
+          "Size of TE link IP address depends on type of TE link.
+           TE link IP address size is zero if the link is unnumbered,
+           four if the link IP address is IPv4, and sixteen if the
+           link IP address is IPv6."
+
+      OBJECT      teLinkRemoteIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      DESCRIPTION
+          "Size of TE link IP address depends on type of TE link.
+           TE link IP address size is zero if the link is unnumbered,
+           four if the link IP address is IPv4, and sixteen if the
+           link IP address is IPv6."
+
+      OBJECT      teLinkRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- teLinkDescriptorTable
+
+      OBJECT      teLinkDescrRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- teLinkSrlgTable
+
+      OBJECT      teLinkSrlgRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- teLinkBandwidthTable
+
+      OBJECT      teLinkBandwidthRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- componentLinkTable
+
+      OBJECT      componentLinkRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- componentLinkDescriptorTable
+
+      OBJECT      componentLinkDescrRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+
+      -- componentLinkBandwidthTable
+
+      OBJECT      componentLinkBandwidthRowStatus
+      SYNTAX      RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6) }
+      DESCRIPTION
+          "Support for notReady(3) and createAndWait(5) is
+           not required."
+   ::= { teLinkCompliances 1 }
+
+teLinkModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+       "Compliance statement for agents that support the
+        monitoring of the TE link MIB module."
+   MODULE -- this module
+
+      MANDATORY-GROUPS    { teLinkGroup,
+                            teLinkBandwidthGroup,
+                            componentLinkBandwidthGroup }
+
+      GROUP teLinkSrlgGroup
+      DESCRIPTION
+          "This group is mandatory for GMPLS enabled devices."
+
+      GROUP teLinkPscGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support the
+           packet switching capability."
+
+      GROUP teLinkTdmGroup
+      DESCRIPTION
+          "This group is mandatory for devices that support the TDM
+           switching capability."
+
+      -- teLinkTable
+
+      OBJECT      teLinkAddressType
+      SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Only ipv4(1) and ipv6(2) address types need to be
+           supported for numbered links.  For unnumbered links, the
+           unknown(0) address type needs to be supported."
+
+      OBJECT      teLinkLocalIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Size of TE link IP address depends on type of TE link.
+           TE link IP address size is zero if the link is unnumbered,
+           four if the link IP address is IPv4, and sixteen if the
+           link IP address is IPv6."
+
+      OBJECT      teLinkRemoteIpAddr
+      SYNTAX      InetAddress (SIZE(0|4|16))
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Size of TE link IP address depends on type of TE link.
+           TE link IP address size is zero if the link is unnumbered,
+           four if the link IP address is IPv4, and sixteen if the
+           link IP address is IPv6."
+
+      OBJECT      teLinkProtectionType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkWorkingPriority
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      teLinkStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- teLinkDescriptorTable
+
+      OBJECT      teLinkDescrSwitchingCapability
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrEncodingType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMinLspBandwidth
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio0
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio1
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio2
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio3
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio4
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio5
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio6
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrMaxLspBandwidthPrio7
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      teLinkDescrRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      teLinkDescrStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- teLinkSrlgTable
+
+      OBJECT      teLinkSrlgRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      teLinkSrlgStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- teLinkBandwidthTable
+
+      OBJECT      teLinkBandwidthRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      teLinkBandwidthStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- componentLinkTable
+
+      OBJECT      componentLinkMaxResBandwidth
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkPreferredProtection
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      componentLinkStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- componentLinkDescriptorTable
+
+      OBJECT      componentLinkDescrSwitchingCapability
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrEncodingType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMinLspBandwidth
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio0
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio1
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio2
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio3
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio4
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio5
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio6
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrMaxLspBandwidthPrio7
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrInterfaceMtu
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrIndication
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      componentLinkDescrRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+
+           only status that needs to be supported."
+
+      OBJECT      componentLinkDescrStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- componentLinkBandwidthTable
+
+      OBJECT      componentLinkBandwidthRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required and active(1) is the
+           only status that needs to be supported."
+
+      OBJECT      componentLinkBandwidthStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+   ::= { teLinkCompliances 2 }
+
+-- Units of conformance
+
+teLinkGroup OBJECT-GROUP
+   OBJECTS { teLinkAddressType,
+             teLinkLocalIpAddr,
+             teLinkRemoteIpAddr,
+             teLinkMetric,
+             teLinkProtectionType,
+             teLinkWorkingPriority,
+             teLinkResourceClass,
+             teLinkIncomingIfId,
+             teLinkOutgoingIfId,
+             teLinkRowStatus,
+             teLinkStorageType,
+             teLinkDescrSwitchingCapability,
+             teLinkDescrEncodingType,
+             teLinkDescrRowStatus,
+             teLinkDescrStorageType,
+             componentLinkPreferredProtection,
+             componentLinkCurrentProtection,
+             componentLinkRowStatus,
+             componentLinkStorageType,
+             componentLinkDescrSwitchingCapability,
+             componentLinkDescrEncodingType,
+             componentLinkDescrRowStatus,
+             componentLinkDescrStorageType
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for the management of
+           resources associated with TE links."
+   ::= { teLinkGroups 1 }
+
+teLinkSrlgGroup OBJECT-GROUP
+   OBJECTS { teLinkSrlgRowStatus,
+             teLinkSrlgStorageType
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for the management of
+           SRLG resources associated with TE links."
+   ::= { teLinkGroups 2 }
+
+teLinkBandwidthGroup OBJECT-GROUP
+   OBJECTS { teLinkMaximumReservableBandwidth,
+             teLinkDescrMaxLspBandwidthPrio0,
+             teLinkDescrMaxLspBandwidthPrio1,
+             teLinkDescrMaxLspBandwidthPrio2,
+             teLinkDescrMaxLspBandwidthPrio3,
+             teLinkDescrMaxLspBandwidthPrio4,
+             teLinkDescrMaxLspBandwidthPrio5,
+             teLinkDescrMaxLspBandwidthPrio6,
+             teLinkDescrMaxLspBandwidthPrio7,
+             teLinkBandwidthUnreserved,
+             teLinkBandwidthRowStatus,
+             teLinkBandwidthStorageType
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for the management of
+           the bandwidth resources associated with TE links and
+           component links."
+   ::= { teLinkGroups 3 }
+
+componentLinkBandwidthGroup OBJECT-GROUP
+   OBJECTS { componentLinkMaxResBandwidth,
+             componentLinkDescrMaxLspBandwidthPrio0,
+             componentLinkDescrMaxLspBandwidthPrio1,
+             componentLinkDescrMaxLspBandwidthPrio2,
+             componentLinkDescrMaxLspBandwidthPrio3,
+             componentLinkDescrMaxLspBandwidthPrio4,
+             componentLinkDescrMaxLspBandwidthPrio5,
+             componentLinkDescrMaxLspBandwidthPrio6,
+             componentLinkDescrMaxLspBandwidthPrio7,
+             componentLinkBandwidthUnreserved,
+             componentLinkBandwidthRowStatus,
+             componentLinkBandwidthStorageType
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for the management of the
+           bandwidth parameters associated with component links."
+   ::= { teLinkGroups 4 }
+
+teLinkPscGroup OBJECT-GROUP
+   OBJECTS { teLinkDescrMinLspBandwidth,
+             teLinkDescrInterfaceMtu,
+             componentLinkDescrMinLspBandwidth,
+             componentLinkDescrInterfaceMtu
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for devices that are
+           packet switch capable."
+   ::= { teLinkGroups 5 }
+
+teLinkTdmGroup OBJECT-GROUP
+   OBJECTS { teLinkDescrMinLspBandwidth,
+             teLinkDescrIndication,
+             componentLinkDescrMinLspBandwidth,
+             componentLinkDescrIndication
+           }
+   STATUS  current
+   DESCRIPTION
+          "Collection of objects needed for devices that are
+           TDM switching capable."
+   ::= { teLinkGroups 6 }
+
+-- End of TE-LINK-STD-MIB
+END
diff --git a/snmp_builder/mibs/TE-MIB.mib b/snmp_builder/mibs/TE-MIB.mib
new file mode 100644
index 0000000..96fe295
--- /dev/null
+++ b/snmp_builder/mibs/TE-MIB.mib
@@ -0,0 +1,1679 @@
+TE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    NOTIFICATION-TYPE, mib-2,
+    Integer32, Gauge32, Counter32,
+    Counter64, Unsigned32, TimeTicks     FROM SNMPv2-SMI
+
+    RowStatus, StorageType, TimeStamp,
+    TruthValue                           FROM SNMPv2-TC
+
+    SnmpAdminString                      FROM SNMP-FRAMEWORK-MIB
+
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                   FROM SNMPv2-CONF
+
+    TeHopAddress, TeHopAddressType,
+    MplsBitRate                          FROM MPLS-TC-STD-MIB;
+
+teMIB MODULE-IDENTITY
+    LAST-UPDATED "200501040000Z"         -- 01 January 2005
+    ORGANIZATION "IETF Traffic Engineering Working Group"
+    CONTACT-INFO "
+                  Editor:         Kireeti Kompella
+                          Postal: Juniper Networks, Inc.
+                                  1194 Mathilda Ave
+
+                                  Sunnyvale, CA 94089
+                          Tel:    +1 408 745 2000
+                          E-mail: kireeti@juniper.net
+
+                  The IETF Traffic Engineering Working Group is
+                  chaired by Jim Boyle and Ed Kern.
+
+                  WG Mailing List information:
+
+                    General Discussion: te-wg@ops.ietf.org
+                      To Subscribe:     te-wg-request@ops.ietf.org
+                         In Body:       subscribe
+                      Archive:          ftp://ops.ietf.org/pub/lists
+
+                  Comments on the MIB module should be sent to the
+                  mailing list.  The archives for this mailing list
+                  should be consulted for previous discussion on
+                  this MIB.
+                 "
+    DESCRIPTION  "The Traffic Engineering MIB module.
+
+                  Copyright (C) The Internet Society (2005).  This
+                  version of this MIB module is part of RFC 3970;
+                  see the RFC itself for full legal notices.
+                 "
+
+    -- revision history
+
+    REVISION     "200501040000Z"         -- 01 January 2005
+    DESCRIPTION  "Initial version, published as RFC 3970."
+    ::= { mib-2 122 }
+
+-- Top level objects
+
+teMIBNotifications  OBJECT IDENTIFIER ::= { teMIB 0 }
+teMIBObjects        OBJECT IDENTIFIER ::= { teMIB 1 }
+teMIBConformance    OBJECT IDENTIFIER ::= { teMIB 2 }
+
+-- ****************************************************************
+--
+-- TE MIB Objects
+--
+
+-- TE Info
+
+teInfo OBJECT IDENTIFIER ::= { teMIBObjects 1 }
+
+teDistProtocol   OBJECT-TYPE
+    SYNTAX       BITS {
+                     other(0),
+                     isis(1),
+                     ospf(2)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "IGP used to distribute Traffic Engineering
+                 information and topology to each device for the
+                 purpose of automatic path computation.  More than
+                 one IGP may be used to distribute TE information.
+                "
+    ::= { teInfo 1 }
+
+teSignalingProto OBJECT-TYPE
+    SYNTAX       BITS {
+                     other(0),
+                     rsvpte(1),
+                     crldp(2),
+                     static(3)    -- static configuration
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "Traffic Engineering signaling protocols supported
+                 by this device.  More than one protocol may be
+                 supported.
+                "
+    REFERENCE   "For a description of RSVP-TE, see RFC 3209;
+                 for CR-LDP, see RFC 3212.
+                "
+    ::= { teInfo 2 }
+
+teNotificationEnable OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "If this object is true, then it enables the
+                 generation of notifications from this MIB module.
+                 Otherwise notifications are not generated.
+                "
+    DEFVAL { false }
+    ::= { teInfo 3 }
+
+teNextTunnelIndex OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "An integer that may be used as a new Index in the
+
+                 teTunnelTable.
+
+                 The special value of 0 indicates that no more new
+                 entries can be created in that table.
+
+                 When this MIB module is used for configuration, this
+                 object always contains a legal value (if non-zero)
+                 for an index that is not currently used in that
+                 table.  The Command Generator (Network Management
+                 Application) reads this variable and uses the
+                 (non-zero) value read when creating a new row with
+                 an SNMP SET.  When the SET is performed, the Command
+                 Responder (agent) must determine whether the value
+                 is indeed still unused; Two Network Management
+                 Applications may attempt to create a row
+                 (configuration entry) simultaneously and use the
+                 same value.  If it is currently unused, the SET
+                 succeeds, and the Command Responder (agent) changes
+                 the value of this object according to an
+                 implementation-specific algorithm.  If the value is
+                 in use, however, the SET fails.  The Network
+                 Management Application must then re-read this
+                 variable to obtain a new usable value.
+                "
+    ::= { teInfo 4 }
+
+teNextPathHopIndex OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "An integer that may be used as a new Index in the
+                 tePathHopTable.
+
+                 The special value of 0 indicates that no more new
+                 entries can be created in that table.
+
+                 When this MIB module is used for configuration, this
+                 object always contains a legal value (if non-zero)
+                 for an index that is not currently used in that
+                 table.  The Command Generator (Network Management
+                 Application) reads this variable and uses the
+                 (non-zero) value read when creating a new row with
+                 an SNMP SET.  When the SET is performed, the Command
+                 Responder (agent) must determine whether the value
+                 is indeed still unused; Two Network Management
+                 Applications may attempt to create a row
+                 (configuration entry) simultaneously and use the
+                 same value.  If it is currently unused, the SET
+
+                 succeeds, and the Command Responder (agent) changes
+                 the value of this object according to an
+                 implementation-specific algorithm.  If the value is
+                 in use, however, the SET fails.  The Network
+                 Management Application must then re-read this
+                 variable to obtain a new usable value.
+                "
+    ::= { teInfo 5 }
+
+teConfiguredTunnels OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "Number of currently configured Tunnels."
+    ::= { teInfo 6 }
+
+teActiveTunnels  OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "Number of currently active Tunnels."
+    ::= { teInfo 7 }
+
+tePrimaryTunnels OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "Number of currently active Tunnels running on
+                 their primary paths.
+                "
+    ::= { teInfo 8 }
+
+teAdminGroupTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TeAdminGroupEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A mapping of configured administrative groups.  Each
+                 entry represents an Administrative Group and
+                 provides a name and index for the group.
+                 Administrative groups are used to label links in the
+                 Traffic Engineering topology in order to place
+                 constraints (include and exclude) on Tunnel paths.
+
+                 A groupName can only be linked to one group number.
+                 The groupNumber is the number assigned to the
+                 administrative group used in constraints,
+                 such as tePathIncludeAny or tePathIncludeAll.
+                "
+    ::= { teInfo 9 }
+
+teAdminGroupEntry OBJECT-TYPE
+    SYNTAX       TeAdminGroupEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A mapping between a configured group number and
+                 its human-readable name.  The group number should
+                 be between 1 and 32, inclusive.  Group number n
+                 represents bit number (n-1) in the bit vector for
+                 Include/Exclude constraints.
+
+                 All entries in this table MUST be kept in stable
+                 storage so that they will re-appear in case of a
+                 restart/reboot.
+                "
+    INDEX       { teAdminGroupNumber }
+    ::= { teAdminGroupTable 1 }
+
+TeAdminGroupEntry ::=
+    SEQUENCE {
+        teAdminGroupNumber    Integer32,
+        teAdminGroupName      SnmpAdminString,
+        teAdminGroupRowStatus RowStatus
+    }
+
+teAdminGroupNumber OBJECT-TYPE
+    SYNTAX       Integer32 (1..32)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Index of the administrative group."
+    ::= { teAdminGroupEntry 1 }
+
+teAdminGroupName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Name of the administrative group."
+    ::= { teAdminGroupEntry 2 }
+
+teAdminGroupRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 The value of this object has no effect on whether
+                 other objects in this conceptual row can be
+
+                 modified.
+                "
+    ::= { teAdminGroupEntry 3 }
+
+-- Tunnel Table
+
+teTunnelTable    OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TeTunnelEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Table of Configured Traffic Tunnels."
+    ::= { teMIBObjects 2 }
+
+teTunnelEntry    OBJECT-TYPE
+    SYNTAX       TeTunnelEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Entry containing information about a particular
+                 Traffic Tunnel.
+                "
+    INDEX       { teTunnelIndex }
+    ::= { teTunnelTable 1 }
+
+TeTunnelEntry ::=
+    SEQUENCE {
+        teTunnelIndex                   Unsigned32,
+        teTunnelName                    SnmpAdminString,
+        teTunnelNextPathIndex           Unsigned32,
+     -- Conceptual row information:
+        teTunnelRowStatus               RowStatus,
+        teTunnelStorageType             StorageType,
+     -- Address information:
+        teTunnelSourceAddressType       TeHopAddressType,
+        teTunnelSourceAddress           TeHopAddress,
+        teTunnelDestinationAddressType  TeHopAddressType,
+        teTunnelDestinationAddress      TeHopAddress,
+     -- State/performance information:
+        teTunnelState                   INTEGER,
+        teTunnelDiscontinuityTimer      TimeStamp,
+        teTunnelOctets                  Counter64,
+        teTunnelPackets                 Counter64,
+        teTunnelLPOctets                Counter32,
+        teTunnelLPPackets               Counter32,
+        teTunnelAge                     TimeTicks,
+        teTunnelTimeUp                  TimeTicks,
+        teTunnelPrimaryTimeUp           TimeTicks,
+        teTunnelTransitions             Counter32,
+        teTunnelLastTransition          TimeTicks,
+        teTunnelPathChanges             Counter32,
+        teTunnelLastPathChange          TimeTicks,
+        teTunnelConfiguredPaths         Gauge32,
+        teTunnelStandbyPaths            Gauge32,
+        teTunnelOperationalPaths        Gauge32
+    }
+
+teTunnelIndex    OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A unique index that identifies a Tunnel.  If the TE
+                 Tunnel is considered an interface, then this index
+                 must match the interface index of the corresponding
+                 interface.  Otherwise, this index must be at least
+                 2^24, so that it does not overlap with any existing
+                 interface index.
+                "
+    ::= { teTunnelEntry 1 }
+
+teTunnelName     OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Name of the Traffic Tunnel.
+
+                 Note that the name of a Tunnel MUST be unique.
+                 When a SET request contains a name that is already
+                 in use for another entry, then the implementation
+                 must return an inconsistentValue error.
+
+                 The value of this object cannot be changed if the
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { teTunnelEntry 2 }
+
+teTunnelNextPathIndex  OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "An integer that may be used as a new Index for the
+                 next Path in this Tunnel.
+
+                 The special value of 0 indicates that no more Paths
+                 can be created for this Tunnel, or that no more new
+                 entries can be created in tePathTable.
+
+                 When this MIB module is used for configuration, this
+                 object always contains a legal value (if non-zero)
+                 for an index that is not currently used in that
+                 table.  The Command Generator (Network Management
+                 Application) reads this variable and uses the
+                 (non-zero) value read when creating a new row with
+                 an SNMP SET.  When the SET is performed, the Command
+                 Responder (agent) must determine whether the value
+                 is indeed still unused; Two Network Management
+                 Applications may attempt to create a row
+                 (configuration entry) simultaneously and use the
+                 same value.  If it is currently unused, the SET
+                 succeeds, and the Command Responder (agent) changes
+                 the value of this object according to an
+                 implementation-specific algorithm.  If the value is
+                 in use, however, the SET fails.  The Network
+                 Management Application must then re-read this
+                 variable to obtain a new usable value.
+                "
+    ::= { teTunnelEntry 3 }
+
+teTunnelRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 When the value of this object is 'active', then
+                 the values for the corresponding objects
+                 teTunnelName, teTunnelSourceAddressType,
+                 teTunnelSourceAddress,
+                 teTunnelDestinationAddressType, and
+                 teTunnelDestinationAddress cannot be changed.
+                "
+    ::= { teTunnelEntry 4 }
+
+teTunnelStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' need
+                 not allow write-access to any columnar objects
+                 in the row.
+                "
+    ::= { teTunnelEntry 5 }
+
+teTunnelSourceAddressType OBJECT-TYPE
+    SYNTAX       TeHopAddressType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The type of Traffic Engineered Tunnel hop address
+                 for the source of this Tunnel.  Typically, this
+                 address type is IPv4 or IPv6, with a prefix length
+                 of 32 or 128, respectively.  If the TE Tunnel path
+                 is being computed by a path computation server,
+                 however, it is possible to use more flexible source
+                 address types, such as AS numbers or prefix lengths
+                 less than host address lengths.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { teTunnelEntry 6 }
+
+teTunnelSourceAddress OBJECT-TYPE
+    SYNTAX       TeHopAddress
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The Source Traffic Engineered Tunnel hop address of
+                 this Tunnel.
+
+                 The type of this address is determined by the value
+                 of the corresponding teTunnelSourceAddressType.
+
+                 Note that the source and destination addresses of a
+                 Tunnel can be different address types.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { teTunnelEntry 7 }
+
+teTunnelDestinationAddressType OBJECT-TYPE
+    SYNTAX       TeHopAddressType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The type of Traffic Engineered Tunnel hop address
+                 for the destination of this Tunnel.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { teTunnelEntry 8 }
+
+teTunnelDestinationAddress OBJECT-TYPE
+    SYNTAX       TeHopAddress
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The Destination Traffic Engineered Tunnel hop
+                 address of this Tunnel.
+
+                 The type of this address is determined by the value
+                 of the corresponding teTunnelDestinationAddressType.
+
+                 Note that source and destination addresses of a
+                 Tunnel can be different address types.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { teTunnelEntry 9 }
+
+teTunnelState    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     unknown(1),
+                     up(2),
+                     down(3),
+                     testing(4)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The operational state of the Tunnel."
+    ::= { teTunnelEntry 10 }
+
+teTunnelDiscontinuityTimer OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The value of sysUpTime on the most recent occasion
+                 at which any one or more of this tunnel's counters
+                 suffered a discontinuity.  The relevant counters
+                 are teTunnelOctets, teTunnelPackets,
+                 teTunnelLPOctets, and teTunnelLPPackets.  If no such
+                 discontinuities have occurred since the last
+                 re-initialization of the local management subsystem
+                 then this object contains a zero value.
+                "
+    ::= { teTunnelEntry 11 }
+
+teTunnelOctets   OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of octets that have been forwarded over
+                 the Tunnel.
+
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system,
+                 and at other times, as indicated by the value of
+                 teTunnelDiscontinuityTimer.
+                "
+    ::= { teTunnelEntry 12 }
+
+teTunnelPackets  OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of packets that have been forwarded over
+                 the Tunnel.
+
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system
+                 and at other times, as indicated by the value of
+                 teTunnelDiscontinuityTimer.
+                "
+    ::= { teTunnelEntry 13 }
+
+teTunnelLPOctets OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of octets that have been forwarded over
+                 the Tunnel.
+
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system
+                 and at other times, as indicated by the value of
+                 teTunnelDiscontinuityTimer.
+                "
+    ::= { teTunnelEntry 14 }
+
+teTunnelLPPackets OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of packets that have been forwarded over
+                 the Tunnel.
+
+                 Discontinuities in the value of this counter can
+                 occur at re-initialization of the management system
+                 and at other times, as indicated by the value of
+                 teTunnelDiscontinuityTimer.
+                "
+    ::= { teTunnelEntry 15 }
+
+teTunnelAge      OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The age (i.e., time from creation of this conceptual
+                 row till now) of this Tunnel in hundredths of a
+                 second.  Note that because TimeTicks wrap in about
+                 16 months, this value is best used in interval
+                 measurements.
+                "
+    ::= { teTunnelEntry 16 }
+
+teTunnelTimeUp   OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total time in hundredths of a second that this
+                 Tunnel has been operational.  Note that because
+                 TimeTicks wrap in about 16 months, this value is
+                 best used in interval measurements.
+
+                 An example of usage of this object would be to
+                 compute the percentage up time over a period of time
+                 by obtaining values of teTunnelAge and
+                 teTunnelTimeUp at two points in time and computing
+                 the following ratio:
+                 ((teTunnelTimeUp2 - teTunnelTimeUp1)/
+                 (teTunnelAge2 - teTunnelAge1)) * 100 %.  In doing
+                 so, the management station must account for
+                 wrapping of the values of teTunnelAge and
+                 teTunnelTimeUp between the two measurements.
+                "
+    ::= { teTunnelEntry 17 }
+
+teTunnelPrimaryTimeUp OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total time in hundredths of a second that this
+                 Tunnel's primary path has been operational.  Note
+                 that because TimeTicks wrap in about 16 months, this
+
+                 value is best used in interval measurements.
+
+                 An example of usage of this field would be to
+                 compute what percentage of time that a TE Tunnel was
+                 on the primary path over a period of time by
+                 computing
+                 ((teTunnelPrimaryTimeUp2 - teTunnelPrimaryTimeUp1)/
+                 (teTunnelTimeUp2 - teTunnelTimeUp1))*100 %.  In
+                 doing so, the management station must account for
+                 wrapping of the values of teTunnelPrimaryTimeUp and
+                 teTunnelTimeUp between the two measurements.
+                "
+    ::= { teTunnelEntry 18 }
+
+teTunnelTransitions OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of operational state transitions
+                 (up -> down and down -> up) this Tunnel has
+                 undergone.
+                "
+    ::= { teTunnelEntry 19 }
+
+teTunnelLastTransition OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The time in hundredths of a second since the last
+                 operational state transition occurred on this
+                 Tunnel.
+
+                 Note that if the last transition was over 16
+                 months ago, this value will be inaccurate.
+                "
+    ::= { teTunnelEntry 20 }
+
+teTunnelPathChanges OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of path changes this Tunnel has had."
+    ::= { teTunnelEntry 21 }
+
+teTunnelLastPathChange OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The time in hundredths of a second since the last
+                 path change occurred on this Tunnel.
+
+                 Note that if the last transition was over 16
+                 months ago, this value will be inaccurate.
+
+                 Path changes may be caused by network events or by
+                 reconfiguration that affects the path.
+                "
+    ::= { teTunnelEntry 22 }
+
+teTunnelConfiguredPaths OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of paths configured for this Tunnel."
+    ::= { teTunnelEntry 23 }
+
+teTunnelStandbyPaths OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of standby paths configured for this
+                 Tunnel.
+                "
+    ::= { teTunnelEntry 24 }
+
+teTunnelOperationalPaths OBJECT-TYPE
+    SYNTAX       Gauge32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of operational paths for this Tunnel.
+                 This includes the path currently active, as
+                 well as operational standby paths.
+                "
+    ::= { teTunnelEntry 25 }
+
+-- ****************************************************************
+--
+-- Tunnel Path Table
+--
+
+tePathTable      OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TePathEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Table of Configured Traffic Tunnels."
+    ::= { teMIBObjects 3 }
+
+tePathEntry      OBJECT-TYPE
+    SYNTAX       TePathEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Entry containing information about a particular
+                 Traffic Tunnel.  Each Traffic Tunnel can have zero
+                 or more Traffic Paths.
+
+                 As a Traffic Path can only exist over an existing
+                 Traffic Tunnel, all tePathEntries with
+                 a value of n for teTunnelIndex MUST be removed by
+                 the implementation when the corresponding
+                 teTunnelEntry with a value of n for teTunnelIndex
+                 is removed.
+                "
+    INDEX       { teTunnelIndex, tePathIndex }
+    ::= { tePathTable 1 }
+
+TePathEntry ::=
+    SEQUENCE {
+        tePathIndex                Unsigned32,
+        tePathName                 SnmpAdminString,
+     -- Conceptual row information
+        tePathRowStatus            RowStatus,
+        tePathStorageType          StorageType,
+     -- Path properties
+        tePathType                 INTEGER,
+        tePathConfiguredRoute      Unsigned32,
+        tePathBandwidth            MplsBitRate,
+        tePathIncludeAny           Unsigned32,
+        tePathIncludeAll           Unsigned32,
+        tePathExclude              Unsigned32,
+        tePathSetupPriority        Integer32,
+        tePathHoldPriority         Integer32,
+        tePathProperties           BITS,
+     -- Path status
+        tePathOperStatus           INTEGER,
+        tePathAdminStatus          INTEGER,
+        tePathComputedRoute        Unsigned32,
+        tePathRecordedRoute        Unsigned32
+    }
+
+tePathIndex      OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An index that uniquely identifies a path within
+                 a Tunnel.
+
+                 The combination of <teTunnelIndex, tePathIndex> thus
+                 uniquely identifies a path among all paths on this
+                 router.
+                "
+    ::= { tePathEntry 1 }
+
+tePathName       OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The name of this path.
+
+                 A pathName must be unique within the set of paths
+                 over a single tunnel.  If a SET request is received
+                 with a duplicate name, then the implementation MUST
+                 return an inconsistentValue error.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { tePathEntry 2 }
+
+tePathRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 When the value of this object is 'active', then
+                 the value of tePathName cannot be changed.  All
+                 other writable objects may be changed; however,
+                 these changes may affect traffic going over the TE
+                 tunnel or require the path to be computed and/or
+                 re-signaled.
+                "
+    ::= { tePathEntry 3 }
+
+tePathStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' need
+                 not allow write-access to any columnar objects
+                 in the row.
+                "
+    ::= { tePathEntry 4 }
+
+tePathType OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     other(1),
+                     primary(2),
+                     standby(3),
+                     secondary(4)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The type for this PathEntry; i.e., whether this path
+                 is a primary path, a standby path, or a secondary
+                 path.
+                "
+    ::= { tePathEntry 5 }
+
+tePathConfiguredRoute OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The route that this TE path is configured to follow;
+                 i.e., an ordered list of hops.  The value of this
+                 object gives the primary index into the Hop Table.
+                 The secondary index is the hop count in the path, so
+                 to get the route, one could get the first hop with
+                 index <tePathConfiguredRoute, 1> in the Hop Table
+                 and do a getnext to get subsequent hops.
+                "
+    ::= { tePathEntry 6 }
+
+tePathBandwidth  OBJECT-TYPE
+    SYNTAX       MplsBitRate
+    UNITS       "Kilobits per second"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The configured bandwidth for this Tunnel,
+                 in units of thousands of bits per second (Kbps).
+                "
+    DEFVAL      { 0 }
+    ::= { tePathEntry 7 }
+
+tePathIncludeAny OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "This is a configured set of administrative groups
+                 specified as a bit vector (i.e., bit n is 1 if group
+
+                 n is in the set, where n = 0 is the LSB).  For each
+                 link that this path goes through, the link must have
+                 at least one of the groups specified in IncludeAny
+                 to be acceptable.  If IncludeAny is zero, all links
+                 are acceptable.
+                "
+    DEFVAL      { 0 }
+    ::= { tePathEntry 8 }
+
+tePathIncludeAll OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "This is a configured set of administrative groups
+                 specified as a bit vector (i.e., bit n is 1 if group
+                 n is in the set, where n = 0 is the LSB).  For each
+                 link that this path goes through, the link must have
+                 all of the groups specified in IncludeAll to be
+                 acceptable.  If IncludeAll is zero, all links are
+                 acceptable.
+                "
+    DEFVAL      { 0 }
+    ::= { tePathEntry 9 }
+
+tePathExclude    OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "This is a configured set of administrative groups
+                 specified as a bit vector (i.e., bit n is 1 if group
+                 n is in the set, where n = 0 is the LSB).  For each
+                 link that this path goes through, the link MUST have
+                 groups associated with it, and the intersection of
+                 the link's groups and the 'exclude' set MUST be
+                 null.
+                "
+    DEFVAL      { 0 }
+    ::= { tePathEntry 10 }
+
+tePathSetupPriority OBJECT-TYPE
+    SYNTAX       Integer32 (0..7)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The setup priority configured for this path, with 0
+                 as the highest priority and 7 as the lowest.
+                "
+    DEFVAL      { 7 }
+    ::= { tePathEntry 11 }
+
+tePathHoldPriority OBJECT-TYPE
+    SYNTAX       Integer32 (0..7)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The hold priority configured for this path, with 0
+                 as the highest priority and 7 as the lowest.
+                "
+    DEFVAL      { 0 }
+    ::= { tePathEntry 12 }
+
+tePathProperties OBJECT-TYPE
+    SYNTAX       BITS {
+                     recordRoute(0),
+                     cspf(1),
+                     makeBeforeBreak(2),
+                     mergeable(3),
+                     fastReroute(4),
+                     protected(5)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The set of configured properties for this path,
+                 expressed as a bit map.  For example, if the path
+                 supports 'make before break', then bit 2 is set.
+                "
+    ::= { tePathEntry 13 }
+
+tePathOperStatus OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     unknown(0),
+                     down(1),
+                     testing(2),
+                     dormant(3),
+                     ready(4),
+                     operational(5)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The operational status of the path:
+                 unknown:
+                 down:        Signaling failed.
+                 testing:     Administratively set aside for testing.
+                 dormant:     Not signaled (for a backup tunnel).
+                 ready:       Signaled but not yet carrying traffic.
+                 operational: Signaled and carrying traffic.
+                "
+    ::= { tePathEntry 14 }
+
+tePathAdminStatus OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     normal(1),
+                     testing(2)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The operational status of the path:
+                 normal:      Used normally for forwarding.
+                 testing:     Administratively set aside for testing.
+                "
+    ::= { tePathEntry 15 }
+
+tePathComputedRoute OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The route computed for this path, perhaps using
+                 some form of Constraint-based Routing.  The
+                 algorithm is implementation dependent.
+
+                 This object returns the computed route as an ordered
+                 list of hops.  The value of this object gives the
+                 primary index into the Hop Table.  The secondary
+                 index is the hop count in the path, so to get the
+                 route, one could get the first hop with index
+                 <tePathComputedRoute, 1> in the Hop Table and do a
+                 getnext to get subsequent hops.
+
+                 A value of zero (0) means there is no computedRoute.
+                "
+    ::= { tePathEntry 16 }
+
+tePathRecordedRoute OBJECT-TYPE
+    SYNTAX       Unsigned32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The route actually used for this path, as recorded
+                 by the signaling protocol.  This is again an ordered
+                 list of hops; each hop is expected to be strict.
+
+                 The value of this object gives the primary index
+                 into the Hop Table.  The secondary index is the hop
+                 count in the path, so to get the route, one can get
+                 the first hop with index <tePathRecordedRoute, 1>
+                 in the Hop Table and do a getnext to get subsequent
+
+                 hops.
+
+                 A value of zero (0) means there is no recordedRoute.
+                "
+    ::= { tePathEntry 17 }
+
+-- ****************************************************************
+--
+-- Tunnel Path Hop Table
+--
+
+tePathHopTable   OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TePathHopEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Table of Tunnel Path Hops."
+    ::= { teMIBObjects 4 }
+
+tePathHopEntry   OBJECT-TYPE
+    SYNTAX       TePathHopEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Entry containing information about a particular
+                 hop.
+                "
+    INDEX       { teHopListIndex, tePathHopIndex }
+    ::= { tePathHopTable 1 }
+
+TePathHopEntry ::=
+    SEQUENCE {
+        teHopListIndex              Unsigned32,
+        tePathHopIndex              Unsigned32,
+     -- Conceptual row information
+        tePathHopRowStatus          RowStatus,
+        tePathHopStorageType        StorageType,
+        tePathHopAddrType           TeHopAddressType,
+        tePathHopAddress            TeHopAddress,
+        tePathHopType               INTEGER
+    }
+
+teHopListIndex   OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An index that identifies a list of hops.  This is
+                 the primary index to access hops.
+                "
+    ::= { tePathHopEntry 1 }
+
+tePathHopIndex   OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4294967295)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An index that identifies a particular hop among the
+                 list of hops for a path.  An index of i identifies
+                 the ith hop.  This is the secondary index for a hop
+                 entry.
+                "
+    ::= { tePathHopEntry 2 }
+
+tePathHopRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 Any field in this table can be changed, even if the
+                 value of this object is 'active'.  However, such a
+                 change may cause traffic to be rerouted or even
+                 disrupted.
+                "
+    ::= { tePathHopEntry 3 }
+
+tePathHopStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' need
+                 not allow write-access to any columnar objects
+                 in the row.
+                "
+    ::= { tePathHopEntry 4 }
+
+tePathHopAddrType OBJECT-TYPE
+    SYNTAX       TeHopAddressType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The type of Traffic Engineered Tunnel hop Address
+                 of this hop.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding tePathRowStatus
+                 object is 'active'.
+                "
+    ::= { tePathHopEntry 5 }
+
+tePathHopAddress OBJECT-TYPE
+    SYNTAX       TeHopAddress
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The Traffic Engineered Tunnel hop Address of this
+                 hop.
+
+                 The type of this address is determined by the value
+                 of the corresponding tePathHopAddressType.
+
+                 The value of this object cannot be changed
+                 if the value of the corresponding teTunnelRowStatus
+                 object is 'active'.
+                "
+    ::= { tePathHopEntry 6 }
+
+tePathHopType    OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     unknown(0),
+                     loose(1),
+                     strict(2)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The type of hop:
+                 unknown:
+                 loose:    This hop is a LOOSE hop.
+                 strict:   This hop is a STRICT hop.
+                "
+    ::= { tePathHopEntry 7 }
+
+-- ****************************************************************
+--
+-- TE Notifications
+--
+
+teTunnelUp       NOTIFICATION-TYPE
+    OBJECTS      { teTunnelName,
+                   tePathName }  -- TunnelPath
+    STATUS       current
+    DESCRIPTION "A teTunnelUp notification is generated when the
+                 Tunnel indexed by teTunnelName transitions to the
+                 'up' state.
+
+                 A tunnel is up when at least one of its paths is up.
+                 The tePathName is the name of the path whose
+                 transition to up made the tunnel go up.
+
+                 This notification MUST be limited to at most one
+                 every minute, in case the tunnel flaps up and down.
+                "
+    ::= { teMIBNotifications 1 }
+
+teTunnelDown     NOTIFICATION-TYPE
+    OBJECTS      { teTunnelName,
+                   tePathName }  -- TunnelPath
+    STATUS       current
+    DESCRIPTION "A teTunnelDown notification is generated when the
+                 Tunnel indexed by teTunnelName transitions to the
+                 'down' state.
+
+                 A tunnel is up when at least one of its paths is up.
+                 The tePathName is the name of the path whose
+                 transition to down made the tunnel go down.
+
+                 This notification MUST be limited to at most one
+                 every minute, in case the tunnel flaps up and down.
+                "
+    ::= { teMIBNotifications 2 }
+
+teTunnelChanged  NOTIFICATION-TYPE
+    OBJECTS      { teTunnelName,
+                   tePathName }  -- toTunnelPath
+    STATUS       current
+    DESCRIPTION "A teTunnelChanged notification is generated when an
+                 active path on the Tunnel indexed by teTunnelName
+                 changes or a new path becomes active.  The value
+                 of tePathName is the new active path.
+
+                 This notification MUST be limited to at most one
+                 every minute, in case the tunnel changes quickly.
+                "
+    ::= { teMIBNotifications 3 }
+
+teTunnelRerouted NOTIFICATION-TYPE
+    OBJECTS      { teTunnelName,
+                   tePathName }  -- toTunnelPath
+    STATUS       current
+    DESCRIPTION "A teTunnelRerouted notification is generated when
+                 an active path for the Tunnel indexed by
+                 teTunnelName stays the same, but its route changes.
+
+                 This notification MUST be limited to at most one
+                 every minute, in case the tunnel reroutes quickly.
+                "
+    ::= { teMIBNotifications 4 }
+
+-- End of TE-MIB objects
+
+-- ****************************************************************
+--
+-- TE Compliance Statements
+--
+
+teGroups
+    OBJECT IDENTIFIER ::= { teMIBConformance 1 }
+
+teModuleCompliance
+    OBJECT IDENTIFIER ::= { teMIBConformance 2 }
+
+-- ****************************************************************
+--
+-- TE object groups
+--
+
+teTrafficEngineeringGroup OBJECT-GROUP
+    OBJECTS {
+        teTunnelName,
+        teTunnelNextPathIndex,
+        teTunnelRowStatus,
+        teTunnelStorageType,
+        teTunnelSourceAddressType,
+        teTunnelSourceAddress,
+        teTunnelDestinationAddressType,
+        teTunnelDestinationAddress,
+        teTunnelState,
+        teTunnelDiscontinuityTimer,
+        teTunnelOctets,
+        teTunnelPackets,
+        teTunnelLPOctets,
+        teTunnelLPPackets,
+        teTunnelAge,
+        teTunnelTimeUp,
+        teTunnelPrimaryTimeUp,
+        teTunnelTransitions,
+        teTunnelLastTransition,
+        teTunnelPathChanges,
+        teTunnelLastPathChange,
+        teTunnelConfiguredPaths,
+        teTunnelStandbyPaths,
+        teTunnelOperationalPaths,
+        tePathBandwidth,
+        tePathIncludeAny,
+        tePathIncludeAll,
+        tePathExclude,
+        tePathSetupPriority,
+        tePathHoldPriority,
+        tePathProperties,
+        tePathOperStatus,
+        tePathAdminStatus,
+        tePathComputedRoute,
+        tePathRecordedRoute,
+        teDistProtocol,
+        teSignalingProto,
+        teNotificationEnable,
+        teNextTunnelIndex,
+        teNextPathHopIndex,
+        teAdminGroupName,
+        teAdminGroupRowStatus,
+        teConfiguredTunnels,
+        teActiveTunnels,
+        tePrimaryTunnels,
+        tePathName,
+        tePathType,
+        tePathRowStatus,
+        tePathStorageType,
+        tePathConfiguredRoute,
+        tePathHopRowStatus,
+        tePathHopStorageType,
+        tePathHopAddrType,
+        tePathHopAddress,
+        tePathHopType
+    }
+    STATUS       current
+    DESCRIPTION "Objects for Traffic Engineering in this MIB module."
+    ::= { teGroups 1 }
+
+teNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+       teTunnelUp,
+       teTunnelDown,
+       teTunnelChanged,
+       teTunnelRerouted
+   }
+   STATUS       current
+   DESCRIPTION "Notifications specified in this MIB module."
+   ::= { teGroups 2 }
+
+-- ****************************************************************
+--
+-- TE compliance statements
+--
+--    There are four compliance statements: read-only and full
+
+--    compliance for regular TE devices, and read-only and full
+--    compliance for path computation servers.
+--
+
+teModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "When this MIB module is implemented without support
+                 for read-create (i.e., in read-only mode), then such
+                 an implementation can claim read-only compliance.
+                 Such a device can be monitored but cannot be
+                 configured with this MIB module.
+                "
+
+    MODULE       -- enclosing module, i.e., TE-MIB
+
+        MANDATORY-GROUPS {
+            teTrafficEngineeringGroup
+        }
+
+        GROUP        teNotificationGroup
+        DESCRIPTION "Implementation of this group is optional."
+
+        OBJECT       teNotificationEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teAdminGroupName
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teAdminGroupRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelName
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelSourceAddressType
+        SYNTAX       TeHopAddressType { ipv4(1), ipv6(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required.  An
+                     implementation is only required to support
+                     IPv4 and IPv6 host addresses."
+
+        OBJECT       teTunnelSourceAddress
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelDestinationAddressType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelDestinationAddress
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathName
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathConfiguredRoute
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathBandwidth
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathIncludeAny
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathIncludeAll
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathExclude
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathSetupPriority
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHoldPriority
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathProperties
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathAdminStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopAddrType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopAddress
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+    ::= { teModuleCompliance 1 }
+
+teModuleFullCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "When this MIB module is implemented with support for
+                 read-create, then the implementation can claim
+                 full compliance.  Such devices can be both
+
+                 monitored and configured with this MIB module.
+                "
+
+    MODULE       -- enclosing module, i.e., TE-MIB
+
+        MANDATORY-GROUPS {
+            teTrafficEngineeringGroup
+        }
+
+        GROUP        teNotificationGroup
+        DESCRIPTION "Implementation of this group is optional."
+
+        OBJECT       teAdminGroupRowStatus
+        SYNTAX       RowStatus { active(1) }
+        WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+        DESCRIPTION "Support for notInService, createAndWait and
+                     notReady is not required.
+                    "
+
+        OBJECT       teTunnelRowStatus
+        SYNTAX       RowStatus { active(1), notInService(2) }
+        WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                                 createAndGo(4), destroy(6)
+                               }
+        DESCRIPTION "Support for createAndWait and notReady is not
+                     required.
+                    "
+
+        OBJECT       teTunnelSourceAddressType
+        SYNTAX       TeHopAddressType { ipv4(1), ipv6(2) }
+        DESCRIPTION "Write access is required.  An implementation is
+                     only required to support IPv4 and IPv6 host
+                     addresses.
+                    "
+
+        OBJECT       tePathRowStatus
+        SYNTAX       RowStatus { active(1), notInService(2) }
+        WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                                 createAndGo(4), destroy(6)
+                               }
+        DESCRIPTION "Support for createAndWait and notReady is not
+                     required.
+                    "
+
+        OBJECT       tePathHopRowStatus
+        SYNTAX       RowStatus { active(1), notInService(2) }
+        WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                                 createAndGo(4), destroy(6)
+                               }
+        DESCRIPTION "Support for createAndWait and notReady is not
+                     required.
+                    "
+    ::= { teModuleCompliance 2 }
+
+teModuleServerReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "When this MIB module is implemented by a path
+                 computation server without support for read-create
+                 (i.e., in read-only mode), then the implementation
+                 can claim read-only compliance.  Such
+                 a device can be monitored but cannot be
+                 configured with this MIB module.
+                "
+
+    MODULE       -- enclosing module, i.e., TE-MIB
+
+        MANDATORY-GROUPS {
+            teTrafficEngineeringGroup
+        }
+
+        GROUP        teNotificationGroup
+        DESCRIPTION "Implementation of this group is optional."
+
+        OBJECT       teNotificationEnable
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teAdminGroupName
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teAdminGroupRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelName
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelSourceAddressType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required.  A path
+                     computation server SHOULD implement all types
+                     of tunnel source address types.
+                    "
+
+        OBJECT       teTunnelSourceAddress
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelDestinationAddressType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       teTunnelDestinationAddress
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathName
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathConfiguredRoute
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathBandwidth
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathIncludeAny
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathIncludeAll
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathExclude
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathSetupPriority
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHoldPriority
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathProperties
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathAdminStatus
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopRowStatus
+        SYNTAX       RowStatus { active(1) }
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopStorageType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopAddrType
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+
+        OBJECT       tePathHopAddress
+        MIN-ACCESS   read-only
+        DESCRIPTION "Write access is not required."
+    ::= { teModuleCompliance 3 }
+
+teModuleServerFullCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "When this MIB module is implemented by a path
+                 computation server with support for read-create,
+                 then the implementation can claim full
+                 compliance.
+                "
+
+    MODULE       -- enclosing module, i.e., TE-MIB
+        MANDATORY-GROUPS {
+            teTrafficEngineeringGroup
+        }
+
+        GROUP        teNotificationGroup
+        DESCRIPTION "Implementation of this group is optional."
+
+        OBJECT       teAdminGroupRowStatus
+        SYNTAX       RowStatus { active(1) }
+        WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+        DESCRIPTION "Support for notInService, createAndWait, and
+                     notReady is not required.
+                    "
+
+        OBJECT       teTunnelRowStatus
+        SYNTAX       RowStatus { active(1), notInService(2) }
+        WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                                 createAndGo(4), destroy(6)
+                               }
+        DESCRIPTION "Support for createAndWait and notReady is not
+                     required.
+                    "
+
+        OBJECT       teTunnelSourceAddressType
+        DESCRIPTION "Write access is required.  An implementation
+                     of a path computation server SHOULD support all
+                     types of tunnel source address types.
+                    "
+
+        OBJECT       tePathRowStatus
+        SYNTAX       RowStatus { active(1), notInService(2) }
+        WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                                 createAndGo(4), destroy(6)
+                               }
+        DESCRIPTION "Support for createAndWait and notReady is not
+                     required.
+                    "
+
+        OBJECT       tePathHopRowStatus
+        SYNTAX       RowStatus { active(1), notInService(2) }
+        WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                                 createAndGo(4), destroy(6)
+                               }
+        DESCRIPTION "Support for createAndWait and notReady is not
+                     required.
+                    "
+    ::= { teModuleCompliance 4 }
+
+END
diff --git a/snmp_builder/mibs/TIME-AGGREGATE-MIB.mib b/snmp_builder/mibs/TIME-AGGREGATE-MIB.mib
new file mode 100644
index 0000000..3b3baea
--- /dev/null
+++ b/snmp_builder/mibs/TIME-AGGREGATE-MIB.mib
@@ -0,0 +1,375 @@
+   TIME-AGGREGATE-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+      MODULE-IDENTITY,  experimental,
+      OBJECT-TYPE,      Opaque, Integer32
+                 FROM SNMPv2-SMI
+      OwnerString
+                 FROM RMON-MIB
+      RowStatus, StorageType, TEXTUAL-CONVENTION
+                 FROM SNMPv2-TC
+      MODULE-COMPLIANCE, OBJECT-GROUP
+                 FROM SNMPv2-CONF
+      SnmpAdminString
+                 FROM SNMP-FRAMEWORK-MIB;
+
+  tAggrMIB MODULE-IDENTITY
+       LAST-UPDATED "200604270000Z"        --  27 April 2006
+       ORGANIZATION "Cyber Solutions Inc. NetMan Working Group"
+       CONTACT-INFO
+      "                      Glenn Mansfield Keeni
+                     Postal: Cyber Solutions Inc.
+                             6-6-3, Minami Yoshinari
+                             Aoba-ku, Sendai, Japan 989-3204.
+                        Tel: +81-22-303-4012
+                        Fax: +81-22-303-4015
+                     E-mail: glenn@cysols.com
+
+          Support Group E-mail: mibsupport@cysols.com"
+          DESCRIPTION
+                  "The MIB for servicing Time-Based aggregate
+                    objects.
+
+                    Copyright (C) The Internet Society (2006).  This
+                    version of this MIB module is part of RFC 4498;
+                    see the RFC itself for full legal notices.
+                  "
+          REVISION    "200604270000Z"      -- 27th April, 2006
+          DESCRIPTION "Initial version, published as RFC 4498."
+               ::= { experimental 124 }
+
+   TAggrMOErrorStatus ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model the error status of the
+        sampled MO instance.  The error status for a sampled MO
+        instance is given in terms of two elements:
+          o The moIndex, which indicates the sample number of the MO
+            instance (starting at 1) in the value of the time-
+            aggregated MO instance.
+          o The moError, which indicates the error that was
+            encountered in sampling that MO instance.
+        The syntax in ASN.1 Notation will be
+        ErrorStatus :: = SEQUENCE {
+           moIndex  Integer32,
+           moError  SnmpPduErrorStatus
+        }
+        TAggrMOErrorStatus ::= SEQUENCE OF {
+           ErrorStatus
+        }
+        Note1: The command responder will supply values for all
+               the samples of the MO instance.  If an error is
+               encountered for a sample, then the corresponding
+               value will have an ASN.1 value NULL, and an error
+               will be flagged in the corresponding
+               TAggrMOErrorStatus object.
+               Only MOs for which errors have been encountered will
+               the corresponding moIndex and moError values be set.
+        Note2: The error code for the component MO instances will be
+               in accordance with the SnmpPduErrorStatus TC defined
+               in the DISMAN-SCHEDULE-MIB[RFC3231].
+       "
+     SYNTAX      Opaque (SIZE (0..1024))
+
+   TimeAggrMOValue ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model the time-aggregated MOs.  It
+
+        will be a sequence of values.  The syntax in ASN.1 Notation
+        will be
+        MOSampleValue :: = SEQUENCE {
+             value ObjectSyntax
+        }
+        TimeAggrMOValue ::= SEQUENCE OF {
+             MOSampleValue
+        }
+        where the first MOSampleValue, if any, will always be the
+        timestamp of the first sample in the aggregated object.  The
+        subsequent values are the values of the MO instance sampled
+        at the specified intervals for the specified number of times.
+        Note: The command generator will need to know the
+              constituent MO instance and the sampling interval to
+              correctly interpret TimeAggrMOValue.
+       "
+     SYNTAX      Opaque (SIZE (0..1024))
+
+   CompressedTimeAggrMOValue ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model the compressed
+        TAgMOs."
+     SYNTAX      Opaque (SIZE (0..1024))
+
+--
+-- The Time-Based aggregation control table
+--
+   tAggrCtlTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF TAggrCtlEntry
+        MAX-ACCESS  not-accessible
+        STATUS current
+        DESCRIPTION
+           "The Time-Based aggregation control table.  It controls
+            the aggregation of the samples of MO instances.  There
+            will be a row for each TAgMO.
+           "
+        ::= {tAggrMIB 1}
+
+    tAggrCtlEntry OBJECT-TYPE
+        SYNTAX  TAggrCtlEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+          "A row of the control table that defines one Time-Based
+           aggregate MO (TAgMO)."
+        INDEX {tAggrCtlEntryID }
+        ::= {tAggrCtlTable 1 }
+
+    TAggrCtlEntry ::= SEQUENCE {
+       tAggrCtlEntryID
+                     SnmpAdminString,
+       tAggrCtlMOInstance
+                     OBJECT IDENTIFIER,
+       tAggrCtlAgMODescr
+                     SnmpAdminString,
+       tAggrCtlInterval
+                     Integer32,
+       tAggrCtlSamples
+                     Integer32,
+       tAggrCtlCompressionAlgorithm
+                     INTEGER,
+       tAggrCtlEntryOwner
+                     OwnerString,
+       tAggrCtlEntryStorageType
+                     StorageType,
+       tAggrCtlEntryStatus
+                     RowStatus
+    }
+
+   tAggrCtlEntryID OBJECT-TYPE
+        SYNTAX SnmpAdminString (SIZE(1..32))
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+          "A locally unique, administratively assigned name
+            for this aggregated MO.  It is used as an index to
+            uniquely identify this row in the table."
+        ::= { tAggrCtlEntry 1 }
+
+   tAggrCtlMOInstance OBJECT-TYPE
+        SYNTAX OBJECT IDENTIFIER
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The sampled values of this MO instance will be
+            aggregated by the TAgMO.
+            "
+        ::= { tAggrCtlEntry 2 }
+
+   tAggrCtlAgMODescr OBJECT-TYPE
+        SYNTAX SnmpAdminString (SIZE(0..64))
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "A textual description of the aggregate object."
+        ::= {tAggrCtlEntry 3}
+
+   tAggrCtlInterval OBJECT-TYPE
+        SYNTAX Integer32
+        UNITS  "micro seconds"
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The interval, in microseconds, at which the MO instance
+            pointed at by tAggrInstance will be sampled for
+            Time-Based aggregation.
+          "
+        ::= {tAggrCtlEntry 4}
+
+   tAggrCtlSamples OBJECT-TYPE
+        SYNTAX Integer32
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The number of times at which the MO instance referred
+            to by tAggrInstance will be sampled for Time-Based
+            aggregation."
+        ::= {tAggrCtlEntry 5}
+
+   -- only one compression algorithm is defined as of now.
+   tAggrCtlCompressionAlgorithm OBJECT-TYPE
+        SYNTAX INTEGER {
+               none      (1),
+               deflate   (2)
+        }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The compression algorithm that will be used by
+            the agent to compress the value of the TAgMO.
+            The deflate algorithm and corresponding data format
+            specification is described in RFC 1951.  It is
+            compatible with the widely used gzip utility.
+          "
+        REFERENCE
+          "RFC1951 : DEFLATE Compressed Data Format Specification
+           version 1.3
+          "
+        DEFVAL { none }
+        ::= {tAggrCtlEntry 6}
+
+   tAggrCtlEntryOwner OBJECT-TYPE
+        SYNTAX OwnerString
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "A textual description of the entity that created
+            this entry.
+          "
+        ::= {tAggrCtlEntry 7}
+
+   tAggrCtlEntryStorageType OBJECT-TYPE
+        SYNTAX StorageType
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "This object defines whether the parameters defined in
+            this row are kept in volatile storage and lost upon
+            reboot or backed up by non-volatile (permanent)
+            storage.
+            Conceptual rows having the value 'permanent' need not
+            allow write-access to any columnar objects in the row.
+           "
+        ::= {tAggrCtlEntry 8}
+
+   tAggrCtlEntryStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions.
+            Objects in a row can be modified only when the value of
+            this object in the corresponding conceptual row is not
+            'active'.
+            Thus, to modify one or more of the objects in this
+            conceptual row,
+              a. change the row status to 'notInService',
+              b. change the values of the row, and
+              c. change the row status to 'active'.
+            The tAggrCtlEntryStatus may be changed to 'active' iff
+            all the MOs in the conceptual row have been assigned
+            valid values.
+           "
+        ::= {tAggrCtlEntry 9}
+
+   --
+   -- tAggrDataTable: The data table.
+   --
+   tAggrDataTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF TAggrDataEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+           "This is the data table.  Each row of this table contains
+            information about a TAgMO indexed by tAggrCtlEntryID.
+            tAggrCtlEntryID is the key to the table.  It is used to
+            identify instances of the TAgMO that are present in the
+            table.
+          "
+        ::= {tAggrMIB 2}
+
+   tAggrDataEntry OBJECT-TYPE
+        SYNTAX  TAggrDataEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+          "Entry containing information pertaining
+            to a TAgMO."
+        INDEX {tAggrCtlEntryID}
+        ::= {tAggrDataTable 1 }
+
+   TAggrDataEntry ::= SEQUENCE {
+      tAggrDataRecord
+                 TimeAggrMOValue,
+      tAggrDataRecordCompressed
+                 CompressedTimeAggrMOValue,
+      tAggrDataErrorRecord
+                 TAggrMOErrorStatus
+      }
+
+   tAggrDataRecord OBJECT-TYPE
+        SYNTAX TimeAggrMOValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+          "The snapshot value of the TAgMO."
+        ::= { tAggrDataEntry 1}
+
+   tAggrDataRecordCompressed OBJECT-TYPE
+        SYNTAX CompressedTimeAggrMOValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+          "The compressed value of the TAgMO.
+           The compression algorithm will depend on the
+           tAggrCtlCompressionAlgorithm given in the corresponding
+           tAggrCtlEntry.  If the value of the corresponding
+           tAggrCtlCompressionAlgorithm is (1) 'none', then the
+
+           value of all instances of this object will be a string
+           of zero length.
+           Note that the access privileges to this object will be
+           governed by the access privileges of the corresponding MO
+           instance.  Thus, an entity attempting to access an
+           instance of this MO MUST have access rights to the
+           instance object pointed at by tAggrCtlMOInstance and this
+           MO instance.
+          "
+        ::= { tAggrDataEntry 2}
+
+   tAggrDataErrorRecord OBJECT-TYPE
+        SYNTAX TAggrMOErrorStatus
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+           "The error status corresponding to the MO instance
+            samples aggregated in tAggrDataRecord (and
+            tAggrDataRecordCompressed)."
+        ::= { tAggrDataEntry 3}
+
+    -- Conformance information
+   tAggrConformance OBJECT IDENTIFIER ::= { tAggrMIB 3 }
+   tAggrGroups      OBJECT IDENTIFIER ::= { tAggrConformance 1 }
+   tAggrCompliances OBJECT IDENTIFIER ::= { tAggrConformance 2 }
+
+    -- Compliance statements
+   tAggrMibCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for SNMP entities
+                 that implement the TIME-AGGREGATE-MIB."
+        MODULE  -- this module
+            MANDATORY-GROUPS { tAggrMibBasicGroup }
+        ::= { tAggrCompliances 1 }
+
+    -- Units of conformance
+   tAggrMibBasicGroup    OBJECT-GROUP
+        OBJECTS {
+                   tAggrCtlMOInstance,
+                   tAggrCtlAgMODescr,
+                   tAggrCtlInterval,
+                   tAggrCtlSamples,
+                   tAggrCtlCompressionAlgorithm,
+                   tAggrCtlEntryOwner,
+                   tAggrCtlEntryStorageType,
+                   tAggrCtlEntryStatus,
+                   tAggrDataRecord,
+                   tAggrDataRecordCompressed,
+                   tAggrDataErrorRecord
+       }
+        STATUS  current
+        DESCRIPTION
+                 "A collection of objects for Time-Based aggregation
+                  of MOs."
+        ::= { tAggrGroups 1 }
+   END
diff --git a/snmp_builder/mibs/TN3270E-MIB.mib b/snmp_builder/mibs/TN3270E-MIB.mib
new file mode 100644
index 0000000..b620eee
--- /dev/null
+++ b/snmp_builder/mibs/TN3270E-MIB.mib
@@ -0,0 +1,1953 @@
+TN3270E-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks,
+    IpAddress, Counter32, Gauge32, Counter64
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, TestAndIncr, DateAndTime,
+    TimeStamp
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+    snanauMIB
+        FROM SNA-NAU-MIB
+    Utf8String
+        FROM SYSAPPL-MIB
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    IANATn3270eAddrType, IANATn3270eAddress,
+    IANATn3270eClientType, IANATn3270Functions,
+    IANATn3270ResourceType, IANATn3270DeviceType,
+    IANATn3270eLogData
+        FROM IANATn3270eTC-MIB;
+
+  tn3270eMIB MODULE-IDENTITY
+      LAST-UPDATED "9807270000Z" -- July 27, 1998
+      ORGANIZATION "TN3270E Working Group"
+      CONTACT-INFO
+          "Kenneth White (kennethw@vnet.ibm.com)
+           IBM Corp. - Dept. BRQA/Bldg. 501/G114
+           P.O. Box 12195
+           3039 Cornwallis
+           RTP, NC 27709-2195
+           USA
+
+           Robert Moore (remoore@us.ibm.com)
+           IBM Corp. - Dept. BRQA/Bldg. 501/G114
+           P.O. Box 12195
+           3039 Cornwallis
+           RTP, NC 27709-2195
+           USA
+           +1-919-254-4436"
+      DESCRIPTION
+          "This module defines a portion of the management
+
+          information base (MIB) for managing TN3270E servers."
+      REVISION  "9807270000Z" -- July 27, 1998
+      DESCRIPTION
+          "RFC nnnn (Proposed Standard)" -- RFC Editor to fill in
+      ::= { snanauMIB 8 }
+
+-- Textual Conventions
+
+SnaResourceName ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The textual convention for defining an SNA resource
+         name. A fully qualified SNA resource name, consisting
+         of a 1 to 8 character network identifier (NetId), a
+         period ('.'), and a 1 to 8 character resource name
+         (ResName).
+
+         The NetId and ResName are constructed from the
+         uppercase letters 'A' - 'Z' and the numerics '0' - '9',
+         all encoded in ASCII, with the restriction that the
+         first character of each must be a letter.  Blanks are
+         not allowed.
+
+         Earlier versions of SNA permitted three additional
+         characters in NetIds and ResNames:  '#', '@', and '$'.
+         While this use of these characters has been retired,
+         a Management Station should still accept them for
+         backward compatibility.
+
+         Note: This Textual Convention is not subject to
+         internationalization, and does not use the character
+         encodings used by the Utf8String Textual Convention."
+    SYNTAX     OCTET STRING (SIZE(0..17))
+
+Tn3270eTraceData ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "An octet string representing trace data from the
+        Telnet half of a TN3270E session, from the SNA half,
+        or from both.  The octet string contains a sequence
+        of trace elements, with the trace elements in the
+        string ordered from earliest to latest.
+
+        Each trace element has the following form:
+
+                +---+---+----+----------------------+
+                !length !type!data                  !
+                +---+---+----+----------------------+
+
+          where:
+
+          length = two-octet length of the data portion of the
+                   trace element, not including the length and
+                   type octets
+
+          type   = one-octet code point characterizing the data;
+                   defined values are:
+
+                   X'01' telnet PDU from the server to the client
+                   X'02' telnet PDU from the client to the server
+                   X'03' SNA data from the server to the SNA host
+                   X'04' SNA data from the SNA host to the server
+
+          data   = initial part of a PDU.
+
+        It is implementation-dependent where the 'initial part of
+        a PDU' starts.  For SNA data, however, the starting point
+        SHOULD be the first byte of the TH.  For IP data the
+        starting point SHOULD be the first byte of the IP header.
+
+        It is left to implementations to determine how much of
+        each PDU to return in a trace element.
+
+        The zero-length string indicates that no trace
+        data is available."
+    SYNTAX OCTET STRING (SIZE (0 | 3..4096))
+
+-- Top-level structure of the MIB
+
+tn3270eNotifications  OBJECT IDENTIFIER ::= { tn3270eMIB 0 }
+tn3270eObjects        OBJECT IDENTIFIER ::= { tn3270eMIB 1 }
+tn3270eConformance    OBJECT IDENTIFIER ::= { tn3270eMIB 3 }
+
+-- MIB Objects
+
+tn3270eSrvrConfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eSrvrConfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines the configuration elements for
+        TN3270E servers.  The number of entries in this table
+        is expected to vary depending on the location of the
+        table.  A particular TN3270E server is expected to
+        have a single entry.  Modeling of the configuration
+        elements as a table allows multiple TN3270E
+        servers to be serviced by the same SNMP agent.
+
+        An implementation SHOULD NOT retain an SNMP-created
+        entry in this table across re-IPLs (Initial Program
+        Loads) of the corresponding TN3270E server."
+    ::= { tn3270eObjects 1 }
+
+tn3270eSrvrConfEntry OBJECT-TYPE
+    SYNTAX      Tn3270eSrvrConfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of the configuration elements for a single
+        TN3270E server."
+    INDEX       { tn3270eSrvrConfIndex }
+    ::= { tn3270eSrvrConfTable 1 }
+
+Tn3270eSrvrConfEntry ::= SEQUENCE {
+    tn3270eSrvrConfIndex             Unsigned32,
+    tn3270eSrvrConfInactivityTimeout Unsigned32,
+    tn3270eSrvrConfConnectivityChk   INTEGER,
+    tn3270eSrvrConfTmNopInactTime    Unsigned32,
+    tn3270eSrvrConfTmNopInterval     Unsigned32,
+    tn3270eSrvrFunctionsSupported    IANATn3270Functions,
+    tn3270eSrvrConfAdminStatus       INTEGER,
+    tn3270eSrvrConfOperStatus        INTEGER,
+    tn3270eSrvrConfSessionTermState  INTEGER,
+    tn3270eSrvrConfSrvrType          INTEGER,
+    tn3270eSrvrConfContact           SnmpAdminString,
+    tn3270eSrvrConfRowStatus         RowStatus,
+    tn3270eSrvrConfLastActTime       DateAndTime,
+    tn3270eSrvrConfTmTimeout         Unsigned32
+  }
+
+tn3270eSrvrConfIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Identifier for a single TN3270E server.
+
+       tn3270eSrvrConfIndex values need not be
+       contiguous."
+    ::= { tn3270eSrvrConfEntry 1 }
+
+tn3270eSrvrConfInactivityTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..99999999)
+    UNITS "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The inactivity time-out specified in seconds.  When a
+        connection has been inactive for the number of seconds
+        specified by this object it is closed.  Only user traffic
+        is considered when determining whether there has been
+        activity on a connection.
+
+        The default value 0 means that no inactivity time-out is
+        in effect."
+    DEFVAL { 0 }
+    ::= { tn3270eSrvrConfEntry 2 }
+
+tn3270eSrvrConfConnectivityChk OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          timingMark(1),
+                          nop(2),
+                          noCheck(3)
+                        }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This object enables TIMING-MARK processing, NOP
+        processing, or neither for a TN3270E server."
+    DEFVAL { noCheck }
+    ::= { tn3270eSrvrConfEntry 3 }
+
+tn3270eSrvrConfTmNopInactTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..86400) -- 1 second to 24 hours
+    UNITS "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The amount of time a connection must have had no
+       traffic on it in order for a TIMING-MARK or NOP request
+       to be sent on the connection.  This value applies only
+       when connections are being examined for recent activity
+       on a scan interval controlled by the value of the
+       tn3270eSrvrConfTmNopInterval object."
+    DEFVAL { 600 }   -- 10 minutes
+    ::= { tn3270eSrvrConfEntry 4 }
+
+tn3270eSrvrConfTmNopInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..86400) -- 1 second to 24 hours
+    UNITS "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The scan interval to be used by a TN3270E server when
+       it examines its Telnet connections for recent activity.
+       The server scans its Telnet connections on the interval
+       provided by this object, looking for ones that have been
+       idle for more than the value provided by the
+       tn3270eSrvrConfTmNopInactTime object.  A TIMING-MARK or
+       NOP request is sent for each connection that has
+       exhibited no activity for this period of time."
+    DEFVAL { 120 }   -- 2 minutes
+    ::= { tn3270eSrvrConfEntry 5 }
+
+tn3270eSrvrFunctionsSupported OBJECT-TYPE
+    SYNTAX    IANATn3270Functions
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This object indicates the functions supported by a
+        TN3270E server."
+    DEFVAL { { scsCtlCodes, dataStreamCtl,
+               responses, bindImage, sysreq } }
+    ::= { tn3270eSrvrConfEntry 6 }
+
+tn3270eSrvrConfAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                      up(1),
+                      down(2),
+                      stopImmediate(3)
+                    }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The desired state of the TN3270E server represented
+         by this entry in the table:
+
+         up(1)            - Activate this TN3270E server.
+         down(2)          - Informs the associated TN3270E
+                            server to gracefully terminate
+                            its processing.
+         stopImmediate(3) - Informs the associated TN3270E
+                            server to terminate itself
+                            immediately.
+
+         When a managed system creates an entry in this table,
+         tn3270eSrvrConfAdminStatus and tn3270eSrvrConfOperStatus
+         are initialized as up(1) by default.
+
+         The exact behavior of a server in response to a down(2)
+         or stopImmediate(3) command is left implementation-
+
+         dependent.  A TN3270E server that is capable of it
+         SHOULD close all of its TN3270 and TN3270E sessions
+         during a graceful termination.
+
+         Often the function enabled via stopImmediate(3) is used
+         as a last resort by a system administrator, to attempt
+         to either bring down a hung TN3270E server or free up
+         its resources immediately to aid in general system
+         availability, or to shut down a TN3270E server that is
+         not recognizing a down(2) request.
+
+         A TN3270E server that does not distinguish between
+         down(2) or stopImmediate(3) transitions should not
+         support stopImmediate(3)."
+    DEFVAL { up }
+    ::= { tn3270eSrvrConfEntry 7 }
+
+tn3270eSrvrConfOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                     up(1),
+                     down(2),
+                     busy(3),
+                     shuttingDown(4)
+                    }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The current operational state of a TN3270E server.
+       The following values are defined:
+
+        up(1)            - the server is active and accepting
+                           new client connections
+        down(2)          - the server is not active
+        busy(3)          - the server is active, but is not
+                           accepting new client connections
+                           because it lacks the resources to
+                           do so
+        shuttingDown(4)  - the server is active, but is not
+                           accepting new client connections
+                           because it is in the process of
+                           performing a graceful shutdown."
+    DEFVAL { up }
+    ::= { tn3270eSrvrConfEntry 8 }
+
+tn3270eSrvrConfSessionTermState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                      terminate(1),
+                      luSessionPend(2),
+                      queueSession(3)
+                    }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "This object determines what a TN3270E server
+        should do when a TN3270 Session terminates:
+       terminate(1)     => Terminate the TCP connection.
+       luSessionPend(2) => Do not drop the TCP connection
+                           associated with a client when its
+                           TN3270 session ends.  Processing
+                           should redrive session initialization
+                           as if the client were first connecting.
+       queueSession(3)  => This value relates to the Close
+                           Destination PASS (CLSDST PASS) operation
+                           in VTAM.  An example provides the
+                           easiest explanation.  Suppose a TN3270E
+                           client is in session with APPL1, and
+                           APPL1 does a CLSDST PASS of the client's
+                           session to APPL2.  queueSession(3)
+                           specifies that the TN3270E server must
+                           keep the TCP connection with the client
+                           active after it receives the UNBIND from
+                           APPL1, waiting for the BIND from APPL2."
+    DEFVAL { terminate }
+    ::= { tn3270eSrvrConfEntry 9 }
+
+tn3270eSrvrConfSrvrType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          host(1),
+                          gateway(2)
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the type of TN3270E server.
+        The existence of MIB tables and objects that will be
+        defined by follow-on MIBs may be predicated on whether
+        the TN3270E server can be local to the same host as a
+        target application (host(1)) or will always be remote
+        (gateway(2)).
+
+        A host TN3270E server refers to an implementation where
+        the TN3270E server is collocated with the Systems
+        Network Architecture (SNA) System Services Control Point
+        (SSCP) for the dependent Secondary Logical Units (SLUs)
+        that the server makes available to its clients for
+        connecting into an SNA network.
+
+        A gateway TN3270E server resides on an SNA node other
+        than an SSCP, either an SNA type 2.0 node or an APPN node
+        acting in the role of a Dependent LU Requester (DLUR).
+
+        Host and gateway TN3270E server implementations typically
+        differ greatly as to their internal implementation and
+        system definition (SYSDEF) requirements."
+    ::= { tn3270eSrvrConfEntry 10 }
+
+tn3270eSrvrConfContact OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object provides a scratch pad for a TN3270E
+        server administrator for storing information for
+        later retrieval."
+    DEFVAL { ''H }   -- the empty string
+    ::= { tn3270eSrvrConfEntry 11 }
+
+tn3270eSrvrConfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the tn3270eSrvrConfTable.  Entries may also be
+        created and deleted as a result of implementation-
+        dependent operations.
+
+        With the exception of tn3270eSrvrConfSrvrType, which
+        an implementation can easily fill in for itself, all
+        the columnar objects in this table have DEFVALs
+        associated with them.  Consequently, a Management
+        Station can create a conceptual row via a SET
+        operation that specifies a value only for this object.
+
+        When a tn3270eSrvrConfEntry is deleted (by setting
+        this object to destroy(6)), this has the side-effect
+        of removing all the associated entries (i.e., those
+        having the same tn3270eSrvrConfIndex) from the
+        tn3270eSrvrPortTable, the tn3270eSrvrStatsTable, the
+        tn3270eClientGroupTable, the tn3270eResPoolTable,
+        the tn3270eSnaMapTable, the tn3270eClientResMapTable,
+        and the tn3270eResMapTable.  All entries in the
+        tn3270eTcpConnTable that belong to a TN3270E server
+        that has been deleted MUST also be removed.
+
+        In other words, a tn3270eSrvrConfEntry must exist for
+        a TN3270E server in order for it to have entries in
+        any of the other tables defined by this MIB."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { tn3270eSrvrConfEntry 12 }
+
+tn3270eSrvrConfLastActTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object reports the DateAndTime when a TN3270E
+        server was most recently activated.
+
+        The special value of all '00'Hs indicates that the
+        server has never been active, i.e., that the value of
+        tn3270eSrvrOperStatus has never been anything other
+        than down(2)."
+    DEFVAL { '0000000000000000'H }
+    ::= { tn3270eSrvrConfEntry 13 }
+
+tn3270eSrvrConfTmTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..600) -- 1 second to 10 minutes
+    UNITS "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The TIMING-MARK time-out, specified in seconds."
+    DEFVAL { 5 }   -- 5 seconds
+    ::= { tn3270eSrvrConfEntry 14 }
+
+tn3270eSrvrPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eSrvrPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines the TCP ports associated with
+        TN3270E servers.  No entry in this table shall exist
+        without a corresponding (same tn3270eSrvrConfIndex)
+        entry in the tn3270eSrvrConfTable existing.
+
+        An implementation SHOULD NOT retain SNMP-created
+        entries in this table across re-IPLs (Initial Program
+        Loads) of the corresponding TN3270E server."
+    ::= { tn3270eObjects 2 }
+
+tn3270eSrvrPortEntry OBJECT-TYPE
+    SYNTAX      Tn3270eSrvrPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of a single TCP port assignment to a
+         TN3270E server.  Assignment of a port on a local
+         address basis is enabled though use of
+         tn3270eSrvrPortAddrType and tn3270eSrvrPortAddress.
+
+         A TCP port assignment that is not restricted to
+         a local address SHALL specify a tn3270eSrvrPortAddrType
+         of unknown(0), and SHALL use a zero-length octet string
+         for the tn3270eSrvrPortAddress."
+    INDEX       {
+                  tn3270eSrvrConfIndex,
+                  tn3270eSrvrPort,
+                  tn3270eSrvrPortAddrType,
+                  tn3270eSrvrPortAddress
+                }
+    ::= { tn3270eSrvrPortTable 1 }
+
+Tn3270eSrvrPortEntry ::= SEQUENCE {
+    tn3270eSrvrPort                 Unsigned32,
+    tn3270eSrvrPortAddrType         IANATn3270eAddrType,
+    tn3270eSrvrPortAddress          IANATn3270eAddress,
+    tn3270eSrvrPortRowStatus        RowStatus
+  }
+
+tn3270eSrvrPort OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Indicates a port assigned to a server."
+    ::= { tn3270eSrvrPortEntry 1 }
+
+tn3270eSrvrPortAddrType OBJECT-TYPE
+    SYNTAX      IANATn3270eAddrType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of an address local to the host on
+        which the TN3270E server resides that is represented
+        in tn3270eSrvrPortAddress.  A value of unknown(0)
+        SHALL be used for this object when the port is not
+        to be restricted to a local address."
+    ::= { tn3270eSrvrPortEntry 2 }
+
+tn3270eSrvrPortAddress OBJECT-TYPE
+    SYNTAX      IANATn3270eAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A local address on the host that a TN3270E server
+         resides on that is associated with a TCP port that
+         is to be used or is in use by a TN3270E server.
+         tn3270eClientGroupAddrType indicates the
+         address type (IPv4 or IPv6, for example).
+
+         A zero-length octet string SHALL be used as the
+         value of this object when a local address isn't
+         being specified."
+    ::= { tn3270eSrvrPortEntry 3 }
+
+tn3270eSrvrPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the tn3270eSrvrPortTable.  Entries may also be
+        created and deleted as a result of implementation-
+        dependent operations.
+
+        Since this is the only accessible object in this table,
+        a Management Station can create a conceptual row via a SET
+        operation that specifies a value only for this object.
+
+        An entry in this table is deleted by setting this object
+        to destroy(6).  Deletion of a tn3270eSrvrPortEntry has
+        no effect on any other table entry defined by this MIB."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { tn3270eSrvrPortEntry 4 }
+
+tn3270eSrvrStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eSrvrStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines a set of statistics concerning
+        TN3270E server performance.
+
+        No entry in this table shall exist without
+        a corresponding (same tn3270eSrvrConfIndex) entry in
+
+        the tn3270eSrvrConfTable existing."
+    ::= { tn3270eObjects 3 }
+
+tn3270eSrvrStatsEntry OBJECT-TYPE
+    SYNTAX      Tn3270eSrvrStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A collection of statistical and maximum usage objects
+        for a single TN3270 server.  An entry can represent the total
+        activity of the server, or it can represent the activity
+        occurring at the server on either a port or a
+        port-and-local-address basis.
+
+        Collection of the statistics represented by the objects
+        in this table is not mandatory.   An implementation
+        of this table MUST use only one of the three levels of
+        refinement that this table supports for the entries
+        associated with each TN3270E server.
+
+        The indexing for a row that represents total server
+        statistics is as follows:
+
+             tn3270eSrvrConfIndex      value identifying the server
+             tn3270eSrvrPort           0
+             tn3270eSrvrPortAddrType   unknown(0)
+             tn3270eSrvrPortAddress    zero-length octet string.
+
+        On a port basis:
+
+             tn3270eSrvrConfIndex      value identifying the server
+             tn3270eSrvrPort           > 0
+             tn3270eSrvrPortAddrType   unknown(0)
+             tn3270eSrvrPortAddress    zero-length octet string.
+
+        On a port-and-local-address basis:
+
+             tn3270eSrvrConfIndex      value identifying the server
+             tn3270eSrvrPort           > 0
+             tn3270eSrvrPortAddrType   valid value other than unknown(0)
+             tn3270eSrvrPortAddress    non-zero-length octet string.
+       "
+    INDEX       {
+                  tn3270eSrvrConfIndex,
+                  tn3270eSrvrPort,
+                  tn3270eSrvrPortAddrType,
+                  tn3270eSrvrPortAddress
+
+                }
+    ::= { tn3270eSrvrStatsTable 1 }
+
+Tn3270eSrvrStatsEntry ::= SEQUENCE {
+    tn3270eSrvrStatsUpTime          TimeStamp,
+    tn3270eSrvrStatsMaxTerms        Unsigned32,
+    tn3270eSrvrStatsInUseTerms      Gauge32,
+    tn3270eSrvrStatsSpareTerms      Gauge32,
+    tn3270eSrvrStatsMaxPtrs         Unsigned32,
+    tn3270eSrvrStatsInUsePtrs       Gauge32,
+    tn3270eSrvrStatsSparePtrs       Gauge32,
+    tn3270eSrvrStatsInConnects      Counter32,
+    tn3270eSrvrStatsConnResrceRejs  Counter32,
+    tn3270eSrvrStatsDisconnects     Counter32,
+    tn3270eSrvrStatsHCInOctets      Counter64,
+    tn3270eSrvrStatsInOctets        Counter32,
+    tn3270eSrvrStatsHCOutOctets     Counter64,
+    tn3270eSrvrStatsOutOctets       Counter32,
+    tn3270eSrvrStatsConnErrorRejs   Counter32
+  }
+
+tn3270eSrvrStatsUpTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of the sysUpTime object the last time
+        the TN3270E server was re-initialized.
+
+        Server re-initialization is the only discontinuity
+        event for the counters in this table.  Even if table
+        entries are on a port or port-and-local-address
+        basis, port deactivation and reactivation do not
+        result in counter discontinuities."
+    ::= { tn3270eSrvrStatsEntry 2 }
+
+tn3270eSrvrStatsMaxTerms OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "LUs"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the maximum number of terminal LUs available
+       for use at a TN3270E server for the granularity of this
+       conceptual row (server-wide, port, or
+       port-and-local-address)."
+    ::= { tn3270eSrvrStatsEntry 3 }
+
+tn3270eSrvrStatsInUseTerms OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "LUs"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of terminal LUs currently in
+       use at a TN3270E server for the granularity of this
+       conceptual row (server-wide, port, or
+       port-and-local-address)."
+    ::= { tn3270eSrvrStatsEntry 4 }
+
+tn3270eSrvrStatsSpareTerms OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "LUs"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of free terminal LUs at a TN3270E
+       server for the granularity of this conceptual row
+       (server-wide, port, or port-and-local-address).
+
+       It is possible that the difference between
+       tn3270eSrvrStatsMaxTerms and tn3270eSrvrStatsInUseTerms
+       in a conceptual row does not equal the value of
+       tn3270eSrvrStatsSpareTerms in that row:  an LU may
+       exist but not be usable by a client connection.
+
+       Alternatively, the administrative ceiling represented
+       by tn3270eSrvrStatsMaxTerms may have been lowered to
+       a point where it is less than the current value of
+       tn3270eSrvrStatsInUseTerms.  In this case
+       tn3270eSrvrStatsSpareTerms returns the value 0."
+    ::= { tn3270eSrvrStatsEntry 5 }
+
+tn3270eSrvrStatsMaxPtrs OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Printer Resources"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the maximum number of printer resources
+       available for use by a TN3270E server for the
+       granularity of this conceptual row (server-wide,
+       port, or port-and-local-address)."
+    ::= { tn3270eSrvrStatsEntry 6 }
+
+tn3270eSrvrStatsInUsePtrs OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "Printer Resources"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of printer resources
+       currently in use by a TN3270E server for the
+       granularity of this conceptual row (server-wide,
+       port, or port-and-local-address)."
+    ::= { tn3270eSrvrStatsEntry 7 }
+
+tn3270eSrvrStatsSparePtrs OBJECT-TYPE
+    SYNTAX      Gauge32
+    UNITS       "Spare Printer Resources"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of free printer resources at
+       a TN3270E server for the granularity of this conceptual
+       row (server-wide, port, or port-and-local-address).
+
+       It is possible that the difference between
+       tn3270eSrvrStatsMaxPtrs and tn3270eSrvrStatsInUsePtrs
+       in a conceptual row does not equal the value of
+       tn3270eSrvrStatsSparePtrs in that row:  a printer
+       resource may exist but not be usable by a client
+       connection.
+
+       Alternatively, the administrative ceiling represented
+       by tn3270eSrvrStatsMaxPtrs may have been lowered to
+       a point where it is less than the current value of
+       tn3270eSrvrStatsInUsePtrs.  In this case
+       tn3270eSrvrStatsSparePtrs returns the value 0."
+    ::= { tn3270eSrvrStatsEntry 8 }
+
+tn3270eSrvrStatsInConnects OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "connections"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of client (TCP) connections
+       that succeeded at a TN3270E server for the
+       granularity of this conceptual row (server-wide,
+       port, or port-and-local-address).
+
+       The tn3270eSrvrStatsConnResrceRejs and
+
+       tn3270eSrvrStatsConnErrorRejs objects provide a count
+       of failed connection attempts.
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 9 }
+
+tn3270eSrvrStatsConnResrceRejs OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "connection attempts"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of (TCP) connections rejected
+       during connection setup at a TN3270E server for the
+       granularity of this conceptual row (server-wide,
+       port, or port-and-local-address) due to a lack of
+       resources at the server.  An example of when this
+       counter would be incremented is when no terminal
+       or printer resource is available to associate with a
+       client's TCP connection.
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 10 }
+
+tn3270eSrvrStatsDisconnects OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "disconnections"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of (TCP) connections that were
+       disconnected at a TN3270E server for the
+       granularity of this conceptual row (server-wide,
+       port, or port-and-local-address).
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 11 }
+
+tn3270eSrvrStatsHCInOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of octets received from TN3270
+       and TN3270E clients for the granularity of this
+       conceptual row (server-wide, port, or
+       port-and-local-address).
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 12 }
+
+tn3270eSrvrStatsInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Low-order 32 bits of tn3270eSrvrStatsHCInOctets for
+       this conceptual row.
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 13 }
+
+tn3270eSrvrStatsHCOutOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of octets sent to TN3270
+       and TN3270E clients for the granularity of this
+       conceptual row (server-wide, port, or
+       port-and-local-address).
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 14 }
+
+tn3270eSrvrStatsOutOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Low-order 32 bits of tn3270eSrvrStatsHCOutOctets for
+       this conceptual row.
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 15 }
+
+tn3270eSrvrStatsConnErrorRejs OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "connection attempts"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "Indicates the number of (TCP) connections rejected
+       during connection setup at a TN3270E server for the
+       granularity of this conceptual row (server-wide,
+       port, or port-and-local-address) due to an error
+       of some type.  An example of when this counter would
+       be incremented is when the client and the server
+       cannot agree on a common set of TN3270E functions for
+       the connection.
+
+       A Management Station can detect discontinuities in
+       this counter by monitoring the tn3270eSrvrStatsUpTime
+       object."
+    ::= { tn3270eSrvrStatsEntry 16 }
+
+tn3270eClientGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eClientGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines client address groupings for use
+        by a TN3270E server.
+
+        No entry in this table shall exist without
+        a corresponding (same tn3270eSrvrConfIndex) entry in
+        the tn3270eSrvrConfTable existing.
+
+        An implementation SHOULD NOT retain SNMP-created
+        entries in this table across re-IPLs (Initial Program
+        Loads) of the corresponding TN3270E server."
+    ::= { tn3270eObjects 4 }
+
+tn3270eClientGroupEntry OBJECT-TYPE
+    SYNTAX      Tn3270eClientGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of a single client address entry.  All
+        entries with the same first two indexes,
+        tn3270eSrvrConfIndex and tn3270eClientGroupName, are
+        considered to be in the same client group."
+    INDEX       { tn3270eSrvrConfIndex,
+                  tn3270eClientGroupName,
+                  tn3270eClientGroupAddrType,
+                  tn3270eClientGroupAddress }
+    ::= { tn3270eClientGroupTable 1 }
+
+Tn3270eClientGroupEntry ::= SEQUENCE {
+    tn3270eClientGroupName           Utf8String,
+    tn3270eClientGroupAddrType       IANATn3270eAddrType,
+    tn3270eClientGroupAddress        IANATn3270eAddress,
+    tn3270eClientGroupSubnetMask     IpAddress,
+    tn3270eClientGroupPfxLength      Unsigned32,
+    tn3270eClientGroupRowStatus      RowStatus
+}
+
+tn3270eClientGroupName OBJECT-TYPE
+    SYNTAX      Utf8String (SIZE(1..24))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a client group.  Note: client group
+        names are required to be unique only with respect
+        to a single TN3270E server."
+    ::= { tn3270eClientGroupEntry 1 }
+
+tn3270eClientGroupAddrType OBJECT-TYPE
+    SYNTAX      IANATn3270eAddrType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of the address represented in
+         tn3270eClientGroupAddress."
+    ::= { tn3270eClientGroupEntry 2 }
+
+tn3270eClientGroupAddress OBJECT-TYPE
+    SYNTAX      IANATn3270eAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The client address of a member of a client group.
+        The value of tn3270eClientGroupAddrType indicates
+        the address type (IPv4 or IPv6, for example)."
+    ::= { tn3270eClientGroupEntry 3 }
+
+tn3270eClientGroupSubnetMask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The corresponding subnet mask associated with
+         tn3270eClientGroupAddress.  A single IP address is
+         represented by having this object contain the value
+         of 255.255.255.255.
+
+         This object's value is meaningful only if
+         tn3270eClientGroupAddrType has a value of ipv4(1)."
+    DEFVAL { 'FFFFFFFF'H }
+    ::= { tn3270eClientGroupEntry 4 }
+
+tn3270eClientGroupPfxLength OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..128)
+    UNITS       "bits"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The corresponding IPv6 network prefix length.
+
+        This object's value is meaningful only if
+        tn3270eClientGroupAddrType  has a value of ipv6(2)."
+    DEFVAL { 0 }
+    ::= { tn3270eClientGroupEntry 5 }
+
+tn3270eClientGroupRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the tn3270eClientGroupTable.  Entries may also be
+        created and deleted as a result of implementation-
+        dependent operations.
+
+        An entry in this table is deleted by setting this object
+        to destroy(6).  When the number of entries in this table
+        for a given client group becomes 0, this has the side-
+        effect of removing any entries for the group in the
+        tn3270eClientResMapTable."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { tn3270eClientGroupEntry 6 }
+
+tn3270eResPoolTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eResPoolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines resource groupings; the term
+        'pool' is used as it is defined by RFC 2355.
+
+        No entry in this table shall exist without
+        a corresponding (same tn3270eSrvrConfIndex) entry in
+        the tn3270eSrvrConfTable existing.
+
+        An implementation SHOULD NOT retain SNMP-created
+        entries in this table across re-IPLs (Initial Program
+        Loads) of the corresponding TN3270E server."
+    ::= { tn3270eObjects 5 }
+
+tn3270eResPoolEntry OBJECT-TYPE
+    SYNTAX      Tn3270eResPoolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of a single resource pool member.  All entries
+        with the same first two indexes, tn3270eSrvrConfIndex and
+        tn3270eResPoolName, are considered to be in the same pool."
+    INDEX  { tn3270eSrvrConfIndex,
+             tn3270eResPoolName,
+             tn3270eResPoolElementName }
+    ::= { tn3270eResPoolTable 1 }
+
+Tn3270eResPoolEntry ::= SEQUENCE {
+    tn3270eResPoolName           Utf8String,
+    tn3270eResPoolElementName    SnaResourceName,
+    tn3270eResPoolElementType    IANATn3270ResourceType,
+    tn3270eResPoolRowStatus      RowStatus
+}
+
+tn3270eResPoolName OBJECT-TYPE
+    SYNTAX      Utf8String (SIZE(1..24))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a resource pool."
+    ::= { tn3270eResPoolEntry 1 }
+
+tn3270eResPoolElementName OBJECT-TYPE
+    SYNTAX      SnaResourceName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a member of a resource pool."
+    ::= { tn3270eResPoolEntry 2 }
+
+tn3270eResPoolElementType OBJECT-TYPE
+    SYNTAX      IANATn3270ResourceType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the entity in a resource pool."
+    ::= { tn3270eResPoolEntry 3 }
+
+tn3270eResPoolRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+        in the tn3270eResPoolTable.  Entries may also be
+        created and deleted as a result of implementation-
+        dependent operations.
+
+        An entry in this table is deleted by setting this object
+        to destroy(6).  When all entries in this table associated
+        with the same tn3270eResPoolElementName have been removed,
+        then any associated (tn3270eResPoolElementName matching
+        tn3270eClientResMapPoolName with same tn3270eSrvrConfIndex
+        values) entries in the tn3270eClientResMapTable SHALL
+        also be removed."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { tn3270eResPoolEntry 4 }
+
+tn3270eSnaMapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eSnaMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table provide a mapping from the name by which
+        a secondary LU is known in the SNA network to the
+        name by which it is known locally at the TN3270e
+        server.  This latter name serves as an index into
+        the tn3270eResPoolTable and the tn3270eResMapTable.
+
+        No entry in this table shall exist without
+        a corresponding (same tn3270eSrvrConfIndex) entry in
+        the tn3270eSrvrConfTable existing."
+    ::= { tn3270eObjects 6 }
+
+tn3270eSnaMapEntry OBJECT-TYPE
+    SYNTAX      Tn3270eSnaMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of a single mapping from an SSCP-supplied
+        SLU name to a local SLU name.
+
+        Note:  In certain pathological cases, it is possible
+        that an SSCP will send on an ACTLU for a local LU an
+        SLU name currently represented by an entry in this
+        table that associates it with a different local LU.
+        In these cases the association from the newer ACTLU
+        SHOULD be the one represented in this table."
+    INDEX  { tn3270eSrvrConfIndex,
+             tn3270eSnaMapSscpSuppliedName }
+    ::= { tn3270eSnaMapTable 1 }
+
+Tn3270eSnaMapEntry ::= SEQUENCE {
+    tn3270eSnaMapSscpSuppliedName     SnaResourceName,
+    tn3270eSnaMapLocalName            SnaResourceName,
+    tn3270eSnaMapPrimaryLuName        SnaResourceName
+}
+
+tn3270eSnaMapSscpSuppliedName OBJECT-TYPE
+    SYNTAX      SnaResourceName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of the secondary LU (SLU) as it is known in
+         the SNA network.  This name is sent by the SSCP on
+         the Activate Logical Unit (ACTLU) request."
+    ::= { tn3270eSnaMapEntry 1 }
+
+tn3270eSnaMapLocalName OBJECT-TYPE
+    SYNTAX      SnaResourceName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The local name of the secondary LU (SLU)."
+    ::= { tn3270eSnaMapEntry 2 }
+
+tn3270eSnaMapPrimaryLuName  OBJECT-TYPE
+    SYNTAX   SnaResourceName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "When there is a currently active LU-LU session for
+        this connection, this object returns the primary LU
+        (PLU) name from the BIND.  When there is no active
+        LU-LU session, or when the PLU name is unavailable
+        for some other reason, this object returns a
+        zero-length octet string."
+    ::= { tn3270eSnaMapEntry 3 }
+
+tn3270eClientResMapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eClientResMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines resource-pool to client-group
+        mappings.  Since both the resource pool name and client
+        group name are included in the index clause of this
+        table, multiple resource pools can be assigned to the
+        same client group.  This enables use of multiple
+        resource pools for use in client to resource mapping.
+        Assigning multiple client groups to the same resource
+        pool is also allowed, but is not the primary purpose
+        for how the indexing is structured.
+
+        Assignment of a resource pool to client group can be
+        restricted based on TCP port.  An index value of 0 for
+        tn3270eClientResMapClientPort disables restriction of
+        resource assignment based on client target port
+        selection.
+
+        No entry in this table shall exist without
+        a corresponding (same tn3270eSrvrConfIndex) entry in
+        the tn3270eSrvrConfTable existing.
+
+        An implementation SHOULD NOT retain SNMP-created
+        entries in this table across re-IPLs (Initial Program
+        Loads) of the corresponding TN3270E server."
+    ::= { tn3270eObjects 7 }
+
+tn3270eClientResMapEntry OBJECT-TYPE
+    SYNTAX      Tn3270eClientResMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of a single resource pool to client group
+
+        mapping."
+    INDEX  { tn3270eSrvrConfIndex,
+             tn3270eClientResMapPoolName,
+             tn3270eClientResMapClientGroupName,
+             tn3270eClientResMapClientPort }
+    ::= { tn3270eClientResMapTable 1 }
+
+Tn3270eClientResMapEntry ::= SEQUENCE {
+    tn3270eClientResMapPoolName           Utf8String,
+    tn3270eClientResMapClientGroupName    Utf8String,
+    tn3270eClientResMapClientPort         Unsigned32,
+    tn3270eClientResMapRowStatus          RowStatus
+}
+
+tn3270eClientResMapPoolName OBJECT-TYPE
+    SYNTAX      Utf8String (SIZE(1..24))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a resource pool."
+    ::= { tn3270eClientResMapEntry 1 }
+
+tn3270eClientResMapClientGroupName OBJECT-TYPE
+    SYNTAX      Utf8String (SIZE(1..24))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of the client group that is mapped to a
+         resource pool."
+    ::= { tn3270eClientResMapEntry 2 }
+
+tn3270eClientResMapClientPort OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A port number restricting the scope of a mapping
+        from a resource pool to a client group.  The
+        value 0 for this object indicates that the scope
+        of the mapping is not restricted."
+    ::= { tn3270eClientResMapEntry 3 }
+
+tn3270eClientResMapRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object allows entries to be created and deleted
+
+        in the tn3270eClientResMapTable.  Entries may also be
+        created and deleted as a result of implementation-
+        dependent operations.
+
+        An entry in this table is deleted by setting this object
+        to destroy(6).  Removing an entry from this table doesn't
+        affect any other table entry defined in this MIB."
+    REFERENCE
+        "RFC 1903, 'Textual Conventions for version 2 of the
+        Simple Network Management Protocol (SNMPv2).'"
+    ::= { tn3270eClientResMapEntry 4 }
+
+tn3270eResMapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Tn3270eResMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table defines the actual mapping of a resource
+        to a client address.
+
+        No entry in this table shall exist without
+        a corresponding (same tn3270eSrvrConfIndex) entry in
+        the tn3270eSrvrConfTable existing."
+    ::= { tn3270eObjects 8 }
+
+tn3270eResMapEntry OBJECT-TYPE
+    SYNTAX      Tn3270eResMapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Definition of the mapping of a Resource Element to
+         a client address."
+    INDEX  { tn3270eSrvrConfIndex,
+             tn3270eResMapElementName }
+    ::= { tn3270eResMapTable 1 }
+
+Tn3270eResMapEntry ::= SEQUENCE {
+    tn3270eResMapElementName       SnaResourceName,
+    tn3270eResMapAddrType          IANATn3270eAddrType,
+    tn3270eResMapAddress           IANATn3270eAddress,
+    tn3270eResMapPort              Unsigned32,
+    tn3270eResMapElementType       IANATn3270ResourceType,
+    tn3270eResMapSscpSuppliedName  SnaResourceName
+}
+
+tn3270eResMapElementName OBJECT-TYPE
+    SYNTAX      SnaResourceName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The name of a resource element.  This is the name by
+        which the server implementing this table knows the
+        resource.  It may be different from the name by which
+        the resource is known in the SNA network.  This latter
+        name is returned in the tn3270eResMapSscpSuppliedName
+        object."
+    ::= { tn3270eResMapEntry 1 }
+
+tn3270eResMapAddrType OBJECT-TYPE
+    SYNTAX      IANATn3270eAddrType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of the client address represented
+        in tn3270eResMapAddress."
+    ::= { tn3270eResMapEntry 2 }
+
+tn3270eResMapAddress OBJECT-TYPE
+    SYNTAX      IANATn3270eAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A client address."
+    ::= { tn3270eResMapEntry 3 }
+
+tn3270eResMapPort OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A client port."
+    ::= { tn3270eResMapEntry 4 }
+
+tn3270eResMapElementType OBJECT-TYPE
+    SYNTAX      IANATn3270ResourceType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of the associated resource element."
+    ::= { tn3270eResMapEntry 5 }
+
+tn3270eResMapSscpSuppliedName OBJECT-TYPE
+    SYNTAX      SnaResourceName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The name of the secondary LU (SLU) as it is known
+        in a SNA network.  This name is sent by the SSCP on
+        the Activate Logical Unit (ACTLU) request.  If this
+        name is not known, this object returns a zero-length
+        octet string."
+    ::= { tn3270eResMapEntry 6 }
+
+-- Define the set of objects to supplement the TCP Connection Table
+
+tn3270eTcpConnTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Tn3270eTcpConnEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "This table has an entry for each TN3270(E) client
+         connection that is currently active at a TN3270E server.
+         An implementation MAY retain entries for connections
+         that have been terminated, but which entries are
+         retained, how many entries are retained, and how long
+         they are retained is entirely implementation-dependent.
+
+         The indexing for this table is designed to support the
+         use of an SNMP GET-NEXT operation using only the remote
+         address type, remote address, and remote port, as a way
+         for a Management Station to retrieve the table entries
+         related to a particular TN3270(E) client."
+    ::= { tn3270eObjects 9 }
+
+tn3270eTcpConnEntry OBJECT-TYPE
+    SYNTAX Tn3270eTcpConnEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Provides information about a single TN3270/TN3270E
+        session.  Note: a tn3270eSrvrConfIndex is not needed
+        in this table, since the combination of remote and
+        local addresses and ports is sufficient to
+        guarantee uniqueness across the TN3270E servers
+        serviced by an SNMP agent.  Because of this indexing
+        structure, however, this table does not support
+        view-based access control policies that provide
+        access to table rows on a per-server basis."
+    INDEX { tn3270eTcpConnRemAddrType,
+            tn3270eTcpConnRemAddress,
+            tn3270eTcpConnRemPort,
+            tn3270eTcpConnLocalAddrType,
+            tn3270eTcpConnLocalAddress,
+            tn3270eTcpConnLocalPort
+
+          }
+    ::= { tn3270eTcpConnTable 1 }
+
+Tn3270eTcpConnEntry ::=
+    SEQUENCE
+    {
+    tn3270eTcpConnRemAddrType          IANATn3270eAddrType,
+    tn3270eTcpConnRemAddress           IANATn3270eAddress,
+    tn3270eTcpConnRemPort              Unsigned32,
+    tn3270eTcpConnLocalAddrType        IANATn3270eAddrType,
+    tn3270eTcpConnLocalAddress         IANATn3270eAddress,
+    tn3270eTcpConnLocalPort            Unsigned32,
+    tn3270eTcpConnLastActivity         TimeTicks,
+    tn3270eTcpConnBytesIn              Counter32,
+    tn3270eTcpConnBytesOut             Counter32,
+    tn3270eTcpConnResourceElement      SnaResourceName,
+    tn3270eTcpConnResourceType         IANATn3270ResourceType,
+    tn3270eTcpConnDeviceType           IANATn3270DeviceType,
+    tn3270eTcpConnFunctions            IANATn3270Functions,
+    tn3270eTcpConnId                   Unsigned32,
+    tn3270eTcpConnClientIdFormat       IANATn3270eClientType,
+    tn3270eTcpConnClientId             OCTET STRING,
+    tn3270eTcpConnTraceData            Tn3270eTraceData,
+    tn3270eTcpConnLogInfo              IANATn3270eLogData,
+    tn3270eTcpConnLuLuBindImage        OCTET STRING,
+    tn3270eTcpConnSnaState             INTEGER,
+    tn3270eTcpConnStateLastDiscReason  INTEGER,
+    tn3270eTcpConnSrvrConfIndex        Unsigned32,
+    tn3270eTcpConnActivationTime       TimeStamp
+    }
+
+tn3270eTcpConnRemAddrType OBJECT-TYPE
+    SYNTAX   IANATn3270eAddrType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of the value of the
+        tn3270eTcpConnRemAddress object.  For example,
+        ipv4(1) or ipv6(2)."
+    ::= { tn3270eTcpConnEntry 1 }
+
+tn3270eTcpConnRemAddress OBJECT-TYPE
+    SYNTAX      IANATn3270eAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The remote address associated with a TN3270E client.
+         tn3270eTcpConnRemAddrType indicates the address type
+
+         (IPv4 or IPv6, for example).
+
+         If a TN3270(E) client is connected to its
+         server via a proxy client the address represented by
+         the value of this object shall be the remote client's
+         address, not the proxy client's address."
+    ::= { tn3270eTcpConnEntry 2 }
+
+tn3270eTcpConnRemPort OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The remote port associated with a TN3270E client.  The value 0
+        is used if the tn3270eTcpConnRemAddrType identifies an address
+        type that does not support ports.
+
+        If a TN3270(E) client is connected to its server via a proxy
+        client, the port represented by the value of this object shall
+        be the remote client's port, not the proxy client's port."
+    ::= { tn3270eTcpConnEntry 3 }
+
+tn3270eTcpConnLocalAddrType OBJECT-TYPE
+    SYNTAX   IANATn3270eAddrType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of the value of the
+        tn3270eTcpConnLocalAddress object.  For example,
+        ipv4(1) or ipv6(2)."
+    ::= { tn3270eTcpConnEntry 4 }
+
+tn3270eTcpConnLocalAddress OBJECT-TYPE
+    SYNTAX      IANATn3270eAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The local address associated with a TN3270E client.
+         tn3270eTcpConnRemAddrType indicates the address type
+         (IPv4 or IPv6, for example)."
+    ::= { tn3270eTcpConnEntry 5 }
+
+tn3270eTcpConnLocalPort OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The remote port associated with a TN3270E client."
+    ::= { tn3270eTcpConnEntry 6 }
+
+tn3270eTcpConnLastActivity OBJECT-TYPE
+    SYNTAX   TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of 100ths of seconds since any data was
+         transferred for the associated TCP Connection."
+    DEFVAL  { 0 }
+    ::= { tn3270eTcpConnEntry 7 }
+
+tn3270eTcpConnBytesIn OBJECT-TYPE
+    SYNTAX   Counter32
+    UNITS "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes received by the server from TCP
+        for this connection.
+
+        A Management Station can detect discontinuities in
+        this counter by monitoring the
+        tn3270eTcpConnActivationTime object."
+    ::= { tn3270eTcpConnEntry 8 }
+
+tn3270eTcpConnBytesOut OBJECT-TYPE
+    SYNTAX   Counter32
+    UNITS "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes sent to TCP for this connection.
+
+        A Management Station can detect discontinuities in
+        this counter by monitoring the
+        tn3270eTcpConnActivationTime object."
+    ::= { tn3270eTcpConnEntry 9 }
+
+tn3270eTcpConnResourceElement OBJECT-TYPE
+    SYNTAX   SnaResourceName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "LU/Print secondary name for connecting an client
+         into an SNA network."
+    ::= { tn3270eTcpConnEntry 10 }
+
+tn3270eTcpConnResourceType OBJECT-TYPE
+    SYNTAX   IANATn3270ResourceType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the type of resource identified by
+         tn3270eTcpConnResourceElement."
+    ::= { tn3270eTcpConnEntry 11 }
+
+tn3270eTcpConnDeviceType OBJECT-TYPE
+    SYNTAX   IANATn3270DeviceType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the device type if negotiated with the
+        client.  A value of unknown(100) should be used as
+        the value of this object when a device type is not
+        negotiated.  Refer to RFC 2355 for how device types
+        can be negotiated."
+    ::= { tn3270eTcpConnEntry 12 }
+
+tn3270eTcpConnFunctions OBJECT-TYPE
+    SYNTAX   IANATn3270Functions
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates which of the TN3270 and TN3270E
+        functions were negotiated by the server and the client
+        for this TCP connection.
+
+        Refer to tn3270eSrvrFunctionsSupported for the list of
+        these functions supported by the server."
+    ::= { tn3270eTcpConnEntry 13 }
+
+tn3270eTcpConnId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The connection identifier associated with a TN3270 or
+         a TN3270E session's TCP connection.  TCP implementations
+         often assign a unique (with respect to itself) unsigned
+         integer as an identifier for a TCP connection.
+
+         The value 0 indicates that a connection does not have
+         a valid connection identifier."
+    ::= { tn3270eTcpConnEntry 14 }
+
+tn3270eTcpConnClientIdFormat OBJECT-TYPE
+    SYNTAX      IANATn3270eClientType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The format of a corresponding tn3270eTcpConnClientId
+        object as defined by the IANSTn3270eClientType textual
+        convention imported from the IANATn3270eTC-MIB."
+    ::= { tn3270eTcpConnEntry 15 }
+
+tn3270eTcpConnClientId OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..512))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Additional client identification information.  The
+        type of this information is indicated by the value of
+        the corresponding tn3270eTcpConnClientIdFormat object.
+        All values are returned in network-byte order.
+
+        The purpose of this object is to provide an alternate
+        means of identifying a client, other than though the
+        remote address returned in tn3270eTcpConnRemAddress."
+    ::= { tn3270eTcpConnEntry 16 }
+
+tn3270eTcpConnTraceData OBJECT-TYPE
+    SYNTAX   Tn3270eTraceData
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Trace data for this session."
+    ::= { tn3270eTcpConnEntry 17 }
+
+tn3270eTcpConnLogInfo OBJECT-TYPE
+    SYNTAX      IANATn3270eLogData
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Log information, encoded as specified in the
+        IANATn3270eLogData textual convention from the
+        IANAtn3270eTC-MIB."
+    ::= { tn3270eTcpConnEntry 18 }
+
+tn3270eTcpConnLuLuBindImage  OBJECT-TYPE
+    SYNTAX   OCTET STRING (SIZE (0..256))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "When there is a currently active LU-LU session for
+        this connection, this object returns the BIND Image
+        (defined to be bytes 1-p of the complete BIND Request
+        Unit -- see 'SNA Formats' for more information)
+        that was received from the PLU during session
+        activation.  When there is no active LU-LU session,
+        or when a BIND image is unavailable for some other
+        reason, this object returns a zero-length octet
+        string."
+    REFERENCE
+        "'Systems Network Architecture Formats', IBM
+        Publication GA27-3136."
+    ::= { tn3270eTcpConnEntry 19 }
+
+tn3270eTcpConnSnaState  OBJECT-TYPE
+    SYNTAX   INTEGER {
+                   unknown(1),
+                   noSluSession(2),
+                   sscpLuSession(3),  -- but no LU-LU session
+                   luLuSession(4),    -- but no SSCP-LU session
+                   sscpLuSessionAndLuLuSession(5)
+                      }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current state of the SNA side of the end-to-end
+        TN3270 connection.  The following states are defined:
+
+            unknown(1)          - The true state is not known.
+            noSluSession(2)     - The SLU has neither an SSCP-LU
+                                  nor an LU-LU session active.
+            sscpLuSession(3)    - The SSCP-LU session for the SLU
+                                  is active, but the SLU is not
+                                  currently in session with a PLU.
+            luLuSession(4)      - The SLU is currently in session
+                                  with a PLU, but the SSCP-LU
+                                  session for the LU is not active.
+            sscpLuSessionAndLuLuSession(5) - The SLU currently has
+                                  an active session with a PLU,
+                                  and the SSCP-LU session for the
+                                  SLU is active."
+    ::= { tn3270eTcpConnEntry 20 }
+
+tn3270eTcpConnStateLastDiscReason OBJECT-TYPE
+    SYNTAX   INTEGER {
+                  unknown(1),
+                  hostSendsUnbind(2),
+                  hostDontAcceptConnection(3),
+                  outOfResource(4),
+                  clientProtocolError(5),
+                  invalidDeviceName(6),
+                  deviceInUse(7),
+                  inactivityTimeout(8),
+                  hostNotResponding(9),
+                  clientNotResponding(10),
+                  serverClose(11),
+                  sysreqLogoff(12),
+                  serverSpecificHexCode(13)
+                     }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The last disconnect reason.  A session that has not
+        experienced a disconnect shall use the value unknown(1)
+        for this object.  Depending on when an implementation
+        removes entries from this table, certain states may
+        never be returned."
+    ::= { tn3270eTcpConnEntry 21 }
+
+tn3270eTcpConnSrvrConfIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "tn3270eSrvrConfIndex of the tn3270eSrvrConfEntry
+        belonging to the TN3270E server to which this entry
+        belongs."
+    ::= { tn3270eTcpConnEntry 22 }
+
+tn3270eTcpConnActivationTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of the sysUpTime object the last time
+        this TCP connection became active."
+    ::= { tn3270eTcpConnEntry 23 }
+
+tn3270eConfSpinLock OBJECT-TYPE
+    SYNTAX      TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "An advisory lock used to allow cooperating
+      TN3270E-MIB applications to coordinate their use
+
+      of the tn3270eSrvrConfTable, the tn3270eSrvrPortTable,
+      the tn3270eClientGroupTable, the tn3270eResPoolTable,
+      and the tn3270eClientResMapTable.
+
+      When creating a new entry or altering an existing entry
+      in the any of the tables mentioned above, an application
+      should make use of tn3270eRtSpinLock to serialize
+      application changes or additions.
+
+      Since this is an advisory lock, the use of this lock is
+      not enforced."
+    ::= { tn3270eObjects 10 }
+
+-- Conformance Definitions
+
+tn3270eGroups      OBJECT IDENTIFIER ::= { tn3270eConformance 1 }
+
+tn3270eCompliances OBJECT IDENTIFIER ::= { tn3270eConformance 2 }
+
+-- compliance statements
+
+tn3270eCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for agents that support the
+        TN3270E-MIB."
+    MODULE -- this module
+        MANDATORY-GROUPS { tn3270eBasicGroup,
+                           tn3270eSessionGroup
+                         }
+        GROUP       tn3270eResMapGroup
+        DESCRIPTION
+            "This group is optional and provides a method of
+            performing tn3270eClientGroup to tn3270eResPool
+            mapping."
+
+        GROUP       tn3270eHiCapacityGroup
+        DESCRIPTION
+            "This group is optional and provides for support
+            of high capacity counters."
+
+        OBJECT tn3270eSrvrConfConnectivityChk
+           MIN-ACCESS  read-only
+           DESCRIPTION
+              "The agent is not required to support a set to this
+               object if the associated TN3270E server doesn't
+               support either TIMING-MARK or NOP processing.  In
+               this case an agent should return noCheck on
+
+               retrieval."
+
+        OBJECT tn3270eSrvrConfTmNopInactTime
+           MIN-ACCESS  read-only
+           DESCRIPTION
+              "The agent is not required to support a set to this
+               object if the functions enabled by
+               tn3270eSrvrConfConnectivityChk are not supported.
+               An agent in this case should return a value of 0."
+
+        OBJECT tn3270eSrvrConfTmNopInterval
+           MIN-ACCESS  read-only
+           DESCRIPTION
+              "The agent is not required to support a set to this
+               object if the functions enabled by
+               tn3270eSrvrConfConnectivityChk are not supported.
+               An agent in this case should return a value of 0."
+
+       OBJECT  tn3270eSrvrConfAdminStatus
+           DESCRIPTION
+              "A TN3270E server is not required to support a
+               stopImmediate state transition."
+
+        OBJECT tn3270eSrvrConfRowStatus
+           MIN-ACCESS read-only
+           DESCRIPTION
+               "Write access is not required."
+
+        OBJECT tn3270eSrvrConfTmTimeout
+           MIN-ACCESS  read-only
+           DESCRIPTION
+              "The agent is not required to support a set to this
+               object if the functions enabled by
+               tn3270eSrvrConfConnectivityChk are not supported.
+               An agent in this case should return a value of 0."
+
+        OBJECT tn3270eSrvrPortRowStatus
+           MIN-ACCESS read-only
+           DESCRIPTION
+               "Write access is not required."
+
+        OBJECT tn3270eClientGroupRowStatus
+           MIN-ACCESS read-only
+           DESCRIPTION
+               "Write access is not required."
+
+        OBJECT tn3270eResPoolRowStatus
+           MIN-ACCESS read-only
+           DESCRIPTION
+               "Write access is not required."
+
+        OBJECT tn3270eClientResMapRowStatus
+           MIN-ACCESS read-only
+           DESCRIPTION
+               "Write access is not required."
+    ::= { tn3270eCompliances 1 }
+
+-- units of conformance
+
+tn3270eBasicGroup OBJECT-GROUP
+    OBJECTS {
+        tn3270eSrvrConfInactivityTimeout,
+        tn3270eSrvrConfConnectivityChk,
+        tn3270eSrvrConfTmNopInactTime,
+        tn3270eSrvrConfTmNopInterval,
+        tn3270eSrvrFunctionsSupported,
+        tn3270eSrvrConfAdminStatus,
+        tn3270eSrvrConfOperStatus,
+        tn3270eSrvrConfSessionTermState,
+        tn3270eSrvrConfSrvrType,
+        tn3270eSrvrConfContact,
+        tn3270eSrvrConfRowStatus,
+        tn3270eSrvrConfLastActTime,
+        tn3270eSrvrConfTmTimeout,
+        tn3270eSrvrPortRowStatus,
+        tn3270eSrvrStatsUpTime,
+        tn3270eSrvrStatsMaxTerms,
+        tn3270eSrvrStatsInUseTerms,
+        tn3270eSrvrStatsSpareTerms,
+        tn3270eSrvrStatsMaxPtrs,
+        tn3270eSrvrStatsInUsePtrs,
+        tn3270eSrvrStatsSparePtrs,
+        tn3270eSrvrStatsInConnects,
+        tn3270eSrvrStatsConnResrceRejs,
+        tn3270eSrvrStatsDisconnects,
+        tn3270eSrvrStatsInOctets,
+        tn3270eSrvrStatsOutOctets,
+        tn3270eSrvrStatsConnErrorRejs,
+        tn3270eClientGroupSubnetMask,
+        tn3270eClientGroupPfxLength,
+        tn3270eClientGroupRowStatus,
+        tn3270eSnaMapLocalName,
+        tn3270eSnaMapPrimaryLuName,
+        tn3270eConfSpinLock
+    }
+    STATUS  current
+    DESCRIPTION
+        "This group is mandatory for all hosts supporting the
+         TN3270E-MIB."
+    ::= { tn3270eGroups 1 }
+
+tn3270eSessionGroup OBJECT-GROUP
+    OBJECTS {
+        tn3270eResMapAddrType,
+        tn3270eResMapAddress,
+        tn3270eResMapPort,
+        tn3270eResMapElementType,
+        tn3270eResMapSscpSuppliedName,
+        tn3270eTcpConnLastActivity,
+        tn3270eTcpConnBytesIn,
+        tn3270eTcpConnBytesOut,
+        tn3270eTcpConnResourceElement,
+        tn3270eTcpConnResourceType,
+        tn3270eTcpConnDeviceType,
+        tn3270eTcpConnFunctions,
+        tn3270eTcpConnSrvrConfIndex,
+        tn3270eTcpConnActivationTime
+      }
+    STATUS  current
+    DESCRIPTION
+        "This group is mandatory for all hosts supporting the
+         TN3270E-MIB."
+    ::= { tn3270eGroups 2 }
+
+tn3270eResMapGroup OBJECT-GROUP
+    OBJECTS {
+        tn3270eResPoolElementType,
+        tn3270eResPoolRowStatus,
+        tn3270eClientResMapRowStatus,
+        tn3270eTcpConnId,
+        tn3270eTcpConnClientIdFormat,
+        tn3270eTcpConnClientId,
+        tn3270eTcpConnTraceData,
+        tn3270eTcpConnLogInfo,
+        tn3270eTcpConnLuLuBindImage,
+        tn3270eTcpConnSnaState,
+        tn3270eTcpConnStateLastDiscReason
+      }
+    STATUS  current
+    DESCRIPTION
+        "This group is optional for all hosts supporting the
+         TN3270E-MIB."
+    ::= { tn3270eGroups 3 }
+
+tn3270eHiCapacityGroup OBJECT-GROUP
+    OBJECTS {
+        tn3270eSrvrStatsHCInOctets,
+        tn3270eSrvrStatsHCOutOctets
+      }
+    STATUS  current
+    DESCRIPTION
+         "Support of these objects is REQUIRED when the
+         Counter32 versions can potentially wrap too
+         frequently.  This group is optional for all other
+         hosts supporting the TN3270E-MIB.
+
+         The IF-MIB (RFC 2233) requires that the 64-bit
+         versions of its counters be implemented when an
+         interface can support rates of around 20 million
+         bits per second or greater.  This implies a minimum
+         wrap rate of just over 28 minutes.  It is recommended
+         that this same guideline be used for determining
+         whether an implementation implements these objects.
+
+         This group contains two objects with the syntax
+         Counter64.  An implementation that doesn't support
+         these objects should return noSuchObject, since
+         returning a zero is misleading."
+    ::= { tn3270eGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/TN3270E-RT-MIB.mib b/snmp_builder/mibs/TN3270E-RT-MIB.mib
new file mode 100644
index 0000000..6d05707
--- /dev/null
+++ b/snmp_builder/mibs/TN3270E-RT-MIB.mib
@@ -0,0 +1,896 @@
+TN3270E-RT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Unsigned32, Gauge32
+                FROM SNMPv2-SMI
+    RowStatus, DateAndTime, TimeStamp, TestAndIncr
+                FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+                FROM SNMPv2-CONF
+    tn3270eSrvrConfIndex, tn3270eClientGroupName,
+    tn3270eResMapElementType
+                FROM TN3270E-MIB
+    IANATn3270eAddrType, IANATn3270eAddress
+                FROM IANATn3270eTC-MIB
+    snanauMIB
+                FROM SNA-NAU-MIB;
+
+  tn3270eRtMIB   MODULE-IDENTITY
+      LAST-UPDATED "9807270000Z" -- July 27, 1998
+      ORGANIZATION "TN3270E Working Group"
+      CONTACT-INFO
+        "Kenneth White (kennethw@vnet.ibm.com)
+         IBM Corp. - Dept. BRQA/Bldg. 501/G114
+         P.O. Box 12195
+
+         3039 Cornwallis
+         RTP, NC 27709-2195
+
+         Robert Moore (remoore@us.ibm.com)
+         IBM Corp. - Dept. BRQA/Bldg. 501/G114
+         P.O. Box 12195
+         3039 Cornwallis
+         RTP, NC 27709-2195
+         (919) 254-4436"
+     DESCRIPTION
+        "This module defines a portion of the management
+        information base (MIB) that enables monitoring of
+        TN3270 and TN3270E clients' response times by a
+        TN3270E server."
+     REVISION  "9807270000Z" -- July 27, 1998
+     DESCRIPTION
+         "RFC nnnn (Proposed Standard)" -- RFC Editor to fill in
+::= { snanauMIB 9 }
+-- snanauMIB ::= { mib-2 34 }
+
+-- Top level structure of the MIB
+
+tn3270eRtNotifications   OBJECT IDENTIFIER  ::= { tn3270eRtMIB 0 }
+tn3270eRtObjects         OBJECT IDENTIFIER  ::= { tn3270eRtMIB 1 }
+tn3270eRtConformance     OBJECT IDENTIFIER  ::= { tn3270eRtMIB 3 }
+
+-- MIB Objects
+
+-- Response Time Control Table
+
+tn3270eRtCollCtlTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF Tn3270eRtCollCtlEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "The response time monitoring collection control table,
+      which allows a management application to control the
+      types of response time data being collected, and the
+      clients for which it is being collected.
+
+      This table is indexed by tn3270eSrvrConfIndex and
+      tn3270eClientGroupName imported from the
+      TN3270E-MIB.  tn3270eSrvrConfIndex indicates within
+      a host which TN3270E server an entry applies to.
+      tn3270eClientGroupName it identifies the set of IP
+      clients for which response time data is being collected.
+      The particular IP clients making up the set are identified
+      in the tn3270eClientGroupTable in the TN3270E-MIB."
+    ::= { tn3270eRtObjects 1}
+
+tn3270eRtCollCtlEntry    OBJECT-TYPE
+    SYNTAX        Tn3270eRtCollCtlEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+      "An entry in the TN3270E response time monitoring collection
+      control table.  To handle the case of multiple TN3270E
+      servers on the same host, the first index of this table is
+      the tn3270eSrvrConfIndex from the TN3270E-MIB."
+    INDEX {
+      tn3270eSrvrConfIndex,    -- Server's index
+      tn3270eClientGroupName } -- What to collect on
+    ::= { tn3270eRtCollCtlTable 1 }
+
+Tn3270eRtCollCtlEntry ::= SEQUENCE {
+    tn3270eRtCollCtlType              BITS,
+    tn3270eRtCollCtlSPeriod           Unsigned32,
+    tn3270eRtCollCtlSPMult            Unsigned32,
+    tn3270eRtCollCtlThreshHigh        Unsigned32,
+    tn3270eRtCollCtlThreshLow         Unsigned32,
+    tn3270eRtCollCtlIdleCount         Unsigned32,
+    tn3270eRtCollCtlBucketBndry1      Unsigned32,
+    tn3270eRtCollCtlBucketBndry2      Unsigned32,
+    tn3270eRtCollCtlBucketBndry3      Unsigned32,
+    tn3270eRtCollCtlBucketBndry4      Unsigned32,
+    tn3270eRtCollCtlRowStatus         RowStatus   }
+
+-- The OID { tn3270eRtCollCtlEntry 1 } is not used
+
+tn3270eRtCollCtlType  OBJECT-TYPE
+    SYNTAX    BITS {
+                     aggregate(0),
+                     excludeIpComponent(1),
+                     ddr(2),
+                     average(3),
+                     buckets(4),
+                     traps(5)
+                   }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+      "This object controls what types of response time data to
+       collect, whether to summarize the data across the members
+       of a client group or keep it individually, whether to
+       introduce dynamic definite responses, and whether to
+       generate traps.
+
+       aggregate(0)          - Aggregate response time data for the
+                               client group as a whole.  If this bit
+                               is set to 0, then maintain response
+                               time data separately for each member
+                               of the client group.
+       excludeIpComponent(1) - Do not include the IP-network
+                               component in any response times.
+       ddr(2)                - Enable dynamic definite response.
+       average(3)            - Produce an average response time
+                               based on a specified collection
+                               interval.
+       buckets(4)            - Maintain tn3270eRtDataBucket values in
+                               a corresponding tn3270eRtDataEntry,
+                               based on the bucket boundaries specified
+                               in the tn3270eRtCollCtlBucketBndry
+                               objects          .
+       traps(5)              - generate the notifications specified
+                               in this MIB module.  The
+                               tn3270eRtExceeded and tn3270eRtOkay
+                               notifications are generated only if
+                               average(3) is also specified."
+    ::= { tn3270eRtCollCtlEntry 2 }
+
+tn3270eRtCollCtlSPeriod OBJECT-TYPE
+    SYNTAX  Unsigned32 (15..86400) -- 15 second min, 24 hour max
+    UNITS   "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+      "The number of seconds that defines the sample period.
+       The actual interval is defined as tn3270eRtCollCtlSPeriod
+       times tn3270eRtCollCtlSPMult.
+
+       The value of this object is used only if the corresponding
+       tn3270eRtCollCtlType has the average(3) setting."
+    DEFVAL   {20}    -- 20 seconds
+    ::= { tn3270eRtCollCtlEntry 3 }
+
+tn3270eRtCollCtlSPMult OBJECT-TYPE
+    SYNTAX  Unsigned32 (1..5760) -- 5760 x SPeriod of 15 is 24 hours
+    UNITS   "period"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+      "The sample period multiplier; this value is multiplied by
+      the sample period, tn3270eRtCollCtlSPeriod, to determine
+      the collection interval.
+
+      Sliding-window average calculation can, if necessary, be
+      disabled, by setting the sample period multiplier,
+      tn3270eRtCollCtlSPMult, to 1, and setting the sample
+      period, tn3270eRtCollCtlSPeriod, to the required
+      collection interval.
+
+      The value of this object is used only if the corresponding
+      tn3270eRtCollCtlType has the average(3) setting."
+    DEFVAL   { 30 }    -- yields an interval of 10 minutes when
+                       -- used with the default SPeriod value
+    ::= { tn3270eRtCollCtlEntry 4 }
+
+tn3270eRtCollCtlThreshHigh  OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "seconds"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The threshold for generating a tn3270eRtExceeded
+      notification, signalling that a monitored total response
+      time has exceeded the specified limit.  A value of zero
+      for this object suppresses generation of this notification.
+      The value of this object is used only if the corresponding
+      tn3270eRtCollCtlType has average(3) and traps(5) selected.
+
+      A tn3270eRtExceeded notification is not generated again for a
+      tn3270eRtDataEntry until an average response time falling below
+      the low threshold tn3270eRtCollCtlThreshLow specified for the
+      client group has occurred for the entry."
+    DEFVAL   { 0 }   -- suppress notifications
+    ::= { tn3270eRtCollCtlEntry 5 }
+
+tn3270eRtCollCtlThreshLow   OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "seconds"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The threshold for generating a tn3270eRtOkay notification,
+      signalling that a monitored total response time has fallen
+      below the specified limit.  A value of zero for this object
+      suppresses generation of this notification.  The value of
+      this object is used only if the corresponding
+      tn3270eRtCollCtlType has average(3) and traps(5) selected.
+
+      A tn3270eRtOkay notification is not generated again for a
+      tn3270eRtDataEntry until an average response time
+
+      exceeding the high threshold tn3270eRtCollCtlThreshHigh
+      specified for the client group has occurred for the entry."
+    DEFVAL   { 0 }   -- suppress notifications
+    ::= { tn3270eRtCollCtlEntry 6 }
+
+tn3270eRtCollCtlIdleCount   OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "transactions"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The value of this object is used to determine whether a
+      sample that yields an average response time exceeding the
+      value of tn3270eRtCollCtlThreshHigh was a statistically
+      valid one.  If the following statement is true, then the
+      sample was statistically valid, and so a tn3270eRtExceeded
+      notification should be generated:
+
+        AvgCountTrans * ((AvgRt/ThreshHigh - 1) ** 2) >=  IdleCount
+
+      This comparison is done only if the corresponding
+      tn3270eRtCollCtlType has average(3) and traps(5) selected."
+    DEFVAL { 1 }
+    ::= { tn3270eRtCollCtlEntry 7 }
+
+tn3270eRtCollCtlBucketBndry1   OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "tenths of seconds"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The value of this object defines the range of transaction
+       response times counted in the Tn3270eRtDataBucket1Rts
+       object: those less than or equal to this value."
+    DEFVAL { 10 }
+    ::= { tn3270eRtCollCtlEntry 8 }
+
+tn3270eRtCollCtlBucketBndry2   OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "tenths of seconds"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The value of this object, together with that of the
+      tn3270eRtCollCtlBucketBndry1 object, defines the range
+      of transaction response times counted in the
+      Tn3270eRtDataBucket2Rts object: those greater than the
+      value of the tn3270eRtCollCtlBucketBndry1 object, and
+
+      less than or equal to the value of this object."
+    DEFVAL { 20 }
+    ::= { tn3270eRtCollCtlEntry 9 }
+
+tn3270eRtCollCtlBucketBndry3   OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "tenths of seconds"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The value of this object, together with that of the
+      tn3270eRtCollCtlBucketBndry2 object, defines the range of
+      transaction response times counted in the
+      Tn3270eRtDataBucket3Rts object:  those greater than the
+      value of the tn3270eRtCollCtlBucketBndry2 object, and less
+      than or equal to the value of this object."
+    DEFVAL { 50 }
+    ::= { tn3270eRtCollCtlEntry 10 }
+
+tn3270eRtCollCtlBucketBndry4   OBJECT-TYPE
+    SYNTAX            Unsigned32
+    UNITS             "tenths of seconds"
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "The value of this object, together with that of the
+      tn3270eRtCollCtlBucketBndry3 object, defines the range
+      of transaction response times counted in the
+      Tn3270eRtDataBucket4Rts object: those greater than the
+      value of the tn3270eRtCollCtlBucketBndry3 object, and
+      less than or equal to the value of this object.
+
+      The value of this object also defines the range of
+      transaction response times counted in the
+      Tn3270eRtDataBucket5Rts object: those greater than the
+      value of this object."
+    DEFVAL { 100 }
+    ::= { tn3270eRtCollCtlEntry 11 }
+
+tn3270eRtCollCtlRowStatus  OBJECT-TYPE
+    SYNTAX            RowStatus
+    MAX-ACCESS        read-create
+    STATUS            current
+    DESCRIPTION
+      "This object allows entries to be created and deleted
+       in the tn3270eRtCollCtlTable.  An entry in this table
+       is deleted by setting this object to destroy(6).
+       Deleting an entry in this table has the side-effect
+
+       of removing all entries from the tn3270eRtDataTable
+       that are associated with the entry being deleted."
+    ::= { tn3270eRtCollCtlEntry 12 }
+
+-- TN3270E Response Time Data Table
+
+tn3270eRtDataTable  OBJECT-TYPE
+    SYNTAX       SEQUENCE OF Tn3270eRtDataEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "The response time data table.  Entries in this table are
+       created based on entries in the tn3270eRtCollCtlTable."
+    ::= { tn3270eRtObjects 2 }
+
+tn3270eRtDataEntry  OBJECT-TYPE
+    SYNTAX        Tn3270eRtDataEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+      "Entries in this table are created based upon the
+      tn3270eRtCollCtlTable.  When the corresponding
+      tn3270eRtCollCtlType has aggregate(0) specified, a single
+      entry is created in this table, with a tn3270eRtDataClientAddrType
+      of unknown(0), a zero-length octet string value for
+      tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of
+      0.  When aggregate(0) is not specified, a separate entry is
+      created for each client in the group.
+
+      Note that the following objects defined within an entry in this
+      table can  wrap:
+          tn3270eRtDataTotalRts
+          tn3270eRtDataTotalIpRts
+          tn3270eRtDataCountTrans
+          tn3270eRtDataCountDrs
+          tn3270eRtDataElapsRnTrpSq
+          tn3270eRtDataElapsIpRtSq
+          tn3270eRtDataBucket1Rts
+          tn3270eRtDataBucket2Rts
+          tn3270eRtDataBucket3Rts
+          tn3270eRtDataBucket4Rts
+          tn3270eRtDataBucket5Rts"
+    INDEX {
+       tn3270eSrvrConfIndex,      -- Server's local index
+       tn3270eClientGroupName,    -- Collection target
+       tn3270eRtDataClientAddrType,
+       tn3270eRtDataClientAddress,
+       tn3270eRtDataClientPort }
+    ::= { tn3270eRtDataTable 1 }
+
+Tn3270eRtDataEntry ::= SEQUENCE {
+       tn3270eRtDataClientAddrType        IANATn3270eAddrType,
+       tn3270eRtDataClientAddress         IANATn3270eAddress,
+       tn3270eRtDataClientPort            Unsigned32,
+       tn3270eRtDataAvgRt                 Gauge32,
+       tn3270eRtDataAvgIpRt               Gauge32,
+       tn3270eRtDataAvgCountTrans         Gauge32,
+       tn3270eRtDataIntTimeStamp          DateAndTime,
+       tn3270eRtDataTotalRts              Counter32,
+       tn3270eRtDataTotalIpRts            Counter32,
+       tn3270eRtDataCountTrans            Counter32,
+       tn3270eRtDataCountDrs              Counter32,
+       tn3270eRtDataElapsRndTrpSq         Unsigned32,
+       tn3270eRtDataElapsIpRtSq           Unsigned32,
+       tn3270eRtDataBucket1Rts            Counter32,
+       tn3270eRtDataBucket2Rts            Counter32,
+       tn3270eRtDataBucket3Rts            Counter32,
+       tn3270eRtDataBucket4Rts            Counter32,
+       tn3270eRtDataBucket5Rts            Counter32,
+       tn3270eRtDataRtMethod              INTEGER,
+       tn3270eRtDataDiscontinuityTime     TimeStamp
+   }
+
+tn3270eRtDataClientAddrType   OBJECT-TYPE
+    SYNTAX    IANATn3270eAddrType
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "Indicates the type of address represented by the value
+      of tn3270eRtDataClientAddress.  The value unknown(0) is
+      used if aggregate data is being collected for the client
+      group."
+    ::= { tn3270eRtDataEntry 1 }
+
+tn3270eRtDataClientAddress   OBJECT-TYPE
+    SYNTAX    IANATn3270eAddress
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "Contains the IP address of the TN3270 client being
+      monitored.  A zero-length octet string is used if
+      aggregate data is being collected for the client group."
+    ::= { tn3270eRtDataEntry 2 }
+
+tn3270eRtDataClientPort   OBJECT-TYPE
+    SYNTAX       Unsigned32(0..65535)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+      "Contains the client port number of the TN3270 client being
+      monitored.  The value 0 is used if aggregate data is being
+      collected for the client group, or if the
+      tn3270eRtDataClientAddrType identifies an address type that
+      does not support ports."
+    ::= { tn3270eRtDataEntry 3 }
+
+tn3270eRtDataAvgRt OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "tenths of seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The average total response time measured over the last
+      collection interval."
+    DEFVAL { 0 }
+    ::= { tn3270eRtDataEntry 4 }
+
+tn3270eRtDataAvgIpRt OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "tenths of seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The average IP response time measured over the last
+      collection interval."
+    DEFVAL { 0 }
+    ::= { tn3270eRtDataEntry 5 }
+
+tn3270eRtDataAvgCountTrans   OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "transactions"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The sliding transaction count used for calculating the
+      values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt
+      objects.  The actual transaction count is available in
+      the tn3270eRtDataCountTrans object.
+
+      The initial value of this object, before any averages have
+      been calculated, is 0."
+    ::= { tn3270eRtDataEntry 6 }
+
+tn3270eRtDataIntTimeStamp   OBJECT-TYPE
+    SYNTAX       DateAndTime
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The date and time of the last interval that
+      tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and
+      tn3270eRtDataAvgCountTrans were calculated.
+
+      Prior to the calculation of the first interval
+      averages, this object returns the value
+      0x0000000000000000000000.  When this value is
+      returned, the remaining objects in the entry have
+      no significance."
+    ::= { tn3270eRtDataEntry 7 }
+
+tn3270eRtDataTotalRts   OBJECT-TYPE
+    SYNTAX       Counter32
+    UNITS        "tenths of seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the total response times collected.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 8 }
+
+tn3270eRtDataTotalIpRts   OBJECT-TYPE
+    SYNTAX       Counter32
+    UNITS        "tenths of seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the total IP-network response times
+      collected.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 9 }
+
+tn3270eRtDataCountTrans   OBJECT-TYPE
+    SYNTAX       Counter32
+    UNITS        "transactions"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the total number of transactions detected.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 10 }
+
+tn3270eRtDataCountDrs   OBJECT-TYPE
+    SYNTAX       Counter32
+    UNITS        "definite responses"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the total number of definite responses
+      detected.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 11 }
+
+tn3270eRtDataElapsRndTrpSq   OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "tenths of seconds squared"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The sum of the elapsed round trip time squared.  The sum
+      of the squares is kept in order to enable calculation of
+      a variance."
+    DEFVAL { 0 }
+    ::= { tn3270eRtDataEntry 12 }
+
+tn3270eRtDataElapsIpRtSq   OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "tenths of seconds squared"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The sum of the elapsed IP round trip time squared.
+      The sum of the squares is kept in order to enable
+      calculation of a variance."
+    DEFVAL { 0 }
+    ::= { tn3270eRtDataEntry 13 }
+
+tn3270eRtDataBucket1Rts   OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the response times falling into bucket 1.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 14 }
+
+tn3270eRtDataBucket2Rts   OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the response times falling into bucket 2.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 15 }
+
+tn3270eRtDataBucket3Rts   OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the response times falling into bucket 3.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 16 }
+
+tn3270eRtDataBucket4Rts  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the response times falling into bucket 4.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 17 }
+
+tn3270eRtDataBucket5Rts  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The count of the response times falling into bucket 5.
+
+      A management application can detect discontinuities in this
+      counter by monitoring the tn3270eRtDataDiscontinuityTime
+      object."
+    ::= { tn3270eRtDataEntry 18 }
+
+tn3270eRtDataRtMethod OBJECT-TYPE
+    SYNTAX       INTEGER {
+                           none(0),
+                           responses(1),
+                           timingMark(2)
+                         }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+      "The value of this object indicates the method that was
+      used in calculating the IP network time.
+
+      The value 'none(0) indicates that response times were not
+      calculated for the IP network."
+    ::= { tn3270eRtDataEntry 19 }
+
+tn3270eRtDataDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at
+        which one or more of this entry's counter objects
+        suffered a discontinuity.  This may happen if a TN3270E
+        server is stopped and then restarted, and local methods
+        are used to set up collection policy
+        (tn3270eRtCollCtlTable entries)."
+    ::= { tn3270eRtDataEntry 20 }
+
+tn3270eRtSpinLock OBJECT-TYPE
+    SYNTAX      TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+      "An advisory lock used to allow cooperating TN3270E-RT-MIB
+      applications to coordinate their use of the
+      tn3270eRtCollCtlTable.
+
+      When creating a new entry or altering an existing entry
+      in the tn3270eRtCollCtlTable, an application should make
+      use of tn3270eRtSpinLock to serialize application changes
+      or additions.
+
+      Since this is an advisory lock, the use of this lock is
+      not enforced."
+    ::= { tn3270eRtObjects 3 }
+
+-- Notifications
+
+tn3270eRtExceeded   NOTIFICATION-TYPE
+    OBJECTS {
+       tn3270eRtDataIntTimeStamp,
+       tn3270eRtDataAvgRt,
+       tn3270eRtDataAvgIpRt,
+       tn3270eRtDataAvgCountTrans,
+       tn3270eRtDataRtMethod
+    }
+    STATUS  current
+    DESCRIPTION
+      "This notification is generated when the average response
+      time, tn3270eRtDataAvgRt, exceeds
+      tn3270eRtCollCtlThresholdHigh at the end of a collection
+      interval specified by tn3270eCollCtlSPeriod
+      times tn3270eCollCtlSPMult.  Note that the corresponding
+      tn3270eCollCtlType must have traps(5) and average(3) set
+      for this notification to be generated.  In addition,
+      tn3270eRtDataAvgCountTrans, tn3270eRtCollCtlThreshHigh, and
+      tn3270eRtDataAvgRt are algorithmically compared to
+      tn3270eRtCollCtlIdleCount for determination if this
+      notification will be suppressed."
+    ::= { tn3270eRtNotifications 1 }
+
+tn3270eRtOkay   NOTIFICATION-TYPE
+    OBJECTS {
+       tn3270eRtDataIntTimeStamp,
+       tn3270eRtDataAvgRt,
+       tn3270eRtDataAvgIpRt,
+       tn3270eRtDataAvgCountTrans,
+       tn3270eRtDataRtMethod
+    }
+    STATUS  current
+    DESCRIPTION
+      "This notification is generated when the average response
+      time, tn3270eRtDataAvgRt, falls below
+      tn3270eRtCollCtlThresholdLow at the end of a collection
+      interval specified by tn3270eCollCtlSPeriod times
+
+      tn3270eCollCtlSPMult, after a tn3270eRtExceeded
+      notification was generated.  Note that the corresponding
+      tn3270eCollCtlType must have traps(5) and average(3)
+      set for this notification to be generated."
+    ::= { tn3270eRtNotifications 2 }
+
+tn3270eRtCollStart NOTIFICATION-TYPE
+    OBJECTS {
+       tn3270eRtDataRtMethod,       -- type of collection
+       tn3270eResMapElementType     -- type of resource
+    }
+    STATUS  current
+    DESCRIPTION
+      "This notification is generated when response time data
+      collection is enabled for a member of a client group.
+      In order for this notification to occur the corresponding
+      tn3270eRtCollCtlType must have traps(5) selected.
+
+      tn3270eResMapElementType contains a valid value only if
+      tn3270eRtDataClientAddress contains a valid address
+      (rather than a zero-length octet string)."
+    ::= { tn3270eRtNotifications 3 }
+
+tn3270eRtCollEnd   NOTIFICATION-TYPE
+    OBJECTS {
+       tn3270eRtDataDiscontinuityTime,
+       tn3270eRtDataAvgRt,
+       tn3270eRtDataAvgIpRt,
+       tn3270eRtDataAvgCountTrans,
+       tn3270eRtDataIntTimeStamp,
+       tn3270eRtDataTotalRts,
+       tn3270eRtDataTotalIpRts,
+       tn3270eRtDataCountTrans,
+       tn3270eRtDataCountDrs,
+       tn3270eRtDataElapsRndTrpSq,
+       tn3270eRtDataElapsIpRtSq,
+       tn3270eRtDataBucket1Rts,
+       tn3270eRtDataBucket2Rts,
+       tn3270eRtDataBucket3Rts,
+       tn3270eRtDataBucket4Rts,
+       tn3270eRtDataBucket5Rts,
+       tn3270eRtDataRtMethod
+    }
+    STATUS  current
+    DESCRIPTION
+      "This notification is generated when an tn3270eRtDataEntry
+      is deleted after being active (actual data collected), in
+      order to enable a management application monitoring an
+
+      tn3270eRtDataEntry to get the entry's final values.  Note
+      that the corresponding tn3270eCollCtlType must have traps(5)
+      set for this notification to be generated."
+    ::= { tn3270eRtNotifications 4 }
+
+-- Conformance Statement
+
+tn3270eRtGroups       OBJECT IDENTIFIER ::= { tn3270eRtConformance 1 }
+tn3270eRtCompliances  OBJECT IDENTIFIER ::= { tn3270eRtConformance 2 }
+
+-- Compliance statements
+
+tn3270eRtCompliance     MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+      "The compliance statement for agents that support the
+      TN327E-RT-MIB."
+    MODULE   -- this module
+       MANDATORY-GROUPS { tn3270eRtGroup, tn3270eRtNotGroup }
+
+    OBJECT tn3270eRtCollCtlType
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation to
+          this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlSPeriod
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to allow the user to change
+          the default value of this object, and is allowed to
+          use a different default."
+
+    OBJECT tn3270eRtCollCtlSPMult
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlThreshHigh
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlThreshLow
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlIdleCount
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlBucketBndry1
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlBucketBndry2
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlBucketBndry3
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlBucketBndry4
+       MIN-ACCESS  read-only
+       DESCRIPTION
+          "The agent is not required to support a SET operation
+          to this object in the absence of adequate security."
+
+    OBJECT tn3270eRtCollCtlRowStatus
+       SYNTAX   INTEGER {
+                         active(1) -- subset of RowStatus
+                        }
+       MIN-ACCESS read-only
+       DESCRIPTION
+          "Write access is not required, and only one of the six
+          enumerated values for the RowStatus textual convention
+          need be supported, specifically: active(1)."
+    ::= {tn3270eRtCompliances 1 }
+
+-- Group definitions
+
+tn3270eRtGroup         OBJECT-GROUP
+
+    OBJECTS {
+        tn3270eRtCollCtlType,
+        tn3270eRtCollCtlSPeriod,
+        tn3270eRtCollCtlSPMult,
+        tn3270eRtCollCtlThreshHigh,
+        tn3270eRtCollCtlThreshLow,
+        tn3270eRtCollCtlIdleCount,
+        tn3270eRtCollCtlBucketBndry1,
+        tn3270eRtCollCtlBucketBndry2,
+        tn3270eRtCollCtlBucketBndry3,
+        tn3270eRtCollCtlBucketBndry4,
+        tn3270eRtCollCtlRowStatus,
+        tn3270eRtDataDiscontinuityTime,
+        tn3270eRtDataAvgRt,
+        tn3270eRtDataAvgIpRt,
+        tn3270eRtDataAvgCountTrans,
+        tn3270eRtDataIntTimeStamp,
+        tn3270eRtDataTotalRts,
+        tn3270eRtDataTotalIpRts,
+        tn3270eRtDataCountTrans,
+        tn3270eRtDataCountDrs,
+        tn3270eRtDataElapsRndTrpSq,
+        tn3270eRtDataElapsIpRtSq,
+        tn3270eRtDataBucket1Rts,
+        tn3270eRtDataBucket2Rts,
+        tn3270eRtDataBucket3Rts,
+        tn3270eRtDataBucket4Rts,
+        tn3270eRtDataBucket5Rts,
+        tn3270eRtDataRtMethod,
+        tn3270eRtSpinLock }
+    STATUS  current
+    DESCRIPTION
+      "This group is mandatory for all implementations that
+      support the TN3270E-RT-MIB. "
+    ::= { tn3270eRtGroups 1 }
+
+tn3270eRtNotGroup         NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        tn3270eRtExceeded,
+        tn3270eRtOkay,
+        tn3270eRtCollStart,
+        tn3270eRtCollEnd
+     }
+    STATUS  current
+    DESCRIPTION
+      "The notifications that must be supported when the
+      TN3270E-RT-MIB is implemented. "
+    ::= { tn3270eRtGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/TOKEN-RING-RMON-MIB.mib b/snmp_builder/mibs/TOKEN-RING-RMON-MIB.mib
new file mode 100644
index 0000000..6b72c2a
--- /dev/null
+++ b/snmp_builder/mibs/TOKEN-RING-RMON-MIB.mib
@@ -0,0 +1,2302 @@
+TOKEN-RING-RMON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Counter, TimeTicks          FROM RFC1155-SMI
+    OBJECT-TYPE                 FROM RFC-1212
+    OwnerString, EntryStatus,   -- Textual Conventions
+    rmon, statistics, history
+                                FROM RFC1271-MIB;
+
+   -- All representations of MAC addresses in this MIB
+   -- Module use, as a textual convention (i.e. this
+   -- convention does not affect their encoding), the
+   -- data type:
+
+   MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet
+                                          -- address in
+                                          -- the "canonical"
+                                          -- order
+   -- defined by IEEE 802.1a, i.e., as if it were
+   -- transmitted least significant bit first, even though
+   -- 802.5 (in contrast to other 802.x protocols) requires
+   -- MAC addresses to be transmitted most significant bit
+   -- first.
+
+    TimeInterval ::= INTEGER
+    -- A period of time, measured in units of 0.01 seconds.
+
+--  This MIB module uses the extended OBJECT-TYPE macro as
+--  defined in [2].
+
+--  Token Ring Remote Network Monitoring MIB
+
+    tokenRing             OBJECT IDENTIFIER ::= { rmon 10 }
+
+-- The Token Ring Mac-Layer Statistics Group
+--
+-- Implementation of this group is optional
+
+tokenRingMLStatsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF TokenRingMLStatsEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of Mac-Layer Token Ring statistics
+
+            entries."
+    ::= { statistics 2 }
+
+tokenRingMLStatsEntry OBJECT-TYPE
+    SYNTAX TokenRingMLStatsEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of Mac-Layer statistics kept for a
+            particular Token Ring interface."
+    INDEX { tokenRingMLStatsIndex }
+    ::= { tokenRingMLStatsTable 1 }
+
+-- As an example, an instance of the
+-- tokenRingMLStatsMacOctets object
+-- might be named tokenRingMLStatsMacOctets.1
+
+TokenRingMLStatsEntry ::= SEQUENCE {
+    tokenRingMLStatsIndex                     INTEGER,
+    tokenRingMLStatsDataSource            OBJECT IDENTIFIER,
+    tokenRingMLStatsDropEvents                Counter,
+    tokenRingMLStatsMacOctets                 Counter,
+    tokenRingMLStatsMacPkts                   Counter,
+    tokenRingMLStatsRingPurgeEvents           Counter,
+    tokenRingMLStatsRingPurgePkts             Counter,
+    tokenRingMLStatsBeaconEvents              Counter,
+    tokenRingMLStatsBeaconTime                TimeInterval,
+    tokenRingMLStatsBeaconPkts                Counter,
+    tokenRingMLStatsClaimTokenEvents          Counter,
+    tokenRingMLStatsClaimTokenPkts            Counter,
+    tokenRingMLStatsNAUNChanges               Counter,
+    tokenRingMLStatsLineErrors                Counter,
+    tokenRingMLStatsInternalErrors            Counter,
+    tokenRingMLStatsBurstErrors               Counter,
+    tokenRingMLStatsACErrors                  Counter,
+    tokenRingMLStatsAbortErrors               Counter,
+    tokenRingMLStatsLostFrameErrors           Counter,
+    tokenRingMLStatsCongestionErrors          Counter,
+    tokenRingMLStatsFrameCopiedErrors         Counter,
+    tokenRingMLStatsFrequencyErrors           Counter,
+    tokenRingMLStatsTokenErrors               Counter,
+    tokenRingMLStatsSoftErrorReports          Counter,
+    tokenRingMLStatsRingPollEvents            Counter,
+    tokenRingMLStatsOwner                     OwnerString,
+    tokenRingMLStatsStatus                    EntryStatus
+}
+
+tokenRingMLStatsIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies this
+            tokenRingMLStats entry."
+    ::= { tokenRingMLStatsEntry 1 }
+
+tokenRingMLStatsDataSource OBJECT-TYPE
+    SYNTAX OBJECT IDENTIFIER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "This object identifies the source of the data
+            that this tokenRingMLStats entry is configured to
+            analyze.  This source can be any tokenRing
+            interface on this device.  In order to identify a
+            particular interface, this object shall identify
+            the instance of the ifIndex object, defined in
+            MIB-II [3], for the desired interface.  For
+            example, if an entry were to receive data from
+            interface #1, this object would be set to
+            ifIndex.1.
+
+            The statistics in this group reflect all error
+            reports on the local network segment attached to
+            the identified interface.
+
+            This object may not be modified if the associated
+            tokenRingMLStatsStatus object is equal to
+            valid(1)."
+    ::= { tokenRingMLStatsEntry 2 }
+
+tokenRingMLStatsDropEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of events in which packets were
+            dropped by the probe due to lack of resources.
+            Note that this number is not necessarily the
+            number of packets dropped; it is just the number
+            of times this condition has been detected.  This
+            value is the same as the corresponding
+            tokenRingPStatsDropEvents."
+    ::= { tokenRingMLStatsEntry 3 }
+
+tokenRingMLStatsMacOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of octets of data in MAC packets
+            (excluding those that were not good frames)
+            received on the network (excluding framing bits
+            but including FCS octets)."
+    ::= { tokenRingMLStatsEntry 4 }
+
+tokenRingMLStatsMacPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of MAC packets (excluding
+            packets that were not good frames) received."
+    ::= { tokenRingMLStatsEntry 5 }
+
+tokenRingMLStatsRingPurgeEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of times that the ring enters
+            the ring purge state from normal ring state.  The
+            ring purge state that comes in response to the
+            claim token or beacon state is not counted."
+    ::= { tokenRingMLStatsEntry 6 }
+
+tokenRingMLStatsRingPurgePkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of ring purge MAC packets
+            detected by probe."
+    ::= { tokenRingMLStatsEntry 7 }
+
+tokenRingMLStatsBeaconEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of times that the ring enters a
+            beaconing state (beaconFrameStreamingState,
+            beaconBitStreamingState,
+            beaconSetRecoveryModeState, or
+            beaconRingSignalLossState) from a non-beaconing
+            state.  Note that a change of the source address
+            of the beacon packet does not constitute a new
+            beacon event."
+    ::= { tokenRingMLStatsEntry 8 }
+
+tokenRingMLStatsBeaconTime OBJECT-TYPE
+    SYNTAX TimeInterval
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total amount of time that the ring has been
+            in the beaconing state."
+    ::= { tokenRingMLStatsEntry 9 }
+
+tokenRingMLStatsBeaconPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of beacon MAC packets detected
+            by the probe."
+    ::= { tokenRingMLStatsEntry 10 }
+
+tokenRingMLStatsClaimTokenEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of times that the ring enters
+            the claim token state from normal ring state or
+            ring purge state.  The claim token state that
+            comes in response to a beacon state is not
+            counted."
+    ::= { tokenRingMLStatsEntry 11 }
+
+tokenRingMLStatsClaimTokenPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of claim token MAC packets
+            detected by the probe."
+    ::= { tokenRingMLStatsEntry 12 }
+
+tokenRingMLStatsNAUNChanges OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of NAUN changes detected by the
+            probe."
+    ::= { tokenRingMLStatsEntry 13 }
+
+tokenRingMLStatsLineErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of line errors reported in error
+            reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 14 }
+
+tokenRingMLStatsInternalErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of adapter internal errors
+            reported in error reporting packets detected by
+            the probe."
+    ::= { tokenRingMLStatsEntry 15 }
+
+tokenRingMLStatsBurstErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of burst errors reported in
+            error reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 16 }
+
+tokenRingMLStatsACErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of AC (Address Copied)  errors
+            reported in error reporting packets detected by
+            the probe."
+    ::= { tokenRingMLStatsEntry 17 }
+
+tokenRingMLStatsAbortErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of abort delimiters reported in
+            error reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 18 }
+
+tokenRingMLStatsLostFrameErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of lost frame errors reported in
+            error reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 19 }
+
+tokenRingMLStatsCongestionErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of receive congestion errors
+            reported in error reporting packets detected by
+            the probe."
+    ::= { tokenRingMLStatsEntry 20 }
+
+tokenRingMLStatsFrameCopiedErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frame copied errors reported
+            in error reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 21 }
+
+tokenRingMLStatsFrequencyErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frequency errors reported in
+            error reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 22 }
+
+tokenRingMLStatsTokenErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of token errors reported in
+            error reporting packets detected by the probe."
+    ::= { tokenRingMLStatsEntry 23 }
+
+tokenRingMLStatsSoftErrorReports OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of soft error report frames
+            detected by the probe."
+    ::= { tokenRingMLStatsEntry 24 }
+
+tokenRingMLStatsRingPollEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of ring poll events detected by
+            the probe (i.e. the number of ring polls initiated
+            by the active monitor that were detected)."
+    ::= { tokenRingMLStatsEntry 25 }
+
+tokenRingMLStatsOwner OBJECT-TYPE
+    SYNTAX OwnerString
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The entity that configured this entry and is
+            therefore using the resources assigned to it."
+    ::= { tokenRingMLStatsEntry 26 }
+
+tokenRingMLStatsStatus OBJECT-TYPE
+    SYNTAX EntryStatus
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The status of this tokenRingMLStats entry."
+    ::= { tokenRingMLStatsEntry 27 }
+
+-- The Token Ring Promiscuous Statistics Group
+--
+-- Implementation of this group is optional
+
+tokenRingPStatsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF TokenRingPStatsEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of promiscuous Token Ring statistics
+            entries."
+    ::= { statistics 3 }
+
+tokenRingPStatsEntry OBJECT-TYPE
+    SYNTAX TokenRingPStatsEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of promiscuous statistics kept for
+            non-MAC packets on a particular Token Ring
+            interface."
+    INDEX { tokenRingPStatsIndex }
+    ::= { tokenRingPStatsTable 1 }
+
+-- As an example, an instance of the
+-- tokenRingPStatsDataOctets object
+-- might be named tokenRingPStatsDataOctets.1
+
+TokenRingPStatsEntry ::= SEQUENCE {
+    tokenRingPStatsIndex                          INTEGER,
+    tokenRingPStatsDataSource               OBJECT IDENTIFIER,
+    tokenRingPStatsDropEvents                     Counter,
+    tokenRingPStatsDataOctets                     Counter,
+    tokenRingPStatsDataPkts                       Counter,
+    tokenRingPStatsDataBroadcastPkts              Counter,
+    tokenRingPStatsDataMulticastPkts              Counter,
+    tokenRingPStatsDataPkts18to63Octets           Counter,
+    tokenRingPStatsDataPkts64to127Octets          Counter,
+    tokenRingPStatsDataPkts128to255Octets         Counter,
+    tokenRingPStatsDataPkts256to511Octets         Counter,
+    tokenRingPStatsDataPkts512to1023Octets        Counter,
+    tokenRingPStatsDataPkts1024to2047Octets       Counter,
+    tokenRingPStatsDataPkts2048to4095Octets       Counter,
+    tokenRingPStatsDataPkts4096to8191Octets       Counter,
+    tokenRingPStatsDataPkts8192to18000Octets      Counter,
+    tokenRingPStatsDataPktsGreaterThan18000Octets Counter,
+    tokenRingPStatsOwner                          OwnerString,
+    tokenRingPStatsStatus                         EntryStatus
+
+}
+
+tokenRingPStatsIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies this
+            tokenRingPStats entry."
+    ::= { tokenRingPStatsEntry 1 }
+
+tokenRingPStatsDataSource OBJECT-TYPE
+    SYNTAX OBJECT IDENTIFIER
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "This object identifies the source of the data
+            that this tokenRingPStats entry is configured to
+            analyze.  This source can be any tokenRing
+            interface on this device.  In order to identify a
+            particular interface, this object shall identify
+            the instance of the ifIndex object, defined in
+            MIB-II [3], for the desired interface.  For
+            example, if an entry were to receive data from
+            interface #1, this object would be set to
+            ifIndex.1.
+
+            The statistics in this group reflect all non-MAC
+            packets on the local network segment attached to
+            the identified interface.
+
+            This object may not be modified if the associated
+            tokenRingPStatsStatus object is equal to
+            valid(1)."
+    ::= { tokenRingPStatsEntry 2 }
+
+tokenRingPStatsDropEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of events in which packets were
+            dropped by the probe due to lack of resources.
+            Note that this number is not necessarily the
+            number of packets dropped; it is just the number
+            of times this condition has been detected.  This
+            value is the same as the corresponding
+            tokenRingMLStatsDropEvents"
+    ::= { tokenRingPStatsEntry 3 }
+
+tokenRingPStatsDataOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of octets of data in good frames
+            received on the network (excluding framing bits
+            but including FCS octets) in non-MAC packets."
+    ::= { tokenRingPStatsEntry 4 }
+
+tokenRingPStatsDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of non-MAC packets in good
+            frames.  received."
+    ::= { tokenRingPStatsEntry 5 }
+
+tokenRingPStatsDataBroadcastPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were directed to an LLC broadcast address
+            (0xFFFFFFFFFFFF or 0xC000FFFFFFFF)."
+    ::= { tokenRingPStatsEntry 6 }
+
+tokenRingPStatsDataMulticastPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were directed to a local or global multicast
+            or functional address.  Note that this number does
+            not include packets directed to the broadcast
+            address."
+    ::= { tokenRingPStatsEntry 7 }
+
+tokenRingPStatsDataPkts18to63Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 18 and 63 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 8 }
+
+tokenRingPStatsDataPkts64to127Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 64 and 127 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 9 }
+
+tokenRingPStatsDataPkts128to255Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 128 and 255 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 10 }
+
+tokenRingPStatsDataPkts256to511Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 256 and 511 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 11 }
+
+tokenRingPStatsDataPkts512to1023Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 512 and 1023 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 12 }
+
+tokenRingPStatsDataPkts1024to2047Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 1024 and 2047 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 13 }
+
+tokenRingPStatsDataPkts2048to4095Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 2048 and 4095 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 14 }
+
+tokenRingPStatsDataPkts4096to8191Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 4096 and 8191 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 15 }
+
+tokenRingPStatsDataPkts8192to18000Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were between 8192 and 18000 octets in length
+            inclusive, excluding framing bits but including
+            FCS octets."
+    ::= { tokenRingPStatsEntry 16 }
+
+tokenRingPStatsDataPktsGreaterThan18000Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            that were greater than 18000 octets in length,
+            excluding framing bits but including FCS octets."
+    ::= { tokenRingPStatsEntry 17 }
+
+tokenRingPStatsOwner OBJECT-TYPE
+    SYNTAX OwnerString
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The entity that configured this entry and is
+            therefore using the resources assigned to it."
+    ::= { tokenRingPStatsEntry 18 }
+
+tokenRingPStatsStatus OBJECT-TYPE
+    SYNTAX EntryStatus
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The status of this tokenRingPStats entry."
+    ::= { tokenRingPStatsEntry 19 }
+
+-- The Token Ring History Groups
+
+-- When an entry in the historyControlTable is created that
+-- identifies a token ring interface as its
+-- historyControlDataSource, the probe shall create
+-- corresponding entries in the tokenRingMLHistoryTable
+-- and/or the tokenRingPHistoryTable, depending on which
+-- groups it supports.
+
+-- The Token Ring Mac-Layer History Group
+--
+-- Implementation of this group is optional.
+-- Implementation of this group requires implementation of
+-- the historyControl group from RFC1271.
+
+tokenRingMLHistoryTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF TokenRingMLHistoryEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of Mac-Layer Token Ring statistics
+
+            entries."
+    ::= { history 3 }
+
+tokenRingMLHistoryEntry OBJECT-TYPE
+    SYNTAX TokenRingMLHistoryEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of Mac-Layer statistics kept for a
+            particular Token Ring interface."
+    INDEX { tokenRingMLHistoryIndex,
+            tokenRingMLHistorySampleIndex }
+    ::= { tokenRingMLHistoryTable 1 }
+
+-- As an example, an instance of the
+-- tokenRingMLHistoryMacOctets
+-- object might be named tokenRingMLHistoryMacOctets.1.27
+
+TokenRingMLHistoryEntry ::= SEQUENCE {
+    tokenRingMLHistoryIndex                     INTEGER,
+    tokenRingMLHistorySampleIndex               INTEGER,
+    tokenRingMLHistoryIntervalStart             TimeTicks,
+    tokenRingMLHistoryDropEvents                Counter,
+    tokenRingMLHistoryMacOctets                 Counter,
+    tokenRingMLHistoryMacPkts                   Counter,
+    tokenRingMLHistoryRingPurgeEvents           Counter,
+    tokenRingMLHistoryRingPurgePkts             Counter,
+    tokenRingMLHistoryBeaconEvents              Counter,
+    tokenRingMLHistoryBeaconTime                TimeInterval,
+    tokenRingMLHistoryBeaconPkts                Counter,
+    tokenRingMLHistoryClaimTokenEvents          Counter,
+    tokenRingMLHistoryClaimTokenPkts            Counter,
+    tokenRingMLHistoryNAUNChanges               Counter,
+    tokenRingMLHistoryLineErrors                Counter,
+    tokenRingMLHistoryInternalErrors            Counter,
+    tokenRingMLHistoryBurstErrors               Counter,
+    tokenRingMLHistoryACErrors                  Counter,
+    tokenRingMLHistoryAbortErrors               Counter,
+    tokenRingMLHistoryLostFrameErrors           Counter,
+    tokenRingMLHistoryCongestionErrors          Counter,
+    tokenRingMLHistoryFrameCopiedErrors         Counter,
+    tokenRingMLHistoryFrequencyErrors           Counter,
+    tokenRingMLHistoryTokenErrors               Counter,
+    tokenRingMLHistorySoftErrorReports          Counter,
+    tokenRingMLHistoryRingPollEvents            Counter,
+    tokenRingMLHistoryActiveStations            INTEGER
+}
+
+tokenRingMLHistoryIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The history of which this entry is a part.  The
+            history identified by a particular value of this
+            index is the same history as identified by the
+            same value of historyControlIndex."
+    ::= { tokenRingMLHistoryEntry 1 }
+
+tokenRingMLHistorySampleIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "An index that uniquely identifies the particular
+            Mac-Layer sample this entry represents among all
+            Mac-Layer samples associated with the same
+            historyControlEntry.  This index starts at 1 and
+            increases by one as each new sample is taken."
+    ::= { tokenRingMLHistoryEntry 2 }
+
+tokenRingMLHistoryIntervalStart OBJECT-TYPE
+    SYNTAX TimeTicks
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of sysUpTime at the start of the
+            interval over which this sample was measured.  If
+            the probe keeps track of the time of day, it
+            should start the first sample of the history at a
+            time such that when the next hour of the day
+            begins, a sample is started at that instant.  Note
+            that following this rule may require the probe to
+            delay collecting the first sample of the history,
+            as each sample must be of the same interval.  Also
+            note that the sample which is currently being
+            collected is not accessible in this table until
+            the end of its interval."
+    ::= { tokenRingMLHistoryEntry 3 }
+
+tokenRingMLHistoryDropEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of events in which packets were
+
+            dropped by the probe due to lack of resources
+            during this sampling interval.  Note that this
+            number is not necessarily the number of packets
+            dropped, it is just the number of times this
+            condition has been detected."
+    ::= { tokenRingMLHistoryEntry 4 }
+
+tokenRingMLHistoryMacOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of octets of data in MAC packets
+            (excluding those that were not good frames)
+            received on the network during this sampling
+            interval (excluding framing bits but including FCS
+            octets)."
+    ::= { tokenRingMLHistoryEntry 5 }
+
+tokenRingMLHistoryMacPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of MAC packets (excluding those
+            that were not good frames) received during this
+            sampling interval."
+    ::= { tokenRingMLHistoryEntry 6 }
+
+tokenRingMLHistoryRingPurgeEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of times that the ring entered
+            the ring purge state from normal ring state during
+            this sampling interval.  The ring purge state that
+            comes from the claim token or beacon state is not
+            counted."
+    ::= { tokenRingMLHistoryEntry 7 }
+
+tokenRingMLHistoryRingPurgePkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of Ring Purge MAC packets
+            detected by the probe during this sampling
+
+            interval."
+    ::= { tokenRingMLHistoryEntry 8 }
+
+tokenRingMLHistoryBeaconEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of times that the ring enters a
+            beaconing state (beaconFrameStreamingState,
+            beaconBitStreamingState,
+            beaconSetRecoveryModeState, or
+            beaconRingSignalLossState) during this sampling
+            interval.  Note that a change of the source
+            address of the beacon packet does not constitute a
+            new beacon event."
+    ::= { tokenRingMLHistoryEntry 9 }
+
+tokenRingMLHistoryBeaconTime OBJECT-TYPE
+    SYNTAX TimeInterval
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The amount of time that the ring has been in the
+            beaconing state during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 10 }
+
+tokenRingMLHistoryBeaconPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of beacon MAC packets detected
+            by the probe during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 11 }
+
+tokenRingMLHistoryClaimTokenEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of times that the ring enters
+            the claim token state from normal ring state or
+            ring purge state during this sampling interval.
+            The claim token state that comes from the beacon
+            state is not counted."
+    ::= { tokenRingMLHistoryEntry 12 }
+
+tokenRingMLHistoryClaimTokenPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of claim token MAC packets
+            detected by the probe during this sampling
+            interval."
+    ::= { tokenRingMLHistoryEntry 13 }
+
+tokenRingMLHistoryNAUNChanges OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of NAUN changes detected by the
+            probe during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 14 }
+
+tokenRingMLHistoryLineErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of line errors reported in error
+            reporting packets detected by the probe during
+            this sampling interval."
+    ::= { tokenRingMLHistoryEntry 15 }
+
+tokenRingMLHistoryInternalErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of adapter internal errors
+            reported in error reporting packets detected by
+            the probe during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 16 }
+
+tokenRingMLHistoryBurstErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of burst errors reported in
+            error reporting packets detected by the probe
+            during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 17 }
+
+tokenRingMLHistoryACErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of AC (Address Copied) errors
+            reported in error reporting packets detected by
+            the probe during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 18 }
+
+tokenRingMLHistoryAbortErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of abort delimiters reported in
+            error reporting packets detected by the probe
+            during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 19 }
+
+tokenRingMLHistoryLostFrameErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of lost frame errors reported in
+            error reporting packets detected by the probe
+            during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 20 }
+
+tokenRingMLHistoryCongestionErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of receive congestion errors
+            reported in error reporting packets detected by
+            the probe during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 21 }
+
+tokenRingMLHistoryFrameCopiedErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frame copied errors reported
+            in error reporting packets detected by the probe
+            during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 22 }
+
+tokenRingMLHistoryFrequencyErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frequency errors reported in
+            error reporting packets detected by the probe
+            during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 23 }
+
+tokenRingMLHistoryTokenErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of token errors reported in
+            error reporting packets detected by the probe
+            during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 24 }
+
+tokenRingMLHistorySoftErrorReports OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of soft error report frames
+            detected by the probe during this sampling
+            interval."
+    ::= { tokenRingMLHistoryEntry 25 }
+
+tokenRingMLHistoryRingPollEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of ring poll events detected by
+            the probe during this sampling interval."
+    ::= { tokenRingMLHistoryEntry 26 }
+
+tokenRingMLHistoryActiveStations OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The maximum number of active stations on the ring
+            detected by the probe during this sampling
+
+            interval."
+    ::= { tokenRingMLHistoryEntry 27}
+
+-- The Token Ring Promiscuous History Group
+--
+-- Implementation of this group is optional.
+-- Implementation of this group requires the implementation
+-- of the historyControl group from RFC1271.
+
+tokenRingPHistoryTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF TokenRingPHistoryEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of promiscuous Token Ring statistics
+            entries."
+    ::= { history 4 }
+
+tokenRingPHistoryEntry OBJECT-TYPE
+    SYNTAX TokenRingPHistoryEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of promiscuous statistics kept for a
+            particular Token Ring interface."
+    INDEX { tokenRingPHistoryIndex,
+            tokenRingPHistorySampleIndex }
+    ::= { tokenRingPHistoryTable 1 }
+
+-- As an example, an instance of the
+-- tokenRingPHistoryDataPkts object
+-- might be named tokenRingPHistoryDataPkts.1.27
+
+TokenRingPHistoryEntry ::= SEQUENCE {
+    tokenRingPHistoryIndex                          INTEGER,
+    tokenRingPHistorySampleIndex                    INTEGER,
+    tokenRingPHistoryIntervalStart                  TimeTicks,
+    tokenRingPHistoryDropEvents                     Counter,
+    tokenRingPHistoryDataOctets                     Counter,
+    tokenRingPHistoryDataPkts                       Counter,
+    tokenRingPHistoryDataBroadcastPkts              Counter,
+    tokenRingPHistoryDataMulticastPkts              Counter,
+    tokenRingPHistoryDataPkts18to63Octets           Counter,
+    tokenRingPHistoryDataPkts64to127Octets          Counter,
+    tokenRingPHistoryDataPkts128to255Octets         Counter,
+    tokenRingPHistoryDataPkts256to511Octets         Counter,
+    tokenRingPHistoryDataPkts512to1023Octets        Counter,
+    tokenRingPHistoryDataPkts1024to2047Octets       Counter,
+    tokenRingPHistoryDataPkts2048to4095Octets       Counter,
+    tokenRingPHistoryDataPkts4096to8191Octets       Counter,
+    tokenRingPHistoryDataPkts8192to18000Octets      Counter,
+    tokenRingPHistoryDataPktsGreaterThan18000Octets Counter
+}
+
+tokenRingPHistoryIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The history of which this entry is a part.  The
+            history identified by a particular value of this
+            index is the same history as identified by the
+            same value of historyControlIndex."
+    ::= { tokenRingPHistoryEntry 1 }
+
+tokenRingPHistorySampleIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "An index that uniquely identifies the particular
+            sample this entry represents among all samples
+            associated with the same historyControlEntry.
+            This index starts at 1 and increases by one as
+            each new sample is taken."
+    ::= { tokenRingPHistoryEntry 2 }
+
+tokenRingPHistoryIntervalStart OBJECT-TYPE
+    SYNTAX TimeTicks
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of sysUpTime at the start of the
+            interval over which this sample was measured.  If
+            the probe keeps track of the time of day, it
+            should start the first sample of the history at a
+            time such that when the next hour of the day
+            begins, a sample is started at that instant.  Note
+            that following this rule may require the probe to
+            delay collecting the first sample of the history,
+            as each sample must be of the same interval.  Also
+            note that the sample which is currently being
+            collected is not accessible in this table until
+            the end of its interval."
+    ::= { tokenRingPHistoryEntry 3 }
+
+tokenRingPHistoryDropEvents OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of events in which packets were
+            dropped by the probe due to lack of resources
+            during this sampling interval.  Note that this
+            number is not necessarily the number of packets
+            dropped, it is just the number of times this
+            condition has been detected."
+    ::= { tokenRingPHistoryEntry 4 }
+
+tokenRingPHistoryDataOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of octets of data in good frames
+            received on the network (excluding framing bits
+            but including FCS octets) in non-MAC packets
+            during this sampling interval."
+    ::= { tokenRingPHistoryEntry 5 }
+
+tokenRingPHistoryDataPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval."
+    ::= { tokenRingPHistoryEntry 6 }
+
+tokenRingPHistoryDataBroadcastPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were directed
+            to an LLC broadcast address (0xFFFFFFFFFFFF or
+            0xC000FFFFFFFF)."
+    ::= { tokenRingPHistoryEntry 7 }
+
+tokenRingPHistoryDataMulticastPkts OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were directed
+            to a local or global multicast or functional
+            address.  Note that this number does not include
+            packets directed to the broadcast address."
+    ::= { tokenRingPHistoryEntry 8 }
+
+tokenRingPHistoryDataPkts18to63Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between 18
+            and 63 octets in length inclusive, excluding
+            framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 9 }
+
+tokenRingPHistoryDataPkts64to127Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between 64
+            and 127 octets in length inclusive, excluding
+            framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 10 }
+
+tokenRingPHistoryDataPkts128to255Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+            128 and 255 octets in length inclusive, excluding
+            framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 11 }
+
+tokenRingPHistoryDataPkts256to511Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+
+            256 and 511 octets in length inclusive, excluding
+            framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 12 }
+
+tokenRingPHistoryDataPkts512to1023Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+            512 and 1023 octets in length inclusive, excluding
+            framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 13 }
+
+tokenRingPHistoryDataPkts1024to2047Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+            1024 and 2047 octets in length inclusive,
+            excluding framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 14 }
+
+tokenRingPHistoryDataPkts2048to4095Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+            2048 and 4095 octets in length inclusive,
+            excluding framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 15 }
+
+tokenRingPHistoryDataPkts4096to8191Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+            4096 and 8191 octets in length inclusive,
+            excluding framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 16 }
+
+tokenRingPHistoryDataPkts8192to18000Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were between
+            8192 and 18000 octets in length inclusive,
+            excluding framing bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 17 }
+
+tokenRingPHistoryDataPktsGreaterThan18000Octets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good non-MAC frames received
+            during this sampling interval that were greater
+            than 18000 octets in length, excluding framing
+            bits but including FCS octets."
+    ::= { tokenRingPHistoryEntry 18 }
+
+-- The Token Ring Ring Station Group
+--
+-- Implementation of this group is optional
+--
+-- Although the ringStationTable stores entries only for
+-- those stations physically attached to the local ring and
+-- the number of stations attached to a ring is limited, a
+-- probe may still need to free resources when resources
+-- grow tight.  In such a situation, it is suggested that
+-- the probe free only inactive stations, and to
+-- first free the stations that have been inactive for the
+-- longest time.
+
+ringStationControlTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RingStationControlEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of ringStation table control entries."
+    ::= { tokenRing 1 }
+
+ringStationControlEntry OBJECT-TYPE
+    SYNTAX RingStationControlEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of parameters that set up the discovery of
+            stations on a particular interface and the
+            collection of statistics about these stations."
+    INDEX { ringStationControlIfIndex }
+    ::= { ringStationControlTable 1 }
+
+-- As an example, an instance of the
+-- ringStationControlIfIndex object
+-- might be named ringStationControlIfIndex.1
+
+RingStationControlEntry ::= SEQUENCE {
+    ringStationControlIfIndex          INTEGER,
+    ringStationControlTableSize        INTEGER,
+    ringStationControlActiveStations   INTEGER,
+    ringStationControlRingState        INTEGER,
+    ringStationControlBeaconSender     MacAddress,
+    ringStationControlBeaconNAUN       MacAddress,
+    ringStationControlActiveMonitor    MacAddress,
+    ringStationControlOrderChanges     Counter,
+    ringStationControlOwner            OwnerString,
+    ringStationControlStatus           EntryStatus
+}
+
+ringStationControlIfIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies the
+            interface on this remote network monitoring device
+            from which ringStation data is collected.  The
+            interface identified by a particular value of this
+            object is the same interface as identified by the
+            same value of the ifIndex object, defined in MIB-
+            II [3]."
+    ::= { ringStationControlEntry 1 }
+
+ringStationControlTableSize OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The number of ringStationEntries in the
+            ringStationTable associated with this
+            ringStationControlEntry."
+    ::= { ringStationControlEntry 2 }
+
+ringStationControlActiveStations OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The number of active ringStationEntries in the
+            ringStationTable associated with this
+            ringStationControlEntry."
+    ::= { ringStationControlEntry 3 }
+
+ringStationControlRingState OBJECT-TYPE
+    SYNTAX INTEGER {
+        normalOperation(1),
+        ringPurgeState(2),
+        claimTokenState(3),
+        beaconFrameStreamingState(4),
+        beaconBitStreamingState(5),
+        beaconRingSignalLossState(6),
+        beaconSetRecoveryModeState(7)
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The current status of this ring."
+    ::= { ringStationControlEntry 4 }
+
+ringStationControlBeaconSender OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The address of the sender of the last beacon
+            frame received by the probe on this ring.  If no
+            beacon frames have been received, this object
+            shall be equal to six octets of zero."
+    ::= { ringStationControlEntry 5 }
+
+ringStationControlBeaconNAUN OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The address of the NAUN in the last beacon frame
+            received by the probe on this ring.  If no beacon
+            frames have been received, this object shall be
+            equal to six octets of zero."
+    ::= { ringStationControlEntry 6 }
+
+ringStationControlActiveMonitor OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The address of the Active Monitor on this
+            segment.  If this address is unknown, this object
+            shall be equal to six octets of zero."
+    ::= { ringStationControlEntry 7 }
+
+ringStationControlOrderChanges OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The number of add and delete events in the
+            ringStationOrderTable optionally associated with
+            this ringStationControlEntry."
+    ::= { ringStationControlEntry 8 }
+
+ringStationControlOwner OBJECT-TYPE
+    SYNTAX OwnerString
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The entity that configured this entry and is
+            therefore using the resources assigned to it."
+    ::= { ringStationControlEntry 9 }
+
+ringStationControlStatus OBJECT-TYPE
+    SYNTAX EntryStatus
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The status of this ringStationControl entry.
+
+            If this object is not equal to valid(1), all
+            associated entries in the ringStationTable shall
+            be deleted by the agent."
+    ::= { ringStationControlEntry 10 }
+
+ringStationTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RingStationEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of ring station entries.  An entry will
+            exist for each station that is now or has
+
+            previously been detected as physically present on
+            this ring."
+     ::= { tokenRing 2 }
+
+ringStationEntry OBJECT-TYPE
+    SYNTAX RingStationEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of statistics for a particular
+            station that has been discovered on a ring
+            monitored by this device."
+    INDEX { ringStationIfIndex, ringStationMacAddress }
+    ::= { ringStationTable 1 }
+
+-- As an example, an instance of the
+-- ringStationStationStatus object might be named
+-- ringStationStationStatus.1.16.0.90.0.64.131
+
+RingStationEntry ::= SEQUENCE {
+    ringStationIfIndex                INTEGER,
+    ringStationMacAddress             MacAddress,
+    ringStationLastNAUN               MacAddress,
+    ringStationStationStatus          INTEGER,
+    ringStationLastEnterTime          TimeTicks,
+    ringStationLastExitTime           TimeTicks,
+    ringStationDuplicateAddresses     Counter,
+    ringStationInLineErrors           Counter,
+    ringStationOutLineErrors          Counter,
+    ringStationInternalErrors         Counter,
+    ringStationInBurstErrors          Counter,
+    ringStationOutBurstErrors         Counter,
+    ringStationACErrors               Counter,
+    ringStationAbortErrors            Counter,
+    ringStationLostFrameErrors        Counter,
+    ringStationCongestionErrors       Counter,
+    ringStationFrameCopiedErrors      Counter,
+    ringStationFrequencyErrors        Counter,
+    ringStationTokenErrors            Counter,
+    ringStationInBeaconErrors         Counter,
+    ringStationOutBeaconErrors        Counter,
+    ringStationInsertions             Counter
+}
+
+ringStationIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies the
+            interface on this remote network monitoring device
+            on which this station was detected.  The interface
+            identified by a particular value of this object is
+            the same interface as identified by the same value
+            of the ifIndex object, defined in MIB-II [3]."
+    ::= { ringStationEntry 1 }
+
+ringStationMacAddress OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The physical address of this station."
+    ::= { ringStationEntry 2 }
+
+ringStationLastNAUN OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The physical address of last known NAUN of this
+            station."
+    ::= { ringStationEntry 3 }
+
+ringStationStationStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+        active(1),    -- actively participating in ring poll.
+        inactive(2),  -- Not participating in ring poll
+        forcedRemoval(3) -- Forced off ring by network
+                         -- management.
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The status of this station on the ring."
+    ::= { ringStationEntry 4 }
+
+ringStationLastEnterTime OBJECT-TYPE
+    SYNTAX TimeTicks
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of sysUpTime at the time this station
+            last entered the ring.  If the time is unknown,
+            this value shall be zero."
+    ::= { ringStationEntry 5 }
+
+ringStationLastExitTime OBJECT-TYPE
+    SYNTAX TimeTicks
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of sysUpTime at the time the probe
+            detected that this station last exited the ring.
+            If the time is unknown, this value shall be zero."
+    ::= { ringStationEntry 6 }
+
+ringStationDuplicateAddresses OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The number of times this station experienced a
+            duplicate address error."
+    ::= { ringStationEntry 7 }
+
+ringStationInLineErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of line errors reported by this
+            station in error reporting packets detected by the
+            probe."
+    ::= { ringStationEntry 8 }
+
+ringStationOutLineErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of line errors reported in error
+            reporting packets sent by the nearest active
+            downstream neighbor of this station and detected
+            by the probe."
+    ::= { ringStationEntry 9 }
+
+ringStationInternalErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of adapter internal errors
+            reported by this station in error reporting
+            packets detected by the probe."
+    ::= { ringStationEntry 10 }
+
+ringStationInBurstErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of burst errors reported by this
+            station in error reporting packets detected by the
+            probe."
+    ::= { ringStationEntry 11 }
+
+ringStationOutBurstErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of burst errors reported in
+            error reporting packets sent by the nearest active
+            downstream neighbor of this station and detected
+            by the probe."
+    ::= { ringStationEntry 12 }
+
+ringStationACErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of AC (Address Copied) errors
+            reported in error reporting packets sent by the
+            nearest active downstream neighbor of this station
+            and detected by the probe."
+    ::= { ringStationEntry 13 }
+
+ringStationAbortErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of abort delimiters reported by
+            this station in error reporting packets detected
+            by the probe."
+    ::= { ringStationEntry 14 }
+
+ringStationLostFrameErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of lost frame errors reported by
+            this station in error reporting packets detected
+            by the probe."
+    ::= { ringStationEntry 15 }
+
+ringStationCongestionErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of receive congestion errors
+            reported by this station in error reporting
+            packets detected by the probe."
+    ::= { ringStationEntry 16 }
+
+ringStationFrameCopiedErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frame copied errors reported
+            by this station in error reporting packets
+            detected by the probe."
+    ::= { ringStationEntry 17 }
+
+ringStationFrequencyErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frequency errors reported by
+            this station in error reporting packets detected
+            by the probe."
+    ::= { ringStationEntry 18 }
+
+ringStationTokenErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of token errors reported by this
+            station in error reporting frames detected by the
+            probe."
+    ::= { ringStationEntry 19 }
+
+ringStationInBeaconErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of beacon frames sent by this
+            station and detected by the probe."
+    ::= { ringStationEntry 20 }
+
+ringStationOutBeaconErrors OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of beacon frames detected by the
+            probe that name this station as the NAUN."
+    ::= { ringStationEntry 21 }
+
+ringStationInsertions OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The number of times the probe detected this
+            station inserting onto the ring."
+    ::= { ringStationEntry 22 }
+
+-- The Token Ring Ring Station Order Group
+--
+-- Implementation of this group is optional
+--
+
+-- The ringStationOrderTable
+
+ringStationOrderTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RingStationOrderEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of ring station entries for stations in
+            the ring poll, ordered by their ring-order."
+    ::= { tokenRing 3 }
+
+ringStationOrderEntry OBJECT-TYPE
+    SYNTAX RingStationOrderEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of statistics for a particular
+
+            station that is active on a ring monitored by this
+            device.  This table will contain information for
+            every interface that has a
+            ringStationControlStatus equal to valid."
+    INDEX { ringStationOrderIfIndex,
+            ringStationOrderOrderIndex }
+    ::= { ringStationOrderTable 1 }
+
+-- As an example, an instance of the
+-- ringStationOrderMacAddress object might be named
+-- ringStationOrderMacAddress.1.14
+
+RingStationOrderEntry ::= SEQUENCE {
+    ringStationOrderIfIndex             INTEGER,
+    ringStationOrderOrderIndex          INTEGER,
+    ringStationOrderMacAddress          MacAddress
+}
+
+ringStationOrderIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies the
+            interface on this remote network monitoring device
+            on which this station was detected.  The interface
+            identified by a particular value of this object is
+            the same interface as identified by the same value
+            of the ifIndex object, defined in MIB-II [3]."
+    ::= { ringStationOrderEntry 1 }
+
+ringStationOrderOrderIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "This index denotes the location of this station
+            with respect to other stations on the ring.  This
+            index is one more than the number of hops
+            downstream that this station is from the rmon
+            probe.  The rmon probe itself gets the value one."
+    ::= { ringStationOrderEntry 2 }
+
+ringStationOrderMacAddress OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The physical address of this station."
+    ::= { ringStationOrderEntry 3 }
+
+-- The Token Ring Ring Station Config Group
+--
+-- Implementation of this group is optional.
+-- The ring station config group manages token ring nodes
+-- through active means.
+
+ringStationConfigControlTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RingStationConfigControlEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of ring station configuration control
+            entries."
+    ::= { tokenRing 4 }
+
+ringStationConfigControlEntry OBJECT-TYPE
+    SYNTAX RingStationConfigControlEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "This entry controls active management of stations
+            by the probe.  One entry exists in this table for
+            each active station in the ringStationTable."
+    INDEX { ringStationConfigControlIfIndex,
+            ringStationConfigControlMacAddress }
+    ::= { ringStationConfigControlTable 1 }
+
+-- As an example, an instance of the
+-- ringStationConfigControlRemove object might be named
+-- ringStationConfigControlRemove.1.16.0.90.0.64.131
+
+RingStationConfigControlEntry ::= SEQUENCE {
+    ringStationConfigControlIfIndex         INTEGER,
+    ringStationConfigControlMacAddress      MacAddress,
+    ringStationConfigControlRemove          INTEGER,
+    ringStationConfigControlUpdateStats     INTEGER
+}
+
+ringStationConfigControlIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies the
+
+            interface on this remote network monitoring device
+            on which this station was detected.  The interface
+            identified by a particular value of this object is
+            the same interface as identified by the same value
+            of the ifIndex object, defined in MIB-II [3]."
+    ::= { ringStationConfigControlEntry 1 }
+
+ringStationConfigControlMacAddress OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The physical address of this station."
+    ::= { ringStationConfigControlEntry 2 }
+
+ringStationConfigControlRemove OBJECT-TYPE
+    SYNTAX INTEGER {
+        stable(1),
+        removing(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "Setting this object to `removing(2)' causes a
+            Remove Station MAC frame to be sent.  The agent
+            will set this object to `stable(1)' after
+            processing the request."
+    ::= { ringStationConfigControlEntry 3 }
+
+ringStationConfigControlUpdateStats OBJECT-TYPE
+    SYNTAX INTEGER {
+        stable(1),
+        updating(2)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "Setting this object to `updating(2)' causes the
+            configuration information associate with this
+            entry to be updated.  The agent will set this
+            object to `stable(1)' after processing the
+            request."
+    ::= { ringStationConfigControlEntry 4 }
+
+--  The ringStationConfig Table
+--
+--  Entries exist in this table after an active
+--  configuration query has completed successfully for
+--  a station.  This query is initiated by the associated
+--  ringStationConfigControlUpdateStats variable.
+
+ringStationConfigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RingStationConfigEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of configuration entries for stations on a
+            ring monitored by this probe."
+    ::= { tokenRing 5 }
+
+ringStationConfigEntry OBJECT-TYPE
+    SYNTAX RingStationConfigEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of statistics for a particular
+            station that has been discovered on a ring
+            monitored by this probe."
+    INDEX { ringStationConfigIfIndex,
+            ringStationConfigMacAddress }
+    ::= { ringStationConfigTable 1 }
+
+-- As an example, an instance of the
+-- ringStationConfigLocation object might be named
+-- ringStationConfigLocation.1.16.0.90.0.64.131
+
+RingStationConfigEntry ::= SEQUENCE {
+    ringStationConfigIfIndex            INTEGER,
+    ringStationConfigMacAddress         MacAddress,
+    ringStationConfigUpdateTime         TimeTicks,
+    ringStationConfigLocation           OCTET STRING,
+    ringStationConfigMicrocode          OCTET STRING,
+    ringStationConfigGroupAddress       OCTET STRING,
+    ringStationConfigFunctionalAddress  OCTET STRING
+}
+
+ringStationConfigIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies the
+
+            interface on this remote network monitoring device
+            on which this station was detected.  The interface
+            identified by a particular value of this object is
+            the same interface as identified by the same value
+            of the ifIndex object, defined in MIB-II [3]."
+    ::= { ringStationConfigEntry 1 }
+
+ringStationConfigMacAddress OBJECT-TYPE
+    SYNTAX MacAddress
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The physical address of this station."
+    ::= { ringStationConfigEntry 2 }
+
+ringStationConfigUpdateTime OBJECT-TYPE
+    SYNTAX TimeTicks
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of sysUpTime at the time this
+            configuration information was last updated
+            (completely)."
+    ::= { ringStationConfigEntry 3 }
+
+ringStationConfigLocation OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE(4))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The assigned physical location of this station."
+    ::= { ringStationConfigEntry 4 }
+
+ringStationConfigMicrocode OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE(10))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The microcode EC level of this station."
+    ::= { ringStationConfigEntry 5 }
+
+ringStationConfigGroupAddress OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE(4))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The low-order 4 octets of the group address
+            recognized by this station."
+    ::= { ringStationConfigEntry 6 }
+
+ringStationConfigFunctionalAddress OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE(4))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "the functional addresses recognized by this
+            station."
+    ::= { ringStationConfigEntry 7 }
+
+-- The Token Ring Source Routing group
+--
+-- Implementation of this group is optional.
+-- The data in this group is collected from the source
+-- routing information potentially present in any token ring
+-- packet.  This information will be valid only in a pure
+-- source route bridging environment.  In a transparent
+-- bridging or a mixed bridging environment, this
+-- information may not be accurate.
+
+sourceRoutingStatsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF SourceRoutingStatsEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A list of source routing statistics entries."
+    ::= { tokenRing 6 }
+
+sourceRoutingStatsEntry OBJECT-TYPE
+    SYNTAX SourceRoutingStatsEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+            "A collection of source routing statistics kept
+            for a particular Token Ring interface."
+    INDEX { sourceRoutingStatsIfIndex }
+    ::= { sourceRoutingStatsTable 1 }
+
+-- As an example, an instance of the
+-- sourceRoutingStatsInFrames object might be named
+-- sourceRoutingStatsInFrames.1
+
+SourceRoutingStatsEntry ::= SEQUENCE {
+    sourceRoutingStatsIfIndex                     INTEGER,
+    sourceRoutingStatsRingNumber                  INTEGER,
+    sourceRoutingStatsInFrames                    Counter,
+        -- in to our net
+
+    sourceRoutingStatsOutFrames                   Counter,
+        -- out from our net
+
+    sourceRoutingStatsThroughFrames               Counter,
+        -- through our net
+
+    sourceRoutingStatsAllRoutesBroadcastFrames    Counter,
+    sourceRoutingStatsSingleRouteBroadcastFrames  Counter,
+    sourceRoutingStatsInOctets                    Counter,
+    sourceRoutingStatsOutOctets                   Counter,
+    sourceRoutingStatsThroughOctets               Counter,
+    sourceRoutingStatsAllRoutesBroadcastOctets    Counter,
+    sourceRoutingStatsSingleRoutesBroadcastOctets Counter,
+    sourceRoutingStatsLocalLLCFrames              Counter,
+    sourceRoutingStats1HopFrames                  Counter,
+    sourceRoutingStats2HopsFrames                 Counter,
+    sourceRoutingStats3HopsFrames                 Counter,
+    sourceRoutingStats4HopsFrames                 Counter,
+    sourceRoutingStats5HopsFrames                 Counter,
+    sourceRoutingStats6HopsFrames                 Counter,
+    sourceRoutingStats7HopsFrames                 Counter,
+    sourceRoutingStats8HopsFrames                 Counter,
+    sourceRoutingStatsMoreThan8HopsFrames         Counter,
+    sourceRoutingStatsOwner                       OwnerString,
+    sourceRoutingStatsStatus                      EntryStatus
+}
+
+sourceRoutingStatsIfIndex OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The value of this object uniquely identifies the
+            interface on this remote network monitoring device
+            on which source routing statistics will be
+            detected.  The interface identified by a
+            particular value of this object is the same
+            interface as identified by the same value of the
+            ifIndex object, defined in MIB-II [3]."
+    ::= { sourceRoutingStatsEntry 1 }
+
+sourceRoutingStatsRingNumber OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The ring number of the ring monitored by this
+            entry.  When any object in this entry is created,
+            the probe will attempt to discover the ring
+            number.  Only after the ring number is discovered
+            will this object be created.  After creating an
+            object in this entry, the management station
+            should poll this object to detect when it is
+            created.  Only after this object is created can
+            the management station set the
+            sourceRoutingStatsStatus entry to valid(1)."
+    ::= { sourceRoutingStatsEntry 2 }
+
+sourceRoutingStatsInFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The count of frames sent into this ring from
+            another ring."
+    ::= { sourceRoutingStatsEntry 3 }
+
+sourceRoutingStatsOutFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The count of frames sent from this ring to
+            another ring."
+    ::= { sourceRoutingStatsEntry 4 }
+
+sourceRoutingStatsThroughFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The count of frames sent from another ring,
+            through this ring, to another ring."
+    ::= { sourceRoutingStatsEntry 5 }
+
+sourceRoutingStatsAllRoutesBroadcastFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good frames received that
+            were All Routes Broadcast."
+    ::= { sourceRoutingStatsEntry 6 }
+
+sourceRoutingStatsSingleRouteBroadcastFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of good frames received that
+            were Single Route Broadcast."
+    ::= { sourceRoutingStatsEntry 7 }
+
+sourceRoutingStatsInOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The count of octets in good frames sent into this
+            ring from another ring."
+    ::= { sourceRoutingStatsEntry 8 }
+
+sourceRoutingStatsOutOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The count of octets in good frames sent from this
+            ring to another ring."
+    ::= { sourceRoutingStatsEntry 9 }
+
+sourceRoutingStatsThroughOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The count of octets in good frames sent another
+            ring, through this ring, to another ring."
+    ::= { sourceRoutingStatsEntry 10 }
+
+sourceRoutingStatsAllRoutesBroadcastOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of octets in good frames
+            received that were All Routes Broadcast."
+    ::= { sourceRoutingStatsEntry 11 }
+
+sourceRoutingStatsSingleRoutesBroadcastOctets OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of octets in good frames
+            received that were Single Route Broadcast."
+    ::= { sourceRoutingStatsEntry 12 }
+
+sourceRoutingStatsLocalLLCFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received who had no
+            RIF field (or had a RIF field that only included
+            the local ring's number) and were not All Route
+            Broadcast Frames."
+    ::= { sourceRoutingStatsEntry 13 }
+
+sourceRoutingStats1HopFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 1 hop, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 14 }
+
+sourceRoutingStats2HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 2 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 15 }
+
+sourceRoutingStats3HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 3 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 16 }
+
+sourceRoutingStats4HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 4 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 17 }
+
+sourceRoutingStats5HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 5 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 18 }
+
+sourceRoutingStats6HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 6 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 19 }
+
+sourceRoutingStats7HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 7 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 20 }
+
+sourceRoutingStats8HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had 8 hops, were not All Route Broadcast Frames,
+            and whose source or destination were on this ring
+            (i.e. frames that had a RIF field and had this
+            ring number in the first or last entry of the RIF
+            field)."
+    ::= { sourceRoutingStatsEntry 21 }
+
+sourceRoutingStatsMoreThan8HopsFrames OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+            "The total number of frames received whose route
+            had more than 8 hops, were not All Route Broadcast
+            Frames, and whose source or destination were on
+            this ring (i.e. frames that had a RIF field and
+            had this ring number in the first or last entry of
+            the RIF field)."
+    ::= { sourceRoutingStatsEntry 22 }
+
+sourceRoutingStatsOwner OBJECT-TYPE
+    SYNTAX OwnerString
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The entity that configured this entry and is
+            therefore using the resources assigned to it."
+    ::= { sourceRoutingStatsEntry 23 }
+
+sourceRoutingStatsStatus OBJECT-TYPE
+    SYNTAX EntryStatus
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+            "The status of this sourceRoutingStats entry."
+    ::= { sourceRoutingStatsEntry 24 }
+
+END
diff --git a/snmp_builder/mibs/TOKENRING-MIB.mib b/snmp_builder/mibs/TOKENRING-MIB.mib
new file mode 100644
index 0000000..c97d826
--- /dev/null
+++ b/snmp_builder/mibs/TOKENRING-MIB.mib
@@ -0,0 +1,836 @@
+TOKENRING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+    Counter32, Integer32                 FROM SNMPv2-SMI
+    transmission                         FROM RFC1213-MIB
+    MacAddress,TimeStamp                 FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF;
+
+dot5 MODULE-IDENTITY
+    LAST-UPDATED "9410231150Z"
+    ORGANIZATION "IETF Interfaces MIB Working Group"
+    CONTACT-INFO
+            "        Keith McCloghrie
+
+             Postal: cisco Systems, Inc.
+                     170 West Tasman Drive,
+                     San Jose, CA 95134-1706
+
+                     US
+
+              Phone: +1 408 526 5260
+              EMail: kzm@cisco.com"
+    DESCRIPTION
+        "The MIB module for IEEE Token Ring entities."
+    ::= { transmission 9 }
+
+--              The 802.5 Interface Table
+
+-- This table contains state and parameter information which
+-- is specific to 802.5 interfaces.  It is mandatory that
+-- systems having 802.5 interfaces implement this table in
+-- addition to the ifTable (see RFCs 1213 and 1573).
+
+dot5Table       OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot5Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains Token Ring interface
+            parameters and state variables, one entry
+            per 802.5 interface."
+    ::= { dot5 1 }
+
+dot5Entry       OBJECT-TYPE
+    SYNTAX      Dot5Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of Token Ring status and parameter
+             values for an 802.5 interface."
+    INDEX       { dot5IfIndex }
+    ::= { dot5Table 1 }
+
+Dot5Entry ::= SEQUENCE {
+     dot5IfIndex              Integer32,
+     dot5Commands             INTEGER,
+     dot5RingStatus           INTEGER,
+     dot5RingState            INTEGER,
+     dot5RingOpenStatus       INTEGER,
+     dot5RingSpeed            INTEGER,
+     dot5UpStream             MacAddress,
+     dot5ActMonParticipate    INTEGER,
+     dot5Functional           MacAddress,
+     dot5LastBeaconSent       TimeStamp
+}
+
+dot5IfIndex     OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of this object identifies the
+             802.5 interface for which this entry
+             contains management information.  The
+             value of this object for a particular
+             interface has the same value as the
+             ifIndex object, defined in MIB-II for
+             the same interface."
+    ::= { dot5Entry 1 }
+
+dot5Commands    OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    noop(1),
+                    open(2),
+                    reset(3),
+                    close(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "When this object is set to the value of
+             open(2), the station should go into the
+             open state.  The progress and success of
+             the open is given by the values of the
+             objects dot5RingState and
+             dot5RingOpenStatus.
+                 When this object is set to the value
+             of reset(3), then the station should do
+             a reset.  On a reset, all MIB counters
+             should retain their values, if possible.
+             Other side affects are dependent on the
+             hardware chip set.
+                 When this object is set to the value
+             of close(4), the station should go into
+             the stopped state by removing itself
+             from the ring.
+                 Setting this object to a value of
+             noop(1) has no effect.
+                 When read, this object always has a
+             value of noop(1).
+                 The open(2) and close(4) values
+             correspond to the up(1) and down(2) values
+             of MIB-II's ifAdminStatus and ifOperStatus,
+             i.e., the setting of ifAdminStatus and
+
+             dot5Commands affects the values of both
+             dot5Commands and ifOperStatus."
+    ::= { dot5Entry 2 }
+
+dot5RingStatus  OBJECT-TYPE
+    SYNTAX      INTEGER (0..262143)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current interface status which can
+            be used to diagnose fluctuating problems
+            that can occur on token rings, after a
+            station has successfully been added to
+            the ring.
+               Before an open is completed, this
+            object has the value for the 'no status'
+            condition.  The dot5RingState and
+            dot5RingOpenStatus objects provide for
+            debugging problems when the station
+            can not even enter the ring.
+                The object's value is a sum of
+            values, one for each currently applicable
+            condition.  The following values are
+            defined for various conditions:
+
+                    0 = No Problems detected
+                   32 = Ring Recovery
+                   64 = Single Station
+                  256 = Remove Received
+                  512 = reserved
+                 1024 = Auto-Removal Error
+                 2048 = Lobe Wire Fault
+                 4096 = Transmit Beacon
+                 8192 = Soft Error
+                16384 = Hard Error
+                32768 = Signal Loss
+               131072 = no status, open not completed."
+    ::= { dot5Entry 3 }
+
+dot5RingState   OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    opened(1),
+                    closed(2),
+                    opening(3),
+                    closing(4),
+                    openFailure(5),
+                    ringFailure(6)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current interface state with respect
+            to entering or leaving the ring."
+    ::= { dot5Entry 4 }
+
+dot5RingOpenStatus  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    noOpen(1),     -- no open attempted
+                    badParam(2),
+                    lobeFailed(3),
+                    signalLoss(4),
+                    insertionTimeout(5),
+                    ringFailed(6),
+                    beaconing(7),
+                    duplicateMAC(8),
+                    requestFailed(9),
+                    removeReceived(10),
+                    open(11)      -- last open successful
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object indicates the success, or the
+            reason for failure, of the station's most
+            recent attempt to enter the ring."
+    ::= { dot5Entry 5 }
+
+dot5RingSpeed   OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    oneMegabit(2),
+                    fourMegabit(3),
+                    sixteenMegabit(4)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The ring-speed at the next insertion into
+            the ring.  Note that this may or may not be
+            different to the current ring-speed which is
+            given by MIB-II's ifSpeed.  For interfaces
+            which do not support changing ring-speed,
+            dot5RingSpeed can only be set to its current
+            value.  When dot5RingSpeed has the value
+            unknown(1), the ring's actual ring-speed is
+            to be used."
+    ::= { dot5Entry 6 }
+
+dot5UpStream    OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The MAC-address of the up stream neighbor
+             station in the ring."
+    ::= { dot5Entry 7 }
+
+dot5ActMonParticipate OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    true(1),
+                    false(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "If this object has a value of true(1) then
+            this interface will participate in the
+            active monitor selection process.  If the
+            value is false(2) then it will not.
+            Setting this object does not take effect
+            until the next Active Monitor election, and
+            might not take effect until the next time
+            the interface is opened."
+    ::= { dot5Entry 8 }
+
+dot5Functional  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The bit mask of all Token Ring functional
+            addresses for which this interface will
+            accept frames."
+    ::= { dot5Entry 9 }
+
+dot5LastBeaconSent OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of MIB-II's sysUpTime object at which
+            the local system last transmitted a Beacon frame
+            on this interface."
+    ::= { dot5Entry 10 }
+
+--   The 802.5 Statistics Table
+
+-- This table contains statistics and error counter which are
+-- specific to 802.5 interfaces.  It is mandatory that systems
+-- having 802.5 interfaces implement this table.
+
+dot5StatsTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot5StatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table containing Token Ring statistics,
+            one entry per 802.5 interface.
+                All the statistics are defined using
+            the syntax Counter32 as 32-bit wrap around
+            counters.  Thus, if an interface's
+            hardware maintains these statistics in
+            16-bit counters, then the agent must read
+            the hardware's counters frequently enough
+            to prevent loss of significance, in order
+            to maintain 32-bit counters in software."
+    ::= { dot5 2 }
+
+dot5StatsEntry  OBJECT-TYPE
+    SYNTAX      Dot5StatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry contains the 802.5 statistics
+             for a particular interface."
+    INDEX       { dot5StatsIfIndex }
+    ::= { dot5StatsTable 1 }
+
+Dot5StatsEntry ::= SEQUENCE {
+     dot5StatsIfIndex              Integer32,
+     dot5StatsLineErrors           Counter32,
+     dot5StatsBurstErrors          Counter32,
+     dot5StatsACErrors             Counter32,
+     dot5StatsAbortTransErrors     Counter32,
+     dot5StatsInternalErrors       Counter32,
+     dot5StatsLostFrameErrors      Counter32,
+     dot5StatsReceiveCongestions   Counter32,
+     dot5StatsFrameCopiedErrors    Counter32,
+     dot5StatsTokenErrors          Counter32,
+     dot5StatsSoftErrors           Counter32,
+     dot5StatsHardErrors           Counter32,
+     dot5StatsSignalLoss           Counter32,
+     dot5StatsTransmitBeacons      Counter32,
+     dot5StatsRecoverys            Counter32,
+     dot5StatsLobeWires            Counter32,
+     dot5StatsRemoves              Counter32,
+     dot5StatsSingles              Counter32,
+     dot5StatsFreqErrors           Counter32
+}
+
+dot5StatsIfIndex  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of this object identifies the
+            802.5 interface for which this entry
+            contains management information.  The
+            value of this object for a particular
+            interface has the same value as MIB-II's
+            ifIndex object for the same interface."
+    ::= { dot5StatsEntry 1 }
+
+dot5StatsLineErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a frame
+            or token is copied or repeated by a
+            station, the E bit is zero in the frame
+            or token and one of the following
+            conditions exists: 1) there is a
+            non-data bit (J or K bit) between the SD
+            and the ED of the frame or token, or
+            2) there is an FCS error in the frame."
+    ::= { dot5StatsEntry 2 }
+
+dot5StatsBurstErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            detects the absence of transitions for five
+            half-bit timers (burst-five error)."
+    ::= { dot5StatsEntry 3 }
+
+dot5StatsACErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            receives an AMP or SMP frame in which A is
+            equal to C is equal to 0, and then receives
+            another SMP frame with A is equal to C is
+            equal to 0 without first receiving an AMP
+            frame. It denotes a station that cannot set
+            the AC bits properly."
+    ::= { dot5StatsEntry 4 }
+
+dot5StatsAbortTransErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            transmits an abort delimiter while
+            transmitting."
+    ::= { dot5StatsEntry 5 }
+
+dot5StatsInternalErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            recognizes an internal error."
+    ::= { dot5StatsEntry 6 }
+
+dot5StatsLostFrameErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            is transmitting and its TRR timer expires.
+            This condition denotes a condition where a
+            transmitting station in strip mode does not
+            receive the trailer of the frame before the
+            TRR timer goes off."
+    ::= { dot5StatsEntry 7 }
+
+dot5StatsReceiveCongestions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            recognizes a frame addressed to its
+            specific address, but has no available
+            buffer space indicating that the station
+            is congested."
+    ::= { dot5StatsEntry 8 }
+
+dot5StatsFrameCopiedErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            recognizes a frame addressed to its
+            specific address and detects that the FS
+            field A bits are set to 1 indicating a
+            possible line hit or duplicate address."
+    ::= { dot5StatsEntry 9 }
+
+dot5StatsTokenErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This counter is incremented when a station
+            acting as the active monitor recognizes an
+            error condition that needs a token
+            transmitted."
+    ::= { dot5StatsEntry 10 }
+
+dot5StatsSoftErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of Soft Errors the interface
+            has detected. It directly corresponds to
+            the number of Report Error MAC frames
+            that this interface has transmitted.
+            Soft Errors are those which are
+            recoverable by the MAC layer protocols."
+    ::= { dot5StatsEntry 11 }
+
+dot5StatsHardErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times this interface has
+            detected an immediately recoverable
+            fatal error.  It denotes the number of
+            times this interface is either
+            transmitting or receiving beacon MAC
+            frames."
+    ::= { dot5StatsEntry 12 }
+
+dot5StatsSignalLoss OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times this interface has
+            detected the loss of signal condition from
+            the ring."
+    ::= { dot5StatsEntry 13 }
+
+dot5StatsTransmitBeacons OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times this interface has
+            transmitted a beacon frame."
+    ::= { dot5StatsEntry 14 }
+
+dot5StatsRecoverys OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of Claim Token MAC frames
+            received or transmitted after the interface
+            has received a Ring Purge MAC frame.  This
+            counter signifies the number of times the
+            ring has been purged and is being recovered
+            back into a normal operating state."
+    ::= { dot5StatsEntry 15 }
+
+dot5StatsLobeWires OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times the interface has
+            detected an open or short circuit in the
+            lobe data path.  The adapter will be closed
+            and dot5RingState will signify this
+            condition."
+    ::= { dot5StatsEntry 16 }
+
+dot5StatsRemoves OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times the interface has
+            received a Remove Ring Station MAC frame
+            request.  When this frame is received
+            the interface will enter the close state
+            and dot5RingState will signify this
+            condition."
+    ::= { dot5StatsEntry 17 }
+
+dot5StatsSingles OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times the interface has
+            sensed that it is the only station on the
+            ring.  This will happen if the interface
+            is the first one up on a ring, or if
+            there is a hardware problem."
+    ::= { dot5StatsEntry 18 }
+
+dot5StatsFreqErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of times the interface has
+            detected that the frequency of the
+            incoming signal differs from the expected
+            frequency by more than that specified by
+            the IEEE 802.5 standard."
+    ::= { dot5StatsEntry 19 }
+
+-- The Timer Table
+
+-- This group contains the values of timers for 802.5
+-- interfaces.  This table is obsolete, but its definition
+-- is retained here for backwards compatibility.
+
+dot5TimerTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot5TimerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      obsolete
+    DESCRIPTION
+            "This table contains Token Ring interface
+            timer values, one entry per 802.5
+            interface."
+    ::= { dot5 5 }
+
+dot5TimerEntry  OBJECT-TYPE
+    SYNTAX      Dot5TimerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      obsolete
+    DESCRIPTION
+            "A list of Token Ring timer values for an
+            802.5 interface."
+    INDEX       { dot5TimerIfIndex }
+    ::= { dot5TimerTable 1 }
+
+Dot5TimerEntry ::= SEQUENCE {
+    dot5TimerIfIndex          Integer32,
+    dot5TimerReturnRepeat     Integer32,
+    dot5TimerHolding          Integer32,
+    dot5TimerQueuePDU         Integer32,
+    dot5TimerValidTransmit    Integer32,
+    dot5TimerNoToken          Integer32,
+    dot5TimerActiveMon        Integer32,
+    dot5TimerStandbyMon       Integer32,
+    dot5TimerErrorReport      Integer32,
+    dot5TimerBeaconTransmit   Integer32,
+    dot5TimerBeaconReceive    Integer32
+}
+
+dot5TimerIfIndex  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The value of this object identifies the
+             802.5 interface for which this entry
+             contains timer values.  The value of
+
+             this object for a particular interface
+             has the same value as MIB-II's ifIndex
+             object for the same interface."
+    ::= { dot5TimerEntry 1 }
+
+dot5TimerReturnRepeat  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value used to ensure the
+            interface will return to Repeat State, in
+            units of 100 micro-seconds.  The value
+            should be greater than the maximum ring
+            latency."
+    ::= { dot5TimerEntry 2 }
+
+dot5TimerHolding  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "Maximum period of time a station is
+            permitted to transmit frames after capturing
+            a token, in units of 100 micro-seconds."
+    ::= { dot5TimerEntry 3 }
+
+dot5TimerQueuePDU  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value for enqueuing of an SMP
+            PDU after reception of an AMP or SMP
+            frame in which the A and C bits were
+            equal to 0, in units of 100
+            micro-seconds."
+    ::= { dot5TimerEntry 4 }
+
+dot5TimerValidTransmit OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value used by the active
+            monitor to detect the absence of valid
+            transmissions, in units of 100
+            micro-seconds."
+    ::= { dot5TimerEntry 5 }
+
+dot5TimerNoToken  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value used to recover from
+            various-related error situations.
+            If N is the maximum number of stations on
+            the ring, the value of this timer is
+            normally:
+            dot5TimerReturnRepeat + N*dot5TimerHolding."
+    ::= { dot5TimerEntry 6 }
+
+dot5TimerActiveMon  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value used by the active
+            monitor to stimulate the enqueuing of an
+            AMP PDU for transmission, in units of
+            100 micro-seconds."
+    ::= { dot5TimerEntry 7 }
+
+dot5TimerStandbyMon  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value used by the stand-by
+            monitors to ensure that there is an active
+            monitor on the ring and to detect a
+            continuous stream of tokens, in units of
+            100 micro-seconds."
+    ::= { dot5TimerEntry 8 }
+
+dot5TimerErrorReport  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value which determines how
+            often a station shall send a Report Error
+            MAC frame to report its error counters,
+            in units of 100 micro-seconds."
+    ::= { dot5TimerEntry 9 }
+
+dot5TimerBeaconTransmit  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value which determines how
+            long a station shall remain in the state
+            of transmitting Beacon frames before
+            entering the Bypass state, in units of
+            100 micro-seconds."
+    ::= { dot5TimerEntry 10 }
+
+dot5TimerBeaconReceive  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The time-out value which determines how
+            long a station shall receive Beacon
+            frames from its downstream neighbor
+            before entering the Bypass state, in
+            units of 100 micro-seconds."
+    ::= { dot5TimerEntry 11 }
+
+--                802.5 Interface Tests
+
+dot5Tests   OBJECT IDENTIFIER ::= { dot5 3 }
+
+-- RFC 1573 defines the ifTestTable, through which a
+-- network manager can instruct an agent to test an interface
+-- for various faults.  A test to be performed is identified
+-- as an OBJECT IDENTIFIER.
+
+-- The Insert Function test
+
+dot5TestInsertFunc  OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+        "Invoking this test causes the station to test the insert
+        ring logic of the hardware if the station's lobe media
+        cable is connected to a wiring concentrator.  Note that
+        this command inserts the station into the network, and
+        thus, could cause problems if the station is connected
+        to a operational network."
+    ::= { dot5Tests 1 }
+
+-- The Full-Duplex Loop Back test
+
+dot5TestFullDuplexLoopBack OBJECT-IDENTITY
+    STATUS       current
+    DESCRIPTION
+        "Invoking this test on a 802.5 interface causes the
+        interface to check the path from memory through the
+        chip set's internal logic and back to memory, thus
+        checking the proper functioning of the system's
+        interface to the chip set."
+    ::= { dot5Tests 2 }
+
+--              802.5 Hardware Chip Sets
+
+-- RFC 1229 specified an object, ifExtnsChipSet, with the
+-- syntax of OBJECT IDENTIFIER, to identify the hardware
+-- chip set in use by an interface.  RFC 1573 obsoletes
+-- the use of ifExtnsChipSet.  However, the following
+-- definitions are retained for backwards compatibility.
+
+dot5ChipSets   OBJECT IDENTIFIER ::= { dot5 4 }
+
+dot5ChipSetIBM16  OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "IBM's 16/4 Mbs chip set."
+    ::= { dot5ChipSets 1 }
+
+dot5ChipSetTItms380 OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "Texas Instruments' TMS 380 4Mbs chip-set"
+    ::= { dot5ChipSets 2 }
+
+dot5ChipSetTItms380c16 OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION
+        "Texas Instruments' TMS 380C16 16/4 Mbs chip-set"
+    ::= { dot5ChipSets 3 }
+
+-- conformance information
+
+dot5Conformance OBJECT IDENTIFIER ::= { dot5 6 }
+
+dot5Groups      OBJECT IDENTIFIER ::= { dot5Conformance 1 }
+dot5Compliances OBJECT IDENTIFIER ::= { dot5Conformance 2 }
+
+-- compliance statements
+
+dot5Compliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for SNMPv2 entities
+        which implement the IEEE 802.5 MIB."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { dot5StateGroup, dot5StatsGroup }
+
+        OBJECT     dot5ActMonParticipate
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT     dot5Functional
+        MIN-ACCESS read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { dot5Compliances 1 }
+
+-- units of conformance
+
+dot5StateGroup  OBJECT-GROUP
+    OBJECTS   { dot5Commands, dot5RingStatus, dot5RingState,
+                dot5RingOpenStatus, dot5RingSpeed, dot5UpStream,
+                dot5ActMonParticipate, dot5Functional,
+                dot5LastBeaconSent
+              }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing state information
+        and parameters for IEEE 802.5 interfaces."
+    ::= { dot5Groups 1 }
+
+dot5StatsGroup  OBJECT-GROUP
+    OBJECTS   { dot5StatsLineErrors, dot5StatsBurstErrors,
+                dot5StatsACErrors, dot5StatsAbortTransErrors,
+                dot5StatsInternalErrors, dot5StatsLostFrameErrors,
+                dot5StatsReceiveCongestions,
+                dot5StatsFrameCopiedErrors, dot5StatsTokenErrors,
+                dot5StatsSoftErrors, dot5StatsHardErrors,
+                dot5StatsSignalLoss, dot5StatsTransmitBeacons,
+                dot5StatsRecoverys, dot5StatsLobeWires,
+                dot5StatsRemoves, dot5StatsSingles,
+                dot5StatsFreqErrors
+              }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing statistics for
+        IEEE 802.5 interfaces."
+    ::= { dot5Groups 2 }
+
+END
diff --git a/snmp_builder/mibs/TOKENRING-STATION-SR-MIB.mib b/snmp_builder/mibs/TOKENRING-STATION-SR-MIB.mib
new file mode 100644
index 0000000..76430f0
--- /dev/null
+++ b/snmp_builder/mibs/TOKENRING-STATION-SR-MIB.mib
@@ -0,0 +1,175 @@
+TOKENRING-STATION-SR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE
+                                         FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, RowStatus, MacAddress
+                                         FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF
+    mib-2, ifIndex                       FROM RFC1213-MIB;
+
+dot5SrMIB MODULE-IDENTITY
+    LAST-UPDATED "9412161000Z"
+    ORGANIZATION "IETF Interfaces MIB Working Group"
+    CONTACT-INFO
+            "       Keith McCloghrie
+            Postal: Cisco Systems, Inc.
+                    170 West Tasman Drive
+                    San Jose, CA  95134-1706
+                    US
+
+             Phone: +1 408 526 5260
+             Email: kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module for managing source routes in
+            end-stations on IEEE 802.5 Token Ring networks."
+    ::= { mib-2 42 }
+
+dot5SrMIBObjects OBJECT IDENTIFIER ::= { dot5SrMIB 1 }
+
+SourceRoute ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS       current
+    DESCRIPTION
+                 "Represents a Source Route, containing an
+                 embedded sequence of bridge and ring ID's,
+                 as used by 802.5 Source Routing."
+    REFERENCE    "Annex C of ISO/IEC 10038: 1993,
+                 [ANSI/IEEE Std 802.1D, 1993]"
+    SYNTAX       OCTET STRING (SIZE(0..30))
+
+--           The 802.5 Station Source Route Table
+--
+
+dot5SrRouteTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot5SrRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+               "The table of source-routing routes.
+               This represents the 802.5 RIF database."
+    ::= { dot5SrMIBObjects 1 }
+
+dot5SrRouteEntry  OBJECT-TYPE
+    SYNTAX      Dot5SrRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+                "Information on a specific route.
+
+                An entry is created whenever a 'Single Path
+                Explorer' or an 'All Paths Explorer' discovers
+                a route to a neighbor not currently in the table,
+                or whenever an 'All Paths Explorer' discovers a
+                better (e.g., shorter) route than the route currently
+                stored in the table.  This is done on behalf of
+                any network layer client.
+
+                The ifIndex value in the INDEX clause refers to
+                the value of MIB-II's ifIndex object for the
+                interface on which the route is in effect."
+    INDEX  { ifIndex, dot5SrRouteDestination }
+    ::= { dot5SrRouteTable 1 }
+
+Dot5SrRouteEntry ::= SEQUENCE {
+
+    dot5SrRouteDestination   MacAddress,
+    dot5SrRouteControl       OCTET STRING,
+    dot5SrRouteDescr         SourceRoute,
+    dot5SrRouteStatus        RowStatus
+}
+
+dot5SrRouteDestination  OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+               "The destination of this route."
+    ::= { dot5SrRouteEntry 2 }
+
+dot5SrRouteControl  OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(2))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+               "The value of Routing Control field for this
+               route."
+    REFERENCE  "Annex C of ISO/IEC 10038: 1993,
+               [ANSI/IEEE Std 802.1D, 1993]"
+    ::= { dot5SrRouteEntry 3 }
+
+dot5SrRouteDescr  OBJECT-TYPE
+    SYNTAX      SourceRoute
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+               "The embedded sequence of bridge and ring ID's
+               for this route.  For destinations on the
+               local ring, the value of this object is
+               the zero-length string."
+    REFERENCE  "Annex C of ISO/IEC 10038: 1993,
+               [ANSI/IEEE Std 802.1D, 1993]"
+    ::= { dot5SrRouteEntry 4 }
+
+dot5SrRouteStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+             "The status of this row.  Values of the instances
+             of dot5SrRouteControl and dot5SrRouteDescr can be
+             modified while the row's status is 'active."
+    ::= { dot5SrRouteEntry 5 }
+
+-- conformance information
+
+dot5SrConformance OBJECT IDENTIFIER ::= { dot5SrMIB 2 }
+
+dot5SrGroups      OBJECT IDENTIFIER ::= { dot5SrConformance 1 }
+dot5SrCompliances OBJECT IDENTIFIER ::= { dot5SrConformance 2 }
+
+-- compliance statements
+
+dot5SrCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for SNMPv2 entities
+        which implement the IEEE 802.5 Station Source Route
+        MIB."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { dot5SrRouteGroup }
+
+        OBJECT      dot5SrRouteStatus
+        SYNTAX      INTEGER { active(1) }   -- subset of values
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only the 'active'
+            value need be supported."
+
+        OBJECT      dot5SrRouteControl
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      dot5SrRouteDescr
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { dot5SrCompliances 1 }
+
+-- units of conformance
+
+dot5SrRouteGroup  OBJECT-GROUP
+    OBJECTS   { dot5SrRouteControl,
+                dot5SrRouteDescr,
+                dot5SrRouteStatus
+              }
+    STATUS    current
+    DESCRIPTION
+        "A collection of objects providing for the management of
+        source routes in stations on IEEE 802.5 source-routing
+        networks."
+    ::= { dot5SrGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/TPM-MIB.mib b/snmp_builder/mibs/TPM-MIB.mib
new file mode 100644
index 0000000..989fd59
--- /dev/null
+++ b/snmp_builder/mibs/TPM-MIB.mib
@@ -0,0 +1,1916 @@
+TPM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Counter32, Unsigned32         FROM SNMPv2-SMI    --[RFC2578]
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP                  FROM SNMPv2-CONF   --[RFC2580]
+
+    SnmpAdminString               FROM SNMP-FRAMEWORK-MIB --[RFC3411]
+
+    RowStatus, TEXTUAL-CONVENTION, TimeStamp,
+    StorageType                   FROM SNMPv2-TC  --[RFC2579]
+
+    rmon, OwnerString             FROM RMON-MIB   --[RFC2819]
+
+    protocolDirLocalIndex,
+    ZeroBasedCounter32            FROM RMON2-MIB  --[RFC2021]
+
+    ZeroBasedCounter64            FROM HCNUM-TC  --[RFC2856]
+
+    AppLocalIndex, TransactionAggregationType,
+    RmonClientID, DataSourceOrZero,
+    apmAppDirAppLocalIndex, apmExceptionIndex,
+    apmReportGroup, apmExceptionGroup,
+    apmAppDirResponsivenessType   FROM APM-MIB   --[RFC3729]
+
+    SspmClockSource, SspmClockMaxSkew,
+    SspmMicroSeconds              FROM SSPM-MIB;  --[RFC4149]
+
+-- Transaction Performance Monitoring MIB
+
+tpmMIB MODULE-IDENTITY
+       LAST-UPDATED    "200507280000Z"  -- 28 July 2005
+       ORGANIZATION    "IETF RMON MIB Working Group"
+       CONTACT-INFO
+         "E-mail: rmonmib@ietf.org
+          Subscribe: rmonmib-request@ietf.org
+                     w/ msg body: subscribe rmonmib
+
+                  Russell Dietz
+                  Hifn, Inc.
+          Postal: 750 University Ave
+                  Los Gatos, CA 95032-7695
+
+                  USA
+             Tel: +1 408 399-3623
+             Fax: +1 408 399-3501
+          E-mail: rdietz@hifn.com
+
+                  Robert G. Cole
+                  Johns Hopkins University Applied Physics Laboratory
+          Postal: MP2-170
+                  11100 Johns Hopkins Road
+                  Laurel, MD 20723-6099
+                  USA
+             Tel: +1 443 778-6951
+          E-mail: robert.cole@jhuapl.edu"
+       DESCRIPTION
+          "This module defines extensions to the RMON2-MIB module
+          for the collection of Performance Metrics related to
+          application traffic in a network.  In particular,
+          it describes managed objects used for monitoring
+          selectable performance metrics and statistics
+          derived from the monitoring of network packets and
+          sub-application level transactions.
+
+          In order to maintain the RMON 'look-and-feel', some of
+          the text from the RMON2 [RFC2021] and HC-RMON [RFC3273]
+          MIBs by Steve Waldbusser have been used in this MIB module.
+
+          Copyright (C) The Internet Society (2005).  This version of
+          this MIB module is part of RFC 4150; see the RFC itself for
+          full legal notices."
+
+       REVISION        "200507280000Z"   -- 28 July 2005
+       DESCRIPTION
+           "The original version of this MIB module,
+           published as RFC 4150."
+       ::= { rmon 30 }
+
+--
+-- Object Identifier Assignments
+--
+
+tpmCapabilities         OBJECT IDENTIFIER ::= { tpmMIB 1 }
+tpmReports              OBJECT IDENTIFIER ::= { tpmMIB 2 }
+tpmConformance          OBJECT IDENTIFIER ::= { tpmMIB 3 }
+
+-- tpmAggrReportCntrlTable OBJECT IDENTIFIER ::= { tpmReports 1 }
+-- tpmAggrReportTable      OBJECT IDENTIFIER ::= { tpmReports 2 }
+-- tpmCurReportTable       OBJECT IDENTIFIER ::= { tpmReports 3 }
+-- tpmCurReportSize        OBJECT IDENTIFIER ::= { tpmReports 4 }
+
+-- tpmExcpReportTable      OBJECT IDENTIFIER ::= { tpmReports 5 }
+
+--
+-- Textual Conventions
+--
+
+TpmTransactionMetricIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "An index used to identify an entry in the
+        tpmTransMetricDir table uniquely.  Each such entry defines
+        the protocol transaction and metric instance to be
+        monitored for a specific application."
+    SYNTAX       Unsigned32 (1..65535)
+
+TpmMetricDefID ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "An index that identifies through reference to a specific
+        performance metrics.  The metrics are referenced
+        through their type (connect, delay, loss, etc.), their
+        directional characteristics (one-way, round trip, etc.),
+        their name, and their reference to a documented definition."
+    SYNTAX       Unsigned32 (1..2147483647)
+
+--
+-- The tpmCapabilitiesGroup
+--
+
+tpmClockResolution OBJECT-TYPE
+    SYNTAX      SspmMicroSeconds
+    MAX-ACCESS  read-only
+    STATUS      current
+    -- UNITS       Microseconds
+    DESCRIPTION
+        "A read-only variable indicating the resolution
+         of the measurements possible by this device."
+    ::= { tpmCapabilities 1 }
+
+tpmClockMaxSkew OBJECT-TYPE
+    SYNTAX      SspmClockMaxSkew
+    MAX-ACCESS  read-only
+    STATUS      current
+    -- UNITS       Seconds
+    DESCRIPTION
+        "A read-only variable indicating the maximum
+
+         offset error due to skew of the local clock
+         over the time interval 86400 seconds, in seconds."
+    ::= { tpmCapabilities 2 }
+
+tpmClockSource OBJECT-TYPE
+    SYNTAX      SspmClockSource
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A read-only variable indicating the source of the clock.
+         This is provided to allow a user to determine how accurate
+         the timing mechanism is compared with other devices."
+    ::= { tpmCapabilities 3 }
+
+tpmTransMetricDirLastChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time the
+        tpmTransMetricDirTable was last modified, through
+        modifications of the tpmTransMetricDirConfig object."
+    ::= { tpmCapabilities 4 }
+
+tpmTransMetricDirTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TpmTransMetricDirEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table is used to describe and link sets of
+        performance metrics and protocols to an entry in
+        the application directory.  This table, with the
+        tpmMetricDefTable, describes the capability of
+        the agent to collection sub-application level
+        data related to each entry in the
+        apmAppDirectoryTable.
+
+        This table lists the protocol transactions and their
+        corresponding performance metrics that this agent
+        has the capability to compute and collect, for the specified
+        application.  There is one entry in this table for each such
+        application, protocol transaction, and metric combination
+        supported by this agent.  The entries in this
+        table represent the metrics that are collected for each
+        protocol transaction that comprise the application.
+        The agent should boot up with this table pre-configured
+        with those combinations of applications, protocol
+        transactions, and metrics that it knows about and wishes to
+
+        monitor.  Implementations must populate the table with all
+        possible application, protocol transaction, and metric
+        combinations and have the default configuration objects
+        set to supportedOff(2).  This table does not support the
+        creation of new combinations by the management application.
+
+        The deletion of an entry in the apmAppDirectoryTable will
+        cause the removal of entries from this table.  These entries
+        must be removed because the appLocalIndex value will no
+        longer be visible in the apmAppDirectoryTable.  When an entry
+        is created in the apmAppDirectoryTable and the agent has the
+        ability to support metrics for these protocol transactions,
+        the appropriate entries must be made in the
+        tpmTransMetricDefTable."
+    ::= { tpmCapabilities 5 }
+
+tpmTransMetricDirEntry OBJECT-TYPE
+    SYNTAX      TpmTransMetricDirEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the tpmTransMetricDirTable.
+
+        An example of the indexing of this entry is
+        tpmTransMetricDirConfig.5.2  where 5 is the
+        value of a valid and visible appLocalIndex object
+        in the appLocalDir table.  The entries describe
+        the transaction and metric pairs monitored for this
+        application.  The tpmTransMetricProtocolIndex
+        identifies the protocol transaction and the
+        tpmMetricDefIndex describes the metric monitored."
+    INDEX { tpmTransMetricAppLocalIndex, -- Application Index
+            tpmTransMetricIndex    -- (Protocol,Metric) Index
+          }
+    ::= { tpmTransMetricDirTable 1 }
+
+TpmTransMetricDirEntry ::= SEQUENCE {
+    tpmTransMetricAppLocalIndex   AppLocalIndex,
+    tpmTransMetricIndex           TpmTransactionMetricIndex,
+    tpmTransMetricProtocolIndex   Unsigned32,
+    tpmTransMetricMetricIndex     Unsigned32,
+    tpmTransMetricDirConfig       INTEGER
+}
+
+tpmTransMetricAppLocalIndex OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index used to uniquely identify the application
+        with which the entries in the tpmTransMetricDir
+        table are associated."
+    ::= { tpmTransMetricDirEntry 1 }
+
+tpmTransMetricIndex OBJECT-TYPE
+    SYNTAX      TpmTransactionMetricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index used to uniquely identify an entry in the
+        tpmTransMetricDir table.  Each such entry defines
+        protocol transaction and metric instance
+        to be monitored for a specific application."
+    ::= { tpmTransMetricDirEntry 2 }
+
+tpmTransMetricProtocolIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocolDirLocalIndex of the particular transaction to
+        be analyzed when computing and generating the selected metric
+        for a specific application."
+    ::= { tpmTransMetricDirEntry 3 }
+
+tpmTransMetricMetricIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The tpmMetricDefinitionID of the particular metric to be
+        generated."
+    ::= { tpmTransMetricDirEntry 4 }
+
+tpmTransMetricDirConfig OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(1),
+                    supportedOff(2),
+                    supportedOn(3)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object describes and configures the probe's support
+        for this performance metric in relationship to the
+        specified transaction and application.  The agent
+
+        creates entries in this table for all metric
+        and transaction combinations that it can generate.  Because
+        the probe will only populate this table with supported
+        entries, and the table cannot have entries added, the
+        notSupported(1) setting is only used to signify that other
+        configuration parameters are causing the agent currently not
+        to support the generation and collection of this metric for
+        the specified protocol and application.  Also, the status of
+        this object will not change to notSupported(1) due to a
+        change to supportedOff(2) in the tpmMetricDir table.
+
+        If the value of this object is notSupported(1), the probe
+        will not perform computations for this performance metric and
+        transaction combination and will not allow this object to be
+        changed to any other value.  If the value of this object is
+        supportedOn(3), the probe supports computations for this
+        performance metric and protocol and is configured to perform
+        the computations for this performance metric and protocol
+        combination for the application for all interfaces.
+        If the value of this object is supportedOff(2), the
+        probe supports computations for this performance
+        metric for the specified protocol, but is configured
+        not to perform the computations for this performance
+        metric and protocol for the application for any
+        interfaces.  Whenever this value changes from
+        supportedOn(3) to supportedOff(2), the probe shall
+        cause the deletion of all entries in the tpmReportGroup
+        tables, for all appropriate studies configured in the
+        tpmAggrReportCntrlTable.
+
+        The value of this object must persist across reboots."
+    ::= { tpmTransMetricDirEntry 5 }
+
+--
+-- TPM Metric Definitions Table
+--
+
+tpmMetricDefTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TpmMetricDefEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The tpmMetricDefTable describes the metrics
+        available to the TPM-MIB.  The tpmMetricDefTable
+        can define metrics by referencing existing IETF,
+        ITU, and other standards organizations' documents,
+        including enterprise-specific documents.
+
+        Examples of appropriate references include the
+        ITU-T Recommendation Y.1540 [Y.1540] on IP
+        packet transfer performance metrics and the
+        IETF documents from the IPPM WG; e.g., RFC2681
+        on the round trip delay metric [RFC2681] or
+        RFC3393 on the delay variation metric [RFC3393].
+        Other examples include RFC2679 [RFC2679], RFC2680
+        [RFC2680], and RFC3432 [RFC3432].  Although no
+        specific metric is mandatory, implementations
+        should, at a minimum, support a round-trip delay
+        and a round-trip loss metric.
+
+        This table contains one row per metric supported by this
+        agent, and it should be populated during system
+        initialization."
+    ::= { tpmCapabilities 6 }
+
+tpmMetricDefEntry OBJECT-TYPE
+    SYNTAX      TpmMetricDefEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a particular metric."
+    INDEX   { tpmMetricDefinitionID }
+    ::= { tpmMetricDefTable 1 }
+
+TpmMetricDefEntry ::= SEQUENCE {
+      tpmMetricDefinitionID              TpmMetricDefID,
+      tpmMetricDefType                   INTEGER,
+      tpmMetricDefDirType                INTEGER,
+      tpmMetricDefName                   SnmpAdminString,
+      tpmMetricDefReference              SnmpAdminString,
+      tpmMetricDefGlobalID               OBJECT IDENTIFIER
+}
+
+tpmMetricDefinitionID     OBJECT-TYPE
+    SYNTAX      TpmMetricDefID
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index for this entry.  This object identifies
+         the particular metric in this MIB module."
+    ::= { tpmMetricDefEntry 1 }
+
+tpmMetricDefType   OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                          other(1),
+                          connectMetric(2),
+                          delayMetric(3),
+                          lossMetric(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The basic type of metric indicated by this entry.
+
+        The value 'other(1)' indicates that this metric cannot be
+        characterized by any of the remaining enumerations specified
+        for this object.
+
+        The value 'connectMetric(2)' indicates that this metric
+        measures connectivity characteristics.
+
+        The value 'delayMetric(3)' indicates that this metric
+        measures delay characteristics.
+
+        The value 'lossMetric(4)' indicates that this metric
+        measures loss characteristics."
+    ::= { tpmMetricDefEntry 2 }
+
+tpmMetricDefDirType   OBJECT-TYPE
+    SYNTAX      INTEGER  {
+                          oneWay(1),
+                          twoWay(2),
+                          multiWay(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The directional characteristics of the this metric.
+
+        The value 'oneWay(1)' indicates that this metric is measured
+        with some sort of unidirectional test.
+
+        The value 'twoWay(2)' indicates that this metric is measured
+        with some sort of bidirectional test.
+
+        The value 'multiWay(3)' indicates that this metric is
+        measured with some combination of unidirectional and/or
+        bidirectional tests."
+    ::= { tpmMetricDefEntry 3 }
+
+tpmMetricDefName OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The textual name of this metric.  For example, if
+        this tpmMetricDefEntry identified the IPPM metric for
+        round trip delay, then this object should contain
+        the value, e.g., 'Type-P-Round-Trip-Delay'."
+    ::= { tpmMetricDefEntry 4 }
+
+tpmMetricDefReference OBJECT-TYPE
+    SYNTAX      SnmpAdminString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a reference to the document that
+        defines this metric.  If this document is available online
+        via electronic download, then a de-referencable URL
+        should be specified in this object.  The implementation
+        must support an HTTP URL type and may support additional
+        types of de-referencable URLs such as an FTP type.
+
+        For example, if this tpmMetricDefName identified the IPPM
+        metric 'Type-P-Round-Trip-Delay', then this object should
+        contain the value, e.g.,
+        'http://www.ietf.org/rfc/rfc2681.txt'."
+    ::= { tpmMetricDefEntry 5 }
+
+tpmMetricDefGlobalID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a reference to the Object ID
+        in a metrics registration MIB being developed
+        in the IPPM WG at the IETF; e.g., the
+        IPPM-REGISTRY-MIB [RFC4148], which defines the metric.
+        In the event that this metric has no corresponding
+        object identifier (OID) or until the IPPM-REGISTRY-MIB is
+        defined, then the value should be set to 0.0 for none."
+    ::= { tpmMetricDefEntry 6 }
+
+--
+-- The tpmAggregateReportsGroup
+--
+
+tpmAggrReportCntrlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TpmAggrReportCntrlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The tpmAggrReportCntrlTable is the controlling entry
+        that manages the population of studies in the Transport
+        Aggregate Report for selected interfaces, metrics, and
+        transaction protocols and applications.
+
+        Note that this is not like the typical RMON
+        controlTable and dataTable in which each entry creates
+        its own data table.  Each entry in this table enables the
+        creation of multiple data tables on a study basis.  For each
+        interval, the study is updated in place, and the current
+        data content of the table becomes invalid.
+
+        The control table entries are persistent across
+        system reboots."
+    ::= { tpmReports 1 }
+
+tpmAggrReportCntrlEntry OBJECT-TYPE
+    SYNTAX      TpmAggrReportCntrlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the tpmAggrReportCntrlTable.
+
+        An example of the indexing of this entry is
+        tpmAggrReportCntrlDataSource.1"
+    INDEX { tpmAggrReportCntrlIndex }
+    ::= { tpmAggrReportCntrlTable 1 }
+
+TpmAggrReportCntrlEntry ::= SEQUENCE {
+    tpmAggrReportCntrlIndex               Unsigned32,
+    tpmAggrReportCntrlApmCntrlIndex       Unsigned32,
+    tpmAggrReportCntrlDataSource          DataSourceOrZero,
+    tpmAggrReportCntrlAggrType            TransactionAggregationType,
+    tpmAggrReportCntrlInterval            Unsigned32,
+    tpmAggrReportCntrlReqSize             Unsigned32,
+    tpmAggrReportCntrlGrantedSize         Unsigned32,
+    tpmAggrReportCntrlReqReports          Unsigned32,
+    tpmAggrReportCntrlGrantedReports      Unsigned32,
+    tpmAggrReportCntrlStartTime           TimeStamp,
+    tpmAggrReportCntrlReportNumber        Unsigned32,
+    tpmAggrReportCntrlInsertsDenied       Counter32,
+    tpmAggrReportCntrlDroppedFrames       Counter32,
+    tpmAggrReportCntrlOwner               OwnerString,
+    tpmAggrReportCntrlStorageType         StorageType,
+    tpmAggrReportCntrlStatus              RowStatus
+}
+
+tpmAggrReportCntrlIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index that uniquely identifies an entry in the
+        tpmAggrReportCntrlTable.  Each such entry defines a unique
+        report whose results are placed in the tpmAggrReportTable on
+        behalf of this tpmAggrReportCntrlEntry."
+    ::= { tpmAggrReportCntrlEntry 1 }
+
+tpmAggrReportCntrlApmCntrlIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This index associates this TpmAggrReportCntrlEntry directly
+        with an existing ApmReportControlEntry.  This link is used
+        to synchronize reports in the associated tpmAggrReportTable.
+
+        A value of 0 (zero) enables an independent control table that
+        will report entries to tpmAggrReportTable based only on the
+        other objects in this table.
+
+        A non-zero value indicates that this row is defined through
+        the APM-MIB.  In this case, all row objects are set to their
+        corresponding values in the APM-MIB.  In the event that a
+        SET is issued to a row object, while the value of the
+        tpmAggrReportCntrlApmCntrlIndex is non-zero, the agent
+        MUST respond as if the object of the SET command
+        had MAX-ACCESS of read-only.
+
+        This object may not be modified if the associated
+        tpmAggrReportCntrlStatus object is equal to active(1)."
+    DEFVAL { 0 }
+    ::= { tpmAggrReportCntrlEntry 2 }
+
+tpmAggrReportCntrlDataSource OBJECT-TYPE
+    SYNTAX      DataSourceOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The source of the data for TPM Reports generated on
+        behalf of this tpmAggrReportCntrlEntry.
+
+        If the measurement is being performed by a probe, this should
+        be set to the interface or port where data was received for
+        analysis.  If the measurement isn't being performed by a
+        probe this should be set to the primary interface over which
+
+        the measurement is being performed.  If the measurement isn't
+        being performed by a probe and there is no primary interface,
+        or if this information isn't known, this object should be
+        set to 0.0.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object is set to the corresponding
+        apmReportControlTable object in the APM-MIB [RFC3729].
+
+        This object may not be modified if the associated
+        tpmAggrReportCntrlStatus object is equal to active(1)."
+    ::= { tpmAggrReportCntrlEntry 3 }
+
+tpmAggrReportCntrlAggrType OBJECT-TYPE
+    SYNTAX      TransactionAggregationType
+             -- INTEGER {
+             --    flows(1),
+             --    clients(2),
+             --    servers(3),
+             --    applications(4)
+             -- }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of aggregation being performed for this set of
+        reports.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+        of the apmReportControlAggregationType object.
+
+        This object may not be modified if the associated
+        tpmAggrReportCntrlStatus object is equal to active(1)."
+    ::= { tpmAggrReportCntrlEntry 4 }
+
+tpmAggrReportCntrlInterval OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The interval in seconds over which data is accumulated before
+        being aggregated into a report in the tpmAggrReportTable.
+        All reports with the same tpmAggrReportCntrlIndex will be
+        based on the same interval.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+
+        of the apmReportControlControlInterval object.
+
+        This object may not be modified if the associated
+        tpmReportAggregateCntrlStatus object is equal to active(1)."
+    DEFVAL { 3600 }
+    ::= { tpmAggrReportCntrlEntry 5 }
+
+tpmAggrReportCntrlReqSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of Client and Server combination
+        entries requested for this report.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+        of the apmReportControlRequestedSize object.
+
+        When this object is created or modified, the probe
+        should set tpmReportCntrlGrantedSize as closely to this
+        object as is possible for the particular probe
+        implementation and available resources.
+
+        It is important to note that this value is the number of
+        requested entries in the tpmAggrReportTable only.  Because
+        the probe can derive this table from the apmReportTable, the
+        probe must make sure that sufficient resources exist to
+        support the creation of the apmReportTable, plus any
+        additional resources required to convert or support this
+        table.
+
+        This object may not be modified if the associated
+        tpmReportAggregateCntrlStatus object is equal to active(1)."
+    ::= { tpmAggrReportCntrlEntry 6 }
+
+tpmAggrReportCntrlGrantedSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of performance entries in this report.
+
+        When the associated tpmAggrReportCntrlReqSize object is
+        created or modified, the probe should set this
+        object as closely to the requested value as is
+        possible for the particular implementation and
+        available resources.  The probe must not lower this
+
+        value except as a result of a set to the associated
+        tpmAggrReportCntrlReqSize object.
+
+        It is an implementation-specific matter as to whether
+        zero-valued entries are available."
+    ::= { tpmAggrReportCntrlEntry 7 }
+
+tpmAggrReportCntrlReqReports OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The number of saved reports requested to be allocated on
+        behalf of this entry.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+        of the apmReportControlcwRequestedReportsDataSource object.
+
+        This object may not be modified if the associated
+        tpmReportAggregateCntrlStatus object is equal to active(1)."
+    ::= { tpmAggrReportCntrlEntry 8 }
+
+tpmAggrReportCntrlGrantedReports OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of saved reports the agent has allocated based
+        on the requested amount in tpmAggrReportCntrlReqReports.
+        Because each report can have many entries, the total number
+        of entries allocated will be this number multiplied by the
+        value of tpmAggrReportCntrlGrantedSize, or by 1 if that
+        object doesn't exist.
+
+        When the associated tpmAggrReportCntrlReqReports object is
+        created or modified, the agent should set this object as
+        closely to the requested value as is possible for the
+        particular implementation and available resources.  When
+        considering available resources, the agent must consider its
+        ability to allocate this many reports, each with the number
+        of entries represented by tpmAggrReportCntrlGrantedSize, or
+        by 1 if that object doesn't exist.
+
+        Note that although the storage required for each report may
+        fluctuate due to changing conditions, the agent must continue
+        to have storage available to satisfy the full report size for
+        all reports, when necessary.  Further, the agent must not
+
+        lower this value except as a result of a set to the
+        associated tpmAggrReportCntrlReqSize object."
+    ::= { tpmAggrReportCntrlEntry 9 }
+
+tpmAggrReportCntrlStartTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime when the system began processing the
+        report in progress.  Note that the report in progress is not
+        available.
+
+        This object may be used by the management station to figure
+        out the start time for all previous reports saved for this
+        tpmAggrReportCntrlEntry, as reports are started at fixed
+        intervals.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object is set to the corresponding
+        apmReportControlTable object in the APM-MIB defined in
+        the IETF's RMONMIB WG."
+    ::= { tpmAggrReportCntrlEntry 10 }
+
+tpmAggrReportCntrlReportNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of the report in progress.  When an
+        tpmAggrReportCntrlEntry is activated, the first report will
+        be numbered zero.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+        of the apmReportControlReportNumber object."
+    ::= { tpmAggrReportCntrlEntry 11 }
+
+tpmAggrReportCntrlInsertsDenied OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of attempts to add an entry to reports for
+        this TpmAggrReportCntrlEntry that failed because the number
+        of entries would have exceeded tpmAggrReportCntrlGrantedSize.
+
+        This number is valuable in determining if enough entries have
+
+        been allocated for reports in light of fluctuating network
+        usage.  Note that an entry that is denied will often be
+        attempted again, so this number will not predict the exact
+        number of additional entries needed, but it can be used to
+        understand the relative magnitude of the problem.
+
+        Also note that there is no ordering specified for the entries
+        in the report; thus, there are no rules for which entries
+        will be omitted when not enough entries are available.  As a
+        consequence, the agent is not required to delete 'least
+        valuable' entries first."
+    ::= { tpmAggrReportCntrlEntry 12 }
+
+tpmAggrReportCntrlDroppedFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The total number of frames that were received by the agent
+        and therefore not accounted for in the *StatsDropEvents, but
+        for which the agent chose not to count for this entry for
+        whatever reason.  Most often, this event occurs when the
+        agent is out of some resources and decides to shed load from
+        this collection.
+
+        This count does not include packets that were not counted
+        because they had MAC-layer errors.
+
+        Note that if the alMatrixTables are not implemented or are
+        inactive because no protocols are enabled in the protocol
+        directory, this value should be 0.
+
+        Note that, unlike the dropEvents counter, this number is the
+        exact number of frames dropped."
+    ::= { tpmAggrReportCntrlEntry 13 }
+
+tpmAggrReportCntrlOwner OBJECT-TYPE
+    SYNTAX      OwnerString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The entity that configured this entry and is
+        therefore using the resources assigned to it.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+        of the apmReportControlReportNumber object.
+
+        This object may not be modified if the associated
+        tpmReportAggregateCntrlStatus object is equal to active(1)."
+    ::= { tpmAggrReportCntrlEntry 14 }
+
+tpmAggrReportCntrlStorageType OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The storage type of this tpmAggrReportCntrlEntry.  If the
+        value of this object is 'permanent', no objects in this row
+        need to be writable."
+    ::= { tpmAggrReportCntrlEntry 15 }
+
+tpmAggrReportCntrlStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The status of this performance control entry.
+
+        An entry may not exist in the active state unless each
+        object in the entry has an appropriate value.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object should be set by the agent to the value
+        of the apmReportControlReportNumber object.
+
+        Once this object is set to active(1), no objects in the
+        tpmAggrReportCntrlTable can be changed.
+
+        If this object is not equal to active(1), all associated
+        entries in the tpmAggrReportTable shall be deleted."
+    ::= { tpmAggrReportCntrlEntry 16 }
+
+--
+-- Transport Aggregate Report Table
+--
+
+tpmAggrReportTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TpmAggrReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains transport performance metric
+        studies for each of the control table entries in
+        tpmAggrReportCntrlTable.  These studies are
+
+        provided based on the selections and parameters
+        found for the entry in the
+        tpmAggregateReportCntrlTable.
+
+        The performance statistics are specified in the
+        tpmTransMetricDirTable associated with the
+        application in question and indexed by
+        appLocalIndex and tpmTransMetricIndex."
+    ::= { tpmReports 2 }
+
+tpmAggrReportEntry OBJECT-TYPE
+    SYNTAX      TpmAggrReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the tpmAggrReportTable.
+
+        The tpmAggrReportCntrlIndex value in the index identifies the
+        tpmAggrReportCntrlEntry on whose behalf this entry was
+        created.
+
+        The tpmAggrReportIndex value in the index identifies which
+        report (in the series of reports) this entry is a part of.
+
+        The tpmAggrReportAppLocalIndex value in the index identifies
+        the application protocol that is being reported.
+
+        The tpmTransMetricIndex value in the index identifies
+        the transaction protocol-metric pair for the traffic flows
+        aggregated in this entry.
+
+        The protocolDirLocalIndex value in the index identifies the
+        network layer protocol of the tpmAggrReportServerAddress.
+        When the associated tpmAggrReportCntrlAggrType value is equal
+        to applications(4) or clients(2), this value will equal 0.
+
+        The tpmAggrReportServerAddress value in the index identifies
+        the network layer address of the server in traffic flows
+        aggregated in this entry.
+
+        The tpmAggrReportApmNameClientID value in the index
+        identifies the client in traffic flows aggregated in this
+        entry.  If the associated tpmAggrReportCntrlAggrType is equal
+        to applications(4) or servers(3), then this object will be
+        set to 0.
+
+        An example of the indexing of this entry is
+        tpmAggrReportStatN.3.15.34.262.18.4.128.2.6.7.3256521"
+    INDEX { tpmAggrReportCntrlIndex,
+            tpmAggrReportIndex,
+            tpmAggrReportAppLocalIndex,       -- Application Layer
+            tpmAggrReportTransMetricIndex,    -- Metric and Protocol
+            protocolDirLocalIndex,            -- Network Layer
+            tpmAggrReportServerAddress,
+            tpmAggrReportApmNameClientID
+          }
+    ::= { tpmAggrReportTable 1 }
+
+TpmAggrReportEntry ::= SEQUENCE {
+    tpmAggrReportIndex                    Unsigned32,
+    tpmAggrReportAppLocalIndex            AppLocalIndex,
+    tpmAggrReportTransMetricIndex         TpmTransactionMetricIndex,
+    tpmAggrReportServerAddress            OCTET STRING,
+    tpmAggrReportApmNameClientID          RmonClientID,
+    tpmAggrReportStatN                    ZeroBasedCounter32,
+    tpmAggrReportOverflowStatN            ZeroBasedCounter32,
+    tpmAggrReportHCStatN                  ZeroBasedCounter64,
+    tpmAggrReportStatSumX                 ZeroBasedCounter32,
+    tpmAggrReportOverflowStatSumX         ZeroBasedCounter32,
+    tpmAggrReportHCStatSumX               ZeroBasedCounter64,
+    tpmAggrReportStatMaximum              ZeroBasedCounter32,
+    tpmAggrReportStatMinimum              ZeroBasedCounter32,
+    tpmAggrReportStatSumSq                ZeroBasedCounter32,
+    tpmAggrReportOverflowStatSumSq        ZeroBasedCounter32,
+    tpmAggrReportHCStatSumSq              ZeroBasedCounter64,
+    tpmAggrReportStatSumIX                ZeroBasedCounter32,
+    tpmAggrReportOverflowStatSumIX        ZeroBasedCounter32,
+    tpmAggrReportHCStatSumIX              ZeroBasedCounter64,
+    tpmAggrReportStatSumIXSq              ZeroBasedCounter32,
+    tpmAggrReportOverflowStatSumIXSq      ZeroBasedCounter32,
+    tpmAggrReportHCStatSumIXSq            ZeroBasedCounter64
+}
+
+tpmAggrReportIndex  OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The value of tpmAggrReportCntrlNumber for the report to
+        which this entry belongs."
+    ::= { tpmAggrReportEntry 1 }
+
+tpmAggrReportAppLocalIndex  OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The common application of the transactions aggregated
+        in this entry."
+    ::= { tpmAggrReportEntry 2 }
+
+tpmAggrReportTransMetricIndex OBJECT-TYPE
+    SYNTAX      TpmTransactionMetricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique index that identifies the transaction and
+        metric associated with the statistics reported here."
+    ::= { tpmAggrReportEntry 3 }
+
+tpmAggrReportServerAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..108))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network layer address of the server host in this
+        conversation.
+
+        This is represented as an octet string with specific
+        semantics and length as identified by the
+        protocolDirLocalIndex component of the index.
+
+        Because this object is an index variable, it is encoded in
+        the index according to the index encoding rules.  For
+        example, if the protocolDirLocalIndex indicates an
+        encapsulation of IPv4, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IPv4 address,
+        in network byte order.
+
+        If the associated tpmAggrReportCntrlAggrType is equal to
+        application(4) or client(2), then this object will be a null
+        string and will be encoded simply as a length octet of 0."
+    ::= { tpmAggrReportEntry 4 }
+
+tpmAggrReportApmNameClientID OBJECT-TYPE
+    SYNTAX      RmonClientID
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique ID assigned to the machine represented by this
+        mapping.  This ID is assigned by the agent using an
+        implementation-specific algorithm."
+    ::= { tpmAggrReportEntry 5 }
+
+tpmAggrReportStatN OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The count of the total number of data points for the
+        specified metric.  This number always represents the
+        total size of the statistical datum analyzed.  Each
+        metric specifies the exact meaning of this object.
+
+        This value represents the results for one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmAggrReportEntry 6 }
+
+tpmAggrReportOverflowStatN OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmAggrReportStatN counter has overflowed.  Note
+        that this object will only be instantiated if the
+        associated tpmAggrReportHCStatN object is also
+        instantiated for a particular dataSource."
+    ::= { tpmAggrReportEntry 7 }
+
+tpmAggrReportHCStatN OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmAggrReportStatN.
+        Note that this object will only be instantiated if the
+        agent supports high-capacity monitoring for a particular
+        dataSource."
+    ::= { tpmAggrReportEntry 8 }
+
+tpmAggrReportStatSumX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The sum of all the data point values for the specified
+        metric.  This number always represents the total values
+        of the statistical datum analyzed.  Each metric
+        specifies the exact meaning of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmAggrReportEntry 9 }
+
+tpmAggrReportOverflowStatSumX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmAggrReportStatSumX counter has overflowed.
+        Note that this object will only be instantiated if the
+        associated tpmAggrReportHCStatSumX object is also
+        instantiated for a particular dataSource."
+    ::= { tpmAggrReportEntry 10 }
+
+tpmAggrReportHCStatSumX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmAggrReportStatSumX.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmAggrReportEntry 11 }
+
+tpmAggrReportStatMaximum OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The single maximum data point value observed during the
+        study period for the specified metric.  This number always
+        represents the maximum value of any single statistical
+        datum analyzed.  Each metric specifies the exact meaning
+        of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmAggrReportEntry 12 }
+
+tpmAggrReportStatMinimum OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The single minimum data point value observed during the
+        study period for the specified metric.  This number always
+        represents the minimum value of any single statistical
+        datum analyzed.  Each metric specifies the exact meaning
+        of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmAggrReportEntry 13 }
+
+tpmAggrReportStatSumSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The sum of all the squared data point values for the
+        specified metric.  This number always represents the
+        total of the squared values of the statistical datum
+        analyzed.  Each metric specifies the exact meaning of
+        this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmAggrReportEntry 14 }
+
+tpmAggrReportOverflowStatSumSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmAggrReportStatSumSq counter has overflowed.
+        Note that this object will only  be instantiated if
+        the associated tpmAggrReportHCStatSumSq object
+        is also instantiated for a particular dataSource."
+    ::= { tpmAggrReportEntry 15 }
+
+tpmAggrReportHCStatSumSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmAggrReportStatSumSq.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+
+        dataSource."
+    ::= { tpmAggrReportEntry 16 }
+
+tpmAggrReportStatSumIX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For each interval, each data point is associated with a
+        value I, I = 1..N where N is the number of data points;
+        tpmAggrReportStatSumIX is the multiplication of the
+        data point value with the current I.  This value
+        along with the other statistics values allow the
+        calculation of the slope of the least-squares line
+        through the data points."
+    ::= { tpmAggrReportEntry 17 }
+
+tpmAggrReportOverflowStatSumIX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmAggrReportStatSumIX counter has overflowed.
+        Note that this object will only be instantiated if the
+        associated tpmAggrReportHCStatSumIX object is also
+        instantiated for a particular dataSource."
+    ::= { tpmAggrReportEntry 18 }
+
+tpmAggrReportHCStatSumIX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmAggrReportStatSumIX.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmAggrReportEntry 19 }
+
+tpmAggrReportStatSumIXSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For each interval, each data point is associated with a
+        value I, I = 1..N where N is the number of data points;
+        tpmAggrReportStatSumIXSq is the multiplication
+
+        of the data point value with the current I.
+        This value along with the other statistics
+        values allow the calculation of the slope of
+        the least-squares line through the data points."
+    ::= { tpmAggrReportEntry 20 }
+
+tpmAggrReportOverflowStatSumIXSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmAggrReportStatSumIXSq counter has overflowed.
+        Note that this object will only be instantiated if the
+        associated tpmAggrReportHCStatSumIXSq object is also
+        instantiated for a particular dataSource."
+    ::= { tpmAggrReportEntry 21 }
+
+tpmAggrReportHCStatSumIXSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmAggrReportStatSumIXSq.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmAggrReportEntry 22 }
+
+--
+-- The tpmCurrentReportsGroup
+--
+
+tpmCurReportTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TpmCurReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table will contain entries associated with an
+        apmReportControlEntry that consitute a current 'snapshot'
+        of the metrics being collected in association with
+        a set of TPM-related application transactions.
+        This table contains all sub-flow metrics for transactions
+        that have been started but have not yet finished (i.e.,
+        current) and a history of those that have finished (i.e.,
+        completed).  It may not always be obvious from the context
+        whether a transaction is currently in-progress or has
+        been completed.  Therefore, the completion status of a
+
+        transaction is indicated by the value of
+        the tpmCurReportCompletion object."
+    ::= { tpmReports 3 }
+
+tpmCurReportEntry OBJECT-TYPE
+    SYNTAX      TpmCurReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the tpmCurReportTable.
+
+        The tpmAggrReportControlIndex value in the index identifies
+        the tpmAggrReportCntrlEntry on whose behalf this entry was
+        created.  The tpmCurReportAppLocalIndex value in the
+        index identifies the application protocol that is being
+        reported.  The protocolDirLocalIndex value in the
+        index identifies the network layer protocol
+        of the tpmAggrReportServerAddress.  When the associated
+        tpmAggrReportCntrlAggrType value is
+        equal to applications(4), this value will equal 0.
+        The tpmCurReportServerAddress value in the
+        index identifies the network layer address of the
+        server in traffic flows aggregated in this entry.
+        The tpmCurReportCurrentApmNameClientID value in the
+        index identifies the network layer address of the
+        client in traffic flows aggregated in this entry.
+        The tpmCurReportCurrentMetricIndex value in the
+        index identifies the transported application protocol
+        of the traffic flows aggregated in this entry.
+
+        Note that the order of protocolDirLocalIndex variables is
+        the opposite of that in the RMON2 MIB (application.network
+        instead of network.application); the report entries are
+        sorted by application first, server second, and client third.
+        The tpmCurReportCntrIndex value in the index identifies
+        the tpmAggrReportCntrlEntry on whose behalf this entry was
+        created.  The tpmCurReportMetricIndex value in the index
+        identifies the metric and protocol of the
+        tpmCurReportServerAddress, via the tpmTransMetricDir
+        table.
+
+        An example of the indexing of this table is
+        tpmCurReportStatisticN.3.34.262.18.4.128.2.6.6.3256521.29667"
+    INDEX { tpmAggrReportCntrlIndex,
+            tpmCurReportAppLocalIndex,         -- Application Layer
+            tpmCurReportTransMetricIndex,      -- Metric and Protocol
+            protocolDirLocalIndex,             -- Network Layer
+            tpmCurReportServerAddress,
+            tpmCurReportApmNameClientID,
+            tpmCurReportApmTransactionID
+          }
+    ::= { tpmCurReportTable 1 }
+
+TpmCurReportEntry ::= SEQUENCE {
+    tpmCurReportAppLocalIndex              AppLocalIndex,
+    tpmCurReportTransMetricIndex           TpmTransactionMetricIndex,
+    tpmCurReportServerAddress              OCTET STRING,
+    tpmCurReportApmNameClientID            RmonClientID,
+    tpmCurReportApmTransactionID           Unsigned32,
+    tpmCurReportMetricValue                ZeroBasedCounter32,
+    tpmCurReportCompletion                 INTEGER
+}
+
+tpmCurReportAppLocalIndex  OBJECT-TYPE
+    SYNTAX      AppLocalIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The common application of the transactions reported
+        in this entry."
+    ::= { tpmCurReportEntry 1 }
+
+tpmCurReportTransMetricIndex OBJECT-TYPE
+    SYNTAX      TpmTransactionMetricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique index that identifies the transaction and
+        metric associated with the statistics reported here."
+    ::= { tpmCurReportEntry 2 }
+
+tpmCurReportServerAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..108))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The network server address for this tpmCurReportEntry.
+
+        This is represented as an octet string with
+        specific semantics and length as identified
+        by the protocolDirLocalIndex component of the index.
+
+        For example, if the protocolDirLocalIndex indicates an
+        encapsulation of IPv4, this object is encoded as a length
+        octet of 4, followed by the 4 octets of the IPv4 address,
+        in network byte order."
+    ::= { tpmCurReportEntry 3 }
+
+tpmCurReportApmNameClientID OBJECT-TYPE
+    SYNTAX      RmonClientID
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique ID assigned to the machine represented by this
+        mapping.  This ID is assigned by the agent using an
+        implementation-specific algorithm."
+    ::= { tpmCurReportEntry 4 }
+
+tpmCurReportApmTransactionID OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A unique value for this transaction amongst other
+        transactions sharing the same application,
+        transaction-layer protocol and metric, and
+        server and client addresses.  Implementations may choose to
+        use the value of the client's source port, when possible.
+
+        If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
+        then this object is set to the corresponding
+        apmTransactionID object in the APM-MIB developed
+        in the IETF's RMONMIB WG."
+    ::= { tpmCurReportEntry 5 }
+
+tpmCurReportMetricValue OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current value of the metric being evaluated.
+        For some transaction types this value may be 0, e.g.,
+        the current round-trip time for a DNS query.  For
+        other transaction types, this will represent the
+        current value of a continuously measured metric, e.g.,
+        the current throughput of an FTP transaction."
+    ::= { tpmCurReportEntry 6 }
+
+tpmCurReportCompletion OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    current(1),
+                    completed(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The status of this transaction.  It is not always obvious
+        from context whether a transaction is ongoing or
+        completed.  E.g., an ftp-GET transaction may last several
+        minutes or hours, and a value found in the
+        tpmCurReportMetricValue object lists to observed throughput
+        for the transaction up to this point in time.  The value
+        of the tpmCurReportCompletion indicates whether the
+        transaction has been completed."
+    ::= { tpmCurReportEntry 7 }
+
+tpmCurReportSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of completed transactions desired to be
+        retained in the tpmCurReportTable.  If the agent doesn't have
+        enough resources to retain this many, it will retain as many
+        as possible.  Regardless of this value, the agent must
+        attempt to keep records for all current transactions it is
+        monitoring.
+
+        The agent should consider this value to give a hint as to
+        how many transactions to save.  This is not a hard limit,
+        just a hint to a maximum value of interest.  If this value is
+        reduced by the management station, the agent can take note,
+        it may free some records, or it may do nothing.
+
+        The value of this object must persist across reboots."
+    ::= { tpmReports 4 }
+
+--
+-- The tpmExceptionReportsGroup
+--
+
+tpmExcpReportTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF TpmExcpReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains all sub-flow metrics for transactions
+        that have been tagged by the apmExceptionTable filter
+        as having had poor performance."
+    ::= { tpmReports 5 }
+
+tpmExcpReportEntry OBJECT-TYPE
+    SYNTAX      TpmExcpReportEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A conceptual row in the tpmExcpReportTable.  This table
+        contains aggregated information associated with
+        exceptions counted in the apmExceptionTable.  The
+        information is aggregated in a manner identical to the
+        aggregation in the tpmAggrReportTable, with the exception
+        that data only from transactions associated with a
+        flagged application is included.
+
+        The indexing into this table follows the indexing in the
+        APM-MIB but adds the tpmTransMetricIndex to identify the
+        sub-application transaction and metric pair."
+    INDEX { apmAppDirAppLocalIndex,       -- Application
+            apmAppDirResponsivenessType,  -- Responsiveness Type
+            apmExceptionIndex,            -- Linkage to ApmExceptions
+            tpmExcpReportTransMetricIndex -- Metric and Protocol
+          }
+    ::= { tpmExcpReportTable 1 }
+
+TpmExcpReportEntry ::= SEQUENCE {
+    tpmExcpReportTransMetricIndex         TpmTransactionMetricIndex,
+    tpmExcpReportStatN                    ZeroBasedCounter32,
+    tpmExcpReportOverflowStatN            ZeroBasedCounter32,
+    tpmExcpReportHCStatN                  ZeroBasedCounter64,
+    tpmExcpReportStatSumX                 ZeroBasedCounter32,
+    tpmExcpReportOverflowStatSumX         ZeroBasedCounter32,
+    tpmExcpReportHCStatSumX               ZeroBasedCounter64,
+    tpmExcpReportStatMaximum              ZeroBasedCounter32,
+    tpmExcpReportStatMinimum              ZeroBasedCounter32,
+    tpmExcpReportStatSumSq                ZeroBasedCounter32,
+    tpmExcpReportOverflowStatSumSq        ZeroBasedCounter32,
+    tpmExcpReportHCStatSumSq              ZeroBasedCounter64,
+    tpmExcpReportStatSumIX                ZeroBasedCounter32,
+    tpmExcpReportOverflowStatSumIX        ZeroBasedCounter32,
+    tpmExcpReportHCStatSumIX              ZeroBasedCounter64,
+    tpmExcpReportStatSumIXSq              ZeroBasedCounter32,
+    tpmExcpReportOverflowStatSumIXSq      ZeroBasedCounter32,
+    tpmExcpReportHCStatSumIXSq            ZeroBasedCounter64
+}
+
+tpmExcpReportTransMetricIndex OBJECT-TYPE
+    SYNTAX      TpmTransactionMetricIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "A unique index that identifies the transaction and
+         metric associated with the data reported here."
+    ::= { tpmExcpReportEntry 1 }
+
+tpmExcpReportStatN OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The count of the total number of data points for the
+        specified metric.  This number always represents the
+        total size of the statistical datum analyzed.  Each
+        metric specifies the exact meaning of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmExcpReportEntry 2 }
+
+tpmExcpReportOverflowStatN OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated tpmExcpReportStatN
+        counter has overflowed.  Note that this object will only
+        be instantiated if the associated tpmExcpReportHCStatN
+        object is also instantiated for a particular dataSource."
+    ::= { tpmExcpReportEntry 3 }
+
+tpmExcpReportHCStatN OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmExcpReportStatN.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmExcpReportEntry 4 }
+
+tpmExcpReportStatSumX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The sum of all the data point values for the specified
+        metric.  This number always represents the total values
+
+        of the statistical datum analyzed.  Each metric
+        specifies the exact meaning of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmExcpReportEntry 5 }
+
+tpmExcpReportOverflowStatSumX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmExcpReportStatSumX counter has overflowed.
+        Note that this object will only be instantiated if
+        the associated tpmExcpReportHCStatSumX object is also
+        instantiated for a particular dataSource."
+    ::= { tpmExcpReportEntry 6 }
+
+tpmExcpReportHCStatSumX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmExcpReportStatSumX.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmExcpReportEntry 7 }
+
+tpmExcpReportStatMaximum OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The single maximum data point value observed during the
+        study period for the specified metric.  This number always
+        represents the maximum value of any single statistical
+        datum analyzed.  Each metric specifies the exact meaning
+        of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmExcpReportEntry 8 }
+
+tpmExcpReportStatMinimum OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The single minimum data point value observed during the
+        study period for the specified metric.  This number always
+        represents the minimum value of any single statistical
+        datum analyzed.  Each metric specifies the exact meaning
+        of this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmExcpReportEntry 9 }
+
+tpmExcpReportStatSumSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The sum of all the squared data point values for the
+        specified metric.  This number always represents the
+        total of the squared values of the statistical datum
+        analyzed.  Each metric specifies the exact meaning of
+        this object.
+
+        This value represents the results of one metric and is
+        related directly to the specific parameters of the metric
+        and the Server and Client addresses involved."
+    ::= { tpmExcpReportEntry 10 }
+
+tpmExcpReportOverflowStatSumSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmExcpReportStatSumSq counter has overflowed.
+        Note that this object will only be instantiated if the
+        associated tpmExcpReportHCStatSumSq object is also
+        instantiated for a particular dataSource."
+    ::= { tpmExcpReportEntry 11 }
+
+tpmExcpReportHCStatSumSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmExcpReportStatSumSq.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmExcpReportEntry 12 }
+
+tpmExcpReportStatSumIX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For each interval, each data point is associated with a
+        value I, I = 1..N where N is the number of data points;
+        tpmExcpReportStatSumIX is the multiplication of the
+        data point value with the current I.  This value along with
+        the other statistics values allow the calculation of the
+        slope of the least-squares line through the data points."
+    ::= { tpmExcpReportEntry 13 }
+
+tpmExcpReportOverflowStatSumIX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmExcpReportStatSumIX counter has overflowed.
+        Note that this object will only be instantiated if the
+        associated tpmExcpReportHCStatSumIX object is also
+        instantiated for a particular dataSource."
+    ::= { tpmExcpReportEntry 14 }
+
+tpmExcpReportHCStatSumIX OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmExcpReportStatSumIX.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmExcpReportEntry 15 }
+
+tpmExcpReportStatSumIXSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For each interval, each data point is associated with a
+
+        value I, I = 1..N where N is the number of data points;
+        tpmExcpReportStatSumIXSq is the multiplication of the data
+        point value with the current I.  This value along with the
+        other statistics values allow the calculation of the slope of
+        the least-squares line through the data points."
+    ::= { tpmExcpReportEntry 16 }
+
+tpmExcpReportOverflowStatSumIXSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times the associated
+        tpmExcpReportStatSumIXSq counter has overflowed.
+        Note that this object will only be instantiated if the
+        associated tpmExcpReportHCStatSumIXSq object is also
+        instantiated for a particular dataSource."
+    ::= { tpmExcpReportEntry 17 }
+
+tpmExcpReportHCStatSumIXSq OBJECT-TYPE
+    SYNTAX      ZeroBasedCounter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The high-capacity version of tpmExcpReportStatSumIXSq.
+        Note that this object will only be instantiated if the
+        agent supports High Capacity monitoring for a particular
+        dataSource."
+    ::= { tpmExcpReportEntry 18 }
+
+--
+-- TPM Conformance
+--
+
+tpmMIBCompliances  OBJECT IDENTIFIER ::= { tpmConformance 1 }
+tpmGroups          OBJECT IDENTIFIER ::= { tpmConformance 2 }
+
+--
+-- TPM Compliance Statement
+--
+
+tpmMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "Describes the requirements for conformance to
+        the TPM-MIB.
+
+        This compliance statement defines the following
+
+        TPM-MIB implementation:
+
+         - tpmCapabilitiesGroup (minimum)
+         - tpmAggregateReportsGroup (minimum)
+         - tpmCurrentReportsGroup (optional)
+         - tpmExceptionReportsGroup (optional).
+
+        In order to implement the (optional)
+        tpmExceptionReportsGroup, it is necessary
+        to implement pieces of the APM-MIB as
+        described in the tpmApmMIBCompliance MODULE
+        below.  Further, in the event that the TPM-MIB
+        is used to provide a drill-down capability,
+        which is the true value of this MIB, then the
+        tpmApmReportControlGroup must be implemented."
+    MODULE -- this module
+
+    MANDATORY-GROUPS
+        { tpmCapabilitiesGroup,
+          tpmAggregateReportsGroup }
+
+    GROUP tpmCurrentReportsGroup
+    DESCRIPTION
+        "The implementation of this group is optional."
+
+    GROUP tpmExceptionReportsGroup
+    DESCRIPTION
+        "The implementation of this group is optional.
+        However, because the control for this reporting group
+        resides with the APM-MIB module, the apmReportGroup
+        and the apmExceptionGroup must also be implemented."
+    ::= { tpmMIBCompliances 1 }
+
+--
+-- tpmCurrentReportsGroup Compliance
+--
+tpmCurrentReportsCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "This defines the Current Reports compliance.
+             This is useful when information on in-progress
+             and historical transaction-level data is
+             desired."
+        MODULE -- this module
+
+        MANDATORY-GROUPS
+            { tpmCapabilitiesGroup,
+              tpmAggregateReportsGroup,
+              tpmCurrentReportsGroup }
+    ::= { tpmMIBCompliances 2 }
+
+--
+-- tpmExceptionReportsGroup Compliance
+--
+tpmExceptionReportsCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "This defines the Exception Reports compliance.
+             This is useful when information on
+             transactions whose performance is deemed
+             out-of-bounds."
+
+        MODULE -- this module
+
+        MANDATORY-GROUPS
+            { tpmCapabilitiesGroup,
+              tpmAggregateReportsGroup,
+              tpmExceptionReportsGroup }
+
+        MODULE APM-MIB
+
+        MANDATORY-GROUPS
+            { apmReportGroup,
+              apmExceptionGroup }
+    ::= { tpmMIBCompliances 3 }
+
+--
+--  TPM-MIB Groups
+--
+
+tpmCapabilitiesGroup    OBJECT-GROUP
+    OBJECTS { tpmClockResolution,
+              tpmClockMaxSkew,
+              tpmClockSource,
+              tpmTransMetricDirLastChange,
+              tpmTransMetricProtocolIndex,
+              tpmTransMetricMetricIndex,
+              tpmTransMetricDirConfig,
+              tpmMetricDefType,
+              tpmMetricDefDirType,
+              tpmMetricDefName,
+              tpmMetricDefReference,
+              tpmMetricDefGlobalID }
+    STATUS  current
+    DESCRIPTION
+        "The tpmCapabilitiesGroup specifies various capabilities
+        associated with the monitoring agent."
+    ::= { tpmGroups 1 }
+
+tpmAggregateReportsGroup    OBJECT-GROUP
+    OBJECTS { tpmAggrReportCntrlApmCntrlIndex,
+              tpmAggrReportCntrlDataSource,
+              tpmAggrReportCntrlAggrType,
+              tpmAggrReportCntrlInterval,
+              tpmAggrReportCntrlReqSize,
+              tpmAggrReportCntrlGrantedSize,
+              tpmAggrReportCntrlReqReports,
+              tpmAggrReportCntrlGrantedReports,
+              tpmAggrReportCntrlStartTime,
+              tpmAggrReportCntrlReportNumber,
+              tpmAggrReportCntrlInsertsDenied,
+              tpmAggrReportCntrlDroppedFrames,
+              tpmAggrReportCntrlOwner,
+              tpmAggrReportCntrlStorageType,
+              tpmAggrReportCntrlStatus,
+              tpmAggrReportStatN,
+              tpmAggrReportOverflowStatN,
+              tpmAggrReportHCStatN,
+              tpmAggrReportStatSumX,
+              tpmAggrReportOverflowStatSumX,
+              tpmAggrReportHCStatSumX,
+              tpmAggrReportStatMaximum,
+              tpmAggrReportStatMinimum,
+              tpmAggrReportStatSumSq,
+              tpmAggrReportOverflowStatSumSq,
+              tpmAggrReportHCStatSumSq,
+              tpmAggrReportStatSumIX,
+              tpmAggrReportOverflowStatSumIX,
+              tpmAggrReportHCStatSumIX,
+              tpmAggrReportStatSumIXSq,
+              tpmAggrReportOverflowStatSumIXSq,
+              tpmAggrReportHCStatSumIXSq }
+    STATUS  current
+    DESCRIPTION
+        "The tpmAggregateReportsGroup provides control
+        and reporting of aggregate measurement
+        statistics."
+    ::= { tpmGroups 2 }
+
+tpmCurrentReportsGroup  OBJECT-GROUP
+    OBJECTS { tpmCurReportMetricValue,
+              tpmCurReportCompletion,
+              tpmCurReportSize }
+    STATUS  current
+    DESCRIPTION
+        "The tpmCurrentReportsGroup contains metric
+        information relating to ongoing measurements
+        as well as historical values."
+    ::= { tpmGroups 3 }
+
+tpmExceptionReportsGroup  OBJECT-GROUP
+    OBJECTS { tpmExcpReportStatN,
+              tpmExcpReportOverflowStatN,
+              tpmExcpReportHCStatN,
+              tpmExcpReportStatSumX,
+              tpmExcpReportOverflowStatSumX,
+              tpmExcpReportHCStatSumX,
+              tpmExcpReportStatMaximum,
+              tpmExcpReportStatMinimum,
+              tpmExcpReportStatSumSq,
+              tpmExcpReportOverflowStatSumSq,
+              tpmExcpReportHCStatSumSq,
+              tpmExcpReportStatSumIX,
+              tpmExcpReportOverflowStatSumIX,
+              tpmExcpReportHCStatSumIX,
+              tpmExcpReportStatSumIXSq,
+              tpmExcpReportOverflowStatSumIXSq,
+              tpmExcpReportHCStatSumIXSq }
+    STATUS  current
+    DESCRIPTION
+        "The tpmExceptionReportsGroup reports
+        sub-application level statistics associated
+        with errant applications."
+    ::= { tpmGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/TRANSPORT-ADDRESS-MIB.mib b/snmp_builder/mibs/TRANSPORT-ADDRESS-MIB.mib
new file mode 100644
index 0000000..227886e
--- /dev/null
+++ b/snmp_builder/mibs/TRANSPORT-ADDRESS-MIB.mib
@@ -0,0 +1,421 @@
+TRANSPORT-ADDRESS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, mib-2     FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                          FROM SNMPv2-TC;
+
+transportAddressMIB MODULE-IDENTITY
+    LAST-UPDATED "200211010000Z"
+    ORGANIZATION
+        "IETF Operations and Management Area"
+    CONTACT-INFO
+        "Juergen Schoenwaelder (Editor)
+         TU Braunschweig
+         Bueltenweg 74/75
+         38106 Braunschweig, Germany
+
+         Phone: +49 531 391-3289
+         EMail: schoenw@ibr.cs.tu-bs.de
+
+         Send comments to <mibs@ops.ietf.org>."
+    DESCRIPTION
+        "This MIB module provides commonly used transport
+         address definitions.
+
+         Copyright (C) The Internet Society (2002). This version of
+         this MIB module is part of RFC 3419; see the RFC itself for
+         full legal notices."
+
+    -- Revision log
+
+    REVISION    "200211010000Z"
+    DESCRIPTION
+        "Initial version, published as RFC 3419."
+    ::= { mib-2 100 }
+
+transportDomains OBJECT IDENTIFIER ::= { transportAddressMIB 1 }
+
+transportDomainUdpIpv4 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4 for
+         global IPv4 addresses."
+    ::= { transportDomains 1 }
+
+transportDomainUdpIpv6 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6 for
+         global IPv6 addresses."
+    ::= { transportDomains 2 }
+
+transportDomainUdpIpv4z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4z for
+         scoped IPv4 addresses with a zone index."
+    ::= { transportDomains 3 }
+
+transportDomainUdpIpv6z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6z for
+         scoped IPv6 addresses with a zone index."
+    ::= { transportDomains 4 }
+
+transportDomainTcpIpv4 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4 for
+         global IPv4 addresses."
+    ::= { transportDomains 5 }
+
+transportDomainTcpIpv6 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6 for
+         global IPv6 addresses."
+    ::= { transportDomains 6 }
+
+transportDomainTcpIpv4z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4z for
+         scoped IPv4 addresses with a zone index."
+    ::= { transportDomains 7 }
+
+transportDomainTcpIpv6z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6z for
+         scoped IPv6 addresses with a zone index."
+    ::= { transportDomains 8 }
+
+transportDomainSctpIpv4 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4 for
+         global IPv4 addresses. This transport domain usually
+         represents the primary address on multihomed SCTP
+         endpoints."
+    ::= { transportDomains 9 }
+
+transportDomainSctpIpv6 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6 for
+         global IPv6 addresses. This transport domain usually
+         represents the primary address on multihomed SCTP
+         endpoints."
+    ::= { transportDomains 10 }
+
+transportDomainSctpIpv4z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4z for
+         scoped IPv4 addresses with a zone index. This transport
+         domain usually represents the primary address on
+         multihomed SCTP endpoints."
+    ::= { transportDomains 11 }
+
+transportDomainSctpIpv6z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6z for
+         scoped IPv6 addresses with a zone index. This transport
+         domain usually represents the primary address on
+         multihomed SCTP endpoints."
+    ::= { transportDomains 12 }
+
+transportDomainLocal OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The Posix Local IPC transport domain. The corresponding
+         transport address is of type TransportAddressLocal.
+
+         The Posix Local IPC transport domain incorporates the
+         well-known UNIX domain sockets."
+    ::= { transportDomains 13 }
+
+transportDomainUdpDns OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP transport domain using fully qualified domain
+         names. The corresponding transport address is of type
+         TransportAddressDns."
+    ::= { transportDomains 14 }
+
+transportDomainTcpDns OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP transport domain using fully qualified domain
+         names. The corresponding transport address is of type
+         TransportAddressDns."
+    ::= { transportDomains 15 }
+
+transportDomainSctpDns OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP transport domain using fully qualified domain
+         names. The corresponding transport address is of type
+         TransportAddressDns."
+    ::= { transportDomains 16 }
+
+TransportDomain ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value that represents a transport domain.
+
+         Some possible values, such as transportDomainUdpIpv4, are
+         defined in this module.  Other possible values can be
+         defined in other MIB modules."
+    SYNTAX      OBJECT IDENTIFIER
+
+--
+-- The enumerated values of the textual convention below should
+-- be identical to the last sub-identifier of the OID registered
+-- for the same domain.
+--
+
+TransportAddressType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value that represents a transport domain. This is the
+         enumerated version of the transport domain registrations
+         in this MIB module. The enumerated values have the
+         following meaning:
+
+         unknown(0)     unknown transport address type
+         udpIpv4(1)     transportDomainUdpIpv4
+         udpIpv6(2)     transportDomainUdpIpv6
+         udpIpv4z(3)    transportDomainUdpIpv4z
+         udpIpv6z(4)    transportDomainUdpIpv6z
+         tcpIpv4(5)     transportDomainTcpIpv4
+         tcpIpv6(6)     transportDomainTcpIpv6
+         tcpIpv4z(7)    transportDomainTcpIpv4z
+
+         tcpIpv6z(8)    transportDomainTcpIpv6z
+         sctpIpv4(9)    transportDomainSctpIpv4
+         sctpIpv6(10)   transportDomainSctpIpv6
+         sctpIpv4z(11)  transportDomainSctpIpv4z
+         sctpIpv6z(12)  transportDomainSctpIpv6z
+         local(13)      transportDomainLocal
+         udpDns(14)     transportDomainUdpDns
+         tcpDns(15)     transportDomainTcpDns
+         sctpDns(16)    transportDomainSctpDns
+
+         This textual convention can be used to represent transport
+         domains in situations where a syntax of TransportDomain is
+         unwieldy (for example, when used as an index).
+
+         The usage of this textual convention implies that additional
+         transport domains can only be supported by updating this MIB
+         module. This extensibility restriction does not apply for the
+         TransportDomain textual convention which allows MIB authors
+         to define additional transport domains independently in
+         other MIB modules."
+    SYNTAX      INTEGER {
+                    unknown(0),
+                    udpIpv4(1),
+                    udpIpv6(2),
+                    udpIpv4z(3),
+                    udpIpv6z(4),
+                    tcpIpv4(5),
+                    tcpIpv6(6),
+                    tcpIpv4z(7),
+                    tcpIpv6z(8),
+                    sctpIpv4(9),
+                    sctpIpv6(10),
+                    sctpIpv4z(11),
+                    sctpIpv6z(12),
+                    local(13),
+                    udpDns(14),
+                    tcpDns(15),
+                    sctpDns(16)
+                }
+
+TransportAddress ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Denotes a generic transport address.
+
+         A TransportAddress value is always interpreted within the
+         context of a TransportAddressType or TransportDomain value.
+         Every usage of the TransportAddress textual convention MUST
+
+         specify the TransportAddressType or TransportDomain object
+         which provides the context. Furthermore, MIB authors SHOULD
+         define a separate TransportAddressType or TransportDomain
+         object for each TransportAddress object. It is suggested that
+         the TransportAddressType or TransportDomain is logically
+         registered before the object(s) which use the
+         TransportAddress textual convention if they appear in the
+         same logical row.
+
+         The value of a TransportAddress object must always be
+         consistent with the value of the associated
+         TransportAddressType or TransportDomain object. Attempts
+         to set a TransportAddress object to a value which is
+         inconsistent with the associated TransportAddressType or
+         TransportDomain must fail with an inconsistentValue error.
+
+         When this textual convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58. In this case,
+         the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers."
+    SYNTAX      OCTET STRING (SIZE (0..255))
+
+TransportAddressIPv4 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv4
+         address and a port number (as used for example by UDP,
+         TCP and SCTP):
+
+          octets       contents         encoding
+           1-4         IPv4 address     network-byte order
+           5-6         port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (6))
+
+TransportAddressIPv6 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv6
+         address and a port number (as used for example by UDP,
+         TCP and SCTP):
+
+          octets       contents         encoding
+           1-16        IPv6 address     network-byte order
+          17-18        port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (18))
+
+TransportAddressIPv4z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d%4d:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv4
+         address, a zone index and a port number (as used for
+         example by UDP, TCP and SCTP):
+
+          octets       contents         encoding
+           1-4         IPv4 address     network-byte order
+           5-8         zone index       network-byte order
+           9-10        port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (10))
+
+TransportAddressIPv6z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv6
+         address, a zone index and a port number (as used for
+         example by UDP, TCP and SCTP):
+
+          octets       contents         encoding
+           1-16        IPv6 address     network-byte order
+          17-20        zone index       network-byte order
+          21-22        port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (22))
+
+TransportAddressLocal ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1a"
+    STATUS      current
+    DESCRIPTION
+        "Represents a POSIX Local IPC transport address:
+
+          octets       contents                   encoding
+           all         POSIX Local IPC address    string
+
+         The Posix Local IPC transport domain subsumes UNIX domain
+         sockets.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair.
+
+         When this textual convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58. In this case,
+         the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers."
+    REFERENCE
+        "Protocol Independent Interfaces (IEEE POSIX 1003.1g)"
+    SYNTAX      OCTET STRING (SIZE (1..255))
+
+TransportAddressDns ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1a"
+    STATUS      current
+    DESCRIPTION
+        "Represents a DNS domain name followed by a colon ':'
+         (ASCII character 0x3A) and a port number in ASCII.
+         The name SHOULD be fully qualified whenever possible.
+
+         Values of this textual convention are not directly useable as
+         transport-layer addressing information, and require runtime
+         resolution. As such, applications that write them must be
+         prepared for handling errors if such values are not
+         supported, or cannot be resolved (if resolution occurs at the
+         time of the management operation).
+
+         The DESCRIPTION clause of TransportAddress objects that may
+
+         have TransportAddressDns values must fully describe how (and
+         when) such names are to be resolved to IP addresses and vice
+         versa.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair.
+
+         When this textual convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58. In this case,
+         the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers."
+    SYNTAX      OCTET STRING (SIZE (1..255))
+
+END
diff --git a/snmp_builder/mibs/TRIP-MIB.mib b/snmp_builder/mibs/TRIP-MIB.mib
new file mode 100644
index 0000000..295dd18
--- /dev/null
+++ b/snmp_builder/mibs/TRIP-MIB.mib
@@ -0,0 +1,2007 @@
+TRIP-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        MODULE-IDENTITY,
+        OBJECT-TYPE,
+        NOTIFICATION-TYPE,
+        Unsigned32,
+        Integer32,
+        Counter32,
+        mib-2
+            FROM SNMPv2-SMI           -- [RFC2578]
+
+        DateAndTime,
+        TimeInterval,
+        TruthValue,
+        TimeStamp,
+        StorageType,
+        RowStatus
+            FROM SNMPv2-TC            -- [RFC2579]
+
+        OBJECT-GROUP,
+        MODULE-COMPLIANCE,
+        NOTIFICATION-GROUP
+            FROM SNMPv2-CONF          -- [RFC2580]
+
+        InetAddressType,
+        InetAddress,
+        InetPortNumber
+            FROM INET-ADDRESS-MIB     -- [RFC3291]
+
+        applIndex,
+        applRFC2788Group
+            FROM NETWORK-SERVICES-MIB -- [RFC2788]
+
+        TripItad,
+        TripId,
+        TripAppProtocol,
+        TripAddressFamily,
+        TripCommunityId,
+        TripProtocolVersion,
+        TripSendReceiveMode
+            FROM TRIP-TC-MIB;          -- [RFC3872]
+
+    tripMIB MODULE-IDENTITY
+       LAST-UPDATED "200409020000Z" -- Sep 02, 2004
+           ORGANIZATION "IETF IPTel Working Group.
+
+            Mailing list: iptel@lists.bell-labs.com"
+
+       CONTACT-INFO
+           "Co-editor  David Zinman
+            postal:    265 Ridley Blvd.
+                       Toronto ON, M5M 4N8
+                       Canada
+            email:     dzinman@rogers.com
+            phone:     +1 416 433 4298
+
+        Co-editor: David Walker
+                   Sedna Wireless Inc.
+        postal:    495 March Road, Suite 500
+                   Ottawa, ON K2K 3G1
+                   Canada
+        email:     david.walker@sedna-wireless.com
+        phone:     +1 613 878 8142
+
+        Co-editor   Jianping Jiang
+                    Syndesis Limited
+        postal:     30 Fulton Way
+                    Richmond Hill, ON L4B 1J5
+                    Canada
+
+        email:      jjiang@syndesis.com
+        phone:      +1 905 886-7818 x2515
+            "
+        DESCRIPTION
+            "The MIB module describing Telephony Routing over IP
+            (TRIP). TRIP is a policy driven inter-administrative
+            domain protocol for advertising the reachability of
+            telephony destinations between location servers (LS), and
+            for advertising attributes of the routes to those
+            destinations.
+
+            Copyright (C) The Internet Society (2004). This version of
+            this MIB module is part of RFC 3872, see the RFC itself
+            for full legal notices."
+        REVISION      "200409020000Z" -- Sep 02, 2004
+        DESCRIPTION
+            "The initial version, Published as RFC 3872."
+    ::= { mib-2 116 }
+
+        tripMIBNotifications OBJECT IDENTIFIER ::= { tripMIB 0 }
+        tripMIBObjects       OBJECT IDENTIFIER ::= { tripMIB 1 }
+        tripMIBConformance   OBJECT IDENTIFIER ::= { tripMIB 2 }
+        tripMIBNotifObjects  OBJECT IDENTIFIER ::= { tripMIB 3 }
+
+        tripMIBCompliances    OBJECT IDENTIFIER ::=
+                                        { tripMIBConformance 1 }
+        tripMIBGroups        OBJECT IDENTIFIER ::=
+                                        { tripMIBConformance 2 }
+
+   --
+   -- tripCfgTable
+   --
+    tripCfgTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF TripCfgEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "This table contains the common configuration objects
+             applicable to all TRIP applications referenced by the
+             applIndex.  Each row represents those objects for a
+             particular TRIP LS present in this system. The
+             instances of TRIP LS's are uniquely identified by the
+             applIndex. The objects in this table SHOULD be
+             nonVolatile and survive a reboot."
+        ::= { tripMIBObjects 1 }
+
+    tripCfgEntry OBJECT-TYPE
+        SYNTAX     TripCfgEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+            "A row of common configuration."
+        INDEX { applIndex }
+        ::= { tripCfgTable 1 }
+
+    TripCfgEntry ::=
+        SEQUENCE {
+           tripCfgProtocolVersion               TripProtocolVersion,
+           tripCfgItad                          TripItad,
+           tripCfgIdentifier                    TripId,
+           tripCfgAdminStatus                   INTEGER,
+           tripCfgOperStatus                    INTEGER,
+           tripCfgAddrIAddrType                 InetAddressType,
+           tripCfgAddr                          InetAddress,
+           tripCfgPort                          InetPortNumber,
+           tripCfgMinItadOriginationInterval    Unsigned32,
+           tripCfgMinRouteAdvertisementInterval Unsigned32,
+           tripCfgMaxPurgeTime                  Unsigned32,
+           tripCfgDisableTime                   Unsigned32,
+           tripCfgSendReceiveMode               TripSendReceiveMode,
+           tripCfgStorage                       StorageType
+       }
+
+    tripCfgProtocolVersion    OBJECT-TYPE
+        SYNTAX     TripProtocolVersion
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+            "This object will reflect the version of TRIP
+            supported by this system.  It follows the same
+            format as TRIP version information contained
+            in the TRIP messages generated by this TRIP entity."
+        REFERENCE
+            "RFC 3219, section 4.2."
+        ::= { tripCfgEntry 1 }
+
+    tripCfgItad   OBJECT-TYPE
+        SYNTAX      TripItad
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The Internet Telephony Administrative domain (ITAD)
+            of this LS."
+        ::= { tripCfgEntry 2 }
+
+    tripCfgIdentifier   OBJECT-TYPE
+        SYNTAX      TripId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The object that identifies this TRIP Client."
+        ::= { tripCfgEntry 3 }
+
+    tripCfgAdminStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        up(1),
+                        down(2)
+                    }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The desired TRIP state.
+
+             up(1)  : Set the application to normal operation.
+
+             down(2): Set the application to a state where it will
+                      not process TRIP messages.
+
+             Setting this object should be reflected in
+             tripCfgOperStatus. If an unknown error occurs
+             tripCfgOperStatus will return unknown(0)."
+        ::= { tripCfgEntry 4 }
+
+    tripCfgOperStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        unknown(0),
+                        up(1),
+                        down(2),
+                        faulty(3)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The current operational state of the TRIP protocol.
+
+             unknown(0): The operating status of the application is
+                         unknown.
+
+             up(1):      The application is operating normally, and
+                         is ready to process (receive and issue) TRIP
+                         requests and responses.
+
+             down(2):    The application is currently not processing
+                         TRIP messages. This occurs if the TRIP
+                         application is in an initialization state or
+                         if tripCfgAdminStatus is set to down(2).
+
+             faulty(3):  The application is not operating normally due
+                         to a fault in the system.
+
+            If tripCfgAdminStatus is down(2) then tripOperStatus SHOULD
+            be down(2). If tripAdminStatus is changed to up(1) then
+            tripOperStatus SHOULD change to up(1) if there is no
+            fault that prevents the TRIP protocol from moving to the
+            up(1) state."
+        ::= { tripCfgEntry 5 }
+
+    tripCfgAddrIAddrType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of Inet Address of the tripAddr."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripCfgEntry 6 }
+
+    tripCfgAddr OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The network address of the local LS that the peer
+            connects to. The type of address depends on the object
+            tripCfgAddrIAddrType. The type of this address is
+            determined by the value of the
+            tripCfgAddrIAddrType object."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripCfgEntry 7 }
+
+    tripCfgPort OBJECT-TYPE
+        SYNTAX      InetPortNumber
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The local tcp/udp port on the local LS that the peer
+            connects to."
+        ::= { tripCfgEntry 8 }
+
+    tripCfgMinItadOriginationInterval OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The minimum amount of time that MUST elapse between
+            advertisement of the update message that reports changes
+            within the LS's own ITAD."
+        DEFVAL { 30 }
+        ::= { tripCfgEntry 9 }
+
+    tripCfgMinRouteAdvertisementInterval OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Specifies minimal interval between successive
+            advertisements to a particular destination from an LS."
+        DEFVAL { 30 }
+        ::= { tripCfgEntry 10 }
+
+    tripCfgMaxPurgeTime OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Indicates the interval that the LS MUST maintain routes
+            marked as withdrawn in its database."
+        DEFVAL { 10 }
+        ::= { tripCfgEntry 11 }
+
+    tripCfgDisableTime OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Indicates the interval that the TRIP module of the
+            LS MUST be disabled while routes originated by this
+            LS with high sequence numbers can be removed."
+        DEFVAL { 180 }
+        ::= { tripCfgEntry 12 }
+
+    tripCfgSendReceiveMode OBJECT-TYPE
+        SYNTAX TripSendReceiveMode
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The operational mode of the TRIP entity running on this
+            system."
+        ::= { tripCfgEntry 13 }
+
+    tripCfgStorage OBJECT-TYPE
+        SYNTAX       StorageType
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+           "The storage type for this conceptual row. Conceptual rows
+           having the value 'permanent' need not allow write-access
+           to any columnar objects in the row."
+        DEFVAL { nonVolatile }
+        ::= { tripCfgEntry 14 }
+
+ --
+ -- TripRouteTypeTable
+ --
+
+    tripRouteTypeTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripRouteTypeEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The TRIP peer Route Type table contains one entry per
+            supported protocol - address family pair.  The objects in
+            this table are volatile and are refreshed after a reboot."
+        ::= { tripMIBObjects 2 }
+
+    tripRouteTypeEntry OBJECT-TYPE
+        SYNTAX      TripRouteTypeEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "An entry containing information about the route type
+            that a particular TRIP entity supports. Each entry
+            represents information about either the local or a remote
+            LS peer.  The object tripRouteTypePeer is used to
+            distinguish this.  In the case of a local LS, the
+            address/port information will reflect the values
+            configured in tripCfgTable.  In the case of a remote
+            peer, the address/port information will reflect the
+            values of an entry in the tripPeerTable.
+
+            Implementation need to be aware that if the size of
+            tripRouteTypeAddr exceeds 111 sub-IDs, then OIDs of column
+            instances in this table will have more than 128 sub-IDs
+            and cannot be accessed using SNMPv1, SNMPv2c, or snmpv3."
+        INDEX { applIndex,
+                tripRouteTypeAddrInetType,
+                tripRouteTypeAddr,
+                tripRouteTypePort,
+                tripRouteTypeProtocolId,
+                tripRouteTypeAddrFamilyId }
+          ::= { tripRouteTypeTable 1 }
+
+    TripRouteTypeEntry ::= SEQUENCE {
+        tripRouteTypeAddrInetType       InetAddressType,
+        tripRouteTypeAddr               InetAddress,
+        tripRouteTypePort               InetPortNumber,
+        tripRouteTypeProtocolId         TripAppProtocol,
+        tripRouteTypeAddrFamilyId       TripAddressFamily,
+        tripRouteTypePeer               INTEGER
+    }
+
+    tripRouteTypeAddrInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The type of Inet Address of the tripRouteTypeAddr."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripRouteTypeEntry 1 }
+
+    tripRouteTypeAddr OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The network address of this entry's TRIP peer LS. The
+            type of this address is determined by the value of the
+            tripRouteTypeAddrInetType object."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripRouteTypeEntry 2 }
+
+    tripRouteTypePort OBJECT-TYPE
+        SYNTAX      InetPortNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The port for the TCP connection between this and
+            an associated TRIP peer."
+        ::= { tripRouteTypeEntry 3 }
+
+    tripRouteTypeProtocolId OBJECT-TYPE
+        SYNTAX      TripAppProtocol
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The object identifier of a protocol that the associated
+            peer is using."
+        ::= { tripRouteTypeEntry 4 }
+
+    tripRouteTypeAddrFamilyId OBJECT-TYPE
+        SYNTAX      TripAddressFamily
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The object identifier of an address family that the
+            associated peer belongs to."
+        ::= { tripRouteTypeEntry 5 }
+
+    tripRouteTypePeer OBJECT-TYPE
+        SYNTAX      INTEGER { local(1), remote(2) }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object identifies whether this entry is
+
+            associated with a 'local' or 'remote' LS peer."
+        ::= { tripRouteTypeEntry 6 }
+
+ --
+ -- tripSupportedCommunityTable
+ --
+
+    tripSupportedCommunityTable   OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripSupportedCommunityEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The list of TRIP communities that this LS supports. A
+            TRIP community is a group of destinations that share
+            common properties.
+
+            The TRIP Supported Communities entry is used to group
+            destinations so that the routing decision can be based
+            on the identity of the group."
+        REFERENCE
+            "RFC 3219, section 5.9"
+        ::= { tripMIBObjects 3 }
+
+    tripSupportedCommunityEntry OBJECT-TYPE
+        SYNTAX      TripSupportedCommunityEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Entry containing information about a community. A TRIP
+            community is a group of destinations that share some
+            common property. This attribute is used so that routing
+            decisions can be based on the identity of the group."
+        INDEX { applIndex, tripSupportedCommunityId }
+        ::= { tripSupportedCommunityTable 1 }
+
+    TripSupportedCommunityEntry ::= SEQUENCE {
+        tripSupportedCommunityId         TripCommunityId,
+        tripSupportedCommunityItad       TripItad,
+        tripSupportedCommunityStorage    StorageType,
+        tripSupportedCommunityRowStatus  RowStatus
+    }
+
+    tripSupportedCommunityId OBJECT-TYPE
+        SYNTAX      TripCommunityId
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The identifier of the supported Community."
+        ::= { tripSupportedCommunityEntry 1 }
+
+    tripSupportedCommunityItad OBJECT-TYPE
+        SYNTAX      TripItad
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The ITAD of the community."
+        ::= { tripSupportedCommunityEntry 2 }
+
+   tripSupportedCommunityStorage OBJECT-TYPE
+       SYNTAX       StorageType
+       MAX-ACCESS   read-create
+       STATUS       current
+       DESCRIPTION
+          "The storage type for this conceptual row.  Conceptual
+          rows having the value 'permanent' need not allow write-
+          access to any columnar objects in the row. It is not a
+          requirement that this storage be non volatile."
+       DEFVAL { nonVolatile }
+       ::= { tripSupportedCommunityEntry 3 }
+
+    tripSupportedCommunityRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The row status of the entry. This object is REQUIRED
+            to create or delete rows by a manager. A value for
+            tripSupportedCommunityItad MUST be set for row creation
+            to be successful. If the instance already exists for a
+            particular applIndex, the row create operation will
+            fail.
+
+            The value of this object has no effect on whether
+            other objects in this conceptual row can be modified."
+        ::= { tripSupportedCommunityEntry 4 }
+
+ --
+ -- TripPeerTable
+ --
+    tripPeerTable   OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripPeerEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The TRIP peer table. This table contains one entry per
+            TRIP peer, and information about the connection with
+
+            the peer."
+        ::= { tripMIBObjects 4 }
+
+    tripPeerEntry OBJECT-TYPE
+        SYNTAX      TripPeerEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Entry containing information about the connection with
+            a TRIP peer.
+
+            Implementation need to be aware that if the size of
+            tripPeerRemoteAddr exceeds 113 sub-IDs, then OIDs of
+            column instances in this table will have more than 128
+            sub-IDs and cannot be accessed using SNMPv1, SNMPv2c, or
+            snmpv3."
+        INDEX { applIndex,
+                tripPeerRemoteAddrInetType,
+                tripPeerRemoteAddr,
+                tripPeerRemotePort }
+          ::= {tripPeerTable 1}
+
+    TripPeerEntry ::= SEQUENCE {
+        tripPeerRemoteAddrInetType            InetAddressType,
+        tripPeerRemoteAddr                    InetAddress,
+        tripPeerRemotePort                    InetPortNumber,
+        tripPeerIdentifier                    TripId,
+        tripPeerState                         INTEGER,
+        tripPeerAdminStatus                   INTEGER,
+        tripPeerNegotiatedVersion             TripProtocolVersion,
+        tripPeerSendReceiveMode               TripSendReceiveMode,
+        tripPeerRemoteItad                    TripItad,
+        tripPeerConnectRetryInterval          Unsigned32,
+        tripPeerMaxRetryInterval              Unsigned32,
+        tripPeerHoldTime                      Unsigned32,
+        tripPeerKeepAlive                     Unsigned32,
+        tripPeerHoldTimeConfigured            Unsigned32,
+        tripPeerKeepAliveConfigured           Unsigned32,
+        tripPeerMaxPurgeTime                  Unsigned32,
+        tripPeerDisableTime                   Unsigned32,
+        tripPeerLearned                       TruthValue,
+        tripPeerStorage                       StorageType,
+        tripPeerRowStatus                     RowStatus
+    }
+
+    tripPeerRemoteAddrInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The type of Inet Address of the tripPeerRemoteAddr."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripPeerEntry 1 }
+
+    tripPeerRemoteAddr OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The IP address of this entry's TRIP peer LS. The type of
+            this address is determined by the value of the
+            tripPeerRemoteAddrInetType object."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripPeerEntry 2 }
+
+    tripPeerRemotePort OBJECT-TYPE
+        SYNTAX      InetPortNumber
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The remote port for the TCP connection between the
+            TRIP peers."
+        ::= { tripPeerEntry 3 }
+
+    tripPeerIdentifier OBJECT-TYPE
+        SYNTAX      TripId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "TRIP identifier of the peer."
+        ::= { tripPeerEntry 4 }
+
+    tripPeerState OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        idle(1),
+                        connect(2),
+                        active(3),
+                        openSent(4),
+                        openConfirm(5),
+                        established(6)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "TRIP Peer Finite State Machine state.
+
+            idle(1)       : The initial state. Local LS refuses all
+                            incoming connections. No application
+                            resources are allocated to processing
+                            information about the remote peer.
+
+            connect(2)    : Local LS waiting for a transport
+                            protocol connection to be completed to
+                            the peer, and is listening for inbound
+                            transport connections from the peer.
+
+            active(3)     : Local LS is listening for an inbound
+                            connection from the peer, but is not in
+                            the process of initiating a connection
+                            to the remote peer.
+
+            openSent(4)   : Local LS has sent an OPEN message to its
+                            peer and is waiting for an OPEN message
+                            from the remote peer.
+
+            openConfirm(5): Local LS has sent an OPEN message to the
+                            remote peer, received an OPEN message from
+                            the remote peer, and sent a KEEPALIVE
+                            message in response to the OPEN. The local
+                            LS is now waiting for a KEEPALIVE message
+                            or a NOTIFICATION message in response to
+                            its OPEN message.
+
+            established(6): LS can exchange UPDATE, NOTIFICATION, and
+                            KEEPALIVE messages with its peer."
+        ::= { tripPeerEntry 5 }
+
+    tripPeerAdminStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        up(1),
+                        down(2)
+                    }
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "This object is used to affect the TRIP connection
+            state.
+
+            up(1)   : Allow a connection with the peer LS.
+
+            down(2) : disconnect the connection from the peer LS and
+                      do not allow any further connections to this
+
+                      peer.
+
+            If this value is set to down(2) then tripPeerState will
+            have the value of idle(1)."
+        DEFVAL      { up }
+        ::= { tripPeerEntry 6 }
+
+    tripPeerNegotiatedVersion OBJECT-TYPE
+        SYNTAX      TripProtocolVersion
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The negotiated version of TRIP running between this
+            local entity and this peer."
+        ::= { tripPeerEntry 7 }
+
+    tripPeerSendReceiveMode OBJECT-TYPE
+        SYNTAX      TripSendReceiveMode
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The operational mode of this peer."
+        ::= { tripPeerEntry 8 }
+
+    tripPeerRemoteItad OBJECT-TYPE
+        SYNTAX      TripItad
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The Internet Telephony Administrative domain of
+            this peer."
+        ::= { tripPeerEntry 9 }
+
+    tripPeerConnectRetryInterval OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Specifies the initial amount of time that will elapse
+            between connection retry. This value SHOULD double
+            after each attempt up to the value of
+            tripPeerMaxRetryInterval. This value MUST always be less
+            than or equal to the value of tripPeerMaxRetryInterval.
+            Attempts to set this value higher than the max retry
+            will not be allowed."
+        DEFVAL      { 120 }
+        ::= { tripPeerEntry 10 }
+
+    tripPeerMaxRetryInterval OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Specifies the maximum amount of time that will elapse
+            between connection retries. Once the value of
+            tripPeerConnectRetryInterval has reached this value, no
+            more retries will be attempted. Attempts to set this
+            value lower than the retry interval SHOULD not be
+            allowed."
+        DEFVAL      { 360 }
+        ::= { tripPeerEntry 11 }
+
+    tripPeerHoldTime OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The time interval in seconds for the hold timer that
+            is established with the peer. The value of this object
+            is the smaller of the values in
+            tripPeerHoldTimeConfigured and the hold time received
+            in the open message."
+        ::= { tripPeerEntry 12 }
+
+    tripPeerKeepAlive OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Specifies the amount of time that MUST elapse between
+            keep alive messages. This value is negotiated with the
+            remote when a connection is established."
+        ::= { tripPeerEntry 13 }
+
+    tripPeerHoldTimeConfigured OBJECT-TYPE
+        SYNTAX      Unsigned32 (0 | 3..65535)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Specifies the maximum time that MAY elapse between the
+            receipt of successive keepalive or update message. A value
+            of 0 means that keepalive or update messages will not be
+
+            sent."
+        DEFVAL { 240 }
+        ::= { tripPeerEntry 14 }
+
+    tripPeerKeepAliveConfigured OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Specifies the amount of time that MUST elapse between
+            keep alive messages."
+        DEFVAL { 30 }
+        ::= { tripPeerEntry 15 }
+
+    tripPeerMaxPurgeTime OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..65535)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Indicates the interval that the LS MUST maintain routes
+            marked as withdrawn in its database."
+        DEFVAL { 10 }
+        ::= { tripPeerEntry 16 }
+
+    tripPeerDisableTime OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..65535)
+        UNITS       "Seconds"
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "Indicate the interval that the TRIP module of the remote
+            peer LS MUST be disabled while routes originated by the
+            local LS with high sequence numbers can be removed."
+        DEFVAL { 180 }
+        ::= { tripPeerEntry 17 }
+
+    tripPeerLearned OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates whether this entry was learned or
+            configured."
+        DEFVAL { false }
+        ::= { tripPeerEntry 18 }
+
+    tripPeerStorage OBJECT-TYPE
+        SYNTAX       StorageType
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+           "The storage type for this conceptual row.  Conceptual
+           rows having the value 'permanent' need not allow write-
+           access to any columnar objects in the row. It is not a
+           requirement that this storage be non volatile."
+        DEFVAL { nonVolatile }
+        ::= { tripPeerEntry 19 }
+
+    tripPeerRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+            "The row status of the entry. This object is REQUIRED to
+            create or delete rows remotely by a manager. If the
+            instance already exists for a particular applIndex, the
+            row create operation will fail.
+
+            The value of this object has no effect on whether
+            other objects in this conceptual row can be modified.
+
+            Entries in this table can be learned by the TRIP
+            application, or provisioned through this table."
+        ::= { tripPeerEntry 20 }
+
+ --
+ -- TripPeerStatisticsTable
+ --
+
+    tripPeerStatisticsTable   OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripPeerStatisticsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The TRIP peer stats table. This table contains one
+            entry per remote TRIP peer, and statistics related to the
+            connection with the remote peer. The objects in this
+            table are volatile."
+        ::= { tripMIBObjects 5 }
+
+    tripPeerStatisticsEntry OBJECT-TYPE
+        SYNTAX      TripPeerStatisticsEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Entry containing information about the connection with
+            a TRIP peer."
+        AUGMENTS { tripPeerEntry }
+          ::= { tripPeerStatisticsTable 1 }
+
+    TripPeerStatisticsEntry ::= SEQUENCE {
+        tripPeerInUpdates                   Counter32,
+        tripPeerOutUpdates                  Counter32,
+        tripPeerInTotalMessages             Counter32,
+        tripPeerOutTotalMessages            Counter32,
+        tripPeerFsmEstablishedTransitions   Counter32,
+        tripPeerFsmEstablishedTime          DateAndTime,
+        tripPeerInUpdateElapsedTime         TimeInterval,
+        tripPeerStateChangeTime             TimeStamp
+    }
+
+     tripPeerInUpdates OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of TRIP update messages received from this
+            remote peer since the last restart of this location
+            server."
+        ::= { tripPeerStatisticsEntry 1 }
+
+    tripPeerOutUpdates OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of TRIP update messages sent to this remote
+            peer since the last restart of this LS."
+        ::= { tripPeerStatisticsEntry 2 }
+
+    tripPeerInTotalMessages OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of TRIP messages received from the
+            remote peer on this connection since the last restart
+            of this LS."
+        ::= { tripPeerStatisticsEntry 3 }
+
+    tripPeerOutTotalMessages OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The total number of outgoing TRIP messages sent to the
+            remote peer since the last restart of this LS."
+        ::= { tripPeerStatisticsEntry 4 }
+
+    tripPeerFsmEstablishedTransitions OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The number of times the remote peer has transitioned
+            into the established state since the last restart of this
+            LS."
+        ::= { tripPeerStatisticsEntry 5 }
+
+    tripPeerFsmEstablishedTime OBJECT-TYPE
+        SYNTAX      DateAndTime
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates the time and date that this remote peer entered
+            the 'established' state."
+        ::= { tripPeerStatisticsEntry 6 }
+
+    tripPeerInUpdateElapsedTime OBJECT-TYPE
+        SYNTAX      TimeInterval
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Elapsed time in hundredths of seconds since the last
+            TRIP update message was received from this remote peer."
+        ::= { tripPeerStatisticsEntry 7 }
+
+    tripPeerStateChangeTime OBJECT-TYPE
+        SYNTAX       TimeStamp
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "The value of sysUpTime when the last state change of
+            tripPeerState took place."
+        ::= { tripPeerStatisticsEntry 8 }
+
+ -- TRIP Received Route Table.  This table contains
+ -- all routes from all sources. Each entry consists
+ -- of a route and its associated path attributes.
+
+    tripRouteTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripRouteEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The TRIP route table containing information about
+            reachable routes that are to be added to service by the
+            receiving LS. The objects in this table are volatile
+            and are refreshed when this LS rediscovers its route
+            table."
+        ::= { tripMIBObjects 6 }
+
+    tripRouteEntry OBJECT-TYPE
+        SYNTAX      TripRouteEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Information about a route to a called destination."
+        INDEX { applIndex,
+                tripRouteAppProtocol,
+                tripRouteAddressFamily,
+                tripRouteAddress,
+                tripRoutePeer
+                }
+        ::= { tripRouteTable 1 }
+
+    TripRouteEntry ::= SEQUENCE {
+        tripRouteAppProtocol                 TripAppProtocol,
+        tripRouteAddressFamily               TripAddressFamily,
+        tripRouteAddress                     OCTET STRING,
+        tripRoutePeer                        TripId,
+        tripRouteTRIBMask                    BITS,
+        tripRouteAddressSequenceNumber       Unsigned32,
+        tripRouteAddressOriginatorId         TripId,
+        tripRouteNextHopServerIAddrType      InetAddressType,
+        tripRouteNextHopServer               InetAddress,
+        tripRouteNextHopServerPort           InetPortNumber,
+        tripRouteNextHopServerItad           TripItad,
+        tripRouteMultiExitDisc               Unsigned32,
+        tripRouteLocalPref                   Unsigned32,
+        tripRouteAdvertisementPath           OCTET STRING,
+        tripRouteRoutedPath                  OCTET STRING,
+        tripRouteAtomicAggregate             TruthValue,
+        tripRouteUnknown                     OCTET STRING,
+        tripRouteWithdrawn                   TruthValue,
+        tripRouteConverted                   TruthValue,
+        tripRouteReceivedTime                TimeStamp
+        }
+
+    tripRouteAppProtocol OBJECT-TYPE
+        SYNTAX      TripAppProtocol
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The protocol for which this entry of the routing table
+            is maintained."
+        ::= { tripRouteEntry 1 }
+
+    tripRouteAddressFamily OBJECT-TYPE
+        SYNTAX      TripAddressFamily
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Specifies the type of address for the destination
+            route."
+        ::= { tripRouteEntry 2 }
+
+    tripRouteAddress OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(1..105))
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "This is the address (prefix) of the family type given
+            by Address Family of the destination. It is the prefix
+            of addresses reachable from this gateway via the next
+            hop server. The SIZE value of 105 has been assigned due
+            to the sub identifier of object types length limitation
+            as defined in SMIv2."
+        REFERENCE
+            "RFC 3219, section 5.1.1.1."
+        ::= { tripRouteEntry 3 }
+
+    tripRoutePeer OBJECT-TYPE
+        SYNTAX      TripId
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The identifier of the peer where the route information
+            was learned."
+        ::= { tripRouteEntry 4 }
+
+     tripRouteTRIBMask OBJECT-TYPE
+        SYNTAX      BITS {
+                     adjTribIns(0),
+                     extTrib(1),
+                     locTrib(2),
+                     adjTribOut(3)
+
+                     }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates which Telephony Routing Information Base (TRIB)
+            this entry belongs to. This is
+            a bit-map of possible types. If the bit has a value of
+            1, then the entry is a member of the corresponding TRIB
+            type. If the bit has a value of 0 then the entry is not
+            a member of the TRIP type. The various bit positions
+            are:
+
+            0    adjTribIns     The entry is of type adj-TRIBs-ins,
+                                stores routing information that has
+                                been learned from inbound UPDATE
+                                messages.
+            1    extTrib        The entry is of type ext-TRIB, the
+                                best route for a given destination.
+            2    locTrib        The entry is of type loc-TRIB contains
+                                the local TRIP routing information
+                                that the LS has selected.
+            3    adjTribOut     The entry is of type adj-TRIBs-out,
+                                stores the information that the local
+                                LS has selected for advertisement to
+                                its external peers."
+        REFERENCE
+            "RFC 3291, section 3.5."
+        ::= { tripRouteEntry 5 }
+
+    tripRouteAddressSequenceNumber OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates the version of the destination route
+            originated by the LS identified by
+            tripRouteAddressOriginatorId intra-domain attribute."
+        ::= { tripRouteEntry 6 }
+
+    tripRouteAddressOriginatorId OBJECT-TYPE
+        SYNTAX      TripId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This is an intra-domain attribute indicating the
+            internal LS that originated the route into the ITAD."
+        ::= { tripRouteEntry 7 }
+
+    tripRouteNextHopServerIAddrType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The type of Inet Address of the tripRouteNextHopServer."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripRouteEntry 8 }
+
+    tripRouteNextHopServer OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates the next hop that messages of a given protocol
+            destined for tripRouteAddress SHOULD be sent to. The type
+            of this address is determined by the value of the
+            tripRouteNextHopServerIAddrType object."
+        ::= { tripRouteEntry 9 }
+
+    tripRouteNextHopServerPort OBJECT-TYPE
+        SYNTAX      InetPortNumber
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The port of the next hop server that this route
+            will use."
+        ::= { tripRouteEntry 10 }
+
+    tripRouteNextHopServerItad OBJECT-TYPE
+        SYNTAX      TripItad
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates the domain of the next hop."
+        ::= { tripRouteEntry 11 }
+
+    tripRouteMultiExitDisc OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..4294967295)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The Multiple Exit Discriminator allows an LS to
+            discriminate between, and indicate preference for,
+            otherwise similar routes to a neighbouring domain.
+            A higher value represents a more preferred routing
+            object."
+        REFERENCE
+            "RFC 3219, section 5.8"
+        ::= { tripRouteEntry 12 }
+
+    tripRouteLocalPref OBJECT-TYPE
+        SYNTAX      Unsigned32 (0..4294967295)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicated the local LS's degree of preference for an
+            advertised route destination."
+        REFERENCE
+            "RFC 3219, section 4.3.4.7"
+        ::= { tripRouteEntry 13 }
+
+    tripRouteAdvertisementPath OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..252))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Identifies the sequence of domains through which this
+            advertisement has passed.
+
+            This object is probably best represented as sequence of
+            TripItads. For SMI compatibility, though, it is
+            represented as an OCTET STRING. This object is a sequence
+            of ITADs where each set of 4 octets corresponds to a TRIP
+            ITAD in network byte order."
+        REFERENCE
+            "RFC 3219, section 4.3.4.4"
+        ::= { tripRouteEntry 14 }
+
+    tripRouteRoutedPath OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(4..252))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Identifies the ITADs through which messages sent using
+            this route would pass. These are a subset of
+            tripRouteAdvertisementPath.
+
+            This object is probably best represented as sequence of
+            TripItads. For SMI compatibility, though, it is
+            represented as OCTET STRING.  This object is a sequence
+            of ITADs where each set of 4 octets corresponds to a TRIP
+            ITAD in network byte order."
+        REFERENCE
+            "RFC 3219, section 4.3.4.5"
+        ::= { tripRouteEntry 15 }
+
+    tripRouteAtomicAggregate OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates that a route MAY traverse domains not listed
+            in tripRouteRoutedPath. If an LS selects the less
+            specific route from a set of overlapping routes, then
+            this value returns TRUE."
+        REFERENCE
+            "RFC 3219, section 4.3.4.6"
+        ::= { tripRouteEntry 16 }
+
+    tripRouteUnknown OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..255))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This object contains one or more attributes that were not
+            understood, and because they were transitive, were dropped
+            during aggregation. They take the format of a triple
+            <attribute type, attribute length, attribute value>, of
+            variable length. If no attributes were dropped, this
+            returns an OCTET STRING of size 0."
+        REFERENCE
+            "RFC 3219, sections 4.3.1, 4.3.2.3"
+        ::= { tripRouteEntry 17 }
+
+    tripRouteWithdrawn OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates if this route is to be removed from service
+            by the receiving LS."
+        ::= { tripRouteEntry 18 }
+
+    tripRouteConverted OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates if this route has been converted to a
+            different application protocol than it had originally."
+        ::= { tripRouteEntry 19 }
+
+    tripRouteReceivedTime OBJECT-TYPE
+        SYNTAX       TimeStamp
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+          "The value of sysUpTime when this route was received."
+        ::= { tripRouteEntry 20 }
+
+ --
+ -- TRIP Received Route Community Table.
+ --
+
+    tripRouteCommunityTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripRouteCommunityEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "A table containing a list of TRIP communities associated
+            with a route. Each instance of tripRouteTypeEntry that has
+            the tripRouteTypePeer object set to remote(2) has an
+            instance in the tripRouteTable as a parent. The objects
+            in this table are volatile and are refreshed after a
+            reboot."
+        REFERENCE
+            "RFC 3219, section 5.9."
+        ::= { tripMIBObjects 7 }
+
+    tripRouteCommunityEntry OBJECT-TYPE
+        SYNTAX      TripRouteCommunityEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Information about communities associated with a route.
+            An entry with a tripRouteAddress of 00 and a
+            tripRoutePeer of 0 refers to the local LS."
+        INDEX { applIndex,
+                tripRouteAppProtocol,
+                tripRouteAddressFamily,
+                tripRouteAddress,
+                tripRoutePeer,
+                tripRouteCommunityId
+              }
+        ::= { tripRouteCommunityTable 1 }
+
+    TripRouteCommunityEntry ::= SEQUENCE {
+         tripRouteCommunityId    TripCommunityId,
+         tripRouteCommunityItad  TripItad
+         }
+
+    tripRouteCommunityId OBJECT-TYPE
+        SYNTAX      TripCommunityId
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The community identifier."
+        ::= { tripRouteCommunityEntry 1 }
+
+    tripRouteCommunityItad OBJECT-TYPE
+        SYNTAX      TripItad
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The ITAD associated with this community."
+        ::= { tripRouteCommunityEntry 2 }
+
+ --
+ -- tripItadTopologyTable
+ --
+
+    tripItadTopologyTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripItadTopologyEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The sequence of link connections between peers within an
+            ITAD. The objects in this table are volatile and are
+            refreshed after a reboot."
+        ::= { tripMIBObjects 8 }
+
+    tripItadTopologyEntry OBJECT-TYPE
+        SYNTAX      TripItadTopologyEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Information about a peer of the LS identified by
+            tripItadTopologyOrigId."
+        INDEX { applIndex, tripItadTopologyOrigId }
+        ::= { tripItadTopologyTable 1 }
+
+    TripItadTopologyEntry ::= SEQUENCE {
+                tripItadTopologyOrigId    TripId,
+                tripItadTopologySeqNum    Unsigned32
+            }
+
+    tripItadTopologyOrigId OBJECT-TYPE
+        SYNTAX      TripId
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Indicates the internal LS that originated the ITAD
+            topology information into the ITAD."
+        ::= { tripItadTopologyEntry 1 }
+
+    tripItadTopologySeqNum OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Indicates the version of the ITAD topology originated
+            by the LS identified by tripItadTopologyOrigId."
+        ::= { tripItadTopologyEntry 2 }
+
+ --
+ -- tripItadTopologyIdTable
+ --
+
+    tripItadTopologyIdTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF TripItadTopologyIdEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "The list of other LS's within the ITAD domain that the
+            LS identified by tripItadTopologyOrigId is currently
+            peering. Each instance of tripItadTopologyIdEntry has an
+            instance in the tripItadTopologyTable as a parent. The
+            objects in this table are volatile and are refreshed
+            after a reboot."
+        ::= { tripMIBObjects 9 }
+
+    tripItadTopologyIdEntry OBJECT-TYPE
+        SYNTAX      TripItadTopologyIdEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Information about a peer to the LS identified by
+            tripItadTopologyOrigId."
+        INDEX { applIndex,
+                tripItadTopologyOrigId,
+                tripItadTopologyId }
+        ::= { tripItadTopologyIdTable 1 }
+
+    TripItadTopologyIdEntry ::= SEQUENCE {
+                tripItadTopologyId            TripId
+            }
+
+    tripItadTopologyId OBJECT-TYPE
+        SYNTAX      TripId
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The index into this entry. Indicates the other location
+            servers within the ITAD domain that this LS identified
+            by tripItadTopologyOrigId is currently peering."
+        ::= { tripItadTopologyIdEntry 1 }
+
+ --
+ -- Notification objects
+ --
+
+    tripNotifApplIndex    OBJECT-TYPE
+        SYNTAX     Integer32 (1..2147483647)
+        MAX-ACCESS accessible-for-notify
+        STATUS     current
+        DESCRIPTION
+             "This object contains the application Index. It is used
+             to bind this notification with a specific instance of
+             TRIP entity."
+        REFERENCE
+            "RFC 2788, section 3."
+        ::= { tripMIBNotifObjects 1 }
+
+    tripNotifPeerAddrInetType OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The type of Inet Address of the tripNotifPeerAddr."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripMIBNotifObjects 2 }
+
+    tripNotifPeerAddr OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The IP address of this entry's TRIP peer LS. This object
+            contains the value of tripPeerRemoteAddr. The type of this
+            address is determined by the value of the
+            tripNotifPeerAddrInetType object."
+        REFERENCE
+            "RFC 3291, section 3."
+        ::= { tripMIBNotifObjects 3 }
+
+    tripNotifPeerErrCode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        messageHeader(1),
+                        openMessage(2),
+                        updateMessage(3),
+                        holdTimerExpired(4),
+                        finiteStateMachine(5),
+                        cease(6),
+                        tripNotification(7)
+                    }
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "Notification message of TRIP error. The meaning of this
+            value is applicable to the following functions:
+
+            messageHeader(1)
+             - All errors detected while processing the TRIP message
+               header.
+
+            openMessage(2)
+             - All errors detected while processing the OPEN message.
+
+            updateMessage(3)
+             - All errors detected while processing the UPDATE
+               message.
+
+            holdTimerExpired(4)
+             - A notification generated when the hold timer expires.
+
+            finiteStateMachine(5)
+             - All errors detected by the TRIP Finite State Machine.
+
+            cease(6)
+             - Any fatal error condition that the rest of the values
+               do not cover.
+
+            tripNotification(7)
+             - Any error encountered while sending a notification
+               message."
+       ::= { tripMIBNotifObjects 4 }
+
+    tripNotifPeerErrSubcode OBJECT-TYPE
+        SYNTAX      Unsigned32 (1..2147483647)
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "The sub error code associated with error code. The
+
+            meaning of this value is dependent on the value of
+            tripNotifPeerErrCode.
+
+            Message Header (1) Error Subcodes:
+            1 - Bad Message Length.
+            2 - Bad Message Type.
+
+            OPEN Message (2) Error Subcodes:
+            1 - Unsupported Version Number.
+            2 - Bad Peer ITAD.
+            3 - Bad TRIP Identifier.
+            4 - Unsupported Optional Parameter.
+            5 - Unacceptable Hold Time.
+            6 - Unsupported Capability.
+            7 - Capability Mismatch.
+
+            UPDATE Message (3) Error Subcodes:
+            1 - Malformed Attribute List.
+            2 - Unrecognized Well-known Attribute.
+            3 - Missing Well-known Mandatory Attribute.
+            4 - Attribute Flags Error.
+            5 - Attribute Length Error.
+            6 - Invalid Attribute."
+       ::= { tripMIBNotifObjects 5 }
+
+ --
+ -- Notifications
+ --
+    tripConnectionEstablished NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr
+                }
+        STATUS  current
+        DESCRIPTION
+            "The TRIP Connection Established event is generated when
+            the TRIP finite state machine enters the ESTABLISHED
+            state."
+        ::= { tripMIBNotifications 1 }
+
+    tripConnectionDropped NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr
+                }
+        STATUS  current
+        DESCRIPTION
+            "The TRIP Connection Dropped event is generated when the
+
+            TRIP finite state machine leaves the ESTABLISHED state."
+        ::= { tripMIBNotifications 2 }
+
+    tripFSM NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr,
+                  tripNotifPeerErrCode,
+                  tripNotifPeerErrSubcode,
+                  tripPeerState
+                }
+        STATUS  current
+        DESCRIPTION
+            "The trip FSM Event is generated when any error is
+            detected by the TRIP Finite State Machine."
+        ::= { tripMIBNotifications 3 }
+
+    tripOpenMessageError NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr,
+                  tripNotifPeerErrCode,
+                  tripNotifPeerErrSubcode,
+                  tripPeerState
+                }
+        STATUS  current
+        DESCRIPTION
+            "Errors detected while processing the OPEN message."
+        ::= { tripMIBNotifications 4 }
+
+    tripUpdateMessageError NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr,
+                  tripNotifPeerErrCode,
+                  tripNotifPeerErrSubcode,
+                  tripPeerState
+                }
+        STATUS  current
+        DESCRIPTION
+            "Errors detected while processing the UPDATE message."
+        ::= { tripMIBNotifications 5 }
+
+    tripHoldTimerExpired NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr,
+                  tripNotifPeerErrCode,
+                  tripNotifPeerErrSubcode,
+                  tripPeerState
+                }
+        STATUS  current
+        DESCRIPTION
+            "The system does not receive successive messages within
+            the period specified by the negotiated Hold Time."
+        ::= { tripMIBNotifications 6 }
+
+    tripConnectionCollision NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex }
+        STATUS  current
+        DESCRIPTION
+            "A pair of LSs tried to simultaneously to establish a
+            transport connection to each other."
+        ::= { tripMIBNotifications 7 }
+
+    tripCease NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex,
+                  tripNotifPeerAddrInetType,
+                  tripNotifPeerAddr,
+                  tripNotifPeerErrCode,
+                  tripNotifPeerErrSubcode,
+                  tripPeerState
+                }
+        STATUS  current
+        DESCRIPTION
+            "A TRIP peer MAY choose at any given time to close its TRIP
+            connection by sending this notification message. However,
+            the Cease notification message MUST NOT be used when a
+            fatal error occurs."
+        ::= { tripMIBNotifications 8 }
+
+    tripNotificationErr NOTIFICATION-TYPE
+        OBJECTS { tripNotifApplIndex }
+        STATUS  current
+        DESCRIPTION
+            "Generated if there is an error detected in a TRIP
+            notification message sent with another cause. Note that
+            the TRIP notification referred to in this object is not
+            an SNMP notification, it is a specific message described
+            in the TRIP specification."
+        REFERENCE
+            "RFC 3219, section  6.4."
+        ::= { tripMIBNotifications 9 }
+
+    --
+
+    -- Compliance Statements
+    --
+
+    tripMIBFullCompliance MODULE-COMPLIANCE
+        STATUS     current
+        DESCRIPTION
+             "The compliance statement for TRIP entities that
+             implement this MIB module in read-write mode, such
+             that it can be used for both monitoring and configuring
+             the TRIP entity.
+
+             There is one INDEX object that cannot be represented in
+             the form of OBJECT clauses in SMIv2, but for which there
+             is a compliance requirement, expressed in OBJECT clause
+             form in this description:
+
+             -- OBJECT      tripRouteTypeAddrInetType
+             -- SYNTAX      InetAddressType (ipv4(1), ipv6(2),
+             --                              ipv4z(3), ipv6z(4))
+             -- DESCRIPTION
+             --     This MIB requires support for global and
+             --     non-global ipv4 and ipv6 addresses.
+             --
+             -- OBJECT      tripRouteTypeAddr
+             -- SYNTAX      InetAddress (SIZE (4 | 8 | 16 | 20))
+             -- DESCRIPTION
+             --     This MIB requires support for global and
+             --     non-global IPv4 and IPv6 addresses.
+             --
+             "
+
+        MODULE -- this module
+             MANDATORY-GROUPS { tripConfigGroup,
+                                tripPeerTableConfigGroup,
+                                tripRouteGroup,
+                                tripItadTopologyGroup,
+                                tripPeerTableStatsGroup }
+
+        GROUP tripNotificationGroup
+        DESCRIPTION
+            "This group is OPTIONAL. A TRIP entity can choose not to
+            send any notifications. If this group is implemented,
+            the tripNotifObjectGroup MUST also be implemented."
+
+        GROUP tripNotifObjectGroup
+        DESCRIPTION
+            "This group is OPTIONAL. A TRIP entity can choose not to
+            send any notifications. If this group is implemented,
+            the tripNotificationGroup MUST also be implemented."
+
+        OBJECT       tripSupportedCommunityRowStatus
+        SYNTAX       RowStatus { active(1) }
+        WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+        DESCRIPTION
+           "Support for createAndWait and notInService is not
+           required."
+
+        OBJECT       tripPeerRowStatus
+        SYNTAX       RowStatus { active(1) }
+        WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+        DESCRIPTION
+           "Support for createAndWait and notInService is not
+           required."
+
+        MODULE NETWORK-SERVICES-MIB
+             MANDATORY-GROUPS { applRFC2788Group }
+        ::= { tripMIBCompliances 1 }
+    tripMIBReadOnlyCompliance MODULE-COMPLIANCE
+        STATUS     current
+        DESCRIPTION
+             "The compliance statement for TRIP entities that
+             implement this MIB module in read only mode. Such TRIP
+             entities can then only be monitored, but not be
+             configured via this MIB module.
+
+             In read-only mode, the manager will not be able to add,
+             remove or modify rows to any table, however the TRIP
+             application may modify, remove or add rows to a table.
+
+             There is one INDEX object that cannot be represented in
+             the form of OBJECT clauses in SMIv2, but for which there
+             is a compliance requirement, expressed in OBJECT clause
+             form in this description:
+
+             -- OBJECT      tripRouteTypeAddrInetType
+             -- SYNTAX      InetAddressType (ipv4(1), ipv6(2),
+             --                              ipv4z(3), ipv6z(4))
+             -- DESCRIPTION
+             --     This MIB requires support for global and
+             --     non-global ipv4 and ipv6 addresses.
+             --
+             -- OBJECT      tripRouteTypeAddr
+             -- SYNTAX      InetAddress (SIZE (4 | 8 | 16 | 20))
+             -- DESCRIPTION
+             --     This MIB requires support for global and
+
+             --     non-global IPv4 and IPv6 addresses.
+             --
+             "
+
+        MODULE -- this module
+             MANDATORY-GROUPS { tripConfigGroup,
+                                tripPeerTableConfigGroup,
+                                tripRouteGroup,
+                                tripItadTopologyGroup,
+                                tripPeerTableStatsGroup }
+
+        GROUP tripNotificationGroup
+        DESCRIPTION
+            "This group is OPTIONAL. A TRIP entity can choose not to
+            send any notifications. If this group is implemented,
+            the tripNotifObjectGroup MUST also be implemented."
+
+        GROUP tripNotifObjectGroup
+        DESCRIPTION
+            "This group is OPTIONAL. A TRIP entity can choose not to
+            send any notifications. If this group is implemented,
+            the tripNotificationGroup MUST also be implemented."
+        OBJECT       tripCfgItad
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripCfgAdminStatus
+        MIN-ACCESS   not-accessible
+        DESCRIPTION
+           "Object is not needed when implemented in read-only mode."
+
+        OBJECT       tripCfgPort
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripCfgMinItadOriginationInterval
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripCfgMinRouteAdvertisementInterval
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripCfgMaxPurgeTime
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripCfgDisableTime
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripCfgStorage
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripSupportedCommunityItad
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripSupportedCommunityStorage
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT      tripSupportedCommunityRowStatus
+        SYNTAX      RowStatus { active(1) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+           "Write access is not required, and active is the only
+           status that needs to be supported."
+
+        OBJECT       tripPeerAdminStatus
+        MIN-ACCESS   not-accessible
+        DESCRIPTION
+           "Object is not needed when implemented in read-only mode."
+
+        OBJECT       tripPeerConnectRetryInterval
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripPeerMaxRetryInterval
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripPeerHoldTimeConfigured
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripPeerKeepAliveConfigured
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripPeerMaxPurgeTime
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripPeerDisableTime
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT       tripPeerStorage
+        MIN-ACCESS   read-only
+        DESCRIPTION
+           "Write access is not required."
+
+        OBJECT      tripPeerRowStatus
+        SYNTAX      RowStatus { active(1) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+           "Write access is not required, and active is the only
+           status that needs to be supported."
+        MODULE NETWORK-SERVICES-MIB
+             MANDATORY-GROUPS { applRFC2788Group }
+        ::= { tripMIBCompliances 2 }
+
+ --
+ -- Object and event conformance groups
+ --
+
+    tripConfigGroup OBJECT-GROUP
+        OBJECTS {
+            tripCfgProtocolVersion,
+            tripCfgItad,
+            tripCfgIdentifier,
+            tripCfgOperStatus,
+            tripCfgAdminStatus,
+            tripCfgAddrIAddrType,
+            tripCfgAddr,
+            tripCfgPort,
+            tripCfgMinItadOriginationInterval,
+            tripCfgMinRouteAdvertisementInterval,
+            tripCfgMaxPurgeTime,
+            tripCfgDisableTime,
+            tripCfgSendReceiveMode,
+            tripCfgStorage,
+            tripSupportedCommunityItad,
+            tripSupportedCommunityStorage,
+            tripRouteTypePeer,
+            tripSupportedCommunityRowStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The global objects for configuring trip."
+        ::= { tripMIBGroups 1 }
+
+    tripPeerTableConfigGroup OBJECT-GROUP
+        OBJECTS {
+            tripPeerIdentifier,
+            tripPeerState,
+            tripPeerAdminStatus,
+            tripPeerNegotiatedVersion,
+            tripPeerSendReceiveMode,
+            tripPeerRemoteItad,
+            tripPeerConnectRetryInterval,
+            tripPeerMaxRetryInterval,
+            tripPeerHoldTime,
+            tripPeerKeepAlive,
+            tripPeerHoldTimeConfigured,
+            tripPeerKeepAliveConfigured,
+            tripPeerMaxPurgeTime,
+            tripPeerDisableTime,
+            tripPeerLearned,
+            tripPeerStorage,
+            tripPeerRowStatus
+            }
+        STATUS current
+        DESCRIPTION
+            "The global objects for configuring the TRIP peer
+            table."
+        ::= { tripMIBGroups 2 }
+
+    tripPeerTableStatsGroup OBJECT-GROUP
+        OBJECTS {
+            tripPeerInUpdates,
+            tripPeerOutUpdates,
+            tripPeerInTotalMessages,
+            tripPeerOutTotalMessages,
+            tripPeerFsmEstablishedTransitions,
+            tripPeerFsmEstablishedTime,
+            tripPeerInUpdateElapsedTime,
+            tripPeerStateChangeTime
+            }
+        STATUS current
+        DESCRIPTION
+            "The global statistics the TRIP peer table."
+        ::= { tripMIBGroups 3 }
+
+    tripRouteGroup OBJECT-GROUP
+        OBJECTS {
+            tripRouteTRIBMask,
+            tripRouteAddressSequenceNumber,
+            tripRouteAddressOriginatorId,
+            tripRouteNextHopServerIAddrType,
+            tripRouteNextHopServer,
+            tripRouteNextHopServerPort,
+            tripRouteNextHopServerItad,
+            tripRouteMultiExitDisc,
+            tripRouteLocalPref,
+            tripRouteAdvertisementPath,
+            tripRouteRoutedPath,
+            tripRouteAtomicAggregate,
+            tripRouteUnknown,
+            tripRouteWithdrawn,
+            tripRouteConverted,
+            tripRouteReceivedTime,
+            tripRouteCommunityItad
+            }
+        STATUS current
+        DESCRIPTION
+            "The global objects for configuring route attribute."
+        ::= { tripMIBGroups 4 }
+    tripItadTopologyGroup OBJECT-GROUP
+        OBJECTS {
+            tripItadTopologySeqNum,
+            tripItadTopologyId
+            }
+        STATUS current
+        DESCRIPTION
+            "The objects that define the TRIP ITAD topology."
+        ::= { tripMIBGroups 5 }
+
+    tripNotificationGroup NOTIFICATION-GROUP
+        NOTIFICATIONS {
+
+            tripConnectionEstablished,
+            tripConnectionDropped,
+            tripFSM,
+            tripOpenMessageError,
+            tripUpdateMessageError,
+            tripHoldTimerExpired,
+            tripConnectionCollision,
+            tripCease,
+            tripNotificationErr
+        }
+        STATUS  current
+        DESCRIPTION
+             "A collection of notifications defined for TRIP."
+        ::= { tripMIBGroups 6 }
+
+    tripNotifObjectGroup OBJECT-GROUP
+        OBJECTS {
+            tripNotifApplIndex,
+            tripNotifPeerAddrInetType,
+            tripNotifPeerAddr,
+            tripNotifPeerErrCode,
+            tripNotifPeerErrSubcode
+            }
+        STATUS current
+        DESCRIPTION
+            "The collection of objects that specify information for
+            TRIP notifications."
+        ::= { tripMIBGroups 7 }
+
+END
diff --git a/snmp_builder/mibs/TRIP-TC-MIB.mib b/snmp_builder/mibs/TRIP-TC-MIB.mib
new file mode 100644
index 0000000..67142bf
--- /dev/null
+++ b/snmp_builder/mibs/TRIP-TC-MIB.mib
@@ -0,0 +1,132 @@
+TRIP-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    Unsigned32,
+    Integer32,
+    mib-2
+        FROM SNMPv2-SMI            -- [RFC2578]
+
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;            -- [RFC2579]
+
+tripTC MODULE-IDENTITY
+    LAST-UPDATED   "200409020000Z" -- Sep 02, 2004
+    ORGANIZATION   "IETF IPTel Working Group.
+        Mailing list: iptel@lists.bell-labs.com"
+    CONTACT-INFO
+       "Co-editor  David Zinman
+        postal:    265 Ridley Blvd.
+                   Toronto ON, M5M 4N8
+                   Canada
+        email:     dzinman@rogers.com
+        phone:     +1 416 433 4298
+
+        Co-editor: David Walker
+                   Sedna Wireless Inc.
+        postal:    495 March Road, Suite 500
+                   Ottawa, ON K2K 3G1
+                   Canada
+        email:     david.walker@sedna-wireless.com
+        phone:     +1 613 878 8142
+
+        Co-editor   Jianping Jiang
+                    Syndesis Limited
+        postal:     30 Fulton Way
+                    Richmond Hill, ON L4B 1J5
+                    Canada
+
+        email:      jjiang@syndesis.com
+        phone:      +1 905 886-7818 x2515
+        "
+    DESCRIPTION
+        "Initial version of TRIP (Telephony Routing Over IP)
+        MIB Textual Conventions module used by other
+
+        TRIP-related MIB Modules.
+
+        Copyright (C) The Internet Society (2004). This version of
+        this MIB module is part of RFC 3872, see the RFC itself
+        for full legal notices."
+    REVISION      "200409020000Z" -- Sep 02, 2004
+    DESCRIPTION
+        "The initial version, Published as RFC 3872."
+    ::= { mib-2 115 }
+
+--
+-- Textual Conventions
+--
+
+TripItad ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+       "The values for identifying the IP Telephony
+       Administrative Domain (ITAD)."
+    SYNTAX Unsigned32 (0..4294967295)
+
+TripId ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+       "The TRIP Identifier uniquely identifies a LS within its
+       ITAD. It is a 4 octet unsigned integer that may, but not
+       necessarily, represent the IPv4 address of a Location
+       Server.  Where bytes 1-4 of the Unsigned32 represent
+       1-4 bytes of the IPv4 address in network-byte order. For
+       an IPv6 network, TripId will not represent the IPv6
+       address."
+    SYNTAX Unsigned32 (0..4294967295)
+
+TripAddressFamily ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "A type of address for a TRIP route. Address families
+        defined within this MIB module are:
+
+        Code              Address Family
+        1                 Decimal Routing Numbers
+        2                 PentaDecimal Routing Numbers
+        3                 E.164 Numbers
+        255               An other type of address family"
+    SYNTAX INTEGER
+        { decimal(1), pentadecimal(2), e164(3), other(255) }
+
+TripAppProtocol ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "The application protocol used for communication with TRIP
+        Location Servers. Protocols defined in this MIB Module
+        are:
+
+        Code              Protocol
+        1                 SIP
+        2                 H.323-H.225.0-Q.931
+        3                 H.323-H.225.0-RAS
+        4                 H.323-H.225.0-Annex-G
+        255               An other type of application protocol"
+    SYNTAX INTEGER
+        { sip(1), q931(2), ras(3), annexG(4), other(255) }
+
+TripCommunityId ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+       "The range of legal values for a TRIP Community
+       Identifier."
+    SYNTAX Unsigned32 (0..4294967295)
+
+TripProtocolVersion ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+       "The version number of the TRIP protocol."
+    SYNTAX Integer32 (1..255)
+
+TripSendReceiveMode ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+       "The operational mode of the TRIP application. Possible
+       values are:
+          1 - Send Receive mode
+          2 - Send only mode
+          3 - Receive Only mode"
+    SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) }
+
+END
diff --git a/snmp_builder/mibs/TUNNEL-MIB.mib b/snmp_builder/mibs/TUNNEL-MIB.mib
new file mode 100644
index 0000000..5f9596b
--- /dev/null
+++ b/snmp_builder/mibs/TUNNEL-MIB.mib
@@ -0,0 +1,738 @@
+TUNNEL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, transmission,
+    Integer32, IpAddress    FROM SNMPv2-SMI          -- [RFC2578]
+
+    RowStatus, StorageType  FROM SNMPv2-TC           -- [RFC2579]
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP            FROM SNMPv2-CONF         -- [RFC2580]
+
+    InetAddressType,
+    InetAddress             FROM INET-ADDRESS-MIB    -- [RFC4001]
+
+    IPv6FlowLabelOrAny      FROM IPV6-FLOW-LABEL-MIB -- [RFC3595]
+
+    ifIndex,
+    InterfaceIndexOrZero    FROM IF-MIB              -- [RFC2863]
+
+    IANAtunnelType          FROM IANAifType-MIB;     -- [IFTYPE]
+
+tunnelMIB MODULE-IDENTITY
+    LAST-UPDATED "200505160000Z" -- May 16, 2005
+    ORGANIZATION "IETF IP Version 6 (IPv6) Working Group"
+    CONTACT-INFO
+            " Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA  98052-6399
+              EMail: dthaler@microsoft.com"
+    DESCRIPTION
+            "The MIB module for management of IP Tunnels,
+            independent of the specific encapsulation scheme in
+            use.
+
+            Copyright (C) The Internet Society (2005).  This
+            version of this MIB module is part of RFC 4087;  see
+            the RFC itself for full legal notices."
+
+    REVISION     "200505160000Z" -- May 16, 2005
+    DESCRIPTION
+            "IPv4-specific objects were deprecated, including
+            tunnelIfLocalAddress, tunnelIfRemoteAddress, the
+            tunnelConfigTable, and the tunnelMIBBasicGroup.
+
+            Added IP version-agnostic objects that should be used
+            instead, including tunnelIfAddressType,
+            tunnelIfLocalInetAddress, tunnelIfRemoteInetAddress,
+            the tunnelInetConfigTable, and the
+            tunnelIMIBInetGroup.
+
+            The new tunnelIfLocalInetAddress and
+            tunnelIfRemoteInetAddress objects are read-write,
+            rather than read-only.
+
+            Updated DESCRIPTION clauses of existing version-
+            agnostic objects (e.g., tunnelIfTOS) that contained
+            IPv4-specific text to cover IPv6 as well.
+
+            Added tunnelIfFlowLabel for tunnels over IPv6.
+
+            The encapsulation method was previously an INTEGER
+            type, and is now an IANA-maintained textual
+            convention.
+
+            Published as RFC 4087."
+    REVISION     "199908241200Z" -- August 24, 1999
+    DESCRIPTION
+            "Initial version, published as RFC 2667."
+    ::= { transmission 131 }
+
+tunnelMIBObjects OBJECT IDENTIFIER ::= { tunnelMIB 1 }
+
+tunnel      OBJECT IDENTIFIER ::= { tunnelMIBObjects 1 }
+
+-- the IP Tunnel MIB-Group
+--
+-- a collection of objects providing information about
+-- IP Tunnels
+
+tunnelIfTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TunnelIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on
+            configured tunnels."
+    ::= { tunnel 1 }
+
+tunnelIfEntry OBJECT-TYPE
+    SYNTAX     TunnelIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information
+            on a particular configured tunnel."
+    INDEX      { ifIndex }
+    ::= { tunnelIfTable 1 }
+
+TunnelIfEntry ::= SEQUENCE {
+    tunnelIfLocalAddress            IpAddress,   -- deprecated
+    tunnelIfRemoteAddress           IpAddress,   -- deprecated
+    tunnelIfEncapsMethod            IANAtunnelType,
+    tunnelIfHopLimit                Integer32,
+    tunnelIfSecurity                INTEGER,
+    tunnelIfTOS                     Integer32,
+    tunnelIfFlowLabel               IPv6FlowLabelOrAny,
+    tunnelIfAddressType             InetAddressType,
+    tunnelIfLocalInetAddress        InetAddress,
+    tunnelIfRemoteInetAddress       InetAddress,
+    tunnelIfEncapsLimit             Integer32
+}
+
+tunnelIfLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel
+            (i.e., the source address used in the outer IP
+            header), or 0.0.0.0 if unknown or if the tunnel is
+            over IPv6.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelIfLocalInetAddress."
+    ::= { tunnelIfEntry 1 }
+
+tunnelIfRemoteAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel
+            (i.e., the destination address used in the outer IP
+            header), or 0.0.0.0 if unknown, or an IPv6 address, or
+
+            the tunnel is not a point-to-point link (e.g., if it
+            is a 6to4 tunnel).
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelIfRemoteInetAddress."
+    ::= { tunnelIfEntry 2 }
+
+tunnelIfEncapsMethod OBJECT-TYPE
+    SYNTAX     IANAtunnelType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The encapsulation method used by the tunnel."
+    ::= { tunnelIfEntry 3 }
+
+tunnelIfHopLimit OBJECT-TYPE
+    SYNTAX     Integer32 (0 | 1..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
+            header.  A value of 0 indicates that the value is
+            copied from the payload's header."
+    ::= { tunnelIfEntry 4 }
+
+tunnelIfSecurity OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   none(1),   -- no security
+                   ipsec(2),  -- IPsec security
+                   other(3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The method used by the tunnel to secure the outer IP
+            header.  The value ipsec indicates that IPsec is used
+            between the tunnel endpoints for authentication or
+            encryption or both.  More specific security-related
+            information may be available in a MIB module for the
+            security protocol in use."
+    ::= { tunnelIfEntry 5 }
+
+tunnelIfTOS OBJECT-TYPE
+    SYNTAX     Integer32 (-2..63)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The method used to set the high 6 bits (the
+
+            differentiated services codepoint) of the IPv4 TOS or
+            IPv6 Traffic Class in the outer IP header.  A value of
+            -1 indicates that the bits are copied from the
+            payload's header.  A value of -2 indicates that a
+            traffic conditioner is invoked and more information
+            may be available in a traffic conditioner MIB module.
+            A value between 0 and 63 inclusive indicates that the
+            bit field is set to the indicated value.
+
+            Note: instead of the name tunnelIfTOS, a better name
+            would have been tunnelIfDSCPMethod, but the existing
+            name appeared in RFC 2667 and existing objects cannot
+            be renamed."
+    ::= { tunnelIfEntry 6 }
+
+tunnelIfFlowLabel OBJECT-TYPE
+    SYNTAX     IPv6FlowLabelOrAny
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The method used to set the IPv6 Flow Label value.
+            This object need not be present in rows where
+            tunnelIfAddressType indicates the tunnel is not over
+            IPv6.  A value of -1 indicates that a traffic
+            conditioner is invoked and more information may be
+            available in a traffic conditioner MIB.  Any other
+            value indicates that the Flow Label field is set to
+            the indicated value."
+    ::= { tunnelIfEntry 7 }
+
+tunnelIfAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The type of address in the corresponding
+            tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress
+            objects."
+    ::= { tunnelIfEntry 8 }
+
+tunnelIfLocalInetAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel
+            (i.e., the source address used in the outer IP
+            header).  If the address is unknown, the value is
+
+            0.0.0.0 for IPv4 or :: for IPv6.  The type of this
+            object is given by tunnelIfAddressType."
+    ::= { tunnelIfEntry 9 }
+
+tunnelIfRemoteInetAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel
+            (i.e., the destination address used in the outer IP
+            header).  If the address is unknown or the tunnel is
+            not a point-to-point link (e.g., if it is a 6to4
+            tunnel), the value is 0.0.0.0 for tunnels over IPv4 or
+            :: for tunnels over IPv6.  The type of this object is
+            given by tunnelIfAddressType."
+    ::= { tunnelIfEntry 10 }
+
+tunnelIfEncapsLimit OBJECT-TYPE
+    SYNTAX     Integer32 (-1 | 0..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of additional encapsulations
+            permitted for packets undergoing encapsulation at this
+            node.  A value of -1 indicates that no limit is
+            present (except as a result of the packet size)."
+    REFERENCE  "RFC 2473, section 4.1.1"
+    ::= { tunnelIfEntry 11 }
+
+tunnelConfigTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TunnelConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The (conceptual) table containing information on
+            configured tunnels.  This table can be used to map a
+            set of tunnel endpoints to the associated ifIndex
+            value.  It can also be used for row creation.  Note
+            that every row in the tunnelIfTable with a fixed IPv4
+            destination address should have a corresponding row in
+            the tunnelConfigTable, regardless of whether it was
+            created via SNMP.
+
+            Since this table does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigTable."
+    ::= { tunnel 2 }
+
+tunnelConfigEntry OBJECT-TYPE
+    SYNTAX     TunnelConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "An entry (conceptual row) containing the information
+            on a particular configured tunnel.
+
+            Since this entry does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigEntry."
+    INDEX      { tunnelConfigLocalAddress,
+                 tunnelConfigRemoteAddress,
+                 tunnelConfigEncapsMethod,
+                 tunnelConfigID }
+    ::= { tunnelConfigTable 1 }
+
+TunnelConfigEntry ::= SEQUENCE {
+    tunnelConfigLocalAddress            IpAddress,
+    tunnelConfigRemoteAddress           IpAddress,
+    tunnelConfigEncapsMethod            IANAtunnelType,
+    tunnelConfigID                      Integer32,
+    tunnelConfigIfIndex                 InterfaceIndexOrZero,
+    tunnelConfigStatus                  RowStatus
+}
+
+tunnelConfigLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel, or
+            0.0.0.0 if the device is free to choose any of its
+            addresses at tunnel establishment time.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigLocalAddress."
+    ::= { tunnelConfigEntry 1 }
+
+tunnelConfigRemoteAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigRemoteAddress."
+    ::= { tunnelConfigEntry 2 }
+
+tunnelConfigEncapsMethod OBJECT-TYPE
+    SYNTAX     IANAtunnelType
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The encapsulation method used by the tunnel.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigEncapsMethod."
+    ::= { tunnelConfigEntry 3 }
+
+tunnelConfigID OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "An identifier used to distinguish between multiple
+            tunnels of the same encapsulation method, with the
+            same endpoints.  If the encapsulation protocol only
+            allows one tunnel per set of endpoint addresses (such
+            as for GRE or IP-in-IP), the value of this object is
+            1.  For encapsulation methods (such as L2F) which
+            allow multiple parallel tunnels, the manager is
+            responsible for choosing any ID which does not
+            conflict with an existing row, such as choosing a
+            random number.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigID."
+    ::= { tunnelConfigEntry 4 }
+
+tunnelConfigIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "If the value of tunnelConfigStatus for this row is
+            active, then this object contains the value of ifIndex
+            corresponding to the tunnel interface.  A value of 0
+            is not legal in the active state, and means that the
+            interface index has not yet been assigned.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigIfIndex."
+    ::= { tunnelConfigEntry 5 }
+
+tunnelConfigStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  The
+            agent need not support setting this object to
+            createAndWait or notInService since there are no other
+            writable objects in this table, and writable objects
+            in rows of corresponding tables such as the
+            tunnelIfTable may be modified while this row is
+            active.
+
+            To create a row in this table for an encapsulation
+            method which does not support multiple parallel
+            tunnels with the same endpoints, the management
+            station should simply use a tunnelConfigID of 1, and
+            set tunnelConfigStatus to createAndGo.  For
+            encapsulation methods such as L2F which allow multiple
+            parallel tunnels, the management station may select a
+            pseudo-random number to use as the tunnelConfigID and
+            set tunnelConfigStatus to createAndGo.  In the event
+            that this ID is already in use and an
+            inconsistentValue is returned in response to the set
+            operation, the management station should simply select
+            a new pseudo-random number and retry the operation.
+
+            Creating a row in this table will cause an interface
+            index to be assigned by the agent in an
+            implementation-dependent manner, and corresponding
+            rows will be instantiated in the ifTable and the
+            tunnelIfTable.  The status of this row will become
+            active as soon as the agent assigns the interface
+            index, regardless of whether the interface is
+            operationally up.
+
+            Deleting a row in this table will likewise delete the
+            corresponding row in the ifTable and in the
+            tunnelIfTable.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigStatus."
+    ::= { tunnelConfigEntry 6 }
+
+tunnelInetConfigTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TunnelInetConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on
+            configured tunnels.  This table can be used to map a
+            set of tunnel endpoints to the associated ifIndex
+            value.  It can also be used for row creation.  Note
+            that every row in the tunnelIfTable with a fixed
+            destination address should have a corresponding row in
+            the tunnelInetConfigTable, regardless of whether it
+            was created via SNMP."
+    ::= { tunnel 3 }
+
+tunnelInetConfigEntry OBJECT-TYPE
+    SYNTAX     TunnelInetConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information
+            on a particular configured tunnel.  Note that there is
+            a 128 subid maximum for object OIDs.  Implementers
+            need to be aware that if the total number of octets in
+            tunnelInetConfigLocalAddress and
+            tunnelInetConfigRemoteAddress exceeds 110 then OIDs of
+            column instances in this table will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3.  In practice this is not expected
+            to be a problem since IPv4 and IPv6 addresses will not
+            cause the limit to be reached, but if other types are
+            supported by an agent, care must be taken to ensure
+            that the sum of the lengths do not cause the limit to
+            be exceeded."
+    INDEX      { tunnelInetConfigAddressType,
+                 tunnelInetConfigLocalAddress,
+                 tunnelInetConfigRemoteAddress,
+                 tunnelInetConfigEncapsMethod,
+                 tunnelInetConfigID }
+    ::= { tunnelInetConfigTable 1 }
+
+TunnelInetConfigEntry ::= SEQUENCE {
+    tunnelInetConfigAddressType         InetAddressType,
+    tunnelInetConfigLocalAddress        InetAddress,
+    tunnelInetConfigRemoteAddress       InetAddress,
+    tunnelInetConfigEncapsMethod        IANAtunnelType,
+    tunnelInetConfigID                  Integer32,
+    tunnelInetConfigIfIndex             InterfaceIndexOrZero,
+    tunnelInetConfigStatus              RowStatus,
+    tunnelInetConfigStorageType         StorageType
+}
+
+tunnelInetConfigAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type over which the tunnel encapsulates
+            packets."
+    ::= { tunnelInetConfigEntry 1 }
+
+tunnelInetConfigLocalAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel, or
+            0.0.0.0 (for IPv4) or :: (for IPv6) if the device is
+            free to choose any of its addresses at tunnel
+            establishment time."
+    ::= { tunnelInetConfigEntry 2 }
+
+tunnelInetConfigRemoteAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel."
+    ::= { tunnelInetConfigEntry 3 }
+
+tunnelInetConfigEncapsMethod OBJECT-TYPE
+    SYNTAX     IANAtunnelType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The encapsulation method used by the tunnel."
+    ::= { tunnelInetConfigEntry 4 }
+
+tunnelInetConfigID OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An identifier used to distinguish between multiple
+            tunnels of the same encapsulation method, with the
+            same endpoints.  If the encapsulation protocol only
+            allows one tunnel per set of endpoint addresses (such
+            as for GRE or IP-in-IP), the value of this object is
+            1.  For encapsulation methods (such as L2F) which
+            allow multiple parallel tunnels, the manager is
+            responsible for choosing any ID which does not
+
+            conflict with an existing row, such as choosing a
+            random number."
+    ::= { tunnelInetConfigEntry 5 }
+
+tunnelInetConfigIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If the value of tunnelInetConfigStatus for this row
+            is active, then this object contains the value of
+            ifIndex corresponding to the tunnel interface.  A
+            value of 0 is not legal in the active state, and means
+            that the interface index has not yet been assigned."
+    ::= { tunnelInetConfigEntry 6 }
+
+tunnelInetConfigStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  The
+            agent need not support setting this object to
+            createAndWait or notInService since there are no other
+            writable objects in this table, and writable objects
+            in rows of corresponding tables such as the
+            tunnelIfTable may be modified while this row is
+            active.
+
+            To create a row in this table for an encapsulation
+            method which does not support multiple parallel
+            tunnels with the same endpoints, the management
+            station should simply use a tunnelInetConfigID of 1,
+            and set tunnelInetConfigStatus to createAndGo.  For
+            encapsulation methods such as L2F which allow multiple
+            parallel tunnels, the management station may select a
+            pseudo-random number to use as the tunnelInetConfigID
+            and set tunnelInetConfigStatus to createAndGo.  In the
+            event that this ID is already in use and an
+            inconsistentValue is returned in response to the set
+            operation, the management station should simply select
+            a new pseudo-random number and retry the operation.
+
+            Creating a row in this table will cause an interface
+            index to be assigned by the agent in an
+            implementation-dependent manner, and corresponding
+            rows will be instantiated in the ifTable and the
+
+            tunnelIfTable.  The status of this row will become
+            active as soon as the agent assigns the interface
+            index, regardless of whether the interface is
+            operationally up.
+
+            Deleting a row in this table will likewise delete the
+            corresponding row in the ifTable and in the
+            tunnelIfTable."
+    ::= { tunnelInetConfigEntry 7 }
+
+tunnelInetConfigStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type of this row.  If the row is
+            permanent(4), no objects in the row need be writable."
+    ::= { tunnelInetConfigEntry 8 }
+
+-- conformance information
+
+tunnelMIBConformance
+                  OBJECT IDENTIFIER ::= { tunnelMIB 2 }
+tunnelMIBCompliances
+                  OBJECT IDENTIFIER ::= { tunnelMIBConformance 1 }
+tunnelMIBGroups  OBJECT IDENTIFIER ::= { tunnelMIBConformance 2 }
+
+-- compliance statements
+
+tunnelMIBCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The (deprecated) IPv4-only compliance statement for
+            the IP Tunnel MIB.
+
+            This is deprecated in favor of
+            tunnelMIBInetFullCompliance and
+            tunnelMIBInetReadOnlyCompliance."
+    MODULE  -- this module
+    MANDATORY-GROUPS { tunnelMIBBasicGroup }
+
+        OBJECT      tunnelIfHopLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfTOS
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelConfigStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { tunnelMIBCompliances 1 }
+
+tunnelMIBInetFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The full compliance statement for the IP Tunnel MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { tunnelMIBInetGroup }
+
+        OBJECT      tunnelIfAddressType
+        SYNTAX      InetAddressType { ipv4(1), ipv6(2),
+                                      ipv4z(3), ipv6z(4) }
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+            and/or IPv6 addresses.  An implementation only needs to
+            support the addresses it actually supports on the
+            device."
+   ::= { tunnelMIBCompliances 2 }
+
+tunnelMIBInetReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The read-only compliance statement for the IP Tunnel
+            MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { tunnelMIBInetGroup }
+
+        OBJECT      tunnelIfHopLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfTOS
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfFlowLabel
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfAddressType
+        SYNTAX      InetAddressType { ipv4(1), ipv6(2),
+                                      ipv4z(3), ipv6z(4) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+
+            An implementation is only required to support IPv4
+            and/or IPv6 addresses.  An implementation only needs to
+            support the addresses it actually supports on the
+            device."
+
+        OBJECT      tunnelIfLocalInetAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfRemoteInetAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfEncapsLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelInetConfigStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and active is the only
+            status that needs to be supported."
+
+        OBJECT      tunnelInetConfigStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { tunnelMIBCompliances 3 }
+
+-- units of conformance
+
+tunnelMIBBasicGroup OBJECT-GROUP
+    OBJECTS { tunnelIfLocalAddress, tunnelIfRemoteAddress,
+       tunnelIfEncapsMethod, tunnelIfHopLimit, tunnelIfTOS,
+       tunnelIfSecurity, tunnelConfigIfIndex, tunnelConfigStatus }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects to support basic management
+
+            of IPv4 Tunnels.  Since this group cannot support
+            IPv6, it is deprecated in favor of
+            tunnelMIBInetGroup."
+    ::= { tunnelMIBGroups 1 }
+
+tunnelMIBInetGroup OBJECT-GROUP
+    OBJECTS { tunnelIfAddressType, tunnelIfLocalInetAddress,
+       tunnelIfRemoteInetAddress, tunnelIfEncapsMethod,
+       tunnelIfEncapsLimit,
+       tunnelIfHopLimit, tunnelIfTOS, tunnelIfFlowLabel,
+       tunnelIfSecurity, tunnelInetConfigIfIndex,
+       tunnelInetConfigStatus, tunnelInetConfigStorageType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support basic management
+            of IPv4 and IPv6 Tunnels."
+    ::= { tunnelMIBGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/UDP-MIB.mib b/snmp_builder/mibs/UDP-MIB.mib
new file mode 100644
index 0000000..eec9dba
--- /dev/null
+++ b/snmp_builder/mibs/UDP-MIB.mib
@@ -0,0 +1,549 @@
+UDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64,
+    Unsigned32, IpAddress, mib-2       FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
+    InetAddress, InetAddressType,
+    InetPortNumber                     FROM INET-ADDRESS-MIB;
+
+udpMIB MODULE-IDENTITY
+    LAST-UPDATED "200505200000Z"  -- May 20, 2005
+    ORGANIZATION
+           "IETF IPv6 Working Group
+            http://www.ietf.org/html.charters/ipv6-charter.html"
+    CONTACT-INFO
+           "Bill Fenner (editor)
+
+            AT&T Labs -- Research
+            75 Willow Rd.
+            Menlo Park, CA 94025
+
+            Phone: +1 650 330-7893
+            Email: <fenner@research.att.com>
+
+            John Flick (editor)
+
+            Hewlett-Packard Company
+            8000 Foothills Blvd. M/S 5557
+            Roseville, CA 95747
+
+            Phone: +1 916 785 4018
+            Email: <john.flick@hp.com>
+
+            Send comments to <ipv6@ietf.org>"
+    DESCRIPTION
+           "The MIB module for managing UDP implementations.
+            Copyright (C) The Internet Society (2005).  This
+            version of this MIB module is part of RFC 4113;
+            see the RFC itself for full legal notices."
+    REVISION      "200505200000Z"  -- May 20, 2005
+    DESCRIPTION
+           "IP version neutral revision, incorporating the
+            following revisions:
+
+            - Added udpHCInDatagrams and udpHCOutDatagrams in order
+              to provide high-capacity counters for fast networks.
+            - Added text to the descriptions of all counter objects
+              to indicate how discontinuities are detected.
+            - Deprecated the IPv4-specific udpTable and replaced it
+              with the version neutral udpEndpointTable.  This
+              table includes support for connected UDP endpoints
+              and support for identification of the operating
+              system process associated with a UDP endpoint.
+            - Deprecated the udpGroup and replaced it with object
+              groups representing the current set of objects.
+            - Deprecated udpMIBCompliance and replaced it with
+              udpMIBCompliance2, which includes the compliance
+              information for the new object groups.
+
+            This version published as RFC 4113."
+    REVISION      "199411010000Z"    -- November 1, 1994
+    DESCRIPTION
+           "Initial SMIv2 version, published as RFC 2013."
+    REVISION      "199103310000Z"    -- March 31, 1991
+    DESCRIPTION
+           "The initial revision of this MIB module was part of
+            MIB-II, published as RFC 1213."
+    ::= { mib-2 50 }
+
+-- the UDP group
+
+udp      OBJECT IDENTIFIER ::= { mib-2 7 }
+
+udpInDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP datagrams delivered to UDP
+            users.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the management system, and at
+            other times as indicated by discontinuities in the
+            value of sysUpTime."
+    ::= { udp 1 }
+
+udpNoPorts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of received UDP datagrams for which
+            there was no application at the destination port.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the management system, and at
+            other times as indicated by discontinuities in the
+            value of sysUpTime."
+    ::= { udp 2 }
+
+udpInErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of received UDP datagrams that could not be
+            delivered for reasons other than the lack of an
+            application at the destination port.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the management system, and at
+            other times as indicated by discontinuities in the
+            value of sysUpTime."
+    ::= { udp 3 }
+
+udpOutDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP datagrams sent from this
+            entity.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the management system, and at
+            other times as indicated by discontinuities in the
+            value of sysUpTime."
+    ::= { udp 4 }
+
+udpHCInDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP datagrams delivered to UDP
+            users, for devices that can receive more than 1
+            million UDP datagrams per second.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the management system, and at
+            other times as indicated by discontinuities in the
+            value of sysUpTime."
+    ::= { udp 8 }
+
+udpHCOutDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP datagrams sent from this
+            entity, for devices that can transmit more than 1
+            million UDP datagrams per second.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the management system, and at
+            other times as indicated by discontinuities in the
+            value of sysUpTime."
+    ::= { udp 9 }
+
+--
+-- { udp 6 } was defined as the ipv6UdpTable in RFC2454's
+-- IPV6-UDP-MIB.  This RFC obsoletes RFC 2454, so { udp 6 } is
+-- obsoleted.
+--
+
+-- The UDP "Endpoint" table.
+
+udpEndpointTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UdpEndpointEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A table containing information about this entity's UDP
+            endpoints on which a local application is currently
+            accepting or sending datagrams.
+
+            The address type in this table represents the address
+            type used for the communication, irrespective of the
+            higher-layer abstraction.  For example, an application
+            using IPv6 'sockets' to communicate via IPv4 between
+            ::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use
+            InetAddressType ipv4(1).
+
+            Unlike the udpTable in RFC 2013, this table also allows
+            the representation of an application that completely
+            specifies both local and remote addresses and ports.  A
+            listening application is represented in three possible
+            ways:
+
+            1) An application that is willing to accept both IPv4
+               and IPv6 datagrams is represented by a
+               udpEndpointLocalAddressType of unknown(0) and a
+               udpEndpointLocalAddress of ''h (a zero-length
+               octet-string).
+
+            2) An application that is willing to accept only IPv4
+               or only IPv6 datagrams is represented by a
+               udpEndpointLocalAddressType of the appropriate
+               address type and a udpEndpointLocalAddress of
+               '0.0.0.0' or '::' respectively.
+
+            3) An application that is listening for datagrams only
+               for a specific IP address but from any remote
+               system is represented by a
+               udpEndpointLocalAddressType of the appropriate
+               address type, with udpEndpointLocalAddress
+               specifying the local address.
+
+            In all cases where the remote is a wildcard, the
+            udpEndpointRemoteAddressType is unknown(0), the
+            udpEndpointRemoteAddress is ''h (a zero-length
+            octet-string), and the udpEndpointRemotePort is 0.
+
+            If the operating system is demultiplexing UDP packets
+            by remote address and port, or if the application has
+            'connected' the socket specifying a default remote
+            address and port, the udpEndpointRemote* values should
+            be used to reflect this."
+    ::= { udp 7 }
+
+udpEndpointEntry OBJECT-TYPE
+    SYNTAX     UdpEndpointEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Information about a particular current UDP endpoint.
+
+            Implementers need to be aware that if the total number
+            of elements (octets or sub-identifiers) in
+            udpEndpointLocalAddress and udpEndpointRemoteAddress
+            exceeds 111, then OIDs of column instances in this table
+            will have more than 128 sub-identifiers and cannot be
+            accessed using SNMPv1, SNMPv2c, or SNMPv3."
+    INDEX   { udpEndpointLocalAddressType,
+              udpEndpointLocalAddress,
+              udpEndpointLocalPort,
+              udpEndpointRemoteAddressType,
+              udpEndpointRemoteAddress,
+              udpEndpointRemotePort,
+              udpEndpointInstance }
+    ::= { udpEndpointTable 1 }
+
+UdpEndpointEntry ::= SEQUENCE {
+        udpEndpointLocalAddressType   InetAddressType,
+        udpEndpointLocalAddress       InetAddress,
+        udpEndpointLocalPort          InetPortNumber,
+        udpEndpointRemoteAddressType  InetAddressType,
+        udpEndpointRemoteAddress      InetAddress,
+        udpEndpointRemotePort         InetPortNumber,
+        udpEndpointInstance           Unsigned32,
+        udpEndpointProcess            Unsigned32
+    }
+
+udpEndpointLocalAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of udpEndpointLocalAddress.  Only
+            IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+            unknown(0) if datagrams for all local IP addresses are
+            accepted."
+    ::= { udpEndpointEntry 1 }
+
+udpEndpointLocalAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local IP address for this UDP endpoint.
+
+            The value of this object can be represented in three
+
+            possible ways, depending on the characteristics of the
+            listening application:
+
+            1. For an application that is willing to accept both
+               IPv4 and IPv6 datagrams, the value of this object
+               must be ''h (a zero-length octet-string), with
+               the value of the corresponding instance of the
+               udpEndpointLocalAddressType object being unknown(0).
+
+            2. For an application that is willing to accept only IPv4
+               or only IPv6 datagrams, the value of this object
+               must be '0.0.0.0' or '::', respectively, while the
+               corresponding instance of the
+               udpEndpointLocalAddressType object represents the
+               appropriate address type.
+
+            3. For an application that is listening for data
+               destined only to a specific IP address, the value
+               of this object is the specific IP address for which
+               this node is receiving packets, with the
+               corresponding instance of the
+               udpEndpointLocalAddressType object representing the
+               appropriate address type.
+
+            As this object is used in the index for the
+            udpEndpointTable, implementors of this table should be
+            careful not to create entries that would result in OIDs
+            with more than 128 subidentifiers; else the information
+            cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { udpEndpointEntry 2 }
+
+udpEndpointLocalPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local port number for this UDP endpoint."
+    ::= { udpEndpointEntry 3 }
+
+udpEndpointRemoteAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of udpEndpointRemoteAddress.  Only
+            IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+            unknown(0) if datagrams for all remote IP addresses are
+            accepted.  Also, note that some combinations of
+
+            udpEndpointLocalAdressType and
+            udpEndpointRemoteAddressType are not supported.  In
+            particular, if the value of this object is not
+            unknown(0), it is expected to always refer to the
+            same IP version as udpEndpointLocalAddressType."
+    ::= { udpEndpointEntry 4 }
+
+udpEndpointRemoteAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The remote IP address for this UDP endpoint.  If
+            datagrams from any remote system are to be accepted,
+            this value is ''h (a zero-length octet-string).
+            Otherwise, it has the type described by
+            udpEndpointRemoteAddressType and is the address of the
+            remote system from which datagrams are to be accepted
+            (or to which all datagrams will be sent).
+
+            As this object is used in the index for the
+            udpEndpointTable, implementors of this table should be
+            careful not to create entries that would result in OIDs
+            with more than 128 subidentifiers; else the information
+            cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { udpEndpointEntry 5 }
+
+udpEndpointRemotePort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The remote port number for this UDP endpoint.  If
+            datagrams from any remote system are to be accepted,
+            this value is zero."
+    ::= { udpEndpointEntry 6 }
+
+udpEndpointInstance OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The instance of this tuple.  This object is used to
+            distinguish among multiple processes 'connected' to
+            the same UDP endpoint.  For example, on a system
+            implementing the BSD sockets interface, this would be
+            used to support the SO_REUSEADDR and SO_REUSEPORT
+            socket options."
+    ::= { udpEndpointEntry 7 }
+
+udpEndpointProcess OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The system's process ID for the process associated with
+            this endpoint, or zero if there is no such process.
+            This value is expected to be the same as
+            HOST-RESOURCES-MIB::hrSWRunIndex or SYSAPPL-MIB::
+            sysApplElmtRunIndex for some row in the appropriate
+            tables."
+    ::= { udpEndpointEntry 8 }
+
+-- The deprecated UDP Listener table
+
+-- The deprecated UDP listener table only contains information
+-- about this entity's IPv4 UDP end-points on which a local
+-- application is currently accepting datagrams.  It does not
+-- provide more detailed connection information, or information
+-- about IPv6 endpoints.
+
+udpTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UdpEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "A table containing IPv4-specific UDP listener
+            information.  It contains information about all local
+            IPv4 UDP end-points on which an application is
+            currently accepting datagrams.  This table has been
+            deprecated in favor of the version neutral
+            udpEndpointTable."
+    ::= { udp 5 }
+
+udpEntry OBJECT-TYPE
+    SYNTAX     UdpEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "Information about a particular current UDP listener."
+    INDEX   { udpLocalAddress, udpLocalPort }
+    ::= { udpTable 1 }
+
+UdpEntry ::= SEQUENCE {
+    udpLocalAddress   IpAddress,
+    udpLocalPort      Integer32
+
+}
+
+udpLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The local IP address for this UDP listener.  In the
+            case of a UDP listener that is willing to accept
+            datagrams for any IP interface associated with the
+            node, the value 0.0.0.0 is used."
+    ::= { udpEntry 1 }
+
+udpLocalPort OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The local port number for this UDP listener."
+    ::= { udpEntry 2 }
+
+-- conformance information
+
+udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 }
+udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 }
+udpMIBGroups      OBJECT IDENTIFIER ::= { udpMIBConformance 2 }
+
+-- compliance statements
+
+udpMIBCompliance2 MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "The compliance statement for systems that implement
+            UDP.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2, but
+            for which we have the following compliance
+            requirements, expressed in OBJECT clause form in this
+            description clause:
+
+            -- OBJECT      udpEndpointLocalAddressType
+            -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+            --                               ipv6(2), ipv4z(3),
+            --                               ipv6z(4) }
+            -- DESCRIPTION
+            --     Support for dns(5) is not required.
+            -- OBJECT      udpEndpointLocalAddress
+
+            -- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+            -- DESCRIPTION
+            --     Support is only required for zero-length
+            --     octet-strings, and for scoped and unscoped
+            --     IPv4 and IPv6 addresses.
+            -- OBJECT      udpEndpointRemoteAddressType
+            -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+            --                               ipv6(2), ipv4z(3),
+            --                               ipv6z(4) }
+            -- DESCRIPTION
+            --     Support for dns(5) is not required.
+            -- OBJECT      udpEndpointRemoteAddress
+            -- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+            -- DESCRIPTION
+            --     Support is only required for zero-length
+            --     octet-strings, and for scoped and unscoped
+            --     IPv4 and IPv6 addresses.
+           "
+    MODULE  -- this module
+         MANDATORY-GROUPS { udpBaseGroup, udpEndpointGroup }
+         GROUP       udpHCGroup
+         DESCRIPTION
+                "This group is mandatory for systems that
+                 are capable of receiving or transmitting more than
+                 1 million UDP datagrams per second.  1 million
+                 datagrams per second will cause a Counter32 to
+                 wrap in just over an hour."
+    ::= { udpMIBCompliances 2 }
+
+udpMIBCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for IPv4-only systems that
+            implement UDP.  For IP version independence, this
+            compliance statement is deprecated in favor of
+            udpMIBCompliance2.  However, agents are still
+            encouraged to implement these objects in order to
+            interoperate with the deployed base of managers."
+    MODULE  -- this module
+        MANDATORY-GROUPS { udpGroup }
+    ::= { udpMIBCompliances 1 }
+
+-- units of conformance
+
+udpGroup OBJECT-GROUP
+    OBJECTS   { udpInDatagrams, udpNoPorts,
+                udpInErrors, udpOutDatagrams,
+                udpLocalAddress, udpLocalPort }
+    STATUS     deprecated
+    DESCRIPTION
+           "The deprecated group of objects providing for
+            management of UDP over IPv4."
+    ::= { udpMIBGroups 1 }
+
+udpBaseGroup OBJECT-GROUP
+    OBJECTS   { udpInDatagrams, udpNoPorts, udpInErrors,
+                udpOutDatagrams }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for counters of UDP
+            statistics."
+    ::= { udpMIBGroups 2 }
+
+udpHCGroup OBJECT-GROUP
+    OBJECTS   { udpHCInDatagrams, udpHCOutDatagrams }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for counters of high
+            speed UDP implementations."
+    ::= { udpMIBGroups 3 }
+
+udpEndpointGroup OBJECT-GROUP
+    OBJECTS    { udpEndpointProcess }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for the IP version
+            independent management of UDP 'endpoints'."
+    ::= { udpMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/UDPLITE-MIB.mib b/snmp_builder/mibs/UDPLITE-MIB.mib
new file mode 100644
index 0000000..a4639c6
--- /dev/null
+++ b/snmp_builder/mibs/UDPLITE-MIB.mib
@@ -0,0 +1,513 @@
+UDPLITE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    mib-2, Unsigned32,
+    Counter32, Counter64   FROM SNMPv2-SMI           -- [RFC2578]
+
+    TimeStamp              FROM SNMPv2-TC            -- [RFC2579]
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP           FROM SNMPv2-CONF          -- [RFC2580]
+
+    InetAddress,
+    InetAddressType,
+    InetPortNumber         FROM INET-ADDRESS-MIB;    -- [RFC4001]
+
+udpliteMIB MODULE-IDENTITY
+    LAST-UPDATED "200712180000Z"       -- 18 December 2007
+    ORGANIZATION "IETF TSV Working Group (TSVWG)"
+    CONTACT-INFO
+           "IETF TSV Working Group
+            http://www.ietf.org/html.charters/tsvwg-charter.html
+            Mailing List: tsvwg@ietf.org
+
+            Gerrit Renker, Godred Fairhurst
+            Electronics Research Group
+            School of Engineering, University of Aberdeen
+            Fraser Noble Building, Aberdeen AB24 3UE, UK"
+    DESCRIPTION
+           "The MIB module for managing UDP-Lite implementations.
+            Copyright (C) The IETF Trust (2008).  This version of
+            this MIB module is part of RFC 5097; see the RFC
+            itself for full legal notices."
+
+    REVISION "200712180000Z"           -- 18 December 2007
+    DESCRIPTION
+           "Initial SMIv2 revision, based on the format of the UDP
+            MIB module (RFC 4113) and published as RFC 5097."
+    ::= { mib-2 170 }
+
+udplite      OBJECT IDENTIFIER ::= { udpliteMIB 1 }
+
+udpliteInDatagrams OBJECT-TYPE         -- as in UDP-MIB
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP-Lite datagrams that were
+            delivered to UDP-Lite users.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udplite 1 }
+
+udpliteInPartialCov OBJECT-TYPE        -- new in UDP-Lite
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP-Lite datagrams that were
+            delivered to UDP-Lite users (applications) and whose
+            checksum coverage was strictly less than the datagram
+            length.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udplite 2 }
+
+udpliteNoPorts OBJECT-TYPE             -- as in UDP-MIB
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of received UDP-Lite datagrams for
+            which there was no listener at the destination port.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udplite 3 }
+
+udpliteInErrors OBJECT-TYPE            -- as in UDP-MIB
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of received UDP-Lite datagrams that could not
+            be delivered for reasons other than the lack of an
+            application at the destination port.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udplite 4 }
+
+udpliteInBadChecksum OBJECT-TYPE       -- new in UDP-Lite
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of received UDP-Lite datagrams whose checksum
+            could not be validated.  This includes illegal checksum
+            coverage values, as their use would lead to incorrect
+            checksums.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    REFERENCE "RFC 3828, section 3.1"
+    ::= { udplite 5 }
+
+udpliteOutDatagrams OBJECT-TYPE        -- as in UDP-MIB
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of UDP-Lite datagrams sent from this
+            entity.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udplite 6 }
+
+udpliteOutPartialCov OBJECT-TYPE       -- new in UDP-Lite
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of udpliteOutDatagrams whose
+            checksum coverage was strictly less than the
+            datagram length.
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udplite 7 }
+
+udpliteEndpointTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UdpLiteEndpointEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A table containing information about this entity's
+            UDP-Lite endpoints on which a local application is
+            currently accepting or sending datagrams.
+
+            The address type in this table represents the address
+            type used for the communication, irrespective of the
+            higher-layer abstraction.  For example, an application
+            using IPv6 'sockets' to communicate via IPv4 between
+            ::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use
+            InetAddressType ipv4(1).
+
+            Like the udpTable in RFC 4113, this table also allows
+            the representation of an application that completely
+            specifies both local and remote addresses and ports.  A
+            listening application is represented in three possible
+            ways:
+
+            1) An application that is willing to accept both IPv4
+               and IPv6 datagrams is represented by a
+               udpliteEndpointLocalAddressType of unknown(0) and a
+               udpliteEndpointLocalAddress of ''h (a zero-length
+
+               octet-string).
+
+            2) An application that is willing to accept only IPv4
+               or only IPv6 datagrams is represented by a
+               udpliteEndpointLocalAddressType of the appropriate
+               address type and a udpliteEndpointLocalAddress of
+               '0.0.0.0' or '::' respectively.
+
+            3) An application that is listening for datagrams only
+               for a specific IP address but from any remote
+               system is represented by a
+               udpliteEndpointLocalAddressType of the appropriate
+               address type, with udpliteEndpointLocalAddress
+               specifying the local address.
+
+            In all cases where the remote address is a wildcard,
+            the udpliteEndpointRemoteAddressType is unknown(0),
+            the udpliteEndpointRemoteAddress is ''h (a zero-length
+            octet-string), and the udpliteEndpointRemotePort is 0.
+
+            If the operating system is demultiplexing UDP-Lite
+            packets by remote address/port, or if the application
+            has 'connected' the socket specifying a default remote
+            address/port, the udpliteEndpointRemote* values should
+            be used to reflect this."
+    ::= { udplite 8 }
+
+udpliteEndpointEntry OBJECT-TYPE
+    SYNTAX     UdpLiteEndpointEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Information about a particular current UDP-Lite endpoint.
+            Implementers need to pay attention to the sizes of
+            udpliteEndpointLocalAddress/RemoteAddress, as Object
+            Identifiers (OIDs) of column instances in this table must
+            have no more than 128 sub-identifiers in order to remain
+             accessible with SNMPv1, SNMPv2c, and SNMPv3."
+    INDEX   { udpliteEndpointLocalAddressType,
+              udpliteEndpointLocalAddress,
+              udpliteEndpointLocalPort,
+              udpliteEndpointRemoteAddressType,
+              udpliteEndpointRemoteAddress,
+              udpliteEndpointRemotePort,
+              udpliteEndpointInstance }
+    ::= { udpliteEndpointTable 1 }
+
+UdpLiteEndpointEntry ::= SEQUENCE {
+
+        udpliteEndpointLocalAddressType   InetAddressType,
+        udpliteEndpointLocalAddress       InetAddress,
+        udpliteEndpointLocalPort          InetPortNumber,
+        udpliteEndpointRemoteAddressType  InetAddressType,
+        udpliteEndpointRemoteAddress      InetAddress,
+        udpliteEndpointRemotePort         InetPortNumber,
+        udpliteEndpointInstance           Unsigned32,
+        udpliteEndpointProcess            Unsigned32,
+        udpliteEndpointMinCoverage        Unsigned32,
+        udpliteEndpointViolCoverage       Counter32
+}
+
+udpliteEndpointLocalAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of udpliteEndpointLocalAddress.  Only
+            IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+            unknown(0) if datagrams for all local IP addresses are
+            accepted."
+    ::= { udpliteEndpointEntry 1 }
+
+udpliteEndpointLocalAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local IP address for this UDP-Lite endpoint.
+
+            The value of this object can be represented in three
+            possible ways, depending on the characteristics of the
+            listening application:
+
+            1. For an application that is willing to accept both
+               IPv4 and IPv6 datagrams, the value of this object
+               must be ''h (a zero-length octet-string), with
+               the value of the corresponding instance of the
+               EndpointLocalAddressType object being unknown(0).
+
+            2. For an application that is willing to accept only
+               IPv4 or only IPv6 datagrams, the value of this
+               object must be '0.0.0.0' or '::', respectively,
+               while the corresponding instance of the
+               EndpointLocalAddressType object represents the
+               appropriate address type.
+
+            3. For an application that is listening for data
+
+               destined only to a specific IP address, the value
+               of this object is the specific IP address for
+               which this node is receiving packets, with the
+               corresponding instance of the
+               EndpointLocalAddressType object representing the
+               appropriate address type.
+
+            As this object is used in the index for the
+            udpliteEndpointTable, implementors should be careful
+            not to create entries that would result in OIDs with
+            more than 128 sub-identifiers; this is because of SNMP
+            and SMI limitations."
+    ::= { udpliteEndpointEntry 2 }
+
+udpliteEndpointLocalPort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The local port number for this UDP-Lite endpoint."
+    ::= { udpliteEndpointEntry 3 }
+
+udpliteEndpointRemoteAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of udpliteEndpointRemoteAddress.  Only
+            IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+            unknown(0) if datagrams for all remote IP addresses are
+            accepted.  Also, note that some combinations of
+            udpliteEndpointLocalAdressType and
+            udpliteEndpointRemoteAddressType are not supported.  In
+            particular, if the value of this object is not
+            unknown(0), it is expected to always refer to the
+            same IP version as udpliteEndpointLocalAddressType."
+    ::= { udpliteEndpointEntry 4 }
+
+udpliteEndpointRemoteAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The remote IP address for this UDP-Lite endpoint.  If
+            datagrams from any remote system are to be accepted,
+            this value is ''h (a zero-length octet-string).
+            Otherwise, it has the type described by
+            udpliteEndpointRemoteAddressType and is the address of
+
+            the remote system from which datagrams are to be
+            accepted (or to which all datagrams will be sent).
+
+            As this object is used in the index for the
+            udpliteEndpointTable, implementors should be careful
+            not to create entries that would result in OIDs with
+            more than 128 sub-identifiers; this is because of SNMP
+            and SMI limitations."
+    ::= { udpliteEndpointEntry 5 }
+
+udpliteEndpointRemotePort OBJECT-TYPE
+    SYNTAX     InetPortNumber
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The remote port number for this UDP-Lite endpoint.  If
+            datagrams from any remote system are to be accepted,
+            this value is zero."
+    ::= { udpliteEndpointEntry 6 }
+
+udpliteEndpointInstance OBJECT-TYPE
+    SYNTAX     Unsigned32 (1..'ffffffff'h)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The instance of this tuple.  This object is used to
+            distinguish among multiple processes 'connected' to
+            the same UDP-Lite endpoint.  For example, on a system
+            implementing the BSD sockets interface, this would be
+            used to support the SO_REUSEADDR and SO_REUSEPORT
+            socket options."
+    ::= { udpliteEndpointEntry 7 }
+
+udpliteEndpointProcess OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "A unique value corresponding to a piece of software
+            running on this endpoint.
+
+            If this endpoint is associated with more than one piece
+            of software, the agent should choose one of these.  As
+            long as the representative piece of software
+            is running and still associated with the endpoint,
+            subsequent reads will consistently return the same
+            value.  The implementation may use any algorithm
+            satisfying these constraints (e.g., choosing the entity
+
+            with the oldest start time).
+
+            This identifier is platform-specific.  Wherever possible,
+            it should use the system's native, unique identification
+            number as the value.
+
+            If the SYSAPPL-MIB module is available, the value should
+            be the same as sysApplElmtRunIndex.  If not available, an
+            alternative should be used (e.g., the hrSWRunIndex of the
+            HOST-RESOURCES-MIB module).
+
+            If it is not possible to uniquely identify the pieces of
+            software associated with this endpoint, then the value
+            zero should be used.  (Note that zero is otherwise a
+            valid value for sysApplElmtRunIndex.)"
+    ::= { udpliteEndpointEntry 8 }
+
+udpliteEndpointMinCoverage OBJECT-TYPE -- new in UDP-Lite
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The minimum checksum coverage expected by this endpoint.
+            A value of 0 indicates that only fully covered datagrams
+            are accepted."
+    REFERENCE "RFC 3828, section 3.1"
+    ::= { udpliteEndpointEntry 9 }
+
+udpliteEndpointViolCoverage OBJECT-TYPE -- new / optional in UDP-Lite
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams received by this endpoint whose
+            checksum coverage violated the minimum coverage threshold
+            set for this connection (i.e., all valid datagrams whose
+            checksum coverage was strictly smaller than the minimum,
+            as defined in RFC 3828).
+            Discontinuities in the value of this counter can occur
+            at re-initialisation of the management system, and at
+            other times as indicated by the value of
+            udpliteStatsDiscontinuityTime."
+    ::= { udpliteEndpointEntry 10 }
+
+udpliteStatsDiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the most recent occasion at
+            which one or more of the UDP-Lite counters suffered a
+            discontinuity.
+            A value of zero indicates no such discontinuity has
+            occurred since the last re-initialisation of the local
+            management subsystem."
+    ::= { udplite 9 }
+
+-- Conformance Information
+
+udpliteMIBConformance OBJECT IDENTIFIER ::= { udpliteMIB 2 }
+
+udpliteMIBCompliance MODULE-COMPLIANCE
+       STATUS     current
+       DESCRIPTION
+           "The compliance statement for systems that implement
+            UDP-Lite.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2,
+            but for which we have the following compliance
+            requirements, expressed in OBJECT clause form in this
+            description clause:
+
+            -- OBJECT      udpliteEndpointLocalAddressType
+            -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+            --                               ipv6(2), ipv4z(3),
+            --                               ipv6z(4) }
+            -- DESCRIPTION
+            --     Support for dns(16) is not required.
+            -- OBJECT      udpliteEndpointLocalAddress
+            -- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+            -- DESCRIPTION
+            --     Support is only required for zero-length
+            --     octet-strings, and for scoped and unscoped
+            --     IPv4 and IPv6 addresses.
+            -- OBJECT      udpliteEndpointRemoteAddressType
+            -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+            --                               ipv6(2), ipv4z(3),
+            --                               ipv6z(4) }
+            -- DESCRIPTION
+            --     Support for dns(16) is not required.
+            -- OBJECT      udpliteEndpointRemoteAddress
+
+            -- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+            -- DESCRIPTION
+            --     Support is only required for zero-length
+            --     octet-strings, and for scoped and unscoped
+            --     IPv4 and IPv6 addresses.
+           "
+    MODULE  -- this module
+         MANDATORY-GROUPS { udpliteBaseGroup,
+                            udplitePartialCsumGroup,
+                            udpliteEndpointGroup    }
+     GROUP               udpliteAppGroup
+     DESCRIPTION
+            "This group is optional and provides supplementary
+             information about the effectiveness of using minimum
+             checksum coverage thresholds on endpoints."
+    ::= { udpliteMIBConformance 1 }
+
+udpliteMIBGroups OBJECT IDENTIFIER ::= { udpliteMIBConformance 2 }
+
+udpliteBaseGroup OBJECT-GROUP          -- as in UDP
+    OBJECTS   { udpliteInDatagrams, udpliteNoPorts, udpliteInErrors,
+                udpliteOutDatagrams, udpliteStatsDiscontinuityTime }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for counters of
+            basic UDP-like statistics."
+    ::= { udpliteMIBGroups 1 }
+
+udplitePartialCsumGroup OBJECT-GROUP  -- specific to UDP-Lite
+    OBJECTS   { udpliteInPartialCov,
+                udpliteInBadChecksum,
+                udpliteOutPartialCov  }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for counters of
+            transport layer statistics exclusive to UDP-Lite."
+    ::= { udpliteMIBGroups 2 }
+
+udpliteEndpointGroup OBJECT-GROUP
+    OBJECTS    { udpliteEndpointProcess, udpliteEndpointMinCoverage }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing for the IP version
+            independent management of UDP-Lite 'endpoints'."
+    ::= { udpliteMIBGroups 3 }
+
+udpliteAppGroup OBJECT-GROUP
+    OBJECTS    { udpliteEndpointViolCoverage }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects that provide application-level
+            information for the configuration management of
+            UDP-Lite 'endpoints'."
+    ::= { udpliteMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/UPS-MIB.mib b/snmp_builder/mibs/UPS-MIB.mib
new file mode 100644
index 0000000..f74ad27
--- /dev/null
+++ b/snmp_builder/mibs/UPS-MIB.mib
@@ -0,0 +1,1899 @@
+UPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    OBJECT-IDENTITY, Counter32, Gauge32, Integer32, mib-2
+        FROM SNMPv2-SMI
+    DisplayString, TimeStamp, TimeInterval, TestAndIncr,
+      AutonomousType
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF;
+
+upsMIB MODULE-IDENTITY
+    LAST-UPDATED "9402230000Z"
+    ORGANIZATION "IETF UPS MIB Working Group"
+    CONTACT-INFO
+           "        Jeffrey D. Case
+
+             Postal: SNMP Research, Incorporated
+                     3001 Kimberlin Heights Road
+                     Knoxville, TN  37920
+                     US
+
+                Tel: +1 615 573 1434
+                Fax: +1 615 573 9197
+
+             E-mail: case@snmp.com"
+    DESCRIPTION
+            "The MIB module to describe Uninterruptible Power
+            Supplies."
+    ::= { mib-2 33 }
+
+PositiveInteger ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "This data type is a non-zero and non-negative value."
+    SYNTAX       INTEGER (1..2147483647)
+
+NonNegativeInteger ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "This data type is a non-negative value."
+    SYNTAX       INTEGER (0..2147483647)
+
+upsObjects            OBJECT IDENTIFIER ::= { upsMIB 1 }
+
+--
+-- The Device Identification group.
+--      All objects in this group except for upsIdentName and
+--      upsIdentAttachedDevices are set at device initialization
+--      and remain static.
+--
+
+upsIdent              OBJECT IDENTIFIER ::= { upsObjects 1 }
+
+upsIdentManufacturer OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..31))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The name of the UPS manufacturer."
+    ::= { upsIdent 1 }
+
+upsIdentModel OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The UPS Model designation."
+    ::= { upsIdent 2 }
+
+upsIdentUPSSoftwareVersion OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The UPS firmware/software version(s).  This variable
+            may or may not have the same value as
+            upsIdentAgentSoftwareVersion in some implementations."
+    ::= { upsIdent 3 }
+
+upsIdentAgentSoftwareVersion OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..63))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The UPS agent software version.  This variable may or
+            may not have the same value as
+            upsIdentUPSSoftwareVersion in some implementations."
+    ::= { upsIdent 4 }
+
+upsIdentName OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "A string identifying the UPS.  This object should be
+            set by the administrator."
+    ::= { upsIdent 5 }
+
+upsIdentAttachedDevices OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE(0..63))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "A string identifying the devices attached to the
+            output(s) of the UPS.  This object should be set by
+            the administrator."
+    ::= { upsIdent 6 }
+
+--
+-- Battery Group
+--
+
+upsBattery            OBJECT IDENTIFIER ::= { upsObjects 2 }
+
+upsBatteryStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+        unknown(1),
+        batteryNormal(2),
+        batteryLow(3),
+        batteryDepleted(4)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The indication of the capacity remaining in the UPS
+            system's batteries.   A value of batteryNormal
+            indicates that the remaining run-time is greater than
+            upsConfigLowBattTime.  A value of batteryLow indicates
+            that the remaining battery run-time is less than or
+            equal to upsConfigLowBattTime.  A value of
+            batteryDepleted indicates that the UPS will be unable
+            to sustain the present load when and if the utility
+            power is lost (including the possibility that the
+            utility power is currently absent and the UPS is
+            unable to sustain the output)."
+    ::= { upsBattery 1 }
+
+upsSecondsOnBattery OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If the unit is on battery power, the elapsed time
+            since the UPS last switched to battery power, or the
+            time since the network management subsystem was last
+            restarted, whichever is less.  Zero shall be returned
+            if the unit is not on battery power."
+    ::= { upsBattery 2 }
+
+upsEstimatedMinutesRemaining OBJECT-TYPE
+    SYNTAX     PositiveInteger
+    UNITS      "minutes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An estimate of the time to battery charge depletion
+            under the present load conditions if the utility power
+            is off and remains off, or if it were to be lost and
+            remain off."
+    ::= { upsBattery 3 }
+
+upsEstimatedChargeRemaining OBJECT-TYPE
+    SYNTAX     INTEGER (0..100)
+    UNITS      "percent"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An estimate of the battery charge remaining expressed
+            as a percent of full charge."
+    ::= { upsBattery 4 }
+
+upsBatteryVoltage OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 Volt DC"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the present battery voltage."
+    ::= { upsBattery 5 }
+
+upsBatteryCurrent OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "0.1 Amp DC"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present battery current."
+    ::= { upsBattery 6 }
+
+upsBatteryTemperature OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "degrees Centigrade"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The ambient temperature at or near the UPS Battery
+            casing."
+    ::= { upsBattery 7 }
+
+--
+-- Input Group
+--
+
+upsInput              OBJECT IDENTIFIER ::= { upsObjects 3 }
+
+upsInputLineBads OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A count of the number of times the input entered an
+            out-of-tolerance condition as defined by the
+            manufacturer.  This count is incremented by one each
+            time the input transitions from zero out-of-tolerance
+            lines to one or more input lines out-of-tolerance."
+    ::= { upsInput 1 }
+
+upsInputNumLines OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of input lines utilized in this device.
+            This variable indicates the number of rows in the
+            input table."
+    ::= { upsInput 2 }
+
+upsInputTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UpsInputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of input table entries.  The number of entries
+            is given by the value of upsInputNumLines."
+    ::= { upsInput 3 }
+
+upsInputEntry OBJECT-TYPE
+    SYNTAX     UpsInputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing information applicable to a
+            particular input line."
+    INDEX { upsInputLineIndex }
+    ::= { upsInputTable 1 }
+
+UpsInputEntry ::= SEQUENCE {
+    upsInputLineIndex   PositiveInteger,
+    upsInputFrequency   NonNegativeInteger,
+    upsInputVoltage     NonNegativeInteger,
+    upsInputCurrent     NonNegativeInteger,
+    upsInputTruePower   NonNegativeInteger
+}
+
+upsInputLineIndex OBJECT-TYPE
+    SYNTAX     PositiveInteger
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The input line identifier."
+    ::= { upsInputEntry 1 }
+
+upsInputFrequency OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 Hertz"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present input frequency."
+    ::= { upsInputEntry 2 }
+
+upsInputVoltage OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the present input voltage."
+    ::= { upsInputEntry 3 }
+
+upsInputCurrent OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 RMS Amp"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the present input current."
+    ::= { upsInputEntry 4 }
+
+upsInputTruePower OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "Watts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the present input true power."
+    ::= { upsInputEntry 5 }
+
+--
+-- The Output group.
+--
+
+upsOutput             OBJECT IDENTIFIER ::= { upsObjects 4 }
+
+upsOutputSource OBJECT-TYPE
+    SYNTAX     INTEGER {
+        other(1),
+        none(2),
+        normal(3),
+        bypass(4),
+        battery(5),
+        booster(6),
+        reducer(7)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present source of output power.  The enumeration
+            none(2) indicates that there is no source of output
+            power (and therefore no output power), for example,
+            the system has opened the output breaker."
+    ::= { upsOutput 1 }
+
+upsOutputFrequency OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 Hertz"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present output frequency."
+    ::= { upsOutput 2 }
+
+upsOutputNumLines OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of output lines utilized in this device.
+            This variable indicates the number of rows in the
+            output table."
+    ::= { upsOutput 3 }
+
+upsOutputTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UpsOutputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of output table entries.  The number of
+            entries is given by the value of upsOutputNumLines."
+    ::= { upsOutput 4 }
+
+upsOutputEntry OBJECT-TYPE
+    SYNTAX     UpsOutputEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing information applicable to a
+            particular output line."
+    INDEX { upsOutputLineIndex }
+    ::= { upsOutputTable 1 }
+
+UpsOutputEntry ::= SEQUENCE {
+    upsOutputLineIndex   PositiveInteger,
+    upsOutputVoltage     NonNegativeInteger,
+    upsOutputCurrent     NonNegativeInteger,
+    upsOutputPower       NonNegativeInteger,
+    upsOutputPercentLoad INTEGER
+}
+
+upsOutputLineIndex OBJECT-TYPE
+    SYNTAX     PositiveInteger
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The output line identifier."
+    ::= { upsOutputEntry 1 }
+
+upsOutputVoltage OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present output voltage."
+    ::= { upsOutputEntry 2 }
+
+upsOutputCurrent OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 RMS Amp"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present output current."
+    ::= { upsOutputEntry 3 }
+
+upsOutputPower OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "Watts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present output true power."
+    ::= { upsOutputEntry 4 }
+
+upsOutputPercentLoad OBJECT-TYPE
+    SYNTAX     INTEGER (0..200)
+    UNITS      "percent"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The percentage of the UPS power capacity presently
+            being used on this output line, i.e., the greater of
+            the percent load of true power capacity and the
+            percent load of VA."
+    ::= { upsOutputEntry 5 }
+
+--
+-- The Bypass group.
+--
+
+upsBypass             OBJECT IDENTIFIER ::= { upsObjects 5 }
+
+upsBypassFrequency OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 Hertz"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present bypass frequency."
+    ::= { upsBypass 1 }
+
+upsBypassNumLines OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The number of bypass lines utilized in this device.
+            This entry indicates the number of rows in the bypass
+            table."
+    ::= { upsBypass 2 }
+
+upsBypassTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UpsBypassEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of bypass table entries.  The number of
+            entries is given by the value of upsBypassNumLines."
+    ::= { upsBypass 3 }
+
+upsBypassEntry OBJECT-TYPE
+    SYNTAX     UpsBypassEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing information applicable to a
+            particular bypass input."
+    INDEX { upsBypassLineIndex }
+    ::= { upsBypassTable 1 }
+
+UpsBypassEntry ::= SEQUENCE {
+    upsBypassLineIndex  PositiveInteger,
+    upsBypassVoltage    NonNegativeInteger,
+    upsBypassCurrent    NonNegativeInteger,
+    upsBypassPower      NonNegativeInteger
+}
+
+upsBypassLineIndex OBJECT-TYPE
+    SYNTAX     PositiveInteger
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The bypass line identifier."
+    ::= { upsBypassEntry 1 }
+
+upsBypassVoltage OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present bypass voltage."
+    ::= { upsBypassEntry 2 }
+
+upsBypassCurrent OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 RMS Amp"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present bypass current."
+    ::= { upsBypassEntry 3 }
+
+upsBypassPower OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "Watts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present true power conveyed by the bypass."
+    ::= { upsBypassEntry 4 }
+
+--
+-- The Alarm group.
+--
+
+upsAlarm              OBJECT IDENTIFIER ::= { upsObjects 6 }
+
+upsAlarmsPresent OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The present number of active alarm conditions."
+    ::= { upsAlarm 1 }
+
+upsAlarmTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF UpsAlarmEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A list of alarm table entries.  The table contains
+            zero, one, or many rows at any moment, depending upon
+            the number of alarm conditions in effect.  The table
+            is initially empty at agent startup.  The agent
+            creates a row in the table each time a condition is
+            detected and deletes that row when that condition no
+            longer pertains.  The agent creates the first row with
+            upsAlarmId equal to 1, and increments the value of
+            upsAlarmId each time a new row is created, wrapping to
+            the first free value greater than or equal to 1 when
+            the maximum value of upsAlarmId would otherwise be
+            exceeded.  Consequently, after multiple operations,
+            the table may become sparse, e.g., containing entries
+            for rows 95, 100, 101, and 203 and the entries should
+            not be assumed to be in chronological order because
+            upsAlarmId might have wrapped.
+
+            Alarms are named by an AutonomousType (OBJECT
+            IDENTIFIER), upsAlarmDescr, to allow a single table to
+            reflect well known alarms plus alarms defined by a
+            particular implementation, i.e., as documented in the
+            private enterprise MIB definition for the device.  No
+            two rows will have the same value of upsAlarmDescr,
+            since alarms define conditions.  In order to meet this
+            requirement, care should be taken in the definition of
+            alarm conditions to insure that a system cannot enter
+            the same condition multiple times simultaneously.
+
+            The number of rows in the table at any given time is
+            reflected by the value of upsAlarmsPresent."
+    ::= { upsAlarm 2 }
+
+upsAlarmEntry OBJECT-TYPE
+    SYNTAX     UpsAlarmEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry containing information applicable to a
+
+            particular alarm."
+    INDEX { upsAlarmId }
+    ::= { upsAlarmTable 1 }
+
+UpsAlarmEntry ::= SEQUENCE {
+    upsAlarmId          PositiveInteger,
+    upsAlarmDescr       AutonomousType,
+    upsAlarmTime        TimeStamp
+}
+
+upsAlarmId OBJECT-TYPE
+    SYNTAX     PositiveInteger
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "A unique identifier for an alarm condition.  This
+            value must remain constant."
+    ::= { upsAlarmEntry 1 }
+
+upsAlarmDescr OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A reference to an alarm description object.  The
+            object referenced should not be accessible, but rather
+            be used to provide a unique description of the alarm
+            condition."
+    ::= { upsAlarmEntry 2 }
+
+upsAlarmTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime when the alarm condition was
+            detected.  If the alarm condition was detected at the
+            time of agent startup and presumably existed before
+            agent startup, the value of upsAlarmTime shall equal
+            0."
+    ::= { upsAlarmEntry 3 }
+
+--
+-- Well known alarm conditions.
+--
+
+upsWellKnownAlarms    OBJECT IDENTIFIER ::= { upsAlarm 3 }
+
+upsAlarmBatteryBad OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "One or more batteries have been determined to require
+            replacement."
+    ::= { upsWellKnownAlarms  1 }
+
+upsAlarmOnBattery OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The UPS is drawing power from the batteries."
+    ::= { upsWellKnownAlarms  2 }
+
+upsAlarmLowBattery OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The remaining battery run-time is less than or equal
+            to upsConfigLowBattTime."
+    ::= { upsWellKnownAlarms  3 }
+
+upsAlarmDepletedBattery OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The UPS will be unable to sustain the present load
+            when and if the utility power is lost."
+    ::= { upsWellKnownAlarms  4 }
+
+upsAlarmTempBad OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A temperature is out of tolerance."
+    ::= { upsWellKnownAlarms  5 }
+
+upsAlarmInputBad OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "An input condition is out of tolerance."
+    ::= { upsWellKnownAlarms  6 }
+
+upsAlarmOutputBad OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "An output condition (other than OutputOverload) is
+            out of tolerance."
+    ::= { upsWellKnownAlarms  7 }
+
+upsAlarmOutputOverload OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The output load exceeds the UPS output capacity."
+    ::= { upsWellKnownAlarms  8 }
+
+upsAlarmOnBypass OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The Bypass is presently engaged on the UPS."
+    ::= { upsWellKnownAlarms  9 }
+
+upsAlarmBypassBad OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The Bypass is out of tolerance."
+    ::= { upsWellKnownAlarms 10 }
+
+upsAlarmOutputOffAsRequested OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The UPS has shutdown as requested, i.e., the output
+            is off."
+    ::= { upsWellKnownAlarms 11 }
+
+upsAlarmUpsOffAsRequested OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The entire UPS has shutdown as commanded."
+    ::= { upsWellKnownAlarms 12 }
+
+upsAlarmChargerFailed OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "An uncorrected problem has been detected within the
+            UPS charger subsystem."
+    ::= { upsWellKnownAlarms 13 }
+
+upsAlarmUpsOutputOff OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The output of the UPS is in the off state."
+    ::= { upsWellKnownAlarms 14 }
+
+upsAlarmUpsSystemOff OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The UPS system is in the off state."
+    ::= { upsWellKnownAlarms 15 }
+
+upsAlarmFanFailure OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The failure of one or more fans in the UPS has been
+            detected."
+    ::= { upsWellKnownAlarms 16 }
+
+upsAlarmFuseFailure OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The failure of one or more fuses has been detected."
+    ::= { upsWellKnownAlarms 17 }
+
+upsAlarmGeneralFault OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A general fault in the UPS has been detected."
+    ::= { upsWellKnownAlarms 18 }
+
+upsAlarmDiagnosticTestFailed OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The result of the last diagnostic test indicates a
+            failure."
+    ::= { upsWellKnownAlarms 19 }
+
+upsAlarmCommunicationsLost OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A problem has been encountered in the communications
+            between the agent and the UPS."
+    ::= { upsWellKnownAlarms 20 }
+
+upsAlarmAwaitingPower OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The UPS output is off and the UPS is awaiting the
+            return of input power."
+    ::= { upsWellKnownAlarms 21 }
+
+upsAlarmShutdownPending OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A upsShutdownAfterDelay countdown is underway."
+    ::= { upsWellKnownAlarms 22 }
+
+upsAlarmShutdownImminent OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The UPS will turn off power to the load in less than
+            5 seconds; this may be either a timed shutdown or a
+            low battery shutdown."
+    ::= { upsWellKnownAlarms 23 }
+
+upsAlarmTestInProgress OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A test is in progress, as initiated and indicated by
+            the Test Group.  Tests initiated via other
+            implementation-specific mechanisms can indicate the
+            presence of the testing in the alarm table, if
+            desired, via a OBJECT-IDENTITY macro in the MIB
+            document specific to that implementation and are
+            outside the scope of this OBJECT-IDENTITY."
+    ::= { upsWellKnownAlarms 24 }
+
+--
+-- The Test Group
+--
+
+upsTest               OBJECT IDENTIFIER ::= { upsObjects 7 }
+
+upsTestId OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The test is named by an OBJECT IDENTIFIER which
+            allows a standard mechanism for the initiation of
+            tests, including the well known tests identified in
+            this document as well as those introduced by a
+            particular implementation, i.e., as documented in the
+            private enterprise MIB definition for the device.
+
+            Setting this variable initiates the named test. Sets
+            to this variable require the presence of
+            upsTestSpinLock in the same SNMP message.
+
+            The set request will be rejected with an appropriate
+            error message if the requested test cannot be
+            performed, including attempts to start a test when
+            another test is already in progress.  The status of
+            the current or last test is maintained in
+            upsTestResultsSummary. Tests in progress may be
+            aborted by setting the upsTestId variable to
+
+            upsTestAbortTestInProgress.
+
+            Read operations return the value of the name of the
+            test in progress if a test is in progress or the name
+            of the last test performed if no test is in progress,
+            unless no test has been run, in which case the well
+            known value upsTestNoTestsInitiated is returned."
+    ::= { upsTest 1 }
+
+-- see [6] for more information on the semantics of objects with
+-- syntax of TestAndIncr
+
+upsTestSpinLock OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "A spin lock on the test subsystem.  The spinlock is
+            used as follows.
+
+            Before starting a test, a manager-station should make
+            sure that a test is not in progress as follows:
+
+                try_again:
+                  get (upsTestSpinLock)
+                  while (upsTestResultsSummary == inProgress) {
+                    /* loop while a test is running for another
+            manager */
+                    short delay
+                    get (upsTestSpinLock)
+                  }
+                  lock_value = upsTestSpinLock
+                  /* no test in progress, start the test */
+                  set (upsTestSpinLock = lock_value, upsTestId =
+            requested_test)
+                  if (error_index == 1) { /* (upsTestSpinLock
+            failed) */
+                    /* if problem is not access control, then
+                        some other manager slipped in ahead of us
+            */
+                    goto try_again
+                  }
+                  if (error_index == 2) { /* (upsTestId) */
+                    /* cannot perform the test */
+                    give up
+                  }
+                  /* test started ok */
+                  /* wait for test completion by polling
+
+            upsTestResultsSummary */
+                  get (upsTestSpinLock, upsTestResultsSummary,
+            upsTestResultsDetail)
+                  while (upsTestResultsSummary == inProgress) {
+                    short delay
+                    get (upsTestSpinLock, upsTestResultsSummary,
+            upsTestResultsDetail)
+                  }
+                  /* when test completes, retrieve any additional
+            test results */
+                  /* if upsTestSpinLock == lock_value + 1, then
+            these are our test */
+                  /* results (as opposed to another manager's */
+                  The initial value of upsTestSpinLock at agent
+            initialization shall
+                  be 1."
+    ::= { upsTest 2 }
+
+upsTestResultsSummary OBJECT-TYPE
+    SYNTAX     INTEGER {
+        donePass(1),
+        doneWarning(2),
+        doneError(3),
+        aborted(4),
+        inProgress(5),
+        noTestsInitiated(6)
+    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The results of the current or last UPS diagnostics
+            test performed.  The values for donePass(1),
+            doneWarning(2), and doneError(3) indicate that the
+            test completed either successfully, with a warning, or
+            with an error, respectively.  The value aborted(4) is
+            returned for tests which are aborted by setting the
+            value of upsTestId to upsTestAbortTestInProgress.
+            Tests which have not yet concluded are indicated by
+            inProgress(5).  The value noTestsInitiated(6)
+            indicates that no previous test results are available,
+            such as is the case when no tests have been run since
+            the last reinitialization of the network management
+            subsystem and the system has no provision for non-
+            volatile storage of test results."
+    ::= { upsTest 3 }
+
+upsTestResultsDetail OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..255))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "Additional information about upsTestResultsSummary.
+            If no additional information available, a zero length
+            string is returned."
+    ::= { upsTest 4 }
+
+upsTestStartTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at the time the test in
+            progress was initiated, or, if no test is in progress,
+            the time the previous test was initiated.  If the
+            value of upsTestResultsSummary is noTestsInitiated(6),
+            upsTestStartTime has the value 0."
+    ::= { upsTest 5 }
+
+upsTestElapsedTime OBJECT-TYPE
+    SYNTAX     TimeInterval
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The amount of time, in TimeTicks, since the test in
+            progress was initiated, or, if no test is in progress,
+            the previous test took to complete.  If the value of
+            upsTestResultsSummary is noTestsInitiated(6),
+            upsTestElapsedTime has the value 0."
+    ::= { upsTest 6 }
+
+--
+-- Well known tests.
+--
+
+upsWellKnownTests     OBJECT IDENTIFIER ::= { upsTest 7 }
+
+upsTestNoTestsInitiated OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "No tests have been initiated and no test is in
+            progress."
+    ::= { upsWellKnownTests  1 }
+
+upsTestAbortTestInProgress OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The test in progress is to be aborted / the test in
+            progress was aborted."
+    ::= { upsWellKnownTests  2 }
+
+upsTestGeneralSystemsTest OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The manufacturer's standard test of UPS device
+            systems."
+    ::= { upsWellKnownTests  3 }
+
+upsTestQuickBatteryTest OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A test that is sufficient to determine if the battery
+            needs replacement."
+    ::= { upsWellKnownTests  4 }
+
+upsTestDeepBatteryCalibration OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The system is placed on battery to a discharge level,
+            set by the manufacturer, sufficient to determine
+            battery replacement and battery run-time with a high
+            degree of confidence.  WARNING:  this test will leave
+            the battery in a low charge state and will require
+            time for recharging to a level sufficient to provide
+            normal battery duration for the protected load."
+    ::= { upsWellKnownTests  5 }
+
+--
+-- The Control group.
+--
+
+upsControl            OBJECT IDENTIFIER ::= { upsObjects 8 }
+
+upsShutdownType OBJECT-TYPE
+    SYNTAX     INTEGER {
+        output(1),
+        system(2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "This object determines the nature of the action to be
+            taken at the time when the countdown of the
+
+            upsShutdownAfterDelay and upsRebootWithDuration
+            objects reaches zero.
+
+            Setting this object to output(1) indicates that
+            shutdown requests should cause only the output of the
+            UPS to turn off.  Setting this object to system(2)
+            indicates that shutdown requests will cause the entire
+            UPS system to turn off."
+    ::= { upsControl 1 }
+
+upsShutdownAfterDelay OBJECT-TYPE
+    SYNTAX     INTEGER (-1..2147483648)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "Setting this object will shutdown (i.e., turn off)
+            either the UPS output or the UPS system (as determined
+            by the value of upsShutdownType at the time of
+            shutdown) after the indicated number of seconds, or
+            less if the UPS batteries become depleted. Setting
+            this object to 0 will cause the shutdown to occur
+            immediately.  Setting this object to -1 will abort the
+            countdown.  If the system is already in the desired
+            state at the time the countdown reaches 0, then
+            nothing will happen.  That is, there is no additional
+            action at that time if upsShutdownType = system and
+            the system is already off.  Similarly, there is no
+            additional action at that time if upsShutdownType =
+            output and the output is already off.  When read,
+            upsShutdownAfterDelay will return the number of
+            seconds remaining until shutdown, or -1 if no shutdown
+            countdown is in effect.  On some systems, if the agent
+            is restarted while a shutdown countdown is in effect,
+            the countdown may be aborted.  Sets to this object
+            override any upsShutdownAfterDelay already in effect."
+    ::= { upsControl 2 }
+
+upsStartupAfterDelay OBJECT-TYPE
+    SYNTAX     INTEGER (-1..2147483648)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "Setting this object will start the output after the
+            indicated number of seconds, including starting the
+            UPS, if necessary.  Setting this object to 0 will
+            cause the startup to occur immediately.  Setting this
+
+            object to -1 will abort the countdown.  If the output
+            is already on at the time the countdown reaches 0,
+            then nothing will happen.  Sets to this object
+            override the effect of any upsStartupAfterDelay
+            countdown or upsRebootWithDuration countdown in
+            progress.  When read, upsStartupAfterDelay will return
+            the number of seconds until startup, or -1 if no
+            startup countdown is in effect.  If the countdown
+            expires during a utility failure, the startup shall
+            not occur until the utility power is restored.  On
+            some systems, if the agent is restarted while a
+            startup countdown is in effect, the countdown is
+            aborted."
+    ::= { upsControl 3 }
+
+upsRebootWithDuration OBJECT-TYPE
+    SYNTAX     INTEGER (-1..300)
+    UNITS      "seconds"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "Setting this object will immediately shutdown (i.e.,
+            turn off) either the UPS output or the UPS system (as
+            determined by the value of upsShutdownType at the time
+            of shutdown) for a period equal to the indicated
+            number of seconds, after which time the output will be
+            started, including starting the UPS, if necessary.  If
+            the number of seconds required to perform the request
+            is greater than the requested duration, then the
+            requested shutdown and startup cycle shall be
+            performed in the minimum time possible, but in no case
+            shall this require more than the requested duration
+            plus 60 seconds.  When read, upsRebootWithDuration
+            shall return the number of seconds remaining in the
+            countdown, or -1 if no countdown is in progress.  If
+            the startup should occur during a utility failure, the
+            startup shall not occur until the utility power is
+            restored."
+    ::= { upsControl 4 }
+
+upsAutoRestart OBJECT-TYPE
+    SYNTAX     INTEGER {
+        on(1),
+        off(2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "Setting this object to 'on' will cause the UPS system
+            to restart after a shutdown if the shutdown occurred
+            during a power loss as a result of either a
+            upsShutdownAfterDelay or an internal battery depleted
+            condition.  Setting this object to 'off' will prevent
+            the UPS system from restarting after a shutdown until
+            an operator manually or remotely explicitly restarts
+            it.  If the UPS is in a startup or reboot countdown,
+            then the UPS will not restart until that delay has
+            been satisfied."
+    ::= { upsControl 5 }
+
+--
+-- The Configuration group.
+--
+
+upsConfig             OBJECT IDENTIFIER ::= { upsObjects 9 }
+
+upsConfigInputVoltage OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the nominal input voltage.  On those
+            systems which support read-write access to this
+            object, if there is an attempt to set this variable to
+            a value that is not supported, the request must be
+            rejected and the agent shall respond with an
+            appropriate error message, i.e., badValue for SNMPv1,
+            or inconsistentValue for SNMPv2."
+    ::= { upsConfig 1 }
+
+upsConfigInputFreq OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 Hertz"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The nominal input frequency.  On those systems which
+            support read-write access to this object, if there is
+            an attempt to set this variable to a value that is not
+            supported, the request must be rejected and the agent
+            shall respond with an appropriate error message, i.e.,
+            badValue for SNMPv1, or inconsistentValue for SNMPv2."
+    ::= { upsConfig 2 }
+
+upsConfigOutputVoltage OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the nominal output voltage.  On
+            those systems which support read-write access to this
+            object, if there is an attempt to set this variable to
+            a value that is not supported, the request must be
+            rejected and the agent shall respond with an
+            appropriate error message, i.e., badValue for SNMPv1,
+            or inconsistentValue for SNMPv2."
+    ::= { upsConfig 3 }
+
+upsConfigOutputFreq OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "0.1 Hertz"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The nominal output frequency.  On those systems which
+            support read-write access to this object, if there is
+            an attempt to set this variable to a value that is not
+            supported, the request must be rejected and the agent
+            shall respond with an appropriate error message, i.e.,
+            badValue for SNMPv1, or inconsistentValue for SNMPv2."
+    ::= { upsConfig 4 }
+
+upsConfigOutputVA OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "Volt-Amps"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the nominal Volt-Amp rating."
+    ::= { upsConfig 5 }
+
+upsConfigOutputPower OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "Watts"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The magnitude of the nominal true power rating."
+    ::= { upsConfig 6 }
+
+upsConfigLowBattTime OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "minutes"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The value of upsEstimatedMinutesRemaining at which a
+            lowBattery condition is declared.  For agents which
+            support only discrete (discontinuous) values, then the
+            agent shall round up to the next supported value.  If
+            the requested value is larger than the largest
+            supported value, then the largest supported value
+            shall be selected."
+    ::= { upsConfig 7 }
+
+upsConfigAudibleStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+        disabled(1),
+        enabled(2),
+        muted(3)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The requested state of the audible alarm.  When in
+            the disabled state, the audible alarm should never
+            sound.  The enabled state is self-describing.  Setting
+            this object to muted(3) when the audible alarm is
+            sounding shall temporarily silence the alarm.  It will
+            remain muted until it would normally stop sounding and
+            the value returned for read operations during this
+            period shall equal muted(3).  At the end of this
+            period, the value shall revert to enabled(2).  Writes
+            of the value muted(3) when the audible alarm is not
+            sounding shall be accepted but otherwise shall have no
+            effect."
+    ::= { upsConfig 8 }
+
+upsConfigLowVoltageTransferPoint OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The minimum input line voltage allowed before the UPS
+            system transfers to battery backup."
+    ::= { upsConfig 9 }
+
+upsConfigHighVoltageTransferPoint OBJECT-TYPE
+    SYNTAX     NonNegativeInteger
+    UNITS      "RMS Volts"
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The maximum line voltage allowed before the UPS
+            system transfers to battery backup."
+    ::= { upsConfig 10 }
+
+--
+-- notifications, i.e., traps
+--
+upsTraps              OBJECT IDENTIFIER ::= { upsMIB 2 }
+
+-- This section defines the well-known notifications sent by
+-- UPS agents.
+-- Care must be taken to insure that no particular notification
+-- is sent to a single receiving entity more often than once
+-- every five seconds.
+
+upsTrapOnBattery NOTIFICATION-TYPE
+    OBJECTS { upsEstimatedMinutesRemaining, upsSecondsOnBattery,
+              upsConfigLowBattTime }
+    STATUS  current
+    DESCRIPTION
+            "The UPS is operating on battery power.  This trap is
+            persistent and is resent at one minute intervals until
+            the UPS either turns off or is no longer running on
+            battery."
+  ::= { upsTraps 1 }
+
+upsTrapTestCompleted NOTIFICATION-TYPE
+    OBJECTS { upsTestId, upsTestSpinLock,
+              upsTestResultsSummary, upsTestResultsDetail,
+              upsTestStartTime, upsTestElapsedTime }
+    STATUS  current
+    DESCRIPTION
+            "This trap is sent upon completion of a UPS diagnostic
+            test."
+  ::= { upsTraps 2 }
+
+upsTrapAlarmEntryAdded NOTIFICATION-TYPE
+    OBJECTS { upsAlarmId, upsAlarmDescr }
+    STATUS  current
+    DESCRIPTION
+            "This trap is sent each time an alarm is inserted into
+            to the alarm table.  It is sent on the insertion of
+
+            all alarms except for upsAlarmOnBattery and
+            upsAlarmTestInProgress."
+  ::= { upsTraps 3 }
+
+upsTrapAlarmEntryRemoved NOTIFICATION-TYPE
+    OBJECTS { upsAlarmId, upsAlarmDescr }
+    STATUS  current
+    DESCRIPTION
+            "This trap is sent each time an alarm is removed from
+            the alarm table.  It is sent on the removal of all
+            alarms except for upsAlarmTestInProgress."
+  ::= { upsTraps 4 }
+
+--
+-- conformance information
+--
+upsConformance        OBJECT IDENTIFIER ::= { upsMIB 3 }
+
+upsCompliances        OBJECT IDENTIFIER ::= { upsConformance 1 }
+
+--
+-- compliance statements
+--
+
+upsSubsetCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+            "The compliance statement for UPSs that only support
+            the two-contact communication protocol."
+    MODULE -- this module
+        MANDATORY-GROUPS  { upsSubsetIdentGroup,
+                  upsSubsetBatteryGroup, upsSubsetInputGroup,
+                  upsSubsetOutputGroup, upsSubsetAlarmGroup,
+                  upsSubsetControlGroup, upsSubsetConfigGroup }
+
+    OBJECT     upsBatteryStatus
+    SYNTAX     INTEGER {
+        batteryNormal(2),
+        batteryLow(3)
+    }
+    DESCRIPTION
+            "Support of the values unknown(1) and
+            batteryDepleted(4) is not required."
+
+    OBJECT     upsAlarmDescr
+    DESCRIPTION
+            "Support of all `well known' alarm types is not
+            required.  The well known alarm types which must be
+            supported are: upsAlarmOnBattery, upsAlarmLowBattery,
+            upsAlarmInputBad, upsAlarmUpsOutputOff,
+            upsAlarmUpsSystemOff, and upsAlarmTestInProgress."
+
+    OBJECT     upsOutputSource
+    SYNTAX     INTEGER {
+        normal(2),
+        battery(4)
+    }
+    DESCRIPTION
+            "Support of the values other(1), none(2), bypass(4),
+            booster(6) and reducer(7) is not required."
+
+    OBJECT     upsShutdownType
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required, i.e., compliant
+            systems need not support more than one shutdown type."
+
+    OBJECT     upsAutoRestart
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required, i.e., compliant
+            systems need not support more than one restart type."
+
+    OBJECT     upsConfigInputVoltage
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigInputFreq
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigOutputVoltage
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigOutputFreq
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+    ::= { upsCompliances 1 }
+
+upsBasicCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+            "The compliance statement for UPSs that support
+            full-featured functions, such as control."
+    MODULE -- this module
+        MANDATORY-GROUPS { upsBasicIdentGroup,
+                  upsBasicBatteryGroup, upsBasicInputGroup,
+                  upsBasicOutputGroup, upsBasicAlarmGroup,
+                  upsBasicTestGroup, upsBasicControlGroup,
+                  upsBasicConfigGroup }
+
+    OBJECT     upsAlarmDescr
+    DESCRIPTION
+            "Support of all `well known' alarm types is not
+            required.  The well known alarm types which must be
+            supported are: upsAlarmOnBattery, upsAlarmLowBattery,
+            upsAlarmDepletedBattery, upsAlarmTempBad,
+            upsAlarmInputBad, upsAlarmOutputOverload,
+            upsAlarmOnBypass, upsAlarmBypassBad,
+            upsAlarmOutputOffAsRequested,
+            upsAlarmUpsOffAsRequested, upsAlarmUpsOutputOff,
+            upsAlarmUpsSystemOff, upsAlarmGeneralFault,
+            upsAlarmDiagnosticTestFailed,
+            upsAlarmCommunicationsLost, upsAlarmShutdownPending,
+            and upsAlarmTestInProgress."
+
+    OBJECT     upsTestId
+    DESCRIPTION
+            "Support of all `well known' test types is not
+            required.  If no tests are supported, then the only
+            well known test type which must be supported is
+            upsTestNoTestsInitiated."
+
+    OBJECT     upsOutputSource
+    SYNTAX     INTEGER {
+        normal(2),
+        battery(4)
+    }
+    DESCRIPTION
+            "Support of the values other(1), none(2), bypass(4),
+            booster(6) and reducer(7) is not required."
+
+        GROUP upsBasicBypassGroup
+        DESCRIPTION
+            "The upsBasicBypassGroup is only required for UPSs
+            that have a Bypass present."
+    OBJECT     upsShutdownType
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required, i.e., compliant
+            systems need not support more than one shutdown type."
+
+    OBJECT     upsAutoRestart
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required, i.e., compliant
+            systems need not support more than one restart type."
+
+    OBJECT     upsConfigInputVoltage
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigInputFreq
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigOutputVoltage
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigOutputFreq
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigLowBattTime
+    DESCRIPTION
+            "Implementation of all possible values may be onerous
+            for some systems.  Consequently, not all possible
+            values must be supported.  However, at least two
+            different manufacturer-selected values must be
+            supported."
+    ::= { upsCompliances 2 }
+
+upsFullCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+            "The compliance statement for UPSs that support
+            advanced full-featured functions."
+    MODULE -- this module
+        MANDATORY-GROUPS { upsFullIdentGroup, upsFullBatteryGroup,
+                  upsFullInputGroup, upsFullOutputGroup,
+                  upsFullAlarmGroup, upsFullTestGroup,
+                  upsFullControlGroup, upsFullConfigGroup }
+
+    OBJECT     upsAlarmDescr
+    DESCRIPTION
+            "Support of all `well known' alarm types is not
+            required.  The well known alarm types which must be
+            supported are: upsAlarmBatteryBad, upsAlarmOnBattery,
+            upsAlarmLowBattery, upsAlarmDepletedBattery,
+            upsAlarmTempBad, upsAlarmInputBad, upsAlarmOnBypass,
+            upsAlarmBypassBad, upsAlarmOutputOffAsRequested,
+            upsAlarmUpsOffAsRequested, upsAlarmUpsOutputOff,
+            upsAlarmUpsSystemOff, upsAlarmGeneralFault,
+            upsAlarmDiagnosticTestFailed,
+            upsAlarmCommunicationsLost, upsAlarmShutdownPending,
+            and upsAlarmTestInProgress."
+
+    OBJECT     upsTestId
+    DESCRIPTION
+            "Support of all `well known' test types is not
+            required.  The well known test types which must be
+            supported are: upsTestNoTestsInitiated,
+            upsTestGeneralSystemsTest, and
+            upsTestQuickBatteryTest."
+
+    OBJECT     upsOutputSource
+    SYNTAX     INTEGER {
+        normal(2),
+        battery(4)
+    }
+    DESCRIPTION
+            "Support of the values other(1), none(2), bypass(4),
+            booster(6) and reducer(7) is not required."
+
+        GROUP upsFullBypassGroup
+        DESCRIPTION
+            "The upsFullBypassGroup is only required for UPSs that
+            have a Bypass present."
+
+    OBJECT     upsShutdownType
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required, i.e., compliant
+
+            systems need not support more than one shutdown type."
+
+    OBJECT     upsAutoRestart
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required, i.e., compliant
+            systems need not support more than one restart type."
+
+    OBJECT     upsConfigInputVoltage
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigInputFreq
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigOutputVoltage
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigOutputFreq
+    MIN-ACCESS read-only
+    DESCRIPTION
+            "Read-write access is not required."
+
+    OBJECT     upsConfigLowBattTime
+    DESCRIPTION
+            "Implementation of all possible values may be onerous
+            for some systems.  Consequently, not all possible
+            values must be supported.  However, at least two
+            different manufacturer-selected values must be
+            supported."
+    ::= { upsCompliances 3 }
+
+--
+-- units of conformance
+--
+
+-- summary at a glance:
+
+--                                      subset  basic   adv
+--upsIdentManufacturer                  x       x       x
+--upsIdentModel                         x       x       x
+
+--upsIdentUPSSoftwareVersion                    x       x
+--upsIdentAgentSoftwareVersion          x       x       x
+--upsIdentName                          x       x       x
+--upsIdentAttachedDevices               x               x
+--
+--upsBatteryStatus                      x       x       x  notes
+--upsSecondsOnBattery                   x       x       x
+--upsEstimatedMinutesRemaining                          x
+--upsEstimatedChargeRemaining                           x
+--upsBatteryVoltage
+--upsBatteryCurrent
+--upsBatteryTemperature
+--
+--upsInputLineBads                      x       x       x
+--upsInputNumLines                              x       x
+--upsInputFrequency                             x       x
+--upsInputVoltage                               x       x
+--upsInputCurrent
+--upsInputTruePower
+--
+--upsOutputSource                       x       x       x  notes
+--upsOutputFrequency                            x       x
+--upsOutputNumLines                             x       x
+--upsOutputVoltage                              x       x
+--upsOutputCurrent                                      x
+--upsOutputPower                                        x
+--upsOutputPercentLoad                                  x
+--
+--
+--upsBypassFrequency                            x       x  notes
+--upsBypassNumLines                             x       x
+--upsBypassVoltage                              x       x
+--upsBypassCurrent
+--upsBypassPower
+--
+--
+--upsAlarmsPresent                      x       x       x
+--upsAlarmDescr                         x       x       x  notes
+--upsAlarmTime                          x       x       x
+--
+--upsTestId                                     x       x  notes
+--upsTestSpinLock                               x       x
+--upsTestResultsSummary                         x       x
+--upsTestResultsDetail                          x       x
+--upsTestStartTime                              x       x
+--upsTestElapsedTime                            x       x
+--
+--upsShutdownType                       x       x       x  notes
+
+--upsShutdownAfterDelay                 x       x       x
+--upsStartupAfterDelay                          x       x
+--upsRebootWithDuration                         x       x
+--upsAutoRestart                        x       x       x  notes
+--
+--upsConfigInputVoltage                 x       x       x  notes
+--upsConfigInputFreq                    x       x       x  notes
+--upsConfigOutputVoltage                x       x       x  notes
+--upsConfigOutputFreq                   x       x       x  notes
+--upsConfigOutputVA                     x       x       x
+--upsConfigOutputPower                  x       x       x
+--upsConfigLowBattTime                          x       x  notes
+--upsConfigAudibleStatus                        x       x
+--upsConfigLowVoltageTransferPoint
+--upsConfigHighVoltageTransferPoint
+
+-- units of conformance
+upsGroups             OBJECT IDENTIFIER ::= { upsConformance 2 }
+
+upsSubsetGroups       OBJECT IDENTIFIER ::= { upsGroups 1 }
+
+upsSubsetIdentGroup OBJECT-GROUP
+    OBJECTS { upsIdentManufacturer, upsIdentModel,
+              upsIdentAgentSoftwareVersion, upsIdentName,
+              upsIdentAttachedDevices }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetIdentGroup defines objects which are
+            common across all UPSs which meet subset compliance.
+            Most devices which conform to the upsSubsetIdentGroup
+            will provide access to these objects via a proxy
+            agent.  If the proxy agent is compatible with multiple
+            UPS types, configuration of the proxy agent will
+            require specifying some of these values, either
+            individually, or as a group (perhaps through a table
+            lookup mechanism based on the UPS model number)."
+    ::= { upsSubsetGroups 1 }
+
+upsSubsetBatteryGroup OBJECT-GROUP
+    OBJECTS { upsBatteryStatus, upsSecondsOnBattery }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetBatteryGroup defines the objects that
+            are common to battery groups of two-contact UPSs."
+    ::= { upsSubsetGroups 2 }
+
+upsSubsetInputGroup OBJECT-GROUP
+
+    OBJECTS { upsInputLineBads }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetInputGroup defines the objects that are
+            common to the Input groups of two-contact UPSs."
+    ::= { upsSubsetGroups 3 }
+
+upsSubsetOutputGroup OBJECT-GROUP
+    OBJECTS { upsOutputSource }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetOutputGroup defines the objects that are
+            common to the Output groups of two-contact UPSs."
+    ::= { upsSubsetGroups 4 }
+
+-- { upsSubsetGroups 5 } is reserved for
+-- future use (upsSubsetBypassGroup)
+
+upsSubsetAlarmGroup OBJECT-GROUP
+    OBJECTS { upsAlarmsPresent, upsAlarmDescr, upsAlarmTime }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetAlarmGroup defines the objects that are
+            common to the Alarm groups of two-contact UPSs."
+    ::= { upsSubsetGroups 6 }
+
+-- { upsSubsetGroups 7 } is reserved for
+-- future use (upsSubsetTestGroup)
+
+upsSubsetControlGroup OBJECT-GROUP
+    OBJECTS { upsShutdownType, upsShutdownAfterDelay,
+                  upsAutoRestart }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetControlGroup defines the objects that
+            are common to the Control groups of two-contact UPSs."
+    ::= { upsSubsetGroups 8 }
+
+upsSubsetConfigGroup OBJECT-GROUP
+    OBJECTS { upsConfigInputVoltage, upsConfigInputFreq,
+              upsConfigOutputVoltage, upsConfigOutputFreq,
+              upsConfigOutputVA, upsConfigOutputPower }
+    STATUS  current
+    DESCRIPTION
+            "The upsSubsetConfigGroup defines the objects that are
+            common to the Config groups of two-contact UPSs."
+    ::= { upsSubsetGroups 9 }
+
+upsBasicGroups        OBJECT IDENTIFIER ::= { upsGroups 2 }
+
+upsBasicIdentGroup OBJECT-GROUP
+    OBJECTS { upsIdentManufacturer, upsIdentModel,
+              upsIdentUPSSoftwareVersion,
+              upsIdentAgentSoftwareVersion, upsIdentName }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicIdentGroup defines objects which are
+            common to the Ident group of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 1 }
+
+upsBasicBatteryGroup OBJECT-GROUP
+    OBJECTS { upsBatteryStatus, upsSecondsOnBattery }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicBatteryGroup defines the objects that are
+            common to the battery groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 2 }
+
+upsBasicInputGroup OBJECT-GROUP
+    OBJECTS { upsInputLineBads, upsInputNumLines,
+              upsInputFrequency, upsInputVoltage }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicInputGroup defines the objects that are
+            common to the Input groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 3 }
+
+upsBasicOutputGroup OBJECT-GROUP
+    OBJECTS { upsOutputSource, upsOutputFrequency,
+              upsOutputNumLines, upsOutputVoltage }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicOutputGroup defines the objects that are
+            common to the Output groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 4 }
+
+upsBasicBypassGroup OBJECT-GROUP
+    OBJECTS { upsBypassFrequency, upsBypassNumLines,
+              upsBypassVoltage }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicBypassGroup defines the objects that are
+
+            common to the Bypass groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 5 }
+
+upsBasicAlarmGroup OBJECT-GROUP
+    OBJECTS { upsAlarmsPresent, upsAlarmDescr, upsAlarmTime }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicAlarmGroup defines the objects that are
+            common to the Alarm  groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 6 }
+
+upsBasicTestGroup OBJECT-GROUP
+    OBJECTS { upsTestId, upsTestSpinLock,
+              upsTestResultsSummary, upsTestResultsDetail,
+              upsTestStartTime, upsTestElapsedTime }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicTestGroup defines the objects that are
+            common to the Test groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 7 }
+
+upsBasicControlGroup OBJECT-GROUP
+    OBJECTS { upsShutdownType, upsShutdownAfterDelay,
+              upsStartupAfterDelay, upsRebootWithDuration,
+              upsAutoRestart }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicControlGroup defines the objects that are
+            common to the Control groups of compliant UPSs which
+            support basic functions."
+    ::= { upsBasicGroups 8 }
+
+upsBasicConfigGroup OBJECT-GROUP
+    OBJECTS { upsConfigInputVoltage, upsConfigInputFreq,
+              upsConfigOutputVoltage, upsConfigOutputFreq,
+              upsConfigOutputVA, upsConfigOutputPower,
+              upsConfigLowBattTime, upsConfigAudibleStatus }
+    STATUS  current
+    DESCRIPTION
+            "The upsBasicConfigGroup defines the objects that are
+            common to the Config groups of UPSs which support
+            basic functions."
+    ::= { upsBasicGroups 9 }
+
+upsFullGroups         OBJECT IDENTIFIER ::= { upsGroups 3 }
+
+upsFullIdentGroup OBJECT-GROUP
+    OBJECTS { upsIdentManufacturer, upsIdentModel,
+              upsIdentUPSSoftwareVersion,
+              upsIdentAgentSoftwareVersion, upsIdentName,
+              upsIdentAttachedDevices }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullIdentGroup defines objects which are
+            common to the Ident group of fully compliant UPSs."
+    ::= { upsFullGroups 1 }
+
+upsFullBatteryGroup OBJECT-GROUP
+    OBJECTS { upsBatteryStatus, upsSecondsOnBattery,
+              upsEstimatedMinutesRemaining,
+              upsEstimatedChargeRemaining }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullBatteryGroup defines the objects that are
+            common to the battery groups of fully compliant UPSs."
+    ::= { upsFullGroups 2 }
+
+upsFullInputGroup OBJECT-GROUP
+    OBJECTS { upsInputLineBads, upsInputNumLines,
+              upsInputFrequency, upsInputVoltage }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullInputGroup defines the objects that are
+            common to the Input groups of fully compliant UPSs."
+    ::= { upsFullGroups 3 }
+
+upsFullOutputGroup OBJECT-GROUP
+    OBJECTS { upsOutputSource, upsOutputFrequency,
+              upsOutputNumLines, upsOutputVoltage,
+              upsOutputCurrent, upsOutputPower,
+              upsOutputPercentLoad }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullOutputGroup defines the objects that are
+            common to the Output groups of fully compliant UPSs."
+    ::= { upsFullGroups 4 }
+
+upsFullBypassGroup OBJECT-GROUP
+    OBJECTS { upsBypassFrequency, upsBypassNumLines,
+              upsBypassVoltage }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullBypassGroup defines the objects that are
+            common to the Bypass groups of fully compliant UPSs."
+    ::= { upsFullGroups 5 }
+
+upsFullAlarmGroup OBJECT-GROUP
+    OBJECTS { upsAlarmsPresent, upsAlarmDescr, upsAlarmTime }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullAlarmGroup defines the objects that are
+            common to the Alarm  groups of fully compliant UPSs."
+    ::= { upsFullGroups 6 }
+
+upsFullTestGroup OBJECT-GROUP
+    OBJECTS { upsTestId, upsTestSpinLock,
+              upsTestResultsSummary, upsTestResultsDetail,
+              upsTestStartTime, upsTestElapsedTime }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullTestGroup defines the objects that are
+            common to the Test groups of fully compliant UPSs."
+    ::= { upsFullGroups 7 }
+
+upsFullControlGroup OBJECT-GROUP
+    OBJECTS { upsShutdownType, upsShutdownAfterDelay,
+              upsStartupAfterDelay, upsRebootWithDuration,
+              upsAutoRestart }
+    STATUS  current
+    DESCRIPTION
+"The upsFullControlGroup defines the objects that are
+common to the Control groups of fully compliant UPSs."
+    ::= { upsFullGroups 8 }
+
+upsFullConfigGroup OBJECT-GROUP
+    OBJECTS { upsConfigInputVoltage, upsConfigInputFreq,
+              upsConfigOutputVoltage, upsConfigOutputFreq,
+              upsConfigOutputVA, upsConfigOutputPower,
+              upsConfigLowBattTime, upsConfigAudibleStatus }
+    STATUS  current
+    DESCRIPTION
+            "The upsFullConfigGroup defines the objects that are
+            common to the Config groups of fully compliant UPSs."
+    ::= { upsFullGroups 9 }
+
+END
diff --git a/snmp_builder/mibs/URI-TC-MIB.mib b/snmp_builder/mibs/URI-TC-MIB.mib
new file mode 100644
index 0000000..7daa083
--- /dev/null
+++ b/snmp_builder/mibs/URI-TC-MIB.mib
@@ -0,0 +1,133 @@
+URI-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2             FROM SNMPv2-SMI      -- [RFC2578]
+    TEXTUAL-CONVENTION                 FROM SNMPv2-TC;      -- [RFC2579]
+
+uriTcMIB MODULE-IDENTITY
+    LAST-UPDATED "200709100000Z" -- 10 September 2007
+    ORGANIZATION "IETF Operations and Management (OPS) Area"
+    CONTACT-INFO "EMail: ops-area@ietf.org
+                  Home page: http://www.ops.ietf.org/"
+    DESCRIPTION
+            "This MIB module defines textual conventions for
+            representing URIs, as defined by RFC 3986 STD 66."
+    REVISION     "200709100000Z" -- 10 September 2007
+    DESCRIPTION
+           "Initial revision, published as RFC 5017.
+
+            Copyright (C) The IETF Trust (2007).  This version of this
+            MIB module is part of RFC 5017; see the RFC itself for full
+
+            legal notices."
+    ::= { mib-2 164 }
+
+Uri ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "1a"
+   STATUS      current
+   DESCRIPTION
+            "A Uniform Resource Identifier (URI) as defined by STD 66.
+
+            Objects using this TEXTUAL-CONVENTION MUST be in US-ASCII
+            encoding, and MUST be normalized as described by RFC 3986
+            Sections 6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
+            percent-encoding is removed, and all case-insensitive
+            characters are set to lowercase except for hexadecimal
+            digits, which are normalized to uppercase as described in
+            Section 6.2.2.1.
+
+            The purpose of this normalization is to help provide unique
+            URIs.  Note that this normalization is not sufficient to
+            provide uniqueness.  Two URIs that are textually distinct
+            after this normalization may still be equivalent.
+
+            Objects using this TEXTUAL-CONVENTION MAY restrict the
+            schemes that they permit.  For example, 'data:' and 'urn:'
+            schemes might not be appropriate.
+
+            A zero-length URI is not a valid URI.  This can be used to
+            express 'URI absent' where required, for example when used
+            as an index field.
+
+            Where this TEXTUAL-CONVENTION is used for an index field,
+            it MUST be subtyped to restrict its length.  There is an
+            absolute limit of 128 subids for an OID, and it is not
+            efficient to have OIDs whose length approaches this
+            limit."
+   REFERENCE "RFC 3986 STD 66 and RFC 3305"
+   SYNTAX      OCTET STRING
+
+Uri255 ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "255a"
+   STATUS      current
+   DESCRIPTION
+            "A Uniform Resource Identifier (URI) as defined by STD 66.
+
+            Objects using this TEXTUAL-CONVENTION MUST be in US-ASCII
+            encoding, and MUST be normalized as described by RFC 3986
+            Sections 6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
+            percent-encoding is removed, and all case-insensitive
+
+            characters are set to lowercase except for hexadecimal
+            digits, which are normalized to uppercase as described in
+            Section 6.2.2.1.
+
+            The purpose of this normalization is to help provide unique
+            URIs.  Note that this normalization is not sufficient to
+            provide uniqueness.  Two URIs that are textually distinct
+            after this normalization may still be equivalent.
+
+            Objects using this TEXTUAL-CONVENTION MAY restrict the
+            schemes that they permit.  For example, 'data:' and 'urn:'
+            schemes might not be appropriate.
+
+            A zero-length URI is not a valid URI.  This can be used to
+            express 'URI absent' where required, for example when used
+            as an index field.
+
+            STD 66 URIs are of unlimited length.  Objects using this
+            TEXTUAL-CONVENTION impose a length limit on the URIs that
+            they can represent.  Where no length restriction is
+            required, objects SHOULD use the 'Uri' TEXTUAL-CONVENTION
+            instead.  Objects used as indices SHOULD subtype the 'Uri'
+            TEXTUAL-CONVENTION."
+   REFERENCE "RFC 3986 STD 66 and RFC 3305"
+   SYNTAX      OCTET STRING (SIZE (0..255))
+
+Uri1024 ::= TEXTUAL-CONVENTION
+   DISPLAY-HINT "1024a"
+   STATUS      current
+   DESCRIPTION
+            "A Uniform Resource Identifier (URI) as defined by STD 66.
+
+            Objects using this TEXTUAL-CONVENTION MUST be in US-ASCII
+            encoding, and MUST be normalized as described by RFC 3986
+            Sections 6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
+            percent-encoding is removed, and all case-insensitive
+            characters are set to lowercase except for hexadecimal
+            digits, which are normalized to uppercase as described in
+            Section 6.2.2.1.
+
+            The purpose of this normalization is to help provide unique
+            URIs.  Note that this normalization is not sufficient to
+            provide uniqueness.  Two URIs that are textually distinct
+            after this normalization may still be equivalent.
+
+            Objects using this TEXTUAL-CONVENTION MAY restrict the
+            schemes that they permit.  For example, 'data:' and 'urn:'
+            schemes might not be appropriate.
+
+            A zero-length URI is not a valid URI.  This can be used to
+            express 'URI absent' where required, for example when used
+            as an index field.
+
+            STD 66 URIs are of unlimited length.  Objects using this
+            TEXTUAL-CONVENTION impose a length limit on the URIs that
+            they can represent.  Where no length restriction is
+            required, objects SHOULD use the 'Uri' TEXTUAL-CONVENTION
+            instead.  Objects used as indices SHOULD subtype the 'Uri'
+            TEXTUAL-CONVENTION."
+   REFERENCE "RFC 3986 STD 66 and RFC 3305"
+   SYNTAX      OCTET STRING (SIZE (0..1024))
+
+END
diff --git a/snmp_builder/mibs/VDSL-LINE-EXT-MCM-MIB.mib b/snmp_builder/mibs/VDSL-LINE-EXT-MCM-MIB.mib
new file mode 100644
index 0000000..ea75eb4
--- /dev/null
+++ b/snmp_builder/mibs/VDSL-LINE-EXT-MCM-MIB.mib
@@ -0,0 +1,662 @@
+VDSL-LINE-EXT-MCM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+transmission,
+Unsigned32                      FROM SNMPv2-SMI         -- [RFC2578]
+RowStatus                       FROM SNMPv2-TC          -- [RFC2579]
+MODULE-COMPLIANCE,
+OBJECT-GROUP                    FROM SNMPv2-CONF        -- [RFC2580]
+vdslLineConfProfileName         FROM VDSL-LINE-MIB;     -- [RFC3728]
+
+vdslExtMCMMIB MODULE-IDENTITY
+   LAST-UPDATED "200504280000Z" --    April 28, 2005
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+         Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+         Chair:     Mike Sneed
+                    Sand Channel Systems
+         Postal:    P.O. Box 37324
+                    Raleigh NC 27627-732
+         Email:     sneedmike@hotmail.com
+         Phone:     +1 206 600 7022
+
+         Co-Chair/Co-editor:
+                    Bob Ray
+                    PESA Switching Systems, Inc.
+         Postal:    330-A Wynn Drive
+                    Huntsville, AL 35805
+                    USA
+         Email:     rray@pesa.com
+         Phone:     +1 256 726 9200 ext.  142
+
+         Co-editor: Menachem Dodge
+                    ECI Telecom Ltd.
+         Postal:    30 hasivim St.
+                    Petach Tikva 49517,
+                    Israel.
+         Email:     mbdodge@ieee.org
+         Phone:     +972 3 926 8421
+        "
+DESCRIPTION
+    "The VDSL-LINE-MIB found in RFC 3728 defines objects for
+    the management of a pair of VDSL transceivers at each end of
+    the VDSL line.  The VDSL-LINE-MIB configures and monitors the
+    line code independent parameters (TC layer) of the VDSL line.
+    This MIB module is an optional extension of the VDSL-LINE-MIB
+    and defines objects for configuration and monitoring of the
+    line code specific (LCS) elements (PMD layer) for VDSL lines
+    using MCM coding.  The objects in this extension MIB MUST NOT
+    be used for VDSL lines using Single Carrier Modulation (SCM)
+    line coding.  If an object in this extension MIB is referenced
+    by a line which does not use MCM, it has no effect on the
+    operation of that line.
+
+    Naming Conventions:
+        Vtuc -- (VTUC) transceiver at near (Central) end of line
+        Vtur -- (VTUR) transceiver at Remote end of line
+        Vtu  -- One of either Vtuc or Vtur
+        Curr -- Current
+        LCS  -- Line Code Specific
+        Max  -- Maximum
+        PSD  -- Power Spectral Density
+        Rx   -- Receive
+        Tx   -- Transmit
+
+    Copyright (C) The Internet Society (2005).  This version
+    of this MIB module is part of RFC 4070: see the RFC
+    itself for full legal notices."
+        REVISION "200504280000Z" --    April 28, 2005
+        DESCRIPTION "Initial version, published as RFC 4070."
+    ::= { transmission 229 }
+
+vdslLineExtMCMMib OBJECT IDENTIFIER ::= { vdslExtMCMMIB 1 }
+vdslLineExtMCMMibObjects OBJECT IDENTIFIER ::= {vdslLineExtMCMMib 1}
+
+--
+-- Multiple carrier modulation (MCM) configuration profile tables
+--
+
+vdslLineMCMConfProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineMCMConfProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains additional information on multiple
+        carrier VDSL lines.  One entry in this table reflects a
+        profile defined by a manager which can be used to
+        configure the VDSL line.
+
+        If an entry in this table is referenced by a line which
+        does not use MCM, it has no effect on the operation of that
+        line.
+
+        All read-create-objects defined in this table SHOULD be
+        stored persistently."
+    ::= { vdslLineExtMCMMibObjects  1 }
+
+vdslLineMCMConfProfileEntry OBJECT-TYPE
+    SYNTAX       VdslLineMCMConfProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a list of parameters that
+        represents the configuration of a multiple carrier
+        modulation VDSL modem."
+    INDEX { vdslLineConfProfileName }
+    ::= { vdslLineMCMConfProfileTable 1 }
+
+VdslLineMCMConfProfileEntry ::=
+    SEQUENCE
+        {
+        vdslLineMCMConfProfileTxWindowLength       Unsigned32,
+        vdslLineMCMConfProfileRowStatus            RowStatus
+        }
+
+vdslLineMCMConfProfileTxWindowLength OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..255)
+    UNITS        "samples"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the length of the transmit window, counted
+        in samples at the sampling rate corresponding to the
+        negotiated value of N."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileEntry 1 }
+
+vdslLineMCMConfProfileRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile is activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+
+        None of the columns in this row may be modified while the
+        row is in the 'active' state.
+
+        Before a profile can be deleted or taken out of
+        service, (by setting this object to `destroy' or
+        `notInService') it must first be unreferenced
+        from all associated lines."
+    ::= { vdslLineMCMConfProfileEntry 2 }
+
+vdslLineMCMConfProfileTxBandTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineMCMConfProfileTxBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains transmit band descriptor configuration
+        information for a VDSL line.  Each entry in this table
+        reflects the configuration for one of possibly many bands
+        with a multiple carrier modulation (MCM) VDSL line.
+        These entries are defined by a manager and can be used to
+        configure the VDSL line.
+
+        If an entry in this table is referenced by a line which
+        does not use MCM, it has no effect on the operation of that
+        line.
+
+        All read-create-objects defined in this table SHOULD be
+        stored persistently."
+    ::= { vdslLineExtMCMMibObjects  2 }
+
+vdslLineMCMConfProfileTxBandEntry OBJECT-TYPE
+    SYNTAX       VdslLineMCMConfProfileTxBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a transmit band descriptor, which
+        is defined by a start and a stop tone index."
+    INDEX { vdslLineConfProfileName,
+            vdslLineMCMConfProfileTxBandNumber }
+    ::= { vdslLineMCMConfProfileTxBandTable 1 }
+
+VdslLineMCMConfProfileTxBandEntry ::=
+    SEQUENCE
+        {
+        vdslLineMCMConfProfileTxBandNumber           Unsigned32,
+        vdslLineMCMConfProfileTxBandStart            Unsigned32,
+        vdslLineMCMConfProfileTxBandStop             Unsigned32,
+        vdslLineMCMConfProfileTxBandRowStatus        RowStatus
+        }
+
+vdslLineMCMConfProfileTxBandNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The index for this band descriptor entry."
+    ::= { vdslLineMCMConfProfileTxBandEntry 1 }
+
+vdslLineMCMConfProfileTxBandStart OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Start tone index for this band."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileTxBandEntry 2 }
+
+vdslLineMCMConfProfileTxBandStop OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Stop tone index for this band."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileTxBandEntry 3 }
+
+vdslLineMCMConfProfileTxBandRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+        A profile is activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+
+        Each entry must be internally consistent, the Stop Tone must
+        be greater than the Start Tone.  Each entry must also be
+        externally consistent, all entries indexed by a specific
+        profile must not overlap.  Validation of the profile will
+        check both internal and external consistency.
+
+        None of the columns in this row may be modified while the
+        row is in the 'active' state.
+
+        Before a profile can be deleted or taken out of
+        service, (by setting this object to `destroy' or
+        `notInService') it must be first unreferenced
+        from all associated lines."
+    ::= { vdslLineMCMConfProfileTxBandEntry 4 }
+
+vdslLineMCMConfProfileRxBandTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineMCMConfProfileRxBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains receive band descriptor configuration
+        information for a VDSL line.  Each entry in this table
+        reflects the configuration for one of possibly many bands
+        with a multiple carrier modulation (MCM) VDSL line.
+        These entries are defined by a manager and can be used to
+        configure the VDSL line.
+
+        If an entry in this table is referenced by a line which
+        does not use MCM, it has no effect on the operation of that
+        line.
+
+        All read-create-objects defined in this table SHOULD be
+        stored persistently."
+    ::= { vdslLineExtMCMMibObjects 3 }
+
+vdslLineMCMConfProfileRxBandEntry OBJECT-TYPE
+    SYNTAX       VdslLineMCMConfProfileRxBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a transmit band descriptor, which
+        is defined by a start and a stop tone index."
+    INDEX { vdslLineConfProfileName,
+            vdslLineMCMConfProfileRxBandNumber }
+    ::= { vdslLineMCMConfProfileRxBandTable 1 }
+
+VdslLineMCMConfProfileRxBandEntry ::=
+
+    SEQUENCE
+        {
+        vdslLineMCMConfProfileRxBandNumber           Unsigned32,
+        vdslLineMCMConfProfileRxBandStart            Unsigned32,
+        vdslLineMCMConfProfileRxBandStop             Unsigned32,
+        vdslLineMCMConfProfileRxBandRowStatus        RowStatus
+        }
+
+vdslLineMCMConfProfileRxBandNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The index for this band descriptor entry."
+    ::= { vdslLineMCMConfProfileRxBandEntry 1 }
+
+vdslLineMCMConfProfileRxBandStart OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Start tone index for this band."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileRxBandEntry 2 }
+
+vdslLineMCMConfProfileRxBandStop OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Stop tone index for this band."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileRxBandEntry 3 }
+
+vdslLineMCMConfProfileRxBandRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile is activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+        Each entry must be internally consistent, the Stop Tone must
+        be greater than the Start Tone.  Each entry must also be
+        externally consistent, all entries indexed by a specific
+
+        profile must not overlap.  Validation of the profile will
+        check both internal and external consistency.
+
+        None of the columns in this row may be modified while the
+        row is in the 'active' state.
+
+        Before a profile can be deleted or taken out of
+        service, (by setting this object to `destroy' or
+        `notInService') it must be first unreferenced
+        from all associated lines."
+    ::= { vdslLineMCMConfProfileRxBandEntry 4 }
+
+vdslLineMCMConfProfileTxPSDTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineMCMConfProfileTxPSDEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains transmit PSD mask descriptor
+        configuration information for a VDSL line.  Each entry in
+        this table reflects the configuration for one tone within
+        a multiple carrier modulation (MCM) VDSL line.  These
+        entries are defined by a manager and can be used to
+        configure the VDSL line.
+
+        If an entry in this table is referenced by a line which
+        does not use MCM, it has no effect on the operation of that
+        line.
+
+        All read-create-objects defined in this table SHOULD be
+        stored persistently."
+    ::= { vdslLineExtMCMMibObjects 4 }
+
+vdslLineMCMConfProfileTxPSDEntry OBJECT-TYPE
+    SYNTAX       VdslLineMCMConfProfileTxPSDEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a transmit PSD mask descriptor,
+        which defines the power spectral density (PSD) for a tone."
+    INDEX { vdslLineConfProfileName,
+            vdslLineMCMConfProfileTxPSDNumber }
+    ::= { vdslLineMCMConfProfileTxPSDTable 1 }
+
+VdslLineMCMConfProfileTxPSDEntry ::=
+    SEQUENCE
+        {
+        vdslLineMCMConfProfileTxPSDNumber            Unsigned32,
+        vdslLineMCMConfProfileTxPSDTone              Unsigned32,
+        vdslLineMCMConfProfileTxPSDPSD               Unsigned32,
+        vdslLineMCMConfProfileTxPSDRowStatus         RowStatus
+        }
+
+vdslLineMCMConfProfileTxPSDNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The index for this mask descriptor entry."
+    ::= { vdslLineMCMConfProfileTxPSDEntry 1 }
+
+vdslLineMCMConfProfileTxPSDTone OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The tone index for which the PSD is being specified."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileTxPSDEntry 2 }
+
+vdslLineMCMConfProfileTxPSDPSD OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "0.5dBm/Hz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Power Spectral Density level in steps of 0.5dBm/Hz with
+        an offset of -140dBm/Hz."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileTxPSDEntry 3 }
+
+    vdslLineMCMConfProfileTxPSDRowStatus OBJECT-TYPE
+        SYNTAX       RowStatus
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+            "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile is activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+
+        None of the columns in this row may be modified while the
+        row is in the 'active' state.
+
+        Before a profile can be deleted or taken out of
+
+        service, (by setting this object to `destroy' or
+        `notInService') it must be first unreferenced
+        from all associated lines."
+    ::= { vdslLineMCMConfProfileTxPSDEntry 4 }
+
+vdslLineMCMConfProfileMaxTxPSDTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineMCMConfProfileMaxTxPSDEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains transmit maximum PSD mask descriptor
+        configuration information for a VDSL line.  Each entry in
+        this table reflects the configuration for one tone within
+        a multiple carrier modulation (MCM) VDSL modem.  These
+        entries are defined by a manager and can be used to
+        configure the VDSL line.
+
+        If an entry in this table is referenced by a line which
+        does not use MCM, it has no effect on the operation of that
+        line.
+
+        All read-create-objects defined in this table SHOULD be
+        stored persistently."
+    ::= { vdslLineExtMCMMibObjects 5 }
+
+vdslLineMCMConfProfileMaxTxPSDEntry OBJECT-TYPE
+    SYNTAX       VdslLineMCMConfProfileMaxTxPSDEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a transmit PSD mask descriptor,
+        which defines the maximum power spectral density (PSD)
+        for a tone."
+    INDEX { vdslLineConfProfileName,
+            vdslLineMCMConfProfileMaxTxPSDNumber }
+    ::= { vdslLineMCMConfProfileMaxTxPSDTable 1 }
+
+VdslLineMCMConfProfileMaxTxPSDEntry ::=
+    SEQUENCE
+        {
+        vdslLineMCMConfProfileMaxTxPSDNumber            Unsigned32,
+        vdslLineMCMConfProfileMaxTxPSDTone              Unsigned32,
+        vdslLineMCMConfProfileMaxTxPSDPSD               Unsigned32,
+        vdslLineMCMConfProfileMaxTxPSDRowStatus         RowStatus
+        }
+
+vdslLineMCMConfProfileMaxTxPSDNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The index for this band descriptor entry."
+    ::= { vdslLineMCMConfProfileMaxTxPSDEntry 1 }
+
+vdslLineMCMConfProfileMaxTxPSDTone OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The tone index for which the PSD is being specified.
+         There must not be multiple rows defined, for a particular
+         profile, with the same value for this field."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileMaxTxPSDEntry 2 }
+
+vdslLineMCMConfProfileMaxTxPSDPSD OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "0.5dBm/Hz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Power Spectral Density level in steps of 0.5dBm/Hz with
+        an offset of -140dBm/Hz."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileMaxTxPSDEntry 3 }
+
+vdslLineMCMConfProfileMaxTxPSDRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+        A profile is activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+        There must be only one entry in this table for each tone
+        associated with a specific profile.  This will be checked
+        during the validation process.
+
+        None of the columns in this row may be modified while the
+        row is in the 'active' state.
+
+        Before a profile can be deleted or taken out of
+        service, (by setting this object to `destroy' or
+        `notInService') it must be first unreferenced
+        from all associated lines."
+    ::= { vdslLineMCMConfProfileMaxTxPSDEntry 4 }
+
+vdslLineMCMConfProfileMaxRxPSDTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineMCMConfProfileMaxRxPSDEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains maximum receive PSD mask descriptor
+        configuration information for a VDSL line.  Each entry in
+        this table reflects the configuration for one tone within
+        a multiple carrier modulation (MCM) VDSL modem.  These
+        entries are defined by a manager and can be used to
+        configure the VDSL line.
+
+        If an entry in this table is referenced by a line which
+        does not use MCM, it has no effect on the operation of that
+        line.
+
+        All read-create-objects defined in this table SHOULD be
+        stored persistently."
+    ::= { vdslLineExtMCMMibObjects 6 }
+
+vdslLineMCMConfProfileMaxRxPSDEntry OBJECT-TYPE
+    SYNTAX       VdslLineMCMConfProfileMaxRxPSDEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a transmit PSD mask descriptor,
+        which defines the power spectral density (PSD) for a
+        tone."
+    INDEX { vdslLineConfProfileName,
+            vdslLineMCMConfProfileMaxRxPSDNumber }
+    ::= { vdslLineMCMConfProfileMaxRxPSDTable 1 }
+
+VdslLineMCMConfProfileMaxRxPSDEntry ::=
+    SEQUENCE
+        {
+        vdslLineMCMConfProfileMaxRxPSDNumber            Unsigned32,
+        vdslLineMCMConfProfileMaxRxPSDTone              Unsigned32,
+        vdslLineMCMConfProfileMaxRxPSDPSD               Unsigned32,
+        vdslLineMCMConfProfileMaxRxPSDRowStatus         RowStatus
+        }
+
+vdslLineMCMConfProfileMaxRxPSDNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The index for this band descriptor entry."
+    ::= { vdslLineMCMConfProfileMaxRxPSDEntry 1 }
+
+vdslLineMCMConfProfileMaxRxPSDTone OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..4096)
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The tone index for which the PSD is being specified.
+         There must not be multiple rows defined, for a particular
+         profile, with the same value for this field."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileMaxRxPSDEntry 2 }
+
+vdslLineMCMConfProfileMaxRxPSDPSD OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "0.5dBm/Hz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Power Spectral Density level in steps of 0.5dBm/Hz with
+        an offset of -140dBm/Hz."
+    REFERENCE    "T1E1.4/2000-013R4"    -- Part 3, MCM
+    ::= { vdslLineMCMConfProfileMaxRxPSDEntry 3 }
+
+vdslLineMCMConfProfileMaxRxPSDRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile is activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+        There must be only one entry in this table for each tone
+        associated with a specific profile.  This will be checked
+        during the validation process.
+
+        None of the columns in this row may be modified while the
+        row is in the 'active' state.
+
+        Before a profile can be deleted or taken out of
+        service, (by setting this object to `destroy' or
+        `notInService') it must be first unreferenced
+        from all associated lines."
+    ::= { vdslLineMCMConfProfileMaxRxPSDEntry 4 }
+
+-- conformance information
+
+vdslLineExtMCMConformance OBJECT IDENTIFIER ::=
+                 { vdslLineExtMCMMib 2 }
+vdslLineExtMCMGroups OBJECT IDENTIFIER ::=
+                 { vdslLineExtMCMConformance 1 }
+vdslLineExtMCMCompliances OBJECT IDENTIFIER ::=
+                 { vdslLineExtMCMConformance 2 }
+
+vdslLineExtMCMMibCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which
+        manage VDSL interfaces."
+    MODULE  -- this module
+    MANDATORY-GROUPS
+    {
+        vdslLineExtMCMGroup
+    }
+    ::= { vdslLineExtMCMCompliances 1 }
+
+-- units of conformance
+
+    vdslLineExtMCMGroup OBJECT-GROUP
+        OBJECTS
+            {
+            vdslLineMCMConfProfileTxWindowLength,
+            vdslLineMCMConfProfileRowStatus,
+            vdslLineMCMConfProfileTxBandStart,
+            vdslLineMCMConfProfileTxBandStop,
+            vdslLineMCMConfProfileTxBandRowStatus,
+            vdslLineMCMConfProfileRxBandStart,
+            vdslLineMCMConfProfileRxBandStop,
+            vdslLineMCMConfProfileRxBandRowStatus,
+            vdslLineMCMConfProfileTxPSDTone,
+            vdslLineMCMConfProfileTxPSDPSD,
+            vdslLineMCMConfProfileTxPSDRowStatus,
+            vdslLineMCMConfProfileMaxTxPSDTone,
+            vdslLineMCMConfProfileMaxTxPSDPSD,
+            vdslLineMCMConfProfileMaxTxPSDRowStatus,
+            vdslLineMCMConfProfileMaxRxPSDTone,
+            vdslLineMCMConfProfileMaxRxPSDPSD,
+            vdslLineMCMConfProfileMaxRxPSDRowStatus
+            }
+         STATUS     current
+         DESCRIPTION
+             "A collection of objects providing configuration
+
+             information for a VDSL line based upon multiple
+             carrier modulation modem."
+     ::= { vdslLineExtMCMGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/VDSL-LINE-EXT-SCM-MIB.mib b/snmp_builder/mibs/VDSL-LINE-EXT-SCM-MIB.mib
new file mode 100644
index 0000000..0532ece
--- /dev/null
+++ b/snmp_builder/mibs/VDSL-LINE-EXT-SCM-MIB.mib
@@ -0,0 +1,420 @@
+VDSL-LINE-EXT-SCM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Integer32,
+transmission,
+Unsigned32                      FROM SNMPv2-SMI         -- [RFC2578]
+TEXTUAL-CONVENTION,
+TruthValue,
+RowStatus                       FROM SNMPv2-TC          -- [RFC2579]
+MODULE-COMPLIANCE,
+OBJECT-GROUP                    FROM SNMPv2-CONF        -- [RFC2580]
+ifIndex                         FROM IF-MIB             -- [RFC2863]
+vdslLineConfProfileName         FROM VDSL-LINE-MIB;     -- [RFC3728]
+
+vdslExtSCMMIB MODULE-IDENTITY
+   LAST-UPDATED "200504280000Z" --     April 28, 2005
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+         Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+         Chair:     Mike Sneed
+                    Sand Channel Systems
+         Postal:    P.O. Box 37324
+                    Raleigh NC 27627-732
+         Email:     sneedmike@hotmail.com
+         Phone:     +1 206 600 7022
+
+         Co-Chair/Co-editor:
+                    Bob Ray
+                    PESA Switching Systems, Inc.
+         Postal:    330-A Wynn Drive
+                    Huntsville, AL 35805
+                    USA
+         Email:     rray@pesa.com
+         Phone:     +1 256 726 9200 ext.  142
+
+         Co-editor: Menachem Dodge
+                    ECI Telecom Ltd.
+         Postal:    30 Hasivim St.
+                    Petach Tikva 49517,
+                    Israel
+         Email:     mbdodge@ieee.org
+         Phone:     +972 3 926 8421
+        "
+DESCRIPTION
+   "The VDSL-LINE-MIB found in RFC 3728 defines objects for the
+   management of a pair of VDSL transceivers at each end of the VDSL
+   line.  The VDSL-LINE-MIB configures and monitors the line code
+   independent parameters (TC layer) of the VDSL line.  This MIB
+   module is an optional extension of the VDSL-LINE-MIB and defines
+   objects for configuration and monitoring of the line code specific
+   (LCS) elements (PMD layer) for VDSL lines using SCM coding.  The
+   objects in this extension MIB MUST NOT be used for VDSL lines
+   using Multiple Carrier Modulation (MCM) line coding.  If an object
+   in this extension MIB is referenced by a line which does not use
+   SCM, it has no effect on the operation of that line.
+
+   Naming Conventions:
+
+      Vtuc -- VDSL transceiver at near (Central) end of line
+      Vtur -- VDSL transceiver at Remote end of line
+      Vtu  -- One of either Vtuc or Vtur
+      Curr -- Current
+      Atn  -- Attenuation
+      LCS  -- Line Code Specific
+      Max  -- Maximum
+      Mgn  -- Margin
+      PSD  -- Power Spectral Density
+      Rx   -- Receive
+      Snr  -- Signal to Noise Ratio
+      Tx   -- Transmit
+
+   Copyright (C) The Internet Society (2005).  This version
+   of this MIB module is part of RFC 4069: see the RFC
+   itself for full legal notices."
+           REVISION "200504280000Z" --     April 28, 2005
+           DESCRIPTION "Initial version, published as RFC 4069."
+       ::= { transmission 228 }
+
+       vdslLineExtSCMMib    OBJECT IDENTIFIER ::= { vdslExtSCMMIB 1 }
+       vdslLineExtSCMMibObjects OBJECT IDENTIFIER ::=
+                                              { vdslLineExtSCMMib 1 }
+--
+
+-- textual conventions used in this MIB
+--
+
+VdslSCMBandId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+       "This data type is used as the syntax for the VDSL SCM Band
+        Identity.  Attributes with this syntax identify the SCM Band
+        referred to.  Specified as an INTEGER, the possible values
+        are:
+
+        optionalBand (1)  -- the optional Band range [25kHz - 138kHz]
+        firstDownstreamBand (2)  -- first Downstream Band
+        firstUpstreamBand (3)    -- first Upstream Band
+        secondDownstreamBand (4) -- second Downstream Band
+        secondUpstreamBand (5)   -- second Upstream Band
+        thirdDownstreamBand (6)  -- third Downstream Band
+        thirdUpstreamBand (7)    -- third Upstream Band"
+    SYNTAX      INTEGER       {  optionalBand (1),
+                                 firstDownstreamBand (2),
+                                 firstUpstreamBand (3),
+                                 secondDownstreamBand (4),
+                                 secondUpstreamBand (5),
+                                 thirdDownstreamBand (6),
+                                 thirdUpstreamBand(7) }
+
+--
+-- Single carrier modulation (SCM) configuration profile tables
+--
+
+vdslLineSCMConfProfileBandTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineSCMConfProfileBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table contains transmit band descriptor configuration
+        information for a VDSL line.  Each entry in this table
+        reflects the configuration for one of possibly many bands
+        of a single carrier modulation (SCM) VDSL line.  For each
+        profile which is associated with a VDSL line using SCM
+        line coding, five entries in this table will exist, one for
+        each of the five bands.  Bands which are not in use will be
+        marked as unused.  These entries are defined by a manager
+        and can be used to configure the VDSL line.  If an entry in
+
+        this table is referenced by a line which does not use SCM,
+        it has no effect on the operation of that line."
+    ::= { vdslLineExtSCMMibObjects 1 }
+
+vdslLineSCMConfProfileBandEntry OBJECT-TYPE
+    SYNTAX       VdslLineSCMConfProfileBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "Each entry consists of a list of parameters that
+        represents the configuration of a single carrier
+        modulation VDSL modem transmit band.
+
+        A default profile with an index of 'DEFVAL', will
+        always exist and its parameters will be set to vendor
+        specific values, unless otherwise specified in this
+        document.
+
+        All read-create objects defined in this MIB module SHOULD be
+        stored persistently."
+    INDEX { vdslLineConfProfileName,
+     vdslLineSCMConfProfileBandId }
+    ::= { vdslLineSCMConfProfileBandTable 1 }
+
+VdslLineSCMConfProfileBandEntry ::=
+    SEQUENCE
+       {
+       vdslLineSCMConfProfileBandId                VdslSCMBandId,
+       vdslLineSCMConfProfileBandInUse             TruthValue,
+       vdslLineSCMConfProfileBandCenterFrequency   Unsigned32,
+       vdslLineSCMConfProfileBandSymbolRate        Unsigned32,
+       vdslLineSCMConfProfileBandConstellationSize Unsigned32,
+       vdslLineSCMConfProfileBandTransmitPSDLevel  Unsigned32,
+       vdslLineSCMConfProfileBandRowStatus         RowStatus
+       }
+
+vdslLineSCMConfProfileBandId OBJECT-TYPE
+    SYNTAX      VdslSCMBandId
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+       "The BandId for this entry, which specifies which band
+        is being referred to."
+    ::= { vdslLineSCMConfProfileBandEntry 1 }
+
+vdslLineSCMConfProfileBandInUse OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-create
+    STATUS  current
+    DESCRIPTION
+       "Indicates whether this band is in use.
+        If set to True this band is in use."
+    ::= { vdslLineSCMConfProfileBandEntry 2 }
+
+vdslLineSCMConfProfileBandCenterFrequency OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "Hz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "Specifies the center frequency in Hz"
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMConfProfileBandEntry 3 }
+
+vdslLineSCMConfProfileBandSymbolRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "baud"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The requested symbol rate in baud."
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMConfProfileBandEntry 4 }
+
+vdslLineSCMConfProfileBandConstellationSize OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..16)
+    UNITS        "log2"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "Specifies the constellation size."
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMConfProfileBandEntry 5 }
+
+vdslLineSCMConfProfileBandTransmitPSDLevel OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "-0.25 dBm/Hz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "The requested transmit power spectral density for the VDSL
+        modem.  The Actual value in -0.25 dBm/Hz."
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMConfProfileBandEntry 6  }
+
+vdslLineSCMConfProfileBandRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+       "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile activated by setting this object to `active'.
+        When `active' is set, the system will validate the profile.
+
+        None of the columns in this row may be modified while the
+        row is in the `active' state.
+
+        Before a profile can be deleted or taken out of
+        service, (by setting this object to `destroy' or
+        `notInService') it must be first unreferenced
+        from all associated lines."
+    ::= { vdslLineSCMConfProfileBandEntry 7 }
+
+--
+-- SCM physical band
+--
+
+vdslLineSCMPhysBandTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineSCMPhysBandEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table provides one row for each SCM Vtu band.  This
+        table is read only as it reflects the current physical
+        parameters of each band.  For each ifIndex which is
+        associated with a VDSL line using SCM line coding, five
+        entries in this table will exist, one for each of the
+        five bands.  Bands which are not in use will be marked
+        as unused."
+    ::= { vdslLineExtSCMMibObjects 2 }
+
+vdslLineSCMPhysBandEntry OBJECT-TYPE
+    SYNTAX        VdslLineSCMPhysBandEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+       "An entry in the vdslLineSCMPhysBandTable."
+    INDEX { ifIndex,
+            vdslLineSCMPhysBandId  }
+    ::= { vdslLineSCMPhysBandTable 1 }
+
+VdslLineSCMPhysBandEntry ::=
+    SEQUENCE
+        {
+        vdslLineSCMPhysBandId                    VdslSCMBandId,
+        vdslLineSCMPhysBandInUse                 TruthValue,
+        vdslLineSCMPhysBandCurrCenterFrequency   Unsigned32,
+        vdslLineSCMPhysBandCurrSymbolRate        Unsigned32,
+        vdslLineSCMPhysBandCurrConstellationSize Unsigned32,
+        vdslLineSCMPhysBandCurrPSDLevel          Unsigned32,
+        vdslLineSCMPhysBandCurrSnrMgn            Integer32,
+        vdslLineSCMPhysBandCurrAtn               Unsigned32
+        }
+
+vdslLineSCMPhysBandId OBJECT-TYPE
+    SYNTAX      VdslSCMBandId
+    MAX-ACCESS  not-accessible
+    STATUS  current
+    DESCRIPTION
+        "The BandId for this entry, which specifies which band
+         is being referred to."
+    ::= { vdslLineSCMPhysBandEntry 1 }
+
+vdslLineSCMPhysBandInUse OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+       "Indicates whether this band is in use.
+        If set to True this band is in use."
+    ::= { vdslLineSCMPhysBandEntry 2 }
+
+vdslLineSCMPhysBandCurrCenterFrequency OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "Hz"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The current center frequency in Hz for this band."
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMPhysBandEntry 3 }
+
+vdslLineSCMPhysBandCurrSymbolRate    OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "baud"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The current value of the symbol rate in baud for this
+        band."
+   REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+   ::= { vdslLineSCMPhysBandEntry 4 }
+
+vdslLineSCMPhysBandCurrConstellationSize OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..16)
+    UNITS        "log2"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The current constellation size on this band."
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMPhysBandEntry 5 }
+
+vdslLineSCMPhysBandCurrPSDLevel    OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "- 0.25 dBm/Hz"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+       "The transmit power spectral density for the
+        VDSL modem."
+    REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
+    ::= { vdslLineSCMPhysBandEntry 6 }
+
+vdslLineSCMPhysBandCurrSnrMgn OBJECT-TYPE
+    SYNTAX        Integer32
+    UNITS         "0.25 dB"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+       "Noise margin as seen by this Vtu and band with respect
+        to its received signal in 0.25 dB."
+    ::= { vdslLineSCMPhysBandEntry 7 }
+
+vdslLineSCMPhysBandCurrAtn OBJECT-TYPE
+    SYNTAX        Unsigned32 (0..255)
+    UNITS         "0.25 dB"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+       "Measured difference in the total power transmitted by
+        the peer Vtu on this band and the total power received
+        by this Vtu on this band in 0.25 dB."
+    ::= { vdslLineSCMPhysBandEntry 8 }
+
+-- conformance information
+
+vdslLineExtSCMConformance OBJECT IDENTIFIER ::=
+                                            { vdslLineExtSCMMib 2 }
+vdslLineExtSCMGroups OBJECT IDENTIFIER ::=
+                                    { vdslLineExtSCMConformance 1 }
+vdslLineExtSCMCompliances OBJECT IDENTIFIER ::=
+                                    { vdslLineExtSCMConformance 2 }
+
+vdslLineExtSCMMibCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+       "The compliance statement for SNMP entities which
+        manage VDSL interfaces."
+
+    MODULE  -- this module
+
+    MANDATORY-GROUPS
+    {
+      vdslLineExtSCMGroup
+    }
+    ::= { vdslLineExtSCMCompliances 1 }
+
+-- units of conformance
+
+vdslLineExtSCMGroup    OBJECT-GROUP
+    OBJECTS
+        {
+        vdslLineSCMConfProfileBandInUse,
+        vdslLineSCMConfProfileBandTransmitPSDLevel,
+        vdslLineSCMConfProfileBandSymbolRate,
+        vdslLineSCMConfProfileBandConstellationSize,
+        vdslLineSCMConfProfileBandCenterFrequency,
+        vdslLineSCMConfProfileBandRowStatus,
+        vdslLineSCMPhysBandInUse,
+        vdslLineSCMPhysBandCurrPSDLevel,
+        vdslLineSCMPhysBandCurrSymbolRate,
+        vdslLineSCMPhysBandCurrConstellationSize,
+        vdslLineSCMPhysBandCurrCenterFrequency,
+        vdslLineSCMPhysBandCurrSnrMgn,
+        vdslLineSCMPhysBandCurrAtn
+
+        }
+    STATUS      current
+    DESCRIPTION
+       "A collection of objects providing configuration
+        information for a VDSL line based upon single carrier
+        modulation modem."
+    ::= { vdslLineExtSCMGroups 1 }
+
+END
diff --git a/snmp_builder/mibs/VDSL-LINE-MIB.mib b/snmp_builder/mibs/VDSL-LINE-MIB.mib
new file mode 100644
index 0000000..f31fc51
--- /dev/null
+++ b/snmp_builder/mibs/VDSL-LINE-MIB.mib
@@ -0,0 +1,2844 @@
+VDSL-LINE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Gauge32,
+Integer32,
+Unsigned32,
+NOTIFICATION-TYPE,
+transmission                    FROM SNMPv2-SMI          -- [RFC2578]
+ZeroBasedCounter64              FROM HCNUM-TC            -- [RFC2856]
+TEXTUAL-CONVENTION,
+RowStatus,
+TruthValue                      FROM SNMPv2-TC           -- [RFC2579]
+HCPerfValidIntervals,
+HCPerfInvalidIntervals,
+HCPerfTimeElapsed,
+HCPerfIntervalThreshold,
+HCPerfCurrentCount,
+HCPerfIntervalCount             FROM HC-PerfHist-TC-MIB  -- [RFC3705]
+MODULE-COMPLIANCE,
+OBJECT-GROUP,
+NOTIFICATION-GROUP              FROM SNMPv2-CONF         -- [RFC2580]
+ifIndex                         FROM IF-MIB              -- [RFC2863]
+SnmpAdminString                 FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]
+
+vdslMIB MODULE-IDENTITY
+   LAST-UPDATED "200402190000Z" -- February 19, 2004
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+          Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+          Chair:     Mike Sneed
+                     Sand Channel Systems
+          Postal:    P.O.  Box 37324
+                     Raleigh, NC 27627-7324
+                     USA
+          Email:     sneedmike@hotmail.com
+          Phone:     +1 206 600 7022
+
+          Co-editor: Bob Ray
+                     PESA Switching Systems, Inc.
+          Postal:    330-A Wynn Drive
+                     Huntsville, AL 35805
+                     USA
+          Email:     rray@pesa.com
+          Phone:     +1 256 726 9200 ext.  142
+
+          Co-editor: Rajesh Abbi
+                     Alcatel USA
+          Postal:    2301 Sugar Bush Road
+                     Raleigh, NC 27612-3339
+                     USA
+          Email:     Rajesh.Abbi@alcatel.com
+          Phone:     +1 919 850 6194
+        "
+DESCRIPTION
+    "The MIB module defining objects for the management of a pair
+    of VDSL transceivers at each end of the VDSL line.  Each such
+    line has an entry in an ifTable which may include multiple
+    transceiver lines.  An agent may reside at either end of the
+    VDSL line.  However, the MIB is designed to require no
+    management communication between them beyond that inherent in
+    the low-level VDSL line protocol.  The agent may monitor and
+    control this protocol for its needs.
+
+    VDSL lines may support optional Fast or Interleaved channels.
+    If these are supported, additional entries corresponding to the
+    supported channels must be created in the ifTable.  Thus a VDSL
+    line that supports both channels will have three entries in the
+    ifTable, one for each physical, fast, and interleaved, whose
+    ifType values are equal to vdsl(97), fast(125), and
+    interleaved(124), respectively.  The ifStackTable is used to
+    represent the relationship between the entries.
+
+    Naming Conventions:
+        Vtuc -- (VTUC) transceiver at near (Central) end of line
+        Vtur -- (VTUR) transceiver at Remote end of line
+        Vtu  -- One of either Vtuc or Vtur
+        Curr -- Current
+        Prev -- Previous
+        Atn  -- Attenuation
+        ES   -- Errored Second.
+        SES  -- Severely Errored Second
+        UAS  -- Unavailable Second
+        LCS  -- Line Code Specific
+        Lof  -- Loss of Frame
+        Lol  -- Loss of Link
+        Los  -- Loss of Signal
+        Lpr  -- Loss of Power
+        xxxs -- Sum of Seconds in which xxx has occured
+                (e.g., xxx = Lof, Los, Lpr, Lol)
+        Max  -- Maximum
+        Mgn  -- Margin
+        Min  -- Minimum
+        Psd  -- Power Spectral Density
+        Snr  -- Signal to Noise Ratio
+        Tx   -- Transmit
+        Blks -- Blocks
+
+    Copyright (C) The Internet Society (2004).  This version
+    of this MIB module is part of RFC 3728: see the RFC
+    itself for full legal notices."
+       REVISION "200402190000Z" -- February 19, 2004
+       DESCRIPTION "Initial version, published as RFC 3728."
+   ::= { transmission 97 }
+
+vdslLineMib    OBJECT IDENTIFIER ::= { vdslMIB 1 }
+vdslMibObjects OBJECT IDENTIFIER ::= { vdslLineMib 1 }
+
+--
+-- textual conventions used in this MIB
+--
+
+VdslLineCodingType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "This data type is used as the syntax for the VDSL Line
+        Code.  Attributes with this syntax identify the line coding
+        used.  Specified as an INTEGER, the three values are:
+
+        other(1)  -- none of the following
+        mcm(2)    -- Multiple Carrier Modulation
+        scm(3)    -- Single Carrier Modulation"
+    SYNTAX  INTEGER
+        {
+        other(1),
+        mcm(2),
+        scm(3)
+        }
+
+VdslLineEntity ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "Identifies a transceiver as being either Vtuc or Vtur.
+        A VDSL line consists of two transceivers, a Vtuc and a
+        Vtur.  Attributes with this syntax reference the two sides
+        of a line.  Specified as an INTEGER, the two values are:
+
+        vtuc(1)  -- central site transceiver
+        vtur(2)  -- remote site transceiver"
+    SYNTAX  INTEGER
+        {
+        vtuc(1),
+        vtur(2)
+        }
+
+--
+-- objects
+--
+
+vdslLineTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table includes common attributes describing
+        both ends of the line.  It is required for all VDSL
+        physical interfaces.  VDSL physical interfaces are
+        those ifEntries where ifType is equal to vdsl(97)."
+    ::= { vdslMibObjects 1 }
+
+vdslLineEntry OBJECT-TYPE
+    SYNTAX       VdslLineEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "An entry in the vdslLineTable."
+    INDEX { ifIndex }
+    ::= { vdslLineTable 1 }
+
+VdslLineEntry ::=
+    SEQUENCE
+        {
+        vdslLineCoding                 VdslLineCodingType,
+        vdslLineType                   INTEGER,
+        vdslLineConfProfile            SnmpAdminString,
+        vdslLineAlarmConfProfile       SnmpAdminString
+        }
+
+vdslLineCoding OBJECT-TYPE
+    SYNTAX       VdslLineCodingType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Specifies the VDSL coding type used on this line."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslLineEntry 1 }
+
+vdslLineType OBJECT-TYPE
+    SYNTAX       INTEGER
+        {
+        noChannel(1),         -- no channels exist
+        fastOnly(2),          -- only fast channel exists
+        interleavedOnly(3),   -- only interleaved channel exists
+        fastOrInterleaved(4), -- either fast or interleaved channel
+                              -- exist, but only one at a time
+        fastAndInterleaved(5) -- both fast and interleaved channels
+                              -- exist
+        }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Defines the type of VDSL physical line entity that exists,
+        by defining whether and how the line is channelized.  If
+
+        the line is channelized,  the value will be other than
+        noChannel(1).  This object defines which channel type(s)
+        are supported.  Defined values are:
+
+        noChannel(1)          -- no channels exist
+        fastOnly(2)           -- only fast channel exists
+        interleavedOnly(3)    -- only interleaved channel exists
+        fastOrInterleaved(4)  -- either fast or interleaved channel
+                              -- exist, but only one at a time
+        fastAndInterleaved(5) -- both fast and interleaved channels
+                              -- exist
+
+        Note that 'slow' and 'interleaved' refer to the same
+        channel.  In the case that the line is channelized, the
+        manager can use the ifStackTable to determine the ifIndex
+        for the associated channel(s)."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslLineEntry 2 }
+
+vdslLineConfProfile OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The value of this object identifies the row in the VDSL
+        Line Configuration Profile Table, vdslLineConfProfileTable,
+        which applies for this VDSL line, and channels if
+        applicable.
+
+        This object MUST be maintained in a persistent manner."
+    DEFVAL       { "DEFVAL" }
+    ::= { vdslLineEntry 3 }
+
+vdslLineAlarmConfProfile OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The value of this object identifies the row in the VDSL
+        Line Alarm Configuration Profile Table,
+        vdslLineAlarmConfProfileTable, which applies to this
+        VDSL line, and channels if applicable.
+
+        This object MUST be maintained in a persistent manner."
+    DEFVAL       { "DEFVAL" }
+    ::= { vdslLineEntry 4 }
+
+vdslPhysTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslPhysEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each Vtu.  Each row
+        contains the Physical Layer Parameters table for that
+        Vtu.  VDSL physical interfaces are those ifEntries where
+        ifType is equal to vdsl(97)."
+    ::= { vdslMibObjects 2 }
+
+vdslPhysEntry OBJECT-TYPE
+    SYNTAX       VdslPhysEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "An entry in the vdslPhysTable."
+    INDEX { ifIndex,
+            vdslPhysSide }
+    ::= { vdslPhysTable 1 }
+
+VdslPhysEntry ::=
+    SEQUENCE
+        {
+        vdslPhysSide                   VdslLineEntity,
+        vdslPhysInvSerialNumber        SnmpAdminString,
+        vdslPhysInvVendorID            SnmpAdminString,
+        vdslPhysInvVersionNumber       SnmpAdminString,
+        vdslPhysCurrSnrMgn             Integer32,
+        vdslPhysCurrAtn                Gauge32,
+        vdslPhysCurrStatus             BITS,
+        vdslPhysCurrOutputPwr          Integer32,
+        vdslPhysCurrAttainableRate     Gauge32,
+        vdslPhysCurrLineRate           Gauge32
+        }
+
+vdslPhysSide OBJECT-TYPE
+    SYNTAX       VdslLineEntity
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Identifies whether the transceiver is the Vtuc or Vtur."
+    ::= { vdslPhysEntry 1 }
+
+vdslPhysInvSerialNumber OBJECT-TYPE
+    SYNTAX       SnmpAdminString(SIZE (0..32))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The vendor specific string that identifies the
+
+        vendor equipment."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPhysEntry 2 }
+
+vdslPhysInvVendorID OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..16))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The vendor ID code is a copy of the binary vendor
+        identification field expressed as readable characters
+        in hexadecimal notation."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPhysEntry 3 }
+
+vdslPhysInvVersionNumber OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..16))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The vendor specific version number sent by this Vtu
+        as part of the initialization messages.  It is a copy
+        of the binary version number field expressed as
+        readable characters in hexadecimal notation."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPhysEntry 4 }
+
+vdslPhysCurrSnrMgn OBJECT-TYPE
+    SYNTAX       Integer32 (-127..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Noise Margin as seen by this Vtu with respect to its
+        received signal in 0.25dB.  The effective range is
+        -31.75 to +31.75 dB."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+     ::= { vdslPhysEntry 5 }
+
+vdslPhysCurrAtn OBJECT-TYPE
+    SYNTAX       Gauge32 (0..255)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Measured difference in the total power transmitted by
+        the peer Vtu and the total power received by this Vtu.
+        The effective range is 0 to +63.75 dB."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+     ::= { vdslPhysEntry 6 }
+
+vdslPhysCurrStatus OBJECT-TYPE
+    SYNTAX       BITS
+        {
+        noDefect(0),
+        lossOfFraming(1),
+        lossOfSignal(2),
+        lossOfPower(3),
+        lossOfSignalQuality(4),
+        lossOfLink(5),
+        dataInitFailure(6),
+        configInitFailure(7),
+        protocolInitFailure(8),
+        noPeerVtuPresent(9)
+        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates current state of the Vtu line.  This is a
+        bit-map of possible conditions.  The various bit
+        positions are:
+
+        0   noDefect             There are no defects on the line.
+
+        1   lossOfFraming        Vtu failure due to not receiving
+                                 a valid frame.
+
+        2   lossOfSignal         Vtu failure due to not receiving
+                                 signal.
+
+        3   lossOfPower          Vtu failure due to loss of power.
+
+        4   lossOfSignalQuality  Loss of Signal Quality is declared
+                                 when the Noise Margin falls below
+                                 the Minimum Noise Margin, or the
+                                 bit-error-rate exceeds 10^-7.
+
+        5   lossOfLink           Vtu failure due to inability to
+                                 link with peer Vtu.  Set whenever
+                                 the transceiver is in the 'Warm
+                                 Start' state.
+
+        6   dataInitFailure      Vtu failure during initialization
+                                 due to bit errors corrupting
+                                 startup exchange data.
+
+        7   configInitFailure    Vtu failure during initialization
+                                 due to peer Vtu not able to
+                                 support requested configuration.
+
+        8   protocolInitFailure  Vtu failure during initialization
+                                 due to incompatible protocol used
+                                 by the peer Vtu.
+
+        9   noPeerVtuPresent     Vtu failure during initialization
+                                 due to no activation sequence
+                                 detected from peer Vtu.
+
+        This is intended to supplement ifOperStatus."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+     ::= { vdslPhysEntry 7 }
+
+vdslPhysCurrOutputPwr OBJECT-TYPE
+    SYNTAX       Integer32 (0..160)
+    UNITS        "0.1dBm"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Measured total output power transmitted by this VTU.
+        This is the measurement that was reported during
+        the last activation sequence."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPhysEntry 8 }
+
+vdslPhysCurrAttainableRate OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "kbps"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Indicates the maximum currently attainable data rate
+        in steps of 1000 bits/second by the Vtu.  This value
+        will be equal to or greater than vdslPhysCurrLineRate.
+        Note that for SCM, the minimum and maximum data rates
+        are equal.  Note: 1 kbps = 1000 bps."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPhysEntry 9 }
+
+vdslPhysCurrLineRate OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "kbps"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Indicates the current data rate in steps of 1000
+        bits/second by the Vtu.  This value will be less than
+        or equal to vdslPhysCurrAttainableRate.  Note: 1 kbps =
+        1000 bps."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPhysEntry 10 }
+
+vdslChanTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslChanEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each Vtu channel.
+        VDSL channel interfaces are those ifEntries where
+        ifType is equal to interleave(124) or fast(125)."
+    ::= { vdslMibObjects 3 }
+
+vdslChanEntry OBJECT-TYPE
+    SYNTAX       VdslChanEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "An entry in the vdslChanTable."
+    INDEX { ifIndex,
+            vdslPhysSide }
+    ::= { vdslChanTable 1 }
+
+VdslChanEntry ::=
+    SEQUENCE
+        {
+        vdslChanInterleaveDelay        Gauge32,
+        vdslChanCrcBlockLength         Gauge32,
+        vdslChanCurrTxRate             Gauge32,
+        vdslChanCurrTxSlowBurstProtect Gauge32,
+        vdslChanCurrTxFastFec          Gauge32
+        }
+
+vdslChanInterleaveDelay OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "milliseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Interleave Delay for this channel.
+
+        Interleave delay applies only to the interleave
+        (slow) channel and defines the mapping (relative
+        spacing) between subsequent input bytes at the
+
+        interleaver input and their placement in the bit
+        stream at the interleaver output.  Larger numbers
+        provide greater separation between consecutive
+        input bytes in the output bit stream allowing for
+        improved impulse noise immunity at the expense of
+        payload latency.
+
+        In the case where the ifType is fast(125), return
+        a value of zero."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanEntry 1 }
+
+vdslChanCrcBlockLength OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "bytes"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Indicates the length of the channel data-block
+        on which the CRC operates."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanEntry 2 }
+
+vdslChanCurrTxRate OBJECT-TYPE
+    SYNTAX       Gauge32
+    UNITS        "kbps"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Actual transmit data rate on this channel.  Note: 1
+        kbps = 1000 bps."
+    ::= { vdslChanEntry 3 }
+
+vdslChanCurrTxSlowBurstProtect OBJECT-TYPE
+    SYNTAX       Gauge32 (0..1275)
+    UNITS        "microseconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Actual level of impulse noise (burst) protection
+        for an interleaved (slow) channel.  This parameter is
+        not applicable to fast channels.  For fast channels,
+        a value of zero shall be returned."
+    REFERENCE    "ITU-T G.997.1, section 7.3.2.3"
+    ::= { vdslChanEntry 4 }
+
+vdslChanCurrTxFastFec OBJECT-TYPE
+    SYNTAX       Gauge32 (0..50)
+    UNITS        "%"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Actual Forward Error Correction (FEC) redundancy
+        related overhead for a fast channel.  This parameter
+        is not applicable to an interleaved (slow) channel.
+        For interleaved channels, a value of zero shall be
+        returned."
+    ::= { vdslChanEntry 5 }
+
+vdslPerfDataTable       OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslPerfDataEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each VDSL physical
+        interface.  VDSL physical interfaces are those ifEntries
+        where ifType is equal to vdsl(97)."
+    ::= { vdslMibObjects 4 }
+
+vdslPerfDataEntry       OBJECT-TYPE
+    SYNTAX        VdslPerfDataEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry in the vdslPerfDataTable."
+    INDEX { ifIndex,
+            vdslPhysSide }
+    ::= { vdslPerfDataTable 1 }
+
+VdslPerfDataEntry ::=
+    SEQUENCE
+        {
+        vdslPerfDataValidIntervals         HCPerfValidIntervals,
+        vdslPerfDataInvalidIntervals       HCPerfInvalidIntervals,
+        vdslPerfDataLofs                   Unsigned32,
+        vdslPerfDataLoss                   Unsigned32,
+        vdslPerfDataLprs                   Unsigned32,
+        vdslPerfDataLols                   Unsigned32,
+        vdslPerfDataESs                    Unsigned32,
+        vdslPerfDataSESs                   Unsigned32,
+        vdslPerfDataUASs                   Unsigned32,
+        vdslPerfDataInits                  Unsigned32,
+        vdslPerfDataCurr15MinTimeElapsed   HCPerfTimeElapsed,
+        vdslPerfDataCurr15MinLofs          HCPerfCurrentCount,
+        vdslPerfDataCurr15MinLoss          HCPerfCurrentCount,
+        vdslPerfDataCurr15MinLprs          HCPerfCurrentCount,
+        vdslPerfDataCurr15MinLols          HCPerfCurrentCount,
+        vdslPerfDataCurr15MinESs           HCPerfCurrentCount,
+        vdslPerfDataCurr15MinSESs          HCPerfCurrentCount,
+        vdslPerfDataCurr15MinUASs          HCPerfCurrentCount,
+        vdslPerfDataCurr15MinInits         HCPerfCurrentCount,
+        vdslPerfData1DayValidIntervals     HCPerfValidIntervals,
+        vdslPerfData1DayInvalidIntervals   HCPerfInvalidIntervals,
+        vdslPerfDataCurr1DayTimeElapsed    HCPerfTimeElapsed,
+        vdslPerfDataCurr1DayLofs           Unsigned32,
+        vdslPerfDataCurr1DayLoss           Unsigned32,
+        vdslPerfDataCurr1DayLprs           Unsigned32,
+        vdslPerfDataCurr1DayLols           Unsigned32,
+        vdslPerfDataCurr1DayESs            Unsigned32,
+        vdslPerfDataCurr1DaySESs           Unsigned32,
+        vdslPerfDataCurr1DayUASs           Unsigned32,
+        vdslPerfDataCurr1DayInits          Unsigned32
+        }
+
+vdslPerfDataValidIntervals OBJECT-TYPE
+    SYNTAX       HCPerfValidIntervals
+    UNITS        "intervals"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Valid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslPerfDataEntry 1 }
+
+vdslPerfDataInvalidIntervals OBJECT-TYPE
+    SYNTAX       HCPerfInvalidIntervals
+    UNITS        "intervals"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Invalid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslPerfDataEntry 2 }
+
+vdslPerfDataLofs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds since the unit was last reset that there
+        was Loss of Framing."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 3 }
+
+vdslPerfDataLoss OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds since the unit was last reset that there
+        was Loss of Signal."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 4 }
+
+vdslPerfDataLprs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds since the unit was last reset that there
+        was Loss of Power."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 5 }
+
+vdslPerfDataLols OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds since the unit was last reset that there
+        was Loss of Link."
+    ::= { vdslPerfDataEntry 6 }
+
+vdslPerfDataESs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Errored Seconds since the unit was last reset.
+        An Errored Second is a one-second interval containing one
+        or more CRC anomalies, or one or more LOS or LOF defects."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 7 }
+
+vdslPerfDataSESs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Severely Errored Seconds since the unit was last
+        reset."
+    ::= { vdslPerfDataEntry 8 }
+
+vdslPerfDataUASs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Unavailable Seconds since the unit was last
+        reset."
+    ::= { vdslPerfDataEntry 9 }
+
+vdslPerfDataInits OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "occurrences"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of the line initialization attempts since the unit
+        was last reset.  This count includes both successful and
+        failed attempts."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 10 }
+
+vdslPerfDataCurr15MinTimeElapsed OBJECT-TYPE
+    SYNTAX       HCPerfTimeElapsed
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Total elapsed seconds in this interval."
+    ::= { vdslPerfDataEntry 11 }
+
+vdslPerfDataCurr15MinLofs OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds during this interval that there
+        was Loss of Framing."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 12 }
+
+vdslPerfDataCurr15MinLoss OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds during this interval that there
+        was Loss of Signal."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 13 }
+
+vdslPerfDataCurr15MinLprs OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds during this interval that there
+        was Loss of Power."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 14 }
+
+vdslPerfDataCurr15MinLols OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds during this interval that there
+        was Loss of Link."
+    ::= { vdslPerfDataEntry 15 }
+
+vdslPerfDataCurr15MinESs OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Errored Seconds during this interval.  An Errored
+        Second is a one-second interval containing one or more CRC
+        anomalies, or one or more LOS or LOF defects."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 16 }
+
+vdslPerfDataCurr15MinSESs OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Severely Errored Seconds during this interval."
+    ::= { vdslPerfDataEntry 17 }
+
+vdslPerfDataCurr15MinUASs OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Unavailable Seconds during this interval."
+    ::= { vdslPerfDataEntry 18 }
+
+vdslPerfDataCurr15MinInits OBJECT-TYPE
+    SYNTAX       HCPerfCurrentCount
+    UNITS        "occurrences"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of the line initialization attempts during this
+        interval.  This count includes both successful and
+        failed attempts."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfDataEntry 19 }
+
+vdslPerfData1DayValidIntervals OBJECT-TYPE
+    SYNTAX       HCPerfValidIntervals
+    UNITS        "intervals"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Valid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslPerfDataEntry 20 }
+
+vdslPerfData1DayInvalidIntervals OBJECT-TYPE
+    SYNTAX       HCPerfInvalidIntervals
+    UNITS        "intervals"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Invalid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslPerfDataEntry 21 }
+
+vdslPerfDataCurr1DayTimeElapsed OBJECT-TYPE
+    SYNTAX       HCPerfTimeElapsed
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Number of seconds that have elapsed since the beginning
+         of the current 1-day interval."
+    ::= { vdslPerfDataEntry 22 }
+
+vdslPerfDataCurr1DayLofs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Loss of Framing (LOF) Seconds since the
+        beginning of the current 1-day interval."
+    ::= { vdslPerfDataEntry 23 }
+
+vdslPerfDataCurr1DayLoss OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Loss of Signal (LOS) Seconds since the beginning
+        of the current 1-day interval."
+    ::= { vdslPerfDataEntry 24 }
+
+vdslPerfDataCurr1DayLprs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Loss of Power (LPR) Seconds since the beginning
+        of the current 1-day interval."
+    ::= { vdslPerfDataEntry 25 }
+
+vdslPerfDataCurr1DayLols OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Loss of Link (LOL) Seconds since the beginning
+        of the current 1-day interval."
+    ::= { vdslPerfDataEntry 26 }
+
+vdslPerfDataCurr1DayESs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Errored Seconds (ES) since the beginning
+        of the current 1-day interval."
+    ::= { vdslPerfDataEntry 27 }
+
+vdslPerfDataCurr1DaySESs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Severely Errored Seconds (SES) since the
+        beginning of the current 1-day interval."
+    ::= { vdslPerfDataEntry 28 }
+
+vdslPerfDataCurr1DayUASs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Unavailable Seconds (UAS) since the beginning
+        of the current 1-day interval."
+    ::= { vdslPerfDataEntry 29 }
+
+vdslPerfDataCurr1DayInits OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of the line initialization attempts since the
+        beginning of the current 1-day interval.  This count
+        includes both successful and failed attempts."
+    ::= { vdslPerfDataEntry 30 }
+
+vdslPerfIntervalTable       OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslPerfIntervalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each Vtu performance
+        data collection interval.  VDSL physical interfaces are
+
+        those ifEntries where ifType is equal to vdsl(97)."
+    ::= { vdslMibObjects 5 }
+
+vdslPerfIntervalEntry       OBJECT-TYPE
+    SYNTAX        VdslPerfIntervalEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry in the vdslPerfIntervalTable."
+    INDEX { ifIndex,
+            vdslPhysSide,
+            vdslPerfIntervalNumber }
+    ::= { vdslPerfIntervalTable 1 }
+
+VdslPerfIntervalEntry ::=
+    SEQUENCE
+        {
+        vdslPerfIntervalNumber             Unsigned32,
+        vdslPerfIntervalLofs               HCPerfIntervalCount,
+        vdslPerfIntervalLoss               HCPerfIntervalCount,
+        vdslPerfIntervalLprs               HCPerfIntervalCount,
+        vdslPerfIntervalLols               HCPerfIntervalCount,
+        vdslPerfIntervalESs                HCPerfIntervalCount,
+        vdslPerfIntervalSESs               HCPerfIntervalCount,
+        vdslPerfIntervalUASs               HCPerfIntervalCount,
+        vdslPerfIntervalInits              HCPerfIntervalCount
+        }
+
+vdslPerfIntervalNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..96)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Performance Data Interval number 1 is the most recent
+        previous interval; interval 96 is 24 hours ago.
+        Intervals 2 to 96 are optional."
+    ::= { vdslPerfIntervalEntry 1 }
+
+vdslPerfIntervalLofs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds in the interval when there was Loss
+        of Framing."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfIntervalEntry 2 }
+
+vdslPerfIntervalLoss OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds in the interval when there was Loss
+        of Signal."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfIntervalEntry 3 }
+
+vdslPerfIntervalLprs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds in the interval when there was Loss
+        of Power."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfIntervalEntry 4 }
+
+vdslPerfIntervalLols OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of seconds in the interval when there was Loss
+        of Link."
+    ::= { vdslPerfIntervalEntry 5 }
+
+vdslPerfIntervalESs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Errored Seconds (ES) in the interval.  An Errored
+        Second is a one-second interval containing one or more CRC
+        anomalies, one or more LOS or LOF defects."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfIntervalEntry 6 }
+
+vdslPerfIntervalSESs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Severely Errored Seconds in the interval."
+    ::= { vdslPerfIntervalEntry 7 }
+
+vdslPerfIntervalUASs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of Unavailable Seconds in the interval."
+    ::= { vdslPerfIntervalEntry 8 }
+
+vdslPerfIntervalInits OBJECT-TYPE
+    SYNTAX       HCPerfIntervalCount
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of the line initialization attempts during this
+        interval.  This count includes both successful and
+        failed attempts."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerfIntervalEntry 9 }
+
+vdslPerf1DayIntervalTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslPerf1DayIntervalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each VDSL performance
+        data collection interval.  This table contains live data
+        from equipment.  As such, it is NOT persistent."
+    ::= { vdslMibObjects 6 }
+
+vdslPerf1DayIntervalEntry OBJECT-TYPE
+    SYNTAX       VdslPerf1DayIntervalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "An entry in the vdslPerf1DayIntervalTable."
+    INDEX { ifIndex,
+            vdslPhysSide,
+            vdslPerf1DayIntervalNumber }
+    ::= { vdslPerf1DayIntervalTable 1 }
+
+VdslPerf1DayIntervalEntry ::=
+    SEQUENCE
+
+    {
+    vdslPerf1DayIntervalNumber             Unsigned32,
+    vdslPerf1DayIntervalMoniSecs           HCPerfTimeElapsed,
+    vdslPerf1DayIntervalLofs               Unsigned32,
+    vdslPerf1DayIntervalLoss               Unsigned32,
+    vdslPerf1DayIntervalLprs               Unsigned32,
+    vdslPerf1DayIntervalLols               Unsigned32,
+    vdslPerf1DayIntervalESs                Unsigned32,
+    vdslPerf1DayIntervalSESs               Unsigned32,
+    vdslPerf1DayIntervalUASs               Unsigned32,
+    vdslPerf1DayIntervalInits              Unsigned32
+    }
+
+vdslPerf1DayIntervalNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..30)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "History Data Interval number.  Interval 1 is the most
+        recent previous day; interval 30 is 30 days ago.  Intervals
+        2 to 30 are optional."
+    ::= { vdslPerf1DayIntervalEntry 1 }
+
+vdslPerf1DayIntervalMoniSecs OBJECT-TYPE
+    SYNTAX       HCPerfTimeElapsed
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The amount of time in the 1-day interval over which the
+        performance monitoring information is actually counted.
+        This value will be the same as the interval duration except
+        in a situation where performance monitoring data could not
+        be collected for any reason."
+    ::= { vdslPerf1DayIntervalEntry 2 }
+
+vdslPerf1DayIntervalLofs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Loss of Frame (LOF) Seconds during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerf1DayIntervalEntry 3 }
+
+vdslPerf1DayIntervalLoss OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Loss of Signal (LOS) Seconds during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerf1DayIntervalEntry 4 }
+
+vdslPerf1DayIntervalLprs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Loss of Power (LPR) Seconds during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerf1DayIntervalEntry 5 }
+
+vdslPerf1DayIntervalLols OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Loss of Link (LOL) Seconds during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    ::= { vdslPerf1DayIntervalEntry 6 }
+
+vdslPerf1DayIntervalESs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Errored Seconds (ES) during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerf1DayIntervalEntry 7 }
+
+vdslPerf1DayIntervalSESs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Severely Errored Seconds (SES) during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    ::= { vdslPerf1DayIntervalEntry 8 }
+
+vdslPerf1DayIntervalUASs OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Count of Unavailable Seconds (UAS) during the 1-day
+         interval as measured by vdslPerf1DayIntervalMoniSecs."
+    ::= { vdslPerf1DayIntervalEntry 9 }
+
+vdslPerf1DayIntervalInits OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Count of the line initialization attempts during the
+        1-day interval as measured by vdslPerf1DayIntervalMoniSecs.
+        This count includes both successful and failed attempts."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslPerf1DayIntervalEntry 10 }
+
+vdslChanPerfDataTable       OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslChanPerfDataEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each Vtu channel.
+        VDSL channel interfaces are those ifEntries where
+        ifType is equal to interleave(124) or fast(125)."
+    ::= { vdslMibObjects 7 }
+
+vdslChanPerfDataEntry OBJECT-TYPE
+    SYNTAX        VdslChanPerfDataEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry in the vdslChanPerfDataTable."
+    INDEX { ifIndex,
+            vdslPhysSide }
+    ::= { vdslChanPerfDataTable 1 }
+
+VdslChanPerfDataEntry ::=
+    SEQUENCE
+
+        {
+        vdslChanValidIntervals         HCPerfValidIntervals,
+        vdslChanInvalidIntervals       HCPerfInvalidIntervals,
+        vdslChanFixedOctets            ZeroBasedCounter64,
+        vdslChanBadBlks                ZeroBasedCounter64,
+        vdslChanCurr15MinTimeElapsed   HCPerfTimeElapsed,
+        vdslChanCurr15MinFixedOctets   HCPerfCurrentCount,
+        vdslChanCurr15MinBadBlks       HCPerfCurrentCount,
+        vdslChan1DayValidIntervals     HCPerfValidIntervals,
+        vdslChan1DayInvalidIntervals   HCPerfInvalidIntervals,
+        vdslChanCurr1DayTimeElapsed    HCPerfTimeElapsed,
+        vdslChanCurr1DayFixedOctets    HCPerfCurrentCount,
+        vdslChanCurr1DayBadBlks        HCPerfCurrentCount
+        }
+
+vdslChanValidIntervals OBJECT-TYPE
+    SYNTAX        HCPerfValidIntervals
+    UNITS        "intervals"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Valid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslChanPerfDataEntry 1 }
+
+vdslChanInvalidIntervals OBJECT-TYPE
+    SYNTAX        HCPerfInvalidIntervals
+    UNITS        "intervals"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Invalid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslChanPerfDataEntry 2 }
+
+vdslChanFixedOctets OBJECT-TYPE
+    SYNTAX        ZeroBasedCounter64
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of corrected octets since the unit was last reset."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanPerfDataEntry 3 }
+
+vdslChanBadBlks OBJECT-TYPE
+    SYNTAX        ZeroBasedCounter64
+    UNITS         "blocks"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of uncorrectable blocks since the unit was last
+        reset."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanPerfDataEntry 4 }
+
+vdslChanCurr15MinTimeElapsed OBJECT-TYPE
+    SYNTAX        HCPerfTimeElapsed
+    UNITS         "seconds"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Total elapsed seconds in this interval."
+    ::= { vdslChanPerfDataEntry 5 }
+
+vdslChanCurr15MinFixedOctets OBJECT-TYPE
+    SYNTAX        HCPerfCurrentCount
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of corrected octets in this interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanPerfDataEntry 6 }
+
+vdslChanCurr15MinBadBlks OBJECT-TYPE
+    SYNTAX        HCPerfCurrentCount
+    UNITS         "blocks"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of uncorrectable blocks in this interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanPerfDataEntry 7 }
+
+vdslChan1DayValidIntervals OBJECT-TYPE
+    SYNTAX        HCPerfValidIntervals
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Valid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslChanPerfDataEntry 8 }
+
+vdslChan1DayInvalidIntervals OBJECT-TYPE
+    SYNTAX        HCPerfInvalidIntervals
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Invalid Intervals per definition found in
+        HC-PerfHist-TC-MIB."
+    ::= { vdslChanPerfDataEntry 9 }
+
+vdslChanCurr1DayTimeElapsed OBJECT-TYPE
+    SYNTAX       HCPerfTimeElapsed
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+         "Number of seconds that have elapsed since the beginning
+         of the current 1-day interval."
+    ::= { vdslChanPerfDataEntry 10 }
+
+vdslChanCurr1DayFixedOctets OBJECT-TYPE
+    SYNTAX        HCPerfCurrentCount
+    UNITS         "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of corrected octets since the beginning of the
+        current 1-day interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanPerfDataEntry 11 }
+
+vdslChanCurr1DayBadBlks OBJECT-TYPE
+    SYNTAX        HCPerfCurrentCount
+    UNITS         "blocks"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of uncorrectable blocks since the beginning of the
+        current 1-day interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanPerfDataEntry 12 }
+
+vdslChanIntervalTable       OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslChanIntervalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each Vtu channel data
+        collection interval.  VDSL channel interfaces are those
+        ifEntries where ifType is equal to interleave(124) or
+        fast(125)."
+    ::= { vdslMibObjects 8 }
+
+vdslChanIntervalEntry OBJECT-TYPE
+    SYNTAX        VdslChanIntervalEntry
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "An entry in the vdslChanIntervalTable."
+    INDEX { ifIndex,
+            vdslPhysSide,
+            vdslChanIntervalNumber }
+    ::= { vdslChanIntervalTable 1 }
+
+VdslChanIntervalEntry ::=
+    SEQUENCE
+        {
+        vdslChanIntervalNumber         Unsigned32,
+        vdslChanIntervalFixedOctets    HCPerfIntervalCount,
+        vdslChanIntervalBadBlks        HCPerfIntervalCount
+        }
+
+vdslChanIntervalNumber OBJECT-TYPE
+    SYNTAX        Unsigned32 (1..96)
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "Performance Data Interval number 1 is the most recent
+        previous interval; interval 96 is 24 hours ago.
+        Intervals 2 to 96 are optional."
+    ::= { vdslChanIntervalEntry 1 }
+
+vdslChanIntervalFixedOctets OBJECT-TYPE
+    SYNTAX        HCPerfIntervalCount
+    UNITS        "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of corrected octets in this interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanIntervalEntry 2 }
+
+vdslChanIntervalBadBlks OBJECT-TYPE
+    SYNTAX        HCPerfIntervalCount
+    UNITS        "blocks"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of uncorrectable blocks in this interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChanIntervalEntry 3 }
+
+vdslChan1DayIntervalTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslChan1DayIntervalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table provides one row for each VDSL performance
+        data collection interval.  This table contains live data
+        from equipment.  As such, it is NOT persistent."
+    ::= { vdslMibObjects 9 }
+
+vdslChan1DayIntervalEntry OBJECT-TYPE
+    SYNTAX       VdslChan1DayIntervalEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "An entry in the vdslChan1DayIntervalTable."
+    INDEX { ifIndex,
+            vdslPhysSide,
+            vdslChan1DayIntervalNumber }
+    ::= { vdslChan1DayIntervalTable 1 }
+
+VdslChan1DayIntervalEntry ::=
+    SEQUENCE
+    {
+    vdslChan1DayIntervalNumber         Unsigned32,
+    vdslChan1DayIntervalMoniSecs       HCPerfTimeElapsed,
+    vdslChan1DayIntervalFixedOctets    HCPerfCurrentCount,
+    vdslChan1DayIntervalBadBlks        HCPerfCurrentCount
+    }
+
+vdslChan1DayIntervalNumber OBJECT-TYPE
+    SYNTAX       Unsigned32 (1..30)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "History Data Interval number.  Interval 1 is the most
+        recent previous day; interval 30 is 30 days ago.  Intervals
+        2 to 30 are optional."
+    ::= { vdslChan1DayIntervalEntry 1 }
+
+vdslChan1DayIntervalMoniSecs OBJECT-TYPE
+    SYNTAX       HCPerfTimeElapsed
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "The amount of time in the 1-day interval over which the
+        performance monitoring information is actually counted.
+        This value will be the same as the interval duration except
+        in a situation where performance monitoring data could not
+        be collected for any reason."
+    ::= { vdslChan1DayIntervalEntry 2 }
+
+vdslChan1DayIntervalFixedOctets OBJECT-TYPE
+    SYNTAX        HCPerfCurrentCount
+    UNITS        "octets"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of corrected octets in this interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChan1DayIntervalEntry 3 }
+
+vdslChan1DayIntervalBadBlks OBJECT-TYPE
+    SYNTAX        HCPerfCurrentCount
+    UNITS        "blocks"
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "Count of uncorrectable blocks in this interval."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    ::= { vdslChan1DayIntervalEntry 4 }
+
+--
+-- profile tables
+--
+
+vdslLineConfProfileTable OBJECT-TYPE
+    SYNTAX         SEQUENCE OF VdslLineConfProfileEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION
+        "This table contains information on the VDSL line
+        configuration.  One entry in this table reflects a
+        profile defined by a manager which can be used to
+        configure the VDSL line.
+
+        Entries in this table MUST be maintained in a
+        persistent manner."
+    ::= { vdslMibObjects 11 }
+
+vdslLineConfProfileEntry OBJECT-TYPE
+    SYNTAX         VdslLineConfProfileEntry
+    MAX-ACCESS     not-accessible
+    STATUS         current
+    DESCRIPTION
+        "Each entry consists of a list of parameters that
+        represents the configuration of a VDSL line.
+
+        A default profile with an index of 'DEFVAL', will
+        always exist and its parameters will be set to vendor
+        specific values, unless otherwise specified in this
+        document."
+    INDEX { vdslLineConfProfileName }
+    ::= { vdslLineConfProfileTable 1 }
+
+VdslLineConfProfileEntry ::=
+    SEQUENCE
+        {
+        vdslLineConfProfileName            SnmpAdminString,
+        vdslLineConfDownRateMode           INTEGER,
+        vdslLineConfUpRateMode             INTEGER,
+        vdslLineConfDownMaxPwr             Unsigned32,
+        vdslLineConfUpMaxPwr               Unsigned32,
+        vdslLineConfDownMaxSnrMgn          Unsigned32,
+        vdslLineConfDownMinSnrMgn          Unsigned32,
+        vdslLineConfDownTargetSnrMgn       Unsigned32,
+        vdslLineConfUpMaxSnrMgn            Unsigned32,
+        vdslLineConfUpMinSnrMgn            Unsigned32,
+        vdslLineConfUpTargetSnrMgn         Unsigned32,
+        vdslLineConfDownFastMaxDataRate    Unsigned32,
+        vdslLineConfDownFastMinDataRate    Unsigned32,
+        vdslLineConfDownSlowMaxDataRate    Unsigned32,
+        vdslLineConfDownSlowMinDataRate    Unsigned32,
+        vdslLineConfUpFastMaxDataRate      Unsigned32,
+        vdslLineConfUpFastMinDataRate      Unsigned32,
+        vdslLineConfUpSlowMaxDataRate      Unsigned32,
+        vdslLineConfUpSlowMinDataRate      Unsigned32,
+        vdslLineConfDownRateRatio          Unsigned32,
+        vdslLineConfUpRateRatio            Unsigned32,
+        vdslLineConfDownMaxInterDelay      Unsigned32,
+        vdslLineConfUpMaxInterDelay        Unsigned32,
+        vdslLineConfDownPboControl         INTEGER,
+        vdslLineConfUpPboControl           INTEGER,
+        vdslLineConfDownPboLevel           Unsigned32,
+        vdslLineConfUpPboLevel             Unsigned32,
+        vdslLineConfDeploymentScenario     INTEGER,
+        vdslLineConfAdslPresence           INTEGER,
+        vdslLineConfApplicableStandard     INTEGER,
+        vdslLineConfBandPlan               INTEGER,
+        vdslLineConfBandPlanFx             Unsigned32,
+        vdslLineConfBandOptUsage           INTEGER,
+        vdslLineConfUpPsdTemplate          INTEGER,
+        vdslLineConfDownPsdTemplate        INTEGER,
+        vdslLineConfHamBandMask            BITS,
+        vdslLineConfCustomNotch1Start      Unsigned32,
+        vdslLineConfCustomNotch1Stop       Unsigned32,
+        vdslLineConfCustomNotch2Start      Unsigned32,
+        vdslLineConfCustomNotch2Stop       Unsigned32,
+        vdslLineConfDownTargetSlowBurst    Unsigned32,
+        vdslLineConfUpTargetSlowBurst      Unsigned32,
+        vdslLineConfDownMaxFastFec         Unsigned32,
+        vdslLineConfUpMaxFastFec           Unsigned32,
+        vdslLineConfLineType               INTEGER,
+        vdslLineConfProfRowStatus          RowStatus
+        }
+
+vdslLineConfProfileName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This object identifies a row in this table.
+
+        A default profile with an index of 'DEFVAL', will
+        always exist and its parameters will be set to vendor
+        specific values, unless otherwise specified in this
+        document."
+    ::= { vdslLineConfProfileEntry 1 }
+
+vdslLineConfDownRateMode OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 manual(1),
+                 adaptAtInit(2)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the rate selection behavior for the line
+        in the downstream direction.
+
+        manual(1)       forces the rate to the configured rate
+        adaptAtInit(2)  adapts the line based upon line quality."
+    DEFVAL       { adaptAtInit }
+    ::= { vdslLineConfProfileEntry 2 }
+
+vdslLineConfUpRateMode OBJECT-TYPE
+    SYNTAX       INTEGER
+
+                 {
+                 manual(1),
+                 adaptAtInit(2)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the rate selection behavior for the line
+        in the upstream direction.
+
+        manual(1)       forces the rate to the configured rate
+        adaptAtInit(2)  adapts the line based upon line quality."
+    DEFVAL       { adaptAtInit }
+    ::= { vdslLineConfProfileEntry 3 }
+
+vdslLineConfDownMaxPwr OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..58)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum aggregate downstream power
+        level in the range 0 to 14.5 dBm."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 4 }
+
+vdslLineConfUpMaxPwr OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..58)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum aggregate upstream power
+        level in the range 0 to 14.5 dBm."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 5 }
+
+vdslLineConfDownMaxSnrMgn OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum downstream Signal/Noise Margin
+        in units of 0.25 dB, for a range of 0 to 31.75 dB."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 6 }
+
+vdslLineConfDownMinSnrMgn OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the minimum downstream Signal/Noise Margin
+        in units of 0.25 dB, for a range of 0 to 31.75 dB."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 7 }
+
+vdslLineConfDownTargetSnrMgn OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the target downstream Signal/Noise Margin
+        in units of 0.25 dB, for a range of 0 to 31.75 dB.
+        This is the Noise Margin the transceivers must achieve
+        with a BER of 10^-7 or better to successfully complete
+        initialization."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 8 }
+
+vdslLineConfUpMaxSnrMgn OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum upstream Signal/Noise Margin
+        in units of 0.25 dB, for a range of 0 to 31.75 dB."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 9 }
+
+vdslLineConfUpMinSnrMgn OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the minimum upstream Signal/Noise Margin
+        in units of 0.25 dB, for a range of 0 to 31.75 dB."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 10 }
+
+vdslLineConfUpTargetSnrMgn OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..127)
+    UNITS        "0.25dBm"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the target upstream Signal/Noise Margin in
+        units of 0.25 dB, for a range of 0 to 31.75 dB.  This
+        is the Noise Margin the transceivers must achieve with
+        a BER of 10^-7 or better to successfully complete
+        initialization."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 11 }
+
+vdslLineConfDownFastMaxDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum downstream fast channel
+        data rate in steps of 1000 bits/second."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 12 }
+
+vdslLineConfDownFastMinDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the minimum downstream fast channel
+        data rate in steps of 1000 bits/second."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 13 }
+
+vdslLineConfDownSlowMaxDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum downstream slow channel
+        data rate in steps of 1000 bits/second.
+
+        The maximum aggregate downstream transmit speed
+        of the line can be derived from the sum of maximum
+        downstream fast and slow channel data rates."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 14 }
+
+vdslLineConfDownSlowMinDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the minimum downstream slow channel
+        data rate in steps of 1000 bits/second.
+
+        The minimum aggregate downstream transmit speed
+        of the line can be derived from the sum of minimum
+        downstream fast and slow channel data rates."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 15 }
+
+vdslLineConfUpFastMaxDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum upstream fast channel
+        data rate in steps of 1000 bits/second.
+
+        The maximum aggregate upstream transmit speed
+        of the line can be derived from the sum of maximum
+        upstream fast and slow channel data rates."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 16 }
+
+vdslLineConfUpFastMinDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the minimum upstream fast channel
+        data rate in steps of 1000 bits/second.
+
+        The minimum aggregate upstream transmit speed
+        of the line can be derived from the sum of minimum
+        upstream fast and slow channel data rates."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 17 }
+
+vdslLineConfUpSlowMaxDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum upstream slow channel
+        data rate in steps of 1000 bits/second."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 18 }
+
+vdslLineConfUpSlowMinDataRate OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kbps"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the minimum upstream slow channel
+        data rate in steps of 1000 bits/second."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 19 }
+
+vdslLineConfDownRateRatio OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..100)
+    UNITS        "percent"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "For dynamic rate adaptation at startup, the allocation
+        of data rate in excess of the minimum data rate for each
+        channel is controlled by the object.  This object specifies
+        the ratio of the allocation of the excess data rate between
+        the fast and the slow channels.  This allocation represents
+        downstream Fast Channel Allocation / Slow Channel
+        Allocation."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 20 }
+
+vdslLineConfUpRateRatio OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..100)
+    UNITS        "percent"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "For dynamic rate adaptation at startup, the allocation
+        of data rate in excess of the minimum data rate for each
+        channel is controlled by the object.  This object specifies
+        the ratio of the allocation of the excess data rate between
+        the fast and the slow channels.  This allocation represents
+        upstream Fast Channel Allocation/Slow Channel Allocation."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 21 }
+
+vdslLineConfDownMaxInterDelay OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..255)
+    UNITS        "milliseconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum interleave delay for the
+        downstream slow channel."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 22 }
+
+vdslLineConfUpMaxInterDelay OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..255)
+    UNITS        "milliseconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the maximum interleave delay for the
+        upstream slow channel."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 23 }
+
+vdslLineConfDownPboControl OBJECT-TYPE
+    SYNTAX       INTEGER
+                    {
+                 disabled(1),
+                 auto(2),
+                 manual(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Downstream power backoff (PBO) control for this
+        line.  For transceivers which do not support downstream
+        PBO control, this object MUST be fixed at disabled(1).
+        If auto(2) is selected, the transceiver will automatically
+        adjust the power backoff.  If manual(3) is selected,
+        then the transceiver will use the value from
+        vdslLineConfDownPboLevel."
+    DEFVAL       { disabled }
+    ::= { vdslLineConfProfileEntry 24 }
+
+vdslLineConfUpPboControl OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 disabled(1),
+                 auto(2),
+                 manual(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Upstream power backoff (PBO) control for this
+        line.  For transceivers which do not support upstream
+        PBO control, this object MUST be fixed at disabled(1).
+        If auto(2) is selected, the transceiver will automatically
+        adjust the power backoff.  If manual(3) is selected,
+        then the transceiver will use the value from
+        vdslLineConfUpPboLevel."
+    DEFVAL       { disabled }
+    ::= { vdslLineConfProfileEntry 25 }
+
+vdslLineConfDownPboLevel OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..160)
+    UNITS        "0.25dB"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the downstream backoff level to be used
+        when vdslLineConfDownPboControl = manual(3)."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 26 }
+
+vdslLineConfUpPboLevel OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..160)
+    UNITS        "0.25dB"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the upstream backoff level to be used
+        when vdslLineConfUpPboControl = manual(3)."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 27 }
+
+vdslLineConfDeploymentScenario OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 fttCab(1),
+                 fttEx(2),
+                 other(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The VDSL line deployment scenario.  When using
+        fttCab(1), the VTU-C is located in a street cabinet.
+        When using fttEx(2), the VTU-C is located at the
+        central office.  Changes to this value will have
+        no effect on the transceiver."
+    REFERENCE    "DSL Forum TR-057"
+    DEFVAL       { fttCab }
+    ::= { vdslLineConfProfileEntry 28 }
+
+vdslLineConfAdslPresence OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 none(1),
+                 adslOverPots(2),
+                 adslOverISDN(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Indicates presence of ADSL service in the associated
+        cable bundle/binder.
+
+        none(1)         indicates no ADSL service in the bundle
+        adslOverPots(2) indicates ADSL service over POTS is
+                        present in the bundle
+        adslOverISDN(3) indicates ADSL service over ISDN is
+                        present in the bundle"
+    DEFVAL       { none }
+    ::= { vdslLineConfProfileEntry 29 }
+
+vdslLineConfApplicableStandard OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 ansi(1),
+                 etsi(2),
+                 itu(3),
+                 other(4)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The VDSL standard to be used for the line.
+
+         ansi(1)      indicates ANSI standard
+         etsi(2)      indicates ETSI standard
+         itu(3)       indicates ITU standard
+         other(4)     indicates a standard other than the above."
+    DEFVAL       { ansi }
+    ::= { vdslLineConfProfileEntry 30 }
+
+vdslLineConfBandPlan OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 bandPlan997(1),
+                 bandPlan998(2),
+                 bandPlanFx(3),
+                 other(4)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The VDSL band plan to be used for the line.
+
+         bandPlan997(1) is to be used for
+              ITU-T G.993.1 Bandplan-B
+              ETSI Bandplan
+              ANSI Plan 997
+
+         bandPlan998(2) is to be used for
+              ITU-T G.993.1 Bandplan-A
+              ANSI Plan 998
+
+         bandPlanFx(3) is to be used for
+              ITU-T G.993.1 Bandplan-C.
+
+         other(4) is to be used for
+              non-standard bandplans.
+
+         If this object is set to bandPlanFx(3), then the
+         object vdslLineConfBandPlanFx MUST also be set."
+    DEFVAL       { bandPlan997 }
+    ::= { vdslLineConfProfileEntry 31 }
+
+vdslLineConfBandPlanFx OBJECT-TYPE
+    SYNTAX       Unsigned32 (3750..12000)
+    UNITS        "kHz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The frequency limit between bands D2 and U2 when
+        vdslLineConfBandPlan is set to bandPlanFx(3)."
+    DEFVAL       { 3750 }
+    ::= { vdslLineConfProfileEntry 32 }
+
+   vdslLineConfBandOptUsage OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 unused(1),
+                 upstream(2),
+                 downstream(3)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Defines the VDSL link use of the optional frequency
+        range [25kHz - 138kHz] (Opt).
+
+        unused(1)     indicates Opt is unused
+        upstream(2)   indicates Opt usage is for upstream
+        downstream(3) indicates Opt usage is for downstream."
+    REFERENCE    "ITU-T G.993.1, section 6.1"
+    DEFVAL       { unused }
+    ::= { vdslLineConfProfileEntry 33 }
+
+vdslLineConfUpPsdTemplate OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 templateMask1(1),
+                 templateMask2(2)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The upstream PSD template to be used for the line.
+        Here, templateMask1(1) refers to a notched mask that
+        limits the transmitted PSD within the internationally
+        standardized HAM (Handheld Amateur Radio) radio bands,
+        while templateMask2(2) refers to an unnotched mask.
+
+        The masks themselves depend upon the applicable
+        standard being used (vdslLineConfApplicableStandard)."
+    REFERENCE    "DSL TR-057"
+    DEFVAL       { templateMask1 }
+    ::= { vdslLineConfProfileEntry 34 }
+
+vdslLineConfDownPsdTemplate OBJECT-TYPE
+    SYNTAX       INTEGER
+                 {
+                 templateMask1(1),
+                 templateMask2(2)
+                 }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The downstream PSD template to be used for the line.
+        Here, templateMask1(1) refers to a notched mask that
+        limits the transmitted PSD within the internationally
+        standardized HAM (Handheld Amateur Radio) radio bands,
+        while templateMask2(2) refers to an unnotched mask.
+
+        The masks themselves depend upon the applicable
+        standard being used (vdslLineConfApplicableStandard)."
+    REFERENCE    "DSL TR-057"
+    DEFVAL       { templateMask1 }
+    ::= { vdslLineConfProfileEntry 35 }
+
+vdslLineConfHamBandMask OBJECT-TYPE
+    SYNTAX       BITS
+        {
+        customNotch1(0),     -- custom (region-specific) notch
+        customNotch2(1),     -- custom (region-specific) notch
+        amateurBand30m(2),   -- amateur radio band notch
+        amateurBand40m(3),   -- amateur radio band notch
+        amateurBand80m(4),   -- amateur radio band notch
+        amateurBand160m(5)   -- amateur radio band notch
+        }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The transmit power spectral density mask code, used
+        to avoid interference with HAM (Handheld Amateur Radio)
+        radio bands by introducing power control (notching) in one
+        or more of these bands.
+
+        Amateur radio band notching is defined in the VDSL
+        spectrum as follows:
+
+        Band  Start Frequency     Stop Frequency
+        ----  ------------------  --------------------------------
+        30m   1810 kHz            2000 kHz
+        40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
+        80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
+        160m  10100 kHz           10150 kHz
+
+        Notching for each standard band can be enabled or disabled
+        via the bit mask.
+
+        Two custom notches may be specified.  If either of these
+        are enabled via the bit mask, then the following objects
+        MUST be specified:
+
+        If customNotch1 is enabled, then both
+            vdslLineConfCustomNotch1Start
+            vdslLineConfCustomNotch1Stop
+        MUST be specified.
+
+        If customNotch2 is enabled, then both
+            vdslLineConfCustomNotch2Start
+            vdslLineConfCustomNotch2Stop
+        MUST be specified."
+    REFERENCE    "DSLF TR-057, section 2.6"
+    DEFVAL       { { } }
+    ::= { vdslLineConfProfileEntry 36 }
+
+vdslLineConfCustomNotch1Start OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kHz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the start frequency of custom HAM (Handheld
+        Amateur Radio) notch 1.  vdslLineConfCustomNotch1Start MUST
+        be less than or equal to vdslLineConfCustomNotch1Stop."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 37 }
+
+vdslLineConfCustomNotch1Stop OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kHz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the stop frequency of custom HAM (Handheld
+        Amateur Radio) notch 1.  vdslLineConfCustomNotch1Stop MUST
+        be greater than or equal to vdslLineConfCustomNotch1Start."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 38 }
+
+vdslLineConfCustomNotch2Start OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kHz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the start frequency of custom HAM (Handheld
+        Amateur Radio) notch 2.  vdslLineConfCustomNotch2Start MUST
+        be less than or equal to vdslLineConfCustomNotch2Stop."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 39 }
+
+vdslLineConfCustomNotch2Stop OBJECT-TYPE
+    SYNTAX       Unsigned32
+    UNITS        "kHz"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the stop frequency of custom HAM (Handheld
+        Amateur Radio) notch 2.  vdslLineConfCustomNotch2Stop MUST
+        be greater than or equal to vdslLineConfCustomNotch2Start."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 40 }
+
+vdslLineConfDownTargetSlowBurst OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..1275)
+    UNITS        "microseconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the target level of impulse noise (burst)
+        protection for an interleaved (slow) channel."
+    REFERENCE    "ITU-T G.997.1, section 7.3.2.3"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 41 }
+
+vdslLineConfUpTargetSlowBurst OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..1275)
+    UNITS        "microseconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Specifies the target level of impulse noise (burst)
+        protection for an interleaved (slow) channel."
+    REFERENCE    "ITU-T G.997.1, section 7.3.2.3"
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 42 }
+
+vdslLineConfDownMaxFastFec OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..50)
+    UNITS        "%"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This parameter provisions the maximum level of Forward
+        Error Correction (FEC) redundancy related overhead to
+        be maintained for a fast channel."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 43 }
+
+vdslLineConfUpMaxFastFec OBJECT-TYPE
+    SYNTAX       Unsigned32 (0..50)
+    UNITS        "%"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This parameter provisions the maximum level of Forward
+        Error Correction (FEC) redundancy related overhead to
+        be maintained for a fast channel."
+    DEFVAL       { 0 }
+    ::= { vdslLineConfProfileEntry 44 }
+
+vdslLineConfLineType OBJECT-TYPE
+    SYNTAX       INTEGER
+        {
+        noChannel(1),         -- no channels exist
+        fastOnly(2),          -- only fast channel exists
+        interleavedOnly(3),   -- only interleaved channel exists
+        fastOrInterleaved(4), -- either fast or interleaved channel
+                              -- exist, but only one at a time
+        fastAndInterleaved(5) -- both fast and interleaved channels
+                              -- exist
+        }
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This parameter provisions the VDSL physical entity at
+        start-up by defining whether and how the line will be
+        channelized, i.e., which channel type(s) are supported.
+        If the line is to be channelized, the value will be other
+        than noChannel(1).
+
+        This configuration can be activated only during start-up.
+        Afterwards, the value of vdslLineType coincides with the
+        value of vdslLineConfLineType.  Depending on this value,
+        the corresponding entries in the ifTable for the
+        interleaved and the fast channels are enabled or disabled
+        according to the value of their ifOperStatus.
+
+        Defined values are:
+
+        noChannel(1)          -- no channels exist
+        fastOnly(2)           -- only fast channel exists
+        interleavedOnly(3)    -- only interleaved channel exists
+        fastOrInterleaved(4)  -- either fast or interleaved channel
+                              -- exists, but only one at a time
+        fastAndInterleaved(5) -- both fast and interleaved channels
+                              -- exist
+
+        Note that 'slow' and 'interleaved' refer to the same
+        channel."
+    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
+    DEFVAL       { noChannel }
+    ::= { vdslLineConfProfileEntry 45 }
+
+vdslLineConfProfRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile activated by setting this object to 'active'.
+        When 'active' is set, the system will validate the profile.
+
+        Before a profile can be deleted or taken out of service
+        (by setting this object to 'destroy' or 'outOfService'),
+        it must be first unreferenced from all associated lines.
+
+        An 'active' profile may be modified at any time.  Note
+        that some changes may require that any referenced lines be
+        restarted (e.g., vdslLineConfLineType)."
+    ::= { vdslLineConfProfileEntry 46 }
+
+--
+-- Alarm configuration profile table
+--
+
+vdslLineAlarmConfProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VdslLineAlarmConfProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table contains information on the VDSL line alarm
+        configuration.  One entry in this table reflects a profile
+        defined by a manager which can be used to configure the
+        VDSL line alarm thresholds.
+
+        Entries in this table MUST be maintained in a
+        persistent manner."
+    ::= { vdslMibObjects 20 }
+
+vdslLineAlarmConfProfileEntry OBJECT-TYPE
+    SYNTAX       VdslLineAlarmConfProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Each entry consists of a list of parameters that
+        represents the configuration of a VDSL line alarm
+        profile.
+
+        A default profile with an index of 'DEFVAL', will
+        always exist and its parameters will be set to vendor
+        specific values, unless otherwise specified in this
+        document."
+    INDEX { vdslLineAlarmConfProfileName }
+    ::= { vdslLineAlarmConfProfileTable 1 }
+
+VdslLineAlarmConfProfileEntry ::=
+    SEQUENCE
+        {
+        vdslLineAlarmConfProfileName       SnmpAdminString,
+        vdslLineAlarmConfThresh15MinLofs   HCPerfIntervalThreshold,
+        vdslLineAlarmConfThresh15MinLoss   HCPerfIntervalThreshold,
+        vdslLineAlarmConfThresh15MinLprs   HCPerfIntervalThreshold,
+        vdslLineAlarmConfThresh15MinLols   HCPerfIntervalThreshold,
+        vdslLineAlarmConfThresh15MinESs    HCPerfIntervalThreshold,
+        vdslLineAlarmConfThresh15MinSESs   HCPerfIntervalThreshold,
+        vdslLineAlarmConfThresh15MinUASs   HCPerfIntervalThreshold,
+        vdslLineAlarmConfInitFailure       TruthValue,
+        vdslLineAlarmConfProfRowStatus     RowStatus
+        }
+
+vdslLineAlarmConfProfileName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The name for this profile as specified by an
+        administrator."
+    ::= { vdslLineAlarmConfProfileEntry 1 }
+
+vdslLineAlarmConfThresh15MinLofs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         loss of frame seconds (lofs) within any given 15-minute
+         performance data collection interval.  If the value of
+         loss of frame seconds in a particular 15-minute collection
+         interval reaches/exceeds this value, a
+         vdslPerfLofsThreshNotification notification will be
+         generated.  No more than one notification will be sent
+         per interval."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 2 }
+
+vdslLineAlarmConfThresh15MinLoss OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         loss of signal seconds (loss) within any given 15-minute
+         performance data collection interval.  If the value of
+         loss of signal seconds in a particular 15-minute
+         collection interval reaches/exceeds this value, a
+         vdslPerfLossThreshNotification notification will be
+         generated.  One notification will be sent per interval
+         per endpoint."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 3 }
+
+vdslLineAlarmConfThresh15MinLprs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         loss of power seconds (lprs) within any given 15-minute
+         performance data collection interval.  If the value of
+         loss of power seconds in a particular 15-minute collection
+         interval reaches/exceeds this value, a
+         vdslPerfLprsThreshNotification notification will be
+         generated.  No more than one notification will be sent
+         per interval."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 4 }
+
+vdslLineAlarmConfThresh15MinLols OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         loss of link seconds (lols) within any given 15-minute
+         performance data collection interval.  If the value of
+         loss of power seconds in a particular 15-minute collection
+         interval reaches/exceeds this value, a
+         vdslPerfLolsThreshNotification notification will be
+         generated.  No more than one notification will be sent
+         per interval."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 5 }
+
+vdslLineAlarmConfThresh15MinESs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         errored seconds (ESs) within any given 15-minute
+         performance data collection interval.  If the value of
+         errored seconds in a particular 15-minute collection
+         interval reaches/exceeds this value, a
+         vdslPerfESsThreshNotification notification will be
+         generated.  No more than one notification will be sent
+         per interval."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 6 }
+
+vdslLineAlarmConfThresh15MinSESs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         severely errored seconds (SESs) within any given 15-minute
+         performance data collection interval.  If the value of
+         severely errored seconds in a particular 15-minute
+         collection interval reaches/exceeds this value, a
+         vdslPerfSESsThreshNotification notification will be
+         generated.  No more than one notification will be sent
+         per interval."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 7 }
+
+vdslLineAlarmConfThresh15MinUASs OBJECT-TYPE
+    SYNTAX       HCPerfIntervalThreshold
+    UNITS        "seconds"
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object configures the threshold for the number of
+         unavailable seconds (UASs) within any given 15-minute
+         performance data collection interval.  If the value of
+         unavailable seconds in a particular 15-minute collection
+         interval reaches/exceeds this value, a
+         vdslPerfUASsThreshNotification notification will be
+         generated.  No more than one notification will be sent
+         per interval."
+    DEFVAL       { 0 }
+    ::= { vdslLineAlarmConfProfileEntry 8 }
+
+vdslLineAlarmConfInitFailure OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object specifies if a vdslInitFailureNotification
+        notification will be generated if an initialization
+        failure occurs."
+    DEFVAL       { false }
+    ::= { vdslLineAlarmConfProfileEntry 9 }
+
+vdslLineAlarmConfProfRowStatus OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object is used to create a new row or modify or
+        delete an existing row in this table.
+
+        A profile activated by setting this object to 'active'.
+        When 'active' is set, the system will validate the profile.
+
+        Before a profile can be deleted or taken out of service,
+        (by setting this object to 'destroy' or 'outOfService') it
+        must be first unreferenced from all associated lines.
+
+        An 'active' profile may be modified at any time."
+    ::= { vdslLineAlarmConfProfileEntry 10 }
+
+-- Notification definitions
+
+vdslNotifications OBJECT IDENTIFIER ::= { vdslLineMib 0 }
+
+vdslPerfLofsThreshNotification NOTIFICATION-TYPE
+    OBJECTS      {
+                 vdslPerfDataCurr15MinLofs
+                 }
+    STATUS       current
+    DESCRIPTION
+        "Loss of Framing 15-minute interval threshold
+         (vdslLineAlarmConfThresh15MinLofs) reached."
+    ::= { vdslNotifications 1 }
+
+vdslPerfLossThreshNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPerfDataCurr15MinLoss
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Loss of Signal 15-minute interval threshold
+        (vdslLineAlarmConfThresh15MinLoss) reached."
+    ::= { vdslNotifications 2 }
+
+vdslPerfLprsThreshNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPerfDataCurr15MinLprs
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Loss of Power 15-minute interval threshold
+        (vdslLineAlarmConfThresh15MinLprs) reached."
+    ::= { vdslNotifications 3 }
+
+vdslPerfLolsThreshNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPerfDataCurr15MinLols
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Loss of Link 15-minute interval threshold
+        (vdslLineAlarmConfThresh15MinLols) reached."
+    ::= { vdslNotifications 4 }
+
+vdslPerfESsThreshNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPerfDataCurr15MinESs
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Errored Seconds 15-minute interval threshold
+        (vdslLineAlarmConfThresh15MinESs) reached."
+    ::= { vdslNotifications 5 }
+
+vdslPerfSESsThreshNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPerfDataCurr15MinSESs
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Severely Errored Seconds 15-minute interval threshold
+        (vdslLineAlarmConfThresh15MinSESs) reached."
+    ::= { vdslNotifications 6 }
+
+vdslPerfUASsThreshNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPerfDataCurr15MinUASs
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Unavailable Seconds 15-minute interval threshold
+        (vdslLineAlarmConfThresh15MinUASs) reached."
+    ::= { vdslNotifications 7 }
+
+vdslDownMaxSnrMgnNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPhysCurrSnrMgn
+                  }
+    STATUS        current
+    DESCRIPTION
+        "The downstream Signal to Noise Margin exceeded
+        vdslLineConfDownMaxSnrMgn.  The object
+        vdslPhysCurrSnrMgn will contain the Signal to Noise
+        margin as measured by the VTU-R."
+    ::= { vdslNotifications 8 }
+
+vdslDownMinSnrMgnNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPhysCurrSnrMgn
+                  }
+    STATUS        current
+    DESCRIPTION
+        "The downstream Signal to Noise Margin fell below
+        vdslLineConfDownMinSnrMgn.  The object vdslPhysCurrSnrMgn
+        will contain the Signal to Noise margin as measured by
+        the VTU-R."
+    ::= { vdslNotifications 9 }
+
+vdslUpMaxSnrMgnNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPhysCurrSnrMgn
+                  }
+    STATUS        current
+    DESCRIPTION
+        "The upstream Signal to Noise Margin exceeded
+        vdslLineConfUpMaxSnrMgn.  The object vdslPhysCurrSnrMgn
+        will contain the Signal to Noise margin as measured
+        by the VTU-C."
+    ::= { vdslNotifications 10 }
+
+vdslUpMinSnrMgnNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPhysCurrSnrMgn
+                  }
+    STATUS        current
+    DESCRIPTION
+        "The upstream Signal to Noise Margin fell below
+        vdslLineConfUpMinSnrMgn.  The object vdslPhysCurrSnrMgn
+        will contain the Signal to Noise margin as measured
+        by the VTU-C."
+    ::= { vdslNotifications 11 }
+
+vdslInitFailureNotification NOTIFICATION-TYPE
+    OBJECTS       {
+                  vdslPhysCurrStatus
+                  }
+    STATUS        current
+    DESCRIPTION
+        "Vtu initialization failed.  See vdslPhysCurrStatus for
+        potential reasons."
+    ::= { vdslNotifications 12 }
+
+-- conformance information
+
+vdslConformance OBJECT IDENTIFIER ::= { vdslLineMib 3 }
+vdslGroups OBJECT IDENTIFIER ::= { vdslConformance 1 }
+vdslCompliances OBJECT IDENTIFIER ::= { vdslConformance 2 }
+
+vdslLineMibCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+        "The compliance statement for SNMP entities which
+        manage VDSL interfaces."
+
+    MODULE  -- this module
+    MANDATORY-GROUPS
+        {
+        vdslGroup,
+        vdslNotificationGroup
+        }
+    ::= { vdslCompliances 1 }
+
+-- units of conformance
+
+    vdslGroup OBJECT-GROUP
+        OBJECTS
+            {
+            vdslLineCoding,
+            vdslLineType,
+            vdslLineConfProfile,
+            vdslLineAlarmConfProfile,
+            vdslPhysInvSerialNumber,
+            vdslPhysInvVendorID,
+            vdslPhysInvVersionNumber,
+            vdslPhysCurrSnrMgn,
+            vdslPhysCurrAtn,
+            vdslPhysCurrStatus,
+            vdslPhysCurrOutputPwr,
+            vdslPhysCurrAttainableRate,
+            vdslPhysCurrLineRate,
+            vdslChanInterleaveDelay,
+            vdslChanCrcBlockLength,
+            vdslChanCurrTxRate,
+            vdslChanCurrTxSlowBurstProtect,
+            vdslChanCurrTxFastFec,
+            vdslPerfDataValidIntervals,
+            vdslPerfDataInvalidIntervals,
+            vdslPerfDataLofs,
+            vdslPerfDataLoss,
+            vdslPerfDataLprs,
+            vdslPerfDataLols,
+            vdslPerfDataESs,
+            vdslPerfDataSESs,
+            vdslPerfDataUASs,
+            vdslPerfDataInits,
+            vdslPerfDataCurr15MinTimeElapsed,
+            vdslPerfDataCurr15MinLofs,
+            vdslPerfDataCurr15MinLoss,
+            vdslPerfDataCurr15MinLprs,
+            vdslPerfDataCurr15MinLols,
+            vdslPerfDataCurr15MinESs,
+            vdslPerfDataCurr15MinSESs,
+            vdslPerfDataCurr15MinUASs,
+            vdslPerfDataCurr15MinInits,
+            vdslPerfData1DayValidIntervals,
+            vdslPerfData1DayInvalidIntervals,
+            vdslPerfDataCurr1DayTimeElapsed,
+            vdslPerfDataCurr1DayLofs,
+            vdslPerfDataCurr1DayLoss,
+            vdslPerfDataCurr1DayLprs,
+            vdslPerfDataCurr1DayLols,
+            vdslPerfDataCurr1DayESs,
+            vdslPerfDataCurr1DaySESs,
+            vdslPerfDataCurr1DayUASs,
+            vdslPerfDataCurr1DayInits,
+            vdslPerfIntervalLofs,
+            vdslPerfIntervalLoss,
+            vdslPerfIntervalLprs,
+            vdslPerfIntervalLols,
+            vdslPerfIntervalESs,
+            vdslPerfIntervalSESs,
+            vdslPerfIntervalUASs,
+            vdslPerfIntervalInits,
+            vdslPerf1DayIntervalMoniSecs,
+            vdslPerf1DayIntervalLofs,
+            vdslPerf1DayIntervalLoss,
+            vdslPerf1DayIntervalLprs,
+            vdslPerf1DayIntervalLols,
+            vdslPerf1DayIntervalESs,
+            vdslPerf1DayIntervalSESs,
+            vdslPerf1DayIntervalUASs,
+            vdslPerf1DayIntervalInits,
+            vdslChanValidIntervals,
+            vdslChanInvalidIntervals,
+            vdslChanFixedOctets,
+            vdslChanBadBlks,
+            vdslChanCurr15MinTimeElapsed,
+            vdslChanCurr15MinFixedOctets,
+            vdslChanCurr15MinBadBlks,
+            vdslChan1DayValidIntervals,
+            vdslChan1DayInvalidIntervals,
+            vdslChanCurr1DayTimeElapsed,
+            vdslChanCurr1DayFixedOctets,
+            vdslChanCurr1DayBadBlks,
+            vdslChanIntervalFixedOctets,
+            vdslChanIntervalBadBlks,
+            vdslChan1DayIntervalMoniSecs,
+            vdslChan1DayIntervalFixedOctets,
+            vdslChan1DayIntervalBadBlks,
+            vdslLineConfDownRateMode,
+            vdslLineConfUpRateMode,
+            vdslLineConfDownMaxPwr,
+            vdslLineConfUpMaxPwr,
+            vdslLineConfDownMaxSnrMgn,
+            vdslLineConfDownMinSnrMgn,
+            vdslLineConfDownTargetSnrMgn,
+            vdslLineConfUpMaxSnrMgn,
+            vdslLineConfUpMinSnrMgn,
+            vdslLineConfUpTargetSnrMgn,
+            vdslLineConfDownFastMaxDataRate,
+            vdslLineConfDownFastMinDataRate,
+            vdslLineConfDownSlowMaxDataRate,
+            vdslLineConfDownSlowMinDataRate,
+            vdslLineConfUpFastMaxDataRate,
+            vdslLineConfUpFastMinDataRate,
+            vdslLineConfUpSlowMaxDataRate,
+            vdslLineConfUpSlowMinDataRate,
+            vdslLineConfDownRateRatio,
+            vdslLineConfUpRateRatio,
+            vdslLineConfDownMaxInterDelay,
+            vdslLineConfUpMaxInterDelay,
+            vdslLineConfDownPboControl,
+            vdslLineConfUpPboControl,
+            vdslLineConfDownPboLevel,
+            vdslLineConfUpPboLevel,
+            vdslLineConfDeploymentScenario,
+            vdslLineConfAdslPresence,
+            vdslLineConfApplicableStandard,
+            vdslLineConfBandPlan,
+            vdslLineConfBandPlanFx,
+            vdslLineConfBandOptUsage,
+            vdslLineConfUpPsdTemplate,
+            vdslLineConfDownPsdTemplate,
+            vdslLineConfHamBandMask,
+            vdslLineConfCustomNotch1Start,
+            vdslLineConfCustomNotch1Stop,
+            vdslLineConfCustomNotch2Start,
+            vdslLineConfCustomNotch2Stop,
+            vdslLineConfDownTargetSlowBurst,
+            vdslLineConfUpTargetSlowBurst,
+            vdslLineConfDownMaxFastFec,
+            vdslLineConfUpMaxFastFec,
+            vdslLineConfLineType,
+            vdslLineConfProfRowStatus,
+            vdslLineAlarmConfThresh15MinLofs,
+            vdslLineAlarmConfThresh15MinLoss,
+            vdslLineAlarmConfThresh15MinLprs,
+            vdslLineAlarmConfThresh15MinLols,
+            vdslLineAlarmConfThresh15MinESs,
+            vdslLineAlarmConfThresh15MinSESs,
+            vdslLineAlarmConfThresh15MinUASs,
+            vdslLineAlarmConfInitFailure,
+            vdslLineAlarmConfProfRowStatus
+            }
+        STATUS     current
+        DESCRIPTION
+            "A collection of objects providing information about
+             a VDSL Line."
+        ::= { vdslGroups 1 }
+
+    vdslNotificationGroup    NOTIFICATION-GROUP
+        NOTIFICATIONS
+            {
+            vdslPerfLofsThreshNotification,
+            vdslPerfLossThreshNotification,
+            vdslPerfLprsThreshNotification,
+            vdslPerfLolsThreshNotification,
+            vdslPerfESsThreshNotification,
+            vdslPerfSESsThreshNotification,
+            vdslPerfUASsThreshNotification,
+            vdslDownMaxSnrMgnNotification,
+            vdslDownMinSnrMgnNotification,
+            vdslUpMaxSnrMgnNotification,
+            vdslUpMinSnrMgnNotification,
+            vdslInitFailureNotification
+            }
+        STATUS      current
+        DESCRIPTION
+             "This group supports notifications of significant
+             conditions associated with VDSL Lines."
+    ::= { vdslGroups 2 }
+
+END
diff --git a/snmp_builder/mibs/VDSL2-LINE-MIB.mib b/snmp_builder/mibs/VDSL2-LINE-MIB.mib
new file mode 100644
index 0000000..b48c5ce
--- /dev/null
+++ b/snmp_builder/mibs/VDSL2-LINE-MIB.mib
@@ -0,0 +1,7189 @@
+VDSL2-LINE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY,
+   OBJECT-TYPE,
+   transmission,
+   Unsigned32,
+   NOTIFICATION-TYPE,
+   Integer32,
+   Counter32
+      FROM SNMPv2-SMI
+
+   ifIndex
+      FROM IF-MIB
+
+   TruthValue,
+   RowStatus
+       FROM SNMPv2-TC
+   SnmpAdminString
+      FROM SNMP-FRAMEWORK-MIB
+
+   HCPerfIntervalThreshold,
+   HCPerfTimeElapsed
+      FROM  HC-PerfHist-TC-MIB   -- [RFC3705]
+
+   Xdsl2Unit,
+   Xdsl2Direction,
+   Xdsl2Band,
+   Xdsl2TransmissionModeType,
+   Xdsl2RaMode,
+   Xdsl2InitResult,
+   Xdsl2OperationModes,
+   Xdsl2PowerMngState,
+   Xdsl2ConfPmsForce,
+   Xdsl2LinePmMode,
+   Xdsl2LineLdsf,
+   Xdsl2LdsfResult,
+   Xdsl2LineBpsc,
+   Xdsl2BpscResult,
+   Xdsl2LineReset,
+   Xdsl2SymbolProtection,
+   Xdsl2SymbolProtection8,
+   Xdsl2MaxBer,
+   Xdsl2ChInitPolicy,
+   Xdsl2ScMaskDs,
+   Xdsl2ScMaskUs,
+   Xdsl2CarMask,
+   Xdsl2RfiBands,
+   Xdsl2PsdMaskDs,
+   Xdsl2PsdMaskUs,
+   Xdsl2Tssi,
+   Xdsl2LastTransmittedState,
+   Xdsl2LineStatus,
+   Xdsl2ChInpReport,
+   Xdsl2ChAtmStatus,
+   Xdsl2ChPtmStatus,
+   Xdsl2UpboKLF,
+   Xdsl2BandUs,
+   Xdsl2LineProfiles,
+   Xdsl2LineUs0Mask,
+   Xdsl2LineClassMask,
+   Xdsl2LineLimitMask,
+   Xdsl2LineUs0Disable,
+   Xdsl2LinePsdMaskSelectUs,
+   Xdsl2LineCeFlag,
+   Xdsl2LineSnrMode,
+   Xdsl2LineTxRefVnDs,
+   Xdsl2LineTxRefVnUs,
+   Xdsl2BitsAlloc,
+   Xdsl2MrefPsdDs,
+   Xdsl2MrefPsdUs
+
+          FROM   VDSL2-LINE-TC-MIB       -- [This document]
+
+   MODULE-COMPLIANCE,
+   OBJECT-GROUP,
+   NOTIFICATION-GROUP
+      FROM SNMPv2-CONF;
+
+vdsl2MIB MODULE-IDENTITY
+   LAST-UPDATED "200909300000Z" -- September 30, 2009
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+   Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+             Chair:     Mike Sneed
+                        Sand Channel Systems
+             Postal:    P.O. Box 37324
+                        Raleigh NC 27627-732
+             Email:     sneedmike@hotmail.com
+             Phone:     +1 206 600 7022
+
+             Co-Chair:  Menachem Dodge
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     mbdodge@ieee.org
+             Phone:     +972 3 926 8421
+
+             Co-editor: Moti Morgenstern
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     moti.morgenstern@ecitele.com
+             Phone:     +972 3 926 6258
+
+             Co-editor: Scott Baillie
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     scott.baillie@nec.com.au
+             Phone:     +61 3 9264 3986
+
+             Co-editor: Umberto Bonollo
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     umberto.bonollo@nec.com.au
+             Phone:     +61 3 9264 3385
+            "
+   DESCRIPTION
+        "
+         This document defines a Management Information Base (MIB)
+         module for use with network management protocols in the
+         Internet community for the purpose of managing VDSL2, ADSL,
+         ADSL2, and ADSL2+ lines.
+
+         The MIB module described in RFC 2662 [RFC2662] defines
+         objects used for managing Asymmetric Bit-Rate DSL (ADSL)
+
+         interfaces per [T1E1.413], [G.992.1], and [G.992.2].
+         These object descriptions are based upon the specifications
+         for the ADSL Embedded Operations Channel (EOC) as defined
+         in American National Standards Institute (ANSI) T1E1.413
+         [T1E1.413] and International Telecommunication Union (ITU-T)
+         G.992.1 [G.992.1] and G.992.2 [G.992.2].
+
+         The MIB module described in RFC 4706 [RFC4706] defines
+         objects used for managing ADSL2 interfaces per [G.992.3]
+         and [G.992.4], and ADSL2+ interfaces per [G.992.5].  That MIB
+         is also capable of managing ADSL interfaces per [T1E1.413],
+         [G.992.1], and [G.992.2].
+
+         This document does not obsolete RFC 2662 [RFC2662] or
+         RFC 4706 [RFC4706], but rather provides a more comprehensive
+         management model that manages VDSL2 interfaces per G.993.2
+         [G.993.2] as well as ADSL, ADSL2, and ADSL2+ technologies
+         per T1E1.413, G.992.1, G.992.2, G.992.3, G.992.4, and
+         G.992.5
+         ([T1E1.413], [G.992.1], [G.992.2], [G.992.3], [G.992.4], and
+         [G.992.5], respectively).
+
+         Additionally, the management framework for VDSL2 lines
+         specified by the Digital Subscriber Line Forum
+         (DSLF) has been taken into consideration [TR-129].  That
+         framework is based on the ITU-T G.997.1 standard [G.997.1] and
+         its amendment 1 [G.997.1-Am1].
+
+         The MIB module is located in the MIB tree under MIB 2
+         transmission, as discussed in the MIB-2 Integration (RFC 2863
+         [RFC2863]) section of this document.
+
+         Copyright (c) 2009 IETF Trust and the persons identified
+         as authors of the code.  All rights reserved.
+
+         Redistribution and use in source and binary forms, with
+         or without modification, are permitted provided that the
+         following conditions are met:
+
+         - Redistributions of source code must retain the above
+           copyright notice, this list of conditions and the
+           following disclaimer.
+
+         - Redistributions in binary form must reproduce the above
+           copyright notice, this list of conditions and the
+           following disclaimer in the documentation and/or other
+           materials provided with the distribution.
+
+         - Neither the name of Internet Society, IETF or IETF Trust,
+           nor the names of specific contributors, may be used to
+           endorse or promote products derived from this software
+           without specific prior written permission.
+
+         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+         CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+         INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+         MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+         DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+         CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+         SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+         NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+         LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+         HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+         CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+         OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+         SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+         This version of this MIB module is part of RFC 5650;
+         see the RFC itself for full legal notices."
+
+   REVISION "200909300000Z" -- September 30, 2009
+   DESCRIPTION "Initial version, published as RFC 5650."
+      ::= { transmission 251 }
+
+  xdsl2Notifications OBJECT IDENTIFIER ::= { vdsl2MIB 0 }
+  xdsl2Objects       OBJECT IDENTIFIER ::= { vdsl2MIB 1 }
+  xdsl2Conformance   OBJECT IDENTIFIER ::= { vdsl2MIB 2 }
+  ------------------------------------------------
+  xdsl2Line          OBJECT IDENTIFIER ::= { xdsl2Objects 1 }
+  xdsl2Status        OBJECT IDENTIFIER ::= { xdsl2Objects 2 }
+  xdsl2Inventory     OBJECT IDENTIFIER ::= { xdsl2Objects 3 }
+  xdsl2PM            OBJECT IDENTIFIER ::= { xdsl2Objects 4 }
+  xdsl2Profile       OBJECT IDENTIFIER ::= { xdsl2Objects 5 }
+  xdsl2Scalar        OBJECT IDENTIFIER ::= { xdsl2Objects 6 }
+  ------------------------------------------------
+  xdsl2PMLine      OBJECT IDENTIFIER ::= { xdsl2PM 1 }
+  xdsl2PMChannel   OBJECT IDENTIFIER ::= { xdsl2PM 2 }
+  ------------------------------------------------
+  xdsl2ProfileLine      OBJECT IDENTIFIER ::= { xdsl2Profile 1 }
+  xdsl2ProfileChannel   OBJECT IDENTIFIER ::= { xdsl2Profile 2 }
+  xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 }
+  ------------------------------------------------
+  xdsl2ScalarSC         OBJECT IDENTIFIER ::= { xdsl2Scalar 1 }
+  ------------------------------------------------
+
+------------------------------------------------
+
+--          xdsl2LineTable                    --
+------------------------------------------------
+
+xdsl2LineTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineTable contains configuration, command and
+       status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line.
+
+       Several objects in this table MUST be maintained in a persistent
+       manner."
+   ::= { xdsl2Line 1 }
+
+xdsl2LineEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The index of this table is an interface index where the
+       interface has an ifType of vdsl2(251)."
+   INDEX  { ifIndex }
+   ::= { xdsl2LineTable 1 }
+
+Xdsl2LineEntry  ::=
+   SEQUENCE {
+      xdsl2LineConfTemplate            SnmpAdminString,
+      xdsl2LineConfFallbackTemplate    SnmpAdminString,
+      xdsl2LineAlarmConfTemplate       SnmpAdminString,
+      xdsl2LineCmndConfPmsf            Xdsl2ConfPmsForce,
+      xdsl2LineCmndConfLdsf            Xdsl2LineLdsf,
+      xdsl2LineCmndConfLdsfFailReason  Xdsl2LdsfResult,
+      xdsl2LineCmndConfBpsc            Xdsl2LineBpsc,
+      xdsl2LineCmndConfBpscFailReason  Xdsl2BpscResult,
+      xdsl2LineCmndConfBpscRequests    Counter32,
+      xdsl2LineCmndAutomodeColdStart   TruthValue,
+      xdsl2LineCmndConfReset           Xdsl2LineReset,
+      xdsl2LineStatusActTemplate       SnmpAdminString,
+      xdsl2LineStatusXtuTransSys       Xdsl2TransmissionModeType,
+      xdsl2LineStatusPwrMngState       Xdsl2PowerMngState,
+      xdsl2LineStatusInitResult        Xdsl2InitResult,
+      xdsl2LineStatusLastStateDs       Xdsl2LastTransmittedState,
+      xdsl2LineStatusLastStateUs       Xdsl2LastTransmittedState,
+      xdsl2LineStatusXtur              Xdsl2LineStatus,
+      xdsl2LineStatusXtuc              Xdsl2LineStatus,
+      xdsl2LineStatusAttainableRateDs  Unsigned32,
+      xdsl2LineStatusAttainableRateUs  Unsigned32,
+      xdsl2LineStatusActPsdDs          Integer32,
+      xdsl2LineStatusActPsdUs          Integer32,
+      xdsl2LineStatusActAtpDs          Integer32,
+      xdsl2LineStatusActAtpUs          Integer32,
+      xdsl2LineStatusActProfile        Xdsl2LineProfiles,
+      xdsl2LineStatusActLimitMask      Xdsl2LineLimitMask,
+      xdsl2LineStatusActUs0Mask        Xdsl2LineUs0Mask,
+      xdsl2LineStatusActSnrModeDs      Xdsl2LineSnrMode,
+      xdsl2LineStatusActSnrModeUs      Xdsl2LineSnrMode,
+      xdsl2LineStatusElectricalLength  Unsigned32,
+      xdsl2LineStatusTssiDs            Xdsl2Tssi,
+      xdsl2LineStatusTssiUs            Xdsl2Tssi,
+      xdsl2LineStatusMrefPsdDs         Xdsl2MrefPsdDs,
+      xdsl2LineStatusMrefPsdUs         Xdsl2MrefPsdUs,
+      xdsl2LineStatusTrellisDs         TruthValue,
+      xdsl2LineStatusTrellisUs         TruthValue,
+      xdsl2LineStatusActualCe          Unsigned32
+   }
+
+xdsl2LineConfTemplate  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the xDSL2
+       Line Configuration Template Table, xdsl2LineConfTemplateTable,
+       that applies for this line.
+
+       This object MUST be maintained in a persistent manner."
+   REFERENCE    "DSL Forum TR-129, paragraph #5.1"
+   DEFVAL       { "DEFVAL" }
+   ::= { xdsl2LineEntry 1 }
+
+xdsl2LineConfFallbackTemplate  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "This object is used to identify the template that will be
+       used if the xDSL2 line fails to operate using the primary
+       template.  The primary template is identified using the
+       xdsl2LineConfTemplate object.
+
+       For example, a xDSL2 line may fall back to a template with a
+       lower rate if the rate specified in the primary template
+       cannot be achieved.
+
+       The value of this object identifies a row in the xDSL2 Line
+
+       Configuration Template Table, xdsl2LineConfTemplateTable.
+       Any row in the xdsl2LineConfTemplateTable table may be used as a
+       fall-back template.
+
+       If the xDSL2 line fails to operate using the fall-back template,
+       then the primary template should be retried.
+       The xTU-C should continue to alternate between the primary and
+       fall-back templates until one of them succeeds.
+
+       If the value of this object is a zero-length string, then no
+       fall-back template is defined and only the primary template will
+       be used.
+
+       Note that implementation of this object is not mandatory.
+       If this object is not supported, any attempt to modify this
+       object should result in the SET request being rejected.
+
+       This object MUST be maintained in a persistent manner."
+   ::= { xdsl2LineEntry 2 }
+
+xdsl2LineAlarmConfTemplate  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the xDSL2
+       Line Alarm Configuration Template Table,
+       xdsl2LineAlarmConfTemplateTable, which applies to this line.
+
+       This object MUST be maintained in a persistent manner."
+   REFERENCE    "DSL Forum TR-129, paragraph #5.1"
+   DEFVAL       { "DEFVAL" }
+   ::= { xdsl2LineEntry 3 }
+
+xdsl2LineCmndConfPmsf  OBJECT-TYPE
+   SYNTAX      Xdsl2ConfPmsForce
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "Power management state forced (PMSF).  Defines the line
+       states to be forced by the near-end xTU on this line.
+       This object MUST be maintained in a persistent manner."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.3 (PMSF)"
+   DEFVAL       { l3toL0 }
+   ::= { xdsl2LineEntry 4 }
+
+xdsl2LineCmndConfLdsf  OBJECT-TYPE
+   SYNTAX      Xdsl2LineLdsf
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "Loop diagnostic state forced (LDSF).
+       Defines whether the line should be forced into the loop
+       diagnostics mode by the near-end xTU of this line.  Note that
+       a loop diagnostic may be initiated by the far-end xTU at any
+       time.
+
+       Only when the xdsl2LineStatusPwrMngState object is in the
+       'l3' state and the xdsl2LineCmndConfPmsf object is in the
+       'l0orL2toL3' state, can the line be forced into loop diagnostic
+       mode procedures.  Upon successful completion of the loop
+       diagnostic mode procedures, the Access Node shall set this
+       object to 'inhibit', and xdsl2LineStatusPwrMngState will
+       remain in the 'l3' state.  The loop diagnostic data shall be
+       available at least until xdsl2LineCmndConfPmsf is set to the
+       'l3toL0' state.
+
+       The results of the loop diagnostic procedure are stored in the
+       tables xdsl2SCStatusTable, xdsl2SCStatusBandTable, and
+       xdsl2SCStatusSegmentTable.  The status of the loop diagnostic
+       procedure is indicated by xdsl2LineCmndConfLdsfFailReason.
+
+       As long as loop diagnostic procedures are not completed
+       successfully, attempts shall be made to do so, until the loop
+       diagnostic mode is no longer forced on the line through this
+       configuration parameter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.8 (LDSF)"
+   DEFVAL       { inhibit }
+   ::= { xdsl2LineEntry 5 }
+
+xdsl2LineCmndConfLdsfFailReason  OBJECT-TYPE
+   SYNTAX      Xdsl2LdsfResult
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The status of the most recent occasion when the loop
+       diagnostics state forced (LDSF) command was issued for the
+       associated line."
+   DEFVAL       { none }
+   ::= { xdsl2LineEntry 6 }
+
+xdsl2LineCmndConfBpsc  OBJECT-TYPE
+   SYNTAX      Xdsl2LineBpsc
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "Request a bits-per-subcarrier measurement to be made.
+
+       A request for a bits-per-subcarrier measurement is made by
+       setting this object to the value of 'measure'.  Upon
+       completion of the measurement request, the Access Node shall set
+       this object to 'idle'.
+
+       The SNMP agent should allow initiating a bits-per-subcarrier
+       measurement process only if there is no other bits-per-subcarrier
+       measurement already running, and respond with an SNMP error
+       (e.g., wrongValue) otherwise.
+
+       Note that a bits-per-subcarrier measurement is also performed
+       during a line diagnostic procedure.  This object provides an
+       additional mechanism to fetch the bits-per-subcarrier data.  This
+       additional mechanism is provided so that bits-per-subcarrier
+       data may be fetched without forcing the line into no power state.
+       This is useful because the bits-per-subcarrier allocation may be
+       adjusted at show time due to rate adaption and bit swapping.
+
+       The implementation of this additional mechanism for measuring
+       bits per subcarrier is not mandatory.
+
+       The results of the bits-per-subcarrier measurement are stored in
+       xdsl2LineSegmentTable.  The status of the bits-per-subcarrier
+       measurement is indicated by
+       xdsl2LineCmndConfBpscFailReason."
+   DEFVAL       { idle }
+   ::= { xdsl2LineEntry 7 }
+
+xdsl2LineCmndConfBpscFailReason  OBJECT-TYPE
+   SYNTAX      Xdsl2BpscResult
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The status of the most recent bits-per-subcarrier
+       measurement request issued for the associated line."
+   DEFVAL       { none }
+   ::= { xdsl2LineEntry 8 }
+
+xdsl2LineCmndConfBpscRequests  OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Measurement request counter.
+       This counter is incremented by one every time a request for a
+       bits-per-subcarrier measurement is made.  A measurement request
+
+       is made by modifying the xdsl2LineCmndConfBpsc object from
+       idle(1) to the value measure(2).
+
+       The measurement results may be very large and will not fit
+       into a single PDU; hence, multiple SNMP GET requests may be
+       required to fetch the measurement results.
+       Because the measurement results cannot be fetched atomically,
+       it is possible for a second manager to start a new measurement
+       before a first manager has fetched all of its results.
+       An SNMP manager can use this object to ensure that the
+       measurement results retrieved using one or more GET requests
+       all belong to the measurement initiated by that manager.
+
+       The following steps are suggested in order for the SNMP
+       manager to initiate the bits-per-subcarrier measurement:
+
+       1. Wait for xdsl2LineCmndConfBpsc value to be idle(1).
+       2. Perform an SNMP GET for xdsl2LineCmndConfBpscRequests.
+       3. Wait a short delay (4 -> 8 seconds).
+       4. Perform an SNMP SET on xdsl2LineCmndConfBpsc with
+          the value measure(2).
+       5. If step 4 returns an error, then go to step 1.
+       6. Wait for xdsl2LineCmndConfBpsc value to be idle(1).
+       7. Fetch measurement results using one or more GET PDUs.
+       8. Perform an SNMP GET for xdsl2LineCmndConfBpscRequests.
+       9. Compute the difference between the two values of
+          xdsl2LineCmndConfBpscRequests.  If the value is one,
+          then the results are valid, else go to step 1."
+   ::= { xdsl2LineEntry 9 }
+
+xdsl2LineCmndAutomodeColdStart   OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-write
+   STATUS      current
+   DESCRIPTION
+      "Automode cold start forced.  This parameter is defined in
+       order to improve testing of the performance of xTUs supporting
+       automode when it is enabled in the MIB.
+       Change the value of this parameter to 'true' to indicate a change
+       in loop conditions applied to the devices under the test.  The
+       xTUs shall reset any historical information used for automode
+       and for shortening G.994.1 handshake and initialization.
+
+       Automode is the case where multiple operation-modes are enabled
+       through the xdsl2LConfProfXtuTransSysEna object in the line
+       configuration profile being used for the line, and where the
+       selection of the actual operation-mode depends not only on the
+       common capabilities of both xTUs (as exchanged in G.994.1), but
+
+       also on achievable data rates under given loop conditions."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.10
+                (Automode Cold Start Forced)"
+   DEFVAL       { false }
+   ::= { xdsl2LineEntry 10 }
+
+xdsl2LineCmndConfReset   OBJECT-TYPE
+      SYNTAX      Xdsl2LineReset
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+         "Request a line reset to occur.
+          If this object is set to the value of 'reset', then force
+          the line to reset (i.e., the modems will retrain).
+          When the line has successfully reset, the SNMP agent will
+          set the value of this object to 'idle'.
+
+          Note that the xdsl2LineCmndConfPmsf object will always take
+          precedence over this object.
+          If the xdsl2LineCmndConfPmsf object is set to the value
+          'l0orL2toL3', then the line MUST NOT return to the Showtime
+          state due to a reset request action performed using this
+          object."
+   DEFVAL       { idle }
+      ::= { xdsl2LineEntry 11 }
+
+xdsl2LineStatusActTemplate  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This object is used to identify the template that is
+       currently in use for this line.
+       This object is updated when a successful line initialization
+       occurs.
+       This object indicates if the primary template
+       (xdsl2LineConfTemplate) is in use or the fall-back template
+       (xdsl2LineConfFallbackTemplate) is in use.
+       If the line is not successfully initialized, then the value of
+       this object will be a zero-length string."
+   ::= { xdsl2LineEntry 12 }
+
+xdsl2LineStatusXtuTransSys  OBJECT-TYPE
+   SYNTAX      Xdsl2TransmissionModeType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The xTU Transmission System (xTS) in use.
+
+       It is coded in a bitmap representation with one bit set to
+       '1' (the selected coding for the DSL line).  This
+       parameter may be derived from the handshaking procedures defined
+       in Recommendation G.994.1.  A set of xDSL line transmission
+       modes, with one bit per mode."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.1
+                (xDSL transmission system)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineEntry 13 }
+
+xdsl2LineStatusPwrMngState  OBJECT-TYPE
+   SYNTAX      Xdsl2PowerMngState
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The current power management state."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.5
+                (Line power management state)"
+   DEFVAL       { l3 }
+      ::= { xdsl2LineEntry 14 }
+
+xdsl2LineStatusInitResult  OBJECT-TYPE
+   SYNTAX      Xdsl2InitResult
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates the result of the last full initialization
+       performed on the line."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.6
+                (Initialization success/failure cause)"
+   DEFVAL       { noFail }
+   ::= { xdsl2LineEntry 15 }
+
+xdsl2LineStatusLastStateDs  OBJECT-TYPE
+   SYNTAX      Xdsl2LastTransmittedState
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The last successful transmitted initialization state in
+       the downstream direction in the last full initialization
+       performed on the line."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.7
+                (Downstream last transmitted state)"
+   DEFVAL       { atucG9941 }
+   ::= { xdsl2LineEntry 16 }
+
+xdsl2LineStatusLastStateUs  OBJECT-TYPE
+   SYNTAX      Xdsl2LastTransmittedState
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The last successful transmitted initialization state in the
+       upstream direction in the last full initialization performed on
+       the line."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.8
+                (Upstream last transmitted state)"
+   DEFVAL       { aturG9941 }
+   ::= { xdsl2LineEntry 17 }
+
+xdsl2LineStatusXtur  OBJECT-TYPE
+   SYNTAX      Xdsl2LineStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates the current state (existing failures) of the xTU-R.
+       This is a bitmap of possible conditions."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.1.1.2
+                (Line far-end failures)"
+   DEFVAL       { { noDefect } }
+   ::= { xdsl2LineEntry 18 }
+
+xdsl2LineStatusXtuc  OBJECT-TYPE
+   SYNTAX      Xdsl2LineStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates the current state (existing failures) of the xTU-C.
+       This is a bitmap of possible conditions."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.1.1.1
+                (Line near-end failures)"
+   DEFVAL       { { noDefect } }
+   ::= { xdsl2LineEntry 19 }
+
+xdsl2LineStatusAttainableRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Maximum Attainable Data Rate Downstream.
+       The maximum downstream net data rate currently attainable by
+       the xTU-C transmitter and the xTU-R receiver, coded in
+       bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.19 (ATTNDRds)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineEntry 20 }
+
+xdsl2LineStatusAttainableRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Maximum Attainable Data Rate Upstream.
+       The maximum upstream net data rate currently attainable by the
+       xTU-R transmitter and the xTU-C receiver, coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.20 (ATTNDRus)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineEntry 21 }
+
+xdsl2LineStatusActPsdDs OBJECT-TYPE
+   SYNTAX      Integer32 (-900..0 | 2147483647)
+   UNITS       "0.1 dBm/Hz"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Power Spectral Density (PSD) Downstream.  The average
+       downstream transmit PSD over the subcarriers used for downstream.
+       It ranges from -900 to 0 units of 0.1 dBm/Hz (physical values are
+       -90 to 0 dBm/Hz).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+       out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.21 (ACTPSDds)"
+   DEFVAL       { 2147483647 }
+   ::= { xdsl2LineEntry 22 }
+
+xdsl2LineStatusActPsdUs OBJECT-TYPE
+   SYNTAX      Integer32 (-900..0 | 2147483647)
+   UNITS       "0.1 dBm/Hz"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Power Spectral Density (PSD) Upstream.  The average
+       upstream transmit PSD over the subcarriers used for upstream.
+       It ranges from -900 to 0 units of 0.1 dBm/Hz (physical values are
+       -90 to 0 dBm/Hz).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+       out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.22 (ACTPSDus)"
+   DEFVAL       { 2147483647 }
+   ::= { xdsl2LineEntry 23 }
+
+xdsl2LineStatusActAtpDs  OBJECT-TYPE
+   SYNTAX      Integer32 (-310..310 | 2147483647)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Aggregate Transmit Power Downstream.
+       The total amount of transmit power delivered by the xTU-C at
+       the U-C reference point, at the instant of measurement.  It
+       ranges from -310 to 310 units of 0.1 dBm (physical values are -31
+       to 31 dBm).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+       out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.24 (ACTATPds)"
+   DEFVAL       { 2147483647 }
+   ::= { xdsl2LineEntry 24 }
+
+xdsl2LineStatusActAtpUs  OBJECT-TYPE
+   SYNTAX      Integer32 (-310..310 | 2147483647)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual Aggregate Transmit Power Upstream.
+       The total amount of transmit power delivered by the xTU-R at the
+       U-R reference point, at the instant of measurement.  It ranges
+       from -310 to 310 units of 0.1 dBm (physical values are -31
+       to 31 dBm).
+       A value of 0x7FFFFFFF (2147483647) indicates the measurement is
+       out of range to be represented."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.25 (ACTATPus)"
+   DEFVAL       { 2147483647 }
+   ::= { xdsl2LineEntry 25 }
+
+xdsl2LineStatusActProfile  OBJECT-TYPE
+   SYNTAX      Xdsl2LineProfiles
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The G.993.2 profile in use.
+       The configuration parameter xdsl2LConfProfProfiles defines
+       the set of allowed G.993.2 profiles.  This parameter indicates
+       the profile in use on this line.
+       This parameter may be derived from the handshaking procedures
+       defined in ITU-T Recommendation G.994.1."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.2 (VDSL2 Profile)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineEntry 26 }
+
+xdsl2LineStatusActLimitMask  OBJECT-TYPE
+   SYNTAX      Xdsl2LineLimitMask
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The Limit PSD mask and band plan in use.
+       The configuration parameter xdsl2LConfProfLimitMask defines
+       the set of allowed G.993.2 limit PSD masks.
+       This parameter indicates the limit PSD mask in use on this
+       line."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.3
+                (VDSL2 Limit PSD Mask and Band plan)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineEntry 27 }
+
+xdsl2LineStatusActUs0Mask  OBJECT-TYPE
+   SYNTAX      Xdsl2LineUs0Mask
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The US0 PSD mask in use.
+       The configuration parameter xdsl2LConfProfUs0Mask defines
+       the set of allowed US0 PSD masks.
+       This parameter indicates the US0 PSD mask in use on this line.
+       This parameter may be derived from the handshaking procedures
+       defined in ITU-T Recommendation G.994.1."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.4
+                (VDSL2 US0 PSD Mask)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineEntry 28 }
+
+xdsl2LineStatusActSnrModeDs  OBJECT-TYPE
+   SYNTAX      Xdsl2LineSnrMode
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This parameter indicates if the transmitter-referred
+       virtual noise is active on the line in the downstream
+       direction.
+       The configuration parameter xdsl2LConfProfSnrModeDs is used to
+       configure referred virtual noise."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)"
+   DEFVAL       { virtualNoiseDisabled }
+   ::= { xdsl2LineEntry 29 }
+
+xdsl2LineStatusActSnrModeUs  OBJECT-TYPE
+   SYNTAX      Xdsl2LineSnrMode
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This parameter indicates if the transmitter-referred virtual
+       noise is active on the line in the upstream direction.
+       The configuration parameter xdsl2LConfProfSnrModeUs is used to
+       configure referred virtual noise."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)"
+   DEFVAL       { virtualNoiseDisabled }
+   ::= { xdsl2LineEntry 30 }
+
+xdsl2LineStatusElectricalLength  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1280)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This parameter contains the estimated electrical length
+       expressed in dB at 1 MHz, kl0.  This is the final electrical
+       length that would have been sent from the VTU-O to VTU-R if the
+       electrical length was not forced by the CO-MIB.
+       The value ranges from 0 to 128 dB in steps of 0.1 dB."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.23 (UPBOKLE)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineEntry 31 }
+
+xdsl2LineStatusTssiDs  OBJECT-TYPE
+     SYNTAX      Xdsl2Tssi
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The transmit spectrum shaping (TSSi) breakpoints expressed
+      as the set of breakpoints exchanged
+      during G.994.1 (Downstream)."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)"
+     ::= { xdsl2LineEntry 32 }
+
+xdsl2LineStatusTssiUs  OBJECT-TYPE
+     SYNTAX      Xdsl2Tssi
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The transmit spectrum shaping (TSSi) breakpoints expressed
+      as the set of breakpoints exchanged
+      during G.994.1 (Upstream)."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.29.6 (TSSpsus)"
+     ::= { xdsl2LineEntry 33 }
+
+xdsl2LineStatusMrefPsdDs  OBJECT-TYPE
+     SYNTAX      Xdsl2MrefPsdDs
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The MEDLEY Reference PSD status parameters
+      in the downstream
+      direction expressed as the set of breakpoints exchanged at
+      initialization."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.29.7 (MREFPSDds)"
+     ::= { xdsl2LineEntry 34 }
+
+xdsl2LineStatusMrefPsdUs  OBJECT-TYPE
+     SYNTAX      Xdsl2MrefPsdUs
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The MEDLEY Reference PSD status parameters in the
+      upstream direction expressed as the set of breakpoints
+      exchanged at initialization."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.29.8 (MREFPSDus)"
+     ::= { xdsl2LineEntry 35 }
+
+xdsl2LineStatusTrellisDs  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This parameter reports whether trellis coding is in use in
+      the downstream direction."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.30 (TRELLISds)"
+   DEFVAL       { false }
+   ::= { xdsl2LineEntry 36 }
+
+xdsl2LineStatusTrellisUs  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This parameter reports whether trellis coding is in use in
+      the upstream direction."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.31 (TRELLISus)"
+   DEFVAL       { false }
+   ::= { xdsl2LineEntry 37 }
+
+xdsl2LineStatusActualCe  OBJECT-TYPE
+   SYNTAX      Unsigned32 (2..16)
+   UNITS       "N/32 samples"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "(ACTUALCE)
+       This parameter reports the cyclic extension used on the line.  It
+       is coded as an unsigned integer from 2 to 16 in units of N/32
+       samples, where 2N is the Inverse Discrete Fourier Transform
+       (IDFT) size."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.32 (ACTUALCE)"
+   DEFVAL       { 2 }
+   ::= { xdsl2LineEntry 38 }
+
+------------------------------------------------
+--          xdsl2LineSegmentTable             --
+------------------------------------------------
+
+xdsl2LineSegmentTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineSegmentEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineSegmentTable contains status parameters
+       of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
+       The parameters in this table are updated when a measurement
+       request is made using the xdsl2LineCmndConfBpsc object.
+
+       Note that a bits-per-subcarrier measurement is also performed
+       during a line diagnostic procedure.  This table provides an
+       additional mechanism to fetch the bits-per-subcarrier data.  This
+       additional mechanism is provided so that bits-per-subcarrier
+       data may be fetched without forcing the line into no power state.
+       This is useful because the bits-per-subcarrier allocation may be
+       adjusted at Showtime due to rate adaption and bit swapping.
+
+       The implementation of this additional mechanism for measuring
+       bits per subcarrier is not mandatory."
+   ::= { xdsl2Status 1 }
+
+xdsl2LineSegmentEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineSegmentEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineSegmentEntry contains status parameters
+       of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
+
+       Objects in the table refer to NSus and NSds.  For G.993.2, the
+       value of NSus and NSds are, respectively, the indices of the
+       highest supported upstream and downstream subcarriers according
+       to the selected implementation profile.  For ADSL, NSus is equal
+       to NSCus-1 and NSds is equal to NSCds-1.
+
+       One index of this table is an interface index where the interface
+       has an ifType of vdsl2(251).  A second index of this table is the
+       transmission direction.  A third index identifies the specific
+       segment of the subcarriers status addressed."
+   INDEX  { ifIndex,
+            xdsl2LineSegmentDirection,
+            xdsl2LineSegment   }
+   ::= { xdsl2LineSegmentTable 1 }
+
+Xdsl2LineSegmentEntry  ::=
+   SEQUENCE {
+      xdsl2LineSegmentDirection         Xdsl2Direction,
+      xdsl2LineSegment                  Unsigned32,
+      xdsl2LineSegmentBitsAlloc         Xdsl2BitsAlloc,
+      xdsl2LineSegmentRowStatus         RowStatus
+   }
+
+xdsl2LineSegmentDirection  OBJECT-TYPE
+     SYNTAX      Xdsl2Direction
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "The direction of the subcarrier either
+      upstream or downstream."
+     ::= { xdsl2LineSegmentEntry 1 }
+
+xdsl2LineSegment  OBJECT-TYPE
+     SYNTAX      Unsigned32(1..8)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "The segment of the subcarriers status information
+      provided by this row.
+      Status parameters in this table are retrieved in segments.
+      The first segment of the status information is retrieved with
+      xdsl2LineSegment=1, the second segment is retrieved with
+      xdsl2LineSegment=2, and so on.  When a status parameter is
+      retrieved in n segments where n<8) then, for that parameter,
+      GET operations for the remaining segment numbers (n+1 to 8) will
+      respond with a zero-length OCTET STRING."
+     ::= { xdsl2LineSegmentEntry 2 }
+
+xdsl2LineSegmentBitsAlloc  OBJECT-TYPE
+     SYNTAX      Xdsl2BitsAlloc
+     UNITS       "bits"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The bits allocation per subcarrier.  An array of 256 octets
+      (512 nibbles), designed for supporting up to 512 (downstream)
+      subcarriers.  When more than 512 subcarriers are supported, the
+      status information is reported through multiple (up to 8)
+      segments.  The first segment is then used for the first 512
+      subcarriers.  The second segment is used for the subcarriers
+      512 to 1023 and so on.
+      The aggregate number of utilized nibbles in the downstream
+      direction (in all segments) depends on NSds; in the
+      upstream direction, it depends on NSus.
+      This value is referred to here as NS.  The segment number is in
+      xdsl2SCStatusSegment.
+      Nibble i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
+      segment is set to a value in the range 0 to 15 to indicate that
+      the respective downstream or upstream subcarrier j
+      (j=(segement-1)*512+i) has the same amount of bits
+      allocation."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
+                 and paragraph #7.5.1.29.2 (BITSpsus)"
+     ::= { xdsl2LineSegmentEntry 3 }
+
+xdsl2LineSegmentRowStatus  OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+     "Row Status.  The SNMP agent will create a row in this table
+      for storing the results of a measurement performed on the
+      associated line, if the row does not already exist.
+
+      The SNMP manager is not permitted to create rows in this table or
+      set the row status to 'notInService'.  In the first case,
+      if the SNMP manager tries to create a new row, the SNMP agent
+      responds with the value 'noCreation' in the error status
+      field of the response-PDU.  In the latter case, the SNMP agent
+      responds with the value 'wrongValue' in the error status
+      field of the response-PDU.
+
+      The SNMP agent may have limited resources; therefore, if multiple
+      rows coexist in this table, it may fail to add new rows to this
+      table or allocate memory resources.
+      If that occurs, the SNMP agent responds with the value
+      'noResources' (for the xdsl2LineCmndConfBpscFailReason
+      object in xdsl2LineTable).
+
+      The management system (the operator) may delete rows from this
+      table according to any scheme.  For example, after retrieving
+      the results.
+
+      When the SNMP manager deletes any row in this table, the SNMP
+      agent MUST delete all rows in this table that have the same
+      ifIndex value."
+     ::= { xdsl2LineSegmentEntry 4 }
+
+------------------------------------------------
+--          xdsl2LineBandTable                --
+------------------------------------------------
+
+xdsl2LineBandTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineBandEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineBandTable contains the, per-band line
+       status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line.
+       The parameters in this table are updated at line initialization
+       time and at Showtime."
+   ::= { xdsl2Line 2 }
+
+xdsl2LineBandEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineBandEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+       interface
+       has an ifType of vdsl2(251).  A second index of this table is a
+       per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+."
+   INDEX  { ifIndex, xdsl2LineBand }
+   ::= { xdsl2LineBandTable 1 }
+
+Xdsl2LineBandEntry  ::=
+   SEQUENCE {
+      xdsl2LineBand                        Xdsl2Band,
+      xdsl2LineBandStatusLnAtten           Unsigned32,
+      xdsl2LineBandStatusSigAtten          Unsigned32,
+      xdsl2LineBandStatusSnrMargin         Integer32
+   }
+
+xdsl2LineBand OBJECT-TYPE
+     SYNTAX      Xdsl2Band
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "Identifies the band(s) associated with this line.
+      For ADSL/ADSL2/ADSL2+, the values 'upstream' and 'downstream'
+      will always be present.
+
+      For VDSL2, a subset of {'us0', 'ds1', 'us1' ... 'ds4', 'us4' }
+      will always be present, together with rows for
+      'upstream' and 'downstream', in which only the
+      xdsl2LineBandStatusSnrMargin object is expected to hold a valid
+      (average) measurement."
+     ::= { xdsl2LineBandEntry 1 }
+
+xdsl2LineBandStatusLnAtten  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Line Attenuation.
+       When referring to a band in the downstream direction, it is
+       the measured difference in the total power transmitted by the
+       xTU-C and the total power received by the xTU-R over all
+       subcarriers of that band during initialization.
+
+       When referring to a band in the upstream direction, it is the
+       measured difference in the total power transmitted by the xTU-R
+       and the total power received by the xTU-C over all subcarriers of
+       that band during initialization.
+
+       Values range from 0 to 1270 in units of 0.1 dB (physical values
+       are 0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
+               and paragraph #7.5.1.10 (LATNus)6"
+   DEFVAL       { 2147483646 }
+   ::= { xdsl2LineBandEntry 2 }
+
+xdsl2LineBandStatusSigAtten  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Signal Attenuation.
+       When referring to a band in the downstream direction, it is
+       the measured difference in the total power transmitted by the
+       xTU-C and the total power received by the xTU-R over all
+       subcarriers of that band during Showtime.
+
+       When referring to a band in the upstream direction, it is the
+
+       measured difference in the total power transmitted by the xTU-R
+       and the total power received by the xTU-C over all subcarriers of
+       that band during Showtime.
+
+       Values range from 0 to 1270 in units of 0.1 dB (physical values
+       are 0 to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
+                 and paragraph #7.5.1.12 (SATNus)"
+   DEFVAL       { 2147483646 }
+   ::= { xdsl2LineBandEntry 3 }
+
+xdsl2LineBandStatusSnrMargin  OBJECT-TYPE
+   SYNTAX      Integer32 (-640..630 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "SNR Margin is the maximum increase in dB of the noise power
+       received at the xTU (xTU-R for a band in the downstream direction
+       and xTU-C for a band in the upstream direction), such that the
+       BER requirements are met for all bearer channels received at the
+       xTU.  Values range from -640 to 630 in units of 0.1 dB (physical
+       values are -64 to 63 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the SNR
+       Margin is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the SNR
+       Margin measurement is currently unavailable."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
+                 and paragraph #7.5.1.14 (SNRMpbds)
+                 and paragraph #7.5.1.16 (SNRMus)
+                 and paragraph #7.5.1.17 (SNRMpbus)"
+   DEFVAL       { 2147483646 }
+   ::= { xdsl2LineBandEntry 4 }
+
+------------------------------------------------
+--        xdsl2ChannelStatusTable             --
+------------------------------------------------
+
+xdsl2ChannelStatusTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2ChannelStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2ChannelStatusTable contains status
+
+       parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel.
+       This table contains live data from equipment."
+   ::= { xdsl2Status 2 }
+
+xdsl2ChannelStatusEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2ChannelStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+        interface has an ifType of a DSL channel.  A second index of
+        this table is the termination unit."
+   INDEX  { ifIndex, xdsl2ChStatusUnit }
+   ::= { xdsl2ChannelStatusTable 1 }
+
+Xdsl2ChannelStatusEntry  ::=
+   SEQUENCE {
+      xdsl2ChStatusUnit                Xdsl2Unit,
+      xdsl2ChStatusActDataRate         Unsigned32,
+      xdsl2ChStatusPrevDataRate        Unsigned32,
+      xdsl2ChStatusActDelay            Unsigned32,
+      xdsl2ChStatusActInp              Unsigned32,
+      xdsl2ChStatusInpReport           Xdsl2ChInpReport,
+      xdsl2ChStatusNFec                Unsigned32,
+      xdsl2ChStatusRFec                Unsigned32,
+      xdsl2ChStatusLSymb               Unsigned32,
+      xdsl2ChStatusIntlvDepth          Unsigned32,
+      xdsl2ChStatusIntlvBlock          Unsigned32,
+      xdsl2ChStatusLPath               Unsigned32,
+      xdsl2ChStatusAtmStatus           Xdsl2ChAtmStatus,
+      xdsl2ChStatusPtmStatus           Xdsl2ChPtmStatus
+   }
+
+xdsl2ChStatusUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { xdsl2ChannelStatusEntry 1 }
+
+xdsl2ChStatusActDataRate  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The actual net data rate at which the bearer channel is
+
+       operating, if in L0 power management state.  In L1 or L2
+       states, it relates to the previous L0 state.  The data rate is
+       coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.1
+                (Actual data rate)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 2 }
+
+xdsl2ChStatusPrevDataRate  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The previous net data rate that the bearer channel was
+       operating at just before the latest rate change event.  This
+       could be a full or short initialization, fast retrain, DRA or
+       power management transitions, excluding transitions between L0
+       state and L1 or L2 states.  The data rate is coded in
+       bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.2
+                (Previous data rate)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 3 }
+
+xdsl2ChStatusActDelay  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..8176)
+   UNITS       "milliseconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The actual one-way interleaving delay introduced by the
+       PMS-TC in the direction of the bearer channel, if in L0 power
+       management state.  In L1 or L2 states, it relates to the previous
+       L0 state.  It is coded in ms (rounded to the nearest ms)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.3
+                (Actual interleaving delay)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 4 }
+
+xdsl2ChStatusActInp  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..255)
+   UNITS       "0.1 symbols"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual impulse noise protection.
+       This parameter reports the actual impulse noise protection (INP)
+
+       on the bearer channel in the L0 state.  In the L1 or L2 state,
+       the parameter contains the INP in the previous L0 state.  For
+       ADSL, this value is computed according to the formula specified
+       in the relevant Recommendation based on the actual framing
+       parameters.  For ITU-T Recommendation G.993.2, the method to
+       report this value is according to the INPREPORT parameter.
+       The value is coded in fractions of DMT symbols with a
+       granularity of 0.1 symbols.  The range is from 0 to 25.4.
+       The special value of 255 indicates an ACTINP higher
+       than 25.4."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.4 (ACTINP)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 5 }
+
+xdsl2ChStatusInpReport  OBJECT-TYPE
+   SYNTAX      Xdsl2ChInpReport
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Impulse noise protection reporting mode."
+   REFERENCE    "ITU-T G.997.1 Amendment 1, paragraph #7.5.2.5
+                (INPREPORT)"
+   DEFVAL       { inpComputedUsingFormula }
+   ::= { xdsl2ChannelStatusEntry 6 }
+
+xdsl2ChStatusNFec  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..255)
+   UNITS       "bytes"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual size of Reed-Solomon codeword.
+       This parameter reports the actual number of Reed-Solomon
+       redundancy bytes per codeword used in the latency path in which
+       the bearer channel is transported.  The value is coded in bytes.
+       It ranges from 0 to 16.
+       The value 0 indicates no Reed-Solomon coding."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.6.1 (NFEC)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 7 }
+
+xdsl2ChStatusRFec  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16)
+   UNITS       "bits"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual number of Reed-Solomon redundancy bytes.
+
+       This parameter reports the actual number of Reed-Solomon
+       redundancy bytes per codeword used in the latency path in which
+       the bearer channel is transported.  The value is coded in bytes.
+       It ranges from 0 to 16.
+       The value 0 indicates no Reed-Solomon coding."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.6.2 (RFEC)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 8 }
+
+xdsl2ChStatusLSymb  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..65535)
+   UNITS       "bits"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual number of bits per symbol.
+       This parameter reports the actual number of bits per symbol
+       assigned to the latency path in which the bearer channel is
+       transported.  This value does not include trellis overhead.  The
+       value is coded in bits.
+       It ranges from 0 to 65535."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.6.3 (LSYMB)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 9 }
+
+xdsl2ChStatusIntlvDepth  OBJECT-TYPE
+   SYNTAX      Unsigned32(1..4096)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual interleaving depth.
+       This parameter reports the actual depth of the interleaver used
+       in the latency path in which the bearer channel is transported.
+       The value ranges from 1 to 4096 in steps of 1.
+       The value 1 indicates no interleaving."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.6.4 (INTLVDEPTH)"
+   DEFVAL       { 1 }
+   ::= { xdsl2ChannelStatusEntry 10 }
+
+xdsl2ChStatusIntlvBlock  OBJECT-TYPE
+   SYNTAX      Unsigned32(4..255)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual interleaving block length.
+       This parameter reports the actual block length of the interleaver
+       used in the latency path in which the bearer channel is
+       transported.
+
+       The value ranges from 4 to 255 in steps of 1."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)"
+   DEFVAL       { 4 }
+   ::= { xdsl2ChannelStatusEntry 11 }
+
+xdsl2ChStatusLPath  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..3)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Actual latency path.
+       This parameter reports the index of the actual latency path in
+       which the bearer is transported.
+       The valid values are 0, 1, 2 and 3.
+       For G.992.1, the FAST path shall be mapped to the latency
+       index 0, and the INTERLEAVED path shall be mapped to the latency
+       index 1."
+   REFERENCE    "ITU-T G.997.1 amendment 1, paragraph #7.5.2.7
+                 (LPATH)"
+   DEFVAL       { 0 }
+   ::= { xdsl2ChannelStatusEntry 12 }
+
+xdsl2ChStatusAtmStatus  OBJECT-TYPE
+   SYNTAX      Xdsl2ChAtmStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates current state (existing failures) of the DSL
+       channel in case its Data Path is ATM.  This is a bitmap of
+       possible conditions.
+       In case the channel is not of ATM Data Path, the object is set
+       to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.1.4
+                 (ATM data path failures)"
+   DEFVAL       { { noDefect } }
+   ::= { xdsl2ChannelStatusEntry 13 }
+
+xdsl2ChStatusPtmStatus  OBJECT-TYPE
+   SYNTAX      Xdsl2ChPtmStatus
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Indicates current state (existing failures) of the DSL
+       channel in case its Data Path is PTM (Packet Transfer Mode).
+       This is a bitmap of possible conditions.
+      In case the channel is not of PTM Data Path, the object is set
+      to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.1.5
+
+                 (PTM Data Path failures)"
+   DEFVAL       { { noDefect } }
+   ::= { xdsl2ChannelStatusEntry 14 }
+
+------------------------------------------------
+--    Scalars that relate to the SC Status Tables
+------------------------------------------------
+
+xdsl2ScalarSCMaxInterfaces  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This value determines the maximum number of
+       interfaces supported by xdsl2SCStatusTable,
+       xdsl2SCStatusBandTable, and xdsl2SCStatusSegmentTable."
+   ::= { xdsl2ScalarSC 1 }
+
+xdsl2ScalarSCAvailInterfaces  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This value determines the currently available number of
+       interfaces listed in xdsl2SCStatusTable,
+       xdsl2SCStatusBandTable, and xdsl2SCStatusSegmentTable."
+   ::= { xdsl2ScalarSC 2 }
+
+------------------------------------------------
+--        xdsl2SCStatusTable                  --
+------------------------------------------------
+
+xdsl2SCStatusTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2SCStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2SCStatusTable contains
+       status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that
+       provide information about the size of parameters in
+       xdsl2SCStatusSegmentTable.
+       The parameters in this table MUST be updated after a loop
+       diagnostic procedure, MAY be updated after a line
+       initialization, and MAY be updated at Showtime."
+   ::= { xdsl2Status 3 }
+
+xdsl2SCStatusEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2SCStatusEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+        interface has an ifType of vdsl2(251).  A second index of this
+        table is the transmission direction."
+   INDEX  { ifIndex, xdsl2SCStatusDirection }
+   ::= { xdsl2SCStatusTable 1 }
+
+Xdsl2SCStatusEntry  ::=
+   SEQUENCE {
+      xdsl2SCStatusDirection         Xdsl2Direction,
+      xdsl2SCStatusLinScale          Unsigned32,
+      xdsl2SCStatusLinScGroupSize    Unsigned32,
+      xdsl2SCStatusLogMt             Unsigned32,
+      xdsl2SCStatusLogScGroupSize    Unsigned32,
+      xdsl2SCStatusQlnMt             Unsigned32,
+      xdsl2SCStatusQlnScGroupSize    Unsigned32,
+      xdsl2SCStatusSnrMtime          Unsigned32,
+      xdsl2SCStatusSnrScGroupSize    Unsigned32,
+      xdsl2SCStatusAttainableRate    Unsigned32,
+      xdsl2SCStatusRowStatus         RowStatus
+   }
+
+xdsl2SCStatusDirection  OBJECT-TYPE
+     SYNTAX      Xdsl2Direction
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "The direction of the subcarrier either
+      upstream or downstream."
+     ::= { xdsl2SCStatusEntry 1 }
+
+xdsl2SCStatusLinScale  OBJECT-TYPE
+     SYNTAX      Unsigned32 (1..65535)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The scale factor to be applied to the H(f) linear
+      representation values for the respective transmission direction.
+      This parameter is only available after a loop diagnostic
+      procedure.  It is represented as an unsigned integer in the range
+      from 1 to 2^16-1."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.1 (HLINSCds)
+               and paragraph #7.5.1.26.7 (HLINSCus)"
+     ::= { xdsl2SCStatusEntry 2 }
+
+xdsl2SCStatusLinScGroupSize OBJECT-TYPE
+     SYNTAX      Unsigned32(1 | 2 | 4 | 8)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "Number of subcarriers per group used to report the H(f)
+      linear representation values for the respective transmission
+      direction.  The valid values are 1, 2, 4, and 8.  For ADSL, this
+      parameter is equal to one and, for VDSL2, it is equal to the size
+      of a subcarrier group used to compute these parameters.
+      This parameter is only available after a loop diagnostic
+      procedure."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds)
+               and paragraph #7.5.1.26.8 (HLINGus)"
+     ::= { xdsl2SCStatusEntry 3 }
+
+xdsl2SCStatusLogMt  OBJECT-TYPE
+     SYNTAX      Unsigned32 (1..65535)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "This parameter contains the number of symbols used to
+      measure the Hlog(f) values.  It is represented as an unsigned
+      integer in the range from 1 to 2^16-1.
+      After a loop diagnostic procedure, this parameter shall contain
+      the number of symbols used to measure the Hlog(f).  It should
+      correspond to the value specified in the Recommendation (e.g., the
+      number of symbols in 1 s time interval for ITU-T Recommendation.
+      G.992.3)."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds)
+               and paragraph #7.5.1.26.10 (HLOGMTus)"
+     ::= { xdsl2SCStatusEntry 4 }
+
+xdsl2SCStatusLogScGroupSize OBJECT-TYPE
+     SYNTAX      Unsigned32(1 | 2 | 4 | 8)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "Number of subcarriers per group used to report the H(f)
+      logarithmic representation values for the respective
+      transmission direction.  The valid values are 1, 2, 4, and 8.
+      For ADSL, this parameter is equal to 1, and for VDSL2, it is
+      equal to the size of a subcarrier group used to compute these
+      parameters."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.5 (HLOGGds)
+               and paragraph #7.5.1.26.11 (HLOGGus)"
+     ::= { xdsl2SCStatusEntry 5 }
+
+xdsl2SCStatusQlnMt  OBJECT-TYPE
+     SYNTAX      Unsigned32 (1..65535)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "This parameter contains the number of symbols used to
+      measure the QLN(f) values.  It is an unsigned integer in the range
+      from 1 to 2^16-1.  After a loop diagnostic procedure, this
+      parameter shall contain the number of symbols used to measure the
+      QLN(f).  It should correspond to the value specified in the
+      Recommendation (e.g., the number of symbols in 1 s time interval
+      for ITU-T Recommendation G.992.3)."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.27.1 (QLNMTds)
+               and paragraph #7.5.1.27.4 (QLNMTus)"
+     ::= { xdsl2SCStatusEntry 6 }
+
+xdsl2SCStatusQlnScGroupSize OBJECT-TYPE
+     SYNTAX      Unsigned32(1 | 2 | 4 | 8)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "Number of subcarriers per group used to report the Quiet
+      Line Noise values for the respective transmission direction.
+      The valid values are 1, 2, 4, and 8.
+      For ADSL, this parameter is equal to 1, and for VDSL2, it is
+      equal to the size of a subcarrier group used to compute these
+      parameters."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.27.2 (QLNGds)
+               and paragraph #7.5.1.27.5 (QLNGus)"
+     ::= { xdsl2SCStatusEntry 7 }
+
+xdsl2SCStatusSnrMtime  OBJECT-TYPE
+     SYNTAX      Unsigned32 (1..65535)
+     UNITS       "symbols"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "This parameter contains the number of symbols used to measure
+      the SNR(f) values.  It is an unsigned integer in the range from 1
+      to 2^16-1.  After a loop diagnostic procedure, this parameter
+      shall contain the number of symbols used to measure the SNR(f).
+      It should correspond to the value specified in the Recommendation
+      (e.g., the number of symbols in 1 s time interval for ITU-T
+      Recommendation G.992.3)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.28.1 (SNRMTds)
+                 and paragraph #7.5.1.28.4 (SNRMTus)"
+     ::= { xdsl2SCStatusEntry 8 }
+
+xdsl2SCStatusSnrScGroupSize OBJECT-TYPE
+     SYNTAX      Unsigned32(1 | 2 | 4 | 8)
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "Number of subcarriers per group used to report the SNR values
+      on the respective transmission direction.
+      The valid values are 1, 2, 4, and 8.
+      For ADSL, this parameter is equal to 1, and for VDSL2, it is
+      equal to the size of a subcarrier group used to compute these
+      parameters."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.28.2 (SNRGds)
+               and paragraph #7.5.1.28.5 (SNRGus)"
+     ::= { xdsl2SCStatusEntry 9 }
+
+xdsl2SCStatusAttainableRate  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Maximum Attainable Data Rate.  The maximum net data rate
+       currently attainable by the xTU-C transmitter and xTU-R receiver
+       (when referring to downstream direction) or by the xTU-R
+       transmitter and xTU-C receiver (when referring to upstream
+       direction).  Value is coded in bits/s.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once the DELT
+       process is over, the parameter no longer changes until the row is
+       deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.19 (ATTNDRds)
+               and paragraph #7.5.1.20 (ATTNDRus)"
+   ::= { xdsl2SCStatusEntry 10 }
+
+xdsl2SCStatusRowStatus  OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-write
+     STATUS      current
+     DESCRIPTION
+     "Row Status.  The SNMP agent will create a row in this table
+      for storing the results of a DELT performed on the associated
+      line, if the row does not already exist.
+
+      When a row is created in this table, the SNMP agent should also
+      create corresponding rows in the tables xdsl2SCStatusBandTable and
+      xdsl2SCStatusSegmentTable.
+
+      The SNMP manager is not permitted to create rows in this table or
+      set the row status to 'notInService'.  In the first case,
+      if the SNMP manager tries to create a new row, the SNMP agent
+      responds with the value 'noCreation' in the error status
+      field of the response-PDU.  In the latter case the SNMP agent
+      responds with the value 'wrongValue' in the error status
+      field of the response-PDU.
+
+      When a row is deleted in this table, the SNMP agent should also
+      delete corresponding rows in the tables xdsl2SCStatusBandTable and
+      xdsl2SCStatusSegmentTable.
+
+      The SNMP agent may have limited resources; therefore, if multiple
+      rows coexist in this table, it may fail to add new rows to this
+      table or allocate memory resources for a new DELT process.  If
+      that occurs, the SNMP agent responds with either the value
+      'tableFull' or the value 'noResources' (for
+      the xdsl2LineCmndConfLdsfFailReason object in xdsl2LineTable).
+
+      The management system (the operator) may delete rows from this
+      table according to any scheme.  For example, after retrieving the
+      results."
+     ::= { xdsl2SCStatusEntry 11 }
+
+------------------------------------------------
+--        xdsl2SCStatusBandTable              --
+------------------------------------------------
+
+xdsl2SCStatusBandTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2SCStatusBandEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2SCStatusBandTable contains subcarrier status
+       parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-
+       band.
+       For ADSL/ADSL2/ADSL2+, there is a single upstream band and a
+       single downstream band.  For VDSL2, there are several downstream
+       bands and several upstream bands.
+       The parameters in this table are only available after a loop
+       diagnostic procedure."
+   ::= { xdsl2Status 4 }
+
+xdsl2SCStatusBandEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2SCStatusBandEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+       interface
+
+       has an ifType of vdsl2(251).  A second index of this table is the
+       transmission band."
+   INDEX  { ifIndex, xdsl2SCStatusBand }
+   ::= { xdsl2SCStatusBandTable 1 }
+
+Xdsl2SCStatusBandEntry  ::=
+   SEQUENCE {
+      xdsl2SCStatusBand                  Xdsl2Band,
+      xdsl2SCStatusBandLnAtten           Unsigned32,
+      xdsl2SCStatusBandSigAtten          Unsigned32
+   }
+
+xdsl2SCStatusBand OBJECT-TYPE
+     SYNTAX      Xdsl2Band
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "The transmission band."
+     ::= { xdsl2SCStatusBandEntry 1 }
+
+xdsl2SCStatusBandLnAtten  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "When referring to a band in the downstream direction, it is
+       the measured difference in the total power transmitted by the
+       xTU-C and the total power received by the xTU-R over all
+       subcarriers during diagnostics mode.
+       When referring to a band in the upstream direction, it is the
+       measured difference in the total power transmitted by the xTU-R
+       and the total power received by the xTU-C over all subcarriers
+       during diagnostics mode.
+       It ranges from 0 to 1270 units of 0.1 dB (physical values are 0
+       to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is unavailable.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once the DELT
+       process is over, the parameter no longer changes until the row is
+       deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
+               and paragraph #7.5.1.10 (LATNus)"
+   DEFVAL       { 2147483646 }
+   ::= { xdsl2SCStatusBandEntry 2 }
+
+xdsl2SCStatusBandSigAtten  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1270 | 2147483646 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "When referring to a band in the downstream direction, it is the
+       measured difference in the total power transmitted by the xTU-C
+       and the total power received by the xTU-R over all subcarriers
+       during Showtime after the diagnostics mode.
+       When referring to the upstream direction, it is the measured
+       difference in the total power transmitted by the xTU-R and the
+       total power received by the xTU-C over all subcarriers during
+       Showtime after the diagnostics mode.
+       It ranges from 0 to 1270 units of 0.1 dB (physical values are 0
+       to 127 dB).
+       A special value of 0x7FFFFFFF (2147483647) indicates the line
+       attenuation is out of range to be represented.
+       A special value of 0x7FFFFFFE (2147483646) indicates the line
+       attenuation measurement is unavailable.
+       This object reflects the value of the parameter following the
+       most recent DELT performed on the associated line.  Once the DELT
+       process is over, the parameter no longer changes until the row is
+       deleted or a new DELT process is initiated."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
+               and paragraph #7.5.1.12 (SATNus)"
+   DEFVAL       { 2147483646 }
+   ::= { xdsl2SCStatusBandEntry 3 }
+
+------------------------------------------------
+--        xdsl2SCStatusSegmentTable           --
+------------------------------------------------
+
+xdsl2SCStatusSegmentTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2SCStatusSegmentEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2SCStatusSegmentTable contains status
+       parameters of VDSL2/ADSL/ADSL2 and ADSL2+ subcarriers.
+
+       Several objects in the table refer to NSus and NSds.  For
+       G.993.2, the value of NSus and NSds are, respectively, the
+       indices of the highest supported upstream and downstream
+       subcarriers according to the selected implementation profile.
+       For ADSL, NSus is equal to NSCus-1 and NSds is equal to NSCds-1.
+
+       The parameters in this table MUST be updated after a loop
+
+       diagnostic procedure and MAY be updated after a line
+       initialization and MAY be updated at Showtime."
+   ::= { xdsl2Status 5 }
+
+xdsl2SCStatusSegmentEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2SCStatusSegmentEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "One index of this table is an interface index where the
+       interface has an ifType of vdsl2(251).  A second index of this
+       table is the transmission direction.  A third index identifies
+       the specific segment of the subcarriers status addressed."
+   INDEX  { ifIndex,
+            xdsl2SCStatusDirection,
+            xdsl2SCStatusSegment   }
+   ::= { xdsl2SCStatusSegmentTable 1 }
+
+Xdsl2SCStatusSegmentEntry  ::=
+   SEQUENCE {
+      xdsl2SCStatusSegment                  Unsigned32,
+      xdsl2SCStatusSegmentLinReal           OCTET STRING,
+      xdsl2SCStatusSegmentLinImg            OCTET STRING,
+      xdsl2SCStatusSegmentLog               OCTET STRING,
+      xdsl2SCStatusSegmentQln               OCTET STRING,
+      xdsl2SCStatusSegmentSnr               OCTET STRING,
+      xdsl2SCStatusSegmentBitsAlloc         Xdsl2BitsAlloc,
+      xdsl2SCStatusSegmentGainAlloc         OCTET STRING
+   }
+
+xdsl2SCStatusSegment  OBJECT-TYPE
+     SYNTAX      Unsigned32(1..8)
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "The segment of the subcarriers status information provided by
+      this row.
+      Several status parameters in this table are retrieved in segments.
+      The first segment of the status information is retrieved with
+      xdsl2SCStatusSegment=1, the second segment is retrieved with
+      xdsl2SCStatusSegment=2, and so on.  When any status parameter is
+      retrieved in n segments where n<8), then for that parameter,
+      GET operations for the remaining segment numbers (n+1 to 8) will
+      respond with a zero-length OCTET STRING."
+     ::= { xdsl2SCStatusSegmentEntry 1 }
+
+xdsl2SCStatusSegmentLinReal  OBJECT-TYPE
+     SYNTAX      OCTET STRING  (SIZE(0..1024))
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "An array of up to 512 complex H(f) linear representation
+      values in linear scale for the respective transmission direction.
+      It is designed to support up to 512 (downstream) subcarrier
+      groups and can be retrieved in a single segment.
+      The number of utilized values in the downstream direction depends
+      on NSds; in the upstream direction, it depends on NSus.  This
+      value is referred to here as NS.
+      Each array entry represents the real component (referred to here
+      as a(i)) of Hlin(f = i*Df) value for a particular subcarrier
+      group index i (0 <= i <= NS).
+      Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
+      where scale is xdsl2SCStatusLinScale and a(i) and b(i)
+      (provided by the xdsl2SCStatusSegmentLinImg object) are in the
+      range (-2^15+1) to (+2^15-1).
+      A special value a(i)=b(i)= -2^15 indicates that no measurement
+      could be done for the subcarrier group because it is out of the
+      passband or that the attenuation is out of range to be
+      represented.  This parameter is only available after a loop
+      diagnostic procedure.
+      Each value in this array is 16 bits wide and is stored in big
+      endian format."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
+               and paragraph #7.5.1.26.9 (HLINpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 2 }
+
+xdsl2SCStatusSegmentLinImg  OBJECT-TYPE
+     SYNTAX      OCTET STRING  (SIZE(0..1024))
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "An array of up to 512 complex H(f) linear representation
+      values in linear scale for the respective transmission direction.
+      It is designed to support up to 512 (downstream) subcarrier
+      groups and can be retrieved in a single segment.
+      The number of utilized values in the downstream direction depends
+      on NSds; in the upstream direction, it depends on NSus.  This
+      value is referred to here as NS.
+      Each array entry represents the imaginary component (referred to
+      here as b(i)) of Hlin(f = i*Df) value for a particular
+      subcarrier group index i (0 <= i <= NS).
+      Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
+      where scale is xdsl2SCStatusLinScale and a(i) (provided by the
+      xdsl2SCStatusSegmentLinReal object) and b(i) are in the range
+      (-2^15+1) to (+2^15-1).
+      A special value a(i)=b(i)= -2^15 indicates that no measurement
+
+      could be done for the subcarrier group because it is out of the
+      passband or that the attenuation is out of range to be
+      represented.  This parameter is only available after a loop
+      diagnostic procedure.
+      Each value in this array is 16 bits wide and is stored in big
+      endian format."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
+               and paragraph #7.5.1.26.9 (HLINpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 3 }
+
+xdsl2SCStatusSegmentLog  OBJECT-TYPE
+     SYNTAX      OCTET STRING  (SIZE(0..1024))
+     UNITS       "dB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "An array of up to 512 real H(f) logarithmic representation
+      values in dB for the respective transmission direction.  It is
+      designed to support up to 512 (downstream) subcarrier groups
+      and can be retrieved in a single segment.
+      The number of utilized values in the downstream direction depends
+      on NSds; in the upstream direction, it depends on NSus.  This
+      value is referred to here as NS.
+      Each array entry represents the real Hlog(f = i*Df) value for a
+      particular subcarrier group index i, (0 <= i <= NS).
+      The real Hlog(f) value is represented as (6-m(i)/10), with m(i)
+      in the range 0 to 1022.  A special value m=1023 indicates that
+      no measurement could be done for the subcarrier group because
+      it is out of the passband or that the attenuation is out of
+      range to be represented.  This parameter is applicable in loop
+      diagnostic procedure and initialization.
+      Each value in this array is 16 bits wide and is stored in big
+      endian format."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.26.6 (HLOGpsds)
+               and paragraph #7.5.1.26.12 (HLOGpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 4 }
+
+xdsl2SCStatusSegmentQln  OBJECT-TYPE
+     SYNTAX      OCTET STRING  (SIZE(0..512))
+     UNITS       "dBm/Hz"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "An array of up to 512 real Quiet Line Noise values in dBm/Hz
+      for the respective transmission direction.  It is designed for up
+      to 512 (downstream) subcarrier groups and can be retrieved in a
+      single segment.
+      The number of utilized values in the downstream direction depends
+
+      on NSds; in the upstream direction, it depends on NSus.  This
+      value is referred to here as NS.
+      Each array entry represents the QLN(f = i*Df) value for a
+      particular subcarrier index i, (0 <= i <= NS).
+      The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range
+      0 to 254.  A special value n(i)=255 indicates that no measurement
+      could be done for the subcarrier group because it is out of the
+      passband or that the noise PSD is out of range to be represented.
+      This parameter is applicable in loop diagnostic procedure and
+      initialization.  Each value in this array is 8 bits wide."
+   REFERENCE  "ITU-T G.997.1, paragraph #7.5.1.27.3 (QLNpsds)
+               and paragraph #7.5.1.27.6 (QLNpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 5 }
+
+xdsl2SCStatusSegmentSnr  OBJECT-TYPE
+     SYNTAX      OCTET STRING  (SIZE(0..512))
+     UNITS       "0.5 dB"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The SNR Margin per subcarrier group, expressing the ratio
+      between the received signal power and received noise power per
+      subscriber group.  It is an array of 512 octets, designed for
+      supporting up to 512 (downstream) subcarrier groups and can be
+      retrieved in a single segment.
+      The number of utilized octets in the downstream direction depends
+      on NSds; in the upstream direction, it depends on NSus.  This
+      value is referred to here as NS.
+      Octet i (0 <= i <= NS) is set to a value in the range 0 to
+      254 to indicate that the respective downstream or upstream
+      subcarrier group i has an SNR of:
+      (-32 + xdsl2SCStatusSegmentSnr(i)/2) in dB (i.e., -32 to 95 dB).
+      The special value 255 means that no measurement could be done for
+      the subcarrier group because it is out of the PSD mask passband or
+      that the noise PSD is out of range to be represented.  Each value
+      in this array is 8 bits wide."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.28.3 (SNRpsds)
+                 and paragraph #7.5.1.28.6 (SNRpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 6 }
+
+xdsl2SCStatusSegmentBitsAlloc  OBJECT-TYPE
+     SYNTAX      Xdsl2BitsAlloc
+     UNITS       "bits"
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The bits allocation per subcarrier.  An array of 256 octets
+      (512 nibbles) designed for supporting up to 512 (downstream)
+
+      subcarriers.  When more than 512 subcarriers are supported, the
+      status information is reported through multiple (up to 8)
+      segments.  The first segment is then used for the first 512
+      subcarriers.  The second segment is used for the subcarriers
+      512 to 1023 and so on.
+      The aggregate number of utilized nibbles in the downstream
+      direction (in all segments) depends on NSds; in the upstream
+      direction, it depends on NSus.
+      This value is referred to here as NS.  The segment number is in
+      xdsl2SCStatusSegment.
+      Nibble i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
+      segment is set to a value in the range 0 to 15 to indicate that
+      the respective downstream or upstream subcarrier j
+      (j=(segement-1)*512+i) has the same amount of bits
+      allocation."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
+                 and paragraph #7.5.1.29.2 (BITSpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 7 }
+
+xdsl2SCStatusSegmentGainAlloc  OBJECT-TYPE
+     SYNTAX      OCTET STRING  (SIZE(0..1024))
+     MAX-ACCESS  read-only
+     STATUS      current
+     DESCRIPTION
+     "The gain allocation per subcarrier.  An array of 512 16-bit
+      values, designed for supporting up to 512 (downstream)
+      subcarriers.  When more then 512 subcarriers are supported, the
+      status information is reported through multiple (up to 8)
+      segments.  The first segment is then used for the first 512
+      subcarriers.  The second segment is used for the subcarriers 512
+      to 1023 and so on.
+      The aggregate number of utilized octets in the downstream
+      direction depends on NSds; in the upstream direction, it depends
+      on NSus.  This value is referred to here as NS.  The segment
+      number is in xdsl2SCStatusSegment.
+      Value i (0 <= i < MIN((NS+1)-(segment-1)*512,512)) in each
+      segment is set to a value in the range 0 to 4093 to indicate that
+      the respective downstream or upstream subcarrier j
+      (j=(segement-1)*512+i) has the same amount of gain value.
+      The gain value is represented as a multiple of 1/512 on a linear
+      scale.  Each value in this array is 16 bits wide and is stored in
+      big endian format."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.5.1.29.3 (GAINSpsds)
+                 and paragraph #7.5.1.29.4 (GAINSpsus)"
+     ::= { xdsl2SCStatusSegmentEntry 8 }
+
+------------------------------------------------
+--        xdsl2LineInventoryTable             --
+
+------------------------------------------------
+
+xdsl2LineInventoryTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineInventoryEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineInventoryTable contains an inventory of the
+       DSL termination unit."
+   ::= { xdsl2Inventory 1 }
+
+xdsl2LineInventoryEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineInventoryEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+       interface
+       has an ifType of vdsl2(251).  A second index of this table is the
+       termination unit."
+   INDEX  { ifIndex, xdsl2LInvUnit }
+   ::= { xdsl2LineInventoryTable 1 }
+
+Xdsl2LineInventoryEntry  ::=
+   SEQUENCE {
+      xdsl2LInvUnit                      Xdsl2Unit,
+      xdsl2LInvG994VendorId              OCTET STRING,
+      xdsl2LInvSystemVendorId            OCTET STRING,
+      xdsl2LInvVersionNumber             OCTET STRING,
+      xdsl2LInvSerialNumber              OCTET STRING,
+      xdsl2LInvSelfTestResult            Unsigned32,
+      xdsl2LInvTransmissionCapabilities  Xdsl2TransmissionModeType
+   }
+
+xdsl2LInvUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { xdsl2LineInventoryEntry 1 }
+
+xdsl2LInvG994VendorId  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(8))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ADSL Transceiver Unit (ATU) G.994.1 Vendor ID as
+
+       inserted in the G.994.1 CL/CLR message.
+       It consists of 8 binary octets, including a country
+       code followed by a (regionally allocated) provider code, as
+       defined in Recommendation T.35."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.4.1-7.4.2"
+   ::= { xdsl2LineInventoryEntry 2 }
+
+xdsl2LInvSystemVendorId  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(8))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The ATU System Vendor ID (identifies the xTU system
+       integrator) as inserted in the Overhead Messages (both xTUs for
+       G.992.3, G.992.4, G.992.5, and G.993.2) or in the Embedded
+       Operations Channel (xTU-R in G.992.1 and G.992.2).
+       It consists of 8 binary octets, with same format as used for
+       Xdsl2InvG994VendorId."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.4.3-7.4.4"
+   ::= { xdsl2LineInventoryEntry 3 }
+
+xdsl2LInvVersionNumber  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..16))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The xTU version number (vendor-specific information) as
+       inserted in the Overhead Messages (both xTUs for G.992.3,
+       G.992.4, G.992.5, and G.993.2) or in the Embedded Operations
+       Channel (xTU-R in G.992.1 and G.992.2).  It consists of up to 16
+       binary octets."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.4.5-7.4.6"
+   ::= { xdsl2LineInventoryEntry 4 }
+
+xdsl2LInvSerialNumber  OBJECT-TYPE
+   SYNTAX      OCTET STRING  (SIZE(0..32))
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The xTU serial number (vendor-specific information) as
+       inserted in the Overhead Messages (both xTUs for G.992.3,
+       G.992.4, G.992.5, and G.993.2) or in the Embedded Operations
+       Channel (xTU-R in G.992.1 and G.992.2).  It is vendor-specific
+       information consisting of up to 32 ASCII characters."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.4.7-7.4.8"
+   ::= { xdsl2LineInventoryEntry 5 }
+
+xdsl2LInvSelfTestResult  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The xTU self-test result, coded as a 32-bit value.  The
+       most significant octet of the result is '0' if the
+       self-test passed, and '1' if the self-test failed.  The
+       interpretation of the other octets is vendor discretionary."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.4.9-7.4.10"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineInventoryEntry 6 }
+
+xdsl2LInvTransmissionCapabilities  OBJECT-TYPE
+   SYNTAX      Xdsl2TransmissionModeType
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The xTU transmission system capability list of the different
+       coding types.  It is coded in a bitmap representation with 1 or
+       more bits set.  A bit set to '1' means that the xTU
+       supports the respective coding.  The value may be derived from
+       the handshaking procedures defined in G.994.1.  A set of xDSL
+       line transmission modes, with one bit per mode."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.4.11-7.4.12"
+   ::= { xdsl2LineInventoryEntry 7 }
+
+------------------------------------------------
+--        xdsl2LineConfTemplateTable          --
+------------------------------------------------
+
+xdsl2LineConfTemplateTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineConfTemplateTable contains VDSL2/ADSL/
+       ADSL2 and ADSL2+ line configuration templates.
+
+       Note that this table is also used to configure the number of
+       bearer channels.
+       When the number of bearer channels is increased, the SNMP agent
+       SHOULD create rows in all tables indexed by a channel index.
+       When the number of bearer channels is decreased, the SNMP agent
+       SHOULD delete rows in all tables indexed by a channel index.
+       For example, if the value of xdsl2LConfTempChan4ConfProfile is
+       set to a non-null value, then rows SHOULD be created in
+       xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other tables
+       indexed by a channel index.
+
+       For example, if the value of xdsl2LConfTempChan2ConfProfile is
+       set to a null value, then rows SHOULD be deleted in
+       xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other
+       tables indexed by a channel index.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+   ::= { xdsl2ProfileLine 1 }
+
+xdsl2LineConfTemplateEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "A default template with an index of 'DEFVAL' will always
+       exist, and its parameters will be set to vendor-specific values,
+       unless otherwise specified in this document."
+   INDEX  { xdsl2LConfTempTemplateName }
+   ::= { xdsl2LineConfTemplateTable 1 }
+
+Xdsl2LineConfTemplateEntry  ::=
+   SEQUENCE {
+      xdsl2LConfTempTemplateName      SnmpAdminString,
+      xdsl2LConfTempLineProfile       SnmpAdminString,
+      xdsl2LConfTempChan1ConfProfile  SnmpAdminString,
+      xdsl2LConfTempChan1RaRatioDs    Unsigned32,
+      xdsl2LConfTempChan1RaRatioUs    Unsigned32,
+      xdsl2LConfTempChan2ConfProfile  SnmpAdminString,
+      xdsl2LConfTempChan2RaRatioDs    Unsigned32,
+      xdsl2LConfTempChan2RaRatioUs    Unsigned32,
+      xdsl2LConfTempChan3ConfProfile  SnmpAdminString,
+      xdsl2LConfTempChan3RaRatioDs    Unsigned32,
+      xdsl2LConfTempChan3RaRatioUs    Unsigned32,
+      xdsl2LConfTempChan4ConfProfile  SnmpAdminString,
+      xdsl2LConfTempChan4RaRatioDs    Unsigned32,
+      xdsl2LConfTempChan4RaRatioUs    Unsigned32,
+      xdsl2LConfTempRowStatus         RowStatus
+   }
+
+xdsl2LConfTempTemplateName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+   REFERENCE    "DSL Forum TR-129, paragraph #5.4"
+   ::= { xdsl2LineConfTemplateEntry 1 }
+
+xdsl2LConfTempLineProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the
+       VDSL2/ADSL/ADSL2 and ADSL2+ line configuration Profile Table
+       (xdsl2LineConfProfTable) that applies for this DSL line."
+   REFERENCE    "DSL Forum TR-129, paragraph #5.4"
+   DEFVAL       { "DEFVAL" }
+   ::= { xdsl2LineConfTemplateEntry 2 }
+
+xdsl2LConfTempChan1ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the VDSL2/
+       ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+       (xdsl2ChConfProfileTable) that applies to DSL bearer channel #1.
+       The channel profile name specified here MUST match the name of an
+       existing row in the xdsl2ChConfProfileTable table."
+   DEFVAL       { "DEFVAL" }
+   ::= { xdsl2LineConfTemplateEntry 3 }
+
+xdsl2LConfTempChan1RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #1 when performing rate
+       adaptation on Downstream.  The ratio refers to the available data
+       rate in excess of the Minimum Data Rate, summed over all bearer
+       channels.
+       Also, the 100 - xdsl2LConfTempChan1RaRatioDs is the ratio of
+       excess data rate to be assigned to all other bearer channels on
+       Downstream direction.  The sum of rate adaptation ratios over all
+       bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                (Rate adaptation ratio)"
+   DEFVAL       { 100 }
+   ::= { xdsl2LineConfTemplateEntry 4 }
+
+xdsl2LConfTempChan1RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #1 when performing
+       rate adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.
+       Also, the 100 - xdsl2LConfTempChan1RaRatioUs is the ratio of
+       excess data rate to be assigned to all other bearer channels on
+       Upstream direction.  The sum of rate adaptation ratios over all
+       bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 100 }
+   ::= { xdsl2LineConfTemplateEntry 5 }
+
+xdsl2LConfTempChan2ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the VDSL2/
+       ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+       (xdsl2ChConfProfileTable) that applies to DSL bearer channel #2.
+       If the channel is unused, then the object is set to a zero-length
+       string.
+       This object may be set to a zero-length string only if
+       xdsl2LConfTempChan3ConfProfile contains a zero-length
+       string."
+   DEFVAL       { "" }
+   ::= { xdsl2LineConfTemplateEntry 6 }
+
+xdsl2LConfTempChan2RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #2 when performing
+       rate adaptation on Downstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.
+       Also, the 100 - xdsl2LConfTempChan2RaRatioDs is the ratio of
+       excess data rate to be assigned to all other bearer channels on
+       Downstream direction.  The sum of rate adaptation ratios over all
+       bearers on the same direction shall be equal to
+
+       100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineConfTemplateEntry 7 }
+
+xdsl2LConfTempChan2RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #2 when performing
+       rate adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.
+       Also, the 100 - xdsl2LConfTempChan2RaRatioUs is the ratio of
+       excess data rate to be assigned to all other bearer channels on
+       Upstream direction.  The sum of rate adaptation ratios over all
+       bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineConfTemplateEntry 8 }
+
+xdsl2LConfTempChan3ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the VDSL2/
+       ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+       (xdsl2ChConfProfileTable) that applies to DSL bearer channel #3.
+       If the channel is unused, then the object is set to a zero-length
+       string.
+       This object may be set to a zero-length string only if
+       xdsl2LConfTempChan4ConfProfile contains a zero-length string.
+       This object may be set to a non-zero-length string only if
+       xdsl2LConfTempChan2ConfProfile contains a non-zero-length
+       string."
+   DEFVAL       { "" }
+   ::= { xdsl2LineConfTemplateEntry 9 }
+
+xdsl2LConfTempChan3RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #3 when performing
+       rate adaptation on Downstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.
+       Also, the 100 - xdsl2LConfTempChan3RaRatioDs is the ratio of
+       excess data rate to be assigned to all other bearer channels on
+       Downstream direction.  The sum of rate adaptation ratios over all
+       bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineConfTemplateEntry 10 }
+
+xdsl2LConfTempChan3RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #3 when performing
+       rate adaptation on Upstream.  The ratio refers to the available
+       data rate in excess of the Minimum Data Rate, summed over all
+       bearer channels.
+       Also, the 100 - xdsl2LConfTempChan3RaRatioUs is the ratio of
+       excess data rate to be assigned to all other bearer channels on
+       Upstream direction.  The sum of rate adaptation ratios over all
+       bearers on the same direction shall be equal to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineConfTemplateEntry 11 }
+
+xdsl2LConfTempChan4ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the VDSL2/
+       ADSL/ADSL2 and ADSL2+ channel configuration Profile Table
+       (xdsl2ChConfProfileTable) that applies to DSL bearer channel #4.
+       If the channel is unused, then the object is set to a zero-length
+       string.
+       This object may be set to a non-zero-length string only if
+       xdsl2LConfTempChan3ConfProfile contains a non-zero-length
+
+       string."
+   DEFVAL       { "" }
+   ::= { xdsl2LineConfTemplateEntry 12 }
+
+xdsl2LConfTempChan4RaRatioDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #4 when performing rate
+       adaptation on Downstream.  The ratio refers to the available data
+       rate in excess of the Minimum Data Rate, summed over all bearer
+       channels.
+       Also, the 100 - xdsl2LConfTempChan4RaRatioDs is the ratio of
+       excess data rate to be assigned to all other bearer channels.
+       The sum of rate adaptation ratios over all bearers on the same
+       direction shall sum to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineConfTemplateEntry 13 }
+
+xdsl2LConfTempChan4RaRatioUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..100)
+   UNITS       "percent"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Rate Adaptation Ratio.  The ratio (in percent) that should be
+       taken into account for the bearer channel #4 when performing rate
+       adaptation on Upstream.  The ratio refers to the available data
+       rate in excess of the Minimum Data Rate, summed over all bearer
+       channels.
+       Also, the 100 - xdsl2LConfTempChan4RaRatioUs is the ratio of
+       excess data rate to be assigned to all other bearer channels.
+       The sum of rate adaptation ratios over all bearers on the same
+       direction shall sum to 100%."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.4
+                 (Rate adaptation ratio)"
+   DEFVAL       { 0 }
+   ::= { xdsl2LineConfTemplateEntry 14 }
+
+xdsl2LConfTempRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+       A template is activated by setting this object to 'active'.
+       Before a profile can be deleted or taken out of service (by
+       setting this object to 'destroy' or 'notInService'), it MUST be
+       first unreferenced from all associated lines.
+       A row in this table is said to be unreferenced when there is no
+       instance of xdsl2LineConfTemplate or
+       xdsl2LineConfFallbackTemplate that refers to the row."
+   ::= { xdsl2LineConfTemplateEntry 15 }
+
+------------------------------------------
+--        xdsl2LineConfProfTable        --
+------------------------------------------
+
+xdsl2LineConfProfTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineConfProfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineConfProfTable contains VDSL2/ADSL/
+       ADSL2 and ADSL2+ line configuration profiles.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+   ::= { xdsl2ProfileLine 2 }
+
+xdsl2LineConfProfEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineConfProfEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "A default profile with an index of 'DEFVAL' will always
+      exist, and its parameters will be set to vendor-specific values,
+      unless otherwise specified in this document."
+   INDEX  { xdsl2LConfProfProfileName }
+   ::= { xdsl2LineConfProfTable 1 }
+
+Xdsl2LineConfProfEntry  ::=
+   SEQUENCE {
+      xdsl2LConfProfProfileName          SnmpAdminString,
+      xdsl2LConfProfScMaskDs             Xdsl2ScMaskDs,
+      xdsl2LConfProfScMaskUs             Xdsl2ScMaskUs,
+      xdsl2LConfProfVdsl2CarMask         Xdsl2CarMask,
+      xdsl2LConfProfRfiBands             Xdsl2RfiBands,
+      xdsl2LConfProfRaModeDs             Xdsl2RaMode,
+      xdsl2LConfProfRaModeUs             Xdsl2RaMode,
+      xdsl2LConfProfRaUsNrmDs            Unsigned32,
+      xdsl2LConfProfRaUsNrmUs            Unsigned32,
+      xdsl2LConfProfRaUsTimeDs           Unsigned32,
+      xdsl2LConfProfRaUsTimeUs           Unsigned32,
+      xdsl2LConfProfRaDsNrmDs            Unsigned32,
+      xdsl2LConfProfRaDsNrmUs            Unsigned32,
+      xdsl2LConfProfRaDsTimeDs           Unsigned32,
+      xdsl2LConfProfRaDsTimeUs           Unsigned32,
+      xdsl2LConfProfTargetSnrmDs         Unsigned32,
+      xdsl2LConfProfTargetSnrmUs         Unsigned32,
+      xdsl2LConfProfMaxSnrmDs            Unsigned32,
+      xdsl2LConfProfMaxSnrmUs            Unsigned32,
+      xdsl2LConfProfMinSnrmDs            Unsigned32,
+      xdsl2LConfProfMinSnrmUs            Unsigned32,
+      xdsl2LConfProfMsgMinUs             Unsigned32,
+      xdsl2LConfProfMsgMinDs             Unsigned32,
+      xdsl2LConfProfCeFlag               Xdsl2LineCeFlag,
+      xdsl2LConfProfSnrModeDs            Xdsl2LineSnrMode,
+      xdsl2LConfProfSnrModeUs            Xdsl2LineSnrMode,
+      xdsl2LConfProfTxRefVnDs            Xdsl2LineTxRefVnDs,
+      xdsl2LConfProfTxRefVnUs            Xdsl2LineTxRefVnUs,
+      xdsl2LConfProfXtuTransSysEna       Xdsl2TransmissionModeType,
+      xdsl2LConfProfPmMode               Xdsl2LinePmMode,
+      xdsl2LConfProfL0Time               Unsigned32,
+      xdsl2LConfProfL2Time               Unsigned32,
+      xdsl2LConfProfL2Atpr               Unsigned32,
+      xdsl2LConfProfL2Atprt              Unsigned32,
+      xdsl2LConfProfProfiles             Xdsl2LineProfiles,
+      xdsl2LConfProfDpboEPsd             Xdsl2PsdMaskDs,
+      xdsl2LConfProfDpboEsEL             Unsigned32,
+      xdsl2LConfProfDpboEsCableModelA    Unsigned32,
+      xdsl2LConfProfDpboEsCableModelB    Unsigned32,
+      xdsl2LConfProfDpboEsCableModelC    Unsigned32,
+      xdsl2LConfProfDpboMus              Unsigned32,
+      xdsl2LConfProfDpboFMin             Unsigned32,
+      xdsl2LConfProfDpboFMax             Unsigned32,
+      xdsl2LConfProfUpboKL               Unsigned32,
+      xdsl2LConfProfUpboKLF              Xdsl2UpboKLF,
+      xdsl2LConfProfUs0Mask              Xdsl2LineUs0Mask,
+      xdsl2LConfProfForceInp             TruthValue,
+      xdsl2LConfProfRowStatus            RowStatus
+   }
+
+xdsl2LConfProfProfileName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+     ::= { xdsl2LineConfProfEntry 1 }
+
+xdsl2LConfProfScMaskDs  OBJECT-TYPE
+   SYNTAX      Xdsl2ScMaskDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Subcarrier mask.  A bitmap of 4096 bits that allows masking
+       up to 4096 downstream subcarriers.  If bit i (0 <= i <
+       NSCds) is set to '1', the respective downstream
+       subcarrier is masked, and if set to '0', the respective
+       subcarrier is unmasked.
+       Note that there should always be unmasked subcarriers (i.e.,
+       this object cannot be all 1's).
+       Also note that if NSCds < 4096, all bits i
+       (NSCds < i <= 4096) should be set to '1'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.6 (CARMASKds)"
+   ::= { xdsl2LineConfProfEntry 2 }
+
+xdsl2LConfProfScMaskUs  OBJECT-TYPE
+   SYNTAX      Xdsl2ScMaskUs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Subcarrier mask.  A bitmap of 4096 bits that allows masking
+       up to 4096 upstream subcarriers.  If bit i (0 <= i < NSCus)
+       is set to '1', the respective upstream subcarrier is
+       masked, and if set to '0', the respective subcarrier
+       is unmasked.
+       Note that there should always be unmasked subcarriers (i.e.,
+       this object cannot be all 1's).
+       Also note that if NSCus < 4096, all bits i
+       (NSCus < i <= 4096) should be set to '1'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.7 (CARMASKus)"
+   ::= { xdsl2LineConfProfEntry 3 }
+
+xdsl2LConfProfVdsl2CarMask  OBJECT-TYPE
+   SYNTAX      Xdsl2CarMask
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "VDSL2-specific subcarrier mask.  This configuration
+       parameter defines the restrictions, additional to the band plan,
+       to determine the set of subcarriers allowed for transmission in
+       both the upstream and downstream directions.
+       The parameter shall describe the not masked subcarriers as one or
+       more frequency bands.  Each band is represented by start and stop
+
+       subcarrier indices with a subcarrier spacing of 4.3125 kHz.  The
+       valid range of subcarrier indices runs from 0 to at least the
+       index of the highest allowed subcarrier in both transmission
+       directions among all profiles enabled by the parameter
+       xdsl2LConfProfProfiles.
+       Up to 32 bands may be specified.  Other subcarriers shall be
+       masked."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.8 (VDSL2-
+                 CARMASK)"
+   ::= { xdsl2LineConfProfEntry 4 }
+
+xdsl2LConfProfRfiBands  OBJECT-TYPE
+   SYNTAX      Xdsl2RfiBands
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "For ITU-T Recommendation G.992.5, this configuration
+       parameter defines
+       the subset of downstream PSD mask breakpoints, as specified in
+       xdsl2LConfProfPsdMaskDs (PSDMASKds), that shall be used to notch
+       an RFI band.  This subset consists of pairs of consecutive
+       subcarrier indices belonging to breakpoints: [ti; ti + 1],
+       corresponding to the low level of the notch.
+       The specific interpolation around these points is defined in the
+       relevant Recommendations (e.g., ITU-T Recommendation G.992.5).
+       The CO-MIB shall define the RFI notches using breakpoints in
+       xdsl2LConfProfPsdMaskDs (PSDMASKds) as specified in the relevant
+       Recommendations (e.g., ITU-T Recommendation G.992.5).
+
+       For ITU-T Recommendation G.993.2, this configuration parameter
+       defines the bands where the PSD shall be reduced as
+       specified in #7.2.1.2/G.993.2.  Each band shall be represented
+       by a start and stop subcarrier indices with a subcarrier
+       spacing of 4.3125 kHz.  Up to 16 bands may be specified.
+       This parameter defines the RFI bands for both the upstream
+       and downstream directions."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.10 (RFIBANDS)"
+   ::= { xdsl2LineConfProfEntry 5 }
+
+xdsl2LConfProfRaModeDs  OBJECT-TYPE
+   SYNTAX      Xdsl2RaMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The mode of operation of a rate-adaptive xTU-C in the
+       transmit direction."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.4.1 (RA-MODEds)"
+   DEFVAL      { manual }
+   ::= { xdsl2LineConfProfEntry 6 }
+
+xdsl2LConfProfRaModeUs  OBJECT-TYPE
+   SYNTAX      Xdsl2RaMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The mode of operation of a rate-adaptive xTU-R in the
+       transmit direction."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.4.2 (RA-MODEus)"
+   DEFVAL      { manual }
+   ::= { xdsl2LineConfProfEntry 7 }
+
+xdsl2LConfProfRaUsNrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Up-Shift Noise Margin value, to be used when
+       xdsl2LConfProfRaModeDs is set to 'dynamicRa'.  If the downstream
+       noise margin is above this value, and stays above it,
+       for more than the time specified by the
+       xdsl2LConfProfRaUsTimeDs, the xTU-R shall attempt to increase
+       the downstream net data rate.  The Downstream Up-Shift Noise
+       Margin ranges from 0 to 310 units of 0.1 dB (physical values
+       are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.3 (RA-USNRMds)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 8 }
+
+xdsl2LConfProfRaUsNrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Up-Shift Noise Margin value, to be used when
+       xdsl2LConfProfRaModeUs is set to 'dynamicRa'.  If the upstream
+       noise margin is above this value, and stays above it,
+       for more than
+       the time specified by the xdsl2LConfProfRaUsTimeUs, the xTU-C
+       shall attempt to increase the upstream net data rate.
+       The Upstream Up-Shift Noise Margin ranges from 0 to 310 units of
+       0.1 dB (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.4 (RA-USNRMus)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 9 }
+
+xdsl2LConfProfRaUsTimeDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Up-Shift Time Interval, to be used when
+       xdsl2LConfProfRaModeDs is set to 'dynamicRa'.  The interval of
+       time that the downstream noise margin should stay above the
+       Downstream Up-Shift Noise Margin before the xTU-R shall attempt
+       to increase the downstream net data rate.  The time interval
+       ranges from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.5 (RA-UTIMEds)"
+   DEFVAL       { 3600 }
+   ::= { xdsl2LineConfProfEntry 10 }
+
+xdsl2LConfProfRaUsTimeUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Up-Shift Time Interval, to be used when
+       xdsl2LConfProfRaModeUs is set to 'dynamicRa'.  The interval of
+       time the upstream noise margin should stay above the Upstream
+       Up-Shift Noise Margin before the xTU-C shall attempt to increase
+       the upstream net data rate.  The time interval ranges from 0 to
+       16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.6 (RA-UTIMEus)"
+   DEFVAL       { 3600 }
+   ::= { xdsl2LineConfProfEntry 11 }
+
+xdsl2LConfProfRaDsNrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Down-Shift Noise Margin value, to be used
+       when xdsl2LConfProfRaModeDs is set to 'dynamicRa'.  If the
+       downstream noise margin is below this value and stays
+       below that value, for more than the time specified by the
+       xdsl2LConfProfRaDsTimeDs, the xTU-R shall attempt to decrease
+       the downstream net data rate.  The Downstream Down-Shift Noise
+       Margin ranges from 0 to 310 units of 0.1 dB (physical values
+       are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.7 (RA-DSNRMds)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 12 }
+
+xdsl2LConfProfRaDsNrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Downshift Noise Margin value, to be used when
+       xdsl2LConfProfRaModeUs is set to 'dynamicRa'.  If the upstream
+       noise margin is below this value and stays below that value,
+       for more than the time specified by the xdsl2LConfProfRaDsTimeUs,
+       the xTU-C shall attempt to decrease the upstream net data rate.
+       The Upstream Down-Shift Noise Margin ranges from 0 to 310 units
+       of 0.1 dB (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.8 (RA-DSNRMus)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 13 }
+
+xdsl2LConfProfRaDsTimeDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Downstream Downshift Time Interval, to be used when
+       xdsl2LConfProfRaModeDs is set to 'dynamicRa'.  The interval of
+       time the downstream noise margin should stay below the Downstream
+       Down-Shift Noise Margin before the xTU-R shall attempt to
+       decrease the downstream net data rate.  The time interval ranges
+       from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.9 (RA-DTIMEds)"
+   DEFVAL       { 3600 }
+   ::= { xdsl2LineConfProfEntry 14 }
+
+xdsl2LConfProfRaDsTimeUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..16383)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The Upstream Down-Shift Time Interval, to be used when
+       xdsl2LConfProfRaModeUs is set to 'dynamicRa'.  The interval of
+       time the upstream noise margin should stay below the Upstream
+       Down-Shift Noise Margin before the xTU-C shall attempt to
+       decrease the upstream net data rate.  The time interval ranges
+       from 0 to 16383 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.4.10 (RA-DTIMEus)"
+   DEFVAL       { 3600 }
+   ::= { xdsl2LineConfProfEntry 15 }
+
+xdsl2LConfProfTargetSnrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the xTU-R receiver shall achieve,
+       relative to the BER requirement for each of the downstream bearer
+       channels, to successfully complete initialization.
+       The target noise margin ranges from 0 to 310 units of 0.1 dB
+       (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.3.1 (TARSNRMds)"
+   DEFVAL       { 60 }
+   ::= { xdsl2LineConfProfEntry 16 }
+
+xdsl2LConfProfTargetSnrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the xTU-C receiver shall achieve,
+       relative to the BER requirement for each of the upstream bearer
+       channels, to successfully complete initialization.
+       The target noise margin ranges from 0 to 310 units of 0.1 dB
+       (physical values are 0 to 31 dB)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.3.2 (TARSNRMus)"
+   DEFVAL       { 60 }
+   ::= { xdsl2LineConfProfEntry 17 }
+
+xdsl2LConfProfMaxSnrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..310 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum Noise Margin the xTU-R receiver shall try to
+       sustain.  If the Noise Margin is above this level, the xTU-R
+       shall request that the xTU-C reduce the xTU-C transmit power to
+       get a noise margin below this limit (if this functionality is
+       supported).  The maximum noise margin ranges from 0 to 310 units
+       of 0.1 dB (physical values are 0 to 31 dB).  A value of
+       0x7FFFFFFF (2147483647) means that there is no maximum."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.3.3 (MAXSNRMds)"
+   DEFVAL       { 310 }
+   ::= { xdsl2LineConfProfEntry 18 }
+
+xdsl2LConfProfMaxSnrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..310 | 2147483647)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum Noise Margin the xTU-C receiver shall try to
+       sustain.  If the Noise Margin is above this level, the xTU-C
+       shall request that the xTU-R reduce the xTU-R transmit power to
+       get a noise margin below this limit (if this functionality is
+       supported).  The maximum noise margin ranges from 0 to 310 units
+       of 0.1 dB (physical values are 0 to 31 dB).  A value of
+       0x7FFFFFFF (2147483647) means that there is no maximum."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.3.4 (MAXSNRMus)"
+   DEFVAL       { 310 }
+   ::= { xdsl2LineConfProfEntry 19 }
+
+xdsl2LConfProfMinSnrmDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the xTU-R receiver shall tolerate.
+       If the noise margin falls below this level, the xTU-R shall
+       request that the xTU-C increase the xTU-C transmit power.
+       If an increase to xTU-C transmit power is not possible, a loss-
+       of-margin (LOM) defect occurs, the xTU-R shall fail and attempt
+       to reinitialize and the NMS shall be notified.  The minimum noise
+       margin ranges from 0 to 310 units of 0.1 dB (physical values are
+       0 to 31 dB).  A value of 0 means that there is no minimum."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.3.5 (MINSNRMds)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 20 }
+
+xdsl2LConfProfMinSnrmUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..310)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum Noise Margin the xTU-C receiver shall tolerate.
+       If the noise margin falls below this level, the xTU-C shall
+       request that the xTU-R increase the xTU-R transmit power.
+       If an increase of xTU-R transmit power is not possible, a loss-
+       of-margin (LOM) defect occurs, the xTU-C shall fail and attempt
+
+       to re-initialize and the NMS shall be notified.  The minimum
+       noise margin ranges from 0 to 310 units of 0.1 dB (physical
+       values are 0 to 31 dB).  A value of 0 means that there is no
+       minimum."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.3.6 (MINSNRMus)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 21 }
+
+xdsl2LConfProfMsgMinUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(4000..248000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Overhead Rate Upstream.  Defines the minimum rate of
+       the message-based overhead that shall be maintained by the xTU in
+       upstream direction.  Expressed in bits per second and ranges from
+       4000 to 248000 bits/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.5.1 (MSGMINus)"
+   DEFVAL       { 4000 }
+  ::= { xdsl2LineConfProfEntry 22 }
+
+xdsl2LConfProfMsgMinDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(4000..248000)
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Overhead Rate Downstream.  Defines the minimum rate
+       of the message-based overhead that shall be maintained by the xTU
+       in the downstream direction.  Expressed in bits per second and
+       ranges from 4000 to 248000 bits/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.5.2 (MSGMINds)"
+   DEFVAL       { 4000 }
+   ::= { xdsl2LineConfProfEntry 23 }
+
+xdsl2LConfProfCeFlag  OBJECT-TYPE
+   SYNTAX      Xdsl2LineCeFlag
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter is a bit that enables the use of the optional
+       cyclic extension values."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.6.1 (CEFLAG)"
+   DEFVAL       { { } }
+   ::= { xdsl2LineConfProfEntry 24 }
+
+xdsl2LConfProfSnrModeDs  OBJECT-TYPE
+   SYNTAX      Xdsl2LineSnrMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter enables the transmitter-referred virtual
+       noise in the downstream direction."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.7.1 (SNRMODEds)"
+   DEFVAL       { virtualNoiseDisabled }
+   ::= { xdsl2LineConfProfEntry 25 }
+
+xdsl2LConfProfSnrModeUs  OBJECT-TYPE
+   SYNTAX      Xdsl2LineSnrMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter enables the transmitter-referred virtual
+       noise in the upstream direction."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.7.2 (SNRMODEus)"
+   DEFVAL       { virtualNoiseDisabled }
+   ::= { xdsl2LineConfProfEntry 26 }
+
+xdsl2LConfProfTxRefVnDs  OBJECT-TYPE
+   SYNTAX      Xdsl2LineTxRefVnDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the downstream
+       transmitter-referred virtual noise.
+       The TXREFVNds shall be specified through a set of breakpoints.
+       Each breakpoint shall consist of a subcarrier index t, with a
+       subcarrier spacing of 4.3125 kHz, and a noise PSD level
+       (expressed in dBm/Hz) at that subcarrier.  The set of breakpoints
+       can then be represented as:
+       [(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)]."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.7.3 (TXREFVNds)"
+   ::= { xdsl2LineConfProfEntry 27 }
+
+xdsl2LConfProfTxRefVnUs  OBJECT-TYPE
+   SYNTAX      Xdsl2LineTxRefVnUs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the upstream
+       transmitter-referred virtual noise.
+       The TXREFVNus shall be specified through a set of breakpoints.
+       Each breakpoint shall consist of a subcarrier index t, with a
+       subcarrier spacing of 4.3125 kHz, and a noise PSD level
+       (expressed in dBm/Hz) at that subcarrier.  The set of breakpoints
+
+       can then be represented as:
+       [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.7.4 (TXREFVNus)"
+   ::= { xdsl2LineConfProfEntry 28 }
+
+xdsl2LConfProfXtuTransSysEna  OBJECT-TYPE
+   SYNTAX      Xdsl2TransmissionModeType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "xTU Transmission System Enabling (XTSE).  A list of the
+       different coding types enabled in this profile.  It is coded in a
+       bitmap representation with 1 or more bits set.  A bit set to
+       '1' means that the xTUs may apply the respective
+       coding for the DSL line.  A bit set to '0' means that
+       the xTUs cannot apply the respective coding for the ADSL line.
+       All 'reserved' bits should be set to '0'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.1 (XTSE)"
+   ::= { xdsl2LineConfProfEntry 29 }
+
+xdsl2LConfProfPmMode  OBJECT-TYPE
+   SYNTAX      Xdsl2LinePmMode
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Power management state Enabling (PMMode).  Defines the power
+       states the xTU-C or xTU-R may autonomously transition to on
+       this line.
+       This is a set of bits, where any bit with a '1' value
+       means that the xTU is allowed to transit into the respective
+       state and any bit with a '0' value means that the xTU
+       is not allowed to transit into the respective state."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.4 (PMMode)"
+   DEFVAL  { { allowTransitionsToIdle, allowTransitionsToLowPower } }
+   ::= { xdsl2LineConfProfEntry 30 }
+
+xdsl2LConfProfL0Time  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum time (in seconds) between an Exit from the L2
+       state and the next Entry into the L2 state.
+       It ranges from 0 to 255 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.5 (L0-TIME)"
+   DEFVAL       { 255 }
+   ::= { xdsl2LineConfProfEntry 31 }
+
+xdsl2LConfProfL2Time  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "seconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The minimum time (in seconds) between an Entry into the
+       L2 state and the first Power Trim in the L2 state and between two
+       consecutive Power Trims in the L2 state.
+       It ranges from 0 to 255 seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.6 (L2-TIME)"
+   DEFVAL       { 255 }
+   ::= { xdsl2LineConfProfEntry 32 }
+
+xdsl2LConfProfL2Atpr  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..31)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum aggregate transmit power reduction (in dB) that
+       can be performed at transition of L0 to L2 state or through a
+       single Power Trim in the L2 state.
+       It ranges from 0 dB to 31 dB."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.7 (L2-ATPR)"
+   DEFVAL       { 10 }
+   ::= { xdsl2LineConfProfEntry 33 }
+
+xdsl2LConfProfL2Atprt  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..31)
+   UNITS       "dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The total maximum aggregate transmit power reduction (in dB)
+       that can be performed in an L2 state.  This is the sum of all
+       reductions of L2 Requests (i.e., at transition of L0 to L2 state)
+       and Power Trims."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.9 (L2-ATPRT)"
+   DEFVAL       { 31 }
+   ::= { xdsl2LineConfProfEntry 34 }
+
+xdsl2LConfProfProfiles  OBJECT-TYPE
+   SYNTAX      Xdsl2LineProfiles
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The configuration parameter contains the G.993.2 profiles
+
+       to be allowed by the near-end xTU on this line.
+       It is coded in a bitmap representation (0 if not allowed, 1 if
+       allowed)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.1.11 (PROFILES)"
+   DEFVAL       { { profile8a,  profile8b,  profile8c,
+                    profile8d,  profile12a, profile12b,
+                    profile17a, profile30a } }
+   ::= { xdsl2LineConfProfEntry 35 }
+
+xdsl2LConfProfDpboEPsd  OBJECT-TYPE
+   SYNTAX      Xdsl2PsdMaskDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the PSD mask that is
+       assumed to be permitted at the exchange.  This parameter shall
+       use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds).
+       The maximum number of breakpoints for xdsl2LConfProfDpboEPsd
+       is 16."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOEPSD)"
+   ::= { xdsl2LineConfProfEntry 36 }
+
+xdsl2LConfProfDpboEsEL  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..511)
+   UNITS       "0.5 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the assumed electrical
+       length of cables (E-side cables) connecting exchange-based DSL
+       services to a remote flexibility point (cabinet), that hosts the
+       xTU-C that is subject to spectrally shaped downstream power back-
+       off (DPBO) depending on this length.  The electrical length is
+       defined as the loss (in dB) of an equivalent length of
+       hypothetical cable at a reference frequency defined by the
+       network operator or in spectrum management regulations.
+       This parameter shall be coded as an unsigned integer representing
+       an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as
+       511) in steps of 0.5 dB.  All values in the range are valid.  If
+       this parameter is set to '0', the DPBO shall be disabled."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESEL)"
+   DEFVAL      { 0 }
+   ::= { xdsl2LineConfProfEntry 37 }
+
+xdsl2LConfProfDpboEsCableModelA  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..640)
+   UNITS       "2^-8"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The E-side Cable Model parameter A (DPBOESCMA) of the cable
+       model (DPBOESCM) for cables connecting exchange-based DSL
+       services to a remote flexibility point (cabinet), that hosts the
+       xTU-C that is subject to spectrally shaped downstream power back-
+       off (DPBO) depending on this value.
+       The cable model is in terms of three scalars
+       xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
+       xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
+       xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
+       estimate the frequency dependent loss of E-side cables calculated
+       from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.  Possible
+       values shall be coded as unsigned integers representing a scalar
+       value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
+       2^-8.  All values in the range are valid.  This parameter is used
+       only for G.993.2."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMA)"
+   DEFVAL      { 0 }
+   ::= { xdsl2LineConfProfEntry 38 }
+
+xdsl2LConfProfDpboEsCableModelB  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..640)
+   UNITS       "2^-8"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The E-side Cable Model parameter B (DPBOESCMB) of the cable
+       model (DPBOESCM) for cables connecting exchange-based DSL
+       services to a remote flexibility point (cabinet), that hosts the
+       xTU-C that is subject to spectrally shaped downstream power back-
+       off (DPBO) depending on this value.
+       The cable model is in terms of three scalars
+       dsl2LConfProfDpboEsCableModelA (DPBOESCMA),
+       xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
+       xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
+       estimate the frequency dependent loss of E-side cables calculated
+       from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.  Possible
+       values shall be coded as unsigned integers representing a scalar
+       value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
+       2^-8.  All values in the range are valid.  This parameter is used
+       only for G.993.2."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMB)"
+   DEFVAL      { 0 }
+   ::= { xdsl2LineConfProfEntry 39 }
+
+xdsl2LConfProfDpboEsCableModelC  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..640)
+   UNITS       "2^-8"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The E-side Cable Model parameter C (DPBOESCMC) of the cable
+       model (DPBOESCM) for cables connecting exchange-based DSL
+       services to a remote flexibility point (cabinet), that hosts the
+       xTU-C that is subject to spectrally shaped downstream power back-
+       off (DPBO) depending on this value.
+       The cable model is in terms of three scalars
+       xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
+       xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and
+       xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that are used to
+       estimate the frequency dependent loss of E-side cables calculated
+       from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.  Possible
+       values shall be coded as unsigned integers representing a scalar
+       value from -1 (coded as 0) to 1.5 (coded as 640) in steps of
+       2^-8.  All values in the range are valid.  This parameter is used
+       only for G.993.2."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMC)"
+   DEFVAL      { 0 }
+   ::= { xdsl2LineConfProfEntry 40 }
+
+xdsl2LConfProfDpboMus OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "0.5 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the assumed Minimum
+       Usable receive PSD mask (in dBm/Hz) for exchange-based services,
+       used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX)
+       defined below (to determine the DPBO).  It shall be coded as an
+       unsigned integer representing a PSD mask level from 0 dBm/Hz
+       (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5
+       dBm/Hz.  All values in the range are valid.
+       NOTE - The PSD mask level is 3.5 dB above the signal PSD level.
+       This parameter is used only for G.993.2."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOMUS)"
+   DEFVAL      { 0 }
+   ::= { xdsl2LineConfProfEntry 41 }
+
+xdsl2LConfProfDpboFMin OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..2048)
+   UNITS       "4.3125 kHz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the minimum frequency
+       from which the DPBO shall be applied.  It ranges from 0 kHz
+       (coded as 0) to 8832 kHz (coded as 2048) in steps of
+       4.3125 kHz.  This parameter is used only for G.993.2."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMIN)"
+   DEFVAL      { 32 }
+   ::= { xdsl2LineConfProfEntry 42 }
+
+xdsl2LConfProfDpboFMax OBJECT-TYPE
+   SYNTAX      Unsigned32 (32..6956)
+   UNITS       "4.3125 kHz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the maximum frequency
+       at which DPBO may be applied.  It ranges from 138 kHz (coded as
+       32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
+       This parameter is used only for G.993.2."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMAX)"
+   DEFVAL      { 512 }
+   ::= { xdsl2LineConfProfEntry 43 }
+
+xdsl2LConfProfUpboKL  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..1280)
+   UNITS       "0.1 dB"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the electrical length
+       expressed in dB at 1 MHz, kl0, configured by the CO-MIB.
+       The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in
+       steps of 0.1 dB.  This parameter is relevant only if
+       xdsl2LConfProfUpboKLF is set to 'override(2)', which indicates
+       that this parameter's value will override the VTUs'
+       determination of the electrical length.
+       If xdsl2LConfProfUpboKLF is set either to auto(1) or
+       disableUpbo(3), then this parameter will be ignored."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOKL)"
+   DEFVAL      { 0 }
+   ::= { xdsl2LineConfProfEntry 44 }
+
+xdsl2LConfProfUpboKLF OBJECT-TYPE
+   SYNTAX      Xdsl2UpboKLF
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Defines the upstream power backoff force mode."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOKLF)
+   "
+   DEFVAL      { disableUpbo }
+   ::= { xdsl2LineConfProfEntry 45 }
+
+xdsl2LConfProfUs0Mask  OBJECT-TYPE
+   SYNTAX      Xdsl2LineUs0Mask
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The configuration parameter contains the US0 PSD masks to be
+       allowed by the near-end xTU on the line.  This parameter is only
+       defined for G.993.2 Annex A.  It is represented as a bitmap (0
+       if not allowed and 1 if allowed)."
+   REFERENCE    "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.18
+                 (US0MASK)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineConfProfEntry 46 }
+
+xdsl2LConfProfForceInp  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "This parameter, when set to 'true' indicates that the framer
+        settings of the bearer shall be selected such that the impulse
+        noise protection computed according to the formula specified in
+        the relevant Recommendation is greater than or equal to the
+        minimal impulse noise protection requirement.
+        This flag shall have the same value for all the bearers of one
+        line in the same direction."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.5 (FORCEINP)"
+   DEFVAL       { false }
+   ::= { xdsl2LineConfProfEntry 47 }
+
+xdsl2LConfProfRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       A profile is activated by setting this object to 'active'.
+
+       Before a profile can be deleted or taken out of service (by
+       setting this object to 'destroy' or 'notInService'), it MUST be
+       first unreferenced from all templates.
+
+       A row in this table is said to be unreferenced when there is no
+       instance of xdsl2LConfTempLineProfile that refers to the row.
+
+       When a row is created in this table, the SNMP agent should also
+       create corresponding rows in the tables
+       xdsl2LineConfProfModeSpecTable and
+       xdsl2LineConfProfModeSpecBandUsTable.
+       When a row is deleted in this table, the SNMP agent should also
+       delete corresponding rows in the tables
+       xdsl2LineConfProfModeSpecTable and
+       xdsl2LineConfProfModeSpecBandUsTable."
+   ::= { xdsl2LineConfProfEntry 48 }
+
+------------------------------------------
+--    xdsl2LineConfProfModeSpecTable    --
+------------------------------------------
+
+xdsl2LineConfProfModeSpecTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineConfProfModeSpecEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineConfProfModeSpecTable extends the DSL
+       line configuration profile by xDSL Mode-Specific parameters.
+       A row in this table that has an index of xdsl2LConfProfXdslMode
+       == defMode(1), is called a 'mandatory' row or 'default' row.
+       A row in this table that has an index such that
+       xdsl2LConfProfXdslMode is not equal to defMode(1), is called an
+       'optional' row or 'mode-specific' row.
+       When a row in the xdsl2LineConfProfTable table (the parent row)
+       is created, the SNMP agent will automatically create a
+       'mandatory' row in this table.
+       When the parent row is deleted, the SNMP agent will automatically
+       delete all associated rows in this table.
+       Any attempt to delete the 'mandatory' row using the
+       xdsl2LConfProfModeSpecRowStatus object will be rejected by the
+       SNMP agent.
+       The manager MAY create an 'optional' row in this table using the
+       xdsl2LConfProfModeSpecRowStatus object if the parent row
+       exists.
+       The manager MAY delete an 'optional' row in this table using the
+       xdsl2LConfProfModeSpecRowStatus object at any time.
+       If the actual transmission mode of a DSL line does not match one
+       of the 'optional' rows in this table, then the line will use the
+       PSD configuration from the 'mandatory' row.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+   ::= { xdsl2ProfileLine 3 }
+
+xdsl2LineConfProfModeSpecEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineConfProfModeSpecEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineConfProfModeSpecTable extends the
+       DSL line configuration profile by DSL Mode-Specific
+       parameters."
+   INDEX  { xdsl2LConfProfProfileName, xdsl2LConfProfXdslMode }
+   ::= { xdsl2LineConfProfModeSpecTable 1 }
+
+Xdsl2LineConfProfModeSpecEntry  ::=
+   SEQUENCE {
+      xdsl2LConfProfXdslMode             Xdsl2OperationModes,
+      xdsl2LConfProfMaxNomPsdDs          Integer32,
+      xdsl2LConfProfMaxNomPsdUs          Integer32,
+      xdsl2LConfProfMaxNomAtpDs          Unsigned32,
+      xdsl2LConfProfMaxNomAtpUs          Unsigned32,
+      xdsl2LConfProfMaxAggRxPwrUs        Integer32,
+      xdsl2LConfProfPsdMaskDs            Xdsl2PsdMaskDs,
+      xdsl2LConfProfPsdMaskUs            Xdsl2PsdMaskUs,
+      xdsl2LConfProfPsdMaskSelectUs      Xdsl2LinePsdMaskSelectUs,
+      xdsl2LConfProfClassMask            Xdsl2LineClassMask,
+      xdsl2LConfProfLimitMask            Xdsl2LineLimitMask,
+      xdsl2LConfProfUs0Disable           Xdsl2LineUs0Disable,
+      xdsl2LConfProfModeSpecRowStatus    RowStatus
+   }
+
+xdsl2LConfProfXdslMode    OBJECT-TYPE
+   SYNTAX      Xdsl2OperationModes
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The DSL Mode is a way of categorizing the various xDSL
+       transmission modes into groups, each group (xDSL Mode) shares
+       the same PSD configuration.
+       There should be multiple entries in this table for a given line
+       profile in case multiple bits are set in
+       xdsl2LConfProfXtuTransSysEna for that profile."
+   REFERENCE    "DSL Forum TR-129, paragraph #5.5"
+   ::= { xdsl2LineConfProfModeSpecEntry 1 }
+
+xdsl2LConfProfMaxNomPsdDs  OBJECT-TYPE
+   SYNTAX      Integer32(-600..-300)
+   UNITS       "0.1 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal transmit PSD in the downstream direction
+       during initialization and Showtime.  It ranges from -600 to -300
+       units of 0.1 dBm/Hz (physical values are -60 to -30
+       dBm/Hz)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.1 (MAXNOMPSDds)"
+   DEFVAL       { -300 }
+  ::= { xdsl2LineConfProfModeSpecEntry 2 }
+
+xdsl2LConfProfMaxNomPsdUs  OBJECT-TYPE
+   SYNTAX      Integer32(-600..-300)
+   UNITS       "0.1 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal transmit PSD in the upstream direction
+       during initialization and Showtime.  It ranges from -600 to
+       -300 units of 0.1 dBm/Hz (physical values are -60 to -30
+       dBm/Hz)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.2 (MAXNOMPSDus)"
+   DEFVAL       { -300 }
+   ::= { xdsl2LineConfProfModeSpecEntry 3 }
+
+xdsl2LConfProfMaxNomAtpDs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal aggregate to transmit power in the
+       downstream direction during initialization and Showtime.  It
+       ranges from 0 to 255 units of 0.1 dBm (physical values are 0
+       to 25.5 dBm)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.3 (MAXNOMATPds)"
+   DEFVAL       { 255 }
+   ::= { xdsl2LineConfProfModeSpecEntry 4 }
+
+xdsl2LConfProfMaxNomAtpUs  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..255)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum nominal aggregate transmit power in the upstream
+       direction during initialization and Showtime.  It ranges from
+       0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
+       dBm)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.4 (MAXNOMATPus)"
+   DEFVAL       { 255 }
+   ::= { xdsl2LineConfProfModeSpecEntry 5 }
+
+xdsl2LConfProfMaxAggRxPwrUs  OBJECT-TYPE
+   SYNTAX      Integer32(-255..255 | 2147483647)
+   UNITS       "0.1 dBm"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The maximum upstream aggregate receive power over the
+       relevant set of subcarriers.  The xTU-C should verify that the
+       upstream power cutback is such that this maximum aggregate
+       receive power value is honored.  It ranges from -255 to 255
+       units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
+       A value of 0x7FFFFFFF (2147483647) means that there is no
+       limit."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.5 (MAXRXPWRus)"
+   DEFVAL       { 255 }
+   ::= { xdsl2LineConfProfModeSpecEntry 6 }
+
+xdsl2LConfProfPsdMaskDs   OBJECT-TYPE
+   SYNTAX      Xdsl2PsdMaskDs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "The downstream PSD mask applicable at the U-C2 reference
+      point.
+      This parameter is used only for G.992.5 and it may impose PSD
+      restrictions (breakpoints) in addition to the Limit PSD mask
+      defined in G.992.5.
+      This is a string of 32 pairs of values in the following
+      structure:
+      Octets 0-1 - Index of the first subcarrier used in the context of
+                   a first breakpoint.
+      Octet 2    - The PSD reduction for the subcarrier indicated in
+                   octets 0 and 1.
+      Octets 3-5 - Same, for a second breakpoint.
+      Octets 6-8 - Same, for a third breakpoint.
+      This architecture continues until octets 94-95, which are
+      associated with a 32nd breakpoint.
+      Each subcarrier index is an unsigned number in the range 0 and
+      NSCds-1.  Each PSD reduction value is in the range 0 (0 dBm/Hz) to
+      255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz.  Valid values are in
+      the range 0 to 190 (0 to -95 dBm/Hz).
+      When the number of breakpoints is less than 32, all remaining
+      octets are set to the value '0'.  Note that the content of this
+      object should be correlated with the subcarrier mask and with
+
+      the RFI setup."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.9 (PSDMASKds)"
+     ::= { xdsl2LineConfProfModeSpecEntry 7 }
+
+xdsl2LConfProfPsdMaskUs   OBJECT-TYPE
+   SYNTAX      Xdsl2PsdMaskUs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "The upstream PSD mask applicable at the U-R2 reference
+      point.
+      This parameter is used only for G.992.5, and it may impose PSD
+      restrictions (breakpoints) in addition to the Limit PSD mask
+      defined in G.992.5.
+      This is a string of 16 pairs of values in the following
+      structure:
+      Octets 0-1 - Index of the first subcarrier used in the context of
+                   a first breakpoint.
+      Octet 2    - The PSD reduction for the subcarrier indicated in
+                   octets 0 and 1.
+      Octets 3-5 - Same, for a second breakpoint.
+      Octets 6-8 - Same, for a third breakpoint.
+      This architecture continues until octets 9-47, which are
+      associated with a 16th breakpoint.
+      Each subcarrier index is an unsigned number in the range 0 and
+      NSCus-1.  Each PSD reduction value is in the range 0 (0 dBm/Hz) to
+      255 (-127.5 dBm/Hz) with steps of 0.5 dBm/Hz.  Valid values are in
+      the range 0 to 190 (0 to -95 dBm/Hz).
+      When the number of breakpoints is less than 16, all remaining
+      octets are set to the value '0'.  Note that the content of this
+      object should be correlated with the subcarrier mask and with
+      the RFI setup."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.12 (PSDMASKus)"
+     ::= { xdsl2LineConfProfModeSpecEntry 8 }
+
+xdsl2LConfProfPsdMaskSelectUs  OBJECT-TYPE
+   SYNTAX      Xdsl2LinePsdMaskSelectUs
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+     "The selected upstream PSD mask.  This parameter is used only
+      for Annexes J and M of G.992.3 and G.992.5, and the same
+      selection is used for all relevant enabled bits in
+      xdsl2LConfProfXtuTransSysEna."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.11
+                (Upstream PSD mask selection)"
+   DEFVAL       { adlu32Eu32 }
+    ::= { xdsl2LineConfProfModeSpecEntry 9 }
+
+xdsl2LConfProfClassMask  OBJECT-TYPE
+   SYNTAX      Xdsl2LineClassMask
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "In order to reduce the number of configuration
+       possibilities, the limit Power Spectral Density masks (see
+       LIMITMASK) are grouped in PSD mask classes.
+       Each class is designed such that the PSD levels of each limit PSD
+       mask of a specific class are equal in their respective passband
+       above 552 kHz.
+       This parameter is defined per VDSL2 Annex enabled in the
+       xdsl2LConfProfXtuTransSysEna object.  It selects a single PSD
+       mask class per Annex that is activated at the VTU-O."
+   REFERENCE    "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.15
+                (CLASSMASK)"
+   DEFVAL       { a998ORb997M1cORc998B }
+   ::= { xdsl2LineConfProfModeSpecEntry 10 }
+
+xdsl2LConfProfLimitMask  OBJECT-TYPE
+   SYNTAX      Xdsl2LineLimitMask
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter contains the G.993.2 limit
+       PSD masks of the selected PSD mask class, enabled by the near-end
+       xTU on this line for each class of profiles.
+       This parameter is defined per VDSL2 Annex enabled in the
+       xdsl2LConfProfXtuTransSysEna object.
+       Through this parameter, several limit PSD masks of the selected
+       PSD mask class (xdsl2LConfProfClassMask) may be enabled.  The
+       enabling parameter is coded in a bitmap representation (0 if the
+       associated mask is not allowed, 1 if it is allowed)."
+   REFERENCE    "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.16
+                 (LIMITMASK)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineConfProfModeSpecEntry 11 }
+
+xdsl2LConfProfUs0Disable  OBJECT-TYPE
+   SYNTAX      Xdsl2LineUs0Disable
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter indicates if the use of the US0 is
+       disabled for each limit PSD mask enabled in the
+       xdsl2LConfProfLimitMask parameter.
+       This parameter is defined per VDSL2 Annex enabled in the
+       xdsl2LConfProfXtuTransSysEna object.
+
+       For each limit PSD mask enabled in the xdsl2LConfProfLimitMask
+       parameter, a bit shall indicate if the US0 is disabled.  The
+       disabling parameter is coded as a bitmap.  The bit is set to '1'
+       if the US0 is disabled for the associated limit mask.
+       This parameter and the xdsl2LConfProfLimitMask parameter use the
+       same structure."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.1.2.17 (US0DISABLE)"
+   DEFVAL       { {} }
+   ::= { xdsl2LineConfProfModeSpecEntry 12 }
+
+xdsl2LConfProfModeSpecRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       This row is activated by setting this object to 'active'.
+
+       A 'mandatory' row, as defined in the DESCRIPTION clause of
+       xdsl2LineConfProfModeSpecTable, cannot be deleted at all.
+
+       A 'mandatory' row can be taken out of service
+       (by setting this object to 'notInService') if the parent
+       row in the xdsl2LineConfProfTable table is not in
+       the 'active' state.
+
+       An 'optional' row (or 'mode-specific' row) can be deleted or
+       taken out of service (by setting this object to 'destroy' or
+       'notInService') at any time."
+   ::= { xdsl2LineConfProfModeSpecEntry 13 }
+
+----------------------------------------------
+--   xdsl2LineConfProfModeSpecBandUsTable   --
+----------------------------------------------
+
+xdsl2LineConfProfModeSpecBandUsTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineConfProfModeSpecBandUsEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineConfProfModeSpecBandUsTable extends
+       xdsl2LineConfProfModeSpecTable with upstream-band-specific
+       parameters for VDSL2, such as upstream power back-off
+       parameters xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB
+       (UPBOPSD-pb).
+
+       When a parent 'mandatory row' is created in
+       xdsl2LineConfProfModeSpecTable, the SNMP agent will automatically
+       create several 'mandatory' rows in this table -- one for each
+       upstream band:
+       Note: A mandatory row is one where xdsl2LConfProfXdslMode =
+       defMode(1).  When the parent row is deleted, the SNMP agent will
+       automatically delete all associated rows in this table.  Any
+       attempt to delete a 'mandatory' row using the
+       xdsl2LConfProfModeSpecBandUsRowStatus object will be rejected
+       by the SNMP agent.  The manager MAY create a new 'optional'
+       row in this table using the xdsl2LConfProfModeSpecBandUsRowStatus
+       object if the associated parent row exists, and the
+       value of xdsl2LConfProfXdslMode is a G.993.2 value.  The manager
+       MAY delete an 'optional' row in this table using the
+       xdsl2LConfProfModeSpecBandUsRowStatus object at any time.
+
+       With respect to the xdsl2LConfProfUpboPsdA and
+       xdsl2LConfProfUpboPsdB parameters, for a given upstream band,
+       if an optional row is missing from this table, then that
+       means upstream power back-off is disabled for that upstream
+       band.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+   ::= { xdsl2ProfileLine 4 }
+
+xdsl2LineConfProfModeSpecBandUsEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineConfProfModeSpecBandUsEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineConfProfModeSpecBandUsTable extends
+       xdsl2LineConfProfModeSpecTable with upstream-band-specific
+       parameters for VDSL2, such as upstream power back-off parameters
+       xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB (UPBOPSD-
+       pb)."
+   INDEX       { xdsl2LConfProfProfileName, xdsl2LConfProfXdslMode,
+                 xdsl2LConfProfXdslBandUs}
+   ::= { xdsl2LineConfProfModeSpecBandUsTable 1 }
+
+Xdsl2LineConfProfModeSpecBandUsEntry  ::=
+   SEQUENCE {
+      xdsl2LConfProfXdslBandUs                 Xdsl2BandUs,
+      xdsl2LConfProfUpboPsdA                   Integer32,
+      xdsl2LConfProfUpboPsdB                   Integer32,
+      xdsl2LConfProfModeSpecBandUsRowStatus    RowStatus
+   }
+
+xdsl2LConfProfXdslBandUs    OBJECT-TYPE
+   SYNTAX      Xdsl2BandUs
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "Each value identifies a specific band in the upstream
+       transmission direction (excluding the US0 band)."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14"
+   ::= { xdsl2LineConfProfModeSpecBandUsEntry 1 }
+
+xdsl2LConfProfUpboPsdA  OBJECT-TYPE
+   SYNTAX      Integer32(4000..8095)
+   UNITS       "0.01 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the 'a' reference
+       parameter of the UPBO reference PSD used to compute the
+       upstream power back-off for the upstream band.  A UPBO PSD
+       defined for each band shall consist of two parameters [a, b].
+       Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
+       (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
+       dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
+       dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
+       0.01 dBm/Hz.  The UPBO reference PSD at the frequency 'f'
+       expressed in MHz shall be equal to '-a-b(SQRT(f))'.  Setting
+       xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
+       a special configuration to disable UPBO in the respective
+       upstream band."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
+   DEFVAL      { 4000 }
+  ::= { xdsl2LineConfProfModeSpecBandUsEntry 2 }
+
+xdsl2LConfProfUpboPsdB  OBJECT-TYPE
+   SYNTAX      Integer32(0..4095)
+   UNITS       "0.01 dBm/Hz"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This configuration parameter defines the 'b' reference
+       parameter of the UPBO reference PSD used to compute the
+       upstream power back-off for the upstream band.  A UPBO PSD
+       defined for each band shall consist of two parameters [a, b].
+       Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
+       (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
+       dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
+       dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
+       0.01 dBm/Hz.  The UPBO reference PSD at the frequency 'f'
+
+       expressed in MHz shall be equal to '-a-b(SQRT(f))'.  Setting
+       xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
+       a special configuration to disable UPBO in the respective
+       upstream band."
+   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
+   DEFVAL      { 0 }
+  ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }
+
+xdsl2LConfProfModeSpecBandUsRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       This row is activated by setting this object to 'active'.
+
+       A 'mandatory' row, as defined in the DESCRIPTION clause of
+       xdsl2LineConfProfModeSpecBandUsTable, cannot be deleted at all.
+
+       A 'mandatory' row can be taken out of service
+       (by setting this object to 'notInService') if the parent
+       row in the xdsl2LineConfProfModeSpecTable table is not in
+       the 'active' state.
+
+       An 'optional' row (or 'mode-specific' row) can be deleted or
+       taken out of service (by setting this object to 'destroy' or
+       'notInService') at any time."
+   ::= { xdsl2LineConfProfModeSpecBandUsEntry 4 }
+
+------------------------------------------------
+--          xdsl2ChConfProfileTable           --
+------------------------------------------------
+
+xdsl2ChConfProfileTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2ChConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2ChConfProfileTable contains DSL channel
+       profile configuration.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+   ::= { xdsl2ProfileChannel 1 }
+
+xdsl2ChConfProfileEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2ChConfProfileEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "A default profile with an index of 'DEFVAL' will always
+      exist, and its parameters will be set to vendor-specific values,
+      unless otherwise specified in this document."
+   INDEX  { xdsl2ChConfProfProfileName }
+   ::= { xdsl2ChConfProfileTable 1 }
+
+Xdsl2ChConfProfileEntry  ::=
+   SEQUENCE {
+      xdsl2ChConfProfProfileName          SnmpAdminString,
+      xdsl2ChConfProfMinDataRateDs        Unsigned32,
+      xdsl2ChConfProfMinDataRateUs        Unsigned32,
+      xdsl2ChConfProfMinResDataRateDs     Unsigned32,
+      xdsl2ChConfProfMinResDataRateUs     Unsigned32,
+      xdsl2ChConfProfMaxDataRateDs        Unsigned32,
+      xdsl2ChConfProfMaxDataRateUs        Unsigned32,
+      xdsl2ChConfProfMinDataRateLowPwrDs  Unsigned32,
+      xdsl2ChConfProfMinDataRateLowPwrUs  Unsigned32,
+      xdsl2ChConfProfMaxDelayDs           Unsigned32,
+      xdsl2ChConfProfMaxDelayUs           Unsigned32,
+      xdsl2ChConfProfMinProtectionDs      Xdsl2SymbolProtection,
+      xdsl2ChConfProfMinProtectionUs      Xdsl2SymbolProtection,
+      xdsl2ChConfProfMinProtection8Ds     Xdsl2SymbolProtection8,
+      xdsl2ChConfProfMinProtection8Us     Xdsl2SymbolProtection8,
+      xdsl2ChConfProfMaxBerDs             Xdsl2MaxBer,
+      xdsl2ChConfProfMaxBerUs             Xdsl2MaxBer,
+      xdsl2ChConfProfUsDataRateDs         Unsigned32,
+      xdsl2ChConfProfDsDataRateDs         Unsigned32,
+      xdsl2ChConfProfUsDataRateUs         Unsigned32,
+      xdsl2ChConfProfDsDataRateUs         Unsigned32,
+      xdsl2ChConfProfImaEnabled           TruthValue,
+      xdsl2ChConfProfMaxDelayVar          Unsigned32,
+      xdsl2ChConfProfInitPolicy           Xdsl2ChInitPolicy,
+      xdsl2ChConfProfRowStatus            RowStatus
+   }
+
+xdsl2ChConfProfProfileName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+   ::= { xdsl2ChConfProfileEntry 1 }
+
+xdsl2ChConfProfMinDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Data Rate on Downstream direction.  The minimum net
+       data rate for the bearer channel, coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.1
+                 (Minimum data rate)"
+   ::= { xdsl2ChConfProfileEntry 2 }
+
+xdsl2ChConfProfMinDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Data Rate on Upstream direction.  The minimum net
+       data rate for the bearer channel, coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.1
+                 (Minimum data rate)"
+   ::= { xdsl2ChConfProfileEntry 3 }
+
+xdsl2ChConfProfMinResDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Reserved Data Rate on Downstream direction.  The
+       minimum reserved net data rate for the bearer channel, coded
+       in bit/s.  This parameter is used only if the Rate Adaptation
+       Mode in the direction of the bearer channel (i.e.,
+       xdsl2LConfProfRaModeDs) is set to 'dynamicRa'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.2
+                 (Minimum reserved data rate)"
+   ::= { xdsl2ChConfProfileEntry 4 }
+
+xdsl2ChConfProfMinResDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Minimum Reserved Data Rate on Upstream direction.  The
+       minimum reserved net data rate for the bearer channel, coded in
+       bit/s.  This parameter is used only if the Rate Adaptation Mode
+       in the direction of the bearer channel (i.e.,
+       xdsl2LConfProfRaModeUs) is set to 'dynamicRa'."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.2
+                 (Minimum reserved data rate)"
+   ::= { xdsl2ChConfProfileEntry 5 }
+
+xdsl2ChConfProfMaxDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Data Rate on Downstream direction.  The maximum net
+       data rate for the bearer channel, coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.3
+                 (Maximum data rate)"
+   ::= { xdsl2ChConfProfileEntry 6 }
+
+xdsl2ChConfProfMaxDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Data Rate on Upstream direction.  The maximum net
+       data rate for the bearer channel, coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.3
+                 (Maximum data rate)"
+   ::= { xdsl2ChConfProfileEntry 7 }
+
+xdsl2ChConfProfMinDataRateLowPwrDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter specifies the minimum net data rate for
+       the bearer channel as desired by the operator of the system
+       during the low power state (L1/L2).  The power management low
+       power states L1 and L2 are defined in ITU-T Recommendations
+       G.992.2 and G.992.3, respectively.
+       The data rate is coded in steps of bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.5
+                 (Minimum Data Rate in low power state)"
+   ::= { xdsl2ChConfProfileEntry 8 }
+
+xdsl2ChConfProfMinDataRateLowPwrUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter specifies the minimum net data rate for
+       the bearer channel as desired by the operator of the system
+       during the low power state (L1/L2).  The power management low
+       power states L1 and L2 are defined in ITU-T Recommendations
+       G.992.2 and G.992.3, respectively.
+       The data rate is coded in steps of bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.1.5
+                 (Minimum Data Rate in low power state)"
+   ::= { xdsl2ChConfProfileEntry 9 }
+
+xdsl2ChConfProfMaxDelayDs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..63)
+   UNITS       "milliseconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Interleave Delay on Downstream direction.  The
+       maximum one-way interleaving delay introduced by the PMS-TC on
+       Downstream direction.  The xTUs shall choose the S (factor) and D
+       (depth) values such that the actual one-way interleaving delay
+       (Xdsl2ChStatusActDelay) is as close as possible to, but less than
+       or equal to, xdsl2ChConfProfMaxDelayDs.  The delay is coded in
+       ms, with the value 0 indicating no delay bound is being
+       imposed."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.2
+                 (Maximum interleaving delay)"
+   ::= { xdsl2ChConfProfileEntry 10 }
+
+xdsl2ChConfProfMaxDelayUs  OBJECT-TYPE
+   SYNTAX      Unsigned32(0..63)
+   UNITS       "milliseconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Interleave Delay on Upstream direction.  The maximum
+       one-way interleaving delay introduced by the PMS-TC on Upstream
+       direction.  The xTUs shall choose the S (factor) and D (depth)
+       values such that the actual one-way interleaving delay
+       (Xdsl2ChStatusActDelay) is as close as possible to, but less than
+       or equal to, xdsl2ChConfProfMaxDelayUs.  The delay is coded in
+       ms, with the value 0 indicating no delay bound is being
+       imposed."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.2
+                 (Maximum interleaving delay)"
+   ::= { xdsl2ChConfProfileEntry 11 }
+
+xdsl2ChConfProfMinProtectionDs  OBJECT-TYPE
+   SYNTAX      Xdsl2SymbolProtection
+   UNITS       "symbols"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter specifies the minimum impulse noise
+       protection for the bearer channel if it is transported over DMT
+       symbols with a subcarrier spacing of 4.3125 kHz.  The impulse
+       noise protection is expressed in DMT symbols with a subcarrier
+       spacing of 4.3125 kHz and can take the values 1/2 and any integer
+       from 0 to 16, inclusive.  If the xTU does not support the
+       configured INPMIN value, it shall use the nearest supported
+       impulse noise protection greater than INPMIN."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)"
+   DEFVAL       { noProtection }
+   ::= { xdsl2ChConfProfileEntry 12 }
+
+xdsl2ChConfProfMinProtectionUs  OBJECT-TYPE
+   SYNTAX      Xdsl2SymbolProtection
+   UNITS       "symbols"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter specifies the minimum impulse noise
+       protection for the bearer channel if it is transported over DMT
+       symbols with a subcarrier spacing of 4.3125 kHz.  The impulse
+       noise protection is expressed in DMT symbols with a subcarrier
+       spacing of 4.3125 kHz and can take the values 1/2 and any integer
+       from 0 to 16, inclusive.  If the xTU does not support the
+       configured INPMIN value, it shall use the nearest supported
+       impulse noise protection greater than INPMIN."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.3 (INPMINus)"
+   DEFVAL       { noProtection }
+   ::= { xdsl2ChConfProfileEntry 13 }
+
+xdsl2ChConfProfMinProtection8Ds  OBJECT-TYPE
+   SYNTAX      Xdsl2SymbolProtection8
+   UNITS       "symbols"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter specifies the minimum impulse noise
+       protection for the bearer channel if it is transported over DMT
+       symbols with a subcarrier spacing of 8.625 kHz.  The impulse
+       noise protection is expressed in DMT symbols with a subcarrier
+       spacing of 8.625 kHz."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8ds)"
+   DEFVAL       { noProtection }
+   ::= { xdsl2ChConfProfileEntry 14 }
+
+xdsl2ChConfProfMinProtection8Us  OBJECT-TYPE
+   SYNTAX      Xdsl2SymbolProtection8
+   UNITS       "symbols"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This parameter specifies the minimum impulse noise
+       protection for the bearer channel if it is transported over DMT
+       symbols with a subcarrier spacing of 8.625 kHz.  The impulse
+       noise protection is expressed in DMT symbols with a subcarrier
+       spacing of 8.625 kHz."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8us)"
+   DEFVAL       { noProtection }
+   ::= { xdsl2ChConfProfileEntry 15 }
+
+xdsl2ChConfProfMaxBerDs  OBJECT-TYPE
+   SYNTAX      Xdsl2MaxBer
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Bit Error Ratio on Downstream direction.  The
+       maximum bit error ratio for the bearer channel."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.6
+                 (Maximum bit error ratio)"
+   DEFVAL       { eminus5 }
+  ::= { xdsl2ChConfProfileEntry 16 }
+
+xdsl2ChConfProfMaxBerUs  OBJECT-TYPE
+   SYNTAX      Xdsl2MaxBer
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum Bit Error Ratio on Upstream direction.  The maximum
+       bit error ratio for the bearer channel."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.6
+                 (Maximum bit error ratio)"
+   DEFVAL       { eminus5 }
+   ::= { xdsl2ChConfProfileEntry 17 }
+
+xdsl2ChConfProfUsDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Upshift for Downstream direction.  An
+       'Up-Shift rate change' event is triggered when the
+       actual downstream data rate exceeds, by more than the threshold,
+       the data rate at the last entry into Showtime.  The parameter is
+       coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.8.1
+                 (Data rate threshold upshift)"
+   ::= { xdsl2ChConfProfileEntry 18 }
+
+xdsl2ChConfProfDsDataRateDs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Downshift for Downstream direction.  A
+       'Down-Shift rate change' event is triggered when the
+       actual downstream data rate is below the data rate at the last
+       entry into Showtime, by more than the threshold.  The parameter
+       is coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.8.2
+                 (Data rate threshold downshift)"
+   ::= { xdsl2ChConfProfileEntry 19 }
+
+xdsl2ChConfProfUsDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Upshift for Upstream direction.  An
+       'Up-Shift rate change' event is triggered when the
+       actual upstream data rate exceeds, by more than the threshold,
+       the data rate at the last entry into Showtime.  The parameter is
+       coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.8.1
+                 (Data rate threshold upshift)"
+   ::= { xdsl2ChConfProfileEntry 20 }
+
+xdsl2ChConfProfDsDataRateUs  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "bits/second"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Data Rate Threshold Downshift for Upstream direction.  A
+       'Down-Shift rate change' event is triggered when the
+       actual upstream data rate is below the data rate at the last
+
+       entry into Showtime, by more than the threshold.  The parameter
+       is coded in bit/s."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.2.8.2
+                 (Data rate threshold downshift)"
+   ::= { xdsl2ChConfProfileEntry 21 }
+
+xdsl2ChConfProfImaEnabled  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "IMA Mode Enable.  The parameter enables the IMA operation
+       mode in the ATM Data Path.  Relevant only if the channel is of
+       ATM Data Path.  When in 'enable' state, the ATM Data
+       Path should comply with the requirements for IMA
+       transmission."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.3.4.1
+                 (IMA operation mode enable parameter)"
+   DEFVAL       { false }
+ ::= { xdsl2ChConfProfileEntry 22 }
+
+xdsl2ChConfProfMaxDelayVar  OBJECT-TYPE
+   SYNTAX      Unsigned32(1..255)
+   UNITS       "0.1 milliseconds"
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Maximum delay variation (DVMAX).
+       This optional VDSL2-specific parameter specifies the maximum
+       value for the delay variation allowed in an OLR procedure.
+       It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1
+       to 25.4 milliseconds) with the special value 255, which indicates
+       that no delay variation bound is imposed."
+   REFERENCE    "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.9
+                 (DVMAX)"
+   DEFVAL       { 255 }
+ ::= { xdsl2ChConfProfileEntry 23 }
+
+xdsl2ChConfProfInitPolicy  OBJECT-TYPE
+   SYNTAX      Xdsl2ChInitPolicy
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "Channel Initialization Policy Selection (CIPOLICY).
+       This optional parameter indicates which policy shall be applied
+       to determine the transceiver configuration parameters at
+       initialization.  Those policies are defined in the respective
+       Recommendations."
+   REFERENCE    "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10
+                 (CIPOLICY)"
+   DEFVAL       { policy0 }
+ ::= { xdsl2ChConfProfileEntry 24 }
+
+xdsl2ChConfProfRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       A profile is activated by setting this object to 'active'.
+
+       Before a profile can be deleted or taken out of service (by
+       setting this object to 'destroy' or 'notInService'), it MUST be
+       first unreferenced from all associated templates.
+
+       A row in xdsl2ChConfProfTable is said to be unreferenced when
+       there is no instance of xdsl2LConfTempChan1ConfProfile,
+       xdsl2LConfTempChan2ConfProfile, xdsl2LConfTempChan3ConfProfile,
+       or xdsl2LConfTempChan4ConfProfile that refers to
+       the row."
+   ::= { xdsl2ChConfProfileEntry 25 }
+
+------------------------------------------------
+--      xdsl2LineAlarmConfTemplateTable       --
+------------------------------------------------
+
+xdsl2LineAlarmConfTemplateTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2LineAlarmConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2LineAlarConfTemplateTable contains DSL
+       line alarm configuration templates.
+
+        Entries in this table MUST be maintained in a persistent
+        manner."
+   ::= { xdsl2ProfileAlarmConf 1 }
+
+xdsl2LineAlarmConfTemplateEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2LineAlarmConfTemplateEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "A default template with an index of 'DEFVAL' will always
+
+       exist, and its parameters will be set to vendor-specific values,
+       unless otherwise specified in this document."
+   INDEX  { xdsl2LAlarmConfTempTemplateName }
+   ::= { xdsl2LineAlarmConfTemplateTable 1 }
+
+Xdsl2LineAlarmConfTemplateEntry  ::=
+   SEQUENCE {
+      xdsl2LAlarmConfTempTemplateName      SnmpAdminString,
+      xdsl2LAlarmConfTempLineProfile       SnmpAdminString,
+      xdsl2LAlarmConfTempChan1ConfProfile  SnmpAdminString,
+      xdsl2LAlarmConfTempChan2ConfProfile  SnmpAdminString,
+      xdsl2LAlarmConfTempChan3ConfProfile  SnmpAdminString,
+      xdsl2LAlarmConfTempChan4ConfProfile  SnmpAdminString,
+      xdsl2LAlarmConfTempRowStatus         RowStatus
+   }
+
+xdsl2LAlarmConfTempTemplateName  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "This object identifies a row in this table."
+   ::= { xdsl2LineAlarmConfTemplateEntry 1 }
+
+xdsl2LAlarmConfTempLineProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the DSL Line
+       Thresholds Configuration Profile Table
+       (xdsl2LineAlarmConfProfileTable) that applies to this line."
+   REFERENCE    "DSL Forum TR-129, paragraph #8.2"
+   DEFVAL       { "DEFVAL" }
+   ::= { xdsl2LineAlarmConfTemplateEntry 2 }
+
+xdsl2LAlarmConfTempChan1ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(1..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the DSL
+       Channel Thresholds Configuration Profile Table
+       (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+       channel #1.  The channel profile name specified here MUST match
+       the name of an existing row in the xdsl2ChAlarmConfProfileTable
+       table."
+   REFERENCE    "DSL Forum TR-129, paragraph #8.4"
+   DEFVAL       { "DEFVAL" }
+   ::= { xdsl2LineAlarmConfTemplateEntry 3 }
+
+xdsl2LAlarmConfTempChan2ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the DSL
+       Channel Thresholds Configuration Profile Table
+       (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+       channel #2.  The channel profile name specified here MUST match
+       the name of an existing row in the xdsl2ChAlarmConfProfileTable
+       table.  If the channel is unused, then the object is set to a
+       zero-length string."
+   REFERENCE    "DSL Forum TR-129, paragraph #8.4"
+   DEFVAL       { "" }
+   ::= { xdsl2LineAlarmConfTemplateEntry 4 }
+
+xdsl2LAlarmConfTempChan3ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the DSL
+       Channel Thresholds Configuration Profile Table
+       (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+       channel #3.  The channel profile name specified here MUST match
+       the name of an existing row in the xdsl2ChAlarmConfProfileTable
+       table.
+       This object may be set to a non-zero-length string only if
+       xdsl2LAlarmConfTempChan2ConfProfile contains a non-zero-length
+       string."
+   REFERENCE    "DSL Forum TR-129, paragraph #8.4"
+   DEFVAL       { "" }
+   ::= { xdsl2LineAlarmConfTemplateEntry 5 }
+
+xdsl2LAlarmConfTempChan4ConfProfile  OBJECT-TYPE
+   SYNTAX      SnmpAdminString (SIZE(0..32))
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "The value of this object identifies the row in the DSL
+       Channel Thresholds Configuration Profile Table
+       (xdsl2ChAlarmConfProfileTable) that applies for DSL bearer
+       channel #4.  The channel profile name specified here MUST match
+       the name of an existing row in the xdsl2ChAlarmConfProfileTable
+       table.
+
+       This object may be set to a non-zero-length string only if
+       xdsl2LAlarmConfTempChan3ConfProfile contains a non-zero-length
+       string."
+   REFERENCE    "DSL Forum TR-129, paragraph #8.4"
+   DEFVAL       { "" }
+   ::= { xdsl2LineAlarmConfTemplateEntry 6 }
+
+xdsl2LAlarmConfTempRowStatus  OBJECT-TYPE
+   SYNTAX      RowStatus
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       A template is activated by setting this object to 'active'.
+
+       Before a template can be deleted or taken out of service (by
+       setting this object to 'destroy' or 'notInService'), it MUST be
+       first unreferenced from all associated lines.
+
+       A row in this table is said to be unreferenced when there is no
+       instance of xdsl2LineAlarmConfTemplate that refers to the
+       row."
+   ::= { xdsl2LineAlarmConfTemplateEntry 7 }
+
+------------------------------------------------
+--      xdsl2LineAlarmConfProfileTable        --
+------------------------------------------------
+
+xdsl2LineAlarmConfProfileTable  OBJECT-TYPE
+     SYNTAX      SEQUENCE  OF  Xdsl2LineAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "The table xdsl2LineAlarmConfProfileTable contains DSL
+       line performance threshold values.
+
+       If a performance counter exceeds the threshold value specified
+       in this table, then the SNMP agent will issue a threshold trap.
+       Each performance counter has a unique trap type
+       (see NOTIFICATION-TYPE definitions below).
+       One trap will be sent per interval, per interface, per trap type.
+       A value of 0 will disable the trap.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+     ::= { xdsl2ProfileAlarmConf 2 }
+
+xdsl2LineAlarmConfProfileEntry  OBJECT-TYPE
+     SYNTAX      Xdsl2LineAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "A default profile with an index of 'DEFVAL' will always
+       exist, and its parameters will be set to vendor-specific values,
+       unless otherwise specified in this document."
+     INDEX  { xdsl2LineAlarmConfProfileName }
+     ::= { xdsl2LineAlarmConfProfileTable 1 }
+
+Xdsl2LineAlarmConfProfileEntry ::=
+     SEQUENCE {
+     xdsl2LineAlarmConfProfileName                SnmpAdminString,
+     xdsl2LineAlarmConfProfileXtucThresh15MinFecs
+                                          HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXtucThresh15MinEs
+                                          HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXtucThresh15MinSes
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXtucThresh15MinLoss
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXtucThresh15MinUas
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXturThresh15MinFecs
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXturThresh15MinEs
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXturThresh15MinSes
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXturThresh15MinLoss
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileXturThresh15MinUas
+                                           HCPerfIntervalThreshold,
+     xdsl2LineAlarmConfProfileThresh15MinFailedFullInt   Unsigned32,
+     xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt   Unsigned32,
+     xdsl2LineAlarmConfProfileRowStatus                   RowStatus
+     }
+
+xdsl2LineAlarmConfProfileName  OBJECT-TYPE
+     SYNTAX      SnmpAdminString (SIZE(1..32))
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "This object identifies a row in this table."
+     ::= { xdsl2LineAlarmConfProfileEntry 1 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinFecs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MFecs counter, when
+      xdsl2PMLCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 2 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinEs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MEs counter, when
+      xdsl2PMLCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 3 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinSes  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MSes counter, when
+      xdsl2PMLCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 4 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinLoss  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MLoss counter, when
+      xdsl2PMLCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 5 }
+
+xdsl2LineAlarmConfProfileXtucThresh15MinUas  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MUas counter, when
+      xdsl2PMLCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 6 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinFecs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MFecs counter, when
+      xdsl2PMLCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 7 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinEs  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MEs counter, when
+      xdsl2PMLCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 8 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinSes  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MSes counter, when
+      xdsl2PMLCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 9 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinLoss  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MLoss counter, when
+      xdsl2PMLCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 10 }
+
+xdsl2LineAlarmConfProfileXturThresh15MinUas  OBJECT-TYPE
+     SYNTAX      HCPerfIntervalThreshold
+     UNITS       "seconds"
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLCurr15MUas counter, when
+      xdsl2PMLCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 11 }
+
+xdsl2LineAlarmConfProfileThresh15MinFailedFullInt  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLInitCurr15MfailedFullInits
+      counter.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 12 }
+
+xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMLInitCurr15MFailedShortInits
+      counter.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2LineAlarmConfProfileEntry 13 }
+
+xdsl2LineAlarmConfProfileRowStatus  OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       A profile is activated by setting this object to 'active'.
+
+       Before a profile can be deleted or taken out of service (by
+       setting this object to 'destroy' or 'notInService'), it MUST be
+       first unreferenced from all associated templates.
+
+       A row in this table is said to be unreferenced when there is no
+       instance of xdsl2LAlarmConfTempLineProfile that refers to the
+       row."
+     ::= { xdsl2LineAlarmConfProfileEntry 14 }
+
+------------------------------------------------
+--       xdsl2ChAlarmConfProfileTable         --
+------------------------------------------------
+
+xdsl2ChAlarmConfProfileTable  OBJECT-TYPE
+     SYNTAX      SEQUENCE  OF  Xdsl2ChAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "The table xdsl2ChAlarmConfProfileTable contains DSL channel
+       performance threshold values.
+
+       If a performance counter exceeds the threshold value specified
+       in this table, then the SNMP agent will issue a threshold trap.
+       Each performance counter has a unique trap type
+       (see NOTIFICATION-TYPE definitions below).
+       One trap will be sent per interval per interface per trap type.
+       A value of 0 will disable the trap.
+
+       Entries in this table MUST be maintained in a persistent
+       manner."
+     ::= { xdsl2ProfileAlarmConf 3 }
+
+xdsl2ChAlarmConfProfileEntry  OBJECT-TYPE
+     SYNTAX      Xdsl2ChAlarmConfProfileEntry
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+      "A default profile with an index of 'DEFVAL' will always
+       exist, and its parameters will be set to vendor-specific values,
+       unless otherwise specified in this document."
+     INDEX  { xdsl2ChAlarmConfProfileName }
+     ::= { xdsl2ChAlarmConfProfileTable 1 }
+
+Xdsl2ChAlarmConfProfileEntry ::=
+     SEQUENCE {
+     xdsl2ChAlarmConfProfileName
+                                                     SnmpAdminString,
+     xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations
+                                                     Unsigned32,
+     xdsl2ChAlarmConfProfileXtucThresh15MinCorrected Unsigned32,
+     xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations
+                                                     Unsigned32,
+     xdsl2ChAlarmConfProfileXturThresh15MinCorrected Unsigned32,
+     xdsl2ChAlarmConfProfileRowStatus                RowStatus
+     }
+
+xdsl2ChAlarmConfProfileName  OBJECT-TYPE
+     SYNTAX      SnmpAdminString (SIZE(1..32))
+     MAX-ACCESS  not-accessible
+     STATUS      current
+     DESCRIPTION
+     "This object identifies a row in this table."
+     ::= { xdsl2ChAlarmConfProfileEntry 1 }
+
+xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMChCurr15MCodingViolations
+      counter, when xdsl2PMChCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2ChAlarmConfProfileEntry 2 }
+
+xdsl2ChAlarmConfProfileXtucThresh15MinCorrected  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMChCurr15MCorrectedBlocks
+      counter, when xdsl2PMChCurrUnit is xtuc {1}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2ChAlarmConfProfileEntry 3 }
+
+xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMChCurr15MCodingViolations
+      counter, when xdsl2PMChCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2ChAlarmConfProfileEntry 4 }
+
+xdsl2ChAlarmConfProfileXturThresh15MinCorrected  OBJECT-TYPE
+     SYNTAX      Unsigned32
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+     "A threshold for the xdsl2PMChCurr15MCorrectedBlocks
+      counter, when xdsl2PMChCurrUnit is xtur {2}.
+      The value 0 means that no threshold is specified for the
+      associated counter."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.7.2"
+   DEFVAL       { 0 }
+     ::= { xdsl2ChAlarmConfProfileEntry 5 }
+
+xdsl2ChAlarmConfProfileRowStatus  OBJECT-TYPE
+     SYNTAX      RowStatus
+     MAX-ACCESS  read-create
+     STATUS      current
+     DESCRIPTION
+      "This object is used to create a new row or to modify or
+       delete an existing row in this table.
+
+       A profile is activated by setting this object to 'active'.
+
+       Before a profile can be deleted or taken out of service (by
+       setting this object to 'destroy' or 'notInService'), it MUST be
+       first unreferenced from all associated templates.
+
+       A row in xdsl2ChConfProfTable is said to be unreferenced when
+       there is no instance of xdsl2LAlarmConfTempChan1ConfProfile,
+       xdsl2LAlarmConfTempChan2ConfProfile,
+       xdsl2LAlarmConfTempChan3ConfProfile, or
+       xdsl2LAlarmConfTempChan4ConfProfile that refers to
+       the row."
+     ::= { xdsl2ChAlarmConfProfileEntry 6 }
+
+------------------------------------------------
+--          PM line current counters          --
+------------------------------------------------
+
+xdsl2PMLineCurrTable  OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMLineCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMLineCurrTable contains current Performance
+       Monitoring results for DSL lines."
+   ::= { xdsl2PMLine 1 }
+
+xdsl2PMLineCurrEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMLineCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+        interface has an ifType of vdsl2(251).  A second index of this
+        table is the termination unit."
+   INDEX  { ifIndex, xdsl2PMLCurrUnit }
+   ::= { xdsl2PMLineCurrTable 1 }
+
+Xdsl2PMLineCurrEntry  ::=
+   SEQUENCE {
+      xdsl2PMLCurrUnit                    Xdsl2Unit,
+      xdsl2PMLCurr15MValidIntervals       Unsigned32,
+      xdsl2PMLCurr15MInvalidIntervals     Unsigned32,
+      xdsl2PMLCurr15MTimeElapsed          HCPerfTimeElapsed,
+      xdsl2PMLCurr15MFecs                 Counter32,
+      xdsl2PMLCurr15MEs                   Counter32,
+      xdsl2PMLCurr15MSes                  Counter32,
+      xdsl2PMLCurr15MLoss                 Counter32,
+      xdsl2PMLCurr15MUas                  Counter32,
+      xdsl2PMLCurr1DayValidIntervals      Unsigned32,
+      xdsl2PMLCurr1DayInvalidIntervals    Unsigned32,
+      xdsl2PMLCurr1DayTimeElapsed         HCPerfTimeElapsed,
+      xdsl2PMLCurr1DayFecs                Counter32,
+      xdsl2PMLCurr1DayEs                  Counter32,
+      xdsl2PMLCurr1DaySes                 Counter32,
+      xdsl2PMLCurr1DayLoss                Counter32,
+      xdsl2PMLCurr1DayUas                 Counter32
+   }
+
+xdsl2PMLCurrUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { xdsl2PMLineCurrEntry 1 }
+
+xdsl2PMLCurr15MValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 15-minute PM intervals for which data
+       was collected.  The value will typically be equal to the maximum
+       number of 15-minute intervals the implementation is planned to
+       store (i.e., beyond the scope of this MIB module) unless the
+       measurement was (re-)started recently, in which case the value
+       will be the number of complete 15-minute intervals for which
+       the agent has at least some data.  In certain cases (e.g., in
+       the case where the agent is a proxy), it is possible that some
+       intervals are unavailable.  In this case, this interval is the
+       maximum interval number for which data is available."
+   ::= { xdsl2PMLineCurrEntry 2 }
+
+xdsl2PMLCurr15MInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 15-minute PM intervals for which no data is
+       available.  The value will typically be zero except in cases
+       where the data for some intervals are not available (e.g.,
+       in proxy situations)."
+   ::= { xdsl2PMLineCurrEntry 3 }
+
+xdsl2PMLCurr15MTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds in this interval."
+   ::= { xdsl2PMLineCurrEntry 4 }
+
+xdsl2PMLCurr15MFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was at
+       least one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+                 and paragraph #7.2.1.2.1 (FECS-LFE)"
+   ::= { xdsl2PMLineCurrEntry 5 }
+
+xdsl2PMLCurr15MEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >=1 OR LPR >= 1.
+          xTU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+                 and paragraph #7.2.1.2.2 (ES-LFE)"
+   ::= { xdsl2PMLineCurrEntry 6 }
+
+xdsl2PMLCurr15MSes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: (CRC-8 anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS >= 1
+                 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: (FEBE anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS-FE >= 1
+                 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+                 and paragraph #7.2.1.2.3 (SES-LFE)"
+   ::= { xdsl2PMLineCurrEntry 7 }
+
+xdsl2PMLCurr15MLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was LOS (or
+       LOS-FE for xTU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+                 and paragraph #7.2.1.2.4 (LOSS-LFE)"
+   ::= { xdsl2PMLineCurrEntry 8 }
+
+xdsl2PMLCurr15MUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this
+       interval.  Unavailability begins at the onset of 10 contiguous
+       severely errored seconds, and ends at the onset of 10 contiguous
+       seconds with no severely errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+                 and paragraph #7.2.1.2.5 (UAS-LFE)"
+   ::= { xdsl2PMLineCurrEntry 9 }
+
+xdsl2PMLCurr1DayValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 24-hour PM intervals for which data was
+       collected.  The value will typically be equal to the maximum
+       number of 24-hour intervals the implementation is planned to
+       store (i.e., beyond the scope of this MIB module) unless the
+       measurement was (re-)started recently, in which case the value
+       will be the number of complete 24-hour intervals for which
+       the agent has at least some data.  In certain cases (e.g., in
+       the case where the agent is a proxy), it is possible that some
+       intervals are unavailable.  In this case, this interval is the
+       maximum interval number for which data is available."
+   ::= { xdsl2PMLineCurrEntry 10 }
+
+xdsl2PMLCurr1DayInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 24-hour PM intervals for which no data is
+       available.  The value will typically be zero except in cases
+       where the data for some intervals are not available (e.g.,
+       in proxy situations)."
+   ::= { xdsl2PMLineCurrEntry 11 }
+
+xdsl2PMLCurr1DayTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds in this interval."
+   ::= { xdsl2PMLineCurrEntry 12 }
+
+xdsl2PMLCurr1DayFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was at
+       least one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+                 and paragraph #7.2.1.2.1 (FECS-LFE)"
+   ::= { xdsl2PMLineCurrEntry 13 }
+
+xdsl2PMLCurr1DayEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+                 and paragraph #7.2.1.2.2 (ES-LFE)"
+   ::= { xdsl2PMLineCurrEntry 14 }
+
+xdsl2PMLCurr1DaySes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: (CRC-8 anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS >= 1
+                 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: (FEBE anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS-FE >= 1.
+                 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+                 and paragraph #7.2.1.2.3 (SES-LFE)"
+   ::= { xdsl2PMLineCurrEntry 15 }
+
+xdsl2PMLCurr1DayLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was LOS (or
+       LOS-FE for xTU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+                 and paragraph #7.2.1.2.4 (LOSS-LFE)"
+   ::= { xdsl2PMLineCurrEntry 16 }
+
+xdsl2PMLCurr1DayUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this
+       interval.
+       Unavailability begins at the onset of 10 contiguous severely
+       errored seconds, and ends at the onset of 10 contiguous seconds
+       with no severely errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+                 and paragraph #7.2.1.2.5 (UAS-LFE)"
+   ::= { xdsl2PMLineCurrEntry 17 }
+
+------------------------------------------------
+--          PM line init current counters     --
+------------------------------------------------
+
+xdsl2PMLineInitCurrTable   OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMLineInitCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMLineInitCurrTable contains current
+       initialization counters for DSL lines."
+   ::= { xdsl2PMLine 2 }
+
+xdsl2PMLineInitCurrEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMLineInitCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The index of this table is an interface index where the
+       interface has an ifType of vdsl2(251)."
+   INDEX  { ifIndex }
+   ::= { xdsl2PMLineInitCurrTable 1 }
+
+Xdsl2PMLineInitCurrEntry  ::=
+   SEQUENCE {
+      xdsl2PMLInitCurr15MValidIntervals       Unsigned32,
+      xdsl2PMLInitCurr15MInvalidIntervals     Unsigned32,
+      xdsl2PMLInitCurr15MTimeElapsed          Unsigned32,
+      xdsl2PMLInitCurr15MFullInits            Unsigned32,
+      xdsl2PMLInitCurr15MFailedFullInits      Unsigned32,
+      xdsl2PMLInitCurr15MShortInits           Unsigned32,
+      xdsl2PMLInitCurr15MFailedShortInits     Unsigned32,
+      xdsl2PMLInitCurr1DayValidIntervals      Unsigned32,
+      xdsl2PMLInitCurr1DayInvalidIntervals    Unsigned32,
+      xdsl2PMLInitCurr1DayTimeElapsed         Unsigned32,
+      xdsl2PMLInitCurr1DayFullInits           Unsigned32,
+      xdsl2PMLInitCurr1DayFailedFullInits     Unsigned32,
+      xdsl2PMLInitCurr1DayShortInits          Unsigned32,
+      xdsl2PMLInitCurr1DayFailedShortInits    Unsigned32
+   }
+
+xdsl2PMLInitCurr15MValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 15-minute PM intervals for which data
+       was collected.  The value will typically be equal to the maximum
+       number of 15-minute intervals the implementation is planned to
+       store (i.e., beyond the scope of this MIB module) unless the
+       measurement was (re-)started recently, in which case the value
+       will be the number of complete 15-minute intervals for which
+       the agent has at least some data.  In certain cases (e.g., in
+       the case where the agent is a proxy), it is possible that some
+       intervals are unavailable.  In this case, this interval is the
+       maximum interval number for which data is available."
+   ::= { xdsl2PMLineInitCurrEntry 1 }
+
+xdsl2PMLInitCurr15MInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 15-minute PM intervals for which no data is
+       available.  The value will typically be zero except in cases
+       where the data for some intervals are not available (e.g.,
+       in proxy situations)."
+   ::= { xdsl2PMLineInitCurrEntry 2 }
+
+xdsl2PMLInitCurr15MTimeElapsed  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds in this interval."
+   ::= { xdsl2PMLineInitCurrEntry 3 }
+
+xdsl2PMLInitCurr15MFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.1"
+   ::= { xdsl2PMLineInitCurrEntry 4 }
+
+xdsl2PMLInitCurr15MFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.2"
+   ::= { xdsl2PMLineInitCurrEntry 5 }
+
+xdsl2PMLInitCurr15MShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.3"
+   ::= { xdsl2PMLineInitCurrEntry 6 }
+
+xdsl2PMLInitCurr15MFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during
+       this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.4"
+   ::= { xdsl2PMLineInitCurrEntry 7 }
+
+xdsl2PMLInitCurr1DayValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 24-hour PM intervals for which data was
+       collected.  The value will typically be equal to the maximum
+       number of 24-hour intervals the implementation is planned to
+       store (i.e., beyond the scope of this MIB module) unless the
+       measurement was (re-)started recently, in which case the value
+       will be the number of complete 24-hour intervals for which
+       the agent has at least some data.  In certain cases (e.g., in
+       the case where the agent is a proxy), it is possible that some
+       intervals are unavailable.  In this case, this interval is the
+       maximum interval number for which data is available."
+   ::= { xdsl2PMLineInitCurrEntry 8 }
+
+xdsl2PMLInitCurr1DayInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 24-hour PM intervals for which no data is
+       available.  The value will typically be zero except in cases
+       where the data for some intervals are not available (e.g.,
+       in proxy situations)."
+   ::= { xdsl2PMLineInitCurrEntry 9 }
+
+xdsl2PMLInitCurr1DayTimeElapsed  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds in this interval."
+   ::= { xdsl2PMLineInitCurrEntry 10 }
+
+xdsl2PMLInitCurr1DayFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.1"
+   ::= { xdsl2PMLineInitCurrEntry 11 }
+
+xdsl2PMLInitCurr1DayFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.2"
+   ::= { xdsl2PMLineInitCurrEntry 12 }
+
+xdsl2PMLInitCurr1DayShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.3"
+   ::= { xdsl2PMLineInitCurrEntry 13 }
+
+xdsl2PMLInitCurr1DayFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during
+       this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.4"
+   ::= { xdsl2PMLineInitCurrEntry 14 }
+
+-------------------------------------------
+--       PM line history 15 Minutes      --
+-------------------------------------------
+
+xdsl2PMLineHist15MinTable    OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMLineHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMLineHist15MinTable contains PM line history
+       for 15-minute intervals of DSL line."
+   ::= { xdsl2PMLine 3 }
+
+xdsl2PMLineHist15MinEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMLineHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "One index of this table is an interface index where the
+      interface has an ifType of vdsl2(251).  A second index of this
+      table is the transmission unit.  The third index is the interval
+      number."
+   INDEX  { ifIndex,
+            xdsl2PMLHist15MUnit,
+            xdsl2PMLHist15MInterval }
+   ::= { xdsl2PMLineHist15MinTable 1 }
+
+Xdsl2PMLineHist15MinEntry  ::=
+   SEQUENCE {
+      xdsl2PMLHist15MUnit                 Xdsl2Unit,
+      xdsl2PMLHist15MInterval             Unsigned32,
+      xdsl2PMLHist15MMonitoredTime        Unsigned32,
+      xdsl2PMLHist15MFecs                 Counter32,
+      xdsl2PMLHist15MEs                   Counter32,
+      xdsl2PMLHist15MSes                  Counter32,
+      xdsl2PMLHist15MLoss                 Counter32,
+      xdsl2PMLHist15MUas                  Counter32,
+      xdsl2PMLHist15MValidInterval        TruthValue
+   }
+
+xdsl2PMLHist15MUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { xdsl2PMLineHist15MinEntry 1 }
+
+xdsl2PMLHist15MInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { xdsl2PMLineHist15MinEntry 2 }
+
+xdsl2PMLHist15MMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { xdsl2PMLineHist15MinEntry 3 }
+
+xdsl2PMLHist15MFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was at
+       least one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+                 and paragraph #7.2.1.2.1 (FECS-LFE)"
+   ::= { xdsl2PMLineHist15MinEntry 4 }
+
+xdsl2PMLHist15MEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+                 and paragraph #7.2.1.2.2 (ES-LFE)"
+   ::= { xdsl2PMLineHist15MinEntry 5 }
+
+xdsl2PMLHist15MSes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: (CRC-8 anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS >= 1
+                 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: (FEBE anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS-FE >= 1
+                 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+                 and paragraph #7.2.1.2.3 (SES-LFE)"
+   ::= { xdsl2PMLineHist15MinEntry 6 }
+
+xdsl2PMLHist15MLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was LOS (or
+       LOS-FE for xTU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+                 and paragraph #7.2.1.2.4 (LOSS-LFE)"
+   ::= { xdsl2PMLineHist15MinEntry 7 }
+
+xdsl2PMLHist15MUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this
+       interval.
+       Unavailability begins at the onset of 10 contiguous severely
+       errored seconds, and ends at the onset of 10 contiguous seconds
+       with no severely errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+                 and paragraph #7.2.1.2.5 (UAS-LFE)"
+   ::= { xdsl2PMLineHist15MinEntry 8 }
+
+xdsl2PMLHist15MValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { xdsl2PMLineHist15MinEntry 9 }
+
+---------------------------------------
+--       PM line history 1 Day       --
+---------------------------------------
+
+xdsl2PMLineHist1DayTable     OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMLineHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMLineHist1DayTable contains PM line history
+       for 24-hour intervals of DSL line."
+   ::= { xdsl2PMLine 4 }
+
+xdsl2PMLineHist1DayEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMLineHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "One index of this table is an interface index where the
+      interface has an ifType of vdsl2(251).  A second index of this
+      table is the transmission unit.The third index is the interval
+      number."
+   INDEX  { ifIndex,
+            xdsl2PMLHist1DUnit,
+            xdsl2PMLHist1DInterval }
+   ::= { xdsl2PMLineHist1DayTable 1 }
+
+Xdsl2PMLineHist1DayEntry  ::=
+   SEQUENCE {
+      xdsl2PMLHist1DUnit              Xdsl2Unit,
+      xdsl2PMLHist1DInterval          Unsigned32,
+      xdsl2PMLHist1DMonitoredTime     Unsigned32,
+      xdsl2PMLHist1DFecs              Counter32,
+      xdsl2PMLHist1DEs                Counter32,
+      xdsl2PMLHist1DSes               Counter32,
+      xdsl2PMLHist1DLoss              Counter32,
+      xdsl2PMLHist1DUas               Counter32,
+      xdsl2PMLHist1DValidInterval     TruthValue
+   }
+
+xdsl2PMLHist1DUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { xdsl2PMLineHist1DayEntry 1 }
+
+xdsl2PMLHist1DInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { xdsl2PMLineHist1DayEntry 2 }
+
+xdsl2PMLHist1DMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { xdsl2PMLineHist1DayEntry 3 }
+
+xdsl2PMLHist1DFecs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was at
+       least one FEC correction event for one or more bearer channels in
+       this line.  This parameter is inhibited during UAS or SES."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.1 (FECS-L)
+                 and paragraph #7.2.1.2.1 (FECS-LFE)"
+   ::= { xdsl2PMLineHist1DayEntry 4 }
+
+xdsl2PMLHist1DEs  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: CRC-8 >= 1 for one or more bearer channels OR
+                 LOS >= 1 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: FEBE >= 1 for one or more bearer channels OR
+                 LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.2 (ES-L)
+                 and paragraph #7.2.1.2.2 (ES-LFE)"
+   ::= { xdsl2PMLineHist1DayEntry 5 }
+
+xdsl2PMLHist1DSes  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was:
+          xTU-C: (CRC-8 anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS >= 1
+                 OR SEF >= 1 OR LPR >= 1.
+          xTU-R: (FEBE anomalies in one or more of the
+                 received bearer channels) >= 18 OR LOS-FE >= 1
+                 OR RDI >= 1 OR LPR-FE >= 1.
+       This parameter is inhibited during UAS."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.3 (SES-L)
+                 and paragraph #7.2.1.2.3 (SES-LFE)"
+   ::= { xdsl2PMLineHist1DayEntry 6 }
+
+xdsl2PMLHist1DLoss  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds during this interval that there was LOS (or
+       LOS-FE for xTU-R)."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.4 (LOSS-L)
+                 and paragraph #7.2.1.2.4 (LOSS-LFE)"
+   ::= { xdsl2PMLineHist1DayEntry 7 }
+
+xdsl2PMLHist1DUas  OBJECT-TYPE
+   SYNTAX      Counter32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of seconds in Unavailability State during this
+       interval.
+       Unavailability begins at the onset of 10 contiguous severely
+       errored seconds, and ends at the onset of 10 contiguous seconds
+       with no severely errored seconds."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.1.5 (UAS-L)
+                 and paragraph #7.2.1.2.5 (UAS-LFE)"
+   ::= { xdsl2PMLineHist1DayEntry 8 }
+
+xdsl2PMLHist1DValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { xdsl2PMLineHist1DayEntry 9 }
+
+-------------------------------------------
+--     PM line init history 15 Minutes   --
+-------------------------------------------
+
+xdsl2PMLineInitHist15MinTable      OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMLineInitHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMLineInitHist15MinTable contains PM line
+       initialization history for 15-minute intervals of DSL
+       line."
+   ::= { xdsl2PMLine 5 }
+
+xdsl2PMLineInitHist15MinEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMLineInitHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+        interface has an ifType of vdsl2(251).  A second index is the
+        interval number."
+   INDEX  { ifIndex,
+            xdsl2PMLInitHist15MInterval }
+   ::= { xdsl2PMLineInitHist15MinTable 1 }
+
+Xdsl2PMLineInitHist15MinEntry  ::=
+   SEQUENCE {
+      xdsl2PMLInitHist15MInterval              Unsigned32,
+      xdsl2PMLInitHist15MMonitoredTime         Unsigned32,
+      xdsl2PMLInitHist15MFullInits             Unsigned32,
+      xdsl2PMLInitHist15MFailedFullInits       Unsigned32,
+      xdsl2PMLInitHist15MShortInits            Unsigned32,
+      xdsl2PMLInitHist15MFailedShortInits      Unsigned32,
+      xdsl2PMLInitHist15MValidInterval         TruthValue
+   }
+
+xdsl2PMLInitHist15MInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { xdsl2PMLineInitHist15MinEntry 1 }
+
+xdsl2PMLInitHist15MMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { xdsl2PMLineInitHist15MinEntry 2 }
+
+xdsl2PMLInitHist15MFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.1"
+   ::= { xdsl2PMLineInitHist15MinEntry 3 }
+
+xdsl2PMLInitHist15MFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.2"
+   ::= { xdsl2PMLineInitHist15MinEntry 4 }
+
+xdsl2PMLInitHist15MShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.3"
+   ::= { xdsl2PMLineInitHist15MinEntry 5 }
+
+xdsl2PMLInitHist15MFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during
+       this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.4"
+   ::= { xdsl2PMLineInitHist15MinEntry 6 }
+
+xdsl2PMLInitHist15MValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { xdsl2PMLineInitHist15MinEntry 7 }
+
+-------------------------------------------
+--       PM line init history 1 Day      --
+-------------------------------------------
+
+xdsl2PMLineInitHist1DayTable       OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMLineInitHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMLineInitHist1DayTable contains PM line
+       initialization history for 24-hour intervals for DSL
+       lines."
+   ::= { xdsl2PMLine 6 }
+
+xdsl2PMLineInitHist1DayEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMLineInitHist1DayEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+        interface has an ifType of vdsl2(251).  A second index is the
+        interval number."
+   INDEX  { ifIndex,
+            xdsl2PMLInitHist1DInterval }
+   ::= { xdsl2PMLineInitHist1DayTable 1 }
+
+Xdsl2PMLineInitHist1DayEntry  ::=
+   SEQUENCE {
+      xdsl2PMLInitHist1DInterval              Unsigned32,
+      xdsl2PMLInitHist1DMonitoredTime         Unsigned32,
+      xdsl2PMLInitHist1DFullInits             Unsigned32,
+      xdsl2PMLInitHist1DFailedFullInits       Unsigned32,
+      xdsl2PMLInitHist1DShortInits            Unsigned32,
+      xdsl2PMLInitHist1DFailedShortInits      Unsigned32,
+      xdsl2PMLInitHist1DValidInterval         TruthValue
+   }
+
+xdsl2PMLInitHist1DInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { xdsl2PMLineInitHist1DayEntry 1 }
+
+xdsl2PMLInitHist1DMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { xdsl2PMLineInitHist1DayEntry 2 }
+
+xdsl2PMLInitHist1DFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of full initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.1"
+    ::= { xdsl2PMLineInitHist1DayEntry 3 }
+
+xdsl2PMLInitHist1DFailedFullInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed full initializations on the line during this
+       interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.2"
+   ::= { xdsl2PMLineInitHist1DayEntry 4 }
+
+xdsl2PMLInitHist1DShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of short initializations attempted on the line
+       (successful and failed) during this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.3"
+   ::= { xdsl2PMLineInitHist1DayEntry 5 }
+
+xdsl2PMLInitHist1DFailedShortInits  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of failed short initializations on the line during
+       this interval."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.1.3.4"
+   ::= { xdsl2PMLineInitHist1DayEntry 6 }
+
+xdsl2PMLInitHist1DValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { xdsl2PMLineInitHist1DayEntry 7 }
+
+---------------------------------------------------
+--          PM channel current counters          --
+---------------------------------------------------
+
+xdsl2PMChCurrTable        OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMChCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMChCurrTable contains current Performance
+       Monitoring results for DSL channels."
+   ::= { xdsl2PMChannel 1 }
+
+xdsl2PMChCurrEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMChCurrEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+       "One index of this table is an interface index where the
+       interface has an ifType of a DSL channel.  A second index of
+       this table is the termination unit."
+   INDEX  { ifIndex, xdsl2PMChCurrUnit }
+   ::= { xdsl2PMChCurrTable 1 }
+
+Xdsl2PMChCurrEntry  ::=
+   SEQUENCE {
+      xdsl2PMChCurrUnit                     Xdsl2Unit,
+      xdsl2PMChCurr15MValidIntervals        Unsigned32,
+      xdsl2PMChCurr15MInvalidIntervals      Unsigned32,
+      xdsl2PMChCurr15MTimeElapsed           HCPerfTimeElapsed,
+      xdsl2PMChCurr15MCodingViolations      Unsigned32,
+      xdsl2PMChCurr15MCorrectedBlocks       Unsigned32,
+      xdsl2PMChCurr1DayValidIntervals       Unsigned32,
+      xdsl2PMChCurr1DayInvalidIntervals     Unsigned32,
+      xdsl2PMChCurr1DayTimeElapsed          HCPerfTimeElapsed,
+      xdsl2PMChCurr1DayCodingViolations     Unsigned32,
+      xdsl2PMChCurr1DayCorrectedBlocks      Unsigned32
+   }
+
+xdsl2PMChCurrUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+   "The termination unit."
+   ::= { xdsl2PMChCurrEntry 1 }
+
+xdsl2PMChCurr15MValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 15-minute PM intervals for which data
+       was collected.  The value will typically be equal to the maximum
+       number of 15-minute intervals the implementation is planned to
+       store (i.e., beyond the scope of this MIB module) unless the
+       measurement was (re-)started recently, in which case the value
+       will be the number of complete 15-minute intervals for which
+       the agent has at least some data.  In certain cases (e.g., in
+       the case where the agent is a proxy), it is possible that some
+       intervals are unavailable.  In this case, this interval is the
+
+       maximum interval number for which data is available."
+   ::= { xdsl2PMChCurrEntry 2 }
+
+xdsl2PMChCurr15MInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..96)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 15-minute PM intervals for which no data is
+       available.  The value will typically be zero except in cases
+       where the data for some intervals are not available (e.g.,
+       in proxy situations)."
+    ::= { xdsl2PMChCurrEntry 3 }
+
+xdsl2PMChCurr15MTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds in this interval."
+   ::= { xdsl2PMChCurrEntry 4 }
+
+xdsl2PMChCurr15MCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited during
+       UAS or SES.  If the CRC is applied over multiple channels, then
+       each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+       counters related to the individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+                 and paragraph #7.2.2.2.1 (CV-CFE)"
+  ::= { xdsl2PMChCurrEntry 5 }
+
+xdsl2PMChCurr15MCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+       words) occurring in the channel during the interval.  This
+       parameter is inhibited during UAS or SES.  If the FEC is applied
+       over multiple channels, then each related FEC (or FFEC) anomaly
+       SHOULD increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+                 and paragraph #7.2.2.2.2 (FEC-CFE)"
+   ::= { xdsl2PMChCurrEntry 6 }
+
+xdsl2PMChCurr1DayValidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 24-hour PM intervals for which data was
+       collected.  The value will typically be equal to the maximum
+       number of 24-hour intervals the implementation is planned to
+       store (i.e., beyond the scope of this MIB module) unless the
+       measurement was (re-)started recently, in which case the value
+       will be the number of complete 24-hour intervals for which
+       the agent has at least some data.  In certain cases (e.g., in
+       the case where the agent is a proxy), it is possible that some
+       intervals are unavailable.  In this case, this interval is the
+       maximum interval number for which data is available."
+   ::= { xdsl2PMChCurrEntry 7 }
+
+xdsl2PMChCurr1DayInvalidIntervals  OBJECT-TYPE
+   SYNTAX      Unsigned32 (0..30)
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of 24-hour PM intervals for which no data is
+       available.  The value will typically be zero except in cases
+       where the data for some intervals are not available (e.g.,
+       in proxy situations)."
+   ::= { xdsl2PMChCurrEntry 8 }
+
+xdsl2PMChCurr1DayTimeElapsed  OBJECT-TYPE
+   SYNTAX      HCPerfTimeElapsed
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total elapsed seconds in this interval."
+   ::= { xdsl2PMChCurrEntry 9 }
+
+xdsl2PMChCurr1DayCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited during
+
+       UAS or SES.  If the CRC is applied over multiple channels, then
+       each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+       counters related to the individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+                 and paragraph #7.2.2.2.1 (CV-CFE)"
+   ::= { xdsl2PMChCurrEntry 10 }
+
+xdsl2PMChCurr1DayCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+       words) occurring in the channel during the interval.  This
+       parameter is inhibited during UAS or SES.  If the FEC is applied
+       over multiple channels, then each related FEC (or FFEC) anomaly
+       SHOULD increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+                 and paragraph #7.2.2.2.2 (FEC-CFE)"
+   ::= { xdsl2PMChCurrEntry 11 }
+
+-------------------------------------------
+--    PM channel history 15 Minutes      --
+-------------------------------------------
+
+xdsl2PMChHist15MinTable         OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMChHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMChHist15MinTable contains Performance
+       Monitoring (PM) history for 15-minute intervals for DSL channels
+       PM."
+   ::= { xdsl2PMChannel 2 }
+
+xdsl2PMChHist15MinEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMChHist15MinEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "One index of this table is an interface index where the
+       interface has an ifType of a DSL channel.  A second index of
+       this table is the transmission unit.  The third index is the
+       interval number."
+   INDEX  { ifIndex,
+            xdsl2PMChHist15MUnit,
+            xdsl2PMChHist15MInterval }
+   ::= { xdsl2PMChHist15MinTable 1 }
+
+Xdsl2PMChHist15MinEntry  ::=
+   SEQUENCE {
+      xdsl2PMChHist15MUnit                     Xdsl2Unit,
+      xdsl2PMChHist15MInterval                 Unsigned32,
+      xdsl2PMChHist15MMonitoredTime            Unsigned32,
+      xdsl2PMChHist15MCodingViolations         Unsigned32,
+      xdsl2PMChHist15MCorrectedBlocks          Unsigned32,
+      xdsl2PMChHist15MValidInterval            TruthValue
+   }
+
+xdsl2PMChHist15MUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+   ::= { xdsl2PMChHist15MinEntry 1 }
+
+xdsl2PMChHist15MInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..96)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { xdsl2PMChHist15MinEntry 2 }
+
+xdsl2PMChHist15MMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { xdsl2PMChHist15MinEntry 3 }
+
+xdsl2PMChHist15MCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+       channel during the interval.  This parameter is inhibited during
+       UAS or SES.  If the CRC is applied over multiple channels, then
+       each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+       counters related to the individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+
+                 and paragraph #7.2.2.2.1 (CV-CFE)"
+  ::= { xdsl2PMChHist15MinEntry 4 }
+
+xdsl2PMChHist15MCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+       words) occurring in the channel during the interval.  This
+       parameter is inhibited during UAS or SES.  If the FEC is applied
+       over multiple channels, then each related FEC (or FFEC) anomaly
+       SHOULD increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+                 and paragraph #7.2.2.2.2 (FEC-CFE)"
+   ::= { xdsl2PMChHist15MinEntry 5 }
+
+xdsl2PMChHist15MValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { xdsl2PMChHist15MinEntry 6 }
+
+------------------------------------------
+--        PM channel history 1 Day      --
+------------------------------------------
+
+xdsl2PMChHist1DTable         OBJECT-TYPE
+   SYNTAX      SEQUENCE  OF  Xdsl2PMChHist1DEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The table xdsl2PMChHist1DTable contains Performance
+       Monitoring (PM) history for 1-day intervals for DSL channels
+       PM."
+   ::= { xdsl2PMChannel 3 }
+
+xdsl2PMChHist1DEntry  OBJECT-TYPE
+   SYNTAX      Xdsl2PMChHist1DEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "One index of this table is an interface index where the
+       interface has an ifType of a DSL channel.  A second index of
+
+       this table is the transmission unit.  The third index is the
+       interval number."
+   INDEX  { ifIndex,
+            xdsl2PMChHist1DUnit,
+            xdsl2PMChHist1DInterval }
+   ::= { xdsl2PMChHist1DTable 1 }
+
+Xdsl2PMChHist1DEntry  ::=
+   SEQUENCE {
+      xdsl2PMChHist1DUnit                      Xdsl2Unit,
+      xdsl2PMChHist1DInterval                  Unsigned32,
+      xdsl2PMChHist1DMonitoredTime             Unsigned32,
+      xdsl2PMChHist1DCodingViolations          Unsigned32,
+      xdsl2PMChHist1DCorrectedBlocks           Unsigned32,
+      xdsl2PMChHist1DValidInterval             TruthValue
+   }
+
+xdsl2PMChHist1DUnit  OBJECT-TYPE
+   SYNTAX      Xdsl2Unit
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The termination unit."
+    ::= { xdsl2PMChHist1DEntry 1 }
+
+xdsl2PMChHist1DInterval  OBJECT-TYPE
+   SYNTAX      Unsigned32 (1..30)
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "The interval number."
+   ::= { xdsl2PMChHist1DEntry 2 }
+
+xdsl2PMChHist1DMonitoredTime  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   UNITS       "seconds"
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Total seconds monitored in this interval."
+   ::= { xdsl2PMChHist1DEntry 3 }
+
+xdsl2PMChHist1DCodingViolations  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
+
+       channel during the interval.  This parameter is inhibited during
+       UAS or SES.  If the CRC is applied over multiple channels, then
+       each related CRC-8 (or FEBE) anomaly SHOULD increment each of the
+       counters related to the individual channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.1 (CV-C)
+                 and paragraph #7.2.2.2.1 (CV-CFE)"
+   ::= { xdsl2PMChHist1DEntry 4 }
+
+xdsl2PMChHist1DCorrectedBlocks  OBJECT-TYPE
+   SYNTAX      Unsigned32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "Count of FEC (FFEC for xTU-R) anomalies (corrected code
+       words) occurring in the channel during the interval.  This
+       parameter is inhibited during UAS or SES.  If the FEC is applied
+       over multiple channels, then each related FEC (or FFEC) anomaly
+       SHOULD increment each of the counters related to the individual
+       channels."
+   REFERENCE    "ITU-T G.997.1, paragraph #7.2.2.1.2 (FEC-C)
+                 and paragraph #7.2.2.2.2 (FEC-CFE)"
+   ::= { xdsl2PMChHist1DEntry 5 }
+
+xdsl2PMChHist1DValidInterval  OBJECT-TYPE
+   SYNTAX      TruthValue
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "This variable indicates if the data for this interval is
+       valid."
+   ::= { xdsl2PMChHist1DEntry 6 }
+
+-------------------------------------------
+--          Notifications Group          --
+-------------------------------------------
+
+xdsl2LinePerfFECSThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MFecs,
+   xdsl2LineAlarmConfProfileXtucThresh15MinFecs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the FEC seconds threshold
+      has been reached/exceeded for the referred xTU-C."
+   ::= { xdsl2Notifications 1 }
+
+xdsl2LinePerfFECSThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MFecs,
+   xdsl2LineAlarmConfProfileXturThresh15MinFecs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the FEC seconds threshold
+      has been reached/exceeded for the referred xTU-R."
+   ::= { xdsl2Notifications 2 }
+
+xdsl2LinePerfESThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MEs,
+   xdsl2LineAlarmConfProfileXtucThresh15MinEs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the errored seconds
+      threshold has been reached/exceeded for the referred xTU-C."
+   ::= { xdsl2Notifications 3 }
+
+xdsl2LinePerfESThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MEs,
+   xdsl2LineAlarmConfProfileXturThresh15MinEs
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the errored seconds
+      threshold has been reached/exceeded for the referred xTU-R."
+   ::= { xdsl2Notifications 4 }
+
+xdsl2LinePerfSESThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MSes,
+   xdsl2LineAlarmConfProfileXtucThresh15MinSes
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the severely errored seconds
+      threshold has been reached/exceeded for the referred xTU-C."
+   ::= { xdsl2Notifications 5 }
+
+xdsl2LinePerfSESThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MSes,
+   xdsl2LineAlarmConfProfileXturThresh15MinSes
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the severely errored seconds
+      threshold has been reached/exceeded for the referred xTU-R."
+   ::= { xdsl2Notifications 6 }
+
+xdsl2LinePerfLOSSThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MLoss,
+   xdsl2LineAlarmConfProfileXtucThresh15MinLoss
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the LOS seconds
+      threshold has been reached/exceeded for the referred xTU-C."
+   ::= { xdsl2Notifications 7 }
+
+xdsl2LinePerfLOSSThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MLoss,
+   xdsl2LineAlarmConfProfileXturThresh15MinLoss
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the LOS seconds
+      threshold has been reached/exceeded for the referred xTU-R."
+   ::= { xdsl2Notifications 8 }
+
+xdsl2LinePerfUASThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MUas,
+   xdsl2LineAlarmConfProfileXtucThresh15MinUas
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the unavailable seconds
+      threshold has been reached/exceeded for the referred xTU-C."
+   ::= { xdsl2Notifications 9 }
+
+xdsl2LinePerfUASThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLCurr15MUas,
+   xdsl2LineAlarmConfProfileXturThresh15MinUas
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the unavailable seconds
+      threshold has been reached/exceeded for the referred xTU-R."
+   ::= { xdsl2Notifications 10 }
+
+xdsl2LinePerfCodingViolationsThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMChCurr15MCodingViolations,
+   xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the coding violations
+      threshold has been reached/exceeded for the referred xTU-C."
+   ::= { xdsl2Notifications 11 }
+
+xdsl2LinePerfCodingViolationsThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMChCurr15MCodingViolations,
+   xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the coding violations
+      threshold has been reached/exceeded for the referred xTU-R."
+   ::= { xdsl2Notifications 12 }
+
+xdsl2LinePerfCorrectedThreshXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMChCurr15MCorrectedBlocks,
+   xdsl2ChAlarmConfProfileXtucThresh15MinCorrected
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the corrected blocks
+      (FEC events) threshold has been reached/exceeded for the
+      referred xTU-C."
+   ::= { xdsl2Notifications 13 }
+
+xdsl2LinePerfCorrectedThreshXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMChCurr15MCorrectedBlocks,
+   xdsl2ChAlarmConfProfileXturThresh15MinCorrected
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the corrected blocks
+      (FEC events) threshold has been reached/exceeded for the
+      referred xTU-R."
+   ::= { xdsl2Notifications 14 }
+
+xdsl2LinePerfFailedFullInitThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLInitCurr15MFailedFullInits,
+   xdsl2LineAlarmConfProfileThresh15MinFailedFullInt
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the failed full
+      initializations threshold has been reached/exceeded for the
+      referred ADSL/ADSL2 or ADSL2 line."
+   ::= { xdsl2Notifications 15 }
+
+xdsl2LinePerfFailedShortInitThresh NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2PMLInitCurr15MFailedShortInits,
+   xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that the failed short
+      initializations threshold has been reached/exceeded for the
+      referred VDSL2/ADSL/ADSL2 or ADSL2+ line."
+   ::= { xdsl2Notifications 16 }
+
+xdsl2LineStatusChangeXtuc NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2LineStatusXtuc
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that a status change is
+      detected for the referred xTU-C."
+   ::= { xdsl2Notifications 17 }
+
+xdsl2LineStatusChangeXtur NOTIFICATION-TYPE
+   OBJECTS
+   {
+   xdsl2LineStatusXtur
+   }
+   STATUS     current
+   DESCRIPTION
+     "This notification indicates that a status change is
+      detected for the referred xTU-R."
+   ::= { xdsl2Notifications 18 }
+
+   -- conformance information
+
+   xdsl2Groups OBJECT IDENTIFIER ::= { xdsl2Conformance 1 }
+   xdsl2Compliances OBJECT IDENTIFIER ::= { xdsl2Conformance 2 }
+
+   xdsl2LineMibCompliance MODULE-COMPLIANCE
+      STATUS  current
+      DESCRIPTION
+         "The compliance statement for SNMP entities which
+          manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces."
+      MODULE  -- this module
+      MANDATORY-GROUPS
+          {
+          xdsl2LineGroup,
+          xdsl2ChannelStatusGroup,
+          xdsl2SCStatusGroup,
+          xdsl2LineInventoryGroup,
+          xdsl2LineConfTemplateGroup,
+          xdsl2LineConfProfGroup,
+          xdsl2LineConfProfModeSpecGroup,
+          xdsl2LineConfProfModeSpecBandUsGroup,
+          xdsl2ChConfProfileGroup,
+          xdsl2LineAlarmConfTemplateGroup,
+          xdsl2PMLineCurrGroup,
+          xdsl2PMLineInitCurrGroup,
+          xdsl2PMLineHist15MinGroup,
+          xdsl2PMLineHist1DayGroup,
+          xdsl2PMLineInitHist15MinGroup,
+          xdsl2PMLineInitHist1DayGroup,
+          xdsl2PMChCurrGroup,
+          xdsl2PMChHist15MinGroup,
+          xdsl2PMChHist1DGroup
+          }
+
+   GROUP  xdsl2LineFallbackGroup
+      DESCRIPTION
+        "The group of configuration, status, and commands
+         objects on the line level that are associated with the fallback
+         feature."
+
+   GROUP  xdsl2LineBpscGroup
+      DESCRIPTION
+        "The group of configuration, status, and commands objects
+         on the line level that are associated with requesting a bits
+         per subcarrier measurement."
+
+   GROUP  xdsl2LineSegmentGroup
+      DESCRIPTION
+        "The group of status and commands objects on the line
+         level that are used to hold the results of the
+         bits-per-subcarrier measurement."
+
+   GROUP  xdsl2ChannelStatusAtmGroup
+      DESCRIPTION
+        "The group of status objects required when the data path
+         is ATM."
+
+   GROUP  xdsl2ChannelStatusPtmGroup
+      DESCRIPTION
+        "The group of status objects required when the data path
+         is PTM."
+
+   GROUP  xdsl2LineConfProfRaGroup
+      DESCRIPTION
+        "The group of objects required for controlling the
+         rate-adaptive behavior of the line."
+
+   GROUP  xdsl2LineConfProfMsgMinGroup
+      DESCRIPTION
+        "The group of objects required for controlling the rate
+         reserved for Overhead traffic."
+
+   GROUP  xdsl2LineAlarmConfProfileGroup
+      DESCRIPTION
+        "The group of objects that define the alarm thresholds
+         on line-level PM counters."
+
+   GROUP  xdsl2ChAlarmConfProfileGroup
+      DESCRIPTION
+        "The group of objects that define the alarm thresholds
+        on channel-level PM counters."
+
+   GROUP  xdsl2ChConfProfileAtmGroup
+      DESCRIPTION
+        "The group of configuration objects required when the data
+         path is ATM."
+
+   GROUP  xdsl2ChConfProfileMinResGroup
+      DESCRIPTION
+        "The group of configuration objects required for the
+         reserved data rate."
+
+   GROUP  xdsl2ChConfProfileOptAttrGroup
+      DESCRIPTION
+        "The group of various optional channel configuration
+        objects."
+
+   GROUP  xdsl2PMLineInitCurrShortGroup
+      DESCRIPTION
+        "The group of PM counters for the current intervals short
+         initializations."
+
+   GROUP  xdsl2PMLineInitHist15MinShortGroup
+      DESCRIPTION
+        "The group of PM counters for the previous 15-minute
+         intervals short initializations."
+
+   GROUP  xdsl2PMLineInitHist1DayShortGroup
+      DESCRIPTION
+        "The group of PM counters for the previous 24-hour
+         intervals short initializations."
+
+   GROUP  xdsl2ScalarSCGroup
+      DESCRIPTION
+        "The group of objects that report the available memory
+         resources for the DELT processes."
+
+   GROUP  xdsl2ThreshNotificationGroup
+      DESCRIPTION
+        "The group of thresholds crossing notifications."
+
+   GROUP  xdsl2StatusChangeNotificationGroup
+      DESCRIPTION
+        "The group of status change notifications."
+      ::= { xdsl2Compliances 1 }
+
+   -- units of conformance
+
+   xdsl2LineGroup OBJECT-GROUP
+
+      OBJECTS
+          {
+          xdsl2LineConfTemplate,
+          xdsl2LineAlarmConfTemplate,
+          xdsl2LineCmndConfPmsf,
+          xdsl2LineCmndConfLdsf,
+          xdsl2LineCmndConfLdsfFailReason,
+          xdsl2LineCmndAutomodeColdStart,
+          xdsl2LineCmndConfReset,
+          xdsl2LineStatusXtuTransSys,
+          xdsl2LineStatusPwrMngState,
+          xdsl2LineStatusInitResult,
+          xdsl2LineStatusLastStateDs,
+          xdsl2LineStatusLastStateUs,
+          xdsl2LineStatusXtur,
+          xdsl2LineStatusXtuc,
+          xdsl2LineStatusAttainableRateDs,
+          xdsl2LineStatusAttainableRateUs,
+          xdsl2LineStatusActPsdDs,
+          xdsl2LineStatusActPsdUs,
+          xdsl2LineStatusActAtpDs,
+          xdsl2LineStatusActAtpUs,
+          xdsl2LineStatusActProfile,
+          xdsl2LineStatusActLimitMask,
+          xdsl2LineStatusActUs0Mask,
+          xdsl2LineStatusActSnrModeDs,
+          xdsl2LineStatusActSnrModeUs,
+          xdsl2LineStatusElectricalLength,
+          xdsl2LineStatusTssiDs,
+          xdsl2LineStatusTssiUs,
+          xdsl2LineStatusMrefPsdDs,
+          xdsl2LineStatusMrefPsdUs,
+          xdsl2LineStatusTrellisDs,
+          xdsl2LineStatusTrellisUs,
+          xdsl2LineStatusActualCe,
+          xdsl2LineBandStatusLnAtten,
+          xdsl2LineBandStatusSigAtten,
+          xdsl2LineBandStatusSnrMargin
+           }
+      STATUS     current
+      DESCRIPTION
+         "The group of configuration, status, and commands objects
+          on the line level."
+      ::= { xdsl2Groups 1 }
+
+   xdsl2LineFallbackGroup OBJECT-GROUP
+      OBJECTS
+          {
+
+          xdsl2LineConfFallbackTemplate,
+          xdsl2LineStatusActTemplate
+           }
+      STATUS     current
+      DESCRIPTION
+         "The group of configuration, status, and commands
+          objects on the line level that are associated with the
+          fallback feature."
+      ::= { xdsl2Groups 2 }
+
+   xdsl2LineBpscGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LineCmndConfBpsc,
+          xdsl2LineCmndConfBpscFailReason,
+          xdsl2LineCmndConfBpscRequests
+           }
+      STATUS     current
+      DESCRIPTION
+         "The group of configuration, status, and commands
+          objects on the line level that are associated with requesting
+          a bits-per-subcarrier measurement."
+      ::= { xdsl2Groups 3 }
+
+   xdsl2LineSegmentGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LineSegmentBitsAlloc,
+          xdsl2LineSegmentRowStatus
+           }
+      STATUS     current
+      DESCRIPTION
+         "The group of status and commands objects on the line
+          level that are used to hold the results of the
+          bits-per-subcarrier measurement."
+      ::= { xdsl2Groups 4 }
+
+   xdsl2ChannelStatusGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChStatusActDataRate,
+          xdsl2ChStatusPrevDataRate,
+          xdsl2ChStatusActDelay,
+          xdsl2ChStatusActInp,
+          xdsl2ChStatusInpReport,
+          xdsl2ChStatusNFec,
+          xdsl2ChStatusRFec,
+          xdsl2ChStatusLSymb,
+          xdsl2ChStatusIntlvDepth,
+          xdsl2ChStatusIntlvBlock,
+          xdsl2ChStatusLPath
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of status objects on the channel level."
+      ::= { xdsl2Groups 5 }
+
+   xdsl2ChannelStatusAtmGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChStatusAtmStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of status objects on the data path level
+          when it is ATM."
+      ::= { xdsl2Groups 6 }
+
+   xdsl2ChannelStatusPtmGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChStatusPtmStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of status objects on the data path level
+          when it is PTM."
+      ::= { xdsl2Groups 7 }
+
+   xdsl2SCStatusGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2SCStatusLinScale,
+          xdsl2SCStatusLinScGroupSize,
+          xdsl2SCStatusLogMt,
+          xdsl2SCStatusLogScGroupSize,
+          xdsl2SCStatusQlnMt,
+          xdsl2SCStatusQlnScGroupSize,
+          xdsl2SCStatusSnrMtime,
+          xdsl2SCStatusSnrScGroupSize,
+          xdsl2SCStatusBandLnAtten,
+          xdsl2SCStatusBandSigAtten,
+          xdsl2SCStatusAttainableRate,
+          xdsl2SCStatusRowStatus,
+          xdsl2SCStatusSegmentLinReal,
+          xdsl2SCStatusSegmentLinImg,
+          xdsl2SCStatusSegmentLog,
+          xdsl2SCStatusSegmentQln,
+          xdsl2SCStatusSegmentSnr,
+          xdsl2SCStatusSegmentBitsAlloc,
+          xdsl2SCStatusSegmentGainAlloc
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of status objects on the subcarrier level.
+          They are updated as a result of a DELT process."
+      ::= { xdsl2Groups 8 }
+
+   xdsl2LineInventoryGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LInvG994VendorId,
+          xdsl2LInvSystemVendorId,
+          xdsl2LInvVersionNumber,
+          xdsl2LInvSerialNumber,
+          xdsl2LInvSelfTestResult,
+          xdsl2LInvTransmissionCapabilities
+          }
+      STATUS     current
+      DESCRIPTION
+          "The group of inventory objects per xTU."
+      ::= { xdsl2Groups 9 }
+
+   xdsl2LineConfTemplateGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LConfTempLineProfile,
+          xdsl2LConfTempChan1ConfProfile,
+          xdsl2LConfTempChan1RaRatioDs,
+          xdsl2LConfTempChan1RaRatioUs,
+          xdsl2LConfTempChan2ConfProfile,
+          xdsl2LConfTempChan2RaRatioDs,
+          xdsl2LConfTempChan2RaRatioUs,
+          xdsl2LConfTempChan3ConfProfile,
+          xdsl2LConfTempChan3RaRatioDs,
+          xdsl2LConfTempChan3RaRatioUs,
+          xdsl2LConfTempChan4ConfProfile,
+          xdsl2LConfTempChan4RaRatioDs,
+          xdsl2LConfTempChan4RaRatioUs,
+          xdsl2LConfTempRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a line configuration
+
+          template."
+      ::= { xdsl2Groups 10 }
+
+   xdsl2LineConfProfGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LConfProfScMaskDs,
+          xdsl2LConfProfScMaskUs,
+          xdsl2LConfProfVdsl2CarMask,
+          xdsl2LConfProfRfiBands,
+          xdsl2LConfProfRaModeDs,
+          xdsl2LConfProfRaModeUs,
+          xdsl2LConfProfTargetSnrmDs,
+          xdsl2LConfProfTargetSnrmUs,
+          xdsl2LConfProfMaxSnrmDs,
+          xdsl2LConfProfMaxSnrmUs,
+          xdsl2LConfProfMinSnrmDs,
+          xdsl2LConfProfMinSnrmUs,
+          xdsl2LConfProfCeFlag,
+          xdsl2LConfProfSnrModeDs,
+          xdsl2LConfProfSnrModeUs,
+          xdsl2LConfProfTxRefVnDs,
+          xdsl2LConfProfTxRefVnUs,
+          xdsl2LConfProfXtuTransSysEna,
+          xdsl2LConfProfPmMode,
+          xdsl2LConfProfL0Time,
+          xdsl2LConfProfL2Time,
+          xdsl2LConfProfL2Atpr,
+          xdsl2LConfProfL2Atprt,
+          xdsl2LConfProfProfiles,
+          xdsl2LConfProfDpboEPsd,
+          xdsl2LConfProfDpboEsEL,
+          xdsl2LConfProfDpboEsCableModelA,
+          xdsl2LConfProfDpboEsCableModelB,
+          xdsl2LConfProfDpboEsCableModelC,
+          xdsl2LConfProfDpboMus,
+          xdsl2LConfProfDpboFMin,
+          xdsl2LConfProfDpboFMax,
+          xdsl2LConfProfUpboKL,
+          xdsl2LConfProfUpboKLF,
+          xdsl2LConfProfUs0Mask,
+          xdsl2LConfProfForceInp,
+          xdsl2LConfProfRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a line configuration
+          profile."
+      ::= { xdsl2Groups 11 }
+
+   xdsl2LineConfProfRaGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LConfProfRaUsNrmDs,
+          xdsl2LConfProfRaUsNrmUs,
+          xdsl2LConfProfRaUsTimeDs,
+          xdsl2LConfProfRaUsTimeUs,
+          xdsl2LConfProfRaDsNrmDs,
+          xdsl2LConfProfRaDsNrmUs,
+          xdsl2LConfProfRaDsTimeDs,
+          xdsl2LConfProfRaDsTimeUs
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects required for controlling the
+          rate-adaptive behavior of the line."
+      ::= { xdsl2Groups 12 }
+
+   xdsl2LineConfProfMsgMinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LConfProfMsgMinUs,
+          xdsl2LConfProfMsgMinDs
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects required for controlling the rate
+          reserved for Overhead traffic."
+      ::= { xdsl2Groups 13 }
+
+   xdsl2LineConfProfModeSpecGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LConfProfMaxNomPsdDs,
+          xdsl2LConfProfMaxNomPsdUs,
+          xdsl2LConfProfMaxNomAtpDs,
+          xdsl2LConfProfMaxNomAtpUs,
+          xdsl2LConfProfMaxAggRxPwrUs,
+          xdsl2LConfProfPsdMaskDs,
+          xdsl2LConfProfPsdMaskUs,
+          xdsl2LConfProfPsdMaskSelectUs,
+          xdsl2LConfProfClassMask,
+          xdsl2LConfProfLimitMask,
+          xdsl2LConfProfUs0Disable,
+          xdsl2LConfProfModeSpecRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a line configuration profile
+          that have an instance for each operation mode allowed."
+      ::= { xdsl2Groups 14 }
+
+   xdsl2LineConfProfModeSpecBandUsGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LConfProfUpboPsdA,
+          xdsl2LConfProfUpboPsdB,
+          xdsl2LConfProfModeSpecBandUsRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a line configuration profile
+          that have several per-upstream-band instances for each
+          operation mode allowed."
+      ::= { xdsl2Groups 15 }
+
+   xdsl2ChConfProfileGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChConfProfMinDataRateDs,
+          xdsl2ChConfProfMinDataRateUs,
+          xdsl2ChConfProfMaxDataRateDs,
+          xdsl2ChConfProfMaxDataRateUs,
+          xdsl2ChConfProfMinDataRateLowPwrDs,
+          xdsl2ChConfProfMinDataRateLowPwrUs,
+          xdsl2ChConfProfMaxDelayDs,
+          xdsl2ChConfProfMaxDelayUs,
+          xdsl2ChConfProfMinProtectionDs,
+          xdsl2ChConfProfMinProtectionUs,
+          xdsl2ChConfProfMinProtection8Ds,
+          xdsl2ChConfProfMinProtection8Us,
+          xdsl2ChConfProfMaxBerDs,
+          xdsl2ChConfProfMaxBerUs,
+          xdsl2ChConfProfUsDataRateDs,
+          xdsl2ChConfProfDsDataRateDs,
+          xdsl2ChConfProfUsDataRateUs,
+          xdsl2ChConfProfDsDataRateUs,
+          xdsl2ChConfProfRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a channel configuration
+          profile."
+      ::= { xdsl2Groups 16 }
+
+   xdsl2ChConfProfileAtmGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChConfProfImaEnabled,
+          xdsl2ChStatusAtmStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of configuration objects required when the data
+          path is ATM."
+      ::= { xdsl2Groups 17 }
+
+   xdsl2ChConfProfileMinResGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChConfProfMinResDataRateDs,
+          xdsl2ChConfProfMinResDataRateUs
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of configuration objects required for the
+          reserved data rate."
+      ::= { xdsl2Groups 18 }
+   xdsl2ChConfProfileOptAttrGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChConfProfMaxDelayVar,
+          xdsl2ChConfProfInitPolicy
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of various optional channel configuration
+          parameters."
+      ::= { xdsl2Groups 19 }
+
+   xdsl2LineAlarmConfTemplateGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LAlarmConfTempLineProfile,
+          xdsl2LAlarmConfTempChan1ConfProfile,
+          xdsl2LAlarmConfTempChan2ConfProfile,
+          xdsl2LAlarmConfTempChan3ConfProfile,
+          xdsl2LAlarmConfTempChan4ConfProfile,
+          xdsl2LAlarmConfTempRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a line alarm template."
+      ::= { xdsl2Groups 20 }
+
+   xdsl2LineAlarmConfProfileGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2LineAlarmConfProfileXtucThresh15MinFecs,
+          xdsl2LineAlarmConfProfileXtucThresh15MinEs,
+          xdsl2LineAlarmConfProfileXtucThresh15MinSes,
+          xdsl2LineAlarmConfProfileXtucThresh15MinLoss,
+          xdsl2LineAlarmConfProfileXtucThresh15MinUas,
+          xdsl2LineAlarmConfProfileXturThresh15MinFecs,
+          xdsl2LineAlarmConfProfileXturThresh15MinEs,
+          xdsl2LineAlarmConfProfileXturThresh15MinSes,
+          xdsl2LineAlarmConfProfileXturThresh15MinLoss,
+          xdsl2LineAlarmConfProfileXturThresh15MinUas,
+          xdsl2LineAlarmConfProfileThresh15MinFailedFullInt,
+          xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt,
+          xdsl2LineAlarmConfProfileRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a line alarm profile."
+      ::= { xdsl2Groups 21 }
+
+   xdsl2ChAlarmConfProfileGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations,
+          xdsl2ChAlarmConfProfileXtucThresh15MinCorrected,
+          xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations,
+          xdsl2ChAlarmConfProfileXturThresh15MinCorrected,
+          xdsl2ChAlarmConfProfileRowStatus
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects in a channel alarm profile."
+      ::= { xdsl2Groups 22 }
+
+   xdsl2PMLineCurrGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLCurr15MValidIntervals,
+          xdsl2PMLCurr15MInvalidIntervals,
+          xdsl2PMLCurr15MTimeElapsed,
+          xdsl2PMLCurr15MFecs,
+          xdsl2PMLCurr15MEs,
+          xdsl2PMLCurr15MSes,
+          xdsl2PMLCurr15MLoss,
+          xdsl2PMLCurr15MUas,
+          xdsl2PMLCurr1DayValidIntervals,
+          xdsl2PMLCurr1DayInvalidIntervals,
+          xdsl2PMLCurr1DayTimeElapsed,
+          xdsl2PMLCurr1DayFecs,
+          xdsl2PMLCurr1DayEs,
+          xdsl2PMLCurr1DaySes,
+          xdsl2PMLCurr1DayLoss,
+          xdsl2PMLCurr1DayUas
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects that report the line-level
+          counters for current PM intervals."
+      ::= { xdsl2Groups 23 }
+
+   xdsl2PMLineInitCurrGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLInitCurr15MValidIntervals,
+          xdsl2PMLInitCurr15MInvalidIntervals,
+          xdsl2PMLInitCurr15MTimeElapsed,
+          xdsl2PMLInitCurr15MFullInits,
+          xdsl2PMLInitCurr15MFailedFullInits,
+          xdsl2PMLInitCurr1DayValidIntervals,
+          xdsl2PMLInitCurr1DayInvalidIntervals,
+          xdsl2PMLInitCurr1DayTimeElapsed,
+          xdsl2PMLInitCurr1DayFullInits,
+          xdsl2PMLInitCurr1DayFailedFullInits
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects that report the full
+          initialization counters for current PM intervals."
+      ::= { xdsl2Groups 24 }
+
+   xdsl2PMLineInitCurrShortGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLInitCurr15MShortInits,
+          xdsl2PMLInitCurr15MFailedShortInits,
+          xdsl2PMLInitCurr1DayShortInits,
+          xdsl2PMLInitCurr1DayFailedShortInits
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects that report the short
+          initialization counters for current PM intervals."
+      ::= { xdsl2Groups 25 }
+
+   xdsl2PMLineHist15MinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLHist15MMonitoredTime,
+          xdsl2PMLHist15MFecs,
+          xdsl2PMLHist15MEs,
+          xdsl2PMLHist15MSes,
+          xdsl2PMLHist15MLoss,
+          xdsl2PMLHist15MUas,
+          xdsl2PMLHist15MValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of line-level PM counters for the previous
+          15-minute intervals."
+      ::= { xdsl2Groups 26 }
+
+   xdsl2PMLineHist1DayGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLHist1DMonitoredTime,
+          xdsl2PMLHist1DFecs,
+          xdsl2PMLHist1DEs,
+          xdsl2PMLHist1DSes,
+          xdsl2PMLHist1DLoss,
+          xdsl2PMLHist1DUas,
+          xdsl2PMLHist1DValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of line-level PM counters for the previous
+          24-hour intervals."
+      ::= { xdsl2Groups 27 }
+
+   xdsl2PMLineInitHist15MinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLInitHist15MMonitoredTime,
+          xdsl2PMLInitHist15MFullInits,
+          xdsl2PMLInitHist15MFailedFullInits,
+          xdsl2PMLInitHist15MValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of PM counters for the previous 15-minute
+          interval full initializations."
+      ::= { xdsl2Groups 28 }
+
+   xdsl2PMLineInitHist15MinShortGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLInitHist15MShortInits,
+          xdsl2PMLInitHist15MFailedShortInits
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of PM counters for the previous 15-minute
+          interval short initializations."
+      ::= { xdsl2Groups 29 }
+
+   xdsl2PMLineInitHist1DayGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLInitHist1DMonitoredTime,
+          xdsl2PMLInitHist1DFullInits,
+          xdsl2PMLInitHist1DFailedFullInits,
+          xdsl2PMLInitHist1DValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of PM counters for the previous 24-hour
+          interval full initializations."
+      ::= { xdsl2Groups 30 }
+
+   xdsl2PMLineInitHist1DayShortGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMLInitHist1DShortInits,
+          xdsl2PMLInitHist1DFailedShortInits
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of PM counters for the previous 24-hour
+          interval short initializations."
+      ::= { xdsl2Groups 31 }
+
+   xdsl2PMChCurrGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMChCurr15MValidIntervals,
+          xdsl2PMChCurr15MInvalidIntervals,
+          xdsl2PMChCurr15MTimeElapsed,
+          xdsl2PMChCurr15MCodingViolations,
+          xdsl2PMChCurr15MCorrectedBlocks,
+          xdsl2PMChCurr1DayValidIntervals,
+          xdsl2PMChCurr1DayInvalidIntervals,
+          xdsl2PMChCurr1DayTimeElapsed,
+          xdsl2PMChCurr1DayCodingViolations,
+          xdsl2PMChCurr1DayCorrectedBlocks
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects that report the channel-level
+          counters for current PM intervals."
+      ::= { xdsl2Groups 32 }
+
+   xdsl2PMChHist15MinGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMChHist15MMonitoredTime,
+          xdsl2PMChHist15MCodingViolations,
+          xdsl2PMChHist15MCorrectedBlocks,
+          xdsl2PMChHist15MValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects that report the channel-level
+          counters for previous 15-minute PM intervals."
+      ::= { xdsl2Groups 33 }
+
+   xdsl2PMChHist1DGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2PMChHist1DMonitoredTime,
+          xdsl2PMChHist1DCodingViolations,
+          xdsl2PMChHist1DCorrectedBlocks,
+          xdsl2PMChHist1DValidInterval
+          }
+      STATUS     current
+      DESCRIPTION
+        "The group of objects that report the channel-level
+        counters for previous 24-hour PM intervals."
+      ::= { xdsl2Groups 34 }
+
+   xdsl2ScalarSCGroup OBJECT-GROUP
+      OBJECTS
+          {
+          xdsl2ScalarSCMaxInterfaces,
+          xdsl2ScalarSCAvailInterfaces
+          }
+      STATUS     current
+      DESCRIPTION
+         "The group of objects that report the available memory
+          resources for DELT processes."
+      ::= { xdsl2Groups 35 }
+
+   xdsl2ThreshNotificationGroup NOTIFICATION-GROUP
+      NOTIFICATIONS
+      {
+      xdsl2LinePerfFECSThreshXtuc,
+      xdsl2LinePerfFECSThreshXtur,
+      xdsl2LinePerfESThreshXtuc,
+      xdsl2LinePerfESThreshXtur,
+      xdsl2LinePerfSESThreshXtuc,
+      xdsl2LinePerfSESThreshXtur,
+      xdsl2LinePerfLOSSThreshXtuc,
+      xdsl2LinePerfLOSSThreshXtur,
+      xdsl2LinePerfUASThreshXtuc,
+      xdsl2LinePerfUASThreshXtur,
+      xdsl2LinePerfCodingViolationsThreshXtuc,
+      xdsl2LinePerfCodingViolationsThreshXtur,
+      xdsl2LinePerfCorrectedThreshXtuc,
+      xdsl2LinePerfCorrectedThreshXtur,
+      xdsl2LinePerfFailedFullInitThresh,
+      xdsl2LinePerfFailedShortInitThresh
+      }
+      STATUS      current
+      DESCRIPTION
+         "This group supports notifications of significant
+          conditions associated with DSL lines."
+      ::= { xdsl2Groups 36 }
+
+   xdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP
+      NOTIFICATIONS
+      {
+      xdsl2LineStatusChangeXtuc,
+      xdsl2LineStatusChangeXtur
+      }
+      STATUS      current
+      DESCRIPTION
+         "This group supports notifications of thresholds crossing
+          associated with DSL lines."
+      ::= { xdsl2Groups 37 }
+
+END
diff --git a/snmp_builder/mibs/VDSL2-LINE-TC-MIB.mib b/snmp_builder/mibs/VDSL2-LINE-TC-MIB.mib
new file mode 100644
index 0000000..06bb1eb
--- /dev/null
+++ b/snmp_builder/mibs/VDSL2-LINE-TC-MIB.mib
@@ -0,0 +1,1479 @@
+VDSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY,
+   transmission
+      FROM SNMPv2-SMI
+
+   TEXTUAL-CONVENTION
+      FROM SNMPv2-TC;
+
+vdsl2TCMIB MODULE-IDENTITY
+   LAST-UPDATED "200909300000Z" -- September 30, 2009
+   ORGANIZATION "ADSLMIB Working Group"
+   CONTACT-INFO "WG-email:  adslmib@ietf.org
+   Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+             Chair:     Mike Sneed
+                        Sand Channel Systems
+             Postal:    P.O. Box 37324
+                        Raleigh NC 27627-732
+             Email:     sneedmike@hotmail.com
+             Phone:     +1 206 600 7022
+
+             Co-Chair:  Menachem Dodge
+
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     mbdodge@ieee.org
+             Phone:     +972 3 926 8421
+
+             Co-editor: Moti Morgenstern
+                        ECI Telecom Ltd.
+             Postal:    30 Hasivim St.
+                        Petach Tikva 49517,
+                        Israel.
+             Email:     moti.morgenstern@ecitele.com
+             Phone:     +972 3 926 6258
+
+             Co-editor: Scott Baillie
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     scott.baillie@nec.com.au
+             Phone:     +61 3 9264 3986
+
+             Co-editor: Umberto Bonollo
+                        NEC Australia
+             Postal:    649-655 Springvale Road,
+                        Mulgrave, Victoria 3170,
+                        Australia.
+             Email:     umberto.bonollo@nec.com.au
+             Phone:     +61 3 9264 3385
+            "
+   DESCRIPTION
+        "This MIB Module provides Textual Conventions to be
+         used by the VDSL2-LINE-MIB module for the purpose of
+         managing VDSL2, ADSL, ADSL2, and ADSL2+ lines.
+
+         Copyright (c) 2009 IETF Trust and the persons
+         identified as authors of the code.  All rights
+         reserved.
+
+         Redistribution and use in source and binary
+         forms, with or without modification, are
+         permitted provided that the following
+         conditions are met:
+
+         - Redistributions of source code must retain the
+           above copyright notice, this list of conditions
+           and the following disclaimer.
+
+         - Redistributions in binary form must reproduce
+           the above copyright notice, this list of
+           conditions and the following disclaimer in
+           the documentation and/or other materials provided
+           with the distribution.
+
+         - Neither the name of Internet Society, IETF or
+           IETF Trust, nor the names of specific contributors,
+           may be used to endorse or promote products derived
+           from this software without specific prior written
+           permission.
+
+         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+         CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
+         WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+         WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+         PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
+         THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
+         DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+         CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+         PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+         DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+         AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+         LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+         ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+         ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+         This version of this MIB module is part of RFC 5650;
+         see the RFC itself for full legal notices."
+
+   REVISION "200909300000Z" -- September 30, 2009
+   DESCRIPTION "Initial version, published as RFC 5650."
+      ::= { transmission 251 3} -- vdsl2MIB 3
+
+------------------------------------------------
+--          Textual Conventions               --
+------------------------------------------------
+
+Xdsl2Unit ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Identifies a transceiver as being either xTU-C or xTU-R.
+       A VDSL2/ADSL/ADSL2 or ADSL2+ line consists of two
+       transceivers: an xTU-C and an xTU-R.
+       In the case of ADSL/ADSL2 and ADSL2+, those two transceivers are
+       also called atuc and atur.
+       In the case of VDSL2, those two transceivers are also called
+       vtuc and vtur.
+
+       Specified as an INTEGER, the two values are:
+        xtuc(1)  -- central office transceiver
+        xtur(2)  -- remote site transceiver"
+   SYNTAX      INTEGER {
+                  xtuc(1),
+                  xtur(2)
+               }
+
+Xdsl2Direction ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "Identifies the direction of a band in a VDSL2/ADSL/ADSL2/
+         ADSL2+ link.
+         The upstream direction is a transmission from the remote end
+         (xTU-R) towards the central office end (xTU-C).  The downstream
+         direction is a transmission from the xTU-C towards the xTU-R.
+         Specified as an INTEGER, the values are defined as
+         follows:"
+     SYNTAX INTEGER {
+        upstream(1),   -- Transmission from the xTU-R to the xTU-C.
+        downstream(2)  -- Transmission from the xTU-C to the xTU-R.
+            }
+
+Xdsl2Band ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link.
+         For a band in the upstream direction, transmission is from the
+         remote end (xTU-R) towards the central office end (xTU-C).
+         For a band in the downstream direction, transmission is from
+         the xTU-C towards the xTU-R.
+         For ADSL, ADSL2 and ADSL2+, which use a single band in the
+         upstream direction and a single band
+         in the downstream direction,
+         the only relevant values are upstream(1) and downstream(2).
+         For VDSL2, which uses multiple bands in each transmission
+         direction, a band in the upstream direction is indicated by any
+         of us0(3), us1(5), us2(7), us3(9), or us4(11), and a band in
+         the downstream direction is indicated by any of ds1(4),
+         ds2(6), ds3(8), or ds4(10).
+         For VDSL2, the values upstream(1) and downstream(2) may be used
+         when there is a need to refer to the whole upstream or
+         downstream traffic (e.g., report the average signal-to-noise
+         ratio on any transmission direction).
+         Specified as an INTEGER, the values are defined as
+         follows:"
+     SYNTAX INTEGER {
+        upstream(1),   -- Transmission from the xTU-R to the xTU-C
+
+                       -- (refers to the single upstream band for
+                       -- ADSL/ADSL2/ADSL2+ or to the whole
+                       -- upstream traffic for VDSL2).
+        downstream(2), -- Transmission from the xTU-C to the xTU-R
+                       -- (refers to the single downstream band
+                       -- for ADSL/ADSL2/ADSL2+ or to the whole
+                       -- downstream traffic for VDSL2).
+        us0(3),        -- Upstream band number 0   (US0) (VDSL2).
+        ds1(4),        -- Downstream band number 1 (DS1) (VDSL2).
+        us1(5),        -- Upstream band number 1   (US1) (VDSL2).
+        ds2(6),        -- Downstream band number 2 (DS2) (VDSL2).
+        us2(7),        -- Upstream band number 2   (US2) (VDSL2).
+        ds3(8),        -- Downstream band number 3 (DS3) (VDSL2).
+        us3(9),        -- Upstream band number 3   (US3) (VDSL2).
+        ds4(10),       -- Downstream band number 4 (DS4) (VDSL2).
+        us4(11)        -- Upstream band number 4   (US4) (VDSL2).
+            }
+
+Xdsl2TransmissionModeType ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "A set of xDSL line transmission modes, with one bit
+       per mode.  The notes (F) and (L) denote Full-Rate and
+       Lite/splitterless, respectively:
+          Bit 00 : Regional Std. (ANSI T1.413) (F)
+          Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
+          Bit 02 : G.992.1 POTS non-overlapped (F)
+          Bit 03 : G.992.1 POTS overlapped (F)
+          Bit 04 : G.992.1 ISDN non-overlapped (F)
+          Bit 05 : G.992.1 ISDN overlapped (F)
+          Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
+          Bit 07 : G.992.1 TCM-ISDN overlapped (F)
+          Bit 08 : G.992.2 POTS non-overlapped (L)
+          Bit 09 : G.992.2 POTS overlapped (L)
+          Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
+          Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
+          Bit 12 : G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
+          Bit 13-17: Reserved
+          Bit 18 : G.992.3 POTS non-overlapped (F)
+          Bit 19 : G.992.3 POTS overlapped (F)
+          Bit 20 : G.992.3 ISDN non-overlapped (F)
+          Bit 21 : G.992.3 ISDN overlapped (F)
+          Bit 22-23: Reserved
+          Bit 24 : G.992.4 POTS non-overlapped (L)
+          Bit 25 : G.992.4 POTS overlapped (L)
+          Bit 26-27: Reserved
+          Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
+          Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
+
+          Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
+          Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
+          Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
+          Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
+          Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
+                                   wide U/S (F)
+          Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
+                                   narrow U/S(F)
+          Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
+                                   wide U/S (F)
+          Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
+                                   narrow U/S (F)
+          Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
+          Bit 39 : G.992.3 Annex M POTS overlapped (F)
+          Bit 40 : G.992.5 POTS non-overlapped (F)
+          Bit 41 : G.992.5 POTS overlapped (F)
+          Bit 42 : G.992.5 ISDN non-overlapped (F)
+          Bit 43 : G.992.5 ISDN overlapped (F)
+          Bit 44-45: Reserved
+          Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
+          Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
+          Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
+          Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
+          Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
+          Bit 51 : G.992.5 Annex M POTS overlapped (F)
+          Bit 52-55: Reserved
+          Bit 56 : G.993.2 Annex A
+          Bit 57 : G.993.2 Annex B
+          Bit 58 : G.993.2 Annex C
+          Bit 59-63: Reserved"
+   SYNTAX      BITS {
+                  ansit1413(0),
+                  etsi(1),
+                  g9921PotsNonOverlapped(2),
+                  g9921PotsOverlapped(3),
+                  g9921IsdnNonOverlapped(4),
+                  g9921isdnOverlapped(5),
+                  g9921tcmIsdnNonOverlapped(6),
+                  g9921tcmIsdnOverlapped(7),
+                  g9922potsNonOverlapped(8),
+                  g9922potsOverlapped(9),
+                  g9922tcmIsdnNonOverlapped(10),
+                  g9922tcmIsdnOverlapped(11),
+                  g9921tcmIsdnSymmetric(12),
+                  reserved1(13),
+                  reserved2(14),
+                  reserved3(15),
+                  reserved4(16),
+                  reserved5(17),
+                  g9923PotsNonOverlapped(18),
+                  g9923PotsOverlapped(19),
+                  g9923IsdnNonOverlapped(20),
+                  g9923isdnOverlapped(21),
+                  reserved6(22),
+                  reserved7(23),
+                  g9924potsNonOverlapped(24),
+                  g9924potsOverlapped(25),
+                  reserved8(26),
+                  reserved9(27),
+                  g9923AnnexIAllDigNonOverlapped(28),
+                  g9923AnnexIAllDigOverlapped(29),
+                  g9923AnnexJAllDigNonOverlapped(30),
+                  g9923AnnexJAllDigOverlapped(31),
+                  g9924AnnexIAllDigNonOverlapped(32),
+                  g9924AnnexIAllDigOverlapped(33),
+                  g9923AnnexLMode1NonOverlapped(34),
+                  g9923AnnexLMode2NonOverlapped(35),
+                  g9923AnnexLMode3Overlapped(36),
+                  g9923AnnexLMode4Overlapped(37),
+                  g9923AnnexMPotsNonOverlapped(38),
+                  g9923AnnexMPotsOverlapped(39),
+                  g9925PotsNonOverlapped(40),
+                  g9925PotsOverlapped(41),
+                  g9925IsdnNonOverlapped(42),
+                  g9925isdnOverlapped(43),
+                  reserved10(44),
+                  reserved11(45),
+                  g9925AnnexIAllDigNonOverlapped(46),
+                  g9925AnnexIAllDigOverlapped(47),
+                  g9925AnnexJAllDigNonOverlapped(48),
+                  g9925AnnexJAllDigOverlapped(49),
+                  g9925AnnexMPotsNonOverlapped(50),
+                  g9925AnnexMPotsOverlapped(51),
+                  reserved12(52),
+                  reserved13(53),
+                  reserved14(54),
+                  reserved15(55),
+                  g9932AnnexA(56),
+                  g9932AnnexB(57),
+                  g9932AnnexC(58),
+                  reserved16(59),
+                  reserved17(60),
+                  reserved18(61),
+                  reserved19(62),
+                  reserved20(63)
+
+               }
+
+Xdsl2RaMode ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Specifies the rate adaptation behavior for the line.
+       The three possible behaviors are:
+        manual (1)   - No Rate-Adaptation.  The initialization
+                       process attempts to synchronize to a
+                       specified rate.
+        raInit (2)   - Rate-Adaptation during initialization process
+                       only, which attempts to synchronize to a rate
+                       between minimum and maximum specified values.
+        dynamicRa (3)- Dynamic Rate-Adaptation during initialization
+                       process as well as during Showtime."
+   SYNTAX      INTEGER {
+                  manual(1),
+                  raInit(2),
+                  dynamicRa(3)
+               }
+
+Xdsl2InitResult ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Specifies the result of full initialization attempt; the
+       six possible result values are:
+        noFail (0)            - Successful initialization
+        configError (1)       - Configuration failure
+        configNotFeasible (2) - Configuration details not supported
+        commFail (3)          - Communication failure
+        noPeerAtu (4)         - Peer ATU not detected
+        otherCause (5)        - Other initialization failure reason"
+   SYNTAX      INTEGER {
+                  noFail(0),
+                  configError(1),
+                  configNotFeasible(2),
+                  commFail(3),
+                  noPeerAtu(4),
+                  otherCause(5)
+               }
+
+Xdsl2OperationModes ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "The VDSL2 management model specified includes an xDSL Mode
+       object that identifies an instance of xDSL Mode-Specific
+       PSD Configuration object in the xDSL Line Profile.  The
+
+       following classes of xDSL operating mode are defined.
+       The notes (F) and (L) denote Full-Rate and Lite/splitterless,
+       respectively:
+       +-------+--------------------------------------------------+
+       | Value |         xDSL operation mode description          |
+       +-------+--------------------------------------------------+
+           1   - The default/generic PSD configuration.  Default
+                 configuration will be used when no other matching
+                 mode-specific configuration can be found.
+           2   - Regional Std. (ANSI T1.413) (F)
+           3   - Regional Std. (ETSI DTS/TM06006) (F)
+           4   - G.992.1 POTS non-overlapped (F)
+           5   - G.992.1 POTS overlapped (F)
+           6   - G.992.1 ISDN non-overlapped (F)
+           7   - G.992.1 ISDN overlapped (F)
+           8   - G.992.1 TCM-ISDN non-overlapped (F)
+           9   - G.992.1 TCM-ISDN overlapped (F)
+          10   - G.992.2 POTS non-overlapped (L)
+          11   - G.992.2 POTS overlapped (L)
+          12   - G.992.2 with TCM-ISDN non-overlapped (L)
+          13   - G.992.2 with TCM-ISDN overlapped (L)
+          14   - G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
+        15-19  - Unused. Reserved for future ITU-T specification.
+          20   - G.992.3 POTS non-overlapped (F)
+          21   - G.992.3 POTS overlapped (F)
+          22   - G.992.3 ISDN non-overlapped (F)
+          23   - G.992.3 ISDN overlapped (F)
+        24-25  - Unused. Reserved for future ITU-T specification.
+          26   - G.992.4 POTS non-overlapped (L)
+          27   - G.992.4 POTS overlapped (L)
+        28-29  - Unused. Reserved for future ITU-T specification.
+          30   - G.992.3 Annex I All-Digital non-overlapped (F)
+          31   - G.992.3 Annex I All-Digital overlapped (F)
+          32   - G.992.3 Annex J All-Digital non-overlapped (F)
+          33   - G.992.3 Annex J All-Digital overlapped (F)
+          34   - G.992.4 Annex I All-Digital non-overlapped (L)
+          35   - G.992.4 Annex I All-Digital overlapped (L)
+          36   - G.992.3 Annex L POTS non-overlapped, mode 1,
+                 wide U/S (F)
+          37   - G.992.3 Annex L POTS non-overlapped, mode 2,
+                 narrow U/S(F)
+          38   - G.992.3 Annex L POTS overlapped, mode 3,
+                 wide U/S (F)
+          39   - G.992.3 Annex L POTS overlapped, mode 4,
+                 narrow U/S (F)
+          40   - G.992.3 Annex M POTS non-overlapped (F)
+          41   - G.992.3 Annex M POTS overlapped (F)
+          42   - G.992.5 POTS non-overlapped (F)
+
+          43   - G.992.5 POTS overlapped (F)
+          44   - G.992.5 ISDN non-overlapped (F)
+          45   - G.992.5 ISDN overlapped (F)
+        46-47  - Unused. Reserved for future ITU-T specification.
+          48   - G.992.5 Annex I All-Digital non-overlapped (F)
+          49   - G.992.5 Annex I All-Digital overlapped (F)
+          50   - G.992.5 Annex J All-Digital non-overlapped (F)
+          51   - G.992.5 Annex J All-Digital overlapped (F)
+          52   - G.992.5 Annex M POTS non-overlapped (F)
+          53   - G.992.5 Annex M POTS overlapped (F)
+        54-57  - Unused. Reserved for future ITU-T specification.
+          58   - G.993.2 Annex A
+          59   - G.993.2 Annex B
+          60   - G.993.2 Annex C
+      "
+   SYNTAX      INTEGER {
+                  defMode(1),
+                  ansit1413(2),
+                  etsi(3),
+                  g9921PotsNonOverlapped(4),
+                  g9921PotsOverlapped(5),
+                  g9921IsdnNonOverlapped(6),
+                  g9921isdnOverlapped(7),
+                  g9921tcmIsdnNonOverlapped(8),
+                  g9921tcmIsdnOverlapped(9),
+                  g9922potsNonOverlapped(10),
+                  g9922potsOverlapped(11),
+                  g9922tcmIsdnNonOverlapped(12),
+                  g9922tcmIsdnOverlapped(13),
+                  g9921tcmIsdnSymmetric(14),
+                  g9923PotsNonOverlapped(20),
+                  g9923PotsOverlapped(21),
+                  g9923IsdnNonOverlapped(22),
+                  g9923isdnOverlapped(23),
+                  g9924potsNonOverlapped(26),
+                  g9924potsOverlapped(27),
+                  g9923AnnexIAllDigNonOverlapped(30),
+                  g9923AnnexIAllDigOverlapped(31),
+                  g9923AnnexJAllDigNonOverlapped(32),
+                  g9923AnnexJAllDigOverlapped(33),
+                  g9924AnnexIAllDigNonOverlapped(34),
+                  g9924AnnexIAllDigOverlapped(35),
+                  g9923AnnexLMode1NonOverlapped(36),
+                  g9923AnnexLMode2NonOverlapped(37),
+                  g9923AnnexLMode3Overlapped(38),
+                  g9923AnnexLMode4Overlapped(39),
+                  g9923AnnexMPotsNonOverlapped(40),
+                  g9923AnnexMPotsOverlapped(41),
+                  g9925PotsNonOverlapped(42),
+                  g9925PotsOverlapped(43),
+                  g9925IsdnNonOverlapped(44),
+                  g9925isdnOverlapped(45),
+                  g9925AnnexIAllDigNonOverlapped(48),
+                  g9925AnnexIAllDigOverlapped(49),
+                  g9925AnnexJAllDigNonOverlapped(50),
+                  g9925AnnexJAllDigOverlapped(51),
+                  g9925AnnexMPotsNonOverlapped(52),
+                  g9925AnnexMPotsOverlapped(53),
+                  g9932AnnexA(58),
+                  g9932AnnexB(59),
+                  g9932AnnexC(60)
+               }
+
+Xdsl2PowerMngState ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Objects with this syntax uniquely identify each power
+       management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+
+       link.
+       In VDSL2, only L0 and L3 states are defined.
+       The possible values are:
+         l0(1)              - L0: Full power.  Synchronized and
+                                  full transmission (i.e., Showtime).
+         l1(2)              - L1: Low power with reduced net data rate
+                                  (for G.992.2 only).
+         l2(3)              - L2: Low power with reduced net data rate
+                                  (for G.992.3, G.992.4 and G.992.5).
+         l3(4)              - L3: Idle power management state / No
+         power."
+   SYNTAX      INTEGER {
+                  l0(1),
+                  l1(2),
+                  l2(3),
+                  l3(4)
+               }
+
+Xdsl2ConfPmsForce ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Objects with this syntax are configuration parameters
+       that specify the desired power management state transition
+       for the VDSL2/ADSL/ADSL2 or ADSL2+ link.
+       In VDSL2, only L0 and L3 states are defined:
+         l3toL0 (0)         - Perform a transition from L3 to L0
+                              (Full power management state).
+
+         l0toL2 (2)         - Perform a transition from L0 to L2
+                              (Low power management state).
+         l0orL2toL3 (3)     - Perform a transition into L3 (Idle
+                              power management state)."
+   SYNTAX      INTEGER {
+                  l3toL0 (0),
+                  l0toL2 (2),
+                  l0orL2toL3 (3)
+               }
+
+Xdsl2LinePmMode ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Objects with this syntax are configuration parameters
+       that reference the power modes/states into which the xTU-C or
+       xTU-R may autonomously transit.
+
+       It is a BITS structure that allows control of the following
+       transit options:
+        allowTransitionsToIdle (0)    - xTU may autonomously transit
+                                        to idle (L3) state.
+        allowTransitionsToLowPower (1)- xTU may autonomously transit
+                                        to low-power (L1/L2)
+                                        state."
+   SYNTAX BITS {
+       allowTransitionsToIdle(0),
+       allowTransitionsToLowPower(1)
+     }
+
+Xdsl2LineLdsf ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Objects with this syntax are configuration parameters
+       that control the Loop Diagnostic mode for a VDSL2/ADSL/ADSL2
+       or ADSL2+ link.  The possible values are:
+         inhibit (0)  - Inhibit Loop Diagnostic mode
+         force   (1)  - Force/Initiate Loop Diagnostic mode"
+   SYNTAX INTEGER {
+       inhibit(0),
+       force(1)
+     }
+
+Xdsl2LdsfResult ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "Possible failure reasons associated with performing
+         Dual Ended Loop Test (DELT) on a DSL line.
+         Possible values are:
+          none        (1) - The default value in case LDSF was never
+                            requested for the associated line.
+          success     (2) - The recent command completed
+                            successfully.
+          inProgress  (3) - The Loop Diagnostics process is in
+                            progress.
+          unsupported (4) - The NE or the line card doesn't support
+                            LDSF.
+          cannotRun   (5) - The NE cannot initiate the command, due
+                            to a nonspecific reason.
+          aborted     (6) - The Loop Diagnostics process aborted.
+          failed      (7) - The Loop Diagnostics process failed.
+          illegalMode (8) - The NE cannot initiate the command, due
+                            to the specific mode of the relevant
+                            line.
+          adminUp     (9) - The NE cannot initiate the command, as
+                            the relevant line is administratively
+                            'Up'.
+          tableFull   (10)- The NE cannot initiate the command, due
+                            to reaching the maximum number of rows
+                            in the results table.
+          noResources (11)- The NE cannot initiate the command, due
+                            to lack of internal memory resources."
+     SYNTAX INTEGER {
+          none (1),
+          success (2),
+          inProgress (3),
+          unsupported (4),
+          cannotRun (5),
+          aborted (6),
+          failed (7),
+          illegalMode (8),
+          adminUp (9),
+          tableFull (10),
+          noResources (11)
+     }
+
+Xdsl2LineBpsc ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Objects with this syntax are configuration parameters
+       that control the bits per subcarrier measurement for a
+       VDSL2/ADSL/ADSL2 or ADSL2+ link.  The possible values are:
+         idle    (1)  - Idle state
+         measure (2)  - Measure the bits per subcarrier"
+   SYNTAX INTEGER {
+       idle(1),
+       measure(2)
+     }
+
+Xdsl2BpscResult ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "Possible failure reasons associated with performing
+         a bits per subcarrier measurement on a DSL line.
+         Possible values are:
+
+          none        (1) - The default value, in case a measurement
+                            was never requested for the associated
+                            line.
+          success     (2) - The recent measurement request completed
+                            successfully.
+          inProgress  (3) - The bits per subcarrier measurement is
+                            in progress.
+          unsupported (4) - The bits per subcarrier request
+                            mechanism is not supported.
+          failed      (5) - The measurement request has failed and no
+                            results are available.
+          noResources (6) - The NE cannot initiate the command, due
+                            to lack of internal memory resources."
+     SYNTAX INTEGER {
+          none(1),
+          success(2),
+          inProgress(3),
+          unsupported(4),
+          failed(5),
+          noResources(6)
+     }
+
+Xdsl2LineReset ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "This type is used to request a line reset to occur.
+          idle        (1) - This state indicates that there is
+                            currently no request for a line reset.
+          reset       (2) - This state indicates that a line reset
+                            request has been issued."
+   SYNTAX INTEGER {
+       idle(1),
+       reset(2)
+     }
+
+Xdsl2LineProfiles ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "Objects with this syntax reference the list of
+      ITU-T G.993.2 implementation profiles supported by an
+      xTU, enabled on the VDSL2 line or active on that line."
+      SYNTAX BITS {
+          profile8a(0),
+          profile8b(1),
+          profile8c(2),
+          profile8d(3),
+          profile12a(4),
+          profile12b(5),
+          profile17a(6),
+          profile30a(7)
+     }
+
+Xdsl2LineClassMask ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "VDSL2 PSD Mask Class.
+       The limit Power Spectral Density masks are grouped in
+       the following PSD mask classes:
+
+       Class 998     Annex A: D-32, D-48, D-64, D-128.
+       Class 997-M1c Annex B: 997-M1c-A-7.
+       Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M.
+       Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M,
+                              997E17-M2x-NUS0, 997E30-M2x-NUS0.
+       Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0.
+       Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B,
+                              998-M2x-NUS0, 998E17-M2x-NUS0,
+                              998E17-M2x-NUS0-M, 998E30-M2x-NUS0,
+                              998E30-M2x-NUS0-M.
+       Class 998ADE-M2x Annex B: Annex B: 998-M2x-A, 998-M2x-M,
+                              998-M2x-B, 998-M2x-NUS0,
+                              998ADE17-M2x-A, 998ADE17-M2x-B,
+                              998ADE17-M2x-NUS0-M,
+                              998ADE30-M2x-NUS0-A,
+                              998ADE30-M2x-NUS0-M.
+       Class 998-B   Annex C: POTS-138b, POTS-276b per C.2.1.1
+                              in G.993.2, TCM-ISDN per C.2.1.2
+                              in G.993.2.
+       Class 998-CO  Annex C: POTS-138co, POTS-276co per C.2.1.1
+                              in G.993.2.
+       Class HPE-M1  Annex B: HPE17-M1-NUS0, HPE30-M1-NUS0."
+   SYNTAX      INTEGER {
+
+                  none(1),
+                  a998ORb997M1cORc998B(2),
+                  b997M1xOR998co(3),
+                  b997M2x(4),
+                  b998M1x(5),
+                  b998M2x(6),
+                  b998AdeM2x(7),
+                  bHpeM1(8)
+               }
+
+Xdsl2LineLimitMask ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "The G.993.2 limit PSD mask for each class of profile.
+      The profiles are grouped in following profile classes:
+      - Class 8: Profiles 8a, 8b, 8c, 8d.
+      - Class 12: Profiles 12a, 12b.
+      - Class 17: Profile 17a.
+      - Class 30: Profile 30a."
+      SYNTAX BITS {
+          profile8Limit1(0),
+          profile8Limit2(1),
+          profile8Limit3(2),
+          profile8Limit4(3),
+          profile8Limit5(4),
+          profile8Limit6(5),
+          profile8Limit7(6),
+          profile8Limit8(7),
+          profile8Limit9(8),
+          profile8Limit10(9),
+          profile8Limit11(10),
+          profile8Limit12(11),
+          profile8Limit13(12),
+          profile8Limit14(13),
+          profile8Limit15(14),
+          profile8Limit16(15),
+          --
+          profile12Limit1(16),
+          profile12Limit2(17),
+          profile12Limit3(18),
+          profile12Limit4(19),
+          profile12Limit5(20),
+          profile12Limit6(21),
+          profile12Limit7(22),
+          profile12Limit8(23),
+          profile12Limit9(24),
+          profile12Limit10(25),
+          profile12Limit11(26),
+          profile12Limit12(27),
+          profile12Limit13(28),
+          profile12Limit14(29),
+          profile12Limit15(30),
+          profile12Limit16(31),
+          --
+          profile17Limit1(32),
+          profile17Limit2(33),
+          profile17Limit3(34),
+          profile17Limit4(35),
+          profile17Limit5(36),
+          profile17Limit6(37),
+          profile17Limit7(38),
+          profile17Limit8(39),
+          profile17Limit9(40),
+          profile17Limit10(41),
+          profile17Limit11(42),
+          profile17Limit12(43),
+          profile17Limit13(44),
+          profile17Limit14(45),
+          profile17Limit15(46),
+          profile17Limit16(47),
+          --
+          profile30Limit1(48),
+          profile30Limit2(49),
+          profile30Limit3(50),
+          profile30Limit4(51),
+          profile30Limit5(52),
+          profile30Limit6(53),
+          profile30Limit7(54),
+          profile30Limit8(55),
+          profile30Limit9(56),
+          profile30Limit10(57),
+          profile30Limit11(58),
+          profile30Limit12(59),
+          profile30Limit13(60),
+          profile30Limit14(61),
+          profile30Limit15(62),
+          profile30Limit16(63)
+     }
+
+Xdsl2LineUs0Disable ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "Indicates if US0 is disabled for each limit PSD mask.
+      The profiles are grouped in following profile classes:
+      - Class 8: Profiles 8a, 8b, 8c, 8d.
+
+      - Class 12: Profiles 12a, 12b.
+      - Class 17: Profile 17a.
+      - Class 30: Profile 30a."
+      SYNTAX BITS {
+          profile8Us0Disable1(0),
+          profile8Us0Disable2(1),
+          profile8Us0Disable3(2),
+          profile8Us0Disable4(3),
+          profile8Us0Disable5(4),
+          profile8Us0Disable6(5),
+          profile8Us0Disable7(6),
+          profile8Us0Disable8(7),
+          profile8Us0Disable9(8),
+          profile8Us0Disable10(9),
+          profile8Us0Disable11(10),
+          profile8Us0Disable12(11),
+          profile8Us0Disable13(12),
+          profile8Us0Disable14(13),
+          profile8Us0Disable15(14),
+          profile8Us0Disable16(15),
+          --
+          profile12Us0Disable1(16),
+          profile12Us0Disable2(17),
+          profile12Us0Disable3(18),
+          profile12Us0Disable4(19),
+          profile12Us0Disable5(20),
+          profile12Us0Disable6(21),
+          profile12Us0Disable7(22),
+          profile12Us0Disable8(23),
+          profile12Us0Disable9(24),
+          profile12Us0Disable10(25),
+          profile12Us0Disable11(26),
+          profile12Us0Disable12(27),
+          profile12Us0Disable13(28),
+          profile12Us0Disable14(29),
+          profile12Us0Disable15(30),
+          profile12Us0Disable16(31),
+          --
+          profile17Us0Disable1(32),
+          profile17Us0Disable2(33),
+          profile17Us0Disable3(34),
+          profile17Us0Disable4(35),
+          profile17Us0Disable5(36),
+          profile17Us0Disable6(37),
+          profile17Us0Disable7(38),
+          profile17Us0Disable8(39),
+          profile17Us0Disable9(40),
+          profile17Us0Disable10(41),
+          profile17Us0Disable11(42),
+          profile17Us0Disable12(43),
+          profile17Us0Disable13(44),
+          profile17Us0Disable14(45),
+          profile17Us0Disable15(46),
+          profile17Us0Disable16(47),
+          --
+          profile30Us0Disable1(48),
+          profile30Us0Disable2(49),
+          profile30Us0Disable3(50),
+          profile30Us0Disable4(51),
+          profile30Us0Disable5(52),
+          profile30Us0Disable6(53),
+          profile30Us0Disable7(54),
+          profile30Us0Disable8(55),
+          profile30Us0Disable9(56),
+          profile30Us0Disable10(57),
+          profile30Us0Disable11(58),
+          profile30Us0Disable12(59),
+          profile30Us0Disable13(60),
+          profile30Us0Disable14(61),
+          profile30Us0Disable15(62),
+          profile30Us0Disable16(63)
+     }
+
+Xdsl2LineUs0Mask ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "The US0 PSD masks to be allowed by the near-end xTU on
+      the line.  This parameter is only defined for G.993.2 Annex A.
+      It is represented as a bitmap (0 if not allowed and 1 if
+      allowed) with the following definitions."
+      SYNTAX BITS {
+          eu32(0),
+          eu36(1),
+          eu40(2),
+          eu44(3),
+          eu48(4),
+          eu52(5),
+          eu56(6),
+          eu60(7),
+          --
+          eu64(8),
+          eu128(9),
+          reserved1(10),
+          reserved2(11),
+          reserved3(12),
+          reserved4(13),
+          reserved5(14),
+          reserved6(15),
+          --
+          adlu32(16),
+          adlu36(17),
+          adlu40(18),
+          adlu44(19),
+          adlu48(20),
+          adlu52(21),
+          adlu56(22),
+          adlu60(23),
+          --
+          adlu64(24),
+          adlu128(25),
+          reserved7(26),
+          reserved8(27),
+          reserved9(28),
+          reserved10(29),
+          reserved11(30),
+          reserved12(31)
+     }
+
+Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type specifies the minimum impulse noise protection
+       for the bearer channel if it is transported over DMT symbols
+       with a subcarrier spacing of 4.3125 kHz.
+       The possible values are:
+       'noProtection' (i.e., INP not required), 'halfSymbol' (i.e., INP
+       length is 1/2 symbol), and 1-16 symbols in steps of 1
+       symbol."
+   SYNTAX      INTEGER {
+               noProtection (1),
+               halfSymbol (2),
+               singleSymbol (3),
+               twoSymbols (4),
+               threeSymbols (5),
+               fourSymbols (6),
+               fiveSymbols (7),
+               sixSymbols (8),
+               sevenSymbols (9),
+               eightSymbols (10),
+               nineSymbols (11),
+               tenSymbols (12),
+               elevenSymbols (13),
+               twelveSymbols (14),
+               thirteeSymbols (15),
+               fourteenSymbols (16),
+               fifteenSymbols (17),
+               sixteenSymbols (18)
+             }
+
+Xdsl2SymbolProtection8 ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type specifies the minimum impulse noise protection
+       for the bearer channel if it is transported over DMT symbols
+       with a subcarrier spacing of 8.625 kHz.
+       The possible values are:
+       'noProtection' (i.e., INP not required) and 1-16 symbols in
+       steps of 1 symbol."
+   SYNTAX      INTEGER {
+               noProtection (1),
+               singleSymbol (2),
+               twoSymbols (3),
+               threeSymbols (4),
+               fourSymbols (5),
+               fiveSymbols (6),
+               sixSymbols (7),
+               sevenSymbols (8),
+               eightSymbols (9),
+               nineSymbols (10),
+               tenSymbols (11),
+               elevenSymbols (12),
+               twelveSymbols (13),
+               thirteeSymbols (14),
+               fourteenSymbols (15),
+               fifteenSymbols (16),
+               sixteenSymbols (17)
+             }
+
+Xdsl2MaxBer ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Objects with this syntax are configuration parameters
+       that reference the maximum Bit Error Rate (BER).
+       The possible values are:
+         eminus3 (1)  - Maximum BER=E^-3
+         eminus5 (2)  - Maximum BER=E^-5
+         eminus7 (3)  - Maximum BER=E^-7"
+   SYNTAX      INTEGER {
+
+                  eminus3(1),
+                  eminus5(2),
+                  eminus7(3)
+               }
+
+Xdsl2ChInitPolicy ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This syntax serves for channel configuration parameters
+       that reference the channel initialization policy.
+       The possible values are:
+         policy0 (1) - Policy 0 according to the applicable standard.
+         policy1 (2) - Policy 1 according to the applicable
+                       standard."
+   SYNTAX      INTEGER {
+                  policy0(1),
+                  policy1(2)
+               }
+
+Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Each one of the 4096 bits in this OCTET STRING array
+       represents the corresponding subcarrier in the downstream
+       direction.
+       A bit value of one indicates that a subcarrier is masked."
+   SYNTAX      OCTET STRING (SIZE(0..512))
+
+Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Each one of the 4096 bits in this OCTET STRING array
+       represents the corresponding subcarrier in the upstream
+       direction.  A bit value of one indicates that a subcarrier
+       is masked."
+   SYNTAX      OCTET STRING (SIZE(0..512))
+
+Xdsl2CarMask ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type defines an array of bands.  Each band is
+       represented by 4 octets and there is a maximum of 32 bands
+       allowed.
+       Each band consists of a 16-bit start subcarrier index followed by
+       a 16-bit stop subcarrier index.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSC-1."
+   SYNTAX      OCTET STRING (SIZE(0..128))
+
+Xdsl2RfiBands ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type defines a subset of downstream PSD mask
+       breakpoints used to notch radio frequency interference (RFI)
+       bands.
+       Each RFI band is represented by 4 octets: a 16-bit start
+       subcarrier index followed by a 16-bit stop subcarrier
+       index.
+       There is a maximum of 16 RFI bands allowed.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSC-1."
+   SYNTAX      OCTET STRING (SIZE(0..64))
+
+Xdsl2PsdMaskDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to 32 PSD mask
+       breakpoints.
+       Each breakpoint occupies 3 octets: The first
+       two octets hold the index of the subcarrier associated with the
+       breakpoint.  The third octet holds the PSD reduction at the
+       breakpoint from 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units
+       of 0.5 dBm/Hz.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSCds-1."
+   SYNTAX      OCTET STRING (SIZE(0..96))
+
+Xdsl2PsdMaskUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to 16 PSD mask
+       breakpoints.
+       Each breakpoint occupies 3 octets: The first two octets hold the
+       index of the subcarrier associated with the breakpoint.  The
+       third octet holds the PSD reduction at the breakpoint from 0
+       (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
+       0.5 dBm/Hz.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSCus-1."
+   SYNTAX      OCTET STRING (SIZE(0..48))
+
+Xdsl2Tssi ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to 32 transmit
+       spectrum shaping (TSSi) breakpoints.
+       Each breakpoint is a pair of values occupying 3 octets with the
+
+       following structure:
+       First 2 octets - Index of the subcarrier used in the context of
+                        the breakpoint.
+       Third octet    - The shaping parameter at the breakpoint.
+       The shaping parameter value is in the range 0 to 126 (units of
+       -0.5 dB).  The special value 127 indicates that the subcarrier is
+       not transmitted.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSC-1."
+   SYNTAX      OCTET STRING (SIZE(0..96))
+
+Xdsl2LastTransmittedState ::= TEXTUAL-CONVENTION
+     STATUS current
+     DESCRIPTION
+        "This parameter represents the last successful transmitted
+         initialization state in the last full initialization performed
+         on the line.  States are per the specific xDSL technology and
+         are numbered from 0 (if G.994.1 is used) or 1 (if G.994.1 is
+         not used) up to Showtime."
+     SYNTAX      INTEGER {
+       -- ADSL family ATU-C side --
+       atucG9941(0),
+       atucQuiet1(1),
+       atucComb1(2),
+       atucQuiet2(3),
+       atucComb2(4),
+       atucIcomb1(5),
+       atucLineprob(6),
+       atucQuiet3(7),
+       atucComb3(8),
+       atucIComb2(9),
+       atucMsgfmt(10),
+       atucMsgpcb(11),
+       atucQuiet4(12),
+       atucReverb1(13),
+       atucTref1(14),
+       atucReverb2(15),
+       atucEct(16),
+       atucReverb3(17),
+       atucTref2(18),
+       atucReverb4(19),
+       atucSegue1(20),
+       atucMsg1(21),
+       atucReverb5(22),
+       atucSegue2(23),
+       atucMedley(24),
+       atucExchmarker(25),
+       atucMsg2(26),
+       atucReverb6(27),
+       atucSegue3(28),
+       atucParams(29),
+       atucReverb7(30),
+       atucSegue4(31),
+       atucShowtime(32),
+       -- ADSL family ATU-R side --
+       aturG9941(100),
+       aturQuiet1(101),
+       aturComb1(102),
+       aturQuiet2(103),
+       aturComb2(104),
+       aturIcomb1(105),
+       aturLineprob(106),
+       aturQuiet3(107),
+       aturComb3(108),
+       aturIcomb2(109),
+       aturMsgfmt(110),
+       aturMsgpcb(111),
+       aturReverb1(112),
+       aturQuiet4(113),
+       aturReverb2(114),
+       aturQuiet5(115),
+       aturReverb3(116),
+       aturEct(117),
+       aturReverb4(118),
+       aturSegue1(119),
+       aturReverb5(120),
+       aturSegue2(121),
+       aturMsg1(122),
+       aturMedley(123),
+       aturExchmarker(124),
+       aturMsg2(125),
+       aturReverb6(126),
+       aturSegue3(127),
+       aturParams(128),
+       aturReverb7(129),
+       aturSegue4(130),
+       aturShowtime(131),
+       -- VDSL2 VTU-C side --
+       vtucG9941(200),
+       vtucQuiet1(201),
+       vtucChDiscov1(202),
+       vtucSynchro1(203),
+       vtucPilot1(204),
+       vtucQuiet2(205),
+       vtucPeriodic1(206),
+       vtucSynchro2(207),
+       vtucChDiscov2(208),
+       vtucSynchro3(209),
+       vtucTraining1(210),
+       vtucSynchro4(211),
+       vtucPilot2(212),
+       vtucTeq(213),
+       vtucEct(214),
+       vtucPilot3(215),
+       vtucPeriodic2(216),
+       vtucTraining2(217),
+       vtucSynchro5(218),
+       vtucMedley(219),
+       vtucSynchro6(220),
+       vtucShowtime(221),
+       -- VDSL2 VTU-R side --
+       vturG9941(300),
+       vturQuiet1(301),
+       vturChDiscov1(302),
+       vturSynchro1(303),
+       vturLineprobe(304),
+       vturPeriodic1(305),
+       vturSynchro2(306),
+       vturChDiscov2(307),
+       vturSynchro3(308),
+       vturQuiet2(309),
+       vturTraining1(310),
+       vturSynchro4(311),
+       vturTeq(312),
+       vturQuiet3(313),
+       vturEct(314),
+       vturPeriodic2(315),
+       vturTraining2(316),
+       vturSynchro5(317),
+       vturMedley(318),
+       vturSynchro6(319),
+       vturShowtime(320)
+     }
+
+Xdsl2LineStatus ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+      "Objects with this syntax are status parameters
+       that reflect the failure status for a given endpoint of a
+       VDSL2/ADSL/ADSL2 or ADSL2+ link.
+
+       This BITS structure can report the following failures:
+
+        noDefect (0)      - This bit position positively reports
+
+                            that no defect or failure exist.
+        lossOfFraming (1) - Loss of frame synchronization.
+        lossOfSignal (2)  - Loss of signal.
+        lossOfPower (3)   - Loss of power.  Usually this failure may
+                            be reported for CPE units only.
+        initFailure (4)   - Recent initialization process failed.
+                            Never active on xTU-R."
+   SYNTAX BITS {
+       noDefect(0),
+       lossOfFraming(1),
+       lossOfSignal(2),
+       lossOfPower(3),
+        initFailure(4)
+     }
+
+Xdsl2ChInpReport ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type is used to indicate the method used to compute the
+       Actual Impulse Noise Protection (ACTINP).  If set to
+       'inpComputedUsingFormula', the ACTINP is computed
+       according to the INP_no_erasure formula (9.6/G.993.2).
+       If set to 'inpEstimatedByXtur', the ACTINP is the value
+       estimated by the xTU receiver.
+        inpComputedUsingFormula (1) - ACTINP computed using
+                                      INP_no_erasure formula.
+        inpEstimatedByXtur (2)      - ACTINP estimated by
+                                      the xTU receiver."
+   SYNTAX      INTEGER {
+                  inpComputedUsingFormula(1),
+                  inpEstimatedByXtur(2)
+               }
+
+Xdsl2ChAtmStatus ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "Objects with this syntax are status parameters that
+      reflect the failure status for the Transmission Convergence (TC)
+      layer of a given ATM interface (data path over a VDSL2/ADSL/
+      ADSL2 or ADSL2+ link).
+
+      This BITS structure can report the following failures:
+       noDefect (0)             - This bit position positively
+                                  reports that no defect or failure
+                                  exists.
+       noCellDelineation (1)    - The link was successfully
+                                  initialized, but cell delineation
+                                  was never acquired on the
+
+                                  associated ATM data path.
+       lossOfCellDelineation (2)- Loss of cell delineation on the
+                                  associated ATM data path."
+   SYNTAX BITS {
+       noDefect(0),
+       noCellDelineation(1),
+       lossOfCellDelineation(2)
+     }
+
+Xdsl2ChPtmStatus ::= TEXTUAL-CONVENTION
+   STATUS current
+   DESCRIPTION
+     "Objects with this syntax are status parameters that
+      reflect the failure status for a given PTM interface (packet
+      data path over a VDSL2/ADSL/ADSL2 or ADSL2+ link).
+
+      This BITS structure can report the following failures:
+          noDefect (0)    - This bit position positively
+                            reports that no defect or failure exists.
+          outOfSync (1)   - Out of synchronization."
+   SYNTAX BITS {
+          noDefect(0),
+          outOfSync(1)
+     }
+
+Xdsl2UpboKLF ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Defines the upstream power backoff force mode (UPBOKLF).
+       The three possible mode values are:
+          auto(1)         - The VDSL Transceiver Unit (VTUs) will
+                            autonomously determine the
+                            electrical length.
+          override(2)     - Forces the VTU-R to use the electrical
+                            length, kl0, of the CO-MIB (UPBOKL) to
+                            compute the UPBO.
+          disableUpbo(3)  - Disables UPBO such that UPBO is not
+                            utilized."
+   SYNTAX INTEGER {
+     auto(1),
+     override(2),
+     disableUpbo(3)
+     }
+
+Xdsl2BandUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Each value identifies a specific band in the upstream
+
+       transmission direction (excluding the US0 band.).
+       The possible values that identify a band are as follows:
+          us1(5)          - Upstream band number 1 (US1).
+          us2(7)          - Upstream band number 2 (US2).
+          us3(9)          - Upstream band number 3 (US3).
+          us4(11)         - Upstream band number 4 (US4)."
+   SYNTAX        INTEGER {
+     us1(5),
+     us2(7),
+     us3(9),
+     us4(11)
+     }
+
+Xdsl2LinePsdMaskSelectUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type is used to define which upstream PSD mask is
+       enabled.  This type is used only for Annexes J and M of ITU-T
+       Recommendations G.992.3 and G.992.5.
+
+       adlu32Eu32 (1),   - ADLU-32 / EU-32
+       adlu36Eu36 (2),   - ADLU-36 / EU-36
+       adlu40Eu40 (3),   - ADLU-40 / EU-40
+       adlu44Eu44 (4),   - ADLU-44 / EU-44
+       adlu48Eu48 (5),   - ADLU-48 / EU-48
+       adlu52Eu52 (6),   - ADLU-52 / EU-52
+       adlu56Eu56 (7),   - ADLU-56 / EU-56
+       adlu60Eu60 (8),   - ADLU-60 / EU-60
+       adlu64Eu64 (9)    - ADLU-64 / EU-64"
+   SYNTAX        INTEGER {
+     adlu32Eu32(1),
+     adlu36Eu36(2),
+     adlu40Eu40(3),
+     adlu44Eu44(4),
+     adlu48Eu48(5),
+     adlu52Eu52(6),
+     adlu56Eu56(7),
+     adlu60Eu60(8),
+     adlu64Eu64(9)
+     }
+
+Xdsl2LineCeFlag ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type is used to enable the use of the optional
+       cyclic extension values.  If the bit is set to '1', the optional
+       cyclic extension values may be used.  Otherwise, the cyclic
+       extension shall be forced to the mandatory length (5N/32).
+
+       enableCyclicExtension (0) - Enable use of optional
+                                   Cyclic Extension values."
+   SYNTAX        BITS {
+     enableCyclicExtension(0)
+     }
+
+Xdsl2LineSnrMode ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type is used to enable the transmitter-referred
+       virtual noise.  The value of 1, indicates that virtual
+       noise is disabled.  The value of 2, indicates that virtual
+       noise is enabled.
+
+      virtualNoiseDisabled (1) - virtual noise is disabled.
+      virtualNoiseEnabled (2)  - virtual noise is enabled."
+   SYNTAX        INTEGER {
+     virtualNoiseDisabled(1),
+     virtualNoiseEnabled(2)
+     }
+
+Xdsl2LineTxRefVnDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to 32 PSD mask
+       breakpoints.
+       Each breakpoint occupies 3 octets: The first two octets hold the
+       index of the subcarrier associated with the breakpoint.  The
+       third octet holds the PSD reduction at the breakpoint from 0
+       (-140 dBm/Hz) to 200 (-40 dBm/Hz) using units of 0.5 dBm/Hz.
+       A special value of 255 indicates a noise level of 0 W/Hz.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSCds-1."
+   SYNTAX      OCTET STRING (SIZE(0..96))
+
+Xdsl2LineTxRefVnUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This is a structure that represents up to 16 PSD mask
+       breakpoints.
+       Each breakpoint occupies 3 octets: The first two octets hold the
+       index of the subcarrier associated with the breakpoint.  The
+       third octet holds the PSD reduction at the breakpoint from 0
+       (-140 dBm/Hz) to 200 (-40 dBm/Hz) using units of 0.5 dBm/Hz.
+       A special value of 255 indicates a noise level of 0 W/Hz.
+       The subcarrier index is an unsigned number in the range 0 to
+       NSCus-1."
+   SYNTAX      OCTET STRING (SIZE(0..48))
+
+Xdsl2BitsAlloc ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "This type specifies an array of nibbles, where each nibble
+       indicates the bits allocation for a subcarrier.
+       Each nibble has a value in the range 0 to 15 to indicate
+       the bits allocation."
+   SYNTAX      OCTET STRING (SIZE(0..256))
+
+Xdsl2MrefPsdDs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Objects with this syntax are MEDLEY Reference PSD status
+       parameters in the downstream direction.  This is expressed as
+       the set of
+       breakpoints exchanged at initialization.
+       The OCTET STRING contains up to 48 pairs of values in the
+       following structure:
+       Octets 0-1 -- Index of the first subcarrier used in the
+                   context of a first breakpoint.
+       Octets 2-3 -- The PSD level for the subcarrier indicated
+                   in octets 0-1.
+       Octets 4-7 -- Same, for a second breakpoint
+       Octets 8-11 -- Same, for a third breakpoint
+       And so on until
+       Octets 188-191 -- Same, for a 48th breakpoint.
+       The subcarrier index is an unsigned number in the range 0
+       to NSCds-1.
+       The PSD level is an integer value in the 0 to 4095 range.  It is
+       represented in units of 0.1 dB offset from -140 dBm/Hz."
+   SYNTAX      OCTET STRING (SIZE(0..192))
+
+Xdsl2MrefPsdUs ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+      "Objects with this syntax are MEDLEY Reference PSD status
+       parameters in the upstream direction.  This is expressed
+       as the set of
+       breakpoints exchanged at initialization.
+       The OCTET STRING contains up to 32 pairs of values in the
+       following structure:
+       Octets 0-1 -- Index of the first subcarrier used in the
+                   context of a first breakpoint.
+       Octets 2-3 -- The PSD level for the subcarrier indicated
+                   in octets 0-1.
+       Octets 4-7 -- Same, for a second breakpoint
+       Octets 8-11 -- Same, for a third breakpoint
+       And so on until
+
+       Octets 124-127 -- Same, for a 32nd breakpoint.
+       The subcarrier index is an unsigned number in the range 0
+       to NSCus-1.
+       The PSD level is an integer value in the 0 to 4095 range.  It is
+       represented in units of 0.1 dB offset from -140 dBm/Hz."
+   SYNTAX      OCTET STRING (SIZE(0..128))
+
+END
diff --git a/snmp_builder/mibs/VPN-TC-STD-MIB.mib b/snmp_builder/mibs/VPN-TC-STD-MIB.mib
new file mode 100644
index 0000000..d37e4e7
--- /dev/null
+++ b/snmp_builder/mibs/VPN-TC-STD-MIB.mib
@@ -0,0 +1,72 @@
+VPN-TC-STD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+vpnTcMIB MODULE-IDENTITY
+    LAST-UPDATED "200511150000Z"  -- 15 November 2005
+    ORGANIZATION
+        "Layer 3 Virtual Private Networks (L3VPN) Working Group."
+
+    CONTACT-INFO
+        "Benson Schliesser
+         bensons@savvis.net
+
+         Thomas D. Nadeau
+         tnadeau@cisco.com
+
+         This TC MIB is a product of the PPVPN
+         http://www.ietf.org/html.charters/ppvpn-charter.html
+         and subsequently the L3VPN
+         http://www.ietf.org/html.charters/l3vpn-charter.html
+         working groups.
+
+         Comments and discussion should be directed to
+         l3vpn@ietf.org"
+    DESCRIPTION
+        "This MIB contains TCs for VPNs.
+
+         Copyright (C) The Internet Society (2005).  This version
+         of this MIB module is part of RFC 4265;  see the RFC
+         itself for full legal notices."
+    -- Revision history.
+    REVISION "200511150000Z"  -- 15 November 2005
+    DESCRIPTION "Initial version, published as RFC 4265."
+    ::= { mib-2 129 }
+
+-- definition of textual conventions
+
+VPNId ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "The purpose of a VPN-ID is to uniquely identify a VPN.
+         The Global VPN Identifier format is:
+         3 octet VPN Authority, Organizationally Unique Identifier
+         followed by 4 octet VPN index identifying VPN according
+         to OUI"
+    REFERENCE
+        "Fox, B. and Gleeson, B., 'Virtual Private Networks
+         Identifier', RFC 2685, September 1999."
+    SYNTAX    OCTET STRING (SIZE (7))
+
+VPNIdOrZero ::= TEXTUAL-CONVENTION
+    STATUS            current
+    DESCRIPTION
+        "This textual convention is an extension of the
+         VPNId textual convention that defines a non-zero-length
+         OCTET STRING to identify a physical entity.  This extension
+         permits the additional value of a zero-length OCTET STRING.
+
+         The semantics of the value zero-length OCTET STRING are
+         object-specific and must therefore be defined
+         as part of the description of any object that uses this
+         syntax.  Examples of usage of this extension are
+         situations where none or all VPN IDs need to be
+         referenced."
+    SYNTAX    OCTET STRING (SIZE (0 | 7))
+
+END
diff --git a/snmp_builder/mibs/VRRP-MIB.mib b/snmp_builder/mibs/VRRP-MIB.mib
new file mode 100644
index 0000000..4044aa8
--- /dev/null
+++ b/snmp_builder/mibs/VRRP-MIB.mib
@@ -0,0 +1,789 @@
+VRRP-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE,
+     NOTIFICATION-TYPE, Counter32,
+     Integer32, IpAddress, mib-2         FROM SNMPv2-SMI
+
+     TEXTUAL-CONVENTION, RowStatus,
+     MacAddress, TruthValue, TimeStamp   FROM SNMPv2-TC
+
+     MODULE-COMPLIANCE, OBJECT-GROUP,
+     NOTIFICATION-GROUP                  FROM SNMPv2-CONF
+     ifIndex                             FROM IF-MIB;
+
+ vrrpMIB  MODULE-IDENTITY
+     LAST-UPDATED "200003030000Z"
+     ORGANIZATION "IETF VRRP Working Group"
+     CONTACT-INFO
+            "Brian R. Jewell
+     Postal: Copper Mountain Networks, Inc.
+             2470 Embarcadero Way
+             Palo Alto, California 94303
+     Tel:    +1 650 687 3367
+     E-Mail: bjewell@coppermountain.com"
+     DESCRIPTION
+         "This MIB describes objects used for managing Virtual Router
+          Redundancy Protocol (VRRP) routers."
+     REVISION "200003030000Z"    -- 03 Mar 2000
+     DESCRIPTION "Initial version as published in RFC 2787."
+     ::= { mib-2 68 }
+
+-- *******************************************************************
+--  Textual Conventions
+-- *******************************************************************
+
+ VrId ::= TEXTUAL-CONVENTION
+     STATUS       current
+     DESCRIPTION
+         "A number which, along with an interface index (ifIndex),
+         serves to uniquely identify a virtual router on a given VRRP
+         router. A set of one or more associated addresses is assigned
+         to a VRID."
+     SYNTAX      Integer32 (1..255)
+
+-- *******************************************************************
+--  VRRP MIB Groups
+-- *******************************************************************
+
+ vrrpOperations      OBJECT IDENTIFIER ::= { vrrpMIB 1 }
+ vrrpStatistics      OBJECT IDENTIFIER ::= { vrrpMIB 2 }
+ vrrpConformance     OBJECT IDENTIFIER ::= { vrrpMIB 3 }
+
+-- *******************************************************************
+--  Start of MIB objects
+-- *******************************************************************
+
+ vrrpNodeVersion  OBJECT-TYPE
+     SYNTAX       Integer32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+        "This value identifies the particular version of the VRRP
+         supported by this node."
+     ::= { vrrpOperations 1 }
+
+ vrrpNotificationCntl  OBJECT-TYPE
+     SYNTAX       INTEGER {
+         enabled     (1),
+         disabled    (2)
+     }
+     MAX-ACCESS   read-write
+     STATUS       current
+     DESCRIPTION
+        "Indicates whether the VRRP-enabled router will generate
+         SNMP traps for events defined in this MIB. 'Enabled'
+         results in SNMP traps; 'disabled', no traps are sent."
+     DEFVAL { enabled }
+     ::= { vrrpOperations 2 }
+
+-- *******************************************************************
+--  VRRP Operations Table
+-- *******************************************************************
+
+ vrrpOperTable OBJECT-TYPE
+     SYNTAX       SEQUENCE OF VrrpOperEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "Operations table for a VRRP router which consists of a
+          sequence (i.e., one or more conceptual rows) of
+          'vrrpOperEntry' items."
+     ::= { vrrpOperations 3 }
+
+ vrrpOperEntry OBJECT-TYPE
+     SYNTAX       VrrpOperEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "An entry in the vrrpOperTable containing the operational
+          characteristics of a virtual router. On a VRRP router,
+          a given virtual router is identified by a combination
+          of the IF index and VRID.
+
+          Rows in the table cannot be modified unless the value
+          of `vrrpOperAdminState' is `disabled' and the
+          `vrrpOperState' has transitioned to `initialize'."
+     INDEX    { ifIndex, vrrpOperVrId }
+     ::= { vrrpOperTable 1 }
+
+ VrrpOperEntry ::=
+     SEQUENCE {
+         vrrpOperVrId
+             VrId,
+         vrrpOperVirtualMacAddr
+             MacAddress,
+         vrrpOperState
+             INTEGER,
+         vrrpOperAdminState
+             INTEGER,
+         vrrpOperPriority
+             Integer32,
+         vrrpOperIpAddrCount
+             Integer32,
+         vrrpOperMasterIpAddr
+             IpAddress,
+         vrrpOperPrimaryIpAddr
+             IpAddress,
+         vrrpOperAuthType
+             INTEGER,
+         vrrpOperAuthKey
+             OCTET STRING,
+         vrrpOperAdvertisementInterval
+             Integer32,
+         vrrpOperPreemptMode
+             TruthValue,
+         vrrpOperVirtualRouterUpTime
+             TimeStamp,
+         vrrpOperProtocol
+
+             INTEGER,
+         vrrpOperRowStatus
+             RowStatus
+ }
+
+ vrrpOperVrId OBJECT-TYPE
+     SYNTAX       VrId
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "This object contains the Virtual Router Identifier (VRID)."
+     ::= { vrrpOperEntry 1 }
+
+ vrrpOperVirtualMacAddr OBJECT-TYPE
+     SYNTAX       MacAddress
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The virtual MAC address of the virtual router. Although this
+         object can be derived from the 'vrrpOperVrId' object, it is
+         defined so that it is easily obtainable by a management
+         application and can be included in VRRP-related SNMP traps."
+     ::= { vrrpOperEntry 2 }
+
+ vrrpOperState OBJECT-TYPE
+     SYNTAX       INTEGER {
+         initialize(1),
+         backup(2),
+         master(3)
+     }
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The current state of the virtual router. This object has
+         three defined values:
+
+           - `initialize', which indicates that all the
+             virtual router is waiting for a startup event.
+
+           - `backup', which indicates the virtual router is
+             monitoring the availability of the master router.
+
+           - `master', which indicates that the virtual router
+             is forwarding packets for IP addresses that are
+             associated with this router.
+
+         Setting the `vrrpOperAdminState' object (below) initiates
+
+         transitions in the value of this object."
+     ::= { vrrpOperEntry 3 }
+
+ vrrpOperAdminState OBJECT-TYPE
+     SYNTAX       INTEGER {
+         up(1),
+         down(2)
+     }
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "This object will enable/disable the virtual router
+         function. Setting the value to `up', will transition
+         the state of the virtual router from `initialize' to `backup'
+         or `master', depending on the value of `vrrpOperPriority'.
+         Setting the value to `down', will transition  the
+         router from `master' or `backup' to `initialize'. State
+         transitions may not be immediate; they sometimes depend on
+         other factors, such as the interface (IF) state.
+
+         The `vrrpOperAdminState' object must be set to `down' prior
+         to modifying the other read-create objects in the conceptual
+         row. The value of the `vrrpOperRowStatus' object (below)
+         must be `active', signifying that the conceptual row
+         is valid (i.e., the objects are correctly set),
+         in order for this object to be set to `up'."
+     DEFVAL    { down }
+     ::= { vrrpOperEntry 4 }
+
+ vrrpOperPriority OBJECT-TYPE
+     SYNTAX       Integer32 (0..255)
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "This object specifies the priority to be used for the
+         virtual router master election process. Higher values imply
+         higher priority.
+
+         A priority of '0', although not settable, is sent by
+         the master router to indicate that this router has ceased
+         to participate in VRRP and a backup virtual router should
+         transition  to become a new master.
+
+         A priority of 255 is used for the router that owns the
+         associated IP address(es)."
+     DEFVAL       { 100 }
+     ::= { vrrpOperEntry 5 }
+
+ vrrpOperIpAddrCount OBJECT-TYPE
+     SYNTAX       Integer32 (0..255)
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The number of IP addresses that are associated with this
+         virtual router. This number is equal to the number of rows
+         in the vrrpAssoIpAddrTable that correspond to a given IF
+         index/VRID pair."
+     ::= { vrrpOperEntry 6 }
+
+ vrrpOperMasterIpAddr OBJECT-TYPE
+     SYNTAX       IpAddress
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The master router's real (primary) IP address. This is
+         the IP address listed as the source in VRRP advertisement
+         last received by this virtual router."
+     ::= { vrrpOperEntry 7 }
+
+ vrrpOperPrimaryIpAddr OBJECT-TYPE
+     SYNTAX       IpAddress
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "In the case where there is more than one IP address for
+         a given `ifIndex', this object is used to specify the IP
+         address that will become the `vrrpOperMasterIpAddr', should
+         the virtual router transition from backup to master. If
+         this object is set to 0.0.0.0, the IP address which is
+         numerically lowest will be selected."
+     DEFVAL       { '00000000'H } -- 0.0.0.0
+     ::= { vrrpOperEntry 8 }
+
+ vrrpOperAuthType OBJECT-TYPE
+     SYNTAX       INTEGER {
+         noAuthentication(1),       -- VRRP protocol exchanges are not
+                                    -- authenticated.
+         simpleTextPassword(2),     -- Exchanges are authenticated by a
+                                    -- clear text password.
+         ipAuthenticationHeader(3)  -- Exchanges are authenticated using
+                                    -- the IP authentication header.
+     }
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "Authentication type used for VRRP protocol exchanges between
+         virtual routers. This value of this object is the same for a
+         given ifIndex.
+
+         New enumerations to this list can only be added via a new
+         RFC on the standards track."
+     DEFVAL       { noAuthentication }
+     ::= { vrrpOperEntry 9 }
+
+ vrrpOperAuthKey OBJECT-TYPE
+     SYNTAX       OCTET STRING (SIZE (0..16))
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "The Authentication Key. This object is set according to
+         the value of the 'vrrpOperAuthType' object
+         ('simpleTextPassword' or 'ipAuthenticationHeader'). If the
+         length of the value is less than 16 octets, the agent will
+         left adjust and zero fill to 16 octets. The value of this
+         object is the same for a given ifIndex.
+
+         When read, vrrpOperAuthKey always returns an Octet String
+         of length zero."
+     ::= { vrrpOperEntry 10 }
+
+ vrrpOperAdvertisementInterval OBJECT-TYPE
+     SYNTAX       Integer32 (1..255)
+     UNITS        "seconds"
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "The time interval, in seconds, between sending
+         advertisement messages. Only the master router sends
+         VRRP advertisements."
+     DEFVAL       { 1 }
+     ::= { vrrpOperEntry 11 }
+
+ vrrpOperPreemptMode OBJECT-TYPE
+     SYNTAX       TruthValue
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "Controls whether a higher priority virtual router will
+         preempt a lower priority master."
+     DEFVAL       { true }
+     ::= { vrrpOperEntry 12 }
+
+ vrrpOperVirtualRouterUpTime OBJECT-TYPE
+     SYNTAX       TimeStamp
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "This is the value of the `sysUpTime' object when this
+         virtual router (i.e., the `vrrpOperState') transitioned
+         out of `initialized'."
+     ::= { vrrpOperEntry 13 }
+
+ vrrpOperProtocol OBJECT-TYPE
+     SYNTAX   INTEGER {
+         ip (1),
+         bridge (2),
+         decnet (3),
+         other (4)
+     }
+     MAX-ACCESS read-create
+     STATUS     current
+     DESCRIPTION
+         "The particular protocol being controlled by this Virtual
+         Router.
+
+         New enumerations to this list can only be added via a new
+         RFC on the standards track."
+     DEFVAL { ip }
+     ::= { vrrpOperEntry 14 }
+
+ vrrpOperRowStatus OBJECT-TYPE
+     SYNTAX       RowStatus
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "The row status variable, used in accordance to installation
+         and removal conventions for conceptual rows. The rowstatus of
+         a currently active row in the vrrpOperTable is constrained
+         by the operational state of the corresponding virtual router.
+         When `vrrpOperRowStatus' is set to active(1), no other
+         objects in the conceptual row, with the exception of
+         `vrrpOperAdminState', can be modified. Prior to setting the
+         `vrrpOperRowStatus' object from `active' to a different value,
+         the `vrrpOperAdminState' object must be set to `down' and the
+         `vrrpOperState' object be transitioned to `initialize'.
+
+         To create a row in this table, a manager sets this object
+         to either createAndGo(4) or createAndWait(5). Until instances
+         of all corresponding columns are appropriately configured,
+         the value of the corresponding instance of the `vrrpOperRowStatus'
+         column will be read as notReady(3).
+
+         In particular, a newly created row cannot be made active(1)
+         until (minimally) the corresponding instance of
+         `vrrpOperVrId' has been set and there is at least one active
+         row in the `vrrpAssoIpAddrTable' defining an associated
+         IP address for the virtual router."
+     ::= { vrrpOperEntry 15 }
+
+-- *******************************************************************
+--  VRRP Associated IP Address Table
+-- *******************************************************************
+
+ vrrpAssoIpAddrTable OBJECT-TYPE
+     SYNTAX       SEQUENCE OF VrrpAssoIpAddrEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "The table of addresses associated with this virtual router."
+     ::= { vrrpOperations 4 }
+
+ vrrpAssoIpAddrEntry OBJECT-TYPE
+     SYNTAX       VrrpAssoIpAddrEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "An entry in the table contains an IP address that is
+         associated with a virtual router. The number of rows for
+         a given ifIndex and VrId will equal the number of IP
+         addresses associated (e.g., backed up) by the virtual
+         router (equivalent to 'vrrpOperIpAddrCount').
+
+         Rows in the table cannot be modified unless the value
+         of `vrrpOperAdminState' is `disabled' and the
+         `vrrpOperState' has transitioned to `initialize'."
+     INDEX    { ifIndex, vrrpOperVrId, vrrpAssoIpAddr }
+     ::= { vrrpAssoIpAddrTable 1 }
+
+ VrrpAssoIpAddrEntry ::=
+     SEQUENCE {
+         vrrpAssoIpAddr
+             IpAddress,
+         vrrpAssoIpAddrRowStatus
+             RowStatus
+ }
+
+ vrrpAssoIpAddr OBJECT-TYPE
+     SYNTAX       IpAddress
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "The assigned IP addresses that a virtual router is
+         responsible for backing up."
+     ::= { vrrpAssoIpAddrEntry 1 }
+
+ vrrpAssoIpAddrRowStatus OBJECT-TYPE
+     SYNTAX       RowStatus
+     MAX-ACCESS   read-create
+     STATUS       current
+     DESCRIPTION
+         "The row status variable, used according to installation
+         and removal conventions for conceptual rows. Setting this
+         object to active(1) or createAndGo(4) results in the
+         addition of an associated address for a virtual router.
+         Destroying the entry or setting it to notInService(2)
+         removes the associated address from the virtual router.
+         The use of other values is implementation-dependent."
+     ::= { vrrpAssoIpAddrEntry 2 }
+
+-- *******************************************************************
+--  VRRP Router Statistics
+-- *******************************************************************
+
+ vrrpRouterChecksumErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets received with an invalid
+         VRRP checksum value."
+     ::= { vrrpStatistics 1 }
+
+ vrrpRouterVersionErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets received with an unknown
+         or unsupported version number."
+     ::= { vrrpStatistics 2 }
+
+ vrrpRouterVrIdErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets received with an invalid
+         VRID for this virtual router."
+     ::= { vrrpStatistics 3 }
+
+-- *******************************************************************
+--  VRRP Router Statistics Table
+-- *******************************************************************
+
+ vrrpRouterStatsTable OBJECT-TYPE
+     SYNTAX       SEQUENCE OF VrrpRouterStatsEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "Table of virtual router statistics."
+     ::= { vrrpStatistics 4 }
+
+ vrrpRouterStatsEntry OBJECT-TYPE
+     SYNTAX       VrrpRouterStatsEntry
+     MAX-ACCESS   not-accessible
+     STATUS       current
+     DESCRIPTION
+         "An entry in the table, containing statistics information
+         about a given virtual router."
+     AUGMENTS    { vrrpOperEntry }
+     ::= { vrrpRouterStatsTable 1 }
+
+ VrrpRouterStatsEntry ::=
+     SEQUENCE {
+         vrrpStatsBecomeMaster
+             Counter32,
+         vrrpStatsAdvertiseRcvd
+             Counter32,
+         vrrpStatsAdvertiseIntervalErrors
+             Counter32,
+         vrrpStatsAuthFailures
+             Counter32,
+         vrrpStatsIpTtlErrors
+             Counter32,
+         vrrpStatsPriorityZeroPktsRcvd
+             Counter32,
+         vrrpStatsPriorityZeroPktsSent
+             Counter32,
+         vrrpStatsInvalidTypePktsRcvd
+             Counter32,
+         vrrpStatsAddressListErrors
+             Counter32,
+         vrrpStatsInvalidAuthType
+
+             Counter32,
+         vrrpStatsAuthTypeMismatch
+             Counter32,
+         vrrpStatsPacketLengthErrors
+             Counter32
+     }
+
+ vrrpStatsBecomeMaster OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of times that this virtual router's state
+         has transitioned to MASTER."
+     ::= { vrrpRouterStatsEntry 1 }
+
+ vrrpStatsAdvertiseRcvd OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP advertisements received by this
+         virtual router."
+     ::= { vrrpRouterStatsEntry 2 }
+
+ vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP advertisement packets received
+         for which the advertisement interval is different than the
+         one configured for the local virtual router."
+     ::= { vrrpRouterStatsEntry 3 }
+
+ vrrpStatsAuthFailures OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets received that do not pass
+         the authentication check."
+     ::= { vrrpRouterStatsEntry 4 }
+
+ vrrpStatsIpTtlErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets received by the virtual
+         router with IP TTL (Time-To-Live) not equal to 255."
+     ::= { vrrpRouterStatsEntry 5 }
+
+ vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets received by the virtual
+         router with a priority of '0'."
+     ::= { vrrpRouterStatsEntry 6 }
+
+ vrrpStatsPriorityZeroPktsSent OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of VRRP packets sent by the virtual router
+         with a priority of '0'."
+     ::= { vrrpRouterStatsEntry 7 }
+
+ vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The number of VRRP packets received by the virtual router
+         with an invalid value in the 'type' field."
+     ::= { vrrpRouterStatsEntry 8 }
+
+ vrrpStatsAddressListErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of packets received for which the address
+         list does not match the locally configured list for the
+         virtual router."
+     ::= { vrrpRouterStatsEntry 9 }
+
+ vrrpStatsInvalidAuthType OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of packets received with an unknown
+
+         authentication type."
+     ::= { vrrpRouterStatsEntry 10 }
+
+ vrrpStatsAuthTypeMismatch OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of packets received with 'Auth Type' not
+         equal to the locally configured authentication method
+         (`vrrpOperAuthType')."
+     ::= { vrrpRouterStatsEntry 11 }
+
+ vrrpStatsPacketLengthErrors OBJECT-TYPE
+     SYNTAX       Counter32
+     MAX-ACCESS   read-only
+     STATUS       current
+     DESCRIPTION
+         "The total number of packets received with a packet length
+         less than the length of the VRRP header."
+     ::= { vrrpRouterStatsEntry 12 }
+
+-- *******************************************************************
+--   Trap Definitions
+-- *******************************************************************
+
+ vrrpNotifications   OBJECT IDENTIFIER ::= { vrrpMIB 0 }
+
+ vrrpTrapPacketSrc OBJECT-TYPE
+     SYNTAX       IpAddress
+     MAX-ACCESS   accessible-for-notify
+     STATUS       current
+     DESCRIPTION
+         "The IP address of an inbound VRRP packet. Used by
+          vrrpTrapAuthFailure trap."
+     ::= { vrrpOperations 5 }
+
+ vrrpTrapAuthErrorType OBJECT-TYPE
+     SYNTAX        INTEGER {
+         invalidAuthType (1),
+         authTypeMismatch (2),
+         authFailure (3)
+     }
+     MAX-ACCESS   accessible-for-notify
+     STATUS       current
+     DESCRIPTION
+         "Potential types of configuration conflicts.
+         Used by vrrpAuthFailure trap."
+     ::= { vrrpOperations 6 }
+
+ vrrpTrapNewMaster NOTIFICATION-TYPE
+     OBJECTS      { vrrpOperMasterIpAddr
+                  }
+     STATUS       current
+     DESCRIPTION
+         "The newMaster trap indicates that the sending agent
+         has transitioned to 'Master' state."
+     ::= { vrrpNotifications 1 }
+
+ vrrpTrapAuthFailure NOTIFICATION-TYPE
+     OBJECTS      { vrrpTrapPacketSrc,
+                    vrrpTrapAuthErrorType
+                  }
+     STATUS       current
+     DESCRIPTION
+         "A vrrpAuthFailure trap signifies that a packet has
+         been received from a router whose authentication key
+         or authentication type conflicts with this router's
+         authentication key or authentication type. Implementation
+         of this trap is optional."
+     ::= { vrrpNotifications 2 }
+
+-- *******************************************************************
+--  Conformance Information
+-- *******************************************************************
+
+ vrrpMIBCompliances  OBJECT IDENTIFIER ::= { vrrpConformance 1 }
+ vrrpMIBGroups       OBJECT IDENTIFIER ::= { vrrpConformance 2 }
+
+-- ...................................................................
+-- Compliance Statements
+-- ...................................................................
+
+ vrrpMIBCompliance MODULE-COMPLIANCE
+     STATUS current
+     DESCRIPTION
+        "The core compliance statement for all VRRP implementations."
+     MODULE -- this module
+     MANDATORY-GROUPS  {
+         vrrpOperGroup,
+         vrrpStatsGroup
+     }
+     OBJECT        vrrpOperPriority
+     WRITE-SYNTAX  Integer32 (1..255)
+     DESCRIPTION  "SETable values are from 1 to 255."
+     ::= { vrrpMIBCompliances 1 }
+
+-- ...................................................................
+-- Conformance Groups
+-- ...................................................................
+
+ vrrpOperGroup  OBJECT-GROUP
+     OBJECTS  {
+         vrrpNodeVersion,
+         vrrpNotificationCntl,
+         vrrpOperVirtualMacAddr,
+         vrrpOperState,
+         vrrpOperAdminState,
+         vrrpOperPriority,
+         vrrpOperIpAddrCount,
+         vrrpOperMasterIpAddr,
+         vrrpOperPrimaryIpAddr,
+         vrrpOperAuthType,
+         vrrpOperAuthKey,
+         vrrpOperAdvertisementInterval,
+         vrrpOperPreemptMode,
+         vrrpOperVirtualRouterUpTime,
+         vrrpOperProtocol,
+         vrrpOperRowStatus,
+         vrrpAssoIpAddrRowStatus
+         }
+     STATUS current
+     DESCRIPTION
+        "Conformance group for VRRP operations."
+     ::= { vrrpMIBGroups 1 }
+
+ vrrpStatsGroup  OBJECT-GROUP
+     OBJECTS  {
+         vrrpRouterChecksumErrors,
+         vrrpRouterVersionErrors,
+         vrrpRouterVrIdErrors,
+         vrrpStatsBecomeMaster,
+         vrrpStatsAdvertiseRcvd,
+         vrrpStatsAdvertiseIntervalErrors,
+         vrrpStatsAuthFailures,
+         vrrpStatsIpTtlErrors,
+         vrrpStatsPriorityZeroPktsRcvd,
+         vrrpStatsPriorityZeroPktsSent,
+         vrrpStatsInvalidTypePktsRcvd,
+         vrrpStatsAddressListErrors,
+         vrrpStatsInvalidAuthType,
+         vrrpStatsAuthTypeMismatch,
+         vrrpStatsPacketLengthErrors
+
+         }
+     STATUS current
+     DESCRIPTION
+        "Conformance group for VRRP statistics."
+     ::= { vrrpMIBGroups 2 }
+
+ vrrpTrapGroup  OBJECT-GROUP
+     OBJECTS  {
+         vrrpTrapPacketSrc,
+         vrrpTrapAuthErrorType
+         }
+     STATUS current
+     DESCRIPTION
+        "Conformance group for objects contained in VRRP notifications."
+     ::= { vrrpMIBGroups 3 }
+
+ vrrpNotificationGroup NOTIFICATION-GROUP
+     NOTIFICATIONS {
+         vrrpTrapNewMaster,
+         vrrpTrapAuthFailure
+         }
+     STATUS current
+     DESCRIPTION
+        "The VRRP MIB Notification Group."
+     ::= { vrrpMIBGroups 4 }
+
+END
diff --git a/snmp_builder/mibs/WWW-MIB.mib b/snmp_builder/mibs/WWW-MIB.mib
new file mode 100644
index 0000000..4504960
--- /dev/null
+++ b/snmp_builder/mibs/WWW-MIB.mib
@@ -0,0 +1,1272 @@
+WWW-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+    Counter32, Counter64, Integer32, Unsigned32, TimeTicks
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION, DisplayString, DateAndTime, TimeInterval
+        FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP
+        FROM SNMPv2-CONF
+
+    Utf8String
+        FROM SYSAPPL-MIB;
+
+wwwMIB MODULE-IDENTITY
+    LAST-UPDATED "9902251400Z"
+    ORGANIZATION "IETF Application MIB Working Group"
+    CONTACT-INFO
+        "        Harrie Hazewinkel
+
+         Postal: Joint Research Centre of the E.C.
+                 via Fermi - Ispra 21020 (VA)
+                 Italy
+
+            Tel: +39+(0)332 786322
+            Fax: +39+(0)332 785641
+         E-mail: harrie.hazewinkel@jrc.it
+
+                 Carl W. Kalbfleisch
+
+         Postal: Verio, Inc.
+                 1950 Stemmons Freeway
+                 Suite 2006
+                 Dallas, TX 75207
+                 US
+
+            Tel: +1 214 290-8653
+            Fax: +1 214 744-0742
+         E-mail: cwk@verio.net
+
+                 Juergen Schoenwaelder
+
+         Postal: TU Braunschweig
+                 Bueltenweg 74/75
+                 38106 Braunschweig
+                 Germany
+
+            Tel: +49 531 391-3683
+            Fax: +49 531 489-5936
+         E-mail: schoenw@ibr.cs.tu-bs.de"
+    DESCRIPTION
+        "This WWW service MIB module is applicable to services
+         realized by a family of 'Document Transfer Protocols'
+         (DTP). Examples of DTPs are HTTP and FTP."
+
+       -- revision history
+
+       REVISION    "9902251400Z"
+       DESCRIPTION "Initial version, published as RFC2594."
+       ::= { mib-2 65 }
+
+--
+--  Object Identifier Assignments
+--
+
+wwwMIBObjects     OBJECT IDENTIFIER ::= { wwwMIB 1 }
+wwwMIBConformance OBJECT IDENTIFIER ::= { wwwMIB 2 }
+
+--
+-- Textual Conventions
+--
+
+WwwRequestType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The WwwRequestType defines the textual identification of
+         request types used by a document transfer protocol. For
+         the proper values for a given DTP, refer to the protocol
+         mappings for that DTP."
+    SYNTAX      OCTET STRING (SIZE (1..40))
+
+WwwResponseType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The WwwResponseType defines the different response values
+         used by document transfer protocols. For the proper values
+         for a given DTP, refer to the protocol mappings for that
+         DTP."
+    SYNTAX      Integer32 (0..2147483647)
+
+WwwOperStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The operational status of a WWW service. 'down' indicates
+         that the service is not available. 'running' indicates
+         that the service is operational and available. 'halted'
+         indicates that the service is operational but not
+         available. 'congested' indicates that the service is
+         operational but no additional inbound associations can be
+         accommodated. 'restarting' indicates that the service is
+         currently unavailable but is in the process of restarting
+         and will be available soon."
+    SYNTAX      INTEGER {
+                    down(1),
+                    running(2),
+                    halted(3),
+                    congested(4),
+                    restarting(5)
+                }
+
+WwwDocName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION
+        "The server relative name of a document. If the URL were
+         http://www.x.org/standards/search/search.cgi?string=test
+         then the value of this textual convention would resolve
+         to '/standards/search/search.cgi'. This textual convention
+         uses the character set for URIs as defined in RFC 2396
+         section 2."
+    SYNTAX      OCTET STRING (SIZE (0..255))
+
+-- The WWW Service Information Group
+--
+-- The WWW service information group contains information about
+-- the WWW services known by the SNMP agent.
+
+wwwService OBJECT IDENTIFIER ::= { wwwMIBObjects 1 }
+
+wwwServiceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of the WWW services known by the SNMP agent."
+    ::= { wwwService 1 }
+
+wwwServiceEntry OBJECT-TYPE
+    SYNTAX      WwwServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Details about a particular WWW service."
+    INDEX       { wwwServiceIndex }
+    ::= { wwwServiceTable 1 }
+
+WwwServiceEntry ::= SEQUENCE {
+    wwwServiceIndex             Unsigned32,
+    wwwServiceDescription       Utf8String,
+    wwwServiceContact           Utf8String,
+    wwwServiceProtocol          OBJECT IDENTIFIER,
+    wwwServiceName              DisplayString,
+    wwwServiceType              INTEGER,
+    wwwServiceStartTime         DateAndTime,
+    wwwServiceOperStatus        WwwOperStatus,
+    wwwServiceLastChange        DateAndTime
+}
+
+wwwServiceIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An integer used to uniquely identify a WWW service. The
+         value must be the same as the corresponding value of the
+         applSrvIndex defined in the Application Management MIB
+         (APPLICATION-MIB) if the applSrvIndex object is available.
+         It might be necessary to manually configure sub-agents in
+         order to meet this requirement."
+    ::= { wwwServiceEntry 1 }
+
+wwwServiceDescription OBJECT-TYPE
+    SYNTAX      Utf8String
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Textual description of the WWW service. This shall include
+         at least the vendor and version number of the application
+         realizing the WWW service. In a minimal case, this might
+         be the Product Token (see RFC 2068) for the application."
+    ::= { wwwServiceEntry 2 }
+
+wwwServiceContact OBJECT-TYPE
+    SYNTAX      Utf8String
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The textual identification of the contact person for this
+         service, together with information on how to contact this
+         person. For instance, this might be a string containing an
+         email address, e.g. '<webmaster@domain.name>'."
+    ::= { wwwServiceEntry 3 }
+
+wwwServiceProtocol OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An identification of the primary protocol in use by this
+         service. For Internet applications, the IANA maintains
+         a registry of the OIDs which correspond to well-known
+         application protocols.  If the application protocol is not
+         listed in the registry, an OID value of the form
+
+         {applTCPProtoID port} or {applUDPProtoID port} are used for
+         TCP-based and UDP-based protocols, respectively. In either
+         case 'port' corresponds to the primary port number being
+         used by the protocol."
+    REFERENCE
+        "The OID values applTCPProtoID and applUDPProtoID are
+         defined in the NETWORK-SERVICES-MIB (RFC 2248)."
+    ::= { wwwServiceEntry 4 }
+
+wwwServiceName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The fully qualified domain name by which this service is
+         known. This object must contain the virtual host name if
+         the service is realized for a virtual host."
+    ::= { wwwServiceEntry 5 }
+
+wwwServiceType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    wwwOther(1),
+                    wwwServer(2),
+                    wwwClient(3),
+                    wwwProxy(4),
+                    wwwCachingProxy(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The application type using or realizing this WWW service."
+    ::= { wwwServiceEntry 6 }
+
+wwwServiceStartTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when this WWW service was last started.
+         The value SHALL be '0000000000000000'H if the last start
+         time of this WWW service is not known."
+    ::= { wwwServiceEntry 7 }
+
+wwwServiceOperStatus OBJECT-TYPE
+    SYNTAX      WwwOperStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates the operational status of the WWW service."
+    ::= { wwwServiceEntry 8 }
+
+wwwServiceLastChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when this WWW service entered its current
+         operational state. The value SHALL be '0000000000000000'H if
+         the time of the last state change is not known."
+    ::= { wwwServiceEntry 9 }
+
+-- The WWW Protocol Statistics Group
+--
+-- The WWW protocol statistics group contains statistics about
+-- the DTP requests and responses sent or received.
+
+wwwProtocolStatistics OBJECT IDENTIFIER ::= { wwwMIBObjects 2 }
+
+wwwSummaryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwSummaryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table providing overview statistics for the
+         WWW services on this system."
+    ::= { wwwProtocolStatistics 1 }
+
+wwwSummaryEntry OBJECT-TYPE
+    SYNTAX      WwwSummaryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Overview statistics for an individual service."
+    INDEX       { wwwServiceIndex }
+    ::= { wwwSummaryTable 1 }
+
+WwwSummaryEntry ::= SEQUENCE {
+    wwwSummaryInRequests        Counter32,
+    wwwSummaryOutRequests       Counter32,
+    wwwSummaryInResponses       Counter32,
+    wwwSummaryOutResponses      Counter32,
+    wwwSummaryInBytes           Counter64,
+    wwwSummaryInLowBytes        Counter32,
+    wwwSummaryOutBytes          Counter64,
+    wwwSummaryOutLowBytes       Counter32
+}
+
+wwwSummaryInRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of requests successfully received."
+    ::= { wwwSummaryEntry 1 }
+
+wwwSummaryOutRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of requests generated."
+    ::= { wwwSummaryEntry 2 }
+
+wwwSummaryInResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of responses successfully received."
+    ::= { wwwSummaryEntry 3 }
+
+wwwSummaryOutResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of responses generated."
+    ::= { wwwSummaryEntry 4 }
+
+wwwSummaryInBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes received."
+    ::= { wwwSummaryEntry 5 }
+
+wwwSummaryInLowBytes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The lowest thirty-two bits of wwwSummaryInBytes."
+    ::= { wwwSummaryEntry 6 }
+
+wwwSummaryOutBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes transmitted."
+    ::= { wwwSummaryEntry 7 }
+
+wwwSummaryOutLowBytes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The lowest thirty-two bits of wwwSummaryOutBytes."
+    ::= { wwwSummaryEntry 8 }
+
+-- The WWW request tables contain detailed information about
+-- requests send or received by WWW services.
+
+wwwRequestInTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwRequestInEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table providing detailed statistics for requests
+         received by WWW services on this system."
+    ::= { wwwProtocolStatistics 2 }
+
+wwwRequestInEntry OBJECT-TYPE
+    SYNTAX      WwwRequestInEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Request statistics for an individual service."
+    INDEX       { wwwServiceIndex, wwwRequestInIndex }
+    ::= { wwwRequestInTable 1 }
+
+WwwRequestInEntry ::= SEQUENCE {
+    wwwRequestInIndex           WwwRequestType,
+    wwwRequestInRequests        Counter32,
+    wwwRequestInBytes           Counter32,
+    wwwRequestInLastTime        DateAndTime
+}
+
+wwwRequestInIndex OBJECT-TYPE
+    SYNTAX      WwwRequestType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The particular request type the statistics apply to."
+    ::= { wwwRequestInEntry 1 }
+
+wwwRequestInRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of requests of this type received by this
+         WWW service."
+    ::= { wwwRequestInEntry 2 }
+
+wwwRequestInBytes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes per request type received
+         by this WWW service."
+    ::= { wwwRequestInEntry 3 }
+
+wwwRequestInLastTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the last byte of the last complete
+         request of this type was received by this WWW service. The
+         value SHALL be '0000000000000000'H if no request of this
+         type has been received yet."
+    ::= { wwwRequestInEntry 4 }
+
+wwwRequestOutTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwRequestOutEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table providing detailed statistics for requests
+         generated by the services on this system."
+    ::= { wwwProtocolStatistics 3 }
+
+wwwRequestOutEntry OBJECT-TYPE
+    SYNTAX      WwwRequestOutEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Request statistics for an individual service."
+    INDEX       { wwwServiceIndex, wwwRequestOutIndex }
+    ::= { wwwRequestOutTable 1 }
+
+WwwRequestOutEntry ::= SEQUENCE {
+    wwwRequestOutIndex          WwwRequestType,
+    wwwRequestOutRequests       Counter32,
+    wwwRequestOutBytes          Counter32,
+    wwwRequestOutLastTime       DateAndTime
+}
+
+wwwRequestOutIndex OBJECT-TYPE
+    SYNTAX      WwwRequestType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The particular request type the statistics apply to."
+    ::= { wwwRequestOutEntry 1 }
+
+wwwRequestOutRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of requests of this type generated by this
+         WWW service."
+    ::= { wwwRequestOutEntry 2 }
+
+wwwRequestOutBytes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes per requests type generated
+         by this WWW service."
+    ::= { wwwRequestOutEntry 3 }
+
+wwwRequestOutLastTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the first byte of the last request
+         of this type was send by this WWW service. The value SHALL
+         be '0000000000000000'H if no request of this type has been
+         send yet."
+    ::= { wwwRequestOutEntry 4 }
+
+-- The WWW response tables contain detailed information about
+-- responses sent or received by WWW services.
+
+wwwResponseInTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwResponseInEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table providing detailed statistics for responses
+         received by WWW services on this system."
+    ::= { wwwProtocolStatistics 4 }
+
+wwwResponseInEntry OBJECT-TYPE
+    SYNTAX      WwwResponseInEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Response statistics for an individual service."
+    INDEX       { wwwServiceIndex, wwwResponseInIndex }
+    ::= { wwwResponseInTable 1 }
+
+WwwResponseInEntry ::= SEQUENCE {
+    wwwResponseInIndex          WwwResponseType,
+    wwwResponseInResponses      Counter32,
+    wwwResponseInBytes          Counter32,
+    wwwResponseInLastTime       DateAndTime
+}
+
+wwwResponseInIndex OBJECT-TYPE
+    SYNTAX      WwwResponseType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The particular response type the statistics apply to."
+    ::= { wwwResponseInEntry 1 }
+
+wwwResponseInResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of responses of this type received by this
+         WWW service."
+    ::= { wwwResponseInEntry 2 }
+
+wwwResponseInBytes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes per response type received
+         by this WWW service."
+    ::= { wwwResponseInEntry 3 }
+
+wwwResponseInLastTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the last byte of the last complete
+         response of this type was received by this WWW service. The
+         value SHALL be '0000000000000000'H if no response of this
+         type has been received yet."
+    ::= { wwwResponseInEntry 4 }
+
+wwwResponseOutTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwResponseOutEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table providing detailed statistics for responses
+         generated by services on this system."
+    ::= { wwwProtocolStatistics 5 }
+
+wwwResponseOutEntry OBJECT-TYPE
+    SYNTAX      WwwResponseOutEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Response statistics for an individual service."
+    INDEX       { wwwServiceIndex, wwwResponseOutIndex }
+    ::= { wwwResponseOutTable 1 }
+
+WwwResponseOutEntry ::= SEQUENCE {
+    wwwResponseOutIndex         WwwResponseType,
+    wwwResponseOutResponses     Counter32,
+    wwwResponseOutBytes         Counter32,
+    wwwResponseOutLastTime      DateAndTime
+}
+
+wwwResponseOutIndex OBJECT-TYPE
+    SYNTAX      WwwResponseType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The particular response type the statistics apply to."
+    ::= { wwwResponseOutEntry 1 }
+
+wwwResponseOutResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of responses of this type generated by this
+         WWW service."
+    ::= { wwwResponseOutEntry 2 }
+
+wwwResponseOutBytes OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes per response type generated
+
+         by this WWW service."
+    ::= { wwwResponseOutEntry 3 }
+
+wwwResponseOutLastTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the first byte of the last response of
+         this type was sent by this WWW service. The value SHALL be
+         '0000000000000000'H if response of this type has been send
+         yet."
+    ::= { wwwResponseOutEntry 4 }
+
+-- The WWW Document Statistics Group
+--
+-- The WWW document statistics group contains statistics about
+-- document read attempts.
+
+wwwDocumentStatistics OBJECT IDENTIFIER ::= { wwwMIBObjects 3 }
+
+wwwDocCtrlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwDocCtrlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table which controls how the MIB implementation
+         collects and maintains document statistics."
+    ::= { wwwDocumentStatistics 1 }
+
+wwwDocCtrlEntry OBJECT-TYPE
+    SYNTAX      WwwDocCtrlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry used to configure the wwwDocLastNTable,
+         the wwwDocBucketTable, the wwwDocAccessTopNTable,
+         and the wwwDocBytesTopNTable."
+    INDEX       { wwwServiceIndex }
+    ::= { wwwDocCtrlTable 1 }
+
+WwwDocCtrlEntry ::= SEQUENCE {
+    wwwDocCtrlLastNSize           Unsigned32,
+    wwwDocCtrlLastNLock           TimeTicks,
+    wwwDocCtrlBuckets             Unsigned32,
+    wwwDocCtrlBucketTimeInterval  TimeInterval,
+    wwwDocCtrlTopNSize            Unsigned32
+}
+
+wwwDocCtrlLastNSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries in the wwwDocLastNTable."
+    DEFVAL { 25 }
+    ::= { wwwDocCtrlEntry 1 }
+
+wwwDocCtrlLastNLock OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object allows a manager to lock the wwwDocLastNTable
+         in order to retrieve the wwwDocLastNTable in a consistent
+         state. The agent is expected to take a snapshot of the
+         wwwDocLastNTable when it is locked and to continue updating
+         the real wwwDocLastNTable table so that recent information is
+         available as soon as the wwwDocLastNTable is unlocked again.
+
+         Setting this object to a value greater than 0 will lock
+         the table. The timer ticks backwards until it reaches 0.
+         The table unlocks automatically once the timer reaches 0
+         and the timer stops ticking.
+
+         A manager can increase the timer to request more time to
+         read the table. However, any attempt to decrease the timer
+         will fail with an inconsistentValue error. This rule ensures
+         that multiple managers can simultaneously lock and retrieve
+         the wwwDocLastNTable. Note that managers must cooperate in
+         using wwwDocCtrlLastNLock. In particular, a manager MUST not
+         keep the wwwDocLastNTable locked when it is not necessary to
+         finish a retrieval operation."
+    ::= { wwwDocCtrlEntry 2 }
+
+wwwDocCtrlBuckets OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of buckets maintained by the agent
+         before the oldest bucket is deleted. The buckets are
+         used to populate the wwwDocAccessTopNTable and the
+         wwwDocBytesTopNTable. The time interval captured in
+         each bucket can be configured by setting the
+         wwwDocCtrlBucketTimeInterval object."
+    DEFVAL { 4 }        -- 4 buckets times 15 minutes = 1 hour
+    ::= { wwwDocCtrlEntry 3 }
+
+wwwDocCtrlBucketTimeInterval OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The time interval after which a new bucket is created.
+         Changing this object has no effect on existing buckets."
+    DEFVAL { 90000 }    -- 15 minutes (resolution .01 s)
+    ::= { wwwDocCtrlEntry 4 }
+
+wwwDocCtrlTopNSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The maximum number of entries shown in the
+         wwwDocAccessTopNTable and the wwwDocBytesTopNTable.
+         Changing this object has no effect on existing buckets."
+    DEFVAL { 25 }
+    ::= { wwwDocCtrlEntry 5 }
+
+wwwDocLastNTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwDocLastNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table which logs the last N access attempts."
+    ::= { wwwDocumentStatistics 2 }
+
+wwwDocLastNEntry OBJECT-TYPE
+    SYNTAX      WwwDocLastNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry which describes a recent access attempt."
+    INDEX       { wwwServiceIndex, wwwDocLastNIndex }
+    ::= { wwwDocLastNTable 1 }
+
+WwwDocLastNEntry ::= SEQUENCE {
+    wwwDocLastNIndex            Unsigned32,
+    wwwDocLastNName             WwwDocName,
+    wwwDocLastNTimeStamp        DateAndTime,
+    wwwDocLastNRequestType      WwwRequestType,
+    wwwDocLastNResponseType     WwwResponseType,
+    wwwDocLastNStatusMsg        Utf8String,
+    wwwDocLastNBytes            Unsigned32
+}
+
+wwwDocLastNIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary monotonically increasing integer number used
+         for indexing the wwwDocLastNTable. The first document
+         accessed appears in the table with this index value equal
+         to one. Each subsequent document is indexed with the next
+         sequential index value. The Nth document accessed will be
+         indexed by N. This table presents a sliding window of the
+         last wwwDocCtrlLastNSize documents accessed. Thus, entries
+         in this table will be indexed by N-wwwDocCtrlLastNSize
+         thru N if N > wwwDocCtrlLastNSize and 1 thru N if
+         N <= wwwDocCtrlLastNSize.
+
+         The wwwDocCtrlLastNLock attribute can be used to lock
+         this table to allow the manager to read its contents."
+    ::= { wwwDocLastNEntry 1 }
+
+wwwDocLastNName OBJECT-TYPE
+    SYNTAX      WwwDocName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The name of the document for which access was attempted."
+    ::= { wwwDocLastNEntry 2 }
+
+wwwDocLastNTimeStamp OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time of the last attempt to access this
+         document."
+    ::= { wwwDocLastNEntry 3 }
+
+wwwDocLastNRequestType OBJECT-TYPE
+    SYNTAX      WwwRequestType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocol request type which was received by the
+         server when this document access was attempted."
+    ::= { wwwDocLastNEntry 4 }
+
+wwwDocLastNResponseType OBJECT-TYPE
+    SYNTAX      WwwResponseType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocol response type which was sent to the client
+         as a result of this attempt to access a document. This
+         object contains the type of the primary response if
+         there were multiple responses to a single request."
+    ::= { wwwDocLastNEntry 5 }
+
+wwwDocLastNStatusMsg OBJECT-TYPE
+    SYNTAX      Utf8String
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object contains a human readable description of the
+         reason why the wwwDocLastNResponseType was returned to the
+         client. This object defines the implementation-specific
+         reason if the value of wwwDocLastNResponseType indicates
+         an error. For example, this object can indicate that the
+         requested document could not be transferred due to a
+         timeout condition or the document could not be transferred
+         because a 'soft link' pointing to the document could not be
+         resolved."
+    ::= { wwwDocLastNEntry 6 }
+
+wwwDocLastNBytes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of content bytes that were returned as a
+         result of this attempt to access a document."
+    ::= { wwwDocLastNEntry 7 }
+
+wwwDocBucketTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwDocBucketEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table provides administrative summary information for
+         the buckets maintained per WWW service."
+    ::= { wwwDocumentStatistics 3 }
+
+wwwDocBucketEntry OBJECT-TYPE
+    SYNTAX      WwwDocBucketEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry which describes the parameters associated with a
+         particular bucket."
+    INDEX       { wwwServiceIndex, wwwDocBucketIndex }
+    ::= { wwwDocBucketTable 1 }
+
+WwwDocBucketEntry ::= SEQUENCE {
+    wwwDocBucketIndex           Unsigned32,
+    wwwDocBucketTimeStamp       DateAndTime,
+    wwwDocBucketAccesses        Unsigned32,
+    wwwDocBucketDocuments       Unsigned32,
+    wwwDocBucketBytes           Unsigned32
+}
+
+wwwDocBucketIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary monotonically increasing integer number
+         used for indexing the wwwDocBucketTable. The index number
+         wraps to 1 whenever the maximum value is reached."
+    ::= { wwwDocBucketEntry 1 }
+
+wwwDocBucketTimeStamp OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The date and time when the bucket was made available."
+    ::= { wwwDocBucketEntry 2 }
+
+wwwDocBucketAccesses OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of access attempts for any document
+         provided by this WWW service during the time interval
+         over which this bucket was created."
+    ::= { wwwDocBucketEntry 3 }
+
+wwwDocBucketDocuments OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of different documents for which access
+         was attempted this this WWW service during the time interval
+         over which this bucket was created."
+    ::= { wwwDocBucketEntry 4 }
+
+wwwDocBucketBytes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of content bytes which were transferred
+         from this WWW service during the time interval over which
+         this bucket was created."
+    ::= { wwwDocBucketEntry 5 }
+
+wwwDocAccessTopNTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwDocAccessTopNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of the most frequently accessed documents in a
+         given bucket. This table is sorted by the column
+         wwwDocAccessTopNAccesses. Entries having the same number
+         of accesses are secondarily sorted by wwwDocAccessTopNBytes.
+         Entries with the same number of accesses and the same
+         number of bytes will have an arbitrary order."
+    ::= { wwwDocumentStatistics 4 }
+
+wwwDocAccessTopNEntry OBJECT-TYPE
+    SYNTAX      WwwDocAccessTopNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the top N table sorted by document accesses."
+    INDEX       { wwwServiceIndex, wwwDocBucketIndex,
+                  wwwDocAccessTopNIndex }
+    ::= { wwwDocAccessTopNTable 1 }
+
+WwwDocAccessTopNEntry ::= SEQUENCE {
+    wwwDocAccessTopNIndex             Unsigned32,
+    wwwDocAccessTopNName              WwwDocName,
+    wwwDocAccessTopNAccesses          Unsigned32,
+    wwwDocAccessTopNBytes             Unsigned32,
+    wwwDocAccessTopNLastResponseType  WwwResponseType
+}
+
+wwwDocAccessTopNIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary monotonically increasing integer number
+         used for indexing the wwwDocAccessTopNTable. The index is
+         inversely correlated to the sorting order of the table. The
+         document with the highest access count will get the index
+         value 1."
+    ::= { wwwDocAccessTopNEntry 1 }
+
+wwwDocAccessTopNName OBJECT-TYPE
+    SYNTAX      WwwDocName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The name of the document for which access was attempted."
+    ::= { wwwDocAccessTopNEntry 2 }
+
+wwwDocAccessTopNAccesses OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of access attempts for this document."
+    ::= { wwwDocAccessTopNEntry 3 }
+
+wwwDocAccessTopNBytes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of content bytes that were transmitted
+         as a result of attempts to access this document."
+    ::= { wwwDocAccessTopNEntry 4 }
+
+wwwDocAccessTopNLastResponseType OBJECT-TYPE
+    SYNTAX      WwwResponseType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocol response type which was sent to the client
+         as a result of the last attempt to access this document.
+         This object contains the type of the primary response if
+         there were multiple responses to a single request."
+    ::= { wwwDocAccessTopNEntry 5 }
+
+wwwDocBytesTopNTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF WwwDocBytesTopNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table of the documents which caused most network
+         traffic in a given bucket. This table is sorted by the
+         column wwwDocBytesTopNBytes. Entries having the same number
+         bytes are secondarily sorted by wwwDocBytesTopNAccesses.
+         Entries with the same number of accesses and the same
+         number of bytes will have an arbitrary order."
+    ::= { wwwDocumentStatistics 5 }
+
+wwwDocBytesTopNEntry OBJECT-TYPE
+    SYNTAX      WwwDocBytesTopNEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in the top N table sorted by network traffic."
+    INDEX       { wwwServiceIndex, wwwDocBucketIndex,
+                  wwwDocBytesTopNIndex }
+    ::= { wwwDocBytesTopNTable 1 }
+
+WwwDocBytesTopNEntry ::= SEQUENCE {
+    wwwDocBytesTopNIndex             Unsigned32,
+    wwwDocBytesTopNName              WwwDocName,
+    wwwDocBytesTopNAccesses          Unsigned32,
+    wwwDocBytesTopNBytes             Unsigned32,
+    wwwDocBytesTopNLastResponseType  WwwResponseType
+}
+
+wwwDocBytesTopNIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An arbitrary monotonically increasing integer number
+         used for indexing the wwwDocBytesTopNTable. The index is
+         inversely correlated to the sorting order of the table. The
+         document with the highest byte count will get the index
+         value 1."
+    ::= { wwwDocBytesTopNEntry 1 }
+
+wwwDocBytesTopNName OBJECT-TYPE
+    SYNTAX      WwwDocName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The name of the document for which access was attempted."
+    ::= { wwwDocBytesTopNEntry 2 }
+
+wwwDocBytesTopNAccesses OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of access attempts for this document."
+    ::= { wwwDocBytesTopNEntry 3 }
+
+wwwDocBytesTopNBytes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of content bytes that were transmitted
+         as a result of attempts to access this document."
+    ::= { wwwDocBytesTopNEntry 4 }
+
+wwwDocBytesTopNLastResponseType OBJECT-TYPE
+    SYNTAX      WwwResponseType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The protocol response type which was sent to the client
+         as a result of the last attempt to access this document.
+         This object contains the type of the primary response if
+         there were multiple responses to a single request."
+    ::= { wwwDocBytesTopNEntry 5 }
+
+--
+-- Conformance Definitions
+--
+
+wwwMIBCompliances OBJECT IDENTIFIER ::= { wwwMIBConformance 1 }
+wwwMIBGroups      OBJECT IDENTIFIER ::= { wwwMIBConformance 2 }
+
+wwwMinimalCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP agents which implement
+         the minimal subset of the WWW-MIB. Implementors might
+         choose this subset for high-performance server where
+         full compliance might be to expensive."
+    MODULE  -- this module
+    MANDATORY-GROUPS {
+        wwwServiceGroup,
+        wwwSummaryGroup
+    }
+    OBJECT wwwSummaryOutRequests
+    DESCRIPTION
+        "Instances of wwwSummaryOutRequests do not exist on pure
+         WWW server implementations."
+    OBJECT wwwSummaryInResponses
+    DESCRIPTION
+        "Instances of wwwSummaryOutRequests do not exist on pure
+         WWW server implementations."
+    OBJECT wwwSummaryInRequests
+    DESCRIPTION
+        "Instances of wwwSummaryInRequests do not exist on pure
+         WWW client implementations."
+    OBJECT wwwSummaryOutResponses
+    DESCRIPTION
+        "Instances of wwwSummaryOutResponses do not exist on pure
+
+         WWW client implementations."
+    ::= { wwwMIBCompliances 1 }
+
+wwwFullCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for SNMP agents which implement
+         the full WWW-MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS {
+        wwwServiceGroup,
+        wwwSummaryGroup
+    }
+    GROUP  wwwRequestInGroup
+    DESCRIPTION
+        "The wwwRequestInGroup is mandatory only for WWW server
+         or proxy server implementations."
+    GROUP wwwResponseOutGroup
+    DESCRIPTION
+        "The wwwResponseOutGroup is mandatory only for WWW server
+         or proxy server implementations."
+    GROUP wwwRequestOutGroup
+    DESCRIPTION
+        "The wwwRequestOutGroup is mandatory only for WWW client
+         or proxy server implementations."
+    GROUP wwwResponseInGroup
+    DESCRIPTION
+        "The wwwRequestOutGroup is mandatory only for WWW client
+         or proxy server implementations."
+    GROUP wwwDocumentGroup
+    DESCRIPTION
+        "The wwwDocumentGroup is mandatory only for WWW server
+         or proxy server implementations."
+    OBJECT wwwSummaryOutRequests
+    DESCRIPTION
+        "Instances of wwwSummaryOutRequests do not exist on pure
+         WWW server implementations."
+    OBJECT wwwSummaryInResponses
+    DESCRIPTION
+        "Instances of wwwSummaryOutRequests do not exist on pure
+         WWW server implementations."
+    OBJECT wwwSummaryInRequests
+    DESCRIPTION
+        "Instances of wwwSummaryInRequests do not exist on pure
+         WWW client implementations."
+    OBJECT wwwSummaryOutResponses
+    DESCRIPTION
+        "Instances of wwwSummaryOutResponses do not exist on pure
+         WWW client implementations."
+    ::= { wwwMIBCompliances 2 }
+
+wwwServiceGroup OBJECT-GROUP
+    OBJECTS {
+        wwwServiceDescription,
+        wwwServiceContact,
+        wwwServiceProtocol,
+        wwwServiceName,
+        wwwServiceType,
+        wwwServiceStartTime,
+        wwwServiceOperStatus,
+        wwwServiceLastChange
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing information about
+         the WWW services known by the SNMP agent."
+    ::= { wwwMIBGroups 1 }
+
+wwwSummaryGroup OBJECT-GROUP
+    OBJECTS {
+        wwwSummaryInRequests,
+        wwwSummaryOutRequests,
+        wwwSummaryInResponses,
+        wwwSummaryOutResponses,
+        wwwSummaryInBytes,
+        wwwSummaryInLowBytes,
+        wwwSummaryOutBytes,
+        wwwSummaryOutLowBytes
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing summary statistics
+         about requests and responses generated and received
+         by a WWW service."
+    ::= { wwwMIBGroups 2 }
+
+wwwRequestInGroup OBJECT-GROUP
+    OBJECTS {
+        wwwRequestInRequests,
+        wwwRequestInBytes,
+        wwwRequestInLastTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing detailed statistics
+         about requests received by a WWW service."
+    ::= { wwwMIBGroups 3 }
+
+wwwRequestOutGroup OBJECT-GROUP
+    OBJECTS {
+        wwwRequestOutRequests,
+        wwwRequestOutBytes,
+        wwwRequestOutLastTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing detailed statistics
+         about requests generated by a WWW service."
+    ::= { wwwMIBGroups 4 }
+
+wwwResponseInGroup OBJECT-GROUP
+    OBJECTS {
+        wwwResponseInResponses,
+        wwwResponseInBytes,
+        wwwResponseInLastTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing detailed statistics
+         about responses received by a WWW service."
+    ::= { wwwMIBGroups 5 }
+
+wwwResponseOutGroup OBJECT-GROUP
+    OBJECTS {
+        wwwResponseOutResponses,
+        wwwResponseOutBytes,
+        wwwResponseOutLastTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "A collection of objects providing detailed statistics
+         about responses generated by a WWW service."
+    ::= { wwwMIBGroups 6 }
+
+wwwDocumentGroup OBJECT-GROUP
+    OBJECTS {
+        wwwDocCtrlLastNSize,
+        wwwDocCtrlLastNLock,
+        wwwDocCtrlBuckets,
+        wwwDocCtrlBucketTimeInterval,
+        wwwDocCtrlTopNSize,
+        wwwDocLastNName,
+        wwwDocLastNTimeStamp,
+        wwwDocLastNRequestType,
+        wwwDocLastNResponseType,
+        wwwDocLastNStatusMsg,
+        wwwDocLastNBytes,
+        wwwDocBucketTimeStamp,
+        wwwDocBucketAccesses,
+        wwwDocBucketDocuments,
+        wwwDocBucketBytes,
+        wwwDocAccessTopNName,
+        wwwDocAccessTopNAccesses,
+        wwwDocAccessTopNBytes,
+        wwwDocAccessTopNLastResponseType,
+        wwwDocBytesTopNName,
+        wwwDocBytesTopNAccesses,
+        wwwDocBytesTopNBytes,
+        wwwDocBytesTopNLastResponseType
+    }
+    STATUS  current
+    DESCRIPTION
+        "A collection of objects providing information about
+         accesses to documents."
+    ::= { wwwMIBGroups 7 }
+
+END
diff --git a/snmp_builder/snmp_builder.js b/snmp_builder/snmp_builder.js
index dc3758e..6c0368a 100644
--- a/snmp_builder/snmp_builder.js
+++ b/snmp_builder/snmp_builder.js
@@ -220,7 +220,7 @@ function onSaveItems(e)
 	
 	if (itemlist.data.size() === 0)
 		return;
-	json = itemlist.data.toJSON();
+        json = itemlist.data.toJSON();
 	var get_oid_url = 'snmp_builder.php?save=1&output=json';
 	new Ajax.Request(get_oid_url, {
 		method: 'post',
@@ -258,4 +258,4 @@ function onViewType(e)
 {
 	var viewtype = $F($('viewtype')); // 0: autodetect, 1:table;
 	clickTree(oidview._oid, oidview._idx, viewtype);
-}
\ No newline at end of file
+}